# Copyright (C) 2001 by Peter J. Gawthrop

###############################################################
## Version control history
###############################################################
## $Header$
## $Log$
## Revision 1.332  2002/04/26 23:19:00  geraint
## Fixed path to info files for "mtt info".
##
## Revision 1.331  2002/04/19 09:24:29  gawthrop
## 2 changes to ode2odes_out generation: only compiles the specified c
## file; outside the computation=c clause
##
## Revision 1.330  2002/04/17 10:03:12  geraint
## Marked .sg as a major representation.
##

  rm -fr MTT_work
  exit
fi

# Recursively clean up
if [ "$1" = "rclean" ]; then
  echo 'Removing intermediate files recursively'
  dir2paths '.' | gawk '{print "mtt -q -d " $1 " clean " $2}' | sh
  exit
fi

# The big clean up
if [ "$1" = "Clean" ] && [ "$2" = "" ]; then
  echo 'Removing all generated files for all systems'
  rm -f *.log  mtt_info.txt warning.txt

     documenttype=article
      # See if we are making a book -- ie representation rep on a directory
     isMTT_work=`pwd | grep 'MTT_work'`
      if [ -n "$isMTT_work" ]; then
	dotdot='../'
      fi  
  
     #isdirectory=`file $dotdot$1 | gawk '{print $2}' | grep directory`
     if [ -d "$dotdot$1" ]; then
	documenttype=book
     fi
else
     documenttype=section
fi

      echo Component $name exists already - no action taken
    fi
  else
    if [ $source = "." ]; then
      cp -u *_*.* ${destination}
    else
      comp_path=`mtt_find $source $2 path_only`
      n_found=`echo $comp_path | wc | gawk '{print $2}'`

      if [ "$n_found" = "1" ]; then
         echo Copying $2 from $comp_path to ${destination}
         cp $comp_path/*_*.* ${destination}
         exit 0
      elif [ "$n_found" = "0" ]; then
	if [ "$quiet" != "quiet" ]; then    

if [ -n "$sensitivity" ]; then
  sys_s=`echo $1 | cut -c 2-`
  sys_abg=${sys_s}_abg
fi

## Check octave version
case `$MATRIX --version | gawk -F\. '{print $2}'` in
    0) define_octave_dev="";;			# stable 
    1) define_octave_dev="-DOCTAVE_DEV";;	# development
    *) define_octave_dev="-DOCTAVE_DEV";;
esac

################################
# This is the main mtt programme

    mtt="mtt-$1"
    dirs=$mtt
fi

## Create appropriate filename
case $format in
    date)
         filename=`date | gawk '{printf("%s_%s%s_%s.tgz\n", mtt, $2,$3,$6)}' mtt=$mtt`;
	 shift
	;;
    version)
         filename=`mtt --version | gawk '{printf("%s-%s.tar.gz\n", mtt, $NF)}' mtt=$mtt`;
	 shift
	;;

    *)

esac

    exit    
fi

# Listing files to ignore
#echo Finding irrelevant files
#find $dirs -name '*.*' -print |\
#  grep 'dvi$\|ps$\|gif$\|log$\|dat$\|MTT_work\|core\|~$' >IGNORE
#wc IGNORE | gawk '{print "Ignoring", $1, "files"}'

#echo examples >> IGNORE

#Inform user
echo Backing up $dirs to $filename

#Tar the files
#tar --exclude-from IGNORE --create --gzip --file $filename $dir
tar --create --gzip --file $filename $dirs
#Size info
ls -l $filename
#

# Copyright (c) P.J.Gawthrop 1996

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.7  2000/10/03 18:29:57  peterg
## *** empty log message ***
##
## Revision 1.6  1998/07/17 19:47:35  peterg
## Minor changes
##
## Revision 1.5  1998/07/17 07:50:33  peterg
## Now handles library name
## Returns a status
##   0 if exactly one result

    fi
  find $thepath -maxdepth 1 -name $fullname  -printf $format;
 done |\
 tee mtt_junk
fi

# Check exit status and return 
hits=`wc mtt_junk | gawk '{print $1}'`
rm -f mtt_junk

if [ $hits = "1" ]; then
    exit 0
elif [ $hits = "0" ]; then
    exit 1
elif [ $hits > "1" ]; then

# Copyright (c) P.J.Gawthrop 1996

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.14  2000/10/03 18:29:26  peterg
## crs now works after a fashion
##
## Revision 1.13  2000/04/04 15:22:44  peterg
## Major changes: simple components now work
## Single components now work
##
## Revision 1.12  1998/07/21 08:47:59  peterg
## Default null $2 (regexp) to '^' - ie match any line
##

         echo $comment $blurb
         mtt2reps_txt

	;;
    crs)
	echo  $comment $blurb
        find $find_path -name "$name" -print |\
        gawk '{print "grep", key, $1}' key=$key | sh |\
        sed "s/$key //" | $sort
	;;
    *)
	
    fullnames=`mtt_find $find_path "$name" | gawk '{printf("%s/%s\n",$1,$2)}'`
    N=`echo $fullnames | wc -w`;
    if [ -z "$fullnames" ]; then
	echo $comment No $blurb found.
    else
    echo $comment $N $blurb found.
    for fullname in $fullnames; do
        name=`basename $fullname`
	if [ -n "$other" ]; then
	cat $fullname | egrep $key 
	else
        info=`cat $fullname | egrep $key | gawk '{for (i=2;i<=NF;i++) print $i}'`
	category=`echo $fullname |   sed "s!$find_path/!!" ` 
        category=`dirname $category`
	echo $category $name $info
	fi
    done
    fi
  esac
exit


  gawk '{print "cat " $1 "/" $2}'  | sh |\
  egrep $key  | egrep $regexp  |\
  sed "s/$summary[	]*//" |\
  sed "s/$description[	]*/  /" |\
  sed "s/$alias[	]*/  Alias: /" |\
  sed "s!$find_path/!!" |\
  $sort

# Copyright (c) P.J.Gawthrop 1998

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.2  2000/11/13 21:40:26  peterg
## Sorted out the non-gnu
##
## Revision 1.1  1998/05/28 09:24:41  peterg
## Initial revision
##
###############################################################

echo Versions of mtt and its components on `date`

## gnu standard --version
mtt_version mtt

echo Doing the GNU components
mtt_version gawk
mtt_version basename
mtt_version cat
mtt_version cp
mtt_version dirname
mtt_version gcc
mtt_version grep
mtt_version head

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.26  2002/04/26 16:16:33  geraint
## Removed unnecessary variables PLAT and GCCVERS.
##
## Revision 1.25  2002/04/02 09:16:39  geraint
## Tidied up library search paths, now assumes that system libraries are set up correctly.
## For Debian, this means installing the following: blas-dev, fftw-dev, lapack-dev, libncurses5-dev, libkpathsea-dev, libreadline-dev
## It may also be necessary to run /sbin/ldconfig on the relevant directories (especially Octave's).
##
## Revision 1.24  2001/10/15 14:28:35  gawthrop
## Now has . at start of components library path $MTT_COMPONENTS

    # include paths

    IOCTAVE="-I${PREFIX}/include/octave/ -I${PREFIX}/include/octave/octave"

    # library paths

    OCTAVEVERS=`octave --version | gawk '{ print $4 }'`
    LOCTAVE="-L${PREFIX}/lib/octave-${OCTAVEVERS} -loctave -lcruft -loctinterp"
    LSYSTEM="-ldl -lm -lncurses -lkpathsea -lreadline -lblas -llapack -lfftw -lg2c"

    # compiler options

    DEBUG="-g"
    OPTIM="-O3"

# $1           $2       $3       $4         $5        $6     $7

cat <<EOF >> ${ICD}

${comment} Inputs

EOF
for name in `cat ${txt} | gawk '($1 == "Input:") { print $3 }'`
do
    num=`grep ${name} ${struc} | gawk '($1 == "input") { print $2 }'`
    grep ^Input ${txt} |\
	gawk '($3 == name) { printf ("\tmttu%c%d%c\t= %s;\n", lb, num-offset, rb, $2) }'\
	lb=${lb} rb=${rb} name=${name} num=${num} offset=${offset} >> ${ICD}
done

cat <<EOF >> ${ICD}

${comment} Outputs

EOF
for name in `cat ${txt} | gawk '($1 == "Output:") { print $3 }'`
do
    num=`grep ${name} ${struc} | gawk '($1 == "output") { print $2 }'`
    grep ^Output ${txt} |\
	gawk '($3 == name) { printf ("\t%-30s = mtty%c%d%c;\n", $2, lb, num-offset, rb) }'\
	lb=${lb} rb=${rb} name=${name} num=${num} offset=${offset} >> ${ICD}
done

rm -f mtt_error


# This is the main transformation using awk 
# And remove crs with same name as system
grep 'cr = ' $1_abg.m | gawk '
BEGIN {
# Include lin cr anyway.
print "lin"
}
{
  crs=substr($3,2,length($3)-3);
    N=split(crs,cr,";");

# Acausal bond graph to causal bond graph: mfile format

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.25  2001/10/15 14:27:00  gawthrop
## Now handles [1:N] style port labels
##
## Revision 1.24  2001/08/02 03:24:48  geraint
## Replaced mtt_version.sh with mtt_banner.sh - I think this was the intent.
##
## Revision 1.23  2001/07/26 04:08:35  gawthrop
## Removed lines deleting _type.sh and cbg.m
##  -- how did they get there ??
##

}

create_lbl_body()
{

## Find names of all components
grep -v '\[[0-9]*:[0-9]*\]' $1_abg.fig  |\
gawk '/:/ {print $NF}'  | \
sed 's/\\001//' | \
sort | \
tee $1_raw_list | \
sort -u> $1_unique_raw_list


#Write out non-unique names
#echo 'Non-unique names (if any):'
#diff $1_unique_raw_list  $1_raw_list | grep '>' | sed 's/>/	/'

#Write out the outline lbl file
grep -v  '\[[0-9]*\]'  $1_unique_raw_list | \
gawk --field-separator ':' '
 BEGIN {
    OldComponent="None";
    default_cr = "lin";
 }
 { 
  Component = $1;
  Name = $2;

create_arg_aliases()
{
cat <<EOF

## Argument aliases
EOF
abg2sympar_m2txt ${system} ${system} use_label_file |\
gawk '{printf("#ALIAS\t$%i\t%s\n", ++i, $1)}'
}

## Main 

create_lbl_body $1> $1_lbl.txt
create_arg_aliases > mtt_args.txt # using $1_lbl.txt
mv $1_lbl.txt mtt_junk_lbl.txt

# Acausal bond graph to causal bond graph: mfile format

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.1  2000/12/28 12:18:40  peterg
## Initial revision
##
###############################################################


# P.J.Gawthrop March 1997
# Copyright (c) P.J.Gawthrop, 1997

infofile='mtt_info.txt'
typefile="$1_type.sh"

# Remove the old log file
rm -f abg2sabg_fig.log
rm -f $1_cbg.m
rm -f $typefile
rm -f $infofile


#Inform user
echo Creating $1_sabg.txt

gawk '{\
    Depth=7;\
    print $Depth}' $1_abg.fig

    echo "Looking for $1 in library"
    mtt -q  compcopy $1  
fi


echo Creating $sfilename   

gawk '
  function modulo10(x) {
    return x-int(x/10)*10
    }
  {

  level_index = 4;
  if ( match($NF,"001")&&(modulo10($level_index)==0)&&(index($NF,"[") != 1) ){

  ######################################
  
  ###############################################################
  ## Version control history
  ###############################################################
  ## $Id$
  ## $Log$
  ## Revision 1.4  2002/04/22 10:25:47  gawthrop
  ## Handles unnamed components & ingnores artwork
  ##
  ## Revision 1.3  2001/10/15 14:27:34  gawthrop
  ## Now handles [1:N] style port labels
  ##
  ## Revision 1.2  2001/07/23 23:26:23  gawthrop
  ## Removed some boring user feedback
  ##
  ## Revision 1.1  2001/06/11 19:47:49  gawthrop
  ## Makes the sub.sh file directly from the abg.fig file
  ## Used for making lbl files (abg2lbl_fig2txt)
  ##
  ##
  ###############################################################

# Copyright (C) 1996--2002 by Peter J. Gawthrop



get_valid_components()

{
gawk '
function modulo10(x) {
  return x-int(x/10)*10
    }
BEGIN{
  polyline = 2;
  text = 4;
  compound_object = 6;

echo "# Generated by MTT on `date`."	>> $1_sub.sh
echo					>> $1_sub.sh

# Get a list of all components from the _abg file
get_valid_components $1 |\
grep -v '\[[0-9]*:[0-9]*\]' |\
grep -v '\[.*\]' |\
gawk '{if ($1==4) split($14,a,":"); print a[1]}'  |\
sed 's/\\001//' |\
sort -u > mtt_tmp1

# Remove all components starting with 0 or 1
grep -v '^[01]' < mtt_tmp1 > mtt_tmp4

# Get a list of all standard simple components
ls $MTT_LIB/comp/simple |\
  gawk '/_cause.m/{split($1,a,"_");print(a[1])}'  >mtt_tmp2

# Get a list of all standard compound components
#ls $MTTPATH/comp/compound |\
#  gawk '/_abg.m/{split($1,a,"_");print(a[1])}'  >> mtt_tmp2

# Sorted combined list
cat mtt_tmp2 | \
  sed  's/^zero$/0/' |\
  sed  's/^one$/1/' |\
  sort -u >mtt_tmp3

# Print the non-standard components
comm mtt_tmp4 mtt_tmp3 |\
  gawk 'BEGIN{FS="\t"}{if (length($1)>0) print "$1" $1 "$2"}' \
  >>$1_sub.sh

# Clean up mtt_tmp files
#rm -f mtt_tmp?

# Copyright (C) 2000 by Peter J. Gawthrop

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.3  2000/10/03 11:34:53  peterg
## Correct $MTT_LIB
##
## Revision 1.2  2000/03/17 09:53:10  peterg
## Removed irritating echo Using "$1_sub.sh"
##
## Revision 1.1  2000/03/15 21:23:20  peterg
## Initial revision
##
###############################################################

echo '# Commands to generate subsystem representations'>  $1_sub.sh
echo "# File $1_sub.sh"			>> $1_sub.sh
echo "# Generated by MTT on `date`."	>> $1_sub.sh
echo					>> $1_sub.sh

# Get a list of all components for the _abg file
gawk '/type = / {print substr($3,2,length($3)-3)}' $1_abg.m |\
sort -u > mtt_tmp1

# Remove all components starting with 0 or 1
grep -v '^[01]' < mtt_tmp1 > mtt_tmp4

# Get a list of all standard simple components
echo ls $MTT_LIB/comp/simple
ls $MTT_LIB/comp/simple |\
  gawk '/_cause.m/{split($1,a,"_");print(a[1])}'  >mtt_tmp2

# Get a list of all standard compound components
#ls $MTTPATH/comp/compound |\
#  gawk '/_abg.m/{split($1,a,"_");print(a[1])}'  >> mtt_tmp2

# Sorted combined list
cat mtt_tmp2 | \
  sed  's/^zero$/0/' |\
  sed  's/^one$/1/' |\
  sort -u >mtt_tmp3

# Print the non-standard components
comm mtt_tmp4 mtt_tmp3 |\
  gawk 'BEGIN{FS="\t"}{if (length($1)>0) print "$1" $1 "$2"}' \
  >>$1_sub.sh

# Clean up mtt_tmp files
#rm -f mtt_tmp?

REPS='[,*]'

SystemName=$2
UseLabelFile=$3

if [ -n "$UseLabelFile" ]; then ## Take input from lbl.txt
     strip_comments < $1_lbl.txt  | tr $SEPS $REPS |\
     gawk '{printf("%s %s \"%s\",\n",$1,$2,$3)}' > mtt_stripped_file
else ## Take input from _abg.m
     cat $1_abg.m | grep "arg =" | tr $SEPS $REPS > mtt_stripped_file
fi

rm -f mtt_error
# This is the main transformation using gawk
cat mtt_stripped_file | \
gawk '
function exact_match(name1, name2) {
  return ((match(name1,name2)>0)&&(length(name1)==length(name2)))
}

function matches(names, name) {
  n_matches = split(names,match_name);
  matched = 0;

# Copyright (c) P.J.Gawthrop, 1997.

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.3  2001/07/12 04:02:53  gawthrop
## Now fixes multiports for input and output as well as state
##
## Revision 1.2  2000/11/27 17:45:00  peterg
## Removed "System" from  heading
##
## Revision 1.1  2000/11/27 15:11:15  peterg
## Initial revision
##
## Revision 1.7  1997/12/06 16:20:37  peterg

 \index{\textbf{$1} -- subsystems} 
EOF
cat $1_sub.tex   >> $filename

#Now do the subsystems (if at top level)
if [ -z "$2" ]; then
 sub2subs $1 | sort -u | \
  gawk '{print "abg2tex", pdf, $1, filename}' pdf=$pdf filename=$filename | sh
fi

# Copyright (c) P.J.Gawthrop 1998

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.2  1998/07/02 19:16:03  peterg
## Prettyfied output
##
## Revision 1.1  1998/07/02 09:21:55  peterg
## Initial revision
##
###############################################################


# Inform user
echo Creating $1_alias.m

#Create the alias file complete with headers.
echo "function alias = $1_alias" > $1_alias.m
echo "%% Alias file ($1_alias.m)" >> $1_alias.m
echo "%% Generated by MTT at `date`" >> $1_alias.m

#Write out the variables 
gawk '{
       if (NF==2) {i++; print "alias."$1 "\t = \""$2"\";"}
     
     }
     END{
       if (i==0) print "alias = 0;"
        }' $1_alias.txt >> $1_alias.m

###############################################################
## Version control history
###############################################################
## $Id$
##
## $Log$
## Revision 1.31  2001/07/13 04:54:04  geraint
## Branch merge: numerical-algebraic-solution back to main.
##
## Revision 1.30  2001/07/12 04:02:53  gawthrop
## Now fixes multiports for input and output as well as state
##
## Revision 1.29.2.1  2001/06/26 22:29:05  geraint
## mtt_xargs.sh eliminates Arg list too long error for large models.
## (UNIX xargs does not work if the environment is too large).
##

}


get_indices ()
{
  sys=$1
  which=$2
  gawk '{if ($1==which) print $2}' which=$which < ${sys}_struc.txt
}

convert_indices ()
{
  sys=$1
  Which="input output state"
  for which in $Which; do

# Sort the struc file
mv $structurefile junk
sort -k 1,1 -k 2,2n junk >$structurefile

# Relabel states with multiple ports
relabel_multiple_definitions(){
  mv $structurefile junk
  gawk '
  BEGIN{
     var_type_index=1;  
     oldname="";
  }
  {
     name=$4;
     newname=name;

# Copyright (c) P.J.Gawthrop 1998

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.1  2000/12/28 12:20:04  peterg
## Initial revision
##
###############################################################

# Inform user
echo Revising $1_cmp.m

# Copy the alias and cmp files.
cat $1_alias.txt $1_cmp.m > junk

#Create the cmp file complete with headers.
#echo "# Component file ($1_cmp.m)" #> $1_cmp.m
#echo "# Revised by MTT at `date`" #>> $1_cmp.m

#Write out the variables 
gawk '
BEGIN{
alias_file=1
Parameter_Regexp = "^_Parameter_"
Line_Regexp = "cr|arg"
quote = "\047"
}
{

# Copyright (c) P.J.Gawthrop 1996.

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.8  2000/10/03 11:34:29  peterg
## Put in correct $MTT_LIB
##
## Revision 1.7  2000/01/18 14:22:58  peterg
## Now exits if file already exists
##
## Revision 1.6  1999/08/25 21:20:07  peterg
## Don't list components starting with 0 ot 1
##
## Revision 1.5  1996/11/09 21:09:43  peterg

echo '# Commands to generate subsystem representations'>  $1_sub.sh
echo "# File $1_sub.sh"			>> $1_sub.sh
echo "# Generated by MTT on `date`."	>> $1_sub.sh
echo					>> $1_sub.sh

# Get a list of all components for the _cmp file
gawk '/comp_type = / {print substr($3,2,length($3)-3)}' $1_cmp.m |\
sort -u > mtt_tmp1

# Remove all components starting with 0 or 1
grep -v '^[01]' < mtt_tmp1 > mtt_tmp4

# Get a list of all standard simple components
ls $MTT_LIB/comp/simple |\
  gawk '/_cause.m/{split($1,a,"_");print(a[1])}'  >mtt_tmp2

# Get a list of all standard compound components
#ls $MTTPATH/comp/compound |\
#  gawk '/_abg.m/{split($1,a,"_");print(a[1])}'  >> mtt_tmp2

# Sorted combined list
cat mtt_tmp2 | \
  sed  's/^zero$/0/' |\
  sed  's/^one$/1/' |\
  sort -u >mtt_tmp3

# Print the non-standard components
comm mtt_tmp4 mtt_tmp3 |\
  gawk 'BEGIN{FS="\t"}{if (length($1)>0) print "$1" $1 "$2"}' \
  >>$1_sub.sh

# Clean up mtt_tmp files
#rm -f mtt_tmp?

# Copyright (c) P.J.Gawthrop, 1997.

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.12  2002/04/08 17:04:21  geraint
## Removed spurious "\n" from output.
##
## Revision 1.11  2000/08/01 07:34:33  peterg
## Replaced printf by echo
##
## Revision 1.10  2000/02/25 09:10:12  peterg
## Changed -e to -f in if [ -f "$crf" ]; then
##  -- cuased probs on SUN
##

    echo  >> $crfile

    # Recursively create subsystem CR files -- at lower level
    sh $1_sub.sh 'cr_txt2r ' ' _lower' 
    
    # Include subsystem CR files
    sh $1_sub.sh 'echo ' "_cr.r" |\
    gawk '{
      print "in \"" $1 "\";"
    }'  >> $crfile

##  if [ -z "$level" ]; then

    # Copy .cr files
    gawk '{
	 if (NF>0) {
         print "mtt -q -u crcopy " $1; 
         }
    }' $1_cr.txt  | sh

    # Include the .cr files
#    gawk '{
#	 if (NF>0) {
#         print "in \"" $1 ".cr\";"
#         }
#    }' $1_cr.txt  >> $crfile

    ## list of the crs
    crs=`cat $1_cr.txt`

system_scse=$1_scse.r

# Parameters
n=`echo $2 | sed 's/,/ /g' |wc -w` ## Number of parameters

## Parameter information for reduce.
parameters=`echo $2 | sed 's/,/ /g' |\
 gawk '{
   for (i=1; i<=NF; i++) {
      printf("mttpar(%i,1) := %s;\n", i, $i);
      printf("mttcoef(%i,1) := %ss;\n", i, $i);
   }
  }'`

## Update sympar list.
echo Recreating $1_sympar.txt
# Zap any sensitivity coeficients
mv $1_sympar.txt mtt_junk
grep -v MTT_Sensitivity_Coefficients mtt_junk > $1_sympar.txt

# Create the new sens coeffs at end of list.
echo $2 | sed 's/,/ /g' |\
gawk '{
   for (i=1; i<=NF; i++) {
      printf("%ss\tMTT_Sensitivity_Coefficients\n",$i);
   }
  }' >> $1_sympar.txt

touch $1_sympar.txt

matrix="matrix mttpar("$n",1); matrix mttcoef("$n",1);"

# Number of states
Nx=`grep "MTTNx " <$system_def | gawk '{print $3}' | sed 's/;//'`

#Inform user
echo Creating $system_scse "(for parameters $2, $Nx states)"

# Remove the old log file
rm -f cse2scse_r.log

## Now reorganise the  states
mv -f $system_scse mtt_junk


##echo "Nx = $Nx"
gawk '{
  ## Make sure all MTTn variables are followed by a space
  gsub(/mttx[0-9]*/, "& ");

  for (i=Nx;i>0;i--) {

    state = sprintf("mttx%i ",i);
    newstate = sprintf("mttx%i ",2*i-1);

# Copyright (c) P.J.Gawthrop 1991, 1992, 1994.

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.19  2001/10/26 01:01:49  geraint
## fixcc when rdae_is_dae (-cr).
##
## Revision 1.18  2001/10/05 23:37:32  geraint
## Fixed assignment statement in ae.r when RHS=0.
##
## Revision 1.17  2001/07/27 23:29:10  geraint
## Optimises only when requested (-opt).
##
## Revision 1.16  2001/07/13 04:54:04  geraint

touch $1_cseo.r2
cat $1_cse.r1 $1_cse.r2  > $1_cse.r
cat $1_csex.r1 $1_csex.r2  > $1_csex.r
cat $1_cseo.r1 $1_cseo.r2  > $1_cseo.r

if [ "$solve" = "1" ]; then
    echo "Setting MTTNyz=0 in $1_def.r and updating other $1_def files"
    gawk '{
     if ($1=="MTTNyz") 
       print "MTTNyz := 0;" 
     else print $0
    }' $1_def.r > mtt_junk
  # Make sure it preserves the time stamp!!
  # and remove dependent reps
   touch -r $1_def.r mtt_junk
   mv mtt_junk $1_def.r
   for file in `ls $1_def.*`; do
      if [ $file != $1_def.r ]; then
          ext=`echo $file|gawk -F\. '{print $2}'`
          mtt -q $1 def $ext
      fi
   done
fi


# Now invoke the standard error handling.
mtt_error_r dae2cse_r.log

# Copyright (c) P.J.Gawthrop 1999

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.10  2000/10/17 12:24:02  peterg
## Three argument generic version
##
## Revision 1.9  2000/09/27 16:12:50  peterg
## Use expr to evaluate arithmetic - compatible with sh (as opposed to
## bash)
##
## Revision 1.8  2000/09/21 10:07:06  peterg
## Now correctely writes out the state into _odes.dat rep.
##

    *)
	First=1; Last=`expr $Ny + 1`
        ;;
esac

echo Creating $1_$2$3.dat

gawk '{
      ## Extract the data
      if (index($1,"#") != 1){
        for (i=First;i<=Last;i++)
	  printf("%s ", $i);
      printf("\n"); 
  }
}' First=$First Last=$Last <$1_$2s.dat2  > $1_$2$3.dat

{
    echo ''
    echo '</sgw:Worksheet>'
}

write_column_headings ()
{
    gawk '{ printf ("  <sgw:Column No=\"%d\" Width=\"80\" Title=\"%s\" Format=\"0\" Precision=\"3\">\n  </sgw:Column>\n", NR-1,$0) }'
}

write_output_headings ()
{
    sys=$1
    ${MATRIX} -q <<EOF | write_column_headings
	[u_names,y_names,x_names] = ${sys}_struc;

EOF
}

file=${sys}_odes.sg

NX=`mtt_getsize ${sys} x`
NY=`mtt_getsize ${sys} y`
NTMP=`wc -l ${sys}_odes.dat2 | gawk '{print $1}'`
NROW=`expr ${NTMP} - 4`		# 4 comment lines in mtt_data

{
    write_project_header
    # states
    write_worksheet_header	"X_${sys}" ${NX} ${NROW}
    write_state_headings	${sys}

# Copyright (c) P.J.Gawthrop, 1997.

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.2  2002/04/16 11:36:03  gawthrop
## These were flagged with M on cvs update
##
## Revision 1.1  2000/12/28 12:26:15  peterg
## Put under RCS
##
## Revision 1.8  1998/09/29 20:01:27  peterg
## 4th argument for nyquist style files - ie differnt x for each y
##
## Revision 1.7  1997/12/04 22:10:32  peterg

# ie stack two columns vertically separated by blank lines

#Get the desired data index
which=`name2index $1 "$3"`
echo $1 $3 $which

if [ -z "$DifferentX" ]; then
gawk '
BEGIN{
  row=0; col=0;
}
{ 
  if (row==0) {
     N=split(which,Which,",");
    }

  if (col<=cols) {
    printf("\n")
  }
  }
}'  which="$which" <$1_$2.dat >   $1_$2.gdat

else
gawk '
BEGIN{
  row=0; col=0;
}
{ 
  row++; cols=NF/2
    for (i=1; i<=cols; i++) {
      ycol=2*i;

# Copyright (c) P.J.Gawthrop, 1998.

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.1  2001/04/16 22:22:06  geraint
## *** empty log message ***
##
## Revision 1.1  1999/03/29 03:35:13  peterg
## Initial revision
##
###############################################################




# This is the main transformation using awk
gawk '{
    i++
    for (j=1;j<=NF;j++)
	data[i,j]=$j;
    Cols=NF;
    Rows++;
}
END{

# Copyright (C) 2000 by Peter J. Gawthrop

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.9  2001/07/27 23:29:10  geraint
## Optimises only when requested (-opt).
##
## Revision 1.8  2001/07/13 04:54:04  geraint
## Branch merge: numerical-algebraic-solution back to main.
##
## Revision 1.7.2.1  2001/05/04 04:07:24  geraint
## Numerical solution of algebraic equations.
## sys_ae.cc written for unsolved inputs.
## Solution of equations using hybrd from MINPACK (as used by Octave fsolve).

# Find system constants
Nx=`mtt_getsize $sys x` # States
Nxx=`mtt_getsize $sys xx` # States x States
Nu=`mtt_getsize $sys u` # Inputs 
Ny=`mtt_getsize $sys y` # Outputs 
Nyz=`mtt_getsize $sys yz` # Zero outputs
#Npar=`wc -l $sys\_sympar.txt | gawk '{print $1}'`

# Set up representation-specific stuff
case $rep in
    cse)
        matrices='EdX E'
        ns="$Nx $Nx"
        ms="1 $Nx"

# Copyright (c) P.J.Gawthrop 1996

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.2  1998/07/25 10:21:37  peterg
## Entirely rewritten
##
## Revision 1.1  1998/07/25 07:10:41  peterg
## Initial revision
##
###############################################################

#Inform user
echo Creating $1_def.m

% System $1, representation def, language m
% File $1_def.m;
% Generated by MTT on `date`;
%
EOF

# Constants
Nx=`grep "MTTNx " <$1_def.r | gawk '{print $3}' | sed 's/;//'`
Ny=`grep "MTTNy " <$1_def.r | gawk '{print $3}' | sed 's/;//'`
Nu=`grep "MTTNu " <$1_def.r | gawk '{print $3}' | sed 's/;//'`
Nz=`grep "MTTNz " <$1_def.r | gawk '{print $3}' | sed 's/;//'`
Nyz=`grep "MTTNyz " <$1_def.r | gawk '{print $3}' | sed 's/;//'`


cat<<EOF >> $1_def.m 
  nx = $Nx;
  ny = $Ny;
  nu = $Nu;
  nz = $Nz;
  nyz = $Nyz;
EOF

# Copyright (c) P.J.Gawthrop, 1998.

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.2  1998/11/10 17:12:15  peterg
## Removed sorting
##
## Revision 1.1  1998/03/11 10:32:35  peterg
## Initial revision
##
###############################################################


dotdot=$2 # Set to ../ if we are in MTT_work


# Create paths for all valid examples - ie dir name is system name
find $dotdot$1 -name '*_abg.fig' -print |\
  gawk '{
   N=split($1,name,"/"); 
   printf("%s", name[1]);
   for (i=2;i<N;i++) printf("/%s", name[i]); 
   printf(" %s %s\n", name[N-1], name[N]);
  }' |\
  gawk '{
  correctname=sprintf("%s_abg.fig", $2);
  if ($3==correctname) print  $1,$2
  }'

# Copyright (c) P.J.Gawthrop, 1997.

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.3  2000/12/28 12:26:45  peterg
## *** empty log message ***
##
## Revision 1.2  1998/03/11 10:32:11  peterg
## Now uses dir2paths transformation
##
## Revision 1.1  1998/02/05 13:31:25  peterg
## Initial revision
##
###############################################################

dotdot=$2 # Set to ../ if we are in MTT_work

# Inform user
echo "Creating $1_rep.txt (Directory version)"

# Headings
echo "% Verbal description for directory $1 ($1_rep.txt)"> $1_rep.txt
echo "% Generated by MTT on" `date`. >> $1_rep.txt                  	   

# Create paths for all valid examples - ie dir name is system name
dir2paths $1 $2 | sed 's/Introduction/AAAAA/g' | sort | sed 's/AAAAA/Introduction/g' | \
gawk '{
     print "mtt -t -d " $1,$2 " rep tex";
  }' >> $1_rep.txt

# Copyright (c) P.J.Gawthrop, 1996.

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.3  1996/08/11 19:48:29  peter
## Parameter passing added.
##
## Revision 1.2  1996/08/11 10:40:00  peter
## Now handles e and NaN numbers.
##
## Revision 1.1  1996/08/10 14:15:03  peter
## Initial revision
##
###############################################################

echo Creating $1_ir.dat

if [ "$2" = "" ]; 
then
  PARAMS='t=[0:0.1:10]'
  echo Using default parameter $PARAMS
else
  PARAMS=$2;
fi


$MATRIX << EOF | gawk '$1 !~ /[A-MO-Zb-cf-z]/ && NF>0 {print} '  >$1_ir.dat

  $PARAMS;
  [n,m]=size(t);
  if m>n
    t=t';
  end;

#! /bin/sh

     ###################################### 
     ##### Model Transformation Tools #####
     ######################################

# Bourne shell script: examples_txt2tk
# Creates tk/tcl file for xmtt.
# Copyright (c) P.J.Gawthrop, 1998,1999


# Examples menu
gawk 'BEGIN{
    basemenu=".exam.exam"
    oldmenu=basemenu
    OLDPATH="";
    }
    {
    if (NF>1){
    PATH=$1;

## Interface Control Definition for System ${sys}
## ${ICD}: Generated by MTT `date`

EOF

cat ${icd}		|\
    sed 's/[\,\;]/\ /g'	|\
    gawk '
    ($2 != "null" && $6 == "input")  { printf ("Input:  %-30s %-30s Causality: Effort   Units: %s\n", $2, $1, $3) }
    ($4 != "null" && $7 == "input")  { printf ("Input:  %-30s %-30s Causality: Flow     Units: %s\n", $4, $1, $5) }
    ($2 != "null" && $6 == "output") { printf ("Output: %-30s %-30s Causality: Effort   Units: %s\n", $2, $1, $3) }
    ($4 != "null" && $7 == "output") { printf ("Output: %-30s %-30s Causality: Flow     Units: %s\n", $4, $1, $5) }
    ' | sort >> ${ICD}

#! /bin/sh

# Inform user
echo Creating $1_icd.m

#Create the component ICD file complete with headers.
echo "function icd = $1_icd" > $1_icd.m
echo "%% Component icd file ($1_icd.m)" >> $1_icd.m
echo "%% Generated by MTT at `date`" >> $1_icd.m

#Write out the variables 
gawk '{
       if (NF==2) {i++; print "icd."$1 "\t = \""$2"\";"}
     
     }
     END{
       if (i==0) print "icd = 0;"
        }' $1_icd.txt >> $1_icd.m

# Copyright (c) P.J.Gawthrop 1998

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.2  1998/07/02 08:34:00  peterg
## Renamed to lbl2alias_txt2txt
##
## Revision 1.1  1998/07/02 08:14:07  peterg
## Initial revision
##
###############################################################

# Inform user
echo Creating $1_alias.txt

#Create the alias file complete with headers.
echo "# Alias file ($1_alias.txt)" > $1_alias.txt
echo "# Generated by MTT at `date`" >> $1_alias.txt

#Write out the variables 
grep '[%|#]ALIAS' $1_lbl.txt |\
gawk '{print $2,$3}' >> $1_alias.txt

# Copyright (c) P.J.Gawthrop 1998

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.6  1998/07/17 19:46:56  peterg
## No change
##
## Revision 1.5  1998/07/17 16:31:37  peterg
## Ignore component aliases (with /)
##
## Revision 1.4  1998/07/03 15:21:26  peterg
## Replace sub by gsub -- need to replace ALL ,
##
## Revision 1.3  1998/07/03 13:49:03  peterg

#Create the alias file complete with headers.
echo "# Alias file ($1_alias.txt)" > $1_alias.txt
echo "# Generated by MTT at `date`" >> $1_alias.txt

#Write out the variables 
    grep '[%|#]ALIAS' $1_lbl.txt |\
    gawk '{
      if (match($3,"/")==0){
        if (match($2,"\\$")==0){
          alias=$2; name =$3
        }
        else{
          alias=$3; name =$2
        }

#!/bin/sh
# Writes argument list to standard output ready for use in calling lbl file

  ###################################### 
  ##### Model Transformation Tools #####
  ######################################
  
  ###############################################################
  ## Version control history
  ###############################################################
  ## $Id$
  ## $Log$
  ## Revision 1.2  2001/07/03 22:59:08  gawthrop
  ## Fixed problems with argument passing for CRs
  ##
  ## Revision 1.1  2001/06/11 15:06:58  gawthrop
  ## Now handles user-defined components
  ##
  ###############################################################

# Copyright (C) 2001 by Peter J. Gawthrop

if [ -f "$1_lbl.txt" ]; then
grep '[#%]ALIAS' $1_lbl.txt |\

gawk '{
  if (match($2,"\\$[0-9]")==1) ## Test if its a argument alias
  {
    i = substr($2,2);
    arg[i] = $3
    N++
  }
}

# Copyright (c) P.J.Gawthrop 1998

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.3  1998/07/28 11:23:31  peterg
## Put / explicitly in awk.
##
## Revision 1.2  1998/07/27 08:38:11  peterg
## Just look for / in the relevant field.
##
## Revision 1.1  1998/07/17 17:04:50  peterg
## Initial revision
##
###############################################################


# Regexp for an alias
alias='^[#%]ALIAS'

grep $alias $1_lbl.txt | gawk '{if (match($3,"/")>0) print "mtt -q compcopy " $3}'

# Copyright (c) P.J.Gawthrop, 1996.

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.4  2000/12/28 12:32:06  peterg
## Put under RCS
##
# Revision 1.3  1996/11/03  21:11:44  peterg
# Removed END; statement
#
## Revision 1.2  1996/11/02 10:20:53  peterg
## Created from lbl2sympar
##
###############################################################


# Inform user
echo "Creating $1_cr.r"

rm -f mtt_error

#Write some file headers
echo "%% constitutive relationship  file ($1_cr.r)" > $1_cr.r
echo "%% Generated by MTT at `date`" >> $1_cr.r

# This is the main transformation using awk
gawk -f $MTTPATH/trans/awk/lbl2cr.awk <$1_lbl.txt  2>mtt_error.txt | \
	sh >> $1_cr.r

# Now invoke the standard error handling.
#mtt_error mtt_error.txt

#Create the ICD file complete with headers.
echo "# Component ICD file ($1_icd.txt)" > ${icd}
echo "# Generated by MTT at `date`" >> ${icd}

#Write out the variables 
    grep '[%|#]ICD' ${lbl} |\
    gawk '{
      if (match($3,"/")==0){
        if (match($2,"\\$")==0){
          icd=$2; name =$3
        }
        else{
          icd=$3; name =$2
        }

# Copyright (C) 2001 by Peter J. Gawthrop

###############################################################
## Version control history
###############################################################
## $$Id$
## $Log$
## Revision 1.1  2001/03/29 19:24:14  gawthrop
## Can now use c representations of crs when using -c option
##
###############################################################

# Inform user
echo Creating $1_modpar.txt

#Create the modpar file complete with headers.
echo "# Modpar file ($1_modpar.txt)" > $1_modpar.txt
echo "# Generated by MTT at `date`" >> $1_modpar.txt

#Write out the variables 
grep '[%|#]MODPAR' $1_lbl.txt |\
gawk '{printf("%s\t%s\n", $2,$3)}' >> $1_modpar.txt

echo "# End of $1_modpar.txt" >> $1_modpar.txt

# Copyright (c) P.J.Gawthrop, 1996.

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.7  2000/12/28 12:32:06  peterg
## Put under RCS
##
# Revision 1.6  1996/12/07  19:39:51  peterg
# Minor debugging.
#
## Revision 1.5  1996/09/12 17:18:44  peter
## Don't add an RCS header ..
##
## Revision 1.4  1996/08/30 19:01:21  peter

#Write some file headers
echo "%% Symbolic parameter file ($1_sympar.r)" > $1_sympar.r
echo "%% Generated by MTT at `date`" >> $1_sympar.r

# This is the main transformation using awk
tr ';' ',' <  $1_lbl.txt | \
gawk -f $MTTPATH/trans/awk/lbl2sympar.awk | sort >> $1_sympar.r 2>mtt_error.txt

# Now invoke the standard error handling.
mtt_error mtt_error.txt

# Copyright (c) P.J.Gawthrop 1998

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.11  2002/04/19 08:39:45  gawthrop
## Changed \# to # and \% to # to avoid warning in latest gawk version
##
## Revision 1.10  2000/12/28 12:32:06  peterg
## Put under RCS
##
## Revision 1.9  2000/11/16 13:11:06  peterg
## Included PAR and UNITS declarations
##
## Revision 1.8  1999/02/17 21:42:19  peterg

#Create the alias file complete with headers.
echo "% Label summary file ($1_lbl.tex)" > $1_lbl.tex
echo "% Generated by MTT at `date`" >> $1_lbl.tex

#Write out the Description
    grep '[%|#]SUMMARY' $1_lbl.txt | sed 's/_/\\_/g'  |\
    gawk '{
           printf("\\paragraph{System %s:",$2);
           for (i=3;i<=NF;i++) printf("%s ",$i); print ""
           print  "}"
         }' >> $1_lbl.tex
    grep '[%|#]DESCRIPTION' $1_lbl.txt | sed 's/_/\\_/g'  |\
    gawk '{
           for (i=2;i<=NF;i++) printf("%s ",$i); print ""
         }' >> $1_lbl.tex

#Write out the aliases
cat <<EOF >> $1_lbl.tex
\paragraph{Interface information:}
\begin{description}
EOF
    grep '[%|#]ALIAS' $1_lbl.txt | sed 's/_/\\_/g' |\
    gawk '{
      N=split($2,a,"|");
      for (i=1;i<=N;i++){
        if (match(a[i],"\\$")>0){
          printf("\\item [Parameter \\%s] represents actual parameter ",a[i])
        }
        else if (match($3,"/")>0){
          printf("\\item [Component %s]  is in library ",a[i])

#Write out the VARS
cat <<EOF >> $1_lbl.tex
\paragraph{Variable declarations:}
\begin{description}
EOF
    grep '[%|#][V|P]AR' $1_lbl.txt | sed 's/_/\\_/g' |\
    gawk '{
        printf("\\item %s\n",$2)
      }
    END{if (NR==0) print "\\item This component has no PAR declarations"
}'  | sort >> $1_lbl.tex
cat <<EOF >> $1_lbl.tex
\end{description}
EOF


#Write out the UNITS
cat <<EOF >> $1_lbl.tex
\paragraph{Units declarations:}
\begin{description}
EOF
    grep '[%|#]UNITS' $1_lbl.txt | sed 's/_/\\_/g' |\
    gawk '{
        printf("\\item [Port %s] has domain %s\n",$2, $3)
	printf("\\begin{description}\n")
        printf("\\item [Effort units] %s\n",$4)
        printf("\\item [Flow units] %s\n",$5)
	printf("\\end{description}\n")
      }
    END{if (NR==0) print "\\item This component has no UNITs declarations"

# Copyright (c) P.J.Gawthrop, 1996.

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.1  1996/08/14 08:36:16  peter
## Initial revision
##
###############################################################

echo Creating $1.dat

gawk '$1 ~ /[0-9]/ && NF>0 {print} ' <$1.m  >$1.dat

#! /bin/sh

     ###################################### 
     ##### Model Transformation Tools #####
    ######################################

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.69  2002/04/17 13:46:58  geraint
## #include <fstream> for -oct as well as -cc.
##
## Revision 1.68  2002/04/15 10:54:31  geraint
## Statically declare outputs and initialise to zero.
## This is necessary to prevent spurious values from being output when no assignments are made (i.e. when "y(i) := 0 for all u"  (Reduce:see NERO)).
##
## Revision 1.67  2002/04/09 12:04:21  geraint
## Replaced ios:: with std::ios:: for g++-3.0 compatability.
##

EOF
} # make_m

make_cc() 
{
# get octave version
case `$MATRIX --version | gawk -F\. '{print $2}'` in
    0) # stable
	vector_value=vector_value
	feval_header=toplev.h
	save_ascii_data_function=save_ascii_data
	;;
    1) # development
	vector_value=column_vector_value

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.2  2001/05/08 15:18:10  gawthrop
## Added trig and hyperbolic functions to argument exclusion list
##
## Revision 1.1  2000/12/28 09:09:52  peterg
## Initial revision
##
##
###############################################################

#Inform user

## NB the following messes up the expansion switch ????
cat >> $1_subs.r <<EOF
% Ordering switch
ORDER
EOF

# Symbolic params first
gawk '{
  print $1 ","
}' < $1_sympar.txt >> $1_subs.r

# Then states
Nx=`mtt_getsize $1 x` # States

gawk 'END{
  for (k=1;k<Nx;k++){
    printf("mttx%i,\n", k);
  }
    printf("mttx%i;\n", Nx);
  
}' Nx=$Nx < $1_sympar.txt >> $1_subs.r

# Copyright (C) 2001 by Peter J. Gawthrop

###############################################################
## Version control history
###############################################################
## $$Id$
## $Log$
## Revision 1.2  2002/04/16 11:36:03  gawthrop
## These were flagged with M on cvs update
##
## Revision 1.1  2001/04/02 08:19:18  gawthrop
## Translates modulated parameters into reduce
##
###############################################################

# Inform user
echo Creating $1_modpar.r

#Create the modpar file complete with headers.
echo "% Modpar file ($1_modpar.r)" > $1_modpar.r
echo "% Generated by MTT at `date`" >> $1_modpar.r

parameters=`strip_comments < $1_modpar.txt |  cut -f1`
inputs=`strip_comments < $1_modpar.txt |  cut -f2`


for parameter in $parameters; do
    grep $1_${parameter}_ $1_struc.txt |\
    gawk 'BEGIN{
               name["input"] = "u";
               name["output"] = "y";
               name["state"] = "x";
               name["nonstate"] = "z";
	      }
	 {
           printf("%s := mtt%s(%i,1);\n", parameter, name[$1],  $2)
         }' parameter=$parameter >> $1_modpar.r
done

#! /bin/sh

# mtt2reps_txt: Gives a tabular listing of representations and languages
# P J Gawthrop July 1998, October 1998
# Copyright (c) P.J.Gawthrop, 1998

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.12  2001/07/24 04:18:32  gawthrop
## Fixed problem with shell expanding * (used as important rep marker)
##
## Revision 1.11  2001/04/28 03:38:36  geraint
## Refined selection of matching patterns - checks for exact match.
##
## Revision 1.10  2000/09/14 07:54:13  peterg
## Removed -e option in echo
##
## Revision 1.9  2000/04/05 08:34:30  peterg

## Initial revision
##
###############################################################

sep='|'; # Separates the languages from the rest.

## List of all representations (deleting the *)
representations=`grep '#SUMMARY' $MTTPATH/mtt | gawk '{sub("\*","+"); print $2'} | sort -u `


for rep in $representations ; do
    Rep=`echo $rep | tr '+' '*'`
    ## Title should be same for all languages -- but extract the first non-empty version
      title=`grep '#SUMMARY' $MTTPATH/mtt | tr '\t' ' ' | grep "[ *]$Rep[ *]" | \
      gawk  '{if (NF>2) {for (i=3;i<NF-1;i++) printf("%s ",$i); NF1=NF-1; printf("%s\n",$NF1)}}' |\
      head -1`
      
    language=`grep '#SUMMARY' $MTTPATH/mtt |\
      gawk '
        {
          if (index(rep,"*")==length(rep)){
            if ($2==rep) print $NF
          }
          else
            if (($2==rep)||($2==sprintf("%s*",rep))) print $NF
        }' rep=$Rep |\

# Copyright (c) P.J.Gawthrop, 1996

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.8  2000/12/28 12:34:49  peterg
## Put under RCS
##
## Revision 1.7  1998/03/06 17:14:09  peterg
## Cospetic change to message
##
## Revision 1.6  1998/03/05 10:17:41  peterg
## Cosmetic change
##
## Revision 1.5  1998/03/05 10:14:37  peterg

# Initial revision
#
###############################################################

error_file=$1;

# Test for errors and print if any
err_length=`wc -c <$error_file | gawk '{print $1}'`
if [ "$err_length" != "0" ]
then
    echo "INFORMATION: An MTT transformation has generated the following messages"
#  echo "             (which may not be important)"
  cat $error_file
  exit 1
else
  exit 0
fi

		echo "$1 is an invalid argument - ignoring";
                exit ;;
  esac
  shift
done

subsystems=`sh $1_sub.sh "echo grep " " $1_abg.m" |\
            sh | gawk -F '.' '{print $3}'`

if [ -n "$strip" ]; then
      echo $subsystems  
   else
      for subsystem in $subsystems; do
	# echo -n $1_$subsystem' '
        echo $1_$subsystem #| gawk '{printf("%s ",$1)}'
    done
    echo
fi

fi

## The original version for external sizes.
if [ "$2" = "xx" ]; then
  n=`mtt_getsize $1 x`
  N=`echo "$n * $n" | bc` 
else
  N=`grep "MTTN$2 " <$1_def.r | gawk '{print $3}' | sed 's/;//'`
fi

echo $N

# Copyright (C) 2000 by Peter J. Gawthrop

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.41  2002/04/23 17:46:05  gawthrop
## _sim.m now returns time as third argument
##
## Revision 1.40  2002/04/17 16:23:59  geraint
## Partial fix for [ 545113 ] zeros missing in c++.
## Fixes -oct by removing duplicate initialisation (-c is still outstanding).
##
## Revision 1.39  2002/04/15 10:54:31  geraint
## Statically declare outputs and initialise to zero.
## This is necessary to prevent spurious values from being output when no assignments are made (i.e. when "y(i) := 0 for all u"  (Reduce:see NERO)).

if [ -z "$system" ]; then
  echo 'Usage: mtt_header sys rep lang [stdin]'
  exit
fi


# get octave version
octave_development=`octave --version | gawk '{print $4}' | gawk -F\. '{print $2}'`
case `$MATRIX --version | gawk -F\. '{print $2}'` in
    0) # stable
	vector_value=vector_value
	;;
    1) # development
	vector_value=column_vector_value
	;;
    *)

get_sizes()
    {
    Nx=`mtt_getsize $system x` # States
    Nxx=`mtt_getsize $system xx` # States x States
    Nu=`mtt_getsize $system u` # Inputs 
    Ny=`mtt_getsize $system y` # Outputs 
    Nyz=`mtt_getsize $system yz` # Zero outputs
    ##Npar=`wc -l $system\_sympar.txt | gawk '{print $1}'`
    }

zero_matrices()
{
## Set matrices to zero
echo
 ## echo '## Set matrices to zero'

declare_dummies()
{
# Get the dummies
dummies="mtt_tmp"
rm -f mtt_dummies
for dummy in $dummies; do
    grep "${dummy}[0-9]*[ \t\n]*=" < ${fun_name}.m |\
    gawk '{ 
          if (match($1,dummy)==1)
             print $1
         }' dummy=$dummy >> mtt_dummies
done

dummy_list=`sort -u mtt_dummies`

declare_switches ()
{
cat <<EOF

$Lc  Declarations of switches $Rc
EOF
 strip_comments <${system}_switch.txt |\
 gawk '{printf("  double %s_logic = 0;\n", tolower($1))}' 
} # declare_switches

declare_vars()
{
# Grab the names
names=`gawk '{if ($1==var_type) print tolower($4)}' var_type=$1 ${system}_struc.txt`

# Comments
cat <<EOF

$Lc  Declarations for $1 names $Rc
EOF
# Declarations

get_field ()
{ # parse comma separated string
    s=${1:-""}					# comma separated string
    i=${2:-0}					# field number in string

    if [ 0 -eq ${i} ]; then			# return number of fields
	echo ${s} |\
	gawk -F\, '{ print NF }'
    else					# return ith field
	echo ${s} |\
	gawk -F\, -v i=${i} '{ print $i }'
    fi
}


get_extra_fields ()
{ # return list of words in s2 and not in s1
    s1=${1:-""}					# comma separated list

#! /bin/sh

     ###################################### 
     ##### Model Transformation Tools #####
     ######################################

# Bourne shell script: mtt_langname

# Returns the language name from System_rep.lang

# P.J.Gawthrop Feb 2000
# Copyright (C) 2000 by Peter J. Gawthrop

echo $1 | gawk -F '.' '{print $2}'

# Copyright (c) P.J.Gawthrop 1998

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.67  2002/04/18 17:02:15  gawthrop
## foo=zeros(3,1) translated as zero_state(foo,3)
##
## Revision 1.66  2001/03/30 15:13:58  gawthrop
## Rationalised simulation modes to each return mtt_data
##
## Revision 1.65  2001/02/09 02:56:46  geraint
## Translate some binary operators
## Allows use of ! in logic.txt
##

##
###############################################################



# Set up variables
args=`echo $1 | sed 's/_/ /' | sed 's/\./ /'`
Sys=`echo $args  | gawk '{print $1}'`
sys=`echo $Sys  | gawk '{print tolower($1)}'`
rep=`echo $args  | gawk '{print $2}'`
Sys_rep="$Sys""_""$rep"
Sys_smx="$Sys""_smx"
Sys_smxp="$Sys""_smx.p"
Filename="$Sys""_""$rep.p"
filename="$sys""_""$rep.p"

Method=$2; # The integration method

  echo Creating $Filename $MethodBlurb $StdinBlurb 

# Find system constants
Nx=`mtt_getsize $Sys x` # States
Nxx=`mtt_getsize $Sys xx` # States x States
Nu=`mtt_getsize $Sys u` # Inputs 
Ny=`mtt_getsize $Sys y` # Inputs 
Npar=`wc -l $Sys\_sympar.txt | gawk '{print $1}'`


#if [ "$rep" = "simpar" ]; then
#    mtt -q $Sys smx p
#fi

# Heading

	echo "    AA,mtte                     : StateMatrix;"
	echo "    MTTi,MTTj,it,iLast: INTEGER;"
	##echo "    mttSTEPFACTOR,mttWSTEPS,mttSTEPS,mttINPUT : INTEGER;"
	## echo "    mttMETHOD : IntegrationMethod;"
	echo "    open_switches  : StateVector;"
	echo "    numparfile, statefile, simparfile  : TEXT;"
        strip_comments <${Sys}_switch.txt |\
          gawk '{printf("%s_logic : REAL;\n", tolower($1))}' 
	echo ""
        mtt_txt2declare $Sys sympar p
        mtt_txt2declare $Sys struc p
        ;;
#    switchopen)
#	echo "PROCEDURE $Sys_rep(VAR open : StateVector; mttx : StateVector);"
#	echo "VAR"

cat $Sys_rep.m |\
grep -v 'Remove in mtt_m2p'  |\
grep -v '^[ ]*function'  |\
grep -v '^[ ]*endfunction'  |\
grep -v 'MTT_data'  |\
sed "s/^$space%/#/" | sed "s/\([;)]$space\)%/\1#/" |\
gawk -F# '{printf("%s",$1) 
          if (NF>1) printf("{* %s *}", $2)
          printf("\n") 
         }' |\
sed "s/$space\[\($non_space\)\]$spaces=$spaces\($fun_name\)(\($args\))/\2(\1,\3)/" |\
sed "s/$space\[\($non_space\)\]$spaces=$spaces\($mttfun_name\)(\($args\))/\2(\1,\3)/" |\
sed "s/$space\[\($non_space\)\]$spaces=$spaces\($mttfun_name\)/\2(\1)/" |\
sed "s/$space\($non_space\)$spaces=${spaces}zeros(\([0-9]*\),1)/zero_state(\1,\2)/" |\
sed "s/$space\($non_space\)$spaces=$spaces\($fun_name\)(\($args\))/\2(\1,\3)/" |\
sed "s/,)/)/" |\
fix_operators |\
gawk '
function printvar(Name,N) {
  if (N<1) return;
  width = 10;
  kk = 0; 
  for (k=1;k<=N;k++) {
    printf("mtt%s%i", Name, k);
    if (k==N)

EOF

for sys in $systems; do
    echo .sys.sys add radio -label "$sys"  -command {set system "$sys"} 
done

# Create the options menu
mtt |  gawk '{
  if (Options) {
    option=substr($1,2);
    label="";
    for (i=2;i<=NF;i++)
      label = sprintf("%s %s",label,$i);
    printf(".opt.opt add check -label \"%s (-%s)\" -variable %s -command {set args \"$args -%s\" }\n", label, option, option, option); 
  }

# Copyright (C) 2000 by Peter J. Gawthrop

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.7  2000/05/19 17:47:35  peterg
## Fixed bug in oct version but still needs proper check
##
## Revision 1.6  2000/05/17 17:20:49  peterg
## Fixed bugs with ny>1. Could be made faster by not generating y when
## y_sim >1
##
## Revision 1.5  2000/05/17 16:01:42  peterg
## Fixed bug for n_y>1
##

    odeo=odeo
fi

# Find system constants
Nx=`mtt_getsize $Sys x` # States
Nu=`mtt_getsize $Sys u` # Inputs 
Ny=`mtt_getsize $Sys y` # Inputs 
Npar=`wc -l $Sys\_sympar.txt | gawk '{print $1}'`

# Header
lang_header -noglobals $1 sim m 'x0,u,t,par,sensitivities' '[y,ys]' > $1_sim.m

cat >> $1_sim.m <<EOF
##  tick=time; 
  if nargin<5

# Copyright (C) 2000 by Peter J. Gawthrop

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.10  2001/07/28 21:10:18  geraint
## Generate warning instead of error if reserved word used.
##
## Revision 1.9  2001/07/23 05:16:39  geraint
## Simple filter for Reduce reserved words in sympar.
##
## Revision 1.8  2001/07/04 06:00:12  gawthrop
## Fixed a funny with tr - changed SEPS and REPS - something to do with ^
##
## Revision 1.7  2001/04/13 07:14:12  geraint

sys=$1 # System name
filename=$1_sympar.txt
# Inform user
echo Creating $filename

# Create list of all sympars including those that are aliased
sh $1_type.sh 'echo ' ' ' ' ' |\
gawk '{printf("abg2sympar_m2txt %s %s\n ", $1, $2)}' |\
sh | sort -u > mtt_all_sympar.txt

# Sort the aliased list
mtt_strip_args < $1_aliased.txt | sort -u  > mtt_aliased_sort.txt

# Create list of unwanted stuff
cat  mtt_aliased_sort.txt> mtt_unwanted.txt

notvar="[%|#]NOT[V|P]AR";
sh $1_type.sh 'strip_notvars.sh ' ' ' ' mtt_unwanted.txt'

sort -u mtt_unwanted.txt > mtt_unwanted_sort.txt

# Compare it with the aliased list and show the differences
diff mtt_all_sympar.txt mtt_unwanted_sort.txt |\
gawk '{if ($1=="<") printf("%s\t%s\n", $2,$3)}' > mtt_sympar.txt

# Assume same name in different system is the same
gawk '{
    if ($1==name){
	sysname[i++]=$2
    }
    
    if ($1!=name){
        if (length(name)>0){
          printf("%s\t",name)

        }
        printf("\n")

}' < mtt_sympar.txt >$filename

reserved_words=`\
    cat ${MTT_LIB}/reduce/reserved_words.txt	|\
    gawk '{printf "%s ", $0}'			|\
    tr [a-z] [A-Z]`
sympar_words=`\
    cat ${filename}				|\
    cut -f1					|\
    gawk '{printf "%s ", $0}'			|\
    tr [a-z] [A-Z]`
flag=0
for reserved_word in ${reserved_words}; do
    for sympar_word in ${sympar_words}; do
	if [ ${sympar_word} = ${reserved_word} ]; then
	    echo ""
	    echo "*** MTT Warning:"
	    echo "    ${sympar_word} is reserved (Reduce)"
	    echo ""
	fi
    done
done

#!/bin/sh

# Copyright (C) 2000 by Peter J. Gawthrop

# Fixes broken lines from reduce.

#sed 's/[^#]\(.*\)[^;]$/\1\\/' 

gawk '{
  if ((match($1,"#")==0)&&(match($1,"global")==0)&&(match($1,"endfunction")==0)) {
    if(match($0,";")!=length($0))
      printf("%s \\\n",$0)
    else
      print $0
  }
  else print $0

#!/bin/sh

# Does mutiple commands down the hierarchy

command=$1
system=$2
rep=$3
lang=$4
relative_level=$5

current_level=`echo $system | gawk '{N=split($1,foo,"_"); print N-1}'`

if [ -z "$relative_level" ]; then
  relative_level=0;    
fi

mtt_xargs.sh "ls" "$2*_$3.$4"  |\
gawk '{
  level=split($1,foo,"_")-2;
  maxlevel = current_level +  relative_level;
  if (level<=maxlevel) print command, $0, "&";
'} command=$command relative_level=$relative_level current_level=$current_level

case $2 in
    numpar)
        name=mttpar
	cat $1_sympar.txt>mtt_infile
	;;
    state)
        name=mttx
	gawk '{if ($1==rep) printf("%s\n", $4)}' rep=$2 \
        <$1_struc.txt >mtt_infile
	;;
    input)
        name=mttu
	gawk '{if ($1==rep) printf("%s\n", $4)}' rep=$2 \
        <$1_struc.txt >mtt_infile
	;;
    *)
	echo Repesentation $2 not supported
esac

case $3 in
    zero)
	  strip_comments <mtt_infile | grep "$filter"  |\
          gawk '{
          i++; printf("  %s = 0.0;\n", tolower($1));
          }'
	;;
    set)
	  strip_comments <mtt_infile  |\
         gawk '{
           i++; printf("  %s(%i)\t= %s;\n", name, i, tolower($1));
         }' name=$name
        ;;
    *)
         strip_comments <mtt_infile  |\
         gawk '{
           i++; printf("  %s \t= %s(%i);\n", tolower($1), name, i);
         }' name=$name
	;;
esac

# Find system constants
Nx=`mtt_getsize $1 x`
Nxx=`mtt_getsize $1 xx`
Nu=`mtt_getsize $1 u`
Ny=`mtt_getsize $1 y`

Npar=`wc -l $1_sympar.txt | gawk '{print $1}'`


echo "PROCEDURE $1_$2;" > $1_$2.pas
echo "TYPE"             >>$1_$2.pas
echo "    StateVector  = ARRAY[1..$Nx] OF REAL;"        >>$1_$2.pas
echo "    StateMatrix  = ARRAY[1..$Nx,1..$Nx] OF REAL;" >>$1_$2.pas
echo "    StateMatrixVector  = ARRAY[1..$Nxx] OF REAL;" >>$1_$2.pas
echo "    InputVector  = ARRAY[1..$Nu] OF REAL;"        >>$1_$2.pas
echo "    OutputVector  = ARRAY[1..$Ny] OF REAL;"       >>$1_$2.pas
echo "    ParameterVector  = ARRAY[1..$Npar] OF REAL;"  >>$1_$2.pas


# Create the predefined vars
echo "VAR"     >>$1_$2.pas
gawk '{
       printf("%s,", $1)
     }
     END{print "JUNK : REAL;"}'< $1_sympar.txt     >>$1_$2.pas

if [ "$2" = "ode2odes" ]; then
    first='PROCEDURE'
    gawk '
    {
    if (writing) print $0;
    if (i++==0) writing=1
    if (match($1,"PROCEDURE")==1) writing=0;
    }'  < $1_$2.p >>$1_$2.pas
else
    first='BEGIN'

 # Convert VAR format in the headings
    gawk 'BEGIN{writing=1}
    {
    if (match($1,"BEGIN")==1) writing=0;
    if (writing) print $0;
    }'  < $1_$2.p | \
    sed \
	-e 's/PROCEDURE [a-zA-Z_0-9]*(VAR/VAR/' \
	-e 's/PROCEDURE [a-zA-Z_0-9]*;//' \
	-e 's/REAL);/REAL;/' \
	-e 's/OutputVector);/OutputVector;/' \
	-e 's/ParameterVector);/ParameterVector;/' \
	>>$1_$2.pas
fi

# Write out the actual code until the begining of the procedure
gawk 'BEGIN{writing=0}
{
  if (match($1,first)==1) writing=1;
  if (writing) print $0;
  if (match($1,begin)==1) writing=0;

}' begin=$begin first=$first   < $1_$2.p  >>$1_$2.pas

# Write out the parameters
echo {Parameters}   >>$1_$2.pas
gawk '{
       printf("  %s \t:= mttpar[%i];\n", $1, ++i);
     }'< $1_sympar.txt  >>$1_$2.pas

# Write out the actual code from the end of the procedure
gawk 'BEGIN{writing=0}
{
  if (writing) print $0;
  if (match($1,begin)==1) writing=1;
}' begin=$begin   < $1_$2.p  >>$1_$2.pas

#echo "Creating $1_$2.C"
p2c -o $1_$2.C $1_$2.pas > mtt_p2C.log 2>> mtt_p2C.log

#Extract Type info
echo '/* Types */'                >> $sys_rep.cc
grep typedef $sys_rep.C              >> $sys_rep.cc

#Extract the rep code converting [] to () and deleting mtt variables etc
#The awk part detects the begin and end of the relevant code.
echo "/* Representation $rep information */" >> $sys_rep.cc
gawk '{
  if ( (match($1,"}")==1)&&(NF>1)) writing=0;
  if ( (writing) && !(match($2,"mtt[a-z]")==1) ) print $0;
  if (match($1,"{")==1) writing=1;
}' <$sys_rep.C |\
sed 's/\[\([a-z0-9_]*\)\]\[\([a-z0-9_]*\)\]/(\1,\2)/g' |\
sed 's/\[\([a-z_0-9]*\)\]/(\1)/g' >> $sys_rep.cc

#! /bin/sh
## Chages the Pascal output from gentran to octave form
# Copyright (C) 2000 by Peter J. Gawthrop

sed 's/begin$//' |\
sed 's/end$//' |\
sed 's/end;$/;/' |\
sed 's/\[\([0-9,]*\)\]/(\1)/g' |\
sed 's/:=/ = /' |\
sed 's/\*\*/\^/g' |\
sed 's/mtt\([a-z]\)\([a-z]*\)\([0-9]\)\([0-9]*\)/mtt\1\2(\3\4)/g' |\
gawk '{
  sub(/^[\ ]*/, "", $0)
  sub(/\$$/, ";", $0)
  
  if (match($NF,"[;#.%]$")==0){
    Previous[++i] = $0
  }
  else {

#!/bin/sh
# pinclude - explicitly includes Pascal files - p2c has probs. doing this

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.1  2000/12/28 11:56:46  peterg
## Put under RCS
##
###############################################################



gawk ' {
  if ( (match($1,"{\\$I")>0) || (match($1,"\\*\\$I")>0) ) {
    sub(/}/,"",$2); 
    command=sprintf("mtt_pinclude %s",$2); 
    system(command)
  }
  else{
  print $0

#! /bin/sh

     ###################################### 
     ##### Model Transformation Tools #####
     ######################################

# Bourne shell script: mtt_repname

# Returns the representation name from System_rep.lang

# P.J.Gawthrop Feb 2000
# Copyright (C) 2000 by Peter J. Gawthrop

echo $1 | tr '.' '_' | gawk -F '_' '{print $2}'

#! /bin/sh

     ###################################### 
     ##### Model Transformation Tools #####
     ######################################

# Bourne shell script: strip args
# Strips unwanted bits from a list of arguments
# Label file to symbolic parameters conversion
# Copyright (C) 2000 by Peter J. Gawthrop

## $Id$  ##
## $Log$
## Revision 1.6  2001/07/04 06:00:12  gawthrop
## Fixed a funny with tr - changed SEPS and REPS - something to do with ^
##
## Revision 1.5  2001/06/13 14:50:13  gawthrop
## Operator ^ now ok in args in abg and/or lbl
##
## Revision 1.4  2001/05/08 15:18:10  gawthrop
## Added trig and hyperbolic functions to argument exclusion list
##
## Revision 1.3  2000/10/17 12:33:13  peterg

SEPS='^=*;+/()-'
# Replace by ,
REPS='[,*]'


# This is the main transformation using gawk
tr $SEPS $REPS | \
gawk '
function exact_match(name1, name2) {
  return ((match(name1,name2)>0)&&(length(name1)==length(name2)))
}

function matches(names, name) {
  n_matches = split(names,match_name);
  matched = 0;

#! /bin/sh

     ###################################### 
     ##### Model Transformation Tools #####
     ######################################

# Bourne shell script: mtt_sysname

# Returns the system name from System_rep.lang

# P.J.Gawthrop Feb 2000
# Copyright (C) 2000 by Peter J. Gawthrop

echo $1 | gawk -F '_' '{print $1}'

# Copyright (C) 2000 by Peter J. Gawthrop

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.2  2000/10/14 09:32:50  peterg
## struc version only does state and input
##
## Revision 1.1  2000/10/14 09:26:48  peterg
## Initial revision
##
## Revision 1.1  2000/10/11 09:08:20  peterg
## Initial revision
##

	;;
    *)
	echo Language $language not supported - sorry; exit 1
esac

case $what in
    struc)
	strip_comments < $sys"_"$what".txt" | gawk '{if (($1=="state")||($1=="input"))
                                                      print $4;
                                                   }' >mtt_names
	;;
    sympar)
      	strip_comments < $sys"_"$what".txt" | gawk '{print $1}' >mtt_names
	;;
    *)
	echo Argument 2 must be struc or sympar
esac

# Start
cat<<EOF
$first
EOF
#Write out the variables 
gawk '{
  i++; 
  var[i] = tolower($1);
}
END{
  n = i;
  for (i=1; i<n; i++){
    printf("%s%s",var[i], delim);

# %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
# %% Version control history
# %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
# %% $Id$
# %% $Log$
# %% Revision 1.16  2002/04/18 17:51:11  gawthrop
# %% Put default values in _simpar.m in case of missing values in txt file
# %%
# %% Revision 1.15  2002/03/26 12:00:37  geraint
# %% Escaped characters to eliminate awk warnings.
# %%
# %% Revision 1.14  2001/07/13 04:54:04  geraint
# %% Branch merge: numerical-algebraic-solution back to main.
# %%
# %% Revision 1.13.4.2  2001/07/09 00:24:58  geraint

EOF
fi

# Write out the code from the txt file
echo >> $outfile
echo "## User defined code from $1_$2.txt" >> $outfile
cat  $1_$2.txt | strip_comments | grep -v METHOD |\
gawk -F#  'BEGIN{
quote = "\047";
doublequote = "\042";
}
{
  N=split($1,a,"=");
  if (N==2) {
    LHS = a[1];

# Copyright (C) 2000 by Peter J. Gawthrop

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.16  2000/10/17 13:45:18  peterg
## split up state and input - different defaults
##
## Revision 1.15  2000/10/17 09:53:05  peterg
## More on logic rep
##
## Revision 1.14  2000/10/17 08:36:56  peterg
## Included logic rep.
##
## Revision 1.13  2000/10/15 09:27:13  peterg

	    default='1.0'
	;;
    input)
	    lang=txt
	    textfile=$1_$2.$lang
	    infofile=mtt_list.$lang
	    moreinfofile=mtt_list_numpar.$lang
            gawk '{if ($1==rep) printf("%s\n", $4)}' rep=$2 \
            <$1_struc.txt >$infofile
	    cat $infofile $1_sympar.$lang> $moreinfofile  
	    default='1.0'
         ;;
    state)
	    lang=txt
	    textfile=$1_$2.$lang
	    infofile=mtt_list.$lang
	    moreinfofile=mtt_list_numpar.$lang
            gawk '{if ($1==rep) printf("%s\n", $4)}' rep=$2 \
            <$1_struc.txt >$infofile
	    cat $infofile $1_sympar.$lang> $moreinfofile  
	    default='0.0'
         ;;
    logic) 
	    lang=txt
	    textfile=$1_$2.$lang
	    infofile=mtt_list.$lang
	    moreinfofile=mtt_list_numpar.$lang
            gawk '{if ($3=="MTT_SWITCH") printf("%s_logic\n", $4)}' rep=$2 \
            <$1_struc.txt >$infofile
	    cat $infofile $1_sympar.$lang> $moreinfofile  
	    default='1.0'
	;;
    *)
	    echo Representation $rep not implemented
	    exit
esac

# Create a string containing the variables
if [ -f "$textfile" ]; then
  # Inform User
  echo Checking $textfile
else
  echo Creating $textfile
  mtt_header $sys $rep $lang > $textfile 
  info=`cut -f1 $infofile | sort`
  for new in $info; do
    echo $new $default  |\
    gawk '{printf("%s\t= %s; # Default\n",$1,$2)}' >> $textfile
  done
  exit    
fi

# Remove tmp files
rm -f mtt_in_text mtt_in_info

# Strip files
strip_comments <$textfile | tr 'A-Z' 'a-z' >mtt_text
strip_comments <$infofile | tr 'A-Z' 'a-z' >mtt_info
strip_comments <$moreinfofile  | tr 'A-Z' 'a-z' >mtt_moreinfo

# Use awk to check file
gawk '{
  if (FILENAME=="mtt_text") {
    gsub("[\t ]" ,""); # Remove whitespace
    split($0,a,"=");
    text[a[1]] = a[2];
  }
  if (FILENAME=="mtt_info"){
     info[$1] = default;

  }
  }'  default=$default mtt_text mtt_info mtt_moreinfo


if [ -z "$update" ]; then
  if [ -f "mtt_in_text" ]; then
    echo "The following variables are defined in $textfile, but do not exist:"
    sort mtt_in_text | gawk '{printf("\t%s\n",$1)}'
    echo Use mtt $sys $rep $lang to update
  fi
  if [ -f "mtt_in_info" ]; then
    echo "The following variables exist, but are not defined in $textfile:"
    sort mtt_in_info | gawk '{printf("\t%s\n",$1)}'
    echo Use mtt $sys $rep $lang to update
  fi
  exit    
fi
answered=''
if [ -f "mtt_in_text" ]; then
  in_text=`sort mtt_in_text`
  echo "The following variables are defined in $textfile, but do not exist:"
  sort mtt_in_text | gawk '{printf("\t%s\n",$1)}'


  while [ -z "$answered" ]; do
    echo "Update $textfile (y/n)?"
    read answer < /dev/tty
    case $answer in
	y)

    esac
  done      
fi

answered=''
if [ -f "mtt_in_info" ]; then
  echo "The following variables exist, but are not defined in $textfile:"
  sort mtt_in_info | gawk '{printf("\t%s\n",$1)}'

  while [ -z "$answered" ]; do
    echo "Update $textfile (y/n)?"
    read answer < /dev/tty
    case $answer in
	y)
	    answered=yes
            in_info=`sort mtt_in_info`
 	    for new in $in_info; do
                echo Adding $new
                echo $new $default  |\
                gawk '{printf("%s\t= %s; # Added by MTT on %s\n",$1,$2,strftime())}'\
                >> $textfile
                changed=yes
	    done
	    ;;
	n)
	    answered=yes
	    ;;
	*)
    esac
  done      
fi

# Copyright (c) P.J.Gawthrop, 1997.

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.5  2000/11/27 18:06:33  peterg
## *** empty log message ***
##
## Revision 1.4  1997/12/04 22:10:18  peterg
## Handles argument list - variable names.
##
## Revision 1.3  1997/05/22 09:42:48  peterg
## Returns 0 if no names.
##
## Revision 1.2  1997/05/22 09:28:22  peterg
## Removed trailing , in output.
##
## Revision 1.1  1997/05/22 08:48:21  peterg
## Initial revision
##
###############################################################

gawk '
{
  name_index[$4]=$2;
}
END{
  M=split(names,xynames,":");
  if (M==0)
    printf("0\n")

# Copyright (c) P.J.Gawthrop, 1997.

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.6  2000/12/28 12:52:13  peterg
## *** empty log message ***
##
## Revision 1.5  1997/06/13 09:42:25  peterg
## Auto change of () to []
##
# Revision 1.4  1997/05/15  08:33:07  peterg
# Declare state array (x).
#
# Revision 1.3  1997/05/03  15:01:42  peterg

echo "extern double x[MTTNX1];"  >> $1_numpar.c
echo "#include \"$1_sympar.c\""  >> $1_numpar.c
echo "$1_numpar()" >> $1_numpar.c
echo '{' >> $1_numpar.c

#Write out the variables in c format.
sed 's/#C-CODE //'< $1_numpar.txt |\
gawk -F#  '{
  if (NF<2) print $1
  if (NF>1)  print $1 "/* " $2 " */"
}' | sed 's/(\([0-9]*\))/[\1]/'  >> $1_numpar.c

echo '}'  >> $1_numpar.c

# Copyright (c) P.J.Gawthrop 1996

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.4  2000/12/28 12:52:22  peterg
## *** empty log message ***
##
## Revision 1.3  1998/07/25 18:26:33  peterg
## *** empty log message ***
##
# Revision 1.2  1997/05/01  08:24:38  peterg
# Now uses # as the comment symbol in the .txt file
#
# Revision 1.1  1997/05/01  07:45:17  peterg

# Global variable list
#echo  >>  $1_numpar.m
#echo "# Global variable list" >>  $1_numpar.m
#sympar2global_txt2m $1 >> $1_numpar.m

#Write out the variables in m format.
gawk -F#  '{
  if (NF==1) print $1
  if (NF==2)  print $1 "# " $2
}' $1_numpar.txt |\
sed 's/double/global/' >> $1_numpar.m

# Remove the old log file
rm -f obs_r2m.log
rm -f $1_obs.m?
rm -f $1_obsa.m

# Is the system affine (look in the _obs.r file
affine=`grep 'affine :=' $1_obs.r | gawk '{print $3}' | sed 's/;//'`


# Use reduce to accomplish the transformation
$SYMBOLIC >obs_r2m.log << EOF

%Read the reduce definitions file
in "$1_def.r";