.sp
int
\fBTcl_GetEncodingFromObj\fR(\fIinterp, objPtr, encodingPtr\fR)
.sp
char *
\fBTcl_ExternalToUtfDString\fR(\fIencoding, src, srcLen, dstPtr\fR)
.sp
size_t
\fBTcl_ExternalToUtfDStringEx\fR(\fIencoding, src, srcLen, flags, dstPtr\fR)
.sp
char *
\fBTcl_UtfToExternalDString\fR(\fIencoding, src, srcLen, dstPtr\fR)
.sp
size_t
\fBTcl_UtfToExternalDStringEx\fR(\fIencoding, src, srcLen, flags, dstPtr\fR)
.sp
int
\fBTcl_ExternalToUtf\fR(\fIinterp, encoding, src, srcLen, flags, statePtr,
                  dst, dstLen, srcReadPtr, dstWrotePtr, dstCharsPtr\fR)
.sp
int
\fBTcl_UtfToExternal\fR(\fIinterp, encoding, src, srcLen, flags, statePtr,
                  dst, dstLen, srcReadPtr, dstWrotePtr, dstCharsPtr\fR)

converted. \fBTCL_ENCODING_END\fR signifies that the source buffer is the last
block in a (potentially multi-block) input stream, telling the conversion
routine to perform any finalization that needs to occur after the last
byte is converted and then to reset to an initial state.
\fBTCL_ENCODING_STOPONERROR\fR signifies that the conversion routine should
return immediately upon reading a source character that does not exist in
the target encoding; otherwise a default fallback character will
automatically be substituted. The flag \fBTCL_ENCODING_NO_THROW\fR has
no effect, it is reserved for Tcl 9.0. The flag \fBTCL_ENCODING_MODIFIED\fR makes
\fBTcl_UtfToExternalDStringEx\fR and \fBTcl_UtfToExternal\fR produce the
byte sequence \exC0\ex80 in stead of \ex00, for the utf-8/cesu-8 encoders.
.AP Tcl_EncodingState *statePtr in/out
Used when converting a (generally long or indefinite length) byte stream
in a piece-by-piece fashion.  The conversion routine stores its current
state in \fI*statePtr\fR after \fIsrc\fR (the buffer containing the
current piece) has been converted; that state information must be passed
back when converting the next piece of the stream so the conversion
routine knows what state it was in when it left off at the end of the

\fBTcl_ExternalToUtfDString\fR converts a source buffer \fIsrc\fR from the
specified \fIencoding\fR into UTF-8.  The converted bytes are stored in
\fIdstPtr\fR, which is then null-terminated.  The caller should eventually
call \fBTcl_DStringFree\fR to free any information stored in \fIdstPtr\fR.
When converting, if any of the characters in the source buffer cannot be
represented in the target encoding, a default fallback character will be
used.  The return value is a pointer to the value stored in the DString.
.PP
\fBTcl_ExternalToUtfDStringEx\fR is the same as \fBTcl_ExternalToUtfDString\fR,
but it has an additional flags parameter.  The return value is the index of
the first byte in the input string causing a conversion error.
Or (size_t)-1 if all is OK.
.PP
\fBTcl_ExternalToUtf\fR converts a source buffer \fIsrc\fR from the specified
\fIencoding\fR into UTF-8.  Up to \fIsrcLen\fR bytes are converted from the
source buffer and up to \fIdstLen\fR converted bytes are stored in \fIdst\fR.
In all cases, \fI*srcReadPtr\fR is filled with the number of bytes that were
successfully converted from \fIsrc\fR and \fI*dstWrotePtr\fR is filled with
the corresponding number of bytes that were stored in \fIdst\fR.  The return

into the specified \fIencoding\fR.  The converted bytes are stored in
\fIdstPtr\fR, which is then terminated with the appropriate encoding-specific
null.  The caller should eventually call \fBTcl_DStringFree\fR to free any
information stored in \fIdstPtr\fR.  When converting, if any of the
characters in the source buffer cannot be represented in the target
encoding, a default fallback character will be used.  The return value is
a pointer to the value stored in the DString.
.PP
\fBTcl_UtfToExternalDStringEx\fR is the same as \fBTcl_UtfToExternalDString\fR,
but it has an additional flags parameter.  The return value is the index of
the first byte of an utf-8 byte-sequence in the input string causing a
conversion error. Or (size_t)-1 if all is OK.
.PP
\fBTcl_UtfToExternal\fR converts a source buffer \fIsrc\fR from UTF-8 into
the specified \fIencoding\fR.  Up to \fIsrcLen\fR bytes are converted from
the source buffer and up to \fIdstLen\fR converted bytes are stored in
\fIdst\fR.  In all cases, \fI*srcReadPtr\fR is filled with the number of
bytes that were successfully converted from \fIsrc\fR and \fI*dstWrotePtr\fR
is filled with the corresponding number of bytes that were stored in

}
declare 656 {
    const char *Tcl_UtfPrev(const char *src, const char *start)
}
declare 657 {
    int Tcl_UniCharIsUnicode(int ch)
}
declare 658 {
    size_t Tcl_ExternalToUtfDStringEx(Tcl_Encoding encoding,
	    const char *src, int srcLen, int flags, Tcl_DString *dsPtr)
}
declare 659 {
    size_t Tcl_UtfToExternalDStringEx(Tcl_Encoding encoding,
	    const char *src, int srcLen, int flags, Tcl_DString *dsPtr)
}

# TIP #511
declare 660 {
    int Tcl_AsyncMarkFromSignal(Tcl_AsyncHandler async, int sigNumber)
}

# ----- BASELINE -- FOR -- 8.7.0 ----- #

 *				reset to an initial state. If the source
 *				buffer contains the entire input stream to be
 *				converted, this flag should be set.
 * TCL_ENCODING_STOPONERROR -	If set, the converter returns immediately upon
 *				encountering an invalid byte sequence or a
 *				source character that has no mapping in the
 *				target encoding. If clear, the converter
 *				substitutes the problematic character(s) with
 *				one or more "close" characters in the
 *				destination buffer and then continues to
 *				convert the source. Only for Tcl 8.x.
 * TCL_ENCODING_NO_TERMINATE - 	If set, Tcl_ExternalToUtf does not append a
 *				terminating NUL byte.  Since it does not need
 *				an extra byte for a terminating NUL, it fills
 *				all dstLen bytes with encoded UTF-8 content if
 *				needed.  If clear, a byte is reserved in the
 *				dst space for NUL termination, and a
 *				terminating NUL is appended.
 * TCL_ENCODING_CHAR_LIMIT -	If set and dstCharsPtr is not NULL, then
 *				Tcl_ExternalToUtf takes the initial value of
 *				*dstCharsPtr as a limit of the maximum number
 *				of chars to produce in the encoded UTF-8
 *				content.  Otherwise, the number of chars
 *				produced is controlled only by other limiting
 *				factors.
 * TCL_ENCODING_MODIFIED -	Convert NULL bytes to \xC0\x80 in stead of
 *				0x00. Only valid for "utf-8" and "cesu-8".
 *				This flag is implicit for external -> internal conversions,
 *				optional for internal -> external conversions.
 * TCL_ENCODING_NO_THROW -	If set, the converter
 *				substitutes the problematic character(s) with
 *				one or more "close" characters in the
 *				destination buffer and then continues to
 *				convert the source. If clear, the converter returns
 *				immediately upon encountering an invalid byte sequence
 *				or a source character that has no mapping in the
 *				target encoding. Only for Tcl 9.x.
 */

#define TCL_ENCODING_START		0x01
#define TCL_ENCODING_END		0x02
#define TCL_ENCODING_STOPONERROR	0x04
#define TCL_ENCODING_NO_TERMINATE	0x08
#define TCL_ENCODING_CHAR_LIMIT		0x10
#define TCL_ENCODING_MODIFIED		0x20
#define TCL_ENCODING_NO_THROW		0x40

/*
 * The following definitions are the error codes returned by the conversion
 * routines:
 *
 * TCL_OK -			All characters were converted.
 * TCL_CONVERT_NOSPACE -	The output buffer would not have been large

 */

Tcl_Command
TclInitEncodingCmd(
    Tcl_Interp* interp)		/* Tcl interpreter */
{
    static const EnsembleImplMap encodingImplMap[] = {
	{"convertfrom", EncodingConvertfromObjCmd, TclCompileBasic1To3ArgCmd, NULL, NULL, 0},
	{"convertto",   EncodingConverttoObjCmd,   TclCompileBasic1To3ArgCmd, NULL, NULL, 0},
	{"dirs",        EncodingDirsObjCmd,        TclCompileBasic0Or1ArgCmd, NULL, NULL, 1},
	{"names",       EncodingNamesObjCmd,       TclCompileBasic0ArgCmd,    NULL, NULL, 0},
	{"system",      EncodingSystemObjCmd,      TclCompileBasic0Or1ArgCmd, NULL, NULL, 1},
	{NULL,          NULL,                      NULL,                      NULL, NULL, 0}
    };

    return TclMakeEnsemble(interp, "encoding", encodingImplMap);

    Tcl_Obj *const objv[])	/* Argument objects. */
{
    Tcl_Obj *data;		/* Byte array to convert */
    Tcl_DString ds;		/* Buffer to hold the string */
    Tcl_Encoding encoding;	/* Encoding to use */
    int length;			/* Length of the byte array being converted */
    const char *bytesPtr;	/* Pointer to the first byte of the array */
#if TCL_MAJOR_VERSION > 8 || defined(TCL_NO_DEPRECATED)
    int flags = TCL_ENCODING_STOPONERROR;
#else
    int flags = TCL_ENCODING_NO_THROW;
#endif
    size_t result;

    if (objc == 2) {
	encoding = Tcl_GetEncoding(interp, NULL);
	data = objv[1];
    } else if ((unsigned)(objc - 2) < 3) {
	data = objv[objc - 1];
	bytesPtr = Tcl_GetString(objv[1]);
	if (bytesPtr[0] == '-' && bytesPtr[1] == 'n'
		&& !strncmp(bytesPtr, "-nothrow", strlen(bytesPtr))) {
	    flags = TCL_ENCODING_NO_THROW;
	} else if (bytesPtr[0] == '-' && bytesPtr[1] == 's'
		&& !strncmp(bytesPtr, "-stoponerror", strlen(bytesPtr))) {
	    flags = TCL_ENCODING_STOPONERROR;
	} else if (objc < 4) {
	    if (Tcl_GetEncodingFromObj(interp, objv[objc - 2], &encoding) != TCL_OK) {
		return TCL_ERROR;
	    }
	    goto encConvFromOK;
	} else {
	    goto encConvFromError;
	}
	if (objc < 4) {
	    encoding = Tcl_GetEncoding(interp, NULL);
	} else if (Tcl_GetEncodingFromObj(interp, objv[objc - 2], &encoding) != TCL_OK) {
	    return TCL_ERROR;
	}
    } else {
    encConvFromError:
	Tcl_WrongNumArgs(interp, 1, objv, "?-nothrow? ?encoding? data");
	return TCL_ERROR;
    }

encConvFromOK:
    /*
     * Convert the string into a byte array in 'ds'
     */
#if !defined(TCL_NO_DEPRECATED) && (TCL_MAJOR_VERSION < 9)
    if (!(flags & TCL_ENCODING_STOPONERROR)) {
	bytesPtr = (char *) Tcl_GetByteArrayFromObj(data, &length);
    } else
#endif
    bytesPtr = (char *) TclGetBytesFromObj(interp, data, &length);
    if (bytesPtr == NULL) {
	return TCL_ERROR;
    }
    result = Tcl_ExternalToUtfDStringEx(encoding, bytesPtr, length,
	    flags, &ds);
    if ((flags & TCL_ENCODING_STOPONERROR) && (result != (size_t)-1)) {
	char buf[TCL_INTEGER_SPACE];
	sprintf(buf, "%" TCL_Z_MODIFIER "u", result);
	Tcl_SetObjResult(interp, Tcl_ObjPrintf("unexpected byte sequence starting at index %"
		TCL_Z_MODIFIER "u: '\\x%X'", result, UCHAR(bytesPtr[result])));
	Tcl_SetErrorCode(interp, "TCL", "ENCODING", "ILLEGALSEQUENCE",
		buf, NULL);
	Tcl_DStringFree(&ds);
	return TCL_ERROR;
    }

    /*
     * Note that we cannot use Tcl_DStringResult here because it will
     * truncate the string at the first null byte.
     */

    Tcl_SetObjResult(interp, TclDStringToObj(&ds));

    Tcl_Obj *const objv[])	/* Argument objects. */
{
    Tcl_Obj *data;		/* String to convert */
    Tcl_DString ds;		/* Buffer to hold the byte array */
    Tcl_Encoding encoding;	/* Encoding to use */
    int length;			/* Length of the string being converted */
    const char *stringPtr;	/* Pointer to the first byte of the string */
    size_t result;
#if TCL_MAJOR_VERSION > 8 || defined(TCL_NO_DEPRECATED)
    int flags = TCL_ENCODING_STOPONERROR;
#else
    int flags = TCL_ENCODING_NO_THROW;
#endif

    if (objc == 2) {
	encoding = Tcl_GetEncoding(interp, NULL);
	data = objv[1];
    } else if ((unsigned)(objc - 2) < 3) {
	data = objv[objc - 1];
	stringPtr = Tcl_GetString(objv[1]);
	if (stringPtr[0] == '-' && stringPtr[1] == 'n'
		&& !strncmp(stringPtr, "-nothrow", strlen(stringPtr))) {
	    flags = TCL_ENCODING_NO_THROW;
	} else if (stringPtr[0] == '-' && stringPtr[1] == 's'
		&& !strncmp(stringPtr, "-stoponerror", strlen(stringPtr))) {
	    flags = TCL_ENCODING_STOPONERROR;
	} else if (objc < 4) {
	    if (Tcl_GetEncodingFromObj(interp, objv[objc - 2], &encoding) != TCL_OK) {
		return TCL_ERROR;
	    }
	    goto encConvToOK;
	} else {
	    goto encConvToError;
	}
	if (objc < 4) {
	    encoding = Tcl_GetEncoding(interp, NULL);
	} else if (Tcl_GetEncodingFromObj(interp, objv[objc - 2], &encoding) != TCL_OK) {
	    return TCL_ERROR;
	}
    } else {
    encConvToError:
	Tcl_WrongNumArgs(interp, 1, objv, "?-nothrow? ?encoding? data");
	return TCL_ERROR;
    }

encConvToOK:
    /*
     * Convert the string to a byte array in 'ds'
     */

    stringPtr = TclGetStringFromObj(data, &length);
    result = Tcl_UtfToExternalDStringEx(encoding, stringPtr, length,
	    flags, &ds);
    if ((flags & TCL_ENCODING_STOPONERROR) && (result != (size_t)-1)) {
	size_t pos = Tcl_NumUtfChars(stringPtr, result);
	int ucs4;
	char buf[TCL_INTEGER_SPACE];
	TclUtfToUCS4(&stringPtr[result], &ucs4);
	sprintf(buf, "%" TCL_Z_MODIFIER "u", result);
	Tcl_SetObjResult(interp, Tcl_ObjPrintf("unexpected character at index %"
		TCL_Z_MODIFIER "u: 'U+%06X'", pos, ucs4));
	Tcl_SetErrorCode(interp, "TCL", "ENCODING", "ILLEGALSEQUENCE",
		buf, NULL);
	Tcl_DStringFree(&ds);
	return TCL_ERROR;
    }
    Tcl_SetObjResult(interp,
		     Tcl_NewByteArrayObj((unsigned char*) Tcl_DStringValue(&ds),
					 Tcl_DStringLength(&ds)));
    Tcl_DStringFree(&ds);

    /*
     * We're done with the encoding

EXTERN int		Tcl_UtfCharComplete(const char *src, int length);
/* 655 */
EXTERN const char *	Tcl_UtfNext(const char *src);
/* 656 */
EXTERN const char *	Tcl_UtfPrev(const char *src, const char *start);
/* 657 */
EXTERN int		Tcl_UniCharIsUnicode(int ch);
/* 658 */
EXTERN size_t		Tcl_ExternalToUtfDStringEx(Tcl_Encoding encoding,
				const char *src, int srcLen, int flags,
				Tcl_DString *dsPtr);
/* 659 */
EXTERN size_t		Tcl_UtfToExternalDStringEx(Tcl_Encoding encoding,
				const char *src, int srcLen, int flags,
				Tcl_DString *dsPtr);
/* 660 */
EXTERN int		Tcl_AsyncMarkFromSignal(Tcl_AsyncHandler async,
				int sigNumber);

typedef struct {
    const struct TclPlatStubs *tclPlatStubs;
    const struct TclIntStubs *tclIntStubs;

    char * (*tclGetStringFromObj) (Tcl_Obj *objPtr, size_t *lengthPtr); /* 651 */
    Tcl_UniChar * (*tclGetUnicodeFromObj) (Tcl_Obj *objPtr, size_t *lengthPtr); /* 652 */
    unsigned char * (*tclGetByteArrayFromObj) (Tcl_Obj *objPtr, size_t *numBytesPtr); /* 653 */
    int (*tcl_UtfCharComplete) (const char *src, int length); /* 654 */
    const char * (*tcl_UtfNext) (const char *src); /* 655 */
    const char * (*tcl_UtfPrev) (const char *src, const char *start); /* 656 */
    int (*tcl_UniCharIsUnicode) (int ch); /* 657 */
    size_t (*tcl_ExternalToUtfDStringEx) (Tcl_Encoding encoding, const char *src, int srcLen, int flags, Tcl_DString *dsPtr); /* 658 */
    size_t (*tcl_UtfToExternalDStringEx) (Tcl_Encoding encoding, const char *src, int srcLen, int flags, Tcl_DString *dsPtr); /* 659 */
    int (*tcl_AsyncMarkFromSignal) (Tcl_AsyncHandler async, int sigNumber); /* 660 */
} TclStubs;

extern const TclStubs *tclStubsPtr;

#ifdef __cplusplus
}

	(tclStubsPtr->tcl_UtfCharComplete) /* 654 */
#define Tcl_UtfNext \
	(tclStubsPtr->tcl_UtfNext) /* 655 */
#define Tcl_UtfPrev \
	(tclStubsPtr->tcl_UtfPrev) /* 656 */
#define Tcl_UniCharIsUnicode \
	(tclStubsPtr->tcl_UniCharIsUnicode) /* 657 */
#define Tcl_ExternalToUtfDStringEx \
	(tclStubsPtr->tcl_ExternalToUtfDStringEx) /* 658 */
#define Tcl_UtfToExternalDStringEx \
	(tclStubsPtr->tcl_UtfToExternalDStringEx) /* 659 */
#define Tcl_AsyncMarkFromSignal \
	(tclStubsPtr->tcl_AsyncMarkFromSignal) /* 660 */

#endif /* defined(USE_TCL_STUBS) */

/* !END!: Do not edit above this line. */

 *
 * Side effects:
 *	Depends on the memory, object, and IO subsystems.
 *
 *---------------------------------------------------------------------------
 */


/* Since TCL_ENCODING_MODIFIED is only used for utf-8/cesu-8 and
 * TCL_ENCODING_LE is only used for  utf-16/utf-32/ucs-2. re-use the same value */

#define TCL_ENCODING_LE		TCL_ENCODING_MODIFIED	/* Little-endian encoding */
#define TCL_ENCODING_UTF	0x200	/* For UTF-8 encoding, allow 4-byte output sequences */

void
TclInitEncodingSubsystem(void)
{
    Tcl_EncodingType type;

				 * for the default system encoding. */
    const char *src,		/* Source string in specified encoding. */
    int srcLen,			/* Source string length in bytes, or < 0 for
				 * encoding-specific string length. */
    Tcl_DString *dstPtr)	/* Uninitialized or free DString in which the
				 * converted string is stored. */
{
    Tcl_ExternalToUtfDStringEx(encoding, src, srcLen, 0, dstPtr);
    return Tcl_DStringValue(dstPtr);
}


/*
 *-------------------------------------------------------------------------
 *
 * Tcl_ExternalToUtfDStringEx --
 *
 *	Convert a source buffer from the specified encoding into UTF-8.
*	The parameter flags controls the behavior, if any of the bytes in
 *	the source buffer are invalid or cannot be represented in utf-8.
 *	Possible flags values:
 *	TCL_ENCODING_STOPONERROR: don't replace invalid characters/bytes but
 *	return the first error position (Default in Tcl 9.0).
 *	TCL_ENCODING_NO_THROW: replace invalid characters/bytes by a default
 *	fallback character. Always return -1 (Default in Tcl 8.7).
 *	TCL_ENCODING_MODIFIED: convert NULL bytes to \xC0\x80 in stead of 0x00.
 *	Only valid for "utf-8" and "cesu-8". This flag may be used together
 *	with the other flags.
 *
 * Results:
 *	The converted bytes are stored in the DString, which is then NULL
 *	terminated in an encoding-specific manner. The return value is
 *	the error position in the source string or -1 if no conversion error
 *	is reported.
  *
 * Side effects:
 *	None.
 *
 *-------------------------------------------------------------------------
 */

size_t
Tcl_ExternalToUtfDStringEx(
    Tcl_Encoding encoding,	/* The encoding for the source string, or NULL
				 * for the default system encoding. */
    const char *src,		/* Source string in specified encoding. */
    int srcLen,			/* Source string length in bytes, or < 0 for
				 * encoding-specific string length. */
    int flags,			/* Conversion control flags. */
    Tcl_DString *dstPtr)	/* Uninitialized or free DString in which the
				 * converted string is stored. */
{
    char *dst;
    Tcl_EncodingState state;
    const Encoding *encodingPtr;
    int dstLen, result, soFar, srcRead, dstWrote, dstChars;
    const char *srcStart = src;

    Tcl_DStringInit(dstPtr);
    dst = Tcl_DStringValue(dstPtr);
    dstLen = dstPtr->spaceAvl - 1;

    if (encoding == NULL) {
	encoding = systemEncoding;
    }
    encodingPtr = (Encoding *) encoding;

    if (src == NULL) {
	srcLen = 0;
    } else if (srcLen < 0) {
	srcLen = encodingPtr->lengthProc(src);
    }

    flags |= TCL_ENCODING_START | TCL_ENCODING_END;
    if (encodingPtr->toUtfProc == UtfToUtfProc) {
	flags |= TCL_ENCODING_MODIFIED | TCL_ENCODING_UTF;
    }

    while (1) {
	result = encodingPtr->toUtfProc(encodingPtr->clientData, src, srcLen,
		flags, &state, dst, dstLen, &srcRead, &dstWrote, &dstChars);
	soFar = dst + dstWrote - Tcl_DStringValue(dstPtr);

	src += srcRead;
	if (result != TCL_CONVERT_NOSPACE) {
	    Tcl_DStringSetLength(dstPtr, soFar);
	    return (result == TCL_OK) ? (size_t)-1 : (size_t)(src - srcStart);
	}
	flags &= ~TCL_ENCODING_START;
	srcLen -= srcRead;
	if (Tcl_DStringLength(dstPtr) == 0) {
	    Tcl_DStringSetLength(dstPtr, dstLen);
	}
	Tcl_DStringSetLength(dstPtr, 2 * Tcl_DStringLength(dstPtr) + 1);

				 * NULL for the default system encoding. */
    const char *src,		/* Source string in UTF-8. */
    int srcLen,			/* Source string length in bytes, or < 0 for
				 * strlen(). */
    Tcl_DString *dstPtr)	/* Uninitialized or free DString in which the
				 * converted string is stored. */
{
    Tcl_UtfToExternalDStringEx(encoding, src, srcLen, 0, dstPtr);
    return Tcl_DStringValue(dstPtr);
}


/*
 *-------------------------------------------------------------------------
 *
 * Tcl_UtfToExternalDStringEx --
 *
 *	Convert a source buffer from UTF-8 to the specified encoding.
 *	The parameter flags controls the behavior, if any of the bytes in
 *	the source buffer are invalid or cannot be represented in the
 *	target encoding.
 *	Possible flags values:
 *	TCL_ENCODING_STOPONERROR: don't replace invalid characters/bytes but
 *	return the first error position (Default in Tcl 9.0).
 *	TCL_ENCODING_NO_THROW: replace invalid characters/bytes by a default
 *	fallback character. Always return -1 (Default in Tcl 8.7).
 *	TCL_ENCODING_MODIFIED: convert NULL bytes to \xC0\x80 in stead of 0x00.
 *	Only valid for "utf-8" and "cesu-8". This flag may be used together
 *	with the other flags.
 *
 * Results:
 *	The converted bytes are stored in the DString, which is then NULL
 *	terminated in an encoding-specific manner. The return value is
 *	the error position in the source string or -1 if no conversion error
 *	is reported.
 *
 * Side effects:
 *	None.
 *
 *-------------------------------------------------------------------------
 */

size_t
Tcl_UtfToExternalDStringEx(
    Tcl_Encoding encoding,	/* The encoding for the converted string, or
				 * NULL for the default system encoding. */
    const char *src,		/* Source string in UTF-8. */
    int srcLen,			/* Source string length in bytes, or < 0 for
				 * strlen(). */
    int flags,	/* Conversion control flags. */
    Tcl_DString *dstPtr)	/* Uninitialized or free DString in which the
				 * converted string is stored. */
{
    char *dst;
    Tcl_EncodingState state;
    const Encoding *encodingPtr;
    int dstLen, result, soFar, srcRead, dstWrote, dstChars;
    const char *srcStart = src;

    Tcl_DStringInit(dstPtr);
    dst = Tcl_DStringValue(dstPtr);
    dstLen = dstPtr->spaceAvl - 1;

    if (encoding == NULL) {
	encoding = systemEncoding;
    }
    encodingPtr = (Encoding *) encoding;

    if (src == NULL) {
	srcLen = 0;
    } else if (srcLen < 0) {
	srcLen = strlen(src);
    }
    flags |= TCL_ENCODING_START | TCL_ENCODING_END;
    while (1) {
	result = encodingPtr->fromUtfProc(encodingPtr->clientData, src,
		srcLen, flags, &state, dst, dstLen,
		&srcRead, &dstWrote, &dstChars);
	soFar = dst + dstWrote - Tcl_DStringValue(dstPtr);

	src += srcRead;
	if (result != TCL_CONVERT_NOSPACE) {
	    int i = soFar + encodingPtr->nullSize - 1;
	    while (i >= soFar) {
		Tcl_DStringSetLength(dstPtr, i--);
	    }
	    return (result == TCL_OK) ? (size_t)-1 : (size_t)(src - srcStart);
	}

	flags &= ~TCL_ENCODING_START;
	srcLen -= srcRead;
	if (Tcl_DStringLength(dstPtr) == 0) {
	    Tcl_DStringSetLength(dstPtr, dstLen);
	}

 *	Returns TCL_OK if conversion was successful.
 *
 * Side effects:
 *	None.
 *
 *-------------------------------------------------------------------------
 */

#if TCL_MAJOR_VERSION > 8 || defined(TCL_NO_DEPRECATED)
#   define STOPONERROR !(flags & TCL_ENCODING_NO_THROW)
#else
#   define STOPONERROR (flags & TCL_ENCODING_STOPONERROR)
#endif

static int
UtfToUtfProc(
    ClientData clientData,	/* additional flags, e.g. TCL_ENCODING_MODIFIED */
    const char *src,		/* Source string in UTF-8. */
    int srcLen,			/* Source string length in bytes. */
    int flags,			/* Conversion control flags. */

	     * Always check before using TclUtfToUCS4. Not doing can so
	     * cause it run beyond the end of the buffer! If we happen such an
	     * incomplete char its bytes are made to represent themselves
	     * unless the user has explicitly asked to be told.
	     */

	    if (flags & TCL_ENCODING_MODIFIED) {
		if (STOPONERROR) {
		    result = TCL_CONVERT_MULTIBYTE;
		    break;
		}
		ch = UCHAR(*src++);
	    } else {
		char chbuf[2];
		chbuf[0] = UCHAR(*src++); chbuf[1] = 0;
		TclUtfToUCS4(chbuf, &ch);
	    }
	    dst += Tcl_UniCharToUtf(ch, dst);
	} else {
	    int low;
	    const char *saveSrc = src;
	    size_t len = TclUtfToUCS4(src, &ch);
	    if ((len < 2) && (ch != 0) && STOPONERROR
		    && (flags & TCL_ENCODING_MODIFIED)) {
		result = TCL_CONVERT_SYNTAX;
		break;
	    }
	    src += len;
	    if (!(flags & TCL_ENCODING_UTF) && (ch > 0x3FF)) {
		if (ch > 0xFFFF) {

		 * A surrogate character is detected, handle especially.
		 */

		low = ch;
		len = (src <= srcEnd-3) ? TclUtfToUCS4(src, &low) : 0;

		if (((low & ~0x3FF) != 0xDC00) || (ch & 0x400)) {

		    if (STOPONERROR) {
			result = TCL_CONVERT_UNKNOWN;
			src = saveSrc;
			break;
		    }
		    if (!(flags & TCL_ENCODING_MODIFIED)) {
			ch = 0xFFFD;
		    }
		cesu8:
		    *dst++ = (char) (((ch >> 12) | 0xE0) & 0xEF);
		    *dst++ = (char) (((ch >> 6) | 0x80) & 0xBF);
		    *dst++ = (char) ((ch | 0x80) & 0xBF);
		    continue;
		}
		src += len;
		dst += Tcl_UniCharToUtf(ch, dst);
		ch = low;
	    } else if (!Tcl_UniCharIsUnicode(ch)) {
		if (STOPONERROR) {
		    result = TCL_CONVERT_UNKNOWN;
		    src = saveSrc;
		    break;
		}
		if (!(flags & TCL_ENCODING_MODIFIED)) {
		    ch = 0xFFFD;
		}

	}
	if (dst > dstEnd) {
	    result = TCL_CONVERT_NOSPACE;
	    break;
	}
	len = TclUtfToUCS4(src, &ch);
	if (!Tcl_UniCharIsUnicode(ch)) {
	    if (STOPONERROR) {
		result = TCL_CONVERT_UNKNOWN;
		break;
	    }
	    ch = 0xFFFD;
	}
	src += len;
	if (flags & TCL_ENCODING_LE) {

	}
	if (dst > dstEnd) {
	    result = TCL_CONVERT_NOSPACE;
	    break;
	}
	len = TclUtfToUCS4(src, &ch);
	if (!Tcl_UniCharIsUnicode(ch)) {
	    if (STOPONERROR) {
		result = TCL_CONVERT_UNKNOWN;
		break;
	    }
	    ch = 0xFFFD;
	}
	src += len;
	if (flags & TCL_ENCODING_LE) {

		break;
	    }
	    ch = toUnicode[byte][*((unsigned char *) src)];
	} else {
	    ch = pageZero[byte];
	}
	if ((ch == 0) && (byte != 0)) {
	    if (STOPONERROR) {
		result = TCL_CONVERT_SYNTAX;
		break;
	    }
	    if (prefixBytes[byte]) {
		src--;
	    }
	    ch = (Tcl_UniChar) byte;

	if (!len) {
	    word = 0;
	} else
#endif
	    word = fromUnicode[(ch >> 8)][ch & 0xFF];

	if ((word == 0) && (ch != 0)) {
	    if (STOPONERROR) {
		result = TCL_CONVERT_UNKNOWN;
		break;
	    }
	    word = dataPtr->fallback;
	}
	if (prefixBytes[(word >> 8)] != 0) {
	    if (dst + 1 > dstEnd) {

	 */

	if (ch > 0xFF
#if TCL_UTF_MAX <= 3
		|| ((ch >= 0xD800) && (len < 3))
#endif
		) {
	    if (STOPONERROR) {
		result = TCL_CONVERT_UNKNOWN;
		break;
	    }
#if TCL_UTF_MAX <= 3
	    if ((ch >= 0xD800) && (len < 3)) {
		len = 4;
	    }

	     * We have a split-up or unrecognized escape sequence. If we
	     * checked all the sequences, then it's a syntax error, otherwise
	     * we need more bytes to determine a match.
	     */

	    if ((checked == dataPtr->numSubTables + 2)
		    || (flags & TCL_ENCODING_END)) {
		if (!STOPONERROR) {
		    /*
		     * Skip the unknown escape sequence.
		     */

		    src += longest;
		    continue;
		}

		if (word != 0) {
		    break;
		}
	    }

	    if (word == 0) {
		state = oldState;
		if (STOPONERROR) {
		    result = TCL_CONVERT_UNKNOWN;
		    break;
		}
		encodingPtr = GetTableEncoding(dataPtr, state);
		tableDataPtr = (const TableEncodingData *)encodingPtr->clientData;
		word = tableDataPtr->fallback;
	    }

    TclGetStringFromObj, /* 651 */
    TclGetUnicodeFromObj, /* 652 */
    TclGetByteArrayFromObj, /* 653 */
    Tcl_UtfCharComplete, /* 654 */
    Tcl_UtfNext, /* 655 */
    Tcl_UtfPrev, /* 656 */
    Tcl_UniCharIsUnicode, /* 657 */
    Tcl_ExternalToUtfDStringEx, /* 658 */
    Tcl_UtfToExternalDStringEx, /* 659 */
    Tcl_AsyncMarkFromSignal, /* 660 */
};

/* !END!: Do not edit above this line. */

# this file, and for a DISCLAIMER OF ALL WARRANTIES.

if {"::tcltest" ni [namespace children]} {
    package require tcltest 2.5
    namespace import -force ::tcltest::*
}

testConstraint nodep [info exists tcl_precision]

namespace eval ::tcl::test::io {

    if {"::tcltest" ni [namespace children]} {
	package require tcltest 2.5
	namespace import -force ::tcltest::*
    }

    set f [open $path(test1) w]
    chan configure $f -encoding ascii -buffering line -translation crlf
    chan puts -nonewline $f "\n12"
    contents $path(test1)
} -cleanup {
    chan close $f
} -result "\r\n12"
test chan-io-3.4 {WriteChars: loop over stage buffer} nodep {
    # stage buffer maps to more than can be queued at once.
    set f [open $path(test1) w]
    chan configure $f -encoding jis0208 -buffersize 16
    chan puts -nonewline $f "\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"
    set x [list [contents $path(test1)]]
    chan close $f
    lappend x [contents $path(test1)]
} [list "!)!)!)!)!)!)!)!)" "!)!)!)!)!)!)!)!)!)!)!)!)!)!)!)"]
test chan-io-3.5 {WriteChars: saved != 0} nodep {
    # Bytes produced by UtfToExternal from end of last channel buffer had to
    # be moved to beginning of next channel buffer to preserve requested
    # buffersize.
    set f [open $path(test1) w]
    chan configure $f -encoding jis0208 -buffersize 17
    chan puts -nonewline $f "\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"
    set x [list [contents $path(test1)]]

    set f [open $path(test1) w]
    chan configure $f -encoding shiftjis -buffersize 16
    chan puts -nonewline $f "12345678901234ＡＢ"
    set x [list [contents $path(test1)]]
    chan close $f
    lappend x [contents $path(test1)]
} [list "12345678901234\x82\x60" "12345678901234\x82\x60\x82\x61"]
test chan-io-3.7 {WriteChars: (bufPtr->nextAdded > bufPtr->length)} nodep {
    # When translating UTF-8 to external, the produced bytes went past end of
    # the channel buffer. This is done on purpose - we then truncate the bytes
    # at the end of the partial character to preserve the requested blocksize
    # on flush. The truncated bytes are moved to the beginning of the next
    # channel buffer.
    set f [open $path(test1) w]
    chan configure $f -encoding jis0208 -buffersize 17

    encoding
} -result {wrong # args: should be "encoding subcommand ?arg ...?"}
test cmdAH-4.2 {Tcl_EncodingObjCmd} -returnCodes error -body {
    encoding foo
} -result {unknown or ambiguous subcommand "foo": must be convertfrom, convertto, dirs, names, or system}
test cmdAH-4.3 {Tcl_EncodingObjCmd} -returnCodes error -body {
    encoding convertto
} -result {wrong # args: should be "encoding convertto ?-nothrow? ?encoding? data"}
test cmdAH-4.4 {Tcl_EncodingObjCmd} -returnCodes error -body {
    encoding convertto foo bar
} -result {unknown encoding "foo"}
test cmdAH-4.5 {Tcl_EncodingObjCmd} -setup {
    set system [encoding system]
} -body {
    encoding system jis0208

    encoding system iso8859-1
    encoding convertto jis0208 乎
} -cleanup {
    encoding system $system
} -result 8C
test cmdAH-4.7 {Tcl_EncodingObjCmd} -returnCodes error -body {
    encoding convertfrom
} -result {wrong # args: should be "encoding convertfrom ?-nothrow? ?encoding? data"}
test cmdAH-4.8 {Tcl_EncodingObjCmd} -returnCodes error -body {
    encoding convertfrom foo bar
} -result {unknown encoding "foo"}
test cmdAH-4.9 {Tcl_EncodingObjCmd} -setup {
    set system [encoding system]
} -body {
    encoding system jis0208

    variable x

catch {
    ::tcltest::loadTestedCommands
    package require -exact tcl::test [info patchlevel]
}

testConstraint deprecated [expr {![info exists tcl_precision]}]

proc toutf {args} {
    variable x
    lappend x "toutf $args"
}
proc fromutf {args} {
    variable x
    lappend x "fromutf $args"

test encoding-11.11 {encoding: extended Unicode UTF-32} {
    viewable [encoding convertto utf-32be 😹]
} "\x00\x01\xF69 (\\u0000\\u0001\\u00F69)"
# OpenEncodingFile is fully tested by the rest of the tests in this file.

test encoding-12.1 {LoadTableEncoding: normal encoding} {
    set x [encoding convertto iso8859-3 Ġ]
    append x [encoding convertto -nothrow iso8859-3 Õ]
    append x [encoding convertfrom iso8859-3 Õ]
} "Õ?Ġ"
test encoding-12.2 {LoadTableEncoding: single-byte encoding} {
    set x [encoding convertto iso8859-3 abĠg]
    append x [encoding convertfrom iso8859-3 abÕg]
} "abÕgabĠg"
test encoding-12.3 {LoadTableEncoding: multi-byte encoding} {

test encoding-15.5 {UtfToUtfProc emoji character input} {
    set x \xF0\x9F\x98\x82
    set y [encoding convertfrom utf-8 \xF0\x9F\x98\x82]
    list [string length $x] $y
} "4 😂"
test encoding-15.6 {UtfToUtfProc emoji character output} {
    set x \uDE02\uD83D\uDE02\uD83D
    set y [encoding convertto -nothrow utf-8 \uDE02\uD83D\uDE02\uD83D]
    binary scan $y H* z
    list [string length $y] $z
} {10 efbfbdf09f9882efbfbd}
test encoding-15.7 {UtfToUtfProc emoji character output} {
    set x \uDE02\uD83D\uD83D
    set y [encoding convertto -nothrow utf-8 \uDE02\uD83D\uD83D]
    binary scan $y H* z
    list [string length $x] [string length $y] $z
} {3 9 efbfbdefbfbdefbfbd}
test encoding-15.8 {UtfToUtfProc emoji character output} {
    set x \uDE02\uD83Dé
    set y [encoding convertto -nothrow utf-8 \uDE02\uD83Dé]
    binary scan $y H* z
    list [string length $x] [string length $y] $z
} {3 8 efbfbdefbfbdc3a9}
test encoding-15.9 {UtfToUtfProc emoji character output} {
    set x \uDE02\uD83DX
    set y [encoding convertto -nothrow utf-8 \uDE02\uD83DX]
    binary scan $y H* z
    list [string length $x] [string length $y] $z
} {3 7 efbfbdefbfbd58}
test encoding-15.10 {UtfToUtfProc high surrogate character output} {
    set x \uDE02é
    set y [encoding convertto -nothrow utf-8 \uDE02é]
    binary scan $y H* z
    list [string length $x] [string length $y] $z
} {2 5 efbfbdc3a9}
test encoding-15.11 {UtfToUtfProc low surrogate character output} {
    set x \uDA02é
    set y [encoding convertto -nothrow utf-8 \uDA02é]
    binary scan $y H* z
    list [string length $x] [string length $y] $z
} {2 5 efbfbdc3a9}
test encoding-15.12 {UtfToUtfProc high surrogate character output} {
    set x \uDE02Y
    set y [encoding convertto -nothrow utf-8 \uDE02Y]
    binary scan $y H* z
    list [string length $x] [string length $y] $z
} {2 4 efbfbd59}
test encoding-15.13 {UtfToUtfProc low surrogate character output} {
    set x \uDA02Y
    set y [encoding convertto -nothrow utf-8 \uDA02Y]
    binary scan $y H* z
    list [string length $x] [string length $y] $z
} {2 4 efbfbd59}
test encoding-15.14 {UtfToUtfProc high surrogate character output} {
    set x \uDE02
    set y [encoding convertto -nothrow utf-8 \uDE02]
    binary scan $y H* z
    list [string length $x] [string length $y] $z
} {1 3 efbfbd}
test encoding-15.15 {UtfToUtfProc low surrogate character output} {
    set x \uDA02
    set y [encoding convertto -nothrow utf-8 \uDA02]
    binary scan $y H* z
    list [string length $x] [string length $y] $z
} {1 3 efbfbd}
test encoding-15.16 {UtfToUtfProc: Invalid 4-byte UTF-8, see [ed29806ba]} {
    set x \xF0\xA0\xA1\xC2
    set y [encoding convertfrom -nothrow utf-8 \xF0\xA0\xA1\xC2]
    list [string length $x] $y
} "4 \xF0\xA0\xA1\xC2"
test encoding-15.17 {UtfToUtfProc emoji character output} {
    set x 😂
    set y [encoding convertto utf-8 😂]
    binary scan $y H* z
    list [string length $y] $z

test encoding-17.1 {UtfToUtf16Proc} -body {
    encoding convertto utf-16 "\U460DC"
} -result "\xD8\xD8\xDC\xDC"
test encoding-17.2 {UtfToUcs2Proc} -body {
    encoding convertfrom utf-16 [encoding convertto ucs-2 "\U460DC"]
} -result "\uFFFD"
test encoding-17.3 {UtfToUtf16Proc} -body {
    encoding convertto -nothrow utf-16be "\uDCDC"
} -result "\xFF\xFD"
test encoding-17.4 {UtfToUtf16Proc} -body {
    encoding convertto -nothrow utf-16le "\uD8D8"
} -result "\xFD\xFF"
test encoding-17.5 {UtfToUtf16Proc} -body {
    encoding convertto utf-32le "\U460DC"
} -result "\xDC\x60\x04\x00"
test encoding-17.6 {UtfToUtf16Proc} -body {
    encoding convertto utf-32be "\U460DC"
} -result "\x00\x04\x60\xDC"

    list $count [viewable $line]
} [list 3 "乎乞也 (\\u4E4E\\u4E5E\\u4E5F)"]

test encoding-24.4 {Parse valid or invalid utf-8} {
    string length [encoding convertfrom utf-8 "\xC0\x80"]
} 1
test encoding-24.5 {Parse valid or invalid utf-8} {
    string length [encoding convertfrom -nothrow utf-8 "\xC0\x81"]
} 2
test encoding-24.6 {Parse valid or invalid utf-8} {
    string length [encoding convertfrom -nothrow utf-8 "\xC1\xBF"]
} 2
test encoding-24.7 {Parse valid or invalid utf-8} {
    string length [encoding convertfrom utf-8 "\xC2\x80"]
} 1
test encoding-24.8 {Parse valid or invalid utf-8} {
    string length [encoding convertfrom -nothrow utf-8 "\xE0\x80\x80"]
} 3
test encoding-24.9 {Parse valid or invalid utf-8} {
    string length [encoding convertfrom -nothrow utf-8 "\xE0\x9F\xBF"]
} 3
test encoding-24.10 {Parse valid or invalid utf-8} {
    string length [encoding convertfrom utf-8 "\xE0\xA0\x80"]
} 1
test encoding-24.11 {Parse valid or invalid utf-8} {
    string length [encoding convertfrom -nothrow utf-8 "\xEF\xBF\xBF"]
} 1
test encoding-24.12 {Parse valid or invalid utf-8} -constraints deprecated -body {
    encoding convertfrom utf-8 "\xC0\x81"
} -returnCodes 1 -result {unexpected byte sequence starting at index 0: '\xC0'}
test encoding-24.13 {Parse valid or invalid utf-8} -constraints deprecated -body {
    encoding convertfrom utf-8 "\xC1\xBF"
} -returnCodes 1 -result {unexpected byte sequence starting at index 0: '\xC1'}
test encoding-24.14 {Parse valid or invalid utf-8} {
    string length [encoding convertfrom utf-8 "\xC2\x80"]
} 1
test encoding-24.15 {Parse valid or invalid utf-8} -constraints deprecated -body {
    encoding convertfrom utf-8 "Z\xE0\x80"
} -returnCodes 1 -result {unexpected byte sequence starting at index 1: '\xE0'}
test encoding-24.16 {Parse valid or invalid utf-8} -constraints {testbytestring deprecated} -body {
    encoding convertto utf-8 [testbytestring "Z\u4343\x80"]
} -returnCodes 1 -result {expected byte sequence but character 1 was '䍃€' (U+004343)}
test encoding-24.17 {Parse valid or invalid utf-8} -constraints {testbytestring deprecated} -body {
    encoding convertto utf-8 [testbytestring "Z\xE0\x80"]
} -result "Z\xC3\xA0\xE2\x82\xAC"
test encoding-24.18 {Parse valid or invalid utf-8} -constraints {testbytestring deprecated} -body {
    encoding convertto utf-8 [testbytestring "Z\xE0\x80xxxxxx"]
} -result "Z\xC3\xA0\xE2\x82\xACxxxxxx"
test encoding-24.19 {Parse valid or invalid utf-8} -constraints deprecated -body {
    encoding convertto utf-8 "ZX\uD800"
} -returnCodes 1 -match glob -result "unexpected character at index 2: 'U+00D800'"
test encoding-24.20 {Parse with -nothrow but without providing encoding} {
    string length [encoding convertfrom -nothrow "\x20"]
} 1
test encoding-24.21 {Parse with -nothrow but without providing encoding} {
    string length [encoding convertto -nothrow "\x20"]
} 1
test encoding-24.22 {Syntax error, two encodings} -body {
    encoding convertfrom iso8859-1 utf-8 "ZX\uD800"
} -returnCodes 1 -result {wrong # args: should be "::tcl::encoding::convertfrom ?-nothrow? ?encoding? data"}
test encoding-24.23 {Syntax error, two encodings} -body {
    encoding convertto iso8859-1 utf-8 "ZX\uD800"
} -returnCodes 1 -result {wrong # args: should be "::tcl::encoding::convertto ?-nothrow? ?encoding? data"}

file delete [file join [temporaryDirectory] iso2022.txt]

#
# Begin jajp encoding round-trip conformity tests
#
proc foreach-jisx0208 {varName command} {

}


test encoding-28.0 {all encodings load} -body {
	set string hello
	foreach name [encoding names] {
		incr count
		encoding convertto -nothrow $name $string

		# discard the cached internal representation of Tcl_Encoding
		# Unfortunately, without this, encoding 2-1 fails.
		llength $name
	}
	return $count
} -result [expr {[info exists ::tcl_precision] ? 92 : 91}]

	$interp eval [list set argv $argv]
	$interp eval [list source [info script]]
	interp delete $interp
	return
    }
}

testConstraint nodep [info exists tcl_precision]

proc bgerror {args} {
    global errorInfo
    puts stderr "http.test bgerror"
    puts stderr [join $args]
    puts stderr $errorInfo
}

} -returnCodes error -body {
    # this would be reverting to http <=2.4 behavior
    http::config -urlencoding ""
    http::mapReply "∈"
} -cleanup {
    http::config -urlencoding $enc
} -result "can't read \"formMap(∈)\": no such element in array"
test http-7.4 {http::formatQuery} -constraints nodep -setup {
    set enc [http::config -urlencoding]
} -body {
    # this would be reverting to http <=2.4 behavior w/o errors
    # (unknown chars become '?')
    http::config -urlencoding "iso8859-1"
    http::mapReply "∈"
} -cleanup {

testConstraint testobj		[llength [info commands testobj]]
testConstraint testservicemode  [llength [info commands testservicemode]]
# Some things fail under Windows in Continuous Integration systems for subtle
# reasons such as CI often running with elevated privileges in a container.
testConstraint notWinCI [expr {
    $::tcl_platform(platform) ne "windows" || ![info exists ::env(CI)]}]
testConstraint notOSX [expr {$::tcl_platform(os) ne "Darwin"}]
testConstraint nodep [info exists tcl_precision]

# You need a *very* special environment to do some tests.  In
# particular, many file systems do not support large-files...
testConstraint largefileSupport [expr {$::tcl_platform(os) ne "Darwin"}]

# some tests can only be run is umask is 2
# if "umask" cannot be run, the tests will be skipped.

    set f [open $path(test1) w]
    fconfigure $f -encoding ascii -buffering line -translation crlf
    puts -nonewline $f "\n12"
    set x [contents $path(test1)]
    close $f
    set x
} "\r\n12"
test io-3.4 {WriteChars: loop over stage buffer} nodep {
    # stage buffer maps to more than can be queued at once.

    set f [open $path(test1) w]
    fconfigure $f -encoding jis0208 -buffersize 16
    puts -nonewline $f "\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"
    set x [list [contents $path(test1)]]
    close $f
    lappend x [contents $path(test1)]
} [list "!)!)!)!)!)!)!)!)" "!)!)!)!)!)!)!)!)!)!)!)!)!)!)!)"]
test io-3.5 {WriteChars: saved != 0} nodep {
    # Bytes produced by UtfToExternal from end of last channel buffer
    # had to be moved to beginning of next channel buffer to preserve
    # requested buffersize.

    set f [open $path(test1) w]
    fconfigure $f -encoding jis0208 -buffersize 17
    puts -nonewline $f "\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"

    set f [open $path(test1) w]
    fconfigure $f -encoding shiftjis -buffersize 16
    puts -nonewline $f "12345678901234ＡＢ"
    set x [list [contents $path(test1)]]
    close $f
    lappend x [contents $path(test1)]
} [list "12345678901234\x82\x60" "12345678901234\x82\x60\x82\x61"]
test io-3.7 {WriteChars: (bufPtr->nextAdded > bufPtr->length)} nodep {
    # When translating UTF-8 to external, the produced bytes went past end
    # of the channel buffer.  This is done purpose -- we then truncate the
    # bytes at the end of the partial character to preserve the requested
    # blocksize on flush.  The truncated bytes are moved to the beginning
    # of the next channel buffer.

    set f [open $path(test1) w]

    close $f
    set f [open $path(test1)]
    fconfigure $f -encoding utf-8 -buffersize 10
    set in [read $f]
    close $f
    scan [string index $in end] %c
} 160
test io-12.9 {ReadChars: multibyte chars split} nodep {
    set f [open $path(test1) w]
    fconfigure $f -translation binary
    puts -nonewline $f [string repeat a 9]\xC2
    close $f
    set f [open $path(test1)]
    fconfigure $f -encoding utf-8 -buffersize 10
    set in [read $f]
    close $f
    scan [string index $in end] %c
} 194
test io-12.10 {ReadChars: multibyte chars split} nodep {
    set f [open $path(test1) w]
    fconfigure $f -translation binary
    puts -nonewline $f [string repeat a 9]\xC2
    close $f
    set f [open $path(test1)]
    fconfigure $f -encoding utf-8 -buffersize 11
    set in [read $f]

# This file contains a collection of tests for generic/tclMain.c.

if {"::tcltest" ni [namespace children]} {
    package require tcltest 2.5
    namespace import -force ::tcltest::*
}

testConstraint nodep [info exists tcl_precision]

namespace eval ::tcl::test::main {
    namespace import ::tcltest::*

    # Is [exec] defined?
    testConstraint exec [llength [info commands exec]]

    # Is the tcl::test package loaded?

	close $f
	removeFile script
    } -result [list script {} 0]\n1\n

    test Tcl_Main-1.8 {
	Tcl_Main: startup script - -encoding option - mismatched encodings
    } -constraints {
	stdio nodep
    } -setup {
	set script [makeFile {} script]
	file delete $script
	set f [open $script w]
	chan configure $f -encoding utf-8
	puts $f {puts [list $argv0 $argv $tcl_interactive]}
	puts -nonewline $f {puts [string equal \u20ac }

} -result foobar
test safe-11.7 {testing safe encoding} -setup {
    set i [safe::interpCreate]
} -body {
    interp eval $i encoding convertfrom
} -returnCodes error -cleanup {
    safe::interpDelete $i
} -result {wrong # args: should be "encoding convertfrom ?-nothrow? ?encoding? data"}
test safe-11.7.1 {testing safe encoding} -setup {
    set i [safe::interpCreate]
} -body {
    catch {interp eval $i encoding convertfrom} m o
    dict get $o -errorinfo
} -returnCodes ok -match glob -cleanup {
    unset -nocomplain m o
    safe::interpDelete $i
} -result {wrong # args: should be "encoding convertfrom ?-nothrow? ?encoding? data"
    while executing
"encoding convertfrom"
    invoked from within
"encoding convertfrom"
    invoked from within
"interp eval $i encoding convertfrom"}
test safe-11.8 {testing safe encoding} -setup {
    set i [safe::interpCreate]
} -body {
    interp eval $i encoding convertto
} -returnCodes error -cleanup {
    safe::interpDelete $i
} -result {wrong # args: should be "encoding convertto ?-nothrow? ?encoding? data"}
test safe-11.8.1 {testing safe encoding} -setup {
    set i [safe::interpCreate]
} -body {
    catch {interp eval $i encoding convertto} m o
    dict get $o -errorinfo
} -returnCodes ok -match glob -cleanup {
    unset -nocomplain m o
    safe::interpDelete $i
} -result {wrong # args: should be "encoding convertto ?-nothrow? ?encoding? data"
    while executing
"encoding convertto"
    invoked from within
"encoding convertto"
    invoked from within
"interp eval $i encoding convertto"}

    puts stderr "Skipping tests in [info script]. tcltest 2.5 required."
    return
}

namespace eval ::tcl::test::source {
    namespace import ::tcltest::*

testConstraint nodep [info exists tcl_precision]

test source-1.1 {source command} -setup {
    set x "old x value"
    set y "old y value"
    set z "old z value"
    set sourcefile [makeFile {
	set x 22
	set y 33

} -body {
    source -encoding utf-8 $sourcefile
    €
} -cleanup {
    removeFile source.file
    rename € {}
} -result foo
test source-7.6 {source -encoding: mismatch encoding error} -constraints nodep -setup {
    set sourcefile [makeFile {} source.file]
    file delete $sourcefile
    set f [open $sourcefile w]
    fconfigure $f -encoding utf-8
    puts $f "proc € {} {return foo}"
    close $f
} -body {