compat/zlib/win32/zdll.lib
compat/zlib/win32/zlib1.dll
compat/zlib/win64/zdll.lib
compat/zlib/win64/zlib1.dll
compat/zlib/win64/libz.dll.a
compat/zlib/zlib.3.pdf
*.bmp
*.gif
*.png

compat/zlib/contrib/dotzlib/DotZLib/UnitTests.cs
compat/zlib/contrib/vstudio/readme.txt
compat/zlib/contrib/vstudio/*/zlib.rc
compat/zlib/win32/*.txt
compat/zlib/win64/*.txt
libtommath/*.dsp
libtommath/*.sln
libtommath/*.vcproj
tools/tcl.hpj.in
tools/tcl.wse.in
win/buildall.vc.bat
win/coffbase.txt
win/makefile.vc
win/rules.vc
win/rules-ext.vc
win/targets.vc
win/tcl.dsp
win/tcl.dsw
win/tcl.hpj.in

compat/zlib/contrib/dotzlib/DotZLib/UnitTests.cs
compat/zlib/contrib/vstudio/readme.txt
compat/zlib/contrib/vstudio/*/zlib.rc
compat/zlib/win32/*.txt
compat/zlib/win64/*.txt
libtommath/*.dsp
libtommath/*.sln
libtommath/*.vcproj
tools/tcl.hpj.in
tools/tcl.wse.in
win/buildall.vc.bat
win/coffbase.txt
win/makefile.bc
win/makefile.vc
win/rules.vc
win/rules-ext.vc
win/targets.vc
win/tcl.dsp
win/tcl.dsw
win/tcl.hpj.in

tools/tcl.hpj.in
tools/tcl.wse.in
win/buildall.vc.bat
win/coffbase.txt
win/makefile.bc
win/makefile.vc
win/rules.vc
win/tcl.dsp
win/tcl.dsw
win/tcl.hpj.in

*.a
*.dll
*.dylib
*.exe
*.exp
*.lib
*.o
*.obj
*.pdb
*.res
*.sl
*.so
*/Makefile
*/config.cache
*/config.log
*/config.status
*/tclConfig.sh
*/tclsh*
*/tcltest*
*/versions.vc
*/version.vc
html
libtommath/bn.ilg
libtommath/bn.ind
libtommath/pretty.build
libtommath/tommath.src
libtommath/*.pdf
libtommath/*.pl
libtommath/*.sh

libtommath/*.out
libtommath/*.tex
unix/autoMkindex.tcl
unix/dltest.marker
unix/tcl.pc
unix/tclIndex
unix/pkgs/*
win/Debug*
win/Release*
win/pkgs/*
win/tcl.hpj
win/nmhlp-out.txt

<?xml version="1.0" encoding="UTF-8"?>
<projectDescription>
	<name>tcl8.7</name>
	<name>tcl8.6</name>
	<comment></comment>
	<projects>
	</projects>
	<buildSpec>
	</buildSpec>
	<natures>
	</natures>

README:  Tcl
    This is the Tcl 8.7a0 source distribution.
    This is the Tcl 8.6.8 source distribution.
	http://sourceforge.net/projects/tcl/files/Tcl/
    You can get any source release of Tcl from the URL above.

Contents
--------
    1. Introduction
    2. Documentation

"license.terms" for complete information.

2. Documentation
----------------

Extensive documentation is available at our website.
The home page for this release, including new features, is
	http://www.tcl.tk/software/tcltk/8.7.html
	http://www.tcl.tk/software/tcltk/8.6.html

Detailed release notes can be found at the file distributions page
by clicking on the relevant version.
	http://sourceforge.net/projects/tcl/files/Tcl/

Information about Tcl itself can be found at
	http://www.tcl.tk/about/

There have been many Tcl books on the market.  Many are mentioned in the Wiki:
	http://wiki.tcl.tk/_/ref?N=25206

To view the complete set of reference manual entries for Tcl 8.7 online,
To view the complete set of reference manual entries for Tcl 8.6 online,
visit the URL:
	http://www.tcl.tk/man/tcl8.7/
	http://www.tcl.tk/man/tcl8.6/

2a. Unix Documentation
----------------------

The "doc" subdirectory in this release contains a complete set of
reference manual entries for Tcl.  Files with extension ".1" are for
programs (for example, tclsh.1); files with extension ".3" are for C

2016-02-03 (bug)[25842c] stream [zlib deflate] fails with 0 input (ade,fellows)

2016-02-04 (bug)[3d96b7][593baa][cf74de] crashes in OO teardown (porter,fellows)

2016-02-22 (bug)[9b4702] [info exists env(missing)] kills trace (nijtmans)

--- Released 8.6.5, February 29, 2016 --- http://core.tcl.tk/tcl/ for details

2016-03-01 (bug)[803042] mem leak due to reference cycle (porter)

2016-03-08 (bug)[bbc304] reflected watch race condition (porter)

2016-03-17 (bug)[fadc99] compile-5.3 (rodriguez,porter)

2016-03-17 (enhancement)[1a25fd] compile [variable ${ns}::v] (porter)

2016-03-20 (bug)[1af8de] crash in compiled [string replace] (harder,fellows)

2016-03-21 (bug)[d30718] segv in notifier finalize (hirofumi,nijtmans)

2016-03-23 (enhancement)[7d0db7] parallel make (yarda,nijtmans)

2016-03-23 [f12535] enable test bindings customization (vogel,nijtmans)

2016-04-04 (bug)[47ac84] compiled [lreplace] fixes (aspect,ferrieux,fellows)
        *** POTENTIAL INCOMPATIBILITY ***

2016-04-08 (bug)[866368] RE \w includes 'Punctuation Connector' (nijtmans)

2016-04-08 (bug)[2538f3] Win crash Tcl_OpenTcpServer() (griffin)

2016-04-10 [07d13d] Restore TclBlend support lost in 8.6.1 (buratti)

2016-05-13 (bug)[3154ea] Mem corruption in assembler exceptions (tkob,kenny)

2016-05-13 (bug) registry package support any Unicode env (nijtmans)
=> registry 1.3.2

2016-05-21 (bug)[f7d4e] [namespace delete] performance (fellows)

2016-06-02 (TIP 447) execution time verbosity option (cerutti)
=> tcltest 2.4.0

2016-06-16 (bug)[16828b] crash due to [vwait] trace undo fail (dah,porter)

2016-06-16 (enhancement)[4b61af] good [info frame] from more cases (beric)

2016-06-21 (bug)[c383eb] crash in [glob -path a] (oehlmann,porter)

2016-06-21 (update) Update Unicode data to 9.0 (nijtmans)
        *** POTENTIAL INCOMPATIBILITY ***

2016-06-22 (bug)[16896d] Tcl_DString tolerate append to self. (dah,porter)

2016-06-23 (bug)[d55322] crash in [dict update] (yorick,fellows)

2016-06-27 (bug)[dd260a] crash in [chan configure -dictionary] (madden,aspect)

2016-07-02 (bug)[f961d7] usage message with parameters with spaces (porter)
        *** POTENTIAL INCOMPATIBILITY ***

2016-07-02 (enhancement)[09fabc] Sort order of -relateddir (lanam)

2016-07-07 (bug)[5d7ca0] Win: [file executable] for .cmd and .ps1 (nadkarni)
        *** POTENTIAL INCOMPATIBILITY ***

2016-07-08 (bug)[a47641] [file normalize] & Windows junctions (nadkarni)

2016-07-09 [ae61a6] [file] handling of Win hardcoded names (CON) (nadkarni)
        *** POTENTIAL INCOMPATIBILITY ***

2016-07-09 [3613671] [file owned] (more) useful on Win (nadkarni)

2016-07-09 (bug)[1493a4] [namespace upvar] use of resolvers (beric,fellows)
        *** POTENTIAL INCOMPATIBILITY ***

2016-07-10 (bug)[da340d] integer division in clock math (nadkarni)

2016-07-20 tzdata updated to Olson's tzdata2016f (venkat)

--- Released 8.6.6, July 27, 2016 --- http://core.tcl.tk/tcl/ for details

2016-09-07 (bug)[c09edf] Bad caching with  custom resolver (neumann,nijtmans)

2016-09-07 (bug)[4dbdd9] Memleak in test var-8.3 (mr_calvin,porter)

2016-10-03 (bug)[2bf561] Allow empty command as alias target (yorick,nijtmans)
        *** POTENTIAL INCOMPATIBILITY ***

2016-10-04 (bug)[4d5ae7] Crash in async connects host no address (gahr,fellows)

2016-10-08 (bug)[838e99] treat application/xml as text (gahr,fellows)
=> http 2.8.10

2016-10-11 (bug)[3cc1d9] Thread finalization crash in zippy (neumann)

2016-10-12 (bug)[be003d] Fix [scan 0x1 %b], [scan 0x1 %o] (porter)

2016-10-14 (bug)[eb6b68] Fix stringComp-14.5 (porter)

2016-10-30 (bug)[b26e38] Fix zlib-7.8 (fellows)

2016-10-30 (bug)[1ae129] Fix memleak in [history] destruction (fellows)

2016-11-04 (feature) Provisional Tcl 9 support in msgcat and tcltest (nijtmans)
=> msgcat 1.6.1
=> tcltest 2.4.1

2016-11-04 (bug)[824752] Crash in Tcl_ListObjReplace() (gahr,porter)

2016-11-11 (bug)[79614f] invalidate VFS mounts on sytem encoding change (yorick)

2016-11-14 OSX: End panic() as legacy support macro; system conflicts (nijtmans)
        *** POTENTIAL INCOMPATIBILITY ***

2016-11-15 (bug) TclOO fix stops crash mixing Itcl and snit (fellows)

2016-11-17 (update) Reconcile libtommath updates; purge unused files (nijtmans)
        *** POTENTIAL INCOMPATIBILITY ***

2017-01-09 (bug)[b87ad7] Repair drifts in timer clock (sebres)

2017-01-17 (update) => zlib 1.2.11 (nijtmans)

2017-01-31 (bug)[39f630] Revise Tcl_LinkVar to tolerate some prefixes (nijtmans)
        *** POTENTIAL INCOMPATIBILITY ***

2017-02-01 (bug)[d0f7ba] Improper NAN optimization. expr-22.1[01] (aspect)

2017-02-26 (bug)[25842c] zlib stream finalization (aspect)

2017-03-07 (deprecate) Remove unmaintained makefile.bc file (nijtmans)
        *** POTENTIAL INCOMPATIBILITY ***

2017-03-14 (enhancement) [clock] and [encoding] are now ensembles (kenny)

2017-03-15 (enhancement) several [clock] subcommands bytecoded (kenny)

2017-03-23 tzdata updated to Olson's tzdata2017b (jima)

2017-03-29 (bug)[900cb0] Fix OO unexport introspection (napier)

2017-04-12 (bug)[42202b] Nesting imbalance in coro injection (nadkarni,sebres)

2017-04-18 (bug)[bc4322] http package support for safe interps (nash,nijtmans)

2017-04-28 (bug)[f34cf8] [file join a //b] => /b (neumann,porter)

2017-05-01 (bug)[8bd13f] Windows threads and pipes (sebres,nijtmans)

2017-05-01 (bug)[f9fe90] [file join //a b] EIAS violation (aspect,porter)

2017-05-04 (bug) Make test filesystem-1.52 pass on Windows (nijtmans)

2017-05-05 (bug)[601522] [binary] field spec overflow -> segfault (porter)

2017-05-08 (bug)[6ca52a] http memleak handling keep-alive (aspect,nijtmans)
=> http 2.8.11

2017-05-29 (bug)[a3fb33] crash in [lsort] on long lists (sebres)

2017-06-05 (bug)[67aa9a] Tcl_UtfToUniChar() revised handling invalid UTF-8 (nijtmans)
        *** POTENTIAL INCOMPATIBILITY ***

2017-06-08 (bug)[2738427] Tcl_NumUtfChars() corner case utf-4.9 (nijtmans)

2017-06-22 (update) Update Unicode data to 10.0 (nijtmans)
        *** POTENTIAL INCOMPATIBILITY ***

2017-06-22 (TIP 473) Let [oo::copy] specify target namespace (fellows)

2017-06-26 (bug)[46f801] Repair autoloader fragility (porter)

2017-07-06 (bug)[adb198] Plug memleak in TclJoinPath (sebres,porter)

2017-07-17 (bug)[fb2208] Repeatable tclIndex generation (wiedemann,nijtmans)

--- Released 8.6.7, August 9, 2017 --- http://core.tcl.tk/tcl/ for details

2017-08-10 [array names -regexp] supports backrefs (goth)

2017-08-10 Fix gcc build failures due to #pragma placement (cassoff,fellows)

2017-08-29 (bug)[b50fb2] exec redir append stdout and stderr to file (coulter)

2017-08-31 (bug)[2a9465] http state 100 continue handling broken (oehlmann)
=> http 2.8.12

2017-09-02 (bug)[0e4d88] replace command, delete trace kills namespace (porter)

2017-10-19 (bug)[1a5655] [info * methods] includes mixins (fellows)

2017-10-23 tzdata updated to Olson's tzdata2017c (jima)

2017-10-24 (bug)[fc1409] segfault in method cloning, oo-15.15 (coulter,fellows)

2017-11-03 (bug)[6f2f83] More robust [load] for ReactOS (werner)

2017-11-08 (bug)[3298012] Stop crash when hash tables overflow 32 bits (porter)

2017-11-14 (bug)[5d6de6] Close failing case of [package prefer stable] (kupries)

2017-11-17 (bug)[fab924] Fix misleading [load] message on Windows (oehlmann)

2017-12-05 (bug)[4f6a1e] Crash when ensemble map and list are same (sebres)

2017-12-06 (bug)[ce3a21] file normalize failure when tail is empty (porter)

2017-12-08 (new)[TIP 477] nmake build system reform (nadkarni)

2017-12-19 (bug)[586e71] EvalObjv exception handling at level #0 (sebres,porter)

--- Released 8.6.8, December 22, 2017 --- http://core.tcl.tk/tcl/ for details

void
closedir(
    register DIR *dirp)
{
    close(dirp->dd_fd);
    dirp->dd_fd = -1;
    dirp->dd_loc = 0;
    ckfree(dirp);
    ckfree((char *) dirp);
}

	result = waitPtr->pid;
	*statusPtr = *((int *) &waitPtr->status);
	if (prevPtr == NULL) {
	    deadList = waitPtr->nextPtr;
	} else {
	    prevPtr->nextPtr = waitPtr->nextPtr;
	}
	ckfree(waitPtr);
	ckfree((char *) waitPtr);
	return result;
    }

    /*
     * Wait for any process to stop or exit. If it's an acceptable one then
     * return it to the caller; otherwise store information about it in the
     * list of exited processes and try again. On systems that have only wait

cmake_minimum_required(VERSION 2.4.4)
set(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS ON)

project(zlib C)

set(VERSION "1.2.9")
set(VERSION "1.2.11")

option(ASM686 "Enable building i686 assembly implementation")
option(AMD64 "Enable building amd64 assembly implementation")

set(INSTALL_BIN_DIR "${CMAKE_INSTALL_PREFIX}/bin" CACHE PATH "Installation directory for executables")
set(INSTALL_LIB_DIR "${CMAKE_INSTALL_PREFIX}/lib" CACHE PATH "Installation directory for libraries")
set(INSTALL_INC_DIR "${CMAKE_INSTALL_PREFIX}/include" CACHE PATH "Installation directory for headers")

                ChangeLog file for zlib

Changes in 1.2.11 (15 Jan 2017)
- Fix deflate stored bug when pulling last block from window
- Permit immediate deflateParams changes before any deflate input

Changes in 1.2.10 (2 Jan 2017)
- Avoid warnings on snprintf() return value
- Fix bug in deflate_stored() for zero-length input
- Fix bug in gzwrite.c that produced corrupt gzip files
- Remove files to be installed before copying them in Makefile.in
- Add warnings when compiling with assembler code

Changes in 1.2.9 (31 Dec 2016)
- Fix contrib/minizip to permit unzipping with desktop API [Zouzou]
- Improve contrib/blast to return unused bytes
- Assure that gzoffset() is correct when appending
- Improve compress() and uncompress() to support large lengths
- Fix bug in test/example.c where error code not saved
- Remedy Coverity warning [Randers-Pehrson]

# Makefile for zlib
# Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
# Copyright (C) 1995-2017 Jean-loup Gailly, Mark Adler
# For conditions of distribution and use, see copyright notice in zlib.h

# To compile and test, type:
#    ./configure; make test
# Normally configure builds both a static and a shared library.
# If you want to build just a static library, use: ./configure --static

LDFLAGS=
TEST_LDFLAGS=-L. libz.a
LDSHARED=$(CC)
CPP=$(CC) -E

STATICLIB=libz.a
SHAREDLIB=libz.so
SHAREDLIBV=libz.so.1.2.9
SHAREDLIBV=libz.so.1.2.11
SHAREDLIBM=libz.so.1
LIBS=$(STATICLIB) $(SHAREDLIBV)

AR=ar
ARFLAGS=rc
RANLIB=ranlib
LDCONFIG=ldconfig

install-libs: $(LIBS)
	-@if [ ! -d $(DESTDIR)$(exec_prefix)  ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi
	-@if [ ! -d $(DESTDIR)$(libdir)       ]; then mkdir -p $(DESTDIR)$(libdir); fi
	-@if [ ! -d $(DESTDIR)$(sharedlibdir) ]; then mkdir -p $(DESTDIR)$(sharedlibdir); fi
	-@if [ ! -d $(DESTDIR)$(man3dir)      ]; then mkdir -p $(DESTDIR)$(man3dir); fi
	-@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi
	rm -f $(DESTDIR)$(libdir)/$(STATICLIB)
	cp $(STATICLIB) $(DESTDIR)$(libdir)
	chmod 644 $(DESTDIR)$(libdir)/$(STATICLIB)
	-@($(RANLIB) $(DESTDIR)$(libdir)/libz.a || true) >/dev/null 2>&1
	-@if test -n "$(SHAREDLIBV)"; then \
	  rm -f $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV); \
	  cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir); \
	  echo "cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)"; \
	  chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV); \
	  echo "chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV)"; \
	  rm -f $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
	  ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB); \
	  ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
	  ($(LDCONFIG) || true)  >/dev/null 2>&1; \
	fi
	rm -f $(DESTDIR)$(man3dir)/zlib.3
	cp $(SRCDIR)zlib.3 $(DESTDIR)$(man3dir)
	chmod 644 $(DESTDIR)$(man3dir)/zlib.3
	rm -f $(DESTDIR)$(pkgconfigdir)/zlib.pc
	cp zlib.pc $(DESTDIR)$(pkgconfigdir)
	chmod 644 $(DESTDIR)$(pkgconfigdir)/zlib.pc
# The ranlib in install is needed on NeXTSTEP which checks file times
# ldconfig is for Linux

install: install-libs
	-@if [ ! -d $(DESTDIR)$(includedir)   ]; then mkdir -p $(DESTDIR)$(includedir); fi
	rm -f $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h
	cp $(SRCDIR)zlib.h zconf.h $(DESTDIR)$(includedir)
	chmod 644 $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h

uninstall:
	cd $(DESTDIR)$(includedir) && rm -f zlib.h zconf.h
	cd $(DESTDIR)$(libdir) && rm -f libz.a; \
	if test -n "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \

ZLIB DATA COMPRESSION LIBRARY

zlib 1.2.9 is a general purpose data compression library.  All the code is
zlib 1.2.11 is a general purpose data compression library.  All the code is
thread safe.  The data format used by the zlib library is described by RFCs
(Request for Comments) 1950 to 1952 in the files
http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
rfc1952 (gzip format).

All functions of the compression library are documented in the file zlib.h
(volunteer to write man pages welcome, contact zlib@gzip.org).  A usage example

PLEASE read the zlib FAQ http://zlib.net/zlib_faq.html before asking for help.

Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan.  1997
issue of Dr.  Dobb's Journal; a copy of the article is available at
http://marknelson.us/1997/01/01/zlib-engine/ .

The changes made in version 1.2.9 are documented in the file ChangeLog.
The changes made in version 1.2.11 are documented in the file ChangeLog.

Unsupported third party contributions are provided in directory contrib/ .

zlib is available in Java using the java.util.zip package, documented at
http://java.sun.com/developer/technicalArticles/Programming/compression/ .

A Perl interface to zlib written by Paul Marquess <pmqs@cpan.org> is available

  The deflate format used by zlib was defined by Phil Katz.  The deflate and
  zlib specifications were written by L.  Peter Deutsch.  Thanks to all the
  people who reported problems and suggested various improvements in zlib; they
  are too numerous to cite here.

Copyright notice:

 (C) 1995-2016 Jean-loup Gailly and Mark Adler
 (C) 1995-2017 Jean-loup Gailly and Mark Adler

  This software is provided 'as-is', without any express or implied
  warranty.  In no event will the authors be held liable for any damages
  arising from the use of this software.

  Permission is granted to anyone to use this software for any purpose,
  including commercial applications, and to alter it and redistribute it

       InBytes = number of bytes in InBuf
  Out: OutBuf = ptr to user-allocated buffer to contain decompressed data
       BufSize = number of bytes in OutBuf   }
procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
  const OutBuf: Pointer; BufSize: Integer);

const
  zlib_version = '1.2.9';
  zlib_version = '1.2.11';

type
  EZlibError = class(Exception);
  ECompressionError = class(EZlibError);
  EDecompressionError = class(EZlibError);

implementation

    public class InfoTests
    {
        #region Info tests
        [Test]
        public void Info_Version()
        {
            Info info = new Info();
            Assert.AreEqual("1.2.9", Info.Version);
            Assert.AreEqual("1.2.11", Info.Version);
            Assert.AreEqual(32, info.SizeOfUInt);
            Assert.AreEqual(32, info.SizeOfULong);
            Assert.AreEqual(32, info.SizeOfPointer);
            Assert.AreEqual(32, info.SizeOfOffset);
        }
        #endregion
    }

/* inftree9.c -- generate Huffman trees for efficient decoding
 * Copyright (C) 1995-2016 Mark Adler
 * Copyright (C) 1995-2017 Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

#include "zutil.h"
#include "inftree9.h"

#define MAXBITS 15

const char inflate9_copyright[] =
   " inflate9 1.2.9 Copyright 1995-2016 Mark Adler ";
   " inflate9 1.2.11 Copyright 1995-2017 Mark Adler ";
/*
  If you use the zlib library in a product, an acknowledgment is welcome
  in the documentation of your product. If for some reason you cannot
  include such an acknowledgment, I would appreciate that you keep this
  copyright string in the executable of your product.
 */

    static const unsigned short lbase[31] = { /* Length codes 257..285 base */
        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17,
        19, 23, 27, 31, 35, 43, 51, 59, 67, 83, 99, 115,
        131, 163, 195, 227, 3, 0, 0};
    static const unsigned short lext[31] = { /* Length codes 257..285 extra */
        128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
        130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
        133, 133, 133, 133, 144, 192, 79};
        133, 133, 133, 133, 144, 77, 202};
    static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
        65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,
        4097, 6145, 8193, 12289, 16385, 24577, 32769, 49153};
    static const unsigned short dext[32] = { /* Distance codes 0..31 extra */
        128, 128, 128, 128, 129, 129, 130, 130, 131, 131, 132, 132,
        133, 133, 134, 134, 135, 135, 136, 136, 137, 137, 138, 138,

#                                               -*- Autoconf -*-
# Process this file with autoconf to produce a configure script.

AC_INIT([minizip], [1.2.9], [bugzilla.redhat.com])
AC_INIT([minizip], [1.2.11], [bugzilla.redhat.com])
AC_CONFIG_SRCDIR([minizip.c])
AM_INIT_AUTOMAKE([foreign])
LT_INIT

AC_MSG_CHECKING([whether to build example programs])
AC_ARG_ENABLE([demos], AC_HELP_STRING([--enable-demos], [build example programs]))
AM_CONDITIONAL([COND_DEMOS], [test "$enable_demos" = yes])

(* zlibpas -- Pascal interface to the zlib data compression library
 *
 * Copyright (C) 2003 Cosmin Truta.
 * Derived from original sources by Bob Dellaca.
 * For conditions of distribution and use, see copyright notice in readme.txt
 *)

unit zlibpas;

interface

const
  ZLIB_VERSION = '1.2.9';
  ZLIB_VERNUM  = $1290;
  ZLIB_VERSION = '1.2.11';
  ZLIB_VERNUM  = $12a0;

type
  alloc_func = function(opaque: Pointer; items, size: Integer): Pointer;
                 cdecl;
  free_func  = procedure(opaque, address: Pointer);
                 cdecl;

Building instructions for the DLL versions of Zlib 1.2.9
Building instructions for the DLL versions of Zlib 1.2.11
========================================================

This directory contains projects that build zlib and minizip using
Microsoft Visual C++ 9.0/10.0.

You don't need to build these projects yourself. You can download the
binaries from:

#include <windows.h>

#define IDR_VERSION1  1
IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
  FILEVERSION	 1, 2, 9, 0
  PRODUCTVERSION 1, 2, 9, 0
  FILEVERSION	 1, 2, 11, 0
  PRODUCTVERSION 1, 2, 11, 0
  FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
  FILEFLAGS	0
  FILEOS	VOS_DOS_WINDOWS32
  FILETYPE	VFT_DLL
  FILESUBTYPE	0	// not used
BEGIN
  BLOCK "StringFileInfo"
  BEGIN
    BLOCK "040904E4"
    //language ID = U.S. English, char set = Windows, Multilingual

    BEGIN
      VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
      VALUE "FileVersion",	"1.2.9\0"
      VALUE "FileVersion",	"1.2.11\0"
      VALUE "InternalName",	"zlib\0"
      VALUE "OriginalFilename",	"zlibwapi.dll\0"
      VALUE "ProductName",	"ZLib.DLL\0"
      VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
      VALUE "LegalCopyright", "(C) 1995-2016 Jean-loup Gailly & Mark Adler\0"
      VALUE "LegalCopyright", "(C) 1995-2017 Jean-loup Gailly & Mark Adler\0"
    END
  END
  BLOCK "VarFileInfo"
  BEGIN
    VALUE "Translation", 0x0409, 1252
  END
END

#include <windows.h>

#define IDR_VERSION1  1
IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
  FILEVERSION	 1, 2, 9, 0
  PRODUCTVERSION 1, 2, 9, 0
  FILEVERSION	 1, 2, 11, 0
  PRODUCTVERSION 1, 2, 11, 0
  FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
  FILEFLAGS	0
  FILEOS	VOS_DOS_WINDOWS32
  FILETYPE	VFT_DLL
  FILESUBTYPE	0	// not used
BEGIN
  BLOCK "StringFileInfo"
  BEGIN
    BLOCK "040904E4"
    //language ID = U.S. English, char set = Windows, Multilingual

    BEGIN
      VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
      VALUE "FileVersion",	"1.2.9\0"
      VALUE "FileVersion",	"1.2.11\0"
      VALUE "InternalName",	"zlib\0"
      VALUE "OriginalFilename",	"zlibwapi.dll\0"
      VALUE "ProductName",	"ZLib.DLL\0"
      VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
      VALUE "LegalCopyright", "(C) 1995-2016 Jean-loup Gailly & Mark Adler\0"
      VALUE "LegalCopyright", "(C) 1995-2017 Jean-loup Gailly & Mark Adler\0"
    END
  END
  BLOCK "VarFileInfo"
  BEGIN
    VALUE "Translation", 0x0409, 1252
  END
END

#include <windows.h>

#define IDR_VERSION1  1
IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
  FILEVERSION	 1, 2, 9, 0
  PRODUCTVERSION 1, 2, 9, 0
  FILEVERSION	 1, 2, 11, 0
  PRODUCTVERSION 1, 2, 11, 0
  FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
  FILEFLAGS	0
  FILEOS	VOS_DOS_WINDOWS32
  FILETYPE	VFT_DLL
  FILESUBTYPE	0	// not used
BEGIN
  BLOCK "StringFileInfo"
  BEGIN
    BLOCK "040904E4"
    //language ID = U.S. English, char set = Windows, Multilingual

    BEGIN
      VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
      VALUE "FileVersion",	"1.2.8.1\0"
      VALUE "FileVersion",	"1.2.11\0"
      VALUE "InternalName",	"zlib\0"
      VALUE "OriginalFilename",	"zlibwapi.dll\0"
      VALUE "ProductName",	"ZLib.DLL\0"
      VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
      VALUE "LegalCopyright", "(C) 1995-2013 Jean-loup Gailly & Mark Adler\0"
      VALUE "LegalCopyright", "(C) 1995-2017 Jean-loup Gailly & Mark Adler\0"
    END
  END
  BLOCK "VarFileInfo"
  BEGIN
    VALUE "Translation", 0x0409, 1252
  END
END

<?xml version="1.0" encoding="utf-8"?>
<Project ToolsVersion="14.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
  <PropertyGroup />
</Project>

<?xml version="1.0" encoding="utf-8"?>
<Project ToolsVersion="14.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
  <PropertyGroup />
</Project>

<?xml version="1.0" encoding="utf-8"?>
<Project ToolsVersion="14.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
  <PropertyGroup />
</Project>

<?xml version="1.0" encoding="utf-8"?>
<Project ToolsVersion="14.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
  <PropertyGroup />
</Project>

#include <windows.h>

#define IDR_VERSION1  1
IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
  FILEVERSION	 1, 2, 9, 0
  PRODUCTVERSION 1, 2, 9, 0
  FILEVERSION	 1, 2, 11, 0
  PRODUCTVERSION 1, 2, 11, 0
  FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
  FILEFLAGS	0
  FILEOS	VOS_DOS_WINDOWS32
  FILETYPE	VFT_DLL
  FILESUBTYPE	0	// not used
BEGIN
  BLOCK "StringFileInfo"
  BEGIN
    BLOCK "040904E4"
    //language ID = U.S. English, char set = Windows, Multilingual

    BEGIN
      VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
      VALUE "FileVersion",	"1.2.8.1\0"
      VALUE "FileVersion",	"1.2.11\0"
      VALUE "InternalName",	"zlib\0"
      VALUE "OriginalFilename",	"zlibwapi.dll\0"
      VALUE "ProductName",	"ZLib.DLL\0"
      VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
      VALUE "LegalCopyright", "(C) 1995-2013 Jean-loup Gailly & Mark Adler\0"
      VALUE "LegalCopyright", "(C) 1995-2017 Jean-loup Gailly & Mark Adler\0"
    END
  END
  BLOCK "VarFileInfo"
  BEGIN
    VALUE "Translation", 0x0409, 1252
  END
END

<?xml version="1.0" encoding="utf-8"?>
<Project ToolsVersion="14.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
  <PropertyGroup />
</Project>

<?xml version="1.0" encoding="utf-8"?>
<Project ToolsVersion="14.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
  <PropertyGroup />
</Project>

#include <windows.h>

#define IDR_VERSION1  1
IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
  FILEVERSION	 1, 2, 9, 0
  PRODUCTVERSION 1, 2, 9, 0
  FILEVERSION	 1, 2, 11, 0
  PRODUCTVERSION 1, 2, 11, 0
  FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
  FILEFLAGS	0
  FILEOS	VOS_DOS_WINDOWS32
  FILETYPE	VFT_DLL
  FILESUBTYPE	0	// not used
BEGIN
  BLOCK "StringFileInfo"
  BEGIN
    BLOCK "040904E4"
    //language ID = U.S. English, char set = Windows, Multilingual

    BEGIN
      VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
      VALUE "FileVersion",	"1.2.9\0"
      VALUE "FileVersion",	"1.2.11\0"
      VALUE "InternalName",	"zlib\0"
      VALUE "OriginalFilename",	"zlibwapi.dll\0"
      VALUE "ProductName",	"ZLib.DLL\0"
      VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
      VALUE "LegalCopyright", "(C) 1995-2016 Jean-loup Gailly & Mark Adler\0"
      VALUE "LegalCopyright", "(C) 1995-2017 Jean-loup Gailly & Mark Adler\0"
    END
  END
  BLOCK "VarFileInfo"
  BEGIN
    VALUE "Translation", 0x0409, 1252
  END
END

/* deflate.c -- compress data using the deflation algorithm
 * Copyright (C) 1995-2016 Jean-loup Gailly and Mark Adler
 * Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

/*
 *  ALGORITHM
 *
 *      The "deflation" process depends on being able to identify portions

 */

/* @(#) $Id$ */

#include "deflate.h"

const char deflate_copyright[] =
   " deflate 1.2.9 Copyright 1995-2016 Jean-loup Gailly and Mark Adler ";
   " deflate 1.2.11 Copyright 1995-2017 Jean-loup Gailly and Mark Adler ";
/*
  If you use the zlib library in a product, an acknowledgment is welcome
  in the documentation of your product. If for some reason you cannot
  include such an acknowledgment, I would appreciate that you keep this
  copyright string in the executable of your product.
 */

local block_state deflate_rle    OF((deflate_state *s, int flush));
local block_state deflate_huff   OF((deflate_state *s, int flush));
local void lm_init        OF((deflate_state *s));
local void putShortMSB    OF((deflate_state *s, uInt b));
local void flush_pending  OF((z_streamp strm));
local unsigned read_buf   OF((z_streamp strm, Bytef *buf, unsigned size));
#ifdef ASMV
#  pragma message("Assembler code may have bugs -- use at your own risk")
      void match_init OF((void)); /* asm code initialization */
      uInt longest_match  OF((deflate_state *s, IPos cur_match));
#else
local uInt longest_match  OF((deflate_state *s, IPos cur_match));
#endif

#ifdef ZLIB_DEBUG

    if (level == Z_DEFAULT_COMPRESSION) level = 6;
#endif
    if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) {
        return Z_STREAM_ERROR;
    }
    func = configuration_table[s->level].func;

    if ((strategy != s->strategy || func != configuration_table[level].func)) {
    if ((strategy != s->strategy || func != configuration_table[level].func) &&
        s->high_water) {
        /* Flush the last buffer: */
        int err = deflate(strm, Z_BLOCK);
        if (err == Z_STREAM_ERROR)
            return err;
        if (strm->avail_out == 0)
            return Z_BUF_ERROR;
    }

            flush_pending(strm);
            if (strm->avail_out == 0) {
              s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */
              return Z_OK;
            }
        }
    }
    Assert(strm->avail_out > 0, "bug2");

    if (flush != Z_FINISH) return Z_OK;
    if (s->wrap <= 0) return Z_STREAM_END;

    /* Write the trailer */
#ifdef GZIP
    if (s->wrap == 2) {

     */
    unsigned min_block = MIN(s->pending_buf_size - 5, s->w_size);

    /* Copy as many min_block or larger stored blocks directly to next_out as
     * possible. If flushing, copy the remaining available input to next_out as
     * stored blocks, if there is enough space.
     */
    unsigned len, left, have, last;
    unsigned len, left, have, last = 0;
    unsigned used = s->strm->avail_in;
    for (;;) {
    do {
        /* Set len to the maximum size block that we can copy directly with the
         * available input data and output space. Set left to how much of that
         * would be copied from what's left in the window.
         */
        len = MAX_STORED;       /* maximum deflate stored block length */
        have = (s->bi_valid + 42) >> 3;         /* number of header bytes */
        if (s->strm->avail_out < have)          /* need room for header */
            break;
            /* maximum stored block length that will fit in avail_out: */
        have = s->strm->avail_out > have ? s->strm->avail_out - have : 0;
        have = s->strm->avail_out - have;
        left = s->strstart - s->block_start;    /* bytes left in window */
        if (len > (ulg)left + s->strm->avail_in)
            len = left + s->strm->avail_in;     /* limit len to the input */
        if (len > have)
            len = have;                         /* limit len to the output */
        if (left > len)
            left = len;                         /* limit window pull to len */

        /* If the stored block would be less than min_block in length, or if
         * unable to copy all of the available input when flushing, then try
         * copying to the window and the pending buffer instead. Also don't
         * write an empty block when flushing -- deflate() does that.
         */
        if (len < min_block && ((len == 0 && flush != Z_FINISH) ||
        if (len < min_block && (len == 0 || flush == Z_NO_FLUSH ||
                                len - left != s->strm->avail_in))
                                flush == Z_NO_FLUSH ||
                                len != left + s->strm->avail_in))
            break;

        /* Make a dummy stored block in pending to get the header bytes,
         * including any pending bits. This also updates the debugging counts.
         */
        last = flush == Z_FINISH && len - left == s->strm->avail_in ? 1 : 0;
        last = flush == Z_FINISH && len == left + s->strm->avail_in ? 1 : 0;
        _tr_stored_block(s, (char *)0, 0L, last);

        /* Replace the lengths in the dummy stored block with len. */
        s->pending_buf[s->pending - 4] = len;
        s->pending_buf[s->pending - 3] = len >> 8;
        s->pending_buf[s->pending - 2] = ~len;
        s->pending_buf[s->pending - 1] = ~len >> 8;

        /* Write the stored block header bytes. */
        flush_pending(s->strm);

        /* Update debugging counts for the data about to be copied. */
#ifdef ZLIB_DEBUG
        /* Update debugging counts for the data about to be copied. */
        s->compressed_len += len << 3;
        s->bits_sent += len << 3;
#endif

        /* Copy uncompressed bytes from the window to next_out. */
        if (left) {
            if (left > len)
                left = len;
            zmemcpy(s->strm->next_out, s->window + s->block_start, left);
            s->strm->next_out += left;
            s->strm->avail_out -= left;
            s->strm->total_out += left;
            s->block_start += left;
            len -= left;
        }

        /* Copy uncompressed bytes directly from next_in to next_out, updating
         * the check value.
         */
        if (len) {
            read_buf(s->strm, s->strm->next_out, len);
            s->strm->next_out += len;
            s->strm->avail_out -= len;
            s->strm->total_out += len;
        }
    }
    } while (last == 0);

    /* Update the sliding window with the last s->w_size bytes of the copied
     * data, or append all of the copied data to the existing window if less
     * than s->w_size bytes were copied. Also update the number of bytes to
     * insert in the hash tables, in the event that deflateParams() switches to
     * a non-zero compression level.
     */

            }
            zmemcpy(s->window + s->strstart, s->strm->next_in - used, used);
            s->strstart += used;
        }
        s->block_start = s->strstart;
        s->insert += MIN(used, s->w_size - s->insert);
    }
    if (s->high_water < s->strstart)
        s->high_water = s->strstart;

    /* If the last block was written to next_out, then done. */
    if (last)
        return finish_done;

    /* If flushing or finishing and all input has been consumed, then done. If
    /* If flushing and all input has been consumed, then done. */
     * the code above couldn't write a complete block to next_out, then the
     * code following this won't be able to either.
     */
    if (flush != Z_NO_FLUSH && s->strm->avail_in == 0 &&
        (long)s->strstart == s->block_start)
        return flush == Z_FINISH ? finish_done : block_done;
    if (flush != Z_NO_FLUSH && flush != Z_FINISH &&
        s->strm->avail_in == 0 && (long)s->strstart == s->block_start)
        return block_done;

    /* Fill the window with any remaining input. */
    have = s->window_size - s->strstart - 1;
    if (s->strm->avail_in > have && s->block_start >= (long)s->w_size) {
        /* Slide the window down. */
        s->block_start -= s->w_size;
        s->strstart -= s->w_size;
        zmemcpy(s->window, s->window + s->w_size, s->strstart);
        if (s->matches < 2)
            s->matches++;           /* add a pending slide_hash() */
        have += s->w_size;          /* more space now */
    }
    if (have > s->strm->avail_in)
        have = s->strm->avail_in;
    if (have) {
        read_buf(s->strm, s->window + s->strstart, have);
        s->strstart += have;
    }
    if (s->high_water < s->strstart)
        s->high_water = s->strstart;

    /* There was not enough avail_out to write a complete worthy or flushed
     * stored block to next_out. Write a stored block to pending instead, if we
     * have enough input for a worthy block, or if flushing and there is enough
     * room for the remaining input as a stored block in the pending buffer.
     */
    have = (s->bi_valid + 42) >> 3;         /* number of header bytes */
        /* maximum stored block length that will fit in pending: */
    have = MIN(s->pending_buf_size - have, MAX_STORED);
    min_block = MIN(have, s->w_size);
    left = s->strstart - s->block_start;
    if (left >= min_block ||
        (left && flush != Z_NO_FLUSH && s->strm->avail_in == 0 &&
         left <= have)) {
        ((left || flush == Z_FINISH) && flush != Z_NO_FLUSH &&
         s->strm->avail_in == 0 && left <= have)) {
        len = MIN(left, have);
        last = flush == Z_FINISH && s->strm->avail_in == 0 &&
               len == left ? 1 : 0;
        _tr_stored_block(s, (charf *)s->window + s->block_start, len, last);
        s->block_start += len;
        flush_pending(s->strm);
        if (last)
            return finish_started;
    }

    /* We've done all we can with the available input and output. */
    return need_more;
    return last ? finish_started : need_more;
}

/* ===========================================================================
 * Compress as much as possible from the input stream, return the current
 * block state.
 * This function does not perform lazy evaluation of matches and inserts
 * new strings in the dictionary only for unmatched strings or for short

1. Compression algorithm (deflate)

The deflation algorithm used by gzip (also zip and zlib) is a variation of
LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in
the input data.  The second occurrence of a string is replaced by a
pointer to the previous string, in the form of a pair (distance,
length).  Distances are limited to 32K bytes, and lengths are limited
to 258 bytes. When a string does not occur anywhere in the previous
32K bytes, it is emitted as a sequence of literal bytes.  (In this
description, `string' must be taken as an arbitrary sequence of bytes,
and is not restricted to printable characters.)

Literals or match lengths are compressed with one Huffman tree, and
match distances are compressed with another tree. The trees are stored
in a compact form at the start of each block. The blocks can have any
size (except that the compressed data for one block must fit in
available memory). A block is terminated when deflate() determines that
it would be useful to start another block with fresh trees. (This is
somewhat similar to the behavior of LZW-based _compress_.)

Duplicated strings are found using a hash table. All input strings of
length 3 are inserted in the hash table. A hash index is computed for
the next 3 bytes. If the hash chain for this index is not empty, all
strings in the chain are compared with the current input string, and
the longest match is selected.

The hash chains are searched starting with the most recent strings, to
favor small distances and thus take advantage of the Huffman encoding.
The hash chains are singly linked. There are no deletions from the
hash chains, the algorithm simply discards matches that are too old.

To avoid a worst-case situation, very long hash chains are arbitrarily
truncated at a certain length, determined by a runtime option (level
parameter of deflateInit). So deflate() does not always find the longest
possible match but generally finds a match which is long enough.

deflate() also defers the selection of matches with a lazy evaluation
mechanism. After a match of length N has been found, deflate() searches for
a longer match at the next input byte. If a longer match is found, the
previous match is truncated to a length of one (thus producing a single
literal byte) and the process of lazy evaluation begins again. Otherwise,
the original match is kept, and the next match search is attempted only N
steps later.

The lazy match evaluation is also subject to a runtime parameter. If
the current match is long enough, deflate() reduces the search for a longer
match, thus speeding up the whole process. If compression ratio is more
important than speed, deflate() attempts a complete second search even if
the first match is already long enough.

The lazy match evaluation is not performed for the fastest compression
modes (level parameter 1 to 3). For these fast modes, new strings
are inserted in the hash table only when no match was found, or
when the match is not too long. This degrades the compression ratio
but saves time since there are both fewer insertions and fewer searches.


2. Decompression algorithm (inflate)

2.1 Introduction

The key question is how to represent a Huffman code (or any prefix code) so
that you can decode fast.  The most important characteristic is that shorter
codes are much more common than longer codes, so pay attention to decoding the
short codes fast, and let the long codes take longer to decode.

inflate() sets up a first level table that covers some number of bits of
input less than the length of longest code.  It gets that many bits from the
stream, and looks it up in the table.  The table will tell if the next
code is that many bits or less and how many, and if it is, it will tell
the value, else it will point to the next level table for which inflate()
grabs more bits and tries to decode a longer code.

How many bits to make the first lookup is a tradeoff between the time it
takes to decode and the time it takes to build the table.  If building the
table took no time (and if you had infinite memory), then there would only
be a first level table to cover all the way to the longest code.  However,
building the table ends up taking a lot longer for more bits since short
codes are replicated many times in such a table.  What inflate() does is
simply to make the number of bits in the first table a variable, and  then
to set that variable for the maximum speed.

For inflate, which has 286 possible codes for the literal/length tree, the size
of the first table is nine bits.  Also the distance trees have 30 possible
values, and the size of the first table is six bits.  Note that for each of
those cases, the table ended up one bit longer than the ``average'' code
length, i.e. the code length of an approximately flat code which would be a
little more than eight bits for 286 symbols and a little less than five bits
for 30 symbols.


2.2 More details on the inflate table lookup

Ok, you want to know what this cleverly obfuscated inflate tree actually
looks like.  You are correct that it's not a Huffman tree.  It is simply a
lookup table for the first, let's say, nine bits of a Huffman symbol.  The
symbol could be as short as one bit or as long as 15 bits.  If a particular
symbol is shorter than nine bits, then that symbol's translation is duplicated
in all those entries that start with that symbol's bits.  For example, if the
symbol is four bits, then it's duplicated 32 times in a nine-bit table.  If a
symbol is nine bits long, it appears in the table once.

If the symbol is longer than nine bits, then that entry in the table points
to another similar table for the remaining bits.  Again, there are duplicated
entries as needed.  The idea is that most of the time the symbol will be short
and there will only be one table look up.  (That's whole idea behind data
compression in the first place.)  For the less frequent long symbols, there
will be two lookups.  If you had a compression method with really long
symbols, you could have as many levels of lookups as is efficient.  For
inflate, two is enough.

So a table entry either points to another table (in which case nine bits in
the above example are gobbled), or it contains the translation for the symbol
and the number of bits to gobble.  Then you start again with the next
ungobbled bit.

You may wonder: why not just have one lookup table for how ever many bits the
longest symbol is?  The reason is that if you do that, you end up spending
more time filling in duplicate symbol entries than you do actually decoding.
At least for deflate's output that generates new trees every several 10's of
kbytes.  You can imagine that filling in a 2^15 entry table for a 15-bit code
would take too long if you're only decoding several thousand symbols.  At the
other extreme, you could make a new table for every bit in the code.  In fact,
that's essentially a Huffman tree.  But then you spend too much time
traversing the tree while decoding, even for short symbols.

So the number of bits for the first lookup table is a trade of the time to
fill out the table vs. the time spent looking at the second level and above of
the table.

Here is an example, scaled down:

The code being decoded, with 10 symbols, from 1 to 6 bits long:

A: 0
B: 10
C: 1100
D: 11010
E: 11011
F: 11100
G: 11101
H: 11110
I: 111110
J: 111111

Let's make the first table three bits long (eight entries):

000: A,1
001: A,1
010: A,1
011: A,1
100: B,2
101: B,2
110: -> table X (gobble 3 bits)
111: -> table Y (gobble 3 bits)

Each entry is what the bits decode as and how many bits that is, i.e. how
many bits to gobble.  Or the entry points to another table, with the number of
bits to gobble implicit in the size of the table.

Table X is two bits long since the longest code starting with 110 is five bits
long:

00: C,1
01: C,1
10: D,2
11: E,2

Table Y is three bits long since the longest code starting with 111 is six
bits long:

000: F,2
001: F,2
010: G,2
011: G,2
100: H,2
101: H,2
110: I,3
111: J,3

So what we have here are three tables with a total of 20 entries that had to
be constructed.  That's compared to 64 entries for a single table.  Or
compared to 16 entries for a Huffman tree (six two entry tables and one four
entry table).  Assuming that the code ideally represents the probability of
the symbols, it takes on the average 1.25 lookups per symbol.  That's compared
to one lookup for the single table, or 1.66 lookups per symbol for the
Huffman tree.

There, I think that gives you a picture of what's going on.  For inflate, the
meaning of a particular symbol is often more than just a letter.  It can be a
byte (a "literal"), or it can be either a length or a distance which
indicates a base value and a number of bits to fetch after the code that is
added to the base value.  Or it might be the special end-of-block code.  The
data structures created in inftrees.c try to encode all that information
compactly in the tables.


Jean-loup Gailly        Mark Adler
jloup@gzip.org          madler@alumni.caltech.edu


References:

[LZ77] Ziv J., Lempel A., ``A Universal Algorithm for Sequential Data
Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3,
pp. 337-343.

``DEFLATE Compressed Data Format Specification'' available in
http://tools.ietf.org/html/rfc1951

Network Working Group                                         P. Deutsch
Request for Comments: 1950                           Aladdin Enterprises
Category: Informational                                      J-L. Gailly
                                                                Info-ZIP
                                                                May 1996


         ZLIB Compressed Data Format Specification version 3.3

Status of This Memo

   This memo provides information for the Internet community.  This memo
   does not specify an Internet standard of any kind.  Distribution of
   this memo is unlimited.

IESG Note:

   The IESG takes no position on the validity of any Intellectual
   Property Rights statements contained in this document.

Notices

   Copyright (c) 1996 L. Peter Deutsch and Jean-Loup Gailly

   Permission is granted to copy and distribute this document for any
   purpose and without charge, including translations into other
   languages and incorporation into compilations, provided that the
   copyright notice and this notice are preserved, and that any
   substantive changes or deletions from the original are clearly
   marked.

   A pointer to the latest version of this and related documentation in
   HTML format can be found at the URL
   <ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html>.

Abstract

   This specification defines a lossless compressed data format.  The
   data can be produced or consumed, even for an arbitrarily long
   sequentially presented input data stream, using only an a priori
   bounded amount of intermediate storage.  The format presently uses
   the DEFLATE compression method but can be easily extended to use
   other compression methods.  It can be implemented readily in a manner
   not covered by patents.  This specification also defines the ADLER-32
   checksum (an extension and improvement of the Fletcher checksum),
   used for detection of data corruption, and provides an algorithm for
   computing it.




Deutsch & Gailly             Informational                      [Page 1]

RFC 1950       ZLIB Compressed Data Format Specification        May 1996


Table of Contents

   1. Introduction ................................................... 2
      1.1. Purpose ................................................... 2
      1.2. Intended audience ......................................... 3
      1.3. Scope ..................................................... 3
      1.4. Compliance ................................................ 3
      1.5.  Definitions of terms and conventions used ................ 3
      1.6. Changes from previous versions ............................ 3
   2. Detailed specification ......................................... 3
      2.1. Overall conventions ....................................... 3
      2.2. Data format ............................................... 4
      2.3. Compliance ................................................ 7
   3. References ..................................................... 7
   4. Source code .................................................... 8
   5. Security Considerations ........................................ 8
   6. Acknowledgements ............................................... 8
   7. Authors' Addresses ............................................. 8
   8. Appendix: Rationale ............................................ 9
   9. Appendix: Sample code ..........................................10

1. Introduction

   1.1. Purpose

      The purpose of this specification is to define a lossless
      compressed data format that:

          * Is independent of CPU type, operating system, file system,
            and character set, and hence can be used for interchange;

          * Can be produced or consumed, even for an arbitrarily long
            sequentially presented input data stream, using only an a
            priori bounded amount of intermediate storage, and hence can
            be used in data communications or similar structures such as
            Unix filters;

          * Can use a number of different compression methods;

          * Can be implemented readily in a manner not covered by
            patents, and hence can be practiced freely.

      The data format defined by this specification does not attempt to
      allow random access to compressed data.







Deutsch & Gailly             Informational                      [Page 2]

RFC 1950       ZLIB Compressed Data Format Specification        May 1996


   1.2. Intended audience

      This specification is intended for use by implementors of software
      to compress data into zlib format and/or decompress data from zlib
      format.

      The text of the specification assumes a basic background in
      programming at the level of bits and other primitive data
      representations.

   1.3. Scope

      The specification specifies a compressed data format that can be
      used for in-memory compression of a sequence of arbitrary bytes.

   1.4. Compliance

      Unless otherwise indicated below, a compliant decompressor must be
      able to accept and decompress any data set that conforms to all
      the specifications presented here; a compliant compressor must
      produce data sets that conform to all the specifications presented
      here.

   1.5.  Definitions of terms and conventions used

      byte: 8 bits stored or transmitted as a unit (same as an octet).
      (For this specification, a byte is exactly 8 bits, even on
      machines which store a character on a number of bits different
      from 8.) See below, for the numbering of bits within a byte.

   1.6. Changes from previous versions

      Version 3.1 was the first public release of this specification.
      In version 3.2, some terminology was changed and the Adler-32
      sample code was rewritten for clarity.  In version 3.3, the
      support for a preset dictionary was introduced, and the
      specification was converted to RFC style.

2. Detailed specification

   2.1. Overall conventions

      In the diagrams below, a box like this:

         +---+
         |   | <-- the vertical bars might be missing
         +---+




Deutsch & Gailly             Informational                      [Page 3]

RFC 1950       ZLIB Compressed Data Format Specification        May 1996


      represents one byte; a box like this:

         +==============+
         |              |
         +==============+

      represents a variable number of bytes.

      Bytes stored within a computer do not have a "bit order", since
      they are always treated as a unit.  However, a byte considered as
      an integer between 0 and 255 does have a most- and least-
      significant bit, and since we write numbers with the most-
      significant digit on the left, we also write bytes with the most-
      significant bit on the left.  In the diagrams below, we number the
      bits of a byte so that bit 0 is the least-significant bit, i.e.,
      the bits are numbered:

         +--------+
         |76543210|
         +--------+

      Within a computer, a number may occupy multiple bytes.  All
      multi-byte numbers in the format described here are stored with
      the MOST-significant byte first (at the lower memory address).
      For example, the decimal number 520 is stored as:

             0     1
         +--------+--------+
         |00000010|00001000|
         +--------+--------+
          ^        ^
          |        |
          |        + less significant byte = 8
          + more significant byte = 2 x 256

   2.2. Data format

      A zlib stream has the following structure:

           0   1
         +---+---+
         |CMF|FLG|   (more-->)
         +---+---+








Deutsch & Gailly             Informational                      [Page 4]

RFC 1950       ZLIB Compressed Data Format Specification        May 1996


      (if FLG.FDICT set)

           0   1   2   3
         +---+---+---+---+
         |     DICTID    |   (more-->)
         +---+---+---+---+

         +=====================+---+---+---+---+
         |...compressed data...|    ADLER32    |
         +=====================+---+---+---+---+

      Any data which may appear after ADLER32 are not part of the zlib
      stream.

      CMF (Compression Method and flags)
         This byte is divided into a 4-bit compression method and a 4-
         bit information field depending on the compression method.

            bits 0 to 3  CM     Compression method
            bits 4 to 7  CINFO  Compression info

      CM (Compression method)
         This identifies the compression method used in the file. CM = 8
         denotes the "deflate" compression method with a window size up
         to 32K.  This is the method used by gzip and PNG (see
         references [1] and [2] in Chapter 3, below, for the reference
         documents).  CM = 15 is reserved.  It might be used in a future
         version of this specification to indicate the presence of an
         extra field before the compressed data.

      CINFO (Compression info)
         For CM = 8, CINFO is the base-2 logarithm of the LZ77 window
         size, minus eight (CINFO=7 indicates a 32K window size). Values
         of CINFO above 7 are not allowed in this version of the
         specification.  CINFO is not defined in this specification for
         CM not equal to 8.

      FLG (FLaGs)
         This flag byte is divided as follows:

            bits 0 to 4  FCHECK  (check bits for CMF and FLG)
            bit  5       FDICT   (preset dictionary)
            bits 6 to 7  FLEVEL  (compression level)

         The FCHECK value must be such that CMF and FLG, when viewed as
         a 16-bit unsigned integer stored in MSB order (CMF*256 + FLG),
         is a multiple of 31.




Deutsch & Gailly             Informational                      [Page 5]

RFC 1950       ZLIB Compressed Data Format Specification        May 1996


      FDICT (Preset dictionary)
         If FDICT is set, a DICT dictionary identifier is present
         immediately after the FLG byte. The dictionary is a sequence of
         bytes which are initially fed to the compressor without
         producing any compressed output. DICT is the Adler-32 checksum
         of this sequence of bytes (see the definition of ADLER32
         below).  The decompressor can use this identifier to determine
         which dictionary has been used by the compressor.

      FLEVEL (Compression level)
         These flags are available for use by specific compression
         methods.  The "deflate" method (CM = 8) sets these flags as
         follows:

            0 - compressor used fastest algorithm
            1 - compressor used fast algorithm
            2 - compressor used default algorithm
            3 - compressor used maximum compression, slowest algorithm

         The information in FLEVEL is not needed for decompression; it
         is there to indicate if recompression might be worthwhile.

      compressed data
         For compression method 8, the compressed data is stored in the
         deflate compressed data format as described in the document
         "DEFLATE Compressed Data Format Specification" by L. Peter
         Deutsch. (See reference [3] in Chapter 3, below)

         Other compressed data formats are not specified in this version
         of the zlib specification.

      ADLER32 (Adler-32 checksum)
         This contains a checksum value of the uncompressed data
         (excluding any dictionary data) computed according to Adler-32
         algorithm. This algorithm is a 32-bit extension and improvement
         of the Fletcher algorithm, used in the ITU-T X.224 / ISO 8073
         standard. See references [4] and [5] in Chapter 3, below)

         Adler-32 is composed of two sums accumulated per byte: s1 is
         the sum of all bytes, s2 is the sum of all s1 values. Both sums
         are done modulo 65521. s1 is initialized to 1, s2 to zero.  The
         Adler-32 checksum is stored as s2*65536 + s1 in most-
         significant-byte first (network) order.








Deutsch & Gailly             Informational                      [Page 6]

RFC 1950       ZLIB Compressed Data Format Specification        May 1996


   2.3. Compliance

      A compliant compressor must produce streams with correct CMF, FLG
      and ADLER32, but need not support preset dictionaries.  When the
      zlib data format is used as part of another standard data format,
      the compressor may use only preset dictionaries that are specified
      by this other data format.  If this other format does not use the
      preset dictionary feature, the compressor must not set the FDICT
      flag.

      A compliant decompressor must check CMF, FLG, and ADLER32, and
      provide an error indication if any of these have incorrect values.
      A compliant decompressor must give an error indication if CM is
      not one of the values defined in this specification (only the
      value 8 is permitted in this version), since another value could
      indicate the presence of new features that would cause subsequent
      data to be interpreted incorrectly.  A compliant decompressor must
      give an error indication if FDICT is set and DICTID is not the
      identifier of a known preset dictionary.  A decompressor may
      ignore FLEVEL and still be compliant.  When the zlib data format
      is being used as a part of another standard format, a compliant
      decompressor must support all the preset dictionaries specified by
      the other format. When the other format does not use the preset
      dictionary feature, a compliant decompressor must reject any
      stream in which the FDICT flag is set.

3. References

   [1] Deutsch, L.P.,"GZIP Compressed Data Format Specification",
       available in ftp://ftp.uu.net/pub/archiving/zip/doc/

   [2] Thomas Boutell, "PNG (Portable Network Graphics) specification",
       available in ftp://ftp.uu.net/graphics/png/documents/

   [3] Deutsch, L.P.,"DEFLATE Compressed Data Format Specification",
       available in ftp://ftp.uu.net/pub/archiving/zip/doc/

   [4] Fletcher, J. G., "An Arithmetic Checksum for Serial
       Transmissions," IEEE Transactions on Communications, Vol. COM-30,
       No. 1, January 1982, pp. 247-252.

   [5] ITU-T Recommendation X.224, Annex D, "Checksum Algorithms,"
       November, 1993, pp. 144, 145. (Available from
       gopher://info.itu.ch). ITU-T X.244 is also the same as ISO 8073.







Deutsch & Gailly             Informational                      [Page 7]

RFC 1950       ZLIB Compressed Data Format Specification        May 1996


4. Source code

   Source code for a C language implementation of a "zlib" compliant
   library is available at ftp://ftp.uu.net/pub/archiving/zip/zlib/.

5. Security Considerations

   A decoder that fails to check the ADLER32 checksum value may be
   subject to undetected data corruption.

6. Acknowledgements

   Trademarks cited in this document are the property of their
   respective owners.

   Jean-Loup Gailly and Mark Adler designed the zlib format and wrote
   the related software described in this specification.  Glenn
   Randers-Pehrson converted this document to RFC and HTML format.

7. Authors' Addresses

   L. Peter Deutsch
   Aladdin Enterprises
   203 Santa Margarita Ave.
   Menlo Park, CA 94025

   Phone: (415) 322-0103 (AM only)
   FAX:   (415) 322-1734
   EMail: <ghost@aladdin.com>


   Jean-Loup Gailly

   EMail: <gzip@prep.ai.mit.edu>

   Questions about the technical content of this specification can be
   sent by email to

   Jean-Loup Gailly <gzip@prep.ai.mit.edu> and
   Mark Adler <madler@alumni.caltech.edu>

   Editorial comments on this specification can be sent by email to

   L. Peter Deutsch <ghost@aladdin.com> and
   Glenn Randers-Pehrson <randeg@alumni.rpi.edu>






Deutsch & Gailly             Informational                      [Page 8]

RFC 1950       ZLIB Compressed Data Format Specification        May 1996


8. Appendix: Rationale

   8.1. Preset dictionaries

      A preset dictionary is specially useful to compress short input
      sequences. The compressor can take advantage of the dictionary
      context to encode the input in a more compact manner. The
      decompressor can be initialized with the appropriate context by
      virtually decompressing a compressed version of the dictionary
      without producing any output. However for certain compression
      algorithms such as the deflate algorithm this operation can be
      achieved without actually performing any decompression.

      The compressor and the decompressor must use exactly the same
      dictionary. The dictionary may be fixed or may be chosen among a
      certain number of predefined dictionaries, according to the kind
      of input data. The decompressor can determine which dictionary has
      been chosen by the compressor by checking the dictionary
      identifier. This document does not specify the contents of
      predefined dictionaries, since the optimal dictionaries are
      application specific. Standard data formats using this feature of
      the zlib specification must precisely define the allowed
      dictionaries.

   8.2. The Adler-32 algorithm

      The Adler-32 algorithm is much faster than the CRC32 algorithm yet
      still provides an extremely low probability of undetected errors.

      The modulo on unsigned long accumulators can be delayed for 5552
      bytes, so the modulo operation time is negligible.  If the bytes
      are a, b, c, the second sum is 3a + 2b + c + 3, and so is position
      and order sensitive, unlike the first sum, which is just a
      checksum.  That 65521 is prime is important to avoid a possible
      large class of two-byte errors that leave the check unchanged.
      (The Fletcher checksum uses 255, which is not prime and which also
      makes the Fletcher check insensitive to single byte changes 0 <->
      255.)

      The sum s1 is initialized to 1 instead of zero to make the length
      of the sequence part of s2, so that the length does not have to be
      checked separately. (Any sequence of zeroes has a Fletcher
      checksum of zero.)








Deutsch & Gailly             Informational                      [Page 9]

RFC 1950       ZLIB Compressed Data Format Specification        May 1996


9. Appendix: Sample code

   The following C code computes the Adler-32 checksum of a data buffer.
   It is written for clarity, not for speed.  The sample code is in the
   ANSI C programming language. Non C users may find it easier to read
   with these hints:

      &      Bitwise AND operator.
      >>     Bitwise right shift operator. When applied to an
             unsigned quantity, as here, right shift inserts zero bit(s)
             at the left.
      <<     Bitwise left shift operator. Left shift inserts zero
             bit(s) at the right.
      ++     "n++" increments the variable n.
      %      modulo operator: a % b is the remainder of a divided by b.

      #define BASE 65521 /* largest prime smaller than 65536 */

      /*
         Update a running Adler-32 checksum with the bytes buf[0..len-1]
       and return the updated checksum. The Adler-32 checksum should be
       initialized to 1.

       Usage example:

         unsigned long adler = 1L;

         while (read_buffer(buffer, length) != EOF) {
           adler = update_adler32(adler, buffer, length);
         }
         if (adler != original_adler) error();
      */
      unsigned long update_adler32(unsigned long adler,
         unsigned char *buf, int len)
      {
        unsigned long s1 = adler & 0xffff;
        unsigned long s2 = (adler >> 16) & 0xffff;
        int n;

        for (n = 0; n < len; n++) {
          s1 = (s1 + buf[n]) % BASE;
          s2 = (s2 + s1)     % BASE;
        }
        return (s2 << 16) + s1;
      }

      /* Return the adler32 of the bytes buf[0..len-1] */




Deutsch & Gailly             Informational                     [Page 10]

RFC 1950       ZLIB Compressed Data Format Specification        May 1996


      unsigned long adler32(unsigned char *buf, int len)
      {
        return update_adler32(1L, buf, len);
      }















































Deutsch & Gailly             Informational                     [Page 11]


Network Working Group                                         P. Deutsch
Request for Comments: 1951                           Aladdin Enterprises
Category: Informational                                         May 1996


        DEFLATE Compressed Data Format Specification version 1.3

Status of This Memo

   This memo provides information for the Internet community.  This memo
   does not specify an Internet standard of any kind.  Distribution of
   this memo is unlimited.

IESG Note:

   The IESG takes no position on the validity of any Intellectual
   Property Rights statements contained in this document.

Notices

   Copyright (c) 1996 L. Peter Deutsch

   Permission is granted to copy and distribute this document for any
   purpose and without charge, including translations into other
   languages and incorporation into compilations, provided that the
   copyright notice and this notice are preserved, and that any
   substantive changes or deletions from the original are clearly
   marked.

   A pointer to the latest version of this and related documentation in
   HTML format can be found at the URL
   <ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html>.

Abstract

   This specification defines a lossless compressed data format that
   compresses data using a combination of the LZ77 algorithm and Huffman
   coding, with efficiency comparable to the best currently available
   general-purpose compression methods.  The data can be produced or
   consumed, even for an arbitrarily long sequentially presented input
   data stream, using only an a priori bounded amount of intermediate
   storage.  The format can be implemented readily in a manner not
   covered by patents.








Deutsch                      Informational                      [Page 1]

RFC 1951      DEFLATE Compressed Data Format Specification      May 1996


Table of Contents

   1. Introduction ................................................... 2
      1.1. Purpose ................................................... 2
      1.2. Intended audience ......................................... 3
      1.3. Scope ..................................................... 3
      1.4. Compliance ................................................ 3
      1.5.  Definitions of terms and conventions used ................ 3
      1.6. Changes from previous versions ............................ 4
   2. Compressed representation overview ............................. 4
   3. Detailed specification ......................................... 5
      3.1. Overall conventions ....................................... 5
          3.1.1. Packing into bytes .................................. 5
      3.2. Compressed block format ................................... 6
          3.2.1. Synopsis of prefix and Huffman coding ............... 6
          3.2.2. Use of Huffman coding in the "deflate" format ....... 7
          3.2.3. Details of block format ............................. 9
          3.2.4. Non-compressed blocks (BTYPE=00) ................... 11
          3.2.5. Compressed blocks (length and distance codes) ...... 11
          3.2.6. Compression with fixed Huffman codes (BTYPE=01) .... 12
          3.2.7. Compression with dynamic Huffman codes (BTYPE=10) .. 13
      3.3. Compliance ............................................... 14
   4. Compression algorithm details ................................. 14
   5. References .................................................... 16
   6. Security Considerations ....................................... 16
   7. Source code ................................................... 16
   8. Acknowledgements .............................................. 16
   9. Author's Address .............................................. 17

1. Introduction

   1.1. Purpose

      The purpose of this specification is to define a lossless
      compressed data format that:
          * Is independent of CPU type, operating system, file system,
            and character set, and hence can be used for interchange;
          * Can be produced or consumed, even for an arbitrarily long
            sequentially presented input data stream, using only an a
            priori bounded amount of intermediate storage, and hence
            can be used in data communications or similar structures
            such as Unix filters;
          * Compresses data with efficiency comparable to the best
            currently available general-purpose compression methods,
            and in particular considerably better than the "compress"
            program;
          * Can be implemented readily in a manner not covered by
            patents, and hence can be practiced freely;



Deutsch                      Informational                      [Page 2]

RFC 1951      DEFLATE Compressed Data Format Specification      May 1996


          * Is compatible with the file format produced by the current
            widely used gzip utility, in that conforming decompressors
            will be able to read data produced by the existing gzip
            compressor.

      The data format defined by this specification does not attempt to:

          * Allow random access to compressed data;
          * Compress specialized data (e.g., raster graphics) as well
            as the best currently available specialized algorithms.

      A simple counting argument shows that no lossless compression
      algorithm can compress every possible input data set.  For the
      format defined here, the worst case expansion is 5 bytes per 32K-
      byte block, i.e., a size increase of 0.015% for large data sets.
      English text usually compresses by a factor of 2.5 to 3;
      executable files usually compress somewhat less; graphical data
      such as raster images may compress much more.

   1.2. Intended audience

      This specification is intended for use by implementors of software
      to compress data into "deflate" format and/or decompress data from
      "deflate" format.

      The text of the specification assumes a basic background in
      programming at the level of bits and other primitive data
      representations.  Familiarity with the technique of Huffman coding
      is helpful but not required.

   1.3. Scope

      The specification specifies a method for representing a sequence
      of bytes as a (usually shorter) sequence of bits, and a method for
      packing the latter bit sequence into bytes.

   1.4. Compliance

      Unless otherwise indicated below, a compliant decompressor must be
      able to accept and decompress any data set that conforms to all
      the specifications presented here; a compliant compressor must
      produce data sets that conform to all the specifications presented
      here.

   1.5.  Definitions of terms and conventions used

      Byte: 8 bits stored or transmitted as a unit (same as an octet).
      For this specification, a byte is exactly 8 bits, even on machines



Deutsch                      Informational                      [Page 3]

RFC 1951      DEFLATE Compressed Data Format Specification      May 1996


      which store a character on a number of bits different from eight.
      See below, for the numbering of bits within a byte.

      String: a sequence of arbitrary bytes.

   1.6. Changes from previous versions

      There have been no technical changes to the deflate format since
      version 1.1 of this specification.  In version 1.2, some
      terminology was changed.  Version 1.3 is a conversion of the
      specification to RFC style.

2. Compressed representation overview

   A compressed data set consists of a series of blocks, corresponding
   to successive blocks of input data.  The block sizes are arbitrary,
   except that non-compressible blocks are limited to 65,535 bytes.

   Each block is compressed using a combination of the LZ77 algorithm
   and Huffman coding. The Huffman trees for each block are independent
   of those for previous or subsequent blocks; the LZ77 algorithm may
   use a reference to a duplicated string occurring in a previous block,
   up to 32K input bytes before.

   Each block consists of two parts: a pair of Huffman code trees that
   describe the representation of the compressed data part, and a
   compressed data part.  (The Huffman trees themselves are compressed
   using Huffman encoding.)  The compressed data consists of a series of
   elements of two types: literal bytes (of strings that have not been
   detected as duplicated within the previous 32K input bytes), and
   pointers to duplicated strings, where a pointer is represented as a
   pair <length, backward distance>.  The representation used in the
   "deflate" format limits distances to 32K bytes and lengths to 258
   bytes, but does not limit the size of a block, except for
   uncompressible blocks, which are limited as noted above.

   Each type of value (literals, distances, and lengths) in the
   compressed data is represented using a Huffman code, using one code
   tree for literals and lengths and a separate code tree for distances.
   The code trees for each block appear in a compact form just before
   the compressed data for that block.










Deutsch                      Informational                      [Page 4]

RFC 1951      DEFLATE Compressed Data Format Specification      May 1996


3. Detailed specification

   3.1. Overall conventions In the diagrams below, a box like this:

         +---+
         |   | <-- the vertical bars might be missing
         +---+

      represents one byte; a box like this:

         +==============+
         |              |
         +==============+

      represents a variable number of bytes.

      Bytes stored within a computer do not have a "bit order", since
      they are always treated as a unit.  However, a byte considered as
      an integer between 0 and 255 does have a most- and least-
      significant bit, and since we write numbers with the most-
      significant digit on the left, we also write bytes with the most-
      significant bit on the left.  In the diagrams below, we number the
      bits of a byte so that bit 0 is the least-significant bit, i.e.,
      the bits are numbered:

         +--------+
         |76543210|
         +--------+

      Within a computer, a number may occupy multiple bytes.  All
      multi-byte numbers in the format described here are stored with
      the least-significant byte first (at the lower memory address).
      For example, the decimal number 520 is stored as:

             0        1
         +--------+--------+
         |00001000|00000010|
         +--------+--------+
          ^        ^
          |        |
          |        + more significant byte = 2 x 256
          + less significant byte = 8

      3.1.1. Packing into bytes

         This document does not address the issue of the order in which
         bits of a byte are transmitted on a bit-sequential medium,
         since the final data format described here is byte- rather than



Deutsch                      Informational                      [Page 5]

RFC 1951      DEFLATE Compressed Data Format Specification      May 1996


         bit-oriented.  However, we describe the compressed block format
         in below, as a sequence of data elements of various bit
         lengths, not a sequence of bytes.  We must therefore specify
         how to pack these data elements into bytes to form the final
         compressed byte sequence:

             * Data elements are packed into bytes in order of
               increasing bit number within the byte, i.e., starting
               with the least-significant bit of the byte.
             * Data elements other than Huffman codes are packed
               starting with the least-significant bit of the data
               element.
             * Huffman codes are packed starting with the most-
               significant bit of the code.

         In other words, if one were to print out the compressed data as
         a sequence of bytes, starting with the first byte at the
         *right* margin and proceeding to the *left*, with the most-
         significant bit of each byte on the left as usual, one would be
         able to parse the result from right to left, with fixed-width
         elements in the correct MSB-to-LSB order and Huffman codes in
         bit-reversed order (i.e., with the first bit of the code in the
         relative LSB position).

   3.2. Compressed block format

      3.2.1. Synopsis of prefix and Huffman coding

         Prefix coding represents symbols from an a priori known
         alphabet by bit sequences (codes), one code for each symbol, in
         a manner such that different symbols may be represented by bit
         sequences of different lengths, but a parser can always parse
         an encoded string unambiguously symbol-by-symbol.

         We define a prefix code in terms of a binary tree in which the
         two edges descending from each non-leaf node are labeled 0 and
         1 and in which the leaf nodes correspond one-for-one with (are
         labeled with) the symbols of the alphabet; then the code for a
         symbol is the sequence of 0's and 1's on the edges leading from
         the root to the leaf labeled with that symbol.  For example:











Deutsch                      Informational                      [Page 6]

RFC 1951      DEFLATE Compressed Data Format Specification      May 1996


                          /\              Symbol    Code
                         0  1             ------    ----
                        /    \                A      00
                       /\     B               B       1
                      0  1                    C     011
                     /    \                   D     010
                    A     /\
                         0  1
                        /    \
                       D      C

         A parser can decode the next symbol from an encoded input
         stream by walking down the tree from the root, at each step
         choosing the edge corresponding to the next input bit.

         Given an alphabet with known symbol frequencies, the Huffman
         algorithm allows the construction of an optimal prefix code
         (one which represents strings with those symbol frequencies
         using the fewest bits of any possible prefix codes for that
         alphabet).  Such a code is called a Huffman code.  (See
         reference [1] in Chapter 5, references for additional
         information on Huffman codes.)

         Note that in the "deflate" format, the Huffman codes for the
         various alphabets must not exceed certain maximum code lengths.
         This constraint complicates the algorithm for computing code
         lengths from symbol frequencies.  Again, see Chapter 5,
         references for details.

      3.2.2. Use of Huffman coding in the "deflate" format

         The Huffman codes used for each alphabet in the "deflate"
         format have two additional rules:

             * All codes of a given bit length have lexicographically
               consecutive values, in the same order as the symbols
               they represent;

             * Shorter codes lexicographically precede longer codes.












Deutsch                      Informational                      [Page 7]

RFC 1951      DEFLATE Compressed Data Format Specification      May 1996


         We could recode the example above to follow this rule as
         follows, assuming that the order of the alphabet is ABCD:

            Symbol  Code
            ------  ----
            A       10
            B       0
            C       110
            D       111

         I.e., 0 precedes 10 which precedes 11x, and 110 and 111 are
         lexicographically consecutive.

         Given this rule, we can define the Huffman code for an alphabet
         just by giving the bit lengths of the codes for each symbol of
         the alphabet in order; this is sufficient to determine the
         actual codes.  In our example, the code is completely defined
         by the sequence of bit lengths (2, 1, 3, 3).  The following
         algorithm generates the codes as integers, intended to be read
         from most- to least-significant bit.  The code lengths are
         initially in tree[I].Len; the codes are produced in
         tree[I].Code.

         1)  Count the number of codes for each code length.  Let
             bl_count[N] be the number of codes of length N, N >= 1.

         2)  Find the numerical value of the smallest code for each
             code length:

                code = 0;
                bl_count[0] = 0;
                for (bits = 1; bits <= MAX_BITS; bits++) {
                    code = (code + bl_count[bits-1]) << 1;
                    next_code[bits] = code;
                }

         3)  Assign numerical values to all codes, using consecutive
             values for all codes of the same length with the base
             values determined at step 2. Codes that are never used
             (which have a bit length of zero) must not be assigned a
             value.

                for (n = 0;  n <= max_code; n++) {
                    len = tree[n].Len;
                    if (len != 0) {
                        tree[n].Code = next_code[len];
                        next_code[len]++;
                    }



Deutsch                      Informational                      [Page 8]

RFC 1951      DEFLATE Compressed Data Format Specification      May 1996


                }

         Example:

         Consider the alphabet ABCDEFGH, with bit lengths (3, 3, 3, 3,
         3, 2, 4, 4).  After step 1, we have:

            N      bl_count[N]
            -      -----------
            2      1
            3      5
            4      2

         Step 2 computes the following next_code values:

            N      next_code[N]
            -      ------------
            1      0
            2      0
            3      2
            4      14

         Step 3 produces the following code values:

            Symbol Length   Code
            ------ ------   ----
            A       3        010
            B       3        011
            C       3        100
            D       3        101
            E       3        110
            F       2         00
            G       4       1110
            H       4       1111

      3.2.3. Details of block format

         Each block of compressed data begins with 3 header bits
         containing the following data:

            first bit       BFINAL
            next 2 bits     BTYPE

         Note that the header bits do not necessarily begin on a byte
         boundary, since a block does not necessarily occupy an integral
         number of bytes.





Deutsch                      Informational                      [Page 9]

RFC 1951      DEFLATE Compressed Data Format Specification      May 1996


         BFINAL is set if and only if this is the last block of the data
         set.

         BTYPE specifies how the data are compressed, as follows:

            00 - no compression
            01 - compressed with fixed Huffman codes
            10 - compressed with dynamic Huffman codes
            11 - reserved (error)

         The only difference between the two compressed cases is how the
         Huffman codes for the literal/length and distance alphabets are
         defined.

         In all cases, the decoding algorithm for the actual data is as
         follows:

            do
               read block header from input stream.
               if stored with no compression
                  skip any remaining bits in current partially
                     processed byte
                  read LEN and NLEN (see next section)
                  copy LEN bytes of data to output
               otherwise
                  if compressed with dynamic Huffman codes
                     read representation of code trees (see
                        subsection below)
                  loop (until end of block code recognized)
                     decode literal/length value from input stream
                     if value < 256
                        copy value (literal byte) to output stream
                     otherwise
                        if value = end of block (256)
                           break from loop
                        otherwise (value = 257..285)
                           decode distance from input stream

                           move backwards distance bytes in the output
                           stream, and copy length bytes from this
                           position to the output stream.
                  end loop
            while not last block

         Note that a duplicated string reference may refer to a string
         in a previous block; i.e., the backward distance may cross one
         or more block boundaries.  However a distance cannot refer past
         the beginning of the output stream.  (An application using a



Deutsch                      Informational                     [Page 10]

RFC 1951      DEFLATE Compressed Data Format Specification      May 1996


         preset dictionary might discard part of the output stream; a
         distance can refer to that part of the output stream anyway)
         Note also that the referenced string may overlap the current
         position; for example, if the last 2 bytes decoded have values
         X and Y, a string reference with <length = 5, distance = 2>
         adds X,Y,X,Y,X to the output stream.

         We now specify each compression method in turn.

      3.2.4. Non-compressed blocks (BTYPE=00)

         Any bits of input up to the next byte boundary are ignored.
         The rest of the block consists of the following information:

              0   1   2   3   4...
            +---+---+---+---+================================+
            |  LEN  | NLEN  |... LEN bytes of literal data...|
            +---+---+---+---+================================+

         LEN is the number of data bytes in the block.  NLEN is the
         one's complement of LEN.

      3.2.5. Compressed blocks (length and distance codes)

         As noted above, encoded data blocks in the "deflate" format
         consist of sequences of symbols drawn from three conceptually
         distinct alphabets: either literal bytes, from the alphabet of
         byte values (0..255), or <length, backward distance> pairs,
         where the length is drawn from (3..258) and the distance is
         drawn from (1..32,768).  In fact, the literal and length
         alphabets are merged into a single alphabet (0..285), where
         values 0..255 represent literal bytes, the value 256 indicates
         end-of-block, and values 257..285 represent length codes
         (possibly in conjunction with extra bits following the symbol
         code) as follows:
















Deutsch                      Informational                     [Page 11]

RFC 1951      DEFLATE Compressed Data Format Specification      May 1996


                 Extra               Extra               Extra
            Code Bits Length(s) Code Bits Lengths   Code Bits Length(s)
            ---- ---- ------     ---- ---- -------   ---- ---- -------
             257   0     3       267   1   15,16     277   4   67-82
             258   0     4       268   1   17,18     278   4   83-98
             259   0     5       269   2   19-22     279   4   99-114
             260   0     6       270   2   23-26     280   4  115-130
             261   0     7       271   2   27-30     281   5  131-162
             262   0     8       272   2   31-34     282   5  163-194
             263   0     9       273   3   35-42     283   5  195-226
             264   0    10       274   3   43-50     284   5  227-257
             265   1  11,12      275   3   51-58     285   0    258
             266   1  13,14      276   3   59-66

         The extra bits should be interpreted as a machine integer
         stored with the most-significant bit first, e.g., bits 1110
         represent the value 14.

                  Extra           Extra               Extra
             Code Bits Dist  Code Bits   Dist     Code Bits Distance
             ---- ---- ----  ---- ----  ------    ---- ---- --------
               0   0    1     10   4     33-48    20    9   1025-1536
               1   0    2     11   4     49-64    21    9   1537-2048
               2   0    3     12   5     65-96    22   10   2049-3072
               3   0    4     13   5     97-128   23   10   3073-4096
               4   1   5,6    14   6    129-192   24   11   4097-6144
               5   1   7,8    15   6    193-256   25   11   6145-8192
               6   2   9-12   16   7    257-384   26   12  8193-12288
               7   2  13-16   17   7    385-512   27   12 12289-16384
               8   3  17-24   18   8    513-768   28   13 16385-24576
               9   3  25-32   19   8   769-1024   29   13 24577-32768

      3.2.6. Compression with fixed Huffman codes (BTYPE=01)

         The Huffman codes for the two alphabets are fixed, and are not
         represented explicitly in the data.  The Huffman code lengths
         for the literal/length alphabet are:

                   Lit Value    Bits        Codes
                   ---------    ----        -----
                     0 - 143     8          00110000 through
                                            10111111
                   144 - 255     9          110010000 through
                                            111111111
                   256 - 279     7          0000000 through
                                            0010111
                   280 - 287     8          11000000 through
                                            11000111



Deutsch                      Informational                     [Page 12]

RFC 1951      DEFLATE Compressed Data Format Specification      May 1996


         The code lengths are sufficient to generate the actual codes,
         as described above; we show the codes in the table for added
         clarity.  Literal/length values 286-287 will never actually
         occur in the compressed data, but participate in the code
         construction.

         Distance codes 0-31 are represented by (fixed-length) 5-bit
         codes, with possible additional bits as shown in the table
         shown in Paragraph 3.2.5, above.  Note that distance codes 30-
         31 will never actually occur in the compressed data.

      3.2.7. Compression with dynamic Huffman codes (BTYPE=10)

         The Huffman codes for the two alphabets appear in the block
         immediately after the header bits and before the actual
         compressed data, first the literal/length code and then the
         distance code.  Each code is defined by a sequence of code
         lengths, as discussed in Paragraph 3.2.2, above.  For even
         greater compactness, the code length sequences themselves are
         compressed using a Huffman code.  The alphabet for code lengths
         is as follows:

               0 - 15: Represent code lengths of 0 - 15
                   16: Copy the previous code length 3 - 6 times.
                       The next 2 bits indicate repeat length
                             (0 = 3, ... , 3 = 6)
                          Example:  Codes 8, 16 (+2 bits 11),
                                    16 (+2 bits 10) will expand to
                                    12 code lengths of 8 (1 + 6 + 5)
                   17: Repeat a code length of 0 for 3 - 10 times.
                       (3 bits of length)
                   18: Repeat a code length of 0 for 11 - 138 times
                       (7 bits of length)

         A code length of 0 indicates that the corresponding symbol in
         the literal/length or distance alphabet will not occur in the
         block, and should not participate in the Huffman code
         construction algorithm given earlier.  If only one distance
         code is used, it is encoded using one bit, not zero bits; in
         this case there is a single code length of one, with one unused
         code.  One distance code of zero bits means that there are no
         distance codes used at all (the data is all literals).

         We can now define the format of the block:

               5 Bits: HLIT, # of Literal/Length codes - 257 (257 - 286)
               5 Bits: HDIST, # of Distance codes - 1        (1 - 32)
               4 Bits: HCLEN, # of Code Length codes - 4     (4 - 19)



Deutsch                      Informational                     [Page 13]

RFC 1951      DEFLATE Compressed Data Format Specification      May 1996


               (HCLEN + 4) x 3 bits: code lengths for the code length
                  alphabet given just above, in the order: 16, 17, 18,
                  0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15

                  These code lengths are interpreted as 3-bit integers
                  (0-7); as above, a code length of 0 means the
                  corresponding symbol (literal/length or distance code
                  length) is not used.

               HLIT + 257 code lengths for the literal/length alphabet,
                  encoded using the code length Huffman code

               HDIST + 1 code lengths for the distance alphabet,
                  encoded using the code length Huffman code

               The actual compressed data of the block,
                  encoded using the literal/length and distance Huffman
                  codes

               The literal/length symbol 256 (end of data),
                  encoded using the literal/length Huffman code

         The code length repeat codes can cross from HLIT + 257 to the
         HDIST + 1 code lengths.  In other words, all code lengths form
         a single sequence of HLIT + HDIST + 258 values.

   3.3. Compliance

      A compressor may limit further the ranges of values specified in
      the previous section and still be compliant; for example, it may
      limit the range of backward pointers to some value smaller than
      32K.  Similarly, a compressor may limit the size of blocks so that
      a compressible block fits in memory.

      A compliant decompressor must accept the full range of possible
      values defined in the previous section, and must accept blocks of
      arbitrary size.

4. Compression algorithm details

   While it is the intent of this document to define the "deflate"
   compressed data format without reference to any particular
   compression algorithm, the format is related to the compressed
   formats produced by LZ77 (Lempel-Ziv 1977, see reference [2] below);
   since many variations of LZ77 are patented, it is strongly
   recommended that the implementor of a compressor follow the general
   algorithm presented here, which is known not to be patented per se.
   The material in this section is not part of the definition of the



Deutsch                      Informational                     [Page 14]

RFC 1951      DEFLATE Compressed Data Format Specification      May 1996


   specification per se, and a compressor need not follow it in order to
   be compliant.

   The compressor terminates a block when it determines that starting a
   new block with fresh trees would be useful, or when the block size
   fills up the compressor's block buffer.

   The compressor uses a chained hash table to find duplicated strings,
   using a hash function that operates on 3-byte sequences.  At any
   given point during compression, let XYZ be the next 3 input bytes to
   be examined (not necessarily all different, of course).  First, the
   compressor examines the hash chain for XYZ.  If the chain is empty,
   the compressor simply writes out X as a literal byte and advances one
   byte in the input.  If the hash chain is not empty, indicating that
   the sequence XYZ (or, if we are unlucky, some other 3 bytes with the
   same hash function value) has occurred recently, the compressor
   compares all strings on the XYZ hash chain with the actual input data
   sequence starting at the current point, and selects the longest
   match.

   The compressor searches the hash chains starting with the most recent
   strings, to favor small distances and thus take advantage of the
   Huffman encoding.  The hash chains are singly linked. There are no
   deletions from the hash chains; the algorithm simply discards matches
   that are too old.  To avoid a worst-case situation, very long hash
   chains are arbitrarily truncated at a certain length, determined by a
   run-time parameter.

   To improve overall compression, the compressor optionally defers the
   selection of matches ("lazy matching"): after a match of length N has
   been found, the compressor searches for a longer match starting at
   the next input byte.  If it finds a longer match, it truncates the
   previous match to a length of one (thus producing a single literal
   byte) and then emits the longer match.  Otherwise, it emits the
   original match, and, as described above, advances N bytes before
   continuing.

   Run-time parameters also control this "lazy match" procedure.  If
   compression ratio is most important, the compressor attempts a
   complete second search regardless of the length of the first match.
   In the normal case, if the current match is "long enough", the
   compressor reduces the search for a longer match, thus speeding up
   the process.  If speed is most important, the compressor inserts new
   strings in the hash table only when no match was found, or when the
   match is not "too long".  This degrades the compression ratio but
   saves time since there are both fewer insertions and fewer searches.





Deutsch                      Informational                     [Page 15]

RFC 1951      DEFLATE Compressed Data Format Specification      May 1996


5. References

   [1] Huffman, D. A., "A Method for the Construction of Minimum
       Redundancy Codes", Proceedings of the Institute of Radio
       Engineers, September 1952, Volume 40, Number 9, pp. 1098-1101.

   [2] Ziv J., Lempel A., "A Universal Algorithm for Sequential Data
       Compression", IEEE Transactions on Information Theory, Vol. 23,
       No. 3, pp. 337-343.

   [3] Gailly, J.-L., and Adler, M., ZLIB documentation and sources,
       available in ftp://ftp.uu.net/pub/archiving/zip/doc/

   [4] Gailly, J.-L., and Adler, M., GZIP documentation and sources,
       available as gzip-*.tar in ftp://prep.ai.mit.edu/pub/gnu/

   [5] Schwartz, E. S., and Kallick, B. "Generating a canonical prefix
       encoding." Comm. ACM, 7,3 (Mar. 1964), pp. 166-169.

   [6] Hirschberg and Lelewer, "Efficient decoding of prefix codes,"
       Comm. ACM, 33,4, April 1990, pp. 449-459.

6. Security Considerations

   Any data compression method involves the reduction of redundancy in
   the data.  Consequently, any corruption of the data is likely to have
   severe effects and be difficult to correct.  Uncompressed text, on
   the other hand, will probably still be readable despite the presence
   of some corrupted bytes.

   It is recommended that systems using this data format provide some
   means of validating the integrity of the compressed data.  See
   reference [3], for example.

7. Source code

   Source code for a C language implementation of a "deflate" compliant
   compressor and decompressor is available within the zlib package at
   ftp://ftp.uu.net/pub/archiving/zip/zlib/.

8. Acknowledgements

   Trademarks cited in this document are the property of their
   respective owners.

   Phil Katz designed the deflate format.  Jean-Loup Gailly and Mark
   Adler wrote the related software described in this specification.
   Glenn Randers-Pehrson converted this document to RFC and HTML format.



Deutsch                      Informational                     [Page 16]

RFC 1951      DEFLATE Compressed Data Format Specification      May 1996


9. Author's Address

   L. Peter Deutsch
   Aladdin Enterprises
   203 Santa Margarita Ave.
   Menlo Park, CA 94025

   Phone: (415) 322-0103 (AM only)
   FAX:   (415) 322-1734
   EMail: <ghost@aladdin.com>

   Questions about the technical content of this specification can be
   sent by email to:

   Jean-Loup Gailly <gzip@prep.ai.mit.edu> and
   Mark Adler <madler@alumni.caltech.edu>

   Editorial comments on this specification can be sent by email to:

   L. Peter Deutsch <ghost@aladdin.com> and
   Glenn Randers-Pehrson <randeg@alumni.rpi.edu>






























Deutsch                      Informational                     [Page 17]


Network Working Group                                         P. Deutsch
Request for Comments: 1952                           Aladdin Enterprises
Category: Informational                                         May 1996


               GZIP file format specification version 4.3

Status of This Memo

   This memo provides information for the Internet community.  This memo
   does not specify an Internet standard of any kind.  Distribution of
   this memo is unlimited.

IESG Note:

   The IESG takes no position on the validity of any Intellectual
   Property Rights statements contained in this document.

Notices

   Copyright (c) 1996 L. Peter Deutsch

   Permission is granted to copy and distribute this document for any
   purpose and without charge, including translations into other
   languages and incorporation into compilations, provided that the
   copyright notice and this notice are preserved, and that any
   substantive changes or deletions from the original are clearly
   marked.

   A pointer to the latest version of this and related documentation in
   HTML format can be found at the URL
   <ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html>.

Abstract

   This specification defines a lossless compressed data format that is
   compatible with the widely used GZIP utility.  The format includes a
   cyclic redundancy check value for detecting data corruption.  The
   format presently uses the DEFLATE method of compression but can be
   easily extended to use other compression methods.  The format can be
   implemented readily in a manner not covered by patents.










Deutsch                      Informational                      [Page 1]

RFC 1952             GZIP File Format Specification             May 1996


Table of Contents

   1. Introduction ................................................... 2
      1.1. Purpose ................................................... 2
      1.2. Intended audience ......................................... 3
      1.3. Scope ..................................................... 3
      1.4. Compliance ................................................ 3
      1.5. Definitions of terms and conventions used ................. 3
      1.6. Changes from previous versions ............................ 3
   2. Detailed specification ......................................... 4
      2.1. Overall conventions ....................................... 4
      2.2. File format ............................................... 5
      2.3. Member format ............................................. 5
          2.3.1. Member header and trailer ........................... 6
              2.3.1.1. Extra field ................................... 8
              2.3.1.2. Compliance .................................... 9
      3. References .................................................. 9
      4. Security Considerations .................................... 10
      5. Acknowledgements ........................................... 10
      6. Author's Address ........................................... 10
      7. Appendix: Jean-Loup Gailly's gzip utility .................. 11
      8. Appendix: Sample CRC Code .................................. 11

1. Introduction

   1.1. Purpose

      The purpose of this specification is to define a lossless
      compressed data format that:

          * Is independent of CPU type, operating system, file system,
            and character set, and hence can be used for interchange;
          * Can compress or decompress a data stream (as opposed to a
            randomly accessible file) to produce another data stream,
            using only an a priori bounded amount of intermediate
            storage, and hence can be used in data communications or
            similar structures such as Unix filters;
          * Compresses data with efficiency comparable to the best
            currently available general-purpose compression methods,
            and in particular considerably better than the "compress"
            program;
          * Can be implemented readily in a manner not covered by
            patents, and hence can be practiced freely;
          * Is compatible with the file format produced by the current
            widely used gzip utility, in that conforming decompressors
            will be able to read data produced by the existing gzip
            compressor.




Deutsch                      Informational                      [Page 2]

RFC 1952             GZIP File Format Specification             May 1996


      The data format defined by this specification does not attempt to:

          * Provide random access to compressed data;
          * Compress specialized data (e.g., raster graphics) as well as
            the best currently available specialized algorithms.

   1.2. Intended audience

      This specification is intended for use by implementors of software
      to compress data into gzip format and/or decompress data from gzip
      format.

      The text of the specification assumes a basic background in
      programming at the level of bits and other primitive data
      representations.

   1.3. Scope

      The specification specifies a compression method and a file format
      (the latter assuming only that a file can store a sequence of
      arbitrary bytes).  It does not specify any particular interface to
      a file system or anything about character sets or encodings
      (except for file names and comments, which are optional).

   1.4. Compliance

      Unless otherwise indicated below, a compliant decompressor must be
      able to accept and decompress any file that conforms to all the
      specifications presented here; a compliant compressor must produce
      files that conform to all the specifications presented here.  The
      material in the appendices is not part of the specification per se
      and is not relevant to compliance.

   1.5. Definitions of terms and conventions used

      byte: 8 bits stored or transmitted as a unit (same as an octet).
      (For this specification, a byte is exactly 8 bits, even on
      machines which store a character on a number of bits different
      from 8.)  See below for the numbering of bits within a byte.

   1.6. Changes from previous versions

      There have been no technical changes to the gzip format since
      version 4.1 of this specification.  In version 4.2, some
      terminology was changed, and the sample CRC code was rewritten for
      clarity and to eliminate the requirement for the caller to do pre-
      and post-conditioning.  Version 4.3 is a conversion of the
      specification to RFC style.



Deutsch                      Informational                      [Page 3]

RFC 1952             GZIP File Format Specification             May 1996


2. Detailed specification

   2.1. Overall conventions

      In the diagrams below, a box like this:

         +---+
         |   | <-- the vertical bars might be missing
         +---+

      represents one byte; a box like this:

         +==============+
         |              |
         +==============+

      represents a variable number of bytes.

      Bytes stored within a computer do not have a "bit order", since
      they are always treated as a unit.  However, a byte considered as
      an integer between 0 and 255 does have a most- and least-
      significant bit, and since we write numbers with the most-
      significant digit on the left, we also write bytes with the most-
      significant bit on the left.  In the diagrams below, we number the
      bits of a byte so that bit 0 is the least-significant bit, i.e.,
      the bits are numbered:

         +--------+
         |76543210|
         +--------+

      This document does not address the issue of the order in which
      bits of a byte are transmitted on a bit-sequential medium, since
      the data format described here is byte- rather than bit-oriented.

      Within a computer, a number may occupy multiple bytes.  All
      multi-byte numbers in the format described here are stored with
      the least-significant byte first (at the lower memory address).
      For example, the decimal number 520 is stored as:

             0        1
         +--------+--------+
         |00001000|00000010|
         +--------+--------+
          ^        ^
          |        |
          |        + more significant byte = 2 x 256
          + less significant byte = 8



Deutsch                      Informational                      [Page 4]

RFC 1952             GZIP File Format Specification             May 1996


   2.2. File format

      A gzip file consists of a series of "members" (compressed data
      sets).  The format of each member is specified in the following
      section.  The members simply appear one after another in the file,
      with no additional information before, between, or after them.

   2.3. Member format

      Each member has the following structure:

         +---+---+---+---+---+---+---+---+---+---+
         |ID1|ID2|CM |FLG|     MTIME     |XFL|OS | (more-->)
         +---+---+---+---+---+---+---+---+---+---+

      (if FLG.FEXTRA set)

         +---+---+=================================+
         | XLEN  |...XLEN bytes of "extra field"...| (more-->)
         +---+---+=================================+

      (if FLG.FNAME set)

         +=========================================+
         |...original file name, zero-terminated...| (more-->)
         +=========================================+

      (if FLG.FCOMMENT set)

         +===================================+
         |...file comment, zero-terminated...| (more-->)
         +===================================+

      (if FLG.FHCRC set)

         +---+---+
         | CRC16 |
         +---+---+

         +=======================+
         |...compressed blocks...| (more-->)
         +=======================+

           0   1   2   3   4   5   6   7
         +---+---+---+---+---+---+---+---+
         |     CRC32     |     ISIZE     |
         +---+---+---+---+---+---+---+---+




Deutsch                      Informational                      [Page 5]

RFC 1952             GZIP File Format Specification             May 1996


      2.3.1. Member header and trailer

         ID1 (IDentification 1)
         ID2 (IDentification 2)
            These have the fixed values ID1 = 31 (0x1f, \037), ID2 = 139
            (0x8b, \213), to identify the file as being in gzip format.

         CM (Compression Method)
            This identifies the compression method used in the file.  CM
            = 0-7 are reserved.  CM = 8 denotes the "deflate"
            compression method, which is the one customarily used by
            gzip and which is documented elsewhere.

         FLG (FLaGs)
            This flag byte is divided into individual bits as follows:

               bit 0   FTEXT
               bit 1   FHCRC
               bit 2   FEXTRA
               bit 3   FNAME
               bit 4   FCOMMENT
               bit 5   reserved
               bit 6   reserved
               bit 7   reserved

            If FTEXT is set, the file is probably ASCII text.  This is
            an optional indication, which the compressor may set by
            checking a small amount of the input data to see whether any
            non-ASCII characters are present.  In case of doubt, FTEXT
            is cleared, indicating binary data. For systems which have
            different file formats for ascii text and binary data, the
            decompressor can use FTEXT to choose the appropriate format.
            We deliberately do not specify the algorithm used to set
            this bit, since a compressor always has the option of
            leaving it cleared and a decompressor always has the option
            of ignoring it and letting some other program handle issues
            of data conversion.

            If FHCRC is set, a CRC16 for the gzip header is present,
            immediately before the compressed data. The CRC16 consists
            of the two least significant bytes of the CRC32 for all
            bytes of the gzip header up to and not including the CRC16.
            [The FHCRC bit was never set by versions of gzip up to
            1.2.4, even though it was documented with a different
            meaning in gzip 1.2.4.]

            If FEXTRA is set, optional extra fields are present, as
            described in a following section.



Deutsch                      Informational                      [Page 6]

RFC 1952             GZIP File Format Specification             May 1996


            If FNAME is set, an original file name is present,
            terminated by a zero byte.  The name must consist of ISO
            8859-1 (LATIN-1) characters; on operating systems using
            EBCDIC or any other character set for file names, the name
            must be translated to the ISO LATIN-1 character set.  This
            is the original name of the file being compressed, with any
            directory components removed, and, if the file being
            compressed is on a file system with case insensitive names,
            forced to lower case. There is no original file name if the
            data was compressed from a source other than a named file;
            for example, if the source was stdin on a Unix system, there
            is no file name.

            If FCOMMENT is set, a zero-terminated file comment is
            present.  This comment is not interpreted; it is only
            intended for human consumption.  The comment must consist of
            ISO 8859-1 (LATIN-1) characters.  Line breaks should be
            denoted by a single line feed character (10 decimal).

            Reserved FLG bits must be zero.

         MTIME (Modification TIME)
            This gives the most recent modification time of the original
            file being compressed.  The time is in Unix format, i.e.,
            seconds since 00:00:00 GMT, Jan.  1, 1970.  (Note that this
            may cause problems for MS-DOS and other systems that use
            local rather than Universal time.)  If the compressed data
            did not come from a file, MTIME is set to the time at which
            compression started.  MTIME = 0 means no time stamp is
            available.

         XFL (eXtra FLags)
            These flags are available for use by specific compression
            methods.  The "deflate" method (CM = 8) sets these flags as
            follows:

               XFL = 2 - compressor used maximum compression,
                         slowest algorithm
               XFL = 4 - compressor used fastest algorithm

         OS (Operating System)
            This identifies the type of file system on which compression
            took place.  This may be useful in determining end-of-line
            convention for text files.  The currently defined values are
            as follows:






Deutsch                      Informational                      [Page 7]

RFC 1952             GZIP File Format Specification             May 1996


                 0 - FAT filesystem (MS-DOS, OS/2, NT/Win32)
                 1 - Amiga
                 2 - VMS (or OpenVMS)
                 3 - Unix
                 4 - VM/CMS
                 5 - Atari TOS
                 6 - HPFS filesystem (OS/2, NT)
                 7 - Macintosh
                 8 - Z-System
                 9 - CP/M
                10 - TOPS-20
                11 - NTFS filesystem (NT)
                12 - QDOS
                13 - Acorn RISCOS
               255 - unknown

         XLEN (eXtra LENgth)
            If FLG.FEXTRA is set, this gives the length of the optional
            extra field.  See below for details.

         CRC32 (CRC-32)
            This contains a Cyclic Redundancy Check value of the
            uncompressed data computed according to CRC-32 algorithm
            used in the ISO 3309 standard and in section 8.1.1.6.2 of
            ITU-T recommendation V.42.  (See http://www.iso.ch for
            ordering ISO documents. See gopher://info.itu.ch for an
            online version of ITU-T V.42.)

         ISIZE (Input SIZE)
            This contains the size of the original (uncompressed) input
            data modulo 2^32.

      2.3.1.1. Extra field

         If the FLG.FEXTRA bit is set, an "extra field" is present in
         the header, with total length XLEN bytes.  It consists of a
         series of subfields, each of the form:

            +---+---+---+---+==================================+
            |SI1|SI2|  LEN  |... LEN bytes of subfield data ...|
            +---+---+---+---+==================================+

         SI1 and SI2 provide a subfield ID, typically two ASCII letters
         with some mnemonic value.  Jean-Loup Gailly
         <gzip@prep.ai.mit.edu> is maintaining a registry of subfield
         IDs; please send him any subfield ID you wish to use.  Subfield
         IDs with SI2 = 0 are reserved for future use.  The following
         IDs are currently defined:



Deutsch                      Informational                      [Page 8]

RFC 1952             GZIP File Format Specification             May 1996


            SI1         SI2         Data
            ----------  ----------  ----
            0x41 ('A')  0x70 ('P')  Apollo file type information

         LEN gives the length of the subfield data, excluding the 4
         initial bytes.

      2.3.1.2. Compliance

         A compliant compressor must produce files with correct ID1,
         ID2, CM, CRC32, and ISIZE, but may set all the other fields in
         the fixed-length part of the header to default values (255 for
         OS, 0 for all others).  The compressor must set all reserved
         bits to zero.

         A compliant decompressor must check ID1, ID2, and CM, and
         provide an error indication if any of these have incorrect
         values.  It must examine FEXTRA/XLEN, FNAME, FCOMMENT and FHCRC
         at least so it can skip over the optional fields if they are
         present.  It need not examine any other part of the header or
         trailer; in particular, a decompressor may ignore FTEXT and OS
         and always produce binary output, and still be compliant.  A
         compliant decompressor must give an error indication if any
         reserved bit is non-zero, since such a bit could indicate the
         presence of a new field that would cause subsequent data to be
         interpreted incorrectly.

3. References

   [1] "Information Processing - 8-bit single-byte coded graphic
       character sets - Part 1: Latin alphabet No.1" (ISO 8859-1:1987).
       The ISO 8859-1 (Latin-1) character set is a superset of 7-bit
       ASCII. Files defining this character set are available as
       iso_8859-1.* in ftp://ftp.uu.net/graphics/png/documents/

   [2] ISO 3309

   [3] ITU-T recommendation V.42

   [4] Deutsch, L.P.,"DEFLATE Compressed Data Format Specification",
       available in ftp://ftp.uu.net/pub/archiving/zip/doc/

   [5] Gailly, J.-L., GZIP documentation, available as gzip-*.tar in
       ftp://prep.ai.mit.edu/pub/gnu/

   [6] Sarwate, D.V., "Computation of Cyclic Redundancy Checks via Table
       Look-Up", Communications of the ACM, 31(8), pp.1008-1013.




Deutsch                      Informational                      [Page 9]

RFC 1952             GZIP File Format Specification             May 1996


   [7] Schwaderer, W.D., "CRC Calculation", April 85 PC Tech Journal,
       pp.118-133.

   [8] ftp://ftp.adelaide.edu.au/pub/rocksoft/papers/crc_v3.txt,
       describing the CRC concept.

4. Security Considerations

   Any data compression method involves the reduction of redundancy in
   the data.  Consequently, any corruption of the data is likely to have
   severe effects and be difficult to correct.  Uncompressed text, on
   the other hand, will probably still be readable despite the presence
   of some corrupted bytes.

   It is recommended that systems using this data format provide some
   means of validating the integrity of the compressed data, such as by
   setting and checking the CRC-32 check value.

5. Acknowledgements

   Trademarks cited in this document are the property of their
   respective owners.

   Jean-Loup Gailly designed the gzip format and wrote, with Mark Adler,
   the related software described in this specification.  Glenn
   Randers-Pehrson converted this document to RFC and HTML format.

6. Author's Address

   L. Peter Deutsch
   Aladdin Enterprises
   203 Santa Margarita Ave.
   Menlo Park, CA 94025

   Phone: (415) 322-0103 (AM only)
   FAX:   (415) 322-1734
   EMail: <ghost@aladdin.com>

   Questions about the technical content of this specification can be
   sent by email to:

   Jean-Loup Gailly <gzip@prep.ai.mit.edu> and
   Mark Adler <madler@alumni.caltech.edu>

   Editorial comments on this specification can be sent by email to:

   L. Peter Deutsch <ghost@aladdin.com> and
   Glenn Randers-Pehrson <randeg@alumni.rpi.edu>



Deutsch                      Informational                     [Page 10]

RFC 1952             GZIP File Format Specification             May 1996


7. Appendix: Jean-Loup Gailly's gzip utility

   The most widely used implementation of gzip compression, and the
   original documentation on which this specification is based, were
   created by Jean-Loup Gailly <gzip@prep.ai.mit.edu>.  Since this
   implementation is a de facto standard, we mention some more of its
   features here.  Again, the material in this section is not part of
   the specification per se, and implementations need not follow it to
   be compliant.

   When compressing or decompressing a file, gzip preserves the
   protection, ownership, and modification time attributes on the local
   file system, since there is no provision for representing protection
   attributes in the gzip file format itself.  Since the file format
   includes a modification time, the gzip decompressor provides a
   command line switch that assigns the modification time from the file,
   rather than the local modification time of the compressed input, to
   the decompressed output.

8. Appendix: Sample CRC Code

   The following sample code represents a practical implementation of
   the CRC (Cyclic Redundancy Check). (See also ISO 3309 and ITU-T V.42
   for a formal specification.)

   The sample code is in the ANSI C programming language. Non C users
   may find it easier to read with these hints:

      &      Bitwise AND operator.
      ^      Bitwise exclusive-OR operator.
      >>     Bitwise right shift operator. When applied to an
             unsigned quantity, as here, right shift inserts zero
             bit(s) at the left.
      !      Logical NOT operator.
      ++     "n++" increments the variable n.
      0xNNN  0x introduces a hexadecimal (base 16) constant.
             Suffix L indicates a long value (at least 32 bits).

      /* Table of CRCs of all 8-bit messages. */
      unsigned long crc_table[256];

      /* Flag: has the table been computed? Initially false. */
      int crc_table_computed = 0;

      /* Make the table for a fast CRC. */
      void make_crc_table(void)
      {
        unsigned long c;



Deutsch                      Informational                     [Page 11]

RFC 1952             GZIP File Format Specification             May 1996


        int n, k;
        for (n = 0; n < 256; n++) {
          c = (unsigned long) n;
          for (k = 0; k < 8; k++) {
            if (c & 1) {
              c = 0xedb88320L ^ (c >> 1);
            } else {
              c = c >> 1;
            }
          }
          crc_table[n] = c;
        }
        crc_table_computed = 1;
      }

      /*
         Update a running crc with the bytes buf[0..len-1] and return
       the updated crc. The crc should be initialized to zero. Pre- and
       post-conditioning (one's complement) is performed within this
       function so it shouldn't be done by the caller. Usage example:

         unsigned long crc = 0L;

         while (read_buffer(buffer, length) != EOF) {
           crc = update_crc(crc, buffer, length);
         }
         if (crc != original_crc) error();
      */
      unsigned long update_crc(unsigned long crc,
                      unsigned char *buf, int len)
      {
        unsigned long c = crc ^ 0xffffffffL;
        int n;

        if (!crc_table_computed)
          make_crc_table();
        for (n = 0; n < len; n++) {
          c = crc_table[(c ^ buf[n]) & 0xff] ^ (c >> 8);
        }
        return c ^ 0xffffffffL;
      }

      /* Return the CRC of the bytes buf[0..len-1]. */
      unsigned long crc(unsigned char *buf, int len)
      {
        return update_crc(0L, buf, len);
      }




Deutsch                      Informational                     [Page 12]


A Fast Method for Identifying Plain Text Files
==============================================


Introduction
------------

Given a file coming from an unknown source, it is sometimes desirable
to find out whether the format of that file is plain text.  Although
this may appear like a simple task, a fully accurate detection of the
file type requires heavy-duty semantic analysis on the file contents.
It is, however, possible to obtain satisfactory results by employing
various heuristics.

Previous versions of PKZip and other zip-compatible compression tools
were using a crude detection scheme: if more than 80% (4/5) of the bytes
found in a certain buffer are within the range [7..127], the file is
labeled as plain text, otherwise it is labeled as binary.  A prominent
limitation of this scheme is the restriction to Latin-based alphabets.
Other alphabets, like Greek, Cyrillic or Asian, make extensive use of
the bytes within the range [128..255], and texts using these alphabets
are most often misidentified by this scheme; in other words, the rate
of false negatives is sometimes too high, which means that the recall
is low.  Another weakness of this scheme is a reduced precision, due to
the false positives that may occur when binary files containing large
amounts of textual characters are misidentified as plain text.

In this article we propose a new, simple detection scheme that features
a much increased precision and a near-100% recall.  This scheme is
designed to work on ASCII, Unicode and other ASCII-derived alphabets,
and it handles single-byte encodings (ISO-8859, MacRoman, KOI8, etc.)
and variable-sized encodings (ISO-2022, UTF-8, etc.).  Wider encodings
(UCS-2/UTF-16 and UCS-4/UTF-32) are not handled, however.


The Algorithm
-------------

The algorithm works by dividing the set of bytecodes [0..255] into three
categories:
- The white list of textual bytecodes:
  9 (TAB), 10 (LF), 13 (CR), 32 (SPACE) to 255.
- The gray list of tolerated bytecodes:
  7 (BEL), 8 (BS), 11 (VT), 12 (FF), 26 (SUB), 27 (ESC).
- The black list of undesired, non-textual bytecodes:
  0 (NUL) to 6, 14 to 31.

If a file contains at least one byte that belongs to the white list and
no byte that belongs to the black list, then the file is categorized as
plain text; otherwise, it is categorized as binary.  (The boundary case,
when the file is empty, automatically falls into the latter category.)


Rationale
---------

The idea behind this algorithm relies on two observations.

The first observation is that, although the full range of 7-bit codes
[0..127] is properly specified by the ASCII standard, most control
characters in the range [0..31] are not used in practice.  The only
widely-used, almost universally-portable control codes are 9 (TAB),
10 (LF) and 13 (CR).  There are a few more control codes that are
recognized on a reduced range of platforms and text viewers/editors:
7 (BEL), 8 (BS), 11 (VT), 12 (FF), 26 (SUB) and 27 (ESC); but these
codes are rarely (if ever) used alone, without being accompanied by
some printable text.  Even the newer, portable text formats such as
XML avoid using control characters outside the list mentioned here.

The second observation is that most of the binary files tend to contain
control characters, especially 0 (NUL).  Even though the older text
detection schemes observe the presence of non-ASCII codes from the range
[128..255], the precision rarely has to suffer if this upper range is
labeled as textual, because the files that are genuinely binary tend to
contain both control characters and codes from the upper range.  On the
other hand, the upper range needs to be labeled as textual, because it
is used by virtually all ASCII extensions.  In particular, this range is
used for encoding non-Latin scripts.

Since there is no counting involved, other than simply observing the
presence or the absence of some byte values, the algorithm produces
consistent results, regardless what alphabet encoding is being used.
(If counting were involved, it could be possible to obtain different
results on a text encoded, say, using ISO-8859-16 versus UTF-8.)

There is an extra category of plain text files that are "polluted" with
one or more black-listed codes, either by mistake or by peculiar design
considerations.  In such cases, a scheme that tolerates a small fraction
of black-listed codes would provide an increased recall (i.e. more true
positives).  This, however, incurs a reduced precision overall, since
false positives are more likely to appear in binary files that contain
large chunks of textual data.  Furthermore, "polluted" plain text should
be regarded as binary by general-purpose text detection schemes, because
general-purpose text processing algorithms might not be applicable.
Under this premise, it is safe to say that our detection method provides
a near-100% recall.

Experiments have been run on many files coming from various platforms
and applications.  We tried plain text files, system logs, source code,
formatted office documents, compiled object code, etc.  The results
confirm the optimistic assumptions about the capabilities of this
algorithm.


--
Cosmin Truta
Last updated: 2006-May-28

/* gzlib.c -- zlib functions common to reading and writing gzip files
 * Copyright (C) 2004, 2010, 2011, 2012, 2013, 2016 Mark Adler
 * Copyright (C) 2004-2017 Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

#include "gzguts.h"

#if defined(_WIN32) && !defined(__BORLANDC__) && !defined(__MINGW32__)
#  define LSEEK _lseeki64

        if (len)
            wcstombs(state->path, path, len + 1);
        else
            *(state->path) = 0;
    else
#endif
#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
        snprintf(state->path, len + 1, "%s", (const char *)path);
        (void)snprintf(state->path, len + 1, "%s", (const char *)path);
#else
        strcpy(state->path, path);
#endif

    /* compute the flags for open() */
    oflag =
#ifdef O_LARGEFILE

{
    char *path;         /* identifier for error messages */
    gzFile gz;

    if (fd == -1 || (path = (char *)malloc(7 + 3 * sizeof(int))) == NULL)
        return NULL;
#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
    snprintf(path, 7 + 3 * sizeof(int), "<fd:%d>", fd); /* for debugging */
    (void)snprintf(path, 7 + 3 * sizeof(int), "<fd:%d>", fd);
#else
    sprintf(path, "<fd:%d>", fd);   /* for debugging */
#endif
    gz = gz_open(path, fd, mode);
    free(path);
    return gz;
}

    /* construct error message with path */
    if ((state->msg = (char *)malloc(strlen(state->path) + strlen(msg) + 3)) ==
            NULL) {
        state->err = Z_MEM_ERROR;
        return;
    }
#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
    snprintf(state->msg, strlen(state->path) + strlen(msg) + 3,
             "%s%s%s", state->path, ": ", msg);
    (void)snprintf(state->msg, strlen(state->path) + strlen(msg) + 3,
                   "%s%s%s", state->path, ": ", msg);
#else
    strcpy(state->msg, state->path);
    strcat(state->msg, ": ");
    strcat(state->msg, msg);
#endif
}

/* gzwrite.c -- zlib functions for writing gzip files
 * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013, 2016 Mark Adler
 * Copyright (C) 2004-2017 Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

#include "gzguts.h"

/* Local functions */
local int gz_init OF((gz_statep));

                    return -1;
                }
                state->x.next += writ;
            }
            if (strm->avail_out == 0) {
                strm->avail_out = state->size;
                strm->next_out = state->out;
                state->x.next = state->out;
            }
        }

        /* compress */
        have = strm->avail_out;
        ret = deflate(strm, flush);
        if (ret == Z_STREAM_ERROR) {

/* inffast.c -- fast decoding
 * Copyright (C) 1995-2008, 2010, 2013, 2016 Mark Adler
 * Copyright (C) 1995-2017 Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

#include "zutil.h"
#include "inftrees.h"
#include "inflate.h"
#include "inffast.h"

#ifndef ASMINF
#ifdef ASMINF
#  pragma message("Assembler code may have bugs -- use at your own risk")
#else

/*
   Decode literal, length, and distance codes and write out the resulting
   literal and match bytes until either not enough input or output is
   available, an end-of-block is encountered, or a data error is encountered.
   When large enough input and output buffers are supplied to inflate(), for
   example, a 16K input buffer and a 64K output buffer, more than 95% of the

/* inftrees.c -- generate Huffman trees for efficient decoding
 * Copyright (C) 1995-2016 Mark Adler
 * Copyright (C) 1995-2017 Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

#include "zutil.h"
#include "inftrees.h"

#define MAXBITS 15

const char inflate_copyright[] =
   " inflate 1.2.9 Copyright 1995-2016 Mark Adler ";
   " inflate 1.2.11 Copyright 1995-2017 Mark Adler ";
/*
  If you use the zlib library in a product, an acknowledgment is welcome
  in the documentation of your product. If for some reason you cannot
  include such an acknowledgment, I would appreciate that you keep this
  copyright string in the executable of your product.
 */

    unsigned short count[MAXBITS+1];    /* number of codes of each length */
    unsigned short offs[MAXBITS+1];     /* offsets in table for each length */
    static const unsigned short lbase[31] = { /* Length codes 257..285 base */
        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
    static const unsigned short lext[31] = { /* Length codes 257..285 extra */
        16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 192, 79};
        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 77, 202};
    static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
        8193, 12289, 16385, 24577, 0, 0};
    static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
        16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
        23, 23, 24, 24, 25, 25, 26, 26, 27, 27,

        ZLIB version 1.2.9 for OS/400 installation instructions
        ZLIB version 1.2.11 for OS/400 installation instructions

1) Download and unpack the zlib tarball to some IFS directory.
   (i.e.: /path/to/the/zlib/ifs/source/directory)

   If the installed IFS command suppors gzip format, this is straightforward,
else you have to unpack first to some directory on a system supporting it,
then move the whole directory to the IFS via the network (via SMB or FTP).

#      Create and compile the identification source file.

echo '#pragma comment(user, "ZLIB version '"${VERSION}"'")' > os400.c
echo '#pragma comment(user, __DATE__)' >> os400.c
echo '#pragma comment(user, __TIME__)' >> os400.c
echo '#pragma comment(copyright, "Copyright (C) 1995-2016 Jean-Loup Gailly, Mark Adler. OS/400 version by P. Monnerat.")' >> os400.c
echo '#pragma comment(copyright, "Copyright (C) 1995-2017 Jean-Loup Gailly, Mark Adler. OS/400 version by P. Monnerat.")' >> os400.c
make_module     OS400           os400.c
LINK=                           # No need to rebuild service program yet.
MODULES=


#       Get source list.

      *  ZLIB.INC - Interface to the general purpose compression library
      *
      *  ILE RPG400 version by Patrick Monnerat, DATASPHERE.
      *  Version 1.2.9
      *  Version 1.2.11
      *
      *
      *  WARNING:
      *     Procedures inflateInit(), inflateInit2(), deflateInit(),
      *         deflateInit2() and inflateBackInit() need to be called with
      *         two additional arguments:
      *         the package version string and the stream control structure.
      *         size. This is needed because RPG lacks some macro feature.
      *         Call these procedures as:
      *             inflateInit(...: ZLIB_VERSION: %size(z_stream))
      *
      /if not defined(ZLIB_H_)
      /define ZLIB_H_
      *
      **************************************************************************
      *                               Constants
      **************************************************************************
      *
      *  Versioning information.
      *
     D ZLIB_VERSION    C                   '1.2.9'
     D ZLIB_VERNUM     C                   X'1290'
     D ZLIB_VERSION    C                   '1.2.11'
     D ZLIB_VERNUM     C                   X'12a0'
     D ZLIB_VER_MAJOR  C                   1
     D ZLIB_VER_MINOR  C                   2
     D ZLIB_VER_REVISION...
     D                 C                   9
     D                 C                   11
     D ZLIB_VER_SUBREVISION...
     D                 C                   0
      *
      *  Other equates.
      *
     D Z_NO_FLUSH      C                   0
     D Z_PARTIAL_FLUSH...

      <QPG:EmailAddress></QPG:EmailAddress>
   </QPG:Responsible>

   <QPG:Values>
      <QPG:Files>
         <QPG:Add file="../zconf.h" install="/opt/include/" user="root:sys" permission="644"/>
         <QPG:Add file="../zlib.h" install="/opt/include/" user="root:sys" permission="644"/>
         <QPG:Add file="../libz.so.1.2.9" install="/opt/lib/" user="root:bin" permission="644"/>
         <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.9"/>
         <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.9"/>
         <QPG:Add file="../libz.so.1.2.9" install="/opt/lib/" component="slib"/>
         <QPG:Add file="../libz.so.1.2.11" install="/opt/lib/" user="root:bin" permission="644"/>
         <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.11"/>
         <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.11"/>
         <QPG:Add file="../libz.so.1.2.11" install="/opt/lib/" component="slib"/>
      </QPG:Files>

      <QPG:PackageFilter>
         <QPM:PackageManifest>
            <QPM:PackageDescription>
               <QPM:PackageType>Library</QPM:PackageType>
               <QPM:PackageReleaseNotes></QPM:PackageReleaseNotes>

               <QPM:ProductDescriptionShort>A massively spiffy yet delicately unobtrusive compression library.</QPM:ProductDescriptionShort>
               <QPM:ProductDescriptionLong>zlib is designed to be a free, general-purpose, legally unencumbered, lossless data compression library for use on virtually any computer hardware and operating system.</QPM:ProductDescriptionLong>
               <QPM:ProductDescriptionURL>http://www.gzip.org/zlib</QPM:ProductDescriptionURL>
               <QPM:ProductDescriptionEmbedURL></QPM:ProductDescriptionEmbedURL>
            </QPM:ProductDescription>

            <QPM:ReleaseDescription>
               <QPM:ReleaseVersion>1.2.9</QPM:ReleaseVersion>
               <QPM:ReleaseVersion>1.2.11</QPM:ReleaseVersion>
               <QPM:ReleaseUrgency>Medium</QPM:ReleaseUrgency>
               <QPM:ReleaseStability>Stable</QPM:ReleaseStability>
               <QPM:ReleaseNoteMinor></QPM:ReleaseNoteMinor>
               <QPM:ReleaseNoteMajor></QPM:ReleaseNoteMajor>
               <QPM:ExcludeCountries>
                  <QPM:Country></QPM:Country>
               </QPM:ExcludeCountries>

<?xml version="1.0" ?>
<package name="zlib" version="1.2.9">
    <library name="zlib" dlversion="1.2.9" dlname="z">
<package name="zlib" version="1.2.11">
    <library name="zlib" dlversion="1.2.11" dlname="z">
	<property name="description"> zip compression library </property>
	<property name="include-target-dir" value="$(@PACKAGE/install-includedir)" />

	<!-- fixme: not implemented yet -->
	<property name="compiler/c/inline" value="yes" />

	<include-file name="zlib.h" scope="public" mode="644" />

/* trees.c -- output deflated data using Huffman coding
 * Copyright (C) 1995-2016 Jean-loup Gailly
 * Copyright (C) 1995-2017 Jean-loup Gailly
 * detect_data_type() function provided freely by Cosmin Truta, 2006
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

/*
 *  ALGORITHM
 *

    s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
#endif
    bi_flush(s);
}

/* ===========================================================================
 * Determine the best encoding for the current block: dynamic trees, static
 * trees or store, and output the encoded block to the zip file.
 * trees or store, and write out the encoded block.
 */
void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
    deflate_state *s;
    charf *buf;       /* input block, or NULL if too old */
    ulg stored_len;   /* length of input block */
    int last;         /* one if this is the last block for a file */
{

# Makefile for zlib using Microsoft (Visual) C
# zlib is copyright (C) 1995-2006 Jean-loup Gailly and Mark Adler
# zlib is copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
#
# Usage:
#   nmake -f win32/Makefile.msc                          (standard build)
#   nmake -f win32/Makefile.msc LOC=-DFOO                (nonstandard build)
#   nmake -f win32/Makefile.msc LOC="-DASMV -DASMINF" \
#         OBJA="inffas32.obj match686.obj"               (use ASM code, x86)
#   nmake -f win32/Makefile.msc AS=ml64 LOC="-DASMV -DASMINF -I." \

ZLIB DATA COMPRESSION LIBRARY

zlib 1.2.9 is a general purpose data compression library.  All the code is
zlib 1.2.11 is a general purpose data compression library.  All the code is
thread safe.  The data format used by the zlib library is described by RFCs
(Request for Comments) 1950 to 1952 in the files
http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
and rfc1952.txt (gzip format).

All functions of the compression library are documented in the file zlib.h
(volunteer to write man pages welcome, contact zlib@gzip.org).  Two compiled

PLEASE read DLL_FAQ.txt, and the the zlib FAQ http://zlib.net/zlib_faq.html
before asking for help.


Manifest:

The package zlib-1.2.9-win32-x86.zip will contain the following files:
The package zlib-1.2.11-win32-x86.zip will contain the following files:

  README-WIN32.txt This document
  ChangeLog        Changes since previous zlib packages
  DLL_FAQ.txt      Frequently asked questions about zlib1.dll
  zlib.3.pdf       Documentation of this library in Adobe Acrobat format

  example.exe      A statically-bound example (using zlib.lib, not the dll)

zlib specifications were written by L.  Peter Deutsch.  Thanks to all the
people who reported problems and suggested various improvements in zlib; they
are too numerous to cite here.


Copyright notice:

  (C) 1995-2012 Jean-loup Gailly and Mark Adler
  (C) 1995-2017 Jean-loup Gailly and Mark Adler

  This software is provided 'as-is', without any express or implied
  warranty.  In no event will the authors be held liable for any damages
  arising from the use of this software.

  Permission is granted to anyone to use this software for any purpose,
  including commercial applications, and to alter it and redistribute it

What's here
===========
  The official ZLIB1.DLL


Source
======
  zlib version 1.2.8
  zlib version 1.2.11
  available at http://www.gzip.org/zlib/


Specification and rationale
===========================
  See the accompanying DLL_FAQ.txt


Usage
=====
  See the accompanying USAGE.txt


Build info
==========
  Contributed by Jan Nijtmans.

  Compiler:
    i686-w64-mingw32-gcc (GCC) 4.5.3
    i686-w64-mingw32-gcc (GCC) 5.4.0
  Library:
    mingw64-i686-runtime/headers: 3.0b_svn5747-1
    mingw64-i686-runtime/headers: 5.0.0
  Build commands:
    i686-w64-mingw32-gcc -c -DASMV contrib/asm686/match.S
    i686-w64-mingw32-gcc -c -DASMINF -I. -O3 contrib/inflate86/inffas86.c
    make -f win32/Makefile.gcc PREFIX=i686-w64-mingw32- LOC="-mms-bitfields -DASMV -DASMINF" OBJA="inffas86.o match.o"
   Finally, from VS commandline (VS2005 or higher):
    lib -machine:X86 -name:zlib1.dll -def:zlib.def -out:zdll.lib

Copyright notice
================
  Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
  Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler

  This software is provided 'as-is', without any express or implied
  warranty.  In no event will the authors be held liable for any damages
  arising from the use of this software.

  Permission is granted to anyone to use this software for any purpose,
  including commercial applications, and to alter it and redistribute it

Installing ZLIB1.DLL
====================
  Copy ZLIB1.DLL to the SYSTEM or the SYSTEM32 directory.
  
  If you want to install the 32-bit dll on a 64-bit
  machine, use the SysWOW64 directory instead.


Using ZLIB1.DLL with Microsoft Visual C++
=========================================
   1. Install the supplied header files "zlib.h" and "zconf.h"
      into a directory found in the INCLUDE path list.

   2. Install the supplied library file "zdll.lib" into a
      directory found in the LIB path list.

   3. Add "zdll.lib" to your project.


Using ZLIB1.DLL with gcc/MinGW
==============================
   1. Install the supplied header files "zlib.h" and "zconf.h"
      into the INCLUDE directory.

   2. Copy the supplied library file "zdll.lib" to "libzdll.a":
   2. (32-bit): Copy the supplied library file "zdll.lib" to "libzdll.a":
        cp lib/zdll.lib lib/libzdll.a

      OR

   2'. (64-bit): Copy the supplied library file "libz.dll.a" to "libzdll.a":
        cp lib/libz.dll.a lib/libzdll.a

      OR

   2' Build the import library from the supplied "zlib.def":
   2'' Build the import library from the supplied "zlib.def":
        dlltool -D zlib1.dll -d lib/zlib.def -l lib/libzdll.a

   3. Install "libzdll.a" into the LIB directory.

   4. Add "libzdll.a" to your project, or use the -lzdll option.

To build zlib using the Microsoft Visual C++ environment,
use the appropriate project from the projects/ directory.
use the appropriate project from the contrib/vstudio/ directory.

  BEGIN
    BLOCK "040904E4"
    //language ID = U.S. English, char set = Windows, Multilingual
    BEGIN
      VALUE "FileDescription",	"zlib data compression library\0"
      VALUE "FileVersion",	ZLIB_VERSION "\0"
      VALUE "InternalName",	"zlib1.dll\0"
      VALUE "LegalCopyright",	"(C) 1995-2013 Jean-loup Gailly & Mark Adler\0"
      VALUE "LegalCopyright",	"(C) 1995-2017 Jean-loup Gailly & Mark Adler\0"
      VALUE "OriginalFilename",	"zlib1.dll\0"
      VALUE "ProductName",	"zlib\0"
      VALUE "ProductVersion",	ZLIB_VERSION "\0"
      VALUE "Comments",		"For more information visit http://www.zlib.net/\0"
    END
  END
  BLOCK "VarFileInfo"

.TH ZLIB 3 "31 Dec 2016"
.TH ZLIB 3 "15 Jan 2017"
.SH NAME
zlib \- compression/decompression library
.SH SYNOPSIS
[see
.I zlib.h
for full description]
.SH DESCRIPTION

.IP
http://zlib.net/zlib_faq.html
.LP
before asking for help.
Send questions and/or comments to zlib@gzip.org,
or (for the Windows DLL version) to Gilles Vollant (info@winimage.com).
.SH AUTHORS AND LICENSE
Version 1.2.9
Version 1.2.11
.LP
Copyright (C) 1995-2016 Jean-loup Gailly and Mark Adler
Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
.LP
This software is provided 'as-is', without any express or implied
warranty.  In no event will the authors be held liable for any damages
arising from the use of this software.
.LP
Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it

/* zlib.h -- interface of the 'zlib' general purpose compression library
  version 1.2.9, December 31st, 2016
  version 1.2.11, January 15th, 2017

  Copyright (C) 1995-2016 Jean-loup Gailly and Mark Adler
  Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler

  This software is provided 'as-is', without any express or implied
  warranty.  In no event will the authors be held liable for any damages
  arising from the use of this software.

  Permission is granted to anyone to use this software for any purpose,
  including commercial applications, and to alter it and redistribute it

#include "zconf.h"

#ifdef __cplusplus
extern "C" {
#endif

#define ZLIB_VERSION "1.2.9"
#define ZLIB_VERNUM 0x1290
#define ZLIB_VERSION "1.2.11"
#define ZLIB_VERNUM 0x12b0
#define ZLIB_VER_MAJOR 1
#define ZLIB_VER_MINOR 2
#define ZLIB_VER_REVISION 9
#define ZLIB_VER_REVISION 11
#define ZLIB_VER_SUBREVISION 0

/*
    The 'zlib' compression library provides in-memory compression and
  decompression functions, including integrity checks of the uncompressed data.
  This version of the library supports only one compression method (deflation)
  but other algorithms will be added later and will have the same stream

/*
ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));

     Initializes the internal stream state for decompression.  The fields
   next_in, avail_in, zalloc, zfree and opaque must be initialized before by
   the caller.  In the current version of inflate, the provide input is not
   read or consumed.  Any memory allocation will be deferred to the first call
   of inflate.  If zalloc and zfree are set to Z_NULL, inflateInit updates them
   to use default allocation functions.
   the caller.  In the current version of inflate, the provided input is not
   read or consumed.  The allocation of a sliding window will be deferred to
   the first call of inflate (if the decompression does not complete on the
   first call).  If zalloc and zfree are set to Z_NULL, inflateInit updates
   them to use default allocation functions.

     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
   version assumed by the caller, or Z_STREAM_ERROR if the parameters are
   invalid, such as a null pointer to the structure.  msg is set to null if
   there is no error message.  inflateInit does not perform any decompression.
   Actual decompression will be done by inflate().  So next_in, and avail_in,

  forced to flush.

  The detailed semantics are as follows.  inflate performs one or both of the
  following actions:

  - Decompress more input starting at next_in and update next_in and avail_in
    accordingly.  If not all input can be processed (because there is not
    enough room in the output buffer), then next_in and avail_on are updated
    enough room in the output buffer), then next_in and avail_in are updated
    accordingly, and processing will resume at this point for the next call of
    inflate().

  - Generate more output starting at next_out and update next_out and avail_out
    accordingly.  inflate() provides as much output as possible, until there is
    no more input data or no more space in the output buffer (see below about
    the flush parameter).

                                      int strategy));
/*
     Dynamically update the compression level and compression strategy.  The
   interpretation of level and strategy is as in deflateInit2().  This can be
   used to switch between compression and straight copy of the input data, or
   to switch to a different kind of input data requiring a different strategy.
   If the compression approach (which is a function of the level) or the
   strategy is changed, and if any input has been consumed in a previous
   strategy is changed, then the input available so far is compressed with the
   old level and strategy using deflate(strm, Z_BLOCK).  There are three
   approaches for the compression levels 0, 1..3, and 4..9 respectively.  The
   new level and strategy will take effect at the next call of deflate().
   deflate() call, then the input available so far is compressed with the old
   level and strategy using deflate(strm, Z_BLOCK).  There are three approaches
   for the compression levels 0, 1..3, and 4..9 respectively.  The new level
   and strategy will take effect at the next call of deflate().

     If a deflate(strm, Z_BLOCK) is performed by deflateParams(), and it does
   not have enough output space to complete, then the parameter change will not
   take effect.  In this case, deflateParams() can be called again with the
   same parameters and more output space to try again.

     In order to assure a change in the parameters on the first try, the

ZEXTERN int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
                                 const Bytef *source, uLong sourceLen));
/*
     Compresses the source buffer into the destination buffer.  sourceLen is
   the byte length of the source buffer.  Upon entry, destLen is the total size
   of the destination buffer, which must be at least the value returned by
   compressBound(sourceLen).  Upon exit, destLen is the actual size of the
   compressed buffer.  compress() is equivalent to compress2() with a level
   compressed data.  compress() is equivalent to compress2() with a level
   parameter of Z_DEFAULT_COMPRESSION.

     compress returns Z_OK if success, Z_MEM_ERROR if there was not
   enough memory, Z_BUF_ERROR if there was not enough room in the output
   buffer.
*/

ZEXTERN int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
                                  const Bytef *source, uLong sourceLen,
                                  int level));
/*
     Compresses the source buffer into the destination buffer.  The level
   parameter has the same meaning as in deflateInit.  sourceLen is the byte
   length of the source buffer.  Upon entry, destLen is the total size of the
   destination buffer, which must be at least the value returned by
   compressBound(sourceLen).  Upon exit, destLen is the actual size of the
   compressed buffer.
   compressed data.

     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
   Z_STREAM_ERROR if the level parameter is invalid.
*/

ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));

/* zutil.c -- target dependent utility functions for the compression library
 * Copyright (C) 1995-2005, 2010, 2011, 2012, 2016 Jean-loup Gailly
 * Copyright (C) 1995-2017 Jean-loup Gailly
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

/* @(#) $Id$ */

#include "zutil.h"
#ifndef Z_SOLO

#    endif
#  endif
#endif
    return flags;
}

#ifdef ZLIB_DEBUG

#include <stdlib.h>
#  ifndef verbose
#    define verbose 0
#  endif
int ZLIB_INTERNAL z_verbose = verbose;

void ZLIB_INTERNAL z_error (m)
    char *m;

\fBTcl_SetVar2Ex\fR).
.PP
A typical usage for \fBTcl_GetReturnOptions\fR is to
retrieve the stack trace when script evaluation returns
\fBTCL_ERROR\fR, like so:
.PP
.CS
int code = Tcl_EvalEx(interp, script, -1, 0);
int code = Tcl_Eval(interp, script);
if (code == TCL_ERROR) {
    Tcl_Obj *options = \fBTcl_GetReturnOptions\fR(interp, code);
    Tcl_Obj *key = Tcl_NewStringObj("-errorinfo", -1);
    Tcl_Obj *stackTrace;
    Tcl_IncrRefCount(key);
    Tcl_DictObjGet(NULL, options, key, &stackTrace);
    Tcl_DecrRefCount(key);

'\"
'\" Copyright (c) 1993 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_CallWhenDeleted 3 7.0 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_CallWhenDeleted, Tcl_DontCallWhenDeleted \- Arrange for callback when interpreter is deleted
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 1989-1993 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_CommandComplete 3 "" Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_CommandComplete \- Check for unmatched braces in a Tcl command
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 1989-1993 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_Concat 3 7.5 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_Concat \- concatenate a collection of strings
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 1990-1994 The Regents of the University of California.
'\" Copyright (c) 1994-1997 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_CreateFileHandler 3 8.0 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_CreateFileHandler, Tcl_DeleteFileHandler \- associate procedure callbacks with files or devices (Unix only)
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 1989-1993 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_CreateInterp 3 7.5 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_CreateInterp, Tcl_DeleteInterp, Tcl_InterpActive, Tcl_InterpDeleted \- create and delete Tcl command interpreters
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 1990 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_CreateTimerHandler 3 7.5 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_CreateTimerHandler, Tcl_DeleteTimerHandler \- call a procedure at a given time
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 1989-1993 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_DetachPids 3 "" Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_DetachPids, Tcl_ReapDetachedProcs, Tcl_WaitPid \- manage child processes in background
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 2003 Donal K. Fellows
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_DictObj 3 8.5 Tcl "Tcl Library Procedures"
.so man.macros
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
Tcl_NewDictObj, Tcl_DictObjPut, Tcl_DictObjGet, Tcl_DictObjRemove, Tcl_DictObjSize, Tcl_DictObjFirst, Tcl_DictObjNext, Tcl_DictObjDone, Tcl_DictObjPutKeyList, Tcl_DictObjRemoveKeyList \- manipulate Tcl values as dictionaries
.SH SYNOPSIS

'\"
'\" Copyright (c) 1990 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_DoWhenIdle 3 7.5 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_DoWhenIdle, Tcl_CancelIdleCall \- invoke a procedure when there are no pending events
.SH SYNOPSIS
.nf

\fBTcl_ExternalToUtf\fR.
.PP
\fBTcl_WinUtfToTChar\fR and \fBTcl_WinTCharToUtf\fR are
Windows-only convenience
functions for converting between UTF-8 and Windows strings
based on the TCHAR type which is by convention
a Unicode character on Windows NT.
These functions are essentially wrappers around
\fBTcl_UtfToExternalDString\fR and
\fBTcl_ExternalToUtfDString\fR that convert to and from the
Unicode encoding.
.PP
\fBTcl_GetEncodingName\fR is roughly the inverse of \fBTcl_GetEncoding\fR.
Given an \fIencoding\fR, the return value is the \fIname\fR argument that
was used to create the encoding.  The string returned by
\fBTcl_GetEncodingName\fR is only guaranteed to persist until the
\fIencoding\fR is deleted.  The caller must not modify this string.
.PP

'\"
'\" Copyright (c) 1997-1998 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_PutEnv 3 "7.5" Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_PutEnv \- procedures to manipulate the environment
.SH SYNOPSIS
.nf

\fBTCL_EVAL_DIRECT\fR flag is useful in situations where the
contents of a value are going to change immediately, so the
bytecodes will not be reused in a future execution.  In this case,
it is faster to execute the script directly.
.TP 23
\fBTCL_EVAL_GLOBAL\fR
.
If this flag is set, the script is processed at global level.  This
If this flag is set, the script is evaluated in the global namespace instead of
means that it is evaluated in the global namespace and its variable
context consists of global variables only (it ignores any Tcl
procedures that are active).
the current namespace and its variable context consists of global variables
only (it ignores any Tcl procedures that are active).
.\" TODO: document TCL_EVAL_INVOKE and TCL_EVAL_NOERR.

.SH "MISCELLANEOUS DETAILS"
.PP
During the processing of a Tcl command it is legal to make nested
calls to evaluate other commands (this is how procedures and
some control structures are implemented).
If a code other than \fBTCL_OK\fR is returned

about to be returned from the topmost \fBTcl_EvalObjEx\fR
invocation for \fIinterp\fR,
it converts the return code to \fBTCL_ERROR\fR
and sets \fIinterp\fR's result to an error message indicating that
the \fBreturn\fR, \fBbreak\fR, or \fBcontinue\fR command was
invoked in an inappropriate place.
This means that top-level applications should never see a return code
from \fBTcl_EvalObjEx\fR other then \fBTCL_OK\fR or \fBTCL_ERROR\fR.
from \fBTcl_EvalObjEx\fR other than \fBTCL_OK\fR or \fBTCL_ERROR\fR.

.SH KEYWORDS
execute, file, global, result, script, value

'\"
'\" Copyright (c) 1996-1997 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_ExprLongObj 3 8.0 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_ExprLongObj, Tcl_ExprDoubleObj, Tcl_ExprBooleanObj, Tcl_ExprObj \- evaluate an expression
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 1995-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_FindExecutable 3 8.1 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_FindExecutable, Tcl_GetNameOfExecutable \- identify or return the name of the binary file containing the application
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 1998-1999 Scriptics Corporation
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_GetCwd 3 8.1 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_GetCwd, Tcl_Chdir \- manipulate the current working directory
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 1997 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_GetIndexFromObj 3 8.1 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_GetIndexFromObj, Tcl_GetIndexFromObjStruct \- lookup string in table of keywords
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 1996-1997 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_GetOpenFile 3 8.0 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_GetOpenFile \- Return a FILE* for a channel registered in the given interpreter (Unix only)
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 2001 by Kevin B. Kenny <kennykb@acm.org>.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_GetTime 3 8.4 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_GetTime, Tcl_SetTimeProc, Tcl_QueryTimeProc \- get date and time
.SH SYNOPSIS
.nf

custom set of allocation routines might depend on, in order to avoid any
circular dependency.
.PP
The \fIhashKeyProc\fR member contains the address of a function called to
calculate a hash value for the key.
.PP
.CS
typedef TCL_HASH_TYPE \fBTcl_HashKeyProc\fR(
typedef unsigned int \fBTcl_HashKeyProc\fR(
        Tcl_HashTable *\fItablePtr\fR,
        void *\fIkeyPtr\fR);
.CE
.PP
If this is NULL then \fIkeyPtr\fR is used and
\fBTCL_HASH_KEY_RANDOMIZE_HASH\fR is assumed.
.PP

'\"
'\" Copyright (c) 1998-2000 by Scriptics Corporation.
'\" All rights reserved.
'\"
'\" 
.TH Tcl_Init 3 8.0 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_Init \- find and source initialization script
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 1998-1999 Scriptics Corporation
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_InitStubs 3 8.1 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_InitStubs \- initialize the Tcl stubs mechanism
.SH SYNOPSIS
.nf
\fB#include <tcl.h>\fR
.sp
const char *
\fBTcl_InitStubs\fR(\fIinterp, version, exact\fR)
.SH ARGUMENTS
.AS Tcl_Interp *interp
.AP Tcl_Interp *interp in
Tcl interpreter handle.
.AP "const char" *version in
A version string consisting of one or more decimal numbers
separated by dots.
.AP int exact in
1 means that only the particular version specified by
Non-zero means that only the particular version specified by
\fIversion\fR is acceptable.
0 means that versions newer than \fIversion\fR are also
Zero means that versions newer than \fIversion\fR are also
acceptable as long as they have the same major version number
as \fIversion\fR. Other bits have no effect.
as \fIversion\fR.
.BE
.SH INTRODUCTION
.PP
The Tcl stubs mechanism defines a way to dynamically bind
extensions to a particular Tcl implementation at run time.
This provides two significant benefits to Tcl users:
.IP 1) 5

with which values might be exchanged.  The C integral types for which Tcl
provides value exchange routines are \fBint\fR, \fBlong int\fR,
\fBTcl_WideInt\fR, and \fBmp_int\fR.  The \fBint\fR and \fBlong int\fR types
are provided by the C language standard.  The \fBTcl_WideInt\fR type is a
typedef defined to be whatever signed integral type covers at least the
64-bit integer range (-9223372036854775808 to 9223372036854775807).  Depending
on the platform and the C compiler, the actual type might be
\fBlong int\fR, \fBlong long int\fR, \fBint64\fR, or something else.
\fBlong int\fR, \fBlong long int\fR, \fB__int64\fR, or something else.
The \fBmp_int\fR type is a multiple-precision integer type defined
by the LibTomMath multiple-precision integer library.
.PP
The \fBTcl_NewIntObj\fR, \fBTcl_NewLongObj\fR, \fBTcl_NewWideIntObj\fR,
and \fBTcl_NewBignumObj\fR routines each create and return a new
Tcl value initialized to the integral value of the argument.  The
returned Tcl value is unshared.

'\"
'\" Copyright (c) 2004 Donal K. Fellows
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_LimitCheck 3 8.5 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_LimitAddHandler, Tcl_LimitCheck, Tcl_LimitExceeded, Tcl_LimitGetCommands, Tcl_LimitGetGranularity, Tcl_LimitGetTime, Tcl_LimitReady, Tcl_LimitRemoveHandler, Tcl_LimitSetCommands, Tcl_LimitSetGranularity, Tcl_LimitSetTime, Tcl_LimitTypeEnabled, Tcl_LimitTypeExceeded, Tcl_LimitTypeReset, Tcl_LimitTypeSet \- manage and check resource limits on interpreters
.SH SYNOPSIS
.nf

\fBTCL_LINK_READ_ONLY\fR:
.TP
\fBTCL_LINK_INT\fR
The C variable is of type \fBint\fR.
Any value written into the Tcl variable must have a proper integer
form acceptable to \fBTcl_GetIntFromObj\fR;  attempts to write
non-integer values into \fIvarName\fR will be rejected with
Tcl errors.
Tcl errors. Incomplete integer representations (like the empty
string, '+', '-' or the hex/octal/binary prefix) are accepted
as if they are valid too.
.TP
\fBTCL_LINK_UINT\fR
The C variable is of type \fBunsigned int\fR.
Any value written into the Tcl variable must have a proper unsigned
integer form acceptable to \fBTcl_GetWideIntFromObj\fR and in the
platform's defined range for the \fBunsigned int\fR type; attempts to
write non-integer values (or values outside the range) into
\fIvarName\fR will be rejected with Tcl errors.
\fIvarName\fR will be rejected with Tcl errors. Incomplete integer
representations (like the empty string, '+', '-' or the hex/octal/binary
prefix) are accepted as if they are valid too.
.TP
\fBTCL_LINK_CHAR\fR
The C variable is of type \fBchar\fR.
Any value written into the Tcl variable must have a proper integer
form acceptable to \fBTcl_GetIntFromObj\fR and be in the range of the
\fBchar\fR datatype; attempts to write non-integer or out-of-range
values into \fIvarName\fR will be rejected with Tcl errors.
values into \fIvarName\fR will be rejected with Tcl errors. Incomplete
integer representations (like the empty string, '+', '-' or the
hex/octal/binary prefix) are accepted as if they are valid too.
.TP
\fBTCL_LINK_UCHAR\fR
The C variable is of type \fBunsigned char\fR.
Any value written into the Tcl variable must have a proper unsigned
integer form acceptable to \fBTcl_GetIntFromObj\fR and in the
platform's defined range for the \fBunsigned char\fR type; attempts to
write non-integer values (or values outside the range) into
\fIvarName\fR will be rejected with Tcl errors.
\fIvarName\fR will be rejected with Tcl errors. Incomplete integer
representations (like the empty string, '+', '-' or the hex/octal/binary
prefix) are accepted as if they are valid too.
.TP
\fBTCL_LINK_SHORT\fR
The C variable is of type \fBshort\fR.
Any value written into the Tcl variable must have a proper integer
form acceptable to \fBTcl_GetIntFromObj\fR and be in the range of the
\fBshort\fR datatype; attempts to write non-integer or out-of-range
values into \fIvarName\fR will be rejected with Tcl errors.
values into \fIvarName\fR will be rejected with Tcl errors. Incomplete
integer representations (like the empty string, '+', '-' or the
hex/octal/binary prefix) are accepted as if they are valid too.
.TP
\fBTCL_LINK_USHORT\fR
The C variable is of type \fBunsigned short\fR.
Any value written into the Tcl variable must have a proper unsigned
integer form acceptable to \fBTcl_GetIntFromObj\fR and in the
platform's defined range for the \fBunsigned short\fR type; attempts to
write non-integer values (or values outside the range) into
\fIvarName\fR will be rejected with Tcl errors.
\fIvarName\fR will be rejected with Tcl errors. Incomplete integer
representations (like the empty string, '+', '-' or the hex/octal/binary
prefix) are accepted as if they are valid too.
.TP
\fBTCL_LINK_LONG\fR
The C variable is of type \fBlong\fR.
Any value written into the Tcl variable must have a proper integer
form acceptable to \fBTcl_GetLongFromObj\fR; attempts to write
non-integer or out-of-range
values into \fIvarName\fR will be rejected with Tcl errors.
values into \fIvarName\fR will be rejected with Tcl errors. Incomplete
integer representations (like the empty string, '+', '-' or the
hex/octal/binary prefix) are accepted as if they are valid too.
.TP
\fBTCL_LINK_ULONG\fR
The C variable is of type \fBunsigned long\fR.
Any value written into the Tcl variable must have a proper unsigned
integer form acceptable to \fBTcl_GetWideIntFromObj\fR and in the
platform's defined range for the \fBunsigned long\fR type; attempts to
write non-integer values (or values outside the range) into
\fIvarName\fR will be rejected with Tcl errors.
\fIvarName\fR will be rejected with Tcl errors. Incomplete integer
representations (like the empty string, '+', '-' or the hex/octal/binary
prefix) are accepted as if they are valid too.
.TP
\fBTCL_LINK_DOUBLE\fR
The C variable is of type \fBdouble\fR.
Any value written into the Tcl variable must have a proper real
form acceptable to \fBTcl_GetDoubleFromObj\fR;  attempts to write
non-real values into \fIvarName\fR will be rejected with
Tcl errors.
Tcl errors. Incomplete integer or real representations (like the
empty string, '.', '+', '-' or the hex/octal/binary prefix) are
accepted as if they are valid too.
.TP
\fBTCL_LINK_FLOAT\fR
The C variable is of type \fBfloat\fR.
Any value written into the Tcl variable must have a proper real
form acceptable to \fBTcl_GetDoubleFromObj\fR and must be within the
range acceptable for a \fBfloat\fR; attempts to
write non-real values (or values outside the range) into
\fIvarName\fR will be rejected with Tcl errors.
\fIvarName\fR will be rejected with Tcl errors. Incomplete integer
or real representations (like the empty string, '.', '+', '-' or
the hex/octal/binary prefix) are accepted as if they are valid too.
.TP
\fBTCL_LINK_WIDE_INT\fR
The C variable is of type \fBTcl_WideInt\fR (which is an integer type
at least 64-bits wide on all platforms that can support it.)
Any value written into the Tcl variable must have a proper integer
form acceptable to \fBTcl_GetWideIntFromObj\fR;  attempts to write
non-integer values into \fIvarName\fR will be rejected with
Tcl errors.
Tcl errors. Incomplete integer representations (like the empty
string, '+', '-' or the hex/octal/binary prefix) are accepted
as if they are valid too.
.TP
\fBTCL_LINK_WIDE_UINT\fR
The C variable is of type \fBTcl_WideUInt\fR (which is an unsigned
integer type at least 64-bits wide on all platforms that can support
it.)
Any value written into the Tcl variable must have a proper unsigned
integer form acceptable to \fBTcl_GetWideIntFromObj\fR (it will be
cast to unsigned);
.\" FIXME! Use bignums instead.
attempts to write non-integer values into \fIvarName\fR will be
rejected with Tcl errors.
rejected with Tcl errors. Incomplete integer representations (like
the empty string, '+', '-' or the hex/octal/binary prefix) are accepted
as if they are valid too.
.TP
\fBTCL_LINK_BOOLEAN\fR
The C variable is of type \fBint\fR.
If its value is zero then it will read from Tcl as
.QW 0 ;
otherwise it will read from Tcl as
.QW 1 .

'\"
'\" Copyright (c) 2009-2010 Kevin B. Kenny
'\" Copyright (c) 2010 Donal K. Fellows
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Load 3 8.6 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_LoadFile, Tcl_FindSymbol \- platform-independent dynamic library loading
.SH SYNOPSIS
.nf

.\"
.\" Copyright (c) 2008 by Kevin B. Kenny.
.\" Copyright (c) 2018 by Nathan Coulter. 
.\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
.TH NRE 3 8.6 Tcl "Tcl Library Procedures"
.so man.macros
.BS

.sp
void
\fBTcl_NRAddCallback\fR(\fIinterp, postProcPtr, data0, data1, data2, data3\fR)
.fi
.SH ARGUMENTS
.AS Tcl_CmdDeleteProc *interp in
.AP Tcl_Interp *interp in
Interpreter in which to create or evaluate a command.
The relevant Interpreter.
.AP char *cmdName in
Name of a new command to create.
Name of the command to create.
.AP Tcl_ObjCmdProc *proc in
Implementation of a command that will be called whenever \fIcmdName\fR
is invoked as a command in the unoptimized way.
Called in order to evaluate a command.  Is often just a small wrapper that uses
\fBTcl_NRCallObjProc\fR to call \fInreProc\fR using a new trampoline.  Behaves
in the same way as the \fIproc\fR argument to \fBTcl_CreateObjCommand\fR(3)
(\fIq.v.\fR).
.AP Tcl_ObjCmdProc *nreProc in
Implementation of a command that will be called whenever \fIcmdName\fR
is invoked and requested to conserve the C stack.
Called instead of \fIproc\fR when a trampoline is already in use.
.AP ClientData clientData in
Arbitrary one-word value that will be passed to \fIproc\fR, \fInreProc\fR,
\fIdeleteProc\fR and \fIobjProc\fR.
Arbitrary one-word value passed to \fIproc\fR, \fInreProc\fR, \fIdeleteProc\fR
and \fIobjProc\fR.
.AP Tcl_CmdDeleteProc *deleteProc in/out
Procedure to call before \fIcmdName\fR is deleted from the interpreter.
This procedure allows for command-specific cleanup. If \fIdeleteProc\fR
Called before \fIcmdName\fR is deleted from the interpreter, allowing for
command-specific cleanup. May be NULL.
is \fBNULL\fR, then no procedure is called before the command is deleted.
.AP int objc in
Count of parameters provided to the implementation of a command.
Number of items in \fIobjv\fR.
.AP Tcl_Obj **objv in
Pointer to an array of Tcl values. Each value holds the value of a
single word in the command to execute.
Words in the command.
.AP Tcl_Obj *objPtr in
Pointer to a Tcl_Obj whose value is a script or expression to execute.
A script or expression to evaluate.
.AP int flags in
As described for \fITcl_EvalObjv\fR.
ORed combination of flag bits that specify additional options.
.PP
\fBTCL_EVAL_GLOBAL\fR is the only flag that is currently supported.
.\" TODO: This is a lie. But kbk didn't grasp TCL_EVAL_INVOKE and
.\"       TCL_EVAL_NOERR well enough to document them.
.AP Tcl_Command cmd in
Token for a command that is to be used instead of the currently
executing command.
Token to use instead of one derived from the first word of \fIobjv\fR in order
to evaluate a command.
.AP Tcl_Obj *resultPtr out
Pointer to an unshared Tcl_Obj where the result of expression
evaluation is written.
Pointer to an unshared Tcl_Obj where the result of the evaluation is stored if
the return code is TCL_OK.
.AP Tcl_NRPostProc *postProcPtr in
Pointer to a function that will be invoked when the command currently
A function to push.
executing in the interpreter designated by \fIinterp\fR completes.
.AP ClientData data0 in
.AP ClientData data1 in
.AP ClientData data2 in
.AP ClientData data3 in
\fIdata0\fR through \fIdata3\fR are four one-word values that will be passed
to the function designated by \fIpostProcPtr\fR when it is invoked.
.BE
.SH DESCRIPTION
.PP
This series of C functions provides an interface whereby commands that
are implemented in C can be evaluated, and invoke Tcl commands scripts
and scripts, without consuming space on the C stack. The non-recursive
evaluation is done by installing a \fItrampoline\fR, a small piece of
These functions provide an interface to the function stack that an interpreter
iterates through to evaluate commands.  The routine behind a command is
implemented by an initial function and any additional functions that the
routine pushes onto the stack as it progresses.  The interpreter itself pushes
functions onto the stack to react to the end of a routine and to exercise other
forms of control such as switching between in-progress stacks and the
evaluation of other scripts at additional levels without adding frames to the C
stack.  To execute a routine, the initial function for the routine is called
and then a small bit of code called a \fItrampoline\fR iteratively takes
code that invokes a command or script, and then executes a series of
callbacks when the command or script returns.
functions off the stack and calls them, using the value of the last call as the
value of the routine.
.PP
The \fBTcl_NRCreateCommand\fR function creates a Tcl command in the
interpreter designated by \fIinterp\fR that is prepared to handle
nonrecursive evaluation with a trampoline. The \fIcmdName\fR argument
gives the name of the new command. If \fIcmdName\fR contains any
namespace qualifiers, then the new command is added to the specified
namespace; otherwise, it is added to the global namespace. \fIproc\fR
gives the procedure that will be called when the interpreter wishes to
evaluate the command in an unoptimized manner, and \fInreProc\fR is
\fBTcl_NRCallObjProc\fR calls \fInreProc\fR using a new trampoline.
the procedure that will be called when the interpreter wishes to
evaluate the command using a trampoline. \fIdeleteProc\fR is a
function that will be called before the command is deleted from the
interpreter. When any of the three functions is invoked, it is passed
the \fIclientData\fR parameter.
.PP
\fBTcl_NRCreateCommand\fR deletes any existing command
\fBTcl_NRCreateCommand\fR, an alternative to \fBTcl_CreateObjCommand\fR,
\fIname\fR already associated with the interpreter
(however see below for an exception where the existing command
is not deleted).
It returns a token that may be used to refer
to the command in subsequent calls to \fBTcl_GetCommandName\fR.
resolves \fIcmdName\fR, which may contain namespace qualifiers, relative to the
current namespace, creates a command by that name, and returns a token for the
command which may be used in subsequent calls to \fBTcl_GetCommandName\fR.
If \fBTcl_NRCreateCommand\fR is called for an interpreter that is in
the process of being deleted, then it does not create a new command,
does not delete any existing command of the same name, and returns NULL.
Except for a few cases noted below any existing command by the same name is
.PP
The \fIproc\fR and \fInreProc\fR function are expected to conform to
all the rules set forth for the \fIproc\fR argument to
\fBTcl_CreateObjCommand\fR(3) (\fIq.v.\fR).
.PP
When a command that is written to cope with evaluation via trampoline
is invoked without a trampoline on the stack, it will usually respond
to the invocation by creating a trampoline and calling the
trampoline-enabled implementation of the same command. This call is done by
means of \fBTcl_NRCallObjProc\fR. In the call to
\fBTcl_NRCallObjProc\fR, the \fIinterp\fR, \fIclientData\fR,
\fIobjc\fR and \fIobjv\fR parameters should be the same ones that were
passed to \fIproc\fR. The \fInreProc\fR parameter should designate the
trampoline-enabled implementation of the command.
.PP
\fBTcl_NREvalObj\fR arranges for the script contained in \fIobjPtr\fR
to be evaluated in the interpreter designated by \fIinterp\fR after
the current command (which must be trampoline-enabled) returns. It is
the method by which a command may invoke a script without consuming
space on the C stack. Similarly, \fBTcl_NREvalObjv\fR arranges to
first deleted.  If \fIinterp\fR is in the process of being deleted
\fBTcl_NRCreateCommand\fR does not create any command, does not delete any
command, and returns NULL.
.PP
\fBTcl_NREvalObj\fR pushes a function that is like \fBTcl_EvalObjEx\fR but
consumes no space on the C stack.
invoke a single Tcl command whose words have already been separated
and substituted. The \fIobjc\fR and \fIobjv\fR parameters give the
words of the command to be evaluated when execution reaches the
trampoline.
.PP
\fBTcl_NRCmdSwap\fR allows for trampoline evaluation of a command whose
resolution is already known.  The \fIcmd\fR parameter gives a
\fBTcl_Command\fR token (returned from \fBTcl_CreateObjCommand\fR or
\fBTcl_GetCommandFromObj\fR) identifying the command to be invoked in
the trampoline; this command must match the word in \fIobjv[0]\fR.
The remaining arguments are as for \fBTcl_NREvalObjv\fR.
\fBTcl_NREvalObjv\fR pushes a function that is like \fBTcl_EvalObjv\fR but
consumes no space on the C stack.
.PP
\fBTcl_NREvalObj\fR, \fBTcl_NREvalObjv\fR and \fBTcl_NRCmdSwap\fR
\fBTcl_NRCmdSwap\fR is like \fBTcl_NREvalObjv\fR, but uses \fIcmd\fR, a token
all accept a \fIflags\fR parameter, which is an OR-ed-together set of
bits to control evaluation. At the present time, the only supported flag
available to callers is \fBTCL_EVAL_GLOBAL\fR.
previously returned by \fBTcl_CreateObjCommand\fR or
.\" TODO: Again, this is a lie. Do we want to explain TCL_EVAL_INVOKE
.\"       and TCL_EVAL_NOERR?
If the \fBTCL_EVAL_GLOBAL\fR flag is set, the script or command is
\fBTcl_GetCommandFromObj\fR, instead of resolving the first word of \fIobjv\fR.
.  The name of this command must be the same as \fIobjv[0]\fR.
evaluated in the global namespace. If it is not set, it is evaluated
in the current namespace.
.PP
\fBTcl_NRExprObj\fR arranges for the expression contained in \fIobjPtr\fR
\fBTcl_NRExprObj\fR pushes a function that evaluates \fIobjPtr\fR as an
to be evaluated in the interpreter designated by \fIinterp\fR after
the current command (which must be trampoline-enabled) returns. It is
the method by which a command may evaluate a Tcl expression without consuming
space on the C stack.  The argument \fIresultPtr\fR is a pointer to an
expression in the same manner as \fBTcl_ExprObj\fR but without consuming space
on the C stack.
unshared Tcl_Obj where the result of expression evaluation is to be written.
If expression evaluation returns any code other than TCL_OK, the
\fIresultPtr\fR value is left untouched.
.PP
All of the routines return \fBTCL_OK\fR if command or expression invocation
has been scheduled successfully. If for any reason the scheduling cannot
All of the functions return \fBTCL_OK\fR if the evaluation of the script,
command, or expression has been scheduled successfully.  Otherwise (for example
be completed (for example, if the interpreter is unable to find
the requested command), they return \fBTCL_ERROR\fR with an
appropriate message left in the interpreter's result.
if the command name cannot be resolved), they return \fBTCL_ERROR\fR and store
a message as the interpreter's result.
.PP
\fBTcl_NRAddCallback\fR arranges to have a C function called when the
\fBTcl_NRAddCallback\fR pushes \fIpostProcPtr\fR.  The signature for
current trampoline-enabled command in the Tcl interpreter designated
by \fIinterp\fR returns.  The \fIpostProcPtr\fR argument is a pointer
to the callback function, which must have arguments and return value
consistent with the \fBTcl_NRPostProc\fR data type:
\fBTcl_NRPostProc\fR is:
.PP
.CS
typedef int
\fBTcl_NRPostProc\fR(
        \fBClientData\fR \fIdata\fR[],
        \fBTcl_Interp\fR *\fIinterp\fR,
        int \fIresult\fR);
.CE
.PP
When the trampoline invokes the callback function, the \fIdata\fR
parameter will point to an array containing the four one-word
quantities that were passed to \fBTcl_NRAddCallback\fR in the
\fIdata0\fR through \fIdata3\fR parameters. The Tcl interpreter will
\fIdata\fR is a pointer to an array containing \fIdata0\fR through \fIdata3\fR.
be designated by the \fIinterp\fR parameter, and the \fIresult\fR
parameter will contain the result (\fBTCL_OK\fR, \fBTCL_ERROR\fR,
\fBTCL_RETURN\fR, \fBTCL_BREAK\fR or \fBTCL_CONTINUE\fR) that was
returned by the command evaluation. The callback function is expected,
\fIresult\fR is the value returned by the previous function implementing part
in turn, either to return a \fIresult\fR to control further evaluation.
.PP
Multiple \fBTcl_NRAddCallback\fR invocations may request multiple
callbacks, which may be to the same or different callback
the routine.
functions. If multiple callbacks are requested, they are executed in
last-in, first-out order, that is, the most recently requested
callback is executed first.
.SH EXAMPLE
.PP
The usual pattern for Tcl commands that invoke other Tcl commands
The following command uses \fBTcl_EvalObjEx\fR, which consumes space on the C
is something like:
stack, to evalute a script:
.PP
.CS
int
\fITheCmdOldObjProc\fR(
    ClientData clientData,
    Tcl_Interp *interp,
    int objc,

    return result;
}
\fBTcl_CreateObjCommand\fR(interp, "theCommand",
        \fITheCmdOldObjProc\fR, clientData, TheCmdDeleteProc);
.CE
.PP
To enable a command like this one for trampoline-based evaluation,
it must be split into three pieces:
To avoid consuming space on the C stack, \fITheCmdOldObjProc\fR is renamed to
\fITheCmdNRObjProc\fR and the postprocessing step is split into a separate
.IP \(bu
A non-trampoline implementation, \fITheCmdNewObjProc\fR,
which will simply create a trampoline
and invoke the trampoline-based implementation.
function, \fITheCmdPostProc\fR, which is pushed onto the function stack.
\fITcl_EvalObjEx\fR is replaced with \fITcl_NREvalObj\fR, which uses a
trampoline instead of consuming space on the C stack.  A new version of
.IP \(bu
A trampoline-enabled implementation, \fITheCmdNRObjProc\fR.  This
\fITheCmdOldObjProc\fR is just a a wrapper that uses \fBTcl_NRCallObjProc\fR to
call \fITheCmdNRObjProc\fR:
function will perform the initialization, request that the trampoline
call the postprocessing routine after command evaluation, and finally,
request that the trampoline call the inner command.
.IP \(bu
A postprocessing routine, \fITheCmdPostProc\fR. This function will
perform the postprocessing formerly done after the return from the
inner command in \fITheCmdObjProc\fR.
.PP
The non-trampoline implementation is simple and stylized, containing
a single statement:
.PP
.CS
int
\fITheCmdNewObjProc\fR(
\fITheCmdOldObjProc\fR(
    ClientData clientData,
    Tcl_Interp *interp,
    int objc,
    Tcl_Obj *const objv[])
{
    return \fBTcl_NRCallObjProc\fR(interp, \fITheCmdNRObjProc\fR,
            clientData, objc, objv);
}
.CE
.PP
The trampoline-enabled implementation requests postprocessing,
and returns to the trampoline requesting command evaluation.
.PP
.CS
int
\fITheCmdNRObjProc\fR
    ClientData clientData,
    Tcl_Interp *interp,
    int objc,
    Tcl_Obj *const objv[])

    /* \fIdata0 .. data3\fR are up to four one-word items to
     * pass to the postprocessing procedure */

    return \fBTcl_NREvalObj\fR(interp, objPtr, 0);
}
.CE
.PP
The postprocessing procedure does whatever the original command did
upon return from the inner evaluation.
.PP
.CS
int
\fITheCmdNRPostProc\fR(
    ClientData data[],
    Tcl_Interp *interp,
    int result)
{
    /* \fIdata[0] .. data[3]\fR are the four words of data
     * passed to \fBTcl_NRAddCallback\fR */

    \fI... postprocessing ...\fR

    return result;
}
.CE
.PP
If \fItheCommand\fR is a command that results in multiple commands or
Any function comprising a routine can push other functions, making it possible
scripts being evaluated, its postprocessing routine may schedule
additional postprocessing and then request another command evaluation
by means of \fBTcl_NREvalObj\fR or one of the other evaluation
routines. Looping and sequencing constructs may be implemented in this way.
implement looping and sequencing constructs using the function stack.
.PP
Finally, to install a trampoline-enabled command in the interpreter,
\fBTcl_NRCreateCommand\fR is used in place of
\fBTcl_CreateObjCommand\fR.  It accepts two command procedures instead
of one. The first is for use when no trampoline is yet on the stack,
and the second is for use when there is already a trampoline in place.
.PP
.CS
\fBTcl_NRCreateCommand\fR(interp, "theCommand",
        \fITheCmdNewObjProc\fR, \fITheCmdNRObjProc\fR, clientData,
        TheCmdDeleteProc);
.CE
.SH "SEE ALSO"
Tcl_CreateCommand(3), Tcl_CreateObjCommand(3), Tcl_EvalObjEx(3), Tcl_GetCommandFromObj(3), Tcl_ExprObj(3)
.SH KEYWORDS
stackless, nonrecursive, execute, command, global, value, result, script
.SH COPYRIGHT
Copyright (c) 2008 by Kevin B. Kenny
Copyright (c) 2008 by Kevin B. Kenny.
Copyright (c) 2018 by Nathan Coulter.

'\"
'\" Copyright (c) 2003 Donal K. Fellows
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
'\" Note that some of these functions do not seem to belong, but they
'\" were all introduced with the same TIP (#139)
'\"
'\" 
.TH Tcl_Namespace 3 8.5 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_AppendExportList, Tcl_CreateNamespace, Tcl_DeleteNamespace, Tcl_Export, Tcl_FindCommand, Tcl_FindNamespace, Tcl_ForgetImport, Tcl_GetCurrentNamespace, Tcl_GetGlobalNamespace, Tcl_GetNamespaceUnknownHandler, Tcl_Import, Tcl_SetNamespaceUnknownHandler \- manipulate namespaces
.SH SYNOPSIS
.nf

\fBincr x\fR
.CE
.PP
The \fBincr\fR command first gets an integer from \fIx\fR's value
by calling \fBTcl_GetIntFromObj\fR.
This procedure checks whether the value is already an integer value.
Since it is not, it converts the value
by setting the value's \fIinternalRep.longValue\fR member
by setting the value's internal representation
to the integer \fB123\fR
and setting the value's \fItypePtr\fR
to point to the integer Tcl_ObjType structure.
Both representations are now valid.
\fBincr\fR increments the value's integer internal representation
then invalidates its string representation
(by calling \fBTcl_InvalidateStringRep\fR)

.PP
The \fIclientData\fR argument will be the same as the \fIclientData\fR
argument to \fBTcl_OpenTcpServer\fR, \fIchannel\fR will be the handle
for the new channel, \fIhostName\fR points to a string containing
the name of the client host making the connection, and \fIport\fR
will contain the client's port number.
The new channel
is opened for both input and output.
is opened for both input and output. 
If \fIproc\fR raises an error, the connection is closed automatically.
\fIProc\fR has no return value, but if it wishes to reject the
connection it can close \fIchannel\fR.
.PP
\fBTcl_OpenTcpServer\fR normally returns a pointer to a channel
representing the server socket.
If an error occurs, \fBTcl_OpenTcpServer\fR returns NULL and

'\"
'\" Copyright (c) 2008 Donal K. Fellows
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_ParseArgsObjv 3 8.6 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_ParseArgsObjv \- parse arguments according to a tabular description
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 1990 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_Preserve 3 7.5 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_Preserve, Tcl_Release, Tcl_EventuallyFree \- avoid freeing storage while it is being used
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 1989-1993 The Regents of the University of California.
'\" Copyright (c) 1994-1997 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_PrintDouble 3 8.0 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_PrintDouble \- Convert floating value to string
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 1997 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_RecordAndEvalObj 3 8.0 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_RecordAndEvalObj \- save command on history list before evaluating
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 1989-1993 The Regents of the University of California.
'\" Copyright (c) 1994-1997 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_RecordAndEval 3 7.4 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_RecordAndEval \- save command on history list before evaluating
.SH SYNOPSIS
.nf

value may then be passed back to one of \fBTcl_RestoreInterpState\fR
or \fBTcl_DiscardInterpState\fR, depending on whether the interp
state is to be restored.  So long as one of the latter two routines
is called, Tcl will take care of memory management.
.PP
The second triplet stores the snapshot of only the interpreter
result (not its complete state) in memory allocated by the caller.
These routines are passed a pointer to a \fBTcl_SavedResult\fR structure
These routines are passed a pointer to \fBTcl_SavedResult\fR
that is used to store enough information to restore the interpreter result.
This structure can be allocated on the stack of the calling
\fBTcl_SavedResult\fR can be allocated on the stack of the calling
procedure.  These routines do not save the state of any error
information in the interpreter (e.g. the \fB\-errorcode\fR or
\fB\-errorinfo\fR return options, when an error is in progress).
.PP
Because the routines \fBTcl_SaveInterpState\fR,
\fBTcl_RestoreInterpState\fR, and \fBTcl_DiscardInterpState\fR perform
a superset of the functions provided by the other routines,

'\"
'\" Copyright (c) 1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_SetErrno 3 8.3 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_SetErrno, Tcl_GetErrno, Tcl_ErrnoId, Tcl_ErrnoMsg \- manipulate errno to store and retrieve error codes
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 1989-1993 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_SetRecursionLimit 3 7.0 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_SetRecursionLimit \- set maximum allowable nesting depth in interpreter
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 2001 ActiveState Tool Corp.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_SignalId 3 8.3 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_SignalId, Tcl_SignalMsg \- Convert signal codes
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 1990 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_Sleep 3 7.5 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_Sleep \- delay execution for a given number of milliseconds
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 1989-1993 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_SplitList 3 8.0 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_SplitList, Tcl_Merge, Tcl_ScanElement, Tcl_ConvertElement, Tcl_ScanCountedElement, Tcl_ConvertCountedElement \- manipulate Tcl lists
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_SplitPath 3 7.5 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_SplitPath, Tcl_JoinPath, Tcl_GetPathType \- manipulate platform-dependent file paths
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 1995-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_StaticPackage 3 7.5 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_StaticPackage \- make a statically linked package available via the 'load' command
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 2001 by ActiveState Corporation
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH "Standard Channels" 3 7.5 Tcl "Tcl Library Procedures"
.so man.macros
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
Tcl_StandardChannels \- How the Tcl library deals with the standard channels
.BE

'\"
'\" Copyright (c) 1989-1993 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_StringMatch 3 8.5 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_StringMatch, Tcl_StringCaseMatch \- test whether a string matches a pattern
.SH SYNOPSIS
.nf

'\"
'\" Copyright (c) 2001 Donal K. Fellows
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH Tcl_SubstObj 3 8.4 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_SubstObj \- perform substitutions on Tcl values
.SH SYNOPSIS
.nf

'\"
'\" 
'\" Copyright (c) 1992-1999 Karl Lehenbauer and Mark Diekhans.
'\" Copyright (c) 2000 by Scriptics Corporation.
'\" All rights reserved.
'\"
'\" 
.TH TCL_MEM_DEBUG 3 8.1 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
TCL_MEM_DEBUG \- Compile-time flag to enable Tcl memory debugging
.BE
.SH DESCRIPTION

'\"
'\" Copyright (c) 2008 Donal K. Fellows
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH TclZlib 3 8.6 Tcl "Tcl Library Procedures"
.so man.macros
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
Tcl_ZlibAdler32, Tcl_ZlibCRC32, Tcl_ZlibDeflate, Tcl_ZlibInflate, Tcl_ZlibStreamChecksum, Tcl_ZlibStreamClose, Tcl_ZlibStreamEof, Tcl_ZlibStreamGet, Tcl_ZlibStreamGetCommandName, Tcl_ZlibStreamInit, Tcl_ZlibStreamPut \- compression and decompression functions
.SH SYNOPSIS

\fBTcl_UtfToLower\fR(\fIstr\fR)
.sp
int
\fBTcl_UtfToTitle\fR(\fIstr\fR)
.SH ARGUMENTS
.AS char *str in/out
.AP int ch in
The Tcl_UniChar to be converted.
The Unicode character to be converted.
.AP char *str in/out
Pointer to UTF-8 string to be converted in place.
.BE

.SH DESCRIPTION
.PP
The first three routines convert the case of individual Unicode characters:

.AS int ch
.AP int ch in
The Tcl_UniChar to be examined.
.BE

.SH DESCRIPTION
.PP
All of the routines described examine Tcl_UniChars and return a
All of the routines described examine Unicode characters and return a
boolean value. A non-zero return value means that the character does
belong to the character class associated with the called routine. The
rest of this document just describes the character classes associated
with the various routines.
.PP
Note: A Tcl_UniChar is a Unicode character represented as an unsigned,
fixed-size quantity.

.SH "CHARACTER CLASSES"
.PP
\fBTcl_UniCharIsAlnum\fR tests if the character is an alphanumeric Unicode character.
.PP
\fBTcl_UniCharIsAlpha\fR tests if the character is an alphabetic Unicode character.
.PP

\fBTcl_UtfBackslash\fR(\fIsrc, readPtr, dst\fR)
.SH ARGUMENTS
.AS "const Tcl_UniChar" *uniPattern in/out
.AP char *buf out
Buffer in which the UTF-8 representation of the Tcl_UniChar is stored.  At most
\fBTCL_UTF_MAX\fR bytes are stored in the buffer.
.AP int ch in
The Tcl_UniChar to be converted or examined.
The Unicode character to be converted or examined.
.AP Tcl_UniChar *chPtr out
Filled with the Tcl_UniChar represented by the head of the UTF-8 string.
.AP "const char" *src in
Pointer to a UTF-8 string.
.AP "const char" *cs in
Pointer to a UTF-8 string.
.AP "const char" *ct in

'\"
'\" Copyright (c) 1993-1994 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH break n "" Tcl "Tcl Built-In Commands"
.so man.macros
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
break \- Abort looping command
.SH SYNOPSIS

'\"
'\" Copyright (c) 1993 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH case n 7.0 Tcl "Tcl Built-In Commands"
.so man.macros
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
case \- Evaluate one of several scripts, depending on a given value
.SH SYNOPSIS

'\"
'\" Copyright (c) 1993 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH cd n "" Tcl "Tcl Built-In Commands"
.so man.macros
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
cd \- Change working directory
.SH SYNOPSIS

exactly 86400 seconds.  Tcl responds to leap seconds by speeding or
slowing its clock by a tiny fraction for some minutes until it is
back in sync with UTC; its data model does not represent minutes that
have 59 or 61 seconds.
.TP
\fIunit\fR
One of the words, \fBseconds\fR, \fBminutes\fR, \fBhours\fR,
\fBdays\fR, \fBweekdays\fR, \fBweeks\fR, \fBmonths\fR, or \fByears\fR.
Used in conjunction with \fIcount\fR to identify an interval of time,
for example, \fI3 seconds\fR or \fI1 year\fR.
\fBdays\fR, \fBweeks\fR, \fBmonths\fR, or \fByears\fR, or
any unique prefix of such a word. Used in conjunction with \fIcount\fR
to identify an interval of time, for example, \fI3 seconds\fR or
\fI1 year\fR.
.SS "OPTIONS"
.TP
\fB\-base\fR time
Specifies that any relative times present in a \fBclock scan\fR command
are to be given relative to \fItime\fR.  \fItime\fR must be expressed as
a count of nominal seconds from the epoch time of 1 January 1970, 00:00 UTC.
.TP

.PP
The \fBclock add\fR command performs clock arithmetic on a value
(expressed as nominal seconds from the epoch time of 1 January 1970, 00:00 UTC)
given as its first argument.  The remaining arguments (other than the
possible \fB\-timezone\fR, \fB\-locale\fR and \fB\-gmt\fR options)
are integers and keywords in alternation, where the keywords are chosen
from \fBseconds\fR, \fBminutes\fR, \fBhours\fR,
\fBdays\fR, \fBweekdays\fR, \fBweeks\fR, \fBmonths\fR, or \fByears\fR.
\fBdays\fR, \fBweeks\fR, \fBmonths\fR, or \fByears\fR, or
any unique prefix of such a word.
.PP
Addition of seconds, minutes and hours is fairly straightforward;
the given time increment (times sixty for minutes, or 3600 for hours)
is simply added to the \fItimeVal\fR given
to the \fBclock add\fR command.  The result is interpreted as
a nominal number of seconds from the Epoch.
.PP

.CE
.PP
Adding and subtracting days and weeks is accomplished by converting
the given time to a calendar day and time of day in the appropriate
time zone and locale.  The requisite number of days (weeks are converted
to days by multiplying by seven) is added to the calendar day, and
the date and time are then converted back to a count of seconds from
the epoch time.  The \fBweekdays\fR keyword is similar to \fBdays\fR,
the epoch time.
with the only difference that weekends - Saturdays and Sundays - are skipped.
.PP
Adding and subtracting a given number of days across the point that
the time changes at the start or end of summer time (Daylight Saving Time)
results in the \fIsame local time\fR on the day in question.  For
instance, the following code sets the value of \fBx\fR to \fB05:00:00\fR.
.PP
.CS

'\"
'\" Copyright (c) 1993 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH close n 7.5 Tcl "Tcl Built-In Commands"
.so man.macros
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
close \- Close an open channel
.SH SYNOPSIS

'\"
'\" Copyright (c) 1993 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH concat n 8.3 Tcl "Tcl Built-In Commands"
.so man.macros
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
concat \- Join lists together
.SH SYNOPSIS

'\"
'\" Copyright (c) 1993-1994 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH continue n "" Tcl "Tcl Built-In Commands"
.so man.macros
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
continue \- Skip to the next iteration of a loop
.SH SYNOPSIS

'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
oo::copy \- create copies of objects and classes
.SH SYNOPSIS
.nf
package require TclOO

\fBoo::copy\fI sourceObject \fR?\fItargetObject\fR?
\fBoo::copy\fI sourceObject \fR?\fItargetObject\fR? ?\fItargetNamespace\fR?
.fi
.BE
.SH DESCRIPTION
.PP
The \fBoo::copy\fR command creates a copy of an object or class. It takes the
name of the object or class to be copied, \fIsourceObject\fR, and optionally
the name of the object or class to create, \fItargetObject\fR, which will be
resolved relative to the current namespace if not an absolute qualified name.
If \fItargetObject\fR is omitted, a new name is chosen. The copied object will
be of the same class as the source object, and will have all its per-object
methods copied. If it is a class, it will also have all the class methods in
the class copied, but it will not have any of its instances copied.
resolved relative to the current namespace if not an absolute qualified name
and
.VS TIP473
\fItargetNamespace\fR which is the name of the namespace that will hold the
internal state of the object (\fBmy\fR command, etc.); it \fImust not\fR
refer to an existing namespace.
If either \fItargetObject\fR or \fItargetNamespace\fR is omitted or is given
as the empty string, a new name is chosen. Names, unless specified, are
chosen with the same algorithm used by the \fBnew\fR method of
\fBoo::class\fR.
.VE TIP473
The copied object will be of the same class as the source object, and will have 
all its per-object methods copied. If it is a class, it will also have all the 
class methods in the class copied, but it will not have any of its instances 
copied.
.PP
.VS
After the \fItargetObject\fR has been created and all definitions of its
configuration (e.g., methods, filters, mixins) copied, the \fB<cloned>\fR
method of \fItargetObject\fR will be invoked, to allow for customization of
the created object such as installing related variable traces. The only
argument given will be \fIsourceObject\fR. The default implementation of this

'\"
'\" Copyright (c) 2009 Donal K. Fellows.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH coroutine n 8.6 Tcl "Tcl Built-In Commands"
.so man.macros
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
coroutine, yield, yieldto \- Create and produce values from coroutines
.SH SYNOPSIS

command) will be \fIargList\fR, and the body of the constructor will be
\fIbodyScript\fR. When the body of the constructor is evaluated, the current
namespace of the constructor will be a namespace that is unique to the object
being constructed. Within the constructor, the \fBnext\fR command should be
used to call the superclasses' constructors. If \fIbodyScript\fR is the empty
string, the constructor will be deleted.
.TP
\fBdeletemethod\fI name\fR ?\fIname ...\fR
\fBdeletemethod\fI name\fR ?\fIname ...\fR?
.
This deletes each of the methods called \fIname\fR from a class. The methods
must have previously existed in that class. Does not affect the superclasses
of the class, nor does it affect the subclasses or instances of the class
(except when they have a call chain through the class being modified).
.TP
\fBdestructor\fI bodyScript\fR

.CS
set foo {foo {a b} bar 2 baz 3}
\fBdict with\fR foo {}
puts $foo
#    prints: \fIa b foo {a b} bar 2 baz 3\fR
.CE
.SH "SEE ALSO"
append(n), array(n), foreach(n), mapeach(n), incr(n), list(n), lappend(n), set(n)
append(n), array(n), foreach(n), incr(n), list(n), lappend(n), lmap(n), set(n)
.SH KEYWORDS
dictionary, create, update, lookup, iterate, filter, map
'\" Local Variables:
'\" mode: nroff
'\" End:

'\"
'\" Copyright (c) 1993 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH eof n 7.5 Tcl "Tcl Built-In Commands"
.so man.macros
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
eof \- Check for end of file condition on channel
.SH SYNOPSIS

'\"
'\" Copyright (c) 1993 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH eval n "" Tcl "Tcl Built-In Commands"
.so man.macros
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
eval \- Evaluate a Tcl script
.SH SYNOPSIS

'\"
'\" Copyright (c) 1993 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" 
.TH exit n "" Tcl "Tcl Built-In Commands"
.so man.macros
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
exit \- End the application
.SH SYNOPSIS

.SH NAME
expr \- Evaluate an expression
.SH SYNOPSIS
\fBexpr \fIarg \fR?\fIarg arg ...\fR?
.BE
.SH DESCRIPTION
.PP
Concatenates \fIarg\fRs, separated by a space, into an expression, and evaluates
that expression, returning its value.
The operators permitted in an expression include a subset of
Concatenates \fIarg\fRs (adding separator spaces between them),
evaluates the result as a Tcl expression, and returns the value.
The operators permitted in Tcl expressions include a subset of
the operators permitted in C expressions.  For those operators
common to both Tcl and C, Tcl applies the same meaning and precedence
as the corresponding C operators.
The value of an expression is often a numeric result, either an integer or a
floating-point value, but may also be a non-numeric value.
Expressions almost always yield numeric results
(integer or floating-point values).
For example, the expression
.PP
.CS
\fBexpr\fR 8.2 + 6
.CE
.PP
evaluates to 14.2.
Expressions differ from C expressions in the way that
operands are specified.  Expressions also support
non-numeric operands, string comparisons, and some
Tcl expressions differ from C expressions in the way that
operands are specified.  Also, Tcl expressions support
non-numeric operands and string comparisons, as well as some
additional operators not found in C.
.PP
When an expression evaluates to an integer, the value is the decimal form of
the integer, and when an expression evaluates to a floating-point number, the
value is the form produced by the \fB%g\fR format specifier of Tcl's
\fBformat\fR command.
.SS OPERANDS
.PP
An expression consists of a combination of operands, operators, parentheses and
commas, possibly with whitespace between any of these elements, which is
ignored.
An integer operand may be specified in decimal, binary
(the first two characters are \fB0b\fR), octal
(the first two characters are \fB0o\fR), or hexadecimal
(the first two characters are \fB0x\fR) form.  For
compatibility with older Tcl releases, an operand that begins with \fB0\fR is
interpreted as an octal integer even if the second character is not \fBo\fR.
A floating-point number may be specified in any of several
common decimal formats, and may use the decimal point \fB.\fR,
\fBe\fR or \fBE\fR for scientific notation, and
the sign characters \fB+\fR and \fB\-\fR.  The
following are all valid floating-point numbers:  2.1, 3., 6e4, 7.91e+16.
The strings \fBInf\fR
and \fBNaN\fR, in any combination of case, are also recognized as floating point
values.  An operand that doesn't have a numeric interpretation must be quoted
with either braces or with double quotes.
A Tcl expression consists of a combination of operands, operators,
parentheses and commas.
White space may be used between the operands and operators and
parentheses (or commas); it is ignored by the expression's instructions.
Where possible, operands are interpreted as integer values.
Integer values may be specified in decimal (the normal case), in binary
(if the first two characters of the operand are \fB0b\fR), in octal
(if the first two characters of the operand are \fB0o\fR), or in hexadecimal
(if the first two characters of the operand are \fB0x\fR).  For
compatibility with older Tcl releases, an octal integer value is also
indicated simply when the first character of the operand is \fB0\fR,
whether or not the second character is also \fBo\fR.
If an operand does not have one of the integer formats given
above, then it is treated as a floating-point number if that is
possible.  Floating-point numbers may be specified in any of several
common formats making use of the decimal digits, the decimal point \fB.\fR,
the characters \fBe\fR or \fBE\fR indicating scientific notation, and
the sign characters \fB+\fR or \fB\-\fR.  For example, all of the
following are valid floating-point numbers:  2.1, 3., 6e4, 7.91e+16.
Also recognized as floating point values are the strings \fBInf\fR
and \fBNaN\fR making use of any case for each character.
If no numeric interpretation is possible (note that all literal
operands that are not numeric or boolean must be quoted with either
braces or with double quotes), then an operand is left as a string
(and only a limited set of operators may be applied to it).
.PP
An operand may be specified in any of the following ways:
Operands may be specified in any of the following ways:
.IP [1]
As a numeric value, either integer or floating-point.
.IP [2]
As a boolean value, using any form understood by \fBstring is\fR
\fBboolean\fR.
.IP [3]
As a variable, using standard \fB$\fR notation.
The value of the variable is then the value of the operand.
As a Tcl variable, using standard \fB$\fR notation.
The variable's value will be used as the operand.
.IP [4]
As a string enclosed in double-quotes.
Backslash, variable, and command substitution are performed as described in
\fBTcl\fR.
The expression parser will perform backslash, variable, and
command substitutions on the information between the quotes,
and use the resulting value as the operand
.IP [5]
As a string enclosed in braces.
The characters between the open brace and matching close brace
The operand is treated as a braced value as described in \fBTcl\fR.
will be used as the operand without any substitutions.
.IP [6]
As a Tcl command enclosed in brackets.
Command substitution is performed as described in \fBTcl\fR.
The command will be executed and its result will be used as
the operand.
.IP [7]
As a mathematical function such as \fBsin($x)\fR, whose arguments have any of the above
forms for operands.  See \fBMATH FUNCTIONS\fR below for
As a mathematical function whose arguments have any of the above
forms for operands, such as \fBsin($x)\fR.  See \fBMATH FUNCTIONS\fR below for
a discussion of how mathematical functions are handled.
.PP
Because \fBexpr\fR parses and performs substitutions on values that have
already been parsed and substituted by \fBTcl\fR, it is usually best to enclose
expressions in braces to avoid the first round of substitutions by
Where the above substitutions occur (e.g. inside quoted strings), they
are performed by the expression's instructions.
However, the command parser may already have performed one round of
substitution before the expression processor was called.
As discussed below, it is usually best to enclose expressions
in braces to prevent the command parser from performing substitutions
\fBTcl\fR.
on the contents.
.PP
Below are some examples of simple expressions where the value of \fBa\fR is 3
and the value of \fBb\fR is 6.  The command on the left side of each line
produces the value on the right side.
For some examples of simple expressions, suppose the variable
\fBa\fR has the value 3 and
the variable \fBb\fR has the value 6.
Then the command on the left side of each of the lines below
will produce the value on the right side of the line:
.PP
.CS
.ta 6c
\fBexpr\fR 3.1 + $a	\fI6.1\fR
\fBexpr\fR 2 + "$a.$b"	\fI5.6\fR
\fBexpr\fR 4*[llength "6 2"]	\fI8\fR
\fBexpr\fR {{word one} < "word $a"}	\fI0\fR
.CE
.SS OPERATORS
.PP
For operators having both a numeric mode and a string mode, the numeric mode is
chosen when all operands have a numeric interpretation.  The integer
interpretation of an operand is preferred over the floating-point
interpretation.  To ensure string operations on arbitrary values it is generally a
good idea to use \fBeq\fR, \fBne\fR, or the \fBstring\fR command instead of
more versatile operators such as \fB==\fR.
.PP
Unless otherwise specified, operators accept non-numeric operands.  The value
of a boolean operation is 1 if true, 0 otherwise.  See also \fBstring is\fR
\fBboolean\fR.  The valid operators, most of which are also available as
commands in the \fBtcl::mathop\fR namespace (see \fBmathop\fR(n)), are listed
below, grouped in decreasing order of precedence:
The valid operators (most of which are also available as commands in
the \fBtcl::mathop\fR namespace; see the \fBmathop\fR(n) manual page
for details) are listed below, grouped in decreasing order of precedence:
.TP 20
\fB\-\0\0+\0\0~\0\0!\fR
.
Unary minus, unary plus, bit-wise NOT, logical NOT.  These operators
may only be applied to numeric operands, and bit-wise NOT may only be
applied to integers.
Unary minus, unary plus, bit-wise NOT, logical NOT.  None of these operators
may be applied to string operands, and bit-wise NOT may be
applied only to integers.
.TP 20
\fB**\fR
.
Exponentiation.  Valid for numeric operands.
Exponentiation.  Valid for any numeric operands.
.TP 20
\fB*\0\0/\0\0%\fR
.
Multiply, divide, remainder.  None of these operators may be
Multiply and divide, which are valid for numeric operands, and remainder, which
is valid for integers.  The remainder, an absolute value smaller than the
absolute value of the divisor, has the same sign as the divisor.
applied to string operands, and remainder may be applied only
to integers.
The remainder will always have the same sign as the divisor and
an absolute value smaller than the absolute value of the divisor.
.RS
.PP
When applied to integers, division and remainder can be
considered to partition the number line into a sequence of
adjacent non-overlapping pieces, where each piece is the size of the divisor;
the quotient identifies which piece the dividend lies within, and the
remainder identifies where within that piece the dividend lies. A
When applied to integers, the division and remainder operators can be
considered to partition the number line into a sequence of equal-sized
adjacent non-overlapping pieces where each piece is the size of the divisor;
the division result identifies which piece the divisor lay within, and the
remainder result identifies where within that piece the divisor lay. A
consequence of this is that the result of
.QW "-57 \fB/\fR 10"
is always -6, and the result of
.QW "-57 \fB%\fR 10"
is always 3.
.RE
.TP 20
\fB+\0\0\-\fR
.
Add and subtract.  Valid for numeric operands.
Add and subtract.  Valid for any numeric operands.
.TP 20
\fB<<\0\0>>\fR
.
Left and right shift.  Valid for integers.
Left and right shift.  Valid for integer operands only.
A right shift always propagates the sign bit.
.TP 20
\fB<\0\0>\0\0<=\0\0>=\fR
.
Boolean less than, greater than, less than or equal, and greater than or equal.
Boolean less, greater, less than or equal, and greater than or equal.
Each operator produces 1 if the condition is true, 0 otherwise.
These operators may be applied to strings as well as numeric operands,
in which case string comparison is used.
.TP 20
\fB==\0\0!=\fR
.
Boolean equal and not equal.
Boolean equal and not equal.  Each operator produces a zero/one result.
Valid for all operand types.
.TP 20
\fBeq\0\0ne\fR
.
Boolean string equal and string not equal.
Boolean string equal and string not equal.  Each operator produces a
zero/one result.  The operand types are interpreted only as strings.
.TP 20
\fBin\0\0ni\fR
.
List containment and negated list containment.  The first argument is
interpreted as a string, the second as a list.  \fBin\fR tests for membership
in the list, and \fBni\fR is the inverse.
List containment and negated list containment.  Each operator produces
a zero/one result and treats its first argument as a string and its
second argument as a Tcl list.  The \fBin\fR operator indicates
whether the first argument is a member of the second argument list;
the \fBni\fR operator inverts the sense of the result.
.TP 20
\fB&\fR
.
Bit-wise AND.  Valid for integer operands.
Bit-wise AND.  Valid for integer operands only.
.TP 20
\fB^\fR
.
Bit-wise exclusive OR.  Valid for integer operands.
Bit-wise exclusive OR.  Valid for integer operands only.
.TP 20
\fB|\fR
.
Bit-wise OR.  Valid for integer operands.
Bit-wise OR.  Valid for integer operands only.
.TP 20
\fB&&\fR
.
Logical AND.  If both operands are true, the result is 1, or 0 otherwise.

Logical AND.  Produces a 1 result if both operands are non-zero,
0 otherwise.
Valid for boolean and numeric (integers or floating-point) operands only.
.TP 20
\fB||\fR
.
Logical OR.  If both operands are false, the result is 0, or 1 otherwise.
Logical OR.  Produces a 0 result if both operands are zero, 1 otherwise.
Valid for boolean and numeric (integers or floating-point) operands only.
.TP 20
\fIx\fB?\fIy\fB:\fIz\fR
.
If-then-else, as in C.  If \fIx\fR is false , the result is the value of
\fIy\fR.  Otherwise the result is the value of \fIz\fR.
If-then-else, as in C.  If \fIx\fR
evaluates to non-zero, then the result is the value of \fIy\fR.
Otherwise the result is the value of \fIz\fR.
The \fIx\fR operand must have a boolean or numeric value.
.PP
See the C manual for more details on the results
produced by each operator.
The exponentiation operator promotes types in the same way that the multiply
and divide operators do, and the result is is the same as the result of
\fBpow\fR.
Exponentiation groups right-to-left within a precedence level. Other binary
operators group left-to-right.  For example, the value of
The exponentiation operator promotes types like the multiply and
divide operators, and produces a result that is the same as the output
of the \fBpow\fR function (after any type conversions.)
All of the binary operators but exponentiation group left-to-right
within the same precedence level; exponentiation groups right-to-left.  For example, the command
.PP
.CS
\fBexpr\fR {4*2 < 7}
.CE
.PP
is 0, while the value of
returns 0, while
.PP
.CS
\fBexpr\fR {2**3**2}
.CE
.PP
is 512.
returns 512.
.PP
As in C, \fB&&\fR, \fB||\fR, and \fB?:\fR feature
The \fB&&\fR, \fB||\fR, and \fB?:\fR operators have
.QW "lazy evaluation" ,
which means that operands are not evaluated if they are
not needed to determine the outcome.  For example, in
just as in C, which means that operands are not evaluated if they are
not needed to determine the outcome.  For example, in the command
.PP
.CS
\fBexpr\fR {$v ? [a] : [b]}
.CE
.PP
only one of \fB[a]\fR or \fB[b]\fR is evaluated,
depending on the value of \fB$v\fR.  This is not true of the normal Tcl parser,
only one of
.QW \fB[a]\fR
or
.QW \fB[b]\fR
will actually be evaluated,
depending on the value of \fB$v\fR.  Note, however, that this is
so it is normally recommended to enclose the arguments to \fBexpr\fR in braces.
Without braces, as in
\fBexpr\fR $v ? [a] : [b]
both \fB[a]\fR and \fB[b]\fR are evaluated before \fBexpr\fR is even called.
only true if the entire expression is enclosed in braces;  otherwise
the Tcl parser will evaluate both
.QW \fB[a]\fR
and
.QW \fB[b]\fR
.PP
For more details on the results
before invoking the \fBexpr\fR command.
produced by each operator, see the documentation for C.
.SS "MATH FUNCTIONS"
.PP
When the expression parser encounters a mathematical function
A mathematical function such as \fBsin($x)\fR is replaced with a call to an ordinary
Tcl command in the \fBtcl::mathfunc\fR namespace.  The evaluation
of an expression such as
such as \fBsin($x)\fR, it replaces it with a call to an ordinary
Tcl function in the \fBtcl::mathfunc\fR namespace.  The processing
of an expression such as:
.PP
.CS
\fBexpr\fR {sin($x+$y)}
.CE
.PP
is the same in every way as the evaluation of
is the same in every way as the processing of:
.PP
.CS
\fBexpr\fR {[tcl::mathfunc::sin [\fBexpr\fR {$x+$y}]]}
.CE
.PP
which in turn is the same as the evaluation of
which in turn is the same as the processing of:
.PP
.CS
tcl::mathfunc::sin [\fBexpr\fR {$x+$y}]
.CE
.PP
\fBtcl::mathfunc::sin\fR is resolved as described in
\fBNAMESPACE RESOLUTION\fR in the \fBnamespace\fR(n) documentation.   Given the
default value of \fBnamespace path\fR, \fB[namespace
current]::tcl::mathfunc::sin\fR or \fB::tcl::mathfunc::sin\fR are the typical
resolutions.
The executor will search for \fBtcl::mathfunc::sin\fR using the usual
rules for resolving functions in namespaces. Either
\fB::tcl::mathfunc::sin\fR or \fB[namespace
current]::tcl::mathfunc::sin\fR will satisfy the request, and others
may as well (depending on the current \fBnamespace path\fR setting).
.PP
As in C, a mathematical function may accept multiple arguments separated by commas. Thus,
Some mathematical functions have several arguments, separated by commas like in C. Thus:
.PP
.CS
\fBexpr\fR {hypot($x,$y)}
.CE
.PP
becomes
ends up as
.PP
.CS
tcl::mathfunc::hypot $x $y
.CE
.PP
See the \fBmathfunc\fR(n) documentation for the math functions that are
See the \fBmathfunc\fR(n) manual page for the math functions that are
available by default.
.SS "TYPES, OVERFLOW, AND PRECISION"
.PP
When needed to guarantee exact performance, internal computations involving
integers use the LibTomMath multiple precision integer library.  In Tcl releases
prior to 8.5, integer calculations were performed using one of the C types
All internal computations involving integers are done calling on the
LibTomMath multiple precision integer library as required so that all
integer calculations are performed exactly.  Note that in Tcl releases
prior to 8.5, integer calculations were performed with one of the C types
\fIlong int\fR or \fITcl_WideInt\fR, causing implicit range truncation
in those calculations where values overflowed the range of those types.
Any code that relied on these implicit truncations should instead call
\fBint()\fR or \fBwide()\fR, which do truncate.
Any code that relied on these implicit truncations will need to explicitly
add \fBint()\fR or \fBwide()\fR function calls to expressions at the points
where such truncation is required to take place.
.PP
Internal floating-point computations are
performed using the \fIdouble\fR C type.
When converting a string to floating-point value, exponent overflow is
All internal computations involving floating-point are
done with the C type \fIdouble\fR.
When converting a string to floating-point, exponent overflow is
detected and results in the \fIdouble\fR value of \fBInf\fR or
\fB\-Inf\fR as appropriate.  Floating-point overflow and underflow
are detected to the degree supported by the hardware, which is generally
fairly reliable.
pretty reliable.
.PP
Conversion among internal representations for integer, floating-point, and
string operands is done automatically as needed.  For arithmetic computations,
integers are used until some floating-point number is introduced, after which
floating-point values are used.  For example,
Conversion among internal representations for integer, floating-point,
and string operands is done automatically as needed.
For arithmetic computations, integers are used until some
floating-point number is introduced, after which floating-point is used.
For example,
.PP
.CS
\fBexpr\fR {5 / 4}
.CE
.PP
returns 1, while
.PP
.CS
\fBexpr\fR {5 / 4.0}
\fBexpr\fR {5 / ( [string length "abcd"] + 0.0 )}
.CE
.PP
both return 1.25.
A floating-point result can be distinguished from an integer result by the
Floating-point values are always returned with a
presence of either
.QW \fB.\fR
or
or an
.QW \fBe\fR
.PP
. For example,
so that they will not look like integer values.  For example,
.PP
.CS
\fBexpr\fR {20.0/5.0}
.CE
.PP
returns \fB4.0\fR, not \fB4\fR.
.SS "STRING OPERATIONS"
.PP
String values may be used as operands of the comparison operators,
although the expression evaluator tries to do comparisons as integer
or floating-point when it can,
i.e., when all arguments to the operator allow numeric interpretations,
except in the case of the \fBeq\fR and \fBne\fR operators.
If one of the operands of a comparison is a string and the other
has a numeric value, a canonical string representation of the numeric
operand value is generated to compare with the string operand.
Canonical string representation for integer values is a decimal string
format.  Canonical string representation for floating-point values
is that produced by the \fB%g\fR format specifier of Tcl's
\fBformat\fR command.  For example, the commands
.PP
.CS
\fBexpr\fR {"0x03" > "2"}
\fBexpr\fR {"0y" > "0x12"}
.CE
.PP
both return 1.  The first comparison is done using integer
comparison, and the second is done using string comparison.
Because of Tcl's tendency to treat values as numbers whenever
possible, it is not generally a good idea to use operators like \fB==\fR
when you really want string comparison and the values of the
operands could be arbitrary;  it is better in these cases to use
the \fBeq\fR or \fBne\fR operators, or the \fBstring\fR command instead.
.SH "PERFORMANCE CONSIDERATIONS"
.PP
Where an expression contains syntax that Tcl would otherwise perform
Enclose expressions in braces for the best speed and the smallest
substitutions on, enclosing an expression in braces or otherwise quoting it
so that it's a static value allows the Tcl compiler to generate bytecode for
the expression, resulting in better speed and smaller storage requirements.
This also avoids issues that can arise if Tcl is allowed to perform
storage requirements.
This allows the Tcl bytecode compiler to generate the best code.
substitution on the value before \fBexpr\fR is called.
.PP
In the following example, the value of the expression is 11 because the Tcl parser first
substitutes \fB$b\fR and \fBexpr\fR then substitutes \fB$a\fR.  Enclosing the
As mentioned above, expressions are substituted twice:
once by the Tcl parser and once by the \fBexpr\fR command.
expression in braces would result in a syntax error.
For example, the commands
.PP
.CS
set a 3
set b {$a + 2}
\fBexpr\fR $b*4
.CE
.PP

When an expression is generated at runtime, like the one above is, the bytcode
compiler must ensure that new code is generated each time the expression
return 11, not a multiple of 4.
This is because the Tcl parser will first substitute \fB$a + 2\fR for
the variable \fBb\fR,
is evaluated.  This is the most costly kind of expression from a performance
perspective.  In such cases, consider directly using the commands described in
the \fBmathfunc\fR(n) or \fBmathop\fR(n) documentation instead of \fBexpr\fR.

Most expressions are not formed at runtime, but are literal strings or contain
substitutions that don't introduce other substitutions.  To allow the bytecode
compiler to work with an expression as a string literal at compilation time,
ensure that it contains no substitutions or that it is enclosed in braces or
otherwise quoted to prevent Tcl from performing substitutions, allowing
\fBexpr\fR to perform them instead.
then the \fBexpr\fR command will evaluate the expression \fB$a + 2*4\fR.
.PP
Most expressions do not require a second round of substitutions.
Either they are enclosed in braces or, if not,
their variable and command substitutions yield numbers or strings
that do not themselves require substitutions.
However, because a few unbraced expressions
need two rounds of substitutions,
the bytecode compiler must emit
additional instructions to handle this situation.
The most expensive code is required for
unbraced expressions that contain command substitutions.
These expressions must be implemented by generating new code
each time the expression is executed.
When the expression is unbraced to allow the substitution of a function or
operator, consider using the commands documented in the \fBmathfunc\fR(n) or
\fBmathop\fR(n) manual pages directly instead.
.SH EXAMPLES
.PP
A numeric comparison whose result is 1:
.CS
\fBexpr\fR {"0x03" > "2"}
.CE
.PP
A string comparison whose result is 1:
.CS
\fBexpr\fR {"0y" > "0x12"}
.CE
.PP
Define a procedure that computes an
.QW interesting
mathematical function:
.PP
.CS
proc tcl::mathfunc::calc {x y} {