#
# This file is a Makefile for Tcl.  If it has the name "Makefile.in" then it
# is a template for a Makefile; to generate the actual Makefile, run
# "./configure", which is a configuration script generated by the "autoconf"
# program (constructs like "@foo@" will get replaced in the actual Makefile.

#
# RCS: @(#) $Id: Makefile.in,v 1.71.2.20 2007/04/08 15:00:53 dgp Exp $

VERSION = @TCL_VERSION@

#--------------------------------------------------------------------------
# Things you can change to personalize the Makefile for your own site (you can
# make these changes in either Makefile.in or Makefile, but changes to
# Makefile will get lost if you re-run the configuration script).

#--------------------------------------------------------------------------

# Default top-level directories in which to install architecture-specific
# files (exec_prefix) and machine-independent files such as scripts (prefix).
# The values specified here may be overridden at configure-time with the
# --exec-prefix and --prefix options to the "configure" script.


prefix			= @prefix@
exec_prefix		= @exec_prefix@
bindir			= @bindir@
libdir			= @libdir@
includedir		= @includedir@
mandir			= @mandir@

# The following definition can be set to non-null for special systems like AFS
# with replication. It allows the pathnames used for installation to be
# different than those used for actually reference files at run-time.
# INSTALL_ROOT is prepended to $prefix and $exec_prefix when installing files.

INSTALL_ROOT	=

# Directory from which applications will reference the library of Tcl scripts
# (note: you can set the TCL_LIBRARY environment variable at run-time to
# override this value):
TCL_LIBRARY	= $(prefix)/lib/tcl$(VERSION)

# Path to use at runtime to refer to LIB_INSTALL_DIR:
LIB_RUNTIME_DIR		= $(libdir)

# Directory in which to install the program tclsh:
BIN_INSTALL_DIR		= $(INSTALL_ROOT)$(bindir)

# Top-level directory in which to install manual entries:
MAN_INSTALL_DIR		= $(INSTALL_ROOT)$(mandir)

# Directory in which to install manual entry for tclsh:
MAN1_INSTALL_DIR = $(MAN_INSTALL_DIR)/man1

# Directory in which to install manual entries for Tcl's C library procedures:

MAN3_INSTALL_DIR = $(MAN_INSTALL_DIR)/man3

# Directory in which to install manual entries for the built-in Tcl commands:

MANN_INSTALL_DIR = $(MAN_INSTALL_DIR)/mann

# Libraries built with optimization switches have this additional extension
TCL_DBGX = @TCL_DBGX@

# warning flags
CFLAGS_WARNING = @CFLAGS_WARNING@

# The default switches for optimization or debugging
CFLAGS_DEBUG    = @CFLAGS_DEBUG@
CFLAGS_OPTIMIZE	= @CFLAGS_OPTIMIZE@

# To change the compiler switches, for example to change from optimization to
# debugging symbols, change the following line:
#CFLAGS = 		$(CFLAGS_DEBUG)
#CFLAGS = 		$(CFLAGS_OPTIMIZE)
#CFLAGS = 		$(CFLAGS_DEBUG) $(CFLAGS_OPTIMIZE)
CFLAGS = 		@CFLAGS@ @CFLAGS_DEFAULT@

# To enable compilation debugging reverse the comment characters on one of the
# following lines.
COMPILE_DEBUG_FLAGS =
#COMPILE_DEBUG_FLAGS = -DTCL_COMPILE_DEBUG
#COMPILE_DEBUG_FLAGS = -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS

# Special compiler flags to use when building man2tcl on Windows.
MAN2TCLFLAGS =		@MAN2TCLFLAGS@

CYGPATH			= @CYGPATH@

GENERIC_DIR_NATIVE	= $(shell $(CYGPATH) '$(GENERIC_DIR)' | sed 's!\\!/!g')
TOMMATH_DIR_NATIVE	= $(shell $(CYGPATH) '$(TOMMATH_DIR)' | sed 's!\\!/!g')
WIN_DIR_NATIVE		= $(shell $(CYGPATH) '$(WIN_DIR)' | sed 's!\\!/!g')
ROOT_DIR_NATIVE		= $(shell $(CYGPATH) '$(ROOT_DIR)' | sed 's!\\!/!g')

# Fully qualify library path so that `make test`
# does not depend on the current directory.
LIBRARY_DIR1		= $(shell cd '$(ROOT_DIR_NATIVE)/library' ; pwd)
LIBRARY_DIR             = $(shell $(CYGPATH) '$(LIBRARY_DIR1)' | sed 's!\\!/!g')
DLLSUFFIX		= @DLLSUFFIX@
LIBSUFFIX		= @LIBSUFFIX@
EXESUFFIX		= @EXESUFFIX@

VER			= @TCL_MAJOR_VERSION@@TCL_MINOR_VERSION@
DOTVER			= @TCL_MAJOR_VERSION@.@TCL_MINOR_VERSION@
DDEVER			= @TCL_DDE_MAJOR_VERSION@@TCL_DDE_MINOR_VERSION@

REG_LIB_FILE		= tclreg$(REGVER)${LIBSUFFIX}
PIPE_DLL_FILE		= tclpip$(VER)${DLLSUFFIX}

SHARED_LIBRARIES 	= $(TCL_DLL_FILE) $(TCL_STUB_LIB_FILE) \
			  $(DDE_DLL_FILE) $(REG_DLL_FILE) $(PIPE_DLL_FILE)
STATIC_LIBRARIES	= $(TCL_LIB_FILE) $(REG_LIB_FILE) $(DDE_LIB_FILE)

# TCL_EXE is the name of a tclsh executable that is available *BEFORE* running
# make for the first time. Certain build targets (make genstubs) need it to be
# available on the PATH. This executable should *NOT* be required just to do a
# normal build although it can be required to run make dist.

TCL_EXE			= tclsh

TCLSH			= tclsh$(VER)${EXESUFFIX}
TCLTEST			= tcltest${EXEEXT}
CAT32			= cat32$(EXEEXT)
MAN2TCL			= man2tcl$(EXEEXT)

@SET_MAKE@

# Setting the VPATH variable to a list of paths will cause the Makefile to
# look into these paths when resolving .c to .obj dependencies.


VPATH = $(GENERIC_DIR):$(TOMMATH_DIR):$(WIN_DIR):$(COMPAT_DIR)

AR		= @AR@
RANLIB		= @RANLIB@
CC		= @CC@
RC		= @RC@

	tclIOSock.$(OBJEXT) \
	tclIOUtil.$(OBJEXT) \
	tclLink.$(OBJEXT) \
	tclLiteral.$(OBJEXT) \
	tclListObj.$(OBJEXT) \
	tclLoad.$(OBJEXT) \
	tclMain.$(OBJEXT) \
	tclMathOp.$(OBJEXT) \
	tclNamesp.$(OBJEXT) \
	tclNotify.$(OBJEXT) \
	tclObj.$(OBJEXT) \
	tclPanic.$(OBJEXT) \
	tclParse.$(OBJEXT) \

	tclPathObj.$(OBJEXT) \
	tclPipe.$(OBJEXT) \
	tclPkg.$(OBJEXT) \
	tclPkgConfig.$(OBJEXT) \
	tclPosixStr.$(OBJEXT) \
	tclPreserve.$(OBJEXT) \
	tclProc.$(OBJEXT) \

	tclWinFile.$(OBJEXT) \
	tclWinInit.$(OBJEXT) \
	tclWinLoad.$(OBJEXT) \
	tclWinNotify.$(OBJEXT) \
	tclWinPipe.$(OBJEXT) \
	tclWinSock.$(OBJEXT) \
	tclWinThrd.$(OBJEXT) \
	tclWinTime.$(OBJEXT)

COMPAT_OBJS = \
	strtoll.$(OBJEXT) strtoull.$(OBJEXT)

PIPE_OBJS = stub16.$(OBJEXT)

DDE_OBJS = tclWinDde.$(OBJEXT)

cat32.$(OBJEXT): cat.c
	$(CC) -c $(CC_SWITCHES) @DEPARG@ $(CC_OBJNAME)

$(CAT32): cat32.$(OBJEXT)
	$(CC) $(CFLAGS) cat32.$(OBJEXT) $(CC_EXENAME) $(LIBS) $(LDFLAGS_CONSOLE)

# The following targets are configured by autoconf to generate either a shared
# library or static library

${TCL_STUB_LIB_FILE}: ${STUB_OBJS}
	@$(RM) ${TCL_STUB_LIB_FILE}
	@MAKE_LIB@ ${STUB_OBJS}
	@POST_MAKE_LIB@

${TCL_DLL_FILE}: ${TCL_OBJS} tcl.$(RES)

	@$(RM) ${REG_DLL_FILE}
	@MAKE_DLL@ ${REG_OBJS} $(TCL_STUB_LIB_FILE) $(SHLIB_LD_LIBS)

${REG_LIB_FILE}: ${REG_OBJS} ${TCL_LIB_FILE}
	@$(RM) ${REG_LIB_FILE}
	@MAKE_LIB@ ${REG_OBJS} ${TCL_LIB_FILE}

# PIPE_DLL_FILE is actually an executable, don't build it like a DLL.


${PIPE_DLL_FILE}: ${PIPE_OBJS}
	@$(RM) ${PIPE_DLL_FILE}
	@MAKE_EXE@ $(CFLAGS) ${PIPE_OBJS} $(LIBS) $(LDFLAGS_CONSOLE)

# Add the object extension to the implicit rules. By default .obj is not
# automatically added.

.SUFFIXES: .${OBJEXT}
.SUFFIXES: .$(RES)
.SUFFIXES: .rc

# Special case object targets

	$(CC) -c $(CC_SWITCHES) -DUSE_TCL_STUBS @DEPARG@ $(CC_OBJNAME)

tclWinDde.${OBJEXT} : tclWinDde.c
	$(CC) -c $(CC_SWITCHES) -DUSE_TCL_STUBS @DEPARG@ $(CC_OBJNAME)

# TIP #59, embedding of configuration information into the binary library.
#
# Part of Tcl's configuration information are the paths where it was installed
# and where it will look for its libraries (which can be different). We derive
# this information from the variables which can be overridden by the user. As

# every path can be configured separately we do not remember one general
# prefix/exec_prefix but all the different paths individually.

tclPkgConfig.${OBJEXT}: tclPkgConfig.c
	$(CC)	-c $(CC_SWITCHES)			\
		-DCFG_INSTALL_LIBDIR=\"$(LIB_INSTALL_DIR)\" \
		-DCFG_INSTALL_BINDIR=\"$(BIN_INSTALL_DIR)\" \
		-DCFG_INSTALL_SCRDIR=\"$(SCRIPT_INSTALL_DIR)\" \
		-DCFG_INSTALL_INCDIR=\"$(INCLUDE_INSTALL_DIR)\" \
		-DCFG_INSTALL_DOCDIR=\"$(MAN_INSTALL_DIR)\" \
		\
		-DCFG_RUNTIME_LIBDIR=\"$(libdir)\" \
		-DCFG_RUNTIME_BINDIR=\"$(bindir)\" \
		-DCFG_RUNTIME_SCRDIR=\"$(TCL_LIBRARY)\" \
		-DCFG_RUNTIME_INCDIR=\"$(includedir)\" \
		-DCFG_RUNTIME_DOCDIR=\"$(mandir)\" \
		-DBUILD_tcl \
		@DEPARG@ $(CC_OBJNAME)

# The following objects are part of the stub library and should not be built
# as DLL objects but none of the symbols should be exported

tclStubLib.${OBJEXT}: tclStubLib.c
	$(CC) -c $(CC_SWITCHES) -DSTATIC_BUILD @DEPARG@ $(CC_OBJNAME)


# Implicit rule for all object files that will end up in the Tcl library

.c.${OBJEXT}:
	$(CC) -c $(CC_SWITCHES) -DBUILD_tcl @DEPARG@ $(CC_OBJNAME)

.rc.$(RES):
	$(RC) @RC_OUT@ $@ @RC_TYPE@ @RC_DEFINES@ @RC_INCLUDE@ "$(GENERIC_DIR_NATIVE)" @RC_INCLUDE@ "$(WIN_DIR_NATIVE)" @DEPARG@

# The following target generates the file generic/tclDate.c from the yacc
# grammar found in generic/tclGetDate.y. This is only run by hand as yacc is

# not available in all environments. The name of the .c file is different than
# the name of the .y file so that make doesn't try to automatically regenerate
# the .c file.

gendate:
	bison --output-file=$(GENERIC_DIR)/tclDate.c \
	--name-prefix=TclDate \
	--no-lines \
	$(GENERIC_DIR)/tclGetDate.y

# The following target generates the file generic/tclTomMath.h. It needs to be
# run (and the results checked) after updating to a new release of libtommath.


gentommath_h:
	$(TCL_EXE) "$(ROOT_DIR_NATIVE)\tools\fix_tommath_h.tcl" \
		"$(TOMMATH_DIR_NATIVE)\tommath.h" \
		> "$(GENERIC_DIR_NATIVE)\tclTomMath.h"

install: all install-binaries install-libraries install-doc

	    do \
	    if [ ! -d $$i ] ; then \
		echo "Making directory $$i"; \
		$(MKDIR) $$i; \
		else true; \
		fi; \
	    done;
	@for i in http1.0 opt0.4 encoding ../tcl8 ../tcl8/8.2 ../tcl8/8.3 ../tcl8/8.4  ../tcl8/8.4/platform ../tcl8/8.5; \
	    do \
	    if [ ! -d $(SCRIPT_INSTALL_DIR)/$$i ] ; then \
		echo "Making directory $(SCRIPT_INSTALL_DIR)/$$i"; \
		$(MKDIR) $(SCRIPT_INSTALL_DIR)/$$i; \
		else true; \
		fi; \
	    done;

	    do \
	    $(COPY) "$$j" "$(SCRIPT_INSTALL_DIR)/opt0.4"; \
	    done;
	@echo "Installing package msgcat 1.4.2 as a Tcl Module";
	@$(COPY) $(ROOT_DIR)/library/msgcat/msgcat.tcl $(SCRIPT_INSTALL_DIR)/../tcl8/8.5/msgcat-1.4.2.tm;
	@echo "Installing package tcltest 2.3a1 as a Tcl Module";
	@$(COPY) $(ROOT_DIR)/library/tcltest/tcltest.tcl $(SCRIPT_INSTALL_DIR)/../tcl8/8.5/tcltest-2.3a1.tm;
	@echo "Installing package platform 1.0.2 as a Tcl Module";
	@$(COPY) $(ROOT_DIR)/library/platform/platform.tcl $(SCRIPT_INSTALL_DIR)/../tcl8/8.4/platform-1.0.2.tm;
	@echo "Installing package platform::shell 1.1.3 as a Tcl Module";
	@$(COPY) $(ROOT_DIR)/library/platform/shell.tcl $(SCRIPT_INSTALL_DIR)/../tcl8/8.4/platform/shell-1.1.3.tm;
	@echo "Installing encodings";
	@for i in $(ROOT_DIR)/library/encoding/*.enc ; do \
		$(COPY) "$$i" "$(SCRIPT_INSTALL_DIR)/encoding"; \
	done;

install-tzdata:
	@echo "Installing time zone data"

	@for i in "$(GENERIC_DIR)/tclInt.h" "$(GENERIC_DIR)/tclIntDecls.h" \
		"$(GENERIC_DIR)/tclIntPlatDecls.h" "$(GENERIC_DIR)/tclPort.h" \
		"$(WIN_DIR)/tclWinPort.h" ; \
	    do \
	    $(COPY) "$$i" "$(PRIVATE_INCLUDE_INSTALL_DIR)"; \
	    done;

# Specifying TESTFLAGS on the command line is the standard way to pass args to
# tcltest, i.e.:
#	% make test TESTFLAGS="-verbose bps -file fileName.test"

test: binaries $(TCLTEST)
	TCL_LIBRARY="$(LIBRARY_DIR)"; export TCL_LIBRARY; \
	./$(TCLTEST) "$(ROOT_DIR_NATIVE)/tests/all.tcl" $(TESTFLAGS) \
	-load "set ::ddelib [file normalize ${DDE_DLL_FILE}]; \
	set ::reglib [file normalize ${REG_DLL_FILE}]" | ./$(CAT32)

# Useful target to launch a built tcltest with the proper path,...
runtest: binaries $(TCLTEST)
	@TCL_LIBRARY="$(LIBRARY_DIR)"; export TCL_LIBRARY; \
	./$(TCLTEST) $(TESTFLAGS) -load "set ::ddelib [file normalize ${DDE_DLL_FILE}]; \
	set ::reglib [file normalize ${REG_DLL_FILE}]" $(SCRIPT)

# This target can be used to run tclsh from the build directory via
# `make shell SCRIPT=foo.tcl`
shell: binaries
	@TCL_LIBRARY="$(LIBRARY_DIR)"; export TCL_LIBRARY; \
	./$(TCLSH) $(SCRIPT)

# This target can be used to run tclsh inside either gdb or insight
gdb: binaries
	@echo "set env TCL_LIBRARY=$(LIBRARY_DIR)" > gdb.run