#
# This file is a Makefile for Tcl.  If it has the name "Makefile.in" then it
# is a template for a Makefile; to generate the actual Makefile, run
# "./configure", which is a configuration script generated by the "autoconf"
# program (constructs like "@foo@" will get replaced in the actual Makefile.
#
# RCS: @(#) $Id: Makefile.in,v 1.71.2.54 2009/11/23 16:44:51 dgp Exp $

VERSION = @TCL_VERSION@

#--------------------------------------------------------------------------
# Things you can change to personalize the Makefile for your own site (you can
# make these changes in either Makefile.in or Makefile, but changes to
# Makefile will get lost if you re-run the configuration script).

TCL_LIB_FILE		= @TCL_LIB_FILE@
ZLIB_DLL_FILE		= zlib1.dll
UNICOWS_DLL_FILE	= unicows.dll
DDE_DLL_FILE		= tcldde$(DDEVER)${DLLSUFFIX}
DDE_LIB_FILE		= tcldde$(DDEVER)${LIBSUFFIX}
REG_DLL_FILE		= tclreg$(REGVER)${DLLSUFFIX}
REG_LIB_FILE		= tclreg$(REGVER)${LIBSUFFIX}
TEST_DLL_FILE		= tcltest$(VER)${DLLSUFFIX}
TEST_LIB_FILE		= tcltest$(VER)${LIBSUFFIX}
PIPE_DLL_FILE		= tclpip$(VER)${DLLSUFFIX}

SHARED_LIBRARIES 	= $(TCL_DLL_FILE) @ZLIB_DLL_FILE@ @UNICOWS_DLL_FILE@ $(TCL_STUB_LIB_FILE) \
			  $(DDE_DLL_FILE) $(REG_DLL_FILE) $(TEST_DLL_FILE) $(PIPE_DLL_FILE)
STATIC_LIBRARIES	= $(TCL_LIB_FILE) $(TCL_STUB_LIB_FILE) $(REG_LIB_FILE) $(DDE_LIB_FILE) \
			  $(TEST_LIB_FILE) $(DDE_DLL_FILE) $(REG_DLL_FILE) $(TEST_DLL_FILE)

# TCL_EXE is the name of a tclsh executable that is available *BEFORE* running
# make for the first time. Certain build targets (make genstubs) need it to be
# available on the PATH. This executable should *NOT* be required just to do a
# normal build although it can be required to run make dist.
TCL_EXE			= tclsh

${COMPILE_DEBUG_FLAGS}

TCLTEST_OBJS = \
	tclTest.$(OBJEXT) \
	tclTestObj.$(OBJEXT) \
	tclTestProcBodyObj.$(OBJEXT) \
	tclThreadTest.$(OBJEXT) \
	tclWinTest.$(OBJEXT)


GENERIC_OBJS = \
	regcomp.$(OBJEXT) \
	regexec.$(OBJEXT) \
	regfree.$(OBJEXT) \
	regerror.$(OBJEXT) \
	tclAlloc.$(OBJEXT) \

doc:

$(TCLSH): $(TCL_LIB_FILE) $(TCLSH_OBJS) tclsh.$(RES)
	$(CC) $(CFLAGS) $(TCLSH_OBJS) $(TCL_LIB_FILE) $(LIBS) \
        tclsh.$(RES) $(CC_EXENAME) $(LDFLAGS_CONSOLE)

$(TCLTEST): $(TCL_LIB_FILE) $(TCL_STUB_LIB_FILE) $(TCLTEST_OBJS) testMain.$(OBJEXT) $(CAT32) tclsh.$(RES)
	$(CC) $(CFLAGS) $(TCLTEST_OBJS) testMain.$(OBJEXT) $(TCL_LIB_FILE) $(TCL_STUB_LIB_FILE) $(LIBS) \
        tclsh.$(RES) $(CC_EXENAME) $(LDFLAGS_CONSOLE)

cat32.$(OBJEXT): cat.c
	$(CC) -c $(CC_SWITCHES) @DEPARG@ $(CC_OBJNAME)

$(CAT32): cat32.$(OBJEXT)
	$(CC) $(CFLAGS) cat32.$(OBJEXT) $(CC_EXENAME) $(LIBS) $(LDFLAGS_CONSOLE)

	@$(RM) ${REG_DLL_FILE}
	@MAKE_DLL@ ${REG_OBJS} $(TCL_STUB_LIB_FILE) $(SHLIB_LD_LIBS)

${REG_LIB_FILE}: ${REG_OBJS} tclStubLib.$(OBJEXT)
	@$(RM) ${REG_LIB_FILE}
	@MAKE_LIB@ ${REG_OBJS} tclStubLib.$(OBJEXT)
	@POST_MAKE_LIB@

${TEST_DLL_FILE}: ${TCLTEST_OBJS} ${TCL_STUB_LIB_FILE}
	@$(RM) ${TEST_DLL_FILE}
	@MAKE_DLL@ ${TCLTEST_OBJS} $(TCL_STUB_LIB_FILE) $(SHLIB_LD_LIBS)

${TEST_LIB_FILE}: ${TCLTEST_OBJS} tclStubLib.$(OBJEXT)
	@$(RM) ${TEST_LIB_FILE}
	@MAKE_LIB@ ${TCLTEST_OBJS} tclStubLib.$(OBJEXT)
	@POST_MAKE_LIB@

# use pre-built zlib1.dll
${ZLIB_DLL_FILE}: $(ZLIB_DIR)/win32/${ZLIB_DLL_FILE}
	@$(COPY) $(ZLIB_DIR)/win32/${ZLIB_DLL_FILE} ${ZLIB_DLL_FILE}

# use pre-built unicows.dll
${UNICOWS_DLL_FILE}: $(COMPAT_DIR)/mslu/${UNICOWS_DLL_FILE}

tclTestObj.${OBJEXT}: tclTestObj.c
	$(CC) -c $(CC_SWITCHES) @DEPARG@ $(CC_OBJNAME)

tclWinTest.${OBJEXT}: tclWinTest.c
	$(CC) -c $(CC_SWITCHES) @DEPARG@ $(CC_OBJNAME)

tclWinReg.${OBJEXT}: tclWinReg.c
	$(CC) -c $(CC_SWITCHES) @DEPARG@ $(CC_OBJNAME)

tclWinDde.${OBJEXT}: tclWinDde.c
	$(CC) -c $(CC_SWITCHES) @DEPARG@ $(CC_OBJNAME)

tclAppInit.${OBJEXT} : tclAppInit.c
	$(CC) -c $(CC_SWITCHES) @DEPARG@ $(CC_OBJNAME)

# For building zlib, only used in some build configurations

Zadler32.$(OBJEXT): $(ZLIB_DIR)/adler32.c
	$(CC) -c $(CC_SWITCHES) -I$(ZLIB_DIR) @DEPARG@ $(CC_OBJNAME)

	$(CC) -c $(CC_SWITCHES) -I$(ZLIB_DIR) @DEPARG@ $(CC_OBJNAME)
Zzutil.$(OBJEXT):    $(ZLIB_DIR)/zutil.c
	$(CC) -c $(CC_SWITCHES) -I$(ZLIB_DIR) @DEPARG@ $(CC_OBJNAME)

tclZlib.${OBJEXT} : tclZlib.c
	$(CC) -c ${ZLIB_INC} $(CC_SWITCHES) -DBUILD_tcl @DEPARG@ $(CC_OBJNAME)









# TIP #59, embedding of configuration information into the binary library.
#
# Part of Tcl's configuration information are the paths where it was installed
# and where it will look for its libraries (which can be different). We derive
# this information from the variables which can be overridden by the user. As
# every path can be configured separately we do not remember one general
# prefix/exec_prefix but all the different paths individually.