# Copyright (c) P.J.Gawthrop, 1989, 1990, 1991, 1993, 1994, 1995, 1996, 1997,1998,1999

###############################################################
## Version control history
###############################################################
## $Header$
## $Log$
## Revision 1.226  2000/02/10 18:51:31  peterg
## Included OFF exp; in subs.r default
##
## Revision 1.225  2000/02/10 15:03:10  peterg
## Put subs.r file into the m-code generation -- allows the off exp;
## switch for simpler expresions.
##
## Revision 1.224  2000/02/08 10:27:04  peterg
## Removed obselete .h stuff
##

verbose=' -s'

# Default integration method
integration_method=implicit;

# Default no info
info_switch=''

# Default use m, not oct files
m='m';

#Initialise list
mtt_switches='';


#Look for a command line argument
while [ -n "`echo $1 | grep '^-'`" ]; do

                Solve='-A';;
	-abg )
                mtt_switches="$mtt_switches $1";
                start_at_abg='yes';;
	-stdin )
                mtt_switches="$mtt_switches $1";
                stdin=stdin;;
	-oct )
                mtt_switches="$mtt_switches $1";
                m='oct';;
        --version)                
                  echo 'MTT version' $version; exit;;
        --versions)                
                mtt_versions; exit;;
	*)
		echo "$1 is an invalid argument - ignoring" ;;
  esac

    echo '         -abg start at abg.m representation'
    echo '         -c  c-code generation'
    echo '         -d  <dir>  use directory <dir>'
    echo '         -dc Maximise derivative (not integral) causality'
    echo '         -dc Maximise derivative (not integral) causality'
    echo '         -i implicit   Use implicit integration'
    echo '         -i euler      Use Euler integration'
    echo '         -o ode is same as dae'
    echo '         -oct use oct files in place of m files where appropriate'
    echo '         -p  print environment variables'
    echo '         -r  reset time stamp on representation'
    echo '         -s  try to generate sensitivity BG (experimental)'
    echo '         -ss use steady-state info to initialise simulations'
    echo '         -stdin read input data from standard input for  simulations'
    echo '         -t  tidy mode (default)'
    echo '         -u  untidy mode (leaves files in current dir)'

#SUMMARY simp	simplification information (r)
$1_simp.r:
	echo Creating $1_simp.r
	( \
	echo "%% Reduce commands to simplify output for system $1 ($1_simp.r)"; \
	cat $MTTPATH/trans/m/rcs_header.txt; \
	echo 'END;'; \
	)> $1_simp.r

#SUMMARY subs  algebraic substitution (r)
$1_subs.r:
	echo Creating $1_subs.r
	( \
	echo "%% Reduce  substitution statements for system $1 ($1_subs.r)"; \
	cat $MTTPATH/trans/m/rcs_header.txt; \
	echo "OFF exp; % Don't expand expressions"; \
	echo 'END;'; \
	)> $1_subs.r

#SUMMARY obspar  GPC observability function parameters (r)
$1_obspar.r:
	echo Creating $1_obspar.r
	( \
	echo "%% Reduce  GPC observability function parameters for system $1 ($1_obspar.r)"; \
	cat $MTTPATH/trans/m/rcs_header.txt; \

	echo 'Matrix MTTUU(1,5);'; \
	echo 'MTTUU(1,1) := MTTu1;'; \
	echo 'MTTUU(1,2) := MTTu11;'; \
	echo 'MTTUU(1,3) := MTTu12;'; \
	echo 'MTTUU(1,4) := MTTu13;'; \
	echo 'MTTUU(1,5) := MTTu14;'; \
	echo 'END;'; \
	)> $1_obspar.r

#SUMMARY simpar	simulation information (txt)
$1_simpar.txt:
	echo Creating $1_simpar.txt
	( \
	echo '# -*-octave-*- Put Emacs into octave-mode'; \
	echo "# Simulation parameters for system $1 ($1_simpar.txt)"; \
	echo "# Generated by MTT on" `date`.; \
	cat $MTTPATH/trans/rcs_header.sh; \
	echo ;\
	echo 'LAST        = 10.0;       # Last time in simulation'; \
	echo 'DT          = 0.1;        # Print interval'; \
	echo 'STEPFACTOR  = 1;          # Integration steps per print interval'; \
	echo 'WMIN        = -1;         # Minimum frequency = 10^WMIN'; \
	echo 'WMAX        = 2;          # Maximum frequency = 10^WMAX'; \
	echo 'WSTEPS      = 100;        # Number of frequency steps'; \
	echo 'INPUT       = 1;          # Index of the input'; \
	)> $1_simpar.txt

#SUMMARY simpar	simulation information (m)
$1_simpar.m: $1_simpar.txt
	txt2m $1 simpar


#SUMMARY numpar	numerical parameter declaration -- default (txt) 

 $1_params.r: 
	echo Creating $1_params.r
	( \
	echo "%% Parameter file for system $1 ($1_params.r)"; \
	echo "%% This file provides symbolic parameters for simplification";\
	cat $MTTPATH/trans/m/rcs_header.txt; \
	echo 'END;'; \
	)> $1_params.r


#SUMMARY sspar	steady-state definition (r)
$1_sspar.r: 
	struc2sspar_txt2r $1

#SUMMARY sspar	steady-state parameters (tex)

endif

$1_ode.m: $1_def.m $1_ode.r  $1_subs.r $1_sympars.txt
	mtt_r2m $1 ode m; matlab_tidy $1_ode.m

$1_ode.oct: $1_def.r $1_ode.p $1_sympars.txt
	mtt_p2oct $1 ode

$1_odeo.oct: $1_def.r $1_odeo.p $1_sympars.txt
	mtt_p2oct $1 odeo

$1_odea.m: $1_ode.m
	touch $1_odea.m
$1_odeo.m: $1_ode.m
	touch $1_odeo.m
#$1_ode.c: $1_def.r $1_ode.r $1_sympar.r $1_sympar.c
#	ode_r2c $1 
$1_ode.tex: $1_ode.r  $1_sympar.r $1_simp.r
	ode_r2tex $1; latex_tidy $1_ode.tex

# The main simulation programme
ifeq ($integration_method,implicit)
$1_ode2odes.m : $1_def.r $1_sympars.txt $1_smx.m\
		$1_simpar.m $1_numpar.m $1_state.m $1_input.m \
		$1_cse.m $1_cseo.m  $1_switchopen.m
	make_ode2odes $1 $integration_method
endif
ifeq ($integration_method,euler)
$1_ode2odes.m : $1_def.r $1_sympars.txt\
		$1_simpar.m $1_numpar.m $1_state.m $1_input.m \
		$1_ode.$m $1_odeo.$m  $1_switchopen.m
	make_ode2odes $1 $integration_method
endif


#Conversion of m to p to c
#SUMMARY ode	ordinary differential equations (c)
#SUMMARY ode	ordinary differential equations (p)

$1_smx.p : $1_def.r $1_smx.m
	mtt_m2p $1_smx.m
$1_switchopen.p : $1_def.r $1_switchopen.m
	mtt_m2p $1_switchopen.m

ifeq ($integration_method,implicit)
$1_ode2odes.p : $1_ode2odes.m $1_def.r $1_smx.p\
		$1_simpar.p $1_numpar.p $1_state.p $1_input.p \
		$1_cse.p $1_cseo.p  $1_switchopen.p
	mtt_m2p $1_ode2odes.m $integration_method $stdin
endif
ifeq ($integration_method,euler)
$1_ode2odes.p : $1_ode2odes.m $1_def.r\
		$1_simpar.p $1_numpar.p $1_state.p $1_input.p \
		$1_ode.p $1_odeo.p  $1_switchopen.p
	mtt_m2p $1_ode2odes.m $integration_method $stdin
endif

$1_ode2odes.c: $1_ode2odes.p 
	mtt_p2c $info_switch $1 ode2odes

#SUMMARY obs	observer equations for CGPC (r)

1_odes.c: $1_ode.c $1_def.r $1_sympar.r
	ode2odes_r2c $1 
$1_sms.c: $1_sm.c $1_def.r $1_sympar.r
	sm2sms_r2c $1

ifeq ($computation,octave)
$1_odes.dat2: $1_ode2odes.m $1_ode.m $1_numpar.m $1_switchopen.m  \
	     $1_def.m $1_input.m $1_state.m $1_simpar.m
	time octave_ode2odes $1
endif

ifeq ($computation,c)
$1_ode2odes.out: $1_ode2odes.c
	echo Creating $1_odes.out
	$CC $1_ode2odes.c  -lm -o $1_ode2odes.out