'\"
'\" Copyright (c) 2008 Donal K. Fellows
'\" Copyright (c) 2008-2012 Donal K. Fellows
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\" 
.so man.macros
.TH zlib n 8.6 Tcl "Tcl Built-In Commands"
.BS

Passes a description of the gzip header to create, in the same format that
\fBzlib gzip\fR understands.
.TP
\fB\-level\fI compressionLevel\fR
.
How hard to compress the data. Must be an integer from 0 (uncompressed) to 9
(maximally compressed).
'\".TP
'\"\fB\-limit\fI readaheadLimit\fR
.TP
\fB\-limit\fI readaheadLimit\fR
'\".
'\"The maximum number of bytes ahead to read.
'\"\fITODO: not yet implemented!\fR
.
The maximum number of bytes ahead to read when decompressing. This defaults to
1, which ensures that data is always decompressed correctly, but may be
increased to improve performance. This is more useful when the channel is
non-blocking.
.PP
Both compressing and decompressing channel transformations add extra
configuration options that may be accessed through \fBchan configure\fR. Each
option is either a read-only or a write-only option. The options are:
configuration options that may be accessed through \fBchan configure\fR. The
options are:
.TP
\fB\-checksum\fI checksum\fR
.
This read-only option gets the current checksum for the uncompressed data that
the compression engine has seen so far. It is valid for both compressing and
decompressing transforms, but not for the raw inflate and deflate formats. The
compression algorithm depends on what format is being produced or consumed.
.TP
\fB\-flush\fI type\fR
.
This write-only operation flushes the current state of the compressor to the
underlying channel. It is only valid for compressing transformations. The
\fItype\fR must be either \fBsync\fR or \fBfull\fR for a normal flush or an
expensive flush respectively. Flushing degrades the compression ratio, but
makes it easier for a decompressor to recover more of the file in the case of
data corruption.
.TP
\fB\-checksum\fR
.
This read-only option gets the current checksum for the uncompressed data
that the compression engine has seen so far. It is valid for both
compressing and decompressing transforms, but not for the raw inflate
and deflate formats. The compression algorithm depends on what
format is being produced or consumed.
.TP
\fB\-header\fR
\fB\-header\fI dictionary\fR
.
This read-only option, only valid for decompressing transforms that are
processing gzip-format data, returns the dictionary describing the header read
off the data stream.
.TP
\fB\-limit\fI readaheadLimit\fR
.
This read-write option is used by decompressing channels to control the
maximum number of bytes ahead to read from the underlying data source. This
defaults to 1, which ensures that data is always decompressed correctly, but
may be increased to improve performance. This is more useful when the channel
is non-blocking.
.RE
.SS "STREAMING SUBCOMMAND"
.TP
\fBzlib stream\fI mode\fR ?\fIlevel\fR?
.
Creates a streaming compression or decompression command based on the
\fImode\fR, and return the name of the command. For a description of how that
command works, see \fBSTREAMING INSTANCE COMMAND\fR below. The following modes
are supported:
.RS
.TP
\fBzlib stream compress\fR ?\fIlevel\fR?
\fBzlib stream compress\fR ?\fB\-dictionary \fIbindata\fR? ?\fB\-level \fIlevel\fR?
.
The stream will be a compressing stream that produces zlib-format output,
using compression level \fIlevel\fR (if specified) which will be an integer
from 0 to 9.
from 0 to 9,
.VS
and the compression dictionary \fIbindata\fR (if specified).
.VE
.TP
\fBzlib stream decompress\fR
\fBzlib stream decompress\fR ?\fB\-dictionary \fIbindata\fR?
.
The stream will be a decompressing stream that takes zlib-format input and
produces uncompressed output.
.VS
If \fIbindata\fR is supplied, it is a compression dictionary to use if
required.
.VE
.TP
\fBzlib stream deflate\fR ?\fIlevel\fR?
\fBzlib stream deflate\fR ?\fB\-dictionary \fIbindata\fR? ?\fB\-level \fIlevel\fR?
.
The stream will be a compressing stream that produces raw output, using
compression level \fIlevel\fR (if specified) which will be an integer from 0
to 9.
to 9,
.VS
and the compression dictionary \fIbindata\fR (if specified). Note that
the raw compressed data includes no metadata about what compression
dictionary was used, if any; that is a feature of the zlib-format data.
.VE
.TP
\fBzlib stream gunzip\fR
\fBzlib stream gunzip\fR ?\fIlevel\fR?
.
The stream will be a decompressing stream that takes gzip-format input and
produces uncompressed output.
.TP
\fBzlib stream gzip\fR ?\fIlevel\fR?
\fBzlib stream gzip\fR ?\fB\-header \fIheader\fR? ?\fB\-level \fIlevel\fR?
.
The stream will be a compressing stream that produces gzip-format output,
using compression level \fIlevel\fR (if specified) which will be an integer
from 0 to 9.
'\" TODO: Header dictionary!
from 0 to 9, and the header descriptor dictionary \fIheader\fR (if specified;
for keys see \fBzlib gzip\fR).
.TP
\fBzlib stream inflate\fR
\fBzlib stream inflate\fR ?\fB\-dictionary \fIbindata\fR?
.
The stream will be a decompressing stream that takes raw compressed input and
produces uncompressed output.
produces uncompressed output. If \fIbindata\fR is supplied, it is a
compression dictionary to use. Note that there are no checks in place
to determine whether the compression dictionary is correct.
.RE
.SS "CHECKSUMMING SUBCOMMANDS"
.TP
\fBzlib adler32\fI string\fR ?\fIinitValue\fR?
.
Compute a checksum of binary string \fIstring\fR using the Adler-32 algorithm.
If given, \fIinitValue\fR is used to initialize the checksum engine.

command. They are used by calling their \fBput\fR subcommand one or more times
to load data in, and their \fBget\fR subcommand one or more times to extract
the transformed data.
.PP
The full set of subcommands supported by a streaming instance command,
\fIstream\fR, is as follows:
.TP
\fIstream \fBadd\fR ?\fIoption\fR? \fIdata\fR
\fIstream \fBadd\fR ?\fIoption...\fR? \fIdata\fR
.
A short-cut for
.QW "\fIstream \fBput \fIoption data\fR"
.QW "\fIstream \fBput \fR?\fIoption...\fR? \fIdata\fR"
followed by
.QW "\fIstream \fBget\fR" .
.TP
\fIstream \fBchecksum\fR
.
Returns the checksum of the uncompressed data seen so far by this stream.
.TP

.QW "\fIstream \fBput \-fullflush {}\fR" .
.TP
\fIstream \fBget \fR?\fIcount\fR?
.
Return up to \fIcount\fR bytes from \fIstream\fR's internal buffers with the
transformation applied. If \fIcount\fR is omitted, the entire contents of the
buffers are returned.
.
\fIstream \fBheader\fR
.
Return the gzip header description dictionary extracted from the stream. Only
supported for streams created with their \fImode\fR parameter set to
\fBgunzip\fR.
.TP
\fIstream \fBput\fR ?\fIoption\fR? \fIdata\fR
\fIstream \fBput\fR ?\fIoption...\fR? \fIdata\fR
.
Append the contents of the binary string \fIdata\fR to \fIstream\fR's internal
buffers while applying the transformation. If present, \fIoption\fR must be
one of the following (or an unambiguous prefix) which are used to modify the
buffers while applying the transformation. The following \fIoption\fRs are
supported (or an unambiguous prefix of them), which are used to modify the
way in which the transformation is applied:
.RS
.TP
\fB\-dictionary\fI compressionDictionary\fR
.VS "TIP 400"
Sets a compression dictionary to use when working with compressing or
decompressing the data.
.VE
.TP
\fB\-finalize\fR
.
Mark the stream as finished, ensuring that all bytes have been wholly
compressed or decompressed. For gzip streams, this also ensures that the
footer is written to the stream. The stream will need to be reset before
having more data written to it after this, though data can still be read out
of the stream with the \fBget\fR subcommand.
.RS
.PP
This option is mutually exclusive with the \fB\-flush\fR and \fB\-fullflush\fR
options.
.RE
.TP
\fB\-flush\fR
.
Ensure that a decompressor consuming the bytes that the current (compressing)
stream is producing will be able to produce all the bytes that have been
compressed so far, at some performance penalty.
.RS
.PP
This option is mutually exclusive with the \fB\-finalize\fR and
\fB\-fullflush\fR options.
.RE
.TP
\fB\-fullflush\fR
.
Ensure that not only can a decompressor handle all the bytes produced so far
(as with \fB\-flush\fR above) but also that it can restart from this point if
it detects that the stream is partially corrupt. This incurs a substantial
performance penalty.
.RS
.PP
This option is mutually exclusive with the \fB\-finalize\fR and \fB\-flush\fR
options.
.RE
.RE
.TP
\fIstream \fBreset\fR
.
Puts any stream, including those that have been finalized or that have reached
eof, back into a state where it can process more data. Throws away all
internally buffered data.

declare 628 {
    void *Tcl_FindSymbol(Tcl_Interp *interp, Tcl_LoadHandle handle,
			 const char *symbol)
}
declare 629 {
    int Tcl_FSUnloadFile(Tcl_Interp *interp, Tcl_LoadHandle handlePtr)
}

# TIP #400
declare 630 {
    void Tcl_ZlibStreamSetCompressionDictionary(Tcl_ZlibStream zhandle,
	    Tcl_Obj *compressionDictionaryObj)
}

# ----- BASELINE -- FOR -- 8.6.0 ----- #

##############################################################################

# Define the platform specific public Tcl interface. These functions are only
# available on the designated platform.

				void *procPtrs, Tcl_LoadHandle *handlePtr);
/* 628 */
EXTERN void *		Tcl_FindSymbol(Tcl_Interp *interp,
				Tcl_LoadHandle handle, const char *symbol);
/* 629 */
EXTERN int		Tcl_FSUnloadFile(Tcl_Interp *interp,
				Tcl_LoadHandle handlePtr);
/* 630 */
EXTERN void		Tcl_ZlibStreamSetCompressionDictionary(
				Tcl_ZlibStream zhandle,
				Tcl_Obj *compressionDictionaryObj);

typedef struct TclStubHooks {
    const struct TclPlatStubs *tclPlatStubs;
    const struct TclIntStubs *tclIntStubs;
    const struct TclIntPlatStubs *tclIntPlatStubs;
} TclStubHooks;

    Tcl_Obj * (*tcl_GetStartupScript) (const char **encodingPtr); /* 623 */
    int (*tcl_CloseEx) (Tcl_Interp *interp, Tcl_Channel chan, int flags); /* 624 */
    int (*tcl_NRExprObj) (Tcl_Interp *interp, Tcl_Obj *objPtr, Tcl_Obj *resultPtr); /* 625 */
    int (*tcl_NRSubstObj) (Tcl_Interp *interp, Tcl_Obj *objPtr, int flags); /* 626 */
    int (*tcl_LoadFile) (Tcl_Interp *interp, Tcl_Obj *pathPtr, const char *const symv[], int flags, void *procPtrs, Tcl_LoadHandle *handlePtr); /* 627 */
    void * (*tcl_FindSymbol) (Tcl_Interp *interp, Tcl_LoadHandle handle, const char *symbol); /* 628 */
    int (*tcl_FSUnloadFile) (Tcl_Interp *interp, Tcl_LoadHandle handlePtr); /* 629 */
    void (*tcl_ZlibStreamSetCompressionDictionary) (Tcl_ZlibStream zhandle, Tcl_Obj *compressionDictionaryObj); /* 630 */
} TclStubs;

#ifdef __cplusplus
extern "C" {
#endif
extern const TclStubs *tclStubsPtr;
#ifdef __cplusplus

	(tclStubsPtr->tcl_NRSubstObj) /* 626 */
#define Tcl_LoadFile \
	(tclStubsPtr->tcl_LoadFile) /* 627 */
#define Tcl_FindSymbol \
	(tclStubsPtr->tcl_FindSymbol) /* 628 */
#define Tcl_FSUnloadFile \
	(tclStubsPtr->tcl_FSUnloadFile) /* 629 */
#define Tcl_ZlibStreamSetCompressionDictionary \
	(tclStubsPtr->tcl_ZlibStreamSetCompressionDictionary) /* 630 */

#endif /* defined(USE_TCL_STUBS) */

/* !END!: Do not edit above this line. */

#if defined(USE_TCL_STUBS)
#   undef Tcl_CreateInterp

    Tcl_GetStartupScript, /* 623 */
    Tcl_CloseEx, /* 624 */
    Tcl_NRExprObj, /* 625 */
    Tcl_NRSubstObj, /* 626 */
    Tcl_LoadFile, /* 627 */
    Tcl_FindSymbol, /* 628 */
    Tcl_FSUnloadFile, /* 629 */
    Tcl_ZlibStreamSetCompressionDictionary, /* 630 */
};

/* !END!: Do not edit above this line. */

/*
 * tclZlib.c --
 *
 *	This file provides the interface to the Zlib library.
 *
 * Copyright (C) 2004-2005 Pascal Scheffers <pascal@scheffers.net>
 * Copyright (C) 2005 Unitas Software B.V.
 * Copyright (c) 2008-2009 Donal K. Fellows
 * Copyright (c) 2008-2012 Donal K. Fellows
 *
 * Parts written by Jean-Claude Wippler, as part of Tclkit, placed in the
 * public domain March 2003.
 *
 * See the file "license.terms" for information on usage and redistribution of
 * this file, and for a DISCLAIMER OF ALL WARRANTIES.
 */

    int format;			/* Flags from the TCL_ZLIB_FORMAT_* */
    int level;			/* Default 5, 0-9 */
    int flush;			/* Stores the flush param for deferred the
				 * decompression. */
    int wbits;			/* The encoded compression mode, so we can
				 * restart the stream if necessary. */
    Tcl_Command cmd;		/* Token for the associated Tcl command. */
    Tcl_Obj *compDictObj;	/* Byte-array object containing compression
				 * dictionary (not dictObj!) to use if
				 * necessary. */
    int flags;			/* Miscellaneous flag bits. */
    GzipHeader *gzHeaderPtr;	/* If we've allocated a gzip header
				 * structure. */
} ZlibStreamHandle;

#define DICT_TO_SET	0x1	/* If we need to set a compression dictionary
				 * in the low-level engine at the next
				 * opportunity. */

/*
 * Macros to make it clearer in some of the twiddlier accesses what is
 * happening.
 */

#define IsRawStream(zshPtr)	((zshPtr)->format == TCL_ZLIB_FORMAT_RAW)
#define HaveDictToSet(zshPtr)	((zshPtr)->flags & DICT_TO_SET)
#define DictWasSet(zshPtr)	((zshPtr)->flags |= ~DICT_TO_SET)

/*
 * Structure used for stacked channel compression and decompression.
 */

typedef struct {
    Tcl_Channel chan;		/* Reference to the channel itself. */
    Tcl_Channel parent;		/* The underlying source and sink of bytes. */
    int flags;			/* General flag bits, see below... */
    int mode;			/* Either the value TCL_ZLIB_STREAM_DEFLATE
				 * for compression on output, or
				 * TCL_ZLIB_STREAM_INFLATE for decompression
				 * on input. */
    int format;			/* What format of data is going on the wire.
				 * Needed so that the correct [fconfigure]
				 * options can be enabled. */
    int readAheadLimit;		/* The maximum number of bytes to read from
				 * the underlying stream in one go. */
    z_stream inStream;		/* Structure used by zlib for decompression of
				 * input. */
    z_stream outStream;		/* Structure used by zlib for compression of
				 * output. */
    char *inBuffer, *outBuffer;	/* Working buffers. */
    int inAllocated, outAllocated;
				/* Sizes of working buffers. */
    GzipHeader inHeader;	/* Header read from input stream, when
				 * decompressing a gzip stream. */
    GzipHeader outHeader;	/* Header to write to an output stream, when
				 * compressing a gzip stream. */
    Tcl_TimerToken timer;	/* Timer used for keeping events fresh. */
    Tcl_DString decompressed;	/* Buffer for decompression results. */
    Tcl_Obj *compDictObj;	/* Byte-array object containing compression
				 * dictionary (not dictObj!) to use if
				 * necessary. */
} ZlibChannelData;

/*
 * Value bits for the flags field. Definitions are:
 *	ASYNC -		Whether this is an asynchronous channel.
 *	IN_HEADER -	Whether the inHeader field has been registered with
 *			the input compressor.

static Tcl_DriverHandlerProc	ZlibTransformEventHandler;
static Tcl_DriverInputProc	ZlibTransformInput;
static Tcl_DriverOutputProc	ZlibTransformOutput;
static Tcl_DriverSetOptionProc	ZlibTransformSetOption;
static Tcl_DriverWatchProc	ZlibTransformWatch;
static Tcl_ObjCmdProc		ZlibCmd;
static Tcl_ObjCmdProc		ZlibStreamCmd;
static Tcl_ObjCmdProc		ZlibStreamAddCmd;
static Tcl_ObjCmdProc		ZlibStreamHeaderCmd;
static Tcl_ObjCmdProc		ZlibStreamPutCmd;

static void		ConvertError(Tcl_Interp *interp, int code);
static void		ConvertError(Tcl_Interp *interp, int code,
			    uLong adler);
static Tcl_Obj *	ConvertErrorToList(int code, uLong adler);
static void		ExtractHeader(gz_header *headerPtr, Tcl_Obj *dictObj);
static int		GenerateHeader(Tcl_Interp *interp, Tcl_Obj *dictObj,
			    GzipHeader *headerPtr, int *extraSizePtr);
static int		ZlibPushSubcmd(Tcl_Interp *interp, int objc,
			    Tcl_Obj *const objv[]);
static inline int	ResultCopy(ZlibChannelData *cd, char *buf,
			    int toRead);
static int		ResultGenerate(ZlibChannelData *cd, int n, int flush,
			    int *errorCodePtr);
static Tcl_Channel	ZlibStackChannelTransform(Tcl_Interp *interp,
			    int mode, int format, int level,
			    Tcl_Channel channel, Tcl_Obj *gzipHeaderDictPtr);
			    Tcl_Channel channel, Tcl_Obj *gzipHeaderDictPtr,
			    Tcl_Obj *compDictObj);
static void		ZlibStreamCleanup(ZlibStreamHandle *zshPtr);
static int		ZlibStreamSubcmd(Tcl_Interp *interp, int objc,
			    Tcl_Obj *const objv[]);
static inline void	ZlibTransformEventTimerKill(ZlibChannelData *cd);
static void		ZlibTransformTimerRun(ClientData clientData);

/*
 * Type of zlib-based compressing and decompressing channels.
 */

 *----------------------------------------------------------------------
 */

static void
ConvertError(
    Tcl_Interp *interp,		/* Interpreter to store the error in. May be
				 * NULL, in which case nothing happens. */
    int code)			/* The zlib error code. */
    int code,			/* The zlib error code. */
    uLong adler)		/* The checksum expected (for Z_NEED_DICT) */
{
    const char *codeStr, *codeStr2 = NULL;
    char codeStrBuf[TCL_INTEGER_SPACE];

    if (interp == NULL) {
	return;
    }

    switch (code) {
	/*
	 * Firstly, the case that is *different* because it's really coming
	 * from the OS and is just being reported via zlib. It should be
	 * really uncommon because Tcl handles all I/O rather than delegating
	 * it to zlib, but proving it can't happen is hard.
	 */

    if (code == Z_ERRNO) {
    case Z_ERRNO:
	Tcl_SetObjResult(interp, Tcl_NewStringObj(Tcl_PosixError(interp),-1));
    } else {
	const char *codeStr, *codeStr2 = NULL;
	char codeStrBuf[TCL_INTEGER_SPACE];
	return;

	/*
	 * Normal errors/conditions, some of which have additional detail and
	 * some which don't. (This is not defined by array lookup because zlib
	 * error codes are sometimes negative.)
	 */

	switch (code) {
	case Z_STREAM_ERROR:	codeStr = "STREAM";	break;
	case Z_DATA_ERROR:	codeStr = "DATA";	break;
	case Z_MEM_ERROR:	codeStr = "MEM";	break;
	case Z_BUF_ERROR:	codeStr = "BUF";	break;
	case Z_VERSION_ERROR:	codeStr = "VERSION";	break;
	default:
	    codeStr = "unknown";
	    codeStr2 = codeStrBuf;
	    sprintf(codeStrBuf, "%d", code);
	    break;
	}
	Tcl_SetObjResult(interp, Tcl_NewStringObj(zError(code), -1));
    case Z_STREAM_ERROR:
	codeStr = "STREAM";
	break;
    case Z_DATA_ERROR:
	codeStr = "DATA";
	break;
    case Z_MEM_ERROR:
	codeStr = "MEM";
	break;
    case Z_BUF_ERROR:
	codeStr = "BUF";
	break;
    case Z_VERSION_ERROR:
	codeStr = "VERSION";
	break;
    case Z_NEED_DICT:
	codeStr = "NEED_DICT";
	codeStr2 = codeStrBuf;
	sprintf(codeStrBuf, "%lu", adler);
	break;
    default:
	codeStr = "unknown";
	codeStr2 = codeStrBuf;
	sprintf(codeStrBuf, "%d", code);
	break;

	/*
	 * Finally, these should _not_ happen! This function is for dealing
	 * with error cases, not non-errors!
	 */

    case Z_OK:
	Tcl_Panic("unexpected zlib result in error handler: Z_OK");
    case Z_STREAM_END:
	Tcl_Panic("unexpected zlib result in error handler: Z_STREAM_END");
    }
    Tcl_SetObjResult(interp, Tcl_NewStringObj(zError(code), -1));

    /*
     * Tricky point! We might pass NULL twice here (and will when the error
     * type is known).
     */

    Tcl_SetErrorCode(interp, "TCL", "ZLIB", codeStr, codeStr2, NULL);
}

static Tcl_Obj *
ConvertErrorToList(
    int code,			/* The zlib error code. */
    uLong adler)		/* The checksum expected (for Z_NEED_DICT) */
{
    Tcl_Obj *objv[4];

    TclNewLiteralStringObj(objv[0], "TCL");
    TclNewLiteralStringObj(objv[1], "ZLIB");
    switch (code) {
    case Z_STREAM_ERROR:
	TclNewLiteralStringObj(objv[2], "STREAM");
	return Tcl_NewListObj(3, objv);
    case Z_DATA_ERROR:
	TclNewLiteralStringObj(objv[2], "DATA");
	return Tcl_NewListObj(3, objv);
    case Z_MEM_ERROR:
	TclNewLiteralStringObj(objv[2], "MEM");
	return Tcl_NewListObj(3, objv);
    case Z_BUF_ERROR:
	TclNewLiteralStringObj(objv[2], "BUF");
	return Tcl_NewListObj(3, objv);
    case Z_VERSION_ERROR:
	TclNewLiteralStringObj(objv[2], "VERSION");
	return Tcl_NewListObj(3, objv);
    case Z_ERRNO:
	TclNewLiteralStringObj(objv[2], "POSIX");
	objv[3] = Tcl_NewStringObj(Tcl_ErrnoId(), -1);
	return Tcl_NewListObj(4, objv);
    case Z_NEED_DICT:
	TclNewLiteralStringObj(objv[2], "NEED_DICT");
	objv[3] = Tcl_NewWideIntObj((Tcl_WideInt) adler);
	return Tcl_NewListObj(4, objv);

	/*
	 * These should _not_ happen! This function is for dealing with error
	 * cases, not non-errors!
	 */

    case Z_OK:
	Tcl_Panic("unexpected zlib result in error handler: Z_OK");
    case Z_STREAM_END:
	Tcl_Panic("unexpected zlib result in error handler: Z_STREAM_END");

	/*
	 * Tricky point! We might pass NULL twice here (and will when the
	 * error type is known).
	 * Catch-all. Should be unreachable because all cases are already
	 * listed above.
	 */

    default:
	TclNewLiteralStringObj(objv[2], "unknown");
	Tcl_SetErrorCode(interp, "TCL", "ZLIB", codeStr, codeStr2, NULL);
	TclNewIntObj(objv[3], code);
	return Tcl_NewListObj(4, objv);
    }
}

/*
 *----------------------------------------------------------------------
 *
 * GenerateHeader --

    } else if (value != NULL) {
	valueStr = Tcl_GetStringFromObj(value, &len);
	Tcl_UtfToExternal(NULL, latin1enc, valueStr, len, 0, NULL,
		headerPtr->nativeCommentBuf, MAX_COMMENT_LEN-1, NULL, &len,
		NULL);
	headerPtr->nativeCommentBuf[len] = '\0';
	headerPtr->header.comment = (Bytef *) headerPtr->nativeCommentBuf;
	if (extraSizePtr != NULL) {
	*extraSizePtr += len;
	    *extraSizePtr += len;
	}
    }

    if (GetValue(interp, dictObj, "crc", &value) != TCL_OK) {
	goto error;
    } else if (value != NULL &&
	    Tcl_GetBooleanFromObj(interp, value, &headerPtr->header.hcrc)) {
	goto error;
    }

    if (GetValue(interp, dictObj, "filename", &value) != TCL_OK) {
	goto error;
    } else if (value != NULL) {
	valueStr = Tcl_GetStringFromObj(value, &len);
	Tcl_UtfToExternal(NULL, latin1enc, valueStr, len, 0, NULL,
		headerPtr->nativeFilenameBuf, MAXPATHLEN-1, NULL, &len, NULL);
	headerPtr->nativeFilenameBuf[len] = '\0';
	headerPtr->header.name = (Bytef *) headerPtr->nativeFilenameBuf;
	if (extraSizePtr != NULL) {
	*extraSizePtr += len;
	    *extraSizePtr += len;
	}
    }

    if (GetValue(interp, dictObj, "os", &value) != TCL_OK) {
	goto error;
    } else if (value != NULL && Tcl_GetIntFromObj(interp, value,
	    &headerPtr->header.os) != TCL_OK) {
	goto error;

		Tcl_NewStringObj(headerPtr->text ? "text" : "binary", -1));
    }

    if (latin1enc != NULL) {
	Tcl_FreeEncoding(latin1enc);
    }
}

static int
SetInflateDictionary(
    z_streamp strm,
    Tcl_Obj *compDictObj)
{
    if (compDictObj != NULL) {
	int length;
	unsigned char *bytes = Tcl_GetByteArrayFromObj(compDictObj, &length);

	return inflateSetDictionary(strm, bytes, (unsigned) length);
    }
    return Z_OK;
}

static int
SetDeflateDictionary(
    z_streamp strm,
    Tcl_Obj *compDictObj)
{
    if (compDictObj != NULL) {
	int length;
	unsigned char *bytes = Tcl_GetByteArrayFromObj(compDictObj, &length);

	return deflateSetDictionary(strm, bytes, (unsigned) length);
    }
    return Z_OK;
}

/*
 *----------------------------------------------------------------------
 *
 * Tcl_ZlibStreamInit --
 *
 *	This command initializes a (de)compression context/handle for

    Tcl_ZlibStream *zshandlePtr)
{
    int wbits = 0;
    int e;
    ZlibStreamHandle *zshPtr = NULL;
    Tcl_DString cmdname;
    Tcl_CmdInfo cmdinfo;
    GzipHeader *gzHeaderPtr = NULL;

    switch (mode) {
    case TCL_ZLIB_STREAM_DEFLATE:
	/*
	 * Compressed format is specified by the wbits parameter. See zlib.h
	 * for details.
	 */

	switch (format) {
	case TCL_ZLIB_FORMAT_RAW:
	    wbits = WBITS_RAW;
	    break;
	case TCL_ZLIB_FORMAT_GZIP:
	    wbits = WBITS_GZIP;
	    if (dictObj) {
		gzHeaderPtr = ckalloc(sizeof(GzipHeader));
		memset(gzHeaderPtr, 0, sizeof(GzipHeader));
		if (GenerateHeader(interp, dictObj, gzHeaderPtr,
			NULL) != TCL_OK) {
		    ckfree(gzHeaderPtr);
		    return TCL_ERROR;
		}
	    }
	    break;
	case TCL_ZLIB_FORMAT_ZLIB:
	    wbits = WBITS_ZLIB;
	    break;
	default:
	    Tcl_Panic("incorrect zlib data format, must be "
		    "TCL_ZLIB_FORMAT_ZLIB, TCL_ZLIB_FORMAT_GZIP or "

	switch (format) {
	case TCL_ZLIB_FORMAT_RAW:
	    wbits = WBITS_RAW;
	    break;
	case TCL_ZLIB_FORMAT_GZIP:
	    wbits = WBITS_GZIP;
	    gzHeaderPtr = ckalloc(sizeof(GzipHeader));
	    memset(gzHeaderPtr, 0, sizeof(GzipHeader));
	    gzHeaderPtr->header.name = (Bytef *)
		    gzHeaderPtr->nativeFilenameBuf;
	    gzHeaderPtr->header.name_max = MAXPATHLEN - 1;
	    gzHeaderPtr->header.comment = (Bytef *)
		    gzHeaderPtr->nativeCommentBuf;
	    gzHeaderPtr->header.name_max = MAX_COMMENT_LEN - 1;
	    break;
	case TCL_ZLIB_FORMAT_ZLIB:
	    wbits = WBITS_ZLIB;
	    break;
	case TCL_ZLIB_FORMAT_AUTO:
	    wbits = WBITS_AUTODETECT;
	    break;

    zshPtr->interp = interp;
    zshPtr->mode = mode;
    zshPtr->format = format;
    zshPtr->level = level;
    zshPtr->wbits = wbits;
    zshPtr->currentInput = NULL;
    zshPtr->streamEnd = 0;
    zshPtr->compDictObj = NULL;
    zshPtr->flags = 0;
    zshPtr->gzHeaderPtr = gzHeaderPtr;
    memset(&zshPtr->stream, 0, sizeof(z_stream));
    zshPtr->stream.adler = 1;

    /*
     * No output buffer available yet
     */

    if (mode == TCL_ZLIB_STREAM_DEFLATE) {
	e = deflateInit2(&zshPtr->stream, level, Z_DEFLATED, wbits,
		MAX_MEM_LEVEL, Z_DEFAULT_STRATEGY);
	if (e == Z_OK && zshPtr->gzHeaderPtr) {
	    e = deflateSetHeader(&zshPtr->stream,
		    &zshPtr->gzHeaderPtr->header);
	}
    } else {
	e = inflateInit2(&zshPtr->stream, wbits);
	if (e == Z_OK && zshPtr->gzHeaderPtr) {
	    e = inflateGetHeader(&zshPtr->stream,
		    &zshPtr->gzHeaderPtr->header);
	}
    }

    if (e != Z_OK) {
	ConvertError(interp, e);
	ConvertError(interp, e, zshPtr->stream.adler);
	goto error;
    }

    /*
     * I could do all this in C, but this is easier.
     */

     */

    if (zshandlePtr) {
	*zshandlePtr = (Tcl_ZlibStream) zshPtr;
    }

    return TCL_OK;

 error:
  error:
    if (zshPtr->compDictObj) {
	Tcl_DecrRefCount(zshPtr->compDictObj);
    }
    if (zshPtr->gzHeaderPtr) {
	ckfree(zshPtr->gzHeaderPtr);
    }
    ckfree(zshPtr);
    return TCL_ERROR;
}

/*
 *----------------------------------------------------------------------
 *

    }
    if (zshPtr->outData) {
	Tcl_DecrRefCount(zshPtr->outData);
    }
    if (zshPtr->currentInput) {
	Tcl_DecrRefCount(zshPtr->currentInput);
    }
    if (zshPtr->compDictObj) {
	Tcl_DecrRefCount(zshPtr->compDictObj);
    }
    if (zshPtr->gzHeaderPtr) {
	ckfree(zshPtr->gzHeaderPtr);
    }

    ckfree(zshPtr);
}

/*
 *----------------------------------------------------------------------
 *

    /*
     * No output buffer available yet.
     */

    if (zshPtr->mode == TCL_ZLIB_STREAM_DEFLATE) {
	e = deflateInit2(&zshPtr->stream, zshPtr->level, Z_DEFLATED,
		zshPtr->wbits, MAX_MEM_LEVEL, Z_DEFAULT_STRATEGY);
	if (e == Z_OK && HaveDictToSet(zshPtr)) {
	    e = SetDeflateDictionary(&zshPtr->stream, zshPtr->compDictObj);
	    if (e == Z_OK) {
		DictWasSet(zshPtr);
	    }
	}
    } else {
	e = inflateInit2(&zshPtr->stream, zshPtr->wbits);
	if (IsRawStream(zshPtr) && HaveDictToSet(zshPtr) && e == Z_OK) {
	    e = SetInflateDictionary(&zshPtr->stream, zshPtr->compDictObj);
	    if (e == Z_OK) {
		DictWasSet(zshPtr);
	    }
	}
    }

    if (e != Z_OK) {
	ConvertError(zshPtr->interp, e);
	ConvertError(zshPtr->interp, e, zshPtr->stream.adler);
	/* TODO:cleanup */
	return TCL_ERROR;
    }

    return TCL_OK;
}


    return zshPtr->stream.adler;
}

/*
 *----------------------------------------------------------------------
 *
 * Tcl_ZlibStreamSetCompressionDictionary --
 *
 *	Sets the compression dictionary for a stream. This will be used as
 *	appropriate for the next compression or decompression action performed
 *	on the stream.
 *
 *----------------------------------------------------------------------
 */

void
Tcl_ZlibStreamSetCompressionDictionary(
    Tcl_ZlibStream zshandle,
    Tcl_Obj *compressionDictionaryObj)
{
    ZlibStreamHandle *zshPtr = (ZlibStreamHandle *) zshandle;

    if (compressionDictionaryObj != NULL) {
	if (Tcl_IsShared(compressionDictionaryObj)) {
	    compressionDictionaryObj =
		    Tcl_DuplicateObj(compressionDictionaryObj);
	}
	Tcl_IncrRefCount(compressionDictionaryObj);
	zshPtr->flags |= DICT_TO_SET;
    } else {
	zshPtr->flags &= ~DICT_TO_SET;
    }
    if (zshPtr->compDictObj != NULL) {
	Tcl_DecrRefCount(zshPtr->compDictObj);
    }
    zshPtr->compDictObj = compressionDictionaryObj;
}

/*
 *----------------------------------------------------------------------
 *
 * Tcl_ZlibStreamPut --
 *
 *	Add data to the stream for compression or decompression from a
 *	bytearray Tcl_Obj.
 *
 *----------------------------------------------------------------------
 */

	}
	return TCL_ERROR;
    }

    if (zshPtr->mode == TCL_ZLIB_STREAM_DEFLATE) {
	zshPtr->stream.next_in = Tcl_GetByteArrayFromObj(data, &size);
	zshPtr->stream.avail_in = size;

	if (HaveDictToSet(zshPtr)) {
	    e = SetDeflateDictionary(&zshPtr->stream, zshPtr->compDictObj);
	    if (e != Z_OK) {
		if (zshPtr->interp) {
		    ConvertError(zshPtr->interp, e, zshPtr->stream.adler);
		}
		return TCL_ERROR;
	    }
	    DictWasSet(zshPtr);
	}

	/*
	 * Deflatebound doesn't seem to take various header sizes into
	 * account, so we add 100 extra bytes.
	 */

	outSize = deflateBound(&zshPtr->stream, zshPtr->stream.avail_in)+100;

		ckfree(dataTmp);
		dataTmp = ckalloc(outSize);
	    }
	    zshPtr->stream.avail_out = outSize;
	    zshPtr->stream.next_out = (Bytef *) dataTmp;

	    e = deflate(&zshPtr->stream, flush);
	}
	if (e != Z_OK && !(flush==Z_FINISH && e==Z_STREAM_END)) {
	    if (zshPtr->interp) {
		ConvertError(zshPtr->interp, e, zshPtr->stream.adler);
	    }
	    return TCL_ERROR;
	}

	/*
	 * And append the final data block.
	 */

	if (outSize - zshPtr->stream.avail_out > 0) {

		 * And remove it from the list
		 */

		Tcl_ListObjReplace(NULL, zshPtr->inData, 0, 1, 0, NULL);
	    }
	}

	/*
	 * When dealing with a raw stream, we set the dictionary here, once.
	 * (You can't do it in response to getting Z_NEED_DATA as raw streams
	 * don't ever issue that.)
	 */

	if (IsRawStream(zshPtr) && HaveDictToSet(zshPtr)) {
	    e = SetInflateDictionary(&zshPtr->stream, zshPtr->compDictObj);
	    if (e != Z_OK) {
		if (zshPtr->interp) {
		    ConvertError(zshPtr->interp, e, zshPtr->stream.adler);
		}
		return TCL_ERROR;
	    }
	    DictWasSet(zshPtr);
	}
	e = inflate(&zshPtr->stream, zshPtr->flush);
	if (e == Z_NEED_DICT && HaveDictToSet(zshPtr)) {
	    e = SetInflateDictionary(&zshPtr->stream, zshPtr->compDictObj);
	    if (e == Z_OK) {
		DictWasSet(zshPtr);
		e = inflate(&zshPtr->stream, zshPtr->flush);
	    }
	};
	Tcl_ListObjLength(NULL, zshPtr->inData, &listLen);

	while ((zshPtr->stream.avail_out > 0)
		&& (e == Z_OK || e == Z_BUF_ERROR) && (listLen > 0)) {
	    /*
	     * State: We have not satisfied the request yet and there may be
	     * more to inflate.

	    Tcl_ListObjReplace(NULL, zshPtr->inData, 0, 1, 0, NULL);
	    listLen--;

	    /*
	     * And call inflate again.
	     */

	    do {
	    e = inflate(&zshPtr->stream, zshPtr->flush);
		e = inflate(&zshPtr->stream, zshPtr->flush);
		if (e != Z_NEED_DICT || !HaveDictToSet(zshPtr)) {
		    break;
		}
		e = SetInflateDictionary(&zshPtr->stream,zshPtr->compDictObj);
		DictWasSet(zshPtr);
	    } while (e == Z_OK);
	}
	if (zshPtr->stream.avail_out > 0) {
	    Tcl_SetByteArrayLength(data,
		    existing + count - zshPtr->stream.avail_out);
	}
	if (!(e==Z_OK || e==Z_STREAM_END || e==Z_BUF_ERROR)) {
	    Tcl_SetByteArrayLength(data, existing);
	    ConvertError(zshPtr->interp, e);
	    ConvertError(zshPtr->interp, e, zshPtr->stream.adler);
	    return TCL_ERROR;
	}
	if (e == Z_STREAM_END) {
	    zshPtr->streamEnd = 1;
	    if (zshPtr->currentInput) {
		Tcl_DecrRefCount(zshPtr->currentInput);
		zshPtr->currentInput = 0;

     */

    Tcl_SetByteArrayLength(obj, stream.total_out);
    Tcl_SetObjResult(interp, obj);
    return TCL_OK;

  error:
    ConvertError(interp, e);
    ConvertError(interp, e, stream.adler);
    TclDecrRefCount(obj);
    return TCL_ERROR;
}

/*
 *----------------------------------------------------------------------
 *

	ckfree(commentBuf);
    }
    Tcl_SetObjResult(interp, obj);
    return TCL_OK;

  error:
    TclDecrRefCount(obj);
    ConvertError(interp, e);
    ConvertError(interp, e, stream.adler);
    if (nameBuf) {
	ckfree(nameBuf);
    }
    if (commentBuf) {
	ckfree(commentBuf);
    }
    return TCL_ERROR;

static int
ZlibCmd(
    ClientData notUsed,
    Tcl_Interp *interp,
    int objc,
    Tcl_Obj *const objv[])
{
    int command, dlen, mode, format, i, option, level = -1;
    int command, dlen, i, option, level = -1;
    unsigned start, buffersize = 0;
    Tcl_ZlibStream zh;
    Byte *data;
    Tcl_Obj *headerDictObj, *headerVarObj;
    Tcl_Obj *headerDictObj;
    const char *extraInfoStr = NULL;
    static const char *const commands[] = {
	"adler32", "compress", "crc32", "decompress", "deflate", "gunzip",
	"gzip", "inflate", "push", "stream",
	NULL
    };
    enum zlibCommands {
	CMD_ADLER, CMD_COMPRESS, CMD_CRC, CMD_DECOMPRESS, CMD_DEFLATE,
	CMD_GUNZIP, CMD_GZIP, CMD_INFLATE, CMD_PUSH, CMD_STREAM
    };
    static const char *const stream_formats[] = {
	"compress", "decompress", "deflate", "gunzip", "gzip", "inflate",
	NULL
    };
    enum zlibFormats {
	FMT_COMPRESS, FMT_DECOMPRESS, FMT_DEFLATE, FMT_GUNZIP, FMT_GZIP,
	FMT_INFLATE
    };

    if (objc < 2) {
	Tcl_WrongNumArgs(interp, 1, objv, "command arg ?...?");
	return TCL_ERROR;
    }
    if (Tcl_GetIndexFromObj(interp, objv[1], commands, "command", 0,
	    &command) != TCL_OK) {

	    return TCL_ERROR;
	}
	if (objc < 4) {
	    start = Tcl_ZlibAdler32(0, NULL, 0);
	}
	data = Tcl_GetByteArrayFromObj(objv[2], &dlen);
	Tcl_SetObjResult(interp, Tcl_NewWideIntObj((Tcl_WideInt)
		Tcl_ZlibAdler32(start, data, dlen)));
		(uLong) Tcl_ZlibAdler32(start, data, dlen)));
	return TCL_OK;
    case CMD_CRC:			/* crc32 str ?startvalue?
					 * -> checksum */
	if (objc < 3 || objc > 4) {
	    Tcl_WrongNumArgs(interp, 2, objv, "data ?startValue?");
	    return TCL_ERROR;
	}
	if (objc>3 && Tcl_GetIntFromObj(interp, objv[3],
		(int *) &start) != TCL_OK) {
	    return TCL_ERROR;
	}
	if (objc < 4) {
	    start = Tcl_ZlibCRC32(0, NULL, 0);
	}
	data = Tcl_GetByteArrayFromObj(objv[2], &dlen);
	Tcl_SetObjResult(interp, Tcl_NewWideIntObj((Tcl_WideInt)
		Tcl_ZlibCRC32(start, data, dlen)));
		(uLong) Tcl_ZlibCRC32(start, data, dlen)));
	return TCL_OK;
    case CMD_DEFLATE:			/* deflate data ?level?
					 * -> rawCompressedData */
	if (objc < 3 || objc > 4) {
	    Tcl_WrongNumArgs(interp, 2, objv, "data ?level?");
	    return TCL_ERROR;
	}

	    }
	    if (buffersize < 16 || buffersize > 65536) {
		goto badBuffer;
	    }
	}
	return Tcl_ZlibInflate(interp, TCL_ZLIB_FORMAT_ZLIB, objv[2],
		buffersize, NULL);
    case CMD_GUNZIP:			/* gunzip gzippeddata ?bufferSize?
    case CMD_GUNZIP: {			/* gunzip gzippeddata ?bufferSize?
					 *	-> decompressedData */
	Tcl_Obj *headerVarObj;

	if (objc < 3 || objc > 5 || ((objc & 1) == 0)) {
	    Tcl_WrongNumArgs(interp, 2, objv, "data ?-headerVar varName?");
	    return TCL_ERROR;
	}
	headerDictObj = headerVarObj = NULL;
	for (i=3 ; i<objc ; i+=2) {
	    static const char *const gunzipopts[] = {

		headerDictObj, TCL_LEAVE_ERR_MSG) == NULL) {
	    if (headerDictObj) {
		TclDecrRefCount(headerDictObj);
	    }
	    return TCL_ERROR;
	}
	return TCL_OK;
    }
    case CMD_STREAM:			/* stream deflate/inflate/...gunzip \
					 *    ?level?
					 *    ?options...?
					 *	-> handleCmd */
	if (objc < 3 || objc > 4) {
	    Tcl_WrongNumArgs(interp, 2, objv, "mode ?level?");
	    return TCL_ERROR;
	}
	if (Tcl_GetIndexFromObj(interp, objv[2], stream_formats, "mode", 0,
		&format) != TCL_OK) {
	    return TCL_ERROR;
	}
	mode = TCL_ZLIB_STREAM_INFLATE;
	switch ((enum zlibFormats) format) {
	case FMT_DEFLATE:
	    mode = TCL_ZLIB_STREAM_DEFLATE;
	case FMT_INFLATE:
	    format = TCL_ZLIB_FORMAT_RAW;
	    break;
	case FMT_COMPRESS:
	    mode = TCL_ZLIB_STREAM_DEFLATE;
	case FMT_DECOMPRESS:
	    format = TCL_ZLIB_FORMAT_ZLIB;
	    break;
	case FMT_GZIP:
	    mode = TCL_ZLIB_STREAM_DEFLATE;
	case FMT_GUNZIP:
	    format = TCL_ZLIB_FORMAT_GZIP;
	    break;
	}
	if (objc == 4) {
	    if (Tcl_GetIntFromObj(interp, objv[3],
	return ZlibStreamSubcmd(interp, objc, objv);
		    (int *) &level) != TCL_OK) {
		return TCL_ERROR;
	    }
	    if (level < 0 || level > 9) {
		goto badLevel;
	    }
	} else {
	    level = Z_DEFAULT_COMPRESSION;
	}
	if (Tcl_ZlibStreamInit(interp, mode, format, level, NULL,
		&zh) != TCL_OK) {
	    return TCL_ERROR;
	}
	Tcl_SetObjResult(interp, Tcl_ZlibStreamGetCommandName(zh));
	return TCL_OK;
    case CMD_PUSH: {			/* push mode channel options...
    case CMD_PUSH:			/* push mode channel options...
					 *	-> channel */
	Tcl_Channel chan;
	int chanMode;
	static const char *const pushOptions[] = {
	    "-header", "-level", "-limit",
	    NULL
	};
	enum pushOptions {poHeader, poLevel, poLimit};
	Tcl_Obj *headerObj = NULL;
	int limit = 1, dummy;

	return ZlibPushSubcmd(interp, objc, objv);
	if (objc < 4) {
	    Tcl_WrongNumArgs(interp, 2, objv, "mode channel ?options...?");
	    return TCL_ERROR;
	}

	if (Tcl_GetIndexFromObj(interp, objv[2], stream_formats, "mode", 0,
		&format) != TCL_OK) {
	    return TCL_ERROR;
	}
	switch ((enum zlibFormats) format) {
	case FMT_DEFLATE:
	    mode = TCL_ZLIB_STREAM_DEFLATE;
	    format = TCL_ZLIB_FORMAT_RAW;
	    break;
	case FMT_INFLATE:
	    mode = TCL_ZLIB_STREAM_INFLATE;
	    format = TCL_ZLIB_FORMAT_RAW;
	    break;
	case FMT_COMPRESS:
	    mode = TCL_ZLIB_STREAM_DEFLATE;
	    format = TCL_ZLIB_FORMAT_ZLIB;
	    break;
	case FMT_DECOMPRESS:
	    mode = TCL_ZLIB_STREAM_INFLATE;
	    format = TCL_ZLIB_FORMAT_ZLIB;
	    break;
	case FMT_GZIP:
	    mode = TCL_ZLIB_STREAM_DEFLATE;
	    format = TCL_ZLIB_FORMAT_GZIP;
	    break;
	case FMT_GUNZIP:
	    mode = TCL_ZLIB_STREAM_INFLATE;
	    format = TCL_ZLIB_FORMAT_GZIP;
	    break;
	default:
	    Tcl_AppendResult(interp, "IMPOSSIBLE", NULL);
	    return TCL_ERROR;
	}

	if (TclGetChannelFromObj(interp, objv[3], &chan, &chanMode,
		0) != TCL_OK) {
	    return TCL_ERROR;
	}

	/*
	 * Sanity checks.
	 */

	if (mode == TCL_ZLIB_STREAM_DEFLATE && !(chanMode & TCL_WRITABLE)) {
	    Tcl_AppendResult(interp,
		    "compression may only be applied to writable channels",
		    NULL);
	    Tcl_SetErrorCode(interp, "TCL", "ZIP", "UNWRITABLE", NULL);
	    return TCL_ERROR;
	}
	if (mode == TCL_ZLIB_STREAM_INFLATE && !(chanMode & TCL_READABLE)) {
	    Tcl_AppendResult(interp,
		    "decompression may only be applied to readable channels",
		    NULL);
	    Tcl_SetErrorCode(interp, "TCL", "ZIP", "UNREADABLE", NULL);
	    return TCL_ERROR;
	}

	/*
	 * Parse options.
	 */

	level = Z_DEFAULT_COMPRESSION;
	for (i=4 ; i<objc ; i++) {
	    if (Tcl_GetIndexFromObj(interp, objv[i], pushOptions, "option", 0,
		    &option) != TCL_OK) {
		return TCL_ERROR;
	    }
	    switch ((enum pushOptions) option) {
	    case poHeader:
		if (++i > objc-1) {
		    Tcl_AppendResult(interp,
			    "value missing for -header option", NULL);
		    Tcl_SetErrorCode(interp, "TCL", "ZIP", "NOVAL", NULL);
		    return TCL_ERROR;
		}
		headerObj = objv[i];
		if (Tcl_DictObjSize(interp, headerObj, &dummy) != TCL_OK) {
		    Tcl_AddErrorInfo(interp, "\n    (in -header option)");
		    return TCL_ERROR;
		}
		break;
	    case poLevel:
		if (++i > objc-1) {
		    Tcl_AppendResult(interp,
			    "value missing for -level option", NULL);
		    Tcl_SetErrorCode(interp, "TCL", "ZIP", "NOVAL", NULL);
		    return TCL_ERROR;
		}
		if (Tcl_GetIntFromObj(interp, objv[i],
			(int *) &level) != TCL_OK) {
		    Tcl_AddErrorInfo(interp, "\n    (in -level option)");
		    return TCL_ERROR;
		}
		if (level < 0 || level > 9) {
		    extraInfoStr = "\n    (in -level option)";
		    goto badLevel;
		}
		break;
	    case poLimit:
		if (++i > objc-1) {
		    Tcl_AppendResult(interp,
			    "value missing for -limit option", NULL);
		    Tcl_SetErrorCode(interp, "TCL", "ZIP", "NOVAL", NULL);
		    return TCL_ERROR;
		}
		if (Tcl_GetIntFromObj(interp, objv[i],
			(int *) &limit) != TCL_OK) {
		    Tcl_AddErrorInfo(interp, "\n    (in -limit option)");
		    return TCL_ERROR;
		}
		if (limit < 1) {
		    limit = 1;
		}
		break;
	    }
	}

	if (ZlibStackChannelTransform(interp, mode, format, level, chan,
		headerObj) == NULL) {
	    return TCL_ERROR;
	}
	Tcl_SetObjResult(interp, objv[3]);
	return TCL_OK;
    }
    };

    return TCL_ERROR;

  badLevel:
    Tcl_AppendResult(interp, "level must be 0 to 9", NULL);
    Tcl_SetErrorCode(interp, "TCL", "VALUE", "COMPRESSIONLEVEL", NULL);
    if (extraInfoStr) {
	Tcl_AddErrorInfo(interp, extraInfoStr);
    }
    return TCL_ERROR;
  badBuffer:
    Tcl_AppendResult(interp, "buffer size must be 32 to 65536", NULL);
    Tcl_SetErrorCode(interp, "TCL", "VALUE", "BUFFERSIZE", NULL);
    return TCL_ERROR;
}

/*
 *----------------------------------------------------------------------
 *
 * ZlibStreamSubcmd --
 *
 *	Implementation of the [zlib stream] subcommand.
 *
 *----------------------------------------------------------------------
 */

static int
ZlibStreamSubcmd(
    Tcl_Interp *interp,
    int objc,
    Tcl_Obj *const objv[])
{
    static const char *const stream_formats[] = {
	"compress", "decompress", "deflate", "gunzip", "gzip", "inflate",
	NULL
    };
    enum zlibFormats {
	FMT_COMPRESS, FMT_DECOMPRESS, FMT_DEFLATE, FMT_GUNZIP, FMT_GZIP,
	FMT_INFLATE
    };
    int i, format, mode, option, level;
    typedef struct {
	const char *name;
	Tcl_Obj **valueVar;
    } OptDescriptor;
    Tcl_Obj *compDictObj = NULL;
    Tcl_Obj *gzipHeaderObj = NULL;
    Tcl_Obj *levelObj = NULL;
    const OptDescriptor compressionOpts[] = {
	{ "-dictionary", &compDictObj },
	{ "-level", &levelObj },
	{ NULL, NULL }
    };
    const OptDescriptor gzipOpts[] = {
	{ "-header", &gzipHeaderObj },
	{ "-level", &levelObj },
	{ NULL, NULL }
    };
    const OptDescriptor expansionOpts[] = {
	{ "-dictionary", &compDictObj },
	{ NULL, NULL }
    };
    const OptDescriptor gunzipOpts[] = {
	{ NULL, NULL }
    };
    const OptDescriptor *desc;
    Tcl_ZlibStream zh;

    if (objc < 3 || !(objc & 1)) {
	Tcl_WrongNumArgs(interp, 2, objv, "mode ?-option value...?");
	return TCL_ERROR;
    }
    if (Tcl_GetIndexFromObj(interp, objv[2], stream_formats, "mode", 0,
	    &format) != TCL_OK) {
	return TCL_ERROR;
    }

    /*
     * The format determines the compression mode and the options that may be
     * specified.
     */

    switch ((enum zlibFormats) format) {
    case FMT_DEFLATE:
	desc = compressionOpts;
	mode = TCL_ZLIB_STREAM_DEFLATE;
	format = TCL_ZLIB_FORMAT_RAW;
	break;
    case FMT_INFLATE:
	desc = expansionOpts;
	mode = TCL_ZLIB_STREAM_INFLATE;
	format = TCL_ZLIB_FORMAT_RAW;
	break;
    case FMT_COMPRESS:
	desc = compressionOpts;
	mode = TCL_ZLIB_STREAM_DEFLATE;
	format = TCL_ZLIB_FORMAT_ZLIB;
	break;
    case FMT_DECOMPRESS:
	desc = expansionOpts;
	mode = TCL_ZLIB_STREAM_INFLATE;
	format = TCL_ZLIB_FORMAT_ZLIB;
	break;
    case FMT_GZIP:
	desc = gzipOpts;
	mode = TCL_ZLIB_STREAM_DEFLATE;
	format = TCL_ZLIB_FORMAT_GZIP;
	break;
    case FMT_GUNZIP:
	desc = gunzipOpts;
	mode = TCL_ZLIB_STREAM_INFLATE;
	format = TCL_ZLIB_FORMAT_GZIP;
	break;
    default:
	Tcl_AppendResult(interp, "IMPOSSIBLE", NULL);
	return TCL_ERROR;
    }

    /*
     * Parse the options.
     */

    for (i=3 ; i<objc ; i+=2) {
	if (Tcl_GetIndexFromObjStruct(interp, objv[i], desc,
		sizeof(OptDescriptor), "option", 0, &option) != TCL_OK) {
	    return TCL_ERROR;
	}
	*desc[option].valueVar = objv[i+1];

	/*
	 * Drop the cache on the option name; table address not constant.
	 */

	TclFreeIntRep(objv[i]);
    }

    /*
     * If a compression level was given, parse it (integral: 0..9). Otherwise
     * use the default.
     */

    if (levelObj == NULL) {
	level = Z_DEFAULT_COMPRESSION;
    } else if (Tcl_GetIntFromObj(interp, levelObj, &level) != TCL_OK) {
	return TCL_ERROR;
    } else if (level < 0 || level > 9) {
	Tcl_AppendResult(interp, "level must be 0 to 9", NULL);
	Tcl_SetErrorCode(interp, "TCL", "VALUE", "COMPRESSIONLEVEL", NULL);
	Tcl_AddErrorInfo(interp, "\n    (in -level option)");
	return TCL_ERROR;
    }

    /*
     * Construct the stream now we know its configuration.
     */

    if (Tcl_ZlibStreamInit(interp, mode, format, level, gzipHeaderObj,
	    &zh) != TCL_OK) {
	return TCL_ERROR;
    }
    if (compDictObj != NULL) {
	Tcl_ZlibStreamSetCompressionDictionary(zh, compDictObj);
    }
    Tcl_SetObjResult(interp, Tcl_ZlibStreamGetCommandName(zh));
    return TCL_OK;
}

/*
 *----------------------------------------------------------------------
 *
 * ZlibPushSubcmd --
 *
 *	Implementation of the [zlib push] subcommand.
 *
 *----------------------------------------------------------------------
 */

static int
ZlibPushSubcmd(
    Tcl_Interp *interp,
    int objc,
    Tcl_Obj *const objv[])
{
    static const char *const stream_formats[] = {
	"compress", "decompress", "deflate", "gunzip", "gzip", "inflate",
	NULL
    };
    enum zlibFormats {
	FMT_COMPRESS, FMT_DECOMPRESS, FMT_DEFLATE, FMT_GUNZIP, FMT_GZIP,
	FMT_INFLATE
    };
    Tcl_Channel chan;
    int chanMode, format, mode, level, i, option;
    static const char *const pushOptions[] = {
	"-dictionary", "-header", "-level", "-limit", NULL
    };
    enum pushOptions {poDictionary, poHeader, poLevel, poLimit};
    Tcl_Obj *headerObj = NULL, *compDictObj = NULL;
    int limit = 1, dummy;

    if (objc < 4) {
	Tcl_WrongNumArgs(interp, 2, objv, "mode channel ?options...?");
	return TCL_ERROR;
    }

    if (Tcl_GetIndexFromObj(interp, objv[2], stream_formats, "mode", 0,
	    &format) != TCL_OK) {
	return TCL_ERROR;
    }
    switch ((enum zlibFormats) format) {
    case FMT_DEFLATE:
	mode = TCL_ZLIB_STREAM_DEFLATE;
	format = TCL_ZLIB_FORMAT_RAW;
	break;
    case FMT_INFLATE:
	mode = TCL_ZLIB_STREAM_INFLATE;
	format = TCL_ZLIB_FORMAT_RAW;
	break;
    case FMT_COMPRESS:
	mode = TCL_ZLIB_STREAM_DEFLATE;
	format = TCL_ZLIB_FORMAT_ZLIB;
	break;
    case FMT_DECOMPRESS:
	mode = TCL_ZLIB_STREAM_INFLATE;
	format = TCL_ZLIB_FORMAT_ZLIB;
	break;
    case FMT_GZIP:
	mode = TCL_ZLIB_STREAM_DEFLATE;
	format = TCL_ZLIB_FORMAT_GZIP;
	break;
    case FMT_GUNZIP:
	mode = TCL_ZLIB_STREAM_INFLATE;
	format = TCL_ZLIB_FORMAT_GZIP;
	break;
    default:
	Tcl_AppendResult(interp, "IMPOSSIBLE", NULL);
	return TCL_ERROR;
    }

    if (TclGetChannelFromObj(interp, objv[3], &chan, &chanMode, 0) != TCL_OK){
	return TCL_ERROR;
    }

    /*
     * Sanity checks.
     */

    if (mode == TCL_ZLIB_STREAM_DEFLATE && !(chanMode & TCL_WRITABLE)) {
	Tcl_AppendResult(interp,
		"compression may only be applied to writable channels", NULL);
	Tcl_SetErrorCode(interp, "TCL", "ZIP", "UNWRITABLE", NULL);
	return TCL_ERROR;
    }
    if (mode == TCL_ZLIB_STREAM_INFLATE && !(chanMode & TCL_READABLE)) {
	Tcl_AppendResult(interp,
		"decompression may only be applied to readable channels",
		NULL);
	Tcl_SetErrorCode(interp, "TCL", "ZIP", "UNREADABLE", NULL);
	return TCL_ERROR;
    }

    /*
     * Parse options.
     */

    level = Z_DEFAULT_COMPRESSION;
    for (i=4 ; i<objc ; i++) {
	if (Tcl_GetIndexFromObj(interp, objv[i], pushOptions, "option", 0,
		&option) != TCL_OK) {
	    return TCL_ERROR;
	}
	switch ((enum pushOptions) option) {
	case poHeader:
	    if (++i > objc-1) {
		Tcl_AppendResult(interp, "value missing for -header option",
			NULL);
		Tcl_SetErrorCode(interp, "TCL", "ZIP", "NOVAL", NULL);
		return TCL_ERROR;
	    }
	    headerObj = objv[i];
	    if (Tcl_DictObjSize(interp, headerObj, &dummy) != TCL_OK) {
		Tcl_AddErrorInfo(interp, "\n    (in -header option)");
		return TCL_ERROR;
	    }
	    break;
	case poLevel:
	    if (++i > objc-1) {
		Tcl_AppendResult(interp,
			"value missing for -level option", NULL);
		Tcl_SetErrorCode(interp, "TCL", "ZIP", "NOVAL", NULL);
		return TCL_ERROR;
	    }
	    if (Tcl_GetIntFromObj(interp, objv[i], (int*) &level) != TCL_OK) {
		Tcl_AddErrorInfo(interp, "\n    (in -level option)");
		return TCL_ERROR;
	    }
	    if (level < 0 || level > 9) {
		Tcl_AppendResult(interp, "level must be 0 to 9", NULL);
		Tcl_SetErrorCode(interp, "TCL", "VALUE", "COMPRESSIONLEVEL",
			NULL);
		Tcl_AddErrorInfo(interp, "\n    (in -level option)");
		return TCL_ERROR;
	    }
	    break;
	case poLimit:
	    if (++i > objc-1) {
		Tcl_AppendResult(interp, "value missing for -limit option",
			NULL);
		Tcl_SetErrorCode(interp, "TCL", "ZIP", "NOVAL", NULL);
		return TCL_ERROR;
	    }
	    if (Tcl_GetIntFromObj(interp, objv[i], (int*) &limit) != TCL_OK) {
		Tcl_AddErrorInfo(interp, "\n    (in -limit option)");
		return TCL_ERROR;
	    }
	    if (limit < 1) {
		limit = 1;
	    }
	    break;
	case poDictionary:
	    if (++i > objc-1) {
		Tcl_AppendResult(interp,
			"value missing for -dictionary option", NULL);
		Tcl_SetErrorCode(interp, "TCL", "ZIP", "NOVAL", NULL);
		return TCL_ERROR;
	    }
	    if (format == TCL_ZLIB_FORMAT_GZIP) {
		Tcl_AppendResult(interp, "a compression dictionary may not "
			"be set in the gzip format", NULL);
		Tcl_SetErrorCode(interp, "TCL", "ZIP", "BADOPT", NULL);
		return TCL_ERROR;
	    }
	    compDictObj = objv[i];
	    break;
	}
    }

    if (ZlibStackChannelTransform(interp, mode, format, level, chan,
	    headerObj, compDictObj) == NULL) {
	return TCL_ERROR;
    }
    Tcl_SetObjResult(interp, objv[3]);
    return TCL_OK;
}

/*
 *----------------------------------------------------------------------
 *
 * ZlibStreamCmd --
 *
 *	Implementation of the commands returned by [zlib stream].
 *
 *----------------------------------------------------------------------
 */

static int
ZlibStreamCmd(
    ClientData cd,
    Tcl_Interp *interp,
    int objc,
    Tcl_Obj *const objv[])
{
    Tcl_ZlibStream zstream = cd;
    int command, index, count, code, buffersize = -1, flush = -1, i;
    int command, count, code;
    Tcl_Obj *obj;
    static const char *const cmds[] = {
	"add", "checksum", "close", "eof", "finalize", "flush",
	"fullflush", "get", "put", "reset",
	"fullflush", "get", "header", "put", "reset",
	NULL
    };
    enum zlibStreamCommands {
	zs_add, zs_checksum, zs_close, zs_eof, zs_finalize, zs_flush,
	zs_fullflush, zs_get, zs_put, zs_reset
	zs_fullflush, zs_get, zs_header, zs_put, zs_reset
    };
    static const char *const add_options[] = {
	"-buffer", "-finalize", "-flush", "-fullflush", NULL
    };
    enum addOptions {
	ao_buffer, ao_finalize, ao_flush, ao_fullflush
    };

    if (objc < 2) {
	Tcl_WrongNumArgs(interp, 1, objv, "option data ?...?");
	return TCL_ERROR;
    }

    if (Tcl_GetIndexFromObj(interp, objv[1], cmds, "option", 0,
	    &command) != TCL_OK) {
	return TCL_ERROR;
    }

    switch ((enum zlibStreamCommands) command) {
    case zs_add:		/* $strm add ?$flushopt? $data */
	for (i=2; i<objc-1; i++) {
	    if (Tcl_GetIndexFromObj(interp, objv[i], add_options, "option", 0,
		    &index) != TCL_OK) {
		return TCL_ERROR;
	    }

	return ZlibStreamAddCmd(zstream, interp, objc, objv);
	    switch ((enum addOptions) index) {
	    case ao_flush: /* -flush */
		if (flush > -1) {
		    flush = -2;
		} else {
		    flush = Z_SYNC_FLUSH;
		}
		break;
	    case ao_fullflush: /* -fullflush */
		if (flush > -1) {
		    flush = -2;
		} else {
		    flush = Z_FULL_FLUSH;
		}
		break;
	    case ao_finalize: /* -finalize */
		if (flush > -1) {
		    flush = -2;
		} else {
		    flush = Z_FINISH;
		}
		break;
	    case ao_buffer: /* -buffer */
		if (i == objc-2) {
		    Tcl_AppendResult(interp, "\"-buffer\" option must be "
			    "followed by integer decompression buffersize",
			    NULL);
		    Tcl_SetErrorCode(interp, "TCL", "ZIP", "NOVAL", NULL);
		    return TCL_ERROR;
		}
		if (Tcl_GetIntFromObj(interp, objv[i+1],
			&buffersize) != TCL_OK) {
		    return TCL_ERROR;
		}
		if (buffersize < 1 || buffersize > 65536) {
		    Tcl_AppendResult(interp,
			    "buffer size must be 32 to 65536", NULL);
		    Tcl_SetErrorCode(interp, "TCL", "VALUE", "BUFFERSIZE",
			    NULL);
		    return TCL_ERROR;
		}
	    }

    case zs_header:		/* $strm header */
	    if (flush == -2) {
		Tcl_AppendResult(interp, "\"-flush\", \"-fullflush\" and "
			"\"-finalize\" options are mutually exclusive", NULL);
		Tcl_SetErrorCode(interp, "TCL", "ZIP", "EXCLUSIVE", NULL);
		return TCL_ERROR;
	    }
	}
	if (flush == -1) {
	    flush = 0;
	}

	return ZlibStreamHeaderCmd(zstream, interp, objc, objv);
	if (Tcl_ZlibStreamPut(zstream, objv[objc-1], flush) != TCL_OK) {
	    return TCL_ERROR;
	}
	TclNewObj(obj);
	code = Tcl_ZlibStreamGet(zstream, obj, buffersize);
	if (code == TCL_OK) {
	    Tcl_SetObjResult(interp, obj);
	} else {
	    TclDecrRefCount(obj);
	}
	return code;

    case zs_put:		/* $strm put ?$flushopt? $data */
	for (i=2; i<objc-1; i++) {
	    if (Tcl_GetIndexFromObj(interp, objv[i], add_options, "option", 0,
		    &index) != TCL_OK) {
		return TCL_ERROR;
	    }

	return ZlibStreamPutCmd(zstream, interp, objc, objv);
	    switch ((enum addOptions) index) {
	    case ao_flush: /* -flush */
		if (flush > -1) {
		    flush = -2;
		} else {
		    flush = Z_SYNC_FLUSH;
		}
		break;
	    case ao_fullflush: /* -fullflush */
		if (flush > -1) {
		    flush = -2;
		} else {
		    flush = Z_FULL_FLUSH;
		}
		break;
	    case ao_finalize: /* -finalize */
		if (flush > -1) {
		    flush = -2;
		} else {
		    flush = Z_FINISH;
		}
		break;
	    case ao_buffer:
		Tcl_AppendResult(interp,
			"\"-buffer\" option not supported here", NULL);
		return TCL_ERROR;
	    }
	    if (flush == -2) {
		Tcl_AppendResult(interp, "\"-flush\", \"-fullflush\" and "
			"\"-finalize\" options are mutually exclusive", NULL);
		Tcl_SetErrorCode(interp, "TCL", "ZIP", "EXCLUSIVE", NULL);
		return TCL_ERROR;
	    }
	}
	if (flush == -1) {
	    flush = 0;
	}
	return Tcl_ZlibStreamPut(zstream, objv[objc-1], flush);

    case zs_get:		/* $strm get ?count? */
	if (objc > 3) {
	    Tcl_WrongNumArgs(interp, 2, objv, "?count?");
	    return TCL_ERROR;
	}

	return TCL_OK;
    case zs_checksum:		/* $strm checksum */
	if (objc != 2) {
	    Tcl_WrongNumArgs(interp, 2, objv, NULL);
	    return TCL_ERROR;
	}
	Tcl_SetObjResult(interp, Tcl_NewWideIntObj((Tcl_WideInt)
		Tcl_ZlibStreamChecksum(zstream)));
		(uLong) Tcl_ZlibStreamChecksum(zstream)));
	return TCL_OK;
    case zs_reset:		/* $strm reset */
	if (objc != 2) {
	    Tcl_WrongNumArgs(interp, 2, objv, NULL);
	    return TCL_ERROR;
	}
	return Tcl_ZlibStreamReset(zstream);
    }

    return TCL_OK;
}

static int
ZlibStreamAddCmd(
    ClientData cd,
    Tcl_Interp *interp,
    int objc,
    Tcl_Obj *const objv[])
{
    Tcl_ZlibStream zstream = cd;
    int index, code, buffersize = -1, flush = -1, i;
    Tcl_Obj *obj, *compDictObj = NULL;
    static const char *const add_options[] = {
	"-buffer", "-dictionary", "-finalize", "-flush", "-fullflush", NULL
    };
    enum addOptions {
	ao_buffer, ao_dictionary, ao_finalize, ao_flush, ao_fullflush
    };

    for (i=2; i<objc-1; i++) {
	if (Tcl_GetIndexFromObj(interp, objv[i], add_options, "option", 0,
		&index) != TCL_OK) {
	    return TCL_ERROR;
	}

	switch ((enum addOptions) index) {
	case ao_flush: /* -flush */
	    if (flush > -1) {
		flush = -2;
	    } else {
		flush = Z_SYNC_FLUSH;
	    }
	    break;
	case ao_fullflush: /* -fullflush */
	    if (flush > -1) {
		flush = -2;
	    } else {
		flush = Z_FULL_FLUSH;
	    }
	    break;
	case ao_finalize: /* -finalize */
	    if (flush > -1) {
		flush = -2;
	    } else {
		flush = Z_FINISH;
	    }
	    break;
	case ao_buffer: /* -buffer */
	    if (i == objc-2) {
		Tcl_AppendResult(interp, "\"-buffer\" option must be "
			"followed by integer decompression buffersize", NULL);
		Tcl_SetErrorCode(interp, "TCL", "ZIP", "NOVAL", NULL);
		return TCL_ERROR;
	    }
	    if (Tcl_GetIntFromObj(interp, objv[++i], &buffersize) != TCL_OK) {
		return TCL_ERROR;
	    }
	    if (buffersize < 1 || buffersize > 65536) {
		Tcl_AppendResult(interp, "buffer size must be 32 to 65536",
			NULL);
		Tcl_SetErrorCode(interp, "TCL", "VALUE", "BUFFERSIZE", NULL);
		return TCL_ERROR;
	    }
	    break;
	case ao_dictionary:
	    if (i == objc-2) {
		Tcl_AppendResult(interp, "\"-dictionary\" option must be "
			"followed by compression dictionary bytes", NULL);
		Tcl_SetErrorCode(interp, "TCL", "ZIP", "NOVAL", NULL);
		return TCL_ERROR;
	    }
	    compDictObj = objv[++i];
	    break;
	}

	if (flush == -2) {
	    Tcl_AppendResult(interp, "\"-flush\", \"-fullflush\" and "
		    "\"-finalize\" options are mutually exclusive", NULL);
	    Tcl_SetErrorCode(interp, "TCL", "ZIP", "EXCLUSIVE", NULL);
	    return TCL_ERROR;
	}
    }
    if (flush == -1) {
	flush = 0;
    }

    /*
     * Set the compression dictionary if requested.
     */

    if (compDictObj != NULL) {
	int len;

	(void) Tcl_GetByteArrayFromObj(compDictObj, &len);
	if (len == 0) {
	    compDictObj = NULL;
	}
	Tcl_ZlibStreamSetCompressionDictionary(zstream, compDictObj);
    }

    /*
     * Send the data to the stream core, along with any flushing directive.
     */

    if (Tcl_ZlibStreamPut(zstream, objv[objc-1], flush) != TCL_OK) {
	return TCL_ERROR;
    }

    /*
     * Get such data out as we can (up to the requested length).
     */

    TclNewObj(obj);
    code = Tcl_ZlibStreamGet(zstream, obj, buffersize);
    if (code == TCL_OK) {
	Tcl_SetObjResult(interp, obj);
    } else {
	TclDecrRefCount(obj);
    }
    return code;
}

static int
ZlibStreamPutCmd(
    ClientData cd,
    Tcl_Interp *interp,
    int objc,
    Tcl_Obj *const objv[])
{
    Tcl_ZlibStream zstream = cd;
    int index, flush = -1, i;
    Tcl_Obj *compDictObj = NULL;
    static const char *const put_options[] = {
	"-dictionary", "-finalize", "-flush", "-fullflush", NULL
    };
    enum putOptions {
	po_dictionary, po_finalize, po_flush, po_fullflush
    };

    for (i=2; i<objc-1; i++) {
	if (Tcl_GetIndexFromObj(interp, objv[i], put_options, "option", 0,
		&index) != TCL_OK) {
	    return TCL_ERROR;
	}

	switch ((enum putOptions) index) {
	case po_flush: /* -flush */
	    if (flush > -1) {
		flush = -2;
	    } else {
		flush = Z_SYNC_FLUSH;
	    }
	    break;
	case po_fullflush: /* -fullflush */
	    if (flush > -1) {
		flush = -2;
	    } else {
		flush = Z_FULL_FLUSH;
	    }
	    break;
	case po_finalize: /* -finalize */
	    if (flush > -1) {
		flush = -2;
	    } else {
		flush = Z_FINISH;
	    }
	    break;
	case po_dictionary:
	    if (i == objc-2) {
		Tcl_AppendResult(interp, "\"-dictionary\" option must be "
			"followed by compression dictionary bytes", NULL);
		Tcl_SetErrorCode(interp, "TCL", "ZIP", "NOVAL", NULL);
		return TCL_ERROR;
	    }
	    compDictObj = objv[++i];
	    break;
	}
	if (flush == -2) {
	    Tcl_AppendResult(interp, "\"-flush\", \"-fullflush\" and "
		    "\"-finalize\" options are mutually exclusive", NULL);
	    Tcl_SetErrorCode(interp, "TCL", "ZIP", "EXCLUSIVE", NULL);
	    return TCL_ERROR;
	}
    }
    if (flush == -1) {
	flush = 0;
    }

    /*
     * Set the compression dictionary if requested.
     */

    if (compDictObj != NULL) {
	int len;

	(void) Tcl_GetByteArrayFromObj(compDictObj, &len);
	if (len == 0) {
	    compDictObj = NULL;
	}
	Tcl_ZlibStreamSetCompressionDictionary(zstream, compDictObj);
    }

    /*
     * Send the data to the stream core, along with any flushing directive.
     */

    return Tcl_ZlibStreamPut(zstream, objv[objc-1], flush);
}

static int
ZlibStreamHeaderCmd(
    ClientData cd,
    Tcl_Interp *interp,
    int objc,
    Tcl_Obj *const objv[])
{
    ZlibStreamHandle *zshPtr = cd;
    Tcl_Obj *resultObj;

    if (objc != 2) {
	Tcl_WrongNumArgs(interp, 2, objv, NULL);
	return TCL_ERROR;
    } else if (zshPtr->mode != TCL_ZLIB_STREAM_INFLATE
	    || zshPtr->format != TCL_ZLIB_FORMAT_GZIP) {
	Tcl_AppendResult(interp,
		"only gunzip streams can produce header information", NULL);
	Tcl_SetErrorCode(interp, "TCL", "ZIP", "BADOP", NULL);
	return TCL_ERROR;
    }

    TclNewObj(resultObj);
    ExtractHeader(&zshPtr->gzHeaderPtr->header, resultObj);
    Tcl_SetObjResult(interp, resultObj);
    return TCL_OK;
}

/*
 *----------------------------------------------------------------------
 *	Set of functions to support channel stacking.
 *----------------------------------------------------------------------
 *
 * ZlibTransformClose --

	do {
	    cd->outStream.next_out = (Bytef *) cd->outBuffer;
	    cd->outStream.avail_out = (unsigned) cd->outAllocated;
	    e = deflate(&cd->outStream, Z_FINISH);
	    if (e != Z_OK && e != Z_STREAM_END) {
		/* TODO: is this the right way to do errors on close? */
		if (!TclInThreadExit()) {
		    ConvertError(interp, e);
		    ConvertError(interp, e, cd->outStream.adler);
		}
		result = TCL_ERROR;
		break;
	    }
	    if (cd->outStream.avail_out != (unsigned) cd->outAllocated) {
		if (Tcl_WriteRaw(cd->parent, cd->outBuffer,
			cd->outAllocated - cd->outStream.avail_out) < 0) {
		    /* TODO: is this the right way to do errors on close?
		     * Note: when close is called from FinalizeIOSubsystem
		     * then interp may be NULL */
		    if (!TclInThreadExit()) {
		    if (!TclInThreadExit() && interp) {
			if (interp) {
			    Tcl_AppendResult(interp,
				    "error while finalizing file: ",
				    Tcl_PosixError(interp), NULL);
			Tcl_AppendResult(interp,
				"error while finalizing file: ",
				Tcl_PosixError(interp), NULL);
			}
		    }
		    result = TCL_ERROR;
		    break;
		}
	    }
	} while (e != Z_STREAM_END);
	e = deflateEnd(&cd->outStream);

	 * Length (cd->decompressed) == 0, toRead > 0 here.
	 *
	 * The zlib transform allows us to read at most one character from the
	 * underlying channel to properly identify Z_STREAM_END without
	 * reading over the border.
	 */

	readBytes = Tcl_ReadRaw(cd->parent, cd->inBuffer, 1);
	readBytes = Tcl_ReadRaw(cd->parent, cd->inBuffer, cd->readAheadLimit);

	/*
	 * Three cases here:
	 *  1.	Got some data from the underlying channel (readBytes > 0) so
	 *	it should be fed through the decompression engine.
	 *  2.	Got an error (readBytes < 0) which we should report up except
	 *	for the case where we can convert it to a short read.

    int toWrite,
    int *errorCodePtr)
{
    ZlibChannelData *cd = instanceData;
    Tcl_DriverOutputProc *outProc =
	    Tcl_ChannelOutputProc(Tcl_GetChannelType(cd->parent));
    int e, produced;
    Tcl_Obj *errObj;

    if (cd->mode == TCL_ZLIB_STREAM_INFLATE) {
	return outProc(Tcl_GetChannelInstanceData(cd->parent), buf, toWrite,
		errorCodePtr);
    }

    cd->outStream.next_in = (Bytef *) buf;

	    if (Tcl_WriteRaw(cd->parent, cd->outBuffer, produced) < 0) {
		*errorCodePtr = Tcl_GetErrno();
		return -1;
	    }
	}
    } while (e == Z_OK && produced > 0 && cd->outStream.avail_in > 0);

    if (e != Z_OK) {
	Tcl_SetChannelError(cd->parent,
		Tcl_NewStringObj(cd->outStream.msg, -1));
	*errorCodePtr = EINVAL;
	return -1;
    if (e == Z_OK) {
	return toWrite - cd->outStream.avail_in;
    }

    errObj = Tcl_NewListObj(0, NULL);
    Tcl_ListObjAppendElement(NULL, errObj, Tcl_NewStringObj("-errorcode",-1));
    Tcl_ListObjAppendElement(NULL, errObj,
	    ConvertErrorToList(e, cd->outStream.adler));
    Tcl_ListObjAppendElement(NULL, errObj,
	    Tcl_NewStringObj(cd->outStream.msg, -1));
    Tcl_SetChannelError(cd->parent, errObj);
    *errorCodePtr = EINVAL;
    return -1;
    }

    return toWrite - cd->outStream.avail_in;
}

/*
 *----------------------------------------------------------------------
 *
 * ZlibTransformSetOption --
 *

    Tcl_Interp *interp,
    const char *optionName,
    const char *value)
{
    ZlibChannelData *cd = instanceData;
    Tcl_DriverSetOptionProc *setOptionProc =
	    Tcl_ChannelSetOptionProc(Tcl_GetChannelType(cd->parent));
    static const char *compressChanOptions = "dictionary flush";
    static const char *chanOptions = "flush";
    static const char *gzipChanOptions = "flush";
    static const char *decompressChanOptions = "dictionary limit";
    static const char *gunzipChanOptions = "flush limit";
    int haveFlushOpt = (cd->mode == TCL_ZLIB_STREAM_DEFLATE);

    if (haveFlushOpt && optionName && strcmp(optionName, "-flush") == 0) {
    if (optionName && (strcmp(optionName, "-dictionary") == 0)
	int flushType;

	    && (cd->format != TCL_ZLIB_FORMAT_GZIP)) {
	if (value[0] == 'f' && strcmp(value, "full") == 0) {
	    flushType = Z_FULL_FLUSH;
	} else if (value[0] == 's' && strcmp(value, "sync") == 0) {
	    flushType = Z_SYNC_FLUSH;
	} else {
	    Tcl_AppendResult(interp, "unknown -flush type \"", value,
		    "\": must be full or sync", NULL);
	Tcl_Obj *compDictObj;
	int code;
	    Tcl_SetErrorCode(interp, "TCL", "VALUE", "FLUSH", NULL);
	    return TCL_ERROR;
	}


	TclNewStringObj(compDictObj, value, strlen(value));
	/*
	 * Try to actually do the flush now.
	 */

	cd->outStream.avail_in = 0;
	Tcl_IncrRefCount(compDictObj);
	(void) Tcl_GetByteArrayFromObj(compDictObj, NULL);
	if (cd->compDictObj) {
	while (1) {
	    int e;

	    cd->outStream.next_out = (Bytef *) cd->outBuffer;
	    cd->outStream.avail_out = cd->outAllocated;

	    e = deflate(&cd->outStream, flushType);
	    TclDecrRefCount(cd->compDictObj);
	}
	cd->compDictObj = compDictObj;
	code = Z_OK;
	if (cd->mode == TCL_ZLIB_STREAM_DEFLATE) {
	    code = SetDeflateDictionary(&cd->outStream, compDictObj);
	    if (e == Z_BUF_ERROR) {
		break;
	    } else if (e != Z_OK) {
		ConvertError(interp, e);
	    if (code != Z_OK) {
		ConvertError(interp, code, cd->outStream.adler);
		return TCL_ERROR;
	    } else if (cd->outStream.avail_out == 0) {
		break;
	    }

	    if (Tcl_WriteRaw(cd->parent, cd->outBuffer,
	} else if (cd->format == TCL_ZLIB_FORMAT_RAW) {
	    code = SetInflateDictionary(&cd->inStream, compDictObj);
	    if (code != Z_OK) {
		    cd->outStream.next_out - (Bytef *) cd->outBuffer) < 0) {
		Tcl_AppendResult(interp, "problem flushing channel: ",
			Tcl_PosixError(interp), NULL);
		ConvertError(interp, code, cd->inStream.adler);
		return TCL_ERROR;
	    }
	}
	return TCL_OK;
    }

    if (haveFlushOpt) {
	if (optionName && strcmp(optionName, "-flush") == 0) {
	    int flushType;

	    if (value[0] == 'f' && strcmp(value, "full") == 0) {
		flushType = Z_FULL_FLUSH;
	    } else if (value[0] == 's' && strcmp(value, "sync") == 0) {
		flushType = Z_SYNC_FLUSH;
	    } else {
		Tcl_AppendResult(interp, "unknown -flush type \"", value,
			"\": must be full or sync", NULL);
		Tcl_SetErrorCode(interp, "TCL", "VALUE", "FLUSH", NULL);
		return TCL_ERROR;
	    }

	    /*
	     * Try to actually do the flush now.
	     */

	    cd->outStream.avail_in = 0;
	    while (1) {
		int e;

		cd->outStream.next_out = (Bytef *) cd->outBuffer;
		cd->outStream.avail_out = cd->outAllocated;

		e = deflate(&cd->outStream, flushType);
		if (e == Z_BUF_ERROR) {
		    break;
		} else if (e != Z_OK) {
		    ConvertError(interp, e, cd->outStream.adler);
		    return TCL_ERROR;
		} else if (cd->outStream.avail_out == 0) {
		    break;
		}

		if (Tcl_WriteRaw(cd->parent, cd->outBuffer,
			cd->outStream.next_out - (Bytef *) cd->outBuffer)<0) {
		    Tcl_AppendResult(interp, "problem flushing channel: ",
			    Tcl_PosixError(interp), NULL);
		    return TCL_ERROR;
		}
	    }
	    return TCL_OK;
	}
    } else {
	if (optionName && strcmp(optionName, "-limit") == 0) {
	    int newLimit;

	    if (Tcl_GetInt(interp, value, &newLimit) != TCL_OK) {
		return TCL_ERROR;
	    } else if (newLimit < 1 || newLimit > 65535) {
		Tcl_AppendResult(interp, "-limit must be between 1 and 65535",
			NULL);
		Tcl_SetErrorCode(interp, "TCL", "VALUE", "READLIMIT", NULL);
		return TCL_ERROR;
	    }
	}
    }

    if (setOptionProc == NULL) {
	if (cd->format == TCL_ZLIB_FORMAT_GZIP) {
	return Tcl_BadChannelOption(interp, optionName, chanOptions);
	    return Tcl_BadChannelOption(interp, optionName,
		    (cd->mode == TCL_ZLIB_STREAM_DEFLATE)
		    ? gzipChanOptions : gunzipChanOptions);
	} else {
	    return Tcl_BadChannelOption(interp, optionName,
		    (cd->mode == TCL_ZLIB_STREAM_DEFLATE)
		    ? compressChanOptions : decompressChanOptions);
	}
    }

    /*
     * Pass all unknown options down, to deeper transforms and/or the base
     * channel.
     */

    Tcl_Interp *interp,
    const char *optionName,
    Tcl_DString *dsPtr)
{
    ZlibChannelData *cd = instanceData;
    Tcl_DriverGetOptionProc *getOptionProc =
	    Tcl_ChannelGetOptionProc(Tcl_GetChannelType(cd->parent));
    static const char *compressChanOptions = "checksum dictionary";
    static const char *gzipChanOptions = "checksum";
    static const char *decompressChanOptions = "checksum dictionary limit";
    static const char *chanOptions = "checksum header";
    static const char *gunzipChanOptions = "checksum header limit";

    /*
     * The "crc" option reports the current CRC (calculated with the Adler32
     * or CRC32 algorithm according to the format) given the data that has
     * been processed so far.
     */

	    Tcl_DStringAppendElement(dsPtr, "-checksum");
	    Tcl_DStringAppendElement(dsPtr, buf);
	} else {
	    Tcl_DStringAppend(dsPtr, buf, -1);
	    return TCL_OK;
	}
    }

    if ((cd->format != TCL_ZLIB_FORMAT_GZIP) &&
	    (optionName == NULL || strcmp(optionName, "-dictionary") == 0)) {
	/*
	 * Embedded NUL bytes are ok; they'll be C080-encoded.
	 */

	if (optionName == NULL) {
	    Tcl_DStringAppendElement(dsPtr, "-dictionary");
	    if (cd->compDictObj) {
		Tcl_DStringAppendElement(dsPtr,
			Tcl_GetString(cd->compDictObj));
	    } else {
		Tcl_DStringAppendElement(dsPtr, "");
	    }
	} else {
	    int len;
	    const char *str = Tcl_GetStringFromObj(cd->compDictObj, &len);

	    Tcl_DStringAppend(dsPtr, str, len);
	}
    }

    /*
     * The "header" option, which is only valid on inflating gzip channels,
     * reports the header that has been read from the start of the stream.
     */

    if ((cd->flags & IN_HEADER) && ((optionName == NULL) ||

    if (getOptionProc) {
	return getOptionProc(Tcl_GetChannelInstanceData(cd->parent),
		interp, optionName, dsPtr);
    }
    if (optionName == NULL) {
	return TCL_OK;
    }
    if (cd->format == TCL_ZLIB_FORMAT_GZIP) {
    return Tcl_BadChannelOption(interp, optionName, chanOptions);
	return Tcl_BadChannelOption(interp, optionName,
		(cd->mode == TCL_ZLIB_STREAM_DEFLATE)
		? gzipChanOptions : gunzipChanOptions);
    } else {
	return Tcl_BadChannelOption(interp, optionName,
		(cd->mode == TCL_ZLIB_STREAM_DEFLATE)
		? compressChanOptions : decompressChanOptions);
    }
}

/*
 *----------------------------------------------------------------------
 *
 * ZlibTransformWatch, ZlibTransformEventHandler --
 *

    int format,			/* One of the TCL_ZLIB_FORMAT_* values that
				 * indicates what compressed format to allow.
				 * TCL_ZLIB_FORMAT_AUTO is only supported for
				 * decompressing transforms. */
    int level,			/* What compression level to use. Ignored for
				 * decompressing transforms. */
    Tcl_Channel channel,	/* The channel to attach to. */
    Tcl_Obj *gzipHeaderDictPtr)	/* A description of header to use, or NULL to
    Tcl_Obj *gzipHeaderDictPtr,	/* A description of header to use, or NULL to
				 * use a default. Ignored if not compressing
				 * to produce gzip-format data. */
    Tcl_Obj *compDictObj)	/* Byte-array object containing compression
				 * dictionary (not dictObj!) to use if
				 * necessary. */
{
    ZlibChannelData *cd = ckalloc(sizeof(ZlibChannelData));
    Tcl_Channel chan;
    int wbits = 0;
    int e;

    if (mode != TCL_ZLIB_STREAM_DEFLATE && mode != TCL_ZLIB_STREAM_INFLATE) {
	Tcl_Panic("unknown mode: %d", mode);
    }

    memset(cd, 0, sizeof(ZlibChannelData));
    cd->mode = mode;
    cd->format = format;
    cd->readAheadLimit = 1;

    if (format == TCL_ZLIB_FORMAT_GZIP || format == TCL_ZLIB_FORMAT_AUTO) {
	if (mode == TCL_ZLIB_STREAM_DEFLATE) {
	    if (gzipHeaderDictPtr) {
		int dummy = 0;

		cd->flags |= OUT_HEADER;
		if (GenerateHeader(interp, gzipHeaderDictPtr, &cd->outHeader,
			&dummy) != TCL_OK) {
			NULL) != TCL_OK) {
		    goto error;
		}
	    }
	} else {
	    cd->flags |= IN_HEADER;
	    cd->inHeader.header.name = (Bytef *)
		    &cd->inHeader.nativeFilenameBuf;
	    cd->inHeader.header.name_max = MAXPATHLEN - 1;
	    cd->inHeader.header.comment = (Bytef *)
		    &cd->inHeader.nativeCommentBuf;
	    cd->inHeader.header.comm_max = MAX_COMMENT_LEN - 1;
	}
    }

    if (compDictObj != NULL) {
	cd->compDictObj = Tcl_DuplicateObj(compDictObj);
	Tcl_IncrRefCount(cd->compDictObj);
	Tcl_GetByteArrayFromObj(cd->compDictObj, NULL);
    }

    if (format == TCL_ZLIB_FORMAT_RAW) {
	wbits = WBITS_RAW;
    } else if (format == TCL_ZLIB_FORMAT_ZLIB) {
	wbits = WBITS_ZLIB;
    } else if (format == TCL_ZLIB_FORMAT_GZIP) {
	wbits = WBITS_GZIP;

	cd->inBuffer = ckalloc(cd->inAllocated);
	if (cd->flags & IN_HEADER) {
	    e = inflateGetHeader(&cd->inStream, &cd->inHeader.header);
	    if (e != Z_OK) {
		goto error;
	    }
	}
	if (cd->format == TCL_ZLIB_FORMAT_RAW && cd->compDictObj) {
	    e = SetInflateDictionary(&cd->inStream, cd->compDictObj);
	    if (e != Z_OK) {
		goto error;
	    }
	    TclDecrRefCount(cd->compDictObj);
	    cd->compDictObj = NULL;
	}
    } else {
	e = deflateInit2(&cd->outStream, level, Z_DEFLATED, wbits,
		MAX_MEM_LEVEL, Z_DEFAULT_STRATEGY);
	if (e != Z_OK) {
	    goto error;
	}
	cd->outAllocated = DEFAULT_BUFFER_SIZE;
	cd->outBuffer = ckalloc(cd->outAllocated);
	if (cd->flags & OUT_HEADER) {
	    e = deflateSetHeader(&cd->outStream, &cd->outHeader.header);
	    if (e != Z_OK) {
		goto error;
	    }
	}
	if (cd->compDictObj) {
	    e = SetDeflateDictionary(&cd->outStream, cd->compDictObj);
	    if (e != Z_OK) {
		goto error;
	    }
	}
    }

    Tcl_DStringInit(&cd->decompressed);

    chan = Tcl_StackChannel(interp, &zlibChannelType, cd,
	    Tcl_GetChannelMode(channel), channel);

	ckfree(cd->inBuffer);
	inflateEnd(&cd->inStream);
    }
    if (cd->outBuffer) {
	ckfree(cd->outBuffer);
	deflateEnd(&cd->outStream);
    }
    if (cd->compDictObj) {
	Tcl_DecrRefCount(cd->compDictObj);
    }
    ckfree(cd);
    return NULL;
}

/*
 *----------------------------------------------------------------------
 *

    int n,
    int flush,
    int *errorCodePtr)
{
#define MAXBUF	1024
    unsigned char buf[MAXBUF];
    int e, written;
    Tcl_Obj *errObj;

    cd->inStream.next_in = (Bytef *) cd->inBuffer;
    cd->inStream.avail_in = n;

    while (1) {
	cd->inStream.next_out = (Bytef *) buf;
	cd->inStream.avail_out = MAXBUF;

	e = inflate(&cd->inStream, flush);
	if (e == Z_NEED_DICT && cd->compDictObj) {
	    e = SetInflateDictionary(&cd->inStream, cd->compDictObj);
	    if (e == Z_OK) {
		/*
		 * A repetition of Z_NEED_DICT is just an error.
		 */

		cd->inStream.next_out = (Bytef *) buf;
		cd->inStream.avail_out = MAXBUF;
		e = inflate(&cd->inStream, flush);
	    }
	}

	/*
	 * avail_out is now the left over space in the output.  Therefore
	 * "MAXBUF - avail_out" is the amount of bytes generated.
	 */

	written = MAXBUF - cd->inStream.avail_out;

	 * Just indicates that the zlib couldn't consume input/produce output,
	 * and is fixed by supplying more input.
	 *
	 * Otherwise, we've got errors and need to report to higher-up.
	 */

	if ((e != Z_OK) && (e != Z_BUF_ERROR)) {
	    Tcl_Obj *errObj = Tcl_NewListObj(0, NULL);

	    goto handleError;
	    Tcl_ListObjAppendElement(NULL, errObj,
		    Tcl_NewStringObj(cd->inStream.msg, -1));
	    Tcl_SetChannelError(cd->parent, errObj);
	    *errorCodePtr = EINVAL;
	    return TCL_ERROR;
	}

	/*
	 * Check if the inflate stopped early.
	 */

	if (cd->inStream.avail_in <= 0 && flush != Z_SYNC_FLUSH) {
	    return TCL_OK;
	}
    }

  handleError:
    errObj = Tcl_NewListObj(0, NULL);
    Tcl_ListObjAppendElement(NULL, errObj, Tcl_NewStringObj("-errorcode",-1));
    Tcl_ListObjAppendElement(NULL, errObj,
	    ConvertErrorToList(e, cd->inStream.adler));
    Tcl_ListObjAppendElement(NULL, errObj,
	    Tcl_NewStringObj(cd->inStream.msg, -1));
    Tcl_SetChannelError(cd->parent, errObj);
    *errorCodePtr = EINVAL;
    return TCL_ERROR;
}

/*
 *----------------------------------------------------------------------
 *	Finally, the TclZlibInit function. Used to install the zlib API.
 *----------------------------------------------------------------------
 */

int
TclZlibInit(
    Tcl_Interp *interp)
{
    Tcl_Config cfg[2];

    /*
     * This does two things. It creates a counter used in the creation of
     * stream commands, and it creates the namespace that will contain those
     * commands.
     */

    Tcl_Eval(interp, "namespace eval ::tcl::zlib {variable cmdcounter 0}");

    /*
     * Create the public scripted interface to this file's functionality.
     */

    Tcl_CreateObjCommand(interp, "zlib", ZlibCmd, 0, 0);

    /*
     * Store the underlying configuration information.
     *
     * TODO: Describe whether we're using the system version of the library or
     * a compatibility version built into Tcl?
     */

    cfg[0].key = "zlibVersion";
    cfg[0].value = zlibVersion();
    cfg[1].key = NULL;
    Tcl_RegisterConfig(interp, "zlib", cfg, "ascii");

    /*
     * Formally provide the package as a Tcl built-in.
     */

    return Tcl_PkgProvide(interp, "zlib", TCL_ZLIB_VERSION);
}

/*
 *----------------------------------------------------------------------
 *	Stubs used when a suitable zlib installation was not found during
 *	configure.

Tcl_ZlibAdler32(
    unsigned int adler,
    const char *buf,
    int len)
{
    return 0;
}

int
Tcl_ZlibStreamSetCompressionDictionary(
    Tcl_Interp *interp,
    Tcl_ZlibStream zhandle,
    Tcl_Obj *compressionDictionaryObj)
{
    Tcl_SetResult(interp, "unimplemented", TCL_STATIC);
    Tcl_SetErrorCode(interp, "TCL", "UNIMPLEMENTED", NULL);
    return TCL_ERROR;
}
#endif /* HAVE_ZLIB */

/*
 * Local Variables:
 * mode: c
 * c-basic-offset: 4
 * fill-column: 78
 * End:
 */

# The file tests the tclZlib.c file.
#
# This file contains a collection of tests for one or more of the Tcl built-in
# commands. Sourcing this file into Tcl runs the tests and generates output
# for errors. No output means no errors were found.
#
# Copyright (c) 1996-1998 by Sun Microsystems, Inc.
# Copyright (c) 1998-1999 by Scriptics Corporation.
#
# See the file "license.terms" for information on usage and redistribution of
# this file, and for a DISCLAIMER OF ALL WARRANTIES.

if {[lsearch [namespace children] ::tcltest] == -1} {
if {"::tcltest" ni [namespace children]} {
    package require tcltest 2.1
    namespace import -force ::tcltest::*
}

testConstraint zlib [llength [info commands zlib]]

test zlib-1.1 {zlib basics} -constraints zlib -returnCodes error -body {
    zlib
} -result {wrong # args: should be "zlib command arg ?...?"}
test zlib-1.2 {zlib basics} -constraints zlib -returnCodes error -body {
    zlib ? {}
} -result {bad command "?": must be adler32, compress, crc32, decompress, deflate, gunzip, gzip, inflate, push, or stream}
test zlib-1.3 {zlib basics} -constraints zlib -body {
    zlib::pkgconfig list
} -result zlibVersion
test zlib-1.4 {zlib basics} -constraints zlib -body {
    package present zlib
} -result 2.0

test zlib-2.1 {zlib compress/decompress} zlib {
    zlib decompress [zlib compress abcdefghijklm]
} abcdefghijklm

test zlib-3.1 {zlib deflate/inflate} zlib {
    zlib inflate [zlib deflate abcdefghijklm]

test zlib-7.0 {zlib stream} -constraints zlib -returnCodes error -setup {
    set s [zlib stream compress]
} -body {
    $s ?
} -cleanup {
    $s close
} -result {bad option "?": must be add, checksum, close, eof, finalize, flush, fullflush, get, put, or reset}
} -result {bad option "?": must be add, checksum, close, eof, finalize, flush, fullflush, get, header, put, or reset}
test zlib-7.1 {zlib stream} zlib {
    set s [zlib stream compress]
    $s put -finalize abcdeEDCBA
    set data [$s get]
    set result [list [$s get] [format %x [$s checksum]]]
    $s close
    lappend result [zlib decompress $data]

    fileevent $r readable {set msg [read $r];lappend ::res $msg;if {[eof $r]} {set ::done 1}}
    after 250 {lappend ::res MIDDLE}
    vwait ::done
    set ::res
} -cleanup {
    catch {close $r}
} -result {qwertyuiop MIDDLE asdfghjkl}
test zlib-8.6 {transformation and fconfigure} -setup {
    set file [makeFile {} test.z]
    set fd [open $file wb]
} -constraints zlib -body {
    list [fconfigure $fd] [zlib push compress $fd; fconfigure $fd] \
	[chan pop $fd; fconfigure $fd]
} -cleanup {
    catch {close $fd}
    removeFile $file
} -result {{-blocking 1 -buffering full -buffersize 4096 -encoding binary -eofchar {} -translation lf} {-blocking 1 -buffering full -buffersize 4096 -encoding binary -eofchar {} -translation lf -checksum 1 -dictionary {}} {-blocking 1 -buffering full -buffersize 4096 -encoding binary -eofchar {} -translation lf}}
test zlib-8.7 {transformation and fconfigure} -setup {
    set file [makeFile {} test.gz]
    set fd [open $file wb]
} -constraints zlib -body {
    list [fconfigure $fd] [zlib push gzip $fd; fconfigure $fd] \
	[chan pop $fd; fconfigure $fd]
} -cleanup {
    catch {close $fd}
    removeFile $file
} -result {{-blocking 1 -buffering full -buffersize 4096 -encoding binary -eofchar {} -translation lf} {-blocking 1 -buffering full -buffersize 4096 -encoding binary -eofchar {} -translation lf -checksum 0} {-blocking 1 -buffering full -buffersize 4096 -encoding binary -eofchar {} -translation lf}}
# Input is headers from fetching SPDY draft
# Dictionary is that which is proposed _in_ SPDY draft
set spdyHeaders "HTTP/1.0 200 OK\r\nContent-Type: text/html; charset=utf-8\r\nX-Robots-Tag: noarchive\r\nLast-Modified: Tue, 05 Jun 2012 02:43:25 GMT\r\nETag: \"1338864205129|#public|0|en|||0\"\r\nExpires: Tue, 05 Jun 2012 16:17:11 GMT\r\nDate: Tue, 05 Jun 2012 16:17:06 GMT\r\nCache-Control: public, max-age=5\r\nX-Content-Type-Options: nosniff\r\nX-XSS-Protection: 1; mode=block\r\nServer: GSE\r\n"
set spdyDict "optionsgetheadpostputdeletetraceacceptaccept-charsetaccept-encodingaccept-languageauthorizationexpectfromhostif-modified-sinceif-matchif-none-matchif-rangeif-unmodifiedsincemax-forwardsproxy-authorizationrangerefererteuser-agent100101200201202203204205206300301302303304305306307400401402403404405406407408409410411412413414415416417500501502503504505accept-rangesageetaglocationproxy-authenticatepublicretry-afterservervarywarningwww-authenticateallowcontent-basecontent-encodingcache-controlconnectiondatetrailertransfer-encodingupgradeviawarningcontent-languagecontent-lengthcontent-locationcontent-md5content-rangecontent-typeetagexpireslast-modifiedset-cookieMondayTuesdayWednesdayThursdayFridaySaturdaySundayJanFebMarAprMayJunJulAugSepOctNovDecchunkedtext/htmlimage/pngimage/jpgimage/gifapplication/xmlapplication/xhtmltext/plainpublicmax-agecharset=iso-8859-1utf-8gzipdeflateHTTP/1.1statusversionurl"
test zlib-8.8 {transformtion and fconfigure} -setup {
    lassign [chan pipe] inSide outSide
} -constraints zlib -body {
    zlib push compress $outSide -dictionary $spdyDict
    fconfigure $outSide -blocking 0 -translation binary -buffering none
    fconfigure $inSide -blocking 0 -translation binary
    puts -nonewline $outSide $spdyHeaders
    chan pop $outSide
    set compressed [read $inSide]
    catch {zlib decompress $compressed} err opt
    list [string length [zlib compress $spdyHeaders]] \
	[string length $compressed] \
	$err [dict get $opt -errorcode] [zlib adler32 $spdyDict]
} -cleanup {
    catch {close $outSide}
    catch {close $inSide}
} -result {260 222 {need dictionary} {TCL ZLIB NEED_DICT 2381337010} 2381337010}
test zlib-8.9 {transformtion and fconfigure} -setup {
    lassign [chan pipe] inSide outSide
    set strm [zlib stream decompress]
} -constraints zlib -body {
    zlib push compress $outSide -dictionary $spdyDict
    fconfigure $outSide -blocking 0 -translation binary -buffering none
    fconfigure $inSide -blocking 0 -translation binary
    puts -nonewline $outSide $spdyHeaders
    set result [fconfigure $outSide -checksum]
    chan pop $outSide
    $strm put -dictionary $spdyDict [read $inSide]
    lappend result [string length $spdyHeaders] [string length [$strm get]]
} -cleanup {
    catch {close $outSide}
    catch {close $inSide}
    catch {$strm close}
} -result {3064818174 358 358}
test zlib-8.10 {transformtion and fconfigure} -setup {
    lassign [chan pipe] inSide outSide
} -constraints zlib -body {
    zlib push deflate $outSide -dictionary $spdyDict
    fconfigure $outSide -blocking 0 -translation binary -buffering none
    fconfigure $inSide -blocking 0 -translation binary
    puts -nonewline $outSide $spdyHeaders
    chan pop $outSide
    set compressed [read $inSide]
    catch {zlib inflate $compressed} err opt
    list [string length [zlib deflate $spdyHeaders]] \
	[string length $compressed] \
	$err [dict get $opt -errorcode]
} -cleanup {
    catch {close $outSide}
    catch {close $inSide}
} -result {254 212 {data error} {TCL ZLIB DATA}}
test zlib-8.11 {transformtion and fconfigure} -setup {
    lassign [chan pipe] inSide outSide
    set strm [zlib stream inflate]
} -constraints zlib -body {
    zlib push deflate $outSide -dictionary $spdyDict
    fconfigure $outSide -blocking 0 -translation binary -buffering none
    fconfigure $inSide -blocking 0 -translation binary
    puts -nonewline $outSide $spdyHeaders
    chan pop $outSide
    $strm put -dictionary $spdyDict [read $inSide]
    list [string length $spdyHeaders] [string length [$strm get]]
} -cleanup {
    catch {close $outSide}
    catch {close $inSide}
    catch {$strm close}
} -result {358 358}
test zlib-8.12 {transformtion and fconfigure} -setup {
    lassign [chan pipe] inSide outSide
    set strm [zlib stream compress]
} -constraints zlib -body {
    $strm put -dictionary $spdyDict -finalize $spdyHeaders
    zlib push decompress $inSide
    fconfigure $outSide -blocking 0 -translation binary
    fconfigure $inSide -translation binary -dictionary $spdyDict
    puts -nonewline $outSide [$strm get]
    close $outSide
    list [string length $spdyHeaders] [string length [read $inSide]] \
	[fconfigure $inSide -checksum]
} -cleanup {
    catch {close $outSide}
    catch {close $inSide}
    catch {$strm close}
} -result {358 358 3064818174}
test zlib-8.13 {transformtion and fconfigure} -setup {
    lassign [chan pipe] inSide outSide
    set strm [zlib stream compress]
} -constraints zlib -body {
    $strm put -dictionary $spdyDict -finalize $spdyHeaders
    zlib push decompress $inSide -dictionary $spdyDict
    fconfigure $outSide -blocking 0 -translation binary
    fconfigure $inSide -translation binary
    puts -nonewline $outSide [$strm get]
    close $outSide
    list [string length $spdyHeaders] [string length [read $inSide]] \
	[fconfigure $inSide -checksum]
} -cleanup {
    catch {close $outSide}
    catch {close $inSide}
    catch {$strm close}
} -result {358 358 3064818174}
test zlib-8.14 {transformtion and fconfigure} -setup {
    lassign [chan pipe] inSide outSide
    set strm [zlib stream deflate]
} -constraints zlib -body {
    $strm put -finalize -dictionary $spdyDict $spdyHeaders
    zlib push inflate $inSide
    fconfigure $outSide -blocking 0 -buffering none -translation binary
    fconfigure $inSide -translation binary -dictionary $spdyDict
    puts -nonewline $outSide [$strm get]
    close $outSide
    list [string length $spdyHeaders] [string length [read $inSide]]
} -cleanup {
    catch {close $outSide}
    catch {close $inSide}
    catch {$strm close}
} -result {358 358}
test zlib-8.15 {transformtion and fconfigure} -setup {
    lassign [chan pipe] inSide outSide
    set strm [zlib stream deflate]
} -constraints zlib -body {
    $strm put -finalize -dictionary $spdyDict $spdyHeaders
    zlib push inflate $inSide -dictionary $spdyDict
    fconfigure $outSide -blocking 0 -buffering none -translation binary
    fconfigure $inSide -translation binary
    puts -nonewline $outSide [$strm get]
    close $outSide
    list [string length $spdyHeaders] [string length [read $inSide]]
} -cleanup {
    catch {close $outSide}
    catch {close $inSide}
    catch {$strm close}
} -result {358 358}

test zlib-9.1 "check fcopy with push" -constraints zlib -setup {
    set sfile [makeFile {} testsrc.gz]
    set file [makeFile {} test.gz]
    set f [open $sfile wb]
    puts -nonewline $f [zlib gzip [string repeat a 81920]]
    close $f