*
 * Side effects:
 *	Stores base*5**n in result.
 *
 *----------------------------------------------------------------------
 */

inline static void
static inline void
MulPow5(
    mp_int *base, 		/* Number to multiply. */
    unsigned n,			/* Power of 5 to multiply by. */
    mp_int *result)		/* Place to store the result. */
{
    mp_int *p = base;
    int n13 = n / 13;

 *
 * Side effects:
 *	Shifts the number in place; *wPtr is replaced by the shifted number.
 *
 *----------------------------------------------------------------------
 */

inline static int
static inline int
NormalizeRightward(
    Tcl_WideUInt *wPtr)		/* INOUT: Number to shift. */
{
    int rv = 0;
    Tcl_WideUInt w = *wPtr;

    if (!(w & (Tcl_WideUInt) 0xffffffff)) {

 *	Stores the significand in '*significand' and the exponent in '*expon'
 *	so that dv == significand * 2.0**expon, and significand is odd.  Also
 *	stores the position of the leftmost 1-bit in 'significand' in 'bits'.
 *
 *----------------------------------------------------------------------
 */

inline static void
static inline void
DoubleToExpAndSig(
    double dv,			/* Number to convert. */
    Tcl_WideUInt *significand,	/* OUTPUT: Significand of the number. */
    int *expon,			/* OUTPUT: Exponent to multiply the number
				 * by. */
    int *bits)			/* OUTPUT: Number of significant bits. */
{

 * Side effects:
 *	The 'double' in *d is replaced with its absolute value. The signum is
 *	stored in 'sign': 1 for negative, 0 for nonnegative.
 *
 *----------------------------------------------------------------------
 */

inline static void
static inline void
TakeAbsoluteValue(
    Double *d,			/* Number to replace with absolute value. */
    int *sign)			/* Place to put the signum. */
{
    if (d->w.word0 & SIGN_BIT) {
	*sign = 1;
	d->w.word0 &= ~SIGN_BIT;

 * Side effects:
 *	Stores 9999 in *decpt, and sets '*endPtr' to designate the terminating
 *	NUL byte of the string if 'endPtr' is not NULL.
 *
 *----------------------------------------------------------------------
 */

inline static char *
static inline char *
FormatInfAndNaN(
    Double *d,			/* Exceptional number to format. */
    int *decpt,			/* Decimal point to set to a bogus value. */
    char **endPtr)		/* Pointer to the end of the formatted data */
{
    char *retval;

 * Side effects:
 *	Stores 1 in '*decpt' and puts a pointer to the NUL byte terminating
 *	the string in '*endPtr' if 'endPtr' is not NULL.
 *
 *----------------------------------------------------------------------
 */

inline static char *
static inline char *
FormatZero(
    int *decpt,			/* Location of the decimal point. */
    char **endPtr)		/* Pointer to the end of the formatted data */
{
    char *retval = ckalloc(2);

    strcpy(retval, "0");

 * Results:
 *	Return an approximation to floor(log10(bw*2**be)) that is either exact
 *	or 1 too high.
 *
 *----------------------------------------------------------------------
 */

inline static int
static inline int
ApproximateLog10(
    Tcl_WideUInt bw,		/* Integer significand of the number. */
    int be,			/* Power of two to scale bw. */
    int bbits)			/* Number of bits of precision in bw. */
{
    int i;			/* Log base 2 of the number. */
    int k;			/* Floor(Log base 10 of the number) */

 *
 * Results:
 *	Returns the improved approximation to log10(d).
 *
 *----------------------------------------------------------------------
 */

inline static int
static inline int
BetterLog10(
    double d,			/* Original number to format. */
    int k,			/* Characteristic(Log base 10) of the
				 * number. */
    int *k_check)		/* Flag == 1 if k is inexact. */
{
    /*

 *	exactly represents the value of the x/10**k. This value will lie in
 *	the range [1 .. 10), and allows for computing successive digits by
 *	multiplying sig%10 by 10.
 *
 *----------------------------------------------------------------------
 */

inline static void
static inline void
ComputeScale(
    int be,			/* Exponent part of number: d = bw * 2**be. */
    int k,			/* Characteristic of log10(number). */
    int *b2,			/* OUTPUT: Power of 2 in the numerator. */
    int *b5,			/* OUTPUT: Power of 5 in the numerator. */
    int *s2,			/* OUTPUT: Power of 2 in the denominator. */
    int *s5)			/* OUTPUT: Power of 5 in the denominator. */

 *	digits to convert if k has been guessed correctly, and '*iLim1Ptr' to
 *	the limiting number of digits to convert if k has been guessed to be
 *	one too high.
 *
 *----------------------------------------------------------------------
 */

inline static void
static inline void
SetPrecisionLimits(
    int convType,		/* Type of conversion: TCL_DD_SHORTEST,
				 * TCL_DD_STEELE0, TCL_DD_E_FMT,
				 * TCL_DD_F_FMT. */
    int k,			/* Floor(log10(number to convert)) */
    int *ndigitsPtr,		/* IN/OUT: Number of digits requested (will be
				 *         adjusted if needed). */

 * Side effects:
 *	In the case that the string consists solely of '999999', sets it to
 *	"1" and moves the decimal point (*kPtr) one place to the right.
 *
 *----------------------------------------------------------------------
 */

inline static char *
static inline char *
BumpUp(
    char *s,		    	/* Cursor pointing one past the end of the
				 * string. */
    char *retval,		/* Start of the string of digits. */
    int *kPtr)			/* Position of the decimal point. */
{
    while (*--s == '9') {

 * Results:
 *	Returns the precision that has been lost in the prescaling as a count
 *	of units in the least significant place.
 *
 *----------------------------------------------------------------------
 */

inline static int
static inline int
AdjustRange(
    double *dPtr,		/* INOUT: Number to adjust. */
    int k)			/* IN: floor(log10(d)) */
{
    int ieps;			/* Number of roundoff errors that have
				 * accumulated. */
    double d = *dPtr;		/* Number to adjust. */

 *
 * Side effects:
 *	Stores the position of the decimal point at '*kPtr'.
 *
 *----------------------------------------------------------------------
 */

inline static char *
static inline char *
ShorteningQuickFormat(
    double d,			/* Number to convert. */
    int k,			/* floor(log10(d)) */
    int ilim,			/* Number of significant digits to return. */
    double eps,			/* Estimated roundoff error. */
    char *retval,		/* Buffer to receive the digit string. */
    int *kPtr)			/* Pointer to stash the position of the

 *
 * Side effects:
 *	Stores the position of the decimal point in '*kPtr'.
 *
 *----------------------------------------------------------------------
 */

inline static char *
static inline char *
StrictQuickFormat(
    double d,			/* Number to convert. */
    int k,			/* floor(log10(d)) */
    int ilim,			/* Number of significant digits to return. */
    double eps,			/* Estimated roundoff error. */
    char *retval,		/* Start of the digit string. */
    int *kPtr)			/* Pointer to stash the position of the

 * Results:
 *	Returns the converted string, or NULL if the bignum method must be
 *	used.
 *
 *----------------------------------------------------------------------
 */

inline static char *
static inline char *
QuickConversion(
    double e,			/* Number to format. */
    int k,			/* floor(log10(d)), approximately. */
    int k_check,		/* 0 if k is exact, 1 if it may be too high */
    int flags,			/* Flags passed to dtoa:
				 *    TCL_DD_SHORTEN_FLAG */
    int len,			/* Length of the return value. */

 *	Adjust the factors 'b2', 'm2', and 's2' to cast out common powers of 2
 *	from numerator and denominator in preparation for the 'bignum' method
 *	of floating point conversion.
 *
 *----------------------------------------------------------------------
 */

inline static void
static inline void
CastOutPowersOf2(
    int *b2,			/* Power of 2 to multiply the significand. */
    int *m2,			/* Power of 2 to multiply 1/2 ulp. */
    int *s2)			/* Power of 2 to multiply the common
				 * denominator. */
{
    int i;

 * Side effects:
 *	Stores the location of the decimal point in '*decpt' and the location
 *	of the terminal null byte in '*endPtr'.
 *
 *----------------------------------------------------------------------
 */

inline static char *
static inline char *
ShorteningInt64Conversion(
    Double *dPtr,		/* Original number to convert. */
    int convType,		/* Type of conversion (shortest, Steele,
				 * E format, F format). */
    Tcl_WideUInt bw,		/* Integer significand. */
    int b2, int b5,		/* Scale factor for the significand in the
				 * numerator. */

 * Side effects:
 *	Stores the location of the decimal point in '*decpt' and the location
 *	of the terminal null byte in '*endPtr'.
 *
 *----------------------------------------------------------------------
 */

inline static char *
static inline char *
StrictInt64Conversion(
    Double *dPtr,		/* Original number to convert. */
    int convType,		/* Type of conversion (shortest, Steele,
				 * E format, F format). */
    Tcl_WideUInt bw,		/* Integer significand. */
    int b2, int b5,		/* Scale factor for the significand in the
				 * numerator. */

 * Results:
 *	Returns 1 iff the fraction is more than 1/2, or if the fraction is
 *	exactly 1/2 and the digit is odd.
 *
 *----------------------------------------------------------------------
 */

inline static int
static inline int
ShouldBankerRoundUpPowD(
    mp_int *b,			/* Numerator of the fraction. */
    int sd,			/* Denominator is 2**(sd*DIGIT_BIT). */
    int isodd)			/* 1 if the digit is odd, 0 if even. */
{
    int i;
    static const mp_digit topbit = 1 << (DIGIT_BIT - 1);

 * Results:
 *	Returns 1 if the rounding will be performed - which increases the
 *	digit by one - and 0 otherwise.
 *
 *----------------------------------------------------------------------
 */

inline static int
static inline int
ShouldBankerRoundUpToNextPowD(
    mp_int *b,			/* Numerator of the fraction. */
    mp_int *m,			/* Numerator of the rounding tolerance. */
    int sd,			/* Common denominator is 2**(sd*DIGIT_BIT). */
    int convType,		/* Conversion type: STEELE defeats
				 * round-to-even (not sure why one wants to do
				 * this; I copied it from Gay). FIXME */

 * Side effects:
 *	Stores the location of the decimal point in '*decpt' and the location
 *	of the terminal null byte in '*endPtr'.
 *
 *----------------------------------------------------------------------
 */

inline static char *
static inline char *
ShorteningBignumConversionPowD(
    Double *dPtr,		/* Original number to convert. */
    int convType,		/* Type of conversion (shortest, Steele,
				 * E format, F format). */
    Tcl_WideUInt bw,		/* Integer significand. */
    int b2, int b5,		/* Scale factor for the significand in the
				 * numerator. */

 * Side effects:
 *	Stores the location of the decimal point in '*decpt' and the location
 *	of the terminal null byte in '*endPtr'.
 *
 *----------------------------------------------------------------------
 */

inline static char *
static inline char *
StrictBignumConversionPowD(
    Double *dPtr,		/* Original number to convert. */
    int convType,		/* Type of conversion (shortest, Steele,
				 * E format, F format). */
    Tcl_WideUInt bw,		/* Integer significand. */
    int b2, int b5,		/* Scale factor for the significand in the
				 * numerator. */

 *
 * Results:
 *	Returns 1 if the number needs to be rounded up, 0 otherwise.
 *
 *----------------------------------------------------------------------
 */

inline static int
static inline int
ShouldBankerRoundUp(
    mp_int *twor,		/* 2x the remainder from thd division that
				 * produced the last digit. */
    mp_int *S,			/* Denominator. */
    int isodd)			/* Flag == 1 if the last digit is odd. */
{
    int r = mp_cmp_mag(twor, S);

 *
 * Results:
 *	Returns 1 if the number should be rounded up, 0 otherwise.
 *
 *----------------------------------------------------------------------
 */

inline static int
static inline int
ShouldBankerRoundUpToNext(
    mp_int *b,			/* Remainder from the division that produced
				 * the last digit. */
    mp_int *m,			/* Numerator of the rounding tolerance. */
    mp_int *S,			/* Denominator. */
    int convType,		/* Conversion type: STEELE0 defeats
				 * round-to-even. (Not sure why one would want

 * Side effects:
 *	Stores the position of the decimal point in *decpt.  Stores a pointer
 *	to the end of the number in *endPtr.
 *
 *----------------------------------------------------------------------
 */

inline static char *
static inline char *
ShorteningBignumConversion(
    Double *dPtr,		/* Original number being converted. */
    int convType,		/* Conversion type. */
    Tcl_WideUInt bw,		/* Integer significand and exponent. */
    int b2,			/* Scale factor for the significand. */
    int m2plus, int m2minus,	/* Scale factors for 1/2 ulp in numerator. */
    int s2, int s5,		/* Scale factors for denominator. */

 * Side effects:
 *	Stores the position of the decimal point in *decpt.  Stores a pointer
 *	to the end of the number in *endPtr.
 *
 *----------------------------------------------------------------------
 */

inline static char *
static inline char *
StrictBignumConversion(
    Double *dPtr,		/* Original number being converted. */
    int convType,		/* Conversion type. */
    Tcl_WideUInt bw,		/* Integer significand and exponent. */
    int b2,			/* Scale factor for the significand. */
    int s2, int s5,		/* Scale factors for denominator. */
    int k,			/* Guessed position of the decimal point. */