# ifndef NDEBUG
#  define ENABLE_LIST_ASSERTS /* Always activate list asserts in debug mode */
# endif
#endif

#ifdef ENABLE_LIST_ASSERTS

#define LIST_ASSERT(cond_) assert(cond_) /* TODO - is there a Tcl-specific one? */
/*
 * LIST_INDEX_ASSERT is to catch errors with negative indices and counts
 * being passed AFTER validation. On Tcl9 length types are unsigned hence
 * the checks against LIST_MAX. On Tcl8 length types are signed hence the
 * also checks against 0.
 */
#define LIST_INDEX_ASSERT(idxarg_)                                 \

#define LIST_INDEX_ASSERT(idx_) ((void) 0)
#define LIST_COUNT_ASSERT(count_) ((void) 0)

#endif

/* Checks for when caller should have already converted to internal list type */
#define LIST_ASSERT_TYPE(listObj_) \
    LIST_ASSERT((listObj_)->typePtr == &tclListType.objType);


/*
 * If ENABLE_LIST_INVARIANTS is enabled (-DENABLE_LIST_INVARIANTS from the
 * command line), the entire list internal representation is checked for
 * inconsistencies. This has a non-trivial cost so has to be separately
 * enabled and not part of assertions checking. However, the test suite does
 * invoke ListRepValidate directly even without ENABLE_LIST_INVARIANTS.

static inline int
ListSpanMerited(
    Tcl_Size length,                 /* Length of the proposed span */
    Tcl_Size usedStorageLength,      /* Number of slots currently in used */
    Tcl_Size allocatedStorageLength) /* Length of the currently allocation */
{
    /*
     TODO

     - heuristics thresholds need to be determined
     - currently, information about the sharing (ref count) of existing
       storage is not passed. Perhaps it should be. For example if the
       existing storage has a "large" ref count, then it might make sense
       to do even a small span.
     */

    if (length < LIST_SPAN_THRESHOLD) {
	return 0;/* No span for small lists */
    }
    if (length < (allocatedStorageLength / 2 - allocatedStorageLength / 8)) {
	return 0; /* No span if less than 3/8 of allocation */

	if (flags & LISTREP_PANIC_ON_FAIL) {
	    Tcl_Panic("max length of a Tcl list exceeded");
	}
	return NULL;
    }

    if (flags & LISTREP_SPACE_FLAGS) {

	capacity = ListStoreUpSize(objc);
    } else {
	capacity = objc;
    }

    storePtr = (ListStore *)Tcl_AttemptAlloc(LIST_SIZE(capacity));
    if (storePtr == NULL && capacity != objc) {

	capacity = objc; /* Try allocating exact size */
	storePtr = (ListStore *)Tcl_AttemptAlloc(LIST_SIZE(capacity));
    }
    if (storePtr == NULL) {
	if (flags & LISTREP_PANIC_ON_FAIL) {
	    Tcl_Panic("list creation failed: unable to alloc %" TCL_Z_MODIFIER "u bytes",
		    LIST_SIZE(objc));
	}

}

/*
 *------------------------------------------------------------------------
 *
 * ListStoreReallocate --
 *
 *    Reallocates the memory for a ListStore.

 *
 * Results:
 *    Pointer to the ListStore which may be the same as storePtr or pointer
 *    to a new block of memory. On reallocation failure, NULL is returned.
 *
 *
 * Side effects:

	(ListStore *)Tcl_AttemptRealloc(storePtr, LIST_SIZE(newCapacity));

    /*
     * In case above failed keep looping reducing the requested extra space
     * by half every time.
     */
    while (newStorePtr == NULL && (newCapacity > (numSlots+1))) {
	/* Because of loop condition newCapacity can't overflow */
	newCapacity = numSlots + ((newCapacity - numSlots) / 2);
	newStorePtr =
	    (ListStore *)Tcl_AttemptRealloc(storePtr, LIST_SIZE(newCapacity));
    }
    if (newStorePtr == NULL) {
	/* Last resort - allcate what was asked */
	newCapacity = numSlots;

 *
 *----------------------------------------------------------------------
 */
int
Tcl_ListObjIndex(
    Tcl_Interp *interp,  /* Used to report errors if not NULL. */
    Tcl_Obj *listObj,    /* List object to index into. */
    Tcl_Size index,           /* Index of element to return. */
    Tcl_Obj **objPtrPtr) /* The resulting Tcl_Obj* is stored here. */
{
    Tcl_Obj **elemObjs;
    Tcl_Size numElems;



    /*
     * TODO

     * Unlike the original list code, this does not optimize for lindex'ing
     * an empty string when the internal rep is not already a list. On the
     * other hand, this code will be faster for the case where the object
     * is currently a dict. Benchmark the two cases.
     */
    if (TclListObjGetElementsM(interp, listObj, &numElems, &elemObjs)
	!= TCL_OK) {
	return TCL_ERROR;
    }
    if (index < 0 || index >= numElems) {
	*objPtrPtr = NULL;
    } else {

int
Tcl_ListObjLength(
    Tcl_Interp *interp,	/* Used to report errors if not NULL. */
    Tcl_Obj *listObj,	/* List object whose #elements to return. */
    Tcl_Size *lenPtr)	/* The resulting length is stored here. */
{
    ListRep listRep;







    Tcl_Size (*lengthProc)(Tcl_Obj *obj) =  ABSTRACTLIST_PROC(listObj, lengthProc);
    if (lengthProc) {
	*lenPtr = lengthProc(listObj);
	return TCL_OK;
    }

    /*
     * TODO
     * Unlike the original list code, this does not optimize for lindex'ing
     * an empty string when the internal rep is not already a list. On the
     * other hand, this code will be faster for the case where the object
     * is currently a dict. Benchmark the two cases.
     */
    if (TclListObjGetRep(interp, listObj, &listRep) != TCL_OK) {
	return TCL_ERROR;
    }
    *lenPtr = ListRepLength(&listRep);
    return TCL_OK;
}

    Tcl_Size first,		/* Index of first element to replace. */
    Tcl_Size numToDelete,	/* Number of elements to replace. */
    Tcl_Size numToInsert,	/* Number of objects to insert. */
    Tcl_Obj *const insertObjs[])/* Tcl objects to insert */
{
    ListRep listRep;
    Tcl_Size origListLen;
    ptrdiff_t lenChange;
    ptrdiff_t leadSegmentLen;
    ptrdiff_t tailSegmentLen;
    Tcl_Size numFreeSlots;
    ptrdiff_t leadShift;
    ptrdiff_t tailShift;
    Tcl_Obj **listObjs;
    int favor;

    if (Tcl_IsShared(listObj)) {
	Tcl_Panic("%s called with shared object", "Tcl_ListObjReplace");
    }

    if (TclListObjGetRep(interp, listObj, &listRep) != TCL_OK)
	return TCL_ERROR; /* Cannot be converted to a list */

    /* TODO - will need modification if Tcl9 sticks to unsigned indices */

    /* Make limits sane */
    origListLen = ListRepLength(&listRep);
    if (first < 0) {
	first = 0;
    }
    if (first > origListLen) {
	first = origListLen;	/* So we'll insert after last element. */

     * later by not having to go through the ListRepInit and
     * ListObjReplaceAndInvalidate below.
     * TODO - we could be smarter about the reallocate. Use of realloc
     * means all new free space is at the back. Instead, the realloc could
     * be an explicit alloc and memmove which would let us redistribute
     * free space.
     */
    if ((ptrdiff_t)numFreeSlots < lenChange && !ListRepIsShared(&listRep)) {
	/* T:listrep-1.{1,3,14,18,21},3.{3,10,11,14,27,32,41} */
	ListStore *newStorePtr =
	    ListStoreReallocate(listRep.storePtr, origListLen + lenChange);
	if (newStorePtr == NULL) {
	    return MemoryAllocationError(interp,
					 LIST_SIZE(origListLen + lenChange));
	}

     * Case (3) a new ListStore is required
     * (a) The passed-in ListStore is shared
     * (b) There is not enough free space in the unshared passed-in ListStore
     * (c) The new unshared size is much "smaller" (TODO) than the allocated space
     * TODO - for unshared case ONLY, consider a "move" based implementation
     */
    if (ListRepIsShared(&listRep) || /* 3a */
	(ptrdiff_t)numFreeSlots < lenChange ||  /* 3b */
	(origListLen + lenChange) < (listRep.storePtr->numAllocated / 4) /* 3c */
    ) {
	ListRep newRep;
	Tcl_Obj **toObjs;
	listObjs = &listRep.storePtr->slots[ListRepStart(&listRep)];
	ListRepInit(origListLen + lenChange,
		    NULL,

	/*
	 * We need to make room for the insertions. Again we have multiple
	 * possibilities. We may be able to get by just shifting one segment
	 * or need to shift both. In the former case, favor shifting the
	 * smaller segment.
	 */
	ptrdiff_t leadSpace = ListRepNumFreeHead(&listRep);
	ptrdiff_t tailSpace = ListRepNumFreeTail(&listRep);
	ptrdiff_t finalFreeSpace = leadSpace + tailSpace - lenChange;

	LIST_ASSERT((leadSpace + tailSpace) >= lenChange);
	if (leadSpace >= lenChange
	    && (leadSegmentLen < tailSegmentLen || tailSpace < lenChange)) {
	    /* Move only lead to the front to make more room */
            /* T:listrep-3.25,36,38, */
	    leadShift = -lenChange;
	    tailShift = 0;
	    /*
	     * Redistribute the remaining free space between the front and
	     * back if either there is no tail space left or if the
	     * entire list is the head anyways. This is an important
	     * optimization for further operations like further asymmetric
	     * insertions.
	     */
	    if (finalFreeSpace > 1 && (tailSpace == 0 || tailSegmentLen == 0)) {
		ptrdiff_t postShiftLeadSpace = leadSpace - lenChange;
		if (postShiftLeadSpace > (finalFreeSpace/2)) {
		    Tcl_Size extraShift = postShiftLeadSpace - (finalFreeSpace / 2);
		    leadShift -= extraShift;
		    tailShift = -extraShift; /* Move tail to the front as well */
		}
	    } /* else T:listrep-3.{7,12,25,38} */
	    LIST_ASSERT(leadShift >= 0 || leadSpace >= -leadShift);
	} else if (tailSpace >= lenChange) {
	    /* Move only tail segment to the back to make more room. */
            /* T:listrep-3.{8,10,11,14,26,27,30,32,37,39,41} */
	    leadShift = 0;
	    tailShift = lenChange;
	    /*
	     * See comments above. This is analogous.
	     */
	    if (finalFreeSpace > 1 && (leadSpace == 0 || leadSegmentLen == 0)) {
		ptrdiff_t postShiftTailSpace = tailSpace - lenChange;
		if (postShiftTailSpace > (finalFreeSpace/2)) {
		    /* T:listrep-1.{1,3,14,18,21},3.{2,3,26,27} */
		    Tcl_Size extraShift = postShiftTailSpace - (finalFreeSpace / 2);
		    tailShift += extraShift;
		    leadShift = extraShift; /* Move head to the back as well */
		}
	    }

     */

    indexListCopy = TclListObjCopy(NULL, argObj);
    if (indexListCopy == NULL) {
	/*
	 * The argument is neither an index nor a well-formed list.
	 * Report the error via TclLindexFlat.
	 * TODO - This is as original. why not directly return an error?
	 */
	return TclLindexFlat(interp, listObj, 1, &argObj);
    }

    ListObjGetElements(indexListCopy, numIndexObjs, indexObjs);
    listObj = TclLindexFlat(interp, listObj, numIndexObjs, indexObjs);
    Tcl_DecrRefCount(indexListCopy);

    if (capacity == 0) {
	return listObj;
    }
    if (capacity > LIST_MAX) {
	return NULL;
    }

    ListRepInit(capacity, NULL, 0, &listRep);

    ListStore *storePtr = listRep.storePtr;
    size_t i;
    for (i = 0; i < length; ++i) {
	TclNewUIntObj(storePtr->slots[i + leadingSpace], i);
	Tcl_IncrRefCount(storePtr->slots[i + leadingSpace]);
    }