#
# This file is a Makefile for Tcl.  If it has the name "Makefile.in" then it
# is a template for a Makefile; to generate the actual Makefile, run
# "./configure", which is a configuration script generated by the "autoconf"
# program (constructs like "@foo@" will get replaced in the actual Makefile.


VERSION = @TCL_VERSION@

#--------------------------------------------------------------------------
# Things you can change to personalize the Makefile for your own site (you can
# make these changes in either Makefile.in or Makefile, but changes to
# Makefile will get lost if you re-run the configuration script).

#--------------------------------------------------------------------------

# Default top-level directories in which to install architecture-specific
# files (exec_prefix) and machine-independent files such as scripts (prefix).
# The values specified here may be overridden at configure-time with the
# --exec-prefix and --prefix options to the "configure" script.


prefix			= @prefix@
exec_prefix		= @exec_prefix@
bindir			= @bindir@
libdir			= @libdir@
includedir		= @includedir@
mandir			= @mandir@

# The following definition can be set to non-null for special systems like AFS
# with replication. It allows the pathnames used for installation to be
# different than those used for actually reference files at run-time.
# INSTALL_ROOT is prepended to $prefix and $exec_prefix when installing files.

INSTALL_ROOT	=

# Directory from which applications will reference the library of Tcl scripts
# (note: you can set the TCL_LIBRARY environment variable at run-time to
# override this value):
TCL_LIBRARY	= $(prefix)/lib/tcl$(VERSION)

# Path to use at runtime to refer to LIB_INSTALL_DIR:
LIB_RUNTIME_DIR		= $(libdir)

# Directory in which to install the program tclsh:
BIN_INSTALL_DIR		= $(INSTALL_ROOT)$(bindir)

# Top-level directory in which to install manual entries:
MAN_INSTALL_DIR		= $(INSTALL_ROOT)$(mandir)

# Directory in which to install manual entry for tclsh:
MAN1_INSTALL_DIR = $(MAN_INSTALL_DIR)/man1

# Directory in which to install manual entries for Tcl's C library procedures:

MAN3_INSTALL_DIR = $(MAN_INSTALL_DIR)/man3

# Directory in which to install manual entries for the built-in Tcl commands:

MANN_INSTALL_DIR = $(MAN_INSTALL_DIR)/mann

# Libraries built with optimization switches have this additional extension
TCL_DBGX = @TCL_DBGX@

# warning flags
CFLAGS_WARNING = @CFLAGS_WARNING@

# The default switches for optimization or debugging
CFLAGS_DEBUG    = @CFLAGS_DEBUG@
CFLAGS_OPTIMIZE	= @CFLAGS_OPTIMIZE@

# To change the compiler switches, for example to change from optimization to
# debugging symbols, change the following line:
#CFLAGS = 		$(CFLAGS_DEBUG)
#CFLAGS = 		$(CFLAGS_OPTIMIZE)
#CFLAGS = 		$(CFLAGS_DEBUG) $(CFLAGS_OPTIMIZE)
CFLAGS = 		@CFLAGS@ @CFLAGS_DEFAULT@

# To enable compilation debugging reverse the comment characters on one of the
# following lines.
COMPILE_DEBUG_FLAGS =
#COMPILE_DEBUG_FLAGS = -DTCL_COMPILE_DEBUG
#COMPILE_DEBUG_FLAGS = -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS

# Special compiler flags to use when building man2tcl on Windows.
MAN2TCLFLAGS =		@MAN2TCLFLAGS@

SRC_DIR			= @srcdir@
ROOT_DIR		= @srcdir@/..
GENERIC_DIR		= @srcdir@/../generic
WIN_DIR			= @srcdir@
COMPAT_DIR		= @srcdir@/../compat

# Converts a POSIX path to a Windows native path.
CYGPATH			= @CYGPATH@

GENERIC_DIR_NATIVE	= $(shell $(CYGPATH) '$(GENERIC_DIR)' | sed 's!\\!/!g')
WIN_DIR_NATIVE		= $(shell $(CYGPATH) '$(WIN_DIR)' | sed 's!\\!/!g')
ROOT_DIR_NATIVE		= $(shell $(CYGPATH) '$(ROOT_DIR)' | sed 's!\\!/!g')

# Fully qualify library path so that `make test`
# does not depend on the current directory.
LIBRARY_DIR1		= $(shell cd '$(ROOT_DIR_NATIVE)/library' ; pwd)
LIBRARY_DIR             = $(shell $(CYGPATH) '$(LIBRARY_DIR1)' | sed 's!\\!/!g')
DLLSUFFIX		= @DLLSUFFIX@
LIBSUFFIX		= @LIBSUFFIX@
EXESUFFIX		= @EXESUFFIX@

VER			= @TCL_MAJOR_VERSION@@TCL_MINOR_VERSION@
DOTVER			= @TCL_MAJOR_VERSION@.@TCL_MINOR_VERSION@
DDEVER			= @TCL_DDE_MAJOR_VERSION@@TCL_DDE_MINOR_VERSION@
DDEDOTVER		= @TCL_DDE_MAJOR_VERSION@.@TCL_DDE_MINOR_VERSION@
REGVER			= @TCL_REG_MAJOR_VERSION@@TCL_REG_MINOR_VERSION@
REGDOTVER		= @TCL_REG_MAJOR_VERSION@.@TCL_REG_MINOR_VERSION@

TCL_STUB_LIB_FILE	= @TCL_STUB_LIB_FILE@
TCL_DLL_FILE		= @TCL_DLL_FILE@
TCL_LIB_FILE		= @TCL_LIB_FILE@
DDE_DLL_FILE		= tcldde$(DDEVER)${DLLSUFFIX}
DDE_LIB_FILE		= tcldde$(DDEVER)${LIBSUFFIX}
REG_DLL_FILE		= tclreg$(REGVER)${DLLSUFFIX}
REG_LIB_FILE		= tclreg$(REGVER)${LIBSUFFIX}
PIPE_DLL_FILE		= tclpip$(VER)${DLLSUFFIX}

SHARED_LIBRARIES 	= $(TCL_DLL_FILE) $(TCL_STUB_LIB_FILE) \
			  $(DDE_DLL_FILE) $(REG_DLL_FILE) $(PIPE_DLL_FILE)
STATIC_LIBRARIES	= $(TCL_LIB_FILE) $(REG_LIB_FILE) $(DDE_LIB_FILE)

# TCL_EXE is the name of a tclsh executable that is available *BEFORE* running
# make for the first time. Certain build targets (make genstubs) need it to be
# available on the PATH. This executable should *NOT* be required just to do a
# normal build although it can be required to run make dist.

TCL_EXE			= tclsh

TCLSH			= tclsh$(VER)${EXESUFFIX}
TCLTEST			= tcltest${EXEEXT}
CAT32			= cat32$(EXEEXT)
MAN2TCL			= man2tcl$(EXEEXT)

@SET_MAKE@

# Setting the VPATH variable to a list of paths will cause the Makefile to
# look into these paths when resolving .c to .obj dependencies.


VPATH = $(GENERIC_DIR):$(WIN_DIR):$(COMPAT_DIR)

AR		= @AR@
RANLIB		= @RANLIB@
CC		= @CC@
RC		= @RC@

EXEEXT		= @EXEEXT@
OBJEXT		= @OBJEXT@
STLIB_LD	= @STLIB_LD@
SHLIB_LD	= @SHLIB_LD@
SHLIB_LD_LIBS	= @SHLIB_LD_LIBS@ $(LIBS)
SHLIB_CFLAGS	= @SHLIB_CFLAGS@
SHLIB_SUFFIX	= @SHLIB_SUFFIX@






LIBS		= @LIBS@

RMDIR		= rm -rf
MKDIR		= mkdir -p
SHELL		= @SHELL@
RM		= rm -f
COPY		= cp

	tclWinInit.$(OBJEXT) \
	tclWinLoad.$(OBJEXT) \
	tclWinMtherr.$(OBJEXT) \
	tclWinNotify.$(OBJEXT) \
	tclWinPipe.$(OBJEXT) \
	tclWinSock.$(OBJEXT) \
	tclWinThrd.$(OBJEXT) \
	tclWinTime.$(OBJEXT)

COMPAT_OBJS = \
	strftime.$(OBJEXT) strtoll.$(OBJEXT) strtoull.$(OBJEXT)

PIPE_OBJS = stub16.$(OBJEXT)

DDE_OBJS = tclWinDde.$(OBJEXT)

cat32.$(OBJEXT): cat.c
	$(CC) -c $(CC_SWITCHES) @DEPARG@ $(CC_OBJNAME)

$(CAT32): cat32.$(OBJEXT)
	$(CC) $(CFLAGS) cat32.$(OBJEXT) $(CC_EXENAME) $(LIBS) $(LDFLAGS_CONSOLE)

# The following targets are configured by autoconf to generate either a shared
# library or static library

${TCL_STUB_LIB_FILE}: ${STUB_OBJS}
	@$(RM) ${TCL_STUB_LIB_FILE}
	@MAKE_LIB@ ${STUB_OBJS}
	@POST_MAKE_LIB@

${TCL_DLL_FILE}: ${TCL_OBJS} tcl.$(RES)

	@$(RM) ${REG_DLL_FILE}
	@MAKE_DLL@ ${REG_OBJS} $(TCL_STUB_LIB_FILE) $(SHLIB_LD_LIBS)

${REG_LIB_FILE}: ${REG_OBJS} ${TCL_LIB_FILE}
	@$(RM) ${REG_LIB_FILE}
	@MAKE_LIB@ ${REG_OBJS} ${TCL_LIB_FILE}

# PIPE_DLL_FILE is actually an executable, don't build it like a DLL.


${PIPE_DLL_FILE}: ${PIPE_OBJS}
	@$(RM) ${PIPE_DLL_FILE}
	@MAKE_EXE@ $(CFLAGS) ${PIPE_OBJS} $(LIBS) $(LDFLAGS_CONSOLE)

# Add the object extension to the implicit rules. By default .obj is not
# automatically added.

.SUFFIXES: .${OBJEXT}
.SUFFIXES: .$(RES)
.SUFFIXES: .rc

# Special case object targets

# Implicit rule for all object files that will end up in the Tcl library

.c.${OBJEXT}:
	$(CC) -c $(CC_SWITCHES) -DBUILD_tcl @DEPARG@ $(CC_OBJNAME)

.rc.$(RES):
	$(RC) @RC_OUT@ $@ @RC_TYPE@ @RC_DEFINES@ @RC_INCLUDE@ "$(GENERIC_DIR_NATIVE)" @RC_INCLUDE@ "$(WIN_DIR_NATIVE)" @DEPARG@

# The following target generates the file generic/tclDate.c from the yacc
# grammar found in generic/tclGetDate.y. This is only run by hand as yacc is
# not available in all environments. The name of the .c file is different than
# the name of the .y file so that make doesn't try to automatically regenerate
# the .c file.

gendate:
	bison --output-file=$(GENERIC_DIR)/tclDate.c \
	--name-prefix=TclDate \
	--no-lines \
	$(GENERIC_DIR)/tclGetDate.y

# The following target generates the file generic/tclTomMath.h. It needs to be
# run (and the results checked) after updating to a new release of libtommath.

gentommath_h:
	$(TCL_EXE) "$(ROOT_DIR_NATIVE)\tools\fix_tommath_h.tcl" \
		"$(TOMMATH_DIR_NATIVE)\tommath.h" \
		> "$(GENERIC_DIR_NATIVE)\tclTomMath.h"

install: all install-binaries install-libraries install-doc

install-binaries: binaries
	@for i in "$(LIB_INSTALL_DIR)" "$(BIN_INSTALL_DIR)" ; \
	    do \
	    if [ ! -d $$i ] ; then \

# Optional target to install private headers
install-private-headers: libraries
	@for i in $(PRIVATE_INCLUDE_INSTALL_DIR); \
	    do \
	    if [ ! -d $$i ] ; then \
		echo "Making directory $$i"; \
		$(MKDIR) $$i; \

		else true; \
		fi; \
	    done;
	@echo "Installing private header files";
	@for i in "$(GENERIC_DIR)/tclInt.h" "$(GENERIC_DIR)/tclIntDecls.h" \
		"$(GENERIC_DIR)/tclIntPlatDecls.h" "$(GENERIC_DIR)/tclPort.h" \
		"$(WIN_DIR)/tclWinPort.h" ; \
	    do \
	    $(COPY) "$$i" "$(PRIVATE_INCLUDE_INSTALL_DIR)"; \
	    done;

# Specifying TESTFLAGS on the command line is the standard way to pass args to
# tcltest, i.e.:
#	% make test TESTFLAGS="-verbose bps -file fileName.test"

test: binaries $(TCLTEST)
	TCL_LIBRARY="$(LIBRARY_DIR)"; export TCL_LIBRARY; \
	./$(TCLTEST) "$(ROOT_DIR_NATIVE)/tests/all.tcl" $(TESTFLAGS) \
	-load "set ::ddelib [file normalize ${DDE_DLL_FILE}]; \
	set ::reglib [file normalize ${REG_DLL_FILE}]" | ./$(CAT32)

# Useful target to launch a built tcltest with the proper path,...
runtest: binaries $(TCLTEST)
	@TCL_LIBRARY="$(LIBRARY_DIR)"; export TCL_LIBRARY; \
	./$(TCLTEST) $(TESTFLAGS) -load "set ::ddelib [file normalize ${DDE_DLL_FILE}]; \
	set ::reglib [file normalize ${REG_DLL_FILE}]" $(SCRIPT)

# This target can be used to run tclsh from the build directory via
# `make shell SCRIPT=foo.tcl`
shell: binaries
	@TCL_LIBRARY="$(LIBRARY_DIR)"; export TCL_LIBRARY; \
	./$(TCLSH) $(SCRIPT)

# This target can be used to run tclsh inside either gdb or insight
gdb: binaries
	@echo "set env TCL_LIBRARY=$(LIBRARY_DIR)" > gdb.run
	gdb ./$(TCLSH) --command=gdb.run
	rm gdb.run

depend:

Makefile: $(SRC_DIR)/Makefile.in
	./config.status

cleanhelp:
	$(RM) *.hlp *.cnt *.GID *.rtf man2tcl.exe

clean: cleanhelp
	$(RM) *.lib *.a *.exp *.dll *.$(RES) *.${OBJEXT} *~ \#* TAGS a.out
	$(RM) $(TCLSH) $(TCLTEST) $(CAT32)
	$(RM) *.pch *.ilk *.pdb

distclean: clean
	$(RM) Makefile config.status config.cache config.log tclConfig.sh \
		tcl.hpj config.status.lineno

#
# Regenerate the stubs files.
#

$(GENERIC_DIR)/tclStubInit.c: $(GENERIC_DIR)/tcl.decls \
		$(GENERIC_DIR)/tclInt.decls
	@echo "Warning: tclStubInit.c may be out of date."
	@echo "Developers may want to run \"make genstubs\" to regenerate."
	@echo "This warning can be safely ignored, do not report as a bug!"

genstubs:
	$(TCL_EXE) "$(ROOT_DIR_NATIVE)\tools\genStubs.tcl" \
	    "$(GENERIC_DIR_NATIVE)" \
	    "$(GENERIC_DIR_NATIVE)\tcl.decls" \
	    "$(GENERIC_DIR_NATIVE)\tclInt.decls"