#
# This file is a Makefile for Tcl.  If it has the name "Makefile.in" then it
# is a template for a Makefile; to generate the actual Makefile, run
# "./configure", which is a configuration script generated by the "autoconf"
# program (constructs like "@foo@" will get replaced in the actual Makefile.
#
# RCS: @(#) $Id: Makefile.in,v 1.173.2.1 2010/06/07 17:37:07 rmax Exp $

VERSION = @TCL_VERSION@

#--------------------------------------------------------------------------
# Things you can change to personalize the Makefile for your own site (you can
# make these changes in either Makefile.in or Makefile, but changes to
# Makefile will get lost if you re-run the configuration script).

CFLAGS_OPTIMIZE	= @CFLAGS_OPTIMIZE@

# To change the compiler switches, for example to change from optimization to
# debugging symbols, change the following line:
#CFLAGS = 		$(CFLAGS_DEBUG)
#CFLAGS = 		$(CFLAGS_OPTIMIZE)
#CFLAGS = 		$(CFLAGS_DEBUG) $(CFLAGS_OPTIMIZE)
CFLAGS = 		@CFLAGS@ @CFLAGS_DEFAULT@

# To enable compilation debugging reverse the comment characters on one of the
# following lines.
COMPILE_DEBUG_FLAGS =
#COMPILE_DEBUG_FLAGS = -DTCL_COMPILE_DEBUG
#COMPILE_DEBUG_FLAGS = -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS

TCL_LIB_FILE		= @TCL_LIB_FILE@
DDE_DLL_FILE		= tcldde$(DDEVER)${DLLSUFFIX}
DDE_LIB_FILE		= @LIBPREFIX@tcldde$(DDEVER)${LIBSUFFIX}
REG_DLL_FILE		= tclreg$(REGVER)${DLLSUFFIX}
REG_LIB_FILE		= @LIBPREFIX@tclreg$(REGVER)${LIBSUFFIX}
TEST_DLL_FILE		= tcltest$(VER)${DLLSUFFIX}
TEST_LIB_FILE		= @LIBPREFIX@tcltest$(VER)${LIBSUFFIX}
PIPE_DLL_FILE		= tclpip$(VER)${DLLSUFFIX}
ZLIB_DLL_FILE		= zlib1.dll

SHARED_LIBRARIES 	= $(TCL_DLL_FILE) $(PIPE_DLL_FILE) @ZLIB_DLL_FILE@
STATIC_LIBRARIES	= $(TCL_LIB_FILE) $(REG_LIB_FILE) $(DDE_LIB_FILE)

# TCL_EXE is the name of a tclsh executable that is available *BEFORE* running
# make for the first time. Certain build targets (make genstubs) need it to be
# available on the PATH. This executable should *NOT* be required just to do a
# normal build although it can be required to run make dist.
TCL_EXE			= tclsh

	tclWinLoad.$(OBJEXT) \
	tclWinNotify.$(OBJEXT) \
	tclWinPipe.$(OBJEXT) \
	tclWinSock.$(OBJEXT) \
	tclWinThrd.$(OBJEXT) \
	tclWinTime.$(OBJEXT)

PIPE_OBJS = stub16.$(OBJEXT)

DDE_OBJS = tclWinDde.$(OBJEXT)

REG_OBJS = tclWinReg.$(OBJEXT)

STUB_OBJS = \
	tclStubLib.$(OBJEXT) \
	tclTomMathStubLib.$(OBJEXT) \

libraries:

doc:

$(TCLSH): $(TCLSH_OBJS) @LIBRARIES@ $(TCL_STUB_LIB_FILE) tclsh.$(RES)
	$(CC) $(CFLAGS) $(TCLSH_OBJS) $(TCL_LIB_FILE) $(TCL_STUB_LIB_FILE) $(LIBS) \
        tclsh.$(RES) $(CC_EXENAME) $(LDFLAGS_CONSOLE)


$(TCLTEST): testMain.$(OBJEXT) ${TEST_DLL_FILE} @LIBRARIES@ $(TCL_STUB_LIB_FILE) $(CAT32) tclsh.$(RES)
	$(CC) $(CFLAGS) testMain.$(OBJEXT) ${TEST_LIB_FILE} $(TCL_LIB_FILE) $(TCL_STUB_LIB_FILE) $(LIBS) \
        tclsh.$(RES) $(CC_EXENAME) $(LDFLAGS_CONSOLE)


cat32.$(OBJEXT): cat.c
	$(CC) -c $(CC_SWITCHES) @DEPARG@ $(CC_OBJNAME)

$(CAT32): cat32.$(OBJEXT)
	$(CC) $(CFLAGS) cat32.$(OBJEXT) $(CC_EXENAME) $(LIBS) $(LDFLAGS_CONSOLE)

# The following targets are configured by autoconf to generate either a shared
# library or static library

${TCL_STUB_LIB_FILE}: ${STUB_OBJS}
	@$(RM) ${TCL_STUB_LIB_FILE}
	@MAKE_LIB@ ${STUB_OBJS}
	@POST_MAKE_LIB@

${TCL_DLL_FILE}: ${TCL_OBJS} tcl.$(RES) @ZLIB_DLL_FILE@
	@$(RM) ${TCL_DLL_FILE} $(TCL_LIB_FILE)
	@MAKE_DLL@ ${TCL_OBJS} tcl.$(RES) $(SHLIB_LD_LIBS)


${TCL_LIB_FILE}: ${TCL_OBJS}
	@$(RM) ${TCL_LIB_FILE}
	@MAKE_LIB@ ${TCL_OBJS}
	@POST_MAKE_LIB@

# assume GNU make

	@$(RM) ${TEST_DLL_FILE} ${TEST_LIB_FILE}
	@MAKE_DLL@ ${TCLTEST_OBJS} $(TCL_STUB_LIB_FILE) $(SHLIB_LD_LIBS)

# use pre-built zlib1.dll
${ZLIB_DLL_FILE}: $(ZLIB_DIR)/win32/${ZLIB_DLL_FILE}
	@$(COPY) $(ZLIB_DIR)/win32/${ZLIB_DLL_FILE} ${ZLIB_DLL_FILE}

# PIPE_DLL_FILE is actually an executable, don't build it like a DLL.

${PIPE_DLL_FILE}: ${PIPE_OBJS}
	@$(RM) ${PIPE_DLL_FILE}
	@MAKE_EXE@ $(CFLAGS) ${PIPE_OBJS} $(LIBS) $(LDFLAGS_CONSOLE)

# Add the object extension to the implicit rules. By default .obj is not
# automatically added.

.SUFFIXES: .${OBJEXT}
.SUFFIXES: .$(RES)
.SUFFIXES: .rc

# Special case object targets

tclWinInit.${OBJEXT}: tclWinInit.c
	$(CC) -c $(CC_SWITCHES) -DBUILD_tcl $(EXTFLAGS) @DEPARG@ $(CC_OBJNAME)

tclWinPipe.${OBJEXT}: tclWinPipe.c
	$(CC) -c $(CC_SWITCHES) -DBUILD_tcl -DTCL_PIPE_DLL=\"$(PIPE_DLL_FILE)\" \
	    $(EXTFLAGS) @DEPARG@ $(CC_OBJNAME)

testMain.${OBJEXT}: tclAppInit.c
	$(CC) -c $(CC_SWITCHES) -DTCL_TEST @DEPARG@ $(CC_OBJNAME)

# TIP #59, embedding of configuration information into the binary library.
#
# Part of Tcl's configuration information are the paths where it was installed

	$(CC) -c $(CC_SWITCHES) -DSTATIC_BUILD @DEPARG@ $(CC_OBJNAME)

tclOOStubLib.${OBJEXT}: tclOOStubLib.c
	$(CC) -c $(CC_SWITCHES) -DSTATIC_BUILD @DEPARG@ $(CC_OBJNAME)

# Implicit rule for all object files that will end up in the Tcl library

.c.${OBJEXT}:
	$(CC) -c $(CC_SWITCHES) -DBUILD_tcl @DEPARG@ $(CC_OBJNAME)

.rc.$(RES):
	$(RC) @RC_OUT@ $@ @RC_TYPE@ @RC_DEFINES@ @RC_INCLUDE@ "$(GENERIC_DIR_NATIVE)" @RC_INCLUDE@ "$(WIN_DIR_NATIVE)" @DEPARG@

# The following target generates the file generic/tclDate.c from the yacc
# grammar found in generic/tclGetDate.y. This is only run by hand as yacc is

	    do \
	    if [ ! -d $(LIB_INSTALL_DIR)/$$i ] ; then \
		echo "Making directory $(LIB_INSTALL_DIR)/$$i"; \
		$(MKDIR) $(LIB_INSTALL_DIR)/$$i; \
		else true; \
		fi; \
	    done;
	@for i in $(TCL_DLL_FILE) $(ZLIB_DLL_FILE) $(TCLSH) $(PIPE_DLL_FILE); \
	    do \
	    if [ -f $$i ]; then \
		echo "Installing $$i to $(BIN_INSTALL_DIR)/"; \
		$(COPY) $$i "$(BIN_INSTALL_DIR)"; \
	    fi; \
	    done
	@for i in tclConfig.sh tclooConfig.sh $(TCL_LIB_FILE) $(TCL_STUB_LIB_FILE); \

	    do \
	    $(COPY) "$$j" "$(SCRIPT_INSTALL_DIR)/opt0.4"; \
	    done;
	@echo "Installing package msgcat 1.4.3 as a Tcl Module";
	@$(COPY) $(ROOT_DIR)/library/msgcat/msgcat.tcl $(SCRIPT_INSTALL_DIR)/../tcl8/8.5/msgcat-1.4.3.tm;
	@echo "Installing package tcltest 2.3.2 as a Tcl Module";
	@$(COPY) $(ROOT_DIR)/library/tcltest/tcltest.tcl $(SCRIPT_INSTALL_DIR)/../tcl8/8.5/tcltest-2.3.2.tm;
	@echo "Installing package platform 1.0.8 as a Tcl Module";
	@$(COPY) $(ROOT_DIR)/library/platform/platform.tcl $(SCRIPT_INSTALL_DIR)/../tcl8/8.4/platform-1.0.8.tm;
	@echo "Installing package platform::shell 1.1.4 as a Tcl Module";
	@$(COPY) $(ROOT_DIR)/library/platform/shell.tcl $(SCRIPT_INSTALL_DIR)/../tcl8/8.4/platform/shell-1.1.4.tm;
	@echo "Installing encodings";
	@for i in $(ROOT_DIR)/library/encoding/*.enc ; do \
		$(COPY) "$$i" "$(SCRIPT_INSTALL_DIR)/encoding"; \
	done;