close $f
    set x
} "\r\n12"
test io-3.4 {WriteChars: loop over stage buffer} -body {
    # stage buffer maps to more than can be queued at once.

    set f [open $path(test1) w]
    fconfigure $f -encoding jis0208 -buffersize 16 -encodingprofile tcl8
    puts -nonewline $f "\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"
    set x [list [contents $path(test1)]]
    close $f
    lappend x [contents $path(test1)]
} -cleanup {
    catch {close $f}
} -result [list "!)!)!)!)!)!)!)!)" "!)!)!)!)!)!)!)!)!)!)!)!)!)!)!)"]
test io-3.5 {WriteChars: saved != 0} -body {
    # Bytes produced by UtfToExternal from end of last channel buffer
    # had to be moved to beginning of next channel buffer to preserve
    # requested buffersize.

    set f [open $path(test1) w]
    fconfigure $f -encoding jis0208 -buffersize 17 -encodingprofile tcl8
    puts -nonewline $f "\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"
    set x [list [contents $path(test1)]]
    close $f
    lappend x [contents $path(test1)]
} -cleanup {
    catch {close $f}
} -result [list "!)!)!)!)!)!)!)!)!" "!)!)!)!)!)!)!)!)!)!)!)!)!)!)!)"]

    # When translating UTF-8 to external, the produced bytes went past end
    # of the channel buffer.  This is done purpose -- we then truncate the
    # bytes at the end of the partial character to preserve the requested
    # blocksize on flush.  The truncated bytes are moved to the beginning
    # of the next channel buffer.

    set f [open $path(test1) w]
    fconfigure $f -encoding jis0208 -buffersize 17 -encodingprofile tcl8
    puts -nonewline $f "\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"
    set x [list [contents $path(test1)]]
    close $f
    lappend x [contents $path(test1)]
} -cleanup {
    catch {close $f}
} -result [list "!)!)!)!)!)!)!)!)!" "!)!)!)!)!)!)!)!)!)!)!)!)!)!)!)"]

    set f [open $fn w+]
    fconfigure $f -encoding binary
    # In UTF-8, a byte 0xCx starts a multibyte sequence and must be followed
    # by a byte > 0x7F. This is violated to get an invalid sequence.
    puts -nonewline $f A\xC0\x40
    flush $f
    seek $f 0
    fconfigure $f -encoding utf-8 -encodingprofile tcl8 -buffering none
} -body {
    set d [read $f]
    binary scan $d H* hd
    set hd
} -cleanup {
    close $f
    removeFile io-75.1
} -result 41c040

test io-75.2 {unrepresentable character write passes and is replaced by ? (-encodingprofile tcl8)} -setup {
    set fn [makeFile {} io-75.2]
    set f [open $fn w+]
    fconfigure $f -encoding iso8859-1 -encodingprofile tcl8
} -body {
    puts -nonewline $f A\u2022
    flush $f
    seek $f 0
    read $f
} -cleanup {
    close $f
    removeFile io-75.2
} -result A?

# Incomplete sequence test.
# This error may IMHO only be detected with the close.
# But the read already returns the incomplete sequence.
test io-75.3 {incomplete multibyte encoding read is ignored (-encodingprofile tcl8)} -setup {
    set fn [makeFile {} io-75.3]
    set f [open $fn w+]
    fconfigure $f -encoding binary
    puts -nonewline $f "A\xC0"
    flush $f
    seek $f 0
    fconfigure $f -encoding utf-8 -buffering none -encodingprofile tcl8
} -body {
    set d [read $f]
    close $f
    binary scan $d H* hd
    set hd
} -cleanup {
    removeFile io-75.3
} -result 41c0

# As utf-8 has a special treatment in multi-byte decoding, also test another
# one.
test io-75.4 {shiftjis encoding error read results in raw bytes (-encodingprofile tcl8)} -setup {
    set fn [makeFile {} io-75.4]
    set f [open $fn w+]
    fconfigure $f -encoding binary
    # In shiftjis, \x81 starts a two-byte sequence.
    # But 2nd byte \xFF is not allowed
    puts -nonewline $f A\x81\xFFA
    flush $f
    seek $f 0
    fconfigure $f -encoding shiftjis -buffering none -eofchar "" -translation lf -encodingprofile tcl8
} -body {
    set d [read $f]
    binary scan $d H* hd
    set hd
} -cleanup {
    close $f
    removeFile io-75.4
} -result 4181ff41

test io-75.5 {invalid utf-8 encoding read is ignored (-encodingprofile tcl8)} -setup {
    set fn [makeFile {} io-75.5]
    set f [open $fn w+]
    fconfigure $f -encoding binary
    puts -nonewline $f A\x81
    flush $f
    seek $f 0
    fconfigure $f -encoding utf-8 -buffering none -eofchar "" -translation lf -encodingprofile tcl8
} -body {
    set d [read $f]
    close $f
    binary scan $d H* hd
    set hd
} -cleanup {
    removeFile io-75.5
} -result 4181

test io-75.6 {invalid utf-8 encoding read is not ignored (-encodingprofile strict)} -setup {
    set fn [makeFile {} io-75.6]
    set f [open $fn w+]
    fconfigure $f -encoding binary
    # \x81 is invalid in utf-8
    puts -nonewline $f A\x81
    flush $f
    seek $f 0
    fconfigure $f -encoding utf-8 -buffering none -eofchar "" -translation lf -encodingprofile strict
} -body {
    set d [read $f]
    binary scan $d H* hd
    lappend hd [catch {read $f} msg]
    close $f
    lappend hd $msg
} -cleanup {
    removeFile io-75.6
} -match glob -result {41 1 {error reading "*": illegal byte sequence}}

test io-75.7 {invalid utf-8 encoding eof handling (-encodingprofile strict)} -setup {
    set fn [makeFile {} io-75.7]
    set f [open $fn w+]
    fconfigure $f -encoding binary
    # \xA1 is invalid in utf-8. -eofchar is not detected, because it comes later.
    puts -nonewline $f A\xA1\x1A
    flush $f
    seek $f 0
    fconfigure $f -encoding utf-8 -buffering none -eofchar \x1A -translation lf -encodingprofile strict
} -body {
    set d [read $f]
    binary scan $d H* hd
    lappend hd [eof $f]
    lappend hd [catch {read $f} msg]
    lappend hd $msg
    fconfigure $f -encoding iso8859-1
    lappend hd [read $f];# We changed encoding, so now we can read the \xA1
    close $f
    set hd
} -cleanup {
    removeFile io-75.7
} -match glob -result {41 0 1 {error reading "*": illegal byte sequence} ¡}

test io-75.8 {invalid utf-8 encoding eof handling (-encodingprofile strict)} -setup {
    set fn [makeFile {} io-75.8]
    set f [open $fn w+]
    fconfigure $f -encoding binary
    # \x81 is invalid in utf-8, but since \x1A comes first, -eofchar takes precedence.
    puts -nonewline $f A\x1A\x81
    flush $f
    seek $f 0
    fconfigure $f -encoding utf-8 -buffering none -eofchar \x1A -translation lf -encodingprofile strict
} -body {
    set d [read $f]
    binary scan $d H* hd
    lappend hd [eof $f]
    lappend hd [read $f]
    close $f
    set hd
} -cleanup {
    removeFile io-75.8
} -result {41 1 {}}

test io-75.9 {unrepresentable character write passes and is replaced by ?} -setup {
    set fn [makeFile {} io-75.9]
    set f [open $fn w+]
    fconfigure $f -encoding iso8859-1 -encodingprofile strict
} -body {
    catch {puts -nonewline $f "A\u2022"} msg
    flush $f
    seek $f 0
    list [read $f] $msg
} -cleanup {
    close $f

    set f [open $fn w+]
    fconfigure $f -encoding binary
    # In shiftjis, \x81 starts a two-byte sequence.
    # But 2nd byte \xFF is not allowed
    puts -nonewline $f A\x81\xFFA
    flush $f
    seek $f 0
    fconfigure $f -encoding shiftjis -buffering none -eofchar "" -translation lf -encodingprofile strict
} -body {
    set d [read $f]
    binary scan $d H* hd
    lappend hd [catch {set d [read $f]} msg]
    lappend hd $msg
} -cleanup {
    close $f

    set d [read $f]
    close $f
    binary scan $d H* hd
    set hd
} -cleanup {
    removeFile io-75.12
} -result 4181
test io-75.13 {invalid utf-8 encoding read is not ignored (-encodingprofile strict)} -setup {
    set fn [makeFile {} io-75.13]
    set f [open $fn w+]
    fconfigure $f -encoding binary
    # \x81 is invalid in utf-8
    puts -nonewline $f "A\x81"
    flush $f
    seek $f 0
    fconfigure $f -encoding utf-8 -buffering none -eofchar "" -translation lf -encodingprofile strict
} -body {
    set d [read $f]
    binary scan $d H* hd
    lappend hd [catch {read $f} msg]
    close $f
    lappend hd $msg
} -cleanup {