ADDED ABOUT Index: ABOUT ================================================================== --- /dev/null +++ ABOUT @@ -0,0 +1,6 @@ +web2py is an open source full-stack framework for agile development +of secure database-driven web-based applications, written and programmable in +Python. + +Created by Massimo Di Pierro + ADDED LICENSE Index: LICENSE ================================================================== --- /dev/null +++ LICENSE @@ -0,0 +1,137 @@ +## Web2py License + +Web2py is Licensed under the LGPL license version 3 +(http://www.gnu.org/licenses/lgpl.html) + +Copyrighted (c) by Massimo Di Pierro (2007-2011) + +### On Commercial Redistribution + +In accordance with LGPL you may: +- redistribute web2py with your apps (including official web2py binary versions) +- release your applications which use official web2py libraries under any license you wish +But you must: +- make clear in the documentation that your application uses web2py +- release any modification of the web2py libraries under the LGPLv3 license + +THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL +NECESSARY SERVICING, REPAIR OR CORRECTION. + +IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT +HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, +BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL +DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES +OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER +PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. + +(Earlier versions of web2py, 1.0.*-1.90.*, were released under the GPL2 license plus a +commercial exception which, for practical purposes, was very similar to the current LPGLv3) + +### Licenses for third party contributed software + +web2py contains third party software under the gluon/contrib/ folder. +Each file/module in contrib is distributed with web2py under its original license. +Here we list some of them. + +#### gluon.contrib.simplejson LICENSE + +Copyright (c) 2006 Bob Ippolito - Permission is hereby granted, free of charge, +to any person obtaining a copy of this software and associated documentation +files (the "Software"), to deal in the Software without restriction, including +without limitation the rights to use, copy, modify, merge, publish, distribute, +sublicense, and/or sell copies of the Software, and to permit persons to whom +the Software is furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. + +#### gluon.contrib.rss2.py (originally PyRSS2Gen) LICENSE + +This is copyright (c) by Dalke Scientific Software, LLC and released under the +BSD license. See the file LICENSE in the distribution or + for details. + +#### gluon.contrib.markdown (markdown2) LICENSE + +MIT License from from + +#### gluon.contrib.feedparser LICENSE + +Copyright (c) 2002-2005, Mark Pilgrim + +All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions +are met: + +* Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + +* Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS' +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. + +#### gluon.wsgiserver.py LICENSE (borrowed from cherrypy) + +Copyright (c) 2004, CherryPy Team (team@cherrypy.org) +All rights reserved. + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + * Neither the name of the CherryPy Team nor the names of its contributors + may be used to endorse or promote products derived from this software + without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE +FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +#### gluon.contrib.pam LICENSE + +Copyright (C) 2007-2009 Chris AtLee Licensed under the MIT license + +#### gluon.contrib.shell LICENSE + +Copyright (C) by Google inc. Apache 2.0 Lincense + +#### The javascript licenses are in the code itself + ADDED Makefile Index: Makefile ================================================================== --- /dev/null +++ Makefile @@ -0,0 +1,114 @@ +clean: + rm -f httpserver.log + rm -f parameters*.py + rm -f -r applications/*/compiled + find ./ -name '*~' -exec rm -f {} \; + find ./ -name '#*' -exec rm -f {} \; + find ./ -name 'Thumbs.db' -exec rm -f {} \; + find ./gluon/ -name '.*' -exec rm -f {} \; + find ./gluon/ -name '*class' -exec rm -f {} \; + find ./applications/admin/ -name '.*' -exec rm -f {} \; + find ./applications/examples/ -name '.*' -exec rm -f {} \; + find ./applications/welcome/ -name '.*' -exec rm -f {} \; + find ./ -name '*.pyc' -exec rm -f {} \; +all: + echo "The Makefile is used to build the distribution." + echo "In order to run web2py you do not need to make anything." + echo "just run web2py.py" +epydoc: + ### build epydoc + rm -f -r applications/examples/static/epydoc/ + epydoc --config epydoc.conf + cp applications/examples/static/title.png applications/examples/static/epydoc +tests: + cd gluon/tests; ./test.sh 1>tests.log 2>&1 +src: + echo 'Version 1.98.2 ('`date +%Y-%m-%d\ %H:%M:%S`')' > VERSION + ### rm -f all junk files + make clean + ### clean up baisc apps + rm -f routes.py + rm -f applications/*/sessions/* + rm -f applications/*/errors/* | echo 'too many files' + rm -f applications/*/cache/* + rm -f applications/admin/databases/* + rm -f applications/welcome/databases/* + rm -f applications/examples/databases/* + rm -f applications/admin/uploads/* + rm -f applications/welcome/uploads/* + rm -f applications/examples/uploads/* + ### make admin layout and appadmin the default + cp applications/admin/views/appadmin.html applications/welcome/views + cp applications/admin/views/appadmin.html applications/examples/views + cp applications/admin/controllers/appadmin.py applications/welcome/controllers + cp applications/admin/controllers/appadmin.py applications/examples/controllers + ### update the license + cp ABOUT applications/admin/ + cp ABOUT applications/examples/ + cp LICENSE applications/admin/ + cp LICENSE applications/examples/ + ### build web2py_src.zip + echo '' > NEWINSTALL + mv web2py_src.zip web2py_src_old.zip | echo 'no old' + cd ..; zip -r web2py/web2py_src.zip web2py/gluon/*.py web2py/gluon/contrib/* web2py/splashlogo.gif web2py/*.py web2py/ABOUT web2py/LICENSE web2py/README web2py/NEWINSTALL web2py/VERSION web2py/Makefile web2py/epydoc.css web2py/epydoc.conf web2py/app.example.yaml web2py/logging.example.conf web2py_exe.conf web2py/queue.example.yaml MANIFEST.in mkweb2pyenv startweb2py web2py/scripts/*.sh web2py/scripts/*.py web2py/applications/admin web2py/applications/examples/ web2py/applications/welcome web2py/applications/__init__.py web2py/site-packages/__init__.py web2py/gluon/tests/*.sh web2py/gluon/tests/*.py + +mdp: + make epydoc + make src + make app + make win +app: + echo 'did you uncomment import_all in gluon/main.py?' + python2.5 -c 'import compileall; compileall.compile_dir("gluon/")' + #python web2py.py -S welcome -R __exit__.py + find gluon -path '*.pyc' -exec cp {} ../web2py_osx/site-packages/{} \; + cd ../web2py_osx/site-packages/; zip -r ../site-packages.zip * + mv ../web2py_osx/site-packages.zip ../web2py_osx/web2py/web2py.app/Contents/Resources/lib/python2.5 + cp ABOUT ../web2py_osx/web2py/web2py.app/Contents/Resources + cp NEWINSTALL ../web2py_osx/web2py/web2py.app/Contents/Resources + cp LICENSE ../web2py_osx/web2py/web2py.app/Contents/Resources + cp VERSION ../web2py_osx/web2py/web2py.app/Contents/Resources + cp README ../web2py_osx/web2py/web2py.app/Contents/Resources + cp splashlogo.gif ../web2py_osx/web2py/web2py.app/Contents/Resources + cp options_std.py ../web2py_osx/web2py/web2py.app/Contents/Resources + cp routes.example.py ../web2py_osx/web2py/web2py.app/Contents/Resources + cp router.example.py ../web2py_osx/web2py/web2py.app/Contents/Resources + cp app.example.yaml ../web2py_osx/web2py/web2py.app/Contents/Resources + cp queue.example.yaml ../web2py_osx/web2py/web2py.app/Contents/Resources + cp -r applications/admin ../web2py_osx/web2py/web2py.app/Contents/Resources/applications + cp -r applications/welcome ../web2py_osx/web2py/web2py.app/Contents/Resources/applications + cp -r applications/examples ../web2py_osx/web2py/web2py.app/Contents/Resources/applications + cp applications/__init__.py ../web2py_osx/web2py/web2py.app/Contents/Resources/applications + cd ../web2py_osx; zip -r web2py_osx.zip web2py + mv ../web2py_osx/web2py_osx.zip . +win: + echo 'did you uncomment import_all in gluon/main.py?' + python2.5 -c 'import compileall; compileall.compile_dir("gluon/")' + find gluon -path '*.pyc' -exec cp {} ../web2py_win/library/{} \; + cd ../web2py_win/library/; zip -r ../library.zip * + mv ../web2py_win/library.zip ../web2py_win/web2py + cp ABOUT ../web2py_win/web2py/ + cp NEWINSTALL ../web2py_win/web2py/ + cp LICENSE ../web2py_win/web2py/ + cp VERSION ../web2py_win/web2py/ + cp README ../web2py_win/web2py/ + cp splashlogo.gif ../web2py_win/web2py/ + cp options_std.py ../web2py_win/web2py/ + cp routes.example.py ../web2py_win/web2py/ + cp router.example.py ../web2py_win/web2py/ + cp app.example.yaml ../web2py_win/web2py/ + cp queue.example.yaml ../web2py_win/web2py/ + cp -r applications/admin ../web2py_win/web2py/applications + cp -r applications/welcome ../web2py_win/web2py/applications + cp -r applications/examples ../web2py_win/web2py/applications + cp applications/__init__.py ../web2py_win/web2py/applications + cd ../web2py_win; zip -r web2py_win.zip web2py + mv ../web2py_win/web2py_win.zip . +run: + python2.5 web2py.py -a hello +push: + make src + echo '' > NEWINSTALL + hg push + bzr push bzr+ssh://mdipierro@bazaar.launchpad.net/~mdipierro/web2py/devel --use-existing-dir + ADDED README Index: README ================================================================== --- /dev/null +++ README @@ -0,0 +1,1144 @@ +## INSTALLATION INSTRUCTION - IMPORTANT + +To start web2py there is NO NEED to install it. Just unzip and do: + +> python web2py.py + +Thats is it!!! + +## web2py file structure + +start web2py with: + + python web2py.py + +`` + \project + README + LICENSE + TODO + Makefile ## make all and make app + web2py.py ## the startup script (*) + parameters.py ## created at startup + admin.tar ## the admin app (*) + examples.tar ## examples and documentation app (*) + welcome.tar ## the welcome app (entry point) (*) + \gluon ## the core libraries (*) + \deposit ## used for zip and install apps + setup_app.py ## used by py2app to make OSX executable + setup_exe.py ## used by py2app to make Winows executble + wsgihandler.py ## to use Gluon with mod_wsgi + \dist ## used by py2app, py2exe + \build ## used by py2app, py2exe + \tests ## under development stuff + \docs ## in progress documentation + \applications ## are the apps + \welcome ## application welcome, for example + \models + \views + \controllers + \sessions + \errors + \cache + \static + \uploads + \modules +`` + +## EWF v1.5 -> v1.6 +- load and save .py in ascii, avoids problem with LF+CR on windows +- added path.join in compileapp, fixed problem with Windows compileapp + +## EWF v1.6 -> v1.7 +- in paths replace '\' with '/' to fix problem with windows paths +- using limitby in database administration +- replaced mime/miltupart with multipart/form-data to fix a windows problem + +## EWF v1.7 -> Gluon v1.0 +- Name change +- Improved layout.html + +## Gluon v1.0 -> v1.1 +- bug in sqlhtml with JOINS queries + +## Gluon v1.1 -> v1.2 +- fixed some typos in examples +- IS_IN_SET now supports labels +- cleanup in sql.py does not cleanup, just checks valid field and table names + +## Gluon v1.3 +- added IS_IN_DB, IS_NOT_IN_DB and updated examples accordingly + +## Gluon v1.4 +- fixed problem with IS_INT_IN_RANGE and IS_FLOAT_IN_RANGE. Now an error in a validator is reported as a ticket. Good validators should not raise Exceptions. +- IS_IN_DB displays "label (id)" +- it can upload files without extension +- migration is now optional (define_table has migrate=False option) + +## Gluon v1.5 +-
-> in errors.html +- replace('//','////') in sub in template.py + +## Gluon v1.8 +- no more chdir (thread unsafe) +- no more sys.stdout (thread unsafe) +- response.body is StringIO() +- admin/default/site informs about upgrade +- response.locker (optional) + +## Gluon v1.9 +- allow "count(*)" in select +- db.execute() +- fixed problem with continue and return in template +- removed try: ... except in sql.py +- fixed '\t' + +## Gluon v1.10 +- fixed concurrency problems with SQLDB._instances and SQLDB._folders, now use lock +- now, by default, edit SQLFORMs retain uploaded files + +## Gluon v1.11 +- appadmin allows to keep or delete uploaded files + +## Gluon v1.12 +- in sql.py +- handles NULL values properly +- unicode support (data always stored in utf-8) +- 'date' -> datetime.date ,'time' -> datetime.time, 'datetime' -> datetime.datetime, 'boolean' -> True/False +- most types have default validators +- SQLField(...,required=True) option. +- SQLRows has __str__ that serializes in CSV and xml() that serializes in HTML +- SQLTable has import_from_csv_file(...) +- gluon.simplejson for AJAX +- in validators.py +- IS_IN_DB(db,..) - db can be an SQLSet or an SQLDB +- better error messages +- in admin +- new import/export in csv, update and delete interface. +- in appadmin +- edit form allows to keep stored encrypted password +- in main.py +- http://host not defaults to http://host/init/default/index +- New third party modules +- gluon.simplejson(.dumps, .loads) +- gluon.pyrtf(.dumps) +- gluon.rss2(.dumps) + +## Gluon v1.13 +- (this is one of the biggest revisions ever) +- Improved sql.py has support MySQL, cxOracle (experimental), extract, like and better testing +- SQLDB.tables and SQLTable.fields are now SQLCalableList objects +- Fixed bug with editing integer fields storing zero +- Admin interface now says "insert new [tablename]" and display insert, select or update properly in the title. +- Added a cache mechamism. Works for data, controllers, views and SQLRows. +- main.py now uses a request.folder absolute path when not os.name in ['nt','posix']. Seems to work on windowsce devices, except no file locking has consequences. +- Now you can put modules in applications/[anyapp]/modules and import them with +- import applications.[anyapp].modules.[module] as [module] +- Fixed problem with init +- New applications/examples/controller/global.py controller for docs. + +## Gluon v1.14 +- Fixed a bug fix in URLs + +## Gluon v1.15 +- New try:... except. in gluon/main.py for when sessions cannot be saved +- Now validator/formatter method allows IS_DATE('%d/%m/%Y') + +## web2py v1.16 +- yes we changed the name! Turns out Gluon was trademarked by somebody else. +- Although we are not infringing the trademark since this is a non-commercial +- product we could have run into some issues. So we have been professional +- and changed the name to web2py. +- Now SQLFORMs and FORM can have a formname and multiple forms are allowed +- per page. +- A new examples/default/index page. +- web2py.py instead of runme.py +- mysql sets utf8 encoding. +- input integer field values are automatically converted int(). + +## web2py v1.17 +- I posted v1.16 too soon. v1.17 was released after 1h to fix some bugs. + +## web2py v1.18 +- removed vulnerability in accept_languages and session_id +- Minor bug fixes. Typos and cleanup cache. Textarea now clears. +- Support for PyAMF. +- T returns a class, not a string +- new template parser (faster?) +- got rid of sintaxhighlighter in favor of server side CODE +- fix problem with cacheondisk locking +- fix 'None' instead of NULL in IS_NOT_IN_DB (I think) +- gluon.contrib.markdown +- notnull and unique in SQLField now supported (tested on sqlite mysql and postgresql) +- Storage now has __getstate__ and __setstate__ needed for pickling. +- session files are now locked to make it work better with asynchronous requests +- cxoracle should work, apart for limitby +- .../examples is now mapped to .../examples/default/index etc. +- .../init is now mapped to .../welcome if init is not present + +## web2py 1.19 +- minor typos + +## web2py 1.20 +- new IFRAME, LABEL, FIELDSET validators +- P(..cr2br=True) option +- FORM and SQLFORM have hidden=dict(...) option for REST +- testing framework. +- improved examples pages + +## web2py 1.21 +- replaced paste.httpserver with cherrypy.wsgi server +- temporary sessions are no longer saved +- widget has [stop] button and graph +- logging is done by main by appfactory +- fixed a bug in sql belongs + +## web2py 1.22-1.25 +- fixed minor bugs, added IS_NULL_OR + +## web2py 1.26 +- added shell.py (thanks Limodou!) +- added memcache support + +## web2py 1.27 +- IS_NULL_OR now works will all fields +- admin creates paths to static files +- wsgiserver options are passed to HttpServer +- faking limitby for oracle to make appadmin work +- all objects inherit from object +- fixed bug in app names with . +- fixed bug in created RestrictedError object on windows +- shell is now in gluon and accessible via web2py.py + +## web2py 1.28 +- fixed bug with belongs, faster sql.py +- included jquery.js +- minor aestetical fixes +- sortable.js is gone + +## web2py 1.29 +- Now selet mutliple works with get, so does is IS_LENGTH +- Added IS_LIST_OF +- fixed problem with admin from windows and localhost + +## web2py 1.30 +- added flv to contenttype +- added support for appengine + +## web2py 1.31-1.41 +- some bug fixes, mostly better appengine support +- mssql support +- firebird support +- widgets support +- connection pools + +## 1.42 +- fixed security issue by removing slash escape in mysql +- removed random everywhere +- use uuid for session and tickets +- use http_x_forward_for to figure out the client causing a ticket +- use longtext and longblob for mysql +- main now really catches all exceptions +- no more warnings on GAE + +## 1.43-1.48 +- html.py rewrite (better support for custom forms) (Bill Ferrett) +- new stickers in examples (thanks Mateusz) +- on windows can run in taskbar (Mark Larsen) +- in admin|edit page link to edit|controller (Nathan Freeze) +- better error codes and routes_onerror (Timothy Farrell) +- DAL support for groupy and having +- DAL support for expressions instead of values +- DAL has experimental Informix support +- fixed bug with non-printable chars in DAL +- 'text' fields limited to 2**16 (to avoid mysql problems) +- widget has -quiet and -debug (Attila Csipa) +- web2py_session uses BLOB instead of TEXT +- improved IS_URL +- Runs with python 2.6 (Tim) +- On GAE uses GAE for static files (Robin) + + +## 1.49 +- fixed a bug with taskbar widget, thanks Mark +- fixed a bug with form.latest +- made many DIV methods private (_) + + +## 1.50 +- Fixed some bugs introduced in 1.49 + +## 1.51 +- Fixed more bugs introduced in 1.49 (sql _extra and html select) +- support for sqlite:memory: + +## 1.52 +- Fixed a minor bug with _extra[key] and key not str. +- check for upgrade via ajax + +## 1.53 +- On GAE upload data goes automatically in datastore (blob created automatically) +- New appadmin runs on GAE (most of it, not all) +- Martin Hufsky patch allow slicing of fields in DAL expressions + +## 1.54 +- fixed minor bugs + +## 1.55? +- rowcount +- fixed bug when IS_IN_DB involved multiple fields on GAE +- T.set_current_languages +- better unittests +- response.custom_commit and response.custom_rollback +- you can next cache calls (like cache a controller that caches a select). Thanks Iceberg +- db(....id==None).select() no longer returns an error but an empty SQLRows on GAE +- db(...).delete(delete_uploads=True) and SQLFORM.accepts(....delete_uploads=True) will delete all referenced uploaded files +- DIV.element and DIV.update +- sqlrows.json() +- SQLFORM.widgets +- URL(r=request,args=0) +- IS_IN_DB(...,multiple=True) for Many2Many (sort of) +- In URL(...,f) f is url encoded +- In routes_in=[['a/b/c/','a/b/c/?var=value']] +- simplejson 2.0.7 + + +## 1.56 +- Consider the following table: + +- db.define_table('cirlce', +- db.Field('radius','double'), +- db.Field('area','double'), +- db.Field('modified_on','datetime')) + +- now you can do: + +## add a comment in the forms +- db.circle.area.comment="(this is a comment)" + +## do not show area in create/edit forms +- db.circle.area.writable=False + +- ## do not show now in display forms +- db.circle.modified_on.readable=False + +## automatically timestamp when record cretaed +- db.circle.modified_on.default=request.now + +## automatically timestamp when record is modified +- db.circle.modified_on.update=request.now + +## make the radius appear in bold in display and table +- db.circle.radius.represent=lambda value: B(value) + +## make a form that automatically computes area +- pi=3.1415 +- form=SQLFOM(db.circle) +- if form.accepts(request.vars, +- onvalidation=lambda form: form.vars.area=pi*form.vars.radius**2): ... + +## make a create form in two possible ways: +- form=SQLFORM(db.circle) +- form=SQLFORM(db.circle,0) + +## make an update form in two possible ways: +- form=SQLFORM(db.circle,record) +- form=SQLFORM(db.circle,record_id) + +## make a display form in two possible ways: +- form=SQLFORM(db.circle,record,readonly=True) +- form=SQLFORM(db.circle,record_id,readonly=True) + +## so now you can do... + +- form=SQLFORM(db.circle,request.args[-1]) + +- and you get a create form if the URL ends in /0, you get an update +- form if the URL ends in /[valid_record_id] + +## you can also define once for all + +- timestamp=SQLTable(None,'timestamp', +- SQLField('created_on','datetime', +- writable=False, +- default=request.now), +- SQLField('modified_on','datetime', +- writable=False, +- default=request.now,update=request.now)) + +## and use it in all your tables + +- db.define_table('mytable',db.Field('somefield'),timestamp) + +## ## ## + +- One more feature in trunk.... + +- db.define_table('image',SQLField('file','upload')) + +- db.image.file.authorize=lambda row: True or False + +- then controller +- def download(): return response.download(request,db) +- id' is now a hidden field sqlform +- gql references converted to long +- admin login has autofocus +- new notation proposed by Robin, db.table[id] +- new UploadWidget shows images +- new generic.html shows request, response, session +- new LEGEND helper (thanks Marcus) +- fixed doctests in sql (thanks Robin) +- new notation for DB + +- record=db.table[id] +- db.table[id]=dict(...) +- del db.table[id] + +- request.env.web2py_version +- new class gluon.storage.Settings has lock_keys, lock_values +- jquery 1.3.1 +- PEP8 compliance +- new examples application +- runs on jython (no database drivers yet, thanks Phyo) +- fixed bugs in tests +- passes all unittest but test_rewite (not sure it should pass that one) + +- Lots of patches from Fran Boone (about tools) and Dougla Soares de Andarde (Python 2.6 compliance, user use of hashlib instead of md5, new markdown2.py) + +## 1.56.1-1.56.4 +- fixing lots of small bugs with tool and languages +- jquery.1.3.2 + +## 1.57 +- New ajax edit with keepalive (no longer logged out when editing code) +- Fixed conflict resolution page. +- Removed /user/bin/python from models/controllers + +## 1.58 +- Fixed some CRON bugs +- Fixed a bug with new ajax edit +- Experimental DB2 support in DAL +- Customizable font size in admin edit page +- New welcome/models/db.py shows how to memcache sessions on GAE with MEMDB +- More expressive titles in admin +- DB2 support. Thanks Denes! + +## 1.59-1.60 +- fixed lots of small bugs +- routes_in can filter by http_host + +## 1.61 +- fixed some typos +- auth.add_permissions(0,....) 0 indicates group of current user +- crud.update has deletable=True or False +- fixed issue with GAE detection -> gluon.settings.web2py_runtime -> request + +## 1.62 +- SQLFORMS and crud now show readble fields +- Better WingIDE support +- Languages are automatically translated +- T.force and lazyT works better, optional T.lazy=False +- gluon.storage.Messages are now translated without T +- if routes.py then request.env.web2py_original_uri +- db.table.field.isattachment = True +- internationalizaiton of admin by Yair +- admin.py by Alvaro +- new MENU helper +- new w2p file format +- new welcome app with auth, service and crud turned on + +## 1.63-1.63.4 +- no more import gluon. +- support for generic.xxx +- simplejson can handle datetime date and time + +## 1.63.5 +- You can do jQuery.noConflict() without breaking web2py_ajax +- Wigets can have attributes (thanks Hans) +- Lots of internal cleanup and better code reusage (thanks Hans) + +## 1.64 +- Models 2-3 times faster (thanks Alexey) +- Better LDAP support +- Works with Jython (including sqlite and postgresql with zxJDBC): + +- download jython-2.5rc3.jar +- download qlite-jdbc-3.6.14.2.jar +- java -jar jython-xxx.jar +- export CLASSPATH=$CLASSPATH:/Users/mdipierro/jython2.5rc3/sqlite-jdbc-3.6.14.2.jar +- cd web2py +- ../jython2.5rc3/jython web2py.py + +## 1.64.2 +- New IS_COMPLEX validator, thank Mr. Freeze +- Experimental Informix support +- Autologin on registration + +## 1.64.3 +- Some bug fixes + +## 1.64.4 +- Som bug fixes +- Informix Support +- response.render(stream) +- SQLFORM.factory +- SQLFORM.widgets.radio and SQLFORM.widgets.checkboxes + +## 1.65 +- reST docstrings for Sphinx, thanks Hans +- gluon/conrtib/login_methods/gae_google_account.py for google CAS login on GAE, thanks Hans +- fixed problem with Auth and Firebird 'password' issue +- new auth.settings.create_user_groups +- tickets stored on datastore on GAE and also logged, thanks Hans +- imporved IS_LENGTH with max and min, thanks Mateusz +- improved IS_EMAIL with filters, thanks Mateusz +- new IS_IMAGE checks for format and size, thanks Mateusz +- new IS_IPV4, thanks Mateusz + +## 1.65.1 +- spreadsheet +- shell history, thanks sherdim +- crontab editor, thanks Angelo +- gluon/contrib/login_methods/cas_auth.py (thanks Hans) +- DAL(...) instead of SQLDB(...) +- DAL('gae') instead of GQLDB() +- Field instead of SQLField +- (the old syntax still works) + +## 1.65.2 +- Fixed some small auth bugs +- Field.store(...) + +## 1.65.3-10 +- Fixed some small bugs and typos in the docstrings +- Fixed AMF3 support + +## 1.65.11 +- Fixed a sqlhtml bug with image upload + +## 1.65.12 +- lables in auth auto-translate (thanks Alvaro) +- better ldap_auth (thanks Fran) +- auth chacks locally for blocked accounts even for alternate login methods (thanks Fran) + +## 1.65.13 +- request.url (thanks Jonathan) +- restored uploadfield_newfilename +- new examples layout nad logo (thanks Mateusz) + +## 1.66 +- new doctypes +- form.vars.newfilename +- new HTML and XHTML helpers +- better IS_LENGTH + +## 1.67.0 +- Python 2.4 support (again) +- New layout for welcome +- changed defauld field sizes to 512 +- Field(uploadfolder="...") +- appadmin works on GAE (again, somehting got broken at some point) +- new wsgiserver 3.2.0 should fix recurrent broken download problems + +## 1.67.1 +- Bux fixed + +## 1.67.2 +- Security fix in markdown + +## 1.68.1 +- New official markdown with security fix +- rows.first() +- rows.last() +- New cron +- New hindi and spanish translation +- cached uploads allow for progress bars (thanks AndCycle) +- ingres support (thanks Chris) +- legacy database support for db2, mssql with non-int primary keys (thanks Denes) +- default setting of content-type (this may cause strange behavior in old apps when downloading images) +- IS_UPPER and IS_LOWER works with unicode +- CLENUP not takes regex of allowed/now allowed chartares +- New rewrite.py allows dynamic routes +- Better error messages for IS_INT_* and IS_FLOAT_* + +## 1.68.2 +- Fixing bug with admin and missing crontab +- Fixing bug with rewrite.load on GAE (thanks Willian Wang) + +## 1.69.1 +- Fixed a bug introduced in 1.68 about inserting unicode in DAL +- Fixed other small bugs +- Better support for legacy databases (thank Denes) +- response.meta replaces response.author, response.keywords, response.description +- response.files stets dependes in plugins +- better admin for packing/unpacking plugins +- reference fiels nor evaluate to DALRef with lazy evaluation (cool, thanks Mr Freeze) +- can insert a record in place of a reference +- record[e] instead of record._extra[e] (tentatively!) +- record.update_record() with no args +- rows.find() (thanks Mr Freeze) +- rows.exclude() +- rows.sort() +- rows[:] + +## 1.70.1 +- Fixed bug with Rows.as_list and DALRef +- Added Rows.as_dict (thanks Mr Freeze and Thedeus) +- Added request.wsgi (thanks hcvst) allows running wsgi apps under web2py and applying wegi middleware to regular web2py actions that return strings. +- Experimental distributed transactions between postgresql, mysql and firebird +- Finally local_import is here! + +## 1.71.1 +- Complete rewrite of Rows +- renamed DALStorage->Rows, DALRef->Reference +- Experimental serializarion of Row and Rows (get serialized to dict and list of dict) +- DAL(...,folder) and template.render(content=, context=) make it more modular + +## 1.72.1 - 1.72.3 +- Better support for legacy databases + +## 1.73.1 +- Fixed problem with storage and comparison of Row objects +- Fixed problem with mail on GAE +- Fixed problem with T in IS_DATE(TIME) error_message and format +- Rows[i].delete_record() +- Even better support for legacy databases +- Experimantal support for non UTF8 encoding in DB +- Better IPV4 (thanks Thandeus) +- T.current_languages default to 'en' and new T.set_current_languages(...) (thanks Yarko) +- INPUT(...,hideerror=False) used to fix rare chechbox widget problem +- Admin allows change of admin password +- New gluon/contrib/populate.py +- Size of input/textarea set by CSS no more by jQuery (thanks Iceberg) +- Customizable CSV (thanks Thandeus) +- More bug fixed (thanks Thandeus) +- Better regex for template fixed Jython problem (thank Jonathan) + +## 1.74.1 +- Moved to mercurial +- Default validators use the new define_table(....,format='...') +- New get_vars and post_vars compatible in 2.5 and 2.6 (thanks Tim) +- Major rewrite of gql.py extends DAL syntax on GAE +- No more *.w2p, welcome.w2p is create automatically, base apps are always upgraded +- export_to_csv(delimiter = ',', quotechar = '"', quoting = csv.QUOTE_MINIMAL), thanks Thadeus + +## 1.74.2-4 +- Fix bugs including including unicode in emails and blobs on GAE + +## 1.74.5 +- bug fixes +- restored python 2.4 support,thanks ont.rif +- support for native types on Google App Engine +- cache.ram usage statictics, thanks Thadus +- no more auth manu in scaffolding +- no more spash screen with -Q +- fixed doctest in html.py, thanks Anand Vaidya +- export_to_csv_file has represent, thanks Thadeus + +## 1.74.6 +- bug fixes +- IS_IN_DB(...,_and=IS_NOT_IN_DB) +- Smaller populate, thanks Piotr +- better slicing of fields, thanks Michael Fig +- Cache stats, thanks Thadeus +- Better gql.py +- IS_IN_DB and IS_IN_SET default to zero='', no longer zero=None + +## 1.74.7 +- request_password_reset and password reset verification +- python web2py.py -S app -M -R script.py -A arg1 arg2 arg3 +- T("%(a)s") % dict(a="hello") + +## 1.74.8 +- IS_SLUG, thanks Gustavo and Jonathan +- web2py.py -nogui, thanks Jeff Bauer +- solved a problem with jython, thanks Tim Farrel +- login has "remember be option", thanks Piotr Banasziewicz +- fixed problem with keepvalue in update forms, thanks Miguel Lopez + +## 1.74.9 +- IS_IN_SET(((0,'label0'),(1,'label1'))), thanks Falko Krause +- SQLFORM(...).accpets stores True or False in boolean types no None, thanks Frederik Wagner +- SQLFORM.factory(...,table_name='no_table'), thanks Thedeus +- jQuery 1.4.1 +- Fixed major problem with internationalization of multiple languages. +- Fixed a serius security issue with login +- Possibly fixed some issues with cron + +## 1.75.1 +- better cron +- better fetch +- logging of email failures +- new web2py.fedora.sh +- new setup-web2py-ubuntu.sh +- experimental autocomplete +- menus work on IE6 + +## 1.75.2 +- fetch supports cache +- curd.update(....,onaccept=crud.archive) magic +- new UUID mechnism fixes session conflicts with cloned machine in cloud +- allow to upload app and overwrite existing old ones, thanks Jonathan +- print gluon.tools.prettydate(request.now,T), thanks Richard + +## 1.75.3 +- added support for PAM authentican for apps and for admin +- INTRODUCED MAJOR BUG IN BEAUTIFY (upgrade to 1.75.4) IMMEDIATELY + +## 1.75.4 +- customizable BEAUTIFY, thanks John + +## 1.75.5 +- fixed behaviour with languages.py, thanks Iceberg +- added chinese (thanks Iceberg) and Hungarian (thanks Gyuris) +- fixed problem with GAE deleted by id (thanks what_ho) +- fixed bug in LOAD with custom views, thanks vhang +- improved IS_IN_SET takes iterator, dict, list and list of tuples, thanks Iceberg +- Auth(...,controller='default') +- Fixed major bug in parsing repeated request.vars, thanks Ben +- IS_DATE and IS_DATETIME can now handle any 00).select(),headers='fieldname:capitalize') +- Oracle limitby improved (thanks Sergey) +- fixed migrations in Firebird, thanks Jose Jachuf +- gluon/contrib/login_methods/linkedin_account.py (to be tested) + +## 1.76.5 +- Fixed a typo in auth that created some registration problems + +## 1.77.1 +- Replaced CherryPy with Rocket web server, thanks Tim +- CacheOnDisk allows to specify a folder +- IS_DATE/DATETIME can handle any year since 0 +- SQLTABLE(...,headers='fieldname:capitalize') +- Field().with_alias, thanks Nathan and Mengu +- has_membership(group=...,role=...), thank Jonathan +- db.define_table(username=True), thanks Jonathan +- gluon.tools.prettydate +- can specify hostname in routes_out (same syntax as routes in), thanks Martin +- db.table.bulk_insert([...records...]) now works on GAE, thanks Jon +- IS_EMAIL validates on 'localhost', thanks Jonathan +- welcome/views/layout.html uses ez.css, thanks Yarko +- mail attachments support utf8, thanks szimszon +- works with PyPy, thanks Joe +- better Firebird support, thanks Jose +- better Oracle support, thanks Gabriele +- cron supports days of week +- SQLFORM(...,formstyle="table3cols") or "table2cols" or "divs" or "ul" +- crud.settings.formstyle +- web2py.py -f folder allows to specify locations of applications, thanks Iceberg +- better/faster regex in template works in Jython +- fixed lots of small bugs + +## 1.77.2 +- fixed x-index in calendar +## 1.77.3 +- some cleanup of code in compileapp + +## 1.78.1 +- new template system allows {{block name}}{{end}}, thanks Thadeus +- fixed mime headers in emails, included PGP in emails, thanks Gyuris +- automatic database retry connect when pooling and lost connections +- OPTGROUP helper, thanks Iceberg +- web2py_ajax_trap captures all form submissions, thank you Skiros +- multicolumn checkwidget and arbitrary chars in multiple is_in_set, thanks hy +- Québécois for welcome, thanks Chris +- crud.search(), thanks Mr Freeze +- DAL(...migrate,fake_migrate), thanks Thadeus + +## 1.78.3 +- reverted temporarily to old template system because of backward compatibility issues + +## 1.79.1 +- x509 emails, thanks Gyuris +- attachment and html in Mail on GAE, thanks PanosJee +- fixed docstring in SQLTABLE, thanks aabelyakov +- TAG(html) parese html into helpers (experimental, still some problems with unicode, , thanks RobertVa for unicode help) +- DIV.elements(find=re.compile(....)) +- DIV.flatten() +- DIV.elements('....') supports jQuery syntax in '....' +- better it-it.py and it.py, thanks Marcello Della Longa +- Many Bug fixes: +- improved support for DAL and joins in postgresql/oracle, thanks Nico de Groot +- bux fixex in html.py, thanks Ian +- fixed an issue with registration_key==None, thanks Jay Kelkar +- fixed bug in gql.py, thanks NoNoNo +- fixed problem with multiple and checkboxes, thanks MIchael Howden +- fixed bug in gae, thanks NoNoNo +- restored 2.4 compatibility, thanks Paolo Gasparello +- auth.update() when pictures in profile +- formstyle can be a function, thanks Howden +- escape in sanitizer, thanks Howes +- add missing settings, thanks Hamdy +- find and exclude return empty Rows instead of [], thanks iceberg +- simplejson 2.1.1 should fix compatibility problems +- added sms_utils and Authorize.net in contrib + +## 1.79.2 +- solved simplejson imcompatibility problem + +## 1.80.1 +- MARKMIN helper (no backward compatibility promise yet) +- self._last_reference, thanks Dave (no backward compatibility promise yet) +- IS_EQUAL_TO +- zh-tw and better internationalization page, thanks Daniel Lin and Iceberg +- better crud.search, thanks MrFreeze +- Rocket interfaces, thanks Nik Klever +- db.table.field.uploadseparate=True, thanks Gyuris +- SCOPE_IDENITY for MSSQL, thanks Jose +- fixed email attachment issue, thanks Bob_in_Comox +- fixed problem with groupby and IS_IN_DB +- other bug fixes +- new implementation for local_import +- ajax(..,...,null) +- fixed Chrome bug in calendar.js, thanks Iceberg +- experimental scrips/web2py-setup-fedora.sh +- generic.load, thanks Iceberg + +## 1.81.1 +- rpx (janrain) support out of the box, allows login with Facebook, MySpace, etc. Thanks Mr Freeze +- Increased security (escape single and double quotes, thanks Craig" +- Fixed a bug with db.table.field.uploadseparate=True and autodelete +- New welcome app with superfish and jQuery 1.4.2 +- Deleted openwysiwyg from admin +- In XML and xmlescape quote defaults to True. Both ' and " are escaped. Thanks Craig Younkins + +## 1.81.2 +- fixed bug in Auth + +## 1.81.3 +- fixed bug in label names in formstyle +- fixed id names in admin test.html page + +## 1.81.4 +- Fixed gluon.tools to work work with load and base.css to nowrap labels + +## 1.81.5 +- Fixed a few bugs. The most important bugs we fixed are in memcache (thanks Scott) and in a process starvation issue with Rocket (thanks Mike Ellis and Tim). + +## 1.82.1 +- request.ajax to detect if action is called via ajax, tahnks Jonathan and David Mako +- more captcha options, thanks Vidul +- openid and oauth2 thanks Michele and Keith +- better PluginManager and load components +- new template system, thanks Thadeus +- new db.table(id,[field=value]) and db.table(query) syntax +- URL('index') (no more r=request), thanks Thadeus +- mail.send(message='...', ....) +- DAL([....]) for load balancing +- @service.soap(...) with mysimplesoap, thanks Mariano +- hideerror + +## 1.83.1 +- New error reporting mechanism (thanks Mariano) +- New routing system with app level routing (thanks Jonathan) +- Integrated GAE appstat and GAE precompilation (thanks Scott) +- New Field types "list:string", "list:integer", "list:reference" +- request.cid, request.ajax, A(cid=request.cid), response.js + +## 1.83.2 +- mostly cleanup + +## 1.84.1-4 +- flash now stays put in the top right corner +- improved behavior for URL and T objects +- new app level logging with logging.conf (thanks Jonathan) +- improved OpenID (thanks Michele) +- web2py_ajax handles prepend, append, hide (thanks Juris) +- web2py_ajax also handels pre-validation of decimal fields +- ru-ru translation (thanks Michele) +- sk-sk translation (thanks Julius) +- migrations save .table only if changed and after each ALTER TABLE (no more mysql inconsistencies) +- fixed bugs in SQLCustomField, Field(default=...), IS_IMAGE, IS_DECIMAL_IN_RANGE and a few more. +- Better validators (IS_DECIMAL_IN_RANGE, IS_INT_IN_RANGE, etc) thanks Jonatham +- Polymmodel support on GAE +- Experimental ListWidget +- moved DAL and routes to thread.local (thanks Jonathan, again) +- scripts/extract_mysql_models.py, thanks Falko Krause and Ron McOuat +- scripts/dbsessions2trash.py, thanks Scott + +## 1.85.1-3 +- fixed some bugs +- added pyfpdf, thank Mariano + +## 1.86.1-1.86.3 +- markmin2latex +- markmin2pdf +- fixed some bugs +- Storage getfirst, getlast, getall by Kevin and Nathan +- db(db.table), db(db.table.id) both suported and equivalent to db(db.table.id>0) +- postresql ssl support +- less un-necessary logging and warnings on GAE +- IS_DECIMAL_IN_RANGE and IS_FLOAT_IN_RANGE support dot="," (dot="." is default) +- on_failed_authorization can be a function, thanks Niphold +- gluon/contrib/login_methods/cas_auth.py for integration between CAS and Auth. + +## 1.86.3 +- Error reporting on save, thanks Mariano +recalled + +## 1.87.1-2 +- new layout for examples, thanks Bruno and Martin +- admin allow ``DEMO_MODE=True`` and ``FILTER_APPS=['welcome']`` +- fixed a possible problem with CRON and paths + + +## 1.87.3 +- fixed a major bug introduced in 1.87.1 that prevents appadmin from working for new apps created with 1.87.1-2. +- upgraded to clockpick 1.28, thanks villas + +## 1.88.1-2 +- better list: string support, thanks Bob +- jquery 1.4.3 +- scripts/autoroutes.py +- new admin wizard +- added retrieve_username to navbar (if username) +- internal rewrite for arbitrary paths (abspath), thanks Jonathan +- populate support for list: and decimal, thanks Chirstian +- markmin2latex has extra attribute +- better mercual admin allows list of files, versions and retrieve +- new error report system, thanks Thadeus and Selecta +- SQLFORM.accepts(detect_record_change).record_changed +- fixed cron for bytecode compiled apps, thanks Álvaro J. Iradier Muro +- other bugs fixes and pep8 compliant fixes + +## 1.89.1-.5 +- new admin layout (thanks Branko Vukelic) +- new admin search +- new admin language selector (thanks Yair) +- new Welcome app (thanks Martin Mulone) +- better wizard +- admin support for DEMO_MODE=True +- admin exposes GAE deployment button (always) +- MENU support None links (thanks Michael Wolfe) +- web2py.py -J for running cron (thanks Jonathan Lundell) +- fixed ~db.table.id on GAE (thanks MicLee) +- service.jsonrpc supports service.JsonRpcException (thanks Matt) +- bug fixes + +## 1.90.1 +- new DAL (complete rewrite of the web2py DAL is more modular) +- rewrite has fail safe reload, thanks Jonathan +- better CAS with v2 support, thanks Olivier ROCH VILATO +- better markmin2latex +- session.connect(separate=True) to handle many session files, thanks huaiyu wang +- changed bahvior of impersonate (more secure, can generate form or used as API) +- new rocket, thanks Tim +- new pyfpdf +- no more old style classes +- experimental couchdb support in new dal (only insert, select, update by id) +- mysql support out of the box via pymysql +- SQLITABLE(...,headers='labels') thanks Bruno +- optional: digitally signed URLs, thanks Brian Meredyk +- minor bug fixes + +## 1.90.2-4 +- pymysql no longer requires ssl (if not used) +- fixed bug with virtualfields +- fixed bug in truncate (new dal) +- fixed bug in select with alternate primary key (new dal) +- fixed bug with IS_IN_DB and self refences (also new dal) + +## 1.90.5 +- set poll = False in rocket because of poll python thread bug often unfixed, thanks Jonathan +- fixes issue with crud and reCaptcha + +## 1.90.6 +- fix issue with pickling new dal Row and Rows. + +## 1.91.1 +- LICENSE CHANGE FROM GPLv2 to LGPLv3 +- URL(...,hash_vars=...) allows to specify which vars need to be signed +- fixed bug with aliasing in new DAL + +## 1.91.2-1.91.5 +- fixed a problem with deplyment on GAE +- other new dal bug fixes + +## 1.91.6 +- web2py comet via gluon/contrib/comet_messaging.py (html5 websockets) experimental +- fixed problem with services (broken in 1.91.5), thanks Vollrath +- customizable uploadwidget, thanks Fran +- fixed problem with mail unicode support, thanks Richard +- fixed problem with linkto=None and references fields in SQLTABLE, thanks villas +- no more upgrade button on windows since does not work +- better remember-me login, thanks Martin Weissenboeck +- support for recatcha options +- support for GAE namespaces via DAL('gae://namespace') +- new rocket (1.2.2), thanks Tim +- many other bug fixes and improvements (thanks Jonathan) + +## 1.92.1 +- much improved routing (thanks Jonathan) +- Expression.__mod__ (thanks Denes) +- admin has MULTI_USER_MODE (admin/models/0.py) +- support for count(distinct=...) +- has_permissions(...,group_id) +- IS_MATCH(...,strict=True) +- URL(...,scheme=,host=,port=), thanks Jonathan +- admin in Afrikaans, thanks Caleb +- auth.signature (experimental) +- many other bug fixes + +## 1.93.1-2 +- support for multiple interfaces, thanks Jonathan +- jquery 1.5.1 +- simplejson 2.1.3 +- customizable simplejson +- leaner app.yaml +- css3 buttons in welcome +- android support (experimental) +- Field(':hidden'), Field('.readonly'), Field('name=value') +- combined expressions print db.data.body.len().sum() +- wizard can download plugins +- better json serilization (object.custom_json) +- better xml serialization (object.custom_xml) +- better formstyle support +- better comet_messaging.py (needs more testing) +- many bug fixes + +## 1.94.1 +- moderniz 1.17 +- web2py no longer saves session if no change, this makes it up up to 10x faster for simple actions +- experimental REST API +- better support for MSSQL NOT NULL +- small bug fixes + +## 1.94.2 +- reverted wrong behavior of auth.requires(condition) in 1.94.1 + +## 1.94.3 +- fixed major bug in auth redirection + +## 1.94.4 +- removed debug print statement that caused problems on GAE and mod_wsgi + +## 1.94.5 +- fixed a major bug with session introdued in 1.94.1 + +## 1.94.6 +- fixed a number of minor bugs including adding some missing files +- better session handling on session._unlock(..), thanks Jonathan +- added experimental pip support, thanks Lifeeth +- added experimental SAP DB support + +## 1.95.1 +- Google MySQL support (experimental) +- pip support, thanks lifeeth +- better setup_exe.py, thanks meredyk +- importved pyfpdf +- domain check in email_auth.py, thanks Gyuris +- added change_password_onvalidation and change_password_onaccept +- DAL(...,migrate_enabled=True) +- login_methods/loginza.py, thanks Vladimir +- bpython shell support, thanks Arun +- request.uuid and response.uuid (for a future toolbar) +- db._timings contains database query timing info +- efficient db(...).isempty() +- setup-web2py-nginx-uwsgi-ubuntu.sh +- Many bug fixes, thanks Jonathan + +## 1.96.1 + +- "from gluon import *" imports in every python module a web2py environment (A, DIV,..SQLFORM, DAL, Field,...) including current.request, current.response, current.session, current.T, current.cache, thanks Jonathan. +- conditional models in + models//a.py and models///a.py +- from mymodule import *, looks for mymodule in applications/thisapp/modules first and then in sys.path. No more need for local_import. Thanks Pierre. +- usage of generic.* views is - by default - restricted to localhost for security. This can be changed in a granular way with: response.generic_patterns=['*']. This is a slight change of behavior for new app but a major security fix. + +- all applications have cas 2.0 provider at http://.../user/cas/login +- all applications can delegate to login to external provider Auth(...,cas_provider='http://.../other_app/default/user/cas') +- A(...,callback=URL(...),larget='id') does Ajax +- URL(...,user_signature=True), LOAD(...,user_signature=True) can sign urls and @auth.requires_signature() will check the signature for any decorated action. + +- DAL(...,migrate_enabled=False) to disable all migrations +- DAL(...,fake_migrate_all=True) to rebuild all corrupted metadata +- new DAL metadata format (databases/*.table) +- DAL(...,adapter_arg={}) allows support for alternate drivers +- DAL now allows circular table defintions +- DAL(..,auto_import=True) automatically imports tables from metadata without need to db.define_table(...)s. +- new alterante syntax for inner joins: db(...).select(join=...) +- experimental cubrid database support +- DAL 'request_tenant' fields are special, the altomatically filer all records based on their default value. +- db._common_fields.append(Field('owner')) allows to add fields to ALL tables +- DAL ignores repeated fields with same names + +- web2py_ajax.html is more modular, thanks Anthony +- request.is_local +- request.is_http +- new sessions2trash.py thanks Jim Karsten +- corrupted cache files are automatically deleted +- new simpler API gluon.contrib.AuthorizeNet.procss(...) +- fixed recaptcha (as they released new API) +- messages in validators have default internationalization +- No more Auth(globals(),db), just Auth(db). Same for Crud and Service. +- scripts/access.wsgi allows apache+mod_wsgi to delegate authentication of any URL to any web2py app +- json now supports T(...) +- scripts/setup-web2py-nginx-uwsgi-ubuntu.sh +- web2py HTTP responses now set: "X-Powered-By: web2py", thanks Bruno +- mostly fixed generic.pdf. You can view any page in PDF if you have pdflatex installed or if your html follows the pyfpdf convention. +- auth.settings.extra_fields['auth_user'].append(Field('country')) allows to extend auth_* tables without need of definiting a custom auth_* table. Must be placed before auth.define_tables() +- {{=response.toolbar()}} to help you debug applications +- web based shell now supports object modifications (but no redefinitions of non-serializable types) +- jQuery 1.6.1 +- Lots of bug fixes + +# 1.96.2-1.96.4 +- bug fixes + +# 1.97.1 +- validate_and_update, thanks Bruno +- fixed problem with new custom import, thanks Mart +- fixed pyamf 0.6, thanks Alexei and Nickd +- fixed "+ =" bug in wizard +- fixed problem with allowed_patterns +- fixed problems with LOAD and vars and ajax +- closed lots of google code tickets +- checkboxes should now work with list:string +- web2py works on Android, thanks Corne Dickens +- new cpdb.py, thanks Mart +- improved translation (frech in particuler), thanks Pierre +- improved cas_auth.py, thanks Sergio +- IS_DATE and IS_DATETIME validators now work with native types +- better description of --shell, thanks Anthony +- extra SQLTABLE columns, thanks Martin +- fixed toolbar conflics, thanks Simon +- GAE password shows with **** + +# 1.98.1 +- fixed some problems with LOAD(ajax=False), thanks Anthony +- jquery 1.6.2 +- gevent.pywsgi adds ssl support, thanks Vasile +- import/export of blobs are base64 encoded +- max number of login attemts in admin, thanks Ross +- fixed joins with alias tables +- new field.custom_delete attribute +- removed resctions on large 'text fields, thanks Martin +- field.represent = lambda value,record: .... (record is optional) +- FORM.validate() and FORM.process(), thanks Bruno +- faster visrtualfields, thanks Howsec +- mail has ssl support separate from tls, thanks Eric +- TAG objects are now pickable +- new CAT tag for no tags +- request.user_agent(), thanks Ross +- fixed fawps support +- SQLFORM(...,separator=': ') now customizable +- many small bug fixes ADDED VERSION Index: VERSION ================================================================== --- /dev/null +++ VERSION @@ -0,0 +1,1 @@ +Version 1.98.2 (2011-08-04 00:47:09) ADDED __init__.py Index: __init__.py ================================================================== --- /dev/null +++ __init__.py @@ -0,0 +1,1 @@ + ADDED anyserver.py Index: anyserver.py ================================================================== --- /dev/null +++ anyserver.py @@ -0,0 +1,193 @@ +#!/usr/bin/env python +# -*- coding: utf-8 -*- + +""" +This file is part of the web2py Web Framework +Copyrighted by Massimo Di Pierro +License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) + +This file is based, althought a rewrite, on MIT code from the Bottle web framework. +""" + +import os, sys, optparse +path = os.path.dirname(os.path.abspath(__file__)) +os.chdir(path) +sys.path = [path]+[p for p in sys.path if not p==path] +import gluon.main +from gluon.fileutils import read_file, write_file + +class Servers: + @staticmethod + def cgi(app, address=None, **options): + from wsgiref.handlers import CGIHandler + CGIHandler().run(app) # Just ignore host and port here + + @staticmethod + def flup(app,address, **options): + import flup.server.fcgi + flup.server.fcgi.WSGIServer(app, bindAddress=address).run() + + @staticmethod + def wsgiref(app,address,**options): # pragma: no cover + from wsgiref.simple_server import make_server, WSGIRequestHandler + class QuietHandler(WSGIRequestHandler): + def log_request(*args, **kw): pass + options['handler_class'] = QuietHandler + srv = make_server(address[0],address[1],app,**options) + srv.serve_forever() + + @staticmethod + def cherrypy(app,address, **options): + from cherrypy import wsgiserver + server = wsgiserver.CherryPyWSGIServer(address, app) + server.start() + + @staticmethod + def rocket(app,address, **options): + from gluon.rocket import CherryPyWSGIServer + server = CherryPyWSGIServer(address, app) + server.start() + + @staticmethod + def rocket_with_repoze_profiler(app,address, **options): + from gluon.rocket import CherryPyWSGIServer + from repoze.profile.profiler import AccumulatingProfileMiddleware + from gluon.settings import global_settings + global_settings.web2py_crontype = 'none' + wrapped = AccumulatingProfileMiddleware( + app, + log_filename='wsgi.prof', + discard_first_request=True, + flush_at_shutdown=True, + path = '/__profile__' + ) + server = CherryPyWSGIServer(address, wrapped) + server.start() + + @staticmethod + def paste(app,address,**options): + from paste import httpserver + from paste.translogger import TransLogger + httpserver.serve(app, host=address[0], port=address[1], **options) + + @staticmethod + def fapws(app,address, **options): + import fapws._evwsgi as evwsgi + from fapws import base + evwsgi.start(address[0],str(address[1])) + evwsgi.set_base_module(base) + def app(environ, start_response): + environ['wsgi.multiprocess'] = False + return app(environ, start_response) + evwsgi.wsgi_cb(('',app)) + evwsgi.run() + + + @staticmethod + def gevent(app,address, **options): + from gevent import monkey; monkey.patch_all() + from gevent import pywsgi + from gevent.pool import Pool + pywsgi.WSGIServer(address, app, spawn = 'workers' in options and Pool(int(option.workers)) or 'default').serve_forever() + + @staticmethod + def bjoern(app,address, **options): + import bjoern + bjoern.run(app, *address) + + @staticmethod + def tornado(app,address, **options): + import tornado.wsgi + import tornado.httpserver + import tornado.ioloop + container = tornado.wsgi.WSGIContainer(app) + server = tornado.httpserver.HTTPServer(container) + server.listen(address=address[0], port=address[1]) + tornado.ioloop.IOLoop.instance().start() + + @staticmethod + def twisted(app,address, **options): + from twisted.web import server, wsgi + from twisted.python.threadpool import ThreadPool + from twisted.internet import reactor + thread_pool = ThreadPool() + thread_pool.start() + reactor.addSystemEventTrigger('after', 'shutdown', thread_pool.stop) + factory = server.Site(wsgi.WSGIResource(reactor, thread_pool, app)) + reactor.listenTCP(address[1], factory, interface=address[0]) + reactor.run() + + @staticmethod + def diesel(app,address, **options): + from diesel.protocols.wsgi import WSGIApplication + app = WSGIApplication(app, port=address[1]) + app.run() + + @staticmethod + def gnuicorn(app,address, **options): + import gunicorn.arbiter + gunicorn.arbiter.Arbiter(address, 4, app).run() + + @staticmethod + def eventlet(app,address, **options): + from eventlet import wsgi, listen + wsgi.server(listen(address), app) + + +def run(servername,ip,port,softcron=True,logging=False,profiler=None): + if logging: + application = gluon.main.appfactory(wsgiapp=gluon.main.wsgibase, + logfilename='httpserver.log', + profilerfilename=profiler) + else: + application = gluon.main.wsgibase + if softcron: + from gluon.settings import global_settings + global_settings.web2py_crontype = 'soft' + getattr(Servers,servername)(application,(ip,int(port))) + +def main(): + usage = "python anyserver.py -s tornado -i 127.0.0.1 -p 8000 -l -P" + try: + version = read_file('VERSION') + except IOError: + version = '' + parser = optparse.OptionParser(usage, None, optparse.Option, version) + parser.add_option('-l', + '--logging', + action='store_true', + default=False, + dest='logging', + help='log into httpserver.log') + parser.add_option('-P', + '--profiler', + default=False, + dest='profiler', + help='profiler filename') + servers = ', '.join(x for x in dir(Servers) if not x[0]=='_') + parser.add_option('-s', + '--server', + default='rocket', + dest='server', + help='server name (%s)' % servers) + parser.add_option('-i', + '--ip', + default='127.0.0.1', + dest='ip', + help='ip address') + parser.add_option('-p', + '--port', + default='8000', + dest='port', + help='port number') + parser.add_option('-w', + '--workers', + default='', + dest='workers', + help='number of workers number') + (options, args) = parser.parse_args() + print 'starting %s on %s:%s...' % (options.server,options.ip,options.port) + run(options.server,options.ip,options.port,logging=options.logging,profiler=options.profiler) + +if __name__=='__main__': + main() ADDED app.example.yaml Index: app.example.yaml ================================================================== --- /dev/null +++ app.example.yaml @@ -0,0 +1,88 @@ +# For Google App Engine deployment, copy this file to app.yaml +# and edit as required +# See http://code.google.com/appengine/docs/python/config/appconfig.html +# and http://web2py.com/book/default/chapter/11?search=app.yaml + +application: web2py +version: 1 +api_version: 1 +runtime: python + +default_expiration: "24h" + +derived_file_type: +- python_precompiled + +handlers: + +- url: /_ah/stats.* + script: $PYTHON_LIB/google/appengine/ext/appstats/ui.py + login: admin + +- url: /(?P.+?)/static/(?P.+) + static_files: applications/\1/static/\2 + upload: applications/(.+?)/static/(.+) + secure: optional + +- url: /favicon.ico + static_files: applications/welcome/static/favicon.ico + upload: applications/welcome/static/favicon.ico + +- url: /robots.txt + static_files: applications/welcome/static/robots.txt + upload: applications/welcome/static/robots.txt + +- url: /_ah/admin/.* + script: $PYTHON_LIB/google/appengine/ext/admin + login: admin + +- url: /_ah/queue/default + script: gaehandler.py + login: admin + +- url: .* + script: gaehandler.py + secure: optional + +admin_console: + pages: + - name: Appstats + url: /_ah/stats + +skip_files: | + ^(.*/)?( + (app\.yaml)| + (app\.yml)| + (index\.yaml)| + (index\.yml)| + (#.*#)| + (.*~)| + (.*\.py[co])| + (.*/RCS/.*)| + (\..*)| + (applications/(admin|examples)/.*)| + ((admin|examples|welcome)\.(w2p|tar))| + (applications/.*?/(cron|databases|errors|cache|sessions)/.*)| + ((logs|scripts)/.*)| + (anyserver\.py)| + (web2py\.py)| + ((cgi|fcgi|modpython|wsgi)handler\.py)| + (epydoc\.(conf|css))| + (httpserver\.log)| + (logging\.example\.conf)| + (route[rs]\.example\.py)| + (setup_(app|exe)\.py)| + (splashlogo\.gif)| + (parameters_\d+\.py)| + (options_std.py)| + (gluon/tests/.*)| + (gluon/(rocket|winservice)\.py)| + (contrib/(gateways|markdown|memcache|pymysql)/.*)| + (contrib/(populate|taskbar_widget)\.py)| + (google_appengine/.*)| + (.*\.(bak|orig))| + )$ + +builtins: +- remote_api: on +- datastore_admin: on ADDED appengine_config.py Index: appengine_config.py ================================================================== --- /dev/null +++ appengine_config.py @@ -0,0 +1,4 @@ +def webapp_add_wsgi_middleware(app): + from google.appengine.ext.appstats import recording + app = recording.appstats_wsgi_middleware(app) + return app ADDED applications/__init__.py Index: applications/__init__.py ================================================================== --- /dev/null +++ applications/__init__.py ADDED applications/admin/ABOUT Index: applications/admin/ABOUT ================================================================== --- /dev/null +++ applications/admin/ABOUT @@ -0,0 +1,6 @@ +web2py is an open source full-stack framework for agile development +of secure database-driven web-based applications, written and programmable in +Python. + +Created by Massimo Di Pierro + ADDED applications/admin/LICENSE Index: applications/admin/LICENSE ================================================================== --- /dev/null +++ applications/admin/LICENSE @@ -0,0 +1,137 @@ +## Web2py License + +Web2py is Licensed under the LGPL license version 3 +(http://www.gnu.org/licenses/lgpl.html) + +Copyrighted (c) by Massimo Di Pierro (2007-2011) + +### On Commercial Redistribution + +In accordance with LGPL you may: +- redistribute web2py with your apps (including official web2py binary versions) +- release your applications which use official web2py libraries under any license you wish +But you must: +- make clear in the documentation that your application uses web2py +- release any modification of the web2py libraries under the LGPLv3 license + +THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL +NECESSARY SERVICING, REPAIR OR CORRECTION. + +IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT +HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, +BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL +DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES +OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER +PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. + +(Earlier versions of web2py, 1.0.*-1.90.*, were released under the GPL2 license plus a +commercial exception which, for practical purposes, was very similar to the current LPGLv3) + +### Licenses for third party contributed software + +web2py contains third party software under the gluon/contrib/ folder. +Each file/module in contrib is distributed with web2py under its original license. +Here we list some of them. + +#### gluon.contrib.simplejson LICENSE + +Copyright (c) 2006 Bob Ippolito - Permission is hereby granted, free of charge, +to any person obtaining a copy of this software and associated documentation +files (the "Software"), to deal in the Software without restriction, including +without limitation the rights to use, copy, modify, merge, publish, distribute, +sublicense, and/or sell copies of the Software, and to permit persons to whom +the Software is furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. + +#### gluon.contrib.rss2.py (originally PyRSS2Gen) LICENSE + +This is copyright (c) by Dalke Scientific Software, LLC and released under the +BSD license. See the file LICENSE in the distribution or + for details. + +#### gluon.contrib.markdown (markdown2) LICENSE + +MIT License from from + +#### gluon.contrib.feedparser LICENSE + +Copyright (c) 2002-2005, Mark Pilgrim + +All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions +are met: + +* Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + +* Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS' +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. + +#### gluon.wsgiserver.py LICENSE (borrowed from cherrypy) + +Copyright (c) 2004, CherryPy Team (team@cherrypy.org) +All rights reserved. + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + * Neither the name of the CherryPy Team nor the names of its contributors + may be used to endorse or promote products derived from this software + without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE +FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +#### gluon.contrib.pam LICENSE + +Copyright (C) 2007-2009 Chris AtLee Licensed under the MIT license + +#### gluon.contrib.shell LICENSE + +Copyright (C) by Google inc. Apache 2.0 Lincense + +#### The javascript licenses are in the code itself + ADDED applications/admin/__init__.py Index: applications/admin/__init__.py ================================================================== --- /dev/null +++ applications/admin/__init__.py ADDED applications/admin/controllers/appadmin.py Index: applications/admin/controllers/appadmin.py ================================================================== --- /dev/null +++ applications/admin/controllers/appadmin.py @@ -0,0 +1,408 @@ +# -*- coding: utf-8 -*- + +# ########################################################## +# ## make sure administrator is on localhost +# ########################################################### + +import os +import socket +import datetime +import copy +import gluon.contenttype +import gluon.fileutils + +# ## critical --- make a copy of the environment + +global_env = copy.copy(globals()) +global_env['datetime'] = datetime + +http_host = request.env.http_host.split(':')[0] +remote_addr = request.env.remote_addr +try: + hosts = (http_host, socket.gethostname(), + socket.gethostbyname(http_host), + '::1','127.0.0.1','::ffff:127.0.0.1') +except: + hosts = (http_host, ) + +if request.env.http_x_forwarded_for or request.env.wsgi_url_scheme\ + in ['https', 'HTTPS']: + session.secure() +elif (remote_addr not in hosts) and (remote_addr != "127.0.0.1"): + raise HTTP(200, T('appadmin is disabled because insecure channel')) + +if (request.application=='admin' and not session.authorized) or \ + (request.application!='admin' and not gluon.fileutils.check_credentials(request)): + redirect(URL('admin', 'default', 'index')) + +ignore_rw = True +response.view = 'appadmin.html' +response.menu = [[T('design'), False, URL('admin', 'default', 'design', + args=[request.application])], [T('db'), False, + URL('index')], [T('state'), False, + URL('state')], [T('cache'), False, + URL('ccache')]] + +# ########################################################## +# ## auxiliary functions +# ########################################################### + + +def get_databases(request): + dbs = {} + for (key, value) in global_env.items(): + cond = False + try: + cond = isinstance(value, GQLDB) + except: + cond = isinstance(value, SQLDB) + if cond: + dbs[key] = value + return dbs + + +databases = get_databases(None) + + +def eval_in_global_env(text): + exec ('_ret=%s' % text, {}, global_env) + return global_env['_ret'] + + +def get_database(request): + if request.args and request.args[0] in databases: + return eval_in_global_env(request.args[0]) + else: + session.flash = T('invalid request') + redirect(URL('index')) + + +def get_table(request): + db = get_database(request) + if len(request.args) > 1 and request.args[1] in db.tables: + return (db, request.args[1]) + else: + session.flash = T('invalid request') + redirect(URL('index')) + + +def get_query(request): + try: + return eval_in_global_env(request.vars.query) + except Exception: + return None + + +def query_by_table_type(tablename,db,request=request): + keyed = hasattr(db[tablename],'_primarykey') + if keyed: + firstkey = db[tablename][db[tablename]._primarykey[0]] + cond = '>0' + if firstkey.type in ['string', 'text']: + cond = '!=""' + qry = '%s.%s.%s%s' % (request.args[0], request.args[1], firstkey.name, cond) + else: + qry = '%s.%s.id>0' % tuple(request.args[:2]) + return qry + + + +# ########################################################## +# ## list all databases and tables +# ########################################################### + + +def index(): + return dict(databases=databases) + + +# ########################################################## +# ## insert a new record +# ########################################################### + + +def insert(): + (db, table) = get_table(request) + form = SQLFORM(db[table], ignore_rw=ignore_rw) + if form.accepts(request.vars, session): + response.flash = T('new record inserted') + return dict(form=form,table=db[table]) + + +# ########################################################## +# ## list all records in table and insert new record +# ########################################################### + + +def download(): + import os + db = get_database(request) + return response.download(request,db) + +def csv(): + import gluon.contenttype + response.headers['Content-Type'] = \ + gluon.contenttype.contenttype('.csv') + db = get_database(request) + query = get_query(request) + if not query: + return None + response.headers['Content-disposition'] = 'attachment; filename=%s_%s.csv'\ + % tuple(request.vars.query.split('.')[:2]) + return str(db(query).select()) + + +def import_csv(table, file): + table.import_from_csv_file(file) + +def select(): + import re + db = get_database(request) + dbname = request.args[0] + regex = re.compile('(?P\w+)\.(?P\w+)=(?P\d+)') + if len(request.args)>1 and hasattr(db[request.args[1]],'_primarykey'): + regex = re.compile('(?P
\w+)\.(?P\w+)=(?P.+)') + if request.vars.query: + match = regex.match(request.vars.query) + if match: + request.vars.query = '%s.%s.%s==%s' % (request.args[0], + match.group('table'), match.group('field'), + match.group('value')) + else: + request.vars.query = session.last_query + query = get_query(request) + if request.vars.start: + start = int(request.vars.start) + else: + start = 0 + nrows = 0 + stop = start + 100 + table = None + rows = [] + orderby = request.vars.orderby + if orderby: + orderby = dbname + '.' + orderby + if orderby == session.last_orderby: + if orderby[0] == '~': + orderby = orderby[1:] + else: + orderby = '~' + orderby + session.last_orderby = orderby + session.last_query = request.vars.query + form = FORM(TABLE(TR(T('Query:'), '', INPUT(_style='width:400px', + _name='query', _value=request.vars.query or '', + requires=IS_NOT_EMPTY(error_message=T("Cannot be empty")))), TR(T('Update:'), + INPUT(_name='update_check', _type='checkbox', + value=False), INPUT(_style='width:400px', + _name='update_fields', _value=request.vars.update_fields + or '')), TR(T('Delete:'), INPUT(_name='delete_check', + _class='delete', _type='checkbox', value=False), ''), + TR('', '', INPUT(_type='submit', _value='submit'))), + _action=URL(r=request,args=request.args)) + if request.vars.csvfile != None: + try: + import_csv(db[request.vars.table], + request.vars.csvfile.file) + response.flash = T('data uploaded') + except Exception, e: + response.flash = DIV(T('unable to parse csv file'),PRE(str(e))) + if form.accepts(request.vars, formname=None): +# regex = re.compile(request.args[0] + '\.(?P
\w+)\.id\>0') + regex = re.compile(request.args[0] + '\.(?P
\w+)\..+') + + match = regex.match(form.vars.query.strip()) + if match: + table = match.group('table') + try: + nrows = db(query).count() + if form.vars.update_check and form.vars.update_fields: + db(query).update(**eval_in_global_env('dict(%s)' + % form.vars.update_fields)) + response.flash = T('%s rows updated', nrows) + elif form.vars.delete_check: + db(query).delete() + response.flash = T('%s rows deleted', nrows) + nrows = db(query).count() + if orderby: + rows = db(query).select(limitby=(start, stop), + orderby=eval_in_global_env(orderby)) + else: + rows = db(query).select(limitby=(start, stop)) + except Exception, e: + (rows, nrows) = ([], 0) + response.flash = DIV(T('Invalid Query'),PRE(str(e))) + return dict( + form=form, + table=table, + start=start, + stop=stop, + nrows=nrows, + rows=rows, + query=request.vars.query, + ) + + +# ########################################################## +# ## edit delete one record +# ########################################################### + + +def update(): + (db, table) = get_table(request) + keyed = hasattr(db[table],'_primarykey') + record = None + if keyed: + key = [f for f in request.vars if f in db[table]._primarykey] + if key: + record = db(db[table][key[0]] == request.vars[key[0]]).select().first() + else: + record = db(db[table].id == request.args(2)).select().first() + + if not record: + qry = query_by_table_type(table, db) + session.flash = T('record does not exist') + redirect(URL('select', args=request.args[:1], + vars=dict(query=qry))) + + if keyed: + for k in db[table]._primarykey: + db[table][k].writable=False + + form = SQLFORM(db[table], record, deletable=True, delete_label=T('Check to delete'), + ignore_rw=ignore_rw and not keyed, + linkto=URL('select', + args=request.args[:1]), upload=URL(r=request, + f='download', args=request.args[:1])) + + if form.accepts(request.vars, session): + session.flash = T('done!') + qry = query_by_table_type(table, db) + redirect(URL('select', args=request.args[:1], + vars=dict(query=qry))) + return dict(form=form,table=db[table]) + + +# ########################################################## +# ## get global variables +# ########################################################### + + +def state(): + return dict() + +def ccache(): + form = FORM( + P(TAG.BUTTON("Clear CACHE?", _type="submit", _name="yes", _value="yes")), + P(TAG.BUTTON("Clear RAM", _type="submit", _name="ram", _value="ram")), + P(TAG.BUTTON("Clear DISK", _type="submit", _name="disk", _value="disk")), + ) + + if form.accepts(request.vars, session): + clear_ram = False + clear_disk = False + session.flash = "" + if request.vars.yes: + clear_ram = clear_disk = True + if request.vars.ram: + clear_ram = True + if request.vars.disk: + clear_disk = True + + if clear_ram: + cache.ram.clear() + session.flash += "Ram Cleared " + if clear_disk: + cache.disk.clear() + session.flash += "Disk Cleared" + + redirect(URL(r=request)) + + try: + from guppy import hpy; hp=hpy() + except ImportError: + hp = False + + import shelve, os, copy, time, math + from gluon import portalocker + + ram = { + 'bytes': 0, + 'objects': 0, + 'hits': 0, + 'misses': 0, + 'ratio': 0, + 'oldest': time.time() + } + disk = copy.copy(ram) + total = copy.copy(ram) + + for key, value in cache.ram.storage.items(): + if isinstance(value, dict): + ram['hits'] = value['hit_total'] - value['misses'] + ram['misses'] = value['misses'] + try: + ram['ratio'] = ram['hits'] * 100 / value['hit_total'] + except (KeyError, ZeroDivisionError): + ram['ratio'] = 0 + else: + if hp: + ram['bytes'] += hp.iso(value[1]).size + ram['objects'] += hp.iso(value[1]).count + + if value[0] < ram['oldest']: + ram['oldest'] = value[0] + + locker = open(os.path.join(request.folder, + 'cache/cache.lock'), 'a') + portalocker.lock(locker, portalocker.LOCK_EX) + disk_storage = shelve.open(os.path.join(request.folder, 'cache/cache.shelve')) + try: + for key, value in disk_storage.items(): + if isinstance(value, dict): + disk['hits'] = value['hit_total'] - value['misses'] + disk['misses'] = value['misses'] + try: + disk['ratio'] = disk['hits'] * 100 / value['hit_total'] + except (KeyError, ZeroDivisionError): + disk['ratio'] = 0 + else: + if hp: + disk['bytes'] += hp.iso(value[1]).size + disk['objects'] += hp.iso(value[1]).count + if value[0] < disk['oldest']: + disk['oldest'] = value[0] + finally: + portalocker.unlock(locker) + locker.close() + disk_storage.close() + + total['bytes'] = ram['bytes'] + disk['bytes'] + total['objects'] = ram['objects'] + disk['objects'] + total['hits'] = ram['hits'] + disk['hits'] + total['misses'] = ram['misses'] + disk['misses'] + try: + total['ratio'] = total['hits'] * 100 / (total['hits'] + total['misses']) + except (KeyError, ZeroDivisionError): + total['ratio'] = 0 + + if disk['oldest'] < ram['oldest']: + total['oldest'] = disk['oldest'] + else: + total['oldest'] = ram['oldest'] + + def GetInHMS(seconds): + hours = math.floor(seconds / 3600) + seconds -= hours * 3600 + minutes = math.floor(seconds / 60) + seconds -= minutes * 60 + seconds = math.floor(seconds) + + return (hours, minutes, seconds) + + ram['oldest'] = GetInHMS(time.time() - ram['oldest']) + disk['oldest'] = GetInHMS(time.time() - disk['oldest']) + total['oldest'] = GetInHMS(time.time() - total['oldest']) + + return dict(form=form, total=total, + ram=ram, disk=disk) + ADDED applications/admin/controllers/default.py Index: applications/admin/controllers/default.py ================================================================== --- /dev/null +++ applications/admin/controllers/default.py @@ -0,0 +1,1222 @@ +# coding: utf8 + +from gluon.admin import * +from gluon.fileutils import abspath, read_file, write_file +from glob import glob +import shutil +import platform + +if DEMO_MODE and request.function in ['change_password','pack','pack_plugin','upgrade_web2py','uninstall','cleanup','compile_app','remove_compiled_app','delete','delete_plugin','create_file','upload_file','update_languages','reload_routes']: + session.flash = T('disabled in demo mode') + redirect(URL('site')) + +if not is_manager() and request.function in ['change_password','upgrade_web2py']: + session.flash = T('disabled in multi user mode') + redirect(URL('site')) + +if FILTER_APPS and request.args(0) and not request.args(0) in FILTER_APPS: + session.flash = T('disabled in demo mode') + redirect(URL('site')) + +def safe_open(a,b): + if DEMO_MODE and 'w' in b: + class tmp: + def write(self,data): pass + return tmp() + return open(a,b) + +def safe_read(a, b='r'): + safe_file = safe_open(a, b) + try: + return safe_file.read() + finally: + safe_file.close() + +def safe_write(a, value, b='w'): + safe_file = safe_open(a, b) + try: + safe_file.write(value) + finally: + safe_file.close() + +def get_app(name=None): + app = name or request.args(0) + if app and (not MULTI_USER_MODE or db(db.app.name==app)(db.app.owner==auth.user.id).count()): + return app + session.flash = 'App does not exist or your are not authorized' + redirect(URL('site')) + +def index(): + """ Index handler """ + + send = request.vars.send + if DEMO_MODE: + session.authorized = True + session.last_time = t0 + if not send: + send = URL('site') + if session.authorized: + redirect(send) + elif request.vars.password: + if verify_password(request.vars.password): + session.authorized = True + login_record(True) + + if CHECK_VERSION: + session.check_version = True + else: + session.check_version = False + + session.last_time = t0 + if isinstance(send, list): # ## why does this happen? + send = str(send[0]) + + redirect(send) + else: + times_denied = login_record(False) + if times_denied >= allowed_number_of_attempts: + response.flash = \ + T('admin disabled because too many invalid login attempts') + elif times_denied == allowed_number_of_attempts - 1: + response.flash = \ + T('You have one more login attempt before you are locked out') + else: + response.flash = T('invalid password.') + return dict(send=send) + + +def check_version(): + """ Checks if web2py is up to date """ + + session.forget() + session._unlock(response) + + new_version, version_number = check_new_version(request.env.web2py_version, + WEB2PY_VERSION_URL) + + if new_version == -1: + return A(T('Unable to check for upgrades'), _href=WEB2PY_URL) + elif new_version != True: + return A(T('web2py is up to date'), _href=WEB2PY_URL) + elif platform.system().lower() in ('windows','win32','win64') and os.path.exists("web2py.exe"): + return SPAN('You should upgrade to version %s' % version_number) + else: + return sp_button(URL('upgrade_web2py'), T('upgrade now')) \ + + XML(' %s' % version_number) + + +def logout(): + """ Logout handler """ + session.authorized = None + if MULTI_USER_MODE: + redirect(URL('user/logout')) + redirect(URL('index')) + + +def change_password(): + + if session.pam_user: + session.flash = T('PAM authenticated user, cannot change password here') + redirect(URL('site')) + form=SQLFORM.factory(Field('current_admin_password','password'), + Field('new_admin_password','password',requires=IS_STRONG()), + Field('new_admin_password_again','password')) + if form.accepts(request.vars): + if not verify_password(request.vars.current_admin_password): + form.errors.current_admin_password = T('invalid password') + elif form.vars.new_admin_password != form.vars.new_admin_password_again: + form.errors.new_admin_password_again = T('no match') + else: + path = abspath('parameters_%s.py' % request.env.server_port) + safe_write(path, 'password="%s"' % CRYPT()(request.vars.new_admin_password)[0]) + session.flash = T('password changed') + redirect(URL('site')) + return dict(form=form) + +def site(): + """ Site handler """ + + myversion = request.env.web2py_version + + # Shortcut to make the elif statements more legible + file_or_appurl = 'file' in request.vars or 'appurl' in request.vars + + if DEMO_MODE: + pass + + elif request.vars.filename and not 'file' in request.vars: + # create a new application + appname = cleanpath(request.vars.filename).replace('.', '_') + if app_create(appname, request): + if MULTI_USER_MODE: + db.app.insert(name=appname,owner=auth.user.id) + session.flash = T('new application "%s" created', appname) + redirect(URL('design',args=appname)) + else: + session.flash = \ + T('unable to create application "%s" (it may exist already)', request.vars.filename) + redirect(URL(r=request)) + + elif file_or_appurl and not request.vars.filename: + # can't do anything without an app name + msg = 'you must specify a name for the uploaded application' + response.flash = T(msg) + + elif file_or_appurl and request.vars.filename: + # fetch an application via URL or file upload + f = None + if request.vars.appurl is not '': + try: + f = urllib.urlopen(request.vars.appurl) + except Exception, e: + session.flash = DIV(T('Unable to download app because:'),PRE(str(e))) + redirect(URL(r=request)) + fname = request.vars.appurl + elif request.vars.file is not '': + f = request.vars.file.file + fname = request.vars.file.filename + + if f: + appname = cleanpath(request.vars.filename).replace('.', '_') + installed = app_install(appname, f, request, fname, + overwrite=request.vars.overwrite_check) + if f and installed: + msg = 'application %(appname)s installed with md5sum: %(digest)s' + session.flash = T(msg, dict(appname=appname, + digest=md5_hash(installed))) + elif f and request.vars.overwrite_check: + msg = 'unable to install application "%(appname)s"' + session.flash = T(msg, dict(appname=request.vars.filename)) + + else: + msg = 'unable to install application "%(appname)s"' + session.flash = T(msg, dict(appname=request.vars.filename)) + + redirect(URL(r=request)) + + regex = re.compile('^\w+$') + + if is_manager(): + apps = [f for f in os.listdir(apath(r=request)) if regex.match(f)] + else: + apps = [f.name for f in db(db.app.owner==auth.user_id).select()] + + if FILTER_APPS: + apps = [f for f in apps if f in FILTER_APPS] + + apps = sorted(apps,lambda a,b:cmp(a.upper(),b.upper())) + + return dict(app=None, apps=apps, myversion=myversion) + + +def pack(): + app = get_app() + + if len(request.args) == 1: + fname = 'web2py.app.%s.w2p' % app + filename = app_pack(app, request) + else: + fname = 'web2py.app.%s.compiled.w2p' % app + filename = app_pack_compiled(app, request) + + if filename: + response.headers['Content-Type'] = 'application/w2p' + disposition = 'attachment; filename=%s' % fname + response.headers['Content-Disposition'] = disposition + return safe_read(filename, 'rb') + else: + session.flash = T('internal error') + redirect(URL('site')) + +def pack_plugin(): + app = get_app() + if len(request.args) == 2: + fname = 'web2py.plugin.%s.w2p' % request.args[1] + filename = plugin_pack(app, request.args[1], request) + if filename: + response.headers['Content-Type'] = 'application/w2p' + disposition = 'attachment; filename=%s' % fname + response.headers['Content-Disposition'] = disposition + return safe_read(filename, 'rb') + else: + session.flash = T('internal error') + redirect(URL('plugin',args=request.args)) + +def upgrade_web2py(): + if 'upgrade' in request.vars: + (success, error) = upgrade(request) + if success: + session.flash = T('web2py upgraded; please restart it') + else: + session.flash = T('unable to upgrade because "%s"', error) + redirect(URL('site')) + elif 'noupgrade' in request.vars: + redirect(URL('site')) + return dict() + +def uninstall(): + app = get_app() + if 'delete' in request.vars: + if MULTI_USER_MODE: + if is_manager() and db(db.app.name==app).delete(): + pass + elif db(db.app.name==app)(db.app.owner==auth.user.id).delete(): + pass + else: + session.flash = T('no permission to uninstall "%s"', app) + redirect(URL('site')) + if app_uninstall(app, request): + session.flash = T('application "%s" uninstalled', app) + else: + session.flash = T('unable to uninstall "%s"', app) + redirect(URL('site')) + elif 'nodelete' in request.vars: + redirect(URL('site')) + return dict(app=app) + + +def cleanup(): + app = get_app() + clean = app_cleanup(app, request) + if not clean: + session.flash = T("some files could not be removed") + else: + session.flash = T('cache, errors and sessions cleaned') + + redirect(URL('site')) + + +def compile_app(): + app = get_app() + c = app_compile(app, request) + if not c: + session.flash = T('application compiled') + else: + session.flash = DIV(T('Cannot compile: there are errors in your app:'), + CODE(c)) + redirect(URL('site')) + + +def remove_compiled_app(): + """ Remove the compiled application """ + app = get_app() + remove_compiled_application(apath(app, r=request)) + session.flash = T('compiled application removed') + redirect(URL('site')) + +def delete(): + """ Object delete handler """ + app = get_app() + filename = '/'.join(request.args) + sender = request.vars.sender + + if isinstance(sender, list): # ## fix a problem with Vista + sender = sender[0] + + if 'nodelete' in request.vars: + redirect(URL(sender)) + elif 'delete' in request.vars: + try: + os.unlink(apath(filename, r=request)) + session.flash = T('file "%(filename)s" deleted', + dict(filename=filename)) + except Exception: + session.flash = T('unable to delete file "%(filename)s"', + dict(filename=filename)) + redirect(URL(sender)) + return dict(filename=filename, sender=sender) + +def peek(): + """ Visualize object code """ + app = get_app() + filename = '/'.join(request.args) + try: + data = safe_read(apath(filename, r=request)).replace('\r','') + except IOError: + session.flash = T('file does not exist') + redirect(URL('site')) + + extension = filename[filename.rfind('.') + 1:].lower() + + return dict(app=request.args[0], + filename=filename, + data=data, + extension=extension) + + +def test(): + """ Execute controller tests """ + app = get_app() + if len(request.args) > 1: + file = request.args[1] + else: + file = '.*\.py' + + controllers = listdir(apath('%s/controllers/' % app, r=request), file + '$') + + return dict(app=app, controllers=controllers) + +def keepalive(): + return '' + +def search(): + keywords=request.vars.keywords or '' + app = get_app() + def match(filename,keywords): + filename=os.path.join(apath(app, r=request),filename) + if keywords in read_file(filename,'rb'): + return True + return False + path = apath(request.args[0], r=request) + files1 = glob(os.path.join(path,'*/*.py')) + files2 = glob(os.path.join(path,'*/*.html')) + files3 = glob(os.path.join(path,'*/*/*.html')) + files=[x[len(path)+1:].replace('\\','/') for x in files1+files2+files3 if match(x,keywords)] + return response.json({'files':files}) + +def edit(): + """ File edit handler """ + # Load json only if it is ajax edited... + app = get_app() + filename = '/'.join(request.args) + # Try to discover the file type + if filename[-3:] == '.py': + filetype = 'python' + elif filename[-5:] == '.html': + filetype = 'html' + elif filename[-5:] == '.load': + filetype = 'html' + elif filename[-4:] == '.css': + filetype = 'css' + elif filename[-3:] == '.js': + filetype = 'js' + else: + filetype = 'html' + + # ## check if file is not there + + path = apath(filename, r=request) + + if request.vars.revert and os.path.exists(path + '.bak'): + try: + data = safe_read(path + '.bak') + data1 = safe_read(path) + except IOError: + session.flash = T('Invalid action') + if 'from_ajax' in request.vars: + return response.json({'error': str(T('Invalid action'))}) + else: + redirect(URL('site')) + + safe_write(path, data) + file_hash = md5_hash(data) + saved_on = time.ctime(os.stat(path)[stat.ST_MTIME]) + safe_write(path + '.bak', data1) + response.flash = T('file "%s" of %s restored', (filename, saved_on)) + else: + try: + data = safe_read(path) + except IOError: + session.flash = T('Invalid action') + if 'from_ajax' in request.vars: + return response.json({'error': str(T('Invalid action'))}) + else: + redirect(URL('site')) + + file_hash = md5_hash(data) + saved_on = time.ctime(os.stat(path)[stat.ST_MTIME]) + + if request.vars.file_hash and request.vars.file_hash != file_hash: + session.flash = T('file changed on disk') + data = request.vars.data.replace('\r\n', '\n').strip() + '\n' + safe_write(path + '.1', data) + if 'from_ajax' in request.vars: + return response.json({'error': str(T('file changed on disk')), + 'redirect': URL('resolve', + args=request.args)}) + else: + redirect(URL('resolve', args=request.args)) + elif request.vars.data: + safe_write(path + '.bak', data) + data = request.vars.data.replace('\r\n', '\n').strip() + '\n' + safe_write(path, data) + file_hash = md5_hash(data) + saved_on = time.ctime(os.stat(path)[stat.ST_MTIME]) + response.flash = T('file saved on %s', saved_on) + + data_or_revert = (request.vars.data or request.vars.revert) + + # Check compile errors + highlight = None + if filetype == 'python' and request.vars.data: + import _ast + try: + code = request.vars.data.rstrip().replace('\r\n','\n')+'\n' + compile(code, path, "exec", _ast.PyCF_ONLY_AST) + except Exception, e: + start = sum([len(line)+1 for l, line + in enumerate(request.vars.data.split("\n")) + if l < e.lineno-1]) + if e.text and e.offset: + offset = e.offset - (len(e.text) - len(e.text.splitlines()[-1])) + else: + offset = 0 + highlight = {'start': start, 'end': start + offset + 1} + try: + ex_name = e.__class__.__name__ + except: + ex_name = 'unknown exception!' + response.flash = DIV(T('failed to compile file because:'), BR(), + B(ex_name), T(' at line %s') % e.lineno, + offset and T(' at char %s') % offset or '', + PRE(str(e))) + + if data_or_revert and request.args[1] == 'modules': + # Lets try to reload the modules + try: + mopath = '.'.join(request.args[2:])[:-3] + exec 'import applications.%s.modules.%s' % (request.args[0], mopath) + reload(sys.modules['applications.%s.modules.%s' + % (request.args[0], mopath)]) + except Exception, e: + response.flash = DIV(T('failed to reload module because:'),PRE(str(e))) + + edit_controller = None + editviewlinks = None + view_link = None + if filetype == 'html' and len(request.args) >= 3: + cfilename = os.path.join(request.args[0], 'controllers', + request.args[2] + '.py') + if os.path.exists(apath(cfilename, r=request)): + edit_controller = URL('edit', args=[cfilename]) + view = request.args[3].replace('.html','') + view_link = URL(request.args[0],request.args[2],view) + elif filetype == 'python' and request.args[1] == 'controllers': + ## it's a controller file. + ## Create links to all of the associated view files. + app = get_app() + viewname = os.path.splitext(request.args[2])[0] + viewpath = os.path.join(app,'views',viewname) + aviewpath = apath(viewpath, r=request) + viewlist = [] + if os.path.exists(aviewpath): + if os.path.isdir(aviewpath): + viewlist = glob(os.path.join(aviewpath,'*.html')) + elif os.path.exists(aviewpath+'.html'): + viewlist.append(aviewpath+'.html') + if len(viewlist): + editviewlinks = [] + for v in viewlist: + vf = os.path.split(v)[-1] + vargs = "/".join([viewpath.replace(os.sep,"/"),vf]) + editviewlinks.append(A(T(vf.split(".")[0]),\ + _href=URL('edit',args=[vargs]))) + + if len(request.args) > 2 and request.args[1] == 'controllers': + controller = (request.args[2])[:-3] + functions = regex_expose.findall(data) + else: + (controller, functions) = (None, None) + + if 'from_ajax' in request.vars: + return response.json({'file_hash': file_hash, 'saved_on': saved_on, 'functions':functions, 'controller': controller, 'application': request.args[0], 'highlight': highlight }) + else: + + editarea_preferences = {} + editarea_preferences['FONT_SIZE'] = '10' + editarea_preferences['FULL_SCREEN'] = 'false' + editarea_preferences['ALLOW_TOGGLE'] = 'true' + editarea_preferences['REPLACE_TAB_BY_SPACES'] = '4' + editarea_preferences['DISPLAY'] = 'onload' + for key in editarea_preferences: + if globals().has_key(key): + editarea_preferences[key]=globals()[key] + return dict(app=request.args[0], + filename=filename, + filetype=filetype, + data=data, + edit_controller=edit_controller, + file_hash=file_hash, + saved_on=saved_on, + controller=controller, + functions=functions, + view_link=view_link, + editarea_preferences=editarea_preferences, + editviewlinks=editviewlinks) + +def resolve(): + """ + """ + + filename = '/'.join(request.args) + # ## check if file is not there + path = apath(filename, r=request) + a = safe_read(path).split('\n') + try: + b = safe_read(path + '.1').split('\n') + except IOError: + session.flash = 'Other file, no longer there' + redirect(URL('edit', args=request.args)) + + d = difflib.ndiff(a, b) + + def leading(line): + """ """ + + # TODO: we really need to comment this + z = '' + for (k, c) in enumerate(line): + if c == ' ': + z += ' ' + elif c == ' \t': + z += ' ' + elif k == 0 and c == '?': + pass + else: + break + + return XML(z) + + def getclass(item): + """ Determine item class """ + + if item[0] == ' ': + return 'normal' + if item[0] == '+': + return 'plus' + if item[0] == '-': + return 'minus' + + if request.vars: + c = ''.join([item[2:] for (i, item) in enumerate(d) if item[0] \ + == ' ' or 'line%i' % i in request.vars]) + safe_write(path, c) + session.flash = 'files merged' + redirect(URL('edit', args=request.args)) + else: + # Making the short circuit compatible with <= python2.4 + gen_data = lambda index,item: not item[:1] in ['+','-'] and "" \ + or INPUT(_type='checkbox', + _name='line%i' % index, + value=item[0] == '+') + + diff = TABLE(*[TR(TD(gen_data(i,item)), + TD(item[0]), + TD(leading(item[2:]), + TT(item[2:].rstrip())), _class=getclass(item)) + for (i, item) in enumerate(d) if item[0] != '?']) + + return dict(diff=diff, filename=filename) + + +def edit_language(): + """ Edit language file """ + app = get_app() + filename = '/'.join(request.args) + from gluon.languages import read_dict, write_dict + strings = read_dict(apath(filename, r=request)) + keys = sorted(strings.keys(),lambda x,y: cmp(x.lower(), y.lower())) + rows = [] + rows.append(H2(T('Original/Translation'))) + + for key in keys: + name = md5_hash(key) + if key==strings[key]: + _class='untranslated' + else: + _class='translated' + if len(key) <= 40: + elem = INPUT(_type='text', _name=name,value=strings[key], + _size=70,_class=_class) + else: + elem = TEXTAREA(_name=name, value=strings[key], _cols=70, + _rows=5, _class=_class) + + # Making the short circuit compatible with <= python2.4 + k = (strings[key] != key) and key or B(key) + + rows.append(P(k, BR(), elem, TAG.BUTTON(T('delete'), + _onclick='return delkey("%s")' % name), _id=name)) + + rows.append(INPUT(_type='submit', _value=T('update'))) + form = FORM(*rows) + if form.accepts(request.vars, keepvalues=True): + strs = dict() + for key in keys: + name = md5_hash(key) + if form.vars[name]==chr(127): continue + strs[key] = form.vars[name] + write_dict(apath(filename, r=request), strs) + session.flash = T('file saved on %(time)s', dict(time=time.ctime())) + redirect(URL(r=request,args=request.args)) + return dict(app=request.args[0], filename=filename, form=form) + + +def about(): + """ Read about info """ + app = get_app() + # ## check if file is not there + about = safe_read(apath('%s/ABOUT' % app, r=request)) + license = safe_read(apath('%s/LICENSE' % app, r=request)) + return dict(app=app, about=MARKMIN(about), license=MARKMIN(license)) + + +def design(): + """ Application design handler """ + app = get_app() + + if not response.flash and app == request.application: + msg = T('ATTENTION: you cannot edit the running application!') + response.flash = msg + + if request.vars.pluginfile!=None and not isinstance(request.vars.pluginfile,str): + filename=os.path.basename(request.vars.pluginfile.filename) + if plugin_install(app, request.vars.pluginfile.file, + request, filename): + session.flash = T('new plugin installed') + redirect(URL('design',args=app)) + else: + session.flash = \ + T('unable to create application "%s"', request.vars.filename) + redirect(URL(r=request)) + elif isinstance(request.vars.pluginfile,str): + session.flash = T('plugin not specified') + redirect(URL(r=request)) + + + # If we have only pyc files it means that + # we cannot design + if os.path.exists(apath('%s/compiled' % app, r=request)): + session.flash = \ + T('application is compiled and cannot be designed') + redirect(URL('site')) + + # Get all models + models = listdir(apath('%s/models/' % app, r=request), '.*\.py$') + models=[x.replace('\\','/') for x in models] + defines = {} + for m in models: + data = safe_read(apath('%s/models/%s' % (app, m), r=request)) + defines[m] = regex_tables.findall(data) + defines[m].sort() + + # Get all controllers + controllers = sorted(listdir(apath('%s/controllers/' % app, r=request), '.*\.py$')) + controllers = [x.replace('\\','/') for x in controllers] + functions = {} + for c in controllers: + data = safe_read(apath('%s/controllers/%s' % (app, c), r=request)) + items = regex_expose.findall(data) + functions[c] = items + + # Get all views + views = sorted(listdir(apath('%s/views/' % app, r=request), '[\w/\-]+\.\w+$')) + views = [x.replace('\\','/') for x in views] + extend = {} + include = {} + for c in views: + data = safe_read(apath('%s/views/%s' % (app, c), r=request)) + items = regex_extend.findall(data) + + if items: + extend[c] = items[0][1] + + items = regex_include.findall(data) + include[c] = [i[1] for i in items] + + # Get all modules + modules = listdir(apath('%s/modules/' % app, r=request), '.*\.py$') + modules = modules=[x.replace('\\','/') for x in modules] + modules.sort() + + # Get all static files + statics = listdir(apath('%s/static/' % app, r=request), '[^\.#].*') + statics = [x.replace('\\','/') for x in statics] + statics.sort() + + # Get all languages + languages = listdir(apath('%s/languages/' % app, r=request), '[\w-]*\.py') + + #Get crontab + cronfolder = apath('%s/cron' % app, r=request) + if not os.path.exists(cronfolder): os.mkdir(cronfolder) + crontab = apath('%s/cron/crontab' % app, r=request) + if not os.path.exists(crontab): + safe_write(crontab, '#crontab') + + plugins=[] + def filter_plugins(items,plugins): + plugins+=[item[7:].split('/')[0].split('.')[0] for item in items if item.startswith('plugin_')] + plugins[:]=list(set(plugins)) + plugins.sort() + return [item for item in items if not item.startswith('plugin_')] + + return dict(app=app, + models=filter_plugins(models,plugins), + defines=defines, + controllers=filter_plugins(controllers,plugins), + functions=functions, + views=filter_plugins(views,plugins), + modules=filter_plugins(modules,plugins), + extend=extend, + include=include, + statics=filter_plugins(statics,plugins), + languages=languages, + crontab=crontab, + plugins=plugins) + +def delete_plugin(): + """ Object delete handler """ + app=request.args(0) + plugin = request.args(1) + plugin_name='plugin_'+plugin + if 'nodelete' in request.vars: + redirect(URL('design',args=app)) + elif 'delete' in request.vars: + try: + for folder in ['models','views','controllers','static','modules']: + path=os.path.join(apath(app,r=request),folder) + for item in os.listdir(path): + if item.startswith(plugin_name): + filename=os.path.join(path,item) + if os.path.isdir(filename): + shutil.rmtree(filename) + else: + os.unlink(filename) + session.flash = T('plugin "%(plugin)s" deleted', + dict(plugin=plugin)) + except Exception: + session.flash = T('unable to delete file plugin "%(plugin)s"', + dict(plugin=plugin)) + redirect(URL('design',args=request.args(0))) + return dict(plugin=plugin) + +def plugin(): + """ Application design handler """ + app = get_app() + plugin = request.args(1) + + if not response.flash and app == request.application: + msg = T('ATTENTION: you cannot edit the running application!') + response.flash = msg + + # If we have only pyc files it means that + # we cannot design + if os.path.exists(apath('%s/compiled' % app, r=request)): + session.flash = \ + T('application is compiled and cannot be designed') + redirect(URL('site')) + + # Get all models + models = listdir(apath('%s/models/' % app, r=request), '.*\.py$') + models=[x.replace('\\','/') for x in models] + defines = {} + for m in models: + data = safe_read(apath('%s/models/%s' % (app, m), r=request)) + defines[m] = regex_tables.findall(data) + defines[m].sort() + + # Get all controllers + controllers = sorted(listdir(apath('%s/controllers/' % app, r=request), '.*\.py$')) + controllers = [x.replace('\\','/') for x in controllers] + functions = {} + for c in controllers: + data = safe_read(apath('%s/controllers/%s' % (app, c), r=request)) + items = regex_expose.findall(data) + functions[c] = items + + # Get all views + views = sorted(listdir(apath('%s/views/' % app, r=request), '[\w/\-]+\.\w+$')) + views = [x.replace('\\','/') for x in views] + extend = {} + include = {} + for c in views: + data = safe_read(apath('%s/views/%s' % (app, c), r=request)) + items = regex_extend.findall(data) + if items: + extend[c] = items[0][1] + + items = regex_include.findall(data) + include[c] = [i[1] for i in items] + + # Get all modules + modules = listdir(apath('%s/modules/' % app, r=request), '.*\.py$') + modules = modules=[x.replace('\\','/') for x in modules] + modules.sort() + + # Get all static files + statics = listdir(apath('%s/static/' % app, r=request), '[^\.#].*') + statics = [x.replace('\\','/') for x in statics] + statics.sort() + + # Get all languages + languages = listdir(apath('%s/languages/' % app, r=request), '[\w-]*\.py') + + #Get crontab + crontab = apath('%s/cron/crontab' % app, r=request) + if not os.path.exists(crontab): + safe_write(crontab, '#crontab') + + def filter_plugins(items): + regex=re.compile('^plugin_'+plugin+'(/.*|\..*)?$') + return [item for item in items if regex.match(item)] + + return dict(app=app, + models=filter_plugins(models), + defines=defines, + controllers=filter_plugins(controllers), + functions=functions, + views=filter_plugins(views), + modules=filter_plugins(modules), + extend=extend, + include=include, + statics=filter_plugins(statics), + languages=languages, + crontab=crontab) + + +def create_file(): + """ Create files handler """ + try: + app = get_app(name=request.vars.location.split('/')[0]) + path = apath(request.vars.location, r=request) + filename = re.sub('[^\w./-]+', '_', request.vars.filename) + + if path[-11:] == '/languages/': + # Handle language files + if len(filename) == 0: + raise SyntaxError + if not filename[-3:] == '.py': + filename += '.py' + app = path.split('/')[-3] + path=os.path.join(apath(app, r=request),'languages',filename) + if not os.path.exists(path): + safe_write(path, '') + findT(apath(app, r=request), filename[:-3]) + session.flash = T('language file "%(filename)s" created/updated', + dict(filename=filename)) + redirect(request.vars.sender) + + elif path[-8:] == '/models/': + # Handle python models + if not filename[-3:] == '.py': + filename += '.py' + + if len(filename) == 3: + raise SyntaxError + + text = '# coding: utf8\n' + + elif path[-13:] == '/controllers/': + # Handle python controllers + if not filename[-3:] == '.py': + filename += '.py' + + if len(filename) == 3: + raise SyntaxError + + text = '# coding: utf8\n# %s\ndef index(): return dict(message="hello from %s")' + text = text % (T('try something like'), filename) + + elif path[-7:] == '/views/': + if request.vars.plugin and not filename.startswith('plugin_%s/' % request.vars.plugin): + filename = 'plugin_%s/%s' % (request.vars.plugin, filename) + # Handle template (html) views + if filename.find('.')<0: + filename += '.html' + extension = filename.split('.')[-1].lower() + + if len(filename) == 5: + raise SyntaxError + + msg = T('This is the %(filename)s template', + dict(filename=filename)) + if extension == 'html': + text = dedent(""" + {{extend 'layout.html'}} +

%s

+ {{=BEAUTIFY(response._vars)}}""" % msg) + else: + generic = os.path.join(path,'generic.'+extension) + if os.path.exists(generic): + text = read_file(generic) + else: + text = '' + + elif path[-9:] == '/modules/': + if request.vars.plugin and not filename.startswith('plugin_%s/' % request.vars.plugin): + filename = 'plugin_%s/%s' % (request.vars.plugin, filename) + # Handle python module files + if not filename[-3:] == '.py': + filename += '.py' + + if len(filename) == 3: + raise SyntaxError + + text = dedent(""" + #!/usr/bin/env python + # coding: utf8 + from gluon import *\n""") + + elif path[-8:] == '/static/': + if request.vars.plugin and not filename.startswith('plugin_%s/' % request.vars.plugin): + filename = 'plugin_%s/%s' % (request.vars.plugin, filename) + text = '' + else: + redirect(request.vars.sender) + + full_filename = os.path.join(path, filename) + dirpath = os.path.dirname(full_filename) + + if not os.path.exists(dirpath): + os.makedirs(dirpath) + + if os.path.exists(full_filename): + raise SyntaxError + + safe_write(full_filename, text) + session.flash = T('file "%(filename)s" created', + dict(filename=full_filename[len(path):])) + redirect(URL('edit', + args=[os.path.join(request.vars.location, filename)])) + except Exception, e: + if not isinstance(e,HTTP): + session.flash = T('cannot create file') + + redirect(request.vars.sender) + + +def upload_file(): + """ File uploading handler """ + + try: + filename = None + app = get_app(name=request.vars.location.split('/')[0]) + path = apath(request.vars.location, r=request) + + if request.vars.filename: + filename = re.sub('[^\w\./]+', '_', request.vars.filename) + else: + filename = os.path.split(request.vars.file.filename)[-1] + + if path[-8:] == '/models/' and not filename[-3:] == '.py': + filename += '.py' + + if path[-9:] == '/modules/' and not filename[-3:] == '.py': + filename += '.py' + + if path[-13:] == '/controllers/' and not filename[-3:] == '.py': + filename += '.py' + + if path[-7:] == '/views/' and not filename[-5:] == '.html': + filename += '.html' + + if path[-11:] == '/languages/' and not filename[-3:] == '.py': + filename += '.py' + + filename = os.path.join(path, filename) + dirpath = os.path.dirname(filename) + + if not os.path.exists(dirpath): + os.makedirs(dirpath) + + safe_write(filename, request.vars.file.file.read(), 'wb') + session.flash = T('file "%(filename)s" uploaded', + dict(filename=filename[len(path):])) + except Exception: + if filename: + d = dict(filename = filename[len(path):]) + else: + d = dict(filename = 'unkown') + session.flash = T('cannot upload file "%(filename)s"', d) + + redirect(request.vars.sender) + + +def errors(): + """ Error handler """ + import operator + import os + import pickle + import hashlib + + app = get_app() + + method = request.args(1) or 'new' + + + if method == 'new': + errors_path = apath('%s/errors' % app, r=request) + + delete_hashes = [] + for item in request.vars: + if item[:7] == 'delete_': + delete_hashes.append(item[7:]) + + hash2error = dict() + + for fn in listdir(errors_path, '^\w.*'): + fullpath = os.path.join(errors_path, fn) + if not os.path.isfile(fullpath): continue + try: + fullpath_file = open(fullpath, 'r') + try: + error = pickle.load(fullpath_file) + finally: + fullpath_file.close() + except IOError: + continue + + hash = hashlib.md5(error['traceback']).hexdigest() + + if hash in delete_hashes: + os.unlink(fullpath) + else: + try: + hash2error[hash]['count'] += 1 + except KeyError: + error_lines = error['traceback'].split("\n") + last_line = error_lines[-2] + error_causer = os.path.split(error['layer'])[1] + hash2error[hash] = dict(count=1, pickel=error, + causer=error_causer, + last_line=last_line, + hash=hash,ticket=fn) + + decorated = [(x['count'], x) for x in hash2error.values()] + decorated.sort(key=operator.itemgetter(0), reverse=True) + + return dict(errors = [x[1] for x in decorated], app=app, method=method) + else: + for item in request.vars: + if item[:7] == 'delete_': + os.unlink(apath('%s/errors/%s' % (app, item[7:]), r=request)) + func = lambda p: os.stat(apath('%s/errors/%s' % \ + (app, p), r=request)).st_mtime + tickets = sorted(listdir(apath('%s/errors/' % app, r=request), '^\w.*'), + key=func, + reverse=True) + + return dict(app=app, tickets=tickets, method=method) + + +def make_link(path): + """ Create a link from a path """ + tryFile = path.replace('\\', '/') + + if os.path.isabs(tryFile) and os.path.isfile(tryFile): + (folder, filename) = os.path.split(tryFile) + (base, ext) = os.path.splitext(filename) + app = get_app() + + editable = {'controllers': '.py', 'models': '.py', 'views': '.html'} + for key in editable.keys(): + check_extension = folder.endswith("%s/%s" % (app,key)) + if ext.lower() == editable[key] and check_extension: + return A('"' + tryFile + '"', + _href=URL(r=request, + f='edit/%s/%s/%s' % (app, key, filename))).xml() + return '' + + +def make_links(traceback): + """ Make links using the given traceback """ + + lwords = traceback.split('"') + + # Making the short circuit compatible with <= python2.4 + result = (len(lwords) != 0) and lwords[0] or '' + + i = 1 + + while i < len(lwords): + link = make_link(lwords[i]) + + if link == '': + result += '"' + lwords[i] + else: + result += link + + if i + 1 < len(lwords): + result += lwords[i + 1] + i = i + 1 + + i = i + 1 + + return result + + +class TRACEBACK(object): + """ Generate the traceback """ + + def __init__(self, text): + """ TRACEBACK constructor """ + + self.s = make_links(CODE(text).xml()) + + def xml(self): + """ Returns the xml """ + + return self.s + + +def ticket(): + """ Ticket handler """ + + if len(request.args) != 2: + session.flash = T('invalid ticket') + redirect(URL('site')) + + app = get_app() + myversion = request.env.web2py_version + ticket = request.args[1] + e = RestrictedError() + e.load(request, app, ticket) + + return dict(app=app, + ticket=ticket, + output=e.output, + traceback=(e.traceback and TRACEBACK(e.traceback)), + snapshot=e.snapshot, + code=e.code, + layer=e.layer, + myversion=myversion) + +def error(): + """ Generate a ticket (for testing) """ + raise RuntimeError('admin ticket generator at your service') + +def update_languages(): + """ Update available languages """ + + app = get_app() + update_all_languages(apath(app, r=request)) + session.flash = T('Language files (static strings) updated') + redirect(URL('design',args=app)) + +def twitter(): + session.forget() + session._unlock(response) + import gluon.tools + import gluon.contrib.simplejson as sj + try: + if TWITTER_HASH: + page = gluon.tools.fetch('http://twitter.com/%s?format=json'%TWITTER_HASH) + return sj.loads(page)['#timeline'] + else: + return 'disabled' + except Exception, e: + return DIV(T('Unable to download because:'),BR(),str(e)) + +def user(): + if MULTI_USER_MODE: + if not db(db.auth_user).count(): + auth.settings.registration_requires_approval = False + return dict(form=auth()) + else: + return dict(form=T("Disabled")) + +def reload_routes(): + """ Reload routes.py """ + gluon.rewrite.load() + redirect(URL('site')) ADDED applications/admin/controllers/gae.py Index: applications/admin/controllers/gae.py ================================================================== --- /dev/null +++ applications/admin/controllers/gae.py @@ -0,0 +1,87 @@ +### this works on linux only + +import re +try: + import fcntl + import subprocess + import signal + import os + import shutil + from gluon.fileutils import read_file, write_file +except: + session.flash='sorry, only on Unix systems' + redirect(URL(request.application,'default','site')) + +forever=10**8 + +def kill(): + p = cache.ram('gae_upload',lambda:None,forever) + if not p or p.poll()!=None: + return 'oops' + os.kill(p.pid, signal.SIGKILL) + cache.ram('gae_upload',lambda:None,-1) + +class EXISTS(object): + def __init__(self, error_message='file not found'): + self.error_message = error_message + def __call__(self, value): + if os.path.exists(value): + return (value,None) + return (value,self.error_message) + +def deploy(): + regex = re.compile('^\w+$') + apps = sorted(file for file in os.listdir(apath(r=request)) if regex.match(file)) + form = SQLFORM.factory( + Field('appcfg',default=GAE_APPCFG,label='Path to appcfg.py', + requires=EXISTS(error_message=T('file not found'))), + Field('google_application_id',requires=IS_ALPHANUMERIC()), + Field('applications','list:string', + requires=IS_IN_SET(apps,multiple=True), + label=T('web2py apps to deploy')), + Field('email',requires=IS_EMAIL(),label=T('GAE Email')), + Field('password','password',requires=IS_NOT_EMPTY(),label=T('GAE Password'))) + cmd = output = errors= "" + if form.accepts(request,session): + try: + kill() + except: + pass + ignore_apps = [item for item in apps \ + if not item in form.vars.applications] + regex = re.compile('\(applications/\(.*') + yaml = apath('../app.yaml', r=request) + if not os.path.exists(yaml): + example = apath('../app.example.yaml', r=request) + shutil.copyfile(example,yaml) + data = read_file(yaml) + data = re.sub('application:.*','application: %s' % form.vars.google_application_id,data) + data = regex.sub('(applications/(%s)/.*)|' % '|'.join(ignore_apps),data) + write_file(yaml, data) + + path = request.env.applications_parent + cmd = '%s --email=%s --passin update %s' % \ + (form.vars.appcfg, form.vars.email, path) + p = cache.ram('gae_upload', + lambda s=subprocess,c=cmd:s.Popen(c, shell=True, + stdin=s.PIPE, + stdout=s.PIPE, + stderr=s.PIPE, close_fds=True),-1) + p.stdin.write(form.vars.password+'\n') + fcntl.fcntl(p.stdout.fileno(), fcntl.F_SETFL, os.O_NONBLOCK) + fcntl.fcntl(p.stderr.fileno(), fcntl.F_SETFL, os.O_NONBLOCK) + return dict(form=form,command=cmd) + +def callback(): + p = cache.ram('gae_upload',lambda:None,forever) + if not p or p.poll()!=None: + return '' + try: + output = p.stdout.read() + except: + output='' + try: + errors = p.stderr.read() + except: + errors='' + return (output+errors).replace('\n','
') ADDED applications/admin/controllers/mercurial.py Index: applications/admin/controllers/mercurial.py ================================================================== --- /dev/null +++ applications/admin/controllers/mercurial.py @@ -0,0 +1,82 @@ +from gluon.fileutils import read_file, write_file + +if DEMO_MODE or MULTI_USER_MODE: + session.flash = T('disabled in demo mode') + redirect(URL('default','site')) +if not have_mercurial: + session.flash=T("Sorry, could not find mercurial installed") + redirect(URL('default','design',args=request.args(0))) + +_hgignore_content = """\ +syntax: glob +*~ +*.pyc +*.pyo +*.bak +*.bak2 +cache/* +private/* +uploads/* +databases/* +sessions/* +errors/* +""" + +def hg_repo(path): + import os + uio = ui.ui() + uio.quiet = True + if not os.environ.get('HGUSER') and not uio.config("ui", "username"): + os.environ['HGUSER'] = 'web2py@localhost' + try: + repo = hg.repository(ui=uio, path=path) + except: + repo = hg.repository(ui=uio, path=path, create=True) + hgignore = os.path.join(path, '.hgignore') + if not os.path.exists(hgignore): + write_file(hgignore, _hgignore_content) + return repo + +def commit(): + app = request.args(0) + path = apath(app, r=request) + repo = hg_repo(path) + form = FORM('Comment:',INPUT(_name='comment',requires=IS_NOT_EMPTY()), + INPUT(_type='submit',_value='Commit')) + if form.accepts(request.vars,session): + oldid = repo[repo.lookup('.')] + cmdutil.addremove(repo) + repo.commit(text=form.vars.comment) + if repo[repo.lookup('.')] == oldid: + response.flash = 'no changes' + try: + files = TABLE(*[TR(file) for file in repo[repo.lookup('.')].files()]) + changes = TABLE(TR(TH('revision'),TH('description'))) + for change in repo.changelog: + ctx=repo.changectx(change) + revision, description = ctx.rev(), ctx.description() + changes.append(TR(A(revision,_href=URL('revision', + args=(app,revision))), + description)) + except: + files = [] + changes = [] + return dict(form=form,files=files,changes=changes,repo=repo) + +def revision(): + app = request.args(0) + path = apath(app, r=request) + repo = hg_repo(path) + revision = request.args(1) + ctx=repo.changectx(revision) + form=FORM(INPUT(_type='submit',_value='revert')) + if form.accepts(request.vars): + hg.update(repo, revision) + session.flash = "reverted to revision %s" % ctx.rev() + redirect(URL('default','design',args=app)) + return dict( + files=ctx.files(), + rev=str(ctx.rev()), + desc=ctx.description(), + form=form + ) ADDED applications/admin/controllers/shell.py Index: applications/admin/controllers/shell.py ================================================================== --- /dev/null +++ applications/admin/controllers/shell.py @@ -0,0 +1,45 @@ +import sys +import cStringIO +import gluon.contrib.shell +import code, thread +from gluon.shell import env + +if DEMO_MODE or MULTI_USER_MODE: + session.flash = T('disabled in demo mode') + redirect(URL('default','site')) + +FE=10**9 + +def index(): + app = request.args(0) or 'admin' + reset() + return dict(app=app) + +def callback(): + app = request.args[0] + command = request.vars.statement + escape = command[:1]!='!' + history = session['history:'+app] = session.get('history:'+app,gluon.contrib.shell.History()) + if not escape: + command = command[1:] + if command == '%reset': + reset() + return '*** reset ***' + elif command[0] == '%': + try: + command=session['commands:'+app][int(command[1:])] + except ValueError: + return '' + session['commands:'+app].append(command) + environ=env(app,True) + output = gluon.contrib.shell.run(history,command,environ) + k = len(session['commands:'+app]) - 1 + #output = PRE(output) + #return TABLE(TR('In[%i]:'%k,PRE(command)),TR('Out[%i]:'%k,output)) + return 'In [%i] : %s%s\n' % (k + 1, command, output) + +def reset(): + app = request.args(0) or 'admin' + session['commands:'+app] = [] + session['history:'+app] = gluon.contrib.shell.History() + return 'done' ADDED applications/admin/controllers/toolbar.py Index: applications/admin/controllers/toolbar.py ================================================================== --- /dev/null +++ applications/admin/controllers/toolbar.py @@ -0,0 +1,29 @@ +import os +from gluon.settings import global_settings, read_file +# + +def index(): + app = request.args(0) + return dict(app=app) + +def profiler(): + """ + to use the profiler start web2py with -F profiler.log + """ + KEY = 'web2py_profiler_size' + filename = global_settings.cmd_options.profiler_filename + data = 'profiler disabled' + if filename: + if KEY in request.cookies: + size = int(request.cookies[KEY].value) + else: + size = 0 + if os.path.exists(filename): + data = read_file('profiler.log','rb') + if size=m: redirect(URL('step2')) + table=session.app['tables'][n] + form=SQLFORM.factory(Field('field_names','list:string', + default=session.app.get('table_'+table,[]))) + if form.accepts(request.vars) and form.vars.field_names: + fields=listify(form.vars.field_names) + if table=='auth_user': + for field in ['first_name','last_name','username','email','password']: + if not field in fields: + fields.append(field) + session.app['table_'+table]=[t.strip().lower() + for t in listify(form.vars.field_names) + if t.strip()] + try: + tables=sort_tables(session.app['tables']) + except RuntimeError: + response.flash=T('invalid circual reference') + else: + if n=m: redirect(URL('step4')) + page=session.app['pages'][n] + markmin_url='http://web2py.com/examples/static/markmin.html' + form=SQLFORM.factory(Field('content','text', + default=session.app.get('page_'+page,[]), + comment=A('use markmin',_href=markmin_url,_target='_blank')), + formstyle='table2cols') + if form.accepts(request.vars): + session.app['page_'+page]=form.vars.content + if n 0 +FONT_SIZE = 10 + +# Displays the editor in full screen mode. The value must be 'true' or 'false' +FULL_SCREEN = 'false' + +# Display a check box under the editor to allow the user to switch +# between the editor and a simple +# HTML text area. The value must be 'true' or 'false' +ALLOW_TOGGLE = 'true' + +# Replaces tab characters with space characters. +# The value can be 'false' (meaning that tabs are not replaced), +# or an integer > 0 that specifies the number of spaces to replace a tab with. +REPLACE_TAB_BY_SPACES = 4 + +# Toggle on/off the code editor instead of textarea on startup +DISPLAY = "onload" or "later" + +# if demo mode is True then admin works readonly and does not require login +DEMO_MODE = False + +# if visible_apps is not empty only listed apps will be accessible +FILTER_APPS = [] + +# To upload on google app engine this has to point to the proper appengine +# config file +import os +# extract google_appengine_x.x.x.zip to web2py root directory +#GAE_APPCFG = os.path.abspath(os.path.join('appcfg.py')) +# extract google_appengine_x.x.x.zip to applications/admin/private/ +GAE_APPCFG = os.path.abspath(os.path.join('/usr/local/bin/appcfg.py')) + +# To use web2py as a teaching tool, set MULTI_USER_MODE to True +MULTI_USER_MODE = False + +# configurable twitterbox, set to None/False to suppress +TWITTER_HASH = "web2py" + +# parameter for downloading LAYOUTS +LAYOUTS_APP = 'http://web2py.com/layouts' +#LAYOUTS_APP = 'http://127.0.0.1:8000/layouts' + + +# parameter for downloading PLUGINS +PLUGINS_APP = 'http://web2py.com/plugins' +#PLUGINS_APP = 'http://127.0.0.1:8000/plugins' + +# set the language +if 'adminLanguage' in request.cookies and not (request.cookies['adminLanguage'] is None): + T.force(request.cookies['adminLanguage'].value) ADDED applications/admin/models/0_imports.py Index: applications/admin/models/0_imports.py ================================================================== --- /dev/null +++ applications/admin/models/0_imports.py @@ -0,0 +1,26 @@ +import time +import os +import sys +import re +import urllib +import cgi +import difflib +import shutil +import stat +import socket + +from textwrap import dedent + +try: + from mercurial import ui, hg, cmdutil + have_mercurial = True +except ImportError: + have_mercurial = False + +from gluon.utils import md5_hash +from gluon.fileutils import listdir, cleanpath, up +from gluon.fileutils import tar, tar_compiled, untar, fix_newlines +from gluon.languages import findT, update_all_languages +from gluon.myregex import * +from gluon.restricted import * +from gluon.compileapp import compile_application, remove_compiled_application ADDED applications/admin/models/access.py Index: applications/admin/models/access.py ================================================================== --- /dev/null +++ applications/admin/models/access.py @@ -0,0 +1,146 @@ +import os, time +from gluon import portalocker +from gluon.admin import apath +from gluon.fileutils import read_file +# ########################################################### +# ## make sure administrator is on localhost or https +# ########################################################### + +http_host = request.env.http_host.split(':')[0] + +if request.env.web2py_runtime_gae: + session_db = DAL('gae') + session.connect(request, response, db=session_db) + hosts = (http_host, ) + +if request.env.http_x_forwarded_for or request.is_https: + session.secure() +elif not request.is_local and not DEMO_MODE: + raise HTTP(200, T('Admin is disabled because insecure channel')) + +try: + _config = {} + port = int(request.env.server_port or 0) + restricted(read_file(apath('../parameters_%i.py' % port, request)), _config) + + if not 'password' in _config or not _config['password']: + raise HTTP(200, T('admin disabled because no admin password')) +except IOError: + import gluon.fileutils + if request.env.web2py_runtime_gae: + if gluon.fileutils.check_credentials(request): + session.authorized = True + session.last_time = time.time() + else: + raise HTTP(200, + T('admin disabled because not supported on google app engine')) + else: + raise HTTP(200, T('admin disabled because unable to access password file')) + + +def verify_password(password): + session.pam_user = None + if DEMO_MODE: + return True + elif not 'password' in _config: + return False + elif _config['password'].startswith('pam_user:'): + session.pam_user = _config['password'][9:].strip() + import gluon.contrib.pam + return gluon.contrib.pam.authenticate(session.pam_user,password) + else: + return _config['password'] == CRYPT()(password)[0] + + +# ########################################################### +# ## handle brute-force login attacks +# ########################################################### + +deny_file = os.path.join(request.folder, 'private', 'hosts.deny') +allowed_number_of_attempts = 5 +expiration_failed_logins = 3600 + +def read_hosts_deny(): + import datetime + hosts = {} + if os.path.exists(deny_file): + hosts = {} + f = open(deny_file, 'r') + portalocker.lock(f, portalocker.LOCK_SH) + for line in f.readlines(): + if not line.strip() or line.startswith('#'): + continue + fields = line.strip().split() + if len(fields) > 2: + hosts[fields[0].strip()] = ( # ip + int(fields[1].strip()), # n attemps + int(fields[2].strip()) # last attempts + ) + portalocker.unlock(f) + f.close() + return hosts + +def write_hosts_deny(denied_hosts): + f = open(deny_file, 'w') + portalocker.lock(f, portalocker.LOCK_EX) + for key, val in denied_hosts.items(): + if time.time()-val[1] < expiration_failed_logins: + line = '%s %s %s\n' % (key, val[0], val[1]) + f.write(line) + portalocker.unlock(f) + f.close() + +def login_record(success=True): + denied_hosts = read_hosts_deny() + val = (0,0) + if success and request.client in denied_hosts: + del denied_hosts[request.client] + elif not success and not request.is_local: + val = denied_hosts.get(request.client,(0,0)) + if time.time()-val[1]= allowed_number_of_attempts: + return val[0] # locked out + time.sleep(2**val[0]) + val = (val[0]+1,int(time.time())) + denied_hosts[request.client] = val + write_hosts_deny(denied_hosts) + return val[0] + + +# ########################################################### +# ## session expiration +# ########################################################### + +t0 = time.time() +if session.authorized: + + if session.last_time and session.last_time < t0 - EXPIRATION: + session.flash = T('session expired') + session.authorized = False + else: + session.last_time = t0 + +if not session.authorized and not \ + (request.controller == 'default' and \ + request.function in ('index','user')): + + if request.env.query_string: + query_string = '?' + request.env.query_string + else: + query_string = '' + + if request.env.web2py_original_uri: + url = request.env.web2py_original_uri + else: + url = request.env.path_info + query_string + redirect(URL(request.application, 'default', 'index', vars=dict(send=url))) +elif session.authorized and \ + request.controller == 'default' and \ + request.function == 'index': + redirect(URL(request.application, 'default', 'site')) + + +if request.controller=='appadmin' and DEMO_MODE: + session.flash = 'Appadmin disabled in demo mode' + redirect(URL('default','sites')) + ADDED applications/admin/models/buttons.py Index: applications/admin/models/buttons.py ================================================================== --- /dev/null +++ applications/admin/models/buttons.py @@ -0,0 +1,15 @@ +# Template helpers + +import os + +def button(href, label): + return A(SPAN(label),_class='button',_href=href) + +def sp_button(href, label): + return A(SPAN(label),_class='button special',_href=href) + +def helpicon(): + return IMG(_src=URL('static', 'images/help.png'), _alt='help') + +def searchbox(elementid): + return TAG[''](LABEL(IMG(_src=URL('static', 'images/search.png'), _alt=T('filter')), _class='icon', _for=elementid), ' ', INPUT(_id=elementid, _type='text', _size=12)) ADDED applications/admin/models/db.py Index: applications/admin/models/db.py ================================================================== --- /dev/null +++ applications/admin/models/db.py @@ -0,0 +1,40 @@ +# -*- coding: utf-8 -*- +# this file is released under public domain and you can use without limitations + +if MULTI_USER_MODE: + db = DAL('sqlite://storage.sqlite') # if not, use SQLite or other DB + from gluon.tools import * + mail = Mail() # mailer + auth = Auth(globals(),db) # authentication/authorization + crud = Crud(globals(),db) # for CRUD helpers using auth + service = Service(globals()) # for json, xml, jsonrpc, xmlrpc, amfrpc + plugins = PluginManager() + + mail.settings.server = 'logging' or 'smtp.gmail.com:587' # your SMTP server + mail.settings.sender = 'you@gmail.com' # your email + mail.settings.login = 'username:password' # your credentials or None + + auth.settings.hmac_key = '' # before define_tables() + auth.define_tables() # creates all needed tables + auth.settings.mailer = mail # for user email verification + auth.settings.registration_requires_verification = False + auth.settings.registration_requires_approval = True + auth.messages.verify_email = 'Click on the link http://'+request.env.http_host+URL('default','user',args=['verify_email'])+'/%(key)s to verify your email' + auth.settings.reset_password_requires_verification = True + auth.messages.reset_password = 'Click on the link http://'+request.env.http_host+URL('default','user',args=['reset_password'])+'/%(key)s to reset your password' + + db.define_table('app',Field('name'),Field('owner',db.auth_user)) + +if not session.authorized and MULTI_USER_MODE: + if auth.user and not request.function=='user': + session.authorized = True + elif not request.function=='user': + redirect(URL('default','user/login')) + +def is_manager(): + if not MULTI_USER_MODE: + return True + elif auth.user and auth.user.id==1: + return True + else: + return False ADDED applications/admin/models/menu.py Index: applications/admin/models/menu.py ================================================================== --- /dev/null +++ applications/admin/models/menu.py @@ -0,0 +1,32 @@ +# ########################################################### +# ## generate menu +# ########################################################### + +_a = request.application +_c = request.controller +_f = request.function +response.title = '%s %s' % (_f, '/'.join(request.args)) +response.subtitle = 'admin' +response.menu = [(T('site'), _f == 'site', URL(_a,'default','site'))] + +if request.args: + _t = request.args[0] + response.menu.append((T('edit'), _c == 'default' and _f == 'design', + URL(_a,'default','design',args=_t))) + response.menu.append((T('about'), _c == 'default' and _f == 'about', + URL(_a,'default','about',args=_t))) + response.menu.append((T('errors'), _c == 'default' and _f == 'errors', + URL(_a,'default','errors',args=_t))) + + response.menu.append((T('versioning'), + _c == 'mercurial' and _f == 'commit', + URL(_a,'mercurial','commit',args=_t))) + +if not session.authorized: + response.menu = [(T('login'), True, '')] +else: + response.menu.append((T('logout'), False, + URL(_a,'default',f='logout'))) + +response.menu.append((T('help'), False, URL('examples','default','index'))) + ADDED applications/admin/models/plugin_multiselect.py Index: applications/admin/models/plugin_multiselect.py ================================================================== --- /dev/null +++ applications/admin/models/plugin_multiselect.py @@ -0,0 +1,4 @@ +response.files.append(URL('static','plugin_multiselect/jquery.dimensions.js')) +response.files.append(URL('static','plugin_multiselect/jquery.multiselect.js')) +response.files.append(URL('static','plugin_multiselect/jquery.multiselect.css')) +response.files.append(URL('static','plugin_multiselect/start.js')) ADDED applications/admin/modules/__init__.py Index: applications/admin/modules/__init__.py ================================================================== --- /dev/null +++ applications/admin/modules/__init__.py ADDED applications/admin/static/css/calendar.css Index: applications/admin/static/css/calendar.css ================================================================== --- /dev/null +++ applications/admin/static/css/calendar.css @@ -0,0 +1,4 @@ +.calendar{z-index:99;position:relative;display:none;border-top:2px solid #fff;border-right:2px solid #000;border-bottom:2px solid #000;border-left:2px solid #fff;font-size:11px;color:#000;cursor:default;background:#d4d0c8;font-family:tahoma,verdana,sans-serif;}.calendar table{border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;font-size:11px;color:#000;cursor:default;background:#d4d0c8;font-family:tahoma,verdana,sans-serif;}.calendar .button{text-align:center;padding:1px;border-top:1px solid #fff;border-right:1px solid #000;border-bottom:1px solid #000;border-left:1px solid #fff;}.calendar .nav{background:transparent}.calendar thead .title{font-weight:bold;padding:1px;border:1px solid #000;background:#848078;color:#fff;text-align:center;}.calendar thead .name{border-bottom:1px solid #000;padding:2px;text-align:center;background:#f4f0e8;}.calendar thead .weekend{color:#f00;}.calendar thead .hilite{border-top:2px solid #fff;border-right:2px solid #000;border-bottom:2px solid #000;border-left:2px solid #fff;padding:0;background-color:#e4e0d8;}.calendar thead .active{padding:2px 0 0 2px;border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;background-color:#c4c0b8;}.calendar tbody .day{width:2em;text-align:right;padding:2px 4px 2px 2px;}.calendar tbody .day.othermonth{font-size:80%;color:#aaa;}.calendar tbody .day.othermonth.oweekend{color:#faa;}.calendar table .wn{padding:2px 3px 2px 2px;border-right:1px solid #000;background:#f4f0e8;}.calendar tbody .rowhilite td{background:#e4e0d8;}.calendar tbody .rowhilite td.wn{background:#d4d0c8;}.calendar tbody td.hilite{padding:1px 3px 1px 1px;border-top:1px solid #fff;border-right:1px solid #000;border-bottom:1px solid #000;border-left:1px solid #fff;}.calendar tbody td.active{padding:2px 2px 0 2px;border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;}.calendar tbody td.selected{font-weight:bold;border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;padding:2px 2px 0 2px;background:#e4e0d8;}.calendar tbody td.weekend{color:#f00;}.calendar tbody td.today{font-weight:bold;color:#00f;}.calendar tbody .disabled{color:#999;}.calendar tbody .emptycell{visibility:hidden;}.calendar tbody .emptyrow{display:none;}.calendar tfoot .ttip{background:#f4f0e8;padding:1px;border:1px solid #000;background:#848078;color:#fff;text-align:center;}.calendar tfoot .hilite{border-top:1px solid #fff;border-right:1px solid #000;border-bottom:1px solid #000;border-left:1px solid #fff;padding:1px;background:#e4e0d8;}.calendar tfoot .active{padding:2px 0 0 2px;border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;}.calendar .combo{position:absolute;display:none;width:4em;top:0;left:0;cursor:default;border-top:1px solid #fff;border-right:1px solid #000;border-bottom:1px solid #000;border-left:1px solid #fff;background:#e4e0d8;font-size:90%;padding:1px;z-index:100;}.calendar .combo .label,.calendar .combo .label-IEfix{text-align:center;padding:1px;}.calendar .combo .label-IEfix{width:4em;}.calendar .combo .active{background:#c4c0b8;padding:0;border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;}.calendar .combo .hilite{background:#048;color:#fea;}.calendar td.time{border-top:1px solid #000;padding:1px 0;text-align:center;background-color:#f4f0e8;}.calendar td.time .hour,.calendar td.time .minute,.calendar td.time .ampm{padding:0 3px 0 4px;border:1px solid #889;font-weight:bold;background-color:#fff;}.calendar td.time .ampm{text-align:center;}.calendar td.time .colon{padding:0 2px 0 3px;font-weight:bold;}.calendar td.time span.hilite{border-color:#000;background-color:#766;color:#fff;}.calendar td.time span.active{border-color:#f00;background-color:#000;color:#0f0;} + +#CP_hourcont {z-index:99;padding: 0px;position:absolute;border:1px dashed #bbbbbb;background-color:#dddddd;display:none;} #CP_minutecont {z-index:99;background-color:#dddddd;padding: 0px;position:absolute;width:45px;border: 1px dashed #cccccc;display:none;} .floatleft {float:left;} .CP_hour {z-index:99;padding:1px;font-family: Arial, Helvetica, sans-serif;font-size:9px;white-space:nowrap;cursor:pointer;width:35px;margin:1px;background-color:#eeeeee;} .CP_minute {z-index:99;padding:1px;background-color:#eeeeee;font-family: Arial, Helvetica, sans-serif;font-size:9px;white-space:nowrap;cursor:pointer;width:auto;margin:1px;} .CP_over {z-index:99;background-color:#ffffff;} + ADDED applications/admin/static/css/jqueryMultiSelect.css Index: applications/admin/static/css/jqueryMultiSelect.css ================================================================== --- /dev/null +++ applications/admin/static/css/jqueryMultiSelect.css @@ -0,0 +1,47 @@ +.multiSelect { + width: 200px; + border: solid 1px #BBB; + background: #FFF right center no-repeat; + padding: 2px 4px; + padding-right: 20px; + display: inline; +} + +.multiSelect.hover { + background: right center no-repeat; +} + +.multiSelect.active, +.multiSelect.focus { + border: inset 1px #000; +} + +.multiSelect.active { + background: right center no-repeat; +} + +.multiSelectOptions { + width: 500px; + max-height: 150px; + margin-top: -1px; + overflow: auto; + border: solid 1px #B2B2B2; + background: #FFF; +} + +.multiSelectOptions LABEL { + padding: 2px 5px; + display: block; +} + +.multiSelectOptions LABEL.checked { + background: #E6E6E6; +} + +.multiSelectOptions LABEL.selectAll { + border-bottom: dotted 1px #CCC; +} + +.multiSelectOptions LABEL.hover { + background: #CFCFCF; +} ADDED applications/admin/static/css/styles.css Index: applications/admin/static/css/styles.css ================================================================== --- /dev/null +++ applications/admin/static/css/styles.css @@ -0,0 +1,1065 @@ +/** +* cSans v0.6.3 +* 2009 Copyright A navalla suíza http://anavallasuiza.com +* cSans is released under the GNU Affero GPL version 3 - more information at http://www.fsf.org/licensing/licenses/agpl-3.0.html +*/ + +/* 1. RESET */ +html,body,div,span,object,iframe, +h1,h2,h3,h4,h5,h6,p,blockquote,pre, +a,abbr,acronym,address,code, +del,dfn,em,img,q,dl,dt,dd,ol,ul,li, +fieldset,form,label,legend,textarea, +table,caption,tbody,tfoot,thead,tr,th,td { + margin:0; + padding:0; + border:0; +} +textarea,select,input { font-size:1em; } +html,body { height:100%; } +body { + font-family:Arial,Helvetica,"Liberation Sans",Sans,sans-serif; + font-size: 12pt; + line-height:1.25em; + text-align:center; + background:#fff; + color:#000; +} +.page,.expanded-page { text-align:left; } + +/* 2. DEBUG: Show borders to stress an element */ +.omg-red,.omg-yellow,.omg-blue,.omg-green,.omg-black,.omg-white { + border-top:dotted 3px; + border-bottom:dotted 3px; +} +.omg-red { border-color:red; } +.omg-yellow { border-color:yellow; } +.omg-blue { border-color:blue; } +.omg-green { border-color:green; } +.omg-black { border-color:black; } +.omg-white { border-color:white; } + +/* 3. BASIC STYLES */ +/* 3.1. Titles */ +h1,h2,h3,h4,h5,h6 { + font-weight:bold; + line-height:1em; + margin:1em 0 0.5em 0; +} +h1 { font-size:2em; } +h2 { font-size:1.75em; } +h3 { font-size:1.5em; } +h4 { font-size:1.125em; } +h5 { font-size:1em; } +h6 { font-size:1em; font-weight:normal; } + +/* 3.2. Lists */ +ul,dd { margin-left:1em; } +ol { list-style-type:decimal; margin-left:1.5em; } +dl dt { font-weight:bold; } + +/* 3.3. Tables */ +table { border-collapse:collapse; border-spacing:0; } +caption,th { font-weight:bold; } +th,td { text-align:left; padding:0; border:1px solid #ccc; } +tfoot { font-style:italic; } + +/* 3.4. Images */ +a img { border:none; } +img.right { margin-left:1em; } +img.left { margin-right:1em; } + +/* 3.5. Forms */ +fieldset { border:1px solid #ccc; } +legend { font-weight:bold; font-size:1.2em; } +input { margin:0; } +input.text,input.password { overflow-y:visible; } +textarea { width:400px; height:100px; border:1px solid #ccc; overflow-y: auto; } +select { margin:0; font-size:1em; } +input,textarea,select { font-family:Arial,sans-serif; font-size: 1em; } + +/* 3.6. Monospace elements */ +pre,code,tt { font-family:"Courier New", Courier, monospace; line-height:1.5; } +pre,code { white-space:pre; } +tt { display:block; line-height:1.5; } + +/* 3.7. Block elements */ +p,form,table,address,blockquote,pre,code,tt,ul,ol,dl { margin-bottom:1em; } + +/* 3.8. Inline elements */ +em,dfn { font-style:italic; } + +/* 3.9. HR element */ +hr { + background:none; + visibility:hidden; + clear:both; + float:none; + width:100%; + height:1px; + border:none; + margin:-1px 0; +} + +/* 3.10. Flash objects */ +object { outline:none; } + +/* 4. UTILS */ +/* 4.1. Images with link and without link must overwrite background, width and height properties in your css */ +.image a,.image li,.image { + background-repeat:no-repeat; + background-color:transparent; + margin:0; + padding:0; + outline:none; + font-size:0px !important; + line-height:0em !important; + letter-spacing:-20px; + text-indent: -2px; + display:block; + overflow:hidden; + text-align:left; + border: none; +} +.image a { + display:block; + width:100%; + height:100%; + height:inherit; +} +ol.image,ul.image { + background:none; + width:100%; + height:auto; + float:left; +} +.image li { + float:left; +} +span.image,strong.image,em.image,a.image { + display:inline-block; + vertical-align:bottom; +} +input.image { cursor:pointer; } + +/* 4.2. Simple tabs system. You can overwrite background and text styles */ +.tabs { + list-style:none; + padding:0; + margin:0; + float:left; + width:100%; +} +.tabs li { + float:left; + margin:0 1px 0 0; +} +.tabs li span, +.tabs li a { + float: left; + padding:2px 5px; + white-space:nowrap; + text-align:center; + cursor:pointer; + outline:0; + text-decoration:none; +} +.tabs li span { cursor:default; } +.tabs .select a,.tabs a:hover { + background:#ddd; +} + +/* 4.3. Convert a block element (like a fieldset) into a inline element */ +.inline { + border:none; + margin:0; + padding:0; + display:inline; +} +fieldset.inline { + display:block; + float:left; + width: 100%; +} + +/* 4.4. Inline-block element must content any element inside (div, p, etc) for the correct visualization in FF<3 */ +.inline-block-top,.inline-block-middle,.inline-block-bottom { + float:none !important; + display:inline-block; +} +.inline-block-top { vertical-align:top !important; } +.inline-block-middle { vertical-align:middle !important; } +.inline-block-bottom { vertical-align:bottom !important; } + +/* 4.5. Float elements */ +.left { float:left !important; } +.right,.right-right { float:right !important; } +.right-right { text-align:right !important; } +.right-full { width:100%; text-align:right !important; } + +/* 4.6. Clear */ +.clear,.content,.page,.expanded-page { display:block; } +.clear:after,.tabs:after,.content:after,.page:after,.expanded-page:after { + content:" "; + display:block; + height:0; + clear:both; + visibility:hidden; + font-size:0; +} + +/* 4.7. Destroy margin collapse */ +.no-collapse { padding-top:1px; } + +/* 4.8. Hide an element */ +.hide { display:none; } + +/* 5. LAYOUT */ +/* 5.1. Row */ +.row { + float:left; + width:100%; + margin:0; + padding:0; + border:none; +} + +/* 5.2. Last column in a row */ +.last { margin-right:0 !important; } + +/* 5.3. Content */ +.content { + padding:0; + margin:0; +} + +/* 6. HACKS */ +img { -ms-interpolation-mode:bicubic; } /* IE */ +.clear,.tabs,.content,.page,.expanded-page { + *overflow-y:auto; /* IE7 */ + *overflow-x:hidden; /* IE7 */ + _height:1%; /* IE6 */ + _overflow-y:visible; /* IE6 */ + _overflow-x:visible; /* IE6 */ +} +a.image,span.image,strong.image,em.image,.inline-block-top,.inline-block-middle,.inline-block-bottom { + display:-moz-inline-box; /* FF<3 */ + -moz-box-orient:vertical; /* FF<3 */ + *display:inline; /* IE */ +} + +/** +* cSans Button plugin v0.3.1 +* 2009 Copyright A navalla suíza http://anavallasuiza.com +* cSans is released under the GNU Affero GPL version 3 - more information at http://www.fsf.org/licensing/licenses/agpl-3.0.html +*/ + +/* 1. BASIC STYLES */ + +ul.button { + list-style: none; + padding: 0; + margin: 0; + display:block; + } +ul.button { + overflow-y: auto; + overflow-x: hidden; + } +ul.button li { + float: left; + margin: 0; + } +ul.button li a { + display: block; + z-index: 2; + } +a.button { + display: inline-block; + vertical-align: middle; + } + +/* 1.1. Normal status */ +a.button, +ul.button li a { + background-position: 100% 0; + background-repeat: no-repeat; + white-space: nowrap; + text-align: center; + cursor: pointer; + outline: 0; + } +a.button span, +ul.button li a span { + display: block; + background-position: 0 0; + background-repeat: no-repeat; + } + +/* 1.2. Hover/selected status */ +a.button:hover, +a.button.select, +ul.button li a:hover, +ul.button li.select a { + background-position: 100% -70px !important; + } +a.button:hover span, +a.button.select span, +ul.button li a:hover span, +ul.button li.select a span { + background-position: 0 -70px !important; + } + +/* 2. EDITABLE STYLES */ + +/* 2.1. Image background used */ +a.button, +.button a, +.button span { + background-image: url(../images/button.png); + } + +/* 2.2. Normal status (Example for padding 10px) */ +a.button, +.button a { + padding: 0 10px 0 0; /* Padding-right: 10px */ + margin: 0 1px 0 10px; /* Margin-left: 10px */ + text-decoration: none; + } +.button span { + padding: 4px 0 6px 10px; /*Padding-left: 10px */ + margin: 0 0 0 -10px; /* Margin-left: -10px */ + } + +/* 3. HACKS */ + +ul.button { + _height: 1%; /* IE6 */ + _overflow-y: visible; /* IE6 */ + _overflow-x: visible; /* IE6 */ + } +a.button span { + _float: left; /* Only IE6 */ + _position: relative; /* Only IE6 */ + } +a.button { + display: -moz-inline-box; /* FF<3 */ + display: inline-block; /* FF<3 */ + -moz-box-orient: vertical; /* FF<3 */ + *display: inline; /* IE */ + } + +/** +* cSans Tooltip pluging v0.1 +* 2009 Copyright A navalla suíza http://anavallasuiza.com +* cSans is released under the GNU Affero GPL version 3 - more information at http://www.fsf.org/licensing/licenses/agpl-3.0.html +*/ + +/* BASIC STYLES */ + +.tooltip:hover { + background:transparent; + text-decoration:none; + } +.tooltip span { + display:none; + padding:5px; + margin-left:10px; + width:150px; + } +.tooltip:hover span { + cursor: default; + display:inline; + position:absolute; + } + +/** +* cSans Flexible v0.1 +* 2009 Copyright A navalla suíza http://anavallasuiza.com +* cSans is released under the GNU Affero GPL version 3 - more information at http://www.fsf.org/licensing/licenses/agpl-3.0.html +*/ + +/* 1. BASIC STYLES */ +/* 1.1 Widths */ +.f10 { width:10%; } +.f20 { width:20%; } +.f25 { width:25%; } +.f30 { width:30%; } +.f33 { width:33.33%; } +.f40 { width:40%; } +.f50 { width:50%; } +.f60 { width:60%; } +.f66 { width:66.66%; } +.f70 { width:70%; } +.f75 { width:75%; } +.f80 { width:80%; } +.f90 { width:90%; } +.f100 { width:100%; } + +.f10,.f20,.f25,.f30,.f33,.f40,.f50,.f60,.f66,.f70,.f75,.f80,.f90,.f100 { + float:left; + overflow:hidden; +} + +/* 1.2 Margin-left */ +.fl10 { margin-left:10%; } +.fl20 { margin-left:20%; } +.fl25 { margin-left:25%; } +.fl30 { margin-left:30%; } +.fl33 { margin-left:33.33%; } +.fl40 { margin-left:40%; } +.fl50 { margin-left:50%; } +.fl60 { margin-left:60%; } +.fl66 { margin-left:66.66%; } +.fl70 { margin-left:70%; } +.fl75 { margin-left:75%; } +.fl80 { margin-left:80%; } +.fl90 { margin-left:90%; } +.fl100 { margin-left:100%; } + +/* 1.3 Margin-right */ +.fr10 { margin-right:10%; } +.fr20 { margin-right:20%; } +.fr25 { margin-right:25%; } +.fr30 { margin-right:30%; } +.fr33 { margin-right:33.33%; } +.fr40 { margin-right:40%; } +.fr50 { margin-right:50%; } +.fr60 { margin-right:60%; } +.fr66 { margin-right:66.66%; } +.fr70 { margin-right:70%; } +.fr75 { margin-right:75%; } +.fr80 { margin-right:80%; } +.fr90 { margin-right:90%; } +.fr100 { margin-right:100%; } + +/* 2. HACKS */ +.f10,.f20,.f25,.f30,.f33,.f40,.f50,.f60,.f66,.f70,.f75,.f80,.f90,.f100 { + _display:inline; /* IE5-6 */ + *margin-left:-1px; /* IE5-7 */ +} + +/** +* web2py Nuovo Theme +* ------------------ +**/ + +/* Basics */ + +html, body { + font-size: 13px; + text-align: left; + color: #333; + padding: 0; + margin: 0; + background: #fff url(../images/header_shadow.png) repeat-x left 33px; +} + +a { + color: #e8953c; + text-decoration: none; +} + +label { + color: #777; + font-weight: bold; + font-size: 100%; +} + +img { + vertical-align: baseline; +} + +td, th { + border: none; +} + +.center { + text-align: center; +} + +.centerblock { + margin: 0 auto; +} + +.clear { + clear: both; +} + +.att { + color: #d22; +} + +/* General */ + +h3 { + padding-left: 18px; + background: url(../images/sidebar_bullet.gif) no-repeat; + color: #555; + font-weight: normal; + font-size: 130%; +} + +.formfield { + padding: 0.7em 0.5em; + -moz-border-radius: 0.3em; + border-radius: 0.3em; + margin: 1em 0; + border: 1px solid #ddd; +} + +.buttongroup { + padding: 0.7em 0.5em; +} + +.formfield { + background: #eee; +} + +.flash { + position: fixed; + top: 2em; + right: 2em; + background: #e8953c; + color: #fff; + border: 2px solid #fff; + -moz-border-radius: 0.7em; + border-radius: 0.7em; + padding: 0.5em 1em; +} + +.tooltip span { + background: #9fb364; + color: #eef1d9; + border: 1px solid #eef1d9; + font-style: italic; + width: 20%; + padding: 0.3em; + -moz-border-radius: 0.5em; + border-radius: 0.5em; + font-size: 13px; + text-transform: none; +} + +.help { + width: 60%; + font-size: 1em; + padding: 0.3em; + -moz-border-radius: 0.5em; + border-radius: 0.5em; + background: #eef1d9; + color: #9fb364; + font-style: italic; + text-transform: none; +} + +.help h3 { + color: #9fb364; + font-size: 1.2em; + background: transparent; + font-weight: bold; +} + +.icon img { + vertical-align: middle; + cursor: pointer; +} + +.form td { + padding: 0.2em 1em 0.2em 0; +} + +/* Buttons */ + +.controls a.button, +.controls a.button span { + background-image: url(../images/small_button.png); +} + +.controls a.button span { + padding-top: 2px; +} + +.controls a.button { + color: #333; +} + +.controls a.special, +.controls a.special span { + background-image: url(../images/small_special_button.png); +} + +.controls a.special { + color: #ddd; +} + +/* Header */ + +#header { + background: #292929 url(../images/header_bg.png) repeat-x; + height: 33px; + overflow: hidden; +} + +/* Home button */ + +#start { + position: absolute; + top: 2px; + left: 13px; + margin: 0; +} + +#start a.button { + display: block; +} + +#start a.button, +#start a.button span { + background-image: url(../images/start.png); +} + +#start a { + text-indent: -999px; + overflow: hidden; + padding: 0; + margin: 0; +} + +#start a.button span { + width: 112px; + height: 36px; + padding: 0; + margin: 0; +} + +/* Menu */ + +#menu { + float: right; + margin: 3px 13px 0 0; +} + +#menu li { + float: left; + list-style: none; + margin-right: 0.4em; +} + +#menu a.button, +#menu a.button span { + background-image: url(../images/menu.png); +} + +#menu a.button { + padding-right: 1em; +} + +#menu a.button span { + padding-left: 1em; +} + +#menu a { + color: #333; +} + +/* Main area */ + +#main { + padding: 2em 1em 5em; + position: relative; +} + +#main h2 { + margin-top: 0; + font-weight: normal; + text-transform: uppercase; + border-bottom: 1px dotted #aaa; + padding-left: 18px; + background: transparent url(../images/section_bullet.png) no-repeat left 3px; + color: #aaa; +} + +/* Applist */ + +.applist h3 { + color: #aaa; + font-weight: normal; +} + +.applist ul { + margin: 0; +} + +.applist li { + list-style: none; + padding: 0; +} + +h3.editableapp, +h3.currentapp { + padding: 5px 0 5px 54px; +} + +h3.editableapp { + background: #fff url(../images/folder.png) no-repeat; +} + +h3.currentapp { + background: #fff url(../images/folder_locked.png) no-repeat; +} + +.applist .controls { + margin-left: 1.5em; +} + + +/* Site sidebar */ + +.sidebar_inner { + margin: 0 1em 0; + -moz-border-radius: 0.5em; + border-radius: 0.5em; + border: 1px solid #ddd; + min-width:400px; +} + +.sidebar h4 { + color: #888; +} + +.pwdchange { + padding: 1em; + float: right !important; +} + +.sidebar .box { + clear: right; + margin-top: 2em; + border-top: 1px solid #eee; + padding: 0 1em; +} + +.sidebar .box { + background: url(../images/sidebar_background.jpg) no-repeat; +} + +.sidebar .upgrade_version { + color: #71c837; +} + +/* Tweets */ + +#tweets ol { + margin: 1em 0; +} + +#tweets ol li { + background: #ebe8d0; + list-style: none; + -moz-border-radius: 0.5em; + border-radius: 0.5em; + padding: 0.5em; + margin: 1em 0; + border: 1px solid #aaa; +} + +#tweets .entry-date { + font-weight: bold; + display: block; +} + +/* Design/Plugin page */ + +.component { + cursor: pointer; +} + +.component_contents { + padding-left: 20px; +} + +.component_contents li { + list-style: none; +} + +.component_contents div.comptools { + margin-bottom: 1em; + padding-bottom: 0.5em; +} + +.component_contents div.formfield form { + margin-bottom: 0.2em; + margin-top: 0.2em; +} + +.file { + font-weight: bold; +} + +.folder { + display: block; + padding: 4px 0 4px 40px; + background: url(../images/folder_sm.png) no-repeat; + margin: 0.5em 0; +} + +.folder .file { + font-weight: bold; +} + +.sublist { + margin-left: 0; + border-left: 1px dotted #aaa; + padding-left: 0.5em; + margin-top: 0.5em; + margin-bottom: 0.0em; +} + +/* About */ + +.legalese { + background: #eee url(../images/embossed.png) repeat-y; + padding: 1em 1em 1em 2em; +} + +/* Wizard */ + +.step li { + list-style: none; + margin-left: 1em; + margin-top: 0.5em; +} + +.step #wizard_nav .box { + border-bottom: 1px dotted #aaa; + padding: 0.5em; +} + +.step #wizard_form { + padding: 0.5em 0 2em 2em; +} + +/* Editor */ + +.edit #body { + height: auto; + width: 100%; +} + +.edit .help li { + list-style: none; + padding: 0.5em 0; +} + +.edit .help tt { + font-weight: bold; + font-style: normal; + display: inline; /* Rest cSans base style */ + border: 1px solid #999; + background: #333; + color: #ddd; + padding: 0.3em; + -moz-border-radius: 0.3em; + border-radius: 0.3em; +} + +/* Ticket */ + +ul#snapshot > li { + list-style: none; +} + +.inspect td, +.versions td, +.inspect th, +.versions th { + padding: 0.3em; + // border: 1px solid #aaa; +} + +.inspect th, +.versions th { + background: #ddd; + color: #777; +} + +.ticket h3 { + margin-top: 0.5em; + background: url(../images/ticket_section.png) no-repeat; + padding: 30px; + text-transform: uppercase; +} + + +.ticket .inspect li { + list-style: none; +} + +#frames ul { + margin: 0; +} + +#frames li { + margin: 0.5em 0; + padding: 0; + list-style: none; +} + +/* Errors */ + +.errors table.sortable th { + background: url(../images/header_bg.png) repeat-x; + color: #eee; + // border-right: 1px solid #eee; + padding-top: 0.5em; +} + +.errors table.sortable td { + border-bottom: 1px dotted #ddd; + padding: 0.4em 0.2em; +} + +/* Tests */ + +.test h3.failed { + background-image: url(../images/red_bullet.gif); +} + +.test h3.nodoctests { + background-image: url(../images/dim_bullet.gif); +} + +/* Footer */ + +#footer { + padding: 1em 0 0; + color: #eee; + text-align: center; + background: #292929 url(../images/header_bg.png) repeat-x; + height: 45px; + overflow: hidden; + clear: both; +} + +/* Shell */ + +.shell #wrapper { + margin: 0 auto; +} + +.shell #output { + width: 75%; + height:30em; +} + +.shell #output, +.shell #output pre { + color: #e8953c; + background: white; + border: 1px solid #333; +} + +.shell .prompt, +.shell #output, +.shell pre, +.shell #caret { + font-family: monospace; +} + +.shell .prompt, +.shell #output, +.shell #caret { + font-size: 10pt; + padding: 6px; + padding-right: 0em; +} + +.shell #shellwrapper { + background: white; + border: 1px solid #333; + color: #e8953c; + width: 75%; + // padding: 6px; + // -moz-border-radius: 1em; + // border-radius: 1em; + margin: 1em 0 +} + +.shell #caret { + border: 0; + float: left; +} + +.shell .prompt { + color: #e8953c; + width: 85%; + height: 4em; + border: 0; +} + +.shell .prompt, .shell #output { + overflow: auto; +} + +.shell table, tr, td { + text-align: left; + vertical-align: top; +} + +.shell pre { + border: 0; + padding: 0; + margin: 0; + color: #333333; +} + +.shell .message { + width: 100%; + color: #8AD; + font-weight: bold; + font-style: italic; +} + +.shell .error { + color: #F44; +} + +.shell .username { + font-weight: bold; +} + +.shell dd{ + color: #000033; +} + +.shell dt{ + color: #333333; +} + +.shell #ajax-status { + font-weight: bold; +} + +.shell .processing { + background-image: url('../images/spinner.gif'); +} + +.shell #caret { + width: 2.5em; + margin-right: 0px; + padding-right: 0px; + border-right: 0px; +} + + +/* ie7 hacks */ + +.sublist { + zoom: 1; +} + +.untranslated { background-color: #FFCC00; } +.translated { background-color: white; } +.ui-multiselect { border: 1px solid #ccc; width:400px;} +#editor_area textarea { height: 400px; width: 100% } ADDED applications/admin/static/eamy/bundle_markup.js Index: applications/admin/static/eamy/bundle_markup.js ================================================================== --- /dev/null +++ applications/admin/static/eamy/bundle_markup.js @@ -0,0 +1,389 @@ +/* + * eAmy.Offline - Amy Editor embedded for offline use. + * http://www.april-child.com/amy + * + * Published under MIT License. + * Copyright (c) 2007-2008 Petr Krontorád, April-Child.com + + Permission is hereby granted, free of charge, to any person + obtaining a copy of this software and associated documentation + files (the "Software"), to deal in the Software without + restriction, including without limitation the rights to use, + copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the + Software is furnished to do so, subject to the following + conditions: + + The above copyright notice and this permission notice shall be + included in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + OTHER DEALINGS IN THE SOFTWARE. + + * + * + * This file is auto-generated from original Fry Framework and Amy Editor sources.. + */ + + +// Generated from theme definition file. +$class('ac.chap.theme.EAmy < ac.chap.Theme'); + + ac.chap.theme.EAmy.prototype.initDefinition = function() + { +// $call(this, 'ac.chap.Theme.initDefinition');this.cssId = 'black'; +//this.background = '#072240'; +//this.textColor = '#DFEFFF'; +//this.caretColor = 'lime'; +//this.caretRowStyleActive = '#041629'; +//this.selectionStyle = '#86553b'; +//this.colorScheme[ac.chap.TOKEN_MULTIROW_COMMENT] = 'color:#0084FF;font-style:italic'; +//this.colorScheme[ac.chap.TOKEN_SINGLEROW_COMMENT] = 'color:#0084FF;font-style:italic'; +//this.colorScheme[ac.chap.TOKEN_SINGLE_QUOTED] = 'color:#00DF00'; +//this.colorScheme[ac.chap.TOKEN_DOUBLE_QUOTED] = 'color:#00DF00'; +//this.colorScheme[ac.chap.CHUNK_KEYWORD] = 'color:#FF9D00'; +//this.colorScheme[ac.chap.CHUNK_NUMBER] = 'color:#FF5B8C'; +//this.colorScheme[ac.chap.CHUNK_OPERATOR] = 'color:#FF9D00;'; +//this.colorScheme[ac.chap.CHUNK_PARENTHESIS] = 'color:#FFF177'; +//this.colorScheme[ac.chap.CHUNK_KEYWORD_CUSTOM] = 'color:#54FFB8'; +//this.colorScheme[ac.chap.CHUNK_FUNCTION_NAME] = 'color:#FFE000'; +//this.colorScheme[ac.chap.CHUNK_LIBRARY] = 'color:#71E5B6'; +//this.colorScheme[ac.chap.CHUNK_LIBRARY_CUSTOM] = 'color:#FF78E5'; + + $call(this, 'ac.chap.Theme.initDefinition');this.cssId = 'twilight'; +this.background = '#141414'; +this.textColor = '#F8F8F8'; +this.caretColor = '#A7A7A7'; +this.caretRowStyleActive = '#1B1B1B'; +this.selectionStyle = '#3C4043'; +this.colorScheme[ac.chap.TOKEN_MULTIROW_COMMENT] = 'color:#605A60;font-style:italic'; +this.colorScheme[ac.chap.TOKEN_SINGLEROW_COMMENT] = 'color:#605A60;font-style:italic'; +this.colorScheme[ac.chap.TOKEN_SINGLE_QUOTED] = 'color:#8B9F67'; +this.colorScheme[ac.chap.TOKEN_DOUBLE_QUOTED] = 'color:#D4F29E'; +this.colorScheme[ac.chap.CHUNK_KEYWORD] = 'color:#D2A964'; +this.colorScheme[ac.chap.CHUNK_NUMBER] = 'color:#DE6848'; +this.colorScheme[ac.chap.CHUNK_OPERATOR] = 'color:#EFC25A;'; +this.colorScheme[ac.chap.CHUNK_PARENTHESIS] = 'color:#ABC4DC'; +this.colorScheme[ac.chap.CHUNK_KEYWORD_CUSTOM] = 'color:#A0849E'; +this.colorScheme[ac.chap.CHUNK_FUNCTION_NAME] = 'color:#DAD280'; +this.colorScheme[ac.chap.CHUNK_LIBRARY] = 'color:#7286A8'; +this.colorScheme[ac.chap.CHUNK_LIBRARY_CUSTOM] = 'color:#A55C29'; +} + + +// Generated from bundle keymap definition file. +ac.chap.KeyMap.prototype.initDefinition = function() + { + var _ = '\n'; + this.compile + (""+_+ "KEY: 0" ++_+ " insert(character:true)" ++_+ "KEY: -37" ++_+ " caret(move:'left')" ++_+ "KEY: -37+shift" ++_+ " caret(move:'left')" ++_+ " selection(add:true)" ++_+ "KEY: -37+ctrl" ++_+ " caret(move:'prev_regexp', re:'[^|._A-Z ,|(|);]*$')" ++_+ "KEY: -37+alt" ++_+ " caret(move:'prev_word')" ++_+ "KEY: -37+ctrl+shift" ++_+ " caret(move:'prev_regexp', re:'[^|._A-Z ,|(|);]*$')" ++_+ " selection(add:true)" ++_+ "KEY: -37+alt+shift" ++_+ " caret(move:'prev_word')" ++_+ " selection(add:true)" ++_+ "KEY: -37+meta" ++_+ " caret(move:'row_start')" ++_+ "KEY: -37+meta+shift" ++_+ " caret(move:'row_start')" ++_+ " selection(add:true)" ++_+ "KEY: -39" ++_+ " caret(move:'right')" ++_+ "KEY: -39+shift" ++_+ " caret(move:'right')" ++_+ " selection(add:true)" ++_+ "KEY: -39+ctrl" ++_+ " caret(move:'next_regexp', re:'^[^|._A-Z ,|(|);]*')" ++_+ "KEY: -39+alt" ++_+ " caret(move:'next_word')" ++_+ "KEY: -39+ctrl+shift" ++_+ " caret(move:'next_regexp', re:'^[^|._A-Z ,|(|);]*')" ++_+ " selection(add:true)" ++_+ "KEY: -39+alt+shift" ++_+ " caret(move:'next_word')" ++_+ " selection(add:true)" ++_+ "KEY: -39+meta" ++_+ " caret(move:'row_end')" ++_+ "KEY: -39+meta+shift" ++_+ " caret(move:'row_end')" ++_+ " selection(add:true)" ++_+ "KEY: -38" ++_+ " caret(move:'up')" ++_+ "KEY: -38+shift" ++_+ " caret(move:'up')" ++_+ " selection(add:true)" ++_+ "KEY: -40" ++_+ " caret(move:'down')" ++_+ "KEY: -40+shift" ++_+ " caret(move:'down')" ++_+ " selection(add:true)" ++_+ "KEY: -13" ++_+ " insert(row:true)" ++_+ "KEY: -8" ++_+ " delete(character:true)" ++_+ "KEY: -46" ++_+ " delete(character:false)" ++_+ "KEY: 75+ctrl+shift" ++_+ " delete(row:true)" ++_+ "KEY: -27" ++_+ " custom(action:'WordComplete', direction:true)" ++_+ "KEY: -27+shift" ++_+ " custom(action:'WordComplete', direction:false)" ++_+ "KEY: -9" ++_+ " custom(action:'SnippetComplete')" ++_+ "KEY: 123" ++_+ " custom(action:'AutoComplete', use_selection:true, text:'}')" ++_+ "KEY: 34" ++_+ " custom(action:'AutoComplete', use_selection:true, text:'\"')" ++_+ "KEY: 91" ++_+ " custom(action:'AutoComplete', use_selection:true, text:']')" ++_+ "KEY: 40" ++_+ " custom(action:'AutoComplete', use_selection:true, text:')')" ++_+ "KEY: -36" ++_+ " caret(move:'doc_start')" ++_+ "KEY: -36+shift" ++_+ " caret(move:'doc_start')" ++_+ " selection(add:true)" ++_+ "KEY: -35" ++_+ " caret(move:'doc_end')" ++_+ "KEY: -35+shift" ++_+ " caret(move:'doc_end')" ++_+ " selection(add:true)" ++_+ "KEY: -34+meta" ++_+ " caret(move:'page_down')" ++_+ "KEY: -34+meta+shift" ++_+ " caret(move:'page_down')" ++_+ " selection(add:true)" ++_+ "KEY: -33+meta" ++_+ " caret(move:'page_up')" ++_+ "KEY: -33+meta+shift" ++_+ " caret(move:'page_down')" ++_+ " selection(add:true)" ++_+ "KEY: 99+meta" ++_+ " clipboard(copy:true)" ++_+ "KEY: 120+meta" ++_+ " clipboard(cut:true)" ++_+ "KEY: 122+meta" ++_+ " undo()" ++_+ "KEY: 90+meta+shift" ++_+ " redo()" ++_+ "KEY: 97+meta" ++_+ " selection(all:true)" ++_+ "KEY: 97+ctrl" ++_+ " selection(all:true)" ++_+ "KEY: -113" ++_+ " custom(action:'GoToBookmark', direction:1)" ++_+ "KEY: -113+shift" ++_+ " custom(action:'GoToBookmark', direction:-1)" ++_+ "KEY: -113+meta" ++_+ " custom(action:'ToggleBookmark')" ++_+ "KEY: 91+meta" ++_+ " custom(action:'Indent', direction:'left')" ++_+ "KEY: 93+meta" ++_+ " custom(action:'Indent', direction:'right')" ++_+ "KEY: 47+meta" ++_+ " custom(action:'Comment')" ++_+ "KEY: 43+meta" ++_+ " custom(action:'RuntimeOption', key:'font.size', value:'bigger')" ++_+ "KEY: 45+meta" ++_+ " custom(action:'RuntimeOption', key:'font.size', value:'smaller')" ++_+ "KEY: 101+meta" ++_+ " custom(action:'SetSearchKeyword')" ++_+ "KEY: 103+meta" ++_+ " custom(action:'SearchKeyword', direction:'down')" ++_+ "KEY: 71+shift+meta" ++_+ " custom(action:'SearchKeyword', direction:'up')" ++_+ "KEY: 102+ctrl" ++_+ " custom(action:'SearchInteractive')" ++_+ "KEY: 83+ctrl+shift" ++_+ " custom(action:'SearchInteractive')" ++_+ "KEY: 102+meta" ++_+ " custom(action:'SearchInteractive')" ++_+ "KEY: -13" ++_+ " custom(action:'SmartIndent', split_line:true, indent_tab_when_starts:'class module def if else unless rescue ensure while do __class__')" ++_+ "KEY: -13+meta" ++_+ " custom(action:'SmartIndent', split_line:false, indent_tab_when_starts:'class module def if else unless rescue ensure while do __class__')" ++_+ "KEY: 39" ++_+ " custom(action:'AutoComplete', use_selection:true, text:'\\'')" +)}; + +$class('ac.chap.lang.EAmy < ac.chap.Language'); + + ac.chap.lang.EAmy.prototype.initDefinition = function() + { + $call(this, 'ac.chap.Language.initDefinition'); +this.singleQuoteStringMarker = "'"; +this.singleQuoteStringMarkerException = "\\"; +this.doubleQuoteStringMarker = "\""; +this.doubleQuoteStringMarkerException = "\\" +this.wordDelimiter = /[\w\.\d]/; +this.indentIgnoreMarker = /[\.]/; +this.foldingStartMarkers = [/^\s*<(div)\b.*>/i, /^\s*<(ul)\b.*>/i]; +this.foldingParityMarkers = [/^\s*<(div)\b.*>/i, /^\s*<(ul)\b.*>/i]; +this.foldingStopMarkers = [/^\s*<\/(div)>/i, /^\s*<\/(ul)>/i]; +this.singleRowCommentStartMarkers = []; +this.multiRowCommentStartMarker = ""; +this.chunkRules.push([/(([^\w]|^)(\d{1,}[\d\.Ee]*)([^w]|$))/i, 3, ac.chap.CHUNK_NUMBER]) +this.chunkRules.push([/(\+|\-|\*|\/|\=|\!|\^|\%|\||\&|\<|\>)/i, 0, ac.chap.CHUNK_OPERATOR]) +this.chunkRules.push([/(\(|\)|\[|\]|\{|\})/i, 0, ac.chap.CHUNK_PARENTHESIS]) +this.chunkRules.push([/((<|<\/)([\w-_\:]*)([ >]))/i, 3, ac.chap.CHUNK_KEYWORD]) +this.chunkRules.push([/(([ \t])([\w-_\:]*)(=$))/i, 3, ac.chap.CHUNK_KEYWORD_CUSTOM]) +this.chunkRules.push([/(([^\w]|^)(!DOCTYPE)([^\w]|$))/i, 3, ac.chap.CHUNK_LIBRARY]) +this.chunkRules.push([/(([^\w]|^)(\d{1,}[\d\.Ee]*)([^w]|$))/i, 3, ac.chap.CHUNK_NUMBER]) +this.chunkRules.push([/(\+|\-|\*|\/|\=|\!|\^|\%|\||\&|\<|\>)/i, 0, ac.chap.CHUNK_OPERATOR]) +this.chunkRules.push([/(\(|\)|\[|\]|\{|\})/i, 0, ac.chap.CHUNK_PARENTHESIS]) +this.chunkRules.push([/((<|<\/)([\w-_\:]*)([ >]))/i, 3, ac.chap.CHUNK_KEYWORD]) +this.chunkRules.push([/(([ \t])([\w-_\:]*)(=$))/i, 3, ac.chap.CHUNK_KEYWORD_CUSTOM]) +this.chunkRules.push([/(([^\w]|^)(!DOCTYPE)([^\w]|$))/i, 3, ac.chap.CHUNK_LIBRARY]) +} +var snippet = {}; +snippet = {tab_activation: '', code: ''}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'ie6', code: '$0'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'iegte7', code: '$0'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'ie5', code: '$0'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'ie', code: '$0'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'ienot', code: '${1:${AMY_SELECTED_TEXT: IE Conditional Comment: NOT Internet Explorer }}$0'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'ielte6', code: '$0'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: '', code: '$0'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'ielt6', code: '$0'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: '', code: ''}; +eamy.snippets.push(snippet); +snippet = {tab_activation: '', code: '${0:${AMY_SELECTED_TEXT/\A(.*)<\/em>\z|.*/(?1:$1:$0<\/em>)/m}}'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: '', code: '${0:${AMY_SELECTED_TEXT/\A(.*)<\/strong>\z|.*/(?1:$1:$0<\/strong>)/m}}'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: '', code: ''}; +eamy.snippets.push(snippet); +snippet = {tab_activation: '', code: ''}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'left', code: '←'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'backtab', code: '⇤'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'enter', code: '⌅'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'arrow', code: '→'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'option', code: '⌥'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'shift', code: '⇧'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: '', code: ' '}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'delete', code: '⌦'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'backspace', code: '⌫'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'escape', code: '⎋'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'tab', code: '⇥'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'up', code: '↑'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'control', code: '⌃'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'return', code: '↩'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'down', code: '↓'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'command', code: '⌘'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: '', code: ''}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'doctype', code: '\n'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'doctype', code: '\n'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'doctypexf', code: '\n'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'doctypext', code: '\n'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'doctypex', code: '\n'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'doctypexs', code: '\n'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 't', code: '<{${1:tag_name}}>$0'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: '', code: ''}; +eamy.snippets.push(snippet); +snippet = {tab_activation: '', code: ''}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'body', code: '\n $0\n'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'textarea', code: ''}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'div', code: '\n ${0:$AMY_SELECTED_TEXT}\n'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: '', code: '
'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'title', code: '${1:${AMY_FILENAME/((.+)\..*)?/(?2:$2:Page Title)/}}'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'movie', code: '\n \n \n \n \n'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'input', code: ''}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'head', code: '\n \n ${1:${AMY_FILENAME/((.+)\..*)?/(?2:$2:Page Title)/}}\n $0\n'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'meta', code: ''}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'h1', code: '

${1:$AMY_SELECTED_TEXT}

'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'form', code: '\n $0\n\n

\n'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'link', code: ''}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'style', code: ''}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'table', code: '
\n \n \n
${5:Header}
${0:Data}
'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'base', code: ''}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'scriptsrc', code: ''}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'mailto', code: '${3:email me}'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'script', code: ''}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'c', code: 'class="$1"'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'i', code: 'id="$1"'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'p', code: '{{pass}}'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'ex', code: '{{extend \'${1:layout.html}\'}}'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'for', code: '{{for ${1:bar} in ${2:foo}:}}\n $0\n{{pass}}'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'if', code: '{{if ${1:foo} ${2:==/!=/=>/=/<} ${3:bar}:}}\n $0\n{{pass}}'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: '=', code: '{{=$0}}'}; +eamy.snippets.push(snippet); + + ADDED applications/admin/static/eamy/bundle_python.js Index: applications/admin/static/eamy/bundle_python.js ================================================================== --- /dev/null +++ applications/admin/static/eamy/bundle_python.js @@ -0,0 +1,296 @@ +/* + * eAmy.Offline - Amy Editor embedded for offline use. + * http://www.april-child.com/amy + * + * Published under MIT License. + * Copyright (c) 2007-2008 Petr Krontorád, April-Child.com + + Permission is hereby granted, free of charge, to any person + obtaining a copy of this software and associated documentation + files (the "Software"), to deal in the Software without + restriction, including without limitation the rights to use, + copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the + Software is furnished to do so, subject to the following + conditions: + + The above copyright notice and this permission notice shall be + included in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + OTHER DEALINGS IN THE SOFTWARE. + + * + * + * This file is auto-generated from original Fry Framework and Amy Editor sources.. + */ + + +// Generated from theme definition file. +$class('ac.chap.theme.EAmy < ac.chap.Theme'); + + ac.chap.theme.EAmy.prototype.initDefinition = function() + { +// $call(this, 'ac.chap.Theme.initDefinition');this.cssId = 'black'; +//this.background = '#072240'; +//this.textColor = '#DFEFFF'; +//this.caretColor = 'lime'; +//this.caretRowStyleActive = '#041629'; +//this.selectionStyle = '#86553b'; +//this.colorScheme[ac.chap.TOKEN_MULTIROW_COMMENT] = 'color:#0084FF;font-style:italic'; +//this.colorScheme[ac.chap.TOKEN_SINGLEROW_COMMENT] = 'color:#0084FF;font-style:italic'; +//this.colorScheme[ac.chap.TOKEN_SINGLE_QUOTED] = 'color:#00DF00'; +//this.colorScheme[ac.chap.TOKEN_DOUBLE_QUOTED] = 'color:#00DF00'; +//this.colorScheme[ac.chap.CHUNK_KEYWORD] = 'color:#FF9D00'; +//this.colorScheme[ac.chap.CHUNK_NUMBER] = 'color:#FF5B8C'; +//this.colorScheme[ac.chap.CHUNK_OPERATOR] = 'color:#FF9D00;'; +//this.colorScheme[ac.chap.CHUNK_PARENTHESIS] = 'color:#FFF177'; +//this.colorScheme[ac.chap.CHUNK_KEYWORD_CUSTOM] = 'color:#54FFB8'; +//this.colorScheme[ac.chap.CHUNK_FUNCTION_NAME] = 'color:#FFE000'; +//this.colorScheme[ac.chap.CHUNK_LIBRARY] = 'color:#71E5B6'; +//this.colorScheme[ac.chap.CHUNK_LIBRARY_CUSTOM] = 'color:#FF78E5'; +// + $call(this, 'ac.chap.Theme.initDefinition'); +this.cssId = 'twilight'; +this.background = '#141414'; +this.textColor = '#F8F8F8'; +this.caretColor = '#A7A7A7'; +this.caretRowStyleActive = '#1B1B1B'; +this.selectionStyle = '#3C4043'; +this.colorScheme[ac.chap.TOKEN_MULTIROW_COMMENT] = 'color:#605A60;font-style:italic'; +this.colorScheme[ac.chap.TOKEN_SINGLEROW_COMMENT] = 'color:#605A60;font-style:italic'; +this.colorScheme[ac.chap.TOKEN_SINGLE_QUOTED] = 'color:#8B9F67'; +this.colorScheme[ac.chap.TOKEN_DOUBLE_QUOTED] = 'color:#D4F29E'; +this.colorScheme[ac.chap.CHUNK_KEYWORD] = 'color:#D2A964'; +this.colorScheme[ac.chap.CHUNK_NUMBER] = 'color:#DE6848'; +this.colorScheme[ac.chap.CHUNK_OPERATOR] = 'color:#EFC25A;'; +this.colorScheme[ac.chap.CHUNK_PARENTHESIS] = 'color:#ABC4DC'; +this.colorScheme[ac.chap.CHUNK_KEYWORD_CUSTOM] = 'color:#A0849E'; +this.colorScheme[ac.chap.CHUNK_FUNCTION_NAME] = 'color:#DAD280'; +this.colorScheme[ac.chap.CHUNK_LIBRARY] = 'color:#7286A8'; +this.colorScheme[ac.chap.CHUNK_LIBRARY_CUSTOM] = 'color:#A55C29'; +} + + + +// Generated from bundle keymap definition file. +ac.chap.KeyMap.prototype.initDefinition = function() + { + var _ = '\n'; + this.compile + (""+_+ "KEY: 0" ++_+ " insert(character:true)" ++_+ "KEY: -37" ++_+ " caret(move:'left')" ++_+ "KEY: -37+shift" ++_+ " caret(move:'left')" ++_+ " selection(add:true)" ++_+ "KEY: -37+ctrl" ++_+ " caret(move:'prev_regexp', re:'[^|._A-Z ,|(|);]*$')" ++_+ "KEY: -37+alt" ++_+ " caret(move:'prev_word')" ++_+ "KEY: -37+ctrl+shift" ++_+ " caret(move:'prev_regexp', re:'[^|._A-Z ,|(|);]*$')" ++_+ " selection(add:true)" ++_+ "KEY: -37+alt+shift" ++_+ " caret(move:'prev_word')" ++_+ " selection(add:true)" ++_+ "KEY: -37+meta" ++_+ " caret(move:'row_start')" ++_+ "KEY: -37+meta+shift" ++_+ " caret(move:'row_start')" ++_+ " selection(add:true)" ++_+ "KEY: -39" ++_+ " caret(move:'right')" ++_+ "KEY: -39+shift" ++_+ " caret(move:'right')" ++_+ " selection(add:true)" ++_+ "KEY: -39+ctrl" ++_+ " caret(move:'next_regexp', re:'^[^|._A-Z ,|(|);]*')" ++_+ "KEY: -39+alt" ++_+ " caret(move:'next_word')" ++_+ "KEY: -39+ctrl+shift" ++_+ " caret(move:'next_regexp', re:'^[^|._A-Z ,|(|);]*')" ++_+ " selection(add:true)" ++_+ "KEY: -39+alt+shift" ++_+ " caret(move:'next_word')" ++_+ " selection(add:true)" ++_+ "KEY: -39+meta" ++_+ " caret(move:'row_end')" ++_+ "KEY: -39+meta+shift" ++_+ " caret(move:'row_end')" ++_+ " selection(add:true)" ++_+ "KEY: -38" ++_+ " caret(move:'up')" ++_+ "KEY: -38+shift" ++_+ " caret(move:'up')" ++_+ " selection(add:true)" ++_+ "KEY: -40" ++_+ " caret(move:'down')" ++_+ "KEY: -40+shift" ++_+ " caret(move:'down')" ++_+ " selection(add:true)" ++_+ "KEY: -13" ++_+ " insert(row:true)" ++_+ "KEY: -8" ++_+ " delete(character:true)" ++_+ "KEY: -46" ++_+ " delete(character:false)" ++_+ "KEY: 75+ctrl+shift" ++_+ " delete(row:true)" ++_+ "KEY: -27" ++_+ " custom(action:'WordComplete', direction:true)" ++_+ "KEY: -27+shift" ++_+ " custom(action:'WordComplete', direction:false)" ++_+ "KEY: -9" ++_+ " custom(action:'SnippetComplete')" ++_+ "KEY: 123" ++_+ " custom(action:'AutoComplete', use_selection:true, text:'}')" ++_+ "KEY: 34" ++_+ " custom(action:'AutoComplete', use_selection:true, text:'\"')" ++_+ "KEY: 91" ++_+ " custom(action:'AutoComplete', use_selection:true, text:']')" ++_+ "KEY: 40" ++_+ " custom(action:'AutoComplete', use_selection:true, text:')')" ++_+ "KEY: -36" ++_+ " caret(move:'doc_start')" ++_+ "KEY: -36+shift" ++_+ " caret(move:'doc_start')" ++_+ " selection(add:true)" ++_+ "KEY: -35" ++_+ " caret(move:'doc_end')" ++_+ "KEY: -35+shift" ++_+ " caret(move:'doc_end')" ++_+ " selection(add:true)" ++_+ "KEY: -34+meta" ++_+ " caret(move:'page_down')" ++_+ "KEY: -34+meta+shift" ++_+ " caret(move:'page_down')" ++_+ " selection(add:true)" ++_+ "KEY: -33+meta" ++_+ " caret(move:'page_up')" ++_+ "KEY: -33+meta+shift" ++_+ " caret(move:'page_down')" ++_+ " selection(add:true)" ++_+ "KEY: 99+meta" ++_+ " clipboard(copy:true)" ++_+ "KEY: 120+meta" ++_+ " clipboard(cut:true)" ++_+ "KEY: 122+meta" ++_+ " undo()" ++_+ "KEY: 90+meta+shift" ++_+ " redo()" ++_+ "KEY: 97+meta" ++_+ " selection(all:true)" ++_+ "KEY: 97+ctrl" ++_+ " selection(all:true)" ++_+ "KEY: -113" ++_+ " custom(action:'GoToBookmark', direction:1)" ++_+ "KEY: -113+shift" ++_+ " custom(action:'GoToBookmark', direction:-1)" ++_+ "KEY: -113+meta" ++_+ " custom(action:'ToggleBookmark')" ++_+ "KEY: 91+meta" ++_+ " custom(action:'Indent', direction:'left')" ++_+ "KEY: 93+meta" ++_+ " custom(action:'Indent', direction:'right')" ++_+ "KEY: 47+meta" ++_+ " custom(action:'Comment')" ++_+ "KEY: 43+meta" ++_+ " custom(action:'RuntimeOption', key:'font.size', value:'bigger')" ++_+ "KEY: 45+meta" ++_+ " custom(action:'RuntimeOption', key:'font.size', value:'smaller')" ++_+ "KEY: 101+meta" ++_+ " custom(action:'SetSearchKeyword')" ++_+ "KEY: 103+meta" ++_+ " custom(action:'SearchKeyword', direction:'down')" ++_+ "KEY: 71+shift+meta" ++_+ " custom(action:'SearchKeyword', direction:'up')" ++_+ "KEY: 102+ctrl" ++_+ " custom(action:'SearchInteractive')" ++_+ "KEY: 83+ctrl+shift" ++_+ " custom(action:'SearchInteractive')" ++_+ "KEY: 102+meta" ++_+ " custom(action:'SearchInteractive')" ++_+ "KEY: -13" ++_+ " custom(action:'SmartIndent', split_line:true, indent_tab_when_starts:'class module def if else unless rescue ensure while do __class__')" ++_+ "KEY: -13+meta" ++_+ " custom(action:'SmartIndent', split_line:false, indent_tab_when_starts:'class module def if else unless rescue ensure while do __class__')" ++_+ "KEY: 39" ++_+ " custom(action:'AutoComplete', use_selection:true, text:'\\'')" +)}; + +$class('ac.chap.lang.EAmy < ac.chap.Language'); + + ac.chap.lang.EAmy.prototype.initDefinition = function() + { + $call(this, 'ac.chap.Language.initDefinition'); +this.singleQuoteStringMarker = "'"; +this.singleQuoteStringMarkerException = "\\"; +this.doubleQuoteStringMarker = "\""; +this.doubleQuoteStringMarkerException = "\\"; +this.wordDelimiter = /[\w\d]/; +this.indentIgnoreMarker = /[\t \s]/; +this.foldingStartMarkers = [/^\s*def|class/i]; +this.foldingParityMarkers = [/do|(^\s*if)|(^\s*def)|(^\s*class)/i]; +this.foldingStopMarkers = [/^\s{0,1}$/i]; +this.singleRowCommentStartMarkers = ['#']; +this.multiRowCommentStartMarker = "\"\"\""; +this.multiRowCommentEndMarker = "\"\"\""; +this.stringInterpolation = ['(#\{[^\}]*\})', 1]; +this.chunkRules.push([/(([^\w]|^)(\d{1,}[\d\.Ee]*)([^w]|$))/i, 3, ac.chap.CHUNK_NUMBER]) +this.chunkRules.push([/(\+|\-|\*|\/|\=|\!|\^|\%|\||\&|\<|\>)/i, 0, ac.chap.CHUNK_OPERATOR]) +this.chunkRules.push([/(\(|\)|\[|\]|\{|\})/i, 0, ac.chap.CHUNK_PARENTHESIS]) +this.chunkRules.push([/(([^\w]|^)(elif|else|except|finally|for|if|try|while|with)([^\w]|$))/i, 3, ac.chap.CHUNK_KEYWORD]) +this.chunkRules.push([/(([^\w]|^)(@[\w]*|break|continue|pass|raise|return|yield|and|in|is|not|or|as|assert|del|exec|print)([^\w]|$))/i, 3, ac.chap.CHUNK_KEYWORD_CUSTOM]) +this.chunkRules.push([/((def[ ]{1,})([\w]{1,}))/i, 3, ac.chap.CHUNK_FUNCTION_NAME]) +this.chunkRules.push([/(([^\w]|^)(__import__|all|abs|any|apply|callable|chr|cmp|coerce|compile|delattr|dir|divmod|eval|execfile|filter|getattr|globals|hasattr|hash|hex|id|input|intern|isinstance|issubclass|iter|len|locals|map|max|min|oct|ord|pow|range|raw_input|reduce|reload|repr|round|setattr|sorted|sum|unichr|vars|zip|basestring|bool|buffer|classmethod|complex|dict|enumerate|file|float|frozenset|int|list|long|object|open|property|reversed|set|slice|staticmethod|str|super|tuple|type|unicode|xrange)([^\w]|$))/i, 3, ac.chap.CHUNK_LIBRARY]) +this.chunkRules.push([/(([^\w]|^)((__(all|bases|class|debug|dict|doc|file|members|metaclass|methods|name|slots|weakref)__)|(import|from| abs|add|and|call|cmp|coerce|complex|contains|del|delattr|delete|delitem|delslice|div|divmod|enter|eq|exit|float|floordiv|ge|get|getattr|getattribute|getitem|getslice|gt|hash|hex|iadd|iand|idiv|ifloordiv|ilshift|imod|imul|init|int|invert|ior|ipow|irshift|isub|iter|itruediv|ixor|le|len|long|lshift|lt|mod|mul|ne|neg|new|nonzero|oct|or|pos|pow|radd|rand|rdiv|rdivmod|repr|rfloordiv|rlshift|rmod|rmul|ror|rpow|rrshift|rshift|rsub|rtruediv|rxor|set|setattr|setitem|setslice|str|sub|truediv|unicode|xor))([^\w]|$))/i, 3, ac.chap.CHUNK_LIBRARY_CUSTOM]) +} +var snippet = {}; +snippet = {tab_activation: '', code: ''}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'ifmain', code: 'if __name__ == '+"'"+'__main__'+"'"+':\n ${1:main()}$0'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'try', code: 'try:\n ${1:pass}\nexcept ${2:Exception}, ${3:e}:\n ${4:raise e}\nelse:\n ${5:pass}'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'property', code: 'def ${1:foo}():\n doc = "${2:The $1 property.}"\n def fget(self):\n ${3:return self._$1}\n def fset(self, value):\n ${4:self._$1 = value}\n def fdel(self):\n ${5:del self._$1}\n return locals()\n$1 = property(**$1())$0'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: '', code: ''}; +eamy.snippets.push(snippet); +snippet = {tab_activation: '__', code: '__${1:init}__'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: '.', code: 'self.'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: '', code: ''}; +eamy.snippets.push(snippet); +//snippet = {tab_activation: 'def', code: 'def ${1:fname}(${2:`if [ "$TM_CURRENT_LINE" != "" ]\n # poor man'+"'"+'s way ... check if there is an indent or not\n # (cuz we would have lost the class scope by this point)\n then\n echo "self"\n fi`}):\n ${3/.+/"""/}${3:docstring for $1}${3/.+/"""\n/}${3/.+/\t/}${0:pass}'}; +//eamy.snippets.push(snippet); +snippet = {tab_activation: 'def', code: 'def ${1:fname}(${2:`if [ "$TM_CURRENT_LINE" != "" ]\n # poor man'+"'"+'s way ... check if there is an indent or not\n # (cuz we would have lost the class scope by this point)\n then\n echo "self"\n fi`}):\n ${3:}\n ${0:return dict()}'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'class', code: 'class ${1:ClassName}(${2:object}):\n ${3/.+/"""/}${3:docstring for $1}${3/.+/"""\n/}${3/.+/\t/}def __init__(self${4/([^,])?(.*)/(?1:, )/}${4:arg}):\n ${5:super($1, self).__init__()}\n${4/(\A\s*,\s*\Z)|,?\s*([A-Za-z_][a-zA-Z0-9_]*)\s*(=[^,]*)?(,\s*|$)/(?2:\t\tself.$2 = $2\n)/g} $0'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'aurm', code: '@auth.requires_membership(\'$0\'):'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'dbt', code: '${1:db_name}.define_table("${2:table_name}",\n SQLField("${3:field_name}", "${4:string/text/password/blob/upload/boolean/integer/double/time/date/datetime/db.reference_table}", ${5:length=$6}, ${7:default="$8"}),$9\n)'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'dbf', code: 'SQLField("${1:field_name}", "${2:string/text/password/blob/upload/boolean/integer/double/time/date/datetime/db.reference_table}", ${3:length=$4}, ${5:default="$6"}),$7'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'dbi', code: '${1:db_name}.${2:table_name}.insert(\n ${3:field_name}="$4" $5\n)'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 't', code: 'T("$0")'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'rev', code: 'response.view=\'$0\''}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'ref', code: 'response.flash=\'$0\''}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 're', code: 'redirect(\'$0\')'}; +eamy.snippets.push(snippet); +snippet = {tab_activation: 'rej', code: 'response.json=\'$0\''}; +eamy.snippets.push(snippet); ADDED applications/admin/static/eamy/chap-bg-sidebar.gif Index: applications/admin/static/eamy/chap-bg-sidebar.gif ================================================================== --- /dev/null +++ applications/admin/static/eamy/chap-bg-sidebar.gif cannot compute difference between binary files ADDED applications/admin/static/eamy/chap-bookmark-default.gif Index: applications/admin/static/eamy/chap-bookmark-default.gif ================================================================== --- /dev/null +++ applications/admin/static/eamy/chap-bookmark-default.gif cannot compute difference between binary files ADDED applications/admin/static/eamy/chap-folding-expand-inner.gif Index: applications/admin/static/eamy/chap-folding-expand-inner.gif ================================================================== --- /dev/null +++ applications/admin/static/eamy/chap-folding-expand-inner.gif cannot compute difference between binary files ADDED applications/admin/static/eamy/chap-folding-expand.gif Index: applications/admin/static/eamy/chap-folding-expand.gif ================================================================== --- /dev/null +++ applications/admin/static/eamy/chap-folding-expand.gif cannot compute difference between binary files ADDED applications/admin/static/eamy/chap-folding-start.gif Index: applications/admin/static/eamy/chap-folding-start.gif ================================================================== --- /dev/null +++ applications/admin/static/eamy/chap-folding-start.gif cannot compute difference between binary files ADDED applications/admin/static/eamy/chap-folding-stop.gif Index: applications/admin/static/eamy/chap-folding-stop.gif ================================================================== --- /dev/null +++ applications/admin/static/eamy/chap-folding-stop.gif cannot compute difference between binary files ADDED applications/admin/static/eamy/chap-wrapped-row.gif Index: applications/admin/static/eamy/chap-wrapped-row.gif ================================================================== --- /dev/null +++ applications/admin/static/eamy/chap-wrapped-row.gif cannot compute difference between binary files ADDED applications/admin/static/eamy/eamy.js Index: applications/admin/static/eamy/eamy.js ================================================================== --- /dev/null +++ applications/admin/static/eamy/eamy.js @@ -0,0 +1,8143 @@ +/* + * eAmy.Offline - Amy Editor embedded for offline use. + * http://www.april-child.com/amy + * + * Published under MIT License. + * Copyright (c) 2007-2008 Petr Krontorád, April-Child.com + + Permission is hereby granted, free of charge, to any person + obtaining a copy of this software and associated documentation + files (the "Software"), to deal in the Software without + restriction, including without limitation the rights to use, + copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the + Software is furnished to do so, subject to the following + conditions: + + The above copyright notice and this permission notice shall be + included in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + OTHER DEALINGS IN THE SOFTWARE. + + * + * + * This file is auto-generated from original Fry Framework and Amy Editor sources.. + */ + + + + + +/* + * AC Fry - JavaScript Framework v1.0 + * (c)2006 Petr Krontorad, April-Child.com + * Portions of code based on WHOA Bender Framework, (c)2002-2005 Petr Krontorad, WHOA Group. + * http://www.april-child.com. All rights reserved. + * See the license/license.txt for additional details regarding the license. + * Special thanks to Matt Groening and David X. Cohen for all the robots. + */ + +/* Reserving global `fry` object */ +var fry = +{ + version:1.0, + __production_mode:false +}; + +// String prototype enhancements +String.prototype.camelize = function() +{ + return this.replace( /([-_].)/g, function(){ return arguments[0].substr(1).toUpperCase();} ); +} + +String.prototype.decamelize = function() +{ + return this.replace( /([A-Z])/g, function(){ return '-'+arguments[0].toLowerCase();} ); +} + +String.prototype.trim = function() +{ + return this.replace(/(^\s*)|(\s*$)/g, '' ); +} + +String.prototype.stripLines = function() +{ + return this.replace( /\n/g, '' ); +} + +String.prototype.stripMarkup = function() +{ + return this.replace( /<(.|\n)+?>/g, '' ); +} + +String.prototype.replaceMarkup = function( charRep ) +{ + return this.replace( /(<(.|\n)+?>)/g, function() + { + var t = ''; + for ( var i=0; i/g, '>' ).replace( /' ).replace( /&/g, '&' ); +} + +String.prototype.surround = function(t, side) +{ + side = side || 3; + return (1==1&side?t:'')+this+(2==2&side?t:''); +} + +String.prototype.surroundTag = function(t) +{ + return '<'+t+'>'+this+''; +} + +// example of use: var pattern = '? is ?; alert(pattern.embed('Decin', 'sunny')); pattern = '@city is @weather'; alert(pattern.embed({weather:'cloudy', city:'Decin'})) +String.prototype.embed = function() +{ + var t = this; + if ( 1 == arguments.length && 'object' == typeof arguments[0] ) + { + // named placeholders + for ( var i in arguments[0] ) + { + eval('var re=/@'+i+'/g;'); + t = t.replace(re, arguments[0][i]); + } + } + else + { + // anonymous placeholders `?` + for ( var i=0; i opacity ) + { + opacity = 0; + } + if ( 1 < opacity ) + { + opacity = 1; + } + if ( $__tune.isIE ) + { + node.style.filter = 'alpha(opacity='+(100*opacity)+')'; + } + else + { + node.style.opacity = opacity; + node.style.MozOpacity = opacity; + } + }, + getPageScrollPosition:function() + { + var d = document.documentElement; + if ( d && d.scrollTop) + { + return [d.scrollLeft, d.scrollTop]; + } + else if (document.body) + { + return [document.body.scrollLeft, document.body.scrollTop]; + } + else + { + return [0, 0]; + } + } + }, + event: + { + get:function(evt, type) + { + if ( $notset(evt.target) ) + { + evt.target = evt.srcElement; + evt.stopPropagation = function() + { + window.event.cancelBubble = true; + }; + } + evt.stop = function() + { + evt.stopPropagation(); + evt.stopped = true; + } + evt.$ = $(evt.target); + if ( $notset(evt.pageX) ) + { + evt.pageX = evt.clientX + document.body.scrollLeft; + evt.pageY = evt.clientY + document.body.scrollTop; + } + evt.getOffsetX = function() + { + if ( $notset(evt.offsetX) ) + { + var pos = evt.$.abspos(); + evt.offsetX = evt.pageX - pos.x; + evt.offsetY = evt.pageY - pos.y; + } + return evt.offsetX; + } + evt.getOffsetY = function() + { + if ( $notset(evt.offsetY) ) + { + var pos = evt.$.abspos(); + evt.offsetX = evt.pageX - pos.x; + evt.offsetY = evt.pageY - pos.y; + } + return evt.offsetY; + } + evt.isAnyControlKeyPressed = function() + { + return evt.metaKey||evt.ctrlKey||evt.altKey||evt.shiftKey; + } + evt.KEY_ESCAPE = 27; + evt.KEY_ENTER = 13; + evt.KEY_ARR_RIGHT = 39; + evt.KEY_ARR_LEFT = 37; + evt.KEY_ARR_UP = 38; + evt.KEY_ARR_DOWN = 40; + return evt; + }, + addListener:function(node, type, listener) + { + if ( $__tune.isIE && node.attachEvent ) + { + node.attachEvent('on'+type, listener); + } + else + { + node.addEventListener(type, listener, false); + } + }, + removeListener:function(node, type, listener) + { + if ( node.detachEvent ) + { + node.detachEvent('on'+type, listener); + node['on'+type] = null; + } + else if ( node.removeEventListener ) + { + node.removeEventListener(type, listener, false); + } + } + }, + behavior: + { + disablePageScroll:function() + { + if ( $notset($__tune.__prop.page_scroll) ) + { + $__tune.__prop.page_scroll = [$().s().overflow, $().ga('scroll')]; + } + $().s('overflow:hidden').sa('scroll', 'no'); + }, + enablePageScroll:function() + { + $().s('overflow:auto').sa('scroll', 'yes'); + }, + disableCombos:function() + { + $().g('select', function(node) + { + node.sa('__dis_combo', node.s().visibility); + $(node).v(false); + }); + }, + enableCombos:function() + { + $().g('select', function(node) + { + node.s({visibility:node.ga('__dis_combo') || 'visible'}); + }); + }, + clearSelection:function() + { + try + { + if ( window.getSelection ) + { + if ( $__tune.isSafari ) + { + window.getSelection().collapse(); + } + else + { + window.getSelection().removeAllRanges(); + } + } + else + { + if ( document.selection ) + { + if ( document.selection.empty ) + { + document.selection.empty(); + } + else + { + if ( document.selection.clear ) + { + document.selection.clear(); + } + } + } + } + } + catch (e) {} + }, + makeBodyUnscrollable:function() + { + $().s('position:fixed').w(fry.ui.info.page.width); + } + }, + ui: + { + scrollbarWidth:-1!=navigator.appVersion.indexOf('intosh')?15:17 + }, + selection: + { + setRange:function(el, selectionStart, selectionEnd) + { + if (el.setSelectionRange) + { + el.focus(); + el.setSelectionRange(selectionStart, selectionEnd); + } + else if (el.createTextRange) + { + var range = el.createTextRange(); + range.collapse(true); + range.moveEnd('character', selectionEnd); + range.moveStart('character', selectionStart); + range.select(); + } + } + } +} +// some browsers masks its presence having Gecko string somewhere inside its userAgent field... +$__tune.isGecko = !$__tune.isSafari&&!$__tune.isIE&&-1!=navigator.userAgent.indexOf('ecko'); +$__tune.isSafari2 = $__tune.isSafari && -1 != navigator.appVersion.indexOf('Kit/4'); +$__tune.isSafari3 = $__tune.isSafari && -1 != navigator.appVersion.indexOf('Kit/5'); + + +// Node manipulations + +function ACNode(node) +{ + this.$ = node; + if ( node ) + { + node.setAttribute('fryis', '1'); + } +} +// `$$` creates new node +ACNode.prototype.$$ = function(tagName) +{ + return $$(tagName); +} +// *is* - tells whether node is a part of the active DOM tree (that is displayed on page). Node may exist only in memory before appending or after removing when references, in which case node.is() will return false. +ACNode.prototype.is = function() +{ + return this.$ && null != this.$.parentNode; +} +// *i*d +ACNode.prototype.i = function(id) +{ + if ( 'undefined' == typeof id ) + { + return this.$.id||''; + } + this.$.id = id; + return this; +} +// class *n*ame +ACNode.prototype.n = function(n) +{ + if ( 'undefined' == typeof n) + { + return this.$.className||''; + } + this.$.className = n; + return this; +} +// *e*vent listener, if called with one argument only, previously registered listeners are removed +ACNode.prototype.e = function(t, c, oneUseOnly) +{ + var ser_type_id = 'fryse-'+t; + if ( !c ) + { + if ( null != this.$.getAttribute(ser_type_id) ) + { + var ser_listeners = this.$.getAttribute(ser_type_id).split(','); + // console.log('*E* removing listeners for %s, listeners: %s', t, ser_listeners); + for ( var i=0; i h ) + { + this.$.style.fontSize = '1px'; + } + return this; +} +// *s*tyle information - argument can be either "{color:'red', backgroundColor:'blue'}" or "'color:red;background-color:blue'" +ACNode.prototype.s = function(s) +{ + if ( 'undefined' == typeof s ) + { + return this.$.style; + } + if ( 'object' == typeof s ) + { + for ( var n in s ) + { + this.$.style[n] = s[n]; + } + } + else if ( 'string' == typeof s ) + { + if ( '' != s ) + { + var styles = s.split(';'); + for ( var i=0; idiv>table>tbody>tr>td>` and node at `td` +// to return second div you would call `gp('tr/tbody/table/div')` or `tr/table/div:1`, first div could be acquired using `table/div:2` etc. you can use `*` for any node. +ACNode.prototype.gp = function(q) +{ + if ( 'string' == typeof q ) + { + q = q.split('/'); + } + var fq = []; + for ( var i=0; i to && to>=from ) + { + self.clearInterval(t); + } + else + { + c(i, control); + if ( control.stopped ) + { + self.clearInterval(t); + } + } + i++; + }, interval); +} +// $dotimes +// ======== +// Repeats embedded code n times. +/* Usage: + $dotimes(20, function(i) + { + // your code, i is the counter parameter + }) +*/ +var $dotimes = function(n, c) +{ + for ( var i=0; i i ) + { + control.skip(); + return; + } + tr.n(0==i%2 ? 'even' : 'odd'); + if ( 20 < i ) + { + control.stop(); + } + }) +*/ +var $foreach = function(o, c) +{ + if ( !o ) + { + c = null; + return; + } + if ( 'undefined' == typeof o.length && 'function' != typeof o.__length ) + { + c = null; + return; + } + var n = 'function' == typeof o.__length ? o.__length() : o.length; + var control = + { + stopped:false, + stop:function() + { + this.stopped = true; + }, + skipped:false, + skip:function() + { + this.skipped = true; + }, + removed:false, + remove:function(stopAfterwards) + { + this.removed = true; + this.stopped = true == stopAfterwards; + } + } + // cannot just extend Array.prototype for `item()` method due bug in IE6 iteration mechanism. Some day (>2010 :) this might get fixed and will become obsolete + for ( var i=0; i= evt.keyCode) + { + fry.keyboard.pushKey(evt.keyCode + 32, fry.keyboard.META_KEY); + evt.preventDefault(); + return true; + } + } + } + fry.keyboard.initialized = true; + fry.keyboard.start(); +} + +fry.keyboard.start = function() +{ + fry.keyboard.stopped = false; +} + +fry.keyboard.stop = function() +{ + fry.keyboard.stopped = true; +} + +fry.keyboard.disableTextfieldsEditation = function() +{ + fry.keyboard.allowTextfieldsEditation(true); +} + +fry.keyboard.allowTextfieldsEditation = function(disable) +{ + var lst = document.getElementsByTagName('input'); + var n = lst.length; + for (var i=0; i evt.keyCode)) + { + // control code + mask++; + } + if (!fry.keyboard.pushKey(code, mask)) + { + return true; + } + } + evt.preventDefault(); + evt.stopPropagation(); + return false; +} + +fry.keyboard.paste.ff_mac = function(evt) +{ + fry.keyboard.last_down_evt = null; + // catching Command+C, Command+X, it's a FF.mac hack + if (evt.metaKey && ((67 == evt.keyCode && 0 == evt.charCode && 67 == evt.which) || (88 == evt.keyCode && 0 == evt.charCode && 88 == evt.which))) + { + return fry.keyboard.shared.copy(evt); + } + else + { + return 86 == evt.keyCode && 0 == evt.charCode && 86 == evt.which && evt.metaKey; + } +} + +fry.keyboard.down.ff_mac = function(evt) +{ + return false; +} + +fry.keyboard.press.ff_mac = function(evt) +{ + if (null != fry.keyboard.last_down_evt) + { + return; + } + var mask = (evt.altKey ? 2 : 0) + (evt.ctrlKey ? 4 : 0) + (evt.shiftKey ? 8 : 0) + (evt.metaKey ? 16 : 0); + if (!evt.charCode || (evt.charCode == evt.keyCode)) + { + // control code + fry.keyboard.pushKey(evt.keyCode, 1 + mask); + } + else + { + if (!fry.keyboard.pushKey(evt.charCode, mask)) + { + return true; + } + } + evt.preventDefault(); + evt.stopPropagation(); + return false; +} + +fry.keyboard.paste.webkit = function(evt) +{ + if ($__tune.isMac) + { + return (86 == evt.keyCode && (0 == evt.charCode || 118 == evt.charCode) && evt.metaKey); + } + else + { + return (86 == evt.keyCode && (0 == evt.charCode || 118 == evt.charCode) && evt.ctrlKey); + } +} + +fry.keyboard.down.webkit = function(evt) +{ + if (0 != evt.keyCode && (48 > evt.keyCode || (111 < evt.keyCode && 128 > evt.keyCode) || 60000 < evt.charCode)) + { + var mask = (evt.altKey ? 2 : 0) + (evt.ctrlKey ? 4 : 0) + (evt.shiftKey ? 8 : 0) + (evt.metaKey ? 16 : 0); + if (!evt.charCode || 111 < evt.keyCode || 32 > evt.charCode || 60000 < evt.charCode) + { + // control code + fry.keyboard.pushKey(evt.keyCode, 1 + mask); + } + else + { + if (!fry.keyboard.pushKey(evt.charCode, mask)) + { + return true; + } + } + evt.preventDefault(); + evt.stopPropagation(); + fry.keyboard.last_down_evt = null; + return false; + } + fry.keyboard.last_down_evt = evt; + return true; +} + +fry.keyboard.press.webkit = function(evt) +{ + if (null != fry.keyboard.last_down_evt) + { + var mask = (evt.altKey ? 2 : 0) + (evt.ctrlKey ? 4 : 0) + (evt.shiftKey ? 8 : 0) + (evt.metaKey ? 16 : 0); + var code = !evt.keyCode ? evt.charCode : evt.keyCode; + if (evt.keyCode == evt.charCode && evt.keyCode == fry.keyboard.last_down_evt.charCode && evt.keyCode > 60000) + { + code = fry.keyboard.last_down_evt.keyCode; + } + if (evt.keyCode == fry.keyboard.last_down_evt.keyCode && 48 > evt.keyCode) + { + // control code + mask++; + } + else + { + var r_mask = fry.keyboard.SHIFT_KEY + fry.keyboard.META_KEY; + if (r_mask == (mask & r_mask) && 97 <= code && 122 >= code) + { + code -= 32; + } + } + if (!fry.keyboard.pushKey(code, mask)) + { + return true; + } + } + evt.preventDefault(); + evt.stopPropagation(); + return false; +} + +fry.keyboard.paste.ie = function(evt) +{ + if (evt.ctrlKey && (67 == evt.keyCode || 88 == evt.keyCode)) + { + // ctrl+c, ctrl+x + return fry.keyboard.shared.copy(evt); + } + else + { + return false; + } +} + +fry.keyboard.down.ie = function(evt) +{ + fry.keyboard.last_down_evt = evt; + if (48 > evt.keyCode || (111 < evt.keyCode && 128 > evt.keyCode)) + { + // control code for IE + var mask = 1 + (evt.altKey ? 2 : 0) + (evt.ctrlKey ? 4 : 0) + (evt.shiftKey ? 8 : 0) + (evt.metaKey ? 16 : 0); + return !fry.keyboard.pushKey(evt.keyCode, mask) + } + else + { + var code = evt.keyCode; + // disabling some other keys (A, F, N, R, S, T) + if (82 == evt.keyCode || 65 == evt.keyCode || 83 == evt.keyCode || 70 == evt.keyCode || 78 == evt.keyCode || 84 == evt.keyCode) + { + if (!evt.shiftKey) + { + code += 32; + } + var mask = (evt.altKey ? 2 : 0) + (evt.ctrlKey ? 4 : 0) + (evt.shiftKey ? 8 : 0) + (evt.metaKey ? 16 : 0); + return !fry.keyboard.pushKey(code, mask); + } + } + return true; +} + +fry.keyboard.press.ie = function(evt) +{ + if (null != fry.keyboard.last_down_evt) + { + var mask = (evt.altKey ? 2 : 0) + (evt.ctrlKey ? 4 : 0) + (evt.shiftKey ? 8 : 0) + (evt.metaKey ? 16 : 0); + return !fry.keyboard.pushKey(evt.keyCode, mask); + } + return false; +} + + +fry.keyboard.paste.opera = function(evt) +{ + return 86 == evt.keyCode && 86 == evt.which && evt.ctrlKey; +} + +fry.keyboard.down.opera = function(evt) +{ + fry.keyboard.last_down_evt = evt; + return false; +} + +fry.keyboard.press.opera = function(evt) +{ + var e = fry.keyboard.last_down_evt; + var mask = (evt.altKey ? 2 : 0) + (evt.ctrlKey ? 4 : 0) + (evt.shiftKey ? 8 : 0) + (evt.metaKey ? 16 : 0); + var prev_mask = (e.altKey ? 2 : 0) + (e.ctrlKey ? 4 : 0) + (e.shiftKey ? 8 : 0) + (e.metaKey ? 16 : 0); + if ((evt.keyCode == fry.keyboard.last_down_evt.keyCode || 0 == e.keyCode) && (0 == evt.which || 48 > e.keyCode || 111 < e.keyCode)) + { + mask++; + } + if (!fry.keyboard.pushKey(evt.keyCode, mask)) + { + return true; + } + evt.preventDefault(); + evt.stopPropagation(); + return false; +} + +fry.keyboard.addListener = function(listener) +{ + fry.keyboard.listener = listener; +} + +fry.keyboard.removeListener = function(listener) +{ + fry.keyboard.listener = null; +} + + +fry.keyboard.pushKey = function(code, mask) +{ + if (32 == code) + { + mask = mask & 65534; + } + var was_clipboard_copy = false; + var was_clipboard_cut = false; + if ($__tune.isMac) + { + was_clipboard_copy = (99 == code) && (fry.keyboard.META_KEY == (mask & fry.keyboard.META_KEY)); + was_clipboard_cut = (120 == code) && (fry.keyboard.META_KEY == (mask & fry.keyboard.META_KEY)); + } + else + { + was_clipboard_copy = (1 == code || 99 == code) && (fry.keyboard.CTRL_KEY == (mask & fry.keyboard.CTRL_KEY)); + was_clipboard_cut = (24 == code || 120 == code) && (fry.keyboard.CTRL_KEY == (mask & fry.keyboard.CTRL_KEY)); + } + if (was_clipboard_copy || was_clipboard_cut) + { + fry.keyboard.prepareClipboard(); + fry.keyboard.clipboard.copiedContent = ''; + var was_custom_content = false; + if (fry.keyboard.listener) + { + var content = fry.keyboard.listener(0, fry.keyboard.CONTROL_CODE | fry.keyboard.SIG_CLIPBOARD_GET); + if ('string' == typeof content) + { + was_custom_content = true; + fry.keyboard.clipboard.copiedContent = content; + } + } + if (was_custom_content) + { + fry.keyboard.clipboard.node.value = fry.keyboard.clipboard.copiedContent; + fry.keyboard.clipboard.node.select(); + fry.keyboard.clipboard.node.focus(); + } + fry.keyboard.pushKey(0, fry.keyboard.CONTROL_CODE | (was_clipboard_cut ? fry.keyboard.CUT : fry.keyboard.COPY)); + fry.keyboard.clipboard.content = fry.keyboard.clipboard.copiedContent; + // returning false will enforce propagation + return !was_custom_content; + } + if (fry.keyboard.PASTE == (mask & fry.keyboard.PASTE)) + { + fry.keyboard.clipboard.pastedContent = code; + fry.keyboard.clipboard.content = fry.keyboard.clipboard.pastedContent; + code = 0; + } + // filtering out solo-keys Ctrl, Shift, Alt that are triggered by some browsers. + if ((17 == code && 5 == (mask & 5)) || (16 == code && 9 == (mask & 9)) || (18 == code && 3 == (mask & 3))) + { + return true; + } + // filtering out Command+V on FF.mac + if (118 == code && 16 == mask) + { + return true; + } + if (fry.keyboard.listener) + { + // console.info(code); + if (13 != code && 0 != (mask & (fry.keyboard.CONTROL_CODE + fry.keyboard.META_KEY + fry.keyboard.CTRL_KEY))) + { + // some keystroke occured that we really want to know about the listener result, we have to call it immediatelly + return fry.keyboard.listener(code, mask); + } + else + { + // let's ease the pain of the browser + setTimeout('fry.keyboard.listener('+code+','+mask+')', 10); + } + } + else + { + fry.keyboard.buffer.unshift([code, mask]); + } + return true; +} + +fry.keyboard.popKey = function() +{ + return fry.keyboard.buffer.pop(); +} + +fry.keyboard.getClipboardContent = function() +{ + return fry.keyboard.clipboard.content; +} + + +/*--------*/ +var client = {conf:{fry:{backendURL:''}}}; +var eamy = +{ + snippets:[], + instances:[] +}; + +/* + * ac.Chap - Text Editing Component - Core + */ + +if ( 'undefined' == typeof ac ) +{ + var ac = {chap:{}}; +} + +ac.chap = +{ + state: + { + active:null + }, + + TOKEN_MULTIROW_COMMENT:0, + TOKEN_SINGLEROW_COMMENT:1, + TOKEN_SINGLE_QUOTED:2, + TOKEN_DOUBLE_QUOTED:3, + TOKEN_NEWROW:4, + TOKEN_WHITESPACE:5, + + ROWSTATE_NONE:0, + ROWSTATE_FOLD_START:1, + ROWSTATE_FOLD_STOP:2, + ROWSTATE_FOLD_EXPAND:4, + ROWSTATE_FOLD_COLLAPSED:8, + ROWSTATE_SELECTION:16, + ROWSTATE_BOOKMARK:32, + + CHUNK_KEYWORD:4, + CHUNK_NUMBER:5, + CHUNK_OPERATOR:6, + CHUNK_PARENTHESIS:7, + CHUNK_KEYWORD_CUSTOM:8, + CHUNK_FUNCTION_NAME:9, + CHUNK_LIBRARY:10, + CHUNK_LIBRARY_CUSTOM:11, + + ACTION_CARET:1, + ACTION_SELECTION:2, + ACTION_INSERT:3, + ACTION_UPDATE:4, + ACTION_DELETE:5, + ACTION_CLIPBOARD:6, + ACTION_UNDO:7, + ACTION_REDO:8, + ACTION_CUSTOM:9, + + ACTION_RES_REDRAWCARET:1, + ACTION_RES_REDRAWTEXT:2, + ACTION_RES_SELECTIONCHANGED:4, + ACTION_RES_SCROLLTOCARET:8, + + CKEY_NONE:0, + CKEY_ALT:2, + CKEY_CTRL:4, + CKEY_SHIFT:8, + CKEY_META:16, + + TRANSLOG_TYPE_INSERT:1, + TRANSLOG_TYPE_REMOVE:2, + + ACTION_LISTENER_BEFORE:1, + ACTION_LISTENER_AFTER:2, + ACTION_LISTENER_BOTH:3 + +} + + + +ac.chap.activeComponent = null; +ac.chap.instanceId = 1; + +ac.chap.getActiveComponent = function() +{ + return ac.chap.activeComponent; +} + +ac.chap.setActiveComponent = function(component) +{ + fry.keyboard.initialize(); + if (null != ac.chap.activeComponent) + { + ac.chap.activeComponent.blur(); + } + ac.chap.activeComponent = component; + if (null != component) + { + if (ac.widget) + { + ac.widget.focus(component); + } + ac.chap.activeComponent.focus(); + } + else + { + if (!ac.widget) + { + fry.keyboard.stop(); + } + } +} + +ac.chap.route = function(type, windowId, viewIndex, pars) +{ + if ( null == ac.chap.activeComponent ) + { + return; + } + if ( 'undefined' == typeof ac.chap.activeComponent.views[viewIndex] ) + { + return; + } + switch ( type ) + { + case 'expand-folding': + { + ac.chap.activeComponent.expandFolding(pars); + } + } +} + +ac.chap.caretThread = setInterval(function() +{ + if (null != ac.chap.activeComponent) + { + ac.chap.activeComponent.showCaret(true, true); + } +}, 600); + +$(document.documentElement).e($__tune.isSafari2?'mousedown':'click', function(evt) +{ + var elem = evt.$.$; + while ( null != elem && document.documentElement != elem ) + { + if ( 'true' == elem.getAttribute('chap-view') ) + { + evt.stop(); + return; + } + elem = elem.parentNode; + } + ac.chap.setActiveComponent(null); +}); + + +ac.chap.keyboardListener = function(code, mask) +{ + if (null == ac.chap.activeComponent) + { + return; + } + return ac.chap.activeComponent.standaloneKeyboardListener(code, mask); +} +if ('undefined' == typeof ac['widget']) +{ + // chap is not a part of Fry MVC, must handle keyboardListener itself + fry.keyboard.addListener(ac.chap.keyboardListener); +} + +$class('ac.chap.Window', +{ + construct:function(options, userId) + { + this.instanceId = ac.chap.instanceId++; + this.ident = 'ac-chap-' + this.instanceId; + this.userId = userId | 0; + this.caret = null; + this.options = null; + this.state = null; + + this.views = []; + this.activeView = null; + this.viewLayoutNodes = []; + + this.char_map = []; + this.row_id_map = []; + this.syntax_map = []; + this.style_map = []; + + this.row_id_sequence = 1; + + this.language = null; + this.keymap = null; + this.snippets = []; + this.commands = []; + + this.selection = null; + this.transaction_log = []; + this.redo_log = []; + + this.setOptions(options||{}); + this.setState(); + }, + destruct:function() + { + $delete(this.state); + $delete(this.options); + $delete(this.char_map); + $delete(this.row_id_map); + $delete(this.syntax_map); + $delete(this.style_map); + this.hide(); + $delete(this.activeView); + } +}); + +ac.chap.Window.prototype.focus = function() +{ + this.showCaret(); +} + +ac.chap.Window.prototype.blur = function() +{ + this.hideCaret(); +} + +// compatibility layer with AC Fry Widget library +ac.chap.Window.prototype.onFocus = function() +{ + ac.chap.setActiveComponent(this); + this.focus(); +} + +ac.chap.Window.prototype.onBlur = function() +{ + ac.chap.setActiveComponent(null); + this.blur(); +} + +ac.chap.Window.prototype.onResize = function(width, height) +{ +} + +ac.chap.Window.prototype.onSystemClipboardCopy = function() +{ + return this.getSelection(); +} + +ac.chap.Window.prototype.onSystemClipboardCut = function() +{ + this.runAction(ac.chap.ACTION_CLIPBOARD, {cut:true}); + return this.processActionResult(true, true); +} + +ac.chap.Window.prototype.onSystemClipboardPaste = function(content) +{ + this.runAction(ac.chap.ACTION_CLIPBOARD, {paste:true, content:content}); + return this.processActionResult(true, true); +} + +ac.chap.Window.prototype.hasKeyboardListenerActive = function() +{ + return true; +} +ac.chap.Window.prototype.onCut = function(selection, callbackOk) +{ +} + +ac.chap.Window.prototype.onPaste = function(selection, wasCut) +{ +} + +ac.chap.Window.prototype.setOptions = function(options) +{ + this.options = + { + initialCaretPosition:[0,0], + tokenizerLazyLaunch:900, + syntaxHighlightingEnabled:true, + remoteBackendURL:'', + font:{ + size:11, + family: $__tune.isMac ? "Consolas, 'Bitstream Vera Sans mono', 'Courier', 'Monaco', monospaced" : "Consolas, 'Courier New', 'Courier', monospaced", + allowedSizes: [8, 9, 10, 11, 12, 13, 14, 17, 21, 24, 27, 30, 34, 38, 42] + } + }; + if ( $isset(options.initial_caret_position) ) + { + this.options.initialCaretPosition = [options.initial_caret_position[0], options.initial_caret_position[1]]; + } + if ( $isset(options.language) ) + { + this.language = $new(options.language); + } + else + { + this.language = $new(ac.chap.Language); + } + if ( $isset(options.keymap) ) + { + this.keymap = $new(options.keymap); + } + else + { + this.keymap = $new(ac.chap.KeyMap); + } + if ( $isset(options.syntaxHighlightingEnabled) ) + { + this.options.syntaxHighlightingEnabled = options.syntaxHighlightingEnabled; + } + if ( $isset(options.remoteBackendURL) ) + { + this.options.remoteBackendURL = options.remoteBackendURL; + } + else + { + if ( client && client.conf && client.conf.fry ) + { + this.options.remoteBackendURL = client.conf.fry.backendURL; + } + } + if ($isset(options.font)) + { + if ($isset(options.font['size'])) + { + this.options.font.size = options.font.size; + } + if ($isset(options.font['family'])) + { + this.options.font.family = options.font.family; + } + } +} + +ac.chap.Window.prototype.setState = function() +{ + this.state = + { + lastKeyTimePressed:0, + caretPhase:1, + lastKeyCode:0, + lastControlKey:0, + lastCaretPosition:[], + tokenizerTimer:null, + scheduledTokenizerTime:0, + transactionLogStopped:false, + actionListeners:[], + actionListenersStopped:false, + caretListener:null, + commandListener:null, + transactionListener:[null,800], + passThroughKeysListener:null + } + this.caret = + { + position:[this.options.initialCaretPosition[0], this.options.initialCaretPosition[1]], + mode:1 // 1 normal, 2 overwrite + } +} + +ac.chap.Window.prototype.addView = function(layoutNode, options, renderAfter) +{ + var view_index = this.views.length; + this.viewLayoutNodes.push(layoutNode); + this.views.push($new(ac.chap.View, this, view_index, options||{})); + this.row_id_map[view_index] = []; + if ( 0 < view_index ) + { +// console.log(view_index); + // creating duplicate + var n = this.row_id_map[0].length; + for ( var i=0; i= 0; i--) + { + if (font_size > font_sizes[i]) + { + font_size = font_sizes[i]; + break; + } + } + } + else + { + if (font_sizes[0] <= value && value <= font_sizes[font_sizes.length-1]) + { + font_size = value; + } + } + this.options.font.size = font_size; + redraw = true; + } + else if ('font.family' == key) + { + this.options.font.family = value; + redraw = true; + } + else if ('word.wrap' == key) + { + if (this.activeView) + { + this.hideCaret(); + this.activeView.options.wordWrap = value; + this.activeView.reloadOptions(); + this.showCaret(); + } + } + if (redraw) + { + this.hideCaret(); + var num_views = this.views.length; + for (var i=0; i caret_col ) + { + caret_col++; + } + else + { + if ( 'undefined' != typeof this.char_map[caret_row+1] ) + { + caret_row++; + caret_col = 0; + } + } + this.setCaretPosition(caret_row, caret_col); + return ac.chap.ACTION_RES_REDRAWCARET; + } + else if ( 'up' == direction ) + { + if ( 0 < caret_row ) + { + var move_end = this.char_map[caret_row].length == caret_col; + if ( move_end ) + { + caret_col = this.char_map[caret_row-1].length; + } + else + { + caret_col = Math.min(this.char_map[caret_row-1].length, caret_col); + } + this.setCaretPosition(caret_row-1, caret_col); + return ac.chap.ACTION_RES_REDRAWCARET; + } + } + else if ( 'down' == direction ) + { + if ( 'undefined' != typeof this.char_map[caret_row+1] ) + { + var move_end = this.char_map[caret_row].length == caret_col; + if ( move_end ) + { + caret_col = this.char_map[caret_row+1].length; + } + else + { + caret_col = Math.min(this.char_map[caret_row+1].length, caret_col); + } + this.setCaretPosition(caret_row+1, caret_col); + return ac.chap.ACTION_RES_REDRAWCARET; + } + } + else if ( 'prev_word' == direction ) + { + if ( 0 < caret_col ) + { + var ch = this.char_map[caret_row].charAt(caret_col-1); + var re = this.language.wordDelimiter; + var look_for_wch = re.test(ch); + while ( 0 != caret_col ) + { + ch = this.char_map[caret_row].charAt(caret_col-1); + if ( look_for_wch != re.test(ch) ) + { + break; + } + caret_col--; + } + } + else + { + if ( 0 < caret_row ) + { + caret_row--; + caret_col = this.char_map[caret_row].length; + } + } + this.setCaretPosition(caret_row, caret_col); + return ac.chap.ACTION_RES_REDRAWCARET; + } + else if ( 'next_word' == direction ) + { + if ( this.char_map[caret_row].length > caret_col ) + { + var ch = this.char_map[caret_row].charAt(caret_col); + var re = this.language.wordDelimiter; + var look_for_wch = re.test(ch); + while ( this.char_map[caret_row].length > caret_col ) + { + ch = this.char_map[caret_row].charAt(caret_col); + if ( look_for_wch != re.test(ch) ) + { + break; + } + caret_col++; + } + } + else + { + if ( 'undefined' != typeof this.char_map[caret_row+1] ) + { + caret_row++; + caret_col = 0; + } + } + this.setCaretPosition(caret_row, caret_col); + return ac.chap.ACTION_RES_REDRAWCARET; + } + else if ( 'prev_regexp' == direction ) + { + if ( 0 < caret_col ) + { + var row = this.char_map[caret_row].substring(0, caret_col); + var re = new RegExp(params['re'].replace('|', '\\')); + var matches = re.exec(row); + if (0 == matches.length) + { + console.warning('Invalid RE definition for `prev_regexp\' direction in ACTION_CARET.move action in keymap.'); + caret_col--; + } + else + { + caret_col -= matches[0].length + 1; + } + } + else + { + if ( 0 < caret_row ) + { + caret_row--; + caret_col = this.char_map[caret_row].length; + } + } + this.setCaretPosition(caret_row, caret_col); + return ac.chap.ACTION_RES_REDRAWCARET; + } + else if ( 'next_regexp' == direction ) + { + if ( this.char_map[caret_row].length > caret_col ) + { + var row = this.char_map[caret_row].substr(caret_col + 1); + var re = new RegExp(params['re'].replace('|', '\\')); + var matches = re.exec(row); + if (0 == matches.length) + { + console.warning('Invalid RE definition for `next_regexp\' direction in ACTION_CARET.move action in keymap.'); + caret_col++; + } + else + { + caret_col += matches[0].length + 1; + } + } + else + { + if ( 'undefined' != typeof this.char_map[caret_row+1] ) + { + caret_row++; + caret_col = 0; + } + } + this.setCaretPosition(caret_row, caret_col); + return ac.chap.ACTION_RES_REDRAWCARET; + } + else if ( 'row_start' == direction ) + { + if ( 0 < caret_col ) + { + caret_col = 0; + this.setCaretPosition(caret_row, caret_col); + return ac.chap.ACTION_RES_REDRAWCARET; + } + } + else if ( 'row_end' == direction ) + { + if ( this.char_map[caret_row].length > caret_col ) + { + caret_col = this.char_map[caret_row].length; + this.setCaretPosition(caret_row, caret_col); + return ac.chap.ACTION_RES_REDRAWCARET; + } + } + else if ( 'page_up' == direction ) + { + if (this.activeView) + { + var row = caret_row - this.activeView.numRows; + if (0 > row) + { + row = 0; + } + this.setCaretPosition(row, 0 != caret_col ? this.char_map[row].length : 0); + return ac.chap.ACTION_RES_REDRAWCARET; + } + return 0; + } + else if ( 'page_down' == direction ) + { + if (this.activeView) + { + var row = caret_row + this.activeView.numRows; + if (this.char_map.length <= row) + { + row = this.char_map.length-1; + } + this.setCaretPosition(row, 0 != caret_col ? this.char_map[row].length : 0); + return ac.chap.ACTION_RES_REDRAWCARET; + } + return 0; + } + else if ( 'doc_start' == direction ) + { + this.setCaretPosition(0,0); + return ac.chap.ACTION_RES_REDRAWCARET; + } + else if ( 'doc_end' == direction ) + { + var last_index = this.char_map.length-1 + this.setCaretPosition(last_index, this.char_map[last_index].length-1); + return ac.chap.ACTION_RES_REDRAWCARET; + } + } + else if ( $isset(params.moveBy) ) + { + var offset = params.moveBy; + if ( 'column' == offset ) + { + //move by params.value columns, newlines are counted as column, params.value may be negative indication caret moving to the left + if ( 0 < params.value ) + { + var range_source = (this.char_map[caret_row].substr(caret_col)+'\n'+this.char_map.slice(caret_row+1).join('\n')).substr(0, params.value); + range_source = range_source.split('\n'); + caret_row += range_source.length-1; + caret_col = range_source[range_source.length-1].length + (1==range_source.length ? caret_col : 0); + } + else + { + var range_source = (this.char_map.slice(0, caret_row).join('\n')+'\n'+this.char_map[caret_row].substr(0, caret_col)); + range_source = range_source.substr(range_source.length+params.value); + range_source = range_source.split('\n'); + caret_row -= (range_source.length-1); + caret_col = (1==range_source.length ? caret_col : this.char_map[caret_row].length) - range_source[0].length; + } + this.setCaretPosition(caret_row, caret_col); + return ac.chap.ACTION_RES_REDRAWCARET; + } + else if ( 'row' == offset ) + { + // move by params.value rows + } + else if ( 'page' == offset ) + { + // move by params.value pages + } + } + else if ( $isset(params.moveTo) ) + { + // move to params.moveTo[0], params.moveTo[1] + this.setCaretPosition(params.moveTo[0], params.moveTo[1]); + return ac.chap.ACTION_RES_REDRAWCARET; + } + };break; + case ac.chap.ACTION_SELECTION: + { + if ( $isset(params.remove) ) + { + var changed = this.removeSelection(); + return ac.chap.ACTION_RES_REDRAWCARET | (changed ? ac.chap.ACTION_RES_REDRAWTEXT : 0); + } + else if ( $isset(params.add) ) + { + this.addSelection([caret_row, caret_col], this.state.lastCaretPosition); + this.renderSelection(); + return ac.chap.ACTION_RES_REDRAWCARET | ac.chap.ACTION_RES_SELECTIONCHANGED; + } + else if ( $isset(params.all) ) + { + $__tune.behavior.clearSelection(); + this.addAllSelection(); + this.renderSelection(); + return ac.chap.ACTION_RES_REDRAWCARET | ac.chap.ACTION_RES_SELECTIONCHANGED; + } + };break; + case ac.chap.ACTION_INSERT: + { + var str = null; + if ( $isset(params.row) ) + { + var ins_content = '\n'; + caret_col = 0; + // if ( 0 < caret_row ) + // { + // // indenting by previous row + // var t = this.char_map[caret_row]; + // var n = t.length; + // var re = this.language.indentIgnoreMarker; + // while ( caret_col width ) + { + // will go before [row,column] + source = this.char_map.slice(0, row).join('\n')+'\n'+this.char_map[row].substr(0, column); + return source.substr(source.length+width); + } + else + { + // will go after [row,column] + source = this.char_map.slice(row).join('\n').substr(column); + return source.substr(0, width); + } +} + +ac.chap.Window.prototype.getWordAt = function(row, column, numWords) +{ + // if numWords <0 returns words before otherwise after position. if omitted, default value is -1 that is word before caret + // also, if more than one word is required, returns array of words as result + row = $getdef(row, this.caret.position[0]); + column = $getdef(column, this.caret.position[1]); + numWords = $getdef(numWords, -1); + var words = []; + var re = this.language.wordDelimiter; + var required_words = numWords; + var direction_after = 0 < numWords; + var next_word = true; + required_words = Math.abs(-numWords); + if ( !direction_after ) + { + column--; + if ( -1 == column ) + { + row--; + if ( -1 == row ) + { + return words; + } + column = this.char_map[row].length-1; + } + } + while (true) + { + var ch = this.char_map[row].charAt(column) + if ( re.test(ch) ) + { + if ( next_word ) + { + words.push(''); + next_word = false; + } + // word character found + if ( direction_after ) + { + words[words.length-1] += ch; + } + else + { + words[words.length-1] = ch + words[words.length-1]; + } + } + else + { + if ( required_words == words.length ) + { + break; + } + next_word = true; + } + + column += (direction_after ? 1 : -1); + if ( 0 > column ) + { + row--; + if ( -1 == row ) + { + break; + } + next_word = true; + column = this.char_map[row].length-1; + } + else if ( this.char_map[row].length <= column ) + { + row++; + if ( this.char_map.length == row ) + { + break; + } + next_word = true; + column = 0; + } + } + if ( 1 == required_words ) + { + return words[0] ? words[0] : false; + } + return words; +} + +ac.chap.Window.prototype.getLineAt = function(row) +{ + return this.char_map[row]; +} + +ac.chap.Window.prototype.getText = function() +{ + return this.char_map.join('\n'); +} + +ac.chap.Window.prototype.getNumRows = function() +{ + return this.char_map.length; +} + +ac.chap.Window.prototype.getSyntaxHighlightingSource = function() +{ + if (null != this.activeView) + { + return this.activeView.getSyntaxHighlightingSource(); + } + return 'ni'; +} + +ac.chap.Window.prototype.getCaretAbsolutePosition = function() +{ + if ( null != this.activeView ) + { + var pos = this.activeView.getRenderedCharPosition(this.caret.position[0], this.caret.position[1]); + if ( null != pos ) + { + var root_pos = this.activeView.nodeScrollArea.abspos(); + return [pos[0]+root_pos.x+this.activeView.options.colWidth, pos[1]+root_pos.y+this.activeView.options.rowHeight]; + } + } + return null; +} + +ac.chap.Window.prototype.stopTransactionLog = function() +{ + this.state.transactionLogStopped = true; +} + +ac.chap.Window.prototype.startTransactionLog = function() +{ + this.state.transactionLogStopped = false; +} + +ac.chap.Window.prototype.addAllSelection = function() +{ + var num_rows = this.char_map.length; + var num_views = this.views.length; + for ( var i=0; i offset_x - mid_char_w ) + { + col_index = i; + break; + } + else if ( w - mid_char_w < offset_x && (dim[0] % w + 2*mid_char_w >= offset_x)) + { + // last char + col_index = i+1; + break; + } + } + i++; + } +// console.log('%s, %s', row_index, col_index); + if ( i == num_chars ) + { + col_index = i; + } +// console.log('CHANGE CARET to: %s', col_index); + this.hideCaret(); + if ( evt.shiftKey ) + { + this.addSelection([row_index, col_index], this.state.lastCaretPosition); + this.renderText(); + } + else + { + this.setCaretPosition(row_index, col_index); + this.state.caretPhase = 1; + view.showCaret(); + this.state.lastCaretPosition = [this.caret.position[0], this.caret.position[1]]; + if ( this.removeSelection() ) + { + this.renderText(); + } + } + ac.chap.setActiveComponent(this); +} + +ac.chap.Window.prototype.foldingize = function() +{ + var startRowIndex = 0; + + var source_rows = this.char_map.slice(startRowIndex); + + // creating folding info + var n = source_rows.length; + var foldings = []; + var foldings_index = -1; + for ( var i=0; i ixs[i][1] ) + { + found_marker_index = i; + lowest = ixs[i][1]; + } + } + } + if ( -1 == found_marker_index ) + { + break; + } + var start_index = ixs[found_marker_index][1]; + var skipped_source = source.substr(0, start_index); + var num_skipped_rows = skipped_source.split('\n').length; + cursor.row += num_skipped_rows - 1; + cursor.col = (1 == num_skipped_rows ? col_offset : 0) + skipped_source.length - ('\n'+skipped_source).lastIndexOf('\n'); + + if ( 'undefined' == typeof syntax_map[cursor.row] ) + { + syntax_map[cursor.row] = []; + } + + var start_marker_len = ixs[found_marker_index][2].length; + var end_marker_len = ixs[found_marker_index][3].length; + source = source.substr(start_index+start_marker_len); + + var token_type = ixs[found_marker_index][0]; + + var end_index = source.indexOf(ixs[found_marker_index][3]); + var sub_source = source; + var end_index_offset = 0; + var except = false; + while ( 0 < end_index && '' != ixs[found_marker_index][4] && ixs[found_marker_index][4] == sub_source.charAt(end_index-end_marker_len) ) + { + except = true; + end_index_offset += end_index + end_marker_len; + sub_source = sub_source.substr(end_index+end_marker_len); + end_index = sub_source.indexOf(ixs[found_marker_index][3]); + } + if ( except && -1 != end_index ) + { + end_index += end_index_offset; + } + if ( -1 == end_index ) + { + syntax_map[cursor.row].push([token_type, cursor.col, -1, '']); + fillRowTokens(token_type, cursor.row+1, -1); + break; + } + else + { + var block_source = source.substr(0, end_index); + var num_block_rows = '\n' == ixs[found_marker_index][3] ? 1 : block_source.split('\n').length; + var cursor_col_end = block_source.length - ('\n'+block_source).lastIndexOf('\n'); + + syntax_map[cursor.row].push([token_type, cursor.col, 1 == num_block_rows ? (cursor.col+end_index+start_marker_len+end_marker_len) : -1, ixs[found_marker_index][2]]); + fillRowTokens(token_type, cursor.row+1, cursor.row+num_block_rows-1); + if ( 1 == num_block_rows ) + { + col_offset = cursor.col + end_index + start_marker_len + end_marker_len; + if ( '\n' == ixs[found_marker_index][3] ) + { + cursor.row++; + col_offset = 0; + } + } + else + { + if ( 'undefined' == typeof syntax_map[cursor.row+num_block_rows] ) + { + syntax_map[cursor.row+num_block_rows-1] = []; + } + syntax_map[cursor.row+num_block_rows-1].push([token_type, -1, cursor_col_end + end_marker_len, '']); +// var a = block_source.split('\n'); + col_offset = cursor_col_end + end_marker_len; + cursor.row += num_block_rows -1; + } +// console.log(num_block_rows); + source = source.substr(end_index+end_marker_len); + } + } + delete ixs; + delete source; + + var n = Math.max(syntax_map.length, this.syntax_map.length); + for ( i=0; i'; + } + } + return ht; + } + var nodes = this.nodeEditArea.childNodes; + var ht = ''; + for (var i=0; i') ) + { + str = str.replace(/>/g, '>'); + } + if ( -1 != str.indexOf('<') ) + { + str = str.replace( / 1 2 3 =  1 2 3 +function ch_encode_markup_spaces(str) +{ + var n = str.length - str.replace(/ /g, '').length; + for ( var i=0; i/g, '').length); + return arguments[1]+(is_inside?'~`~`~`~`':' '); + }); + } + return str.replace(/~`~`~`~`/g, ' '); +} + + +ac.chap.View.prototype.getRenderedCharDimension = function(rowIndex, colIndex) +{ + return [this.options.colWidth, this.options.rowHeight]; +} + +ac.chap.View.prototype.getRenderedStringDimension = function(rowIndex, colIndex, width) +{ + if ( 'undefined' != typeof this.window.char_map[rowIndex] ) + { + if ( colIndex < this.window.char_map[rowIndex].length ) + { + var str = this.window.char_map[rowIndex].substr(colIndex, width); + var ix = 0; + var tab = this.options.tabelator; + while ( -1 != ix ) + { + ix = str.indexOf('\t'); + if ( -1 != ix ) + { + str = str.substr(0,ix)+tab.substr(0, tab.length-(ix % tab.length))+str.substr(ix+1); + } + } +// console.log('(getrenderedstringdimension) = [%s], ix:%s w:%s %s', this.options.colWidth*str.length, colIndex, width, str); + return [this.options.colWidth*str.length, this.options.rowHeight]; + } + } + return [0,0]; +} + +ac.chap.View.prototype.getVirtualStringDimension = function(row, colIndex, width) +{ + if ( colIndex < row.length ) + { + var str = row.substr(colIndex, width); + var ix = 0; + var tab = this.options.tabelator; + while ( -1 != ix ) + { + ix = str.indexOf('\t'); + if ( -1 != ix ) + { + str = str.substr(0,ix)+tab.substr(0, tab.length-(ix % tab.length))+str.substr(ix+1); + } + } +// console.log('(getrenderedstringdimension) = [%s], ix:%s w:%s %s', this.options.colWidth*str.length, colIndex, width, str); + return [this.options.colWidth*str.length, this.options.rowHeight]; + } + return [0,0]; +} + +ac.chap.View.prototype.getRenderedCharPosition = function(rowIndex, colIndex) +{ + var node_row = this.getRowNode(rowIndex); + if ( null != node_row && null != node_row.parentNode ) + { + var offset_x = this.getRenderedStringDimension(rowIndex, 0, colIndex)[0]; + var offset_y = 0; + var dim = this.getRenderedCharDimension(rowIndex, colIndex); + offset_x -= dim[0]; + if ( this.options.wordWrap ) + { + if ( 0 < colIndex ) + { + var w = this.options.colWidth * (this.numCols); + offset_y = this.options.rowHeight * (Math.floor(offset_x/w)); + offset_x = (offset_x) % w; + } + } + return [offset_x, node_row.offsetTop+offset_y, node_row]; + } + return null; +} + +ac.chap.View.prototype.getRowNode = function(rowIndex) +{ + return document.getElementById('row-'+this.window.instanceId+'-'+this.index+'-'+rowIndex); +} + +ac.chap.View.prototype.getVirtualCharPosition = function(nodeRow, row, colIndex) +{ + var offset_x = this.getVirtualStringDimension(row, 0, colIndex)[0]; + var offset_y = 0; + var dim = this.getRenderedCharDimension(0, colIndex); + offset_x -= dim[0]; + if ( this.options.wordWrap ) + { + if ( 0 < colIndex ) + { + var w = this.options.colWidth * (this.numCols); + offset_y = this.options.rowHeight * (Math.floor(offset_x/w)); + offset_x = (offset_x) % w; + } + } + return [offset_x, nodeRow.offsetTop+offset_y]; +} + +ac.chap.View.prototype.showCaret = function(skipScroll) +{ + var caret_row = this.window.caret.position[0]; + var caret_col = this.window.caret.position[1]; + + pos = this.getRenderedCharPosition(caret_row, caret_col); + if ( null != pos ) + { + // caret is visible + var node_row = pos[2]; + var node = document.getElementById('ac-chap-caret-'+this.window.instanceId); + if ( null != node ) + { + node.parentNode.removeChild(node); + } + if ( 1 == this.window.state.caretPhase ) + { + // displaying caret + node = document.createElement('div'); + node.id = 'ac-chap-caret-'+this.window.instanceId; + node.style.position = 'absolute'; + node.style.font = '1px arial'; // IE + node.style.width = this.options.colWidth + 'px'; + node.style.height = this.options.rowHeight + 'px'; + pos[2] = this.options.colWidth; + pos[3] = this.options.rowHeight; + pos = this.theme.adjustCaretPosition(this.window.caret.mode, pos); + node.style.left = pos[0]+'px'; + node.style.top = pos[1]+'px'; + this.theme.renderCaret(this.window.caret.mode, node); + this.nodeCaret = node_row.appendChild(node); + node_row.style.background = this.theme.caretRowStyleActive; + + if ( !skipScroll ) + { + // might be out of borders, at least partially + if ( 0 > node_row.offsetTop - (this.nodeScrollArea.$.scrollTop % this.options.rowHeight) ) + { + // top margin overlay, first rendered row is partially hidden + this.scrollToRow(caret_row); + } + else if ( node_row.offsetTop > this.options.rowHeight*(this.numRows-1)-$__tune.ui.scrollbarWidth ) + { + // bottom margin overlay + this.scrollToRow(caret_row-Math.floor(this.numRows/2)); + } + } + this.nodeCaretRow = node_row; + } + if ('undefined' != typeof this.state.lastCaretRowIndex && this.state.lastCaretRowIndex != caret_row) + { + var last_node_row = this.getRowNode(this.state.lastCaretRowIndex); + if (last_node_row) + { + last_node_row.style.background = 'transparent'; + } + } + this.state.lastCaretRowIndex = caret_row; + } + else + { + if ( !skipScroll ) + { + // scrolling into view + this.scrollToRow(caret_row - Math.floor(this.numRows/2)); + } + } +} + +ac.chap.View.prototype.hideCaret = function(skipCaretRow) +{ + if ( null != this.nodeCaret && null != this.nodeCaret.parentNode ) + { + this.nodeCaret.parentNode.removeChild(this.nodeCaret); + this.nodeCaret = null; + } + if ( !skipCaretRow && null != this.nodeCaretRow ) + { +// console.log('off(hide) caret line background for %s', this.nodeCaretRow.id); + this.nodeCaretRow.style.background = 'transparent'; + } +// console.log('hide caret'); +} + +ac.chap.View.prototype.scrollToRow = function(rowIndex, setCaretToo, dontRefreshCaret) +{ + this.nodeScrollArea.$.scrollTop = this.options.rowHeight * rowIndex - Math.floor(this.nodeRoot.$.offsetHeight/3); + if (setCaretToo) + { + this.window.runAction(ac.chap.ACTION_CARET, {moveTo:[rowIndex, 0]}); + this.window.runAction(ac.chap.ACTION_CARET, {move:'row_end'}); + } + if (!dontRefreshCaret) + { + this.window.state.caretPhase = 1; + this.showCaret(true); + } +} + +ac.chap.View.prototype.expandFolding = function(rowIndex) +{ + if ( 'undefined' == typeof this.window.row_id_map[this.index][rowIndex] ) + { + return; + } + var row_state = this.window.row_id_map[this.index][rowIndex][2]; + if (0 == (ac.chap.ROWSTATE_FOLD_EXPAND & row_state)) + { + return; + } + var end_row_index = this.window.row_id_map[this.index][rowIndex][3][1]; + this.window.row_id_map[this.index][rowIndex][2] &= (65535 - ac.chap.ROWSTATE_FOLD_EXPAND); + this.window.row_id_map[this.index][rowIndex][1] = false; + for ( var i=rowIndex+1; i<=end_row_index; i++ ) + { + this.window.row_id_map[this.index][i][1] = false; + this.window.row_id_map[this.index][i][2] &= (65535 - ac.chap.ROWSTATE_FOLD_COLLAPSED); + } + this.recalculateVisibleRows(); + var me = this; + // console.log('expanding: %i, start: %i', rowIndex, end_row_index); + $runafter(40, function(){me.renderText(true)}); +} + +ac.chap.View.prototype.resize = function() +{ + var h = this.nodeRoot.p().h(); + this.nodeRoot.h(h); + $(this.nodeSidebar).h(h); + this.nodeScrollArea.h(h); + this.nodeFillArea.h(h-$__tune.ui.scrollbarWidth); + $(this.nodeSelectionArea).h(h-$__tune.ui.scrollbarWidth+this.options.rowHeight); + this.recalculateNumRows(); + this.recalculateVisibleRows(); + this.renderText(true); +} + +ac.chap.View.prototype.reloadOptions = function() +{ + this.calculateColRowDim(); + this.recalculateNumCols(false, true); + this.recalculateNumRows(); + this.recalculateVisibleRows(); + this.renderSidebarStub(); + this.renderText(true); +} + +ac.chap.View.prototype.recalculateNumCols = function(node, withoutScrollbar) +{ + node = node || this.nodeRoot; + var w = node.$.offsetWidth; + if (withoutScrollbar) + { + w -= $__tune.ui.scrollbarWidth+61; + } + this.numCols = Math.floor(w/this.options.colWidth); +} + +ac.chap.View.prototype.recalculateNumRows = function(node) +{ + node = node || this.nodeRoot; + this.numRows = Math.floor(node.$.offsetHeight/this.options.rowHeight); +} + +ac.chap.View.prototype.showInteractiveSearch = function() +{ + this.hideInteractiveSearch(); + var pos = this.nodeRoot.abspos(); + var node = $().a($$()).pos(true).x(pos.x+58).y(pos.y).z(2000).w(this.nodeRoot.w()-$__tune.ui.scrollbarWidth-61).h(24).o(0.8); + node.s('background:#000;border:1px solid #777;border-top:0;'); + var search_key_id = 'is_key_?'.embed(this.window.ident); + var ht = '
'; + node.t(ht); + var me = this; + var status_node = node.g('td:0'); + var search_key_node = node.g('input:0'); + var original_caret_pos = [me.window.caret.position[0], me.window.caret.position[1]]; + var last_keyword = ''; + var selection = me.window.getSelection(); + search_key_node.e('keydown', function(evt) + { + evt.stopPropagation(); + if (40 == evt.keyCode) + { + me.window.runAction(ac.chap.ACTION_CUSTOM, {action:'SearchKeyword', direction:'down'}); + me.scrollToRow(me.window.caret.position[0], false, true); + me.window.processActionResult(true, true); + evt.preventDefault(); + return true; + } + else if (38 == evt.keyCode) + { + me.window.runAction(ac.chap.ACTION_CUSTOM, {action:'SearchKeyword', direction:'up'}); + me.scrollToRow(me.window.caret.position[0], false, true); + me.window.processActionResult(true, true); + evt.preventDefault(); + return true; + } + else if (27 == evt.keyCode) + { + finish(true); + evt.preventDefault(); + return true; + } + else if (13 == evt.keyCode) + { + finish(); + evt.preventDefault(); + return true; + } + }).e('keyup', function(evt) + { + evt.stopPropagation(); + search(); + + }).$.focus(); + node.g('img:0').e('click', function(evt) + { + evt.stopPropagation(); + finish(true); + }); + + function finish(canceled) + { + if (canceled) + { + me.window.removeSelection(); + me.window.runAction(ac.chap.ACTION_CARET, {moveTo:[original_caret_pos[0], original_caret_pos[1]]}); + me.scrollToRow(me.window.caret.position[0], false, true); + me.window.processActionResult(true, true); + } + ac.chap.setActiveComponent(me.window); + me.hideInteractiveSearch(); + } + + function update_status(numFound) + { + status_node.t('Found ? results.'.embed(numFound)); + } + + function search() + { + var keyword = search_key_node.$.value.trim(); + if ('' == keyword || last_keyword == keyword) + { + if ('' == keyword) + { + update_status(0); + } + return; + } + update_status(me.window.getText().split(keyword).length - 1); + last_keyword = keyword; + me.window.removeSelection(); + me.window.runAction(ac.chap.ACTION_CARET, {moveTo:[original_caret_pos[0], original_caret_pos[1]]}); + me.window.runAction(ac.chap.ACTION_CUSTOM, {action:'SetSearchKeyword', keyword:keyword}); + me.window.runAction(ac.chap.ACTION_CUSTOM, {action:'SearchKeyword', direction:'down'}); + me.scrollToRow(me.window.caret.position[0], false, true); + me.window.processActionResult(true, true); + } + + if (null != selection) + { + search_key_node.$.value = selection; + search_key_node.$.select(); + search_key_node.$.focus(); + search(); + } + + + + this.interactiveSearchNode = node; +} + +ac.chap.View.prototype.hideInteractiveSearch = function() +{ + if (this.interactiveSearchNode && this.interactiveSearchNode.is()) + { + this.interactiveSearchNode.rs(); + } +} + +ac.chap.View.prototype.render = function(node) +{ + var w = node.$.offsetWidth; + var h = node.$.offsetHeight; + this.recalculateNumRows(node); + this.recalculateNumCols(node); + node.sa('chap-view', 'true'); + var me = this; + this.nodeRoot = node.a($$()).pos(true).w(w).h(h).n('acw-chap').s('background:?'.embed(this.theme.background)); + this.interactiveSearchNode = null; + + var w_rows = 58; + w -= w_rows; + this.nodeSidebar = this.nodeRoot.a($$()).pos(true).x(0).y(0).w(w_rows).h(h).s('overflow:hidden').n('sidebar'); + + // rendering sidebar stub + this.renderSidebarStub(); + + + this.nodeScrollArea = this.nodeRoot.a($$()).pos(true).x(w_rows).y(0).w(w).h(h).n('scroll-area').s('overflow:auto'); + this.nodeScrollArea.e('scroll', function(evt) + { + var offset = Math.floor(me.nodeScrollArea.$.scrollTop/me.options.rowHeight); + var map = me.window.row_id_map[me.index]; + var row_index = 0; + for ( var i=0; i' + ch_encode_markup(token[1]) + ''; + } + else + { + rend_chunk += ch_encode_markup(token[1]); + } + i += token[1].length - 1; + // offset = i + token[1].length; + offset = i + 1; + // console.log(token, offset, rend_chunk); + } + rend_chunk += ch_encode_markup(chunk.substr(offset)); + chunk = rend_chunk; + } + else + { + chunk = ch_encode_markup(chunk); + } + return chunk; +} + +ac.chap.View.prototype.renderTextRow = function(node, rowIndex, renderedPreviously) +{ + var row = this.window.char_map[rowIndex]; + var rendered_row = ''; + var offset = 0; + var font_style = ';font:' + this.window.options.font.size + 'px ' + this.window.options.font.family; + var interpolation = this.window.language.stringInterpolation; + + var row_state = this.window.row_id_map[this.index][rowIndex][2]; + + if ( 'undefined' != typeof this.window.syntax_map[rowIndex] && 0 < this.window.syntax_map[rowIndex].length ) + { + // console.log(this.window.syntax_map[rowIndex]); + var n = this.window.syntax_map[rowIndex].length; + for ( var i=0; i' + ch_encode_markup(chunk.substring(0, m.index)) + ''; + new_chunk += this.renderChunk(chunk.substr(m.index, m[interpolation[1]].length)); + chunk = chunk.substr(m.index + m[interpolation[1]].length); + // console.warn(chunk); + } + new_chunk += '' + ch_encode_markup(chunk) + ''; + // console.info(new_chunk); + rendered_row += new_chunk; + } + else + { + rendered_row += ''+ch_encode_markup(chunk)+''; + // console.log(rendered_row); + } + } + else + { + rendered_row += ch_encode_markup(chunk); + } + offset = -1 == end_offset ? row.length : end_offset; + } + } + rendered_row += this.renderChunk(row.substr(offset)); + // console.log(rendered_row); + // rendering custom selection (search results, errors and such) + // !!!!!!!!!! + // NOT USED NOW !!!!! + // !!!!!!!!!! + // !!!!!!!!!! + // !!!!!!!!!! + // !!!!!!!!!! + if ( false && ac.chap.ROWSTATE_SELECTION == (row_state & ac.chap.ROWSTATE_SELECTION) ) + { + var range = this.window.row_id_map[this.index][rowIndex][5]; + if ( 0 == range[0] && this.window.char_map[rowIndex].length == range[1] ) + { + rendered_row = ''+rendered_row+''; + } + else + { + // console.log(range); + var raw = rendered_row; + var n = raw.length; + var col_index = 0; + var selection_started = false; + var offset = 0; + // console.log('before: %s', raw); + for ( var i=0; i'); + i += ix; + // console.log('ix: %s', ix); + + if ( selection_started ) + { + var c = ''; + rendered_row = rendered_row.substr(0, i+offset+1)+c+rendered_row.substr(i+offset+1); + offset += c.length; + } + continue; + } + if ( range[0] == col_index ) + { + selection_started = true; + var c = ''; + rendered_row = rendered_row.substr(0, i+offset)+c+rendered_row.substr(i+offset); + offset += c.length; + } + if ( selection_started && range[1]-1 < col_index ) + { + selection_started = false; + var c = ''; + rendered_row = rendered_row.substr(0, i+offset)+c+rendered_row.substr(i+offset); + break; + } + if ( '&' == ch ) + { + if ( '<' == raw.substr(i, 4) || '>' == raw.substr(i, 4) ) + { + i += 3; + } + else if ( '&' == raw.substr(i, 5) ) + { + i += 4; + } + } + col_index++; + } + if ( selection_started ) + { + rendered_row += ''; + } + } + } +// console.log(rendered_row); + // making intelligent tabelators - note, using simple replace of \t doesn't work + var ix = 0; + var tab = this.options.tabelator; + var raw = this.window.char_map[rowIndex]; + var tab_stack = []; + while ( -1 != ix ) + { + ix = raw.indexOf('\t'); + if ( -1 != ix ) + { + var tab_length = tab.length - (ix % tab.length); + raw = raw.substr(0,ix)+tab.substr(0, tab_length)+raw.substr(ix+1); + tab_stack.push(tab_length); + } + } + for ( var i=0; i'); + if ( -1 == ix ) + { + break; + } + i += ix; + continue; + } + var n_ch = 0; + if ( '&' == ch ) + { + if ( '<' == rendered_row.substr(i,4) || '>' == rendered_row.substr(i,4) ) + { + n_ch = 3; + } + else if ( '&' == rendered_row.substr(i,5) ) + { + n_ch = 4; + } + } + printable += ch.charAt(0); + if ( this.numCols == printable.length ) + { + raw = raw.substr(0, i+offset+n_ch)+'
'+raw.substr(i+offset+n_ch); + num_subrows++; + offset += 4; + printable = ''; + } + i += n_ch; + } + rendered_row = raw; + } + if ( ac.chap.ROWSTATE_FOLD_EXPAND == (row_state & ac.chap.ROWSTATE_FOLD_EXPAND) ) + { + var end_index = this.window.row_id_map[this.index][rowIndex][3][1]; + var content = ch_encode_markup(this.window.char_map.slice(rowIndex, end_index+1).join('\n').replace(/"/ig, "''")); + rendered_row += '
'.embed(content); + } + node.setAttribute('num-subrows', num_subrows); + + if ( $__tune.isIE ) + { + // IE trims input source in innerHTML + rendered_row = ch_encode_markup_spaces(rendered_row); + } + node.innerHTML = rendered_row; +} + +ac.chap.View.prototype.recalculateVisibleRows = function() +{ + var map = this.window.row_id_map[this.index]; + var n = map.length; + var i = 0; + var num_visibles = 0; + while ( i < n ) + { + var state = map[i][2]; + if ( 0 == (ac.chap.ROWSTATE_FOLD_COLLAPSED & state) ) + { + num_visibles++; + } + i++; + } + this.numVisibleRows = num_visibles; +} + +ac.chap.View.prototype.getVisibleRowIndices = function() +{ + var map = this.window.row_id_map[this.index]; + var i = 0; + var index = this.startRow; + var indices = []; + while ( i++ <= this.numRows ) + { + if ( 'undefined' == typeof this.window.row_id_map[this.index][index] ) + { + break; + } + var state = this.window.row_id_map[this.index][index][2]; + if ( ac.chap.ROWSTATE_FOLD_COLLAPSED == (ac.chap.ROWSTATE_FOLD_COLLAPSED & state) ) + { + // collapsed + i--; + index++; + continue; + } + indices.push(index); + if ( ac.chap.ROWSTATE_FOLD_EXPAND == (state & ac.chap.ROWSTATE_FOLD_EXPAND) ) + { + // collapsed folding + var refered_row_index = this.window.row_id_map[this.index][index][3][1]; + index = refered_row_index + 1; + } + else + { + index++; + } + } + return indices; +} + +ac.chap.View.prototype.renderRowSidebar = function(position, rowIndex, rowNode, forceCompleteRedraw) +{ + if (!this.nodeSidebar.firstChild.childNodes.item(position)) + { + return; + } + var bar_node = this.nodeSidebar.firstChild.childNodes.item(position).firstChild; + if ( 0 == rowNode.offsetHeight ) + { + rowNode.style.height = this.options.rowHeight; + } + var num_subrows = parseInt(rowNode.getAttribute('num-subrows')); + var cache_id = forceCompleteRedraw ? 'none' : (num_subrows+':'+this.window.row_id_map[this.index][rowIndex].join('-')); + if (bar_node.getAttribute('sidebar-cache-id') == cache_id && 'none' != cache_id) + { + return; + } + if ('none' != cache_id) + { + bar_node.setAttribute('sidebar-cache-id', cache_id); + bar_node.firstChild.style.fontSize = (this.window.options.font.size-2) + 'px'; + } + // console.log(cache_id); + + var row_height = num_subrows * this.options.rowHeight; + bar_node.parentNode.style.height = row_height + 'px'; + if (forceCompleteRedraw) + { + bar_node.firstChild.style.fontSize = (this.window.options.font.size-2) + 'px'; + } + var ht = rowIndex+1; + if ( this.options.wordWrap ) + { + var htt = '
'; + for ( var i=1; i this.numCols ) + { + ix_r++; + ix_c -= this.numCols; + } + if ( ii == range[1] ) + { + offset[2] = ix_r; + offset[3] = ix_c; + break; + } + } + if ( -1 == offset[3] ) + { + offset[2] = ix_r+1;//offset[0]+1; + } + node_row_selection.style.top = (node_row.offsetTop + this.options.rowHeight*offset[0]) + 'px'; +// console.log('%o', offset); + if ( offset[0] == offset[2] ) + { + // selection stays non-wrapped + node_row_selection.style.left = offset[1]*this.options.colWidth + 'px'; + node_row_selection.style.width = ((offset[3]-offset[1])*this.options.colWidth) + 'px'; +// console.log(node_row_selection.style.width); + } + else + { + // finishing current node + if ( -1 == offset[1] ) + { + // caret stays on the end of the row + node_row_selection.style.left = (ix_c*this.options.colWidth) + 'px'; + node_row_selection.style.width = (node_row.offsetWidth - (ix_c*this.options.colWidth)) + 'px'; + } + else + { + node_row_selection.style.left = (offset[1]*this.options.colWidth) + 'px'; + node_row_selection.style.width = (node_row.offsetWidth - (offset[1]*this.options.colWidth)) + 'px'; + } + // marking as non-cacheable + node_row_selection.removeAttribute('cachid'); + // creating additional ones + for ( ii=offset[0]+1; ii<=offset[2]; ii++ ) + { + node_row_selection = node_cache.appendChild(document.createElement('div')); + node_row_selection.style.background = this.theme.selectionStyle; + node_row_selection.style.position = 'absolute'; + node_row_selection.style.left = '0px'; + node_row_selection.style.top = (node_row.offsetTop+ii*this.options.rowHeight) + 'px'; + node_row_selection.style.height = this.options.rowHeight + 'px'; + if ( ii != offset[2] ) + { + node_row_selection.style.width = node_row.offsetWidth + 'px'; + } + else + { + node_row_selection.style.width = ((offset[3])*this.options.colWidth) + 'px'; + } + } + } + + } + else + { + var offset_x1 = this.getRenderedStringDimension(row_index, 0, range[0])[0]; + var offset_x2 = this.getRenderedStringDimension(row_index, 0, range[1]+1)[0]; + node_row_selection.style.left = offset_x1 + 'px'; + node_row_selection.style.width = (offset_x2 - offset_x1) + 'px'; + } + } + } + // console.log('selection after range: %o', this.window.row_id_map[this.index][row_index][3]); + + } + } + // console.log('%o', this.window.row_id_map[this.index][0]); + var ht = node_cache.innerHTML; + this.nodeSelectionArea.innerHTML = ht; +} + +ac.chap.View.prototype.renderText = function(forceCompleteRedraw) +{ + var row_indices = this.getVisibleRowIndices(); + var num_rows = row_indices.length; +// console.log('view: %s - row indices: %o', this.index, row_indices); + +// console.log('view: %s - num rows x cols [%s x %s]', this.index, this.numRows, this.numCols); + // checking to see if only one row changed - the most usual case + var changed_row_index = -1; + var changed_row_position = -1; + for ( var i=0; i fill_area_h ) + { + fill_area_h = this.nodeRoot.h()-$__tune.ui.scrollbarWidth; + } + this.nodeFillArea.h(fill_area_h); + + } + else + { + this.nodeEditAreaCache.innerHTML = ''; + } + if ( parseInt(this.nodeSidebar.firstChild.style.top) != top_offset ) + { + this.nodeSidebar.firstChild.style.top = (top_offset)+'px'; + this.nodeSidebar.firstChild.style.height = (this.nodeSidebar.offsetHeight - $__tune.ui.scrollbarWidth - top_offset)+'px'; + } + this.renderSelection(); +} + + + +/* + * ac.Chap - Text Editing Component widget - Settings file + */ + +if ( 'undefined' == typeof ac ) +{ + var ac = {chap:{}}; +} + + +$class('ac.chap.KeyMap', +{ + construct:function() + { + this.definition = {}; + this.isMac = true; + this.wordCompleteCache = null; + this.snippetCompleteCache = null; + this.searchKeyword = ''; + this.initDefinition(); + } +}); + +ac.chap.KeyMap.prototype.initDefinition = function() +{ +} + +ac.chap.KeyMap.prototype.importCommands = function(commands) +{ + var n = commands.length; + for ( var i=0; i looking_for_len && words_prev[i+1].substr(0, looking_for_len) == looking_for ) + { + if ( -1 == found_words_index.indexOf(' '+words_prev[i+1]) ) + { + found_words.push(words_prev[i+1]); + found_words_index += ' '+words_prev[i+1]; + } + } + if ( words_next[i] && words_next[i].length > looking_for_len && words_next[i].substr(0, looking_for_len) == looking_for ) + { + if ( -1 == found_words_index.indexOf(' '+words_next[i]) ) + { + found_words.push(words_next[i]); + found_words_index += ' '+words_next[i]; + } + } + } + if ( 1 < found_words.length ) + { +// console.log('results found: %o', found_words); + wcc.results = found_words; + wcc.index = 0; + proceed_complete = true; + } + } + else + { + proceed_complete = true; + } + var num_results = wcc.results.length; + if ( proceed_complete && 0 < num_results ) + { + var index = wcc.index; + index += params.direction ? 1 : -1; + if ( num_results <= index ) + { + index = 0; + } + else if ( 0 > index ) + { + index = num_results-1; + } +// console.log('n:%s i:%s', num_results, index); + // let's not add the following operation to the transaction/undo log + component.stopTransactionLog(); + component.runAction(ac.chap.ACTION_CARET, {move:'prev_word'}); + component.runAction(ac.chap.ACTION_SELECTION, {add:true}); + component.runAction(ac.chap.ACTION_DELETE, {character:false}); + component.runAction(ac.chap.ACTION_INSERT, {string:wcc.results[index]}); + component.startTransactionLog(); + wcc.index = index; + wcc.position = [component.caret.position[0], component.caret.position[1]]; + } + else + { + wcc.results = []; + } + this.wordCompleteCache = wcc; + return ac.chap.ACTION_RES_REDRAWCARET | ac.chap.ACTION_RES_REDRAWTEXT; +} + +ac.chap.KeyMap.prototype.getAffectedRows = function(component, caretRow) +{ + var from_row = caretRow; + var to_row = caretRow; + if (null != component.selection) + { + var start_pos = component.selection.startPosition[0]; + var end_pos = component.selection.endPosition[0]; + if (-1 == component.selection.endPosition[1]) + { + end_pos--; + } + from_row = Math.min(start_pos, end_pos); + to_row = Math.max(start_pos, end_pos); + } + return [from_row, to_row]; +} + +ac.chap.KeyMap.prototype.action_Indent = function(keyCode, controlKeysMask, caretRow, caretCol, component, params) +{ + var affected_rows = this.getAffectedRows(component, caretRow); + var tab = component.getTabelator(); + for (var i=affected_rows[0]; i<=affected_rows[1]; i++) + { + if ('right' == params.direction) + { + component.insertIntoCharacterMap(tab, i, 0); + } + else + { + var row = component.char_map[i]; + var index = 0; + while (('\t' == row.charAt(index) || ' ' == row.charAt(index)) && (row.length > index) && (tab.length > index)) index++; + if (0 < index) + { + component.removeFromCharacterMap(i, 0, i, index); + } + } + } + return ac.chap.ACTION_RES_REDRAWCARET | ac.chap.ACTION_RES_REDRAWTEXT | ac.chap.ACTION_RES_SELECTIONCHANGED; +} + +ac.chap.KeyMap.prototype.action_Comment = function(keyCode, controlKeysMask, caretRow, caretCol, component, params) +{ + if (!component.language) + { + return 0; + } + var markers = component.language.singleRowCommentStartMarkers; + if (0 == markers.length) + { + return 0; + } + var marker = markers[0]; + var tab = component.getTabelator(); + var affected_rows = this.getAffectedRows(component, caretRow); + var tab = component.getTabelator(); + var prepend_text = marker + ' '; + for (var i=affected_rows[0]; i<=affected_rows[1]; i++) + { + var row = component.char_map[i]; + var index = row.indexOf(marker); + if (-1 != index && 0 == row.substring(0, index).replace(tab, '').replace(' ', '')) + { + // was commented + component.removeFromCharacterMap(i, 0, i, index+marker.length); + } + else + { + // will be commented + component.insertIntoCharacterMap(marker, i, 0); + } + } + return ac.chap.ACTION_RES_REDRAWCARET | ac.chap.ACTION_RES_REDRAWTEXT | ac.chap.ACTION_RES_SELECTIONCHANGED; +} + +ac.chap.KeyMap.prototype.action_RuntimeOption = function(keyCode, controlKeysMask, caretRow, caretCol, component, params) +{ + component.setRuntimeOption(params['key'], params['value']); + return ac.chap.ACTION_RES_REDRAWCARET | ac.chap.ACTION_RES_REDRAWTEXT | ac.chap.ACTION_RES_SELECTIONCHANGED; +} + +ac.chap.KeyMap.prototype.action_SearchInteractive = function(keyCode, controlKeysMask, caretRow, caretCol, component, params) +{ + component.showInteractiveSearch(); + return ac.chap.ACTION_RES_REDRAWCARET | ac.chap.ACTION_RES_SELECTIONCHANGED; +} + +ac.chap.KeyMap.prototype.action_SetSearchKeyword = function(keyCode, controlKeysMask, caretRow, caretCol, component, params) +{ + if (params['keyword']) + { + this.searchKeyword = params['keyword']; + return 0; + } + if (component.selection && component.selection.startPosition[0] == component.selection.endPosition[0]) + { + this.searchKeyword = component.getSelection(); + return ac.chap.ACTION_RES_SELECTIONCHANGED; + } + return 0; +} + +ac.chap.KeyMap.prototype.action_SearchKeyword = function(keyCode, controlKeysMask, caretRow, caretCol, component, params) +{ + if ('' == this.searchKeyword) + { + return 0; + } + row_index = caretRow; + var index = 0; + var search_down = 'down' == params['direction']; + do + { + var row = component.char_map[row_index]; + var offset = 0; + console.log(ac.chap.activeComponent.activeView); + if (row_index == caretRow) + { + if (search_down) + { + // if (row.substring(caretCol, this.searchKeyword.length) == this.searchKeyword) + // { + // // offset = this.searchKeyword.length; + // } + row = row.substr(caretCol) + offset += caretCol; + } + else + { + if (row.substring(caretCol-this.searchKeyword.length, caretCol)) + { + offset = this.searchKeyword.length; + } + row = row.substring(0, caretCol - offset); + offset = 0; + } + } + index = search_down ? row.indexOf(this.searchKeyword) : row.lastIndexOf(this.searchKeyword); + if (-1 != index) + { + index += offset; + component.runAction(ac.chap.ACTION_SELECTION, {remove:true}); + component.runAction(ac.chap.ACTION_CARET, {moveTo:[row_index, index]}); + component.runAction(ac.chap.ACTION_CARET, {store:true}); + component.runAction(ac.chap.ACTION_CARET, {moveTo:[row_index, index+this.searchKeyword.length]}); + component.runAction(ac.chap.ACTION_SELECTION, {add:true}); + return ac.chap.ACTION_RES_REDRAWCARET | ac.chap.ACTION_RES_SELECTIONCHANGED | ac.chap.ACTION_RES_SCROLLTOCARET; + } + row_index += search_down ? 1 : -1; + if (search_down && row_index == component.char_map.length) + { + row_index = 0; + } + else if (!search_down && -1 == row_index) + { + row_index = component.char_map.length-1; + } + } + while (caretRow != row_index); + return ac.chap.ACTION_RES_REDRAWCARET | ac.chap.ACTION_RES_SELECTIONCHANGED; +} + +ac.chap.KeyMap.prototype.action_SmartIndent = function(keyCode, controlKeysMask, caretRow, caretCol, component, params) +{ + // console.log(params); + var line = component.getLineAt(caretRow); + var m = params['indent_tab_when_ends'] ? line.match(/^([ \t]*)(.*)$/) : line.match(/^([ \t]*)([^ \t]*)/); + // console.log(m); + var prepend_text = m[1]; + if (params['indent_tab_when_ends'] || params['indent_tab_when_starts']) + { + m[2] = m[2].trim(); + var indent_when_values = params['indent_tab_when_ends'] ? params['indent_tab_when_ends'].split(' ') : params['indent_tab_when_starts'].split(' '); + for (var i=0; i#'); + code = code.substr(start_ix+4, m[3].length)+'##'+code.substr(start_ix+m[0].length-m[1].length); + any_change = true; + } + else + { + break; + } + } + code_chunks.push(code); + code = code_chunks.join(''); + } + re = /##/; + while ( true ) + { + m = re.exec(code) + if ( null == m ) + { + break; + } + tabstops[m[1]][1] = tabstops[m[1]][1].replace(/##/g, ''); + tabstops[m[1]][2] = m.index; + tabstops[m[1]][3] = tabstops[m[1]][1].length; + code = code.substr(0, m.index)+code.substr(m.index+m[0].length).replace('##', ''); + } + + // [getting mirrors] + re = /\{\$\{(\d)\:([^\}]*)\}\}/; + while ( true ) + { + m = re.exec(code) + if ( null == m ) + { + break; + } + code = code.substr(0, m.index)+m[2]+code.substr(m.index+m[0].length); + var ix_end = code.indexOf('{$'+m[1]+'}'); + if ( -1 == ix_end ) + { + console.error('Invalid snippet definition. Mirror `?` does not have `{$?}` mirrored location specified.'.embed(m[1], m[1])); + break; + } + tabstops[m[1]] = ['mi', m[2], m.index, m[2].length, ix_end]; + if ( m.index > ix_end ) + { + console.error('Unsupported feature. Mirror `?` should have mirrored location positioned AFTER itself.'.embed(m[1])); + } + code = code.substr(0, ix_end)+code.substr(ix_end+4); + } + + // [getting tabstops] + re = /(^|[^\\])\$(\d)/; + while (true) + { + m = re.exec(code); + if ( null == m ) + { + break; + } + tab_id = m[2]; + if ( tabstops[tab_id] ) + { + console.error('Invalid snippet definition. Tabstop `?` already defined as placeholder at position `?`. Snippet source: `?`.'.embed(tab_id, m.index, code)); + break; + } + var start_ix = m.index+m[1].length; + tabstops[tab_id] = ['ts', '', start_ix, 0]; + code = code.substr(0, start_ix)+code.substr(start_ix+2); + var offset = m[1].length + 2; + for ( var tab_id in tabstops ) + { + // console.log('adjusting: %s, %s < %s', tab_id, start_ix, tabstops[tab_id][2]); + if ( 'mi' == tabstops[tab_id][0] ) + { + if ( start_ix < tabstops[tab_id][2] ) + { + tabstops[tab_id][2] -= offset; + } + if ( start_ix < tabstops[tab_id][4] ) + { + tabstops[tab_id][4] -= offset; + } + } + else if ( 'ph' == tabstops[tab_id][0] && start_ix < tabstops[tab_id][2] ) + { + tabstops[tab_id][2] -= offset; + } + } + } + // $0 not defined, will be at the end of the snippet by default + if ( !tabstops[0] ) + { + tabstops[0] = ['ts', '', code.length, 0]; + } + + // [postprocessing - unescape] + code = code.replace(/\0/g, '$'); + + + for ( var tab_id in tabstops ) + { + var placeholder = tabstops[tab_id]; +// console.log('#%s : %o', tab_id, placeholder); + } + var scc = + { + firstInitialized:true, + insertCaretPosition:[caretRow, caretCol], + tabstops: tabstops, + callbackIndex: -1, + activeTabStopIndex:tabstops[1] ? 1 : 0, + activeTabStopRange:[], + activeTabStopContent:'', + activeTabStopNested:[], + wasSelection:wasSelection, + tabActivation:tabActivation + } + + if ( !scc.wasSelection ) + { + component.runAction(ac.chap.ACTION_CARET, {move:'prev_word'}); + component.runAction(ac.chap.ACTION_SELECTION, {add:true}); + component.runAction(ac.chap.ACTION_DELETE, {character:true}); + } + + var tabstop = tabstops[scc.activeTabStopIndex]; + + + component.runAction(ac.chap.ACTION_INSERT, {string:code.substr(0, tabstop[2])}); + component.runAction(ac.chap.ACTION_INSERT, {string:code.substr(tabstop[2]), skipCaretChange:true}); + + // selecting default value + var selection_changed = false; + if ( '' != tabstop[1] ) + { + component.runAction(ac.chap.ACTION_CARET, {store:true}); + component.runAction(ac.chap.ACTION_CARET, {moveBy:'column', value:tabstop[1].length}); + component.runAction(ac.chap.ACTION_SELECTION, {add:true}); + selection_changed = true; + } + + if ( 0 != scc.activeTabStopIndex ) + { + // starting action listener + this.snippetCompleteCache = scc; + this.snippetCompleteCache.callbackIndex = component.addActionListener(ac.chap.ACTION_LISTENER_BOTH, this, this.snippetCompleteActionListener); + } + } + return ac.chap.ACTION_RES_REDRAWCARET | ac.chap.ACTION_RES_REDRAWTEXT | (selection_changed ? ac.chap.ACTION_RES_SELECTIONCHANGED : 0); +// return ac.chap.ACTION_RES_REDRAWCARET | ac.chap.ACTION_RES_REDRAWTEXT; +} + +ac.chap.KeyMap.prototype.snippetCompleteActionListener = function(component, action, type, actionResult, actionType, params, caretRow, caretCol) +{ + var scc = action.snippetCompleteCache; + + if ( ac.chap.ACTION_LISTENER_BEFORE == type && !scc.firstInitialized ) + { + // before action listener + // check if we are still in the tabstop range +// var offset = component.char_map[caretRow].substr() + // console.log('activeTabStopRange: %o', scc.activeTabStopRange); + if ( caretRow < scc.activeTabStopRange[0] || caretRow > scc.activeTabStopRange[2] || caretCol < scc.activeTabStopRange[1] || caretCol > scc.activeTabStopRange[3] ) + { + // out of range, canceling whole snippet logic + component.removeActionListener(scc.callbackIndex); + component.removeSelection(); + delete action.snippetCompleteCache; + // console.log('CANCELED'); + return; + } +// console.log('before: %s - [%s,%s]', actionType, caretRow, caretCol); + } + else + { + // after action listener + if ( scc.firstInitialized ) + { + scc.firstInitialized = false; + var tabstop = scc.tabstops[scc.activeTabStopIndex]; + caretCol -= tabstop[1].length; + var code_rows = tabstop[1].split('\n'); + var num_code_rows = code_rows.length; + var to_caret_row = caretRow + num_code_rows - 1; + var to_caret_col = (to_caret_row == caretRow ? caretCol : 0) + code_rows[num_code_rows-1].length; + scc.activeTabStopRange = [caretRow, caretCol, to_caret_row, to_caret_col]; + scc.stopMarker = component.char_map[to_caret_row].substr(to_caret_col); + // creating list of nested tabstops + for ( var i in scc.tabstops ) + { + if ( i == scc.activeTabStopIndex ) + { + continue; + } + var c_tabstop = scc.tabstops[i]; + if ( c_tabstop[2] >= tabstop[2] && (c_tabstop[2] + c_tabstop[3] <= tabstop[2] + tabstop[3]) ) + { + scc.activeTabStopNested[i] = true; + } + } + if ( 'mi' != tabstop[0] ) + { + scc.activeTabStopContent = tabstop[1]; + } + scc.firstRealRun = false; + +// action.snippetCompletePostInit(component, caretRow, caretCol); + // console.log('firstRealRun: %o', scc.activeTabStopRange); + } + else + { + // console.log('next: %o', scc.activeTabStopRange); + // adjust the range by finding the stop marker + var n = component.char_map.length; + var i = scc.activeTabStopRange[0]; + var found = false; + var max_iter = 50; +// var offset_range = [scc.activeTabStopRange[2], scc.activeTabStopRange[3]]; + var new_content = ''; + var old_content = scc.activeTabStopContent; + while ( i active_offset ) + { + if ( scc.activeTabStopNested[i] ) + { + // nested + delete scc.tabstops[i]; + } + else + { + tabstop[2] += offset; + // console.log('ADJUSTING: #%s by %s, new: %s', i, offset, tabstop[2]); + } + } + } + } + } + // console.log('after %s(%s, %s) : %o', actionType, caretRow, caretCol, scc.activeTabStopRange); + } +} + + +ac.chap.KeyMap.prototype.compile = function(source) +{ + /* example: + + KEY: -13+shift + selection(add:true) + caret(move:'up') + + KEY: -27 + caret(move:'row_end') + + ... + .. + . + */ + var rows = source.split('\n'); + var n = rows.length; + var re_definition = /^KEY\:\s*[-\d]*[\+\w\s]*$/; + var re_chain = /^[^\(]*\(.*\)\s*$/; + var src = ''; + var chain = []; + var last_key_code = null; + for ( var i=0; i)/i, 0, ac.chap.CHUNK_OPERATOR], + [/(\(|\)|\[|\]|\{|\})/i, 0, ac.chap.CHUNK_PARENTHESIS] + ]; + this.wordDelimiter = /[\w\.\d]/; + this.indentIgnoreMarker = /[\.]/; +} + + +ac.chap.lang = {}; + + + + + + +/* loader stuff - you are free to modify as needed */ + + +// !! Make sure, bundle_*.js is loaded prior launching this function - the bundle defines ac.chap.langEAmy, EAmyJavaScript etc. +function showEditor(templateNode) +{ + var source = templateNode.value; + templateNode = $(templateNode); + var w = templateNode.w(); + var h = templateNode.h(); + + var node = templateNode.p().ib($$(), templateNode).w(w).h(h); + templateNode.d(false); + + var language = ac.chap.lang.JavaScript; + var keymap = ac.chap.keymap.EAmyJavaScript; + + var instance = $new(ac.chap.Window, {language:ac.chap.lang.EAmy, keymap:ac.chap.Keymap}); + instance.addView(node, {theme:ac.chap.theme.EAmy, rowHeight:11, colWidth:7, wordWrap:true, tabelator:' '}); + + instance.show(); + instance.setSnippets(eamy.snippets); + instance.keymap.importSnippets(eamy.snippets); + instance.edit(source); + eamy.instances.push(instance); + +} + +// !! Remove from here and include in your section if you want. +// document.write(''); + + +// Performed upon loading the page. You are free to remove it and call the showEditor() (or modified version of it) in order to launch the editing component. Code of the showEditor should give you enough clue. +$__tune.event.addListener(self, 'load', function(evt) +{ + // this is basically a search for any
"; + html= t.translate(html, editAreas[id]["settings"]["language"]); + span.innerHTML= html; + father= d.getElementById(id).parentNode; + next= d.getElementById(id).nextSibling; + if(next==null) + father.appendChild(span); + else + father.insertBefore(span, next); + } + + if(!editAreas[id]["initialized"]) + { + t.execCommand(id, "EA_init"); // ini callback + if(editAreas[id]["settings"]["display"]=="later"){ + editAreas[id]["initialized"]= true; + return; + } + } + + if(t.isIE){ // launch IE selection checkup + t.init_ie_textarea(id); + } + + // get toolbar content + var area=editAreas[id]; + + for(i=0; i'; + } + + // add plugins scripts if not already loaded by the compressor (but need to load language in all the case) + for(i=0; i'; + t.iframe_script+=''; + } + + + // create css link for the iframe if the whole css text has not been already loaded by the compressor + if(!t.iframe_css){ + t.iframe_css=""; + } + + + // create template + template= t.template.replace(/\[__BASEURL__\]/g, t.baseURL); + template= template.replace("[__TOOLBAR__]",html_toolbar_content); + + + // fill template with good language sentences + template= t.translate(template, area["settings"]["language"], "template"); + + // add css_code + template= template.replace("[__CSSRULES__]", t.iframe_css); + // add js_code + template= template.replace("[__JSCODE__]", t.iframe_script); + + // add version_code + template= template.replace("[__EA_VERSION__]", t.version); + //template=template.replace(/\{\$([^\}]+)\}/gm, this.traduc_template); + + //editAreas[area["settings"]["id"]]["template"]= template; + + area.textarea=d.getElementById(area["settings"]["id"]); + editAreas[area["settings"]["id"]]["textarea"]=area.textarea; + + // if removing previous instances from DOM before (fix from Marcin) + if(typeof(window.frames["frame_"+area["settings"]["id"]])!='undefined') + delete window.frames["frame_"+area["settings"]["id"]]; + + // insert template in the document after the textarea + father= area.textarea.parentNode; + /* var container= document.createElement("div"); + container.id= "EditArea_frame_container_"+area["settings"]["id"]; + */ + content= d.createElement("iframe"); + content.name= "frame_"+area["settings"]["id"]; + content.id= "frame_"+area["settings"]["id"]; + content.style.borderWidth= "0px"; + setAttribute(content, "frameBorder", "0"); // IE + content.style.overflow="hidden"; + content.style.display="none"; + + + next= area.textarea.nextSibling; + if(next==null) + father.appendChild(content); + else + father.insertBefore(content, next) ; + f=window.frames["frame_"+area["settings"]["id"]]; + f.document.open(); + f.editAreas=editAreas; + f.area_id= area["settings"]["id"]; + f.document.area_id= area["settings"]["id"]; + f.document.write(template); + f.document.close(); + + // frame.editAreaLoader=this; + //editAreas[area["settings"]["id"]]["displayed"]=true; + + }, + + toggle : function(id, toggle_to){ + + /* if((editAreas[id]["displayed"]==true && toggle_to!="on") || toggle_to=="off"){ + this.toggle_off(id); + }else if((editAreas[id]["displayed"]==false && toggle_to!="off") || toggle_to=="on"){ + this.toggle_on(id); + }*/ + if(!toggle_to) + toggle_to= (editAreas[id]["displayed"]==true)?"off":"on"; + if(editAreas[id]["displayed"]==true && toggle_to=="off"){ + this.toggle_off(id); + }else if(editAreas[id]["displayed"]==false && toggle_to=="on"){ + this.toggle_on(id); + } + + return false; + }, + + // static function + toggle_off : function(id){ + var fs=window.frames,f,t,parNod,nxtSib,selStart,selEnd,scrollTop,scrollLeft; + if(fs["frame_"+id]) + { + f = fs["frame_"+id]; + t = editAreas[id]["textarea"]; + if(f.editArea.fullscreen['isFull']) + f.editArea.toggle_full_screen(false); + editAreas[id]["displayed"]=false; + + // set wrap to off to keep same display mode (some browser get problem with this, so it need more complex operation + t.wrap = "off"; // for IE + setAttribute(t, "wrap", "off"); // for Firefox + parNod = t.parentNode; + nxtSib = t.nextSibling; + parNod.removeChild(t); + parNod.insertBefore(t, nxtSib); + + // restore values + t.value= f.editArea.textarea.value; + selStart = f.editArea.last_selection["selectionStart"]; + selEnd = f.editArea.last_selection["selectionEnd"]; + scrollTop = f.document.getElementById("result").scrollTop; + scrollLeft = f.document.getElementById("result").scrollLeft; + + + document.getElementById("frame_"+id).style.display='none'; + + t.style.display="inline"; + + try{ // IE will give an error when trying to focus an invisible or disabled textarea + t.focus(); + } catch(e){}; + if(this.isIE){ + t.selectionStart= selStart; + t.selectionEnd = selEnd; + t.focused = true; + set_IE_selection(t); + }else{ + if(this.isOpera && this.isOpera < 9.6 ){ // Opera bug when moving selection start and selection end + t.setSelectionRange(0, 0); + } + try{ + t.setSelectionRange(selStart, selEnd); + } catch(e) {}; + } + t.scrollTop= scrollTop; + t.scrollLeft= scrollLeft; + f.editArea.execCommand("toggle_off"); + + } + }, + + // static function + toggle_on : function(id){ + var fs=window.frames,f,t,selStart=0,selEnd=0,scrollTop=0,scrollLeft=0,curPos,elem; + + if(fs["frame_"+id]) + { + f = fs["frame_"+id]; + t = editAreas[id]["textarea"]; + area= f.editArea; + area.textarea.value= t.value; + + // store display values; + curPos = editAreas[id]["settings"]["cursor_position"]; + + if(t.use_last==true) + { + selStart = t.last_selectionStart; + selEnd = t.last_selectionEnd; + scrollTop = t.last_scrollTop; + scrollLeft = t.last_scrollLeft; + t.use_last=false; + } + else if( curPos == "auto" ) + { + try{ + selStart = t.selectionStart; + selEnd = t.selectionEnd; + scrollTop = t.scrollTop; + scrollLeft = t.scrollLeft; + //alert(scrollTop); + }catch(ex){} + } + + // set to good size + this.set_editarea_size_from_textarea(id, document.getElementById("frame_"+id)); + t.style.display="none"; + document.getElementById("frame_"+id).style.display="inline"; + area.execCommand("focus"); // without this focus opera doesn't manage well the iframe body height + + + // restore display values + editAreas[id]["displayed"]=true; + area.execCommand("update_size"); + + f.document.getElementById("result").scrollTop= scrollTop; + f.document.getElementById("result").scrollLeft= scrollLeft; + area.area_select(selStart, selEnd-selStart); + area.execCommand("toggle_on"); + + + } + else + { + /* if(this.isIE) + get_IE_selection(document.getElementById(id)); */ + elem= document.getElementById(id); + elem.last_selectionStart= elem.selectionStart; + elem.last_selectionEnd= elem.selectionEnd; + elem.last_scrollTop= elem.scrollTop; + elem.last_scrollLeft= elem.scrollLeft; + elem.use_last=true; + editAreaLoader.start(id); + } + }, + + set_editarea_size_from_textarea : function(id, frame){ + var elem,width,height; + elem = document.getElementById(id); + + width = Math.max(editAreas[id]["settings"]["min_width"], elem.offsetWidth)+"px"; + height = Math.max(editAreas[id]["settings"]["min_height"], elem.offsetHeight)+"px"; + if(elem.style.width.indexOf("%")!=-1) + width = elem.style.width; + if(elem.style.height.indexOf("%")!=-1) + height = elem.style.height; + //alert("h: "+height+" w: "+width); + + frame.style.width= width; + frame.style.height= height; + }, + + set_base_url : function(){ + var t=this,elems,i,docBasePath; + + if( !this.baseURL ){ + elems = document.getElementsByTagName('script'); + + for( i=0; i'; + html += ''; + return html; + }, + + get_control_html : function(button_name, lang) { + var t=this,i,but,html,si; + for (i=0; i"; + case "|": + case "separator": + return ''; + case "select_font": + html= ""; + return html; + case "syntax_selection": + html= ""; + return html; + } + + return "["+button_name+"]"; + }, + + + get_template : function(){ + if(this.template=="") + { + var xhr_object = null; + if(window.XMLHttpRequest) // Firefox + xhr_object = new XMLHttpRequest(); + else if(window.ActiveXObject) // Internet Explorer + xhr_object = new ActiveXObject("Microsoft.XMLHTTP"); + else { // XMLHttpRequest not supported + alert("XMLHTTPRequest not supported. EditArea not loaded"); + return; + } + + xhr_object.open("GET", this.baseURL+"template.html", false); + xhr_object.send(null); + if(xhr_object.readyState == 4) + this.template=xhr_object.responseText; + else + this.has_error(); + } + }, + + // translate text + translate : function(text, lang, mode){ + if(mode=="word") + text=editAreaLoader.get_word_translation(text, lang); + else if(mode="template"){ + editAreaLoader.current_language= lang; + text=text.replace(/\{\$([^\}]+)\}/gm, editAreaLoader.translate_template); + } + return text; + }, + + translate_template : function(){ + return editAreaLoader.get_word_translation(EditAreaLoader.prototype.translate_template.arguments[1], editAreaLoader.current_language); + }, + + get_word_translation : function(val, lang){ + var i; + + for( i in editAreaLoader.lang[lang]){ + if(i == val) + return editAreaLoader.lang[lang][i]; + } + return "_"+val; + }, + + load_script : function(url){ + var t=this,d=document,script,head; + + if( t.loadedFiles[url] ) + return; + //alert("load: "+url); + try{ + script= d.createElement("script"); + script.type= "text/javascript"; + script.src= url; + script.charset= "UTF-8"; + d.getElementsByTagName("head")[0].appendChild(script); + }catch(e){ + d.write(''); + } + + t.loadedFiles[url] = true; + }, + + add_event : function(obj, name, handler) { + try{ + if (obj.attachEvent) { + obj.attachEvent("on" + name, handler); + } else{ + obj.addEventListener(name, handler, false); + } + }catch(e){} + }, + + remove_event : function(obj, name, handler){ + try{ + if (obj.detachEvent) + obj.detachEvent("on" + name, handler); + else + obj.removeEventListener(name, handler, false); + }catch(e){} + }, + + + // reset all the editareas in the form that have been reseted + reset : function(e){ + var formObj,is_child,i,x; + + formObj = editAreaLoader.isIE ? window.event.srcElement : e.target; + if(formObj.tagName!='FORM') + formObj= formObj.form; + + for( i in editAreas ){ + is_child= false; + for( x=0;x old_sel["start"]) // if text was selected, cursor at the end + this.setSelectionRange(id, new_sel["end"], new_sel["end"]); + else // cursor in the middle + this.setSelectionRange(id, old_sel["start"]+open_tag.length, old_sel["start"]+open_tag.length); + }, + + // hide both EditArea and normal textarea + hide : function(id){ + var fs= window.frames,d=document,t=this,scrollTop,scrollLeft,span; + if(d.getElementById(id) && !t.hidden[id]) + { + t.hidden[id]= {}; + t.hidden[id]["selectionRange"]= t.getSelectionRange(id); + if(d.getElementById(id).style.display!="none") + { + t.hidden[id]["scrollTop"]= d.getElementById(id).scrollTop; + t.hidden[id]["scrollLeft"]= d.getElementById(id).scrollLeft; + } + + if(fs["frame_"+id]) + { + t.hidden[id]["toggle"]= editAreas[id]["displayed"]; + + if(fs["frame_"+id] && editAreas[id]["displayed"]==true){ + scrollTop = fs["frame_"+ id].document.getElementById("result").scrollTop; + scrollLeft = fs["frame_"+ id].document.getElementById("result").scrollLeft; + }else{ + scrollTop = d.getElementById(id).scrollTop; + scrollLeft = d.getElementById(id).scrollLeft; + } + t.hidden[id]["scrollTop"]= scrollTop; + t.hidden[id]["scrollLeft"]= scrollLeft; + + if(editAreas[id]["displayed"]==true) + editAreaLoader.toggle_off(id); + } + + // hide toggle button and debug box + span= d.getElementById("EditAreaArroundInfos_"+id); + if(span){ + span.style.display='none'; + } + + // hide textarea + d.getElementById(id).style.display= "none"; + } + }, + + // restore hidden EditArea and normal textarea + show : function(id){ + var fs= window.frames,d=document,t=this,span; + if((elem=d.getElementById(id)) && t.hidden[id]) + { + elem.style.display= "inline"; + elem.scrollTop= t.hidden[id]["scrollTop"]; + elem.scrollLeft= t.hidden[id]["scrollLeft"]; + span= d.getElementById("EditAreaArroundInfos_"+id); + if(span){ + span.style.display='inline'; + } + + if(fs["frame_"+id]) + { + + // restore toggle button and debug box + + + // restore textarea + elem.style.display= "inline"; + + // restore EditArea + if(t.hidden[id]["toggle"]==true) + editAreaLoader.toggle_on(id); + + scrollTop = t.hidden[id]["scrollTop"]; + scrollLeft = t.hidden[id]["scrollLeft"]; + + if(fs["frame_"+id] && editAreas[id]["displayed"]==true){ + fs["frame_"+ id].document.getElementById("result").scrollTop = scrollTop; + fs["frame_"+ id].document.getElementById("result").scrollLeft = scrollLeft; + }else{ + elem.scrollTop = scrollTop; + elem.scrollLeft = scrollLeft; + } + + } + // restore selection + sel = t.hidden[id]["selectionRange"]; + t.setSelectionRange(id, sel["start"], sel["end"]); + delete t.hidden[id]; + } + }, + + // get the current file datas (for multi file editing mode) + getCurrentFile : function(id){ + return this.execCommand(id, 'get_file', this.execCommand(id, 'curr_file')); + }, + + // get the given file datas (for multi file editing mode) + getFile : function(id, file_id){ + return this.execCommand(id, 'get_file', file_id); + }, + + // get all the openned files datas (for multi file editing mode) + getAllFiles : function(id){ + return this.execCommand(id, 'get_all_files()'); + }, + + // open a file (for multi file editing mode) + openFile : function(id, file_infos){ + return this.execCommand(id, 'open_file', file_infos); + }, + + // close the given file (for multi file editing mode) + closeFile : function(id, file_id){ + return this.execCommand(id, 'close_file', file_id); + }, + + // close the given file (for multi file editing mode) + setFileEditedMode : function(id, file_id, to){ + var reg1,reg2; + reg1 = new RegExp('\\\\', 'g'); + reg2 = new RegExp('"', 'g'); + return this.execCommand(id, 'set_file_edited_mode("'+ file_id.replace(reg1, '\\\\').replace(reg2, '\\"') +'", '+ to +')'); + }, + + + // allow to access to editarea functions and datas (for advanced users only) + execCommand : function(id, cmd, fct_param){ + switch(cmd){ + case "EA_init": + if(editAreas[id]['settings']["EA_init_callback"].length>0) + eval(editAreas[id]['settings']["EA_init_callback"]+"('"+ id +"');"); + break; + case "EA_delete": + if(editAreas[id]['settings']["EA_delete_callback"].length>0) + eval(editAreas[id]['settings']["EA_delete_callback"]+"('"+ id +"');"); + break; + case "EA_submit": + if(editAreas[id]['settings']["submit_callback"].length>0) + eval(editAreas[id]['settings']["submit_callback"]+"('"+ id +"');"); + break; + } + if(window.frames["frame_"+id] && window.frames["frame_"+ id].editArea){ + if(fct_param!=undefined) + return eval('window.frames["frame_'+ id +'"].editArea.'+ cmd +'(fct_param);'); + else + return eval('window.frames["frame_'+ id +'"].editArea.'+ cmd +';'); + } + return false; + } +}; + + var editAreaLoader= new EditAreaLoader(); + var editAreas= {}; + ADDED applications/admin/static/edit_area/elements_functions.js Index: applications/admin/static/edit_area/elements_functions.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/elements_functions.js @@ -0,0 +1,336 @@ +/**** + * This page contains some general usefull functions for javascript + * + ****/ + + + // need to redefine this functiondue to IE problem + function getAttribute( elm, aName ) { + var aValue,taName,i; + try{ + aValue = elm.getAttribute( aName ); + }catch(exept){} + + if( ! aValue ){ + for( i = 0; i < elm.attributes.length; i ++ ) { + taName = elm.attributes[i] .name.toLowerCase(); + if( taName == aName ) { + aValue = elm.attributes[i] .value; + return aValue; + } + } + } + return aValue; + }; + + // need to redefine this function due to IE problem + function setAttribute( elm, attr, val ) { + if(attr=="class"){ + elm.setAttribute("className", val); + elm.setAttribute("class", val); + }else{ + elm.setAttribute(attr, val); + } + }; + + /* return a child element + elem: element we are searching in + elem_type: type of the eleemnt we are searching (DIV, A, etc...) + elem_attribute: attribute of the searched element that must match + elem_attribute_match: value that elem_attribute must match + option: "all" if must return an array of all children, otherwise return the first match element + depth: depth of search (-1 or no set => unlimited) + */ + function getChildren(elem, elem_type, elem_attribute, elem_attribute_match, option, depth) + { + if(!option) + var option="single"; + if(!depth) + var depth=-1; + if(elem){ + var children= elem.childNodes; + var result=null; + var results= []; + for (var x=0;x0){ + results= results.concat(result); + } + }else if(result!=null){ + return result; + } + } + } + } + if(option=="all") + return results; + } + return null; + }; + + function isChildOf(elem, parent){ + if(elem){ + if(elem==parent) + return true; + while(elem.parentNode != 'undefined'){ + return isChildOf(elem.parentNode, parent); + } + } + return false; + }; + + function getMouseX(e){ + + if(e!=null && typeof(e.pageX)!="undefined"){ + return e.pageX; + }else{ + return (e!=null?e.x:event.x)+ document.documentElement.scrollLeft; + } + }; + + function getMouseY(e){ + if(e!=null && typeof(e.pageY)!="undefined"){ + return e.pageY; + }else{ + return (e!=null?e.y:event.y)+ document.documentElement.scrollTop; + } + }; + + function calculeOffsetLeft(r){ + return calculeOffset(r,"offsetLeft") + }; + + function calculeOffsetTop(r){ + return calculeOffset(r,"offsetTop") + }; + + function calculeOffset(element,attr){ + var offset=0; + while(element){ + offset+=element[attr]; + element=element.offsetParent + } + return offset; + }; + + /** return the computed style + * @param: elem: the reference to the element + * @param: prop: the name of the css property + */ + function get_css_property(elem, prop) + { + if(document.defaultView) + { + return document.defaultView.getComputedStyle(elem, null).getPropertyValue(prop); + } + else if(elem.currentStyle) + { + var prop = prop.replace(/-\D/gi, function(sMatch) + { + return sMatch.charAt(sMatch.length - 1).toUpperCase(); + }); + return elem.currentStyle[prop]; + } + else return null; + } + +/**** + * Moving an element + ***/ + + var _mCE; // currently moving element + + /* allow to move an element in a window + e: the event + id: the id of the element + frame: the frame of the element + ex of use: + in html: + or + in javascript: document.getElementById("my_div").onmousedown= start_move_element + */ + function start_move_element(e, id, frame){ + var elem_id=(e.target || e.srcElement).id; + if(id) + elem_id=id; + if(!frame) + frame=window; + if(frame.event) + e=frame.event; + + _mCE= frame.document.getElementById(elem_id); + _mCE.frame=frame; + frame.document.onmousemove= move_element; + frame.document.onmouseup= end_move_element; + /*_mCE.onmousemove= move_element; + _mCE.onmouseup= end_move_element;*/ + + //alert(_mCE.frame.document.body.offsetHeight); + + mouse_x= getMouseX(e); + mouse_y= getMouseY(e); + //window.status=frame+ " elem: "+elem_id+" elem: "+ _mCE + " mouse_x: "+mouse_x; + _mCE.start_pos_x = mouse_x - (_mCE.style.left.replace("px","") || calculeOffsetLeft(_mCE)); + _mCE.start_pos_y = mouse_y - (_mCE.style.top.replace("px","") || calculeOffsetTop(_mCE)); + return false; + }; + + function end_move_element(e){ + _mCE.frame.document.onmousemove= ""; + _mCE.frame.document.onmouseup= ""; + _mCE=null; + }; + + function move_element(e){ + var newTop,newLeft,maxLeft; + + if( _mCE.frame && _mCE.frame.event ) + e=_mCE.frame.event; + newTop = getMouseY(e) - _mCE.start_pos_y; + newLeft = getMouseX(e) - _mCE.start_pos_x; + + maxLeft = _mCE.frame.document.body.offsetWidth- _mCE.offsetWidth; + max_top = _mCE.frame.document.body.offsetHeight- _mCE.offsetHeight; + newTop = Math.min(Math.max(0, newTop), max_top); + newLeft = Math.min(Math.max(0, newLeft), maxLeft); + + _mCE.style.top = newTop+"px"; + _mCE.style.left = newLeft+"px"; + return false; + }; + +/*** + * Managing a textarea (this part need the navigator infos from editAreaLoader + ***/ + + var nav= editAreaLoader.nav; + + // allow to get infos on the selection: array(start, end) + function getSelectionRange(textarea){ + return {"start": textarea.selectionStart, "end": textarea.selectionEnd}; + }; + + // allow to set the selection + function setSelectionRange(t, start, end){ + t.focus(); + + start = Math.max(0, Math.min(t.value.length, start)); + end = Math.max(start, Math.min(t.value.length, end)); + + if( nav.isOpera && nav.isOpera < 9.6 ){ // Opera bug when moving selection start and selection end + t.selectionEnd = 1; + t.selectionStart = 0; + t.selectionEnd = 1; + t.selectionStart = 0; + } + t.selectionStart = start; + t.selectionEnd = end; + //textarea.setSelectionRange(start, end); + + if(nav.isIE) + set_IE_selection(t); + }; + + + // set IE position in Firefox mode (textarea.selectionStart and textarea.selectionEnd). should work as a repeated task + function get_IE_selection(t){ + var d=document,div,range,stored_range,elem,scrollTop,relative_top,line_start,line_nb,range_start,range_end,tab; + if(t && t.focused) + { + if(!t.ea_line_height) + { // calculate the lineHeight + div= d.createElement("div"); + div.style.fontFamily= get_css_property(t, "font-family"); + div.style.fontSize= get_css_property(t, "font-size"); + div.style.visibility= "hidden"; + div.innerHTML="0"; + d.body.appendChild(div); + t.ea_line_height= div.offsetHeight; + d.body.removeChild(div); + } + //t.focus(); + range = d.selection.createRange(); + try + { + stored_range = range.duplicate(); + stored_range.moveToElementText( t ); + stored_range.setEndPoint( 'EndToEnd', range ); + if(stored_range.parentElement() == t){ + // the range don't take care of empty lines in the end of the selection + elem = t; + scrollTop = 0; + while(elem.parentNode){ + scrollTop+= elem.scrollTop; + elem = elem.parentNode; + } + + // var scrollTop= t.scrollTop + document.body.scrollTop; + + // var relative_top= range.offsetTop - calculeOffsetTop(t) + scrollTop; + relative_top= range.offsetTop - calculeOffsetTop(t)+ scrollTop; + // alert("rangeoffset: "+ range.offsetTop +"\ncalcoffsetTop: "+ calculeOffsetTop(t) +"\nrelativeTop: "+ relative_top); + line_start = Math.round((relative_top / t.ea_line_height) +1); + + line_nb = Math.round(range.boundingHeight / t.ea_line_height); + + range_start = stored_range.text.length - range.text.length; + tab = t.value.substr(0, range_start).split("\n"); + range_start += (line_start - tab.length)*2; // add missing empty lines to the selection + t.selectionStart = range_start; + + range_end = t.selectionStart + range.text.length; + tab = t.value.substr(0, range_start + range.text.length).split("\n"); + range_end += (line_start + line_nb - 1 - tab.length)*2; + t.selectionEnd = range_end; + } + } + catch(e){} + } + if( t && t.id ) + { + setTimeout("get_IE_selection(document.getElementById('"+ t.id +"'));", 50); + } + }; + + function IE_textarea_focus(){ + event.srcElement.focused= true; + } + + function IE_textarea_blur(){ + event.srcElement.focused= false; + } + + // select the text for IE (take into account the \r difference) + function set_IE_selection( t ){ + var nbLineStart,nbLineStart,nbLineEnd,range; + if(!window.closed){ + nbLineStart=t.value.substr(0, t.selectionStart).split("\n").length - 1; + nbLineEnd=t.value.substr(0, t.selectionEnd).split("\n").length - 1; + try + { + range = document.selection.createRange(); + range.moveToElementText( t ); + range.setEndPoint( 'EndToStart', range ); + range.moveStart('character', t.selectionStart - nbLineStart); + range.moveEnd('character', t.selectionEnd - nbLineEnd - (t.selectionStart - nbLineStart) ); + range.select(); + } + catch(e){} + } + }; + + + editAreaLoader.waiting_loading["elements_functions.js"]= "loaded"; ADDED applications/admin/static/edit_area/highlight.js Index: applications/admin/static/edit_area/highlight.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/highlight.js @@ -0,0 +1,407 @@ + // change_to: "on" or "off" + EditArea.prototype.change_highlight= function(change_to){ + if(this.settings["syntax"].length==0 && change_to==false){ + this.switchClassSticky(_$("highlight"), 'editAreaButtonDisabled', true); + this.switchClassSticky(_$("reset_highlight"), 'editAreaButtonDisabled', true); + return false; + } + + if(this.do_highlight==change_to) + return false; + + + this.getIESelection(); + var pos_start= this.textarea.selectionStart; + var pos_end= this.textarea.selectionEnd; + + if(this.do_highlight===true || change_to==false) + this.disable_highlight(); + else + this.enable_highlight(); + this.textarea.focus(); + this.textarea.selectionStart = pos_start; + this.textarea.selectionEnd = pos_end; + this.setIESelection(); + + }; + + EditArea.prototype.disable_highlight= function(displayOnly){ + var t= this, a=t.textarea, new_Obj, old_class, new_class; + + t.selection_field.innerHTML=""; + t.selection_field_text.innerHTML=""; + t.content_highlight.style.visibility="hidden"; + // replacing the node is far more faster than deleting it's content in firefox + new_Obj= t.content_highlight.cloneNode(false); + new_Obj.innerHTML= ""; + t.content_highlight.parentNode.insertBefore(new_Obj, t.content_highlight); + t.content_highlight.parentNode.removeChild(t.content_highlight); + t.content_highlight= new_Obj; + old_class= parent.getAttribute( a,"class" ); + if(old_class){ + new_class= old_class.replace( "hidden","" ); + parent.setAttribute( a, "class", new_class ); + } + + a.style.backgroundColor="transparent"; // needed in order to see the bracket finders + + //var icon= document.getElementById("highlight"); + //setAttribute(icon, "class", getAttribute(icon, "class").replace(/ selected/g, "") ); + //t.restoreClass(icon); + //t.switchClass(icon,'editAreaButtonNormal'); + t.switchClassSticky(_$("highlight"), 'editAreaButtonNormal', true); + t.switchClassSticky(_$("reset_highlight"), 'editAreaButtonDisabled', true); + + t.do_highlight=false; + + t.switchClassSticky(_$("change_smooth_selection"), 'editAreaButtonSelected', true); + if(typeof(t.smooth_selection_before_highlight)!="undefined" && t.smooth_selection_before_highlight===false){ + t.change_smooth_selection_mode(false); + } + + // this.textarea.style.backgroundColor="#FFFFFF"; + }; + + EditArea.prototype.enable_highlight= function(){ + var t=this, a=t.textarea, new_class; + t.show_waiting_screen(); + + t.content_highlight.style.visibility="visible"; + new_class =parent.getAttribute(a,"class")+" hidden"; + parent.setAttribute( a, "class", new_class ); + + // IE can't manage mouse click outside text range without this + if( t.isIE ) + a.style.backgroundColor="#FFFFFF"; + + t.switchClassSticky(_$("highlight"), 'editAreaButtonSelected', false); + t.switchClassSticky(_$("reset_highlight"), 'editAreaButtonNormal', false); + + t.smooth_selection_before_highlight=t.smooth_selection; + if(!t.smooth_selection) + t.change_smooth_selection_mode(true); + t.switchClassSticky(_$("change_smooth_selection"), 'editAreaButtonDisabled', true); + + + t.do_highlight=true; + t.resync_highlight(); + + t.hide_waiting_screen(); + }; + + /** + * Ask to update highlighted text + * @param Array infos - Array of datas returned by EditArea.get_selection_infos() + */ + EditArea.prototype.maj_highlight= function(infos){ + // for speed mesure + var debug_opti="",tps_start= new Date().getTime(), tps_middle_opti=new Date().getTime(); + var t=this, hightlighted_text, updated_highlight; + var textToHighlight=infos["full_text"], doSyntaxOpti = false, doHtmlOpti = false, stay_begin="", stay_end="", trace_new , trace_last; + + if(t.last_text_to_highlight==infos["full_text"] && t.resync_highlight!==true) + return; + + // OPTIMISATION: will search to update only changed lines + if(t.reload_highlight===true){ + t.reload_highlight=false; + }else if(textToHighlight.length==0){ + textToHighlight="\n "; + }else{ + // get text change datas + changes = t.checkTextEvolution(t.last_text_to_highlight,textToHighlight); + + // check if it can only reparse the changed text + trace_new = t.get_syntax_trace(changes.newTextLine).replace(/\r/g, ''); + trace_last = t.get_syntax_trace(changes.lastTextLine).replace(/\r/g, ''); + doSyntaxOpti = ( trace_new == trace_last ); + + // check if the difference comes only from a new line created + // => we have to remember that the editor can automaticaly add tabulation or space after the new line) + if( !doSyntaxOpti && trace_new == "\n"+trace_last && /^[ \t\s]*\n[ \t\s]*$/.test( changes.newText.replace(/\r/g, '') ) && changes.lastText =="" ) + { + doSyntaxOpti = true; + } + + // we do the syntax optimisation + if( doSyntaxOpti ){ + + tps_middle_opti=new Date().getTime(); + + stay_begin= t.last_hightlighted_text.split("\n").slice(0, changes.lineStart).join("\n"); + if(changes.lineStart>0) + stay_begin+= "\n"; + stay_end= t.last_hightlighted_text.split("\n").slice(changes.lineLastEnd+1).join("\n"); + if(stay_end.length>0) + stay_end= "\n"+stay_end; + + // Final check to see that we're not in the middle of span tags + if( stay_begin.split(' trace: "+trace_new + +"\nchanged_last_text: "+ch.lastText+" => trace: "+trace_last + //debug_opti+= "\nchanged: "+ infos["full_text"].substring(ch.posStart, ch.posNewEnd); + + "\nchanged_line: "+ch.newTextLine + + "\nlast_changed_line: "+ch.lastTextLine + +"\nstay_begin: "+ stay_begin.slice(-100) + +"\nstay_end: "+ stay_end.substr( 0, 100 ); + //debug_opti="start: "+stay_begin_len+ "("+nb_line_start_unchanged+") end: "+ (stay_end_len)+ "("+(splited.length-nb_line_end_unchanged)+") "; + //debug_opti+="changed: "+ textToHighlight.substring(stay_begin_len, textToHighlight.length-stay_end_len)+" \n"; + + //debug_opti+="changed: "+ stay_begin.substr(stay_begin.length-200)+ "----------"+ textToHighlight+"------------------"+ stay_end.substr(0,200) +"\n"; + +"\n"; + } + + + // END OPTIMISATION + } + + tps_end_opti = new Date().getTime(); + + // apply highlight + updated_highlight = t.colorize_text(textToHighlight); + tpsAfterReg = new Date().getTime(); + + /*** + * see if we can optimize for updating only the required part of the HTML code + * + * The goal here will be to find the text node concerned by the modification and to update it + */ + //------------------------------------------- + + // disable latest optimization tricks (introduced in 0.8.1 and removed in 0.8.2), TODO: check for another try later + doSyntaxOpti = doHtmlOpti = false; + if( doSyntaxOpti ) + { + try + { + var replacedBloc, i, nbStart = '', nbEnd = '', newHtml, lengthOld, lengthNew; + replacedBloc = t.last_hightlighted_text.substring( stay_begin.length, t.last_hightlighted_text.length - stay_end.length ); + + lengthOld = replacedBloc.length; + lengthNew = updated_highlight.length; + + // find the identical caracters at the beginning + for( i=0; i < lengthOld && i < lengthNew && replacedBloc.charAt(i) == updated_highlight.charAt(i) ; i++ ) + { + } + nbStart = i; + // find the identical caracters at the end + for( i=0; i + nbStart < lengthOld && i + nbStart < lengthNew && replacedBloc.charAt(lengthOld-i-1) == updated_highlight.charAt(lengthNew-i-1) ; i++ ) + { + } + nbEnd = i; + //console.log( nbStart, nbEnd, replacedBloc, updated_highlight ); + // get the changes + lastHtml = replacedBloc.substring( nbStart, lengthOld - nbEnd ); + newHtml = updated_highlight.substring( nbStart, lengthNew - nbEnd ); + + // We can do the optimisation only if we havn't touch to span elements + if( newHtml.indexOf('').replace( /&/g, '&'); + + nbOpendedSpan = beginStr.split(' 0 ) + { + nbClosed--; + parentSpan = parentSpan.parentNode; + } + + // find the position of the last opended tag + while( parentSpan.parentNode != t.content_highlight && parentSpan.parentNode.tagName != 'PRE' && ( tmpMaxStartOffset = Math.max( 0, beginStr.lastIndexOf( '', maxStartOffset ) ); + + // count the number of sub spans + nbSubSpanBefore = beginStr.substr( lastEndPos ).split('' ) ) == -1 ? beginStr.length : beginStr.length - ( lastIndex + 1 ); + //nbUnchangedChars = ? beginStr.length : beginStr.substr( lastIndex + 1 ).replace( /</g, '<').replace( />/g, '>').replace( /&/g, '&').length; + + if( ( lastIndex = beginStr.lastIndexOf( '>' ) ) == -1 ) + { + nbUnchangedChars = beginStr.length; + } + else + { + nbUnchangedChars = beginStr.substr( lastIndex + 1 ).replace( /</g, '<').replace( />/g, '>').replace( /&/g, '&').length; + //nbUnchangedChars += beginStr.substr( ).replace( /&/g, '&').replace( //g, '>').length - beginStr.length; + } + //alert( nbUnchangedChars ); + // console.log( span, textNode, nbOpendedSpan,nbClosedSpan, span.nextSibling, textNode.length, nbUnchangedChars, lastHtml, lastHtml.length, newHtml, newHtml.length ); + // alert( textNode.parentNode.className +'-'+ textNode.parentNode.tagName+"\n"+ textNode.data +"\n"+ nbUnchangedChars +"\n"+ lastHtml.length +"\n"+ newHtml +"\n"+ newHtml.length ); + // console.log( nbUnchangedChars, lastIndex, beginStr.length, beginStr.replace(/&/g, '&'), lastHtml.length, '|', newHtml.replace( /\t/g, 't').replace( /\n/g, 'n').replace( /\r/g, 'r'), lastHtml.replace( /\t/g, 't').replace( /\n/g, 'n').replace( /\r/, 'r') ); + // console.log( textNode.data.replace(/&/g, '&') ); + // IE only manage \r for cariage return in textNode and not \n or \r\n + if( t.isIE ) + { + nbUnchangedChars -= ( beginStr.substr( beginStr.length - nbUnchangedChars ).split("\n").length - 1 ); + //alert( textNode.data.replace(/\r/g, '_r').replace(/\n/g, '_n')); + textNode.replaceData( nbUnchangedChars, lastHtml.replace(/\n/g, '').length, newHtml.replace(/\n/g, '') ); + } + else + { + textNode.replaceData( nbUnchangedChars, lastHtml.length, newHtml ); + } + //--------] + } + } + // an exception shouldn't occured but if replaceData failed at least it won't break everything + catch( e ) + { + // throw e; + // console.log( e ); + doHtmlOpti = false; + } + + } + + /*** END HTML update's optimisation ***/ + // end test + + // console.log( (TPS6-TPS5), (TPS5-TPS4), (TPS4-TPS3), (TPS3-TPS2), (TPS2-TPS1), _CPT ); + // get the new highlight content + tpsAfterOpti2 = new Date().getTime(); + hightlighted_text = stay_begin + updated_highlight + stay_end; + if( !doHtmlOpti ) + { + // update the content of the highlight div by first updating a clone node (as there is no display in the same time for t node it's quite faster (5*)) + var new_Obj= t.content_highlight.cloneNode(false); + if( ( t.isIE && t.isIE < 8 ) || ( t.isOpera && t.isOpera < 9.6 ) ) + new_Obj.innerHTML= "
" + hightlighted_text + "
"; + else + new_Obj.innerHTML= ""+ hightlighted_text +""; + + t.content_highlight.parentNode.replaceChild(new_Obj, t.content_highlight); + + t.content_highlight= new_Obj; + } + + t.last_text_to_highlight= infos["full_text"]; + t.last_hightlighted_text= hightlighted_text; + + tps3=new Date().getTime(); + + if(t.settings["debug"]){ + //lineNumber=tab_text.length; + //t.debug.value+=" \nNB char: "+_$("src").value.length+" Nb line: "+ lineNumber; + + t.debug.value= "Tps optimisation "+(tps_end_opti-tps_start) + +" | tps reg exp: "+ (tpsAfterReg-tps_end_opti) + +" | tps opti HTML : "+ (tpsAfterOpti2-tpsAfterReg) + ' '+ ( doHtmlOpti ? 'yes' : 'no' ) + +" | tps update highlight content: "+ (tps3-tpsAfterOpti2) + +" | tpsTotal: "+ (tps3-tps_start) + + "("+tps3+")\n"+ debug_opti; + // t.debug.value+= "highlight\n"+hightlighted_text;*/ + } + + }; + + EditArea.prototype.resync_highlight= function(reload_now){ + this.reload_highlight=true; + this.last_text_to_highlight=""; + this.focus(); + if(reload_now) + this.check_line_selection(false); + }; ADDED applications/admin/static/edit_area/images/autocompletion.gif Index: applications/admin/static/edit_area/images/autocompletion.gif ================================================================== --- /dev/null +++ applications/admin/static/edit_area/images/autocompletion.gif cannot compute difference between binary files ADDED applications/admin/static/edit_area/images/close.gif Index: applications/admin/static/edit_area/images/close.gif ================================================================== --- /dev/null +++ applications/admin/static/edit_area/images/close.gif cannot compute difference between binary files ADDED applications/admin/static/edit_area/images/fullscreen.gif Index: applications/admin/static/edit_area/images/fullscreen.gif ================================================================== --- /dev/null +++ applications/admin/static/edit_area/images/fullscreen.gif cannot compute difference between binary files ADDED applications/admin/static/edit_area/images/go_to_line.gif Index: applications/admin/static/edit_area/images/go_to_line.gif ================================================================== --- /dev/null +++ applications/admin/static/edit_area/images/go_to_line.gif cannot compute difference between binary files ADDED applications/admin/static/edit_area/images/help.gif Index: applications/admin/static/edit_area/images/help.gif ================================================================== --- /dev/null +++ applications/admin/static/edit_area/images/help.gif cannot compute difference between binary files ADDED applications/admin/static/edit_area/images/highlight.gif Index: applications/admin/static/edit_area/images/highlight.gif ================================================================== --- /dev/null +++ applications/admin/static/edit_area/images/highlight.gif cannot compute difference between binary files ADDED applications/admin/static/edit_area/images/load.gif Index: applications/admin/static/edit_area/images/load.gif ================================================================== --- /dev/null +++ applications/admin/static/edit_area/images/load.gif cannot compute difference between binary files ADDED applications/admin/static/edit_area/images/move.gif Index: applications/admin/static/edit_area/images/move.gif ================================================================== --- /dev/null +++ applications/admin/static/edit_area/images/move.gif cannot compute difference between binary files ADDED applications/admin/static/edit_area/images/newdocument.gif Index: applications/admin/static/edit_area/images/newdocument.gif ================================================================== --- /dev/null +++ applications/admin/static/edit_area/images/newdocument.gif cannot compute difference between binary files ADDED applications/admin/static/edit_area/images/opacity.png Index: applications/admin/static/edit_area/images/opacity.png ================================================================== --- /dev/null +++ applications/admin/static/edit_area/images/opacity.png cannot compute difference between binary files ADDED applications/admin/static/edit_area/images/processing.gif Index: applications/admin/static/edit_area/images/processing.gif ================================================================== --- /dev/null +++ applications/admin/static/edit_area/images/processing.gif cannot compute difference between binary files ADDED applications/admin/static/edit_area/images/redo.gif Index: applications/admin/static/edit_area/images/redo.gif ================================================================== --- /dev/null +++ applications/admin/static/edit_area/images/redo.gif cannot compute difference between binary files ADDED applications/admin/static/edit_area/images/reset_highlight.gif Index: applications/admin/static/edit_area/images/reset_highlight.gif ================================================================== --- /dev/null +++ applications/admin/static/edit_area/images/reset_highlight.gif cannot compute difference between binary files ADDED applications/admin/static/edit_area/images/save.gif Index: applications/admin/static/edit_area/images/save.gif ================================================================== --- /dev/null +++ applications/admin/static/edit_area/images/save.gif cannot compute difference between binary files ADDED applications/admin/static/edit_area/images/search.gif Index: applications/admin/static/edit_area/images/search.gif ================================================================== --- /dev/null +++ applications/admin/static/edit_area/images/search.gif cannot compute difference between binary files ADDED applications/admin/static/edit_area/images/smooth_selection.gif Index: applications/admin/static/edit_area/images/smooth_selection.gif ================================================================== --- /dev/null +++ applications/admin/static/edit_area/images/smooth_selection.gif cannot compute difference between binary files ADDED applications/admin/static/edit_area/images/spacer.gif Index: applications/admin/static/edit_area/images/spacer.gif ================================================================== --- /dev/null +++ applications/admin/static/edit_area/images/spacer.gif cannot compute difference between binary files ADDED applications/admin/static/edit_area/images/statusbar_resize.gif Index: applications/admin/static/edit_area/images/statusbar_resize.gif ================================================================== --- /dev/null +++ applications/admin/static/edit_area/images/statusbar_resize.gif cannot compute difference between binary files ADDED applications/admin/static/edit_area/images/undo.gif Index: applications/admin/static/edit_area/images/undo.gif ================================================================== --- /dev/null +++ applications/admin/static/edit_area/images/undo.gif cannot compute difference between binary files ADDED applications/admin/static/edit_area/images/word_wrap.gif Index: applications/admin/static/edit_area/images/word_wrap.gif ================================================================== --- /dev/null +++ applications/admin/static/edit_area/images/word_wrap.gif cannot compute difference between binary files ADDED applications/admin/static/edit_area/keyboard.js Index: applications/admin/static/edit_area/keyboard.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/keyboard.js @@ -0,0 +1,145 @@ +var EA_keys = {8:"Retour arriere",9:"Tabulation",12:"Milieu (pave numerique)",13:"Entrer",16:"Shift",17:"Ctrl",18:"Alt",19:"Pause",20:"Verr Maj",27:"Esc",32:"Space",33:"Page up",34:"Page down",35:"End",36:"Begin",37:"Left",38:"Up",39:"Right",40:"Down",44:"Impr ecran",45:"Inser",46:"Suppr",91:"Menu Demarrer Windows / touche pomme Mac",92:"Menu Demarrer Windows",93:"Menu contextuel Windows",112:"F1",113:"F2",114:"F3",115:"F4",116:"F5",117:"F6",118:"F7",119:"F8",120:"F9",121:"F10",122:"F11",123:"F12",144:"Verr Num",145:"Arret defil"}; + + + +function keyDown(e){ + if(!e){ // if IE + e=event; + } + + // send the event to the plugins + for(var i in editArea.plugins){ + if(typeof(editArea.plugins[i].onkeydown)=="function"){ + if(editArea.plugins[i].onkeydown(e)===false){ // stop propaging + if(editArea.isIE) + e.keyCode=0; + return false; + } + } + } + + var target_id=(e.target || e.srcElement).id; + var use=false; + if (EA_keys[e.keyCode]) + letter=EA_keys[e.keyCode]; + else + letter=String.fromCharCode(e.keyCode); + + var low_letter= letter.toLowerCase(); + + if(letter=="Page up" && !AltPressed(e) && !editArea.isOpera){ + editArea.execCommand("scroll_page", {"dir": "up", "shift": ShiftPressed(e)}); + use=true; + }else if(letter=="Page down" && !AltPressed(e) && !editArea.isOpera){ + editArea.execCommand("scroll_page", {"dir": "down", "shift": ShiftPressed(e)}); + use=true; + }else if(editArea.is_editable==false){ + // do nothing but also do nothing else (allow to navigate with page up and page down) + return true; + }else if(letter=="Tabulation" && target_id=="textarea" && !CtrlPressed(e) && !AltPressed(e)){ + if(ShiftPressed(e)) + editArea.execCommand("invert_tab_selection"); + else + editArea.execCommand("tab_selection"); + + use=true; + if(editArea.isOpera || (editArea.isFirefox && editArea.isMac) ) // opera && firefox mac can't cancel tabulation events... + setTimeout("editArea.execCommand('focus');", 1); + }else if(letter=="Entrer" && target_id=="textarea"){ + if(editArea.press_enter()) + use=true; + }else if(letter=="Entrer" && target_id=="area_search"){ + editArea.execCommand("area_search"); + use=true; + }else if(letter=="Esc"){ + editArea.execCommand("close_all_inline_popup", e); + use=true; + }else if(CtrlPressed(e) && !AltPressed(e) && !ShiftPressed(e)){ + switch(low_letter){ + case "f": + editArea.execCommand("area_search"); + use=true; + break; + case "r": + editArea.execCommand("area_replace"); + use=true; + break; + case "q": + editArea.execCommand("close_all_inline_popup", e); + use=true; + break; + case "h": + editArea.execCommand("change_highlight"); + use=true; + break; + case "g": + setTimeout("editArea.execCommand('go_to_line');", 5); // the prompt stop the return false otherwise + use=true; + break; + case "e": + editArea.execCommand("show_help"); + use=true; + break; + case "z": + use=true; + editArea.execCommand("undo"); + break; + case "y": + use=true; + editArea.execCommand("redo"); + break; + default: + break; + } + } + + // check to disable the redo possibility if the textarea content change + if(editArea.next.length > 0){ + setTimeout("editArea.check_redo();", 10); + } + + setTimeout("editArea.check_file_changes();", 10); + + + if(use){ + // in case of a control that sould'nt be used by IE but that is used => THROW a javascript error that will stop key action + if(editArea.isIE) + e.keyCode=0; + return false; + } + //alert("Test: "+ letter + " ("+e.keyCode+") ALT: "+ AltPressed(e) + " CTRL "+ CtrlPressed(e) + " SHIFT "+ ShiftPressed(e)); + + return true; + +}; + + +// return true if Alt key is pressed +function AltPressed(e) { + if (window.event) { + return (window.event.altKey); + } else { + if(e.modifiers) + return (e.altKey || (e.modifiers % 2)); + else + return e.altKey; + } +}; + +// return true if Ctrl key is pressed +function CtrlPressed(e) { + if (window.event) { + return (window.event.ctrlKey); + } else { + return (e.ctrlKey || (e.modifiers==2) || (e.modifiers==3) || (e.modifiers>5)); + } +}; + +// return true if Shift key is pressed +function ShiftPressed(e) { + if (window.event) { + return (window.event.shiftKey); + } else { + return (e.shiftKey || (e.modifiers>3)); + } +}; ADDED applications/admin/static/edit_area/langs/bg.js Index: applications/admin/static/edit_area/langs/bg.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/langs/bg.js @@ -0,0 +1,54 @@ +/* + * Bulgarian translation + * Author: Valentin Hristov + * Company: SOFTKIT Bulgarian + * Site: http://www.softkit-bg.com + */ +editAreaLoader.lang["bg"]={ +new_document: "нов документ", +search_button: "търсене и замяна", +search_command: "търси следващия / отвори прозорец с търсачка", +search: "търсене", +replace: "замяна", +replace_command: "замяна / отвори прозорец с търсачка", +find_next: "намери следващия", +replace_all: "замени всички", +reg_exp: "реголярни изрази", +match_case: "чуствителен към регистъра", +not_found: "няма резултат.", +occurrence_replaced: "замяната е осъществена.", +search_field_empty: "Полето за търсене е празно", +restart_search_at_begin: "До края на документа. Почни с началото.", +move_popup: "премести прозореца с търсачката", +font_size: "--Размер на шрифта--", +go_to_line: "премени към реда", +go_to_line_prompt: "премени към номера на реда:", +undo: "отмени", +redo: "върни", +change_smooth_selection: "включи/изключи някой от функциите за преглед (по красиво, но повече натоварва)", +highlight: "превключване на оцветяване на синтаксиса включена/изключена", +reset_highlight: "въстанови оцветяване на синтаксиса (ако не е синхронизиран с текста)", +word_wrap: "режим на пренасяне на дълги редове", +help: "за програмата", +save: "съхрани", +load: "зареди", +line_abbr: "Стр", +char_abbr: "Стлб", +position: "Позиция", +total: "Всичко", +close_popup: "затвори прозореца", +shortcuts: "Бързи клавиши", +add_tab: "добави табулация в текста", +remove_tab: "премахни табулацията в текста", +about_notice: "Внимание: използвайте функцията оцветяване на синтаксиса само за малки текстове", +toggle: "Превключи редактор", +accesskey: "Бърз клавиш", +tab: "Tab", +shift: "Shift", +ctrl: "Ctrl", +esc: "Esc", +processing: "Зареждане...", +fullscreen: "на цял екран", +syntax_selection: "--Синтаксис--", +close_tab: "Затвори файла" +}; ADDED applications/admin/static/edit_area/langs/cs.js Index: applications/admin/static/edit_area/langs/cs.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/langs/cs.js @@ -0,0 +1,48 @@ +editAreaLoader.lang["cs"]={ +new_document: "Nový dokument", +search_button: "Najdi a nahraď", +search_command: "Hledej další / otevři vyhledávací pole", +search: "Hledej", +replace: "Nahraď", +replace_command: "Nahraď / otevři vyhledávací pole", +find_next: "Najdi další", +replace_all: "Nahraď vše", +reg_exp: "platné výrazy", +match_case: "vyhodnocené výrazy", +not_found: "nenalezené.", +occurrence_replaced: "výskyty nahrazené.", +search_field_empty: "Pole vyhledávání je prázdné", +restart_search_at_begin: "Dosažen konec souboru, začínám od začátku.", +move_popup: "Přesuň vyhledávací okno", +font_size: "--Velikost textu--", +go_to_line: "Přejdi na řádek", +go_to_line_prompt: "Přejdi na řádek:", +undo: "krok zpět", +redo: "znovu", +change_smooth_selection: "Povolit nebo zakázat některé ze zobrazených funkcí (účelnější zobrazení požaduje větší zatížení procesoru)", +highlight: "Zvýrazňování syntaxe zap./vyp.", +reset_highlight: "Obnovit zvýraznění (v případě nesrovnalostí)", +word_wrap: "toggle word wrapping mode", +help: "O programu", +save: "Uložit", +load: "Otevřít", +line_abbr: "Ř.", +char_abbr: "S.", +position: "Pozice", +total: "Celkem", +close_popup: "Zavřít okno", +shortcuts: "Zkratky", +add_tab: "Přidat tabulování textu", +remove_tab: "Odtsranit tabulování textu", +about_notice: "Upozornění! Funkce zvýrazňování textu je k dispozici pouze pro malý text", +toggle: "Přepnout editor", +accesskey: "Přístupová klávesa", +tab: "Záložka", +shift: "Shift", +ctrl: "Ctrl", +esc: "Esc", +processing: "Zpracovávám ...", +fullscreen: "Celá obrazovka", +syntax_selection: "--vyber zvýrazňovač--", +close_tab: "Close file" +}; ADDED applications/admin/static/edit_area/langs/de.js Index: applications/admin/static/edit_area/langs/de.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/langs/de.js @@ -0,0 +1,48 @@ +editAreaLoader.lang["de"]={ +new_document: "Neues Dokument", +search_button: "Suchen und Ersetzen", +search_command: "Weitersuchen / öffne Suchfeld", +search: "Suchen", +replace: "Ersetzen", +replace_command: "Ersetzen / öffne Suchfeld", +find_next: "Weitersuchen", +replace_all: "Ersetze alle Treffer", +reg_exp: "reguläre Ausdrücke", +match_case: "passt auf den Begriff
", +not_found: "Nicht gefunden.", +occurrence_replaced: "Die Vorkommen wurden ersetzt.", +search_field_empty: "Leeres Suchfeld", +restart_search_at_begin: "Ende des zu durchsuchenden Bereiches erreicht. Es wird die Suche von Anfang an fortgesetzt.", //find a shorter translation +move_popup: "Suchfenster bewegen", +font_size: "--Schriftgröße--", +go_to_line: "Gehe zu Zeile", +go_to_line_prompt: "Gehe zu Zeilennummmer:", +undo: "Rückgängig", +redo: "Wiederherstellen", +change_smooth_selection: "Aktiviere/Deaktiviere einige Features (weniger Bildschirmnutzung aber mehr CPU-Belastung)", +highlight: "Syntax Highlighting an- und ausschalten", +reset_highlight: "Highlighting zurücksetzen (falls mit Text nicht konform)", +word_wrap: "Toggle word wrapping mode", +help: "Info", +save: "Speichern", +load: "Öffnen", +line_abbr: "Ln", +char_abbr: "Ch", +position: "Position", +total: "Gesamt", +close_popup: "Popup schließen", +shortcuts: "Shortcuts", +add_tab: "Tab zum Text hinzufügen", +remove_tab: "Tab aus Text entfernen", +about_notice: "Bemerkung: Syntax Highlighting ist nur für kurze Texte", +toggle: "Editor an- und ausschalten", +accesskey: "Accesskey", +tab: "Tab", +shift: "Shift", +ctrl: "Ctrl", +esc: "Esc", +processing: "In Bearbeitung...", +fullscreen: "Full-Screen", +syntax_selection: "--Syntax--", +close_tab: "Close file" +}; ADDED applications/admin/static/edit_area/langs/dk.js Index: applications/admin/static/edit_area/langs/dk.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/langs/dk.js @@ -0,0 +1,48 @@ +editAreaLoader.lang["dk"]={ +new_document: "nyt tomt dokument", +search_button: "søg og erstat", +search_command: "find næste / åben søgefelt", +search: "søg", +replace: "erstat", +replace_command: "erstat / åben søgefelt", +find_next: "find næste", +replace_all: "erstat alle", +reg_exp: "regular expressions", +match_case: "forskel på store/små bogstaver
", +not_found: "not found.", +occurrence_replaced: "occurences replaced.", +search_field_empty: "Search field empty", +restart_search_at_begin: "End of area reached. Restart at begin.", +move_popup: "flyt søgepopup", +font_size: "--Skriftstørrelse--", +go_to_line: "gå til linie", +go_to_line_prompt: "gå til linienummer:", +undo: "fortryd", +redo: "gentag", +change_smooth_selection: "slå display funktioner til/fra (smartere display men mere CPU krævende)", +highlight: "slå syntax highlight til/fra", +reset_highlight: "nulstil highlight (hvis den er desynkroniseret fra teksten)", +word_wrap: "toggle word wrapping mode", +help: "om", +save: "gem", +load: "hent", +line_abbr: "Ln", +char_abbr: "Ch", +position: "Position", +total: "Total", +close_popup: "luk popup", +shortcuts: "Genveje", +add_tab: "tilføj tabulation til tekst", +remove_tab: "fjern tabulation fra tekst", +about_notice: "Husk: syntax highlight funktionen bør kun bruge til små tekster", +toggle: "Slå editor til / fra", +accesskey: "Accesskey", +tab: "Tab", +shift: "Skift", +ctrl: "Ctrl", +esc: "Esc", +processing: "Processing...", +fullscreen: "fullscreen", +syntax_selection: "--Syntax--", +close_tab: "Close file" +}; ADDED applications/admin/static/edit_area/langs/en.js Index: applications/admin/static/edit_area/langs/en.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/langs/en.js @@ -0,0 +1,48 @@ +editAreaLoader.lang["en"]={ +new_document: "new empty document", +search_button: "search and replace", +search_command: "search next / open search area", +search: "search", +replace: "replace", +replace_command: "replace / open search area", +find_next: "find next", +replace_all: "replace all", +reg_exp: "regular expressions", +match_case: "match case", +not_found: "not found.", +occurrence_replaced: "occurences replaced.", +search_field_empty: "Search field empty", +restart_search_at_begin: "End of area reached. Restart at begin.", +move_popup: "move search popup", +font_size: "--Font size--", +go_to_line: "go to line", +go_to_line_prompt: "go to line number:", +undo: "undo", +redo: "redo", +change_smooth_selection: "enable/disable some display features (smarter display but more CPU charge)", +highlight: "toggle syntax highlight on/off", +reset_highlight: "reset highlight (if desyncronized from text)", +word_wrap: "toggle word wrapping mode", +help: "about", +save: "save", +load: "load", +line_abbr: "Ln", +char_abbr: "Ch", +position: "Position", +total: "Total", +close_popup: "close popup", +shortcuts: "Shortcuts", +add_tab: "add tabulation to text", +remove_tab: "remove tabulation to text", +about_notice: "Notice: syntax highlight function is only for small text", +toggle: "Toggle editor", +accesskey: "Accesskey", +tab: "Tab", +shift: "Shift", +ctrl: "Ctrl", +esc: "Esc", +processing: "Processing...", +fullscreen: "fullscreen", +syntax_selection: "--Syntax--", +close_tab: "Close file" +}; ADDED applications/admin/static/edit_area/langs/eo.js Index: applications/admin/static/edit_area/langs/eo.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/langs/eo.js @@ -0,0 +1,48 @@ +editAreaLoader.lang["eo"]={ +new_document: "nova dokumento (vakigas la enhavon)", +search_button: "serĉi / anstataŭigi", +search_command: "pluserĉi / malfermi la serĉo-fenestron", +search: "serĉi", +replace: "anstataŭigi", +replace_command: "anstataŭigi / malfermi la serĉo-fenestron", +find_next: "serĉi", +replace_all: "anstataŭigi ĉion", +reg_exp: "regula esprimo", +match_case: "respekti la usklecon", +not_found: "ne trovita.", +occurrence_replaced: "anstataŭigoj plenumitaj.", +search_field_empty: "La kampo estas malplena.", +restart_search_at_begin: "Fino de teksto ĝisrirata, ĉu daŭrigi el la komenco?", +move_popup: "movi la serĉo-fenestron", +font_size: "--Tipara grando--", +go_to_line: "iri al la linio", +go_to_line_prompt: "iri al la linio numero:", +undo: "rezigni", +redo: "refari", +change_smooth_selection: "ebligi/malebligi la funkcioj de vidigo (pli bona vidigo, sed pli da ŝarĝo de la ĉeforgano)", +highlight: "ebligi/malebligi la sintaksan kolorigon", +reset_highlight: "repravalorizi la sintaksan kolorigon (se malsinkronigon de la teksto)", +word_wrap: "toggle word wrapping mode", +help: "pri", +save: "registri", +load: "ŝarĝi", +line_abbr: "Ln", +char_abbr: "Sg", +position: "Pozicio", +total: "Sumo", +close_popup: "fermi la ŝprucfenestron", +shortcuts: "Fulmoklavo", +add_tab: "aldoni tabon en la tekston", +remove_tab: "forigi tablon el la teksto", +about_notice: "Noto: la sintaksa kolorigo estas nur prikalkulita por mallongaj tekstoj.", +toggle: "baskuligi la redaktilon", +accesskey: "Fulmoklavo", +tab: "Tab", +shift: "Maj", +ctrl: "Ktrl", +esc: "Esk", +processing: "ŝargante...", +fullscreen: "plenekrane", +syntax_selection: "--Sintakso--", +close_tab: "Fermi la dosieron" +}; ADDED applications/admin/static/edit_area/langs/es.js Index: applications/admin/static/edit_area/langs/es.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/langs/es.js @@ -0,0 +1,48 @@ +editAreaLoader.lang["es"]={ +new_document: "nuevo documento vacío", +search_button: "buscar y reemplazar", +search_command: "buscar siguiente / abrir área de búsqueda", +search: "buscar", +replace: "reemplazar", +replace_command: "reemplazar / abrir área de búsqueda", +find_next: "encontrar siguiente", +replace_all: "reemplazar todos", +reg_exp: "expresiones regulares", +match_case: "coincidir capitalización", +not_found: "no encontrado.", +occurrence_replaced: "ocurrencias reemplazadas.", +search_field_empty: "Campo de búsqueda vacío", +restart_search_at_begin: "Se ha llegado al final del área. Se va a seguir desde el principio.", +move_popup: "mover la ventana de búsqueda", +font_size: "--Tamaño de la fuente--", +go_to_line: "ir a la línea", +go_to_line_prompt: "ir a la línea número:", +undo: "deshacer", +redo: "rehacer", +change_smooth_selection: "activar/desactivar algunas características de visualización (visualización más inteligente pero más carga de CPU)", +highlight: "intercambiar resaltado de sintaxis", +reset_highlight: "reinicializar resaltado (si no esta sincronizado con el texto)", +word_wrap: "toggle word wrapping mode", +help: "acerca", +save: "guardar", +load: "cargar", +line_abbr: "Ln", +char_abbr: "Ch", +position: "Posición", +total: "Total", +close_popup: "recuadro de cierre", +shortcuts: "Atajos", +add_tab: "añadir tabulado al texto", +remove_tab: "borrar tabulado del texto", +about_notice: "Aviso: el resaltado de sintaxis sólo funciona para texto pequeño", +toggle: "Cambiar editor", +accesskey: "Tecla de acceso", +tab: "Tab", +shift: "Mayúsc", +ctrl: "Ctrl", +esc: "Esc", +processing: "Procesando...", +fullscreen: "pantalla completa", +syntax_selection: "--Syntax--", +close_tab: "Close file" +}; ADDED applications/admin/static/edit_area/langs/fi.js Index: applications/admin/static/edit_area/langs/fi.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/langs/fi.js @@ -0,0 +1,48 @@ +editAreaLoader.lang["fi"]={ +new_document: "uusi tyhjä dokumentti", +search_button: "etsi ja korvaa", +search_command: "etsi seuraava / avaa etsintävalikko", +search: "etsi", +replace: "korvaa", +replace_command: "korvaa / avaa etsintävalikko", +find_next: "etsi seuraava", +replace_all: "korvaa kaikki", +reg_exp: "säännölliset lausekkeet", +match_case: "täsmää kirjainkokoon", +not_found: "ei löytynyt.", +occurrence_replaced: "esiintymää korvattu.", +search_field_empty: "Haettava merkkijono on tyhjä", +restart_search_at_begin: "Alueen loppu saavutettiin. Aloitetaan alusta.", +move_popup: "siirrä etsintävalikkoa", +font_size: "--Fontin koko--", +go_to_line: "siirry riville", +go_to_line_prompt: "mene riville:", +undo: "peruuta", +redo: "tee uudelleen", +change_smooth_selection: "kytke/sammuta joitakin näyttötoimintoja (Älykkäämpi toiminta, mutta suurempi CPU kuormitus)", +highlight: "kytke syntaksikorostus päälle/pois", +reset_highlight: "resetoi syntaksikorostus (jos teksti ei ole synkassa korostuksen kanssa)", +word_wrap: "toggle word wrapping mode", +help: "tietoja", +save: "tallenna", +load: "lataa", +line_abbr: "Rv", +char_abbr: "Pos", +position: "Paikka", +total: "Yhteensä", +close_popup: "sulje valikko", +shortcuts: "Pikatoiminnot", +add_tab: "lisää sisennys tekstiin", +remove_tab: "poista sisennys tekstistä", +about_notice: "Huomautus: syntaksinkorostus toimii vain pienelle tekstille", +toggle: "Kytke editori", +accesskey: "Pikanäppäin", +tab: "Tab", +shift: "Shift", +ctrl: "Ctrl", +esc: "Esc", +processing: "Odota...", +fullscreen: "koko ruutu", +syntax_selection: "--Syntaksi--", +close_tab: "Sulje tiedosto" +}; ADDED applications/admin/static/edit_area/langs/fr.js Index: applications/admin/static/edit_area/langs/fr.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/langs/fr.js @@ -0,0 +1,48 @@ +editAreaLoader.lang["fr"]={ +new_document: "nouveau document (efface le contenu)", +search_button: "rechercher / remplacer", +search_command: "rechercher suivant / ouvrir la fenêtre de recherche", +search: "rechercher", +replace: "remplacer", +replace_command: "remplacer / ouvrir la fenêtre de recherche", +find_next: "rechercher", +replace_all: "tout remplacer", +reg_exp: "expr. régulière", +match_case: "respecter la casse", +not_found: "pas trouvé.", +occurrence_replaced: "remplacements éffectués.", +search_field_empty: "Le champ de recherche est vide.", +restart_search_at_begin: "Fin du texte atteint, poursuite au début.", +move_popup: "déplacer la fenêtre de recherche", +font_size: "--Taille police--", +go_to_line: "aller à la ligne", +go_to_line_prompt: "aller a la ligne numero:", +undo: "annuler", +redo: "refaire", +change_smooth_selection: "activer/désactiver des fonctions d'affichage (meilleur affichage mais plus de charge processeur)", +highlight: "activer/désactiver la coloration syntaxique", +reset_highlight: "réinitialiser la coloration syntaxique (si désyncronisée du texte)", +word_wrap: "activer/désactiver les retours à la ligne automatiques", +help: "à propos", +save: "sauvegarder", +load: "charger", +line_abbr: "Ln", +char_abbr: "Ch", +position: "Position", +total: "Total", +close_popup: "fermer le popup", +shortcuts: "Racourcis clavier", +add_tab: "ajouter une tabulation dans le texte", +remove_tab: "retirer une tabulation dans le texte", +about_notice: "Note: la coloration syntaxique n'est prévue que pour de courts textes.", +toggle: "basculer l'éditeur", +accesskey: "Accesskey", +tab: "Tab", +shift: "Maj", +ctrl: "Ctrl", +esc: "Esc", +processing: "chargement...", +fullscreen: "plein écran", +syntax_selection: "--Syntaxe--", +close_tab: "Fermer le fichier" +}; ADDED applications/admin/static/edit_area/langs/hr.js Index: applications/admin/static/edit_area/langs/hr.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/langs/hr.js @@ -0,0 +1,48 @@ +editAreaLoader.lang["hr"]={ +new_document: "Novi dokument", +search_button: "Traži i izmijeni", +search_command: "Traži dalje / Otvori prozor za traženje", +search: "Traži", +replace: "Izmijeni", +replace_command: "Izmijeni / Otvori prozor za traženje", +find_next: "Traži dalje", +replace_all: "Izmjeni sve", +reg_exp: "Regularni izrazi", +match_case: "Bitna vel. slova", +not_found: "nije naðeno.", +occurrence_replaced: "izmjenjenih.", +search_field_empty: "Prazno polje za traženje!", +restart_search_at_begin: "Došao do kraja. Poèeo od poèetka.", +move_popup: "Pomakni prozor", +font_size: "--Velièina teksta--", +go_to_line: "Odi na redak", +go_to_line_prompt: "Odi na redak:", +undo: "Vrati natrag", +redo: "Napravi ponovo", +change_smooth_selection: "Ukljuèi/iskljuèi neke moguænosti prikaza (pametniji prikaz, ali zagušeniji CPU)", +highlight: "Ukljuèi/iskljuèi bojanje sintakse", +reset_highlight: "Ponovi kolorizaciju (ako je nesinkronizirana s tekstom)", +word_wrap: "toggle word wrapping mode", +help: "O edit_area", +save: "Spremi", +load: "Uèitaj", +line_abbr: "Ln", +char_abbr: "Zn", +position: "Pozicija", +total: "Ukupno", +close_popup: "Zatvori prozor", +shortcuts: "Kratice", +add_tab: "Dodaj tabulaciju", +remove_tab: "Makni tabulaciju", +about_notice: "Napomena: koloriziranje sintakse je samo za kratke kodove", +toggle: "Prebaci naèin ureðivanja", +accesskey: "Accesskey", +tab: "Tab", +shift: "Shift", +ctrl: "Ctrl", +esc: "Esc", +processing: "Procesiram...", +fullscreen: "Cijeli prozor", +syntax_selection: "--Syntax--", +close_tab: "Close file" +}; ADDED applications/admin/static/edit_area/langs/it.js Index: applications/admin/static/edit_area/langs/it.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/langs/it.js @@ -0,0 +1,48 @@ +editAreaLoader.lang["it"]={ +new_document: "nuovo documento vuoto", +search_button: "cerca e sostituisci", +search_command: "trova successivo / apri finestra di ricerca", +search: "cerca", +replace: "sostituisci", +replace_command: "sostituisci / apri finestra di ricerca", +find_next: "trova successivo", +replace_all: "sostituisci tutti", +reg_exp: "espressioni regolari", +match_case: "confronta maiuscole/minuscole
", +not_found: "non trovato.", +occurrence_replaced: "occorrenze sostituite.", +search_field_empty: "Campo ricerca vuoto", +restart_search_at_begin: "Fine del testo raggiunta. Ricomincio dall'inizio.", +move_popup: "sposta popup di ricerca", +font_size: "-- Dimensione --", +go_to_line: "vai alla linea", +go_to_line_prompt: "vai alla linea numero:", +undo: "annulla", +redo: "ripeti", +change_smooth_selection: "abilita/disabilita alcune caratteristiche della visualizzazione", +highlight: "abilita/disabilita colorazione della sintassi", +reset_highlight: "aggiorna colorazione (se non sincronizzata)", +word_wrap: "toggle word wrapping mode", +help: "informazioni su...", +save: "salva", +load: "carica", +line_abbr: "Ln", +char_abbr: "Ch", +position: "Posizione", +total: "Totale", +close_popup: "chiudi popup", +shortcuts: "Scorciatoie", +add_tab: "aggiungi tabulazione", +remove_tab: "rimuovi tabulazione", +about_notice: "Avviso: la colorazione della sintassi vale solo con testo piccolo", +toggle: "Abilita/disabilita editor", +accesskey: "Accesskey", +tab: "Tab", +shift: "Shift", +ctrl: "Ctrl", +esc: "Esc", +processing: "In corso...", +fullscreen: "fullscreen", +syntax_selection: "--Syntax--", +close_tab: "Close file" +}; ADDED applications/admin/static/edit_area/langs/ja.js Index: applications/admin/static/edit_area/langs/ja.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/langs/ja.js @@ -0,0 +1,48 @@ +editAreaLoader.lang["ja"]={ +new_document: "新規作成", +search_button: "検索・置換", +search_command: "次を検索 / 検索窓を表示", +search: "検索", +replace: "置換", +replace_command: "置換 / 置換窓を表示", +find_next: "次を検索", +replace_all: "全置換", +reg_exp: "正規表現", +match_case: "大文字小文字の区別", +not_found: "見つかりません。", +occurrence_replaced: "置換しました。", +search_field_empty: "検索対象文字列が空です。", +restart_search_at_begin: "終端に達しました、始めに戻ります", +move_popup: "検索窓を移動", +font_size: "--フォントサイズ--", +go_to_line: "指定行へ移動", +go_to_line_prompt: "指定行へ移動します:", +undo: "元に戻す", +redo: "やり直し", +change_smooth_selection: "スムース表示の切り替え（CPUを使います）", +highlight: "構文強調表示の切り替え", +reset_highlight: "構文強調表示のリセット", +word_wrap: "toggle word wrapping mode", +help: "ヘルプを表示", +save: "保存", +load: "読み込み", +line_abbr: "行", +char_abbr: "文字", +position: "位置", +total: "合計", +close_popup: "ポップアップを閉じる", +shortcuts: "ショートカット", +add_tab: "タブを挿入する", +remove_tab: "タブを削除する", +about_notice: "注意：構文強調表示は短いテキストでしか有効に機能しません。", +toggle: "テキストエリアとeditAreaの切り替え", +accesskey: "アクセスキー", +tab: "Tab", +shift: "Shift", +ctrl: "Ctrl", +esc: "Esc", +processing: "処理中です...", +fullscreen: "fullscreen", +syntax_selection: "--Syntax--", +close_tab: "Close file" +}; ADDED applications/admin/static/edit_area/langs/mk.js Index: applications/admin/static/edit_area/langs/mk.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/langs/mk.js @@ -0,0 +1,48 @@ +editAreaLoader.lang["mk"]={ +new_document: "Нов документ", +search_button: "Најди и замени", +search_command: "Барај следно / Отвори нов прозорец за пребарување", +search: "Барај", +replace: "Замени", +replace_command: "Замени / Отвори прозорец за пребарување", +find_next: "најди следно", +replace_all: "Замени ги сите", +reg_exp: "Регуларни изрази", +match_case: "Битна е големината на буквите", +not_found: "не е пронајдено.", +occurrence_replaced: "замени.", +search_field_empty: "Полето за пребарување е празно", +restart_search_at_begin: "Крај на областа. Стартувај од почеток.", +move_popup: "Помести го прозорецот", +font_size: "--Големина на текстот--", +go_to_line: "Оди на линија", +go_to_line_prompt: "Оди на линија со број:", +undo: "Врати", +redo: "Повтори", +change_smooth_selection: "Вклучи/исклучи некои карактеристики за приказ (попаметен приказ, но поголемо оптеретување за процесорот)", +highlight: "Вклучи/исклучи осветлување на синтакса", +reset_highlight: "Ресетирај го осветлувањето на синтакса (доколку е десинхронизиранo со текстот)", +word_wrap: "toggle word wrapping mode", +help: "За", +save: "Зачувај", +load: "Вчитај", +line_abbr: "Лн", +char_abbr: "Зн", +position: "Позиција", +total: "Вкупно", +close_popup: "Затвори го прозорецот", +shortcuts: "Кратенки", +add_tab: "Додај табулација на текстот", +remove_tab: "Отстрани ја табулацијата", +about_notice: "Напомена: Осветлувањето на синтанса е само за краток текст", +toggle: "Смени начин на уредување", +accesskey: "Accesskey", +tab: "Tab", +shift: "Shift", +ctrl: "Ctrl", +esc: "Esc", +processing: "Обработувам...", +fullscreen: "Цел прозорец", +syntax_selection: "--Синтакса--", +close_tab: "Избери датотека" +}; ADDED applications/admin/static/edit_area/langs/nl.js Index: applications/admin/static/edit_area/langs/nl.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/langs/nl.js @@ -0,0 +1,48 @@ +editAreaLoader.lang["nl"]={ +new_document: "nieuw leeg document", +search_button: "zoek en vervang", +search_command: "zoek volgende / zoekscherm openen", +search: "zoek", +replace: "vervang", +replace_command: "vervang / zoekscherm openen", +find_next: "volgende vinden", +replace_all: "alles vervangen", +reg_exp: "reguliere expressies", +match_case: "hoofdletter gevoelig", +not_found: "niet gevonden.", +occurrence_replaced: "object vervangen.", +search_field_empty: "Zoek veld leeg", +restart_search_at_begin: "Niet meer instanties gevonden, begin opnieuw", +move_popup: "versleep zoek scherm", +font_size: "--Letter grootte--", +go_to_line: "Ga naar regel", +go_to_line_prompt: "Ga naar regel nummer:", +undo: "Ongedaan maken", +redo: "Opnieuw doen", +change_smooth_selection: "zet wat schermopties aan/uit (kan langzamer zijn)", +highlight: "zet syntax highlight aan/uit", +reset_highlight: "reset highlight (indien gedesynchronizeerd)", +word_wrap: "toggle word wrapping mode", +help: "informatie", +save: "opslaan", +load: "laden", +line_abbr: "Ln", +char_abbr: "Ch", +position: "Positie", +total: "Totaal", +close_popup: "Popup sluiten", +shortcuts: "Snelkoppelingen", +add_tab: "voeg tabs toe in tekst", +remove_tab: "verwijder tabs uit tekst", +about_notice: "Notitie: syntax highlight functie is alleen voor kleine tekst", +toggle: "geavanceerde bewerkingsopties", +accesskey: "Accessknop", +tab: "Tab", +shift: "Shift", +ctrl: "Ctrl", +esc: "Esc", +processing: "Verwerken...", +fullscreen: "fullscreen", +syntax_selection: "--Syntax--", +close_tab: "Close file" +}; ADDED applications/admin/static/edit_area/langs/pl.js Index: applications/admin/static/edit_area/langs/pl.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/langs/pl.js @@ -0,0 +1,48 @@ +editAreaLoader.lang["pl"]={ +new_document: "nowy dokument", +search_button: "znajdź i zamień", +search_command: "znajdź następny", +search: "znajdź", +replace: "zamień", +replace_command: "zamień", +find_next: "następny", +replace_all: "zamień wszystko", +reg_exp: "wyrażenie regularne", +match_case: "uwzględnij wielkość liter
", +not_found: "nie znaleziono.", +occurrence_replaced: "wystąpień zamieniono.", +search_field_empty: "Nie wprowadzono tekstu", +restart_search_at_begin: "Koniec dokumentu. Wyszukiwanie od początku.", +move_popup: "przesuń okienko wyszukiwania", +font_size: "Rozmiar", +go_to_line: "idź do linii", +go_to_line_prompt: "numer linii:", +undo: "cofnij", +redo: "przywróć", +change_smooth_selection: "włącz/wyłącz niektóre opcje wyglądu (zaawansowane opcje wyglądu obciążają procesor)", +highlight: "włącz/wyłącz podświetlanie składni", +reset_highlight: "odśwież podświetlanie składni (jeśli rozsynchronizowało się z tekstem)", +word_wrap: "toggle word wrapping mode", +help: "o programie", +save: "zapisz", +load: "otwórz", +line_abbr: "Ln", +char_abbr: "Zn", +position: "Pozycja", +total: "W sumie", +close_popup: "zamknij okienko", +shortcuts: "Skróty klawiaturowe", +add_tab: "dodaj wcięcie do zaznaczonego tekstu", +remove_tab: "usuń wcięcie", +about_notice: "Uwaga: podświetlanie składni nie jest zalecane dla długich tekstów", +toggle: "Włącz/wyłącz edytor", +accesskey: "Alt+", +tab: "Tab", +shift: "Shift", +ctrl: "Ctrl", +esc: "Esc", +processing: "Przetwarzanie...", +fullscreen: "fullscreen", +syntax_selection: "--Syntax--", +close_tab: "Close file" +}; ADDED applications/admin/static/edit_area/langs/pt.js Index: applications/admin/static/edit_area/langs/pt.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/langs/pt.js @@ -0,0 +1,48 @@ +editAreaLoader.lang["pt"]={ +new_document: "Novo documento", +search_button: "Localizar e substituir", +search_command: "Localizar próximo", +search: "Localizar", +replace: "Substituir", +replace_command: "Substituir", +find_next: "Localizar", +replace_all: "Subst. tudo", +reg_exp: "Expressões regulares", +match_case: "Diferenciar maiúsculas e minúsculas", +not_found: "Não encontrado.", +occurrence_replaced: "Ocorrências substituidas", +search_field_empty: "Campo localizar vazio.", +restart_search_at_begin: "Fim das ocorrências. Recomeçar do inicio.", +move_popup: "Mover janela", +font_size: "--Tamanho da fonte--", +go_to_line: "Ir para linha", +go_to_line_prompt: "Ir para a linha:", +undo: "Desfazer", +redo: "Refazer", +change_smooth_selection: "Opções visuais", +highlight: "Cores de sintaxe", +reset_highlight: "Resetar cores (se não sincronizado)", +word_wrap: "toggle word wrapping mode", +help: "Sobre", +save: "Salvar", +load: "Carregar", +line_abbr: "Ln", +char_abbr: "Ch", +position: "Posição", +total: "Total", +close_popup: "Fechar", +shortcuts: "Shortcuts", +add_tab: "Adicionar tabulação", +remove_tab: "Remover tabulação", +about_notice: "Atenção: Cores de sintaxe são indicados somente para textos pequenos", +toggle: "Exibir editor", +accesskey: "Accesskey", +tab: "Tab", +shift: "Shift", +ctrl: "Ctrl", +esc: "Esc", +processing: "Processando...", +fullscreen: "fullscreen", +syntax_selection: "--Syntax--", +close_tab: "Close file" +}; ADDED applications/admin/static/edit_area/langs/ru.js Index: applications/admin/static/edit_area/langs/ru.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/langs/ru.js @@ -0,0 +1,48 @@ +editAreaLoader.lang["ru"]={ +new_document: "новый пустой документ", +search_button: "поиск и замена", +search_command: "искать следующий / открыть панель поиска", +search: "поиск", +replace: "замена", +replace_command: "заменить / открыть панель поиска", +find_next: "найти следующее", +replace_all: "заменить все", +reg_exp: "регулярное выражение", +match_case: "учитывать регистр", +not_found: "не найдено.", +occurrence_replaced: "вхождение заменено.", +search_field_empty: "Поле поиска пустое", +restart_search_at_begin: "Достигнут конец документа. Начинаю с начала.", +move_popup: "переместить окно поиска", +font_size: "--Размер шрифта--", +go_to_line: "перейти к строке", +go_to_line_prompt: "перейти к строке номер:", +undo: "отменить", +redo: "вернуть", +change_smooth_selection: "включить/отключить некоторые функции просмотра (более красиво, но больше использует процессор)", +highlight: "переключить подсветку синтаксиса включена/выключена", +reset_highlight: "восстановить подсветку (если разсинхронизирована от текста)", +word_wrap: "toggle word wrapping mode", +help: "о программе", +save: "сохранить", +load: "загрузить", +line_abbr: "Стр", +char_abbr: "Стлб", +position: "Позиция", +total: "Всего", +close_popup: "закрыть всплывающее окно", +shortcuts: "Горячие клавиши", +add_tab: "добавить табуляцию в текст", +remove_tab: "убрать табуляцию из текста", +about_notice: "Внимание: функция подсветки синтаксиса только для небольших текстов", +toggle: "Переключить редактор", +accesskey: "Горячая клавиша", +tab: "Tab", +shift: "Shift", +ctrl: "Ctrl", +esc: "Esc", +processing: "Обработка...", +fullscreen: "полный экран", +syntax_selection: "--Синтакс--", +close_tab: "Закрыть файл" +}; ADDED applications/admin/static/edit_area/langs/sk.js Index: applications/admin/static/edit_area/langs/sk.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/langs/sk.js @@ -0,0 +1,48 @@ +editAreaLoader.lang["sk"]={ +new_document: "nový prázdy dokument", +search_button: "vyhľadaj a nahraď", +search_command: "hľadaj ďalsšie / otvor vyhľadávacie pole", +search: "hľadaj", +replace: "nahraď", +replace_command: "nahraď / otvor vyhľadávacie pole", +find_next: "nájdi ďalšie", +replace_all: "nahraď všetko", +reg_exp: "platné výrazy", +match_case: "zhodujúce sa výrazy", +not_found: "nenájdené.", +occurrence_replaced: "výskyty nahradené.", +search_field_empty: "Pole vyhľadávanie je prádzne", +restart_search_at_begin: "End of area reached. Restart at begin.", +move_popup: "presuň vyhľadávacie okno", +font_size: "--Veľkosť textu--", +go_to_line: "prejdi na riadok", +go_to_line_prompt: "prejdi na riadok:", +undo: "krok späť", +redo: "prepracovať", +change_smooth_selection: "povoliť/zamietnúť niektoré zo zobrazených funkcií (účelnejšie zobrazenie vyžaduje väčšie zaťaženie procesora CPU)", +highlight: "prepnúť zvýrazňovanie syntaxe zap/vyp", +reset_highlight: "zrušiť zvýrazňovanie (ak je nesynchronizované s textom)", +word_wrap: "toggle word wrapping mode", +help: "o programe", +save: "uložiť", +load: "načítať", +line_abbr: "Ln", +char_abbr: "Ch", +position: "Pozícia", +total: "Spolu", +close_popup: "zavrieť okno", +shortcuts: "Skratky", +add_tab: "pridať tabulovanie textu", +remove_tab: "odstrániť tabulovanie textu", +about_notice: "Upozornenie: funkcia zvýrazňovania syntaxe je dostupná iba pre malý text", +toggle: "Prepnúť editor", +accesskey: "Accesskey", +tab: "Záložka", +shift: "Shift", +ctrl: "Ctrl", +esc: "Esc", +processing: "Spracúvam...", +fullscreen: "cel=a obrazovka", +syntax_selection: "--Vyber Syntax--", +close_tab: "Close file" +}; ADDED applications/admin/static/edit_area/langs/zh.js Index: applications/admin/static/edit_area/langs/zh.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/langs/zh.js @@ -0,0 +1,48 @@ +editAreaLoader.lang["zh"]={ +new_document: "新建空白文档", +search_button: "查找与替换", +search_command: "查找下一个 / 打开查找框", +search: "查找", +replace: "替换", +replace_command: "替换 / 打开查找框", +find_next: "查找下一个", +replace_all: "全部替换", +reg_exp: "正则表达式", +match_case: "匹配大小写", +not_found: "未找到.", +occurrence_replaced: "处被替换.", +search_field_empty: "查找框没有内容", +restart_search_at_begin: "已到到文档末尾. 从头重新查找.", +move_popup: "移动查找对话框", +font_size: "--字体大小--", +go_to_line: "转到行", +go_to_line_prompt: "转到行:", +undo: "恢复", +redo: "重做", +change_smooth_selection: "启用/禁止一些显示特性(更好看但更耗费资源)", +highlight: "启用/禁止语法高亮", +reset_highlight: "重置语法高亮(当文本显示不同步时)", +word_wrap: "toggle word wrapping mode", +help: "关于", +save: "保存", +load: "加载", +line_abbr: "行", +char_abbr: "字符", +position: "位置", +total: "总计", +close_popup: "关闭对话框", +shortcuts: "快捷键", +add_tab: "添加制表符(Tab)", +remove_tab: "移除制表符(Tab)", +about_notice: "注意：语法高亮功能仅用于较少内容的文本(文件内容太大会导致浏览器反应慢)", +toggle: "切换编辑器", +accesskey: "快捷键", +tab: "Tab", +shift: "Shift", +ctrl: "Ctrl", +esc: "Esc", +processing: "正在处理中...", +fullscreen: "全屏编辑", +syntax_selection: "--语法--", +close_tab: "关闭文件" +}; ADDED applications/admin/static/edit_area/license.txt Index: applications/admin/static/edit_area/license.txt ================================================================== --- /dev/null +++ applications/admin/static/edit_area/license.txt ADDED applications/admin/static/edit_area/license_apache.txt Index: applications/admin/static/edit_area/license_apache.txt ================================================================== --- /dev/null +++ applications/admin/static/edit_area/license_apache.txt @@ -0,0 +1,7 @@ +Copyright 2008 Christophe Dolivet + +Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + +Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. ADDED applications/admin/static/edit_area/license_bsd.txt Index: applications/admin/static/edit_area/license_bsd.txt ================================================================== --- /dev/null +++ applications/admin/static/edit_area/license_bsd.txt @@ -0,0 +1,10 @@ +Copyright (c) 2008, Christophe Dolivet +All rights reserved. + +Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. + * Neither the name of EditArea nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ADDED applications/admin/static/edit_area/license_lgpl.txt Index: applications/admin/static/edit_area/license_lgpl.txt ================================================================== --- /dev/null +++ applications/admin/static/edit_area/license_lgpl.txt @@ -0,0 +1,458 @@ + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it becomes +a de-facto standard. To achieve this, non-free programs must be +allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control compilation +and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at + least three years, to give the same user the materials + specified in Subsection 6a, above, for a charge no more + than the cost of performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under any +particular circumstance, the balance of the section is intended to apply, +and the section as a whole is intended to apply in other circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License may add +an explicit geographical distribution limitation excluding those countries, +so that distribution is permitted only in or among countries not thus +excluded. In such case, this License incorporates the limitation as if +written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + + END OF TERMS AND CONDITIONS ADDED applications/admin/static/edit_area/manage_area.js Index: applications/admin/static/edit_area/manage_area.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/manage_area.js @@ -0,0 +1,623 @@ + EditArea.prototype.focus = function() { + this.textarea.focus(); + this.textareaFocused=true; + }; + + + EditArea.prototype.check_line_selection= function(timer_checkup){ + var changes, infos, new_top, new_width,i; + + var t1=t2=t2_1=t3=tLines=tend= new Date().getTime(); + // l'editeur n'existe plus => on quitte + if(!editAreas[this.id]) + return false; + + if(!this.smooth_selection && !this.do_highlight) + { + //do nothing + } + else if(this.textareaFocused && editAreas[this.id]["displayed"]==true && this.isResizing==false) + { + infos = this.get_selection_infos(); + changes = this.checkTextEvolution( typeof( this.last_selection['full_text'] ) == 'undefined' ? '' : this.last_selection['full_text'], infos['full_text'] ); + + t2= new Date().getTime(); + + // if selection change + if(this.last_selection["line_start"] != infos["line_start"] || this.last_selection["line_nb"] != infos["line_nb"] || infos["full_text"] != this.last_selection["full_text"] || this.reload_highlight || this.last_selection["selectionStart"] != infos["selectionStart"] || this.last_selection["selectionEnd"] != infos["selectionEnd"] || !timer_checkup ) + { + // move and adjust text selection elements + new_top = this.getLinePosTop( infos["line_start"] ); + new_width = Math.max(this.textarea.scrollWidth, this.container.clientWidth -50); + this.selection_field.style.top=this.selection_field_text.style.top=new_top+"px"; + if(!this.settings['word_wrap']){ + this.selection_field.style.width=this.selection_field_text.style.width=this.test_font_size.style.width=new_width+"px"; + } + + // usefull? => _$("cursor_pos").style.top=new_top+"px"; + + if(this.do_highlight==true) + { + // fill selection elements + var curr_text = infos["full_text"].split("\n"); + var content = ""; + //alert("length: "+curr_text.length+ " i: "+ Math.max(0,infos["line_start"]-1)+ " end: "+Math.min(curr_text.length, infos["line_start"]+infos["line_nb"]-1)+ " line: "+infos["line_start"]+" [0]: "+curr_text[0]+" [1]: "+curr_text[1]); + var start = Math.max(0,infos["line_start"]-1); + var end = Math.min(curr_text.length, infos["line_start"]+infos["line_nb"]-1); + + //curr_text[start]= curr_text[start].substr(0,infos["curr_pos"]-1) +"¤_overline_¤"+ curr_text[start].substr(infos["curr_pos"]-1); + for(i=start; i< end; i++){ + content+= curr_text[i]+"\n"; + } + + // add special chars arround selected characters + selLength = infos['selectionEnd'] - infos['selectionStart']; + content = content.substr( 0, infos["curr_pos"] - 1 ) + "\r\r" + content.substr( infos["curr_pos"] - 1, selLength ) + "\r\r" + content.substr( infos["curr_pos"] - 1 + selLength ); + content = ''+ content.replace(/&/g,"&").replace(//g,">").replace("\r\r", '').replace("\r\r", '') +''; + + if( this.isIE || ( this.isOpera && this.isOpera < 9.6 ) ) { + this.selection_field.innerHTML= "
" + content.replace(/^\r?\n/, "
") + "
"; + } else { + this.selection_field.innerHTML= content; + } + this.selection_field_text.innerHTML = this.selection_field.innerHTML; + t2_1 = new Date().getTime(); + // check if we need to update the highlighted background + if(this.reload_highlight || (infos["full_text"] != this.last_text_to_highlight && (this.last_selection["line_start"]!=infos["line_start"] || this.show_line_colors || this.settings['word_wrap'] || this.last_selection["line_nb"]!=infos["line_nb"] || this.last_selection["nb_line"]!=infos["nb_line"]) ) ) + { + this.maj_highlight(infos); + } + } + } + t3= new Date().getTime(); + + // manage line heights + if( this.settings['word_wrap'] && infos["full_text"] != this.last_selection["full_text"]) + { + // refresh only 1 line if text change concern only one line and that the total line number has not changed + if( changes.newText.split("\n").length == 1 && this.last_selection['nb_line'] && infos['nb_line'] == this.last_selection['nb_line'] ) + { + this.fixLinesHeight( infos['full_text'], changes.lineStart, changes.lineStart ); + } + else + { + this.fixLinesHeight( infos['full_text'], changes.lineStart, -1 ); + } + } + + tLines= new Date().getTime(); + // manage bracket finding + if( infos["line_start"] != this.last_selection["line_start"] || infos["curr_pos"] != this.last_selection["curr_pos"] || infos["full_text"].length!=this.last_selection["full_text"].length || this.reload_highlight || !timer_checkup ) + { + // move _cursor_pos + var selec_char= infos["curr_line"].charAt(infos["curr_pos"]-1); + var no_real_move=true; + if(infos["line_nb"]==1 && (this.assocBracket[selec_char] || this.revertAssocBracket[selec_char]) ){ + + no_real_move=false; + //findEndBracket(infos["line_start"], infos["curr_pos"], selec_char); + if(this.findEndBracket(infos, selec_char) === true){ + _$("end_bracket").style.visibility ="visible"; + _$("cursor_pos").style.visibility ="visible"; + _$("cursor_pos").innerHTML = selec_char; + _$("end_bracket").innerHTML = (this.assocBracket[selec_char] || this.revertAssocBracket[selec_char]); + }else{ + _$("end_bracket").style.visibility ="hidden"; + _$("cursor_pos").style.visibility ="hidden"; + } + }else{ + _$("cursor_pos").style.visibility ="hidden"; + _$("end_bracket").style.visibility ="hidden"; + } + //alert("move cursor"); + this.displayToCursorPosition("cursor_pos", infos["line_start"], infos["curr_pos"]-1, infos["curr_line"], no_real_move); + if(infos["line_nb"]==1 && infos["line_start"]!=this.last_selection["line_start"]) + this.scroll_to_view(); + } + this.last_selection=infos; + } + + tend= new Date().getTime(); + //if( (tend-t1) > 7 ) + // console.log( "tps total: "+ (tend-t1) + " tps get_infos: "+ (t2-t1)+ " tps selec: "+ (t2_1-t2)+ " tps highlight: "+ (t3-t2_1) +" tps lines: "+ (tLines-t3) +" tps cursor+lines: "+ (tend-tLines)+" \n" ); + + + if(timer_checkup){ + setTimeout("editArea.check_line_selection(true)", this.check_line_selection_timer); + } + }; + + + EditArea.prototype.get_selection_infos= function(){ + var sel={}, start, end, len, str; + + this.getIESelection(); + start = this.textarea.selectionStart; + end = this.textarea.selectionEnd; + + if( this.last_selection["selectionStart"] == start && this.last_selection["selectionEnd"] == end && this.last_selection["full_text"] == this.textarea.value ) + { + return this.last_selection; + } + + if(this.tabulation!="\t" && this.textarea.value.indexOf("\t")!=-1) + { // can append only after copy/paste + len = this.textarea.value.length; + this.textarea.value = this.replace_tab(this.textarea.value); + start = end = start+(this.textarea.value.length-len); + this.area_select( start, 0 ); + } + + sel["selectionStart"] = start; + sel["selectionEnd"] = end; + sel["full_text"] = this.textarea.value; + sel["line_start"] = 1; + sel["line_nb"] = 1; + sel["curr_pos"] = 0; + sel["curr_line"] = ""; + sel["indexOfCursor"] = 0; + sel["selec_direction"] = this.last_selection["selec_direction"]; + + //return sel; + var splitTab= sel["full_text"].split("\n"); + var nbLine = Math.max(0, splitTab.length); + var nbChar = Math.max(0, sel["full_text"].length - (nbLine - 1)); // (remove \n caracters from the count) + if( sel["full_text"].indexOf("\r") != -1 ) + nbChar = nbChar - ( nbLine - 1 ); // (remove \r caracters from the count) + sel["nb_line"] = nbLine; + sel["nb_char"] = nbChar; + + if(start>0){ + str = sel["full_text"].substr(0,start); + sel["curr_pos"] = start - str.lastIndexOf("\n"); + sel["line_start"] = Math.max(1, str.split("\n").length); + }else{ + sel["curr_pos"]=1; + } + if(end>start){ + sel["line_nb"]=sel["full_text"].substring(start,end).split("\n").length; + } + sel["indexOfCursor"]=start; + sel["curr_line"]=splitTab[Math.max(0,sel["line_start"]-1)]; + + // determine in which direction the selection grow + if(sel["selectionStart"] == this.last_selection["selectionStart"]){ + if(sel["selectionEnd"]>this.last_selection["selectionEnd"]) + sel["selec_direction"]= "down"; + else if(sel["selectionEnd"] == this.last_selection["selectionStart"]) + sel["selec_direction"]= this.last_selection["selec_direction"]; + }else if(sel["selectionStart"] == this.last_selection["selectionEnd"] && sel["selectionEnd"]>this.last_selection["selectionEnd"]){ + sel["selec_direction"]= "down"; + }else{ + sel["selec_direction"]= "up"; + } + + _$("nbLine").innerHTML = nbLine; + _$("nbChar").innerHTML = nbChar; + _$("linePos").innerHTML = sel["line_start"]; + _$("currPos").innerHTML = sel["curr_pos"]; + + return sel; + }; + + // set IE position in Firefox mode (textarea.selectionStart and textarea.selectionEnd) + EditArea.prototype.getIESelection= function(){ + var selectionStart, selectionEnd, range, stored_range; + + if( !this.isIE ) + return false; + + // make it work as nowrap mode (easier for range manipulation with lineHeight) + if( this.settings['word_wrap'] ) + this.textarea.wrap='off'; + + try{ + range = document.selection.createRange(); + stored_range = range.duplicate(); + stored_range.moveToElementText( this.textarea ); + stored_range.setEndPoint( 'EndToEnd', range ); + if( stored_range.parentElement() != this.textarea ) + throw "invalid focus"; + + // the range don't take care of empty lines in the end of the selection + var scrollTop = this.result.scrollTop + document.body.scrollTop; + var relative_top= range.offsetTop - parent.calculeOffsetTop(this.textarea) + scrollTop; + var line_start = Math.round((relative_top / this.lineHeight) +1); + var line_nb = Math.round( range.boundingHeight / this.lineHeight ); + + selectionStart = stored_range.text.length - range.text.length; + selectionStart += ( line_start - this.textarea.value.substr(0, selectionStart).split("\n").length)*2; // count missing empty \r to the selection + selectionStart -= ( line_start - this.textarea.value.substr(0, selectionStart).split("\n").length ) * 2; + + selectionEnd = selectionStart + range.text.length; + selectionEnd += (line_start + line_nb - 1 - this.textarea.value.substr(0, selectionEnd ).split("\n").length)*2; + + this.textarea.selectionStart = selectionStart; + this.textarea.selectionEnd = selectionEnd; + } + catch(e){} + + // restore wrap mode + if( this.settings['word_wrap'] ) + this.textarea.wrap='soft'; + }; + + // select the text for IE (and take care of \r caracters) + EditArea.prototype.setIESelection= function(){ + var a = this.textarea, nbLineStart, nbLineEnd, range; + + if( !this.isIE ) + return false; + + nbLineStart = a.value.substr(0, a.selectionStart).split("\n").length - 1; + nbLineEnd = a.value.substr(0, a.selectionEnd).split("\n").length - 1; + range = document.selection.createRange(); + range.moveToElementText( a ); + range.setEndPoint( 'EndToStart', range ); + + range.moveStart('character', a.selectionStart - nbLineStart); + range.moveEnd('character', a.selectionEnd - nbLineEnd - (a.selectionStart - nbLineStart) ); + range.select(); + }; + + + + EditArea.prototype.checkTextEvolution=function(lastText,newText){ + // ch will contain changes datas + var ch={},baseStep=200, cpt=0, end, step,tStart=new Date().getTime(); + + end = Math.min(newText.length, lastText.length); + step = baseStep; + // find how many chars are similar at the begin of the text + while( cpt=1 ){ + if(lastText.substr(cpt, step) == newText.substr(cpt, step)){ + cpt+= step; + }else{ + step= Math.floor(step/2); + } + } + + ch.posStart = cpt; + ch.lineStart= newText.substr(0, ch.posStart).split("\n").length -1; + + cpt_last = lastText.length; + cpt = newText.length; + step = baseStep; + // find how many chars are similar at the end of the text + while( cpt>=0 && cpt_last>=0 && step>=1 ){ + if(lastText.substr(cpt_last-step, step) == newText.substr(cpt-step, step)){ + cpt-= step; + cpt_last-= step; + }else{ + step= Math.floor(step/2); + } + } + + ch.posNewEnd = cpt; + ch.posLastEnd = cpt_last; + if(ch.posNewEnd<=ch.posStart){ + if(lastText.length < newText.length){ + ch.posNewEnd= ch.posStart + newText.length - lastText.length; + ch.posLastEnd= ch.posStart; + }else{ + ch.posLastEnd= ch.posStart + lastText.length - newText.length; + ch.posNewEnd= ch.posStart; + } + } + ch.newText = newText.substring(ch.posStart, ch.posNewEnd); + ch.lastText = lastText.substring(ch.posStart, ch.posLastEnd); + + ch.lineNewEnd = newText.substr(0, ch.posNewEnd).split("\n").length -1; + ch.lineLastEnd = lastText.substr(0, ch.posLastEnd).split("\n").length -1; + + ch.newTextLine = newText.split("\n").slice(ch.lineStart, ch.lineNewEnd+1).join("\n"); + ch.lastTextLine = lastText.split("\n").slice(ch.lineStart, ch.lineLastEnd+1).join("\n"); + //console.log( ch ); + return ch; + }; + + EditArea.prototype.tab_selection= function(){ + if(this.is_tabbing) + return; + this.is_tabbing=true; + //infos=getSelectionInfos(); + //if( document.selection ){ + this.getIESelection(); + /* Insertion du code de formatage */ + var start = this.textarea.selectionStart; + var end = this.textarea.selectionEnd; + var insText = this.textarea.value.substring(start, end); + + /* Insert tabulation and ajust cursor position */ + var pos_start=start; + var pos_end=end; + if (insText.length == 0) { + // if only one line selected + this.textarea.value = this.textarea.value.substr(0, start) + this.tabulation + this.textarea.value.substr(end); + pos_start = start + this.tabulation.length; + pos_end=pos_start; + } else { + start= Math.max(0, this.textarea.value.substr(0, start).lastIndexOf("\n")+1); + endText=this.textarea.value.substr(end); + startText=this.textarea.value.substr(0, start); + tmp= this.textarea.value.substring(start, end).split("\n"); + insText= this.tabulation+tmp.join("\n"+this.tabulation); + this.textarea.value = startText + insText + endText; + pos_start = start; + pos_end= this.textarea.value.indexOf("\n", startText.length + insText.length); + if(pos_end==-1) + pos_end=this.textarea.value.length; + //pos = start + repdeb.length + insText.length + ; + } + this.textarea.selectionStart = pos_start; + this.textarea.selectionEnd = pos_end; + + //if( document.selection ){ + if(this.isIE) + { + this.setIESelection(); + setTimeout("editArea.is_tabbing=false;", 100); // IE can't accept to make 2 tabulation without a little break between both + } + else + { + this.is_tabbing=false; + } + + }; + + EditArea.prototype.invert_tab_selection= function(){ + var t=this, a=this.textarea; + if(t.is_tabbing) + return; + t.is_tabbing=true; + //infos=getSelectionInfos(); + //if( document.selection ){ + t.getIESelection(); + + var start = a.selectionStart; + var end = a.selectionEnd; + var insText = a.value.substring(start, end); + + /* Tab remove and cursor seleciton adjust */ + var pos_start=start; + var pos_end=end; + if (insText.length == 0) { + if(a.value.substring(start-t.tabulation.length, start)==t.tabulation) + { + a.value = a.value.substr(0, start-t.tabulation.length) + a.value.substr(end); + pos_start = Math.max(0, start-t.tabulation.length); + pos_end = pos_start; + } + /* + a.value = a.value.substr(0, start) + t.tabulation + insText + a.value.substr(end); + pos_start = start + t.tabulation.length; + pos_end=pos_start;*/ + } else { + start = a.value.substr(0, start).lastIndexOf("\n")+1; + endText = a.value.substr(end); + startText = a.value.substr(0, start); + tmp = a.value.substring(start, end).split("\n"); + insText = ""; + for(i=0; i=0; ){ + if(infos["full_text"].charAt(i)==endBracket){ + nbBracketOpen--; + if(nbBracketOpen<=0){ + //i=infos["full_text"].length; + end=i; + break; + } + }else if(infos["full_text"].charAt(i)==bracket) + nbBracketOpen++; + if(normal_order) + i++; + else + i--; + } + + //end=infos["full_text"].indexOf("}", start); + if(end==-1) + return false; + var endLastLine=infos["full_text"].substr(0, end).lastIndexOf("\n"); + if(endLastLine==-1) + line=1; + else + line= infos["full_text"].substr(0, endLastLine).split("\n").length + 1; + + var curPos= end - endLastLine - 1; + var endLineLength = infos["full_text"].substring(end).split("\n")[0].length; + this.displayToCursorPosition("end_bracket", line, curPos, infos["full_text"].substring(endLastLine +1, end + endLineLength)); + return true; + }; + + EditArea.prototype.displayToCursorPosition= function(id, start_line, cur_pos, lineContent, no_real_move){ + var elem,dest,content,posLeft=0,posTop,fixPadding,topOffset,endElem; + + elem = this.test_font_size; + dest = _$(id); + content = ""+lineContent.substr(0, cur_pos).replace(/&/g,"&").replace(/"+lineContent.substr(cur_pos).replace(/&/g,"&").replace(/"; + if( this.isIE || ( this.isOpera && this.isOpera < 9.6 ) ) { + elem.innerHTML= "
" + content.replace(/^\r?\n/, "
") + "
"; + } else { + elem.innerHTML= content; + } + + + endElem = _$('endTestFont'); + topOffset = endElem.offsetTop; + fixPadding = parseInt( this.content_highlight.style.paddingLeft.replace("px", "") ); + posLeft = 45 + endElem.offsetLeft + ( !isNaN( fixPadding ) && topOffset > 0 ? fixPadding : 0 ); + posTop = this.getLinePosTop( start_line ) + topOffset;// + Math.floor( ( endElem.offsetHeight - 1 ) / this.lineHeight ) * this.lineHeight; + + // detect the case where the span start on a line but has no display on it + if( this.isIE && cur_pos > 0 && endElem.offsetLeft == 0 ) + { + posTop += this.lineHeight; + } + if(no_real_move!=true){ // when the cursor is hidden no need to move him + dest.style.top=posTop+"px"; + dest.style.left=posLeft+"px"; + } + // usefull for smarter scroll + dest.cursor_top=posTop; + dest.cursor_left=posLeft; + // _$(id).style.marginLeft=posLeft+"px"; + }; + + EditArea.prototype.getLinePosTop= function(start_line){ + var elem= _$('line_'+ start_line), posTop=0; + if( elem ) + posTop = elem.offsetTop; + else + posTop = this.lineHeight * (start_line-1); + return posTop; + }; + + + // return the dislpayed height of a text (take word-wrap into account) + EditArea.prototype.getTextHeight= function(text){ + var t=this,elem,height; + elem = t.test_font_size; + content = text.replace(/&/g,"&").replace(/") + ""; + } else { + elem.innerHTML= content; + } + height = elem.offsetHeight; + height = Math.max( 1, Math.floor( elem.offsetHeight / this.lineHeight ) ) * this.lineHeight; + return height; + }; + + /** + * Fix line height for the given lines + * @param Integer linestart + * @param Integer lineEnd End line or -1 to cover all lines + */ + EditArea.prototype.fixLinesHeight= function( textValue, lineStart,lineEnd ){ + var aText = textValue.split("\n"); + if( lineEnd == -1 ) + lineEnd = aText.length-1; + for( var i = Math.max(0, lineStart); i <= lineEnd; i++ ) + { + if( elem = _$('line_'+ ( i+1 ) ) ) + { + elem.style.height= typeof( aText[i] ) != "undefined" ? this.getTextHeight( aText[i] )+"px" : this.lineHeight; + } + } + }; + + EditArea.prototype.area_select= function(start, length){ + this.textarea.focus(); + + start = Math.max(0, Math.min(this.textarea.value.length, start)); + end = Math.max(start, Math.min(this.textarea.value.length, start+length)); + + if(this.isIE) + { + this.textarea.selectionStart = start; + this.textarea.selectionEnd = end; + this.setIESelection(); + } + else + { + // Opera bug when moving selection start and selection end + if(this.isOpera && this.isOpera < 9.6 ) + { + this.textarea.setSelectionRange(0, 0); + } + this.textarea.setSelectionRange(start, end); + } + this.check_line_selection(); + }; + + + EditArea.prototype.area_get_selection= function(){ + var text=""; + if( document.selection ){ + var range = document.selection.createRange(); + text=range.text; + }else{ + text= this.textarea.value.substring(this.textarea.selectionStart, this.textarea.selectionEnd); + } + return text; + }; ADDED applications/admin/static/edit_area/plugins/charmap/charmap.js Index: applications/admin/static/edit_area/plugins/charmap/charmap.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/charmap.js @@ -0,0 +1,90 @@ +/** + * Charmap plugin + * by Christophe Dolivet + * v0.1 (2006/09/22) + * + * + * This plugin allow to use a visual keyboard allowing to insert any UTF-8 characters in the text. + * + * - plugin name to add to the plugin list: "charmap" + * - plugin name to add to the toolbar list: "charmap" + * - possible parameters to add to EditAreaLoader.init(): + * "charmap_default": (String) define the name of the default character range displayed on popup display + * (default: "arrows") + * + * + */ + +var EditArea_charmap= { + /** + * Get called once this file is loaded (editArea still not initialized) + * + * @return nothing + */ + init: function(){ + this.default_language="Arrows"; + } + + /** + * Returns the HTML code for a specific control string or false if this plugin doesn't have that control. + * A control can be a button, select list or any other HTML item to present in the EditArea user interface. + * Language variables such as {$lang_somekey} will also be replaced with contents from + * the language packs. + * + * @param {string} ctrl_name: the name of the control to add + * @return HTML code for a specific control or false. + * @type string or boolean + */ + ,get_control_html: function(ctrl_name){ + switch(ctrl_name){ + case "charmap": + // Control id, button img, command + return parent.editAreaLoader.get_button_html('charmap_but', 'charmap.gif', 'charmap_press', false, this.baseURL); + } + return false; + } + /** + * Get called once EditArea is fully loaded and initialised + * + * @return nothing + */ + ,onload: function(){ + if(editArea.settings["charmap_default"] && editArea.settings["charmap_default"].length>0) + this.default_language= editArea.settings["charmap_default"]; + } + + /** + * Is called each time the user touch a keyboard key. + * + * @param (event) e: the keydown event + * @return true - pass to next handler in chain, false - stop chain execution + * @type boolean + */ + ,onkeydown: function(e){ + + } + + /** + * Executes a specific command, this function handles plugin commands. + * + * @param {string} cmd: the name of the command being executed + * @param {unknown} param: the parameter of the command + * @return true - pass to next handler in chain, false - stop chain execution + * @type boolean + */ + ,execCommand: function(cmd, param){ + // Handle commands + switch(cmd){ + case "charmap_press": + win= window.open(this.baseURL+"popup.html", "charmap", "width=500,height=270,scrollbars=yes,resizable=yes"); + win.focus(); + return false; + } + // Pass to next handler in chain + return true; + } + +}; + +// Adds the plugin class to the list of available EditArea plugins +editArea.add_plugin("charmap", EditArea_charmap); ADDED applications/admin/static/edit_area/plugins/charmap/css/charmap.css Index: applications/admin/static/edit_area/plugins/charmap/css/charmap.css ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/css/charmap.css @@ -0,0 +1,64 @@ +body{ + background-color: #F0F0EE; + font: 12px monospace, sans-serif; +} + +select{ + background-color: #F9F9F9; + border: solid 1px #888888; +} + +h1, h2, h3, h4, h5, h6{ + margin: 0; + padding: 0; + color: #2B6FB6; +} + +h1{ + font-size: 1.5em; +} + +div#char_list{ + height: 200px; + overflow: auto; + padding: 1px; + border: 1px solid #0A246A; + background-color: #F9F9F9; + clear: both; + margin-top: 5px; +} + +a.char{ + display: block; + float: left; + width: 20px; + height: 20px; + line-height: 20px; + margin: 1px; + border: solid 1px #888888; + text-align: center; + cursor: pointer; +} + +a.char:hover{ + background-color: #CCCCCC; +} + +.preview{ + border: solid 1px #888888; + width: 50px; + padding: 2px 5px; + height: 35px; + line-height: 35px; + text-align:center; + background-color: #CCCCCC; + font-size: 2em; + float: right; + font-weight: bold; + margin: 0 0 5px 5px; +} + +#preview_code{ + font-size: 1.1em; + width: 70px; +} ADDED applications/admin/static/edit_area/plugins/charmap/images/charmap.gif Index: applications/admin/static/edit_area/plugins/charmap/images/charmap.gif ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/images/charmap.gif cannot compute difference between binary files ADDED applications/admin/static/edit_area/plugins/charmap/jscripts/map.js Index: applications/admin/static/edit_area/plugins/charmap/jscripts/map.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/jscripts/map.js @@ -0,0 +1,373 @@ +var editArea; + + +/** + * UTF-8 list taken from http://www.utf8-chartable.de/unicode-utf8-table.pl?utf8=dec + */ + + +/* +var char_range_list={ +"Basic Latin":"0021,007F", +"Latin-1 Supplement":"0080,00FF", +"Latin Extended-A":"0100,017F", +"Latin Extended-B":"0180,024F", +"IPA Extensions":"0250,02AF", +"Spacing Modifier Letters":"02B0,02FF", + +"Combining Diacritical Marks":"0300,036F", +"Greek and Coptic":"0370,03FF", +"Cyrillic":"0400,04FF", +"Cyrillic Supplement":"0500,052F", +"Armenian":"0530,058F", +"Hebrew":"0590,05FF", +"Arabic":"0600,06FF", +"Syriac":"0700,074F", +"Arabic Supplement":"0750,077F", + +"Thaana":"0780,07BF", +"Devanagari":"0900,097F", +"Bengali":"0980,09FF", +"Gurmukhi":"0A00,0A7F", +"Gujarati":"0A80,0AFF", +"Oriya":"0B00,0B7F", +"Tamil":"0B80,0BFF", +"Telugu":"0C00,0C7F", +"Kannada":"0C80,0CFF", + +"Malayalam":"0D00,0D7F", +"Sinhala":"0D80,0DFF", +"Thai":"0E00,0E7F", +"Lao":"0E80,0EFF", +"Tibetan":"0F00,0FFF", +"Myanmar":"1000,109F", +"Georgian":"10A0,10FF", +"Hangul Jamo":"1100,11FF", +"Ethiopic":"1200,137F", + +"Ethiopic Supplement":"1380,139F", +"Cherokee":"13A0,13FF", +"Unified Canadian Aboriginal Syllabics":"1400,167F", +"Ogham":"1680,169F", +"Runic":"16A0,16FF", +"Tagalog":"1700,171F", +"Hanunoo":"1720,173F", +"Buhid":"1740,175F", +"Tagbanwa":"1760,177F", + +"Khmer":"1780,17FF", +"Mongolian":"1800,18AF", +"Limbu":"1900,194F", +"Tai Le":"1950,197F", +"New Tai Lue":"1980,19DF", +"Khmer Symbols":"19E0,19FF", +"Buginese":"1A00,1A1F", +"Phonetic Extensions":"1D00,1D7F", +"Phonetic Extensions Supplement":"1D80,1DBF", + +"Combining Diacritical Marks Supplement":"1DC0,1DFF", +"Latin Extended Additional":"1E00,1EFF", +"Greek Extended":"1F00,1FFF", +"General Punctuation":"2000,206F", +"Superscripts and Subscripts":"2070,209F", +"Currency Symbols":"20A0,20CF", +"Combining Diacritical Marks for Symbols":"20D0,20FF", +"Letterlike Symbols":"2100,214F", +"Number Forms":"2150,218F", + +"Arrows":"2190,21FF", +"Mathematical Operators":"2200,22FF", +"Miscellaneous Technical":"2300,23FF", +"Control Pictures":"2400,243F", +"Optical Character Recognition":"2440,245F", +"Enclosed Alphanumerics":"2460,24FF", +"Box Drawing":"2500,257F", +"Block Elements":"2580,259F", +"Geometric Shapes":"25A0,25FF", + +"Miscellaneous Symbols":"2600,26FF", +"Dingbats":"2700,27BF", +"Miscellaneous Mathematical Symbols-A":"27C0,27EF", +"Supplemental Arrows-A":"27F0,27FF", +"Braille Patterns":"2800,28FF", +"Supplemental Arrows-B":"2900,297F", +"Miscellaneous Mathematical Symbols-B":"2980,29FF", +"Supplemental Mathematical Operators":"2A00,2AFF", +"Miscellaneous Symbols and Arrows":"2B00,2BFF", + +"Glagolitic":"2C00,2C5F", +"Coptic":"2C80,2CFF", +"Georgian Supplement":"2D00,2D2F", +"Tifinagh":"2D30,2D7F", +"Ethiopic Extended":"2D80,2DDF", +"Supplemental Punctuation":"2E00,2E7F", +"CJK Radicals Supplement":"2E80,2EFF", +"Kangxi Radicals":"2F00,2FDF", +"Ideographic Description Characters":"2FF0,2FFF", + +"CJK Symbols and Punctuation":"3000,303F", +"Hiragana":"3040,309F", +"Katakana":"30A0,30FF", +"Bopomofo":"3100,312F", +"Hangul Compatibility Jamo":"3130,318F", +"Kanbun":"3190,319F", +"Bopomofo Extended":"31A0,31BF", +"CJK Strokes":"31C0,31EF", +"Katakana Phonetic Extensions":"31F0,31FF", + +"Enclosed CJK Letters and Months":"3200,32FF", +"CJK Compatibility":"3300,33FF", +"CJK Unified Ideographs Extension A":"3400,4DBF", +"Yijing Hexagram Symbols":"4DC0,4DFF", +"CJK Unified Ideographs":"4E00,9FFF", +"Yi Syllables":"A000,A48F", +"Yi Radicals":"A490,A4CF", +"Modifier Tone Letters":"A700,A71F", +"Syloti Nagri":"A800,A82F", + +"Hangul Syllables":"AC00,D7AF", +"High Surrogates":"D800,DB7F", +"High Private Use Surrogates":"DB80,DBFF", +"Low Surrogates":"DC00,DFFF", +"Private Use Area":"E000,F8FF", +"CJK Compatibility Ideographs":"F900,FAFF", +"Alphabetic Presentation Forms":"FB00,FB4F", +"Arabic Presentation Forms-A":"FB50,FDFF", +"Variation Selectors":"FE00,FE0F", + +"Vertical Forms":"FE10,FE1F", +"Combining Half Marks":"FE20,FE2F", +"CJK Compatibility Forms":"FE30,FE4F", +"Small Form Variants":"FE50,FE6F", +"Arabic Presentation Forms-B":"FE70,FEFF", +"Halfwidth and Fullwidth Forms":"FF00,FFEF", +"Specials":"FFF0,FFFF", +"Linear B Syllabary":"10000,1007F", +"Linear B Ideograms":"10080,100FF", + +"Aegean Numbers":"10100,1013F", +"Ancient Greek Numbers":"10140,1018F", +"Old Italic":"10300,1032F", +"Gothic":"10330,1034F", +"Ugaritic":"10380,1039F", +"Old Persian":"103A0,103DF", +"Deseret":"10400,1044F", +"Shavian":"10450,1047F", +"Osmanya":"10480,104AF", + +"Cypriot Syllabary":"10800,1083F", +"Kharoshthi":"10A00,10A5F", +"Byzantine Musical Symbols":"1D000,1D0FF", +"Musical Symbols":"1D100,1D1FF", +"Ancient Greek Musical Notation":"1D200,1D24F", +"Tai Xuan Jing Symbols":"1D300,1D35F", +"Mathematical Alphanumeric Symbols":"1D400,1D7FF", +"CJK Unified Ideographs Extension B":"20000,2A6DF", +"CJK Compatibility Ideographs Supplement":"2F800,2FA1F", +"Tags":"E0000,E007F", +"Variation Selectors Supplement":"E0100,E01EF" +}; +*/ +var char_range_list={ +"Aegean Numbers":"10100,1013F", +"Alphabetic Presentation Forms":"FB00,FB4F", +"Ancient Greek Musical Notation":"1D200,1D24F", +"Ancient Greek Numbers":"10140,1018F", +"Arabic":"0600,06FF", +"Arabic Presentation Forms-A":"FB50,FDFF", +"Arabic Presentation Forms-B":"FE70,FEFF", +"Arabic Supplement":"0750,077F", +"Armenian":"0530,058F", +"Arrows":"2190,21FF", +"Basic Latin":"0020,007F", +"Bengali":"0980,09FF", +"Block Elements":"2580,259F", +"Bopomofo Extended":"31A0,31BF", +"Bopomofo":"3100,312F", +"Box Drawing":"2500,257F", +"Braille Patterns":"2800,28FF", +"Buginese":"1A00,1A1F", +"Buhid":"1740,175F", +"Byzantine Musical Symbols":"1D000,1D0FF", +"CJK Compatibility Forms":"FE30,FE4F", +"CJK Compatibility Ideographs Supplement":"2F800,2FA1F", +"CJK Compatibility Ideographs":"F900,FAFF", +"CJK Compatibility":"3300,33FF", +"CJK Radicals Supplement":"2E80,2EFF", +"CJK Strokes":"31C0,31EF", +"CJK Symbols and Punctuation":"3000,303F", +"CJK Unified Ideographs Extension A":"3400,4DBF", +"CJK Unified Ideographs Extension B":"20000,2A6DF", +"CJK Unified Ideographs":"4E00,9FFF", +"Cherokee":"13A0,13FF", +"Combining Diacritical Marks Supplement":"1DC0,1DFF", +"Combining Diacritical Marks for Symbols":"20D0,20FF", +"Combining Diacritical Marks":"0300,036F", +"Combining Half Marks":"FE20,FE2F", +"Control Pictures":"2400,243F", +"Coptic":"2C80,2CFF", +"Currency Symbols":"20A0,20CF", +"Cypriot Syllabary":"10800,1083F", +"Cyrillic Supplement":"0500,052F", +"Cyrillic":"0400,04FF", +"Deseret":"10400,1044F", +"Devanagari":"0900,097F", +"Dingbats":"2700,27BF", +"Enclosed Alphanumerics":"2460,24FF", +"Enclosed CJK Letters and Months":"3200,32FF", +"Ethiopic Extended":"2D80,2DDF", +"Ethiopic Supplement":"1380,139F", +"Ethiopic":"1200,137F", +"General Punctuation":"2000,206F", +"Geometric Shapes":"25A0,25FF", +"Georgian Supplement":"2D00,2D2F", +"Georgian":"10A0,10FF", +"Glagolitic":"2C00,2C5F", +"Gothic":"10330,1034F", +"Greek Extended":"1F00,1FFF", +"Greek and Coptic":"0370,03FF", +"Gujarati":"0A80,0AFF", +"Gurmukhi":"0A00,0A7F", +"Halfwidth and Fullwidth Forms":"FF00,FFEF", +"Hangul Compatibility Jamo":"3130,318F", +"Hangul Jamo":"1100,11FF", +"Hangul Syllables":"AC00,D7AF", +"Hanunoo":"1720,173F", +"Hebrew":"0590,05FF", +"High Private Use Surrogates":"DB80,DBFF", +"High Surrogates":"D800,DB7F", +"Hiragana":"3040,309F", +"IPA Extensions":"0250,02AF", +"Ideographic Description Characters":"2FF0,2FFF", +"Kanbun":"3190,319F", +"Kangxi Radicals":"2F00,2FDF", +"Kannada":"0C80,0CFF", +"Katakana Phonetic Extensions":"31F0,31FF", +"Katakana":"30A0,30FF", +"Kharoshthi":"10A00,10A5F", +"Khmer Symbols":"19E0,19FF", +"Khmer":"1780,17FF", +"Lao":"0E80,0EFF", +"Latin Extended Additional":"1E00,1EFF", +"Latin Extended-A":"0100,017F", +"Latin Extended-B":"0180,024F", +"Latin-1 Supplement":"0080,00FF", +"Letterlike Symbols":"2100,214F", +"Limbu":"1900,194F", +"Linear B Ideograms":"10080,100FF", +"Linear B Syllabary":"10000,1007F", +"Low Surrogates":"DC00,DFFF", +"Malayalam":"0D00,0D7F", +"Mathematical Alphanumeric Symbols":"1D400,1D7FF", +"Mathematical Operators":"2200,22FF", +"Miscellaneous Mathematical Symbols-A":"27C0,27EF", +"Miscellaneous Mathematical Symbols-B":"2980,29FF", +"Miscellaneous Symbols and Arrows":"2B00,2BFF", +"Miscellaneous Symbols":"2600,26FF", +"Miscellaneous Technical":"2300,23FF", +"Modifier Tone Letters":"A700,A71F", +"Mongolian":"1800,18AF", +"Musical Symbols":"1D100,1D1FF", +"Myanmar":"1000,109F", +"New Tai Lue":"1980,19DF", +"Number Forms":"2150,218F", +"Ogham":"1680,169F", +"Old Italic":"10300,1032F", +"Old Persian":"103A0,103DF", +"Optical Character Recognition":"2440,245F", +"Oriya":"0B00,0B7F", +"Osmanya":"10480,104AF", +"Phonetic Extensions Supplement":"1D80,1DBF", +"Phonetic Extensions":"1D00,1D7F", +"Private Use Area":"E000,F8FF", +"Runic":"16A0,16FF", +"Shavian":"10450,1047F", +"Sinhala":"0D80,0DFF", +"Small Form Variants":"FE50,FE6F", +"Spacing Modifier Letters":"02B0,02FF", +"Specials":"FFF0,FFFF", +"Superscripts and Subscripts":"2070,209F", +"Supplemental Arrows-A":"27F0,27FF", +"Supplemental Arrows-B":"2900,297F", +"Supplemental Mathematical Operators":"2A00,2AFF", +"Supplemental Punctuation":"2E00,2E7F", +"Syloti Nagri":"A800,A82F", +"Syriac":"0700,074F", +"Tagalog":"1700,171F", +"Tagbanwa":"1760,177F", +"Tags":"E0000,E007F", +"Tai Le":"1950,197F", +"Tai Xuan Jing Symbols":"1D300,1D35F", +"Tamil":"0B80,0BFF", +"Telugu":"0C00,0C7F", +"Thaana":"0780,07BF", +"Thai":"0E00,0E7F", +"Tibetan":"0F00,0FFF", +"Tifinagh":"2D30,2D7F", +"Ugaritic":"10380,1039F", +"Unified Canadian Aboriginal Syllabics":"1400,167F", +"Variation Selectors Supplement":"E0100,E01EF", +"Variation Selectors":"FE00,FE0F", +"Vertical Forms":"FE10,FE1F", +"Yi Radicals":"A490,A4CF", +"Yi Syllables":"A000,A48F", +"Yijing Hexagram Symbols":"4DC0,4DFF" +}; + +var insert="charmap_insert"; + +function map_load(){ + editArea=opener.editArea; + // translate the document + insert= editArea.get_translation(insert, "word"); + //alert(document.title); + document.title= editArea.get_translation(document.title, "template"); + document.body.innerHTML= editArea.get_translation(document.body.innerHTML, "template"); + //document.title= editArea.get_translation(document.getElementBytitle, "template"); + + var selected_lang=opener.EditArea_charmap.default_language.toLowerCase(); + var selected=0; + + var select= document.getElementById("select_range") + for(var i in char_range_list){ + if(i.toLowerCase()==selected_lang) + selected=select.options.length; + select.options[select.options.length]=new Option(i, char_range_list[i]); + } + select.options[selected].selected=true; +/* start=0; + end=127; + content=""; + for(var i=start; i"+ String.fromCharCode(i) +""; + } + document.getElementById("char_list").innerHTML= html; + document.getElementById("preview_char").innerHTML=""; +} + +function previewChar(i){ + document.getElementById("preview_char").innerHTML= String.fromCharCode(i); + document.getElementById("preview_code").innerHTML= "&#"+ i +";"; +} + +function insertChar(i){ + opener.parent.editAreaLoader.setSelectedText(editArea.id, String.fromCharCode( i)); + range= opener.parent.editAreaLoader.getSelectionRange(editArea.id); + opener.parent.editAreaLoader.setSelectionRange(editArea.id, range["end"], range["end"]); + window.focus(); +} ADDED applications/admin/static/edit_area/plugins/charmap/langs/bg.js Index: applications/admin/static/edit_area/plugins/charmap/langs/bg.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/langs/bg.js @@ -0,0 +1,12 @@ +/* + * Bulgarian translation + * Author: Valentin Hristov + * Company: SOFTKIT Bulgarian + * Site: http://www.softkit-bg.com + */ +editArea.add_lang("bg",{ +charmap_but: "Виртуална клавиатура", +charmap_title: "Виртуална клавиатура", +charmap_choose_block: "избери езиков блок", +charmap_insert:"постави този символ" +}); ADDED applications/admin/static/edit_area/plugins/charmap/langs/cs.js Index: applications/admin/static/edit_area/plugins/charmap/langs/cs.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/langs/cs.js @@ -0,0 +1,6 @@ +editArea.add_lang("cs",{ +charmap_but: "Visual keyboard", +charmap_title: "Visual keyboard", +charmap_choose_block: "select language block", +charmap_insert:"insert this character" +}); ADDED applications/admin/static/edit_area/plugins/charmap/langs/de.js Index: applications/admin/static/edit_area/plugins/charmap/langs/de.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/langs/de.js @@ -0,0 +1,6 @@ +editArea.add_lang("de",{ +charmap_but: "Sonderzeichen", +charmap_title: "Sonderzeichen", +charmap_choose_block: "Bereich auswählen", +charmap_insert: "dieses Zeichen einfügen" +}); ADDED applications/admin/static/edit_area/plugins/charmap/langs/dk.js Index: applications/admin/static/edit_area/plugins/charmap/langs/dk.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/langs/dk.js @@ -0,0 +1,6 @@ +editArea.add_lang("dk",{ +charmap_but: "Visual keyboard", +charmap_title: "Visual keyboard", +charmap_choose_block: "select language block", +charmap_insert:"insert this character" +}); ADDED applications/admin/static/edit_area/plugins/charmap/langs/en.js Index: applications/admin/static/edit_area/plugins/charmap/langs/en.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/langs/en.js @@ -0,0 +1,6 @@ +editArea.add_lang("en",{ +charmap_but: "Visual keyboard", +charmap_title: "Visual keyboard", +charmap_choose_block: "select language block", +charmap_insert:"insert this character" +}); ADDED applications/admin/static/edit_area/plugins/charmap/langs/eo.js Index: applications/admin/static/edit_area/plugins/charmap/langs/eo.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/langs/eo.js @@ -0,0 +1,6 @@ +editArea.add_lang("eo",{ +charmap_but: "Ekranklavaro", +charmap_title: "Ekranklavaro", +charmap_choose_block: "Elekto de lingvo", +charmap_insert:"enmeti tiun signaron" +}); ADDED applications/admin/static/edit_area/plugins/charmap/langs/es.js Index: applications/admin/static/edit_area/plugins/charmap/langs/es.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/langs/es.js @@ -0,0 +1,6 @@ +editArea.add_lang("es",{ +charmap_but: "Visual keyboard", +charmap_title: "Visual keyboard", +charmap_choose_block: "select language block", +charmap_insert:"insert this character" +}); ADDED applications/admin/static/edit_area/plugins/charmap/langs/fr.js Index: applications/admin/static/edit_area/plugins/charmap/langs/fr.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/langs/fr.js @@ -0,0 +1,6 @@ +editArea.add_lang("fr",{ +charmap_but: "Clavier visuel", +charmap_title: "Clavier visuel", +charmap_choose_block: "choix du language", +charmap_insert:"insérer ce caractère" +}); ADDED applications/admin/static/edit_area/plugins/charmap/langs/hr.js Index: applications/admin/static/edit_area/plugins/charmap/langs/hr.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/langs/hr.js @@ -0,0 +1,6 @@ +editArea.add_lang("hr",{ +charmap_but: "Virtualna tipkovnica", +charmap_title: "Virtualna tipkovnica", +charmap_choose_block: "Odaberi blok s jezikom", +charmap_insert:"Ubaci taj znak" +}); ADDED applications/admin/static/edit_area/plugins/charmap/langs/it.js Index: applications/admin/static/edit_area/plugins/charmap/langs/it.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/langs/it.js @@ -0,0 +1,6 @@ +editArea.add_lang("it",{ +charmap_but: "Tastiera visuale", +charmap_title: "Tastiera visuale", +charmap_choose_block: "seleziona blocco", +charmap_insert:"inserisci questo carattere" +}); ADDED applications/admin/static/edit_area/plugins/charmap/langs/ja.js Index: applications/admin/static/edit_area/plugins/charmap/langs/ja.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/langs/ja.js @@ -0,0 +1,6 @@ +editArea.add_lang("ja",{ +charmap_but: "Visual keyboard", +charmap_title: "Visual keyboard", +charmap_choose_block: "select language block", +charmap_insert:"insert this character" +}); ADDED applications/admin/static/edit_area/plugins/charmap/langs/mk.js Index: applications/admin/static/edit_area/plugins/charmap/langs/mk.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/langs/mk.js @@ -0,0 +1,6 @@ +editArea.add_lang("mkn",{ +charmap_but: "Visual keyboard", +charmap_title: "Visual keyboard", +charmap_choose_block: "select language block", +charmap_insert:"insert this character" +}); ADDED applications/admin/static/edit_area/plugins/charmap/langs/nl.js Index: applications/admin/static/edit_area/plugins/charmap/langs/nl.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/langs/nl.js @@ -0,0 +1,6 @@ +editArea.add_lang("nl",{ +charmap_but: "Visueel toetsenbord", +charmap_title: "Visueel toetsenbord", +charmap_choose_block: "Kies een taal blok", +charmap_insert:"Voeg dit symbool in" +}); ADDED applications/admin/static/edit_area/plugins/charmap/langs/pl.js Index: applications/admin/static/edit_area/plugins/charmap/langs/pl.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/langs/pl.js @@ -0,0 +1,6 @@ +editArea.add_lang("pl",{ +charmap_but: "Klawiatura ekranowa", +charmap_title: "Klawiatura ekranowa", +charmap_choose_block: "wybierz grupę znaków", +charmap_insert:"wstaw ten znak" +}); ADDED applications/admin/static/edit_area/plugins/charmap/langs/pt.js Index: applications/admin/static/edit_area/plugins/charmap/langs/pt.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/langs/pt.js @@ -0,0 +1,6 @@ +editArea.add_lang("pt",{ +charmap_but: "Visual keyboard", +charmap_title: "Visual keyboard", +charmap_choose_block: "select language block", +charmap_insert:"insert this character" +}); ADDED applications/admin/static/edit_area/plugins/charmap/langs/ru.js Index: applications/admin/static/edit_area/plugins/charmap/langs/ru.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/langs/ru.js @@ -0,0 +1,6 @@ +editArea.add_lang("ru",{ +charmap_but: "Визуальная клавиатура", +charmap_title: "Визуальная клавиатура", +charmap_choose_block: "выбрать языковой блок", +charmap_insert:"вставить этот символ" +}); ADDED applications/admin/static/edit_area/plugins/charmap/langs/sk.js Index: applications/admin/static/edit_area/plugins/charmap/langs/sk.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/langs/sk.js @@ -0,0 +1,6 @@ +editArea.add_lang("sk",{ +charmap_but: "Vizuálna klávesnica", +charmap_title: "Vizuálna klávesnica", +charmap_choose_block: "vyber jazykový blok", +charmap_insert: "vlož tento znak" +}); ADDED applications/admin/static/edit_area/plugins/charmap/langs/zh.js Index: applications/admin/static/edit_area/plugins/charmap/langs/zh.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/langs/zh.js @@ -0,0 +1,6 @@ +editArea.add_lang("zh",{ +charmap_but: "软键盘", +charmap_title: "软键盘", +charmap_choose_block: "选择一个语言块", +charmap_insert:"插入此字符" +}); ADDED applications/admin/static/edit_area/plugins/charmap/popup.html Index: applications/admin/static/edit_area/plugins/charmap/popup.html ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/charmap/popup.html @@ -0,0 +1,24 @@ + + + + +{$charmap_title} + + + + + +
+
+

{$charmap_title}:

+ +
+ +
+ + + + + ADDED applications/admin/static/edit_area/plugins/test/css/test.css Index: applications/admin/static/edit_area/plugins/test/css/test.css ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/test/css/test.css @@ -0,0 +1,3 @@ +select#test_select{ + background-color: #FF0000; +} ADDED applications/admin/static/edit_area/plugins/test/images/test.gif Index: applications/admin/static/edit_area/plugins/test/images/test.gif ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/test/images/test.gif cannot compute difference between binary files ADDED applications/admin/static/edit_area/plugins/test/langs/bg.js Index: applications/admin/static/edit_area/plugins/test/langs/bg.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/test/langs/bg.js @@ -0,0 +1,10 @@ +/* + * Bulgarian translation + * Author: Valentin Hristov + * Company: SOFTKIT Bulgarian + * Site: http://www.softkit-bg.com + */ +editArea.add_lang("bg",{ +test_select: "избери таг", +test_but: "тествай копието" +}); ADDED applications/admin/static/edit_area/plugins/test/langs/cs.js Index: applications/admin/static/edit_area/plugins/test/langs/cs.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/test/langs/cs.js @@ -0,0 +1,4 @@ +editArea.add_lang("cs",{ +test_select: "select tag", +test_but: "test button" +}); ADDED applications/admin/static/edit_area/plugins/test/langs/de.js Index: applications/admin/static/edit_area/plugins/test/langs/de.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/test/langs/de.js @@ -0,0 +1,4 @@ +editArea.add_lang("de",{ +test_select: "Tag auswählen", +test_but: "Test Button" +}); ADDED applications/admin/static/edit_area/plugins/test/langs/dk.js Index: applications/admin/static/edit_area/plugins/test/langs/dk.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/test/langs/dk.js @@ -0,0 +1,4 @@ +editArea.add_lang("dk",{ +test_select: "select tag", +test_but: "test button" +}); ADDED applications/admin/static/edit_area/plugins/test/langs/en.js Index: applications/admin/static/edit_area/plugins/test/langs/en.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/test/langs/en.js @@ -0,0 +1,4 @@ +editArea.add_lang("en",{ +test_select: "select tag", +test_but: "test button" +}); ADDED applications/admin/static/edit_area/plugins/test/langs/eo.js Index: applications/admin/static/edit_area/plugins/test/langs/eo.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/test/langs/eo.js @@ -0,0 +1,4 @@ +editArea.add_lang("eo",{ +test_select:"elekto de marko", +test_but: "provo-butono" +}); ADDED applications/admin/static/edit_area/plugins/test/langs/es.js Index: applications/admin/static/edit_area/plugins/test/langs/es.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/test/langs/es.js @@ -0,0 +1,4 @@ +editArea.add_lang("es",{ +test_select: "select tag", +test_but: "test button" +}); ADDED applications/admin/static/edit_area/plugins/test/langs/fr.js Index: applications/admin/static/edit_area/plugins/test/langs/fr.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/test/langs/fr.js @@ -0,0 +1,4 @@ +editArea.add_lang("fr",{ +test_select:"choix balise", +test_but: "bouton de test" +}); ADDED applications/admin/static/edit_area/plugins/test/langs/hr.js Index: applications/admin/static/edit_area/plugins/test/langs/hr.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/test/langs/hr.js @@ -0,0 +1,4 @@ +editArea.add_lang("hr",{ +test_select: "Odaberi tag", +test_but: "Probna tipka" +}); ADDED applications/admin/static/edit_area/plugins/test/langs/it.js Index: applications/admin/static/edit_area/plugins/test/langs/it.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/test/langs/it.js @@ -0,0 +1,4 @@ +editArea.add_lang("it",{ +test_select: "seleziona tag", +test_but: "pulsante di test" +}); ADDED applications/admin/static/edit_area/plugins/test/langs/ja.js Index: applications/admin/static/edit_area/plugins/test/langs/ja.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/test/langs/ja.js @@ -0,0 +1,4 @@ +editArea.add_lang("ja",{ +test_select: "select tag", +test_but: "test button" +}); ADDED applications/admin/static/edit_area/plugins/test/langs/mk.js Index: applications/admin/static/edit_area/plugins/test/langs/mk.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/test/langs/mk.js @@ -0,0 +1,4 @@ +editArea.add_lang("mk",{ +test_select: "select tag", +test_but: "test button" +}); ADDED applications/admin/static/edit_area/plugins/test/langs/nl.js Index: applications/admin/static/edit_area/plugins/test/langs/nl.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/test/langs/nl.js @@ -0,0 +1,4 @@ +editArea.add_lang("nl",{ +test_select: "select tag", +test_but: "test button" +}); ADDED applications/admin/static/edit_area/plugins/test/langs/pl.js Index: applications/admin/static/edit_area/plugins/test/langs/pl.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/test/langs/pl.js @@ -0,0 +1,4 @@ +editArea.add_lang("pl",{ +test_select: "wybierz tag", +test_but: "test" +}); ADDED applications/admin/static/edit_area/plugins/test/langs/pt.js Index: applications/admin/static/edit_area/plugins/test/langs/pt.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/test/langs/pt.js @@ -0,0 +1,4 @@ +editArea.add_lang("pt",{ +test_select: "select tag", +test_but: "test button" +}); ADDED applications/admin/static/edit_area/plugins/test/langs/ru.js Index: applications/admin/static/edit_area/plugins/test/langs/ru.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/test/langs/ru.js @@ -0,0 +1,4 @@ +editArea.add_lang("ru",{ +test_select: "выбрать тэг", +test_but: "тестировать кнопку" +}); ADDED applications/admin/static/edit_area/plugins/test/langs/sk.js Index: applications/admin/static/edit_area/plugins/test/langs/sk.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/test/langs/sk.js @@ -0,0 +1,4 @@ +editArea.add_lang("sk",{ +test_select: "vyber tag", +test_but: "testovacie tlačidlo" +}); ADDED applications/admin/static/edit_area/plugins/test/langs/zh.js Index: applications/admin/static/edit_area/plugins/test/langs/zh.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/test/langs/zh.js @@ -0,0 +1,4 @@ +editArea.add_lang("zh",{ +test_select: "选择标签", +test_but: "测试按钮" +}); ADDED applications/admin/static/edit_area/plugins/test/test.js Index: applications/admin/static/edit_area/plugins/test/test.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/test/test.js @@ -0,0 +1,110 @@ +/** + * Plugin designed for test prupose. It add a button (that manage an alert) and a select (that allow to insert tags) in the toolbar. + * This plugin also disable the "f" key in the editarea, and load a CSS and a JS file + */ +var EditArea_test= { + /** + * Get called once this file is loaded (editArea still not initialized) + * + * @return nothing + */ + init: function(){ + // alert("test init: "+ this._someInternalFunction(2, 3)); + editArea.load_css(this.baseURL+"css/test.css"); + editArea.load_script(this.baseURL+"test2.js"); + } + /** + * Returns the HTML code for a specific control string or false if this plugin doesn't have that control. + * A control can be a button, select list or any other HTML item to present in the EditArea user interface. + * Language variables such as {$lang_somekey} will also be replaced with contents from + * the language packs. + * + * @param {string} ctrl_name: the name of the control to add + * @return HTML code for a specific control or false. + * @type string or boolean + */ + ,get_control_html: function(ctrl_name){ + switch(ctrl_name){ + case "test_but": + // Control id, button img, command + return parent.editAreaLoader.get_button_html('test_but', 'test.gif', 'test_cmd', false, this.baseURL); + case "test_select": + html= ""; + return html; + } + return false; + } + /** + * Get called once EditArea is fully loaded and initialised + * + * @return nothing + */ + ,onload: function(){ + alert("test load"); + } + + /** + * Is called each time the user touch a keyboard key. + * + * @param (event) e: the keydown event + * @return true - pass to next handler in chain, false - stop chain execution + * @type boolean + */ + ,onkeydown: function(e){ + var str= String.fromCharCode(e.keyCode); + // desactivate the "f" character + if(str.toLowerCase()=="f"){ + return true; + } + return false; + } + + /** + * Executes a specific command, this function handles plugin commands. + * + * @param {string} cmd: the name of the command being executed + * @param {unknown} param: the parameter of the command + * @return true - pass to next handler in chain, false - stop chain execution + * @type boolean + */ + ,execCommand: function(cmd, param){ + // Handle commands + switch(cmd){ + case "test_select_change": + var val= document.getElementById("test_select").value; + if(val!=-1) + parent.editAreaLoader.insertTags(editArea.id, "<"+val+">", ""); + document.getElementById("test_select").options[0].selected=true; + return false; + case "test_cmd": + alert("user clicked on test_cmd"); + return false; + } + // Pass to next handler in chain + return true; + } + + /** + * This is just an internal plugin method, prefix all internal methods with a _ character. + * The prefix is needed so they doesn't collide with future EditArea callback functions. + * + * @param {string} a Some arg1. + * @param {string} b Some arg2. + * @return Some return. + * @type unknown + */ + ,_someInternalFunction : function(a, b) { + return a+b; + } +}; + +// Adds the plugin class to the list of available EditArea plugins +editArea.add_plugin("test", EditArea_test); ADDED applications/admin/static/edit_area/plugins/test/test2.js Index: applications/admin/static/edit_area/plugins/test/test2.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/test/test2.js @@ -0,0 +1,1 @@ +alert("test2.js is loaded from test plugin"); ADDED applications/admin/static/edit_area/plugins/zencoding/core.js Index: applications/admin/static/edit_area/plugins/zencoding/core.js ================================================================== --- /dev/null +++ applications/admin/static/edit_area/plugins/zencoding/core.js @@ -0,0 +1,4 @@ +var zen_settings={"variables":{"lang":"en","locale":"en-US","charset":"UTF-8","profile":"xhtml","indentation":"\t"},"css":{"snippets":{"@i":"@import url(|);","@m":"@media print {\n\t|\n}","@f":"@font-face {\n\tfont-family:|;\n\tsrc:url(|);\n}","!":"!important","pos":"position:|;","pos:s":"position:static;","pos:a":"position:absolute;","pos:r":"position:relative;","pos:f":"position:fixed;","t":"top:|;","t:a":"top:auto;","r":"right:|;","r:a":"right:auto;","b":"bottom:|;","b:a":"bottom:auto;","l":"left:|;","l:a":"left:auto;","z":"z-index:|;","z:a":"z-index:auto;","fl":"float:|;","fl:n":"float:none;","fl:l":"float:left;","fl:r":"float:right;","cl":"clear:|;","cl:n":"clear:none;","cl:l":"clear:left;","cl:r":"clear:right;","cl:b":"clear:both;","d":"display:|;","d:n":"display:none;","d:b":"display:block;","d:ib":"display:inline;","d:li":"display:list-item;","d:ri":"display:run-in;","d:cp":"display:compact;","d:tb":"display:table;","d:itb":"display:inline-table;","d:tbcp":"display:table-caption;","d:tbcl":"display:table-column;","d:tbclg":"display:table-column-group;","d:tbhg":"display:table-header-group;","d:tbfg":"display:table-footer-group;","d:tbr":"display:table-row;","d:tbrg":"display:table-row-group;","d:tbc":"display:table-cell;","d:rb":"display:ruby;","d:rbb":"display:ruby-base;","d:rbbg":"display:ruby-base-group;","d:rbt":"display:ruby-text;","d:rbtg":"display:ruby-text-group;","v":"visibility:|;","v:v":"visibility:visible;","v:h":"visibility:hidden;","v:c":"visibility:collapse;","ov":"overflow:|;","ov:v":"overflow:visible;","ov:h":"overflow:hidden;","ov:s":"overflow:scroll;","ov:a":"overflow:auto;","ovx":"overflow-x:|;","ovx:v":"overflow-x:visible;","ovx:h":"overflow-x:hidden;","ovx:s":"overflow-x:scroll;","ovx:a":"overflow-x:auto;","ovy":"overflow-y:|;","ovy:v":"overflow-y:visible;","ovy:h":"overflow-y:hidden;","ovy:s":"overflow-y:scroll;","ovy:a":"overflow-y:auto;","ovs":"overflow-style:|;","ovs:a":"overflow-style:auto;","ovs:s":"overflow-style:scrollbar;","ovs:p":"overflow-style:panner;","ovs:m":"overflow-style:move;","ovs:mq":"overflow-style:marquee;","zoo":"zoom:1;","cp":"clip:|;","cp:a":"clip:auto;","cp:r":"clip:rect(|);","bxz":"box-sizing:|;","bxz:cb":"box-sizing:content-box;","bxz:bb":"box-sizing:border-box;","bxsh":"box-shadow:|;","bxsh:n":"box-shadow:none;","bxsh:w":"-webkit-box-shadow:0 0 0 #000;","bxsh:m":"-moz-box-shadow:0 0 0 0 #000;","m":"margin:|;","m:a":"margin:auto;","m:0":"margin:0;","m:2":"margin:0 0;","m:3":"margin:0 0 0;","m:4":"margin:0 0 0 0;","mt":"margin-top:|;","mt:a":"margin-top:auto;","mr":"margin-right:|;","mr:a":"margin-right:auto;","mb":"margin-bottom:|;","mb:a":"margin-bottom:auto;","ml":"margin-left:|;","ml:a":"margin-left:auto;","p":"padding:|;","p:0":"padding:0;","p:2":"padding:0 0;","p:3":"padding:0 0 0;","p:4":"padding:0 0 0 0;","pt":"padding-top:|;","pr":"padding-right:|;","pb":"padding-bottom:|;","pl":"padding-left:|;","w":"width:|;","w:a":"width:auto;","h":"height:|;","h:a":"height:auto;","maw":"max-width:|;","maw:n":"max-width:none;","mah":"max-height:|;","mah:n":"max-height:none;","miw":"min-width:|;","mih":"min-height:|;","o":"outline:|;","o:n":"outline:none;","oo":"outline-offset:|;","ow":"outline-width:|;","os":"outline-style:|;","oc":"outline-color:#000;","oc:i":"outline-color:invert;","bd":"border:|;","bd+":"border:1px solid #000;","bd:n":"border:none;","bdbk":"border-break:|;","bdbk:c":"border-break:close;","bdcl":"border-collapse:|;","bdcl:c":"border-collapse:collapse;","bdcl:s":"border-collapse:separate;","bdc":"border-color:#000;","bdi":"border-image:url(|);","bdi:n":"border-image:none;","bdi:w":"-webkit-border-image:url(|) 0 0 0 0 stretch stretch;","bdi:m":"-moz-border-image:url(|) 0 0 0 0 stretch stretch;","bdti":"border-top-image:url(|);","bdti:n":"border-top-image:none;","bdri":"border-right-image:url(|);","bdri:n":"border-right-image:none;","bdbi":"border-bottom-image:url(|);","bdbi:n":"border-bottom-image:none;","bdli":"border-left-image:url(|);","bdli:n":"border-left-image:none;","bdci":"border-corner-image:url(|);","bdci:n":"border-corner-image:none;","bdci:c":"border-corner-image:continue;","bdtli":"border-top-left-image:url(|);","bdtli:n":"border-top-left-image:none;","bdtli:c":"border-top-left-image:continue;","bdtri":"border-top-right-image:url(|);","bdtri:n":"border-top-right-image:none;","bdtri:c":"border-top-right-image:continue;","bdbri":"border-bottom-right-image:url(|);","bdbri:n":"border-bottom-right-image:none;","bdbri:c":"border-bottom-right-image:continue;","bdbli":"border-bottom-left-image:url(|);","bdbli:n":"border-bottom-left-image:none;","bdbli:c":"border-bottom-left-image:continue;","bdf":"border-fit:|;","bdf:c":"border-fit:clip;","bdf:r":"border-fit:repeat;","bdf:sc":"border-fit:scale;","bdf:st":"border-fit:stretch;","bdf:ow":"border-fit:overwrite;","bdf:of":"border-fit:overflow;","bdf:sp":"border-fit:space;","bdl":"border-length:|;","bdl:a":"border-length:auto;","bdsp":"border-spacing:|;","bds":"border-style:|;","bds:n":"border-style:none;","bds:h":"border-style:hidden;","bds:dt":"border-style:dotted;","bds:ds":"border-style:dashed;","bds:s":"border-style:solid;","bds:db":"border-style:double;","bds:dtds":"border-style:dot-dash;","bds:dtdtds":"border-style:dot-dot-dash;","bds:w":"border-style:wave;","bds:g":"border-style:groove;","bds:r":"border-style:ridge;","bds:i":"border-style:inset;","bds:o":"border-style:outset;","bdw":"border-width:|;","bdt":"border-top:|;","bdt+":"border-top:1px solid #000;","bdt:n":"border-top:none;","bdtw":"border-top-width:|;","bdts":"border-top-style:|;","bdts:n":"border-top-style:none;","bdtc":"border-top-color:#000;","bdr":"border-right:|;","bdr+":"border-right:1px solid #000;","bdr:n":"border-right:none;","bdrw":"border-right-width:|;","bdrs":"border-right-style:|;","bdrs:n":"border-right-style:none;","bdrc":"border-right-color:#000;","bdb":"border-bottom:|;","bdb+":"border-bottom:1px solid #000;","bdb:n":"border-bottom:none;","bdbw":"border-bottom-width:|;","bdbs":"border-bottom-style:|;","bdbs:n":"border-bottom-style:none;","bdbc":"border-bottom-color:#000;","bdl":"border-left:|;","bdl+":"border-left:1px solid #000;","bdl:n":"border-left:none;","bdlw":"border-left-width:|;","bdls":"border-left-style:|;","bdls:n":"border-left-style:none;","bdlc":"border-left-color:#000;","bdrs":"border-radius:|;","bdtrrs":"border-top-right-radius:|;","bdtlrs":"border-top-left-radius:|;","bdbrrs":"border-bottom-right-radius:|;","bdblrs":"border-bottom-left-radius:|;","bg":"background:|;","bg+":"background:#FFF url(|) 0 0 no-repeat;","bg:n":"background:none;","bg:ie":"filter:progid:DXImageTransform.Microsoft.AlphaImageLoader(src='|x.png');","bgc":"background-color:#FFF;","bgi":"background-image:url(|);","bgi:n":"background-image:none;","bgr":"background-repeat:|;","bgr:n":"background-repeat:no-repeat;","bgr:x":"background-repeat:repeat-x;","bgr:y":"background-repeat:repeat-y;","bga":"background-attachment:|;","bga:f":"background-attachment:fixed;","bga:s":"background-attachment:scroll;","bgp":"background-position:0 0;","bgpx":"background-position-x:|;","bgpy":"background-position-y:|;","bgbk":"background-break:|;","bgbk:bb":"background-break:bounding-box;","bgbk:eb":"background-break:each-box;","bgbk:c":"background-break:continuous;","bgcp":"background-clip:|;","bgcp:bb":"background-clip:border-box;","bgcp:pb":"background-clip:padding-box;","bgcp:cb":"background-clip:content-box;","bgcp:nc":"background-clip:no-clip;","bgo":"background-origin:|;","bgo:pb":"background-origin:padding-box;","bgo:bb":"background-origin:border-box;","bgo:cb":"background-origin:content-box;","bgz":"background-size:|;","bgz:a":"background-size:auto;","bgz:ct":"background-size:contain;","bgz:cv":"background-size:cover;","c":"color:#000;","tbl":"table-layout:|;","tbl:a":"table-layout:auto;","tbl:f":"table-layout:fixed;","cps":"caption-side:|;","cps:t":"caption-side:top;","cps:b":"caption-side:bottom;","ec":"empty-cells:|;","ec:s":"empty-cells:show;","ec:h":"empty-cells:hide;","lis":"list-style:|;","lis:n":"list-style:none;","lisp":"list-style-position:|;","lisp:i":"list-style-position:inside;","lisp:o":"list-style-position:outside;","list":"list-style-type:|;","list:n":"list-style-type:none;","list:d":"list-style-type:disc;","list:c":"list-style-type:circle;","list:s":"list-style-type:square;","list:dc":"list-style-type:decimal;","list:dclz":"list-style-type:decimal-leading-zero;","list:lr":"list-style-type:lower-roman;","list:ur":"list-style-type:upper-roman;","lisi":"list-style-image:|;","lisi:n":"list-style-image:none;","q":"quotes:|;","q:n":"quotes:none;","q:ru":"quotes:'\00AB' '\00BB' '\201E' '\201C';","q:en":"quotes:'\201C' '\201D' '\2018' '\2019';","ct":"content:|;","ct:n":"content:normal;","ct:oq":"content:open-quote;","ct:noq":"content:no-open-quote;","ct:cq":"content:close-quote;","ct:ncq":"content:no-close-quote;","ct:a":"content:attr(|);","ct:c":"content:counter(|);","ct:cs":"content:counters(|);","coi":"counter-increment:|;","cor":"counter-reset:|;","va":"vertical-align:|;","va:sup":"vertical-align:super;","va:t":"vertical-align:top;","va:tt":"vertical-align:text-top;","va:m":"vertical-align:middle;","va:bl":"vertical-align:baseline;","va:b":"vertical-align:bottom;","va:tb":"vertical-align:text-bottom;","va:sub":"vertical-align:sub;","ta":"text-align:|;","ta:l":"text-align:left;","ta:c":"text-align:center;","ta:r":"text-align:right;","tal":"text-align-last:|;","tal:a":"text-align-last:auto;","tal:l":"text-align-last:left;","tal:c":"text-align-last:center;","tal:r":"text-align-last:right;","td":"text-decoration:|;","td:n":"text-decoration:none;","td:u":"text-decoration:underline;","td:o":"text-decoration:overline;","td:l":"text-decoration:line-through;","te":"text-emphasis:|;","te:n":"text-emphasis:none;","te:ac":"text-emphasis:accent;","te:dt":"text-emphasis:dot;","te:c":"text-emphasis:circle;","te:ds":"text-emphasis:disc;","te:b":"text-emphasis:before;","te:a":"text-emphasis:after;","th":"text-height:|;","th:a":"text-height:auto;","th:f":"text-height:font-size;","th:t":"text-height:text-size;","th:m":"text-height:max-size;","ti":"text-indent:|;","ti:-":"text-indent:-9999px;","tj":"text-justify:|;","tj:a":"text-justify:auto;","tj:iw":"text-justify:inter-word;","tj:ii":"text-justify:inter-ideograph;","tj:ic":"text-justify:inter-cluster;","tj:d":"text-justify:distribute;","tj:k":"text-justify:kashida;","tj:t":"text-justify:tibetan;","to":"text-outline:|;","to+":"text-outline:0 0 #000;","to:n":"text-outline:none;","tr":"text-replace:|;","tr:n":"text-replace:none;","tt":"text-transform:|;","tt:n":"text-transform:none;","tt:c":"text-transform:capitalize;","tt:u":"text-transform:uppercase;","tt:l":"text-transform:lowercase;","tw":"text-wrap:|;","tw:n":"text-wrap:normal;","tw:no":"text-wrap:none;","tw:u":"text-wrap:unrestricted;","tw:s":"text-wrap:suppress;","tsh":"text-shadow:|;","tsh+":"text-shadow:0 0 0 #000;","tsh:n":"text-shadow:none;","lh":"line-height:|;","whs":"white-space:|;","whs:n":"white-space:normal;","whs:p":"white-space:pre;","whs:nw":"white-space:nowrap;","whs:pw":"white-space:pre-wrap;","whs:pl":"white-space:pre-line;","whsc":"white-space-collapse:|;","whsc:n":"white-space-collapse:normal;","whsc:k":"white-space-collapse:keep-all;","whsc:l":"white-space-collapse:loose;","whsc:bs":"white-space-collapse:break-strict;","whsc:ba":"white-space-collapse:break-all;","wob":"word-break:|;","wob:n":"word-break:normal;","wob:k":"word-break:keep-all;","wob:l":"word-break:loose;","wob:bs":"word-break:break-strict;","wob:ba":"word-break:break-all;","wos":"word-spacing:|;","wow":"word-wrap:|;","wow:nm":"word-wrap:normal;","wow:n":"word-wrap:none;","wow:u":"word-wrap:unrestricted;","wow:s":"word-wrap:suppress;","lts":"letter-spacing:|;","f":"font:|;","f+":"font:1em Arial,sans-serif;","fw":"font-weight:|;","fw:n":"font-weight:normal;","fw:b":"font-weight:bold;","fw:br":"font-weight:bolder;","fw:lr":"font-weight:lighter;","fs":"font-style:|;","fs:n":"font-style:normal;","fs:i":"font-style:italic;","fs:o":"font-style:oblique;","fv":"font-variant:|;","fv:n":"font-variant:normal;","fv:sc":"font-variant:small-caps;","fz":"font-size:|;","fza":"font-size-adjust:|;","fza:n":"font-size-adjust:none;","ff":"font-family:|;","ff:s":"font-family:serif;","ff:ss":"font-family:sans-serif;","ff:c":"font-family:cursive;","ff:f":"font-family:fantasy;","ff:m":"font-family:monospace;","fef":"font-effect:|;","fef:n":"font-effect:none;","fef:eg":"font-effect:engrave;","fef:eb":"font-effect:emboss;","fef:o":"font-effect:outline;","fem":"font-emphasize:|;","femp":"font-emphasize-position:|;","femp:b":"font-emphasize-position:before;","femp:a":"font-emphasize-position:after;","fems":"font-emphasize-style:|;","fems:n":"font-emphasize-style:none;","fems:ac":"font-emphasize-style:accent;","fems:dt":"font-emphasize-style:dot;","fems:c":"font-emphasize-style:circle;","fems:ds":"font-emphasize-style:disc;","fsm":"font-smooth:|;","fsm:a":"font-smooth:auto;","fsm:n":"font-smooth:never;","fsm:aw":"font-smooth:always;","fst":"font-stretch:|;","fst:n":"font-stretch:normal;","fst:uc":"font-stretch:ultra-condensed;","fst:ec":"font-stretch:extra-condensed;","fst:c":"font-stretch:condensed;","fst:sc":"font-stretch:semi-condensed;","fst:se":"font-stretch:semi-expanded;","fst:e":"font-stretch:expanded;","fst:ee":"font-stretch:extra-expanded;","fst:ue":"font-stretch:ultra-expanded;","op":"opacity:|;","op:ie":"filter:progid:DXImageTransform.Microsoft.Alpha(Opacity=100);","op:ms":"-ms-filter:'progid:DXImageTransform.Microsoft.Alpha(Opacity=100)';","rz":"resize:|;","rz:n":"resize:none;","rz:b":"resize:both;","rz:h":"resize:horizontal;","rz:v":"resize:vertical;","cur":"cursor:|;","cur:a":"cursor:auto;","cur:d":"cursor:default;","cur:c":"cursor:crosshair;","cur:ha":"cursor:hand;","cur:he":"cursor:help;","cur:m":"cursor:move;","cur:p":"cursor:pointer;","cur:t":"cursor:text;","pgbb":"page-break-before:|;","pgbb:au":"page-break-before:auto;","pgbb:al":"page-break-before:always;","pgbb:l":"page-break-before:left;","pgbb:r":"page-break-before:right;","pgbi":"page-break-inside:|;","pgbi:au":"page-break-inside:auto;","pgbi:av":"page-break-inside:avoid;","pgba":"page-break-after:|;","pgba:au":"page-break-after:auto;","pgba:al":"page-break-after:always;","pgba:l":"page-break-after:left;","pgba:r":"page-break-after:right;","orp":"orphans:|;","wid":"widows:|;"}},"html":{"snippets":{"cc:ie6":"","cc:ie":"","cc:noie":"\n\t${child}|\n","html:4t":'\n'+'\n'+"\n"+" \n"+' \n'+"\n"+"\n\t${child}|\n\n"+"","html:4s":'\n'+'\n'+"\n"+" \n"+' \n'+"\n"+"\n\t${child}|\n\n"+"","html:xt":'\n'+'\n'+"\n"+" \n"+' \n'+"\n"+"\n\t${child}|\n\n"+"","html:xs":'\n'+'\n'+"\n"+" \n"+' \n'+"\n"+"\n\t${child}|\n\n"+"","html:xxs":'\n'+'\n'+"\n"+" \n"+' \n'+"\n"+"\n\t${child}|\n\n"+"","html:5":"\n"+'\n'+"\n"+" \n"+' \n'+"\n"+"\n\t${child}|\n\n"+""},"abbreviations":{"a":'',"a:link":'',"a:mail":'',"abbr":'',"acronym":'',"base":'',"bdo":'',"bdo:r":'',"bdo:l":'',"link:css":'',"link:print":'',"link:favicon":'',"link:touch":'',"link:rss":'',"link:atom":'',"meta:utf":'',"meta:win":'',"meta:compat":'',"style":'',"script":' + +{{if request.function=='index':}} +

{{=T("Available databases and tables")}}

+ {{if not databases:}}{{=T("No databases in this application")}}{{pass}} + {{for db in sorted(databases):}} + {{for table in databases[db].tables:}} + {{qry='%s.%s.id>0'%(db,table)}} + {{tbl=databases[db][table]}} + {{if hasattr(tbl,'_primarykey'):}} + {{if tbl._primarykey:}} + {{firstkey=tbl[tbl._primarykey[0]]}} + {{if firstkey.type in ['string','text']:}} + {{qry='%s.%s.%s!=""'%(db,table,firstkey.name)}} + {{else:}} + {{qry='%s.%s.%s>0'%(db,table,firstkey.name)}} + {{pass}} + {{else:}} + {{qry=''}} + {{pass}} + {{pass}} +

{{=A("%s.%s" % (db,table),_href=URL('select',args=[db],vars=dict(query=qry)))}} +

+ [ {{=A(str(T('insert new'))+' '+table,_href=URL('insert',args=[db,table]))}} ] +

+ {{pass}} + {{pass}} + +{{elif request.function=='select':}} +

{{=XML(str(T("database %s select"))%A(request.args[0],_href=URL('index'))) }} +

+ {{if table:}} + [ {{=A(str(T('insert new %s'))%table,_href=URL('insert',args=[request.args[0],table]))}} ]

+

{{=T("Rows in table")}}


+ {{else:}} +

{{=T("Rows selected")}}


+ {{pass}} + {{=form}} +

{{=T('The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.')}}
+ {{=T('Use (...)&(...) for AND, (...)|(...) for OR, and ~(...) for NOT to build more complex queries.')}}
+ {{=T('"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN')}}

+

+

{{=nrows}} {{=T("selected")}}

+ {{if start>0:}}[ {{=A(T('previous 100 rows'),_href=URL('select',args=request.args[0],vars=dict(start=start-100)))}} ]{{pass}} + {{if stop + {{linkto=URL('update',args=request.args[0])}} + {{upload=URL('download',args=request.args[0])}} + {{=SQLTABLE(rows,linkto,upload,orderby=True,_class='sortable')}} + + {{pass}} +

{{=T("Import/Export")}}


+ [ {{=T("export as csv file")}} ] + {{if table:}} + {{=FORM(str(T('or import from csv file'))+" ",INPUT(_type='file',_name='csvfile'),INPUT(_type='hidden',_value=table,_name='table'),INPUT(_type='submit',_value='import'))}} + {{pass}} + + +{{elif request.function=='insert':}} +

{{=T("database")}} {{=A(request.args[0],_href=URL('index'))}} + {{if hasattr(table,'_primarykey'):}} + {{fieldname=table._primarykey[0]}} + {{dbname=request.args[0]}} + {{tablename=request.args[1]}} + {{cond = table[fieldname].type in ['string','text'] and '!=""' or '>0'}} + {{=T("table")}} {{=A(tablename,_href=URL('select',args=dbname,vars=dict(query='%s.%s.%s%s'%(dbname,tablename,fieldname,cond))))}} + {{else:}} + {{=T("table")}} {{=A(request.args[1],_href=URL('select',args=request.args[0],vars=dict(query='%s.%s.id>0'%tuple(request.args[:2]))))}} + {{pass}} +

+

{{=T("New Record")}}


+ {{=form}} + + + +{{elif request.function=='update':}} +

{{=T("database")}} {{=A(request.args[0],_href=URL('index'))}} + {{if hasattr(table,'_primarykey'):}} + {{fieldname=request.vars.keys()[0]}} + {{dbname=request.args[0]}} + {{tablename=request.args[1]}} + {{cond = table[fieldname].type in ['string','text'] and '!=""' or '>0'}} + {{=T("table")}} {{=A(tablename,_href=URL('select',args=dbname,vars=dict(query='%s.%s.%s%s'%(dbname,tablename,fieldname,cond))))}} + {{=T("record")}} {{=A('%s=%s'%request.vars.items()[0],_href=URL('update',args=request.args[:2],vars=request.vars))}} + {{else:}} + {{=T("table")}} {{=A(request.args[1],_href=URL('select',args=request.args[0],vars=dict(query='%s.%s.id>0'%tuple(request.args[:2]))))}} + {{=T("record id")}} {{=A(request.args[2],_href=URL('update',args=request.args[:3]))}} + {{pass}} +

+

{{=T("Edit current record")}}



{{=form}} + + + +{{elif request.function=='state':}} +

{{=T("Internal State")}}

+

{{=T("Current request")}}

+ {{=BEAUTIFY(request)}} +

{{=T("Current response")}}

+ {{=BEAUTIFY(response)}} +

{{=T("Current session")}}

+ {{=BEAUTIFY(session)}} + + +{{elif request.function == 'ccache':}} +

Cache

+
+
+
+ Statistics +
+
+

Overview

+

+ Hit Ratio: + {{=total['ratio']}}% + ({{=total['hits']}} hits + and {{=total['misses']}} misses) +

+

+ Size of cache: + {{=total['objects']}} items, + {{=total['bytes']}} bytes + {{if total['bytes'] > 524287:}} + ({{="%.0d" % (total['bytes'] / 1048576)}} MB) + {{pass}} +

+

+ Cache contains items up to + {{="%02d" % total['oldest'][0]}} hours + {{="%02d" % total['oldest'][1]}} minutes + {{="%02d" % total['oldest'][2]}} seconds old. +

+

RAM

+

+ Hit Ratio: + {{=ram['ratio']}}% + ({{=ram['hits']}} hits + and {{=ram['misses']}} misses) +

+

+ Size of cache: + {{=ram['objects']}} items, + {{=ram['bytes']}} bytes + {{if ram['bytes'] > 524287:}} + ({{=ram['bytes'] / 1048576}} MB) + {{pass}} +

+

+ RAM contains items up to + {{="%02d" % ram['oldest'][0]}} hours + {{="%02d" % ram['oldest'][1]}} minutes + {{="%02d" % ram['oldest'][2]}} seconds old. +

+

DISK

+

+ Hit Ratio: + {{=disk['ratio']}}% + ({{=disk['hits']}} hits + and {{=disk['misses']}} misses) +

+

+ Size of cache: + {{=disk['objects']}} items, + {{=disk['bytes']}} bytes + {{if disk['bytes'] > 524287:}} + ({{=disk['bytes'] / 1048576}} MB) + {{pass}} +

+

+ DISK contains items up to + {{="%02d" % disk['oldest'][0]}} hours + {{="%02d" % disk['oldest'][1]}} minutes + {{="%02d" % disk['oldest'][2]}} seconds old. +

+
+ +
+ Manage Cache +
+
+

+ {{=form}} +

+
+
+
+
+{{pass}} ADDED applications/admin/views/debug/index.html Index: applications/admin/views/debug/index.html ================================================================== --- /dev/null +++ applications/admin/views/debug/index.html @@ -0,0 +1,159 @@ +{{extend 'layout.html'}} + +{{block sectionclass}}shell{{end}} + + +
+ + +
+
+
>>>
+
+ + Type PDB debugger command in here and hit Return (Enter) to execute it. +
+
+
+
+ +
+
    +
  • Using the shell may lock the database to other users of this app.
    • +
+
+ + ADDED applications/admin/views/default/about.html Index: applications/admin/views/default/about.html ================================================================== --- /dev/null +++ applications/admin/views/default/about.html @@ -0,0 +1,12 @@ +{{extend 'layout.html'}} + +{{block sectionclass}}about{{end}} + +

{{=T("About application")}} "{{=app}}"

+

{{=T("About")}} {{=app}}

+

{{=button(URL('edit/%s/ABOUT' % (app)), T('edit'))}}

+
{{=about}}
+

{{=T('License for')}} {{=app}}

+

{{=button(URL('edit/%s/LICENSE' % (app)), T('edit'))}}

+
{{=license}}
+ ADDED applications/admin/views/default/amy_ajax.html Index: applications/admin/views/default/amy_ajax.html ================================================================== --- /dev/null +++ applications/admin/views/default/amy_ajax.html @@ -0,0 +1,76 @@ + + + +{{if request.args[1]=="views":}} + +{{else:}} + +{{pass}} + + + ADDED applications/admin/views/default/change_password.html Index: applications/admin/views/default/change_password.html ================================================================== --- /dev/null +++ applications/admin/views/default/change_password.html @@ -0,0 +1,9 @@ +{{extend 'layout.html'}} + +{{block sectionclass}}change_password{{end}} + +

Change Admin Password

+ +
+ {{=form}} +
ADDED applications/admin/views/default/delete.html Index: applications/admin/views/default/delete.html ================================================================== --- /dev/null +++ applications/admin/views/default/delete.html @@ -0,0 +1,8 @@ +{{extend 'layout.html'}} + +{{block sectionclass}}delete{{end}} + +
+

{{=T('Are you sure you want to delete file "%s"?', filename)}}

+

{{=FORM(INPUT(_type='submit',_name='nodelete',_value=T('Abort')),INPUT(_type='hidden',_name='sender',_value=sender), _class="inline")}}{{=FORM(INPUT(_type='submit',_name='delete',_value=T('Delete')),INPUT(_type='hidden',_name='sender',_value=sender), _class="inline")}}

+
ADDED applications/admin/views/default/delete_plugin.html Index: applications/admin/views/default/delete_plugin.html ================================================================== --- /dev/null +++ applications/admin/views/default/delete_plugin.html @@ -0,0 +1,9 @@ +{{extend 'layout.html'}} + +{{block sectionclass}}delete_plugin{{end}} + +
+

{{=T('Are you sure you want to delete plugin "%s"?', plugin)}}

+

{{=FORM(INPUT(_type='submit',_name='nodelete',_value=T('NO')))}}

+

{{=FORM(INPUT(_type='submit',_name='delete',_value=T('YES')))}}

+
ADDED applications/admin/views/default/design.html Index: applications/admin/views/default/design.html ================================================================== --- /dev/null +++ applications/admin/views/default/design.html @@ -0,0 +1,313 @@ +{{extend 'layout.html'}} +{{ +def all(items): + return reduce(lambda a,b:a and b,items,True) +def peekfile(path,file): + return A(file.replace('\\\\','/'),_href=URL('peek', args=(app, path, file))) +def editfile(path,file): + return A(SPAN(T('edit')),_class='button editbutton',_href=URL('edit', args=(app, path, file))) +def testfile(path,file): + return A(TAG[''](IMG(_src=URL('static', 'images/test_icon.png'), _alt=T('test')), SPAN(T("Run tests in this file (to run all files, you may also use the button labelled 'test')"))), _class='icon test tooltip',_href=URL('test', args=(app, file))) +def editlanguagefile(path,file): + return A(SPAN(T('edit')),_class='button editbutton',_href=URL('edit_language', args=(app, path, file))) +def file_upload_form(location): + form=FORM(T("upload file:")," ", + INPUT(_type="file",_name="file")," ",T("and rename it:")," ", + INPUT(_type="text",_name="filename",requires=IS_NOT_EMPTY), + INPUT(_type="hidden",_name="location",_value=location), + INPUT(_type="hidden",_name="sender",_value=URL('design',args=app)), + INPUT(_type="submit",_value=T("upload")),_action=URL('upload_file')) + return form +def file_create_form(location): + form=FORM(T("create file with filename:")," ", + INPUT(_type="text",_name="filename",requires=IS_NOT_EMPTY), + INPUT(_type="hidden",_name="location",_value=location), + INPUT(_type="hidden",_name="sender",_value=URL('design',args=app)), + INPUT(_type="submit",_value=T("create")),_action=URL('create_file')) + return form +def upload_plugin_form(app): + form=FORM(T("upload plugin file:")," ", + INPUT(_type="file",_name="pluginfile"), + INPUT(_type="submit",_value=T("upload"))) + return form +def deletefile(arglist): + return A(TAG[''](IMG(_src=URL('static', 'images/delete_icon.png')), SPAN(T('Delete this file (you will be asked to confirm deletion)'))), _class='icon delete tooltip', _href=URL('delete',args=arglist,vars=dict(sender=request.function+'/'+app))) +}} + +{{block sectionclass}}design{{end}} + +

{{=T("Edit application")}} "{{=A(app,_href=URL(app,'default','index'),_target="_blank")}}"

+ + +
+

+ {{=searchbox('search')}} + {{=T("collapse/expand all")}} + + {{=button('#models', T("models"))}} + {{=button('#controllers', T("controllers"))}} + {{=button('#views', T("views"))}} + {{=button('#languages', T("languages"))}} + {{=button('#static', T("static"))}} + {{=button('#modules', T("modules"))}} + {{=button('#plugins', T("plugins"))}} + +

+
+ + + +

+ {{=T("Models")}} + {{=helpicon()}} {{=T("The data representation, define database tables and sets")}} +

+
+ {{if not models:}}

{{=T("There are no models")}}

{{else:}} +
+ {{=button(URL(a=app,c='appadmin',f='index'), T('database administration'))}} + {{if os.access(os.path.join(request.folder,'..',app,'databases','sql.log'),os.R_OK):}} + {{=button(URL('peek/%s/databases/sql.log'%app), 'sql.log')}} + {{pass}} +
+ {{pass}} + +
    + {{for m in models:}} +
  • + + {{=editfile('models',m)}} + {{=deletefile([app, 'models', m])}} + + + {{=peekfile('models',m)}} + + + {{if len(defines[m]):}}{{=T("defines tables")}} {{pass}}{{=XML(', '.join([B(table).xml() for table in defines[m]]))}} + +
    • + {{pass}} +
+
{{=file_create_form('%s/models/' % app)}}
+
+ + +{{ +controller_functions=[] +for c in controllers: controller_functions+=[c[:-3]+'/%s.html'%x for x in functions[c]] +}} + + + +

+ {{=T("Controllers")}} + {{=helpicon()}} {{=T("The application logic, each URL path is mapped in one exposed function in the controller")}} +

+
+ {{if not controllers:}}

{{=T("There are no controllers")}}

{{else:}} +
+ {{=button(URL(r=request,c='shell',f='index',args=app), T("shell"))}} + {{=button(URL('test',args=app), T("test"))}} + {{=button(URL('edit',args=[app,'cron','crontab']), T("crontab"))}} +
+ {{pass}} +
    + {{for c in controllers:}} +
  • + + {{=editfile('controllers',c)}} + {{=deletefile([app, 'controllers', c])}} + {{=testfile('controllers',c)}} + + + {{=peekfile('controllers',c)}} + + + {{if functions[c]:}}{{=T("exposes")}} {{pass}}{{=XML(', '.join([A(f,_href=URL(a=app,c=c[:-3],f=f)).xml() for f in functions[c]]))}} + +
    • + {{pass}} +
+
{{=file_create_form('%s/controllers/' % app)}}
+
+ + + +

+ {{=T("Views")}} + {{=helpicon()}} {{=T("The presentations layer, views are also known as templates")}} +

+
+
+ {{=button(LAYOUTS_APP, T("download layouts"))}} +
+ {{if not views:}}

{{=T("There are no views")}}

{{pass}} +
    + {{for c in views:}} +
  • + + {{=editfile('views',c)}} + {{=deletefile([app, 'views', c])}} + + + {{=peekfile('views',c)}} + + + {{if extend.has_key(c):}}{{=T("extends")}} {{=extend[c]}} {{pass}} + {{if include[c]:}}{{=T("includes")}} {{pass}}{{=XML(', '.join([B(f).xml() for f in include[c]]))}} + +
    • + {{pass}} +
+
{{=file_create_form('%s/views/' % app)}}
+
+ + + +

+ {{=T("Languages")}} + {{=helpicon()}} {{=T("Translation strings for the application")}} +

+
+
+ {{=button(URL('update_languages/'+app), T('update all languages'))}} +
+ {{if not languages:}}

{{=T("There are no translators, only default language is supported")}}

{{pass}} +
    + {{for file in languages:}} +
  • + + {{=editlanguagefile('languages',file)}} + {{=deletefile([app, 'languages', file])}} + + + {{=peekfile('languages',file)}} + +
    • + {{pass}} +
+
{{=file_create_form('%s/languages/' % app)}}{{=T('(something like "it-it")')}}
+
+ + + +

+ {{=T("Static files")}} + {{=helpicon()}} {{=T("These files are served without processing, your images go here")}} +

+
+
+
+ {{if not statics:}}

{{=T("There are no static files")}}

{{pass}} +
    + {{ + path=[] + for file in statics+['']: + items=file.split('/') + file_path=items[:-1] + filename=items[-1] + while path!=file_path: + if len(file_path)>=len(path) and all([v==file_path[k] for k,v in enumerate(path)]): + path.append(file_path[len(path)]) + thispath='static__'+'__'.join(path) + }} +
  • + {{=path[-1]}}/ +
    • + {{ + pass + pass + if filename: + }}
  • + + {{=editfile('static',file)}} {{=deletefile([app,'static',file])}} + + + {{=filename}} + +
    • {{ + pass + pass + }} + {{pass}} +
+
{{=file_create_form('%s/static/' % app)}} + {{=file_upload_form('%s/static/' % app)}}
+
+ + + +

+ {{=T("Modules")}} + {{=helpicon()}} {{=T("Additional code for your application")}} +

+
+
+
+ {{if not modules:}}

{{=T("There are no modules")}}

{{pass}} +
    + {{for m in modules:}} +
  • + + {{=editfile('modules',m)}} + {{if m!='__init__.py':}}{{=deletefile([app, 'modules', m])}}{{pass}} + + + {{=peekfile('modules',m)}} + +
    • + {{pass}} +
+
{{=file_create_form('%s/modules/' % app)}} + {{=file_upload_form('%s/modules/' % app)}}
+
+ + + +

+ {{=T("Plugins")}} + {{=helpicon()}} {{=T("To create a plugin, name a file/folder plugin_[name]")}} +

+
+
+ {{=button(PLUGINS_APP, T('download plugins'))}} +
+
+
+ {{if plugins:}} +
    + {{for plugin in plugins:}} +
  • + {{=A('plugin_%s' % plugin, _class='file', _href=URL('plugin', args=[app, plugin]))}} +
    • + {{pass}} +
+ {{else:}} +

{{=T('There are no plugins')}}

+ {{pass}} +
{{=upload_plugin_form(app)}}
+
+ + + ADDED applications/admin/views/default/downgrade_web2py.html Index: applications/admin/views/default/downgrade_web2py.html ================================================================== --- /dev/null +++ applications/admin/views/default/downgrade_web2py.html @@ -0,0 +1,13 @@ +{{extend 'layout.html'}} + +{{block sectionclass}}upgrade{{end}} + +

{{=T('web2py downgrade')}}

+ +

{{=T('ATTENTION:')}} {{=T('This is an experimental feature and it needs more testing. If you decide to downgrade you do it at your own risk')}}
+{{=T('If start the downgrade, be patient, it may take a while to rollback')}}

+ +
+{{=FORM(INPUT(_type='submit',_name='nodowngrade',_value=T('Cancel')), _class='inline')}} +{{=FORM(INPUT(_type='submit',_name='downgrade',_value=T('Downgrade')), _class='inline')}} +
ADDED applications/admin/views/default/edit.html Index: applications/admin/views/default/edit.html ================================================================== --- /dev/null +++ applications/admin/views/default/edit.html @@ -0,0 +1,92 @@ +{{extend 'layout.html'}} + +{{ + def shortcut(combo, description): + return XML('
  • %s %s
    • ' % (combo, description)) +}} + +{{if TEXT_EDITOR == 'amy':}} +{{include 'default/amy_ajax.html'}} +{{else:}} + + + +{{pass}} + +{{block sectionclass}}edit{{end}} + +

    {{=T('Editing file "%s"',filename)}}

    + +{{if functions:}} +

    + + {{=B(T('exposes:'))}}{{=XML(', '.join([A(f,_href=URL(a=app,c=controller,f=f)).xml() for f in functions]))}} + + {{if editviewlinks:}}
    + {{=B(T('edit views:'))}} + {{=XML(', '.join([v.xml() for v in editviewlinks]))}} + {{pass}} +

    +{{pass}} + +

    + {{=button(URL('design',args=request.args[0]), T('back'))}} + {{if edit_controller:}} + {{=button(edit_controller, T('edit controller'))}} + {{pass}} + {{if view_link:}} + {{=button(view_link, T('try view'))}} + {{pass}} + {{if request.args[1]=='models':}} + {{=T('online designer')}} + {{pass}} + {{=T('docs')}} +

    + +
    +
    + + {{=IMG(_src=URL('static', 'images/save_icon.png'), _alt=T('Save'))}} + + {{=T('Saved file hash:')}} + + {{=T('Last saved on:')}} + {{if TEXT_EDITOR=='amy':}} + + {{else:}} + + {{pass}} + {{=T('currently saved or')}} + {{=T('to previous version.')}} +
    +
    +
    + +{{if filetype=='html':}} +
    +

    Key bindings for ZenCoding Plugin

    +
      + {{=shortcut('Ctrl+S', 'Save via Ajax')}} + {{=shortcut('Ctrl+,', 'Expand Abbreviation')}} + {{=shortcut('Ctrl+M', 'Match Pair')}} + {{=shortcut('Ctrl+H', 'Wrap with Abbreviation')}} + {{=shortcut('Shift+Ctrl+M', 'Merge Lines')}} + {{=shortcut('Ctrl+Shift+←', 'Previous Edit Point')}} + {{=shortcut('Ctrl+Shift+→', 'Next Edit Point')}} + {{=shortcut('Ctrl+Shift+↑', 'Go to Matching Pair')}} +
    +
    +{{else:}} +
    +

    Key bindings

    +
      + {{=shortcut('Ctrl+S', 'Save via Ajax')}} +
    +
    +{{pass}} ADDED applications/admin/views/default/edit_language.html Index: applications/admin/views/default/edit_language.html ================================================================== --- /dev/null +++ applications/admin/views/default/edit_language.html @@ -0,0 +1,18 @@ +{{extend 'layout.html'}} + + +{{block sectionclass}}edit_language{{end}} + +

    {{=T('Editing Language file')}} "{{=filename}}"

    + +
    + {{=form}} +
    + ADDED applications/admin/views/default/index.html Index: applications/admin/views/default/index.html ================================================================== --- /dev/null +++ applications/admin/views/default/index.html @@ -0,0 +1,21 @@ +{{extend 'layout.html'}} + + +{{block sectionclass}}login{{end}} + +

    web2py™ {{=T('Web Framework')}}

    +

    {{=T('Login to the Administrative Interface')}}

    +

    {{=T('ATTENTION: Login requires a secure (HTTPS) connection or running on localhost.')}}

    +
    +
    +
    + + + +
    {{=T('Administrator Password:')}}
    +
    +
    ADDED applications/admin/views/default/peek.html Index: applications/admin/views/default/peek.html ================================================================== --- /dev/null +++ applications/admin/views/default/peek.html @@ -0,0 +1,16 @@ +{{extend 'layout.html'}} + +{{block sectionclass}}peek{{end}} + +

    {{=T("Peeking at file")}} "{{=filename}}"

    + +

    +{{=button(URL('design',args=request.args[0]), T('back'))}} +{{=button(URL('edit',args=request.args), T('edit'))}} +

    + +{{ +if filename[-3:]=='.py': language='python' +else: language='html' +}} +{{=CODE(data,language=language,link='/examples/global/vars/')}} ADDED applications/admin/views/default/plugin.html Index: applications/admin/views/default/plugin.html ================================================================== --- /dev/null +++ applications/admin/views/default/plugin.html @@ -0,0 +1,221 @@ +{{extend 'layout.html'}} +{{ +import os +def all(items): + return reduce(lambda a,b:a and b,items,True) +def peekfile(path,file): + return A(file.replace('\\\\','/'),_href=URL('peek', args=(app, path, file))) +def editfile(path,file): + return A(SPAN(T('edit')),_class='button editbutton',_href=URL('edit', args=(app, path, file))) +def testfile(path,file): + return A(TAG[''](IMG(_src=URL('static', 'images/test_icon.png'), _alt=T('test')), SPAN(T("Run tests in this file"))), _class='icon test tooltip',_href=URL('test', args=(app, file))) +def editlanguagefile(path,file): + return A(SPAN(T('edit')),_class='button editbutton',_href=URL('edit_language', args=(app, path, file))) +def file_upload_form(location): + form=FORM(T("upload file:")," ", + INPUT(_type="file",_name="file")," ",T("and rename it:")," ", + INPUT(_type="text",_name="filename",requires=IS_NOT_EMPTY), + INPUT(_type="hidden",_name="location",_value=location), + INPUT(_type="hidden",_name="sender",_value=URL('design/'+app)), + INPUT(_type="submit",_value=T("submit")),_action=URL('upload_file')) + return form +def file_create_form(location): + form=FORM(T("create file with filename:")," ", + INPUT(_type="text",_name="filename",requires=IS_NOT_EMPTY), + INPUT(_type="hidden",_name="location",_value=location), + INPUT(_type="hidden",_name="sender",_value=URL('design/'+app)), + INPUT(_type="submit",_value=T("submit")),_action=URL('create_file')) + return form +def upload_plugin_form(app): + form=FORM(T("upload plugin file:")," ", + INPUT(_type="file",_name="pluginfile"), + INPUT(_type="submit",_value=T("submit"))) + return form +def deletefile(arglist): + return A(TAG[''](IMG(_src=URL('static', 'images/delete_icon.png')), SPAN(T('Delete this file (you will be asked to confirm deletion)'))), _class='icon delete tooltip', _href=URL('delete',args=arglist,vars=dict(sender=request.function+'/'+app))) +}} + +{{block sectionclass}}plugin{{end}} + +

    + {{=T('Plugin "%s" in application', request.args(1))}} "{{=app}}" +

    +
    + {{=T("collapse/expand all")}} + + {{=button("#models", T("models"))}} + {{=button("#controllers", T("controllers"))}} + {{=button("#views", T("views"))}} + {{=button("#static", T("static"))}} + {{=button("#modules", T("modules"))}} + + + {{=sp_button(URL('design',args=app), T("back"))}} + {{=sp_button(URL('delete_plugin',args=request.args), T("delete plugin"))}} + {{=sp_button(URL('pack_plugin',args=request.args), T("pack plugin"))}} + +
    + + + +

    + {{=T("Models")}} +

    +
    + {{if not models:}} +

    {{=T("There are no models")}}

    + {{pass}} +
    +
    +
      + {{for m in models:}} +
    • + + {{=editfile('models',m)}} + {{=deletefile([app, 'models', m])}} + + + {{=peekfile('models',m)}} + + + {{if len(defines[m]):}}{{=T("defines tables")}} {{pass}}{{=XML(', '.join([B(table).xml() for table in defines[m]]))}} + +
      • + {{pass}} +
    +
    + + +{{ +controller_functions=[] +for c in controllers: controller_functions+=[c[:-3]+'/%s.html'%x for x in functions[c]] +}} + + + +

    + {{=T("Controllers")}} +

    +
    + {{if not controllers:}} +

    {{=T("There are no controllers")}}

    + {{pass}} +
    +
    +
      + {{for c in controllers:}} +
    • + + {{=editfile('controllers',c)}} + {{=deletefile([app,'controllers',c])}} + {{=testfile('controllers',c)}} + + + {{=peekfile('controllers',c)}} + + + {{if functions[c]:}}{{=T("exposes")}} {{pass}}{{=XML(', '.join([A(f,_href=URL(a=app,c=c[:-3],f=f)).xml() for f in functions[c]]))}} + +
      • + {{pass}} +
    +
    + + + +

    + {{=T("Views")}} +

    +
    + {{if not views:}} +

    {{=T("There are no views")}}

    + {{pass}} +
    +
    +
      + {{for c in views:}} +
    • + + {{=editfile('views',c)}} + {{=deletefile([app,'views',c])}} + + + {{=peekfile('views',c)}} + + + {{if extend.has_key(c):}}{{=T("extends")}} {{=extend[c]}} {{pass}} + {{if include[c]:}}{{=T("includes")}} {{pass}}{{=XML(', '.join([B(f).xml() for f in include[c]]))}} + +
      • + {{pass}} +
    +
    + + + +

    + {{=T("Static files")}} +

    +
    + {{if not statics:}}

    {{=T("There are no static files")}}

    {{pass}} +
      + {{ + path=[] + for file in statics+['']: + items=file.split('/') + file_path=items[:-1] + filename=items[-1] + while path!=file_path: + if len(file_path)>=len(path) and all([v==file_path[k] for k,v in enumerate(path)]): + path.append(file_path[len(path)]) + thispath='static__'+'__'.join(path) + }} +
    • + {{=path[-1]}}/ +
      • + {{ + pass + pass + if filename: + }}
    • + + {{=editfile('static',file)}} {{=deletefile([app,'static',file])}} + + + {{=filename}} + +
      • {{ + pass + pass + }} + {{pass}} +
    +
    + + + +

    + {{=T("Modules")}} +

    +
    + {{if not modules:}} +

    {{=T("There are no modules")}}

    + {{pass}} +
    +
    +
      + {{for m in modules:}} +
    • + {{=editfile('modules',m)}} + {{if m!='__init__.py':}}{{=T("delete")}}{{pass}} + {{=peekfile('modules',m)}} +
      • + {{pass}} +
    +
    + + ADDED applications/admin/views/default/resolve.html Index: applications/admin/views/default/resolve.html ================================================================== --- /dev/null +++ applications/admin/views/default/resolve.html @@ -0,0 +1,24 @@ +{{extend 'layout.html'}} + +{{block sectionclass}}resolve{{end}} + +

    {{=T('Resolve Conflict file')}} "{{=filename}}"

    + + + +
    + + + +
    + +
    +
    + {{=diff}} +
    +
    +
    ADDED applications/admin/views/default/site.html Index: applications/admin/views/default/site.html ================================================================== --- /dev/null +++ applications/admin/views/default/site.html @@ -0,0 +1,156 @@ +{{extend 'layout.html'}} +{{import os, glob}} + +{{block sectionclass}}site{{end}} + +
    +
    +

    {{=T("Installed applications")}}

    +
      + {{for a in apps:}} +
    • + {{if a==request.application:}} +

      {{=a}} ({{=T('currently running')}})

      +

      + {{else:}} +

      {{=A(a,_href=URL(a,'default','index'))}}

      + {{if MULTI_USER_MODE and db.app(name=a):}}(created by {{="%(first_name)s %(last_name)s" % db.auth_user[db.app(name=a).owner]}}){{pass}} +

      + {{if not os.path.exists('applications/%s/compiled' % a):}} + {{=sp_button(URL('design',args=a), T("edit"))}} + {{else:}} + {{=button(URL(a,'appadmin','index'), T("appadmin"))}} + {{pass}} + {{=button(URL('about',args=a), T("about"))}} + {{pass}} + {{=button(URL('errors',args=a), T("errors"))}} + {{=button(URL('cleanup',args=a), T("clean"))}} + {{=button(URL('pack',args=a), T("pack all"))}} + {{if not os.path.exists('applications/%s/compiled' % a):}} + {{=button(URL('compile_app',args=a), T("compile"))}} + {{else:}} + {{=button(URL('pack',args=(a, 'compiled')), T("pack compiled"))}} + {{if glob.glob('applications/%s/controllers/*.py' % a):}} + {{=button(URL('remove_compiled_app',args=a), T("remove compiled"))}} + {{pass}} + {{pass}} + {{if a!=request.application:}} + {{=button(URL('uninstall',args=a), T("uninstall"))}} + {{pass}} +

      +
      • + {{pass}} +
    +
    +
    + +
    +
    +
    + + {{if MULTI_USER_MODE:}} + {{=auth.navbar()}} + {{else:}} + {{=sp_button(URL('change_password'), T('change admin password'))}} + {{pass}} +
    + + {{if is_manager():}} +
    +

    {{=myversion}}

    + {{if session.check_version:}} +

    + {{=T('Checking for upgrades...')}} + {{session.check_version=False}} + {{else:}} +

    + {{=button("javascript:ajax('"+URL('check_version')+"',[],'check_version')", T('check for upgrades'))}} + {{pass}} +

    +
    + Running on {{=request.env.server_software}} +
    +
    + {{pass}} + +
    +

    {{=T("New application wizard")}}

    +

    {{=button(URL('wizard','index'), T('start wizard'))}} + {{=T("(requires internet access)")}}

    +
    + +
    +

    {{=T("New simple application")}}

    +
    +
    + {{=LABEL(T("Application name:"), _for="scaffold_filename")}} + + +
    + +
    +
    + +
    +

    {{=T("Upload & install packed application")}}

    +
    +
    + + + + + + + + + + + + + + + + + + + + + +
    + {{=LABEL(T("Application name:"), _form='upload_filename')}} + + +
    + {{=LABEL(T("Upload a package:"), _for='upload_file')}} + + + OR +
    + {{=LABEL(T("Use an url:"), _for='upload_url')}} + + +
    + + {{=LABEL(T("overwrite installed app"), _for='upload_overwrite')}} +
    + +
    +
    +
    +
    + +
    +

    {{=T("Deploy on Google App Engine")}}

    +

    {{=button(URL('gae','deploy'), T('deploy'))}}

    +

    + {{if TWITTER_HASH:}} +
    +

    {{=T("%s Recent Tweets"%TWITTER_HASH)}}

    +
    {{=T('loading...')}}
    + +
    + {{pass}} +
    +
    ADDED applications/admin/views/default/test.html Index: applications/admin/views/default/test.html ================================================================== --- /dev/null +++ applications/admin/views/default/test.html @@ -0,0 +1,20 @@ +{{extend 'layout.html'}} + +{{block sectionclass}}test{{end}} + +

    {{=T('Testing application')}} "{{=app}}"

    + +{{for controller in sorted(controllers):}} +
    +

    Testing controller "{{=controller}}"... please wait!

    +
    + + +{{pass}} + +

    {{=T("""If the report above contains a ticket number it indicates a failure in executing the controller, before any attempt to execute the doctests. This is usually due to an indentation error or an error outside function code. +A green title indicates that all tests (if defined) passed. In this case test results are not shown.""")}}

    +

    {{=T('Functions with no doctests will result in [passed] tests.')}}

    +

    {{=T('ATTENTION: TESTING IS NOT THREAD SAFE SO DO NOT PERFORM MULTIPLE TESTS CONCURRENTLY.')}}

    ADDED applications/admin/views/default/ticket.html Index: applications/admin/views/default/ticket.html ================================================================== --- /dev/null +++ applications/admin/views/default/ticket.html @@ -0,0 +1,132 @@ +{{extend 'layout.html'}} + +{{block sectionclass}}ticket{{end}} + +

    {{=T('Error ticket')}} for "{{=app}}"

    +

    {{=T('Ticket ID')}}

    +

    {{=ticket}}

    +{{if output:}}

    {{=output}}

    {{pass}} +

    {{=T('Version')}}

    + + + + + + + + + + + +
    web2py™{{=myversion}}
    Python{{=snapshot.get('pyver','')}}
    +

    {{=T('Traceback')}}

    +
    +{{=traceback}} +
    + +{{if snapshot:}} +{{try:}} + + + +

    + {{=T('Error snapshot')}} + {{=helpicon()}} {{=T('Detailed traceback description')}} +

    + + + +
    + +

    + {{=snapshot['etype']}}({{=snapshot['evalue']}}) +

    +

    + {{=T('inspect attributes')}} +

    +
    +
    +
    {{=T("Exception instance attributes")}}
    + + + {{for k,v in snapshot['exception'].items():}} + + + + + {{pass}} + +
    {{=k}}{{=v}}
    +
    +
    +
    + + +
    +

    {{=T('Frames')}}

    +
      + {{for i, frame in enumerate(snapshot['frames']):}} +
    • + {{is_hidden = (i != len(snapshot['frames'])-1 and 'hide' or 'inspect')}} +
      +

      + File {{="%s in %s at line %s" % (frame['file'], frame['func'], frame['lnum'])}} + {{=T("code")}} + {{=T("arguments")}} + {{=T("variables")}} +

      +
      +
      Function argument list
      +

      {{=frame['call']}}

      +
      +
      +
      Code listing
      + {{if frame['lines']:}} + 
      {{=CODE('\n'.join([x[1] for x in sorted(frame['lines'].items(),key=lambda x: x[0])]), 
+                    language='python', link=None, counter=min(frame['lines'].keys()), highlight_line=frame['lnum'])}}
      + {{pass}} +
      +
      +
      Variables
      + + + {{for k,v in frame['dump'].items():}} + + + + + {{pass}} + +
      {{=k}}{{=v}}
      +
      +
      +
      • + {{pass}} +
    +
    + + +
    +

    Context

    +

    + {{=T('locals')}} + {{=T('request')}} + {{=T('session')}} + {{=T('response')}} +

    +
    locals
    {{=BEAUTIFY(snapshot['locals'])}}
    +
    request
    {{=BEAUTIFY(snapshot['request'])}}
    +
    session
    {{=BEAUTIFY(snapshot['session'])}}
    +
    response
    {{=BEAUTIFY(snapshot['response'])}}
    +
    +{{except Exception, e:}} + + {{import traceback;tb=traceback.format_exc().replace("\n","\\n") }} + +{{pass}} +{{pass}} + +
    +

    In file: {{=layer}}

    + {{=CODE(code.replace('\r',''),language='python',link='/examples/global/vars/')}} +
    ADDED applications/admin/views/default/uninstall.html Index: applications/admin/views/default/uninstall.html ================================================================== --- /dev/null +++ applications/admin/views/default/uninstall.html @@ -0,0 +1,9 @@ +{{extend 'layout.html'}} + +
    +

    {{=T('Are you sure you want to uninstall application "%s"?', app)}}

    + + + +
    {{=FORM(INPUT(_type='submit',_name='nodelete',_value=T('Abort')))}}{{=FORM(INPUT(_type='submit',_name='delete',_value=T('Uninstall')))}}
    +
    ADDED applications/admin/views/default/upgrade_web2py.html Index: applications/admin/views/default/upgrade_web2py.html ================================================================== --- /dev/null +++ applications/admin/views/default/upgrade_web2py.html @@ -0,0 +1,13 @@ +{{extend 'layout.html'}} + +{{block sectionclass}}upgrade{{end}} + +

    {{=T('web2py upgrade')}}

    + +

    {{=T('ATTENTION:')}} {{=T('This is an experimental feature and it needs more testing. If you decide to upgrade you do it at your own risk')}}
    +{{=T('If start the upgrade, be patient, it may take a while to download')}}

    + +
    +{{=FORM(INPUT(_type='submit',_name='noupgrade',_value=T('Cancel')), _class='inline')}} +{{=FORM(INPUT(_type='submit',_name='upgrade',_value=T('Upgrade')), _class='inline')}} +
    ADDED applications/admin/views/default/user.html Index: applications/admin/views/default/user.html ================================================================== --- /dev/null +++ applications/admin/views/default/user.html @@ -0,0 +1,19 @@ +{{extend 'layout.html'}} +

    {{=T( request.args(0).replace('_',' ').capitalize() )}}

    +
    +{{=form}} +{{if request.args(0)=='login':}} +{{if not 'register' in auth.settings.actions_disabled:}} +
    register +{{pass}} +{{if not 'request_reset_password' in auth.settings.actions_disabled:}} +
    lost password +{{pass}} +{{pass}} +
    + + ADDED applications/admin/views/gae/deploy.html Index: applications/admin/views/gae/deploy.html ================================================================== --- /dev/null +++ applications/admin/views/gae/deploy.html @@ -0,0 +1,30 @@ +{{extend 'layout.html'}} + + + + + +

    Google App Engine Deployment Interface

    + +

    {{=T("This page can upload your application to the Google App Engine computing cloud. Mind that you must first create indexes locally and this is done by installing the Google appserver and running the app locally with it once, or there will be errors when selecting records. Attention: deployment may take long time, depending on the network speed. Attention: it will overwrite your app.yaml. DO NOT SUBMIT TWICE.")}}

    + +{{if command:}} +

    Command

    + +{{=CODE(command)}} +

    GAE Output

    +
    
+{{else:}}
+
    Deployment form
    
+
    
+{{=form}}
+
    
+{{pass}}

ADDED   applications/admin/views/generic.html
Index: applications/admin/views/generic.html
==================================================================
--- /dev/null
+++ applications/admin/views/generic.html
@@ -0,0 +1,18 @@
+{{extend 'layout.html'}}
+{{"""
+
+You should not modify this file. 
+It is used as default when a view is not provided for your controllers
+
+"""}}
+
+{{=BEAUTIFY(response._vars)}}
+
+
+
+
+
+
+
+
+

ADDED   applications/admin/views/layout.html
Index: applications/admin/views/layout.html
==================================================================
--- /dev/null
+++ applications/admin/views/layout.html
@@ -0,0 +1,44 @@
+
+
+    
+        
+        
+        {{=response.title or URL()}}
+        {{response.files.append(URL('static','css/styles.css'))}}
+        {{include 'web2py_ajax.html'}}
+        
+    
+    
+        
+        
    
+            
    
+                
    {{=response.flash or ''}}
    
+                {{include}}
+            
    
+        
    
+        
+    
+

ADDED   applications/admin/views/mercurial/commit.html
Index: applications/admin/views/mercurial/commit.html
==================================================================
--- /dev/null
+++ applications/admin/views/mercurial/commit.html
@@ -0,0 +1,33 @@
+{{extend 'layout.html'}}
+{{import time}}
+
+
    Mercurial Version Control System Interface
    
+for application "{{=request.args[0]}}"
    
+
+
    Commit form
    
+{{=form}}
+
+
+{{if repo['.'].rev()>=0:}}
+
    Last Revision
    
+
+
+
+
+
+
+
    Revision:{{=repo['.'].rev()}}
    Node:{{=repo['.']}}
    Created by:{{=repo['.'].user()}}
    Created on:{{=time.ctime(repo['.'].date()[0])}}
    Description:{{=repo['.'].description()}}
    
+
+
    Past revisions
    
+
    
+  {{=changes}}
+
    
+
+{{if files:}}
+
    Committed files
    
+
    
+{{=files}}
+
    
+{{pass}}
+
+{{pass}}

ADDED   applications/admin/views/mercurial/revision.html
Index: applications/admin/views/mercurial/revision.html
==================================================================
--- /dev/null
+++ applications/admin/views/mercurial/revision.html
@@ -0,0 +1,17 @@
+{{extend 'layout.html'}}
+
+
    Revision {{=rev}}
    
+
+{{=form}}
+
+

    
+
    Changelog
    
+
+{{=desc}}
+
+

    
+
    Files added
    
+
+{{=TABLE(*[TR(f) for f in files])}}
+
+

ADDED   applications/admin/views/shell/index.html
Index: applications/admin/views/shell/index.html
==================================================================
--- /dev/null
+++ applications/admin/views/shell/index.html
@@ -0,0 +1,162 @@
+{{extend 'layout.html'}}
+
+{{block sectionclass}}shell{{end}}
+
+
+
    
+  
+
+  
    
+    
    
+      
    >>>
    
+      
    
+        
+        Type some Python code in here and hit Return (Enter) to execute it.
+      
    
+    
    
+  
    
+
    
+
+
    
+  
      
+    
    • Using the shell may lock the database to other users of this app.
      • 
+    
    • Each db statement is automatically committed.
      • 
+    
    • Creating new tables dynamically is not allowed.
      • 
+    
    • Models are automatically imported in the shell.
      • 
+  
    
+
    
+
+

ADDED   applications/admin/views/toolbar/index.html
Index: applications/admin/views/toolbar/index.html
==================================================================
--- /dev/null
+++ applications/admin/views/toolbar/index.html
@@ -0,0 +1,17 @@
+
+  
+    {{response.files.append(URL('static','js/jquery.js'))}}
+    {{include 'web2py_ajax.html'}}
+    
+      
+    
    
+      URL: {{=URL(app,'default','index')}}
+      
+      
+    
    
+          
+  
+

ADDED   applications/admin/views/web2py_ajax.html
Index: applications/admin/views/web2py_ajax.html
==================================================================
--- /dev/null
+++ applications/admin/views/web2py_ajax.html
@@ -0,0 +1,27 @@
+{{
+response.files.insert(0,URL('static','js/jquery.js'))
+response.files.insert(1,URL('static','css/calendar.css'))
+response.files.insert(2,URL('static','js/calendar.js'))
+for _item in response.meta or []:}}
+     {{
+pass
+for _k,_file in enumerate(response.files or []):
+  if _file in response.files[:_k]:
+     continue
+  _file0=_file.lower().split('?')[0]
+  if _file0.endswith('.css'):}}
+     {{
+  elif _file0.endswith('.js'):}}
+     {{
+  pass
+pass
+}}
+
+    
+
+    

ADDED   applications/admin/views/wizard/generated.html
Index: applications/admin/views/wizard/generated.html
==================================================================
--- /dev/null
+++ applications/admin/views/wizard/generated.html
@@ -0,0 +1,13 @@
+{{extend 'layout.html'}}
+
+{{block sectionclass}}generated{{end}}
+
+Open new app in new window
+Back to wizard
+Admin design page
+{{if have_mercurial:}}
+Admin versioning page
+{{pass}}
+Database administration
+

    
+

ADDED   applications/admin/views/wizard/step.html
Index: applications/admin/views/wizard/step.html
==================================================================
--- /dev/null
+++ applications/admin/views/wizard/step.html
@@ -0,0 +1,140 @@
+{{extend 'layout.html'}}
+
+{{block sectionclass}}step{{end}}
+
+
    {{=T('New Application Wizard')}}
    
+
+
    
+{{if request.function=='index':}}
+  
    {{=T('Start a new app')}}
    
+{{else:}}
+  
    
+    
    {{=T('Basics')}}
    
+    
    {{=button(URL('index'), T('restart'))}}
    
+    
    App Name: {{=session.app['name']}}
    
+  
    
+  
    
+    
    Current settings
          
+    
    {{=button(URL('step1'), T('edit'))}}
    
+    
      
+    	{{for key,value in session.app['params']:}}
+    	
    • {{=key}}: {{=value}}
      • 
+    	{{pass}}
+    
    
+  
    
+  
    
+    
    Tables
    
+    
    {{=button(URL('step2'), T('edit all'))}}
    
+    
      
+    	{{for i,table in enumerate(session.app['tables']):}}
+    	
    • {{=button(URL('step3',args=i), T('edit'))}} {{=table}}
      • 
+    	{{pass}}
+    
    
+  
    
+  
    
+    
    Pages
    
+    
    {{=button(URL('step4'), T('edit all'))}}
    
+    
      
+      {{for i,page in enumerate(session.app['pages']):}}
+      
    • {{=button(URL('step5',args=i), T('edit'))}} {{=page}}
      • 
+      {{pass}}
+    
    
+  
    
+  
    
+    
    {{=T('Generate')}}
    
+    
    {{=button(URL('step6'), T('go!'))}}
    
+  
    
+{{pass}}
+
    
+
+
    
+
+  
+  
+  {{if 'step' in request.function:}}
+  
    {{=T('Step')}} {{=step}}
    
+  {{if request.function!='step1':}}
+  {{=button(URL('step' + str(int(request.function[-1])-1)), T('back'))}}
+  {{pass}}
+  {{else:}}
+  
    {{=T('Begin')}}
    
+  {{pass}}
+  {{if request.function in ('step1','step2','step3','step4','step5'):}}
+  {{=button(URL('step6'), T('skip to generate'))}}
+  {{pass}}
+  

    
+  {{if request.function in ('step1','step6'):}}
+  
+  {{pass}}
+  
    
+    {{=form}}
+  
    
+  
+  
+  
+  
    
+    
    Instructions
    
+    
    
+      {{if request.function=='index':}}
+      
      
+      	
    • Insert the name of a new app.
      • 
+      	
    • If the app exists and was created with the wizard, you will be able to edit it, but any manual editing to the app will be lost.
      • 
+      
    
+      {{elif request.function=='step1':}}
+      
      
+        
    • This Wizard will help you build a new web2py app.
      • 	
+      	
    • You can create an app with a name that already exists.
      • 
+      	
    • If you do not have an email server set email server to "logging".
      • 
+      	
    • If you want to use Janrain Engage for login: 1) Sign up for a Janrain Engage account; 2) Register you hostname, domain, and obtain an api key; 3) Set Login Config above to "domain:api_key".
      • 
+	
    • ATTENTION: you can use the wizard to download plugins BUT we cannot guarantee the stability or backward compatibility of plugins. Moreover plugins may conflict with each other. Anyway, we do recommend installing plugin "wiki" with adds CMS like capabilities to your app.
      • 
+      
    
+      {{elif request.function=='step2':}}
+      
      
+        
    • List the names of table that you need.
      • 
+      	
    • If you do not need authentication remove the table "auth_user".
      • 
+      	
    • Press enter to create a new input row.
      • 
+      	
    • Empty rows are ignored.
      • 
+      	
    • Other tables for role based access control will be created automatically, and do not need to be listed.
      • 
+        
    • You will be able to add fields later.
      • 	
+      
    
+      {{elif request.function=='step3':}}
+      
      
+      	
    • List the fields for this table (do not include an id field, it is automatic), for example "name unique" or "birthday date" or "image upload" or "comments multiple" or "description wiki required"
      • 
+      	
    • The first keyword(s) for each entry will be used to generate a name for the table field and its label. You can use spaces an other unicode characters.
      • 
+        
    • Keywords "string" (default), "text", "integer", "boolean", "float", "double", "file", "date", "time", "datetime", "file", "upload" will be used to determine the field type and they will not be made part of the field name.
+        
    • For a reference field use a field name, followed by the name of the referenced table.
      • 
+      	
    • Other special keywords are "required", "notnull" or "notempty", "unique". They map into equivalent validators but (at this time) should only be used with string and text types.
      • 
+      	
    • The keywords "html" and "wiki" force a text type and set a representation for the field value as sanitized HTML and MARKMIN resepectively.
      • 
+        
    • string, integer and reference fields can be "multiple", i.e. multiple values will be allowed
      • 
+      	
    • For the "auth_user" table do not add attributes to the default fields (username, first_name, last_name, password and email). They are handled automatically.
      • 
+        
    • Some fields will be added automatically upon creation and handled automatically: "created_by", "created_on", "modified_by", "modified_on", "active" (only active fields can be selected).
      • 
+        
    • For every table "table" another table "table_archive" is created and it contains the previous versions of each record. This is only accessible via appadmin or programmatically.
      •  
+      
    
+      {{elif request.function=='step4':}}
+      
      
+      	
    • List the names of the pages you want to create.
      • 
+        
    • Some pages are listed automatically because they expose Create/Read/Update/Delete for each tables you have created.
      • 
+        
    • All pages, except "error" and those with name starting in underscore willbe listed in the menu. You will be able to edit the menu later.
      • 
+        
    • You should have page "index", the starting point of your app, and page "error", where web2py will redirect to in case of error.
      • 
+            
    
+            {{elif request.function=='step5':}}
+            
      
+        
    • Use the markmin syntax to add text to your pages.
      • 
+            
    
+            {{elif request.function=='step6':}}
+            
      
+        
    • Almost done. Click on the button above to create your new app.
      • 
+        
    • Once done you will be able to edit it as any normal web2py app.
      • 
+      
    
+      {{pass}}
+    
    
+  
    
+
    
+

ADDED   applications/examples/ABOUT
Index: applications/examples/ABOUT
==================================================================
--- /dev/null
+++ applications/examples/ABOUT
@@ -0,0 +1,6 @@
+web2py is an open source full-stack framework for agile development 
+of secure database-driven web-based applications, written and programmable in 
+Python. 
+
+Created by Massimo Di Pierro 
+

ADDED   applications/examples/LICENSE
Index: applications/examples/LICENSE
==================================================================
--- /dev/null
+++ applications/examples/LICENSE
@@ -0,0 +1,137 @@
+## Web2py License
+
+Web2py is Licensed under the LGPL license version 3 
+(http://www.gnu.org/licenses/lgpl.html)
+
+Copyrighted (c) by Massimo Di Pierro (2007-2011)
+
+### On Commercial Redistribution
+
+In accordance with LGPL you may:
+- redistribute web2py with your apps (including official web2py binary versions)
+- release your applications which use official web2py libraries under any license you wish
+But you must:
+- make clear in the documentation that your application uses web2py
+- release any modification of the web2py libraries under the LGPLv3 license
+
+THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES 
+PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, 
+INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 
+FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE 
+PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL 
+NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT 
+HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, 
+BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL 
+DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED 
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES 
+OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER 
+PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+
+(Earlier versions of web2py, 1.0.*-1.90.*, were released under the GPL2 license plus a
+commercial exception which, for practical purposes, was very similar to the current LPGLv3)
+
+### Licenses for third party contributed software
+
+web2py contains third party software under the gluon/contrib/ folder.
+Each file/module in contrib is distributed with web2py under its original license.
+Here we list some of them.
+
+#### gluon.contrib.simplejson LICENSE
+
+Copyright (c) 2006 Bob Ippolito - Permission is hereby granted, free of charge, 
+to any person obtaining a copy of this software and associated documentation 
+files (the "Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish, distribute,
+sublicense, and/or sell copies of the Software, and to permit persons to whom 
+the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+
+#### gluon.contrib.rss2.py (originally PyRSS2Gen) LICENSE
+
+This is copyright (c) by Dalke Scientific Software, LLC and released under the
+BSD license.  See the file LICENSE in the distribution or 
+ for details.
+
+#### gluon.contrib.markdown (markdown2) LICENSE
+
+MIT License from from 
+
+#### gluon.contrib.feedparser LICENSE
+
+Copyright (c) 2002-2005, Mark Pilgrim
+
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without 
+modification, are permitted provided that the following conditions 
+are met:
+
+* Redistributions of source code must retain the above copyright notice,
+  this list of conditions and the following disclaimer.
+
+* Redistributions in binary form must reproduce the above copyright notice,
+  this list of conditions and the following disclaimer in the documentation
+  and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+#### gluon.wsgiserver.py LICENSE (borrowed from cherrypy)
+
+Copyright (c) 2004, CherryPy Team (team@cherrypy.org)
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    * Redistributions of source code must retain the above copyright notice, 
+      this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright notice, 
+      this list of conditions and the following disclaimer in the documentation 
+      and/or other materials provided with the distribution.
+    * Neither the name of the CherryPy Team nor the names of its contributors 
+      may be used to endorse or promote products derived from this software 
+      without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE 
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#### gluon.contrib.pam LICENSE
+
+Copyright (C) 2007-2009 Chris AtLee  Licensed under the MIT license
+
+#### gluon.contrib.shell LICENSE
+
+Copyright (C) by Google inc. Apache 2.0 Lincense
+
+#### The javascript licenses are in the code itself
+

ADDED   applications/examples/__init__.py
Index: applications/examples/__init__.py
==================================================================
--- /dev/null
+++ applications/examples/__init__.py

ADDED   applications/examples/controllers/ajax_examples.py
Index: applications/examples/controllers/ajax_examples.py
==================================================================
--- /dev/null
+++ applications/examples/controllers/ajax_examples.py
@@ -0,0 +1,26 @@
+
+
+
+
+def index():
+    return dict()
+
+
+def data():
+    if not session.m or len(session.m) == 10:
+        session.m = []
+    if request.vars.q:
+        session.m.append(request.vars.q)
+    session.m.sort()
+    return TABLE(*[TR(v) for v in session.m]).xml()
+
+
+def flash():
+    response.flash = 'this text should appear!'
+    return dict()
+
+
+def fade():
+    return dict()
+
+

ADDED   applications/examples/controllers/appadmin.py
Index: applications/examples/controllers/appadmin.py
==================================================================
--- /dev/null
+++ applications/examples/controllers/appadmin.py
@@ -0,0 +1,408 @@
+# -*- coding: utf-8 -*-
+
+# ##########################################################
+# ## make sure administrator is on localhost
+# ###########################################################
+
+import os
+import socket
+import datetime
+import copy
+import gluon.contenttype
+import gluon.fileutils
+
+# ## critical --- make a copy of the environment
+
+global_env = copy.copy(globals())
+global_env['datetime'] = datetime
+
+http_host = request.env.http_host.split(':')[0]
+remote_addr = request.env.remote_addr
+try:
+    hosts = (http_host, socket.gethostname(),
+             socket.gethostbyname(http_host),
+             '::1','127.0.0.1','::ffff:127.0.0.1')
+except:
+    hosts = (http_host, )
+
+if request.env.http_x_forwarded_for or request.env.wsgi_url_scheme\
+     in ['https', 'HTTPS']:
+    session.secure()
+elif (remote_addr not in hosts) and (remote_addr != "127.0.0.1"):
+    raise HTTP(200, T('appadmin is disabled because insecure channel'))
+
+if (request.application=='admin' and not session.authorized) or \
+        (request.application!='admin' and not gluon.fileutils.check_credentials(request)):
+    redirect(URL('admin', 'default', 'index'))
+
+ignore_rw = True
+response.view = 'appadmin.html'
+response.menu = [[T('design'), False, URL('admin', 'default', 'design',
+                 args=[request.application])], [T('db'), False,
+                 URL('index')], [T('state'), False,
+                 URL('state')], [T('cache'), False,
+                 URL('ccache')]]
+
+# ##########################################################
+# ## auxiliary functions
+# ###########################################################
+
+
+def get_databases(request):
+    dbs = {}
+    for (key, value) in global_env.items():
+        cond = False
+        try:
+            cond = isinstance(value, GQLDB)
+        except:
+            cond = isinstance(value, SQLDB)
+        if cond:
+            dbs[key] = value
+    return dbs
+
+
+databases = get_databases(None)
+
+
+def eval_in_global_env(text):
+    exec ('_ret=%s' % text, {}, global_env)
+    return global_env['_ret']
+
+
+def get_database(request):
+    if request.args and request.args[0] in databases:
+        return eval_in_global_env(request.args[0])
+    else:
+        session.flash = T('invalid request')
+        redirect(URL('index'))
+
+
+def get_table(request):
+    db = get_database(request)
+    if len(request.args) > 1 and request.args[1] in db.tables:
+        return (db, request.args[1])
+    else:
+        session.flash = T('invalid request')
+        redirect(URL('index'))
+
+
+def get_query(request):
+    try:
+        return eval_in_global_env(request.vars.query)
+    except Exception:
+        return None
+
+
+def query_by_table_type(tablename,db,request=request):
+    keyed = hasattr(db[tablename],'_primarykey')
+    if keyed:
+        firstkey = db[tablename][db[tablename]._primarykey[0]]
+        cond = '>0'
+        if firstkey.type in ['string', 'text']:
+            cond = '!=""'
+        qry = '%s.%s.%s%s' % (request.args[0], request.args[1], firstkey.name, cond)
+    else:
+        qry = '%s.%s.id>0' % tuple(request.args[:2])
+    return qry
+
+
+
+# ##########################################################
+# ## list all databases and tables
+# ###########################################################
+
+
+def index():
+    return dict(databases=databases)
+
+
+# ##########################################################
+# ## insert a new record
+# ###########################################################
+
+
+def insert():
+    (db, table) = get_table(request)
+    form = SQLFORM(db[table], ignore_rw=ignore_rw)
+    if form.accepts(request.vars, session):
+        response.flash = T('new record inserted')
+    return dict(form=form,table=db[table])
+
+
+# ##########################################################
+# ## list all records in table and insert new record
+# ###########################################################
+
+
+def download():
+    import os
+    db = get_database(request)
+    return response.download(request,db)
+
+def csv():
+    import gluon.contenttype
+    response.headers['Content-Type'] = \
+        gluon.contenttype.contenttype('.csv')
+    db = get_database(request)
+    query = get_query(request)
+    if not query:
+        return None
+    response.headers['Content-disposition'] = 'attachment; filename=%s_%s.csv'\
+         % tuple(request.vars.query.split('.')[:2])
+    return str(db(query).select())
+
+
+def import_csv(table, file):
+    table.import_from_csv_file(file)
+
+def select():
+    import re
+    db = get_database(request)
+    dbname = request.args[0]
+    regex = re.compile('(?P\w+)\.(?P\w+)=(?P\d+)')
+    if len(request.args)>1 and hasattr(db[request.args[1]],'_primarykey'):
+        regex = re.compile('(?P
    \w+)\.(?P\w+)=(?P.+)')
+    if request.vars.query:
+        match = regex.match(request.vars.query)
+        if match:
+            request.vars.query = '%s.%s.%s==%s' % (request.args[0],
+                    match.group('table'), match.group('field'),
+                    match.group('value'))
+    else:
+        request.vars.query = session.last_query
+    query = get_query(request)
+    if request.vars.start:
+        start = int(request.vars.start)
+    else:
+        start = 0
+    nrows = 0
+    stop = start + 100
+    table = None
+    rows = []
+    orderby = request.vars.orderby
+    if orderby:
+        orderby = dbname + '.' + orderby
+        if orderby == session.last_orderby:
+            if orderby[0] == '~':
+                orderby = orderby[1:]
+            else:
+                orderby = '~' + orderby
+    session.last_orderby = orderby
+    session.last_query = request.vars.query
+    form = FORM(TABLE(TR(T('Query:'), '', INPUT(_style='width:400px',
+                _name='query', _value=request.vars.query or '',
+                requires=IS_NOT_EMPTY(error_message=T("Cannot be empty")))), TR(T('Update:'),
+                INPUT(_name='update_check', _type='checkbox',
+                value=False), INPUT(_style='width:400px',
+                _name='update_fields', _value=request.vars.update_fields
+                 or '')), TR(T('Delete:'), INPUT(_name='delete_check',
+                _class='delete', _type='checkbox', value=False), ''),
+                TR('', '', INPUT(_type='submit', _value='submit'))),
+                _action=URL(r=request,args=request.args))
+    if request.vars.csvfile != None:
+        try:
+            import_csv(db[request.vars.table],
+                       request.vars.csvfile.file)
+            response.flash = T('data uploaded')
+        except Exception, e:
+            response.flash = DIV(T('unable to parse csv file'),PRE(str(e)))
+    if form.accepts(request.vars, formname=None):
+#         regex = re.compile(request.args[0] + '\.(?P
    \w+)\.id\>0')
+        regex = re.compile(request.args[0] + '\.(?P
    \w+)\..+')
+
+        match = regex.match(form.vars.query.strip())
+        if match:
+            table = match.group('table')
+        try:
+            nrows = db(query).count()
+            if form.vars.update_check and form.vars.update_fields:
+                db(query).update(**eval_in_global_env('dict(%s)'
+                                  % form.vars.update_fields))
+                response.flash = T('%s rows updated', nrows)
+            elif form.vars.delete_check:
+                db(query).delete()
+                response.flash = T('%s rows deleted', nrows)
+            nrows = db(query).count()
+            if orderby:
+                rows = db(query).select(limitby=(start, stop),
+                        orderby=eval_in_global_env(orderby))
+            else:
+                rows = db(query).select(limitby=(start, stop))
+        except Exception, e:
+            (rows, nrows) = ([], 0)
+            response.flash = DIV(T('Invalid Query'),PRE(str(e)))
+    return dict(
+        form=form,
+        table=table,
+        start=start,
+        stop=stop,
+        nrows=nrows,
+        rows=rows,
+        query=request.vars.query,
+        )
+
+
+# ##########################################################
+# ## edit delete one record
+# ###########################################################
+
+
+def update():
+    (db, table) = get_table(request)
+    keyed = hasattr(db[table],'_primarykey')
+    record = None
+    if keyed:
+        key = [f for f in request.vars if f in db[table]._primarykey]
+        if key:
+            record = db(db[table][key[0]] == request.vars[key[0]]).select().first()
+    else:
+        record = db(db[table].id == request.args(2)).select().first()
+
+    if not record:
+        qry = query_by_table_type(table, db)
+        session.flash = T('record does not exist')
+        redirect(URL('select', args=request.args[:1],
+                     vars=dict(query=qry)))
+
+    if keyed:
+        for k in db[table]._primarykey:
+            db[table][k].writable=False
+
+    form = SQLFORM(db[table], record, deletable=True, delete_label=T('Check to delete'),
+                   ignore_rw=ignore_rw and not keyed,
+                   linkto=URL('select',
+                   args=request.args[:1]), upload=URL(r=request,
+                   f='download', args=request.args[:1]))
+
+    if form.accepts(request.vars, session):
+        session.flash = T('done!')
+        qry = query_by_table_type(table, db)
+        redirect(URL('select', args=request.args[:1],
+                 vars=dict(query=qry)))
+    return dict(form=form,table=db[table])
+
+
+# ##########################################################
+# ## get global variables
+# ###########################################################
+
+
+def state():
+    return dict()
+
+def ccache():
+    form = FORM(
+        P(TAG.BUTTON("Clear CACHE?", _type="submit", _name="yes", _value="yes")),
+        P(TAG.BUTTON("Clear RAM", _type="submit", _name="ram", _value="ram")),
+        P(TAG.BUTTON("Clear DISK", _type="submit", _name="disk", _value="disk")),
+    )
+
+    if form.accepts(request.vars, session):
+        clear_ram = False
+        clear_disk = False
+        session.flash = ""
+        if request.vars.yes:
+            clear_ram = clear_disk = True
+        if request.vars.ram:
+            clear_ram = True
+        if request.vars.disk:
+            clear_disk = True
+
+        if clear_ram:
+            cache.ram.clear()
+            session.flash += "Ram Cleared "
+        if clear_disk:
+            cache.disk.clear()
+            session.flash += "Disk Cleared"
+
+        redirect(URL(r=request))
+
+    try:
+        from guppy import hpy; hp=hpy()
+    except ImportError:
+        hp = False
+
+    import shelve, os, copy, time, math
+    from gluon import portalocker
+
+    ram = {
+        'bytes': 0,
+        'objects': 0,
+        'hits': 0,
+        'misses': 0,
+        'ratio': 0,
+        'oldest': time.time()
+    }
+    disk = copy.copy(ram)
+    total = copy.copy(ram)
+
+    for key, value in cache.ram.storage.items():
+        if isinstance(value, dict):
+            ram['hits'] = value['hit_total'] - value['misses']
+            ram['misses'] = value['misses']
+            try:
+                ram['ratio'] = ram['hits'] * 100 / value['hit_total']
+            except (KeyError, ZeroDivisionError):
+                ram['ratio'] = 0
+        else:
+            if hp:
+                ram['bytes'] += hp.iso(value[1]).size
+                ram['objects'] += hp.iso(value[1]).count
+
+                if value[0] < ram['oldest']:
+                    ram['oldest'] = value[0]
+
+    locker = open(os.path.join(request.folder,
+                                        'cache/cache.lock'), 'a')
+    portalocker.lock(locker, portalocker.LOCK_EX)
+    disk_storage = shelve.open(os.path.join(request.folder, 'cache/cache.shelve'))
+    try:
+        for key, value in disk_storage.items():
+            if isinstance(value, dict):
+                disk['hits'] = value['hit_total'] - value['misses']
+                disk['misses'] = value['misses']
+                try:
+                    disk['ratio'] = disk['hits'] * 100 / value['hit_total']
+                except (KeyError, ZeroDivisionError):
+                    disk['ratio'] = 0
+            else:
+                if hp:
+                    disk['bytes'] += hp.iso(value[1]).size
+                    disk['objects'] += hp.iso(value[1]).count
+                    if value[0] < disk['oldest']:
+                        disk['oldest'] = value[0]
+    finally:
+        portalocker.unlock(locker)
+        locker.close()
+        disk_storage.close()
+
+    total['bytes'] = ram['bytes'] + disk['bytes']
+    total['objects'] = ram['objects'] + disk['objects']
+    total['hits'] = ram['hits'] + disk['hits']
+    total['misses'] = ram['misses'] + disk['misses']
+    try:
+        total['ratio'] = total['hits'] * 100 / (total['hits'] + total['misses'])
+    except (KeyError, ZeroDivisionError):
+        total['ratio'] = 0
+
+    if disk['oldest'] < ram['oldest']:
+        total['oldest'] = disk['oldest']
+    else:
+        total['oldest'] = ram['oldest']
+
+    def GetInHMS(seconds):
+        hours = math.floor(seconds / 3600)
+        seconds -= hours * 3600
+        minutes = math.floor(seconds / 60)
+        seconds -= minutes * 60
+        seconds = math.floor(seconds)
+
+        return (hours, minutes, seconds)
+
+    ram['oldest'] = GetInHMS(time.time() - ram['oldest'])
+    disk['oldest'] = GetInHMS(time.time() - disk['oldest'])
+    total['oldest'] = GetInHMS(time.time() - total['oldest'])
+
+    return dict(form=form, total=total,
+                ram=ram, disk=disk)
+

ADDED   applications/examples/controllers/database_examples.py
Index: applications/examples/controllers/database_examples.py
==================================================================
--- /dev/null
+++ applications/examples/controllers/database_examples.py
@@ -0,0 +1,152 @@
+from gluon.fileutils import read_file
+
+response.menu = [['Register User', False, URL(r=request,
+                 f='register_user')], ['Register Dog', False,
+                 URL('register_dog')], ['Register Product'
+                 , False, URL('register_product')],
+                 ['Buy product', False, URL('buy')]]
+
+
+def register_user():
+    """ simple user registration form with validation and database.insert()
+        also lists all records currently in the table"""
+
+    # ## create an insert form from the table
+
+    form = SQLFORM(db.users)
+
+    # ## if form correct perform the insert
+
+    if form.accepts(request.vars, session):
+        response.flash = 'new record inserted'
+
+    # ## and get a list of all users
+
+    records = SQLTABLE(db().select(db.users.ALL))
+    return dict(form=form, records=records)
+
+
+def register_dog():
+    """ simple user registration form with validation and database.insert()
+        also lists all records currently in the table"""
+
+    form = SQLFORM(db.dogs)
+    if form.accepts(request.vars, session):
+        response.flash = 'new record inserted'
+    download = URL('download')  # to see the picture
+    records = SQLTABLE(db().select(db.dogs.ALL), upload=download)
+    return dict(form=form, records=records)
+
+
+def register_product():
+    """ simple user registration form with validation and database.insert()
+        also lists all records currently in the table"""
+
+    form = SQLFORM(db.products)
+    if form.accepts(request.vars, session):
+        response.flash = 'new record inserted'
+    records = SQLTABLE(db().select(db.products.ALL))
+    return dict(form=form, records=records)
+
+
+def buy():
+    """ uses a form to query who is buying what. validates form and
+        updates existing record or inserts new record in purchases """
+
+    buyerRecords = db().select(db.users.ALL)
+    buyerOptions = []
+    for row in buyerRecords:
+        buyerOptions.append(OPTION(row.name, _value=row.id))
+
+    productRecords = db().select(db.products.ALL)
+    productOptions = []
+    for row in productRecords:
+        productOptions.append(OPTION(row.name, _value=row.id))
+
+    form = FORM(TABLE(
+                TR('Buyer id:',
+                    SELECT(buyerOptions,_name='buyer_id')),
+                TR('Product id:',
+                    SELECT(productOptions,_name='product_id')),
+                TR('Quantity:',
+                    INPUT(_type='text', _name='quantity',
+                          requires=IS_INT_IN_RANGE(1, 100))),
+                TR('',
+                    INPUT(_type='submit', _value='Order'))
+                ))
+    if form.accepts(request.vars, session, keepvalues=True):
+
+        # ## check if user is in the database
+
+        if len(db(db.users.id == form.vars.buyer_id).select()) == 0:
+            form.errors.buyer_id = 'buyer not in database'
+
+        # ## check if product is the database
+
+        if len(db(db.products.id == form.vars.product_id).select())\
+             == 0:
+            form.errors.product_id = 'product not in database'
+
+        # ## if no errors
+
+        if len(form.errors) == 0:
+
+            # ## get a list of same purchases by same user
+
+            purchases = db((db.purchases.buyer_id == form.vars.buyer_id)
+                            & (db.purchases.product_id
+                            == form.vars.product_id)).select()
+
+            # ## if list contains a record, update that record
+
+            if len(purchases) > 0:
+                purchases[0].update_record(quantity=purchases[0].quantity
+                         + form.vars.quantity)
+            else:
+
+            # ## or insert a new record in table
+                db.purchases.insert(buyer_id=form.vars.buyer_id,
+                                    product_id=form.vars.product_id,
+                                    quantity=form.vars.quantity)
+            response.flash = 'product purchased!'
+    if len(form.errors):
+        response.flash = 'invalid values in form!'
+
+    # ## now get a list of all purchases
+
+    # quick fix to make it runnable on gae
+    if purchased:
+        records = db(purchased).select(db.users.name,
+                                       db.purchases.quantity,
+                                       db.products.name)
+    else:
+        records = db().select(db.purchases.ALL)
+    return dict(form=form, records=SQLTABLE(records), vars=form.vars,
+                vars2=request.vars)
+
+
+def delete_purchased():
+    """ delete all records in purchases """
+
+    db(db.purchases.id > 0).delete()
+    redirect(URL('buy'))
+
+
+def reset_purchased():
+    """ set quantity=0 for all records in purchases """
+
+    db(db.purchases.id > 0).update(quantity=0)
+    redirect(URL('buy'))
+
+
+def download():
+    """ used to download uploaded files """
+
+    import gluon.contenttype
+    app = request.application
+    filename = request.args[0]
+    response.headers['Content-Type'] = \
+        gluon.contenttype.contenttype(filename)
+    return read_file('applications/%s/uploads/%s' % (app, filename), 'rb')
+
+

ADDED   applications/examples/controllers/default.py
Index: applications/examples/controllers/default.py
==================================================================
--- /dev/null
+++ applications/examples/controllers/default.py
@@ -0,0 +1,69 @@
+# -*- coding: utf-8 -*-
+
+from gluon.fileutils import read_file
+
+response.title = T('web2py Web Framework')
+response.keywords = T('web2py, Python, Web Framework')
+response.description = T('web2py Web Framework')
+
+session.forget()
+
+@cache('index')
+def index():
+    return response.render()
+
+@cache('what')
+def what():
+    return response.render()
+
+@cache('download')
+def download():
+    return response.render()
+
+@cache('who')
+def who():
+    return response.render()
+
+@cache('support')
+def support():
+    return response.render()
+
+@cache('documentation')
+def documentation():
+    return response.render()
+
+@cache('usergroups')
+def usergroups():
+    return response.render()
+
+def contact():
+    redirect(URL('default','usergroups'))
+
+@cache('videos')
+def videos():
+    return response.render()
+
+def security():
+    redirect('http://www.web2py.com/book/default/chapter/01#security')
+
+def api():
+    redirect('http://web2py.com/book/default/chapter/04#API')
+
+@cache('license')
+def license():
+    import os
+    filename = os.path.join(request.env.gluon_parent, 'LICENSE')
+    return response.render(dict(license=MARKMIN(read_file(filename))))
+
+def version():
+    return request.env.web2py_version
+
+@cache('examples')
+def examples():
+    return response.render()
+
+@cache('changelog')
+def changelog():
+    import os
+    filename = os.path.join(request.env.gluon_parent, 'README')
+    return response.render(dict(changelog=MARKMIN(read_file(filename))))

ADDED   applications/examples/controllers/form_examples.py
Index: applications/examples/controllers/form_examples.py
==================================================================
--- /dev/null
+++ applications/examples/controllers/form_examples.py
@@ -0,0 +1,27 @@
+
+
+
+def form():
+    """ a simple entry form with various types of objects """
+
+    form = FORM(TABLE(
+        TR('Your name:', INPUT(_type='text', _name='name',
+           requires=IS_NOT_EMPTY())),
+        TR('Your email:', INPUT(_type='text', _name='email',
+           requires=IS_EMAIL())),
+        TR('Admin', INPUT(_type='checkbox', _name='admin')),
+        TR('Sure?', SELECT('yes', 'no', _name='sure',
+           requires=IS_IN_SET(['yes', 'no']))),
+        TR('Profile', TEXTAREA(_name='profile',
+           value='write something here')),
+        TR('', INPUT(_type='submit', _value='SUBMIT')),
+        ))
+    if form.accepts(request.vars, session):
+        response.flash = 'form accepted'
+    elif form.errors:
+        response.flash = 'form is invalid'
+    else:
+        response.flash = 'please fill the form'
+    return dict(form=form, vars=form.vars)
+
+

ADDED   applications/examples/controllers/global.py
Index: applications/examples/controllers/global.py
==================================================================
--- /dev/null
+++ applications/examples/controllers/global.py
@@ -0,0 +1,81 @@
+
+session.forget()
+
+response.menu = [['home', False, '/%s/default/index'
+                  % request.application], ['docs', True,
+                 '/%s/global/vars' % request.application]]
+
+
+def vars():
+    """the running controller function!"""
+
+    if not request.args:
+        (
+            doc,
+            keys,
+            t,
+            c,
+            d,
+            value,
+            ) = (
+            'Global variables',
+            globals(),
+            None,
+            None,
+            (),
+            None,
+            )
+        (title, args) = ('globals()', '')
+    elif len(request.args) < 3:
+        args = '.'.join(request.args)
+        try:
+            doc = eval(args + '.__doc__')
+        except:
+            doc = 'no documentation'
+        try:
+            keys = eval('dir(%s)' % args)
+        except:
+            keys = []
+        t = eval('type(%s)' % args)
+        try:
+            c = eval('%s.__class__' % args)
+        except:
+            c = None
+        try:
+            d = eval('%s.__bases__' % args)
+        except:
+            d = None
+        title = args
+        args += '.'
+    else:
+        raise HTTP(400)
+    attributes = {}
+    for key in keys:
+        a = args + key
+        if eval('isinstance(%s,SQLDB)' % a) or a == 'vars':
+            continue
+        try:
+            doc1 = eval(a + '.__doc__')
+        except:
+            doc1 = 'no documentation'
+        t1 = eval('type(%s)' % a)
+        try:
+            c1 = eval('%s.__class__' % a)
+        except:
+            c1 = None
+        try:
+            d1 = eval('%s.__bases__' % a)
+        except:
+            d1 = ()
+        attributes[a] = (doc1, t1, c1, d1)
+    return dict(
+        title=title,
+        args=args,
+        t=t,
+        c=c,
+        d=d,
+        doc=doc,
+        attributes=attributes,
+        )
+
+

ADDED   applications/examples/controllers/layout_examples.py
Index: applications/examples/controllers/layout_examples.py
==================================================================
--- /dev/null
+++ applications/examples/controllers/layout_examples.py
@@ -0,0 +1,27 @@
+
+
+
+def civilized():
+    response.menu = [['civilized', True, URL('civilized'
+                     )], ['slick', False, URL('slick')],
+                     ['basic', False, URL('basic')]]
+    response.flash = 'you clicked on civilized'
+    return dict(message='you clicked on civilized')
+
+
+def slick():
+    response.menu = [['civilized', False, URL('civilized'
+                     )], ['slick', True, URL('slick')],
+                     ['basic', False, URL('basic')]]
+    response.flash = 'you clicked on slick'
+    return dict(message='you clicked on slick')
+
+
+def basic():
+    response.menu = [['civilized', False, URL('civilized'
+                     )], ['slick', False, URL('slick')],
+                     ['basic', True, URL('basic')]]
+    response.flash = 'you clicked on basic'
+    return dict(message='you clicked on basic')
+
+

ADDED   applications/examples/controllers/session_examples.py
Index: applications/examples/controllers/session_examples.py
==================================================================
--- /dev/null
+++ applications/examples/controllers/session_examples.py
@@ -0,0 +1,12 @@
+
+
+
+def counter():
+    """ every time you reload, it increases the session.counter """
+
+    if not session.counter:
+        session.counter = 0
+    session.counter += 1
+    return dict(counter=session.counter)
+
+

ADDED   applications/examples/controllers/simple_examples.py
Index: applications/examples/controllers/simple_examples.py
==================================================================
--- /dev/null
+++ applications/examples/controllers/simple_examples.py
@@ -0,0 +1,140 @@
+def hello1():
+    """ simple page without template """
+
+    return 'Hello World'
+
+
+def hello2():
+    """ simple page without template but with internationalization """
+
+    return T('Hello World')
+
+
+def hello3():
+    """ page rendered by template simple_examples/index3.html or generic.html"""
+
+    return dict(message='Hello World')
+
+
+def hello4():
+    """ page rendered by template simple_examples/index3.html or generic.html"""
+
+    response.view = 'simple_examples/hello3.html'
+    return dict(message=T('Hello World'))
+
+
+def hello5():
+    """ generates full page in controller """
+
+    return HTML(BODY(H1(T('Hello World'), _style='color: red;'))).xml()  # .xml to serialize
+
+
+def hello6():
+    """ page rendered with a flash"""
+
+    response.flash = 'Hello World in a flash!'
+    return dict(message=T('Hello World'))
+
+
+def status():
+    """ page that shows internal status"""
+    response.view = 'generic.html'
+    return dict(request=request, session=session, response=response)
+
+
+def redirectme():
+    """ redirects to /{{=request.application}}/{{=request.controller}}/hello3 """
+
+    redirect(URL('hello3'))
+
+
+def raisehttp():
+    """ returns an HTTP 400 ERROR page """
+
+    raise HTTP(400, 'internal error')
+
+
+def raiseexception():
+    """ generates an exeption, logs the event and returns a ticket number """
+
+    1 / 0
+    return 'oops'
+
+
+def servejs():
+    """ serves a js document """
+
+    import gluon.contenttype
+    response.headers['Content-Type'] = \
+        gluon.contenttype.contenttype('.js')
+    return 'alert("This is a Javascript document, it is not supposed to run!");'
+
+
+def makejson():
+    import gluon.contrib.simplejson as sj
+    return sj.dumps(['foo', {'bar': ('baz', None, 1.0, 2)}])
+
+
+def makertf():
+    import gluon.contrib.pyrtf as q
+    doc = q.Document()
+    section = q.Section()
+    doc.Sections.append(section)
+    section.append('Section Title')
+    section.append('web2py is great. ' * 100)
+    response.headers['Content-Type'] = 'text/rtf'
+    return q.dumps(doc)
+
+
+def rss_aggregator():
+    import datetime
+    import gluon.contrib.rss2 as rss2
+    import gluon.contrib.feedparser as feedparser
+    d = feedparser.parse('http://rss.slashdot.org/Slashdot/slashdot/to')
+
+    rss = rss2.RSS2(title=d.channel.title, link=d.channel.link,
+                    description=d.channel.description,
+                    lastBuildDate=datetime.datetime.now(),
+                    items=[rss2.RSSItem(title=entry.title,
+                    link=entry.link, description=entry.description,
+                    pubDate=datetime.datetime.now()) for entry in
+                    d.entries])
+    response.headers['Content-Type'] = 'application/rss+xml'
+    return rss2.dumps(rss)
+
+
+
+def ajaxwiki():
+    default="""
+# section
+
+## subsection
+
+### sub subsection
+
+- **bold** text
+- ''italic''
+- [[link http://google.com]]
+
+``
+def index: return 'hello world'
+``
+
+-----------
+Quoted text
+-----------
+
+---------
+0 | 0 | 1
+0 | 2 | 0
+3 | 0 | 0
+---------
+"""
+    form = FORM(TEXTAREA(_id='text',_name='text',value=default),
+                INPUT(_type='button',
+                      _value='markmin',
+                      _onclick="ajax('ajaxwiki_onclick',['text'],'html')"))
+    return dict(form=form, html=DIV(_id='html'))
+
+def ajaxwiki_onclick():
+    return MARKMIN(request.vars.text).xml()

ADDED   applications/examples/controllers/spreadsheet.py
Index: applications/examples/controllers/spreadsheet.py
==================================================================
--- /dev/null
+++ applications/examples/controllers/spreadsheet.py
@@ -0,0 +1,9 @@
+from gluon.contrib.spreadsheet import Sheet
+
+def callback():
+    return cache.ram('sheet1',lambda:None,None).process(request)
+
+def index():
+    sheet = cache.ram('sheet1',lambda:Sheet(10,10,URL('callback')),0)
+    #sheet.cell('r0c3',value='=r0c0+r0c1+r0c2',readonly=True)
+    return dict(sheet=sheet)

ADDED   applications/examples/controllers/template_examples.py
Index: applications/examples/controllers/template_examples.py
==================================================================
--- /dev/null
+++ applications/examples/controllers/template_examples.py
@@ -0,0 +1,35 @@
+
+
+
+def variables():
+    return dict(a=10, b=20)
+
+
+def test_for():
+    return dict()
+
+
+def test_if():
+    return dict()
+
+
+def test_try():
+    return dict()
+
+
+def test_def():
+    return dict()
+
+
+def escape():
+    return dict(message='
    text is scaped
    ')
+
+
+def xml():
+    return dict(message=XML('
    text is not escaped
    '))
+
+
+def beautify():
+    return dict(message=BEAUTIFY(request))
+
+

ADDED   applications/examples/models/db.py
Index: applications/examples/models/db.py
==================================================================
--- /dev/null
+++ applications/examples/models/db.py
@@ -0,0 +1,69 @@
+#########################################################################
+## This scaffolding model makes your app work on Google App Engine too
+#########################################################################
+
+if request.controller.endswith('_examples'): response.generic_patterns.append('*')
+
+from gluon.settings import settings
+
+# if running on Google App Engine
+if settings.web2py_runtime_gae:
+    from gluon.contrib.gql import *
+    # connect to Google BigTable
+    db = DAL('gae')
+    # and store sessions there
+    session.connect(request, response, db=db)
+else:
+    # if not, use SQLite or other DB
+    db = DAL('sqlite://storage.sqlite')
+
+db.define_table(
+    'users',
+    Field('name'),
+    Field('email')
+    )
+
+# ONE (users) TO MANY (dogs)
+
+db.define_table(
+    'dogs',
+    Field('owner_id', db.users),
+    Field('name'),
+    Field('type'),
+    Field('vaccinated', 'boolean', default=False),
+    Field('picture', 'upload', default=''),
+    )
+
+db.define_table(
+    'products',
+    Field('name'),
+    Field('description', 'text')
+    )
+
+# MANY (users) TO MANY (purchases)
+
+db.define_table(
+    'purchases',
+    Field('buyer_id', db.users),
+    Field('product_id', db.products),
+    Field('quantity', 'integer')
+    )
+
+# if running on Google App Engine
+if settings.web2py_runtime_gae:
+    # quick hack to skip the join
+    purchased = None
+else:
+    # use a joined view
+    purchased = (db.users.id == db.purchases.buyer_id) & (db.products.id
+                 == db.purchases.product_id)
+
+db.users.name.requires = IS_NOT_EMPTY()
+db.users.email.requires = [IS_EMAIL(), IS_NOT_IN_DB(db, 'users.email')]
+db.dogs.owner_id.requires = IS_IN_DB(db, 'users.id', 'users.name')
+db.dogs.name.requires = IS_NOT_EMPTY()
+db.dogs.type.requires = IS_IN_SET(['small', 'medium', 'large'])
+db.purchases.buyer_id.requires = IS_IN_DB(db, 'users.id', 'users.name')
+db.purchases.product_id.requires = IS_IN_DB(db, 'products.id',
+        'products.name')
+db.purchases.quantity.requires = IS_INT_IN_RANGE(0, 10)

ADDED   applications/examples/models/feeds_reader.py
Index: applications/examples/models/feeds_reader.py
==================================================================
--- /dev/null
+++ applications/examples/models/feeds_reader.py
@@ -0,0 +1,48 @@
+
+def group_feed_reader(group,mode='div',counter='5'):
+    """parse group feeds"""
+
+    url = "http://groups.google.com/group/%s/feed/rss_v2_0_topics.xml?num=%s" %\
+          (group,counter)
+    from gluon.contrib import feedparser
+    g = feedparser.parse(url)
+
+    if mode == 'div':
+        html = XML(TAG.BLOCKQUOTE(UL(*[LI(A(entry['title']+' - ' +\
+                                 entry['author'][entry['author'].rfind('('):],\
+                                 _href=entry['link'],_target='_blank'))\
+                            for entry in g['entries'] ]),\
+                       _class="boxInfo",\
+                       _style="padding-bottom:5px;"))
+
+    else:
+        html = XML(UL(*[LI(A(entry['title']+' - ' +\
+                             entry['author'][entry['author'].rfind('('):],\
+                             _href=entry['link'],_target='_blank'))\
+                            for entry in g['entries'] ]))
+
+    return html
+
+
+def code_feed_reader(project,mode='div'):
+    """parse code feeds"""
+
+    url = "http://code.google.com/feeds/p/%s/hgchanges/basic" % project
+    from gluon.contrib import feedparser
+    g = feedparser.parse(url)
+    if mode == 'div':
+        html = XML(DIV(UL(*[LI(A(entry['title'],_href=entry['link'],\
+                                 _target='_blank'))\
+                            for entry in g['entries'][0:5]]),\
+                       _class="boxInfo",\
+                       _style="padding-bottom:5px;"))
+    else:
+        html = XML(UL(*[LI(A(entry['title'],_href=entry['link'],\
+                             _target='_blank'))\
+                            for entry in g['entries'][0:5]]))
+
+
+    return html
+
+
+

ADDED   applications/examples/models/markmin.py
Index: applications/examples/models/markmin.py
==================================================================
--- /dev/null
+++ applications/examples/models/markmin.py
@@ -0,0 +1,37 @@
+import gluon.template
+
+markmin_dict = dict(template=lambda \
+                    code:gluon.template.render(code,context=globals()),
+                    sup=lambda \
+                        code:'%s'%code,
+                    br=lambda n:'
    '*int(n),
+                    groupdates=lambda group:group_feed_reader(group),
+                    )
+
+def get_content(b=None,\
+                c=request.controller,\
+                f=request.function,\
+                l='en',\
+                format='markmin'):
+    """Gets and renders the file in
+    /private/content////.
+    """
+
+    def openfile():
+        import os
+        path = os.path.join(request.folder,'private','content',l,c,f,b+'.'+format)
+        return open(path)
+
+    try:
+        openedfile = openfile()
+    except Exception, IOError:
+        l='en'
+        openedfile = openfile()
+
+    if format == 'markmin':
+        html = MARKMIN(str(T(openedfile.read())),markmin_dict)
+    else:
+        html = str(T(openedfile.read()))
+    openedfile.close()
+
+    return html

ADDED   applications/examples/models/menu.py
Index: applications/examples/models/menu.py
==================================================================
--- /dev/null
+++ applications/examples/models/menu.py
@@ -0,0 +1,36 @@
+# -*- coding: utf-8 -*-
+
+#########################################################################
+## Changes the menu active item
+#########################################################################
+def toggle_menuclass(cssclass='pressed',menuid='headermenu'):
+    """This function changes the menu class to put pressed appearance"""
+
+    positions = dict(
+                           index='',
+                           what='-108px -115px',
+                           download='-211px -115px',
+                           who='-315px -115px',
+                           support='-418px -115px',
+                           documentation='-520px -115px'
+                           )
+
+
+    if request.function in positions.keys():
+            jscript = """
+            
+            """ % dict(cssclass=cssclass,
+                            menuid=menuid,
+                            function=request.function,
+                            cssposition=positions[request.function]
+                            )
+
+            return XML(jscript)
+    else:
+        return ''

ADDED   applications/examples/private/content/en/default/documentation/community.markmin
Index: applications/examples/private/content/en/default/documentation/community.markmin
==================================================================
--- /dev/null
+++ applications/examples/private/content/en/default/documentation/community.markmin
@@ -0,0 +1,9 @@
+### Community sources
+
+#### Sites
+- [[web2pyslices (recipes) http://web2pyslices.com popup]]
+- [[web2py utils documentation http://packages.python.org/web2py_utils/ popup]]
+- [[web2pybrasil http://www.web2pybrasil.com.br popup]]   
+- Apostila em português [[Download http://dl.dropbox.com/u/830444/apostila_web2py_basico.pdf popup]] e [[Online http://web2pybrasil.appspot.com/init/plugin_wiki/page/curso-web2py-000 popup]]
+- [[Sitio en español http://www.web2py.com.ar popup]]
+- [[Documentación en español http://www.web2py.com.ar/examples/default/docs popup]]

ADDED   applications/examples/private/content/en/default/documentation/main.markmin
Index: applications/examples/private/content/en/default/documentation/main.markmin
==================================================================
--- /dev/null
+++ applications/examples/private/content/en/default/documentation/main.markmin
@@ -0,0 +1,4 @@
+## web2py``TM``:sup Documentation
+
+Here is listed knows sources of documentation on web2py
+you can submit your own source [[here contact]]

ADDED   applications/examples/private/content/en/default/documentation/more.markmin
Index: applications/examples/private/content/en/default/documentation/more.markmin
==================================================================
--- /dev/null
+++ applications/examples/private/content/en/default/documentation/more.markmin
@@ -0,0 +1,10 @@
+### More resources
+
+- [[videos http://www.web2py.com/examples/default/videos/ popup]]
+- [[Quick Examples http://web2py.com/examples/default/examples popup]]
+- [[FAQ http://www.web2py.com/AlterEgo popup]]
+- [[Appliances http://web2py.com/appliances popup]]
+- [[User Voice http://web2py.uservoice.com/ popup]]
+- [[web2py utils http://packages.python.org/web2py_utils/ popup]]
+- [[Layouts http://web2py.com/layouts popup]]
+- [[Plugins http://web2py.com/plugins popup]]

ADDED   applications/examples/private/content/en/default/documentation/official.markmin
Index: applications/examples/private/content/en/default/documentation/official.markmin
==================================================================
--- /dev/null
+++ applications/examples/private/content/en/default/documentation/official.markmin
@@ -0,0 +1,8 @@
+### Official documentation
+
+#### Books
+- [[**web2py full/free online book (english)** http://web2py.com/book popup]]
+- [[web2py book (spanish) http://www.latinuxpress.com/books/drafts/web2py/ popup]]
+- [[buy e-book/printed version http://stores.lulu.com/web2py popup]]
+- [[Epydoc http://www.web2py.com/examples/static/epydoc/index.html popup]]
+- [[API http://web2py.com/book/default/chapter/04#API popup]]

ADDED   applications/examples/private/content/en/default/index/maincontent.markmin
Index: applications/examples/private/content/en/default/index/maincontent.markmin
==================================================================
--- /dev/null
+++ applications/examples/private/content/en/default/index/maincontent.markmin
@@ -0,0 +1,2 @@
+## web2py``TM``:sup Web Framework
+Free open source full-stack framework for rapid development of fast, scalable, [[secure http://www.web2py.com/book/default/chapter/01#security popup]] and portable database-driven web-based applications. Written and programmable in [[Python http://www.python.org popup]]. [[LGPLv3 License http://www.gnu.org/licenses/lgpl.html]]

ADDED   applications/examples/private/content/en/default/index/whyweb2py.markmin
Index: applications/examples/private/content/en/default/index/whyweb2py.markmin
==================================================================
--- /dev/null
+++ applications/examples/private/content/en/default/index/whyweb2py.markmin
@@ -0,0 +1,12 @@
+### Why web2py?
+
+- **Created by a community of professionals** and University professors in Computer Science and Software Engineering.
+- **Always backward compatible.** We have not broken backward compatibility since version 1.0 in 2007, and we pledge not to break it in the future.
+- **Easy to run.** It requires no installation and no configuration.
+- **Runs on** Windows, Mac, Unix/Linux, Google App Engine, Amazon EC2, and almost any web hosting via Python 2.5/2.6/2.7, or Java with Jython.
+- **Runs with** Apache, Lighttpd, Cherokee and almost any other web server via CGI, FastCGI, WSGI, mod_proxy, and/or mod_python. It can embed third party WSGI apps and middleware.
+- **Talks to** SQLite, PostgreSQL, MySQL, MSSQL, FireBird, Oracle, IBM DB2, Informix, Ingres, and Google App Engine. 
+- **Secure** [[It prevents the most common types of vulnerabilities http://web2py.com/examples/default/security]] including Cross Site Scripting, Injection Flaws, and Malicious File Execution.
+- **Enforces good Software Engineering practices** (Model-View-Controller design, Server-side form validation, postbacks) that make the code more readable, scalable, and maintainable.
+- **Speaks multiple protocols** HTML/XML, RSS/ATOM, RTF, PDF, JSON, AJAX, XML-RPC, CSV, REST, WIKI, Flash/AMF, and Linked Data (RDF). 
+- **Includes** a SSL-enabled and streaming-capable web server, a relational database, a web-based integrated development environment and web-based management interface, a Database Abstraction Layer that writes SQL for you in real time, internationalization support, multiple authentication methods, role based access control, an error logging and ticketing system, multiple caching methods for scalability, the jQuery library for AJAX and effects. [[Read more... http://web2py.com/examples/default/what]]

ADDED   applications/examples/private/content/en/default/usergroups/grouplist.markmin
Index: applications/examples/private/content/en/default/usergroups/grouplist.markmin
==================================================================
--- /dev/null
+++ applications/examples/private/content/en/default/usergroups/grouplist.markmin
@@ -0,0 +1,42 @@
+# web2py usergroups
+
+You can submit a new group to be listed [[here contact]]
+## International Group (English)
+
+Main group managed by Massimo Di Pierro
+
+- [[http://groups.google.com/group/web2py/ http://groups.google.com/group/web2py/ popup]]
+
+``web2py``:groupdates
+
+## Brazilian Group
+
+Portuguese speakers group
+
+- [[http://groups.google.com/group/web2py-users-brazil http://groups.google.com/group/web2py-users-brazil popup]]
+
+``web2py-users-brazil``:groupdates
+
+## Spanish Group
+
+Spanish speakers group
+
+- [[http://groups.google.com/group/web2py-usuarios http://groups.google.com/group/web2py-usuarios popup]]
+
+``web2py-usuarios``:groupdates
+
+## Japanese Group
+
+Japanese speakers group
+
+- [[http://groups.google.com/group/web2py-japan http://groups.google.com/group/web2py-japan popup]]
+
+``web2py-japan``:groupdates
+
+## French Group
+
+French speakers group
+
+- [[http://groups.google.com/group/web2py-fr http://groups.google.com/group/web2py-fr popup]]
+
+``web2py-fr``:groupdates

ADDED   applications/examples/static/artwork.tar.gz
Index: applications/examples/static/artwork.tar.gz
==================================================================
--- /dev/null
+++ applications/examples/static/artwork.tar.gz
cannot compute difference between binary files

ADDED   applications/examples/static/bg.gif
Index: applications/examples/static/bg.gif
==================================================================
--- /dev/null
+++ applications/examples/static/bg.gif
cannot compute difference between binary files

ADDED   applications/examples/static/bg.png
Index: applications/examples/static/bg.png
==================================================================
--- /dev/null
+++ applications/examples/static/bg.png
cannot compute difference between binary files

ADDED   applications/examples/static/css/artwork.css
Index: applications/examples/static/css/artwork.css
==================================================================
--- /dev/null
+++ applications/examples/static/css/artwork.css
@@ -0,0 +1,141 @@
+
+/*---------------------------------- ARTWORK E STICKERS -----------------------------------------*/
+/*logo*/
+.logosDow{
+	border-width: 1px;
+	border-style: solid;
+	border-color:#CCC;
+	border-radius:3px;
+	background-color:#FFF;
+	-webkit-border-radius: 3px;
+	-moz-border-radius:3px;
+	margin:20px auto;
+	background: -moz-linear-gradient(top, #fbfbfb, #f1f1f1) repeat-X;
+	background: -webkit-gradient(linear, left top, left bottom, from(#fbfbfb), to(#f1f1f1)) repeat-X;
+	-ms-filter: "progid:DXImageTransform.Microsoft.gradient(startColorstr=#666, endColorstr=#FFFFFFFF)";
+	filter: progid:DXImageTransform.Microsoft.gradient(startColorstr=#fbfbfb, endColorstr=#f1f1f1);
+	border-width: 1px;
+	border-style: solid;
+	border-color:#CCC;
+	border-radius:3px;
+	background-color:#FFF;
+	-webkit-border-radius: 3px;
+	-moz-border-radius:3px;
+	width:100%;
+	
+	padding:10px 10px 0 10px;
+	padding-bottom:0
+	}
+.WH1{
+	height:190px;
+	}	
+.WH2{
+	height:90px;
+	
+	}		
+.logosDow span{
+	margin:8px 15px;
+	float:left;
+	width:700px; height:20px;
+	color:#555555;
+	font:bold 18px/30px Arial,Helvetica,sans-serif;
+	letter-spacing:-1px;
+}
+.box-A{
+	margin:10px;	
+	float:left;
+	border-width: 1px;
+	border-style: solid;
+	border-color:#CCC;
+	border-radius:3px;
+	background-color:#FFF;
+	-webkit-border-radius: 3px;
+	-moz-border-radius:3px;
+	width:250px; height:130px;
+}
+a.box-A span{
+	display:none;
+	position:relative;
+        top:-55px;
+	left:-10px;
+	width:235px;
+	height:50px;
+	background-image:url(../img/tipDownloads2.png);
+	background-position:center;
+	background-repeat:no-repeat;
+}
+a.box-A:hover span{ 
+	display:block;
+}
+.logoDow1{
+	background-image:url(../img/logo3Tones.png);
+	background-repeat:no-repeat;
+	background-position:-10px -155px;
+}
+.logoDow2{
+	background-image:url(../img/logo3Tones.png);
+	background-repeat:no-repeat;
+	background-position:-10px 0px;
+}
+.logoDow3{
+	background-image:url(../img/logo3Tones.png);
+	background-repeat:no-repeat;
+	background-position:-10px -312px;
+}
+/*fim logo*/
+/*Stick*/
+.stikImage{
+	float:left;
+	width:100px;
+	height:50px;
+	margin-left:15px;
+	background-repeat:no-repeat;
+	background-position:center;
+	
+	}
+.stikimage1{
+	background-image:url(../img/Stickers1.png);
+	background-position:center;
+}
+.stikimage2{
+	background-image:url(../img/Stickers2.png);
+	background-position:center;
+}
+.stikimage3{
+	background-image:url(../img/Stickers3.png);
+	background-position:center;
+}
+.stikimage4{
+	background-image:url(../img/Stickers8.png);
+	background-position:center;
+}
+.stikimage5{
+	background-image:url(../img/Stickers5.png);
+	background-position:center;
+}
+.stikimage6{
+	background-image:url(../img/Stickers6.png);
+	background-position:center;
+}
+.stikimage7{
+	background-image:url(../img/Stickers7.png);
+	background-position:center;
+}
+a.stikImage span{
+     display:none;
+	position:relative;
+    top:-50px;
+	left:-50px;
+	width:180px;
+	height:50px;
+	background-image:url(../img/tipDownloads.png);
+	background-position:center;
+	background-repeat:no-repeat;
+}
+a.stikImage:hover span{ 
+	display:block;
+}
+/*fim do Stick*/
+
+/*------------------------------ FIM ARTWORK E STICKERS -----------------------------------------*/
+

ADDED   applications/examples/static/css/calendar.css
Index: applications/examples/static/css/calendar.css
==================================================================
--- /dev/null
+++ applications/examples/static/css/calendar.css
@@ -0,0 +1,4 @@
+.calendar{z-index:99;position:relative;display:none;border-top:2px solid #fff;border-right:2px solid #000;border-bottom:2px solid #000;border-left:2px solid #fff;font-size:11px;color:#000;cursor:default;background:#d4d0c8;font-family:tahoma,verdana,sans-serif;}.calendar table{border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;font-size:11px;color:#000;cursor:default;background:#d4d0c8;font-family:tahoma,verdana,sans-serif;}.calendar .button{text-align:center;padding:1px;border-top:1px solid #fff;border-right:1px solid #000;border-bottom:1px solid #000;border-left:1px solid #fff;}.calendar .nav{background:transparent}.calendar thead .title{font-weight:bold;padding:1px;border:1px solid #000;background:#848078;color:#fff;text-align:center;}.calendar thead .name{border-bottom:1px solid #000;padding:2px;text-align:center;background:#f4f0e8;}.calendar thead .weekend{color:#f00;}.calendar thead .hilite{border-top:2px solid #fff;border-right:2px solid #000;border-bottom:2px solid #000;border-left:2px solid #fff;padding:0;background-color:#e4e0d8;}.calendar thead .active{padding:2px 0 0 2px;border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;background-color:#c4c0b8;}.calendar tbody .day{width:2em;text-align:right;padding:2px 4px 2px 2px;}.calendar tbody .day.othermonth{font-size:80%;color:#aaa;}.calendar tbody .day.othermonth.oweekend{color:#faa;}.calendar table .wn{padding:2px 3px 2px 2px;border-right:1px solid #000;background:#f4f0e8;}.calendar tbody .rowhilite td{background:#e4e0d8;}.calendar tbody .rowhilite td.wn{background:#d4d0c8;}.calendar tbody td.hilite{padding:1px 3px 1px 1px;border-top:1px solid #fff;border-right:1px solid #000;border-bottom:1px solid #000;border-left:1px solid #fff;}.calendar tbody td.active{padding:2px 2px 0 2px;border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;}.calendar tbody td.selected{font-weight:bold;border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;padding:2px 2px 0 2px;background:#e4e0d8;}.calendar tbody td.weekend{color:#f00;}.calendar tbody td.today{font-weight:bold;color:#00f;}.calendar tbody .disabled{color:#999;}.calendar tbody .emptycell{visibility:hidden;}.calendar tbody .emptyrow{display:none;}.calendar tfoot .ttip{background:#f4f0e8;padding:1px;border:1px solid #000;background:#848078;color:#fff;text-align:center;}.calendar tfoot .hilite{border-top:1px solid #fff;border-right:1px solid #000;border-bottom:1px solid #000;border-left:1px solid #fff;padding:1px;background:#e4e0d8;}.calendar tfoot .active{padding:2px 0 0 2px;border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;}.calendar .combo{position:absolute;display:none;width:4em;top:0;left:0;cursor:default;border-top:1px solid #fff;border-right:1px solid #000;border-bottom:1px solid #000;border-left:1px solid #fff;background:#e4e0d8;font-size:90%;padding:1px;z-index:100;}.calendar .combo .label,.calendar .combo .label-IEfix{text-align:center;padding:1px;}.calendar .combo .label-IEfix{width:4em;}.calendar .combo .active{background:#c4c0b8;padding:0;border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;}.calendar .combo .hilite{background:#048;color:#fea;}.calendar td.time{border-top:1px solid #000;padding:1px 0;text-align:center;background-color:#f4f0e8;}.calendar td.time .hour,.calendar td.time .minute,.calendar td.time .ampm{padding:0 3px 0 4px;border:1px solid #889;font-weight:bold;background-color:#fff;}.calendar td.time .ampm{text-align:center;}.calendar td.time .colon{padding:0 2px 0 3px;font-weight:bold;}.calendar td.time span.hilite{border-color:#000;background-color:#766;color:#fff;}.calendar td.time span.active{border-color:#f00;background-color:#000;color:#0f0;}
+
+#CP_hourcont {z-index:99;padding: 0px;position:absolute;border:1px dashed #bbbbbb;background-color:#dddddd;display:none;} #CP_minutecont {z-index:99;background-color:#dddddd;padding: 0px;position:absolute;width:45px;border: 1px dashed #cccccc;display:none;} .floatleft {float:left;} .CP_hour {z-index:99;padding:1px;font-family: Arial, Helvetica, sans-serif;font-size:9px;white-space:nowrap;cursor:pointer;width:35px;margin:1px;background-color:#eeeeee;} .CP_minute {z-index:99;padding:1px;background-color:#eeeeee;font-family: Arial, Helvetica, sans-serif;font-size:9px;white-space:nowrap;cursor:pointer;width:auto;margin:1px;} .CP_over {z-index:99;background-color:#ffffff;}
+

ADDED   applications/examples/static/css/home.css
Index: applications/examples/static/css/home.css
==================================================================
--- /dev/null
+++ applications/examples/static/css/home.css
@@ -0,0 +1,637 @@
+* {	
+	margin:0;
+	padding:0;
+	}
+		
+html, body {
+	height:100%;
+	background-color:#FFF;/*#f1f6f2;*/
+	min-width:1020px;
+	font-size:14px;
+	/*font-family:Candara, Verdana, Arial, sans-serif;*/
+	font-family:Helvetica,"Helvetica Neue",Arial,sans-serif;
+	}
+
+h1,h2,h3,h4,h5,h6 {
+	font-family: Helvetica,"Helvetica Neue",Arial,sans-serif; //'Garamond','Georgia',serif;
+	margin:15px 0 10px;
+	padding:0;
+	color: #678A86;
+	
+	}
+	
+th, th {vertical-align:top}	
+
+li {
+	padding-bottom:5px;
+	}
+	
+a {
+	color: #832D20; //#732F2C;
+	text-decoration:none;
+	}
+		
+a:hover {
+	text-shadow:0 1px 0 #FFF;
+	text-decoration:underline;
+	}	
+			
+	
+p { 
+	border-bottom: 10px solid transparent; 
+	color:#383838;
+	font-size:14px;
+	line-height:24px;
+	}	
+
+pre {
+	font-family:'Consolas','Menlo','Deja Vu Sans Mono','Bitstream Vera Sans Mono',monospace !important;
+	}
+
+
+.general {
+	min-height:100%;
+	position:relative;
+	width:100%;
+	}
+	
+#font1 {
+	font-weight:bold;
+	font-size:12px;
+	font-family:Candara, Verdana, Arial, sans-serif;
+	line-height:19px;
+	color:#a7b6b5;
+	text-shadow:0 1px 0 #000;
+	}
+
+ 
+/****************************   HEADER   ************************************/
+.headerExt{
+	top:0;
+	width:100%;
+	height:130px;
+	margin:0px auto;
+	background-image:url(../img/back-02.png);
+	background-repeat:repeat-x;
+	background-position:0px -57px;
+	z-index:99;
+	}
+
+.headerInt{
+	position:relative;
+	width:982px;
+	height:130px;
+	margin:0px auto 0px auto;
+	}
+
+.boxLogin{
+	float:right;
+	margin:8px 50px 0px 0px;
+	}
+	
+.logo{
+	position:absolute;	
+	background-image:url(../img/web2py_logo.png);
+	background-position:16px  2px 0px 0px;
+	background-repeat:no-repeat;
+	width:230px;
+	height:50px;
+	top:33px;
+	left:45px;
+	}
+	
+ 
+/*****************************  MAIN CONTENT ********************************/
+.content {
+	width:982px;
+	margin:0 auto;
+	overflow:hidden;
+	padding-bottom:100px;
+	}
+	
+.onecolcontent {
+    color:#383838;
+    font-size:14px;
+    line-height:24px;
+	width:850px;
+	margin:0 auto;
+	height:auto;
+	}	
+	
+.contentleft {
+    color:#383838;
+    font-size:14px;
+    line-height:24px;
+	float:left;
+	width:650px;
+	height:auto;
+	}
+		
+.contentright {
+	color:#383838;
+    font-size:14px;
+    line-height:24px;
+	float:right;
+	width:300px;
+	height:auto;
+	}		
+	
+/************************** FOOTER ******************************************/
+
+.footerExt{
+	background-image:url(../img/back-R-02.png); 
+	background-repeat:repeat-x ;
+	background-position:0px -15px;
+	height:100px;
+	position:absolute;
+	bottom:0;
+	width:100%;
+	overflow:hidden;
+
+	}	
+	
+.footerInt{
+	position:relative;
+	width:982px;
+	height:70px;
+	margin:30px auto 0 auto;
+	}	
+		
+.Boxfooter1{
+	position:absolute;
+	bottom:0px;
+	left:30px;
+	top:5px;
+	}
+	
+.Boxfooter2{
+	position:absolute;
+	left:130px;
+	top:5px;
+	}
+	
+.Boxfooter3{
+	position:absolute;
+	right:0;
+	top:2px;
+	}	
+	
+a.Boxfooter4{
+	background-image:url(../img/1283522094_email.png);
+	background-position:center;
+	background-repeat:no-repeat;
+	position:absolute;
+	left:32px;
+	top:36px;
+	width:40px;
+	height:32px;
+	}	
+	
+a.Boxfooter5{
+	background-image:url(../img/1283522082_phone.png);
+	background-position:center;
+	background-repeat:no-repeat;
+	position:absolute;
+	left:131px;
+	top:32px;
+	width:40px;
+	height:32px;
+	}	
+	
+.Boxfooter6{
+    background-image:url(../img/Stickers4.png);
+	background-position:center;
+	background-repeat:no-repeat;
+	position:absolute;
+	left:840px;
+	top:24px;
+	width:135px;
+	height:44px;
+	}
+	
+.Boxfooter7{
+	position:absolute;
+	left:745px;
+	top:45px;
+	width:115px;
+	height:24px;
+	font-weight:bold;
+	font-size:12px;
+	font-family:Candara, Verdana, Arial, sans-serif;
+	font-style:italic;
+	line-height:19px;
+	color:#1B211F;
+	text-shadow:0 1px 0 #778E88;
+	}
+		
+
+/******************************  LINKS   ************************************/
+a.login{
+	font-weight:bold;
+	font-size:12px;
+	font-family:Candara, Verdana, Arial, sans-serif;
+	line-height:19px;
+	text-decoration:none;
+	color:#a7b6b5;
+	text-shadow:0 1px 0 #000;
+	}
+	
+a.login:hover{
+	color:#1B211F;
+	text-shadow:0 1px 0 #778E88;
+	}
+		
+a.login:visited{
+	color:#1B211F;
+	text-shadow:0 1px 0 #778E88;
+	}
+
+
+
+/********************DOWNLOAD****************************************/			
+.boxBtDownload{
+	width:240px;
+	height:57px;
+	position:relative;  
+	margin:20px auto;
+	z-index:0;
+	}
+.boxBtDownloadICO{
+	width:40px;
+	height:40px;
+	float:right;
+	margin:6px 10px;
+	background-image:url(../img/netdow2.png);/*Download Icon 1 2 3 */
+	background-position:center;
+	background-repeat:no-repeat;
+}	
+#textBtDownload1{
+	font-weight:bold;
+	font-size:26px;
+	font-family:Georgia,Palatino,"Palatino Linotype",Times,"Times New Roman",serif;
+	font-style:italic;
+	line-height:19px;
+	color:#1B211F;
+	text-shadow:0 1px 0 #b5b5b5;
+	text-decoration:none;
+	position:absolute;
+	left:35px;
+	top:15px;
+    }
+#textBtDownload2{
+	font-weight:bold;
+	font-size:12px;
+	font-family:Georgia,Palatino,"Palatino Linotype",Times,"Times New Roman",serif;
+	font-style:italic;
+	line-height:19px;
+    color:#747474;
+	text-shadow:0 1px 0 #FFFFFF;
+	text-decoration:none;
+	position:absolute;
+	left:18px;
+	top:34px;
+    }	
+a.btDownload{
+	position:absolute;
+
+    border-width: 1px;
+	border-style: solid;
+	border-color:#939593;
+	-moz-background-clip:border;
+	-moz-background-inline-policy:continuous;
+	-moz-background-origin:padding;
+	border-radius:5px;
+	-webkit-border-radius: 5px;
+	-moz-border-radius:5px;
+	background-image:url(../img/back-03.png);
+	background-position:bottom;
+	background-repeat:repeat-x; 
+	text-decoration:none;
+
+	}
+.btDownloadPosicao1{
+	width:240px;
+	height:57px;
+	}	
+.btDownloadPosicao2{
+	width:250px;
+	height:57px;
+	}	
+a.btDownload:hover {
+	background-image:url(../img/back-05.png);
+	}	
+		
+.downloadb  li a {
+	-moz-background-clip:border;
+	-moz-background-inline-policy:continuous;
+	-moz-background-origin:padding;
+	border-radius:5px;
+	-webkit-border-radius: 5px;
+	-moz-border-radius:5px;
+	color:#1B211F;
+	display:block;
+	font-size:93%;
+	margin:0;
+	padding:6% 40px 6% 6%;
+	line-height: 16px;
+	border-width: 1px;
+	border-style: solid;
+	border-color:#939593;
+	background-image:url(../img/back-03.png);
+	background-position:bottom;
+	background-repeat:repeat-x; 
+	text-decoration:none;
+	
+	}
+	
+.downloadb li a:hover {background-image:url(../img/back-05.png);}	
+
+.downloadb li span{
+	width:40px;
+	height:40px;
+	float:right;
+	/*margin:6px 10px;*/
+	background-image:url(../img/netdow2.png);/*Download Icon 1 2 3 */
+	background-position:center;
+	background-repeat:no-repeat;
+}		
+	
+.downloadb li {
+	list-style-image:none;
+	list-style-position:outside;
+	list-style-type:none;
+	width: 200px;
+	height: 50px;
+	
+	
+	}
+
+
+/********************************* BOX INFO 1 *****************************/	
+
+blockquote{
+	width: 90%;
+	margin:10px;
+	padding: 3px 15px 10px 20px;
+	// padding: 5px;  
+	border-width: 1px;
+	border-style: solid;
+	border-color:#CCC;
+	border-radius:5px;
+	background-color:#FFF;
+	-webkit-border-radius: 5px;
+	-moz-border-radius:5px;
+	//	margin:20px auto;
+	text-align:left;
+	background: -moz-linear-gradient(top, #fbfbfb, #f1f1f1) repeat-X;
+	background: -webkit-gradient(linear, left top, left bottom, from(#fbfbfb), to(#f1f1f1)) repeat-X;
+	-ms-filter: "progid:DXImageTransform.Microsoft.gradient(startColorstr=#666, endColorstr=#FFFFFF)";
+	filter: progid:DXImageTransform.Microsoft.gradient(startColorstr=#fbfbfb, endColorstr=#f1f1f1);
+	border-width: 1px;
+	border-style: solid;
+	border-color:#CCC;
+	border-radius:5px;
+	background-color:#FFF;
+	-webkit-border-radius: 5px;
+	-moz-border-radius:5px;
+	font-size:12px;
+	}
+	
+blockquote ul {
+	padding-left:15px;
+//        list-style-image: url(../img/bullet.gif);
+	}
+	
+blockquote h5{
+	margin:0;
+	padding:0;
+	font-size:12px;
+	}	
+	
+.boxInfoWH1{
+	width: 80%;
+	height: auto;
+	}
+	
+.boxInfoWH2{
+	width:600px;
+	height: 100px;
+	}
+
+
+
+.boxCode{
+	width: 90%;
+	margin:10px;
+	background-color:#fff;
+	text-align:left;
+	border-width: 1px;
+	border-style: solid;
+	border-color:#939593;
+	-moz-background-clip:border;
+	-moz-background-inline-policy:continuous;
+	-moz-background-origin:padding;
+	border-radius:5px;
+	-webkit-border-radius: 5px;
+	-moz-border-radius:5px;
+	padding:5px;
+	}
+
+
+	
+.boxInfo2 a{
+	color:#1B211F;
+	/*text-shadow:0 1px 0 #778E88;*/
+	font-weight:bold;
+	font-size:12px;
+	line-height:19px;
+	text-decoration:none;	
+	}
+	
+.boxInfo2 a:hover{
+	text-shadow:0 1px 0 #000;
+	}	
+		
+.boxInfo2 a:visited{
+	color:#1B211F;
+	text-shadow:0 1px 0 #778E88;
+	}
+
+
+/********************************* BOX BANNER *****************************/	
+.boxInfoBanner{
+	margin:20px auto;
+	border-width: 1px;
+	border-style: solid;
+	border-color:#939593;
+	-moz-background-clip:border;
+	-moz-background-inline-policy:continuous;
+	-moz-background-origin:padding;
+	border-radius:5px;
+	-webkit-border-radius: 5px;
+	-moz-border-radius:5px;
+	background-image:url(../img/online_book_cover.jpg);
+	background-position:center;
+	background-repeat:no-repeat;
+	width: 240px;
+	height: 175px;
+	/*-moz-box-shadow:1px 1px 4px #999999;
+	-webkit-box-shadow:0px 5px 10px #999999;*/
+	cursor:pointer;
+	}
+	
+.boxTopDesc{
+    position:relative;
+    top:-25px;
+	font-weight:bold;
+	font-size:18px;
+	}	
+	
+.boxTopDesc:hover{
+	color:#a7b6b5;
+	}
+	
+.boxSimple{
+	margin:auto;
+	border-width: 1px;
+	border-style: solid;
+	border-color:#939593;
+	-moz-background-clip:border;
+	-moz-background-inline-policy:continuous;
+	-moz-background-origin:padding;
+	border-radius:5px;
+	-webkit-border-radius: 5px;
+	-moz-border-radius:5px;
+	
+	background-position:center;
+	background-repeat:no-repeat;
+	width: 160px;
+	height: 106px;
+	left:0;
+	/*-moz-box-shadow:1px 1px 4px #999999;
+	-webkit-box-shadow:0px 5px 10px #999999;*/
+	margin-right:110px;
+	margin-top:10px;
+	}
+		
+
+/******************************* BOX SEARCH *****************************/	
+
+.boxSearch1{
+    width: 240px;
+	height: 27px;
+	margin:20px auto;
+	background-color:#f1f6f2;
+	text-align:left;
+	border-width: 1px;
+	border-style: solid;
+	border-color:#939593;
+	-moz-background-clip:border;
+	-moz-background-inline-policy:continuous;
+	-moz-background-origin:padding;
+	border-radius:5px;
+	-webkit-border-radius: 5px;
+	-moz-border-radius:5px;
+	background-image:url(../img/back-04.png);
+	background-position:bottom;
+	background-repeat:repeat-x;
+	}
+	
+.boxSearch2{
+	width:27px;
+	height:26px;
+	background-image:url(../img/icons/1283523626_search.png);
+	background-repeat:no-repeat;
+	background-position:center;
+	float:right;
+	}
+
+
+/********************************* LEFT LINKS ************************/	
+a.btleftlink{
+	color:#383838;
+    font-family:Helvetica,Tahoma,Arial,Sans-Serif;
+    font-size:18px;
+    line-height:24px;
+	text-decoration:none;
+	float:left;
+	margin:4px 0px 0px 40px;
+	}
+	
+a.btleftlink:hover{
+	color:#a7b6b5;
+	}	
+
+.leftlink{
+	margin-left:30px;
+	width:245px;
+	height:30px;
+	background-repeat:no-repeat;
+	background-position:left;
+	}
+	
+.leftlinkIcoA{
+	background-image:url(../img/icons/usergroups.png);
+	}
+		
+.leftlinkIcoB{
+	background-image:url(../img/icons/twitter.png);
+	}
+	
+.leftlinkIcoC{
+	background-image:url(../img/icons/tutorials.png);
+	}
+	
+.leftlinkIcoD{
+	background-image:url(../img/icons/videos.png);
+	}	
+	
+.leftlinkIcoE{
+	background-image:url(../img/icons/examples.png);
+	}
+	
+.leftlinkIcoF{
+	background-image:url(../img/icons/uservoice.png);
+	}	
+	
+.leftlinkIcoG{
+	background-image:url(../img/icons/slices.png);
+	}
+.leftlinkIcoH{
+	background-image:url(../img/icons/demo.png);
+	}
+.leftlinkIcoI{
+	background-image:url(../img/icons/appliances.png);
+	}
+.leftlinkIcoJ{
+	background-image:url(../img/icons/plugins.png);
+	}
+.leftlinkIcoK{
+	background-image:url(../img/icons/livechat.png);
+	}
+	
+	
+/************flash************************/
+
+.flash{
+	width:50%;
+	padding-bottom:5px;
+	margin:auto;
+        display:none;
+        
+	
+}
+
+.flashdiv{
+    position:fixed;
+	top:90px;
+	z-index:999;
+	width:100%;
+	margin:auto;
+	position:fixed;
+	text-align:center;
+
+
+}	
+	
+

ADDED   applications/examples/static/css/menu.css
Index: applications/examples/static/css/menu.css
==================================================================
--- /dev/null
+++ applications/examples/static/css/menu.css
@@ -0,0 +1,136 @@
+/*********** MENU COMPLETO **********/
+.headermenu{
+	position:absolute;
+	margin:10px 10px;
+	background-image:url(../img/Menu-2.png);
+	background-repeat:no-repeat;
+	background-position:0px 0px;
+    width:655px;
+    height:37px;
+	left:290px;
+	top: 30px;
+	z-index:200px;
+}	 
+a.home{
+	position:absolute;
+	top:0px;
+	left:0px;
+	z-index:0;
+	width:109px;
+	height:36px;
+}
+a:hover.home {
+	background-image:url(../img/Menu-2.png);
+	background-repeat:no-repeat;
+	background-position:0px -38px;
+}
+a:active.home {
+	background-image:url(../img/Menu-2.png);
+	background-repeat:no-repeat;
+	background-position:-0px -76px;
+	border-collapse:inherit;
+	
+}
+a.about{
+	position:absolute;
+	top:0px;
+	left:108px;
+	z-index:1;
+	width:104px;
+	height:36px;
+}
+a:hover.about {
+	background-image:url(../img/Menu-2.png);
+	background-repeat:no-repeat;
+	background-position:-108px -37px;
+}
+a:active.about {
+	background-image:url(../img/Menu-2.png);
+	background-repeat:no-repeat;
+	background-position:-108px -76px
+}
+
+
+a.download{
+	position:absolute;
+	top:0px;
+	left:211px;
+	z-index:2;
+	width:104px;
+	height:36px;
+}
+a:hover.download {
+	background-image:url(../img/Menu-2.png);
+	background-repeat:no-repeat;
+	background-position:-211px -37px;
+}
+a:active.download {
+	background-image:url(../img/Menu-2.png);
+	background-repeat:no-repeat;
+	background-position:-211px -76px
+}
+a.staff{
+	position:absolute;
+	top:0px;
+	left:315px;
+	z-index:3;
+	width:103px;
+	height:36px;
+}
+a:hover.staff {
+	background-image:url(../img/Menu-2.png);
+	background-repeat:no-repeat;
+	background-position:-315px -37px;
+}
+a:active.staff {
+	background-image:url(../img/Menu-2.png);
+	background-repeat:no-repeat;
+	background-position:-315px -76px
+}
+a.support{
+	position:absolute;
+	top:0px;
+	left:418px;
+	z-index:4;
+	width:103px;
+	height:36px;
+}
+a:hover.support {
+	background-image:url(../img/Menu-2.png);
+	background-repeat:no-repeat;
+	background-position:-418px -37px;
+}
+a:active.support {
+	background-image:url(../img/Menu-2.png);
+	background-repeat:no-repeat;
+	background-position:-418px -76px
+}
+a.documentation{
+	position:absolute;
+	top:0px;
+	left:520px;
+	z-index:5;
+	width:133px;
+	height:36px;
+}
+a:hover.documentation {
+	background-image:url(../img/Menu-2.png);
+	background-repeat:no-repeat;
+	background-position:-520px -37px
+}
+a:active.documentation {
+	background-image:url(../img/Menu-2.png);
+	background-repeat:no-repeat;
+	background-position:-520px -76px;
+}
+
+.pressed{
+    z-index:0;
+    background-image:url(../img/Menu-2.png);
+	background-repeat:no-repeat;
+	   
+    }
+
+/*************** FIM DO MENU COMPLETO **********************/
+		
+		

ADDED   applications/examples/static/epydoc/api-objects.txt
Index: applications/examples/static/epydoc/api-objects.txt
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/api-objects.txt
@@ -0,0 +1,5844 @@
+psycopg2	psycopg2-module.html
+psycopg2.Binary	psycopg2-module.html#Binary
+psycopg2.NUMBER	psycopg2-module.html#NUMBER
+psycopg2.connect	psycopg2-module.html#connect
+psycopg2.threadsafety	psycopg2-module.html#threadsafety
+psycopg2.TimeFromTicks	psycopg2-module.html#TimeFromTicks
+psycopg2.Timestamp	psycopg2-module.html#Timestamp
+psycopg2.Date	psycopg2-module.html#Date
+psycopg2.TimestampFromTicks	psycopg2-module.html#TimestampFromTicks
+psycopg2.STRING	psycopg2-module.html#STRING
+psycopg2.DATETIME	psycopg2-module.html#DATETIME
+psycopg2.Time	psycopg2-module.html#Time
+psycopg2.DateFromTicks	psycopg2-module.html#DateFromTicks
+psycopg2.BINARY	psycopg2-module.html#BINARY
+psycopg2.paramstyle	psycopg2-module.html#paramstyle
+psycopg2.k	psycopg2-module.html#k
+psycopg2.ROWID	psycopg2-module.html#ROWID
+psycopg2.apilevel	psycopg2-module.html#apilevel
+psycopg2.tz	psycopg2.tz-module.html
+psycopg2.tz.STDOFFSET	psycopg2.tz-module.html#STDOFFSET
+psycopg2.tz.DSTDIFF	psycopg2.tz-module.html#DSTDIFF
+psycopg2.tz.DSTOFFSET	psycopg2.tz-module.html#DSTOFFSET
+psycopg2.tz.ZERO	psycopg2.tz-module.html#ZERO
+psycopg2.tz.LOCAL	psycopg2.tz-module.html#LOCAL
+sqlite3.dbapi2	sqlite3.dbapi2-module.html
+sqlite3.dbapi2.SQLITE_DROP_VIEW	sqlite3.dbapi2-module.html#SQLITE_DROP_VIEW
+sqlite3.dbapi2.SQLITE_CREATE_TRIGGER	sqlite3.dbapi2-module.html#SQLITE_CREATE_TRIGGER
+sqlite3.dbapi2.version	sqlite3.dbapi2-module.html#version
+sqlite3.dbapi2.SQLITE_OK	sqlite3.dbapi2-module.html#SQLITE_OK
+sqlite3.dbapi2.SQLITE_DELETE	sqlite3.dbapi2-module.html#SQLITE_DELETE
+sqlite3.dbapi2.PARSE_DECLTYPES	sqlite3.dbapi2-module.html#PARSE_DECLTYPES
+sqlite3.dbapi2.SQLITE_DENY	sqlite3.dbapi2-module.html#SQLITE_DENY
+sqlite3.dbapi2.paramstyle	sqlite3.dbapi2-module.html#paramstyle
+sqlite3.dbapi2.SQLITE_DROP_TEMP_VIEW	sqlite3.dbapi2-module.html#SQLITE_DROP_TEMP_VIEW
+sqlite3.dbapi2.SQLITE_DROP_INDEX	sqlite3.dbapi2-module.html#SQLITE_DROP_INDEX
+sqlite3.dbapi2.SQLITE_CREATE_TEMP_INDEX	sqlite3.dbapi2-module.html#SQLITE_CREATE_TEMP_INDEX
+sqlite3.dbapi2.SQLITE_IGNORE	sqlite3.dbapi2-module.html#SQLITE_IGNORE
+sqlite3.dbapi2.sqlite_version_info	sqlite3.dbapi2-module.html#sqlite_version_info
+sqlite3.dbapi2.SQLITE_ATTACH	sqlite3.dbapi2-module.html#SQLITE_ATTACH
+sqlite3.dbapi2.SQLITE_SELECT	sqlite3.dbapi2-module.html#SQLITE_SELECT
+sqlite3.dbapi2.SQLITE_CREATE_TABLE	sqlite3.dbapi2-module.html#SQLITE_CREATE_TABLE
+sqlite3.dbapi2.SQLITE_READ	sqlite3.dbapi2-module.html#SQLITE_READ
+sqlite3.dbapi2.SQLITE_CREATE_VIEW	sqlite3.dbapi2-module.html#SQLITE_CREATE_VIEW
+sqlite3.dbapi2.SQLITE_CREATE_TEMP_TRIGGER	sqlite3.dbapi2-module.html#SQLITE_CREATE_TEMP_TRIGGER
+sqlite3.dbapi2.SQLITE_PRAGMA	sqlite3.dbapi2-module.html#SQLITE_PRAGMA
+sqlite3.dbapi2.adapters	sqlite3.dbapi2-module.html#adapters
+sqlite3.dbapi2.SQLITE_CREATE_INDEX	sqlite3.dbapi2-module.html#SQLITE_CREATE_INDEX
+sqlite3.dbapi2.threadsafety	sqlite3.dbapi2-module.html#threadsafety
+sqlite3.dbapi2.SQLITE_ANALYZE	sqlite3.dbapi2-module.html#SQLITE_ANALYZE
+sqlite3.dbapi2.SQLITE_DROP_TEMP_TRIGGER	sqlite3.dbapi2-module.html#SQLITE_DROP_TEMP_TRIGGER
+sqlite3.dbapi2.converters	sqlite3.dbapi2-module.html#converters
+sqlite3.dbapi2.SQLITE_CREATE_TEMP_VIEW	sqlite3.dbapi2-module.html#SQLITE_CREATE_TEMP_VIEW
+sqlite3.dbapi2.SQLITE_INSERT	sqlite3.dbapi2-module.html#SQLITE_INSERT
+sqlite3.dbapi2.SQLITE_DROP_TEMP_INDEX	sqlite3.dbapi2-module.html#SQLITE_DROP_TEMP_INDEX
+sqlite3.dbapi2.SQLITE_UPDATE	sqlite3.dbapi2-module.html#SQLITE_UPDATE
+sqlite3.dbapi2.version_info	sqlite3.dbapi2-module.html#version_info
+sqlite3.dbapi2.SQLITE_DETACH	sqlite3.dbapi2-module.html#SQLITE_DETACH
+sqlite3.dbapi2.SQLITE_ALTER_TABLE	sqlite3.dbapi2-module.html#SQLITE_ALTER_TABLE
+sqlite3.dbapi2.sqlite_version	sqlite3.dbapi2-module.html#sqlite_version
+sqlite3.dbapi2.SQLITE_DROP_TEMP_TABLE	sqlite3.dbapi2-module.html#SQLITE_DROP_TEMP_TABLE
+sqlite3.dbapi2.PARSE_COLNAMES	sqlite3.dbapi2-module.html#PARSE_COLNAMES
+sqlite3.dbapi2.apilevel	sqlite3.dbapi2-module.html#apilevel
+sqlite3.dbapi2.DateFromTicks	sqlite3.dbapi2-module.html#DateFromTicks
+sqlite3.dbapi2.TimeFromTicks	sqlite3.dbapi2-module.html#TimeFromTicks
+sqlite3.dbapi2.SQLITE_REINDEX	sqlite3.dbapi2-module.html#SQLITE_REINDEX
+sqlite3.dbapi2.TimestampFromTicks	sqlite3.dbapi2-module.html#TimestampFromTicks
+sqlite3.dbapi2.SQLITE_CREATE_TEMP_TABLE	sqlite3.dbapi2-module.html#SQLITE_CREATE_TEMP_TABLE
+sqlite3.dbapi2.SQLITE_TRANSACTION	sqlite3.dbapi2-module.html#SQLITE_TRANSACTION
+sqlite3.dbapi2.x	sqlite3.dbapi2-module.html#x
+sqlite3.dbapi2.SQLITE_DROP_TRIGGER	sqlite3.dbapi2-module.html#SQLITE_DROP_TRIGGER
+sqlite3.dbapi2.SQLITE_DROP_TABLE	sqlite3.dbapi2-module.html#SQLITE_DROP_TABLE
+web2py.gluon	web2py.gluon-module.html
+web2py.gluon.TAG	web2py.gluon-module.html#TAG
+web2py.gluon.URL	web2py.gluon-module.html#URL
+web2py.gluon.ON	web2py.gluon-module.html#ON
+web2py.gluon.current	web2py.gluon-module.html#current
+web2py.gluon.redirect	web2py.gluon-module.html#redirect
+web2py.gluon.embed64	web2py.gluon-module.html#embed64
+web2py.gluon.admin	web2py.gluon.admin-module.html
+web2py.gluon.admin.app_create	web2py.gluon.admin-module.html#app_create
+web2py.gluon.admin.app_cleanup	web2py.gluon.admin-module.html#app_cleanup
+web2py.gluon.admin.plugin_pack	web2py.gluon.admin-module.html#plugin_pack
+web2py.gluon.admin.w2p_unpack	web2py.gluon.fileutils-module.html#w2p_unpack
+web2py.gluon.admin.write_file	web2py.gluon.fileutils-module.html#write_file
+web2py.gluon.admin.web2py_uuid	web2py.gluon.utils-module.html#web2py_uuid
+web2py.gluon.admin.check_new_version	web2py.gluon.admin-module.html#check_new_version
+web2py.gluon.admin.read_file	web2py.gluon.fileutils-module.html#read_file
+web2py.gluon.admin.w2p_pack_plugin	web2py.gluon.fileutils-module.html#w2p_pack_plugin
+web2py.gluon.admin.upgrade	web2py.gluon.admin-module.html#upgrade
+web2py.gluon.admin.w2p_pack	web2py.gluon.fileutils-module.html#w2p_pack
+web2py.gluon.admin.app_pack	web2py.gluon.admin-module.html#app_pack
+web2py.gluon.admin.recursive_unlink	web2py.gluon.fileutils-module.html#recursive_unlink
+web2py.gluon.admin.unzip	web2py.gluon.admin-module.html#unzip
+web2py.gluon.admin.create_missing_folders	web2py.gluon.admin-module.html#create_missing_folders
+web2py.gluon.admin.app_install	web2py.gluon.admin-module.html#app_install
+web2py.gluon.admin.app_compile	web2py.gluon.admin-module.html#app_compile
+web2py.gluon.admin.w2p_unpack_plugin	web2py.gluon.fileutils-module.html#w2p_unpack_plugin
+web2py.gluon.admin.abspath	web2py.gluon.fileutils-module.html#abspath
+web2py.gluon.admin.apath	web2py.gluon.admin-module.html#apath
+web2py.gluon.admin.plugin_install	web2py.gluon.admin-module.html#plugin_install
+web2py.gluon.admin.add_path_first	web2py.gluon.admin-module.html#add_path_first
+web2py.gluon.admin.app_pack_compiled	web2py.gluon.admin-module.html#app_pack_compiled
+web2py.gluon.admin.fix_newlines	web2py.gluon.fileutils-module.html#fix_newlines
+web2py.gluon.admin.up	web2py.gluon.fileutils-module.html#up
+web2py.gluon.admin.create_missing_app_folders	web2py.gluon.admin-module.html#create_missing_app_folders
+web2py.gluon.admin.app_uninstall	web2py.gluon.admin-module.html#app_uninstall
+web2py.gluon.cache	web2py.gluon.cache-module.html
+web2py.gluon.cache.DEFAULT_TIME_EXPIRE	web2py.gluon.cache-module.html#DEFAULT_TIME_EXPIRE
+web2py.gluon.cache.logger	web2py.gluon.cache-module.html#logger
+web2py.gluon.cfs	web2py.gluon.cfs-module.html
+web2py.gluon.cfs.cfs_lock	web2py.gluon.cfs-module.html#cfs_lock
+web2py.gluon.cfs.read_file	web2py.gluon.fileutils-module.html#read_file
+web2py.gluon.cfs.getcfs	web2py.gluon.cfs-module.html#getcfs
+web2py.gluon.cfs.cfs	web2py.gluon.cfs-module.html#cfs
+web2py.gluon.compileapp	web2py.gluon.compileapp-module.html
+web2py.gluon.compileapp.run_controller_in	web2py.gluon.compileapp-module.html#run_controller_in
+web2py.gluon.compileapp.is_gae	web2py.gluon.compileapp-module.html#is_gae
+web2py.gluon.compileapp.build_environment	web2py.gluon.compileapp-module.html#build_environment
+web2py.gluon.compileapp.TEST_CODE	web2py.gluon.compileapp-module.html#TEST_CODE
+web2py.gluon.compileapp.read_file	web2py.gluon.fileutils-module.html#read_file
+web2py.gluon.compileapp.write_file	web2py.gluon.fileutils-module.html#write_file
+web2py.gluon.compileapp.save_pyc	web2py.gluon.compileapp-module.html#save_pyc
+web2py.gluon.compileapp.run_view_in	web2py.gluon.compileapp-module.html#run_view_in
+web2py.gluon.compileapp.compile2	web2py.gluon.restricted-module.html#compile2
+web2py.gluon.compileapp.redirect	web2py.gluon.http-module.html#redirect
+web2py.gluon.compileapp.is_jython	web2py.gluon.compileapp-module.html#is_jython
+web2py.gluon.compileapp.getcfs	web2py.gluon.cfs-module.html#getcfs
+web2py.gluon.compileapp.compile_models	web2py.gluon.compileapp-module.html#compile_models
+web2py.gluon.compileapp.logger	web2py.gluon.compileapp-module.html#logger
+web2py.gluon.compileapp.listdir	web2py.gluon.fileutils-module.html#listdir
+web2py.gluon.compileapp.read_pyc	web2py.gluon.compileapp-module.html#read_pyc
+web2py.gluon.compileapp.run_models_in	web2py.gluon.compileapp-module.html#run_models_in
+web2py.gluon.compileapp.parse_template	web2py.gluon.template-module.html#parse_template
+web2py.gluon.compileapp.compile_views	web2py.gluon.compileapp-module.html#compile_views
+web2py.gluon.compileapp.test	web2py.gluon.compileapp-module.html#test
+web2py.gluon.compileapp.local_import_aux	web2py.gluon.compileapp-module.html#local_import_aux
+web2py.gluon.compileapp.remove_compiled_application	web2py.gluon.compileapp-module.html#remove_compiled_application
+web2py.gluon.compileapp.mktree	web2py.gluon.fileutils-module.html#mktree
+web2py.gluon.compileapp.compile_controllers	web2py.gluon.compileapp-module.html#compile_controllers
+web2py.gluon.compileapp.restricted	web2py.gluon.restricted-module.html#restricted
+web2py.gluon.compileapp.compile_application	web2py.gluon.compileapp-module.html#compile_application
+web2py.gluon.contenttype	web2py.gluon.contenttype-module.html
+web2py.gluon.contenttype.contenttype	web2py.gluon.contenttype-module.html#contenttype
+web2py.gluon.contenttype.CONTENT_TYPE	web2py.gluon.contenttype-module.html#CONTENT_TYPE
+web2py.gluon.contrib.pymysql	web2py.gluon.contrib.pymysql-module.html
+web2py.gluon.contrib.pymysql.Binary	web2py.gluon.contrib.pymysql-module.html#Binary
+web2py.gluon.contrib.pymysql.NUMBER	web2py.gluon.contrib.pymysql-module.html#NUMBER
+web2py.gluon.contrib.pymysql.connect	web2py.gluon.contrib.pymysql-module.html#connect
+web2py.gluon.contrib.pymysql.escape_dict	web2py.gluon.contrib.pymysql-module.html#escape_dict
+web2py.gluon.contrib.pymysql.DATE	web2py.gluon.contrib.pymysql-module.html#DATE
+web2py.gluon.contrib.pymysql.escape_string	web2py.gluon.contrib.pymysql-module.html#escape_string
+web2py.gluon.contrib.pymysql.NULL	web2py.gluon.contrib.pymysql-module.html#NULL
+web2py.gluon.contrib.pymysql.threadsafety	web2py.gluon.contrib.pymysql-module.html#threadsafety
+web2py.gluon.contrib.pymysql.thread_safe	web2py.gluon.contrib.pymysql-module.html#thread_safe
+web2py.gluon.contrib.pymysql.TimeFromTicks	web2py.gluon.contrib.pymysql-module.html#TimeFromTicks
+web2py.gluon.contrib.pymysql.install_as_MySQLdb	web2py.gluon.contrib.pymysql-module.html#install_as_MySQLdb
+web2py.gluon.contrib.pymysql.TimestampFromTicks	web2py.gluon.contrib.pymysql-module.html#TimestampFromTicks
+web2py.gluon.contrib.pymysql.STRING	web2py.gluon.contrib.pymysql-module.html#STRING
+web2py.gluon.contrib.pymysql.version_info	web2py.gluon.contrib.pymysql-module.html#version_info
+web2py.gluon.contrib.pymysql.escape_sequence	web2py.gluon.contrib.pymysql-module.html#escape_sequence
+web2py.gluon.contrib.pymysql.DATETIME	web2py.gluon.contrib.pymysql-module.html#DATETIME
+web2py.gluon.contrib.pymysql.Connection	web2py.gluon.contrib.pymysql-module.html#Connection
+web2py.gluon.contrib.pymysql.VERSION	web2py.gluon.contrib.pymysql-module.html#VERSION
+web2py.gluon.contrib.pymysql.paramstyle	web2py.gluon.contrib.pymysql-module.html#paramstyle
+web2py.gluon.contrib.pymysql.DateFromTicks	web2py.gluon.contrib.pymysql-module.html#DateFromTicks
+web2py.gluon.contrib.pymysql.BINARY	web2py.gluon.contrib.pymysql-module.html#BINARY
+web2py.gluon.contrib.pymysql.TIMESTAMP	web2py.gluon.contrib.pymysql-module.html#TIMESTAMP
+web2py.gluon.contrib.pymysql.get_client_info	web2py.gluon.contrib.pymysql-module.html#get_client_info
+web2py.gluon.contrib.pymysql.Connect	web2py.gluon.contrib.pymysql-module.html#Connect
+web2py.gluon.contrib.pymysql.ROWID	web2py.gluon.contrib.pymysql-module.html#ROWID
+web2py.gluon.contrib.pymysql.TIME	web2py.gluon.contrib.pymysql-module.html#TIME
+web2py.gluon.contrib.pymysql.apilevel	web2py.gluon.contrib.pymysql-module.html#apilevel
+web2py.gluon.contrib.pymysql.constants	web2py.gluon.contrib.pymysql.constants-module.html
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.LONGLONG	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#LONGLONG
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.SHORT	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#SHORT
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.TINY_BLOB	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#TINY_BLOB
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.CHAR	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#CHAR
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.TINY	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#TINY
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.DATE	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#DATE
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.NEWDATE	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#NEWDATE
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.NULL	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#NULL
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.TIMESTAMP	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#TIMESTAMP
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.SET	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#SET
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.VARCHAR	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#VARCHAR
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.INTERVAL	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#INTERVAL
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.LONG	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#LONG
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.NEWDECIMAL	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#NEWDECIMAL
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.BIT	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#BIT
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.MEDIUM_BLOB	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#MEDIUM_BLOB
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.VAR_STRING	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#VAR_STRING
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.STRING	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#STRING
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.DECIMAL	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#DECIMAL
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.ENUM	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#ENUM
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.LONG_BLOB	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#LONG_BLOB
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.DATETIME	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#DATETIME
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.YEAR	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#YEAR
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.GEOMETRY	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#GEOMETRY
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.DOUBLE	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#DOUBLE
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.FLOAT	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#FLOAT
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.INT24	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#INT24
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.BLOB	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#BLOB
+web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.TIME	web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html#TIME
+web2py.gluon.contrib.pymysql.converters	web2py.gluon.contrib.pymysql.converters-module.html
+web2py.gluon.contrib.pymysql.converters.conversions	web2py.gluon.contrib.pymysql.converters-module.html#conversions
+web2py.gluon.contrib.pymysql.converters.convert_bit	web2py.gluon.contrib.pymysql.converters-module.html#convert_bit
+web2py.gluon.contrib.pymysql.converters.escape_int	web2py.gluon.contrib.pymysql.converters-module.html#escape_int
+web2py.gluon.contrib.pymysql.converters.decoders	web2py.gluon.contrib.pymysql.converters-module.html#decoders
+web2py.gluon.contrib.pymysql.converters.escape_object	web2py.gluon.contrib.pymysql.converters-module.html#escape_object
+web2py.gluon.contrib.pymysql.converters.convert_timedelta	web2py.gluon.contrib.pymysql.converters-module.html#convert_timedelta
+web2py.gluon.contrib.pymysql.converters.escape_item	web2py.gluon.contrib.pymysql.converters-module.html#escape_item
+web2py.gluon.contrib.pymysql.converters.escape_unicode	web2py.gluon.contrib.pymysql.converters-module.html#escape_unicode
+web2py.gluon.contrib.pymysql.converters.ESCAPE_MAP	web2py.gluon.contrib.pymysql.converters-module.html#ESCAPE_MAP
+web2py.gluon.contrib.pymysql.converters.escape_dict	web2py.gluon.contrib.pymysql.converters-module.html#escape_dict
+web2py.gluon.contrib.pymysql.converters.escape_None	web2py.gluon.contrib.pymysql.converters-module.html#escape_None
+web2py.gluon.contrib.pymysql.converters.escape_string	web2py.gluon.contrib.pymysql.converters-module.html#escape_string
+web2py.gluon.contrib.pymysql.converters.convert_characters	web2py.gluon.contrib.pymysql.converters-module.html#convert_characters
+web2py.gluon.contrib.pymysql.converters.convert_date	web2py.gluon.contrib.pymysql.converters-module.html#convert_date
+web2py.gluon.contrib.pymysql.converters.encoders	web2py.gluon.contrib.pymysql.converters-module.html#encoders
+web2py.gluon.contrib.pymysql.converters.escape_long	web2py.gluon.contrib.pymysql.converters-module.html#escape_long
+web2py.gluon.contrib.pymysql.converters.convert_float	web2py.gluon.contrib.pymysql.converters-module.html#convert_float
+web2py.gluon.contrib.pymysql.converters.escape_timedelta	web2py.gluon.contrib.pymysql.converters-module.html#escape_timedelta
+web2py.gluon.contrib.pymysql.converters.escape_datetime	web2py.gluon.contrib.pymysql.converters-module.html#escape_datetime
+web2py.gluon.contrib.pymysql.converters.escape_set	web2py.gluon.contrib.pymysql.converters-module.html#escape_set
+web2py.gluon.contrib.pymysql.converters.escape_struct_time	web2py.gluon.contrib.pymysql.converters-module.html#escape_struct_time
+web2py.gluon.contrib.pymysql.converters.escape_bool	web2py.gluon.contrib.pymysql.converters-module.html#escape_bool
+web2py.gluon.contrib.pymysql.converters.escape_date	web2py.gluon.contrib.pymysql.converters-module.html#escape_date
+web2py.gluon.contrib.pymysql.converters.escape_sequence	web2py.gluon.contrib.pymysql.converters-module.html#escape_sequence
+web2py.gluon.contrib.pymysql.converters.ESCAPE_REGEX	web2py.gluon.contrib.pymysql.converters-module.html#ESCAPE_REGEX
+web2py.gluon.contrib.pymysql.converters.convert_time	web2py.gluon.contrib.pymysql.converters-module.html#convert_time
+web2py.gluon.contrib.pymysql.converters.convert_mysql_timestamp	web2py.gluon.contrib.pymysql.converters-module.html#convert_mysql_timestamp
+web2py.gluon.contrib.pymysql.converters.convert_long	web2py.gluon.contrib.pymysql.converters-module.html#convert_long
+web2py.gluon.contrib.pymysql.converters.convert_set	web2py.gluon.contrib.pymysql.converters-module.html#convert_set
+web2py.gluon.contrib.pymysql.converters.convert_datetime	web2py.gluon.contrib.pymysql.converters-module.html#convert_datetime
+web2py.gluon.contrib.pymysql.converters.escape_float	web2py.gluon.contrib.pymysql.converters-module.html#escape_float
+web2py.gluon.contrib.pymysql.converters.convert_int	web2py.gluon.contrib.pymysql.converters-module.html#convert_int
+web2py.gluon.contrib.pymysql.converters.convert_decimal	web2py.gluon.contrib.pymysql.converters-module.html#convert_decimal
+web2py.gluon.contrib.pymysql.converters.escape_time	web2py.gluon.contrib.pymysql.converters-module.html#escape_time
+web2py.gluon.contrib.pymysql.converters.escape_decimal	web2py.gluon.contrib.pymysql.converters-module.html#escape_decimal
+web2py.gluon.custom_import	web2py.gluon.custom_import-module.html
+web2py.gluon.custom_import.custom_import_install	web2py.gluon.custom_import-module.html#custom_import_install
+web2py.gluon.custom_import._web2py_path	web2py.gluon.custom_import-module.html#_web2py_path
+web2py.gluon.custom_import.track_changes	web2py.gluon.custom_import-module.html#track_changes
+web2py.gluon.custom_import._web2py_date_tracker_importer	web2py.gluon.custom_import-module.html#_web2py_date_tracker_importer
+web2py.gluon.custom_import.is_tracking_changes	web2py.gluon.custom_import-module.html#is_tracking_changes
+web2py.gluon.custom_import._web2py_importer	web2py.gluon.custom_import-module.html#_web2py_importer
+web2py.gluon.custom_import._is_tracking_changes	web2py.gluon.custom_import-module.html#_is_tracking_changes
+web2py.gluon.dal	web2py.gluon.dal-module.html
+web2py.gluon.dal.regex_quotes	web2py.gluon.dal-module.html#regex_quotes
+web2py.gluon.dal.bar_decode_integer	web2py.gluon.dal-module.html#bar_decode_integer
+web2py.gluon.dal.have_serializers	web2py.gluon.dal-module.html#have_serializers
+web2py.gluon.dal.Rows_unpickler	web2py.gluon.dal-module.html#Rows_unpickler
+web2py.gluon.dal.Row_unpickler	web2py.gluon.dal-module.html#Row_unpickler
+web2py.gluon.dal.table_field	web2py.gluon.dal-module.html#table_field
+web2py.gluon.dal.logger	web2py.gluon.dal-module.html#logger
+web2py.gluon.dal.bar_escape	web2py.gluon.dal-module.html#bar_escape
+web2py.gluon.dal.Rows_pickler	web2py.gluon.dal-module.html#Rows_pickler
+web2py.gluon.dal.Row_pickler	web2py.gluon.dal-module.html#Row_pickler
+web2py.gluon.dal.bar_encode	web2py.gluon.dal-module.html#bar_encode
+web2py.gluon.dal.bar_decode_string	web2py.gluon.dal-module.html#bar_decode_string
+web2py.gluon.dal.test_all	web2py.gluon.dal-module.html#test_all
+web2py.gluon.dal.Reference_pickler	web2py.gluon.dal-module.html#Reference_pickler
+web2py.gluon.dal.regex_python_keywords	web2py.gluon.dal-module.html#regex_python_keywords
+web2py.gluon.dal.regex_dbname	web2py.gluon.dal-module.html#regex_dbname
+web2py.gluon.dal.have_validators	web2py.gluon.dal-module.html#have_validators
+web2py.gluon.dal.is_jdbc	web2py.gluon.dal-module.html#is_jdbc
+web2py.gluon.dal.thread	web2py.gluon.dal-module.html#thread
+web2py.gluon.dal.xorify	web2py.gluon.dal-module.html#xorify
+web2py.gluon.dal.DEFAULT	web2py.gluon.dal-module.html#DEFAULT
+web2py.gluon.dal.uuid2int	web2py.gluon.dal-module.html#uuid2int
+web2py.gluon.dal.regex_cleanup_fn	web2py.gluon.dal-module.html#regex_cleanup_fn
+web2py.gluon.dal.MAXCHARLENGTH	web2py.gluon.dal-module.html#MAXCHARLENGTH
+web2py.gluon.dal.update_record	web2py.gluon.dal-module.html#update_record
+web2py.gluon.dal.ADAPTERS	web2py.gluon.dal-module.html#ADAPTERS
+web2py.gluon.dal.regex_content	web2py.gluon.dal-module.html#regex_content
+web2py.gluon.dal.Reference_unpickler	web2py.gluon.dal-module.html#Reference_unpickler
+web2py.gluon.dal.INGRES_SEQNAME	web2py.gluon.dal-module.html#INGRES_SEQNAME
+web2py.gluon.dal.CALLABLETYPES	web2py.gluon.dal-module.html#CALLABLETYPES
+web2py.gluon.dal.have_portalocker	web2py.gluon.dal-module.html#have_portalocker
+web2py.gluon.dal.string_unpack	web2py.gluon.dal-module.html#string_unpack
+web2py.gluon.dal.sqlhtml_validators	web2py.gluon.dal-module.html#sqlhtml_validators
+web2py.gluon.dal.drivers	web2py.gluon.dal-module.html#drivers
+web2py.gluon.dal.cleanup	web2py.gluon.dal-module.html#cleanup
+web2py.gluon.dal.INFINITY	web2py.gluon.dal-module.html#INFINITY
+web2py.gluon.dal.sql_locker	web2py.gluon.dal-module.html#sql_locker
+web2py.gluon.dal.int2uuid	web2py.gluon.dal-module.html#int2uuid
+web2py.gluon.debug	web2py.gluon.debug-module.html
+web2py.gluon.debug.stop_trace	web2py.gluon.debug-module.html#stop_trace
+web2py.gluon.debug.debugger	web2py.gluon.debug-module.html#debugger
+web2py.gluon.debug.pipe_in	web2py.gluon.debug-module.html#pipe_in
+web2py.gluon.debug.set_trace	web2py.gluon.debug-module.html#set_trace
+web2py.gluon.debug.communicate	web2py.gluon.debug-module.html#communicate
+web2py.gluon.debug.pipe_out	web2py.gluon.debug-module.html#pipe_out
+web2py.gluon.debug.logger	web2py.gluon.debug-module.html#logger
+web2py.gluon.decoder	web2py.gluon.decoder-module.html
+web2py.gluon.decoder.autoDetectXMLEncoding	web2py.gluon.decoder-module.html#autoDetectXMLEncoding
+web2py.gluon.decoder.decoder	web2py.gluon.decoder-module.html#decoder
+web2py.gluon.decoder.autodetect_dict	web2py.gluon.decoder-module.html#autodetect_dict
+web2py.gluon.fileutils	web2py.gluon.fileutils-module.html
+web2py.gluon.fileutils.tar	web2py.gluon.fileutils-module.html#tar
+web2py.gluon.fileutils._extractall	web2py.gluon.fileutils-module.html#_extractall
+web2py.gluon.fileutils.listdir	web2py.gluon.fileutils-module.html#listdir
+web2py.gluon.fileutils.w2p_unpack	web2py.gluon.fileutils-module.html#w2p_unpack
+web2py.gluon.fileutils.write_file	web2py.gluon.fileutils-module.html#write_file
+web2py.gluon.fileutils.read_file	web2py.gluon.fileutils-module.html#read_file
+web2py.gluon.fileutils.w2p_pack_plugin	web2py.gluon.fileutils-module.html#w2p_pack_plugin
+web2py.gluon.fileutils.w2p_pack	web2py.gluon.fileutils-module.html#w2p_pack
+web2py.gluon.fileutils.recursive_unlink	web2py.gluon.fileutils-module.html#recursive_unlink
+web2py.gluon.fileutils.get_session	web2py.gluon.fileutils-module.html#get_session
+web2py.gluon.fileutils.w2p_unpack_plugin	web2py.gluon.fileutils-module.html#w2p_unpack_plugin
+web2py.gluon.fileutils.abspath	web2py.gluon.fileutils-module.html#abspath
+web2py.gluon.fileutils.untar	web2py.gluon.fileutils-module.html#untar
+web2py.gluon.fileutils.cleanpath	web2py.gluon.fileutils-module.html#cleanpath
+web2py.gluon.fileutils.make_fake_file_like_object	web2py.gluon.fileutils-module.html#make_fake_file_like_object
+web2py.gluon.fileutils.copystream	web2py.gluon.fileutils-module.html#copystream
+web2py.gluon.fileutils.fix_newlines	web2py.gluon.fileutils-module.html#fix_newlines
+web2py.gluon.fileutils.mktree	web2py.gluon.fileutils-module.html#mktree
+web2py.gluon.fileutils.readlines_file	web2py.gluon.fileutils-module.html#readlines_file
+web2py.gluon.fileutils.up	web2py.gluon.fileutils-module.html#up
+web2py.gluon.fileutils.tar_compiled	web2py.gluon.fileutils-module.html#tar_compiled
+web2py.gluon.fileutils.check_credentials	web2py.gluon.fileutils-module.html#check_credentials
+web2py.gluon.globals	web2py.gluon.globals-module.html
+web2py.gluon.globals.custom_json	web2py.gluon.serializers-module.html#custom_json
+web2py.gluon.globals.web2py_uuid	web2py.gluon.utils-module.html#web2py_uuid
+web2py.gluon.globals.streamer	web2py.gluon.streamer-module.html#streamer
+web2py.gluon.globals.stream_file_or_304_or_206	web2py.gluon.streamer-module.html#stream_file_or_304_or_206
+web2py.gluon.globals.contenttype	web2py.gluon.contenttype-module.html#contenttype
+web2py.gluon.globals.current	web2py.gluon.globals-module.html#current
+web2py.gluon.globals.json	web2py.gluon.serializers-module.html#json
+web2py.gluon.globals.handler	web2py.gluon.xmlrpc-module.html#handler
+web2py.gluon.globals.regex_session_id	web2py.gluon.globals-module.html#regex_session_id
+web2py.gluon.globals.up	web2py.gluon.fileutils-module.html#up
+web2py.gluon.globals.xmlescape	web2py.gluon.html-module.html#xmlescape
+web2py.gluon.highlight	web2py.gluon.highlight-module.html
+web2py.gluon.highlight.highlight	web2py.gluon.highlight-module.html#highlight
+web2py.gluon.html	web2py.gluon.html-module.html
+web2py.gluon.html.TAG	web2py.gluon.html-module.html#TAG
+web2py.gluon.html.URL	web2py.gluon.html-module.html#URL
+web2py.gluon.html.ON	web2py.gluon.html-module.html#ON
+web2py.gluon.html.TAG_unpickler	web2py.gluon.html-module.html#TAG_unpickler
+web2py.gluon.html.XML_pickle	web2py.gluon.html-module.html#XML_pickle
+web2py.gluon.html.hmac_hash	web2py.gluon.utils-module.html#hmac_hash
+web2py.gluon.html.markmin_serializer	web2py.gluon.html-module.html#markmin_serializer
+web2py.gluon.html.embed64	web2py.gluon.html-module.html#embed64
+web2py.gluon.html.xmlescape	web2py.gluon.html-module.html#xmlescape
+web2py.gluon.html.verifyURL	web2py.gluon.html-module.html#verifyURL
+web2py.gluon.html.web2py_uuid	web2py.gluon.utils-module.html#web2py_uuid
+web2py.gluon.html.regex_crlf	web2py.gluon.html-module.html#regex_crlf
+web2py.gluon.html.join	web2py.gluon.html-module.html#join
+web2py.gluon.html.highlight	web2py.gluon.highlight-module.html#highlight
+web2py.gluon.html.TAG_pickler	web2py.gluon.html-module.html#TAG_pickler
+web2py.gluon.html.XML_unpickle	web2py.gluon.html-module.html#XML_unpickle
+web2py.gluon.html.test	web2py.gluon.html-module.html#test
+web2py.gluon.html.markdown_serializer	web2py.gluon.html-module.html#markdown_serializer
+web2py.gluon.http	web2py.gluon.http-module.html
+web2py.gluon.http.redirect	web2py.gluon.http-module.html#redirect
+web2py.gluon.http.defined_status	web2py.gluon.http-module.html#defined_status
+web2py.gluon.import_all	web2py.gluon.import_all-module.html
+web2py.gluon.import_all.dirs	web2py.gluon.import_all-module.html#dirs
+web2py.gluon.import_all.files	web2py.gluon.import_all-module.html#files
+web2py.gluon.import_all.alert_dependency	web2py.gluon.import_all-module.html#alert_dependency
+web2py.gluon.import_all.base_modules	web2py.gluon.import_all-module.html#base_modules
+web2py.gluon.import_all.candidate	web2py.gluon.import_all-module.html#candidate
+web2py.gluon.import_all.python_version	web2py.gluon.import_all-module.html#python_version
+web2py.gluon.import_all.root	web2py.gluon.import_all-module.html#root
+web2py.gluon.import_all.contributed_modules	web2py.gluon.import_all-module.html#contributed_modules
+web2py.gluon.import_all.module	web2py.gluon.import_all-module.html#module
+web2py.gluon.import_all.py27_deprecated	web2py.gluon.import_all-module.html#py27_deprecated
+web2py.gluon.import_all.py26_deprecated	web2py.gluon.import_all-module.html#py26_deprecated
+web2py.gluon.import_all.name	web2py.gluon.import_all-module.html#name
+web2py.gluon.languages	web2py.gluon.languages-module.html
+web2py.gluon.languages.is_gae	web2py.gluon.languages-module.html#is_gae
+web2py.gluon.languages.regex_translate	web2py.gluon.languages-module.html#regex_translate
+web2py.gluon.languages.utf8_repr	web2py.gluon.languages-module.html#utf8_repr
+web2py.gluon.languages.PY_STRING_LITERAL_RE	web2py.gluon.languages-module.html#PY_STRING_LITERAL_RE
+web2py.gluon.languages.getcfs	web2py.gluon.cfs-module.html#getcfs
+web2py.gluon.languages.write_dict	web2py.gluon.languages-module.html#write_dict
+web2py.gluon.languages.listdir	web2py.gluon.fileutils-module.html#listdir
+web2py.gluon.languages.lazyT_pickle	web2py.gluon.languages-module.html#lazyT_pickle
+web2py.gluon.languages.lazyT_unpickle	web2py.gluon.languages-module.html#lazyT_unpickle
+web2py.gluon.languages.findT	web2py.gluon.languages-module.html#findT
+web2py.gluon.languages.read_dict_aux	web2py.gluon.languages-module.html#read_dict_aux
+web2py.gluon.languages.read_dict	web2py.gluon.languages-module.html#read_dict
+web2py.gluon.languages.regex_language	web2py.gluon.languages-module.html#regex_language
+web2py.gluon.languages.update_all_languages	web2py.gluon.languages-module.html#update_all_languages
+web2py.gluon.main	web2py.gluon.main-module.html
+web2py.gluon.main.build_environment	web2py.gluon.compileapp-module.html#build_environment
+web2py.gluon.main.parse_get_post_vars	web2py.gluon.main-module.html#parse_get_post_vars
+web2py.gluon.main.middleware_aux	web2py.gluon.main-module.html#middleware_aux
+web2py.gluon.main.write_file	web2py.gluon.fileutils-module.html#write_file
+web2py.gluon.main.get_client	web2py.gluon.main-module.html#get_client
+web2py.gluon.main.run_view_in	web2py.gluon.compileapp-module.html#run_view_in
+web2py.gluon.main.redirect	web2py.gluon.http-module.html#redirect
+web2py.gluon.main.contenttype	web2py.gluon.contenttype-module.html#contenttype
+web2py.gluon.main.logpath	web2py.gluon.main-module.html#logpath
+web2py.gluon.main.web2py_path	web2py.gluon.main-module.html#web2py_path
+web2py.gluon.main.logger	web2py.gluon.main-module.html#logger
+web2py.gluon.main.start_response_aux	web2py.gluon.main-module.html#start_response_aux
+web2py.gluon.main.create_missing_folders	web2py.gluon.admin-module.html#create_missing_folders
+web2py.gluon.main.version_info	web2py.gluon.main-module.html#version_info
+web2py.gluon.main.Url	web2py.gluon.html-module.html#URL
+web2py.gluon.main.regex_client	web2py.gluon.main-module.html#regex_client
+web2py.gluon.main.abspath	web2py.gluon.fileutils-module.html#abspath
+web2py.gluon.main.run_models_in	web2py.gluon.compileapp-module.html#run_models_in
+web2py.gluon.main.wsgibase	web2py.gluon.main-module.html#wsgibase
+web2py.gluon.main.copystream_progress	web2py.gluon.main-module.html#copystream_progress
+web2py.gluon.main.web2py_version	web2py.gluon.main-module.html#web2py_version
+web2py.gluon.main.run_controller_in	web2py.gluon.compileapp-module.html#run_controller_in
+web2py.gluon.main.custom_import_install	web2py.gluon.custom_import-module.html#custom_import_install
+web2py.gluon.main.appfactory	web2py.gluon.main-module.html#appfactory
+web2py.gluon.main.add_path_first	web2py.gluon.admin-module.html#add_path_first
+web2py.gluon.main.serve_controller	web2py.gluon.main-module.html#serve_controller
+web2py.gluon.main.copystream	web2py.gluon.fileutils-module.html#copystream
+web2py.gluon.main.create_missing_app_folders	web2py.gluon.admin-module.html#create_missing_app_folders
+web2py.gluon.main.environ_aux	web2py.gluon.main-module.html#environ_aux
+web2py.gluon.main.save_password	web2py.gluon.main-module.html#save_password
+web2py.gluon.main.requests	web2py.gluon.main-module.html#requests
+web2py.gluon.myregex	web2py.gluon.myregex-module.html
+web2py.gluon.myregex.regex_expose	web2py.gluon.myregex-module.html#regex_expose
+web2py.gluon.myregex.regex_tables	web2py.gluon.myregex-module.html#regex_tables
+web2py.gluon.myregex.regex_extend	web2py.gluon.myregex-module.html#regex_extend
+web2py.gluon.myregex.regex_include	web2py.gluon.myregex-module.html#regex_include
+web2py.gluon.newcron	web2py.gluon.newcron-module.html
+web2py.gluon.newcron._cron_stopping	web2py.gluon.newcron-module.html#_cron_stopping
+web2py.gluon.newcron.stopcron	web2py.gluon.newcron-module.html#stopcron
+web2py.gluon.newcron.parsecronline	web2py.gluon.newcron-module.html#parsecronline
+web2py.gluon.newcron.crondance	web2py.gluon.newcron-module.html#crondance
+web2py.gluon.newcron.logger	web2py.gluon.newcron-module.html#logger
+web2py.gluon.newcron.rangetolist	web2py.gluon.newcron-module.html#rangetolist
+web2py.gluon.portalocker	web2py.gluon.portalocker-module.html
+web2py.gluon.portalocker.__overlapped	web2py.gluon.portalocker-module.html#__overlapped
+web2py.gluon.portalocker.lock	web2py.gluon.portalocker-module.html#lock
+web2py.gluon.portalocker.os_locking	web2py.gluon.portalocker-module.html#os_locking
+web2py.gluon.portalocker.unlock	web2py.gluon.portalocker-module.html#unlock
+web2py.gluon.portalocker.LOCK_NB	web2py.gluon.portalocker-module.html#LOCK_NB
+web2py.gluon.portalocker.LOCK_EX	web2py.gluon.portalocker-module.html#LOCK_EX
+web2py.gluon.portalocker.logger	web2py.gluon.portalocker-module.html#logger
+web2py.gluon.portalocker.LOCK_SH	web2py.gluon.portalocker-module.html#LOCK_SH
+web2py.gluon.reserved_sql_keywords	web2py.gluon.reserved_sql_keywords-module.html
+web2py.gluon.reserved_sql_keywords.POSTGRESQL_NONRESERVED	web2py.gluon.reserved_sql_keywords-module.html#POSTGRESQL_NONRESERVED
+web2py.gluon.reserved_sql_keywords.SQLITE	web2py.gluon.reserved_sql_keywords-module.html#SQLITE
+web2py.gluon.reserved_sql_keywords.POSTGRESQL	web2py.gluon.reserved_sql_keywords-module.html#POSTGRESQL
+web2py.gluon.reserved_sql_keywords.FIREBIRD	web2py.gluon.reserved_sql_keywords-module.html#FIREBIRD
+web2py.gluon.reserved_sql_keywords.MSSQL	web2py.gluon.reserved_sql_keywords-module.html#MSSQL
+web2py.gluon.reserved_sql_keywords.FIREBIRD_NONRESERVED	web2py.gluon.reserved_sql_keywords-module.html#FIREBIRD_NONRESERVED
+web2py.gluon.reserved_sql_keywords.JDBCPOSTGRESQL	web2py.gluon.reserved_sql_keywords-module.html#JDBCPOSTGRESQL
+web2py.gluon.reserved_sql_keywords.__author__	web2py.gluon.reserved_sql_keywords-module.html#__author__
+web2py.gluon.reserved_sql_keywords.INFORMIX	web2py.gluon.reserved_sql_keywords-module.html#INFORMIX
+web2py.gluon.reserved_sql_keywords.COMMON	web2py.gluon.reserved_sql_keywords-module.html#COMMON
+web2py.gluon.reserved_sql_keywords.MYSQL	web2py.gluon.reserved_sql_keywords-module.html#MYSQL
+web2py.gluon.reserved_sql_keywords.ORACLE	web2py.gluon.reserved_sql_keywords-module.html#ORACLE
+web2py.gluon.reserved_sql_keywords.INGRES	web2py.gluon.reserved_sql_keywords-module.html#INGRES
+web2py.gluon.reserved_sql_keywords.DB2	web2py.gluon.reserved_sql_keywords-module.html#DB2
+web2py.gluon.reserved_sql_keywords.ADAPTERS	web2py.gluon.reserved_sql_keywords-module.html#ADAPTERS
+web2py.gluon.reserved_sql_keywords.JDBCSQLITE	web2py.gluon.reserved_sql_keywords-module.html#JDBCSQLITE
+web2py.gluon.restricted	web2py.gluon.restricted-module.html
+web2py.gluon.restricted.restricted	web2py.gluon.restricted-module.html#restricted
+web2py.gluon.restricted.web2py_uuid	web2py.gluon.utils-module.html#web2py_uuid
+web2py.gluon.restricted.snapshot	web2py.gluon.restricted-module.html#snapshot
+web2py.gluon.restricted.logger	web2py.gluon.restricted-module.html#logger
+web2py.gluon.restricted.compile2	web2py.gluon.restricted-module.html#compile2
+web2py.gluon.rewrite	web2py.gluon.rewrite-module.html
+web2py.gluon.rewrite.load	web2py.gluon.rewrite-module.html#load
+web2py.gluon.rewrite.ROUTER_KEYS	web2py.gluon.rewrite-module.html#ROUTER_KEYS
+web2py.gluon.rewrite.params_apps	web2py.gluon.rewrite-module.html#params_apps
+web2py.gluon.rewrite.load_routers	web2py.gluon.rewrite-module.html#load_routers
+web2py.gluon.rewrite.routers	web2py.gluon.rewrite-module.html#routers
+web2py.gluon.rewrite.regex_url_in	web2py.gluon.rewrite-module.html#regex_url_in
+web2py.gluon.rewrite.get_effective_router	web2py.gluon.rewrite-module.html#get_effective_router
+web2py.gluon.rewrite.regex_anything	web2py.gluon.rewrite-module.html#regex_anything
+web2py.gluon.rewrite.read_file	web2py.gluon.fileutils-module.html#read_file
+web2py.gluon.rewrite.url_in	web2py.gluon.rewrite-module.html#url_in
+web2py.gluon.rewrite.map_url_in	web2py.gluon.rewrite-module.html#map_url_in
+web2py.gluon.rewrite.map_url_out	web2py.gluon.rewrite-module.html#map_url_out
+web2py.gluon.rewrite.regex_filter_in	web2py.gluon.rewrite-module.html#regex_filter_in
+web2py.gluon.rewrite.regex_select	web2py.gluon.rewrite-module.html#regex_select
+web2py.gluon.rewrite.regex_at	web2py.gluon.rewrite-module.html#regex_at
+web2py.gluon.rewrite.regex_url	web2py.gluon.rewrite-module.html#regex_url
+web2py.gluon.rewrite.filter_err	web2py.gluon.rewrite-module.html#filter_err
+web2py.gluon.rewrite.regex_args	web2py.gluon.rewrite-module.html#regex_args
+web2py.gluon.rewrite.regex_uri	web2py.gluon.rewrite-module.html#regex_uri
+web2py.gluon.rewrite.params	web2py.gluon.rewrite-module.html#params
+web2py.gluon.rewrite.logger	web2py.gluon.rewrite-module.html#logger
+web2py.gluon.rewrite.regex_filter_out	web2py.gluon.rewrite-module.html#regex_filter_out
+web2py.gluon.rewrite.try_redirect_on_error	web2py.gluon.rewrite-module.html#try_redirect_on_error
+web2py.gluon.rewrite.ROUTER_BASE_KEYS	web2py.gluon.rewrite-module.html#ROUTER_BASE_KEYS
+web2py.gluon.rewrite.abspath	web2py.gluon.fileutils-module.html#abspath
+web2py.gluon.rewrite.url_out	web2py.gluon.rewrite-module.html#url_out
+web2py.gluon.rewrite.try_rewrite_on_error	web2py.gluon.rewrite-module.html#try_rewrite_on_error
+web2py.gluon.rewrite._params_default	web2py.gluon.rewrite-module.html#_params_default
+web2py.gluon.rewrite.filter_url	web2py.gluon.rewrite-module.html#filter_url
+web2py.gluon.rewrite.compile_regex	web2py.gluon.rewrite-module.html#compile_regex
+web2py.gluon.rewrite.thread	web2py.gluon.rewrite-module.html#thread
+web2py.gluon.rewrite.regex_static	web2py.gluon.rewrite-module.html#regex_static
+web2py.gluon.rewrite._router_default	web2py.gluon.rewrite-module.html#_router_default
+web2py.gluon.rewrite.regex_space	web2py.gluon.rewrite-module.html#regex_space
+web2py.gluon.rocket	web2py.gluon.rocket-module.html
+web2py.gluon.rocket.BUF_SIZE	web2py.gluon.rocket-module.html#BUF_SIZE
+web2py.gluon.rocket.demo	web2py.gluon.rocket-module.html#demo
+web2py.gluon.rocket.PY3K	web2py.gluon.rocket-module.html#PY3K
+web2py.gluon.rocket.SERVER_SOFTWARE	web2py.gluon.rocket-module.html#SERVER_SOFTWARE
+web2py.gluon.rocket.HTTP_SERVER_SOFTWARE	web2py.gluon.rocket-module.html#HTTP_SERVER_SOFTWARE
+web2py.gluon.rocket.LOG_LINE	web2py.gluon.rocket-module.html#LOG_LINE
+web2py.gluon.rocket.BASE_ENV	web2py.gluon.rocket-module.html#BASE_ENV
+web2py.gluon.rocket._formatparam	web2py.gluon.rocket-module.html#_formatparam
+web2py.gluon.rocket.HTTP_METHODS	web2py.gluon.rocket-module.html#HTTP_METHODS
+web2py.gluon.rocket.log	web2py.gluon.rocket-module.html#log
+web2py.gluon.rocket.SERVER_NAME	web2py.gluon.rocket-module.html#SERVER_NAME
+web2py.gluon.rocket.NEWLINE	web2py.gluon.rocket-module.html#NEWLINE
+web2py.gluon.rocket.HEADER_RESPONSE	web2py.gluon.rocket-module.html#HEADER_RESPONSE
+web2py.gluon.rocket.DEFAULTS	web2py.gluon.rocket-module.html#DEFAULTS
+web2py.gluon.rocket.b	web2py.gluon.rocket-module.html#b
+web2py.gluon.rocket.THREAD_STOP_CHECK_INTERVAL	web2py.gluon.rocket-module.html#THREAD_STOP_CHECK_INTERVAL
+web2py.gluon.rocket.re_REQUEST_LINE	web2py.gluon.rocket-module.html#re_REQUEST_LINE
+web2py.gluon.rocket.re_SLASH	web2py.gluon.rocket-module.html#re_SLASH
+web2py.gluon.rocket.VERSION	web2py.gluon.rocket-module.html#VERSION
+web2py.gluon.rocket.DEFAULT_LISTEN_QUEUE_SIZE	web2py.gluon.rocket-module.html#DEFAULT_LISTEN_QUEUE_SIZE
+web2py.gluon.rocket.DEFAULT_MIN_THREADS	web2py.gluon.rocket-module.html#DEFAULT_MIN_THREADS
+web2py.gluon.rocket.RESPONSE	web2py.gluon.rocket-module.html#RESPONSE
+web2py.gluon.rocket.get_method	web2py.gluon.rocket-module.html#get_method
+web2py.gluon.rocket.CherryPyWSGIServer	web2py.gluon.rocket-module.html#CherryPyWSGIServer
+web2py.gluon.rocket.DEFAULT_MAX_THREADS	web2py.gluon.rocket-module.html#DEFAULT_MAX_THREADS
+web2py.gluon.rocket.SOCKET_TIMEOUT	web2py.gluon.rocket-module.html#SOCKET_TIMEOUT
+web2py.gluon.rocket.IS_JYTHON	web2py.gluon.rocket-module.html#IS_JYTHON
+web2py.gluon.rocket.IGNORE_ERRORS_ON_CLOSE	web2py.gluon.rocket-module.html#IGNORE_ERRORS_ON_CLOSE
+web2py.gluon.rocket.u	web2py.gluon.rocket-module.html#u
+web2py.gluon.rocket.has_ssl	web2py.gluon.rocket-module.html#has_ssl
+web2py.gluon.rocket.demo_app	web2py.gluon.rocket-module.html#demo_app
+web2py.gluon.rocket._tspecials	web2py.gluon.rocket-module.html#_tspecials
+web2py.gluon.sanitizer	web2py.gluon.sanitizer-module.html
+web2py.gluon.sanitizer.sanitize	web2py.gluon.sanitizer-module.html#sanitize
+web2py.gluon.sanitizer.xssescape	web2py.gluon.sanitizer-module.html#xssescape
+web2py.gluon.serializers	web2py.gluon.serializers-module.html
+web2py.gluon.serializers.xml	web2py.gluon.serializers-module.html#xml
+web2py.gluon.serializers.custom_json	web2py.gluon.serializers-module.html#custom_json
+web2py.gluon.serializers.xml_rec	web2py.gluon.serializers-module.html#xml_rec
+web2py.gluon.serializers.json	web2py.gluon.serializers-module.html#json
+web2py.gluon.serializers.xmlescape	web2py.gluon.html-module.html#xmlescape
+web2py.gluon.serializers.csv	web2py.gluon.serializers-module.html#csv
+web2py.gluon.serializers.rss	web2py.gluon.serializers-module.html#rss
+web2py.gluon.settings	web2py.gluon.settings-module.html
+web2py.gluon.settings.global_settings	web2py.gluon.settings-module.html#global_settings
+web2py.gluon.settings.settings	web2py.gluon.settings-module.html#settings
+web2py.gluon.shell	web2py.gluon.shell-module.html
+web2py.gluon.shell.exec_environment	web2py.gluon.shell-module.html#exec_environment
+web2py.gluon.shell.build_environment	web2py.gluon.compileapp-module.html#build_environment
+web2py.gluon.shell.get_usage	web2py.gluon.shell-module.html#get_usage
+web2py.gluon.shell.w2p_unpack	web2py.gluon.fileutils-module.html#w2p_unpack
+web2py.gluon.shell.web2py_uuid	web2py.gluon.utils-module.html#web2py_uuid
+web2py.gluon.shell.exec_pythonrc	web2py.gluon.shell-module.html#exec_pythonrc
+web2py.gluon.shell.execute_from_command_line	web2py.gluon.shell-module.html#execute_from_command_line
+web2py.gluon.shell.parse_path_info	web2py.gluon.shell-module.html#parse_path_info
+web2py.gluon.shell.env	web2py.gluon.shell-module.html#env
+web2py.gluon.shell.test	web2py.gluon.shell-module.html#test
+web2py.gluon.shell.logger	web2py.gluon.shell-module.html#logger
+web2py.gluon.shell.run	web2py.gluon.shell-module.html#run
+web2py.gluon.shell.read_pyc	web2py.gluon.compileapp-module.html#read_pyc
+web2py.gluon.shell.die	web2py.gluon.shell-module.html#die
+web2py.gluon.shell.run_models_in	web2py.gluon.compileapp-module.html#run_models_in
+web2py.gluon.sql	web2py.gluon.sql-module.html
+web2py.gluon.sql.drivers	web2py.gluon.sql-module.html#drivers
+web2py.gluon.sqlhtml	web2py.gluon.sqlhtml-module.html
+web2py.gluon.sqlhtml.table_field	web2py.gluon.sqlhtml-module.html#table_field
+web2py.gluon.sqlhtml.safe_int	web2py.gluon.sqlhtml-module.html#safe_int
+web2py.gluon.sqlhtml.form_factory	web2py.gluon.sqlhtml-module.html#form_factory
+web2py.gluon.sqlhtml.represent	web2py.gluon.sqlhtml-module.html#represent
+web2py.gluon.sqlhtml.safe_float	web2py.gluon.sqlhtml-module.html#safe_float
+web2py.gluon.sqlhtml.Url	web2py.gluon.html-module.html#URL
+web2py.gluon.sqlhtml.md5_hash	web2py.gluon.utils-module.html#md5_hash
+web2py.gluon.sqlhtml.widget_class	web2py.gluon.sqlhtml-module.html#widget_class
+web2py.gluon.storage	web2py.gluon.storage-module.html
+web2py.gluon.storage.load_storage	web2py.gluon.storage-module.html#load_storage
+web2py.gluon.storage.save_storage	web2py.gluon.storage-module.html#save_storage
+web2py.gluon.streamer	web2py.gluon.streamer-module.html
+web2py.gluon.streamer.contenttype	web2py.gluon.contenttype-module.html#contenttype
+web2py.gluon.streamer.DEFAULT_CHUNK_SIZE	web2py.gluon.streamer-module.html#DEFAULT_CHUNK_SIZE
+web2py.gluon.streamer.regex_start_range	web2py.gluon.streamer-module.html#regex_start_range
+web2py.gluon.streamer.streamer	web2py.gluon.streamer-module.html#streamer
+web2py.gluon.streamer.regex_stop_range	web2py.gluon.streamer-module.html#regex_stop_range
+web2py.gluon.streamer.stream_file_or_304_or_206	web2py.gluon.streamer-module.html#stream_file_or_304_or_206
+web2py.gluon.template	web2py.gluon.template-module.html
+web2py.gluon.template.render	web2py.gluon.template-module.html#render
+web2py.gluon.template.parse_template	web2py.gluon.template-module.html#parse_template
+web2py.gluon.template.get_parsed	web2py.gluon.template-module.html#get_parsed
+web2py.gluon.tools	web2py.gluon.tools-module.html
+web2py.gluon.tools.validators	web2py.gluon.tools-module.html#validators
+web2py.gluon.tools.geocode	web2py.gluon.tools-module.html#geocode
+web2py.gluon.tools.logger	web2py.gluon.tools-module.html#logger
+web2py.gluon.tools.regex_geocode	web2py.gluon.tools-module.html#regex_geocode
+web2py.gluon.tools.ON	web2py.gluon.tools-module.html#ON
+web2py.gluon.tools.read_file	web2py.gluon.fileutils-module.html#read_file
+web2py.gluon.tools.contenttype	web2py.gluon.contenttype-module.html#contenttype
+web2py.gluon.tools.prettydate	web2py.gluon.tools-module.html#prettydate
+web2py.gluon.tools.current	web2py.gluon.tools-module.html#current
+web2py.gluon.tools.universal_caller	web2py.gluon.tools-module.html#universal_caller
+web2py.gluon.tools.test_thread_separation	web2py.gluon.tools-module.html#test_thread_separation
+web2py.gluon.tools.DEFAULT	web2py.gluon.tools-module.html#DEFAULT
+web2py.gluon.tools.web2py_uuid	web2py.gluon.utils-module.html#web2py_uuid
+web2py.gluon.tools.TAG	web2py.gluon.tools-module.html#TAG
+web2py.gluon.tools.completion	web2py.gluon.tools-module.html#completion
+web2py.gluon.tools.fetch	web2py.gluon.tools-module.html#fetch
+web2py.gluon.tools.call_or_redirect	web2py.gluon.tools-module.html#call_or_redirect
+web2py.gluon.tools.addrow	web2py.gluon.tools-module.html#addrow
+web2py.gluon.tools.callback	web2py.gluon.tools-module.html#callback
+web2py.gluon.utils	web2py.gluon.utils-module.html
+web2py.gluon.utils.initialize_urandom	web2py.gluon.utils-module.html#initialize_urandom
+web2py.gluon.utils.ctokens	web2py.gluon.utils-module.html#ctokens
+web2py.gluon.utils.hmac_hash	web2py.gluon.utils-module.html#hmac_hash
+web2py.gluon.utils.get_digest	web2py.gluon.utils-module.html#get_digest
+web2py.gluon.utils.web2py_uuid	web2py.gluon.utils-module.html#web2py_uuid
+web2py.gluon.utils.md5_hash	web2py.gluon.utils-module.html#md5_hash
+web2py.gluon.utils.logger	web2py.gluon.utils-module.html#logger
+web2py.gluon.utils.simple_hash	web2py.gluon.utils-module.html#simple_hash
+web2py.gluon.validators	web2py.gluon.validators-module.html
+web2py.gluon.validators.unicode_to_ascii_url	web2py.gluon.validators-module.html#unicode_to_ascii_url
+web2py.gluon.validators.unofficial_url_schemes	web2py.gluon.validators-module.html#unofficial_url_schemes
+web2py.gluon.validators.http_schemes	web2py.gluon.validators-module.html#http_schemes
+web2py.gluon.validators.regex1	web2py.gluon.validators-module.html#regex1
+web2py.gluon.validators.regex2	web2py.gluon.validators-module.html#regex2
+web2py.gluon.validators.simple_hash	web2py.gluon.utils-module.html#simple_hash
+web2py.gluon.validators.hmac_hash	web2py.gluon.utils-module.html#hmac_hash
+web2py.gluon.validators.unicode_to_ascii_authority	web2py.gluon.validators-module.html#unicode_to_ascii_authority
+web2py.gluon.validators.regex_time	web2py.gluon.validators-module.html#regex_time
+web2py.gluon.validators.label_split_regex	web2py.gluon.validators-module.html#label_split_regex
+web2py.gluon.validators.url_split_regex	web2py.gluon.validators-module.html#url_split_regex
+web2py.gluon.validators.all_url_schemes	web2py.gluon.validators-module.html#all_url_schemes
+web2py.gluon.validators.official_url_schemes	web2py.gluon.validators-module.html#official_url_schemes
+web2py.gluon.validators.is_empty	web2py.gluon.validators-module.html#is_empty
+web2py.gluon.validators.urlify	web2py.gluon.validators-module.html#urlify
+web2py.gluon.validators.translate	web2py.gluon.validators-module.html#translate
+web2py.gluon.validators.options_sorter	web2py.gluon.validators-module.html#options_sorter
+web2py.gluon.validators.escape_unicode	web2py.gluon.validators-module.html#escape_unicode
+web2py.gluon.validators.official_top_level_domains	web2py.gluon.validators-module.html#official_top_level_domains
+web2py.gluon.widget	web2py.gluon.widget-module.html
+web2py.gluon.widget.ProgramAuthor	web2py.gluon.widget-module.html#ProgramAuthor
+web2py.gluon.widget.try_start_browser	web2py.gluon.widget-module.html#try_start_browser
+web2py.gluon.widget.read_file	web2py.gluon.fileutils-module.html#read_file
+web2py.gluon.widget.write_file	web2py.gluon.fileutils-module.html#write_file
+web2py.gluon.widget.run	web2py.gluon.shell-module.html#run
+web2py.gluon.widget.console	web2py.gluon.widget-module.html#console
+web2py.gluon.widget.ProgramVersion	web2py.gluon.widget-module.html#ProgramVersion
+web2py.gluon.widget.start	web2py.gluon.widget-module.html#start
+web2py.gluon.widget.w2p_pack	web2py.gluon.fileutils-module.html#w2p_pack
+web2py.gluon.widget.test	web2py.gluon.shell-module.html#test
+web2py.gluon.widget.logger	web2py.gluon.widget-module.html#logger
+web2py.gluon.widget.presentation	web2py.gluon.widget-module.html#presentation
+web2py.gluon.widget.msg	web2py.gluon.widget-module.html#msg
+web2py.gluon.widget.start_browser	web2py.gluon.widget-module.html#start_browser
+web2py.gluon.widget.ProgramName	web2py.gluon.widget-module.html#ProgramName
+web2py.gluon.widget.ProgramInfo	web2py.gluon.widget-module.html#ProgramInfo
+web2py.gluon.winservice	web2py.gluon.winservice-module.html
+web2py.gluon.winservice.web2py_windows_service_handler	web2py.gluon.winservice-module.html#web2py_windows_service_handler
+web2py.gluon.xmlrpc	web2py.gluon.xmlrpc-module.html
+web2py.gluon.xmlrpc.handler	web2py.gluon.xmlrpc-module.html#handler
+datetime.date	datetime.date-class.html
+datetime.date.__str__	datetime.date-class.html#__str__
+datetime.date.__getattribute__	datetime.date-class.html#__getattribute__
+datetime.date.__radd__	datetime.date-class.html#__radd__
+datetime.date.toordinal	datetime.date-class.html#toordinal
+datetime.date.__rsub__	datetime.date-class.html#__rsub__
+datetime.date.year	datetime.date-class.html#year
+datetime.date.__lt__	datetime.date-class.html#__lt__
+datetime.date.isocalendar	datetime.date-class.html#isocalendar
+datetime.date.__new__	datetime.date-class.html#__new__
+datetime.date.min	datetime.date-class.html#min
+datetime.date.strftime	datetime.date-class.html#strftime
+datetime.date.timetuple	datetime.date-class.html#timetuple
+datetime.date.today	datetime.date-class.html#today
+datetime.date.__repr__	datetime.date-class.html#__repr__
+datetime.date.isoformat	datetime.date-class.html#isoformat
+datetime.date.__ne__	datetime.date-class.html#__ne__
+datetime.date.month	datetime.date-class.html#month
+datetime.date.max	datetime.date-class.html#max
+datetime.date.isoweekday	datetime.date-class.html#isoweekday
+datetime.date.__add__	datetime.date-class.html#__add__
+datetime.date.__gt__	datetime.date-class.html#__gt__
+datetime.date.__reduce__	datetime.date-class.html#__reduce__
+datetime.date.replace	datetime.date-class.html#replace
+datetime.date.__eq__	datetime.date-class.html#__eq__
+datetime.date.day	datetime.date-class.html#day
+datetime.date.ctime	datetime.date-class.html#ctime
+datetime.date.fromordinal	datetime.date-class.html#fromordinal
+datetime.date.fromtimestamp	datetime.date-class.html#fromtimestamp
+datetime.date.__le__	datetime.date-class.html#__le__
+datetime.date.weekday	datetime.date-class.html#weekday
+datetime.date.__hash__	datetime.date-class.html#__hash__
+datetime.date.__sub__	datetime.date-class.html#__sub__
+datetime.date.resolution	datetime.date-class.html#resolution
+datetime.date.__ge__	datetime.date-class.html#__ge__
+datetime.datetime	datetime.datetime-class.html
+datetime.date.weekday	datetime.date-class.html#weekday
+datetime.datetime.__rsub__	datetime.datetime-class.html#__rsub__
+datetime.datetime.__str__	datetime.datetime-class.html#__str__
+datetime.datetime.__reduce__	datetime.datetime-class.html#__reduce__
+datetime.datetime.__radd__	datetime.datetime-class.html#__radd__
+datetime.datetime.utctimetuple	datetime.datetime-class.html#utctimetuple
+datetime.datetime.second	datetime.datetime-class.html#second
+datetime.date.toordinal	datetime.date-class.html#toordinal
+datetime.datetime.utcnow	datetime.datetime-class.html#utcnow
+datetime.date.year	datetime.date-class.html#year
+datetime.datetime.__lt__	datetime.datetime-class.html#__lt__
+datetime.date.isocalendar	datetime.date-class.html#isocalendar
+datetime.datetime.now	datetime.datetime-class.html#now
+datetime.datetime.__new__	datetime.datetime-class.html#__new__
+datetime.datetime.min	datetime.datetime-class.html#min
+datetime.datetime.dst	datetime.datetime-class.html#dst
+datetime.datetime.astimezone	datetime.datetime-class.html#astimezone
+datetime.datetime.strptime	datetime.datetime-class.html#strptime
+datetime.datetime.utcfromtimestamp	datetime.datetime-class.html#utcfromtimestamp
+datetime.date.strftime	datetime.date-class.html#strftime
+datetime.datetime.combine	datetime.datetime-class.html#combine
+datetime.datetime.timetuple	datetime.datetime-class.html#timetuple
+datetime.datetime.max	datetime.datetime-class.html#max
+datetime.datetime.tzinfo	datetime.datetime-class.html#tzinfo
+datetime.date.today	datetime.date-class.html#today
+datetime.datetime.__repr__	datetime.datetime-class.html#__repr__
+datetime.datetime.__ne__	datetime.datetime-class.html#__ne__
+datetime.date.month	datetime.date-class.html#month
+datetime.datetime.__getattribute__	datetime.datetime-class.html#__getattribute__
+datetime.date.isoweekday	datetime.date-class.html#isoweekday
+datetime.datetime.replace	datetime.datetime-class.html#replace
+datetime.datetime.utcoffset	datetime.datetime-class.html#utcoffset
+datetime.datetime.microsecond	datetime.datetime-class.html#microsecond
+datetime.datetime.__add__	datetime.datetime-class.html#__add__
+datetime.datetime.__gt__	datetime.datetime-class.html#__gt__
+datetime.datetime.date	datetime.datetime-class.html#date
+datetime.datetime.isoformat	datetime.datetime-class.html#isoformat
+datetime.datetime.__eq__	datetime.datetime-class.html#__eq__
+datetime.date.day	datetime.date-class.html#day
+datetime.datetime.minute	datetime.datetime-class.html#minute
+datetime.datetime.ctime	datetime.datetime-class.html#ctime
+datetime.datetime.hour	datetime.datetime-class.html#hour
+datetime.date.fromordinal	datetime.date-class.html#fromordinal
+datetime.datetime.fromtimestamp	datetime.datetime-class.html#fromtimestamp
+datetime.datetime.__le__	datetime.datetime-class.html#__le__
+datetime.datetime.tzname	datetime.datetime-class.html#tzname
+datetime.datetime.time	datetime.datetime-class.html#time
+datetime.datetime.__hash__	datetime.datetime-class.html#__hash__
+datetime.datetime.__sub__	datetime.datetime-class.html#__sub__
+datetime.datetime.timetz	datetime.datetime-class.html#timetz
+datetime.datetime.resolution	datetime.datetime-class.html#resolution
+datetime.datetime.__ge__	datetime.datetime-class.html#__ge__
+datetime.time	datetime.time-class.html
+datetime.time.__str__	datetime.time-class.html#__str__
+datetime.time.__getattribute__	datetime.time-class.html#__getattribute__
+datetime.time.isoformat	datetime.time-class.html#isoformat
+datetime.time.second	datetime.time-class.html#second
+datetime.time.__lt__	datetime.time-class.html#__lt__
+datetime.time.__new__	datetime.time-class.html#__new__
+datetime.time.min	datetime.time-class.html#min
+datetime.time.dst	datetime.time-class.html#dst
+datetime.time.strftime	datetime.time-class.html#strftime
+datetime.time.tzinfo	datetime.time-class.html#tzinfo
+datetime.time.__repr__	datetime.time-class.html#__repr__
+datetime.time.__ne__	datetime.time-class.html#__ne__
+datetime.time.max	datetime.time-class.html#max
+datetime.time.utcoffset	datetime.time-class.html#utcoffset
+datetime.time.microsecond	datetime.time-class.html#microsecond
+datetime.time.__gt__	datetime.time-class.html#__gt__
+datetime.time.__reduce__	datetime.time-class.html#__reduce__
+datetime.time.replace	datetime.time-class.html#replace
+datetime.time.__eq__	datetime.time-class.html#__eq__
+datetime.time.minute	datetime.time-class.html#minute
+datetime.time.__nonzero__	datetime.time-class.html#__nonzero__
+datetime.time.hour	datetime.time-class.html#hour
+datetime.time.__le__	datetime.time-class.html#__le__
+datetime.time.tzname	datetime.time-class.html#tzname
+datetime.time.__hash__	datetime.time-class.html#__hash__
+datetime.time.resolution	datetime.time-class.html#resolution
+datetime.time.__ge__	datetime.time-class.html#__ge__
+exceptions.Exception	exceptions.Exception-class.html
+exceptions.Exception.__init__	exceptions.Exception-class.html#__init__
+exceptions.Exception.__new__	exceptions.Exception-class.html#__new__
+psycopg2.DataError	psycopg2.DataError-class.html
+psycopg2.DatabaseError	psycopg2.DatabaseError-class.html
+psycopg2.Error	psycopg2.Error-class.html
+psycopg2.IntegrityError	psycopg2.IntegrityError-class.html
+psycopg2.InterfaceError	psycopg2.InterfaceError-class.html
+psycopg2.InternalError	psycopg2.InternalError-class.html
+psycopg2.NotSupportedError	psycopg2.NotSupportedError-class.html
+psycopg2.OperationalError	psycopg2.OperationalError-class.html
+psycopg2.ProgrammingError	psycopg2.ProgrammingError-class.html
+psycopg2.Warning	psycopg2.Warning-class.html
+psycopg2.tz.FixedOffsetTimezone	psycopg2.tz.FixedOffsetTimezone-class.html
+psycopg2.tz.FixedOffsetTimezone.dst	psycopg2.tz.FixedOffsetTimezone-class.html#dst
+psycopg2.tz.FixedOffsetTimezone._name	psycopg2.tz.FixedOffsetTimezone-class.html#_name
+psycopg2.tz.FixedOffsetTimezone._offset	psycopg2.tz.FixedOffsetTimezone-class.html#_offset
+psycopg2.tz.FixedOffsetTimezone.utcoffset	psycopg2.tz.FixedOffsetTimezone-class.html#utcoffset
+psycopg2.tz.FixedOffsetTimezone.tzname	psycopg2.tz.FixedOffsetTimezone-class.html#tzname
+psycopg2.tz.FixedOffsetTimezone.__init__	psycopg2.tz.FixedOffsetTimezone-class.html#__init__
+psycopg2.tz.LocalTimezone	psycopg2.tz.LocalTimezone-class.html
+psycopg2.tz.LocalTimezone._isdst	psycopg2.tz.LocalTimezone-class.html#_isdst
+psycopg2.tz.LocalTimezone.utcoffset	psycopg2.tz.LocalTimezone-class.html#utcoffset
+psycopg2.tz.LocalTimezone.tzname	psycopg2.tz.LocalTimezone-class.html#tzname
+psycopg2.tz.LocalTimezone.dst	psycopg2.tz.LocalTimezone-class.html#dst
+web2py.gluon.cache.Cache	web2py.gluon.cache.Cache-class.html
+web2py.gluon.cache.Cache.__call__	web2py.gluon.cache.Cache-class.html#__call__
+web2py.gluon.cache.Cache.__init__	web2py.gluon.cache.Cache-class.html#__init__
+web2py.gluon.cache.CacheAbstract	web2py.gluon.cache.CacheAbstract-class.html
+web2py.gluon.cache.CacheAbstract._clear	web2py.gluon.cache.CacheAbstract-class.html#_clear
+web2py.gluon.cache.CacheAbstract.clear	web2py.gluon.cache.CacheAbstract-class.html#clear
+web2py.gluon.cache.CacheAbstract.increment	web2py.gluon.cache.CacheAbstract-class.html#increment
+web2py.gluon.cache.CacheAbstract.__call__	web2py.gluon.cache.CacheAbstract-class.html#__call__
+web2py.gluon.cache.CacheAbstract.cache_stats_name	web2py.gluon.cache.CacheAbstract-class.html#cache_stats_name
+web2py.gluon.cache.CacheAbstract.__init__	web2py.gluon.cache.CacheAbstract-class.html#__init__
+web2py.gluon.cache.CacheInRam	web2py.gluon.cache.CacheInRam-class.html
+web2py.gluon.cache.CacheInRam.meta_storage	web2py.gluon.cache.CacheInRam-class.html#meta_storage
+web2py.gluon.cache.CacheAbstract._clear	web2py.gluon.cache.CacheAbstract-class.html#_clear
+web2py.gluon.cache.CacheInRam.clear	web2py.gluon.cache.CacheInRam-class.html#clear
+web2py.gluon.cache.CacheInRam.locker	web2py.gluon.cache.CacheInRam-class.html#locker
+web2py.gluon.cache.CacheInRam.increment	web2py.gluon.cache.CacheInRam-class.html#increment
+web2py.gluon.cache.CacheInRam.__call__	web2py.gluon.cache.CacheInRam-class.html#__call__
+web2py.gluon.cache.CacheAbstract.cache_stats_name	web2py.gluon.cache.CacheAbstract-class.html#cache_stats_name
+web2py.gluon.cache.CacheInRam.__init__	web2py.gluon.cache.CacheInRam-class.html#__init__
+web2py.gluon.cache.CacheOnDisk	web2py.gluon.cache.CacheOnDisk-class.html
+web2py.gluon.cache.CacheAbstract._clear	web2py.gluon.cache.CacheAbstract-class.html#_clear
+web2py.gluon.cache.CacheOnDisk.clear	web2py.gluon.cache.CacheOnDisk-class.html#clear
+web2py.gluon.cache.CacheOnDisk.__call__	web2py.gluon.cache.CacheOnDisk-class.html#__call__
+web2py.gluon.cache.CacheOnDisk.increment	web2py.gluon.cache.CacheOnDisk-class.html#increment
+web2py.gluon.cache.CacheOnDisk.speedup_checks	web2py.gluon.cache.CacheOnDisk-class.html#speedup_checks
+web2py.gluon.cache.CacheAbstract.cache_stats_name	web2py.gluon.cache.CacheAbstract-class.html#cache_stats_name
+web2py.gluon.cache.CacheOnDisk.__init__	web2py.gluon.cache.CacheOnDisk-class.html#__init__
+web2py.gluon.compileapp.LoadFactory	web2py.gluon.compileapp.LoadFactory-class.html
+web2py.gluon.compileapp.LoadFactory.__call__	web2py.gluon.compileapp.LoadFactory-class.html#__call__
+web2py.gluon.compileapp.LoadFactory.__init__	web2py.gluon.compileapp.LoadFactory-class.html#__init__
+web2py.gluon.compileapp.mybuiltin	web2py.gluon.compileapp.mybuiltin-class.html
+web2py.gluon.compileapp.mybuiltin.__getitem__	web2py.gluon.compileapp.mybuiltin-class.html#__getitem__
+web2py.gluon.compileapp.mybuiltin.__setitem__	web2py.gluon.compileapp.mybuiltin-class.html#__setitem__
+web2py.gluon.contrib.pymysql.DBAPISet	web2py.gluon.contrib.pymysql.DBAPISet-class.html
+web2py.gluon.contrib.pymysql.DBAPISet.__ne__	web2py.gluon.contrib.pymysql.DBAPISet-class.html#__ne__
+web2py.gluon.contrib.pymysql.DBAPISet.__eq__	web2py.gluon.contrib.pymysql.DBAPISet-class.html#__eq__
+web2py.gluon.contrib.pymysql.DBAPISet.__hash__	web2py.gluon.contrib.pymysql.DBAPISet-class.html#__hash__
+web2py.gluon.contrib.pymysql.err.DataError	web2py.gluon.contrib.pymysql.err.DataError-class.html
+exceptions.Exception.__init__	exceptions.Exception-class.html#__init__
+exceptions.Exception.__new__	exceptions.Exception-class.html#__new__
+web2py.gluon.contrib.pymysql.err.DatabaseError	web2py.gluon.contrib.pymysql.err.DatabaseError-class.html
+exceptions.Exception.__init__	exceptions.Exception-class.html#__init__
+exceptions.Exception.__new__	exceptions.Exception-class.html#__new__
+web2py.gluon.contrib.pymysql.err.Error	web2py.gluon.contrib.pymysql.err.Error-class.html
+exceptions.Exception.__init__	exceptions.Exception-class.html#__init__
+exceptions.Exception.__new__	exceptions.Exception-class.html#__new__
+web2py.gluon.contrib.pymysql.err.IntegrityError	web2py.gluon.contrib.pymysql.err.IntegrityError-class.html
+exceptions.Exception.__init__	exceptions.Exception-class.html#__init__
+exceptions.Exception.__new__	exceptions.Exception-class.html#__new__
+web2py.gluon.contrib.pymysql.err.InterfaceError	web2py.gluon.contrib.pymysql.err.InterfaceError-class.html
+exceptions.Exception.__init__	exceptions.Exception-class.html#__init__
+exceptions.Exception.__new__	exceptions.Exception-class.html#__new__
+web2py.gluon.contrib.pymysql.err.InternalError	web2py.gluon.contrib.pymysql.err.InternalError-class.html
+exceptions.Exception.__init__	exceptions.Exception-class.html#__init__
+exceptions.Exception.__new__	exceptions.Exception-class.html#__new__
+web2py.gluon.contrib.pymysql.err.NotSupportedError	web2py.gluon.contrib.pymysql.err.NotSupportedError-class.html
+exceptions.Exception.__init__	exceptions.Exception-class.html#__init__
+exceptions.Exception.__new__	exceptions.Exception-class.html#__new__
+web2py.gluon.contrib.pymysql.err.OperationalError	web2py.gluon.contrib.pymysql.err.OperationalError-class.html
+exceptions.Exception.__init__	exceptions.Exception-class.html#__init__
+exceptions.Exception.__new__	exceptions.Exception-class.html#__new__
+web2py.gluon.contrib.pymysql.err.ProgrammingError	web2py.gluon.contrib.pymysql.err.ProgrammingError-class.html
+exceptions.Exception.__init__	exceptions.Exception-class.html#__init__
+exceptions.Exception.__new__	exceptions.Exception-class.html#__new__
+web2py.gluon.contrib.pymysql.err.Warning	web2py.gluon.contrib.pymysql.err.Warning-class.html
+web2py.gluon.custom_import._BaseImporter	web2py.gluon.custom_import._BaseImporter-class.html
+web2py.gluon.custom_import._BaseImporter.begin	web2py.gluon.custom_import._BaseImporter-class.html#begin
+web2py.gluon.custom_import._BaseImporter.end	web2py.gluon.custom_import._BaseImporter-class.html#end
+web2py.gluon.custom_import._BaseImporter.__call__	web2py.gluon.custom_import._BaseImporter-class.html#__call__
+web2py.gluon.custom_import._DateTrackerImporter	web2py.gluon.custom_import._DateTrackerImporter-class.html
+web2py.gluon.custom_import._DateTrackerImporter._get_module_file	web2py.gluon.custom_import._DateTrackerImporter-class.html#_get_module_file
+web2py.gluon.custom_import._DateTrackerImporter.begin	web2py.gluon.custom_import._DateTrackerImporter-class.html#begin
+web2py.gluon.custom_import._DateTrackerImporter.end	web2py.gluon.custom_import._DateTrackerImporter-class.html#end
+web2py.gluon.custom_import._DateTrackerImporter._update_dates	web2py.gluon.custom_import._DateTrackerImporter-class.html#_update_dates
+web2py.gluon.custom_import._DateTrackerImporter._PACKAGE_PATH_SUFFIX	web2py.gluon.custom_import._DateTrackerImporter-class.html#_PACKAGE_PATH_SUFFIX
+web2py.gluon.custom_import._DateTrackerImporter.__call__	web2py.gluon.custom_import._DateTrackerImporter-class.html#__call__
+web2py.gluon.custom_import._DateTrackerImporter._reload_check	web2py.gluon.custom_import._DateTrackerImporter-class.html#_reload_check
+web2py.gluon.custom_import._DateTrackerImporter.__init__	web2py.gluon.custom_import._DateTrackerImporter-class.html#__init__
+web2py.gluon.custom_import._Web2pyDateTrackerImporter	web2py.gluon.custom_import._Web2pyDateTrackerImporter-class.html
+web2py.gluon.custom_import._Web2pyImporter._matchAppDir	web2py.gluon.custom_import._Web2pyImporter-class.html#_matchAppDir
+web2py.gluon.custom_import._Web2pyImporter._Web2pyImporter__import__dot	web2py.gluon.custom_import._Web2pyImporter-class.html#_Web2pyImporter__import__dot
+web2py.gluon.custom_import._DateTrackerImporter.begin	web2py.gluon.custom_import._DateTrackerImporter-class.html#begin
+web2py.gluon.custom_import._DateTrackerImporter.end	web2py.gluon.custom_import._DateTrackerImporter-class.html#end
+web2py.gluon.custom_import._DateTrackerImporter._get_module_file	web2py.gluon.custom_import._DateTrackerImporter-class.html#_get_module_file
+web2py.gluon.custom_import._DateTrackerImporter._update_dates	web2py.gluon.custom_import._DateTrackerImporter-class.html#_update_dates
+web2py.gluon.custom_import._DateTrackerImporter._PACKAGE_PATH_SUFFIX	web2py.gluon.custom_import._DateTrackerImporter-class.html#_PACKAGE_PATH_SUFFIX
+web2py.gluon.custom_import._Web2pyImporter._RE_ESCAPED_PATH_SEP	web2py.gluon.custom_import._Web2pyImporter-class.html#_RE_ESCAPED_PATH_SEP
+web2py.gluon.custom_import._Web2pyImporter.__call__	web2py.gluon.custom_import._Web2pyImporter-class.html#__call__
+web2py.gluon.custom_import._DateTrackerImporter._reload_check	web2py.gluon.custom_import._DateTrackerImporter-class.html#_reload_check
+web2py.gluon.custom_import._Web2pyImporter.__init__	web2py.gluon.custom_import._Web2pyImporter-class.html#__init__
+web2py.gluon.custom_import._Web2pyImporter	web2py.gluon.custom_import._Web2pyImporter-class.html
+web2py.gluon.custom_import._Web2pyImporter._matchAppDir	web2py.gluon.custom_import._Web2pyImporter-class.html#_matchAppDir
+web2py.gluon.custom_import._Web2pyImporter._Web2pyImporter__import__dot	web2py.gluon.custom_import._Web2pyImporter-class.html#_Web2pyImporter__import__dot
+web2py.gluon.custom_import._BaseImporter.begin	web2py.gluon.custom_import._BaseImporter-class.html#begin
+web2py.gluon.custom_import._BaseImporter.end	web2py.gluon.custom_import._BaseImporter-class.html#end
+web2py.gluon.custom_import._Web2pyImporter.__import__dot	web2py.gluon.custom_import._Web2pyImporter-class.html#__import__dot
+web2py.gluon.custom_import._Web2pyImporter._RE_ESCAPED_PATH_SEP	web2py.gluon.custom_import._Web2pyImporter-class.html#_RE_ESCAPED_PATH_SEP
+web2py.gluon.custom_import._Web2pyImporter.__call__	web2py.gluon.custom_import._Web2pyImporter-class.html#__call__
+web2py.gluon.custom_import._Web2pyImporter.__init__	web2py.gluon.custom_import._Web2pyImporter-class.html#__init__
+web2py.gluon.dal.BaseAdapter	web2py.gluon.dal.BaseAdapter-class.html
+web2py.gluon.dal.BaseAdapter.represent	web2py.gluon.dal.BaseAdapter-class.html#represent
+web2py.gluon.dal.BaseAdapter.log_execute	web2py.gluon.dal.BaseAdapter-class.html#log_execute
+web2py.gluon.dal.BaseAdapter.select_limitby	web2py.gluon.dal.BaseAdapter-class.html#select_limitby
+web2py.gluon.dal.BaseAdapter._truncate	web2py.gluon.dal.BaseAdapter-class.html#_truncate
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.BaseAdapter.LEFT_JOIN	web2py.gluon.dal.BaseAdapter-class.html#LEFT_JOIN
+web2py.gluon.dal.BaseAdapter.distributed_transaction_begin	web2py.gluon.dal.BaseAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.BaseAdapter.GT	web2py.gluon.dal.BaseAdapter-class.html#GT
+web2py.gluon.dal.BaseAdapter.rollback	web2py.gluon.dal.BaseAdapter-class.html#rollback
+web2py.gluon.dal.BaseAdapter.ON	web2py.gluon.dal.BaseAdapter-class.html#ON
+web2py.gluon.dal.BaseAdapter.ALLOW_NULL	web2py.gluon.dal.BaseAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.BaseAdapter.maxcharlength	web2py.gluon.dal.BaseAdapter-class.html#maxcharlength
+web2py.gluon.dal.BaseAdapter.GE	web2py.gluon.dal.BaseAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.BaseAdapter._drop	web2py.gluon.dal.BaseAdapter-class.html#_drop
+web2py.gluon.dal.BaseAdapter.integrity_error_class	web2py.gluon.dal.BaseAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.BaseAdapter._select	web2py.gluon.dal.BaseAdapter-class.html#_select
+web2py.gluon.dal.BaseAdapter.insert	web2py.gluon.dal.BaseAdapter-class.html#insert
+web2py.gluon.dal.BaseAdapter.execute	web2py.gluon.dal.BaseAdapter-class.html#execute
+web2py.gluon.dal.BaseAdapter.drop	web2py.gluon.dal.BaseAdapter-class.html#drop
+web2py.gluon.dal.BaseAdapter.migrate_table	web2py.gluon.dal.BaseAdapter-class.html#migrate_table
+web2py.gluon.dal.BaseAdapter.concat_add	web2py.gluon.dal.BaseAdapter-class.html#concat_add
+web2py.gluon.dal.BaseAdapter._insert	web2py.gluon.dal.BaseAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.BaseAdapter.support_distributed_transaction	web2py.gluon.dal.BaseAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.BaseAdapter.OR	web2py.gluon.dal.BaseAdapter-class.html#OR
+web2py.gluon.dal.BaseAdapter.file_delete	web2py.gluon.dal.BaseAdapter-class.html#file_delete
+web2py.gluon.dal.BaseAdapter.NOT_NULL	web2py.gluon.dal.BaseAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.BaseAdapter.close	web2py.gluon.dal.BaseAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.BaseAdapter.rowslice	web2py.gluon.dal.BaseAdapter-class.html#rowslice
+web2py.gluon.dal.BaseAdapter.create_sequence_and_triggers	web2py.gluon.dal.BaseAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.BaseAdapter.rollback_prepared	web2py.gluon.dal.BaseAdapter-class.html#rollback_prepared
+web2py.gluon.dal.BaseAdapter.commit_prepared	web2py.gluon.dal.BaseAdapter-class.html#commit_prepared
+web2py.gluon.dal.BaseAdapter.EQ	web2py.gluon.dal.BaseAdapter-class.html#EQ
+web2py.gluon.dal.BaseAdapter.AND	web2py.gluon.dal.BaseAdapter-class.html#AND
+web2py.gluon.dal.BaseAdapter.uploads_in_blob	web2py.gluon.dal.BaseAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.BaseAdapter.NOT	web2py.gluon.dal.BaseAdapter-class.html#NOT
+web2py.gluon.dal.BaseAdapter.commit	web2py.gluon.dal.BaseAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.BaseAdapter.STARTSWITH	web2py.gluon.dal.BaseAdapter-class.html#STARTSWITH
+web2py.gluon.dal.BaseAdapter.SUB	web2py.gluon.dal.BaseAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.BaseAdapter._delete	web2py.gluon.dal.BaseAdapter-class.html#_delete
+web2py.gluon.dal.BaseAdapter.BELONGS	web2py.gluon.dal.BaseAdapter-class.html#BELONGS
+web2py.gluon.dal.BaseAdapter.MUL	web2py.gluon.dal.BaseAdapter-class.html#MUL
+web2py.gluon.dal.BaseAdapter.select	web2py.gluon.dal.BaseAdapter-class.html#select
+web2py.gluon.dal.BaseAdapter.PRIMARY_KEY	web2py.gluon.dal.BaseAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.BaseAdapter.prepare	web2py.gluon.dal.BaseAdapter-class.html#prepare
+web2py.gluon.dal.BaseAdapter.NE	web2py.gluon.dal.BaseAdapter-class.html#NE
+web2py.gluon.dal.BaseAdapter.SUBSTRING	web2py.gluon.dal.BaseAdapter-class.html#SUBSTRING
+web2py.gluon.dal.BaseAdapter.expand	web2py.gluon.dal.BaseAdapter-class.html#expand
+web2py.gluon.dal.BaseAdapter.EXTRACT	web2py.gluon.dal.BaseAdapter-class.html#EXTRACT
+web2py.gluon.dal.BaseAdapter.commit_on_alter_table	web2py.gluon.dal.BaseAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.BaseAdapter.represent_exceptions	web2py.gluon.dal.BaseAdapter-class.html#represent_exceptions
+web2py.gluon.dal.BaseAdapter.sequence_name	web2py.gluon.dal.BaseAdapter-class.html#sequence_name
+web2py.gluon.dal.BaseAdapter.ADD	web2py.gluon.dal.BaseAdapter-class.html#ADD
+web2py.gluon.dal.BaseAdapter.count	web2py.gluon.dal.BaseAdapter-class.html#count
+web2py.gluon.dal.BaseAdapter.UPPER	web2py.gluon.dal.BaseAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.BaseAdapter.LIKE	web2py.gluon.dal.BaseAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.BaseAdapter.file_exists	web2py.gluon.dal.BaseAdapter-class.html#file_exists
+web2py.gluon.dal.BaseAdapter.delete	web2py.gluon.dal.BaseAdapter-class.html#delete
+web2py.gluon.dal.BaseAdapter.LOWER	web2py.gluon.dal.BaseAdapter-class.html#LOWER
+web2py.gluon.dal.BaseAdapter._update	web2py.gluon.dal.BaseAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.BaseAdapter.ENDSWITH	web2py.gluon.dal.BaseAdapter-class.html#ENDSWITH
+web2py.gluon.dal.BaseAdapter.constraint_name	web2py.gluon.dal.BaseAdapter-class.html#constraint_name
+web2py.gluon.dal.BaseAdapter.DIV	web2py.gluon.dal.BaseAdapter-class.html#DIV
+web2py.gluon.dal.BaseAdapter.__init__	web2py.gluon.dal.BaseAdapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.BaseAdapter.LE	web2py.gluon.dal.BaseAdapter-class.html#LE
+web2py.gluon.dal.BaseAdapter.file_open	web2py.gluon.dal.BaseAdapter-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.BaseAdapter.LT	web2py.gluon.dal.BaseAdapter-class.html#LT
+web2py.gluon.dal.BaseAdapter.COMMA	web2py.gluon.dal.BaseAdapter-class.html#COMMA
+web2py.gluon.dal.BaseAdapter.create_table	web2py.gluon.dal.BaseAdapter-class.html#create_table
+web2py.gluon.dal.BaseAdapter.bulk_insert	web2py.gluon.dal.BaseAdapter-class.html#bulk_insert
+web2py.gluon.dal.BaseAdapter.AGGREGATE	web2py.gluon.dal.BaseAdapter-class.html#AGGREGATE
+web2py.gluon.dal.BaseAdapter.file_close	web2py.gluon.dal.BaseAdapter-class.html#file_close
+web2py.gluon.dal.BaseAdapter.RANDOM	web2py.gluon.dal.BaseAdapter-class.html#RANDOM
+web2py.gluon.dal.BaseAdapter.truncate	web2py.gluon.dal.BaseAdapter-class.html#truncate
+web2py.gluon.dal.BaseAdapter.driver	web2py.gluon.dal.BaseAdapter-class.html#driver
+web2py.gluon.dal.BaseAdapter.update	web2py.gluon.dal.BaseAdapter-class.html#update
+web2py.gluon.dal.BaseAdapter.AS	web2py.gluon.dal.BaseAdapter-class.html#AS
+web2py.gluon.dal.BaseAdapter.trigger_name	web2py.gluon.dal.BaseAdapter-class.html#trigger_name
+web2py.gluon.dal.BaseAdapter.types	web2py.gluon.dal.BaseAdapter-class.html#types
+web2py.gluon.dal.BaseAdapter._count	web2py.gluon.dal.BaseAdapter-class.html#_count
+web2py.gluon.dal.BaseAdapter.CONTAINS	web2py.gluon.dal.BaseAdapter-class.html#CONTAINS
+web2py.gluon.dal.BaseAdapter.INVERT	web2py.gluon.dal.BaseAdapter-class.html#INVERT
+web2py.gluon.dal.BaseAdapter.alias	web2py.gluon.dal.BaseAdapter-class.html#alias
+web2py.gluon.dal.BaseAdapter.lastrowid	web2py.gluon.dal.BaseAdapter-class.html#lastrowid
+web2py.gluon.dal.ConnectionPool	web2py.gluon.dal.ConnectionPool-class.html
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.CouchDBAdapter	web2py.gluon.dal.CouchDBAdapter-class.html
+web2py.gluon.dal.CouchDBAdapter.represent	web2py.gluon.dal.CouchDBAdapter-class.html#represent
+web2py.gluon.dal.NoSQLAdapter.log_execute	web2py.gluon.dal.NoSQLAdapter-class.html#log_execute
+web2py.gluon.dal.BaseAdapter.select_limitby	web2py.gluon.dal.BaseAdapter-class.html#select_limitby
+web2py.gluon.dal.BaseAdapter._truncate	web2py.gluon.dal.BaseAdapter-class.html#_truncate
+web2py.gluon.dal.NoSQLAdapter.SUB	web2py.gluon.dal.NoSQLAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.NoSQLAdapter.LEFT_JOIN	web2py.gluon.dal.NoSQLAdapter-class.html#LEFT_JOIN
+web2py.gluon.dal.NoSQLAdapter.distributed_transaction_begin	web2py.gluon.dal.NoSQLAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.BaseAdapter.GT	web2py.gluon.dal.BaseAdapter-class.html#GT
+web2py.gluon.dal.NoSQLAdapter.rollback	web2py.gluon.dal.NoSQLAdapter-class.html#rollback
+web2py.gluon.dal.NoSQLAdapter.ON	web2py.gluon.dal.NoSQLAdapter-class.html#ON
+web2py.gluon.dal.BaseAdapter.ALLOW_NULL	web2py.gluon.dal.BaseAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.BaseAdapter.maxcharlength	web2py.gluon.dal.BaseAdapter-class.html#maxcharlength
+web2py.gluon.dal.BaseAdapter.GE	web2py.gluon.dal.BaseAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.BaseAdapter._drop	web2py.gluon.dal.BaseAdapter-class.html#_drop
+web2py.gluon.dal.NoSQLAdapter.integrity_error_class	web2py.gluon.dal.NoSQLAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.CouchDBAdapter._select	web2py.gluon.dal.CouchDBAdapter-class.html#_select
+web2py.gluon.dal.CouchDBAdapter.insert	web2py.gluon.dal.CouchDBAdapter-class.html#insert
+web2py.gluon.dal.NoSQLAdapter.execute	web2py.gluon.dal.NoSQLAdapter-class.html#execute
+web2py.gluon.dal.NoSQLAdapter.drop	web2py.gluon.dal.NoSQLAdapter-class.html#drop
+web2py.gluon.dal.NoSQLAdapter.migrate_table	web2py.gluon.dal.NoSQLAdapter-class.html#migrate_table
+web2py.gluon.dal.NoSQLAdapter.concat_add	web2py.gluon.dal.NoSQLAdapter-class.html#concat_add
+web2py.gluon.dal.NoSQLAdapter._insert	web2py.gluon.dal.NoSQLAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.BaseAdapter.support_distributed_transaction	web2py.gluon.dal.BaseAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.CouchDBAdapter.OR	web2py.gluon.dal.CouchDBAdapter-class.html#OR
+web2py.gluon.dal.BaseAdapter.file_delete	web2py.gluon.dal.BaseAdapter-class.html#file_delete
+web2py.gluon.dal.BaseAdapter.NOT_NULL	web2py.gluon.dal.BaseAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.NoSQLAdapter.close	web2py.gluon.dal.NoSQLAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.NoSQLAdapter.rowslice	web2py.gluon.dal.NoSQLAdapter-class.html#rowslice
+web2py.gluon.dal.NoSQLAdapter.create_sequence_and_triggers	web2py.gluon.dal.NoSQLAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.NoSQLAdapter.rollback_prepared	web2py.gluon.dal.NoSQLAdapter-class.html#rollback_prepared
+web2py.gluon.dal.NoSQLAdapter.commit_prepared	web2py.gluon.dal.NoSQLAdapter-class.html#commit_prepared
+web2py.gluon.dal.CouchDBAdapter.EQ	web2py.gluon.dal.CouchDBAdapter-class.html#EQ
+web2py.gluon.dal.CouchDBAdapter.AND	web2py.gluon.dal.CouchDBAdapter-class.html#AND
+web2py.gluon.dal.CouchDBAdapter.uploads_in_blob	web2py.gluon.dal.CouchDBAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.BaseAdapter.NOT	web2py.gluon.dal.BaseAdapter-class.html#NOT
+web2py.gluon.dal.NoSQLAdapter.commit	web2py.gluon.dal.NoSQLAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.NoSQLAdapter.STARTSWITH	web2py.gluon.dal.NoSQLAdapter-class.html#STARTSWITH
+web2py.gluon.dal.NoSQLAdapter.to_unicode	web2py.gluon.dal.NoSQLAdapter-class.html#to_unicode
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.NoSQLAdapter._delete	web2py.gluon.dal.NoSQLAdapter-class.html#_delete
+web2py.gluon.dal.BaseAdapter.BELONGS	web2py.gluon.dal.BaseAdapter-class.html#BELONGS
+web2py.gluon.dal.NoSQLAdapter.MUL	web2py.gluon.dal.NoSQLAdapter-class.html#MUL
+web2py.gluon.dal.CouchDBAdapter.select	web2py.gluon.dal.CouchDBAdapter-class.html#select
+web2py.gluon.dal.NoSQLAdapter.PRIMARY_KEY	web2py.gluon.dal.NoSQLAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.NoSQLAdapter.prepare	web2py.gluon.dal.NoSQLAdapter-class.html#prepare
+web2py.gluon.dal.CouchDBAdapter.NE	web2py.gluon.dal.CouchDBAdapter-class.html#NE
+web2py.gluon.dal.NoSQLAdapter.SUBSTRING	web2py.gluon.dal.NoSQLAdapter-class.html#SUBSTRING
+web2py.gluon.dal.CouchDBAdapter.expand	web2py.gluon.dal.CouchDBAdapter-class.html#expand
+web2py.gluon.dal.NoSQLAdapter.EXTRACT	web2py.gluon.dal.NoSQLAdapter-class.html#EXTRACT
+web2py.gluon.dal.BaseAdapter.commit_on_alter_table	web2py.gluon.dal.BaseAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.NoSQLAdapter.represent_exceptions	web2py.gluon.dal.NoSQLAdapter-class.html#represent_exceptions
+web2py.gluon.dal.BaseAdapter.sequence_name	web2py.gluon.dal.BaseAdapter-class.html#sequence_name
+web2py.gluon.dal.NoSQLAdapter.ADD	web2py.gluon.dal.NoSQLAdapter-class.html#ADD
+web2py.gluon.dal.CouchDBAdapter.count	web2py.gluon.dal.CouchDBAdapter-class.html#count
+web2py.gluon.dal.NoSQLAdapter.UPPER	web2py.gluon.dal.NoSQLAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.NoSQLAdapter.LIKE	web2py.gluon.dal.NoSQLAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.CouchDBAdapter.file_exists	web2py.gluon.dal.CouchDBAdapter-class.html#file_exists
+web2py.gluon.dal.CouchDBAdapter.delete	web2py.gluon.dal.CouchDBAdapter-class.html#delete
+web2py.gluon.dal.NoSQLAdapter.LOWER	web2py.gluon.dal.NoSQLAdapter-class.html#LOWER
+web2py.gluon.dal.NoSQLAdapter._update	web2py.gluon.dal.NoSQLAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.NoSQLAdapter.ENDSWITH	web2py.gluon.dal.NoSQLAdapter-class.html#ENDSWITH
+web2py.gluon.dal.NoSQLAdapter.constraint_name	web2py.gluon.dal.NoSQLAdapter-class.html#constraint_name
+web2py.gluon.dal.NoSQLAdapter.DIV	web2py.gluon.dal.NoSQLAdapter-class.html#DIV
+web2py.gluon.dal.CouchDBAdapter.__init__	web2py.gluon.dal.CouchDBAdapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.BaseAdapter.LE	web2py.gluon.dal.BaseAdapter-class.html#LE
+web2py.gluon.dal.CouchDBAdapter.file_open	web2py.gluon.dal.CouchDBAdapter-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.BaseAdapter.LT	web2py.gluon.dal.BaseAdapter-class.html#LT
+web2py.gluon.dal.CouchDBAdapter.COMMA	web2py.gluon.dal.CouchDBAdapter-class.html#COMMA
+web2py.gluon.dal.CouchDBAdapter.create_table	web2py.gluon.dal.CouchDBAdapter-class.html#create_table
+web2py.gluon.dal.BaseAdapter.bulk_insert	web2py.gluon.dal.BaseAdapter-class.html#bulk_insert
+web2py.gluon.dal.NoSQLAdapter.AGGREGATE	web2py.gluon.dal.NoSQLAdapter-class.html#AGGREGATE
+web2py.gluon.dal.CouchDBAdapter.file_close	web2py.gluon.dal.CouchDBAdapter-class.html#file_close
+web2py.gluon.dal.NoSQLAdapter.RANDOM	web2py.gluon.dal.NoSQLAdapter-class.html#RANDOM
+web2py.gluon.dal.BaseAdapter.truncate	web2py.gluon.dal.BaseAdapter-class.html#truncate
+web2py.gluon.dal.BaseAdapter.driver	web2py.gluon.dal.BaseAdapter-class.html#driver
+web2py.gluon.dal.CouchDBAdapter.update	web2py.gluon.dal.CouchDBAdapter-class.html#update
+web2py.gluon.dal.NoSQLAdapter.AS	web2py.gluon.dal.NoSQLAdapter-class.html#AS
+web2py.gluon.dal.BaseAdapter.trigger_name	web2py.gluon.dal.BaseAdapter-class.html#trigger_name
+web2py.gluon.dal.CouchDBAdapter.types	web2py.gluon.dal.CouchDBAdapter-class.html#types
+web2py.gluon.dal.NoSQLAdapter._count	web2py.gluon.dal.NoSQLAdapter-class.html#_count
+web2py.gluon.dal.BaseAdapter.CONTAINS	web2py.gluon.dal.BaseAdapter-class.html#CONTAINS
+web2py.gluon.dal.BaseAdapter.INVERT	web2py.gluon.dal.BaseAdapter-class.html#INVERT
+web2py.gluon.dal.NoSQLAdapter.alias	web2py.gluon.dal.NoSQLAdapter-class.html#alias
+web2py.gluon.dal.NoSQLAdapter.lastrowid	web2py.gluon.dal.NoSQLAdapter-class.html#lastrowid
+web2py.gluon.dal.CubridAdapter	web2py.gluon.dal.CubridAdapter-class.html
+web2py.gluon.dal.BaseAdapter.represent	web2py.gluon.dal.BaseAdapter-class.html#represent
+web2py.gluon.dal.BaseAdapter.log_execute	web2py.gluon.dal.BaseAdapter-class.html#log_execute
+web2py.gluon.dal.BaseAdapter.select_limitby	web2py.gluon.dal.BaseAdapter-class.html#select_limitby
+web2py.gluon.dal.BaseAdapter._truncate	web2py.gluon.dal.BaseAdapter-class.html#_truncate
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.BaseAdapter.LEFT_JOIN	web2py.gluon.dal.BaseAdapter-class.html#LEFT_JOIN
+web2py.gluon.dal.MySQLAdapter.distributed_transaction_begin	web2py.gluon.dal.MySQLAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.BaseAdapter.GT	web2py.gluon.dal.BaseAdapter-class.html#GT
+web2py.gluon.dal.BaseAdapter.rollback	web2py.gluon.dal.BaseAdapter-class.html#rollback
+web2py.gluon.dal.BaseAdapter.ON	web2py.gluon.dal.BaseAdapter-class.html#ON
+web2py.gluon.dal.BaseAdapter.ALLOW_NULL	web2py.gluon.dal.BaseAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.MySQLAdapter.maxcharlength	web2py.gluon.dal.MySQLAdapter-class.html#maxcharlength
+web2py.gluon.dal.BaseAdapter.GE	web2py.gluon.dal.BaseAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.MySQLAdapter._drop	web2py.gluon.dal.MySQLAdapter-class.html#_drop
+web2py.gluon.dal.BaseAdapter.integrity_error_class	web2py.gluon.dal.BaseAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.BaseAdapter._select	web2py.gluon.dal.BaseAdapter-class.html#_select
+web2py.gluon.dal.BaseAdapter.insert	web2py.gluon.dal.BaseAdapter-class.html#insert
+web2py.gluon.dal.BaseAdapter.execute	web2py.gluon.dal.BaseAdapter-class.html#execute
+web2py.gluon.dal.BaseAdapter.drop	web2py.gluon.dal.BaseAdapter-class.html#drop
+web2py.gluon.dal.BaseAdapter.migrate_table	web2py.gluon.dal.BaseAdapter-class.html#migrate_table
+web2py.gluon.dal.MySQLAdapter.concat_add	web2py.gluon.dal.MySQLAdapter-class.html#concat_add
+web2py.gluon.dal.BaseAdapter._insert	web2py.gluon.dal.BaseAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.MySQLAdapter.support_distributed_transaction	web2py.gluon.dal.MySQLAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.BaseAdapter.OR	web2py.gluon.dal.BaseAdapter-class.html#OR
+web2py.gluon.dal.BaseAdapter.file_delete	web2py.gluon.dal.BaseAdapter-class.html#file_delete
+web2py.gluon.dal.BaseAdapter.NOT_NULL	web2py.gluon.dal.BaseAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.BaseAdapter.close	web2py.gluon.dal.BaseAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.BaseAdapter.rowslice	web2py.gluon.dal.BaseAdapter-class.html#rowslice
+web2py.gluon.dal.BaseAdapter.create_sequence_and_triggers	web2py.gluon.dal.BaseAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.MySQLAdapter.rollback_prepared	web2py.gluon.dal.MySQLAdapter-class.html#rollback_prepared
+web2py.gluon.dal.MySQLAdapter.commit_prepared	web2py.gluon.dal.MySQLAdapter-class.html#commit_prepared
+web2py.gluon.dal.BaseAdapter.EQ	web2py.gluon.dal.BaseAdapter-class.html#EQ
+web2py.gluon.dal.BaseAdapter.AND	web2py.gluon.dal.BaseAdapter-class.html#AND
+web2py.gluon.dal.BaseAdapter.uploads_in_blob	web2py.gluon.dal.BaseAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.BaseAdapter.NOT	web2py.gluon.dal.BaseAdapter-class.html#NOT
+web2py.gluon.dal.BaseAdapter.commit	web2py.gluon.dal.BaseAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.BaseAdapter.STARTSWITH	web2py.gluon.dal.BaseAdapter-class.html#STARTSWITH
+web2py.gluon.dal.BaseAdapter.SUB	web2py.gluon.dal.BaseAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.BaseAdapter._delete	web2py.gluon.dal.BaseAdapter-class.html#_delete
+web2py.gluon.dal.BaseAdapter.BELONGS	web2py.gluon.dal.BaseAdapter-class.html#BELONGS
+web2py.gluon.dal.BaseAdapter.MUL	web2py.gluon.dal.BaseAdapter-class.html#MUL
+web2py.gluon.dal.BaseAdapter.select	web2py.gluon.dal.BaseAdapter-class.html#select
+web2py.gluon.dal.BaseAdapter.PRIMARY_KEY	web2py.gluon.dal.BaseAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.MySQLAdapter.prepare	web2py.gluon.dal.MySQLAdapter-class.html#prepare
+web2py.gluon.dal.BaseAdapter.NE	web2py.gluon.dal.BaseAdapter-class.html#NE
+web2py.gluon.dal.MySQLAdapter.SUBSTRING	web2py.gluon.dal.MySQLAdapter-class.html#SUBSTRING
+web2py.gluon.dal.BaseAdapter.expand	web2py.gluon.dal.BaseAdapter-class.html#expand
+web2py.gluon.dal.BaseAdapter.EXTRACT	web2py.gluon.dal.BaseAdapter-class.html#EXTRACT
+web2py.gluon.dal.MySQLAdapter.commit_on_alter_table	web2py.gluon.dal.MySQLAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.BaseAdapter.represent_exceptions	web2py.gluon.dal.BaseAdapter-class.html#represent_exceptions
+web2py.gluon.dal.BaseAdapter.sequence_name	web2py.gluon.dal.BaseAdapter-class.html#sequence_name
+web2py.gluon.dal.BaseAdapter.ADD	web2py.gluon.dal.BaseAdapter-class.html#ADD
+web2py.gluon.dal.BaseAdapter.count	web2py.gluon.dal.BaseAdapter-class.html#count
+web2py.gluon.dal.BaseAdapter.UPPER	web2py.gluon.dal.BaseAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.BaseAdapter.LIKE	web2py.gluon.dal.BaseAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.BaseAdapter.file_exists	web2py.gluon.dal.BaseAdapter-class.html#file_exists
+web2py.gluon.dal.BaseAdapter.delete	web2py.gluon.dal.BaseAdapter-class.html#delete
+web2py.gluon.dal.BaseAdapter.LOWER	web2py.gluon.dal.BaseAdapter-class.html#LOWER
+web2py.gluon.dal.BaseAdapter._update	web2py.gluon.dal.BaseAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.BaseAdapter.ENDSWITH	web2py.gluon.dal.BaseAdapter-class.html#ENDSWITH
+web2py.gluon.dal.BaseAdapter.constraint_name	web2py.gluon.dal.BaseAdapter-class.html#constraint_name
+web2py.gluon.dal.BaseAdapter.DIV	web2py.gluon.dal.BaseAdapter-class.html#DIV
+web2py.gluon.dal.CubridAdapter.__init__	web2py.gluon.dal.CubridAdapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.BaseAdapter.LE	web2py.gluon.dal.BaseAdapter-class.html#LE
+web2py.gluon.dal.BaseAdapter.file_open	web2py.gluon.dal.BaseAdapter-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.BaseAdapter.LT	web2py.gluon.dal.BaseAdapter-class.html#LT
+web2py.gluon.dal.BaseAdapter.COMMA	web2py.gluon.dal.BaseAdapter-class.html#COMMA
+web2py.gluon.dal.BaseAdapter.create_table	web2py.gluon.dal.BaseAdapter-class.html#create_table
+web2py.gluon.dal.BaseAdapter.bulk_insert	web2py.gluon.dal.BaseAdapter-class.html#bulk_insert
+web2py.gluon.dal.BaseAdapter.AGGREGATE	web2py.gluon.dal.BaseAdapter-class.html#AGGREGATE
+web2py.gluon.dal.BaseAdapter.file_close	web2py.gluon.dal.BaseAdapter-class.html#file_close
+web2py.gluon.dal.MySQLAdapter.RANDOM	web2py.gluon.dal.MySQLAdapter-class.html#RANDOM
+web2py.gluon.dal.BaseAdapter.truncate	web2py.gluon.dal.BaseAdapter-class.html#truncate
+web2py.gluon.dal.CubridAdapter.driver	web2py.gluon.dal.CubridAdapter-class.html#driver
+web2py.gluon.dal.BaseAdapter.update	web2py.gluon.dal.BaseAdapter-class.html#update
+web2py.gluon.dal.BaseAdapter.AS	web2py.gluon.dal.BaseAdapter-class.html#AS
+web2py.gluon.dal.BaseAdapter.trigger_name	web2py.gluon.dal.BaseAdapter-class.html#trigger_name
+web2py.gluon.dal.MySQLAdapter.types	web2py.gluon.dal.MySQLAdapter-class.html#types
+web2py.gluon.dal.BaseAdapter._count	web2py.gluon.dal.BaseAdapter-class.html#_count
+web2py.gluon.dal.BaseAdapter.CONTAINS	web2py.gluon.dal.BaseAdapter-class.html#CONTAINS
+web2py.gluon.dal.BaseAdapter.INVERT	web2py.gluon.dal.BaseAdapter-class.html#INVERT
+web2py.gluon.dal.BaseAdapter.alias	web2py.gluon.dal.BaseAdapter-class.html#alias
+web2py.gluon.dal.MySQLAdapter.lastrowid	web2py.gluon.dal.MySQLAdapter-class.html#lastrowid
+web2py.gluon.dal.DAL	web2py.gluon.dal.DAL-class.html
+web2py.gluon.dal.DAL.Field	web2py.gluon.dal.Field-class.html
+web2py.gluon.dal.DAL.set_folder	web2py.gluon.dal.DAL-class.html#set_folder
+web2py.gluon.dal.DAL.__init__	web2py.gluon.dal.DAL-class.html#__init__
+web2py.gluon.dal.DAL.import_from_csv_file	web2py.gluon.dal.DAL-class.html#import_from_csv_file
+web2py.gluon.dal.DAL.__setattr__	web2py.gluon.dal.DAL-class.html#__setattr__
+web2py.gluon.dal.DAL._update_referenced_by	web2py.gluon.dal.DAL-class.html#_update_referenced_by
+web2py.gluon.dal.DAL.parse_as_rest	web2py.gluon.dal.DAL-class.html#parse_as_rest
+web2py.gluon.dal.DAL.export_to_csv_file	web2py.gluon.dal.DAL-class.html#export_to_csv_file
+web2py.gluon.dal.DAL.define_table	web2py.gluon.dal.DAL-class.html#define_table
+web2py.gluon.dal.DAL.__getattr__	web2py.gluon.dal.DAL-class.html#__getattr__
+web2py.gluon.dal.DAL.__call__	web2py.gluon.dal.DAL-class.html#__call__
+web2py.gluon.dal.DAL.import_table_definitions	web2py.gluon.dal.DAL-class.html#import_table_definitions
+web2py.gluon.dal.DAL.distributed_transaction_begin	web2py.gluon.dal.DAL-class.html#distributed_transaction_begin
+web2py.gluon.dal.DAL.rollback	web2py.gluon.dal.DAL-class.html#rollback
+web2py.gluon.dal.DAL.__getitem__	web2py.gluon.dal.DAL-class.html#__getitem__
+web2py.gluon.dal.DAL.executesql	web2py.gluon.dal.DAL-class.html#executesql
+web2py.gluon.dal.DAL.distributed_transaction_commit	web2py.gluon.dal.DAL-class.html#distributed_transaction_commit
+web2py.gluon.dal.DAL.check_reserved_keyword	web2py.gluon.dal.DAL-class.html#check_reserved_keyword
+web2py.gluon.dal.DAL.__setitem__	web2py.gluon.dal.DAL-class.html#__setitem__
+web2py.gluon.dal.DAL.commit	web2py.gluon.dal.DAL-class.html#commit
+web2py.gluon.dal.DAL.__contains__	web2py.gluon.dal.DAL-class.html#__contains__
+web2py.gluon.dal.DAL.__iter__	web2py.gluon.dal.DAL-class.html#__iter__
+web2py.gluon.dal.DAL.__repr__	web2py.gluon.dal.DAL-class.html#__repr__
+web2py.gluon.dal.DAL.Table	web2py.gluon.dal.Table-class.html
+web2py.gluon.dal.DB2Adapter	web2py.gluon.dal.DB2Adapter-class.html
+web2py.gluon.dal.BaseAdapter.represent	web2py.gluon.dal.BaseAdapter-class.html#represent
+web2py.gluon.dal.BaseAdapter.log_execute	web2py.gluon.dal.BaseAdapter-class.html#log_execute
+web2py.gluon.dal.DB2Adapter.select_limitby	web2py.gluon.dal.DB2Adapter-class.html#select_limitby
+web2py.gluon.dal.BaseAdapter._truncate	web2py.gluon.dal.BaseAdapter-class.html#_truncate
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.DB2Adapter.LEFT_JOIN	web2py.gluon.dal.DB2Adapter-class.html#LEFT_JOIN
+web2py.gluon.dal.BaseAdapter.distributed_transaction_begin	web2py.gluon.dal.BaseAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.BaseAdapter.GT	web2py.gluon.dal.BaseAdapter-class.html#GT
+web2py.gluon.dal.BaseAdapter.rollback	web2py.gluon.dal.BaseAdapter-class.html#rollback
+web2py.gluon.dal.BaseAdapter.ON	web2py.gluon.dal.BaseAdapter-class.html#ON
+web2py.gluon.dal.BaseAdapter.ALLOW_NULL	web2py.gluon.dal.BaseAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.BaseAdapter.maxcharlength	web2py.gluon.dal.BaseAdapter-class.html#maxcharlength
+web2py.gluon.dal.BaseAdapter.GE	web2py.gluon.dal.BaseAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.BaseAdapter._drop	web2py.gluon.dal.BaseAdapter-class.html#_drop
+web2py.gluon.dal.BaseAdapter.integrity_error_class	web2py.gluon.dal.BaseAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.BaseAdapter._select	web2py.gluon.dal.BaseAdapter-class.html#_select
+web2py.gluon.dal.BaseAdapter.insert	web2py.gluon.dal.BaseAdapter-class.html#insert
+web2py.gluon.dal.DB2Adapter.execute	web2py.gluon.dal.DB2Adapter-class.html#execute
+web2py.gluon.dal.BaseAdapter.drop	web2py.gluon.dal.BaseAdapter-class.html#drop
+web2py.gluon.dal.BaseAdapter.migrate_table	web2py.gluon.dal.BaseAdapter-class.html#migrate_table
+web2py.gluon.dal.BaseAdapter.concat_add	web2py.gluon.dal.BaseAdapter-class.html#concat_add
+web2py.gluon.dal.BaseAdapter._insert	web2py.gluon.dal.BaseAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.BaseAdapter.support_distributed_transaction	web2py.gluon.dal.BaseAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.BaseAdapter.OR	web2py.gluon.dal.BaseAdapter-class.html#OR
+web2py.gluon.dal.BaseAdapter.file_delete	web2py.gluon.dal.BaseAdapter-class.html#file_delete
+web2py.gluon.dal.BaseAdapter.NOT_NULL	web2py.gluon.dal.BaseAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.BaseAdapter.close	web2py.gluon.dal.BaseAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.DB2Adapter.rowslice	web2py.gluon.dal.DB2Adapter-class.html#rowslice
+web2py.gluon.dal.BaseAdapter.create_sequence_and_triggers	web2py.gluon.dal.BaseAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.BaseAdapter.rollback_prepared	web2py.gluon.dal.BaseAdapter-class.html#rollback_prepared
+web2py.gluon.dal.BaseAdapter.commit_prepared	web2py.gluon.dal.BaseAdapter-class.html#commit_prepared
+web2py.gluon.dal.BaseAdapter.EQ	web2py.gluon.dal.BaseAdapter-class.html#EQ
+web2py.gluon.dal.BaseAdapter.AND	web2py.gluon.dal.BaseAdapter-class.html#AND
+web2py.gluon.dal.BaseAdapter.uploads_in_blob	web2py.gluon.dal.BaseAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.BaseAdapter.NOT	web2py.gluon.dal.BaseAdapter-class.html#NOT
+web2py.gluon.dal.BaseAdapter.commit	web2py.gluon.dal.BaseAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.BaseAdapter.STARTSWITH	web2py.gluon.dal.BaseAdapter-class.html#STARTSWITH
+web2py.gluon.dal.BaseAdapter.SUB	web2py.gluon.dal.BaseAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.BaseAdapter._delete	web2py.gluon.dal.BaseAdapter-class.html#_delete
+web2py.gluon.dal.BaseAdapter.BELONGS	web2py.gluon.dal.BaseAdapter-class.html#BELONGS
+web2py.gluon.dal.BaseAdapter.MUL	web2py.gluon.dal.BaseAdapter-class.html#MUL
+web2py.gluon.dal.BaseAdapter.select	web2py.gluon.dal.BaseAdapter-class.html#select
+web2py.gluon.dal.BaseAdapter.PRIMARY_KEY	web2py.gluon.dal.BaseAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.BaseAdapter.prepare	web2py.gluon.dal.BaseAdapter-class.html#prepare
+web2py.gluon.dal.BaseAdapter.NE	web2py.gluon.dal.BaseAdapter-class.html#NE
+web2py.gluon.dal.BaseAdapter.SUBSTRING	web2py.gluon.dal.BaseAdapter-class.html#SUBSTRING
+web2py.gluon.dal.DB2Adapter.types	web2py.gluon.dal.DB2Adapter-class.html#types
+web2py.gluon.dal.BaseAdapter.EXTRACT	web2py.gluon.dal.BaseAdapter-class.html#EXTRACT
+web2py.gluon.dal.BaseAdapter.commit_on_alter_table	web2py.gluon.dal.BaseAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.DB2Adapter.represent_exceptions	web2py.gluon.dal.DB2Adapter-class.html#represent_exceptions
+web2py.gluon.dal.BaseAdapter.sequence_name	web2py.gluon.dal.BaseAdapter-class.html#sequence_name
+web2py.gluon.dal.BaseAdapter.ADD	web2py.gluon.dal.BaseAdapter-class.html#ADD
+web2py.gluon.dal.BaseAdapter.count	web2py.gluon.dal.BaseAdapter-class.html#count
+web2py.gluon.dal.BaseAdapter.UPPER	web2py.gluon.dal.BaseAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.BaseAdapter.LIKE	web2py.gluon.dal.BaseAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.BaseAdapter.file_exists	web2py.gluon.dal.BaseAdapter-class.html#file_exists
+web2py.gluon.dal.BaseAdapter.delete	web2py.gluon.dal.BaseAdapter-class.html#delete
+web2py.gluon.dal.BaseAdapter.LOWER	web2py.gluon.dal.BaseAdapter-class.html#LOWER
+web2py.gluon.dal.BaseAdapter._update	web2py.gluon.dal.BaseAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.BaseAdapter.ENDSWITH	web2py.gluon.dal.BaseAdapter-class.html#ENDSWITH
+web2py.gluon.dal.BaseAdapter.constraint_name	web2py.gluon.dal.BaseAdapter-class.html#constraint_name
+web2py.gluon.dal.BaseAdapter.DIV	web2py.gluon.dal.BaseAdapter-class.html#DIV
+web2py.gluon.dal.DB2Adapter.__init__	web2py.gluon.dal.DB2Adapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.BaseAdapter.LE	web2py.gluon.dal.BaseAdapter-class.html#LE
+web2py.gluon.dal.BaseAdapter.file_open	web2py.gluon.dal.BaseAdapter-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.BaseAdapter.LT	web2py.gluon.dal.BaseAdapter-class.html#LT
+web2py.gluon.dal.BaseAdapter.COMMA	web2py.gluon.dal.BaseAdapter-class.html#COMMA
+web2py.gluon.dal.BaseAdapter.create_table	web2py.gluon.dal.BaseAdapter-class.html#create_table
+web2py.gluon.dal.BaseAdapter.bulk_insert	web2py.gluon.dal.BaseAdapter-class.html#bulk_insert
+web2py.gluon.dal.BaseAdapter.AGGREGATE	web2py.gluon.dal.BaseAdapter-class.html#AGGREGATE
+web2py.gluon.dal.BaseAdapter.file_close	web2py.gluon.dal.BaseAdapter-class.html#file_close
+web2py.gluon.dal.DB2Adapter.RANDOM	web2py.gluon.dal.DB2Adapter-class.html#RANDOM
+web2py.gluon.dal.BaseAdapter.truncate	web2py.gluon.dal.BaseAdapter-class.html#truncate
+web2py.gluon.dal.DB2Adapter.driver	web2py.gluon.dal.DB2Adapter-class.html#driver
+web2py.gluon.dal.BaseAdapter.update	web2py.gluon.dal.BaseAdapter-class.html#update
+web2py.gluon.dal.BaseAdapter.AS	web2py.gluon.dal.BaseAdapter-class.html#AS
+web2py.gluon.dal.BaseAdapter.trigger_name	web2py.gluon.dal.BaseAdapter-class.html#trigger_name
+web2py.gluon.dal.BaseAdapter.expand	web2py.gluon.dal.BaseAdapter-class.html#expand
+web2py.gluon.dal.BaseAdapter._count	web2py.gluon.dal.BaseAdapter-class.html#_count
+web2py.gluon.dal.BaseAdapter.CONTAINS	web2py.gluon.dal.BaseAdapter-class.html#CONTAINS
+web2py.gluon.dal.BaseAdapter.INVERT	web2py.gluon.dal.BaseAdapter-class.html#INVERT
+web2py.gluon.dal.BaseAdapter.alias	web2py.gluon.dal.BaseAdapter-class.html#alias
+web2py.gluon.dal.DB2Adapter.lastrowid	web2py.gluon.dal.DB2Adapter-class.html#lastrowid
+web2py.gluon.dal.DatabaseStoredFile	web2py.gluon.dal.DatabaseStoredFile-class.html
+web2py.gluon.dal.DatabaseStoredFile.exists	web2py.gluon.dal.DatabaseStoredFile-class.html#exists
+web2py.gluon.dal.DatabaseStoredFile.read	web2py.gluon.dal.DatabaseStoredFile-class.html#read
+web2py.gluon.dal.DatabaseStoredFile.write	web2py.gluon.dal.DatabaseStoredFile-class.html#write
+web2py.gluon.dal.DatabaseStoredFile.web2py_filesystem	web2py.gluon.dal.DatabaseStoredFile-class.html#web2py_filesystem
+web2py.gluon.dal.DatabaseStoredFile.close	web2py.gluon.dal.DatabaseStoredFile-class.html#close
+web2py.gluon.dal.DatabaseStoredFile.readline	web2py.gluon.dal.DatabaseStoredFile-class.html#readline
+web2py.gluon.dal.DatabaseStoredFile.__init__	web2py.gluon.dal.DatabaseStoredFile-class.html#__init__
+web2py.gluon.dal.Expression	web2py.gluon.dal.Expression-class.html
+web2py.gluon.dal.Expression.upper	web2py.gluon.dal.Expression-class.html#upper
+web2py.gluon.dal.Expression.__getslice__	web2py.gluon.dal.Expression-class.html#__getslice__
+web2py.gluon.dal.Expression.coalesce_zero	web2py.gluon.dal.Expression-class.html#coalesce_zero
+web2py.gluon.dal.Expression.__str__	web2py.gluon.dal.Expression-class.html#__str__
+web2py.gluon.dal.Expression.month	web2py.gluon.dal.Expression-class.html#month
+web2py.gluon.dal.Expression.endswith	web2py.gluon.dal.Expression-class.html#endswith
+web2py.gluon.dal.Expression.year	web2py.gluon.dal.Expression-class.html#year
+web2py.gluon.dal.Expression.__lt__	web2py.gluon.dal.Expression-class.html#__lt__
+web2py.gluon.dal.Expression.__init__	web2py.gluon.dal.Expression-class.html#__init__
+web2py.gluon.dal.Expression.__invert__	web2py.gluon.dal.Expression-class.html#__invert__
+web2py.gluon.dal.Expression.min	web2py.gluon.dal.Expression-class.html#min
+web2py.gluon.dal.Expression.sum	web2py.gluon.dal.Expression-class.html#sum
+web2py.gluon.dal.Expression.contains	web2py.gluon.dal.Expression-class.html#contains
+web2py.gluon.dal.Expression.belongs	web2py.gluon.dal.Expression-class.html#belongs
+web2py.gluon.dal.Expression.with_alias	web2py.gluon.dal.Expression-class.html#with_alias
+web2py.gluon.dal.Expression.startswith	web2py.gluon.dal.Expression-class.html#startswith
+web2py.gluon.dal.Expression.__getitem__	web2py.gluon.dal.Expression-class.html#__getitem__
+web2py.gluon.dal.Expression.seconds	web2py.gluon.dal.Expression-class.html#seconds
+web2py.gluon.dal.Expression.max	web2py.gluon.dal.Expression-class.html#max
+web2py.gluon.dal.Expression.len	web2py.gluon.dal.Expression-class.html#len
+web2py.gluon.dal.Expression.__or__	web2py.gluon.dal.Expression-class.html#__or__
+web2py.gluon.dal.Expression.__add__	web2py.gluon.dal.Expression-class.html#__add__
+web2py.gluon.dal.Expression.__gt__	web2py.gluon.dal.Expression-class.html#__gt__
+web2py.gluon.dal.Expression.__ne__	web2py.gluon.dal.Expression-class.html#__ne__
+web2py.gluon.dal.Expression.__eq__	web2py.gluon.dal.Expression-class.html#__eq__
+web2py.gluon.dal.Expression.day	web2py.gluon.dal.Expression-class.html#day
+web2py.gluon.dal.Expression.lower	web2py.gluon.dal.Expression-class.html#lower
+web2py.gluon.dal.Expression.like	web2py.gluon.dal.Expression-class.html#like
+web2py.gluon.dal.Expression.hour	web2py.gluon.dal.Expression-class.html#hour
+web2py.gluon.dal.Expression.__mod__	web2py.gluon.dal.Expression-class.html#__mod__
+web2py.gluon.dal.Expression.__div__	web2py.gluon.dal.Expression-class.html#__div__
+web2py.gluon.dal.Expression.__le__	web2py.gluon.dal.Expression-class.html#__le__
+web2py.gluon.dal.Expression.__mul__	web2py.gluon.dal.Expression-class.html#__mul__
+web2py.gluon.dal.Expression.__sub__	web2py.gluon.dal.Expression-class.html#__sub__
+web2py.gluon.dal.Expression.minutes	web2py.gluon.dal.Expression-class.html#minutes
+web2py.gluon.dal.Expression.__ge__	web2py.gluon.dal.Expression-class.html#__ge__
+web2py.gluon.dal.Field	web2py.gluon.dal.Field-class.html
+web2py.gluon.dal.Expression.upper	web2py.gluon.dal.Expression-class.html#upper
+web2py.gluon.dal.Field.retrieve	web2py.gluon.dal.Field-class.html#retrieve
+web2py.gluon.dal.Expression.__getslice__	web2py.gluon.dal.Expression-class.html#__getslice__
+web2py.gluon.dal.Expression.coalesce_zero	web2py.gluon.dal.Expression-class.html#coalesce_zero
+web2py.gluon.dal.Field.__str__	web2py.gluon.dal.Field-class.html#__str__
+web2py.gluon.dal.Expression.month	web2py.gluon.dal.Expression-class.html#month
+web2py.gluon.dal.Expression.endswith	web2py.gluon.dal.Expression-class.html#endswith
+web2py.gluon.dal.Expression.year	web2py.gluon.dal.Expression-class.html#year
+web2py.gluon.dal.Expression.__lt__	web2py.gluon.dal.Expression-class.html#__lt__
+web2py.gluon.dal.Field.__init__	web2py.gluon.dal.Field-class.html#__init__
+web2py.gluon.dal.Expression.__getitem__	web2py.gluon.dal.Expression-class.html#__getitem__
+web2py.gluon.dal.Expression.min	web2py.gluon.dal.Expression-class.html#min
+web2py.gluon.dal.Expression.sum	web2py.gluon.dal.Expression-class.html#sum
+web2py.gluon.dal.Expression.contains	web2py.gluon.dal.Expression-class.html#contains
+web2py.gluon.dal.Expression.belongs	web2py.gluon.dal.Expression-class.html#belongs
+web2py.gluon.dal.Expression.with_alias	web2py.gluon.dal.Expression-class.html#with_alias
+web2py.gluon.dal.Field.formatter	web2py.gluon.dal.Field-class.html#formatter
+web2py.gluon.dal.Field.store	web2py.gluon.dal.Field-class.html#store
+web2py.gluon.dal.Expression.startswith	web2py.gluon.dal.Expression-class.html#startswith
+web2py.gluon.dal.Expression.__invert__	web2py.gluon.dal.Expression-class.html#__invert__
+web2py.gluon.dal.Expression.seconds	web2py.gluon.dal.Expression-class.html#seconds
+web2py.gluon.dal.Expression.max	web2py.gluon.dal.Expression-class.html#max
+web2py.gluon.dal.Expression.len	web2py.gluon.dal.Expression-class.html#len
+web2py.gluon.dal.Expression.__or__	web2py.gluon.dal.Expression-class.html#__or__
+web2py.gluon.dal.Expression.__add__	web2py.gluon.dal.Expression-class.html#__add__
+web2py.gluon.dal.Expression.__gt__	web2py.gluon.dal.Expression-class.html#__gt__
+web2py.gluon.dal.Field.validate	web2py.gluon.dal.Field-class.html#validate
+web2py.gluon.dal.Expression.__eq__	web2py.gluon.dal.Expression-class.html#__eq__
+web2py.gluon.dal.Expression.day	web2py.gluon.dal.Expression-class.html#day
+web2py.gluon.dal.Field.count	web2py.gluon.dal.Field-class.html#count
+web2py.gluon.dal.Expression.lower	web2py.gluon.dal.Expression-class.html#lower
+web2py.gluon.dal.Expression.__ne__	web2py.gluon.dal.Expression-class.html#__ne__
+web2py.gluon.dal.Field.__nonzero__	web2py.gluon.dal.Field-class.html#__nonzero__
+web2py.gluon.dal.Expression.like	web2py.gluon.dal.Expression-class.html#like
+web2py.gluon.dal.Expression.hour	web2py.gluon.dal.Expression-class.html#hour
+web2py.gluon.dal.Expression.__mod__	web2py.gluon.dal.Expression-class.html#__mod__
+web2py.gluon.dal.Expression.__div__	web2py.gluon.dal.Expression-class.html#__div__
+web2py.gluon.dal.Expression.__le__	web2py.gluon.dal.Expression-class.html#__le__
+web2py.gluon.dal.Expression.__mul__	web2py.gluon.dal.Expression-class.html#__mul__
+web2py.gluon.dal.Expression.__sub__	web2py.gluon.dal.Expression-class.html#__sub__
+web2py.gluon.dal.Expression.minutes	web2py.gluon.dal.Expression-class.html#minutes
+web2py.gluon.dal.Expression.__ge__	web2py.gluon.dal.Expression-class.html#__ge__
+web2py.gluon.dal.FireBirdAdapter	web2py.gluon.dal.FireBirdAdapter-class.html
+web2py.gluon.dal.BaseAdapter.represent	web2py.gluon.dal.BaseAdapter-class.html#represent
+web2py.gluon.dal.BaseAdapter.log_execute	web2py.gluon.dal.BaseAdapter-class.html#log_execute
+web2py.gluon.dal.FireBirdAdapter.select_limitby	web2py.gluon.dal.FireBirdAdapter-class.html#select_limitby
+web2py.gluon.dal.FireBirdAdapter._truncate	web2py.gluon.dal.FireBirdAdapter-class.html#_truncate
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.BaseAdapter.LEFT_JOIN	web2py.gluon.dal.BaseAdapter-class.html#LEFT_JOIN
+web2py.gluon.dal.BaseAdapter.distributed_transaction_begin	web2py.gluon.dal.BaseAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.BaseAdapter.GT	web2py.gluon.dal.BaseAdapter-class.html#GT
+web2py.gluon.dal.BaseAdapter.rollback	web2py.gluon.dal.BaseAdapter-class.html#rollback
+web2py.gluon.dal.BaseAdapter.ON	web2py.gluon.dal.BaseAdapter-class.html#ON
+web2py.gluon.dal.BaseAdapter.ALLOW_NULL	web2py.gluon.dal.BaseAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.BaseAdapter.maxcharlength	web2py.gluon.dal.BaseAdapter-class.html#maxcharlength
+web2py.gluon.dal.BaseAdapter.GE	web2py.gluon.dal.BaseAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.FireBirdAdapter._drop	web2py.gluon.dal.FireBirdAdapter-class.html#_drop
+web2py.gluon.dal.BaseAdapter.integrity_error_class	web2py.gluon.dal.BaseAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.BaseAdapter._select	web2py.gluon.dal.BaseAdapter-class.html#_select
+web2py.gluon.dal.BaseAdapter.insert	web2py.gluon.dal.BaseAdapter-class.html#insert
+web2py.gluon.dal.BaseAdapter.execute	web2py.gluon.dal.BaseAdapter-class.html#execute
+web2py.gluon.dal.BaseAdapter.drop	web2py.gluon.dal.BaseAdapter-class.html#drop
+web2py.gluon.dal.BaseAdapter.migrate_table	web2py.gluon.dal.BaseAdapter-class.html#migrate_table
+web2py.gluon.dal.BaseAdapter.concat_add	web2py.gluon.dal.BaseAdapter-class.html#concat_add
+web2py.gluon.dal.BaseAdapter._insert	web2py.gluon.dal.BaseAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.FireBirdAdapter.support_distributed_transaction	web2py.gluon.dal.FireBirdAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.BaseAdapter.OR	web2py.gluon.dal.BaseAdapter-class.html#OR
+web2py.gluon.dal.BaseAdapter.file_delete	web2py.gluon.dal.BaseAdapter-class.html#file_delete
+web2py.gluon.dal.FireBirdAdapter.NOT_NULL	web2py.gluon.dal.FireBirdAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.BaseAdapter.close	web2py.gluon.dal.BaseAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.BaseAdapter.rowslice	web2py.gluon.dal.BaseAdapter-class.html#rowslice
+web2py.gluon.dal.FireBirdAdapter.create_sequence_and_triggers	web2py.gluon.dal.FireBirdAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.BaseAdapter.rollback_prepared	web2py.gluon.dal.BaseAdapter-class.html#rollback_prepared
+web2py.gluon.dal.BaseAdapter.commit_prepared	web2py.gluon.dal.BaseAdapter-class.html#commit_prepared
+web2py.gluon.dal.BaseAdapter.EQ	web2py.gluon.dal.BaseAdapter-class.html#EQ
+web2py.gluon.dal.BaseAdapter.AND	web2py.gluon.dal.BaseAdapter-class.html#AND
+web2py.gluon.dal.BaseAdapter.uploads_in_blob	web2py.gluon.dal.BaseAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.BaseAdapter.NOT	web2py.gluon.dal.BaseAdapter-class.html#NOT
+web2py.gluon.dal.BaseAdapter.commit	web2py.gluon.dal.BaseAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.BaseAdapter.STARTSWITH	web2py.gluon.dal.BaseAdapter-class.html#STARTSWITH
+web2py.gluon.dal.BaseAdapter.SUB	web2py.gluon.dal.BaseAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.BaseAdapter._delete	web2py.gluon.dal.BaseAdapter-class.html#_delete
+web2py.gluon.dal.BaseAdapter.BELONGS	web2py.gluon.dal.BaseAdapter-class.html#BELONGS
+web2py.gluon.dal.BaseAdapter.MUL	web2py.gluon.dal.BaseAdapter-class.html#MUL
+web2py.gluon.dal.BaseAdapter.select	web2py.gluon.dal.BaseAdapter-class.html#select
+web2py.gluon.dal.BaseAdapter.PRIMARY_KEY	web2py.gluon.dal.BaseAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.BaseAdapter.prepare	web2py.gluon.dal.BaseAdapter-class.html#prepare
+web2py.gluon.dal.BaseAdapter.NE	web2py.gluon.dal.BaseAdapter-class.html#NE
+web2py.gluon.dal.FireBirdAdapter.SUBSTRING	web2py.gluon.dal.FireBirdAdapter-class.html#SUBSTRING
+web2py.gluon.dal.BaseAdapter.expand	web2py.gluon.dal.BaseAdapter-class.html#expand
+web2py.gluon.dal.BaseAdapter.EXTRACT	web2py.gluon.dal.BaseAdapter-class.html#EXTRACT
+web2py.gluon.dal.FireBirdAdapter.commit_on_alter_table	web2py.gluon.dal.FireBirdAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.BaseAdapter.represent_exceptions	web2py.gluon.dal.BaseAdapter-class.html#represent_exceptions
+web2py.gluon.dal.FireBirdAdapter.sequence_name	web2py.gluon.dal.FireBirdAdapter-class.html#sequence_name
+web2py.gluon.dal.BaseAdapter.ADD	web2py.gluon.dal.BaseAdapter-class.html#ADD
+web2py.gluon.dal.BaseAdapter.count	web2py.gluon.dal.BaseAdapter-class.html#count
+web2py.gluon.dal.BaseAdapter.UPPER	web2py.gluon.dal.BaseAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.BaseAdapter.LIKE	web2py.gluon.dal.BaseAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.BaseAdapter.file_exists	web2py.gluon.dal.BaseAdapter-class.html#file_exists
+web2py.gluon.dal.BaseAdapter.delete	web2py.gluon.dal.BaseAdapter-class.html#delete
+web2py.gluon.dal.BaseAdapter.LOWER	web2py.gluon.dal.BaseAdapter-class.html#LOWER
+web2py.gluon.dal.BaseAdapter._update	web2py.gluon.dal.BaseAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.BaseAdapter.ENDSWITH	web2py.gluon.dal.BaseAdapter-class.html#ENDSWITH
+web2py.gluon.dal.BaseAdapter.constraint_name	web2py.gluon.dal.BaseAdapter-class.html#constraint_name
+web2py.gluon.dal.BaseAdapter.DIV	web2py.gluon.dal.BaseAdapter-class.html#DIV
+web2py.gluon.dal.FireBirdAdapter.__init__	web2py.gluon.dal.FireBirdAdapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.BaseAdapter.LE	web2py.gluon.dal.BaseAdapter-class.html#LE
+web2py.gluon.dal.BaseAdapter.file_open	web2py.gluon.dal.BaseAdapter-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.BaseAdapter.LT	web2py.gluon.dal.BaseAdapter-class.html#LT
+web2py.gluon.dal.BaseAdapter.COMMA	web2py.gluon.dal.BaseAdapter-class.html#COMMA
+web2py.gluon.dal.BaseAdapter.create_table	web2py.gluon.dal.BaseAdapter-class.html#create_table
+web2py.gluon.dal.BaseAdapter.bulk_insert	web2py.gluon.dal.BaseAdapter-class.html#bulk_insert
+web2py.gluon.dal.BaseAdapter.AGGREGATE	web2py.gluon.dal.BaseAdapter-class.html#AGGREGATE
+web2py.gluon.dal.BaseAdapter.file_close	web2py.gluon.dal.BaseAdapter-class.html#file_close
+web2py.gluon.dal.FireBirdAdapter.RANDOM	web2py.gluon.dal.FireBirdAdapter-class.html#RANDOM
+web2py.gluon.dal.BaseAdapter.truncate	web2py.gluon.dal.BaseAdapter-class.html#truncate
+web2py.gluon.dal.FireBirdAdapter.driver	web2py.gluon.dal.FireBirdAdapter-class.html#driver
+web2py.gluon.dal.BaseAdapter.update	web2py.gluon.dal.BaseAdapter-class.html#update
+web2py.gluon.dal.BaseAdapter.AS	web2py.gluon.dal.BaseAdapter-class.html#AS
+web2py.gluon.dal.FireBirdAdapter.trigger_name	web2py.gluon.dal.FireBirdAdapter-class.html#trigger_name
+web2py.gluon.dal.FireBirdAdapter.types	web2py.gluon.dal.FireBirdAdapter-class.html#types
+web2py.gluon.dal.BaseAdapter._count	web2py.gluon.dal.BaseAdapter-class.html#_count
+web2py.gluon.dal.BaseAdapter.CONTAINS	web2py.gluon.dal.BaseAdapter-class.html#CONTAINS
+web2py.gluon.dal.BaseAdapter.INVERT	web2py.gluon.dal.BaseAdapter-class.html#INVERT
+web2py.gluon.dal.BaseAdapter.alias	web2py.gluon.dal.BaseAdapter-class.html#alias
+web2py.gluon.dal.FireBirdAdapter.lastrowid	web2py.gluon.dal.FireBirdAdapter-class.html#lastrowid
+web2py.gluon.dal.FireBirdEmbeddedAdapter	web2py.gluon.dal.FireBirdEmbeddedAdapter-class.html
+web2py.gluon.dal.BaseAdapter.represent	web2py.gluon.dal.BaseAdapter-class.html#represent
+web2py.gluon.dal.BaseAdapter.log_execute	web2py.gluon.dal.BaseAdapter-class.html#log_execute
+web2py.gluon.dal.FireBirdAdapter.select_limitby	web2py.gluon.dal.FireBirdAdapter-class.html#select_limitby
+web2py.gluon.dal.FireBirdAdapter._truncate	web2py.gluon.dal.FireBirdAdapter-class.html#_truncate
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.BaseAdapter.LEFT_JOIN	web2py.gluon.dal.BaseAdapter-class.html#LEFT_JOIN
+web2py.gluon.dal.BaseAdapter.distributed_transaction_begin	web2py.gluon.dal.BaseAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.BaseAdapter.GT	web2py.gluon.dal.BaseAdapter-class.html#GT
+web2py.gluon.dal.BaseAdapter.rollback	web2py.gluon.dal.BaseAdapter-class.html#rollback
+web2py.gluon.dal.BaseAdapter.ON	web2py.gluon.dal.BaseAdapter-class.html#ON
+web2py.gluon.dal.BaseAdapter.ALLOW_NULL	web2py.gluon.dal.BaseAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.BaseAdapter.maxcharlength	web2py.gluon.dal.BaseAdapter-class.html#maxcharlength
+web2py.gluon.dal.BaseAdapter.GE	web2py.gluon.dal.BaseAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.FireBirdAdapter._drop	web2py.gluon.dal.FireBirdAdapter-class.html#_drop
+web2py.gluon.dal.BaseAdapter.integrity_error_class	web2py.gluon.dal.BaseAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.BaseAdapter._select	web2py.gluon.dal.BaseAdapter-class.html#_select
+web2py.gluon.dal.BaseAdapter.insert	web2py.gluon.dal.BaseAdapter-class.html#insert
+web2py.gluon.dal.BaseAdapter.execute	web2py.gluon.dal.BaseAdapter-class.html#execute
+web2py.gluon.dal.BaseAdapter.drop	web2py.gluon.dal.BaseAdapter-class.html#drop
+web2py.gluon.dal.BaseAdapter.migrate_table	web2py.gluon.dal.BaseAdapter-class.html#migrate_table
+web2py.gluon.dal.BaseAdapter.concat_add	web2py.gluon.dal.BaseAdapter-class.html#concat_add
+web2py.gluon.dal.BaseAdapter._insert	web2py.gluon.dal.BaseAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.FireBirdAdapter.support_distributed_transaction	web2py.gluon.dal.FireBirdAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.BaseAdapter.OR	web2py.gluon.dal.BaseAdapter-class.html#OR
+web2py.gluon.dal.BaseAdapter.file_delete	web2py.gluon.dal.BaseAdapter-class.html#file_delete
+web2py.gluon.dal.FireBirdAdapter.NOT_NULL	web2py.gluon.dal.FireBirdAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.BaseAdapter.close	web2py.gluon.dal.BaseAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.BaseAdapter.rowslice	web2py.gluon.dal.BaseAdapter-class.html#rowslice
+web2py.gluon.dal.FireBirdAdapter.create_sequence_and_triggers	web2py.gluon.dal.FireBirdAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.BaseAdapter.rollback_prepared	web2py.gluon.dal.BaseAdapter-class.html#rollback_prepared
+web2py.gluon.dal.BaseAdapter.commit_prepared	web2py.gluon.dal.BaseAdapter-class.html#commit_prepared
+web2py.gluon.dal.BaseAdapter.EQ	web2py.gluon.dal.BaseAdapter-class.html#EQ
+web2py.gluon.dal.BaseAdapter.AND	web2py.gluon.dal.BaseAdapter-class.html#AND
+web2py.gluon.dal.BaseAdapter.uploads_in_blob	web2py.gluon.dal.BaseAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.BaseAdapter.NOT	web2py.gluon.dal.BaseAdapter-class.html#NOT
+web2py.gluon.dal.BaseAdapter.commit	web2py.gluon.dal.BaseAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.BaseAdapter.STARTSWITH	web2py.gluon.dal.BaseAdapter-class.html#STARTSWITH
+web2py.gluon.dal.BaseAdapter.SUB	web2py.gluon.dal.BaseAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.BaseAdapter._delete	web2py.gluon.dal.BaseAdapter-class.html#_delete
+web2py.gluon.dal.BaseAdapter.BELONGS	web2py.gluon.dal.BaseAdapter-class.html#BELONGS
+web2py.gluon.dal.BaseAdapter.MUL	web2py.gluon.dal.BaseAdapter-class.html#MUL
+web2py.gluon.dal.BaseAdapter.select	web2py.gluon.dal.BaseAdapter-class.html#select
+web2py.gluon.dal.BaseAdapter.PRIMARY_KEY	web2py.gluon.dal.BaseAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.BaseAdapter.prepare	web2py.gluon.dal.BaseAdapter-class.html#prepare
+web2py.gluon.dal.BaseAdapter.NE	web2py.gluon.dal.BaseAdapter-class.html#NE
+web2py.gluon.dal.FireBirdAdapter.SUBSTRING	web2py.gluon.dal.FireBirdAdapter-class.html#SUBSTRING
+web2py.gluon.dal.BaseAdapter.expand	web2py.gluon.dal.BaseAdapter-class.html#expand
+web2py.gluon.dal.BaseAdapter.EXTRACT	web2py.gluon.dal.BaseAdapter-class.html#EXTRACT
+web2py.gluon.dal.FireBirdAdapter.commit_on_alter_table	web2py.gluon.dal.FireBirdAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.BaseAdapter.represent_exceptions	web2py.gluon.dal.BaseAdapter-class.html#represent_exceptions
+web2py.gluon.dal.FireBirdAdapter.sequence_name	web2py.gluon.dal.FireBirdAdapter-class.html#sequence_name
+web2py.gluon.dal.BaseAdapter.ADD	web2py.gluon.dal.BaseAdapter-class.html#ADD
+web2py.gluon.dal.BaseAdapter.count	web2py.gluon.dal.BaseAdapter-class.html#count
+web2py.gluon.dal.BaseAdapter.UPPER	web2py.gluon.dal.BaseAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.BaseAdapter.LIKE	web2py.gluon.dal.BaseAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.BaseAdapter.file_exists	web2py.gluon.dal.BaseAdapter-class.html#file_exists
+web2py.gluon.dal.BaseAdapter.delete	web2py.gluon.dal.BaseAdapter-class.html#delete
+web2py.gluon.dal.BaseAdapter.LOWER	web2py.gluon.dal.BaseAdapter-class.html#LOWER
+web2py.gluon.dal.BaseAdapter._update	web2py.gluon.dal.BaseAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.BaseAdapter.ENDSWITH	web2py.gluon.dal.BaseAdapter-class.html#ENDSWITH
+web2py.gluon.dal.BaseAdapter.constraint_name	web2py.gluon.dal.BaseAdapter-class.html#constraint_name
+web2py.gluon.dal.BaseAdapter.DIV	web2py.gluon.dal.BaseAdapter-class.html#DIV
+web2py.gluon.dal.FireBirdEmbeddedAdapter.__init__	web2py.gluon.dal.FireBirdEmbeddedAdapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.BaseAdapter.LE	web2py.gluon.dal.BaseAdapter-class.html#LE
+web2py.gluon.dal.BaseAdapter.file_open	web2py.gluon.dal.BaseAdapter-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.BaseAdapter.LT	web2py.gluon.dal.BaseAdapter-class.html#LT
+web2py.gluon.dal.BaseAdapter.COMMA	web2py.gluon.dal.BaseAdapter-class.html#COMMA
+web2py.gluon.dal.BaseAdapter.create_table	web2py.gluon.dal.BaseAdapter-class.html#create_table
+web2py.gluon.dal.BaseAdapter.bulk_insert	web2py.gluon.dal.BaseAdapter-class.html#bulk_insert
+web2py.gluon.dal.BaseAdapter.AGGREGATE	web2py.gluon.dal.BaseAdapter-class.html#AGGREGATE
+web2py.gluon.dal.BaseAdapter.file_close	web2py.gluon.dal.BaseAdapter-class.html#file_close
+web2py.gluon.dal.FireBirdAdapter.RANDOM	web2py.gluon.dal.FireBirdAdapter-class.html#RANDOM
+web2py.gluon.dal.BaseAdapter.truncate	web2py.gluon.dal.BaseAdapter-class.html#truncate
+web2py.gluon.dal.FireBirdAdapter.driver	web2py.gluon.dal.FireBirdAdapter-class.html#driver
+web2py.gluon.dal.BaseAdapter.update	web2py.gluon.dal.BaseAdapter-class.html#update
+web2py.gluon.dal.BaseAdapter.AS	web2py.gluon.dal.BaseAdapter-class.html#AS
+web2py.gluon.dal.FireBirdAdapter.trigger_name	web2py.gluon.dal.FireBirdAdapter-class.html#trigger_name
+web2py.gluon.dal.FireBirdAdapter.types	web2py.gluon.dal.FireBirdAdapter-class.html#types
+web2py.gluon.dal.BaseAdapter._count	web2py.gluon.dal.BaseAdapter-class.html#_count
+web2py.gluon.dal.BaseAdapter.CONTAINS	web2py.gluon.dal.BaseAdapter-class.html#CONTAINS
+web2py.gluon.dal.BaseAdapter.INVERT	web2py.gluon.dal.BaseAdapter-class.html#INVERT
+web2py.gluon.dal.BaseAdapter.alias	web2py.gluon.dal.BaseAdapter-class.html#alias
+web2py.gluon.dal.FireBirdAdapter.lastrowid	web2py.gluon.dal.FireBirdAdapter-class.html#lastrowid
+web2py.gluon.dal.GAEDecimalProperty	web2py.gluon.dal.GAEDecimalProperty-class.html
+web2py.gluon.dal.GAEDecimalProperty.make_value_from_datastore	web2py.gluon.dal.GAEDecimalProperty-class.html#make_value_from_datastore
+web2py.gluon.dal.GAEDecimalProperty.validate	web2py.gluon.dal.GAEDecimalProperty-class.html#validate
+web2py.gluon.dal.GAEDecimalProperty.get_value_for_datastore	web2py.gluon.dal.GAEDecimalProperty-class.html#get_value_for_datastore
+web2py.gluon.dal.GAEDecimalProperty.__init__	web2py.gluon.dal.GAEDecimalProperty-class.html#__init__
+web2py.gluon.dal.GAEDecimalProperty.data_type	web2py.gluon.dal.GAEDecimalProperty-class.html#data_type
+web2py.gluon.dal.GAEF	web2py.gluon.dal.GAEF-class.html
+web2py.gluon.dal.GAEF.__repr__	web2py.gluon.dal.GAEF-class.html#__repr__
+web2py.gluon.dal.GAEF.__init__	web2py.gluon.dal.GAEF-class.html#__init__
+web2py.gluon.dal.GoogleDatastoreAdapter	web2py.gluon.dal.GoogleDatastoreAdapter-class.html
+web2py.gluon.dal.NoSQLAdapter.represent	web2py.gluon.dal.NoSQLAdapter-class.html#represent
+web2py.gluon.dal.NoSQLAdapter.log_execute	web2py.gluon.dal.NoSQLAdapter-class.html#log_execute
+web2py.gluon.dal.BaseAdapter.select_limitby	web2py.gluon.dal.BaseAdapter-class.html#select_limitby
+web2py.gluon.dal.BaseAdapter._truncate	web2py.gluon.dal.BaseAdapter-class.html#_truncate
+web2py.gluon.dal.NoSQLAdapter.SUB	web2py.gluon.dal.NoSQLAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.NoSQLAdapter.LEFT_JOIN	web2py.gluon.dal.NoSQLAdapter-class.html#LEFT_JOIN
+web2py.gluon.dal.NoSQLAdapter.distributed_transaction_begin	web2py.gluon.dal.NoSQLAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.GoogleDatastoreAdapter.GT	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#GT
+web2py.gluon.dal.NoSQLAdapter.rollback	web2py.gluon.dal.NoSQLAdapter-class.html#rollback
+web2py.gluon.dal.NoSQLAdapter.ON	web2py.gluon.dal.NoSQLAdapter-class.html#ON
+web2py.gluon.dal.BaseAdapter.ALLOW_NULL	web2py.gluon.dal.BaseAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.BaseAdapter.maxcharlength	web2py.gluon.dal.BaseAdapter-class.html#maxcharlength
+web2py.gluon.dal.GoogleDatastoreAdapter.GE	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.BaseAdapter._drop	web2py.gluon.dal.BaseAdapter-class.html#_drop
+web2py.gluon.dal.NoSQLAdapter.integrity_error_class	web2py.gluon.dal.NoSQLAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.NoSQLAdapter._select	web2py.gluon.dal.NoSQLAdapter-class.html#_select
+web2py.gluon.dal.GoogleDatastoreAdapter.insert	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#insert
+web2py.gluon.dal.NoSQLAdapter.execute	web2py.gluon.dal.NoSQLAdapter-class.html#execute
+web2py.gluon.dal.NoSQLAdapter.drop	web2py.gluon.dal.NoSQLAdapter-class.html#drop
+web2py.gluon.dal.NoSQLAdapter.migrate_table	web2py.gluon.dal.NoSQLAdapter-class.html#migrate_table
+web2py.gluon.dal.NoSQLAdapter.concat_add	web2py.gluon.dal.NoSQLAdapter-class.html#concat_add
+web2py.gluon.dal.NoSQLAdapter._insert	web2py.gluon.dal.NoSQLAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.BaseAdapter.support_distributed_transaction	web2py.gluon.dal.BaseAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.NoSQLAdapter.OR	web2py.gluon.dal.NoSQLAdapter-class.html#OR
+web2py.gluon.dal.BaseAdapter.file_delete	web2py.gluon.dal.BaseAdapter-class.html#file_delete
+web2py.gluon.dal.BaseAdapter.NOT_NULL	web2py.gluon.dal.BaseAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.NoSQLAdapter.close	web2py.gluon.dal.NoSQLAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.NoSQLAdapter.rowslice	web2py.gluon.dal.NoSQLAdapter-class.html#rowslice
+web2py.gluon.dal.NoSQLAdapter.create_sequence_and_triggers	web2py.gluon.dal.NoSQLAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.NoSQLAdapter.rollback_prepared	web2py.gluon.dal.NoSQLAdapter-class.html#rollback_prepared
+web2py.gluon.dal.NoSQLAdapter.commit_prepared	web2py.gluon.dal.NoSQLAdapter-class.html#commit_prepared
+web2py.gluon.dal.GoogleDatastoreAdapter.EQ	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#EQ
+web2py.gluon.dal.GoogleDatastoreAdapter.AND	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#AND
+web2py.gluon.dal.GoogleDatastoreAdapter.uploads_in_blob	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.GoogleDatastoreAdapter.NOT	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#NOT
+web2py.gluon.dal.NoSQLAdapter.commit	web2py.gluon.dal.NoSQLAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.NoSQLAdapter.STARTSWITH	web2py.gluon.dal.NoSQLAdapter-class.html#STARTSWITH
+web2py.gluon.dal.NoSQLAdapter.to_unicode	web2py.gluon.dal.NoSQLAdapter-class.html#to_unicode
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.NoSQLAdapter._delete	web2py.gluon.dal.NoSQLAdapter-class.html#_delete
+web2py.gluon.dal.GoogleDatastoreAdapter.BELONGS	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#BELONGS
+web2py.gluon.dal.NoSQLAdapter.MUL	web2py.gluon.dal.NoSQLAdapter-class.html#MUL
+web2py.gluon.dal.GoogleDatastoreAdapter.select	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#select
+web2py.gluon.dal.NoSQLAdapter.PRIMARY_KEY	web2py.gluon.dal.NoSQLAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.NoSQLAdapter.prepare	web2py.gluon.dal.NoSQLAdapter-class.html#prepare
+web2py.gluon.dal.GoogleDatastoreAdapter.NE	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#NE
+web2py.gluon.dal.NoSQLAdapter.SUBSTRING	web2py.gluon.dal.NoSQLAdapter-class.html#SUBSTRING
+web2py.gluon.dal.GoogleDatastoreAdapter.types	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#types
+web2py.gluon.dal.NoSQLAdapter.EXTRACT	web2py.gluon.dal.NoSQLAdapter-class.html#EXTRACT
+web2py.gluon.dal.BaseAdapter.commit_on_alter_table	web2py.gluon.dal.BaseAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.NoSQLAdapter.represent_exceptions	web2py.gluon.dal.NoSQLAdapter-class.html#represent_exceptions
+web2py.gluon.dal.BaseAdapter.sequence_name	web2py.gluon.dal.BaseAdapter-class.html#sequence_name
+web2py.gluon.dal.NoSQLAdapter.ADD	web2py.gluon.dal.NoSQLAdapter-class.html#ADD
+web2py.gluon.dal.GoogleDatastoreAdapter.count	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#count
+web2py.gluon.dal.NoSQLAdapter.UPPER	web2py.gluon.dal.NoSQLAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.NoSQLAdapter.LIKE	web2py.gluon.dal.NoSQLAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.GoogleDatastoreAdapter.file_exists	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#file_exists
+web2py.gluon.dal.GoogleDatastoreAdapter.delete	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#delete
+web2py.gluon.dal.NoSQLAdapter.LOWER	web2py.gluon.dal.NoSQLAdapter-class.html#LOWER
+web2py.gluon.dal.NoSQLAdapter._update	web2py.gluon.dal.NoSQLAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.NoSQLAdapter.ENDSWITH	web2py.gluon.dal.NoSQLAdapter-class.html#ENDSWITH
+web2py.gluon.dal.NoSQLAdapter.constraint_name	web2py.gluon.dal.NoSQLAdapter-class.html#constraint_name
+web2py.gluon.dal.NoSQLAdapter.DIV	web2py.gluon.dal.NoSQLAdapter-class.html#DIV
+web2py.gluon.dal.GoogleDatastoreAdapter.__init__	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.GoogleDatastoreAdapter.LE	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#LE
+web2py.gluon.dal.GoogleDatastoreAdapter.file_open	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.GoogleDatastoreAdapter.select_raw	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#select_raw
+web2py.gluon.dal.GoogleDatastoreAdapter.LT	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#LT
+web2py.gluon.dal.GoogleDatastoreAdapter.COMMA	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#COMMA
+web2py.gluon.dal.GoogleDatastoreAdapter.create_table	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#create_table
+web2py.gluon.dal.GoogleDatastoreAdapter.bulk_insert	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#bulk_insert
+web2py.gluon.dal.NoSQLAdapter.AGGREGATE	web2py.gluon.dal.NoSQLAdapter-class.html#AGGREGATE
+web2py.gluon.dal.GoogleDatastoreAdapter.file_close	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#file_close
+web2py.gluon.dal.NoSQLAdapter.RANDOM	web2py.gluon.dal.NoSQLAdapter-class.html#RANDOM
+web2py.gluon.dal.GoogleDatastoreAdapter.truncate	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#truncate
+web2py.gluon.dal.BaseAdapter.driver	web2py.gluon.dal.BaseAdapter-class.html#driver
+web2py.gluon.dal.GoogleDatastoreAdapter.update	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#update
+web2py.gluon.dal.NoSQLAdapter.AS	web2py.gluon.dal.NoSQLAdapter-class.html#AS
+web2py.gluon.dal.BaseAdapter.trigger_name	web2py.gluon.dal.BaseAdapter-class.html#trigger_name
+web2py.gluon.dal.GoogleDatastoreAdapter.expand	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#expand
+web2py.gluon.dal.NoSQLAdapter._count	web2py.gluon.dal.NoSQLAdapter-class.html#_count
+web2py.gluon.dal.GoogleDatastoreAdapter.CONTAINS	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#CONTAINS
+web2py.gluon.dal.GoogleDatastoreAdapter.INVERT	web2py.gluon.dal.GoogleDatastoreAdapter-class.html#INVERT
+web2py.gluon.dal.NoSQLAdapter.alias	web2py.gluon.dal.NoSQLAdapter-class.html#alias
+web2py.gluon.dal.NoSQLAdapter.lastrowid	web2py.gluon.dal.NoSQLAdapter-class.html#lastrowid
+web2py.gluon.dal.GoogleSQLAdapter	web2py.gluon.dal.GoogleSQLAdapter-class.html
+web2py.gluon.dal.BaseAdapter.represent	web2py.gluon.dal.BaseAdapter-class.html#represent
+web2py.gluon.dal.BaseAdapter.log_execute	web2py.gluon.dal.BaseAdapter-class.html#log_execute
+web2py.gluon.dal.BaseAdapter.select_limitby	web2py.gluon.dal.BaseAdapter-class.html#select_limitby
+web2py.gluon.dal.BaseAdapter._truncate	web2py.gluon.dal.BaseAdapter-class.html#_truncate
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.BaseAdapter.LEFT_JOIN	web2py.gluon.dal.BaseAdapter-class.html#LEFT_JOIN
+web2py.gluon.dal.MySQLAdapter.distributed_transaction_begin	web2py.gluon.dal.MySQLAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.BaseAdapter.GT	web2py.gluon.dal.BaseAdapter-class.html#GT
+web2py.gluon.dal.BaseAdapter.rollback	web2py.gluon.dal.BaseAdapter-class.html#rollback
+web2py.gluon.dal.BaseAdapter.ON	web2py.gluon.dal.BaseAdapter-class.html#ON
+web2py.gluon.dal.BaseAdapter.ALLOW_NULL	web2py.gluon.dal.BaseAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.MySQLAdapter.maxcharlength	web2py.gluon.dal.MySQLAdapter-class.html#maxcharlength
+web2py.gluon.dal.BaseAdapter.GE	web2py.gluon.dal.BaseAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.MySQLAdapter._drop	web2py.gluon.dal.MySQLAdapter-class.html#_drop
+web2py.gluon.dal.BaseAdapter.integrity_error_class	web2py.gluon.dal.BaseAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.BaseAdapter._select	web2py.gluon.dal.BaseAdapter-class.html#_select
+web2py.gluon.dal.BaseAdapter.insert	web2py.gluon.dal.BaseAdapter-class.html#insert
+web2py.gluon.dal.BaseAdapter.execute	web2py.gluon.dal.BaseAdapter-class.html#execute
+web2py.gluon.dal.BaseAdapter.drop	web2py.gluon.dal.BaseAdapter-class.html#drop
+web2py.gluon.dal.BaseAdapter.migrate_table	web2py.gluon.dal.BaseAdapter-class.html#migrate_table
+web2py.gluon.dal.MySQLAdapter.concat_add	web2py.gluon.dal.MySQLAdapter-class.html#concat_add
+web2py.gluon.dal.BaseAdapter._insert	web2py.gluon.dal.BaseAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.MySQLAdapter.support_distributed_transaction	web2py.gluon.dal.MySQLAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.BaseAdapter.OR	web2py.gluon.dal.BaseAdapter-class.html#OR
+web2py.gluon.dal.UseDatabaseStoredFile.file_delete	web2py.gluon.dal.UseDatabaseStoredFile-class.html#file_delete
+web2py.gluon.dal.BaseAdapter.NOT_NULL	web2py.gluon.dal.BaseAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.BaseAdapter.close	web2py.gluon.dal.BaseAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.BaseAdapter.rowslice	web2py.gluon.dal.BaseAdapter-class.html#rowslice
+web2py.gluon.dal.BaseAdapter.create_sequence_and_triggers	web2py.gluon.dal.BaseAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.MySQLAdapter.rollback_prepared	web2py.gluon.dal.MySQLAdapter-class.html#rollback_prepared
+web2py.gluon.dal.MySQLAdapter.commit_prepared	web2py.gluon.dal.MySQLAdapter-class.html#commit_prepared
+web2py.gluon.dal.BaseAdapter.EQ	web2py.gluon.dal.BaseAdapter-class.html#EQ
+web2py.gluon.dal.BaseAdapter.AND	web2py.gluon.dal.BaseAdapter-class.html#AND
+web2py.gluon.dal.BaseAdapter.uploads_in_blob	web2py.gluon.dal.BaseAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.BaseAdapter.NOT	web2py.gluon.dal.BaseAdapter-class.html#NOT
+web2py.gluon.dal.BaseAdapter.commit	web2py.gluon.dal.BaseAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.BaseAdapter.STARTSWITH	web2py.gluon.dal.BaseAdapter-class.html#STARTSWITH
+web2py.gluon.dal.BaseAdapter.SUB	web2py.gluon.dal.BaseAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.BaseAdapter._delete	web2py.gluon.dal.BaseAdapter-class.html#_delete
+web2py.gluon.dal.BaseAdapter.BELONGS	web2py.gluon.dal.BaseAdapter-class.html#BELONGS
+web2py.gluon.dal.BaseAdapter.MUL	web2py.gluon.dal.BaseAdapter-class.html#MUL
+web2py.gluon.dal.BaseAdapter.select	web2py.gluon.dal.BaseAdapter-class.html#select
+web2py.gluon.dal.BaseAdapter.PRIMARY_KEY	web2py.gluon.dal.BaseAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.MySQLAdapter.prepare	web2py.gluon.dal.MySQLAdapter-class.html#prepare
+web2py.gluon.dal.BaseAdapter.NE	web2py.gluon.dal.BaseAdapter-class.html#NE
+web2py.gluon.dal.MySQLAdapter.SUBSTRING	web2py.gluon.dal.MySQLAdapter-class.html#SUBSTRING
+web2py.gluon.dal.BaseAdapter.expand	web2py.gluon.dal.BaseAdapter-class.html#expand
+web2py.gluon.dal.BaseAdapter.EXTRACT	web2py.gluon.dal.BaseAdapter-class.html#EXTRACT
+web2py.gluon.dal.MySQLAdapter.commit_on_alter_table	web2py.gluon.dal.MySQLAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.BaseAdapter.represent_exceptions	web2py.gluon.dal.BaseAdapter-class.html#represent_exceptions
+web2py.gluon.dal.BaseAdapter.sequence_name	web2py.gluon.dal.BaseAdapter-class.html#sequence_name
+web2py.gluon.dal.BaseAdapter.ADD	web2py.gluon.dal.BaseAdapter-class.html#ADD
+web2py.gluon.dal.BaseAdapter.count	web2py.gluon.dal.BaseAdapter-class.html#count
+web2py.gluon.dal.BaseAdapter.UPPER	web2py.gluon.dal.BaseAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.BaseAdapter.LIKE	web2py.gluon.dal.BaseAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.UseDatabaseStoredFile.file_exists	web2py.gluon.dal.UseDatabaseStoredFile-class.html#file_exists
+web2py.gluon.dal.BaseAdapter.delete	web2py.gluon.dal.BaseAdapter-class.html#delete
+web2py.gluon.dal.BaseAdapter.LOWER	web2py.gluon.dal.BaseAdapter-class.html#LOWER
+web2py.gluon.dal.BaseAdapter._update	web2py.gluon.dal.BaseAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.BaseAdapter.ENDSWITH	web2py.gluon.dal.BaseAdapter-class.html#ENDSWITH
+web2py.gluon.dal.BaseAdapter.constraint_name	web2py.gluon.dal.BaseAdapter-class.html#constraint_name
+web2py.gluon.dal.BaseAdapter.DIV	web2py.gluon.dal.BaseAdapter-class.html#DIV
+web2py.gluon.dal.GoogleSQLAdapter.__init__	web2py.gluon.dal.GoogleSQLAdapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.BaseAdapter.LE	web2py.gluon.dal.BaseAdapter-class.html#LE
+web2py.gluon.dal.UseDatabaseStoredFile.file_open	web2py.gluon.dal.UseDatabaseStoredFile-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.BaseAdapter.LT	web2py.gluon.dal.BaseAdapter-class.html#LT
+web2py.gluon.dal.BaseAdapter.COMMA	web2py.gluon.dal.BaseAdapter-class.html#COMMA
+web2py.gluon.dal.BaseAdapter.create_table	web2py.gluon.dal.BaseAdapter-class.html#create_table
+web2py.gluon.dal.BaseAdapter.bulk_insert	web2py.gluon.dal.BaseAdapter-class.html#bulk_insert
+web2py.gluon.dal.BaseAdapter.AGGREGATE	web2py.gluon.dal.BaseAdapter-class.html#AGGREGATE
+web2py.gluon.dal.UseDatabaseStoredFile.file_close	web2py.gluon.dal.UseDatabaseStoredFile-class.html#file_close
+web2py.gluon.dal.MySQLAdapter.RANDOM	web2py.gluon.dal.MySQLAdapter-class.html#RANDOM
+web2py.gluon.dal.BaseAdapter.truncate	web2py.gluon.dal.BaseAdapter-class.html#truncate
+web2py.gluon.dal.MySQLAdapter.driver	web2py.gluon.contrib.pymysql-module.html
+web2py.gluon.dal.BaseAdapter.update	web2py.gluon.dal.BaseAdapter-class.html#update
+web2py.gluon.dal.BaseAdapter.AS	web2py.gluon.dal.BaseAdapter-class.html#AS
+web2py.gluon.dal.BaseAdapter.trigger_name	web2py.gluon.dal.BaseAdapter-class.html#trigger_name
+web2py.gluon.dal.MySQLAdapter.types	web2py.gluon.dal.MySQLAdapter-class.html#types
+web2py.gluon.dal.BaseAdapter._count	web2py.gluon.dal.BaseAdapter-class.html#_count
+web2py.gluon.dal.BaseAdapter.CONTAINS	web2py.gluon.dal.BaseAdapter-class.html#CONTAINS
+web2py.gluon.dal.BaseAdapter.INVERT	web2py.gluon.dal.BaseAdapter-class.html#INVERT
+web2py.gluon.dal.BaseAdapter.alias	web2py.gluon.dal.BaseAdapter-class.html#alias
+web2py.gluon.dal.MySQLAdapter.lastrowid	web2py.gluon.dal.MySQLAdapter-class.html#lastrowid
+web2py.gluon.dal.InformixAdapter	web2py.gluon.dal.InformixAdapter-class.html
+web2py.gluon.dal.BaseAdapter.represent	web2py.gluon.dal.BaseAdapter-class.html#represent
+web2py.gluon.dal.BaseAdapter.log_execute	web2py.gluon.dal.BaseAdapter-class.html#log_execute
+web2py.gluon.dal.InformixAdapter.select_limitby	web2py.gluon.dal.InformixAdapter-class.html#select_limitby
+web2py.gluon.dal.BaseAdapter._truncate	web2py.gluon.dal.BaseAdapter-class.html#_truncate
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.BaseAdapter.LEFT_JOIN	web2py.gluon.dal.BaseAdapter-class.html#LEFT_JOIN
+web2py.gluon.dal.BaseAdapter.distributed_transaction_begin	web2py.gluon.dal.BaseAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.BaseAdapter.GT	web2py.gluon.dal.BaseAdapter-class.html#GT
+web2py.gluon.dal.BaseAdapter.rollback	web2py.gluon.dal.BaseAdapter-class.html#rollback
+web2py.gluon.dal.BaseAdapter.ON	web2py.gluon.dal.BaseAdapter-class.html#ON
+web2py.gluon.dal.BaseAdapter.ALLOW_NULL	web2py.gluon.dal.BaseAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.BaseAdapter.maxcharlength	web2py.gluon.dal.BaseAdapter-class.html#maxcharlength
+web2py.gluon.dal.BaseAdapter.GE	web2py.gluon.dal.BaseAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.BaseAdapter._drop	web2py.gluon.dal.BaseAdapter-class.html#_drop
+web2py.gluon.dal.InformixAdapter.integrity_error_class	web2py.gluon.dal.InformixAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.BaseAdapter._select	web2py.gluon.dal.BaseAdapter-class.html#_select
+web2py.gluon.dal.BaseAdapter.insert	web2py.gluon.dal.BaseAdapter-class.html#insert
+web2py.gluon.dal.InformixAdapter.execute	web2py.gluon.dal.InformixAdapter-class.html#execute
+web2py.gluon.dal.BaseAdapter.drop	web2py.gluon.dal.BaseAdapter-class.html#drop
+web2py.gluon.dal.BaseAdapter.migrate_table	web2py.gluon.dal.BaseAdapter-class.html#migrate_table
+web2py.gluon.dal.BaseAdapter.concat_add	web2py.gluon.dal.BaseAdapter-class.html#concat_add
+web2py.gluon.dal.BaseAdapter._insert	web2py.gluon.dal.BaseAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.BaseAdapter.support_distributed_transaction	web2py.gluon.dal.BaseAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.BaseAdapter.OR	web2py.gluon.dal.BaseAdapter-class.html#OR
+web2py.gluon.dal.BaseAdapter.file_delete	web2py.gluon.dal.BaseAdapter-class.html#file_delete
+web2py.gluon.dal.InformixAdapter.NOT_NULL	web2py.gluon.dal.InformixAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.BaseAdapter.close	web2py.gluon.dal.BaseAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.BaseAdapter.rowslice	web2py.gluon.dal.BaseAdapter-class.html#rowslice
+web2py.gluon.dal.BaseAdapter.create_sequence_and_triggers	web2py.gluon.dal.BaseAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.BaseAdapter.rollback_prepared	web2py.gluon.dal.BaseAdapter-class.html#rollback_prepared
+web2py.gluon.dal.BaseAdapter.commit_prepared	web2py.gluon.dal.BaseAdapter-class.html#commit_prepared
+web2py.gluon.dal.BaseAdapter.EQ	web2py.gluon.dal.BaseAdapter-class.html#EQ
+web2py.gluon.dal.BaseAdapter.AND	web2py.gluon.dal.BaseAdapter-class.html#AND
+web2py.gluon.dal.BaseAdapter.uploads_in_blob	web2py.gluon.dal.BaseAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.BaseAdapter.NOT	web2py.gluon.dal.BaseAdapter-class.html#NOT
+web2py.gluon.dal.BaseAdapter.commit	web2py.gluon.dal.BaseAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.BaseAdapter.STARTSWITH	web2py.gluon.dal.BaseAdapter-class.html#STARTSWITH
+web2py.gluon.dal.BaseAdapter.SUB	web2py.gluon.dal.BaseAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.BaseAdapter._delete	web2py.gluon.dal.BaseAdapter-class.html#_delete
+web2py.gluon.dal.BaseAdapter.BELONGS	web2py.gluon.dal.BaseAdapter-class.html#BELONGS
+web2py.gluon.dal.BaseAdapter.MUL	web2py.gluon.dal.BaseAdapter-class.html#MUL
+web2py.gluon.dal.BaseAdapter.select	web2py.gluon.dal.BaseAdapter-class.html#select
+web2py.gluon.dal.BaseAdapter.PRIMARY_KEY	web2py.gluon.dal.BaseAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.BaseAdapter.prepare	web2py.gluon.dal.BaseAdapter-class.html#prepare
+web2py.gluon.dal.BaseAdapter.NE	web2py.gluon.dal.BaseAdapter-class.html#NE
+web2py.gluon.dal.BaseAdapter.SUBSTRING	web2py.gluon.dal.BaseAdapter-class.html#SUBSTRING
+web2py.gluon.dal.InformixAdapter.types	web2py.gluon.dal.InformixAdapter-class.html#types
+web2py.gluon.dal.BaseAdapter.EXTRACT	web2py.gluon.dal.BaseAdapter-class.html#EXTRACT
+web2py.gluon.dal.BaseAdapter.commit_on_alter_table	web2py.gluon.dal.BaseAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.InformixAdapter.represent_exceptions	web2py.gluon.dal.InformixAdapter-class.html#represent_exceptions
+web2py.gluon.dal.BaseAdapter.sequence_name	web2py.gluon.dal.BaseAdapter-class.html#sequence_name
+web2py.gluon.dal.BaseAdapter.ADD	web2py.gluon.dal.BaseAdapter-class.html#ADD
+web2py.gluon.dal.BaseAdapter.count	web2py.gluon.dal.BaseAdapter-class.html#count
+web2py.gluon.dal.BaseAdapter.UPPER	web2py.gluon.dal.BaseAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.BaseAdapter.LIKE	web2py.gluon.dal.BaseAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.BaseAdapter.file_exists	web2py.gluon.dal.BaseAdapter-class.html#file_exists
+web2py.gluon.dal.BaseAdapter.delete	web2py.gluon.dal.BaseAdapter-class.html#delete
+web2py.gluon.dal.BaseAdapter.LOWER	web2py.gluon.dal.BaseAdapter-class.html#LOWER
+web2py.gluon.dal.BaseAdapter._update	web2py.gluon.dal.BaseAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.BaseAdapter.ENDSWITH	web2py.gluon.dal.BaseAdapter-class.html#ENDSWITH
+web2py.gluon.dal.BaseAdapter.constraint_name	web2py.gluon.dal.BaseAdapter-class.html#constraint_name
+web2py.gluon.dal.BaseAdapter.DIV	web2py.gluon.dal.BaseAdapter-class.html#DIV
+web2py.gluon.dal.InformixAdapter.__init__	web2py.gluon.dal.InformixAdapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.BaseAdapter.LE	web2py.gluon.dal.BaseAdapter-class.html#LE
+web2py.gluon.dal.BaseAdapter.file_open	web2py.gluon.dal.BaseAdapter-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.BaseAdapter.LT	web2py.gluon.dal.BaseAdapter-class.html#LT
+web2py.gluon.dal.BaseAdapter.COMMA	web2py.gluon.dal.BaseAdapter-class.html#COMMA
+web2py.gluon.dal.BaseAdapter.create_table	web2py.gluon.dal.BaseAdapter-class.html#create_table
+web2py.gluon.dal.BaseAdapter.bulk_insert	web2py.gluon.dal.BaseAdapter-class.html#bulk_insert
+web2py.gluon.dal.BaseAdapter.AGGREGATE	web2py.gluon.dal.BaseAdapter-class.html#AGGREGATE
+web2py.gluon.dal.BaseAdapter.file_close	web2py.gluon.dal.BaseAdapter-class.html#file_close
+web2py.gluon.dal.InformixAdapter.RANDOM	web2py.gluon.dal.InformixAdapter-class.html#RANDOM
+web2py.gluon.dal.BaseAdapter.truncate	web2py.gluon.dal.BaseAdapter-class.html#truncate
+web2py.gluon.dal.InformixAdapter.driver	web2py.gluon.dal.InformixAdapter-class.html#driver
+web2py.gluon.dal.BaseAdapter.update	web2py.gluon.dal.BaseAdapter-class.html#update
+web2py.gluon.dal.BaseAdapter.AS	web2py.gluon.dal.BaseAdapter-class.html#AS
+web2py.gluon.dal.BaseAdapter.trigger_name	web2py.gluon.dal.BaseAdapter-class.html#trigger_name
+web2py.gluon.dal.BaseAdapter.expand	web2py.gluon.dal.BaseAdapter-class.html#expand
+web2py.gluon.dal.BaseAdapter._count	web2py.gluon.dal.BaseAdapter-class.html#_count
+web2py.gluon.dal.BaseAdapter.CONTAINS	web2py.gluon.dal.BaseAdapter-class.html#CONTAINS
+web2py.gluon.dal.BaseAdapter.INVERT	web2py.gluon.dal.BaseAdapter-class.html#INVERT
+web2py.gluon.dal.BaseAdapter.alias	web2py.gluon.dal.BaseAdapter-class.html#alias
+web2py.gluon.dal.InformixAdapter.lastrowid	web2py.gluon.dal.InformixAdapter-class.html#lastrowid
+web2py.gluon.dal.IngresAdapter	web2py.gluon.dal.IngresAdapter-class.html
+web2py.gluon.dal.BaseAdapter.represent	web2py.gluon.dal.BaseAdapter-class.html#represent
+web2py.gluon.dal.BaseAdapter.log_execute	web2py.gluon.dal.BaseAdapter-class.html#log_execute
+web2py.gluon.dal.IngresAdapter.select_limitby	web2py.gluon.dal.IngresAdapter-class.html#select_limitby
+web2py.gluon.dal.BaseAdapter._truncate	web2py.gluon.dal.BaseAdapter-class.html#_truncate
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.IngresAdapter.LEFT_JOIN	web2py.gluon.dal.IngresAdapter-class.html#LEFT_JOIN
+web2py.gluon.dal.BaseAdapter.distributed_transaction_begin	web2py.gluon.dal.BaseAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.BaseAdapter.GT	web2py.gluon.dal.BaseAdapter-class.html#GT
+web2py.gluon.dal.BaseAdapter.rollback	web2py.gluon.dal.BaseAdapter-class.html#rollback
+web2py.gluon.dal.BaseAdapter.ON	web2py.gluon.dal.BaseAdapter-class.html#ON
+web2py.gluon.dal.IngresAdapter.RANDOM	web2py.gluon.dal.IngresAdapter-class.html#RANDOM
+web2py.gluon.dal.BaseAdapter.maxcharlength	web2py.gluon.dal.BaseAdapter-class.html#maxcharlength
+web2py.gluon.dal.BaseAdapter.GE	web2py.gluon.dal.BaseAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.BaseAdapter._drop	web2py.gluon.dal.BaseAdapter-class.html#_drop
+web2py.gluon.dal.IngresAdapter.integrity_error_class	web2py.gluon.dal.IngresAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.BaseAdapter._select	web2py.gluon.dal.BaseAdapter-class.html#_select
+web2py.gluon.dal.BaseAdapter.insert	web2py.gluon.dal.BaseAdapter-class.html#insert
+web2py.gluon.dal.BaseAdapter.execute	web2py.gluon.dal.BaseAdapter-class.html#execute
+web2py.gluon.dal.BaseAdapter.drop	web2py.gluon.dal.BaseAdapter-class.html#drop
+web2py.gluon.dal.BaseAdapter.migrate_table	web2py.gluon.dal.BaseAdapter-class.html#migrate_table
+web2py.gluon.dal.BaseAdapter.concat_add	web2py.gluon.dal.BaseAdapter-class.html#concat_add
+web2py.gluon.dal.BaseAdapter._insert	web2py.gluon.dal.BaseAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.BaseAdapter.support_distributed_transaction	web2py.gluon.dal.BaseAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.BaseAdapter.OR	web2py.gluon.dal.BaseAdapter-class.html#OR
+web2py.gluon.dal.BaseAdapter.file_delete	web2py.gluon.dal.BaseAdapter-class.html#file_delete
+web2py.gluon.dal.BaseAdapter.NOT_NULL	web2py.gluon.dal.BaseAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.BaseAdapter.close	web2py.gluon.dal.BaseAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.BaseAdapter.rowslice	web2py.gluon.dal.BaseAdapter-class.html#rowslice
+web2py.gluon.dal.IngresAdapter.create_sequence_and_triggers	web2py.gluon.dal.IngresAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.BaseAdapter.rollback_prepared	web2py.gluon.dal.BaseAdapter-class.html#rollback_prepared
+web2py.gluon.dal.BaseAdapter.commit_prepared	web2py.gluon.dal.BaseAdapter-class.html#commit_prepared
+web2py.gluon.dal.BaseAdapter.EQ	web2py.gluon.dal.BaseAdapter-class.html#EQ
+web2py.gluon.dal.BaseAdapter.AND	web2py.gluon.dal.BaseAdapter-class.html#AND
+web2py.gluon.dal.BaseAdapter.uploads_in_blob	web2py.gluon.dal.BaseAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.BaseAdapter.NOT	web2py.gluon.dal.BaseAdapter-class.html#NOT
+web2py.gluon.dal.BaseAdapter.commit	web2py.gluon.dal.BaseAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.BaseAdapter.STARTSWITH	web2py.gluon.dal.BaseAdapter-class.html#STARTSWITH
+web2py.gluon.dal.BaseAdapter.SUB	web2py.gluon.dal.BaseAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.BaseAdapter._delete	web2py.gluon.dal.BaseAdapter-class.html#_delete
+web2py.gluon.dal.BaseAdapter.BELONGS	web2py.gluon.dal.BaseAdapter-class.html#BELONGS
+web2py.gluon.dal.BaseAdapter.MUL	web2py.gluon.dal.BaseAdapter-class.html#MUL
+web2py.gluon.dal.BaseAdapter.select	web2py.gluon.dal.BaseAdapter-class.html#select
+web2py.gluon.dal.BaseAdapter.PRIMARY_KEY	web2py.gluon.dal.BaseAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.BaseAdapter.prepare	web2py.gluon.dal.BaseAdapter-class.html#prepare
+web2py.gluon.dal.BaseAdapter.NE	web2py.gluon.dal.BaseAdapter-class.html#NE
+web2py.gluon.dal.BaseAdapter.SUBSTRING	web2py.gluon.dal.BaseAdapter-class.html#SUBSTRING
+web2py.gluon.dal.IngresAdapter.types	web2py.gluon.dal.IngresAdapter-class.html#types
+web2py.gluon.dal.BaseAdapter.EXTRACT	web2py.gluon.dal.BaseAdapter-class.html#EXTRACT
+web2py.gluon.dal.BaseAdapter.commit_on_alter_table	web2py.gluon.dal.BaseAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.BaseAdapter.represent_exceptions	web2py.gluon.dal.BaseAdapter-class.html#represent_exceptions
+web2py.gluon.dal.BaseAdapter.sequence_name	web2py.gluon.dal.BaseAdapter-class.html#sequence_name
+web2py.gluon.dal.BaseAdapter.ADD	web2py.gluon.dal.BaseAdapter-class.html#ADD
+web2py.gluon.dal.BaseAdapter.count	web2py.gluon.dal.BaseAdapter-class.html#count
+web2py.gluon.dal.BaseAdapter.UPPER	web2py.gluon.dal.BaseAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.BaseAdapter.LIKE	web2py.gluon.dal.BaseAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.BaseAdapter.file_exists	web2py.gluon.dal.BaseAdapter-class.html#file_exists
+web2py.gluon.dal.BaseAdapter.delete	web2py.gluon.dal.BaseAdapter-class.html#delete
+web2py.gluon.dal.BaseAdapter.LOWER	web2py.gluon.dal.BaseAdapter-class.html#LOWER
+web2py.gluon.dal.BaseAdapter._update	web2py.gluon.dal.BaseAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.BaseAdapter.ENDSWITH	web2py.gluon.dal.BaseAdapter-class.html#ENDSWITH
+web2py.gluon.dal.BaseAdapter.constraint_name	web2py.gluon.dal.BaseAdapter-class.html#constraint_name
+web2py.gluon.dal.BaseAdapter.DIV	web2py.gluon.dal.BaseAdapter-class.html#DIV
+web2py.gluon.dal.IngresAdapter.__init__	web2py.gluon.dal.IngresAdapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.BaseAdapter.LE	web2py.gluon.dal.BaseAdapter-class.html#LE
+web2py.gluon.dal.BaseAdapter.file_open	web2py.gluon.dal.BaseAdapter-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.BaseAdapter.LT	web2py.gluon.dal.BaseAdapter-class.html#LT
+web2py.gluon.dal.BaseAdapter.COMMA	web2py.gluon.dal.BaseAdapter-class.html#COMMA
+web2py.gluon.dal.BaseAdapter.create_table	web2py.gluon.dal.BaseAdapter-class.html#create_table
+web2py.gluon.dal.BaseAdapter.bulk_insert	web2py.gluon.dal.BaseAdapter-class.html#bulk_insert
+web2py.gluon.dal.BaseAdapter.AGGREGATE	web2py.gluon.dal.BaseAdapter-class.html#AGGREGATE
+web2py.gluon.dal.BaseAdapter.file_close	web2py.gluon.dal.BaseAdapter-class.html#file_close
+web2py.gluon.dal.BaseAdapter.ALLOW_NULL	web2py.gluon.dal.BaseAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.BaseAdapter.truncate	web2py.gluon.dal.BaseAdapter-class.html#truncate
+web2py.gluon.dal.IngresAdapter.driver	web2py.gluon.dal.IngresAdapter-class.html#driver
+web2py.gluon.dal.BaseAdapter.update	web2py.gluon.dal.BaseAdapter-class.html#update
+web2py.gluon.dal.BaseAdapter.AS	web2py.gluon.dal.BaseAdapter-class.html#AS
+web2py.gluon.dal.BaseAdapter.trigger_name	web2py.gluon.dal.BaseAdapter-class.html#trigger_name
+web2py.gluon.dal.BaseAdapter.expand	web2py.gluon.dal.BaseAdapter-class.html#expand
+web2py.gluon.dal.BaseAdapter._count	web2py.gluon.dal.BaseAdapter-class.html#_count
+web2py.gluon.dal.BaseAdapter.CONTAINS	web2py.gluon.dal.BaseAdapter-class.html#CONTAINS
+web2py.gluon.dal.BaseAdapter.INVERT	web2py.gluon.dal.BaseAdapter-class.html#INVERT
+web2py.gluon.dal.BaseAdapter.alias	web2py.gluon.dal.BaseAdapter-class.html#alias
+web2py.gluon.dal.IngresAdapter.lastrowid	web2py.gluon.dal.IngresAdapter-class.html#lastrowid
+web2py.gluon.dal.IngresUnicodeAdapter	web2py.gluon.dal.IngresUnicodeAdapter-class.html
+web2py.gluon.dal.BaseAdapter.represent	web2py.gluon.dal.BaseAdapter-class.html#represent
+web2py.gluon.dal.BaseAdapter.log_execute	web2py.gluon.dal.BaseAdapter-class.html#log_execute
+web2py.gluon.dal.IngresAdapter.select_limitby	web2py.gluon.dal.IngresAdapter-class.html#select_limitby
+web2py.gluon.dal.BaseAdapter._truncate	web2py.gluon.dal.BaseAdapter-class.html#_truncate
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.IngresAdapter.LEFT_JOIN	web2py.gluon.dal.IngresAdapter-class.html#LEFT_JOIN
+web2py.gluon.dal.BaseAdapter.distributed_transaction_begin	web2py.gluon.dal.BaseAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.BaseAdapter.GT	web2py.gluon.dal.BaseAdapter-class.html#GT
+web2py.gluon.dal.BaseAdapter.rollback	web2py.gluon.dal.BaseAdapter-class.html#rollback
+web2py.gluon.dal.BaseAdapter.ON	web2py.gluon.dal.BaseAdapter-class.html#ON
+web2py.gluon.dal.IngresAdapter.RANDOM	web2py.gluon.dal.IngresAdapter-class.html#RANDOM
+web2py.gluon.dal.BaseAdapter.maxcharlength	web2py.gluon.dal.BaseAdapter-class.html#maxcharlength
+web2py.gluon.dal.BaseAdapter.GE	web2py.gluon.dal.BaseAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.BaseAdapter._drop	web2py.gluon.dal.BaseAdapter-class.html#_drop
+web2py.gluon.dal.IngresAdapter.integrity_error_class	web2py.gluon.dal.IngresAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.BaseAdapter._select	web2py.gluon.dal.BaseAdapter-class.html#_select
+web2py.gluon.dal.BaseAdapter.insert	web2py.gluon.dal.BaseAdapter-class.html#insert
+web2py.gluon.dal.BaseAdapter.execute	web2py.gluon.dal.BaseAdapter-class.html#execute
+web2py.gluon.dal.BaseAdapter.drop	web2py.gluon.dal.BaseAdapter-class.html#drop
+web2py.gluon.dal.BaseAdapter.migrate_table	web2py.gluon.dal.BaseAdapter-class.html#migrate_table
+web2py.gluon.dal.BaseAdapter.concat_add	web2py.gluon.dal.BaseAdapter-class.html#concat_add
+web2py.gluon.dal.BaseAdapter._insert	web2py.gluon.dal.BaseAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.BaseAdapter.support_distributed_transaction	web2py.gluon.dal.BaseAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.BaseAdapter.OR	web2py.gluon.dal.BaseAdapter-class.html#OR
+web2py.gluon.dal.BaseAdapter.file_delete	web2py.gluon.dal.BaseAdapter-class.html#file_delete
+web2py.gluon.dal.BaseAdapter.NOT_NULL	web2py.gluon.dal.BaseAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.BaseAdapter.close	web2py.gluon.dal.BaseAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.BaseAdapter.rowslice	web2py.gluon.dal.BaseAdapter-class.html#rowslice
+web2py.gluon.dal.IngresAdapter.create_sequence_and_triggers	web2py.gluon.dal.IngresAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.BaseAdapter.rollback_prepared	web2py.gluon.dal.BaseAdapter-class.html#rollback_prepared
+web2py.gluon.dal.BaseAdapter.commit_prepared	web2py.gluon.dal.BaseAdapter-class.html#commit_prepared
+web2py.gluon.dal.BaseAdapter.EQ	web2py.gluon.dal.BaseAdapter-class.html#EQ
+web2py.gluon.dal.BaseAdapter.AND	web2py.gluon.dal.BaseAdapter-class.html#AND
+web2py.gluon.dal.BaseAdapter.uploads_in_blob	web2py.gluon.dal.BaseAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.BaseAdapter.NOT	web2py.gluon.dal.BaseAdapter-class.html#NOT
+web2py.gluon.dal.BaseAdapter.commit	web2py.gluon.dal.BaseAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.BaseAdapter.STARTSWITH	web2py.gluon.dal.BaseAdapter-class.html#STARTSWITH
+web2py.gluon.dal.BaseAdapter.SUB	web2py.gluon.dal.BaseAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.BaseAdapter._delete	web2py.gluon.dal.BaseAdapter-class.html#_delete
+web2py.gluon.dal.BaseAdapter.BELONGS	web2py.gluon.dal.BaseAdapter-class.html#BELONGS
+web2py.gluon.dal.BaseAdapter.MUL	web2py.gluon.dal.BaseAdapter-class.html#MUL
+web2py.gluon.dal.BaseAdapter.select	web2py.gluon.dal.BaseAdapter-class.html#select
+web2py.gluon.dal.BaseAdapter.PRIMARY_KEY	web2py.gluon.dal.BaseAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.BaseAdapter.prepare	web2py.gluon.dal.BaseAdapter-class.html#prepare
+web2py.gluon.dal.BaseAdapter.NE	web2py.gluon.dal.BaseAdapter-class.html#NE
+web2py.gluon.dal.BaseAdapter.SUBSTRING	web2py.gluon.dal.BaseAdapter-class.html#SUBSTRING
+web2py.gluon.dal.IngresUnicodeAdapter.types	web2py.gluon.dal.IngresUnicodeAdapter-class.html#types
+web2py.gluon.dal.BaseAdapter.EXTRACT	web2py.gluon.dal.BaseAdapter-class.html#EXTRACT
+web2py.gluon.dal.BaseAdapter.commit_on_alter_table	web2py.gluon.dal.BaseAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.BaseAdapter.represent_exceptions	web2py.gluon.dal.BaseAdapter-class.html#represent_exceptions
+web2py.gluon.dal.BaseAdapter.sequence_name	web2py.gluon.dal.BaseAdapter-class.html#sequence_name
+web2py.gluon.dal.BaseAdapter.ADD	web2py.gluon.dal.BaseAdapter-class.html#ADD
+web2py.gluon.dal.BaseAdapter.count	web2py.gluon.dal.BaseAdapter-class.html#count
+web2py.gluon.dal.BaseAdapter.UPPER	web2py.gluon.dal.BaseAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.BaseAdapter.LIKE	web2py.gluon.dal.BaseAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.BaseAdapter.file_exists	web2py.gluon.dal.BaseAdapter-class.html#file_exists
+web2py.gluon.dal.BaseAdapter.delete	web2py.gluon.dal.BaseAdapter-class.html#delete
+web2py.gluon.dal.BaseAdapter.LOWER	web2py.gluon.dal.BaseAdapter-class.html#LOWER
+web2py.gluon.dal.BaseAdapter._update	web2py.gluon.dal.BaseAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.BaseAdapter.ENDSWITH	web2py.gluon.dal.BaseAdapter-class.html#ENDSWITH
+web2py.gluon.dal.BaseAdapter.constraint_name	web2py.gluon.dal.BaseAdapter-class.html#constraint_name
+web2py.gluon.dal.BaseAdapter.DIV	web2py.gluon.dal.BaseAdapter-class.html#DIV
+web2py.gluon.dal.IngresAdapter.__init__	web2py.gluon.dal.IngresAdapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.BaseAdapter.LE	web2py.gluon.dal.BaseAdapter-class.html#LE
+web2py.gluon.dal.BaseAdapter.file_open	web2py.gluon.dal.BaseAdapter-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.BaseAdapter.LT	web2py.gluon.dal.BaseAdapter-class.html#LT
+web2py.gluon.dal.BaseAdapter.COMMA	web2py.gluon.dal.BaseAdapter-class.html#COMMA
+web2py.gluon.dal.BaseAdapter.create_table	web2py.gluon.dal.BaseAdapter-class.html#create_table
+web2py.gluon.dal.BaseAdapter.bulk_insert	web2py.gluon.dal.BaseAdapter-class.html#bulk_insert
+web2py.gluon.dal.BaseAdapter.AGGREGATE	web2py.gluon.dal.BaseAdapter-class.html#AGGREGATE
+web2py.gluon.dal.BaseAdapter.file_close	web2py.gluon.dal.BaseAdapter-class.html#file_close
+web2py.gluon.dal.BaseAdapter.ALLOW_NULL	web2py.gluon.dal.BaseAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.BaseAdapter.truncate	web2py.gluon.dal.BaseAdapter-class.html#truncate
+web2py.gluon.dal.IngresAdapter.driver	web2py.gluon.dal.IngresAdapter-class.html#driver
+web2py.gluon.dal.BaseAdapter.update	web2py.gluon.dal.BaseAdapter-class.html#update
+web2py.gluon.dal.BaseAdapter.AS	web2py.gluon.dal.BaseAdapter-class.html#AS
+web2py.gluon.dal.BaseAdapter.trigger_name	web2py.gluon.dal.BaseAdapter-class.html#trigger_name
+web2py.gluon.dal.BaseAdapter.expand	web2py.gluon.dal.BaseAdapter-class.html#expand
+web2py.gluon.dal.BaseAdapter._count	web2py.gluon.dal.BaseAdapter-class.html#_count
+web2py.gluon.dal.BaseAdapter.CONTAINS	web2py.gluon.dal.BaseAdapter-class.html#CONTAINS
+web2py.gluon.dal.BaseAdapter.INVERT	web2py.gluon.dal.BaseAdapter-class.html#INVERT
+web2py.gluon.dal.BaseAdapter.alias	web2py.gluon.dal.BaseAdapter-class.html#alias
+web2py.gluon.dal.IngresAdapter.lastrowid	web2py.gluon.dal.IngresAdapter-class.html#lastrowid
+web2py.gluon.dal.JDBCPostgreSQLAdapter	web2py.gluon.dal.JDBCPostgreSQLAdapter-class.html
+web2py.gluon.dal.BaseAdapter.represent	web2py.gluon.dal.BaseAdapter-class.html#represent
+web2py.gluon.dal.BaseAdapter.log_execute	web2py.gluon.dal.BaseAdapter-class.html#log_execute
+web2py.gluon.dal.BaseAdapter.select_limitby	web2py.gluon.dal.BaseAdapter-class.html#select_limitby
+web2py.gluon.dal.BaseAdapter._truncate	web2py.gluon.dal.BaseAdapter-class.html#_truncate
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.BaseAdapter.LEFT_JOIN	web2py.gluon.dal.BaseAdapter-class.html#LEFT_JOIN
+web2py.gluon.dal.PostgreSQLAdapter.distributed_transaction_begin	web2py.gluon.dal.PostgreSQLAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.BaseAdapter.GT	web2py.gluon.dal.BaseAdapter-class.html#GT
+web2py.gluon.dal.BaseAdapter.rollback	web2py.gluon.dal.BaseAdapter-class.html#rollback
+web2py.gluon.dal.BaseAdapter.ON	web2py.gluon.dal.BaseAdapter-class.html#ON
+web2py.gluon.dal.BaseAdapter.ALLOW_NULL	web2py.gluon.dal.BaseAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.BaseAdapter.maxcharlength	web2py.gluon.dal.BaseAdapter-class.html#maxcharlength
+web2py.gluon.dal.BaseAdapter.GE	web2py.gluon.dal.BaseAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.BaseAdapter._drop	web2py.gluon.dal.BaseAdapter-class.html#_drop
+web2py.gluon.dal.BaseAdapter.integrity_error_class	web2py.gluon.dal.BaseAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.BaseAdapter._select	web2py.gluon.dal.BaseAdapter-class.html#_select
+web2py.gluon.dal.BaseAdapter.insert	web2py.gluon.dal.BaseAdapter-class.html#insert
+web2py.gluon.dal.BaseAdapter.execute	web2py.gluon.dal.BaseAdapter-class.html#execute
+web2py.gluon.dal.BaseAdapter.drop	web2py.gluon.dal.BaseAdapter-class.html#drop
+web2py.gluon.dal.BaseAdapter.migrate_table	web2py.gluon.dal.BaseAdapter-class.html#migrate_table
+web2py.gluon.dal.BaseAdapter.concat_add	web2py.gluon.dal.BaseAdapter-class.html#concat_add
+web2py.gluon.dal.BaseAdapter._insert	web2py.gluon.dal.BaseAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.PostgreSQLAdapter.support_distributed_transaction	web2py.gluon.dal.PostgreSQLAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.BaseAdapter.OR	web2py.gluon.dal.BaseAdapter-class.html#OR
+web2py.gluon.dal.BaseAdapter.file_delete	web2py.gluon.dal.BaseAdapter-class.html#file_delete
+web2py.gluon.dal.BaseAdapter.NOT_NULL	web2py.gluon.dal.BaseAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.BaseAdapter.close	web2py.gluon.dal.BaseAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.BaseAdapter.rowslice	web2py.gluon.dal.BaseAdapter-class.html#rowslice
+web2py.gluon.dal.PostgreSQLAdapter.create_sequence_and_triggers	web2py.gluon.dal.PostgreSQLAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.PostgreSQLAdapter.rollback_prepared	web2py.gluon.dal.PostgreSQLAdapter-class.html#rollback_prepared
+web2py.gluon.dal.PostgreSQLAdapter.commit_prepared	web2py.gluon.dal.PostgreSQLAdapter-class.html#commit_prepared
+web2py.gluon.dal.BaseAdapter.EQ	web2py.gluon.dal.BaseAdapter-class.html#EQ
+web2py.gluon.dal.BaseAdapter.AND	web2py.gluon.dal.BaseAdapter-class.html#AND
+web2py.gluon.dal.BaseAdapter.uploads_in_blob	web2py.gluon.dal.BaseAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.BaseAdapter.NOT	web2py.gluon.dal.BaseAdapter-class.html#NOT
+web2py.gluon.dal.BaseAdapter.commit	web2py.gluon.dal.BaseAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.PostgreSQLAdapter.STARTSWITH	web2py.gluon.dal.PostgreSQLAdapter-class.html#STARTSWITH
+web2py.gluon.dal.BaseAdapter.SUB	web2py.gluon.dal.BaseAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.BaseAdapter._delete	web2py.gluon.dal.BaseAdapter-class.html#_delete
+web2py.gluon.dal.BaseAdapter.BELONGS	web2py.gluon.dal.BaseAdapter-class.html#BELONGS
+web2py.gluon.dal.BaseAdapter.MUL	web2py.gluon.dal.BaseAdapter-class.html#MUL
+web2py.gluon.dal.BaseAdapter.select	web2py.gluon.dal.BaseAdapter-class.html#select
+web2py.gluon.dal.BaseAdapter.PRIMARY_KEY	web2py.gluon.dal.BaseAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.PostgreSQLAdapter.prepare	web2py.gluon.dal.PostgreSQLAdapter-class.html#prepare
+web2py.gluon.dal.BaseAdapter.NE	web2py.gluon.dal.BaseAdapter-class.html#NE
+web2py.gluon.dal.BaseAdapter.SUBSTRING	web2py.gluon.dal.BaseAdapter-class.html#SUBSTRING
+web2py.gluon.dal.PostgreSQLAdapter.types	web2py.gluon.dal.PostgreSQLAdapter-class.html#types
+web2py.gluon.dal.BaseAdapter.EXTRACT	web2py.gluon.dal.BaseAdapter-class.html#EXTRACT
+web2py.gluon.dal.BaseAdapter.commit_on_alter_table	web2py.gluon.dal.BaseAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.BaseAdapter.represent_exceptions	web2py.gluon.dal.BaseAdapter-class.html#represent_exceptions
+web2py.gluon.dal.PostgreSQLAdapter.sequence_name	web2py.gluon.dal.PostgreSQLAdapter-class.html#sequence_name
+web2py.gluon.dal.BaseAdapter.ADD	web2py.gluon.dal.BaseAdapter-class.html#ADD
+web2py.gluon.dal.BaseAdapter.count	web2py.gluon.dal.BaseAdapter-class.html#count
+web2py.gluon.dal.BaseAdapter.UPPER	web2py.gluon.dal.BaseAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.PostgreSQLAdapter.LIKE	web2py.gluon.dal.PostgreSQLAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.BaseAdapter.file_exists	web2py.gluon.dal.BaseAdapter-class.html#file_exists
+web2py.gluon.dal.BaseAdapter.delete	web2py.gluon.dal.BaseAdapter-class.html#delete
+web2py.gluon.dal.BaseAdapter.LOWER	web2py.gluon.dal.BaseAdapter-class.html#LOWER
+web2py.gluon.dal.BaseAdapter._update	web2py.gluon.dal.BaseAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.PostgreSQLAdapter.ENDSWITH	web2py.gluon.dal.PostgreSQLAdapter-class.html#ENDSWITH
+web2py.gluon.dal.BaseAdapter.constraint_name	web2py.gluon.dal.BaseAdapter-class.html#constraint_name
+web2py.gluon.dal.BaseAdapter.DIV	web2py.gluon.dal.BaseAdapter-class.html#DIV
+web2py.gluon.dal.JDBCPostgreSQLAdapter.__init__	web2py.gluon.dal.JDBCPostgreSQLAdapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.BaseAdapter.LE	web2py.gluon.dal.BaseAdapter-class.html#LE
+web2py.gluon.dal.BaseAdapter.file_open	web2py.gluon.dal.BaseAdapter-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.BaseAdapter.LT	web2py.gluon.dal.BaseAdapter-class.html#LT
+web2py.gluon.dal.BaseAdapter.COMMA	web2py.gluon.dal.BaseAdapter-class.html#COMMA
+web2py.gluon.dal.BaseAdapter.create_table	web2py.gluon.dal.BaseAdapter-class.html#create_table
+web2py.gluon.dal.BaseAdapter.bulk_insert	web2py.gluon.dal.BaseAdapter-class.html#bulk_insert
+web2py.gluon.dal.BaseAdapter.AGGREGATE	web2py.gluon.dal.BaseAdapter-class.html#AGGREGATE
+web2py.gluon.dal.BaseAdapter.file_close	web2py.gluon.dal.BaseAdapter-class.html#file_close
+web2py.gluon.dal.PostgreSQLAdapter.RANDOM	web2py.gluon.dal.PostgreSQLAdapter-class.html#RANDOM
+web2py.gluon.dal.BaseAdapter.truncate	web2py.gluon.dal.BaseAdapter-class.html#truncate
+web2py.gluon.dal.PostgreSQLAdapter.driver	psycopg2-module.html
+web2py.gluon.dal.BaseAdapter.update	web2py.gluon.dal.BaseAdapter-class.html#update
+web2py.gluon.dal.BaseAdapter.AS	web2py.gluon.dal.BaseAdapter-class.html#AS
+web2py.gluon.dal.BaseAdapter.trigger_name	web2py.gluon.dal.BaseAdapter-class.html#trigger_name
+web2py.gluon.dal.BaseAdapter.expand	web2py.gluon.dal.BaseAdapter-class.html#expand
+web2py.gluon.dal.BaseAdapter._count	web2py.gluon.dal.BaseAdapter-class.html#_count
+web2py.gluon.dal.PostgreSQLAdapter.CONTAINS	web2py.gluon.dal.PostgreSQLAdapter-class.html#CONTAINS
+web2py.gluon.dal.BaseAdapter.INVERT	web2py.gluon.dal.BaseAdapter-class.html#INVERT
+web2py.gluon.dal.BaseAdapter.alias	web2py.gluon.dal.BaseAdapter-class.html#alias
+web2py.gluon.dal.PostgreSQLAdapter.lastrowid	web2py.gluon.dal.PostgreSQLAdapter-class.html#lastrowid
+web2py.gluon.dal.JDBCSQLiteAdapter	web2py.gluon.dal.JDBCSQLiteAdapter-class.html
+web2py.gluon.dal.BaseAdapter.represent	web2py.gluon.dal.BaseAdapter-class.html#represent
+web2py.gluon.dal.BaseAdapter.log_execute	web2py.gluon.dal.BaseAdapter-class.html#log_execute
+web2py.gluon.dal.BaseAdapter.select_limitby	web2py.gluon.dal.BaseAdapter-class.html#select_limitby
+web2py.gluon.dal.SQLiteAdapter._truncate	web2py.gluon.dal.SQLiteAdapter-class.html#_truncate
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.BaseAdapter.LEFT_JOIN	web2py.gluon.dal.BaseAdapter-class.html#LEFT_JOIN
+web2py.gluon.dal.BaseAdapter.distributed_transaction_begin	web2py.gluon.dal.BaseAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.BaseAdapter.GT	web2py.gluon.dal.BaseAdapter-class.html#GT
+web2py.gluon.dal.BaseAdapter.rollback	web2py.gluon.dal.BaseAdapter-class.html#rollback
+web2py.gluon.dal.BaseAdapter.ON	web2py.gluon.dal.BaseAdapter-class.html#ON
+web2py.gluon.dal.BaseAdapter.ALLOW_NULL	web2py.gluon.dal.BaseAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.BaseAdapter.maxcharlength	web2py.gluon.dal.BaseAdapter-class.html#maxcharlength
+web2py.gluon.dal.BaseAdapter.GE	web2py.gluon.dal.BaseAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.BaseAdapter._drop	web2py.gluon.dal.BaseAdapter-class.html#_drop
+web2py.gluon.dal.BaseAdapter.integrity_error_class	web2py.gluon.dal.BaseAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.BaseAdapter._select	web2py.gluon.dal.BaseAdapter-class.html#_select
+web2py.gluon.dal.BaseAdapter.insert	web2py.gluon.dal.BaseAdapter-class.html#insert
+web2py.gluon.dal.JDBCSQLiteAdapter.execute	web2py.gluon.dal.JDBCSQLiteAdapter-class.html#execute
+web2py.gluon.dal.BaseAdapter.drop	web2py.gluon.dal.BaseAdapter-class.html#drop
+web2py.gluon.dal.BaseAdapter.migrate_table	web2py.gluon.dal.BaseAdapter-class.html#migrate_table
+web2py.gluon.dal.BaseAdapter.concat_add	web2py.gluon.dal.BaseAdapter-class.html#concat_add
+web2py.gluon.dal.BaseAdapter._insert	web2py.gluon.dal.BaseAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.BaseAdapter.support_distributed_transaction	web2py.gluon.dal.BaseAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.BaseAdapter.OR	web2py.gluon.dal.BaseAdapter-class.html#OR
+web2py.gluon.dal.BaseAdapter.file_delete	web2py.gluon.dal.BaseAdapter-class.html#file_delete
+web2py.gluon.dal.BaseAdapter.NOT_NULL	web2py.gluon.dal.BaseAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.BaseAdapter.close	web2py.gluon.dal.BaseAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.BaseAdapter.rowslice	web2py.gluon.dal.BaseAdapter-class.html#rowslice
+web2py.gluon.dal.BaseAdapter.create_sequence_and_triggers	web2py.gluon.dal.BaseAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.BaseAdapter.rollback_prepared	web2py.gluon.dal.BaseAdapter-class.html#rollback_prepared
+web2py.gluon.dal.BaseAdapter.commit_prepared	web2py.gluon.dal.BaseAdapter-class.html#commit_prepared
+web2py.gluon.dal.SQLiteAdapter.web2py_extract	web2py.gluon.dal.SQLiteAdapter-class.html#web2py_extract
+web2py.gluon.dal.BaseAdapter.EQ	web2py.gluon.dal.BaseAdapter-class.html#EQ
+web2py.gluon.dal.BaseAdapter.AND	web2py.gluon.dal.BaseAdapter-class.html#AND
+web2py.gluon.dal.BaseAdapter.uploads_in_blob	web2py.gluon.dal.BaseAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.BaseAdapter.NOT	web2py.gluon.dal.BaseAdapter-class.html#NOT
+web2py.gluon.dal.BaseAdapter.commit	web2py.gluon.dal.BaseAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.BaseAdapter.STARTSWITH	web2py.gluon.dal.BaseAdapter-class.html#STARTSWITH
+web2py.gluon.dal.BaseAdapter.SUB	web2py.gluon.dal.BaseAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.BaseAdapter._delete	web2py.gluon.dal.BaseAdapter-class.html#_delete
+web2py.gluon.dal.BaseAdapter.BELONGS	web2py.gluon.dal.BaseAdapter-class.html#BELONGS
+web2py.gluon.dal.BaseAdapter.MUL	web2py.gluon.dal.BaseAdapter-class.html#MUL
+web2py.gluon.dal.BaseAdapter.select	web2py.gluon.dal.BaseAdapter-class.html#select
+web2py.gluon.dal.BaseAdapter.PRIMARY_KEY	web2py.gluon.dal.BaseAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.BaseAdapter.prepare	web2py.gluon.dal.BaseAdapter-class.html#prepare
+web2py.gluon.dal.BaseAdapter.NE	web2py.gluon.dal.BaseAdapter-class.html#NE
+web2py.gluon.dal.BaseAdapter.SUBSTRING	web2py.gluon.dal.BaseAdapter-class.html#SUBSTRING
+web2py.gluon.dal.BaseAdapter.types	web2py.gluon.dal.BaseAdapter-class.html#types
+web2py.gluon.dal.SQLiteAdapter.EXTRACT	web2py.gluon.dal.SQLiteAdapter-class.html#EXTRACT
+web2py.gluon.dal.BaseAdapter.commit_on_alter_table	web2py.gluon.dal.BaseAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.BaseAdapter.represent_exceptions	web2py.gluon.dal.BaseAdapter-class.html#represent_exceptions
+web2py.gluon.dal.BaseAdapter.sequence_name	web2py.gluon.dal.BaseAdapter-class.html#sequence_name
+web2py.gluon.dal.BaseAdapter.ADD	web2py.gluon.dal.BaseAdapter-class.html#ADD
+web2py.gluon.dal.BaseAdapter.count	web2py.gluon.dal.BaseAdapter-class.html#count
+web2py.gluon.dal.BaseAdapter.UPPER	web2py.gluon.dal.BaseAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.BaseAdapter.LIKE	web2py.gluon.dal.BaseAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.BaseAdapter.file_exists	web2py.gluon.dal.BaseAdapter-class.html#file_exists
+web2py.gluon.dal.BaseAdapter.delete	web2py.gluon.dal.BaseAdapter-class.html#delete
+web2py.gluon.dal.BaseAdapter.LOWER	web2py.gluon.dal.BaseAdapter-class.html#LOWER
+web2py.gluon.dal.BaseAdapter._update	web2py.gluon.dal.BaseAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.BaseAdapter.ENDSWITH	web2py.gluon.dal.BaseAdapter-class.html#ENDSWITH
+web2py.gluon.dal.BaseAdapter.constraint_name	web2py.gluon.dal.BaseAdapter-class.html#constraint_name
+web2py.gluon.dal.BaseAdapter.DIV	web2py.gluon.dal.BaseAdapter-class.html#DIV
+web2py.gluon.dal.JDBCSQLiteAdapter.__init__	web2py.gluon.dal.JDBCSQLiteAdapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.BaseAdapter.LE	web2py.gluon.dal.BaseAdapter-class.html#LE
+web2py.gluon.dal.BaseAdapter.file_open	web2py.gluon.dal.BaseAdapter-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.BaseAdapter.LT	web2py.gluon.dal.BaseAdapter-class.html#LT
+web2py.gluon.dal.BaseAdapter.COMMA	web2py.gluon.dal.BaseAdapter-class.html#COMMA
+web2py.gluon.dal.BaseAdapter.create_table	web2py.gluon.dal.BaseAdapter-class.html#create_table
+web2py.gluon.dal.BaseAdapter.bulk_insert	web2py.gluon.dal.BaseAdapter-class.html#bulk_insert
+web2py.gluon.dal.BaseAdapter.AGGREGATE	web2py.gluon.dal.BaseAdapter-class.html#AGGREGATE
+web2py.gluon.dal.BaseAdapter.file_close	web2py.gluon.dal.BaseAdapter-class.html#file_close
+web2py.gluon.dal.BaseAdapter.RANDOM	web2py.gluon.dal.BaseAdapter-class.html#RANDOM
+web2py.gluon.dal.BaseAdapter.truncate	web2py.gluon.dal.BaseAdapter-class.html#truncate
+web2py.gluon.dal.JDBCSQLiteAdapter.driver	web2py.gluon.dal.JDBCSQLiteAdapter-class.html#driver
+web2py.gluon.dal.BaseAdapter.update	web2py.gluon.dal.BaseAdapter-class.html#update
+web2py.gluon.dal.BaseAdapter.AS	web2py.gluon.dal.BaseAdapter-class.html#AS
+web2py.gluon.dal.BaseAdapter.trigger_name	web2py.gluon.dal.BaseAdapter-class.html#trigger_name
+web2py.gluon.dal.BaseAdapter.expand	web2py.gluon.dal.BaseAdapter-class.html#expand
+web2py.gluon.dal.BaseAdapter._count	web2py.gluon.dal.BaseAdapter-class.html#_count
+web2py.gluon.dal.BaseAdapter.CONTAINS	web2py.gluon.dal.BaseAdapter-class.html#CONTAINS
+web2py.gluon.dal.BaseAdapter.INVERT	web2py.gluon.dal.BaseAdapter-class.html#INVERT
+web2py.gluon.dal.BaseAdapter.alias	web2py.gluon.dal.BaseAdapter-class.html#alias
+web2py.gluon.dal.SQLiteAdapter.lastrowid	web2py.gluon.dal.SQLiteAdapter-class.html#lastrowid
+web2py.gluon.dal.MSSQL2Adapter	web2py.gluon.dal.MSSQL2Adapter-class.html
+web2py.gluon.dal.MSSQL2Adapter.represent	web2py.gluon.dal.MSSQL2Adapter-class.html#represent
+web2py.gluon.dal.BaseAdapter.log_execute	web2py.gluon.dal.BaseAdapter-class.html#log_execute
+web2py.gluon.dal.MSSQLAdapter.select_limitby	web2py.gluon.dal.MSSQLAdapter-class.html#select_limitby
+web2py.gluon.dal.BaseAdapter._truncate	web2py.gluon.dal.BaseAdapter-class.html#_truncate
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.MSSQLAdapter.LEFT_JOIN	web2py.gluon.dal.MSSQLAdapter-class.html#LEFT_JOIN
+web2py.gluon.dal.BaseAdapter.distributed_transaction_begin	web2py.gluon.dal.BaseAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.BaseAdapter.GT	web2py.gluon.dal.BaseAdapter-class.html#GT
+web2py.gluon.dal.BaseAdapter.rollback	web2py.gluon.dal.BaseAdapter-class.html#rollback
+web2py.gluon.dal.BaseAdapter.ON	web2py.gluon.dal.BaseAdapter-class.html#ON
+web2py.gluon.dal.MSSQLAdapter.RANDOM	web2py.gluon.dal.MSSQLAdapter-class.html#RANDOM
+web2py.gluon.dal.BaseAdapter.maxcharlength	web2py.gluon.dal.BaseAdapter-class.html#maxcharlength
+web2py.gluon.dal.BaseAdapter.GE	web2py.gluon.dal.BaseAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.BaseAdapter._drop	web2py.gluon.dal.BaseAdapter-class.html#_drop
+web2py.gluon.dal.MSSQLAdapter.integrity_error_class	web2py.gluon.dal.MSSQLAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.BaseAdapter._select	web2py.gluon.dal.BaseAdapter-class.html#_select
+web2py.gluon.dal.BaseAdapter.insert	web2py.gluon.dal.BaseAdapter-class.html#insert
+web2py.gluon.dal.MSSQL2Adapter.execute	web2py.gluon.dal.MSSQL2Adapter-class.html#execute
+web2py.gluon.dal.BaseAdapter.drop	web2py.gluon.dal.BaseAdapter-class.html#drop
+web2py.gluon.dal.BaseAdapter.migrate_table	web2py.gluon.dal.BaseAdapter-class.html#migrate_table
+web2py.gluon.dal.BaseAdapter.concat_add	web2py.gluon.dal.BaseAdapter-class.html#concat_add
+web2py.gluon.dal.BaseAdapter._insert	web2py.gluon.dal.BaseAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.BaseAdapter.support_distributed_transaction	web2py.gluon.dal.BaseAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.BaseAdapter.OR	web2py.gluon.dal.BaseAdapter-class.html#OR
+web2py.gluon.dal.BaseAdapter.file_delete	web2py.gluon.dal.BaseAdapter-class.html#file_delete
+web2py.gluon.dal.BaseAdapter.NOT_NULL	web2py.gluon.dal.BaseAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.BaseAdapter.close	web2py.gluon.dal.BaseAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.MSSQLAdapter.rowslice	web2py.gluon.dal.MSSQLAdapter-class.html#rowslice
+web2py.gluon.dal.BaseAdapter.create_sequence_and_triggers	web2py.gluon.dal.BaseAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.BaseAdapter.rollback_prepared	web2py.gluon.dal.BaseAdapter-class.html#rollback_prepared
+web2py.gluon.dal.BaseAdapter.commit_prepared	web2py.gluon.dal.BaseAdapter-class.html#commit_prepared
+web2py.gluon.dal.BaseAdapter.EQ	web2py.gluon.dal.BaseAdapter-class.html#EQ
+web2py.gluon.dal.BaseAdapter.AND	web2py.gluon.dal.BaseAdapter-class.html#AND
+web2py.gluon.dal.BaseAdapter.uploads_in_blob	web2py.gluon.dal.BaseAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.BaseAdapter.NOT	web2py.gluon.dal.BaseAdapter-class.html#NOT
+web2py.gluon.dal.BaseAdapter.commit	web2py.gluon.dal.BaseAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.BaseAdapter.STARTSWITH	web2py.gluon.dal.BaseAdapter-class.html#STARTSWITH
+web2py.gluon.dal.BaseAdapter.SUB	web2py.gluon.dal.BaseAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.BaseAdapter._delete	web2py.gluon.dal.BaseAdapter-class.html#_delete
+web2py.gluon.dal.BaseAdapter.BELONGS	web2py.gluon.dal.BaseAdapter-class.html#BELONGS
+web2py.gluon.dal.BaseAdapter.MUL	web2py.gluon.dal.BaseAdapter-class.html#MUL
+web2py.gluon.dal.BaseAdapter.select	web2py.gluon.dal.BaseAdapter-class.html#select
+web2py.gluon.dal.MSSQLAdapter.PRIMARY_KEY	web2py.gluon.dal.MSSQLAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.BaseAdapter.prepare	web2py.gluon.dal.BaseAdapter-class.html#prepare
+web2py.gluon.dal.BaseAdapter.NE	web2py.gluon.dal.BaseAdapter-class.html#NE
+web2py.gluon.dal.MSSQLAdapter.SUBSTRING	web2py.gluon.dal.MSSQLAdapter-class.html#SUBSTRING
+web2py.gluon.dal.MSSQL2Adapter.types	web2py.gluon.dal.MSSQL2Adapter-class.html#types
+web2py.gluon.dal.MSSQLAdapter.EXTRACT	web2py.gluon.dal.MSSQLAdapter-class.html#EXTRACT
+web2py.gluon.dal.BaseAdapter.commit_on_alter_table	web2py.gluon.dal.BaseAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.MSSQLAdapter.represent_exceptions	web2py.gluon.dal.MSSQLAdapter-class.html#represent_exceptions
+web2py.gluon.dal.BaseAdapter.sequence_name	web2py.gluon.dal.BaseAdapter-class.html#sequence_name
+web2py.gluon.dal.BaseAdapter.ADD	web2py.gluon.dal.BaseAdapter-class.html#ADD
+web2py.gluon.dal.BaseAdapter.count	web2py.gluon.dal.BaseAdapter-class.html#count
+web2py.gluon.dal.BaseAdapter.UPPER	web2py.gluon.dal.BaseAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.BaseAdapter.LIKE	web2py.gluon.dal.BaseAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.BaseAdapter.file_exists	web2py.gluon.dal.BaseAdapter-class.html#file_exists
+web2py.gluon.dal.BaseAdapter.delete	web2py.gluon.dal.BaseAdapter-class.html#delete
+web2py.gluon.dal.BaseAdapter.LOWER	web2py.gluon.dal.BaseAdapter-class.html#LOWER
+web2py.gluon.dal.BaseAdapter._update	web2py.gluon.dal.BaseAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.BaseAdapter.ENDSWITH	web2py.gluon.dal.BaseAdapter-class.html#ENDSWITH
+web2py.gluon.dal.BaseAdapter.constraint_name	web2py.gluon.dal.BaseAdapter-class.html#constraint_name
+web2py.gluon.dal.BaseAdapter.DIV	web2py.gluon.dal.BaseAdapter-class.html#DIV
+web2py.gluon.dal.MSSQLAdapter.__init__	web2py.gluon.dal.MSSQLAdapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.BaseAdapter.LE	web2py.gluon.dal.BaseAdapter-class.html#LE
+web2py.gluon.dal.BaseAdapter.file_open	web2py.gluon.dal.BaseAdapter-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.BaseAdapter.LT	web2py.gluon.dal.BaseAdapter-class.html#LT
+web2py.gluon.dal.BaseAdapter.COMMA	web2py.gluon.dal.BaseAdapter-class.html#COMMA
+web2py.gluon.dal.BaseAdapter.create_table	web2py.gluon.dal.BaseAdapter-class.html#create_table
+web2py.gluon.dal.BaseAdapter.bulk_insert	web2py.gluon.dal.BaseAdapter-class.html#bulk_insert
+web2py.gluon.dal.BaseAdapter.AGGREGATE	web2py.gluon.dal.BaseAdapter-class.html#AGGREGATE
+web2py.gluon.dal.BaseAdapter.file_close	web2py.gluon.dal.BaseAdapter-class.html#file_close
+web2py.gluon.dal.MSSQLAdapter.ALLOW_NULL	web2py.gluon.dal.MSSQLAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.BaseAdapter.truncate	web2py.gluon.dal.BaseAdapter-class.html#truncate
+web2py.gluon.dal.MSSQLAdapter.driver	web2py.gluon.dal.MSSQLAdapter-class.html#driver
+web2py.gluon.dal.BaseAdapter.update	web2py.gluon.dal.BaseAdapter-class.html#update
+web2py.gluon.dal.BaseAdapter.AS	web2py.gluon.dal.BaseAdapter-class.html#AS
+web2py.gluon.dal.BaseAdapter.trigger_name	web2py.gluon.dal.BaseAdapter-class.html#trigger_name
+web2py.gluon.dal.BaseAdapter.expand	web2py.gluon.dal.BaseAdapter-class.html#expand
+web2py.gluon.dal.BaseAdapter._count	web2py.gluon.dal.BaseAdapter-class.html#_count
+web2py.gluon.dal.BaseAdapter.CONTAINS	web2py.gluon.dal.BaseAdapter-class.html#CONTAINS
+web2py.gluon.dal.BaseAdapter.INVERT	web2py.gluon.dal.BaseAdapter-class.html#INVERT
+web2py.gluon.dal.BaseAdapter.alias	web2py.gluon.dal.BaseAdapter-class.html#alias
+web2py.gluon.dal.MSSQLAdapter.lastrowid	web2py.gluon.dal.MSSQLAdapter-class.html#lastrowid
+web2py.gluon.dal.MSSQLAdapter	web2py.gluon.dal.MSSQLAdapter-class.html
+web2py.gluon.dal.BaseAdapter.represent	web2py.gluon.dal.BaseAdapter-class.html#represent
+web2py.gluon.dal.BaseAdapter.log_execute	web2py.gluon.dal.BaseAdapter-class.html#log_execute
+web2py.gluon.dal.MSSQLAdapter.select_limitby	web2py.gluon.dal.MSSQLAdapter-class.html#select_limitby
+web2py.gluon.dal.BaseAdapter._truncate	web2py.gluon.dal.BaseAdapter-class.html#_truncate
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.MSSQLAdapter.LEFT_JOIN	web2py.gluon.dal.MSSQLAdapter-class.html#LEFT_JOIN
+web2py.gluon.dal.BaseAdapter.distributed_transaction_begin	web2py.gluon.dal.BaseAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.BaseAdapter.GT	web2py.gluon.dal.BaseAdapter-class.html#GT
+web2py.gluon.dal.BaseAdapter.rollback	web2py.gluon.dal.BaseAdapter-class.html#rollback
+web2py.gluon.dal.BaseAdapter.ON	web2py.gluon.dal.BaseAdapter-class.html#ON
+web2py.gluon.dal.MSSQLAdapter.RANDOM	web2py.gluon.dal.MSSQLAdapter-class.html#RANDOM
+web2py.gluon.dal.BaseAdapter.maxcharlength	web2py.gluon.dal.BaseAdapter-class.html#maxcharlength
+web2py.gluon.dal.BaseAdapter.GE	web2py.gluon.dal.BaseAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.BaseAdapter._drop	web2py.gluon.dal.BaseAdapter-class.html#_drop
+web2py.gluon.dal.MSSQLAdapter.integrity_error_class	web2py.gluon.dal.MSSQLAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.BaseAdapter._select	web2py.gluon.dal.BaseAdapter-class.html#_select
+web2py.gluon.dal.BaseAdapter.insert	web2py.gluon.dal.BaseAdapter-class.html#insert
+web2py.gluon.dal.BaseAdapter.execute	web2py.gluon.dal.BaseAdapter-class.html#execute
+web2py.gluon.dal.BaseAdapter.drop	web2py.gluon.dal.BaseAdapter-class.html#drop
+web2py.gluon.dal.BaseAdapter.migrate_table	web2py.gluon.dal.BaseAdapter-class.html#migrate_table
+web2py.gluon.dal.BaseAdapter.concat_add	web2py.gluon.dal.BaseAdapter-class.html#concat_add
+web2py.gluon.dal.BaseAdapter._insert	web2py.gluon.dal.BaseAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.BaseAdapter.support_distributed_transaction	web2py.gluon.dal.BaseAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.BaseAdapter.OR	web2py.gluon.dal.BaseAdapter-class.html#OR
+web2py.gluon.dal.BaseAdapter.file_delete	web2py.gluon.dal.BaseAdapter-class.html#file_delete
+web2py.gluon.dal.BaseAdapter.NOT_NULL	web2py.gluon.dal.BaseAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.BaseAdapter.close	web2py.gluon.dal.BaseAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.MSSQLAdapter.rowslice	web2py.gluon.dal.MSSQLAdapter-class.html#rowslice
+web2py.gluon.dal.BaseAdapter.create_sequence_and_triggers	web2py.gluon.dal.BaseAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.BaseAdapter.rollback_prepared	web2py.gluon.dal.BaseAdapter-class.html#rollback_prepared
+web2py.gluon.dal.BaseAdapter.commit_prepared	web2py.gluon.dal.BaseAdapter-class.html#commit_prepared
+web2py.gluon.dal.BaseAdapter.EQ	web2py.gluon.dal.BaseAdapter-class.html#EQ
+web2py.gluon.dal.BaseAdapter.AND	web2py.gluon.dal.BaseAdapter-class.html#AND
+web2py.gluon.dal.BaseAdapter.uploads_in_blob	web2py.gluon.dal.BaseAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.BaseAdapter.NOT	web2py.gluon.dal.BaseAdapter-class.html#NOT
+web2py.gluon.dal.BaseAdapter.commit	web2py.gluon.dal.BaseAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.BaseAdapter.STARTSWITH	web2py.gluon.dal.BaseAdapter-class.html#STARTSWITH
+web2py.gluon.dal.BaseAdapter.SUB	web2py.gluon.dal.BaseAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.BaseAdapter._delete	web2py.gluon.dal.BaseAdapter-class.html#_delete
+web2py.gluon.dal.BaseAdapter.BELONGS	web2py.gluon.dal.BaseAdapter-class.html#BELONGS
+web2py.gluon.dal.BaseAdapter.MUL	web2py.gluon.dal.BaseAdapter-class.html#MUL
+web2py.gluon.dal.BaseAdapter.select	web2py.gluon.dal.BaseAdapter-class.html#select
+web2py.gluon.dal.MSSQLAdapter.PRIMARY_KEY	web2py.gluon.dal.MSSQLAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.BaseAdapter.prepare	web2py.gluon.dal.BaseAdapter-class.html#prepare
+web2py.gluon.dal.BaseAdapter.NE	web2py.gluon.dal.BaseAdapter-class.html#NE
+web2py.gluon.dal.MSSQLAdapter.SUBSTRING	web2py.gluon.dal.MSSQLAdapter-class.html#SUBSTRING
+web2py.gluon.dal.MSSQLAdapter.types	web2py.gluon.dal.MSSQLAdapter-class.html#types
+web2py.gluon.dal.MSSQLAdapter.EXTRACT	web2py.gluon.dal.MSSQLAdapter-class.html#EXTRACT
+web2py.gluon.dal.BaseAdapter.commit_on_alter_table	web2py.gluon.dal.BaseAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.MSSQLAdapter.represent_exceptions	web2py.gluon.dal.MSSQLAdapter-class.html#represent_exceptions
+web2py.gluon.dal.BaseAdapter.sequence_name	web2py.gluon.dal.BaseAdapter-class.html#sequence_name
+web2py.gluon.dal.BaseAdapter.ADD	web2py.gluon.dal.BaseAdapter-class.html#ADD
+web2py.gluon.dal.BaseAdapter.count	web2py.gluon.dal.BaseAdapter-class.html#count
+web2py.gluon.dal.BaseAdapter.UPPER	web2py.gluon.dal.BaseAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.BaseAdapter.LIKE	web2py.gluon.dal.BaseAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.BaseAdapter.file_exists	web2py.gluon.dal.BaseAdapter-class.html#file_exists
+web2py.gluon.dal.BaseAdapter.delete	web2py.gluon.dal.BaseAdapter-class.html#delete
+web2py.gluon.dal.BaseAdapter.LOWER	web2py.gluon.dal.BaseAdapter-class.html#LOWER
+web2py.gluon.dal.BaseAdapter._update	web2py.gluon.dal.BaseAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.BaseAdapter.ENDSWITH	web2py.gluon.dal.BaseAdapter-class.html#ENDSWITH
+web2py.gluon.dal.BaseAdapter.constraint_name	web2py.gluon.dal.BaseAdapter-class.html#constraint_name
+web2py.gluon.dal.BaseAdapter.DIV	web2py.gluon.dal.BaseAdapter-class.html#DIV
+web2py.gluon.dal.MSSQLAdapter.__init__	web2py.gluon.dal.MSSQLAdapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.BaseAdapter.LE	web2py.gluon.dal.BaseAdapter-class.html#LE
+web2py.gluon.dal.BaseAdapter.file_open	web2py.gluon.dal.BaseAdapter-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.BaseAdapter.LT	web2py.gluon.dal.BaseAdapter-class.html#LT
+web2py.gluon.dal.BaseAdapter.COMMA	web2py.gluon.dal.BaseAdapter-class.html#COMMA
+web2py.gluon.dal.BaseAdapter.create_table	web2py.gluon.dal.BaseAdapter-class.html#create_table
+web2py.gluon.dal.BaseAdapter.bulk_insert	web2py.gluon.dal.BaseAdapter-class.html#bulk_insert
+web2py.gluon.dal.BaseAdapter.AGGREGATE	web2py.gluon.dal.BaseAdapter-class.html#AGGREGATE
+web2py.gluon.dal.BaseAdapter.file_close	web2py.gluon.dal.BaseAdapter-class.html#file_close
+web2py.gluon.dal.MSSQLAdapter.ALLOW_NULL	web2py.gluon.dal.MSSQLAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.BaseAdapter.truncate	web2py.gluon.dal.BaseAdapter-class.html#truncate
+web2py.gluon.dal.MSSQLAdapter.driver	web2py.gluon.dal.MSSQLAdapter-class.html#driver
+web2py.gluon.dal.BaseAdapter.update	web2py.gluon.dal.BaseAdapter-class.html#update
+web2py.gluon.dal.BaseAdapter.AS	web2py.gluon.dal.BaseAdapter-class.html#AS
+web2py.gluon.dal.BaseAdapter.trigger_name	web2py.gluon.dal.BaseAdapter-class.html#trigger_name
+web2py.gluon.dal.BaseAdapter.expand	web2py.gluon.dal.BaseAdapter-class.html#expand
+web2py.gluon.dal.BaseAdapter._count	web2py.gluon.dal.BaseAdapter-class.html#_count
+web2py.gluon.dal.BaseAdapter.CONTAINS	web2py.gluon.dal.BaseAdapter-class.html#CONTAINS
+web2py.gluon.dal.BaseAdapter.INVERT	web2py.gluon.dal.BaseAdapter-class.html#INVERT
+web2py.gluon.dal.BaseAdapter.alias	web2py.gluon.dal.BaseAdapter-class.html#alias
+web2py.gluon.dal.MSSQLAdapter.lastrowid	web2py.gluon.dal.MSSQLAdapter-class.html#lastrowid
+web2py.gluon.dal.MongoDBAdapter	web2py.gluon.dal.MongoDBAdapter-class.html
+web2py.gluon.dal.NoSQLAdapter.represent	web2py.gluon.dal.NoSQLAdapter-class.html#represent
+web2py.gluon.dal.NoSQLAdapter.log_execute	web2py.gluon.dal.NoSQLAdapter-class.html#log_execute
+web2py.gluon.dal.BaseAdapter.select_limitby	web2py.gluon.dal.BaseAdapter-class.html#select_limitby
+web2py.gluon.dal.BaseAdapter._truncate	web2py.gluon.dal.BaseAdapter-class.html#_truncate
+web2py.gluon.dal.NoSQLAdapter.SUB	web2py.gluon.dal.NoSQLAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.NoSQLAdapter.LEFT_JOIN	web2py.gluon.dal.NoSQLAdapter-class.html#LEFT_JOIN
+web2py.gluon.dal.NoSQLAdapter.distributed_transaction_begin	web2py.gluon.dal.NoSQLAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.BaseAdapter.GT	web2py.gluon.dal.BaseAdapter-class.html#GT
+web2py.gluon.dal.NoSQLAdapter.rollback	web2py.gluon.dal.NoSQLAdapter-class.html#rollback
+web2py.gluon.dal.NoSQLAdapter.ON	web2py.gluon.dal.NoSQLAdapter-class.html#ON
+web2py.gluon.dal.BaseAdapter.ALLOW_NULL	web2py.gluon.dal.BaseAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.BaseAdapter.maxcharlength	web2py.gluon.dal.BaseAdapter-class.html#maxcharlength
+web2py.gluon.dal.BaseAdapter.GE	web2py.gluon.dal.BaseAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.BaseAdapter._drop	web2py.gluon.dal.BaseAdapter-class.html#_drop
+web2py.gluon.dal.NoSQLAdapter.integrity_error_class	web2py.gluon.dal.NoSQLAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.NoSQLAdapter._select	web2py.gluon.dal.NoSQLAdapter-class.html#_select
+web2py.gluon.dal.MongoDBAdapter.insert	web2py.gluon.dal.MongoDBAdapter-class.html#insert
+web2py.gluon.dal.NoSQLAdapter.execute	web2py.gluon.dal.NoSQLAdapter-class.html#execute
+web2py.gluon.dal.NoSQLAdapter.drop	web2py.gluon.dal.NoSQLAdapter-class.html#drop
+web2py.gluon.dal.NoSQLAdapter.migrate_table	web2py.gluon.dal.NoSQLAdapter-class.html#migrate_table
+web2py.gluon.dal.NoSQLAdapter.concat_add	web2py.gluon.dal.NoSQLAdapter-class.html#concat_add
+web2py.gluon.dal.NoSQLAdapter._insert	web2py.gluon.dal.NoSQLAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.BaseAdapter.support_distributed_transaction	web2py.gluon.dal.BaseAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.NoSQLAdapter.OR	web2py.gluon.dal.NoSQLAdapter-class.html#OR
+web2py.gluon.dal.BaseAdapter.file_delete	web2py.gluon.dal.BaseAdapter-class.html#file_delete
+web2py.gluon.dal.BaseAdapter.NOT_NULL	web2py.gluon.dal.BaseAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.NoSQLAdapter.close	web2py.gluon.dal.NoSQLAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.NoSQLAdapter.rowslice	web2py.gluon.dal.NoSQLAdapter-class.html#rowslice
+web2py.gluon.dal.NoSQLAdapter.create_sequence_and_triggers	web2py.gluon.dal.NoSQLAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.NoSQLAdapter.rollback_prepared	web2py.gluon.dal.NoSQLAdapter-class.html#rollback_prepared
+web2py.gluon.dal.NoSQLAdapter.commit_prepared	web2py.gluon.dal.NoSQLAdapter-class.html#commit_prepared
+web2py.gluon.dal.BaseAdapter.EQ	web2py.gluon.dal.BaseAdapter-class.html#EQ
+web2py.gluon.dal.NoSQLAdapter.AND	web2py.gluon.dal.NoSQLAdapter-class.html#AND
+web2py.gluon.dal.MongoDBAdapter.uploads_in_blob	web2py.gluon.dal.MongoDBAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.BaseAdapter.NOT	web2py.gluon.dal.BaseAdapter-class.html#NOT
+web2py.gluon.dal.NoSQLAdapter.commit	web2py.gluon.dal.NoSQLAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.NoSQLAdapter.STARTSWITH	web2py.gluon.dal.NoSQLAdapter-class.html#STARTSWITH
+web2py.gluon.dal.NoSQLAdapter.to_unicode	web2py.gluon.dal.NoSQLAdapter-class.html#to_unicode
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.NoSQLAdapter._delete	web2py.gluon.dal.NoSQLAdapter-class.html#_delete
+web2py.gluon.dal.BaseAdapter.BELONGS	web2py.gluon.dal.BaseAdapter-class.html#BELONGS
+web2py.gluon.dal.NoSQLAdapter.MUL	web2py.gluon.dal.NoSQLAdapter-class.html#MUL
+web2py.gluon.dal.MongoDBAdapter.select	web2py.gluon.dal.MongoDBAdapter-class.html#select
+web2py.gluon.dal.NoSQLAdapter.PRIMARY_KEY	web2py.gluon.dal.NoSQLAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.NoSQLAdapter.prepare	web2py.gluon.dal.NoSQLAdapter-class.html#prepare
+web2py.gluon.dal.BaseAdapter.NE	web2py.gluon.dal.BaseAdapter-class.html#NE
+web2py.gluon.dal.NoSQLAdapter.SUBSTRING	web2py.gluon.dal.NoSQLAdapter-class.html#SUBSTRING
+web2py.gluon.dal.MongoDBAdapter.types	web2py.gluon.dal.MongoDBAdapter-class.html#types
+web2py.gluon.dal.NoSQLAdapter.EXTRACT	web2py.gluon.dal.NoSQLAdapter-class.html#EXTRACT
+web2py.gluon.dal.BaseAdapter.commit_on_alter_table	web2py.gluon.dal.BaseAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.NoSQLAdapter.represent_exceptions	web2py.gluon.dal.NoSQLAdapter-class.html#represent_exceptions
+web2py.gluon.dal.BaseAdapter.sequence_name	web2py.gluon.dal.BaseAdapter-class.html#sequence_name
+web2py.gluon.dal.NoSQLAdapter.ADD	web2py.gluon.dal.NoSQLAdapter-class.html#ADD
+web2py.gluon.dal.MongoDBAdapter.count	web2py.gluon.dal.MongoDBAdapter-class.html#count
+web2py.gluon.dal.NoSQLAdapter.UPPER	web2py.gluon.dal.NoSQLAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.NoSQLAdapter.LIKE	web2py.gluon.dal.NoSQLAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.BaseAdapter.file_exists	web2py.gluon.dal.BaseAdapter-class.html#file_exists
+web2py.gluon.dal.MongoDBAdapter.delete	web2py.gluon.dal.MongoDBAdapter-class.html#delete
+web2py.gluon.dal.NoSQLAdapter.LOWER	web2py.gluon.dal.NoSQLAdapter-class.html#LOWER
+web2py.gluon.dal.NoSQLAdapter._update	web2py.gluon.dal.NoSQLAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.NoSQLAdapter.ENDSWITH	web2py.gluon.dal.NoSQLAdapter-class.html#ENDSWITH
+web2py.gluon.dal.NoSQLAdapter.constraint_name	web2py.gluon.dal.NoSQLAdapter-class.html#constraint_name
+web2py.gluon.dal.NoSQLAdapter.DIV	web2py.gluon.dal.NoSQLAdapter-class.html#DIV
+web2py.gluon.dal.MongoDBAdapter.__init__	web2py.gluon.dal.MongoDBAdapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.BaseAdapter.LE	web2py.gluon.dal.BaseAdapter-class.html#LE
+web2py.gluon.dal.BaseAdapter.file_open	web2py.gluon.dal.BaseAdapter-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.BaseAdapter.LT	web2py.gluon.dal.BaseAdapter-class.html#LT
+web2py.gluon.dal.BaseAdapter.COMMA	web2py.gluon.dal.BaseAdapter-class.html#COMMA
+web2py.gluon.dal.BaseAdapter.create_table	web2py.gluon.dal.BaseAdapter-class.html#create_table
+web2py.gluon.dal.BaseAdapter.bulk_insert	web2py.gluon.dal.BaseAdapter-class.html#bulk_insert
+web2py.gluon.dal.NoSQLAdapter.AGGREGATE	web2py.gluon.dal.NoSQLAdapter-class.html#AGGREGATE
+web2py.gluon.dal.BaseAdapter.file_close	web2py.gluon.dal.BaseAdapter-class.html#file_close
+web2py.gluon.dal.NoSQLAdapter.RANDOM	web2py.gluon.dal.NoSQLAdapter-class.html#RANDOM
+web2py.gluon.dal.BaseAdapter.truncate	web2py.gluon.dal.BaseAdapter-class.html#truncate
+web2py.gluon.dal.BaseAdapter.driver	web2py.gluon.dal.BaseAdapter-class.html#driver
+web2py.gluon.dal.MongoDBAdapter.update	web2py.gluon.dal.MongoDBAdapter-class.html#update
+web2py.gluon.dal.NoSQLAdapter.AS	web2py.gluon.dal.NoSQLAdapter-class.html#AS
+web2py.gluon.dal.BaseAdapter.trigger_name	web2py.gluon.dal.BaseAdapter-class.html#trigger_name
+web2py.gluon.dal.BaseAdapter.expand	web2py.gluon.dal.BaseAdapter-class.html#expand
+web2py.gluon.dal.NoSQLAdapter._count	web2py.gluon.dal.NoSQLAdapter-class.html#_count
+web2py.gluon.dal.BaseAdapter.CONTAINS	web2py.gluon.dal.BaseAdapter-class.html#CONTAINS
+web2py.gluon.dal.BaseAdapter.INVERT	web2py.gluon.dal.BaseAdapter-class.html#INVERT
+web2py.gluon.dal.NoSQLAdapter.alias	web2py.gluon.dal.NoSQLAdapter-class.html#alias
+web2py.gluon.dal.NoSQLAdapter.lastrowid	web2py.gluon.dal.NoSQLAdapter-class.html#lastrowid
+web2py.gluon.dal.MySQLAdapter	web2py.gluon.dal.MySQLAdapter-class.html
+web2py.gluon.dal.BaseAdapter.represent	web2py.gluon.dal.BaseAdapter-class.html#represent
+web2py.gluon.dal.BaseAdapter.log_execute	web2py.gluon.dal.BaseAdapter-class.html#log_execute
+web2py.gluon.dal.BaseAdapter.select_limitby	web2py.gluon.dal.BaseAdapter-class.html#select_limitby
+web2py.gluon.dal.BaseAdapter._truncate	web2py.gluon.dal.BaseAdapter-class.html#_truncate
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.BaseAdapter.LEFT_JOIN	web2py.gluon.dal.BaseAdapter-class.html#LEFT_JOIN
+web2py.gluon.dal.MySQLAdapter.distributed_transaction_begin	web2py.gluon.dal.MySQLAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.BaseAdapter.GT	web2py.gluon.dal.BaseAdapter-class.html#GT
+web2py.gluon.dal.BaseAdapter.rollback	web2py.gluon.dal.BaseAdapter-class.html#rollback
+web2py.gluon.dal.BaseAdapter.ON	web2py.gluon.dal.BaseAdapter-class.html#ON
+web2py.gluon.dal.BaseAdapter.ALLOW_NULL	web2py.gluon.dal.BaseAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.MySQLAdapter.maxcharlength	web2py.gluon.dal.MySQLAdapter-class.html#maxcharlength
+web2py.gluon.dal.BaseAdapter.GE	web2py.gluon.dal.BaseAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.MySQLAdapter._drop	web2py.gluon.dal.MySQLAdapter-class.html#_drop
+web2py.gluon.dal.BaseAdapter.integrity_error_class	web2py.gluon.dal.BaseAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.BaseAdapter._select	web2py.gluon.dal.BaseAdapter-class.html#_select
+web2py.gluon.dal.BaseAdapter.insert	web2py.gluon.dal.BaseAdapter-class.html#insert
+web2py.gluon.dal.BaseAdapter.execute	web2py.gluon.dal.BaseAdapter-class.html#execute
+web2py.gluon.dal.BaseAdapter.drop	web2py.gluon.dal.BaseAdapter-class.html#drop
+web2py.gluon.dal.BaseAdapter.migrate_table	web2py.gluon.dal.BaseAdapter-class.html#migrate_table
+web2py.gluon.dal.MySQLAdapter.concat_add	web2py.gluon.dal.MySQLAdapter-class.html#concat_add
+web2py.gluon.dal.BaseAdapter._insert	web2py.gluon.dal.BaseAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.MySQLAdapter.support_distributed_transaction	web2py.gluon.dal.MySQLAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.BaseAdapter.OR	web2py.gluon.dal.BaseAdapter-class.html#OR
+web2py.gluon.dal.BaseAdapter.file_delete	web2py.gluon.dal.BaseAdapter-class.html#file_delete
+web2py.gluon.dal.BaseAdapter.NOT_NULL	web2py.gluon.dal.BaseAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.BaseAdapter.close	web2py.gluon.dal.BaseAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.BaseAdapter.rowslice	web2py.gluon.dal.BaseAdapter-class.html#rowslice
+web2py.gluon.dal.BaseAdapter.create_sequence_and_triggers	web2py.gluon.dal.BaseAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.MySQLAdapter.rollback_prepared	web2py.gluon.dal.MySQLAdapter-class.html#rollback_prepared
+web2py.gluon.dal.MySQLAdapter.commit_prepared	web2py.gluon.dal.MySQLAdapter-class.html#commit_prepared
+web2py.gluon.dal.BaseAdapter.EQ	web2py.gluon.dal.BaseAdapter-class.html#EQ
+web2py.gluon.dal.BaseAdapter.AND	web2py.gluon.dal.BaseAdapter-class.html#AND
+web2py.gluon.dal.BaseAdapter.uploads_in_blob	web2py.gluon.dal.BaseAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.BaseAdapter.NOT	web2py.gluon.dal.BaseAdapter-class.html#NOT
+web2py.gluon.dal.BaseAdapter.commit	web2py.gluon.dal.BaseAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.BaseAdapter.STARTSWITH	web2py.gluon.dal.BaseAdapter-class.html#STARTSWITH
+web2py.gluon.dal.BaseAdapter.SUB	web2py.gluon.dal.BaseAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.BaseAdapter._delete	web2py.gluon.dal.BaseAdapter-class.html#_delete
+web2py.gluon.dal.BaseAdapter.BELONGS	web2py.gluon.dal.BaseAdapter-class.html#BELONGS
+web2py.gluon.dal.BaseAdapter.MUL	web2py.gluon.dal.BaseAdapter-class.html#MUL
+web2py.gluon.dal.BaseAdapter.select	web2py.gluon.dal.BaseAdapter-class.html#select
+web2py.gluon.dal.BaseAdapter.PRIMARY_KEY	web2py.gluon.dal.BaseAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.MySQLAdapter.prepare	web2py.gluon.dal.MySQLAdapter-class.html#prepare
+web2py.gluon.dal.BaseAdapter.NE	web2py.gluon.dal.BaseAdapter-class.html#NE
+web2py.gluon.dal.MySQLAdapter.SUBSTRING	web2py.gluon.dal.MySQLAdapter-class.html#SUBSTRING
+web2py.gluon.dal.BaseAdapter.expand	web2py.gluon.dal.BaseAdapter-class.html#expand
+web2py.gluon.dal.BaseAdapter.EXTRACT	web2py.gluon.dal.BaseAdapter-class.html#EXTRACT
+web2py.gluon.dal.MySQLAdapter.commit_on_alter_table	web2py.gluon.dal.MySQLAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.BaseAdapter.represent_exceptions	web2py.gluon.dal.BaseAdapter-class.html#represent_exceptions
+web2py.gluon.dal.BaseAdapter.sequence_name	web2py.gluon.dal.BaseAdapter-class.html#sequence_name
+web2py.gluon.dal.BaseAdapter.ADD	web2py.gluon.dal.BaseAdapter-class.html#ADD
+web2py.gluon.dal.BaseAdapter.count	web2py.gluon.dal.BaseAdapter-class.html#count
+web2py.gluon.dal.BaseAdapter.UPPER	web2py.gluon.dal.BaseAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.BaseAdapter.LIKE	web2py.gluon.dal.BaseAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.BaseAdapter.file_exists	web2py.gluon.dal.BaseAdapter-class.html#file_exists
+web2py.gluon.dal.BaseAdapter.delete	web2py.gluon.dal.BaseAdapter-class.html#delete
+web2py.gluon.dal.BaseAdapter.LOWER	web2py.gluon.dal.BaseAdapter-class.html#LOWER
+web2py.gluon.dal.BaseAdapter._update	web2py.gluon.dal.BaseAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.BaseAdapter.ENDSWITH	web2py.gluon.dal.BaseAdapter-class.html#ENDSWITH
+web2py.gluon.dal.BaseAdapter.constraint_name	web2py.gluon.dal.BaseAdapter-class.html#constraint_name
+web2py.gluon.dal.BaseAdapter.DIV	web2py.gluon.dal.BaseAdapter-class.html#DIV
+web2py.gluon.dal.MySQLAdapter.__init__	web2py.gluon.dal.MySQLAdapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.BaseAdapter.LE	web2py.gluon.dal.BaseAdapter-class.html#LE
+web2py.gluon.dal.BaseAdapter.file_open	web2py.gluon.dal.BaseAdapter-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.BaseAdapter.LT	web2py.gluon.dal.BaseAdapter-class.html#LT
+web2py.gluon.dal.BaseAdapter.COMMA	web2py.gluon.dal.BaseAdapter-class.html#COMMA
+web2py.gluon.dal.BaseAdapter.create_table	web2py.gluon.dal.BaseAdapter-class.html#create_table
+web2py.gluon.dal.BaseAdapter.bulk_insert	web2py.gluon.dal.BaseAdapter-class.html#bulk_insert
+web2py.gluon.dal.BaseAdapter.AGGREGATE	web2py.gluon.dal.BaseAdapter-class.html#AGGREGATE
+web2py.gluon.dal.BaseAdapter.file_close	web2py.gluon.dal.BaseAdapter-class.html#file_close
+web2py.gluon.dal.MySQLAdapter.RANDOM	web2py.gluon.dal.MySQLAdapter-class.html#RANDOM
+web2py.gluon.dal.BaseAdapter.truncate	web2py.gluon.dal.BaseAdapter-class.html#truncate
+web2py.gluon.dal.MySQLAdapter.driver	web2py.gluon.contrib.pymysql-module.html
+web2py.gluon.dal.BaseAdapter.update	web2py.gluon.dal.BaseAdapter-class.html#update
+web2py.gluon.dal.BaseAdapter.AS	web2py.gluon.dal.BaseAdapter-class.html#AS
+web2py.gluon.dal.BaseAdapter.trigger_name	web2py.gluon.dal.BaseAdapter-class.html#trigger_name
+web2py.gluon.dal.MySQLAdapter.types	web2py.gluon.dal.MySQLAdapter-class.html#types
+web2py.gluon.dal.BaseAdapter._count	web2py.gluon.dal.BaseAdapter-class.html#_count
+web2py.gluon.dal.BaseAdapter.CONTAINS	web2py.gluon.dal.BaseAdapter-class.html#CONTAINS
+web2py.gluon.dal.BaseAdapter.INVERT	web2py.gluon.dal.BaseAdapter-class.html#INVERT
+web2py.gluon.dal.BaseAdapter.alias	web2py.gluon.dal.BaseAdapter-class.html#alias
+web2py.gluon.dal.MySQLAdapter.lastrowid	web2py.gluon.dal.MySQLAdapter-class.html#lastrowid
+web2py.gluon.dal.NoSQLAdapter	web2py.gluon.dal.NoSQLAdapter-class.html
+web2py.gluon.dal.NoSQLAdapter.represent	web2py.gluon.dal.NoSQLAdapter-class.html#represent
+web2py.gluon.dal.NoSQLAdapter.log_execute	web2py.gluon.dal.NoSQLAdapter-class.html#log_execute
+web2py.gluon.dal.BaseAdapter.select_limitby	web2py.gluon.dal.BaseAdapter-class.html#select_limitby
+web2py.gluon.dal.BaseAdapter._truncate	web2py.gluon.dal.BaseAdapter-class.html#_truncate
+web2py.gluon.dal.NoSQLAdapter.SUB	web2py.gluon.dal.NoSQLAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.NoSQLAdapter.LEFT_JOIN	web2py.gluon.dal.NoSQLAdapter-class.html#LEFT_JOIN
+web2py.gluon.dal.NoSQLAdapter.distributed_transaction_begin	web2py.gluon.dal.NoSQLAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.BaseAdapter.GT	web2py.gluon.dal.BaseAdapter-class.html#GT
+web2py.gluon.dal.NoSQLAdapter.rollback	web2py.gluon.dal.NoSQLAdapter-class.html#rollback
+web2py.gluon.dal.NoSQLAdapter.ON	web2py.gluon.dal.NoSQLAdapter-class.html#ON
+web2py.gluon.dal.BaseAdapter.ALLOW_NULL	web2py.gluon.dal.BaseAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.BaseAdapter.maxcharlength	web2py.gluon.dal.BaseAdapter-class.html#maxcharlength
+web2py.gluon.dal.BaseAdapter.GE	web2py.gluon.dal.BaseAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.BaseAdapter._drop	web2py.gluon.dal.BaseAdapter-class.html#_drop
+web2py.gluon.dal.NoSQLAdapter.integrity_error_class	web2py.gluon.dal.NoSQLAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.NoSQLAdapter._select	web2py.gluon.dal.NoSQLAdapter-class.html#_select
+web2py.gluon.dal.BaseAdapter.insert	web2py.gluon.dal.BaseAdapter-class.html#insert
+web2py.gluon.dal.NoSQLAdapter.execute	web2py.gluon.dal.NoSQLAdapter-class.html#execute
+web2py.gluon.dal.NoSQLAdapter.drop	web2py.gluon.dal.NoSQLAdapter-class.html#drop
+web2py.gluon.dal.NoSQLAdapter.migrate_table	web2py.gluon.dal.NoSQLAdapter-class.html#migrate_table
+web2py.gluon.dal.NoSQLAdapter.concat_add	web2py.gluon.dal.NoSQLAdapter-class.html#concat_add
+web2py.gluon.dal.NoSQLAdapter._insert	web2py.gluon.dal.NoSQLAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.BaseAdapter.support_distributed_transaction	web2py.gluon.dal.BaseAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.NoSQLAdapter.OR	web2py.gluon.dal.NoSQLAdapter-class.html#OR
+web2py.gluon.dal.BaseAdapter.file_delete	web2py.gluon.dal.BaseAdapter-class.html#file_delete
+web2py.gluon.dal.BaseAdapter.NOT_NULL	web2py.gluon.dal.BaseAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.NoSQLAdapter.close	web2py.gluon.dal.NoSQLAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.NoSQLAdapter.rowslice	web2py.gluon.dal.NoSQLAdapter-class.html#rowslice
+web2py.gluon.dal.NoSQLAdapter.create_sequence_and_triggers	web2py.gluon.dal.NoSQLAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.NoSQLAdapter.rollback_prepared	web2py.gluon.dal.NoSQLAdapter-class.html#rollback_prepared
+web2py.gluon.dal.NoSQLAdapter.commit_prepared	web2py.gluon.dal.NoSQLAdapter-class.html#commit_prepared
+web2py.gluon.dal.BaseAdapter.EQ	web2py.gluon.dal.BaseAdapter-class.html#EQ
+web2py.gluon.dal.NoSQLAdapter.AND	web2py.gluon.dal.NoSQLAdapter-class.html#AND
+web2py.gluon.dal.BaseAdapter.uploads_in_blob	web2py.gluon.dal.BaseAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.BaseAdapter.NOT	web2py.gluon.dal.BaseAdapter-class.html#NOT
+web2py.gluon.dal.NoSQLAdapter.commit	web2py.gluon.dal.NoSQLAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.NoSQLAdapter.STARTSWITH	web2py.gluon.dal.NoSQLAdapter-class.html#STARTSWITH
+web2py.gluon.dal.NoSQLAdapter.to_unicode	web2py.gluon.dal.NoSQLAdapter-class.html#to_unicode
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.NoSQLAdapter._delete	web2py.gluon.dal.NoSQLAdapter-class.html#_delete
+web2py.gluon.dal.BaseAdapter.BELONGS	web2py.gluon.dal.BaseAdapter-class.html#BELONGS
+web2py.gluon.dal.NoSQLAdapter.MUL	web2py.gluon.dal.NoSQLAdapter-class.html#MUL
+web2py.gluon.dal.BaseAdapter.select	web2py.gluon.dal.BaseAdapter-class.html#select
+web2py.gluon.dal.NoSQLAdapter.PRIMARY_KEY	web2py.gluon.dal.NoSQLAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.NoSQLAdapter.prepare	web2py.gluon.dal.NoSQLAdapter-class.html#prepare
+web2py.gluon.dal.BaseAdapter.NE	web2py.gluon.dal.BaseAdapter-class.html#NE
+web2py.gluon.dal.NoSQLAdapter.SUBSTRING	web2py.gluon.dal.NoSQLAdapter-class.html#SUBSTRING
+web2py.gluon.dal.BaseAdapter.types	web2py.gluon.dal.BaseAdapter-class.html#types
+web2py.gluon.dal.NoSQLAdapter.EXTRACT	web2py.gluon.dal.NoSQLAdapter-class.html#EXTRACT
+web2py.gluon.dal.BaseAdapter.commit_on_alter_table	web2py.gluon.dal.BaseAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.NoSQLAdapter.represent_exceptions	web2py.gluon.dal.NoSQLAdapter-class.html#represent_exceptions
+web2py.gluon.dal.BaseAdapter.sequence_name	web2py.gluon.dal.BaseAdapter-class.html#sequence_name
+web2py.gluon.dal.NoSQLAdapter.ADD	web2py.gluon.dal.NoSQLAdapter-class.html#ADD
+web2py.gluon.dal.BaseAdapter.count	web2py.gluon.dal.BaseAdapter-class.html#count
+web2py.gluon.dal.NoSQLAdapter.UPPER	web2py.gluon.dal.NoSQLAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.NoSQLAdapter.LIKE	web2py.gluon.dal.NoSQLAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.BaseAdapter.file_exists	web2py.gluon.dal.BaseAdapter-class.html#file_exists
+web2py.gluon.dal.BaseAdapter.delete	web2py.gluon.dal.BaseAdapter-class.html#delete
+web2py.gluon.dal.NoSQLAdapter.LOWER	web2py.gluon.dal.NoSQLAdapter-class.html#LOWER
+web2py.gluon.dal.NoSQLAdapter._update	web2py.gluon.dal.NoSQLAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.NoSQLAdapter.ENDSWITH	web2py.gluon.dal.NoSQLAdapter-class.html#ENDSWITH
+web2py.gluon.dal.NoSQLAdapter.constraint_name	web2py.gluon.dal.NoSQLAdapter-class.html#constraint_name
+web2py.gluon.dal.NoSQLAdapter.DIV	web2py.gluon.dal.NoSQLAdapter-class.html#DIV
+web2py.gluon.dal.BaseAdapter.__init__	web2py.gluon.dal.BaseAdapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.BaseAdapter.LE	web2py.gluon.dal.BaseAdapter-class.html#LE
+web2py.gluon.dal.BaseAdapter.file_open	web2py.gluon.dal.BaseAdapter-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.BaseAdapter.LT	web2py.gluon.dal.BaseAdapter-class.html#LT
+web2py.gluon.dal.BaseAdapter.COMMA	web2py.gluon.dal.BaseAdapter-class.html#COMMA
+web2py.gluon.dal.BaseAdapter.create_table	web2py.gluon.dal.BaseAdapter-class.html#create_table
+web2py.gluon.dal.BaseAdapter.bulk_insert	web2py.gluon.dal.BaseAdapter-class.html#bulk_insert
+web2py.gluon.dal.NoSQLAdapter.AGGREGATE	web2py.gluon.dal.NoSQLAdapter-class.html#AGGREGATE
+web2py.gluon.dal.BaseAdapter.file_close	web2py.gluon.dal.BaseAdapter-class.html#file_close
+web2py.gluon.dal.NoSQLAdapter.RANDOM	web2py.gluon.dal.NoSQLAdapter-class.html#RANDOM
+web2py.gluon.dal.BaseAdapter.truncate	web2py.gluon.dal.BaseAdapter-class.html#truncate
+web2py.gluon.dal.BaseAdapter.driver	web2py.gluon.dal.BaseAdapter-class.html#driver
+web2py.gluon.dal.BaseAdapter.update	web2py.gluon.dal.BaseAdapter-class.html#update
+web2py.gluon.dal.NoSQLAdapter.AS	web2py.gluon.dal.NoSQLAdapter-class.html#AS
+web2py.gluon.dal.BaseAdapter.trigger_name	web2py.gluon.dal.BaseAdapter-class.html#trigger_name
+web2py.gluon.dal.BaseAdapter.expand	web2py.gluon.dal.BaseAdapter-class.html#expand
+web2py.gluon.dal.NoSQLAdapter._count	web2py.gluon.dal.NoSQLAdapter-class.html#_count
+web2py.gluon.dal.BaseAdapter.CONTAINS	web2py.gluon.dal.BaseAdapter-class.html#CONTAINS
+web2py.gluon.dal.BaseAdapter.INVERT	web2py.gluon.dal.BaseAdapter-class.html#INVERT
+web2py.gluon.dal.NoSQLAdapter.alias	web2py.gluon.dal.NoSQLAdapter-class.html#alias
+web2py.gluon.dal.NoSQLAdapter.lastrowid	web2py.gluon.dal.NoSQLAdapter-class.html#lastrowid
+web2py.gluon.dal.OracleAdapter	web2py.gluon.dal.OracleAdapter-class.html
+web2py.gluon.dal.BaseAdapter.represent	web2py.gluon.dal.BaseAdapter-class.html#represent
+web2py.gluon.dal.BaseAdapter.log_execute	web2py.gluon.dal.BaseAdapter-class.html#log_execute
+web2py.gluon.dal.OracleAdapter.select_limitby	web2py.gluon.dal.OracleAdapter-class.html#select_limitby
+web2py.gluon.dal.BaseAdapter._truncate	web2py.gluon.dal.BaseAdapter-class.html#_truncate
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.OracleAdapter.LEFT_JOIN	web2py.gluon.dal.OracleAdapter-class.html#LEFT_JOIN
+web2py.gluon.dal.BaseAdapter.distributed_transaction_begin	web2py.gluon.dal.BaseAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.BaseAdapter.GT	web2py.gluon.dal.BaseAdapter-class.html#GT
+web2py.gluon.dal.BaseAdapter.rollback	web2py.gluon.dal.BaseAdapter-class.html#rollback
+web2py.gluon.dal.BaseAdapter.ON	web2py.gluon.dal.BaseAdapter-class.html#ON
+web2py.gluon.dal.BaseAdapter.ALLOW_NULL	web2py.gluon.dal.BaseAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.BaseAdapter.maxcharlength	web2py.gluon.dal.BaseAdapter-class.html#maxcharlength
+web2py.gluon.dal.BaseAdapter.GE	web2py.gluon.dal.BaseAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.OracleAdapter._drop	web2py.gluon.dal.OracleAdapter-class.html#_drop
+web2py.gluon.dal.BaseAdapter.integrity_error_class	web2py.gluon.dal.BaseAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.BaseAdapter._select	web2py.gluon.dal.BaseAdapter-class.html#_select
+web2py.gluon.dal.BaseAdapter.insert	web2py.gluon.dal.BaseAdapter-class.html#insert
+web2py.gluon.dal.OracleAdapter.execute	web2py.gluon.dal.OracleAdapter-class.html#execute
+web2py.gluon.dal.BaseAdapter.drop	web2py.gluon.dal.BaseAdapter-class.html#drop
+web2py.gluon.dal.BaseAdapter.migrate_table	web2py.gluon.dal.BaseAdapter-class.html#migrate_table
+web2py.gluon.dal.BaseAdapter.concat_add	web2py.gluon.dal.BaseAdapter-class.html#concat_add
+web2py.gluon.dal.BaseAdapter._insert	web2py.gluon.dal.BaseAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.BaseAdapter.support_distributed_transaction	web2py.gluon.dal.BaseAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.BaseAdapter.OR	web2py.gluon.dal.BaseAdapter-class.html#OR
+web2py.gluon.dal.BaseAdapter.file_delete	web2py.gluon.dal.BaseAdapter-class.html#file_delete
+web2py.gluon.dal.OracleAdapter.NOT_NULL	web2py.gluon.dal.OracleAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.BaseAdapter.close	web2py.gluon.dal.BaseAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.BaseAdapter.rowslice	web2py.gluon.dal.BaseAdapter-class.html#rowslice
+web2py.gluon.dal.OracleAdapter.create_sequence_and_triggers	web2py.gluon.dal.OracleAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.BaseAdapter.rollback_prepared	web2py.gluon.dal.BaseAdapter-class.html#rollback_prepared
+web2py.gluon.dal.BaseAdapter.commit_prepared	web2py.gluon.dal.BaseAdapter-class.html#commit_prepared
+web2py.gluon.dal.BaseAdapter.EQ	web2py.gluon.dal.BaseAdapter-class.html#EQ
+web2py.gluon.dal.BaseAdapter.AND	web2py.gluon.dal.BaseAdapter-class.html#AND
+web2py.gluon.dal.BaseAdapter.uploads_in_blob	web2py.gluon.dal.BaseAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.BaseAdapter.NOT	web2py.gluon.dal.BaseAdapter-class.html#NOT
+web2py.gluon.dal.BaseAdapter.commit	web2py.gluon.dal.BaseAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.BaseAdapter.STARTSWITH	web2py.gluon.dal.BaseAdapter-class.html#STARTSWITH
+web2py.gluon.dal.BaseAdapter.SUB	web2py.gluon.dal.BaseAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.BaseAdapter._delete	web2py.gluon.dal.BaseAdapter-class.html#_delete
+web2py.gluon.dal.BaseAdapter.BELONGS	web2py.gluon.dal.BaseAdapter-class.html#BELONGS
+web2py.gluon.dal.BaseAdapter.MUL	web2py.gluon.dal.BaseAdapter-class.html#MUL
+web2py.gluon.dal.BaseAdapter.select	web2py.gluon.dal.BaseAdapter-class.html#select
+web2py.gluon.dal.OracleAdapter.oracle_fix	web2py.gluon.dal.OracleAdapter-class.html#oracle_fix
+web2py.gluon.dal.BaseAdapter.PRIMARY_KEY	web2py.gluon.dal.BaseAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.BaseAdapter.prepare	web2py.gluon.dal.BaseAdapter-class.html#prepare
+web2py.gluon.dal.BaseAdapter.NE	web2py.gluon.dal.BaseAdapter-class.html#NE
+web2py.gluon.dal.BaseAdapter.SUBSTRING	web2py.gluon.dal.BaseAdapter-class.html#SUBSTRING
+web2py.gluon.dal.BaseAdapter.expand	web2py.gluon.dal.BaseAdapter-class.html#expand
+web2py.gluon.dal.BaseAdapter.EXTRACT	web2py.gluon.dal.BaseAdapter-class.html#EXTRACT
+web2py.gluon.dal.OracleAdapter.commit_on_alter_table	web2py.gluon.dal.OracleAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.OracleAdapter.represent_exceptions	web2py.gluon.dal.OracleAdapter-class.html#represent_exceptions
+web2py.gluon.dal.OracleAdapter.sequence_name	web2py.gluon.dal.OracleAdapter-class.html#sequence_name
+web2py.gluon.dal.BaseAdapter.ADD	web2py.gluon.dal.BaseAdapter-class.html#ADD
+web2py.gluon.dal.BaseAdapter.count	web2py.gluon.dal.BaseAdapter-class.html#count
+web2py.gluon.dal.BaseAdapter.UPPER	web2py.gluon.dal.BaseAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.BaseAdapter.LIKE	web2py.gluon.dal.BaseAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.BaseAdapter.file_exists	web2py.gluon.dal.BaseAdapter-class.html#file_exists
+web2py.gluon.dal.BaseAdapter.delete	web2py.gluon.dal.BaseAdapter-class.html#delete
+web2py.gluon.dal.BaseAdapter.LOWER	web2py.gluon.dal.BaseAdapter-class.html#LOWER
+web2py.gluon.dal.BaseAdapter._update	web2py.gluon.dal.BaseAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.BaseAdapter.ENDSWITH	web2py.gluon.dal.BaseAdapter-class.html#ENDSWITH
+web2py.gluon.dal.OracleAdapter.constraint_name	web2py.gluon.dal.OracleAdapter-class.html#constraint_name
+web2py.gluon.dal.BaseAdapter.DIV	web2py.gluon.dal.BaseAdapter-class.html#DIV
+web2py.gluon.dal.OracleAdapter.__init__	web2py.gluon.dal.OracleAdapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.BaseAdapter.LE	web2py.gluon.dal.BaseAdapter-class.html#LE
+web2py.gluon.dal.BaseAdapter.file_open	web2py.gluon.dal.BaseAdapter-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.BaseAdapter.LT	web2py.gluon.dal.BaseAdapter-class.html#LT
+web2py.gluon.dal.BaseAdapter.COMMA	web2py.gluon.dal.BaseAdapter-class.html#COMMA
+web2py.gluon.dal.BaseAdapter.create_table	web2py.gluon.dal.BaseAdapter-class.html#create_table
+web2py.gluon.dal.BaseAdapter.bulk_insert	web2py.gluon.dal.BaseAdapter-class.html#bulk_insert
+web2py.gluon.dal.BaseAdapter.AGGREGATE	web2py.gluon.dal.BaseAdapter-class.html#AGGREGATE
+web2py.gluon.dal.BaseAdapter.file_close	web2py.gluon.dal.BaseAdapter-class.html#file_close
+web2py.gluon.dal.OracleAdapter.RANDOM	web2py.gluon.dal.OracleAdapter-class.html#RANDOM
+web2py.gluon.dal.BaseAdapter.truncate	web2py.gluon.dal.BaseAdapter-class.html#truncate
+web2py.gluon.dal.OracleAdapter.driver	web2py.gluon.dal.OracleAdapter-class.html#driver
+web2py.gluon.dal.BaseAdapter.update	web2py.gluon.dal.BaseAdapter-class.html#update
+web2py.gluon.dal.BaseAdapter.AS	web2py.gluon.dal.BaseAdapter-class.html#AS
+web2py.gluon.dal.OracleAdapter.trigger_name	web2py.gluon.dal.OracleAdapter-class.html#trigger_name
+web2py.gluon.dal.OracleAdapter.types	web2py.gluon.dal.OracleAdapter-class.html#types
+web2py.gluon.dal.BaseAdapter._count	web2py.gluon.dal.BaseAdapter-class.html#_count
+web2py.gluon.dal.BaseAdapter.CONTAINS	web2py.gluon.dal.BaseAdapter-class.html#CONTAINS
+web2py.gluon.dal.BaseAdapter.INVERT	web2py.gluon.dal.BaseAdapter-class.html#INVERT
+web2py.gluon.dal.BaseAdapter.alias	web2py.gluon.dal.BaseAdapter-class.html#alias
+web2py.gluon.dal.OracleAdapter.lastrowid	web2py.gluon.dal.OracleAdapter-class.html#lastrowid
+web2py.gluon.dal.PostgreSQLAdapter	web2py.gluon.dal.PostgreSQLAdapter-class.html
+web2py.gluon.dal.BaseAdapter.represent	web2py.gluon.dal.BaseAdapter-class.html#represent
+web2py.gluon.dal.BaseAdapter.log_execute	web2py.gluon.dal.BaseAdapter-class.html#log_execute
+web2py.gluon.dal.BaseAdapter.select_limitby	web2py.gluon.dal.BaseAdapter-class.html#select_limitby
+web2py.gluon.dal.BaseAdapter._truncate	web2py.gluon.dal.BaseAdapter-class.html#_truncate
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.BaseAdapter.LEFT_JOIN	web2py.gluon.dal.BaseAdapter-class.html#LEFT_JOIN
+web2py.gluon.dal.PostgreSQLAdapter.distributed_transaction_begin	web2py.gluon.dal.PostgreSQLAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.BaseAdapter.GT	web2py.gluon.dal.BaseAdapter-class.html#GT
+web2py.gluon.dal.BaseAdapter.rollback	web2py.gluon.dal.BaseAdapter-class.html#rollback
+web2py.gluon.dal.BaseAdapter.ON	web2py.gluon.dal.BaseAdapter-class.html#ON
+web2py.gluon.dal.BaseAdapter.ALLOW_NULL	web2py.gluon.dal.BaseAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.BaseAdapter.maxcharlength	web2py.gluon.dal.BaseAdapter-class.html#maxcharlength
+web2py.gluon.dal.BaseAdapter.GE	web2py.gluon.dal.BaseAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.BaseAdapter._drop	web2py.gluon.dal.BaseAdapter-class.html#_drop
+web2py.gluon.dal.BaseAdapter.integrity_error_class	web2py.gluon.dal.BaseAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.BaseAdapter._select	web2py.gluon.dal.BaseAdapter-class.html#_select
+web2py.gluon.dal.BaseAdapter.insert	web2py.gluon.dal.BaseAdapter-class.html#insert
+web2py.gluon.dal.BaseAdapter.execute	web2py.gluon.dal.BaseAdapter-class.html#execute
+web2py.gluon.dal.BaseAdapter.drop	web2py.gluon.dal.BaseAdapter-class.html#drop
+web2py.gluon.dal.BaseAdapter.migrate_table	web2py.gluon.dal.BaseAdapter-class.html#migrate_table
+web2py.gluon.dal.BaseAdapter.concat_add	web2py.gluon.dal.BaseAdapter-class.html#concat_add
+web2py.gluon.dal.BaseAdapter._insert	web2py.gluon.dal.BaseAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.PostgreSQLAdapter.support_distributed_transaction	web2py.gluon.dal.PostgreSQLAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.BaseAdapter.OR	web2py.gluon.dal.BaseAdapter-class.html#OR
+web2py.gluon.dal.BaseAdapter.file_delete	web2py.gluon.dal.BaseAdapter-class.html#file_delete
+web2py.gluon.dal.BaseAdapter.NOT_NULL	web2py.gluon.dal.BaseAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.BaseAdapter.close	web2py.gluon.dal.BaseAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.BaseAdapter.rowslice	web2py.gluon.dal.BaseAdapter-class.html#rowslice
+web2py.gluon.dal.PostgreSQLAdapter.create_sequence_and_triggers	web2py.gluon.dal.PostgreSQLAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.PostgreSQLAdapter.rollback_prepared	web2py.gluon.dal.PostgreSQLAdapter-class.html#rollback_prepared
+web2py.gluon.dal.PostgreSQLAdapter.commit_prepared	web2py.gluon.dal.PostgreSQLAdapter-class.html#commit_prepared
+web2py.gluon.dal.BaseAdapter.EQ	web2py.gluon.dal.BaseAdapter-class.html#EQ
+web2py.gluon.dal.BaseAdapter.AND	web2py.gluon.dal.BaseAdapter-class.html#AND
+web2py.gluon.dal.BaseAdapter.uploads_in_blob	web2py.gluon.dal.BaseAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.BaseAdapter.NOT	web2py.gluon.dal.BaseAdapter-class.html#NOT
+web2py.gluon.dal.BaseAdapter.commit	web2py.gluon.dal.BaseAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.PostgreSQLAdapter.STARTSWITH	web2py.gluon.dal.PostgreSQLAdapter-class.html#STARTSWITH
+web2py.gluon.dal.BaseAdapter.SUB	web2py.gluon.dal.BaseAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.BaseAdapter._delete	web2py.gluon.dal.BaseAdapter-class.html#_delete
+web2py.gluon.dal.BaseAdapter.BELONGS	web2py.gluon.dal.BaseAdapter-class.html#BELONGS
+web2py.gluon.dal.BaseAdapter.MUL	web2py.gluon.dal.BaseAdapter-class.html#MUL
+web2py.gluon.dal.BaseAdapter.select	web2py.gluon.dal.BaseAdapter-class.html#select
+web2py.gluon.dal.BaseAdapter.PRIMARY_KEY	web2py.gluon.dal.BaseAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.PostgreSQLAdapter.prepare	web2py.gluon.dal.PostgreSQLAdapter-class.html#prepare
+web2py.gluon.dal.BaseAdapter.NE	web2py.gluon.dal.BaseAdapter-class.html#NE
+web2py.gluon.dal.BaseAdapter.SUBSTRING	web2py.gluon.dal.BaseAdapter-class.html#SUBSTRING
+web2py.gluon.dal.PostgreSQLAdapter.types	web2py.gluon.dal.PostgreSQLAdapter-class.html#types
+web2py.gluon.dal.BaseAdapter.EXTRACT	web2py.gluon.dal.BaseAdapter-class.html#EXTRACT
+web2py.gluon.dal.BaseAdapter.commit_on_alter_table	web2py.gluon.dal.BaseAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.BaseAdapter.represent_exceptions	web2py.gluon.dal.BaseAdapter-class.html#represent_exceptions
+web2py.gluon.dal.PostgreSQLAdapter.sequence_name	web2py.gluon.dal.PostgreSQLAdapter-class.html#sequence_name
+web2py.gluon.dal.BaseAdapter.ADD	web2py.gluon.dal.BaseAdapter-class.html#ADD
+web2py.gluon.dal.BaseAdapter.count	web2py.gluon.dal.BaseAdapter-class.html#count
+web2py.gluon.dal.BaseAdapter.UPPER	web2py.gluon.dal.BaseAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.PostgreSQLAdapter.LIKE	web2py.gluon.dal.PostgreSQLAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.BaseAdapter.file_exists	web2py.gluon.dal.BaseAdapter-class.html#file_exists
+web2py.gluon.dal.BaseAdapter.delete	web2py.gluon.dal.BaseAdapter-class.html#delete
+web2py.gluon.dal.BaseAdapter.LOWER	web2py.gluon.dal.BaseAdapter-class.html#LOWER
+web2py.gluon.dal.BaseAdapter._update	web2py.gluon.dal.BaseAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.PostgreSQLAdapter.ENDSWITH	web2py.gluon.dal.PostgreSQLAdapter-class.html#ENDSWITH
+web2py.gluon.dal.BaseAdapter.constraint_name	web2py.gluon.dal.BaseAdapter-class.html#constraint_name
+web2py.gluon.dal.BaseAdapter.DIV	web2py.gluon.dal.BaseAdapter-class.html#DIV
+web2py.gluon.dal.PostgreSQLAdapter.__init__	web2py.gluon.dal.PostgreSQLAdapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.BaseAdapter.LE	web2py.gluon.dal.BaseAdapter-class.html#LE
+web2py.gluon.dal.BaseAdapter.file_open	web2py.gluon.dal.BaseAdapter-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.BaseAdapter.LT	web2py.gluon.dal.BaseAdapter-class.html#LT
+web2py.gluon.dal.BaseAdapter.COMMA	web2py.gluon.dal.BaseAdapter-class.html#COMMA
+web2py.gluon.dal.BaseAdapter.create_table	web2py.gluon.dal.BaseAdapter-class.html#create_table
+web2py.gluon.dal.BaseAdapter.bulk_insert	web2py.gluon.dal.BaseAdapter-class.html#bulk_insert
+web2py.gluon.dal.BaseAdapter.AGGREGATE	web2py.gluon.dal.BaseAdapter-class.html#AGGREGATE
+web2py.gluon.dal.BaseAdapter.file_close	web2py.gluon.dal.BaseAdapter-class.html#file_close
+web2py.gluon.dal.PostgreSQLAdapter.RANDOM	web2py.gluon.dal.PostgreSQLAdapter-class.html#RANDOM
+web2py.gluon.dal.BaseAdapter.truncate	web2py.gluon.dal.BaseAdapter-class.html#truncate
+web2py.gluon.dal.PostgreSQLAdapter.driver	psycopg2-module.html
+web2py.gluon.dal.BaseAdapter.update	web2py.gluon.dal.BaseAdapter-class.html#update
+web2py.gluon.dal.BaseAdapter.AS	web2py.gluon.dal.BaseAdapter-class.html#AS
+web2py.gluon.dal.BaseAdapter.trigger_name	web2py.gluon.dal.BaseAdapter-class.html#trigger_name
+web2py.gluon.dal.BaseAdapter.expand	web2py.gluon.dal.BaseAdapter-class.html#expand
+web2py.gluon.dal.BaseAdapter._count	web2py.gluon.dal.BaseAdapter-class.html#_count
+web2py.gluon.dal.PostgreSQLAdapter.CONTAINS	web2py.gluon.dal.PostgreSQLAdapter-class.html#CONTAINS
+web2py.gluon.dal.BaseAdapter.INVERT	web2py.gluon.dal.BaseAdapter-class.html#INVERT
+web2py.gluon.dal.BaseAdapter.alias	web2py.gluon.dal.BaseAdapter-class.html#alias
+web2py.gluon.dal.PostgreSQLAdapter.lastrowid	web2py.gluon.dal.PostgreSQLAdapter-class.html#lastrowid
+web2py.gluon.dal.Query	web2py.gluon.dal.Query-class.html
+web2py.gluon.dal.Query.__invert__	web2py.gluon.dal.Query-class.html#__invert__
+web2py.gluon.dal.Query.__str__	web2py.gluon.dal.Query-class.html#__str__
+web2py.gluon.dal.Query.__or__	web2py.gluon.dal.Query-class.html#__or__
+web2py.gluon.dal.Query.__and__	web2py.gluon.dal.Query-class.html#__and__
+web2py.gluon.dal.Query.__init__	web2py.gluon.dal.Query-class.html#__init__
+web2py.gluon.dal.Reference	web2py.gluon.dal.Reference-class.html
+web2py.gluon.dal.Reference.__setattr__	web2py.gluon.dal.Reference-class.html#__setattr__
+web2py.gluon.dal.Reference.__getattr__	web2py.gluon.dal.Reference-class.html#__getattr__
+web2py.gluon.dal.Reference.__getitem__	web2py.gluon.dal.Reference-class.html#__getitem__
+web2py.gluon.dal.Reference.__setitem__	web2py.gluon.dal.Reference-class.html#__setitem__
+web2py.gluon.dal.Reference.__allocate	web2py.gluon.dal.Reference-class.html#__allocate
+web2py.gluon.dal.Row	web2py.gluon.dal.Row-class.html
+web2py.gluon.dal.Row.__int__	web2py.gluon.dal.Row-class.html#__int__
+web2py.gluon.dal.Row.__setattr__	web2py.gluon.dal.Row-class.html#__setattr__
+web2py.gluon.dal.Row.__getattr__	web2py.gluon.dal.Row-class.html#__getattr__
+web2py.gluon.dal.Row.__call__	web2py.gluon.dal.Row-class.html#__call__
+web2py.gluon.dal.Row.__ne__	web2py.gluon.dal.Row-class.html#__ne__
+web2py.gluon.dal.Row.__getitem__	web2py.gluon.dal.Row-class.html#__getitem__
+web2py.gluon.dal.Row.as_dict	web2py.gluon.dal.Row-class.html#as_dict
+web2py.gluon.dal.Row.__setitem__	web2py.gluon.dal.Row-class.html#__setitem__
+web2py.gluon.dal.Row.__eq__	web2py.gluon.dal.Row-class.html#__eq__
+web2py.gluon.dal.Row.__repr__	web2py.gluon.dal.Row-class.html#__repr__
+web2py.gluon.dal.Row.__copy__	web2py.gluon.dal.Row-class.html#__copy__
+web2py.gluon.dal.Rows	web2py.gluon.dal.Rows-class.html
+web2py.gluon.dal.Rows.__getslice__	web2py.gluon.dal.Rows-class.html#__getslice__
+web2py.gluon.dal.Rows.__str__	web2py.gluon.dal.Rows-class.html#__str__
+web2py.gluon.dal.Rows.__and__	web2py.gluon.dal.Rows-class.html#__and__
+web2py.gluon.dal.Rows.exclude	web2py.gluon.dal.Rows-class.html#exclude
+web2py.gluon.dal.Rows.find	web2py.gluon.dal.Rows-class.html#find
+web2py.gluon.dal.Rows.__init__	web2py.gluon.dal.Rows-class.html#__init__
+web2py.gluon.dal.Rows.xml	web2py.gluon.dal.Rows-class.html#xml
+web2py.gluon.dal.Rows.setvirtualfields	web2py.gluon.dal.Rows-class.html#setvirtualfields
+web2py.gluon.dal.Rows.export_to_csv_file	web2py.gluon.dal.Rows-class.html#export_to_csv_file
+web2py.gluon.dal.Rows.json	web2py.gluon.dal.Rows-class.html#json
+web2py.gluon.dal.Rows.__len__	web2py.gluon.dal.Rows-class.html#__len__
+web2py.gluon.dal.Rows.sort	web2py.gluon.dal.Rows-class.html#sort
+web2py.gluon.dal.Rows.__getitem__	web2py.gluon.dal.Rows-class.html#__getitem__
+web2py.gluon.dal.Rows.as_dict	web2py.gluon.dal.Rows-class.html#as_dict
+web2py.gluon.dal.Rows.__iter__	web2py.gluon.dal.Rows-class.html#__iter__
+web2py.gluon.dal.Rows.__or__	web2py.gluon.dal.Rows-class.html#__or__
+web2py.gluon.dal.Rows.last	web2py.gluon.dal.Rows-class.html#last
+web2py.gluon.dal.Rows.__nonzero__	web2py.gluon.dal.Rows-class.html#__nonzero__
+web2py.gluon.dal.Rows.as_list	web2py.gluon.dal.Rows-class.html#as_list
+web2py.gluon.dal.Rows.first	web2py.gluon.dal.Rows-class.html#first
+web2py.gluon.dal.SAPDBAdapter	web2py.gluon.dal.SAPDBAdapter-class.html
+web2py.gluon.dal.BaseAdapter.represent	web2py.gluon.dal.BaseAdapter-class.html#represent
+web2py.gluon.dal.BaseAdapter.log_execute	web2py.gluon.dal.BaseAdapter-class.html#log_execute
+web2py.gluon.dal.SAPDBAdapter.select_limitby	web2py.gluon.dal.SAPDBAdapter-class.html#select_limitby
+web2py.gluon.dal.BaseAdapter._truncate	web2py.gluon.dal.BaseAdapter-class.html#_truncate
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.BaseAdapter.LEFT_JOIN	web2py.gluon.dal.BaseAdapter-class.html#LEFT_JOIN
+web2py.gluon.dal.BaseAdapter.distributed_transaction_begin	web2py.gluon.dal.BaseAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.BaseAdapter.GT	web2py.gluon.dal.BaseAdapter-class.html#GT
+web2py.gluon.dal.BaseAdapter.rollback	web2py.gluon.dal.BaseAdapter-class.html#rollback
+web2py.gluon.dal.BaseAdapter.ON	web2py.gluon.dal.BaseAdapter-class.html#ON
+web2py.gluon.dal.BaseAdapter.ALLOW_NULL	web2py.gluon.dal.BaseAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.BaseAdapter.maxcharlength	web2py.gluon.dal.BaseAdapter-class.html#maxcharlength
+web2py.gluon.dal.BaseAdapter.GE	web2py.gluon.dal.BaseAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.BaseAdapter._drop	web2py.gluon.dal.BaseAdapter-class.html#_drop
+web2py.gluon.dal.BaseAdapter.integrity_error_class	web2py.gluon.dal.BaseAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.BaseAdapter._select	web2py.gluon.dal.BaseAdapter-class.html#_select
+web2py.gluon.dal.BaseAdapter.insert	web2py.gluon.dal.BaseAdapter-class.html#insert
+web2py.gluon.dal.BaseAdapter.execute	web2py.gluon.dal.BaseAdapter-class.html#execute
+web2py.gluon.dal.BaseAdapter.drop	web2py.gluon.dal.BaseAdapter-class.html#drop
+web2py.gluon.dal.BaseAdapter.migrate_table	web2py.gluon.dal.BaseAdapter-class.html#migrate_table
+web2py.gluon.dal.BaseAdapter.concat_add	web2py.gluon.dal.BaseAdapter-class.html#concat_add
+web2py.gluon.dal.BaseAdapter._insert	web2py.gluon.dal.BaseAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.SAPDBAdapter.support_distributed_transaction	web2py.gluon.dal.SAPDBAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.BaseAdapter.OR	web2py.gluon.dal.BaseAdapter-class.html#OR
+web2py.gluon.dal.BaseAdapter.file_delete	web2py.gluon.dal.BaseAdapter-class.html#file_delete
+web2py.gluon.dal.BaseAdapter.NOT_NULL	web2py.gluon.dal.BaseAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.BaseAdapter.close	web2py.gluon.dal.BaseAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.BaseAdapter.rowslice	web2py.gluon.dal.BaseAdapter-class.html#rowslice
+web2py.gluon.dal.SAPDBAdapter.create_sequence_and_triggers	web2py.gluon.dal.SAPDBAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.BaseAdapter.rollback_prepared	web2py.gluon.dal.BaseAdapter-class.html#rollback_prepared
+web2py.gluon.dal.BaseAdapter.commit_prepared	web2py.gluon.dal.BaseAdapter-class.html#commit_prepared
+web2py.gluon.dal.BaseAdapter.EQ	web2py.gluon.dal.BaseAdapter-class.html#EQ
+web2py.gluon.dal.BaseAdapter.AND	web2py.gluon.dal.BaseAdapter-class.html#AND
+web2py.gluon.dal.BaseAdapter.uploads_in_blob	web2py.gluon.dal.BaseAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.BaseAdapter.NOT	web2py.gluon.dal.BaseAdapter-class.html#NOT
+web2py.gluon.dal.BaseAdapter.commit	web2py.gluon.dal.BaseAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.BaseAdapter.STARTSWITH	web2py.gluon.dal.BaseAdapter-class.html#STARTSWITH
+web2py.gluon.dal.BaseAdapter.SUB	web2py.gluon.dal.BaseAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.BaseAdapter._delete	web2py.gluon.dal.BaseAdapter-class.html#_delete
+web2py.gluon.dal.BaseAdapter.BELONGS	web2py.gluon.dal.BaseAdapter-class.html#BELONGS
+web2py.gluon.dal.BaseAdapter.MUL	web2py.gluon.dal.BaseAdapter-class.html#MUL
+web2py.gluon.dal.BaseAdapter.select	web2py.gluon.dal.BaseAdapter-class.html#select
+web2py.gluon.dal.BaseAdapter.PRIMARY_KEY	web2py.gluon.dal.BaseAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.BaseAdapter.prepare	web2py.gluon.dal.BaseAdapter-class.html#prepare
+web2py.gluon.dal.BaseAdapter.NE	web2py.gluon.dal.BaseAdapter-class.html#NE
+web2py.gluon.dal.BaseAdapter.SUBSTRING	web2py.gluon.dal.BaseAdapter-class.html#SUBSTRING
+web2py.gluon.dal.SAPDBAdapter.types	web2py.gluon.dal.SAPDBAdapter-class.html#types
+web2py.gluon.dal.BaseAdapter.EXTRACT	web2py.gluon.dal.BaseAdapter-class.html#EXTRACT
+web2py.gluon.dal.BaseAdapter.commit_on_alter_table	web2py.gluon.dal.BaseAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.BaseAdapter.represent_exceptions	web2py.gluon.dal.BaseAdapter-class.html#represent_exceptions
+web2py.gluon.dal.SAPDBAdapter.sequence_name	web2py.gluon.dal.SAPDBAdapter-class.html#sequence_name
+web2py.gluon.dal.BaseAdapter.ADD	web2py.gluon.dal.BaseAdapter-class.html#ADD
+web2py.gluon.dal.BaseAdapter.count	web2py.gluon.dal.BaseAdapter-class.html#count
+web2py.gluon.dal.BaseAdapter.UPPER	web2py.gluon.dal.BaseAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.BaseAdapter.LIKE	web2py.gluon.dal.BaseAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.BaseAdapter.file_exists	web2py.gluon.dal.BaseAdapter-class.html#file_exists
+web2py.gluon.dal.BaseAdapter.delete	web2py.gluon.dal.BaseAdapter-class.html#delete
+web2py.gluon.dal.BaseAdapter.LOWER	web2py.gluon.dal.BaseAdapter-class.html#LOWER
+web2py.gluon.dal.BaseAdapter._update	web2py.gluon.dal.BaseAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.BaseAdapter.ENDSWITH	web2py.gluon.dal.BaseAdapter-class.html#ENDSWITH
+web2py.gluon.dal.BaseAdapter.constraint_name	web2py.gluon.dal.BaseAdapter-class.html#constraint_name
+web2py.gluon.dal.BaseAdapter.DIV	web2py.gluon.dal.BaseAdapter-class.html#DIV
+web2py.gluon.dal.SAPDBAdapter.__init__	web2py.gluon.dal.SAPDBAdapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.BaseAdapter.LE	web2py.gluon.dal.BaseAdapter-class.html#LE
+web2py.gluon.dal.BaseAdapter.file_open	web2py.gluon.dal.BaseAdapter-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.BaseAdapter.LT	web2py.gluon.dal.BaseAdapter-class.html#LT
+web2py.gluon.dal.BaseAdapter.COMMA	web2py.gluon.dal.BaseAdapter-class.html#COMMA
+web2py.gluon.dal.BaseAdapter.create_table	web2py.gluon.dal.BaseAdapter-class.html#create_table
+web2py.gluon.dal.BaseAdapter.bulk_insert	web2py.gluon.dal.BaseAdapter-class.html#bulk_insert
+web2py.gluon.dal.BaseAdapter.AGGREGATE	web2py.gluon.dal.BaseAdapter-class.html#AGGREGATE
+web2py.gluon.dal.BaseAdapter.file_close	web2py.gluon.dal.BaseAdapter-class.html#file_close
+web2py.gluon.dal.BaseAdapter.RANDOM	web2py.gluon.dal.BaseAdapter-class.html#RANDOM
+web2py.gluon.dal.BaseAdapter.truncate	web2py.gluon.dal.BaseAdapter-class.html#truncate
+web2py.gluon.dal.SAPDBAdapter.driver	web2py.gluon.dal.SAPDBAdapter-class.html#driver
+web2py.gluon.dal.BaseAdapter.update	web2py.gluon.dal.BaseAdapter-class.html#update
+web2py.gluon.dal.BaseAdapter.AS	web2py.gluon.dal.BaseAdapter-class.html#AS
+web2py.gluon.dal.BaseAdapter.trigger_name	web2py.gluon.dal.BaseAdapter-class.html#trigger_name
+web2py.gluon.dal.BaseAdapter.expand	web2py.gluon.dal.BaseAdapter-class.html#expand
+web2py.gluon.dal.BaseAdapter._count	web2py.gluon.dal.BaseAdapter-class.html#_count
+web2py.gluon.dal.BaseAdapter.CONTAINS	web2py.gluon.dal.BaseAdapter-class.html#CONTAINS
+web2py.gluon.dal.BaseAdapter.INVERT	web2py.gluon.dal.BaseAdapter-class.html#INVERT
+web2py.gluon.dal.BaseAdapter.alias	web2py.gluon.dal.BaseAdapter-class.html#alias
+web2py.gluon.dal.SAPDBAdapter.lastrowid	web2py.gluon.dal.SAPDBAdapter-class.html#lastrowid
+web2py.gluon.dal.SQLALL	web2py.gluon.dal.SQLALL-class.html
+web2py.gluon.dal.SQLALL.__str__	web2py.gluon.dal.SQLALL-class.html#__str__
+web2py.gluon.dal.SQLALL.__init__	web2py.gluon.dal.SQLALL-class.html#__init__
+web2py.gluon.dal.SQLCallableList	web2py.gluon.dal.SQLCallableList-class.html
+web2py.gluon.dal.SQLCallableList.__call__	web2py.gluon.dal.SQLCallableList-class.html#__call__
+web2py.gluon.dal.SQLCustomType	web2py.gluon.dal.SQLCustomType-class.html
+web2py.gluon.dal.SQLCustomType.startswith	web2py.gluon.dal.SQLCustomType-class.html#startswith
+web2py.gluon.dal.SQLCustomType.__getslice__	web2py.gluon.dal.SQLCustomType-class.html#__getslice__
+web2py.gluon.dal.SQLCustomType.__getitem__	web2py.gluon.dal.SQLCustomType-class.html#__getitem__
+web2py.gluon.dal.SQLCustomType.__str__	web2py.gluon.dal.SQLCustomType-class.html#__str__
+web2py.gluon.dal.SQLCustomType.__init__	web2py.gluon.dal.SQLCustomType-class.html#__init__
+web2py.gluon.dal.SQLiteAdapter	web2py.gluon.dal.SQLiteAdapter-class.html
+web2py.gluon.dal.BaseAdapter.represent	web2py.gluon.dal.BaseAdapter-class.html#represent
+web2py.gluon.dal.BaseAdapter.log_execute	web2py.gluon.dal.BaseAdapter-class.html#log_execute
+web2py.gluon.dal.BaseAdapter.select_limitby	web2py.gluon.dal.BaseAdapter-class.html#select_limitby
+web2py.gluon.dal.SQLiteAdapter._truncate	web2py.gluon.dal.SQLiteAdapter-class.html#_truncate
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.BaseAdapter.LEFT_JOIN	web2py.gluon.dal.BaseAdapter-class.html#LEFT_JOIN
+web2py.gluon.dal.BaseAdapter.distributed_transaction_begin	web2py.gluon.dal.BaseAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.BaseAdapter.GT	web2py.gluon.dal.BaseAdapter-class.html#GT
+web2py.gluon.dal.BaseAdapter.rollback	web2py.gluon.dal.BaseAdapter-class.html#rollback
+web2py.gluon.dal.BaseAdapter.ON	web2py.gluon.dal.BaseAdapter-class.html#ON
+web2py.gluon.dal.BaseAdapter.ALLOW_NULL	web2py.gluon.dal.BaseAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.BaseAdapter.maxcharlength	web2py.gluon.dal.BaseAdapter-class.html#maxcharlength
+web2py.gluon.dal.BaseAdapter.GE	web2py.gluon.dal.BaseAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.BaseAdapter._drop	web2py.gluon.dal.BaseAdapter-class.html#_drop
+web2py.gluon.dal.BaseAdapter.integrity_error_class	web2py.gluon.dal.BaseAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.BaseAdapter._select	web2py.gluon.dal.BaseAdapter-class.html#_select
+web2py.gluon.dal.BaseAdapter.insert	web2py.gluon.dal.BaseAdapter-class.html#insert
+web2py.gluon.dal.BaseAdapter.execute	web2py.gluon.dal.BaseAdapter-class.html#execute
+web2py.gluon.dal.BaseAdapter.drop	web2py.gluon.dal.BaseAdapter-class.html#drop
+web2py.gluon.dal.BaseAdapter.migrate_table	web2py.gluon.dal.BaseAdapter-class.html#migrate_table
+web2py.gluon.dal.BaseAdapter.concat_add	web2py.gluon.dal.BaseAdapter-class.html#concat_add
+web2py.gluon.dal.BaseAdapter._insert	web2py.gluon.dal.BaseAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.BaseAdapter.support_distributed_transaction	web2py.gluon.dal.BaseAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.BaseAdapter.OR	web2py.gluon.dal.BaseAdapter-class.html#OR
+web2py.gluon.dal.BaseAdapter.file_delete	web2py.gluon.dal.BaseAdapter-class.html#file_delete
+web2py.gluon.dal.BaseAdapter.NOT_NULL	web2py.gluon.dal.BaseAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.BaseAdapter.close	web2py.gluon.dal.BaseAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.BaseAdapter.rowslice	web2py.gluon.dal.BaseAdapter-class.html#rowslice
+web2py.gluon.dal.BaseAdapter.create_sequence_and_triggers	web2py.gluon.dal.BaseAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.BaseAdapter.rollback_prepared	web2py.gluon.dal.BaseAdapter-class.html#rollback_prepared
+web2py.gluon.dal.BaseAdapter.commit_prepared	web2py.gluon.dal.BaseAdapter-class.html#commit_prepared
+web2py.gluon.dal.SQLiteAdapter.web2py_extract	web2py.gluon.dal.SQLiteAdapter-class.html#web2py_extract
+web2py.gluon.dal.BaseAdapter.EQ	web2py.gluon.dal.BaseAdapter-class.html#EQ
+web2py.gluon.dal.BaseAdapter.AND	web2py.gluon.dal.BaseAdapter-class.html#AND
+web2py.gluon.dal.BaseAdapter.uploads_in_blob	web2py.gluon.dal.BaseAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.BaseAdapter.NOT	web2py.gluon.dal.BaseAdapter-class.html#NOT
+web2py.gluon.dal.BaseAdapter.commit	web2py.gluon.dal.BaseAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.BaseAdapter.STARTSWITH	web2py.gluon.dal.BaseAdapter-class.html#STARTSWITH
+web2py.gluon.dal.BaseAdapter.SUB	web2py.gluon.dal.BaseAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.BaseAdapter._delete	web2py.gluon.dal.BaseAdapter-class.html#_delete
+web2py.gluon.dal.BaseAdapter.BELONGS	web2py.gluon.dal.BaseAdapter-class.html#BELONGS
+web2py.gluon.dal.BaseAdapter.MUL	web2py.gluon.dal.BaseAdapter-class.html#MUL
+web2py.gluon.dal.BaseAdapter.select	web2py.gluon.dal.BaseAdapter-class.html#select
+web2py.gluon.dal.BaseAdapter.PRIMARY_KEY	web2py.gluon.dal.BaseAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.BaseAdapter.prepare	web2py.gluon.dal.BaseAdapter-class.html#prepare
+web2py.gluon.dal.BaseAdapter.NE	web2py.gluon.dal.BaseAdapter-class.html#NE
+web2py.gluon.dal.BaseAdapter.SUBSTRING	web2py.gluon.dal.BaseAdapter-class.html#SUBSTRING
+web2py.gluon.dal.BaseAdapter.types	web2py.gluon.dal.BaseAdapter-class.html#types
+web2py.gluon.dal.SQLiteAdapter.EXTRACT	web2py.gluon.dal.SQLiteAdapter-class.html#EXTRACT
+web2py.gluon.dal.BaseAdapter.commit_on_alter_table	web2py.gluon.dal.BaseAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.BaseAdapter.represent_exceptions	web2py.gluon.dal.BaseAdapter-class.html#represent_exceptions
+web2py.gluon.dal.BaseAdapter.sequence_name	web2py.gluon.dal.BaseAdapter-class.html#sequence_name
+web2py.gluon.dal.BaseAdapter.ADD	web2py.gluon.dal.BaseAdapter-class.html#ADD
+web2py.gluon.dal.BaseAdapter.count	web2py.gluon.dal.BaseAdapter-class.html#count
+web2py.gluon.dal.BaseAdapter.UPPER	web2py.gluon.dal.BaseAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.BaseAdapter.LIKE	web2py.gluon.dal.BaseAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.BaseAdapter.file_exists	web2py.gluon.dal.BaseAdapter-class.html#file_exists
+web2py.gluon.dal.BaseAdapter.delete	web2py.gluon.dal.BaseAdapter-class.html#delete
+web2py.gluon.dal.BaseAdapter.LOWER	web2py.gluon.dal.BaseAdapter-class.html#LOWER
+web2py.gluon.dal.BaseAdapter._update	web2py.gluon.dal.BaseAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.BaseAdapter.ENDSWITH	web2py.gluon.dal.BaseAdapter-class.html#ENDSWITH
+web2py.gluon.dal.BaseAdapter.constraint_name	web2py.gluon.dal.BaseAdapter-class.html#constraint_name
+web2py.gluon.dal.BaseAdapter.DIV	web2py.gluon.dal.BaseAdapter-class.html#DIV
+web2py.gluon.dal.SQLiteAdapter.__init__	web2py.gluon.dal.SQLiteAdapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.BaseAdapter.LE	web2py.gluon.dal.BaseAdapter-class.html#LE
+web2py.gluon.dal.BaseAdapter.file_open	web2py.gluon.dal.BaseAdapter-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.BaseAdapter.LT	web2py.gluon.dal.BaseAdapter-class.html#LT
+web2py.gluon.dal.BaseAdapter.COMMA	web2py.gluon.dal.BaseAdapter-class.html#COMMA
+web2py.gluon.dal.BaseAdapter.create_table	web2py.gluon.dal.BaseAdapter-class.html#create_table
+web2py.gluon.dal.BaseAdapter.bulk_insert	web2py.gluon.dal.BaseAdapter-class.html#bulk_insert
+web2py.gluon.dal.BaseAdapter.AGGREGATE	web2py.gluon.dal.BaseAdapter-class.html#AGGREGATE
+web2py.gluon.dal.BaseAdapter.file_close	web2py.gluon.dal.BaseAdapter-class.html#file_close
+web2py.gluon.dal.BaseAdapter.RANDOM	web2py.gluon.dal.BaseAdapter-class.html#RANDOM
+web2py.gluon.dal.BaseAdapter.truncate	web2py.gluon.dal.BaseAdapter-class.html#truncate
+web2py.gluon.dal.SQLiteAdapter.driver	sqlite3.dbapi2-module.html
+web2py.gluon.dal.BaseAdapter.update	web2py.gluon.dal.BaseAdapter-class.html#update
+web2py.gluon.dal.BaseAdapter.AS	web2py.gluon.dal.BaseAdapter-class.html#AS
+web2py.gluon.dal.BaseAdapter.trigger_name	web2py.gluon.dal.BaseAdapter-class.html#trigger_name
+web2py.gluon.dal.BaseAdapter.expand	web2py.gluon.dal.BaseAdapter-class.html#expand
+web2py.gluon.dal.BaseAdapter._count	web2py.gluon.dal.BaseAdapter-class.html#_count
+web2py.gluon.dal.BaseAdapter.CONTAINS	web2py.gluon.dal.BaseAdapter-class.html#CONTAINS
+web2py.gluon.dal.BaseAdapter.INVERT	web2py.gluon.dal.BaseAdapter-class.html#INVERT
+web2py.gluon.dal.BaseAdapter.alias	web2py.gluon.dal.BaseAdapter-class.html#alias
+web2py.gluon.dal.SQLiteAdapter.lastrowid	web2py.gluon.dal.SQLiteAdapter-class.html#lastrowid
+web2py.gluon.dal.Set	web2py.gluon.dal.Set-class.html
+web2py.gluon.dal.Set.delete_uploaded_files	web2py.gluon.dal.Set-class.html#delete_uploaded_files
+web2py.gluon.dal.Set._update	web2py.gluon.dal.Set-class.html#_update
+web2py.gluon.dal.Set._delete	web2py.gluon.dal.Set-class.html#_delete
+web2py.gluon.dal.Set.select	web2py.gluon.dal.Set-class.html#select
+web2py.gluon.dal.Set.__init__	web2py.gluon.dal.Set-class.html#__init__
+web2py.gluon.dal.Set.__call__	web2py.gluon.dal.Set-class.html#__call__
+web2py.gluon.dal.Set.count	web2py.gluon.dal.Set-class.html#count
+web2py.gluon.dal.Set.update	web2py.gluon.dal.Set-class.html#update
+web2py.gluon.dal.Set.isempty	web2py.gluon.dal.Set-class.html#isempty
+web2py.gluon.dal.Set.validate_and_update	web2py.gluon.dal.Set-class.html#validate_and_update
+web2py.gluon.dal.Set._select	web2py.gluon.dal.Set-class.html#_select
+web2py.gluon.dal.Set._count	web2py.gluon.dal.Set-class.html#_count
+web2py.gluon.dal.Set.delete	web2py.gluon.dal.Set-class.html#delete
+web2py.gluon.dal.Table	web2py.gluon.dal.Table-class.html
+web2py.gluon.dal.Table._listify	web2py.gluon.dal.Table-class.html#_listify
+web2py.gluon.dal.Table._validate	web2py.gluon.dal.Table-class.html#_validate
+web2py.gluon.dal.Table.__str__	web2py.gluon.dal.Table-class.html#__str__
+web2py.gluon.dal.Table._build_query	web2py.gluon.dal.Table-class.html#_build_query
+web2py.gluon.dal.Table.__delitem__	web2py.gluon.dal.Table-class.html#__delitem__
+web2py.gluon.dal.Table._truncate	web2py.gluon.dal.Table-class.html#_truncate
+web2py.gluon.dal.Table.__init__	web2py.gluon.dal.Table-class.html#__init__
+web2py.gluon.dal.Table.validate_and_insert	web2py.gluon.dal.Table-class.html#validate_and_insert
+web2py.gluon.dal.Table.import_from_csv_file	web2py.gluon.dal.Table-class.html#import_from_csv_file
+web2py.gluon.dal.Table.__setattr__	web2py.gluon.dal.Table-class.html#__setattr__
+web2py.gluon.dal.Table.truncate	web2py.gluon.dal.Table-class.html#truncate
+web2py.gluon.dal.Table.__getattr__	web2py.gluon.dal.Table-class.html#__getattr__
+web2py.gluon.dal.Table._filter_fields	web2py.gluon.dal.Table-class.html#_filter_fields
+web2py.gluon.dal.Table.with_alias	web2py.gluon.dal.Table-class.html#with_alias
+web2py.gluon.dal.Table.__call__	web2py.gluon.dal.Table-class.html#__call__
+web2py.gluon.dal.Table.__getitem__	web2py.gluon.dal.Table-class.html#__getitem__
+web2py.gluon.dal.Table.on	web2py.gluon.dal.Table-class.html#on
+web2py.gluon.dal.Table.bulk_insert	web2py.gluon.dal.Table-class.html#bulk_insert
+web2py.gluon.dal.Table.__setitem__	web2py.gluon.dal.Table-class.html#__setitem__
+web2py.gluon.dal.Table._drop	web2py.gluon.dal.Table-class.html#_drop
+web2py.gluon.dal.Table.insert	web2py.gluon.dal.Table-class.html#insert
+web2py.gluon.dal.Table.drop	web2py.gluon.dal.Table-class.html#drop
+web2py.gluon.dal.Table.__iter__	web2py.gluon.dal.Table-class.html#__iter__
+web2py.gluon.dal.Table.update_or_insert	web2py.gluon.dal.Table-class.html#update_or_insert
+web2py.gluon.dal.Table.__repr__	web2py.gluon.dal.Table-class.html#__repr__
+web2py.gluon.dal.Table._insert	web2py.gluon.dal.Table-class.html#_insert
+web2py.gluon.dal.Table._create_references	web2py.gluon.dal.Table-class.html#_create_references
+web2py.gluon.dal.TeradataAdapter	web2py.gluon.dal.TeradataAdapter-class.html
+web2py.gluon.dal.BaseAdapter.represent	web2py.gluon.dal.BaseAdapter-class.html#represent
+web2py.gluon.dal.BaseAdapter.log_execute	web2py.gluon.dal.BaseAdapter-class.html#log_execute
+web2py.gluon.dal.DB2Adapter.select_limitby	web2py.gluon.dal.DB2Adapter-class.html#select_limitby
+web2py.gluon.dal.BaseAdapter._truncate	web2py.gluon.dal.BaseAdapter-class.html#_truncate
+web2py.gluon.dal.BaseAdapter.tables	web2py.gluon.dal.BaseAdapter-class.html#tables
+web2py.gluon.dal.DB2Adapter.LEFT_JOIN	web2py.gluon.dal.DB2Adapter-class.html#LEFT_JOIN
+web2py.gluon.dal.BaseAdapter.distributed_transaction_begin	web2py.gluon.dal.BaseAdapter-class.html#distributed_transaction_begin
+web2py.gluon.dal.BaseAdapter.GT	web2py.gluon.dal.BaseAdapter-class.html#GT
+web2py.gluon.dal.BaseAdapter.rollback	web2py.gluon.dal.BaseAdapter-class.html#rollback
+web2py.gluon.dal.BaseAdapter.ON	web2py.gluon.dal.BaseAdapter-class.html#ON
+web2py.gluon.dal.BaseAdapter.ALLOW_NULL	web2py.gluon.dal.BaseAdapter-class.html#ALLOW_NULL
+web2py.gluon.dal.BaseAdapter.maxcharlength	web2py.gluon.dal.BaseAdapter-class.html#maxcharlength
+web2py.gluon.dal.BaseAdapter.GE	web2py.gluon.dal.BaseAdapter-class.html#GE
+web2py.gluon.dal.BaseAdapter.get_table	web2py.gluon.dal.BaseAdapter-class.html#get_table
+web2py.gluon.dal.BaseAdapter._drop	web2py.gluon.dal.BaseAdapter-class.html#_drop
+web2py.gluon.dal.BaseAdapter.integrity_error_class	web2py.gluon.dal.BaseAdapter-class.html#integrity_error_class
+web2py.gluon.dal.ConnectionPool.pool_connection	web2py.gluon.dal.ConnectionPool-class.html#pool_connection
+web2py.gluon.dal.BaseAdapter._select	web2py.gluon.dal.BaseAdapter-class.html#_select
+web2py.gluon.dal.BaseAdapter.insert	web2py.gluon.dal.BaseAdapter-class.html#insert
+web2py.gluon.dal.DB2Adapter.execute	web2py.gluon.dal.DB2Adapter-class.html#execute
+web2py.gluon.dal.BaseAdapter.drop	web2py.gluon.dal.BaseAdapter-class.html#drop
+web2py.gluon.dal.BaseAdapter.migrate_table	web2py.gluon.dal.BaseAdapter-class.html#migrate_table
+web2py.gluon.dal.BaseAdapter.concat_add	web2py.gluon.dal.BaseAdapter-class.html#concat_add
+web2py.gluon.dal.BaseAdapter._insert	web2py.gluon.dal.BaseAdapter-class.html#_insert
+web2py.gluon.dal.ConnectionPool.pools	web2py.gluon.dal.ConnectionPool-class.html#pools
+web2py.gluon.dal.BaseAdapter.support_distributed_transaction	web2py.gluon.dal.BaseAdapter-class.html#support_distributed_transaction
+web2py.gluon.dal.BaseAdapter.OR	web2py.gluon.dal.BaseAdapter-class.html#OR
+web2py.gluon.dal.BaseAdapter.file_delete	web2py.gluon.dal.BaseAdapter-class.html#file_delete
+web2py.gluon.dal.BaseAdapter.NOT_NULL	web2py.gluon.dal.BaseAdapter-class.html#NOT_NULL
+web2py.gluon.dal.ConnectionPool.find_or_make_work_folder	web2py.gluon.dal.ConnectionPool-class.html#find_or_make_work_folder
+web2py.gluon.dal.BaseAdapter.close	web2py.gluon.dal.BaseAdapter-class.html#close
+web2py.gluon.dal.BaseAdapter.integrity_error	web2py.gluon.dal.BaseAdapter-class.html#integrity_error
+web2py.gluon.dal.DB2Adapter.rowslice	web2py.gluon.dal.DB2Adapter-class.html#rowslice
+web2py.gluon.dal.BaseAdapter.create_sequence_and_triggers	web2py.gluon.dal.BaseAdapter-class.html#create_sequence_and_triggers
+web2py.gluon.dal.BaseAdapter.rollback_prepared	web2py.gluon.dal.BaseAdapter-class.html#rollback_prepared
+web2py.gluon.dal.BaseAdapter.commit_prepared	web2py.gluon.dal.BaseAdapter-class.html#commit_prepared
+web2py.gluon.dal.BaseAdapter.EQ	web2py.gluon.dal.BaseAdapter-class.html#EQ
+web2py.gluon.dal.BaseAdapter.AND	web2py.gluon.dal.BaseAdapter-class.html#AND
+web2py.gluon.dal.BaseAdapter.uploads_in_blob	web2py.gluon.dal.BaseAdapter-class.html#uploads_in_blob
+web2py.gluon.dal.BaseAdapter.NOT	web2py.gluon.dal.BaseAdapter-class.html#NOT
+web2py.gluon.dal.BaseAdapter.commit	web2py.gluon.dal.BaseAdapter-class.html#commit
+web2py.gluon.dal.BaseAdapter.MOD	web2py.gluon.dal.BaseAdapter-class.html#MOD
+web2py.gluon.dal.BaseAdapter.STARTSWITH	web2py.gluon.dal.BaseAdapter-class.html#STARTSWITH
+web2py.gluon.dal.BaseAdapter.SUB	web2py.gluon.dal.BaseAdapter-class.html#SUB
+web2py.gluon.dal.BaseAdapter.COALESCE_ZERO	web2py.gluon.dal.BaseAdapter-class.html#COALESCE_ZERO
+web2py.gluon.dal.BaseAdapter._delete	web2py.gluon.dal.BaseAdapter-class.html#_delete
+web2py.gluon.dal.BaseAdapter.BELONGS	web2py.gluon.dal.BaseAdapter-class.html#BELONGS
+web2py.gluon.dal.BaseAdapter.MUL	web2py.gluon.dal.BaseAdapter-class.html#MUL
+web2py.gluon.dal.BaseAdapter.select	web2py.gluon.dal.BaseAdapter-class.html#select
+web2py.gluon.dal.BaseAdapter.PRIMARY_KEY	web2py.gluon.dal.BaseAdapter-class.html#PRIMARY_KEY
+web2py.gluon.dal.BaseAdapter.prepare	web2py.gluon.dal.BaseAdapter-class.html#prepare
+web2py.gluon.dal.BaseAdapter.NE	web2py.gluon.dal.BaseAdapter-class.html#NE
+web2py.gluon.dal.BaseAdapter.SUBSTRING	web2py.gluon.dal.BaseAdapter-class.html#SUBSTRING
+web2py.gluon.dal.TeradataAdapter.types	web2py.gluon.dal.TeradataAdapter-class.html#types
+web2py.gluon.dal.BaseAdapter.EXTRACT	web2py.gluon.dal.BaseAdapter-class.html#EXTRACT
+web2py.gluon.dal.BaseAdapter.commit_on_alter_table	web2py.gluon.dal.BaseAdapter-class.html#commit_on_alter_table
+web2py.gluon.dal.DB2Adapter.represent_exceptions	web2py.gluon.dal.DB2Adapter-class.html#represent_exceptions
+web2py.gluon.dal.BaseAdapter.sequence_name	web2py.gluon.dal.BaseAdapter-class.html#sequence_name
+web2py.gluon.dal.BaseAdapter.ADD	web2py.gluon.dal.BaseAdapter-class.html#ADD
+web2py.gluon.dal.BaseAdapter.count	web2py.gluon.dal.BaseAdapter-class.html#count
+web2py.gluon.dal.BaseAdapter.UPPER	web2py.gluon.dal.BaseAdapter-class.html#UPPER
+web2py.gluon.dal.BaseAdapter.JOIN	web2py.gluon.dal.BaseAdapter-class.html#JOIN
+web2py.gluon.dal.BaseAdapter.LIKE	web2py.gluon.dal.BaseAdapter-class.html#LIKE
+web2py.gluon.dal.ConnectionPool.close_all_instances	web2py.gluon.dal.ConnectionPool-class.html#close_all_instances
+web2py.gluon.dal.BaseAdapter.file_exists	web2py.gluon.dal.BaseAdapter-class.html#file_exists
+web2py.gluon.dal.BaseAdapter.delete	web2py.gluon.dal.BaseAdapter-class.html#delete
+web2py.gluon.dal.BaseAdapter.LOWER	web2py.gluon.dal.BaseAdapter-class.html#LOWER
+web2py.gluon.dal.BaseAdapter._update	web2py.gluon.dal.BaseAdapter-class.html#_update
+web2py.gluon.dal.BaseAdapter.parse	web2py.gluon.dal.BaseAdapter-class.html#parse
+web2py.gluon.dal.BaseAdapter.ENDSWITH	web2py.gluon.dal.BaseAdapter-class.html#ENDSWITH
+web2py.gluon.dal.BaseAdapter.constraint_name	web2py.gluon.dal.BaseAdapter-class.html#constraint_name
+web2py.gluon.dal.BaseAdapter.DIV	web2py.gluon.dal.BaseAdapter-class.html#DIV
+web2py.gluon.dal.TeradataAdapter.__init__	web2py.gluon.dal.TeradataAdapter-class.html#__init__
+web2py.gluon.dal.BaseAdapter.filter_tenant	web2py.gluon.dal.BaseAdapter-class.html#filter_tenant
+web2py.gluon.dal.BaseAdapter.LE	web2py.gluon.dal.BaseAdapter-class.html#LE
+web2py.gluon.dal.BaseAdapter.file_open	web2py.gluon.dal.BaseAdapter-class.html#file_open
+web2py.gluon.dal.ConnectionPool.set_folder	web2py.gluon.dal.ConnectionPool-class.html#set_folder
+web2py.gluon.dal.BaseAdapter.LT	web2py.gluon.dal.BaseAdapter-class.html#LT
+web2py.gluon.dal.BaseAdapter.COMMA	web2py.gluon.dal.BaseAdapter-class.html#COMMA
+web2py.gluon.dal.BaseAdapter.create_table	web2py.gluon.dal.BaseAdapter-class.html#create_table
+web2py.gluon.dal.BaseAdapter.bulk_insert	web2py.gluon.dal.BaseAdapter-class.html#bulk_insert
+web2py.gluon.dal.BaseAdapter.AGGREGATE	web2py.gluon.dal.BaseAdapter-class.html#AGGREGATE
+web2py.gluon.dal.BaseAdapter.file_close	web2py.gluon.dal.BaseAdapter-class.html#file_close
+web2py.gluon.dal.DB2Adapter.RANDOM	web2py.gluon.dal.DB2Adapter-class.html#RANDOM
+web2py.gluon.dal.BaseAdapter.truncate	web2py.gluon.dal.BaseAdapter-class.html#truncate
+web2py.gluon.dal.TeradataAdapter.driver	web2py.gluon.dal.TeradataAdapter-class.html#driver
+web2py.gluon.dal.BaseAdapter.update	web2py.gluon.dal.BaseAdapter-class.html#update
+web2py.gluon.dal.BaseAdapter.AS	web2py.gluon.dal.BaseAdapter-class.html#AS
+web2py.gluon.dal.BaseAdapter.trigger_name	web2py.gluon.dal.BaseAdapter-class.html#trigger_name
+web2py.gluon.dal.BaseAdapter.expand	web2py.gluon.dal.BaseAdapter-class.html#expand
+web2py.gluon.dal.BaseAdapter._count	web2py.gluon.dal.BaseAdapter-class.html#_count
+web2py.gluon.dal.BaseAdapter.CONTAINS	web2py.gluon.dal.BaseAdapter-class.html#CONTAINS
+web2py.gluon.dal.BaseAdapter.INVERT	web2py.gluon.dal.BaseAdapter-class.html#INVERT
+web2py.gluon.dal.BaseAdapter.alias	web2py.gluon.dal.BaseAdapter-class.html#alias
+web2py.gluon.dal.DB2Adapter.lastrowid	web2py.gluon.dal.DB2Adapter-class.html#lastrowid
+web2py.gluon.dal.UseDatabaseStoredFile	web2py.gluon.dal.UseDatabaseStoredFile-class.html
+web2py.gluon.dal.UseDatabaseStoredFile.file_close	web2py.gluon.dal.UseDatabaseStoredFile-class.html#file_close
+web2py.gluon.dal.UseDatabaseStoredFile.file_exists	web2py.gluon.dal.UseDatabaseStoredFile-class.html#file_exists
+web2py.gluon.dal.UseDatabaseStoredFile.file_delete	web2py.gluon.dal.UseDatabaseStoredFile-class.html#file_delete
+web2py.gluon.dal.UseDatabaseStoredFile.file_open	web2py.gluon.dal.UseDatabaseStoredFile-class.html#file_open
+web2py.gluon.debug.Pipe	web2py.gluon.debug.Pipe-class.html
+web2py.gluon.debug.Pipe.read	web2py.gluon.debug.Pipe-class.html#read
+web2py.gluon.debug.Pipe.write	web2py.gluon.debug.Pipe-class.html#write
+web2py.gluon.debug.Pipe.flush	web2py.gluon.debug.Pipe-class.html#flush
+web2py.gluon.debug.Pipe.readline	web2py.gluon.debug.Pipe-class.html#readline
+web2py.gluon.debug.Pipe.__init__	web2py.gluon.debug.Pipe-class.html#__init__
+web2py.gluon.globals.Request	web2py.gluon.globals.Request-class.html
+web2py.gluon.storage.Storage.getlist	web2py.gluon.storage.Storage-class.html#getlist
+web2py.gluon.globals.Request.__init__	web2py.gluon.globals.Request-class.html#__init__
+web2py.gluon.storage.Storage.__setattr__	web2py.gluon.storage.Storage-class.html#__setattr__
+web2py.gluon.storage.Storage.__getattr__	web2py.gluon.storage.Storage-class.html#__getattr__
+web2py.gluon.storage.Storage.__getstate__	web2py.gluon.storage.Storage-class.html#__getstate__
+web2py.gluon.storage.Storage.__repr__	web2py.gluon.storage.Storage-class.html#__repr__
+web2py.gluon.globals.Request.compute_uuid	web2py.gluon.globals.Request-class.html#compute_uuid
+web2py.gluon.storage.Storage.__setstate__	web2py.gluon.storage.Storage-class.html#__setstate__
+web2py.gluon.storage.Storage.getlast	web2py.gluon.storage.Storage-class.html#getlast
+web2py.gluon.storage.Storage.__delattr__	web2py.gluon.storage.Storage-class.html#__delattr__
+web2py.gluon.globals.Request.user_agent	web2py.gluon.globals.Request-class.html#user_agent
+web2py.gluon.globals.Request.restful	web2py.gluon.globals.Request-class.html#restful
+web2py.gluon.storage.Storage.getfirst	web2py.gluon.storage.Storage-class.html#getfirst
+web2py.gluon.globals.Response	web2py.gluon.globals.Response-class.html
+web2py.gluon.globals.Response.render	web2py.gluon.globals.Response-class.html#render
+web2py.gluon.storage.Storage.getlist	web2py.gluon.storage.Storage-class.html#getlist
+web2py.gluon.globals.Response.download	web2py.gluon.globals.Response-class.html#download
+web2py.gluon.globals.Response.__init__	web2py.gluon.globals.Response-class.html#__init__
+web2py.gluon.storage.Storage.__setattr__	web2py.gluon.storage.Storage-class.html#__setattr__
+web2py.gluon.globals.Response.stream	web2py.gluon.globals.Response-class.html#stream
+web2py.gluon.storage.Storage.__getattr__	web2py.gluon.storage.Storage-class.html#__getattr__
+web2py.gluon.globals.Response.write	web2py.gluon.globals.Response-class.html#write
+web2py.gluon.globals.Response.json	web2py.gluon.globals.Response-class.html#json
+web2py.gluon.storage.Storage.__getstate__	web2py.gluon.storage.Storage-class.html#__getstate__
+web2py.gluon.globals.Response.xmlrpc	web2py.gluon.globals.Response-class.html#xmlrpc
+web2py.gluon.storage.Storage.__setstate__	web2py.gluon.storage.Storage-class.html#__setstate__
+web2py.gluon.globals.Response.toolbar	web2py.gluon.globals.Response-class.html#toolbar
+web2py.gluon.storage.Storage.getlast	web2py.gluon.storage.Storage-class.html#getlast
+web2py.gluon.storage.Storage.__delattr__	web2py.gluon.storage.Storage-class.html#__delattr__
+web2py.gluon.storage.Storage.__repr__	web2py.gluon.storage.Storage-class.html#__repr__
+web2py.gluon.storage.Storage.getfirst	web2py.gluon.storage.Storage-class.html#getfirst
+web2py.gluon.globals.Session	web2py.gluon.globals.Session-class.html
+web2py.gluon.globals.Session.forget	web2py.gluon.globals.Session-class.html#forget
+web2py.gluon.storage.Storage.getlist	web2py.gluon.storage.Storage-class.html#getlist
+web2py.gluon.globals.Session.is_new	web2py.gluon.globals.Session-class.html#is_new
+web2py.gluon.globals.Session.connect	web2py.gluon.globals.Session-class.html#connect
+web2py.gluon.globals.Session._try_store_in_db	web2py.gluon.globals.Session-class.html#_try_store_in_db
+web2py.gluon.globals.Session.secure	web2py.gluon.globals.Session-class.html#secure
+web2py.gluon.storage.Storage.__setattr__	web2py.gluon.storage.Storage-class.html#__setattr__
+web2py.gluon.storage.Storage.__getattr__	web2py.gluon.storage.Storage-class.html#__getattr__
+web2py.gluon.storage.Storage.__getstate__	web2py.gluon.storage.Storage-class.html#__getstate__
+web2py.gluon.globals.Session._close	web2py.gluon.globals.Session-class.html#_close
+web2py.gluon.storage.Storage.__setstate__	web2py.gluon.storage.Storage-class.html#__setstate__
+web2py.gluon.globals.Session._unlock	web2py.gluon.globals.Session-class.html#_unlock
+web2py.gluon.globals.Session._try_store_on_disk	web2py.gluon.globals.Session-class.html#_try_store_on_disk
+web2py.gluon.storage.Storage.getlast	web2py.gluon.storage.Storage-class.html#getlast
+web2py.gluon.storage.Storage.__delattr__	web2py.gluon.storage.Storage-class.html#__delattr__
+web2py.gluon.storage.Storage.__repr__	web2py.gluon.storage.Storage-class.html#__repr__
+web2py.gluon.globals.Session.is_expired	web2py.gluon.globals.Session-class.html#is_expired
+web2py.gluon.storage.Storage.getfirst	web2py.gluon.storage.Storage-class.html#getfirst
+web2py.gluon.highlight.Highlighter	web2py.gluon.highlight.Highlighter-class.html
+web2py.gluon.highlight.Highlighter.python_tokenizer	web2py.gluon.highlight.Highlighter-class.html#python_tokenizer
+web2py.gluon.highlight.Highlighter.c_tokenizer	web2py.gluon.highlight.Highlighter-class.html#c_tokenizer
+web2py.gluon.highlight.Highlighter.html_tokenizer	web2py.gluon.highlight.Highlighter-class.html#html_tokenizer
+web2py.gluon.highlight.Highlighter.all_styles	web2py.gluon.highlight.Highlighter-class.html#all_styles
+web2py.gluon.highlight.Highlighter.change_style	web2py.gluon.highlight.Highlighter-class.html#change_style
+web2py.gluon.highlight.Highlighter.highlight	web2py.gluon.highlight.Highlighter-class.html#highlight
+web2py.gluon.highlight.Highlighter.__init__	web2py.gluon.highlight.Highlighter-class.html#__init__
+web2py.gluon.html.A	web2py.gluon.html.A-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.A.tag	web2py.gluon.html.A-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.A.xml	web2py.gluon.html.A-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.B	web2py.gluon.html.B-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.B.tag	web2py.gluon.html.B-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.BEAUTIFY	web2py.gluon.html.BEAUTIFY-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.BEAUTIFY.tag	web2py.gluon.html.BEAUTIFY-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.BEAUTIFY.__init__	web2py.gluon.html.BEAUTIFY-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.BEAUTIFY.no_underscore	web2py.gluon.html.BEAUTIFY-class.html#no_underscore
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.BODY	web2py.gluon.html.BODY-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.BODY.tag	web2py.gluon.html.BODY-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.BR	web2py.gluon.html.BR-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.BR.tag	web2py.gluon.html.BR-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.BUTTON	web2py.gluon.html.BUTTON-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.BUTTON.tag	web2py.gluon.html.BUTTON-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.CAT	web2py.gluon.html.CAT-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.CAT.tag	web2py.gluon.html.CAT-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.CENTER	web2py.gluon.html.CENTER-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.CENTER.tag	web2py.gluon.html.CENTER-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.CODE	web2py.gluon.html.CODE-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.DIV.tag	web2py.gluon.html.DIV-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.CODE.xml	web2py.gluon.html.CODE-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.COL	web2py.gluon.html.COL-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.COL.tag	web2py.gluon.html.COL-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.COLGROUP	web2py.gluon.html.COLGROUP-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.COLGROUP.tag	web2py.gluon.html.COLGROUP-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.DIV	web2py.gluon.html.DIV-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.DIV.tag	web2py.gluon.html.DIV-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.EM	web2py.gluon.html.EM-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.EM.tag	web2py.gluon.html.EM-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.EMBED	web2py.gluon.html.EMBED-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.EMBED.tag	web2py.gluon.html.EMBED-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.FIELDSET	web2py.gluon.html.FIELDSET-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.FIELDSET.tag	web2py.gluon.html.FIELDSET-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.FORM	web2py.gluon.html.FORM-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.FORM.process	web2py.gluon.html.FORM-class.html#process
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.FORM.tag	web2py.gluon.html.FORM-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.FORM.xml	web2py.gluon.html.FORM-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.FORM.__init__	web2py.gluon.html.FORM-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.FORM._postprocessing	web2py.gluon.html.FORM-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.FORM.validate	web2py.gluon.html.FORM-class.html#validate
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.FORM.accepts	web2py.gluon.html.FORM-class.html#accepts
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.FORM.hidden_fields	web2py.gluon.html.FORM-class.html#hidden_fields
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.H1	web2py.gluon.html.H1-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.H1.tag	web2py.gluon.html.H1-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.H2	web2py.gluon.html.H2-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.H2.tag	web2py.gluon.html.H2-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.H3	web2py.gluon.html.H3-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.H3.tag	web2py.gluon.html.H3-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.H4	web2py.gluon.html.H4-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.H4.tag	web2py.gluon.html.H4-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.H5	web2py.gluon.html.H5-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.H5.tag	web2py.gluon.html.H5-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.H6	web2py.gluon.html.H6-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.H6.tag	web2py.gluon.html.H6-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.HEAD	web2py.gluon.html.HEAD-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.HEAD.tag	web2py.gluon.html.HEAD-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.HR	web2py.gluon.html.HR-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.HR.tag	web2py.gluon.html.HR-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.HTML	web2py.gluon.html.HTML-class.html
+web2py.gluon.html.HTML.frameset	web2py.gluon.html.HTML-class.html#frameset
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.HTML.tag	web2py.gluon.html.HTML-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.HTML.xml	web2py.gluon.html.HTML-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.HTML.strict	web2py.gluon.html.HTML-class.html#strict
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.HTML.html5	web2py.gluon.html.HTML-class.html#html5
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.HTML.transitional	web2py.gluon.html.HTML-class.html#transitional
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.I	web2py.gluon.html.I-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.I.tag	web2py.gluon.html.I-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.IFRAME	web2py.gluon.html.IFRAME-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.IFRAME.tag	web2py.gluon.html.IFRAME-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.IMG	web2py.gluon.html.IMG-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.IMG.tag	web2py.gluon.html.IMG-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.INPUT	web2py.gluon.html.INPUT-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.INPUT._validate	web2py.gluon.html.INPUT-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.INPUT.tag	web2py.gluon.html.INPUT-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.INPUT.xml	web2py.gluon.html.INPUT-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.INPUT._postprocessing	web2py.gluon.html.INPUT-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.LABEL	web2py.gluon.html.LABEL-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.LABEL.tag	web2py.gluon.html.LABEL-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.LEGEND	web2py.gluon.html.LEGEND-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.LEGEND.tag	web2py.gluon.html.LEGEND-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.LI	web2py.gluon.html.LI-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.LI.tag	web2py.gluon.html.LI-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.LINK	web2py.gluon.html.LINK-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.LINK.tag	web2py.gluon.html.LINK-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.MARKMIN	web2py.gluon.html.MARKMIN-class.html
+web2py.gluon.html.MARKMIN.xml	web2py.gluon.html.MARKMIN-class.html#xml
+web2py.gluon.html.MARKMIN.elements	web2py.gluon.html.MARKMIN-class.html#elements
+web2py.gluon.html.MARKMIN.__str__	web2py.gluon.html.MARKMIN-class.html#__str__
+web2py.gluon.html.MARKMIN.flatten	web2py.gluon.html.MARKMIN-class.html#flatten
+web2py.gluon.html.MARKMIN.__init__	web2py.gluon.html.MARKMIN-class.html#__init__
+web2py.gluon.html.MENU	web2py.gluon.html.MENU-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.MENU.serialize	web2py.gluon.html.MENU-class.html#serialize
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.MENU.tag	web2py.gluon.html.MENU-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.MENU.xml	web2py.gluon.html.MENU-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.MENU.__init__	web2py.gluon.html.MENU-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.META	web2py.gluon.html.META-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.META.tag	web2py.gluon.html.META-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.OBJECT	web2py.gluon.html.OBJECT-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.OBJECT.tag	web2py.gluon.html.OBJECT-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.OL	web2py.gluon.html.OL-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.OL.tag	web2py.gluon.html.OL-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.UL._fixup	web2py.gluon.html.UL-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.OPTGROUP	web2py.gluon.html.OPTGROUP-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.OPTGROUP.tag	web2py.gluon.html.OPTGROUP-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.OPTGROUP._fixup	web2py.gluon.html.OPTGROUP-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.OPTION	web2py.gluon.html.OPTION-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.OPTION.tag	web2py.gluon.html.OPTION-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.OPTION._fixup	web2py.gluon.html.OPTION-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.P	web2py.gluon.html.P-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.P.tag	web2py.gluon.html.P-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.P.xml	web2py.gluon.html.P-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.PRE	web2py.gluon.html.PRE-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.PRE.tag	web2py.gluon.html.PRE-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.SCRIPT	web2py.gluon.html.SCRIPT-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.SCRIPT.tag	web2py.gluon.html.SCRIPT-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.SCRIPT.xml	web2py.gluon.html.SCRIPT-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.SELECT	web2py.gluon.html.SELECT-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.INPUT._validate	web2py.gluon.html.INPUT-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.SELECT.tag	web2py.gluon.html.SELECT-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.SELECT._fixup	web2py.gluon.html.SELECT-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.INPUT.xml	web2py.gluon.html.INPUT-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.SELECT._postprocessing	web2py.gluon.html.SELECT-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.SPAN	web2py.gluon.html.SPAN-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.SPAN.tag	web2py.gluon.html.SPAN-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.STYLE	web2py.gluon.html.STYLE-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.STYLE.tag	web2py.gluon.html.STYLE-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.STYLE.xml	web2py.gluon.html.STYLE-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.TABLE	web2py.gluon.html.TABLE-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.TABLE.tag	web2py.gluon.html.TABLE-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.TABLE._fixup	web2py.gluon.html.TABLE-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.TBODY	web2py.gluon.html.TBODY-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.TBODY.tag	web2py.gluon.html.TBODY-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.TBODY._fixup	web2py.gluon.html.TBODY-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.TD	web2py.gluon.html.TD-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.TD.tag	web2py.gluon.html.TD-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.TEXTAREA	web2py.gluon.html.TEXTAREA-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.INPUT._validate	web2py.gluon.html.INPUT-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.TEXTAREA.tag	web2py.gluon.html.TEXTAREA-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.INPUT.xml	web2py.gluon.html.INPUT-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.TEXTAREA._postprocessing	web2py.gluon.html.TEXTAREA-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.TFOOT	web2py.gluon.html.TFOOT-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.TFOOT.tag	web2py.gluon.html.TFOOT-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.TFOOT._fixup	web2py.gluon.html.TFOOT-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.TH	web2py.gluon.html.TH-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.TH.tag	web2py.gluon.html.TH-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.THEAD	web2py.gluon.html.THEAD-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.THEAD.tag	web2py.gluon.html.THEAD-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.THEAD._fixup	web2py.gluon.html.THEAD-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.TITLE	web2py.gluon.html.TITLE-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.TITLE.tag	web2py.gluon.html.TITLE-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.TR	web2py.gluon.html.TR-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.TR.tag	web2py.gluon.html.TR-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.TR._fixup	web2py.gluon.html.TR-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.TT	web2py.gluon.html.TT-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.TT.tag	web2py.gluon.html.TT-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.UL	web2py.gluon.html.UL-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.UL.tag	web2py.gluon.html.UL-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.UL._fixup	web2py.gluon.html.UL-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.XHTML	web2py.gluon.html.XHTML-class.html
+web2py.gluon.html.XHTML.frameset	web2py.gluon.html.XHTML-class.html#frameset
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.XHTML.tag	web2py.gluon.html.XHTML-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.XHTML.xml	web2py.gluon.html.XHTML-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.XHTML.strict	web2py.gluon.html.XHTML-class.html#strict
+web2py.gluon.html.DIV.__init__	web2py.gluon.html.DIV-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.XHTML.xmlns	web2py.gluon.html.XHTML-class.html#xmlns
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.XHTML.transitional	web2py.gluon.html.XHTML-class.html#transitional
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.html.XML	web2py.gluon.html.XML-class.html
+web2py.gluon.html.XML.__getslice__	web2py.gluon.html.XML-class.html#__getslice__
+web2py.gluon.html.XML.__str__	web2py.gluon.html.XML-class.html#__str__
+web2py.gluon.html.XML.__radd__	web2py.gluon.html.XML-class.html#__radd__
+web2py.gluon.html.XML.flatten	web2py.gluon.html.XML-class.html#flatten
+web2py.gluon.html.XML.__init__	web2py.gluon.html.XML-class.html#__init__
+web2py.gluon.html.XML.xml	web2py.gluon.html.XML-class.html#xml
+web2py.gluon.html.XML.__getattr__	web2py.gluon.html.XML-class.html#__getattr__
+web2py.gluon.html.XML.__cmp__	web2py.gluon.html.XML-class.html#__cmp__
+web2py.gluon.html.XML.__len__	web2py.gluon.html.XML-class.html#__len__
+web2py.gluon.html.XML.elements	web2py.gluon.html.XML-class.html#elements
+web2py.gluon.html.XML.__getitem__	web2py.gluon.html.XML-class.html#__getitem__
+web2py.gluon.html.XML.__iter__	web2py.gluon.html.XML-class.html#__iter__
+web2py.gluon.html.XML.__add__	web2py.gluon.html.XML-class.html#__add__
+web2py.gluon.html.XML.__hash__	web2py.gluon.html.XML-class.html#__hash__
+web2py.gluon.html.XmlComponent	web2py.gluon.html.XmlComponent-class.html
+web2py.gluon.html.XmlComponent.xml	web2py.gluon.html.XmlComponent-class.html#xml
+web2py.gluon.html.__TAG__	web2py.gluon.html.__TAG__-class.html
+web2py.gluon.html.XmlComponent.xml	web2py.gluon.html.XmlComponent-class.html#xml
+web2py.gluon.html.__TAG__.__getitem__	web2py.gluon.html.__TAG__-class.html#__getitem__
+web2py.gluon.html.__TAG__.__getattr__	web2py.gluon.html.__TAG__-class.html#__getattr__
+web2py.gluon.html.__TAG__.__call__	web2py.gluon.html.__TAG__-class.html#__call__
+web2py.gluon.html.web2pyHTMLParser	web2py.gluon.html.web2pyHTMLParser-class.html
+web2py.gluon.html.web2pyHTMLParser.handle_entityref	web2py.gluon.html.web2pyHTMLParser-class.html#handle_entityref
+web2py.gluon.html.web2pyHTMLParser.handle_starttag	web2py.gluon.html.web2pyHTMLParser-class.html#handle_starttag
+web2py.gluon.html.web2pyHTMLParser.__init__	web2py.gluon.html.web2pyHTMLParser-class.html#__init__
+web2py.gluon.html.web2pyHTMLParser.handle_endtag	web2py.gluon.html.web2pyHTMLParser-class.html#handle_endtag
+web2py.gluon.html.web2pyHTMLParser.handle_charref	web2py.gluon.html.web2pyHTMLParser-class.html#handle_charref
+web2py.gluon.html.web2pyHTMLParser.handle_data	web2py.gluon.html.web2pyHTMLParser-class.html#handle_data
+web2py.gluon.http.HTTP	web2py.gluon.http.HTTP-class.html
+web2py.gluon.http.HTTP.__str__	web2py.gluon.http.HTTP-class.html#__str__
+web2py.gluon.http.HTTP.to	web2py.gluon.http.HTTP-class.html#to
+web2py.gluon.http.HTTP.message	web2py.gluon.http.HTTP-class.html#message
+web2py.gluon.http.HTTP.__init__	web2py.gluon.http.HTTP-class.html#__init__
+web2py.gluon.languages.lazyT	web2py.gluon.languages.lazyT-class.html
+web2py.gluon.languages.lazyT.__getslice__	web2py.gluon.languages.lazyT-class.html#__getslice__
+web2py.gluon.languages.lazyT.__str__	web2py.gluon.languages.lazyT-class.html#__str__
+web2py.gluon.languages.lazyT.__radd__	web2py.gluon.languages.lazyT-class.html#__radd__
+web2py.gluon.languages.lazyT.__init__	web2py.gluon.languages.lazyT-class.html#__init__
+web2py.gluon.languages.lazyT.xml	web2py.gluon.languages.lazyT-class.html#xml
+web2py.gluon.languages.lazyT.__getattr__	web2py.gluon.languages.lazyT-class.html#__getattr__
+web2py.gluon.languages.lazyT.__cmp__	web2py.gluon.languages.lazyT-class.html#__cmp__
+web2py.gluon.languages.lazyT.decode	web2py.gluon.languages.lazyT-class.html#decode
+web2py.gluon.languages.lazyT.encode	web2py.gluon.languages.lazyT-class.html#encode
+web2py.gluon.languages.lazyT.__len__	web2py.gluon.languages.lazyT-class.html#__len__
+web2py.gluon.languages.lazyT.__ne__	web2py.gluon.languages.lazyT-class.html#__ne__
+web2py.gluon.languages.lazyT.__getitem__	web2py.gluon.languages.lazyT-class.html#__getitem__
+web2py.gluon.languages.lazyT.read	web2py.gluon.languages.lazyT-class.html#read
+web2py.gluon.languages.lazyT.__iter__	web2py.gluon.languages.lazyT-class.html#__iter__
+web2py.gluon.languages.lazyT.T	web2py.gluon.languages.lazyT-class.html#T
+web2py.gluon.languages.lazyT.__add__	web2py.gluon.languages.lazyT-class.html#__add__
+web2py.gluon.languages.lazyT.__eq__	web2py.gluon.languages.lazyT-class.html#__eq__
+web2py.gluon.languages.lazyT.__mod__	web2py.gluon.languages.lazyT-class.html#__mod__
+web2py.gluon.languages.lazyT.m	web2py.gluon.languages.lazyT-class.html#m
+web2py.gluon.languages.lazyT.s	web2py.gluon.languages.lazyT-class.html#s
+web2py.gluon.languages.lazyT.__repr__	web2py.gluon.languages.lazyT-class.html#__repr__
+web2py.gluon.languages.lazyT.__hash__	web2py.gluon.languages.lazyT-class.html#__hash__
+web2py.gluon.languages.translator	web2py.gluon.languages.translator-class.html
+web2py.gluon.languages.translator.force	web2py.gluon.languages.translator-class.html#force
+web2py.gluon.languages.translator.get_possible_languages	web2py.gluon.languages.translator-class.html#get_possible_languages
+web2py.gluon.languages.translator.__call__	web2py.gluon.languages.translator-class.html#__call__
+web2py.gluon.languages.translator.translate	web2py.gluon.languages.translator-class.html#translate
+web2py.gluon.languages.translator.__init__	web2py.gluon.languages.translator-class.html#__init__
+web2py.gluon.languages.translator.set_current_languages	web2py.gluon.languages.translator-class.html#set_current_languages
+web2py.gluon.main.HttpServer	web2py.gluon.main.HttpServer-class.html
+web2py.gluon.main.HttpServer.stop	web2py.gluon.main.HttpServer-class.html#stop
+web2py.gluon.main.HttpServer.start	web2py.gluon.main.HttpServer-class.html#start
+web2py.gluon.main.HttpServer.__init__	web2py.gluon.main.HttpServer-class.html#__init__
+web2py.gluon.newcron.Token	web2py.gluon.newcron.Token-class.html
+web2py.gluon.newcron.Token.acquire	web2py.gluon.newcron.Token-class.html#acquire
+web2py.gluon.newcron.Token.release	web2py.gluon.newcron.Token-class.html#release
+web2py.gluon.newcron.Token.__init__	web2py.gluon.newcron.Token-class.html#__init__
+web2py.gluon.newcron.cronlauncher	web2py.gluon.newcron.cronlauncher-class.html
+web2py.gluon.newcron.cronlauncher.run	web2py.gluon.newcron.cronlauncher-class.html#run
+web2py.gluon.newcron.cronlauncher.__init__	web2py.gluon.newcron.cronlauncher-class.html#__init__
+web2py.gluon.newcron.extcron	web2py.gluon.newcron.extcron-class.html
+web2py.gluon.newcron.extcron.run	web2py.gluon.newcron.extcron-class.html#run
+web2py.gluon.newcron.extcron.__init__	web2py.gluon.newcron.extcron-class.html#__init__
+web2py.gluon.newcron.hardcron	web2py.gluon.newcron.hardcron-class.html
+web2py.gluon.newcron.hardcron.run	web2py.gluon.newcron.hardcron-class.html#run
+web2py.gluon.newcron.hardcron.__init__	web2py.gluon.newcron.hardcron-class.html#__init__
+web2py.gluon.newcron.hardcron.launch	web2py.gluon.newcron.hardcron-class.html#launch
+web2py.gluon.newcron.softcron	web2py.gluon.newcron.softcron-class.html
+web2py.gluon.newcron.softcron.run	web2py.gluon.newcron.softcron-class.html#run
+web2py.gluon.newcron.softcron.__init__	web2py.gluon.newcron.softcron-class.html#__init__
+web2py.gluon.restricted.RestrictedError	web2py.gluon.restricted.RestrictedError-class.html
+web2py.gluon.restricted.RestrictedError.load	web2py.gluon.restricted.RestrictedError-class.html#load
+web2py.gluon.restricted.RestrictedError.log	web2py.gluon.restricted.RestrictedError-class.html#log
+web2py.gluon.restricted.RestrictedError.__init__	web2py.gluon.restricted.RestrictedError-class.html#__init__
+exceptions.Exception.__new__	exceptions.Exception-class.html#__new__
+web2py.gluon.restricted.TicketStorage	web2py.gluon.restricted.TicketStorage-class.html
+web2py.gluon.restricted.TicketStorage.load	web2py.gluon.restricted.TicketStorage-class.html#load
+web2py.gluon.storage.Storage.getlist	web2py.gluon.storage.Storage-class.html#getlist
+web2py.gluon.restricted.TicketStorage.__init__	web2py.gluon.restricted.TicketStorage-class.html#__init__
+web2py.gluon.storage.Storage.__setattr__	web2py.gluon.storage.Storage-class.html#__setattr__
+web2py.gluon.storage.Storage.__getattr__	web2py.gluon.storage.Storage-class.html#__getattr__
+web2py.gluon.storage.Storage.__getstate__	web2py.gluon.storage.Storage-class.html#__getstate__
+web2py.gluon.restricted.TicketStorage.store	web2py.gluon.restricted.TicketStorage-class.html#store
+web2py.gluon.storage.Storage.__setstate__	web2py.gluon.storage.Storage-class.html#__setstate__
+web2py.gluon.storage.Storage.getlast	web2py.gluon.storage.Storage-class.html#getlast
+web2py.gluon.restricted.TicketStorage._error_file	web2py.gluon.restricted.TicketStorage-class.html#_error_file
+web2py.gluon.storage.Storage.__delattr__	web2py.gluon.storage.Storage-class.html#__delattr__
+web2py.gluon.storage.Storage.__repr__	web2py.gluon.storage.Storage-class.html#__repr__
+web2py.gluon.restricted.TicketStorage._get_table	web2py.gluon.restricted.TicketStorage-class.html#_get_table
+web2py.gluon.restricted.TicketStorage._store_on_disk	web2py.gluon.restricted.TicketStorage-class.html#_store_on_disk
+web2py.gluon.restricted.TicketStorage._store_in_db	web2py.gluon.restricted.TicketStorage-class.html#_store_in_db
+web2py.gluon.storage.Storage.getfirst	web2py.gluon.storage.Storage-class.html#getfirst
+web2py.gluon.rewrite.MapUrlIn	web2py.gluon.rewrite.MapUrlIn-class.html
+web2py.gluon.rewrite.MapUrlIn.map_controller	web2py.gluon.rewrite.MapUrlIn-class.html#map_controller
+web2py.gluon.rewrite.MapUrlIn.validate_args	web2py.gluon.rewrite.MapUrlIn-class.html#validate_args
+web2py.gluon.rewrite.MapUrlIn.arg0	web2py.gluon.rewrite.MapUrlIn-class.html#arg0
+web2py.gluon.rewrite.MapUrlIn.map_static	web2py.gluon.rewrite.MapUrlIn-class.html#map_static
+web2py.gluon.rewrite.MapUrlIn.map_language	web2py.gluon.rewrite.MapUrlIn-class.html#map_language
+web2py.gluon.rewrite.MapUrlIn.map_app	web2py.gluon.rewrite.MapUrlIn-class.html#map_app
+web2py.gluon.rewrite.MapUrlIn.__init__	web2py.gluon.rewrite.MapUrlIn-class.html#__init__
+web2py.gluon.rewrite.MapUrlIn.map_prefix	web2py.gluon.rewrite.MapUrlIn-class.html#map_prefix
+web2py.gluon.rewrite.MapUrlIn.update_request	web2py.gluon.rewrite.MapUrlIn-class.html#update_request
+web2py.gluon.rewrite.MapUrlIn.map_function	web2py.gluon.rewrite.MapUrlIn-class.html#map_function
+web2py.gluon.rewrite.MapUrlIn.map_root_static	web2py.gluon.rewrite.MapUrlIn-class.html#map_root_static
+web2py.gluon.rewrite.MapUrlIn.harg0	web2py.gluon.rewrite.MapUrlIn-class.html#harg0
+web2py.gluon.rewrite.MapUrlIn.pop_arg_if	web2py.gluon.rewrite.MapUrlIn-class.html#pop_arg_if
+web2py.gluon.rewrite.MapUrlOut	web2py.gluon.rewrite.MapUrlOut-class.html
+web2py.gluon.rewrite.MapUrlOut.acf	web2py.gluon.rewrite.MapUrlOut-class.html#acf
+web2py.gluon.rewrite.MapUrlOut.omit_lang	web2py.gluon.rewrite.MapUrlOut-class.html#omit_lang
+web2py.gluon.rewrite.MapUrlOut.build_acf	web2py.gluon.rewrite.MapUrlOut-class.html#build_acf
+web2py.gluon.rewrite.MapUrlOut.omit_acf	web2py.gluon.rewrite.MapUrlOut-class.html#omit_acf
+web2py.gluon.rewrite.MapUrlOut.__init__	web2py.gluon.rewrite.MapUrlOut-class.html#__init__
+web2py.gluon.rocket.BadRequest	web2py.gluon.rocket.BadRequest-class.html
+exceptions.Exception.__init__	exceptions.Exception-class.html#__init__
+exceptions.Exception.__new__	exceptions.Exception-class.html#__new__
+web2py.gluon.rocket.ChunkedReader	web2py.gluon.rocket.ChunkedReader-class.html
+web2py.gluon.rocket.ChunkedReader._read_header	web2py.gluon.rocket.ChunkedReader-class.html#_read_header
+web2py.gluon.rocket.ChunkedReader.read	web2py.gluon.rocket.ChunkedReader-class.html#read
+web2py.gluon.rocket.ChunkedReader.readlines	web2py.gluon.rocket.ChunkedReader-class.html#readlines
+web2py.gluon.rocket.ChunkedReader.readline	web2py.gluon.rocket.ChunkedReader-class.html#readline
+web2py.gluon.rocket.ChunkedReader.__init__	web2py.gluon.rocket.ChunkedReader-class.html#__init__
+web2py.gluon.rocket.Connection	web2py.gluon.rocket.Connection-class.html
+web2py.gluon.rocket.Connection.secure	web2py.gluon.rocket.Connection-class.html#secure
+web2py.gluon.rocket.Connection.shutdown	web2py.gluon.rocket.Connection-class.html#shutdown
+web2py.gluon.rocket.Connection.close	web2py.gluon.rocket.Connection-class.html#close
+web2py.gluon.rocket.Connection.__init__	web2py.gluon.rocket.Connection-class.html#__init__
+web2py.gluon.rocket.Connection.makefile	web2py.gluon.rocket.Connection-class.html#makefile
+web2py.gluon.rocket.Connection.server_port	web2py.gluon.rocket.Connection-class.html#server_port
+web2py.gluon.rocket.Connection.start_time	web2py.gluon.rocket.Connection-class.html#start_time
+web2py.gluon.rocket.Connection.ssl	web2py.gluon.rocket.Connection-class.html#ssl
+web2py.gluon.rocket.Connection.client_port	web2py.gluon.rocket.Connection-class.html#client_port
+web2py.gluon.rocket.Connection.setblocking	web2py.gluon.rocket.Connection-class.html#setblocking
+web2py.gluon.rocket.Connection.fileno	web2py.gluon.rocket.Connection-class.html#fileno
+web2py.gluon.rocket.Connection.socket	web2py.gluon.rocket.Connection-class.html#socket
+web2py.gluon.rocket.Connection.client_addr	web2py.gluon.rocket.Connection-class.html#client_addr
+web2py.gluon.rocket.Connection.sendall	web2py.gluon.rocket.Connection-class.html#sendall
+web2py.gluon.rocket.FileWrapper	web2py.gluon.rocket.FileWrapper-class.html
+web2py.gluon.rocket.FileWrapper.__iter__	web2py.gluon.rocket.FileWrapper-class.html#__iter__
+web2py.gluon.rocket.FileWrapper.__init__	web2py.gluon.rocket.FileWrapper-class.html#__init__
+web2py.gluon.rocket.FileWrapper.__getitem__	web2py.gluon.rocket.FileWrapper-class.html#__getitem__
+web2py.gluon.rocket.FileWrapper.next	web2py.gluon.rocket.FileWrapper-class.html#next
+web2py.gluon.rocket.Headers	web2py.gluon.rocket.Headers-class.html
+web2py.gluon.rocket.Headers.__delitem__	web2py.gluon.rocket.Headers-class.html#__delitem__
+web2py.gluon.rocket.Headers.setdefault	web2py.gluon.rocket.Headers-class.html#setdefault
+web2py.gluon.rocket.Headers.__getitem__	web2py.gluon.rocket.Headers-class.html#__getitem__
+web2py.gluon.rocket.Headers.__contains__	web2py.gluon.rocket.Headers-class.html#__contains__
+web2py.gluon.rocket.Headers.keys	web2py.gluon.rocket.Headers-class.html#keys
+web2py.gluon.rocket.Headers.items	web2py.gluon.rocket.Headers-class.html#items
+web2py.gluon.rocket.Headers.__str__	web2py.gluon.rocket.Headers-class.html#__str__
+web2py.gluon.rocket.Headers.get_all	web2py.gluon.rocket.Headers-class.html#get_all
+web2py.gluon.rocket.Headers.add_header	web2py.gluon.rocket.Headers-class.html#add_header
+web2py.gluon.rocket.Headers.__setitem__	web2py.gluon.rocket.Headers-class.html#__setitem__
+web2py.gluon.rocket.Headers.has_key	web2py.gluon.rocket.Headers-class.html#has_key
+web2py.gluon.rocket.Headers.values	web2py.gluon.rocket.Headers-class.html#values
+web2py.gluon.rocket.Headers.__len__	web2py.gluon.rocket.Headers-class.html#__len__
+web2py.gluon.rocket.Headers.get	web2py.gluon.rocket.Headers-class.html#get
+web2py.gluon.rocket.Headers.__init__	web2py.gluon.rocket.Headers-class.html#__init__
+web2py.gluon.rocket.Headers.__repr__	web2py.gluon.rocket.Headers-class.html#__repr__
+web2py.gluon.rocket.Listener	web2py.gluon.rocket.Listener-class.html
+web2py.gluon.rocket.Listener.run	web2py.gluon.rocket.Listener-class.html#run
+web2py.gluon.rocket.Listener.__init__	web2py.gluon.rocket.Listener-class.html#__init__
+web2py.gluon.rocket.Listener.wrap_socket	web2py.gluon.rocket.Listener-class.html#wrap_socket
+web2py.gluon.rocket.Monitor	web2py.gluon.rocket.Monitor-class.html
+web2py.gluon.rocket.Monitor.run	web2py.gluon.rocket.Monitor-class.html#run
+web2py.gluon.rocket.Monitor.__init__	web2py.gluon.rocket.Monitor-class.html#__init__
+web2py.gluon.rocket.Monitor.stop	web2py.gluon.rocket.Monitor-class.html#stop
+web2py.gluon.rocket.NullHandler	web2py.gluon.rocket.NullHandler-class.html
+web2py.gluon.rocket.NullHandler.emit	web2py.gluon.rocket.NullHandler-class.html#emit
+web2py.gluon.rocket.Rocket	web2py.gluon.rocket.Rocket-class.html
+web2py.gluon.rocket.Rocket._sigterm	web2py.gluon.rocket.Rocket-class.html#_sigterm
+web2py.gluon.rocket.Rocket.stop	web2py.gluon.rocket.Rocket-class.html#stop
+web2py.gluon.rocket.Rocket._sighup	web2py.gluon.rocket.Rocket-class.html#_sighup
+web2py.gluon.rocket.Rocket.start	web2py.gluon.rocket.Rocket-class.html#start
+web2py.gluon.rocket.Rocket.__init__	web2py.gluon.rocket.Rocket-class.html#__init__
+web2py.gluon.rocket.Rocket.restart	web2py.gluon.rocket.Rocket-class.html#restart
+web2py.gluon.rocket.SSLError	web2py.gluon.rocket.SSLError-class.html
+exceptions.Exception.__init__	exceptions.Exception-class.html#__init__
+exceptions.Exception.__new__	exceptions.Exception-class.html#__new__
+web2py.gluon.rocket.SocketClosed	web2py.gluon.rocket.SocketClosed-class.html
+exceptions.Exception.__init__	exceptions.Exception-class.html#__init__
+exceptions.Exception.__new__	exceptions.Exception-class.html#__new__
+web2py.gluon.rocket.SocketTimeout	web2py.gluon.rocket.SocketTimeout-class.html
+exceptions.Exception.__init__	exceptions.Exception-class.html#__init__
+exceptions.Exception.__new__	exceptions.Exception-class.html#__new__
+web2py.gluon.rocket.ThreadPool	web2py.gluon.rocket.ThreadPool-class.html
+web2py.gluon.rocket.ThreadPool.stop	web2py.gluon.rocket.ThreadPool-class.html#stop
+web2py.gluon.rocket.ThreadPool.grow	web2py.gluon.rocket.ThreadPool-class.html#grow
+web2py.gluon.rocket.ThreadPool.start	web2py.gluon.rocket.ThreadPool-class.html#start
+web2py.gluon.rocket.ThreadPool.dynamic_resize	web2py.gluon.rocket.ThreadPool-class.html#dynamic_resize
+web2py.gluon.rocket.ThreadPool.bring_out_your_dead	web2py.gluon.rocket.ThreadPool-class.html#bring_out_your_dead
+web2py.gluon.rocket.ThreadPool.shrink	web2py.gluon.rocket.ThreadPool-class.html#shrink
+web2py.gluon.rocket.ThreadPool.__init__	web2py.gluon.rocket.ThreadPool-class.html#__init__
+web2py.gluon.rocket.WSGIWorker	web2py.gluon.rocket.WSGIWorker-class.html
+web2py.gluon.rocket.WSGIWorker.start_response	web2py.gluon.rocket.WSGIWorker-class.html#start_response
+web2py.gluon.rocket.Worker.read_request_line	web2py.gluon.rocket.Worker-class.html#read_request_line
+web2py.gluon.rocket.WSGIWorker.run_app	web2py.gluon.rocket.WSGIWorker-class.html#run_app
+web2py.gluon.rocket.WSGIWorker.write_warning	web2py.gluon.rocket.WSGIWorker-class.html#write_warning
+web2py.gluon.rocket.WSGIWorker.__init__	web2py.gluon.rocket.WSGIWorker-class.html#__init__
+web2py.gluon.rocket.WSGIWorker.write	web2py.gluon.rocket.WSGIWorker-class.html#write
+web2py.gluon.rocket.Worker._read_request_line_jython	web2py.gluon.rocket.Worker-class.html#_read_request_line_jython
+web2py.gluon.rocket.Worker.send_response	web2py.gluon.rocket.Worker-class.html#send_response
+web2py.gluon.rocket.Worker.run	web2py.gluon.rocket.Worker-class.html#run
+web2py.gluon.rocket.WSGIWorker.build_environ	web2py.gluon.rocket.WSGIWorker-class.html#build_environ
+web2py.gluon.rocket.Worker._handleError	web2py.gluon.rocket.Worker-class.html#_handleError
+web2py.gluon.rocket.WSGIWorker.send_headers	web2py.gluon.rocket.WSGIWorker-class.html#send_headers
+web2py.gluon.rocket.Worker.kill	web2py.gluon.rocket.Worker-class.html#kill
+web2py.gluon.rocket.Worker.read_headers	web2py.gluon.rocket.Worker-class.html#read_headers
+web2py.gluon.rocket.Worker	web2py.gluon.rocket.Worker-class.html
+web2py.gluon.rocket.Worker.read_request_line	web2py.gluon.rocket.Worker-class.html#read_request_line
+web2py.gluon.rocket.Worker.run_app	web2py.gluon.rocket.Worker-class.html#run_app
+web2py.gluon.rocket.Worker.kill	web2py.gluon.rocket.Worker-class.html#kill
+web2py.gluon.rocket.Worker.__init__	web2py.gluon.rocket.Worker-class.html#__init__
+web2py.gluon.rocket.Worker._read_request_line_jython	web2py.gluon.rocket.Worker-class.html#_read_request_line_jython
+web2py.gluon.rocket.Worker.send_response	web2py.gluon.rocket.Worker-class.html#send_response
+web2py.gluon.rocket.Worker.run	web2py.gluon.rocket.Worker-class.html#run
+web2py.gluon.rocket.Worker._handleError	web2py.gluon.rocket.Worker-class.html#_handleError
+web2py.gluon.rocket.Worker.read_headers	web2py.gluon.rocket.Worker-class.html#read_headers
+web2py.gluon.sanitizer.XssCleaner	web2py.gluon.sanitizer.XssCleaner-class.html
+web2py.gluon.sanitizer.XssCleaner.xtags	web2py.gluon.sanitizer.XssCleaner-class.html#xtags
+web2py.gluon.sanitizer.XssCleaner.handle_data	web2py.gluon.sanitizer.XssCleaner-class.html#handle_data
+web2py.gluon.sanitizer.XssCleaner.handle_charref	web2py.gluon.sanitizer.XssCleaner-class.html#handle_charref
+web2py.gluon.sanitizer.XssCleaner.strip	web2py.gluon.sanitizer.XssCleaner-class.html#strip
+web2py.gluon.sanitizer.XssCleaner.unknown_starttag	web2py.gluon.sanitizer.XssCleaner-class.html#unknown_starttag
+web2py.gluon.sanitizer.XssCleaner.handle_entityref	web2py.gluon.sanitizer.XssCleaner-class.html#handle_entityref
+web2py.gluon.sanitizer.XssCleaner.handle_comment	web2py.gluon.sanitizer.XssCleaner-class.html#handle_comment
+web2py.gluon.sanitizer.XssCleaner.handle_starttag	web2py.gluon.sanitizer.XssCleaner-class.html#handle_starttag
+web2py.gluon.sanitizer.XssCleaner.__init__	web2py.gluon.sanitizer.XssCleaner-class.html#__init__
+web2py.gluon.sanitizer.XssCleaner.url_is_acceptable	web2py.gluon.sanitizer.XssCleaner-class.html#url_is_acceptable
+web2py.gluon.sanitizer.XssCleaner.handle_endtag	web2py.gluon.sanitizer.XssCleaner-class.html#handle_endtag
+web2py.gluon.sanitizer.XssCleaner.unknown_endtag	web2py.gluon.sanitizer.XssCleaner-class.html#unknown_endtag
+web2py.gluon.sqlhtml.AutocompleteWidget	web2py.gluon.sqlhtml.AutocompleteWidget-class.html
+web2py.gluon.sqlhtml.AutocompleteWidget.callback	web2py.gluon.sqlhtml.AutocompleteWidget-class.html#callback
+web2py.gluon.sqlhtml.AutocompleteWidget.__call__	web2py.gluon.sqlhtml.AutocompleteWidget-class.html#__call__
+web2py.gluon.sqlhtml.AutocompleteWidget.__init__	web2py.gluon.sqlhtml.AutocompleteWidget-class.html#__init__
+web2py.gluon.sqlhtml.BooleanWidget	web2py.gluon.sqlhtml.BooleanWidget-class.html
+web2py.gluon.sqlhtml.BooleanWidget.widget	web2py.gluon.sqlhtml.BooleanWidget-class.html#widget
+web2py.gluon.sqlhtml.FormWidget._attributes	web2py.gluon.sqlhtml.FormWidget-class.html#_attributes
+web2py.gluon.sqlhtml.CheckboxesWidget	web2py.gluon.sqlhtml.CheckboxesWidget-class.html
+web2py.gluon.sqlhtml.CheckboxesWidget.widget	web2py.gluon.sqlhtml.CheckboxesWidget-class.html#widget
+web2py.gluon.sqlhtml.FormWidget._attributes	web2py.gluon.sqlhtml.FormWidget-class.html#_attributes
+web2py.gluon.sqlhtml.OptionsWidget.has_options	web2py.gluon.sqlhtml.OptionsWidget-class.html#has_options
+web2py.gluon.sqlhtml.DateWidget	web2py.gluon.sqlhtml.DateWidget-class.html
+web2py.gluon.sqlhtml.StringWidget.widget	web2py.gluon.sqlhtml.StringWidget-class.html#widget
+web2py.gluon.sqlhtml.FormWidget._attributes	web2py.gluon.sqlhtml.FormWidget-class.html#_attributes
+web2py.gluon.sqlhtml.DatetimeWidget	web2py.gluon.sqlhtml.DatetimeWidget-class.html
+web2py.gluon.sqlhtml.StringWidget.widget	web2py.gluon.sqlhtml.StringWidget-class.html#widget
+web2py.gluon.sqlhtml.FormWidget._attributes	web2py.gluon.sqlhtml.FormWidget-class.html#_attributes
+web2py.gluon.sqlhtml.DecimalWidget	web2py.gluon.sqlhtml.DecimalWidget-class.html
+web2py.gluon.sqlhtml.StringWidget.widget	web2py.gluon.sqlhtml.StringWidget-class.html#widget
+web2py.gluon.sqlhtml.FormWidget._attributes	web2py.gluon.sqlhtml.FormWidget-class.html#_attributes
+web2py.gluon.sqlhtml.DoubleWidget	web2py.gluon.sqlhtml.DoubleWidget-class.html
+web2py.gluon.sqlhtml.StringWidget.widget	web2py.gluon.sqlhtml.StringWidget-class.html#widget
+web2py.gluon.sqlhtml.FormWidget._attributes	web2py.gluon.sqlhtml.FormWidget-class.html#_attributes
+web2py.gluon.sqlhtml.FormWidget	web2py.gluon.sqlhtml.FormWidget-class.html
+web2py.gluon.sqlhtml.FormWidget.widget	web2py.gluon.sqlhtml.FormWidget-class.html#widget
+web2py.gluon.sqlhtml.FormWidget._attributes	web2py.gluon.sqlhtml.FormWidget-class.html#_attributes
+web2py.gluon.sqlhtml.IntegerWidget	web2py.gluon.sqlhtml.IntegerWidget-class.html
+web2py.gluon.sqlhtml.StringWidget.widget	web2py.gluon.sqlhtml.StringWidget-class.html#widget
+web2py.gluon.sqlhtml.FormWidget._attributes	web2py.gluon.sqlhtml.FormWidget-class.html#_attributes
+web2py.gluon.sqlhtml.ListWidget	web2py.gluon.sqlhtml.ListWidget-class.html
+web2py.gluon.sqlhtml.ListWidget.widget	web2py.gluon.sqlhtml.ListWidget-class.html#widget
+web2py.gluon.sqlhtml.FormWidget._attributes	web2py.gluon.sqlhtml.FormWidget-class.html#_attributes
+web2py.gluon.sqlhtml.MultipleOptionsWidget	web2py.gluon.sqlhtml.MultipleOptionsWidget-class.html
+web2py.gluon.sqlhtml.MultipleOptionsWidget.widget	web2py.gluon.sqlhtml.MultipleOptionsWidget-class.html#widget
+web2py.gluon.sqlhtml.FormWidget._attributes	web2py.gluon.sqlhtml.FormWidget-class.html#_attributes
+web2py.gluon.sqlhtml.OptionsWidget.has_options	web2py.gluon.sqlhtml.OptionsWidget-class.html#has_options
+web2py.gluon.sqlhtml.OptionsWidget	web2py.gluon.sqlhtml.OptionsWidget-class.html
+web2py.gluon.sqlhtml.OptionsWidget.widget	web2py.gluon.sqlhtml.OptionsWidget-class.html#widget
+web2py.gluon.sqlhtml.FormWidget._attributes	web2py.gluon.sqlhtml.FormWidget-class.html#_attributes
+web2py.gluon.sqlhtml.OptionsWidget.has_options	web2py.gluon.sqlhtml.OptionsWidget-class.html#has_options
+web2py.gluon.sqlhtml.PasswordWidget	web2py.gluon.sqlhtml.PasswordWidget-class.html
+web2py.gluon.sqlhtml.PasswordWidget.widget	web2py.gluon.sqlhtml.PasswordWidget-class.html#widget
+web2py.gluon.sqlhtml.FormWidget._attributes	web2py.gluon.sqlhtml.FormWidget-class.html#_attributes
+web2py.gluon.sqlhtml.PasswordWidget.DEFAULT_PASSWORD_DISPLAY	web2py.gluon.sqlhtml.PasswordWidget-class.html#DEFAULT_PASSWORD_DISPLAY
+web2py.gluon.sqlhtml.RadioWidget	web2py.gluon.sqlhtml.RadioWidget-class.html
+web2py.gluon.sqlhtml.RadioWidget.widget	web2py.gluon.sqlhtml.RadioWidget-class.html#widget
+web2py.gluon.sqlhtml.FormWidget._attributes	web2py.gluon.sqlhtml.FormWidget-class.html#_attributes
+web2py.gluon.sqlhtml.OptionsWidget.has_options	web2py.gluon.sqlhtml.OptionsWidget-class.html#has_options
+web2py.gluon.sqlhtml.SQLFORM	web2py.gluon.sqlhtml.SQLFORM-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.FORM.process	web2py.gluon.html.FORM-class.html#process
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.FORM.tag	web2py.gluon.html.FORM-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.sqlhtml.SQLFORM.FIELDNAME_REQUEST_DELETE	web2py.gluon.sqlhtml.SQLFORM-class.html#FIELDNAME_REQUEST_DELETE
+web2py.gluon.html.DIV._fixup	web2py.gluon.html.DIV-class.html#_fixup
+web2py.gluon.sqlhtml.SQLFORM.createform	web2py.gluon.sqlhtml.SQLFORM-class.html#createform
+web2py.gluon.sqlhtml.SQLFORM.__init__	web2py.gluon.sqlhtml.SQLFORM-class.html#__init__
+web2py.gluon.html.FORM.xml	web2py.gluon.html.FORM-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.sqlhtml.SQLFORM.ID_LABEL_SUFFIX	web2py.gluon.sqlhtml.SQLFORM-class.html#ID_LABEL_SUFFIX
+web2py.gluon.sqlhtml.SQLFORM.factory	web2py.gluon.sqlhtml.SQLFORM-class.html#factory
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.sqlhtml.SQLFORM.ID_ROW_SUFFIX	web2py.gluon.sqlhtml.SQLFORM-class.html#ID_ROW_SUFFIX
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.sqlhtml.SQLFORM.widgets	web2py.gluon.sqlhtml.SQLFORM-class.html#widgets
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.sqlhtml.SQLFORM.FIELDKEY_DELETE_RECORD	web2py.gluon.sqlhtml.SQLFORM-class.html#FIELDKEY_DELETE_RECORD
+web2py.gluon.html.FORM._postprocessing	web2py.gluon.html.FORM-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.FORM.validate	web2py.gluon.html.FORM-class.html#validate
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.sqlhtml.SQLFORM.accepts	web2py.gluon.sqlhtml.SQLFORM-class.html#accepts
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.FORM.hidden_fields	web2py.gluon.html.FORM-class.html#hidden_fields
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.sqlhtml.SQLTABLE	web2py.gluon.sqlhtml.SQLTABLE-class.html
+web2py.gluon.html.DIV.regex_id	web2py.gluon.html.DIV-class.html#regex_id
+web2py.gluon.html.DIV._validate	web2py.gluon.html.DIV-class.html#_validate
+web2py.gluon.html.DIV.regex_tag	web2py.gluon.html.DIV-class.html#regex_tag
+web2py.gluon.html.DIV.__str__	web2py.gluon.html.DIV-class.html#__str__
+web2py.gluon.html.DIV.sibling	web2py.gluon.html.DIV-class.html#sibling
+web2py.gluon.html.TABLE.tag	web2py.gluon.html.TABLE-class.html#tag
+web2py.gluon.html.DIV.flatten	web2py.gluon.html.DIV-class.html#flatten
+web2py.gluon.html.TABLE._fixup	web2py.gluon.html.TABLE-class.html#_fixup
+web2py.gluon.html.DIV.append	web2py.gluon.html.DIV-class.html#append
+web2py.gluon.html.DIV.xml	web2py.gluon.html.DIV-class.html#xml
+web2py.gluon.html.DIV._setnode	web2py.gluon.html.DIV-class.html#_setnode
+web2py.gluon.sqlhtml.SQLTABLE.style	web2py.gluon.sqlhtml.SQLTABLE-class.html#style
+web2py.gluon.html.DIV._xml	web2py.gluon.html.DIV-class.html#_xml
+web2py.gluon.sqlhtml.SQLTABLE.__init__	web2py.gluon.sqlhtml.SQLTABLE-class.html#__init__
+web2py.gluon.html.DIV.siblings	web2py.gluon.html.DIV-class.html#siblings
+web2py.gluon.html.DIV.__len__	web2py.gluon.html.DIV-class.html#__len__
+web2py.gluon.html.DIV.elements	web2py.gluon.html.DIV-class.html#elements
+web2py.gluon.html.DIV.__getitem__	web2py.gluon.html.DIV-class.html#__getitem__
+web2py.gluon.html.DIV.insert	web2py.gluon.html.DIV-class.html#insert
+web2py.gluon.html.DIV._postprocessing	web2py.gluon.html.DIV-class.html#_postprocessing
+web2py.gluon.html.DIV.update	web2py.gluon.html.DIV-class.html#update
+web2py.gluon.html.DIV.__setitem__	web2py.gluon.html.DIV-class.html#__setitem__
+web2py.gluon.html.DIV.__delitem__	web2py.gluon.html.DIV-class.html#__delitem__
+web2py.gluon.html.DIV.regex_class	web2py.gluon.html.DIV-class.html#regex_class
+web2py.gluon.html.DIV.__nonzero__	web2py.gluon.html.DIV-class.html#__nonzero__
+web2py.gluon.html.DIV._traverse	web2py.gluon.html.DIV-class.html#_traverse
+web2py.gluon.html.DIV.element	web2py.gluon.html.DIV-class.html#element
+web2py.gluon.html.DIV._wrap_components	web2py.gluon.html.DIV-class.html#_wrap_components
+web2py.gluon.html.DIV.regex_attr	web2py.gluon.html.DIV-class.html#regex_attr
+web2py.gluon.sqlhtml.StringWidget	web2py.gluon.sqlhtml.StringWidget-class.html
+web2py.gluon.sqlhtml.StringWidget.widget	web2py.gluon.sqlhtml.StringWidget-class.html#widget
+web2py.gluon.sqlhtml.FormWidget._attributes	web2py.gluon.sqlhtml.FormWidget-class.html#_attributes
+web2py.gluon.sqlhtml.TextWidget	web2py.gluon.sqlhtml.TextWidget-class.html
+web2py.gluon.sqlhtml.TextWidget.widget	web2py.gluon.sqlhtml.TextWidget-class.html#widget
+web2py.gluon.sqlhtml.FormWidget._attributes	web2py.gluon.sqlhtml.FormWidget-class.html#_attributes
+web2py.gluon.sqlhtml.TimeWidget	web2py.gluon.sqlhtml.TimeWidget-class.html
+web2py.gluon.sqlhtml.StringWidget.widget	web2py.gluon.sqlhtml.StringWidget-class.html#widget
+web2py.gluon.sqlhtml.FormWidget._attributes	web2py.gluon.sqlhtml.FormWidget-class.html#_attributes
+web2py.gluon.sqlhtml.UploadWidget	web2py.gluon.sqlhtml.UploadWidget-class.html
+web2py.gluon.sqlhtml.UploadWidget.represent	web2py.gluon.sqlhtml.UploadWidget-class.html#represent
+web2py.gluon.sqlhtml.UploadWidget.widget	web2py.gluon.sqlhtml.UploadWidget-class.html#widget
+web2py.gluon.sqlhtml.UploadWidget.GENERIC_DESCRIPTION	web2py.gluon.sqlhtml.UploadWidget-class.html#GENERIC_DESCRIPTION
+web2py.gluon.sqlhtml.UploadWidget.DELETE_FILE	web2py.gluon.sqlhtml.UploadWidget-class.html#DELETE_FILE
+web2py.gluon.sqlhtml.UploadWidget.is_image	web2py.gluon.sqlhtml.UploadWidget-class.html#is_image
+web2py.gluon.sqlhtml.UploadWidget.DEFAULT_WIDTH	web2py.gluon.sqlhtml.UploadWidget-class.html#DEFAULT_WIDTH
+web2py.gluon.sqlhtml.FormWidget._attributes	web2py.gluon.sqlhtml.FormWidget-class.html#_attributes
+web2py.gluon.sqlhtml.UploadWidget.ID_DELETE_SUFFIX	web2py.gluon.sqlhtml.UploadWidget-class.html#ID_DELETE_SUFFIX
+web2py.gluon.storage.List	web2py.gluon.storage.List-class.html
+web2py.gluon.storage.List.__call__	web2py.gluon.storage.List-class.html#__call__
+web2py.gluon.storage.Messages	web2py.gluon.storage.Messages-class.html
+web2py.gluon.storage.Storage.getlist	web2py.gluon.storage.Storage-class.html#getlist
+web2py.gluon.storage.Messages.__init__	web2py.gluon.storage.Messages-class.html#__init__
+web2py.gluon.storage.Messages.__setattr__	web2py.gluon.storage.Messages-class.html#__setattr__
+web2py.gluon.storage.Messages.__getattr__	web2py.gluon.storage.Messages-class.html#__getattr__
+web2py.gluon.storage.Storage.__getstate__	web2py.gluon.storage.Storage-class.html#__getstate__
+web2py.gluon.storage.Storage.__setstate__	web2py.gluon.storage.Storage-class.html#__setstate__
+web2py.gluon.storage.Storage.getlast	web2py.gluon.storage.Storage-class.html#getlast
+web2py.gluon.storage.Storage.__delattr__	web2py.gluon.storage.Storage-class.html#__delattr__
+web2py.gluon.storage.Storage.__repr__	web2py.gluon.storage.Storage-class.html#__repr__
+web2py.gluon.storage.Storage.getfirst	web2py.gluon.storage.Storage-class.html#getfirst
+web2py.gluon.storage.Settings	web2py.gluon.storage.Settings-class.html
+web2py.gluon.storage.Storage.getlist	web2py.gluon.storage.Storage-class.html#getlist
+web2py.gluon.storage.Settings.__setattr__	web2py.gluon.storage.Settings-class.html#__setattr__
+web2py.gluon.storage.Storage.__getattr__	web2py.gluon.storage.Storage-class.html#__getattr__
+web2py.gluon.storage.Storage.__getstate__	web2py.gluon.storage.Storage-class.html#__getstate__
+web2py.gluon.storage.Storage.__setstate__	web2py.gluon.storage.Storage-class.html#__setstate__
+web2py.gluon.storage.Storage.getlast	web2py.gluon.storage.Storage-class.html#getlast
+web2py.gluon.storage.Storage.__delattr__	web2py.gluon.storage.Storage-class.html#__delattr__
+web2py.gluon.storage.Storage.__repr__	web2py.gluon.storage.Storage-class.html#__repr__
+web2py.gluon.storage.Storage.getfirst	web2py.gluon.storage.Storage-class.html#getfirst
+web2py.gluon.storage.Storage	web2py.gluon.storage.Storage-class.html
+web2py.gluon.storage.Storage.getlist	web2py.gluon.storage.Storage-class.html#getlist
+web2py.gluon.storage.Storage.__setattr__	web2py.gluon.storage.Storage-class.html#__setattr__
+web2py.gluon.storage.Storage.__getattr__	web2py.gluon.storage.Storage-class.html#__getattr__
+web2py.gluon.storage.Storage.__getstate__	web2py.gluon.storage.Storage-class.html#__getstate__
+web2py.gluon.storage.Storage.__setstate__	web2py.gluon.storage.Storage-class.html#__setstate__
+web2py.gluon.storage.Storage.getlast	web2py.gluon.storage.Storage-class.html#getlast
+web2py.gluon.storage.Storage.__delattr__	web2py.gluon.storage.Storage-class.html#__delattr__
+web2py.gluon.storage.Storage.__repr__	web2py.gluon.storage.Storage-class.html#__repr__
+web2py.gluon.storage.Storage.getfirst	web2py.gluon.storage.Storage-class.html#getfirst
+web2py.gluon.storage.StorageList	web2py.gluon.storage.StorageList-class.html
+web2py.gluon.storage.Storage.getlist	web2py.gluon.storage.Storage-class.html#getlist
+web2py.gluon.storage.Storage.__setattr__	web2py.gluon.storage.Storage-class.html#__setattr__
+web2py.gluon.storage.StorageList.__getattr__	web2py.gluon.storage.StorageList-class.html#__getattr__
+web2py.gluon.storage.Storage.__getstate__	web2py.gluon.storage.Storage-class.html#__getstate__
+web2py.gluon.storage.Storage.__setstate__	web2py.gluon.storage.Storage-class.html#__setstate__
+web2py.gluon.storage.Storage.getlast	web2py.gluon.storage.Storage-class.html#getlast
+web2py.gluon.storage.Storage.__delattr__	web2py.gluon.storage.Storage-class.html#__delattr__
+web2py.gluon.storage.Storage.__repr__	web2py.gluon.storage.Storage-class.html#__repr__
+web2py.gluon.storage.Storage.getfirst	web2py.gluon.storage.Storage-class.html#getfirst
+web2py.gluon.template.BlockNode	web2py.gluon.template.BlockNode-class.html
+web2py.gluon.template.BlockNode.extend	web2py.gluon.template.BlockNode-class.html#extend
+web2py.gluon.template.BlockNode.__str__	web2py.gluon.template.BlockNode-class.html#__str__
+web2py.gluon.template.BlockNode.append	web2py.gluon.template.BlockNode-class.html#append
+web2py.gluon.template.BlockNode.output	web2py.gluon.template.BlockNode-class.html#output
+web2py.gluon.template.BlockNode.__init__	web2py.gluon.template.BlockNode-class.html#__init__
+web2py.gluon.template.BlockNode.__repr__	web2py.gluon.template.BlockNode-class.html#__repr__
+web2py.gluon.template.Content	web2py.gluon.template.Content-class.html
+web2py.gluon.template.Content.insert	web2py.gluon.template.Content-class.html#insert
+web2py.gluon.template.Content.extend	web2py.gluon.template.Content-class.html#extend
+web2py.gluon.template.Content.__str__	web2py.gluon.template.Content-class.html#__str__
+web2py.gluon.template.Content.clear_content	web2py.gluon.template.Content-class.html#clear_content
+web2py.gluon.template.Content.append	web2py.gluon.template.Content-class.html#append
+web2py.gluon.template.Content._insert	web2py.gluon.template.Content-class.html#_insert
+web2py.gluon.template.BlockNode.output	web2py.gluon.template.BlockNode-class.html#output
+web2py.gluon.template.Content.__init__	web2py.gluon.template.Content-class.html#__init__
+web2py.gluon.template.BlockNode.__repr__	web2py.gluon.template.BlockNode-class.html#__repr__
+web2py.gluon.template.Node	web2py.gluon.template.Node-class.html
+web2py.gluon.template.Node.__str__	web2py.gluon.template.Node-class.html#__str__
+web2py.gluon.template.Node.__init__	web2py.gluon.template.Node-class.html#__init__
+web2py.gluon.template.SuperNode	web2py.gluon.template.SuperNode-class.html
+web2py.gluon.template.SuperNode.__str__	web2py.gluon.template.SuperNode-class.html#__str__
+web2py.gluon.template.SuperNode.__repr__	web2py.gluon.template.SuperNode-class.html#__repr__
+web2py.gluon.template.SuperNode.__init__	web2py.gluon.template.SuperNode-class.html#__init__
+web2py.gluon.template.TemplateParser	web2py.gluon.template.TemplateParser-class.html
+web2py.gluon.template.TemplateParser.reindent	web2py.gluon.template.TemplateParser-class.html#reindent
+web2py.gluon.template.TemplateParser.__str__	web2py.gluon.template.TemplateParser-class.html#__str__
+web2py.gluon.template.TemplateParser.parse	web2py.gluon.template.TemplateParser-class.html#parse
+web2py.gluon.template.TemplateParser.__init__	web2py.gluon.template.TemplateParser-class.html#__init__
+web2py.gluon.template.TemplateParser.extend	web2py.gluon.template.TemplateParser-class.html#extend
+web2py.gluon.template.TemplateParser.r_multiline	web2py.gluon.template.TemplateParser-class.html#r_multiline
+web2py.gluon.template.TemplateParser.re_unblock	web2py.gluon.template.TemplateParser-class.html#re_unblock
+web2py.gluon.template.TemplateParser.include	web2py.gluon.template.TemplateParser-class.html#include
+web2py.gluon.template.TemplateParser.re_pass	web2py.gluon.template.TemplateParser-class.html#re_pass
+web2py.gluon.template.TemplateParser.__unicode__	web2py.gluon.template.TemplateParser-class.html#__unicode__
+web2py.gluon.template.TemplateParser.r_tag	web2py.gluon.template.TemplateParser-class.html#r_tag
+web2py.gluon.template.TemplateParser.to_string	web2py.gluon.template.TemplateParser-class.html#to_string
+web2py.gluon.template.TemplateParser._raise_error	web2py.gluon.template.TemplateParser-class.html#_raise_error
+web2py.gluon.template.TemplateParser.re_block	web2py.gluon.template.TemplateParser-class.html#re_block
+web2py.gluon.template.TemplateParser._get_file_text	web2py.gluon.template.TemplateParser-class.html#_get_file_text
+web2py.gluon.tools.Auth	web2py.gluon.tools.Auth-class.html
+web2py.gluon.tools.Auth.profile	web2py.gluon.tools.Auth-class.html#profile
+web2py.gluon.tools.Auth.retrieve_username	web2py.gluon.tools.Auth-class.html#retrieve_username
+web2py.gluon.tools.Auth.add_permission	web2py.gluon.tools.Auth-class.html#add_permission
+web2py.gluon.tools.Auth.requires_membership	web2py.gluon.tools.Auth-class.html#requires_membership
+web2py.gluon.tools.Auth.add_group	web2py.gluon.tools.Auth-class.html#add_group
+web2py.gluon.tools.Auth.requires_permission	web2py.gluon.tools.Auth-class.html#requires_permission
+web2py.gluon.tools.Auth.random_password	web2py.gluon.tools.Auth-class.html#random_password
+web2py.gluon.tools.Auth.verify_email	web2py.gluon.tools.Auth-class.html#verify_email
+web2py.gluon.tools.Auth.id_group	web2py.gluon.tools.Auth-class.html#id_group
+web2py.gluon.tools.Auth.cas_login	web2py.gluon.tools.Auth-class.html#cas_login
+web2py.gluon.tools.Auth.define_tables	web2py.gluon.tools.Auth-class.html#define_tables
+web2py.gluon.tools.Auth.cas_validate	web2py.gluon.tools.Auth-class.html#cas_validate
+web2py.gluon.tools.Auth.del_group	web2py.gluon.tools.Auth-class.html#del_group
+web2py.gluon.tools.Auth.user_id	web2py.gluon.tools.Auth-class.html#user_id
+web2py.gluon.tools.Auth.del_permission	web2py.gluon.tools.Auth-class.html#del_permission
+web2py.gluon.tools.Auth._HTTP	web2py.gluon.tools.Auth-class.html#_HTTP
+web2py.gluon.tools.Auth.accessible_query	web2py.gluon.tools.Auth-class.html#accessible_query
+web2py.gluon.tools.Auth.login_bare	web2py.gluon.tools.Auth-class.html#login_bare
+web2py.gluon.tools.Auth.is_logged_in	web2py.gluon.tools.Auth-class.html#is_logged_in
+web2py.gluon.tools.Auth.basic	web2py.gluon.tools.Auth-class.html#basic
+web2py.gluon.tools.Auth.__call__	web2py.gluon.tools.Auth-class.html#__call__
+web2py.gluon.tools.Auth.requires_signature	web2py.gluon.tools.Auth-class.html#requires_signature
+web2py.gluon.tools.Auth.not_authorized	web2py.gluon.tools.Auth-class.html#not_authorized
+web2py.gluon.tools.Auth.reset_password_deprecated	web2py.gluon.tools.Auth-class.html#reset_password_deprecated
+web2py.gluon.tools.Auth.__get_migrate	web2py.gluon.tools.Auth-class.html#__get_migrate
+web2py.gluon.tools.Auth.is_impersonating	web2py.gluon.tools.Auth-class.html#is_impersonating
+web2py.gluon.tools.Auth.has_membership	web2py.gluon.tools.Auth-class.html#has_membership
+web2py.gluon.tools.Auth.log_event	web2py.gluon.tools.Auth-class.html#log_event
+web2py.gluon.tools.Auth._get_user_id	web2py.gluon.tools.Auth-class.html#_get_user_id
+web2py.gluon.tools.Auth.has_permission	web2py.gluon.tools.Auth-class.html#has_permission
+web2py.gluon.tools.Auth.logout	web2py.gluon.tools.Auth-class.html#logout
+web2py.gluon.tools.Auth.groups	web2py.gluon.tools.Auth-class.html#groups
+web2py.gluon.tools.Auth.user_group	web2py.gluon.tools.Auth-class.html#user_group
+web2py.gluon.tools.Auth.add_membership	web2py.gluon.tools.Auth-class.html#add_membership
+web2py.gluon.tools.Auth.retrieve_password	web2py.gluon.tools.Auth-class.html#retrieve_password
+web2py.gluon.tools.Auth.url	web2py.gluon.tools.Auth-class.html#url
+web2py.gluon.tools.Auth.get_or_create_user	web2py.gluon.tools.Auth-class.html#get_or_create_user
+web2py.gluon.tools.Auth.register	web2py.gluon.tools.Auth-class.html#register
+web2py.gluon.tools.Auth.reset_password	web2py.gluon.tools.Auth-class.html#reset_password
+web2py.gluon.tools.Auth.navbar	web2py.gluon.tools.Auth-class.html#navbar
+web2py.gluon.tools.Auth.requires_login	web2py.gluon.tools.Auth-class.html#requires_login
+web2py.gluon.tools.Auth.__init__	web2py.gluon.tools.Auth-class.html#__init__
+web2py.gluon.tools.Auth.change_password	web2py.gluon.tools.Auth-class.html#change_password
+web2py.gluon.tools.Auth.del_membership	web2py.gluon.tools.Auth-class.html#del_membership
+web2py.gluon.tools.Auth.impersonate	web2py.gluon.tools.Auth-class.html#impersonate
+web2py.gluon.tools.Auth.login	web2py.gluon.tools.Auth-class.html#login
+web2py.gluon.tools.Auth.request_reset_password	web2py.gluon.tools.Auth-class.html#request_reset_password
+web2py.gluon.tools.Auth.requires	web2py.gluon.tools.Auth-class.html#requires
+web2py.gluon.tools.Crud	web2py.gluon.tools.Crud-class.html
+web2py.gluon.tools.Crud.get_format	web2py.gluon.tools.Crud-class.html#get_format
+web2py.gluon.tools.Crud.archive	web2py.gluon.tools.Crud-class.html#archive
+web2py.gluon.tools.Crud.__init__	web2py.gluon.tools.Crud-class.html#__init__
+web2py.gluon.tools.Crud.tables	web2py.gluon.tools.Crud-class.html#tables
+web2py.gluon.tools.Crud.rows	web2py.gluon.tools.Crud-class.html#rows
+web2py.gluon.tools.Crud.create	web2py.gluon.tools.Crud-class.html#create
+web2py.gluon.tools.Crud.select	web2py.gluon.tools.Crud-class.html#select
+web2py.gluon.tools.Crud.__call__	web2py.gluon.tools.Crud-class.html#__call__
+web2py.gluon.tools.Crud.get_query	web2py.gluon.tools.Crud-class.html#get_query
+web2py.gluon.tools.Crud.read	web2py.gluon.tools.Crud-class.html#read
+web2py.gluon.tools.Crud.update	web2py.gluon.tools.Crud-class.html#update
+web2py.gluon.tools.Crud.log_event	web2py.gluon.tools.Crud-class.html#log_event
+web2py.gluon.tools.Crud.search	web2py.gluon.tools.Crud-class.html#search
+web2py.gluon.tools.Crud.url	web2py.gluon.tools.Crud-class.html#url
+web2py.gluon.tools.Crud.has_permission	web2py.gluon.tools.Crud-class.html#has_permission
+web2py.gluon.tools.Crud.delete	web2py.gluon.tools.Crud-class.html#delete
+web2py.gluon.tools.Mail	web2py.gluon.tools.Mail-class.html
+web2py.gluon.tools.Mail.send	web2py.gluon.tools.Mail-class.html#send
+web2py.gluon.tools.Mail.Attachment	web2py.gluon.tools.Mail.Attachment-class.html
+web2py.gluon.tools.Mail.__init__	web2py.gluon.tools.Mail-class.html#__init__
+web2py.gluon.tools.Mail.Attachment	web2py.gluon.tools.Mail.Attachment-class.html
+web2py.gluon.tools.Mail.Attachment.__init__	web2py.gluon.tools.Mail.Attachment-class.html#__init__
+web2py.gluon.tools.PluginManager	web2py.gluon.tools.PluginManager-class.html
+web2py.gluon.tools.PluginManager.__new__	web2py.gluon.tools.PluginManager-class.html#__new__
+web2py.gluon.tools.PluginManager.__contains__	web2py.gluon.tools.PluginManager-class.html#__contains__
+web2py.gluon.tools.PluginManager.keys	web2py.gluon.tools.PluginManager-class.html#keys
+web2py.gluon.tools.PluginManager.__getattr__	web2py.gluon.tools.PluginManager-class.html#__getattr__
+web2py.gluon.tools.PluginManager.instances	web2py.gluon.tools.PluginManager-class.html#instances
+web2py.gluon.tools.PluginManager.__init__	web2py.gluon.tools.PluginManager-class.html#__init__
+web2py.gluon.tools.Recaptcha	web2py.gluon.tools.Recaptcha-class.html
+web2py.gluon.tools.Recaptcha.VERIFY_SERVER	web2py.gluon.tools.Recaptcha-class.html#VERIFY_SERVER
+web2py.gluon.tools.Recaptcha._validate	web2py.gluon.tools.Recaptcha-class.html#_validate
+web2py.gluon.tools.Recaptcha.xml	web2py.gluon.tools.Recaptcha-class.html#xml
+web2py.gluon.tools.Recaptcha.__init__	web2py.gluon.tools.Recaptcha-class.html#__init__
+web2py.gluon.tools.Recaptcha.API_SERVER	web2py.gluon.tools.Recaptcha-class.html#API_SERVER
+web2py.gluon.tools.Recaptcha.API_SSL_SERVER	web2py.gluon.tools.Recaptcha-class.html#API_SSL_SERVER
+web2py.gluon.tools.Service	web2py.gluon.tools.Service-class.html
+web2py.gluon.tools.Service.__init__	web2py.gluon.tools.Service-class.html#__init__
+web2py.gluon.tools.Service.xml	web2py.gluon.tools.Service-class.html#xml
+web2py.gluon.tools.Service.amfrpc3	web2py.gluon.tools.Service-class.html#amfrpc3
+web2py.gluon.tools.Service.json	web2py.gluon.tools.Service-class.html#json
+web2py.gluon.tools.Service.serve_xmlrpc	web2py.gluon.tools.Service-class.html#serve_xmlrpc
+web2py.gluon.tools.Service.csv	web2py.gluon.tools.Service-class.html#csv
+web2py.gluon.tools.Service.soap	web2py.gluon.tools.Service-class.html#soap
+web2py.gluon.tools.Service.JsonRpcException	web2py.gluon.tools.Service.JsonRpcException-class.html
+web2py.gluon.tools.Service.serve_soap	web2py.gluon.tools.Service-class.html#serve_soap
+web2py.gluon.tools.Service.run	web2py.gluon.tools.Service-class.html#run
+web2py.gluon.tools.Service.serve_csv	web2py.gluon.tools.Service-class.html#serve_csv
+web2py.gluon.tools.Service.xmlrpc	web2py.gluon.tools.Service-class.html#xmlrpc
+web2py.gluon.tools.Service.serve_run	web2py.gluon.tools.Service-class.html#serve_run
+web2py.gluon.tools.Service.__call__	web2py.gluon.tools.Service-class.html#__call__
+web2py.gluon.tools.Service.serve_jsonrpc	web2py.gluon.tools.Service-class.html#serve_jsonrpc
+web2py.gluon.tools.Service.rss	web2py.gluon.tools.Service-class.html#rss
+web2py.gluon.tools.Service.serve_json	web2py.gluon.tools.Service-class.html#serve_json
+web2py.gluon.tools.Service.serve_rss	web2py.gluon.tools.Service-class.html#serve_rss
+web2py.gluon.tools.Service.jsonrpc	web2py.gluon.tools.Service-class.html#jsonrpc
+web2py.gluon.tools.Service.amfrpc	web2py.gluon.tools.Service-class.html#amfrpc
+web2py.gluon.tools.Service.serve_amfrpc	web2py.gluon.tools.Service-class.html#serve_amfrpc
+web2py.gluon.tools.Service.serve_xml	web2py.gluon.tools.Service-class.html#serve_xml
+web2py.gluon.tools.Service.error	web2py.gluon.tools.Service-class.html#error
+web2py.gluon.tools.Service.JsonRpcException	web2py.gluon.tools.Service.JsonRpcException-class.html
+web2py.gluon.tools.Service.JsonRpcException.__init__	web2py.gluon.tools.Service.JsonRpcException-class.html#__init__
+exceptions.Exception.__new__	exceptions.Exception-class.html#__new__
+web2py.gluon.validators.CLEANUP	web2py.gluon.validators.CLEANUP-class.html
+web2py.gluon.validators.CLEANUP.__call__	web2py.gluon.validators.CLEANUP-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.CLEANUP.__init__	web2py.gluon.validators.CLEANUP-class.html#__init__
+web2py.gluon.validators.CRYPT	web2py.gluon.validators.CRYPT-class.html
+web2py.gluon.validators.CRYPT.__call__	web2py.gluon.validators.CRYPT-class.html#__call__
+web2py.gluon.validators.CRYPT.__init__	web2py.gluon.validators.CRYPT-class.html#__init__
+web2py.gluon.validators.IS_ALPHANUMERIC	web2py.gluon.validators.IS_ALPHANUMERIC-class.html
+web2py.gluon.validators.IS_MATCH.__call__	web2py.gluon.validators.IS_MATCH-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_ALPHANUMERIC.__init__	web2py.gluon.validators.IS_ALPHANUMERIC-class.html#__init__
+web2py.gluon.validators.IS_DATE	web2py.gluon.validators.IS_DATE-class.html
+web2py.gluon.validators.IS_DATE.__call__	web2py.gluon.validators.IS_DATE-class.html#__call__
+web2py.gluon.validators.IS_DATE.formatter	web2py.gluon.validators.IS_DATE-class.html#formatter
+web2py.gluon.validators.IS_DATE.__init__	web2py.gluon.validators.IS_DATE-class.html#__init__
+web2py.gluon.validators.IS_DATETIME	web2py.gluon.validators.IS_DATETIME-class.html
+web2py.gluon.validators.IS_DATETIME.formatter	web2py.gluon.validators.IS_DATETIME-class.html#formatter
+web2py.gluon.validators.IS_DATETIME.__call__	web2py.gluon.validators.IS_DATETIME-class.html#__call__
+web2py.gluon.validators.IS_DATETIME.isodatetime	web2py.gluon.validators.IS_DATETIME-class.html#isodatetime
+web2py.gluon.validators.IS_DATETIME.__init__	web2py.gluon.validators.IS_DATETIME-class.html#__init__
+web2py.gluon.validators.IS_DATETIME.nice	web2py.gluon.validators.IS_DATETIME-class.html#nice
+web2py.gluon.validators.IS_DATETIME_IN_RANGE	web2py.gluon.validators.IS_DATETIME_IN_RANGE-class.html
+web2py.gluon.validators.IS_DATETIME.isodatetime	web2py.gluon.validators.IS_DATETIME-class.html#isodatetime
+web2py.gluon.validators.IS_DATETIME_IN_RANGE.__call__	web2py.gluon.validators.IS_DATETIME_IN_RANGE-class.html#__call__
+web2py.gluon.validators.IS_DATETIME.formatter	web2py.gluon.validators.IS_DATETIME-class.html#formatter
+web2py.gluon.validators.IS_DATETIME_IN_RANGE.__init__	web2py.gluon.validators.IS_DATETIME_IN_RANGE-class.html#__init__
+web2py.gluon.validators.IS_DATETIME.nice	web2py.gluon.validators.IS_DATETIME-class.html#nice
+web2py.gluon.validators.IS_DATE_IN_RANGE	web2py.gluon.validators.IS_DATE_IN_RANGE-class.html
+web2py.gluon.validators.IS_DATE_IN_RANGE.__call__	web2py.gluon.validators.IS_DATE_IN_RANGE-class.html#__call__
+web2py.gluon.validators.IS_DATE.formatter	web2py.gluon.validators.IS_DATE-class.html#formatter
+web2py.gluon.validators.IS_DATE_IN_RANGE.__init__	web2py.gluon.validators.IS_DATE_IN_RANGE-class.html#__init__
+web2py.gluon.validators.IS_DECIMAL_IN_RANGE	web2py.gluon.validators.IS_DECIMAL_IN_RANGE-class.html
+web2py.gluon.validators.IS_DECIMAL_IN_RANGE.__call__	web2py.gluon.validators.IS_DECIMAL_IN_RANGE-class.html#__call__
+web2py.gluon.validators.IS_DECIMAL_IN_RANGE.formatter	web2py.gluon.validators.IS_DECIMAL_IN_RANGE-class.html#formatter
+web2py.gluon.validators.IS_DECIMAL_IN_RANGE.__init__	web2py.gluon.validators.IS_DECIMAL_IN_RANGE-class.html#__init__
+web2py.gluon.validators.IS_EMAIL	web2py.gluon.validators.IS_EMAIL-class.html
+web2py.gluon.validators.IS_EMAIL.regex	web2py.gluon.validators.IS_EMAIL-class.html#regex
+web2py.gluon.validators.IS_EMAIL.regex_proposed_but_failed	web2py.gluon.validators.IS_EMAIL-class.html#regex_proposed_but_failed
+web2py.gluon.validators.IS_EMAIL.__call__	web2py.gluon.validators.IS_EMAIL-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_EMAIL.__init__	web2py.gluon.validators.IS_EMAIL-class.html#__init__
+web2py.gluon.validators.IS_EMPTY_OR	web2py.gluon.validators.IS_EMPTY_OR-class.html
+web2py.gluon.validators.IS_EMPTY_OR.set_self_id	web2py.gluon.validators.IS_EMPTY_OR-class.html#set_self_id
+web2py.gluon.validators.IS_EMPTY_OR._options	web2py.gluon.validators.IS_EMPTY_OR-class.html#_options
+web2py.gluon.validators.IS_EMPTY_OR.__call__	web2py.gluon.validators.IS_EMPTY_OR-class.html#__call__
+web2py.gluon.validators.IS_EMPTY_OR.formatter	web2py.gluon.validators.IS_EMPTY_OR-class.html#formatter
+web2py.gluon.validators.IS_EMPTY_OR.__init__	web2py.gluon.validators.IS_EMPTY_OR-class.html#__init__
+web2py.gluon.validators.IS_EQUAL_TO	web2py.gluon.validators.IS_EQUAL_TO-class.html
+web2py.gluon.validators.IS_EQUAL_TO.__call__	web2py.gluon.validators.IS_EQUAL_TO-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_EQUAL_TO.__init__	web2py.gluon.validators.IS_EQUAL_TO-class.html#__init__
+web2py.gluon.validators.IS_EXPR	web2py.gluon.validators.IS_EXPR-class.html
+web2py.gluon.validators.IS_EXPR.__call__	web2py.gluon.validators.IS_EXPR-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_EXPR.__init__	web2py.gluon.validators.IS_EXPR-class.html#__init__
+web2py.gluon.validators.IS_FLOAT_IN_RANGE	web2py.gluon.validators.IS_FLOAT_IN_RANGE-class.html
+web2py.gluon.validators.IS_FLOAT_IN_RANGE.__call__	web2py.gluon.validators.IS_FLOAT_IN_RANGE-class.html#__call__
+web2py.gluon.validators.IS_FLOAT_IN_RANGE.formatter	web2py.gluon.validators.IS_FLOAT_IN_RANGE-class.html#formatter
+web2py.gluon.validators.IS_FLOAT_IN_RANGE.__init__	web2py.gluon.validators.IS_FLOAT_IN_RANGE-class.html#__init__
+web2py.gluon.validators.IS_GENERIC_URL	web2py.gluon.validators.IS_GENERIC_URL-class.html
+web2py.gluon.validators.IS_GENERIC_URL.__call__	web2py.gluon.validators.IS_GENERIC_URL-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_GENERIC_URL.__init__	web2py.gluon.validators.IS_GENERIC_URL-class.html#__init__
+web2py.gluon.validators.IS_HTTP_URL	web2py.gluon.validators.IS_HTTP_URL-class.html
+web2py.gluon.validators.IS_HTTP_URL.__call__	web2py.gluon.validators.IS_HTTP_URL-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_HTTP_URL.__init__	web2py.gluon.validators.IS_HTTP_URL-class.html#__init__
+web2py.gluon.validators.IS_IMAGE	web2py.gluon.validators.IS_IMAGE-class.html
+web2py.gluon.validators.IS_IMAGE.__png	web2py.gluon.validators.IS_IMAGE-class.html#__png
+web2py.gluon.validators.IS_IMAGE.__jpeg	web2py.gluon.validators.IS_IMAGE-class.html#__jpeg
+web2py.gluon.validators.IS_IMAGE.__bmp	web2py.gluon.validators.IS_IMAGE-class.html#__bmp
+web2py.gluon.validators.IS_IMAGE.__call__	web2py.gluon.validators.IS_IMAGE-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_IMAGE.__gif	web2py.gluon.validators.IS_IMAGE-class.html#__gif
+web2py.gluon.validators.IS_IMAGE.__init__	web2py.gluon.validators.IS_IMAGE-class.html#__init__
+web2py.gluon.validators.IS_INT_IN_RANGE	web2py.gluon.validators.IS_INT_IN_RANGE-class.html
+web2py.gluon.validators.IS_INT_IN_RANGE.__call__	web2py.gluon.validators.IS_INT_IN_RANGE-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_INT_IN_RANGE.__init__	web2py.gluon.validators.IS_INT_IN_RANGE-class.html#__init__
+web2py.gluon.validators.IS_IN_DB	web2py.gluon.validators.IS_IN_DB-class.html
+web2py.gluon.validators.IS_IN_DB.build_set	web2py.gluon.validators.IS_IN_DB-class.html#build_set
+web2py.gluon.validators.IS_IN_DB.set_self_id	web2py.gluon.validators.IS_IN_DB-class.html#set_self_id
+web2py.gluon.validators.IS_IN_DB.__call__	web2py.gluon.validators.IS_IN_DB-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_IN_DB.options	web2py.gluon.validators.IS_IN_DB-class.html#options
+web2py.gluon.validators.IS_IN_DB.__init__	web2py.gluon.validators.IS_IN_DB-class.html#__init__
+web2py.gluon.validators.IS_IN_SET	web2py.gluon.validators.IS_IN_SET-class.html
+web2py.gluon.validators.IS_IN_SET.__call__	web2py.gluon.validators.IS_IN_SET-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_IN_SET.options	web2py.gluon.validators.IS_IN_SET-class.html#options
+web2py.gluon.validators.IS_IN_SET.__init__	web2py.gluon.validators.IS_IN_SET-class.html#__init__
+web2py.gluon.validators.IS_IN_SUBSET	web2py.gluon.validators.IS_IN_SUBSET-class.html
+web2py.gluon.validators.IS_IN_SUBSET.__call__	web2py.gluon.validators.IS_IN_SUBSET-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_IN_SET.options	web2py.gluon.validators.IS_IN_SET-class.html#options
+web2py.gluon.validators.IS_IN_SUBSET.__init__	web2py.gluon.validators.IS_IN_SUBSET-class.html#__init__
+web2py.gluon.validators.IS_IPV4	web2py.gluon.validators.IS_IPV4-class.html
+web2py.gluon.validators.IS_IPV4.regex	web2py.gluon.validators.IS_IPV4-class.html#regex
+web2py.gluon.validators.IS_IPV4.private	web2py.gluon.validators.IS_IPV4-class.html#private
+web2py.gluon.validators.IS_IPV4.numbers	web2py.gluon.validators.IS_IPV4-class.html#numbers
+web2py.gluon.validators.IS_IPV4.__call__	web2py.gluon.validators.IS_IPV4-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_IPV4.automatic	web2py.gluon.validators.IS_IPV4-class.html#automatic
+web2py.gluon.validators.IS_IPV4.__init__	web2py.gluon.validators.IS_IPV4-class.html#__init__
+web2py.gluon.validators.IS_IPV4.localhost	web2py.gluon.validators.IS_IPV4-class.html#localhost
+web2py.gluon.validators.IS_LENGTH	web2py.gluon.validators.IS_LENGTH-class.html
+web2py.gluon.validators.IS_LENGTH.__call__	web2py.gluon.validators.IS_LENGTH-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_LENGTH.__init__	web2py.gluon.validators.IS_LENGTH-class.html#__init__
+web2py.gluon.validators.IS_LIST_OF	web2py.gluon.validators.IS_LIST_OF-class.html
+web2py.gluon.validators.IS_LIST_OF.__call__	web2py.gluon.validators.IS_LIST_OF-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_LIST_OF.__init__	web2py.gluon.validators.IS_LIST_OF-class.html#__init__
+web2py.gluon.validators.IS_LOWER	web2py.gluon.validators.IS_LOWER-class.html
+web2py.gluon.validators.IS_LOWER.__call__	web2py.gluon.validators.IS_LOWER-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_MATCH	web2py.gluon.validators.IS_MATCH-class.html
+web2py.gluon.validators.IS_MATCH.__call__	web2py.gluon.validators.IS_MATCH-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_MATCH.__init__	web2py.gluon.validators.IS_MATCH-class.html#__init__
+web2py.gluon.validators.IS_NOT_EMPTY	web2py.gluon.validators.IS_NOT_EMPTY-class.html
+web2py.gluon.validators.IS_NOT_EMPTY.__call__	web2py.gluon.validators.IS_NOT_EMPTY-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_NOT_EMPTY.__init__	web2py.gluon.validators.IS_NOT_EMPTY-class.html#__init__
+web2py.gluon.validators.IS_NOT_IN_DB	web2py.gluon.validators.IS_NOT_IN_DB-class.html
+web2py.gluon.validators.IS_NOT_IN_DB.set_self_id	web2py.gluon.validators.IS_NOT_IN_DB-class.html#set_self_id
+web2py.gluon.validators.IS_NOT_IN_DB.__call__	web2py.gluon.validators.IS_NOT_IN_DB-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_NOT_IN_DB.__init__	web2py.gluon.validators.IS_NOT_IN_DB-class.html#__init__
+web2py.gluon.validators.IS_SLUG	web2py.gluon.validators.IS_SLUG-class.html
+web2py.gluon.validators.IS_SLUG.urlify	web2py.gluon.validators.IS_SLUG-class.html#urlify
+web2py.gluon.validators.IS_SLUG.__call__	web2py.gluon.validators.IS_SLUG-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_SLUG.__init__	web2py.gluon.validators.IS_SLUG-class.html#__init__
+web2py.gluon.validators.IS_STRONG	web2py.gluon.validators.IS_STRONG-class.html
+web2py.gluon.validators.IS_STRONG.__call__	web2py.gluon.validators.IS_STRONG-class.html#__call__
+web2py.gluon.validators.IS_STRONG.__init__	web2py.gluon.validators.IS_STRONG-class.html#__init__
+web2py.gluon.validators.IS_TIME	web2py.gluon.validators.IS_TIME-class.html
+web2py.gluon.validators.IS_TIME.__call__	web2py.gluon.validators.IS_TIME-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_TIME.__init__	web2py.gluon.validators.IS_TIME-class.html#__init__
+web2py.gluon.validators.IS_UPLOAD_FILENAME	web2py.gluon.validators.IS_UPLOAD_FILENAME-class.html
+web2py.gluon.validators.IS_UPLOAD_FILENAME.__call__	web2py.gluon.validators.IS_UPLOAD_FILENAME-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_UPLOAD_FILENAME.__init__	web2py.gluon.validators.IS_UPLOAD_FILENAME-class.html#__init__
+web2py.gluon.validators.IS_UPPER	web2py.gluon.validators.IS_UPPER-class.html
+web2py.gluon.validators.IS_UPPER.__call__	web2py.gluon.validators.IS_UPPER-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_URL	web2py.gluon.validators.IS_URL-class.html
+web2py.gluon.validators.IS_URL.__call__	web2py.gluon.validators.IS_URL-class.html#__call__
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.validators.IS_URL.__init__	web2py.gluon.validators.IS_URL-class.html#__init__
+web2py.gluon.validators.Validator	web2py.gluon.validators.Validator-class.html
+web2py.gluon.validators.Validator.formatter	web2py.gluon.validators.Validator-class.html#formatter
+web2py.gluon.widget.IO	web2py.gluon.widget.IO-class.html
+web2py.gluon.widget.IO.write	web2py.gluon.widget.IO-class.html#write
+web2py.gluon.widget.IO.__init__	web2py.gluon.widget.IO-class.html#__init__
+web2py.gluon.widget.web2pyDialog	web2py.gluon.widget.web2pyDialog-class.html
+web2py.gluon.widget.web2pyDialog.quit	web2py.gluon.widget.web2pyDialog-class.html#quit
+web2py.gluon.widget.web2pyDialog.update_canvas	web2py.gluon.widget.web2pyDialog-class.html#update_canvas
+web2py.gluon.widget.web2pyDialog.stop	web2py.gluon.widget.web2pyDialog-class.html#stop
+web2py.gluon.widget.web2pyDialog.update	web2py.gluon.widget.web2pyDialog-class.html#update
+web2py.gluon.widget.web2pyDialog.connect_pages	web2py.gluon.widget.web2pyDialog-class.html#connect_pages
+web2py.gluon.widget.web2pyDialog.start	web2py.gluon.widget.web2pyDialog-class.html#start
+web2py.gluon.widget.web2pyDialog.error	web2py.gluon.widget.web2pyDialog-class.html#error
+web2py.gluon.widget.web2pyDialog.checkTaskBar	web2py.gluon.widget.web2pyDialog-class.html#checkTaskBar
+web2py.gluon.widget.web2pyDialog.__init__	web2py.gluon.widget.web2pyDialog-class.html#__init__
+web2py.gluon.winservice.Service	web2py.gluon.winservice.Service-class.html
+web2py.gluon.winservice.Service.SvcDoRun	web2py.gluon.winservice.Service-class.html#SvcDoRun
+web2py.gluon.winservice.Service.SvcStop	web2py.gluon.winservice.Service-class.html#SvcStop
+web2py.gluon.winservice.Service.log	web2py.gluon.winservice.Service-class.html#log
+web2py.gluon.winservice.Service.stop	web2py.gluon.winservice.Service-class.html#stop
+web2py.gluon.winservice.Service._svc_display_name_	web2py.gluon.winservice.Service-class.html#_svc_display_name_
+web2py.gluon.winservice.Service.start	web2py.gluon.winservice.Service-class.html#start
+web2py.gluon.winservice.Service._svc_name_	web2py.gluon.winservice.Service-class.html#_svc_name_
+web2py.gluon.winservice.Service.__init__	web2py.gluon.winservice.Service-class.html#__init__
+web2py.gluon.winservice.Web2pyService	web2py.gluon.winservice.Web2pyService-class.html
+web2py.gluon.winservice.Service.SvcDoRun	web2py.gluon.winservice.Service-class.html#SvcDoRun
+web2py.gluon.winservice.Service.SvcStop	web2py.gluon.winservice.Service-class.html#SvcStop
+web2py.gluon.winservice.Web2pyService.chdir	web2py.gluon.winservice.Web2pyService-class.html#chdir
+web2py.gluon.winservice.Service.log	web2py.gluon.winservice.Service-class.html#log
+web2py.gluon.winservice.Web2pyService.start	web2py.gluon.winservice.Web2pyService-class.html#start
+web2py.gluon.winservice.Web2pyService.stop	web2py.gluon.winservice.Web2pyService-class.html#stop
+web2py.gluon.winservice.Web2pyService.server	web2py.gluon.winservice.Web2pyService-class.html#server
+web2py.gluon.winservice.Web2pyService._exe_args_	web2py.gluon.winservice.Web2pyService-class.html#_exe_args_
+web2py.gluon.winservice.Web2pyService._svc_name_	web2py.gluon.winservice.Web2pyService-class.html#_svc_name_
+web2py.gluon.winservice.Web2pyService._svc_display_name_	web2py.gluon.winservice.Web2pyService-class.html#_svc_display_name_
+web2py.gluon.winservice.Service.__init__	web2py.gluon.winservice.Service-class.html#__init__

ADDED   applications/examples/static/epydoc/class-tree.html
Index: applications/examples/static/epydoc/class-tree.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/class-tree.html
@@ -0,0 +1,1080 @@
+
+
+
+
+  Class Hierarchy
+  
+  
+
+
+
+
+
    
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
     
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    
+ [ Module Hierarchy
+ | Class Hierarchy ]
+

    
+
    Class Hierarchy
    
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:58 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/crarr.png
Index: applications/examples/static/epydoc/crarr.png
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/crarr.png
cannot compute difference between binary files

ADDED   applications/examples/static/epydoc/datetime.date-class.html
Index: applications/examples/static/epydoc/datetime.date-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/datetime.date-class.html
@@ -0,0 +1,960 @@
+
+
+
+
+  datetime.date
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        datetime ::
+        date ::
+        Class date
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class date


    
+
    +object --+
+         |
+        date
+
    
+
+
    Known Subclasses:
    
+
    
+    datetime
+
    
+
+
    
+date(year, month, day) --> date object

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __add__(x,
+        y)
    
+      x+y    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __eq__(x,
+        y)
    
+      x==y    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __ge__(x,
+        y)
    
+      x>=y    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getattribute__(...)
    
+      x.__getattribute__('name') <==> x.name    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __gt__(x,
+        y)
    
+      x>y    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __hash__(x)
    
+      hash(x)    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __le__(x,
+        y)
    
+      x<=y    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __lt__(x,
+        y)
    
+      x<y    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __ne__(x,
+        y)
    
+      x!=y    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __new__(T,
+        S,
+        ...)
    
+      Returns:
+a new object with type S, a subtype of T    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __radd__(x,
+        y)
    
+      y+x    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __reduce__()
    
+      Returns:
+(cls, state)    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __repr__(x)
    
+      repr(x)    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __rsub__(x,
+        y)
    
+      y-x    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __str__(x)
    
+      str(x)    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __sub__(x,
+        y)
    
+      x-y    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    ctime(...)
    
+      Return ctime() style string.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    fromordinal(...)
    
+      int -> date corresponding to a proleptic Gregorian ordinal.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    fromtimestamp(...)
    
+      timestamp -> local date from a POSIX timestamp (like 
+      time.time()).    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    isocalendar(...)
    
+      Return a 3-tuple containing ISO year, week number, and 
+      weekday.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    isoformat(...)
    
+      Return string in ISO 8601 format, YYYY-MM-DD.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    isoweekday(...)
    
+      Return the day of the week represented by the date.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    replace(...)
    
+      Return date with new specified fields.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    strftime(...)
    
+      format -> strftime() style string.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    timetuple(...)
    
+      Return time tuple, compatible with time.localtime().    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    today(...)
    
+      Current date or datetime:  same as 
+      self.__class__.fromtimestamp(time.time()).    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    toordinal(...)
    
+      Return proleptic Gregorian ordinal.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    weekday(...)
    
+      Return the day of the week represented by the date.    		
+            
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __init__,
+      __reduce_ex__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        max = datetime.date(9999, 12, 31)
+    
    
+       
+    
+        min = datetime.date(1, 1, 1)
+    
    
+       
+    
+        resolution = datetime.timedelta(1)
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+       
+    
+        day
+    
    
+       
+    
+        month
+    
    
+       
+    
+        year
+    
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __getattribute__(...)
+  
    
+      		 
+    
    
+  
+  x.__getattribute__('name') <==> x.name
+  
    
+    
    Overrides:
+      object.__getattribute__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __hash__(x)
+    
    (Hashing function)
+  
    
+      		 
+    
    
+  
+  hash(x)
+  
    
+    
    Overrides:
+      object.__hash__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __new__(T,
+        S,
+        ...)
+  
    
+      		 
+    
    
+  
+  
+  
    
+    
    Returns:
    
+        
    +a new object with type S, a subtype of T
+
+
    
+    
    Overrides:
+      object.__new__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __reduce__()
+  
    
+      		 
+    
    
+  
+  helper for pickle
+  
    
+    
    Returns:
    
+        
    +(cls, state)
+
+
    
+    
    Overrides:
+      object.__reduce__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __repr__(x)
+    
    (Representation operator)
+  
    
+      		 
+    
    
+  
+  repr(x)
+  
    
+    
    Overrides:
+      object.__repr__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __str__(x)
+    
    (Informal representation operator)
+  
    
+      		 
+    
    
+  
+  str(x)
+  
    
+    
    Overrides:
+      object.__str__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    isoweekday(...)
+  
    
+      		 
+    
    
+  
+  Return the day of the week represented by the date. Monday == 1 ... 
+  Sunday == 7
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    toordinal(...)
+  
    
+      		 
+    
    
+  
+  Return proleptic Gregorian ordinal.  January 1 of year 1 is day 1.
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    weekday(...)
+  
    
+      		 
+    
    
+  
+  Return the day of the week represented by the date. Monday == 0 ... 
+  Sunday == 6
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/datetime.datetime-class.html
Index: applications/examples/static/epydoc/datetime.datetime-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/datetime.datetime-class.html
@@ -0,0 +1,1383 @@
+
+
+
+
+  datetime.datetime
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        datetime ::
+        datetime ::
+        Class datetime
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class datetime


    
+
    +object --+    
+         |    
+      date --+
+             |
+            datetime
+
    
+
+
    
+
    datetime(year, month, day[, hour[, minute[, second[, 
+  microsecond[,tzinfo]]]]])
    
+  The year, month and day arguments are required. tzinfo may be None, or
+  an instance of a tzinfo subclass. The remaining arguments may be ints or 
+  longs.

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __add__(x,
+        y)
    
+      x+y    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __eq__(x,
+        y)
    
+      x==y    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __ge__(x,
+        y)
    
+      x>=y    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getattribute__(...)
    
+      x.__getattribute__('name') <==> x.name    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __gt__(x,
+        y)
    
+      x>y    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __hash__(x)
    
+      hash(x)    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __le__(x,
+        y)
    
+      x<=y    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __lt__(x,
+        y)
    
+      x<y    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __ne__(x,
+        y)
    
+      x!=y    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __new__(T,
+        S,
+        ...)
    
+      Returns:
+a new object with type S, a subtype of T    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __radd__(x,
+        y)
    
+      y+x    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __reduce__()
    
+      Returns:
+(cls, state)    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __repr__(x)
    
+      repr(x)    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __rsub__(x,
+        y)
    
+      y-x    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __str__(x)
    
+      str(x)    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __sub__(x,
+        y)
    
+      x-y    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    astimezone(...)
    
+      tz -> convert to local time in new timezone tz    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    combine(...)
    
+      date, time -> datetime with same date and time fields    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    ctime(...)
    
+      Return ctime() style string.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    date(...)
    
+      Return date object with same year, month and day.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    dst(...)
    
+      Return self.tzinfo.dst(self).    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    fromtimestamp(...)
    
+      timestamp[, tz] -> tz's local time from POSIX timestamp.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    isoformat(...)
    
+      [sep] -> string in ISO 8601 format, 
+      YYYY-MM-DDTHH:MM:SS[.mmmmmm][+HH:MM].    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    now(...)
    
+      [tz] -> new datetime with tz's local day and time.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    replace(...)
    
+      Return datetime with new specified fields.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    strptime(...)
    
+      string, format -> new datetime parsed from a string (like 
+      time.strptime()).    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    time(...)
    
+      Return time object with same time but with tzinfo=None.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    timetuple(...)
    
+      Return time tuple, compatible with time.localtime().    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    timetz(...)
    
+      Return time object with same time and tzinfo.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    tzname(...)
    
+      Return self.tzinfo.tzname(self).    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    utcfromtimestamp(...)
    
+      timestamp -> UTC datetime from a POSIX timestamp (like 
+      time.time()).    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    utcnow(...)
    
+      Return a new datetime representing UTC day and time.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    utcoffset(...)
    
+      Return self.tzinfo.utcoffset(self).    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    utctimetuple(...)
    
+      Return UTC time tuple, compatible with time.localtime().    		
+            
+            
+          
    
+      
+    
    
+    
    Inherited from date:
+      fromordinal,
+      isocalendar,
+      isoweekday,
+      strftime,
+      today,
+      toordinal,
+      weekday
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __init__,
+      __reduce_ex__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        max = datetime.datetime(9999, 12, 31, 23, 59, 59, 999999)
+    
    
+       
+    
+        min = datetime.datetime(1, 1, 1, 0, 0)
+    
    
+       
+    
+        resolution = datetime.timedelta(0, 0, 1)
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+       
+    
+        hour
+    
    
+       
+    
+        microsecond
+    
    
+       
+    
+        minute
+    
    
+       
+    
+        second
+    
    
+       
+    
+        tzinfo
+    
    
+    
    Inherited from date:
+      day,
+      month,
+      year
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __add__(x,
+        y)
+    
    (Addition operator)
+  
    
+      		 
+    
    
+  
+  x+y
+  
    
+    
    Overrides:
+      date.__add__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __eq__(x,
+        y)
+    
    (Equality operator)
+  
    
+      		 
+    
    
+  
+  x==y
+  
    
+    
    Overrides:
+      date.__eq__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __ge__(x,
+        y)
+    
    (Greater-than-or-equals operator)
+  
    
+      		 
+    
    
+  
+  x>=y
+  
    
+    
    Overrides:
+      date.__ge__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __getattribute__(...)
+  
    
+      		 
+    
    
+  
+  x.__getattribute__('name') <==> x.name
+  
    
+    
    Overrides:
+      date.__getattribute__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __gt__(x,
+        y)
+    
    (Greater-than operator)
+  
    
+      		 
+    
    
+  
+  x>y
+  
    
+    
    Overrides:
+      date.__gt__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __hash__(x)
+    
    (Hashing function)
+  
    
+      		 
+    
    
+  
+  hash(x)
+  
    
+    
    Overrides:
+      date.__hash__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __le__(x,
+        y)
+    
    (Less-than-or-equals operator)
+  
    
+      		 
+    
    
+  
+  x<=y
+  
    
+    
    Overrides:
+      date.__le__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __lt__(x,
+        y)
+    
    (Less-than operator)
+  
    
+      		 
+    
    
+  
+  x<y
+  
    
+    
    Overrides:
+      date.__lt__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __ne__(x,
+        y)
+  
    
+      		 
+    
    
+  
+  x!=y
+  
    
+    
    Overrides:
+      date.__ne__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __new__(T,
+        S,
+        ...)
+  
    
+      		 
+    
    
+  
+  
+  
    
+    
    Returns:
    
+        
    +a new object with type S, a subtype of T
+
+
    
+    
    Overrides:
+      date.__new__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __radd__(x,
+        y)
+    
    (Right-side addition operator)
+  
    
+      		 
+    
    
+  
+  y+x
+  
    
+    
    Overrides:
+      date.__radd__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __reduce__()
+  
    
+      		 
+    
    
+  
+  helper for pickle
+  
    
+    
    Returns:
    
+        
    +(cls, state)
+
+
    
+    
    Overrides:
+      date.__reduce__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __repr__(x)
+    
    (Representation operator)
+  
    
+      		 
+    
    
+  
+  repr(x)
+  
    
+    
    Overrides:
+      date.__repr__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __rsub__(x,
+        y)
+  
    
+      		 
+    
    
+  
+  y-x
+  
    
+    
    Overrides:
+      date.__rsub__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __str__(x)
+    
    (Informal representation operator)
+  
    
+      		 
+    
    
+  
+  str(x)
+  
    
+    
    Overrides:
+      date.__str__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __sub__(x,
+        y)
+    
    (Subtraction operator)
+  
    
+      		 
+    
    
+  
+  x-y
+  
    
+    
    Overrides:
+      date.__sub__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    ctime(...)
+  
    
+      		 
+    
    
+  
+  Return ctime() style string.
+  
    
+    
    Overrides:
+      date.ctime
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    fromtimestamp(...)
+  
    
+      		 
+    
    
+  
+  timestamp[, tz] -> tz's local time from POSIX timestamp.
+  
    
+    
    Overrides:
+      date.fromtimestamp
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    isoformat(...)
+  
    
+      		 
+    
    
+  
+  
    [sep] -> string in ISO 8601 format, 
+  YYYY-MM-DDTHH:MM:SS[.mmmmmm][+HH:MM].
    
+  sep is used to separate the year from the time, and defaults to 
+  'T'.
+  
    
+    
    Overrides:
+      date.isoformat
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    replace(...)
+  
    
+      		 
+    
    
+  
+  Return datetime with new specified fields.
+  
    
+    
    Overrides:
+      date.replace
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    timetuple(...)
+  
    
+      		 
+    
    
+  
+  Return time tuple, compatible with time.localtime().
+  
    
+    
    Overrides:
+      date.timetuple
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/datetime.time-class.html
Index: applications/examples/static/epydoc/datetime.time-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/datetime.time-class.html
@@ -0,0 +1,753 @@
+
+
+
+
+  datetime.time
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        datetime ::
+        time ::
+        Class time
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class time


    
+
    +object --+
+         |
+        time
+
    
+
+
    
+
    time([hour[, minute[, second[, microsecond[, tzinfo]]]]]) --> a 
+  time object
    
+  All arguments are optional. tzinfo may be None, or an instance of a 
+  tzinfo subclass. The remaining arguments may be ints or longs.

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __eq__(x,
+        y)
    
+      x==y    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __ge__(x,
+        y)
    
+      x>=y    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getattribute__(...)
    
+      x.__getattribute__('name') <==> x.name    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __gt__(x,
+        y)
    
+      x>y    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __hash__(x)
    
+      hash(x)    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __le__(x,
+        y)
    
+      x<=y    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __lt__(x,
+        y)
    
+      x<y    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __ne__(x,
+        y)
    
+      x!=y    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __new__(T,
+        S,
+        ...)
    
+      Returns:
+a new object with type S, a subtype of T    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __nonzero__(x)
    
+      x != 0    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __reduce__()
    
+      Returns:
+(cls, state)    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __repr__(x)
    
+      repr(x)    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __str__(x)
    
+      str(x)    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    dst(...)
    
+      Return self.tzinfo.dst(self).    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    isoformat(...)
    
+      Return string in ISO 8601 format, HH:MM:SS[.mmmmmm][+HH:MM].    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    replace(...)
    
+      Return time with new specified fields.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    strftime(...)
    
+      format -> strftime() style string.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    tzname(...)
    
+      Return self.tzinfo.tzname(self).    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    utcoffset(...)
    
+      Return self.tzinfo.utcoffset(self).    		
+            
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __init__,
+      __reduce_ex__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        max = datetime.time(23, 59, 59, 999999)
+    
    
+       
+    
+        min = datetime.time(0, 0)
+    
    
+       
+    
+        resolution = datetime.timedelta(0, 0, 1)
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+       
+    
+        hour
+    
    
+       
+    
+        microsecond
+    
    
+       
+    
+        minute
+    
    
+       
+    
+        second
+    
    
+       
+    
+        tzinfo
+    
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __getattribute__(...)
+  
    
+      		 
+    
    
+  
+  x.__getattribute__('name') <==> x.name
+  
    
+    
    Overrides:
+      object.__getattribute__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __hash__(x)
+    
    (Hashing function)
+  
    
+      		 
+    
    
+  
+  hash(x)
+  
    
+    
    Overrides:
+      object.__hash__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __new__(T,
+        S,
+        ...)
+  
    
+      		 
+    
    
+  
+  
+  
    
+    
    Returns:
    
+        
    +a new object with type S, a subtype of T
+
+
    
+    
    Overrides:
+      object.__new__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __reduce__()
+  
    
+      		 
+    
    
+  
+  helper for pickle
+  
    
+    
    Returns:
    
+        
    +(cls, state)
+
+
    
+    
    Overrides:
+      object.__reduce__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __repr__(x)
+    
    (Representation operator)
+  
    
+      		 
+    
    
+  
+  repr(x)
+  
    
+    
    Overrides:
+      object.__repr__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __str__(x)
+    
    (Informal representation operator)
+  
    
+      		 
+    
    
+  
+  str(x)
+  
    
+    
    Overrides:
+      object.__str__
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/epydoc.css
Index: applications/examples/static/epydoc/epydoc.css
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/epydoc.css
@@ -0,0 +1,410 @@
+
+
+/* Epydoc CSS Stylesheet
+ *
+ * This stylesheet can be used to customize the appearance of epydoc's
+ * HTML output.
+ *
+ */
+
+/* Default Colors & Styles
+ *   - Set the default foreground & background color with 'body'; and 
+ *     link colors with 'a:link' and 'a:visited'.
+ *   - Use bold for decision list terms.
+ *   - The heading styles defined here are used for headings *within*
+ *     docstring descriptions.  All headings used by epydoc itself use
+ *     either class='epydoc' or class='toc' (CSS styles for both
+ *     defined below).
+body                        { background: #ffffff; color: #000000; }
+a:link                      { color: #0000ff; }
+a:visited                   { color: #204080; }
+dt                          { font-weight: bold; }
+h1                          { font-size: +140%; font-style: italic;
+                              font-weight: bold; }
+h2                          { font-size: +125%; font-style: italic;
+                              font-weight: bold; }
+h3                          { font-size: +110%; font-style: italic;
+                              font-weight: normal; }
+code                        { font-size: 100%; }
+ */
+ 
+body                     {  background-color: #fff; color: #585858; font-size: 10pt; font-family: georgia, serif; }
+a                          {color: #FF5C1F; }
+a:hover               { text-decoration: underline; }
+a:visited               { color: #FF5C1F;}
+dt                          { font-weight: bold; }
+h1                          { font-size: +140%; font-style: italic;
+                              font-weight: bold; }
+h2                          { color: #185360; font-size: +125%; font-style: italic;
+                              font-weight: bold; }
+h3                          { color: #185360; font-size: +110%; font-style: italic;
+                              font-weight: normal; }
+code                        { font-size: 100%; }
+
+/* Page Header & Footer
+ *   - The standard page header consists of a navigation bar (with
+ *     pointers to standard pages such as 'home' and 'trees'); a
+ *     breadcrumbs list, which can be used to navigate to containing
+ *     classes or modules; options links, to show/hide private
+ *     variables and to show/hide frames; and a page title (using
+ *     
    ).  The page title may be followed by a link to the
+ *     corresponding source code (using 'span.codelink').
+ *   - The footer consists of a navigation bar, a timestamp, and a
+ *     pointer to epydoc's homepage.
+
+h1.epydoc                   { margin: 0; font-size: +140%; font-weight: bold; }
+h2.epydoc                   { font-size: +130%; font-weight: bold; }
+h3.epydoc                   { font-size: +115%; font-weight: bold; }
+td h3.epydoc                { font-size: +115%; font-weight: bold;
+                              margin-bottom: 0; }
+table.navbar                { background: #a0c0ff; color: #000000;
+                              border: 2px groove #c0d0d0; }
+table.navbar table          { color: #000000; }
+th.navbar-select            { background: #70b0ff;
+                              color: #000000; } 
+table.navbar a              { text-decoration: none; }  
+table.navbar a:link         { color: #0000ff; }
+table.navbar a:visited      { color: #204080; }
+span.breadcrumbs            { font-size: 85%; font-weight: bold; }
+span.options                { font-size: 70%; }
+span.codelink               { font-size: 85%; }
+td.footer                   { font-size: 85%; }
+*/
+
+h1.epydoc                   { margin: 0; font-size: +140%; font-weight: bold; }
+h2.epydoc                   { font-size: +130%; font-weight: bold; }
+h3.epydoc                   { font-size: +115%; font-weight: bold; }
+td h3.epydoc                { font-size: +115%; font-weight: bold;
+                              margin-bottom: 0; }
+table.navbar                { background:  url('title.png') repeat-x; 
+                                    #background: #a0c0ff; 
+                                    color: #FF5C1F;
+                                    #border: 2px groove #c0d0d0; }
+
+table.navbar table          { color: #FF5C1F; }
+th.navbar-select            { background: #fff;
+                                        color: #195866; } 
+
+table.navbar a              { text-decoration: none; 
+                                        color: #FF5C1F;}  
+table.navbar a:link         { color: #FF5C1F; }
+table.navbar a:visited      { color: #FF5C1F; }
+
+span.breadcrumbs            { font-size: 85%; font-weight: bold; }
+span.options                { font-size: 70%; }
+span.codelink               { font-size: 85%; }
+td.footer                   { font-size: 85%; }
+
+
+/* Table Headers
+ *   - Each summary table and details section begins with a 'header'
+ *     row.  This row contains a section title (marked by
+ *     'span.table-header') as well as a show/hide private link
+ *     (marked by 'span.options', defined above).
+ *   - Summary tables that contain user-defined groups mark those
+ *     groups using 'group header' rows.
+
+td.table-header             { background: #70b0ff; color: #000000;
+                              border: 1px solid #608090; }
+td.table-header table       { color: #000000; }
+td.table-header table a:link      { color: #0000ff; }
+td.table-header table a:visited   { color: #204080; }
+span.table-header           { font-size: 120%; font-weight: bold; }
+th.group-header             { background: #c0e0f8; color: #000000;
+                              text-align: left; font-style: italic; 
+                              font-size: 115%; 
+                              border: 1px solid #608090; }
+*/
+td.table-header             { background: #258396; color: #000000;
+                              border: 1px solid #608090; }
+
+td.table-header table       { color: #fff; }
+td.table-header table a:link      { color: #FF5C1F; }
+td.table-header table a:visited   { color: #FF5C1F; }
+span.table-header           { font-size: 120%; font-weight: bold; }
+th.group-header             { background: #185360; color: #fff;
+                              text-align: left; font-style: italic; 
+                              font-size: 115%; 
+                              border: 1px solid #608090; }
+
+/* Summary Tables (functions, variables, etc)
+ *   - Each object is described by a single row of the table with
+ *     two cells.  The left cell gives the object's type, and is
+ *     marked with 'code.summary-type'.  The right cell gives the
+ *     object's name and a summary description.
+ *   - CSS styles for the table's header and group headers are
+ *     defined above, under 'Table Headers'
+ */
+table.summary               { border-collapse: collapse;
+                              background: #e8f0f8; color: #000000;
+                              border: 1px solid #608090;
+                              margin-bottom: 0.5em; }
+td.summary                  { border: 1px solid #608090; }
+code.summary-type           { font-size: 85%; }
+table.summary a:link        { color: #FF5C1F; }
+table.summary a:visited     { color: #FF5C1F; }
+
+
+/* Details Tables (functions, variables, etc)
+ *   - Each object is described in its own div.
+ *   - A single-row summary table w/ table-header is used as
+ *     a header for each details section (CSS style for table-header
+ *     is defined above, under 'Table Headers').
+ */
+table.details               { border-collapse: collapse;
+                              background: #e8f0f8; color: #585858;
+                              border: 1px solid #608090;
+                              margin: .2em 0 0 0; }
+table.details table         { color: #fff; }
+table.details a:link        { color: #FF5C1F; }
+table.details a:visited     { color: #FF5C1F; }
+
+/* Fields */
+dl.fields                   { margin-left: 2em; margin-top: 1em;
+                              margin-bottom: 1em; }
+dl.fields dd ul             { margin-left: 0em; padding-left: 0em; }
+div.fields                  { margin-left: 2em; }
+div.fields p                { margin-bottom: 0.5em; }
+
+/* Index tables (identifier index, term index, etc)
+ *   - link-index is used for indices containing lists of links
+ *     (namely, the identifier index & term index).
+ *   - index-where is used in link indices for the text indicating
+ *     the container/source for each link.
+ *   - metadata-index is used for indices containing metadata
+ *     extracted from fields (namely, the bug index & todo index).
+ */
+table.link-index            { border-collapse: collapse;
+                              background: #e8f0f8; color: #000000;
+                              border: 1px solid #608090; }
+td.link-index               { border-width: 0px; }
+table.link-index a:link     { color: #FF5C1F; }
+table.link-index a:visited  { color: #FF5C1F; }
+span.index-where            { font-size: 70%; }
+table.metadata-index        { border-collapse: collapse;
+                              background: #e8f0f8; color: #000000;
+                              border: 1px solid #608090; 
+                              margin: .2em 0 0 0; }
+td.metadata-index           { border-width: 1px; border-style: solid; }
+table.metadata-index a:link { color: #FF5C1F; }
+table.metadata-index a:visited  { color: #FF5C1F; }
+
+/* Function signatures
+ *   - sig* is used for the signature in the details section.
+ *   - .summary-sig* is used for the signature in the summary 
+ *     table, and when listing property accessor functions.
+.sig-name                   { color: #006080; }
+.sig-arg                    { color: #008060; }
+.sig-default                { color: #602000; }
+.summary-sig                { font-family: monospace; }
+.summary-sig-name           { color: #006080; font-weight: bold; }
+table.summary a.summary-sig-name:link
+                            { color: #006080; font-weight: bold; }
+table.summary a.summary-sig-name:visited
+                            { color: #006080; font-weight: bold; }
+.summary-sig-arg            { color: #006040; }
+.summary-sig-default        { color: #501800; }
+ * */
+.sig-name                   { color: #FF5C1F; }
+.sig-arg                    { color: #008060; }
+.sig-default                { color: #602000; }
+.summary-sig                { font-family: monospace; }
+.summary-sig-name           { color: #FF5C1F; font-weight: bold; }
+table.summary a.summary-sig-name:link
+                            { color: #FF5C1F; font-weight: bold; }
+table.summary a.summary-sig-name:visited
+                            { color: #FF5C1F; font-weight: bold; }
+.summary-sig-arg            { color: #006040; }
+.summary-sig-default        { color: #FF5C1F; }
+
+
+/* To render variables, classes etc. like functions */
+table.summary .summary-name { color: #FF5C1F; font-weight: bold;
+                              font-family: monospace; }
+table.summary
+     a.summary-name:link    { color: #FF5C1F; font-weight: bold;
+                              font-family: monospace; }
+table.summary
+    a.summary-name:visited  { color: #FF5C1F; font-weight: bold;
+                              font-family: monospace; }
+
+/* Variable values
+ *   - In the 'variable details' sections, each variable's value is
+ *     listed in a 'pre.variable' box.  The width of this box is
+ *     restricted to 80 chars; if the value's repr is longer than
+ *     this it will be wrapped, using a backslash marked with
+ *     class 'variable-linewrap'.  If the value's repr is longer
+ *     than 3 lines, the rest will be elided; and an ellipsis
+ *     marker ('...' marked with 'variable-ellipsis') will be used.
+ *   - If the value is a string, its quote marks will be marked
+ *     with 'variable-quote'.
+ *   - If the variable is a regexp, it is syntax-highlighted using
+ *     the re* CSS classes.
+ */
+pre.variable                { padding: .5em; margin: 0;
+                              background: #dce4ec; color: #000000;
+                              border: 1px solid #708890; }
+.variable-linewrap          { color: #604000; font-weight: bold; }
+.variable-ellipsis          { color: #604000; font-weight: bold; }
+.variable-quote             { color: #604000; font-weight: bold; }
+.variable-group             { color: #008000; font-weight: bold; }
+.variable-op                { color: #604000; font-weight: bold; }
+.variable-string            { color: #006030; }
+.variable-unknown           { color: #a00000; font-weight: bold; }
+.re                         { color: #000000; }
+.re-char                    { color: #006030; }
+.re-op                      { color: #600000; }
+.re-group                   { color: #003060; }
+.re-ref                     { color: #404040; }
+
+/* Base tree
+ *   - Used by class pages to display the base class hierarchy.
+ */
+pre.base-tree               { font-size: 80%; margin: 0; }
+
+/* Frames-based table of contents headers
+ *   - Consists of two frames: one for selecting modules; and
+ *     the other listing the contents of the selected module.
+ *   - h1.toc is used for each frame's heading
+ *   - h2.toc is used for subheadings within each frame.
+ */
+h1.toc                      { text-align: center; font-size: 105%;
+                              margin: 0; font-weight: bold;
+                              padding: 0; }
+h2.toc                      { font-size: 100%; font-weight: bold; 
+                              margin: 0.5em 0 0 -0.3em; }
+
+/* Syntax Highlighting for Source Code
+ *   - doctest examples are displayed in a 'pre.py-doctest' block.
+ *     If the example is in a details table entry, then it will use
+ *     the colors specified by the 'table pre.py-doctest' line.
+ *   - Source code listings are displayed in a 'pre.py-src' block.
+ *     Each line is marked with 'span.py-line' (used to draw a line
+ *     down the left margin, separating the code from the line
+ *     numbers).  Line numbers are displayed with 'span.py-lineno'.
+ *     The expand/collapse block toggle button is displayed with
+ *     'a.py-toggle' (Note: the CSS style for 'a.py-toggle' should not
+ *     modify the font size of the text.)
+ *   - If a source code page is opened with an anchor, then the
+ *     corresponding code block will be highlighted.  The code
+ *     block's header is highlighted with 'py-highlight-hdr'; and
+ *     the code block's body is highlighted with 'py-highlight'.
+ *   - The remaining py-* classes are used to perform syntax
+ *     highlighting (py-string for string literals, py-name for names,
+ *     etc.)
+
+pre.py-doctest              { padding: .5em; margin: 1em;
+                              background: #e8f0f8; color: #000000;
+                              border: 1px solid #708890; }
+table pre.py-doctest        { background: #dce4ec;
+                              color: #000000; }
+pre.py-src                  { border: 2px solid #000000; 
+                              background: #f0f0f0; color: #000000; }
+.py-line                    { border-left: 2px solid #000000; 
+                              margin-left: .2em; padding-left: .4em; }
+.py-lineno                  { font-style: italic; font-size: 90%;
+                              padding-left: .5em; }
+a.py-toggle                 { text-decoration: none; }
+div.py-highlight-hdr        { border-top: 2px solid #000000;
+                              border-bottom: 2px solid #000000;
+                              background: #d8e8e8; }
+div.py-highlight            { border-bottom: 2px solid #000000;
+                              background: #d0e0e0; }
+.py-prompt                  { color: #005050; font-weight: bold;}
+.py-more                    { color: #005050; font-weight: bold;}
+.py-string                  { color: #006030; }
+.py-comment                 { color: #003060; }
+.py-keyword                 { color: #600000; }
+.py-output                  { color: #404040; }
+.py-name                    { color: #000050; }
+.py-name:link               { color: #000050 !important; }
+.py-name:visited            { color: #000050 !important; }
+.py-number                  { color: #005000; }
+.py-defname                 { color: #000060; font-weight: bold; }
+.py-def-name                { color: #000060; font-weight: bold; }
+.py-base-class              { color: #000060; }
+.py-param                   { color: #000060; }
+.py-docstring               { color: #006030; }
+.py-decorator               { color: #804020; }
+ */
+/* Use this if you don't want links to names underlined: */
+/*a.py-name                   { text-decoration: none; }*/
+
+pre.py-doctest              { padding: .5em; margin: 1em;
+                              background: #e8f0f8; color: #000000;
+                              border: 1px solid #708890; }
+table pre.py-doctest        { background: #dce4ec;
+                              color: #000000; }
+pre.py-src                  { border: 2px solid #000000; 
+                              background: #f0f0f0; color: #000000; }
+.py-line                    { border-left: 2px solid #000000; 
+                              margin-left: .2em; padding-left: .4em; }
+.py-lineno                  { font-style: italic; font-size: 90%;
+                              padding-left: .5em; }
+a.py-toggle                 { text-decoration: none; }
+div.py-highlight-hdr        { border-top: 2px solid #000000;
+                              border-bottom: 2px solid #000000;
+                              background: #d8e8e8; }
+div.py-highlight            { border-bottom: 2px solid #000000;
+                              background: #d0e0e0; }
+.py-prompt                  { color: #005050; font-weight: bold;}
+.py-more                    { color: #005050; font-weight: bold;}
+.py-string                  { color: green; }
+.py-comment                 { color: green; }
+.py-keyword                 { color: blue; }
+.py-output                  { color: #404040; }
+.py-name                    { color: #585858;}
+.py-name:link               { color: #FF5C1F !important; }
+.py-name:visited            { color: #FF5C1F !important; }
+.py-number                  { color: #005000; }
+.py-defname                 { color: #FF5C1F; font-weight: bold; }
+.py-def-name                { color: #FF5C1F; font-weight: bold; }
+.py-base-class              { color: #FF5C1F; }
+.py-param                   { color: #000060; }
+.py-docstring               { color: green; }
+.py-decorator               { color: #804020; }
+
+/* Graphs & Diagrams
+ *   - These CSS styles are used for graphs & diagrams generated using
+ *     Graphviz dot.  'img.graph-without-title' is used for bare
+ *     diagrams (to remove the border created by making the image
+ *     clickable).
+ */
+img.graph-without-title     { border: none; }
+img.graph-with-title        { border: 1px solid #000000; }
+span.graph-title            { font-weight: bold; }
+span.graph-caption          { }
+
+/* General-purpose classes
+ *   - 'p.indent-wrapped-lines' defines a paragraph whose first line
+ *     is not indented, but whose subsequent lines are.
+ *   - The 'nomargin-top' class is used to remove the top margin (e.g.
+ *     from lists).  The 'nomargin' class is used to remove both the
+ *     top and bottom margin (but not the left or right margin --
+ *     for lists, that would cause the bullets to disappear.)
+ */
+p.indent-wrapped-lines      { padding: 0 0 0 7em; text-indent: -7em; 
+                              margin: 0; }
+.nomargin-top               { margin-top: 0; }
+.nomargin                   { margin-top: 0; margin-bottom: 0; }
+
+/* HTML Log */
+div.log-block               { padding: 0; margin: .5em 0 .5em 0;
+                              background: #e8f0f8; color: #000000;
+                              border: 1px solid #000000; }
+div.log-error               { padding: .1em .3em .1em .3em; margin: 4px;
+                              background: #ffb0b0; color: #000000;
+                              border: 1px solid #000000; }
+div.log-warning             { padding: .1em .3em .1em .3em; margin: 4px;
+                              background: #ffffb0; color: #000000;
+                              border: 1px solid #000000; }
+div.log-info               { padding: .1em .3em .1em .3em; margin: 4px;
+                              background: #b0ffb0; color: #000000;
+                              border: 1px solid #000000; }
+h2.log-hdr                  { background: #70b0ff; color: #000000;
+                              margin: 0; padding: 0em 0.5em 0em 0.5em;
+                              border-bottom: 1px solid #000000; font-size: 110%; }
+p.log                       { font-weight: bold; margin: .5em 0 .5em 0; }
+tr.opt-changed              { color: #000000; font-weight: bold; }
+tr.opt-default              { color: #606060; }
+pre.log                     { margin: 0; padding: 0; padding-left: 1em; }

ADDED   applications/examples/static/epydoc/epydoc.js
Index: applications/examples/static/epydoc/epydoc.js
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/epydoc.js
@@ -0,0 +1,280 @@
+function toggle_private() {
+        // Search for any private/public links on this page.  Store
+        // their old text in "cmd," so we will know what action to
+        // take; and change their text to the opposite action.
+        var cmd = "?";
+        var elts = document.getElementsByTagName("a");
+        for(var i=0; i...
    ";
+    elt.innerHTML = s;
+  }
+}
+
+function toggle(id) {
+  elt = document.getElementById(id+"-toggle");
+  if (elt.innerHTML == "-")
+      collapse(id); 
+  else
+      expand(id);
+  return false;
+}
+
+function highlight(id) {
+  var elt = document.getElementById(id+"-def");
+  if (elt) elt.className = "py-highlight-hdr";
+  var elt = document.getElementById(id+"-expanded");
+  if (elt) elt.className = "py-highlight";
+  var elt = document.getElementById(id+"-collapsed");
+  if (elt) elt.className = "py-highlight";
+}
+
+function num_lines(s) {
+  var n = 1;
+  var pos = s.indexOf("\n");
+  while ( pos > 0) {
+    n += 1;
+    pos = s.indexOf("\n", pos+1);
+  }
+  return n;
+}
+
+// Collapse all blocks that mave more than `min_lines` lines.
+function collapse_all(min_lines) {
+  var elts = document.getElementsByTagName("div");
+  for (var i=0; i 0)
+      if (elt.id.substring(split, elt.id.length) == "-expanded")
+        if (num_lines(elt.innerHTML) > min_lines)
+          collapse(elt.id.substring(0, split));
+  }
+}
+
+function expandto(href) {
+  var start = href.indexOf("#")+1;
+  if (start != 0 && start != href.length) {
+    if (href.substring(start, href.length) != "-") {
+      collapse_all(4);
+      pos = href.indexOf(".", start);
+      while (pos != -1) {
+        var id = href.substring(start, pos);
+        expand(id);
+        pos = href.indexOf(".", pos+1);
+      }
+      var id = href.substring(start, href.length);
+      expand(id);
+      highlight(id);
+    }
+  }
+}
+
+function kill_doclink(id) {
+  var parent = document.getElementById(id);
+  parent.removeChild(parent.childNodes.item(0));
+}
+function auto_kill_doclink(ev) {
+  if (!ev) var ev = window.event;
+  if (!this.contains(ev.toElement)) {
+    var parent = document.getElementById(this.parentID);
+    parent.removeChild(parent.childNodes.item(0));
+  }
+}
+
+function doclink(id, name, targets_id) {
+  var elt = document.getElementById(id);
+
+  // If we already opened the box, then destroy it.
+  // (This case should never occur, but leave it in just in case.)
+  if (elt.childNodes.length > 1) {
+    elt.removeChild(elt.childNodes.item(0));
+  }
+  else {
+    // The outer box: relative + inline positioning.
+    var box1 = document.createElement("div");
+    box1.style.position = "relative";
+    box1.style.display = "inline";
+    box1.style.top = 0;
+    box1.style.left = 0;
+  
+    // A shadow for fun
+    var shadow = document.createElement("div");
+    shadow.style.position = "absolute";
+    shadow.style.left = "-1.3em";
+    shadow.style.top = "-1.3em";
+    shadow.style.background = "#404040";
+    
+    // The inner box: absolute positioning.
+    var box2 = document.createElement("div");
+    box2.style.position = "relative";
+    box2.style.border = "1px solid #a0a0a0";
+    box2.style.left = "-.2em";
+    box2.style.top = "-.2em";
+    box2.style.background = "white";
+    box2.style.padding = ".3em .4em .3em .4em";
+    box2.style.fontStyle = "normal";
+    box2.onmouseout=auto_kill_doclink;
+    box2.parentID = id;
+
+    // Get the targets
+    var targets_elt = document.getElementById(targets_id);
+    var targets = targets_elt.getAttribute("targets");
+    var links = "";
+    target_list = targets.split(",");
+    for (var i=0; i" +
+               target[0] + "";
+    }
+  
+    // Put it all together.
+    elt.insertBefore(box1, elt.childNodes.item(0));
+    //box1.appendChild(box2);
+    box1.appendChild(shadow);
+    shadow.appendChild(box2);
+    box2.innerHTML =
+        "Which "+name+" do you want to see documentation for?" +
+        "";
+  }
+  return false;
+}
+
+function get_anchor() {
+          var href = location.href;
+          var start = href.indexOf("#")+1;
+          if ((start != 0) && (start != href.length))
+              return href.substring(start, href.length);
+      }
+function redirect_url(dottedName) {
+          // Scan through each element of the "pages" list, and check
+          // if "name" matches with any of them.
+          for (var i=0; i-m" or "-c";
+              // extract the  portion & compare it to dottedName.
+              var pagename = pages[i].substring(0, pages[i].length-2);
+              if (pagename == dottedName.substring(0,pagename.length)) {
+
+                  // We've found a page that matches `dottedName`;
+                  // construct its URL, using leftover `dottedName`
+                  // content to form an anchor.
+                  var pagetype = pages[i].charAt(pages[i].length-1);
+                  var url = pagename + ((pagetype=="m")?"-module.html":
+                                                        "-class.html");
+                  if (dottedName.length > pagename.length)
+                      url += "#" + dottedName.substring(pagename.length+1,
+                                                        dottedName.length);
+                  return url;
+              }
+          }
+      }

ADDED   applications/examples/static/epydoc/exceptions.Exception-class.html
Index: applications/examples/static/epydoc/exceptions.Exception-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/exceptions.Exception-class.html
@@ -0,0 +1,324 @@
+
+
+
+
+  exceptions.Exception
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        exceptions ::
+        Exception ::
+        Class Exception
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Exception


    
+
    +   object --+    
+            |    
+BaseException --+
+                |
+               Exception
+
    
+
+
    Known Subclasses:
    
+
    
+    StandardError,
+    Warning,
+    GeneratorExit,
+    StopIteration,
+    web2py.gluon.http.HTTP,
+    Queue.Empty,
+    Queue.Full,
+    HTMLParser.HTMLParseError,
+    web2py.gluon.rocket.BadRequest,
+    socket.error,
+    web2py.gluon.rocket.SocketClosed,
+    web2py.gluon.rocket.SocketTimeout,
+    web2py.gluon.rocket.BadRequest,
+    web2py.gluon.rocket.SocketClosed,
+    web2py.gluon.contrib.pymysql.err.MySQLError,
+    web2py.gluon.tools.Service.JsonRpcException,
+    web2py.gluon.tools.Service.JsonRpcException,
+    web2py.gluon.restricted.RestrictedError
+
    
+
+
    
+Common base class for all non-exit exceptions.

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(...)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __new__(T,
+        S,
+        ...)
    
+      Returns:
+a new object with type S, a subtype of T    		
+            
+            
+          
    
+      
+    
    
+    
    Inherited from BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(...)
+    
    (Constructor)
+  
    
+      		 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      BaseException.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __new__(T,
+        S,
+        ...)
+  
    
+      		 
+    
    
+  
+  
+  
    
+    
    Returns:
    
+        
    +a new object with type S, a subtype of T
+
+
    
+    
    Overrides:
+      BaseException.__new__
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/frames.html
Index: applications/examples/static/epydoc/frames.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/frames.html
@@ -0,0 +1,17 @@
+
+
+
+
+   web2py Web Framework 
+
+
+  
+    
+    
+  
+  
+
+

ADDED   applications/examples/static/epydoc/help.html
Index: applications/examples/static/epydoc/help.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/help.html
@@ -0,0 +1,278 @@
+
+
+
+
+  Help
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
     
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
     API Documentation 
    
+
+
     This document contains the API (Application Programming Interface)
+documentation for web2py Web Framework.  Documentation for the Python
+objects defined by the project is divided into separate pages for each
+package, module, and class.  The API documentation also includes two
+pages containing information about the project as a whole: a trees
+page, and an index page.  
    
+
+
     Object Documentation 
    
+
+  
    Each Package Documentation page contains: 
    
+  
      
+    
    •  A description of the package. 
      • 
+    
    •  A list of the modules and sub-packages contained by the
+    package.  
      • 
+    
    •  A summary of the classes defined by the package. 
      • 
+    
    •  A summary of the functions defined by the package. 
      • 
+    
    •  A summary of the variables defined by the package. 
      • 
+    
    •  A detailed description of each function defined by the
+    package. 
      • 
+    
    •  A detailed description of each variable defined by the
+    package. 
      • 
+  
    
+  
+  
    Each Module Documentation page contains:
    
+  
      
+    
    •  A description of the module. 
      • 
+    
    •  A summary of the classes defined by the module. 
      • 
+    
    •  A summary of the functions defined by the module. 
      • 
+    
    •  A summary of the variables defined by the module. 
      • 
+    
    •  A detailed description of each function defined by the
+    module. 
      • 
+    
    •  A detailed description of each variable defined by the
+    module. 
      • 
+  
    
+  
+  
    Each Class Documentation page contains: 
    
+  
      
+    
    •  A class inheritance diagram. 
      • 
+    
    •  A list of known subclasses. 
      • 
+    
    •  A description of the class. 
      • 
+    
    •  A summary of the methods defined by the class. 
      • 
+    
    •  A summary of the instance variables defined by the class. 
      • 
+    
    •  A summary of the class (static) variables defined by the
+    class. 
      •  
+    
    •  A detailed description of each method defined by the
+    class. 
      • 
+    
    •  A detailed description of each instance variable defined by the
+    class. 
      •  
+    
    •  A detailed description of each class (static) variable defined
+    by the class. 
      •  
+  
    
+
+
     Project Documentation 
    
+
+  
     The Trees page contains the module and class hierarchies: 
    
+  
      
+    
    •  The module hierarchy lists every package and module, with
+    modules grouped into packages.  At the top level, and within each
+    package, modules and sub-packages are listed alphabetically. 
      • 
+    
    •  The class hierarchy lists every class, grouped by base
+    class.  If a class has more than one base class, then it will be
+    listed under each base class.  At the top level, and under each base
+    class, classes are listed alphabetically. 
      • 
+  
    
+  
+  
     The Index page contains indices of terms and
+  identifiers: 
    
+  
      
+    
    •  The term index lists every term indexed by any object's
+    documentation.  For each term, the index provides links to each
+    place where the term is indexed. 
      • 
+    
    •  The identifier index lists the (short) name of every package,
+    module, class, method, function, variable, and parameter.  For each
+    identifier, the index provides a short description, and a link to
+    its documentation. 
      • 
+  
    
+
+
     The Table of Contents 
    
+
+
     The table of contents occupies the two frames on the left side of
+the window.  The upper-left frame displays the project
+contents, and the lower-left frame displays the module
+contents: 
    
+
+
+  
+    
+    
+  
+  
+    
+  
+
    
+       Project
    Contents
    ...    		
+      API
    Documentation
    Frame


    
+    
    
+      Module
    Contents
     
    ...
     
+    

    
+
+
     The project contents frame contains a list of all packages
+and modules that are defined by the project.  Clicking on an entry
+will display its contents in the module contents frame.  Clicking on a
+special entry, labeled "Everything," will display the contents of
+the entire project. 
    
+
+
     The module contents frame contains a list of every
+submodule, class, type, exception, function, and variable defined by a
+module or package.  Clicking on an entry will display its
+documentation in the API documentation frame.  Clicking on the name of
+the module, at the top of the frame, will display the documentation
+for the module itself. 
    
+
+
     The "frames" and "no frames" buttons below the top
+navigation bar can be used to control whether the table of contents is
+displayed or not. 
    
+
+
     The Navigation Bar 
    
+
+
     A navigation bar is located at the top and bottom of every page.
+It indicates what type of page you are currently viewing, and allows
+you to go to related pages.  The following table describes the labels
+on the navigation bar.  Note that not some labels (such as
+[Parent]) are not displayed on all pages. 
    
+
+
+
+  
+  
+  
+
+  
+      
+      
+  
+      
+      
+  
+      
+       
+  
+      
+      
+  
+      
+      
+  
+      
+      
+  
+      
+      
+
    LabelHighlighted when...Links to...
    [Parent](never highlighted) the parent of the current package 
    [Package]viewing a packagethe package containing the current object
+      
    [Module]viewing a modulethe module containing the current object
+      
    [Class]viewing a class the class containing the current object
    [Trees]viewing the trees page the trees page 
    [Index]viewing the index page the index page 
    [Help]viewing the help page the help page 
    
+
+
     The "show private" and "hide private" buttons below
+the top navigation bar can be used to control whether documentation
+for private objects is displayed.  Private objects are usually defined
+as objects whose (short) names begin with a single underscore, but do
+not end with an underscore.  For example, "_x",
+"__pprint", and "epydoc.epytext._tokenize"
+are private objects; but "re.sub",
+"__init__", and "type_" are not.  However,
+if a module defines the "__all__" variable, then its
+contents are used to decide which objects are private. 
    
+
+
     A timestamp below the bottom navigation bar indicates when each
+page was last updated. 
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:58 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/identifier-index.html
Index: applications/examples/static/epydoc/identifier-index.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/identifier-index.html
@@ -0,0 +1,5669 @@
+
+
+
+
+  Identifier Index
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
     
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    
+
    Identifier Index
    
+    		
+[
+ A
+ B
+ C
+ D
+ E
+ F
+ G
+ H
+ I
+ J
+ K
+ L
+ M
+ N
+ O
+ P
+ Q
+ R
+ S
+ T
+ U
+ V
+ W
+ X
+ Y
+ Z
+ _
+]
+
    
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    A
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    A
    
+(in web2py.gluon.html)    		alias()
    
+(in BaseAdapter)    		app_pack()
    
+(in web2py.gluon.admin)
    abspath()
    
+(in web2py.gluon.fileutils)    		alias()
    
+(in NoSQLAdapter)    		app_pack_compiled()
    
+(in web2py.gluon.admin)
    accepts()
    
+(in FORM)    		all_styles
    
+(in Highlighter)    		app_uninstall()
    
+(in web2py.gluon.admin)
    accepts()
    
+(in SQLFORM)    		all_url_schemes
    
+(in web2py.gluon.validators)    		append()
    
+(in DIV)
    accessible_query()
    
+(in Auth)    		ALLOW_NULL()
    
+(in BaseAdapter)    		append()
    
+(in BlockNode)
    acf()
    
+(in MapUrlOut)    		ALLOW_NULL()
    
+(in MSSQLAdapter)    		append()
    
+(in Content)
    acquire()
    
+(in Token)    		amfrpc()
    
+(in Service)    		appfactory()
    
+(in web2py.gluon.main)
    adapters
    
+(in sqlite3.dbapi2)    		amfrpc3()
    
+(in Service)    		archive()
    
+(in Crud)
    ADAPTERS
    
+(in web2py.gluon.dal)    		AND()
    
+(in BaseAdapter)    		arg0
    
+(in MapUrlIn)
    ADAPTERS
    
+(in web2py.gluon.reserved_sql_keywords)    		AND()
    
+(in CouchDBAdapter)    		AS()
    
+(in BaseAdapter)
    ADD()
    
+(in BaseAdapter)    		AND()
    
+(in GoogleDatastoreAdapter)    		AS()
    
+(in NoSQLAdapter)
    ADD()
    
+(in NoSQLAdapter)    		AND()
    
+(in NoSQLAdapter)    		as_dict()
    
+(in Row)
    add_group()
    
+(in Auth)    		apath()
    
+(in web2py.gluon.admin)    		as_dict()
    
+(in Rows)
    add_header()
    
+(in Headers)    		API_SERVER
    
+(in Recaptcha)    		as_list()
    
+(in Rows)
    add_membership()
    
+(in Auth)    		API_SSL_SERVER
    
+(in Recaptcha)    		Attachment
    
+(in Mail)
    add_path_first()
    
+(in web2py.gluon.admin)    		apilevel
    
+(in psycopg2)    		Auth
    
+(in web2py.gluon.tools)
    add_permission()
    
+(in Auth)    		apilevel
    
+(in sqlite3.dbapi2)    		AutocompleteWidget
    
+(in web2py.gluon.sqlhtml)
    addrow()
    
+(in web2py.gluon.tools)    		apilevel
    
+(in web2py.gluon.contrib.pymysql)    		autodetect_dict
    
+(in web2py.gluon.decoder)
    admin
    
+(in web2py.gluon)    		app_cleanup()
    
+(in web2py.gluon.admin)    		autoDetectXMLEncoding()
    
+(in web2py.gluon.decoder)
    AGGREGATE()
    
+(in BaseAdapter)    		app_compile()
    
+(in web2py.gluon.admin)    		automatic
    
+(in IS_IPV4)
    AGGREGATE()
    
+(in NoSQLAdapter)    		app_create()
    
+(in web2py.gluon.admin)    		 
    alert_dependency
    
+(in web2py.gluon.import_all)    		app_install()
    
+(in web2py.gluon.admin)    		 
    
+
    B
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    B
    
+(in web2py.gluon.html)    		begin()
    
+(in _BaseImporter)    		BooleanWidget
    
+(in web2py.gluon.sqlhtml)
    b()
    
+(in web2py.gluon.rocket)    		begin()
    
+(in _DateTrackerImporter)    		BR
    
+(in web2py.gluon.html)
    BadRequest
    
+(in web2py.gluon.rocket)    		BELONGS()
    
+(in BaseAdapter)    		bring_out_your_dead()
    
+(in ThreadPool)
    bar_decode_integer()
    
+(in web2py.gluon.dal)    		belongs()
    
+(in Expression)    		BUF_SIZE
    
+(in web2py.gluon.rocket)
    bar_decode_string()
    
+(in web2py.gluon.dal)    		BELONGS()
    
+(in GoogleDatastoreAdapter)    		build_acf()
    
+(in MapUrlOut)
    bar_encode()
    
+(in web2py.gluon.dal)    		BINARY
    
+(in psycopg2)    		build_environ()
    
+(in WSGIWorker)
    bar_escape()
    
+(in web2py.gluon.dal)    		BINARY
    
+(in web2py.gluon.contrib.pymysql)    		build_environment()
    
+(in web2py.gluon.compileapp)
    BASE_ENV
    
+(in web2py.gluon.rocket)    		Binary()
    
+(in web2py.gluon.contrib.pymysql)    		build_set()
    
+(in IS_IN_DB)
    base_modules
    
+(in web2py.gluon.import_all)    		BIT
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)    		bulk_insert()
    
+(in BaseAdapter)
    BaseAdapter
    
+(in web2py.gluon.dal)    		BLOB
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)    		bulk_insert()
    
+(in GoogleDatastoreAdapter)
    basic()
    
+(in Auth)    		BlockNode
    
+(in web2py.gluon.template)    		bulk_insert()
    
+(in Table)
    BEAUTIFY
    
+(in web2py.gluon.html)    		BODY
    
+(in web2py.gluon.html)    		BUTTON
    
+(in web2py.gluon.html)
    
+
    C
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    c_tokenizer()
    
+(in Highlighter)    		COMMA()
    
+(in CouchDBAdapter)    		convert_datetime()
    
+(in web2py.gluon.contrib.pymysql.converters)
    cache
    
+(in web2py.gluon)    		COMMA()
    
+(in GoogleDatastoreAdapter)    		convert_decimal()
    
+(in web2py.gluon.contrib.pymysql.converters)
    Cache
    
+(in web2py.gluon.cache)    		commit()
    
+(in BaseAdapter)    		convert_float()
    
+(in web2py.gluon.contrib.pymysql.converters)
    cache_stats_name
    
+(in CacheAbstract)    		commit()
    
+(in DAL)    		convert_int()
    
+(in web2py.gluon.contrib.pymysql.converters)
    CacheAbstract
    
+(in web2py.gluon.cache)    		commit()
    
+(in NoSQLAdapter)    		convert_long()
    
+(in web2py.gluon.contrib.pymysql.converters)
    CacheInRam
    
+(in web2py.gluon.cache)    		commit_on_alter_table
    
+(in BaseAdapter)    		convert_mysql_timestamp()
    
+(in web2py.gluon.contrib.pymysql.converters)
    CacheOnDisk
    
+(in web2py.gluon.cache)    		commit_on_alter_table
    
+(in FireBirdAdapter)    		convert_set()
    
+(in web2py.gluon.contrib.pymysql.converters)
    call_or_redirect()
    
+(in web2py.gluon.tools)    		commit_on_alter_table
    
+(in MySQLAdapter)    		convert_time()
    
+(in web2py.gluon.contrib.pymysql.converters)
    CALLABLETYPES
    
+(in web2py.gluon.dal)    		commit_on_alter_table
    
+(in OracleAdapter)    		convert_timedelta()
    
+(in web2py.gluon.contrib.pymysql.converters)
    callback()
    
+(in AutocompleteWidget)    		commit_prepared()
    
+(in BaseAdapter)    		converters
    
+(in sqlite3.dbapi2)
    callback()
    
+(in web2py.gluon.tools)    		commit_prepared()
    
+(in MySQLAdapter)    		converters
    
+(in web2py.gluon.contrib.pymysql)
    candidate
    
+(in web2py.gluon.import_all)    		commit_prepared()
    
+(in NoSQLAdapter)    		copystream()
    
+(in web2py.gluon.fileutils)
    cas_login()
    
+(in Auth)    		commit_prepared()
    
+(in PostgreSQLAdapter)    		copystream_progress()
    
+(in web2py.gluon.main)
    cas_validate()
    
+(in Auth)    		COMMON
    
+(in web2py.gluon.reserved_sql_keywords)    		CouchDBAdapter
    
+(in web2py.gluon.dal)
    CAT
    
+(in web2py.gluon.html)    		communicate()
    
+(in web2py.gluon.debug)    		count()
    
+(in BaseAdapter)
    CENTER
    
+(in web2py.gluon.html)    		compile2()
    
+(in web2py.gluon.restricted)    		count()
    
+(in CouchDBAdapter)
    cfs
    
+(in web2py.gluon)    		compile_application()
    
+(in web2py.gluon.compileapp)    		count()
    
+(in Field)
    cfs
    
+(in web2py.gluon.cfs)    		compile_controllers()
    
+(in web2py.gluon.compileapp)    		count()
    
+(in GoogleDatastoreAdapter)
    cfs_lock
    
+(in web2py.gluon.cfs)    		compile_models()
    
+(in web2py.gluon.compileapp)    		count()
    
+(in MongoDBAdapter)
    change_password()
    
+(in Auth)    		compile_regex()
    
+(in web2py.gluon.rewrite)    		count()
    
+(in Set)
    change_style()
    
+(in Highlighter)    		compile_views()
    
+(in web2py.gluon.compileapp)    		create()
    
+(in Crud)
    CHAR
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)    		compileapp
    
+(in web2py.gluon)    		create_missing_app_folders()
    
+(in web2py.gluon.admin)
    chdir()
    
+(in Web2pyService)    		completion()
    
+(in web2py.gluon.tools)    		create_missing_folders()
    
+(in web2py.gluon.admin)
    check_credentials()
    
+(in web2py.gluon.fileutils)    		compute_uuid()
    
+(in Request)    		create_sequence_and_triggers()
    
+(in BaseAdapter)
    check_new_version()
    
+(in web2py.gluon.admin)    		concat_add()
    
+(in BaseAdapter)    		create_sequence_and_triggers()
    
+(in FireBirdAdapter)
    check_reserved_keyword()
    
+(in DAL)    		concat_add()
    
+(in MySQLAdapter)    		create_sequence_and_triggers()
    
+(in IngresAdapter)
    CheckboxesWidget
    
+(in web2py.gluon.sqlhtml)    		concat_add()
    
+(in NoSQLAdapter)    		create_sequence_and_triggers()
    
+(in NoSQLAdapter)
    checkTaskBar()
    
+(in web2pyDialog)    		Connect()
    
+(in web2py.gluon.contrib.pymysql)    		create_sequence_and_triggers()
    
+(in OracleAdapter)
    CherryPyWSGIServer()
    
+(in web2py.gluon.rocket)    		connect()
    
+(in Session)    		create_sequence_and_triggers()
    
+(in PostgreSQLAdapter)
    ChunkedReader
    
+(in web2py.gluon.rocket)    		connect_pages()
    
+(in web2pyDialog)    		create_sequence_and_triggers()
    
+(in SAPDBAdapter)
    cleanpath()
    
+(in web2py.gluon.fileutils)    		Connection
    
+(in web2py.gluon.rocket)    		create_table()
    
+(in BaseAdapter)
    CLEANUP
    
+(in web2py.gluon.validators)    		ConnectionPool
    
+(in web2py.gluon.dal)    		create_table()
    
+(in CouchDBAdapter)
    cleanup()
    
+(in web2py.gluon.dal)    		console()
    
+(in web2py.gluon.widget)    		create_table()
    
+(in GoogleDatastoreAdapter)
    clear()
    
+(in CacheAbstract)    		constants
    
+(in web2py.gluon.contrib.pymysql)    		createform()
    
+(in SQLFORM)
    clear()
    
+(in CacheInRam)    		constraint_name()
    
+(in BaseAdapter)    		crondance()
    
+(in web2py.gluon.newcron)
    clear()
    
+(in CacheOnDisk)    		constraint_name()
    
+(in NoSQLAdapter)    		cronlauncher
    
+(in web2py.gluon.newcron)
    clear_content()
    
+(in Content)    		constraint_name()
    
+(in OracleAdapter)    		Crud
    
+(in web2py.gluon.tools)
    client_addr
    
+(in Connection)    		CONTAINS()
    
+(in BaseAdapter)    		CRYPT
    
+(in web2py.gluon.validators)
    client_port
    
+(in Connection)    		contains()
    
+(in Expression)    		csv()
    
+(in web2py.gluon.serializers)
    close()
    
+(in BaseAdapter)    		CONTAINS()
    
+(in GoogleDatastoreAdapter)    		csv()
    
+(in Service)
    close()
    
+(in DatabaseStoredFile)    		CONTAINS()
    
+(in PostgreSQLAdapter)    		ctokens
    
+(in web2py.gluon.utils)
    close()
    
+(in NoSQLAdapter)    		Content
    
+(in web2py.gluon.template)    		CubridAdapter
    
+(in web2py.gluon.dal)
    close()
    
+(in Connection)    		CONTENT_TYPE
    
+(in web2py.gluon.contenttype)    		current
    
+(in web2py.gluon)
    close_all_instances()
    
+(in ConnectionPool)    		contenttype
    
+(in web2py.gluon)    		current
    
+(in web2py.gluon.globals)
    COALESCE_ZERO()
    
+(in BaseAdapter)    		contenttype()
    
+(in web2py.gluon.contenttype)    		current
    
+(in web2py.gluon.tools)
    coalesce_zero()
    
+(in Expression)    		contributed_modules
    
+(in web2py.gluon.import_all)    		custom_import
    
+(in web2py.gluon)
    CODE
    
+(in web2py.gluon.html)    		conversions
    
+(in web2py.gluon.contrib.pymysql.converters)    		custom_import_install()
    
+(in web2py.gluon.custom_import)
    COL
    
+(in web2py.gluon.html)    		convert_bit()
    
+(in web2py.gluon.contrib.pymysql.converters)    		custom_json()
    
+(in web2py.gluon.serializers)
    COLGROUP
    
+(in web2py.gluon.html)    		convert_characters()
    
+(in web2py.gluon.contrib.pymysql.converters)    		 
    COMMA()
    
+(in BaseAdapter)    		convert_date()
    
+(in web2py.gluon.contrib.pymysql.converters)    		 
    
+
    D
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    dal
    
+(in web2py.gluon)    		DEFAULT()
    
+(in web2py.gluon.dal)    		distributed_transaction_begin()
    
+(in MySQLAdapter)
    DAL
    
+(in web2py.gluon.dal)    		DEFAULT()
    
+(in web2py.gluon.tools)    		distributed_transaction_begin()
    
+(in NoSQLAdapter)
    data_type
    
+(in GAEDecimalProperty)    		DEFAULT_CHUNK_SIZE
    
+(in web2py.gluon.streamer)    		distributed_transaction_begin()
    
+(in PostgreSQLAdapter)
    DatabaseErrorDEFAULT_LISTEN_QUEUE_SIZE
    
+(in web2py.gluon.rocket)    		distributed_transaction_commit()
    
+(in DAL)
    DatabaseError
    
+(in web2py.gluon.contrib.pymysql.err)    		DEFAULT_MAX_THREADS
    
+(in web2py.gluon.rocket)    		DIV
    
+(in web2py.gluon.html)
    DatabaseStoredFile
    
+(in web2py.gluon.dal)    		DEFAULT_MIN_THREADS
    
+(in web2py.gluon.rocket)    		DIV()
    
+(in BaseAdapter)
    DataErrorDEFAULT_PASSWORD_DISPLAY
    
+(in PasswordWidget)    		DIV()
    
+(in NoSQLAdapter)
    DataError
    
+(in web2py.gluon.contrib.pymysql.err)    		DEFAULT_TIME_EXPIRE
    
+(in web2py.gluon.cache)    		DOUBLE
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)
    dateDEFAULT_WIDTH
    
+(in UploadWidget)    		DoubleWidget
    
+(in web2py.gluon.sqlhtml)
    DATE
    
+(in web2py.gluon.contrib.pymysql)    		DEFAULTS
    
+(in web2py.gluon.rocket)    		download()
    
+(in Response)
    DATE
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)    		define_table()
    
+(in DAL)    		driver
    
+(in BaseAdapter)
    datetimedefine_tables()
    
+(in Auth)    		driver
    
+(in CubridAdapter)
    DATETIME
    
+(in psycopg2)    		defined_status
    
+(in web2py.gluon.http)    		driver
    
+(in DB2Adapter)
    DATETIME
    
+(in web2py.gluon.contrib.pymysql)    		del_group()
    
+(in Auth)    		driver
    
+(in FireBirdAdapter)
    DATETIME
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)    		del_membership()
    
+(in Auth)    		driver
    
+(in InformixAdapter)
    DatetimeWidget
    
+(in web2py.gluon.sqlhtml)    		del_permission()
    
+(in Auth)    		driver
    
+(in IngresAdapter)
    DateWidget
    
+(in web2py.gluon.sqlhtml)    		delete()
    
+(in BaseAdapter)    		driver
    
+(in JDBCSQLiteAdapter)
    day()
    
+(in Expression)    		delete()
    
+(in CouchDBAdapter)    		driver
    
+(in MSSQLAdapter)
    DB2
    
+(in web2py.gluon.reserved_sql_keywords)    		delete()
    
+(in GoogleDatastoreAdapter)    		driver
    
+(in OracleAdapter)
    DB2Adapter
    
+(in web2py.gluon.dal)    		delete()
    
+(in MongoDBAdapter)    		driver
    
+(in SAPDBAdapter)
    dbapi2
    
+(in sqlite3)    		delete()
    
+(in Set)    		driver
    
+(in TeradataAdapter)
    DBAPISet
    
+(in web2py.gluon.contrib.pymysql)    		delete()
    
+(in Crud)    		drivers
    
+(in web2py.gluon.dal)
    debug
    
+(in web2py.gluon)    		DELETE_FILE
    
+(in UploadWidget)    		drivers
    
+(in web2py.gluon.sql)
    debugger
    
+(in web2py.gluon.debug)    		delete_uploaded_files()
    
+(in Set)    		drop()
    
+(in BaseAdapter)
    DECIMAL
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)    		demo()
    
+(in web2py.gluon.rocket)    		drop()
    
+(in NoSQLAdapter)
    DecimalWidget
    
+(in web2py.gluon.sqlhtml)    		demo_app()
    
+(in web2py.gluon.rocket)    		drop()
    
+(in Table)
    decode()
    
+(in lazyT)    		die()
    
+(in web2py.gluon.shell)    		DSTDIFF
    
+(in psycopg2.tz)
    decoder
    
+(in web2py.gluon)    		dirs
    
+(in web2py.gluon.import_all)    		DSTOFFSET
    
+(in psycopg2.tz)
    decoder()
    
+(in web2py.gluon.decoder)    		distributed_transaction_begin()
    
+(in BaseAdapter)    		dynamic_resize()
    
+(in ThreadPool)
    decoders
    
+(in web2py.gluon.contrib.pymysql.converters)    		distributed_transaction_begin()
    
+(in DAL)    		 
    
+
    E
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    element()
    
+(in DIV)    		error()
    
+(in web2pyDialog)    		execute()
    
+(in DB2Adapter)
    elements()
    
+(in DIV)    		escape_bool()
    
+(in web2py.gluon.contrib.pymysql.converters)    		execute()
    
+(in InformixAdapter)
    elements()
    
+(in MARKMIN)    		escape_date()
    
+(in web2py.gluon.contrib.pymysql.converters)    		execute()
    
+(in JDBCSQLiteAdapter)
    elements()
    
+(in XML)    		escape_datetime()
    
+(in web2py.gluon.contrib.pymysql.converters)    		execute()
    
+(in MSSQL2Adapter)
    EM
    
+(in web2py.gluon.html)    		escape_decimal()
    
+(in web2py.gluon.contrib.pymysql.converters)    		execute()
    
+(in NoSQLAdapter)
    EMBED
    
+(in web2py.gluon.html)    		escape_dict()
    
+(in web2py.gluon.contrib.pymysql.converters)    		execute()
    
+(in OracleAdapter)
    embed64()
    
+(in web2py.gluon.html)    		escape_float()
    
+(in web2py.gluon.contrib.pymysql.converters)    		execute_from_command_line()
    
+(in web2py.gluon.shell)
    emit()
    
+(in NullHandler)    		escape_item()
    
+(in web2py.gluon.contrib.pymysql.converters)    		executesql()
    
+(in DAL)
    encode()
    
+(in lazyT)    		ESCAPE_MAP
    
+(in web2py.gluon.contrib.pymysql.converters)    		exists()
    
+(in DatabaseStoredFile)
    encoders
    
+(in web2py.gluon.contrib.pymysql.converters)    		escape_None()
    
+(in web2py.gluon.contrib.pymysql.converters)    		expand()
    
+(in BaseAdapter)
    end()
    
+(in _BaseImporter)    		escape_object()
    
+(in web2py.gluon.contrib.pymysql.converters)    		expand()
    
+(in CouchDBAdapter)
    end()
    
+(in _DateTrackerImporter)    		ESCAPE_REGEX
    
+(in web2py.gluon.contrib.pymysql.converters)    		expand()
    
+(in GoogleDatastoreAdapter)
    ENDSWITH()
    
+(in BaseAdapter)    		escape_sequence()
    
+(in web2py.gluon.contrib.pymysql.converters)    		export_to_csv_file()
    
+(in DAL)
    endswith()
    
+(in Expression)    		escape_set()
    
+(in web2py.gluon.contrib.pymysql.converters)    		export_to_csv_file()
    
+(in Rows)
    ENDSWITH()
    
+(in NoSQLAdapter)    		escape_string()
    
+(in web2py.gluon.contrib.pymysql.converters)    		Expression
    
+(in web2py.gluon.dal)
    ENDSWITH()
    
+(in PostgreSQLAdapter)    		escape_struct_time()
    
+(in web2py.gluon.contrib.pymysql.converters)    		extcron
    
+(in web2py.gluon.newcron)
    ENUM
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)    		escape_time()
    
+(in web2py.gluon.contrib.pymysql.converters)    		extend()
    
+(in BlockNode)
    env()
    
+(in web2py.gluon.shell)    		escape_timedelta()
    
+(in web2py.gluon.contrib.pymysql.converters)    		extend()
    
+(in Content)
    environ_aux()
    
+(in web2py.gluon.main)    		escape_unicode()
    
+(in web2py.gluon.contrib.pymysql.converters)    		extend()
    
+(in TemplateParser)
    EQ()
    
+(in BaseAdapter)    		escape_unicode()
    
+(in web2py.gluon.validators)    		EXTRACT()
    
+(in BaseAdapter)
    EQ()
    
+(in CouchDBAdapter)    		ExceptionEXTRACT()
    
+(in MSSQLAdapter)
    EQ()
    
+(in GoogleDatastoreAdapter)    		exclude()
    
+(in Rows)    		EXTRACT()
    
+(in NoSQLAdapter)
    Errorexec_environment()
    
+(in web2py.gluon.shell)    		EXTRACT()
    
+(in SQLiteAdapter)
    Error
    
+(in web2py.gluon.contrib.pymysql.err)    		exec_pythonrc()
    
+(in web2py.gluon.shell)    		 
    error()
    
+(in Service)    		execute()
    
+(in BaseAdapter)    		 
    
+
    F
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    factory()
    
+(in SQLFORM)    		file_open()
    
+(in CouchDBAdapter)    		FixedOffsetTimezone
    factory()
    
+(in SQLFORM)    		file_open()
    
+(in GoogleDatastoreAdapter)    		flatten()
    
+(in DIV)
    fetch()
    
+(in web2py.gluon.tools)    		file_open()
    
+(in UseDatabaseStoredFile)    		flatten()
    
+(in MARKMIN)
    Field
    
+(in web2py.gluon.dal)    		fileno
    
+(in Connection)    		flatten()
    
+(in XML)
    FIELD_TYPE
    
+(in web2py.gluon.contrib.pymysql.constants)    		files
    
+(in web2py.gluon.import_all)    		FLOAT
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)
    FIELDKEY_DELETE_RECORD
    
+(in SQLFORM)    		fileutils
    
+(in web2py.gluon)    		flush()
    
+(in Pipe)
    FIELDNAME_REQUEST_DELETE
    
+(in SQLFORM)    		FileWrapper
    
+(in web2py.gluon.rocket)    		force()
    
+(in translator)
    FIELDSET
    
+(in web2py.gluon.html)    		filter_err()
    
+(in web2py.gluon.rewrite)    		forget()
    
+(in Session)
    file_close()
    
+(in BaseAdapter)    		filter_tenant()
    
+(in BaseAdapter)    		FORM
    
+(in web2py.gluon.html)
    file_close()
    
+(in CouchDBAdapter)    		filter_url()
    
+(in web2py.gluon.rewrite)    		formatter()
    
+(in Field)
    file_close()
    
+(in GoogleDatastoreAdapter)    		find()
    
+(in Rows)    		formatter()
    
+(in IS_DATE)
    file_close()
    
+(in UseDatabaseStoredFile)    		find_or_make_work_folder()
    
+(in ConnectionPool)    		formatter()
    
+(in IS_DATETIME)
    file_delete()
    
+(in BaseAdapter)    		findT()
    
+(in web2py.gluon.languages)    		formatter()
    
+(in IS_DECIMAL_IN_RANGE)
    file_delete()
    
+(in UseDatabaseStoredFile)    		FIREBIRD
    
+(in web2py.gluon.reserved_sql_keywords)    		formatter()
    
+(in IS_EMPTY_OR)
    file_exists()
    
+(in BaseAdapter)    		FIREBIRD_NONRESERVED
    
+(in web2py.gluon.reserved_sql_keywords)    		formatter()
    
+(in IS_FLOAT_IN_RANGE)
    file_exists()
    
+(in CouchDBAdapter)    		FireBirdAdapter
    
+(in web2py.gluon.dal)    		formatter()
    
+(in Validator)
    file_exists()
    
+(in GoogleDatastoreAdapter)    		FireBirdEmbeddedAdapter
    
+(in web2py.gluon.dal)    		FormWidget
    
+(in web2py.gluon.sqlhtml)
    file_exists()
    
+(in UseDatabaseStoredFile)    		first()
    
+(in Rows)    		frameset
    
+(in HTML)
    file_open()
    
+(in BaseAdapter)    		fix_newlines()
    
+(in web2py.gluon.fileutils)    		frameset
    
+(in XHTML)
    
+
    G
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    GAEDecimalProperty
    
+(in web2py.gluon.dal)    		get_effective_router()
    
+(in web2py.gluon.rewrite)    		getfirst()
    
+(in Storage)
    GAEF
    
+(in web2py.gluon.dal)    		get_format()
    
+(in Crud)    		getlast()
    
+(in Storage)
    GE()
    
+(in BaseAdapter)    		get_method()
    
+(in web2py.gluon.rocket)    		getlist()
    
+(in Storage)
    GE()
    
+(in GoogleDatastoreAdapter)    		get_or_create_user()
    
+(in Auth)    		global_settings
    
+(in web2py.gluon.settings)
    GENERIC_DESCRIPTION
    
+(in UploadWidget)    		get_parsed()
    
+(in web2py.gluon.template)    		globals
    
+(in web2py.gluon)
    geocode()
    
+(in web2py.gluon.tools)    		get_possible_languages()
    
+(in translator)    		gluon
    
+(in web2py)
    GEOMETRY
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)    		get_query()
    
+(in Crud)    		GoogleDatastoreAdapter
    
+(in web2py.gluon.dal)
    get()
    
+(in Headers)    		get_session()
    
+(in web2py.gluon.fileutils)    		GoogleSQLAdapter
    
+(in web2py.gluon.dal)
    get_all()
    
+(in Headers)    		get_table()
    
+(in BaseAdapter)    		groups()
    
+(in Auth)
    get_client()
    
+(in web2py.gluon.main)    		get_usage()
    
+(in web2py.gluon.shell)    		grow()
    
+(in ThreadPool)
    get_client_info()
    
+(in web2py.gluon.contrib.pymysql)    		get_value_for_datastore()
    
+(in GAEDecimalProperty)    		GT()
    
+(in BaseAdapter)
    get_digest()
    
+(in web2py.gluon.utils)    		getcfs()
    
+(in web2py.gluon.cfs)    		GT()
    
+(in GoogleDatastoreAdapter)
    
+
    H
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    H1
    
+(in web2py.gluon.html)    		handler()
    
+(in web2py.gluon.xmlrpc)    		highlight()
    
+(in Highlighter)
    H2
    
+(in web2py.gluon.html)    		hardcron
    
+(in web2py.gluon.newcron)    		highlight()
    
+(in web2py.gluon.highlight)
    H3
    
+(in web2py.gluon.html)    		harg0
    
+(in MapUrlIn)    		Highlighter
    
+(in web2py.gluon.highlight)
    H4
    
+(in web2py.gluon.html)    		has_key()
    
+(in Headers)    		hmac_hash()
    
+(in web2py.gluon.utils)
    H5
    
+(in web2py.gluon.html)    		has_membership()
    
+(in Auth)    		hour()
    
+(in Expression)
    H6
    
+(in web2py.gluon.html)    		has_options()
    
+(in OptionsWidget)    		HR
    
+(in web2py.gluon.html)
    handle_charref()
    
+(in web2pyHTMLParser)    		has_permission()
    
+(in Auth)    		html
    
+(in web2py.gluon)
    handle_charref()
    
+(in XssCleaner)    		has_permission()
    
+(in Crud)    		HTML
    
+(in web2py.gluon.html)
    handle_comment()
    
+(in XssCleaner)    		has_ssl
    
+(in web2py.gluon.rocket)    		html5
    
+(in HTML)
    handle_data()
    
+(in web2pyHTMLParser)    		have_portalocker
    
+(in web2py.gluon.dal)    		html_tokenizer()
    
+(in Highlighter)
    handle_data()
    
+(in XssCleaner)    		have_serializers
    
+(in web2py.gluon.dal)    		http
    
+(in web2py.gluon)
    handle_endtag()
    
+(in web2pyHTMLParser)    		have_validators
    
+(in web2py.gluon.dal)    		HTTP
    
+(in web2py.gluon.http)
    handle_endtag()
    
+(in XssCleaner)    		HEAD
    
+(in web2py.gluon.html)    		HTTP_METHODS
    
+(in web2py.gluon.rocket)
    handle_entityref()
    
+(in web2pyHTMLParser)    		HEADER_RESPONSE
    
+(in web2py.gluon.rocket)    		http_schemes
    
+(in web2py.gluon.validators)
    handle_entityref()
    
+(in XssCleaner)    		Headers
    
+(in web2py.gluon.rocket)    		HTTP_SERVER_SOFTWARE
    
+(in web2py.gluon.rocket)
    handle_starttag()
    
+(in web2pyHTMLParser)    		hidden_fields()
    
+(in FORM)    		HttpServer
    
+(in web2py.gluon.main)
    handle_starttag()
    
+(in XssCleaner)    		highlight
    
+(in web2py.gluon)    		 
    
+
    I
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    I
    
+(in web2py.gluon.html)    		instances
    
+(in PluginManager)    		is_gae
    
+(in web2py.gluon.languages)
    ID_DELETE_SUFFIX
    
+(in UploadWidget)    		INT24
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)    		IS_GENERIC_URL
    
+(in web2py.gluon.validators)
    id_group()
    
+(in Auth)    		int2uuid()
    
+(in web2py.gluon.dal)    		IS_HTTP_URL
    
+(in web2py.gluon.validators)
    ID_LABEL_SUFFIX
    
+(in SQLFORM)    		IntegerWidget
    
+(in web2py.gluon.sqlhtml)    		IS_IMAGE
    
+(in web2py.gluon.validators)
    ID_ROW_SUFFIX
    
+(in SQLFORM)    		integrity_error()
    
+(in BaseAdapter)    		is_image()
    
+(in UploadWidget)
    IFRAME
    
+(in web2py.gluon.html)    		integrity_error_class()
    
+(in BaseAdapter)    		is_impersonating()
    
+(in Auth)
    IGNORE_ERRORS_ON_CLOSE
    
+(in web2py.gluon.rocket)    		integrity_error_class()
    
+(in InformixAdapter)    		IS_IN_DB
    
+(in web2py.gluon.validators)
    IMG
    
+(in web2py.gluon.html)    		integrity_error_class()
    
+(in IngresAdapter)    		IS_IN_SET
    
+(in web2py.gluon.validators)
    impersonate()
    
+(in Auth)    		integrity_error_class()
    
+(in MSSQLAdapter)    		IS_IN_SUBSET
    
+(in web2py.gluon.validators)
    import_all
    
+(in web2py.gluon)    		integrity_error_class()
    
+(in NoSQLAdapter)    		IS_INT_IN_RANGE
    
+(in web2py.gluon.validators)
    import_from_csv_file()
    
+(in DAL)    		IntegrityErrorIS_IPV4
    
+(in web2py.gluon.validators)
    import_from_csv_file()
    
+(in Table)    		IntegrityError
    
+(in web2py.gluon.contrib.pymysql.err)    		is_jdbc
    
+(in web2py.gluon.dal)
    import_table_definitions()
    
+(in DAL)    		InterfaceErroris_jython
    
+(in web2py.gluon.compileapp)
    include()
    
+(in TemplateParser)    		InterfaceError
    
+(in web2py.gluon.contrib.pymysql.err)    		IS_JYTHON
    
+(in web2py.gluon.rocket)
    increment()
    
+(in CacheAbstract)    		InternalErrorIS_LENGTH
    
+(in web2py.gluon.validators)
    increment()
    
+(in CacheInRam)    		InternalError
    
+(in web2py.gluon.contrib.pymysql.err)    		IS_LIST_OF
    
+(in web2py.gluon.validators)
    increment()
    
+(in CacheOnDisk)    		INTERVAL
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)    		is_logged_in()
    
+(in Auth)
    INFINITY
    
+(in web2py.gluon.dal)    		INVERT()
    
+(in BaseAdapter)    		IS_LOWER
    
+(in web2py.gluon.validators)
    INFORMIX
    
+(in web2py.gluon.reserved_sql_keywords)    		INVERT()
    
+(in GoogleDatastoreAdapter)    		IS_MATCH
    
+(in web2py.gluon.validators)
    InformixAdapter
    
+(in web2py.gluon.dal)    		IO
    
+(in web2py.gluon.widget)    		is_new()
    
+(in Session)
    INGRES
    
+(in web2py.gluon.reserved_sql_keywords)    		IS_ALPHANUMERIC
    
+(in web2py.gluon.validators)    		IS_NOT_EMPTY
    
+(in web2py.gluon.validators)
    INGRES_SEQNAME
    
+(in web2py.gluon.dal)    		IS_DATE
    
+(in web2py.gluon.validators)    		IS_NOT_IN_DB
    
+(in web2py.gluon.validators)
    IngresAdapter
    
+(in web2py.gluon.dal)    		IS_DATE_IN_RANGE
    
+(in web2py.gluon.validators)    		IS_SLUG
    
+(in web2py.gluon.validators)
    IngresUnicodeAdapter
    
+(in web2py.gluon.dal)    		IS_DATETIME
    
+(in web2py.gluon.validators)    		IS_STRONG
    
+(in web2py.gluon.validators)
    initialize_urandom()
    
+(in web2py.gluon.utils)    		IS_DATETIME_IN_RANGE
    
+(in web2py.gluon.validators)    		IS_TIME
    
+(in web2py.gluon.validators)
    INPUT
    
+(in web2py.gluon.html)    		IS_DECIMAL_IN_RANGE
    
+(in web2py.gluon.validators)    		is_tracking_changes()
    
+(in web2py.gluon.custom_import)
    insert()
    
+(in BaseAdapter)    		IS_EMAIL
    
+(in web2py.gluon.validators)    		IS_UPLOAD_FILENAME
    
+(in web2py.gluon.validators)
    insert()
    
+(in CouchDBAdapter)    		is_empty()
    
+(in web2py.gluon.validators)    		IS_UPPER
    
+(in web2py.gluon.validators)
    insert()
    
+(in GoogleDatastoreAdapter)    		IS_EMPTY_OR
    
+(in web2py.gluon.validators)    		IS_URL
    
+(in web2py.gluon.validators)
    insert()
    
+(in MongoDBAdapter)    		IS_EQUAL_TO
    
+(in web2py.gluon.validators)    		isempty()
    
+(in Set)
    insert()
    
+(in Table)    		is_expired()
    
+(in Session)    		isodatetime
    
+(in IS_DATETIME)
    insert()
    
+(in DIV)    		IS_EXPR
    
+(in web2py.gluon.validators)    		items()
    
+(in Headers)
    insert()
    
+(in Content)    		IS_FLOAT_IN_RANGE
    
+(in web2py.gluon.validators)    		 
    install_as_MySQLdb()
    
+(in web2py.gluon.contrib.pymysql)    		is_gae
    
+(in web2py.gluon.compileapp)    		 
    
+
    J
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    JDBCPOSTGRESQL
    
+(in web2py.gluon.reserved_sql_keywords)    		JOIN()
    
+(in BaseAdapter)    		json()
    
+(in web2py.gluon.serializers)
    JDBCPostgreSQLAdapter
    
+(in web2py.gluon.dal)    		join()
    
+(in web2py.gluon.html)    		json()
    
+(in Service)
    JDBCSQLITE
    
+(in web2py.gluon.reserved_sql_keywords)    		json()
    
+(in Rows)    		jsonrpc()
    
+(in Service)
    JDBCSQLiteAdapter
    
+(in web2py.gluon.dal)    		json()
    
+(in Response)    		JsonRpcException
    
+(in Service)
    
+
    K
    		
+
+
+
+
+
+
+
+
+
+
+
+
    k
    
+(in psycopg2)    		keys()
    
+(in PluginManager)    		 
    keys()
    
+(in Headers)    		kill()
    
+(in Worker)    		 
    
+
    L
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    LABEL
    
+(in web2py.gluon.html)    		LI
    
+(in web2py.gluon.html)    		log_execute()
    
+(in BaseAdapter)
    label_split_regex
    
+(in web2py.gluon.validators)    		LIKE()
    
+(in BaseAdapter)    		log_execute()
    
+(in NoSQLAdapter)
    languages
    
+(in web2py.gluon)    		like()
    
+(in Expression)    		LOG_LINE
    
+(in web2py.gluon.rocket)
    last()
    
+(in Rows)    		LIKE()
    
+(in NoSQLAdapter)    		logger
    
+(in web2py.gluon.cache)
    lastrowid()
    
+(in BaseAdapter)    		LIKE()
    
+(in PostgreSQLAdapter)    		logger
    
+(in web2py.gluon.compileapp)
    lastrowid()
    
+(in DB2Adapter)    		LINK
    
+(in web2py.gluon.html)    		logger
    
+(in web2py.gluon.dal)
    lastrowid()
    
+(in FireBirdAdapter)    		List
    
+(in web2py.gluon.storage)    		logger
    
+(in web2py.gluon.debug)
    lastrowid()
    
+(in InformixAdapter)    		listdir()
    
+(in web2py.gluon.fileutils)    		logger
    
+(in web2py.gluon.main)
    lastrowid()
    
+(in IngresAdapter)    		Listener
    
+(in web2py.gluon.rocket)    		logger
    
+(in web2py.gluon.newcron)
    lastrowid()
    
+(in MSSQLAdapter)    		ListWidget
    
+(in web2py.gluon.sqlhtml)    		logger
    
+(in web2py.gluon.portalocker)
    lastrowid()
    
+(in MySQLAdapter)    		load()
    
+(in RestrictedError)    		logger
    
+(in web2py.gluon.restricted)
    lastrowid()
    
+(in NoSQLAdapter)    		load()
    
+(in TicketStorage)    		logger
    
+(in web2py.gluon.rewrite)
    lastrowid()
    
+(in OracleAdapter)    		load()
    
+(in web2py.gluon.rewrite)    		logger
    
+(in web2py.gluon.shell)
    lastrowid()
    
+(in PostgreSQLAdapter)    		load_routers()
    
+(in web2py.gluon.rewrite)    		logger
    
+(in web2py.gluon.tools)
    lastrowid()
    
+(in SAPDBAdapter)    		load_storage()
    
+(in web2py.gluon.storage)    		logger
    
+(in web2py.gluon.utils)
    lastrowid()
    
+(in SQLiteAdapter)    		LoadFactory
    
+(in web2py.gluon.compileapp)    		logger
    
+(in web2py.gluon.widget)
    launch()
    
+(in hardcron)    		LOCAL
    
+(in psycopg2.tz)    		login()
    
+(in Auth)
    lazyT
    
+(in web2py.gluon.languages)    		local_import_aux()
    
+(in web2py.gluon.compileapp)    		login_bare()
    
+(in Auth)
    lazyT_pickle()
    
+(in web2py.gluon.languages)    		localhost
    
+(in IS_IPV4)    		logout()
    
+(in Auth)
    lazyT_unpickle()
    
+(in web2py.gluon.languages)    		LocalTimezonelogpath
    
+(in web2py.gluon.main)
    LE()
    
+(in BaseAdapter)    		lock()
    
+(in web2py.gluon.portalocker)    		LONG
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)
    LE()
    
+(in GoogleDatastoreAdapter)    		LOCK_EX
    
+(in web2py.gluon.portalocker)    		LONG_BLOB
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)
    LEFT_JOIN()
    
+(in BaseAdapter)    		LOCK_NB
    
+(in web2py.gluon.portalocker)    		LONGLONG
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)
    LEFT_JOIN()
    
+(in DB2Adapter)    		LOCK_SH
    
+(in web2py.gluon.portalocker)    		LOWER()
    
+(in BaseAdapter)
    LEFT_JOIN()
    
+(in IngresAdapter)    		locker
    
+(in CacheInRam)    		lower()
    
+(in Expression)
    LEFT_JOIN()
    
+(in MSSQLAdapter)    		log
    
+(in web2py.gluon.rocket)    		LOWER()
    
+(in NoSQLAdapter)
    LEFT_JOIN()
    
+(in NoSQLAdapter)    		log()
    
+(in RestrictedError)    		LT()
    
+(in BaseAdapter)
    LEFT_JOIN()
    
+(in OracleAdapter)    		log()
    
+(in Service)    		LT()
    
+(in GoogleDatastoreAdapter)
    LEGEND
    
+(in web2py.gluon.html)    		log_event()
    
+(in Auth)    		 
    len()
    
+(in Expression)    		log_event()
    
+(in Crud)    		 
    
+
    M
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    m
    
+(in lazyT)    		max
    
+(in date)    		min()
    
+(in Expression)
    Mail
    
+(in web2py.gluon.tools)    		max
    
+(in datetime)    		minutes()
    
+(in Expression)
    main
    
+(in web2py.gluon)    		max
    
+(in time)    		mktree()
    
+(in web2py.gluon.fileutils)
    make_fake_file_like_object()
    
+(in web2py.gluon.fileutils)    		max()
    
+(in Expression)    		MOD()
    
+(in BaseAdapter)
    make_value_from_datastore()
    
+(in GAEDecimalProperty)    		maxcharlength
    
+(in BaseAdapter)    		module
    
+(in web2py.gluon.import_all)
    makefile
    
+(in Connection)    		MAXCHARLENGTH
    
+(in web2py.gluon.dal)    		MongoDBAdapter
    
+(in web2py.gluon.dal)
    map_app()
    
+(in MapUrlIn)    		maxcharlength
    
+(in MySQLAdapter)    		Monitor
    
+(in web2py.gluon.rocket)
    map_controller()
    
+(in MapUrlIn)    		md5_hash()
    
+(in web2py.gluon.utils)    		month()
    
+(in Expression)
    map_function()
    
+(in MapUrlIn)    		MEDIUM_BLOB
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)    		msg
    
+(in web2py.gluon.widget)
    map_language()
    
+(in MapUrlIn)    		MENU
    
+(in web2py.gluon.html)    		MSSQL
    
+(in web2py.gluon.reserved_sql_keywords)
    map_prefix()
    
+(in MapUrlIn)    		message
    
+(in HTTP)    		MSSQL2Adapter
    
+(in web2py.gluon.dal)
    map_root_static()
    
+(in MapUrlIn)    		Messages
    
+(in web2py.gluon.storage)    		MSSQLAdapter
    
+(in web2py.gluon.dal)
    map_static()
    
+(in MapUrlIn)    		META
    
+(in web2py.gluon.html)    		MUL()
    
+(in BaseAdapter)
    map_url_in()
    
+(in web2py.gluon.rewrite)    		meta_storage
    
+(in CacheInRam)    		MUL()
    
+(in NoSQLAdapter)
    map_url_out()
    
+(in web2py.gluon.rewrite)    		middleware_aux()
    
+(in web2py.gluon.main)    		MultipleOptionsWidget
    
+(in web2py.gluon.sqlhtml)
    MapUrlIn
    
+(in web2py.gluon.rewrite)    		migrate_table()
    
+(in BaseAdapter)    		mybuiltin
    
+(in web2py.gluon.compileapp)
    MapUrlOut
    
+(in web2py.gluon.rewrite)    		migrate_table()
    
+(in NoSQLAdapter)    		myregex
    
+(in web2py.gluon)
    markdown_serializer()
    
+(in web2py.gluon.html)    		min
    
+(in date)    		MYSQL
    
+(in web2py.gluon.reserved_sql_keywords)
    MARKMIN
    
+(in web2py.gluon.html)    		min
    
+(in datetime)    		MySQLAdapter
    
+(in web2py.gluon.dal)
    markmin_serializer()
    
+(in web2py.gluon.html)    		min
    
+(in time)    		 
    
+
    N
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    name
    
+(in web2py.gluon.import_all)    		nice()
    
+(in IS_DATETIME)    		NOT_NULL()
    
+(in OracleAdapter)
    navbar()
    
+(in Auth)    		no_underscore()
    
+(in BEAUTIFY)    		NotSupportedError
    NE()
    
+(in BaseAdapter)    		Node
    
+(in web2py.gluon.template)    		NotSupportedError
    
+(in web2py.gluon.contrib.pymysql.err)
    NE()
    
+(in CouchDBAdapter)    		NoSQLAdapter
    
+(in web2py.gluon.dal)    		NULL
    
+(in web2py.gluon.contrib.pymysql)
    NE()
    
+(in GoogleDatastoreAdapter)    		NOT()
    
+(in BaseAdapter)    		NULL
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)
    newcron
    
+(in web2py.gluon)    		NOT()
    
+(in GoogleDatastoreAdapter)    		NullHandler
    
+(in web2py.gluon.rocket)
    NEWDATE
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)    		not_authorized()
    
+(in Auth)    		NUMBER
    
+(in psycopg2)
    NEWDECIMAL
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)    		NOT_NULL()
    
+(in BaseAdapter)    		NUMBER
    
+(in web2py.gluon.contrib.pymysql)
    NEWLINE
    
+(in web2py.gluon.rocket)    		NOT_NULL()
    
+(in FireBirdAdapter)    		numbers
    
+(in IS_IPV4)
    next()
    
+(in FileWrapper)    		NOT_NULL()
    
+(in InformixAdapter)    		 
    
+
    O
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    OBJECT
    
+(in web2py.gluon.html)    		ON()
    
+(in NoSQLAdapter)    		OR()
    
+(in BaseAdapter)
    official_top_level_domains
    
+(in web2py.gluon.validators)    		on()
    
+(in Table)    		OR()
    
+(in CouchDBAdapter)
    official_url_schemes
    
+(in web2py.gluon.validators)    		OperationalErrorOR()
    
+(in NoSQLAdapter)
    OL
    
+(in web2py.gluon.html)    		OperationalError
    
+(in web2py.gluon.contrib.pymysql.err)    		ORACLE
    
+(in web2py.gluon.reserved_sql_keywords)
    omit_acf()
    
+(in MapUrlOut)    		OPTGROUP
    
+(in web2py.gluon.html)    		oracle_fix
    
+(in OracleAdapter)
    omit_lang()
    
+(in MapUrlOut)    		OPTION
    
+(in web2py.gluon.html)    		OracleAdapter
    
+(in web2py.gluon.dal)
    ON
    
+(in web2py.gluon)    		options()
    
+(in IS_IN_DB)    		os_locking
    
+(in web2py.gluon.portalocker)
    ON
    
+(in web2py.gluon.html)    		options()
    
+(in IS_IN_SET)    		output()
    
+(in BlockNode)
    ON
    
+(in web2py.gluon.tools)    		options_sorter()
    
+(in web2py.gluon.validators)    		 
    ON()
    
+(in BaseAdapter)    		OptionsWidget
    
+(in web2py.gluon.sqlhtml)    		 
    
+
    P
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    P
    
+(in web2py.gluon.html)    		plugin_install()
    
+(in web2py.gluon.admin)    		PRIMARY_KEY()
    
+(in NoSQLAdapter)
    params
    
+(in web2py.gluon.rewrite)    		plugin_pack()
    
+(in web2py.gluon.admin)    		private
    
+(in IS_IPV4)
    params_apps
    
+(in web2py.gluon.rewrite)    		PluginManager
    
+(in web2py.gluon.tools)    		process()
    
+(in FORM)
    paramstyle
    
+(in psycopg2)    		pool_connection()
    
+(in ConnectionPool)    		profile()
    
+(in Auth)
    paramstyle
    
+(in sqlite3.dbapi2)    		pools
    
+(in ConnectionPool)    		ProgramAuthor
    
+(in web2py.gluon.widget)
    paramstyle
    
+(in web2py.gluon.contrib.pymysql)    		pop_arg_if()
    
+(in MapUrlIn)    		ProgramInfo
    
+(in web2py.gluon.widget)
    parse()
    
+(in BaseAdapter)    		portalocker
    
+(in web2py.gluon)    		ProgrammingError
    parse()
    
+(in TemplateParser)    		POSTGRESQL
    
+(in web2py.gluon.reserved_sql_keywords)    		ProgrammingError
    
+(in web2py.gluon.contrib.pymysql.err)
    parse_as_rest()
    
+(in DAL)    		POSTGRESQL_NONRESERVED
    
+(in web2py.gluon.reserved_sql_keywords)    		ProgramName
    
+(in web2py.gluon.widget)
    PARSE_COLNAMES
    
+(in sqlite3.dbapi2)    		PostgreSQLAdapter
    
+(in web2py.gluon.dal)    		ProgramVersion
    
+(in web2py.gluon.widget)
    PARSE_DECLTYPES
    
+(in sqlite3.dbapi2)    		PRE
    
+(in web2py.gluon.html)    		psycopg2
    parse_get_post_vars()
    
+(in web2py.gluon.main)    		prepare()
    
+(in BaseAdapter)    		py26_deprecated
    
+(in web2py.gluon.import_all)
    parse_path_info()
    
+(in web2py.gluon.shell)    		prepare()
    
+(in MySQLAdapter)    		py27_deprecated
    
+(in web2py.gluon.import_all)
    parse_template()
    
+(in web2py.gluon.template)    		prepare()
    
+(in NoSQLAdapter)    		PY3K
    
+(in web2py.gluon.rocket)
    parsecronline()
    
+(in web2py.gluon.newcron)    		prepare()
    
+(in PostgreSQLAdapter)    		PY_STRING_LITERAL_RE
    
+(in web2py.gluon.languages)
    PasswordWidget
    
+(in web2py.gluon.sqlhtml)    		presentation()
    
+(in web2py.gluon.widget)    		pymysql
    
+(in web2py.gluon.contrib)
    Pipe
    
+(in web2py.gluon.debug)    		prettydate()
    
+(in web2py.gluon.tools)    		python_tokenizer()
    
+(in Highlighter)
    pipe_in
    
+(in web2py.gluon.debug)    		PRIMARY_KEY()
    
+(in BaseAdapter)    		python_version
    
+(in web2py.gluon.import_all)
    pipe_out
    
+(in web2py.gluon.debug)    		PRIMARY_KEY()
    
+(in MSSQLAdapter)    		 
    
+
    Q
    		
+
+
+
+
+
+
+
+
    Query
    
+(in web2py.gluon.dal)    		quit()
    
+(in web2pyDialog)    		 
       
    
+
    R
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    r_multiline
    
+(in TemplateParser)    		regex_dbname
    
+(in web2py.gluon.dal)    		resolution
    
+(in datetime)
    r_tag
    
+(in TemplateParser)    		regex_expose
    
+(in web2py.gluon.myregex)    		resolution
    
+(in time)
    RadioWidget
    
+(in web2py.gluon.sqlhtml)    		regex_extend
    
+(in web2py.gluon.myregex)    		Response
    
+(in web2py.gluon.globals)
    RANDOM()
    
+(in BaseAdapter)    		regex_filter_in()
    
+(in web2py.gluon.rewrite)    		RESPONSE
    
+(in web2py.gluon.rocket)
    RANDOM()
    
+(in DB2Adapter)    		regex_filter_out()
    
+(in web2py.gluon.rewrite)    		restart()
    
+(in Rocket)
    RANDOM()
    
+(in FireBirdAdapter)    		regex_geocode
    
+(in web2py.gluon.tools)    		restful()
    
+(in Request)
    RANDOM()
    
+(in InformixAdapter)    		regex_id
    
+(in DIV)    		restricted
    
+(in web2py.gluon)
    RANDOM()
    
+(in IngresAdapter)    		regex_include
    
+(in web2py.gluon.myregex)    		restricted()
    
+(in web2py.gluon.restricted)
    RANDOM()
    
+(in MSSQLAdapter)    		regex_language
    
+(in web2py.gluon.languages)    		RestrictedError
    
+(in web2py.gluon.restricted)
    RANDOM()
    
+(in MySQLAdapter)    		regex_proposed_but_failed
    
+(in IS_EMAIL)    		retrieve()
    
+(in Field)
    RANDOM()
    
+(in NoSQLAdapter)    		regex_python_keywords
    
+(in web2py.gluon.dal)    		retrieve_password()
    
+(in Auth)
    RANDOM()
    
+(in OracleAdapter)    		regex_quotes
    
+(in web2py.gluon.dal)    		retrieve_username()
    
+(in Auth)
    RANDOM()
    
+(in PostgreSQLAdapter)    		regex_select()
    
+(in web2py.gluon.rewrite)    		rewrite
    
+(in web2py.gluon)
    random_password()
    
+(in Auth)    		regex_session_id
    
+(in web2py.gluon.globals)    		rocket
    
+(in web2py.gluon)
    rangetolist()
    
+(in web2py.gluon.newcron)    		regex_space
    
+(in web2py.gluon.rewrite)    		Rocket
    
+(in web2py.gluon.rocket)
    re_block
    
+(in TemplateParser)    		regex_start_range
    
+(in web2py.gluon.streamer)    		rollback()
    
+(in BaseAdapter)
    re_pass
    
+(in TemplateParser)    		regex_static
    
+(in web2py.gluon.rewrite)    		rollback()
    
+(in DAL)
    re_REQUEST_LINE
    
+(in web2py.gluon.rocket)    		regex_stop_range
    
+(in web2py.gluon.streamer)    		rollback()
    
+(in NoSQLAdapter)
    re_SLASH
    
+(in web2py.gluon.rocket)    		regex_tables
    
+(in web2py.gluon.myregex)    		rollback_prepared()
    
+(in BaseAdapter)
    re_unblock
    
+(in TemplateParser)    		regex_tag
    
+(in DIV)    		rollback_prepared()
    
+(in MySQLAdapter)
    read()
    
+(in DatabaseStoredFile)    		regex_time
    
+(in web2py.gluon.validators)    		rollback_prepared()
    
+(in NoSQLAdapter)
    read()
    
+(in Pipe)    		regex_translate
    
+(in web2py.gluon.languages)    		rollback_prepared()
    
+(in PostgreSQLAdapter)
    read()
    
+(in lazyT)    		regex_uri()
    
+(in web2py.gluon.rewrite)    		root
    
+(in web2py.gluon.import_all)
    read()
    
+(in ChunkedReader)    		regex_url
    
+(in web2py.gluon.rewrite)    		ROUTER_BASE_KEYS
    
+(in web2py.gluon.rewrite)
    read()
    
+(in Crud)    		regex_url_in()
    
+(in web2py.gluon.rewrite)    		ROUTER_KEYS
    
+(in web2py.gluon.rewrite)
    read_dict()
    
+(in web2py.gluon.languages)    		register()
    
+(in Auth)    		routers
    
+(in web2py.gluon.rewrite)
    read_dict_aux()
    
+(in web2py.gluon.languages)    		reindent()
    
+(in TemplateParser)    		Row
    
+(in web2py.gluon.dal)
    read_file()
    
+(in web2py.gluon.fileutils)    		release()
    
+(in Token)    		Row_pickler()
    
+(in web2py.gluon.dal)
    read_headers()
    
+(in Worker)    		remove_compiled_application()
    
+(in web2py.gluon.compileapp)    		Row_unpickler()
    
+(in web2py.gluon.dal)
    read_pyc()
    
+(in web2py.gluon.compileapp)    		render()
    
+(in Response)    		ROWID
    
+(in psycopg2)
    read_request_line()
    
+(in Worker)    		render()
    
+(in web2py.gluon.template)    		ROWID
    
+(in web2py.gluon.contrib.pymysql)
    readline()
    
+(in DatabaseStoredFile)    		represent()
    
+(in BaseAdapter)    		Rows
    
+(in web2py.gluon.dal)
    readline()
    
+(in Pipe)    		represent()
    
+(in CouchDBAdapter)    		rows()
    
+(in Crud)
    readline()
    
+(in ChunkedReader)    		represent()
    
+(in MSSQL2Adapter)    		Rows_pickler()
    
+(in web2py.gluon.dal)
    readlines()
    
+(in ChunkedReader)    		represent()
    
+(in NoSQLAdapter)    		Rows_unpickler()
    
+(in web2py.gluon.dal)
    readlines_file()
    
+(in web2py.gluon.fileutils)    		represent()
    
+(in UploadWidget)    		rowslice()
    
+(in BaseAdapter)
    Recaptcha
    
+(in web2py.gluon.tools)    		represent()
    
+(in web2py.gluon.sqlhtml)    		rowslice()
    
+(in DB2Adapter)
    recursive_unlink()
    
+(in web2py.gluon.fileutils)    		represent_exceptions()
    
+(in BaseAdapter)    		rowslice()
    
+(in MSSQLAdapter)
    redirect()
    
+(in web2py.gluon.http)    		represent_exceptions()
    
+(in DB2Adapter)    		rowslice()
    
+(in NoSQLAdapter)
    Reference
    
+(in web2py.gluon.dal)    		represent_exceptions()
    
+(in InformixAdapter)    		rss()
    
+(in web2py.gluon.serializers)
    Reference_pickler()
    
+(in web2py.gluon.dal)    		represent_exceptions()
    
+(in MSSQLAdapter)    		rss()
    
+(in Service)
    Reference_unpickler()
    
+(in web2py.gluon.dal)    		represent_exceptions()
    
+(in NoSQLAdapter)    		run()
    
+(in cronlauncher)
    regex
    
+(in IS_EMAIL)    		represent_exceptions()
    
+(in OracleAdapter)    		run()
    
+(in extcron)
    regex
    
+(in IS_IPV4)    		Request
    
+(in web2py.gluon.globals)    		run()
    
+(in hardcron)
    regex1
    
+(in web2py.gluon.validators)    		request_reset_password()
    
+(in Auth)    		run()
    
+(in softcron)
    regex2
    
+(in web2py.gluon.validators)    		requests
    
+(in web2py.gluon.main)    		run()
    
+(in Listener)
    regex_anything
    
+(in web2py.gluon.rewrite)    		requires()
    
+(in Auth)    		run()
    
+(in Monitor)
    regex_args
    
+(in web2py.gluon.rewrite)    		requires_login()
    
+(in Auth)    		run()
    
+(in Worker)
    regex_at
    
+(in web2py.gluon.rewrite)    		requires_membership()
    
+(in Auth)    		run()
    
+(in web2py.gluon.shell)
    regex_attr
    
+(in DIV)    		requires_permission()
    
+(in Auth)    		run()
    
+(in Service)
    regex_class
    
+(in DIV)    		requires_signature()
    
+(in Auth)    		run_app()
    
+(in WSGIWorker)
    regex_cleanup_fn
    
+(in web2py.gluon.dal)    		reserved_sql_keywords
    
+(in web2py.gluon)    		run_app()
    
+(in Worker)
    regex_client
    
+(in web2py.gluon.main)    		reset_password()
    
+(in Auth)    		run_controller_in()
    
+(in web2py.gluon.compileapp)
    regex_content
    
+(in web2py.gluon.dal)    		reset_password_deprecated()
    
+(in Auth)    		run_models_in()
    
+(in web2py.gluon.compileapp)
    regex_crlf
    
+(in web2py.gluon.html)    		resolution
    
+(in date)    		run_view_in()
    
+(in web2py.gluon.compileapp)
    
+
    S
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    s
    
+(in lazyT)    		set_trace()
    
+(in web2py.gluon.debug)    		SQLiteAdapter
    
+(in web2py.gluon.dal)
    safe_float()
    
+(in web2py.gluon.sqlhtml)    		setblocking
    
+(in Connection)    		SQLTABLE
    
+(in web2py.gluon.sqlhtml)
    safe_int()
    
+(in web2py.gluon.sqlhtml)    		setdefault()
    
+(in Headers)    		ssl
    
+(in Connection)
    sanitize()
    
+(in web2py.gluon.sanitizer)    		settings
    
+(in web2py.gluon)    		SSLError
    
+(in web2py.gluon.rocket)
    sanitizer
    
+(in web2py.gluon)    		settings
    
+(in web2py.gluon.settings)    		start()
    
+(in HttpServer)
    SAPDBAdapter
    
+(in web2py.gluon.dal)    		Settings
    
+(in web2py.gluon.storage)    		start()
    
+(in Rocket)
    save_password()
    
+(in web2py.gluon.main)    		setvirtualfields()
    
+(in Rows)    		start()
    
+(in ThreadPool)
    save_pyc()
    
+(in web2py.gluon.compileapp)    		shell
    
+(in web2py.gluon)    		start()
    
+(in web2py.gluon.widget)
    save_storage()
    
+(in web2py.gluon.storage)    		SHORT
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)    		start()
    
+(in web2pyDialog)
    SCRIPT
    
+(in web2py.gluon.html)    		shrink()
    
+(in ThreadPool)    		start()
    
+(in Service)
    search()
    
+(in Crud)    		shutdown
    
+(in Connection)    		start()
    
+(in Web2pyService)
    seconds()
    
+(in Expression)    		sibling()
    
+(in DIV)    		start_browser()
    
+(in web2py.gluon.widget)
    secure
    
+(in Connection)    		siblings()
    
+(in DIV)    		start_response()
    
+(in WSGIWorker)
    secure()
    
+(in Session)    		simple_hash()
    
+(in web2py.gluon.utils)    		start_response_aux()
    
+(in web2py.gluon.main)
    SELECT
    
+(in web2py.gluon.html)    		snapshot()
    
+(in web2py.gluon.restricted)    		start_time
    
+(in Connection)
    select()
    
+(in BaseAdapter)    		soap()
    
+(in Service)    		STARTSWITH()
    
+(in BaseAdapter)
    select()
    
+(in CouchDBAdapter)    		socket
    
+(in Connection)    		startswith()
    
+(in Expression)
    select()
    
+(in GoogleDatastoreAdapter)    		SOCKET_TIMEOUT
    
+(in web2py.gluon.rocket)    		STARTSWITH()
    
+(in NoSQLAdapter)
    select()
    
+(in MongoDBAdapter)    		SocketClosed
    
+(in web2py.gluon.rocket)    		STARTSWITH()
    
+(in PostgreSQLAdapter)
    select()
    
+(in Set)    		SocketTimeout
    
+(in web2py.gluon.rocket)    		startswith()
    
+(in SQLCustomType)
    select()
    
+(in Crud)    		softcron
    
+(in web2py.gluon.newcron)    		STDOFFSET
    
+(in psycopg2.tz)
    select_limitby()
    
+(in BaseAdapter)    		sort()
    
+(in Rows)    		stop()
    
+(in HttpServer)
    select_limitby()
    
+(in DB2Adapter)    		SPAN
    
+(in web2py.gluon.html)    		stop()
    
+(in Monitor)
    select_limitby()
    
+(in FireBirdAdapter)    		speedup_checks
    
+(in CacheOnDisk)    		stop()
    
+(in Rocket)
    select_limitby()
    
+(in InformixAdapter)    		sql
    
+(in web2py.gluon)    		stop()
    
+(in ThreadPool)
    select_limitby()
    
+(in IngresAdapter)    		sql_locker
    
+(in web2py.gluon.dal)    		stop()
    
+(in web2pyDialog)
    select_limitby()
    
+(in MSSQLAdapter)    		SQLALL
    
+(in web2py.gluon.dal)    		stop()
    
+(in Service)
    select_limitby()
    
+(in OracleAdapter)    		SQLCallableList
    
+(in web2py.gluon.dal)    		stop()
    
+(in Web2pyService)
    select_limitby()
    
+(in SAPDBAdapter)    		SQLCustomType
    
+(in web2py.gluon.dal)    		stop_trace()
    
+(in web2py.gluon.debug)
    select_raw()
    
+(in GoogleDatastoreAdapter)    		SQLFORM
    
+(in web2py.gluon.sqlhtml)    		stopcron()
    
+(in web2py.gluon.newcron)
    send()
    
+(in Mail)    		sqlhtml
    
+(in web2py.gluon)    		storage
    
+(in web2py.gluon)
    send_headers()
    
+(in WSGIWorker)    		sqlhtml_validators()
    
+(in web2py.gluon.dal)    		Storage
    
+(in web2py.gluon.storage)
    send_response()
    
+(in Worker)    		SQLITE
    
+(in web2py.gluon.reserved_sql_keywords)    		StorageList
    
+(in web2py.gluon.storage)
    sendall
    
+(in Connection)    		SQLITE_ALTER_TABLE
    
+(in sqlite3.dbapi2)    		store()
    
+(in Field)
    sequence_name()
    
+(in BaseAdapter)    		SQLITE_ANALYZE
    
+(in sqlite3.dbapi2)    		store()
    
+(in TicketStorage)
    sequence_name()
    
+(in FireBirdAdapter)    		SQLITE_ATTACH
    
+(in sqlite3.dbapi2)    		stream()
    
+(in Response)
    sequence_name()
    
+(in OracleAdapter)    		SQLITE_CREATE_INDEX
    
+(in sqlite3.dbapi2)    		stream_file_or_304_or_206()
    
+(in web2py.gluon.streamer)
    sequence_name()
    
+(in PostgreSQLAdapter)    		SQLITE_CREATE_TABLE
    
+(in sqlite3.dbapi2)    		streamer
    
+(in web2py.gluon)
    sequence_name()
    
+(in SAPDBAdapter)    		SQLITE_CREATE_TEMP_INDEX
    
+(in sqlite3.dbapi2)    		streamer()
    
+(in web2py.gluon.streamer)
    serialize()
    
+(in MENU)    		SQLITE_CREATE_TEMP_TABLE
    
+(in sqlite3.dbapi2)    		strict
    
+(in HTML)
    serializers
    
+(in web2py.gluon)    		SQLITE_CREATE_TEMP_TRIGGER
    
+(in sqlite3.dbapi2)    		strict
    
+(in XHTML)
    serve_amfrpc()
    
+(in Service)    		SQLITE_CREATE_TEMP_VIEW
    
+(in sqlite3.dbapi2)    		STRING
    
+(in psycopg2)
    serve_controller()
    
+(in web2py.gluon.main)    		SQLITE_CREATE_TRIGGER
    
+(in sqlite3.dbapi2)    		STRING
    
+(in web2py.gluon.contrib.pymysql)
    serve_csv()
    
+(in Service)    		SQLITE_CREATE_VIEW
    
+(in sqlite3.dbapi2)    		STRING
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)
    serve_json()
    
+(in Service)    		SQLITE_DELETE
    
+(in sqlite3.dbapi2)    		string_unpack
    
+(in web2py.gluon.dal)
    serve_jsonrpc()
    
+(in Service)    		SQLITE_DENY
    
+(in sqlite3.dbapi2)    		StringWidget
    
+(in web2py.gluon.sqlhtml)
    serve_rss()
    
+(in Service)    		SQLITE_DETACH
    
+(in sqlite3.dbapi2)    		strip()
    
+(in XssCleaner)
    serve_run()
    
+(in Service)    		SQLITE_DROP_INDEX
    
+(in sqlite3.dbapi2)    		STYLE
    
+(in web2py.gluon.html)
    serve_soap()
    
+(in Service)    		SQLITE_DROP_TABLE
    
+(in sqlite3.dbapi2)    		style()
    
+(in SQLTABLE)
    serve_xml()
    
+(in Service)    		SQLITE_DROP_TEMP_INDEX
    
+(in sqlite3.dbapi2)    		SUB()
    
+(in BaseAdapter)
    serve_xmlrpc()
    
+(in Service)    		SQLITE_DROP_TEMP_TABLE
    
+(in sqlite3.dbapi2)    		SUB()
    
+(in NoSQLAdapter)
    server
    
+(in Web2pyService)    		SQLITE_DROP_TEMP_TRIGGER
    
+(in sqlite3.dbapi2)    		SUBSTRING()
    
+(in BaseAdapter)
    SERVER_NAME
    
+(in web2py.gluon.rocket)    		SQLITE_DROP_TEMP_VIEW
    
+(in sqlite3.dbapi2)    		SUBSTRING()
    
+(in FireBirdAdapter)
    server_port
    
+(in Connection)    		SQLITE_DROP_TRIGGER
    
+(in sqlite3.dbapi2)    		SUBSTRING()
    
+(in MSSQLAdapter)
    SERVER_SOFTWARE
    
+(in web2py.gluon.rocket)    		SQLITE_DROP_VIEW
    
+(in sqlite3.dbapi2)    		SUBSTRING()
    
+(in MySQLAdapter)
    Service
    
+(in web2py.gluon.tools)    		SQLITE_IGNORE
    
+(in sqlite3.dbapi2)    		SUBSTRING()
    
+(in NoSQLAdapter)
    Service
    
+(in web2py.gluon.winservice)    		SQLITE_INSERT
    
+(in sqlite3.dbapi2)    		sum()
    
+(in Expression)
    Session
    
+(in web2py.gluon.globals)    		SQLITE_OK
    
+(in sqlite3.dbapi2)    		SuperNode
    
+(in web2py.gluon.template)
    SET
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)    		SQLITE_PRAGMA
    
+(in sqlite3.dbapi2)    		support_distributed_transaction
    
+(in BaseAdapter)
    Set
    
+(in web2py.gluon.dal)    		SQLITE_READ
    
+(in sqlite3.dbapi2)    		support_distributed_transaction
    
+(in FireBirdAdapter)
    set_current_languages()
    
+(in translator)    		SQLITE_REINDEX
    
+(in sqlite3.dbapi2)    		support_distributed_transaction
    
+(in MySQLAdapter)
    set_folder()
    
+(in ConnectionPool)    		SQLITE_SELECT
    
+(in sqlite3.dbapi2)    		support_distributed_transaction
    
+(in PostgreSQLAdapter)
    set_folder()
    
+(in DAL)    		SQLITE_TRANSACTION
    
+(in sqlite3.dbapi2)    		support_distributed_transaction
    
+(in SAPDBAdapter)
    set_self_id()
    
+(in IS_EMPTY_OR)    		SQLITE_UPDATE
    
+(in sqlite3.dbapi2)    		SvcDoRun()
    
+(in Service)
    set_self_id()
    
+(in IS_IN_DB)    		sqlite_version
    
+(in sqlite3.dbapi2)    		SvcStop()
    
+(in Service)
    set_self_id()
    
+(in IS_NOT_IN_DB)    		sqlite_version_info
    
+(in sqlite3.dbapi2)    		 
    
+
    T
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    T
    
+(in lazyT)    		tag
    
+(in SCRIPT)    		TIME
    
+(in web2py.gluon.contrib.pymysql)
    Table
    
+(in web2py.gluon.dal)    		tag
    
+(in SELECT)    		TIME
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)
    TABLE
    
+(in web2py.gluon.html)    		tag
    
+(in SPAN)    		TIMESTAMP
    
+(in web2py.gluon.contrib.pymysql)
    table_field
    
+(in web2py.gluon.dal)    		tag
    
+(in STYLE)    		TIMESTAMP
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)
    table_field
    
+(in web2py.gluon.sqlhtml)    		tag
    
+(in TABLE)    		TimeWidget
    
+(in web2py.gluon.sqlhtml)
    tables()
    
+(in BaseAdapter)    		TAG
    
+(in web2py.gluon.html)    		TINY
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)
    tables()
    
+(in Crud)    		tag
    
+(in TBODY)    		TINY_BLOB
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)
    TAG
    
+(in web2py.gluon)    		tag
    
+(in TD)    		TITLE
    
+(in web2py.gluon.html)
    tag
    
+(in A)    		tag
    
+(in TEXTAREA)    		to()
    
+(in HTTP)
    tag
    
+(in B)    		tag
    
+(in TFOOT)    		to_string()
    
+(in TemplateParser)
    tag
    
+(in BEAUTIFY)    		tag
    
+(in TH)    		to_unicode()
    
+(in NoSQLAdapter)
    tag
    
+(in BODY)    		tag
    
+(in THEAD)    		Token
    
+(in web2py.gluon.newcron)
    tag
    
+(in BR)    		tag
    
+(in TITLE)    		toolbar()
    
+(in Response)
    tag
    
+(in BUTTON)    		tag
    
+(in TR)    		tools
    
+(in web2py.gluon)
    tag
    
+(in CAT)    		tag
    
+(in TT)    		TR
    
+(in web2py.gluon.html)
    tag
    
+(in CENTER)    		tag
    
+(in UL)    		track_changes()
    
+(in web2py.gluon.custom_import)
    tag
    
+(in COL)    		tag
    
+(in XHTML)    		transitional
    
+(in HTML)
    tag
    
+(in COLGROUP)    		TAG
    
+(in web2py.gluon.tools)    		transitional
    
+(in XHTML)
    tag
    
+(in DIV)    		TAG_pickler()
    
+(in web2py.gluon.html)    		translate()
    
+(in translator)
    tag
    
+(in EM)    		TAG_unpickler()
    
+(in web2py.gluon.html)    		translate()
    
+(in web2py.gluon.validators)
    tag
    
+(in EMBED)    		tar()
    
+(in web2py.gluon.fileutils)    		translator
    
+(in web2py.gluon.languages)
    tag
    
+(in FIELDSET)    		tar_compiled()
    
+(in web2py.gluon.fileutils)    		trigger_name()
    
+(in BaseAdapter)
    tag
    
+(in FORM)    		TBODY
    
+(in web2py.gluon.html)    		trigger_name()
    
+(in FireBirdAdapter)
    tag
    
+(in H1)    		TD
    
+(in web2py.gluon.html)    		trigger_name()
    
+(in OracleAdapter)
    tag
    
+(in H2)    		template
    
+(in web2py.gluon)    		truncate()
    
+(in BaseAdapter)
    tag
    
+(in H3)    		TemplateParser
    
+(in web2py.gluon.template)    		truncate()
    
+(in GoogleDatastoreAdapter)
    tag
    
+(in H4)    		TeradataAdapter
    
+(in web2py.gluon.dal)    		truncate()
    
+(in Table)
    tag
    
+(in H5)    		test()
    
+(in web2py.gluon.compileapp)    		try_redirect_on_error()
    
+(in web2py.gluon.rewrite)
    tag
    
+(in H6)    		test()
    
+(in web2py.gluon.html)    		try_rewrite_on_error()
    
+(in web2py.gluon.rewrite)
    tag
    
+(in HEAD)    		test()
    
+(in web2py.gluon.shell)    		try_start_browser()
    
+(in web2py.gluon.widget)
    tag
    
+(in HR)    		test_all()
    
+(in web2py.gluon.dal)    		TT
    
+(in web2py.gluon.html)
    tag
    
+(in HTML)    		TEST_CODE
    
+(in web2py.gluon.compileapp)    		types
    
+(in BaseAdapter)
    tag
    
+(in I)    		test_thread_separation()
    
+(in web2py.gluon.tools)    		types
    
+(in CouchDBAdapter)
    tag
    
+(in IFRAME)    		TEXTAREA
    
+(in web2py.gluon.html)    		types
    
+(in DB2Adapter)
    tag
    
+(in IMG)    		TextWidget
    
+(in web2py.gluon.sqlhtml)    		types
    
+(in FireBirdAdapter)
    tag
    
+(in INPUT)    		TFOOT
    
+(in web2py.gluon.html)    		types
    
+(in GoogleDatastoreAdapter)
    tag
    
+(in LABEL)    		TH
    
+(in web2py.gluon.html)    		types
    
+(in InformixAdapter)
    tag
    
+(in LEGEND)    		THEAD
    
+(in web2py.gluon.html)    		types
    
+(in IngresAdapter)
    tag
    
+(in LI)    		thread
    
+(in web2py.gluon.dal)    		types
    
+(in IngresUnicodeAdapter)
    tag
    
+(in LINK)    		thread
    
+(in web2py.gluon.rewrite)    		types
    
+(in MSSQL2Adapter)
    tag
    
+(in MENU)    		thread_safe()
    
+(in web2py.gluon.contrib.pymysql)    		types
    
+(in MSSQLAdapter)
    tag
    
+(in META)    		THREAD_STOP_CHECK_INTERVAL
    
+(in web2py.gluon.rocket)    		types
    
+(in MongoDBAdapter)
    tag
    
+(in OBJECT)    		ThreadPool
    
+(in web2py.gluon.rocket)    		types
    
+(in MySQLAdapter)
    tag
    
+(in OL)    		threadsafety
    
+(in psycopg2)    		types
    
+(in OracleAdapter)
    tag
    
+(in OPTGROUP)    		threadsafety
    
+(in sqlite3.dbapi2)    		types
    
+(in PostgreSQLAdapter)
    tag
    
+(in OPTION)    		threadsafety
    
+(in web2py.gluon.contrib.pymysql)    		types
    
+(in SAPDBAdapter)
    tag
    
+(in P)    		TicketStorage
    
+(in web2py.gluon.restricted)    		types
    
+(in TeradataAdapter)
    tag
    
+(in PRE)    		timetz
    
+(in psycopg2)
    
+
    U
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    u()
    
+(in web2py.gluon.rocket)    		update()
    
+(in DIV)    		URL()
    
+(in web2py.gluon.html)
    UL
    
+(in web2py.gluon.html)    		update()
    
+(in Crud)    		url()
    
+(in Auth)
    unicode_to_ascii_authority()
    
+(in web2py.gluon.validators)    		update()
    
+(in web2pyDialog)    		url()
    
+(in Crud)
    unicode_to_ascii_url()
    
+(in web2py.gluon.validators)    		update_all_languages()
    
+(in web2py.gluon.languages)    		url_in()
    
+(in web2py.gluon.rewrite)
    universal_caller()
    
+(in web2py.gluon.tools)    		update_canvas()
    
+(in web2pyDialog)    		url_is_acceptable()
    
+(in XssCleaner)
    unknown_endtag()
    
+(in XssCleaner)    		update_or_insert()
    
+(in Table)    		url_out()
    
+(in web2py.gluon.rewrite)
    unknown_starttag()
    
+(in XssCleaner)    		update_record()
    
+(in web2py.gluon.dal)    		url_split_regex
    
+(in web2py.gluon.validators)
    unlock()
    
+(in web2py.gluon.portalocker)    		update_request()
    
+(in MapUrlIn)    		urlify()
    
+(in IS_SLUG)
    unofficial_url_schemes
    
+(in web2py.gluon.validators)    		upgrade()
    
+(in web2py.gluon.admin)    		urlify()
    
+(in web2py.gluon.validators)
    untar()
    
+(in web2py.gluon.fileutils)    		uploads_in_blob
    
+(in BaseAdapter)    		UseDatabaseStoredFile
    
+(in web2py.gluon.dal)
    unzip()
    
+(in web2py.gluon.admin)    		uploads_in_blob
    
+(in CouchDBAdapter)    		user_agent()
    
+(in Request)
    up()
    
+(in web2py.gluon.fileutils)    		uploads_in_blob
    
+(in GoogleDatastoreAdapter)    		user_group()
    
+(in Auth)
    update()
    
+(in BaseAdapter)    		uploads_in_blob
    
+(in MongoDBAdapter)    		user_id
    
+(in Auth)
    update()
    
+(in CouchDBAdapter)    		UploadWidget
    
+(in web2py.gluon.sqlhtml)    		utf8_repr()
    
+(in web2py.gluon.languages)
    update()
    
+(in GoogleDatastoreAdapter)    		UPPER()
    
+(in BaseAdapter)    		utils
    
+(in web2py.gluon)
    update()
    
+(in MongoDBAdapter)    		upper()
    
+(in Expression)    		uuid2int()
    
+(in web2py.gluon.dal)
    update()
    
+(in Set)    		UPPER()
    
+(in NoSQLAdapter)    		 
    
+
    V
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    validate()
    
+(in Field)    		validators
    
+(in web2py.gluon)    		verifyURL()
    
+(in web2py.gluon.html)
    validate()
    
+(in GAEDecimalProperty)    		validators()
    
+(in web2py.gluon.tools)    		version
    
+(in sqlite3.dbapi2)
    validate()
    
+(in FORM)    		values()
    
+(in Headers)    		VERSION
    
+(in web2py.gluon.contrib.pymysql)
    validate_and_insert()
    
+(in Table)    		VAR_STRING
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)    		VERSION
    
+(in web2py.gluon.rocket)
    validate_and_update()
    
+(in Set)    		VARCHAR
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)    		version_info
    
+(in sqlite3.dbapi2)
    validate_args()
    
+(in MapUrlIn)    		verify_email()
    
+(in Auth)    		version_info
    
+(in web2py.gluon.contrib.pymysql)
    Validator
    
+(in web2py.gluon.validators)    		VERIFY_SERVER
    
+(in Recaptcha)    		version_info
    
+(in web2py.gluon.main)
    
+
    W
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    w2p_pack()
    
+(in web2py.gluon.fileutils)    		widget
    
+(in web2py.gluon)    		with_alias()
    
+(in Expression)
    w2p_pack_plugin()
    
+(in web2py.gluon.fileutils)    		widget()
    
+(in BooleanWidget)    		with_alias()
    
+(in Table)
    w2p_unpack()
    
+(in web2py.gluon.fileutils)    		widget()
    
+(in CheckboxesWidget)    		Worker
    
+(in web2py.gluon.rocket)
    w2p_unpack_plugin()
    
+(in web2py.gluon.fileutils)    		widget()
    
+(in FormWidget)    		wrap_socket()
    
+(in Listener)
    Warningwidget()
    
+(in ListWidget)    		write()
    
+(in DatabaseStoredFile)
    Warning
    
+(in web2py.gluon.contrib.pymysql.err)    		widget()
    
+(in MultipleOptionsWidget)    		write()
    
+(in Pipe)
    web2py_extract()
    
+(in SQLiteAdapter)    		widget()
    
+(in OptionsWidget)    		write()
    
+(in Response)
    web2py_filesystem
    
+(in DatabaseStoredFile)    		widget()
    
+(in PasswordWidget)    		write()
    
+(in WSGIWorker)
    web2py_path
    
+(in web2py.gluon.main)    		widget()
    
+(in RadioWidget)    		write()
    
+(in IO)
    web2py_uuid()
    
+(in web2py.gluon.utils)    		widget()
    
+(in StringWidget)    		write_dict()
    
+(in web2py.gluon.languages)
    web2py_version
    
+(in web2py.gluon.main)    		widget()
    
+(in TextWidget)    		write_file()
    
+(in web2py.gluon.fileutils)
    web2py_windows_service_handler()
    
+(in web2py.gluon.winservice)    		widget()
    
+(in UploadWidget)    		write_warning()
    
+(in WSGIWorker)
    web2pyDialog
    
+(in web2py.gluon.widget)    		widget_class
    
+(in web2py.gluon.sqlhtml)    		wsgibase()
    
+(in web2py.gluon.main)
    web2pyHTMLParser
    
+(in web2py.gluon.html)    		widgets
    
+(in SQLFORM)    		WSGIWorker
    
+(in web2py.gluon.rocket)
    Web2pyService
    
+(in web2py.gluon.winservice)    		winservice
    
+(in web2py.gluon)    		 
    
+
    X
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    x
    
+(in sqlite3.dbapi2)    		xml()
    
+(in P)    		XML_unpickle()
    
+(in web2py.gluon.html)
    XHTML
    
+(in web2py.gluon.html)    		xml()
    
+(in SCRIPT)    		XmlComponent
    
+(in web2py.gluon.html)
    XML
    
+(in web2py.gluon.html)    		xml()
    
+(in STYLE)    		xmlescape()
    
+(in web2py.gluon.html)
    xml()
    
+(in Rows)    		xml()
    
+(in XHTML)    		xmlns
    
+(in XHTML)
    xml()
    
+(in A)    		xml()
    
+(in XML)    		xmlrpc
    
+(in web2py.gluon)
    xml()
    
+(in CODE)    		xml()
    
+(in XmlComponent)    		xmlrpc()
    
+(in Response)
    xml()
    
+(in DIV)    		xml()
    
+(in lazyT)    		xmlrpc()
    
+(in Service)
    xml()
    
+(in FORM)    		xml()
    
+(in web2py.gluon.serializers)    		xorify()
    
+(in web2py.gluon.dal)
    xml()
    
+(in HTML)    		xml()
    
+(in Recaptcha)    		XssCleaner
    
+(in web2py.gluon.sanitizer)
    xml()
    
+(in INPUT)    		xml()
    
+(in Service)    		xssescape()
    
+(in web2py.gluon.sanitizer)
    xml()
    
+(in MARKMIN)    		XML_pickle()
    
+(in web2py.gluon.html)    		xtags()
    
+(in XssCleaner)
    xml()
    
+(in MENU)    		xml_rec()
    
+(in web2py.gluon.serializers)    		 
    
+
    Y
    		
+
+
+
+
+
+
+
+
    YEAR
    
+(in web2py.gluon.contrib.pymysql.constants.FIELD_TYPE)    		year()
    
+(in Expression)    		 
       
    
+
    Z
    		
+
+
+
+
+
+
+
+
    ZERO
    
+(in psycopg2.tz)    		  
       
    
+
    _
    		
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    __add__()
    
+(in Expression)    		__init__()
    
+(in MySQLAdapter)    		__repr__()
    
+(in BlockNode)
    __add__()
    
+(in XML)    		__init__()
    
+(in OracleAdapter)    		__repr__()
    
+(in SuperNode)
    __add__()
    
+(in lazyT)    		__init__()
    
+(in PostgreSQLAdapter)    		__setattr__()
    
+(in DAL)
    __allocate()
    
+(in Reference)    		__init__()
    
+(in Query)    		__setattr__()
    
+(in Reference)
    __and__()
    
+(in Query)    		__init__()
    
+(in Rows)    		__setattr__()
    
+(in Row)
    __and__()
    
+(in Rows)    		__init__()
    
+(in SAPDBAdapter)    		__setattr__()
    
+(in Table)
    __author__
    
+(in web2py.gluon.reserved_sql_keywords)    		__init__()
    
+(in SQLALL)    		__setattr__()
    
+(in Messages)
    __bmp()
    
+(in IS_IMAGE)    		__init__()
    
+(in SQLCustomType)    		__setattr__()
    
+(in Settings)
    __call__()
    
+(in Cache)    		__init__()
    
+(in SQLiteAdapter)    		__setattr__()
    
+(in Storage)
    __call__()
    
+(in CacheAbstract)    		__init__()
    
+(in Set)    		__setitem__()
    
+(in mybuiltin)
    __call__()
    
+(in CacheInRam)    		__init__()
    
+(in Table)    		__setitem__()
    
+(in DAL)
    __call__()
    
+(in CacheOnDisk)    		__init__()
    
+(in TeradataAdapter)    		__setitem__()
    
+(in Reference)
    __call__()
    
+(in LoadFactory)    		__init__()
    
+(in Pipe)    		__setitem__()
    
+(in Row)
    __call__()
    
+(in _BaseImporter)    		__init__()
    
+(in Request)    		__setitem__()
    
+(in Table)
    __call__()
    
+(in _DateTrackerImporter)    		__init__()
    
+(in Response)    		__setitem__()
    
+(in DIV)
    __call__()
    
+(in _Web2pyImporter)    		__init__()
    
+(in Highlighter)    		__setitem__()
    
+(in Headers)
    __call__()
    
+(in DAL)    		__init__()
    
+(in BEAUTIFY)    		__setstate__()
    
+(in Storage)
    __call__()
    
+(in Row)    		__init__()
    
+(in DIV)    		__str__()
    
+(in Expression)
    __call__()
    
+(in SQLCallableList)    		__init__()
    
+(in FORM)    		__str__()
    
+(in Field)
    __call__()
    
+(in Set)    		__init__()
    
+(in MARKMIN)    		__str__()
    
+(in Query)
    __call__()
    
+(in Table)    		__init__()
    
+(in MENU)    		__str__()
    
+(in Rows)
    __call__()
    
+(in __TAG__)    		__init__()
    
+(in XML)    		__str__()
    
+(in SQLALL)
    __call__()
    
+(in translator)    		__init__()
    
+(in web2pyHTMLParser)    		__str__()
    
+(in SQLCustomType)
    __call__()
    
+(in AutocompleteWidget)    		__init__()
    
+(in HTTP)    		__str__()
    
+(in Table)
    __call__()
    
+(in List)    		__init__()
    
+(in lazyT)    		__str__()
    
+(in DIV)
    __call__()
    
+(in Auth)    		__init__()
    
+(in translator)    		__str__()
    
+(in MARKMIN)
    __call__()
    
+(in Crud)    		__init__()
    
+(in HttpServer)    		__str__()
    
+(in XML)
    __call__()
    
+(in Service)    		__init__()
    
+(in Token)    		__str__()
    
+(in HTTP)
    __call__()
    
+(in CLEANUP)    		__init__()
    
+(in cronlauncher)    		__str__()
    
+(in lazyT)
    __call__()
    
+(in CRYPT)    		__init__()
    
+(in extcron)    		__str__()
    
+(in Headers)
    __call__()
    
+(in IS_DATE)    		__init__()
    
+(in hardcron)    		__str__()
    
+(in BlockNode)
    __call__()
    
+(in IS_DATETIME)    		__init__()
    
+(in softcron)    		__str__()
    
+(in Content)
    __call__()
    
+(in IS_DATETIME_IN_RANGE)    		__init__()
    
+(in RestrictedError)    		__str__()
    
+(in Node)
    __call__()
    
+(in IS_DATE_IN_RANGE)    		__init__()
    
+(in TicketStorage)    		__str__()
    
+(in SuperNode)
    __call__()
    
+(in IS_DECIMAL_IN_RANGE)    		__init__()
    
+(in MapUrlIn)    		__str__()
    
+(in TemplateParser)
    __call__()
    
+(in IS_EMAIL)    		__init__()
    
+(in MapUrlOut)    		__sub__()
    
+(in Expression)
    __call__()
    
+(in IS_EMPTY_OR)    		__init__()
    
+(in ChunkedReader)    		__TAG__
    
+(in web2py.gluon.html)
    __call__()
    
+(in IS_EQUAL_TO)    		__init__()
    
+(in Connection)    		__unicode__()
    
+(in TemplateParser)
    __call__()
    
+(in IS_EXPR)    		__init__()
    
+(in FileWrapper)    		_attributes()
    
+(in FormWidget)
    __call__()
    
+(in IS_FLOAT_IN_RANGE)    		__init__()
    
+(in Headers)    		_BaseImporter
    
+(in web2py.gluon.custom_import)
    __call__()
    
+(in IS_GENERIC_URL)    		__init__()
    
+(in Listener)    		_build_query()
    
+(in Table)
    __call__()
    
+(in IS_HTTP_URL)    		__init__()
    
+(in Monitor)    		_clear()
    
+(in CacheAbstract)
    __call__()
    
+(in IS_IMAGE)    		__init__()
    
+(in Rocket)    		_close()
    
+(in Session)
    __call__()
    
+(in IS_INT_IN_RANGE)    		__init__()
    
+(in ThreadPool)    		_count()
    
+(in BaseAdapter)
    __call__()
    
+(in IS_IN_DB)    		__init__()
    
+(in WSGIWorker)    		_count()
    
+(in NoSQLAdapter)
    __call__()
    
+(in IS_IN_SET)    		__init__()
    
+(in Worker)    		_count()
    
+(in Set)
    __call__()
    
+(in IS_IN_SUBSET)    		__init__()
    
+(in XssCleaner)    		_create_references()
    
+(in Table)
    __call__()
    
+(in IS_IPV4)    		__init__()
    
+(in AutocompleteWidget)    		_cron_stopping
    
+(in web2py.gluon.newcron)
    __call__()
    
+(in IS_LENGTH)    		__init__()
    
+(in SQLFORM)    		_DateTrackerImporter
    
+(in web2py.gluon.custom_import)
    __call__()
    
+(in IS_LIST_OF)    		__init__()
    
+(in SQLTABLE)    		_delete()
    
+(in BaseAdapter)
    __call__()
    
+(in IS_LOWER)    		__init__()
    
+(in Messages)    		_delete()
    
+(in NoSQLAdapter)
    __call__()
    
+(in IS_MATCH)    		__init__()
    
+(in BlockNode)    		_delete()
    
+(in Set)
    __call__()
    
+(in IS_NOT_EMPTY)    		__init__()
    
+(in Content)    		_drop()
    
+(in BaseAdapter)
    __call__()
    
+(in IS_NOT_IN_DB)    		__init__()
    
+(in Node)    		_drop()
    
+(in FireBirdAdapter)
    __call__()
    
+(in IS_SLUG)    		__init__()
    
+(in SuperNode)    		_drop()
    
+(in MySQLAdapter)
    __call__()
    
+(in IS_STRONG)    		__init__()
    
+(in TemplateParser)    		_drop()
    
+(in OracleAdapter)
    __call__()
    
+(in IS_TIME)    		__init__()
    
+(in Auth)    		_drop()
    
+(in Table)
    __call__()
    
+(in IS_UPLOAD_FILENAME)    		__init__()
    
+(in Crud)    		_error_file()
    
+(in TicketStorage)
    __call__()
    
+(in IS_UPPER)    		__init__()
    
+(in Attachment)    		_exe_args_
    
+(in Web2pyService)
    __call__()
    
+(in IS_URL)    		__init__()
    
+(in Mail)    		_extractall()
    
+(in web2py.gluon.fileutils)
    __cmp__()
    
+(in XML)    		__init__()
    
+(in PluginManager)    		_filter_fields()
    
+(in Table)
    __cmp__()
    
+(in lazyT)    		__init__()
    
+(in Recaptcha)    		_fixup()
    
+(in DIV)
    __contains__()
    
+(in DAL)    		__init__()
    
+(in JsonRpcException)    		_fixup()
    
+(in OPTGROUP)
    __contains__()
    
+(in PluginManager)    		__init__()
    
+(in Service)    		_fixup()
    
+(in OPTION)
    __copy__()
    
+(in Row)    		__init__()
    
+(in CLEANUP)    		_fixup()
    
+(in SELECT)
    __delattr__()
    
+(in Storage)    		__init__()
    
+(in CRYPT)    		_fixup()
    
+(in TABLE)
    __delitem__()
    
+(in Table)    		__init__()
    
+(in IS_ALPHANUMERIC)    		_fixup()
    
+(in TBODY)
    __delitem__()
    
+(in DIV)    		__init__()
    
+(in IS_DATE)    		_fixup()
    
+(in TFOOT)
    __delitem__()
    
+(in Headers)    		__init__()
    
+(in IS_DATETIME)    		_fixup()
    
+(in THEAD)
    __div__()
    
+(in Expression)    		__init__()
    
+(in IS_DATETIME_IN_RANGE)    		_fixup()
    
+(in TR)
    __eq__()
    
+(in DBAPISet)    		__init__()
    
+(in IS_DATE_IN_RANGE)    		_fixup()
    
+(in UL)
    __eq__()
    
+(in Expression)    		__init__()
    
+(in IS_DECIMAL_IN_RANGE)    		_formatparam()
    
+(in web2py.gluon.rocket)
    __eq__()
    
+(in Row)    		__init__()
    
+(in IS_EMAIL)    		_get_file_text()
    
+(in TemplateParser)
    __eq__()
    
+(in lazyT)    		__init__()
    
+(in IS_EMPTY_OR)    		_get_module_file()
    
+(in _DateTrackerImporter)
    __ge__()
    
+(in Expression)    		__init__()
    
+(in IS_EQUAL_TO)    		_get_table()
    
+(in TicketStorage)
    __get_migrate()
    
+(in Auth)    		__init__()
    
+(in IS_EXPR)    		_get_user_id()
    
+(in Auth)
    __getattr__()
    
+(in DAL)    		__init__()
    
+(in IS_FLOAT_IN_RANGE)    		_handleError()
    
+(in Worker)
    __getattr__()
    
+(in Reference)    		__init__()
    
+(in IS_GENERIC_URL)    		_HTTP()
    
+(in Auth)
    __getattr__()
    
+(in Row)    		__init__()
    
+(in IS_HTTP_URL)    		_insert()
    
+(in BaseAdapter)
    __getattr__()
    
+(in Table)    		__init__()
    
+(in IS_IMAGE)    		_insert()
    
+(in NoSQLAdapter)
    __getattr__()
    
+(in XML)    		__init__()
    
+(in IS_INT_IN_RANGE)    		_insert()
    
+(in Table)
    __getattr__()
    
+(in __TAG__)    		__init__()
    
+(in IS_IN_DB)    		_insert()
    
+(in Content)
    __getattr__()
    
+(in lazyT)    		__init__()
    
+(in IS_IN_SET)    		_is_tracking_changes
    
+(in web2py.gluon.custom_import)
    __getattr__()
    
+(in Messages)    		__init__()
    
+(in IS_IN_SUBSET)    		_listify()
    
+(in Table)
    __getattr__()
    
+(in Storage)    		__init__()
    
+(in IS_IPV4)    		_matchAppDir()
    
+(in _Web2pyImporter)
    __getattr__()
    
+(in StorageList)    		__init__()
    
+(in IS_LENGTH)    		_name
    
+(in FixedOffsetTimezone)
    __getattr__()
    
+(in PluginManager)    		__init__()
    
+(in IS_LIST_OF)    		_offset
    
+(in FixedOffsetTimezone)
    __getitem__()
    
+(in mybuiltin)    		__init__()
    
+(in IS_MATCH)    		_options()
    
+(in IS_EMPTY_OR)
    __getitem__()
    
+(in DAL)    		__init__()
    
+(in IS_NOT_EMPTY)    		_PACKAGE_PATH_SUFFIX
    
+(in _DateTrackerImporter)
    __getitem__()
    
+(in Expression)    		__init__()
    
+(in IS_NOT_IN_DB)    		_params_default()
    
+(in web2py.gluon.rewrite)
    __getitem__()
    
+(in Reference)    		__init__()
    
+(in IS_SLUG)    		_postprocessing()
    
+(in DIV)
    __getitem__()
    
+(in Row)    		__init__()
    
+(in IS_STRONG)    		_postprocessing()
    
+(in FORM)
    __getitem__()
    
+(in Rows)    		__init__()
    
+(in IS_TIME)    		_postprocessing()
    
+(in INPUT)
    __getitem__()
    
+(in SQLCustomType)    		__init__()
    
+(in IS_UPLOAD_FILENAME)    		_postprocessing()
    
+(in SELECT)
    __getitem__()
    
+(in Table)    		__init__()
    
+(in IS_URL)    		_postprocessing()
    
+(in TEXTAREA)
    __getitem__()
    
+(in DIV)    		__init__()
    
+(in IO)    		_raise_error()
    
+(in TemplateParser)
    __getitem__()
    
+(in XML)    		__init__()
    
+(in web2pyDialog)    		_RE_ESCAPED_PATH_SEP
    
+(in _Web2pyImporter)
    __getitem__()
    
+(in __TAG__)    		__init__()
    
+(in Service)    		_read_header()
    
+(in ChunkedReader)
    __getitem__()
    
+(in lazyT)    		__int__()
    
+(in Row)    		_read_request_line_jython()
    
+(in Worker)
    __getitem__()
    
+(in FileWrapper)    		__invert__()
    
+(in Expression)    		_reload_check()
    
+(in _DateTrackerImporter)
    __getitem__()
    
+(in Headers)    		__invert__()
    
+(in Query)    		_router_default()
    
+(in web2py.gluon.rewrite)
    __getslice__()
    
+(in Expression)    		__iter__()
    
+(in DAL)    		_select()
    
+(in BaseAdapter)
    __getslice__()
    
+(in Rows)    		__iter__()
    
+(in Rows)    		_select()
    
+(in CouchDBAdapter)
    __getslice__()
    
+(in SQLCustomType)    		__iter__()
    
+(in Table)    		_select()
    
+(in NoSQLAdapter)
    __getslice__()
    
+(in XML)    		__iter__()
    
+(in XML)    		_select()
    
+(in Set)
    __getslice__()
    
+(in lazyT)    		__iter__()
    
+(in lazyT)    		_setnode()
    
+(in DIV)
    __getstate__()
    
+(in Storage)    		__iter__()
    
+(in FileWrapper)    		_sighup()
    
+(in Rocket)
    __gif()
    
+(in IS_IMAGE)    		__jpeg()
    
+(in IS_IMAGE)    		_sigterm()
    
+(in Rocket)
    __gt__()
    
+(in Expression)    		__le__()
    
+(in Expression)    		_store_in_db()
    
+(in TicketStorage)
    __hash__()
    
+(in DBAPISet)    		__len__()
    
+(in Rows)    		_store_on_disk()
    
+(in TicketStorage)
    __hash__()
    
+(in XML)    		__len__()
    
+(in DIV)    		_svc_display_name_
    
+(in Service)
    __hash__()
    
+(in lazyT)    		__len__()
    
+(in XML)    		_svc_display_name_
    
+(in Web2pyService)
    __import__dot()
    
+(in _Web2pyImporter)    		__len__()
    
+(in lazyT)    		_svc_name_
    
+(in Service)
    __init__()
    
+(in Cache)    		__len__()
    
+(in Headers)    		_svc_name_
    
+(in Web2pyService)
    __init__()
    
+(in CacheAbstract)    		__lt__()
    
+(in Expression)    		_traverse()
    
+(in DIV)
    __init__()
    
+(in CacheInRam)    		__mod__()
    
+(in Expression)    		_truncate()
    
+(in BaseAdapter)
    __init__()
    
+(in CacheOnDisk)    		__mod__()
    
+(in lazyT)    		_truncate()
    
+(in FireBirdAdapter)
    __init__()
    
+(in LoadFactory)    		__mul__()
    
+(in Expression)    		_truncate()
    
+(in SQLiteAdapter)
    __init__()
    
+(in _DateTrackerImporter)    		__ne__()
    
+(in DBAPISet)    		_truncate()
    
+(in Table)
    __init__()
    
+(in _Web2pyImporter)    		__ne__()
    
+(in Expression)    		_try_store_in_db()
    
+(in Session)
    __init__()
    
+(in BaseAdapter)    		__ne__()
    
+(in Row)    		_try_store_on_disk()
    
+(in Session)
    __init__()
    
+(in CouchDBAdapter)    		__ne__()
    
+(in lazyT)    		_tspecials
    
+(in web2py.gluon.rocket)
    __init__()
    
+(in CubridAdapter)    		__new__()
    
+(in PluginManager)    		_unlock()
    
+(in Session)
    __init__()
    
+(in DAL)    		__nonzero__()
    
+(in Field)    		_update()
    
+(in BaseAdapter)
    __init__()
    
+(in DB2Adapter)    		__nonzero__()
    
+(in Rows)    		_update()
    
+(in NoSQLAdapter)
    __init__()
    
+(in DatabaseStoredFile)    		__nonzero__()
    
+(in DIV)    		_update()
    
+(in Set)
    __init__()
    
+(in Expression)    		__or__()
    
+(in Expression)    		_update_dates()
    
+(in _DateTrackerImporter)
    __init__()
    
+(in Field)    		__or__()
    
+(in Query)    		_update_referenced_by()
    
+(in DAL)
    __init__()
    
+(in FireBirdAdapter)    		__or__()
    
+(in Rows)    		_validate()
    
+(in Table)
    __init__()
    
+(in FireBirdEmbeddedAdapter)    		__overlapped
    
+(in web2py.gluon.portalocker)    		_validate()
    
+(in DIV)
    __init__()
    
+(in GAEDecimalProperty)    		__png()
    
+(in IS_IMAGE)    		_validate()
    
+(in INPUT)
    __init__()
    
+(in GAEF)    		__radd__()
    
+(in XML)    		_validate()
    
+(in Recaptcha)
    __init__()
    
+(in GoogleDatastoreAdapter)    		__radd__()
    
+(in lazyT)    		_web2py_date_tracker_importer
    
+(in web2py.gluon.custom_import)
    __init__()
    
+(in GoogleSQLAdapter)    		__repr__()
    
+(in DAL)    		_web2py_importer
    
+(in web2py.gluon.custom_import)
    __init__()
    
+(in InformixAdapter)    		__repr__()
    
+(in GAEF)    		_web2py_path
    
+(in web2py.gluon.custom_import)
    __init__()
    
+(in IngresAdapter)    		__repr__()
    
+(in Row)    		_Web2pyDateTrackerImporter
    
+(in web2py.gluon.custom_import)
    __init__()
    
+(in JDBCPostgreSQLAdapter)    		__repr__()
    
+(in Table)    		_Web2pyImporter
    
+(in web2py.gluon.custom_import)
    __init__()
    
+(in JDBCSQLiteAdapter)    		__repr__()
    
+(in lazyT)    		_Web2pyImporter__import__dot()
    
+(in _Web2pyImporter)
    __init__()
    
+(in MSSQLAdapter)    		__repr__()
    
+(in Headers)    		_wrap_components()
    
+(in DIV)
    __init__()
    
+(in MongoDBAdapter)    		__repr__()
    
+(in Storage)    		_xml()
    
+(in DIV)
    
+
    
+

    
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:58 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/index.html
Index: applications/examples/static/epydoc/index.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/index.html
@@ -0,0 +1,17 @@
+
+
+
+
+   web2py Web Framework 
+
+
+  
+    
+    
+  
+  
+
+

ADDED   applications/examples/static/epydoc/module-tree.html
Index: applications/examples/static/epydoc/module-tree.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/module-tree.html
@@ -0,0 +1,242 @@
+
+
+
+
+  Module Hierarchy
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
     
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    
+ [ Module Hierarchy
+ | Class Hierarchy ]
+

    
+
    Module Hierarchy
    
+
      
+    
    •  psycopg2: A Python driver for PostgreSQL
+
+psycopg is a PostgreSQL_ database adapter for the Python_ programming
+language.
+    
+    
      • 
+    
    •  sqlite3.dbapi2: PyMySQL: A pure-Python drop-in replacement for MySQLdb.    
      • 
+    
    •  web2py.gluon: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)
+    
        
+    
      •  web2py.gluon.admin: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
        • 
+    
      •  web2py.gluon.cache: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
        • 
+    
      •  web2py.gluon.cfs: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
        • 
+    
      •  web2py.gluon.compileapp: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
        • 
+    
      •  web2py.gluon.contenttype: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
        • 
+    
      •  web2py.gluon.contrib
+    
+    
        • 
+    
      •  web2py.gluon.custom_import    
        • 
+    
      •  web2py.gluon.dal: This file is part of the web2py Web Framework...    
        • 
+    
      •  web2py.gluon.debug: This file is part of the web2py Web Framework Developed by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu>, limodou 
+        <limodou@gmail.com> and srackham 
+        <srackham@gmail.com>.    
        • 
+    
      •  web2py.gluon.decoder    
        • 
+    
      •  web2py.gluon.fileutils: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
        • 
+    
      •  web2py.gluon.globals: This file is part of the web2py Web Framework...    
        • 
+    
      •  web2py.gluon.highlight: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
        • 
+    
      •  web2py.gluon.html: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
        • 
+    
      •  web2py.gluon.http: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
        • 
+    
      •  web2py.gluon.import_all: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
        • 
+    
      •  web2py.gluon.languages: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
        • 
+    
      •  web2py.gluon.main: This file is part of the web2py Web Framework...    
        • 
+    
      •  web2py.gluon.myregex: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
        • 
+    
      •  web2py.gluon.newcron: Created by Attila Csipa <web2py@csipa.in.rs> Modified by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu>    
        • 
+    
      •  web2py.gluon.portalocker: Cross-platform (posix/nt) API for flock-style file locking.    
        • 
+    
      •  web2py.gluon.reserved_sql_keywords    
        • 
+    
      •  web2py.gluon.restricted: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
        • 
+    
      •  web2py.gluon.rewrite: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
        • 
+    
      •  web2py.gluon.rocket    
        • 
+    
      •  web2py.gluon.sanitizer: :    
        • 
+    
      •  web2py.gluon.serializers: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
        • 
+    
      •  web2py.gluon.settings: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
        • 
+    
      •  web2py.gluon.shell: This file is part of the web2py Web Framework Developed by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu>, limodou 
+        <limodou@gmail.com> and srackham 
+        <srackham@gmail.com>.    
        • 
+    
      •  web2py.gluon.sql    
        • 
+    
      •  web2py.gluon.sqlhtml: This file is part of the web2py Web Framework...    
        • 
+    
      •  web2py.gluon.storage: This file is part of the web2py Web Framework...    
        • 
+    
      •  web2py.gluon.streamer: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
        • 
+    
      •  web2py.gluon.template: This file is part of the web2py Web Framework (Copyrighted, 2007-2011).    
        • 
+    
      •  web2py.gluon.tools: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
        • 
+    
      •  web2py.gluon.utils: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
        • 
+    
      •  web2py.gluon.validators: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
        • 
+    
      •  web2py.gluon.widget: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
        • 
+    
      •  web2py.gluon.xmlrpc: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
        • 
+    
      
+    
      • 
+    
    •  web2py.gluon.contrib.pymysql: PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
+    
      • 
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:58 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/psycopg2-module.html
Index: applications/examples/static/epydoc/psycopg2-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/psycopg2-module.html
@@ -0,0 +1,770 @@
+
+
+
+
+  psycopg2
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package psycopg2
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Package psycopg2
    source code

    
+
    +A Python driver for PostgreSQL
+
+psycopg is a PostgreSQL_ database adapter for the Python_ programming
+language. This is version 2, a complete rewrite of the original code to
+provide new-style classes for connection and cursor objects and other sweet
+candies. Like the original, psycopg 2 was written with the aim of being very
+small and fast, and stable as a rock.
+
+Homepage: http://initd.org/projects/psycopg2
+
+.. _PostgreSQL: http://www.postgresql.org/
+.. _Python: http://www.python.org/
+
+:Groups:
+  * `Connections creation`: connect
+  * `Value objects constructors`: Binary, Date, DateFromTicks, Time,
+    TimeFromTicks, Timestamp, TimestampFromTicks
+
+


    
+
+
    
+
          
    Version:
+        2.0.6 (dec mx dt ext pq3)
+      
    
+
    
+
+
+
+  
+
+  
+
    
+    
+      
+        
+        
+      
+    
    Submodules[hide private]
    
+  
    
+  
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        DataError
    
+      Error related to problems with the processed data.
+    
    
+       
+    
+        DatabaseError
    
+      Error related to the database engine.
+    
    
+       
+    
+        Error
    
+      Base class for error exceptions.
+    
    
+       
+    
+        IntegrityError
    
+      Error related to database integrity.
+    
    
+       
+    
+        InterfaceError
    
+      Error related to the database interface.
+    
    
+       
+    
+        InternalError
    
+      The database encountered an internal error.
+    
    
+       
+    
+        NotSupportedError
    
+      A not supported datbase API was called.
+    
    
+       
+    
+        OperationalError
    
+      Error related to database operation (disconnect, memory 
+        allocation etc).
+    
    
+       
+    
+        ProgrammingError
    
+      Error related to database programming (SQL error, table not 
+        found etc).
+    
    
+       
+    
+        Warning
    
+      A database warning.
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    Binary(buffer)
    
+      Build an object capable to hold a bynary string value.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    Date(year,
+        month,
+        day)
    
+      Build an object holding a date value.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    DateFromTicks(ticks)
    
+      Build an object holding a date value from the given ticks 
+      value.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    Time(hour,
+        minutes,
+        seconds,
+        tzinfo=None)
    
+      Build an object holding a time value.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    TimeFromTicks(ticks)
    
+      Build an object holding a time value from the given ticks 
+      value.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    Timestamp(year,
+        month,
+        day,
+        hour,
+        minutes,
+        seconds,
+        tzinfo=None)
    
+      Build an object holding a timestamp value.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    TimestampFromTicks(ticks)
    
+      Build an object holding a timestamp value from the given ticks 
+      value.    		
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    connect(dsn,
+        ...)
    
+      Create a new database connection.    		
+            
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        BINARY = <psycopg2._psycopg.type object at 0xd660a0>
+    
    
+       
+    
+        DATETIME = <psycopg2._psycopg.type object at 0xd5ef80>
+    
    
+       
+    
+        NUMBER = <psycopg2._psycopg.type object at 0xd5ed88>
+    
    
+       
+    
+        ROWID = <psycopg2._psycopg.type object at 0xd660d8>
+    
    
+       
+    
+        STRING = <psycopg2._psycopg.type object at 0xd5ef10>
+    
    
+       
+    
+        apilevel = '2.0'
+    
    
+       
+    
+        k = 'DatabaseError'
+    
    
+       
+    
+        paramstyle = 'pyformat'
+    
    
+       
+    
+        threadsafety = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Function Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    Binary(buffer)
+  
    
+      		 
+    
    
+  
+  Build an object capable to hold a bynary string value.
+  
    
+    
    Returns:
    
+        
    +new binary object
+
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    Date(year,
+        month,
+        day)
+  
    
+      		 
+    
    
+  
+  Build an object holding a date value.
+  
    
+    
    Returns:
    
+        
    +new date
+
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    DateFromTicks(ticks)
+  
    
+      		 
+    
    
+  
+  
    Build an object holding a date value from the given ticks value.
    
+  Ticks are the number of seconds since the epoch; see the documentation
+  of the standard Python time module for details).
+  
    
+    
    Returns:
    
+        
    +new date
+
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    Time(hour,
+        minutes,
+        seconds,
+        tzinfo=None)
+  
    
+      		 
+    
    
+  
+  Build an object holding a time value.
+  
    
+    
    Returns:
    
+        
    +new time
+
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    TimeFromTicks(ticks)
+  
    
+      		 
+    
    
+  
+  
    Build an object holding a time value from the given ticks value.
    
+  Ticks are the number of seconds since the epoch; see the documentation
+  of the standard Python time module for details).
+  
    
+    
    Returns:
    
+        
    +new time
+
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    Timestamp(year,
+        month,
+        day,
+        hour,
+        minutes,
+        seconds,
+        tzinfo=None)
+  
    
+      		 
+    
    
+  
+  Build an object holding a timestamp value.
+  
    
+    
    Returns:
    
+        
    +new timestamp
+
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    TimestampFromTicks(ticks)
+  
    
+      		 
+    
    
+  
+  
    Build an object holding a timestamp value from the given ticks 
+  value.
    
+  Ticks are the number of seconds since the epoch; see the documentation
+  of the standard Python time module for details).
+  
    
+    
    Returns:
    
+        
    +new timestamp
+
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    connect(dsn,
+        ...)
+  
    
+      		 
+    
    
+  
+  
    +Create a new database connection.
+
+This function supports two different but equivalent sets of arguments.
+A single data source name or ``dsn`` string can be used to specify the
+connection parameters, as follows::
+
+    psycopg2.connect("dbname=xxx user=xxx ...")
+
+If ``dsn`` is not provided it is possible to pass the parameters as
+keyword arguments; e.g.::
+
+    psycopg2.connect(database='xxx', user='xxx', ...)
+
+The full list of available parameters is:
+
+- ``dbname`` -- database name (only in 'dsn')
+- ``database`` -- database name (only as keyword argument)
+- ``host`` -- host address (defaults to UNIX socket if not provided)
+- ``port`` -- port number (defaults to 5432 if not provided)
+- ``user`` -- user name used to authenticate
+- ``password`` -- password used to authenticate
+- ``sslmode`` -- SSL mode (see PostgreSQL documentation)
+
+If the ``connection_factory`` keyword argument is not provided this
+function always return an instance of the `connection` class.
+Else the given sub-class of `extensions.connection` will be used to
+instantiate the connection object.
+
+:return: New database connection
+:rtype: `extensions.connection`
+
+
    
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:58 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/psycopg2-pysrc.html
Index: applications/examples/static/epydoc/psycopg2-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/psycopg2-pysrc.html
@@ -0,0 +1,225 @@
+
+
+
+
+  psycopg2
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package psycopg2
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Package psycopg2
    
+
    + 1  """A Python driver for PostgreSQL 
+ 2   
+ 3  psycopg is a PostgreSQL_ database adapter for the Python_ programming 
+ 4  language. This is version 2, a complete rewrite of the original code to 
+ 5  provide new-style classes for connection and cursor objects and other sweet 
+ 6  candies. Like the original, psycopg 2 was written with the aim of being very 
+ 7  small and fast, and stable as a rock. 
+ 8   
+ 9  Homepage: http://initd.org/projects/psycopg2 
+10   
+11  .. _PostgreSQL: http://www.postgresql.org/ 
+12  .. _Python: http://www.python.org/ 
+13   
+14  :Groups: 
+15    * `Connections creation`: connect 
+16    * `Value objects constructors`: Binary, Date, DateFromTicks, Time, 
+17      TimeFromTicks, Timestamp, TimestampFromTicks 
+18  """ 
+19  # psycopg/__init__.py - initialization of the psycopg module 
+20  # 
+21  # Copyright (C) 2003-2004 Federico Di Gregorio  <fog@debian.org> 
+22  # 
+23  # This program is free software; you can redistribute it and/or modify 
+24  # it under the terms of the GNU General Public License as published by the 
+25  # Free Software Foundation; either version 2, or (at your option) any later 
+26  # version. 
+27  # 
+28  # This program is distributed in the hope that it will be useful, but 
+29  # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY 
+30  # or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
+31  # for more details. 
+32   
+33  # Import modules needed by _psycopg to allow tools like py2exe to do 
+34  # their work without bothering about the module dependencies. 
+35  #  
+36  # TODO: we should probably use the Warnings framework to signal a missing 
+37  # module instead of raising an exception (in case we're running a thin 
+38  # embedded Python or something even more devious.) 
+39   
+40  import sys, warnings 
+41  if sys.version_info[0] >= 2 and sys.version_info[1] >= 3: 
+42      try: 
+43          import datetime as _psycopg_needs_datetime 
+44      except: 
+45          warnings.warn( 
+46              "can't import datetime module probably needed by _psycopg", 
+47              RuntimeWarning) 
+48  if sys.version_info[0] >= 2 and sys.version_info[1] >= 4: 
+49      try: 
+50          import decimal as _psycopg_needs_decimal 
+51      except: 
+52          warnings.warn( 
+53              "can't import decimal module probably needed by _psycopg", 
+54              RuntimeWarning) 
+55  from psycopg2 import tz 
+56  del sys, warnings 
+57   
+58  # Import the DBAPI-2.0 stuff into top-level module. 
+59   
+60  from _psycopg import BINARY, NUMBER, STRING, DATETIME, ROWID 
+61   
+62  from _psycopg import Binary, Date, Time, Timestamp 
+63  from _psycopg import DateFromTicks, TimeFromTicks, TimestampFromTicks 
+64   
+65  from _psycopg import Error, Warning, DataError, DatabaseError, ProgrammingError 
+66  from _psycopg import IntegrityError, InterfaceError, InternalError 
+67  from _psycopg import NotSupportedError, OperationalError 
+68   
+69  from _psycopg import connect, apilevel, threadsafety, paramstyle 
+70  from _psycopg import __version__ 
+71   
+72  __all__ = [ k for k in locals().keys() if not k.startswith('_') ] 
+73   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:03 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/psycopg2.DataError-class.html
Index: applications/examples/static/epydoc/psycopg2.DataError-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/psycopg2.DataError-class.html
@@ -0,0 +1,204 @@
+
+
+
+
+  psycopg2.DataError
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        psycopg2 ::
+        DataError ::
+        Class DataError
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class DataError
    source code

    
+
    +              object --+                    
+                       |                    
+exceptions.BaseException --+                
+                           |                
+        exceptions.Exception --+            
+                               |            
+        exceptions.StandardError --+        
+                                   |        
+                               Error --+    
+                                       |    
+                           DatabaseError --+
+                                           |
+                                          DataError
+
    
+
+
    
+Error related to problems with the processed data.

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.StandardError:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/psycopg2.DatabaseError-class.html
Index: applications/examples/static/epydoc/psycopg2.DatabaseError-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/psycopg2.DatabaseError-class.html
@@ -0,0 +1,212 @@
+
+
+
+
+  psycopg2.DatabaseError
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        psycopg2 ::
+        DatabaseError ::
+        Class DatabaseError
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class DatabaseError
    source code

    
+
    +              object --+                
+                       |                
+exceptions.BaseException --+            
+                           |            
+        exceptions.Exception --+        
+                               |        
+        exceptions.StandardError --+    
+                                   |    
+                               Error --+
+                                       |
+                                      DatabaseError
+
    
+
+
    Known Subclasses:
    
+
    
+    DataError,
+    IntegrityError,
+    InternalError,
+    NotSupportedError,
+    OperationalError,
+    ProgrammingError
+
    
+
+
    
+Error related to the database engine.

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.StandardError:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/psycopg2.Error-class.html
Index: applications/examples/static/epydoc/psycopg2.Error-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/psycopg2.Error-class.html
@@ -0,0 +1,206 @@
+
+
+
+
+  psycopg2.Error
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        psycopg2 ::
+        Error ::
+        Class Error
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Error
    source code

    
+
    +              object --+            
+                       |            
+exceptions.BaseException --+        
+                           |        
+        exceptions.Exception --+    
+                               |    
+        exceptions.StandardError --+
+                                   |
+                                  Error
+
    
+
+
    Known Subclasses:
    
+
    
+    DatabaseError,
+    InterfaceError
+
    
+
+
    
+Base class for error exceptions.

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.StandardError:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/psycopg2.IntegrityError-class.html
Index: applications/examples/static/epydoc/psycopg2.IntegrityError-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/psycopg2.IntegrityError-class.html
@@ -0,0 +1,204 @@
+
+
+
+
+  psycopg2.IntegrityError
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        psycopg2 ::
+        IntegrityError ::
+        Class IntegrityError
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IntegrityError
    source code

    
+
    +              object --+                    
+                       |                    
+exceptions.BaseException --+                
+                           |                
+        exceptions.Exception --+            
+                               |            
+        exceptions.StandardError --+        
+                                   |        
+                               Error --+    
+                                       |    
+                           DatabaseError --+
+                                           |
+                                          IntegrityError
+
    
+
+
    
+Error related to database integrity.

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.StandardError:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/psycopg2.InterfaceError-class.html
Index: applications/examples/static/epydoc/psycopg2.InterfaceError-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/psycopg2.InterfaceError-class.html
@@ -0,0 +1,202 @@
+
+
+
+
+  psycopg2.InterfaceError
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        psycopg2 ::
+        InterfaceError ::
+        Class InterfaceError
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class InterfaceError
    source code

    
+
    +              object --+                
+                       |                
+exceptions.BaseException --+            
+                           |            
+        exceptions.Exception --+        
+                               |        
+        exceptions.StandardError --+    
+                                   |    
+                               Error --+
+                                       |
+                                      InterfaceError
+
    
+
+
    
+Error related to the database interface.

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.StandardError:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/psycopg2.InternalError-class.html
Index: applications/examples/static/epydoc/psycopg2.InternalError-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/psycopg2.InternalError-class.html
@@ -0,0 +1,204 @@
+
+
+
+
+  psycopg2.InternalError
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        psycopg2 ::
+        InternalError ::
+        Class InternalError
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class InternalError
    source code

    
+
    +              object --+                    
+                       |                    
+exceptions.BaseException --+                
+                           |                
+        exceptions.Exception --+            
+                               |            
+        exceptions.StandardError --+        
+                                   |        
+                               Error --+    
+                                       |    
+                           DatabaseError --+
+                                           |
+                                          InternalError
+
    
+
+
    
+The database encountered an internal error.

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.StandardError:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/psycopg2.NotSupportedError-class.html
Index: applications/examples/static/epydoc/psycopg2.NotSupportedError-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/psycopg2.NotSupportedError-class.html
@@ -0,0 +1,204 @@
+
+
+
+
+  psycopg2.NotSupportedError
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        psycopg2 ::
+        NotSupportedError ::
+        Class NotSupportedError
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class NotSupportedError
    source code

    
+
    +              object --+                    
+                       |                    
+exceptions.BaseException --+                
+                           |                
+        exceptions.Exception --+            
+                               |            
+        exceptions.StandardError --+        
+                                   |        
+                               Error --+    
+                                       |    
+                           DatabaseError --+
+                                           |
+                                          NotSupportedError
+
    
+
+
    
+A not supported datbase API was called.

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.StandardError:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/psycopg2.OperationalError-class.html
Index: applications/examples/static/epydoc/psycopg2.OperationalError-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/psycopg2.OperationalError-class.html
@@ -0,0 +1,205 @@
+
+
+
+
+  psycopg2.OperationalError
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        psycopg2 ::
+        OperationalError ::
+        Class OperationalError
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class OperationalError
    source code

    
+
    +              object --+                    
+                       |                    
+exceptions.BaseException --+                
+                           |                
+        exceptions.Exception --+            
+                               |            
+        exceptions.StandardError --+        
+                                   |        
+                               Error --+    
+                                       |    
+                           DatabaseError --+
+                                           |
+                                          OperationalError
+
    
+
+
    
+Error related to database operation (disconnect, memory allocation 
+  etc).

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.StandardError:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/psycopg2.ProgrammingError-class.html
Index: applications/examples/static/epydoc/psycopg2.ProgrammingError-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/psycopg2.ProgrammingError-class.html
@@ -0,0 +1,205 @@
+
+
+
+
+  psycopg2.ProgrammingError
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        psycopg2 ::
+        ProgrammingError ::
+        Class ProgrammingError
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class ProgrammingError
    source code

    
+
    +              object --+                    
+                       |                    
+exceptions.BaseException --+                
+                           |                
+        exceptions.Exception --+            
+                               |            
+        exceptions.StandardError --+        
+                                   |        
+                               Error --+    
+                                       |    
+                           DatabaseError --+
+                                           |
+                                          ProgrammingError
+
    
+
+
    
+Error related to database programming (SQL error, table not found 
+  etc).

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.StandardError:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/psycopg2.Warning-class.html
Index: applications/examples/static/epydoc/psycopg2.Warning-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/psycopg2.Warning-class.html
@@ -0,0 +1,200 @@
+
+
+
+
+  psycopg2.Warning
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        psycopg2 ::
+        Warning ::
+        Class Warning
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Warning
    source code

    
+
    +              object --+            
+                       |            
+exceptions.BaseException --+        
+                           |        
+        exceptions.Exception --+    
+                               |    
+        exceptions.StandardError --+
+                                   |
+                                  Warning
+
    
+
+
    
+A database warning.

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.StandardError:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/psycopg2.tz-module.html
Index: applications/examples/static/epydoc/psycopg2.tz-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/psycopg2.tz-module.html
@@ -0,0 +1,207 @@
+
+
+
+
+  psycopg2.tz
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package psycopg2 ::
+        Module tz
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module tz
    source code

    
+
    tzinfo implementations for psycopg2
    
+  This module holds two different tzinfo implementations that can be 
+  used as the 'tzinfo' argument to datetime constructors, directly passed 
+  to psycopg functions or used to set the .tzinfo_factory attribute in 
+  cursors.

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        FixedOffsetTimezone
    
+      Fixed offset in minutes east from UTC.
+    
    
+       
+    
+        LocalTimezone
    
+      Platform idea of local timezone.
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        DSTDIFF = datetime.timedelta(0, 3600)
+    
    
+       
+    
+        DSTOFFSET = datetime.timedelta(0, 3600)
+    
    
+       
+    
+        LOCAL = <psycopg2.tz.LocalTimezone object at 0xd4e690>
+    
    
+       
+    
+        STDOFFSET = datetime.timedelta(0)
+    
    
+       
+    
+        ZERO = datetime.timedelta(0)
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:58 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/psycopg2.tz-pysrc.html
Index: applications/examples/static/epydoc/psycopg2.tz-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/psycopg2.tz-pysrc.html
@@ -0,0 +1,221 @@
+
+
+
+
+  psycopg2.tz
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package psycopg2 ::
+        Module tz
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module psycopg2.tz
    
+
    +  1  """tzinfo implementations for psycopg2 
+  2   
+  3  This module holds two different tzinfo implementations that can be used as 
+  4  the 'tzinfo' argument to datetime constructors, directly passed to psycopg 
+  5  functions or used to set the .tzinfo_factory attribute in cursors.  
+  6  """ 
+  7  # psycopg/tz.py - tzinfo implementation 
+  8  # 
+  9  # Copyright (C) 2003-2004 Federico Di Gregorio  <fog@debian.org> 
+ 10  # 
+ 11  # This program is free software; you can redistribute it and/or modify 
+ 12  # it under the terms of the GNU General Public License as published by the 
+ 13  # Free Software Foundation; either version 2, or (at your option) any later 
+ 14  # version. 
+ 15  # 
+ 16  # This program is distributed in the hope that it will be useful, but 
+ 17  # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY 
+ 18  # or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
+ 19  # for more details. 
+ 20   
+ 21  import datetime 
+ 22  import time 
+ 23   
+ 24   
+ 25  ZERO = datetime.timedelta(0) 
+ 26   
+
     27 -class FixedOffsetTimezone(datetime.tzinfo): 
+
     28      """Fixed offset in minutes east from UTC. 
+ 29   
+ 30      This is exactly the implementation found in Python 2.3.x documentation, 
+ 31      with a small change to the __init__ method to allow for pickling and a 
+ 32      default name in the form 'sHH:MM' ('s' is the sign.) 
+ 33      """ 
+ 34      _name = None 
+ 35      _offset = ZERO 
+ 36       
+
     37 -    def __init__(self, offset=None, name=None): 
+
     38          if offset is not None: 
+ 39              self._offset = datetime.timedelta(minutes = offset) 
+ 40          if name is not None: 
+ 41              self._name = name 
+
     42   
+
     43 -    def utcoffset(self, dt): 
+
     44          return self._offset 
+
     45   
+
     46 -    def tzname(self, dt): 
+
     47          if self._name is not None: 
+ 48              return self._name 
+ 49          else: 
+ 50              seconds = self._offset.seconds + self._offset.days * 86400 
+ 51              hours, seconds = divmod(seconds, 3600) 
+ 52              minutes = seconds/60 
+ 53              if minutes: 
+ 54                  return "%+03d:%d" % (hours, minutes) 
+ 55              else: 
+ 56                  return "%+03d" % hours 
+
     57               
+
     58 -    def dst(self, dt): 
+
     59          return ZERO 
+
     60   
+ 61   
+ 62  STDOFFSET = datetime.timedelta(seconds = -time.timezone) 
+ 63  if time.daylight: 
+ 64      DSTOFFSET = datetime.timedelta(seconds = -time.altzone) 
+ 65  else: 
+ 66      DSTOFFSET = STDOFFSET 
+ 67  DSTDIFF = DSTOFFSET - STDOFFSET 
+ 68   
+
     69 -class LocalTimezone(datetime.tzinfo): 
+
     70      """Platform idea of local timezone. 
+ 71   
+ 72      This is the exact implementation from the Pyhton 2.3 documentation. 
+ 73      """ 
+ 74       
+
     75 -    def utcoffset(self, dt): 
+
     76          if self._isdst(dt): 
+ 77              return DSTOFFSET 
+ 78          else: 
+ 79              return STDOFFSET 
+
     80   
+
     81 -    def dst(self, dt): 
+
     82          if self._isdst(dt): 
+ 83              return DSTDIFF 
+ 84          else: 
+ 85              return ZERO 
+
     86   
+
     87 -    def tzname(self, dt): 
+
     88          return time.tzname[self._isdst(dt)] 
+
     89   
+
     90 -    def _isdst(self, dt): 
+
     91          tt = (dt.year, dt.month, dt.day, 
+ 92                dt.hour, dt.minute, dt.second, 
+ 93                dt.weekday(), 0, -1) 
+ 94          stamp = time.mktime(tt) 
+ 95          tt = time.localtime(stamp) 
+ 96          return tt.tm_isdst > 0 
+
     97   
+ 98  LOCAL = LocalTimezone() 
+ 99   
+100  # TODO: pre-generate some interesting time zones? 
+101   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:05 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/psycopg2.tz.FixedOffsetTimezone-class.html
Index: applications/examples/static/epydoc/psycopg2.tz.FixedOffsetTimezone-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/psycopg2.tz.FixedOffsetTimezone-class.html
@@ -0,0 +1,416 @@
+
+
+
+
+  psycopg2.tz.FixedOffsetTimezone
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        psycopg2 ::
+        tz ::
+        FixedOffsetTimezone ::
+        Class FixedOffsetTimezone
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class FixedOffsetTimezone
    source code

    
+
    +     object --+    
+              |    
+datetime.tzinfo --+
+                  |
+                 FixedOffsetTimezone
+
    
+
+
    
+
    Fixed offset in minutes east from UTC.
    
+  This is exactly the implementation found in Python 2.3.x 
+  documentation, with a small change to the __init__ method to allow for 
+  pickling and a default name in the form 'sHH:MM' ('s' is the sign.)

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        offset=1,
+        name=1)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    dst(self,
+        dt)
    
+      datetime -> DST offset in minutes east of UTC.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    tzname(self,
+        dt)
    
+      datetime -> string name of time zone.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    utcoffset(self,
+        dt)
    
+      datetime -> minutes east of UTC (negative for west of UTC).    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from datetime.tzinfo:
+      __getattribute__,
+      __new__,
+      __reduce__,
+      fromutc
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __hash__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        _name = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        _offset = datetime.timedelta(0)
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        offset=1,
+        name=1)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    dst(self,
+        dt)
+  
    
+      		source code 
+    
    
+  
+  datetime -> DST offset in minutes east of UTC.
+  
    
+    
    Overrides:
+      datetime.tzinfo.dst
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    tzname(self,
+        dt)
+  
    
+      		source code 
+    
    
+  
+  datetime -> string name of time zone.
+  
    
+    
    Overrides:
+      datetime.tzinfo.tzname
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    utcoffset(self,
+        dt)
+  
    
+      		source code 
+    
    
+  
+  datetime -> minutes east of UTC (negative for west of UTC).
+  
    
+    
    Overrides:
+      datetime.tzinfo.utcoffset
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/psycopg2.tz.LocalTimezone-class.html
Index: applications/examples/static/epydoc/psycopg2.tz.LocalTimezone-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/psycopg2.tz.LocalTimezone-class.html
@@ -0,0 +1,353 @@
+
+
+
+
+  psycopg2.tz.LocalTimezone
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        psycopg2 ::
+        tz ::
+        LocalTimezone ::
+        Class LocalTimezone
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class LocalTimezone
    source code

    
+
    +     object --+    
+              |    
+datetime.tzinfo --+
+                  |
+                 LocalTimezone
+
    
+
+
    
+
    Platform idea of local timezone.
    
+  This is the exact implementation from the Pyhton 2.3 
+  documentation.

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    _isdst(self,
+        dt)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    dst(self,
+        dt)
    
+      datetime -> DST offset in minutes east of UTC.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    tzname(self,
+        dt)
    
+      datetime -> string name of time zone.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    utcoffset(self,
+        dt)
    
+      datetime -> minutes east of UTC (negative for west of UTC).    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from datetime.tzinfo:
+      __getattribute__,
+      __new__,
+      __reduce__,
+      fromutc
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __hash__,
+      __init__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    dst(self,
+        dt)
+  
    
+      		source code 
+    
    
+  
+  datetime -> DST offset in minutes east of UTC.
+  
    
+    
    Overrides:
+      datetime.tzinfo.dst
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    tzname(self,
+        dt)
+  
    
+      		source code 
+    
    
+  
+  datetime -> string name of time zone.
+  
    
+    
    Overrides:
+      datetime.tzinfo.tzname
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    utcoffset(self,
+        dt)
+  
    
+      		source code 
+    
    
+  
+  datetime -> minutes east of UTC (negative for west of UTC).
+  
    
+    
    Overrides:
+      datetime.tzinfo.utcoffset
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/redirect.html
Index: applications/examples/static/epydoc/redirect.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/redirect.html
@@ -0,0 +1,38 @@
+Epydoc Redirect Page
+
+
+
+  
+
+
+
+
+
    Epydoc Auto-redirect page
    
+
+
    When javascript is enabled, this page will redirect URLs of
+the form redirect.html#dotted.name to the
+documentation for the object with the given fully-qualified
+dotted name.
    
+
       
    
+
+
+
+
+

ADDED   applications/examples/static/epydoc/sqlite3.dbapi2-module.html
Index: applications/examples/static/epydoc/sqlite3.dbapi2-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/sqlite3.dbapi2-module.html
@@ -0,0 +1,589 @@
+
+
+
+
+  sqlite3.dbapi2
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package sqlite3 ::
+        Module dbapi2
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module dbapi2
    source code

    
+
    PyMySQL: A pure-Python drop-in replacement for MySQLdb.
    
+  
    Copyright (c) 2010 PyMySQL contributors
    
+  
    Permission is hereby granted, free of charge, to any person obtaining 
+  a copy of this software and associated documentation files (the 
+  "Software"), to deal in the Software without restriction, 
+  including without limitation the rights to use, copy, modify, merge, 
+  publish, distribute, sublicense, and/or sell copies of the Software, and 
+  to permit persons to whom the Software is furnished to do so, subject to 
+  the following conditions:
    
+  
    The above copyright notice and this permission notice shall be 
+  included in all copies or substantial portions of the Software.
    
+  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY 
+  KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 
+  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
+  NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, 
+  DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR 
+  OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+  USE OR OTHER DEALINGS IN THE SOFTWARE.

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    DateFromTicks(ticks)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    TimeFromTicks(ticks)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    TimestampFromTicks(ticks)
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        PARSE_COLNAMES = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        PARSE_DECLTYPES = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        SQLITE_ALTER_TABLE = 26
+    
    
+       
+    
+        SQLITE_ANALYZE = 28
+    
    
+       
+    
+        SQLITE_ATTACH = 24
+    
    
+       
+    
+        SQLITE_CREATE_INDEX = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        SQLITE_CREATE_TABLE = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        SQLITE_CREATE_TEMP_INDEX = 3
+    
    
+       
+    
+        SQLITE_CREATE_TEMP_TABLE = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        SQLITE_CREATE_TEMP_TRIGGER = 5
+    
    
+       
+    
+        SQLITE_CREATE_TEMP_VIEW = 6
+    
    
+       
+    
+        SQLITE_CREATE_TRIGGER = 7
+    
    
+       
+    
+        SQLITE_CREATE_VIEW = 8
+    
    
+       
+    
+        SQLITE_DELETE = 9
+    
    
+       
+    
+        SQLITE_DENY = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        SQLITE_DETACH = 25
+    
    
+       
+    
+        SQLITE_DROP_INDEX = 10
+    
    
+       
+    
+        SQLITE_DROP_TABLE = 11
+    
    
+       
+    
+        SQLITE_DROP_TEMP_INDEX = 12
+    
    
+       
+    
+        SQLITE_DROP_TEMP_TABLE = 13
+    
    
+       
+    
+        SQLITE_DROP_TEMP_TRIGGER = 14
+    
    
+       
+    
+        SQLITE_DROP_TEMP_VIEW = 15
+    
    
+       
+    
+        SQLITE_DROP_TRIGGER = 16
+    
    
+       
+    
+        SQLITE_DROP_VIEW = 17
+    
    
+       
+    
+        SQLITE_IGNORE = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        SQLITE_INSERT = 18
+    
    
+       
+    
+        SQLITE_OK = 0
+    
    
+       
+    
+        SQLITE_PRAGMA = 19
+    
    
+       
+    
+        SQLITE_READ = 20
+    
    
+       
+    
+        SQLITE_REINDEX = 27
+    
    
+       
+    
+        SQLITE_SELECT = 21
+    
    
+       
+    
+        SQLITE_TRANSACTION = 22
+    
    
+       
+    
+        SQLITE_UPDATE = 23
+    
    
+       
+    
+        adapters = {(<type 'datetime.date'>, <type 'sqlite3.PreparePro...
+    
    
+       
+    
+        apilevel = '2.0'
+    
    
+       
+    
+        converters = {'DATE': <function convert_date at 0xd25668>, 'TI...
+    
    
+       
+    
+        paramstyle = 'qmark'
+    
    
+       
+    
+        sqlite_version = '3.4.2'
+    
    
+       
+    
+        sqlite_version_info = (3, 4, 2)
+    
    
+       
+    
+        threadsafety = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        version = '2.3.2'
+    
    
+       
+    
+        version_info = (2, 3, 2)
+    
    
+       
+    
+        x = '2'
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Variables Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    adapters
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{(<type 'datetime.date'>, <type 'sqlite3.PrepareProtocol'>): <function\
+ adapt_date at 0xd25578>,
+ (<type 'datetime.datetime'>, <type 'sqlite3.PrepareProtocol'>): <func\
+tion adapt_datetime at 0xd255f0>}
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    converters
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'DATE': <function convert_date at 0xd25668>,
+ 'TIMESTAMP': <function convert_timestamp at 0xd256e0>}
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:58 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/sqlite3.dbapi2-pysrc.html
Index: applications/examples/static/epydoc/sqlite3.dbapi2-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/sqlite3.dbapi2-pysrc.html
@@ -0,0 +1,217 @@
+
+
+
+
+  sqlite3.dbapi2
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package sqlite3 ::
+        Module dbapi2
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module sqlite3.dbapi2
    
+
    + 1  #-*- coding: ISO-8859-1 -*- 
+ 2  # pysqlite2/dbapi2.py: the DB-API 2.0 interface 
+ 3  # 
+ 4  # Copyright (C) 2004-2005 Gerhard Häring <gh@ghaering.de> 
+ 5  # 
+ 6  # This file is part of pysqlite. 
+ 7  # 
+ 8  # This software is provided 'as-is', without any express or implied 
+ 9  # warranty.  In no event will the authors be held liable for any damages 
+10  # arising from the use of this software. 
+11  # 
+12  # Permission is granted to anyone to use this software for any purpose, 
+13  # including commercial applications, and to alter it and redistribute it 
+14  # freely, subject to the following restrictions: 
+15  # 
+16  # 1. The origin of this software must not be misrepresented; you must not 
+17  #    claim that you wrote the original software. If you use this software 
+18  #    in a product, an acknowledgment in the product documentation would be 
+19  #    appreciated but is not required. 
+20  # 2. Altered source versions must be plainly marked as such, and must not be 
+21  #    misrepresented as being the original software. 
+22  # 3. This notice may not be removed or altered from any source distribution. 
+23   
+24  import datetime 
+25  import time 
+26   
+27  from _sqlite3 import * 
+28   
+29  paramstyle = "qmark" 
+30   
+31  threadsafety = 1 
+32   
+33  apilevel = "2.0" 
+34   
+35  Date = datetime.date 
+36   
+37  Time = datetime.time 
+38   
+39  Timestamp = datetime.datetime 
+40   
+
    41 -def DateFromTicks(ticks): 
+
    42      return apply(Date, time.localtime(ticks)[:3]) 
+
    43   
+
    44 -def TimeFromTicks(ticks): 
+
    45      return apply(Time, time.localtime(ticks)[3:6]) 
+
    46   
+
    47 -def TimestampFromTicks(ticks): 
+
    48      return apply(Timestamp, time.localtime(ticks)[:6]) 
+
    49   
+50  version_info = tuple([int(x) for x in version.split(".")]) 
+51  sqlite_version_info = tuple([int(x) for x in sqlite_version.split(".")]) 
+52   
+53  Binary = buffer 
+54   
+
    56      def adapt_date(val): 
+57          return val.isoformat() 
+
    58   
+59      def adapt_datetime(val): 
+60          return val.isoformat(" ") 
+61   
+62      def convert_date(val): 
+63          return datetime.date(*map(int, val.split("-"))) 
+64   
+65      def convert_timestamp(val): 
+66          datepart, timepart = val.split(" ") 
+67          year, month, day = map(int, datepart.split("-")) 
+68          timepart_full = timepart.split(".") 
+69          hours, minutes, seconds = map(int, timepart_full[0].split(":")) 
+70          if len(timepart_full) == 2: 
+71              microseconds = int(float("0." + timepart_full[1]) * 1000000) 
+72          else: 
+73              microseconds = 0 
+74   
+75          val = datetime.datetime(year, month, day, hours, minutes, seconds, microseconds) 
+76          return val 
+77   
+78   
+79      register_adapter(datetime.date, adapt_date) 
+80      register_adapter(datetime.datetime, adapt_datetime) 
+81      register_converter("date", convert_date) 
+82      register_converter("timestamp", convert_timestamp) 
+83   
+84  register_adapters_and_converters() 
+85   
+86  # Clean up namespace 
+87   
+88  del(register_adapters_and_converters) 
+89   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:03 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/title.png
Index: applications/examples/static/epydoc/title.png
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/title.png
cannot compute difference between binary files

ADDED   applications/examples/static/epydoc/toc-everything.html
Index: applications/examples/static/epydoc/toc-everything.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-everything.html
@@ -0,0 +1,1868 @@
+
+
+
+
+  Everything
+  
+  
+
+
+
+
    Everything
    
+
    
+  
    All Classes
    
+    datetime.date
        datetime.datetime
        datetime.time
        exceptions.Exception
        psycopg2.DataError
        psycopg2.DatabaseError
        psycopg2.Error
        psycopg2.IntegrityError
        psycopg2.InterfaceError
        psycopg2.InternalError
        psycopg2.NotSupportedError
        psycopg2.OperationalError
        psycopg2.ProgrammingError
        psycopg2.Warning
        psycopg2.tz.FixedOffsetTimezone
        psycopg2.tz.LocalTimezone
        web2py.gluon.cache.Cache
      
    
+    web2py.gluon.cache.CacheAbstract
      
    
+  
    
+    web2py.gluon.cache.CacheInRam
      
    
+  
    
+    web2py.gluon.cache.CacheOnDisk
      
    
+    web2py.gluon.compileapp.LoadFactory
        web2py.gluon.compileapp.mybuiltin
      
    
+    web2py.gluon.contrib.pymysql.DBAPISet
      
    
+  
    
+    web2py.gluon.contrib.pymysql.err.DataError
      
    
+  
    
+    web2py.gluon.contrib.pymysql.err.DatabaseError
      
    
+  
    
+    web2py.gluon.contrib.pymysql.err.Error
      
    
+  
    
+    web2py.gluon.contrib.pymysql.err.IntegrityError
      
    
+  
    
+    web2py.gluon.contrib.pymysql.err.InterfaceError
      
    
+  
    
+    web2py.gluon.contrib.pymysql.err.InternalError
      
    
+  
    
+    web2py.gluon.contrib.pymysql.err.NotSupportedError
      
    
+  
    
+    web2py.gluon.contrib.pymysql.err.OperationalError
      
    
+  
    
+    web2py.gluon.contrib.pymysql.err.ProgrammingError
      
    
+  
    
+    web2py.gluon.contrib.pymysql.err.Warning
      
    
+  
    
+    web2py.gluon.custom_import._BaseImporter
      
    
+  
    
+    web2py.gluon.custom_import._DateTrackerImporter
      
    
+  
    
+    web2py.gluon.custom_import._Web2pyDateTrackerImporter
      
    
+  
    
+    web2py.gluon.custom_import._Web2pyImporter
      
    
+  
    
+    web2py.gluon.dal.BaseAdapter
      
    
+  
    
+    web2py.gluon.dal.ConnectionPool
      
    
+  
    
+    web2py.gluon.dal.CouchDBAdapter
      
    
+  
    
+    web2py.gluon.dal.CubridAdapter
      
    
+  
    
+    web2py.gluon.dal.DAL
      
    
+  
    
+    web2py.gluon.dal.DB2Adapter
      
    
+  
    
+    web2py.gluon.dal.DatabaseStoredFile
      
    
+  
    
+    web2py.gluon.dal.Expression
      
    
+  
    
+    web2py.gluon.dal.Field
      
    
+  
    
+    web2py.gluon.dal.FireBirdAdapter
      
    
+  
    
+    web2py.gluon.dal.FireBirdEmbeddedAdapter
      
    
+  
    
+    web2py.gluon.dal.GAEDecimalProperty
      
    
+  
    
+    web2py.gluon.dal.GAEF
      
    
+  
    
+    web2py.gluon.dal.GoogleDatastoreAdapter
      
    
+  
    
+    web2py.gluon.dal.GoogleSQLAdapter
      
    
+  
    
+    web2py.gluon.dal.InformixAdapter
      
    
+  
    
+    web2py.gluon.dal.IngresAdapter
      
    
+  
    
+    web2py.gluon.dal.IngresUnicodeAdapter
      
    
+  
    
+    web2py.gluon.dal.JDBCPostgreSQLAdapter
      
    
+  
    
+    web2py.gluon.dal.JDBCSQLiteAdapter
      
    
+  
    
+    web2py.gluon.dal.MSSQL2Adapter
      
    
+  
    
+    web2py.gluon.dal.MSSQLAdapter
      
    
+  
    
+    web2py.gluon.dal.MongoDBAdapter
      
    
+  
    
+    web2py.gluon.dal.MySQLAdapter
      
    
+  
    
+    web2py.gluon.dal.NoSQLAdapter
      
    
+  
    
+    web2py.gluon.dal.OracleAdapter
      
    
+  
    
+    web2py.gluon.dal.PostgreSQLAdapter
      
    
+  
    
+    web2py.gluon.dal.Query
      
    
+  
    
+    web2py.gluon.dal.Reference
      
    
+  
    
+    web2py.gluon.dal.Row
      
    
+  
    
+    web2py.gluon.dal.Rows
      
    
+  
    
+    web2py.gluon.dal.SAPDBAdapter
      
    
+  
    
+    web2py.gluon.dal.SQLALL
      
    
+  
    
+    web2py.gluon.dal.SQLCallableList
      
    
+  
    
+    web2py.gluon.dal.SQLCustomType
      
    
+  
    
+    web2py.gluon.dal.SQLiteAdapter
      
    
+  
    
+    web2py.gluon.dal.Set
      
    
+  
    
+    web2py.gluon.dal.Table
      
    
+  
    
+    web2py.gluon.dal.TeradataAdapter
      
    
+  
    
+    web2py.gluon.dal.UseDatabaseStoredFile
      
    
+    web2py.gluon.debug.Pipe
      
    
+    web2py.gluon.globals.Request
      
    
+  
    
+    web2py.gluon.globals.Response
      
    
+  
    
+    web2py.gluon.globals.Session
      
    
+  
    
+    web2py.gluon.highlight.Highlighter
      
    
+  
    
+    web2py.gluon.html.A
      
    
+  
    
+    web2py.gluon.html.B
      
    
+  
    
+    web2py.gluon.html.BEAUTIFY
      
    
+  
    
+    web2py.gluon.html.BODY
      
    
+  
    
+    web2py.gluon.html.BR
      
    
+  
    
+    web2py.gluon.html.BUTTON
      
    
+  
    
+    web2py.gluon.html.CAT
      
    
+  
    
+    web2py.gluon.html.CENTER
      
    
+  
    
+    web2py.gluon.html.CODE
      
    
+  
    
+    web2py.gluon.html.COL
      
    
+  
    
+    web2py.gluon.html.COLGROUP
      
    
+  
    
+    web2py.gluon.html.DIV
      
    
+  
    
+    web2py.gluon.html.EM
      
    
+  
    
+    web2py.gluon.html.EMBED
      
    
+  
    
+    web2py.gluon.html.FIELDSET
      
    
+  
    
+    web2py.gluon.html.FORM
      
    
+  
    
+    web2py.gluon.html.H1
      
    
+  
    
+    web2py.gluon.html.H2
      
    
+  
    
+    web2py.gluon.html.H3
      
    
+  
    
+    web2py.gluon.html.H4
      
    
+  
    
+    web2py.gluon.html.H5
      
    
+  
    
+    web2py.gluon.html.H6
      
    
+  
    
+    web2py.gluon.html.HEAD
      
    
+  
    
+    web2py.gluon.html.HR
      
    
+  
    
+    web2py.gluon.html.HTML
      
    
+  
    
+    web2py.gluon.html.I
      
    
+  
    
+    web2py.gluon.html.IFRAME
      
    
+  
    
+    web2py.gluon.html.IMG
      
    
+  
    
+    web2py.gluon.html.INPUT
      
    
+  
    
+    web2py.gluon.html.LABEL
      
    
+  
    
+    web2py.gluon.html.LEGEND
      
    
+  
    
+    web2py.gluon.html.LI
      
    
+  
    
+    web2py.gluon.html.LINK
      
    
+  
    
+    web2py.gluon.html.MARKMIN
      
    
+  
    
+    web2py.gluon.html.MENU
      
    
+  
    
+    web2py.gluon.html.META
      
    
+  
    
+    web2py.gluon.html.OBJECT
      
    
+  
    
+    web2py.gluon.html.OL
      
    
+  
    
+    web2py.gluon.html.OPTGROUP
      
    
+  
    
+    web2py.gluon.html.OPTION
      
    
+  
    
+    web2py.gluon.html.P
      
    
+  
    
+    web2py.gluon.html.PRE
      
    
+  
    
+    web2py.gluon.html.SCRIPT
      
    
+  
    
+    web2py.gluon.html.SELECT
      
    
+  
    
+    web2py.gluon.html.SPAN
      
    
+  
    
+    web2py.gluon.html.STYLE
      
    
+  
    
+    web2py.gluon.html.TABLE
      
    
+  
    
+    web2py.gluon.html.TBODY
      
    
+  
    
+    web2py.gluon.html.TD
      
    
+  
    
+    web2py.gluon.html.TEXTAREA
      
    
+  
    
+    web2py.gluon.html.TFOOT
      
    
+  
    
+    web2py.gluon.html.TH
      
    
+  
    
+    web2py.gluon.html.THEAD
      
    
+  
    
+    web2py.gluon.html.TITLE
      
    
+  
    
+    web2py.gluon.html.TR
      
    
+  
    
+    web2py.gluon.html.TT
      
    
+  
    
+    web2py.gluon.html.UL
      
    
+  
    
+    web2py.gluon.html.XHTML
      
    
+  
    
+    web2py.gluon.html.XML
      
    
+  
    
+    web2py.gluon.html.XmlComponent
      
    
+  
    
+    web2py.gluon.html.__TAG__
      
    
+  
    
+    web2py.gluon.html.web2pyHTMLParser
      
    
+  
    
+    web2py.gluon.http.HTTP
      
    
+  
    
+    web2py.gluon.languages.lazyT
      
    
+  
    
+    web2py.gluon.languages.translator
      
    
+    web2py.gluon.main.HttpServer
        web2py.gluon.newcron.Token
        web2py.gluon.newcron.cronlauncher
        web2py.gluon.newcron.extcron
        web2py.gluon.newcron.hardcron
        web2py.gluon.newcron.softcron
        web2py.gluon.restricted.RestrictedError
        web2py.gluon.restricted.TicketStorage
      
    
+    web2py.gluon.rewrite.MapUrlIn
      
    
+  
    
+    web2py.gluon.rewrite.MapUrlOut
      
    
+  
    
+    web2py.gluon.rocket.BadRequest
      
    
+  
    
+    web2py.gluon.rocket.ChunkedReader
      
    
+  
    
+    web2py.gluon.rocket.Connection
      
    
+  
    
+    web2py.gluon.rocket.FileWrapper
      
    
+  
    
+    web2py.gluon.rocket.Headers
      
    
+  
    
+    web2py.gluon.rocket.Listener
      
    
+  
    
+    web2py.gluon.rocket.Monitor
      
    
+    web2py.gluon.rocket.NullHandler
        web2py.gluon.rocket.Rocket
      
    
+    web2py.gluon.rocket.SSLError
      
    
+  
    
+    web2py.gluon.rocket.SocketClosed
      
    
+  
    
+    web2py.gluon.rocket.SocketTimeout
      
    
+  
    
+    web2py.gluon.rocket.ThreadPool
      
    
+  
    
+    web2py.gluon.rocket.WSGIWorker
      
    
+  
    
+    web2py.gluon.rocket.Worker
      
    
+  
    
+    web2py.gluon.sanitizer.XssCleaner
      
    
+  
    
+    web2py.gluon.sqlhtml.AutocompleteWidget
      
    
+  
    
+    web2py.gluon.sqlhtml.BooleanWidget
      
    
+  
    
+    web2py.gluon.sqlhtml.CheckboxesWidget
      
    
+  
    
+    web2py.gluon.sqlhtml.DateWidget
      
    
+  
    
+    web2py.gluon.sqlhtml.DatetimeWidget
      
    
+  
    
+    web2py.gluon.sqlhtml.DecimalWidget
      
    
+  
    
+    web2py.gluon.sqlhtml.DoubleWidget
      
    
+  
    
+    web2py.gluon.sqlhtml.FormWidget
      
    
+  
    
+    web2py.gluon.sqlhtml.IntegerWidget
      
    
+  
    
+    web2py.gluon.sqlhtml.ListWidget
      
    
+  
    
+    web2py.gluon.sqlhtml.MultipleOptionsWidget
      
    
+  
    
+    web2py.gluon.sqlhtml.OptionsWidget
      
    
+  
    
+    web2py.gluon.sqlhtml.PasswordWidget
      
    
+  
    
+    web2py.gluon.sqlhtml.RadioWidget
      
    
+  
    
+    web2py.gluon.sqlhtml.SQLFORM
      
    
+  
    
+    web2py.gluon.sqlhtml.SQLTABLE
      
    
+  
    
+    web2py.gluon.sqlhtml.StringWidget
      
    
+  
    
+    web2py.gluon.sqlhtml.TextWidget
      
    
+  
    
+    web2py.gluon.sqlhtml.TimeWidget
      
    
+  
    
+    web2py.gluon.sqlhtml.UploadWidget
      
    
+  
    
+    web2py.gluon.storage.List
      
    
+  
    
+    web2py.gluon.storage.Messages
      
    
+  
    
+    web2py.gluon.storage.Settings
      
    
+  
    
+    web2py.gluon.storage.Storage
      
    
+  
    
+    web2py.gluon.storage.StorageList
      
    
+    web2py.gluon.template.BlockNode
        web2py.gluon.template.Content
        web2py.gluon.template.Node
        web2py.gluon.template.SuperNode
        web2py.gluon.template.TemplateParser
        web2py.gluon.tools.Auth
        web2py.gluon.tools.Crud
        web2py.gluon.tools.Mail
        web2py.gluon.tools.Mail.Attachment
        web2py.gluon.tools.PluginManager
        web2py.gluon.tools.Recaptcha
        web2py.gluon.tools.Service
        web2py.gluon.tools.Service.JsonRpcException
      
    
+    web2py.gluon.validators.CLEANUP
      
    
+  
    
+    web2py.gluon.validators.CRYPT
      
    
+  
    
+    web2py.gluon.validators.IS_ALPHANUMERIC
      
    
+  
    
+    web2py.gluon.validators.IS_DATE
      
    
+  
    
+    web2py.gluon.validators.IS_DATETIME
      
    
+  
    
+    web2py.gluon.validators.IS_DATETIME_IN_RANGE
      
    
+  
    
+    web2py.gluon.validators.IS_DATE_IN_RANGE
      
    
+  
    
+    web2py.gluon.validators.IS_DECIMAL_IN_RANGE
      
    
+  
    
+    web2py.gluon.validators.IS_EMAIL
      
    
+  
    
+    web2py.gluon.validators.IS_EMPTY_OR
      
    
+  
    
+    web2py.gluon.validators.IS_EQUAL_TO
      
    
+  
    
+    web2py.gluon.validators.IS_EXPR
      
    
+  
    
+    web2py.gluon.validators.IS_FLOAT_IN_RANGE
      
    
+  
    
+    web2py.gluon.validators.IS_GENERIC_URL
      
    
+  
    
+    web2py.gluon.validators.IS_HTTP_URL
      
    
+  
    
+    web2py.gluon.validators.IS_IMAGE
      
    
+  
    
+    web2py.gluon.validators.IS_INT_IN_RANGE
      
    
+  
    
+    web2py.gluon.validators.IS_IN_DB
      
    
+  
    
+    web2py.gluon.validators.IS_IN_SET
      
    
+  
    
+    web2py.gluon.validators.IS_IN_SUBSET
      
    
+  
    
+    web2py.gluon.validators.IS_IPV4
      
    
+  
    
+    web2py.gluon.validators.IS_LENGTH
      
    
+  
    
+    web2py.gluon.validators.IS_LIST_OF
      
    
+  
    
+    web2py.gluon.validators.IS_LOWER
      
    
+  
    
+    web2py.gluon.validators.IS_MATCH
      
    
+  
    
+    web2py.gluon.validators.IS_NOT_EMPTY
      
    
+  
    
+    web2py.gluon.validators.IS_NOT_IN_DB
      
    
+  
    
+    web2py.gluon.validators.IS_SLUG
      
    
+  
    
+    web2py.gluon.validators.IS_STRONG
      
    
+  
    
+    web2py.gluon.validators.IS_TIME
      
    
+  
    
+    web2py.gluon.validators.IS_UPLOAD_FILENAME
      
    
+  
    
+    web2py.gluon.validators.IS_UPPER
      
    
+  
    
+    web2py.gluon.validators.IS_URL
      
    
+  
    
+    web2py.gluon.validators.Validator
      
    
+    web2py.gluon.widget.IO
        web2py.gluon.widget.web2pyDialog
      
    
+    web2py.gluon.winservice.Service
      
    
+  
    
+    web2py.gluon.winservice.Web2pyService
      
    
+  
    All Functions
    
+    web2py.gluon.admin.add_path_first
        web2py.gluon.admin.apath
        web2py.gluon.admin.app_cleanup
        web2py.gluon.admin.app_compile
        web2py.gluon.admin.app_create
        web2py.gluon.admin.app_install
        web2py.gluon.admin.app_pack
        web2py.gluon.admin.app_pack_compiled
        web2py.gluon.admin.app_uninstall
        web2py.gluon.admin.check_new_version
        web2py.gluon.admin.create_missing_app_folders
        web2py.gluon.admin.create_missing_folders
        web2py.gluon.admin.plugin_install
        web2py.gluon.admin.plugin_pack
        web2py.gluon.admin.unzip
        web2py.gluon.admin.upgrade
      
    
+    web2py.gluon.cfs.getcfs
      
    
+    web2py.gluon.compileapp.build_environment
        web2py.gluon.compileapp.compile_application
        web2py.gluon.compileapp.compile_controllers
        web2py.gluon.compileapp.compile_models
        web2py.gluon.compileapp.compile_views
        web2py.gluon.compileapp.local_import_aux
        web2py.gluon.compileapp.read_pyc
        web2py.gluon.compileapp.remove_compiled_application
        web2py.gluon.compileapp.run_controller_in
        web2py.gluon.compileapp.run_models_in
        web2py.gluon.compileapp.run_view_in
        web2py.gluon.compileapp.save_pyc
        web2py.gluon.compileapp.test
      
    
+    web2py.gluon.contenttype.contenttype
      
    
+  
    
+    web2py.gluon.contrib.pymysql.Binary
      
    
+  
    
+    web2py.gluon.contrib.pymysql.Connect
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.convert_bit
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.convert_characters
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.convert_date
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.convert_datetime
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.convert_decimal
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.convert_float
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.convert_int
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.convert_long
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.convert_mysql_timestamp
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.convert_set
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.convert_time
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.convert_timedelta
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.escape_None
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.escape_bool
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.escape_date
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.escape_datetime
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.escape_decimal
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.escape_dict
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.escape_float
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.escape_item
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.escape_object
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.escape_sequence
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.escape_set
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.escape_string
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.escape_struct_time
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.escape_time
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.escape_timedelta
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.escape_unicode
      
    
+  
    
+    web2py.gluon.contrib.pymysql.get_client_info
      
    
+  
    
+    web2py.gluon.contrib.pymysql.install_as_MySQLdb
      
    
+  
    
+    web2py.gluon.contrib.pymysql.thread_safe
      
    
+  
    
+    web2py.gluon.contrib.pymysql.times.DateFromTicks
      
    
+  
    
+    web2py.gluon.contrib.pymysql.times.TimeFromTicks
      
    
+  
    
+    web2py.gluon.contrib.pymysql.times.TimestampFromTicks
      
    
+    web2py.gluon.custom_import.custom_import_install
        web2py.gluon.custom_import.is_tracking_changes
        web2py.gluon.custom_import.track_changes
      
    
+    web2py.gluon.dal.DEFAULT
      
    
+  
    
+    web2py.gluon.dal.Reference_pickler
      
    
+  
    
+    web2py.gluon.dal.Reference_unpickler
      
    
+  
    
+    web2py.gluon.dal.Row_pickler
      
    
+  
    
+    web2py.gluon.dal.Row_unpickler
      
    
+  
    
+    web2py.gluon.dal.Rows_pickler
      
    
+  
    
+    web2py.gluon.dal.Rows_unpickler
      
    
+  
    
+    web2py.gluon.dal.bar_decode_integer
      
    
+  
    
+    web2py.gluon.dal.bar_decode_string
      
    
+  
    
+    web2py.gluon.dal.bar_encode
      
    
+  
    
+    web2py.gluon.dal.bar_escape
      
    
+  
    
+    web2py.gluon.dal.cleanup
      
    
+  
    
+    web2py.gluon.dal.int2uuid
      
    
+  
    
+    web2py.gluon.dal.sqlhtml_validators
      
    
+  
    
+    web2py.gluon.dal.test_all
      
    
+  
    
+    web2py.gluon.dal.update_record
      
    
+  
    
+    web2py.gluon.dal.uuid2int
      
    
+  
    
+    web2py.gluon.dal.xorify
      
    
+    web2py.gluon.debug.communicate
        web2py.gluon.debug.set_trace
        web2py.gluon.debug.stop_trace
      
    
+    web2py.gluon.decoder.autoDetectXMLEncoding
      
    
+  
    
+    web2py.gluon.decoder.decoder
      
    
+  
    
+    web2py.gluon.fileutils._extractall
      
    
+  
    
+    web2py.gluon.fileutils.abspath
      
    
+  
    
+    web2py.gluon.fileutils.check_credentials
      
    
+  
    
+    web2py.gluon.fileutils.cleanpath
      
    
+  
    
+    web2py.gluon.fileutils.copystream
      
    
+  
    
+    web2py.gluon.fileutils.fix_newlines
      
    
+  
    
+    web2py.gluon.fileutils.get_session
      
    
+  
    
+    web2py.gluon.fileutils.listdir
      
    
+  
    
+    web2py.gluon.fileutils.make_fake_file_like_object
      
    
+  
    
+    web2py.gluon.fileutils.mktree
      
    
+  
    
+    web2py.gluon.fileutils.read_file
      
    
+  
    
+    web2py.gluon.fileutils.readlines_file
      
    
+  
    
+    web2py.gluon.fileutils.recursive_unlink
      
    
+  
    
+    web2py.gluon.fileutils.tar
      
    
+  
    
+    web2py.gluon.fileutils.tar_compiled
      
    
+  
    
+    web2py.gluon.fileutils.untar
      
    
+  
    
+    web2py.gluon.fileutils.up
      
    
+  
    
+    web2py.gluon.fileutils.w2p_pack
      
    
+  
    
+    web2py.gluon.fileutils.w2p_pack_plugin
      
    
+  
    
+    web2py.gluon.fileutils.w2p_unpack
      
    
+  
    
+    web2py.gluon.fileutils.w2p_unpack_plugin
      
    
+  
    
+    web2py.gluon.fileutils.write_file
      
    
+  
    
+    web2py.gluon.highlight.highlight
      
    
+  
    
+    web2py.gluon.html.TAG_pickler
      
    
+  
    
+    web2py.gluon.html.TAG_unpickler
      
    
+  
    
+    web2py.gluon.html.URL
      
    
+  
    
+    web2py.gluon.html.XML_pickle
      
    
+  
    
+    web2py.gluon.html.XML_unpickle
      
    
+  
    
+    web2py.gluon.html.embed64
      
    
+  
    
+    web2py.gluon.html.join
      
    
+  
    
+    web2py.gluon.html.markdown_serializer
      
    
+  
    
+    web2py.gluon.html.markmin_serializer
      
    
+  
    
+    web2py.gluon.html.test
      
    
+  
    
+    web2py.gluon.html.verifyURL
      
    
+  
    
+    web2py.gluon.html.xmlescape
      
    
+  
    
+    web2py.gluon.http.redirect
      
    
+  
    
+    web2py.gluon.languages.findT
      
    
+  
    
+    web2py.gluon.languages.lazyT_pickle
      
    
+  
    
+    web2py.gluon.languages.lazyT_unpickle
      
    
+  
    
+    web2py.gluon.languages.read_dict
      
    
+  
    
+    web2py.gluon.languages.read_dict_aux
      
    
+  
    
+    web2py.gluon.languages.update_all_languages
      
    
+  
    
+    web2py.gluon.languages.utf8_repr
      
    
+  
    
+    web2py.gluon.languages.write_dict
      
    
+    web2py.gluon.main.appfactory
      
    
+    web2py.gluon.main.copystream_progress
      
    
+  
    
+    web2py.gluon.main.environ_aux
      
    
+  
    
+    web2py.gluon.main.get_client
      
    
+  
    
+    web2py.gluon.main.middleware_aux
      
    
+  
    
+    web2py.gluon.main.parse_get_post_vars
      
    
+    web2py.gluon.main.save_password
      
    
+    web2py.gluon.main.serve_controller
      
    
+  
    
+    web2py.gluon.main.start_response_aux
      
    
+    web2py.gluon.main.wsgibase
        web2py.gluon.newcron.crondance
        web2py.gluon.newcron.parsecronline
        web2py.gluon.newcron.rangetolist
        web2py.gluon.newcron.stopcron
      
    
+    web2py.gluon.portalocker.lock
      
    
+  
    
+    web2py.gluon.portalocker.unlock
      
    
+    web2py.gluon.restricted.compile2
        web2py.gluon.restricted.restricted
      
    
+    web2py.gluon.restricted.snapshot
      
    
+  
    
+    web2py.gluon.rewrite._params_default
      
    
+  
    
+    web2py.gluon.rewrite._router_default
      
    
+  
    
+    web2py.gluon.rewrite.compile_regex
      
    
+  
    
+    web2py.gluon.rewrite.filter_err
      
    
+  
    
+    web2py.gluon.rewrite.filter_url
      
    
+  
    
+    web2py.gluon.rewrite.get_effective_router
      
    
+  
    
+    web2py.gluon.rewrite.load
      
    
+  
    
+    web2py.gluon.rewrite.load_routers
      
    
+  
    
+    web2py.gluon.rewrite.map_url_in
      
    
+  
    
+    web2py.gluon.rewrite.map_url_out
      
    
+  
    
+    web2py.gluon.rewrite.regex_filter_in
      
    
+  
    
+    web2py.gluon.rewrite.regex_filter_out
      
    
+  
    
+    web2py.gluon.rewrite.regex_select
      
    
+  
    
+    web2py.gluon.rewrite.regex_uri
      
    
+  
    
+    web2py.gluon.rewrite.regex_url_in
      
    
+  
    
+    web2py.gluon.rewrite.try_redirect_on_error
      
    
+  
    
+    web2py.gluon.rewrite.try_rewrite_on_error
      
    
+  
    
+    web2py.gluon.rewrite.url_in
      
    
+  
    
+    web2py.gluon.rewrite.url_out
      
    
+    web2py.gluon.rocket.CherryPyWSGIServer
      
    
+    web2py.gluon.rocket._formatparam
      
    
+    web2py.gluon.rocket.b
      
    
+    web2py.gluon.rocket.demo
      
    
+  
    
+    web2py.gluon.rocket.demo_app
      
    
+  
    
+    web2py.gluon.rocket.get_method
      
    
+    web2py.gluon.rocket.u
      
    
+    web2py.gluon.sanitizer.sanitize
      
    
+  
    
+    web2py.gluon.sanitizer.xssescape
      
    
+  
    
+    web2py.gluon.serializers.csv
      
    
+  
    
+    web2py.gluon.serializers.custom_json
      
    
+  
    
+    web2py.gluon.serializers.json
      
    
+  
    
+    web2py.gluon.serializers.rss
      
    
+  
    
+    web2py.gluon.serializers.xml
      
    
+  
    
+    web2py.gluon.serializers.xml_rec
      
    
+    web2py.gluon.shell.die
        web2py.gluon.shell.env
        web2py.gluon.shell.exec_environment
        web2py.gluon.shell.exec_pythonrc
        web2py.gluon.shell.execute_from_command_line
        web2py.gluon.shell.get_usage
        web2py.gluon.shell.parse_path_info
        web2py.gluon.shell.run
        web2py.gluon.shell.test
      
    
+    web2py.gluon.sqlhtml.represent
      
    
+  
    
+    web2py.gluon.sqlhtml.safe_float
      
    
+  
    
+    web2py.gluon.sqlhtml.safe_int
      
    
+  
    
+    web2py.gluon.storage.load_storage
      
    
+  
    
+    web2py.gluon.storage.save_storage
      
    
+  
    
+    web2py.gluon.streamer.stream_file_or_304_or_206
      
    
+  
    
+    web2py.gluon.streamer.streamer
      
    
+    web2py.gluon.template.get_parsed
        web2py.gluon.template.parse_template
        web2py.gluon.template.render
      
    
+    web2py.gluon.tools.DEFAULT
      
    
+  
    
+    web2py.gluon.tools.addrow
      
    
+  
    
+    web2py.gluon.tools.call_or_redirect
      
    
+  
    
+    web2py.gluon.tools.callback
      
    
+  
    
+    web2py.gluon.tools.completion
      
    
+    web2py.gluon.tools.fetch
        web2py.gluon.tools.geocode
        web2py.gluon.tools.prettydate
      
    
+    web2py.gluon.tools.test_thread_separation
      
    
+  
    
+    web2py.gluon.tools.universal_caller
      
    
+  
    
+    web2py.gluon.tools.validators
      
    
+  
    
+    web2py.gluon.utils.get_digest
      
    
+  
    
+    web2py.gluon.utils.hmac_hash
      
    
+  
    
+    web2py.gluon.utils.initialize_urandom
      
    
+  
    
+    web2py.gluon.utils.md5_hash
      
    
+  
    
+    web2py.gluon.utils.simple_hash
      
    
+  
    
+    web2py.gluon.utils.web2py_uuid
      
    
+  
    
+    web2py.gluon.validators.escape_unicode
      
    
+  
    
+    web2py.gluon.validators.is_empty
      
    
+  
    
+    web2py.gluon.validators.options_sorter
      
    
+  
    
+    web2py.gluon.validators.translate
      
    
+  
    
+    web2py.gluon.validators.unicode_to_ascii_authority
      
    
+  
    
+    web2py.gluon.validators.unicode_to_ascii_url
      
    
+  
    
+    web2py.gluon.validators.urlify
      
    
+    web2py.gluon.widget.console
        web2py.gluon.widget.presentation
        web2py.gluon.widget.start
        web2py.gluon.widget.start_browser
        web2py.gluon.widget.try_start_browser
        web2py.gluon.winservice.web2py_windows_service_handler
      
    
+    web2py.gluon.xmlrpc.handler
      
    
+  
    All Variables
    
+    psycopg2.BINARY
        psycopg2.DATETIME
        psycopg2.NUMBER
        psycopg2.ROWID
        psycopg2.STRING
        psycopg2.apilevel
        psycopg2.k
        psycopg2.paramstyle
        psycopg2.threadsafety
        psycopg2.tz.DSTDIFF
        psycopg2.tz.DSTOFFSET
        psycopg2.tz.LOCAL
        psycopg2.tz.STDOFFSET
        psycopg2.tz.ZERO
        sqlite3.dbapi2.PARSE_COLNAMES
        sqlite3.dbapi2.PARSE_DECLTYPES
        sqlite3.dbapi2.SQLITE_ALTER_TABLE
        sqlite3.dbapi2.SQLITE_ANALYZE
        sqlite3.dbapi2.SQLITE_ATTACH
        sqlite3.dbapi2.SQLITE_CREATE_INDEX
        sqlite3.dbapi2.SQLITE_CREATE_TABLE
        sqlite3.dbapi2.SQLITE_CREATE_TEMP_INDEX
        sqlite3.dbapi2.SQLITE_CREATE_TEMP_TABLE
        sqlite3.dbapi2.SQLITE_CREATE_TEMP_TRIGGER
        sqlite3.dbapi2.SQLITE_CREATE_TEMP_VIEW
        sqlite3.dbapi2.SQLITE_CREATE_TRIGGER
        sqlite3.dbapi2.SQLITE_CREATE_VIEW
        sqlite3.dbapi2.SQLITE_DELETE
        sqlite3.dbapi2.SQLITE_DENY
        sqlite3.dbapi2.SQLITE_DETACH
        sqlite3.dbapi2.SQLITE_DROP_INDEX
        sqlite3.dbapi2.SQLITE_DROP_TABLE
        sqlite3.dbapi2.SQLITE_DROP_TEMP_INDEX
        sqlite3.dbapi2.SQLITE_DROP_TEMP_TABLE
        sqlite3.dbapi2.SQLITE_DROP_TEMP_TRIGGER
        sqlite3.dbapi2.SQLITE_DROP_TEMP_VIEW
        sqlite3.dbapi2.SQLITE_DROP_TRIGGER
        sqlite3.dbapi2.SQLITE_DROP_VIEW
        sqlite3.dbapi2.SQLITE_IGNORE
        sqlite3.dbapi2.SQLITE_INSERT
        sqlite3.dbapi2.SQLITE_OK
        sqlite3.dbapi2.SQLITE_PRAGMA
        sqlite3.dbapi2.SQLITE_READ
        sqlite3.dbapi2.SQLITE_REINDEX
        sqlite3.dbapi2.SQLITE_SELECT
        sqlite3.dbapi2.SQLITE_TRANSACTION
        sqlite3.dbapi2.SQLITE_UPDATE
        sqlite3.dbapi2.adapters
        sqlite3.dbapi2.apilevel
        sqlite3.dbapi2.converters
        sqlite3.dbapi2.paramstyle
        sqlite3.dbapi2.sqlite_version
        sqlite3.dbapi2.sqlite_version_info
        sqlite3.dbapi2.threadsafety
        sqlite3.dbapi2.version
        sqlite3.dbapi2.version_info
        sqlite3.dbapi2.x
        web2py.gluon.ON
        web2py.gluon.TAG
      
    
+    web2py.gluon.cache.DEFAULT_TIME_EXPIRE
      
    
+  
    
+    web2py.gluon.cache.logger
      
    
+  
    
+    web2py.gluon.cfs.cfs
      
    
+  
    
+    web2py.gluon.cfs.cfs_lock
      
    
+    web2py.gluon.compileapp.TEST_CODE
        web2py.gluon.compileapp.is_gae
        web2py.gluon.compileapp.is_jython
        web2py.gluon.compileapp.logger
      
    
+    web2py.gluon.contenttype.CONTENT_TYPE
      
    
+  
    
+    web2py.gluon.contrib.pymysql.BINARY
      
    
+  
    
+    web2py.gluon.contrib.pymysql.DATE
      
    
+  
    
+    web2py.gluon.contrib.pymysql.DATETIME
      
    
+  
    
+    web2py.gluon.contrib.pymysql.NULL
      
    
+  
    
+    web2py.gluon.contrib.pymysql.NUMBER
      
    
+  
    
+    web2py.gluon.contrib.pymysql.ROWID
      
    
+  
    
+    web2py.gluon.contrib.pymysql.STRING
      
    
+  
    
+    web2py.gluon.contrib.pymysql.TIME
      
    
+  
    
+    web2py.gluon.contrib.pymysql.TIMESTAMP
      
    
+  
    
+    web2py.gluon.contrib.pymysql.VERSION
      
    
+  
    
+    web2py.gluon.contrib.pymysql.apilevel
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.BIT
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.BLOB
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.CHAR
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.DATE
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.DATETIME
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.DECIMAL
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.DOUBLE
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.ENUM
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.FLOAT
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.GEOMETRY
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.INT24
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.INTERVAL
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.LONG
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.LONGLONG
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.LONG_BLOB
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.MEDIUM_BLOB
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.NEWDATE
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.NEWDECIMAL
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.NULL
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.SET
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.SHORT
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.STRING
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.TIME
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.TIMESTAMP
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.TINY
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.TINY_BLOB
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.VARCHAR
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.VAR_STRING
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE.YEAR
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.ESCAPE_MAP
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.ESCAPE_REGEX
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.conversions
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.decoders
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters.encoders
      
    
+  
    
+    web2py.gluon.contrib.pymysql.paramstyle
      
    
+  
    
+    web2py.gluon.contrib.pymysql.threadsafety
      
    
+  
    
+    web2py.gluon.contrib.pymysql.version_info
      
    
+    web2py.gluon.current
      
    
+    web2py.gluon.custom_import._is_tracking_changes
      
    
+  
    
+    web2py.gluon.custom_import._web2py_date_tracker_importer
      
    
+  
    
+    web2py.gluon.custom_import._web2py_importer
      
    
+  
    
+    web2py.gluon.custom_import._web2py_path
      
    
+  
    
+    web2py.gluon.dal.ADAPTERS
      
    
+  
    
+    web2py.gluon.dal.CALLABLETYPES
      
    
+  
    
+    web2py.gluon.dal.INFINITY
      
    
+  
    
+    web2py.gluon.dal.INGRES_SEQNAME
      
    
+  
    
+    web2py.gluon.dal.MAXCHARLENGTH
      
    
+  
    
+    web2py.gluon.dal.drivers
      
    
+  
    
+    web2py.gluon.dal.have_portalocker
      
    
+  
    
+    web2py.gluon.dal.have_serializers
      
    
+  
    
+    web2py.gluon.dal.have_validators
      
    
+  
    
+    web2py.gluon.dal.is_jdbc
      
    
+  
    
+    web2py.gluon.dal.logger
      
    
+  
    
+    web2py.gluon.dal.regex_cleanup_fn
      
    
+  
    
+    web2py.gluon.dal.regex_content
      
    
+  
    
+    web2py.gluon.dal.regex_dbname
      
    
+  
    
+    web2py.gluon.dal.regex_python_keywords
      
    
+  
    
+    web2py.gluon.dal.regex_quotes
      
    
+  
    
+    web2py.gluon.dal.sql_locker
      
    
+  
    
+    web2py.gluon.dal.string_unpack
      
    
+  
    
+    web2py.gluon.dal.table_field
      
    
+  
    
+    web2py.gluon.dal.thread
      
    
+    web2py.gluon.debug.debugger
        web2py.gluon.debug.logger
        web2py.gluon.debug.pipe_in
        web2py.gluon.debug.pipe_out
      
    
+    web2py.gluon.decoder.autodetect_dict
      
    
+  
    
+    web2py.gluon.globals.current
      
    
+  
    
+    web2py.gluon.globals.regex_session_id
      
    
+  
    
+    web2py.gluon.html.ON
      
    
+  
    
+    web2py.gluon.html.TAG
      
    
+  
    
+    web2py.gluon.html.regex_crlf
      
    
+  
    
+    web2py.gluon.http.defined_status
      
    
+    web2py.gluon.import_all.alert_dependency
        web2py.gluon.import_all.base_modules
        web2py.gluon.import_all.candidate
        web2py.gluon.import_all.contributed_modules
        web2py.gluon.import_all.dirs
        web2py.gluon.import_all.files
        web2py.gluon.import_all.module
        web2py.gluon.import_all.name
        web2py.gluon.import_all.py26_deprecated
        web2py.gluon.import_all.py27_deprecated
        web2py.gluon.import_all.python_version
        web2py.gluon.import_all.root
      
    
+    web2py.gluon.languages.PY_STRING_LITERAL_RE
      
    
+  
    
+    web2py.gluon.languages.is_gae
      
    
+  
    
+    web2py.gluon.languages.regex_language
      
    
+  
    
+    web2py.gluon.languages.regex_translate
      
    
+  
    
+    web2py.gluon.main.logger
      
    
+  
    
+    web2py.gluon.main.logpath
      
    
+  
    
+    web2py.gluon.main.regex_client
      
    
+  
    
+    web2py.gluon.main.requests
      
    
+  
    
+    web2py.gluon.main.version_info
      
    
+  
    
+    web2py.gluon.main.web2py_path
      
    
+  
    
+    web2py.gluon.main.web2py_version
      
    
+  
    
+    web2py.gluon.myregex.regex_expose
      
    
+  
    
+    web2py.gluon.myregex.regex_extend
      
    
+  
    
+    web2py.gluon.myregex.regex_include
      
    
+  
    
+    web2py.gluon.myregex.regex_tables
      
    
+  
    
+    web2py.gluon.newcron._cron_stopping
      
    
+    web2py.gluon.newcron.logger
      
    
+    web2py.gluon.portalocker.LOCK_EX
      
    
+  
    
+    web2py.gluon.portalocker.LOCK_NB
      
    
+  
    
+    web2py.gluon.portalocker.LOCK_SH
      
    
+  
    
+    web2py.gluon.portalocker.__overlapped
      
    
+  
    
+    web2py.gluon.portalocker.logger
      
    
+  
    
+    web2py.gluon.portalocker.os_locking
      
    
+    web2py.gluon.reserved_sql_keywords.ADAPTERS
        web2py.gluon.reserved_sql_keywords.COMMON
        web2py.gluon.reserved_sql_keywords.DB2
        web2py.gluon.reserved_sql_keywords.FIREBIRD
        web2py.gluon.reserved_sql_keywords.FIREBIRD_NONRESERVED
        web2py.gluon.reserved_sql_keywords.INFORMIX
        web2py.gluon.reserved_sql_keywords.INGRES
        web2py.gluon.reserved_sql_keywords.JDBCPOSTGRESQL
        web2py.gluon.reserved_sql_keywords.JDBCSQLITE
        web2py.gluon.reserved_sql_keywords.MSSQL
        web2py.gluon.reserved_sql_keywords.MYSQL
        web2py.gluon.reserved_sql_keywords.ORACLE
        web2py.gluon.reserved_sql_keywords.POSTGRESQL
        web2py.gluon.reserved_sql_keywords.POSTGRESQL_NONRESERVED
        web2py.gluon.reserved_sql_keywords.SQLITE
        web2py.gluon.reserved_sql_keywords.__author__
      
    
+    web2py.gluon.restricted.logger
      
    
+  
    
+    web2py.gluon.rewrite.ROUTER_BASE_KEYS
      
    
+  
    
+    web2py.gluon.rewrite.ROUTER_KEYS
      
    
+  
    
+    web2py.gluon.rewrite.logger
      
    
+  
    
+    web2py.gluon.rewrite.params
      
    
+  
    
+    web2py.gluon.rewrite.params_apps
      
    
+  
    
+    web2py.gluon.rewrite.regex_anything
      
    
+  
    
+    web2py.gluon.rewrite.regex_args
      
    
+  
    
+    web2py.gluon.rewrite.regex_at
      
    
+  
    
+    web2py.gluon.rewrite.regex_space
      
    
+  
    
+    web2py.gluon.rewrite.regex_static
      
    
+  
    
+    web2py.gluon.rewrite.regex_url
      
    
+  
    
+    web2py.gluon.rewrite.routers
      
    
+  
    
+    web2py.gluon.rewrite.thread
      
    
+  
    
+    web2py.gluon.rocket.BASE_ENV
      
    
+    web2py.gluon.rocket.BUF_SIZE
        web2py.gluon.rocket.DEFAULTS
      
    
+    web2py.gluon.rocket.DEFAULT_LISTEN_QUEUE_SIZE
      
    
+  
    
+    web2py.gluon.rocket.DEFAULT_MAX_THREADS
      
    
+  
    
+    web2py.gluon.rocket.DEFAULT_MIN_THREADS
      
    
+  
    
+    web2py.gluon.rocket.HEADER_RESPONSE
      
    
+  
    
+    web2py.gluon.rocket.HTTP_METHODS
      
    
+    web2py.gluon.rocket.HTTP_SERVER_SOFTWARE
        web2py.gluon.rocket.IGNORE_ERRORS_ON_CLOSE
        web2py.gluon.rocket.IS_JYTHON
      
    
+    web2py.gluon.rocket.LOG_LINE
      
    
+  
    
+    web2py.gluon.rocket.NEWLINE
      
    
+    web2py.gluon.rocket.PY3K
      
    
+    web2py.gluon.rocket.RESPONSE
      
    
+    web2py.gluon.rocket.SERVER_NAME
        web2py.gluon.rocket.SERVER_SOFTWARE
      
    
+    web2py.gluon.rocket.SOCKET_TIMEOUT
      
    
+  
    
+    web2py.gluon.rocket.THREAD_STOP_CHECK_INTERVAL
      
    
+    web2py.gluon.rocket.VERSION
      
    
+    web2py.gluon.rocket._tspecials
      
    
+  
    
+    web2py.gluon.rocket.has_ssl
      
    
+  
    
+    web2py.gluon.rocket.log
      
    
+  
    
+    web2py.gluon.rocket.re_REQUEST_LINE
      
    
+  
    
+    web2py.gluon.rocket.re_SLASH
      
    
+  
    
+    web2py.gluon.settings.global_settings
      
    
+  
    
+    web2py.gluon.settings.settings
      
    
+    web2py.gluon.shell.logger
        web2py.gluon.sql.drivers
      
    
+    web2py.gluon.sqlhtml.table_field
      
    
+  
    
+    web2py.gluon.sqlhtml.widget_class
      
    
+  
    
+    web2py.gluon.streamer.DEFAULT_CHUNK_SIZE
      
    
+  
    
+    web2py.gluon.streamer.regex_start_range
      
    
+  
    
+    web2py.gluon.streamer.regex_stop_range
      
    
+  
    
+    web2py.gluon.tools.ON
      
    
+  
    
+    web2py.gluon.tools.TAG
      
    
+  
    
+    web2py.gluon.tools.current
      
    
+  
    
+    web2py.gluon.tools.logger
      
    
+  
    
+    web2py.gluon.tools.regex_geocode
      
    
+  
    
+    web2py.gluon.utils.ctokens
      
    
+  
    
+    web2py.gluon.utils.logger
      
    
+  
    
+    web2py.gluon.validators.all_url_schemes
      
    
+  
    
+    web2py.gluon.validators.http_schemes
      
    
+  
    
+    web2py.gluon.validators.label_split_regex
      
    
+  
    
+    web2py.gluon.validators.official_top_level_domains
      
    
+  
    
+    web2py.gluon.validators.official_url_schemes
      
    
+  
    
+    web2py.gluon.validators.regex1
      
    
+  
    
+    web2py.gluon.validators.regex2
      
    
+  
    
+    web2py.gluon.validators.regex_time
      
    
+  
    
+    web2py.gluon.validators.unofficial_url_schemes
      
    
+  
    
+    web2py.gluon.validators.url_split_regex
      
    
+    web2py.gluon.widget.ProgramAuthor
        web2py.gluon.widget.ProgramInfo
        web2py.gluon.widget.ProgramName
        web2py.gluon.widget.ProgramVersion
        web2py.gluon.widget.logger
        web2py.gluon.widget.msg
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-psycopg2-module.html
Index: applications/examples/static/epydoc/toc-psycopg2-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-psycopg2-module.html
@@ -0,0 +1,60 @@
+
+
+
+
+  psycopg2
+  
+  
+
+
+
+
    Module psycopg2
    
+
    
+  
    Classes
    
+    DataError
        DatabaseError
        Error
        IntegrityError
        InterfaceError
        InternalError
        NotSupportedError
        OperationalError
        ProgrammingError
        Warning
      
    Functions
    
+    Binary
        Date
        DateFromTicks
        Time
        TimeFromTicks
        Timestamp
        TimestampFromTicks
        connect
      
    Variables
    
+    BINARY
        DATETIME
        NUMBER
        ROWID
        STRING
        apilevel
        k
        paramstyle
        threadsafety
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-psycopg2.tz-module.html
Index: applications/examples/static/epydoc/toc-psycopg2.tz-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-psycopg2.tz-module.html
@@ -0,0 +1,39 @@
+
+
+
+
+  tz
+  
+  
+
+
+
+
    Module tz
    
+
    
+  
    Classes
    
+    FixedOffsetTimezone
        LocalTimezone
      
    Variables
    
+    DSTDIFF
        DSTOFFSET
        LOCAL
        STDOFFSET
        ZERO
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-sqlite3.dbapi2-module.html
Index: applications/examples/static/epydoc/toc-sqlite3.dbapi2-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-sqlite3.dbapi2-module.html
@@ -0,0 +1,78 @@
+
+
+
+
+  dbapi2
+  
+  
+
+
+
+
    Module dbapi2
    
+
    
+  
    Functions
    
+    DateFromTicks
        TimeFromTicks
        TimestampFromTicks
      
    Variables
    
+    PARSE_COLNAMES
        PARSE_DECLTYPES
        SQLITE_ALTER_TABLE
        SQLITE_ANALYZE
        SQLITE_ATTACH
        SQLITE_CREATE_INDEX
        SQLITE_CREATE_TABLE
        SQLITE_CREATE_TEMP_INDEX
        SQLITE_CREATE_TEMP_TABLE
        SQLITE_CREATE_TEMP_TRIGGER
        SQLITE_CREATE_TEMP_VIEW
        SQLITE_CREATE_TRIGGER
        SQLITE_CREATE_VIEW
        SQLITE_DELETE
        SQLITE_DENY
        SQLITE_DETACH
        SQLITE_DROP_INDEX
        SQLITE_DROP_TABLE
        SQLITE_DROP_TEMP_INDEX
        SQLITE_DROP_TEMP_TABLE
        SQLITE_DROP_TEMP_TRIGGER
        SQLITE_DROP_TEMP_VIEW
        SQLITE_DROP_TRIGGER
        SQLITE_DROP_VIEW
        SQLITE_IGNORE
        SQLITE_INSERT
        SQLITE_OK
        SQLITE_PRAGMA
        SQLITE_READ
        SQLITE_REINDEX
        SQLITE_SELECT
        SQLITE_TRANSACTION
        SQLITE_UPDATE
        adapters
        apilevel
        converters
        paramstyle
        sqlite_version
        sqlite_version_info
        threadsafety
        version
        version_info
        x
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon-module.html
@@ -0,0 +1,131 @@
+
+
+
+
+  gluon
+  
+  
+
+
+
+
    Module gluon
    
+
    
+  
    Classes
    
+    A
        B
        BEAUTIFY
        BODY
        BR
        CAT
        CENTER
        CLEANUP
        CODE
        CRYPT
        DAL
        DIV
        EM
        EMBED
        FIELDSET
        FORM
        Field
        H1
        H2
        H3
        H4
        H5
        H6
        HEAD
        HR
        HTML
        HTTP
        I
        IFRAME
        IMG
        INPUT
        IS_ALPHANUMERIC
        IS_DATE
        IS_DATETIME
        IS_DATETIME_IN_RANGE
        IS_DATE_IN_RANGE
        IS_DECIMAL_IN_RANGE
        IS_EMAIL
        IS_EMPTY_OR
        IS_EQUAL_TO
        IS_EXPR
        IS_FLOAT_IN_RANGE
        IS_IMAGE
        IS_INT_IN_RANGE
        IS_IN_DB
        IS_IN_SET
        IS_IPV4
        IS_LENGTH
        IS_LIST_OF
        IS_LOWER
        IS_MATCH
        IS_NOT_EMPTY
        IS_NOT_IN_DB
        IS_NULL_OR
        IS_SLUG
        IS_STRONG
        IS_TIME
        IS_UPLOAD_FILENAME
        IS_UPPER
        IS_URL
        LABEL
        LEGEND
        LI
        LINK
        MARKMIN
        MENU
        META
        OBJECT
        OL
        OPTGROUP
        OPTION
        P
        PRE
        SCRIPT
        SELECT
        SPAN
        SQLFORM
        SQLTABLE
        STYLE
        TABLE
        TBODY
        TD
        TEXTAREA
        TFOOT
        TH
        THEAD
        TITLE
        TR
        TT
        UL
        XHTML
        XML
      
    Functions
    
+    URL
        embed64
        redirect
      
    Variables
    
+    ON
        TAG
        current
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.admin-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.admin-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.admin-module.html
@@ -0,0 +1,47 @@
+
+
+
+
+  admin
+  
+  
+
+
+
+
    Module admin
    
+
    
+  
    Functions
    
+    add_path_first
        apath
        app_cleanup
        app_compile
        app_create
        app_install
        app_pack
        app_pack_compiled
        app_uninstall
        check_new_version
        create_missing_app_folders
        create_missing_folders
        plugin_install
        plugin_pack
        unzip
        upgrade
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.cfs-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.cfs-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.cfs-module.html
@@ -0,0 +1,41 @@
+
+
+
+
+  cfs
+  
+  
+
+
+
+
    Module cfs
    
+
    
+  
    Functions
    
+  
    
+    getcfs
      
    
+  
    Variables
    
+  
    
+    cfs
      
    
+  
    
+    cfs_lock
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.compileapp-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.compileapp-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.compileapp-module.html
@@ -0,0 +1,52 @@
+
+
+
+
+  compileapp
+  
+  
+
+
+
+
    Module compileapp
    
+
    
+  
    Classes
    
+    LoadFactory
        mybuiltin
      
    Functions
    
+    build_environment
        compile_application
        compile_controllers
        compile_models
        compile_views
        local_import_aux
        read_pyc
        remove_compiled_application
        run_controller_in
        run_models_in
        run_view_in
        save_pyc
        test
      
    Variables
    
+    TEST_CODE
        is_gae
        is_jython
        logger
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.contenttype-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.contenttype-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.contenttype-module.html
@@ -0,0 +1,38 @@
+
+
+
+
+  contenttype
+  
+  
+
+
+
+
    Module contenttype
    
+
    
+  
    Functions
    
+  
    
+    contenttype
      
    
+  
    Variables
    
+  
    
+    CONTENT_TYPE
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.contrib.pymysql-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.contrib.pymysql-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.contrib.pymysql-module.html
@@ -0,0 +1,156 @@
+
+
+
+
+  pymysql
+  
+  
+
+
+
+
    Module pymysql
    
+
    
+  
    Classes
    
+  
    
+    DBAPISet
      
    
+  
    
+    DataError
      
    
+  
    
+    DatabaseError
      
    
+  
    
+    Date
      
    
+  
    
+    Error
      
    
+  
    
+    IntegrityError
      
    
+  
    
+    InterfaceError
      
    
+  
    
+    InternalError
      
    
+  
    
+    NotSupportedError
      
    
+  
    
+    OperationalError
      
    
+  
    
+    ProgrammingError
      
    
+  
    
+    Time
      
    
+  
    
+    Timestamp
      
    
+  
    
+    Warning
      
    
+  
    Functions
    
+  
    
+    Binary
      
    
+  
    
+    Connect
      
    
+  
    
+    Connection
      
    
+  
    
+    DateFromTicks
      
    
+  
    
+    TimeFromTicks
      
    
+  
    
+    TimestampFromTicks
      
    
+  
    
+    connect
      
    
+  
    
+    escape_dict
      
    
+  
    
+    escape_sequence
      
    
+  
    
+    escape_string
      
    
+  
    
+    get_client_info
      
    
+  
    
+    install_as_MySQLdb
      
    
+  
    
+    thread_safe
      
    
+  
    Variables
    
+  
    
+    BINARY
      
    
+  
    
+    DATE
      
    
+  
    
+    DATETIME
      
    
+  
    
+    NULL
      
    
+  
    
+    NUMBER
      
    
+  
    
+    ROWID
      
    
+  
    
+    STRING
      
    
+  
    
+    TIME
      
    
+  
    
+    TIMESTAMP
      
    
+  
    
+    VERSION
      
    
+  
    
+    apilevel
      
    
+  
    
+    paramstyle
      
    
+  
    
+    threadsafety
      
    
+  
    
+    version_info
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.contrib.pymysql.constants-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.contrib.pymysql.constants-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.contrib.pymysql.constants-module.html
@@ -0,0 +1,30 @@
+
+
+
+
+  constants
+  
+  
+
+
+
+
    Module constants
    
+
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html
@@ -0,0 +1,118 @@
+
+
+
+
+  FIELD_TYPE
+  
+  
+
+
+
+
    Module FIELD_TYPE
    
+
    
+  
    Variables
    
+  
    
+    BIT
      
    
+  
    
+    BLOB
      
    
+  
    
+    CHAR
      
    
+  
    
+    DATE
      
    
+  
    
+    DATETIME
      
    
+  
    
+    DECIMAL
      
    
+  
    
+    DOUBLE
      
    
+  
    
+    ENUM
      
    
+  
    
+    FLOAT
      
    
+  
    
+    GEOMETRY
      
    
+  
    
+    INT24
      
    
+  
    
+    INTERVAL
      
    
+  
    
+    LONG
      
    
+  
    
+    LONGLONG
      
    
+  
    
+    LONG_BLOB
      
    
+  
    
+    MEDIUM_BLOB
      
    
+  
    
+    NEWDATE
      
    
+  
    
+    NEWDECIMAL
      
    
+  
    
+    NULL
      
    
+  
    
+    SET
      
    
+  
    
+    SHORT
      
    
+  
    
+    STRING
      
    
+  
    
+    TIME
      
    
+  
    
+    TIMESTAMP
      
    
+  
    
+    TINY
      
    
+  
    
+    TINY_BLOB
      
    
+  
    
+    VARCHAR
      
    
+  
    
+    VAR_STRING
      
    
+  
    
+    YEAR
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.contrib.pymysql.converters-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.contrib.pymysql.converters-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.contrib.pymysql.converters-module.html
@@ -0,0 +1,137 @@
+
+
+
+
+  converters
+  
+  
+
+
+
+
    Module converters
    
+
    
+  
    Functions
    
+  
    
+    convert_bit
      
    
+  
    
+    convert_characters
      
    
+  
    
+    convert_date
      
    
+  
    
+    convert_datetime
      
    
+  
    
+    convert_decimal
      
    
+  
    
+    convert_float
      
    
+  
    
+    convert_int
      
    
+  
    
+    convert_long
      
    
+  
    
+    convert_mysql_timestamp
      
    
+  
    
+    convert_set
      
    
+  
    
+    convert_time
      
    
+  
    
+    convert_timedelta
      
    
+  
    
+    escape_None
      
    
+  
    
+    escape_bool
      
    
+  
    
+    escape_date
      
    
+  
    
+    escape_datetime
      
    
+  
    
+    escape_decimal
      
    
+  
    
+    escape_dict
      
    
+  
    
+    escape_float
      
    
+  
    
+    escape_int
      
    
+  
    
+    escape_item
      
    
+  
    
+    escape_long
      
    
+  
    
+    escape_object
      
    
+  
    
+    escape_sequence
      
    
+  
    
+    escape_set
      
    
+  
    
+    escape_string
      
    
+  
    
+    escape_struct_time
      
    
+  
    
+    escape_time
      
    
+  
    
+    escape_timedelta
      
    
+  
    
+    escape_unicode
      
    
+  
    Variables
    
+  
    
+    ESCAPE_MAP
      
    
+  
    
+    ESCAPE_REGEX
      
    
+  
    
+    conversions
      
    
+  
    
+    decoders
      
    
+  
    
+    encoders
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.custom_import-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.custom_import-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.custom_import-module.html
@@ -0,0 +1,60 @@
+
+
+
+
+  custom_import
+  
+  
+
+
+
+
    Module custom_import
    
+
    
+  
    Classes
    
+  
    
+    _BaseImporter
      
    
+  
    
+    _DateTrackerImporter
      
    
+  
    
+    _Web2pyDateTrackerImporter
      
    
+  
    
+    _Web2pyImporter
      
    
+  
    Functions
    
+    custom_import_install
        is_tracking_changes
        track_changes
      
    Variables
    
+  
    
+    _is_tracking_changes
      
    
+  
    
+    _web2py_date_tracker_importer
      
    
+  
    
+    _web2py_importer
      
    
+  
    
+    _web2py_path
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.dal-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.dal-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.dal-module.html
@@ -0,0 +1,294 @@
+
+
+
+
+  dal
+  
+  
+
+
+
+
    Module dal
    
+
    
+  
    Classes
    
+  
    
+    BaseAdapter
      
    
+  
    
+    ConnectionPool
      
    
+  
    
+    CouchDBAdapter
      
    
+  
    
+    CubridAdapter
      
    
+  
    
+    DAL
      
    
+  
    
+    DB2Adapter
      
    
+  
    
+    DatabaseStoredFile
      
    
+  
    
+    Expression
      
    
+  
    
+    Field
      
    
+  
    
+    FireBirdAdapter
      
    
+  
    
+    FireBirdEmbeddedAdapter
      
    
+  
    
+    GAEDecimalProperty
      
    
+  
    
+    GAEF
      
    
+  
    
+    GQLDB
      
    
+  
    
+    GoogleDatastoreAdapter
      
    
+  
    
+    GoogleSQLAdapter
      
    
+  
    
+    InformixAdapter
      
    
+  
    
+    IngresAdapter
      
    
+  
    
+    IngresUnicodeAdapter
      
    
+  
    
+    JDBCPostgreSQLAdapter
      
    
+  
    
+    JDBCSQLiteAdapter
      
    
+  
    
+    MSSQL2Adapter
      
    
+  
    
+    MSSQLAdapter
      
    
+  
    
+    MongoDBAdapter
      
    
+  
    
+    MySQLAdapter
      
    
+  
    
+    NoSQLAdapter
      
    
+  
    
+    OracleAdapter
      
    
+  
    
+    PostgreSQLAdapter
      
    
+  
    
+    Query
      
    
+  
    
+    Reference
      
    
+  
    
+    Row
      
    
+  
    
+    Rows
      
    
+  
    
+    SAPDBAdapter
      
    
+  
    
+    SQLALL
      
    
+  
    
+    SQLCallableList
      
    
+  
    
+    SQLCustomType
      
    
+  
    
+    SQLDB
      
    
+  
    
+    SQLField
      
    
+  
    
+    SQLQuery
      
    
+  
    
+    SQLRows
      
    
+  
    
+    SQLSet
      
    
+  
    
+    SQLStorage
      
    
+  
    
+    SQLTable
      
    
+  
    
+    SQLXorable
      
    
+  
    
+    SQLiteAdapter
      
    
+  
    
+    Set
      
    
+  
    
+    Table
      
    
+  
    
+    TeradataAdapter
      
    
+  
    
+    UseDatabaseStoredFile
      
    
+  
    Functions
    
+  
    
+    DEFAULT
      
    
+  
    
+    Reference_pickler
      
    
+  
    
+    Reference_unpickler
      
    
+  
    
+    Row_pickler
      
    
+  
    
+    Row_unpickler
      
    
+  
    
+    Rows_pickler
      
    
+  
    
+    Rows_unpickler
      
    
+  
    
+    bar_decode_integer
      
    
+  
    
+    bar_decode_string
      
    
+  
    
+    bar_encode
      
    
+  
    
+    bar_escape
      
    
+  
    
+    cleanup
      
    
+  
    
+    int2uuid
      
    
+  
    
+    sqlhtml_validators
      
    
+  
    
+    test_all
      
    
+  
    
+    update_record
      
    
+  
    
+    uuid2int
      
    
+  
    
+    xorify
      
    
+  
    Variables
    
+  
    
+    ADAPTERS
      
    
+  
    
+    CALLABLETYPES
      
    
+  
    
+    INFINITY
      
    
+  
    
+    INGRES_SEQNAME
      
    
+  
    
+    MAXCHARLENGTH
      
    
+  
    
+    drivers
      
    
+  
    
+    have_portalocker
      
    
+  
    
+    have_serializers
      
    
+  
    
+    have_validators
      
    
+  
    
+    is_jdbc
      
    
+  
    
+    logger
      
    
+  
    
+    regex_cleanup_fn
      
    
+  
    
+    regex_content
      
    
+  
    
+    regex_dbname
      
    
+  
    
+    regex_python_keywords
      
    
+  
    
+    regex_quotes
      
    
+  
    
+    sql_locker
      
    
+  
    
+    string_unpack
      
    
+  
    
+    table_field
      
    
+  
    
+    thread
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.debug-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.debug-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.debug-module.html
@@ -0,0 +1,41 @@
+
+
+
+
+  debug
+  
+  
+
+
+
+
    Module debug
    
+
    
+  
    Classes
    
+    Pipe
      
    Functions
    
+    communicate
        set_trace
        stop_trace
      
    Variables
    
+    debugger
        logger
        pipe_in
        pipe_out
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.decoder-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.decoder-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.decoder-module.html
@@ -0,0 +1,41 @@
+
+
+
+
+  decoder
+  
+  
+
+
+
+
    Module decoder
    
+
    
+  
    Functions
    
+  
    
+    autoDetectXMLEncoding
      
    
+  
    
+    decoder
      
    
+  
    Variables
    
+  
    
+    autodetect_dict
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.fileutils-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.fileutils-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.fileutils-module.html
@@ -0,0 +1,97 @@
+
+
+
+
+  fileutils
+  
+  
+
+
+
+
    Module fileutils
    
+
    
+  
    Functions
    
+  
    
+    _extractall
      
    
+  
    
+    abspath
      
    
+  
    
+    check_credentials
      
    
+  
    
+    cleanpath
      
    
+  
    
+    copystream
      
    
+  
    
+    fix_newlines
      
    
+  
    
+    get_session
      
    
+  
    
+    listdir
      
    
+  
    
+    make_fake_file_like_object
      
    
+  
    
+    mktree
      
    
+  
    
+    read_file
      
    
+  
    
+    readlines_file
      
    
+  
    
+    recursive_unlink
      
    
+  
    
+    tar
      
    
+  
    
+    tar_compiled
      
    
+  
    
+    untar
      
    
+  
    
+    up
      
    
+  
    
+    w2p_pack
      
    
+  
    
+    w2p_pack_plugin
      
    
+  
    
+    w2p_unpack
      
    
+  
    
+    w2p_unpack_plugin
      
    
+  
    
+    write_file
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.globals-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.globals-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.globals-module.html
@@ -0,0 +1,47 @@
+
+
+
+
+  globals
+  
+  
+
+
+
+
    Module globals
    
+
    
+  
    Classes
    
+  
    
+    Request
      
    
+  
    
+    Response
      
    
+  
    
+    Session
      
    
+  
    Variables
    
+  
    
+    current
      
    
+  
    
+    regex_session_id
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.highlight-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.highlight-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.highlight-module.html
@@ -0,0 +1,38 @@
+
+
+
+
+  highlight
+  
+  
+
+
+
+
    Module highlight
    
+
    
+  
    Classes
    
+  
    
+    Highlighter
      
    
+  
    Functions
    
+  
    
+    highlight
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.html-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.html-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.html-module.html
@@ -0,0 +1,264 @@
+
+
+
+
+  html
+  
+  
+
+
+
+
    Module html
    
+
    
+  
    Classes
    
+  
    
+    A
      
    
+  
    
+    B
      
    
+  
    
+    BEAUTIFY
      
    
+  
    
+    BODY
      
    
+  
    
+    BR
      
    
+  
    
+    BUTTON
      
    
+  
    
+    CAT
      
    
+  
    
+    CENTER
      
    
+  
    
+    CODE
      
    
+  
    
+    COL
      
    
+  
    
+    COLGROUP
      
    
+  
    
+    DIV
      
    
+  
    
+    EM
      
    
+  
    
+    EMBED
      
    
+  
    
+    FIELDSET
      
    
+  
    
+    FORM
      
    
+  
    
+    H1
      
    
+  
    
+    H2
      
    
+  
    
+    H3
      
    
+  
    
+    H4
      
    
+  
    
+    H5
      
    
+  
    
+    H6
      
    
+  
    
+    HEAD
      
    
+  
    
+    HR
      
    
+  
    
+    HTML
      
    
+  
    
+    I
      
    
+  
    
+    IFRAME
      
    
+  
    
+    IMG
      
    
+  
    
+    INPUT
      
    
+  
    
+    LABEL
      
    
+  
    
+    LEGEND
      
    
+  
    
+    LI
      
    
+  
    
+    LINK
      
    
+  
    
+    MARKMIN
      
    
+  
    
+    MENU
      
    
+  
    
+    META
      
    
+  
    
+    OBJECT
      
    
+  
    
+    OL
      
    
+  
    
+    OPTGROUP
      
    
+  
    
+    OPTION
      
    
+  
    
+    P
      
    
+  
    
+    PRE
      
    
+  
    
+    SCRIPT
      
    
+  
    
+    SELECT
      
    
+  
    
+    SPAN
      
    
+  
    
+    STYLE
      
    
+  
    
+    TABLE
      
    
+  
    
+    TBODY
      
    
+  
    
+    TD
      
    
+  
    
+    TEXTAREA
      
    
+  
    
+    TFOOT
      
    
+  
    
+    TH
      
    
+  
    
+    THEAD
      
    
+  
    
+    TITLE
      
    
+  
    
+    TR
      
    
+  
    
+    TT
      
    
+  
    
+    UL
      
    
+  
    
+    XHTML
      
    
+  
    
+    XML
      
    
+  
    
+    XmlComponent
      
    
+  
    
+    __TAG__
      
    
+  
    
+    web2pyHTMLParser
      
    
+  
    Functions
    
+  
    
+    TAG_pickler
      
    
+  
    
+    TAG_unpickler
      
    
+  
    
+    URL
      
    
+  
    
+    XML_pickle
      
    
+  
    
+    XML_unpickle
      
    
+  
    
+    embed64
      
    
+  
    
+    join
      
    
+  
    
+    markdown_serializer
      
    
+  
    
+    markmin_serializer
      
    
+  
    
+    test
      
    
+  
    
+    verifyURL
      
    
+  
    
+    xmlescape
      
    
+  
    Variables
    
+  
    
+    ON
      
    
+  
    
+    TAG
      
    
+  
    
+    regex_crlf
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.http-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.http-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.http-module.html
@@ -0,0 +1,45 @@
+
+
+
+
+  http
+  
+  
+
+
+
+
    Module http
    
+
    
+  
    Classes
    
+  
    
+    BaseException
      
    
+  
    
+    HTTP
      
    
+  
    Functions
    
+  
    
+    redirect
      
    
+  
    Variables
    
+  
    
+    defined_status
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.import_all-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.import_all-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.import_all-module.html
@@ -0,0 +1,43 @@
+
+
+
+
+  import_all
+  
+  
+
+
+
+
    Module import_all
    
+
    
+  
    Variables
    
+    alert_dependency
        base_modules
        candidate
        contributed_modules
        dirs
        files
        module
        name
        py26_deprecated
        py27_deprecated
        python_version
        root
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.languages-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.languages-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.languages-module.html
@@ -0,0 +1,75 @@
+
+
+
+
+  languages
+  
+  
+
+
+
+
    Module languages
    
+
    
+  
    Classes
    
+  
    
+    lazyT
      
    
+  
    
+    translator
      
    
+  
    Functions
    
+  
    
+    findT
      
    
+  
    
+    lazyT_pickle
      
    
+  
    
+    lazyT_unpickle
      
    
+  
    
+    read_dict
      
    
+  
    
+    read_dict_aux
      
    
+  
    
+    update_all_languages
      
    
+  
    
+    utf8_repr
      
    
+  
    
+    write_dict
      
    
+  
    Variables
    
+  
    
+    PY_STRING_LITERAL_RE
      
    
+  
    
+    is_gae
      
    
+  
    
+    regex_language
      
    
+  
    
+    regex_translate
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.main-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.main-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.main-module.html
@@ -0,0 +1,79 @@
+
+
+
+
+  main
+  
+  
+
+
+
+
    Module main
    
+
    
+  
    Classes
    
+    HttpServer
      
    Functions
    
+    appfactory
      
    
+    copystream_progress
      
    
+  
    
+    environ_aux
      
    
+  
    
+    get_client
      
    
+  
    
+    middleware_aux
      
    
+  
    
+    parse_get_post_vars
      
    
+    save_password
      
    
+    serve_controller
      
    
+  
    
+    start_response_aux
      
    
+    wsgibase
      
    Variables
    
+  
    
+    logger
      
    
+  
    
+    logpath
      
    
+  
    
+    regex_client
      
    
+  
    
+    requests
      
    
+  
    
+    version_info
      
    
+  
    
+    web2py_path
      
    
+  
    
+    web2py_version
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.myregex-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.myregex-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.myregex-module.html
@@ -0,0 +1,43 @@
+
+
+
+
+  myregex
+  
+  
+
+
+
+
    Module myregex
    
+
    
+  
    Variables
    
+  
    
+    regex_expose
      
    
+  
    
+    regex_extend
      
    
+  
    
+    regex_include
      
    
+  
    
+    regex_tables
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.newcron-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.newcron-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.newcron-module.html
@@ -0,0 +1,46 @@
+
+
+
+
+  newcron
+  
+  
+
+
+
+
    Module newcron
    
+
    
+  
    Classes
    
+    Token
        cronlauncher
        extcron
        hardcron
        softcron
      
    Functions
    
+    crondance
        parsecronline
        rangetolist
        stopcron
      
    Variables
    
+  
    
+    _cron_stopping
      
    
+    logger
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.portalocker-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.portalocker-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.portalocker-module.html
@@ -0,0 +1,56 @@
+
+
+
+
+  portalocker
+  
+  
+
+
+
+
    Module portalocker
    
+
    
+  
    Functions
    
+  
    
+    lock
      
    
+  
    
+    unlock
      
    
+  
    Variables
    
+  
    
+    LOCK_EX
      
    
+  
    
+    LOCK_NB
      
    
+  
    
+    LOCK_SH
      
    
+  
    
+    __overlapped
      
    
+  
    
+    logger
      
    
+  
    
+    os_locking
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.reserved_sql_keywords-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.reserved_sql_keywords-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.reserved_sql_keywords-module.html
@@ -0,0 +1,47 @@
+
+
+
+
+  reserved_sql_keywords
+  
+  
+
+
+
+
    Module reserved_sql_keywords
    
+
    
+  
    Variables
    
+    ADAPTERS
        COMMON
        DB2
        FIREBIRD
        FIREBIRD_NONRESERVED
        INFORMIX
        INGRES
        JDBCPOSTGRESQL
        JDBCSQLITE
        MSSQL
        MYSQL
        ORACLE
        POSTGRESQL
        POSTGRESQL_NONRESERVED
        SQLITE
        __author__
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.restricted-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.restricted-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.restricted-module.html
@@ -0,0 +1,43 @@
+
+
+
+
+  restricted
+  
+  
+
+
+
+
    Module restricted
    
+
    
+  
    Classes
    
+    RestrictedError
        TicketStorage
      
    Functions
    
+    compile2
        restricted
      
    
+    snapshot
      
    
+  
    Variables
    
+  
    
+    logger
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.rewrite-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.rewrite-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.rewrite-module.html
@@ -0,0 +1,135 @@
+
+
+
+
+  rewrite
+  
+  
+
+
+
+
    Module rewrite
    
+
    
+  
    Classes
    
+  
    
+    MapUrlIn
      
    
+  
    
+    MapUrlOut
      
    
+  
    Functions
    
+  
    
+    _params_default
      
    
+  
    
+    _router_default
      
    
+  
    
+    compile_regex
      
    
+  
    
+    filter_err
      
    
+  
    
+    filter_url
      
    
+  
    
+    get_effective_router
      
    
+  
    
+    load
      
    
+  
    
+    load_routers
      
    
+  
    
+    map_url_in
      
    
+  
    
+    map_url_out
      
    
+  
    
+    regex_filter_in
      
    
+  
    
+    regex_filter_out
      
    
+  
    
+    regex_select
      
    
+  
    
+    regex_uri
      
    
+  
    
+    regex_url_in
      
    
+  
    
+    try_redirect_on_error
      
    
+  
    
+    try_rewrite_on_error
      
    
+  
    
+    url_in
      
    
+  
    
+    url_out
      
    
+  
    Variables
    
+  
    
+    ROUTER_BASE_KEYS
      
    
+  
    
+    ROUTER_KEYS
      
    
+  
    
+    logger
      
    
+  
    
+    params
      
    
+  
    
+    params_apps
      
    
+  
    
+    regex_anything
      
    
+  
    
+    regex_args
      
    
+  
    
+    regex_at
      
    
+  
    
+    regex_space
      
    
+  
    
+    regex_static
      
    
+  
    
+    regex_url
      
    
+  
    
+    routers
      
    
+  
    
+    thread
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.rocket-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.rocket-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.rocket-module.html
@@ -0,0 +1,146 @@
+
+
+
+
+  rocket
+  
+  
+
+
+
+
    Module rocket
    
+
    
+  
    Classes
    
+  
    
+    BadRequest
      
    
+  
    
+    ChunkedReader
      
    
+  
    
+    Connection
      
    
+  
    
+    FileWrapper
      
    
+  
    
+    Headers
      
    
+  
    
+    Listener
      
    
+  
    
+    Monitor
      
    
+    NullHandler
        Rocket
      
    
+    SSLError
      
    
+  
    
+    SocketClosed
      
    
+  
    
+    SocketTimeout
      
    
+  
    
+    ThreadPool
      
    
+  
    
+    WSGIWorker
      
    
+  
    
+    Worker
      
    
+  
    Functions
    
+    CherryPyWSGIServer
      
    
+    _formatparam
      
    
+    b
      
    
+    demo
      
    
+  
    
+    demo_app
      
    
+  
    
+    get_method
      
    
+    u
      
    Variables
    
+  
    
+    BASE_ENV
      
    
+    BUF_SIZE
        DEFAULTS
      
    
+    DEFAULT_LISTEN_QUEUE_SIZE
      
    
+  
    
+    DEFAULT_MAX_THREADS
      
    
+  
    
+    DEFAULT_MIN_THREADS
      
    
+  
    
+    HEADER_RESPONSE
      
    
+  
    
+    HTTP_METHODS
      
    
+    HTTP_SERVER_SOFTWARE
        IGNORE_ERRORS_ON_CLOSE
        IS_JYTHON
      
    
+    LOG_LINE
      
    
+  
    
+    NEWLINE
      
    
+    PY3K
      
    
+    RESPONSE
      
    
+    SERVER_NAME
        SERVER_SOFTWARE
      
    
+    SOCKET_TIMEOUT
      
    
+  
    
+    THREAD_STOP_CHECK_INTERVAL
      
    
+    VERSION
      
    
+    _tspecials
      
    
+  
    
+    has_ssl
      
    
+  
    
+    log
      
    
+  
    
+    re_REQUEST_LINE
      
    
+  
    
+    re_SLASH
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.sanitizer-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.sanitizer-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.sanitizer-module.html
@@ -0,0 +1,41 @@
+
+
+
+
+  sanitizer
+  
+  
+
+
+
+
    Module sanitizer
    
+
    
+  
    Classes
    
+  
    
+    XssCleaner
      
    
+  
    Functions
    
+  
    
+    sanitize
      
    
+  
    
+    xssescape
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.serializers-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.serializers-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.serializers-module.html
@@ -0,0 +1,49 @@
+
+
+
+
+  serializers
+  
+  
+
+
+
+
    Module serializers
    
+
    
+  
    Functions
    
+  
    
+    csv
      
    
+  
    
+    custom_json
      
    
+  
    
+    json
      
    
+  
    
+    rss
      
    
+  
    
+    xml
      
    
+  
    
+    xml_rec
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.settings-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.settings-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.settings-module.html
@@ -0,0 +1,37 @@
+
+
+
+
+  settings
+  
+  
+
+
+
+
    Module settings
    
+
    
+  
    Variables
    
+  
    
+    global_settings
      
    
+  
    
+    settings
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.shell-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.shell-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.shell-module.html
@@ -0,0 +1,42 @@
+
+
+
+
+  shell
+  
+  
+
+
+
+
    Module shell
    
+
    
+  
    Functions
    
+    die
        env
        exec_environment
        exec_pythonrc
        execute_from_command_line
        get_usage
        parse_path_info
        run
        test
      
    Variables
    
+    logger
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.sql-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.sql-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.sql-module.html
@@ -0,0 +1,35 @@
+
+
+
+
+  sql
+  
+  
+
+
+
+
    Module sql
    
+
    
+  
    Classes
    
+    DAL
        Field
      
    Variables
    
+    drivers
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.sqlhtml-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.sqlhtml-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.sqlhtml-module.html
@@ -0,0 +1,111 @@
+
+
+
+
+  sqlhtml
+  
+  
+
+
+
+
    Module sqlhtml
    
+
    
+  
    Classes
    
+  
    
+    AutocompleteWidget
      
    
+  
    
+    BooleanWidget
      
    
+  
    
+    CheckboxesWidget
      
    
+  
    
+    DateWidget
      
    
+  
    
+    DatetimeWidget
      
    
+  
    
+    DecimalWidget
      
    
+  
    
+    DoubleWidget
      
    
+  
    
+    FormWidget
      
    
+  
    
+    IntegerWidget
      
    
+  
    
+    ListWidget
      
    
+  
    
+    MultipleOptionsWidget
      
    
+  
    
+    OptionsWidget
      
    
+  
    
+    PasswordWidget
      
    
+  
    
+    RadioWidget
      
    
+  
    
+    SQLFORM
      
    
+  
    
+    SQLTABLE
      
    
+  
    
+    StringWidget
      
    
+  
    
+    TextWidget
      
    
+  
    
+    TimeWidget
      
    
+  
    
+    UploadWidget
      
    
+  
    Functions
    
+  
    
+    form_factory
      
    
+  
    
+    represent
      
    
+  
    
+    safe_float
      
    
+  
    
+    safe_int
      
    
+  
    Variables
    
+  
    
+    table_field
      
    
+  
    
+    widget_class
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.storage-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.storage-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.storage-module.html
@@ -0,0 +1,53 @@
+
+
+
+
+  storage
+  
+  
+
+
+
+
    Module storage
    
+
    
+  
    Classes
    
+  
    
+    List
      
    
+  
    
+    Messages
      
    
+  
    
+    Settings
      
    
+  
    
+    Storage
      
    
+  
    
+    StorageList
      
    
+  
    Functions
    
+  
    
+    load_storage
      
    
+  
    
+    save_storage
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.streamer-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.streamer-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.streamer-module.html
@@ -0,0 +1,47 @@
+
+
+
+
+  streamer
+  
+  
+
+
+
+
    Module streamer
    
+
    
+  
    Functions
    
+  
    
+    stream_file_or_304_or_206
      
    
+  
    
+    streamer
      
    
+  
    Variables
    
+  
    
+    DEFAULT_CHUNK_SIZE
      
    
+  
    
+    regex_start_range
      
    
+  
    
+    regex_stop_range
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.template-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.template-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.template-module.html
@@ -0,0 +1,40 @@
+
+
+
+
+  template
+  
+  
+
+
+
+
    Module template
    
+
    
+  
    Classes
    
+    BlockNode
        Content
        Node
        SuperNode
        TemplateParser
      
    Functions
    
+    get_parsed
        parse_template
        render
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.tools-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.tools-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.tools-module.html
@@ -0,0 +1,81 @@
+
+
+
+
+  tools
+  
+  
+
+
+
+
    Module tools
    
+
    
+  
    Classes
    
+    Auth
        Crud
        Mail
        PluginManager
        Recaptcha
        Service
      
    Functions
    
+  
    
+    DEFAULT
      
    
+  
    
+    addrow
      
    
+  
    
+    call_or_redirect
      
    
+  
    
+    callback
      
    
+  
    
+    completion
      
    
+    fetch
        geocode
        prettydate
      
    
+    test_thread_separation
      
    
+  
    
+    universal_caller
      
    
+  
    
+    validators
      
    
+  
    Variables
    
+  
    
+    ON
      
    
+  
    
+    TAG
      
    
+  
    
+    current
      
    
+  
    
+    logger
      
    
+  
    
+    regex_geocode
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.utils-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.utils-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.utils-module.html
@@ -0,0 +1,56 @@
+
+
+
+
+  utils
+  
+  
+
+
+
+
    Module utils
    
+
    
+  
    Functions
    
+  
    
+    get_digest
      
    
+  
    
+    hmac_hash
      
    
+  
    
+    initialize_urandom
      
    
+  
    
+    md5_hash
      
    
+  
    
+    simple_hash
      
    
+  
    
+    web2py_uuid
      
    
+  
    Variables
    
+  
    
+    ctokens
      
    
+  
    
+    logger
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.validators-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.validators-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.validators-module.html
@@ -0,0 +1,189 @@
+
+
+
+
+  validators
+  
+  
+
+
+
+
    Module validators
    
+
    
+  
    Classes
    
+  
    
+    CLEANUP
      
    
+  
    
+    CRYPT
      
    
+  
    
+    IS_ALPHANUMERIC
      
    
+  
    
+    IS_DATE
      
    
+  
    
+    IS_DATETIME
      
    
+  
    
+    IS_DATETIME_IN_RANGE
      
    
+  
    
+    IS_DATE_IN_RANGE
      
    
+  
    
+    IS_DECIMAL_IN_RANGE
      
    
+  
    
+    IS_EMAIL
      
    
+  
    
+    IS_EMPTY_OR
      
    
+  
    
+    IS_EQUAL_TO
      
    
+  
    
+    IS_EXPR
      
    
+  
    
+    IS_FLOAT_IN_RANGE
      
    
+  
    
+    IS_GENERIC_URL
      
    
+  
    
+    IS_HTTP_URL
      
    
+  
    
+    IS_IMAGE
      
    
+  
    
+    IS_INT_IN_RANGE
      
    
+  
    
+    IS_IN_DB
      
    
+  
    
+    IS_IN_SET
      
    
+  
    
+    IS_IN_SUBSET
      
    
+  
    
+    IS_IPV4
      
    
+  
    
+    IS_LENGTH
      
    
+  
    
+    IS_LIST_OF
      
    
+  
    
+    IS_LOWER
      
    
+  
    
+    IS_MATCH
      
    
+  
    
+    IS_NOT_EMPTY
      
    
+  
    
+    IS_NOT_IN_DB
      
    
+  
    
+    IS_NULL_OR
      
    
+  
    
+    IS_SLUG
      
    
+  
    
+    IS_STRONG
      
    
+  
    
+    IS_TIME
      
    
+  
    
+    IS_UPLOAD_FILENAME
      
    
+  
    
+    IS_UPPER
      
    
+  
    
+    IS_URL
      
    
+  
    
+    Validator
      
    
+  
    Functions
    
+  
    
+    escape_unicode
      
    
+  
    
+    is_empty
      
    
+  
    
+    options_sorter
      
    
+  
    
+    translate
      
    
+  
    
+    unicode_to_ascii_authority
      
    
+  
    
+    unicode_to_ascii_url
      
    
+  
    
+    urlify
      
    
+  
    Variables
    
+  
    
+    all_url_schemes
      
    
+  
    
+    http_schemes
      
    
+  
    
+    label_split_regex
      
    
+  
    
+    official_top_level_domains
      
    
+  
    
+    official_url_schemes
      
    
+  
    
+    regex1
      
    
+  
    
+    regex2
      
    
+  
    
+    regex_time
      
    
+  
    
+    unofficial_url_schemes
      
    
+  
    
+    url_split_regex
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.widget-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.widget-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.widget-module.html
@@ -0,0 +1,47 @@
+
+
+
+
+  widget
+  
+  
+
+
+
+
    Module widget
    
+
    
+  
    Classes
    
+    BaseException
        IO
        web2pyDialog
      
    Functions
    
+    console
        presentation
        start
        start_browser
        try_start_browser
      
    Variables
    
+    ProgramAuthor
        ProgramInfo
        ProgramName
        ProgramVersion
        logger
        msg
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.winservice-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.winservice-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.winservice-module.html
@@ -0,0 +1,39 @@
+
+
+
+
+  winservice
+  
+  
+
+
+
+
    Module winservice
    
+
    
+  
    Classes
    
+  
    
+    Service
      
    
+  
    
+    Web2pyService
      
    
+  
    Functions
    
+    web2py_windows_service_handler
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc-web2py.gluon.xmlrpc-module.html
Index: applications/examples/static/epydoc/toc-web2py.gluon.xmlrpc-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc-web2py.gluon.xmlrpc-module.html
@@ -0,0 +1,34 @@
+
+
+
+
+  xmlrpc
+  
+  
+
+
+
+
    Module xmlrpc
    
+
    
+  
    Functions
    
+  
    
+    handler
      
    
+
    
+[hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/toc.html
Index: applications/examples/static/epydoc/toc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/toc.html
@@ -0,0 +1,132 @@
+
+
+
+
+  Table of Contents
+  
+  
+
+
+
+
    Table of Contents
    
+
    
+  Everything
+  
    
+  
    Modules
    
+    psycopg2
        psycopg2.tz
        sqlite3.dbapi2
        web2py.gluon
        web2py.gluon.admin
        web2py.gluon.cache
      
    
+    web2py.gluon.cfs
      
    
+    web2py.gluon.compileapp
      
    
+    web2py.gluon.contenttype
      
    
+  
    
+    web2py.gluon.contrib.pymysql
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants
      
    
+  
    
+    web2py.gluon.contrib.pymysql.constants.FIELD_TYPE
      
    
+  
    
+    web2py.gluon.contrib.pymysql.converters
      
    
+    web2py.gluon.custom_import
      
    
+    web2py.gluon.dal
      
    
+    web2py.gluon.debug
      
    
+    web2py.gluon.decoder
      
    
+  
    
+    web2py.gluon.fileutils
      
    
+  
    
+    web2py.gluon.globals
      
    
+  
    
+    web2py.gluon.highlight
      
    
+  
    
+    web2py.gluon.html
      
    
+  
    
+    web2py.gluon.http
      
    
+    web2py.gluon.import_all
      
    
+    web2py.gluon.languages
      
    
+    web2py.gluon.main
      
    
+    web2py.gluon.myregex
      
    
+    web2py.gluon.newcron
      
    
+    web2py.gluon.portalocker
      
    
+    web2py.gluon.reserved_sql_keywords
        web2py.gluon.restricted
      
    
+    web2py.gluon.rewrite
      
    
+    web2py.gluon.rocket
      
    
+    web2py.gluon.sanitizer
      
    
+  
    
+    web2py.gluon.serializers
      
    
+  
    
+    web2py.gluon.settings
      
    
+    web2py.gluon.shell
        web2py.gluon.sql
      
    
+    web2py.gluon.sqlhtml
      
    
+  
    
+    web2py.gluon.storage
      
    
+  
    
+    web2py.gluon.streamer
      
    
+    web2py.gluon.template
        web2py.gluon.tools
      
    
+    web2py.gluon.utils
      
    
+  
    
+    web2py.gluon.validators
      
    
+    web2py.gluon.widget
        web2py.gluon.winservice
      
    
+    web2py.gluon.xmlrpc
      
    
+
    
+  [hide private]
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon-module.html
Index: applications/examples/static/epydoc/web2py.gluon-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon-module.html
@@ -0,0 +1,1286 @@
+
+
+
+
+  web2py.gluon
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Package gluon
    source code

    
+This file is part of the web2py Web Framework Copyrighted by Massimo 
+  Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)
+  
    Web2Py framework modules


    
+
+
+
+
+
+  
+
+  
+
    
+    
+      
+        
+        
+      
+    
    Submodules[hide private]
    
+  
    
+  
      
+    
    •  web2py.gluon.admin: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
      • 
+    
    •  web2py.gluon.cache: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
      • 
+    
    •  web2py.gluon.cfs: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
      • 
+    
    •  web2py.gluon.compileapp: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
      • 
+    
    •  web2py.gluon.contenttype: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
      • 
+    
    •  web2py.gluon.contrib
+    
+    
      • 
+    
    •  web2py.gluon.custom_import    
      • 
+    
    •  web2py.gluon.dal: This file is part of the web2py Web Framework...    
      • 
+    
    •  web2py.gluon.debug: This file is part of the web2py Web Framework Developed by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu>, limodou 
+        <limodou@gmail.com> and srackham 
+        <srackham@gmail.com>.    
      • 
+    
    •  web2py.gluon.decoder    
      • 
+    
    •  web2py.gluon.fileutils: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
      • 
+    
    •  web2py.gluon.globals: This file is part of the web2py Web Framework...    
      • 
+    
    •  web2py.gluon.highlight: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
      • 
+    
    •  web2py.gluon.html: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
      • 
+    
    •  web2py.gluon.http: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
      • 
+    
    •  web2py.gluon.import_all: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
      • 
+    
    •  web2py.gluon.languages: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
      • 
+    
    •  web2py.gluon.main: This file is part of the web2py Web Framework...    
      • 
+    
    •  web2py.gluon.myregex: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
      • 
+    
    •  web2py.gluon.newcron: Created by Attila Csipa <web2py@csipa.in.rs> Modified by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu>    
      • 
+    
    •  web2py.gluon.portalocker: Cross-platform (posix/nt) API for flock-style file locking.    
      • 
+    
    •  web2py.gluon.reserved_sql_keywords    
      • 
+    
    •  web2py.gluon.restricted: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
      • 
+    
    •  web2py.gluon.rewrite: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
      • 
+    
    •  web2py.gluon.rocket    
      • 
+    
    •  web2py.gluon.sanitizer: :    
      • 
+    
    •  web2py.gluon.serializers: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
      • 
+    
    •  web2py.gluon.settings: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
      • 
+    
    •  web2py.gluon.shell: This file is part of the web2py Web Framework Developed by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu>, limodou 
+        <limodou@gmail.com> and srackham 
+        <srackham@gmail.com>.    
      • 
+    
    •  web2py.gluon.sql    
      • 
+    
    •  web2py.gluon.sqlhtml: This file is part of the web2py Web Framework...    
      • 
+    
    •  web2py.gluon.storage: This file is part of the web2py Web Framework...    
      • 
+    
    •  web2py.gluon.streamer: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
      • 
+    
    •  web2py.gluon.template: This file is part of the web2py Web Framework (Copyrighted, 2007-2011).    
      • 
+    
    •  web2py.gluon.tools: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
      • 
+    
    •  web2py.gluon.utils: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
      • 
+    
    •  web2py.gluon.validators: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
      • 
+    
    •  web2py.gluon.widget: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
      • 
+    
    •  web2py.gluon.xmlrpc: This file is part of the web2py Web Framework Copyrighted by 
+        Massimo Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+        (http://www.gnu.org/licenses/lgpl.html)    
      • 
+  
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        HTTP
+    
    
+       
+    
+        DAL
    
+      an instance of this class represents a database connection
+    
    
+       
+    
+        Field
    
+      an instance of this class represents a database field
+    
    
+       
+    
+        SQLFORM
    
+      SQLFORM is used to map a table (and a current record) into an HTML form
+
+given a SQLTable stored in db.table
+
+generates an insert form::
+
+    SQLFORM(db.table)
+
+generates an update form::
+
+    record=db.table[some_id]
+    SQLFORM(db.table, record)
+
+generates an update with a delete button::
+
+    SQLFORM(db.table, record, deletable=True)
+
+if record is an int::
+
+    record=db.table[record]
+
+optional arguments:
+
+:param fields: a list of fields that should be placed in the form,
+    default is all.
+    
    
+       
+    
+        SQLTABLE
    
+      given a Rows object, as returned by a db().select(), generates
+an html table with the rows.
+    
    
+       
+    
+        A
+    
    
+       
+    
+        B
+    
    
+       
+    
+        BEAUTIFY
    
+      example::
+
+    >>> BEAUTIFY(['a', 'b', {'hello': 'world'}]).xml()
+    '<div><table><tr><td><div>a</div></td></tr><tr><td><div>b</div></td></tr><tr><td><div><table><tr><td style="font-weight:bold;">hello</td><td valign="top">:</td><td><div>world</div></td></tr></table></div></td></tr></table></div>'
+
+turns any list, dictionary, etc into decent looking html.
+    
    
+       
+    
+        BODY
+    
    
+       
+    
+        BR
+    
    
+       
+    
+        CAT
+    
    
+       
+    
+        CENTER
+    
    
+       
+    
+        CLEANUP
    
+      example:
+    
    
+       
+    
+        CODE
    
+      displays code in HTML with syntax highlighting.
+    
    
+       
+    
+        CRYPT
    
+      example:
+    
    
+       
+    
+        DIV
    
+      HTML helper, for easy generating and manipulating a DOM 
+        structure.
+    
    
+       
+    
+        EM
+    
    
+       
+    
+        EMBED
+    
    
+       
+    
+        FIELDSET
+    
    
+       
+    
+        FORM
    
+      example:
+    
    
+       
+    
+        H1
+    
    
+       
+    
+        H2
+    
    
+       
+    
+        H3
+    
    
+       
+    
+        H4
+    
    
+       
+    
+        H5
+    
    
+       
+    
+        H6
+    
    
+       
+    
+        HEAD
+    
    
+       
+    
+        HR
+    
    
+       
+    
+        HTML
    
+      There are four predefined document type definitions.
+    
    
+       
+    
+        I
+    
    
+       
+    
+        IFRAME
+    
    
+       
+    
+        IMG
+    
    
+       
+    
+        INPUT
    
+      INPUT Component
+
+examples::
+
+    >>> INPUT(_type='text', _name='name', value='Max').xml()
+    '<input name="name" type="text" value="Max" />'
+
+    >>> INPUT(_type='checkbox', _name='checkbox', value='on').xml()
+    '<input checked="checked" name="checkbox" type="checkbox" value="on" />'
+
+    >>> INPUT(_type='radio', _name='radio', _value='yes', value='yes').xml()
+    '<input checked="checked" name="radio" type="radio" value="yes" />'
+
+    >>> INPUT(_type='radio', _name='radio', _value='no', value='yes').xml()
+    '<input name="radio" type="radio" value="no" />'
+
+the input helper takes two special attributes value= and requires=.
+    
    
+       
+    
+        IS_ALPHANUMERIC
    
+      example:
+    
    
+       
+    
+        IS_DATE
    
+      example:
+    
    
+       
+    
+        IS_DATETIME
    
+      example:
+    
    
+       
+    
+        IS_DATETIME_IN_RANGE
    
+      example:
+    
    
+       
+    
+        IS_DATE_IN_RANGE
    
+      example:
+    
    
+       
+    
+        IS_DECIMAL_IN_RANGE
    
+      Determine that the argument is (or can be represented as) a 
+        Python Decimal, and that it falls within the specified inclusive 
+        range.
+    
    
+       
+    
+        IS_EMAIL
    
+      Checks if field's value is a valid email address.
+    
    
+       
+    
+        IS_EMPTY_OR
    
+      dummy class for testing IS_EMPTY_OR
+    
    
+       
+    
+        IS_EQUAL_TO
    
+      example:
+    
    
+       
+    
+        IS_EXPR
    
+      example:
+    
    
+       
+    
+        IS_FLOAT_IN_RANGE
    
+      Determine that the argument is (or can be represented as) a 
+        float, and that it falls within the specified inclusive range.
+    
    
+       
+    
+        IS_IMAGE
    
+      Checks if file uploaded through file input was saved in one of 
+        selected image formats and has dimensions (width and height) within
+        given boundaries.
+    
    
+       
+    
+        IS_INT_IN_RANGE
    
+      Determine that the argument is (or can be represented as) an 
+        int, and that it falls within the specified range.
+    
    
+       
+    
+        IS_IN_DB
    
+      example:
+    
    
+       
+    
+        IS_IN_SET
    
+      example:
+    
    
+       
+    
+        IS_IPV4
    
+      Checks if field's value is an IP version 4 address in decimal form.
+    
    
+       
+    
+        IS_LENGTH
    
+      Checks if length of field's value fits between given 
+        boundaries.
+    
    
+       
+    
+        IS_LIST_OF
+    
    
+       
+    
+        IS_LOWER
    
+      convert to lower case
+    
    
+       
+    
+        IS_MATCH
    
+      example:
+    
    
+       
+    
+        IS_NOT_EMPTY
    
+      example:
+    
    
+       
+    
+        IS_NOT_IN_DB
    
+      example:
+    
    
+       
+    
+        IS_NULL_OR
    
+      dummy class for testing IS_EMPTY_OR
+    
    
+       
+    
+        IS_SLUG
    
+      convert arbitrary text string to a slug
+    
    
+       
+    
+        IS_STRONG
    
+      example:
+    
    
+       
+    
+        IS_TIME
    
+      example:
+    
    
+       
+    
+        IS_UPLOAD_FILENAME
    
+      Checks if name and extension of file uploaded through file input matches
+given criteria.
+    
    
+       
+    
+        IS_UPPER
    
+      convert to upper case
+    
    
+       
+    
+        IS_URL
    
+      Rejects a URL string if any of the following is true:
+   * The string is empty or None
+   * The string uses characters that are not allowed in a URL
+   * The string breaks any of the HTTP syntactic rules
+   * The URL scheme specified (if one is specified) is not 'http' or 'https'
+   * The top-level domain (if a host name is specified) does not exist
+
+(These rules are based on RFC 2616: http://www.faqs.org/rfcs/rfc2616.html)
+
+This function only checks the URL's syntax.
+    
    
+       
+    
+        LABEL
+    
    
+       
+    
+        LEGEND
+    
    
+       
+    
+        LI
+    
    
+       
+    
+        LINK
+    
    
+       
+    
+        MARKMIN
    
+      For documentation: 
+        http://web2py.com/examples/static/markmin.html
+    
    
+       
+    
+        MENU
    
+      Used to build menus...
+    
    
+       
+    
+        META
+    
    
+       
+    
+        OBJECT
+    
    
+       
+    
+        OL
+    
    
+       
+    
+        OPTGROUP
+    
    
+       
+    
+        OPTION
+    
    
+       
+    
+        P
    
+      Will replace ``\n`` by ``<br />`` if the `cr2br` attribute
+        is provided.
+    
    
+       
+    
+        PRE
+    
    
+       
+    
+        SCRIPT
+    
    
+       
+    
+        SELECT
    
+      example:
+    
    
+       
+    
+        SPAN
+    
    
+       
+    
+        STYLE
+    
    
+       
+    
+        TABLE
    
+      TABLE Component.
+    
    
+       
+    
+        TBODY
+    
    
+       
+    
+        TD
+    
    
+       
+    
+        TEXTAREA
    
+      example:
+    
    
+       
+    
+        TFOOT
+    
    
+       
+    
+        TH
+    
    
+       
+    
+        THEAD
+    
    
+       
+    
+        TITLE
+    
    
+       
+    
+        TR
    
+      TR Component.
+    
    
+       
+    
+        TT
+    
    
+       
+    
+        UL
    
+      UL Component.
+    
    
+       
+    
+        XHTML
    
+      This is XHTML version of the HTML helper.
+    
    
+       
+    
+        XML
    
+      use it to wrap a string that contains XML/HTML so that it will 
+        not be escaped by the template
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    redirect(location,
+        how=303)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    URL(a=1,
+        c=1,
+        f=1,
+        r=1,
+        args=[],
+        vars={},
+        anchor='',
+        extension=1,
+        env=1,
+        hmac_key=1,
+        hash_vars=True,
+        salt=1,
+        user_signature=1,
+        scheme=1,
+        host=1,
+        port=1)
    
+      generate a URL
+
+example::
+
+    >>> str(URL(a='a', c='c', f='f', args=['x', 'y', 'z'],
+    ...    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    embed64(filename=1,
+        file=1,
+        data=1,
+        extension='image/gif')
    
+      helper to encode the provided (binary) data into base64.    		
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        current = threading.local()
+    
    
+       
+    
+        ON = True
+    
    
+       
+    
+        TAG = __TAG__()
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Function Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    URL(a=1,
+        c=1,
+        f=1,
+        r=1,
+        args=[],
+        vars={},
+        anchor='',
+        extension=1,
+        env=1,
+        hmac_key=1,
+        hash_vars=True,
+        salt=1,
+        user_signature=1,
+        scheme=1,
+        host=1,
+        port=1)
+  
    
+      		source code 
+    
    
+  
+  
    +
+generate a URL
+
+example::
+
+    >>> str(URL(a='a', c='c', f='f', args=['x', 'y', 'z'],
+    ...     vars={'p':1, 'q':2}, anchor='1'))
+    '/a/c/f/x/y/z?p=1&q=2#1'
+
+    >>> str(URL(a='a', c='c', f='f', args=['x', 'y', 'z'],
+    ...     vars={'p':(1,3), 'q':2}, anchor='1'))
+    '/a/c/f/x/y/z?p=1&p=3&q=2#1'
+
+    >>> str(URL(a='a', c='c', f='f', args=['x', 'y', 'z'],
+    ...     vars={'p':(3,1), 'q':2}, anchor='1'))
+    '/a/c/f/x/y/z?p=3&p=1&q=2#1'
+
+    >>> str(URL(a='a', c='c', f='f', anchor='1+2'))
+    '/a/c/f#1%2B2'
+
+    >>> str(URL(a='a', c='c', f='f', args=['x', 'y', 'z'],
+    ...     vars={'p':(1,3), 'q':2}, anchor='1', hmac_key='key'))
+    '/a/c/f/x/y/z?p=1&p=3&q=2&_signature=5d06bb8a4a6093dd325da2ee591c35c61afbd3c6#1'
+
+generates a url '/a/c/f' corresponding to application a, controller c
+and function f. If r=request is passed, a, c, f are set, respectively,
+to r.application, r.controller, r.function.
+
+The more typical usage is:
+
+URL(r=request, f='index') that generates a url for the index function
+within the present application and controller.
+
+:param a: application (default to current if r is given)
+:param c: controller (default to current if r is given)
+:param f: function (default to current if r is given)
+:param r: request (optional)
+:param args: any arguments (optional)
+:param vars: any variables (optional)
+:param anchor: anchorname, without # (optional)
+:param hmac_key: key to use when generating hmac signature (optional)
+:param hash_vars: which of the vars to include in our hmac signature
+    True (default) - hash all vars, False - hash none of the vars,
+    iterable - hash only the included vars ['key1','key2']
+:param scheme: URI scheme (True, 'http' or 'https', etc); forces absolute URL (optional)
+:param host: string to force absolute URL with host (True means http_host)
+:param port: optional port number (forces absolute URL)
+
+:raises SyntaxError: when no application, controller or function is
+    available
+:raises SyntaxError: when a CRLF is found in the generated url
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    embed64(filename=1,
+        file=1,
+        data=1,
+        extension='image/gif')
+  
    
+      		source code 
+    
    
+  
+  
    helper to encode the provided (binary) data into base64.
    
+  :param filename: if provided, opens and reads this file in 'rb' mode 
+  :param file: if provided, reads this file :param data: if provided, uses 
+  the provided data
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:58 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon-pysrc.html
@@ -0,0 +1,144 @@
+
+
+
+
+  web2py.gluon
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Package web2py.gluon
    
+
    + 1  #!/usr/bin/env python 
+ 2  # -*- coding: utf-8 -*- 
+ 3  """ 
+ 4  This file is part of the web2py Web Framework 
+ 5  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+ 6  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+ 7   
+ 8   
+ 9  Web2Py framework modules 
+10  ======================== 
+11  """ 
+12   
+13  __all__ = ['A', 'B', 'BEAUTIFY', 'BODY', 'BR', 'CAT', 'CENTER', 'CLEANUP', 'CODE', 'CRYPT', 'DAL', 'DIV', 'EM', 'EMBED', 'FIELDSET', 'FORM', 'Field', 'H1', 'H2', 'H3', 'H4', 'H5', 'H6', 'HEAD', 'HR', 'HTML', 'HTTP', 'I', 'IFRAME', 'IMG', 'INPUT', 'IS_ALPHANUMERIC', 'IS_DATE', 'IS_DATETIME', 'IS_DATETIME_IN_RANGE', 'IS_DATE_IN_RANGE', 'IS_DECIMAL_IN_RANGE', 'IS_EMAIL', 'IS_EMPTY_OR', 'IS_EQUAL_TO', 'IS_EXPR', 'IS_FLOAT_IN_RANGE', 'IS_IMAGE', 'IS_INT_IN_RANGE', 'IS_IN_DB', 'IS_IN_SET', 'IS_IPV4', 'IS_LENGTH', 'IS_LIST_OF', 'IS_LOWER', 'IS_MATCH', 'IS_NOT_EMPTY', 'IS_NOT_IN_DB', 'IS_NULL_OR', 'IS_SLUG', 'IS_STRONG', 'IS_TIME', 'IS_UPLOAD_FILENAME', 'IS_UPPER', 'IS_URL', 'LABEL', 'LEGEND', 'LI', 'LINK', 'MARKMIN', 'MENU', 'META', 'OBJECT', 'OL', 'ON', 'OPTGROUP', 'OPTION', 'P', 'PRE', 'SCRIPT', 'SELECT', 'SPAN', 'SQLFORM', 'SQLTABLE', 'STYLE', 'TABLE', 'TAG', 'TBODY', 'TD', 'TEXTAREA', 'TFOOT', 'TH', 'THEAD', 'TITLE', 'TR', 'TT', 'UL', 'URL', 'XHTML', 'XML','redirect','current','embed64'] 
+14   
+15  from globals import current 
+16  from html import * 
+17  from validators import * 
+18  from http import redirect, HTTP 
+19  from dal import DAL, Field 
+20  from sqlhtml import SQLFORM, SQLTABLE 
+21   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.admin-module.html
Index: applications/examples/static/epydoc/web2py.gluon.admin-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.admin-module.html
@@ -0,0 +1,898 @@
+
+
+
+
+  web2py.gluon.admin
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module admin
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module admin
    source code

    
+This file is part of the web2py Web Framework Copyrighted by Massimo 
+  Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)
+  
    Utility functions for the Admin application


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    apath(path='',
+        r=1)
    
+      Builds a path inside an application folder...    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    app_pack(app,
+        request)
    
+      Builds a w2p package for the application...    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    app_pack_compiled(app,
+        request)
    
+      Builds a w2p bytecode-compiled package for the application...    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    app_cleanup(app,
+        request)
    
+      Removes session, cache and error files...    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    app_compile(app,
+        request)
    
+      Compiles the application...    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    app_create(app,
+        request,
+        force=True,
+        key=1)
    
+      Create a copy of welcome.w2p (scaffolding) app...    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    app_install(app,
+        fobj,
+        request,
+        filename,
+        overwrite=1)
    
+      Installs an application:
+
+- Identifies file type by filename
+- Writes `fobj` contents to the `../deposit/` folder
+- Calls `w2p_unpack()` to do the job.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    app_uninstall(app,
+        request)
    
+      Uninstalls the application.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    plugin_pack(app,
+        plugin_name,
+        request)
    
+      Builds a w2p package for the application...    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    plugin_install(app,
+        fobj,
+        request,
+        filename)
    
+      Installs an application:
+
+- Identifies file type by filename
+- Writes `fobj` contents to the `../deposit/` folder
+- Calls `w2p_unpack()` to do the job.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    check_new_version(myversion,
+        version_URL)
    
+      Compares current web2py's version with the latest stable web2py version.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    unzip(filename,
+        dir,
+        subfolder='')
    
+      Unzips filename into dir (.zip only, no .gz etc) if subfolder!='' 
+      it unzip only files in subfolder    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    upgrade(request,
+        url='http://web2py.com')
    
+      Upgrades web2py (src, osx, win) is a new version is posted.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    add_path_first(path)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    create_missing_folders()
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    create_missing_app_folders(request)
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Function Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    apath(path='',
+        r=1)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Builds a path inside an application folder
+
+Parameters
+----------
+path:
+    path within the application folder
+r:
+    the global request object
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    app_pack(app,
+        request)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Builds a w2p package for the application
+
+Parameters
+----------
+app:
+    application name
+request:
+    the global request object
+
+Returns
+-------
+filename:
+    filename of the w2p file or None on error
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    app_pack_compiled(app,
+        request)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Builds a w2p bytecode-compiled package for the application
+
+Parameters
+----------
+app:
+    application name
+request:
+    the global request object
+
+Returns
+-------
+filename:
+    filename of the w2p file or None on error
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    app_cleanup(app,
+        request)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Removes session, cache and error files
+
+Parameters
+----------
+app:
+    application name
+request:
+    the global request object
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    app_compile(app,
+        request)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Compiles the application
+
+Parameters
+----------
+app:
+    application name
+request:
+    the global request object
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    app_create(app,
+        request,
+        force=True,
+        key=1)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Create a copy of welcome.w2p (scaffolding) app
+
+Parameters
+----------
+app:
+    application name
+request:
+    the global request object
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    app_install(app,
+        fobj,
+        request,
+        filename,
+        overwrite=1)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Installs an application:
+
+- Identifies file type by filename
+- Writes `fobj` contents to the `../deposit/` folder
+- Calls `w2p_unpack()` to do the job.
+
+Parameters
+----------
+app:
+    new application name
+fobj:
+    file object containing the application to be installed
+request:
+    the global request object
+filename:
+    original filename of the `fobj`, required to determine extension
+
+Returns
+-------
+upname:
+    name of the file where app is temporarily stored or `None` on failure
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    app_uninstall(app,
+        request)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Uninstalls the application.
+
+Parameters
+----------
+app:
+    application name
+request:
+    the global request object
+
+Returns
+-------
+`True` on success, `False` on failure
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    plugin_pack(app,
+        plugin_name,
+        request)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Builds a w2p package for the application
+
+Parameters
+----------
+app:
+    application name
+plugin_name:
+    the name of the plugin without plugin_ prefix
+request:
+    the current request app
+
+Returns
+-------
+filename:
+    filename of the w2p file or None on error
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    plugin_install(app,
+        fobj,
+        request,
+        filename)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Installs an application:
+
+- Identifies file type by filename
+- Writes `fobj` contents to the `../deposit/` folder
+- Calls `w2p_unpack()` to do the job.
+
+Parameters
+----------
+app:
+    new application name
+fobj:
+    file object containing the application to be installed
+request:
+    the global request object
+filename:
+    original filename of the `fobj`, required to determine extension
+
+Returns
+-------
+upname:
+    name of the file where app is temporarily stored or `None` on failure
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    check_new_version(myversion,
+        version_URL)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Compares current web2py's version with the latest stable web2py version.
+
+Parameters
+----------
+myversion:
+    the current version as stored in file `web2py/VERSION`
+version_URL:
+    the URL that contains the version of the latest stable release
+
+Returns
+-------
+state:
+    `True` if upgrade available, `False` if current version if up-to-date,
+    -1 on error
+version:
+    the most up-to-version available
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    upgrade(request,
+        url='http://web2py.com')
+  
    
+      		source code 
+    
    
+  
+  
    +
+Upgrades web2py (src, osx, win) is a new version is posted.
+It detects whether src, osx or win is running and downloads the right one
+
+Parameters
+----------
+request:
+    the current request object, required to determine version and path
+url:
+    the incomplete url where to locate the latest web2py
+    actual url is url+'/examples/static/web2py_(src|osx|win).zip'
+
+Returns
+-------
+    True on success, False on failure (network problem or old version)
+
+
    
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:58 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.admin-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.admin-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.admin-pysrc.html
@@ -0,0 +1,599 @@
+
+
+
+
+  web2py.gluon.admin
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module admin
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.admin
    
+
    +  1  """ 
+  2  This file is part of the web2py Web Framework 
+  3  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+  4  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+  5   
+  6  Utility functions for the Admin application 
+  7  =========================================== 
+  8  """ 
+  9  import os 
+ 10  import sys 
+ 11  import traceback 
+ 12  import zipfile 
+ 13  import urllib 
+ 14  from shutil import rmtree 
+ 15  from utils import web2py_uuid 
+ 16  from fileutils import w2p_pack, w2p_unpack, w2p_pack_plugin, w2p_unpack_plugin 
+ 17  from fileutils import up, fix_newlines, abspath, recursive_unlink 
+ 18  from fileutils import read_file, write_file 
+ 19  from restricted import RestrictedError 
+ 20  from settings import global_settings 
+ 21   
+
     22 -def apath(path='', r=None): 
+
     23      """ 
+ 24      Builds a path inside an application folder 
+ 25   
+ 26      Parameters 
+ 27      ---------- 
+ 28      path: 
+ 29          path within the application folder 
+ 30      r: 
+ 31          the global request object 
+ 32   
+ 33      """ 
+ 34   
+ 35      opath = up(r.folder) 
+ 36      while path[:3] == '../': 
+ 37          (opath, path) = (up(opath), path[3:]) 
+ 38      return os.path.join(opath, path).replace('\\', '/') 
+
     39   
+ 40   
+
     41 -def app_pack(app, request): 
+
     42      """ 
+ 43      Builds a w2p package for the application 
+ 44   
+ 45      Parameters 
+ 46      ---------- 
+ 47      app: 
+ 48          application name 
+ 49      request: 
+ 50          the global request object 
+ 51   
+ 52      Returns 
+ 53      ------- 
+ 54      filename: 
+ 55          filename of the w2p file or None on error 
+ 56      """ 
+ 57      try: 
+ 58          app_cleanup(app, request) 
+ 59          filename = apath('../deposit/%s.w2p' % app, request) 
+ 60          w2p_pack(filename, apath(app, request)) 
+ 61          return filename 
+ 62      except Exception: 
+ 63          return False 
+
     64   
+ 65   
+
     66 -def app_pack_compiled(app, request): 
+
     67      """ 
+ 68      Builds a w2p bytecode-compiled package for the application 
+ 69   
+ 70      Parameters 
+ 71      ---------- 
+ 72      app: 
+ 73          application name 
+ 74      request: 
+ 75          the global request object 
+ 76   
+ 77      Returns 
+ 78      ------- 
+ 79      filename: 
+ 80          filename of the w2p file or None on error 
+ 81      """ 
+ 82   
+ 83      try: 
+ 84          filename = apath('../deposit/%s.w2p' % app, request) 
+ 85          w2p_pack(filename, apath(app, request), compiled=True) 
+ 86          return filename 
+ 87      except Exception: 
+ 88          return None 
+
     89   
+
     90 -def app_cleanup(app, request): 
+
     91      """ 
+ 92      Removes session, cache and error files 
+ 93   
+ 94      Parameters 
+ 95      ---------- 
+ 96      app: 
+ 97          application name 
+ 98      request: 
+ 99          the global request object 
+100      """ 
+101      r = True 
+102   
+103      # Remove error files 
+104      path = apath('%s/errors/' % app, request) 
+105      if os.path.exists(path): 
+106          for f in os.listdir(path): 
+107              try: 
+108                  if f[:1]!='.': os.unlink(os.path.join(path,f)) 
+109              except IOError: 
+110                  r = False 
+111   
+112      # Remove session files 
+113      path = apath('%s/sessions/' % app, request) 
+114      if os.path.exists(path): 
+115          for f in os.listdir(path): 
+116              try: 
+117                  if f[:1]!='.': recursive_unlink(os.path.join(path,f)) 
+118              except IOError: 
+119                  r = False 
+120   
+121      # Remove cache files 
+122      path = apath('%s/sessions/' % app, request) 
+123      if os.path.exists(path): 
+124          for f in os.listdir(path): 
+125              try: 
+126                  if f[:1]!='.': os.unlink(os.path.join(path,f)) 
+127              except IOError: 
+128                  r = False 
+129      return r 
+
    130   
+131   
+
    132 -def app_compile(app, request): 
+
    133      """ 
+134      Compiles the application 
+135   
+136      Parameters 
+137      ---------- 
+138      app: 
+139          application name 
+140      request: 
+141          the global request object 
+142      """ 
+143      from compileapp import compile_application, remove_compiled_application 
+144      folder = apath(app, request) 
+145      try: 
+146          compile_application(folder) 
+147          return None 
+148      except (Exception, RestrictedError): 
+149          tb = traceback.format_exc(sys.exc_info) 
+150          remove_compiled_application(folder) 
+151          return tb 
+
    152   
+
    153 -def app_create(app, request,force=False,key=None): 
+
    154      """ 
+155      Create a copy of welcome.w2p (scaffolding) app 
+156   
+157      Parameters 
+158      ---------- 
+159      app: 
+160          application name 
+161      request: 
+162          the global request object 
+163   
+164      """ 
+165      try: 
+166          path = apath(app, request) 
+167          os.mkdir(path) 
+168      except: 
+169          if not force: 
+170              return False 
+171      try: 
+172          w2p_unpack('welcome.w2p', path) 
+173          for subfolder in ['models','views','controllers', 'databases', 
+174                            'modules','cron','errors','sessions', 
+175                            'languages','static','private','uploads']: 
+176              subpath =  os.path.join(path,subfolder) 
+177              if not os.path.exists(subpath): 
+178                  os.mkdir(subpath) 
+179          db = os.path.join(path, 'models', 'db.py') 
+180          if os.path.exists(db): 
+181              data = read_file(db) 
+182              data = data.replace('<your secret key>', 
+183                                  'sha512:'+(key or web2py_uuid())) 
+184              write_file(db, data) 
+185          return True 
+186      except: 
+187          rmtree(path) 
+188          return False 
+
    189   
+190   
+
    191 -def app_install(app, fobj, request, filename, overwrite=None): 
+
    192      """ 
+193      Installs an application: 
+194   
+195      - Identifies file type by filename 
+196      - Writes `fobj` contents to the `../deposit/` folder 
+197      - Calls `w2p_unpack()` to do the job. 
+198   
+199      Parameters 
+200      ---------- 
+201      app: 
+202          new application name 
+203      fobj: 
+204          file object containing the application to be installed 
+205      request: 
+206          the global request object 
+207      filename: 
+208          original filename of the `fobj`, required to determine extension 
+209   
+210      Returns 
+211      ------- 
+212      upname: 
+213          name of the file where app is temporarily stored or `None` on failure 
+214      """ 
+215      did_mkdir = False 
+216      if filename[-4:] == '.w2p': 
+217          extension = 'w2p' 
+218      elif filename[-7:] == '.tar.gz': 
+219          extension = 'tar.gz' 
+220      else: 
+221          extension = 'tar' 
+222      upname = apath('../deposit/%s.%s' % (app, extension), request) 
+223   
+224      try: 
+225          write_file(upname, fobj.read(), 'wb') 
+226          path = apath(app, request) 
+227          if not overwrite: 
+228              os.mkdir(path) 
+229              did_mkdir = True 
+230          w2p_unpack(upname, path) 
+231          if extension != 'tar': 
+232              os.unlink(upname) 
+233          fix_newlines(path) 
+234          return upname 
+235      except Exception: 
+236          if did_mkdir: 
+237              rmtree(path) 
+238          return False 
+
    239   
+240   
+
    241 -def app_uninstall(app, request): 
+
    242      """ 
+243      Uninstalls the application. 
+244   
+245      Parameters 
+246      ---------- 
+247      app: 
+248          application name 
+249      request: 
+250          the global request object 
+251   
+252      Returns 
+253      ------- 
+254      `True` on success, `False` on failure 
+255      """ 
+256      try: 
+257          # Hey App, this is your end... 
+258          path = apath(app, request) 
+259          rmtree(path) 
+260          return True 
+261      except Exception: 
+262          return False 
+
    263   
+
    264 -def plugin_pack(app, plugin_name, request): 
+
    265      """ 
+266      Builds a w2p package for the application 
+267   
+268      Parameters 
+269      ---------- 
+270      app: 
+271          application name 
+272      plugin_name: 
+273          the name of the plugin without plugin_ prefix 
+274      request: 
+275          the current request app 
+276   
+277      Returns 
+278      ------- 
+279      filename: 
+280          filename of the w2p file or None on error 
+281      """ 
+282      try: 
+283          filename = apath('../deposit/web2py.plugin.%s.w2p' % plugin_name, request) 
+284          w2p_pack_plugin(filename, apath(app, request), plugin_name) 
+285          return filename 
+286      except Exception: 
+287          return False 
+
    288   
+
    289 -def plugin_install(app, fobj, request, filename): 
+
    290      """ 
+291      Installs an application: 
+292   
+293      - Identifies file type by filename 
+294      - Writes `fobj` contents to the `../deposit/` folder 
+295      - Calls `w2p_unpack()` to do the job. 
+296   
+297      Parameters 
+298      ---------- 
+299      app: 
+300          new application name 
+301      fobj: 
+302          file object containing the application to be installed 
+303      request: 
+304          the global request object 
+305      filename: 
+306          original filename of the `fobj`, required to determine extension 
+307   
+308      Returns 
+309      ------- 
+310      upname: 
+311          name of the file where app is temporarily stored or `None` on failure 
+312      """ 
+313   
+314      upname = apath('../deposit/%s' % filename, request) 
+315   
+316      try: 
+317          write_file(upname, fobj.read(), 'wb') 
+318          path = apath(app, request) 
+319          w2p_unpack_plugin(upname, path) 
+320          fix_newlines(path) 
+321          return upname 
+322      except Exception: 
+323          os.unlink(upname) 
+324          return False 
+
    325   
+
    326 -def check_new_version(myversion, version_URL): 
+
    327      """ 
+328      Compares current web2py's version with the latest stable web2py version. 
+329   
+330      Parameters 
+331      ---------- 
+332      myversion: 
+333          the current version as stored in file `web2py/VERSION` 
+334      version_URL: 
+335          the URL that contains the version of the latest stable release 
+336   
+337      Returns 
+338      ------- 
+339      state: 
+340          `True` if upgrade available, `False` if current version if up-to-date, 
+341          -1 on error 
+342      version: 
+343          the most up-to-version available 
+344      """ 
+345      try: 
+346          from urllib import urlopen 
+347          version = urlopen(version_URL).read() 
+348      except Exception: 
+349          return -1, myversion 
+350   
+351      if version > myversion: 
+352          return True, version 
+353      else: 
+354          return False, version 
+
    355   
+
    356 -def unzip(filename, dir, subfolder=''): 
+
    357      """ 
+358      Unzips filename into dir (.zip only, no .gz etc) 
+359      if subfolder!='' it unzip only files in subfolder 
+360      """ 
+361      filename = abspath(filename) 
+362      if not zipfile.is_zipfile(filename): 
+363          raise RuntimeError, 'Not a valid zipfile' 
+364      zf = zipfile.ZipFile(filename) 
+365      if not subfolder.endswith('/'): 
+366          subfolder = subfolder + '/' 
+367      n = len(subfolder) 
+368      for name in sorted(zf.namelist()): 
+369          if not name.startswith(subfolder): 
+370              continue 
+371          #print name[n:] 
+372          if name.endswith('/'): 
+373              folder = os.path.join(dir,name[n:]) 
+374              if not os.path.exists(folder): 
+375                  os.mkdir(folder) 
+376          else: 
+377              write_file(os.path.join(dir, name[n:]), zf.read(name), 'wb') 
+
    378   
+379   
+
    380 -def upgrade(request, url='http://web2py.com'): 
+
    381      """ 
+382      Upgrades web2py (src, osx, win) is a new version is posted. 
+383      It detects whether src, osx or win is running and downloads the right one 
+384   
+385      Parameters 
+386      ---------- 
+387      request: 
+388          the current request object, required to determine version and path 
+389      url: 
+390          the incomplete url where to locate the latest web2py 
+391          actual url is url+'/examples/static/web2py_(src|osx|win).zip' 
+392   
+393      Returns 
+394      ------- 
+395          True on success, False on failure (network problem or old version) 
+396      """ 
+397      web2py_version = request.env.web2py_version 
+398      gluon_parent = request.env.gluon_parent 
+399      if not gluon_parent.endswith('/'): 
+400          gluon_parent = gluon_parent + '/' 
+401      (check, version) = check_new_version(web2py_version, 
+402                                           url+'/examples/default/version') 
+403      if not check: 
+404          return (False, 'Already latest version') 
+405      if os.path.exists(os.path.join(gluon_parent, 'web2py.exe')): 
+406          version_type = 'win' 
+407          destination = gluon_parent 
+408          subfolder = 'web2py/' 
+409      elif gluon_parent.endswith('/Contents/Resources/'): 
+410          version_type = 'osx' 
+411          destination = gluon_parent[:-len('/Contents/Resources/')] 
+412          subfolder = 'web2py/web2py.app/' 
+413      else: 
+414          version_type = 'src' 
+415          destination = gluon_parent 
+416          subfolder = 'web2py/' 
+417   
+418      full_url = url + '/examples/static/web2py_%s.zip' % version_type 
+419      filename = abspath('web2py_%s_downloaded.zip' % version_type) 
+420      file = None 
+421      try: 
+422          write_file(filename, urllib.urlopen(full_url).read(), 'wb') 
+423      except Exception,e: 
+424          return False, e 
+425      try: 
+426          unzip(filename, destination, subfolder) 
+427          return True, None 
+428      except Exception,e: 
+429          return False, e 
+
    430   
+
    431 -def add_path_first(path): 
+
    432      sys.path = [path]+[p for p in sys.path if (not p==path and not p==(path+'/'))] 
+
    433   
+
    435      if not global_settings.web2py_runtime_gae: 
+436          for path in ('applications', 'deposit', 'site-packages', 'logs'): 
+437              path = abspath(path, gluon=True) 
+438              if not os.path.exists(path): 
+439                  os.mkdir(path) 
+440      paths = (global_settings.gluon_parent, abspath('site-packages', gluon=True),  abspath('gluon', gluon=True), '') 
+441      [add_path_first(path) for path in paths] 
+
    442   
+
    443 -def create_missing_app_folders(request): 
+
    444      if not global_settings.web2py_runtime_gae: 
+445          if request.folder not in global_settings.app_folders: 
+446              for subfolder in ('models', 'views', 'controllers', 'databases', 
+447                                'modules', 'cron', 'errors', 'sessions', 
+448                                'languages', 'static', 'private', 'uploads'): 
+449                  path =  os.path.join(request.folder, subfolder) 
+450                  if not os.path.exists(path): 
+451                      os.mkdir(path) 
+452              global_settings.app_folders.add(request.folder) 
+
    453   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:03 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.cfs-module.html
Index: applications/examples/static/epydoc/web2py.gluon.cfs-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.cfs-module.html
@@ -0,0 +1,244 @@
+
+
+
+
+  web2py.gluon.cfs
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module cfs
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module cfs
    source code

    
+This file is part of the web2py Web Framework Copyrighted by Massimo 
+  Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)
+  
    Functions required to execute app components
    
+    FOR INTERNAL USE ONLY

    
+
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    getcfs(key,
+        filename,
+        filter=1)
    
+      Caches the *filtered* file `filename` with `key` until the file is
+modified.    		
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        cfs = {}
+    
    
+       
+    
+        cfs_lock = thread.allocate_lock()
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Function Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    getcfs(key,
+        filename,
+        filter=1)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Caches the *filtered* file `filename` with `key` until the file is
+modified.
+
+:param key: the cache key
+:param filename: the file to cache
+:param filter: is the function used for filtering. Normally `filename` is a
+    .py file and `filter` is a function that bytecode compiles the file.
+    In this way the bytecode compiled file is cached. (Default = None)
+
+This is used on Google App Engine since pyc files cannot be saved.
+
+
    
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.cfs-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.cfs-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.cfs-pysrc.html
@@ -0,0 +1,177 @@
+
+
+
+
+  web2py.gluon.cfs
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module cfs
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.cfs
    
+
    + 1  #!/usr/bin/env python 
+ 2  # -*- coding: utf-8 -*- 
+ 3   
+ 4  """ 
+ 5  This file is part of the web2py Web Framework 
+ 6  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+ 7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+ 8   
+ 9  Functions required to execute app components 
+10  ============================================ 
+11   
+12  FOR INTERNAL USE ONLY 
+13  """ 
+14   
+15  import os 
+16  import stat 
+17  import thread 
+18  from fileutils import read_file 
+19   
+20  cfs = {}  # for speed-up 
+21  cfs_lock = thread.allocate_lock()  # and thread safety 
+22   
+23   
+
    24 -def getcfs(key, filename, filter=None): 
+
    25      """ 
+26      Caches the *filtered* file `filename` with `key` until the file is 
+27      modified. 
+28   
+29      :param key: the cache key 
+30      :param filename: the file to cache 
+31      :param filter: is the function used for filtering. Normally `filename` is a 
+32          .py file and `filter` is a function that bytecode compiles the file. 
+33          In this way the bytecode compiled file is cached. (Default = None) 
+34   
+35      This is used on Google App Engine since pyc files cannot be saved. 
+36      """ 
+37      t = os.stat(filename)[stat.ST_MTIME] 
+38      cfs_lock.acquire() 
+39      item = cfs.get(key, None) 
+40      cfs_lock.release() 
+41      if item and item[0] == t: 
+42          return item[1] 
+43      if not filter: 
+44          data = read_file(filename) 
+45      else: 
+46          data = filter() 
+47      cfs_lock.acquire() 
+48      cfs[key] = (t, data) 
+49      cfs_lock.release() 
+50      return data 
+
    51   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:04 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.compileapp-module.html
Index: applications/examples/static/epydoc/web2py.gluon.compileapp-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.compileapp-module.html
@@ -0,0 +1,678 @@
+
+
+
+
+  web2py.gluon.compileapp
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module compileapp
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module compileapp
    source code

    
+This file is part of the web2py Web Framework Copyrighted by Massimo 
+  Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)
+  
    Functions required to execute app components
    
+    FOR INTERNAL USE ONLY

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        mybuiltin
    
+      NOTE could simple use a dict and populate it, NOTE not sure if 
+        this changes things though if monkey patching import.....
+    
    
+       
+    
+        LoadFactory
    
+      Attention: this helper is new and experimental
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    local_import_aux(name,
+        force=True,
+        app='welcome')
    
+      In apps, instead of importing a local module
+(in applications/app/modules) with::
+
+   import a.b.c as d
+
+you should do::
+
+   d = local_import('a.b.c')
+
+or (to force a reload):
+
+   d = local_import('a.b.c', reload=True)
+
+This prevents conflict between applications and un-necessary execs.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    build_environment(request,
+        response,
+        session,
+        store_current=True)
    
+      Build the environment dictionary into which web2py files are 
+      executed.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    save_pyc(filename)
    
+      Bytecode compiles the file `filename`    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    read_pyc(filename)
    
+      Read the code inside a bytecode compiled file if the MAGIC number 
+      is compatible    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    compile_views(folder)
    
+      Compiles all the views in the application specified by 
+      `folder`    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    compile_models(folder)
    
+      Compiles all the models in the application specified by 
+      `folder`    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    compile_controllers(folder)
    
+      Compiles all the controllers in the application specified by 
+      `folder`    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    run_models_in(environment)
    
+      Runs all models (in the app specified by the current folder) It 
+      tries pre-compiled models first before compiling them.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    run_controller_in(controller,
+        function,
+        environment)
    
+      Runs the controller.function() (for the app specified by the 
+      current folder).    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    run_view_in(environment)
    
+      Executes the view for the requested action.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    remove_compiled_application(folder)
    
+      Deletes the folder `compiled` containing the compiled 
+      application.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    compile_application(folder)
    
+      Compiles all models, views, controller for the application in 
+      `folder`.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    test()
    
+      Example:    		
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        logger = logging.getLogger("web2py")
+    
    
+       
+    
+        is_gae = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        is_jython = True
+    
    
+       
+    
+        TEST_CODE = '\ndef _TEST():\n    import doctest, sys, cStringI...
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Function Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    local_import_aux(name,
+        force=True,
+        app='welcome')
+  
    
+      		source code 
+    
    
+  
+  
    +
+In apps, instead of importing a local module
+(in applications/app/modules) with::
+
+   import a.b.c as d
+
+you should do::
+
+   d = local_import('a.b.c')
+
+or (to force a reload):
+
+   d = local_import('a.b.c', reload=True)
+
+This prevents conflict between applications and un-necessary execs.
+It can be used to import any module, including regular Python modules.
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    read_pyc(filename)
+  
    
+      		source code 
+    
    
+  
+  
    Read the code inside a bytecode compiled file if the MAGIC number is 
+  compatible
    
+  :returns: a code object
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    run_controller_in(controller,
+        function,
+        environment)
+  
    
+      		source code 
+    
    
+  
+  Runs the controller.function() (for the app specified by the current 
+  folder). It tries pre-compiled controller_function.pyc first before 
+  compiling it.
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    run_view_in(environment)
+  
    
+      		source code 
+    
    
+  
+  Executes the view for the requested action. The view is the one 
+  specified in `response.view` or determined by the url or 
+  `view/generic.extension` It tries the pre-compiled 
+  views_controller_function.pyc before compiling it.
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    test()
+  
    
+      		source code 
+    
    
+  
+  Example:
+
    +   >>> import traceback, types
+   >>> environment={'x':1}
+   >>> open('a.py', 'w').write('print 1/x')
+   >>> save_pyc('a.py')
+   >>> os.unlink('a.py')
+   >>> if type(read_pyc('a.pyc'))==types.CodeType: print 'code'
+   code
+   >>> exec read_pyc('a.pyc') in environment
+   1
+
    
+  
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Variables Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    TEST_CODE
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +'''
+def _TEST():
+    import doctest, sys, cStringIO, types, cgi, gluon.fileutils
+    if not gluon.fileutils.check_credentials(request):
+        raise HTTP(401, web2py_error=\'invalid credentials\')
+    stdout = sys.stdout
+    html = \'<h2>Testing controller "%s.py" ... done.</h2><br/>\\n\' \\
+\
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.compileapp-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.compileapp-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.compileapp-pysrc.html
@@ -0,0 +1,814 @@
+
+
+
+
+  web2py.gluon.compileapp
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module compileapp
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.compileapp
    
+
    +  1  #!/usr/bin/env python 
+  2  # -*- coding: utf-8 -*- 
+  3   
+  4  """ 
+  5  This file is part of the web2py Web Framework 
+  6  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+  7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+  8   
+  9  Functions required to execute app components 
+ 10  ============================================ 
+ 11   
+ 12  FOR INTERNAL USE ONLY 
+ 13  """ 
+ 14   
+ 15  import re 
+ 16  import sys 
+ 17  import fnmatch 
+ 18  import os 
+ 19  import copy 
+ 20  import random 
+ 21  import __builtin__ 
+ 22  from storage import Storage, List 
+ 23  from template import parse_template 
+ 24  from restricted import restricted, compile2 
+ 25  from fileutils import mktree, listdir, read_file, write_file 
+ 26  from myregex import regex_expose 
+ 27  from languages import translator 
+ 28  from dal import BaseAdapter, SQLDB, SQLField, DAL, Field 
+ 29  from sqlhtml import SQLFORM, SQLTABLE 
+ 30  from cache import Cache 
+ 31  from globals import current 
+ 32  import settings 
+ 33  from cfs import getcfs 
+ 34  import html 
+ 35  import validators 
+ 36  from http import HTTP, redirect 
+ 37  import marshal 
+ 38  import shutil 
+ 39  import imp 
+ 40  import logging 
+ 41  logger = logging.getLogger("web2py") 
+ 42  import rewrite 
+ 43   
+ 44  try: 
+ 45      import py_compile 
+ 46  except: 
+ 47      logger.warning('unable to import py_compile') 
+ 48   
+ 49  is_gae = settings.global_settings.web2py_runtime_gae 
+ 50  is_jython = settings.global_settings.is_jython = 'java' in sys.platform.lower() or hasattr(sys, 'JYTHON_JAR') or str(sys.copyright).find('Jython') > 0 
+ 51   
+ 52  TEST_CODE = \ 
+ 53      r""" 
+ 54  def _TEST(): 
+ 55      import doctest, sys, cStringIO, types, cgi, gluon.fileutils 
+ 56      if not gluon.fileutils.check_credentials(request): 
+ 57          raise HTTP(401, web2py_error='invalid credentials') 
+ 58      stdout = sys.stdout 
+ 59      html = '<h2>Testing controller "%s.py" ... done.</h2><br/>\n' \ 
+ 60          % request.controller 
+ 61      for key in sorted([key for key in globals() if not key in __symbols__+['_TEST']]): 
+ 62          eval_key = eval(key) 
+ 63          if type(eval_key) == types.FunctionType: 
+ 64              number_doctests = sum([len(ds.examples) for ds in doctest.DocTestFinder().find(eval_key)]) 
+ 65              if number_doctests>0: 
+ 66                  sys.stdout = cStringIO.StringIO() 
+ 67                  name = '%s/controllers/%s.py in %s.__doc__' \ 
+ 68                      % (request.folder, request.controller, key) 
+ 69                  doctest.run_docstring_examples(eval_key, 
+ 70                      globals(), False, name=name) 
+ 71                  report = sys.stdout.getvalue().strip() 
+ 72                  if report: 
+ 73                      pf = 'failed' 
+ 74                  else: 
+ 75                      pf = 'passed' 
+ 76                  html += '<h3 class="%s">Function %s [%s]</h3>\n' \ 
+ 77                      % (pf, key, pf) 
+ 78                  if report: 
+ 79                      html += CODE(report, language='web2py', \ 
+ 80                          link='/examples/global/vars/').xml() 
+ 81                  html += '<br/>\n' 
+ 82              else: 
+ 83                  html += \ 
+ 84                      '<h3 class="nodoctests">Function %s [no doctests]</h3><br/>\n' \ 
+ 85                      % (key) 
+ 86      response._vars = html 
+ 87      sys.stdout = stdout 
+ 88  _TEST() 
+ 89  """ 
+ 90   
+
     91 -class mybuiltin(object): 
+
     92      """ 
+ 93      NOTE could simple use a dict and populate it,  
+ 94      NOTE not sure if this changes things though if monkey patching import..... 
+ 95      """ 
+ 96      #__builtins__ 
+
     97 -    def __getitem__(self, key): 
+
     98          try: 
+ 99              return getattr(__builtin__, key) 
+100          except AttributeError: 
+101              raise KeyError, key             
+
    102 -    def __setitem__(self, key, value): 
+
    103          setattr(self, key, value) 
+
    104   
+
    105 -class LoadFactory(object): 
+
    106      """ 
+107      Attention: this helper is new and experimental 
+108      """ 
+
    109 -    def __init__(self,environment): 
+
    110          self.environment = environment 
+
    111 -    def __call__(self, c=None, f='index', args=[], vars={}, 
+112                   extension=None, target=None,ajax=False,ajax_trap=False, 
+113                   url=None,user_signature=False, content='loading...',**attr): 
+
    114          import globals 
+115          target = target or 'c'+str(random.random())[2:] 
+116          attr['_id']=target 
+117          request = self.environment['request'] 
+118          if not isinstance(vars,Storage): 
+119              vars = Storage(vars) 
+120          if '.' in f: 
+121              f, extension = f.split('.',1) 
+122          if url or ajax: 
+123              url = url or html.URL(request.application, c, f, r=request, 
+124                                    args=args, vars=vars, extension=extension, 
+125                                    user_signature=user_signature) 
+126              script = html.SCRIPT('web2py_component("%s","%s")' % (url, target), 
+127                                   _type="text/javascript") 
+128              return html.TAG[''](script, html.DIV(content,**attr)) 
+129          else: 
+130              if not isinstance(args,(list,tuple)): 
+131                  args = [args] 
+132              c = c or request.controller 
+133   
+134              other_request = Storage() 
+135              for key, value in request.items(): 
+136                  other_request[key] = value 
+137              other_request['env'] = Storage() 
+138              for key, value in request.env.items(): 
+139                  other_request.env['key'] = value  
+140              other_request.controller = c 
+141              other_request.function = f 
+142              other_request.extension = extension or request.extension 
+143              other_request.args = List(args) 
+144              other_request.vars = vars 
+145              other_request.get_vars = vars 
+146              other_request.post_vars = Storage() 
+147              other_response = globals.Response() 
+148              other_request.env.path_info = '/' + \ 
+149                  '/'.join([request.application,c,f] + \ 
+150                               map(str, other_request.args)) 
+151              other_request.env.query_string = \ 
+152                  vars and html.URL(vars=vars).split('?')[1] or '' 
+153              other_request.env.http_web2py_component_location = \ 
+154                  request.env.path_info             
+155              other_request.cid = target 
+156              other_request.env.http_web2py_component_element = target 
+157              other_response.view = '%s/%s.%s' % (c,f, other_request.extension) 
+158              other_environment = copy.copy(self.environment) 
+159              other_response._view_environment = other_environment 
+160              other_response.generic_patterns = \ 
+161                  copy.copy(current.response.generic_patterns) 
+162              other_environment['request'] = other_request 
+163              other_environment['response'] = other_response 
+164   
+165              ## some magic here because current are thread-locals 
+166   
+167              original_request, current.request = current.request, other_request 
+168              original_response, current.response = current.response, other_response 
+169              page = run_controller_in(c, f, other_environment) 
+170              if isinstance(page, dict): 
+171                  other_response._vars = page 
+172                  for key in page: 
+173                      other_response._view_environment[key] = page[key] 
+174                  run_view_in(other_response._view_environment) 
+175                  page = other_response.body.getvalue() 
+176              current.request, current.response = original_request, original_response 
+177              js = None 
+178              if ajax_trap: 
+179                  link = html.URL(request.application, c, f, r=request, 
+180                                  args=args, vars=vars, extension=extension, 
+181                                  user_signature=user_signature) 
+182                  js = "web2py_trap_form('%s','%s');" % (link, target) 
+183              script = js and html.SCRIPT(js,_type="text/javascript") or '' 
+184              return html.TAG[''](html.DIV(html.XML(page),**attr),script) 
+
    185   
+186   
+
    187 -def local_import_aux(name, force=False, app='welcome'): 
+
    188      """ 
+189      In apps, instead of importing a local module 
+190      (in applications/app/modules) with:: 
+191   
+192         import a.b.c as d 
+193   
+194      you should do:: 
+195   
+196         d = local_import('a.b.c') 
+197   
+198      or (to force a reload): 
+199   
+200         d = local_import('a.b.c', reload=True) 
+201   
+202      This prevents conflict between applications and un-necessary execs. 
+203      It can be used to import any module, including regular Python modules. 
+204      """ 
+205      items = name.replace('/','.') 
+206      name = "applications.%s.modules.%s" % (app, items) 
+207      module = __import__(name) 
+208      for item in name.split(".")[1:]: 
+209          module = getattr(module, item) 
+210      if force: 
+211          reload(module) 
+212      return module 
+
    213   
+214   
+215  """ 
+216  OLD IMPLEMENTATION: 
+217      items = name.replace('/','.').split('.') 
+218      filename, modulepath = items[-1], os.path.join(apath,'modules',*items[:-1]) 
+219      imp.acquire_lock() 
+220      try: 
+221          file=None 
+222          (file,path,desc) = imp.find_module(filename,[modulepath]+sys.path) 
+223          if not path in sys.modules or reload: 
+224              if is_gae: 
+225                  module={} 
+226                  execfile(path,{},module) 
+227                  module=Storage(module) 
+228              else: 
+229                  module = imp.load_module(path,file,path,desc) 
+230              sys.modules[path] = module 
+231          else: 
+232              module = sys.modules[path] 
+233      except Exception, e: 
+234          module = None 
+235      if file: 
+236          file.close() 
+237      imp.release_lock() 
+238      if not module: 
+239          raise ImportError, "cannot find module %s in %s" % (filename, modulepath) 
+240      return module 
+241  """ 
+242   
+
    243 -def build_environment(request, response, session, store_current=True): 
+
    244      """ 
+245      Build the environment dictionary into which web2py files are executed. 
+246      """ 
+247   
+248      environment = {} 
+249      for key in html.__all__: 
+250          environment[key] = getattr(html, key) 
+251      for key in validators.__all__: 
+252          environment[key] = getattr(validators, key) 
+253      if not request.env: 
+254          request.env = Storage() 
+255   
+256      t = environment['T'] = translator(request) 
+257      c = environment['cache'] = Cache(request) 
+258      if store_current: 
+259          current.request = request 
+260          current.response = response 
+261          current.session = session 
+262          current.T = t 
+263          current.cache = c 
+264   
+265      global __builtins__ 
+266      if is_jython: # jython hack 
+267          __builtins__ = mybuiltin() 
+268      else: 
+269          __builtins__['__import__'] = __builtin__.__import__ 
+270      environment['__builtins__'] = __builtins__ 
+271      environment['HTTP'] = HTTP 
+272      environment['redirect'] = redirect 
+273      environment['request'] = request 
+274      environment['response'] = response 
+275      environment['session'] = session 
+276      environment['DAL'] = DAL 
+277      environment['Field'] = Field 
+278      environment['SQLDB'] = SQLDB        # for backward compatibility 
+279      environment['SQLField'] = SQLField  # for backward compatibility 
+280      environment['SQLFORM'] = SQLFORM 
+281      environment['SQLTABLE'] = SQLTABLE 
+282      environment['LOAD'] = LoadFactory(environment) 
+283      environment['local_import'] = \ 
+284          lambda name, reload=False, app=request.application:\ 
+285          local_import_aux(name,reload,app) 
+286      BaseAdapter.set_folder(os.path.join(request.folder, 'databases')) 
+287      response._view_environment = copy.copy(environment) 
+288      return environment 
+
    289   
+290   
+
    291 -def save_pyc(filename): 
+
    292      """ 
+293      Bytecode compiles the file `filename` 
+294      """ 
+295      py_compile.compile(filename) 
+
    296   
+297   
+
    298 -def read_pyc(filename): 
+
    299      """ 
+300      Read the code inside a bytecode compiled file if the MAGIC number is 
+301      compatible 
+302   
+303      :returns: a code object 
+304      """ 
+305      data = read_file(filename, 'rb') 
+306      if not is_gae and data[:4] != imp.get_magic(): 
+307          raise SystemError, 'compiled code is incompatible' 
+308      return marshal.loads(data[8:]) 
+
    309   
+310   
+
    311 -def compile_views(folder): 
+
    312      """ 
+313      Compiles all the views in the application specified by `folder` 
+314      """ 
+315   
+316      path = os.path.join(folder, 'views') 
+317      for file in listdir(path, '^[\w/]+\.\w+$'): 
+318          data = parse_template(file, path) 
+319          filename = ('views/%s.py' % file).replace('/', '_').replace('\\', '_') 
+320          filename = os.path.join(folder, 'compiled', filename) 
+321          write_file(filename, data) 
+322          save_pyc(filename) 
+323          os.unlink(filename) 
+
    324   
+325   
+
    326 -def compile_models(folder): 
+
    327      """ 
+328      Compiles all the models in the application specified by `folder` 
+329      """ 
+330   
+331      path = os.path.join(folder, 'models') 
+332      for file in listdir(path, '.+\.py$'): 
+333          data = read_file(os.path.join(path, file)) 
+334          filename = os.path.join(folder, 'compiled','models',file) 
+335          mktree(filename) 
+336          write_file(filename, data) 
+337          save_pyc(filename) 
+338          os.unlink(filename) 
+
    339   
+340   
+
    341 -def compile_controllers(folder): 
+
    342      """ 
+343      Compiles all the controllers in the application specified by `folder` 
+344      """ 
+345   
+346      path = os.path.join(folder, 'controllers') 
+347      for file in listdir(path, '.+\.py$'): 
+348          ### why is this here? save_pyc(os.path.join(path, file)) 
+349          data = read_file(os.path.join(path,file)) 
+350          exposed = regex_expose.findall(data) 
+351          for function in exposed: 
+352              command = data + "\nresponse._vars=response._caller(%s)\n" % \ 
+353                  function 
+354              filename = os.path.join(folder, 'compiled', ('controllers/' 
+355                                       + file[:-3]).replace('/', '_') 
+356                                       + '_' + function + '.py') 
+357              write_file(filename, command) 
+358              save_pyc(filename) 
+359              os.unlink(filename) 
+
    360   
+361   
+
    362 -def run_models_in(environment): 
+
    363      """ 
+364      Runs all models (in the app specified by the current folder) 
+365      It tries pre-compiled models first before compiling them. 
+366      """ 
+367   
+368      folder = environment['request'].folder 
+369      c = environment['request'].controller 
+370      f = environment['request'].function 
+371      cpath = os.path.join(folder, 'compiled') 
+372      if os.path.exists(cpath): 
+373          for model in listdir(cpath, '^models_\w+\.pyc$', 0): 
+374              restricted(read_pyc(model), environment, layer=model) 
+375          path = os.path.join(cpath, 'models') 
+376          models = listdir(path, '^\w+\.pyc$',0,sort=False) 
+377          compiled=True 
+378      else: 
+379          path = os.path.join(folder, 'models') 
+380          models = listdir(path, '^\w+\.py$',0,sort=False) 
+381          compiled=False 
+382      paths = (path, os.path.join(path,c), os.path.join(path,c,f)) 
+383      for model in models: 
+384          if not os.path.split(model)[0] in paths and c!='appadmin': 
+385              continue 
+386          elif compiled: 
+387              code = read_pyc(model) 
+388          elif is_gae: 
+389              code = getcfs(model, model, 
+390                            lambda: compile2(read_file(model), model)) 
+391          else: 
+392              code = getcfs(model, model, None) 
+393          restricted(code, environment, layer=model) 
+
    394   
+395   
+
    396 -def run_controller_in(controller, function, environment): 
+
    397      """ 
+398      Runs the controller.function() (for the app specified by 
+399      the current folder). 
+400      It tries pre-compiled controller_function.pyc first before compiling it. 
+401      """ 
+402   
+403      # if compiled should run compiled! 
+404   
+405      folder = environment['request'].folder 
+406      path = os.path.join(folder, 'compiled') 
+407      badc = 'invalid controller (%s/%s)' % (controller, function) 
+408      badf = 'invalid function (%s/%s)' % (controller, function) 
+409      if os.path.exists(path): 
+410          filename = os.path.join(path, 'controllers_%s_%s.pyc' 
+411                                   % (controller, function)) 
+412          if not os.path.exists(filename): 
+413              raise HTTP(404, 
+414                         rewrite.thread.routes.error_message % badf, 
+415                         web2py_error=badf) 
+416          restricted(read_pyc(filename), environment, layer=filename) 
+417      elif function == '_TEST': 
+418          # TESTING: adjust the path to include site packages 
+419          from settings import global_settings 
+420          from admin import abspath, add_path_first 
+421          paths = (global_settings.gluon_parent, abspath('site-packages', gluon=True),  abspath('gluon', gluon=True), '') 
+422          [add_path_first(path) for path in paths] 
+423          # TESTING END 
+424   
+425          filename = os.path.join(folder, 'controllers/%s.py' 
+426                                   % controller) 
+427          if not os.path.exists(filename): 
+428              raise HTTP(404, 
+429                         rewrite.thread.routes.error_message % badc, 
+430                         web2py_error=badc) 
+431          environment['__symbols__'] = environment.keys() 
+432          code = read_file(filename) 
+433          code += TEST_CODE 
+434          restricted(code, environment, layer=filename) 
+435      else: 
+436          filename = os.path.join(folder, 'controllers/%s.py' 
+437                                   % controller) 
+438          if not os.path.exists(filename): 
+439              raise HTTP(404, 
+440                         rewrite.thread.routes.error_message % badc, 
+441                         web2py_error=badc) 
+442          code = read_file(filename) 
+443          exposed = regex_expose.findall(code) 
+444          if not function in exposed: 
+445              raise HTTP(404, 
+446                         rewrite.thread.routes.error_message % badf, 
+447                         web2py_error=badf) 
+448          code = "%s\nresponse._vars=response._caller(%s)\n" % (code, function) 
+449          if is_gae: 
+450              layer = filename + ':' + function 
+451              code = getcfs(layer, filename,  lambda: compile2(code,layer)) 
+452          restricted(code, environment, filename) 
+453      response = environment['response'] 
+454      vars=response._vars 
+455      if response.postprocessing: 
+456          for p in response.postprocessing: 
+457              vars = p(vars) 
+458      if isinstance(vars,unicode): 
+459          vars = vars.encode('utf8') 
+460      if hasattr(vars,'xml'): 
+461          vars = vars.xml() 
+462      return vars 
+
    463   
+
    464 -def run_view_in(environment): 
+
    465      """ 
+466      Executes the view for the requested action. 
+467      The view is the one specified in `response.view` or determined by the url 
+468      or `view/generic.extension` 
+469      It tries the pre-compiled views_controller_function.pyc before compiling it. 
+470      """ 
+471   
+472      request = environment['request'] 
+473      response = environment['response'] 
+474      folder = request.folder 
+475      path = os.path.join(folder, 'compiled') 
+476      badv = 'invalid view (%s)' % response.view 
+477      patterns = response.generic_patterns or [] 
+478      regex = re.compile('|'.join(fnmatch.translate(r) for r in patterns)) 
+479      short_action =  '%(controller)s/%(function)s.%(extension)s' % request 
+480      allow_generic = patterns and regex.search(short_action) 
+481      if not isinstance(response.view, str): 
+482          ccode = parse_template(response.view, os.path.join(folder, 'views'), 
+483                                 context=environment) 
+484          restricted(ccode, environment, 'file stream') 
+485      elif os.path.exists(path): 
+486          x = response.view.replace('/', '_') 
+487          files = ['views_%s.pyc' % x] 
+488          if allow_generic: 
+489              files.append('views_generic.%s.pyc' % request.extension) 
+490          # for backward compatibility 
+491          if request.extension == 'html': 
+492              files.append('views_%s.pyc' % x[:-5]) 
+493              if allow_generic: 
+494                  files.append('views_generic.pyc') 
+495          # end backward compatibility code 
+496          for f in files: 
+497              filename = os.path.join(path,f) 
+498              if os.path.exists(filename): 
+499                  code = read_pyc(filename) 
+500                  restricted(code, environment, layer=filename) 
+501                  return 
+502          raise HTTP(404, 
+503                     rewrite.thread.routes.error_message % badv, 
+504                     web2py_error=badv) 
+505      else: 
+506          filename = os.path.join(folder, 'views', response.view) 
+507          if not os.path.exists(filename) and allow_generic: 
+508              response.view = 'generic.' + request.extension 
+509              filename = os.path.join(folder, 'views', response.view) 
+510          if not os.path.exists(filename): 
+511              raise HTTP(404, 
+512                         rewrite.thread.routes.error_message % badv, 
+513                         web2py_error=badv) 
+514          layer = filename 
+515          if is_gae: 
+516              ccode = getcfs(layer, filename, 
+517                             lambda: compile2(parse_template(response.view, 
+518                                              os.path.join(folder, 'views'), 
+519                                              context=environment),layer)) 
+520          else: 
+521              ccode = parse_template(response.view, 
+522                                     os.path.join(folder, 'views'), 
+523                                     context=environment) 
+524          restricted(ccode, environment, layer) 
+
    525   
+
    526 -def remove_compiled_application(folder): 
+
    527      """ 
+528      Deletes the folder `compiled` containing the compiled application. 
+529      """ 
+530      try: 
+531          shutil.rmtree(os.path.join(folder, 'compiled')) 
+532          path = os.path.join(folder, 'controllers') 
+533          for file in listdir(path,'.*\.pyc$',drop=False): 
+534              os.unlink(file) 
+535      except OSError: 
+536          pass 
+
    537   
+538   
+
    539 -def compile_application(folder): 
+
    540      """ 
+541      Compiles all models, views, controller for the application in `folder`. 
+542      """ 
+543      remove_compiled_application(folder) 
+544      os.mkdir(os.path.join(folder, 'compiled')) 
+545      compile_models(folder) 
+546      compile_controllers(folder) 
+547      compile_views(folder) 
+
    548   
+549   
+
    550 -def test(): 
+
    551      """ 
+552      Example:: 
+553   
+554          >>> import traceback, types 
+555          >>> environment={'x':1} 
+556          >>> open('a.py', 'w').write('print 1/x') 
+557          >>> save_pyc('a.py') 
+558          >>> os.unlink('a.py') 
+559          >>> if type(read_pyc('a.pyc'))==types.CodeType: print 'code' 
+560          code 
+561          >>> exec read_pyc('a.pyc') in environment 
+562          1 
+563      """ 
+564   
+565      return 
+
    566   
+567   
+568  if __name__ == '__main__': 
+569      import doctest 
+570      doctest.testmod() 
+571   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:08 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.compileapp.LoadFactory-class.html
Index: applications/examples/static/epydoc/web2py.gluon.compileapp.LoadFactory-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.compileapp.LoadFactory-class.html
@@ -0,0 +1,275 @@
+
+
+
+
+  web2py.gluon.compileapp.LoadFactory
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module compileapp ::
+        Class LoadFactory
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class LoadFactory
    source code

    
+
    +object --+
+         |
+        LoadFactory
+
    
+
+
    
+Attention: this helper is new and experimental

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        environment)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        c=1,
+        f='index',
+        args=[],
+        vars={},
+        extension=1,
+        target=1,
+        ajax=True,
+        ajax_trap=True,
+        url=1,
+        user_signature=True,
+        content='loading...',
+        **attr)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        environment)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.compileapp.mybuiltin-class.html
Index: applications/examples/static/epydoc/web2py.gluon.compileapp.mybuiltin-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.compileapp.mybuiltin-class.html
@@ -0,0 +1,220 @@
+
+
+
+
+  web2py.gluon.compileapp.mybuiltin
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module compileapp ::
+        Class mybuiltin
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class mybuiltin
    source code

    
+
    +object --+
+         |
+        mybuiltin
+
    
+
+
    
+NOTE could simple use a dict and populate it, NOTE not sure if this 
+  changes things though if monkey patching import.....

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getitem__(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __setitem__(self,
+        key,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.contenttype-module.html
Index: applications/examples/static/epydoc/web2py.gluon.contenttype-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.contenttype-module.html
@@ -0,0 +1,236 @@
+
+
+
+
+  web2py.gluon.contenttype
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module contenttype
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module contenttype
    source code

    
+
    This file is part of the web2py Web Framework Copyrighted by Massimo 
+  Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)
    
+  CONTENT_TYPE dictionary created against freedesktop.org' shared mime 
+  info database version 0.70.

    
+
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    contenttype(filename,
+        default='text/plain')
    
+      Returns the Content-Type string matching extension of the given 
+      filename.    		
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        CONTENT_TYPE = {'.123': 'application/vnd.lotus-1-2-3', '.3ds':...
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Variables Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    CONTENT_TYPE
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'.123': 'application/vnd.lotus-1-2-3',
+ '.3ds': 'image/x-3ds',
+ '.3g2': 'video/3gpp',
+ '.3ga': 'video/3gpp',
+ '.3gp': 'video/3gpp',
+ '.3gpp': 'video/3gpp',
+ '.602': 'application/x-t602',
+ '.669': 'audio/x-mod',
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.contenttype-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.contenttype-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.contenttype-pysrc.html
@@ -0,0 +1,840 @@
+
+
+
+
+  web2py.gluon.contenttype
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module contenttype
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.contenttype
    
+
    +  1  #!/usr/bin/env python 
+  2  # -*- coding: utf-8 -*- 
+  3   
+  4  """ 
+  5  This file is part of the web2py Web Framework 
+  6  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+  7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+  8   
+  9  CONTENT_TYPE dictionary created against freedesktop.org' shared mime info 
+ 10  database version 0.70. 
+ 11  """ 
+ 12   
+ 13  __all__ = ['contenttype'] 
+ 14   
+ 15  CONTENT_TYPE = { 
+ 16      '.load': 'text/html', 
+ 17      '.123': 'application/vnd.lotus-1-2-3', 
+ 18      '.3ds': 'image/x-3ds', 
+ 19      '.3g2': 'video/3gpp', 
+ 20      '.3ga': 'video/3gpp', 
+ 21      '.3gp': 'video/3gpp', 
+ 22      '.3gpp': 'video/3gpp', 
+ 23      '.602': 'application/x-t602', 
+ 24      '.669': 'audio/x-mod', 
+ 25      '.7z': 'application/x-7z-compressed', 
+ 26      '.a': 'application/x-archive', 
+ 27      '.aac': 'audio/mp4', 
+ 28      '.abw': 'application/x-abiword', 
+ 29      '.abw.crashed': 'application/x-abiword', 
+ 30      '.abw.gz': 'application/x-abiword', 
+ 31      '.ac3': 'audio/ac3', 
+ 32      '.ace': 'application/x-ace', 
+ 33      '.adb': 'text/x-adasrc', 
+ 34      '.ads': 'text/x-adasrc', 
+ 35      '.afm': 'application/x-font-afm', 
+ 36      '.ag': 'image/x-applix-graphics', 
+ 37      '.ai': 'application/illustrator', 
+ 38      '.aif': 'audio/x-aiff', 
+ 39      '.aifc': 'audio/x-aiff', 
+ 40      '.aiff': 'audio/x-aiff', 
+ 41      '.al': 'application/x-perl', 
+ 42      '.alz': 'application/x-alz', 
+ 43      '.amr': 'audio/amr', 
+ 44      '.ani': 'application/x-navi-animation', 
+ 45      '.anim[1-9j]': 'video/x-anim', 
+ 46      '.anx': 'application/annodex', 
+ 47      '.ape': 'audio/x-ape', 
+ 48      '.arj': 'application/x-arj', 
+ 49      '.arw': 'image/x-sony-arw', 
+ 50      '.as': 'application/x-applix-spreadsheet', 
+ 51      '.asc': 'text/plain', 
+ 52      '.asf': 'video/x-ms-asf', 
+ 53      '.asp': 'application/x-asp', 
+ 54      '.ass': 'text/x-ssa', 
+ 55      '.asx': 'audio/x-ms-asx', 
+ 56      '.atom': 'application/atom+xml', 
+ 57      '.au': 'audio/basic', 
+ 58      '.avi': 'video/x-msvideo', 
+ 59      '.aw': 'application/x-applix-word', 
+ 60      '.awb': 'audio/amr-wb', 
+ 61      '.awk': 'application/x-awk', 
+ 62      '.axa': 'audio/annodex', 
+ 63      '.axv': 'video/annodex', 
+ 64      '.bak': 'application/x-trash', 
+ 65      '.bcpio': 'application/x-bcpio', 
+ 66      '.bdf': 'application/x-font-bdf', 
+ 67      '.bib': 'text/x-bibtex', 
+ 68      '.bin': 'application/octet-stream', 
+ 69      '.blend': 'application/x-blender', 
+ 70      '.blender': 'application/x-blender', 
+ 71      '.bmp': 'image/bmp', 
+ 72      '.bz': 'application/x-bzip', 
+ 73      '.bz2': 'application/x-bzip', 
+ 74      '.c': 'text/x-csrc', 
+ 75      '.c++': 'text/x-c++src', 
+ 76      '.cab': 'application/vnd.ms-cab-compressed', 
+ 77      '.cb7': 'application/x-cb7', 
+ 78      '.cbr': 'application/x-cbr', 
+ 79      '.cbt': 'application/x-cbt', 
+ 80      '.cbz': 'application/x-cbz', 
+ 81      '.cc': 'text/x-c++src', 
+ 82      '.cdf': 'application/x-netcdf', 
+ 83      '.cdr': 'application/vnd.corel-draw', 
+ 84      '.cer': 'application/x-x509-ca-cert', 
+ 85      '.cert': 'application/x-x509-ca-cert', 
+ 86      '.cgm': 'image/cgm', 
+ 87      '.chm': 'application/x-chm', 
+ 88      '.chrt': 'application/x-kchart', 
+ 89      '.class': 'application/x-java', 
+ 90      '.cls': 'text/x-tex', 
+ 91      '.cmake': 'text/x-cmake', 
+ 92      '.cpio': 'application/x-cpio', 
+ 93      '.cpio.gz': 'application/x-cpio-compressed', 
+ 94      '.cpp': 'text/x-c++src', 
+ 95      '.cr2': 'image/x-canon-cr2', 
+ 96      '.crt': 'application/x-x509-ca-cert', 
+ 97      '.crw': 'image/x-canon-crw', 
+ 98      '.cs': 'text/x-csharp', 
+ 99      '.csh': 'application/x-csh', 
+100      '.css': 'text/css', 
+101      '.cssl': 'text/css', 
+102      '.csv': 'text/csv', 
+103      '.cue': 'application/x-cue', 
+104      '.cur': 'image/x-win-bitmap', 
+105      '.cxx': 'text/x-c++src', 
+106      '.d': 'text/x-dsrc', 
+107      '.dar': 'application/x-dar', 
+108      '.dbf': 'application/x-dbf', 
+109      '.dc': 'application/x-dc-rom', 
+110      '.dcl': 'text/x-dcl', 
+111      '.dcm': 'application/dicom', 
+112      '.dcr': 'image/x-kodak-dcr', 
+113      '.dds': 'image/x-dds', 
+114      '.deb': 'application/x-deb', 
+115      '.der': 'application/x-x509-ca-cert', 
+116      '.desktop': 'application/x-desktop', 
+117      '.dia': 'application/x-dia-diagram', 
+118      '.diff': 'text/x-patch', 
+119      '.divx': 'video/x-msvideo', 
+120      '.djv': 'image/vnd.djvu', 
+121      '.djvu': 'image/vnd.djvu', 
+122      '.dng': 'image/x-adobe-dng', 
+123      '.doc': 'application/msword', 
+124      '.docbook': 'application/docbook+xml', 
+125      '.docm': 'application/vnd.openxmlformats-officedocument.wordprocessingml.document', 
+126      '.docx': 'application/vnd.openxmlformats-officedocument.wordprocessingml.document', 
+127      '.dot': 'text/vnd.graphviz', 
+128      '.dsl': 'text/x-dsl', 
+129      '.dtd': 'application/xml-dtd', 
+130      '.dtx': 'text/x-tex', 
+131      '.dv': 'video/dv', 
+132      '.dvi': 'application/x-dvi', 
+133      '.dvi.bz2': 'application/x-bzdvi', 
+134      '.dvi.gz': 'application/x-gzdvi', 
+135      '.dwg': 'image/vnd.dwg', 
+136      '.dxf': 'image/vnd.dxf', 
+137      '.e': 'text/x-eiffel', 
+138      '.egon': 'application/x-egon', 
+139      '.eif': 'text/x-eiffel', 
+140      '.el': 'text/x-emacs-lisp', 
+141      '.emf': 'image/x-emf', 
+142      '.emp': 'application/vnd.emusic-emusic_package', 
+143      '.ent': 'application/xml-external-parsed-entity', 
+144      '.eps': 'image/x-eps', 
+145      '.eps.bz2': 'image/x-bzeps', 
+146      '.eps.gz': 'image/x-gzeps', 
+147      '.epsf': 'image/x-eps', 
+148      '.epsf.bz2': 'image/x-bzeps', 
+149      '.epsf.gz': 'image/x-gzeps', 
+150      '.epsi': 'image/x-eps', 
+151      '.epsi.bz2': 'image/x-bzeps', 
+152      '.epsi.gz': 'image/x-gzeps', 
+153      '.epub': 'application/epub+zip', 
+154      '.erl': 'text/x-erlang', 
+155      '.es': 'application/ecmascript', 
+156      '.etheme': 'application/x-e-theme', 
+157      '.etx': 'text/x-setext', 
+158      '.exe': 'application/x-ms-dos-executable', 
+159      '.exr': 'image/x-exr', 
+160      '.ez': 'application/andrew-inset', 
+161      '.f': 'text/x-fortran', 
+162      '.f90': 'text/x-fortran', 
+163      '.f95': 'text/x-fortran', 
+164      '.fb2': 'application/x-fictionbook+xml', 
+165      '.fig': 'image/x-xfig', 
+166      '.fits': 'image/fits', 
+167      '.fl': 'application/x-fluid', 
+168      '.flac': 'audio/x-flac', 
+169      '.flc': 'video/x-flic', 
+170      '.fli': 'video/x-flic', 
+171      '.flv': 'video/x-flv', 
+172      '.flw': 'application/x-kivio', 
+173      '.fo': 'text/x-xslfo', 
+174      '.for': 'text/x-fortran', 
+175      '.g3': 'image/fax-g3', 
+176      '.gb': 'application/x-gameboy-rom', 
+177      '.gba': 'application/x-gba-rom', 
+178      '.gcrd': 'text/directory', 
+179      '.ged': 'application/x-gedcom', 
+180      '.gedcom': 'application/x-gedcom', 
+181      '.gen': 'application/x-genesis-rom', 
+182      '.gf': 'application/x-tex-gf', 
+183      '.gg': 'application/x-sms-rom', 
+184      '.gif': 'image/gif', 
+185      '.glade': 'application/x-glade', 
+186      '.gmo': 'application/x-gettext-translation', 
+187      '.gnc': 'application/x-gnucash', 
+188      '.gnd': 'application/gnunet-directory', 
+189      '.gnucash': 'application/x-gnucash', 
+190      '.gnumeric': 'application/x-gnumeric', 
+191      '.gnuplot': 'application/x-gnuplot', 
+192      '.gp': 'application/x-gnuplot', 
+193      '.gpg': 'application/pgp-encrypted', 
+194      '.gplt': 'application/x-gnuplot', 
+195      '.gra': 'application/x-graphite', 
+196      '.gsf': 'application/x-font-type1', 
+197      '.gsm': 'audio/x-gsm', 
+198      '.gtar': 'application/x-tar', 
+199      '.gv': 'text/vnd.graphviz', 
+200      '.gvp': 'text/x-google-video-pointer', 
+201      '.gz': 'application/x-gzip', 
+202      '.h': 'text/x-chdr', 
+203      '.h++': 'text/x-c++hdr', 
+204      '.hdf': 'application/x-hdf', 
+205      '.hh': 'text/x-c++hdr', 
+206      '.hp': 'text/x-c++hdr', 
+207      '.hpgl': 'application/vnd.hp-hpgl', 
+208      '.hpp': 'text/x-c++hdr', 
+209      '.hs': 'text/x-haskell', 
+210      '.htm': 'text/html', 
+211      '.html': 'text/html', 
+212      '.hwp': 'application/x-hwp', 
+213      '.hwt': 'application/x-hwt', 
+214      '.hxx': 'text/x-c++hdr', 
+215      '.ica': 'application/x-ica', 
+216      '.icb': 'image/x-tga', 
+217      '.icns': 'image/x-icns', 
+218      '.ico': 'image/vnd.microsoft.icon', 
+219      '.ics': 'text/calendar', 
+220      '.idl': 'text/x-idl', 
+221      '.ief': 'image/ief', 
+222      '.iff': 'image/x-iff', 
+223      '.ilbm': 'image/x-ilbm', 
+224      '.ime': 'text/x-imelody', 
+225      '.imy': 'text/x-imelody', 
+226      '.ins': 'text/x-tex', 
+227      '.iptables': 'text/x-iptables', 
+228      '.iso': 'application/x-cd-image', 
+229      '.iso9660': 'application/x-cd-image', 
+230      '.it': 'audio/x-it', 
+231      '.j2k': 'image/jp2', 
+232      '.jad': 'text/vnd.sun.j2me.app-descriptor', 
+233      '.jar': 'application/x-java-archive', 
+234      '.java': 'text/x-java', 
+235      '.jng': 'image/x-jng', 
+236      '.jnlp': 'application/x-java-jnlp-file', 
+237      '.jp2': 'image/jp2', 
+238      '.jpc': 'image/jp2', 
+239      '.jpe': 'image/jpeg', 
+240      '.jpeg': 'image/jpeg', 
+241      '.jpf': 'image/jp2', 
+242      '.jpg': 'image/jpeg', 
+243      '.jpr': 'application/x-jbuilder-project', 
+244      '.jpx': 'image/jp2', 
+245      '.js': 'application/javascript', 
+246      '.json': 'application/json', 
+247      '.k25': 'image/x-kodak-k25', 
+248      '.kar': 'audio/midi', 
+249      '.karbon': 'application/x-karbon', 
+250      '.kdc': 'image/x-kodak-kdc', 
+251      '.kdelnk': 'application/x-desktop', 
+252      '.kexi': 'application/x-kexiproject-sqlite3', 
+253      '.kexic': 'application/x-kexi-connectiondata', 
+254      '.kexis': 'application/x-kexiproject-shortcut', 
+255      '.kfo': 'application/x-kformula', 
+256      '.kil': 'application/x-killustrator', 
+257      '.kino': 'application/smil', 
+258      '.kml': 'application/vnd.google-earth.kml+xml', 
+259      '.kmz': 'application/vnd.google-earth.kmz', 
+260      '.kon': 'application/x-kontour', 
+261      '.kpm': 'application/x-kpovmodeler', 
+262      '.kpr': 'application/x-kpresenter', 
+263      '.kpt': 'application/x-kpresenter', 
+264      '.kra': 'application/x-krita', 
+265      '.ksp': 'application/x-kspread', 
+266      '.kud': 'application/x-kugar', 
+267      '.kwd': 'application/x-kword', 
+268      '.kwt': 'application/x-kword', 
+269      '.la': 'application/x-shared-library-la', 
+270      '.latex': 'text/x-tex', 
+271      '.ldif': 'text/x-ldif', 
+272      '.lha': 'application/x-lha', 
+273      '.lhs': 'text/x-literate-haskell', 
+274      '.lhz': 'application/x-lhz', 
+275      '.log': 'text/x-log', 
+276      '.ltx': 'text/x-tex', 
+277      '.lua': 'text/x-lua', 
+278      '.lwo': 'image/x-lwo', 
+279      '.lwob': 'image/x-lwo', 
+280      '.lws': 'image/x-lws', 
+281      '.ly': 'text/x-lilypond', 
+282      '.lyx': 'application/x-lyx', 
+283      '.lz': 'application/x-lzip', 
+284      '.lzh': 'application/x-lha', 
+285      '.lzma': 'application/x-lzma', 
+286      '.lzo': 'application/x-lzop', 
+287      '.m': 'text/x-matlab', 
+288      '.m15': 'audio/x-mod', 
+289      '.m2t': 'video/mpeg', 
+290      '.m3u': 'audio/x-mpegurl', 
+291      '.m3u8': 'audio/x-mpegurl', 
+292      '.m4': 'application/x-m4', 
+293      '.m4a': 'audio/mp4', 
+294      '.m4b': 'audio/x-m4b', 
+295      '.m4v': 'video/mp4', 
+296      '.mab': 'application/x-markaby', 
+297      '.man': 'application/x-troff-man', 
+298      '.mbox': 'application/mbox', 
+299      '.md': 'application/x-genesis-rom', 
+300      '.mdb': 'application/vnd.ms-access', 
+301      '.mdi': 'image/vnd.ms-modi', 
+302      '.me': 'text/x-troff-me', 
+303      '.med': 'audio/x-mod', 
+304      '.metalink': 'application/metalink+xml', 
+305      '.mgp': 'application/x-magicpoint', 
+306      '.mid': 'audio/midi', 
+307      '.midi': 'audio/midi', 
+308      '.mif': 'application/x-mif', 
+309      '.minipsf': 'audio/x-minipsf', 
+310      '.mka': 'audio/x-matroska', 
+311      '.mkv': 'video/x-matroska', 
+312      '.ml': 'text/x-ocaml', 
+313      '.mli': 'text/x-ocaml', 
+314      '.mm': 'text/x-troff-mm', 
+315      '.mmf': 'application/x-smaf', 
+316      '.mml': 'text/mathml', 
+317      '.mng': 'video/x-mng', 
+318      '.mo': 'application/x-gettext-translation', 
+319      '.mo3': 'audio/x-mo3', 
+320      '.moc': 'text/x-moc', 
+321      '.mod': 'audio/x-mod', 
+322      '.mof': 'text/x-mof', 
+323      '.moov': 'video/quicktime', 
+324      '.mov': 'video/quicktime', 
+325      '.movie': 'video/x-sgi-movie', 
+326      '.mp+': 'audio/x-musepack', 
+327      '.mp2': 'video/mpeg', 
+328      '.mp3': 'audio/mpeg', 
+329      '.mp4': 'video/mp4', 
+330      '.mpc': 'audio/x-musepack', 
+331      '.mpe': 'video/mpeg', 
+332      '.mpeg': 'video/mpeg', 
+333      '.mpg': 'video/mpeg', 
+334      '.mpga': 'audio/mpeg', 
+335      '.mpp': 'audio/x-musepack', 
+336      '.mrl': 'text/x-mrml', 
+337      '.mrml': 'text/x-mrml', 
+338      '.mrw': 'image/x-minolta-mrw', 
+339      '.ms': 'text/x-troff-ms', 
+340      '.msi': 'application/x-msi', 
+341      '.msod': 'image/x-msod', 
+342      '.msx': 'application/x-msx-rom', 
+343      '.mtm': 'audio/x-mod', 
+344      '.mup': 'text/x-mup', 
+345      '.mxf': 'application/mxf', 
+346      '.n64': 'application/x-n64-rom', 
+347      '.nb': 'application/mathematica', 
+348      '.nc': 'application/x-netcdf', 
+349      '.nds': 'application/x-nintendo-ds-rom', 
+350      '.nef': 'image/x-nikon-nef', 
+351      '.nes': 'application/x-nes-rom', 
+352      '.nfo': 'text/x-nfo', 
+353      '.not': 'text/x-mup', 
+354      '.nsc': 'application/x-netshow-channel', 
+355      '.nsv': 'video/x-nsv', 
+356      '.o': 'application/x-object', 
+357      '.obj': 'application/x-tgif', 
+358      '.ocl': 'text/x-ocl', 
+359      '.oda': 'application/oda', 
+360      '.odb': 'application/vnd.oasis.opendocument.database', 
+361      '.odc': 'application/vnd.oasis.opendocument.chart', 
+362      '.odf': 'application/vnd.oasis.opendocument.formula', 
+363      '.odg': 'application/vnd.oasis.opendocument.graphics', 
+364      '.odi': 'application/vnd.oasis.opendocument.image', 
+365      '.odm': 'application/vnd.oasis.opendocument.text-master', 
+366      '.odp': 'application/vnd.oasis.opendocument.presentation', 
+367      '.ods': 'application/vnd.oasis.opendocument.spreadsheet', 
+368      '.odt': 'application/vnd.oasis.opendocument.text', 
+369      '.oga': 'audio/ogg', 
+370      '.ogg': 'video/x-theora+ogg', 
+371      '.ogm': 'video/x-ogm+ogg', 
+372      '.ogv': 'video/ogg', 
+373      '.ogx': 'application/ogg', 
+374      '.old': 'application/x-trash', 
+375      '.oleo': 'application/x-oleo', 
+376      '.opml': 'text/x-opml+xml', 
+377      '.ora': 'image/openraster', 
+378      '.orf': 'image/x-olympus-orf', 
+379      '.otc': 'application/vnd.oasis.opendocument.chart-template', 
+380      '.otf': 'application/x-font-otf', 
+381      '.otg': 'application/vnd.oasis.opendocument.graphics-template', 
+382      '.oth': 'application/vnd.oasis.opendocument.text-web', 
+383      '.otp': 'application/vnd.oasis.opendocument.presentation-template', 
+384      '.ots': 'application/vnd.oasis.opendocument.spreadsheet-template', 
+385      '.ott': 'application/vnd.oasis.opendocument.text-template', 
+386      '.owl': 'application/rdf+xml', 
+387      '.oxt': 'application/vnd.openofficeorg.extension', 
+388      '.p': 'text/x-pascal', 
+389      '.p10': 'application/pkcs10', 
+390      '.p12': 'application/x-pkcs12', 
+391      '.p7b': 'application/x-pkcs7-certificates', 
+392      '.p7s': 'application/pkcs7-signature', 
+393      '.pack': 'application/x-java-pack200', 
+394      '.pak': 'application/x-pak', 
+395      '.par2': 'application/x-par2', 
+396      '.pas': 'text/x-pascal', 
+397      '.patch': 'text/x-patch', 
+398      '.pbm': 'image/x-portable-bitmap', 
+399      '.pcd': 'image/x-photo-cd', 
+400      '.pcf': 'application/x-cisco-vpn-settings', 
+401      '.pcf.gz': 'application/x-font-pcf', 
+402      '.pcf.z': 'application/x-font-pcf', 
+403      '.pcl': 'application/vnd.hp-pcl', 
+404      '.pcx': 'image/x-pcx', 
+405      '.pdb': 'chemical/x-pdb', 
+406      '.pdc': 'application/x-aportisdoc', 
+407      '.pdf': 'application/pdf', 
+408      '.pdf.bz2': 'application/x-bzpdf', 
+409      '.pdf.gz': 'application/x-gzpdf', 
+410      '.pef': 'image/x-pentax-pef', 
+411      '.pem': 'application/x-x509-ca-cert', 
+412      '.perl': 'application/x-perl', 
+413      '.pfa': 'application/x-font-type1', 
+414      '.pfb': 'application/x-font-type1', 
+415      '.pfx': 'application/x-pkcs12', 
+416      '.pgm': 'image/x-portable-graymap', 
+417      '.pgn': 'application/x-chess-pgn', 
+418      '.pgp': 'application/pgp-encrypted', 
+419      '.php': 'application/x-php', 
+420      '.php3': 'application/x-php', 
+421      '.php4': 'application/x-php', 
+422      '.pict': 'image/x-pict', 
+423      '.pict1': 'image/x-pict', 
+424      '.pict2': 'image/x-pict', 
+425      '.pickle': 'application/python-pickle', 
+426      '.pk': 'application/x-tex-pk', 
+427      '.pkipath': 'application/pkix-pkipath', 
+428      '.pkr': 'application/pgp-keys', 
+429      '.pl': 'application/x-perl', 
+430      '.pla': 'audio/x-iriver-pla', 
+431      '.pln': 'application/x-planperfect', 
+432      '.pls': 'audio/x-scpls', 
+433      '.pm': 'application/x-perl', 
+434      '.png': 'image/png', 
+435      '.pnm': 'image/x-portable-anymap', 
+436      '.pntg': 'image/x-macpaint', 
+437      '.po': 'text/x-gettext-translation', 
+438      '.por': 'application/x-spss-por', 
+439      '.pot': 'text/x-gettext-translation-template', 
+440      '.ppm': 'image/x-portable-pixmap', 
+441      '.pps': 'application/vnd.ms-powerpoint', 
+442      '.ppt': 'application/vnd.ms-powerpoint', 
+443      '.pptm': 'application/vnd.openxmlformats-officedocument.presentationml.presentation', 
+444      '.pptx': 'application/vnd.openxmlformats-officedocument.presentationml.presentation', 
+445      '.ppz': 'application/vnd.ms-powerpoint', 
+446      '.prc': 'application/x-palm-database', 
+447      '.ps': 'application/postscript', 
+448      '.ps.bz2': 'application/x-bzpostscript', 
+449      '.ps.gz': 'application/x-gzpostscript', 
+450      '.psd': 'image/vnd.adobe.photoshop', 
+451      '.psf': 'audio/x-psf', 
+452      '.psf.gz': 'application/x-gz-font-linux-psf', 
+453      '.psflib': 'audio/x-psflib', 
+454      '.psid': 'audio/prs.sid', 
+455      '.psw': 'application/x-pocket-word', 
+456      '.pw': 'application/x-pw', 
+457      '.py': 'text/x-python', 
+458      '.pyc': 'application/x-python-bytecode', 
+459      '.pyo': 'application/x-python-bytecode', 
+460      '.qif': 'image/x-quicktime', 
+461      '.qt': 'video/quicktime', 
+462      '.qtif': 'image/x-quicktime', 
+463      '.qtl': 'application/x-quicktime-media-link', 
+464      '.qtvr': 'video/quicktime', 
+465      '.ra': 'audio/vnd.rn-realaudio', 
+466      '.raf': 'image/x-fuji-raf', 
+467      '.ram': 'application/ram', 
+468      '.rar': 'application/x-rar', 
+469      '.ras': 'image/x-cmu-raster', 
+470      '.raw': 'image/x-panasonic-raw', 
+471      '.rax': 'audio/vnd.rn-realaudio', 
+472      '.rb': 'application/x-ruby', 
+473      '.rdf': 'application/rdf+xml', 
+474      '.rdfs': 'application/rdf+xml', 
+475      '.reg': 'text/x-ms-regedit', 
+476      '.rej': 'application/x-reject', 
+477      '.rgb': 'image/x-rgb', 
+478      '.rle': 'image/rle', 
+479      '.rm': 'application/vnd.rn-realmedia', 
+480      '.rmj': 'application/vnd.rn-realmedia', 
+481      '.rmm': 'application/vnd.rn-realmedia', 
+482      '.rms': 'application/vnd.rn-realmedia', 
+483      '.rmvb': 'application/vnd.rn-realmedia', 
+484      '.rmx': 'application/vnd.rn-realmedia', 
+485      '.roff': 'text/troff', 
+486      '.rp': 'image/vnd.rn-realpix', 
+487      '.rpm': 'application/x-rpm', 
+488      '.rss': 'application/rss+xml', 
+489      '.rt': 'text/vnd.rn-realtext', 
+490      '.rtf': 'application/rtf', 
+491      '.rtx': 'text/richtext', 
+492      '.rv': 'video/vnd.rn-realvideo', 
+493      '.rvx': 'video/vnd.rn-realvideo', 
+494      '.s3m': 'audio/x-s3m', 
+495      '.sam': 'application/x-amipro', 
+496      '.sami': 'application/x-sami', 
+497      '.sav': 'application/x-spss-sav', 
+498      '.scm': 'text/x-scheme', 
+499      '.sda': 'application/vnd.stardivision.draw', 
+500      '.sdc': 'application/vnd.stardivision.calc', 
+501      '.sdd': 'application/vnd.stardivision.impress', 
+502      '.sdp': 'application/sdp', 
+503      '.sds': 'application/vnd.stardivision.chart', 
+504      '.sdw': 'application/vnd.stardivision.writer', 
+505      '.sgf': 'application/x-go-sgf', 
+506      '.sgi': 'image/x-sgi', 
+507      '.sgl': 'application/vnd.stardivision.writer', 
+508      '.sgm': 'text/sgml', 
+509      '.sgml': 'text/sgml', 
+510      '.sh': 'application/x-shellscript', 
+511      '.shar': 'application/x-shar', 
+512      '.shn': 'application/x-shorten', 
+513      '.siag': 'application/x-siag', 
+514      '.sid': 'audio/prs.sid', 
+515      '.sik': 'application/x-trash', 
+516      '.sis': 'application/vnd.symbian.install', 
+517      '.sisx': 'x-epoc/x-sisx-app', 
+518      '.sit': 'application/x-stuffit', 
+519      '.siv': 'application/sieve', 
+520      '.sk': 'image/x-skencil', 
+521      '.sk1': 'image/x-skencil', 
+522      '.skr': 'application/pgp-keys', 
+523      '.slk': 'text/spreadsheet', 
+524      '.smaf': 'application/x-smaf', 
+525      '.smc': 'application/x-snes-rom', 
+526      '.smd': 'application/vnd.stardivision.mail', 
+527      '.smf': 'application/vnd.stardivision.math', 
+528      '.smi': 'application/x-sami', 
+529      '.smil': 'application/smil', 
+530      '.sml': 'application/smil', 
+531      '.sms': 'application/x-sms-rom', 
+532      '.snd': 'audio/basic', 
+533      '.so': 'application/x-sharedlib', 
+534      '.spc': 'application/x-pkcs7-certificates', 
+535      '.spd': 'application/x-font-speedo', 
+536      '.spec': 'text/x-rpm-spec', 
+537      '.spl': 'application/x-shockwave-flash', 
+538      '.spx': 'audio/x-speex', 
+539      '.sql': 'text/x-sql', 
+540      '.sr2': 'image/x-sony-sr2', 
+541      '.src': 'application/x-wais-source', 
+542      '.srf': 'image/x-sony-srf', 
+543      '.srt': 'application/x-subrip', 
+544      '.ssa': 'text/x-ssa', 
+545      '.stc': 'application/vnd.sun.xml.calc.template', 
+546      '.std': 'application/vnd.sun.xml.draw.template', 
+547      '.sti': 'application/vnd.sun.xml.impress.template', 
+548      '.stm': 'audio/x-stm', 
+549      '.stw': 'application/vnd.sun.xml.writer.template', 
+550      '.sty': 'text/x-tex', 
+551      '.sub': 'text/x-subviewer', 
+552      '.sun': 'image/x-sun-raster', 
+553      '.sv4cpio': 'application/x-sv4cpio', 
+554      '.sv4crc': 'application/x-sv4crc', 
+555      '.svg': 'image/svg+xml', 
+556      '.svgz': 'image/svg+xml-compressed', 
+557      '.swf': 'application/x-shockwave-flash', 
+558      '.sxc': 'application/vnd.sun.xml.calc', 
+559      '.sxd': 'application/vnd.sun.xml.draw', 
+560      '.sxg': 'application/vnd.sun.xml.writer.global', 
+561      '.sxi': 'application/vnd.sun.xml.impress', 
+562      '.sxm': 'application/vnd.sun.xml.math', 
+563      '.sxw': 'application/vnd.sun.xml.writer', 
+564      '.sylk': 'text/spreadsheet', 
+565      '.t': 'text/troff', 
+566      '.t2t': 'text/x-txt2tags', 
+567      '.tar': 'application/x-tar', 
+568      '.tar.bz': 'application/x-bzip-compressed-tar', 
+569      '.tar.bz2': 'application/x-bzip-compressed-tar', 
+570      '.tar.gz': 'application/x-compressed-tar', 
+571      '.tar.lzma': 'application/x-lzma-compressed-tar', 
+572      '.tar.lzo': 'application/x-tzo', 
+573      '.tar.xz': 'application/x-xz-compressed-tar', 
+574      '.tar.z': 'application/x-tarz', 
+575      '.tbz': 'application/x-bzip-compressed-tar', 
+576      '.tbz2': 'application/x-bzip-compressed-tar', 
+577      '.tcl': 'text/x-tcl', 
+578      '.tex': 'text/x-tex', 
+579      '.texi': 'text/x-texinfo', 
+580      '.texinfo': 'text/x-texinfo', 
+581      '.tga': 'image/x-tga', 
+582      '.tgz': 'application/x-compressed-tar', 
+583      '.theme': 'application/x-theme', 
+584      '.themepack': 'application/x-windows-themepack', 
+585      '.tif': 'image/tiff', 
+586      '.tiff': 'image/tiff', 
+587      '.tk': 'text/x-tcl', 
+588      '.tlz': 'application/x-lzma-compressed-tar', 
+589      '.tnef': 'application/vnd.ms-tnef', 
+590      '.tnf': 'application/vnd.ms-tnef', 
+591      '.toc': 'application/x-cdrdao-toc', 
+592      '.torrent': 'application/x-bittorrent', 
+593      '.tpic': 'image/x-tga', 
+594      '.tr': 'text/troff', 
+595      '.ts': 'application/x-linguist', 
+596      '.tsv': 'text/tab-separated-values', 
+597      '.tta': 'audio/x-tta', 
+598      '.ttc': 'application/x-font-ttf', 
+599      '.ttf': 'application/x-font-ttf', 
+600      '.ttx': 'application/x-font-ttx', 
+601      '.txt': 'text/plain', 
+602      '.txz': 'application/x-xz-compressed-tar', 
+603      '.tzo': 'application/x-tzo', 
+604      '.ufraw': 'application/x-ufraw', 
+605      '.ui': 'application/x-designer', 
+606      '.uil': 'text/x-uil', 
+607      '.ult': 'audio/x-mod', 
+608      '.uni': 'audio/x-mod', 
+609      '.uri': 'text/x-uri', 
+610      '.url': 'text/x-uri', 
+611      '.ustar': 'application/x-ustar', 
+612      '.vala': 'text/x-vala', 
+613      '.vapi': 'text/x-vala', 
+614      '.vcf': 'text/directory', 
+615      '.vcs': 'text/calendar', 
+616      '.vct': 'text/directory', 
+617      '.vda': 'image/x-tga', 
+618      '.vhd': 'text/x-vhdl', 
+619      '.vhdl': 'text/x-vhdl', 
+620      '.viv': 'video/vivo', 
+621      '.vivo': 'video/vivo', 
+622      '.vlc': 'audio/x-mpegurl', 
+623      '.vob': 'video/mpeg', 
+624      '.voc': 'audio/x-voc', 
+625      '.vor': 'application/vnd.stardivision.writer', 
+626      '.vst': 'image/x-tga', 
+627      '.wav': 'audio/x-wav', 
+628      '.wax': 'audio/x-ms-asx', 
+629      '.wb1': 'application/x-quattropro', 
+630      '.wb2': 'application/x-quattropro', 
+631      '.wb3': 'application/x-quattropro', 
+632      '.wbmp': 'image/vnd.wap.wbmp', 
+633      '.wcm': 'application/vnd.ms-works', 
+634      '.wdb': 'application/vnd.ms-works', 
+635      '.wk1': 'application/vnd.lotus-1-2-3', 
+636      '.wk3': 'application/vnd.lotus-1-2-3', 
+637      '.wk4': 'application/vnd.lotus-1-2-3', 
+638      '.wks': 'application/vnd.ms-works', 
+639      '.wma': 'audio/x-ms-wma', 
+640      '.wmf': 'image/x-wmf', 
+641      '.wml': 'text/vnd.wap.wml', 
+642      '.wmls': 'text/vnd.wap.wmlscript', 
+643      '.wmv': 'video/x-ms-wmv', 
+644      '.wmx': 'audio/x-ms-asx', 
+645      '.wp': 'application/vnd.wordperfect', 
+646      '.wp4': 'application/vnd.wordperfect', 
+647      '.wp5': 'application/vnd.wordperfect', 
+648      '.wp6': 'application/vnd.wordperfect', 
+649      '.wpd': 'application/vnd.wordperfect', 
+650      '.wpg': 'application/x-wpg', 
+651      '.wpl': 'application/vnd.ms-wpl', 
+652      '.wpp': 'application/vnd.wordperfect', 
+653      '.wps': 'application/vnd.ms-works', 
+654      '.wri': 'application/x-mswrite', 
+655      '.wrl': 'model/vrml', 
+656      '.wv': 'audio/x-wavpack', 
+657      '.wvc': 'audio/x-wavpack-correction', 
+658      '.wvp': 'audio/x-wavpack', 
+659      '.wvx': 'audio/x-ms-asx', 
+660      '.x3f': 'image/x-sigma-x3f', 
+661      '.xac': 'application/x-gnucash', 
+662      '.xbel': 'application/x-xbel', 
+663      '.xbl': 'application/xml', 
+664      '.xbm': 'image/x-xbitmap', 
+665      '.xcf': 'image/x-xcf', 
+666      '.xcf.bz2': 'image/x-compressed-xcf', 
+667      '.xcf.gz': 'image/x-compressed-xcf', 
+668      '.xhtml': 'application/xhtml+xml', 
+669      '.xi': 'audio/x-xi', 
+670      '.xla': 'application/vnd.ms-excel', 
+671      '.xlc': 'application/vnd.ms-excel', 
+672      '.xld': 'application/vnd.ms-excel', 
+673      '.xlf': 'application/x-xliff', 
+674      '.xliff': 'application/x-xliff', 
+675      '.xll': 'application/vnd.ms-excel', 
+676      '.xlm': 'application/vnd.ms-excel', 
+677      '.xls': 'application/vnd.ms-excel', 
+678      '.xlsm': 'application/vnd.openxmlformats-officedocument.spreadsheetml.sheet', 
+679      '.xlsx': 'application/vnd.openxmlformats-officedocument.spreadsheetml.sheet', 
+680      '.xlt': 'application/vnd.ms-excel', 
+681      '.xlw': 'application/vnd.ms-excel', 
+682      '.xm': 'audio/x-xm', 
+683      '.xmf': 'audio/x-xmf', 
+684      '.xmi': 'text/x-xmi', 
+685      '.xml': 'application/xml', 
+686      '.xpm': 'image/x-xpixmap', 
+687      '.xps': 'application/vnd.ms-xpsdocument', 
+688      '.xsl': 'application/xml', 
+689      '.xslfo': 'text/x-xslfo', 
+690      '.xslt': 'application/xml', 
+691      '.xspf': 'application/xspf+xml', 
+692      '.xul': 'application/vnd.mozilla.xul+xml', 
+693      '.xwd': 'image/x-xwindowdump', 
+694      '.xyz': 'chemical/x-pdb', 
+695      '.xz': 'application/x-xz', 
+696      '.w2p': 'application/w2p', 
+697      '.z': 'application/x-compress', 
+698      '.zabw': 'application/x-abiword', 
+699      '.zip': 'application/zip', 
+700      '.zoo': 'application/x-zoo', 
+701      } 
+702   
+703   
+
    704 -def contenttype(filename, default='text/plain'): 
+
    705      """ 
+706      Returns the Content-Type string matching extension of the given filename. 
+707      """ 
+708   
+709      i = filename.rfind('.') 
+710      if i>=0: 
+711          default = CONTENT_TYPE.get(filename[i:].lower(),default) 
+712          j = filename.rfind('.', 0, i) 
+713          if j>=0: 
+714              default = CONTENT_TYPE.get(filename[j:].lower(),default) 
+715      if default.startswith('text/'): 
+716          default += '; charset=utf-8' 
+717      return default 
+
    718   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:03 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.contrib.pymysql-module.html
Index: applications/examples/static/epydoc/web2py.gluon.contrib.pymysql-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.contrib.pymysql-module.html
@@ -0,0 +1,667 @@
+
+
+
+
+  web2py.gluon.contrib.pymysql
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Package contrib ::
+        Package pymysql
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Package pymysql
    source code

    
+
    PyMySQL: A pure-Python drop-in replacement for MySQLdb.
    
+  
    Copyright (c) 2010 PyMySQL contributors
    
+  
    Permission is hereby granted, free of charge, to any person obtaining 
+  a copy of this software and associated documentation files (the 
+  "Software"), to deal in the Software without restriction, 
+  including without limitation the rights to use, copy, modify, merge, 
+  publish, distribute, sublicense, and/or sell copies of the Software, and 
+  to permit persons to whom the Software is furnished to do so, subject to 
+  the following conditions:
    
+  
    The above copyright notice and this permission notice shall be 
+  included in all copies or substantial portions of the Software.
    
+  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY 
+  KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 
+  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
+  NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, 
+  DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR 
+  OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+  USE OR OTHER DEALINGS IN THE SOFTWARE.

    
+
+
    
+
          
    Version:
+        0.4.None
+      
    
+
    
+
+
+
+  
+
+  
+
    
+    
+      
+        
+        
+      
+    
    Submodules[hide private]
    
+  
    
+  
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        DBAPISet
+    
    
+       
+    
+        DataError
    
+      Exception raised for errors that are due to problems with the 
+        processed data like division by zero, numeric value out of range, 
+        etc.
+    
    
+       
+    
+        DatabaseError
    
+      Exception raised for errors that are related to the 
+        database.
+    
    
+       
+    
+        Date
    
+      date(year, month, day) --> date object
+    
    
+       
+    
+        Error
    
+      Exception that is the base class of all other error exceptions 
+        (not Warning).
+    
    
+       
+    
+        IntegrityError
    
+      Exception raised when the relational integrity of the database 
+        is affected, e.g.
+    
    
+       
+    
+        InterfaceError
    
+      Exception raised for errors that are related to the database 
+        interface rather than the database itself.
+    
    
+       
+    
+        InternalError
    
+      Exception raised when the database encounters an internal error,
+        e.g.
+    
    
+       
+    
+        NotSupportedError
    
+      Exception raised in case a method or database API was used which
+        is not supported by the database, e.g.
+    
    
+       
+    
+        OperationalError
    
+      Exception raised for errors that are related to the database's 
+        operation and not necessarily under the control of the programmer, 
+        e.g.
+    
    
+       
+    
+        ProgrammingError
    
+      Exception raised for programming errors, e.g.
+    
    
+       
+    
+        Time
    
+      time([hour[, minute[, second[, microsecond[, tzinfo]]]]]) -->
+        a time object
+    
    
+       
+    
+        Timestamp
    
+      datetime(year, month, day[, hour[, minute[, second[, 
+        microsecond[,tzinfo]]]]])
+    
    
+       
+    
+        Warning
    
+      Exception raised for important warnings like data truncations 
+        while inserting, etc.
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    Binary(x)
    
+      Return x as a binary type.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    Connect(*args,
+        **kwargs)
    
+      Connect to the database; see connections.Connection.__init__() for
+      more information.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    Connection(*args,
+        **kwargs)
    
+      Connect to the database; see connections.Connection.__init__() for
+      more information.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    DateFromTicks(ticks)
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    TimeFromTicks(ticks)
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    TimestampFromTicks(ticks)
+            
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    connect(*args,
+        **kwargs)
    
+      Connect to the database; see connections.Connection.__init__() for
+      more information.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    escape_dict(val,
+        charset)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    escape_sequence(val,
+        charset)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    escape_string(value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    get_client_info()
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    install_as_MySQLdb()
    
+      After this function is called, any application that imports 
+      MySQLdb or _mysql will unwittingly actually use    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    thread_safe()
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        BINARY = DBAPISet([249, 250, 251, 252])
+    
    
+       
+    
+        DATE = DBAPISet([10, 14])
+    
    
+       
+    
+        DATETIME = DBAPISet([12, 7])
+    
    
+       
+    
+        NULL = 'NULL'
+    
    
+       
+    
+        NUMBER = DBAPISet([0, 1, 3, 4, 5, 8, 9, 13])
+    
    
+       
+    
+        ROWID = DBAPISet([])
+    
    
+       
+    
+        STRING = DBAPISet([253, 254, 247])
+    
    
+       
+    
+        TIME = DBAPISet([11])
+    
    
+       
+    
+        TIMESTAMP = DBAPISet([12, 7])
+    
    
+       
+    
+        VERSION = (0, 4, None)
+    
    
+       
+    
+        apilevel = '2.0'
+    
    
+       
+    
+        paramstyle = 'format'
+    
    
+       
+    
+        threadsafety = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        version_info = (1, 2, 2, 'final', 0)
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.contrib.pymysql-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.contrib.pymysql-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.contrib.pymysql-pysrc.html
@@ -0,0 +1,302 @@
+
+
+
+
+  web2py.gluon.contrib.pymysql
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Package contrib ::
+        Package pymysql
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Package web2py.gluon.contrib.pymysql
    
+
    +  1  ''' 
+  2  PyMySQL: A pure-Python drop-in replacement for MySQLdb. 
+  3   
+  4  Copyright (c) 2010 PyMySQL contributors 
+  5   
+  6  Permission is hereby granted, free of charge, to any person obtaining a copy 
+  7  of this software and associated documentation files (the "Software"), to deal 
+  8  in the Software without restriction, including without limitation the rights 
+  9  to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 
+ 10  copies of the Software, and to permit persons to whom the Software is 
+ 11  furnished to do so, subject to the following conditions: 
+ 12   
+ 13  The above copyright notice and this permission notice shall be included in 
+ 14  all copies or substantial portions of the Software. 
+ 15   
+ 16  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 
+ 17  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
+ 18  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 
+ 19  AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 
+ 20  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 
+ 21  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 
+ 22  THE SOFTWARE. 
+ 23   
+ 24  ''' 
+ 25   
+ 26  VERSION = (0, 4, None) 
+ 27   
+ 28  from constants import FIELD_TYPE 
+ 29  from converters import escape_dict, escape_sequence, escape_string 
+ 30  from err import Warning, Error, InterfaceError, DataError, \ 
+ 31       DatabaseError, OperationalError, IntegrityError, InternalError, \ 
+ 32       NotSupportedError, ProgrammingError 
+ 33  from times import Date, Time, Timestamp, \ 
+ 34      DateFromTicks, TimeFromTicks, TimestampFromTicks 
+ 35   
+ 36  import sys 
+ 37   
+ 38  try: 
+ 39      frozenset 
+ 40  except NameError: 
+ 41      from sets import ImmutableSet as frozenset 
+ 42      try: 
+ 43          from sets import BaseSet as set 
+ 44      except ImportError: 
+ 45          from sets import Set as set 
+ 46   
+ 47  threadsafety = 1 
+ 48  apilevel = "2.0" 
+ 49  paramstyle = "format" 
+ 50   
+
     51 -class DBAPISet(frozenset): 
+
     52   
+ 53   
+
     54 -    def __ne__(self, other): 
+
     55          if isinstance(other, set): 
+ 56              return super(DBAPISet, self).__ne__(self, other) 
+ 57          else: 
+ 58              return other not in self 
+
     59   
+
     60 -    def __eq__(self, other): 
+
     61          if isinstance(other, frozenset): 
+ 62              return frozenset.__eq__(self, other) 
+ 63          else: 
+ 64              return other in self 
+
     65   
+
     66 -    def __hash__(self): 
+
     67          return frozenset.__hash__(self) 
+
     68   
+ 69   
+ 70  STRING    = DBAPISet([FIELD_TYPE.ENUM, FIELD_TYPE.STRING, 
+ 71                       FIELD_TYPE.VAR_STRING]) 
+ 72  BINARY    = DBAPISet([FIELD_TYPE.BLOB, FIELD_TYPE.LONG_BLOB, 
+ 73                       FIELD_TYPE.MEDIUM_BLOB, FIELD_TYPE.TINY_BLOB]) 
+ 74  NUMBER    = DBAPISet([FIELD_TYPE.DECIMAL, FIELD_TYPE.DOUBLE, FIELD_TYPE.FLOAT, 
+ 75                       FIELD_TYPE.INT24, FIELD_TYPE.LONG, FIELD_TYPE.LONGLONG, 
+ 76                       FIELD_TYPE.TINY, FIELD_TYPE.YEAR]) 
+ 77  DATE      = DBAPISet([FIELD_TYPE.DATE, FIELD_TYPE.NEWDATE]) 
+ 78  TIME      = DBAPISet([FIELD_TYPE.TIME]) 
+ 79  TIMESTAMP = DBAPISet([FIELD_TYPE.TIMESTAMP, FIELD_TYPE.DATETIME]) 
+ 80  DATETIME  = TIMESTAMP 
+ 81  ROWID     = DBAPISet() 
+ 82   
+
     83 -def Binary(x): 
+
     84      """Return x as a binary type.""" 
+ 85      return str(x) 
+
     86   
+
     87 -def Connect(*args, **kwargs): 
+
     88      """ 
+ 89      Connect to the database; see connections.Connection.__init__() for 
+ 90      more information. 
+ 91      """ 
+ 92      from connections import Connection 
+ 93      return Connection(*args, **kwargs) 
+
     94   
+
     95 -def get_client_info():  # for MySQLdb compatibility 
+
     96    return '%s.%s.%s' % VERSION 
+ 97   
+ 98  connect = Connection = Connect 
+ 99   
+100  # we include a doctored version_info here for MySQLdb compatibility 
+101  version_info = (1,2,2,"final",0) 
+102   
+103  NULL = "NULL" 
+104   
+105  __version__ = get_client_info() 
+106   
+
    107 -def thread_safe(): 
+
    108      return True # match MySQLdb.thread_safe() 
+
    109   
+
    110 -def install_as_MySQLdb(): 
+
    111      """ 
+112      After this function is called, any application that imports MySQLdb or 
+113      _mysql will unwittingly actually use  
+114      """ 
+115      sys.modules["MySQLdb"] = sys.modules["_mysql"] = sys.modules["pymysql"] 
+
    116   
+117  __all__ = [ 
+118      'BINARY', 'Binary', 'Connect', 'Connection', 'DATE', 'Date', 
+119      'Time', 'Timestamp', 'DateFromTicks', 'TimeFromTicks', 'TimestampFromTicks', 
+120      'DataError', 'DatabaseError', 'Error', 'FIELD_TYPE', 'IntegrityError', 
+121      'InterfaceError', 'InternalError', 'MySQLError', 'NULL', 'NUMBER', 
+122      'NotSupportedError', 'DBAPISet', 'OperationalError', 'ProgrammingError', 
+123      'ROWID', 'STRING', 'TIME', 'TIMESTAMP', 'Warning', 'apilevel', 'connect', 
+124      'connections', 'constants', 'converters', 'cursors', 'debug', 'escape', 
+125      'escape_dict', 'escape_sequence', 'escape_string', 'get_client_info', 
+126      'paramstyle', 'string_literal', 'threadsafety', 'version_info', 
+127   
+128      "install_as_MySQLdb", 
+129   
+130      "NULL","__version__", 
+131      ] 
+132   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:03 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.DBAPISet-class.html
Index: applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.DBAPISet-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.DBAPISet-class.html
@@ -0,0 +1,354 @@
+
+
+
+
+  web2py.gluon.contrib.pymysql.DBAPISet
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Package contrib ::
+        Package pymysql ::
+        Class DBAPISet
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class DBAPISet
    source code

    
+
    +object --+    
+         |    
+ frozenset --+
+             |
+            DBAPISet
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __eq__(self,
+        other)
    
+      x==y    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __hash__(self)
    
+      hash(x)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __ne__(self,
+        other)
    
+      x!=y    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from frozenset:
+      __and__,
+      __cmp__,
+      __contains__,
+      __ge__,
+      __getattribute__,
+      __gt__,
+      __iter__,
+      __le__,
+      __len__,
+      __lt__,
+      __new__,
+      __or__,
+      __rand__,
+      __reduce__,
+      __repr__,
+      __ror__,
+      __rsub__,
+      __rxor__,
+      __sub__,
+      __xor__,
+      copy,
+      difference,
+      intersection,
+      issubset,
+      issuperset,
+      symmetric_difference,
+      union
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __init__,
+      __reduce_ex__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __eq__(self,
+        other)
+    
    (Equality operator)
+  
    
+      		source code 
+    
    
+  
+  x==y
+  
    
+    
    Overrides:
+      frozenset.__eq__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __hash__(self)
+    
    (Hashing function)
+  
    
+      		source code 
+    
    
+  
+  hash(x)
+  
    
+    
    Overrides:
+      frozenset.__hash__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __ne__(self,
+        other)
+  
    
+      		source code 
+    
    
+  
+  x!=y
+  
    
+    
    Overrides:
+      frozenset.__ne__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.constants-module.html
Index: applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.constants-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.constants-module.html
@@ -0,0 +1,141 @@
+
+
+
+
+  web2py.gluon.contrib.pymysql.constants
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Package contrib ::
+        Package pymysql ::
+        Package constants
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Package constants
    source code

    
+
+
+
+
+  
+
+  
+
    
+    
+      
+        
+        
+      
+    
    Submodules[hide private]
    
+  
    
+  
    
+
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.constants-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.constants-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.constants-pysrc.html
@@ -0,0 +1,125 @@
+
+
+
+
+  web2py.gluon.contrib.pymysql.constants
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Package contrib ::
+        Package pymysql ::
+        Package constants
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Package web2py.gluon.contrib.pymysql.constants
    
+
    +1   
+2   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:05 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html
Index: applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-module.html
@@ -0,0 +1,343 @@
+
+
+
+
+  web2py.gluon.contrib.pymysql.constants.FIELD_TYPE
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Package contrib ::
+        Package pymysql ::
+        Package constants ::
+        Module FIELD_TYPE
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module FIELD_TYPE
    source code

    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        BIT = 16
+    
    
+       
+    
+        BLOB = 252
+    
    
+       
+    
+        CHAR = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        DATE = 10
+    
    
+       
+    
+        DATETIME = 12
+    
    
+       
+    
+        DECIMAL = 0
+    
    
+       
+    
+        DOUBLE = 5
+    
    
+       
+    
+        ENUM = 247
+    
    
+       
+    
+        FLOAT = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        GEOMETRY = 255
+    
    
+       
+    
+        INT24 = 9
+    
    
+       
+    
+        INTERVAL = 247
+    
    
+       
+    
+        LONG = 3
+    
    
+       
+    
+        LONGLONG = 8
+    
    
+       
+    
+        LONG_BLOB = 251
+    
    
+       
+    
+        MEDIUM_BLOB = 250
+    
    
+       
+    
+        NEWDATE = 14
+    
    
+       
+    
+        NEWDECIMAL = 246
+    
    
+       
+    
+        NULL = 6
+    
    
+       
+    
+        SET = 248
+    
    
+       
+    
+        SHORT = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        STRING = 254
+    
    
+       
+    
+        TIME = 11
+    
    
+       
+    
+        TIMESTAMP = 7
+    
    
+       
+    
+        TINY = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        TINY_BLOB = 249
+    
    
+       
+    
+        VARCHAR = 15
+    
    
+       
+    
+        VAR_STRING = 253
+    
    
+       
+    
+        YEAR = 13
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.constants.FIELD_TYPE-pysrc.html
@@ -0,0 +1,165 @@
+
+
+
+
+  web2py.gluon.contrib.pymysql.constants.FIELD_TYPE
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Package contrib ::
+        Package pymysql ::
+        Package constants ::
+        Module FIELD_TYPE
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.contrib.pymysql.constants.FIELD_TYPE
    
+
    + 1   
+ 2   
+ 3  DECIMAL = 0 
+ 4  TINY = 1 
+ 5  SHORT = 2 
+ 6  LONG = 3 
+ 7  FLOAT = 4 
+ 8  DOUBLE = 5 
+ 9  NULL = 6 
+10  TIMESTAMP = 7 
+11  LONGLONG = 8 
+12  INT24 = 9 
+13  DATE = 10 
+14  TIME = 11 
+15  DATETIME = 12 
+16  YEAR = 13 
+17  NEWDATE = 14 
+18  VARCHAR = 15 
+19  BIT = 16 
+20  NEWDECIMAL = 246 
+21  ENUM = 247 
+22  SET = 248 
+23  TINY_BLOB = 249 
+24  MEDIUM_BLOB = 250 
+25  LONG_BLOB = 251 
+26  BLOB = 252 
+27  VAR_STRING = 253 
+28  STRING = 254 
+29  GEOMETRY = 255 
+30   
+31  CHAR = TINY 
+32  INTERVAL = ENUM 
+33   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:09 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.converters-module.html
Index: applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.converters-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.converters-module.html
@@ -0,0 +1,1039 @@
+
+
+
+
+  web2py.gluon.contrib.pymysql.converters
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Package contrib ::
+        Package pymysql ::
+        Module converters
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module converters
    source code

    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    convert_bit(connection,
+        field,
+        b)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    convert_characters(connection,
+        field,
+        data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    convert_date(connection,
+        field,
+        obj)
    
+      Returns a DATE column as a date object:    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    convert_datetime(connection,
+        field,
+        obj)
    
+      Returns a DATETIME or TIMESTAMP column value as a datetime 
+      object:    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    convert_decimal(connection,
+        field,
+        data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    convert_float(connection,
+        field,
+        data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    convert_int(connection,
+        field,
+        data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    convert_long(connection,
+        field,
+        data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    convert_mysql_timestamp(connection,
+        field,
+        timestamp)
    
+      Convert a MySQL TIMESTAMP to a Timestamp object.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    convert_set(s)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    convert_time(connection,
+        field,
+        obj)
    
+      Returns a TIME column as a time object:    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    convert_timedelta(connection,
+        field,
+        obj)
    
+      Returns a TIME column as a timedelta object:    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    escape_None(value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    escape_bool(value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    escape_date(obj)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    escape_datetime(obj)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    escape_decimal(obj)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    escape_dict(val,
+        charset)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    escape_float(value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    escape_int(value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    escape_item(val,
+        charset)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    escape_long(value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    escape_object(value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    escape_sequence(val,
+        charset)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    escape_set(val,
+        charset)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    escape_string(value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    escape_struct_time(obj)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    escape_time(obj)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    escape_timedelta(obj)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    escape_unicode(value)
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        ESCAPE_MAP = {'\x00': '\\0', '\n': '\\n', '\r': '\\r', '\x1a':...
+    
    
+       
+    
+        ESCAPE_REGEX = re.compile(r'[\x00\n\r\x1a\'"\\]')
+    
    
+       
+    
+        conversions = {0: <function convert_decimal at 0xd3ccf8>, 1: <...
+    
    
+       
+    
+        decoders = {0: <function convert_decimal at 0xd3ccf8>, 1: <fun...
+    
    
+       
+    
+        encoders = {<type 'bool'>: <function escape_bool at 0xd3c2a8>,...
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Function Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    convert_date(connection,
+        field,
+        obj)
+  
    
+      		source code 
+    
    
+  
+  Returns a DATE column as a date object:
+
    +>>> date_or_None('2007-02-26')
+datetime.date(2007, 2, 26)
    
+  Illegal values are returned as None:
+
    +>>> date_or_None('2007-02-31') is None
+True
+>>> date_or_None('0000-00-00') is None
+True
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    convert_datetime(connection,
+        field,
+        obj)
+  
    
+      		source code 
+    
    
+  
+  Returns a DATETIME or TIMESTAMP column value as a datetime object:
+
    +>>> datetime_or_None('2007-02-25 23:06:20')
+datetime.datetime(2007, 2, 25, 23, 6, 20)
+>>> datetime_or_None('2007-02-25T23:06:20')
+datetime.datetime(2007, 2, 25, 23, 6, 20)
    
+  Illegal values are returned as None:
+
    +>>> datetime_or_None('2007-02-31T23:06:20') is None
+True
+>>> datetime_or_None('0000-00-00 00:00:00') is None
+True
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    convert_mysql_timestamp(connection,
+        field,
+        timestamp)
+  
    
+      		source code 
+    
    
+  
+  
    Convert a MySQL TIMESTAMP to a Timestamp object.
    
+  MySQL >= 4.1 returns TIMESTAMP in the same format as DATETIME:
+
    +>>> mysql_timestamp_converter('2007-02-25 22:32:17')
+datetime.datetime(2007, 2, 25, 22, 32, 17)
    
+  MySQL < 4.1 uses a big string of numbers:
+
    +>>> mysql_timestamp_converter('20070225223217')
+datetime.datetime(2007, 2, 25, 22, 32, 17)
    
+  Illegal values are returned as None:
+
    +>>> mysql_timestamp_converter('2007-02-31 22:32:17') is None
+True
+>>> mysql_timestamp_converter('00000000000000') is None
+True
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    convert_time(connection,
+        field,
+        obj)
+  
    
+      		source code 
+    
    
+  
+  Returns a TIME column as a time object:
+
    +>>> time_or_None('15:06:17')
+datetime.time(15, 6, 17)
    
+  Illegal values are returned as None:
+
    +>>> time_or_None('-25:06:17') is None
+True
+>>> time_or_None('random crap') is None
+True
    
+  
    Note that MySQL always returns TIME columns as (+|-)HH:MM:SS, but can 
+  accept values as (+|-)DD HH:MM:SS. The latter format will not be parsed 
+  correctly by this function.
    
+  Also note that MySQL's TIME column corresponds more closely to 
+  Python's timedelta and not time. However if you want TIME columns to be 
+  treated as time-of-day and not a time offset, then you can use set this 
+  function as the converter for FIELD_TYPE.TIME.
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    convert_timedelta(connection,
+        field,
+        obj)
+  
    
+      		source code 
+    
    
+  
+  Returns a TIME column as a timedelta object:
+
    +>>> timedelta_or_None('25:06:17')
+datetime.timedelta(1, 3977)
+>>> timedelta_or_None('-25:06:17')
+datetime.timedelta(-2, 83177)
    
+  Illegal values are returned as None:
+
    +>>> timedelta_or_None('random crap') is None
+True
    
+  Note that MySQL always returns TIME columns as (+|-)HH:MM:SS, but can 
+  accept values as (+|-)DD HH:MM:SS. The latter format will not be parsed 
+  correctly by this function.
+  
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Variables Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    ESCAPE_MAP
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'\x00': '\\0',
+ '''
+''': '\\n',
+ '\r': '\\r',
+ '\x1a': '\\Z',
+ '"': '\\"',
+ '\'': '\\\'',
+ '\\': '\\\\'}
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    conversions
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{0: <function convert_decimal at 0xd3ccf8>,
+ 1: <function convert_int at 0xd3cb90>,
+ 2: <function convert_int at 0xd3cb90>,
+ 3: <function convert_long at 0xd3cc08>,
+ 4: <function convert_float at 0xd3cc80>,
+ 5: <function convert_float at 0xd3cc80>,
+ 7: <function convert_mysql_timestamp at 0xd3c9b0>,
+ 8: <function convert_long at 0xd3cc08>,
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    decoders
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{0: <function convert_decimal at 0xd3ccf8>,
+ 1: <function convert_int at 0xd3cb90>,
+ 2: <function convert_int at 0xd3cb90>,
+ 3: <function convert_long at 0xd3cc08>,
+ 4: <function convert_float at 0xd3cc80>,
+ 5: <function convert_float at 0xd3cc80>,
+ 7: <function convert_mysql_timestamp at 0xd3c9b0>,
+ 8: <function convert_long at 0xd3cc08>,
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    encoders
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{<type 'bool'>: <function escape_bool at 0xd3c2a8>,
+ <type 'float'>: <function escape_float at 0xd3c398>,
+ <type 'int'>: <function escape_object at 0xd3c320>,
+ <type 'list'>: <function escape_sequence at 0xd34c80>,
+ <type 'long'>: <function escape_object at 0xd3c320>,
+ <type 'dict'>: <function escape_dict at 0xd34a28>,
+ <type 'NoneType'>: <function escape_None at 0xd3c500>,
+ <type 'set'>: <function escape_sequence at 0xd34c80>,
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.converters-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.converters-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.converters-pysrc.html
@@ -0,0 +1,481 @@
+
+
+
+
+  web2py.gluon.contrib.pymysql.converters
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Package contrib ::
+        Package pymysql ::
+        Module converters
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.contrib.pymysql.converters
    
+
    +  1  import re 
+  2  import datetime 
+  3  import time 
+  4   
+  5  from constants import FIELD_TYPE, FLAG 
+  6  from charset import charset_by_id 
+  7   
+  8  try: 
+  9      set 
+ 10  except NameError: 
+ 11      try: 
+ 12          from sets import BaseSet as set 
+ 13      except ImportError: 
+ 14          from sets import Set as set 
+ 15   
+ 16  ESCAPE_REGEX = re.compile(r"[\0\n\r\032\'\"\\]") 
+ 17  ESCAPE_MAP = {'\0': '\\0', '\n': '\\n', '\r': '\\r', '\032': '\\Z', 
+ 18                '\'': '\\\'', '"': '\\"', '\\': '\\\\'} 
+ 19   
+
     20 -def escape_item(val, charset): 
+
     21      if type(val) in [tuple, list, set]: 
+ 22          return escape_sequence(val, charset) 
+ 23      if type(val) is dict: 
+ 24          return escape_dict(val, charset) 
+ 25      if hasattr(val, "decode") and not isinstance(val, unicode): 
+ 26          # deal with py3k bytes 
+ 27          val = val.decode(charset) 
+ 28      encoder = encoders[type(val)] 
+ 29      val = encoder(val) 
+ 30      if type(val) is str: 
+ 31          return val 
+ 32      val = val.encode(charset) 
+ 33      return val 
+
     34   
+
     35 -def escape_dict(val, charset): 
+
     36      n = {} 
+ 37      for k, v in val.items(): 
+ 38          quoted = escape_item(v, charset) 
+ 39          n[k] = quoted 
+ 40      return n 
+
     41   
+
     42 -def escape_sequence(val, charset): 
+
     43      n = [] 
+ 44      for item in val: 
+ 45          quoted = escape_item(item, charset) 
+ 46          n.append(quoted) 
+ 47      return tuple(n) 
+
     48   
+
     49 -def escape_set(val, charset): 
+
     50      val = map(lambda x: escape_item(x, charset), val) 
+ 51      return ','.join(val) 
+
     52   
+
     53 -def escape_bool(value): 
+
     54      return str(int(value)) 
+
     55   
+
     56 -def escape_object(value): 
+
     57      return str(value) 
+
     58   
+ 59  escape_int = escape_long = escape_object 
+ 60   
+
     61 -def escape_float(value): 
+
     62      return ('%.15g' % value) 
+
     63   
+
     64 -def escape_string(value): 
+
     65      return ("'%s'" % ESCAPE_REGEX.sub( 
+ 66              lambda match: ESCAPE_MAP.get(match.group(0)), value)) 
+
     67   
+
     68 -def escape_unicode(value): 
+
     69      return escape_string(value) 
+
     70   
+
     71 -def escape_None(value): 
+
     72      return 'NULL' 
+
     73   
+
     74 -def escape_timedelta(obj): 
+
     75      seconds = int(obj.seconds) % 60 
+ 76      minutes = int(obj.seconds // 60) % 60 
+ 77      hours = int(obj.seconds // 3600) % 24 + int(obj.days) * 24 
+ 78      return escape_string('%02d:%02d:%02d' % (hours, minutes, seconds)) 
+
     79   
+
     80 -def escape_time(obj): 
+
     81      s = "%02d:%02d:%02d" % (int(obj.hour), int(obj.minute), 
+ 82                              int(obj.second)) 
+ 83      if obj.microsecond: 
+ 84          s += ".%f" % obj.microsecond 
+ 85   
+ 86      return escape_string(s) 
+
     87   
+
     88 -def escape_datetime(obj): 
+
     89      return escape_string(obj.strftime("%Y-%m-%d %H:%M:%S")) 
+
     90   
+
     91 -def escape_date(obj): 
+
     92      return escape_string(obj.strftime("%Y-%m-%d")) 
+
     93   
+
     94 -def escape_struct_time(obj): 
+
     95      return escape_datetime(datetime.datetime(*obj[:6])) 
+
     96   
+
     97 -def convert_datetime(connection, field, obj): 
+
     98      """Returns a DATETIME or TIMESTAMP column value as a datetime object: 
+ 99   
+100        >>> datetime_or_None('2007-02-25 23:06:20') 
+101        datetime.datetime(2007, 2, 25, 23, 6, 20) 
+102        >>> datetime_or_None('2007-02-25T23:06:20') 
+103        datetime.datetime(2007, 2, 25, 23, 6, 20) 
+104   
+105      Illegal values are returned as None: 
+106   
+107        >>> datetime_or_None('2007-02-31T23:06:20') is None 
+108        True 
+109        >>> datetime_or_None('0000-00-00 00:00:00') is None 
+110        True 
+111   
+112      """ 
+113      if not isinstance(obj, unicode): 
+114          obj = obj.decode(connection.charset) 
+115      if ' ' in obj: 
+116          sep = ' ' 
+117      elif 'T' in obj: 
+118          sep = 'T' 
+119      else: 
+120          return convert_date(connection, field, obj) 
+121   
+122      try: 
+123          ymd, hms = obj.split(sep, 1) 
+124          return datetime.datetime(*[ int(x) for x in ymd.split('-')+hms.split(':') ]) 
+125      except ValueError: 
+126          return convert_date(connection, field, obj) 
+
    127   
+
    128 -def convert_timedelta(connection, field, obj): 
+
    129      """Returns a TIME column as a timedelta object: 
+130   
+131        >>> timedelta_or_None('25:06:17') 
+132        datetime.timedelta(1, 3977) 
+133        >>> timedelta_or_None('-25:06:17') 
+134        datetime.timedelta(-2, 83177) 
+135   
+136      Illegal values are returned as None: 
+137   
+138        >>> timedelta_or_None('random crap') is None 
+139        True 
+140   
+141      Note that MySQL always returns TIME columns as (+|-)HH:MM:SS, but 
+142      can accept values as (+|-)DD HH:MM:SS. The latter format will not 
+143      be parsed correctly by this function. 
+144      """ 
+145      from math import modf 
+146      try: 
+147          if not isinstance(obj, unicode): 
+148              obj = obj.decode(connection.charset) 
+149          hours, minutes, seconds = tuple([int(x) for x in obj.split(':')]) 
+150          tdelta = datetime.timedelta( 
+151              hours = int(hours), 
+152              minutes = int(minutes), 
+153              seconds = int(seconds), 
+154              microseconds = int(modf(float(seconds))[0]*1000000), 
+155              ) 
+156          return tdelta 
+157      except ValueError: 
+158          return None 
+
    159   
+
    160 -def convert_time(connection, field, obj): 
+
    161      """Returns a TIME column as a time object: 
+162   
+163        >>> time_or_None('15:06:17') 
+164        datetime.time(15, 6, 17) 
+165   
+166      Illegal values are returned as None: 
+167   
+168        >>> time_or_None('-25:06:17') is None 
+169        True 
+170        >>> time_or_None('random crap') is None 
+171        True 
+172   
+173      Note that MySQL always returns TIME columns as (+|-)HH:MM:SS, but 
+174      can accept values as (+|-)DD HH:MM:SS. The latter format will not 
+175      be parsed correctly by this function. 
+176   
+177      Also note that MySQL's TIME column corresponds more closely to 
+178      Python's timedelta and not time. However if you want TIME columns 
+179      to be treated as time-of-day and not a time offset, then you can 
+180      use set this function as the converter for FIELD_TYPE.TIME. 
+181      """ 
+182      from math import modf 
+183      try: 
+184          hour, minute, second = obj.split(':') 
+185          return datetime.time(hour=int(hour), minute=int(minute), 
+186                               second=int(second), 
+187                               microsecond=int(modf(float(second))[0]*1000000)) 
+188      except ValueError: 
+189          return None 
+
    190   
+
    191 -def convert_date(connection, field, obj): 
+
    192      """Returns a DATE column as a date object: 
+193   
+194        >>> date_or_None('2007-02-26') 
+195        datetime.date(2007, 2, 26) 
+196   
+197      Illegal values are returned as None: 
+198   
+199        >>> date_or_None('2007-02-31') is None 
+200        True 
+201        >>> date_or_None('0000-00-00') is None 
+202        True 
+203   
+204      """ 
+205      try: 
+206          if not isinstance(obj, unicode): 
+207              obj = obj.decode(connection.charset) 
+208          return datetime.date(*[ int(x) for x in obj.split('-', 2) ]) 
+209      except ValueError: 
+210          return None 
+
    211   
+
    212 -def convert_mysql_timestamp(connection, field, timestamp): 
+
    213      """Convert a MySQL TIMESTAMP to a Timestamp object. 
+214   
+215      MySQL >= 4.1 returns TIMESTAMP in the same format as DATETIME: 
+216   
+217        >>> mysql_timestamp_converter('2007-02-25 22:32:17') 
+218        datetime.datetime(2007, 2, 25, 22, 32, 17) 
+219   
+220      MySQL < 4.1 uses a big string of numbers: 
+221   
+222        >>> mysql_timestamp_converter('20070225223217') 
+223        datetime.datetime(2007, 2, 25, 22, 32, 17) 
+224   
+225      Illegal values are returned as None: 
+226   
+227        >>> mysql_timestamp_converter('2007-02-31 22:32:17') is None 
+228        True 
+229        >>> mysql_timestamp_converter('00000000000000') is None 
+230        True 
+231   
+232      """ 
+233      if not isinstance(timestamp, unicode): 
+234          timestamp = timestamp.decode(connection.charset) 
+235   
+236      if timestamp[4] == '-': 
+237          return convert_datetime(connection, field, timestamp) 
+238      timestamp += "0"*(14-len(timestamp)) # padding 
+239      year, month, day, hour, minute, second = \ 
+240          int(timestamp[:4]), int(timestamp[4:6]), int(timestamp[6:8]), \ 
+241          int(timestamp[8:10]), int(timestamp[10:12]), int(timestamp[12:14]) 
+242      try: 
+243          return datetime.datetime(year, month, day, hour, minute, second) 
+244      except ValueError: 
+245          return None 
+
    246   
+
    247 -def convert_set(s): 
+
    248      return set(s.split(",")) 
+
    249   
+
    250 -def convert_bit(connection, field, b): 
+
    251      #b = "\x00" * (8 - len(b)) + b # pad w/ zeroes 
+252      #return struct.unpack(">Q", b)[0] 
+253      # 
+254      # the snippet above is right, but MySQLdb doesn't process bits, 
+255      # so we shouldn't either 
+256      return b 
+
    257   
+
    258 -def convert_characters(connection, field, data): 
+
    259      field_charset = charset_by_id(field.charsetnr).name 
+260      if field.flags & FLAG.SET: 
+261          return convert_set(data.decode(field_charset)) 
+262      if field.flags & FLAG.BINARY: 
+263          return data 
+264   
+265      if connection.use_unicode: 
+266          data = data.decode(field_charset) 
+267      elif connection.charset != field_charset: 
+268          data = data.decode(field_charset) 
+269          data = data.encode(connection.charset) 
+270      else: 
+271          data = data.decode(connection.charset) 
+272      return data 
+
    273   
+
    274 -def convert_int(connection, field, data): 
+
    275      return int(data) 
+
    276   
+
    277 -def convert_long(connection, field, data): 
+
    278      return long(data) 
+
    279   
+
    280 -def convert_float(connection, field, data): 
+
    281      return float(data) 
+
    282   
+283  encoders = { 
+284          bool: escape_bool, 
+285          int: escape_int, 
+286          long: escape_long, 
+287          float: escape_float, 
+288          str: escape_string, 
+289          unicode: escape_unicode, 
+290          tuple: escape_sequence, 
+291          list:escape_sequence, 
+292          set:escape_sequence, 
+293          dict:escape_dict, 
+294          type(None):escape_None, 
+295          datetime.date: escape_date, 
+296          datetime.datetime : escape_datetime, 
+297          datetime.timedelta : escape_timedelta, 
+298          datetime.time : escape_time, 
+299          time.struct_time : escape_struct_time, 
+300          } 
+301   
+302  decoders = { 
+303          FIELD_TYPE.BIT: convert_bit, 
+304          FIELD_TYPE.TINY: convert_int, 
+305          FIELD_TYPE.SHORT: convert_int, 
+306          FIELD_TYPE.LONG: convert_long, 
+307          FIELD_TYPE.FLOAT: convert_float, 
+308          FIELD_TYPE.DOUBLE: convert_float, 
+309          FIELD_TYPE.DECIMAL: convert_float, 
+310          FIELD_TYPE.NEWDECIMAL: convert_float, 
+311          FIELD_TYPE.LONGLONG: convert_long, 
+312          FIELD_TYPE.INT24: convert_int, 
+313          FIELD_TYPE.YEAR: convert_int, 
+314          FIELD_TYPE.TIMESTAMP: convert_mysql_timestamp, 
+315          FIELD_TYPE.DATETIME: convert_datetime, 
+316          FIELD_TYPE.TIME: convert_timedelta, 
+317          FIELD_TYPE.DATE: convert_date, 
+318          FIELD_TYPE.SET: convert_set, 
+319          FIELD_TYPE.BLOB: convert_characters, 
+320          FIELD_TYPE.TINY_BLOB: convert_characters, 
+321          FIELD_TYPE.MEDIUM_BLOB: convert_characters, 
+322          FIELD_TYPE.LONG_BLOB: convert_characters, 
+323          FIELD_TYPE.STRING: convert_characters, 
+324          FIELD_TYPE.VAR_STRING: convert_characters, 
+325          FIELD_TYPE.VARCHAR: convert_characters, 
+326          #FIELD_TYPE.BLOB: str, 
+327          #FIELD_TYPE.STRING: str, 
+328          #FIELD_TYPE.VAR_STRING: str, 
+329          #FIELD_TYPE.VARCHAR: str 
+330          } 
+331  conversions = decoders  # for MySQLdb compatibility 
+332   
+333  try: 
+334      # python version > 2.3 
+335      from decimal import Decimal 
+
    336 -    def convert_decimal(connection, field, data): 
+
    337          return Decimal(data) 
+
    338      decoders[FIELD_TYPE.DECIMAL] = convert_decimal 
+339      decoders[FIELD_TYPE.NEWDECIMAL] = convert_decimal 
+340   
+
    341 -    def escape_decimal(obj): 
+
    342          return unicode(obj) 
+
    343      encoders[Decimal] = escape_decimal 
+344   
+345  except ImportError: 
+346      pass 
+347   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:03 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.DataError-class.html
Index: applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.DataError-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.DataError-class.html
@@ -0,0 +1,209 @@
+
+
+
+
+  web2py.gluon.contrib.pymysql.err.DataError
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Package contrib ::
+        Package pymysql ::
+        Module err ::
+        Class DataError
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class DataError


    
+
    +              object --+                    
+                       |                    
+exceptions.BaseException --+                
+                           |                
+        exceptions.Exception --+            
+                               |            
+                      MySQLError --+        
+                                   |        
+                               Error --+    
+                                       |    
+                           DatabaseError --+
+                                           |
+                                          DataError
+
    
+
+
    
+Exception raised for errors that are due to problems with the 
+  processed data like division by zero, numeric value out of range, 
+  etc.

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.Exception:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.DatabaseError-class.html
Index: applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.DatabaseError-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.DatabaseError-class.html
@@ -0,0 +1,215 @@
+
+
+
+
+  web2py.gluon.contrib.pymysql.err.DatabaseError
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Package contrib ::
+        Package pymysql ::
+        Module err ::
+        Class DatabaseError
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class DatabaseError


    
+
    +              object --+                
+                       |                
+exceptions.BaseException --+            
+                           |            
+        exceptions.Exception --+        
+                               |        
+                      MySQLError --+    
+                                   |    
+                               Error --+
+                                       |
+                                      DatabaseError
+
    
+
+
    Known Subclasses:
    
+
    
+    DataError,
+    IntegrityError,
+    InternalError,
+    NotSupportedError,
+    OperationalError,
+    ProgrammingError
+
    
+
+
    
+Exception raised for errors that are related to the database.

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.Exception:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.Error-class.html
Index: applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.Error-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.Error-class.html
@@ -0,0 +1,210 @@
+
+
+
+
+  web2py.gluon.contrib.pymysql.err.Error
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Package contrib ::
+        Package pymysql ::
+        Module err ::
+        Class Error
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Error


    
+
    +              object --+            
+                       |            
+exceptions.BaseException --+        
+                           |        
+        exceptions.Exception --+    
+                               |    
+                      MySQLError --+
+                                   |
+                                  Error
+
    
+
+
    Known Subclasses:
    
+
    
+    DatabaseError,
+    InterfaceError
+
    
+
+
    
+Exception that is the base class of all other error exceptions (not 
+  Warning).

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.Exception:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.IntegrityError-class.html
Index: applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.IntegrityError-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.IntegrityError-class.html
@@ -0,0 +1,208 @@
+
+
+
+
+  web2py.gluon.contrib.pymysql.err.IntegrityError
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Package contrib ::
+        Package pymysql ::
+        Module err ::
+        Class IntegrityError
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IntegrityError


    
+
    +              object --+                    
+                       |                    
+exceptions.BaseException --+                
+                           |                
+        exceptions.Exception --+            
+                               |            
+                      MySQLError --+        
+                                   |        
+                               Error --+    
+                                       |    
+                           DatabaseError --+
+                                           |
+                                          IntegrityError
+
    
+
+
    
+Exception raised when the relational integrity of the database is 
+  affected, e.g. a foreign key check fails, duplicate key, etc.

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.Exception:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.InterfaceError-class.html
Index: applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.InterfaceError-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.InterfaceError-class.html
@@ -0,0 +1,206 @@
+
+
+
+
+  web2py.gluon.contrib.pymysql.err.InterfaceError
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Package contrib ::
+        Package pymysql ::
+        Module err ::
+        Class InterfaceError
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class InterfaceError


    
+
    +              object --+                
+                       |                
+exceptions.BaseException --+            
+                           |            
+        exceptions.Exception --+        
+                               |        
+                      MySQLError --+    
+                                   |    
+                               Error --+
+                                       |
+                                      InterfaceError
+
    
+
+
    
+Exception raised for errors that are related to the database interface
+  rather than the database itself.

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.Exception:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.InternalError-class.html
Index: applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.InternalError-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.InternalError-class.html
@@ -0,0 +1,208 @@
+
+
+
+
+  web2py.gluon.contrib.pymysql.err.InternalError
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Package contrib ::
+        Package pymysql ::
+        Module err ::
+        Class InternalError
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class InternalError


    
+
    +              object --+                    
+                       |                    
+exceptions.BaseException --+                
+                           |                
+        exceptions.Exception --+            
+                               |            
+                      MySQLError --+        
+                                   |        
+                               Error --+    
+                                       |    
+                           DatabaseError --+
+                                           |
+                                          InternalError
+
    
+
+
    
+Exception raised when the database encounters an internal error, e.g. 
+  the cursor is not valid anymore, the transaction is out of sync, etc.

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.Exception:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.NotSupportedError-class.html
Index: applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.NotSupportedError-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.NotSupportedError-class.html
@@ -0,0 +1,210 @@
+
+
+
+
+  web2py.gluon.contrib.pymysql.err.NotSupportedError
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Package contrib ::
+        Package pymysql ::
+        Module err ::
+        Class NotSupportedError
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class NotSupportedError


    
+
    +              object --+                    
+                       |                    
+exceptions.BaseException --+                
+                           |                
+        exceptions.Exception --+            
+                               |            
+                      MySQLError --+        
+                                   |        
+                               Error --+    
+                                       |    
+                           DatabaseError --+
+                                           |
+                                          NotSupportedError
+
    
+
+
    
+Exception raised in case a method or database API was used which is 
+  not supported by the database, e.g. requesting a .rollback() on a 
+  connection that does not support transaction or has transactions turned 
+  off.

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.Exception:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.OperationalError-class.html
Index: applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.OperationalError-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.OperationalError-class.html
@@ -0,0 +1,211 @@
+
+
+
+
+  web2py.gluon.contrib.pymysql.err.OperationalError
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Package contrib ::
+        Package pymysql ::
+        Module err ::
+        Class OperationalError
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class OperationalError


    
+
    +              object --+                    
+                       |                    
+exceptions.BaseException --+                
+                           |                
+        exceptions.Exception --+            
+                               |            
+                      MySQLError --+        
+                                   |        
+                               Error --+    
+                                       |    
+                           DatabaseError --+
+                                           |
+                                          OperationalError
+
    
+
+
    
+Exception raised for errors that are related to the database's 
+  operation and not necessarily under the control of the programmer, e.g. 
+  an unexpected disconnect occurs, the data source name is not found, a 
+  transaction could not be processed, a memory allocation error occurred 
+  during processing, etc.

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.Exception:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.ProgrammingError-class.html
Index: applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.ProgrammingError-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.ProgrammingError-class.html
@@ -0,0 +1,209 @@
+
+
+
+
+  web2py.gluon.contrib.pymysql.err.ProgrammingError
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Package contrib ::
+        Package pymysql ::
+        Module err ::
+        Class ProgrammingError
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class ProgrammingError


    
+
    +              object --+                    
+                       |                    
+exceptions.BaseException --+                
+                           |                
+        exceptions.Exception --+            
+                               |            
+                      MySQLError --+        
+                                   |        
+                               Error --+    
+                                       |    
+                           DatabaseError --+
+                                           |
+                                          ProgrammingError
+
    
+
+
    
+Exception raised for programming errors, e.g. table not found or 
+  already exists, syntax error in the SQL statement, wrong number of 
+  parameters specified, etc.

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.Exception:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.Warning-class.html
Index: applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.Warning-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.contrib.pymysql.err.Warning-class.html
@@ -0,0 +1,212 @@
+
+
+
+
+  web2py.gluon.contrib.pymysql.err.Warning
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Package contrib ::
+        Package pymysql ::
+        Module err ::
+        Class Warning
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Warning


    
+
    +              object --+            
+                       |            
+exceptions.BaseException --+        
+                           |        
+        exceptions.Exception --+    
+                               |    
+              exceptions.Warning --+
+                                   |
+              object --+           |
+                       |           |
+exceptions.BaseException --+       |
+                           |       |
+        exceptions.Exception --+   |
+                               |   |
+                      MySQLError --+
+                                   |
+                                  Warning
+
    
+
+
    
+Exception raised for important warnings like data truncations while 
+  inserting, etc.

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.Warning:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.custom_import-module.html
Index: applications/examples/static/epydoc/web2py.gluon.custom_import-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.custom_import-module.html
@@ -0,0 +1,352 @@
+
+
+
+
+  web2py.gluon.custom_import
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module custom_import
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module custom_import
    source code

    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        _BaseImporter
    
+      The base importer.
+    
    
+       
+    
+        _DateTrackerImporter
    
+      An importer tracking the date of the module files and reloading 
+        them when they have changed.
+    
    
+       
+    
+        _Web2pyImporter
    
+      The standard web2py importer.
+    
    
+       
+    
+        _Web2pyDateTrackerImporter
    
+      Like _Web2pyImporter but using a _DateTrackerImporter.
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    custom_import_install(web2py_path)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    is_tracking_changes()
    
+      Returns:
+      True: neo_importer is tracking changes made to Python source 
+      files.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    track_changes(track=True)
    
+      Tell neo_importer to start/stop tracking changes made to Python 
+      modules.    		
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        _web2py_importer = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        _web2py_date_tracker_importer = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        _web2py_path = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        _is_tracking_changes = True
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Function Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    is_tracking_changes()
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Returns:
    
+        
    True: neo_importer is tracking changes made to Python source 
+          files. False: neo_import does not reload Python modules.
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    track_changes(track=True)
+  
    
+      		source code 
+    
    
+  
+  Tell neo_importer to start/stop tracking changes made to Python 
+  modules.
+  
    
+    
    Parameters:
    
+    
      
+        
    • track - True: Start tracking changes. False: Stop tracking 
+          changes.
      • 
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.custom_import-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.custom_import-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.custom_import-pysrc.html
@@ -0,0 +1,942 @@
+
+
+
+
+  web2py.gluon.custom_import
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module custom_import
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.custom_import
    
+
    +  1  #!/usr/bin/env python 
+  2  # -*- coding: utf-8 -*- 
+  3   
+  4  import __builtin__ 
+  5  import os 
+  6  import re 
+  7  import sys 
+  8  import threading 
+  9   
+ 10  # Install the new import function: 
+
     11 -def custom_import_install(web2py_path): 
+
     12          global _web2py_importer 
+ 13          global _web2py_path 
+ 14          if _web2py_importer: 
+ 15              return  # Already installed 
+ 16          _web2py_path = web2py_path 
+ 17          _web2py_importer = _Web2pyImporter(web2py_path) 
+ 18          __builtin__.__import__ = _web2py_importer 
+
     19   
+
     21      """ 
+ 22      @return: True: neo_importer is tracking changes made to Python source 
+ 23      files. False: neo_import does not reload Python modules. 
+ 24      """ 
+ 25   
+ 26      global _is_tracking_changes 
+ 27      return _is_tracking_changes 
+
     28   
+
     29 -def track_changes(track=True): 
+
     30      """ 
+ 31      Tell neo_importer to start/stop tracking changes made to Python modules. 
+ 32      @param track: True: Start tracking changes. False: Stop tracking changes. 
+ 33      """ 
+ 34   
+ 35      global _is_tracking_changes 
+ 36      global _web2py_importer 
+ 37      global _web2py_date_tracker_importer 
+ 38      assert track is True or track is False, "Boolean expected." 
+ 39      if track == _is_tracking_changes: 
+ 40          return 
+ 41      if track: 
+ 42          if not _web2py_date_tracker_importer: 
+ 43              _web2py_date_tracker_importer = \ 
+ 44                _Web2pyDateTrackerImporter(_web2py_path) 
+ 45          __builtin__.__import__ = _web2py_date_tracker_importer 
+ 46      else: 
+ 47          __builtin__.__import__ = _web2py_importer 
+ 48      _is_tracking_changes = track 
+
     49   
+ 50  _STANDARD_PYTHON_IMPORTER = __builtin__.__import__ # Keep standard importer 
+ 51  _web2py_importer = None # The standard web2py importer 
+ 52  _web2py_date_tracker_importer = None # The web2py importer with date tracking 
+ 53  _web2py_path = None # Absolute path of the web2py directory 
+ 54   
+ 55  _is_tracking_changes = False # The tracking mode 
+ 56   
+
     57 -class _BaseImporter(object): 
+
     58      """ 
+ 59      The base importer. Dispatch the import the call to the standard Python 
+ 60      importer. 
+ 61      """ 
+ 62   
+
     63 -    def begin(self): 
+
     64          """ 
+ 65          Many imports can be made for a single import statement. This method 
+ 66          help the management of this aspect. 
+ 67          """ 
+
     68   
+
     69 -    def __call__(self, name, globals={}, locals={}, fromlist=[], level=-1): 
+
     70          """ 
+ 71          The import method itself. 
+ 72          """ 
+ 73          return _STANDARD_PYTHON_IMPORTER(name, globals, locals, fromlist, 
+ 74                                           level) 
+
     75   
+
     76 -    def end(self): 
+
     77          """ 
+ 78          Needed for clean up. 
+ 79          """ 
+
     80   
+ 81   
+
     82 -class _DateTrackerImporter(_BaseImporter): 
+
     83      """ 
+ 84      An importer tracking the date of the module files and reloading them when 
+ 85      they have changed. 
+ 86      """ 
+ 87   
+ 88      _PACKAGE_PATH_SUFFIX = os.path.sep+"__init__.py" 
+ 89   
+
     90 -    def __init__(self): 
+
     91          super(_DateTrackerImporter, self).__init__() 
+ 92          self._import_dates = {} # Import dates of the files of the modules 
+ 93          # Avoid reloading cause by file modifications of reload: 
+ 94          self._tl = threading.local() 
+ 95          self._tl._modules_loaded = None 
+
     96   
+
     97 -    def begin(self): 
+
     98          self._tl._modules_loaded = set() 
+
     99   
+
    100 -    def __call__(self, name, globals={}, locals={}, fromlist=[], level=-1): 
+
    101          """ 
+102          The import method itself. 
+103          """ 
+104   
+105          call_begin_end = self._tl._modules_loaded == None 
+106          if call_begin_end: 
+107              self.begin() 
+108   
+109          try: 
+110              self._tl.globals = globals 
+111              self._tl.locals = locals 
+112              self._tl.level = level 
+113   
+114              # Check the date and reload if needed: 
+115              self._update_dates(name, fromlist) 
+116   
+117              # Try to load the module and update the dates if it works: 
+118              result = super(_DateTrackerImporter, self) \ 
+119                .__call__(name, globals, locals, fromlist, level) 
+120              # Module maybe loaded for the 1st time so we need to set the date 
+121              self._update_dates(name, fromlist) 
+122              return result 
+123          except Exception, e: 
+124              raise e  # Don't hide something that went wrong 
+125          finally: 
+126              if call_begin_end: 
+127                  self.end() 
+
    128   
+
    129 -    def _update_dates(self, name, fromlist): 
+
    130          """ 
+131          Update all the dates associated to the statement import. A single 
+132          import statement may import many modules. 
+133          """ 
+134   
+135          self._reload_check(name) 
+136          if fromlist: 
+137              for fromlist_name in fromlist: 
+138                  self._reload_check("%s.%s" % (name, fromlist_name)) 
+
    139   
+
    140 -    def _reload_check(self, name): 
+
    141          """ 
+142          Update the date associated to the module and reload the module if 
+143          the file has changed. 
+144          """ 
+145   
+146          module = sys.modules.get(name) 
+147          file = self._get_module_file(module) 
+148          if file: 
+149              date = self._import_dates.get(file) 
+150              new_date = None 
+151              reload_mod = False 
+152              mod_to_pack = False # Module turning into a package? (special case) 
+153              try: 
+154                  new_date = os.path.getmtime(file) 
+155              except: 
+156                  self._import_dates.pop(file, None)  # Clean up 
+157                  # Handle module changing in package and 
+158                  #package changing in module: 
+159                  if file.endswith(".py"): 
+160                      # Get path without file ext: 
+161                      file = os.path.splitext(file)[0] 
+162                      reload_mod = os.path.isdir(file) \ 
+163                        and os.path.isfile(file+self._PACKAGE_PATH_SUFFIX) 
+164                      mod_to_pack = reload_mod 
+165                  else: # Package turning into module? 
+166                      file += ".py" 
+167                      reload_mod = os.path.isfile(file) 
+168                  if reload_mod: 
+169                      new_date = os.path.getmtime(file) # Refresh file date 
+170              if reload_mod or not date or new_date > date: 
+171                  self._import_dates[file] = new_date 
+172              if reload_mod or (date and new_date > date): 
+173                  if module not in self._tl._modules_loaded: 
+174                      if mod_to_pack: 
+175                          # Module turning into a package: 
+176                          mod_name = module.__name__ 
+177                          del sys.modules[mod_name] # Delete the module 
+178                          # Reload the module: 
+179                          super(_DateTrackerImporter, self).__call__ \ 
+180                            (mod_name, self._tl.globals, self._tl.locals, [], 
+181                             self._tl.level) 
+182                      else: 
+183                          reload(module) 
+184                          self._tl._modules_loaded.add(module) 
+
    185   
+
    186 -    def end(self): 
+
    187          self._tl._modules_loaded = None 
+
    188   
+189      @classmethod 
+
    190 -    def _get_module_file(cls, module): 
+
    191          """ 
+192          Get the absolute path file associated to the module or None. 
+193          """ 
+194   
+195          file = getattr(module, "__file__", None) 
+196          if file: 
+197              # Make path absolute if not: 
+198              #file = os.path.join(cls.web2py_path, file) 
+199   
+200              file = os.path.splitext(file)[0]+".py" # Change .pyc for .py 
+201              if file.endswith(cls._PACKAGE_PATH_SUFFIX): 
+202                  file = os.path.dirname(file)  # Track dir for packages 
+203          return file 
+
    204   
+
    205 -class _Web2pyImporter(_BaseImporter): 
+
    206      """ 
+207      The standard web2py importer. Like the standard Python importer but it 
+208      tries to transform import statements as something like 
+209      "import applications.app_name.modules.x". If the import failed, fall back 
+210      on _BaseImporter. 
+211      """ 
+212   
+213      _RE_ESCAPED_PATH_SEP = re.escape(os.path.sep)  # os.path.sep escaped for re 
+214   
+
    215 -    def __init__(self, web2py_path): 
+
    216          """ 
+217          @param web2py_path: The absolute path of the web2py installation. 
+218          """ 
+219   
+220          global DEBUG 
+221          super(_Web2pyImporter, self).__init__() 
+222          self.web2py_path =  web2py_path 
+223          self.__web2py_path_os_path_sep = self.web2py_path+os.path.sep 
+224          self.__web2py_path_os_path_sep_len = len(self.__web2py_path_os_path_sep) 
+225          self.__RE_APP_DIR = re.compile( 
+226            self._RE_ESCAPED_PATH_SEP.join( \ 
+227            ( \ 
+228              #"^" + re.escape(web2py_path),   # Not working with Python 2.5 
+229              "^(" + "applications", 
+230              "[^", 
+231              "]+)", 
+232              "", 
+233            ) )) 
+
    234   
+
    235 -    def _matchAppDir(self, file_path): 
+
    236          """ 
+237          Does the file in a directory inside the "applications" directory? 
+238          """ 
+239   
+240          if file_path.startswith(self.__web2py_path_os_path_sep): 
+241              file_path = file_path[self.__web2py_path_os_path_sep_len:] 
+242              return self.__RE_APP_DIR.match(file_path) 
+243          return False 
+
    244   
+
    245 -    def __call__(self, name, globals={}, locals={}, fromlist=[], level=-1): 
+
    246          """ 
+247          The import method itself. 
+248          """ 
+249   
+250          self.begin() 
+251          #try: 
+252          # if not relative and not from applications: 
+253          if not name.startswith(".") and level <= 0 \ 
+254                      and not name.startswith("applications.") \ 
+255                      and isinstance(globals, dict): 
+256              # Get the name of the file do the import 
+257              caller_file_name = os.path.join(self.web2py_path, \ 
+258                                              globals.get("__file__", "")) 
+259              # Is the path in an application directory? 
+260              match_app_dir = self._matchAppDir(caller_file_name) 
+261              if match_app_dir: 
+262                  try: 
+263                      # Get the prefix to add for the import 
+264                      # (like applications.app_name.modules): 
+265                      modules_prefix = \ 
+266                          ".".join((match_app_dir.group(1). \ 
+267                          replace(os.path.sep, "."), "modules")) 
+268                      if not fromlist: 
+269                          # import like "import x" or "import x.y" 
+270                          return self.__import__dot(modules_prefix, name, 
+271                              globals, locals, fromlist, level) 
+272                      else: 
+273                          # import like "from x import a, b, ..." 
+274                          return super(_Web2pyImporter, self) \ 
+275                              .__call__(modules_prefix+"."+name, 
+276                                      globals, locals, fromlist, level) 
+277                  except ImportError: 
+278                      pass 
+279          return super(_Web2pyImporter, self).__call__(name, globals, locals, 
+280                                                      fromlist, level) 
+281          #except Exception, e: 
+282          #    raise e  # Don't hide something that went wrong 
+283          #finally: 
+284          self.end() 
+
    285   
+
    286 -    def __import__dot(self, prefix, name, globals, locals, fromlist, 
+287                        level): 
+
    288          """ 
+289          Here we will import x.y.z as many imports like: 
+290          from applications.app_name.modules import x 
+291          from applications.app_name.modules.x import y 
+292          from applications.app_name.modules.x.y import z. 
+293          x will be the module returned. 
+294          """ 
+295   
+296          result = None 
+297          for name in name.split("."): 
+298              new_mod = super(_Web2pyImporter, self).__call__(prefix, globals, 
+299                                                          locals, [name], level) 
+300              try: 
+301                  result = result or new_mod.__dict__[name] 
+302              except KeyError: 
+303                  raise ImportError() 
+304              prefix += "." + name 
+305          return result 
+
    306   
+
    307 -class _Web2pyDateTrackerImporter(_Web2pyImporter, _DateTrackerImporter): 
+
    308      """ 
+309      Like _Web2pyImporter but using a _DateTrackerImporter. 
+310      """ 
+
    311   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:05 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.custom_import._BaseImporter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.custom_import._BaseImporter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.custom_import._BaseImporter-class.html
@@ -0,0 +1,286 @@
+
+
+
+
+  web2py.gluon.custom_import._BaseImporter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module custom_import ::
+        Class _BaseImporter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class _BaseImporter
    source code

    
+
    +object --+
+         |
+        _BaseImporter
+
    
+
+
    Known Subclasses:
    
+
    
+    _DateTrackerImporter,
+    _Web2pyImporter
+
    
+
+
    
+The base importer. Dispatch the import the call to the standard Python
+  importer.

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    begin(self)
    
+      Many imports can be made for a single import statement.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        name,
+        globals={},
+        locals={},
+        fromlist=[],
+        level=-1)
    
+      The import method itself.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    end(self)
    
+      Needed for clean up.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    begin(self)
+  
    
+      		source code 
+    
    
+  
+  Many imports can be made for a single import statement. This method 
+  help the management of this aspect.
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.custom_import._DateTrackerImporter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.custom_import._DateTrackerImporter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.custom_import._DateTrackerImporter-class.html
@@ -0,0 +1,505 @@
+
+
+
+
+  web2py.gluon.custom_import._DateTrackerImporter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module custom_import ::
+        Class _DateTrackerImporter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class _DateTrackerImporter
    source code

    
+
    +   object --+    
+            |    
+_BaseImporter --+
+                |
+               _DateTrackerImporter
+
    
+
+
    Known Subclasses:
    
+
    
+    _Web2pyDateTrackerImporter
+
    
+
+
    
+An importer tracking the date of the module files and reloading them 
+  when they have changed.

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    begin(self)
    
+      Many imports can be made for a single import statement.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        name,
+        globals={},
+        locals={},
+        fromlist=[],
+        level=-1)
    
+      The import method itself.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _update_dates(self,
+        name,
+        fromlist)
    
+      Update all the dates associated to the statement import.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _reload_check(self,
+        name)
    
+      Update the date associated to the module and reload the module if 
+      the file has changed.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    end(self)
    
+      Needed for clean up.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    _get_module_file(cls,
+        module)
    
+      Get the absolute path file associated to the module or None.    		
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        _PACKAGE_PATH_SUFFIX = '/__init__.py'
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    begin(self)
+  
    
+      		source code 
+    
    
+  
+  Many imports can be made for a single import statement. This method 
+  help the management of this aspect.
+  
    
+    
    Overrides:
+      _BaseImporter.begin
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __call__(self,
+        name,
+        globals={},
+        locals={},
+        fromlist=[],
+        level=-1)
+    
    (Call operator)
+  
    
+      		source code 
+    
    
+  
+  The import method itself.
+  
    
+    
    Overrides:
+      _BaseImporter.__call__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _update_dates(self,
+        name,
+        fromlist)
+  
    
+      		source code 
+    
    
+  
+  Update all the dates associated to the statement import. A single 
+  import statement may import many modules.
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    end(self)
+  
    
+      		source code 
+    
    
+  
+  Needed for clean up.
+  
    
+    
    Overrides:
+      _BaseImporter.end
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.custom_import._Web2pyDateTrackerImporter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.custom_import._Web2pyDateTrackerImporter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.custom_import._Web2pyDateTrackerImporter-class.html
@@ -0,0 +1,262 @@
+
+
+
+
+  web2py.gluon.custom_import._Web2pyDateTrackerImporter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module custom_import ::
+        Class _Web2pyDateTrackerImporter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class _Web2pyDateTrackerImporter
    source code

    
+
    +      object --+        
+               |        
+   _BaseImporter --+    
+                   |    
+     _Web2pyImporter --+
+                       |
+      object --+       |
+               |       |
+   _BaseImporter --+   |
+                   |   |
+_DateTrackerImporter --+
+                       |
+                      _Web2pyDateTrackerImporter
+
    
+
+
    
+Like _Web2pyImporter but using a _DateTrackerImporter.

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from _Web2pyImporter:
+      __call__,
+      __init__
+      
    
+    
        
    Inherited from _Web2pyImporter (private):
+      _Web2pyImporter__import__dot,
+      _matchAppDir
+      
    
+    
    Inherited from _DateTrackerImporter:
+      begin,
+      end
+      
    
+    
        
    Inherited from _DateTrackerImporter (private):
+      _reload_check,
+      _update_dates
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Methods[hide private]
    
+  
    
+    
        
    Inherited from _DateTrackerImporter (private):
+      _get_module_file
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+    
        
    Inherited from _Web2pyImporter (private):
+      _RE_ESCAPED_PATH_SEP
+      
    
+    
        
    Inherited from _DateTrackerImporter (private):
+      _PACKAGE_PATH_SUFFIX
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.custom_import._Web2pyImporter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.custom_import._Web2pyImporter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.custom_import._Web2pyImporter-class.html
@@ -0,0 +1,468 @@
+
+
+
+
+  web2py.gluon.custom_import._Web2pyImporter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module custom_import ::
+        Class _Web2pyImporter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class _Web2pyImporter
    source code

    
+
    +   object --+    
+            |    
+_BaseImporter --+
+                |
+               _Web2pyImporter
+
    
+
+
    Known Subclasses:
    
+
    
+    _Web2pyDateTrackerImporter
+
    
+
+
    
+The standard web2py importer. Like the standard Python importer but it
+  tries to transform import statements as something like "import 
+  applications.app_name.modules.x". If the import failed, fall back on
+  _BaseImporter.

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        web2py_path)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _matchAppDir(self,
+        file_path)
    
+      Does the file in a directory inside the "applications" 
+      directory?    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        name,
+        globals={},
+        locals={},
+        fromlist=[],
+        level=-1)
    
+      The import method itself.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __import__dot(self,
+        prefix,
+        name,
+        globals,
+        locals,
+        fromlist,
+        level)
    
+      Here we will import x.y.z as many imports like: from 
+      applications.app_name.modules import x from 
+      applications.app_name.modules.x import y from 
+      applications.app_name.modules.x.y import z.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _Web2pyImporter__import__dot(self,
+        prefix,
+        name,
+        globals,
+        locals,
+        fromlist,
+        level)
    
+      Here we will import x.y.z as many imports like: from 
+      applications.app_name.modules import x from 
+      applications.app_name.modules.x import y from 
+      applications.app_name.modules.x.y import z.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from _BaseImporter:
+      begin,
+      end
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        _RE_ESCAPED_PATH_SEP = '\\/'
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        web2py_path)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Parameters:
    
+    
      
+        
    • web2py_path - The absolute path of the web2py installation.
      • 
+    
    
+    
    Overrides:
+      object.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __call__(self,
+        name,
+        globals={},
+        locals={},
+        fromlist=[],
+        level=-1)
+    
    (Call operator)
+  
    
+      		source code 
+    
    
+  
+  The import method itself.
+  
    
+    
    Overrides:
+      _BaseImporter.__call__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __import__dot(self,
+        prefix,
+        name,
+        globals,
+        locals,
+        fromlist,
+        level)
+  
    
+      		source code 
+    
    
+  
+  Here we will import x.y.z as many imports like: from 
+  applications.app_name.modules import x from 
+  applications.app_name.modules.x import y from 
+  applications.app_name.modules.x.y import z. x will be the module 
+  returned.
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _Web2pyImporter__import__dot(self,
+        prefix,
+        name,
+        globals,
+        locals,
+        fromlist,
+        level)
+  
    
+      		source code 
+    
    
+  
+  Here we will import x.y.z as many imports like: from 
+  applications.app_name.modules import x from 
+  applications.app_name.modules.x import y from 
+  applications.app_name.modules.x.y import z. x will be the module 
+  returned.
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal-module.html
Index: applications/examples/static/epydoc/web2py.gluon.dal-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal-module.html
@@ -0,0 +1,1426 @@
+
+
+
+
+  web2py.gluon.dal
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module dal
    source code

    
+
    +
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+Thanks to
+    * Niall Sweeny <niall.sweeny@fonjax.com> for MS SQL support
+    * Marcel Leuthi <mluethi@mlsystems.ch> for Oracle support
+    * Denes
+    * Chris Clark
+    * clach05
+    * Denes Lengyel
+    * and many others who have contributed to current and previous versions
+
+This file contains the DAL support for many relational databases,
+including:
+- SQLite
+- MySQL
+- Postgres
+- Oracle
+- MS SQL
+- DB2
+- Interbase
+- Ingres
+- SapDB (experimental)
+- Cubrid (experimental)
+- CouchDB (experimental)
+- MongoDB (in progress)
+- Google:nosql
+- Google:sql
+
+Example of usage:
+
+>>> # from dal import DAL, Field
+
+### create DAL connection (and create DB if not exists)
+>>> db=DAL(('mysql://a:b@locahost/x','sqlite://storage.sqlite'),folder=None)
+
+### define a table 'person' (create/aster as necessary)
+>>> person = db.define_table('person',Field('name','string'))
+
+### insert a record
+>>> id = person.insert(name='James')
+
+### retrieve it by id
+>>> james = person(id)
+
+### retrieve it by name
+>>> james = person(name='James')
+
+### retrieve it by arbitrary query
+>>> query = (person.name=='James')&(person.name.startswith('J'))
+>>> james = db(query).select(person.ALL)[0]
+
+### update one record
+>>> james.update_record(name='Jim')
+
+### update multiple records by query
+>>> db(person.name.like('J%')).update(name='James')
+1
+
+### delete records by query
+>>> db(person.name.lower()=='jim').delete()
+0
+
+### retrieve multiple records (rows)
+>>> people = db(person).select(orderby=person.name,groupby=person.name,limitby=(0,100))
+
+### further filter them
+>>> james = people.find(lambda row: row.name=='James').first()
+>>> print james.id, james.name
+1 James
+
+### check aggrgates
+>>> counter = person.id.count()
+>>> print db(person).select(counter).first()(counter)
+1
+
+### delete one record
+>>> james.delete_record()
+1
+
+### delete (drop) entire database table
+>>> person.drop()
+
+Supported field types:
+id string text boolean integer double decimal password upload blob time date datetime,
+
+Supported DAL URI strings:
+'sqlite://test.db'
+'sqlite:memory'
+'jdbc:sqlite://test.db'
+'mysql://root:none@localhost/test'
+'postgres://mdipierro:none@localhost/test'
+'jdbc:postgres://mdipierro:none@localhost/test'
+'mssql://web2py:none@A64X2/web2py_test'
+'mssql2://web2py:none@A64X2/web2py_test' # alternate mappings
+'oracle://username:password@database'
+'firebird://user:password@server:3050/database'
+'db2://DSN=dsn;UID=user;PWD=pass'
+'firebird://username:password@hostname/database'
+'firebird_embedded://username:password@c://path'
+'informix://user:password@server:3050/database'
+'informixu://user:password@server:3050/database' # unicode informix
+'google:datastore' # for google app engine datastore
+'google:sql' # for google app engine with sql (mysql compatible)
+'teradata://DSN=dsn;UID=user;PWD=pass' # experimental 
+
+For more info:
+help(DAL)
+help(Field)
+
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        GAEDecimalProperty
    
+      GAE decimal implementation
+    
    
+       
+    
+        ConnectionPool
+    
    
+       
+    
+        BaseAdapter
+    
    
+       
+    
+        SQLiteAdapter
+    
    
+       
+    
+        JDBCSQLiteAdapter
+    
    
+       
+    
+        MySQLAdapter
+    
    
+       
+    
+        PostgreSQLAdapter
+    
    
+       
+    
+        JDBCPostgreSQLAdapter
+    
    
+       
+    
+        OracleAdapter
+    
    
+       
+    
+        MSSQLAdapter
+    
    
+       
+    
+        MSSQL2Adapter
+    
    
+       
+    
+        FireBirdAdapter
+    
    
+       
+    
+        FireBirdEmbeddedAdapter
+    
    
+       
+    
+        InformixAdapter
+    
    
+       
+    
+        DB2Adapter
+    
    
+       
+    
+        TeradataAdapter
+    
    
+       
+    
+        IngresAdapter
+    
    
+       
+    
+        IngresUnicodeAdapter
+    
    
+       
+    
+        SAPDBAdapter
+    
    
+       
+    
+        CubridAdapter
+    
    
+       
+    
+        DatabaseStoredFile
+    
    
+       
+    
+        UseDatabaseStoredFile
+    
    
+       
+    
+        GoogleSQLAdapter
+    
    
+       
+    
+        NoSQLAdapter
+    
    
+       
+    
+        GAEF
+    
    
+       
+    
+        GoogleDatastoreAdapter
+    
    
+       
+    
+        CouchDBAdapter
+    
    
+       
+    
+        MongoDBAdapter
+    
    
+       
+    
+        Row
    
+      a dictionary that lets you do d['a'] as well as d.a this is only
+        used to store a Row
+    
    
+       
+    
+        SQLCallableList
+    
    
+       
+    
+        DAL
    
+      an instance of this class represents a database connection
+    
    
+       
+    
+        SQLALL
    
+      Helper class providing a comma-separated string having all the 
+        field names (prefixed by table name and '.')
+    
    
+       
+    
+        Reference
+    
    
+       
+    
+        Table
    
+      an instance of this class represents a database table
+    
    
+       
+    
+        Expression
+    
    
+       
+    
+        SQLCustomType
    
+      allows defining of custom SQL types...
+    
    
+       
+    
+        Field
    
+      an instance of this class represents a database field
+    
    
+       
+    
+        Query
    
+      a query object necessary to define a set.
+    
    
+       
+    
+        Set
    
+      a Set represents a set of records in the database,
+the records are identified by the query=Query(...) object.
+    
    
+       
+    
+        Rows
    
+      A wrapper for the return value of a select.
+    
    
+       
+    
+        SQLField
    
+      an instance of this class represents a database field
+    
    
+       
+    
+        SQLTable
    
+      an instance of this class represents a database table
+    
    
+       
+    
+        SQLXorable
+    
    
+       
+    
+        SQLQuery
    
+      a query object necessary to define a set.
+    
    
+       
+    
+        SQLSet
    
+      a Set represents a set of records in the database,
+the records are identified by the query=Query(...) object.
+    
    
+       
+    
+        SQLRows
    
+      A wrapper for the return value of a select.
+    
    
+       
+    
+        SQLStorage
    
+      a dictionary that lets you do d['a'] as well as d.a this is only
+        used to store a Row
+    
    
+       
+    
+        SQLDB
    
+      an instance of this class represents a database connection
+    
    
+       
+    
+        GQLDB
    
+      an instance of this class represents a database connection
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    DEFAULT()
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    uuid2int(uuidv)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    int2uuid(n)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    cleanup(text)
    
+      validates that the given text is clean: only contains 
+      [0-9a-zA-Z_]    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    sqlhtml_validators(field)
    
+      Field type validation, using web2py's validators mechanism.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    bar_escape(item)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    bar_encode(items)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    bar_decode_integer(value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    bar_decode_string(value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    Row_unpickler(data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    Row_pickler(data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    Reference_unpickler(data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    Reference_pickler(data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    xorify(orderby)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    update_record(pack,
+        a={})
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    Rows_unpickler(data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    Rows_pickler(data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    test_all()
    
+      >>> if len(sys.argv)<2: db = DAL("sqlite://test.db")...    		
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        MAXCHARLENGTH = 512
+    
    
+       
+    
+        INFINITY = 32768
+    
    
+       
+    
+        CALLABLETYPES = (<type 'function'>, <type 'function'>, <type '...
+    
    
+       
+    
+        have_portalocker = True
+    
    
+       
+    
+        have_serializers = True
+    
    
+       
+    
+        have_validators = True
+    
    
+       
+    
+        logger = logging.getLogger("web2py.dal")
+    
    
+       
+    
+        sql_locker = <_RLock(None, 0)>
+    
    
+       
+    
+        thread = threading.local()
+    
    
+       
+    
+        regex_dbname = re.compile(r'^(\w+)(:\w+)*')
+    
    
+       
+    
+        table_field = re.compile(r'^[\w_]+\.[\w_]+$')
+    
    
+       
+    
+        regex_content = re.compile(r'(?P<table>[\w-]+)\.(?P<field>[\w-...
+    
    
+       
+    
+        regex_cleanup_fn = re.compile(r'[\'"\s;]+')
+    
    
+       
+    
+        string_unpack = re.compile(r'(?<!\|)\|(?!\|)')
+    
    
+       
+    
+        regex_python_keywords = re.compile(r'^(and|del|from|not|while|...
+    
    
+       
+    
+        drivers = ['SQLite3', 'pymysql', 'PostgreSQL']
+    
    
+       
+    
+        is_jdbc = True
+    
    
+       
+    
+        INGRES_SEQNAME = 'ii***lineitemsequence'
+    
    
+       
+    
+        ADAPTERS = {'couchdb': <class 'web2py.gluon.dal.CouchDBAdapter...
+    
    
+       
+    
+        regex_quotes = re.compile(r'\'[^\']*\'')
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Function Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    sqlhtml_validators(field)
+  
    
+      		source code 
+    
    
+  
+  
    Field type validation, using web2py's validators mechanism.
    
+  makes sure the content of a field is in line with the declared 
+  fieldtype
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    test_all()
+  
    
+      		source code 
+    
    
+  
+  
    +
+
+ >>> if len(sys.argv)<2: db = DAL("sqlite://test.db")
+ >>> if len(sys.argv)>1: db = DAL(sys.argv[1])
+ >>> tmp = db.define_table('users',              Field('stringf', 'string', length=32, required=True),              Field('booleanf', 'boolean', default=False),              Field('passwordf', 'password', notnull=True),              Field('uploadf', 'upload'),              Field('blobf', 'blob'),              Field('integerf', 'integer', unique=True),              Field('doublef', 'double', unique=True,notnull=True),              Field('datef', 'date', default=datetime.date.today()),              Field('timef', 'time'),              Field('datetimef', 'datetime'),              migrate='test_user.table')
+
+Insert a field
+
+ >>> db.users.insert(stringf='a', booleanf=True, passwordf='p', blobf='0A',                       uploadf=None, integerf=5, doublef=3.14,                       datef=datetime.date(2001, 1, 1),                       timef=datetime.time(12, 30, 15),                       datetimef=datetime.datetime(2002, 2, 2, 12, 30, 15))
+ 1
+
+ Drop the table
+
+ >>> db.users.drop()
+
+ Examples of insert, select, update, delete
+
+ >>> tmp = db.define_table('person',              Field('name'),              Field('birth','date'),              migrate='test_person.table')
+ >>> person_id = db.person.insert(name="Marco",birth='2005-06-22')
+ >>> person_id = db.person.insert(name="Massimo",birth='1971-12-21')
+
+ commented len(db().select(db.person.ALL))
+ commented 2
+
+ >>> me = db(db.person.id==person_id).select()[0] # test select
+ >>> me.name
+ 'Massimo'
+ >>> db(db.person.name=='Massimo').update(name='massimo') # test update
+ 1
+ >>> db(db.person.name=='Marco').select().first().delete_record() # test delete
+ 1
+
+ Update a single record
+
+ >>> me.update_record(name="Max")
+ >>> me.name
+ 'Max'
+
+ Examples of complex search conditions
+
+ >>> len(db((db.person.name=='Max')&(db.person.birth<'2003-01-01')).select())
+ 1
+ >>> len(db((db.person.name=='Max')&(db.person.birth<datetime.date(2003,01,01))).select())
+ 1
+ >>> len(db((db.person.name=='Max')|(db.person.birth<'2003-01-01')).select())
+ 1
+ >>> me = db(db.person.id==person_id).select(db.person.name)[0]
+ >>> me.name
+ 'Max'
+
+ Examples of search conditions using extract from date/datetime/time
+
+ >>> len(db(db.person.birth.month()==12).select())
+ 1
+ >>> len(db(db.person.birth.year()>1900).select())
+ 1
+
+ Example of usage of NULL
+
+ >>> len(db(db.person.birth==None).select()) ### test NULL
+ 0
+ >>> len(db(db.person.birth!=None).select()) ### test NULL
+ 1
+
+ Examples of search conditions using lower, upper, and like
+
+ >>> len(db(db.person.name.upper()=='MAX').select())
+ 1
+ >>> len(db(db.person.name.like('%ax')).select())
+ 1
+ >>> len(db(db.person.name.upper().like('%AX')).select())
+ 1
+ >>> len(db(~db.person.name.upper().like('%AX')).select())
+ 0
+
+ orderby, groupby and limitby
+
+ >>> people = db().select(db.person.name, orderby=db.person.name)
+ >>> order = db.person.name|~db.person.birth
+ >>> people = db().select(db.person.name, orderby=order)
+
+ >>> people = db().select(db.person.name, orderby=db.person.name, groupby=db.person.name)
+
+ >>> people = db().select(db.person.name, orderby=order, limitby=(0,100))
+
+ Example of one 2 many relation
+
+ >>> tmp = db.define_table('dog',               Field('name'),               Field('birth','date'),               Field('owner',db.person),               migrate='test_dog.table')
+ >>> db.dog.insert(name='Snoopy', birth=None, owner=person_id)
+ 1
+
+ A simple JOIN
+
+ >>> len(db(db.dog.owner==db.person.id).select())
+ 1
+
+ >>> len(db().select(db.person.ALL, db.dog.name,left=db.dog.on(db.dog.owner==db.person.id)))
+ 1
+
+ Drop tables
+
+ >>> db.dog.drop()
+ >>> db.person.drop()
+
+ Example of many 2 many relation and Set
+
+ >>> tmp = db.define_table('author', Field('name'),                            migrate='test_author.table')
+ >>> tmp = db.define_table('paper', Field('title'),                            migrate='test_paper.table')
+ >>> tmp = db.define_table('authorship',            Field('author_id', db.author),            Field('paper_id', db.paper),            migrate='test_authorship.table')
+ >>> aid = db.author.insert(name='Massimo')
+ >>> pid = db.paper.insert(title='QCD')
+ >>> tmp = db.authorship.insert(author_id=aid, paper_id=pid)
+
+ Define a Set
+
+ >>> authored_papers = db((db.author.id==db.authorship.author_id)&(db.paper.id==db.authorship.paper_id))
+ >>> rows = authored_papers.select(db.author.name, db.paper.title)
+ >>> for row in rows: print row.author.name, row.paper.title
+ Massimo QCD
+
+ Example of search condition using  belongs
+
+ >>> set = (1, 2, 3)
+ >>> rows = db(db.paper.id.belongs(set)).select(db.paper.ALL)
+ >>> print rows[0].title
+ QCD
+
+ Example of search condition using nested select
+
+ >>> nested_select = db()._select(db.authorship.paper_id)
+ >>> rows = db(db.paper.id.belongs(nested_select)).select(db.paper.ALL)
+ >>> print rows[0].title
+ QCD
+
+ Example of expressions
+
+ >>> mynumber = db.define_table('mynumber', Field('x', 'integer'))
+ >>> db(mynumber.id>0).delete()
+ 0
+ >>> for i in range(10): tmp = mynumber.insert(x=i)
+ >>> db(mynumber.id>0).select(mynumber.x.sum())[0](mynumber.x.sum())
+ 45
+
+ >>> db(mynumber.x+2==5).select(mynumber.x + 2)[0](mynumber.x + 2)
+ 5
+
+ Output in csv
+
+ >>> print str(authored_papers.select(db.author.name, db.paper.title)).strip()
+ author.name,paper.title
+ Massimo,QCD
+
+ Delete all leftover tables
+
+ >>> DAL.distributed_transaction_commit(db)
+
+ >>> db.mynumber.drop()
+ >>> db.authorship.drop()
+ >>> db.author.drop()
+ >>> db.paper.drop()
+ 
+
+
    
+  
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Variables Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    CALLABLETYPES
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +(<type 'function'>,
+ <type 'function'>,
+ <type 'builtin_function_or_method'>,
+ <type 'instancemethod'>,
+ <type 'builtin_function_or_method'>)
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    regex_content
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +re.compile(r'(?P<table>[\w-]+)\.(?P<field>[\w-]+)\.(?P<uuidkey>[\w-]+)\
+\.(?P<name>\w+)\.\w+$')
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    regex_python_keywords
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +re.compile(r'^(and|del|from|not|while|as|elif|global|or|with|assert|el\
+se|if|pass|yield|break|except|import|print|class|exec|in|raise|continu\
+e|finally|is|return|def|for|lambda|try)$')
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    ADAPTERS
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'couchdb': <class 'web2py.gluon.dal.CouchDBAdapter'>,
+ 'cubrid': <class 'web2py.gluon.dal.CubridAdapter'>,
+ 'db2': <class 'web2py.gluon.dal.DB2Adapter'>,
+ 'firebird': <class 'web2py.gluon.dal.FireBirdAdapter'>,
+ 'firebird_embedded': <class 'web2py.gluon.dal.FireBirdAdapter'>,
+ 'gae': <class 'web2py.gluon.dal.GoogleDatastoreAdapter'>,
+ 'google:datastore': <class 'web2py.gluon.dal.GoogleDatastoreAdapter'>\
+,
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.dal-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal-pysrc.html
@@ -0,0 +1,12344 @@
+
+
+
+
+  web2py.gluon.dal
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.dal
    
+
    +   1  #!/bin/env python 
+   2  # -*- coding: utf-8 -*- 
+   3   
+   4  """ 
+   5  This file is part of the web2py Web Framework 
+   6  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+   7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+   8   
+   9  Thanks to 
+  10      * Niall Sweeny <niall.sweeny@fonjax.com> for MS SQL support 
+  11      * Marcel Leuthi <mluethi@mlsystems.ch> for Oracle support 
+  12      * Denes 
+  13      * Chris Clark 
+  14      * clach05 
+  15      * Denes Lengyel 
+  16      * and many others who have contributed to current and previous versions 
+  17   
+  18  This file contains the DAL support for many relational databases, 
+  19  including: 
+  20  - SQLite 
+  21  - MySQL 
+  22  - Postgres 
+  23  - Oracle 
+  24  - MS SQL 
+  25  - DB2 
+  26  - Interbase 
+  27  - Ingres 
+  28  - SapDB (experimental) 
+  29  - Cubrid (experimental) 
+  30  - CouchDB (experimental) 
+  31  - MongoDB (in progress) 
+  32  - Google:nosql 
+  33  - Google:sql 
+  34   
+  35  Example of usage: 
+  36   
+  37  >>> # from dal import DAL, Field 
+  38   
+  39  ### create DAL connection (and create DB if not exists) 
+  40  >>> db=DAL(('mysql://a:b@locahost/x','sqlite://storage.sqlite'),folder=None) 
+  41   
+  42  ### define a table 'person' (create/aster as necessary) 
+  43  >>> person = db.define_table('person',Field('name','string')) 
+  44   
+  45  ### insert a record 
+  46  >>> id = person.insert(name='James') 
+  47   
+  48  ### retrieve it by id 
+  49  >>> james = person(id) 
+  50   
+  51  ### retrieve it by name 
+  52  >>> james = person(name='James') 
+  53   
+  54  ### retrieve it by arbitrary query 
+  55  >>> query = (person.name=='James')&(person.name.startswith('J')) 
+  56  >>> james = db(query).select(person.ALL)[0] 
+  57   
+  58  ### update one record 
+  59  >>> james.update_record(name='Jim') 
+  60   
+  61  ### update multiple records by query 
+  62  >>> db(person.name.like('J%')).update(name='James') 
+  63  1 
+  64   
+  65  ### delete records by query 
+  66  >>> db(person.name.lower()=='jim').delete() 
+  67  0 
+  68   
+  69  ### retrieve multiple records (rows) 
+  70  >>> people = db(person).select(orderby=person.name,groupby=person.name,limitby=(0,100)) 
+  71   
+  72  ### further filter them 
+  73  >>> james = people.find(lambda row: row.name=='James').first() 
+  74  >>> print james.id, james.name 
+  75  1 James 
+  76   
+  77  ### check aggrgates 
+  78  >>> counter = person.id.count() 
+  79  >>> print db(person).select(counter).first()(counter) 
+  80  1 
+  81   
+  82  ### delete one record 
+  83  >>> james.delete_record() 
+  84  1 
+  85   
+  86  ### delete (drop) entire database table 
+  87  >>> person.drop() 
+  88   
+  89  Supported field types: 
+  90  id string text boolean integer double decimal password upload blob time date datetime, 
+  91   
+  92  Supported DAL URI strings: 
+  93  'sqlite://test.db' 
+  94  'sqlite:memory' 
+  95  'jdbc:sqlite://test.db' 
+  96  'mysql://root:none@localhost/test' 
+  97  'postgres://mdipierro:none@localhost/test' 
+  98  'jdbc:postgres://mdipierro:none@localhost/test' 
+  99  'mssql://web2py:none@A64X2/web2py_test' 
+ 100  'mssql2://web2py:none@A64X2/web2py_test' # alternate mappings 
+ 101  'oracle://username:password@database' 
+ 102  'firebird://user:password@server:3050/database' 
+ 103  'db2://DSN=dsn;UID=user;PWD=pass' 
+ 104  'firebird://username:password@hostname/database' 
+ 105  'firebird_embedded://username:password@c://path' 
+ 106  'informix://user:password@server:3050/database' 
+ 107  'informixu://user:password@server:3050/database' # unicode informix 
+ 108  'google:datastore' # for google app engine datastore 
+ 109  'google:sql' # for google app engine with sql (mysql compatible) 
+ 110  'teradata://DSN=dsn;UID=user;PWD=pass' # experimental  
+ 111   
+ 112  For more info: 
+ 113  help(DAL) 
+ 114  help(Field) 
+ 115  """ 
+ 116   
+ 117  ################################################################################### 
+ 118  # this file orly exposes DAL and Field 
+ 119  ################################################################################### 
+ 120   
+ 121  __all__ = ['DAL', 'Field'] 
+ 122  MAXCHARLENGTH = 512 
+ 123  INFINITY = 2**15 # not quite but reasonable default max char length 
+ 124   
+ 125  import re 
+ 126  import sys 
+ 127  import locale 
+ 128  import os 
+ 129  import types 
+ 130  import cPickle 
+ 131  import datetime 
+ 132  import threading 
+ 133  import time 
+ 134  import cStringIO 
+ 135  import csv 
+ 136  import copy 
+ 137  import socket 
+ 138  import logging 
+ 139  import copy_reg 
+ 140  import base64 
+ 141  import shutil 
+ 142  import marshal 
+ 143  import decimal 
+ 144  import struct 
+ 145  import urllib 
+ 146  import hashlib 
+ 147  import uuid 
+ 148  import glob 
+ 149   
+ 150  CALLABLETYPES = (types.LambdaType, types.FunctionType, types.BuiltinFunctionType, 
+ 151                   types.MethodType, types.BuiltinMethodType) 
+ 152   
+ 153   
+ 154  ################################################################################### 
+ 155  # following checks allows running of dal without web2py as a standalone module 
+ 156  ################################################################################### 
+ 157  try: 
+ 158      from utils import web2py_uuid 
+ 159  except ImportError: 
+ 160      import uuid 
+
     161 -    def web2py_uuid(): return str(uuid.uuid4()) 
+
     162   
+ 163  try: 
+ 164      import portalocker 
+ 165      have_portalocker = True 
+ 166  except ImportError: 
+ 167      have_portalocker = False 
+ 168   
+ 169  try: 
+ 170      import serializers 
+ 171      have_serializers = True 
+ 172  except ImportError: 
+ 173      have_serializers = False 
+ 174   
+ 175  try: 
+ 176      import validators 
+ 177      have_validators = True 
+ 178  except ImportError: 
+ 179      have_validators = False 
+ 180   
+ 181  logger = logging.getLogger("web2py.dal") 
+ 182  DEFAULT = lambda:0 
+ 183   
+ 184  sql_locker = threading.RLock() 
+ 185  thread = threading.local() 
+ 186   
+ 187  # internal representation of tables with field 
+ 188  #  <table>.<field>, tables and fields may only be [a-zA-Z0-0_] 
+ 189   
+ 190  regex_dbname = re.compile('^(\w+)(\:\w+)*') 
+ 191  table_field = re.compile('^[\w_]+\.[\w_]+$') 
+ 192  regex_content = re.compile('(?P<table>[\w\-]+)\.(?P<field>[\w\-]+)\.(?P<uuidkey>[\w\-]+)\.(?P<name>\w+)\.\w+$') 
+ 193  regex_cleanup_fn = re.compile('[\'"\s;]+') 
+ 194  string_unpack=re.compile('(?<!\|)\|(?!\|)') 
+ 195  regex_python_keywords = re.compile('^(and|del|from|not|while|as|elif|global|or|with|assert|else|if|pass|yield|break|except|import|print|class|exec|in|raise|continue|finally|is|return|def|for|lambda|try)$') 
+ 196   
+ 197   
+ 198   
+ 199  # list of drivers will be built on the fly 
+ 200  # and lists only what is available 
+ 201  drivers = [] 
+ 202   
+ 203  try: 
+ 204      from new import classobj 
+ 205      from google.appengine.ext import db as gae 
+ 206      from google.appengine.api import namespace_manager, rdbms 
+ 207      from google.appengine.api.datastore_types import Key  ### needed for belongs on ID 
+ 208      from google.appengine.ext.db.polymodel import PolyModel 
+ 209      drivers.append('google') 
+ 210  except ImportError: 
+ 211      pass 
+ 212   
+ 213  if not 'google' in drivers: 
+ 214   
+ 215      try: 
+ 216          from pysqlite2 import dbapi2 as sqlite3 
+ 217          drivers.append('pysqlite2') 
+ 218      except ImportError: 
+ 219          try: 
+ 220              from sqlite3 import dbapi2 as sqlite3 
+ 221              drivers.append('SQLite3') 
+ 222          except ImportError: 
+ 223              logger.debug('no sqlite3 or pysqlite2.dbapi2 driver') 
+ 224   
+ 225      try: 
+ 226          import contrib.pymysql as pymysql 
+ 227          drivers.append('pymysql') 
+ 228      except ImportError: 
+ 229          logger.debug('no pymysql driver') 
+ 230   
+ 231      try: 
+ 232          import psycopg2 
+ 233          drivers.append('PostgreSQL') 
+ 234      except ImportError: 
+ 235          logger.debug('no psycopg2 driver') 
+ 236   
+ 237      try: 
+ 238          import cx_Oracle 
+ 239          drivers.append('Oracle') 
+ 240      except ImportError: 
+ 241          logger.debug('no cx_Oracle driver') 
+ 242   
+ 243      try: 
+ 244          import pyodbc 
+ 245          drivers.append('MSSQL/DB2') 
+ 246      except ImportError: 
+ 247          logger.debug('no MSSQL/DB2 driver') 
+ 248   
+ 249      try: 
+ 250          import kinterbasdb 
+ 251          drivers.append('Interbase') 
+ 252      except ImportError: 
+ 253          logger.debug('no kinterbasdb driver') 
+ 254   
+ 255      try: 
+ 256          import firebirdsql 
+ 257          drivers.append('Firebird') 
+ 258      except ImportError: 
+ 259          logger.debug('no Firebird driver') 
+ 260   
+ 261      try: 
+ 262          import informixdb 
+ 263          drivers.append('Informix') 
+ 264          logger.warning('Informix support is experimental') 
+ 265      except ImportError: 
+ 266          logger.debug('no informixdb driver') 
+ 267           
+ 268      try: 
+ 269          import sapdb 
+ 270          drivers.append('SAPDB') 
+ 271          logger.warning('SAPDB support is experimental') 
+ 272      except ImportError: 
+ 273          logger.debug('no sapdb driver') 
+ 274   
+ 275      try: 
+ 276          import cubriddb 
+ 277          drivers.append('Cubrid') 
+ 278          logger.warning('Cubrid support is experimental') 
+ 279      except ImportError: 
+ 280          logger.debug('no cubriddb driver') 
+ 281   
+ 282      try: 
+ 283          from com.ziclix.python.sql import zxJDBC 
+ 284          import java.sql 
+ 285          # Try sqlite jdbc driver from http://www.zentus.com/sqlitejdbc/ 
+ 286          from org.sqlite import JDBC # required by java.sql; ensure we have it 
+ 287          drivers.append('zxJDBC') 
+ 288          logger.warning('zxJDBC support is experimental') 
+ 289          is_jdbc = True 
+ 290      except ImportError: 
+ 291          logger.debug('no zxJDBC driver') 
+ 292          is_jdbc = False 
+ 293   
+ 294      try: 
+ 295          import ingresdbi 
+ 296          drivers.append('Ingres') 
+ 297      except ImportError: 
+ 298          logger.debug('no Ingres driver') 
+ 299      # NOTE could try JDBC....... 
+ 300   
+ 301      try: 
+ 302          import couchdb 
+ 303          drivers.append('CouchDB') 
+ 304      except ImportError: 
+ 305          logger.debug('no couchdb driver') 
+ 306   
+ 307      try: 
+ 308          import pymongo 
+ 309          drivers.append('mongoDB') 
+ 310      except: 
+ 311          logger.debug('no mongoDB driver') 
+ 312   
+ 313   
+ 314  if 'google' in drivers: 
+ 315   
+ 316      is_jdbc = False 
+ 317   
+
     318 -    class GAEDecimalProperty(gae.Property): 
+
     319          """ 
+ 320          GAE decimal implementation 
+ 321          """ 
+ 322          data_type = decimal.Decimal 
+ 323   
+
     324 -        def __init__(self, precision, scale, **kwargs): 
+
     325              super(GAEDecimalProperty, self).__init__(self, **kwargs) 
+ 326              d = '1.' 
+ 327              for x in range(scale): 
+ 328                  d += '0' 
+ 329              self.round = decimal.Decimal(d) 
+
     330   
+
     331 -        def get_value_for_datastore(self, model_instance): 
+
     332              value = super(GAEDecimalProperty, self).get_value_for_datastore(model_instance) 
+ 333              if value: 
+ 334                  return str(value) 
+ 335              else: 
+ 336                  return None 
+
     337   
+
     338 -        def make_value_from_datastore(self, value): 
+
     339              if value: 
+ 340                  return decimal.Decimal(value).quantize(self.round) 
+ 341              else: 
+ 342                  return None 
+
     343   
+
     344 -        def validate(self, value): 
+
     345              value = super(GAEDecimalProperty, self).validate(value) 
+ 346              if value is None or isinstance(value, decimal.Decimal): 
+ 347                  return value 
+ 348              elif isinstance(value, basestring): 
+ 349                  return decimal.Decimal(value) 
+ 350              raise gae.BadValueError("Property %s must be a Decimal or string." % self.name) 
+
     351   
+ 352  ################################################################################### 
+ 353  # class that handles connection pooling (all adapters derived form this one) 
+ 354  ################################################################################### 
+ 355   
+
     356 -class ConnectionPool(object): 
+
     357   
+ 358      pools = {} 
+ 359   
+ 360      @staticmethod 
+
     361 -    def set_folder(folder): 
+
     362          thread.folder = folder 
+
     363   
+ 364      # ## this allows gluon to commit/rollback all dbs in this thread 
+ 365   
+ 366      @staticmethod 
+
     367 -    def close_all_instances(action): 
+
     368          """ to close cleanly databases in a multithreaded environment """ 
+ 369          if not hasattr(thread,'instances'): 
+ 370              return 
+ 371          while thread.instances: 
+ 372              instance = thread.instances.pop() 
+ 373              getattr(instance,action)() 
+ 374              # ## if you want pools, recycle this connection 
+ 375              really = True 
+ 376              if instance.pool_size: 
+ 377                  sql_locker.acquire() 
+ 378                  pool = ConnectionPool.pools[instance.uri] 
+ 379                  if len(pool) < instance.pool_size: 
+ 380                      pool.append(instance.connection) 
+ 381                      really = False 
+ 382                  sql_locker.release() 
+ 383              if really: 
+ 384                  getattr(instance,'close')() 
+ 385          return 
+
     386   
+
     387 -    def find_or_make_work_folder(self): 
+
     388          """ this actually does not make the folder. it has to be there """ 
+ 389          if hasattr(thread,'folder'): 
+ 390              self.folder = thread.folder 
+ 391          else: 
+ 392              self.folder = thread.folder = '' 
+ 393   
+ 394          # Creating the folder if it does not exist 
+ 395          if False and self.folder and not os.path.exists(self.folder): 
+ 396              os.mkdir(self.folder) 
+
     397   
+
     398 -    def pool_connection(self, f): 
+
     399          if not self.pool_size: 
+ 400              self.connection = f() 
+ 401          else: 
+ 402              uri = self.uri 
+ 403              sql_locker.acquire() 
+ 404              if not uri in ConnectionPool.pools: 
+ 405                  ConnectionPool.pools[uri] = [] 
+ 406              if ConnectionPool.pools[uri]: 
+ 407                  self.connection = ConnectionPool.pools[uri].pop() 
+ 408                  sql_locker.release() 
+ 409              else: 
+ 410                  sql_locker.release() 
+ 411                  self.connection = f() 
+ 412          if not hasattr(thread,'instances'): 
+ 413              thread.instances = [] 
+ 414          thread.instances.append(self) 
+
     415   
+ 416   
+ 417  ################################################################################### 
+ 418  # this is a generic adapter that does nothing; all others are derived form this one 
+ 419  ################################################################################### 
+ 420   
+
     421 -class BaseAdapter(ConnectionPool): 
+
     422   
+ 423      driver = None 
+ 424      maxcharlength = INFINITY 
+ 425      commit_on_alter_table = False 
+ 426      support_distributed_transaction = False 
+ 427      uploads_in_blob = False 
+ 428      types = { 
+ 429          'boolean': 'CHAR(1)', 
+ 430          'string': 'CHAR(%(length)s)', 
+ 431          'text': 'TEXT', 
+ 432          'password': 'CHAR(%(length)s)', 
+ 433          'blob': 'BLOB', 
+ 434          'upload': 'CHAR(%(length)s)', 
+ 435          'integer': 'INTEGER', 
+ 436          'double': 'DOUBLE', 
+ 437          'decimal': 'DOUBLE', 
+ 438          'date': 'DATE', 
+ 439          'time': 'TIME', 
+ 440          'datetime': 'TIMESTAMP', 
+ 441          'id': 'INTEGER PRIMARY KEY AUTOINCREMENT', 
+ 442          'reference': 'INTEGER REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s', 
+ 443          'list:integer': 'TEXT', 
+ 444          'list:string': 'TEXT', 
+ 445          'list:reference': 'TEXT', 
+ 446          } 
+ 447   
+
     448 -    def integrity_error(self): 
+
     449          return self.driver.IntegrityError 
+
     450   
+
     451 -    def file_exists(self, filename): 
+
     452          """ 
+ 453          to be used ONLY for files that on GAE may not be on filesystem 
+ 454          """ 
+ 455          return os.path.exists(filename) 
+
     456   
+
     457 -    def file_open(self, filename, mode='rb', lock=True): 
+
     458          """ 
+ 459          to be used ONLY for files that on GAE may not be on filesystem 
+ 460          """ 
+ 461          fileobj = open(filename,mode) 
+ 462          if have_portalocker and lock: 
+ 463              if mode in ('r','rb'): 
+ 464                  portalocker.lock(fileobj,portalocker.LOCK_SH) 
+ 465              elif mode in ('w','wb','a'): 
+ 466                  portalocker.lock(fileobj,portalocker.LOCK_EX) 
+ 467              else: 
+ 468                  fileobj.close() 
+ 469                  raise RuntimeError, "Unsupported file_open mode" 
+ 470          return fileobj 
+
     471   
+
     472 -    def file_close(self, fileobj, unlock=True): 
+
     473          """ 
+ 474          to be used ONLY for files that on GAE may not be on filesystem 
+ 475          """ 
+ 476          if fileobj: 
+ 477              if have_portalocker and unlock: 
+ 478                  portalocker.unlock(fileobj) 
+ 479              fileobj.close() 
+
     480   
+
     481 -    def file_delete(self, filename): 
+
     482          os.unlink(filename) 
+
     483   
+
     484 -    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8', 
+ 485                   credential_decoder=lambda x:x, driver_args={}, 
+ 486                   adapter_args={}): 
+
     487          self.db = db 
+ 488          self.dbengine = "None" 
+ 489          self.uri = uri 
+ 490          self.pool_size = pool_size 
+ 491          self.folder = folder 
+ 492          self.db_codec = db_codec 
+ 493          class Dummy(object): 
+ 494              lastrowid = 1 
+ 495              def __getattr__(self, value): 
+ 496                  return lambda *a, **b: [] 
+
     497          self.connection = Dummy() 
+ 498          self.cursor = Dummy() 
+ 499   
+
     500 -    def sequence_name(self,tablename): 
+
     501          return '%s_sequence' % tablename 
+
     502   
+
     503 -    def trigger_name(self,tablename): 
+
     504          return '%s_sequence' % tablename 
+
     505   
+ 506   
+
     507 -    def create_table(self, table, migrate=True, fake_migrate=False, polymodel=None): 
+
     508          fields = [] 
+ 509          sql_fields = {} 
+ 510          sql_fields_aux = {} 
+ 511          TFK = {} 
+ 512          tablename = table._tablename 
+ 513          sortable = 0 
+ 514          for field in table: 
+ 515              sortable += 1 
+ 516              k = field.name 
+ 517              if isinstance(field.type,SQLCustomType): 
+ 518                  ftype = field.type.native or field.type.type 
+ 519              elif field.type.startswith('reference'): 
+ 520                  referenced = field.type[10:].strip() 
+ 521                  constraint_name = self.constraint_name(tablename, field.name) 
+ 522                  if hasattr(table,'_primarykey'): 
+ 523                      rtablename,rfieldname = referenced.split('.') 
+ 524                      rtable = table._db[rtablename] 
+ 525                      rfield = rtable[rfieldname] 
+ 526                      # must be PK reference or unique 
+ 527                      if rfieldname in rtable._primarykey or rfield.unique: 
+ 528                          ftype = self.types[rfield.type[:9]] % dict(length=rfield.length) 
+ 529                          # multicolumn primary key reference? 
+ 530                          if not rfield.unique and len(rtable._primarykey)>1 : 
+ 531                              # then it has to be a table level FK 
+ 532                              if rtablename not in TFK: 
+ 533                                  TFK[rtablename] = {} 
+ 534                              TFK[rtablename][rfieldname] = field.name 
+ 535                          else: 
+ 536                              ftype = ftype + \ 
+ 537                                  self.types['reference FK'] %dict(\ 
+ 538                                  constraint_name=constraint_name, 
+ 539                                  table_name=tablename, 
+ 540                                  field_name=field.name, 
+ 541                                  foreign_key='%s (%s)'%(rtablename, rfieldname), 
+ 542                                  on_delete_action=field.ondelete) 
+ 543                  else: 
+ 544                      # make a guess here for circular references 
+ 545                      id_fieldname = referenced in table._db and table._db[referenced]._id.name or 'id' 
+ 546                      ftype = self.types[field.type[:9]]\ 
+ 547                          % dict(table_name=tablename, 
+ 548                                 field_name=field.name, 
+ 549                                 constraint_name=constraint_name, 
+ 550                                 foreign_key=referenced + ('(%s)' % id_fieldname), 
+ 551                                 on_delete_action=field.ondelete) 
+ 552              elif field.type.startswith('list:reference'): 
+ 553                  ftype = self.types[field.type[:14]] 
+ 554              elif field.type.startswith('decimal'): 
+ 555                  precision, scale = map(int,field.type[8:-1].split(',')) 
+ 556                  ftype = self.types[field.type[:7]] % \ 
+ 557                      dict(precision=precision,scale=scale) 
+ 558              elif not field.type in self.types: 
+ 559                  raise SyntaxError, 'Field: unknown field type: %s for %s' % \ 
+ 560                      (field.type, field.name) 
+ 561              else: 
+ 562                  ftype = self.types[field.type]\ 
+ 563                       % dict(length=field.length) 
+ 564              if not field.type.startswith('id') and not field.type.startswith('reference'): 
+ 565                  if field.notnull: 
+ 566                      ftype += ' NOT NULL' 
+ 567                  else: 
+ 568                      ftype += self.ALLOW_NULL() 
+ 569                  if field.unique: 
+ 570                      ftype += ' UNIQUE' 
+ 571   
+ 572              # add to list of fields 
+ 573              sql_fields[field.name] = dict(sortable=sortable, 
+ 574                                            type=str(field.type), 
+ 575                                            sql=ftype) 
+ 576   
+ 577              if isinstance(field.default,(str,int,float)): 
+ 578                  # caveat: sql_fields and sql_fields_aux differ for default values 
+ 579                  # sql_fields is used to trigger migrations and sql_fields_aux 
+ 580                  # are used for create table 
+ 581                  # the reason is that we do not want to trigger a migration simply 
+ 582                  # because a default value changes 
+ 583                  not_null = self.NOT_NULL(field.default,field.type) 
+ 584                  ftype = ftype.replace('NOT NULL',not_null) 
+ 585              sql_fields_aux[field.name] = dict(sql=ftype) 
+ 586   
+ 587              fields.append('%s %s' % (field.name, ftype)) 
+ 588          other = ';' 
+ 589   
+ 590          # backend-specific extensions to fields 
+ 591          if self.dbengine == 'mysql': 
+ 592              if not hasattr(table, "_primarykey"): 
+ 593                  fields.append('PRIMARY KEY(%s)' % table._id.name) 
+ 594              other = ' ENGINE=InnoDB CHARACTER SET utf8;' 
+ 595   
+ 596          fields = ',\n    '.join(fields) 
+ 597          for rtablename in TFK: 
+ 598              rfields = TFK[rtablename] 
+ 599              pkeys = table._db[rtablename]._primarykey 
+ 600              fkeys = [ rfields[k] for k in pkeys ] 
+ 601              fields = fields + ',\n    ' + \ 
+ 602                       self.types['reference TFK'] %\ 
+ 603                       dict(table_name=tablename, 
+ 604                       field_name=', '.join(fkeys), 
+ 605                       foreign_table=rtablename, 
+ 606                       foreign_key=', '.join(pkeys), 
+ 607                       on_delete_action=field.ondelete) 
+ 608   
+ 609          if hasattr(table,'_primarykey'): 
+ 610              query = '''CREATE TABLE %s(\n    %s,\n    %s) %s''' % \ 
+ 611                  (tablename, fields, self.PRIMARY_KEY(', '.join(table._primarykey)),other) 
+ 612          else: 
+ 613              query = '''CREATE TABLE %s(\n    %s\n)%s''' % \ 
+ 614                  (tablename, fields, other) 
+ 615   
+ 616          if self.uri.startswith('sqlite:///'): 
+ 617              path_encoding = sys.getfilesystemencoding() or locale.getdefaultlocale()[1] or 'utf8' 
+ 618              dbpath = self.uri[9:self.uri.rfind('/')].decode('utf8').encode(path_encoding) 
+ 619          else: 
+ 620              dbpath = self.folder 
+ 621   
+ 622          if not migrate: 
+ 623              return query 
+ 624          elif self.uri.startswith('sqlite:memory'): 
+ 625              table._dbt = None 
+ 626          elif isinstance(migrate, str): 
+ 627              table._dbt = os.path.join(dbpath, migrate) 
+ 628          else: 
+ 629              table._dbt = os.path.join(dbpath, '%s_%s.table' \ 
+ 630                                            % (table._db._uri_hash, tablename)) 
+ 631          if table._dbt: 
+ 632              table._loggername = os.path.join(dbpath, 'sql.log') 
+ 633              logfile = self.file_open(table._loggername, 'a') 
+ 634          else: 
+ 635              logfile = None 
+ 636          if not table._dbt or not self.file_exists(table._dbt): 
+ 637              if table._dbt: 
+ 638                  logfile.write('timestamp: %s\n' 
+ 639                                 % datetime.datetime.today().isoformat()) 
+ 640                  logfile.write(query + '\n') 
+ 641              if not fake_migrate: 
+ 642                  self.create_sequence_and_triggers(query,table) 
+ 643                  table._db.commit() 
+ 644              if table._dbt: 
+ 645                  tfile = self.file_open(table._dbt, 'w') 
+ 646                  cPickle.dump(sql_fields, tfile) 
+ 647                  self.file_close(tfile) 
+ 648                  if fake_migrate: 
+ 649                      logfile.write('faked!\n') 
+ 650                  else: 
+ 651                      logfile.write('success!\n') 
+ 652          else: 
+ 653              tfile = self.file_open(table._dbt, 'r') 
+ 654              try: 
+ 655                  sql_fields_old = cPickle.load(tfile) 
+ 656              except EOFError: 
+ 657                  self.file_close(tfile) 
+ 658                  self.file_close(logfile) 
+ 659                  raise RuntimeError, 'File %s appears corrupted' % table._dbt 
+ 660              self.file_close(tfile) 
+ 661              if sql_fields != sql_fields_old: 
+ 662                  self.migrate_table(table, 
+ 663                                     sql_fields, sql_fields_old, 
+ 664                                     sql_fields_aux, logfile, 
+ 665                                     fake_migrate=fake_migrate) 
+ 666          self.file_close(logfile) 
+ 667          return query 
+
     668   
+
     669 -    def migrate_table( 
+ 670          self, 
+ 671          table, 
+ 672          sql_fields, 
+ 673          sql_fields_old, 
+ 674          sql_fields_aux, 
+ 675          logfile, 
+ 676          fake_migrate=False, 
+ 677          ): 
+
     678          tablename = table._tablename 
+ 679          def fix(item): 
+ 680              k,v=item 
+ 681              if not isinstance(v,dict): 
+ 682                  v=dict(type='unkown',sql=v) 
+ 683              return k.lower(),v 
+
     684          ### make sure all field names are lower case to avoid conflicts 
+ 685          sql_fields = dict(map(fix,sql_fields.items())) 
+ 686          sql_fields_old = dict(map(fix,sql_fields_old.items())) 
+ 687          sql_fields_aux = dict(map(fix,sql_fields_aux.items())) 
+ 688   
+ 689          keys = sql_fields.keys() 
+ 690          for key in sql_fields_old: 
+ 691              if not key in keys: 
+ 692                  keys.append(key) 
+ 693          if self.dbengine == 'mssql': 
+ 694              new_add = '; ALTER TABLE %s ADD ' % tablename 
+ 695          else: 
+ 696              new_add = ', ADD ' 
+ 697   
+ 698          metadata_change = False 
+ 699          sql_fields_current = copy.copy(sql_fields_old) 
+ 700          for key in keys: 
+ 701              query = None 
+ 702              if not key in sql_fields_old: 
+ 703                  sql_fields_current[key] = sql_fields[key] 
+ 704                  query = ['ALTER TABLE %s ADD %s %s;' % \ 
+ 705                           (tablename, key, 
+ 706                            sql_fields_aux[key]['sql'].replace(', ', new_add))] 
+ 707                  metadata_change = True 
+ 708              elif self.dbengine == 'sqlite': 
+ 709                  if key in sql_fields: 
+ 710                      sql_fields_current[key] = sql_fields[key] 
+ 711                  metadata_change = True 
+ 712              elif not key in sql_fields: 
+ 713                  del sql_fields_current[key] 
+ 714                  if not self.dbengine in ('firebird',): 
+ 715                      query = ['ALTER TABLE %s DROP COLUMN %s;' % (tablename, key)] 
+ 716                  else: 
+ 717                      query = ['ALTER TABLE %s DROP %s;' % (tablename, key)] 
+ 718                  metadata_change = True 
+ 719              elif sql_fields[key]['sql'] != sql_fields_old[key]['sql'] \ 
+ 720                    and not isinstance(table[key].type, SQLCustomType) \ 
+ 721                    and not (table[key].type.startswith('reference') and \ 
+ 722                        sql_fields[key]['sql'].startswith('INT,') and \ 
+ 723                        sql_fields_old[key]['sql'].startswith('INT NOT NULL,')): 
+ 724                  sql_fields_current[key] = sql_fields[key] 
+ 725                  t = tablename 
+ 726                  tt = sql_fields_aux[key]['sql'].replace(', ', new_add) 
+ 727                  if not self.dbengine in ('firebird',): 
+ 728                      query = ['ALTER TABLE %s ADD %s__tmp %s;' % (t, key, tt), 
+ 729                               'UPDATE %s SET %s__tmp=%s;' % (t, key, key), 
+ 730                               'ALTER TABLE %s DROP COLUMN %s;' % (t, key), 
+ 731                               'ALTER TABLE %s ADD %s %s;' % (t, key, tt), 
+ 732                               'UPDATE %s SET %s=%s__tmp;' % (t, key, key), 
+ 733                               'ALTER TABLE %s DROP COLUMN %s__tmp;' % (t, key)] 
+ 734                  else: 
+ 735                      query = ['ALTER TABLE %s ADD %s__tmp %s;' % (t, key, tt), 
+ 736                               'UPDATE %s SET %s__tmp=%s;' % (t, key, key), 
+ 737                               'ALTER TABLE %s DROP %s;' % (t, key), 
+ 738                               'ALTER TABLE %s ADD %s %s;' % (t, key, tt), 
+ 739                               'UPDATE %s SET %s=%s__tmp;' % (t, key, key), 
+ 740                               'ALTER TABLE %s DROP %s__tmp;' % (t, key)] 
+ 741                  metadata_change = True 
+ 742              elif sql_fields[key]['type'] != sql_fields_old[key]['type']: 
+ 743                  sql_fields_current[key] = sql_fields[key] 
+ 744                  metadata_change = True 
+ 745   
+ 746              if query: 
+ 747                  logfile.write('timestamp: %s\n' 
+ 748                                % datetime.datetime.today().isoformat()) 
+ 749                  table._db['_lastsql'] = '\n'.join(query) 
+ 750                  for sub_query in query: 
+ 751                      logfile.write(sub_query + '\n') 
+ 752                      if not fake_migrate: 
+ 753                          self.execute(sub_query) 
+ 754                          # caveat. mysql, oracle and firebird do not allow multiple alter table 
+ 755                          # in one transaction so we must commit partial transactions and 
+ 756                          # update table._dbt after alter table. 
+ 757                          if table._db._adapter.commit_on_alter_table: 
+ 758                              table._db.commit() 
+ 759                              tfile = self.file_open(table._dbt, 'w') 
+ 760                              cPickle.dump(sql_fields_current, tfile) 
+ 761                              self.file_close(tfile) 
+ 762                              logfile.write('success!\n') 
+ 763                      else: 
+ 764                          logfile.write('faked!\n') 
+ 765              elif metadata_change: 
+ 766                  tfile = self.file_open(table._dbt, 'w') 
+ 767                  cPickle.dump(sql_fields_current, tfile) 
+ 768                  self.file_close(tfile) 
+ 769   
+ 770          if metadata_change and \ 
+ 771                  not (query and self.dbengine in ('mysql','oracle','firebird')): 
+ 772              table._db.commit() 
+ 773              tfile = self.file_open(table._dbt, 'w') 
+ 774              cPickle.dump(sql_fields_current, tfile) 
+ 775              self.file_close(tfile) 
+ 776   
+
     777 -    def LOWER(self,first): 
+
     778          return 'LOWER(%s)' % self.expand(first) 
+
     779   
+
     780 -    def UPPER(self,first): 
+
     781          return 'UPPER(%s)' % self.expand(first) 
+
     782   
+
     783 -    def EXTRACT(self,first,what): 
+
     784          return "EXTRACT(%s FROM %s)" % (what, self.expand(first)) 
+
     785   
+
     786 -    def AGGREGATE(self,first,what): 
+
     787          return "%s(%s)" % (what,self.expand(first)) 
+
     788   
+
     789 -    def JOIN(self): 
+
     790          return 'JOIN' 
+
     791   
+
     792 -    def LEFT_JOIN(self): 
+
     793          return 'LEFT JOIN' 
+
     794   
+
     795 -    def RANDOM(self): 
+
     796          return 'Random()' 
+
     797   
+
     798 -    def NOT_NULL(self,default,field_type): 
+
     799          return 'NOT NULL DEFAULT %s' % self.represent(default,field_type) 
+
     800   
+
     801 -    def COALESCE_ZERO(self,first): 
+
     802          return 'COALESCE(%s,0)' % self.expand(first) 
+
     803   
+
     804 -    def ALLOW_NULL(self): 
+
     805          return '' 
+
     806   
+
     807 -    def SUBSTRING(self,field,parameters): 
+
     808          return 'SUBSTR(%s,%s,%s)' % (self.expand(field), parameters[0], parameters[1]) 
+
     809   
+
     810 -    def PRIMARY_KEY(self,key): 
+
     811          return 'PRIMARY KEY(%s)' % key 
+
     812   
+
     813 -    def _drop(self,table,mode): 
+
     814          return ['DROP TABLE %s;' % table] 
+
     815   
+
     816 -    def drop(self, table, mode=''): 
+
     817          if table._dbt: 
+ 818              logfile = self.file_open(table._loggername, 'a') 
+ 819          queries = self._drop(table, mode) 
+ 820          for query in queries: 
+ 821              if table._dbt: 
+ 822                  logfile.write(query + '\n') 
+ 823              self.execute(query) 
+ 824          table._db.commit() 
+ 825          del table._db[table._tablename] 
+ 826          del table._db.tables[table._db.tables.index(table._tablename)] 
+ 827          table._db._update_referenced_by(table._tablename) 
+ 828          if table._dbt: 
+ 829              self.file_delete(table._dbt) 
+ 830              logfile.write('success!\n') 
+
     831   
+
     832 -    def _insert(self,table,fields): 
+
     833          keys = ','.join(f.name for f,v in fields) 
+ 834          values = ','.join(self.expand(v,f.type) for f,v in fields) 
+ 835          return 'INSERT INTO %s(%s) VALUES (%s);' % (table, keys, values) 
+
     836   
+
     837 -    def insert(self,table,fields): 
+
     838          query = self._insert(table,fields) 
+ 839          try: 
+ 840              self.execute(query) 
+ 841          except Exception, e: 
+ 842              if isinstance(e,self.integrity_error_class()): 
+ 843                  return None 
+ 844              raise e 
+ 845          if hasattr(table,'_primarykey'): 
+ 846              return dict([(k[0].name, k[1]) for k in fields \ 
+ 847                               if k[0].name in table._primarykey]) 
+ 848          id = self.lastrowid(table) 
+ 849          if not isinstance(id,int): 
+ 850              return id 
+ 851          rid = Reference(id) 
+ 852          (rid._table, rid._record) = (table, None) 
+ 853          return rid 
+
     854   
+
     855 -    def bulk_insert(self,table,items): 
+
     856          return [self.insert(table,item) for item in items] 
+
     857   
+
     858 -    def NOT(self,first): 
+
     859          return '(NOT %s)' % self.expand(first) 
+
     860   
+
     861 -    def AND(self,first,second): 
+
     862          return '(%s AND %s)' % (self.expand(first),self.expand(second)) 
+
     863   
+
     864 -    def OR(self,first,second): 
+
     865          return '(%s OR %s)' % (self.expand(first),self.expand(second)) 
+
     866   
+
     867 -    def BELONGS(self,first,second): 
+
     868          if isinstance(second,str): 
+ 869              return '(%s IN (%s))' % (self.expand(first),second[:-1]) 
+ 870          elif second==[] or second==(): 
+ 871              return '(0)' 
+ 872          items =','.join(self.expand(item,first.type) for item in second) 
+ 873          return '(%s IN (%s))' % (self.expand(first),items) 
+
     874   
+
     875 -    def LIKE(self,first,second): 
+
     876          return '(%s LIKE %s)' % (self.expand(first),self.expand(second,'string')) 
+
     877   
+
     878 -    def STARTSWITH(self,first,second): 
+
     879          return '(%s LIKE %s)' % (self.expand(first),self.expand(second+'%','string')) 
+
     880   
+
     881 -    def ENDSWITH(self,first,second): 
+
     882          return '(%s LIKE %s)' % (self.expand(first),self.expand('%'+second,'string')) 
+
     883   
+
     884 -    def CONTAINS(self,first,second): 
+
     885          if first.type in ('string','text'): 
+ 886              key = '%'+str(second).replace('%','%%')+'%' 
+ 887          elif first.type.startswith('list:'): 
+ 888              key = '%|'+str(second).replace('|','||').replace('%','%%')+'|%' 
+ 889          return '(%s LIKE %s)' % (self.expand(first),self.expand(key,'string')) 
+
     890   
+
     891 -    def EQ(self,first,second=None): 
+
     892          if second is None: 
+ 893              return '(%s IS NULL)' % self.expand(first) 
+ 894          return '(%s = %s)' % (self.expand(first),self.expand(second,first.type)) 
+
     895   
+
     896 -    def NE(self,first,second=None): 
+
     897          if second is None: 
+ 898              return '(%s IS NOT NULL)' % self.expand(first) 
+ 899          return '(%s <> %s)' % (self.expand(first),self.expand(second,first.type)) 
+
     900   
+
     901 -    def LT(self,first,second=None): 
+
     902          return '(%s < %s)' % (self.expand(first),self.expand(second,first.type)) 
+
     903   
+
     904 -    def LE(self,first,second=None): 
+
     905          return '(%s <= %s)' % (self.expand(first),self.expand(second,first.type)) 
+
     906   
+
     907 -    def GT(self,first,second=None): 
+
     908          return '(%s > %s)' % (self.expand(first),self.expand(second,first.type)) 
+
     909   
+
     910 -    def GE(self,first,second=None): 
+
     911          return '(%s >= %s)' % (self.expand(first),self.expand(second,first.type)) 
+
     912   
+
     913 -    def ADD(self,first,second): 
+
     914          return '(%s + %s)' % (self.expand(first),self.expand(second,first.type)) 
+
     915   
+
     916 -    def SUB(self,first,second): 
+
     917          return '(%s - %s)' % (self.expand(first),self.expand(second,first.type)) 
+
     918   
+
     919 -    def MUL(self,first,second): 
+
     920          return '(%s * %s)' % (self.expand(first),self.expand(second,first.type)) 
+
     921   
+
     922 -    def DIV(self,first,second): 
+
     923          return '(%s / %s)' % (self.expand(first),self.expand(second,first.type)) 
+
     924   
+
     925 -    def MOD(self,first,second): 
+
     926          return '(%s %% %s)' % (self.expand(first),self.expand(second,first.type)) 
+
     927   
+
     928 -    def AS(self,first,second): 
+
     929          return '%s AS %s' % (self.expand(first),second) 
+
     930   
+
     931 -    def ON(self,first,second): 
+
     932          return '%s ON %s' % (self.expand(first),self.expand(second)) 
+
     933   
+
     934 -    def INVERT(self,first): 
+
     935          return '%s DESC' % self.expand(first) 
+
     936   
+
     937 -    def COMMA(self,first,second): 
+
     938          return '%s, %s' % (self.expand(first),self.expand(second)) 
+
     939   
+
     940 -    def expand(self,expression,field_type=None): 
+
     941          if isinstance(expression,Field): 
+ 942              return str(expression) 
+ 943          elif isinstance(expression, (Expression, Query)): 
+ 944              if not expression.second is None: 
+ 945                  return expression.op(expression.first, expression.second) 
+ 946              elif not expression.first is None: 
+ 947                  return expression.op(expression.first) 
+ 948              else: 
+ 949                  return expression.op() 
+ 950          elif field_type: 
+ 951              return self.represent(expression,field_type) 
+ 952          elif isinstance(expression,(list,tuple)): 
+ 953              return ','.join([self.represent(item,field_type) for item in expression]) 
+ 954          else: 
+ 955              return str(expression) 
+
     956   
+
     957 -    def alias(self,table,alias): 
+
     958          """ 
+ 959          given a table object, makes a new table object 
+ 960          with alias name. 
+ 961          """ 
+ 962          other = copy.copy(table) 
+ 963          other['_ot'] = other._tablename 
+ 964          other['ALL'] = SQLALL(other) 
+ 965          other['_tablename'] = alias 
+ 966          for fieldname in other.fields: 
+ 967              other[fieldname] = copy.copy(other[fieldname]) 
+ 968              other[fieldname]._tablename = alias 
+ 969              other[fieldname].tablename = alias 
+ 970              other[fieldname].table = other 
+ 971          table._db[alias] = other 
+ 972          return other 
+
     973   
+
     974 -    def _truncate(self,table,mode = ''): 
+
     975          tablename = table._tablename 
+ 976          return ['TRUNCATE TABLE %s %s;' % (tablename, mode or '')] 
+
     977   
+
     978 -    def truncate(self,table,mode= ' '): 
+
     979          # Prepare functions "write_to_logfile" and "close_logfile" 
+ 980          if table._dbt: 
+ 981              logfile = self.file_open(table._loggername, 'a') 
+ 982          else: 
+ 983              class Logfile(object): 
+ 984                  def write(self, value): 
+ 985                      pass 
+
     986                  def close(self): 
+ 987                      pass 
+ 988              logfile = Logfile() 
+ 989   
+ 990          try: 
+ 991              queries = table._db._adapter._truncate(table, mode) 
+ 992              for query in queries: 
+ 993                  logfile.write(query + '\n') 
+ 994                  self.execute(query) 
+ 995              table._db.commit() 
+ 996              logfile.write('success!\n') 
+ 997          finally: 
+ 998              logfile.close() 
+ 999   
+
    1000 -    def _update(self,tablename,query,fields): 
+
    1001          if query: 
+1002              sql_w = ' WHERE ' + self.expand(query) 
+1003          else: 
+1004              sql_w = '' 
+1005          sql_v = ','.join(['%s=%s' % (field.name, self.expand(value,field.type)) for (field,value) in fields]) 
+1006          return 'UPDATE %s SET %s%s;' % (tablename, sql_v, sql_w) 
+
    1007   
+
    1008 -    def update(self,tablename,query,fields): 
+
    1009          sql = self._update(tablename,query,fields) 
+1010          self.execute(sql) 
+1011          try: 
+1012              return self.cursor.rowcount 
+1013          except: 
+1014              return None 
+
    1015   
+
    1016 -    def _delete(self,tablename, query): 
+
    1017          if query: 
+1018              sql_w = ' WHERE ' + self.expand(query) 
+1019          else: 
+1020              sql_w = '' 
+1021          return 'DELETE FROM %s%s;' % (tablename, sql_w) 
+
    1022   
+
    1023 -    def delete(self,tablename,query): 
+
    1024          sql = self._delete(tablename,query) 
+1025          ### special code to handle CASCADE in SQLite 
+1026          db = self.db 
+1027          table = db[tablename] 
+1028          if self.dbengine=='sqlite' and table._referenced_by: 
+1029              deleted = [x[table._id.name] for x in db(query).select(table._id)] 
+1030          ### end special code to handle CASCADE in SQLite 
+1031          self.execute(sql) 
+1032          try: 
+1033              counter = self.cursor.rowcount 
+1034          except: 
+1035              counter =  None 
+1036          ### special code to handle CASCADE in SQLite 
+1037          if self.dbengine=='sqlite' and counter: 
+1038              for tablename,fieldname in table._referenced_by: 
+1039                  f = db[tablename][fieldname] 
+1040                  if f.type=='reference '+table._tablename and f.ondelete=='CASCADE': 
+1041                      db(db[tablename][fieldname].belongs(deleted)).delete() 
+1042          ### end special code to handle CASCADE in SQLite 
+1043          return counter 
+
    1044   
+
    1045 -    def get_table(self,query): 
+
    1046          tablenames = self.tables(query) 
+1047          if len(tablenames)==1: 
+1048              return tablenames[0] 
+1049          elif len(tablenames)<1: 
+1050              raise RuntimeError, "No table selected" 
+1051          else: 
+1052              raise RuntimeError, "Too many tables selected" 
+
    1053   
+
    1054 -    def _select(self, query, fields, attributes): 
+
    1055          for key in set(attributes.keys())-set(('orderby','groupby','limitby', 
+1056                                                 'required','cache','left', 
+1057                                                 'distinct','having', 'join')): 
+1058              raise SyntaxError, 'invalid select attribute: %s' % key 
+1059          # ## if not fields specified take them all from the requested tables 
+1060          new_fields = [] 
+1061          for item in fields: 
+1062              if isinstance(item,SQLALL): 
+1063                  new_fields += item.table 
+1064              else: 
+1065                  new_fields.append(item) 
+1066          fields = new_fields 
+1067          tablenames = self.tables(query) 
+1068          query = self.filter_tenant(query,tablenames) 
+1069          if not fields: 
+1070              for table in tablenames: 
+1071                  for field in self.db[table]: 
+1072                      fields.append(field) 
+1073          else: 
+1074              for field in fields: 
+1075                  if isinstance(field,basestring) and table_field.match(field): 
+1076                      tn,fn = field.split('.') 
+1077                      field = self.db[tn][fn] 
+1078                  for tablename in self.tables(field): 
+1079                      if not tablename in tablenames: 
+1080                          tablenames.append(tablename) 
+1081          if len(tablenames) < 1: 
+1082              raise SyntaxError, 'Set: no tables selected' 
+1083          sql_f = ', '.join(map(self.expand,fields)) 
+1084          self._colnames = [c.strip() for c in sql_f.split(', ')] 
+1085          if query: 
+1086              sql_w = ' WHERE ' + self.expand(query) 
+1087          else: 
+1088              sql_w = '' 
+1089          sql_o = '' 
+1090          sql_s = '' 
+1091          left = attributes.get('left', False) 
+1092          inner_join = attributes.get('join', False) 
+1093          distinct = attributes.get('distinct', False) 
+1094          groupby = attributes.get('groupby', False) 
+1095          orderby = attributes.get('orderby', False) 
+1096          having = attributes.get('having', False) 
+1097          limitby = attributes.get('limitby', False) 
+1098          if distinct is True: 
+1099              sql_s += 'DISTINCT' 
+1100          elif distinct: 
+1101              sql_s += 'DISTINCT ON (%s)' % distinct 
+1102          if inner_join: 
+1103              icommand = self.JOIN() 
+1104              if not isinstance(inner_join, (tuple, list)): 
+1105                  inner_join = [inner_join] 
+1106              ijoint = [t._tablename for t in inner_join if not isinstance(t,Expression)] 
+1107              ijoinon = [t for t in inner_join if isinstance(t, Expression)] 
+1108              ijoinont = [t.first._tablename for t in ijoinon] 
+1109              iexcluded = [t for t in tablenames if not t in ijoint + ijoinont] 
+1110          if left: 
+1111              join = attributes['left'] 
+1112              command = self.LEFT_JOIN() 
+1113              if not isinstance(join, (tuple, list)): 
+1114                  join = [join] 
+1115              joint = [t._tablename for t in join if not isinstance(t,Expression)] 
+1116              joinon = [t for t in join if isinstance(t, Expression)] 
+1117              #patch join+left patch (solves problem with ordering in left joins) 
+1118              tables_to_merge={} 
+1119              [tables_to_merge.update(dict.fromkeys(self.tables(t))) for t in joinon] 
+1120              joinont = [t.first._tablename for t in joinon] 
+1121              [tables_to_merge.pop(t) for t in joinont if t in tables_to_merge] 
+1122              important_tablenames = joint + joinont + tables_to_merge.keys() 
+1123              excluded = [t for t in tablenames if not t in important_tablenames ] 
+1124          def alias(t): 
+1125              return str(self.db[t]) 
+
    1126          if inner_join and not left: 
+1127              sql_t = ', '.join(alias(t) for t in iexcluded) 
+1128              for t in ijoinon: 
+1129                  sql_t += ' %s %s' % (icommand, str(t)) 
+1130          elif not inner_join and left: 
+1131              sql_t = ', '.join([alias(t) for t in excluded + tables_to_merge.keys()]) 
+1132              if joint: 
+1133                  sql_t += ' %s %s' % (command, ','.join([t for t in joint])) 
+1134              for t in joinon: 
+1135                  sql_t += ' %s %s' % (command, str(t)) 
+1136          elif inner_join and left: 
+1137              sql_t = ','.join([alias(t) for t in excluded + \ 
+1138                                    tables_to_merge.keys() if t in iexcluded ]) 
+1139              for t in ijoinon: 
+1140                  sql_t += ' %s %s' % (icommand, str(t)) 
+1141              if joint: 
+1142                  sql_t += ' %s %s' % (command, ','.join([t for t in joint])) 
+1143              for t in joinon: 
+1144                  sql_t += ' %s %s' % (command, str(t)) 
+1145          else: 
+1146              sql_t = ', '.join(alias(t) for t in tablenames) 
+1147          if groupby: 
+1148              if isinstance(groupby, (list, tuple)): 
+1149                  groupby = xorify(groupby) 
+1150              sql_o += ' GROUP BY %s' % self.expand(groupby) 
+1151              if having: 
+1152                  sql_o += ' HAVING %s' % attributes['having'] 
+1153          if orderby: 
+1154              if isinstance(orderby, (list, tuple)): 
+1155                  orderby = xorify(orderby) 
+1156              if str(orderby) == '<random>': 
+1157                  sql_o += ' ORDER BY %s' % self.RANDOM() 
+1158              else: 
+1159                  sql_o += ' ORDER BY %s' % self.expand(orderby) 
+1160          if limitby: 
+1161              if not orderby and tablenames: 
+1162                  sql_o += ' ORDER BY %s' % ', '.join(['%s.%s'%(t,x) for t in tablenames for x in ((hasattr(self.db[t],'_primarykey') and self.db[t]._primarykey) or [self.db[t]._id.name])]) 
+1163              # oracle does not support limitby 
+1164          return self.select_limitby(sql_s, sql_f, sql_t, sql_w, sql_o, limitby) 
+1165   
+
    1166 -    def select_limitby(self, sql_s, sql_f, sql_t, sql_w, sql_o, limitby): 
+
    1167          if limitby: 
+1168              (lmin, lmax) = limitby 
+1169              sql_o += ' LIMIT %i OFFSET %i' % (lmax - lmin, lmin) 
+1170          return 'SELECT %s %s FROM %s%s%s;' % (sql_s, sql_f, sql_t, sql_w, sql_o) 
+
    1171   
+
    1172 -    def select(self,query,fields,attributes): 
+
    1173          """ 
+1174          Always returns a Rows object, even if it may be empty 
+1175          """ 
+1176          def response(sql): 
+1177              self.execute(sql) 
+1178              return self.cursor.fetchall() 
+
    1179          sql = self._select(query,fields,attributes) 
+1180          if attributes.get('cache', None): 
+1181              (cache_model, time_expire) = attributes['cache'] 
+1182              del attributes['cache'] 
+1183              key = self.uri + '/' + sql 
+1184              key = (key<=200) and key or hashlib.md5(key).hexdigest() 
+1185              rows = cache_model(key, lambda: response(sql), time_expire) 
+1186          else: 
+1187              rows = response(sql) 
+1188          if isinstance(rows,tuple): 
+1189              rows = list(rows) 
+1190          limitby = attributes.get('limitby',None) or (0,) 
+1191          rows = self.rowslice(rows,limitby[0],None) 
+1192          return self.parse(rows,self._colnames) 
+1193   
+
    1194 -    def _count(self,query,distinct=None): 
+
    1195          tablenames = self.tables(query) 
+1196          if query: 
+1197              sql_w = ' WHERE ' + self.expand(query) 
+1198          else: 
+1199              sql_w = '' 
+1200          sql_t = ','.join(tablenames) 
+1201          if distinct: 
+1202              if isinstance(distinct,(list,tuple)): 
+1203                  distinct = xorify(distinct) 
+1204              sql_d = self.expand(distinct) 
+1205              return 'SELECT count(DISTINCT %s) FROM %s%s' % (sql_d, sql_t, sql_w) 
+1206          return 'SELECT count(*) FROM %s%s' % (sql_t, sql_w) 
+
    1207   
+
    1208 -    def count(self,query,distinct=None): 
+
    1209          self.execute(self._count(query,distinct)) 
+1210          return self.cursor.fetchone()[0] 
+
    1211   
+1212   
+
    1213 -    def tables(self,query): 
+
    1214          tables = set() 
+1215          if isinstance(query, Field): 
+1216              tables.add(query.tablename) 
+1217          elif isinstance(query, (Expression, Query)): 
+1218              if query.first!=None: 
+1219                  tables = tables.union(self.tables(query.first)) 
+1220              if query.second!=None: 
+1221                  tables = tables.union(self.tables(query.second)) 
+1222          return list(tables) 
+
    1223   
+
    1224 -    def commit(self): 
+
    1225          return self.connection.commit() 
+
    1226   
+
    1227 -    def rollback(self): 
+
    1228          return self.connection.rollback() 
+
    1229   
+
    1230 -    def close(self): 
+
    1231          return self.connection.close() 
+
    1232   
+
    1233 -    def distributed_transaction_begin(self,key): 
+
    1234          return 
+
    1235   
+
    1236 -    def prepare(self,key): 
+
    1237          self.connection.prepare() 
+
    1238   
+
    1239 -    def commit_prepared(self,key): 
+
    1240          self.connection.commit() 
+
    1241   
+
    1242 -    def rollback_prepared(self,key): 
+
    1243          self.connection.rollback() 
+
    1244   
+
    1245 -    def concat_add(self,table): 
+
    1246          return ', ADD ' 
+
    1247   
+
    1248 -    def constraint_name(self, table, fieldname): 
+
    1249          return '%s_%s__constraint' % (table,fieldname) 
+
    1250   
+
    1251 -    def create_sequence_and_triggers(self, query, table, **args): 
+
    1252          self.execute(query) 
+
    1253   
+
    1254 -    def log_execute(self,*a,**b): 
+
    1255          self.db._lastsql = a[0] 
+1256          t0 = time.time() 
+1257          ret = self.cursor.execute(*a,**b) 
+1258          self.db._timings.append((a[0],time.time()-t0)) 
+1259          return ret 
+
    1260   
+
    1261 -    def execute(self,*a,**b): 
+
    1262          return self.log_execute(*a, **b) 
+
    1263   
+
    1264 -    def represent(self, obj, fieldtype): 
+
    1265          if isinstance(obj,CALLABLETYPES): 
+1266              obj = obj() 
+1267          if isinstance(fieldtype, SQLCustomType): 
+1268              return fieldtype.encoder(obj) 
+1269          if isinstance(obj, (Expression, Field)): 
+1270              return str(obj) 
+1271          if fieldtype.startswith('list:'): 
+1272              if not obj: 
+1273                  obj = [] 
+1274              if not isinstance(obj, (list, tuple)): 
+1275                  obj = [obj] 
+1276          if isinstance(obj, (list, tuple)): 
+1277              obj = bar_encode(obj) 
+1278          if obj is None: 
+1279              return 'NULL' 
+1280          if obj == '' and not fieldtype[:2] in ['st', 'te', 'pa', 'up']: 
+1281              return 'NULL' 
+1282          r = self.represent_exceptions(obj,fieldtype) 
+1283          if r != None: 
+1284              return r 
+1285          if fieldtype == 'boolean': 
+1286              if obj and not str(obj)[:1].upper() in ['F', '0']: 
+1287                  return "'T'" 
+1288              else: 
+1289                  return "'F'" 
+1290          if fieldtype == 'id' or fieldtype == 'integer': 
+1291              return str(int(obj)) 
+1292          if fieldtype.startswith('decimal'): 
+1293              return str(obj) 
+1294          elif fieldtype.startswith('reference'): # reference 
+1295              if fieldtype.find('.')>0: 
+1296                  return repr(obj) 
+1297              elif isinstance(obj, (Row, Reference)): 
+1298                  return str(obj['id']) 
+1299              return str(int(obj)) 
+1300          elif fieldtype == 'double': 
+1301              return repr(float(obj)) 
+1302          if isinstance(obj, unicode): 
+1303              obj = obj.encode(self.db_codec) 
+1304          if fieldtype == 'blob': 
+1305              obj = base64.b64encode(str(obj)) 
+1306          elif fieldtype == 'date': 
+1307              if isinstance(obj, (datetime.date, datetime.datetime)): 
+1308                  obj = obj.isoformat()[:10] 
+1309              else: 
+1310                  obj = str(obj) 
+1311          elif fieldtype == 'datetime': 
+1312              if isinstance(obj, datetime.datetime): 
+1313                  obj = obj.isoformat()[:19].replace('T',' ') 
+1314              elif isinstance(obj, datetime.date): 
+1315                  obj = obj.isoformat()[:10]+' 00:00:00' 
+1316              else: 
+1317                  obj = str(obj) 
+1318          elif fieldtype == 'time': 
+1319              if isinstance(obj, datetime.time): 
+1320                  obj = obj.isoformat()[:10] 
+1321              else: 
+1322                  obj = str(obj) 
+1323          if not isinstance(obj,str): 
+1324              obj = str(obj) 
+1325          try: 
+1326              obj.decode(self.db_codec) 
+1327          except: 
+1328              obj = obj.decode('latin1').encode(self.db_codec) 
+1329          return "'%s'" % obj.replace("'", "''") 
+
    1330   
+
    1331 -    def represent_exceptions(self, obj, fieldtype): 
+
    1332          return None 
+
    1333   
+
    1334 -    def lastrowid(self,table): 
+
    1335          return None 
+
    1336   
+
    1337 -    def integrity_error_class(self): 
+
    1338          return type(None) 
+
    1339   
+
    1340 -    def rowslice(self,rows,minimum=0,maximum=None): 
+
    1341          """ by default this function does nothing, overload when db does not do slicing """ 
+1342          return rows 
+
    1343   
+
    1344 -    def parse(self, rows, colnames, blob_decode=True): 
+
    1345          db = self.db 
+1346          virtualtables = [] 
+1347          new_rows = [] 
+1348          for (i,row) in enumerate(rows): 
+1349              new_row = Row() 
+1350              for j,colname in enumerate(colnames): 
+1351                  value = row[j] 
+1352                  if not table_field.match(colnames[j]): 
+1353                      if not '_extra' in new_row: 
+1354                          new_row['_extra'] = Row() 
+1355                      new_row['_extra'][colnames[j]] = value 
+1356                      select_as_parser = re.compile("\s+AS\s+(\S+)") 
+1357                      new_column_name = select_as_parser.search(colnames[j]) 
+1358                      if not new_column_name is None: 
+1359                          column_name = new_column_name.groups(0) 
+1360                          setattr(new_row,column_name[0],value) 
+1361                      continue 
+1362                  (tablename, fieldname) = colname.split('.') 
+1363                  table = db[tablename] 
+1364                  field = table[fieldname] 
+1365                  field_type = field.type 
+1366                  if field.type != 'blob' and isinstance(value, str): 
+1367                      try: 
+1368                          value = value.decode(db._db_codec) 
+1369                      except Exception: 
+1370                          pass 
+1371                  if isinstance(value, unicode): 
+1372                      value = value.encode('utf-8') 
+1373                  if not tablename in new_row: 
+1374                      colset = new_row[tablename] = Row() 
+1375                      if tablename not in virtualtables: 
+1376                          virtualtables.append(tablename) 
+1377                  else: 
+1378                      colset = new_row[tablename] 
+1379   
+1380                  if isinstance(field_type, SQLCustomType): 
+1381                      colset[fieldname] = field_type.decoder(value) 
+1382                      # field_type = field_type.type 
+1383                  elif not isinstance(field_type, str) or value is None: 
+1384                      colset[fieldname] = value 
+1385                  elif isinstance(field_type, str) and \ 
+1386                          field_type.startswith('reference'): 
+1387                      referee = field_type[10:].strip() 
+1388                      if not '.' in referee: 
+1389                          colset[fieldname] = rid = Reference(value) 
+1390                          (rid._table, rid._record) = (db[referee], None) 
+1391                      else: ### reference not by id 
+1392                          colset[fieldname] = value 
+1393                  elif field_type == 'boolean': 
+1394                      if value == True or str(value)[:1].lower() == 't': 
+1395                          colset[fieldname] = True 
+1396                      else: 
+1397                          colset[fieldname] = False 
+1398                  elif field_type == 'date' \ 
+1399                          and (not isinstance(value, datetime.date)\ 
+1400                                   or isinstance(value, datetime.datetime)): 
+1401                      (y, m, d) = map(int, str(value)[:10].strip().split('-')) 
+1402                      colset[fieldname] = datetime.date(y, m, d) 
+1403                  elif field_type == 'time' \ 
+1404                          and not isinstance(value, datetime.time): 
+1405                      time_items = map(int,str(value)[:8].strip().split(':')[:3]) 
+1406                      if len(time_items) == 3: 
+1407                          (h, mi, s) = time_items 
+1408                      else: 
+1409                          (h, mi, s) = time_items + [0] 
+1410                      colset[fieldname] = datetime.time(h, mi, s) 
+1411                  elif field_type == 'datetime'\ 
+1412                          and not isinstance(value, datetime.datetime): 
+1413                      (y, m, d) = map(int,str(value)[:10].strip().split('-')) 
+1414                      time_items = map(int,str(value)[11:19].strip().split(':')[:3]) 
+1415                      if len(time_items) == 3: 
+1416                          (h, mi, s) = time_items 
+1417                      else: 
+1418                          (h, mi, s) = time_items + [0] 
+1419                      colset[fieldname] = datetime.datetime(y, m, d, h, mi, s) 
+1420                  elif field_type == 'blob' and blob_decode: 
+1421                      colset[fieldname] = base64.b64decode(str(value)) 
+1422                  elif field_type.startswith('decimal'): 
+1423                      decimals = int(field_type[8:-1].split(',')[-1]) 
+1424                      if self.dbengine == 'sqlite': 
+1425                          value = ('%.' + str(decimals) + 'f') % value 
+1426                      if not isinstance(value, decimal.Decimal): 
+1427                          value = decimal.Decimal(str(value)) 
+1428                      colset[fieldname] = value 
+1429                  elif field_type.startswith('list:integer'): 
+1430                      if not self.dbengine=='google:datastore': 
+1431                          colset[fieldname] = bar_decode_integer(value) 
+1432                      else: 
+1433                          colset[fieldname] = value 
+1434                  elif field_type.startswith('list:reference'): 
+1435                      if not self.dbengine=='google:datastore': 
+1436                          colset[fieldname] = bar_decode_integer(value) 
+1437                      else: 
+1438                          colset[fieldname] = value 
+1439                  elif field_type.startswith('list:string'): 
+1440                      if not self.dbengine=='google:datastore': 
+1441                          colset[fieldname] = bar_decode_string(value) 
+1442                      else: 
+1443                          colset[fieldname] = value 
+1444                  else: 
+1445                      colset[fieldname] = value 
+1446                  if field_type == 'id': 
+1447                      id = colset[field.name] 
+1448                      colset.update_record = lambda _ = (colset, table, id), **a: update_record(_, a) 
+1449                      colset.delete_record = lambda t = table, i = id: t._db(t._id==i).delete() 
+1450                      for (referee_table, referee_name) in \ 
+1451                              table._referenced_by: 
+1452                          s = db[referee_table][referee_name] 
+1453                          if not referee_table in colset: 
+1454                              # for backward compatibility 
+1455                              colset[referee_table] = Set(db, s == id) 
+1456                          ### add new feature? 
+1457                          ### colset[referee_table+'_by_'+refree_name] = Set(db, s == id) 
+1458                      colset['id'] = id 
+1459              new_rows.append(new_row) 
+1460          rowsobj = Rows(db, new_rows, colnames, rawrows=rows) 
+1461          for tablename in virtualtables: 
+1462              for item in db[tablename].virtualfields: 
+1463                  try: 
+1464                      rowsobj = rowsobj.setvirtualfields(**{tablename:item}) 
+1465                  except KeyError: 
+1466                      # to avoid breaking virtualfields when partial select 
+1467                      pass 
+1468          return rowsobj 
+
    1469   
+
    1470 -    def filter_tenant(self,query,tablenames): 
+
    1471          fieldname = self.db._request_tenant 
+1472          for tablename in tablenames: 
+1473              table = self.db[tablename] 
+1474              if fieldname in table: 
+1475                  default = table[fieldname].default 
+1476                  if default!=None: 
+1477                      query = query&(table[fieldname]==default) 
+1478          return query 
+
    1479   
+1480  ################################################################################### 
+1481  # List of all the available adapters, they all extend BaseAdapter 
+1482  ################################################################################### 
+1483   
+
    1484 -class SQLiteAdapter(BaseAdapter): 
+
    1485   
+1486      driver = globals().get('sqlite3',None) 
+1487   
+
    1488 -    def EXTRACT(self,field,what): 
+
    1489          return "web2py_extract('%s',%s)" % (what,self.expand(field)) 
+
    1490   
+1491      @staticmethod 
+
    1492 -    def web2py_extract(lookup, s): 
+
    1493          table = { 
+1494              'year': (0, 4), 
+1495              'month': (5, 7), 
+1496              'day': (8, 10), 
+1497              'hour': (11, 13), 
+1498              'minute': (14, 16), 
+1499              'second': (17, 19), 
+1500              } 
+1501          try: 
+1502              (i, j) = table[lookup] 
+1503              return int(s[i:j]) 
+1504          except: 
+1505              return None 
+
    1506   
+
    1507 -    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8', 
+1508                   credential_decoder=lambda x:x, driver_args={}, 
+1509                      adapter_args={}): 
+
    1510          self.db = db 
+1511          self.dbengine = "sqlite" 
+1512          self.uri = uri 
+1513          self.pool_size = pool_size 
+1514          self.folder = folder 
+1515          self.db_codec = db_codec 
+1516          self.find_or_make_work_folder() 
+1517          path_encoding = sys.getfilesystemencoding() or locale.getdefaultlocale()[1] or 'utf8' 
+1518          if uri.startswith('sqlite:memory'): 
+1519              dbpath = ':memory:' 
+1520          else: 
+1521              dbpath = uri.split('://')[1] 
+1522              if dbpath[0] != '/': 
+1523                  dbpath = os.path.join(self.folder.decode(path_encoding).encode('utf8'),dbpath) 
+1524          if not 'check_same_thread' in driver_args: 
+1525              driver_args['check_same_thread'] = False 
+1526          def connect(dbpath=dbpath, driver_args=driver_args): 
+1527              return self.driver.Connection(dbpath, **driver_args) 
+
    1528          self.pool_connection(connect) 
+1529          self.cursor = self.connection.cursor() 
+1530          self.connection.create_function('web2py_extract', 2, SQLiteAdapter.web2py_extract) 
+
    1531   
+
    1532 -    def _truncate(self,table,mode = ''): 
+
    1533          tablename = table._tablename 
+1534          return ['DELETE FROM %s;' % tablename, 
+1535                  "DELETE FROM sqlite_sequence WHERE name='%s';" % tablename] 
+
    1536   
+
    1537 -    def lastrowid(self,table): 
+
    1538          return self.cursor.lastrowid 
+
    1539   
+1540   
+
    1541 -class JDBCSQLiteAdapter(SQLiteAdapter): 
+
    1542   
+1543      driver = globals().get('zxJDBC',None) 
+1544   
+
    1545 -    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8', 
+1546                   credential_decoder=lambda x:x, driver_args={}, 
+1547                      adapter_args={}): 
+
    1548          self.db = db 
+1549          self.dbengine = "sqlite" 
+1550          self.uri = uri 
+1551          self.pool_size = pool_size 
+1552          self.folder = folder 
+1553          self.db_codec = db_codec 
+1554          self.find_or_make_work_folder() 
+1555          path_encoding = sys.getfilesystemencoding() or locale.getdefaultlocale()[1] or 'utf8' 
+1556          if uri.startswith('sqlite:memory'): 
+1557              dbpath = ':memory:' 
+1558          else: 
+1559              dbpath = uri.split('://')[1] 
+1560              if dbpath[0] != '/': 
+1561                  dbpath = os.path.join(self.folder.decode(path_encoding).encode('utf8'),dbpath) 
+1562          def connect(dbpath=dbpath,driver_args=driver_args): 
+1563              return self.driver.connect(java.sql.DriverManager.getConnection('jdbc:sqlite:'+dbpath),**driver_args) 
+
    1564          self.pool_connection(connect) 
+1565          self.cursor = self.connection.cursor() 
+
    1566          # FIXME http://www.zentus.com/sqlitejdbc/custom_functions.html for UDFs 
+1567          # self.connection.create_function('web2py_extract', 2, SQLiteAdapter.web2py_extract) 
+1568   
+
    1569 -    def execute(self,a): 
+
    1570          return self.log_execute(a[:-1]) 
+
    1571   
+1572   
+
    1573 -class MySQLAdapter(BaseAdapter): 
+
    1574   
+1575      driver = globals().get('pymysql',None) 
+1576      maxcharlength = 255 
+1577      commit_on_alter_table = True 
+1578      support_distributed_transaction = True 
+1579      types = { 
+1580          'boolean': 'CHAR(1)', 
+1581          'string': 'VARCHAR(%(length)s)', 
+1582          'text': 'LONGTEXT', 
+1583          'password': 'VARCHAR(%(length)s)', 
+1584          'blob': 'LONGBLOB', 
+1585          'upload': 'VARCHAR(%(length)s)', 
+1586          'integer': 'INT', 
+1587          'double': 'DOUBLE', 
+1588          'decimal': 'NUMERIC(%(precision)s,%(scale)s)', 
+1589          'date': 'DATE', 
+1590          'time': 'TIME', 
+1591          'datetime': 'DATETIME', 
+1592          'id': 'INT AUTO_INCREMENT NOT NULL', 
+1593          'reference': 'INT, INDEX %(field_name)s__idx (%(field_name)s), FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s', 
+1594          'list:integer': 'LONGTEXT', 
+1595          'list:string': 'LONGTEXT', 
+1596          'list:reference': 'LONGTEXT', 
+1597          } 
+1598   
+
    1599 -    def RANDOM(self): 
+
    1600          return 'RAND()' 
+
    1601   
+
    1602 -    def SUBSTRING(self,field,parameters): 
+
    1603          return 'SUBSTRING(%s,%s,%s)' % (self.expand(field), parameters[0], parameters[1]) 
+
    1604   
+
    1605 -    def _drop(self,table,mode): 
+
    1606          # breaks db integrity but without this mysql does not drop table 
+1607          return ['SET FOREIGN_KEY_CHECKS=0;','DROP TABLE %s;' % table,'SET FOREIGN_KEY_CHECKS=1;'] 
+
    1608   
+
    1609 -    def distributed_transaction_begin(self,key): 
+
    1610          self.execute('XA START;') 
+
    1611   
+
    1612 -    def prepare(self,key): 
+
    1613          self.execute("XA END;") 
+1614          self.execute("XA PREPARE;") 
+
    1615   
+
    1616 -    def commit_prepared(self,ley): 
+
    1617          self.execute("XA COMMIT;") 
+
    1618   
+
    1619 -    def rollback_prepared(self,key): 
+
    1620          self.execute("XA ROLLBACK;") 
+
    1621   
+
    1622 -    def concat_add(self,table): 
+
    1623          return '; ALTER TABLE %s ADD ' % table 
+
    1624   
+
    1625 -    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8', 
+1626                   credential_decoder=lambda x:x, driver_args={}, 
+1627                      adapter_args={}): 
+
    1628          self.db = db 
+1629          self.dbengine = "mysql" 
+1630          self.uri = uri 
+1631          self.pool_size = pool_size 
+1632          self.folder = folder 
+1633          self.db_codec = db_codec 
+1634          self.find_or_make_work_folder() 
+1635          uri = uri.split('://')[1] 
+1636          m = re.compile('^(?P<user>[^:@]+)(\:(?P<password>[^@]*))?@(?P<host>[^\:/]+)(\:(?P<port>[0-9]+))?/(?P<db>[^?]+)(\?set_encoding=(?P<charset>\w+))?$').match(uri) 
+1637          if not m: 
+1638              raise SyntaxError, \ 
+1639                  "Invalid URI string in DAL: %s" % self.uri 
+1640          user = credential_decoder(m.group('user')) 
+1641          if not user: 
+1642              raise SyntaxError, 'User required' 
+1643          password = credential_decoder(m.group('password')) 
+1644          if not password: 
+1645              password = '' 
+1646          host = m.group('host') 
+1647          if not host: 
+1648              raise SyntaxError, 'Host name required' 
+1649          db = m.group('db') 
+1650          if not db: 
+1651              raise SyntaxError, 'Database name required' 
+1652          port = int(m.group('port') or '3306') 
+1653          charset = m.group('charset') or 'utf8' 
+1654          driver_args.update(dict(db=db, 
+1655                                  user=credential_decoder(user), 
+1656                                  passwd=credential_decoder(password), 
+1657                                  host=host, 
+1658                                  port=port, 
+1659                                  charset=charset)) 
+1660          def connect(driver_args=driver_args): 
+1661              return self.driver.connect(**driver_args) 
+
    1662          self.pool_connection(connect) 
+1663          self.cursor = self.connection.cursor() 
+1664          self.execute('SET FOREIGN_KEY_CHECKS=1;') 
+1665          self.execute("SET sql_mode='NO_BACKSLASH_ESCAPES';") 
+
    1666   
+
    1667 -    def lastrowid(self,table): 
+
    1668          self.execute('select last_insert_id();') 
+1669          return int(self.cursor.fetchone()[0]) 
+
    1670   
+1671   
+
    1672 -class PostgreSQLAdapter(BaseAdapter): 
+
    1673   
+1674      driver = globals().get('psycopg2',None) 
+1675   
+1676      support_distributed_transaction = True 
+1677      types = { 
+1678          'boolean': 'CHAR(1)', 
+1679          'string': 'VARCHAR(%(length)s)', 
+1680          'text': 'TEXT', 
+1681          'password': 'VARCHAR(%(length)s)', 
+1682          'blob': 'BYTEA', 
+1683          'upload': 'VARCHAR(%(length)s)', 
+1684          'integer': 'INTEGER', 
+1685          'double': 'FLOAT8', 
+1686          'decimal': 'NUMERIC(%(precision)s,%(scale)s)', 
+1687          'date': 'DATE', 
+1688          'time': 'TIME', 
+1689          'datetime': 'TIMESTAMP', 
+1690          'id': 'SERIAL PRIMARY KEY', 
+1691          'reference': 'INTEGER REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s', 
+1692          'list:integer': 'TEXT', 
+1693          'list:string': 'TEXT', 
+1694          'list:reference': 'TEXT', 
+1695          } 
+1696   
+
    1697 -    def sequence_name(self,table): 
+
    1698          return '%s_id_Seq' % table 
+
    1699   
+
    1700 -    def RANDOM(self): 
+
    1701          return 'RANDOM()' 
+
    1702   
+
    1703 -    def distributed_transaction_begin(self,key): 
+
    1704          return 
+
    1705   
+
    1706 -    def prepare(self,key): 
+
    1707          self.execute("PREPARE TRANSACTION '%s';" % key) 
+
    1708   
+
    1709 -    def commit_prepared(self,key): 
+
    1710          self.execute("COMMIT PREPARED '%s';" % key) 
+
    1711   
+
    1712 -    def rollback_prepared(self,key): 
+
    1713          self.execute("ROLLBACK PREPARED '%s';" % key) 
+
    1714   
+
    1715 -    def create_sequence_and_triggers(self, query, table, **args): 
+
    1716          # following lines should only be executed if table._sequence_name does not exist 
+1717          # self.execute('CREATE SEQUENCE %s;' % table._sequence_name) 
+1718          # self.execute("ALTER TABLE %s ALTER COLUMN %s SET DEFAULT NEXTVAL('%s');" \ 
+1719          #              % (table._tablename, table._fieldname, table._sequence_name)) 
+1720          self.execute(query) 
+
    1721   
+
    1722 -    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8', 
+1723                   credential_decoder=lambda x:x, driver_args={}, 
+1724                      adapter_args={}): 
+
    1725          self.db = db 
+1726          self.dbengine = "postgres" 
+1727          self.uri = uri 
+1728          self.pool_size = pool_size 
+1729          self.folder = folder 
+1730          self.db_codec = db_codec 
+1731          self.find_or_make_work_folder() 
+1732          uri = uri.split('://')[1] 
+1733          m = re.compile('^(?P<user>[^:@]+)(\:(?P<password>[^@]*))?@(?P<host>[^\:@/]+)(\:(?P<port>[0-9]+))?/(?P<db>[^\?]+)(\?sslmode=(?P<sslmode>.+))?$').match(uri) 
+1734          if not m: 
+1735              raise SyntaxError, "Invalid URI string in DAL" 
+1736          user = credential_decoder(m.group('user')) 
+1737          if not user: 
+1738              raise SyntaxError, 'User required' 
+1739          password = credential_decoder(m.group('password')) 
+1740          if not password: 
+1741              password = '' 
+1742          host = m.group('host') 
+1743          if not host: 
+1744              raise SyntaxError, 'Host name required' 
+1745          db = m.group('db') 
+1746          if not db: 
+1747              raise SyntaxError, 'Database name required' 
+1748          port = m.group('port') or '5432' 
+1749          sslmode = m.group('sslmode') 
+1750          if sslmode: 
+1751              msg = ("dbname='%s' user='%s' host='%s'" 
+1752                     "port=%s password='%s' sslmode='%s'") \ 
+1753                     % (db, user, host, port, password, sslmode) 
+1754          else: 
+1755              msg = ("dbname='%s' user='%s' host='%s'" 
+1756                     "port=%s password='%s'") \ 
+1757                     % (db, user, host, port, password) 
+1758          def connect(msg=msg,driver_args=driver_args): 
+1759              return self.driver.connect(msg,**driver_args) 
+
    1760          self.pool_connection(connect) 
+1761          self.connection.set_client_encoding('UTF8') 
+1762          self.cursor = self.connection.cursor() 
+1763          self.execute('BEGIN;') 
+1764          self.execute("SET CLIENT_ENCODING TO 'UNICODE';") 
+1765          self.execute("SET standard_conforming_strings=on;") 
+
    1766   
+
    1767 -    def lastrowid(self,table): 
+
    1768          self.execute("select currval('%s')" % table._sequence_name) 
+1769          return int(self.cursor.fetchone()[0]) 
+
    1770   
+
    1771 -    def LIKE(self,first,second): 
+
    1772          return '(%s ILIKE %s)' % (self.expand(first),self.expand(second,'string')) 
+
    1773   
+
    1774 -    def STARTSWITH(self,first,second): 
+
    1775          return '(%s ILIKE %s)' % (self.expand(first),self.expand(second+'%','string')) 
+
    1776   
+
    1777 -    def ENDSWITH(self,first,second): 
+
    1778          return '(%s ILIKE %s)' % (self.expand(first),self.expand('%'+second,'string')) 
+
    1779   
+
    1780 -    def CONTAINS(self,first,second): 
+
    1781          if first.type in ('string','text'): 
+1782              key = '%'+str(second).replace('%','%%')+'%' 
+1783          elif first.type.startswith('list:'): 
+1784              key = '%|'+str(second).replace('|','||').replace('%','%%')+'|%' 
+1785          return '(%s ILIKE %s)' % (self.expand(first),self.expand(key,'string')) 
+
    1786   
+
    1787 -class JDBCPostgreSQLAdapter(PostgreSQLAdapter): 
+
    1788   
+
    1789 -    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8', 
+1790                   credential_decoder=lambda x:x, driver_args={}, 
+1791                      adapter_args={}): 
+
    1792          self.db = db 
+1793          self.dbengine = "postgres" 
+1794          self.uri = uri 
+1795          self.pool_size = pool_size 
+1796          self.folder = folder 
+1797          self.db_codec = db_codec 
+1798          self.find_or_make_work_folder() 
+1799          uri = uri.split('://')[1] 
+1800          m = re.compile('^(?P<user>[^:@]+)(\:(?P<password>[^@]*))?@(?P<host>[^\:/]+)(\:(?P<port>[0-9]+))?/(?P<db>.+)$').match(uri) 
+1801          if not m: 
+1802              raise SyntaxError, "Invalid URI string in DAL" 
+1803          user = credential_decoder(m.group('user')) 
+1804          if not user: 
+1805              raise SyntaxError, 'User required' 
+1806          password = credential_decoder(m.group('password')) 
+1807          if not password: 
+1808              password = '' 
+1809          host = m.group('host') 
+1810          if not host: 
+1811              raise SyntaxError, 'Host name required' 
+1812          db = m.group('db') 
+1813          if not db: 
+1814              raise SyntaxError, 'Database name required' 
+1815          port = m.group('port') or '5432' 
+1816          msg = ('jdbc:postgresql://%s:%s/%s' % (host, port, db), user, password) 
+1817          def connect(msg=msg,driver_args=driver_args): 
+1818              return self.driver.connect(*msg,**driver_args) 
+
    1819          self.pool_connection(connect) 
+1820          self.connection.set_client_encoding('UTF8') 
+1821          self.cursor = self.connection.cursor() 
+1822          self.execute('BEGIN;') 
+1823          self.execute("SET CLIENT_ENCODING TO 'UNICODE';") 
+
    1824   
+1825   
+
    1826 -class OracleAdapter(BaseAdapter): 
+
    1827   
+1828      driver = globals().get('cx_Oracle',None) 
+1829   
+1830      commit_on_alter_table = False 
+1831      types = { 
+1832          'boolean': 'CHAR(1)', 
+1833          'string': 'VARCHAR2(%(length)s)', 
+1834          'text': 'CLOB', 
+1835          'password': 'VARCHAR2(%(length)s)', 
+1836          'blob': 'CLOB', 
+1837          'upload': 'VARCHAR2(%(length)s)', 
+1838          'integer': 'INT', 
+1839          'double': 'FLOAT', 
+1840          'decimal': 'NUMERIC(%(precision)s,%(scale)s)', 
+1841          'date': 'DATE', 
+1842          'time': 'CHAR(8)', 
+1843          'datetime': 'DATE', 
+1844          'id': 'NUMBER PRIMARY KEY', 
+1845          'reference': 'NUMBER, CONSTRAINT %(constraint_name)s FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s', 
+1846          'list:integer': 'CLOB', 
+1847          'list:string': 'CLOB', 
+1848          'list:reference': 'CLOB', 
+1849          } 
+1850   
+
    1851 -    def sequence_name(self,tablename): 
+
    1852          return '%s_sequence' % tablename 
+
    1853   
+
    1854 -    def trigger_name(self,tablename): 
+
    1855          return '%s_trigger' % tablename 
+
    1856   
+
    1857 -    def LEFT_JOIN(self): 
+
    1858          return 'LEFT OUTER JOIN' 
+
    1859   
+
    1860 -    def RANDOM(self): 
+
    1861          return 'dbms_random.value' 
+
    1862   
+
    1863 -    def NOT_NULL(self,default,field_type): 
+
    1864          return 'DEFAULT %s NOT NULL' % self.represent(default,field_type) 
+
    1865   
+
    1866 -    def _drop(self,table,mode): 
+
    1867          sequence_name = table._sequence_name 
+1868          return ['DROP TABLE %s %s;' % (table, mode), 'DROP SEQUENCE %s;' % sequence_name] 
+
    1869   
+
    1870 -    def select_limitby(self, sql_s, sql_f, sql_t, sql_w, sql_o, limitby): 
+
    1871          if limitby: 
+1872              (lmin, lmax) = limitby 
+1873              if len(sql_w) > 1: 
+1874                  sql_w_row = sql_w + ' AND w_row > %i' % lmin 
+1875              else: 
+1876                  sql_w_row = 'WHERE w_row > %i' % lmin 
+1877              return 'SELECT %s %s FROM (SELECT w_tmp.*, ROWNUM w_row FROM (SELECT %s FROM %s%s%s) w_tmp WHERE ROWNUM<=%i) %s %s %s;' % (sql_s, sql_f, sql_f, sql_t, sql_w, sql_o, lmax, sql_t, sql_w_row, sql_o) 
+1878          return 'SELECT %s %s FROM %s%s%s;' % (sql_s, sql_f, sql_t, sql_w, sql_o) 
+
    1879   
+
    1880 -    def constraint_name(self, tablename, fieldname): 
+
    1881          constraint_name = BaseAdapter.constraint_name(self, tablename, fieldname) 
+1882          if len(constraint_name)>30: 
+1883              constraint_name = '%s_%s__constraint' % (tablename[:10], fieldname[:7]) 
+1884          return constraint_name 
+
    1885   
+
    1886 -    def represent_exceptions(self, obj, fieldtype): 
+
    1887          if fieldtype == 'blob': 
+1888              obj = base64.b64encode(str(obj)) 
+1889              return ":CLOB('%s')" % obj 
+1890          elif fieldtype == 'date': 
+1891              if isinstance(obj, (datetime.date, datetime.datetime)): 
+1892                  obj = obj.isoformat()[:10] 
+1893              else: 
+1894                  obj = str(obj) 
+1895              return "to_date('%s','yyyy-mm-dd')" % obj 
+1896          elif fieldtype == 'datetime': 
+1897              if isinstance(obj, datetime.datetime): 
+1898                  obj = obj.isoformat()[:19].replace('T',' ') 
+1899              elif isinstance(obj, datetime.date): 
+1900                  obj = obj.isoformat()[:10]+' 00:00:00' 
+1901              else: 
+1902                  obj = str(obj) 
+1903              return "to_date('%s','yyyy-mm-dd hh24:mi:ss')" % obj 
+1904          return None 
+
    1905   
+
    1906 -    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8', 
+1907                   credential_decoder=lambda x:x, driver_args={}, 
+1908                      adapter_args={}): 
+
    1909          self.db = db 
+1910          self.dbengine = "oracle" 
+1911          self.uri = uri 
+1912          self.pool_size = pool_size 
+1913          self.folder = folder 
+1914          self.db_codec = db_codec 
+1915          self.find_or_make_work_folder() 
+1916          uri = uri.split('://')[1] 
+1917          if not 'threaded' in driver_args: 
+1918              driver_args['threaded']=True 
+1919          def connect(uri=uri,driver_args=driver_args): 
+1920              return self.driver.connect(uri,**driver_args) 
+
    1921          self.pool_connection(connect) 
+1922          self.cursor = self.connection.cursor() 
+1923          self.execute("ALTER SESSION SET NLS_DATE_FORMAT = 'YYYY-MM-DD HH24:MI:SS';") 
+1924          self.execute("ALTER SESSION SET NLS_TIMESTAMP_FORMAT = 'YYYY-MM-DD HH24:MI:SS';") 
+
    1925      oracle_fix = re.compile("[^']*('[^']*'[^']*)*\:(?P<clob>CLOB\('([^']+|'')*'\))") 
+1926   
+
    1927 -    def execute(self, command): 
+
    1928          args = [] 
+1929          i = 1 
+1930          while True: 
+1931              m = self.oracle_fix.match(command) 
+1932              if not m: 
+1933                  break 
+1934              command = command[:m.start('clob')] + str(i) + command[m.end('clob'):] 
+1935              args.append(m.group('clob')[6:-2].replace("''", "'")) 
+1936              i += 1 
+1937          return self.log_execute(command[:-1], args) 
+
    1938   
+
    1939 -    def create_sequence_and_triggers(self, query, table, **args): 
+
    1940          tablename = table._tablename 
+1941          sequence_name = table._sequence_name 
+1942          trigger_name = table._trigger_name 
+1943          self.execute(query) 
+1944          self.execute('CREATE SEQUENCE %s START WITH 1 INCREMENT BY 1 NOMAXVALUE;' % sequence_name) 
+1945          self.execute('CREATE OR REPLACE TRIGGER %s BEFORE INSERT ON %s FOR EACH ROW BEGIN SELECT %s.nextval INTO :NEW.id FROM DUAL; END;\n' % (trigger_name, tablename, sequence_name)) 
+
    1946   
+
    1947 -    def lastrowid(self,table): 
+
    1948          sequence_name = table._sequence_name 
+1949          self.execute('SELECT %s.currval FROM dual;' % sequence_name) 
+1950          return int(self.cursor.fetchone()[0]) 
+
    1951   
+1952   
+
    1953 -class MSSQLAdapter(BaseAdapter): 
+
    1954   
+1955      driver = globals().get('pyodbc',None) 
+1956   
+1957      types = { 
+1958          'boolean': 'BIT', 
+1959          'string': 'VARCHAR(%(length)s)', 
+1960          'text': 'TEXT', 
+1961          'password': 'VARCHAR(%(length)s)', 
+1962          'blob': 'IMAGE', 
+1963          'upload': 'VARCHAR(%(length)s)', 
+1964          'integer': 'INT', 
+1965          'double': 'FLOAT', 
+1966          'decimal': 'NUMERIC(%(precision)s,%(scale)s)', 
+1967          'date': 'DATETIME', 
+1968          'time': 'CHAR(8)', 
+1969          'datetime': 'DATETIME', 
+1970          'id': 'INT IDENTITY PRIMARY KEY', 
+1971          'reference': 'INT NULL, CONSTRAINT %(constraint_name)s FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s', 
+1972          'reference FK': ', CONSTRAINT FK_%(constraint_name)s FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s', 
+1973          'reference TFK': ' CONSTRAINT FK_%(foreign_table)s_PK FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_table)s (%(foreign_key)s) ON DELETE %(on_delete_action)s', 
+1974          'list:integer': 'TEXT', 
+1975          'list:string': 'TEXT', 
+1976          'list:reference': 'TEXT', 
+1977          } 
+1978   
+
    1979 -    def EXTRACT(self,field,what): 
+
    1980          return "DATEPART(%s,%s)" % (what, self.expand(field)) 
+
    1981   
+
    1982 -    def LEFT_JOIN(self): 
+
    1983          return 'LEFT OUTER JOIN' 
+
    1984   
+
    1985 -    def RANDOM(self): 
+
    1986          return 'NEWID()' 
+
    1987   
+
    1988 -    def ALLOW_NULL(self): 
+
    1989          return ' NULL' 
+
    1990   
+
    1991 -    def SUBSTRING(self,field,parameters): 
+
    1992          return 'SUBSTRING(%s,%s,%s)' % (self.expand(field), parameters[0], parameters[1]) 
+
    1993   
+
    1994 -    def PRIMARY_KEY(self,key): 
+
    1995          return 'PRIMARY KEY CLUSTERED (%s)' % key 
+
    1996   
+
    1997 -    def select_limitby(self, sql_s, sql_f, sql_t, sql_w, sql_o, limitby): 
+
    1998          if limitby: 
+1999              (lmin, lmax) = limitby 
+2000              sql_s += ' TOP %i' % lmax 
+2001          return 'SELECT %s %s FROM %s%s%s;' % (sql_s, sql_f, sql_t, sql_w, sql_o) 
+
    2002   
+
    2003 -    def represent_exceptions(self, obj, fieldtype): 
+
    2004          if fieldtype == 'boolean': 
+2005              if obj and not str(obj)[0].upper() == 'F': 
+2006                  return '1' 
+2007              else: 
+2008                  return '0' 
+2009          return None 
+
    2010   
+
    2011 -    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8', 
+2012                   credential_decoder=lambda x:x, driver_args={}, 
+2013                      adapter_args={}, fake_connect=False): 
+
    2014          self.db = db 
+2015          self.dbengine = "mssql" 
+2016          self.uri = uri 
+2017          self.pool_size = pool_size 
+2018          self.folder = folder 
+2019          self.db_codec = db_codec 
+2020          self.find_or_make_work_folder() 
+2021          # ## read: http://bytes.com/groups/python/460325-cx_oracle-utf8 
+2022          uri = uri.split('://')[1] 
+2023          if '@' not in uri: 
+2024              try: 
+2025                  m = re.compile('^(?P<dsn>.+)$').match(uri) 
+2026                  if not m: 
+2027                      raise SyntaxError, \ 
+2028                          'Parsing uri string(%s) has no result' % self.uri 
+2029                  dsn = m.group('dsn') 
+2030                  if not dsn: 
+2031                      raise SyntaxError, 'DSN required' 
+2032              except SyntaxError, e: 
+2033                  logger.error('NdGpatch error') 
+2034                  raise e 
+2035              cnxn = 'DSN=%s' % dsn 
+2036          else: 
+2037              m = re.compile('^(?P<user>[^:@]+)(\:(?P<password>[^@]*))?@(?P<host>[^\:/]+)(\:(?P<port>[0-9]+))?/(?P<db>[^\?]+)(\?(?P<urlargs>.*))?$').match(uri) 
+2038              if not m: 
+2039                  raise SyntaxError, \ 
+2040                      "Invalid URI string in DAL: %s" % uri 
+2041              user = credential_decoder(m.group('user')) 
+2042              if not user: 
+2043                  raise SyntaxError, 'User required' 
+2044              password = credential_decoder(m.group('password')) 
+2045              if not password: 
+2046                  password = '' 
+2047              host = m.group('host') 
+2048              if not host: 
+2049                  raise SyntaxError, 'Host name required' 
+2050              db = m.group('db') 
+2051              if not db: 
+2052                  raise SyntaxError, 'Database name required' 
+2053              port = m.group('port') or '1433' 
+2054              # Parse the optional url name-value arg pairs after the '?' 
+2055              # (in the form of arg1=value1&arg2=value2&...) 
+2056              # Default values (drivers like FreeTDS insist on uppercase parameter keys) 
+2057              argsdict = { 'DRIVER':'{SQL Server}' } 
+2058              urlargs = m.group('urlargs') or '' 
+2059              argpattern = re.compile('(?P<argkey>[^=]+)=(?P<argvalue>[^&]*)') 
+2060              for argmatch in argpattern.finditer(urlargs): 
+2061                  argsdict[str(argmatch.group('argkey')).upper()] = argmatch.group('argvalue') 
+2062              urlargs = ';'.join(['%s=%s' % (ak, av) for (ak, av) in argsdict.items()]) 
+2063              cnxn = 'SERVER=%s;PORT=%s;DATABASE=%s;UID=%s;PWD=%s;%s' \ 
+2064                  % (host, port, db, user, password, urlargs) 
+2065          def connect(cnxn=cnxn,driver_args=driver_args): 
+2066              return self.driver.connect(cnxn,**driver_args) 
+
    2067          if not fake_connect: 
+2068              self.pool_connection(connect) 
+2069              self.cursor = self.connection.cursor() 
+
    2070   
+
    2071 -    def lastrowid(self,table): 
+
    2072          #self.execute('SELECT @@IDENTITY;') 
+2073          self.execute('SELECT SCOPE_IDENTITY();') 
+2074          return int(self.cursor.fetchone()[0]) 
+
    2075   
+
    2076 -    def integrity_error_class(self): 
+
    2077          return pyodbc.IntegrityError 
+
    2078   
+
    2079 -    def rowslice(self,rows,minimum=0,maximum=None): 
+
    2080          if maximum is None: 
+2081              return rows[minimum:] 
+2082          return rows[minimum:maximum] 
+
    2083   
+2084   
+
    2085 -class MSSQL2Adapter(MSSQLAdapter): 
+
    2086      types = { 
+2087          'boolean': 'CHAR(1)', 
+2088          'string': 'NVARCHAR(%(length)s)', 
+2089          'text': 'NTEXT', 
+2090          'password': 'NVARCHAR(%(length)s)', 
+2091          'blob': 'IMAGE', 
+2092          'upload': 'NVARCHAR(%(length)s)', 
+2093          'integer': 'INT', 
+2094          'double': 'FLOAT', 
+2095          'decimal': 'NUMERIC(%(precision)s,%(scale)s)', 
+2096          'date': 'DATETIME', 
+2097          'time': 'CHAR(8)', 
+2098          'datetime': 'DATETIME', 
+2099          'id': 'INT IDENTITY PRIMARY KEY', 
+2100          'reference': 'INT, CONSTRAINT %(constraint_name)s FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s', 
+2101          'reference FK': ', CONSTRAINT FK_%(constraint_name)s FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s', 
+2102          'reference TFK': ' CONSTRAINT FK_%(foreign_table)s_PK FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_table)s (%(foreign_key)s) ON DELETE %(on_delete_action)s', 
+2103          'list:integer': 'NTEXT', 
+2104          'list:string': 'NTEXT', 
+2105          'list:reference': 'NTEXT', 
+2106          } 
+2107   
+
    2108 -    def represent(self, obj, fieldtype): 
+
    2109          value = BaseAdapter.represent(self, obj, fieldtype) 
+2110          if (fieldtype == 'string' or fieldtype == 'text') and value[:1]=="'": 
+2111              value = 'N'+value 
+2112          return value 
+
    2113   
+
    2114 -    def execute(self,a): 
+
    2115          return self.log_execute(a.decode('utf8')) 
+
    2116   
+2117   
+
    2118 -class FireBirdAdapter(BaseAdapter): 
+
    2119   
+2120      driver = globals().get('pyodbc',None) 
+2121   
+2122      commit_on_alter_table = False 
+2123      support_distributed_transaction = True 
+2124      types = { 
+2125          'boolean': 'CHAR(1)', 
+2126          'string': 'VARCHAR(%(length)s)', 
+2127          'text': 'BLOB SUB_TYPE 1', 
+2128          'password': 'VARCHAR(%(length)s)', 
+2129          'blob': 'BLOB SUB_TYPE 0', 
+2130          'upload': 'VARCHAR(%(length)s)', 
+2131          'integer': 'INTEGER', 
+2132          'double': 'DOUBLE PRECISION', 
+2133          'decimal': 'DECIMAL(%(precision)s,%(scale)s)', 
+2134          'date': 'DATE', 
+2135          'time': 'TIME', 
+2136          'datetime': 'TIMESTAMP', 
+2137          'id': 'INTEGER PRIMARY KEY', 
+2138          'reference': 'INTEGER REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s', 
+2139          'list:integer': 'BLOB SUB_TYPE 1', 
+2140          'list:string': 'BLOB SUB_TYPE 1', 
+2141          'list:reference': 'BLOB SUB_TYPE 1', 
+2142          } 
+2143   
+
    2144 -    def sequence_name(self,tablename): 
+
    2145          return 'genid_%s' % tablename 
+
    2146   
+
    2147 -    def trigger_name(self,tablename): 
+
    2148          return 'trg_id_%s' % tablename 
+
    2149   
+
    2150 -    def RANDOM(self): 
+
    2151          return 'RAND()' 
+
    2152   
+
    2153 -    def NOT_NULL(self,default,field_type): 
+
    2154          return 'DEFAULT %s NOT NULL' % self.represent(default,field_type) 
+
    2155   
+
    2156 -    def SUBSTRING(self,field,parameters): 
+
    2157          return 'SUBSTRING(%s from %s for %s)' % (self.expand(field), parameters[0], parameters[1]) 
+
    2158   
+
    2159 -    def _drop(self,table,mode): 
+
    2160          sequence_name = table._sequence_name 
+2161          return ['DROP TABLE %s %s;' % (table, mode), 'DROP GENERATOR %s;' % sequence_name] 
+
    2162   
+
    2163 -    def select_limitby(self, sql_s, sql_f, sql_t, sql_w, sql_o, limitby): 
+
    2164          if limitby: 
+2165              (lmin, lmax) = limitby 
+2166              sql_s += ' FIRST %i SKIP %i' % (lmax - lmin, lmin) 
+2167          return 'SELECT %s %s FROM %s%s%s;' % (sql_s, sql_f, sql_t, sql_w, sql_o) 
+
    2168   
+
    2169 -    def _truncate(self,table,mode = ''): 
+
    2170          return ['DELETE FROM %s;' % table._tablename, 
+2171                  'SET GENERATOR %s TO 0;' % table._sequence_name] 
+
    2172   
+
    2173 -    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8', 
+2174                   credential_decoder=lambda x:x, driver_args={}, 
+2175                      adapter_args={}): 
+
    2176          self.db = db 
+2177          self.dbengine = "firebird" 
+2178          self.uri = uri 
+2179          self.pool_size = pool_size 
+2180          self.folder = folder 
+2181          self.db_codec = db_codec 
+2182          self.find_or_make_work_folder() 
+2183          uri = uri.split('://')[1] 
+2184          m = re.compile('^(?P<user>[^:@]+)(\:(?P<password>[^@]*))?@(?P<host>[^\:/]+)(\:(?P<port>[0-9]+))?/(?P<db>.+?)(\?set_encoding=(?P<charset>\w+))?$').match(uri) 
+2185          if not m: 
+2186              raise SyntaxError, "Invalid URI string in DAL: %s" % uri 
+2187          user = credential_decoder(m.group('user')) 
+2188          if not user: 
+2189              raise SyntaxError, 'User required' 
+2190          password = credential_decoder(m.group('password')) 
+2191          if not password: 
+2192              password = '' 
+2193          host = m.group('host') 
+2194          if not host: 
+2195              raise SyntaxError, 'Host name required' 
+2196          port = int(m.group('port') or 3050) 
+2197          db = m.group('db') 
+2198          if not db: 
+2199              raise SyntaxError, 'Database name required' 
+2200          charset = m.group('charset') or 'UTF8' 
+2201          driver_args.update(dict(dsn='%s/%s:%s' % (host,port,db), 
+2202                                     user = credential_decoder(user), 
+2203                                     password = credential_decoder(password), 
+2204                                     charset = charset)) 
+2205          if adapter_args.has_key('driver_name'): 
+2206              if adapter_args['driver_name'] == 'kinterbasdb': 
+2207                  self.driver = kinterbasdb 
+2208              elif adapter_args['driver_name'] == 'firebirdsql': 
+2209                  self.driver = firebirdsql 
+2210          else: 
+2211              self.driver = kinterbasdb         
+2212          def connect(driver_args=driver_args): 
+2213              return self.driver.connect(**driver_args) 
+
    2214          self.pool_connection(connect) 
+2215          self.cursor = self.connection.cursor() 
+
    2216   
+
    2217 -    def create_sequence_and_triggers(self, query, table, **args): 
+
    2218          tablename = table._tablename 
+2219          sequence_name = table._sequence_name 
+2220          trigger_name = table._trigger_name 
+2221          self.execute(query) 
+2222          self.execute('create generator %s;' % sequence_name) 
+2223          self.execute('set generator %s to 0;' % sequence_name) 
+2224          self.execute('create trigger %s for %s active before insert position 0 as\nbegin\nif(new.id is null) then\nbegin\nnew.id = gen_id(%s, 1);\nend\nend;' % (trigger_name, tablename, sequence_name)) 
+
    2225   
+
    2226 -    def lastrowid(self,table): 
+
    2227          sequence_name = table._sequence_name 
+2228          self.execute('SELECT gen_id(%s, 0) FROM rdb$database' % sequence_name) 
+2229          return int(self.cursor.fetchone()[0]) 
+
    2230   
+2231   
+
    2232 -class FireBirdEmbeddedAdapter(FireBirdAdapter): 
+
    2233   
+
    2234 -    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8', 
+2235                   credential_decoder=lambda x:x, driver_args={}, 
+2236                      adapter_args={}): 
+
    2237          self.db = db 
+2238          self.dbengine = "firebird" 
+2239          self.uri = uri 
+2240          self.pool_size = pool_size 
+2241          self.folder = folder 
+2242          self.db_codec = db_codec 
+2243          self.find_or_make_work_folder() 
+2244          uri = uri.split('://')[1] 
+2245          m = re.compile('^(?P<user>[^:@]+)(\:(?P<password>[^@]*))?@(?P<path>[^\?]+)(\?set_encoding=(?P<charset>\w+))?$').match(uri) 
+2246          if not m: 
+2247              raise SyntaxError, \ 
+2248                  "Invalid URI string in DAL: %s" % self.uri 
+2249          user = credential_decoder(m.group('user')) 
+2250          if not user: 
+2251              raise SyntaxError, 'User required' 
+2252          password = credential_decoder(m.group('password')) 
+2253          if not password: 
+2254              password = '' 
+2255          pathdb = m.group('path') 
+2256          if not pathdb: 
+2257              raise SyntaxError, 'Path required' 
+2258          charset = m.group('charset') 
+2259          if not charset: 
+2260              charset = 'UTF8' 
+2261          host = '' 
+2262          driver_args.update(dict(host=host, 
+2263                                     database=pathdb, 
+2264                                     user=credential_decoder(user), 
+2265                                     password=credential_decoder(password), 
+2266                                     charset=charset)) 
+2267          #def connect(driver_args=driver_args): 
+2268          #    return kinterbasdb.connect(**driver_args) 
+2269          if adapter_args.has_key('driver_name'): 
+2270              if adapter_args['driver_name'] == 'kinterbasdb': 
+2271                  self.driver = kinterbasdb 
+2272              elif adapter_args['driver_name'] == 'firebirdsql': 
+2273                  self.driver = firebirdsql 
+2274          else: 
+2275              self.driver = kinterbasdb         
+2276          def connect(driver_args=driver_args): 
+2277              return self.driver.connect(**driver_args) 
+
    2278          self.pool_connection(connect) 
+2279          self.cursor = self.connection.cursor() 
+
    2280   
+2281   
+
    2282 -class InformixAdapter(BaseAdapter): 
+
    2283   
+2284      driver = globals().get('informixdb',None) 
+2285   
+2286      types = { 
+2287          'boolean': 'CHAR(1)', 
+2288          'string': 'VARCHAR(%(length)s)', 
+2289          'text': 'BLOB SUB_TYPE 1', 
+2290          'password': 'VARCHAR(%(length)s)', 
+2291          'blob': 'BLOB SUB_TYPE 0', 
+2292          'upload': 'VARCHAR(%(length)s)', 
+2293          'integer': 'INTEGER', 
+2294          'double': 'FLOAT', 
+2295          'decimal': 'NUMERIC(%(precision)s,%(scale)s)', 
+2296          'date': 'DATE', 
+2297          'time': 'CHAR(8)', 
+2298          'datetime': 'DATETIME', 
+2299          'id': 'SERIAL', 
+2300          'reference': 'INTEGER REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s', 
+2301          'reference FK': 'REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s CONSTRAINT FK_%(table_name)s_%(field_name)s', 
+2302          'reference TFK': 'FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_table)s (%(foreign_key)s) ON DELETE %(on_delete_action)s CONSTRAINT TFK_%(table_name)s_%(field_name)s', 
+2303          'list:integer': 'BLOB SUB_TYPE 1', 
+2304          'list:string': 'BLOB SUB_TYPE 1', 
+2305          'list:reference': 'BLOB SUB_TYPE 1', 
+2306          } 
+2307   
+
    2308 -    def RANDOM(self): 
+
    2309          return 'Random()' 
+
    2310   
+
    2311 -    def NOT_NULL(self,default,field_type): 
+
    2312          return 'DEFAULT %s NOT NULL' % self.represent(default,field_type) 
+
    2313   
+
    2314 -    def select_limitby(self, sql_s, sql_f, sql_t, sql_w, sql_o, limitby): 
+
    2315          if limitby: 
+2316              (lmin, lmax) = limitby 
+2317              fetch_amt = lmax - lmin 
+2318              dbms_version = int(self.connection.dbms_version.split('.')[0]) 
+2319              if lmin and (dbms_version >= 10): 
+2320                  # Requires Informix 10.0+ 
+2321                  sql_s += ' SKIP %d' % (lmin, ) 
+2322              if fetch_amt and (dbms_version >= 9): 
+2323                  # Requires Informix 9.0+ 
+2324                  sql_s += ' FIRST %d' % (fetch_amt, ) 
+2325          return 'SELECT %s %s FROM %s%s%s;' % (sql_s, sql_f, sql_t, sql_w, sql_o) 
+
    2326   
+
    2327 -    def represent_exceptions(self, obj, fieldtype): 
+
    2328          if fieldtype == 'date': 
+2329              if isinstance(obj, (datetime.date, datetime.datetime)): 
+2330                  obj = obj.isoformat()[:10] 
+2331              else: 
+2332                  obj = str(obj) 
+2333              return "to_date('%s','yyyy-mm-dd')" % obj 
+2334          elif fieldtype == 'datetime': 
+2335              if isinstance(obj, datetime.datetime): 
+2336                  obj = obj.isoformat()[:19].replace('T',' ') 
+2337              elif isinstance(obj, datetime.date): 
+2338                  obj = obj.isoformat()[:10]+' 00:00:00' 
+2339              else: 
+2340                  obj = str(obj) 
+2341              return "to_date('%s','yyyy-mm-dd hh24:mi:ss')" % obj 
+2342          return None 
+
    2343   
+
    2344 -    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8', 
+2345                   credential_decoder=lambda x:x, driver_args={}, 
+2346                      adapter_args={}): 
+
    2347          self.db = db 
+2348          self.dbengine = "informix" 
+2349          self.uri = uri 
+2350          self.pool_size = pool_size 
+2351          self.folder = folder 
+2352          self.db_codec = db_codec 
+2353          self.find_or_make_work_folder() 
+2354          uri = uri.split('://')[1] 
+2355          m = re.compile('^(?P<user>[^:@]+)(\:(?P<password>[^@]*))?@(?P<host>[^\:/]+)(\:(?P<port>[0-9]+))?/(?P<db>.+)$').match(uri) 
+2356          if not m: 
+2357              raise SyntaxError, \ 
+2358                  "Invalid URI string in DAL: %s" % self.uri 
+2359          user = credential_decoder(m.group('user')) 
+2360          if not user: 
+2361              raise SyntaxError, 'User required' 
+2362          password = credential_decoder(m.group('password')) 
+2363          if not password: 
+2364              password = '' 
+2365          host = m.group('host') 
+2366          if not host: 
+2367              raise SyntaxError, 'Host name required' 
+2368          db = m.group('db') 
+2369          if not db: 
+2370              raise SyntaxError, 'Database name required' 
+2371          user = credential_decoder(user) 
+2372          password = credential_decoder(password) 
+2373          dsn = '%s@%s' % (db,host) 
+2374          driver_args.update(dict(user=user,password=password,autocommit=True)) 
+2375          def connect(dsn=dsn,driver_args=driver_args): 
+2376              return self.driver.connect(dsn,**driver_args) 
+
    2377          self.pool_connection(connect) 
+2378          self.cursor = self.connection.cursor() 
+
    2379   
+
    2380 -    def execute(self,command): 
+
    2381          if command[-1:]==';': 
+2382              command = command[:-1] 
+2383          return self.log_execute(command) 
+
    2384   
+
    2385 -    def lastrowid(self,table): 
+
    2386          return self.cursor.sqlerrd[1] 
+
    2387   
+
    2388 -    def integrity_error_class(self): 
+
    2389          return informixdb.IntegrityError 
+
    2390   
+2391   
+
    2392 -class DB2Adapter(BaseAdapter): 
+
    2393   
+2394      driver = globals().get('pyodbc',None) 
+2395   
+2396      types = { 
+2397          'boolean': 'CHAR(1)', 
+2398          'string': 'VARCHAR(%(length)s)', 
+2399          'text': 'CLOB', 
+2400          'password': 'VARCHAR(%(length)s)', 
+2401          'blob': 'BLOB', 
+2402          'upload': 'VARCHAR(%(length)s)', 
+2403          'integer': 'INT', 
+2404          'double': 'DOUBLE', 
+2405          'decimal': 'NUMERIC(%(precision)s,%(scale)s)', 
+2406          'date': 'DATE', 
+2407          'time': 'TIME', 
+2408          'datetime': 'TIMESTAMP', 
+2409          'id': 'INTEGER GENERATED ALWAYS AS IDENTITY PRIMARY KEY NOT NULL', 
+2410          'reference': 'INT, FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s', 
+2411          'reference FK': ', CONSTRAINT FK_%(constraint_name)s FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s', 
+2412          'reference TFK': ' CONSTRAINT FK_%(foreign_table)s_PK FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_table)s (%(foreign_key)s) ON DELETE %(on_delete_action)s', 
+2413          'list:integer': 'CLOB', 
+2414          'list:string': 'CLOB', 
+2415          'list:reference': 'CLOB', 
+2416          } 
+2417   
+
    2418 -    def LEFT_JOIN(self): 
+
    2419          return 'LEFT OUTER JOIN' 
+
    2420   
+
    2421 -    def RANDOM(self): 
+
    2422          return 'RAND()' 
+
    2423   
+
    2424 -    def select_limitby(self, sql_s, sql_f, sql_t, sql_w, sql_o, limitby): 
+
    2425          if limitby: 
+2426              (lmin, lmax) = limitby 
+2427              sql_o += ' FETCH FIRST %i ROWS ONLY' % lmax 
+2428          return 'SELECT %s %s FROM %s%s%s;' % (sql_s, sql_f, sql_t, sql_w, sql_o) 
+
    2429   
+
    2430 -    def represent_exceptions(self, obj, fieldtype): 
+
    2431          if fieldtype == 'blob': 
+2432              obj = base64.b64encode(str(obj)) 
+2433              return "BLOB('%s')" % obj 
+2434          elif fieldtype == 'datetime': 
+2435              if isinstance(obj, datetime.datetime): 
+2436                  obj = obj.isoformat()[:19].replace('T','-').replace(':','.') 
+2437              elif isinstance(obj, datetime.date): 
+2438                  obj = obj.isoformat()[:10]+'-00.00.00' 
+2439              return "'%s'" % obj 
+2440          return None 
+
    2441   
+
    2442 -    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8', 
+2443                   credential_decoder=lambda x:x, driver_args={}, 
+2444                      adapter_args={}): 
+
    2445          self.db = db 
+2446          self.dbengine = "db2" 
+2447          self.uri = uri 
+2448          self.pool_size = pool_size 
+2449          self.folder = folder 
+2450          self.db_codec = db_codec 
+2451          self.find_or_make_work_folder() 
+2452          cnxn = uri.split('://', 1)[1] 
+2453          def connect(cnxn=cnxn,driver_args=driver_args): 
+2454              return self.driver.connect(cnxn,**driver_args) 
+
    2455          self.pool_connection(connect) 
+2456          self.cursor = self.connection.cursor() 
+
    2457   
+
    2458 -    def execute(self,command): 
+
    2459          if command[-1:]==';': 
+2460              command = command[:-1] 
+2461          return self.log_execute(command) 
+
    2462   
+
    2463 -    def lastrowid(self,table): 
+
    2464          self.execute('SELECT DISTINCT IDENTITY_VAL_LOCAL() FROM %s;' % table) 
+2465          return int(self.cursor.fetchone()[0]) 
+
    2466   
+
    2467 -    def rowslice(self,rows,minimum=0,maximum=None): 
+
    2468          if maximum is None: 
+2469              return rows[minimum:] 
+2470          return rows[minimum:maximum] 
+
    2471   
+2472   
+
    2473 -class TeradataAdapter(DB2Adapter): 
+
    2474   
+2475      driver = globals().get('pyodbc',None) 
+2476   
+2477      types = { 
+2478          'boolean': 'CHAR(1)', 
+2479          'string': 'VARCHAR(%(length)s)', 
+2480          'text': 'CLOB', 
+2481          'password': 'VARCHAR(%(length)s)', 
+2482          'blob': 'BLOB', 
+2483          'upload': 'VARCHAR(%(length)s)', 
+2484          'integer': 'INT', 
+2485          'double': 'DOUBLE', 
+2486          'decimal': 'NUMERIC(%(precision)s,%(scale)s)', 
+2487          'date': 'DATE', 
+2488          'time': 'TIME', 
+2489          'datetime': 'TIMESTAMP', 
+2490          'id': 'INTEGER GENERATED ALWAYS AS IDENTITY PRIMARY KEY NOT NULL', 
+2491          'reference': 'INT, FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s', 
+2492          'reference FK': ', CONSTRAINT FK_%(constraint_name)s FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s', 
+2493          'reference TFK': ' CONSTRAINT FK_%(foreign_table)s_PK FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_table)s (%(foreign_key)s) ON DELETE %(on_delete_action)s', 
+2494          'list:integer': 'CLOB', 
+2495          'list:string': 'CLOB', 
+2496          'list:reference': 'CLOB', 
+2497          } 
+2498   
+2499   
+
    2500 -    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8', 
+2501                   credential_decoder=lambda x:x, driver_args={}, 
+2502                      adapter_args={}): 
+
    2503          self.db = db 
+2504          self.dbengine = "teradata" 
+2505          self.uri = uri 
+2506          self.pool_size = pool_size 
+2507          self.folder = folder 
+2508          self.db_codec = db_codec 
+2509          self.find_or_make_work_folder() 
+2510          cnxn = uri.split('://', 1)[1] 
+2511          def connect(cnxn=cnxn,driver_args=driver_args): 
+2512              return self.driver.connect(cnxn,**driver_args) 
+
    2513          self.pool_connection(connect) 
+2514          self.cursor = self.connection.cursor() 
+
    2515   
+2516   
+2517  INGRES_SEQNAME='ii***lineitemsequence' # NOTE invalid database object name 
+2518                                         # (ANSI-SQL wants this form of name 
+2519                                         # to be a delimited identifier) 
+2520   
+
    2521 -class IngresAdapter(BaseAdapter): 
+
    2522   
+2523      driver = globals().get('ingresdbi',None) 
+2524   
+2525      types = { 
+2526          'boolean': 'CHAR(1)', 
+2527          'string': 'VARCHAR(%(length)s)', 
+2528          'text': 'CLOB', 
+2529          'password': 'VARCHAR(%(length)s)',  ## Not sure what this contains utf8 or nvarchar. Or even bytes? 
+2530          'blob': 'BLOB', 
+2531          'upload': 'VARCHAR(%(length)s)',  ## FIXME utf8 or nvarchar... or blob? what is this type? 
+2532          'integer': 'INTEGER4', # or int8... 
+2533          'double': 'FLOAT8', 
+2534          'decimal': 'NUMERIC(%(precision)s,%(scale)s)', 
+2535          'date': 'ANSIDATE', 
+2536          'time': 'TIME WITHOUT TIME ZONE', 
+2537          'datetime': 'TIMESTAMP WITHOUT TIME ZONE', 
+2538          'id': 'integer4 not null unique with default next value for %s' % INGRES_SEQNAME, 
+2539          'reference': 'integer4, FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s', 
+2540          'reference FK': ', CONSTRAINT FK_%(constraint_name)s FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s', 
+2541          'reference TFK': ' CONSTRAINT FK_%(foreign_table)s_PK FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_table)s (%(foreign_key)s) ON DELETE %(on_delete_action)s', ## FIXME TODO 
+2542          'list:integer': 'CLOB', 
+2543          'list:string': 'CLOB', 
+2544          'list:reference': 'CLOB', 
+2545          } 
+2546   
+
    2547 -    def LEFT_JOIN(self): 
+
    2548          return 'LEFT OUTER JOIN' 
+
    2549   
+
    2550 -    def RANDOM(self): 
+
    2551          return 'RANDOM()' 
+
    2552   
+
    2553 -    def select_limitby(self, sql_s, sql_f, sql_t, sql_w, sql_o, limitby): 
+
    2554          if limitby: 
+2555              (lmin, lmax) = limitby 
+2556              fetch_amt = lmax - lmin 
+2557              if fetch_amt: 
+2558                  sql_s += ' FIRST %d ' % (fetch_amt, ) 
+2559              if lmin: 
+2560                  # Requires Ingres 9.2+ 
+2561                  sql_o += ' OFFSET %d' % (lmin, ) 
+2562          return 'SELECT %s %s FROM %s%s%s;' % (sql_s, sql_f, sql_t, sql_w, sql_o) 
+
    2563   
+
    2564 -    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8', 
+2565                   credential_decoder=lambda x:x, driver_args={}, 
+2566                      adapter_args={}): 
+
    2567          self.db = db 
+2568          self.dbengine = "ingres" 
+2569          self.uri = uri 
+2570          self.pool_size = pool_size 
+2571          self.folder = folder 
+2572          self.db_codec = db_codec 
+2573          self.find_or_make_work_folder() 
+2574          connstr = self._uri.split(':', 1)[1] 
+2575          # Simple URI processing 
+2576          connstr = connstr.lstrip() 
+2577          while connstr.startswith('/'): 
+2578              connstr = connstr[1:] 
+2579          database_name=connstr # Assume only (local) dbname is passed in 
+2580          vnode = '(local)' 
+2581          servertype = 'ingres' 
+2582          trace = (0, None) # No tracing 
+2583          driver_args.update(dict(database=database_name, 
+2584                                     vnode=vnode, 
+2585                                     servertype=servertype, 
+2586                                     trace=trace)) 
+2587          def connect(driver_args=driver_args): 
+2588              return self.driver.connect(**driver_args) 
+
    2589          self.pool_connection(connect) 
+2590          self.cursor = self.connection.cursor() 
+
    2591   
+
    2592 -    def create_sequence_and_triggers(self, query, table, **args): 
+
    2593          # post create table auto inc code (if needed) 
+2594          # modify table to btree for performance.... 
+2595          # Older Ingres releases could use rule/trigger like Oracle above. 
+2596          if hasattr(table,'_primarykey'): 
+2597              modify_tbl_sql = 'modify %s to btree unique on %s' % \ 
+2598                  (table._tablename, 
+2599                   ', '.join(["'%s'" % x for x in table.primarykey])) 
+2600              self.execute(modify_tbl_sql) 
+2601          else: 
+2602              tmp_seqname='%s_iisq' % table._tablename 
+2603              query=query.replace(INGRES_SEQNAME, tmp_seqname) 
+2604              self.execute('create sequence %s' % tmp_seqname) 
+2605              self.execute(query) 
+2606              self.execute('modify %s to btree unique on %s' % (table._tablename, 'id')) 
+
    2607   
+2608   
+
    2609 -    def lastrowid(self,table): 
+
    2610          tmp_seqname='%s_iisq' % table 
+2611          self.execute('select current value for %s' % tmp_seqname) 
+2612          return int(self.cursor.fetchone()[0]) # don't really need int type cast here... 
+
    2613   
+
    2614 -    def integrity_error_class(self): 
+
    2615          return ingresdbi.IntegrityError 
+
    2616   
+2617   
+
    2618 -class IngresUnicodeAdapter(IngresAdapter): 
+
    2619      types = { 
+2620          'boolean': 'CHAR(1)', 
+2621          'string': 'NVARCHAR(%(length)s)', 
+2622          'text': 'NCLOB', 
+2623          'password': 'NVARCHAR(%(length)s)',  ## Not sure what this contains utf8 or nvarchar. Or even bytes? 
+2624          'blob': 'BLOB', 
+2625          'upload': 'VARCHAR(%(length)s)',  ## FIXME utf8 or nvarchar... or blob? what is this type? 
+2626          'integer': 'INTEGER4', # or int8... 
+2627          'double': 'FLOAT8', 
+2628          'decimal': 'NUMERIC(%(precision)s,%(scale)s)', 
+2629          'date': 'ANSIDATE', 
+2630          'time': 'TIME WITHOUT TIME ZONE', 
+2631          'datetime': 'TIMESTAMP WITHOUT TIME ZONE', 
+2632          'id': 'integer4 not null unique with default next value for %s'% INGRES_SEQNAME, 
+2633          'reference': 'integer4, FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s', 
+2634          'reference FK': ', CONSTRAINT FK_%(constraint_name)s FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s', 
+2635          'reference TFK': ' CONSTRAINT FK_%(foreign_table)s_PK FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_table)s (%(foreign_key)s) ON DELETE %(on_delete_action)s', ## FIXME TODO 
+2636          'list:integer': 'NCLOB', 
+2637          'list:string': 'NCLOB', 
+2638          'list:reference': 'NCLOB', 
+2639          } 
+
    2640   
+
    2641 -class SAPDBAdapter(BaseAdapter): 
+
    2642   
+2643      driver = globals().get('sapdb',None) 
+2644      support_distributed_transaction = False 
+2645      types = { 
+2646          'boolean': 'CHAR(1)', 
+2647          'string': 'VARCHAR(%(length)s)', 
+2648          'text': 'LONG', 
+2649          'password': 'VARCHAR(%(length)s)', 
+2650          'blob': 'LONG', 
+2651          'upload': 'VARCHAR(%(length)s)', 
+2652          'integer': 'INT', 
+2653          'double': 'FLOAT', 
+2654          'decimal': 'FIXED(%(precision)s,%(scale)s)', 
+2655          'date': 'DATE', 
+2656          'time': 'TIME', 
+2657          'datetime': 'TIMESTAMP', 
+2658          'id': 'INT PRIMARY KEY', 
+2659          'reference': 'INT, FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s', 
+2660          'list:integer': 'LONG', 
+2661          'list:string': 'LONG', 
+2662          'list:reference': 'LONG', 
+2663          } 
+2664   
+
    2665 -    def sequence_name(self,table): 
+
    2666          return '%s_id_Seq' % table 
+
    2667   
+
    2668 -    def select_limitby(self, sql_s, sql_f, sql_t, sql_w, sql_o, limitby): 
+
    2669          if limitby: 
+2670              (lmin, lmax) = limitby 
+2671              if len(sql_w) > 1: 
+2672                  sql_w_row = sql_w + ' AND w_row > %i' % lmin 
+2673              else: 
+2674                  sql_w_row = 'WHERE w_row > %i' % lmin 
+2675              return '%s %s FROM (SELECT w_tmp.*, ROWNO w_row FROM (SELECT %s FROM %s%s%s) w_tmp WHERE ROWNO=%i) %s %s %s;' % (sql_s, sql_f, sql_f, sql_t, sql_w, sql_o, lmax, sql_t, sql_w_row, sql_o) 
+2676          return 'SELECT %s %s FROM %s%s%s;' % (sql_s, sql_f, sql_t, sql_w, sql_o) 
+
    2677   
+
    2678 -    def create_sequence_and_triggers(self, query, table, **args): 
+
    2679          # following lines should only be executed if table._sequence_name does not exist 
+2680          self.execute('CREATE SEQUENCE %s;' % table._sequence_name) 
+2681          self.execute("ALTER TABLE %s ALTER COLUMN %s SET DEFAULT NEXTVAL('%s');" \ 
+2682                           % (table._tablename, table._id.name, table._sequence_name)) 
+2683          self.execute(query) 
+
    2684   
+
    2685 -    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8', 
+2686                   credential_decoder=lambda x:x, driver_args={}, 
+2687                      adapter_args={}): 
+
    2688          self.db = db 
+2689          self.dbengine = "sapdb" 
+2690          self.uri = uri 
+2691          self.pool_size = pool_size 
+2692          self.folder = folder 
+2693          self.db_codec = db_codec 
+2694          self.find_or_make_work_folder() 
+2695          uri = uri.split('://')[1] 
+2696          m = re.compile('^(?P<user>[^:@]+)(\:(?P<password>[^@]*))?@(?P<host>[^\:@/]+)(\:(?P<port>[0-9]+))?/(?P<db>[^\?]+)(\?sslmode=(?P<sslmode>.+))?$').match(uri) 
+2697          if not m: 
+2698              raise SyntaxError, "Invalid URI string in DAL" 
+2699          user = credential_decoder(m.group('user')) 
+2700          if not user: 
+2701              raise SyntaxError, 'User required' 
+2702          password = credential_decoder(m.group('password')) 
+2703          if not password: 
+2704              password = '' 
+2705          host = m.group('host') 
+2706          if not host: 
+2707              raise SyntaxError, 'Host name required' 
+2708          db = m.group('db') 
+2709          if not db: 
+2710              raise SyntaxError, 'Database name required' 
+2711          def connect(user=user,password=password,database=db, 
+2712                      host=host,driver_args=driver_args): 
+2713              return self.driver.Connection(user,password,database, 
+2714                                            host,**driver_args) 
+
    2715          self.pool_connection(connect) 
+2716          # self.connection.set_client_encoding('UTF8') 
+2717          self.cursor = self.connection.cursor() 
+
    2718   
+
    2719 -    def lastrowid(self,table): 
+
    2720          self.execute("select %s.NEXTVAL from dual" % table._sequence_name) 
+2721          return int(self.cursor.fetchone()[0]) 
+
    2722   
+
    2723 -class CubridAdapter(MySQLAdapter): 
+
    2724   
+2725      driver = globals().get('cubriddb',None) 
+2726   
+
    2727 -    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8', 
+2728                   credential_decoder=lambda x:x, driver_args={}, 
+2729                   adapter_args={}): 
+
    2730          self.db = db 
+2731          self.dbengine = "cubrid" 
+2732          self.uri = uri 
+2733          self.pool_size = pool_size 
+2734          self.folder = folder 
+2735          self.db_codec = db_codec 
+2736          self.find_or_make_work_folder() 
+2737          uri = uri.split('://')[1] 
+2738          m = re.compile('^(?P<user>[^:@]+)(\:(?P<password>[^@]*))?@(?P<host>[^\:/]+)(\:(?P<port>[0-9]+))?/(?P<db>[^?]+)(\?set_encoding=(?P<charset>\w+))?$').match(uri) 
+2739          if not m: 
+2740              raise SyntaxError, \ 
+2741                  "Invalid URI string in DAL: %s" % self.uri 
+2742          user = credential_decoder(m.group('user')) 
+2743          if not user: 
+2744              raise SyntaxError, 'User required' 
+2745          password = credential_decoder(m.group('password')) 
+2746          if not password: 
+2747              password = '' 
+2748          host = m.group('host') 
+2749          if not host: 
+2750              raise SyntaxError, 'Host name required' 
+2751          db = m.group('db') 
+2752          if not db: 
+2753              raise SyntaxError, 'Database name required' 
+2754          port = int(m.group('port') or '30000') 
+2755          charset = m.group('charset') or 'utf8' 
+2756          user=credential_decoder(user), 
+2757          passwd=credential_decoder(password), 
+2758          def connect(host,port,db,user,passwd,driver_args=driver_args): 
+2759              return self.driver.connect(host,port,db,user,passwd,**driver_args) 
+
    2760          self.pool_connection(connect) 
+2761          self.cursor = self.connection.cursor() 
+2762          self.execute('SET FOREIGN_KEY_CHECKS=1;') 
+2763          self.execute("SET sql_mode='NO_BACKSLASH_ESCAPES';") 
+
    2764   
+2765   
+2766  ######## GAE MySQL ########## 
+2767   
+
    2768 -class DatabaseStoredFile: 
+
    2769   
+2770      web2py_filesystem = False 
+2771   
+
    2772 -    def __init__(self,db,filename,mode): 
+
    2773          if db._adapter.dbengine != 'mysql': 
+2774              raise RuntimeError, "only MySQL can store metadata .table files in database for now" 
+2775          self.db = db 
+2776          self.filename = filename 
+2777          self.mode = mode 
+2778          if not self.web2py_filesystem: 
+2779              self.db.executesql("CREATE TABLE IF NOT EXISTS web2py_filesystem (path VARCHAR(512), content LONGTEXT, PRIMARY KEY(path) ) ENGINE=InnoDB;") 
+2780              DatabaseStoredFile.web2py_filesystem = True 
+2781          self.p=0 
+2782          self.data = '' 
+2783          if mode in ('r','rw','a'): 
+2784              query = "SELECT content FROM web2py_filesystem WHERE path='%s'" % filename 
+2785              rows = self.db.executesql(query) 
+2786              if rows: 
+2787                  self.data = rows[0][0] 
+2788              elif os.path.exists(filename): 
+2789                  datafile = open(filename, 'r') 
+2790                  try: 
+2791                      self.data = datafile.read() 
+2792                  finally: 
+2793                      datafile.close() 
+2794              elif mode in ('r','rw'): 
+2795                  raise RuntimeError, "File %s does not exist" % filename 
+
    2796   
+
    2797 -    def read(self, bytes): 
+
    2798          data = self.data[self.p:self.p+bytes] 
+2799          self.p += len(data) 
+2800          return data 
+
    2801   
+
    2802 -    def readline(self): 
+
    2803          i = self.data.find('\n',self.p)+1 
+2804          if i>0: 
+2805              data, self.p = self.data[self.p:i], i 
+2806          else: 
+2807              data, self.p = self.data[self.p:], len(self.data) 
+2808          return data 
+
    2809   
+
    2810 -    def write(self,data): 
+
    2811          self.data += data 
+
    2812   
+
    2813 -    def close(self): 
+
    2814          self.db.executesql("DELETE FROM web2py_filesystem WHERE path='%s'" % self.filename) 
+2815          query = "INSERT INTO web2py_filesystem(path,content) VALUES ('%s','%s')" % \ 
+2816              (self.filename, self.data.replace("'","''")) 
+2817          self.db.executesql(query) 
+2818          self.db.commit() 
+
    2819   
+2820      @staticmethod 
+
    2821 -    def exists(db,filename): 
+
    2822          if os.path.exists(filename): 
+2823              return True 
+2824          query = "SELECT path FROM web2py_filesystem WHERE path='%s'" % filename 
+2825          if db.executesql(query): 
+2826              return True 
+2827          return False 
+
    2828   
+2829   
+
    2831   
+
    2832 -    def file_exists(self, filename): 
+
    2833          return DatabaseStoredFile.exists(self.db,filename) 
+
    2834   
+
    2835 -    def file_open(self, filename, mode='rb', lock=True): 
+
    2836          return DatabaseStoredFile(self.db,filename,mode) 
+
    2837   
+
    2838 -    def file_close(self, fileobj, unlock=True): 
+
    2839          fileobj.close() 
+
    2840   
+
    2841 -    def file_delete(self,filename): 
+
    2842          query = "DELETE FROM web2py_filesystem WHERE path='%s'" % filename 
+2843          self.db.executesql(query) 
+2844          self.db.commit() 
+
    2845   
+
    2846 -class GoogleSQLAdapter(UseDatabaseStoredFile,MySQLAdapter): 
+
    2847   
+
    2848 -    def __init__(self, db, uri='google:sql://realm:domain/database', pool_size=0, 
+2849                   folder=None, db_codec='UTF-8', check_reserved=None, 
+2850                   migrate=True, fake_migrate=False, 
+2851                   credential_decoder = lambda x:x, driver_args={}, 
+2852                      adapter_args={}): 
+
    2853   
+2854          self.db = db 
+2855          self.dbengine = "mysql" 
+2856          self.uri = uri 
+2857          self.pool_size = pool_size 
+2858          self.folder = folder 
+2859          self.db_codec = db_codec 
+2860          self.folder = folder or '$HOME/'+thread.folder.split('/applications/',1)[1] 
+2861   
+2862          m = re.compile('^(?P<instance>.*)/(?P<db>.*)$').match(self.uri[len('google:sql://'):]) 
+2863          if not m: 
+2864              raise SyntaxError, "Invalid URI string in SQLDB: %s" % self._uri 
+2865          instance = credential_decoder(m.group('instance')) 
+2866          db = credential_decoder(m.group('db')) 
+2867          driver_args['instance'] = instance 
+2868          if not migrate: 
+2869              driver_args['database'] = db 
+2870          def connect(driver_args=driver_args): 
+2871              return rdbms.connect(**driver_args) 
+
    2872          self.pool_connection(connect) 
+2873          self.cursor = self.connection.cursor() 
+2874          if migrate: 
+2875              # self.execute('DROP DATABASE %s' % db) 
+2876              self.execute('CREATE DATABASE IF NOT EXISTS %s' % db) 
+2877              self.execute('USE %s' % db) 
+2878          self.execute("SET FOREIGN_KEY_CHECKS=1;") 
+2879          self.execute("SET sql_mode='NO_BACKSLASH_ESCAPES';") 
+
    2880   
+
    2881 -class NoSQLAdapter(BaseAdapter): 
+
    2882   
+2883      @staticmethod 
+
    2884 -    def to_unicode(obj): 
+
    2885          if isinstance(obj, str): 
+2886              return obj.decode('utf8') 
+2887          elif not isinstance(obj, unicode): 
+2888              return unicode(obj) 
+2889          return obj 
+
    2890   
+
    2891 -    def represent(self, obj, fieldtype): 
+
    2892          if isinstance(obj,CALLABLETYPES): 
+2893              obj = obj() 
+2894          if isinstance(fieldtype, SQLCustomType): 
+2895              return fieldtype.encoder(obj) 
+2896          if isinstance(obj, (Expression, Field)): 
+2897              raise SyntaxError, "non supported on GAE" 
+2898          if self.dbengine=='google:datastore' in globals(): 
+2899              if isinstance(fieldtype, gae.Property): 
+2900                  return obj 
+2901          if fieldtype.startswith('list:'): 
+2902              if not obj: 
+2903                  obj = [] 
+2904              if not isinstance(obj, (list, tuple)): 
+2905                  obj = [obj] 
+2906          if obj == '' and  not fieldtype[:2] in ['st','te','pa','up']: 
+2907              return None 
+2908          if obj != None: 
+2909              if isinstance(obj, list) and not fieldtype.startswith('list'): 
+2910                  obj = [self.represent(o, fieldtype) for o in obj] 
+2911              elif fieldtype in ('integer','id'): 
+2912                  obj = long(obj) 
+2913              elif fieldtype == 'double': 
+2914                  obj = float(obj) 
+2915              elif fieldtype.startswith('reference'): 
+2916                  if isinstance(obj, (Row, Reference)): 
+2917                      obj = obj['id'] 
+2918                  obj = long(obj) 
+2919              elif fieldtype == 'boolean': 
+2920                  if obj and not str(obj)[0].upper() == 'F': 
+2921                      obj = True 
+2922                  else: 
+2923                      obj = False 
+2924              elif fieldtype == 'date': 
+2925                  if not isinstance(obj, datetime.date): 
+2926                      (y, m, d) = map(int,str(obj).strip().split('-')) 
+2927                      obj = datetime.date(y, m, d) 
+2928                  elif isinstance(obj,datetime.datetime): 
+2929                      (y, m, d) = (obj.year, obj.month, obj.day) 
+2930                      obj = datetime.date(y, m, d) 
+2931              elif fieldtype == 'time': 
+2932                  if not isinstance(obj, datetime.time): 
+2933                      time_items = map(int,str(obj).strip().split(':')[:3]) 
+2934                      if len(time_items) == 3: 
+2935                          (h, mi, s) = time_items 
+2936                      else: 
+2937                          (h, mi, s) = time_items + [0] 
+2938                      obj = datetime.time(h, mi, s) 
+2939              elif fieldtype == 'datetime': 
+2940                  if not isinstance(obj, datetime.datetime): 
+2941                      (y, m, d) = map(int,str(obj)[:10].strip().split('-')) 
+2942                      time_items = map(int,str(obj)[11:].strip().split(':')[:3]) 
+2943                      while len(time_items)<3: 
+2944                          time_items.append(0) 
+2945                      (h, mi, s) = time_items 
+2946                      obj = datetime.datetime(y, m, d, h, mi, s) 
+2947              elif fieldtype == 'blob': 
+2948                  pass 
+2949              elif fieldtype.startswith('list:string'): 
+2950                  return map(self.to_unicode,obj) 
+2951              elif fieldtype.startswith('list:'): 
+2952                  return map(int,obj) 
+2953              else: 
+2954                  obj = self.to_unicode(obj) 
+2955          return obj 
+
    2956   
+
    2957 -    def _insert(self,table,fields): 
+
    2958          return 'insert %s in %s' % (fields, table) 
+
    2959   
+
    2960 -    def _count(self,query,distinct=None): 
+
    2961          return 'count %s' % repr(query) 
+
    2962   
+
    2963 -    def _select(self,query,fields,attributes): 
+
    2964          return 'select %s where %s' % (repr(fields), repr(query)) 
+
    2965   
+
    2966 -    def _delete(self,tablename, query): 
+
    2967          return 'delete %s where %s' % (repr(tablename),repr(query)) 
+
    2968   
+
    2969 -    def _update(self,tablename,query,fields): 
+
    2970          return 'update %s (%s) where %s' % (repr(tablename), 
+2971                                              repr(fields),repr(query)) 
+
    2972   
+
    2973 -    def commit(self): 
+
    2974          """ 
+2975          remember: no transactions on many NoSQL 
+2976          """ 
+2977          pass 
+
    2978   
+
    2979 -    def rollback(self): 
+
    2980          """ 
+2981          remember: no transactions on many NoSQL 
+2982          """ 
+2983          pass 
+
    2984   
+
    2985 -    def close(self): 
+
    2986          """ 
+2987          remember: no transactions on many NoSQL 
+2988          """ 
+2989          pass 
+
    2990   
+2991   
+2992      # these functions should never be called! 
+
    2993 -    def OR(self,first,second): raise SyntaxError, "Not supported" 
+
    2994 -    def AND(self,first,second): raise SyntaxError, "Not supported" 
+
    2995 -    def AS(self,first,second): raise SyntaxError, "Not supported" 
+
    2996 -    def ON(self,first,second): raise SyntaxError, "Not supported" 
+
    2997 -    def STARTSWITH(self,first,second=None): raise SyntaxError, "Not supported" 
+
    2998 -    def ENDSWITH(self,first,second=None): raise SyntaxError, "Not supported" 
+
    2999 -    def ADD(self,first,second): raise SyntaxError, "Not supported" 
+
    3000 -    def SUB(self,first,second): raise SyntaxError, "Not supported" 
+
    3001 -    def MUL(self,first,second): raise SyntaxError, "Not supported" 
+
    3002 -    def DIV(self,first,second): raise SyntaxError, "Not supported" 
+
    3003 -    def LOWER(self,first): raise SyntaxError, "Not supported" 
+
    3004 -    def UPPER(self,first): raise SyntaxError, "Not supported" 
+
    3005 -    def EXTRACT(self,first,what): raise SyntaxError, "Not supported" 
+
    3006 -    def AGGREGATE(self,first,what): raise SyntaxError, "Not supported" 
+
    3007 -    def LEFT_JOIN(self): raise SyntaxError, "Not supported" 
+
    3008 -    def RANDOM(self): raise SyntaxError, "Not supported" 
+
    3009 -    def SUBSTRING(self,field,parameters):  raise SyntaxError, "Not supported" 
+
    3010 -    def PRIMARY_KEY(self,key):  raise SyntaxError, "Not supported" 
+
    3011 -    def LIKE(self,first,second): raise SyntaxError, "Not supported" 
+
    3012 -    def drop(self,table,mode):  raise SyntaxError, "Not supported" 
+
    3013 -    def alias(self,table,alias): raise SyntaxError, "Not supported" 
+
    3014 -    def migrate_table(self,*a,**b): raise SyntaxError, "Not supported" 
+
    3015 -    def distributed_transaction_begin(self,key): raise SyntaxError, "Not supported" 
+
    3016 -    def prepare(self,key): raise SyntaxError, "Not supported" 
+
    3017 -    def commit_prepared(self,key): raise SyntaxError, "Not supported" 
+
    3018 -    def rollback_prepared(self,key): raise SyntaxError, "Not supported" 
+
    3019 -    def concat_add(self,table): raise SyntaxError, "Not supported" 
+
    3020 -    def constraint_name(self, table, fieldname): raise SyntaxError, "Not supported" 
+
    3021 -    def create_sequence_and_triggers(self, query, table, **args): pass 
+
    3022 -    def log_execute(self,*a,**b): raise SyntaxError, "Not supported" 
+
    3023 -    def execute(self,*a,**b): raise SyntaxError, "Not supported" 
+
    3024 -    def represent_exceptions(self, obj, fieldtype): raise SyntaxError, "Not supported" 
+
    3025 -    def lastrowid(self,table): raise SyntaxError, "Not supported" 
+
    3026 -    def integrity_error_class(self): raise SyntaxError, "Not supported" 
+
    3027 -    def rowslice(self,rows,minimum=0,maximum=None): raise SyntaxError, "Not supported" 
+
    3028   
+3029   
+
    3030 -class GAEF(object): 
+
    3031 -    def __init__(self,name,op,value,apply): 
+
    3032          self.name=name=='id' and '__key__' or name 
+3033          self.op=op 
+3034          self.value=value 
+3035          self.apply=apply 
+
    3036 -    def __repr__(self): 
+
    3037          return '(%s %s %s:%s)' % (self.name, self.op, repr(self.value), type(self.value)) 
+
    3038   
+
    3039 -class GoogleDatastoreAdapter(NoSQLAdapter): 
+
    3040      uploads_in_blob = True 
+3041      types = {} 
+3042   
+
    3043 -    def file_exists(self, filename): pass 
+
    3044 -    def file_open(self, filename, mode='rb', lock=True): pass 
+
    3045 -    def file_close(self, fileobj, unlock=True): pass 
+
    3046   
+
    3047 -    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8', 
+3048                   credential_decoder=lambda x:x, driver_args={}, 
+3049                      adapter_args={}): 
+
    3050          self.types.update({ 
+3051                  'boolean': gae.BooleanProperty, 
+3052                  'string': (lambda: gae.StringProperty(multiline=True)), 
+3053                  'text': gae.TextProperty, 
+3054                  'password': gae.StringProperty, 
+3055                  'blob': gae.BlobProperty, 
+3056                  'upload': gae.StringProperty, 
+3057                  'integer': gae.IntegerProperty, 
+3058                  'double': gae.FloatProperty, 
+3059                  'decimal': GAEDecimalProperty, 
+3060                  'date': gae.DateProperty, 
+3061                  'time': gae.TimeProperty, 
+3062                  'datetime': gae.DateTimeProperty, 
+3063                  'id': None, 
+3064                  'reference': gae.IntegerProperty, 
+3065                  'list:string': (lambda: gae.StringListProperty(default=None)), 
+3066                  'list:integer': (lambda: gae.ListProperty(int,default=None)), 
+3067                  'list:reference': (lambda: gae.ListProperty(int,default=None)), 
+3068          }) 
+3069          self.db = db 
+3070          self.uri = uri 
+3071          self.dbengine = 'google:datastore' 
+3072          self.folder = folder 
+3073          db['_lastsql'] = '' 
+3074          self.db_codec = 'UTF-8' 
+3075          self.pool_size = 0 
+3076          match = re.compile('.*://(?P<namespace>.+)').match(uri) 
+3077          if match: 
+3078              namespace_manager.set_namespace(match.group('namespace')) 
+
    3079   
+
    3080 -    def create_table(self,table,migrate=True,fake_migrate=False, polymodel=None): 
+
    3081          myfields = {} 
+3082          for k in table.fields: 
+3083              if isinstance(polymodel,Table) and k in polymodel.fields(): 
+3084                  continue 
+3085              field = table[k] 
+3086              attr = {} 
+3087              if isinstance(field.type, SQLCustomType): 
+3088                  ftype = self.types[field.type.native or field.type.type](**attr) 
+3089              elif isinstance(field.type, gae.Property): 
+3090                  ftype = field.type 
+3091              elif field.type.startswith('id'): 
+3092                  continue 
+3093              elif field.type.startswith('decimal'): 
+3094                  precision, scale = field.type[7:].strip('()').split(',') 
+3095                  precision = int(precision) 
+3096                  scale = int(scale) 
+3097                  ftype = GAEDecimalProperty(precision, scale, **attr) 
+3098              elif field.type.startswith('reference'): 
+3099                  if field.notnull: 
+3100                      attr = dict(required=True) 
+3101                  referenced = field.type[10:].strip() 
+3102                  ftype = self.types[field.type[:9]](table._db[referenced]) 
+3103              elif field.type.startswith('list:reference'): 
+3104                  if field.notnull: 
+3105                      attr = dict(required=True) 
+3106                  referenced = field.type[15:].strip() 
+3107                  ftype = self.types[field.type[:14]](**attr) 
+3108              elif field.type.startswith('list:'): 
+3109                  ftype = self.types[field.type](**attr) 
+3110              elif not field.type in self.types\ 
+3111                   or not self.types[field.type]: 
+3112                  raise SyntaxError, 'Field: unknown field type: %s' % field.type 
+3113              else: 
+3114                  ftype = self.types[field.type](**attr) 
+3115              myfields[field.name] = ftype 
+3116          if not polymodel: 
+3117              table._tableobj = classobj(table._tablename, (gae.Model, ), myfields) 
+3118          elif polymodel==True: 
+3119              table._tableobj = classobj(table._tablename, (PolyModel, ), myfields) 
+3120          elif isinstance(polymodel,Table): 
+3121              table._tableobj = classobj(table._tablename, (polymodel._tableobj, ), myfields) 
+3122          else: 
+3123              raise SyntaxError, "polymodel must be None, True, a table or a tablename" 
+3124          return None 
+
    3125   
+
    3126 -    def expand(self,expression,field_type=None): 
+
    3127          if isinstance(expression,Field): 
+3128              if expression.type in ('text','blob'): 
+3129                  raise SyntaxError, 'AppEngine does not index by: %s' % expression.type 
+3130              return expression.name 
+3131          elif isinstance(expression, (Expression, Query)): 
+3132              if not expression.second is None: 
+3133                  return expression.op(expression.first, expression.second) 
+3134              elif not expression.first is None: 
+3135                  return expression.op(expression.first) 
+3136              else: 
+3137                  return expression.op() 
+3138          elif field_type: 
+3139                  return self.represent(expression,field_type) 
+3140          elif isinstance(expression,(list,tuple)): 
+3141              return ','.join([self.represent(item,field_type) for item in expression]) 
+3142          else: 
+3143              return str(expression) 
+
    3144   
+3145      ### TODO from gql.py Expression 
+
    3146 -    def AND(self,first,second): 
+
    3147          a = self.expand(first) 
+3148          b = self.expand(second) 
+3149          if b[0].name=='__key__' and a[0].name!='__key__': 
+3150              return b+a 
+3151          return a+b 
+
    3152   
+
    3153 -    def EQ(self,first,second=None): 
+
    3154          if isinstance(second, Key): 
+3155              return [GAEF(first.name,'=',second,lambda a,b:a==b)] 
+3156          return [GAEF(first.name,'=',self.represent(second,first.type),lambda a,b:a==b)] 
+
    3157   
+
    3158 -    def NE(self,first,second=None): 
+
    3159          if first.type != 'id': 
+3160              return [GAEF(first.name,'!=',self.represent(second,first.type),lambda a,b:a!=b)] 
+3161          else: 
+3162              second = Key.from_path(first._tablename, long(second)) 
+3163              return [GAEF(first.name,'!=',second,lambda a,b:a!=b)] 
+
    3164   
+
    3165 -    def LT(self,first,second=None): 
+
    3166          if first.type != 'id': 
+3167              return [GAEF(first.name,'<',self.represent(second,first.type),lambda a,b:a<b)] 
+3168          else: 
+3169              second = Key.from_path(first._tablename, long(second)) 
+3170              return [GAEF(first.name,'<',second,lambda a,b:a<b)] 
+
    3171   
+
    3172 -    def LE(self,first,second=None): 
+
    3173          if first.type != 'id': 
+3174              return [GAEF(first.name,'<=',self.represent(second,first.type),lambda a,b:a<=b)] 
+3175          else: 
+3176              second = Key.from_path(first._tablename, long(second)) 
+3177              return [GAEF(first.name,'<=',second,lambda a,b:a<=b)] 
+
    3178   
+
    3179 -    def GT(self,first,second=None): 
+
    3180          if first.type != 'id' or second==0 or second == '0': 
+3181              return [GAEF(first.name,'>',self.represent(second,first.type),lambda a,b:a>b)] 
+3182          else: 
+3183              second = Key.from_path(first._tablename, long(second)) 
+3184              return [GAEF(first.name,'>',second,lambda a,b:a>b)] 
+
    3185   
+
    3186 -    def GE(self,first,second=None): 
+
    3187          if first.type != 'id': 
+3188              return [GAEF(first.name,'>=',self.represent(second,first.type),lambda a,b:a>=b)] 
+3189          else: 
+3190              second = Key.from_path(first._tablename, long(second)) 
+3191              return [GAEF(first.name,'>=',second,lambda a,b:a>=b)] 
+
    3192   
+
    3193 -    def INVERT(self,first): 
+
    3194          return '-%s' % first.name 
+
    3195   
+
    3196 -    def COMMA(self,first,second): 
+
    3197          return '%s, %s' % (self.expand(first),self.expand(second)) 
+
    3198   
+
    3199 -    def BELONGS(self,first,second=None): 
+
    3200          if not isinstance(second,(list, tuple)): 
+3201              raise SyntaxError, "Not supported" 
+3202          if first.type != 'id': 
+3203              return [GAEF(first.name,'in',self.represent(second,first.type),lambda a,b:a in b)] 
+3204          else: 
+3205              second = [Key.from_path(first._tablename, i) for i in second] 
+3206              return [GAEF(first.name,'in',second,lambda a,b:a in b)] 
+
    3207   
+
    3208 -    def CONTAINS(self,first,second): 
+
    3209          if not first.type.startswith('list:'): 
+3210              raise SyntaxError, "Not supported" 
+3211          return [GAEF(first.name,'=',self.expand(second,first.type[5:]),lambda a,b:a in b)] 
+
    3212   
+
    3213 -    def NOT(self,first): 
+
    3214          nops = { self.EQ: self.NE, 
+3215                   self.NE: self.EQ, 
+3216                   self.LT: self.GE, 
+3217                   self.GT: self.LE, 
+3218                   self.LE: self.GT, 
+3219                   self.GE: self.LT} 
+3220          if not isinstance(first,Query): 
+3221              raise SyntaxError, "Not suported" 
+3222          nop = nops.get(first.op,None) 
+3223          if not nop: 
+3224              raise SyntaxError, "Not suported %s" % first.op.__name__ 
+3225          first.op = nop 
+3226          return self.expand(first) 
+
    3227   
+
    3228 -    def truncate(self,table,mode): 
+
    3229          self.db(table._id > 0).delete() 
+
    3230   
+
    3231 -    def select_raw(self,query,fields=[],attributes={}): 
+
    3232          new_fields = [] 
+3233          for item in fields: 
+3234              if isinstance(item,SQLALL): 
+3235                  new_fields += item.table 
+3236              else: 
+3237                  new_fields.append(item) 
+3238          fields = new_fields 
+3239          if query: 
+3240              tablename = self.get_table(query) 
+3241          elif fields: 
+3242              tablename = fields[0].tablename 
+3243              query = fields[0].table._id>0 
+3244          else: 
+3245              raise SyntaxError, "Unable to determine a tablename" 
+3246          query = self.filter_tenant(query,[tablename]) 
+3247          tableobj = self.db[tablename]._tableobj 
+3248          items = tableobj.all() 
+3249          filters = self.expand(query) 
+3250          for filter in filters: 
+3251              if filter.name=='__key__' and filter.op=='>' and filter.value==0: 
+3252                  continue 
+3253              elif filter.name=='__key__' and filter.op=='=': 
+3254                  if filter.value==0: 
+3255                      items = [] 
+3256                  elif isinstance(filter.value, Key): 
+3257                      item = tableobj.get(filter.value) 
+3258                      items = (item and [item]) or [] 
+3259                  else: 
+3260                      item = tableobj.get_by_id(filter.value) 
+3261                      items = (item and [item]) or [] 
+3262              elif isinstance(items,list): # i.e. there is a single record! 
+3263                  items = [i for i in items if filter.apply(getattr(item,filter.name), 
+3264                                                            filter.value)] 
+3265              else: 
+3266                  if filter.name=='__key__': items.order('__key__') 
+3267                  items = items.filter('%s %s' % (filter.name,filter.op),filter.value) 
+3268          if not isinstance(items,list): 
+3269              if attributes.get('left', None): 
+3270                  raise SyntaxError, 'Set: no left join in appengine' 
+3271              if attributes.get('groupby', None): 
+3272                  raise SyntaxError, 'Set: no groupby in appengine' 
+3273              orderby = attributes.get('orderby', False) 
+3274              if orderby: 
+3275                  ### THIS REALLY NEEDS IMPROVEMENT !!! 
+3276                  if isinstance(orderby, (list, tuple)): 
+3277                      orderby = xorify(orderby) 
+3278                  if isinstance(orderby,Expression): 
+3279                      orderby = self.expand(orderby) 
+3280                  orders = orderby.split(', ') 
+3281                  for order in orders: 
+3282                      order={'-id':'-__key__','id':'__key__'}.get(order,order) 
+3283                      items = items.order(order) 
+3284              if attributes.get('limitby', None): 
+3285                  (lmin, lmax) = attributes['limitby'] 
+3286                  (limit, offset) = (lmax - lmin, lmin) 
+3287                  items = items.fetch(limit, offset=offset) 
+3288          fields = self.db[tablename].fields 
+3289          return (items, tablename, fields) 
+
    3290   
+
    3291 -    def select(self,query,fields,attributes): 
+
    3292          (items, tablename, fields) = self.select_raw(query,fields,attributes) 
+3293          # self.db['_lastsql'] = self._select(query,fields,attributes) 
+3294          rows = [ 
+3295              [t=='id' and int(item.key().id()) or getattr(item, t) for t in fields] 
+3296              for item in items] 
+3297          colnames = ['%s.%s' % (tablename, t) for t in fields] 
+3298          return self.parse(rows, colnames, False) 
+
    3299   
+3300   
+
    3301 -    def count(self,query,distinct=None): 
+
    3302          if distinct: 
+3303              raise RuntimeError, "COUNT DISTINCT not supported" 
+3304          (items, tablename, fields) = self.select_raw(query) 
+3305          # self.db['_lastsql'] = self._count(query) 
+3306          try: 
+3307              return len(items) 
+3308          except TypeError: 
+3309              return items.count(limit=None) 
+
    3310   
+
    3311 -    def delete(self,tablename, query): 
+
    3312          """ 
+3313          This function was changed on 2010-05-04 because according to 
+3314          http://code.google.com/p/googleappengine/issues/detail?id=3119 
+3315          GAE no longer support deleting more than 1000 records. 
+3316          """ 
+3317          # self.db['_lastsql'] = self._delete(tablename,query) 
+3318          (items, tablename, fields) = self.select_raw(query) 
+3319          # items can be one item or a query 
+3320          if not isinstance(items,list): 
+3321              counter = items.count(limit=None) 
+3322              leftitems = items.fetch(1000) 
+3323              while len(leftitems): 
+3324                  gae.delete(leftitems) 
+3325                  leftitems = items.fetch(1000) 
+3326          else: 
+3327              counter = len(items) 
+3328              gae.delete(items) 
+3329          return counter 
+
    3330   
+
    3331 -    def update(self,tablename,query,update_fields): 
+
    3332          # self.db['_lastsql'] = self._update(tablename,query,update_fields) 
+3333          (items, tablename, fields) = self.select_raw(query) 
+3334          counter = 0 
+3335          for item in items: 
+3336              for field, value in update_fields: 
+3337                  setattr(item, field.name, self.represent(value,field.type)) 
+3338              item.put() 
+3339              counter += 1 
+3340          logger.info(str(counter)) 
+3341          return counter 
+
    3342   
+
    3343 -    def insert(self,table,fields): 
+
    3344          dfields=dict((f.name,self.represent(v,f.type)) for f,v in fields) 
+3345          # table._db['_lastsql'] = self._insert(table,fields) 
+3346          tmp = table._tableobj(**dfields) 
+3347          tmp.put() 
+3348          rid = Reference(tmp.key().id()) 
+3349          (rid._table, rid._record) = (table, None) 
+3350          return rid 
+
    3351   
+
    3352 -    def bulk_insert(self,table,items): 
+
    3353          parsed_items = [] 
+3354          for item in items: 
+3355              dfields=dict((f.name,self.represent(v,f.type)) for f,v in item) 
+3356              parsed_items.append(table._tableobj(**dfields)) 
+3357          gae.put(parsed_items) 
+3358          return True 
+
    3359   
+
    3360 -def uuid2int(uuidv): 
+
    3361      return uuid.UUID(uuidv).int 
+
    3362   
+
    3363 -def int2uuid(n): 
+
    3364      return str(uuid.UUID(int=n)) 
+
    3365   
+
    3366 -class CouchDBAdapter(NoSQLAdapter): 
+
    3367      uploads_in_blob = True 
+3368      types = { 
+3369                  'boolean': bool, 
+3370                  'string': str, 
+3371                  'text': str, 
+3372                  'password': str, 
+3373                  'blob': str, 
+3374                  'upload': str, 
+3375                  'integer': long, 
+3376                  'double': float, 
+3377                  'date': datetime.date, 
+3378                  'time': datetime.time, 
+3379                  'datetime': datetime.datetime, 
+3380                  'id': long, 
+3381                  'reference': long, 
+3382                  'list:string': list, 
+3383                  'list:integer': list, 
+3384                  'list:reference': list, 
+3385          } 
+3386   
+
    3387 -    def file_exists(self, filename): pass 
+
    3388 -    def file_open(self, filename, mode='rb', lock=True): pass 
+
    3389 -    def file_close(self, fileobj, unlock=True): pass 
+
    3390   
+
    3391 -    def expand(self,expression,field_type=None): 
+
    3392          if isinstance(expression,Field): 
+3393              if expression.type=='id': 
+3394                  return "%s._id" % expression.tablename 
+3395          return BaseAdapter.expand(self,expression,field_type) 
+
    3396   
+
    3397 -    def AND(self,first,second): 
+
    3398          return '(%s && %s)' % (self.expand(first),self.expand(second)) 
+
    3399   
+
    3400 -    def OR(self,first,second): 
+
    3401          return '(%s || %s)' % (self.expand(first),self.expand(second)) 
+
    3402   
+
    3403 -    def EQ(self,first,second): 
+
    3404          if second is None: 
+3405              return '(%s == null)' % self.expand(first) 
+3406          return '(%s == %s)' % (self.expand(first),self.expand(second,first.type)) 
+
    3407   
+
    3408 -    def NE(self,first,second): 
+
    3409          if second is None: 
+3410              return '(%s != null)' % self.expand(first) 
+3411          return '(%s != %s)' % (self.expand(first),self.expand(second,first.type)) 
+
    3412   
+
    3413 -    def COMMA(self,first,second): 
+
    3414          return '%s + %s' % (self.expand(first),self.expand(second)) 
+
    3415   
+
    3416 -    def represent(self, obj, fieldtype): 
+
    3417          value = NoSQLAdapter.represent(self, obj, fieldtype) 
+3418          if fieldtype=='id': 
+3419              return repr(str(int(value))) 
+3420          return repr(not isinstance(value,unicode) and value or value.encode('utf8')) 
+
    3421   
+
    3422 -    def __init__(self,db,uri='couchdb://127.0.0.1:5984', 
+3423                   pool_size=0,folder=None,db_codec ='UTF-8', 
+3424                   credential_decoder=lambda x:x, driver_args={}, 
+3425                      adapter_args={}): 
+
    3426          self.db = db 
+3427          self.uri = uri 
+3428          self.dbengine = 'couchdb' 
+3429          self.folder = folder 
+3430          db['_lastsql'] = '' 
+3431          self.db_codec = 'UTF-8' 
+3432          self.pool_size = pool_size 
+3433   
+3434          url='http://'+uri[10:] 
+3435          def connect(url=url,driver_args=driver_args): 
+3436              return couchdb.Server(url,**driver_args) 
+
    3437          self.pool_connection(connect) 
+
    3438   
+
    3439 -    def create_table(self, table, migrate=True, fake_migrate=False, polymodel=None): 
+
    3440          if migrate: 
+3441              try: 
+3442                  self.connection.create(table._tablename) 
+3443              except: 
+3444                  pass 
+
    3445   
+
    3446 -    def insert(self,table,fields): 
+
    3447          id = uuid2int(web2py_uuid()) 
+3448          ctable = self.connection[table._tablename] 
+3449          values = dict((k.name,NoSQLAdapter.represent(self,v,k.type)) for k,v in fields) 
+3450          values['_id'] = str(id) 
+3451          ctable.save(values) 
+3452          return id 
+
    3453   
+
    3454 -    def _select(self,query,fields,attributes): 
+
    3455          if not isinstance(query,Query): 
+3456              raise SyntaxError, "Not Supported" 
+3457          for key in set(attributes.keys())-set(('orderby','groupby','limitby', 
+3458                                                 'required','cache','left', 
+3459                                                 'distinct','having')): 
+3460              raise SyntaxError, 'invalid select attribute: %s' % key 
+3461          new_fields=[] 
+3462          for item in fields: 
+3463              if isinstance(item,SQLALL): 
+3464                  new_fields += item.table 
+3465              else: 
+3466                  new_fields.append(item) 
+3467          def uid(fd): 
+3468              return fd=='id' and '_id' or fd 
+
    3469          def get(row,fd): 
+3470              return fd=='id' and int(row['_id']) or row.get(fd,None) 
+3471          fields = new_fields 
+3472          tablename = self.get_table(query) 
+3473          fieldnames = [f.name for f in (fields or self.db[tablename])] 
+3474          colnames = ['%s.%s' % (tablename,k) for k in fieldnames] 
+3475          fields = ','.join(['%s.%s' % (tablename,uid(f)) for f in fieldnames]) 
+3476          fn="function(%(t)s){if(%(query)s)emit(%(order)s,[%(fields)s]);}" %\ 
+3477              dict(t=tablename, 
+3478                   query=self.expand(query), 
+3479                   order='%s._id' % tablename, 
+3480                   fields=fields) 
+3481          return fn, colnames 
+3482   
+
    3483 -    def select(self,query,fields,attributes): 
+
    3484          if not isinstance(query,Query): 
+3485              raise SyntaxError, "Not Supported" 
+3486          fn, colnames = self._select(query,fields,attributes) 
+3487          tablename = colnames[0].split('.')[0] 
+3488          ctable = self.connection[tablename] 
+3489          rows = [cols['value'] for cols in ctable.query(fn)] 
+3490          return self.parse(rows, colnames, False) 
+
    3491   
+
    3492 -    def delete(self,tablename,query): 
+
    3493          if not isinstance(query,Query): 
+3494              raise SyntaxError, "Not Supported" 
+3495          if query.first.type=='id' and query.op==self.EQ: 
+3496              id = query.second 
+3497              tablename = query.first.tablename 
+3498              assert(tablename == query.first.tablename) 
+3499              ctable = self.connection[tablename] 
+3500              try: 
+3501                  del ctable[str(id)] 
+3502                  return 1 
+3503              except couchdb.http.ResourceNotFound: 
+3504                  return 0 
+3505          else: 
+3506              tablename = self.get_table(query) 
+3507              rows = self.select(query,[self.db[tablename]._id],{}) 
+3508              ctable = self.connection[tablename] 
+3509              for row in rows: 
+3510                  del ctable[str(row.id)] 
+3511              return len(rows) 
+
    3512   
+
    3513 -    def update(self,tablename,query,fields): 
+
    3514          if not isinstance(query,Query): 
+3515              raise SyntaxError, "Not Supported" 
+3516          if query.first.type=='id' and query.op==self.EQ: 
+3517              id = query.second 
+3518              tablename = query.first.tablename 
+3519              ctable = self.connection[tablename] 
+3520              try: 
+3521                  doc = ctable[str(id)] 
+3522                  for key,value in fields: 
+3523                      doc[key.name] = NoSQLAdapter.represent(self,value,self.db[tablename][key.name].type) 
+3524                  ctable.save(doc) 
+3525                  return 1 
+3526              except couchdb.http.ResourceNotFound: 
+3527                  return 0 
+3528          else: 
+3529              tablename = self.get_table(query) 
+3530              rows = self.select(query,[self.db[tablename]._id],{}) 
+3531              ctable = self.connection[tablename] 
+3532              table = self.db[tablename] 
+3533              for row in rows: 
+3534                  doc = ctable[str(row.id)] 
+3535                  for key,value in fields: 
+3536                      doc[key.name] = NoSQLAdapter.represent(self,value,table[key.name].type) 
+3537                  ctable.save(doc) 
+3538              return len(rows) 
+
    3539   
+
    3540 -    def count(self,query,distinct=None): 
+
    3541          if distinct: 
+3542              raise RuntimeError, "COUNT DISTINCT not supported" 
+3543          if not isinstance(query,Query): 
+3544              raise SyntaxError, "Not Supported" 
+3545          tablename = self.get_table(query) 
+3546          rows = self.select(query,[self.db[tablename]._id],{}) 
+3547          return len(rows) 
+
    3548   
+
    3549 -def cleanup(text): 
+
    3550      """ 
+3551      validates that the given text is clean: only contains [0-9a-zA-Z_] 
+3552      """ 
+3553   
+3554      if re.compile('[^0-9a-zA-Z_]').findall(text): 
+3555          raise SyntaxError, \ 
+3556              'only [0-9a-zA-Z_] allowed in table and field names, received %s' \ 
+3557              % text 
+3558      return text 
+
    3559   
+3560   
+
    3561 -class MongoDBAdapter(NoSQLAdapter): 
+
    3562      uploads_in_blob = True 
+3563      types = { 
+3564                  'boolean': bool, 
+3565                  'string': str, 
+3566                  'text': str, 
+3567                  'password': str, 
+3568                  'blob': str, 
+3569                  'upload': str, 
+3570                  'integer': long, 
+3571                  'double': float, 
+3572                  'date': datetime.date, 
+3573                  'time': datetime.time, 
+3574                  'datetime': datetime.datetime, 
+3575                  'id': long, 
+3576                  'reference': long, 
+3577                  'list:string': list, 
+3578                  'list:integer': list, 
+3579                  'list:reference': list, 
+3580          } 
+3581   
+
    3582 -    def __init__(self,db,uri='mongodb://127.0.0.1:5984/db', 
+3583                   pool_size=0,folder=None,db_codec ='UTF-8', 
+3584                   credential_decoder=lambda x:x, driver_args={}, 
+3585                      adapter_args={}): 
+
    3586          self.db = db 
+3587          self.uri = uri 
+3588          self.dbengine = 'mongodb' 
+3589          self.folder = folder 
+3590          db['_lastsql'] = '' 
+3591          self.db_codec = 'UTF-8' 
+3592          self.pool_size = pool_size 
+3593   
+3594          m = re.compile('^(?P<host>[^\:/]+)(\:(?P<port>[0-9]+))?/(?P<db>.+)$').match(self._uri[10:]) 
+3595          if not m: 
+3596              raise SyntaxError, "Invalid URI string in DAL: %s" % self._uri 
+3597          host = m.group('host') 
+3598          if not host: 
+3599              raise SyntaxError, 'mongodb: host name required' 
+3600          dbname = m.group('db') 
+3601          if not dbname: 
+3602              raise SyntaxError, 'mongodb: db name required' 
+3603          port = m.group('port') or 27017 
+3604          driver_args.update(dict(host=host,port=port)) 
+3605          def connect(dbname=dbname,driver_args=driver_args): 
+3606              return pymongo.Connection(**driver_args)[dbname] 
+
    3607          self.pool_connection(connect) 
+
    3608   
+
    3609 -    def insert(self,table,fields): 
+
    3610          ctable = self.connection[table._tablename] 
+3611          values = dict((k,self.represent(v,table[k].type)) for k,v in fields) 
+3612          ctable.insert(values) 
+3613          return uuid2int(id) 
+
    3614   
+3615   
+
    3616 -    def count(self,query): 
+
    3617          raise RuntimeError, "Not implemented" 
+
    3618   
+
    3619 -    def select(self,query,fields,attributes): 
+
    3620          raise RuntimeError, "Not implemented" 
+
    3621   
+
    3622 -    def delete(self,tablename, query): 
+
    3623          raise RuntimeError, "Not implemented" 
+
    3624   
+
    3625 -    def update(self,tablename,query,fields): 
+
    3626          raise RuntimeError, "Not implemented" 
+
    3627   
+3628   
+3629  ######################################################################## 
+3630  # end of adapters 
+3631  ######################################################################## 
+3632   
+3633  ADAPTERS = { 
+3634      'sqlite': SQLiteAdapter, 
+3635      'sqlite:memory': SQLiteAdapter, 
+3636      'mysql': MySQLAdapter, 
+3637      'postgres': PostgreSQLAdapter, 
+3638      'oracle': OracleAdapter, 
+3639      'mssql': MSSQLAdapter, 
+3640      'mssql2': MSSQL2Adapter, 
+3641      'db2': DB2Adapter, 
+3642      'teradata': TeradataAdapter, 
+3643      'informix': InformixAdapter, 
+3644      'firebird': FireBirdAdapter, 
+3645      'firebird_embedded': FireBirdAdapter, 
+3646      'ingres': IngresAdapter, 
+3647      'ingresu': IngresUnicodeAdapter, 
+3648      'sapdb': SAPDBAdapter, 
+3649      'cubrid': CubridAdapter, 
+3650      'jdbc:sqlite': JDBCSQLiteAdapter, 
+3651      'jdbc:sqlite:memory': JDBCSQLiteAdapter, 
+3652      'jdbc:postgres': JDBCPostgreSQLAdapter, 
+3653      'gae': GoogleDatastoreAdapter, # discouraged, for backward compatibility 
+3654      'google:datastore': GoogleDatastoreAdapter, 
+3655      'google:sql': GoogleSQLAdapter, 
+3656      'couchdb': CouchDBAdapter, 
+3657      'mongodb': MongoDBAdapter, 
+3658  } 
+3659   
+3660   
+
    3661 -def sqlhtml_validators(field): 
+
    3662      """ 
+3663      Field type validation, using web2py's validators mechanism. 
+3664   
+3665      makes sure the content of a field is in line with the declared 
+3666      fieldtype 
+3667      """ 
+3668      if not have_validators: 
+3669          return [] 
+3670      field_type, field_length = field.type, field.length 
+3671      if isinstance(field_type, SQLCustomType): 
+3672          if hasattr(field_type, 'validator'): 
+3673              return field_type.validator 
+3674          else: 
+3675              field_type = field_type.type 
+3676      elif not isinstance(field_type,str): 
+3677          return [] 
+3678      requires=[] 
+3679      def ff(r,id): 
+3680          row=r(id) 
+3681          if not row: 
+3682              return id 
+3683          elif hasattr(r, '_format') and isinstance(r._format,str): 
+3684              return r._format % row 
+3685          elif hasattr(r, '_format') and callable(r._format): 
+3686              return r._format(row) 
+3687          else: 
+3688              return id 
+
    3689      if field_type == 'string': 
+3690          requires.append(validators.IS_LENGTH(field_length)) 
+3691      elif field_type == 'text': 
+3692          requires.append(validators.IS_LENGTH(field_length)) 
+3693      elif field_type == 'password': 
+3694          requires.append(validators.IS_LENGTH(field_length)) 
+3695      elif field_type == 'double': 
+3696          requires.append(validators.IS_FLOAT_IN_RANGE(-1e100, 1e100)) 
+3697      elif field_type == 'integer': 
+3698          requires.append(validators.IS_INT_IN_RANGE(-1e100, 1e100)) 
+3699      elif field_type.startswith('decimal'): 
+3700          requires.append(validators.IS_DECIMAL_IN_RANGE(-10**10, 10**10)) 
+3701      elif field_type == 'date': 
+3702          requires.append(validators.IS_DATE()) 
+3703      elif field_type == 'time': 
+3704          requires.append(validators.IS_TIME()) 
+3705      elif field_type == 'datetime': 
+3706          requires.append(validators.IS_DATETIME()) 
+3707      elif field.db and field_type.startswith('reference') and \ 
+3708              field_type.find('.') < 0 and \ 
+3709              field_type[10:] in field.db.tables: 
+3710          referenced = field.db[field_type[10:]] 
+3711          def repr_ref(id, r=referenced, f=ff): return f(r, id) 
+3712          field.represent = field.represent or repr_ref 
+3713          if hasattr(referenced, '_format') and referenced._format: 
+3714              requires = validators.IS_IN_DB(field.db,referenced._id, 
+3715                                             referenced._format) 
+3716              if field.unique: 
+3717                  requires._and = validators.IS_NOT_IN_DB(field.db,field) 
+3718              if field.tablename == field_type[10:]: 
+3719                  return validators.IS_EMPTY_OR(requires) 
+3720              return requires 
+3721      elif field.db and field_type.startswith('list:reference') and \ 
+3722              field_type.find('.') < 0 and \ 
+3723              field_type[15:] in field.db.tables: 
+3724          referenced = field.db[field_type[15:]] 
+3725          def list_ref_repr(ids, r=referenced, f=ff): 
+3726              if not ids: 
+3727                  return None 
+3728              refs = r._db(r._id.belongs(ids)).select(r._id) 
+3729              return (refs and ', '.join(str(f(r,ref.id)) for ref in refs) or '') 
+3730          field.represent = field.represent or list_ref_repr 
+3731          if hasattr(referenced, '_format') and referenced._format: 
+3732              requires = validators.IS_IN_DB(field.db,referenced._id, 
+3733                                             referenced._format,multiple=True) 
+3734          else: 
+3735              requires = validators.IS_IN_DB(field.db,referenced._id, 
+3736                                             multiple=True) 
+3737          if field.unique: 
+3738              requires._and = validators.IS_NOT_IN_DB(field.db,field) 
+3739          return requires 
+3740      elif field_type.startswith('list:'): 
+3741          def repr_list(values): return', '.join(str(v) for v in (values or [])) 
+3742          field.represent = field.represent or repr_list 
+3743      if field.unique: 
+3744          requires.insert(0,validators.IS_NOT_IN_DB(field.db,field)) 
+3745      sff = ['in', 'do', 'da', 'ti', 'de', 'bo'] 
+3746      if field.notnull and not field_type[:2] in sff: 
+3747          requires.insert(0, validators.IS_NOT_EMPTY()) 
+3748      elif not field.notnull and field_type[:2] in sff and requires: 
+3749          requires[-1] = validators.IS_EMPTY_OR(requires[-1]) 
+3750      return requires 
+3751   
+3752   
+
    3753 -def bar_escape(item): 
+
    3754      return str(item).replace('|', '||') 
+
    3755   
+
    3756 -def bar_encode(items): 
+
    3757      return '|%s|' % '|'.join(bar_escape(item) for item in items if str(item).strip()) 
+
    3758   
+
    3759 -def bar_decode_integer(value): 
+
    3760      return [int(x) for x in value.split('|') if x.strip()] 
+
    3761   
+
    3762 -def bar_decode_string(value): 
+
    3763      return [x.replace('||', '|') for x in string_unpack.split(value[1:-1]) if x.strip()] 
+
    3764   
+3765   
+
    3766 -class Row(dict): 
+
    3767   
+3768      """ 
+3769      a dictionary that lets you do d['a'] as well as d.a 
+3770      this is only used to store a Row 
+3771      """ 
+3772   
+
    3773 -    def __getitem__(self, key): 
+
    3774          key=str(key) 
+3775          if key in self.get('_extra',{}): 
+3776              return self._extra[key] 
+3777          return dict.__getitem__(self, key) 
+
    3778   
+
    3779 -    def __call__(self,key): 
+
    3780          return self.__getitem__(key) 
+
    3781   
+
    3782 -    def __setitem__(self, key, value): 
+
    3783          dict.__setitem__(self, str(key), value) 
+
    3784   
+
    3785 -    def __getattr__(self, key): 
+
    3786          return self[key] 
+
    3787   
+
    3788 -    def __setattr__(self, key, value): 
+
    3789          self[key] = value 
+
    3790   
+
    3791 -    def __repr__(self): 
+
    3792          return '<Row ' + dict.__repr__(self) + '>' 
+
    3793   
+
    3794 -    def __int__(self): 
+
    3795          return dict.__getitem__(self,'id') 
+
    3796   
+
    3797 -    def __eq__(self,other): 
+
    3798          try: 
+3799              return self.as_dict() == other.as_dict() 
+3800          except AttributeError: 
+3801              return False 
+
    3802   
+
    3803 -    def __ne__(self,other): 
+
    3804          return not (self == other) 
+
    3805   
+
    3806 -    def __copy__(self): 
+
    3807          return Row(dict(self)) 
+
    3808   
+
    3809 -    def as_dict(self,datetime_to_str=False): 
+
    3810          SERIALIZABLE_TYPES = (str,unicode,int,long,float,bool,list) 
+3811          d = dict(self) 
+3812          for k in copy.copy(d.keys()): 
+3813              v=d[k] 
+3814              if d[k] is None: 
+3815                  continue 
+3816              elif isinstance(v,Row): 
+3817                  d[k]=v.as_dict() 
+3818              elif isinstance(v,Reference): 
+3819                  d[k]=int(v) 
+3820              elif isinstance(v,decimal.Decimal): 
+3821                  d[k]=float(v) 
+3822              elif isinstance(v, (datetime.date, datetime.datetime, datetime.time)): 
+3823                  if datetime_to_str: 
+3824                      d[k] = v.isoformat().replace('T',' ')[:19] 
+3825              elif not isinstance(v,SERIALIZABLE_TYPES): 
+3826                  del d[k] 
+3827          return d 
+
    3828   
+3829   
+
    3830 -def Row_unpickler(data): 
+
    3831      return Row(cPickle.loads(data)) 
+
    3832   
+
    3833 -def Row_pickler(data): 
+
    3834      return Row_unpickler, (cPickle.dumps(data.as_dict(datetime_to_str=False)),) 
+
    3835   
+3836  copy_reg.pickle(Row, Row_pickler, Row_unpickler) 
+3837   
+3838   
+3839  ################################################################################ 
+3840  # Everything below should be independent on the specifics of the 
+3841  # database and should for RDBMs and some NoSQL databases 
+3842  ################################################################################ 
+3843   
+
    3844 -class SQLCallableList(list): 
+
    3845 -    def __call__(self): 
+
    3846          return copy.copy(self) 
+
    3847   
+3848   
+
    3849 -class DAL(dict): 
+
    3850   
+3851      """ 
+3852      an instance of this class represents a database connection 
+3853   
+3854      Example:: 
+3855   
+3856         db = DAL('sqlite://test.db') 
+3857         db.define_table('tablename', Field('fieldname1'), 
+3858                                      Field('fieldname2')) 
+3859      """ 
+3860   
+3861      @staticmethod 
+
    3862 -    def set_folder(folder): 
+
    3863          """ 
+3864          # ## this allows gluon to set a folder for this thread 
+3865          # ## <<<<<<<<< Should go away as new DAL replaces old sql.py 
+3866          """ 
+3867          BaseAdapter.set_folder(folder) 
+
    3868   
+3869      @staticmethod 
+
    3870 -    def distributed_transaction_begin(*instances): 
+
    3871          if not instances: 
+3872              return 
+3873          thread_key = '%s.%s' % (socket.gethostname(), threading.currentThread()) 
+3874          keys = ['%s.%i' % (thread_key, i) for (i,db) in instances] 
+3875          instances = enumerate(instances) 
+3876          for (i, db) in instances: 
+3877              if not db._adapter.support_distributed_transaction(): 
+3878                  raise SyntaxError, \ 
+3879                      'distributed transaction not suported by %s' % db._dbname 
+3880          for (i, db) in instances: 
+3881              db._adapter.distributed_transaction_begin(keys[i]) 
+
    3882   
+3883      @staticmethod 
+
    3884 -    def distributed_transaction_commit(*instances): 
+
    3885          if not instances: 
+3886              return 
+3887          instances = enumerate(instances) 
+3888          thread_key = '%s.%s' % (socket.gethostname(), threading.currentThread()) 
+3889          keys = ['%s.%i' % (thread_key, i) for (i,db) in instances] 
+3890          for (i, db) in instances: 
+3891              if not db._adapter.support_distributed_transaction(): 
+3892                  raise SyntaxError, \ 
+3893                      'distributed transaction not suported by %s' % db._dbanme 
+3894          try: 
+3895              for (i, db) in instances: 
+3896                  db._adapter.prepare(keys[i]) 
+3897          except: 
+3898              for (i, db) in instances: 
+3899                  db._adapter.rollback_prepared(keys[i]) 
+3900              raise RuntimeError, 'failure to commit distributed transaction' 
+3901          else: 
+3902              for (i, db) in instances: 
+3903                  db._adapter.commit_prepared(keys[i]) 
+3904          return 
+
    3905   
+3906   
+
    3907 -    def __init__(self, uri='sqlite://dummy.db', pool_size=0, folder=None, 
+3908                   db_codec='UTF-8', check_reserved=None, 
+3909                   migrate=True, fake_migrate=False, 
+3910                   migrate_enabled=True, fake_migrate_all=False, 
+3911                   decode_credentials=False, driver_args=None, 
+3912                   adapter_args={}, attempts=5, auto_import=False): 
+
    3913          """ 
+3914          Creates a new Database Abstraction Layer instance. 
+3915   
+3916          Keyword arguments: 
+3917   
+3918          :uri: string that contains information for connecting to a database. 
+3919                 (default: 'sqlite://dummy.db') 
+3920          :pool_size: How many open connections to make to the database object. 
+3921          :folder: <please update me> 
+3922          :db_codec: string encoding of the database (default: 'UTF-8') 
+3923          :check_reserved: list of adapters to check tablenames and column names 
+3924                           against sql reserved keywords. (Default None) 
+3925   
+3926          * 'common' List of sql keywords that are common to all database types 
+3927                  such as "SELECT, INSERT". (recommended) 
+3928          * 'all' Checks against all known SQL keywords. (not recommended) 
+3929                  <adaptername> Checks against the specific adapters list of keywords 
+3930                  (recommended) 
+3931          * '<adaptername>_nonreserved' Checks against the specific adapters 
+3932                  list of nonreserved keywords. (if available) 
+3933          :migrate (defaults to True) sets default migrate behavior for all tables 
+3934          :fake_migrate (defaults to False) sets default fake_migrate behavior for all tables 
+3935          :migrate_enabled (defaults to True). If set to False disables ALL migrations 
+3936          :fake_migrate_all (defaults to False). If sets to True fake migrates ALL tables 
+3937          :attempts (defaults to 5). Number of times to attempt connecting 
+3938          """ 
+3939          if not decode_credentials: 
+3940              credential_decoder = lambda cred: cred 
+3941          else: 
+3942              credential_decoder = lambda cred: urllib.unquote(cred) 
+3943          if folder: 
+3944              self.set_folder(folder) 
+3945          self._uri = uri 
+3946          self._pool_size = pool_size 
+3947          self._db_codec = db_codec 
+3948          self._lastsql = '' 
+3949          self._timings = [] 
+3950          self._pending_references = {} 
+3951          self._request_tenant = 'request_tenant' 
+3952          self._common_fields = [] 
+3953          if not str(attempts).isdigit() or attempts < 0: 
+3954              attempts = 5 
+3955          if uri: 
+3956              uris = isinstance(uri,(list,tuple)) and uri or [uri] 
+3957              error = '' 
+3958              connected = False 
+3959              for k in range(attempts): 
+3960                  for uri in uris: 
+3961                      try: 
+3962                          if is_jdbc and not uri.startswith('jdbc:'): 
+3963                              uri = 'jdbc:'+uri 
+3964                          self._dbname = regex_dbname.match(uri).group() 
+3965                          if not self._dbname in ADAPTERS: 
+3966                              raise SyntaxError, "Error in URI '%s' or database not supported" % self._dbname 
+3967                          # notice that driver args or {} else driver_args defaults to {} global, not correct 
+3968                          args = (self,uri,pool_size,folder,db_codec,credential_decoder,driver_args or {}, adapter_args) 
+3969                          self._adapter = ADAPTERS[self._dbname](*args) 
+3970                          connected = True 
+3971                          break 
+3972                      except SyntaxError: 
+3973                          raise 
+3974                      except Exception, error: 
+3975                          sys.stderr.write('DEBUG_c: Exception %r' % ((Exception, error,),)) 
+3976                  if connected: 
+3977                      break 
+3978                  else: 
+3979                      time.sleep(1) 
+3980              if not connected: 
+3981                  raise RuntimeError, "Failure to connect, tried %d times:\n%s" % (attempts, error) 
+3982          else: 
+3983              args = (self,'None',0,folder,db_codec) 
+3984              self._adapter = BaseAdapter(*args) 
+3985              migrate = fake_migrate = False 
+3986          adapter = self._adapter 
+3987          self._uri_hash = hashlib.md5(adapter.uri).hexdigest() 
+3988          self.tables = SQLCallableList() 
+3989          self.check_reserved = check_reserved 
+3990          if self.check_reserved: 
+3991              from reserved_sql_keywords import ADAPTERS as RSK 
+3992              self.RSK = RSK 
+3993          self._migrate = migrate 
+3994          self._fake_migrate = fake_migrate 
+3995          self._migrate_enabled = migrate_enabled 
+3996          self._fake_migrate_all = fake_migrate_all 
+3997          if auto_import: 
+3998              self.import_table_definitions(adapter.folder) 
+
    3999   
+
    4000 -    def import_table_definitions(self,path,migrate=False,fake_migrate=False): 
+
    4001          pattern = os.path.join(path,self._uri_hash+'_*.table') 
+4002          for filename in glob.glob(pattern): 
+4003              tfile = self._adapter.file_open(filename, 'r') 
+4004              try: 
+4005                  sql_fields = cPickle.load(tfile) 
+4006                  name = filename[len(pattern)-7:-6] 
+4007                  mf = [(value['sortable'],Field(key,type=value['type'])) \ 
+4008                            for key, value in sql_fields.items()] 
+4009                  mf.sort(lambda a,b: cmp(a[0],b[0])) 
+4010                  self.define_table(name,*[item[1] for item in mf], 
+4011                                    **dict(migrate=migrate,fake_migrate=fake_migrate)) 
+4012              finally: 
+4013                  self._adapter.file_close(tfile) 
+
    4014   
+
    4015 -    def check_reserved_keyword(self, name): 
+
    4016          """ 
+4017          Validates ``name`` against SQL keywords 
+4018          Uses self.check_reserve which is a list of 
+4019          operators to use. 
+4020          self.check_reserved 
+4021          ['common', 'postgres', 'mysql'] 
+4022          self.check_reserved 
+4023          ['all'] 
+4024          """ 
+4025          for backend in self.check_reserved: 
+4026              if name.upper() in self.RSK[backend]: 
+4027                  raise SyntaxError, 'invalid table/column name "%s" is a "%s" reserved SQL keyword' % (name, backend.upper()) 
+
    4028   
+
    4029 -    def __contains__(self, tablename): 
+
    4030          if self.has_key(tablename): 
+4031              return True 
+4032          else: 
+4033              return False 
+
    4034   
+
    4035 -    def parse_as_rest(self,patterns,args,vars,query=None,nested_select=True): 
+
    4036          """ 
+4037          EXAMPLE: 
+4038   
+4039  db.define_table('person',Field('name'),Field('info')) 
+4040  db.define_table('pet',Field('person',db.person),Field('name'),Field('info')) 
+4041   
+4042  @request.restful() 
+4043  def index(): 
+4044      def GET(*kargs,**kvars): 
+4045          patterns = [ 
+4046              "/persons[person]", 
+4047              "/{person.name.startswith}", 
+4048              "/{person.name}/:field", 
+4049              "/{person.name}/pets[pet.person]", 
+4050              "/{person.name}/pet[pet.person]/{pet.name}", 
+4051              "/{person.name}/pet[pet.person]/{pet.name}/:field" 
+4052              ] 
+4053          parser = db.parse_as_rest(patterns,kargs,kvars) 
+4054          if parser.status == 200: 
+4055              return dict(content=parser.response) 
+4056          else: 
+4057              raise HTTP(parser.status,parser.error) 
+4058      def POST(table_name,**kvars): 
+4059          if table_name == 'person': 
+4060              return db.person.validate_and_insert(**kvars) 
+4061          elif table_name == 'pet': 
+4062              return db.pet.validate_and_insert(**kvars) 
+4063          else: 
+4064              raise HTTP(400) 
+4065      return locals() 
+4066          """ 
+4067   
+4068          db = self 
+4069          re1 = re.compile('^{[^\.]+\.[^\.]+(\.(lt|gt|le|ge|eq|ne|contains|startswith|year|month|day|hour|minute|second))?(\.not)?}$') 
+4070          re2 = re.compile('^.+\[.+\]$') 
+4071   
+4072          def auto_table(table,base='',depth=0): 
+4073              patterns = [] 
+4074              for field in db[table].fields: 
+4075                  if base: 
+4076                      tag = '%s/%s' % (base,field.replace('_','-')) 
+4077                  else: 
+4078                      tag = '/%s/%s' % (table.replace('_','-'),field.replace('_','-')) 
+4079                  f = db[table][field] 
+4080                  if not f.readable: continue 
+4081                  if f.type=='id' or 'slug' in field or f.type.startswith('reference'): 
+4082                      tag += '/{%s.%s}' % (table,field) 
+4083                      patterns.append(tag) 
+4084                      patterns.append(tag+'/:field') 
+4085                  elif f.type.startswith('boolean'): 
+4086                      tag += '/{%s.%s}' % (table,field) 
+4087                      patterns.append(tag) 
+4088                      patterns.append(tag+'/:field') 
+4089                  elif f.type.startswith('double') or f.type.startswith('integer'): 
+4090                      tag += '/{%s.%s.ge}/{%s.%s.lt}' % (table,field,table,field) 
+4091                      patterns.append(tag) 
+4092                      patterns.append(tag+'/:field') 
+4093                  elif f.type.startswith('list:'): 
+4094                      tag += '/{%s.%s.contains}' % (table,field) 
+4095                      patterns.append(tag) 
+4096                      patterns.append(tag+'/:field') 
+4097                  elif f.type in ('date','datetime'): 
+4098                      tag+= '/{%s.%s.year}' % (table,field) 
+4099                      patterns.append(tag) 
+4100                      patterns.append(tag+'/:field') 
+4101                      tag+='/{%s.%s.month}' % (table,field) 
+4102                      patterns.append(tag) 
+4103                      patterns.append(tag+'/:field') 
+4104                      tag+='/{%s.%s.day}' % (table,field) 
+4105                      patterns.append(tag) 
+4106                      patterns.append(tag+'/:field') 
+4107                  if f.type in ('datetime','time'): 
+4108                      tag+= '/{%s.%s.hour}' % (table,field) 
+4109                      patterns.append(tag) 
+4110                      patterns.append(tag+'/:field') 
+4111                      tag+='/{%s.%s.minute}' % (table,field) 
+4112                      patterns.append(tag) 
+4113                      patterns.append(tag+'/:field') 
+4114                      tag+='/{%s.%s.second}' % (table,field) 
+4115                      patterns.append(tag) 
+4116                      patterns.append(tag+'/:field') 
+4117                  if depth>0: 
+4118                      for rtable,rfield in db[table]._referenced_by: 
+4119                          tag+='/%s[%s.%s]' % (rtable,rtable,rfield) 
+4120                          patterns.append(tag) 
+4121                          patterns += auto_table(rtable,base=tag,depth=depth-1) 
+4122              return patterns 
+
    4123   
+4124          if patterns=='auto': 
+4125              patterns=[] 
+4126              for table in db.tables: 
+4127                  if not table.startswith('auth_'): 
+4128                      patterns += auto_table(table,base='',depth=1) 
+4129          else: 
+4130              i = 0 
+4131              while i<len(patterns): 
+4132                  pattern = patterns[i] 
+4133                  tokens = pattern.split('/') 
+4134                  if tokens[-1].startswith(':auto') and re2.match(tokens[-1]): 
+4135                      new_patterns = auto_table(tokens[-1][tokens[-1].find('[')+1:-1],'/'.join(tokens[:-1])) 
+4136                      patterns = patterns[:i]+new_patterns+patterns[i+1:] 
+4137                      i += len(new_patterns) 
+4138                  else: 
+4139                      i += 1 
+4140          if '/'.join(args) == 'patterns': 
+4141              return Row({'status':200,'pattern':'list', 
+4142                          'error':None,'response':patterns}) 
+4143          for pattern in patterns: 
+4144              otable=table=None 
+4145              dbset=db(query) 
+4146              i=0 
+4147              tags = pattern[1:].split('/') 
+4148              # print pattern 
+4149              if len(tags)!=len(args): 
+4150                  continue 
+4151              for tag in tags: 
+4152                  # print i, tag, args[i] 
+4153                  if re1.match(tag): 
+4154                      # print 're1:'+tag 
+4155                      tokens = tag[1:-1].split('.') 
+4156                      table, field = tokens[0], tokens[1] 
+4157                      if not otable or table == otable: 
+4158                          if len(tokens)==2 or tokens[2]=='eq': 
+4159                              query = db[table][field]==args[i] 
+4160                          elif tokens[2]=='ne': 
+4161                              query = db[table][field]!=args[i] 
+4162                          elif tokens[2]=='lt': 
+4163                              query = db[table][field]<args[i] 
+4164                          elif tokens[2]=='gt': 
+4165                              query = db[table][field]>args[i] 
+4166                          elif tokens[2]=='ge': 
+4167                              query = db[table][field]>=args[i] 
+4168                          elif tokens[2]=='le': 
+4169                              query = db[table][field]<=args[i] 
+4170                          elif tokens[2]=='year': 
+4171                              query = db[table][field].year()==args[i] 
+4172                          elif tokens[2]=='month': 
+4173                              query = db[table][field].month()==args[i] 
+4174                          elif tokens[2]=='day': 
+4175                              query = db[table][field].day()==args[i] 
+4176                          elif tokens[2]=='hour': 
+4177                              query = db[table][field].hour()==args[i] 
+4178                          elif tokens[2]=='minute': 
+4179                              query = db[table][field].minutes()==args[i] 
+4180                          elif tokens[2]=='second': 
+4181                              query = db[table][field].seconds()==args[i] 
+4182                          elif tokens[2]=='startswith': 
+4183                              query = db[table][field].startswith(args[i]) 
+4184                          elif tokens[2]=='contains': 
+4185                              query = db[table][field].contains(args[i]) 
+4186                          else: 
+4187                              raise RuntimeError, "invalid pattern: %s" % pattern 
+4188                          if len(tokens)==4 and tokens[3]=='not': 
+4189                              query = ~query 
+4190                          elif len(tokens)>=4: 
+4191                              raise RuntimeError, "invalid pattern: %s" % pattern 
+4192                          dbset=dbset(query) 
+4193                      else: 
+4194                          raise RuntimeError, "missing relation in pattern: %s" % pattern 
+4195                  elif otable and re2.match(tag) and args[i]==tag[:tag.find('[')]: 
+4196                      # print 're2:'+tag 
+4197                      ref = tag[tag.find('[')+1:-1] 
+4198                      if '.' in ref: 
+4199                          table,field = ref.split('.') 
+4200                          # print table,field 
+4201                          if nested_select: 
+4202                              try: 
+4203                                  dbset=db(db[table][field].belongs(dbset._select(db[otable]._id))) 
+4204                              except ValueError: 
+4205                                  return Row({'status':400,'pattern':pattern, 
+4206                                              'error':'invalid path','response':None}) 
+4207                          else: 
+4208                              items = [item.id for item in dbset.select(db[otable]._id)] 
+4209                              dbset=db(db[table][field].belongs(items)) 
+4210                      else: 
+4211                          dbset=dbset(db[ref]) 
+4212                  elif tag==':field' and table: 
+4213                      # # print 're3:'+tag 
+4214                      field = args[i] 
+4215                      if not field in db[table]: break 
+4216                      try: 
+4217                          item =  dbset.select(db[table][field],limitby=(0,1)).first() 
+4218                      except ValueError: 
+4219                          return Row({'status':400,'pattern':pattern, 
+4220                                      'error':'invalid path','response':None}) 
+4221                      if not item: 
+4222                          return Row({'status':404,'pattern':pattern, 
+4223                                      'error':'record not found','response':None}) 
+4224                      else: 
+4225                          return Row({'status':200,'response':item[field], 
+4226                                      'pattern':pattern}) 
+4227                  elif tag != args[i]: 
+4228                      break 
+4229                  otable = table 
+4230                  i += 1 
+4231                  if i==len(tags) and table: 
+4232                      otable,ofield = vars.get('order','%s.%s' % (table,field)).split('.',1) 
+4233                      try: 
+4234                          if otable[:1]=='~': orderby = ~db[otable[1:]][ofield] 
+4235                          else: orderby = db[otable][ofield] 
+4236                      except KeyError: 
+4237                          return Row({'status':400,'error':'invalid orderby','response':None}) 
+4238                      fields = [field for field in db[table] if field.readable] 
+4239                      count = dbset.count() 
+4240                      try: 
+4241                          limits = (int(vars.get('min',0)),int(vars.get('max',1000))) 
+4242                          if limits[0]<0 or limits[1]<limits[0]: raise ValueError 
+4243                      except ValueError: 
+4244                          Row({'status':400,'error':'invalid limits','response':None}) 
+4245                      if count > limits[1]-limits[0]: 
+4246                          Row({'status':400,'error':'too many records','response':None}) 
+4247                      try: 
+4248                          response = dbset.select(limitby=limits,orderby=orderby,*fields) 
+4249                      except ValueError: 
+4250                          return Row({'status':400,'pattern':pattern, 
+4251                                      'error':'invalid path','response':None}) 
+4252                      return Row({'status':200,'response':response,'pattern':pattern}) 
+4253          return Row({'status':400,'error':'no matching pattern','response':None}) 
+
    4254   
+4255   
+
    4256 -    def define_table( 
+4257          self, 
+4258          tablename, 
+4259          *fields, 
+4260          **args 
+4261          ): 
+
    4262   
+4263          for key in args: 
+4264              if key not in [ 
+4265                      'migrate', 
+4266                      'primarykey', 
+4267                      'fake_migrate', 
+4268                      'format', 
+4269                      'trigger_name', 
+4270                      'sequence_name', 
+4271                      'polymodel']: 
+4272                  raise SyntaxError, 'invalid table "%s" attribute: %s' % (tablename, key) 
+4273          migrate = self._migrate_enabled and args.get('migrate',self._migrate) 
+4274          fake_migrate = self._fake_migrate_all or args.get('fake_migrate',self._fake_migrate) 
+4275          format = args.get('format',None) 
+4276          trigger_name = args.get('trigger_name', None) 
+4277          sequence_name = args.get('sequence_name', None) 
+4278          primarykey=args.get('primarykey',None) 
+4279          polymodel=args.get('polymodel',None) 
+4280          if not isinstance(tablename,str): 
+4281              raise SyntaxError, "missing table name" 
+4282          tablename = cleanup(tablename) 
+4283          lowertablename = tablename.lower() 
+4284   
+4285          if tablename.startswith('_') or hasattr(self,lowertablename) or \ 
+4286                  regex_python_keywords.match(tablename): 
+4287              raise SyntaxError, 'invalid table name: %s' % tablename 
+4288          elif lowertablename in self.tables: 
+4289              raise SyntaxError, 'table already defined: %s' % tablename 
+4290          elif self.check_reserved: 
+4291              self.check_reserved_keyword(tablename) 
+4292   
+4293          if self._common_fields: 
+4294              fields = [f for f in fields] + [f for f in self._common_fields] 
+4295   
+4296          t = self[tablename] = Table(self, tablename, *fields, 
+4297                                      **dict(primarykey=primarykey, 
+4298                                      trigger_name=trigger_name, 
+4299                                      sequence_name=sequence_name)) 
+4300          # db magic 
+4301          if self._uri in (None,'None'): 
+4302              return t 
+4303   
+4304          t._create_references() 
+4305   
+4306          if migrate or self._adapter.dbengine=='google:datastore': 
+4307              try: 
+4308                  sql_locker.acquire() 
+4309                  self._adapter.create_table(t,migrate=migrate, 
+4310                                             fake_migrate=fake_migrate, 
+4311                                             polymodel=polymodel) 
+4312              finally: 
+4313                  sql_locker.release() 
+4314          else: 
+4315              t._dbt = None 
+4316          self.tables.append(tablename) 
+4317          t._format = format 
+4318          return t 
+
    4319   
+
    4320 -    def __iter__(self): 
+
    4321          for tablename in self.tables: 
+4322              yield self[tablename] 
+
    4323   
+
    4324 -    def __getitem__(self, key): 
+
    4325          return dict.__getitem__(self, str(key)) 
+
    4326   
+
    4327 -    def __setitem__(self, key, value): 
+
    4328          dict.__setitem__(self, str(key), value) 
+
    4329   
+
    4330 -    def __getattr__(self, key): 
+
    4331          return self[key] 
+
    4332   
+
    4333 -    def __setattr__(self, key, value): 
+
    4334          if key[:1]!='_' and key in self: 
+4335              raise SyntaxError, \ 
+4336                  'Object %s exists and cannot be redefined' % key 
+4337          self[key] = value 
+
    4338   
+
    4339 -    def __repr__(self): 
+
    4340          return '<DAL ' + dict.__repr__(self) + '>' 
+
    4341   
+
    4342 -    def __call__(self, query=None): 
+
    4343          if isinstance(query,Table): 
+4344              query = query._id>0 
+4345          elif isinstance(query,Field): 
+4346              query = query!=None 
+4347          return Set(self, query) 
+
    4348   
+
    4349 -    def commit(self): 
+
    4350          self._adapter.commit() 
+
    4351   
+
    4352 -    def rollback(self): 
+
    4353          self._adapter.rollback() 
+
    4354   
+
    4355 -    def executesql(self, query, placeholders=None, as_dict=False): 
+
    4356          """ 
+4357          placeholders is optional and will always be None when using DAL 
+4358          if using raw SQL with placeholders, placeholders may be 
+4359          a sequence of values to be substituted in 
+4360          or, *if supported by the DB driver*, a dictionary with keys 
+4361          matching named placeholders in your SQL. 
+4362   
+4363          Added 2009-12-05 "as_dict" optional argument. Will always be 
+4364          None when using DAL. If using raw SQL can be set to True 
+4365          and the results cursor returned by the DB driver will be 
+4366          converted to a sequence of dictionaries keyed with the db 
+4367          field names. Tested with SQLite but should work with any database 
+4368          since the cursor.description used to get field names is part of the 
+4369          Python dbi 2.0 specs. Results returned with as_dict = True are 
+4370          the same as those returned when applying .to_list() to a DAL query. 
+4371   
+4372          [{field1: value1, field2: value2}, {field1: value1b, field2: value2b}] 
+4373   
+4374          --bmeredyk 
+4375          """ 
+4376          if placeholders: 
+4377              self._adapter.execute(query, placeholders) 
+4378          else: 
+4379              self._adapter.execute(query) 
+4380          if as_dict: 
+4381              if not hasattr(self._adapter.cursor,'description'): 
+4382                  raise RuntimeError, "database does not support executesql(...,as_dict=True)" 
+4383              # Non-DAL legacy db query, converts cursor results to dict. 
+4384              # sequence of 7-item sequences. each sequence tells about a column. 
+4385              # first item is always the field name according to Python Database API specs 
+4386              columns = self._adapter.cursor.description 
+4387              # reduce the column info down to just the field names 
+4388              fields = [f[0] for f in columns] 
+4389              # will hold our finished resultset in a list 
+4390              data = self._adapter.cursor.fetchall() 
+4391              # convert the list for each row into a dictionary so it's 
+4392              # easier to work with. row['field_name'] rather than row[0] 
+4393              return [dict(zip(fields,row)) for row in data] 
+4394          # see if any results returned from database 
+4395          try: 
+4396              return self._adapter.cursor.fetchall() 
+4397          except: 
+4398              return None 
+
    4399   
+
    4400 -    def _update_referenced_by(self, other): 
+
    4401          for tablename in self.tables: 
+4402              by = self[tablename]._referenced_by 
+4403              by[:] = [item for item in by if not item[0] == other] 
+
    4404   
+
    4405 -    def export_to_csv_file(self, ofile, *args, **kwargs): 
+
    4406          for table in self.tables: 
+4407              ofile.write('TABLE %s\r\n' % table) 
+4408              self(self[table]._id > 0).select().export_to_csv_file(ofile, *args, **kwargs) 
+4409              ofile.write('\r\n\r\n') 
+4410          ofile.write('END') 
+
    4411   
+
    4412 -    def import_from_csv_file(self, ifile, id_map={}, null='<NULL>', 
+4413                               unique='uuid', *args, **kwargs): 
+
    4414          for line in ifile: 
+4415              line = line.strip() 
+4416              if not line: 
+4417                  continue 
+4418              elif line == 'END': 
+4419                  return 
+4420              elif not line.startswith('TABLE ') or not line[6:] in self.tables: 
+4421                  raise SyntaxError, 'invalid file format' 
+4422              else: 
+4423                  tablename = line[6:] 
+4424                  self[tablename].import_from_csv_file(ifile, id_map, null, 
+4425                                                       unique, *args, **kwargs) 
+
    4426   
+4427   
+
    4428 -class SQLALL(object): 
+
    4429      """ 
+4430      Helper class providing a comma-separated string having all the field names 
+4431      (prefixed by table name and '.') 
+4432   
+4433      normally only called from within gluon.sql 
+4434      """ 
+4435   
+
    4436 -    def __init__(self, table): 
+
    4437          self.table = table 
+
    4438   
+
    4439 -    def __str__(self): 
+
    4440          return ', '.join([str(field) for field in self.table]) 
+
    4441   
+4442   
+
    4443 -class Reference(int): 
+
    4444   
+
    4445 -    def __allocate(self): 
+
    4446          if not self._record: 
+4447              self._record = self._table[int(self)] 
+4448          if not self._record: 
+4449              raise RuntimeError, "Using a recursive select but encountered a broken reference: %s %d"%(self._table, int(self)) 
+
    4450   
+
    4451 -    def __getattr__(self, key): 
+
    4452          if key == 'id': 
+4453              return int(self) 
+4454          self.__allocate() 
+4455          return self._record.get(key, None) 
+
    4456   
+
    4457 -    def __setattr__(self, key, value): 
+
    4458          if key.startswith('_'): 
+4459              int.__setattr__(self, key, value) 
+4460              return 
+4461          self.__allocate() 
+4462          self._record[key] =  value 
+
    4463   
+
    4464 -    def __getitem__(self, key): 
+
    4465          if key == 'id': 
+4466              return int(self) 
+4467          self.__allocate() 
+4468          return self._record.get(key, None) 
+
    4469   
+
    4470 -    def __setitem__(self,key,value): 
+
    4471          self.__allocate() 
+4472          self._record[key] = value 
+
    4473   
+4474   
+
    4475 -def Reference_unpickler(data): 
+
    4476      return marshal.loads(data) 
+
    4477   
+
    4478 -def Reference_pickler(data): 
+
    4479      try: 
+4480          marshal_dump = marshal.dumps(int(data)) 
+4481      except AttributeError: 
+4482          marshal_dump = 'i%s' % struct.pack('<i', int(data)) 
+4483      return (Reference_unpickler, (marshal_dump,)) 
+
    4484   
+4485  copy_reg.pickle(Reference, Reference_pickler, Reference_unpickler) 
+4486   
+4487   
+
    4488 -class Table(dict): 
+
    4489   
+4490      """ 
+4491      an instance of this class represents a database table 
+4492   
+4493      Example:: 
+4494   
+4495          db = DAL(...) 
+4496          db.define_table('users', Field('name')) 
+4497          db.users.insert(name='me') # print db.users._insert(...) to see SQL 
+4498          db.users.drop() 
+4499      """ 
+4500   
+
    4501 -    def __init__( 
+4502          self, 
+4503          db, 
+4504          tablename, 
+4505          *fields, 
+4506          **args 
+4507          ): 
+
    4508          """ 
+4509          Initializes the table and performs checking on the provided fields. 
+4510   
+4511          Each table will have automatically an 'id'. 
+4512   
+4513          If a field is of type Table, the fields (excluding 'id') from that table 
+4514          will be used instead. 
+4515   
+4516          :raises SyntaxError: when a supplied field is of incorrect type. 
+4517          """ 
+4518          self._tablename = tablename 
+4519          self._sequence_name = args.get('sequence_name',None) or \ 
+4520              db and db._adapter.sequence_name(tablename) 
+4521          self._trigger_name = args.get('trigger_name',None) or \ 
+4522              db and db._adapter.trigger_name(tablename) 
+4523   
+4524          primarykey = args.get('primarykey', None) 
+4525          fieldnames,newfields=set(),[] 
+4526          if primarykey: 
+4527              if not isinstance(primarykey,list): 
+4528                  raise SyntaxError, \ 
+4529                      "primarykey must be a list of fields from table '%s'" \ 
+4530                      % tablename 
+4531              self._primarykey = primarykey             
+4532          elif not [f for f in fields if isinstance(f,Field) and f.type=='id']: 
+4533              field = Field('id', 'id') 
+4534              newfields.append(field) 
+4535              fieldnames.add('id') 
+4536              self._id = field 
+4537          for field in fields: 
+4538              if not isinstance(field, (Field, Table)): 
+4539                  raise SyntaxError, \ 
+4540                      'define_table argument is not a Field or Table: %s' % field 
+4541              elif isinstance(field, Field) and not field.name in fieldnames: 
+4542                  if hasattr(field, '_db'): 
+4543                      field = copy.copy(field) 
+4544                  newfields.append(field) 
+4545                  fieldnames.add(field.name) 
+4546                  if field.type=='id': 
+4547                      self._id = field 
+4548              elif isinstance(field, Table): 
+4549                  table = field 
+4550                  for field in table: 
+4551                      if not field.name in fieldnames and not field.type=='id': 
+4552                          newfields.append(copy.copy(field)) 
+4553                          fieldnames.add(field.name) 
+4554              else: 
+4555                  # let's ignore new fields with duplicated names!!! 
+4556                  pass 
+4557          fields = newfields 
+4558          self._db = db 
+4559          tablename = tablename 
+4560          self.fields = SQLCallableList() 
+4561          self.virtualfields = [] 
+4562          fields = list(fields) 
+4563   
+4564          if db and self._db._adapter.uploads_in_blob==True: 
+4565              for field in fields: 
+4566                  if isinstance(field, Field) and field.type == 'upload'\ 
+4567                          and field.uploadfield is True: 
+4568                      tmp = field.uploadfield = '%s_blob' % field.name 
+4569                      fields.append(self._db.Field(tmp, 'blob', default='')) 
+4570   
+4571          lower_fieldnames = set() 
+4572          reserved = dir(Table) + ['fields']  
+4573          for field in fields: 
+4574              if db and db.check_reserved: 
+4575                  db.check_reserved_keyword(field.name) 
+4576              elif field.name in reserved: 
+4577                  raise SyntaxError, "field name %s not allowed" % field.name 
+4578   
+4579              if field.name.lower() in lower_fieldnames: 
+4580                  raise SyntaxError, "duplicate field %s in table %s" \ 
+4581                      % (field.name, tablename) 
+4582              else: 
+4583                  lower_fieldnames.add(field.name.lower()) 
+4584   
+4585              self.fields.append(field.name) 
+4586              self[field.name] = field 
+4587              if field.type == 'id': 
+4588                  self['id'] = field 
+4589              field.tablename = field._tablename = tablename 
+4590              field.table = field._table = self 
+4591              field.db = field._db = self._db 
+4592              if self._db and field.type!='text' and \ 
+4593                      self._db._adapter.maxcharlength < field.length: 
+4594                  field.length = self._db._adapter.maxcharlength 
+4595              if field.requires == DEFAULT: 
+4596                  field.requires = sqlhtml_validators(field) 
+4597          self.ALL = SQLALL(self) 
+4598   
+4599          if hasattr(self,'_primarykey'): 
+4600              for k in self._primarykey: 
+4601                  if k not in self.fields: 
+4602                      raise SyntaxError, \ 
+4603                          "primarykey must be a list of fields from table '%s " % tablename 
+4604                  else: 
+4605                      self[k].notnull = True 
+
    4606   
+
    4607 -    def _validate(self,**vars): 
+
    4608          errors = Row() 
+4609          for key,value in vars.items(): 
+4610              value,error = self[key].validate(value) 
+4611              if error: 
+4612                  errors[key] = error 
+4613          return errors 
+
    4614   
+
    4615 -    def _create_references(self): 
+
    4616          pr = self._db._pending_references 
+4617          self._referenced_by = [] 
+4618          for fieldname in self.fields: 
+4619              field=self[fieldname] 
+4620              if isinstance(field.type,str) and field.type[:10] == 'reference ': 
+4621                  ref = field.type[10:].strip() 
+4622                  if not ref.split(): 
+4623                      raise SyntaxError, 'Table: reference to nothing: %s' %ref 
+4624                  refs = ref.split('.') 
+4625                  rtablename = refs[0] 
+4626                  if not rtablename in self._db: 
+4627                      pr[rtablename] = pr.get(rtablename,[]) + [field] 
+4628                      continue 
+4629                  rtable = self._db[rtablename] 
+4630                  if len(refs)==2: 
+4631                      rfieldname = refs[1] 
+4632                      if not hasattr(rtable,'_primarykey'): 
+4633                          raise SyntaxError,\ 
+4634                              'keyed tables can only reference other keyed tables (for now)' 
+4635                      if rfieldname not in rtable.fields: 
+4636                          raise SyntaxError,\ 
+4637                              "invalid field '%s' for referenced table '%s' in table '%s'" \ 
+4638                              % (rfieldname, rtablename, self._tablename) 
+4639                  rtable._referenced_by.append((self._tablename, field.name)) 
+4640          for referee in pr.get(self._tablename,[]): 
+4641              self._referenced_by.append((referee._tablename,referee.name)) 
+
    4642   
+
    4643 -    def _filter_fields(self, record, id=False): 
+
    4644          return dict([(k, v) for (k, v) in record.items() if k 
+4645                       in self.fields and (self[k].type!='id' or id)]) 
+
    4646   
+
    4647 -    def _build_query(self,key): 
+
    4648          """ for keyed table only """ 
+4649          query = None 
+4650          for k,v in key.iteritems(): 
+4651              if k in self._primarykey: 
+4652                  if query: 
+4653                      query = query & (self[k] == v) 
+4654                  else: 
+4655                      query = (self[k] == v) 
+4656              else: 
+4657                  raise SyntaxError, \ 
+4658                  'Field %s is not part of the primary key of %s' % \ 
+4659                  (k,self._tablename) 
+4660          return query 
+
    4661   
+
    4662 -    def __getitem__(self, key): 
+
    4663          if not key: 
+4664              return None 
+4665          elif isinstance(key, dict): 
+4666              """ for keyed table """ 
+4667              query = self._build_query(key) 
+4668              rows = self._db(query).select() 
+4669              if rows: 
+4670                  return rows[0] 
+4671              return None 
+4672          elif str(key).isdigit(): 
+4673              return self._db(self._id == key).select(limitby=(0,1)).first() 
+4674          elif key: 
+4675              return dict.__getitem__(self, str(key)) 
+
    4676   
+
    4677 -    def __call__(self, key=DEFAULT, **kwargs): 
+
    4678          if key!=DEFAULT: 
+4679              if isinstance(key, Query): 
+4680                  record = self._db(key).select(limitby=(0,1)).first() 
+4681              elif not str(key).isdigit(): 
+4682                  record = None 
+4683              else: 
+4684                  record = self._db(self._id == key).select(limitby=(0,1)).first() 
+4685              if record: 
+4686                  for k,v in kwargs.items(): 
+4687                      if record[k]!=v: return None 
+4688              return record 
+4689          elif kwargs: 
+4690              query = reduce(lambda a,b:a&b,[self[k]==v for k,v in kwargs.items()]) 
+4691              return self._db(query).select(limitby=(0,1)).first() 
+4692          else: 
+4693              return None 
+
    4694   
+
    4695 -    def __setitem__(self, key, value): 
+
    4696          if isinstance(key, dict) and isinstance(value, dict): 
+4697              """ option for keyed table """ 
+4698              if set(key.keys()) == set(self._primarykey): 
+4699                  value = self._filter_fields(value) 
+4700                  kv = {} 
+4701                  kv.update(value) 
+4702                  kv.update(key) 
+4703                  if not self.insert(**kv): 
+4704                      query = self._build_query(key) 
+4705                      self._db(query).update(**self._filter_fields(value)) 
+4706              else: 
+4707                  raise SyntaxError,\ 
+4708                      'key must have all fields from primary key: %s'%\ 
+4709                      (self._primarykey) 
+4710          elif str(key).isdigit(): 
+4711              if key == 0: 
+4712                  self.insert(**self._filter_fields(value)) 
+4713              elif not self._db(self._id == key)\ 
+4714                      .update(**self._filter_fields(value)): 
+4715                  raise SyntaxError, 'No such record: %s' % key 
+4716          else: 
+4717              if isinstance(key, dict): 
+4718                  raise SyntaxError,\ 
+4719                      'value must be a dictionary: %s' % value 
+4720              dict.__setitem__(self, str(key), value) 
+
    4721   
+
    4722 -    def __delitem__(self, key): 
+
    4723          if isinstance(key, dict): 
+4724              query = self._build_query(key) 
+4725              if not self._db(query).delete(): 
+4726                  raise SyntaxError, 'No such record: %s' % key 
+4727          elif not str(key).isdigit() or not self._db(self._id == key).delete(): 
+4728              raise SyntaxError, 'No such record: %s' % key 
+
    4729   
+
    4730 -    def __getattr__(self, key): 
+
    4731          return self[key] 
+
    4732   
+
    4733 -    def __setattr__(self, key, value): 
+
    4734          if key in self: 
+4735              raise SyntaxError, 'Object exists and cannot be redefined: %s' % key 
+4736          self[key] = value 
+
    4737   
+
    4738 -    def __iter__(self): 
+
    4739          for fieldname in self.fields: 
+4740              yield self[fieldname] 
+
    4741   
+
    4742 -    def __repr__(self): 
+
    4743          return '<Table ' + dict.__repr__(self) + '>' 
+
    4744   
+
    4745 -    def __str__(self): 
+
    4746          if self.get('_ot', None): 
+4747              return '%s AS %s' % (self._ot, self._tablename) 
+4748          return self._tablename 
+
    4749   
+
    4750 -    def _drop(self, mode = ''): 
+
    4751          return self._db._adapter._drop(self, mode) 
+
    4752   
+
    4753 -    def drop(self, mode = ''): 
+
    4754          return self._db._adapter.drop(self,mode) 
+
    4755   
+
    4756 -    def _listify(self,fields,update=False): 
+
    4757          new_fields = [] 
+4758          new_fields_names = [] 
+4759          for name in fields: 
+4760              if not name in self.fields: 
+4761                  if name != 'id': 
+4762                      raise SyntaxError, 'Field %s does not belong to the table' % name 
+4763              else: 
+4764                  new_fields.append((self[name],fields[name])) 
+4765                  new_fields_names.append(name) 
+4766          for ofield in self: 
+4767              if not ofield.name in new_fields_names: 
+4768                  if not update and ofield.default!=None: 
+4769                      new_fields.append((ofield,ofield.default)) 
+4770                  elif update and ofield.update!=None: 
+4771                      new_fields.append((ofield,ofield.update)) 
+4772          for ofield in self: 
+4773              if not ofield.name in new_fields_names and ofield.compute: 
+4774                  try: 
+4775                      new_fields.append((ofield,ofield.compute(Row(fields)))) 
+4776                  except KeyError: 
+4777                      pass 
+4778              if not update and ofield.required and not ofield.name in new_fields_names: 
+4779                  raise SyntaxError,'Table: missing required field: %s' % ofield.name 
+4780          return new_fields 
+
    4781   
+
    4782 -    def _insert(self, **fields): 
+
    4783          return self._db._adapter._insert(self,self._listify(fields)) 
+
    4784   
+
    4785 -    def insert(self, **fields): 
+
    4786          return self._db._adapter.insert(self,self._listify(fields)) 
+
    4787   
+
    4788 -    def validate_and_insert(self,**fields): 
+
    4789          response = Row() 
+4790          response.errors = self._validate(**fields) 
+4791          if not response.errors: 
+4792              response.id = self.insert(**fields) 
+4793          else: 
+4794              response.id = None 
+4795          return response 
+
    4796   
+
    4797 -    def update_or_insert(self, key=DEFAULT, **values): 
+
    4798          if key==DEFAULT: 
+4799              record = self(**values) 
+4800          else: 
+4801              record = self(key) 
+4802          if record: 
+4803              record.update_record(**values) 
+4804              newid = None 
+4805          else: 
+4806              newid = self.insert(**values) 
+4807          return newid 
+
    4808   
+
    4809 -    def bulk_insert(self, items): 
+
    4810          """ 
+4811          here items is a list of dictionaries 
+4812          """ 
+4813          items = [self._listify(item) for item in items] 
+4814          return self._db._adapter.bulk_insert(self,items) 
+
    4815   
+
    4816 -    def _truncate(self, mode = None): 
+
    4817          return self._db._adapter._truncate(self, mode) 
+
    4818   
+
    4819 -    def truncate(self, mode = None): 
+
    4820          return self._db._adapter.truncate(self, mode) 
+
    4821   
+
    4822 -    def import_from_csv_file( 
+4823          self, 
+4824          csvfile, 
+4825          id_map=None, 
+4826          null='<NULL>', 
+4827          unique='uuid', 
+4828          *args, **kwargs 
+4829          ): 
+
    4830          """ 
+4831          import records from csv file. Column headers must have same names as 
+4832          table fields. field 'id' is ignored. If column names read 'table.file' 
+4833          the 'table.' prefix is ignored. 
+4834          'unique' argument is a field which must be unique 
+4835          (typically a uuid field) 
+4836          """ 
+4837   
+4838          delimiter = kwargs.get('delimiter', ',') 
+4839          quotechar = kwargs.get('quotechar', '"') 
+4840          quoting = kwargs.get('quoting', csv.QUOTE_MINIMAL) 
+4841   
+4842          reader = csv.reader(csvfile, delimiter=delimiter, quotechar=quotechar, quoting=quoting) 
+4843          colnames = None 
+4844          if isinstance(id_map, dict): 
+4845              if not self._tablename in id_map: 
+4846                  id_map[self._tablename] = {} 
+4847              id_map_self = id_map[self._tablename] 
+4848   
+4849          def fix(field, value, id_map): 
+4850              if value == null: 
+4851                  value = None 
+4852              elif field.type=='blob': 
+4853                  value = base64.b64decode(value) 
+4854              elif field.type=='double': 
+4855                  if not value.strip(): 
+4856                      value = None 
+4857                  else: 
+4858                      value = float(value) 
+4859              elif field.type=='integer': 
+4860                  if not value.strip(): 
+4861                      value = None 
+4862                  else: 
+4863                      value = int(value) 
+4864              elif field.type.startswith('list:string'): 
+4865                  value = bar_decode_string(value) 
+4866              elif field.type.startswith('list:reference'): 
+4867                  ref_table = field.type[10:].strip() 
+4868                  value = [id_map[ref_table][int(v)] \ 
+4869                               for v in bar_decode_string(value)] 
+4870              elif field.type.startswith('list:'): 
+4871                  value = bar_decode_integer(value) 
+4872              elif id_map and field.type.startswith('reference'): 
+4873                  try: 
+4874                      value = id_map[field.type[9:].strip()][value] 
+4875                  except KeyError: 
+4876                      pass 
+4877              return (field.name, value) 
+
    4878   
+4879          def is_id(colname): 
+4880              if colname in self: 
+4881                  return self[colname].type == 'id' 
+4882              else: 
+4883                  return False 
+
    4884   
+4885          for line in reader: 
+4886              if not line: 
+4887                  break 
+4888              if not colnames: 
+4889                  colnames = [x.split('.',1)[-1] for x in line][:len(line)] 
+4890                  cols, cid = [], [] 
+4891                  for i,colname in enumerate(colnames): 
+4892                      if is_id(colname): 
+4893                          cid = i 
+4894                      else: 
+4895                          cols.append(i) 
+4896                      if colname == unique: 
+4897                          unique_idx = i 
+4898              else: 
+4899                  items = [fix(self[colnames[i]], line[i], id_map) \ 
+4900                               for i in cols if colnames[i] in self.fields] 
+4901                  # Validation. Check for duplicate of 'unique' &, 
+4902                  # if present, update instead of insert. 
+4903                  if not unique or unique not in colnames: 
+4904                      new_id = self.insert(**dict(items)) 
+4905                  else: 
+4906                      unique_value = line[unique_idx] 
+4907                      query = self._db[self][unique] == unique_value 
+4908                      record = self._db(query).select().first() 
+4909                      if record: 
+4910                          record.update_record(**dict(items)) 
+4911                          new_id = record[self._id.name] 
+4912                      else: 
+4913                          new_id = self.insert(**dict(items)) 
+4914                  if id_map and cid != []: 
+4915                      id_map_self[line[cid]] = new_id 
+4916   
+
    4917 -    def with_alias(self, alias): 
+
    4918          return self._db._adapter.alias(self,alias) 
+
    4919   
+
    4920 -    def on(self, query): 
+
    4921          return Expression(self._db,self._db._adapter.ON,self,query) 
+
    4922   
+4923   
+4924   
+
    4925 -class Expression(object): 
+
    4926   
+
    4927 -    def __init__( 
+4928          self, 
+4929          db, 
+4930          op, 
+4931          first=None, 
+4932          second=None, 
+4933          type=None, 
+4934          ): 
+
    4935   
+4936          self.db = db 
+4937          self.op = op 
+4938          self.first = first 
+4939          self.second = second 
+4940          ### self._tablename =  first._tablename ## CHECK 
+4941          if not type and first and hasattr(first,'type'): 
+4942              self.type = first.type 
+4943          else: 
+4944              self.type = type 
+
    4945   
+
    4946 -    def sum(self): 
+
    4947          return Expression(self.db, self.db._adapter.AGGREGATE, self, 'SUM', self.type) 
+
    4948   
+
    4949 -    def max(self): 
+
    4950          return Expression(self.db, self.db._adapter.AGGREGATE, self, 'MAX', self.type) 
+
    4951   
+
    4952 -    def min(self): 
+
    4953          return Expression(self.db, self.db._adapter.AGGREGATE, self, 'MIN', self.type) 
+
    4954   
+
    4955 -    def len(self): 
+
    4956          return Expression(self.db, self.db._adapter.AGGREGATE, self, 'LENGTH', 'integer') 
+
    4957   
+
    4958 -    def lower(self): 
+
    4959          return Expression(self.db, self.db._adapter.LOWER, self, None, self.type) 
+
    4960   
+
    4961 -    def upper(self): 
+
    4962          return Expression(self.db, self.db._adapter.UPPER, self, None, self.type) 
+
    4963   
+
    4964 -    def year(self): 
+
    4965          return Expression(self.db, self.db._adapter.EXTRACT, self, 'year', 'integer') 
+
    4966   
+
    4967 -    def month(self): 
+
    4968          return Expression(self.db, self.db._adapter.EXTRACT, self, 'month', 'integer') 
+
    4969   
+
    4970 -    def day(self): 
+
    4971          return Expression(self.db, self.db._adapter.EXTRACT, self, 'day', 'integer') 
+
    4972   
+
    4973 -    def hour(self): 
+
    4974          return Expression(self.db, self.db._adapter.EXTRACT, self, 'hour', 'integer') 
+
    4975   
+
    4976 -    def minutes(self): 
+
    4977          return Expression(self.db, self.db._adapter.EXTRACT, self, 'minute', 'integer') 
+
    4978   
+
    4979 -    def coalesce_zero(self): 
+
    4980              return Expression(self.db, self.db._adapter.COALESCE_ZERO, self, None, self.type) 
+
    4981   
+
    4982 -    def seconds(self): 
+
    4983          return Expression(self.db, self.db._adapter.EXTRACT, self, 'second', 'integer') 
+
    4984   
+
    4985 -    def __getslice__(self, start, stop): 
+
    4986          if start < 0: 
+4987              pos0 = '(%s - %d)' % (self.len(), abs(start) - 1) 
+4988          else: 
+4989              pos0 = start + 1 
+4990   
+4991          if stop < 0: 
+4992              length = '(%s - %d - %s)' % (self.len(), abs(stop) - 1, pos0) 
+4993          elif stop == sys.maxint: 
+4994              length = self.len() 
+4995          else: 
+4996              length = '(%s - %s)' % (stop + 1, pos0) 
+4997          return Expression(self.db,self.db._adapter.SUBSTRING, 
+4998                            self, (pos0, length), self.type) 
+
    4999   
+
    5000 -    def __getitem__(self, i): 
+
    5001          return self[i:i + 1] 
+
    5002   
+
    5003 -    def __str__(self): 
+
    5004          return self.db._adapter.expand(self,self.type) 
+
    5005   
+
    5006 -    def __or__(self, other):  # for use in sortby 
+
    5007          return Expression(self.db,self.db._adapter.COMMA,self,other,self.type) 
+
    5008   
+
    5009 -    def __invert__(self): 
+
    5010          if hasattr(self,'_op') and self.op == self.db._adapter.INVERT: 
+5011              return self.first 
+5012          return Expression(self.db,self.db._adapter.INVERT,self,type=self.type) 
+
    5013   
+
    5014 -    def __add__(self, other): 
+
    5015          return Expression(self.db,self.db._adapter.ADD,self,other,self.type) 
+
    5016   
+
    5017 -    def __sub__(self, other): 
+
    5018          if self.type == 'integer': 
+5019              result_type = 'integer' 
+5020          elif self.type in ['date','time','datetime','double']: 
+5021              result_type = 'double' 
+5022          else: 
+5023              raise SyntaxError, "subtraction operation not supported for type" 
+5024          return Expression(self.db,self.db._adapter.SUB,self,other, 
+5025                            result_type) 
+
    5026 -    def __mul__(self, other): 
+
    5027          return Expression(self.db,self.db._adapter.MUL,self,other,self.type) 
+
    5028   
+
    5029 -    def __div__(self, other): 
+
    5030          return Expression(self.db,self.db._adapter.DIV,self,other,self.type) 
+
    5031   
+
    5032 -    def __mod__(self, other): 
+
    5033          return Expression(self.db,self.db._adapter.MOD,self,other,self.type) 
+
    5034   
+
    5035 -    def __eq__(self, value): 
+
    5036          return Query(self.db, self.db._adapter.EQ, self, value) 
+
    5037   
+
    5038 -    def __ne__(self, value): 
+
    5039          return Query(self.db, self.db._adapter.NE, self, value) 
+
    5040   
+
    5041 -    def __lt__(self, value): 
+
    5042          return Query(self.db, self.db._adapter.LT, self, value) 
+
    5043   
+
    5044 -    def __le__(self, value): 
+
    5045          return Query(self.db, self.db._adapter.LE, self, value) 
+
    5046   
+
    5047 -    def __gt__(self, value): 
+
    5048          return Query(self.db, self.db._adapter.GT, self, value) 
+
    5049   
+
    5050 -    def __ge__(self, value): 
+
    5051          return Query(self.db, self.db._adapter.GE, self, value) 
+
    5052   
+
    5053 -    def like(self, value): 
+
    5054          return Query(self.db, self.db._adapter.LIKE, self, value) 
+
    5055   
+
    5056 -    def belongs(self, value): 
+
    5057          return Query(self.db, self.db._adapter.BELONGS, self, value) 
+
    5058   
+
    5059 -    def startswith(self, value): 
+
    5060          if not self.type in ('string', 'text'): 
+5061              raise SyntaxError, "startswith used with incompatible field type" 
+5062          return Query(self.db, self.db._adapter.STARTSWITH, self, value) 
+
    5063   
+
    5064 -    def endswith(self, value): 
+
    5065          if not self.type in ('string', 'text'): 
+5066              raise SyntaxError, "endswith used with incompatible field type" 
+5067          return Query(self.db, self.db._adapter.ENDSWITH, self, value) 
+
    5068   
+
    5069 -    def contains(self, value): 
+
    5070          if not self.type in ('string', 'text') and not self.type.startswith('list:'): 
+5071              raise SyntaxError, "contains used with incompatible field type" 
+5072          return Query(self.db, self.db._adapter.CONTAINS, self, value) 
+
    5073   
+
    5074 -    def with_alias(self,alias): 
+
    5075          return Expression(self.db,self.db._adapter.AS,self,alias,self.type) 
+
    5076   
+5077      # for use in both Query and sortby 
+5078   
+5079   
+
    5080 -class SQLCustomType(object): 
+
    5081      """ 
+5082      allows defining of custom SQL types 
+5083   
+5084      Example:: 
+5085   
+5086          decimal = SQLCustomType( 
+5087              type ='double', 
+5088              native ='integer', 
+5089              encoder =(lambda x: int(float(x) * 100)), 
+5090              decoder = (lambda x: Decimal("0.00") + Decimal(str(float(x)/100)) ) 
+5091              ) 
+5092   
+5093          db.define_table( 
+5094              'example', 
+5095              Field('value', type=decimal) 
+5096              ) 
+5097   
+5098      :param type: the web2py type (default = 'string') 
+5099      :param native: the backend type 
+5100      :param encoder: how to encode the value to store it in the backend 
+5101      :param decoder: how to decode the value retrieved from the backend 
+5102      :param validator: what validators to use ( default = None, will use the 
+5103          default validator for type) 
+5104      """ 
+5105   
+
    5106 -    def __init__( 
+5107          self, 
+5108          type='string', 
+5109          native=None, 
+5110          encoder=None, 
+5111          decoder=None, 
+5112          validator=None, 
+5113          _class=None, 
+5114          ): 
+
    5115   
+5116          self.type = type 
+5117          self.native = native 
+5118          self.encoder = encoder or (lambda x: x) 
+5119          self.decoder = decoder or (lambda x: x) 
+5120          self.validator = validator 
+5121          self._class = _class or type 
+
    5122   
+
    5123 -    def startswith(self, dummy=None): 
+
    5124          return False 
+
    5125   
+
    5126 -    def __getslice__(self, a=0, b=100): 
+
    5127          return None 
+
    5128   
+
    5129 -    def __getitem__(self, i): 
+
    5130          return None 
+
    5131   
+
    5132 -    def __str__(self): 
+
    5133          return self._class 
+
    5134   
+5135   
+
    5136 -class Field(Expression): 
+
    5137   
+5138      """ 
+5139      an instance of this class represents a database field 
+5140   
+5141      example:: 
+5142   
+5143          a = Field(name, 'string', length=32, default=None, required=False, 
+5144              requires=IS_NOT_EMPTY(), ondelete='CASCADE', 
+5145              notnull=False, unique=False, 
+5146              uploadfield=True, widget=None, label=None, comment=None, 
+5147              uploadfield=True, # True means store on disk, 
+5148                                # 'a_field_name' means store in this field in db 
+5149                                # False means file content will be discarded. 
+5150              writable=True, readable=True, update=None, authorize=None, 
+5151              autodelete=False, represent=None, uploadfolder=None, 
+5152              uploadseparate=False # upload to separate directories by uuid_keys 
+5153                                   # first 2 character and tablename.fieldname 
+5154                                   # False - old behavior 
+5155                                   # True - put uploaded file in 
+5156                                   #   <uploaddir>/<tablename>.<fieldname>/uuid_key[:2] 
+5157                                   #        directory) 
+5158   
+5159      to be used as argument of DAL.define_table 
+5160   
+5161      allowed field types: 
+5162      string, boolean, integer, double, text, blob, 
+5163      date, time, datetime, upload, password 
+5164   
+5165      strings must have a length of Adapter.maxcharlength by default (512 or 255 for mysql) 
+5166      fields should have a default or they will be required in SQLFORMs 
+5167      the requires argument is used to validate the field input in SQLFORMs 
+5168   
+5169      """ 
+5170   
+
    5171 -    def __init__( 
+5172          self, 
+5173          fieldname, 
+5174          type='string', 
+5175          length=None, 
+5176          default=DEFAULT, 
+5177          required=False, 
+5178          requires=DEFAULT, 
+5179          ondelete='CASCADE', 
+5180          notnull=False, 
+5181          unique=False, 
+5182          uploadfield=True, 
+5183          widget=None, 
+5184          label=None, 
+5185          comment=None, 
+5186          writable=True, 
+5187          readable=True, 
+5188          update=None, 
+5189          authorize=None, 
+5190          autodelete=False, 
+5191          represent=None, 
+5192          uploadfolder=None, 
+5193          uploadseparate=False, 
+5194          compute=None, 
+5195          custom_store=None, 
+5196          custom_retrieve=None, 
+5197          custom_delete=None, 
+5198          ): 
+
    5199          self.db = None 
+5200          self.op = None 
+5201          self.first = None 
+5202          self.second = None 
+5203          if not isinstance(fieldname,str): 
+5204              raise SyntaxError, "missing field name" 
+5205          if fieldname.startswith(':'): 
+5206              fieldname,readable,writable=fieldname[1:],False,False 
+5207          elif fieldname.startswith('.'): 
+5208              fieldname,readable,writable=fieldname[1:],False,False 
+5209          if '=' in fieldname: 
+5210              fieldname,default = fieldname.split('=',1) 
+5211          self.name = fieldname = cleanup(fieldname) 
+5212          if hasattr(Table,fieldname) or fieldname[0] == '_' or \ 
+5213                  regex_python_keywords.match(fieldname): 
+5214              raise SyntaxError, 'Field: invalid field name: %s' % fieldname 
+5215          if isinstance(type, Table): 
+5216              type = 'reference ' + type._tablename 
+5217          self.type = type  # 'string', 'integer' 
+5218          self.length = (length is None) and MAXCHARLENGTH or length 
+5219          if default==DEFAULT: 
+5220              self.default = update or None 
+5221          else: 
+5222              self.default = default 
+5223          self.required = required  # is this field required 
+5224          self.ondelete = ondelete.upper()  # this is for reference fields only 
+5225          self.notnull = notnull 
+5226          self.unique = unique 
+5227          self.uploadfield = uploadfield 
+5228          self.uploadfolder = uploadfolder 
+5229          self.uploadseparate = uploadseparate 
+5230          self.widget = widget 
+5231          self.label = label or ' '.join(item.capitalize() for item in fieldname.split('_')) 
+5232          self.comment = comment 
+5233          self.writable = writable 
+5234          self.readable = readable 
+5235          self.update = update 
+5236          self.authorize = authorize 
+5237          self.autodelete = autodelete 
+5238          if not represent and type in ('list:integer','list:string'): 
+5239              represent=lambda x: ', '.join(str(y) for y in x or []) 
+5240          self.represent = represent 
+5241          self.compute = compute 
+5242          self.isattachment = True 
+5243          self.custom_store = custom_store 
+5244          self.custom_retrieve = custom_retrieve 
+5245          self.custom_delete = custom_delete 
+5246          if self.label is None: 
+5247              self.label = ' '.join([x.capitalize() for x in 
+5248                                    fieldname.split('_')]) 
+5249          if requires is None: 
+5250              self.requires = [] 
+5251          else: 
+5252              self.requires = requires 
+
    5253   
+
    5254 -    def store(self, file, filename=None, path=None): 
+
    5255          if self.custom_store: 
+5256              return self.custom_store(file,filename,path) 
+5257          if not filename: 
+5258              filename = file.name 
+5259          filename = os.path.basename(filename.replace('/', os.sep)\ 
+5260                                          .replace('\\', os.sep)) 
+5261          m = re.compile('\.(?P<e>\w{1,5})$').search(filename) 
+5262          extension = m and m.group('e') or 'txt' 
+5263          uuid_key = web2py_uuid().replace('-', '')[-16:] 
+5264          encoded_filename = base64.b16encode(filename).lower() 
+5265          newfilename = '%s.%s.%s.%s' % \ 
+5266              (self._tablename, self.name, uuid_key, encoded_filename) 
+5267          newfilename = newfilename[:200] + '.' + extension 
+5268          if isinstance(self.uploadfield,Field): 
+5269              blob_uploadfield_name = self.uploadfield.uploadfield 
+5270              keys={self.uploadfield.name: newfilename, 
+5271                    blob_uploadfield_name: file.read()} 
+5272              self.uploadfield.table.insert(**keys) 
+5273          elif self.uploadfield == True: 
+5274              if path: 
+5275                  pass 
+5276              elif self.uploadfolder: 
+5277                  path = self.uploadfolder 
+5278              elif self.db._adapter.folder: 
+5279                  path = os.path.join(self.db._adapter.folder, '..', 'uploads') 
+5280              else: 
+5281                  raise RuntimeError, "you must specify a Field(...,uploadfolder=...)" 
+5282              if self.uploadseparate: 
+5283                  path = os.path.join(path,"%s.%s" % (self._tablename, self.name),uuid_key[:2]) 
+5284              if not os.path.exists(path): 
+5285                  os.makedirs(path) 
+5286              pathfilename = os.path.join(path, newfilename) 
+5287              dest_file = open(pathfilename, 'wb') 
+5288              try: 
+5289                  shutil.copyfileobj(file, dest_file) 
+5290              finally: 
+5291                  dest_file.close() 
+5292          return newfilename 
+
    5293   
+
    5294 -    def retrieve(self, name, path=None): 
+
    5295          if self.custom_retrieve: 
+5296              return self.custom_retrieve(name, path) 
+5297          import http 
+5298          if self.authorize or isinstance(self.uploadfield, str): 
+5299              row = self.db(self == name).select().first() 
+5300              if not row: 
+5301                  raise http.HTTP(404) 
+5302          if self.authorize and not self.authorize(row): 
+5303              raise http.HTTP(403) 
+5304          try: 
+5305              m = regex_content.match(name) 
+5306              if not m or not self.isattachment: 
+5307                  raise TypeError, 'Can\'t retrieve %s' % name 
+5308              filename = base64.b16decode(m.group('name'), True) 
+5309              filename = regex_cleanup_fn.sub('_', filename) 
+5310          except (TypeError, AttributeError): 
+5311              filename = name 
+5312          if isinstance(self.uploadfield, str):  # ## if file is in DB 
+5313              return (filename, cStringIO.StringIO(row[self.uploadfield] or '')) 
+5314          elif isinstance(self.uploadfield,Field): 
+5315              blob_uploadfield_name = self.uploadfield.uploadfield 
+5316              query = self.uploadfield == name 
+5317              data = self.uploadfield.table(query)[blob_uploadfield_name] 
+5318              return (filename, cStringIO.StringIO(data)) 
+5319          else: 
+5320              # ## if file is on filesystem 
+5321              if path: 
+5322                  pass 
+5323              elif self.uploadfolder: 
+5324                  path = self.uploadfolder 
+5325              else: 
+5326                  path = os.path.join(self.db._adapter.folder, '..', 'uploads') 
+5327              if self.uploadseparate: 
+5328                  t = m.group('table') 
+5329                  f = m.group('field') 
+5330                  u = m.group('uuidkey') 
+5331                  path = os.path.join(path,"%s.%s" % (t,f),u[:2]) 
+5332              return (filename, open(os.path.join(path, name), 'rb')) 
+
    5333   
+
    5334 -    def formatter(self, value): 
+
    5335          if value is None or not self.requires: 
+5336              return value 
+5337          if not isinstance(self.requires, (list, tuple)): 
+5338              requires = [self.requires] 
+5339          elif isinstance(self.requires, tuple): 
+5340              requires = list(self.requires) 
+5341          else: 
+5342              requires = copy.copy(self.requires) 
+5343          requires.reverse() 
+5344          for item in requires: 
+5345              if hasattr(item, 'formatter'): 
+5346                  value = item.formatter(value) 
+5347          return value 
+
    5348   
+
    5349 -    def validate(self, value): 
+
    5350          if not self.requires: 
+5351              return (value, None) 
+5352          requires = self.requires 
+5353          if not isinstance(requires, (list, tuple)): 
+5354              requires = [requires] 
+5355          for validator in requires: 
+5356              (value, error) = validator(value) 
+5357              if error: 
+5358                  return (value, error) 
+5359          return (value, None) 
+
    5360   
+
    5361 -    def count(self): 
+
    5362          return Expression(self.db, self.db._adapter.AGGREGATE, self, 'COUNT', 'integer') 
+
    5363   
+
    5364 -    def __nonzero__(self): 
+
    5365          return True 
+
    5366   
+
    5367 -    def __str__(self): 
+
    5368          try: 
+5369              return '%s.%s' % (self.tablename, self.name) 
+5370          except: 
+5371              return '<no table>.%s' % self.name 
+
    5372   
+5373   
+
    5374 -class Query(object): 
+
    5375   
+5376      """ 
+5377      a query object necessary to define a set. 
+5378      it can be stored or can be passed to DAL.__call__() to obtain a Set 
+5379   
+5380      Example:: 
+5381   
+5382          query = db.users.name=='Max' 
+5383          set = db(query) 
+5384          records = set.select() 
+5385   
+5386      """ 
+5387   
+
    5388 -    def __init__( 
+5389          self, 
+5390          db, 
+5391          op, 
+5392          first=None, 
+5393          second=None, 
+5394          ): 
+
    5395          self.db = db 
+5396          self.op = op 
+5397          self.first = first 
+5398          self.second = second 
+
    5399   
+
    5400 -    def __str__(self): 
+
    5401          return self.db._adapter.expand(self) 
+
    5402   
+
    5403 -    def __and__(self, other): 
+
    5404          return Query(self.db,self.db._adapter.AND,self,other) 
+
    5405   
+
    5406 -    def __or__(self, other): 
+
    5407          return Query(self.db,self.db._adapter.OR,self,other) 
+
    5408   
+
    5409 -    def __invert__(self): 
+
    5410          if self.op==self.db._adapter.NOT: 
+5411              return self.first 
+5412          return Query(self.db,self.db._adapter.NOT,self) 
+
    5413   
+5414   
+5415  regex_quotes = re.compile("'[^']*'") 
+5416   
+5417   
+
    5418 -def xorify(orderby): 
+
    5419      if not orderby: 
+5420          return None 
+5421      orderby2 = orderby[0] 
+5422      for item in orderby[1:]: 
+5423          orderby2 = orderby2 | item 
+5424      return orderby2 
+
    5425   
+5426   
+
    5427 -class Set(object): 
+
    5428   
+5429      """ 
+5430      a Set represents a set of records in the database, 
+5431      the records are identified by the query=Query(...) object. 
+5432      normally the Set is generated by DAL.__call__(Query(...)) 
+5433   
+5434      given a set, for example 
+5435         set = db(db.users.name=='Max') 
+5436      you can: 
+5437         set.update(db.users.name='Massimo') 
+5438         set.delete() # all elements in the set 
+5439         set.select(orderby=db.users.id, groupby=db.users.name, limitby=(0,10)) 
+5440      and take subsets: 
+5441         subset = set(db.users.id<5) 
+5442      """ 
+5443   
+
    5444 -    def __init__(self, db, query): 
+
    5445          self.db = db 
+5446          self._db = db # for backward compatibility 
+5447          self.query = query 
+
    5448   
+
    5449 -    def __call__(self, query): 
+
    5450          if isinstance(query,Table): 
+5451              query = query._id>0 
+5452          elif isinstance(query,Field): 
+5453              query = query!=None 
+5454          if self.query: 
+5455              return Set(self.db, self.query & query) 
+5456          else: 
+5457              return Set(self.db, query) 
+
    5458   
+
    5459 -    def _count(self,distinct=None): 
+
    5460          return self.db._adapter._count(self.query,distinct) 
+
    5461   
+
    5462 -    def _select(self, *fields, **attributes): 
+
    5463          return self.db._adapter._select(self.query,fields,attributes) 
+
    5464   
+
    5465 -    def _delete(self): 
+
    5466          tablename=self.db._adapter.get_table(self.query) 
+5467          return self.db._adapter._delete(tablename,self.query) 
+
    5468   
+
    5469 -    def _update(self, **update_fields): 
+
    5470          tablename = self.db._adapter.get_table(self.query) 
+5471          fields = self.db[tablename]._listify(update_fields,update=True) 
+5472          return self.db._adapter._update(tablename,self.query,fields) 
+
    5473   
+
    5474 -    def isempty(self): 
+
    5475          return not self.select(limitby=(0,1)) 
+
    5476   
+
    5477 -    def count(self,distinct=None): 
+
    5478          return self.db._adapter.count(self.query,distinct) 
+
    5479   
+
    5480 -    def select(self, *fields, **attributes): 
+
    5481          return self.db._adapter.select(self.query,fields,attributes) 
+
    5482   
+
    5483 -    def delete(self): 
+
    5484          tablename=self.db._adapter.get_table(self.query) 
+5485          self.delete_uploaded_files() 
+5486          return self.db._adapter.delete(tablename,self.query) 
+
    5487   
+
    5488 -    def update(self, **update_fields): 
+
    5489          tablename = self.db._adapter.get_table(self.query) 
+5490          fields = self.db[tablename]._listify(update_fields,update=True) 
+5491          if not fields: 
+5492              raise SyntaxError, "No fields to update" 
+5493          self.delete_uploaded_files(update_fields) 
+5494          return self.db._adapter.update(tablename,self.query,fields) 
+
    5495       
+
    5496 -    def validate_and_update(self, **update_fields): 
+
    5497          tablename = self.db._adapter.get_table(self.query) 
+5498          response = Row() 
+5499          response.errors = self.db[tablename]._validate(**update_fields)  
+5500          fields = self.db[tablename]._listify(update_fields,update=True) 
+5501          if not fields: 
+5502              raise SyntaxError, "No fields to update" 
+5503          self.delete_uploaded_files(update_fields) 
+5504          if not response.errors: 
+5505              response.updated = self.db._adapter.update(tablename,self.query,fields) 
+5506          else: 
+5507              response.updated = None 
+5508          return response 
+
    5509   
+
    5510 -    def delete_uploaded_files(self, upload_fields=None): 
+
    5511          table = self.db[self.db._adapter.tables(self.query)[0]] 
+5512          # ## mind uploadfield==True means file is not in DB 
+5513          if upload_fields: 
+5514              fields = upload_fields.keys() 
+5515          else: 
+5516              fields = table.fields 
+5517          fields = [f for f in fields if table[f].type == 'upload' 
+5518                     and table[f].uploadfield == True 
+5519                     and table[f].autodelete] 
+5520          if not fields: 
+5521              return 
+5522          for record in self.select(*[table[f] for f in fields]): 
+5523              for fieldname in fields: 
+5524                  field = table[fieldname] 
+5525                  oldname = record.get(fieldname, None) 
+5526                  if not oldname: 
+5527                      continue 
+5528                  if upload_fields and oldname == upload_fields[fieldname]: 
+5529                      continue 
+5530                  if field.custom_delete: 
+5531                      field.custom_delete(oldname) 
+5532                  else: 
+5533                      uploadfolder = field.uploadfolder 
+5534                      if not uploadfolder: 
+5535                          uploadfolder = os.path.join(self.db._adapter.folder, '..', 'uploads') 
+5536                      if field.uploadseparate: 
+5537                          items = oldname.split('.') 
+5538                          uploadfolder = os.path.join(uploadfolder, 
+5539                                                      "%s.%s" % (items[0], items[1]), 
+5540                                                      items[2][:2])                 
+5541                      oldpath = os.path.join(uploadfolder, oldname) 
+5542                      if os.path.exists(oldpath): 
+5543                          os.unlink(oldpath) 
+
    5544   
+
    5545 -def update_record(pack, a={}): 
+
    5546      (colset, table, id) = pack 
+5547      b = a or dict(colset) 
+5548      c = dict([(k,v) for (k,v) in b.items() if k in table.fields and table[k].type!='id']) 
+5549      table._db(table._id==id).update(**c) 
+5550      for (k, v) in c.items(): 
+5551          colset[k] = v 
+
    5552   
+5553   
+
    5554 -class Rows(object): 
+
    5555   
+5556      """ 
+5557      A wrapper for the return value of a select. It basically represents a table. 
+5558      It has an iterator and each row is represented as a dictionary. 
+5559      """ 
+5560   
+5561      # ## TODO: this class still needs some work to care for ID/OID 
+5562   
+
    5563 -    def __init__( 
+5564          self, 
+5565          db=None, 
+5566          records=[], 
+5567          colnames=[], 
+5568          compact=True, 
+5569          rawrows=None 
+5570          ): 
+
    5571          self.db = db 
+5572          self.records = records 
+5573          self.colnames = colnames 
+5574          self.compact = compact 
+5575          self.response = rawrows 
+
    5576   
+
    5577 -    def setvirtualfields(self,**keyed_virtualfields): 
+
    5578          if not keyed_virtualfields: 
+5579              return self 
+5580          for row in self.records: 
+5581              for (tablename,virtualfields) in keyed_virtualfields.items(): 
+5582                  attributes = dir(virtualfields) 
+5583                  virtualfields.__dict__.update(row) 
+5584                  if not tablename in row: 
+5585                      box = row[tablename] = Row() 
+5586                  else: 
+5587                      box = row[tablename] 
+5588                  for attribute in attributes: 
+5589                      if attribute[0] != '_': 
+5590                          method = getattr(virtualfields,attribute) 
+5591                          if hasattr(method,'im_func') and method.im_func.func_code.co_argcount: 
+5592                              box[attribute]=method() 
+5593          return self 
+
    5594   
+
    5595 -    def __and__(self,other): 
+
    5596          if self.colnames!=other.colnames: raise Exception, 'Cannot & incompatible Rows objects' 
+5597          records = self.records+other.records 
+5598          return Rows(self.db,records,self.colnames) 
+
    5599   
+
    5600 -    def __or__(self,other): 
+
    5601          if self.colnames!=other.colnames: raise Exception, 'Cannot | incompatible Rows objects' 
+5602          records = self.records 
+5603          records += [record for record in other.records \ 
+5604                          if not record in records] 
+5605          return Rows(self.db,records,self.colnames) 
+
    5606   
+
    5607 -    def __nonzero__(self): 
+
    5608          if len(self.records): 
+5609              return 1 
+5610          return 0 
+
    5611   
+
    5612 -    def __len__(self): 
+
    5613          return len(self.records) 
+
    5614   
+
    5615 -    def __getslice__(self, a, b): 
+
    5616          return Rows(self.db,self.records[a:b],self.colnames) 
+
    5617   
+
    5618 -    def __getitem__(self, i): 
+
    5619          row = self.records[i] 
+5620          keys = row.keys() 
+5621          if self.compact and len(keys) == 1 and keys[0] != '_extra': 
+5622              return row[row.keys()[0]] 
+5623          return row 
+
    5624   
+
    5625 -    def __iter__(self): 
+
    5626          """ 
+5627          iterator over records 
+5628          """ 
+5629   
+5630          for i in xrange(len(self)): 
+5631              yield self[i] 
+
    5632   
+
    5633 -    def __str__(self): 
+
    5634          """ 
+5635          serializes the table into a csv file 
+5636          """ 
+5637   
+5638          s = cStringIO.StringIO() 
+5639          self.export_to_csv_file(s) 
+5640          return s.getvalue() 
+
    5641   
+
    5642 -    def first(self): 
+
    5643          if not self.records: 
+5644              return None 
+5645          return self[0] 
+
    5646   
+
    5647 -    def last(self): 
+
    5648          if not self.records: 
+5649              return None 
+5650          return self[-1] 
+
    5651   
+
    5652 -    def find(self,f): 
+
    5653          """ 
+5654          returns a new Rows object, a subset of the original object, 
+5655          filtered by the function f 
+5656          """ 
+5657          if not self.records: 
+5658              return Rows(self.db, [], self.colnames) 
+5659          records = [] 
+5660          for i in range(0,len(self)): 
+5661              row = self[i] 
+5662              if f(row): 
+5663                  records.append(self.records[i]) 
+5664          return Rows(self.db, records, self.colnames) 
+
    5665   
+
    5666 -    def exclude(self, f): 
+
    5667          """ 
+5668          removes elements from the calling Rows object, filtered by the function f, 
+5669          and returns a new Rows object containing the removed elements 
+5670          """ 
+5671          if not self.records: 
+5672              return Rows(self.db, [], self.colnames) 
+5673          removed = [] 
+5674          i=0 
+5675          while i<len(self): 
+5676              row = self[i] 
+5677              if f(row): 
+5678                  removed.append(self.records[i]) 
+5679                  del self.records[i] 
+5680              else: 
+5681                  i += 1 
+5682          return Rows(self.db, removed, self.colnames) 
+
    5683   
+
    5684 -    def sort(self, f, reverse=False): 
+
    5685          """ 
+5686          returns a list of sorted elements (not sorted in place) 
+5687          """ 
+5688          return Rows(self.db,sorted(self,key=f,reverse=reverse),self.colnames) 
+
    5689   
+
    5690 -    def as_list(self, 
+5691                  compact=True, 
+5692                  storage_to_dict=True, 
+5693                  datetime_to_str=True): 
+
    5694          """ 
+5695          returns the data as a list or dictionary. 
+5696          :param storage_to_dict: when True returns a dict, otherwise a list(default True) 
+5697          :param datetime_to_str: convert datetime fields as strings (default True) 
+5698          """ 
+5699          (oc, self.compact) = (self.compact, compact) 
+5700          if storage_to_dict: 
+5701              items = [item.as_dict(datetime_to_str) for item in self] 
+5702          else: 
+5703              items = [item for item in self] 
+5704          self.compact = compact 
+5705          return items 
+
    5706   
+5707   
+
    5708 -    def as_dict(self, 
+5709                  key='id', 
+5710                  compact=True, 
+5711                  storage_to_dict=True, 
+5712                  datetime_to_str=True): 
+
    5713          """ 
+5714          returns the data as a dictionary of dictionaries (storage_to_dict=True) or records (False) 
+5715   
+5716          :param key: the name of the field to be used as dict key, normally the id 
+5717          :param compact: ? (default True) 
+5718          :param storage_to_dict: when True returns a dict, otherwise a list(default True) 
+5719          :param datetime_to_str: convert datetime fields as strings (default True) 
+5720          """ 
+5721          rows = self.as_list(compact, storage_to_dict, datetime_to_str) 
+5722          if isinstance(key,str) and key.count('.')==1: 
+5723              (table, field) = key.split('.') 
+5724              return dict([(r[table][field],r) for r in rows]) 
+5725          elif isinstance(key,str): 
+5726              return dict([(r[key],r) for r in rows]) 
+5727          else: 
+5728              return dict([(key(r),r) for r in rows]) 
+
    5729   
+
    5730 -    def export_to_csv_file(self, ofile, null='<NULL>', *args, **kwargs): 
+
    5731          """ 
+5732          export data to csv, the first line contains the column names 
+5733   
+5734          :param ofile: where the csv must be exported to 
+5735          :param null: how null values must be represented (default '<NULL>') 
+5736          :param delimiter: delimiter to separate values (default ',') 
+5737          :param quotechar: character to use to quote string values (default '"') 
+5738          :param quoting: quote system, use csv.QUOTE_*** (default csv.QUOTE_MINIMAL) 
+5739          :param represent: use the fields .represent value (default False) 
+5740          :param colnames: list of column names to use (default self.colnames) 
+5741                           This will only work when exporting rows objects!!!! 
+5742                           DO NOT use this with db.export_to_csv() 
+5743          """ 
+5744          delimiter = kwargs.get('delimiter', ',') 
+5745          quotechar = kwargs.get('quotechar', '"') 
+5746          quoting = kwargs.get('quoting', csv.QUOTE_MINIMAL) 
+5747          represent = kwargs.get('represent', False) 
+5748          writer = csv.writer(ofile, delimiter=delimiter, 
+5749                              quotechar=quotechar, quoting=quoting) 
+5750          colnames = kwargs.get('colnames', self.colnames) 
+5751          # a proper csv starting with the column names 
+5752          writer.writerow(colnames) 
+5753   
+5754          def none_exception(value): 
+5755              """ 
+5756              returns a cleaned up value that can be used for csv export: 
+5757              - unicode text is encoded as such 
+5758              - None values are replaced with the given representation (default <NULL>) 
+5759              """ 
+5760              if value is None: 
+5761                  return null 
+5762              elif isinstance(value, unicode): 
+5763                  return value.encode('utf8') 
+5764              elif isinstance(value,Reference): 
+5765                  return int(value) 
+5766              elif hasattr(value, 'isoformat'): 
+5767                  return value.isoformat()[:19].replace('T', ' ') 
+5768              elif isinstance(value, (list,tuple)): # for type='list:..' 
+5769                  return bar_encode(value) 
+5770              return value 
+
    5771   
+5772          for record in self: 
+5773              row = [] 
+5774              for col in colnames: 
+5775                  if not table_field.match(col): 
+5776                      row.append(record._extra[col]) 
+5777                  else: 
+5778                      (t, f) = col.split('.') 
+5779                      field = self.db[t][f] 
+5780                      if isinstance(record.get(t, None), (Row,dict)): 
+5781                          value = record[t][f] 
+5782                      else: 
+5783                          value = record[f] 
+5784                      if field.type=='blob' and value!=None: 
+5785                          value = base64.b64encode(value) 
+5786                      elif represent and field.represent: 
+5787                          value = field.represent(value) 
+5788                      row.append(none_exception(value)) 
+5789              writer.writerow(row) 
+
    5790   
+
    5791 -    def xml(self): 
+
    5792          """ 
+5793          serializes the table using sqlhtml.SQLTABLE (if present) 
+5794          """ 
+5795   
+5796          import sqlhtml 
+5797          return sqlhtml.SQLTABLE(self).xml() 
+
    5798   
+
    5799 -    def json(self, mode='object', default=None): 
+
    5800          """ 
+5801          serializes the table to a JSON list of objects 
+5802          """ 
+5803          mode = mode.lower() 
+5804          if not mode in ['object', 'array']: 
+5805              raise SyntaxError, 'Invalid JSON serialization mode: %s' % mode 
+5806   
+5807          def inner_loop(record, col): 
+5808              (t, f) = col.split('.') 
+5809              res = None 
+5810              if not table_field.match(col): 
+5811                  res = record._extra[col] 
+5812              else: 
+5813                  if isinstance(record.get(t, None), Row): 
+5814                      res = record[t][f] 
+5815                  else: 
+5816                      res = record[f] 
+5817              if mode == 'object': 
+5818                  return (f, res) 
+5819              else: 
+5820                  return res 
+
    5821   
+5822          if mode == 'object': 
+5823              items = [dict([inner_loop(record, col) for col in 
+5824                       self.colnames]) for record in self] 
+5825          else: 
+5826              items = [[inner_loop(record, col) for col in self.colnames] 
+5827                       for record in self] 
+5828          if have_serializers: 
+5829              return serializers.json(items,default=default or serializers.custom_json) 
+5830          else: 
+5831              import simplejson 
+5832              return simplejson.dumps(items) 
+5833   
+
    5834 -def Rows_unpickler(data): 
+
    5835      return cPickle.loads(data) 
+
    5836   
+
    5837 -def Rows_pickler(data): 
+
    5838      return Rows_unpickler, \ 
+5839          (cPickle.dumps(data.as_list(storage_to_dict=True, 
+5840                                      datetime_to_str=False)),) 
+
    5841   
+5842  copy_reg.pickle(Rows, Rows_pickler, Rows_unpickler) 
+5843   
+5844   
+5845  ################################################################################ 
+5846  # dummy function used to define some doctests 
+5847  ################################################################################ 
+5848   
+
    5849 -def test_all(): 
+
    5850      """ 
+5851   
+5852      >>> if len(sys.argv)<2: db = DAL(\"sqlite://test.db\") 
+5853      >>> if len(sys.argv)>1: db = DAL(sys.argv[1]) 
+5854      >>> tmp = db.define_table('users',\ 
+5855                Field('stringf', 'string', length=32, required=True),\ 
+5856                Field('booleanf', 'boolean', default=False),\ 
+5857                Field('passwordf', 'password', notnull=True),\ 
+5858                Field('uploadf', 'upload'),\ 
+5859                Field('blobf', 'blob'),\ 
+5860                Field('integerf', 'integer', unique=True),\ 
+5861                Field('doublef', 'double', unique=True,notnull=True),\ 
+5862                Field('datef', 'date', default=datetime.date.today()),\ 
+5863                Field('timef', 'time'),\ 
+5864                Field('datetimef', 'datetime'),\ 
+5865                migrate='test_user.table') 
+5866   
+5867     Insert a field 
+5868   
+5869      >>> db.users.insert(stringf='a', booleanf=True, passwordf='p', blobf='0A',\ 
+5870                         uploadf=None, integerf=5, doublef=3.14,\ 
+5871                         datef=datetime.date(2001, 1, 1),\ 
+5872                         timef=datetime.time(12, 30, 15),\ 
+5873                         datetimef=datetime.datetime(2002, 2, 2, 12, 30, 15)) 
+5874      1 
+5875   
+5876      Drop the table 
+5877   
+5878      >>> db.users.drop() 
+5879   
+5880      Examples of insert, select, update, delete 
+5881   
+5882      >>> tmp = db.define_table('person',\ 
+5883                Field('name'),\ 
+5884                Field('birth','date'),\ 
+5885                migrate='test_person.table') 
+5886      >>> person_id = db.person.insert(name=\"Marco\",birth='2005-06-22') 
+5887      >>> person_id = db.person.insert(name=\"Massimo\",birth='1971-12-21') 
+5888   
+5889      commented len(db().select(db.person.ALL)) 
+5890      commented 2 
+5891   
+5892      >>> me = db(db.person.id==person_id).select()[0] # test select 
+5893      >>> me.name 
+5894      'Massimo' 
+5895      >>> db(db.person.name=='Massimo').update(name='massimo') # test update 
+5896      1 
+5897      >>> db(db.person.name=='Marco').select().first().delete_record() # test delete 
+5898      1 
+5899   
+5900      Update a single record 
+5901   
+5902      >>> me.update_record(name=\"Max\") 
+5903      >>> me.name 
+5904      'Max' 
+5905   
+5906      Examples of complex search conditions 
+5907   
+5908      >>> len(db((db.person.name=='Max')&(db.person.birth<'2003-01-01')).select()) 
+5909      1 
+5910      >>> len(db((db.person.name=='Max')&(db.person.birth<datetime.date(2003,01,01))).select()) 
+5911      1 
+5912      >>> len(db((db.person.name=='Max')|(db.person.birth<'2003-01-01')).select()) 
+5913      1 
+5914      >>> me = db(db.person.id==person_id).select(db.person.name)[0] 
+5915      >>> me.name 
+5916      'Max' 
+5917   
+5918      Examples of search conditions using extract from date/datetime/time 
+5919   
+5920      >>> len(db(db.person.birth.month()==12).select()) 
+5921      1 
+5922      >>> len(db(db.person.birth.year()>1900).select()) 
+5923      1 
+5924   
+5925      Example of usage of NULL 
+5926   
+5927      >>> len(db(db.person.birth==None).select()) ### test NULL 
+5928      0 
+5929      >>> len(db(db.person.birth!=None).select()) ### test NULL 
+5930      1 
+5931   
+5932      Examples of search conditions using lower, upper, and like 
+5933   
+5934      >>> len(db(db.person.name.upper()=='MAX').select()) 
+5935      1 
+5936      >>> len(db(db.person.name.like('%ax')).select()) 
+5937      1 
+5938      >>> len(db(db.person.name.upper().like('%AX')).select()) 
+5939      1 
+5940      >>> len(db(~db.person.name.upper().like('%AX')).select()) 
+5941      0 
+5942   
+5943      orderby, groupby and limitby 
+5944   
+5945      >>> people = db().select(db.person.name, orderby=db.person.name) 
+5946      >>> order = db.person.name|~db.person.birth 
+5947      >>> people = db().select(db.person.name, orderby=order) 
+5948   
+5949      >>> people = db().select(db.person.name, orderby=db.person.name, groupby=db.person.name) 
+5950   
+5951      >>> people = db().select(db.person.name, orderby=order, limitby=(0,100)) 
+5952   
+5953      Example of one 2 many relation 
+5954   
+5955      >>> tmp = db.define_table('dog',\ 
+5956                 Field('name'),\ 
+5957                 Field('birth','date'),\ 
+5958                 Field('owner',db.person),\ 
+5959                 migrate='test_dog.table') 
+5960      >>> db.dog.insert(name='Snoopy', birth=None, owner=person_id) 
+5961      1 
+5962   
+5963      A simple JOIN 
+5964   
+5965      >>> len(db(db.dog.owner==db.person.id).select()) 
+5966      1 
+5967   
+5968      >>> len(db().select(db.person.ALL, db.dog.name,left=db.dog.on(db.dog.owner==db.person.id))) 
+5969      1 
+5970   
+5971      Drop tables 
+5972   
+5973      >>> db.dog.drop() 
+5974      >>> db.person.drop() 
+5975   
+5976      Example of many 2 many relation and Set 
+5977   
+5978      >>> tmp = db.define_table('author', Field('name'),\ 
+5979                              migrate='test_author.table') 
+5980      >>> tmp = db.define_table('paper', Field('title'),\ 
+5981                              migrate='test_paper.table') 
+5982      >>> tmp = db.define_table('authorship',\ 
+5983              Field('author_id', db.author),\ 
+5984              Field('paper_id', db.paper),\ 
+5985              migrate='test_authorship.table') 
+5986      >>> aid = db.author.insert(name='Massimo') 
+5987      >>> pid = db.paper.insert(title='QCD') 
+5988      >>> tmp = db.authorship.insert(author_id=aid, paper_id=pid) 
+5989   
+5990      Define a Set 
+5991   
+5992      >>> authored_papers = db((db.author.id==db.authorship.author_id)&(db.paper.id==db.authorship.paper_id)) 
+5993      >>> rows = authored_papers.select(db.author.name, db.paper.title) 
+5994      >>> for row in rows: print row.author.name, row.paper.title 
+5995      Massimo QCD 
+5996   
+5997      Example of search condition using  belongs 
+5998   
+5999      >>> set = (1, 2, 3) 
+6000      >>> rows = db(db.paper.id.belongs(set)).select(db.paper.ALL) 
+6001      >>> print rows[0].title 
+6002      QCD 
+6003   
+6004      Example of search condition using nested select 
+6005   
+6006      >>> nested_select = db()._select(db.authorship.paper_id) 
+6007      >>> rows = db(db.paper.id.belongs(nested_select)).select(db.paper.ALL) 
+6008      >>> print rows[0].title 
+6009      QCD 
+6010   
+6011      Example of expressions 
+6012   
+6013      >>> mynumber = db.define_table('mynumber', Field('x', 'integer')) 
+6014      >>> db(mynumber.id>0).delete() 
+6015      0 
+6016      >>> for i in range(10): tmp = mynumber.insert(x=i) 
+6017      >>> db(mynumber.id>0).select(mynumber.x.sum())[0](mynumber.x.sum()) 
+6018      45 
+6019   
+6020      >>> db(mynumber.x+2==5).select(mynumber.x + 2)[0](mynumber.x + 2) 
+6021      5 
+6022   
+6023      Output in csv 
+6024   
+6025      >>> print str(authored_papers.select(db.author.name, db.paper.title)).strip() 
+6026      author.name,paper.title\r 
+6027      Massimo,QCD 
+6028   
+6029      Delete all leftover tables 
+6030   
+6031      >>> DAL.distributed_transaction_commit(db) 
+6032   
+6033      >>> db.mynumber.drop() 
+6034      >>> db.authorship.drop() 
+6035      >>> db.author.drop() 
+6036      >>> db.paper.drop() 
+6037      """ 
+
    6038  ################################################################################ 
+6039  # deprecated since the new DAL; here only for backward compatibility 
+6040  ################################################################################ 
+6041   
+6042  SQLField = Field 
+6043  SQLTable = Table 
+6044  SQLXorable = Expression 
+6045  SQLQuery = Query 
+6046  SQLSet = Set 
+6047  SQLRows = Rows 
+6048  SQLStorage = Row 
+6049  SQLDB = DAL 
+6050  GQLDB = DAL 
+6051  DAL.Field = Field  # was necessary in gluon/globals.py session.connect 
+6052  DAL.Table = Table  # was necessary in gluon/globals.py session.connect 
+6053   
+6054  ################################################################################ 
+6055  # run tests 
+6056  ################################################################################ 
+6057   
+6058  if __name__ == '__main__': 
+6059      import doctest 
+6060      doctest.testmod() 
+6061   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:07 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.BaseAdapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.BaseAdapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.BaseAdapter-class.html
@@ -0,0 +1,1911 @@
+
+
+
+
+  web2py.gluon.dal.BaseAdapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class BaseAdapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class BaseAdapter
    source code

    
+
    +    object --+    
+             |    
+ConnectionPool --+
+                 |
+                BaseAdapter
+
    
+
+
    Known Subclasses:
    
+
    
+    NoSQLAdapter,
+    MySQLAdapter,
+    DB2Adapter,
+    FireBirdAdapter,
+    InformixAdapter,
+    IngresAdapter,
+    PostgreSQLAdapter,
+    SQLiteAdapter,
+    MSSQLAdapter,
+    OracleAdapter,
+    SAPDBAdapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    integrity_error(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    file_exists(self,
+        filename)
    
+      to be used ONLY for files that on GAE may not be on filesystem    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    file_open(self,
+        filename,
+        mode='rb',
+        lock=True)
    
+      to be used ONLY for files that on GAE may not be on filesystem    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    file_close(self,
+        fileobj,
+        unlock=True)
    
+      to be used ONLY for files that on GAE may not be on filesystem    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    file_delete(self,
+        filename)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd635f0>,
+        driver_args={},
+        adapter_args={})
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    sequence_name(self,
+        tablename)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    trigger_name(self,
+        tablename)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    create_table(self,
+        table,
+        migrate=True,
+        fake_migrate=True,
+        polymodel=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    migrate_table(self,
+        table,
+        sql_fields,
+        sql_fields_old,
+        sql_fields_aux,
+        logfile,
+        fake_migrate=True)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    LOWER(self,
+        first)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    UPPER(self,
+        first)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    EXTRACT(self,
+        first,
+        what)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    AGGREGATE(self,
+        first,
+        what)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    JOIN(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    LEFT_JOIN(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    RANDOM(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    NOT_NULL(self,
+        default,
+        field_type)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    COALESCE_ZERO(self,
+        first)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    ALLOW_NULL(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    SUBSTRING(self,
+        field,
+        parameters)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    PRIMARY_KEY(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _drop(self,
+        table,
+        mode)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    drop(self,
+        table,
+        mode='')
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _insert(self,
+        table,
+        fields)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    insert(self,
+        table,
+        fields)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    bulk_insert(self,
+        table,
+        items)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    NOT(self,
+        first)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    AND(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    OR(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    BELONGS(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    LIKE(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    STARTSWITH(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    ENDSWITH(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    CONTAINS(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    EQ(self,
+        first,
+        second=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    NE(self,
+        first,
+        second=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    LT(self,
+        first,
+        second=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    LE(self,
+        first,
+        second=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    GT(self,
+        first,
+        second=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    GE(self,
+        first,
+        second=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    ADD(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    SUB(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    MUL(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    DIV(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    MOD(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    AS(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    ON(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    INVERT(self,
+        first)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    COMMA(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    expand(self,
+        expression,
+        field_type=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    alias(self,
+        table,
+        alias)
    
+      given a table object, makes a new table object with alias 
+      name.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _truncate(self,
+        table,
+        mode='')
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    truncate(self,
+        table,
+        mode=' ')
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _update(self,
+        tablename,
+        query,
+        fields)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    update(self,
+        tablename,
+        query,
+        fields)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _delete(self,
+        tablename,
+        query)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    delete(self,
+        tablename,
+        query)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    get_table(self,
+        query)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _select(self,
+        query,
+        fields,
+        attributes)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    select_limitby(self,
+        sql_s,
+        sql_f,
+        sql_t,
+        sql_w,
+        sql_o,
+        limitby)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    select(self,
+        query,
+        fields,
+        attributes)
    
+      Always returns a Rows object, even if it may be empty    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _count(self,
+        query,
+        distinct=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    count(self,
+        query,
+        distinct=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    tables(self,
+        query)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    commit(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    rollback(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    close(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    distributed_transaction_begin(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    prepare(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    commit_prepared(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    rollback_prepared(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    concat_add(self,
+        table)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    constraint_name(self,
+        table,
+        fieldname)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    create_sequence_and_triggers(self,
+        query,
+        table,
+        **args)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    log_execute(self,
+        *a,
+        **b)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    execute(self,
+        *a,
+        **b)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    represent(self,
+        obj,
+        fieldtype)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    represent_exceptions(self,
+        obj,
+        fieldtype)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    lastrowid(self,
+        table)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    integrity_error_class(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    rowslice(self,
+        rows,
+        minimum=0,
+        maximum=1)
    
+      by default this function does nothing, overload when db does not 
+      do slicing    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    parse(self,
+        rows,
+        colnames,
+        blob_decode=True)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    filter_tenant(self,
+        query,
+        tablenames)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        driver = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        maxcharlength = 32768
+    
    
+       
+    
+        commit_on_alter_table = True
+    
    
+       
+    
+        support_distributed_transaction = True
+    
    
+       
+    
+        uploads_in_blob = True
+    
    
+       
+    
+        types = {'blob': 'BLOB', 'boolean': 'CHAR(1)', 'date': 'DATE',...
+    
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd635f0>,
+        driver_args={},
+        adapter_args={})
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    types
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'blob': 'BLOB',
+ 'boolean': 'CHAR(1)',
+ 'date': 'DATE',
+ 'datetime': 'TIMESTAMP',
+ 'decimal': 'DOUBLE',
+ 'double': 'DOUBLE',
+ 'id': 'INTEGER PRIMARY KEY AUTOINCREMENT',
+ 'integer': 'INTEGER',
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.ConnectionPool-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.ConnectionPool-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.ConnectionPool-class.html
@@ -0,0 +1,335 @@
+
+
+
+
+  web2py.gluon.dal.ConnectionPool
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class ConnectionPool
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class ConnectionPool
    source code

    
+
    +object --+
+         |
+        ConnectionPool
+
    
+
+
    Known Subclasses:
    
+
    
+    BaseAdapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    find_or_make_work_folder(self)
    
+      this actually does not make the folder.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    pool_connection(self,
+        f)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    set_folder(folder)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    close_all_instances(action)
    
+      to close cleanly databases in a multithreaded environment    		
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        pools = {}
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    find_or_make_work_folder(self)
+  
    
+      		source code 
+    
    
+  
+  this actually does not make the folder. it has to be there
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.CouchDBAdapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.CouchDBAdapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.CouchDBAdapter-class.html
@@ -0,0 +1,1201 @@
+
+
+
+
+  web2py.gluon.dal.CouchDBAdapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class CouchDBAdapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class CouchDBAdapter
    source code

    
+
    +    object --+            
+             |            
+ConnectionPool --+        
+                 |        
+       BaseAdapter --+    
+                     |    
+          NoSQLAdapter --+
+                         |
+                        CouchDBAdapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    file_exists(self,
+        filename)
    
+      to be used ONLY for files that on GAE may not be on filesystem    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    file_open(self,
+        filename,
+        mode='rb',
+        lock=True)
    
+      to be used ONLY for files that on GAE may not be on filesystem    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    file_close(self,
+        fileobj,
+        unlock=True)
    
+      to be used ONLY for files that on GAE may not be on filesystem    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    expand(self,
+        expression,
+        field_type=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    AND(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    OR(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    EQ(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    NE(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    COMMA(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    represent(self,
+        obj,
+        fieldtype)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        uri='couchdb://127.0.0.1:5984',
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd73500>,
+        driver_args={},
+        adapter_args={})
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    create_table(self,
+        table,
+        migrate=True,
+        fake_migrate=True,
+        polymodel=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    insert(self,
+        table,
+        fields)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _select(self,
+        query,
+        fields,
+        attributes)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    select(self,
+        query,
+        fields,
+        attributes)
    
+      Always returns a Rows object, even if it may be empty    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    delete(self,
+        tablename,
+        query)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    update(self,
+        tablename,
+        query,
+        fields)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    count(self,
+        query,
+        distinct=1)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from NoSQLAdapter:
+      ADD,
+      AGGREGATE,
+      AS,
+      DIV,
+      ENDSWITH,
+      EXTRACT,
+      LEFT_JOIN,
+      LIKE,
+      LOWER,
+      MUL,
+      ON,
+      PRIMARY_KEY,
+      RANDOM,
+      STARTSWITH,
+      SUB,
+      SUBSTRING,
+      UPPER,
+      alias,
+      close,
+      commit,
+      commit_prepared,
+      concat_add,
+      constraint_name,
+      create_sequence_and_triggers,
+      distributed_transaction_begin,
+      drop,
+      execute,
+      integrity_error_class,
+      lastrowid,
+      log_execute,
+      migrate_table,
+      prepare,
+      represent_exceptions,
+      rollback,
+      rollback_prepared,
+      rowslice
+      
    
+    
        
    Inherited from NoSQLAdapter (private):
+      _count,
+      _delete,
+      _insert,
+      _update
+      
    
+    
    Inherited from BaseAdapter:
+      ALLOW_NULL,
+      BELONGS,
+      COALESCE_ZERO,
+      CONTAINS,
+      GE,
+      GT,
+      INVERT,
+      JOIN,
+      LE,
+      LT,
+      MOD,
+      NOT,
+      NOT_NULL,
+      bulk_insert,
+      file_delete,
+      filter_tenant,
+      get_table,
+      integrity_error,
+      parse,
+      select_limitby,
+      sequence_name,
+      tables,
+      trigger_name,
+      truncate
+      
    
+    
        
    Inherited from BaseAdapter (private):
+      _drop,
+      _truncate
+      
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from NoSQLAdapter:
+      to_unicode
+      
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        uploads_in_blob = True
+    
    
+       
+    
+        types = {'blob': <type 'str'>, 'boolean': <type 'bool'>, 'date...
+    
    
+    
    Inherited from BaseAdapter:
+      commit_on_alter_table,
+      driver,
+      maxcharlength,
+      support_distributed_transaction
+      
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    file_exists(self,
+        filename)
+  
    
+      		source code 
+    
    
+  
+  to be used ONLY for files that on GAE may not be on filesystem
+  
    
+    
    Overrides:
+      BaseAdapter.file_exists
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    file_open(self,
+        filename,
+        mode='rb',
+        lock=True)
+  
    
+      		source code 
+    
    
+  
+  to be used ONLY for files that on GAE may not be on filesystem
+  
    
+    
    Overrides:
+      BaseAdapter.file_open
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    file_close(self,
+        fileobj,
+        unlock=True)
+  
    
+      		source code 
+    
    
+  
+  to be used ONLY for files that on GAE may not be on filesystem
+  
    
+    
    Overrides:
+      BaseAdapter.file_close
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    expand(self,
+        expression,
+        field_type=1)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.expand
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    AND(self,
+        first,
+        second)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      NoSQLAdapter.AND
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    OR(self,
+        first,
+        second)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      NoSQLAdapter.OR
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    EQ(self,
+        first,
+        second)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.EQ
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    NE(self,
+        first,
+        second)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.NE
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    COMMA(self,
+        first,
+        second)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.COMMA
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    represent(self,
+        obj,
+        fieldtype)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      NoSQLAdapter.represent
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        uri='couchdb://127.0.0.1:5984',
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd73500>,
+        driver_args={},
+        adapter_args={})
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      BaseAdapter.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    create_table(self,
+        table,
+        migrate=True,
+        fake_migrate=True,
+        polymodel=1)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.create_table
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    insert(self,
+        table,
+        fields)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.insert
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _select(self,
+        query,
+        fields,
+        attributes)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      NoSQLAdapter._select
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    select(self,
+        query,
+        fields,
+        attributes)
+  
    
+      		source code 
+    
    
+  
+  Always returns a Rows object, even if it may be empty
+  
    
+    
    Overrides:
+      BaseAdapter.select
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    delete(self,
+        tablename,
+        query)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.delete
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    update(self,
+        tablename,
+        query,
+        fields)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.update
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    count(self,
+        query,
+        distinct=1)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.count
+    
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    types
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'blob': <type 'str'>,
+ 'boolean': <type 'bool'>,
+ 'date': <type 'datetime.date'>,
+ 'datetime': <type 'datetime.datetime'>,
+ 'double': <type 'float'>,
+ 'id': <type 'long'>,
+ 'integer': <type 'long'>,
+ 'list:integer': <type 'list'>,
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.CubridAdapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.CubridAdapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.CubridAdapter-class.html
@@ -0,0 +1,424 @@
+
+
+
+
+  web2py.gluon.dal.CubridAdapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class CubridAdapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class CubridAdapter
    source code

    
+
    +    object --+            
+             |            
+ConnectionPool --+        
+                 |        
+       BaseAdapter --+    
+                     |    
+          MySQLAdapter --+
+                         |
+                        CubridAdapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6e488>,
+        driver_args={},
+        adapter_args={})
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from MySQLAdapter:
+      RANDOM,
+      SUBSTRING,
+      commit_prepared,
+      concat_add,
+      distributed_transaction_begin,
+      lastrowid,
+      prepare,
+      rollback_prepared
+      
    
+    
        
    Inherited from MySQLAdapter (private):
+      _drop
+      
    
+    
    Inherited from BaseAdapter:
+      ADD,
+      AGGREGATE,
+      ALLOW_NULL,
+      AND,
+      AS,
+      BELONGS,
+      COALESCE_ZERO,
+      COMMA,
+      CONTAINS,
+      DIV,
+      ENDSWITH,
+      EQ,
+      EXTRACT,
+      GE,
+      GT,
+      INVERT,
+      JOIN,
+      LE,
+      LEFT_JOIN,
+      LIKE,
+      LOWER,
+      LT,
+      MOD,
+      MUL,
+      NE,
+      NOT,
+      NOT_NULL,
+      ON,
+      OR,
+      PRIMARY_KEY,
+      STARTSWITH,
+      SUB,
+      UPPER,
+      alias,
+      bulk_insert,
+      close,
+      commit,
+      constraint_name,
+      count,
+      create_sequence_and_triggers,
+      create_table,
+      delete,
+      drop,
+      execute,
+      expand,
+      file_close,
+      file_delete,
+      file_exists,
+      file_open,
+      filter_tenant,
+      get_table,
+      insert,
+      integrity_error,
+      integrity_error_class,
+      log_execute,
+      migrate_table,
+      parse,
+      represent,
+      represent_exceptions,
+      rollback,
+      rowslice,
+      select,
+      select_limitby,
+      sequence_name,
+      tables,
+      trigger_name,
+      truncate,
+      update
+      
    
+    
        
    Inherited from BaseAdapter (private):
+      _count,
+      _delete,
+      _insert,
+      _select,
+      _truncate,
+      _update
+      
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        driver = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+    
    Inherited from MySQLAdapter:
+      commit_on_alter_table,
+      maxcharlength,
+      support_distributed_transaction,
+      types
+      
    
+    
    Inherited from BaseAdapter:
+      uploads_in_blob
+      
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6e488>,
+        driver_args={},
+        adapter_args={})
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      MySQLAdapter.__init__
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.DAL-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.DAL-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.DAL-class.html
@@ -0,0 +1,1040 @@
+
+
+
+
+  web2py.gluon.dal.DAL
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class DAL
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class DAL
    source code

    
+
    +object --+    
+         |    
+      dict --+
+             |
+            DAL
+
    
+
+
    
+
    an instance of this class represents a database connection
    
+  Example:
+
    +  db = DAL('sqlite://test.db')
+  db.define_table('tablename', Field('fieldname1'),
+                               Field('fieldname2'))
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Nested Classes[hide private]
    
+  
    
+       
+    
+        Field
    
+      an instance of this class represents a database field
+    
    
+       
+    
+        Table
    
+      an instance of this class represents a database table
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        uri='sqlite://dummy.db',
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        check_reserved=1,
+        migrate=True,
+        fake_migrate=True,
+        migrate_enabled=True,
+        fake_migrate_all=True,
+        decode_credentials=True,
+        driver_args=1,
+        adapter_args={},
+        attempts=5,
+        auto_import=True)
    
+      Creates a new Database Abstraction Layer instance.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    import_table_definitions(self,
+        path,
+        migrate=True,
+        fake_migrate=True)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    check_reserved_keyword(self,
+        name)
    
+      Validates ``name`` against SQL keywords Uses self.check_reserve 
+      which is a list of operators to use.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __contains__(self,
+        tablename)
    
+      Returns:
+True if D has a key k, else False    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    parse_as_rest(self,
+        patterns,
+        args,
+        vars,
+        query=1,
+        nested_select=True)
    
+      EXAMPLE:...    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    define_table(self,
+        tablename,
+        *fields,
+        **args)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __iter__(self)
    
+      iter(x)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getitem__(self,
+        key)
    
+      x[y]    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __setitem__(self,
+        key,
+        value)
    
+      x[i]=y    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getattr__(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __setattr__(self,
+        key,
+        value)
    
+      x.__setattr__('name', value) <==> x.name = value    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __repr__(self)
    
+      repr(x)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        query=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    commit(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    rollback(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    executesql(self,
+        query,
+        placeholders=1,
+        as_dict=True)
    
+      placeholders is optional and will always be None when using DAL if
+      using raw SQL with placeholders, placeholders may be a sequence of 
+      values to be substituted in or, *if supported by the DB driver*, a 
+      dictionary with keys matching named placeholders in your SQL.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _update_referenced_by(self,
+        other)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    export_to_csv_file(self,
+        ofile,
+        *args,
+        **kwargs)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    import_from_csv_file(self,
+        ifile,
+        id_map={},
+        null='<NULL>',
+        unique='uuid',
+        *args,
+        **kwargs)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from dict:
+      __cmp__,
+      __delitem__,
+      __eq__,
+      __ge__,
+      __getattribute__,
+      __gt__,
+      __hash__,
+      __le__,
+      __len__,
+      __lt__,
+      __ne__,
+      __new__,
+      clear,
+      copy,
+      fromkeys,
+      get,
+      has_key,
+      items,
+      iteritems,
+      iterkeys,
+      itervalues,
+      keys,
+      pop,
+      popitem,
+      setdefault,
+      update,
+      values
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __reduce__,
+      __reduce_ex__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    set_folder(folder)
    
+      # ## this allows gluon to set a folder for this thread # ## 
+      <<<<<<<<< Should go away as new DAL 
+      replaces old sql.py    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    distributed_transaction_begin(*instances)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    distributed_transaction_commit(*instances)
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        uri='sqlite://dummy.db',
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        check_reserved=1,
+        migrate=True,
+        fake_migrate=True,
+        migrate_enabled=True,
+        fake_migrate_all=True,
+        decode_credentials=True,
+        driver_args=1,
+        adapter_args={},
+        attempts=5,
+        auto_import=True)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Creates a new Database Abstraction Layer instance.
+
+Keyword arguments:
+
+:uri: string that contains information for connecting to a database.
+       (default: 'sqlite://dummy.db')
+:pool_size: How many open connections to make to the database object.
+:folder: <please update me>
+:db_codec: string encoding of the database (default: 'UTF-8')
+:check_reserved: list of adapters to check tablenames and column names
+                 against sql reserved keywords. (Default None)
+
+* 'common' List of sql keywords that are common to all database types
+        such as "SELECT, INSERT". (recommended)
+* 'all' Checks against all known SQL keywords. (not recommended)
+        <adaptername> Checks against the specific adapters list of keywords
+        (recommended)
+* '<adaptername>_nonreserved' Checks against the specific adapters
+        list of nonreserved keywords. (if available)
+:migrate (defaults to True) sets default migrate behavior for all tables
+:fake_migrate (defaults to False) sets default fake_migrate behavior for all tables
+:migrate_enabled (defaults to True). If set to False disables ALL migrations
+:fake_migrate_all (defaults to False). If sets to True fake migrates ALL tables
+:attempts (defaults to 5). Number of times to attempt connecting
+
+
    
+  
    
+    
    Returns:
    
+        
    +new empty dictionary
+
+
    
+    
    Overrides:
+      dict.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    check_reserved_keyword(self,
+        name)
+  
    
+      		source code 
+    
    
+  
+  Validates ``name`` against SQL keywords Uses self.check_reserve which 
+  is a list of operators to use. self.check_reserved ['common', 'postgres',
+  'mysql'] self.check_reserved ['all']
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __contains__(self,
+        tablename)
+    
    (In operator)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Returns:
    
+        
    +True if D has a key k, else False
+
+
    
+    
    Overrides:
+      dict.__contains__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    parse_as_rest(self,
+        patterns,
+        args,
+        vars,
+        query=1,
+        nested_select=True)
+  
    
+      		source code 
+    
    
+  
+  
    +
+        EXAMPLE:
+
+db.define_table('person',Field('name'),Field('info'))
+db.define_table('pet',Field('person',db.person),Field('name'),Field('info'))
+
+@request.restful()
+def index():
+    def GET(*kargs,**kvars):
+        patterns = [
+            "/persons[person]",
+            "/{person.name.startswith}",
+            "/{person.name}/:field",
+            "/{person.name}/pets[pet.person]",
+            "/{person.name}/pet[pet.person]/{pet.name}",
+            "/{person.name}/pet[pet.person]/{pet.name}/:field"
+            ]
+        parser = db.parse_as_rest(patterns,kargs,kvars)
+        if parser.status == 200:
+            return dict(content=parser.response)
+        else:
+            raise HTTP(parser.status,parser.error)
+    def POST(table_name,**kvars):
+        if table_name == 'person':
+            return db.person.validate_and_insert(**kvars)
+        elif table_name == 'pet':
+            return db.pet.validate_and_insert(**kvars)
+        else:
+            raise HTTP(400)
+    return locals()
+        
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __iter__(self)
+  
    
+      		source code 
+    
    
+  
+  iter(x)
+  
    
+    
    Overrides:
+      dict.__iter__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __getitem__(self,
+        key)
+    
    (Indexing operator)
+  
    
+      		source code 
+    
    
+  
+  x[y]
+  
    
+    
    Overrides:
+      dict.__getitem__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __setitem__(self,
+        key,
+        value)
+    
    (Index assignment operator)
+  
    
+      		source code 
+    
    
+  
+  x[i]=y
+  
    
+    
    Overrides:
+      dict.__setitem__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __setattr__(self,
+        key,
+        value)
+  
    
+      		source code 
+    
    
+  
+  x.__setattr__('name', value) <==> x.name = value
+  
    
+    
    Overrides:
+      object.__setattr__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __repr__(self)
+    
    (Representation operator)
+  
    
+      		source code 
+    
    
+  
+  repr(x)
+  
    
+    
    Overrides:
+      dict.__repr__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    executesql(self,
+        query,
+        placeholders=1,
+        as_dict=True)
+  
    
+      		source code 
+    
    
+  
+  
    placeholders is optional and will always be None when using DAL if 
+  using raw SQL with placeholders, placeholders may be a sequence of values
+  to be substituted in or, *if supported by the DB driver*, a dictionary 
+  with keys matching named placeholders in your SQL.
    
+  
    Added 2009-12-05 "as_dict" optional argument. Will always be
+  None when using DAL. If using raw SQL can be set to True and the results 
+  cursor returned by the DB driver will be converted to a sequence of 
+  dictionaries keyed with the db field names. Tested with SQLite but should
+  work with any database since the cursor.description used to get field 
+  names is part of the Python dbi 2.0 specs. Results returned with as_dict 
+  = True are the same as those returned when applying .to_list() to a DAL 
+  query.
    
+  
    [{field1: value1, field2: value2}, {field1: value1b, field2: 
+  value2b}]
    
+  --bmeredyk
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.DB2Adapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.DB2Adapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.DB2Adapter-class.html
@@ -0,0 +1,772 @@
+
+
+
+
+  web2py.gluon.dal.DB2Adapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class DB2Adapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class DB2Adapter
    source code

    
+
    +    object --+        
+             |        
+ConnectionPool --+    
+                 |    
+       BaseAdapter --+
+                     |
+                    DB2Adapter
+
    
+
+
    Known Subclasses:
    
+
    
+    TeradataAdapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    LEFT_JOIN(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    RANDOM(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    select_limitby(self,
+        sql_s,
+        sql_f,
+        sql_t,
+        sql_w,
+        sql_o,
+        limitby)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    represent_exceptions(self,
+        obj,
+        fieldtype)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6d938>,
+        driver_args={},
+        adapter_args={})
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    execute(self,
+        command)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    lastrowid(self,
+        table)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    rowslice(self,
+        rows,
+        minimum=0,
+        maximum=1)
    
+      by default this function does nothing, overload when db does not 
+      do slicing    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from BaseAdapter:
+      ADD,
+      AGGREGATE,
+      ALLOW_NULL,
+      AND,
+      AS,
+      BELONGS,
+      COALESCE_ZERO,
+      COMMA,
+      CONTAINS,
+      DIV,
+      ENDSWITH,
+      EQ,
+      EXTRACT,
+      GE,
+      GT,
+      INVERT,
+      JOIN,
+      LE,
+      LIKE,
+      LOWER,
+      LT,
+      MOD,
+      MUL,
+      NE,
+      NOT,
+      NOT_NULL,
+      ON,
+      OR,
+      PRIMARY_KEY,
+      STARTSWITH,
+      SUB,
+      SUBSTRING,
+      UPPER,
+      alias,
+      bulk_insert,
+      close,
+      commit,
+      commit_prepared,
+      concat_add,
+      constraint_name,
+      count,
+      create_sequence_and_triggers,
+      create_table,
+      delete,
+      distributed_transaction_begin,
+      drop,
+      expand,
+      file_close,
+      file_delete,
+      file_exists,
+      file_open,
+      filter_tenant,
+      get_table,
+      insert,
+      integrity_error,
+      integrity_error_class,
+      log_execute,
+      migrate_table,
+      parse,
+      prepare,
+      represent,
+      rollback,
+      rollback_prepared,
+      select,
+      sequence_name,
+      tables,
+      trigger_name,
+      truncate,
+      update
+      
    
+    
        
    Inherited from BaseAdapter (private):
+      _count,
+      _delete,
+      _drop,
+      _insert,
+      _select,
+      _truncate,
+      _update
+      
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        driver = globals().get('pyodbc', None)
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        types = {'blob': 'BLOB', 'boolean': 'CHAR(1)', 'date': 'DATE',...
+    
    
+    
    Inherited from BaseAdapter:
+      commit_on_alter_table,
+      maxcharlength,
+      support_distributed_transaction,
+      uploads_in_blob
+      
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    LEFT_JOIN(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.LEFT_JOIN
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    RANDOM(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.RANDOM
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    select_limitby(self,
+        sql_s,
+        sql_f,
+        sql_t,
+        sql_w,
+        sql_o,
+        limitby)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.select_limitby
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    represent_exceptions(self,
+        obj,
+        fieldtype)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.represent_exceptions
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6d938>,
+        driver_args={},
+        adapter_args={})
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      BaseAdapter.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    execute(self,
+        command)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.execute
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    lastrowid(self,
+        table)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.lastrowid
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    rowslice(self,
+        rows,
+        minimum=0,
+        maximum=1)
+  
    
+      		source code 
+    
    
+  
+  by default this function does nothing, overload when db does not do 
+  slicing
+  
    
+    
    Overrides:
+      BaseAdapter.rowslice
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    types
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'blob': 'BLOB',
+ 'boolean': 'CHAR(1)',
+ 'date': 'DATE',
+ 'datetime': 'TIMESTAMP',
+ 'decimal': 'NUMERIC(%(precision)s,%(scale)s)',
+ 'double': 'DOUBLE',
+ 'id': 'INTEGER GENERATED ALWAYS AS IDENTITY PRIMARY KEY NOT NULL',
+ 'integer': 'INT',
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.DatabaseStoredFile-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.DatabaseStoredFile-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.DatabaseStoredFile-class.html
@@ -0,0 +1,279 @@
+
+
+
+
+  web2py.gluon.dal.DatabaseStoredFile
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class DatabaseStoredFile
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class DatabaseStoredFile
    source code

    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        filename,
+        mode)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    read(self,
+        bytes)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    readline(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    write(self,
+        data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    close(self)
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    exists(db,
+        filename)
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        web2py_filesystem = True
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.Expression-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.Expression-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.Expression-class.html
@@ -0,0 +1,863 @@
+
+
+
+
+  web2py.gluon.dal.Expression
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class Expression
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Expression
    source code

    
+
    +object --+
+         |
+        Expression
+
    
+
+
    Known Subclasses:
    
+
    
+    Field
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        op,
+        first=1,
+        second=1,
+        type=1)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    sum(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    max(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    min(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    len(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    lower(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    upper(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    year(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    month(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    day(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    hour(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    minutes(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    coalesce_zero(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    seconds(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getslice__(self,
+        start,
+        stop)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getitem__(self,
+        i)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __str__(self)
    
+      str(x)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __or__(self,
+        other)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __invert__(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __add__(self,
+        other)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __sub__(self,
+        other)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __mul__(self,
+        other)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __div__(self,
+        other)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __mod__(self,
+        other)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __eq__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __ne__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __lt__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __le__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __gt__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __ge__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    like(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    belongs(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    startswith(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    endswith(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    contains(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    with_alias(self,
+        alias)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        op,
+        first=1,
+        second=1,
+        type=1)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __str__(self)
+    
    (Informal representation operator)
+  
    
+      		source code 
+    
    
+  
+  str(x)
+  
    
+    
    Overrides:
+      object.__str__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.Field-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.Field-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.Field-class.html
@@ -0,0 +1,499 @@
+
+
+
+
+  web2py.gluon.dal.Field
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class Field
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Field
    source code

    
+
    +object --+    
+         |    
+Expression --+
+             |
+            Field
+
    
+
+
    
+
    an instance of this class represents a database field
    
+  example:
+
    +   a = Field(name, 'string', length=32, default=None, required=False,
+       requires=IS_NOT_EMPTY(), ondelete='CASCADE',
+       notnull=False, unique=False,
+       uploadfield=True, widget=None, label=None, comment=None,
+       uploadfield=True, # True means store on disk,
+                         # 'a_field_name' means store in this field in db
+                         # False means file content will be discarded.
+       writable=True, readable=True, update=None, authorize=None,
+       autodelete=False, represent=None, uploadfolder=None,
+       uploadseparate=False # upload to separate directories by uuid_keys
+                            # first 2 character and tablename.fieldname
+                            # False - old behavior
+                            # True - put uploaded file in
+                            #   <uploaddir>/<tablename>.<fieldname>/uuid_key[:2]
+                            #        directory)
+
    
+  
    to be used as argument of DAL.define_table
    
+  
    allowed field types: string, boolean, integer, double, text, blob, 
+  date, time, datetime, upload, password
    
+  strings must have a length of Adapter.maxcharlength by default (512 or
+  255 for mysql) fields should have a default or they will be required in 
+  SQLFORMs the requires argument is used to validate the field input in 
+  SQLFORMs

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        fieldname,
+        type='string',
+        length=1,
+        default=<function <lambda> at 0xd1ec80>,
+        required=True,
+        requires=<function <lambda> at 0xd1ec80>,
+        ondelete='CASCADE',
+        notnull=True,
+        unique=True,
+        uploadfield=True,
+        widget=1,
+        label=1,
+        comment=1,
+        writable=True,
+        readable=True,
+        update=1,
+        authorize=1,
+        autodelete=True,
+        represent=1,
+        uploadfolder=1,
+        uploadseparate=True,
+        compute=1,
+        custom_store=1,
+        custom_retrieve=1,
+        custom_delete=1)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    store(self,
+        file,
+        filename=1,
+        path=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    retrieve(self,
+        name,
+        path=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    formatter(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    validate(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    count(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __nonzero__(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __str__(self)
    
+      str(x)    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Expression:
+      __add__,
+      __div__,
+      __eq__,
+      __ge__,
+      __getitem__,
+      __getslice__,
+      __gt__,
+      __invert__,
+      __le__,
+      __lt__,
+      __mod__,
+      __mul__,
+      __ne__,
+      __or__,
+      __sub__,
+      belongs,
+      coalesce_zero,
+      contains,
+      day,
+      endswith,
+      hour,
+      len,
+      like,
+      lower,
+      max,
+      min,
+      minutes,
+      month,
+      seconds,
+      startswith,
+      sum,
+      upper,
+      with_alias,
+      year
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        fieldname,
+        type='string',
+        length=1,
+        default=<function <lambda> at 0xd1ec80>,
+        required=True,
+        requires=<function <lambda> at 0xd1ec80>,
+        ondelete='CASCADE',
+        notnull=True,
+        unique=True,
+        uploadfield=True,
+        widget=1,
+        label=1,
+        comment=1,
+        writable=True,
+        readable=True,
+        update=1,
+        authorize=1,
+        autodelete=True,
+        represent=1,
+        uploadfolder=1,
+        uploadseparate=True,
+        compute=1,
+        custom_store=1,
+        custom_retrieve=1,
+        custom_delete=1)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      Expression.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __str__(self)
+    
    (Informal representation operator)
+  
    
+      		source code 
+    
    
+  
+  str(x)
+  
    
+    
    Overrides:
+      Expression.__str__
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.FireBirdAdapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.FireBirdAdapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.FireBirdAdapter-class.html
@@ -0,0 +1,905 @@
+
+
+
+
+  web2py.gluon.dal.FireBirdAdapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class FireBirdAdapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class FireBirdAdapter
    source code

    
+
    +    object --+        
+             |        
+ConnectionPool --+    
+                 |    
+       BaseAdapter --+
+                     |
+                    FireBirdAdapter
+
    
+
+
    Known Subclasses:
    
+
    
+    FireBirdEmbeddedAdapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    sequence_name(self,
+        tablename)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    trigger_name(self,
+        tablename)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    RANDOM(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    NOT_NULL(self,
+        default,
+        field_type)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    SUBSTRING(self,
+        field,
+        parameters)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _drop(self,
+        table,
+        mode)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    select_limitby(self,
+        sql_s,
+        sql_f,
+        sql_t,
+        sql_w,
+        sql_o,
+        limitby)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _truncate(self,
+        table,
+        mode='')
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6d050>,
+        driver_args={},
+        adapter_args={})
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    create_sequence_and_triggers(self,
+        query,
+        table,
+        **args)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    lastrowid(self,
+        table)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from BaseAdapter:
+      ADD,
+      AGGREGATE,
+      ALLOW_NULL,
+      AND,
+      AS,
+      BELONGS,
+      COALESCE_ZERO,
+      COMMA,
+      CONTAINS,
+      DIV,
+      ENDSWITH,
+      EQ,
+      EXTRACT,
+      GE,
+      GT,
+      INVERT,
+      JOIN,
+      LE,
+      LEFT_JOIN,
+      LIKE,
+      LOWER,
+      LT,
+      MOD,
+      MUL,
+      NE,
+      NOT,
+      ON,
+      OR,
+      PRIMARY_KEY,
+      STARTSWITH,
+      SUB,
+      UPPER,
+      alias,
+      bulk_insert,
+      close,
+      commit,
+      commit_prepared,
+      concat_add,
+      constraint_name,
+      count,
+      create_table,
+      delete,
+      distributed_transaction_begin,
+      drop,
+      execute,
+      expand,
+      file_close,
+      file_delete,
+      file_exists,
+      file_open,
+      filter_tenant,
+      get_table,
+      insert,
+      integrity_error,
+      integrity_error_class,
+      log_execute,
+      migrate_table,
+      parse,
+      prepare,
+      represent,
+      represent_exceptions,
+      rollback,
+      rollback_prepared,
+      rowslice,
+      select,
+      tables,
+      truncate,
+      update
+      
    
+    
        
    Inherited from BaseAdapter (private):
+      _count,
+      _delete,
+      _insert,
+      _select,
+      _update
+      
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        driver = globals().get('pyodbc', None)
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        commit_on_alter_table = True
+    
    
+       
+    
+        support_distributed_transaction = True
+    
    
+       
+    
+        types = {'blob': 'BLOB SUB_TYPE 0', 'boolean': 'CHAR(1)', 'dat...
+    
    
+    
    Inherited from BaseAdapter:
+      maxcharlength,
+      uploads_in_blob
+      
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    sequence_name(self,
+        tablename)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.sequence_name
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    trigger_name(self,
+        tablename)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.trigger_name
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    RANDOM(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.RANDOM
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    NOT_NULL(self,
+        default,
+        field_type)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.NOT_NULL
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    SUBSTRING(self,
+        field,
+        parameters)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.SUBSTRING
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _drop(self,
+        table,
+        mode)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter._drop
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    select_limitby(self,
+        sql_s,
+        sql_f,
+        sql_t,
+        sql_w,
+        sql_o,
+        limitby)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.select_limitby
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _truncate(self,
+        table,
+        mode='')
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter._truncate
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6d050>,
+        driver_args={},
+        adapter_args={})
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      BaseAdapter.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    create_sequence_and_triggers(self,
+        query,
+        table,
+        **args)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.create_sequence_and_triggers
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    lastrowid(self,
+        table)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.lastrowid
+    
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    types
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'blob': 'BLOB SUB_TYPE 0',
+ 'boolean': 'CHAR(1)',
+ 'date': 'DATE',
+ 'datetime': 'TIMESTAMP',
+ 'decimal': 'DECIMAL(%(precision)s,%(scale)s)',
+ 'double': 'DOUBLE PRECISION',
+ 'id': 'INTEGER PRIMARY KEY',
+ 'integer': 'INTEGER',
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.FireBirdEmbeddedAdapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.FireBirdEmbeddedAdapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.FireBirdEmbeddedAdapter-class.html
@@ -0,0 +1,420 @@
+
+
+
+
+  web2py.gluon.dal.FireBirdEmbeddedAdapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class FireBirdEmbeddedAdapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class FireBirdEmbeddedAdapter
    source code

    
+
    +    object --+            
+             |            
+ConnectionPool --+        
+                 |        
+       BaseAdapter --+    
+                     |    
+       FireBirdAdapter --+
+                         |
+                        FireBirdEmbeddedAdapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6d230>,
+        driver_args={},
+        adapter_args={})
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from FireBirdAdapter:
+      NOT_NULL,
+      RANDOM,
+      SUBSTRING,
+      create_sequence_and_triggers,
+      lastrowid,
+      select_limitby,
+      sequence_name,
+      trigger_name
+      
    
+    
        
    Inherited from FireBirdAdapter (private):
+      _drop,
+      _truncate
+      
    
+    
    Inherited from BaseAdapter:
+      ADD,
+      AGGREGATE,
+      ALLOW_NULL,
+      AND,
+      AS,
+      BELONGS,
+      COALESCE_ZERO,
+      COMMA,
+      CONTAINS,
+      DIV,
+      ENDSWITH,
+      EQ,
+      EXTRACT,
+      GE,
+      GT,
+      INVERT,
+      JOIN,
+      LE,
+      LEFT_JOIN,
+      LIKE,
+      LOWER,
+      LT,
+      MOD,
+      MUL,
+      NE,
+      NOT,
+      ON,
+      OR,
+      PRIMARY_KEY,
+      STARTSWITH,
+      SUB,
+      UPPER,
+      alias,
+      bulk_insert,
+      close,
+      commit,
+      commit_prepared,
+      concat_add,
+      constraint_name,
+      count,
+      create_table,
+      delete,
+      distributed_transaction_begin,
+      drop,
+      execute,
+      expand,
+      file_close,
+      file_delete,
+      file_exists,
+      file_open,
+      filter_tenant,
+      get_table,
+      insert,
+      integrity_error,
+      integrity_error_class,
+      log_execute,
+      migrate_table,
+      parse,
+      prepare,
+      represent,
+      represent_exceptions,
+      rollback,
+      rollback_prepared,
+      rowslice,
+      select,
+      tables,
+      truncate,
+      update
+      
    
+    
        
    Inherited from BaseAdapter (private):
+      _count,
+      _delete,
+      _insert,
+      _select,
+      _update
+      
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+    
    Inherited from FireBirdAdapter:
+      commit_on_alter_table,
+      driver,
+      support_distributed_transaction,
+      types
+      
    
+    
    Inherited from BaseAdapter:
+      maxcharlength,
+      uploads_in_blob
+      
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6d230>,
+        driver_args={},
+        adapter_args={})
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      FireBirdAdapter.__init__
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.GAEDecimalProperty-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.GAEDecimalProperty-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.GAEDecimalProperty-class.html
@@ -0,0 +1,238 @@
+
+
+
+
+  web2py.gluon.dal.GAEDecimalProperty
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class GAEDecimalProperty
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class GAEDecimalProperty
    source code

    
+
    +google.appengine.ext.db.Property --+
+                                   |
+                                  GAEDecimalProperty
+
    
+
+
    
+GAE decimal implementation

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        precision,
+        scale,
+        **kwargs)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    get_value_for_datastore(self,
+        model_instance)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    make_value_from_datastore(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    validate(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        data_type = decimal.Decimal
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.GAEF-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.GAEF-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.GAEF-class.html
@@ -0,0 +1,291 @@
+
+
+
+
+  web2py.gluon.dal.GAEF
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class GAEF
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class GAEF
    source code

    
+
    +object --+
+         |
+        GAEF
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        name,
+        op,
+        value,
+        apply)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __repr__(self)
    
+      repr(x)    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        name,
+        op,
+        value,
+        apply)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __repr__(self)
+    
    (Representation operator)
+  
    
+      		source code 
+    
    
+  
+  repr(x)
+  
    
+    
    Overrides:
+      object.__repr__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.GoogleDatastoreAdapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.GoogleDatastoreAdapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.GoogleDatastoreAdapter-class.html
@@ -0,0 +1,1453 @@
+
+
+
+
+  web2py.gluon.dal.GoogleDatastoreAdapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class GoogleDatastoreAdapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class GoogleDatastoreAdapter
    source code

    
+
    +    object --+            
+             |            
+ConnectionPool --+        
+                 |        
+       BaseAdapter --+    
+                     |    
+          NoSQLAdapter --+
+                         |
+                        GoogleDatastoreAdapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    file_exists(self,
+        filename)
    
+      to be used ONLY for files that on GAE may not be on filesystem    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    file_open(self,
+        filename,
+        mode='rb',
+        lock=True)
    
+      to be used ONLY for files that on GAE may not be on filesystem    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    file_close(self,
+        fileobj,
+        unlock=True)
    
+      to be used ONLY for files that on GAE may not be on filesystem    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd71398>,
+        driver_args={},
+        adapter_args={})
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    create_table(self,
+        table,
+        migrate=True,
+        fake_migrate=True,
+        polymodel=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    expand(self,
+        expression,
+        field_type=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    AND(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    EQ(self,
+        first,
+        second=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    NE(self,
+        first,
+        second=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    LT(self,
+        first,
+        second=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    LE(self,
+        first,
+        second=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    GT(self,
+        first,
+        second=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    GE(self,
+        first,
+        second=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    INVERT(self,
+        first)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    COMMA(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    BELONGS(self,
+        first,
+        second=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    CONTAINS(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    NOT(self,
+        first)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    truncate(self,
+        table,
+        mode)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    select_raw(self,
+        query,
+        fields=[],
+        attributes={})
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    select(self,
+        query,
+        fields,
+        attributes)
    
+      Always returns a Rows object, even if it may be empty    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    count(self,
+        query,
+        distinct=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    delete(self,
+        tablename,
+        query)
    
+      This function was changed on 2010-05-04 because according to 
+      http://code.google.com/p/googleappengine/issues/detail?id=3119 GAE no
+      longer support deleting more than 1000 records.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    update(self,
+        tablename,
+        query,
+        update_fields)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    insert(self,
+        table,
+        fields)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    bulk_insert(self,
+        table,
+        items)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from NoSQLAdapter:
+      ADD,
+      AGGREGATE,
+      AS,
+      DIV,
+      ENDSWITH,
+      EXTRACT,
+      LEFT_JOIN,
+      LIKE,
+      LOWER,
+      MUL,
+      ON,
+      OR,
+      PRIMARY_KEY,
+      RANDOM,
+      STARTSWITH,
+      SUB,
+      SUBSTRING,
+      UPPER,
+      alias,
+      close,
+      commit,
+      commit_prepared,
+      concat_add,
+      constraint_name,
+      create_sequence_and_triggers,
+      distributed_transaction_begin,
+      drop,
+      execute,
+      integrity_error_class,
+      lastrowid,
+      log_execute,
+      migrate_table,
+      prepare,
+      represent,
+      represent_exceptions,
+      rollback,
+      rollback_prepared,
+      rowslice
+      
    
+    
        
    Inherited from NoSQLAdapter (private):
+      _count,
+      _delete,
+      _insert,
+      _select,
+      _update
+      
    
+    
    Inherited from BaseAdapter:
+      ALLOW_NULL,
+      COALESCE_ZERO,
+      JOIN,
+      MOD,
+      NOT_NULL,
+      file_delete,
+      filter_tenant,
+      get_table,
+      integrity_error,
+      parse,
+      select_limitby,
+      sequence_name,
+      tables,
+      trigger_name
+      
    
+    
        
    Inherited from BaseAdapter (private):
+      _drop,
+      _truncate
+      
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from NoSQLAdapter:
+      to_unicode
+      
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        uploads_in_blob = True
+    
    
+       
+    
+        types = {}
+    
    
+    
    Inherited from BaseAdapter:
+      commit_on_alter_table,
+      driver,
+      maxcharlength,
+      support_distributed_transaction
+      
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    file_exists(self,
+        filename)
+  
    
+      		source code 
+    
    
+  
+  to be used ONLY for files that on GAE may not be on filesystem
+  
    
+    
    Overrides:
+      BaseAdapter.file_exists
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    file_open(self,
+        filename,
+        mode='rb',
+        lock=True)
+  
    
+      		source code 
+    
    
+  
+  to be used ONLY for files that on GAE may not be on filesystem
+  
    
+    
    Overrides:
+      BaseAdapter.file_open
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    file_close(self,
+        fileobj,
+        unlock=True)
+  
    
+      		source code 
+    
    
+  
+  to be used ONLY for files that on GAE may not be on filesystem
+  
    
+    
    Overrides:
+      BaseAdapter.file_close
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd71398>,
+        driver_args={},
+        adapter_args={})
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      BaseAdapter.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    create_table(self,
+        table,
+        migrate=True,
+        fake_migrate=True,
+        polymodel=1)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.create_table
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    expand(self,
+        expression,
+        field_type=1)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.expand
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    AND(self,
+        first,
+        second)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      NoSQLAdapter.AND
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    EQ(self,
+        first,
+        second=1)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.EQ
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    NE(self,
+        first,
+        second=1)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.NE
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    LT(self,
+        first,
+        second=1)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.LT
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    LE(self,
+        first,
+        second=1)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.LE
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    GT(self,
+        first,
+        second=1)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.GT
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    GE(self,
+        first,
+        second=1)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.GE
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    INVERT(self,
+        first)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.INVERT
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    COMMA(self,
+        first,
+        second)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.COMMA
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    BELONGS(self,
+        first,
+        second=1)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.BELONGS
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    CONTAINS(self,
+        first,
+        second)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.CONTAINS
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    NOT(self,
+        first)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.NOT
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    truncate(self,
+        table,
+        mode)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.truncate
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    select(self,
+        query,
+        fields,
+        attributes)
+  
    
+      		source code 
+    
    
+  
+  Always returns a Rows object, even if it may be empty
+  
    
+    
    Overrides:
+      BaseAdapter.select
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    count(self,
+        query,
+        distinct=1)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.count
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    delete(self,
+        tablename,
+        query)
+  
    
+      		source code 
+    
    
+  
+  This function was changed on 2010-05-04 because according to 
+  http://code.google.com/p/googleappengine/issues/detail?id=3119 GAE no 
+  longer support deleting more than 1000 records.
+  
    
+    
    Overrides:
+      BaseAdapter.delete
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    update(self,
+        tablename,
+        query,
+        update_fields)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.update
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    insert(self,
+        table,
+        fields)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.insert
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    bulk_insert(self,
+        table,
+        items)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.bulk_insert
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.GoogleSQLAdapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.GoogleSQLAdapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.GoogleSQLAdapter-class.html
@@ -0,0 +1,427 @@
+
+
+
+
+  web2py.gluon.dal.GoogleSQLAdapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class GoogleSQLAdapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class GoogleSQLAdapter
    source code

    
+
    + UseDatabaseStoredFile --+
+                         |
+    object --+           |
+             |           |
+ConnectionPool --+       |
+                 |       |
+       BaseAdapter --+   |
+                     |   |
+          MySQLAdapter --+
+                         |
+                        GoogleSQLAdapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        uri='google:sql://realm:domain/database',
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        check_reserved=1,
+        migrate=True,
+        fake_migrate=True,
+        credential_decoder=<function <lambda> at 0xd6ea28>,
+        driver_args={},
+        adapter_args={})
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from UseDatabaseStoredFile:
+      file_close,
+      file_delete,
+      file_exists,
+      file_open
+      
    
+    
    Inherited from MySQLAdapter:
+      RANDOM,
+      SUBSTRING,
+      commit_prepared,
+      concat_add,
+      distributed_transaction_begin,
+      lastrowid,
+      prepare,
+      rollback_prepared
+      
    
+    
        
    Inherited from MySQLAdapter (private):
+      _drop
+      
    
+    
    Inherited from BaseAdapter:
+      ADD,
+      AGGREGATE,
+      ALLOW_NULL,
+      AND,
+      AS,
+      BELONGS,
+      COALESCE_ZERO,
+      COMMA,
+      CONTAINS,
+      DIV,
+      ENDSWITH,
+      EQ,
+      EXTRACT,
+      GE,
+      GT,
+      INVERT,
+      JOIN,
+      LE,
+      LEFT_JOIN,
+      LIKE,
+      LOWER,
+      LT,
+      MOD,
+      MUL,
+      NE,
+      NOT,
+      NOT_NULL,
+      ON,
+      OR,
+      PRIMARY_KEY,
+      STARTSWITH,
+      SUB,
+      UPPER,
+      alias,
+      bulk_insert,
+      close,
+      commit,
+      constraint_name,
+      count,
+      create_sequence_and_triggers,
+      create_table,
+      delete,
+      drop,
+      execute,
+      expand,
+      filter_tenant,
+      get_table,
+      insert,
+      integrity_error,
+      integrity_error_class,
+      log_execute,
+      migrate_table,
+      parse,
+      represent,
+      represent_exceptions,
+      rollback,
+      rowslice,
+      select,
+      select_limitby,
+      sequence_name,
+      tables,
+      trigger_name,
+      truncate,
+      update
+      
    
+    
        
    Inherited from BaseAdapter (private):
+      _count,
+      _delete,
+      _insert,
+      _select,
+      _truncate,
+      _update
+      
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+    
    Inherited from MySQLAdapter:
+      commit_on_alter_table,
+      driver,
+      maxcharlength,
+      support_distributed_transaction,
+      types
+      
    
+    
    Inherited from BaseAdapter:
+      uploads_in_blob
+      
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        uri='google:sql://realm:domain/database',
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        check_reserved=1,
+        migrate=True,
+        fake_migrate=True,
+        credential_decoder=<function <lambda> at 0xd6ea28>,
+        driver_args={},
+        adapter_args={})
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      MySQLAdapter.__init__
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.InformixAdapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.InformixAdapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.InformixAdapter-class.html
@@ -0,0 +1,761 @@
+
+
+
+
+  web2py.gluon.dal.InformixAdapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class InformixAdapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class InformixAdapter
    source code

    
+
    +    object --+        
+             |        
+ConnectionPool --+    
+                 |    
+       BaseAdapter --+
+                     |
+                    InformixAdapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    RANDOM(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    NOT_NULL(self,
+        default,
+        field_type)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    select_limitby(self,
+        sql_s,
+        sql_f,
+        sql_t,
+        sql_w,
+        sql_o,
+        limitby)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    represent_exceptions(self,
+        obj,
+        fieldtype)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6d500>,
+        driver_args={},
+        adapter_args={})
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    execute(self,
+        command)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    lastrowid(self,
+        table)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    integrity_error_class(self)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from BaseAdapter:
+      ADD,
+      AGGREGATE,
+      ALLOW_NULL,
+      AND,
+      AS,
+      BELONGS,
+      COALESCE_ZERO,
+      COMMA,
+      CONTAINS,
+      DIV,
+      ENDSWITH,
+      EQ,
+      EXTRACT,
+      GE,
+      GT,
+      INVERT,
+      JOIN,
+      LE,
+      LEFT_JOIN,
+      LIKE,
+      LOWER,
+      LT,
+      MOD,
+      MUL,
+      NE,
+      NOT,
+      ON,
+      OR,
+      PRIMARY_KEY,
+      STARTSWITH,
+      SUB,
+      SUBSTRING,
+      UPPER,
+      alias,
+      bulk_insert,
+      close,
+      commit,
+      commit_prepared,
+      concat_add,
+      constraint_name,
+      count,
+      create_sequence_and_triggers,
+      create_table,
+      delete,
+      distributed_transaction_begin,
+      drop,
+      expand,
+      file_close,
+      file_delete,
+      file_exists,
+      file_open,
+      filter_tenant,
+      get_table,
+      insert,
+      integrity_error,
+      log_execute,
+      migrate_table,
+      parse,
+      prepare,
+      represent,
+      rollback,
+      rollback_prepared,
+      rowslice,
+      select,
+      sequence_name,
+      tables,
+      trigger_name,
+      truncate,
+      update
+      
    
+    
        
    Inherited from BaseAdapter (private):
+      _count,
+      _delete,
+      _drop,
+      _insert,
+      _select,
+      _truncate,
+      _update
+      
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        driver = globals().get('informixdb', None)
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        types = {'blob': 'BLOB SUB_TYPE 0', 'boolean': 'CHAR(1)', 'dat...
+    
    
+    
    Inherited from BaseAdapter:
+      commit_on_alter_table,
+      maxcharlength,
+      support_distributed_transaction,
+      uploads_in_blob
+      
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    RANDOM(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.RANDOM
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    NOT_NULL(self,
+        default,
+        field_type)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.NOT_NULL
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    select_limitby(self,
+        sql_s,
+        sql_f,
+        sql_t,
+        sql_w,
+        sql_o,
+        limitby)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.select_limitby
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    represent_exceptions(self,
+        obj,
+        fieldtype)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.represent_exceptions
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6d500>,
+        driver_args={},
+        adapter_args={})
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      BaseAdapter.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    execute(self,
+        command)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.execute
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    lastrowid(self,
+        table)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.lastrowid
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    integrity_error_class(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.integrity_error_class
+    
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    types
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'blob': 'BLOB SUB_TYPE 0',
+ 'boolean': 'CHAR(1)',
+ 'date': 'DATE',
+ 'datetime': 'DATETIME',
+ 'decimal': 'NUMERIC(%(precision)s,%(scale)s)',
+ 'double': 'FLOAT',
+ 'id': 'SERIAL',
+ 'integer': 'INTEGER',
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.IngresAdapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.IngresAdapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.IngresAdapter-class.html
@@ -0,0 +1,725 @@
+
+
+
+
+  web2py.gluon.dal.IngresAdapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class IngresAdapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IngresAdapter
    source code

    
+
    +    object --+        
+             |        
+ConnectionPool --+    
+                 |    
+       BaseAdapter --+
+                     |
+                    IngresAdapter
+
    
+
+
    Known Subclasses:
    
+
    
+    IngresUnicodeAdapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    LEFT_JOIN(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    RANDOM(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    select_limitby(self,
+        sql_s,
+        sql_f,
+        sql_t,
+        sql_w,
+        sql_o,
+        limitby)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6de60>,
+        driver_args={},
+        adapter_args={})
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    create_sequence_and_triggers(self,
+        query,
+        table,
+        **args)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    lastrowid(self,
+        table)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    integrity_error_class(self)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from BaseAdapter:
+      ADD,
+      AGGREGATE,
+      ALLOW_NULL,
+      AND,
+      AS,
+      BELONGS,
+      COALESCE_ZERO,
+      COMMA,
+      CONTAINS,
+      DIV,
+      ENDSWITH,
+      EQ,
+      EXTRACT,
+      GE,
+      GT,
+      INVERT,
+      JOIN,
+      LE,
+      LIKE,
+      LOWER,
+      LT,
+      MOD,
+      MUL,
+      NE,
+      NOT,
+      NOT_NULL,
+      ON,
+      OR,
+      PRIMARY_KEY,
+      STARTSWITH,
+      SUB,
+      SUBSTRING,
+      UPPER,
+      alias,
+      bulk_insert,
+      close,
+      commit,
+      commit_prepared,
+      concat_add,
+      constraint_name,
+      count,
+      create_table,
+      delete,
+      distributed_transaction_begin,
+      drop,
+      execute,
+      expand,
+      file_close,
+      file_delete,
+      file_exists,
+      file_open,
+      filter_tenant,
+      get_table,
+      insert,
+      integrity_error,
+      log_execute,
+      migrate_table,
+      parse,
+      prepare,
+      represent,
+      represent_exceptions,
+      rollback,
+      rollback_prepared,
+      rowslice,
+      select,
+      sequence_name,
+      tables,
+      trigger_name,
+      truncate,
+      update
+      
    
+    
        
    Inherited from BaseAdapter (private):
+      _count,
+      _delete,
+      _drop,
+      _insert,
+      _select,
+      _truncate,
+      _update
+      
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        driver = globals().get('ingresdbi', None)
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        types = {'blob': 'BLOB', 'boolean': 'CHAR(1)', 'date': 'ANSIDA...
+    
    
+    
    Inherited from BaseAdapter:
+      commit_on_alter_table,
+      maxcharlength,
+      support_distributed_transaction,
+      uploads_in_blob
+      
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    LEFT_JOIN(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.LEFT_JOIN
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    RANDOM(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.RANDOM
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    select_limitby(self,
+        sql_s,
+        sql_f,
+        sql_t,
+        sql_w,
+        sql_o,
+        limitby)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.select_limitby
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6de60>,
+        driver_args={},
+        adapter_args={})
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      BaseAdapter.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    create_sequence_and_triggers(self,
+        query,
+        table,
+        **args)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.create_sequence_and_triggers
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    lastrowid(self,
+        table)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.lastrowid
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    integrity_error_class(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.integrity_error_class
+    
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    types
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'blob': 'BLOB',
+ 'boolean': 'CHAR(1)',
+ 'date': 'ANSIDATE',
+ 'datetime': 'TIMESTAMP WITHOUT TIME ZONE',
+ 'decimal': 'NUMERIC(%(precision)s,%(scale)s)',
+ 'double': 'FLOAT8',
+ 'id': 'integer4 not null unique with default next value for ii***line\
+itemsequence',
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.IngresUnicodeAdapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.IngresUnicodeAdapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.IngresUnicodeAdapter-class.html
@@ -0,0 +1,401 @@
+
+
+
+
+  web2py.gluon.dal.IngresUnicodeAdapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class IngresUnicodeAdapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IngresUnicodeAdapter
    source code

    
+
    +    object --+            
+             |            
+ConnectionPool --+        
+                 |        
+       BaseAdapter --+    
+                     |    
+         IngresAdapter --+
+                         |
+                        IngresUnicodeAdapter
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from IngresAdapter:
+      LEFT_JOIN,
+      RANDOM,
+      __init__,
+      create_sequence_and_triggers,
+      integrity_error_class,
+      lastrowid,
+      select_limitby
+      
    
+    
    Inherited from BaseAdapter:
+      ADD,
+      AGGREGATE,
+      ALLOW_NULL,
+      AND,
+      AS,
+      BELONGS,
+      COALESCE_ZERO,
+      COMMA,
+      CONTAINS,
+      DIV,
+      ENDSWITH,
+      EQ,
+      EXTRACT,
+      GE,
+      GT,
+      INVERT,
+      JOIN,
+      LE,
+      LIKE,
+      LOWER,
+      LT,
+      MOD,
+      MUL,
+      NE,
+      NOT,
+      NOT_NULL,
+      ON,
+      OR,
+      PRIMARY_KEY,
+      STARTSWITH,
+      SUB,
+      SUBSTRING,
+      UPPER,
+      alias,
+      bulk_insert,
+      close,
+      commit,
+      commit_prepared,
+      concat_add,
+      constraint_name,
+      count,
+      create_table,
+      delete,
+      distributed_transaction_begin,
+      drop,
+      execute,
+      expand,
+      file_close,
+      file_delete,
+      file_exists,
+      file_open,
+      filter_tenant,
+      get_table,
+      insert,
+      integrity_error,
+      log_execute,
+      migrate_table,
+      parse,
+      prepare,
+      represent,
+      represent_exceptions,
+      rollback,
+      rollback_prepared,
+      rowslice,
+      select,
+      sequence_name,
+      tables,
+      trigger_name,
+      truncate,
+      update
+      
    
+    
        
    Inherited from BaseAdapter (private):
+      _count,
+      _delete,
+      _drop,
+      _insert,
+      _select,
+      _truncate,
+      _update
+      
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        types = {'blob': 'BLOB', 'boolean': 'CHAR(1)', 'date': 'ANSIDA...
+    
    
+    
    Inherited from IngresAdapter:
+      driver
+      
    
+    
    Inherited from BaseAdapter:
+      commit_on_alter_table,
+      maxcharlength,
+      support_distributed_transaction,
+      uploads_in_blob
+      
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    types
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'blob': 'BLOB',
+ 'boolean': 'CHAR(1)',
+ 'date': 'ANSIDATE',
+ 'datetime': 'TIMESTAMP WITHOUT TIME ZONE',
+ 'decimal': 'NUMERIC(%(precision)s,%(scale)s)',
+ 'double': 'FLOAT8',
+ 'id': 'integer4 not null unique with default next value for ii***line\
+itemsequence',
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.JDBCPostgreSQLAdapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.JDBCPostgreSQLAdapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.JDBCPostgreSQLAdapter-class.html
@@ -0,0 +1,415 @@
+
+
+
+
+  web2py.gluon.dal.JDBCPostgreSQLAdapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class JDBCPostgreSQLAdapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class JDBCPostgreSQLAdapter
    source code

    
+
    +    object --+            
+             |            
+ConnectionPool --+        
+                 |        
+       BaseAdapter --+    
+                     |    
+     PostgreSQLAdapter --+
+                         |
+                        JDBCPostgreSQLAdapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6acf8>,
+        driver_args={},
+        adapter_args={})
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from PostgreSQLAdapter:
+      CONTAINS,
+      ENDSWITH,
+      LIKE,
+      RANDOM,
+      STARTSWITH,
+      commit_prepared,
+      create_sequence_and_triggers,
+      distributed_transaction_begin,
+      lastrowid,
+      prepare,
+      rollback_prepared,
+      sequence_name
+      
    
+    
    Inherited from BaseAdapter:
+      ADD,
+      AGGREGATE,
+      ALLOW_NULL,
+      AND,
+      AS,
+      BELONGS,
+      COALESCE_ZERO,
+      COMMA,
+      DIV,
+      EQ,
+      EXTRACT,
+      GE,
+      GT,
+      INVERT,
+      JOIN,
+      LE,
+      LEFT_JOIN,
+      LOWER,
+      LT,
+      MOD,
+      MUL,
+      NE,
+      NOT,
+      NOT_NULL,
+      ON,
+      OR,
+      PRIMARY_KEY,
+      SUB,
+      SUBSTRING,
+      UPPER,
+      alias,
+      bulk_insert,
+      close,
+      commit,
+      concat_add,
+      constraint_name,
+      count,
+      create_table,
+      delete,
+      drop,
+      execute,
+      expand,
+      file_close,
+      file_delete,
+      file_exists,
+      file_open,
+      filter_tenant,
+      get_table,
+      insert,
+      integrity_error,
+      integrity_error_class,
+      log_execute,
+      migrate_table,
+      parse,
+      represent,
+      represent_exceptions,
+      rollback,
+      rowslice,
+      select,
+      select_limitby,
+      tables,
+      trigger_name,
+      truncate,
+      update
+      
    
+    
        
    Inherited from BaseAdapter (private):
+      _count,
+      _delete,
+      _drop,
+      _insert,
+      _select,
+      _truncate,
+      _update
+      
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+    
    Inherited from PostgreSQLAdapter:
+      driver,
+      support_distributed_transaction,
+      types
+      
    
+    
    Inherited from BaseAdapter:
+      commit_on_alter_table,
+      maxcharlength,
+      uploads_in_blob
+      
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6acf8>,
+        driver_args={},
+        adapter_args={})
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      PostgreSQLAdapter.__init__
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.JDBCSQLiteAdapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.JDBCSQLiteAdapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.JDBCSQLiteAdapter-class.html
@@ -0,0 +1,464 @@
+
+
+
+
+  web2py.gluon.dal.JDBCSQLiteAdapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class JDBCSQLiteAdapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class JDBCSQLiteAdapter
    source code

    
+
    +    object --+            
+             |            
+ConnectionPool --+        
+                 |        
+       BaseAdapter --+    
+                     |    
+         SQLiteAdapter --+
+                         |
+                        JDBCSQLiteAdapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd69f50>,
+        driver_args={},
+        adapter_args={})
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    execute(self,
+        a)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from SQLiteAdapter:
+      EXTRACT,
+      lastrowid
+      
    
+    
        
    Inherited from SQLiteAdapter (private):
+      _truncate
+      
    
+    
    Inherited from BaseAdapter:
+      ADD,
+      AGGREGATE,
+      ALLOW_NULL,
+      AND,
+      AS,
+      BELONGS,
+      COALESCE_ZERO,
+      COMMA,
+      CONTAINS,
+      DIV,
+      ENDSWITH,
+      EQ,
+      GE,
+      GT,
+      INVERT,
+      JOIN,
+      LE,
+      LEFT_JOIN,
+      LIKE,
+      LOWER,
+      LT,
+      MOD,
+      MUL,
+      NE,
+      NOT,
+      NOT_NULL,
+      ON,
+      OR,
+      PRIMARY_KEY,
+      RANDOM,
+      STARTSWITH,
+      SUB,
+      SUBSTRING,
+      UPPER,
+      alias,
+      bulk_insert,
+      close,
+      commit,
+      commit_prepared,
+      concat_add,
+      constraint_name,
+      count,
+      create_sequence_and_triggers,
+      create_table,
+      delete,
+      distributed_transaction_begin,
+      drop,
+      expand,
+      file_close,
+      file_delete,
+      file_exists,
+      file_open,
+      filter_tenant,
+      get_table,
+      insert,
+      integrity_error,
+      integrity_error_class,
+      log_execute,
+      migrate_table,
+      parse,
+      prepare,
+      represent,
+      represent_exceptions,
+      rollback,
+      rollback_prepared,
+      rowslice,
+      select,
+      select_limitby,
+      sequence_name,
+      tables,
+      trigger_name,
+      truncate,
+      update
+      
    
+    
        
    Inherited from BaseAdapter (private):
+      _count,
+      _delete,
+      _drop,
+      _insert,
+      _select,
+      _update
+      
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from SQLiteAdapter:
+      web2py_extract
+      
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        driver = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+    
    Inherited from BaseAdapter:
+      commit_on_alter_table,
+      maxcharlength,
+      support_distributed_transaction,
+      types,
+      uploads_in_blob
+      
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd69f50>,
+        driver_args={},
+        adapter_args={})
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      SQLiteAdapter.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    execute(self,
+        a)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.execute
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.MSSQL2Adapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.MSSQL2Adapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.MSSQL2Adapter-class.html
@@ -0,0 +1,500 @@
+
+
+
+
+  web2py.gluon.dal.MSSQL2Adapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class MSSQL2Adapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class MSSQL2Adapter
    source code

    
+
    +    object --+            
+             |            
+ConnectionPool --+        
+                 |        
+       BaseAdapter --+    
+                     |    
+          MSSQLAdapter --+
+                         |
+                        MSSQL2Adapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    represent(self,
+        obj,
+        fieldtype)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    execute(self,
+        a)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from MSSQLAdapter:
+      ALLOW_NULL,
+      EXTRACT,
+      LEFT_JOIN,
+      PRIMARY_KEY,
+      RANDOM,
+      SUBSTRING,
+      __init__,
+      integrity_error_class,
+      lastrowid,
+      represent_exceptions,
+      rowslice,
+      select_limitby
+      
    
+    
    Inherited from BaseAdapter:
+      ADD,
+      AGGREGATE,
+      AND,
+      AS,
+      BELONGS,
+      COALESCE_ZERO,
+      COMMA,
+      CONTAINS,
+      DIV,
+      ENDSWITH,
+      EQ,
+      GE,
+      GT,
+      INVERT,
+      JOIN,
+      LE,
+      LIKE,
+      LOWER,
+      LT,
+      MOD,
+      MUL,
+      NE,
+      NOT,
+      NOT_NULL,
+      ON,
+      OR,
+      STARTSWITH,
+      SUB,
+      UPPER,
+      alias,
+      bulk_insert,
+      close,
+      commit,
+      commit_prepared,
+      concat_add,
+      constraint_name,
+      count,
+      create_sequence_and_triggers,
+      create_table,
+      delete,
+      distributed_transaction_begin,
+      drop,
+      expand,
+      file_close,
+      file_delete,
+      file_exists,
+      file_open,
+      filter_tenant,
+      get_table,
+      insert,
+      integrity_error,
+      log_execute,
+      migrate_table,
+      parse,
+      prepare,
+      rollback,
+      rollback_prepared,
+      select,
+      sequence_name,
+      tables,
+      trigger_name,
+      truncate,
+      update
+      
    
+    
        
    Inherited from BaseAdapter (private):
+      _count,
+      _delete,
+      _drop,
+      _insert,
+      _select,
+      _truncate,
+      _update
+      
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        types = {'blob': 'IMAGE', 'boolean': 'CHAR(1)', 'date': 'DATET...
+    
    
+    
    Inherited from MSSQLAdapter:
+      driver
+      
    
+    
    Inherited from BaseAdapter:
+      commit_on_alter_table,
+      maxcharlength,
+      support_distributed_transaction,
+      uploads_in_blob
+      
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    represent(self,
+        obj,
+        fieldtype)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.represent
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    execute(self,
+        a)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.execute
+    
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    types
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'blob': 'IMAGE',
+ 'boolean': 'CHAR(1)',
+ 'date': 'DATETIME',
+ 'datetime': 'DATETIME',
+ 'decimal': 'NUMERIC(%(precision)s,%(scale)s)',
+ 'double': 'FLOAT',
+ 'id': 'INT IDENTITY PRIMARY KEY',
+ 'integer': 'INT',
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.MSSQLAdapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.MSSQLAdapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.MSSQLAdapter-class.html
@@ -0,0 +1,930 @@
+
+
+
+
+  web2py.gluon.dal.MSSQLAdapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class MSSQLAdapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class MSSQLAdapter
    source code

    
+
    +    object --+        
+             |        
+ConnectionPool --+    
+                 |    
+       BaseAdapter --+
+                     |
+                    MSSQLAdapter
+
    
+
+
    Known Subclasses:
    
+
    
+    MSSQL2Adapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    EXTRACT(self,
+        field,
+        what)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    LEFT_JOIN(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    RANDOM(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    ALLOW_NULL(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    SUBSTRING(self,
+        field,
+        parameters)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    PRIMARY_KEY(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    select_limitby(self,
+        sql_s,
+        sql_f,
+        sql_t,
+        sql_w,
+        sql_o,
+        limitby)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    represent_exceptions(self,
+        obj,
+        fieldtype)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6b8c0>,
+        driver_args={},
+        adapter_args={},
+        fake_connect=True)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    lastrowid(self,
+        table)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    integrity_error_class(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    rowslice(self,
+        rows,
+        minimum=0,
+        maximum=1)
    
+      by default this function does nothing, overload when db does not 
+      do slicing    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from BaseAdapter:
+      ADD,
+      AGGREGATE,
+      AND,
+      AS,
+      BELONGS,
+      COALESCE_ZERO,
+      COMMA,
+      CONTAINS,
+      DIV,
+      ENDSWITH,
+      EQ,
+      GE,
+      GT,
+      INVERT,
+      JOIN,
+      LE,
+      LIKE,
+      LOWER,
+      LT,
+      MOD,
+      MUL,
+      NE,
+      NOT,
+      NOT_NULL,
+      ON,
+      OR,
+      STARTSWITH,
+      SUB,
+      UPPER,
+      alias,
+      bulk_insert,
+      close,
+      commit,
+      commit_prepared,
+      concat_add,
+      constraint_name,
+      count,
+      create_sequence_and_triggers,
+      create_table,
+      delete,
+      distributed_transaction_begin,
+      drop,
+      execute,
+      expand,
+      file_close,
+      file_delete,
+      file_exists,
+      file_open,
+      filter_tenant,
+      get_table,
+      insert,
+      integrity_error,
+      log_execute,
+      migrate_table,
+      parse,
+      prepare,
+      represent,
+      rollback,
+      rollback_prepared,
+      select,
+      sequence_name,
+      tables,
+      trigger_name,
+      truncate,
+      update
+      
    
+    
        
    Inherited from BaseAdapter (private):
+      _count,
+      _delete,
+      _drop,
+      _insert,
+      _select,
+      _truncate,
+      _update
+      
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        driver = globals().get('pyodbc', None)
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        types = {'blob': 'IMAGE', 'boolean': 'BIT', 'date': 'DATETIME'...
+    
    
+    
    Inherited from BaseAdapter:
+      commit_on_alter_table,
+      maxcharlength,
+      support_distributed_transaction,
+      uploads_in_blob
+      
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    EXTRACT(self,
+        field,
+        what)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.EXTRACT
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    LEFT_JOIN(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.LEFT_JOIN
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    RANDOM(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.RANDOM
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    ALLOW_NULL(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.ALLOW_NULL
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    SUBSTRING(self,
+        field,
+        parameters)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.SUBSTRING
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    PRIMARY_KEY(self,
+        key)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.PRIMARY_KEY
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    select_limitby(self,
+        sql_s,
+        sql_f,
+        sql_t,
+        sql_w,
+        sql_o,
+        limitby)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.select_limitby
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    represent_exceptions(self,
+        obj,
+        fieldtype)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.represent_exceptions
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6b8c0>,
+        driver_args={},
+        adapter_args={},
+        fake_connect=True)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      BaseAdapter.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    lastrowid(self,
+        table)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.lastrowid
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    integrity_error_class(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.integrity_error_class
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    rowslice(self,
+        rows,
+        minimum=0,
+        maximum=1)
+  
    
+      		source code 
+    
    
+  
+  by default this function does nothing, overload when db does not do 
+  slicing
+  
    
+    
    Overrides:
+      BaseAdapter.rowslice
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    types
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'blob': 'IMAGE',
+ 'boolean': 'BIT',
+ 'date': 'DATETIME',
+ 'datetime': 'DATETIME',
+ 'decimal': 'NUMERIC(%(precision)s,%(scale)s)',
+ 'double': 'FLOAT',
+ 'id': 'INT IDENTITY PRIMARY KEY',
+ 'integer': 'INT',
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.MongoDBAdapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.MongoDBAdapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.MongoDBAdapter-class.html
@@ -0,0 +1,695 @@
+
+
+
+
+  web2py.gluon.dal.MongoDBAdapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class MongoDBAdapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class MongoDBAdapter
    source code

    
+
    +    object --+            
+             |            
+ConnectionPool --+        
+                 |        
+       BaseAdapter --+    
+                     |    
+          NoSQLAdapter --+
+                         |
+                        MongoDBAdapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        uri='mongodb://127.0.0.1:5984/db',
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd739b0>,
+        driver_args={},
+        adapter_args={})
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    insert(self,
+        table,
+        fields)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    count(self,
+        query)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    select(self,
+        query,
+        fields,
+        attributes)
    
+      Always returns a Rows object, even if it may be empty    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    delete(self,
+        tablename,
+        query)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    update(self,
+        tablename,
+        query,
+        fields)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from NoSQLAdapter:
+      ADD,
+      AGGREGATE,
+      AND,
+      AS,
+      DIV,
+      ENDSWITH,
+      EXTRACT,
+      LEFT_JOIN,
+      LIKE,
+      LOWER,
+      MUL,
+      ON,
+      OR,
+      PRIMARY_KEY,
+      RANDOM,
+      STARTSWITH,
+      SUB,
+      SUBSTRING,
+      UPPER,
+      alias,
+      close,
+      commit,
+      commit_prepared,
+      concat_add,
+      constraint_name,
+      create_sequence_and_triggers,
+      distributed_transaction_begin,
+      drop,
+      execute,
+      integrity_error_class,
+      lastrowid,
+      log_execute,
+      migrate_table,
+      prepare,
+      represent,
+      represent_exceptions,
+      rollback,
+      rollback_prepared,
+      rowslice
+      
    
+    
        
    Inherited from NoSQLAdapter (private):
+      _count,
+      _delete,
+      _insert,
+      _select,
+      _update
+      
    
+    
    Inherited from BaseAdapter:
+      ALLOW_NULL,
+      BELONGS,
+      COALESCE_ZERO,
+      COMMA,
+      CONTAINS,
+      EQ,
+      GE,
+      GT,
+      INVERT,
+      JOIN,
+      LE,
+      LT,
+      MOD,
+      NE,
+      NOT,
+      NOT_NULL,
+      bulk_insert,
+      create_table,
+      expand,
+      file_close,
+      file_delete,
+      file_exists,
+      file_open,
+      filter_tenant,
+      get_table,
+      integrity_error,
+      parse,
+      select_limitby,
+      sequence_name,
+      tables,
+      trigger_name,
+      truncate
+      
    
+    
        
    Inherited from BaseAdapter (private):
+      _drop,
+      _truncate
+      
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from NoSQLAdapter:
+      to_unicode
+      
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        uploads_in_blob = True
+    
    
+       
+    
+        types = {'blob': <type 'str'>, 'boolean': <type 'bool'>, 'date...
+    
    
+    
    Inherited from BaseAdapter:
+      commit_on_alter_table,
+      driver,
+      maxcharlength,
+      support_distributed_transaction
+      
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        uri='mongodb://127.0.0.1:5984/db',
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd739b0>,
+        driver_args={},
+        adapter_args={})
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      BaseAdapter.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    insert(self,
+        table,
+        fields)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.insert
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    count(self,
+        query)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.count
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    select(self,
+        query,
+        fields,
+        attributes)
+  
    
+      		source code 
+    
    
+  
+  Always returns a Rows object, even if it may be empty
+  
    
+    
    Overrides:
+      BaseAdapter.select
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    delete(self,
+        tablename,
+        query)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.delete
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    update(self,
+        tablename,
+        query,
+        fields)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.update
+    
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    types
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'blob': <type 'str'>,
+ 'boolean': <type 'bool'>,
+ 'date': <type 'datetime.date'>,
+ 'datetime': <type 'datetime.datetime'>,
+ 'double': <type 'float'>,
+ 'id': <type 'long'>,
+ 'integer': <type 'long'>,
+ 'list:integer': <type 'list'>,
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.MySQLAdapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.MySQLAdapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.MySQLAdapter-class.html
@@ -0,0 +1,887 @@
+
+
+
+
+  web2py.gluon.dal.MySQLAdapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class MySQLAdapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class MySQLAdapter
    source code

    
+
    +    object --+        
+             |        
+ConnectionPool --+    
+                 |    
+       BaseAdapter --+
+                     |
+                    MySQLAdapter
+
    
+
+
    Known Subclasses:
    
+
    
+    CubridAdapter,
+    GoogleSQLAdapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    RANDOM(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    SUBSTRING(self,
+        field,
+        parameters)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _drop(self,
+        table,
+        mode)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    distributed_transaction_begin(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    prepare(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    commit_prepared(self,
+        ley)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    rollback_prepared(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    concat_add(self,
+        table)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6a500>,
+        driver_args={},
+        adapter_args={})
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    lastrowid(self,
+        table)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from BaseAdapter:
+      ADD,
+      AGGREGATE,
+      ALLOW_NULL,
+      AND,
+      AS,
+      BELONGS,
+      COALESCE_ZERO,
+      COMMA,
+      CONTAINS,
+      DIV,
+      ENDSWITH,
+      EQ,
+      EXTRACT,
+      GE,
+      GT,
+      INVERT,
+      JOIN,
+      LE,
+      LEFT_JOIN,
+      LIKE,
+      LOWER,
+      LT,
+      MOD,
+      MUL,
+      NE,
+      NOT,
+      NOT_NULL,
+      ON,
+      OR,
+      PRIMARY_KEY,
+      STARTSWITH,
+      SUB,
+      UPPER,
+      alias,
+      bulk_insert,
+      close,
+      commit,
+      constraint_name,
+      count,
+      create_sequence_and_triggers,
+      create_table,
+      delete,
+      drop,
+      execute,
+      expand,
+      file_close,
+      file_delete,
+      file_exists,
+      file_open,
+      filter_tenant,
+      get_table,
+      insert,
+      integrity_error,
+      integrity_error_class,
+      log_execute,
+      migrate_table,
+      parse,
+      represent,
+      represent_exceptions,
+      rollback,
+      rowslice,
+      select,
+      select_limitby,
+      sequence_name,
+      tables,
+      trigger_name,
+      truncate,
+      update
+      
    
+    
        
    Inherited from BaseAdapter (private):
+      _count,
+      _delete,
+      _insert,
+      _select,
+      _truncate,
+      _update
+      
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        driver
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        maxcharlength = 255
+    
    
+       
+    
+        commit_on_alter_table = True
+    
    
+       
+    
+        support_distributed_transaction = True
+    
    
+       
+    
+        types = {'blob': 'LONGBLOB', 'boolean': 'CHAR(1)', 'date': 'DA...
+    
    
+    
    Inherited from BaseAdapter:
+      uploads_in_blob
+      
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    RANDOM(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.RANDOM
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    SUBSTRING(self,
+        field,
+        parameters)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.SUBSTRING
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _drop(self,
+        table,
+        mode)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter._drop
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    distributed_transaction_begin(self,
+        key)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.distributed_transaction_begin
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    prepare(self,
+        key)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.prepare
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    commit_prepared(self,
+        ley)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.commit_prepared
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    rollback_prepared(self,
+        key)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.rollback_prepared
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    concat_add(self,
+        table)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.concat_add
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6a500>,
+        driver_args={},
+        adapter_args={})
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      BaseAdapter.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    lastrowid(self,
+        table)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.lastrowid
+    
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    driver
    
+  
    PyMySQL: A pure-Python drop-in replacement for MySQLdb.
    
+  
    Copyright (c) 2010 PyMySQL contributors
    
+  
    Permission is hereby granted, free of charge, to any person obtaining 
+  a copy of this software and associated documentation files (the 
+  "Software"), to deal in the Software without restriction, 
+  including without limitation the rights to use, copy, modify, merge, 
+  publish, distribute, sublicense, and/or sell copies of the Software, and 
+  to permit persons to whom the Software is furnished to do so, subject to 
+  the following conditions:
    
+  
    The above copyright notice and this permission notice shall be 
+  included in all copies or substantial portions of the Software.
    
+  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY 
+  KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 
+  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
+  NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, 
+  DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR 
+  OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+  USE OR OTHER DEALINGS IN THE SOFTWARE.
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    web2py.gluon.contrib.pymysql
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    types
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'blob': 'LONGBLOB',
+ 'boolean': 'CHAR(1)',
+ 'date': 'DATE',
+ 'datetime': 'DATETIME',
+ 'decimal': 'NUMERIC(%(precision)s,%(scale)s)',
+ 'double': 'DOUBLE',
+ 'id': 'INT AUTO_INCREMENT NOT NULL',
+ 'integer': 'INT',
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.NoSQLAdapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.NoSQLAdapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.NoSQLAdapter-class.html
@@ -0,0 +1,2158 @@
+
+
+
+
+  web2py.gluon.dal.NoSQLAdapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class NoSQLAdapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class NoSQLAdapter
    source code

    
+
    +    object --+        
+             |        
+ConnectionPool --+    
+                 |    
+       BaseAdapter --+
+                     |
+                    NoSQLAdapter
+
    
+
+
    Known Subclasses:
    
+
    
+    CouchDBAdapter,
+    GoogleDatastoreAdapter,
+    MongoDBAdapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    represent(self,
+        obj,
+        fieldtype)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _insert(self,
+        table,
+        fields)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _count(self,
+        query,
+        distinct=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _select(self,
+        query,
+        fields,
+        attributes)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _delete(self,
+        tablename,
+        query)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _update(self,
+        tablename,
+        query,
+        fields)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    commit(self)
    
+      remember: no transactions on many NoSQL    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    rollback(self)
    
+      remember: no transactions on many NoSQL    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    close(self)
    
+      remember: no transactions on many NoSQL    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    OR(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    AND(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    AS(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    ON(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    STARTSWITH(self,
+        first,
+        second=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    ENDSWITH(self,
+        first,
+        second=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    ADD(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    SUB(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    MUL(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    DIV(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    LOWER(self,
+        first)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    UPPER(self,
+        first)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    EXTRACT(self,
+        first,
+        what)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    AGGREGATE(self,
+        first,
+        what)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    LEFT_JOIN(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    RANDOM(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    SUBSTRING(self,
+        field,
+        parameters)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    PRIMARY_KEY(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    LIKE(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    drop(self,
+        table,
+        mode)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    alias(self,
+        table,
+        alias)
    
+      given a table object, makes a new table object with alias 
+      name.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    migrate_table(self,
+        *a,
+        **b)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    distributed_transaction_begin(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    prepare(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    commit_prepared(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    rollback_prepared(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    concat_add(self,
+        table)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    constraint_name(self,
+        table,
+        fieldname)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    create_sequence_and_triggers(self,
+        query,
+        table,
+        **args)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    log_execute(self,
+        *a,
+        **b)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    execute(self,
+        *a,
+        **b)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    represent_exceptions(self,
+        obj,
+        fieldtype)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    lastrowid(self,
+        table)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    integrity_error_class(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    rowslice(self,
+        rows,
+        minimum=0,
+        maximum=1)
    
+      by default this function does nothing, overload when db does not 
+      do slicing    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from BaseAdapter:
+      ALLOW_NULL,
+      BELONGS,
+      COALESCE_ZERO,
+      COMMA,
+      CONTAINS,
+      EQ,
+      GE,
+      GT,
+      INVERT,
+      JOIN,
+      LE,
+      LT,
+      MOD,
+      NE,
+      NOT,
+      NOT_NULL,
+      __init__,
+      bulk_insert,
+      count,
+      create_table,
+      delete,
+      expand,
+      file_close,
+      file_delete,
+      file_exists,
+      file_open,
+      filter_tenant,
+      get_table,
+      insert,
+      integrity_error,
+      parse,
+      select,
+      select_limitby,
+      sequence_name,
+      tables,
+      trigger_name,
+      truncate,
+      update
+      
    
+    
        
    Inherited from BaseAdapter (private):
+      _drop,
+      _truncate
+      
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    to_unicode(obj)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+    
    Inherited from BaseAdapter:
+      commit_on_alter_table,
+      driver,
+      maxcharlength,
+      support_distributed_transaction,
+      types,
+      uploads_in_blob
+      
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    represent(self,
+        obj,
+        fieldtype)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.represent
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _insert(self,
+        table,
+        fields)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter._insert
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _count(self,
+        query,
+        distinct=1)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter._count
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _select(self,
+        query,
+        fields,
+        attributes)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter._select
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _delete(self,
+        tablename,
+        query)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter._delete
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _update(self,
+        tablename,
+        query,
+        fields)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter._update
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    commit(self)
+  
    
+      		source code 
+    
    
+  
+  remember: no transactions on many NoSQL
+  
    
+    
    Overrides:
+      BaseAdapter.commit
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    rollback(self)
+  
    
+      		source code 
+    
    
+  
+  remember: no transactions on many NoSQL
+  
    
+    
    Overrides:
+      BaseAdapter.rollback
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    close(self)
+  
    
+      		source code 
+    
    
+  
+  remember: no transactions on many NoSQL
+  
    
+    
    Overrides:
+      BaseAdapter.close
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    OR(self,
+        first,
+        second)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.OR
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    AND(self,
+        first,
+        second)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.AND
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    AS(self,
+        first,
+        second)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.AS
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    ON(self,
+        first,
+        second)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.ON
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    STARTSWITH(self,
+        first,
+        second=1)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.STARTSWITH
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    ENDSWITH(self,
+        first,
+        second=1)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.ENDSWITH
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    ADD(self,
+        first,
+        second)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.ADD
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    SUB(self,
+        first,
+        second)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.SUB
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    MUL(self,
+        first,
+        second)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.MUL
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    DIV(self,
+        first,
+        second)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.DIV
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    LOWER(self,
+        first)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.LOWER
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    UPPER(self,
+        first)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.UPPER
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    EXTRACT(self,
+        first,
+        what)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.EXTRACT
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    AGGREGATE(self,
+        first,
+        what)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.AGGREGATE
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    LEFT_JOIN(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.LEFT_JOIN
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    RANDOM(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.RANDOM
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    SUBSTRING(self,
+        field,
+        parameters)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.SUBSTRING
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    PRIMARY_KEY(self,
+        key)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.PRIMARY_KEY
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    LIKE(self,
+        first,
+        second)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.LIKE
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    drop(self,
+        table,
+        mode)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.drop
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    alias(self,
+        table,
+        alias)
+  
    
+      		source code 
+    
    
+  
+  given a table object, makes a new table object with alias name.
+  
    
+    
    Overrides:
+      BaseAdapter.alias
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    migrate_table(self,
+        *a,
+        **b)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.migrate_table
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    distributed_transaction_begin(self,
+        key)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.distributed_transaction_begin
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    prepare(self,
+        key)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.prepare
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    commit_prepared(self,
+        key)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.commit_prepared
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    rollback_prepared(self,
+        key)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.rollback_prepared
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    concat_add(self,
+        table)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.concat_add
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    constraint_name(self,
+        table,
+        fieldname)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.constraint_name
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    create_sequence_and_triggers(self,
+        query,
+        table,
+        **args)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.create_sequence_and_triggers
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    log_execute(self,
+        *a,
+        **b)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.log_execute
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    execute(self,
+        *a,
+        **b)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.execute
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    represent_exceptions(self,
+        obj,
+        fieldtype)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.represent_exceptions
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    lastrowid(self,
+        table)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.lastrowid
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    integrity_error_class(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.integrity_error_class
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    rowslice(self,
+        rows,
+        minimum=0,
+        maximum=1)
+  
    
+      		source code 
+    
    
+  
+  by default this function does nothing, overload when db does not do 
+  slicing
+  
    
+    
    Overrides:
+      BaseAdapter.rowslice
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.OracleAdapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.OracleAdapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.OracleAdapter-class.html
@@ -0,0 +1,997 @@
+
+
+
+
+  web2py.gluon.dal.OracleAdapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class OracleAdapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class OracleAdapter
    source code

    
+
    +    object --+        
+             |        
+ConnectionPool --+    
+                 |    
+       BaseAdapter --+
+                     |
+                    OracleAdapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    sequence_name(self,
+        tablename)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    trigger_name(self,
+        tablename)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    LEFT_JOIN(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    RANDOM(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    NOT_NULL(self,
+        default,
+        field_type)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _drop(self,
+        table,
+        mode)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    select_limitby(self,
+        sql_s,
+        sql_f,
+        sql_t,
+        sql_w,
+        sql_o,
+        limitby)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    constraint_name(self,
+        tablename,
+        fieldname)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    represent_exceptions(self,
+        obj,
+        fieldtype)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6b2a8>,
+        driver_args={},
+        adapter_args={})
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    execute(self,
+        command)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    create_sequence_and_triggers(self,
+        query,
+        table,
+        **args)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    lastrowid(self,
+        table)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from BaseAdapter:
+      ADD,
+      AGGREGATE,
+      ALLOW_NULL,
+      AND,
+      AS,
+      BELONGS,
+      COALESCE_ZERO,
+      COMMA,
+      CONTAINS,
+      DIV,
+      ENDSWITH,
+      EQ,
+      EXTRACT,
+      GE,
+      GT,
+      INVERT,
+      JOIN,
+      LE,
+      LIKE,
+      LOWER,
+      LT,
+      MOD,
+      MUL,
+      NE,
+      NOT,
+      ON,
+      OR,
+      PRIMARY_KEY,
+      STARTSWITH,
+      SUB,
+      SUBSTRING,
+      UPPER,
+      alias,
+      bulk_insert,
+      close,
+      commit,
+      commit_prepared,
+      concat_add,
+      count,
+      create_table,
+      delete,
+      distributed_transaction_begin,
+      drop,
+      expand,
+      file_close,
+      file_delete,
+      file_exists,
+      file_open,
+      filter_tenant,
+      get_table,
+      insert,
+      integrity_error,
+      integrity_error_class,
+      log_execute,
+      migrate_table,
+      parse,
+      prepare,
+      represent,
+      rollback,
+      rollback_prepared,
+      rowslice,
+      select,
+      tables,
+      truncate,
+      update
+      
    
+    
        
    Inherited from BaseAdapter (private):
+      _count,
+      _delete,
+      _insert,
+      _select,
+      _truncate,
+      _update
+      
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        driver = globals().get('cx_Oracle', None)
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        commit_on_alter_table = True
+    
    
+       
+    
+        types = {'blob': 'CLOB', 'boolean': 'CHAR(1)', 'date': 'DATE',...
+    
    
+       
+    
+        oracle_fix = re.compile(r'[^\']*(\'[^\']*\'[^\']*)*:(?P<clob>C...
+    
    
+    
    Inherited from BaseAdapter:
+      maxcharlength,
+      support_distributed_transaction,
+      uploads_in_blob
+      
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    sequence_name(self,
+        tablename)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.sequence_name
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    trigger_name(self,
+        tablename)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.trigger_name
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    LEFT_JOIN(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.LEFT_JOIN
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    RANDOM(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.RANDOM
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    NOT_NULL(self,
+        default,
+        field_type)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.NOT_NULL
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _drop(self,
+        table,
+        mode)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter._drop
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    select_limitby(self,
+        sql_s,
+        sql_f,
+        sql_t,
+        sql_w,
+        sql_o,
+        limitby)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.select_limitby
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    constraint_name(self,
+        tablename,
+        fieldname)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.constraint_name
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    represent_exceptions(self,
+        obj,
+        fieldtype)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.represent_exceptions
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6b2a8>,
+        driver_args={},
+        adapter_args={})
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      BaseAdapter.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    execute(self,
+        command)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.execute
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    create_sequence_and_triggers(self,
+        query,
+        table,
+        **args)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.create_sequence_and_triggers
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    lastrowid(self,
+        table)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.lastrowid
+    
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    types
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'blob': 'CLOB',
+ 'boolean': 'CHAR(1)',
+ 'date': 'DATE',
+ 'datetime': 'DATE',
+ 'decimal': 'NUMERIC(%(precision)s,%(scale)s)',
+ 'double': 'FLOAT',
+ 'id': 'NUMBER PRIMARY KEY',
+ 'integer': 'INT',
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    oracle_fix
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +re.compile(r'[^\']*(\'[^\']*\'[^\']*)*:(?P<clob>CLOB\(\'([^\']+|\'\')*\
+\'\))')
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.PostgreSQLAdapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.PostgreSQLAdapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.PostgreSQLAdapter-class.html
@@ -0,0 +1,1004 @@
+
+
+
+
+  web2py.gluon.dal.PostgreSQLAdapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class PostgreSQLAdapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class PostgreSQLAdapter
    source code

    
+
    +    object --+        
+             |        
+ConnectionPool --+    
+                 |    
+       BaseAdapter --+
+                     |
+                    PostgreSQLAdapter
+
    
+
+
    Known Subclasses:
    
+
    
+    JDBCPostgreSQLAdapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    sequence_name(self,
+        table)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    RANDOM(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    distributed_transaction_begin(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    prepare(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    commit_prepared(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    rollback_prepared(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    create_sequence_and_triggers(self,
+        query,
+        table,
+        **args)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6a9b0>,
+        driver_args={},
+        adapter_args={})
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    lastrowid(self,
+        table)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    LIKE(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    STARTSWITH(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    ENDSWITH(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    CONTAINS(self,
+        first,
+        second)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from BaseAdapter:
+      ADD,
+      AGGREGATE,
+      ALLOW_NULL,
+      AND,
+      AS,
+      BELONGS,
+      COALESCE_ZERO,
+      COMMA,
+      DIV,
+      EQ,
+      EXTRACT,
+      GE,
+      GT,
+      INVERT,
+      JOIN,
+      LE,
+      LEFT_JOIN,
+      LOWER,
+      LT,
+      MOD,
+      MUL,
+      NE,
+      NOT,
+      NOT_NULL,
+      ON,
+      OR,
+      PRIMARY_KEY,
+      SUB,
+      SUBSTRING,
+      UPPER,
+      alias,
+      bulk_insert,
+      close,
+      commit,
+      concat_add,
+      constraint_name,
+      count,
+      create_table,
+      delete,
+      drop,
+      execute,
+      expand,
+      file_close,
+      file_delete,
+      file_exists,
+      file_open,
+      filter_tenant,
+      get_table,
+      insert,
+      integrity_error,
+      integrity_error_class,
+      log_execute,
+      migrate_table,
+      parse,
+      represent,
+      represent_exceptions,
+      rollback,
+      rowslice,
+      select,
+      select_limitby,
+      tables,
+      trigger_name,
+      truncate,
+      update
+      
    
+    
        
    Inherited from BaseAdapter (private):
+      _count,
+      _delete,
+      _drop,
+      _insert,
+      _select,
+      _truncate,
+      _update
+      
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        driver
    
+      A Python driver for PostgreSQL
+
+psycopg is a PostgreSQL_ database adapter for the Python_ programming
+language.
+    
    
+       
+    
+        support_distributed_transaction = True
+    
    
+       
+    
+        types = {'blob': 'BYTEA', 'boolean': 'CHAR(1)', 'date': 'DATE'...
+    
    
+    
    Inherited from BaseAdapter:
+      commit_on_alter_table,
+      maxcharlength,
+      uploads_in_blob
+      
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    sequence_name(self,
+        table)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.sequence_name
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    RANDOM(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.RANDOM
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    distributed_transaction_begin(self,
+        key)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.distributed_transaction_begin
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    prepare(self,
+        key)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.prepare
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    commit_prepared(self,
+        key)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.commit_prepared
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    rollback_prepared(self,
+        key)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.rollback_prepared
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    create_sequence_and_triggers(self,
+        query,
+        table,
+        **args)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.create_sequence_and_triggers
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6a9b0>,
+        driver_args={},
+        adapter_args={})
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      BaseAdapter.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    lastrowid(self,
+        table)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.lastrowid
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    LIKE(self,
+        first,
+        second)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.LIKE
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    STARTSWITH(self,
+        first,
+        second)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.STARTSWITH
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    ENDSWITH(self,
+        first,
+        second)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.ENDSWITH
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    CONTAINS(self,
+        first,
+        second)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.CONTAINS
+    
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    driver
    
+  
    +A Python driver for PostgreSQL
+
+psycopg is a PostgreSQL_ database adapter for the Python_ programming
+language. This is version 2, a complete rewrite of the original code to
+provide new-style classes for connection and cursor objects and other sweet
+candies. Like the original, psycopg 2 was written with the aim of being very
+small and fast, and stable as a rock.
+
+Homepage: http://initd.org/projects/psycopg2
+
+.. _PostgreSQL: http://www.postgresql.org/
+.. _Python: http://www.python.org/
+
+:Groups:
+  * `Connections creation`: connect
+  * `Value objects constructors`: Binary, Date, DateFromTicks, Time,
+    TimeFromTicks, Timestamp, TimestampFromTicks
+
+
    
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    psycopg2
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    types
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'blob': 'BYTEA',
+ 'boolean': 'CHAR(1)',
+ 'date': 'DATE',
+ 'datetime': 'TIMESTAMP',
+ 'decimal': 'NUMERIC(%(precision)s,%(scale)s)',
+ 'double': 'FLOAT8',
+ 'id': 'SERIAL PRIMARY KEY',
+ 'integer': 'INTEGER',
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.Query-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.Query-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.Query-class.html
@@ -0,0 +1,350 @@
+
+
+
+
+  web2py.gluon.dal.Query
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class Query
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Query
    source code

    
+
    +object --+
+         |
+        Query
+
    
+
+
    
+
    a query object necessary to define a set. it can be stored or can be 
+  passed to DAL.__call__() to obtain a Set
    
+  Example:
+
    +   query = db.users.name=='Max'
+   set = db(query)
+   records = set.select()
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        op,
+        first=1,
+        second=1)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __str__(self)
    
+      str(x)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __and__(self,
+        other)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __or__(self,
+        other)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __invert__(self)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        op,
+        first=1,
+        second=1)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __str__(self)
+    
    (Informal representation operator)
+  
    
+      		source code 
+    
    
+  
+  str(x)
+  
    
+    
    Overrides:
+      object.__str__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.Reference-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.Reference-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.Reference-class.html
@@ -0,0 +1,358 @@
+
+
+
+
+  web2py.gluon.dal.Reference
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class Reference
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Reference
    source code

    
+
    +object --+    
+         |    
+       int --+
+             |
+            Reference
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __allocate(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getattr__(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __setattr__(self,
+        key,
+        value)
    
+      x.__setattr__('name', value) <==> x.name = value    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getitem__(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __setitem__(self,
+        key,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from int:
+      __abs__,
+      __add__,
+      __and__,
+      __cmp__,
+      __coerce__,
+      __div__,
+      __divmod__,
+      __float__,
+      __floordiv__,
+      __getattribute__,
+      __getnewargs__,
+      __hash__,
+      __hex__,
+      __index__,
+      __int__,
+      __invert__,
+      __long__,
+      __lshift__,
+      __mod__,
+      __mul__,
+      __neg__,
+      __new__,
+      __nonzero__,
+      __oct__,
+      __or__,
+      __pos__,
+      __pow__,
+      __radd__,
+      __rand__,
+      __rdiv__,
+      __rdivmod__,
+      __repr__,
+      __rfloordiv__,
+      __rlshift__,
+      __rmod__,
+      __rmul__,
+      __ror__,
+      __rpow__,
+      __rrshift__,
+      __rshift__,
+      __rsub__,
+      __rtruediv__,
+      __rxor__,
+      __str__,
+      __sub__,
+      __truediv__,
+      __xor__
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __init__,
+      __reduce__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __setattr__(self,
+        key,
+        value)
+  
    
+      		source code 
+    
    
+  
+  x.__setattr__('name', value) <==> x.name = value
+  
    
+    
    Overrides:
+      object.__setattr__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.Row-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.Row-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.Row-class.html
@@ -0,0 +1,571 @@
+
+
+
+
+  web2py.gluon.dal.Row
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class Row
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Row
    source code

    
+
    +object --+    
+         |    
+      dict --+
+             |
+            Row
+
    
+
+
    
+a dictionary that lets you do d['a'] as well as d.a this is only used 
+  to store a Row

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getitem__(self,
+        key)
    
+      x[y]    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __setitem__(self,
+        key,
+        value)
    
+      x[i]=y    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getattr__(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __setattr__(self,
+        key,
+        value)
    
+      x.__setattr__('name', value) <==> x.name = value    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __repr__(self)
    
+      repr(x)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __int__(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __eq__(self,
+        other)
    
+      x==y    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __ne__(self,
+        other)
    
+      x!=y    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __copy__(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    as_dict(self,
+        datetime_to_str=True)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from dict:
+      __cmp__,
+      __contains__,
+      __delitem__,
+      __ge__,
+      __getattribute__,
+      __gt__,
+      __hash__,
+      __init__,
+      __iter__,
+      __le__,
+      __len__,
+      __lt__,
+      __new__,
+      clear,
+      copy,
+      fromkeys,
+      get,
+      has_key,
+      items,
+      iteritems,
+      iterkeys,
+      itervalues,
+      keys,
+      pop,
+      popitem,
+      setdefault,
+      update,
+      values
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __reduce__,
+      __reduce_ex__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __getitem__(self,
+        key)
+    
    (Indexing operator)
+  
    
+      		source code 
+    
    
+  
+  x[y]
+  
    
+    
    Overrides:
+      dict.__getitem__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __setitem__(self,
+        key,
+        value)
+    
    (Index assignment operator)
+  
    
+      		source code 
+    
    
+  
+  x[i]=y
+  
    
+    
    Overrides:
+      dict.__setitem__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __setattr__(self,
+        key,
+        value)
+  
    
+      		source code 
+    
    
+  
+  x.__setattr__('name', value) <==> x.name = value
+  
    
+    
    Overrides:
+      object.__setattr__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __repr__(self)
+    
    (Representation operator)
+  
    
+      		source code 
+    
    
+  
+  repr(x)
+  
    
+    
    Overrides:
+      dict.__repr__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __eq__(self,
+        other)
+    
    (Equality operator)
+  
    
+      		source code 
+    
    
+  
+  x==y
+  
    
+    
    Overrides:
+      dict.__eq__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __ne__(self,
+        other)
+  
    
+      		source code 
+    
    
+  
+  x!=y
+  
    
+    
    Overrides:
+      dict.__ne__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.Rows-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.Rows-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.Rows-class.html
@@ -0,0 +1,709 @@
+
+
+
+
+  web2py.gluon.dal.Rows
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class Rows
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Rows
    source code

    
+
    +object --+
+         |
+        Rows
+
    
+
+
    
+A wrapper for the return value of a select. It basically represents a 
+  table. It has an iterator and each row is represented as a 
+  dictionary.

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db=1,
+        records=[],
+        colnames=[],
+        compact=True,
+        rawrows=1)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    setvirtualfields(self,
+        **keyed_virtualfields)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __and__(self,
+        other)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __or__(self,
+        other)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __nonzero__(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __len__(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getslice__(self,
+        a,
+        b)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getitem__(self,
+        i)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __iter__(self)
    
+      iterator over records    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __str__(self)
    
+      serializes the table into a csv file    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    first(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    last(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    find(self,
+        f)
    
+      returns a new Rows object, a subset of the original object, 
+      filtered by the function f    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    exclude(self,
+        f)
    
+      removes elements from the calling Rows object, filtered by the 
+      function f, and returns a new Rows object containing the removed 
+      elements    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    sort(self,
+        f,
+        reverse=True)
    
+      returns a list of sorted elements (not sorted in place)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    as_list(self,
+        compact=True,
+        storage_to_dict=True,
+        datetime_to_str=True)
    
+      returns the data as a list or dictionary.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    as_dict(self,
+        key='id',
+        compact=True,
+        storage_to_dict=True,
+        datetime_to_str=True)
    
+      returns the data as a dictionary of dictionaries 
+      (storage_to_dict=True) or records (False)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    export_to_csv_file(self,
+        ofile,
+        null='<NULL>',
+        *args,
+        **kwargs)
    
+      export data to csv, the first line contains the column names...    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    xml(self)
    
+      serializes the table using sqlhtml.SQLTABLE (if present)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    json(self,
+        mode='object',
+        default=1)
    
+      serializes the table to a JSON list of objects    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db=1,
+        records=[],
+        colnames=[],
+        compact=True,
+        rawrows=1)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __str__(self)
+    
    (Informal representation operator)
+  
    
+      		source code 
+    
    
+  
+  serializes the table into a csv file
+  
    
+    
    Overrides:
+      object.__str__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    as_list(self,
+        compact=True,
+        storage_to_dict=True,
+        datetime_to_str=True)
+  
    
+      		source code 
+    
    
+  
+  returns the data as a list or dictionary. :param storage_to_dict: when
+  True returns a dict, otherwise a list(default True) :param 
+  datetime_to_str: convert datetime fields as strings (default True)
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    as_dict(self,
+        key='id',
+        compact=True,
+        storage_to_dict=True,
+        datetime_to_str=True)
+  
    
+      		source code 
+    
    
+  
+  
    returns the data as a dictionary of dictionaries 
+  (storage_to_dict=True) or records (False)
    
+  :param key: the name of the field to be used as dict key, normally the
+  id :param compact: ? (default True) :param storage_to_dict: when True 
+  returns a dict, otherwise a list(default True) :param datetime_to_str: 
+  convert datetime fields as strings (default True)
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    export_to_csv_file(self,
+        ofile,
+        null='<NULL>',
+        *args,
+        **kwargs)
+  
    
+      		source code 
+    
    
+  
+  
    +
+export data to csv, the first line contains the column names
+
+:param ofile: where the csv must be exported to
+:param null: how null values must be represented (default '<NULL>')
+:param delimiter: delimiter to separate values (default ',')
+:param quotechar: character to use to quote string values (default '"')
+:param quoting: quote system, use csv.QUOTE_*** (default csv.QUOTE_MINIMAL)
+:param represent: use the fields .represent value (default False)
+:param colnames: list of column names to use (default self.colnames)
+                 This will only work when exporting rows objects!!!!
+                 DO NOT use this with db.export_to_csv()
+
+
    
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.SAPDBAdapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.SAPDBAdapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.SAPDBAdapter-class.html
@@ -0,0 +1,654 @@
+
+
+
+
+  web2py.gluon.dal.SAPDBAdapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class SAPDBAdapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class SAPDBAdapter
    source code

    
+
    +    object --+        
+             |        
+ConnectionPool --+    
+                 |    
+       BaseAdapter --+
+                     |
+                    SAPDBAdapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    sequence_name(self,
+        table)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    select_limitby(self,
+        sql_s,
+        sql_f,
+        sql_t,
+        sql_w,
+        sql_o,
+        limitby)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    create_sequence_and_triggers(self,
+        query,
+        table,
+        **args)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6e320>,
+        driver_args={},
+        adapter_args={})
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    lastrowid(self,
+        table)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from BaseAdapter:
+      ADD,
+      AGGREGATE,
+      ALLOW_NULL,
+      AND,
+      AS,
+      BELONGS,
+      COALESCE_ZERO,
+      COMMA,
+      CONTAINS,
+      DIV,
+      ENDSWITH,
+      EQ,
+      EXTRACT,
+      GE,
+      GT,
+      INVERT,
+      JOIN,
+      LE,
+      LEFT_JOIN,
+      LIKE,
+      LOWER,
+      LT,
+      MOD,
+      MUL,
+      NE,
+      NOT,
+      NOT_NULL,
+      ON,
+      OR,
+      PRIMARY_KEY,
+      RANDOM,
+      STARTSWITH,
+      SUB,
+      SUBSTRING,
+      UPPER,
+      alias,
+      bulk_insert,
+      close,
+      commit,
+      commit_prepared,
+      concat_add,
+      constraint_name,
+      count,
+      create_table,
+      delete,
+      distributed_transaction_begin,
+      drop,
+      execute,
+      expand,
+      file_close,
+      file_delete,
+      file_exists,
+      file_open,
+      filter_tenant,
+      get_table,
+      insert,
+      integrity_error,
+      integrity_error_class,
+      log_execute,
+      migrate_table,
+      parse,
+      prepare,
+      represent,
+      represent_exceptions,
+      rollback,
+      rollback_prepared,
+      rowslice,
+      select,
+      tables,
+      trigger_name,
+      truncate,
+      update
+      
    
+    
        
    Inherited from BaseAdapter (private):
+      _count,
+      _delete,
+      _drop,
+      _insert,
+      _select,
+      _truncate,
+      _update
+      
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        driver = globals().get('sapdb', None)
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        support_distributed_transaction = True
+    
    
+       
+    
+        types = {'blob': 'LONG', 'boolean': 'CHAR(1)', 'date': 'DATE',...
+    
    
+    
    Inherited from BaseAdapter:
+      commit_on_alter_table,
+      maxcharlength,
+      uploads_in_blob
+      
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    sequence_name(self,
+        table)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.sequence_name
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    select_limitby(self,
+        sql_s,
+        sql_f,
+        sql_t,
+        sql_w,
+        sql_o,
+        limitby)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.select_limitby
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    create_sequence_and_triggers(self,
+        query,
+        table,
+        **args)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.create_sequence_and_triggers
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6e320>,
+        driver_args={},
+        adapter_args={})
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      BaseAdapter.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    lastrowid(self,
+        table)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.lastrowid
+    
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    types
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'blob': 'LONG',
+ 'boolean': 'CHAR(1)',
+ 'date': 'DATE',
+ 'datetime': 'TIMESTAMP',
+ 'decimal': 'FIXED(%(precision)s,%(scale)s)',
+ 'double': 'FLOAT',
+ 'id': 'INT PRIMARY KEY',
+ 'integer': 'INT',
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.SQLALL-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.SQLALL-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.SQLALL-class.html
@@ -0,0 +1,289 @@
+
+
+
+
+  web2py.gluon.dal.SQLALL
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class SQLALL
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class SQLALL
    source code

    
+
    +object --+
+         |
+        SQLALL
+
    
+
+
    
+
    Helper class providing a comma-separated string having all the field 
+  names (prefixed by table name and '.')
    
+  normally only called from within gluon.sql

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        table)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __str__(self)
    
+      str(x)    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        table)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __str__(self)
+    
    (Informal representation operator)
+  
    
+      		source code 
+    
    
+  
+  str(x)
+  
    
+    
    Overrides:
+      object.__str__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.SQLCallableList-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.SQLCallableList-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.SQLCallableList-class.html
@@ -0,0 +1,232 @@
+
+
+
+
+  web2py.gluon.dal.SQLCallableList
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class SQLCallableList
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class SQLCallableList
    source code

    
+
    +object --+    
+         |    
+      list --+
+             |
+            SQLCallableList
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from list:
+      __add__,
+      __contains__,
+      __delitem__,
+      __delslice__,
+      __eq__,
+      __ge__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __gt__,
+      __hash__,
+      __iadd__,
+      __imul__,
+      __init__,
+      __iter__,
+      __le__,
+      __len__,
+      __lt__,
+      __mul__,
+      __ne__,
+      __new__,
+      __repr__,
+      __reversed__,
+      __rmul__,
+      __setitem__,
+      __setslice__,
+      append,
+      count,
+      extend,
+      index,
+      insert,
+      pop,
+      remove,
+      reverse,
+      sort
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __reduce__,
+      __reduce_ex__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.SQLCustomType-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.SQLCustomType-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.SQLCustomType-class.html
@@ -0,0 +1,374 @@
+
+
+
+
+  web2py.gluon.dal.SQLCustomType
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class SQLCustomType
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class SQLCustomType
    source code

    
+
    +object --+
+         |
+        SQLCustomType
+
    
+
+
    
+
    +
+allows defining of custom SQL types
+
+Example::
+
+    decimal = SQLCustomType(
+        type ='double',
+        native ='integer',
+        encoder =(lambda x: int(float(x) * 100)),
+        decoder = (lambda x: Decimal("0.00") + Decimal(str(float(x)/100)) )
+        )
+
+    db.define_table(
+        'example',
+        Field('value', type=decimal)
+        )
+
+:param type: the web2py type (default = 'string')
+:param native: the backend type
+:param encoder: how to encode the value to store it in the backend
+:param decoder: how to decode the value retrieved from the backend
+:param validator: what validators to use ( default = None, will use the
+    default validator for type)
+
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        type='string',
+        native=1,
+        encoder=1,
+        decoder=1,
+        validator=1,
+        _class=1)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    startswith(self,
+        dummy=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getslice__(self,
+        a=0,
+        b=100)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getitem__(self,
+        i)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __str__(self)
    
+      str(x)    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        type='string',
+        native=1,
+        encoder=1,
+        decoder=1,
+        validator=1,
+        _class=1)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __str__(self)
+    
    (Informal representation operator)
+  
    
+      		source code 
+    
    
+  
+  str(x)
+  
    
+    
    Overrides:
+      object.__str__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.SQLiteAdapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.SQLiteAdapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.SQLiteAdapter-class.html
@@ -0,0 +1,613 @@
+
+
+
+
+  web2py.gluon.dal.SQLiteAdapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class SQLiteAdapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class SQLiteAdapter
    source code

    
+
    +    object --+        
+             |        
+ConnectionPool --+    
+                 |    
+       BaseAdapter --+
+                     |
+                    SQLiteAdapter
+
    
+
+
    Known Subclasses:
    
+
    
+    JDBCSQLiteAdapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    EXTRACT(self,
+        field,
+        what)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd69d70>,
+        driver_args={},
+        adapter_args={})
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _truncate(self,
+        table,
+        mode='')
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    lastrowid(self,
+        table)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from BaseAdapter:
+      ADD,
+      AGGREGATE,
+      ALLOW_NULL,
+      AND,
+      AS,
+      BELONGS,
+      COALESCE_ZERO,
+      COMMA,
+      CONTAINS,
+      DIV,
+      ENDSWITH,
+      EQ,
+      GE,
+      GT,
+      INVERT,
+      JOIN,
+      LE,
+      LEFT_JOIN,
+      LIKE,
+      LOWER,
+      LT,
+      MOD,
+      MUL,
+      NE,
+      NOT,
+      NOT_NULL,
+      ON,
+      OR,
+      PRIMARY_KEY,
+      RANDOM,
+      STARTSWITH,
+      SUB,
+      SUBSTRING,
+      UPPER,
+      alias,
+      bulk_insert,
+      close,
+      commit,
+      commit_prepared,
+      concat_add,
+      constraint_name,
+      count,
+      create_sequence_and_triggers,
+      create_table,
+      delete,
+      distributed_transaction_begin,
+      drop,
+      execute,
+      expand,
+      file_close,
+      file_delete,
+      file_exists,
+      file_open,
+      filter_tenant,
+      get_table,
+      insert,
+      integrity_error,
+      integrity_error_class,
+      log_execute,
+      migrate_table,
+      parse,
+      prepare,
+      represent,
+      represent_exceptions,
+      rollback,
+      rollback_prepared,
+      rowslice,
+      select,
+      select_limitby,
+      sequence_name,
+      tables,
+      trigger_name,
+      truncate,
+      update
+      
    
+    
        
    Inherited from BaseAdapter (private):
+      _count,
+      _delete,
+      _drop,
+      _insert,
+      _select,
+      _update
+      
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    web2py_extract(lookup,
+        s)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        driver
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+    
    Inherited from BaseAdapter:
+      commit_on_alter_table,
+      maxcharlength,
+      support_distributed_transaction,
+      types,
+      uploads_in_blob
+      
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    EXTRACT(self,
+        field,
+        what)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.EXTRACT
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd69d70>,
+        driver_args={},
+        adapter_args={})
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      BaseAdapter.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _truncate(self,
+        table,
+        mode='')
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter._truncate
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    lastrowid(self,
+        table)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      BaseAdapter.lastrowid
+    
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    driver
    
+  
    PyMySQL: A pure-Python drop-in replacement for MySQLdb.
    
+  
    Copyright (c) 2010 PyMySQL contributors
    
+  
    Permission is hereby granted, free of charge, to any person obtaining 
+  a copy of this software and associated documentation files (the 
+  "Software"), to deal in the Software without restriction, 
+  including without limitation the rights to use, copy, modify, merge, 
+  publish, distribute, sublicense, and/or sell copies of the Software, and 
+  to permit persons to whom the Software is furnished to do so, subject to 
+  the following conditions:
    
+  
    The above copyright notice and this permission notice shall be 
+  included in all copies or substantial portions of the Software.
    
+  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY 
+  KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 
+  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
+  NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, 
+  DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR 
+  OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+  USE OR OTHER DEALINGS IN THE SOFTWARE.
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    sqlite3.dbapi2
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.Set-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.Set-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.Set-class.html
@@ -0,0 +1,467 @@
+
+
+
+
+  web2py.gluon.dal.Set
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class Set
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Set
    source code

    
+
    +object --+
+         |
+        Set
+
    
+
+
    
+
    +
+a Set represents a set of records in the database,
+the records are identified by the query=Query(...) object.
+normally the Set is generated by DAL.__call__(Query(...))
+
+given a set, for example
+   set = db(db.users.name=='Max')
+you can:
+   set.update(db.users.name='Massimo')
+   set.delete() # all elements in the set
+   set.select(orderby=db.users.id, groupby=db.users.name, limitby=(0,10))
+and take subsets:
+   subset = set(db.users.id<5)
+
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        query)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        query)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _count(self,
+        distinct=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _select(self,
+        *fields,
+        **attributes)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _delete(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _update(self,
+        **update_fields)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    isempty(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    count(self,
+        distinct=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    select(self,
+        *fields,
+        **attributes)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    delete(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    update(self,
+        **update_fields)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    validate_and_update(self,
+        **update_fields)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    delete_uploaded_files(self,
+        upload_fields=1)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        query)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.Table-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.Table-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.Table-class.html
@@ -0,0 +1,952 @@
+
+
+
+
+  web2py.gluon.dal.Table
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class Table
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Table
    source code

    
+
    +object --+    
+         |    
+      dict --+
+             |
+            Table
+
    
+
+
    
+
    an instance of this class represents a database table
    
+  Example:
+
    +   db = DAL(...)
+   db.define_table('users', Field('name'))
+   db.users.insert(name='me') # print db.users._insert(...) to see SQL
+   db.users.drop()
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        tablename,
+        *fields,
+        **args)
    
+      Initializes the table and performs checking on the provided 
+      fields.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _validate(self,
+        **vars)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _create_references(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _filter_fields(self,
+        record,
+        id=True)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _build_query(self,
+        key)
    
+      for keyed table only    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getitem__(self,
+        key)
    
+      x[y]    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        key=<function <lambda> at 0xd1ec80>,
+        **kwargs)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __setitem__(self,
+        key,
+        value)
    
+      x[i]=y    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __delitem__(self,
+        key)
    
+      del x[y]    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getattr__(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __setattr__(self,
+        key,
+        value)
    
+      x.__setattr__('name', value) <==> x.name = value    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __iter__(self)
    
+      iter(x)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __repr__(self)
    
+      repr(x)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __str__(self)
    
+      str(x)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _drop(self,
+        mode='')
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    drop(self,
+        mode='')
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _listify(self,
+        fields,
+        update=True)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _insert(self,
+        **fields)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    insert(self,
+        **fields)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    validate_and_insert(self,
+        **fields)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    update_or_insert(self,
+        key=<function <lambda> at 0xd1ec80>,
+        **values)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    bulk_insert(self,
+        items)
    
+      here items is a list of dictionaries    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _truncate(self,
+        mode=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    truncate(self,
+        mode=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    import_from_csv_file(self,
+        csvfile,
+        id_map=1,
+        null='<NULL>',
+        unique='uuid',
+        *args,
+        **kwargs)
    
+      import records from csv file.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    with_alias(self,
+        alias)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    on(self,
+        query)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from dict:
+      __cmp__,
+      __contains__,
+      __eq__,
+      __ge__,
+      __getattribute__,
+      __gt__,
+      __hash__,
+      __le__,
+      __len__,
+      __lt__,
+      __ne__,
+      __new__,
+      clear,
+      copy,
+      fromkeys,
+      get,
+      has_key,
+      items,
+      iteritems,
+      iterkeys,
+      itervalues,
+      keys,
+      pop,
+      popitem,
+      setdefault,
+      update,
+      values
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __reduce__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        tablename,
+        *fields,
+        **args)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
    Initializes the table and performs checking on the provided 
+  fields.
    
+  
    Each table will have automatically an 'id'.
    
+  
    If a field is of type Table, the fields (excluding 'id') from that 
+  table will be used instead.
    
+  :raises SyntaxError: when a supplied field is of incorrect type.
+  
    
+    
    Returns:
    
+        
    +new empty dictionary
+
+
    
+    
    Overrides:
+      dict.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __getitem__(self,
+        key)
+    
    (Indexing operator)
+  
    
+      		source code 
+    
    
+  
+  x[y]
+  
    
+    
    Overrides:
+      dict.__getitem__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __setitem__(self,
+        key,
+        value)
+    
    (Index assignment operator)
+  
    
+      		source code 
+    
    
+  
+  x[i]=y
+  
    
+    
    Overrides:
+      dict.__setitem__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __delitem__(self,
+        key)
+    
    (Index deletion operator)
+  
    
+      		source code 
+    
    
+  
+  del x[y]
+  
    
+    
    Overrides:
+      dict.__delitem__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __setattr__(self,
+        key,
+        value)
+  
    
+      		source code 
+    
    
+  
+  x.__setattr__('name', value) <==> x.name = value
+  
    
+    
    Overrides:
+      object.__setattr__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __iter__(self)
+  
    
+      		source code 
+    
    
+  
+  iter(x)
+  
    
+    
    Overrides:
+      dict.__iter__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __repr__(self)
+    
    (Representation operator)
+  
    
+      		source code 
+    
    
+  
+  repr(x)
+  
    
+    
    Overrides:
+      dict.__repr__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __str__(self)
+    
    (Informal representation operator)
+  
    
+      		source code 
+    
    
+  
+  str(x)
+  
    
+    
    Overrides:
+      object.__str__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    import_from_csv_file(self,
+        csvfile,
+        id_map=1,
+        null='<NULL>',
+        unique='uuid',
+        *args,
+        **kwargs)
+  
    
+      		source code 
+    
    
+  
+  import records from csv file. Column headers must have same names as 
+  table fields. field 'id' is ignored. If column names read 'table.file' 
+  the 'table.' prefix is ignored. 'unique' argument is a field which must 
+  be unique (typically a uuid field)
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.TeradataAdapter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.TeradataAdapter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.TeradataAdapter-class.html
@@ -0,0 +1,482 @@
+
+
+
+
+  web2py.gluon.dal.TeradataAdapter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class TeradataAdapter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class TeradataAdapter
    source code

    
+
    +    object --+            
+             |            
+ConnectionPool --+        
+                 |        
+       BaseAdapter --+    
+                     |    
+            DB2Adapter --+
+                         |
+                        TeradataAdapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6db90>,
+        driver_args={},
+        adapter_args={})
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from DB2Adapter:
+      LEFT_JOIN,
+      RANDOM,
+      execute,
+      lastrowid,
+      represent_exceptions,
+      rowslice,
+      select_limitby
+      
    
+    
    Inherited from BaseAdapter:
+      ADD,
+      AGGREGATE,
+      ALLOW_NULL,
+      AND,
+      AS,
+      BELONGS,
+      COALESCE_ZERO,
+      COMMA,
+      CONTAINS,
+      DIV,
+      ENDSWITH,
+      EQ,
+      EXTRACT,
+      GE,
+      GT,
+      INVERT,
+      JOIN,
+      LE,
+      LIKE,
+      LOWER,
+      LT,
+      MOD,
+      MUL,
+      NE,
+      NOT,
+      NOT_NULL,
+      ON,
+      OR,
+      PRIMARY_KEY,
+      STARTSWITH,
+      SUB,
+      SUBSTRING,
+      UPPER,
+      alias,
+      bulk_insert,
+      close,
+      commit,
+      commit_prepared,
+      concat_add,
+      constraint_name,
+      count,
+      create_sequence_and_triggers,
+      create_table,
+      delete,
+      distributed_transaction_begin,
+      drop,
+      expand,
+      file_close,
+      file_delete,
+      file_exists,
+      file_open,
+      filter_tenant,
+      get_table,
+      insert,
+      integrity_error,
+      integrity_error_class,
+      log_execute,
+      migrate_table,
+      parse,
+      prepare,
+      represent,
+      rollback,
+      rollback_prepared,
+      select,
+      sequence_name,
+      tables,
+      trigger_name,
+      truncate,
+      update
+      
    
+    
        
    Inherited from BaseAdapter (private):
+      _count,
+      _delete,
+      _drop,
+      _insert,
+      _select,
+      _truncate,
+      _update
+      
    
+    
    Inherited from ConnectionPool:
+      find_or_make_work_folder,
+      pool_connection
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from ConnectionPool:
+      close_all_instances,
+      set_folder
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        driver = globals().get('pyodbc', None)
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        types = {'boolean': 'CHAR(1)', 'string': 'VARCHAR(%(length)s)'...
+    
    
+    
    Inherited from BaseAdapter:
+      commit_on_alter_table,
+      maxcharlength,
+      support_distributed_transaction,
+      uploads_in_blob
+      
    
+    
    Inherited from ConnectionPool:
+      pools
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db,
+        uri,
+        pool_size=0,
+        folder=1,
+        db_codec='UTF-8',
+        credential_decoder=<function <lambda> at 0xd6db90>,
+        driver_args={},
+        adapter_args={})
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      DB2Adapter.__init__
+    
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    types
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'boolean': 'CHAR(1)', 'string': 'VARCHAR(%(length)s)', 'text': 'CLOB'\
+, 'password': 'VARCHAR(%(length)s)', 'blob': 'BLOB', 'upload': 'VARCHA\
+R(%(length)s)', 'integer': 'INT', 'double': 'DOUBLE', 'decimal': 'NUME\
+RIC(%(precision)s,%(scale)s)', 'date': 'DATE', 'time': 'TIME', 'dateti\
+me': 'TIMESTAMP', 'id': 'INTEGER GENERATED ALWAYS AS IDENTITY PRIMARY \
+KEY NOT NULL', 'reference': 'INT, FOREIGN KEY (%(field_name)s) REFEREN\
+CES %(foreign_key)s ON DELETE %(on_delete_action)s', 'reference FK': '\
+, CONSTRAINT FK_%(constraint_name)s FOREIGN KEY (%(field_name)s) REFER\
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.dal.UseDatabaseStoredFile-class.html
Index: applications/examples/static/epydoc/web2py.gluon.dal.UseDatabaseStoredFile-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.dal.UseDatabaseStoredFile-class.html
@@ -0,0 +1,211 @@
+
+
+
+
+  web2py.gluon.dal.UseDatabaseStoredFile
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module dal ::
+        Class UseDatabaseStoredFile
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class UseDatabaseStoredFile
    source code

    
+
    Known Subclasses:
    
+
    
+    GoogleSQLAdapter
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    file_exists(self,
+        filename)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    file_open(self,
+        filename,
+        mode='rb',
+        lock=True)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    file_close(self,
+        fileobj,
+        unlock=True)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    file_delete(self,
+        filename)
+            source code
+            
+          
    
+      
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.debug-module.html
Index: applications/examples/static/epydoc/web2py.gluon.debug-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.debug-module.html
@@ -0,0 +1,297 @@
+
+
+
+
+  web2py.gluon.debug
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module debug
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module debug
    source code

    
+This file is part of the web2py Web Framework Developed by Massimo Di 
+  Pierro <mdipierro@cs.depaul.edu>, limodou <limodou@gmail.com>
+  and srackham <srackham@gmail.com>. License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)

    
+
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        Pipe
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    set_trace()
    
+      breakpoint shortcut (like pdb)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    stop_trace()
    
+      stop waiting for the debugger (called atexit)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    communicate(command=1)
    
+      send command to debbuger, wait result    		
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        logger = logging.getLogger("web2py")
+    
    
+       
+    
+        pipe_in = Pipe('in')
+    
    
+       
+    
+        pipe_out = Pipe('out')
+    
    
+       
+    
+        debugger = pdb.Pdb(completekey= None, stdin= pipe_in, stdout= ...
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Variables Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    debugger
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +pdb.Pdb(completekey= None, stdin= pipe_in, stdout= pipe_out,)
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.debug-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.debug-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.debug-pysrc.html
@@ -0,0 +1,482 @@
+
+
+
+
+  web2py.gluon.debug
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module debug
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.debug
    
+
    + 1  #!/usr/bin/env python 
+ 2  # -*- coding: utf-8 -*- 
+ 3   
+ 4  """ 
+ 5  This file is part of the web2py Web Framework 
+ 6  Developed by Massimo Di Pierro <mdipierro@cs.depaul.edu>, 
+ 7  limodou <limodou@gmail.com> and srackham <srackham@gmail.com>. 
+ 8  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+ 9   
+10  """ 
+11   
+12  import logging 
+13  import pdb 
+14  import Queue 
+15  import sys 
+16   
+17  logger = logging.getLogger("web2py") 
+18   
+
    19 -class Pipe(Queue.Queue): 
+
    20 -    def __init__(self, name, mode='r', *args, **kwargs): 
+
    21          self.__name = name 
+22          Queue.Queue.__init__(self, *args, **kwargs) 
+
    23   
+
    24 -    def write(self, data): 
+
    25          logger.debug("debug %s writting %s" % (self.__name, data)) 
+26          self.put(data) 
+
    27   
+
    28 -    def flush(self): 
+
    29          # mark checkpoint (complete message) 
+30          logger.debug("debug %s flushing..." % self.__name) 
+31          self.put(None) 
+32          # wait until it is processed 
+33          self.join() 
+34          logger.debug("debug %s flush done" % self.__name) 
+
    35   
+
    36 -    def read(self, count=None, timeout=None): 
+
    37          logger.debug("debug %s reading..." % (self.__name, )) 
+38          data = self.get(block=True, timeout=timeout) 
+39          # signal that we are ready 
+40          self.task_done() 
+41          logger.debug("debug %s read %s" % (self.__name, data)) 
+42          return data 
+
    43   
+
    44 -    def readline(self): 
+
    45          logger.debug("debug %s readline..." % (self.__name, )) 
+46          return self.read() 
+
    47   
+48   
+49  pipe_in = Pipe('in') 
+50  pipe_out = Pipe('out') 
+51   
+52  debugger = pdb.Pdb(completekey=None, stdin=pipe_in, stdout=pipe_out,) 
+53   
+
    54 -def set_trace(): 
+
    55      "breakpoint shortcut (like pdb)" 
+56      logger.info("DEBUG: set_trace!") 
+57      debugger.set_trace(sys._getframe().f_back) 
+
    58   
+59   
+
    60 -def stop_trace(): 
+
    61      "stop waiting for the debugger (called atexit)" 
+62      # this should prevent communicate is wait forever a command result 
+63      # and the main thread has finished 
+64      logger.info("DEBUG: stop_trace!") 
+65      pipe_out.write("debug finished!") 
+66      pipe_out.write(None) 
+
    67      #pipe_out.flush() 
+68   
+
    69 -def communicate(command=None): 
+
    70      "send command to debbuger, wait result" 
+71      if command is not None: 
+72          logger.info("DEBUG: sending command %s" % command) 
+73          pipe_in.write(command) 
+74          #pipe_in.flush() 
+75      result = [] 
+76      while True: 
+77          data = pipe_out.read() 
+78          if data is None: 
+79              break 
+80          result.append(data) 
+81      logger.info("DEBUG: result %s" % repr(result)) 
+82      return ''.join(result) 
+
    83   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:03 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.debug.Pipe-class.html
Index: applications/examples/static/epydoc/web2py.gluon.debug.Pipe-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.debug.Pipe-class.html
@@ -0,0 +1,297 @@
+
+
+
+
+  web2py.gluon.debug.Pipe
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module debug ::
+        Class Pipe
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Pipe
    source code

    
+
    +Queue.Queue --+
+              |
+             Pipe
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        name,
+        mode='r',
+        *args,
+        **kwargs)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    write(self,
+        data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    flush(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    read(self,
+        count=1,
+        timeout=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    readline(self)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Queue.Queue:
+      empty,
+      full,
+      get,
+      get_nowait,
+      join,
+      put,
+      put_nowait,
+      qsize,
+      task_done
+      
    
+    
        
    Inherited from Queue.Queue (private):
+      _empty,
+      _full,
+      _get,
+      _init,
+      _put,
+      _qsize
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        name,
+        mode='r',
+        *args,
+        **kwargs)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      Queue.Queue.__init__
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.decoder-module.html
Index: applications/examples/static/epydoc/web2py.gluon.decoder-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.decoder-module.html
@@ -0,0 +1,288 @@
+
+
+
+
+  web2py.gluon.decoder
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module decoder
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module decoder
    source code

    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    autoDetectXMLEncoding(buffer)
    
+      buffer -> encoding_name
+The buffer should be at least 4 bytes long.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    decoder(buffer)
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        autodetect_dict = {(0, 0, 254, 255): 'ucs4_be', (0, 60, 0, 63)...
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Function Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    autoDetectXMLEncoding(buffer)
+  
    
+      		source code 
+    
    
+  
+  
    +buffer -> encoding_name
+The buffer should be at least 4 bytes long.
+    Returns None if encoding cannot be detected.
+    Note that encoding_name might not have an installed
+    decoder (e.g. EBCDIC)
+
+
    
+  
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Variables Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    autodetect_dict
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{(0, 0, 254, 255): 'ucs4_be',
+ (0, 60, 0, 63): 'utf_16_be',
+ (60, 0, 63, 0): 'utf_16_le',
+ (60, 63, 120, 109): 'utf_8',
+ (76, 111, 167, 148): 'EBCDIC',
+ (254, 255, None, None): 'utf_16_be',
+ (255, 254, None, None): 'utf_16_le',
+ (255, 254, 0, 0): 'ucs4_le'}
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.decoder-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.decoder-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.decoder-pysrc.html
@@ -0,0 +1,197 @@
+
+
+
+
+  web2py.gluon.decoder
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module decoder
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.decoder
    
+
    + 1  import codecs, encodings 
+ 2   
+ 3  """Caller will hand this library a buffer and ask it to either convert 
+ 4  it or auto-detect the type. 
+ 5   
+ 6  Based on http://code.activestate.com/recipes/52257/ 
+ 7   
+ 8  Licensed under the PSF License 
+ 9  """ 
+10   
+11  # None represents a potentially variable byte. "##" in the XML spec... 
+12  autodetect_dict={ # bytepattern     : ("name", 
+13                  (0x00, 0x00, 0xFE, 0xFF) : ("ucs4_be"), 
+14                  (0xFF, 0xFE, 0x00, 0x00) : ("ucs4_le"), 
+15                  (0xFE, 0xFF, None, None) : ("utf_16_be"), 
+16                  (0xFF, 0xFE, None, None) : ("utf_16_le"), 
+17                  (0x00, 0x3C, 0x00, 0x3F) : ("utf_16_be"), 
+18                  (0x3C, 0x00, 0x3F, 0x00) : ("utf_16_le"), 
+19                  (0x3C, 0x3F, 0x78, 0x6D): ("utf_8"), 
+20                  (0x4C, 0x6F, 0xA7, 0x94): ("EBCDIC") 
+21                   } 
+22   
+
    23 -def autoDetectXMLEncoding(buffer): 
+
    24      """ buffer -> encoding_name 
+25      The buffer should be at least 4 bytes long. 
+26          Returns None if encoding cannot be detected. 
+27          Note that encoding_name might not have an installed 
+28          decoder (e.g. EBCDIC) 
+29      """ 
+30      # a more efficient implementation would not decode the whole 
+31      # buffer at once but otherwise we'd have to decode a character at 
+32      # a time looking for the quote character...that's a pain 
+33   
+34      encoding = "utf_8" # according to the XML spec, this is the default 
+35                            # this code successively tries to refine the default 
+36                            # whenever it fails to refine, it falls back to 
+37                            # the last place encoding was set. 
+38      if len(buffer)>=4: 
+39          bytes = (byte1, byte2, byte3, byte4) = tuple(map(ord, buffer[0:4])) 
+40          enc_info = autodetect_dict.get(bytes, None) 
+41          if not enc_info: # try autodetection again removing potentially 
+42              # variable bytes 
+43              bytes = (byte1, byte2, None, None) 
+44              enc_info = autodetect_dict.get(bytes) 
+45      else: 
+46          enc_info = None 
+47   
+48      if enc_info: 
+49          encoding = enc_info # we've got a guess... these are 
+50                              #the new defaults 
+51   
+52          # try to find a more precise encoding using xml declaration 
+53          secret_decoder_ring = codecs.lookup(encoding)[1] 
+54          (decoded,length) = secret_decoder_ring(buffer) 
+55          first_line = decoded.split("\n")[0] 
+56          if first_line and first_line.startswith(u"<?xml"): 
+57              encoding_pos = first_line.find(u"encoding") 
+58              if encoding_pos!=-1: 
+59                  # look for double quote 
+60                  quote_pos=first_line.find('"', encoding_pos) 
+61   
+62                  if quote_pos==-1:                 # look for single quote 
+63                      quote_pos=first_line.find("'", encoding_pos) 
+64   
+65                  if quote_pos>-1: 
+66                      quote_char,rest=(first_line[quote_pos], 
+67                                                  first_line[quote_pos+1:]) 
+68                      encoding=rest[:rest.find(quote_char)] 
+69   
+70      return encoding 
+
    71   
+
    72 -def decoder(buffer): 
+
    73      encoding = autoDetectXMLEncoding(buffer) 
+74      return buffer.decode(encoding).encode('utf8') 
+
    75   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:05 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.fileutils-module.html
Index: applications/examples/static/epydoc/web2py.gluon.fileutils-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.fileutils-module.html
@@ -0,0 +1,649 @@
+
+
+
+
+  web2py.gluon.fileutils
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module fileutils
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module fileutils
    source code

    
+This file is part of the web2py Web Framework Copyrighted by Massimo 
+  Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    read_file(filename,
+        mode='r')
    
+      returns content from filename, making sure to close the file 
+      explicitly on exit.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    write_file(filename,
+        value,
+        mode='w')
    
+      writes <value> to filename, making sure to close the file 
+      explicitly on exit.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    readlines_file(filename,
+        mode='r')
    
+      applies .split(' ') to the output of read_file()    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    abspath(*relpath,
+        **base)
    
+      convert relative path to absolute path based (by default) on 
+      applications_parent    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    mktree(path)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    listdir(path,
+        expression='^.+$',
+        drop=True,
+        add_dirs=True,
+        sort=True)
    
+      like os.listdir() but you can specify a regex pattern to filter 
+      files.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    recursive_unlink(f)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    cleanpath(path)
    
+      turns any expression/path into a valid filename.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _extractall(filename,
+        path='.',
+        members=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    tar(file,
+        dir,
+        expression='^.+$')
    
+      tars dir into file, only tars file that match expression    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    untar(file,
+        dir)
    
+      untar file into dir    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    w2p_pack(filename,
+        path,
+        compiled=True)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    w2p_unpack(filename,
+        path,
+        delete_tar=True)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    w2p_pack_plugin(filename,
+        path,
+        plugin_name)
    
+      Pack the given plugin into a w2p file.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    w2p_unpack_plugin(filename,
+        path,
+        delete_tar=True)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    tar_compiled(file,
+        dir,
+        expression='^.+$')
    
+      used to tar a compiled application.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    up(path)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    get_session(request,
+        other_application='admin')
    
+      checks that user is authorized to access other_application    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    check_credentials(request,
+        other_application='admin',
+        expiration=3600)
    
+      checks that user is authorized to access other_application    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    fix_newlines(path)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    copystream(src,
+        dest,
+        size,
+        chunk_size=100000)
    
+      this is here because I think there is a bug in 
+      shutil.copyfileobj    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    make_fake_file_like_object()
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Function Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    listdir(path,
+        expression='^.+$',
+        drop=True,
+        add_dirs=True,
+        sort=True)
+  
    
+      		source code 
+    
    
+  
+  like os.listdir() but you can specify a regex pattern to filter files.
+  if add_dirs is True, the returned items will have the full path.
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    cleanpath(path)
+  
    
+      		source code 
+    
    
+  
+  turns any expression/path into a valid filename. replaces / with _ and
+  removes special characters.
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    w2p_pack_plugin(filename,
+        path,
+        plugin_name)
+  
    
+      		source code 
+    
    
+  
+  
    +Pack the given plugin into a w2p file.
+Will match files at:
+    <path>/*/plugin_[name].*
+    <path>/*/plugin_[name]/*
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    tar_compiled(file,
+        dir,
+        expression='^.+$')
+  
    
+      		source code 
+    
    
+  
+  used to tar a compiled application. the content of models, views, 
+  controllers is not stored in the tar file.
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.fileutils-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.fileutils-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.fileutils-pysrc.html
@@ -0,0 +1,592 @@
+
+
+
+
+  web2py.gluon.fileutils
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module fileutils
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.fileutils
    
+
    +  1  #!/usr/bin/env python 
+  2  # -*- coding: utf-8 -*- 
+  3   
+  4  """ 
+  5  This file is part of the web2py Web Framework 
+  6  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+  7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+  8  """ 
+  9   
+ 10  import storage 
+ 11  import os 
+ 12  import re 
+ 13  import tarfile 
+ 14  import glob 
+ 15  import time 
+ 16  from http import HTTP 
+ 17  from gzip import open as gzopen 
+ 18  from settings import global_settings 
+ 19   
+ 20   
+ 21  __all__ = [ 
+ 22      'read_file', 
+ 23      'write_file', 
+ 24      'readlines_file', 
+ 25      'up', 
+ 26      'abspath', 
+ 27      'mktree', 
+ 28      'listdir', 
+ 29      'recursive_unlink', 
+ 30      'cleanpath', 
+ 31      'tar', 
+ 32      'untar', 
+ 33      'tar_compiled', 
+ 34      'get_session', 
+ 35      'check_credentials', 
+ 36      'w2p_pack', 
+ 37      'w2p_unpack', 
+ 38      'w2p_pack_plugin', 
+ 39      'w2p_unpack_plugin', 
+ 40      'fix_newlines', 
+ 41      'make_fake_file_like_object', 
+ 42      ] 
+ 43   
+
     44 -def read_file(filename, mode='r'): 
+
     45      "returns content from filename, making sure to close the file explicitly on exit." 
+ 46      f = open(filename, mode) 
+ 47      try: 
+ 48          return f.read() 
+ 49      finally: 
+ 50          f.close() 
+
     51   
+
     52 -def write_file(filename, value, mode='w'): 
+
     53      "writes <value> to filename, making sure to close the file explicitly on exit." 
+ 54      f = open(filename, mode) 
+ 55      try: 
+ 56          return f.write(value) 
+ 57      finally: 
+ 58          f.close() 
+
     59   
+
     60 -def readlines_file(filename, mode='r'): 
+
     61      "applies .split('\n') to the output of read_file()" 
+ 62      return read_file(filename, mode).split('\n') 
+
     63   
+
     64 -def abspath(*relpath, **base): 
+
     65      "convert relative path to absolute path based (by default) on applications_parent" 
+ 66      path = os.path.join(*relpath) 
+ 67      gluon = base.get('gluon', False) 
+ 68      if os.path.isabs(path): 
+ 69          return path 
+ 70      if gluon: 
+ 71          return os.path.join(global_settings.gluon_parent, path) 
+ 72      return os.path.join(global_settings.applications_parent, path) 
+
     73   
+ 74   
+
     75 -def mktree(path): 
+
     76      head,tail =os.path.split(path) 
+ 77      if head: 
+ 78          if tail: mktree(head) 
+ 79          if not os.path.exists(head): 
+ 80              os.mkdir(head) 
+
     81   
+
     82 -def listdir( 
+ 83      path, 
+ 84      expression='^.+$', 
+ 85      drop=True, 
+ 86      add_dirs=False, 
+ 87      sort=True, 
+ 88      ): 
+
     89      """ 
+ 90      like os.listdir() but you can specify a regex pattern to filter files. 
+ 91      if add_dirs is True, the returned items will have the full path. 
+ 92      """ 
+ 93      if path[-1:] != os.path.sep: 
+ 94          path = path + os.path.sep 
+ 95      if drop: 
+ 96          n = len(path) 
+ 97      else: 
+ 98          n = 0 
+ 99      regex = re.compile(expression) 
+100      items = [] 
+101      for (root, dirs, files) in os.walk(path, topdown=True): 
+102          for dir in dirs[:]: 
+103              if dir.startswith('.'): 
+104                  dirs.remove(dir) 
+105          if add_dirs: 
+106              items.append(root[n:]) 
+107          for file in sorted(files): 
+108              if regex.match(file) and not file.startswith('.'): 
+109                  items.append(os.path.join(root, file)[n:]) 
+110      if sort: 
+111          return sorted(items) 
+112      else: 
+113          return items 
+
    114   
+115   
+123   
+124   
+
    125 -def cleanpath(path): 
+
    126      """ 
+127      turns any expression/path into a valid filename. replaces / with _ and 
+128      removes special characters. 
+129      """ 
+130   
+131      items = path.split('.') 
+132      if len(items) > 1: 
+133          path = re.sub('[^\w\.]+', '_', '_'.join(items[:-1]) + '.' 
+134                         + ''.join(items[-1:])) 
+135      else: 
+136          path = re.sub('[^\w\.]+', '_', ''.join(items[-1:])) 
+137      return path 
+
    138   
+139   
+
    140 -def _extractall(filename, path='.', members=None): 
+
    141      if not hasattr(tarfile.TarFile, 'extractall'): 
+142          from tarfile import ExtractError 
+143   
+144          class TarFile(tarfile.TarFile): 
+145   
+146              def extractall(self, path='.', members=None): 
+147                  """Extract all members from the archive to the current working 
+148               directory and set owner, modification time and permissions on 
+149               directories afterwards. `path' specifies a different directory 
+150               to extract to. `members' is optional and must be a subset of the 
+151               list returned by getmembers(). 
+152                  """ 
+153   
+154                  directories = [] 
+155                  if members is None: 
+156                      members = self 
+157                  for tarinfo in members: 
+158                      if tarinfo.isdir(): 
+159   
+160                          # Extract directory with a safe mode, so that 
+161                          # all files below can be extracted as well. 
+162   
+163                          try: 
+164                              os.makedirs(os.path.join(path, 
+165                                      tarinfo.name), 0777) 
+166                          except EnvironmentError: 
+167                              pass 
+168                          directories.append(tarinfo) 
+169                      else: 
+170                          self.extract(tarinfo, path) 
+171   
+172                  # Reverse sort directories. 
+173   
+174                  directories.sort(lambda a, b: cmp(a.name, b.name)) 
+175                  directories.reverse() 
+176   
+177                  # Set correct owner, mtime and filemode on directories. 
+178   
+179                  for tarinfo in directories: 
+180                      path = os.path.join(path, tarinfo.name) 
+181                      try: 
+182                          self.chown(tarinfo, path) 
+183                          self.utime(tarinfo, path) 
+184                          self.chmod(tarinfo, path) 
+185                      except ExtractError, e: 
+186                          if self.errorlevel > 1: 
+187                              raise 
+188                          else: 
+189                              self._dbg(1, 'tarfile: %s' % e) 
+
    190   
+191   
+192          _cls = TarFile 
+193      else: 
+194          _cls = tarfile.TarFile 
+195   
+196      tar = _cls(filename, 'r') 
+197      ret = tar.extractall(path, members) 
+198      tar.close() 
+199      return ret 
+200   
+
    201 -def tar(file, dir, expression='^.+$'): 
+
    202      """ 
+203      tars dir into file, only tars file that match expression 
+204      """ 
+205   
+206      tar = tarfile.TarFile(file, 'w') 
+207      try: 
+208          for file in listdir(dir, expression, add_dirs=True): 
+209              tar.add(os.path.join(dir, file), file, False) 
+210      finally: 
+211          tar.close() 
+
    212   
+
    213 -def untar(file, dir): 
+
    214      """ 
+215      untar file into dir 
+216      """ 
+217   
+218      _extractall(file, dir) 
+
    219   
+220   
+
    221 -def w2p_pack(filename, path, compiled=False): 
+
    222      filename = abspath(filename) 
+223      path = abspath(path) 
+224      tarname = filename + '.tar' 
+225      if compiled: 
+226          tar_compiled(tarname, path, '^[\w\.\-]+$') 
+227      else: 
+228          tar(tarname, path, '^[\w\.\-]+$') 
+229      w2pfp = gzopen(filename, 'wb') 
+230      tarfp = open(tarname, 'rb') 
+231      w2pfp.write(tarfp.read()) 
+232      w2pfp.close() 
+233      tarfp.close() 
+234      os.unlink(tarname) 
+
    235   
+
    236 -def w2p_unpack(filename, path, delete_tar=True): 
+
    237      filename = abspath(filename) 
+238      path = abspath(path) 
+239      if filename[-4:] == '.w2p' or filename[-3:] == '.gz': 
+240          if filename[-4:] == '.w2p': 
+241              tarname = filename[:-4] + '.tar' 
+242          else: 
+243              tarname = filename[:-3] + '.tar' 
+244          fgzipped = gzopen(filename, 'rb') 
+245          tarfile = open(tarname, 'wb') 
+246          tarfile.write(fgzipped.read()) 
+247          tarfile.close() 
+248          fgzipped.close() 
+249      else: 
+250          tarname = filename 
+251      untar(tarname, path) 
+252      if delete_tar: 
+253          os.unlink(tarname) 
+
    254   
+255   
+
    256 -def w2p_pack_plugin(filename, path, plugin_name): 
+
    257      """Pack the given plugin into a w2p file. 
+258      Will match files at: 
+259          <path>/*/plugin_[name].* 
+260          <path>/*/plugin_[name]/* 
+261      """ 
+262      filename = abspath(filename) 
+263      path = abspath(path) 
+264      if not filename.endswith('web2py.plugin.%s.w2p' % plugin_name): 
+265          raise Exception, "Not a web2py plugin name" 
+266      plugin_tarball = tarfile.open(filename, 'w:gz') 
+267      try: 
+268          app_dir = path 
+269          while app_dir[-1]=='/': 
+270              app_dir = app_dir[:-1] 
+271          files1=glob.glob(os.path.join(app_dir,'*/plugin_%s.*' % plugin_name)) 
+272          files2=glob.glob(os.path.join(app_dir,'*/plugin_%s/*' % plugin_name)) 
+273          for file in files1+files2: 
+274              plugin_tarball.add(file, arcname=file[len(app_dir)+1:]) 
+275      finally: 
+276          plugin_tarball.close() 
+
    277   
+278   
+
    279 -def w2p_unpack_plugin(filename, path, delete_tar=True): 
+
    280      filename = abspath(filename) 
+281      path = abspath(path) 
+282      if not os.path.basename(filename).startswith('web2py.plugin.'): 
+283          raise Exception, "Not a web2py plugin" 
+284      w2p_unpack(filename,path,delete_tar) 
+
    285   
+286   
+
    287 -def tar_compiled(file, dir, expression='^.+$'): 
+
    288      """ 
+289      used to tar a compiled application. 
+290      the content of models, views, controllers is not stored in the tar file. 
+291      """ 
+292   
+293      tar = tarfile.TarFile(file, 'w') 
+294      for file in listdir(dir, expression, add_dirs=True): 
+295          filename = os.path.join(dir, file) 
+296          if os.path.islink(filename): 
+297              continue 
+298          if os.path.isfile(filename) and file[-4:] != '.pyc': 
+299              if file[:6] == 'models': 
+300                  continue 
+301              if file[:5] == 'views': 
+302                  continue 
+303              if file[:11] == 'controllers': 
+304                  continue 
+305              if file[:7] == 'modules': 
+306                  continue 
+307          tar.add(filename, file, False) 
+308      tar.close() 
+
    309   
+
    310 -def up(path): 
+
    311      return os.path.dirname(os.path.normpath(path)) 
+
    312   
+313   
+
    314 -def get_session(request, other_application='admin'): 
+
    315      """ checks that user is authorized to access other_application""" 
+316      if request.application == other_application: 
+317          raise KeyError 
+318      try: 
+319          session_id = request.cookies['session_id_' + other_application].value 
+320          osession = storage.load_storage(os.path.join( 
+321                  up(request.folder), other_application, 'sessions', session_id)) 
+322      except: 
+323          osession = storage.Storage() 
+324      return osession 
+
    325   
+326   
+
    327 -def check_credentials(request, other_application='admin', expiration = 60*60): 
+
    328      """ checks that user is authorized to access other_application""" 
+329      if request.env.web2py_runtime_gae: 
+330          from google.appengine.api import users 
+331          if users.is_current_user_admin(): 
+332              return True 
+333          else: 
+334              login_html = '<a href="%s">Sign in with your google account</a>.' \ 
+335                  % users.create_login_url(request.env.path_info) 
+336              raise HTTP(200, '<html><body>%s</body></html>' % login_html) 
+337      else: 
+338          dt = time.time() - expiration 
+339          s = get_session(request, other_application) 
+340          return (s.authorized and s.last_time and s.last_time > dt) 
+
    341   
+342   
+
    343 -def fix_newlines(path): 
+
    344      regex = re.compile(r'''(\r 
+345  |\r| 
+346  )''') 
+347      for filename in listdir(path, '.*\.(py|html)$', drop=False): 
+348          rdata = read_file(filename, 'rb') 
+349          wdata = regex.sub('\n', rdata) 
+350          if wdata != rdata: 
+351              write_file(filename, wdata, 'wb') 
+
    352   
+
    353 -def copystream( 
+354      src, 
+355      dest, 
+356      size, 
+357      chunk_size=10 ** 5, 
+358      ): 
+
    359      """ 
+360      this is here because I think there is a bug in shutil.copyfileobj 
+361      """ 
+362      while size > 0: 
+363          if size < chunk_size: 
+364              data = src.read(size) 
+365          else: 
+366              data = src.read(chunk_size) 
+367          length = len(data) 
+368          if length > size: 
+369              (data, length) = (data[:size], size) 
+370          size -= length 
+371          if length == 0: 
+372              break 
+373          dest.write(data) 
+374          if length < chunk_size: 
+375              break 
+376      dest.seek(0) 
+377      return 
+
    378   
+379   
+
    381      class LogFile(object): 
+382          def write(self, value): 
+383              pass 
+
    384          def close(self): 
+385              pass 
+386      return LogFile() 
+387   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:04 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.globals-module.html
Index: applications/examples/static/epydoc/web2py.gluon.globals-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.globals-module.html
@@ -0,0 +1,206 @@
+
+
+
+
+  web2py.gluon.globals
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module globals
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module globals
    source code

    
+
    +
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+Contains the classes for the global used variables:
+
+- Request
+- Response
+- Session
+
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        Request
    
+      defines the request object and the default values of its members...
+    
    
+       
+    
+        Response
    
+      defines the response object and the default values of its 
+        members response.write(   ) can be used to write in the output 
+        html
+    
    
+       
+    
+        Session
    
+      defines the session object and the default values of its members
+        (None)
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        regex_session_id = re.compile(r'^([\w-]+/)?[\w-\.]+$')
+    
    
+       
+    
+        current = threading.local()
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.globals-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.globals-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.globals-pysrc.html
@@ -0,0 +1,768 @@
+
+
+
+
+  web2py.gluon.globals
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module globals
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.globals
    
+
    +  1  #!/usr/bin/env python 
+  2  # -*- coding: utf-8 -*- 
+  3   
+  4  """ 
+  5  This file is part of the web2py Web Framework 
+  6  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+  7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+  8   
+  9  Contains the classes for the global used variables: 
+ 10   
+ 11  - Request 
+ 12  - Response 
+ 13  - Session 
+ 14   
+ 15  """ 
+ 16   
+ 17  from storage import Storage, List 
+ 18  from streamer import streamer, stream_file_or_304_or_206, DEFAULT_CHUNK_SIZE 
+ 19  from xmlrpc import handler 
+ 20  from contenttype import contenttype 
+ 21  from html import xmlescape, TABLE, TR, PRE 
+ 22  from http import HTTP 
+ 23  from fileutils import up 
+ 24  from serializers import json, custom_json 
+ 25  import settings 
+ 26  from utils import web2py_uuid 
+ 27  from settings import global_settings 
+ 28   
+ 29  import hashlib 
+ 30  import portalocker 
+ 31  import cPickle 
+ 32  import cStringIO 
+ 33  import datetime 
+ 34  import re 
+ 35  import Cookie 
+ 36  import os 
+ 37  import sys 
+ 38  import traceback 
+ 39  import threading 
+ 40   
+ 41  regex_session_id = re.compile('^([\w\-]+/)?[\w\-\.]+$') 
+ 42   
+ 43  __all__ = ['Request', 'Response', 'Session'] 
+ 44   
+ 45  current = threading.local()  # thread-local storage for request-scope globals 
+ 46   
+
     47 -class Request(Storage): 
+
     48   
+ 49      """ 
+ 50      defines the request object and the default values of its members 
+ 51   
+ 52      - env: environment variables, by gluon.main.wsgibase() 
+ 53      - cookies 
+ 54      - get_vars 
+ 55      - post_vars 
+ 56      - vars 
+ 57      - folder 
+ 58      - application 
+ 59      - function 
+ 60      - args 
+ 61      - extension 
+ 62      - now: datetime.datetime.today() 
+ 63      - restful() 
+ 64      """ 
+ 65   
+
     66 -    def __init__(self): 
+
     67          self.wsgi = Storage() # hooks to environ and start_response 
+ 68          self.env = Storage() 
+ 69          self.cookies = Cookie.SimpleCookie() 
+ 70          self.get_vars = Storage() 
+ 71          self.post_vars = Storage() 
+ 72          self.vars = Storage() 
+ 73          self.folder = None 
+ 74          self.application = None 
+ 75          self.function = None 
+ 76          self.args = List() 
+ 77          self.extension = None 
+ 78          self.now = datetime.datetime.now() 
+ 79          self.is_restful = False 
+ 80          self.is_https = False 
+ 81          self.is_local = False 
+
     82   
+
     83 -    def compute_uuid(self): 
+
     84          self.uuid = '%s/%s.%s.%s' % ( 
+ 85              self.application, 
+ 86              self.client.replace(':', '_'), 
+ 87              self.now.strftime('%Y-%m-%d.%H-%M-%S'), 
+ 88              web2py_uuid()) 
+ 89          return self.uuid 
+
     90   
+
     91 -    def user_agent(self): 
+
     92          from gluon.contrib import user_agent_parser 
+ 93          session = current.session 
+ 94          session._user_agent = session._user_agent or \ 
+ 95              user_agent_parser.detect(self.env.http_user_agent) 
+ 96          return session._user_agent 
+
     97   
+
     98 -    def restful(self): 
+
     99          def wrapper(action,self=self): 
+100              def f(_action=action,_self=self,*a,**b): 
+101                  self.is_restful = True 
+102                  method = _self.env.request_method 
+103                  if len(_self.args) and '.' in _self.args[-1]: 
+104                      _self.args[-1],_self.extension = _self.args[-1].rsplit('.',1) 
+105                  if not method in ['GET','POST','DELETE','PUT']: 
+106                      raise HTTP(400,"invalid method") 
+107                  rest_action = _action().get(method,None) 
+108                  if not rest_action: 
+109                      raise HTTP(400,"method not supported") 
+110                  try: 
+111                      return rest_action(*_self.args,**_self.vars) 
+112                  except TypeError, e: 
+113                      exc_type, exc_value, exc_traceback = sys.exc_info() 
+114                      if len(traceback.extract_tb(exc_traceback))==1: 
+115                          raise HTTP(400,"invalid arguments") 
+116                      else: 
+117                          raise e 
+
    118              f.__doc__ = action.__doc__ 
+119              f.__name__ = action.__name__ 
+120              return f 
+
    121          return wrapper 
+122   
+123   
+
    124 -class Response(Storage): 
+
    125   
+126      """ 
+127      defines the response object and the default values of its members 
+128      response.write(   ) can be used to write in the output html 
+129      """ 
+130   
+
    131 -    def __init__(self): 
+
    132          self.status = 200 
+133          self.headers = Storage() 
+134          self.headers['X-Powered-By'] = 'web2py' 
+135          self.body = cStringIO.StringIO() 
+136          self.session_id = None 
+137          self.cookies = Cookie.SimpleCookie() 
+138          self.postprocessing = [] 
+139          self.flash = ''            # used by the default view layout 
+140          self.meta = Storage()      # used by web2py_ajax.html 
+141          self.menu = []             # used by the default view layout 
+142          self.files = []            # used by web2py_ajax.html 
+143          self.generic_patterns = [] # patterns to allow generic views 
+144          self._vars = None 
+145          self._caller = lambda f: f() 
+146          self._view_environment = None 
+147          self._custom_commit = None 
+148          self._custom_rollback = None 
+
    149   
+
    150 -    def write(self, data, escape=True): 
+
    151          if not escape: 
+152              self.body.write(str(data)) 
+153          else: 
+154              self.body.write(xmlescape(data)) 
+
    155   
+
    156 -    def render(self, *a, **b): 
+
    157          from compileapp import run_view_in 
+158          if len(a) > 2: 
+159              raise SyntaxError, 'Response.render can be called with two arguments, at most' 
+160          elif len(a) == 2: 
+161              (view, self._vars) = (a[0], a[1]) 
+162          elif len(a) == 1 and isinstance(a[0], str): 
+163              (view, self._vars) = (a[0], {}) 
+164          elif len(a) == 1 and hasattr(a[0], 'read') and callable(a[0].read): 
+165              (view, self._vars) = (a[0], {}) 
+166          elif len(a) == 1 and isinstance(a[0], dict): 
+167              (view, self._vars) = (None, a[0]) 
+168          else: 
+169              (view, self._vars) = (None, {}) 
+170          self._vars.update(b) 
+171          self._view_environment.update(self._vars) 
+172          if view: 
+173              import cStringIO 
+174              (obody, oview) = (self.body, self.view) 
+175              (self.body, self.view) = (cStringIO.StringIO(), view) 
+176              run_view_in(self._view_environment) 
+177              page = self.body.getvalue() 
+178              self.body.close() 
+179              (self.body, self.view) = (obody, oview) 
+180          else: 
+181              run_view_in(self._view_environment) 
+182              page = self.body.getvalue() 
+183          return page 
+
    184   
+
    185 -    def stream( 
+186          self, 
+187          stream, 
+188          chunk_size = DEFAULT_CHUNK_SIZE, 
+189          request=None, 
+190          ): 
+
    191          """ 
+192          if a controller function:: 
+193   
+194              return response.stream(file, 100) 
+195   
+196          the file content will be streamed at 100 bytes at the time 
+197          """ 
+198   
+199          if isinstance(stream, (str, unicode)): 
+200              stream_file_or_304_or_206(stream, 
+201                                        chunk_size=chunk_size, 
+202                                        request=request, 
+203                                        headers=self.headers) 
+204   
+205          # ## the following is for backward compatibility 
+206   
+207          if hasattr(stream, 'name'): 
+208              filename = stream.name 
+209          else: 
+210              filename = None 
+211          keys = [item.lower() for item in self.headers] 
+212          if filename and not 'content-type' in keys: 
+213              self.headers['Content-Type'] = contenttype(filename) 
+214          if filename and not 'content-length' in keys: 
+215              try: 
+216                  self.headers['Content-Length'] = \ 
+217                      os.path.getsize(filename) 
+218              except OSError: 
+219                  pass 
+220          if request and request.env.web2py_use_wsgi_file_wrapper: 
+221              wrapped = request.env.wsgi_file_wrapper(stream, chunk_size) 
+222          else: 
+223              wrapped = streamer(stream, chunk_size=chunk_size) 
+224          return wrapped 
+
    225   
+
    226 -    def download(self, request, db, chunk_size = DEFAULT_CHUNK_SIZE, attachment=True): 
+
    227          """ 
+228          example of usage in controller:: 
+229   
+230              def download(): 
+231                  return response.download(request, db) 
+232   
+233          downloads from http://..../download/filename 
+234          """ 
+235   
+236          import contenttype as c 
+237          if not request.args: 
+238              raise HTTP(404) 
+239          name = request.args[-1] 
+240          items = re.compile('(?P<table>.*?)\.(?P<field>.*?)\..*')\ 
+241                             .match(name) 
+242          if not items: 
+243              raise HTTP(404) 
+244          (t, f) = (items.group('table'), items.group('field')) 
+245          field = db[t][f] 
+246          try: 
+247              (filename, stream) = field.retrieve(name) 
+248          except IOError: 
+249              raise HTTP(404) 
+250          self.headers['Content-Type'] = c.contenttype(name) 
+251          if attachment: 
+252              self.headers['Content-Disposition'] = \ 
+253                  "attachment; filename=%s" % filename 
+254          return self.stream(stream, chunk_size = chunk_size, request=request) 
+
    255   
+
    256 -    def json(self, data, default=None): 
+
    257          return json(data, default = default or custom_json) 
+
    258   
+
    259 -    def xmlrpc(self, request, methods): 
+
    260          """ 
+261          assuming:: 
+262   
+263              def add(a, b): 
+264                  return a+b 
+265   
+266          if a controller function \"func\":: 
+267   
+268              return response.xmlrpc(request, [add]) 
+269   
+270          the controller will be able to handle xmlrpc requests for 
+271          the add function. Example:: 
+272   
+273              import xmlrpclib 
+274              connection = xmlrpclib.ServerProxy('http://hostname/app/contr/func') 
+275              print connection.add(3, 4) 
+276   
+277          """ 
+278   
+279          return handler(request, self, methods) 
+
    280   
+
    281 -    def toolbar(self): 
+
    282          from html import DIV, SCRIPT, BEAUTIFY, TAG, URL 
+283          BUTTON = TAG.button 
+284          admin = URL("admin","default","design", 
+285                      args=current.request.application) 
+286          from gluon.dal import thread 
+287          dbstats = [TABLE(*[TR(PRE(row[0]),'%.2fms' % (row[1]*1000)) \ 
+288                                 for row in i.db._timings]) \ 
+289                         for i in thread.instances]         
+290          u = web2py_uuid()  
+291          return DIV( 
+292              BUTTON('design',_onclick="document.location='%s'" % admin), 
+293              BUTTON('request',_onclick="jQuery('#request-%s').slideToggle()"%u), 
+294              DIV(BEAUTIFY(current.request),_class="hidden",_id="request-%s"%u), 
+295              BUTTON('session',_onclick="jQuery('#session-%s').slideToggle()"%u), 
+296              DIV(BEAUTIFY(current.session),_class="hidden",_id="session-%s"%u), 
+297              BUTTON('response',_onclick="jQuery('#response-%s').slideToggle()"%u), 
+298              DIV(BEAUTIFY(current.response),_class="hidden",_id="response-%s"%u), 
+299              BUTTON('db stats',_onclick="jQuery('#db-stats-%s').slideToggle()"%u), 
+300              DIV(BEAUTIFY(dbstats),_class="hidden",_id="db-stats-%s"%u), 
+301              SCRIPT("jQuery('.hidden').hide()") 
+302              ) 
+
    303   
+
    304 -class Session(Storage): 
+
    305   
+306      """ 
+307      defines the session object and the default values of its members (None) 
+308      """ 
+309   
+
    310 -    def connect( 
+311          self, 
+312          request, 
+313          response, 
+314          db=None, 
+315          tablename='web2py_session', 
+316          masterapp=None, 
+317          migrate=True, 
+318          separate = None, 
+319          check_client=False, 
+320          ): 
+
    321          """ 
+322          separate can be separate=lambda(session_name): session_name[-2:] 
+323          and it is used to determine a session prefix. 
+324          separate can be True and it is set to session_name[-2:] 
+325          """ 
+326          if separate == True: 
+327              separate = lambda session_name: session_name[-2:] 
+328          self._unlock(response) 
+329          if not masterapp: 
+330              masterapp = request.application 
+331          response.session_id_name = 'session_id_%s' % masterapp.lower() 
+332   
+333          if not db: 
+334              if global_settings.db_sessions is True or masterapp in global_settings.db_sessions: 
+335                  return 
+336              response.session_new = False 
+337              client = request.client.replace(':', '.') 
+338              if response.session_id_name in request.cookies: 
+339                  response.session_id = \ 
+340                      request.cookies[response.session_id_name].value 
+341                  if regex_session_id.match(response.session_id): 
+342                      response.session_filename = \ 
+343                          os.path.join(up(request.folder), masterapp, 
+344                              'sessions', response.session_id) 
+345                  else: 
+346                      response.session_id = None 
+347              if response.session_id: 
+348                  try: 
+349                      response.session_file = \ 
+350                          open(response.session_filename, 'rb+') 
+351                      try: 
+352                          portalocker.lock(response.session_file, 
+353                                  portalocker.LOCK_EX) 
+354                          response.session_locked = True 
+355                          self.update(cPickle.load(response.session_file)) 
+356                          response.session_file.seek(0) 
+357                          oc = response.session_filename.split('/')[-1].split('-')[0] 
+358                          if check_client and client!=oc: 
+359                              raise Exception, "cookie attack" 
+360                      finally: 
+361                          pass 
+362                          #This causes admin login to break. Must find out why. 
+363                          #self._close(response) 
+364                  except: 
+365                      response.session_id = None 
+366              if not response.session_id: 
+367                  uuid = web2py_uuid() 
+368                  response.session_id = '%s-%s' % (client, uuid) 
+369                  if separate: 
+370                      prefix = separate(response.session_id) 
+371                      response.session_id = '%s/%s' % (prefix,response.session_id) 
+372                  response.session_filename = \ 
+373                      os.path.join(up(request.folder), masterapp, 
+374                                   'sessions', response.session_id) 
+375                  response.session_new = True 
+376          else: 
+377              if global_settings.db_sessions is not True: 
+378                  global_settings.db_sessions.add(masterapp) 
+379              response.session_db = True 
+380              if response.session_file: 
+381                  self._close(response) 
+382              if settings.global_settings.web2py_runtime_gae: 
+383                  # in principle this could work without GAE 
+384                  request.tickets_db = db 
+385              if masterapp == request.application: 
+386                  table_migrate = migrate 
+387              else: 
+388                  table_migrate = False 
+389              tname = tablename + '_' + masterapp 
+390              table = db.get(tname, None) 
+391              if table is None: 
+392                  table = db.define_table( 
+393                      tname, 
+394                      db.Field('locked', 'boolean', default=False), 
+395                      db.Field('client_ip', length=64), 
+396                      db.Field('created_datetime', 'datetime', 
+397                               default=request.now), 
+398                      db.Field('modified_datetime', 'datetime'), 
+399                      db.Field('unique_key', length=64), 
+400                      db.Field('session_data', 'blob'), 
+401                      migrate=table_migrate, 
+402                      ) 
+403              try: 
+404                  key = request.cookies[response.session_id_name].value 
+405                  (record_id, unique_key) = key.split(':') 
+406                  if record_id == '0': 
+407                      raise Exception, 'record_id == 0' 
+408                  rows = db(table.id == record_id).select() 
+409                  if len(rows) == 0 or rows[0].unique_key != unique_key: 
+410                      raise Exception, 'No record' 
+411   
+412                   # rows[0].update_record(locked=True) 
+413   
+414                  session_data = cPickle.loads(rows[0].session_data) 
+415                  self.update(session_data) 
+416              except Exception: 
+417                  record_id = None 
+418                  unique_key = web2py_uuid() 
+419                  session_data = {} 
+420              response._dbtable_and_field = \ 
+421                  (response.session_id_name, table, record_id, unique_key) 
+422              response.session_id = '%s:%s' % (record_id, unique_key) 
+423          response.cookies[response.session_id_name] = response.session_id 
+424          response.cookies[response.session_id_name]['path'] = '/' 
+425          self.__hash = hashlib.md5(str(self)).digest() 
+426          if self.flash: 
+427              (response.flash, self.flash) = (self.flash, None) 
+
    428   
+
    429 -    def is_new(self): 
+
    430          if self._start_timestamp: 
+431              return False 
+432          else: 
+433              self._start_timestamp = datetime.datetime.today() 
+434              return True 
+
    435   
+
    436 -    def is_expired(self, seconds = 3600): 
+
    437          now = datetime.datetime.today() 
+438          if not self._last_timestamp or \ 
+439                  self._last_timestamp + datetime.timedelta(seconds = seconds) > now: 
+440              self._last_timestamp = now 
+441              return False 
+442          else: 
+443              return True 
+
    444   
+
    445 -    def secure(self): 
+
    446          self._secure = True 
+
    447   
+
    448 -    def forget(self, response=None): 
+
    449          self._close(response) 
+450          self._forget = True 
+
    451   
+
    452 -    def _try_store_in_db(self, request, response): 
+
    453   
+454          # don't save if file-based sessions, no session id, or session being forgotten 
+455          if not response.session_db or not response.session_id or self._forget: 
+456              return 
+457   
+458          # don't save if no change to session 
+459          __hash = self.__hash 
+460          if __hash is not None: 
+461              del self.__hash 
+462              if __hash == hashlib.md5(str(self)).digest(): 
+463                  return 
+464   
+465          (record_id_name, table, record_id, unique_key) = \ 
+466              response._dbtable_and_field 
+467          dd = dict(locked=False, client_ip=request.env.remote_addr, 
+468                    modified_datetime=request.now, 
+469                    session_data=cPickle.dumps(dict(self)), 
+470                    unique_key=unique_key) 
+471          if record_id: 
+472              table._db(table.id == record_id).update(**dd) 
+473          else: 
+474              record_id = table.insert(**dd) 
+475          response.cookies[response.session_id_name] = '%s:%s'\ 
+476               % (record_id, unique_key) 
+477          response.cookies[response.session_id_name]['path'] = '/' 
+
    478   
+
    479 -    def _try_store_on_disk(self, request, response): 
+
    480   
+481          # don't save if sessions not not file-based 
+482          if response.session_db: 
+483              return 
+484   
+485          # don't save if no change to session 
+486          __hash = self.__hash 
+487          if __hash is not None: 
+488              del self.__hash 
+489              if __hash == hashlib.md5(str(self)).digest(): 
+490                  self._close(response) 
+491                  return 
+492   
+493          if not response.session_id or self._forget: 
+494              self._close(response) 
+495              return 
+496   
+497          if response.session_new: 
+498              # Tests if the session sub-folder exists, if not, create it 
+499              session_folder = os.path.dirname(response.session_filename) 
+500              if not os.path.exists(session_folder): 
+501                  os.mkdir(session_folder) 
+502              response.session_file = open(response.session_filename, 'wb') 
+503              portalocker.lock(response.session_file, portalocker.LOCK_EX) 
+504              response.session_locked = True 
+505   
+506          if response.session_file: 
+507              cPickle.dump(dict(self), response.session_file) 
+508              response.session_file.truncate() 
+509              self._close(response) 
+
    510   
+
    511 -    def _unlock(self, response): 
+
    512          if response and response.session_file and response.session_locked: 
+513              try: 
+514                  portalocker.unlock(response.session_file) 
+515                  response.session_locked = False 
+516              except: ### this should never happen but happens in Windows 
+517                  pass 
+
    518   
+
    519 -    def _close(self, response): 
+
    520          if response and response.session_file: 
+521              self._unlock(response) 
+522              try: 
+523                  response.session_file.close() 
+524                  del response.session_file 
+525              except: 
+526                  pass 
+
    527   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.globals.Request-class.html
Index: applications/examples/static/epydoc/web2py.gluon.globals.Request-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.globals.Request-class.html
@@ -0,0 +1,357 @@
+
+
+
+
+  web2py.gluon.globals.Request
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module globals ::
+        Class Request
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Request
    source code

    
+
    + object --+        
+          |        
+       dict --+    
+              |    
+storage.Storage --+
+                  |
+                 Request
+
    
+
+
    
+
    +
+defines the request object and the default values of its members
+
+- env: environment variables, by gluon.main.wsgibase()
+- cookies
+- get_vars
+- post_vars
+- vars
+- folder
+- application
+- function
+- args
+- extension
+- now: datetime.datetime.today()
+- restful()
+
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    compute_uuid(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    user_agent(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    restful(self)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from storage.Storage:
+      __delattr__,
+      __getattr__,
+      __getstate__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      getfirst,
+      getlast,
+      getlist
+      
    
+    
    Inherited from dict:
+      __cmp__,
+      __contains__,
+      __delitem__,
+      __eq__,
+      __ge__,
+      __getattribute__,
+      __getitem__,
+      __gt__,
+      __hash__,
+      __iter__,
+      __le__,
+      __len__,
+      __lt__,
+      __ne__,
+      __new__,
+      __setitem__,
+      clear,
+      copy,
+      fromkeys,
+      get,
+      has_key,
+      items,
+      iteritems,
+      iterkeys,
+      itervalues,
+      keys,
+      pop,
+      popitem,
+      setdefault,
+      update,
+      values
+      
    
+    
    Inherited from object:
+      __reduce__,
+      __reduce_ex__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Returns:
    
+        
    +new empty dictionary
+
+
    
+    
    Overrides:
+      dict.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.globals.Response-class.html
Index: applications/examples/static/epydoc/web2py.gluon.globals.Response-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.globals.Response-class.html
@@ -0,0 +1,513 @@
+
+
+
+
+  web2py.gluon.globals.Response
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module globals ::
+        Class Response
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Response
    source code

    
+
    + object --+        
+          |        
+       dict --+    
+              |    
+storage.Storage --+
+                  |
+                 Response
+
    
+
+
    
+defines the response object and the default values of its members 
+  response.write(   ) can be used to write in the output html

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    write(self,
+        data,
+        escape=True)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    render(self,
+        *a,
+        **b)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    stream(self,
+        stream,
+        chunk_size=65536,
+        request=1)
    
+      if a controller function:    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    download(self,
+        request,
+        db,
+        chunk_size=65536,
+        attachment=True)
    
+      example of usage in controller:    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    json(self,
+        data,
+        default=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    xmlrpc(self,
+        request,
+        methods)
    
+      assuming:    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    toolbar(self)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from storage.Storage:
+      __delattr__,
+      __getattr__,
+      __getstate__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      getfirst,
+      getlast,
+      getlist
+      
    
+    
    Inherited from dict:
+      __cmp__,
+      __contains__,
+      __delitem__,
+      __eq__,
+      __ge__,
+      __getattribute__,
+      __getitem__,
+      __gt__,
+      __hash__,
+      __iter__,
+      __le__,
+      __len__,
+      __lt__,
+      __ne__,
+      __new__,
+      __setitem__,
+      clear,
+      copy,
+      fromkeys,
+      get,
+      has_key,
+      items,
+      iteritems,
+      iterkeys,
+      itervalues,
+      keys,
+      pop,
+      popitem,
+      setdefault,
+      update,
+      values
+      
    
+    
    Inherited from object:
+      __reduce__,
+      __reduce_ex__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Returns:
    
+        
    +new empty dictionary
+
+
    
+    
    Overrides:
+      dict.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    stream(self,
+        stream,
+        chunk_size=65536,
+        request=1)
+  
    
+      		source code 
+    
    
+  
+  if a controller function:
+
    +   return response.stream(file, 100)
+
    
+  the file content will be streamed at 100 bytes at the time
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    download(self,
+        request,
+        db,
+        chunk_size=65536,
+        attachment=True)
+  
    
+      		source code 
+    
    
+  
+  example of usage in controller:
+
    +   def download():
+       return response.download(request, db)
+
    
+  downloads from http://..../download/filename
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    xmlrpc(self,
+        request,
+        methods)
+  
    
+      		source code 
+    
    
+  
+  assuming:
+
    +   def add(a, b):
+       return a+b
+
    
+  if a controller function "func":
+
    +   return response.xmlrpc(request, [add])
+
    
+  the controller will be able to handle xmlrpc requests for the add 
+  function. Example:
+
    +   import xmlrpclib
+   connection = xmlrpclib.ServerProxy('http://hostname/app/contr/func')
+   print connection.add(3, 4)
+
    
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.globals.Session-class.html
Index: applications/examples/static/epydoc/web2py.gluon.globals.Session-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.globals.Session-class.html
@@ -0,0 +1,437 @@
+
+
+
+
+  web2py.gluon.globals.Session
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module globals ::
+        Class Session
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Session
    source code

    
+
    + object --+        
+          |        
+       dict --+    
+              |    
+storage.Storage --+
+                  |
+                 Session
+
    
+
+
    
+defines the session object and the default values of its members 
+  (None)

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    connect(self,
+        request,
+        response,
+        db=1,
+        tablename='web2py_session',
+        masterapp=1,
+        migrate=True,
+        separate=1,
+        check_client=True)
    
+      separate can be separate=lambda(session_name): session_name[-2:] 
+      and it is used to determine a session prefix.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    is_new(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    is_expired(self,
+        seconds=3600)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    secure(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    forget(self,
+        response=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _try_store_in_db(self,
+        request,
+        response)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _try_store_on_disk(self,
+        request,
+        response)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _unlock(self,
+        response)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _close(self,
+        response)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from storage.Storage:
+      __delattr__,
+      __getattr__,
+      __getstate__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      getfirst,
+      getlast,
+      getlist
+      
    
+    
    Inherited from dict:
+      __cmp__,
+      __contains__,
+      __delitem__,
+      __eq__,
+      __ge__,
+      __getattribute__,
+      __getitem__,
+      __gt__,
+      __hash__,
+      __init__,
+      __iter__,
+      __le__,
+      __len__,
+      __lt__,
+      __ne__,
+      __new__,
+      __setitem__,
+      clear,
+      copy,
+      fromkeys,
+      get,
+      has_key,
+      items,
+      iteritems,
+      iterkeys,
+      itervalues,
+      keys,
+      pop,
+      popitem,
+      setdefault,
+      update,
+      values
+      
    
+    
    Inherited from object:
+      __reduce__,
+      __reduce_ex__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    connect(self,
+        request,
+        response,
+        db=1,
+        tablename='web2py_session',
+        masterapp=1,
+        migrate=True,
+        separate=1,
+        check_client=True)
+  
    
+      		source code 
+    
    
+  
+  separate can be separate=lambda(session_name): session_name[-2:] and 
+  it is used to determine a session prefix. separate can be True and it is 
+  set to session_name[-2:]
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.highlight-module.html
Index: applications/examples/static/epydoc/web2py.gluon.highlight-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.highlight-module.html
@@ -0,0 +1,185 @@
+
+
+
+
+  web2py.gluon.highlight
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module highlight
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module highlight
    source code

    
+This file is part of the web2py Web Framework Copyrighted by Massimo 
+  Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)

    
+
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        Highlighter
    
+      Do syntax highlighting.
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    highlight(code,
+        language,
+        link='/examples/globals/vars/',
+        counter=1,
+        styles={},
+        highlight_line=1,
+        attributes={})
+            source code
+            
+          
    
+      
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.highlight-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.highlight-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.highlight-pysrc.html
@@ -0,0 +1,493 @@
+
+
+
+
+  web2py.gluon.highlight
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module highlight
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.highlight
    
+
    +  1  #!/usr/bin/env python 
+  2  # -*- coding: utf-8 -*- 
+  3   
+  4  """ 
+  5  This file is part of the web2py Web Framework 
+  6  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+  7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+  8  """ 
+  9   
+ 10  import re 
+ 11  import cgi 
+ 12   
+ 13  __all__ = ['highlight'] 
+ 14   
+ 15   
+
     16 -class Highlighter(object): 
+
     17   
+ 18      """ 
+ 19      Do syntax highlighting. 
+ 20      """ 
+ 21   
+
     22 -    def __init__( 
+ 23          self, 
+ 24          mode, 
+ 25          link=None, 
+ 26          styles={}, 
+ 27          ): 
+
     28          """ 
+ 29          Initialise highlighter: 
+ 30              mode = language (PYTHON, WEB2PY,C, CPP, HTML, HTML_PLAIN) 
+ 31          """ 
+ 32   
+ 33          mode = mode.upper() 
+ 34          if link and link[-1] != '/': 
+ 35              link = link + '/' 
+ 36          self.link = link 
+ 37          self.styles = styles 
+ 38          self.output = [] 
+ 39          self.span_style = None 
+ 40          if mode == 'WEB2PY': 
+ 41              (mode, self.suppress_tokens) = ('PYTHON', []) 
+ 42          elif mode == 'PYTHON': 
+ 43              self.suppress_tokens = ['GOTOHTML'] 
+ 44          elif mode == 'CPP': 
+ 45              (mode, self.suppress_tokens) = ('C', []) 
+ 46          elif mode == 'C': 
+ 47              self.suppress_tokens = ['CPPKEYWORD'] 
+ 48          elif mode == 'HTML_PLAIN': 
+ 49              (mode, self.suppress_tokens) = ('HTML', ['GOTOPYTHON']) 
+ 50          elif mode == 'HTML': 
+ 51              self.suppress_tokens = [] 
+ 52          else: 
+ 53              raise SyntaxError, 'Unknown mode: %s' % mode 
+ 54          self.mode = mode 
+
     55   
+
     56 -    def c_tokenizer( 
+ 57          self, 
+ 58          token, 
+ 59          match, 
+ 60          style, 
+ 61          ): 
+
     62          """ 
+ 63          Callback for C specific highlighting. 
+ 64          """ 
+ 65   
+ 66          value = cgi.escape(match.group()) 
+ 67          self.change_style(token, style) 
+ 68          self.output.append(value) 
+
     69   
+
     70 -    def python_tokenizer( 
+ 71          self, 
+ 72          token, 
+ 73          match, 
+ 74          style, 
+ 75          ): 
+
     76          """ 
+ 77          Callback for python specific highlighting. 
+ 78          """ 
+ 79   
+ 80          value = cgi.escape(match.group()) 
+ 81          if token == 'MULTILINESTRING': 
+ 82              self.change_style(token, style) 
+ 83              self.output.append(value) 
+ 84              self.strMultilineString = match.group(1) 
+ 85              return 'PYTHONMultilineString' 
+ 86          elif token == 'ENDMULTILINESTRING': 
+ 87              if match.group(1) == self.strMultilineString: 
+ 88                  self.output.append(value) 
+ 89                  self.strMultilineString = '' 
+ 90                  return 'PYTHON' 
+ 91          if style and style[:5] == 'link:': 
+ 92              self.change_style(None, None) 
+ 93              (url, style) = style[5:].split(';', 1) 
+ 94              if url == 'None' or url == '': 
+ 95                  self.output.append('<span style="%s">%s</span>' 
+ 96                                      % (style, value)) 
+ 97              else: 
+ 98                  self.output.append('<a href="%s%s" style="%s">%s</a>' 
+ 99                                      % (url, value, style, value)) 
+100          else: 
+101              self.change_style(token, style) 
+102              self.output.append(value) 
+103          if token == 'GOTOHTML': 
+104              return 'HTML' 
+105          return None 
+
    106   
+
    107 -    def html_tokenizer( 
+108          self, 
+109          token, 
+110          match, 
+111          style, 
+112          ): 
+
    113          """ 
+114          Callback for HTML specific highlighting. 
+115          """ 
+116   
+117          value = cgi.escape(match.group()) 
+118          self.change_style(token, style) 
+119          self.output.append(value) 
+120          if token == 'GOTOPYTHON': 
+121              return 'PYTHON' 
+122          return None 
+
    123   
+124      all_styles = { 
+125          'C': (c_tokenizer, ( 
+126              ('COMMENT', re.compile(r'//.*\r?\n'), 
+127               'color: green; font-style: italic'), 
+128              ('MULTILINECOMMENT', re.compile(r'/\*.*?\*/', re.DOTALL), 
+129               'color: green; font-style: italic'), 
+130              ('PREPROCESSOR', re.compile(r'\s*#.*?[^\\]\s*\n', 
+131               re.DOTALL), 'color: magenta; font-style: italic'), 
+132              ('PUNC', re.compile(r'[-+*!&|^~/%\=<>\[\]{}(),.:]'), 
+133               'font-weight: bold'), 
+134              ('NUMBER', 
+135               re.compile(r'0x[0-9a-fA-F]+|[+-]?\d+(\.\d+)?([eE][+-]\d+)?|\d+'), 
+136               'color: red'), 
+137              ('KEYWORD', re.compile(r'(sizeof|int|long|short|char|void|' 
+138                + r'signed|unsigned|float|double|' 
+139                + r'goto|break|return|continue|asm|' 
+140                + r'case|default|if|else|switch|while|for|do|' 
+141                + r'struct|union|enum|typedef|' 
+142                + r'static|register|auto|volatile|extern|const)(?![a-zA-Z0-9_])'), 
+143               'color:#185369; font-weight: bold'), 
+144              ('CPPKEYWORD', 
+145               re.compile(r'(class|private|protected|public|template|new|delete|' 
+146                + r'this|friend|using|inline|export|bool|throw|try|catch|' 
+147                + r'operator|typeid|virtual)(?![a-zA-Z0-9_])'), 
+148               'color: blue; font-weight: bold'), 
+149              ('STRING', re.compile(r'r?u?\'(.*?)(?<!\\)\'|"(.*?)(?<!\\)"'), 
+150               'color: #FF9966'), 
+151              ('IDENTIFIER', re.compile(r'[a-zA-Z_][a-zA-Z0-9_]*'), 
+152               None), 
+153              ('WHITESPACE', re.compile(r'[   \r\n]+'), 'Keep'), 
+154              )), 
+155          'PYTHON': (python_tokenizer, ( 
+156              ('GOTOHTML', re.compile(r'\}\}'), 'color: red'), 
+157              ('PUNC', re.compile(r'[-+*!|&^~/%\=<>\[\]{}(),.:]'), 
+158               'font-weight: bold'), 
+159              ('NUMBER', 
+160               re.compile(r'0x[0-9a-fA-F]+|[+-]?\d+(\.\d+)?([eE][+-]\d+)?|\d+' 
+161               ), 'color: red'), 
+162              ('KEYWORD', 
+163               re.compile(r'(def|class|break|continue|del|exec|finally|pass|' 
+164                + r'print|raise|return|try|except|global|assert|lambda|' 
+165                + r'yield|for|while|if|elif|else|and|in|is|not|or|import|' 
+166                + r'from|True|False)(?![a-zA-Z0-9_])'), 
+167               'color:#185369; font-weight: bold'), 
+168              ('WEB2PY', 
+169               re.compile(r'(request|response|session|cache|redirect|local_import|HTTP|TR|XML|URL|BEAUTIFY|A|BODY|BR|B|CAT|CENTER|CODE|DIV|EM|EMBED|FIELDSET|LEGEND|FORM|H1|H2|H3|H4|H5|H6|IFRAME|HEAD|HR|HTML|I|IMG|INPUT|LABEL|LI|LINK|MARKMIN|MENU|META|OBJECT|OL|ON|OPTION|P|PRE|SCRIPT|SELECT|SPAN|STYLE|TABLE|THEAD|TBODY|TFOOT|TAG|TD|TEXTAREA|TH|TITLE|TT|T|UL|XHTML|IS_SLUG|IS_STRONG|IS_LOWER|IS_UPPER|IS_ALPHANUMERIC|IS_DATETIME|IS_DATETIME_IN_RANGE|IS_DATE|IS_DATE_IN_RANGE|IS_DECIMAL_IN_RANGE|IS_EMAIL|IS_EXPR|IS_FLOAT_IN_RANGE|IS_IMAGE|IS_INT_IN_RANGE|IS_IN_SET|IS_IPV4|IS_LIST_OF|IS_LENGTH|IS_MATCH|IS_EQUAL_TO|IS_EMPTY_OR|IS_NULL_OR|IS_NOT_EMPTY|IS_TIME|IS_UPLOAD_FILENAME|IS_URL|CLEANUP|CRYPT|IS_IN_DB|IS_NOT_IN_DB|DAL|Field|SQLFORM|SQLTABLE|xmlescape|embed64)(?![a-zA-Z0-9_])' 
+170               ), 'link:%(link)s;text-decoration:None;color:#FF5C1F;'), 
+171              ('MAGIC', re.compile(r'self|None'), 
+172               'color:#185369; font-weight: bold'), 
+173              ('MULTILINESTRING', re.compile(r'r?u?(\'\'\'|""")'), 
+174               'color: #FF9966'), 
+175              ('STRING', re.compile(r'r?u?\'(.*?)(?<!\\)\'|"(.*?)(?<!\\)"' 
+176               ), 'color: #FF9966'), 
+177              ('IDENTIFIER', re.compile(r'[a-zA-Z_][a-zA-Z0-9_]*'), 
+178               None), 
+179              ('COMMENT', re.compile(r'\#.*\r?\n'), 
+180               'color: green; font-style: italic'), 
+181              ('WHITESPACE', re.compile(r'[   \r\n]+'), 'Keep'), 
+182              )), 
+183          'PYTHONMultilineString': (python_tokenizer, 
+184                                    (('ENDMULTILINESTRING', 
+185                                    re.compile(r'.*?("""|\'\'\')', 
+186                                    re.DOTALL), 'color: darkred'), )), 
+187          'HTML': (html_tokenizer, ( 
+188              ('GOTOPYTHON', re.compile(r'\{\{'), 'color: red'), 
+189              ('COMMENT', re.compile(r'<!--[^>]*-->|<!>'), 
+190               'color: green; font-style: italic'), 
+191              ('XMLCRAP', re.compile(r'<![^>]*>'), 
+192               'color: blue; font-style: italic'), 
+193              ('SCRIPT', re.compile(r'<script .*?</script>', re.IGNORECASE 
+194                + re.DOTALL), 'color: black'), 
+195              ('TAG', re.compile(r'</?\s*[a-zA-Z0-9]+'), 
+196               'color: darkred; font-weight: bold'), 
+197              ('ENDTAG', re.compile(r'/?>'), 
+198               'color: darkred; font-weight: bold'), 
+199              )), 
+200          } 
+201   
+
    202 -    def highlight(self, data): 
+
    203          """ 
+204          Syntax highlight some python code. 
+205          Returns html version of code. 
+206          """ 
+207   
+208          i = 0 
+209          mode = self.mode 
+210          while i < len(data): 
+211              for (token, o_re, style) in Highlighter.all_styles[mode][1]: 
+212                  if not token in self.suppress_tokens: 
+213                      match = o_re.match(data, i) 
+214                      if match: 
+215                          if style: 
+216                              new_mode = \ 
+217                                  Highlighter.all_styles[mode][0](self, 
+218                                      token, match, style 
+219                                       % dict(link=self.link)) 
+220                          else: 
+221                              new_mode = \ 
+222                                  Highlighter.all_styles[mode][0](self, 
+223                                      token, match, style) 
+224                          if new_mode != None: 
+225                              mode = new_mode 
+226                          i += max(1, len(match.group())) 
+227                          break 
+228              else: 
+229                  self.change_style(None, None) 
+230                  self.output.append(data[i]) 
+231                  i += 1 
+232          self.change_style(None, None) 
+233          return ''.join(self.output).expandtabs(4) 
+
    234   
+
    235 -    def change_style(self, token, style): 
+
    236          """ 
+237          Generate output to change from existing style to another style only. 
+238          """ 
+239   
+240          if token in self.styles: 
+241              style = self.styles[token] 
+242          if self.span_style != style: 
+243              if style != 'Keep': 
+244                  if self.span_style != None: 
+245                      self.output.append('</span>') 
+246                  if style != None: 
+247                      self.output.append('<span style="%s">' % style) 
+248                  self.span_style = style 
+
    249   
+250   
+
    251 -def highlight( 
+252      code, 
+253      language, 
+254      link='/examples/globals/vars/', 
+255      counter=1, 
+256      styles={}, 
+257      highlight_line=None, 
+258      attributes={}, 
+259      ): 
+
    260      if not 'CODE' in styles: 
+261          code_style = """ 
+262          font-size: 11px; 
+263          font-family: Bitstream Vera Sans Mono,monospace; 
+264          background-color: transparent; 
+265          margin: 0; 
+266          padding: 5px; 
+267          border: none; 
+268          overflow: auto; 
+269          white-space: pre !important;\n""" 
+270      else: 
+271          code_style = styles['CODE'] 
+272      if not 'LINENUMBERS' in styles: 
+273          linenumbers_style = """ 
+274          font-size: 11px; 
+275          font-family: Bitstream Vera Sans Mono,monospace; 
+276          background-color: transparent; 
+277          margin: 0; 
+278          padding: 5px; 
+279          border: none; 
+280          color: #A0A0A0;\n""" 
+281      else: 
+282          linenumbers_style = styles['LINENUMBERS'] 
+283      if not 'LINEHIGHLIGHT' in styles: 
+284          linehighlight_style = "background-color: #EBDDE2;" 
+285      else: 
+286          linehighlight_style = styles['LINEHIGHLIGHT'] 
+287   
+288      if language and language.upper() in ['PYTHON', 'C', 'CPP', 'HTML', 
+289              'WEB2PY']: 
+290          code = Highlighter(language, link, styles).highlight(code) 
+291      else: 
+292          code = cgi.escape(code) 
+293      lines = code.split('\n') 
+294   
+295      if counter is None: 
+296          linenumbers = [''] * len(lines) 
+297      elif isinstance(counter, str): 
+298          linenumbers = [cgi.escape(counter)] * len(lines) 
+299      else: 
+300          linenumbers = [str(i + counter) + '.' for i in 
+301                                 xrange(len(lines))] 
+302   
+303      if highlight_line: 
+304          if counter and not isinstance(counter, str): 
+305              lineno = highlight_line - counter 
+306          else: 
+307              lineno = highlight_line 
+308          if lineno<len(lines): 
+309              lines[lineno] = '<div style="%s">%s</div>' % (linehighlight_style, lines[lineno]) 
+310              linenumbers[lineno] = '<div style="%s">%s</div>' % (linehighlight_style, linenumbers[lineno]) 
+311   
+312      code = '<br/>'.join(lines) 
+313      numbers = '<br/>'.join(linenumbers) 
+314   
+315      items = attributes.items() 
+316      fa = ' '.join([key[1:].lower() for (key, value) in items if key[:1] 
+317                     == '_' and value == None] + ['%s="%s"' 
+318                     % (key[1:].lower(), str(value).replace('"', "'")) 
+319                    for (key, value) in attributes.items() if key[:1] 
+320                     == '_' and value]) 
+321      if fa: 
+322          fa = ' ' + fa 
+323      return '<table%s><tr valign="top"><td style="width:40px; text-align: right;"><pre style="%s">%s</pre></td><td><pre style="%s">%s</pre></td></tr></table>'\ 
+324           % (fa, linenumbers_style, numbers, code_style, code) 
+
    325   
+326   
+327  if __name__ == '__main__': 
+328      import sys 
+329      argfp = open(sys.argv[1]) 
+330      data = argfp.read() 
+331      argfp.close() 
+332      print '<html><body>' + highlight(data, sys.argv[2])\ 
+333           + '</body></html>' 
+334   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:05 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.highlight.Highlighter-class.html
Index: applications/examples/static/epydoc/web2py.gluon.highlight.Highlighter-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.highlight.Highlighter-class.html
@@ -0,0 +1,449 @@
+
+
+
+
+  web2py.gluon.highlight.Highlighter
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module highlight ::
+        Class Highlighter
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Highlighter
    source code

    
+
    +object --+
+         |
+        Highlighter
+
    
+
+
    
+Do syntax highlighting.

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        mode,
+        link=1,
+        styles={})
    
+      Initialise highlighter:...    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    c_tokenizer(self,
+        token,
+        match,
+        style)
    
+      Callback for C specific highlighting.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    python_tokenizer(self,
+        token,
+        match,
+        style)
    
+      Callback for python specific highlighting.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    html_tokenizer(self,
+        token,
+        match,
+        style)
    
+      Callback for HTML specific highlighting.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    highlight(self,
+        data)
    
+      Syntax highlight some python code.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    change_style(self,
+        token,
+        style)
    
+      Generate output to change from existing style to another style 
+      only.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        all_styles = {'C': (<function c_tokenizer at 0xaf97d0>, (('COM...
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        mode,
+        link=1,
+        styles={})
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Initialise highlighter:
+    mode = language (PYTHON, WEB2PY,C, CPP, HTML, HTML_PLAIN)
+
+
    
+  
    
+    
    Overrides:
+      object.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    highlight(self,
+        data)
+  
    
+      		source code 
+    
    
+  
+  Syntax highlight some python code. Returns html version of code.
+  
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    all_styles
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'C': (<function c_tokenizer at 0xaf97d0>,
+       (('COMMENT',
+         re.compile(r'//.*\r?\n'),
+         'color: green; font-style: italic'),
+        ('MULTILINECOMMENT',
+         re.compile(r'(?s)/\*.*?\*/'),
+         'color: green; font-style: italic'),
+        ('PREPROCESSOR', re.compile(r'(?s)\s*#.*?[^\\]\s*\n'), 'color:\
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html-module.html
Index: applications/examples/static/epydoc/web2py.gluon.html-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html-module.html
@@ -0,0 +1,1200 @@
+
+
+
+
+  web2py.gluon.html
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module html
    source code

    
+This file is part of the web2py Web Framework Copyrighted by Massimo 
+  Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        XmlComponent
    
+      Abstract root for all Html components
+    
    
+       
+    
+        XML
    
+      use it to wrap a string that contains XML/HTML so that it will 
+        not be escaped by the template
+    
    
+       
+    
+        DIV
    
+      HTML helper, for easy generating and manipulating a DOM 
+        structure.
+    
    
+       
+    
+        CAT
+    
    
+       
+    
+        __TAG__
    
+      TAG factory example:
+    
    
+       
+    
+        HTML
    
+      There are four predefined document type definitions.
+    
    
+       
+    
+        XHTML
    
+      This is XHTML version of the HTML helper.
+    
    
+       
+    
+        HEAD
+    
    
+       
+    
+        TITLE
+    
    
+       
+    
+        META
+    
    
+       
+    
+        LINK
+    
    
+       
+    
+        SCRIPT
+    
    
+       
+    
+        STYLE
+    
    
+       
+    
+        IMG
+    
    
+       
+    
+        SPAN
+    
    
+       
+    
+        BODY
+    
    
+       
+    
+        H1
+    
    
+       
+    
+        H2
+    
    
+       
+    
+        H3
+    
    
+       
+    
+        H4
+    
    
+       
+    
+        H5
+    
    
+       
+    
+        H6
+    
    
+       
+    
+        P
    
+      Will replace ``\n`` by ``<br />`` if the `cr2br` attribute
+        is provided.
+    
    
+       
+    
+        B
+    
    
+       
+    
+        BR
+    
    
+       
+    
+        HR
+    
    
+       
+    
+        A
+    
    
+       
+    
+        BUTTON
+    
    
+       
+    
+        EM
+    
    
+       
+    
+        EMBED
+    
    
+       
+    
+        TT
+    
    
+       
+    
+        PRE
+    
    
+       
+    
+        CENTER
+    
    
+       
+    
+        CODE
    
+      displays code in HTML with syntax highlighting.
+    
    
+       
+    
+        LABEL
+    
    
+       
+    
+        LI
+    
    
+       
+    
+        UL
    
+      UL Component.
+    
    
+       
+    
+        OL
+    
    
+       
+    
+        TD
+    
    
+       
+    
+        TH
+    
    
+       
+    
+        TR
    
+      TR Component.
+    
    
+       
+    
+        THEAD
+    
    
+       
+    
+        TBODY
+    
    
+       
+    
+        TFOOT
+    
    
+       
+    
+        COL
+    
    
+       
+    
+        COLGROUP
+    
    
+       
+    
+        TABLE
    
+      TABLE Component.
+    
    
+       
+    
+        I
+    
    
+       
+    
+        IFRAME
+    
    
+       
+    
+        INPUT
    
+      INPUT Component
+
+examples::
+
+    >>> INPUT(_type='text', _name='name', value='Max').xml()
+    '<input name="name" type="text" value="Max" />'
+
+    >>> INPUT(_type='checkbox', _name='checkbox', value='on').xml()
+    '<input checked="checked" name="checkbox" type="checkbox" value="on" />'
+
+    >>> INPUT(_type='radio', _name='radio', _value='yes', value='yes').xml()
+    '<input checked="checked" name="radio" type="radio" value="yes" />'
+
+    >>> INPUT(_type='radio', _name='radio', _value='no', value='yes').xml()
+    '<input name="radio" type="radio" value="no" />'
+
+the input helper takes two special attributes value= and requires=.
+    
    
+       
+    
+        TEXTAREA
    
+      example:
+    
    
+       
+    
+        OPTION
+    
    
+       
+    
+        OBJECT
+    
    
+       
+    
+        OPTGROUP
+    
    
+       
+    
+        SELECT
    
+      example:
+    
    
+       
+    
+        FIELDSET
+    
    
+       
+    
+        LEGEND
+    
    
+       
+    
+        FORM
    
+      example:
+    
    
+       
+    
+        BEAUTIFY
    
+      example::
+
+    >>> BEAUTIFY(['a', 'b', {'hello': 'world'}]).xml()
+    '<div><table><tr><td><div>a</div></td></tr><tr><td><div>b</div></td></tr><tr><td><div><table><tr><td style="font-weight:bold;">hello</td><td valign="top">:</td><td><div>world</div></td></tr></table></div></td></tr></table></div>'
+
+turns any list, dictionary, etc into decent looking html.
+    
    
+       
+    
+        MENU
    
+      Used to build menus...
+    
    
+       
+    
+        web2pyHTMLParser
    
+      obj = web2pyHTMLParser(text) parses and html/xml text into 
+        web2py helpers.
+    
    
+       
+    
+        MARKMIN
    
+      For documentation: 
+        http://web2py.com/examples/static/markmin.html
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    join(S,
+        sequence)
    
+      Return a string which is the concatenation of the strings in the 
+      sequence.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    xmlescape(data,
+        quote=True)
    
+      returns an escaped string of the provided data    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    URL(a=1,
+        c=1,
+        f=1,
+        r=1,
+        args=[],
+        vars={},
+        anchor='',
+        extension=1,
+        env=1,
+        hmac_key=1,
+        hash_vars=True,
+        salt=1,
+        user_signature=1,
+        scheme=1,
+        host=1,
+        port=1)
    
+      generate a URL
+
+example::
+
+    >>> str(URL(a='a', c='c', f='f', args=['x', 'y', 'z'],
+    ...    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    verifyURL(request,
+        hmac_key=1,
+        hash_vars=True,
+        salt=1,
+        user_signature=1)
    
+      Verifies that a request's args & vars have not been tampered with by the user
+
+:param request: web2py's request object
+:param hmac_key: the key to authenticate with, must be the same one previously
+                used when calling URL()
+:param hash_vars: which vars to include in our hashing.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    XML_unpickle(data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    XML_pickle(data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    TAG_unpickler(data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    TAG_pickler(data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    embed64(filename=1,
+        file=1,
+        data=1,
+        extension='image/gif')
    
+      helper to encode the provided (binary) data into base64.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    test()
    
+      Example:    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    markdown_serializer(text,
+        tag=1,
+        attr={})
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    markmin_serializer(text,
+        tag=1,
+        attr={})
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        regex_crlf = re.compile(r'[\r\n]')
+    
    
+       
+    
+        ON = True
+    
    
+       
+    
+        TAG = __TAG__()
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Function Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    join(S,
+        sequence)
+  
    
+      		source code 
+    
    
+  
+  Return a string which is the concatenation of the strings in the 
+  sequence.  The separator between elements is S.
+  
    
+    
    Returns:
    
+        
    +string
+
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    xmlescape(data,
+        quote=True)
+  
    
+      		source code 
+    
    
+  
+  
    returns an escaped string of the provided data
    
+  :param data: the data to be escaped :param quote: optional (default 
+  False)
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    URL(a=1,
+        c=1,
+        f=1,
+        r=1,
+        args=[],
+        vars={},
+        anchor='',
+        extension=1,
+        env=1,
+        hmac_key=1,
+        hash_vars=True,
+        salt=1,
+        user_signature=1,
+        scheme=1,
+        host=1,
+        port=1)
+  
    
+      		source code 
+    
    
+  
+  
    +
+generate a URL
+
+example::
+
+    >>> str(URL(a='a', c='c', f='f', args=['x', 'y', 'z'],
+    ...     vars={'p':1, 'q':2}, anchor='1'))
+    '/a/c/f/x/y/z?p=1&q=2#1'
+
+    >>> str(URL(a='a', c='c', f='f', args=['x', 'y', 'z'],
+    ...     vars={'p':(1,3), 'q':2}, anchor='1'))
+    '/a/c/f/x/y/z?p=1&p=3&q=2#1'
+
+    >>> str(URL(a='a', c='c', f='f', args=['x', 'y', 'z'],
+    ...     vars={'p':(3,1), 'q':2}, anchor='1'))
+    '/a/c/f/x/y/z?p=3&p=1&q=2#1'
+
+    >>> str(URL(a='a', c='c', f='f', anchor='1+2'))
+    '/a/c/f#1%2B2'
+
+    >>> str(URL(a='a', c='c', f='f', args=['x', 'y', 'z'],
+    ...     vars={'p':(1,3), 'q':2}, anchor='1', hmac_key='key'))
+    '/a/c/f/x/y/z?p=1&p=3&q=2&_signature=5d06bb8a4a6093dd325da2ee591c35c61afbd3c6#1'
+
+generates a url '/a/c/f' corresponding to application a, controller c
+and function f. If r=request is passed, a, c, f are set, respectively,
+to r.application, r.controller, r.function.
+
+The more typical usage is:
+
+URL(r=request, f='index') that generates a url for the index function
+within the present application and controller.
+
+:param a: application (default to current if r is given)
+:param c: controller (default to current if r is given)
+:param f: function (default to current if r is given)
+:param r: request (optional)
+:param args: any arguments (optional)
+:param vars: any variables (optional)
+:param anchor: anchorname, without # (optional)
+:param hmac_key: key to use when generating hmac signature (optional)
+:param hash_vars: which of the vars to include in our hmac signature
+    True (default) - hash all vars, False - hash none of the vars,
+    iterable - hash only the included vars ['key1','key2']
+:param scheme: URI scheme (True, 'http' or 'https', etc); forces absolute URL (optional)
+:param host: string to force absolute URL with host (True means http_host)
+:param port: optional port number (forces absolute URL)
+
+:raises SyntaxError: when no application, controller or function is
+    available
+:raises SyntaxError: when a CRLF is found in the generated url
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    verifyURL(request,
+        hmac_key=1,
+        hash_vars=True,
+        salt=1,
+        user_signature=1)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Verifies that a request's args & vars have not been tampered with by the user
+
+:param request: web2py's request object
+:param hmac_key: the key to authenticate with, must be the same one previously
+                used when calling URL()
+:param hash_vars: which vars to include in our hashing. (Optional)
+                Only uses the 1st value currently
+                True (or undefined) means all, False none,
+                an iterable just the specified keys
+
+do not call directly. Use instead:
+
+URL.verify(hmac_key='...')
+
+the key has to match the one used to generate the URL.
+
+    >>> r = Storage()
+    >>> gv = Storage(p=(1,3),q=2,_signature='5d06bb8a4a6093dd325da2ee591c35c61afbd3c6')
+    >>> r.update(dict(application='a', controller='c', function='f'))
+    >>> r['args'] = ['x', 'y', 'z']
+    >>> r['get_vars'] = gv
+    >>> verifyURL(r, 'key')
+    True
+    >>> verifyURL(r, 'kay')
+    False
+    >>> r.get_vars.p = (3, 1)
+    >>> verifyURL(r, 'key')
+    True
+    >>> r.get_vars.p = (3, 2)
+    >>> verifyURL(r, 'key')
+    False
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    embed64(filename=1,
+        file=1,
+        data=1,
+        extension='image/gif')
+  
    
+      		source code 
+    
    
+  
+  
    helper to encode the provided (binary) data into base64.
    
+  :param filename: if provided, opens and reads this file in 'rb' mode 
+  :param file: if provided, reads this file :param data: if provided, uses 
+  the provided data
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    test()
+  
    
+      		source code 
+    
    
+  
+  Example:
+
    +>>> from validators import *
+>>> print DIV(A('click me', _href=URL(a='a', c='b', f='c')), BR(), HR(), DIV(SPAN("World"), _class='unknown')).xml()
+<div><a href="/a/b/c">click me</a><br /><hr /><div class="unknown"><span>World</span></div></div>
+>>> print DIV(UL("doc","cat","mouse")).xml()
+<div><ul><li>doc</li><li>cat</li><li>mouse</li></ul></div>
+>>> print DIV(UL("doc", LI("cat", _class='feline'), 18)).xml()
+<div><ul><li>doc</li><li class="feline">cat</li><li>18</li></ul></div>
+>>> print TABLE(['a', 'b', 'c'], TR('d', 'e', 'f'), TR(TD(1), TD(2), TD(3))).xml()
+<table><tr><td>a</td><td>b</td><td>c</td></tr><tr><td>d</td><td>e</td><td>f</td></tr><tr><td>1</td><td>2</td><td>3</td></tr></table>
+>>> form=FORM(INPUT(_type='text', _name='myvar', requires=IS_EXPR('int(value)<10')))
+>>> print form.xml()
+<form action="" enctype="multipart/form-data" method="post"><input name="myvar" type="text" /></form>
+>>> print form.accepts({'myvar':'34'}, formname=None)
+False
+>>> print form.xml()
+<form action="" enctype="multipart/form-data" method="post"><input name="myvar" type="text" value="34" /><div class="error" id="myvar__error">invalid expression</div></form>
+>>> print form.accepts({'myvar':'4'}, formname=None, keepvalues=True)
+True
+>>> print form.xml()
+<form action="" enctype="multipart/form-data" method="post"><input name="myvar" type="text" value="4" /></form>
+>>> form=FORM(SELECT('cat', 'dog', _name='myvar'))
+>>> print form.accepts({'myvar':'dog'}, formname=None, keepvalues=True)
+True
+>>> print form.xml()
+<form action="" enctype="multipart/form-data" method="post"><select name="myvar"><option value="cat">cat</option><option selected="selected" value="dog">dog</option></select></form>
+>>> form=FORM(INPUT(_type='text', _name='myvar', requires=IS_MATCH('^\w+$', 'only alphanumeric!')))
+>>> print form.accepts({'myvar':'as df'}, formname=None)
+False
+>>> print form.xml()
+<form action="" enctype="multipart/form-data" method="post"><input name="myvar" type="text" value="as df" /><div class="error" id="myvar__error">only alphanumeric!</div></form>
+>>> session={}
+>>> form=FORM(INPUT(value="Hello World", _name="var", requires=IS_MATCH('^\w+$')))
+>>> if form.accepts({}, session,formname=None): print 'passed'
+>>> if form.accepts({'var':'test ', '_formkey': session['_formkey[None]']}, session, formname=None): print 'passed'
    
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.html-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html-pysrc.html
@@ -0,0 +1,9736 @@
+
+
+
+
+  web2py.gluon.html
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.html
    
+
    +   1  #!/usr/bin/env python 
+   2  # -*- coding: utf-8 -*- 
+   3   
+   4  """ 
+   5  This file is part of the web2py Web Framework 
+   6  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+   7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+   8  """ 
+   9   
+  10  import cgi 
+  11  import os 
+  12  import re 
+  13  import copy 
+  14  import types 
+  15  import urllib 
+  16  import base64 
+  17  import sanitizer 
+  18  import rewrite 
+  19  import itertools 
+  20  import decoder 
+  21  import copy_reg 
+  22  import cPickle 
+  23  import marshal 
+  24  from HTMLParser import HTMLParser 
+  25  from htmlentitydefs import name2codepoint 
+  26  from contrib.markmin.markmin2html import render 
+  27   
+  28  from storage import Storage 
+  29  from highlight import highlight 
+  30  from utils import web2py_uuid, hmac_hash 
+  31   
+  32  import hmac 
+  33  import hashlib 
+  34   
+  35  regex_crlf = re.compile('\r|\n') 
+  36   
+  37  join = ''.join 
+  38   
+  39  __all__ = [ 
+  40      'A', 
+  41      'B', 
+  42      'BEAUTIFY', 
+  43      'BODY', 
+  44      'BR', 
+  45      'BUTTON', 
+  46      'CENTER', 
+  47      'CAT', 
+  48      'CODE', 
+  49      'DIV', 
+  50      'EM', 
+  51      'EMBED', 
+  52      'FIELDSET', 
+  53      'FORM', 
+  54      'H1', 
+  55      'H2', 
+  56      'H3', 
+  57      'H4', 
+  58      'H5', 
+  59      'H6', 
+  60      'HEAD', 
+  61      'HR', 
+  62      'HTML', 
+  63      'I', 
+  64      'IFRAME', 
+  65      'IMG', 
+  66      'INPUT', 
+  67      'LABEL', 
+  68      'LEGEND', 
+  69      'LI', 
+  70      'LINK', 
+  71      'OL', 
+  72      'UL', 
+  73      'MARKMIN', 
+  74      'MENU', 
+  75      'META', 
+  76      'OBJECT', 
+  77      'ON', 
+  78      'OPTION', 
+  79      'P', 
+  80      'PRE', 
+  81      'SCRIPT', 
+  82      'OPTGROUP', 
+  83      'SELECT', 
+  84      'SPAN', 
+  85      'STYLE', 
+  86      'TABLE', 
+  87      'TAG', 
+  88      'TD', 
+  89      'TEXTAREA', 
+  90      'TH', 
+  91      'THEAD', 
+  92      'TBODY', 
+  93      'TFOOT', 
+  94      'TITLE', 
+  95      'TR', 
+  96      'TT', 
+  97      'URL', 
+  98      'XHTML', 
+  99      'XML', 
+ 100      'xmlescape', 
+ 101      'embed64', 
+ 102      ] 
+ 103   
+ 104   
+
     105 -def xmlescape(data, quote = True): 
+
     106      """ 
+ 107      returns an escaped string of the provided data 
+ 108   
+ 109      :param data: the data to be escaped 
+ 110      :param quote: optional (default False) 
+ 111      """ 
+ 112   
+ 113      # first try the xml function 
+ 114      if hasattr(data,'xml') and callable(data.xml): 
+ 115          return data.xml() 
+ 116   
+ 117      # otherwise, make it a string 
+ 118      if not isinstance(data, (str, unicode)): 
+ 119          data = str(data) 
+ 120      elif isinstance(data, unicode): 
+ 121          data = data.encode('utf8', 'xmlcharrefreplace') 
+ 122   
+ 123      # ... and do the escaping 
+ 124      data = cgi.escape(data, quote).replace("'","&#x27;") 
+ 125      return data 
+
     126   
+ 127   
+
     128 -def URL( 
+ 129      a=None, 
+ 130      c=None, 
+ 131      f=None, 
+ 132      r=None, 
+ 133      args=[], 
+ 134      vars={}, 
+ 135      anchor='', 
+ 136      extension=None, 
+ 137      env=None, 
+ 138      hmac_key=None, 
+ 139      hash_vars=True, 
+ 140      salt=None, 
+ 141      user_signature=None, 
+ 142      scheme=None, 
+ 143      host=None, 
+ 144      port=None, 
+ 145      ): 
+
     146      """ 
+ 147      generate a URL 
+ 148   
+ 149      example:: 
+ 150   
+ 151          >>> str(URL(a='a', c='c', f='f', args=['x', 'y', 'z'], 
+ 152          ...     vars={'p':1, 'q':2}, anchor='1')) 
+ 153          '/a/c/f/x/y/z?p=1&q=2#1' 
+ 154   
+ 155          >>> str(URL(a='a', c='c', f='f', args=['x', 'y', 'z'], 
+ 156          ...     vars={'p':(1,3), 'q':2}, anchor='1')) 
+ 157          '/a/c/f/x/y/z?p=1&p=3&q=2#1' 
+ 158   
+ 159          >>> str(URL(a='a', c='c', f='f', args=['x', 'y', 'z'], 
+ 160          ...     vars={'p':(3,1), 'q':2}, anchor='1')) 
+ 161          '/a/c/f/x/y/z?p=3&p=1&q=2#1' 
+ 162   
+ 163          >>> str(URL(a='a', c='c', f='f', anchor='1+2')) 
+ 164          '/a/c/f#1%2B2' 
+ 165   
+ 166          >>> str(URL(a='a', c='c', f='f', args=['x', 'y', 'z'], 
+ 167          ...     vars={'p':(1,3), 'q':2}, anchor='1', hmac_key='key')) 
+ 168          '/a/c/f/x/y/z?p=1&p=3&q=2&_signature=5d06bb8a4a6093dd325da2ee591c35c61afbd3c6#1' 
+ 169   
+ 170      generates a url '/a/c/f' corresponding to application a, controller c 
+ 171      and function f. If r=request is passed, a, c, f are set, respectively, 
+ 172      to r.application, r.controller, r.function. 
+ 173   
+ 174      The more typical usage is: 
+ 175   
+ 176      URL(r=request, f='index') that generates a url for the index function 
+ 177      within the present application and controller. 
+ 178   
+ 179      :param a: application (default to current if r is given) 
+ 180      :param c: controller (default to current if r is given) 
+ 181      :param f: function (default to current if r is given) 
+ 182      :param r: request (optional) 
+ 183      :param args: any arguments (optional) 
+ 184      :param vars: any variables (optional) 
+ 185      :param anchor: anchorname, without # (optional) 
+ 186      :param hmac_key: key to use when generating hmac signature (optional) 
+ 187      :param hash_vars: which of the vars to include in our hmac signature 
+ 188          True (default) - hash all vars, False - hash none of the vars, 
+ 189          iterable - hash only the included vars ['key1','key2'] 
+ 190      :param scheme: URI scheme (True, 'http' or 'https', etc); forces absolute URL (optional) 
+ 191      :param host: string to force absolute URL with host (True means http_host) 
+ 192      :param port: optional port number (forces absolute URL) 
+ 193   
+ 194      :raises SyntaxError: when no application, controller or function is 
+ 195          available 
+ 196      :raises SyntaxError: when a CRLF is found in the generated url 
+ 197      """ 
+ 198   
+ 199      if args in (None,[]): args = [] 
+ 200      vars = vars or {} 
+ 201      application = None 
+ 202      controller = None 
+ 203      function = None 
+ 204   
+ 205      if not r: 
+ 206          if a and not c and not f: (f,a,c)=(a,c,f) 
+ 207          elif a and c and not f: (c,f,a)=(a,c,f) 
+ 208          from globals import current 
+ 209          if hasattr(current,'request'): 
+ 210              r = current.request 
+ 211      if r: 
+ 212          application = r.application 
+ 213          controller = r.controller 
+ 214          function = r.function 
+ 215          env = r.env 
+ 216          if extension is None and r.extension != 'html': 
+ 217              extension = r.extension 
+ 218      if a: 
+ 219          application = a 
+ 220      if c: 
+ 221          controller = c 
+ 222      if f: 
+ 223          if not isinstance(f, str): 
+ 224              function = f.__name__ 
+ 225          elif '.' in f: 
+ 226              function, extension = f.split('.', 1) 
+ 227          else: 
+ 228              function = f 
+ 229   
+ 230      function2 = '%s.%s' % (function,extension or 'html') 
+ 231   
+ 232      if not (application and controller and function): 
+ 233          raise SyntaxError, 'not enough information to build the url' 
+ 234   
+ 235      if not isinstance(args, (list, tuple)): 
+ 236          args = [args] 
+ 237      other = args and urllib.quote('/' + '/'.join([str(x) for x in args])) or '' 
+ 238      if other.endswith('/'): 
+ 239          other += '/'    # add trailing slash to make last trailing empty arg explicit 
+ 240   
+ 241      if vars.has_key('_signature'): vars.pop('_signature') 
+ 242      list_vars = [] 
+ 243      for (key, vals) in sorted(vars.items()): 
+ 244          if not isinstance(vals, (list, tuple)): 
+ 245              vals = [vals] 
+ 246          for val in vals: 
+ 247              list_vars.append((key, val)) 
+ 248   
+ 249      if user_signature: 
+ 250          from globals import current 
+ 251          if current.session.auth: 
+ 252              hmac_key = current.session.auth.hmac_key 
+ 253   
+ 254      if hmac_key: 
+ 255          # generate an hmac signature of the vars & args so can later 
+ 256          # verify the user hasn't messed with anything 
+ 257   
+ 258          h_args = '/%s/%s/%s%s' % (application, controller, function2, other) 
+ 259   
+ 260          # how many of the vars should we include in our hash? 
+ 261          if hash_vars is True:       # include them all 
+ 262              h_vars = list_vars 
+ 263          elif hash_vars is False:    # include none of them 
+ 264              h_vars = '' 
+ 265          else:                       # include just those specified 
+ 266              if hash_vars and not isinstance(hash_vars, (list, tuple)): 
+ 267                  hash_vars = [hash_vars] 
+ 268              h_vars = [(k, v) for (k, v) in list_vars if k in hash_vars] 
+ 269   
+ 270          # re-assembling the same way during hash authentication 
+ 271          message = h_args + '?' + urllib.urlencode(sorted(h_vars)) 
+ 272   
+ 273          sig = hmac_hash(message,hmac_key,salt=salt) 
+ 274          # add the signature into vars 
+ 275          list_vars.append(('_signature', sig)) 
+ 276   
+ 277      if list_vars: 
+ 278          other += '?%s' % urllib.urlencode(list_vars) 
+ 279      if anchor: 
+ 280          other += '#' + urllib.quote(str(anchor)) 
+ 281      if extension: 
+ 282          function += '.' + extension 
+ 283   
+ 284      if regex_crlf.search(join([application, controller, function, other])): 
+ 285          raise SyntaxError, 'CRLF Injection Detected' 
+ 286      url = rewrite.url_out(r, env, application, controller, function, 
+ 287                            args, other, scheme, host, port) 
+ 288      return url 
+
     289   
+ 290   
+
     291 -def verifyURL(request, hmac_key=None, hash_vars=True, salt=None, user_signature=None): 
+
     292      """ 
+ 293      Verifies that a request's args & vars have not been tampered with by the user 
+ 294   
+ 295      :param request: web2py's request object 
+ 296      :param hmac_key: the key to authenticate with, must be the same one previously 
+ 297                      used when calling URL() 
+ 298      :param hash_vars: which vars to include in our hashing. (Optional) 
+ 299                      Only uses the 1st value currently 
+ 300                      True (or undefined) means all, False none, 
+ 301                      an iterable just the specified keys 
+ 302   
+ 303      do not call directly. Use instead: 
+ 304   
+ 305      URL.verify(hmac_key='...') 
+ 306   
+ 307      the key has to match the one used to generate the URL. 
+ 308   
+ 309          >>> r = Storage() 
+ 310          >>> gv = Storage(p=(1,3),q=2,_signature='5d06bb8a4a6093dd325da2ee591c35c61afbd3c6') 
+ 311          >>> r.update(dict(application='a', controller='c', function='f')) 
+ 312          >>> r['args'] = ['x', 'y', 'z'] 
+ 313          >>> r['get_vars'] = gv 
+ 314          >>> verifyURL(r, 'key') 
+ 315          True 
+ 316          >>> verifyURL(r, 'kay') 
+ 317          False 
+ 318          >>> r.get_vars.p = (3, 1) 
+ 319          >>> verifyURL(r, 'key') 
+ 320          True 
+ 321          >>> r.get_vars.p = (3, 2) 
+ 322          >>> verifyURL(r, 'key') 
+ 323          False 
+ 324   
+ 325      """ 
+ 326   
+ 327      if not request.get_vars.has_key('_signature'): 
+ 328          return False # no signature in the request URL 
+ 329   
+ 330      # check if user_signature requires 
+ 331      if user_signature: 
+ 332          from globals import current 
+ 333          if not current.session: 
+ 334              return False 
+ 335          hmac_key = current.session.auth.hmac_key 
+ 336      if not hmac_key: 
+ 337          return False 
+ 338   
+ 339      # get our sig from request.get_vars for later comparison 
+ 340      original_sig = request.get_vars._signature 
+ 341   
+ 342      # now generate a new hmac for the remaining args & vars 
+ 343      vars, args = request.get_vars, request.args 
+ 344   
+ 345      # remove the signature var since it was not part of our signed message 
+ 346      request.get_vars.pop('_signature') 
+ 347   
+ 348      # join all the args & vars into one long string 
+ 349   
+ 350      # always include all of the args 
+ 351      other = args and urllib.quote('/' + '/'.join([str(x) for x in args])) or '' 
+ 352      h_args = '/%s/%s/%s.%s%s' % (request.application, 
+ 353                                   request.controller, 
+ 354                                   request.function, 
+ 355                                   request.extension, 
+ 356                                   other) 
+ 357   
+ 358      # but only include those vars specified (allows more flexibility for use with 
+ 359      # forms or ajax) 
+ 360   
+ 361      list_vars = [] 
+ 362      for (key, vals) in sorted(vars.items()): 
+ 363          if not isinstance(vals, (list, tuple)): 
+ 364              vals = [vals] 
+ 365          for val in vals: 
+ 366              list_vars.append((key, val)) 
+ 367   
+ 368      # which of the vars are to be included? 
+ 369      if hash_vars is True:       # include them all 
+ 370          h_vars = list_vars 
+ 371      elif hash_vars is False:    # include none of them 
+ 372          h_vars = '' 
+ 373      else:                       # include just those specified 
+ 374          # wrap in a try - if the desired vars have been removed it'll fail 
+ 375          try: 
+ 376              if hash_vars and not isinstance(hash_vars, (list, tuple)): 
+ 377                  hash_vars = [hash_vars] 
+ 378              h_vars = [(k, v) for (k, v) in list_vars if k in hash_vars] 
+ 379          except: 
+ 380              # user has removed one of our vars! Immediate fail 
+ 381              return False 
+ 382      # build the full message string with both args & vars 
+ 383      message = h_args + '?' + urllib.urlencode(sorted(h_vars)) 
+ 384   
+ 385      # hash with the hmac_key provided 
+ 386      sig = hmac_hash(message,str(hmac_key),salt=salt) 
+ 387   
+ 388      # put _signature back in get_vars just in case a second call to URL.verify is performed 
+ 389      # (otherwise it'll immediately return false) 
+ 390      request.get_vars['_signature'] = original_sig 
+ 391   
+ 392      # return whether or not the signature in the request matched the one we just generated 
+ 393      # (I.E. was the message the same as the one we originally signed) 
+ 394      return original_sig == sig 
+
     395   
+ 396  URL.verify = verifyURL 
+ 397   
+ 398  ON = True 
+ 399   
+ 400   
+
     401 -class XmlComponent(object): 
+
     402      """ 
+ 403      Abstract root for all Html components 
+ 404      """ 
+ 405   
+ 406      # TODO: move some DIV methods to here 
+ 407   
+
     408 -    def xml(self): 
+
     409          raise NotImplementedError 
+
     410   
+ 411   
+
     412 -class XML(XmlComponent): 
+
     413      """ 
+ 414      use it to wrap a string that contains XML/HTML so that it will not be 
+ 415      escaped by the template 
+ 416   
+ 417      example: 
+ 418   
+ 419      >>> XML('<h1>Hello</h1>').xml() 
+ 420      '<h1>Hello</h1>' 
+ 421      """ 
+ 422   
+
     423 -    def __init__( 
+ 424          self, 
+ 425          text, 
+ 426          sanitize = False, 
+ 427          permitted_tags = [ 
+ 428              'a', 
+ 429              'b', 
+ 430              'blockquote', 
+ 431              'br/', 
+ 432              'i', 
+ 433              'li', 
+ 434              'ol', 
+ 435              'ul', 
+ 436              'p', 
+ 437              'cite', 
+ 438              'code', 
+ 439              'pre', 
+ 440              'img/', 
+ 441              'h1','h2','h3','h4','h5','h6', 
+ 442              'table','tr','td','div', 
+ 443              ], 
+ 444          allowed_attributes = { 
+ 445              'a': ['href', 'title'], 
+ 446              'img': ['src', 'alt'], 
+ 447              'blockquote': ['type'], 
+ 448              'td': ['colspan'], 
+ 449              }, 
+ 450          ): 
+
     451          """ 
+ 452          :param text: the XML text 
+ 453          :param sanitize: sanitize text using the permitted tags and allowed 
+ 454              attributes (default False) 
+ 455          :param permitted_tags: list of permitted tags (default: simple list of 
+ 456              tags) 
+ 457          :param allowed_attributes: dictionary of allowed attributed (default 
+ 458              for A, IMG and BlockQuote). 
+ 459              The key is the tag; the value is a list of allowed attributes. 
+ 460          """ 
+ 461   
+ 462          if sanitize: 
+ 463              text = sanitizer.sanitize(text, permitted_tags, 
+ 464                      allowed_attributes) 
+ 465          if isinstance(text, unicode): 
+ 466              text = text.encode('utf8', 'xmlcharrefreplace') 
+ 467          elif not isinstance(text, str): 
+ 468              text = str(text) 
+ 469          self.text = text 
+
     470   
+
     471 -    def xml(self): 
+
     472          return self.text 
+
     473   
+
     474 -    def __str__(self): 
+
     475          return self.xml() 
+
     476   
+
     477 -    def __add__(self,other): 
+
     478          return '%s%s' % (self,other) 
+
     479   
+
     480 -    def __radd__(self,other): 
+
     481          return '%s%s' % (other,self) 
+
     482   
+
     483 -    def __cmp__(self,other): 
+
     484          return cmp(str(self),str(other)) 
+
     485   
+
     486 -    def __hash__(self): 
+
     487          return hash(str(self)) 
+
     488   
+
     489 -    def __getattr__(self,name): 
+
     490          return getattr(str(self),name) 
+
     491   
+
     492 -    def __getitem__(self,i): 
+
     493          return str(self)[i] 
+
     494   
+
     495 -    def __getslice__(self,i,j): 
+
     496          return str(self)[i:j] 
+
     497   
+
     498 -    def __iter__(self): 
+
     499          for c in str(self): yield c 
+
     500   
+
     501 -    def __len__(self): 
+
     502          return len(str(self)) 
+
     503   
+
     504 -    def flatten(self,render=None): 
+
     505          """ 
+ 506          return the text stored by the XML object rendered by the render function 
+ 507          """ 
+ 508          if render: 
+ 509              return render(self.text,None,{}) 
+ 510          return self.text 
+
     511   
+
     512 -    def elements(self, *args, **kargs): 
+
     513          """ 
+ 514          to be considered experimental since the behavior of this method is questionable 
+ 515          another options could be TAG(self.text).elements(*args,**kargs) 
+ 516          """ 
+ 517          return [] 
+
     518   
+ 519  ### important to allow safe session.flash=T(....) 
+
     520 -def XML_unpickle(data): 
+
     521      return marshal.loads(data) 
+
     522 -def XML_pickle(data): 
+
     523      return XML_unpickle, (marshal.dumps(str(data)),) 
+
     524  copy_reg.pickle(XML, XML_pickle, XML_unpickle) 
+ 525   
+ 526   
+ 527   
+
     528 -class DIV(XmlComponent): 
+
     529      """ 
+ 530      HTML helper, for easy generating and manipulating a DOM structure. 
+ 531      Little or no validation is done. 
+ 532   
+ 533      Behaves like a dictionary regarding updating of attributes. 
+ 534      Behaves like a list regarding inserting/appending components. 
+ 535   
+ 536      example:: 
+ 537   
+ 538          >>> DIV('hello', 'world', _style='color:red;').xml() 
+ 539          '<div style=\"color:red;\">helloworld</div>' 
+ 540   
+ 541      all other HTML helpers are derived from DIV. 
+ 542   
+ 543      _something=\"value\" attributes are transparently translated into 
+ 544      something=\"value\" HTML attributes 
+ 545      """ 
+ 546   
+ 547      # name of the tag, subclasses should update this 
+ 548      # tags ending with a '/' denote classes that cannot 
+ 549      # contain components 
+ 550      tag = 'div' 
+ 551   
+
     552 -    def __init__(self, *components, **attributes): 
+
     553          """ 
+ 554          :param *components: any components that should be nested in this element 
+ 555          :param **attributes: any attributes you want to give to this element 
+ 556   
+ 557          :raises SyntaxError: when a stand alone tag receives components 
+ 558          """ 
+ 559   
+ 560          if self.tag[-1:] == '/' and components: 
+ 561              raise SyntaxError, '<%s> tags cannot have components'\ 
+ 562                   % self.tag 
+ 563          if len(components) == 1 and isinstance(components[0], (list,tuple)): 
+ 564              self.components = list(components[0]) 
+ 565          else: 
+ 566              self.components = list(components) 
+ 567          self.attributes = attributes 
+ 568          self._fixup() 
+ 569          # converts special attributes in components attributes 
+ 570          self._postprocessing() 
+ 571          self.parent = None 
+ 572          for c in self.components: 
+ 573              self._setnode(c) 
+
     574   
+
     575 -    def update(self, **kargs): 
+
     576          """ 
+ 577          dictionary like updating of the tag attributes 
+ 578          """ 
+ 579   
+ 580          for (key, value) in kargs.items(): 
+ 581              self[key] = value 
+ 582          return self 
+
     583   
+
     584 -    def append(self, value): 
+
     585          """ 
+ 586          list style appending of components 
+ 587   
+ 588          >>> a=DIV() 
+ 589          >>> a.append(SPAN('x')) 
+ 590          >>> print a 
+ 591          <div><span>x</span></div> 
+ 592          """ 
+ 593          self._setnode(value) 
+ 594          ret = self.components.append(value) 
+ 595          self._fixup() 
+ 596          return ret 
+
     597   
+
     598 -    def insert(self, i, value): 
+
     599          """ 
+ 600          list style inserting of components 
+ 601   
+ 602          >>> a=DIV() 
+ 603          >>> a.insert(0,SPAN('x')) 
+ 604          >>> print a 
+ 605          <div><span>x</span></div> 
+ 606          """ 
+ 607          self._setnode(value) 
+ 608          ret = self.components.insert(i, value) 
+ 609          self._fixup() 
+ 610          return ret 
+
     611   
+
     612 -    def __getitem__(self, i): 
+
     613          """ 
+ 614          gets attribute with name 'i' or component #i. 
+ 615          If attribute 'i' is not found returns None 
+ 616   
+ 617          :param i: index 
+ 618             if i is a string: the name of the attribute 
+ 619             otherwise references to number of the component 
+ 620          """ 
+ 621   
+ 622          if isinstance(i, str): 
+ 623              try: 
+ 624                  return self.attributes[i] 
+ 625              except KeyError: 
+ 626                  return None 
+ 627          else: 
+ 628              return self.components[i] 
+
     629   
+
     630 -    def __setitem__(self, i, value): 
+
     631          """ 
+ 632          sets attribute with name 'i' or component #i. 
+ 633   
+ 634          :param i: index 
+ 635             if i is a string: the name of the attribute 
+ 636             otherwise references to number of the component 
+ 637          :param value: the new value 
+ 638          """ 
+ 639          self._setnode(value) 
+ 640          if isinstance(i, (str, unicode)): 
+ 641              self.attributes[i] = value 
+ 642          else: 
+ 643              self.components[i] = value 
+
     644   
+
     645 -    def __delitem__(self, i): 
+
     646          """ 
+ 647          deletes attribute with name 'i' or component #i. 
+ 648   
+ 649          :param i: index 
+ 650             if i is a string: the name of the attribute 
+ 651             otherwise references to number of the component 
+ 652          """ 
+ 653   
+ 654          if isinstance(i, str): 
+ 655              del self.attributes[i] 
+ 656          else: 
+ 657              del self.components[i] 
+
     658   
+
     659 -    def __len__(self): 
+
     660          """ 
+ 661          returns the number of included components 
+ 662          """ 
+ 663          return len(self.components) 
+
     664   
+
     665 -    def __nonzero__(self): 
+
     666          """ 
+ 667          always return True 
+ 668          """ 
+ 669          return True 
+
     670   
+
     671 -    def _fixup(self): 
+
     672          """ 
+ 673          Handling of provided components. 
+ 674   
+ 675          Nothing to fixup yet. May be overridden by subclasses, 
+ 676          eg for wrapping some components in another component or blocking them. 
+ 677          """ 
+ 678          return 
+
     679   
+
     680 -    def _wrap_components(self, allowed_parents, 
+ 681                           wrap_parent = None, 
+ 682                           wrap_lambda = None): 
+
     683          """ 
+ 684          helper for _fixup. Checks if a component is in allowed_parents, 
+ 685          otherwise wraps it in wrap_parent 
+ 686   
+ 687          :param allowed_parents: (tuple) classes that the component should be an 
+ 688              instance of 
+ 689          :param wrap_parent: the class to wrap the component in, if needed 
+ 690          :param wrap_lambda: lambda to use for wrapping, if needed 
+ 691   
+ 692          """ 
+ 693          components = [] 
+ 694          for c in self.components: 
+ 695              if isinstance(c, allowed_parents): 
+ 696                  pass 
+ 697              elif wrap_lambda: 
+ 698                  c = wrap_lambda(c) 
+ 699              else: 
+ 700                  c = wrap_parent(c) 
+ 701              if isinstance(c,DIV): 
+ 702                  c.parent = self 
+ 703              components.append(c) 
+ 704          self.components = components 
+
     705   
+
     706 -    def _postprocessing(self): 
+
     707          """ 
+ 708          Handling of attributes (normally the ones not prefixed with '_'). 
+ 709   
+ 710          Nothing to postprocess yet. May be overridden by subclasses 
+ 711          """ 
+ 712          return 
+
     713   
+
     714 -    def _traverse(self, status, hideerror=False): 
+
     715          # TODO: docstring 
+ 716          newstatus = status 
+ 717          for c in self.components: 
+ 718              if hasattr(c, '_traverse') and callable(c._traverse): 
+ 719                  c.vars = self.vars 
+ 720                  c.request_vars = self.request_vars 
+ 721                  c.errors = self.errors 
+ 722                  c.latest = self.latest 
+ 723                  c.session = self.session 
+ 724                  c.formname = self.formname 
+ 725                  c['hideerror']=hideerror 
+ 726                  newstatus = c._traverse(status,hideerror) and newstatus 
+ 727   
+ 728          # for input, textarea, select, option 
+ 729          # deal with 'value' and 'validation' 
+ 730   
+ 731          name = self['_name'] 
+ 732          if newstatus: 
+ 733              newstatus = self._validate() 
+ 734              self._postprocessing() 
+ 735          elif 'old_value' in self.attributes: 
+ 736              self['value'] = self['old_value'] 
+ 737              self._postprocessing() 
+ 738          elif name and name in self.vars: 
+ 739              self['value'] = self.vars[name] 
+ 740              self._postprocessing() 
+ 741          if name: 
+ 742              self.latest[name] = self['value'] 
+ 743          return newstatus 
+
     744   
+
     745 -    def _validate(self): 
+
     746          """ 
+ 747          nothing to validate yet. May be overridden by subclasses 
+ 748          """ 
+ 749          return True 
+
     750   
+
     751 -    def _setnode(self,value): 
+
     752          if isinstance(value,DIV): 
+ 753              value.parent = self 
+
     754   
+
     755 -    def _xml(self): 
+
     756          """ 
+ 757          helper for xml generation. Returns separately: 
+ 758          - the component attributes 
+ 759          - the generated xml of the inner components 
+ 760   
+ 761          Component attributes start with an underscore ('_') and 
+ 762          do not have a False or None value. The underscore is removed. 
+ 763          A value of True is replaced with the attribute name. 
+ 764   
+ 765          :returns: tuple: (attributes, components) 
+ 766          """ 
+ 767   
+ 768          # get the attributes for this component 
+ 769          # (they start with '_', others may have special meanings) 
+ 770          fa = '' 
+ 771          for key in sorted(self.attributes): 
+ 772              value = self[key] 
+ 773              if key[:1] != '_': 
+ 774                  continue 
+ 775              name = key[1:] 
+ 776              if value is True: 
+ 777                  value = name 
+ 778              elif value is False or value is None: 
+ 779                  continue 
+ 780              fa += ' %s="%s"' % (name, xmlescape(value, True)) 
+ 781   
+ 782          # get the xml for the inner components 
+ 783          co = join([xmlescape(component) for component in 
+ 784                       self.components]) 
+ 785   
+ 786          return (fa, co) 
+
     787   
+
     788 -    def xml(self): 
+
     789          """ 
+ 790          generates the xml for this component. 
+ 791          """ 
+ 792   
+ 793          (fa, co) = self._xml() 
+ 794   
+ 795          if not self.tag: 
+ 796              return co 
+ 797   
+ 798          if self.tag[-1:] == '/': 
+ 799              # <tag [attributes] /> 
+ 800              return '<%s%s />' % (self.tag[:-1], fa) 
+ 801   
+ 802          # else: <tag [attributes]>  inner components xml </tag> 
+ 803          return '<%s%s>%s</%s>' % (self.tag, fa, co, self.tag) 
+
     804   
+
     805 -    def __str__(self): 
+
     806          """ 
+ 807          str(COMPONENT) returns equals COMPONENT.xml() 
+ 808          """ 
+ 809   
+ 810          return self.xml() 
+
     811   
+
     812 -    def flatten(self, render=None): 
+
     813          """ 
+ 814          return the text stored by the DIV object rendered by the render function 
+ 815          the render function must take text, tagname, and attributes 
+ 816          render=None is equivalent to render=lambda text, tag, attr: text 
+ 817   
+ 818          >>> markdown = lambda text,tag=None,attributes={}: \ 
+ 819                          {None: re.sub('\s+',' ',text), \ 
+ 820                           'h1':'#'+text+'\\n\\n', \ 
+ 821                           'p':text+'\\n'}.get(tag,text) 
+ 822          >>> a=TAG('<h1>Header</h1><p>this is a     test</p>') 
+ 823          >>> a.flatten(markdown) 
+ 824          '#Header\\n\\nthis is a test\\n' 
+ 825          """ 
+ 826   
+ 827          text = '' 
+ 828          for c in self.components: 
+ 829              if isinstance(c,XmlComponent): 
+ 830                  s=c.flatten(render) 
+ 831              elif render: 
+ 832                  s=render(str(c)) 
+ 833              else: 
+ 834                  s=str(c) 
+ 835              text+=s 
+ 836          if render: 
+ 837              text = render(text,self.tag,self.attributes) 
+ 838          return text 
+
     839   
+ 840      regex_tag=re.compile('^[\w\-\:]+') 
+ 841      regex_id=re.compile('#([\w\-]+)') 
+ 842      regex_class=re.compile('\.([\w\-]+)') 
+ 843      regex_attr=re.compile('\[([\w\-\:]+)=(.*?)\]') 
+ 844   
+ 845   
+
     846 -    def elements(self, *args, **kargs): 
+
     847          """ 
+ 848          find all component that match the supplied attribute dictionary, 
+ 849          or None if nothing could be found 
+ 850   
+ 851          All components of the components are searched. 
+ 852   
+ 853          >>> a = DIV(DIV(SPAN('x'),3,DIV(SPAN('y')))) 
+ 854          >>> for c in a.elements('span',first_only=True): c[0]='z' 
+ 855          >>> print a 
+ 856          <div><div><span>z</span>3<div><span>y</span></div></div></div> 
+ 857          >>> for c in a.elements('span'): c[0]='z' 
+ 858          >>> print a 
+ 859          <div><div><span>z</span>3<div><span>z</span></div></div></div> 
+ 860   
+ 861          It also supports a syntax compatible with jQuery 
+ 862   
+ 863          >>> a=TAG('<div><span><a id="1-1" u:v=$>hello</a></span><p class="this is a test">world</p></div>') 
+ 864          >>> for e in a.elements('div a#1-1, p.is'): print e.flatten() 
+ 865          hello 
+ 866          world 
+ 867          >>> for e in a.elements('#1-1'): print e.flatten() 
+ 868          hello 
+ 869          >>> a.elements('a[u:v=$]')[0].xml() 
+ 870          '<a id="1-1" u:v="$">hello</a>' 
+ 871   
+ 872          >>> a=FORM( INPUT(_type='text'), SELECT(range(1)), TEXTAREA() ) 
+ 873          >>> for c in a.elements('input, select, textarea'): c['_disabled'] = 'disabled' 
+ 874          >>> a.xml() 
+ 875          '<form action="" enctype="multipart/form-data" method="post"><input disabled="disabled" type="text" /><select disabled="disabled"><option value="0">0</option></select><textarea cols="40" disabled="disabled" rows="10"></textarea></form>' 
+ 876          """ 
+ 877          if len(args)==1: 
+ 878              args = [a.strip() for a in args[0].split(',')] 
+ 879          if len(args)>1: 
+ 880              subset = [self.elements(a,**kargs) for a in args] 
+ 881              return reduce(lambda a,b:a+b,subset,[]) 
+ 882          elif len(args)==1: 
+ 883              items = args[0].split() 
+ 884              if len(items)>1: 
+ 885                  subset=[a.elements(' '.join(items[1:]),**kargs) for a in self.elements(items[0])] 
+ 886                  return reduce(lambda a,b:a+b,subset,[]) 
+ 887              else: 
+ 888                  item=items[0] 
+ 889                  if '#' in item or '.' in item or '[' in item: 
+ 890                      match_tag = self.regex_tag.search(item) 
+ 891                      match_id = self.regex_id.search(item) 
+ 892                      match_class = self.regex_class.search(item) 
+ 893                      match_attr = self.regex_attr.finditer(item) 
+ 894                      args = [] 
+ 895                      if match_tag: args = [match_tag.group()] 
+ 896                      if match_id: kargs['_id'] = match_id.group(1) 
+ 897                      if match_class: kargs['_class'] = re.compile('(?<!\w)%s(?!\w)' % \ 
+ 898                         match_class.group(1).replace('-','\\-').replace(':','\\:')) 
+ 899                      for item in match_attr: 
+ 900                          kargs['_'+item.group(1)]=item.group(2) 
+ 901                      return self.elements(*args,**kargs) 
+ 902          # make a copy of the components 
+ 903          matches = [] 
+ 904          first_only = False 
+ 905          if kargs.has_key("first_only"): 
+ 906              first_only = kargs["first_only"] 
+ 907              del kargs["first_only"] 
+ 908          # check if the component has an attribute with the same 
+ 909          # value as provided 
+ 910          check = True 
+ 911          tag = getattr(self,'tag').replace("/","") 
+ 912          if args and tag not in args: 
+ 913              check = False 
+ 914          for (key, value) in kargs.items(): 
+ 915              if isinstance(value,(str,int)): 
+ 916                  if self[key] != str(value): 
+ 917                      check = False 
+ 918              elif key in self.attributes: 
+ 919                  if not value.search(str(self[key])): 
+ 920                      check = False 
+ 921              else: 
+ 922                  check = False 
+ 923          if 'find' in kargs: 
+ 924              find = kargs['find'] 
+ 925              for c in self.components: 
+ 926                  if isinstance(find,(str,int)): 
+ 927                      if isinstance(c,str) and str(find) in c: 
+ 928                          check = True 
+ 929                  else: 
+ 930                      if isinstance(c,str) and find.search(c): 
+ 931                          check = True 
+ 932          # if found, return the component 
+ 933          if check: 
+ 934              matches.append(self) 
+ 935              if first_only: 
+ 936                  return matches 
+ 937          # loop the copy 
+ 938          for c in self.components: 
+ 939              if isinstance(c, XmlComponent): 
+ 940                  kargs['first_only'] = first_only 
+ 941                  child_matches = c.elements( *args,  **kargs ) 
+ 942                  if first_only  and len(child_matches) != 0: 
+ 943                      return child_matches 
+ 944                  matches.extend( child_matches ) 
+ 945          return matches 
+
     946   
+ 947   
+
     948 -    def element(self, *args, **kargs): 
+
     949          """ 
+ 950          find the first component that matches the supplied attribute dictionary, 
+ 951          or None if nothing could be found 
+ 952   
+ 953          Also the components of the components are searched. 
+ 954          """ 
+ 955          kargs['first_only'] = True 
+ 956          elements = self.elements(*args, **kargs) 
+ 957          if not elements: 
+ 958              # we found nothing 
+ 959              return None 
+ 960          return elements[0] 
+
     961   
+
     962 -    def siblings(self,*args,**kargs): 
+
     963          """ 
+ 964          find all sibling components that match the supplied argument list 
+ 965          and attribute dictionary, or None if nothing could be found 
+ 966          """ 
+ 967          sibs = [s for s in self.parent.components if not s == self] 
+ 968          matches = [] 
+ 969          first_only = False 
+ 970          if kargs.has_key("first_only"): 
+ 971              first_only = kargs["first_only"] 
+ 972              del kargs["first_only"] 
+ 973          for c in sibs: 
+ 974              try: 
+ 975                  check = True 
+ 976                  tag = getattr(c,'tag').replace("/","") 
+ 977                  if args and tag not in args: 
+ 978                          check = False 
+ 979                  for (key, value) in kargs.items(): 
+ 980                      if c[key] != value: 
+ 981                              check = False 
+ 982                  if check: 
+ 983                      matches.append(c) 
+ 984                      if first_only: break 
+ 985              except: 
+ 986                  pass 
+ 987          return matches 
+
     988   
+
     989 -    def sibling(self,*args,**kargs): 
+
     990          """ 
+ 991          find the first sibling component that match the supplied argument list 
+ 992          and attribute dictionary, or None if nothing could be found 
+ 993          """ 
+ 994          kargs['first_only'] = True 
+ 995          sibs = self.siblings(*args, **kargs) 
+ 996          if not sibs: 
+ 997              return None 
+ 998          return sibs[0] 
+
     999   
+
    1000 -class CAT(DIV): 
+
    1001       
+1002      tag = '' 
+
    1003   
+
    1004 -def TAG_unpickler(data): 
+
    1005      return cPickle.loads(data) 
+
    1006   
+
    1007 -def TAG_pickler(data): 
+
    1008      d = DIV() 
+1009      d.__dict__ = data.__dict__ 
+1010      marshal_dump = cPickle.dumps(d) 
+1011      return (TAG_unpickler, (marshal_dump,)) 
+
    1012   
+
    1013 -class __TAG__(XmlComponent): 
+
    1014   
+1015      """ 
+1016      TAG factory example:: 
+1017   
+1018          >>> print TAG.first(TAG.second('test'), _key = 3) 
+1019          <first key=\"3\"><second>test</second></first> 
+1020   
+1021      """ 
+1022   
+
    1023 -    def __getitem__(self, name): 
+
    1024          return self.__getattr__(name) 
+
    1025   
+
    1026 -    def __getattr__(self, name): 
+
    1027          if name[-1:] == '_': 
+1028              name = name[:-1] + '/' 
+1029          if isinstance(name,unicode): 
+1030              name = name.encode('utf-8') 
+1031          class __tag__(DIV): 
+1032              tag = name 
+
    1033          copy_reg.pickle(__tag__, TAG_pickler, TAG_unpickler) 
+1034          return lambda *a, **b: __tag__(*a, **b) 
+
    1035   
+
    1036 -    def __call__(self,html): 
+
    1037          return web2pyHTMLParser(decoder.decoder(html)).tree 
+
    1038   
+1039  TAG = __TAG__() 
+1040   
+1041   
+
    1042 -class HTML(DIV): 
+
    1043      """ 
+1044      There are four predefined document type definitions. 
+1045      They can be specified in the 'doctype' parameter: 
+1046   
+1047      -'strict' enables strict doctype 
+1048      -'transitional' enables transitional doctype (default) 
+1049      -'frameset' enables frameset doctype 
+1050      -'html5' enables HTML 5 doctype 
+1051      -any other string will be treated as user's own doctype 
+1052   
+1053      'lang' parameter specifies the language of the document. 
+1054      Defaults to 'en'. 
+1055   
+1056      See also :class:`DIV` 
+1057      """ 
+1058   
+1059      tag = 'html' 
+1060   
+1061      strict = '<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">\n' 
+1062      transitional = '<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">\n' 
+1063      frameset = '<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Frameset//EN" "http://www.w3.org/TR/html4/frameset.dtd">\n' 
+1064      html5 = '<!DOCTYPE HTML>\n' 
+1065   
+
    1066 -    def xml(self): 
+
    1067          lang = self['lang'] 
+1068          if not lang: 
+1069              lang = 'en' 
+1070          self.attributes['_lang'] = lang 
+1071          doctype = self['doctype'] 
+1072          if doctype: 
+1073              if doctype == 'strict': 
+1074                  doctype = self.strict 
+1075              elif doctype == 'transitional': 
+1076                  doctype = self.transitional 
+1077              elif doctype == 'frameset': 
+1078                  doctype = self.frameset 
+1079              elif doctype == 'html5': 
+1080                  doctype = self.html5 
+1081              else: 
+1082                  doctype = '%s\n' % doctype 
+1083          else: 
+1084              doctype = self.transitional 
+1085          (fa, co) = self._xml() 
+1086          return '%s<%s%s>%s</%s>' % (doctype, self.tag, fa, co, self.tag) 
+
    1087   
+
    1088 -class XHTML(DIV): 
+
    1089      """ 
+1090      This is XHTML version of the HTML helper. 
+1091   
+1092      There are three predefined document type definitions. 
+1093      They can be specified in the 'doctype' parameter: 
+1094   
+1095      -'strict' enables strict doctype 
+1096      -'transitional' enables transitional doctype (default) 
+1097      -'frameset' enables frameset doctype 
+1098      -any other string will be treated as user's own doctype 
+1099   
+1100      'lang' parameter specifies the language of the document and the xml document. 
+1101      Defaults to 'en'. 
+1102   
+1103      'xmlns' parameter specifies the xml namespace. 
+1104      Defaults to 'http://www.w3.org/1999/xhtml'. 
+1105   
+1106      See also :class:`DIV` 
+1107      """ 
+1108   
+1109      tag = 'html' 
+1110   
+1111      strict = '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">\n' 
+1112      transitional = '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">\n' 
+1113      frameset = '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Frameset//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-frameset.dtd">\n' 
+1114      xmlns = 'http://www.w3.org/1999/xhtml' 
+1115   
+
    1116 -    def xml(self): 
+
    1117          xmlns = self['xmlns'] 
+1118          if xmlns: 
+1119              self.attributes['_xmlns'] = xmlns 
+1120          else: 
+1121              self.attributes['_xmlns'] = self.xmlns 
+1122          lang = self['lang'] 
+1123          if not lang: 
+1124              lang = 'en' 
+1125          self.attributes['_lang'] = lang 
+1126          self.attributes['_xml:lang'] = lang 
+1127          doctype = self['doctype'] 
+1128          if doctype: 
+1129              if doctype == 'strict': 
+1130                  doctype = self.strict 
+1131              elif doctype == 'transitional': 
+1132                  doctype = self.transitional 
+1133              elif doctype == 'frameset': 
+1134                  doctype = self.frameset 
+1135              else: 
+1136                  doctype = '%s\n' % doctype 
+1137          else: 
+1138              doctype = self.transitional 
+1139          (fa, co) = self._xml() 
+1140          return '%s<%s%s>%s</%s>' % (doctype, self.tag, fa, co, self.tag) 
+
    1141   
+1142   
+
    1143 -class HEAD(DIV): 
+
    1144   
+1145      tag = 'head' 
+
    1146   
+
    1147 -class TITLE(DIV): 
+
    1148   
+1149      tag = 'title' 
+
    1150   
+1151   
+
    1152 -class META(DIV): 
+
    1153   
+1154      tag = 'meta/' 
+
    1155   
+1156   
+1160   
+1161   
+
    1162 -class SCRIPT(DIV): 
+
    1163   
+1164      tag = 'script' 
+1165   
+
    1166 -    def xml(self): 
+
    1167          (fa, co) = self._xml() 
+1168          # no escaping of subcomponents 
+1169          co = '\n'.join([str(component) for component in 
+1170                         self.components]) 
+1171          if co: 
+1172              # <script [attributes]><!--//--><![CDATA[//><!-- 
+1173              # script body 
+1174              # //--><!]]></script> 
+1175              # return '<%s%s><!--//--><![CDATA[//><!--\n%s\n//--><!]]></%s>' % (self.tag, fa, co, self.tag) 
+1176              return '<%s%s><!--\n%s\n//--></%s>' % (self.tag, fa, co, self.tag) 
+1177          else: 
+1178              return DIV.xml(self) 
+
    1179   
+1180   
+
    1181 -class STYLE(DIV): 
+
    1182   
+1183      tag = 'style' 
+1184   
+
    1185 -    def xml(self): 
+
    1186          (fa, co) = self._xml() 
+1187          # no escaping of subcomponents 
+1188          co = '\n'.join([str(component) for component in 
+1189                         self.components]) 
+1190          if co: 
+1191              # <style [attributes]><!--/*--><![CDATA[/*><!--*/ 
+1192              # style body 
+1193              # /*]]>*/--></style> 
+1194              return '<%s%s><!--/*--><![CDATA[/*><!--*/\n%s\n/*]]>*/--></%s>' % (self.tag, fa, co, self.tag) 
+1195          else: 
+1196              return DIV.xml(self) 
+
    1197   
+1198   
+
    1199 -class IMG(DIV): 
+
    1200   
+1201      tag = 'img/' 
+
    1202   
+1203   
+
    1204 -class SPAN(DIV): 
+
    1205   
+1206      tag = 'span' 
+
    1207   
+1208   
+
    1209 -class BODY(DIV): 
+
    1210   
+1211      tag = 'body' 
+
    1212   
+1213   
+
    1214 -class H1(DIV): 
+
    1215   
+1216      tag = 'h1' 
+
    1217   
+1218   
+
    1219 -class H2(DIV): 
+
    1220   
+1221      tag = 'h2' 
+
    1222   
+1223   
+
    1224 -class H3(DIV): 
+
    1225   
+1226      tag = 'h3' 
+
    1227   
+1228   
+
    1229 -class H4(DIV): 
+
    1230   
+1231      tag = 'h4' 
+
    1232   
+1233   
+
    1234 -class H5(DIV): 
+
    1235   
+1236      tag = 'h5' 
+
    1237   
+1238   
+
    1239 -class H6(DIV): 
+
    1240   
+1241      tag = 'h6' 
+
    1242   
+1243   
+
    1244 -class P(DIV): 
+
    1245      """ 
+1246      Will replace ``\\n`` by ``<br />`` if the `cr2br` attribute is provided. 
+1247   
+1248      see also :class:`DIV` 
+1249      """ 
+1250   
+1251      tag = 'p' 
+1252   
+
    1253 -    def xml(self): 
+
    1254          text = DIV.xml(self) 
+1255          if self['cr2br']: 
+1256              text = text.replace('\n', '<br />') 
+1257          return text 
+
    1258   
+1259   
+
    1260 -class B(DIV): 
+
    1261   
+1262      tag = 'b' 
+
    1263   
+1264   
+
    1265 -class BR(DIV): 
+
    1266   
+1267      tag = 'br/' 
+
    1268   
+1269   
+
    1270 -class HR(DIV): 
+
    1271   
+1272      tag = 'hr/' 
+
    1273   
+1274   
+
    1275 -class A(DIV): 
+
    1276   
+1277      tag = 'a' 
+1278   
+
    1279 -    def xml(self): 
+
    1280          if self['callback']: 
+1281              self['_onclick']="ajax('%s',[],'%s');return false;" % \ 
+1282                  (self['callback'],self['target'] or '') 
+1283              self['_href'] = self['_href'] or '#null' 
+1284          elif self['cid']: 
+1285              self['_onclick']='web2py_component("%s","%s");return false;' % \ 
+1286                  (self['_href'],self['cid']) 
+1287          return DIV.xml(self) 
+
    1288   
+1289   
+
    1290 -class BUTTON(DIV): 
+
    1291       
+1292      tag = 'button' 
+
    1293   
+1294   
+
    1295 -class EM(DIV): 
+
    1296   
+1297      tag = 'em' 
+
    1298   
+1299   
+
    1300 -class EMBED(DIV): 
+
    1301   
+1302      tag = 'embed/' 
+
    1303   
+1304   
+
    1305 -class TT(DIV): 
+
    1306   
+1307      tag = 'tt' 
+
    1308   
+1309   
+
    1310 -class PRE(DIV): 
+
    1311   
+1312      tag = 'pre' 
+
    1313   
+1314   
+
    1315 -class CENTER(DIV): 
+
    1316   
+1317      tag = 'center' 
+
    1318   
+1319   
+
    1320 -class CODE(DIV): 
+
    1321   
+1322      """ 
+1323      displays code in HTML with syntax highlighting. 
+1324   
+1325      :param attributes: optional attributes: 
+1326   
+1327          - language: indicates the language, otherwise PYTHON is assumed 
+1328          - link: can provide a link 
+1329          - styles: for styles 
+1330   
+1331      Example:: 
+1332   
+1333          {{=CODE(\"print 'hello world'\", language='python', link=None, 
+1334              counter=1, styles={}, highlight_line=None)}} 
+1335   
+1336   
+1337      supported languages are \"python\", \"html_plain\", \"c\", \"cpp\", 
+1338      \"web2py\", \"html\". 
+1339      The \"html\" language interprets {{ and }} tags as \"web2py\" code, 
+1340      \"html_plain\" doesn't. 
+1341   
+1342      if a link='/examples/global/vars/' is provided web2py keywords are linked to 
+1343      the online docs. 
+1344   
+1345      the counter is used for line numbering, counter can be None or a prompt 
+1346      string. 
+1347      """ 
+1348   
+
    1349 -    def xml(self): 
+
    1350          language = self['language'] or 'PYTHON' 
+1351          link = self['link'] 
+1352          counter = self.attributes.get('counter', 1) 
+1353          highlight_line = self.attributes.get('highlight_line', None) 
+1354          styles = self['styles'] or {} 
+1355          return highlight( 
+1356              join(self.components), 
+1357              language=language, 
+1358              link=link, 
+1359              counter=counter, 
+1360              styles=styles, 
+1361              attributes=self.attributes, 
+1362              highlight_line=highlight_line, 
+1363              ) 
+
    1364   
+1365   
+
    1366 -class LABEL(DIV): 
+
    1367   
+1368      tag = 'label' 
+
    1369   
+1370   
+
    1371 -class LI(DIV): 
+
    1372   
+1373      tag = 'li' 
+
    1374   
+1375   
+
    1376 -class UL(DIV): 
+
    1377      """ 
+1378      UL Component. 
+1379   
+1380      If subcomponents are not LI-components they will be wrapped in a LI 
+1381   
+1382      see also :class:`DIV` 
+1383      """ 
+1384   
+1385      tag = 'ul' 
+1386   
+
    1387 -    def _fixup(self): 
+
    1388          self._wrap_components(LI, LI) 
+
    1389   
+1390   
+
    1391 -class OL(UL): 
+
    1392   
+1393      tag = 'ol' 
+
    1394   
+1395   
+
    1396 -class TD(DIV): 
+
    1397   
+1398      tag = 'td' 
+
    1399   
+1400   
+
    1401 -class TH(DIV): 
+
    1402   
+1403      tag = 'th' 
+
    1404   
+1405   
+
    1406 -class TR(DIV): 
+
    1407      """ 
+1408      TR Component. 
+1409   
+1410      If subcomponents are not TD/TH-components they will be wrapped in a TD 
+1411   
+1412      see also :class:`DIV` 
+1413      """ 
+1414   
+1415      tag = 'tr' 
+1416   
+
    1417 -    def _fixup(self): 
+
    1418          self._wrap_components((TD, TH), TD) 
+
    1419   
+
    1420 -class THEAD(DIV): 
+
    1421   
+1422      tag = 'thead' 
+1423   
+
    1424 -    def _fixup(self): 
+
    1425          self._wrap_components(TR, TR) 
+
    1426   
+1427   
+
    1428 -class TBODY(DIV): 
+
    1429   
+1430      tag = 'tbody' 
+1431   
+
    1432 -    def _fixup(self): 
+
    1433          self._wrap_components(TR, TR) 
+
    1434   
+1435   
+
    1436 -class TFOOT(DIV): 
+
    1437   
+1438      tag = 'tfoot' 
+1439   
+
    1440 -    def _fixup(self): 
+
    1441          self._wrap_components(TR, TR) 
+
    1442   
+1443   
+
    1444 -class COL(DIV): 
+
    1445   
+1446      tag = 'col' 
+
    1447   
+1448   
+
    1449 -class COLGROUP(DIV): 
+
    1450   
+1451      tag = 'colgroup' 
+
    1452   
+1453   
+
    1454 -class TABLE(DIV): 
+
    1455      """ 
+1456      TABLE Component. 
+1457   
+1458      If subcomponents are not TR/TBODY/THEAD/TFOOT-components 
+1459      they will be wrapped in a TR 
+1460   
+1461      see also :class:`DIV` 
+1462      """ 
+1463   
+1464      tag = 'table' 
+1465   
+
    1466 -    def _fixup(self): 
+
    1468   
+
    1469 -class I(DIV): 
+
    1470   
+1471      tag = 'i' 
+
    1472   
+
    1473 -class IFRAME(DIV): 
+
    1474   
+1475      tag = 'iframe' 
+
    1476   
+1477   
+
    1478 -class INPUT(DIV): 
+
    1479   
+1480      """ 
+1481          INPUT Component 
+1482   
+1483          examples:: 
+1484   
+1485              >>> INPUT(_type='text', _name='name', value='Max').xml() 
+1486              '<input name=\"name\" type=\"text\" value=\"Max\" />' 
+1487   
+1488              >>> INPUT(_type='checkbox', _name='checkbox', value='on').xml() 
+1489              '<input checked=\"checked\" name=\"checkbox\" type=\"checkbox\" value=\"on\" />' 
+1490   
+1491              >>> INPUT(_type='radio', _name='radio', _value='yes', value='yes').xml() 
+1492              '<input checked=\"checked\" name=\"radio\" type=\"radio\" value=\"yes\" />' 
+1493   
+1494              >>> INPUT(_type='radio', _name='radio', _value='no', value='yes').xml() 
+1495              '<input name=\"radio\" type=\"radio\" value=\"no\" />' 
+1496   
+1497          the input helper takes two special attributes value= and requires=. 
+1498   
+1499          :param value: used to pass the initial value for the input field. 
+1500              value differs from _value because it works for checkboxes, radio, 
+1501              textarea and select/option too. 
+1502   
+1503              - for a checkbox value should be '' or 'on'. 
+1504              - for a radio or select/option value should be the _value 
+1505                  of the checked/selected item. 
+1506   
+1507          :param requires: should be None, or a validator or a list of validators 
+1508              for the value of the field. 
+1509          """ 
+1510   
+1511      tag = 'input/' 
+1512   
+
    1513 -    def _validate(self): 
+
    1514   
+1515          # # this only changes value, not _value 
+1516   
+1517          name = self['_name'] 
+1518          if name is None or name == '': 
+1519              return True 
+1520          name = str(name) 
+1521   
+1522          if self['_type'] != 'checkbox': 
+1523              self['old_value'] = self['value'] or self['_value'] or '' 
+1524              value = self.request_vars.get(name, '') 
+1525              self['value'] = value 
+1526          else: 
+1527              self['old_value'] = self['value'] or False 
+1528              value = self.request_vars.get(name) 
+1529              if isinstance(value, (tuple, list)): 
+1530                  self['value'] = self['_value'] in value 
+1531              else: 
+1532                  self['value'] = self['_value'] == value 
+1533          requires = self['requires'] 
+1534          if requires: 
+1535              if not isinstance(requires, (list, tuple)): 
+1536                  requires = [requires] 
+1537              for validator in requires: 
+1538                  (value, errors) = validator(value) 
+1539                  if errors != None: 
+1540                      self.vars[name] = value 
+1541                      self.errors[name] = errors 
+1542                      break 
+1543          if not name in self.errors: 
+1544              self.vars[name] = value 
+1545              return True 
+1546          return False 
+
    1547   
+
    1548 -    def _postprocessing(self): 
+
    1549          t = self['_type'] 
+1550          if not t: 
+1551              t = self['_type'] = 'text' 
+1552          t = t.lower() 
+1553          value = self['value'] 
+1554          if self['_value'] == None: 
+1555              _value = None 
+1556          else: 
+1557              _value = str(self['_value']) 
+1558          if t == 'checkbox': 
+1559              if not _value: 
+1560                  _value = self['_value'] = 'on' 
+1561              if not value: 
+1562                  value = [] 
+1563              elif value is True: 
+1564                  value = [_value] 
+1565              elif not isinstance(value,(list,tuple)): 
+1566                  value = str(value).split('|') 
+1567              self['_checked'] = _value in value and 'checked' or None 
+1568          elif t == 'radio': 
+1569              if str(value) == str(_value): 
+1570                  self['_checked'] = 'checked' 
+1571              else: 
+1572                  self['_checked'] = None 
+1573          elif t == 'text' or t == 'hidden': 
+1574              if value != None: 
+1575                  self['_value'] = value 
+1576              else: 
+1577                  self['value'] = _value 
+
    1578   
+
    1579 -    def xml(self): 
+
    1580          name = self.attributes.get('_name', None) 
+1581          if name and hasattr(self, 'errors') \ 
+1582                  and self.errors.get(name, None) \ 
+1583                  and self['hideerror'] != True: 
+1584              return DIV.xml(self) + DIV(self.errors[name], _class='error', 
+1585                  errors=None, _id='%s__error' % name).xml() 
+1586          else: 
+1587              return DIV.xml(self) 
+
    1588   
+1589   
+
    1590 -class TEXTAREA(INPUT): 
+
    1591   
+1592      """ 
+1593      example:: 
+1594   
+1595          TEXTAREA(_name='sometext', value='blah '*100, requires=IS_NOT_EMPTY()) 
+1596   
+1597      'blah blah blah ...' will be the content of the textarea field. 
+1598      """ 
+1599   
+1600      tag = 'textarea' 
+1601   
+
    1602 -    def _postprocessing(self): 
+
    1603          if not '_rows' in self.attributes: 
+1604              self['_rows'] = 10 
+1605          if not '_cols' in self.attributes: 
+1606              self['_cols'] = 40 
+1607          if self['value'] != None: 
+1608              self.components = [self['value']] 
+1609          elif self.components: 
+1610              self['value'] = self.components[0] 
+
    1611   
+1612   
+
    1613 -class OPTION(DIV): 
+
    1614   
+1615      tag = 'option' 
+1616   
+
    1617 -    def _fixup(self): 
+
    1618          if not '_value' in self.attributes: 
+1619              self.attributes['_value'] = str(self.components[0]) 
+
    1620   
+1621   
+
    1622 -class OBJECT(DIV): 
+
    1623   
+1624      tag = 'object' 
+
    1625   
+
    1626 -class OPTGROUP(DIV): 
+
    1627   
+1628      tag = 'optgroup' 
+1629   
+
    1630 -    def _fixup(self): 
+
    1631          components = [] 
+1632          for c in self.components: 
+1633              if isinstance(c, OPTION): 
+1634                  components.append(c) 
+1635              else: 
+1636                  components.append(OPTION(c, _value=str(c))) 
+1637          self.components = components 
+
    1638   
+1639   
+
    1640 -class SELECT(INPUT): 
+
    1641   
+1642      """ 
+1643      example:: 
+1644   
+1645          >>> from validators import IS_IN_SET 
+1646          >>> SELECT('yes', 'no', _name='selector', value='yes', 
+1647          ...    requires=IS_IN_SET(['yes', 'no'])).xml() 
+1648          '<select name=\"selector\"><option selected=\"selected\" value=\"yes\">yes</option><option value=\"no\">no</option></select>' 
+1649   
+1650      """ 
+1651   
+1652      tag = 'select' 
+1653   
+
    1654 -    def _fixup(self): 
+
    1655          components = [] 
+1656          for c in self.components: 
+1657              if isinstance(c, (OPTION, OPTGROUP)): 
+1658                  components.append(c) 
+1659              else: 
+1660                  components.append(OPTION(c, _value=str(c))) 
+1661          self.components = components 
+
    1662   
+
    1663 -    def _postprocessing(self): 
+
    1664          component_list = [] 
+1665          for c in self.components: 
+1666              if isinstance(c, OPTGROUP): 
+1667                  component_list.append(c.components) 
+1668              else: 
+1669                  component_list.append([c]) 
+1670          options = itertools.chain(*component_list) 
+1671   
+1672          value = self['value'] 
+1673          if value != None: 
+1674              if not self['_multiple']: 
+1675                  for c in options: # my patch 
+1676                      if value and str(c['_value'])==str(value): 
+1677                          c['_selected'] = 'selected' 
+1678                      else: 
+1679                          c['_selected'] = None 
+1680              else: 
+1681                  if isinstance(value,(list,tuple)): 
+1682                      values = [str(item) for item in value] 
+1683                  else: 
+1684                      values = [str(value)] 
+1685                  for c in options: # my patch 
+1686                      if value and str(c['_value']) in values: 
+1687                          c['_selected'] = 'selected' 
+1688                      else: 
+1689                          c['_selected'] = None 
+
    1690   
+1691   
+
    1692 -class FIELDSET(DIV): 
+
    1693   
+1694      tag = 'fieldset' 
+
    1695   
+1696   
+
    1697 -class LEGEND(DIV): 
+
    1698   
+1699      tag = 'legend' 
+
    1700   
+1701   
+
    1702 -class FORM(DIV): 
+
    1703   
+1704      """ 
+1705      example:: 
+1706   
+1707          >>> from validators import IS_NOT_EMPTY 
+1708          >>> form=FORM(INPUT(_name=\"test\", requires=IS_NOT_EMPTY())) 
+1709          >>> form.xml() 
+1710          '<form action=\"\" enctype=\"multipart/form-data\" method=\"post\"><input name=\"test\" type=\"text\" /></form>' 
+1711   
+1712      a FORM is container for INPUT, TEXTAREA, SELECT and other helpers 
+1713   
+1714      form has one important method:: 
+1715   
+1716          form.accepts(request.vars, session) 
+1717   
+1718      if form is accepted (and all validators pass) form.vars contains the 
+1719      accepted vars, otherwise form.errors contains the errors. 
+1720      in case of errors the form is modified to present the errors to the user. 
+1721      """ 
+1722   
+1723      tag = 'form' 
+1724   
+
    1725 -    def __init__(self, *components, **attributes): 
+
    1726          DIV.__init__(self, *components,  **attributes) 
+1727          self.vars = Storage() 
+1728          self.errors = Storage() 
+1729          self.latest = Storage() 
+
    1730   
+
    1731 -    def accepts( 
+1732          self, 
+1733          vars, 
+1734          session=None, 
+1735          formname='default', 
+1736          keepvalues=False, 
+1737          onvalidation=None, 
+1738          hideerror=False, 
+1739          ): 
+
    1740          if vars.__class__.__name__ == 'Request': 
+1741              vars=vars.post_vars 
+1742          self.errors.clear() 
+1743          self.request_vars = Storage() 
+1744          self.request_vars.update(vars) 
+1745          self.session = session 
+1746          self.formname = formname 
+1747          self.keepvalues = keepvalues 
+1748   
+1749          # if this tag is a form and we are in accepting mode (status=True) 
+1750          # check formname and formkey 
+1751   
+1752          status = True 
+1753          if self.session: 
+1754              formkey = self.session.get('_formkey[%s]' % self.formname, None) 
+1755              # check if user tampering with form and void CSRF 
+1756              if formkey != self.request_vars._formkey: 
+1757                  status = False 
+1758          if self.formname != self.request_vars._formname: 
+1759              status = False 
+1760          if status and self.session: 
+1761              # check if editing a record that has been modified by the server 
+1762              if hasattr(self,'record_hash') and self.record_hash != formkey: 
+1763                  status = False 
+1764                  self.record_changed = True 
+1765          status = self._traverse(status,hideerror) 
+1766          if onvalidation: 
+1767              if isinstance(onvalidation, dict): 
+1768                  onsuccess = onvalidation.get('onsuccess', None) 
+1769                  onfailure = onvalidation.get('onfailure', None) 
+1770                  if onsuccess and status: 
+1771                      onsuccess(self) 
+1772                  if onfailure and vars and not status: 
+1773                      onfailure(self) 
+1774                      status = len(self.errors) == 0 
+1775              elif status: 
+1776                  if isinstance(onvalidation, (list, tuple)): 
+1777                      [f(self) for f in onvalidation] 
+1778                  else: 
+1779                      onvalidation(self) 
+1780          if self.errors: 
+1781              status = False 
+1782          if session != None: 
+1783              if hasattr(self,'record_hash'): 
+1784                  formkey = self.record_hash 
+1785              else: 
+1786                  formkey = web2py_uuid() 
+1787              self.formkey = session['_formkey[%s]' % formname] = formkey 
+1788          if status and not keepvalues: 
+1789              self._traverse(False,hideerror) 
+1790          return status 
+
    1791   
+
    1792 -    def _postprocessing(self): 
+
    1793          if not '_action' in self.attributes: 
+1794              self['_action'] = '' 
+1795          if not '_method' in self.attributes: 
+1796              self['_method'] = 'post' 
+1797          if not '_enctype' in self.attributes: 
+1798              self['_enctype'] = 'multipart/form-data' 
+
    1799   
+
    1800 -    def hidden_fields(self): 
+
    1801          c = [] 
+1802          if 'hidden' in self.attributes: 
+1803              for (key, value) in self.attributes.get('hidden',{}).items(): 
+1804                  c.append(INPUT(_type='hidden', _name=key, _value=value)) 
+1805   
+1806          if hasattr(self, 'formkey') and self.formkey: 
+1807              c.append(INPUT(_type='hidden', _name='_formkey', 
+1808                       _value=self.formkey)) 
+1809          if hasattr(self, 'formname') and self.formname: 
+1810              c.append(INPUT(_type='hidden', _name='_formname', 
+1811                       _value=self.formname)) 
+1812          return DIV(c, _class="hidden") 
+
    1813   
+
    1814 -    def xml(self): 
+
    1815          newform = FORM(*self.components, **self.attributes) 
+1816          hidden_fields = self.hidden_fields() 
+1817          if hidden_fields.components: 
+1818              newform.append(hidden_fields) 
+1819          return DIV.xml(newform) 
+
    1820   
+
    1821 -    def validate(self,  
+1822                   values=None, 
+1823                   session=None,  
+1824                   formname='default', 
+1825                   keepvalues=False, 
+1826                   onvalidation=None, 
+1827                   hideerror=False, 
+1828                   onsuccess='flash', 
+1829                   onfailure='flash', 
+1830                   message_onsuccess=None,  
+1831                   message_onfailure=None,  
+1832                   ): 
+
    1833          """ 
+1834          This function validates the form,  
+1835          you can use it instead of directly form.accepts. 
+1836   
+1837          Usage: 
+1838          In controller 
+1839   
+1840          def action(): 
+1841              form=FORM(INPUT(_name=\"test\", requires=IS_NOT_EMPTY())) 
+1842              form.validate() #you can pass some args here - see below 
+1843              return dict(form=form) 
+1844   
+1845          This can receive a bunch of arguments         
+1846   
+1847          onsuccess = 'flash' - will show message_onsuccess in response.flash 
+1848                      None - will do nothing 
+1849                      can be a function (lambda form: pass) 
+1850          onfailure = 'flash' - will show message_onfailure in response.flash 
+1851                      None - will do nothing 
+1852                      can be a function (lambda form: pass) 
+1853   
+1854          values = values to test the validation - dictionary, response.vars, session or other - Default to (request.vars, session) 
+1855          message_onsuccess 
+1856          message_onfailure 
+1857          """ 
+1858          from gluon import current 
+1859          if not session: session = current.session 
+1860          if not values: values = current.request.post_vars 
+1861            
+1862          message_onsuccess = message_onsuccess or current.T("Success!") 
+1863          message_onfailure = message_onfailure or \ 
+1864              current.T("Errors in form, please check it out.") 
+1865   
+1866          if self.accepts(values, session): 
+1867              if onsuccess == 'flash': 
+1868                  current.response.flash = message_onsuccess 
+1869              elif callable(onsuccess): 
+1870                  onsuccess(self) 
+1871              return True 
+1872          elif self.errors: 
+1873              if onfailure == 'flash': 
+1874                  current.response.flash = message_onfailure 
+1875              elif callable(onfailure): 
+1876                  onfailure(self) 
+1877              return False 
+
    1878   
+
    1879 -    def process(self, values=None, session=None, **args): 
+
    1880          """ 
+1881          Perform the .validate() method but returns the form 
+1882   
+1883          Usage in controllers: 
+1884          # directly on return 
+1885          def action(): 
+1886              #some code here 
+1887              return dict(form=FORM(...).process(...)) 
+1888   
+1889          You can use it with FORM, SQLFORM or FORM based plugins 
+1890   
+1891          Examples: 
+1892          #response.flash messages 
+1893          def action(): 
+1894              form = SQLFORM(db.table).process(message_onsuccess='Sucess!') 
+1895              retutn dict(form=form) 
+1896   
+1897          # callback function 
+1898          # callback receives True or False as first arg, and a list of args. 
+1899          def my_callback(status, msg): 
+1900             response.flash = "Success! "+msg if status else "Errors occured" 
+1901   
+1902          # after argument can be 'flash' to response.flash messages 
+1903          # or a function name to use as callback or None to do nothing. 
+1904          def action(): 
+1905              return dict(form=SQLFORM(db.table).process(onsuccess=my_callback) 
+1906          """  
+1907          self.validate(values=values, session=session, **args) 
+1908          return self 
+
    1909   
+1910   
+
    1911 -class BEAUTIFY(DIV): 
+
    1912   
+1913      """ 
+1914      example:: 
+1915   
+1916          >>> BEAUTIFY(['a', 'b', {'hello': 'world'}]).xml() 
+1917          '<div><table><tr><td><div>a</div></td></tr><tr><td><div>b</div></td></tr><tr><td><div><table><tr><td style="font-weight:bold;">hello</td><td valign="top">:</td><td><div>world</div></td></tr></table></div></td></tr></table></div>' 
+1918   
+1919      turns any list, dictionary, etc into decent looking html. 
+1920      Two special attributes are 
+1921      :sorted: a function that takes the dict and returned sorted keys 
+1922      :keyfilter: a funciton that takes a key and returns its representation 
+1923                  or None if the key is to be skipped. By default key[:1]=='_' is skipped. 
+1924      """ 
+1925   
+1926      tag = 'div' 
+1927   
+1928      @staticmethod 
+
    1929 -    def no_underscore(key): 
+
    1930          if key[:1]=='_': 
+1931              return None 
+1932          return key 
+
    1933   
+
    1934 -    def __init__(self, component, **attributes): 
+
    1935          self.components = [component] 
+1936          self.attributes = attributes 
+1937          sorter = attributes.get('sorted',sorted) 
+1938          keyfilter = attributes.get('keyfilter',BEAUTIFY.no_underscore) 
+1939          components = [] 
+1940          attributes = copy.copy(self.attributes) 
+1941          level = attributes['level'] = attributes.get('level',6) - 1 
+1942          if '_class' in attributes: 
+1943              attributes['_class'] += 'i' 
+1944          if level == 0: 
+1945              return 
+1946          for c in self.components: 
+1947              if hasattr(c,'xml') and callable(c.xml): 
+1948                  components.append(c) 
+1949                  continue 
+1950              elif hasattr(c,'keys') and callable(c.keys): 
+1951                  rows = [] 
+1952                  try: 
+1953                      keys = (sorter and sorter(c)) or c 
+1954                      for key in keys: 
+1955                          if isinstance(key,(str,unicode)) and keyfilter: 
+1956                              filtered_key = keyfilter(key) 
+1957                          else: 
+1958                              filtered_key = str(key) 
+1959                          if filtered_key is None: 
+1960                              continue 
+1961                          value = c[key] 
+1962                          if type(value) == types.LambdaType: 
+1963                              continue 
+1964                          rows.append(TR(TD(filtered_key, _style='font-weight:bold;'), 
+1965                                         TD(':',_valign='top'), 
+1966                                         TD(BEAUTIFY(value, **attributes)))) 
+1967                      components.append(TABLE(*rows, **attributes)) 
+1968                      continue 
+1969                  except: 
+1970                      pass 
+1971              if isinstance(c, str): 
+1972                  components.append(str(c)) 
+1973              elif isinstance(c, unicode): 
+1974                  components.append(c.encode('utf8')) 
+1975              elif isinstance(c, (list, tuple)): 
+1976                  items = [TR(TD(BEAUTIFY(item, **attributes))) 
+1977                           for item in c] 
+1978                  components.append(TABLE(*items, **attributes)) 
+1979              elif isinstance(c, cgi.FieldStorage): 
+1980                  components.append('FieldStorage object') 
+1981              else: 
+1982                  components.append(repr(c)) 
+1983          self.components = components 
+
    1984   
+1985   
+2043   
+2044   
+
    2045 -def embed64( 
+2046      filename = None, 
+2047      file = None, 
+2048      data = None, 
+2049      extension = 'image/gif', 
+2050      ): 
+
    2051      """ 
+2052      helper to encode the provided (binary) data into base64. 
+2053   
+2054      :param filename: if provided, opens and reads this file in 'rb' mode 
+2055      :param file: if provided, reads this file 
+2056      :param data: if provided, uses the provided data 
+2057      """ 
+2058   
+2059      if filename and os.path.exists(file): 
+2060          fp = open(filename, 'rb') 
+2061          data = fp.read() 
+2062          fp.close() 
+2063      data = base64.b64encode(data) 
+2064      return 'data:%s;base64,%s' % (extension, data) 
+
    2065   
+2066   
+
    2067 -def test(): 
+
    2068      """ 
+2069      Example: 
+2070   
+2071      >>> from validators import * 
+2072      >>> print DIV(A('click me', _href=URL(a='a', c='b', f='c')), BR(), HR(), DIV(SPAN(\"World\"), _class='unknown')).xml() 
+2073      <div><a href=\"/a/b/c\">click me</a><br /><hr /><div class=\"unknown\"><span>World</span></div></div> 
+2074      >>> print DIV(UL(\"doc\",\"cat\",\"mouse\")).xml() 
+2075      <div><ul><li>doc</li><li>cat</li><li>mouse</li></ul></div> 
+2076      >>> print DIV(UL(\"doc\", LI(\"cat\", _class='feline'), 18)).xml() 
+2077      <div><ul><li>doc</li><li class=\"feline\">cat</li><li>18</li></ul></div> 
+2078      >>> print TABLE(['a', 'b', 'c'], TR('d', 'e', 'f'), TR(TD(1), TD(2), TD(3))).xml() 
+2079      <table><tr><td>a</td><td>b</td><td>c</td></tr><tr><td>d</td><td>e</td><td>f</td></tr><tr><td>1</td><td>2</td><td>3</td></tr></table> 
+2080      >>> form=FORM(INPUT(_type='text', _name='myvar', requires=IS_EXPR('int(value)<10'))) 
+2081      >>> print form.xml() 
+2082      <form action=\"\" enctype=\"multipart/form-data\" method=\"post\"><input name=\"myvar\" type=\"text\" /></form> 
+2083      >>> print form.accepts({'myvar':'34'}, formname=None) 
+2084      False 
+2085      >>> print form.xml() 
+2086      <form action="" enctype="multipart/form-data" method="post"><input name="myvar" type="text" value="34" /><div class="error" id="myvar__error">invalid expression</div></form> 
+2087      >>> print form.accepts({'myvar':'4'}, formname=None, keepvalues=True) 
+2088      True 
+2089      >>> print form.xml() 
+2090      <form action=\"\" enctype=\"multipart/form-data\" method=\"post\"><input name=\"myvar\" type=\"text\" value=\"4\" /></form> 
+2091      >>> form=FORM(SELECT('cat', 'dog', _name='myvar')) 
+2092      >>> print form.accepts({'myvar':'dog'}, formname=None, keepvalues=True) 
+2093      True 
+2094      >>> print form.xml() 
+2095      <form action=\"\" enctype=\"multipart/form-data\" method=\"post\"><select name=\"myvar\"><option value=\"cat\">cat</option><option selected=\"selected\" value=\"dog\">dog</option></select></form> 
+2096      >>> form=FORM(INPUT(_type='text', _name='myvar', requires=IS_MATCH('^\w+$', 'only alphanumeric!'))) 
+2097      >>> print form.accepts({'myvar':'as df'}, formname=None) 
+2098      False 
+2099      >>> print form.xml() 
+2100      <form action=\"\" enctype=\"multipart/form-data\" method=\"post\"><input name=\"myvar\" type=\"text\" value=\"as df\" /><div class=\"error\" id=\"myvar__error\">only alphanumeric!</div></form> 
+2101      >>> session={} 
+2102      >>> form=FORM(INPUT(value=\"Hello World\", _name=\"var\", requires=IS_MATCH('^\w+$'))) 
+2103      >>> if form.accepts({}, session,formname=None): print 'passed' 
+2104      >>> if form.accepts({'var':'test ', '_formkey': session['_formkey[None]']}, session, formname=None): print 'passed' 
+2105      """ 
+2106      pass 
+
    2107   
+2108   
+
    2109 -class web2pyHTMLParser(HTMLParser): 
+
    2110      """ 
+2111      obj = web2pyHTMLParser(text) parses and html/xml text into web2py helpers. 
+2112      obj.tree contains the root of the tree, and tree can be manipulated 
+2113   
+2114      >>> str(web2pyHTMLParser('hello<div a="b" c=3>wor&lt;ld<span>xxx</span>y<script/>yy</div>zzz').tree) 
+2115      'hello<div a="b" c="3">wor&lt;ld<span>xxx</span>y<script></script>yy</div>zzz' 
+2116      >>> str(web2pyHTMLParser('<div>a<span>b</div>c').tree) 
+2117      '<div>a<span>b</span></div>c' 
+2118      >>> tree = web2pyHTMLParser('hello<div a="b">world</div>').tree 
+2119      >>> tree.element(_a='b')['_c']=5 
+2120      >>> str(tree) 
+2121      'hello<div a="b" c="5">world</div>' 
+2122      """ 
+
    2123 -    def __init__(self,text,closed=('input','link')): 
+
    2124          HTMLParser.__init__(self) 
+2125          self.tree = self.parent = TAG['']() 
+2126          self.closed = closed 
+2127          self.tags = [x for x in __all__ if isinstance(eval(x),DIV)] 
+2128          self.last = None 
+2129          self.feed(text) 
+
    2130 -    def handle_starttag(self, tagname, attrs): 
+
    2131          if tagname.upper() in self.tags: 
+2132              tag=eval(tagname.upper()) 
+2133          else: 
+2134              if tagname in self.closed: tagname+='/' 
+2135              tag = TAG[tagname]() 
+2136          for key,value in attrs: tag['_'+key]=value 
+2137          tag.parent = self.parent 
+2138          self.parent.append(tag) 
+2139          if not tag.tag.endswith('/'): 
+2140              self.parent=tag 
+2141          else: 
+2142              self.last = tag.tag[:-1] 
+
    2143 -    def handle_data(self,data): 
+
    2144          try: 
+2145              self.parent.append(data.encode('utf8','xmlcharref')) 
+2146          except: 
+2147              self.parent.append(data.decode('latin1').encode('utf8','xmlcharref')) 
+
    2148 -    def handle_charref(self,name): 
+
    2149          if name[1].lower()=='x': 
+2150              self.parent.append(unichr(int(name[2:], 16)).encode('utf8')) 
+2151          else: 
+2152              self.parent.append(unichr(int(name[1:], 10)).encode('utf8')) 
+
    2153 -    def handle_entityref(self,name): 
+
    2154          self.parent.append(unichr(name2codepoint[name]).encode('utf8')) 
+
    2155 -    def handle_endtag(self, tagname): 
+
    2156          # this deals with unbalanced tags 
+2157          if tagname==self.last: 
+2158              return 
+2159          while True: 
+2160              try: 
+2161                  parent_tagname=self.parent.tag 
+2162                  self.parent = self.parent.parent 
+2163              except: 
+2164                  raise RuntimeError, "unable to balance tag %s" % tagname 
+2165              if parent_tagname[:len(tagname)]==tagname: break 
+
    2166   
+
    2167 -def markdown_serializer(text,tag=None,attr={}): 
+
    2168      if tag is None: return re.sub('\s+',' ',text) 
+2169      if tag=='br': return '\n\n' 
+2170      if tag=='h1': return '#'+text+'\n\n' 
+2171      if tag=='h2': return '#'*2+text+'\n\n' 
+2172      if tag=='h3': return '#'*3+text+'\n\n' 
+2173      if tag=='h4': return '#'*4+text+'\n\n' 
+2174      if tag=='p': return text+'\n\n' 
+2175      if tag=='b' or tag=='strong': return '**%s**' % text 
+2176      if tag=='em' or tag=='i': return '*%s*' % text 
+2177      if tag=='tt' or tag=='code': return '`%s`' % text 
+2178      if tag=='a': return '[%s](%s)' % (text,attr.get('_href','')) 
+2179      if tag=='img': return '![%s](%s)' % (attr.get('_alt',''),attr.get('_src','')) 
+2180      return text 
+
    2181   
+
    2182 -def markmin_serializer(text,tag=None,attr={}): 
+
    2183      # if tag is None: return re.sub('\s+',' ',text) 
+2184      if tag=='br': return '\n\n' 
+2185      if tag=='h1': return '# '+text+'\n\n' 
+2186      if tag=='h2': return '#'*2+' '+text+'\n\n' 
+2187      if tag=='h3': return '#'*3+' '+text+'\n\n' 
+2188      if tag=='h4': return '#'*4+' '+text+'\n\n' 
+2189      if tag=='p': return text+'\n\n' 
+2190      if tag=='li': return '\n- '+text.replace('\n',' ') 
+2191      if tag=='tr': return text[3:].replace('\n',' ')+'\n' 
+2192      if tag in ['table','blockquote']: return '\n-----\n'+text+'\n------\n' 
+2193      if tag in ['td','th']: return ' | '+text 
+2194      if tag in ['b','strong','label']: return '**%s**' % text 
+2195      if tag in ['em','i']: return "''%s''" % text 
+2196      if tag in ['tt']: return '``%s``' % text.strip() 
+2197      if tag in ['code']: return '``\n%s``' % text 
+2198      if tag=='a': return '[[%s %s]]' % (text,attr.get('_href','')) 
+2199      if tag=='img': return '[[%s %s left]]' % (attr.get('_alt','no title'),attr.get('_src','')) 
+2200      return text 
+
    2201   
+2202   
+
    2203 -class MARKMIN(XmlComponent): 
+
    2204      """ 
+2205      For documentation: http://web2py.com/examples/static/markmin.html 
+2206      """ 
+
    2207 -    def __init__(self, text, extra={}, allowed={}, sep='p'): 
+
    2208          self.text = text 
+2209          self.extra = extra 
+2210          self.allowed = allowed 
+2211          self.sep = sep 
+
    2212   
+
    2213 -    def xml(self): 
+
    2214          """ 
+2215          calls the gluon.contrib.markmin render function to convert the wiki syntax 
+2216          """ 
+2217          return render(self.text,extra=self.extra,allowed=self.allowed,sep=self.sep) 
+
    2218   
+
    2219 -    def __str__(self): 
+
    2220          return self.xml() 
+
    2221   
+
    2222 -    def flatten(self,render=None): 
+
    2223          """ 
+2224          return the text stored by the MARKMIN object rendered by the render function 
+2225          """ 
+2226          return self.text 
+
    2227   
+
    2228 -    def elements(self, *args, **kargs): 
+
    2229          """ 
+2230          to be considered experimental since the behavior of this method is questionable 
+2231          another options could be TAG(self.text).elements(*args,**kargs) 
+2232          """ 
+2233          return [self.text] 
+
    2234   
+2235   
+2236  if __name__ == '__main__': 
+2237      import doctest 
+2238      doctest.testmod() 
+2239   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:09 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.A-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.A-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.A-class.html
@@ -0,0 +1,304 @@
+
+
+
+
+  web2py.gluon.html.A
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class A
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class A
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  A
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    xml(self)
    
+      generates the xml for this component.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'a'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    xml(self)
+  
    
+      		source code 
+    
    
+  
+  generates the xml for this component.
+  
    
+    
    Overrides:
+      DIV.xml
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.B-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.B-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.B-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.B
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class B
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class B
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  B
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'b'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.BEAUTIFY-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.BEAUTIFY-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.BEAUTIFY-class.html
@@ -0,0 +1,363 @@
+
+
+
+
+  web2py.gluon.html.BEAUTIFY
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class BEAUTIFY
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class BEAUTIFY
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  BEAUTIFY
+
    
+
+
    
+
    +
+example::
+
+    >>> BEAUTIFY(['a', 'b', {'hello': 'world'}]).xml()
+    '<div><table><tr><td><div>a</div></td></tr><tr><td><div>b</div></td></tr><tr><td><div><table><tr><td style="font-weight:bold;">hello</td><td valign="top">:</td><td><div>world</div></td></tr></table></div></td></tr></table></div>'
+
+turns any list, dictionary, etc into decent looking html.
+Two special attributes are
+:sorted: a function that takes the dict and returned sorted keys
+:keyfilter: a funciton that takes a key and returns its representation
+            or None if the key is to be skipped. By default key[:1]=='_' is skipped.
+
+


    
+
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        component,
+        **attributes)
    
+      :param *components: any components that should be nested in this 
+      element :param **attributes: any attributes you want to give to this 
+      element    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    no_underscore(key)
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'div'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        component,
+        **attributes)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
    :param *components: any components that should be nested in this 
+  element :param **attributes: any attributes you want to give to this 
+  element
    
+  :raises SyntaxError: when a stand alone tag receives components
+  
    
+    
    Overrides:
+      DIV.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.BODY-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.BODY-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.BODY-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.BODY
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class BODY
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class BODY
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  BODY
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'body'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.BR-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.BR-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.BR-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.BR
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class BR
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class BR
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  BR
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'br/'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.BUTTON-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.BUTTON-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.BUTTON-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.BUTTON
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class BUTTON
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class BUTTON
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  BUTTON
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'button'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.CAT-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.CAT-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.CAT-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.CAT
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class CAT
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class CAT
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  CAT
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = ''
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:00 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.CENTER-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.CENTER-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.CENTER-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.CENTER
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class CENTER
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class CENTER
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  CENTER
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'center'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.CODE-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.CODE-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.CODE-class.html
@@ -0,0 +1,325 @@
+
+
+
+
+  web2py.gluon.html.CODE
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class CODE
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class CODE
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  CODE
+
    
+
+
    
+
    displays code in HTML with syntax highlighting.
    
+  :param attributes: optional attributes:
+  
      
+    
    • 
+      language: indicates the language, otherwise PYTHON is assumed
+    
      • 
+    
    • 
+      link: can provide a link
+    
      • 
+    
    • 
+      styles: for styles
+    
      • 
+  
    
+  Example:
+
    +   {{=CODE("print 'hello world'", language='python', link=None,
+       counter=1, styles={}, highlight_line=None)}}
+
    
+  
    supported languages are "python", "html_plain", 
+  "c", "cpp", "web2py", "html". The
+  "html" language interprets {{ and }} tags as "web2py"
+  code, "html_plain" doesn't.
    
+  
    if a link='/examples/global/vars/' is provided web2py keywords are 
+  linked to the online docs.
    
+  the counter is used for line numbering, counter can be None or a 
+  prompt string.

    
+
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    xml(self)
    
+      generates the xml for this component.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag,
+      tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    xml(self)
+  
    
+      		source code 
+    
    
+  
+  generates the xml for this component.
+  
    
+    
    Overrides:
+      DIV.xml
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.COL-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.COL-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.COL-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.COL
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class COL
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class COL
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  COL
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'col'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.COLGROUP-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.COLGROUP-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.COLGROUP-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.COLGROUP
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class COLGROUP
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class COLGROUP
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  COLGROUP
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'colgroup'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.DIV-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.DIV-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.DIV-class.html
@@ -0,0 +1,1180 @@
+
+
+
+
+  web2py.gluon.html.DIV
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class DIV
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class DIV
    source code

    
+
    +  object --+    
+           |    
+XmlComponent --+
+               |
+              DIV
+
    
+
+
    Known Subclasses:
    
+
    
+    A,
+    B,
+    BEAUTIFY,
+    BODY,
+    BR,
+    CAT,
+    CENTER,
+    CODE,
+    EM,
+    EMBED,
+    FIELDSET,
+    FORM,
+    H1,
+    H2,
+    H3,
+    H4,
+    H5,
+    H6,
+    HEAD,
+    HR,
+    HTML,
+    I,
+    IFRAME,
+    IMG,
+    INPUT,
+    LABEL,
+    LEGEND,
+    LI,
+    LINK,
+    MENU,
+    META,
+    OBJECT,
+    UL,
+    OPTGROUP,
+    OPTION,
+    P,
+    PRE,
+    SCRIPT,
+    SPAN,
+    TABLE,
+    STYLE,
+    TBODY,
+    TD,
+    TFOOT,
+    TH,
+    THEAD,
+    TITLE,
+    TR,
+    TT,
+    XHTML,
+    BUTTON,
+    COL,
+    COLGROUP
+
    
+
+
    
+
    HTML helper, for easy generating and manipulating a DOM structure. 
+  Little or no validation is done.
    
+  
    Behaves like a dictionary regarding updating of attributes. Behaves 
+  like a list regarding inserting/appending components.
    
+  example:
+
    +   >>> DIV('hello', 'world', _style='color:red;').xml()
+   '<div style="color:red;">helloworld</div>'
+
    
+  
    all other HTML helpers are derived from DIV.
    
+  _something="value" attributes are transparently translated 
+  into something="value" HTML attributes

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        *components,
+        **attributes)
    
+      :param *components: any components that should be nested in this 
+      element :param **attributes: any attributes you want to give to this 
+      element    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    update(self,
+        **kargs)
    
+      dictionary like updating of the tag attributes    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    append(self,
+        value)
    
+      list style appending of components    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    insert(self,
+        i,
+        value)
    
+      list style inserting of components    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getitem__(self,
+        i)
    
+      gets attribute with name 'i' or component #i.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __setitem__(self,
+        i,
+        value)
    
+      sets attribute with name 'i' or component #i.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __delitem__(self,
+        i)
    
+      deletes attribute with name 'i' or component #i.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __len__(self)
    
+      returns the number of included components    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __nonzero__(self)
    
+      always return True    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _fixup(self)
    
+      Handling of provided components.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _wrap_components(self,
+        allowed_parents,
+        wrap_parent=1,
+        wrap_lambda=1)
    
+      helper for _fixup.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _postprocessing(self)
    
+      Handling of attributes (normally the ones not prefixed with 
+      '_').    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _traverse(self,
+        status,
+        hideerror=True)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _validate(self)
    
+      nothing to validate yet.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _setnode(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _xml(self)
    
+      helper for xml generation.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    xml(self)
    
+      generates the xml for this component.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __str__(self)
    
+      str(COMPONENT) returns equals COMPONENT.xml()    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    flatten(self,
+        render=1)
    
+      return the text stored by the DIV object rendered by the render 
+      function the render function must take text, tagname, and attributes 
+      render=None is equivalent to render=lambda text, tag, attr: text    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    elements(self,
+        *args,
+        **kargs)
    
+      find all component that match the supplied attribute dictionary, 
+      or None if nothing could be found    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    element(self,
+        *args,
+        **kargs)
    
+      find the first component that matches the supplied attribute 
+      dictionary, or None if nothing could be found    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    siblings(self,
+        *args,
+        **kargs)
    
+      find all sibling components that match the supplied argument list 
+      and attribute dictionary, or None if nothing could be found    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    sibling(self,
+        *args,
+        **kargs)
    
+      find the first sibling component that match the supplied argument 
+      list and attribute dictionary, or None if nothing could be found    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'div'
+    
    
+       
+    
+        regex_tag = re.compile(r'^[\w-:]+')
+    
    
+       
+    
+        regex_id = re.compile(r'#([\w-]+)')
+    
    
+       
+    
+        regex_class = re.compile(r'\.([\w-]+)')
+    
    
+       
+    
+        regex_attr = re.compile(r'\[([\w-:]+)=(.*?)\]')
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        *components,
+        **attributes)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
    :param *components: any components that should be nested in this 
+  element :param **attributes: any attributes you want to give to this 
+  element
    
+  :raises SyntaxError: when a stand alone tag receives components
+  
    
+    
    Overrides:
+      object.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    append(self,
+        value)
+  
    
+      		source code 
+    
    
+  
+  list style appending of components
+
    +>>> a=DIV()
+>>> a.append(SPAN('x'))
+>>> print a
+<div><span>x</span></div>
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    insert(self,
+        i,
+        value)
+  
    
+      		source code 
+    
    
+  
+  list style inserting of components
+
    +>>> a=DIV()
+>>> a.insert(0,SPAN('x'))
+>>> print a
+<div><span>x</span></div>
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __getitem__(self,
+        i)
+    
    (Indexing operator)
+  
    
+      		source code 
+    
    
+  
+  
    +
+gets attribute with name 'i' or component #i.
+If attribute 'i' is not found returns None
+
+:param i: index
+   if i is a string: the name of the attribute
+   otherwise references to number of the component
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __setitem__(self,
+        i,
+        value)
+    
    (Index assignment operator)
+  
    
+      		source code 
+    
    
+  
+  
    +
+sets attribute with name 'i' or component #i.
+
+:param i: index
+   if i is a string: the name of the attribute
+   otherwise references to number of the component
+:param value: the new value
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __delitem__(self,
+        i)
+    
    (Index deletion operator)
+  
    
+      		source code 
+    
    
+  
+  
    +
+deletes attribute with name 'i' or component #i.
+
+:param i: index
+   if i is a string: the name of the attribute
+   otherwise references to number of the component
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _fixup(self)
+  
    
+      		source code 
+    
    
+  
+  
    Handling of provided components.
    
+  Nothing to fixup yet. May be overridden by subclasses, eg for wrapping
+  some components in another component or blocking them.
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _wrap_components(self,
+        allowed_parents,
+        wrap_parent=1,
+        wrap_lambda=1)
+  
    
+      		source code 
+    
    
+  
+  
    +
+helper for _fixup. Checks if a component is in allowed_parents,
+otherwise wraps it in wrap_parent
+
+:param allowed_parents: (tuple) classes that the component should be an
+    instance of
+:param wrap_parent: the class to wrap the component in, if needed
+:param wrap_lambda: lambda to use for wrapping, if needed
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _postprocessing(self)
+  
    
+      		source code 
+    
    
+  
+  
    Handling of attributes (normally the ones not prefixed with '_').
    
+  Nothing to postprocess yet. May be overridden by subclasses
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _validate(self)
+  
    
+      		source code 
+    
    
+  
+  nothing to validate yet. May be overridden by subclasses
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _xml(self)
+  
    
+      		source code 
+    
    
+  
+  
    +
+helper for xml generation. Returns separately:
+- the component attributes
+- the generated xml of the inner components
+
+Component attributes start with an underscore ('_') and
+do not have a False or None value. The underscore is removed.
+A value of True is replaced with the attribute name.
+
+:returns: tuple: (attributes, components)
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    xml(self)
+  
    
+      		source code 
+    
    
+  
+  generates the xml for this component.
+  
    
+    
    Overrides:
+      XmlComponent.xml
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __str__(self)
+    
    (Informal representation operator)
+  
    
+      		source code 
+    
    
+  
+  str(COMPONENT) returns equals COMPONENT.xml()
+  
    
+    
    Overrides:
+      object.__str__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    flatten(self,
+        render=1)
+  
    
+      		source code 
+    
    
+  
+  return the text stored by the DIV object rendered by the render 
+  function the render function must take text, tagname, and attributes 
+  render=None is equivalent to render=lambda text, tag, attr: text
+
    +>>> markdown = lambda text,tag=None,attributes={}:                         {None: re.sub('\s+',' ',text),                          'h1':'#'+text+'\n\n',                          'p':text+'\n'}.get(tag,text)
+>>> a=TAG('<h1>Header</h1><p>this is a     test</p>')
+>>> a.flatten(markdown)
+'#Header\n\nthis is a test\n'
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    elements(self,
+        *args,
+        **kargs)
+  
    
+      		source code 
+    
    
+  
+  
    find all component that match the supplied attribute dictionary, or 
+  None if nothing could be found
    
+  All components of the components are searched.
+
    +>>> a = DIV(DIV(SPAN('x'),3,DIV(SPAN('y'))))
+>>> for c in a.elements('span',first_only=True): c[0]='z'
+>>> print a
+<div><div><span>z</span>3<div><span>y</span></div></div></div>
+>>> for c in a.elements('span'): c[0]='z'
+>>> print a
+<div><div><span>z</span>3<div><span>z</span></div></div></div>
    
+  It also supports a syntax compatible with jQuery
+
    +>>> a=TAG('<div><span><a id="1-1" u:v=$>hello</a></span><p class="this is a test">world</p></div>')
+>>> for e in a.elements('div a#1-1, p.is'): print e.flatten()
+hello
+world
+>>> for e in a.elements('#1-1'): print e.flatten()
+hello
+>>> a.elements('a[u:v=$]')[0].xml()
+'<a id="1-1" u:v="$">hello</a>'
    
+
    +>>> a=FORM( INPUT(_type='text'), SELECT(range(1)), TEXTAREA() )
+>>> for c in a.elements('input, select, textarea'): c['_disabled'] = 'disabled'
+>>> a.xml()
+'<form action="" enctype="multipart/form-data" method="post"><input disabled="disabled" type="text" /><select disabled="disabled"><option value="0">0</option></select><textarea cols="40" disabled="disabled" rows="10"></textarea></form>'
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    element(self,
+        *args,
+        **kargs)
+  
    
+      		source code 
+    
    
+  
+  
    find the first component that matches the supplied attribute 
+  dictionary, or None if nothing could be found
    
+  Also the components of the components are searched.
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.EM-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.EM-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.EM-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.EM
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class EM
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class EM
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  EM
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'em'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.EMBED-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.EMBED-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.EMBED-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.EMBED
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class EMBED
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class EMBED
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  EMBED
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'embed/'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.FIELDSET-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.FIELDSET-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.FIELDSET-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.FIELDSET
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class FIELDSET
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class FIELDSET
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  FIELDSET
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'fieldset'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.FORM-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.FORM-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.FORM-class.html
@@ -0,0 +1,623 @@
+
+
+
+
+  web2py.gluon.html.FORM
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class FORM
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class FORM
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  FORM
+
    
+
+
    Known Subclasses:
    
+
    
+    sqlhtml.SQLFORM
+
    
+
+
    
+example:
+
    +   >>> from validators import IS_NOT_EMPTY
+   >>> form=FORM(INPUT(_name="test", requires=IS_NOT_EMPTY()))
+   >>> form.xml()
+   '<form action="" enctype="multipart/form-data" method="post"><input name="test" type="text" /></form>'
+
    
+  
    a FORM is container for INPUT, TEXTAREA, SELECT and other helpers
    
+  form has one important method:
+
    +   form.accepts(request.vars, session)
+
    
+  if form is accepted (and all validators pass) form.vars contains the 
+  accepted vars, otherwise form.errors contains the errors. in case of 
+  errors the form is modified to present the errors to the user.

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        *components,
+        **attributes)
    
+      :param *components: any components that should be nested in this 
+      element :param **attributes: any attributes you want to give to this 
+      element    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _postprocessing(self)
    
+      Handling of attributes (normally the ones not prefixed with 
+      '_').    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    accepts(self,
+        vars,
+        session=1,
+        formname='default',
+        keepvalues=True,
+        onvalidation=1,
+        hideerror=True)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    hidden_fields(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    process(self,
+        values=1,
+        session=1,
+        **args)
    
+      Perform the .validate() method but returns the form
+
+Usage in controllers:
+# directly on return
+def action():
+    #some code here
+    return dict(form=FORM(...).process(...))
+
+You can use it with FORM, SQLFORM or FORM based plugins
+
+Examples:
+#response.flash messages
+def action():
+    form = SQLFORM(db.table).process(message_onsuccess='Sucess!')
+    retutn dict(form=form)
+
+# callback function
+# callback receives True or False as first arg, and a list of args.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    validate(self,
+        values=1,
+        session=1,
+        formname='default',
+        keepvalues=True,
+        onvalidation=1,
+        hideerror=True,
+        onsuccess='flash',
+        onfailure='flash',
+        message_onsuccess=1,
+        message_onfailure=1)
    
+      This function validates the form, 
+you can use it instead of directly form.accepts.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    xml(self)
    
+      generates the xml for this component.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'form'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        *components,
+        **attributes)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
    :param *components: any components that should be nested in this 
+  element :param **attributes: any attributes you want to give to this 
+  element
    
+  :raises SyntaxError: when a stand alone tag receives components
+  
    
+    
    Overrides:
+      DIV.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _postprocessing(self)
+  
    
+      		source code 
+    
    
+  
+  
    Handling of attributes (normally the ones not prefixed with '_').
    
+  Nothing to postprocess yet. May be overridden by subclasses
+  
    
+    
    Overrides:
+      DIV._postprocessing
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    process(self,
+        values=1,
+        session=1,
+        **args)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Perform the .validate() method but returns the form
+
+Usage in controllers:
+# directly on return
+def action():
+    #some code here
+    return dict(form=FORM(...).process(...))
+
+You can use it with FORM, SQLFORM or FORM based plugins
+
+Examples:
+#response.flash messages
+def action():
+    form = SQLFORM(db.table).process(message_onsuccess='Sucess!')
+    retutn dict(form=form)
+
+# callback function
+# callback receives True or False as first arg, and a list of args.
+def my_callback(status, msg):
+   response.flash = "Success! "+msg if status else "Errors occured"
+
+# after argument can be 'flash' to response.flash messages
+# or a function name to use as callback or None to do nothing.
+def action():
+    return dict(form=SQLFORM(db.table).process(onsuccess=my_callback)
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    validate(self,
+        values=1,
+        session=1,
+        formname='default',
+        keepvalues=True,
+        onvalidation=1,
+        hideerror=True,
+        onsuccess='flash',
+        onfailure='flash',
+        message_onsuccess=1,
+        message_onfailure=1)
+  
    
+      		source code 
+    
    
+  
+  
    +
+This function validates the form, 
+you can use it instead of directly form.accepts.
+
+Usage:
+In controller
+
+def action():
+    form=FORM(INPUT(_name="test", requires=IS_NOT_EMPTY()))
+    form.validate() #you can pass some args here - see below
+    return dict(form=form)
+
+This can receive a bunch of arguments        
+
+onsuccess = 'flash' - will show message_onsuccess in response.flash
+            None - will do nothing
+            can be a function (lambda form: pass)
+onfailure = 'flash' - will show message_onfailure in response.flash
+            None - will do nothing
+            can be a function (lambda form: pass)
+
+values = values to test the validation - dictionary, response.vars, session or other - Default to (request.vars, session)
+message_onsuccess
+message_onfailure
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    xml(self)
+  
    
+      		source code 
+    
    
+  
+  generates the xml for this component.
+  
    
+    
    Overrides:
+      DIV.xml
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.H1-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.H1-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.H1-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.H1
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class H1
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class H1
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  H1
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'h1'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.H2-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.H2-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.H2-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.H2
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class H2
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class H2
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  H2
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'h2'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.H3-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.H3-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.H3-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.H3
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class H3
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class H3
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  H3
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'h3'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.H4-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.H4-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.H4-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.H4
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class H4
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class H4
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  H4
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'h4'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.H5-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.H5-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.H5-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.H5
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class H5
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class H5
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  H5
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'h5'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.H6-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.H6-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.H6-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.H6
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class H6
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class H6
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  H6
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'h6'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.HEAD-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.HEAD-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.HEAD-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.HEAD
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class HEAD
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class HEAD
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  HEAD
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'head'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.HR-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.HR-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.HR-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.HR
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class HR
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class HR
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  HR
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'hr/'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.HTML-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.HTML-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.HTML-class.html
@@ -0,0 +1,428 @@
+
+
+
+
+  web2py.gluon.html.HTML
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class HTML
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class HTML
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  HTML
+
    
+
+
    
+
    There are four predefined document type definitions. They can be 
+  specified in the 'doctype' parameter:
    
+  
    -'strict' enables strict doctype -'transitional' enables transitional 
+  doctype (default) -'frameset' enables frameset doctype -'html5' enables 
+  HTML 5 doctype -any other string will be treated as user's own 
+  doctype
    
+  
    'lang' parameter specifies the language of the document. Defaults to 
+  'en'.
    
+  See also :class:`DIV`

    
+
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    xml(self)
    
+      generates the xml for this component.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'html'
+    
    
+       
+    
+        strict = '<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "h...
+    
    
+       
+    
+        transitional = '<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 T...
+    
    
+       
+    
+        frameset = '<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Frame...
+    
    
+       
+    
+        html5 = '<!DOCTYPE HTML>\n'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    xml(self)
+  
    
+      		source code 
+    
    
+  
+  generates the xml for this component.
+  
    
+    
    Overrides:
+      DIV.xml
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    strict
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +'''<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.or\
+g/TR/html4/strict.dtd">
+'''
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    transitional
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +'''<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "htt\
+p://www.w3.org/TR/html4/loose.dtd">
+'''
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    frameset
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +'''<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Frameset//EN" "http://\
+www.w3.org/TR/html4/frameset.dtd">
+'''
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.I-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.I-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.I-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.I
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class I
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class I
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  I
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'i'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.IFRAME-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.IFRAME-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.IFRAME-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.IFRAME
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class IFRAME
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IFRAME
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  IFRAME
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'iframe'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.IMG-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.IMG-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.IMG-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.IMG
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class IMG
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IMG
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  IMG
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'img/'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.INPUT-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.INPUT-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.INPUT-class.html
@@ -0,0 +1,423 @@
+
+
+
+
+  web2py.gluon.html.INPUT
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class INPUT
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class INPUT
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  INPUT
+
    
+
+
    Known Subclasses:
    
+
    
+    SELECT,
+    TEXTAREA
+
    
+
+
    
+
    +
+INPUT Component
+
+examples::
+
+    >>> INPUT(_type='text', _name='name', value='Max').xml()
+    '<input name="name" type="text" value="Max" />'
+
+    >>> INPUT(_type='checkbox', _name='checkbox', value='on').xml()
+    '<input checked="checked" name="checkbox" type="checkbox" value="on" />'
+
+    >>> INPUT(_type='radio', _name='radio', _value='yes', value='yes').xml()
+    '<input checked="checked" name="radio" type="radio" value="yes" />'
+
+    >>> INPUT(_type='radio', _name='radio', _value='no', value='yes').xml()
+    '<input name="radio" type="radio" value="no" />'
+
+the input helper takes two special attributes value= and requires=.
+
+:param value: used to pass the initial value for the input field.
+    value differs from _value because it works for checkboxes, radio,
+    textarea and select/option too.
+
+    - for a checkbox value should be '' or 'on'.
+    - for a radio or select/option value should be the _value
+        of the checked/selected item.
+
+:param requires: should be None, or a validator or a list of validators
+    for the value of the field.
+
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    _validate(self)
    
+      nothing to validate yet.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _postprocessing(self)
    
+      Handling of attributes (normally the ones not prefixed with 
+      '_').    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    xml(self)
    
+      generates the xml for this component.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _setnode,
+      _traverse,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'input/'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _validate(self)
+  
    
+      		source code 
+    
    
+  
+  nothing to validate yet. May be overridden by subclasses
+  
    
+    
    Overrides:
+      DIV._validate
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _postprocessing(self)
+  
    
+      		source code 
+    
    
+  
+  
    Handling of attributes (normally the ones not prefixed with '_').
    
+  Nothing to postprocess yet. May be overridden by subclasses
+  
    
+    
    Overrides:
+      DIV._postprocessing
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    xml(self)
+  
    
+      		source code 
+    
    
+  
+  generates the xml for this component.
+  
    
+    
    Overrides:
+      DIV.xml
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.LABEL-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.LABEL-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.LABEL-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.LABEL
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class LABEL
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class LABEL
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  LABEL
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'label'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.LEGEND-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.LEGEND-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.LEGEND-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.LEGEND
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class LEGEND
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class LEGEND
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  LEGEND
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'legend'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.LI-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.LI-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.LI-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.LI
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class LI
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class LI
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  LI
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'li'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.LINK-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.LINK-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.LINK-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.LINK
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class LINK
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class LINK
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  LINK
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'link/'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.MARKMIN-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.MARKMIN-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.MARKMIN-class.html
@@ -0,0 +1,376 @@
+
+
+
+
+  web2py.gluon.html.MARKMIN
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class MARKMIN
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class MARKMIN
    source code

    
+
    +  object --+    
+           |    
+XmlComponent --+
+               |
+              MARKMIN
+
    
+
+
    
+For documentation: http://web2py.com/examples/static/markmin.html

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        text,
+        extra={},
+        allowed={},
+        sep='p')
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    xml(self)
    
+      calls the gluon.contrib.markmin render function to convert the 
+      wiki syntax    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __str__(self)
    
+      str(x)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    flatten(self,
+        render=1)
    
+      return the text stored by the MARKMIN object rendered by the 
+      render function    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    elements(self,
+        *args,
+        **kargs)
    
+      to be considered experimental since the behavior of this method is
+      questionable another options could be 
+      TAG(self.text).elements(*args,**kargs)    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        text,
+        extra={},
+        allowed={},
+        sep='p')
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    xml(self)
+  
    
+      		source code 
+    
    
+  
+  calls the gluon.contrib.markmin render function to convert the wiki 
+  syntax
+  
    
+    
    Overrides:
+      XmlComponent.xml
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __str__(self)
+    
    (Informal representation operator)
+  
    
+      		source code 
+    
    
+  
+  str(x)
+  
    
+    
    Overrides:
+      object.__str__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.MENU-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.MENU-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.MENU-class.html
@@ -0,0 +1,386 @@
+
+
+
+
+  web2py.gluon.html.MENU
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class MENU
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class MENU
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  MENU
+
    
+
+
    
+
    +
+Used to build menus
+
+Optional arguments
+  _class: defaults to 'web2py-menu web2py-menu-vertical'
+  ul_class: defaults to 'web2py-menu-vertical'
+  li_class: defaults to 'web2py-menu-expand'
+
+Example:
+    menu = MENU([['name', False, URL(...), [submenu]], ...])
+    {{=menu}}
+
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        data,
+        **args)
    
+      :param *components: any components that should be nested in this 
+      element :param **attributes: any attributes you want to give to this 
+      element    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    serialize(self,
+        data,
+        level=0)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    xml(self)
    
+      generates the xml for this component.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'ul'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        data,
+        **args)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
    :param *components: any components that should be nested in this 
+  element :param **attributes: any attributes you want to give to this 
+  element
    
+  :raises SyntaxError: when a stand alone tag receives components
+  
    
+    
    Overrides:
+      DIV.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    xml(self)
+  
    
+      		source code 
+    
    
+  
+  generates the xml for this component.
+  
    
+    
    Overrides:
+      DIV.xml
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.META-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.META-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.META-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.META
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class META
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class META
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  META
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'meta/'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.OBJECT-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.OBJECT-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.OBJECT-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.OBJECT
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class OBJECT
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class OBJECT
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  OBJECT
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'object'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.OL-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.OL-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.OL-class.html
@@ -0,0 +1,250 @@
+
+
+
+
+  web2py.gluon.html.OL
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class OL
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class OL
    source code

    
+
    +  object --+            
+           |            
+XmlComponent --+        
+               |        
+             DIV --+    
+                   |    
+                  UL --+
+                       |
+                      OL
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
        
    Inherited from UL (private):
+      _fixup
+      
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'ol'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.OPTGROUP-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.OPTGROUP-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.OPTGROUP-class.html
@@ -0,0 +1,306 @@
+
+
+
+
+  web2py.gluon.html.OPTGROUP
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class OPTGROUP
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class OPTGROUP
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  OPTGROUP
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    _fixup(self)
    
+      Handling of provided components.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'optgroup'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _fixup(self)
+  
    
+      		source code 
+    
    
+  
+  
    Handling of provided components.
    
+  Nothing to fixup yet. May be overridden by subclasses, eg for wrapping
+  some components in another component or blocking them.
+  
    
+    
    Overrides:
+      DIV._fixup
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.OPTION-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.OPTION-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.OPTION-class.html
@@ -0,0 +1,306 @@
+
+
+
+
+  web2py.gluon.html.OPTION
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class OPTION
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class OPTION
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  OPTION
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    _fixup(self)
    
+      Handling of provided components.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'option'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _fixup(self)
+  
    
+      		source code 
+    
    
+  
+  
    Handling of provided components.
    
+  Nothing to fixup yet. May be overridden by subclasses, eg for wrapping
+  some components in another component or blocking them.
+  
    
+    
    Overrides:
+      DIV._fixup
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.P-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.P-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.P-class.html
@@ -0,0 +1,308 @@
+
+
+
+
+  web2py.gluon.html.P
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class P
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class P
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  P
+
    
+
+
    
+
    Will replace ``\n`` by ``<br />`` if the `cr2br` attribute is 
+  provided.
    
+  see also :class:`DIV`

    
+
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    xml(self)
    
+      generates the xml for this component.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'p'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    xml(self)
+  
    
+      		source code 
+    
    
+  
+  generates the xml for this component.
+  
    
+    
    Overrides:
+      DIV.xml
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.PRE-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.PRE-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.PRE-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.PRE
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class PRE
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class PRE
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  PRE
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'pre'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.SCRIPT-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.SCRIPT-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.SCRIPT-class.html
@@ -0,0 +1,304 @@
+
+
+
+
+  web2py.gluon.html.SCRIPT
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class SCRIPT
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class SCRIPT
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  SCRIPT
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    xml(self)
    
+      generates the xml for this component.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'script'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    xml(self)
+  
    
+      		source code 
+    
    
+  
+  generates the xml for this component.
+  
    
+    
    Overrides:
+      DIV.xml
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.SELECT-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.SELECT-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.SELECT-class.html
@@ -0,0 +1,360 @@
+
+
+
+
+  web2py.gluon.html.SELECT
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class SELECT
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class SELECT
    source code

    
+
    +  object --+            
+           |            
+XmlComponent --+        
+               |        
+             DIV --+    
+                   |    
+               INPUT --+
+                       |
+                      SELECT
+
    
+
+
    
+example:
+
    +   >>> from validators import IS_IN_SET
+   >>> SELECT('yes', 'no', _name='selector', value='yes',
+   ...    requires=IS_IN_SET(['yes', 'no'])).xml()
+   '<select name="selector"><option selected="selected" value="yes">yes</option><option value="no">no</option></select>'
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    _fixup(self)
    
+      Handling of provided components.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _postprocessing(self)
    
+      Handling of attributes (normally the ones not prefixed with 
+      '_').    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from INPUT:
+      xml
+      
    
+    
        
    Inherited from INPUT (private):
+      _validate
+      
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update
+      
    
+    
        
    Inherited from DIV (private):
+      _setnode,
+      _traverse,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'select'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _fixup(self)
+  
    
+      		source code 
+    
    
+  
+  
    Handling of provided components.
    
+  Nothing to fixup yet. May be overridden by subclasses, eg for wrapping
+  some components in another component or blocking them.
+  
    
+    
    Overrides:
+      DIV._fixup
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _postprocessing(self)
+  
    
+      		source code 
+    
    
+  
+  
    Handling of attributes (normally the ones not prefixed with '_').
    
+  Nothing to postprocess yet. May be overridden by subclasses
+  
    
+    
    Overrides:
+      INPUT._postprocessing
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.SPAN-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.SPAN-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.SPAN-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.SPAN
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class SPAN
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class SPAN
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  SPAN
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'span'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.STYLE-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.STYLE-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.STYLE-class.html
@@ -0,0 +1,304 @@
+
+
+
+
+  web2py.gluon.html.STYLE
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class STYLE
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class STYLE
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  STYLE
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    xml(self)
    
+      generates the xml for this component.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'style'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    xml(self)
+  
    
+      		source code 
+    
    
+  
+  generates the xml for this component.
+  
    
+    
    Overrides:
+      DIV.xml
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.TABLE-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.TABLE-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.TABLE-class.html
@@ -0,0 +1,316 @@
+
+
+
+
+  web2py.gluon.html.TABLE
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class TABLE
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class TABLE
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  TABLE
+
    
+
+
    Known Subclasses:
    
+
    
+    sqlhtml.SQLTABLE
+
    
+
+
    
+
    TABLE Component.
    
+  
    If subcomponents are not TR/TBODY/THEAD/TFOOT-components they will be 
+  wrapped in a TR
    
+  see also :class:`DIV`

    
+
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    _fixup(self)
    
+      Handling of provided components.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'table'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _fixup(self)
+  
    
+      		source code 
+    
    
+  
+  
    Handling of provided components.
    
+  Nothing to fixup yet. May be overridden by subclasses, eg for wrapping
+  some components in another component or blocking them.
+  
    
+    
    Overrides:
+      DIV._fixup
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.TBODY-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.TBODY-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.TBODY-class.html
@@ -0,0 +1,306 @@
+
+
+
+
+  web2py.gluon.html.TBODY
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class TBODY
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class TBODY
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  TBODY
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    _fixup(self)
    
+      Handling of provided components.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'tbody'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _fixup(self)
+  
    
+      		source code 
+    
    
+  
+  
    Handling of provided components.
    
+  Nothing to fixup yet. May be overridden by subclasses, eg for wrapping
+  some components in another component or blocking them.
+  
    
+    
    Overrides:
+      DIV._fixup
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.TD-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.TD-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.TD-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.TD
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class TD
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class TD
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  TD
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'td'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.TEXTAREA-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.TEXTAREA-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.TEXTAREA-class.html
@@ -0,0 +1,317 @@
+
+
+
+
+  web2py.gluon.html.TEXTAREA
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class TEXTAREA
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class TEXTAREA
    source code

    
+
    +  object --+            
+           |            
+XmlComponent --+        
+               |        
+             DIV --+    
+                   |    
+               INPUT --+
+                       |
+                      TEXTAREA
+
    
+
+
    
+example:
+
    +   TEXTAREA(_name='sometext', value='blah '*100, requires=IS_NOT_EMPTY())
+
    
+  'blah blah blah ...' will be the content of the textarea field.

    
+
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    _postprocessing(self)
    
+      Handling of attributes (normally the ones not prefixed with 
+      '_').    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from INPUT:
+      xml
+      
    
+    
        
    Inherited from INPUT (private):
+      _validate
+      
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _setnode,
+      _traverse,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'textarea'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _postprocessing(self)
+  
    
+      		source code 
+    
    
+  
+  
    Handling of attributes (normally the ones not prefixed with '_').
    
+  Nothing to postprocess yet. May be overridden by subclasses
+  
    
+    
    Overrides:
+      INPUT._postprocessing
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.TFOOT-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.TFOOT-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.TFOOT-class.html
@@ -0,0 +1,306 @@
+
+
+
+
+  web2py.gluon.html.TFOOT
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class TFOOT
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class TFOOT
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  TFOOT
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    _fixup(self)
    
+      Handling of provided components.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'tfoot'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _fixup(self)
+  
    
+      		source code 
+    
    
+  
+  
    Handling of provided components.
    
+  Nothing to fixup yet. May be overridden by subclasses, eg for wrapping
+  some components in another component or blocking them.
+  
    
+    
    Overrides:
+      DIV._fixup
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.TH-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.TH-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.TH-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.TH
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class TH
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class TH
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  TH
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'th'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.THEAD-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.THEAD-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.THEAD-class.html
@@ -0,0 +1,306 @@
+
+
+
+
+  web2py.gluon.html.THEAD
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class THEAD
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class THEAD
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  THEAD
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    _fixup(self)
    
+      Handling of provided components.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'thead'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _fixup(self)
+  
    
+      		source code 
+    
    
+  
+  
    Handling of provided components.
    
+  Nothing to fixup yet. May be overridden by subclasses, eg for wrapping
+  some components in another component or blocking them.
+  
    
+    
    Overrides:
+      DIV._fixup
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.TITLE-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.TITLE-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.TITLE-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.TITLE
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class TITLE
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class TITLE
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  TITLE
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'title'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.TR-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.TR-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.TR-class.html
@@ -0,0 +1,311 @@
+
+
+
+
+  web2py.gluon.html.TR
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class TR
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class TR
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  TR
+
    
+
+
    
+
    TR Component.
    
+  
    If subcomponents are not TD/TH-components they will be wrapped in a 
+  TD
    
+  see also :class:`DIV`

    
+
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    _fixup(self)
    
+      Handling of provided components.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'tr'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _fixup(self)
+  
    
+      		source code 
+    
    
+  
+  
    Handling of provided components.
    
+  Nothing to fixup yet. May be overridden by subclasses, eg for wrapping
+  some components in another component or blocking them.
+  
    
+    
    Overrides:
+      DIV._fixup
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.TT-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.TT-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.TT-class.html
@@ -0,0 +1,246 @@
+
+
+
+
+  web2py.gluon.html.TT
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class TT
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class TT
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  TT
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'tt'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.UL-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.UL-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.UL-class.html
@@ -0,0 +1,316 @@
+
+
+
+
+  web2py.gluon.html.UL
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class UL
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class UL
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  UL
+
    
+
+
    Known Subclasses:
    
+
    
+    OL
+
    
+
+
    
+
    UL Component.
    
+  
    If subcomponents are not LI-components they will be wrapped in a 
+  LI
    
+  see also :class:`DIV`

    
+
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    _fixup(self)
    
+      Handling of provided components.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from DIV (private):
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'ul'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _fixup(self)
+  
    
+      		source code 
+    
    
+  
+  
    Handling of provided components.
    
+  Nothing to fixup yet. May be overridden by subclasses, eg for wrapping
+  some components in another component or blocking them.
+  
    
+    
    Overrides:
+      DIV._fixup
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.XHTML-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.XHTML-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.XHTML-class.html
@@ -0,0 +1,429 @@
+
+
+
+
+  web2py.gluon.html.XHTML
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class XHTML
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class XHTML
    source code

    
+
    +  object --+        
+           |        
+XmlComponent --+    
+               |    
+             DIV --+
+                   |
+                  XHTML
+
    
+
+
    
+
    This is XHTML version of the HTML helper.
    
+  
    There are three predefined document type definitions. They can be 
+  specified in the 'doctype' parameter:
    
+  
    -'strict' enables strict doctype -'transitional' enables transitional 
+  doctype (default) -'frameset' enables frameset doctype -any other string 
+  will be treated as user's own doctype
    
+  
    'lang' parameter specifies the language of the document and the xml 
+  document. Defaults to 'en'.
    
+  
    'xmlns' parameter specifies the xml namespace. Defaults to 
+  'http://www.w3.org/1999/xhtml'.
    
+  See also :class:`DIV`

    
+
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    xml(self)
    
+      generates the xml for this component.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from DIV:
+      __delitem__,
+      __getitem__,
+      __init__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update
+      
    
+    
        
    Inherited from DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        tag = 'html'
+    
    
+       
+    
+        strict = '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict/...
+    
    
+       
+    
+        transitional = '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 T...
+    
    
+       
+    
+        frameset = '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Frame...
+    
    
+       
+    
+        xmlns = 'http://www.w3.org/1999/xhtml'
+    
    
+    
    Inherited from DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    xml(self)
+  
    
+      		source code 
+    
    
+  
+  generates the xml for this component.
+  
    
+    
    Overrides:
+      DIV.xml
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    strict
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +'''<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://ww\
+w.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
+'''
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    transitional
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +'''<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "htt\
+p://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+'''
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    frameset
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +'''<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Frameset//EN" "http://\
+www.w3.org/TR/xhtml1/DTD/xhtml1-frameset.dtd">
+'''
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.XML-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.XML-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.XML-class.html
@@ -0,0 +1,567 @@
+
+
+
+
+  web2py.gluon.html.XML
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class XML
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class XML
    source code

    
+
    +  object --+    
+           |    
+XmlComponent --+
+               |
+              XML
+
    
+
+
    
+
    use it to wrap a string that contains XML/HTML so that it will not be 
+  escaped by the template
    
+  example:
+
    +>>> XML('<h1>Hello</h1>').xml()
+'<h1>Hello</h1>'


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        text,
+        sanitize=True,
+        permitted_tags=['a', 'b', 'blockquote', 'br/', 'i', 'li', 'ol', 'ul', 'p', 'c...,
+        allowed_attributes={'a': ['href', 'title'], 'blockquote': ['type'], 'img': ['src'...)
    
+      :param text: the XML text
+:param sanitize: sanitize text using the permitted tags and allowed
+    attributes (default False)
+:param permitted_tags: list of permitted tags (default: simple list of
+    tags)
+:param allowed_attributes: dictionary of allowed attributed (default
+    for A, IMG and BlockQuote).    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    xml(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __str__(self)
    
+      str(x)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __add__(self,
+        other)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __radd__(self,
+        other)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __cmp__(self,
+        other)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __hash__(self)
    
+      hash(x)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getattr__(self,
+        name)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getitem__(self,
+        i)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getslice__(self,
+        i,
+        j)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __iter__(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __len__(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    flatten(self,
+        render=1)
    
+      return the text stored by the XML object rendered by the render 
+      function    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    elements(self,
+        *args,
+        **kargs)
    
+      to be considered experimental since the behavior of this method is
+      questionable another options could be 
+      TAG(self.text).elements(*args,**kargs)    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        text,
+        sanitize=True,
+        permitted_tags=['a', 'b', 'blockquote', 'br/', 'i', 'li', 'ol', 'ul', 'p', 'c...,
+        allowed_attributes={'a': ['href', 'title'], 'blockquote': ['type'], 'img': ['src'...)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
    +
+:param text: the XML text
+:param sanitize: sanitize text using the permitted tags and allowed
+    attributes (default False)
+:param permitted_tags: list of permitted tags (default: simple list of
+    tags)
+:param allowed_attributes: dictionary of allowed attributed (default
+    for A, IMG and BlockQuote).
+    The key is the tag; the value is a list of allowed attributes.
+
+
    
+  
    
+    
    Overrides:
+      object.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    xml(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      XmlComponent.xml
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __str__(self)
+    
    (Informal representation operator)
+  
    
+      		source code 
+    
    
+  
+  str(x)
+  
    
+    
    Overrides:
+      object.__str__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __hash__(self)
+    
    (Hashing function)
+  
    
+      		source code 
+    
    
+  
+  hash(x)
+  
    
+    
    Overrides:
+      object.__hash__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.XmlComponent-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.XmlComponent-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.XmlComponent-class.html
@@ -0,0 +1,208 @@
+
+
+
+
+  web2py.gluon.html.XmlComponent
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class XmlComponent
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class XmlComponent
    source code

    
+
    +object --+
+         |
+        XmlComponent
+
    
+
+
    Known Subclasses:
    
+
    
+    DIV,
+    MARKMIN,
+    XML,
+    __TAG__
+
    
+
+
    
+Abstract root for all Html components

    
+
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    xml(self)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.__TAG__-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.__TAG__-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.__TAG__-class.html
@@ -0,0 +1,244 @@
+
+
+
+
+  web2py.gluon.html.__TAG__
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class __TAG__
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class __TAG__
    source code

    
+
    +  object --+    
+           |    
+XmlComponent --+
+               |
+              __TAG__
+
    
+
+
    
+TAG factory example:
+
    +   >>> print TAG.first(TAG.second('test'), _key = 3)
+   <first key="3"><second>test</second></first>
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getitem__(self,
+        name)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getattr__(self,
+        name)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        html)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from XmlComponent:
+      xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.html.web2pyHTMLParser-class.html
Index: applications/examples/static/epydoc/web2py.gluon.html.web2pyHTMLParser-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.html.web2pyHTMLParser-class.html
@@ -0,0 +1,489 @@
+
+
+
+
+  web2py.gluon.html.web2pyHTMLParser
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module html ::
+        Class web2pyHTMLParser
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class web2pyHTMLParser
    source code

    
+
    +markupbase.ParserBase --+    
+                        |    
+    HTMLParser.HTMLParser --+
+                            |
+                           web2pyHTMLParser
+
    
+
+
    
+obj = web2pyHTMLParser(text) parses and html/xml text into web2py 
+  helpers. obj.tree contains the root of the tree, and tree can be 
+  manipulated
+
    +>>> str(web2pyHTMLParser('hello<div a="b" c=3>wor&lt;ld<span>xxx</span>y<script/>yy</div>zzz').tree)
+'hello<div a="b" c="3">wor&lt;ld<span>xxx</span>y<script></script>yy</div>zzz'
+>>> str(web2pyHTMLParser('<div>a<span>b</div>c').tree)
+'<div>a<span>b</span></div>c'
+>>> tree = web2pyHTMLParser('hello<div a="b">world</div>').tree
+>>> tree.element(_a='b')['_c']=5
+>>> str(tree)
+'hello<div a="b" c="5">world</div>'


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        text,
+        closed=('input', 'link'))
    
+      Initialize and reset this instance.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    handle_starttag(self,
+        tagname,
+        attrs)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    handle_data(self,
+        data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    handle_charref(self,
+        name)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    handle_entityref(self,
+        name)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    handle_endtag(self,
+        tagname)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from HTMLParser.HTMLParser:
+      check_for_whole_start_tag,
+      clear_cdata_mode,
+      close,
+      error,
+      feed,
+      get_starttag_text,
+      goahead,
+      handle_comment,
+      handle_decl,
+      handle_pi,
+      handle_startendtag,
+      parse_endtag,
+      parse_pi,
+      parse_starttag,
+      reset,
+      set_cdata_mode,
+      unescape,
+      unknown_decl
+      
    
+    
    Inherited from markupbase.ParserBase:
+      getpos,
+      parse_comment,
+      parse_declaration,
+      parse_marked_section,
+      updatepos
+      
    
+    
        
    Inherited from markupbase.ParserBase (private):
+      _parse_doctype_attlist,
+      _parse_doctype_element,
+      _parse_doctype_entity,
+      _parse_doctype_notation,
+      _parse_doctype_subset,
+      _scan_name
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+    
    Inherited from HTMLParser.HTMLParser:
+      CDATA_CONTENT_ELEMENTS
+      
    
+    
        
    Inherited from markupbase.ParserBase (private):
+      _decl_otherchars
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        text,
+        closed=('input', 'link'))
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  Initialize and reset this instance.
+  
    
+    
    Overrides:
+      HTMLParser.HTMLParser.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    handle_starttag(self,
+        tagname,
+        attrs)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      HTMLParser.HTMLParser.handle_starttag
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    handle_data(self,
+        data)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      HTMLParser.HTMLParser.handle_data
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    handle_charref(self,
+        name)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      HTMLParser.HTMLParser.handle_charref
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    handle_entityref(self,
+        name)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      HTMLParser.HTMLParser.handle_entityref
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    handle_endtag(self,
+        tagname)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      HTMLParser.HTMLParser.handle_endtag
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.http-module.html
Index: applications/examples/static/epydoc/web2py.gluon.http-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.http-module.html
@@ -0,0 +1,265 @@
+
+
+
+
+  web2py.gluon.http
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module http
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module http
    source code

    
+This file is part of the web2py Web Framework Copyrighted by Massimo 
+  Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        BaseException
    
+      Common base class for all non-exit exceptions.
+    
    
+       
+    
+        HTTP
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    redirect(location,
+        how=303)
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        defined_status = {200: 'OK', 201: 'CREATED', 202: 'ACCEPTED', ...
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Variables Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    defined_status
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{200: 'OK',
+ 201: 'CREATED',
+ 202: 'ACCEPTED',
+ 203: 'NON-AUTHORITATIVE INFORMATION',
+ 204: 'NO CONTENT',
+ 205: 'RESET CONTENT',
+ 206: 'PARTIAL CONTENT',
+ 301: 'MOVED PERMANENTLY',
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.http-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.http-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.http-pysrc.html
@@ -0,0 +1,253 @@
+
+
+
+
+  web2py.gluon.http
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module http
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.http
    
+
    +  1  #!/usr/bin/env python 
+  2  # -*- coding: utf-8 -*- 
+  3   
+  4  """ 
+  5  This file is part of the web2py Web Framework 
+  6  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+  7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+  8  """ 
+  9   
+ 10  __all__ = ['HTTP', 'redirect'] 
+ 11   
+ 12  defined_status = { 
+ 13      200: 'OK', 
+ 14      201: 'CREATED', 
+ 15      202: 'ACCEPTED', 
+ 16      203: 'NON-AUTHORITATIVE INFORMATION', 
+ 17      204: 'NO CONTENT', 
+ 18      205: 'RESET CONTENT', 
+ 19      206: 'PARTIAL CONTENT', 
+ 20      301: 'MOVED PERMANENTLY', 
+ 21      302: 'FOUND', 
+ 22      303: 'SEE OTHER', 
+ 23      304: 'NOT MODIFIED', 
+ 24      305: 'USE PROXY', 
+ 25      307: 'TEMPORARY REDIRECT', 
+ 26      400: 'BAD REQUEST', 
+ 27      401: 'UNAUTHORIZED', 
+ 28      403: 'FORBIDDEN', 
+ 29      404: 'NOT FOUND', 
+ 30      405: 'METHOD NOT ALLOWED', 
+ 31      406: 'NOT ACCEPTABLE', 
+ 32      407: 'PROXY AUTHENTICATION REQUIRED', 
+ 33      408: 'REQUEST TIMEOUT', 
+ 34      409: 'CONFLICT', 
+ 35      410: 'GONE', 
+ 36      411: 'LENGTH REQUIRED', 
+ 37      412: 'PRECONDITION FAILED', 
+ 38      413: 'REQUEST ENTITY TOO LARGE', 
+ 39      414: 'REQUEST-URI TOO LONG', 
+ 40      415: 'UNSUPPORTED MEDIA TYPE', 
+ 41      416: 'REQUESTED RANGE NOT SATISFIABLE', 
+ 42      417: 'EXPECTATION FAILED', 
+ 43      500: 'INTERNAL SERVER ERROR', 
+ 44      501: 'NOT IMPLEMENTED', 
+ 45      502: 'BAD GATEWAY', 
+ 46      503: 'SERVICE UNAVAILABLE', 
+ 47      504: 'GATEWAY TIMEOUT', 
+ 48      505: 'HTTP VERSION NOT SUPPORTED', 
+ 49      } 
+ 50   
+ 51  # If web2py is executed with python2.4 we need 
+ 52  # to use Exception instead of BaseException 
+ 53   
+ 54  try: 
+ 55      BaseException 
+ 56  except NameError: 
+ 57      BaseException = Exception 
+ 58   
+ 59   
+
     60 -class HTTP(BaseException): 
+
     61   
+
     62 -    def __init__( 
+ 63          self, 
+ 64          status, 
+ 65          body='', 
+ 66          **headers 
+ 67          ): 
+
     68          self.status = status 
+ 69          self.body = body 
+ 70          self.headers = headers 
+
     71   
+
     72 -    def to(self, responder): 
+
     73          if self.status in defined_status: 
+ 74              status = '%d %s' % (self.status, defined_status[self.status]) 
+ 75          else: 
+ 76              status = str(self.status) + ' ' 
+ 77          if not 'Content-Type' in self.headers: 
+ 78              self.headers['Content-Type'] = 'text/html; charset=UTF-8' 
+ 79          body = self.body 
+ 80          if status[:1] == '4': 
+ 81              if not body: 
+ 82                  body = status 
+ 83              if isinstance(body, str): 
+ 84                  if len(body)<512 and self.headers['Content-Type'].startswith('text/html'): 
+ 85                      body += '<!-- %s //-->' % ('x'*512) ### trick IE 
+ 86                  self.headers['Content-Length'] = len(body) 
+ 87          headers = [] 
+ 88          for (k, v) in self.headers.items(): 
+ 89              if isinstance(v, list): 
+ 90                  for item in v: 
+ 91                      headers.append((k, str(item))) 
+ 92              else: 
+ 93                  headers.append((k, str(v))) 
+ 94          responder(status, headers) 
+ 95          if hasattr(body, '__iter__') and not isinstance(self.body, str): 
+ 96              return body 
+ 97          return [str(body)] 
+
     98   
+ 99      @property 
+
    100 -    def message(self): 
+
    101          ''' 
+102          compose a message describing this exception 
+103   
+104          "status defined_status [web2py_error]" 
+105   
+106          message elements that are not defined are omitted 
+107          ''' 
+108          msg = '%(status)d' 
+109          if self.status in defined_status: 
+110              msg = '%(status)d %(defined_status)s' 
+111          if 'web2py_error' in self.headers: 
+112              msg += ' [%(web2py_error)s]' 
+113          return msg % dict(status=self.status, 
+114                            defined_status=defined_status.get(self.status), 
+115                            web2py_error=self.headers.get('web2py_error')) 
+
    116   
+
    117 -    def __str__(self): 
+
    118          "stringify me" 
+119          return self.message 
+
    120   
+121   
+
    122 -def redirect(location, how=303): 
+
    123      location = location.replace('\r', '%0D').replace('\n', '%0A') 
+124      raise HTTP(how, 
+125                 'You are being redirected <a href="%s">here</a>' % location, 
+126                 Location=location) 
+
    127   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:04 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.http.HTTP-class.html
Index: applications/examples/static/epydoc/web2py.gluon.http.HTTP-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.http.HTTP-class.html
@@ -0,0 +1,373 @@
+
+
+
+
+  web2py.gluon.http.HTTP
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module http ::
+        Class HTTP
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class HTTP
    source code

    
+
    +              object --+    
+                       |    
+exceptions.BaseException --+
+                           |
+                          HTTP
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        status,
+        body='',
+        **headers)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    to(self,
+        responder)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __str__(self)
    
+      stringify me    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __new__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+       
+    
+        message
    
+      compose a message describing this exception
+    
    
+    
    Inherited from exceptions.BaseException:
+      args
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        status,
+        body='',
+        **headers)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      exceptions.BaseException.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __str__(self)
+    
    (Informal representation operator)
+  
    
+      		source code 
+    
    
+  
+  stringify me
+  
    
+    
    Overrides:
+      exceptions.BaseException.__str__
+    
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Property Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    message
    
+  
    compose a message describing this exception
    
+  
    "status defined_status [web2py_error]"
    
+  message elements that are not defined are omitted
+  
    
+    
    Get Method:
    
+    
    unreachable.message(self)
+        - compose a message describing this exception
+    
    
+    
    Set Method:
    
+    
    +1
+
    
+
+        - PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+    
    Delete Method:
    
+    
    +1
+
    
+
+        - PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.import_all-module.html
Index: applications/examples/static/epydoc/web2py.gluon.import_all-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.import_all-module.html
@@ -0,0 +1,365 @@
+
+
+
+
+  web2py.gluon.import_all
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module import_all
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module import_all
    source code

    
+
    This file is part of the web2py Web Framework Copyrighted by Massimo 
+  Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)
    
+  
    This file is not strictly required by web2py. It is used for three 
+  purposes:
    
+  1) check that all required modules are installed properly 2) provide 
+  py2exe and py2app a list of modules to be packaged in the binary 3) 
+  (optional) preload modules in memory to speed up http responses

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        contributed_modules = ['gluon.myregex', 'gluon.contenttype', '...
+    
    
+       
+    
+        python_version = '2.5'
+    
    
+       
+    
+        alert_dependency = ['hashlib', 'uuid']
+    
    
+       
+    
+        py26_deprecated = ['mhlib', 'multifile', 'mimify', 'sets', 'Mi...
+    
    
+       
+    
+        py27_deprecated = []
+    
    
+       
+    
+        base_modules = ['aifc', 'anydbm', 'array', 'asynchat', 'asynco...
+    
    
+       
+    
+        candidate = 'gluon.contrib.pyrtf.Renderer'
+    
    
+       
+    
+        dirs = []
+    
    
+       
+    
+        files = ['test_router.pyc', 'test_template.py', 'test_cache.py...
+    
    
+       
+    
+        module = 'gluon.contrib.pyrtf.Renderer'
+    
    
+       
+    
+        name = 'test_utils.py'
+    
    
+       
+    
+        root = 'gluon/tests'
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Variables Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    contributed_modules
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +['gluon.myregex',
+ 'gluon.contenttype',
+ 'gluon.http',
+ 'gluon.sanitizer',
+ 'gluon.cache',
+ 'gluon.serializers',
+ 'gluon.decoder',
+ 'gluon.main',
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    py26_deprecated
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +['mhlib', 'multifile', 'mimify', 'sets', 'MimeWriter']
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    base_modules
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +['aifc',
+ 'anydbm',
+ 'array',
+ 'asynchat',
+ 'asyncore',
+ 'atexit',
+ 'audioop',
+ 'base64',
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    files
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +['test_router.pyc',
+ 'test_template.py',
+ 'test_cache.pyc',
+ 'test_html.pyc',
+ 'test_template.pyc',
+ 'test_is_url.py',
+ 'test_cache.py',
+ 'test_utils.pyc',
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.import_all-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.import_all-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.import_all-pysrc.html
@@ -0,0 +1,233 @@
+
+
+
+
+  web2py.gluon.import_all
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module import_all
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.import_all
    
+
    +  1  #!/usr/bin/env python 
+  2   
+  3  """ 
+  4  This file is part of the web2py Web Framework 
+  5  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+  6  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+  7   
+  8  This file is not strictly required by web2py. It is used for three purposes: 
+  9   
+ 10  1) check that all required modules are installed properly 
+ 11  2) provide py2exe and py2app a list of modules to be packaged in the binary 
+ 12  3) (optional) preload modules in memory to speed up http responses 
+ 13   
+ 14  """ 
+ 15   
+ 16  import os 
+ 17  import sys 
+ 18   
+ 19  base_modules = ['aifc', 'anydbm', 'array', 'asynchat', 'asyncore', 'atexit', 
+ 20                  'audioop', 'base64', 'BaseHTTPServer', 'Bastion', 'binascii', 
+ 21                  'binhex', 'bisect', 'bz2', 'calendar', 'cgi', 'CGIHTTPServer', 
+ 22                  'cgitb', 'chunk', 'cmath', 'cmd', 'code', 'codecs', 'codeop', 
+ 23                  'collections', 'colorsys', 'compileall', 'compiler', 
+ 24                  'compiler.ast', 'compiler.visitor', 'ConfigParser', 
+ 25                  'contextlib', 'Cookie', 'cookielib', 'copy', 'copy_reg', 
+ 26                  'cPickle', 'cProfile', 'cStringIO', 'csv', 'ctypes', 
+ 27                  'datetime', 'decimal', 'difflib', 'dircache', 'dis', 
+ 28                  'doctest', 'DocXMLRPCServer', 'dumbdbm', 'dummy_thread', 
+ 29                  'dummy_threading', 'email', 'email.charset', 'email.encoders', 
+ 30                  'email.errors', 'email.generator', 'email.header', 
+ 31                  'email.iterators', 'email.message', 'email.mime', 
+ 32                  'email.mime.audio', 'email.mime.base', 'email.mime.image', 
+ 33                  'email.mime.message', 'email.mime.multipart', 
+ 34                  'email.mime.nonmultipart', 'email.mime.text', 'email.parser', 
+ 35                  'email.utils', 'encodings.idna', 'errno', 'exceptions', 
+ 36                  'filecmp', 'fileinput', 'fnmatch', 'formatter', 'fpformat', 
+ 37                  'ftplib', 'functools', 'gc', 'getopt', 'getpass', 'gettext', 
+ 38                  'glob', 'gzip', 'hashlib', 'heapq', 'hmac', 'hotshot', 
+ 39                  'hotshot.stats', 'htmlentitydefs', 'htmllib', 'HTMLParser', 
+ 40                  'httplib', 'imaplib', 'imghdr', 'imp', 'inspect', 
+ 41                  'itertools', 'keyword', 'linecache', 'locale', 'logging', 
+ 42                  'macpath', 'mailbox', 'mailcap', 'marshal', 'math', 
+ 43                  'mimetools', 'mimetypes', 'mmap', 'modulefinder', 'mutex', 
+ 44                  'netrc', 'new', 'nntplib', 'operator', 'optparse', 'os', 
+ 45                  'parser', 'pdb', 'pickle', 'pickletools', 'pkgutil', 
+ 46                  'platform', 'poplib', 'pprint', 'py_compile', 'pyclbr', 
+ 47                  'pydoc', 'Queue', 'quopri', 'random', 're', 'repr', 
+ 48                  'rexec', 'rfc822', 'rlcompleter', 'robotparser', 'runpy', 
+ 49                  'sched', 'select', 'sgmllib', 'shelve', 
+ 50                  'shlex', 'shutil', 'signal', 'SimpleHTTPServer', 
+ 51                  'SimpleXMLRPCServer', 'site', 'smtpd', 'smtplib', 
+ 52                  'sndhdr', 'socket', 'SocketServer', 'sqlite3', 
+ 53                  'stat', 'statvfs', 'string', 'StringIO', 
+ 54                  'stringprep', 'struct', 'subprocess', 'sunau', 'symbol', 
+ 55                  'tabnanny', 'tarfile', 'telnetlib', 'tempfile', 'textwrap', 'thread', 'threading', 
+ 56                  'time', 'timeit', 'Tix', 'Tkinter', 'token', 
+ 57                  'tokenize', 'trace', 'traceback', 'types', 
+ 58                  'unicodedata', 'unittest', 'urllib', 'urllib2', 
+ 59                  'urlparse', 'user', 'UserDict', 'UserList', 'UserString', 
+ 60                  'uu', 'uuid', 'warnings', 'wave', 'weakref', 'webbrowser', 
+ 61                  'whichdb', 'wsgiref', 'wsgiref.handlers', 'wsgiref.headers', 
+ 62                  'wsgiref.simple_server', 'wsgiref.util', 'wsgiref.validate', 
+ 63                  'xdrlib', 'xml.dom', 'xml.dom.minidom', 'xml.dom.pulldom', 
+ 64                  'xml.etree.ElementTree', 'xml.parsers.expat', 'xml.sax', 
+ 65                  'xml.sax.handler', 'xml.sax.saxutils', 'xml.sax.xmlreader', 
+ 66                  'xmlrpclib', 'zipfile', 'zipimport', 'zlib', 'mhlib', 
+ 67                  'MimeWriter', 'mimify', 'multifile', 'sets'] 
+ 68   
+ 69  contributed_modules = [] 
+ 70  for root, dirs, files in os.walk('gluon'): 
+ 71      for candidate in ['.'.join( 
+ 72        os.path.join(root, os.path.splitext(name)[0]).split(os.sep)) 
+ 73        for name in files if name.endswith('.py') 
+ 74          and root.split(os.sep) != ['gluon', 'tests'] 
+ 75        ]: 
+ 76          contributed_modules.append(candidate) 
+ 77   
+ 78  # Python base version 
+ 79  python_version = sys.version[:3] 
+ 80   
+ 81  # Modules which we want to raise an Exception if they are missing 
+ 82  alert_dependency = ['hashlib', 'uuid'] 
+ 83   
+ 84  # Now we remove the blacklisted modules if we are using the stated 
+ 85  # python version. 
+ 86  # 
+ 87  # List of modules deprecated in Python 2.6 or 2.7 that are in the above set 
+ 88  py26_deprecated = ['mhlib', 'multifile', 'mimify', 'sets', 'MimeWriter'] 
+ 89  py27_deprecated = [] # ['optparse'] but we need it for now 
+ 90   
+ 91  if python_version >= '2.6': 
+ 92      base_modules += ['json', 'multiprocessing'] 
+ 93      base_modules = list(set(base_modules).difference(set(py26_deprecated))) 
+ 94   
+ 95  if python_version >= '2.7': 
+ 96      base_modules += ['argparse'] 
+ 97      base_modules = list(set(base_modules).difference(set(py27_deprecated))) 
+ 98   
+ 99  # Now iterate in the base_modules, trying to do the import 
+100  for module in base_modules + contributed_modules: 
+101      try: 
+102           __import__(module, globals(), locals(), []) 
+103      except: 
+104          # Raise an exception if the current module is a dependency 
+105          if module in alert_dependency: 
+106              msg = "Missing dependency: %(module)s\n" % locals() 
+107              msg += "Try the following command: " 
+108              msg += "easy_install-%(python_version)s -U %(module)s" % locals() 
+109              raise ImportError, msg 
+110   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:07 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.languages-module.html
Index: applications/examples/static/epydoc/web2py.gluon.languages-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.languages-module.html
@@ -0,0 +1,493 @@
+
+
+
+
+  web2py.gluon.languages
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module languages
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module languages
    source code

    
+This file is part of the web2py Web Framework Copyrighted by Massimo 
+  Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        lazyT
    
+      never to be called explicitly, returned by 
+        translator.__call__
+    
    
+       
+    
+        translator
    
+      this class is instantiated by gluon.compileapp.build_environment
+        as the T object
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    read_dict_aux(filename)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    read_dict(filename)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    utf8_repr(s)
    
+      # note that we use raw strings to avoid having to use double back 
+      slashes below    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    write_dict(filename,
+        contents)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    findT(path,
+        language='en-us')
    
+      must be run by the admin app    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    lazyT_unpickle(data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    lazyT_pickle(data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    update_all_languages(application_path)
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        is_gae = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        PY_STRING_LITERAL_RE = '(?<=[^\\w]T\\()(?P<name>[uU]?[rR]?(?:\...
+    
    
+       
+    
+        regex_translate = re.compile(r'(?s)(?<=[^\w]T\()(?P<name>[uU]?...
+    
    
+       
+    
+        regex_language = re.compile(r'^[a-zA-Z]{2}(-[a-zA-Z]{2})?(-[a-...
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Function Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    utf8_repr(s)
+  
    
+      		source code 
+    
    
+  
+  
    # note that we use raw strings to avoid having to use double back 
+  slashes below
    
+  
    utf8_repr() works same as repr() when processing ascii string 
+  >>> utf8_repr('abc') == utf8_repr("abc") == 
+  repr('abc') == repr("abc") == "'abc'" True 
+  >>> utf8_repr('a"b"c') == repr('a"b"c') == 
+  '\'a"b"c\'' True >>> utf8_repr("a'b'c") == 
+  repr("a'b'c") == '"a\'b\'c"' True >>> 
+  utf8_repr('a\'b"c') == repr('a\'b"c') == 
+  utf8_repr("a'b\"c") == repr("a'b\"c") == 
+  '\'a\\\'b"c\'' True >>> utf8_repr('a\r\nb') == 
+  repr('a\r\nb') == "'a\\r\\nb'" # Test for \r, \n True
    
+  Unlike repr(), utf8_repr() remains utf8 content when processing utf8 
+  string >>> utf8_repr('中文字') == utf8_repr("中文字") == 
+  "'中文字'" != repr('中文字') True >>> 
+  utf8_repr('中"文"字') == "'中\"文\"字'" != 
+  repr('中"文"字') True >>> utf8_repr("中'文'字") ==
+  '"中\'文\'字"' != repr("中'文'字") True >>> 
+  utf8_repr('中\'文"字') == utf8_repr("中'文\"字") == 
+  '\'中\\\'文"字\'' != repr('中\'文"字') == 
+  repr("中'文\"字") True >>> utf8_repr('中\r\n文') == 
+  "'中\\r\\n文'" != repr('中\r\n文') # Test for \r, \n True
+  
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Variables Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    PY_STRING_LITERAL_RE
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +'(?<=[^\\w]T\\()(?P<name>[uU]?[rR]?(?:\'\'\'(?:[^\']|\'{1,2}(?!\'))*\'\
+\'\')|(?:\'(?:[^\'\\\\]|\\\\.)*\')|(?:"""(?:[^"]|"{1,2}(?!"))*""")|(?:\
+"(?:[^"\\\\]|\\\\.)*"))'
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    regex_translate
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +re.compile(r'(?s)(?<=[^\w]T\()(?P<name>[uU]?[rR]?(?:\'\'\'(?:[^\']|\'{\
+1,2}(?!\'))*\'\'\')|(?:\'(?:[^\'\\]|\\.)*\')|(?:"""(?:[^"]|"{1,2}(?!")\
+)*""")|(?:"(?:[^"\\]|\\.)*"))')
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    regex_language
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +re.compile(r'^[a-zA-Z]{2}(-[a-zA-Z]{2})?(-[a-zA-Z]+)?$')
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.languages-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.languages-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.languages-pysrc.html
@@ -0,0 +1,515 @@
+
+
+
+
+  web2py.gluon.languages
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module languages
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.languages
    
+
    +  1  #!/usr/bin/env python 
+  2  # -*- coding: utf-8 -*- 
+  3   
+  4  """ 
+  5  This file is part of the web2py Web Framework 
+  6  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+  7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+  8  """ 
+  9   
+ 10  import os 
+ 11  import re 
+ 12  import cgi 
+ 13  import portalocker 
+ 14  import logging 
+ 15  import marshal 
+ 16  import copy_reg 
+ 17  from fileutils import listdir 
+ 18  import settings 
+ 19  from cfs import getcfs 
+ 20   
+ 21  __all__ = ['translator', 'findT', 'update_all_languages'] 
+ 22   
+ 23  is_gae = settings.global_settings.web2py_runtime_gae 
+ 24   
+ 25  # pattern to find T(blah blah blah) expressions 
+ 26   
+ 27  PY_STRING_LITERAL_RE = r'(?<=[^\w]T\()(?P<name>'\ 
+ 28       + r"[uU]?[rR]?(?:'''(?:[^']|'{1,2}(?!'))*''')|"\ 
+ 29       + r"(?:'(?:[^'\\]|\\.)*')|" + r'(?:"""(?:[^"]|"{1,2}(?!"))*""")|'\ 
+ 30       + r'(?:"(?:[^"\\]|\\.)*"))' 
+ 31   
+ 32  regex_translate = re.compile(PY_STRING_LITERAL_RE, re.DOTALL) 
+ 33   
+ 34  # patter for a valid accept_language 
+ 35   
+ 36  regex_language = \ 
+ 37      re.compile('^[a-zA-Z]{2}(\-[a-zA-Z]{2})?(\-[a-zA-Z]+)?$') 
+ 38   
+ 39   
+
     40 -def read_dict_aux(filename): 
+
     41      fp = open(filename, 'r') 
+ 42      portalocker.lock(fp, portalocker.LOCK_SH) 
+ 43      lang_text = fp.read().replace('\r\n', '\n') 
+ 44      portalocker.unlock(fp) 
+ 45      fp.close() 
+ 46      if not lang_text.strip(): 
+ 47          return {} 
+ 48      try: 
+ 49          return eval(lang_text) 
+ 50      except: 
+ 51          logging.error('Syntax error in %s' % filename) 
+ 52          return {} 
+
     53   
+
     54 -def read_dict(filename): 
+
     55      return getcfs('language:%s'%filename,filename, 
+ 56                    lambda filename=filename:read_dict_aux(filename)) 
+
     57   
+
     58 -def utf8_repr(s): 
+
     59      r''' # note that we use raw strings to avoid having to use double back slashes below 
+ 60   
+ 61      utf8_repr() works same as repr() when processing ascii string 
+ 62      >>> utf8_repr('abc') == utf8_repr("abc") == repr('abc') == repr("abc") == "'abc'" 
+ 63      True 
+ 64      >>> utf8_repr('a"b"c') == repr('a"b"c') == '\'a"b"c\'' 
+ 65      True 
+ 66      >>> utf8_repr("a'b'c") == repr("a'b'c") == '"a\'b\'c"' 
+ 67      True 
+ 68      >>> utf8_repr('a\'b"c') == repr('a\'b"c') == utf8_repr("a'b\"c") == repr("a'b\"c") == '\'a\\\'b"c\'' 
+ 69      True 
+ 70      >>> utf8_repr('a\r\nb') == repr('a\r\nb') == "'a\\r\\nb'" # Test for \r, \n 
+ 71      True 
+ 72   
+ 73      Unlike repr(), utf8_repr() remains utf8 content when processing utf8 string 
+ 74      >>> utf8_repr('中文字') == utf8_repr("中文字") == "'中文字'" != repr('中文字') 
+ 75      True 
+ 76      >>> utf8_repr('中"文"字') == "'中\"文\"字'" != repr('中"文"字') 
+ 77      True 
+ 78      >>> utf8_repr("中'文'字") == '"中\'文\'字"' != repr("中'文'字") 
+ 79      True 
+ 80      >>> utf8_repr('中\'文"字') == utf8_repr("中'文\"字") == '\'中\\\'文"字\'' != repr('中\'文"字') == repr("中'文\"字") 
+ 81      True 
+ 82      >>> utf8_repr('中\r\n文') == "'中\\r\\n文'" != repr('中\r\n文') # Test for \r, \n 
+ 83      True 
+ 84      ''' 
+ 85      if (s.find("'") >= 0) and (s.find('"') < 0): # only single quote exists 
+ 86          s = ''.join(['"', s, '"']) # s = ''.join(['"', s.replace('"','\\"'), '"']) 
+ 87      else: 
+ 88          s = ''.join(["'", s.replace("'","\\'"), "'"]) 
+ 89      return s.replace("\n","\\n").replace("\r","\\r") 
+
     90   
+ 91   
+
     92 -def write_dict(filename, contents): 
+
     93      try: 
+ 94          fp = open(filename, 'w') 
+ 95      except IOError: 
+ 96          logging.error('Unable to write to file %s' % filename) 
+ 97          return 
+ 98      portalocker.lock(fp, portalocker.LOCK_EX) 
+ 99      fp.write('# coding: utf8\n{\n') 
+100      for key in sorted(contents): 
+101          fp.write('%s: %s,\n' % (utf8_repr(key), utf8_repr(contents[key]))) 
+102      fp.write('}\n') 
+103      portalocker.unlock(fp) 
+104      fp.close() 
+
    105   
+106   
+
    107 -class lazyT(object): 
+
    108   
+109      """ 
+110      never to be called explicitly, returned by translator.__call__ 
+111      """ 
+112   
+113      m = None 
+114      s = None 
+115      T = None 
+116   
+
    117 -    def __init__( 
+118          self, 
+119          message, 
+120          symbols = {}, 
+121          T = None, 
+122          ): 
+
    123          self.m = message 
+124          self.s = symbols 
+125          self.T = T 
+
    126   
+
    127 -    def __repr__(self): 
+
    128          return "<lazyT %s>" % (repr(str(self.m)), ) 
+
    129   
+
    130 -    def __str__(self): 
+
    131          return self.T.translate(self.m, self.s) 
+
    132   
+
    133 -    def __eq__(self, other): 
+
    134          return self.T.translate(self.m, self.s) == other 
+
    135   
+
    136 -    def __ne__(self, other): 
+
    137          return self.T.translate(self.m, self.s) != other 
+
    138   
+
    139 -    def __add__(self, other): 
+
    140          return '%s%s' % (self, other) 
+
    141   
+
    142 -    def __radd__(self, other): 
+
    143          return '%s%s' % (other, self) 
+
    144   
+
    145 -    def __cmp__(self,other): 
+
    146          return cmp(str(self),str(other)) 
+
    147   
+
    148 -    def __hash__(self): 
+
    149          return hash(str(self)) 
+
    150   
+
    151 -    def __getattr__(self, name): 
+
    152          return getattr(str(self),name) 
+
    153   
+
    154 -    def __getitem__(self, i): 
+
    155          return str(self)[i] 
+
    156   
+
    157 -    def __getslice__(self, i, j): 
+
    158          return str(self)[i:j] 
+
    159   
+
    160 -    def __iter__(self): 
+
    161          for c in str(self): yield c 
+
    162   
+
    163 -    def __len__(self): 
+
    164          return len(str(self)) 
+
    165   
+
    166 -    def xml(self): 
+
    167          return cgi.escape(str(self)) 
+
    168   
+
    169 -    def encode(self, *a, **b): 
+
    170          return str(self).encode(*a, **b) 
+
    171   
+
    172 -    def decode(self, *a, **b): 
+
    173          return str(self).decode(*a, **b) 
+
    174   
+
    175 -    def read(self): 
+
    176          return str(self) 
+
    177   
+
    178 -    def __mod__(self, symbols): 
+
    179          return self.T.translate(self.m, symbols) 
+
    180   
+181   
+
    182 -class translator(object): 
+
    183   
+184      """ 
+185      this class is instantiated by gluon.compileapp.build_environment 
+186      as the T object 
+187   
+188      :: 
+189   
+190          T.force(None) # turns off translation 
+191          T.force('fr, it') # forces web2py to translate using fr.py or it.py 
+192   
+193          T(\"Hello World\") # translates \"Hello World\" using the selected file 
+194   
+195      notice 1: there is no need to force since, by default, T uses 
+196      accept_language to determine a translation file. 
+197   
+198      notice 2: en and en-en are considered different languages! 
+199      """ 
+200   
+
    201 -    def __init__(self, request): 
+
    202          self.request = request 
+203          self.folder = request.folder 
+204          self.current_languages = ['en'] 
+205          self.accepted_language = None 
+206          self.language_file = None 
+207          self.http_accept_language = request.env.http_accept_language 
+208          self.requested_languages = self.force(self.http_accept_language) 
+209          self.lazy = True 
+210          self.otherTs = {} 
+
    211   
+
    212 -    def get_possible_languages(self): 
+
    213          possible_languages = self.current_languages 
+214          file_ending = re.compile("\.py$") 
+215          for langfile in os.listdir(os.path.join(self.folder,'languages')): 
+216              if file_ending.search(langfile): 
+217                  possible_languages.append(file_ending.sub('',langfile)) 
+218          return possible_languages 
+
    219   
+
    220 -    def set_current_languages(self, *languages): 
+
    221          if len(languages) == 1 and isinstance(languages[0], (tuple, list)): 
+222              languages = languages[0] 
+223          self.current_languages = languages 
+224          self.force(self.http_accept_language) 
+
    225   
+
    226 -    def force(self, *languages): 
+
    227          if not languages or languages[0] == None: 
+228              languages = [] 
+229          if len(languages) == 1 and isinstance(languages[0], (str, unicode)): 
+230              languages = languages[0] 
+231          if languages: 
+232              if isinstance(languages, (str, unicode)): 
+233                  accept_languages = languages.split(';') 
+234                  languages = [] 
+235                  [languages.extend(al.split(',')) for al in accept_languages] 
+236                  languages = [item.strip().lower() for item in languages \ 
+237                                   if regex_language.match(item.strip())] 
+238   
+239              for language in languages: 
+240                  if language in self.current_languages: 
+241                      self.accepted_language = language 
+242                      break 
+243                  filename = os.path.join(self.folder, 'languages/', language + '.py') 
+244                  if os.path.exists(filename): 
+245                      self.accepted_language = language 
+246                      self.language_file = filename 
+247                      self.t = read_dict(filename) 
+248                      return languages 
+249          self.language_file = None 
+250          self.t = {}  # ## no language by default 
+251          return languages 
+
    252   
+
    253 -    def __call__(self, message, symbols={},language=None): 
+
    254          if not language: 
+255              if self.lazy: 
+256                  return lazyT(message, symbols, self) 
+257              else: 
+258                  return self.translate(message, symbols) 
+259          else: 
+260              try: 
+261                  otherT = self.otherTs[language] 
+262              except KeyError: 
+263                  otherT = self.otherTs[language] = translator(self.request) 
+264                  otherT.force(language) 
+265              return otherT(message,symbols) 
+
    266   
+
    267 -    def translate(self, message, symbols): 
+
    268          """ 
+269          user ## to add a comment into a translation string 
+270          the comment can be useful do discriminate different possible 
+271          translations for the same string (for example different locations) 
+272   
+273          T(' hello world ') -> ' hello world ' 
+274          T(' hello world ## token') -> 'hello world' 
+275          T('hello ## world ## token') -> 'hello ## world' 
+276   
+277          the ## notation is ignored in multiline strings and strings that 
+278          start with ##. this is to allow markmin syntax to be translated 
+279          """ 
+280          if not message.startswith('#') and not '\n' in message: 
+281              tokens = message.rsplit('##', 1) 
+282          else: 
+283              # this allows markmin syntax in translations 
+284              tokens = [message] 
+285          if len(tokens) == 2: 
+286              tokens[0] = tokens[0].strip() 
+287              message = tokens[0] + '##' + tokens[1].strip() 
+288          mt = self.t.get(message, None) 
+289          if mt == None: 
+290              self.t[message] = mt = tokens[0] 
+291              if self.language_file and not is_gae: 
+292                  write_dict(self.language_file, self.t) 
+293          if symbols or symbols == 0: 
+294              return mt % symbols 
+295          return mt 
+
    296   
+297   
+
    298 -def findT(path, language='en-us'): 
+
    299      """ 
+300      must be run by the admin app 
+301      """ 
+302      filename = os.path.join(path, 'languages', '%s.py' % language) 
+303      sentences = read_dict(filename) 
+304      mp = os.path.join(path, 'models') 
+305      cp = os.path.join(path, 'controllers') 
+306      vp = os.path.join(path, 'views') 
+307      for file in listdir(mp, '.+\.py', 0) + listdir(cp, '.+\.py', 0)\ 
+308           + listdir(vp, '.+\.html', 0): 
+309          fp = open(file, 'r') 
+310          portalocker.lock(fp, portalocker.LOCK_SH) 
+311          data = fp.read() 
+312          portalocker.unlock(fp) 
+313          fp.close() 
+314          items = regex_translate.findall(data) 
+315          for item in items: 
+316              try: 
+317                  message = eval(item) 
+318                  if not message.startswith('#') and not '\n' in message: 
+319                      tokens = message.rsplit('##', 1) 
+320                  else: 
+321                      # this allows markmin syntax in translations 
+322                      tokens = [message] 
+323                  if len(tokens) == 2: 
+324                      message = tokens[0].strip() + '##' + tokens[1].strip() 
+325                  if message and not message in sentences: 
+326                      sentences[message] = message 
+327              except: 
+328                  pass 
+329      write_dict(filename, sentences) 
+
    330   
+331  ### important to allow safe session.flash=T(....) 
+
    332 -def lazyT_unpickle(data): 
+
    333      return marshal.loads(data) 
+
    334 -def lazyT_pickle(data): 
+
    335      return lazyT_unpickle, (marshal.dumps(str(data)),) 
+
    336  copy_reg.pickle(lazyT, lazyT_pickle, lazyT_unpickle) 
+337   
+
    338 -def update_all_languages(application_path): 
+
    339      path = os.path.join(application_path, 'languages/') 
+340      for language in listdir(path, '^\w+(\-\w+)?\.py$'): 
+341          findT(application_path, language[:-3]) 
+
    342   
+343   
+344  if __name__ == '__main__': 
+345      import doctest 
+346      doctest.testmod() 
+347   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:03 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.languages.lazyT-class.html
Index: applications/examples/static/epydoc/web2py.gluon.languages.lazyT-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.languages.lazyT-class.html
@@ -0,0 +1,667 @@
+
+
+
+
+  web2py.gluon.languages.lazyT
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module languages ::
+        Class lazyT
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class lazyT
    source code

    
+
    +object --+
+         |
+        lazyT
+
    
+
+
    
+never to be called explicitly, returned by translator.__call__

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        message,
+        symbols={},
+        T=1)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __repr__(self)
    
+      repr(x)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __str__(self)
    
+      str(x)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __eq__(self,
+        other)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __ne__(self,
+        other)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __add__(self,
+        other)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __radd__(self,
+        other)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __cmp__(self,
+        other)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __hash__(self)
    
+      hash(x)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getattr__(self,
+        name)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getitem__(self,
+        i)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getslice__(self,
+        i,
+        j)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __iter__(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __len__(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    xml(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    encode(self,
+        *a,
+        **b)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    decode(self,
+        *a,
+        **b)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    read(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __mod__(self,
+        symbols)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        m = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        s = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        T = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        message,
+        symbols={},
+        T=1)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __repr__(self)
+    
    (Representation operator)
+  
    
+      		source code 
+    
    
+  
+  repr(x)
+  
    
+    
    Overrides:
+      object.__repr__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __str__(self)
+    
    (Informal representation operator)
+  
    
+      		source code 
+    
    
+  
+  str(x)
+  
    
+    
    Overrides:
+      object.__str__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __hash__(self)
+    
    (Hashing function)
+  
    
+      		source code 
+    
    
+  
+  hash(x)
+  
    
+    
    Overrides:
+      object.__hash__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.languages.translator-class.html
Index: applications/examples/static/epydoc/web2py.gluon.languages.translator-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.languages.translator-class.html
@@ -0,0 +1,376 @@
+
+
+
+
+  web2py.gluon.languages.translator
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module languages ::
+        Class translator
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class translator
    source code

    
+
    +object --+
+         |
+        translator
+
    
+
+
    
+
    this class is instantiated by gluon.compileapp.build_environment as 
+  the T object
    
+  :
+
    +   T.force(None) # turns off translation
+   T.force('fr, it') # forces web2py to translate using fr.py or it.py
+
+   T("Hello World") # translates "Hello World" using the selected file
+
    
+  
    notice 1: there is no need to force since, by default, T uses 
+  accept_language to determine a translation file.
    
+  notice 2: en and en-en are considered different languages!

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        request)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    get_possible_languages(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    set_current_languages(self,
+        *languages)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    force(self,
+        *languages)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        message,
+        symbols={},
+        language=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    translate(self,
+        message,
+        symbols)
    
+      user ## to add a comment into a translation string the comment can
+      be useful do discriminate different possible translations for the 
+      same string (for example different locations)    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        request)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    translate(self,
+        message,
+        symbols)
+  
    
+      		source code 
+    
    
+  
+  
    user ## to add a comment into a translation string the comment can be 
+  useful do discriminate different possible translations for the same 
+  string (for example different locations)
    
+  
    T(' hello world ') -> ' hello world ' T(' hello world ## token') 
+  -> 'hello world' T('hello ## world ## token') -> 'hello ## 
+  world'
    
+  the ## notation is ignored in multiline strings and strings that start
+  with ##. this is to allow markmin syntax to be translated
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.main-module.html
Index: applications/examples/static/epydoc/web2py.gluon.main-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.main-module.html
@@ -0,0 +1,671 @@
+
+
+
+
+  web2py.gluon.main
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module main
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module main
    source code

    
+
    +
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+Contains:
+
+- wsgibase: the gluon wsgi application
+
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        HttpServer
    
+      the web2py web server (Rocket)
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    get_client(env)
    
+      guess the client address from the environment variables    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    copystream_progress(request,
+        chunk_size=100000)
    
+      copies request.env.wsgi_input into request.body and stores 
+      progress upload status in cache.ram X-Progress-ID:length and 
+      X-Progress-ID:uploaded    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    serve_controller(request,
+        response,
+        session)
    
+      this function is used to generate a dynamic page.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    start_response_aux(status,
+        headers,
+        exc_info,
+        response=1)
    
+      in controller you can use::...    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    middleware_aux(request,
+        response,
+        *middleware_apps)
    
+      In you controller use:    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    environ_aux(environ,
+        request)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    parse_get_post_vars(request,
+        environ)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    wsgibase(environ,
+        responder)
    
+      this is the gluon wsgi application.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    save_password(password,
+        port)
    
+      used by main() to save the password in the parameters_port.py 
+      file.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    appfactory(wsgiapp=<function wsgibase at 0x13d0410>,
+        logfilename='httpserver.log',
+        profilerfilename='profiler.log')
    
+      generates a wsgi application that does logging and profiling and calls
+wsgibase
+
+..    		
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        web2py_path = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        logpath = '/home/mdipierro/web2py/logging.conf'
+    
    
+       
+    
+        logger = logging.getLogger("web2py")
+    
    
+       
+    
+        requests = 0
+    
    
+       
+    
+        regex_client = re.compile(r'[\w-:]+(\.[\w-]+)*\.?')
+    
    
+       
+    
+        version_info = <closed file '/home/mdipierro/web2py/VERSION', ...
+    
    
+       
+    
+        web2py_version = 'Version 1.98.2 (2011-08-03 18:44:38)\n'
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Function Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    get_client(env)
+  
    
+      		source code 
+    
    
+  
+  
    guess the client address from the environment variables
    
+  first tries 'http_x_forwarded_for', secondly 'remote_addr' if all 
+  fails assume '127.0.0.1' (running locally)
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    serve_controller(request,
+        response,
+        session)
+  
    
+      		source code 
+    
    
+  
+  this function is used to generate a dynamic page. It first runs all 
+  models, then runs the function in the controller, and then tries to 
+  render the output using a view/template. this function must run from the 
+  [application] folder. A typical example would be the call to the url 
+  /[application]/[controller]/[function] that would result in a call to 
+  [function]() in applications/[application]/[controller].py rendered by 
+  applications/[application]/views/[controller]/[function].html
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    start_response_aux(status,
+        headers,
+        exc_info,
+        response=1)
+  
    
+      		source code 
+    
    
+  
+  
    +
+in controller you can use::
+
+- request.wsgi.environ
+- request.wsgi.start_response
+
+to call third party WSGI applications
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    middleware_aux(request,
+        response,
+        *middleware_apps)
+  
    
+      		source code 
+    
    
+  
+  In you controller use:
+
    +   @request.wsgi.middleware(middleware1, middleware2, ...)
+
    
+  to decorate actions with WSGI middleware. actions must return strings.
+  uses a simulated environment so it may have weird behavior in some 
+  cases
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    wsgibase(environ,
+        responder)
+  
    
+      		source code 
+    
    
+  
+  
    +
+this is the gluon wsgi application. the first function called when a page
+is requested (static or dynamic). it can be called by paste.httpserver
+or by apache mod_wsgi.
+
+  - fills request with info
+  - the environment variables, replacing '.' with '_'
+  - adds web2py path and version info
+  - compensates for fcgi missing path_info and query_string
+  - validates the path in url
+
+The url path must be either:
+
+1. for static pages:
+
+  - /<application>/static/<file>
+
+2. for dynamic pages:
+
+  - /<application>[/<controller>[/<function>[/<sub>]]][.<extension>]
+  - (sub may go several levels deep, currently 3 levels are supported:
+     sub1/sub2/sub3)
+
+The naming conventions are:
+
+  - application, controller, function and extension may only contain
+    [a-zA-Z0-9_]
+  - file and sub may also contain '-', '=', '.' and '/'
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    appfactory(wsgiapp=<function wsgibase at 0x13d0410>,
+        logfilename='httpserver.log',
+        profilerfilename='profiler.log')
+  
    
+      		source code 
+    
    
+  
+  
    +
+generates a wsgi application that does logging and profiling and calls
+wsgibase
+
+.. function:: gluon.main.appfactory(
+        [wsgiapp=wsgibase
+        [, logfilename='httpserver.log'
+        [, profilerfilename='profiler.log']]])
+
+
    
+  
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Variables Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    version_info
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +open(abspath('VERSION', gluon= True), 'r')
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.main-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.main-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.main-pysrc.html
@@ -0,0 +1,1236 @@
+
+
+
+
+  web2py.gluon.main
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module main
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.main
    
+
    +  1  #!/bin/env python 
+  2  # -*- coding: utf-8 -*- 
+  3   
+  4  """ 
+  5  This file is part of the web2py Web Framework 
+  6  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+  7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+  8   
+  9  Contains: 
+ 10   
+ 11  - wsgibase: the gluon wsgi application 
+ 12   
+ 13  """ 
+ 14   
+ 15  import gc 
+ 16  import cgi 
+ 17  import cStringIO 
+ 18  import Cookie 
+ 19  import os 
+ 20  import re 
+ 21  import copy 
+ 22  import sys 
+ 23  import time 
+ 24  import thread 
+ 25  import datetime 
+ 26  import signal 
+ 27  import socket 
+ 28  import tempfile 
+ 29  import random 
+ 30  import string 
+ 31  import platform 
+ 32  from fileutils import abspath, write_file 
+ 33  from settings import global_settings 
+ 34  from admin import add_path_first, create_missing_folders, create_missing_app_folders 
+ 35  from globals import current 
+ 36   
+ 37  from custom_import import custom_import_install 
+ 38  from contrib.simplejson import dumps 
+ 39   
+ 40  #  Remarks: 
+ 41  #  calling script has inserted path to script directory into sys.path 
+ 42  #  applications_parent (path to applications/, site-packages/ etc) 
+ 43  #  defaults to that directory set sys.path to 
+ 44  #  ("", gluon_parent/site-packages, gluon_parent, ...) 
+ 45  # 
+ 46  #  this is wrong: 
+ 47  #  web2py_path = os.path.dirname(os.path.dirname(os.path.abspath(__file__))) 
+ 48  #  because we do not want the path to this file which may be Library.zip 
+ 49  #  gluon_parent is the directory containing gluon, web2py.py, logging.conf 
+ 50  #  and the handlers. 
+ 51  #  applications_parent (web2py_path) is the directory containing applications/ 
+ 52  #  and routes.py 
+ 53  #  The two are identical unless web2py_path is changed via the web2py.py -f folder option 
+ 54  #  main.web2py_path is the same as applications_parent (for backward compatibility) 
+ 55   
+ 56  if not hasattr(os, 'mkdir'): 
+ 57      global_settings.db_sessions = True 
+ 58  if global_settings.db_sessions is not True: 
+ 59      global_settings.db_sessions = set() 
+ 60  global_settings.gluon_parent = os.environ.get('web2py_path', os.getcwd()) 
+ 61  global_settings.applications_parent = global_settings.gluon_parent 
+ 62  web2py_path = global_settings.applications_parent # backward compatibility 
+ 63  global_settings.app_folders = set() 
+ 64  global_settings.debugging = False 
+ 65   
+ 66  custom_import_install(web2py_path) 
+ 67   
+ 68  create_missing_folders() 
+ 69   
+ 70  # set up logging for subsequent imports 
+ 71  import logging 
+ 72  import logging.config 
+ 73  logpath = abspath("logging.conf") 
+ 74  if os.path.exists(logpath): 
+ 75      logging.config.fileConfig(abspath("logging.conf")) 
+ 76  else: 
+ 77      logging.basicConfig() 
+ 78  logger = logging.getLogger("web2py") 
+ 79   
+ 80  from restricted import RestrictedError 
+ 81  from http import HTTP, redirect 
+ 82  from globals import Request, Response, Session 
+ 83  from compileapp import build_environment, run_models_in, \ 
+ 84      run_controller_in, run_view_in 
+ 85  from fileutils import copystream 
+ 86  from contenttype import contenttype 
+ 87  from dal import BaseAdapter 
+ 88  from settings import global_settings 
+ 89  from validators import CRYPT 
+ 90  from cache import Cache 
+ 91  from html import URL as Url 
+ 92  import newcron 
+ 93  import rewrite 
+ 94   
+ 95  __all__ = ['wsgibase', 'save_password', 'appfactory', 'HttpServer'] 
+ 96   
+ 97  requests = 0    # gc timer 
+ 98   
+ 99  # Security Checks: validate URL and session_id here, 
+100  # accept_language is validated in languages 
+101   
+102  # pattern used to validate client address 
+103  regex_client = re.compile('[\w\-:]+(\.[\w\-]+)*\.?')  # ## to account for IPV6 
+104   
+105  version_info = open(abspath('VERSION', gluon=True), 'r') 
+106  web2py_version = version_info.read() 
+107  version_info.close() 
+108   
+109  try: 
+110      import rocket 
+111  except: 
+112      if not global_settings.web2py_runtime_gae: 
+113          logger.warn('unable to import Rocket') 
+114   
+115  rewrite.load() 
+116   
+
    117 -def get_client(env): 
+
    118      """ 
+119      guess the client address from the environment variables 
+120   
+121      first tries 'http_x_forwarded_for', secondly 'remote_addr' 
+122      if all fails assume '127.0.0.1' (running locally) 
+123      """ 
+124      g = regex_client.search(env.get('http_x_forwarded_for', '')) 
+125      if g: 
+126          return g.group() 
+127      g = regex_client.search(env.get('remote_addr', '')) 
+128      if g: 
+129          return g.group() 
+130      return '127.0.0.1' 
+
    131   
+
    132 -def copystream_progress(request, chunk_size= 10**5): 
+
    133      """ 
+134      copies request.env.wsgi_input into request.body 
+135      and stores progress upload status in cache.ram 
+136      X-Progress-ID:length and X-Progress-ID:uploaded 
+137      """ 
+138      if not request.env.content_length: 
+139          return cStringIO.StringIO() 
+140      source = request.env.wsgi_input 
+141      size = int(request.env.content_length) 
+142      dest = tempfile.TemporaryFile() 
+143      if not 'X-Progress-ID' in request.vars: 
+144          copystream(source, dest, size, chunk_size) 
+145          return dest 
+146      cache_key = 'X-Progress-ID:'+request.vars['X-Progress-ID'] 
+147      cache = Cache(request) 
+148      cache.ram(cache_key+':length', lambda: size, 0) 
+149      cache.ram(cache_key+':uploaded', lambda: 0, 0) 
+150      while size > 0: 
+151          if size < chunk_size: 
+152              data = source.read(size) 
+153              cache.ram.increment(cache_key+':uploaded', size) 
+154          else: 
+155              data = source.read(chunk_size) 
+156              cache.ram.increment(cache_key+':uploaded', chunk_size) 
+157          length = len(data) 
+158          if length > size: 
+159              (data, length) = (data[:size], size) 
+160          size -= length 
+161          if length == 0: 
+162              break 
+163          dest.write(data) 
+164          if length < chunk_size: 
+165              break 
+166      dest.seek(0) 
+167      cache.ram(cache_key+':length', None) 
+168      cache.ram(cache_key+':uploaded', None) 
+169      return dest 
+
    170   
+171   
+
    172 -def serve_controller(request, response, session): 
+
    173      """ 
+174      this function is used to generate a dynamic page. 
+175      It first runs all models, then runs the function in the controller, 
+176      and then tries to render the output using a view/template. 
+177      this function must run from the [application] folder. 
+178      A typical example would be the call to the url 
+179      /[application]/[controller]/[function] that would result in a call 
+180      to [function]() in applications/[application]/[controller].py 
+181      rendered by applications/[application]/views/[controller]/[function].html 
+182      """ 
+183   
+184      # ################################################## 
+185      # build environment for controller and view 
+186      # ################################################## 
+187   
+188      environment = build_environment(request, response, session) 
+189   
+190      # set default view, controller can override it 
+191   
+192      response.view = '%s/%s.%s' % (request.controller, 
+193                                    request.function, 
+194                                    request.extension) 
+195   
+196      # also, make sure the flash is passed through 
+197      # ################################################## 
+198      # process models, controller and view (if required) 
+199      # ################################################## 
+200   
+201      run_models_in(environment) 
+202      response._view_environment = copy.copy(environment) 
+203      page = run_controller_in(request.controller, request.function, environment) 
+204      if isinstance(page, dict): 
+205          response._vars = page 
+206          for key in page: 
+207              response._view_environment[key] = page[key] 
+208          run_view_in(response._view_environment) 
+209          page = response.body.getvalue() 
+210      # logic to garbage collect after exec, not always, once every 100 requests 
+211      global requests 
+212      requests = ('requests' in globals()) and (requests+1) % 100 or 0 
+213      if not requests: gc.collect() 
+214      # end garbage collection logic 
+215      raise HTTP(response.status, page, **response.headers) 
+
    216   
+217   
+
    218 -def start_response_aux(status, headers, exc_info, response=None): 
+
    219      """ 
+220      in controller you can use:: 
+221   
+222      - request.wsgi.environ 
+223      - request.wsgi.start_response 
+224   
+225      to call third party WSGI applications 
+226      """ 
+227      response.status = str(status).split(' ',1)[0] 
+228      response.headers = dict(headers) 
+229      return lambda *args, **kargs: response.write(escape=False,*args,**kargs) 
+
    230   
+231   
+
    232 -def middleware_aux(request, response, *middleware_apps): 
+
    233      """ 
+234      In you controller use:: 
+235   
+236          @request.wsgi.middleware(middleware1, middleware2, ...) 
+237   
+238      to decorate actions with WSGI middleware. actions must return strings. 
+239      uses a simulated environment so it may have weird behavior in some cases 
+240      """ 
+241      def middleware(f): 
+242          def app(environ, start_response): 
+243              data = f() 
+244              start_response(response.status,response.headers.items()) 
+245              if isinstance(data,list): 
+246                  return data 
+247              return [data] 
+
    248          for item in middleware_apps: 
+249              app=item(app) 
+250          def caller(app): 
+251              return app(request.wsgi.environ,request.wsgi.start_response) 
+252          return lambda caller=caller, app=app: caller(app) 
+253      return middleware 
+254   
+
    255 -def environ_aux(environ,request): 
+
    256      new_environ = copy.copy(environ) 
+257      new_environ['wsgi.input'] = request.body 
+258      new_environ['wsgi.version'] = 1 
+259      return new_environ 
+
    260   
+
    261 -def parse_get_post_vars(request, environ): 
+
    262   
+263      # always parse variables in URL for GET, POST, PUT, DELETE, etc. in get_vars 
+264      dget = cgi.parse_qsl(request.env.query_string or '', keep_blank_values=1) 
+265      for (key, value) in dget: 
+266          if key in request.get_vars: 
+267              if isinstance(request.get_vars[key], list): 
+268                  request.get_vars[key] += [value] 
+269              else: 
+270                  request.get_vars[key] = [request.get_vars[key]] + [value] 
+271          else: 
+272              request.get_vars[key] = value 
+273          request.vars[key] = request.get_vars[key] 
+274   
+275      # parse POST variables on POST, PUT, BOTH only in post_vars 
+276      request.body = copystream_progress(request) ### stores request body 
+277      if (request.body and request.env.request_method in ('POST', 'PUT', 'BOTH')): 
+278          dpost = cgi.FieldStorage(fp=request.body,environ=environ,keep_blank_values=1) 
+279          # The same detection used by FieldStorage to detect multipart POSTs 
+280          is_multipart = dpost.type[:10] == 'multipart/' 
+281          request.body.seek(0) 
+282          isle25 = sys.version_info[1] <= 5 
+283   
+284          def listify(a): 
+285              return (not isinstance(a,list) and [a]) or a 
+
    286          try: 
+287              keys = sorted(dpost) 
+288          except TypeError: 
+289              keys = [] 
+290          for key in keys: 
+291              dpk = dpost[key] 
+292              # if en element is not a file replace it with its value else leave it alone 
+293              if isinstance(dpk, list): 
+294                  if not dpk[0].filename: 
+295                      value = [x.value for x in dpk] 
+296                  else: 
+297                      value = [x for x in dpk] 
+298              elif not dpk.filename: 
+299                  value = dpk.value 
+300              else: 
+301                  value = dpk 
+302              pvalue = listify(value) 
+303              if key in request.vars: 
+304                  gvalue = listify(request.vars[key]) 
+305                  if isle25: 
+306                      value = pvalue + gvalue 
+307                  elif is_multipart: 
+308                      pvalue = pvalue[len(gvalue):] 
+309                  else: 
+310                      pvalue = pvalue[:-len(gvalue)] 
+311              request.vars[key] = value 
+312              if len(pvalue): 
+313                  request.post_vars[key] = (len(pvalue)>1 and pvalue) or pvalue[0] 
+314   
+315   
+
    316 -def wsgibase(environ, responder): 
+
    317      """ 
+318      this is the gluon wsgi application. the first function called when a page 
+319      is requested (static or dynamic). it can be called by paste.httpserver 
+320      or by apache mod_wsgi. 
+321   
+322        - fills request with info 
+323        - the environment variables, replacing '.' with '_' 
+324        - adds web2py path and version info 
+325        - compensates for fcgi missing path_info and query_string 
+326        - validates the path in url 
+327   
+328      The url path must be either: 
+329   
+330      1. for static pages: 
+331   
+332        - /<application>/static/<file> 
+333   
+334      2. for dynamic pages: 
+335   
+336        - /<application>[/<controller>[/<function>[/<sub>]]][.<extension>] 
+337        - (sub may go several levels deep, currently 3 levels are supported: 
+338           sub1/sub2/sub3) 
+339   
+340      The naming conventions are: 
+341   
+342        - application, controller, function and extension may only contain 
+343          [a-zA-Z0-9_] 
+344        - file and sub may also contain '-', '=', '.' and '/' 
+345      """ 
+346   
+347      current.__dict__.clear() 
+348      request = Request() 
+349      response = Response() 
+350      session = Session() 
+351      request.env.web2py_path = global_settings.applications_parent 
+352      request.env.web2py_version = web2py_version 
+353      request.env.update(global_settings) 
+354      static_file = False 
+355      try: 
+356          try: 
+357              try: 
+358                  # ################################################## 
+359                  # handle fcgi missing path_info and query_string 
+360                  # select rewrite parameters 
+361                  # rewrite incoming URL 
+362                  # parse rewritten header variables 
+363                  # parse rewritten URL 
+364                  # serve file if static 
+365                  # ################################################## 
+366   
+367                  if not environ.get('PATH_INFO',None) and \ 
+368                          environ.get('REQUEST_URI',None): 
+369                      # for fcgi, get path_info and query_string from request_uri 
+370                      items = environ['REQUEST_URI'].split('?') 
+371                      environ['PATH_INFO'] = items[0] 
+372                      if len(items) > 1: 
+373                          environ['QUERY_STRING'] = items[1] 
+374                      else: 
+375                          environ['QUERY_STRING'] = '' 
+376                  if not environ.get('HTTP_HOST',None): 
+377                      environ['HTTP_HOST'] = '%s:%s' % (environ.get('SERVER_NAME'), 
+378                                                        environ.get('SERVER_PORT')) 
+379   
+380                  (static_file, environ) = rewrite.url_in(request, environ) 
+381                  if static_file: 
+382                      if request.env.get('query_string', '')[:10] == 'attachment': 
+383                          response.headers['Content-Disposition'] = 'attachment' 
+384                      response.stream(static_file, request=request) 
+385   
+386                  # ################################################## 
+387                  # fill in request items 
+388                  # ################################################## 
+389   
+390                  http_host = request.env.http_host.split(':',1)[0] 
+391   
+392                  local_hosts = [http_host,'::1','127.0.0.1','::ffff:127.0.0.1'] 
+393                  if not global_settings.web2py_runtime_gae: 
+394                      local_hosts += [socket.gethostname(), 
+395                                      socket.gethostbyname(http_host)] 
+396                  request.client = get_client(request.env) 
+397                  request.folder = abspath('applications', 
+398                                           request.application) + os.sep 
+399                  x_req_with = str(request.env.http_x_requested_with).lower() 
+400                  request.ajax = x_req_with == 'xmlhttprequest' 
+401                  request.cid = request.env.http_web2py_component_element 
+402                  request.is_local = request.env.remote_addr in local_hosts 
+403                  request.is_https = request.env.wsgi_url_scheme \ 
+404                      in ['https', 'HTTPS'] or request.env.https == 'on' 
+405   
+406                  # ################################################## 
+407                  # compute a request.uuid to be used for tickets and toolbar 
+408                  # ################################################## 
+409   
+410                  response.uuid = request.compute_uuid() 
+411   
+412                  # ################################################## 
+413                  # access the requested application 
+414                  # ################################################## 
+415   
+416                  if not os.path.exists(request.folder): 
+417                      if request.application == rewrite.thread.routes.default_application and request.application != 'welcome': 
+418                          request.application = 'welcome' 
+419                          redirect(Url(r=request)) 
+420                      elif rewrite.thread.routes.error_handler: 
+421                          redirect(Url(rewrite.thread.routes.error_handler['application'], 
+422                                       rewrite.thread.routes.error_handler['controller'], 
+423                                       rewrite.thread.routes.error_handler['function'], 
+424                                       args=request.application)) 
+425                      else: 
+426                          raise HTTP(404, 
+427                                     rewrite.thread.routes.error_message % 'invalid request', 
+428                                     web2py_error='invalid application') 
+429                  request.url = Url(r=request, args=request.args, 
+430                                         extension=request.raw_extension) 
+431   
+432                  # ################################################## 
+433                  # build missing folders 
+434                  # ################################################## 
+435   
+436                  create_missing_app_folders(request) 
+437   
+438                  # ################################################## 
+439                  # get the GET and POST data 
+440                  # ################################################## 
+441   
+442                  parse_get_post_vars(request, environ) 
+443   
+444                  # ################################################## 
+445                  # expose wsgi hooks for convenience 
+446                  # ################################################## 
+447   
+448                  request.wsgi.environ = environ_aux(environ,request) 
+449                  request.wsgi.start_response = lambda status='200', headers=[], \ 
+450                      exec_info=None, response=response: \ 
+451                      start_response_aux(status, headers, exec_info, response) 
+452                  request.wsgi.middleware = lambda *a: middleware_aux(request,response,*a) 
+453   
+454                  # ################################################## 
+455                  # load cookies 
+456                  # ################################################## 
+457   
+458                  if request.env.http_cookie: 
+459                      try: 
+460                          request.cookies.load(request.env.http_cookie) 
+461                      except Cookie.CookieError, e: 
+462                          pass # invalid cookies 
+463   
+464                  # ################################################## 
+465                  # try load session or create new session file 
+466                  # ################################################## 
+467   
+468                  session.connect(request, response) 
+469   
+470                  # ################################################## 
+471                  # set no-cache headers 
+472                  # ################################################## 
+473   
+474                  response.headers['Content-Type'] = contenttype('.'+request.extension) 
+475                  response.headers['Cache-Control'] = \ 
+476                      'no-store, no-cache, must-revalidate, post-check=0, pre-check=0' 
+477                  response.headers['Expires'] = \ 
+478                      time.strftime('%a, %d %b %Y %H:%M:%S GMT', time.gmtime()) 
+479                  response.headers['Pragma'] = 'no-cache' 
+480   
+481                  # ################################################## 
+482                  # run controller 
+483                  # ################################################## 
+484   
+485                  serve_controller(request, response, session) 
+486   
+487              except HTTP, http_response: 
+488                  if static_file: 
+489                      return http_response.to(responder) 
+490   
+491                  if request.body: 
+492                      request.body.close() 
+493   
+494                  # ################################################## 
+495                  # on success, try store session in database 
+496                  # ################################################## 
+497                  session._try_store_in_db(request, response) 
+498   
+499                  # ################################################## 
+500                  # on success, commit database 
+501                  # ################################################## 
+502   
+503                  if response._custom_commit: 
+504                      response._custom_commit() 
+505                  else: 
+506                      BaseAdapter.close_all_instances('commit') 
+507   
+508                  # ################################################## 
+509                  # if session not in db try store session on filesystem 
+510                  # this must be done after trying to commit database! 
+511                  # ################################################## 
+512   
+513                  session._try_store_on_disk(request, response) 
+514   
+515                  # ################################################## 
+516                  # store cookies in headers 
+517                  # ################################################## 
+518   
+519                  if request.cid: 
+520   
+521                      if response.flash and not 'web2py-component-flash' in http_response.headers: 
+522                          http_response.headers['web2py-component-flash'] = \ 
+523                              str(response.flash).replace('\n','') 
+524                      if response.js and not 'web2py-component-command' in http_response.headers: 
+525                          http_response.headers['web2py-component-command'] = \ 
+526                              response.js.replace('\n','') 
+527                  if session._forget and \ 
+528                          response.session_id_name in response.cookies: 
+529                      del response.cookies[response.session_id_name] 
+530                  elif session._secure: 
+531                      response.cookies[response.session_id_name]['secure'] = True 
+532                  if len(response.cookies)>0: 
+533                      http_response.headers['Set-Cookie'] = \ 
+534                          [str(cookie)[11:] for cookie in response.cookies.values()] 
+535                  ticket=None 
+536   
+537              except RestrictedError, e: 
+538   
+539                  if request.body: 
+540                      request.body.close() 
+541   
+542                  # ################################################## 
+543                  # on application error, rollback database 
+544                  # ################################################## 
+545   
+546                  ticket = e.log(request) or 'unknown' 
+547                  if response._custom_rollback: 
+548                      response._custom_rollback() 
+549                  else: 
+550                      BaseAdapter.close_all_instances('rollback') 
+551   
+552                  http_response = \ 
+553                      HTTP(500, 
+554                           rewrite.thread.routes.error_message_ticket % dict(ticket=ticket), 
+555                           web2py_error='ticket %s' % ticket) 
+556   
+557          except: 
+558   
+559              if request.body: 
+560                  request.body.close() 
+561   
+562              # ################################################## 
+563              # on application error, rollback database 
+564              # ################################################## 
+565   
+566              try: 
+567                  if response._custom_rollback: 
+568                      response._custom_rollback() 
+569                  else: 
+570                      BaseAdapter.close_all_instances('rollback') 
+571              except: 
+572                  pass 
+573              e = RestrictedError('Framework', '', '', locals()) 
+574              ticket = e.log(request) or 'unrecoverable' 
+575              http_response = \ 
+576                  HTTP(500, 
+577                       rewrite.thread.routes.error_message_ticket % dict(ticket=ticket), 
+578                       web2py_error='ticket %s' % ticket) 
+579   
+580      finally: 
+581          if response and hasattr(response, 'session_file') and response.session_file: 
+582              response.session_file.close() 
+583  #         if global_settings.debugging: 
+584  #             import gluon.debug 
+585  #             gluon.debug.stop_trace() 
+586   
+587      session._unlock(response) 
+588      http_response, new_environ = rewrite.try_rewrite_on_error( 
+589          http_response, request, environ, ticket) 
+590      if not http_response: 
+591          return wsgibase(new_environ,responder) 
+592      if global_settings.web2py_crontype == 'soft': 
+593          newcron.softcron(global_settings.applications_parent).start() 
+594      return http_response.to(responder) 
+
    595       
+596   
+
    597 -def save_password(password, port): 
+
    598      """ 
+599      used by main() to save the password in the parameters_port.py file. 
+600      """ 
+601   
+602      password_file = abspath('parameters_%i.py' % port) 
+603      if password == '<random>': 
+604          # make up a new password 
+605          chars = string.letters + string.digits 
+606          password = ''.join([random.choice(chars) for i in range(8)]) 
+607          cpassword = CRYPT()(password)[0] 
+608          print '******************* IMPORTANT!!! ************************' 
+609          print 'your admin password is "%s"' % password 
+610          print '*********************************************************' 
+611      elif password == '<recycle>': 
+612          # reuse the current password if any 
+613          if os.path.exists(password_file): 
+614              return 
+615          else: 
+616              password = '' 
+617      elif password.startswith('<pam_user:'): 
+618          # use the pam password for specified user 
+619          cpassword = password[1:-1] 
+620      else: 
+621          # use provided password 
+622          cpassword = CRYPT()(password)[0] 
+623      fp = open(password_file, 'w') 
+624      if password: 
+625          fp.write('password="%s"\n' % cpassword) 
+626      else: 
+627          fp.write('password=None\n') 
+628      fp.close() 
+
    629   
+630   
+
    631 -def appfactory(wsgiapp=wsgibase, 
+632                 logfilename='httpserver.log', 
+633                 profilerfilename='profiler.log'): 
+
    634      """ 
+635      generates a wsgi application that does logging and profiling and calls 
+636      wsgibase 
+637   
+638      .. function:: gluon.main.appfactory( 
+639              [wsgiapp=wsgibase 
+640              [, logfilename='httpserver.log' 
+641              [, profilerfilename='profiler.log']]]) 
+642   
+643      """ 
+644      if profilerfilename and os.path.exists(profilerfilename): 
+645          os.unlink(profilerfilename) 
+646      locker = thread.allocate_lock() 
+647   
+648      def app_with_logging(environ, responder): 
+649          """ 
+650          a wsgi app that does logging and profiling and calls wsgibase 
+651          """ 
+652          status_headers = [] 
+653   
+654          def responder2(s, h): 
+655              """ 
+656              wsgi responder app 
+657              """ 
+658              status_headers.append(s) 
+659              status_headers.append(h) 
+660              return responder(s, h) 
+
    661   
+662          time_in = time.time() 
+663          ret = [0] 
+664          if not profilerfilename: 
+665              ret[0] = wsgiapp(environ, responder2) 
+666          else: 
+667              import cProfile 
+668              import pstats 
+669              logger.warn('profiler is on. this makes web2py slower and serial') 
+670   
+671              locker.acquire() 
+672              cProfile.runctx('ret[0] = wsgiapp(environ, responder2)', 
+673                              globals(), locals(), profilerfilename+'.tmp') 
+674              stat = pstats.Stats(profilerfilename+'.tmp') 
+675              stat.stream = cStringIO.StringIO() 
+676              stat.strip_dirs().sort_stats("time").print_stats(80) 
+677              profile_out = stat.stream.getvalue() 
+678              profile_file = open(profilerfilename, 'a') 
+679              profile_file.write('%s\n%s\n%s\n%s\n\n' % \ 
+680                 ('='*60, environ['PATH_INFO'], '='*60, profile_out)) 
+681              profile_file.close() 
+682              locker.release() 
+683          try: 
+684              line = '%s, %s, %s, %s, %s, %s, %f\n' % ( 
+685                  environ['REMOTE_ADDR'], 
+686                  datetime.datetime.today().strftime('%Y-%m-%d %H:%M:%S'), 
+687                  environ['REQUEST_METHOD'], 
+688                  environ['PATH_INFO'].replace(',', '%2C'), 
+689                  environ['SERVER_PROTOCOL'], 
+690                  (status_headers[0])[:3], 
+691                  time.time() - time_in, 
+692                  ) 
+693              if not logfilename: 
+694                  sys.stdout.write(line) 
+695              elif isinstance(logfilename, str): 
+696                  write_file(logfilename, line, 'a') 
+697              else: 
+698                  logfilename.write(line) 
+699          except: 
+700              pass 
+701          return ret[0] 
+702   
+703      return app_with_logging 
+704   
+705   
+
    706 -class HttpServer(object): 
+
    707      """ 
+708      the web2py web server (Rocket) 
+709      """ 
+710   
+
    711 -    def __init__( 
+712          self, 
+713          ip='127.0.0.1', 
+714          port=8000, 
+715          password='', 
+716          pid_filename='httpserver.pid', 
+717          log_filename='httpserver.log', 
+718          profiler_filename=None, 
+719          ssl_certificate=None, 
+720          ssl_private_key=None, 
+721          min_threads=None, 
+722          max_threads=None, 
+723          server_name=None, 
+724          request_queue_size=5, 
+725          timeout=10, 
+726          shutdown_timeout=None, # Rocket does not use a shutdown timeout 
+727          path=None, 
+728          interfaces=None # Rocket is able to use several interfaces - must be list of socket-tuples as string 
+729          ): 
+
    730          """ 
+731          starts the web server. 
+732          """ 
+733   
+734          if interfaces: 
+735              # if interfaces is specified, it must be tested for rocket parameter correctness 
+736              # not necessarily completely tested (e.g. content of tuples or ip-format) 
+737              import types 
+738              if isinstance(interfaces,types.ListType): 
+739                  for i in interfaces: 
+740                      if not isinstance(i,types.TupleType): 
+741                          raise "Wrong format for rocket interfaces parameter - see http://packages.python.org/rocket/" 
+742              else: 
+743                  raise "Wrong format for rocket interfaces parameter - see http://packages.python.org/rocket/" 
+744   
+745          if path: 
+746              # if a path is specified change the global variables so that web2py 
+747              # runs from there instead of cwd or os.environ['web2py_path'] 
+748              global web2py_path 
+749              path = os.path.normpath(path) 
+750              web2py_path = path 
+751              global_settings.applications_parent = path 
+752              os.chdir(path) 
+753              [add_path_first(p) for p in (path, abspath('site-packages'), "")] 
+754   
+755          save_password(password, port) 
+756          self.pid_filename = pid_filename 
+757          if not server_name: 
+758              server_name = socket.gethostname() 
+759          logger.info('starting web server...') 
+760          rocket.SERVER_NAME = server_name 
+761          sock_list = [ip, port] 
+762          if not ssl_certificate or not ssl_private_key: 
+763              logger.info('SSL is off') 
+764          elif not rocket.ssl: 
+765              logger.warning('Python "ssl" module unavailable. SSL is OFF') 
+766          elif not os.path.exists(ssl_certificate): 
+767              logger.warning('unable to open SSL certificate. SSL is OFF') 
+768          elif not os.path.exists(ssl_private_key): 
+769              logger.warning('unable to open SSL private key. SSL is OFF') 
+770          else: 
+771              sock_list.extend([ssl_private_key, ssl_certificate]) 
+772              logger.info('SSL is ON') 
+773          app_info = {'wsgi_app': appfactory(wsgibase, 
+774                                             log_filename, 
+775                                             profiler_filename) } 
+776   
+777          self.server = rocket.Rocket(interfaces or tuple(sock_list), 
+778                                      method='wsgi', 
+779                                      app_info=app_info, 
+780                                      min_threads=min_threads, 
+781                                      max_threads=max_threads, 
+782                                      queue_size=int(request_queue_size), 
+783                                      timeout=int(timeout), 
+784                                      handle_signals=False, 
+785                                      ) 
+
    786   
+787   
+
    788 -    def start(self): 
+
    789          """ 
+790          start the web server 
+791          """ 
+792          try: 
+793              signal.signal(signal.SIGTERM, lambda a, b, s=self: s.stop()) 
+794              signal.signal(signal.SIGINT, lambda a, b, s=self: s.stop()) 
+795          except: 
+796              pass 
+797          write_file(self.pid_filename, str(os.getpid())) 
+798          self.server.start() 
+
    799   
+
    800 -    def stop(self, stoplogging=False): 
+
    801          """ 
+802          stop cron and the web server 
+803          """ 
+804          newcron.stopcron() 
+805          self.server.stop(stoplogging) 
+806          try: 
+807              os.unlink(self.pid_filename) 
+808          except: 
+809              pass 
+
    810   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:09 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.main.HttpServer-class.html
Index: applications/examples/static/epydoc/web2py.gluon.main.HttpServer-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.main.HttpServer-class.html
@@ -0,0 +1,309 @@
+
+
+
+
+  web2py.gluon.main.HttpServer
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module main ::
+        Class HttpServer
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class HttpServer
    source code

    
+
    +object --+
+         |
+        HttpServer
+
    
+
+
    
+the web2py web server (Rocket)

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        ip='127.0.0.1',
+        port=8000,
+        password='',
+        pid_filename='httpserver.pid',
+        log_filename='httpserver.log',
+        profiler_filename=1,
+        ssl_certificate=1,
+        ssl_private_key=1,
+        min_threads=1,
+        max_threads=1,
+        server_name=1,
+        request_queue_size=5,
+        timeout=10,
+        shutdown_timeout=1,
+        path=1,
+        interfaces=1)
    
+      starts the web server.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    start(self)
    
+      start the web server    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    stop(self,
+        stoplogging=True)
    
+      stop cron and the web server    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        ip='127.0.0.1',
+        port=8000,
+        password='',
+        pid_filename='httpserver.pid',
+        log_filename='httpserver.log',
+        profiler_filename=1,
+        ssl_certificate=1,
+        ssl_private_key=1,
+        min_threads=1,
+        max_threads=1,
+        server_name=1,
+        request_queue_size=5,
+        timeout=10,
+        shutdown_timeout=1,
+        path=1,
+        interfaces=1)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  starts the web server.
+  
    
+    
    Overrides:
+      object.__init__
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.myregex-module.html
Index: applications/examples/static/epydoc/web2py.gluon.myregex-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.myregex-module.html
@@ -0,0 +1,262 @@
+
+
+
+
+  web2py.gluon.myregex
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module myregex
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module myregex
    source code

    
+This file is part of the web2py Web Framework Copyrighted by Massimo 
+  Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        regex_tables = re.compile(r'(?m)^\w+\.define_table\(\s*[\'"](?...
+    
    
+       
+    
+        regex_expose = re.compile(r'(?m)^def\s+(?P<name>(?:[a-zA-Z0-9]...
+    
    
+       
+    
+        regex_include = re.compile(r'(?P<all>\{\{\s*include\s+[\'"](?P...
+    
    
+       
+    
+        regex_extend = re.compile(r'(?m)^\s*(?P<all>\{\{\s*extend\s+[\...
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Variables Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    regex_tables
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +re.compile(r'(?m)^\w+\.define_table\(\s*[\'"](?P<name>[\w_]+)[\'"]')
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    regex_expose
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +re.compile(r'(?m)^def\s+(?P<name>(?:[a-zA-Z0-9]\w*)|(?:_[a-zA-Z0-9]\w*\
+))\(\)\s*:')
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    regex_include
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +re.compile(r'(?P<all>\{\{\s*include\s+[\'"](?P<name>[^\'"]*)[\'"]\s*\}\
+\})')
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    regex_extend
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +re.compile(r'(?m)^\s*(?P<all>\{\{\s*extend\s+[\'"](?P<name>[^\'"]+)[\'\
+"]\s*\}\})')
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.myregex-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.myregex-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.myregex-pysrc.html
@@ -0,0 +1,150 @@
+
+
+
+
+  web2py.gluon.myregex
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module myregex
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.myregex
    
+
    + 1  #!/usr/bin/env python 
+ 2  # -*- coding: utf-8 -*- 
+ 3   
+ 4  """ 
+ 5  This file is part of the web2py Web Framework 
+ 6  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+ 7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+ 8  """ 
+ 9   
+10  import re 
+11   
+12  # pattern to find defined tables 
+13   
+14  regex_tables = re.compile(\ 
+15      """^[\w]+\.define_table\(\s*[\'\"](?P<name>[\w_]+)[\'\"]""", 
+16      flags=re.M) 
+17   
+18  # pattern to find exposed functions in controller 
+19   
+20  regex_expose = re.compile(\ 
+21      '^def\s+(?P<name>(?:[a-zA-Z0-9]\w*)|(?:_[a-zA-Z0-9]\w*))\(\)\s*:', 
+22      flags=re.M) 
+23   
+24  regex_include = re.compile(\ 
+25      '(?P<all>\{\{\s*include\s+[\'"](?P<name>[^\'"]*)[\'"]\s*\}\})') 
+26   
+27  regex_extend = re.compile(\ 
+28      '^\s*(?P<all>\{\{\s*extend\s+[\'"](?P<name>[^\'"]+)[\'"]\s*\}\})',re.MULTILINE) 
+29   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:05 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.newcron-module.html
Index: applications/examples/static/epydoc/web2py.gluon.newcron-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.newcron-module.html
@@ -0,0 +1,289 @@
+
+
+
+
+  web2py.gluon.newcron
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module newcron
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module newcron
    source code

    
+Created by Attila Csipa <web2py@csipa.in.rs> Modified by Massimo
+  Di Pierro <mdipierro@cs.depaul.edu>

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        extcron
+    
    
+       
+    
+        hardcron
+    
    
+       
+    
+        softcron
+    
    
+       
+    
+        Token
+    
    
+       
+    
+        cronlauncher
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    stopcron()
    
+      graceful shutdown of cron    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    rangetolist(s,
+        period='min')
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    parsecronline(line)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    crondance(applications_parent,
+        ctype='soft',
+        startup=True)
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        logger = logging.getLogger("web2py.cron")
+    
    
+       
+    
+        _cron_stopping = True
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.newcron-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.newcron-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.newcron-pysrc.html
@@ -0,0 +1,1204 @@
+
+
+
+
+  web2py.gluon.newcron
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module newcron
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.newcron
    
+
    +  1  #!/usr/bin/env python 
+  2  # -*- coding: utf-8 -*- 
+  3   
+  4  """ 
+  5  Created by Attila Csipa <web2py@csipa.in.rs> 
+  6  Modified by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+  7  """ 
+  8   
+  9  import sys 
+ 10  import os 
+ 11  import threading 
+ 12  import logging 
+ 13  import time 
+ 14  import sched 
+ 15  import re 
+ 16  import datetime 
+ 17  import platform 
+ 18  import portalocker 
+ 19  import fileutils 
+ 20  import cPickle 
+ 21  from settings import global_settings 
+ 22   
+ 23  logger = logging.getLogger("web2py.cron") 
+ 24  _cron_stopping = False 
+ 25   
+
     26 -def stopcron(): 
+
     27      "graceful shutdown of cron" 
+ 28      global _cron_stopping 
+ 29      _cron_stopping = True 
+
     30   
+
     31 -class extcron(threading.Thread): 
+
     32   
+
     33 -    def __init__(self, applications_parent): 
+
     34          threading.Thread.__init__(self) 
+ 35          self.setDaemon(False) 
+ 36          self.path = applications_parent 
+ 37          crondance(self.path, 'external', startup=True) 
+
     38   
+
     39 -    def run(self): 
+
     40          if not _cron_stopping: 
+ 41              logger.debug('external cron invocation') 
+ 42              crondance(self.path, 'external', startup=False) 
+
     43   
+
     44 -class hardcron(threading.Thread): 
+
     45   
+
     46 -    def __init__(self, applications_parent): 
+
     47          threading.Thread.__init__(self) 
+ 48          self.setDaemon(True) 
+ 49          self.path = applications_parent 
+ 50          crondance(self.path, 'hard', startup=True) 
+
     51   
+
     52 -    def launch(self): 
+
     53          if not _cron_stopping: 
+ 54              logger.debug('hard cron invocation') 
+ 55              crondance(self.path, 'hard', startup = False) 
+
     56   
+
     57 -    def run(self): 
+
     58          s = sched.scheduler(time.time, time.sleep) 
+ 59          logger.info('Hard cron daemon started') 
+ 60          while not _cron_stopping: 
+ 61              now = time.time() 
+ 62              s.enter(60 - now % 60, 1, self.launch, ()) 
+ 63              s.run() 
+
     64   
+
     65 -class softcron(threading.Thread): 
+
     66   
+
     67 -    def __init__(self, applications_parent): 
+
     68          threading.Thread.__init__(self) 
+ 69          self.path = applications_parent 
+ 70          crondance(self.path, 'soft', startup=True) 
+
     71   
+
     72 -    def run(self): 
+
     73          if not _cron_stopping: 
+ 74              logger.debug('soft cron invocation') 
+ 75              crondance(self.path, 'soft', startup=False) 
+
     76   
+
     77 -class Token(object): 
+
     78   
+
     79 -    def __init__(self,path): 
+
     80          self.path = os.path.join(path, 'cron.master') 
+ 81          if not os.path.exists(self.path): 
+ 82              fileutils.write_file(self.path, '', 'wb') 
+ 83          self.master = None 
+ 84          self.now = time.time() 
+
     85   
+
     86 -    def acquire(self,startup=False): 
+
     87          """ 
+ 88          returns the time when the lock is acquired or 
+ 89          None if cron already running 
+ 90   
+ 91          lock is implemented by writing a pickle (start, stop) in cron.master 
+ 92          start is time when cron job starts and stop is time when cron completed 
+ 93          stop == 0 if job started but did not yet complete 
+ 94          if a cron job started within less than 60 seconds, acquire returns None 
+ 95          if a cron job started before 60 seconds and did not stop, 
+ 96          a warning is issue "Stale cron.master detected" 
+ 97          """ 
+ 98          if portalocker.LOCK_EX == None: 
+ 99              logger.warning('WEB2PY CRON: Disabled because no file locking') 
+100              return None 
+101          self.master = open(self.path,'rb+') 
+102          try: 
+103              ret = None 
+104              portalocker.lock(self.master,portalocker.LOCK_EX) 
+105              try: 
+106                  (start, stop) =  cPickle.load(self.master) 
+107              except: 
+108                  (start, stop) = (0, 1) 
+109              if startup or self.now - start > 59.99: 
+110                  ret = self.now 
+111                  if not stop: 
+112                      # this happens if previous cron job longer than 1 minute 
+113                      logger.warning('WEB2PY CRON: Stale cron.master detected') 
+114                  logger.debug('WEB2PY CRON: Acquiring lock') 
+115                  self.master.seek(0) 
+116                  cPickle.dump((self.now,0),self.master) 
+117          finally: 
+118              portalocker.unlock(self.master) 
+119          if not ret: 
+120              # do this so no need to release 
+121              self.master.close() 
+122          return ret 
+
    123   
+
    124 -    def release(self): 
+
    125          """ 
+126          this function writes into cron.master the time when cron job 
+127          was completed 
+128          """ 
+129          if not self.master.closed: 
+130              portalocker.lock(self.master,portalocker.LOCK_EX) 
+131              logger.debug('WEB2PY CRON: Releasing cron lock') 
+132              self.master.seek(0) 
+133              (start, stop) =  cPickle.load(self.master) 
+134              if start == self.now: # if this is my lock 
+135                  self.master.seek(0) 
+136                  cPickle.dump((self.now,time.time()),self.master) 
+137              portalocker.unlock(self.master) 
+138              self.master.close() 
+
    139   
+140   
+
    141 -def rangetolist(s, period='min'): 
+
    142      retval = [] 
+143      if s.startswith('*'): 
+144          if period == 'min': 
+145              s = s.replace('*', '0-59', 1) 
+146          elif period == 'hr': 
+147              s = s.replace('*', '0-23', 1) 
+148          elif period == 'dom': 
+149              s = s.replace('*', '1-31', 1) 
+150          elif period == 'mon': 
+151              s = s.replace('*', '1-12', 1) 
+152          elif period == 'dow': 
+153              s = s.replace('*', '0-6', 1) 
+154      m = re.compile(r'(\d+)-(\d+)/(\d+)') 
+155      match = m.match(s) 
+156      if match: 
+157          for i in range(int(match.group(1)), int(match.group(2)) + 1): 
+158              if i % int(match.group(3)) == 0: 
+159                  retval.append(i) 
+160      return retval 
+
    161   
+162   
+
    163 -def parsecronline(line): 
+
    164      task = {} 
+165      if line.startswith('@reboot'): 
+166          line=line.replace('@reboot', '-1 * * * *') 
+167      elif line.startswith('@yearly'): 
+168          line=line.replace('@yearly', '0 0 1 1 *') 
+169      elif line.startswith('@annually'): 
+170          line=line.replace('@annually', '0 0 1 1 *') 
+171      elif line.startswith('@monthly'): 
+172          line=line.replace('@monthly', '0 0 1 * *') 
+173      elif line.startswith('@weekly'): 
+174          line=line.replace('@weekly', '0 0 * * 0') 
+175      elif line.startswith('@daily'): 
+176          line=line.replace('@daily', '0 0 * * *') 
+177      elif line.startswith('@midnight'): 
+178          line=line.replace('@midnight', '0 0 * * *') 
+179      elif line.startswith('@hourly'): 
+180          line=line.replace('@hourly', '0 * * * *') 
+181      params = line.strip().split(None, 6) 
+182      if len(params) < 7: 
+183          return None 
+184      daysofweek={'sun':0,'mon':1,'tue':2,'wed':3,'thu':4,'fri':5,'sat':6} 
+185      for (s, id) in zip(params[:5], ['min', 'hr', 'dom', 'mon', 'dow']): 
+186          if not s in [None, '*']: 
+187              task[id] = [] 
+188              vals = s.split(',') 
+189              for val in vals: 
+190                  if val != '-1' and '-' in val and '/' not in val: 
+191                      val = '%s/1' % val 
+192                  if '/' in val: 
+193                      task[id] += rangetolist(val, id) 
+194                  elif val.isdigit() or val=='-1': 
+195                      task[id].append(int(val)) 
+196                  elif id=='dow' and val[:3].lower() in daysofweek: 
+197                      task[id].append(daysofweek(val[:3].lower())) 
+198      task['user'] = params[5] 
+199      task['cmd'] = params[6] 
+200      return task 
+
    201   
+202   
+
    203 -class cronlauncher(threading.Thread): 
+
    204   
+
    205 -    def __init__(self, cmd, shell=True): 
+
    206          threading.Thread.__init__(self) 
+207          if platform.system() == 'Windows': 
+208              shell = False 
+209          elif isinstance(cmd,list): 
+210              cmd = ' '.join(cmd) 
+211          self.cmd = cmd 
+212          self.shell = shell 
+
    213   
+
    214 -    def run(self): 
+
    215          import subprocess 
+216          proc = subprocess.Popen(self.cmd, 
+217                                  stdin=subprocess.PIPE, 
+218                                  stdout=subprocess.PIPE, 
+219                                  stderr=subprocess.PIPE, 
+220                                  shell=self.shell) 
+221          (stdoutdata,stderrdata) = proc.communicate() 
+222          if proc.returncode != 0: 
+223              logger.warning( 
+224                  'WEB2PY CRON Call returned code %s:\n%s' % \ 
+225                      (proc.returncode, stdoutdata+stderrdata)) 
+226          else: 
+227              logger.debug('WEB2PY CRON Call returned success:\n%s' \ 
+228                                % stdoutdata) 
+
    229   
+
    230 -def crondance(applications_parent, ctype='soft', startup=False): 
+
    231      apppath = os.path.join(applications_parent,'applications') 
+232      cron_path = os.path.join(apppath,'admin','cron') 
+233      token = Token(cron_path) 
+234      cronmaster = token.acquire(startup=startup) 
+235      if not cronmaster: 
+236          return 
+237      now_s = time.localtime() 
+238      checks=(('min',now_s.tm_min), 
+239              ('hr',now_s.tm_hour), 
+240              ('mon',now_s.tm_mon), 
+241              ('dom',now_s.tm_mday), 
+242              ('dow',(now_s.tm_wday+1)%7)) 
+243   
+244      apps = [x for x in os.listdir(apppath) 
+245              if os.path.isdir(os.path.join(apppath, x))] 
+246   
+247      for app in apps: 
+248          if _cron_stopping: 
+249              break; 
+250          apath = os.path.join(apppath,app) 
+251          cronpath = os.path.join(apath, 'cron') 
+252          crontab = os.path.join(cronpath, 'crontab') 
+253          if not os.path.exists(crontab): 
+254              continue 
+255          try: 
+256              cronlines = fileutils.readlines_file(crontab, 'rt') 
+257              lines = [x.strip() for x in cronlines if x.strip() and not x.strip().startswith('#')] 
+258              tasks = [parsecronline(cline) for cline in lines] 
+259          except Exception, e: 
+260              logger.error('WEB2PY CRON: crontab read error %s' % e) 
+261              continue 
+262   
+263          for task in tasks: 
+264              if _cron_stopping: 
+265                  break; 
+266              commands = [sys.executable] 
+267              w2p_path = fileutils.abspath('web2py.py', gluon=True) 
+268              if os.path.exists(w2p_path): 
+269                  commands.append(w2p_path) 
+270              if global_settings.applications_parent != global_settings.gluon_parent: 
+271                  commands.extend(('-f', global_settings.applications_parent)) 
+272              citems = [(k in task and not v in task[k]) for k,v in checks] 
+273              task_min= task.get('min',[]) 
+274              if not task: 
+275                  continue 
+276              elif not startup and task_min == [-1]: 
+277                  continue 
+278              elif task_min != [-1] and reduce(lambda a,b: a or b, citems): 
+279                  continue 
+280              logger.info('WEB2PY CRON (%s): %s executing %s in %s at %s' \ 
+281                               % (ctype, app, task.get('cmd'), 
+282                                  os.getcwd(), datetime.datetime.now())) 
+283              action, command, models = False, task['cmd'], '' 
+284              if command.startswith('**'): 
+285                  (action,models,command) = (True,'',command[2:]) 
+286              elif command.startswith('*'): 
+287                  (action,models,command) = (True,'-M',command[1:]) 
+288              else: 
+289                  action=False 
+290              if action and command.endswith('.py'): 
+291                  commands.extend(('-J',                # cron job 
+292                                   models,              # import models? 
+293                                   '-S', app,           # app name 
+294                                   '-a', '"<recycle>"', # password 
+295                                   '-R', command))      # command 
+296                  shell = True 
+297              elif action: 
+298                  commands.extend(('-J',                  # cron job 
+299                                   models,                # import models? 
+300                                   '-S', app+'/'+command, # app name 
+301                                   '-a', '"<recycle>"'))  # password 
+302                  shell = True 
+303              else: 
+304                  commands = command 
+305                  shell = False 
+306              try: 
+307                  cronlauncher(commands, shell=shell).start() 
+308              except Exception, e: 
+309                  logger.warning( 
+310                      'WEB2PY CRON: Execution error for %s: %s' \ 
+311                          % (task.get('cmd'), e)) 
+312      token.release() 
+
    313   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:08 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.newcron.Token-class.html
Index: applications/examples/static/epydoc/web2py.gluon.newcron.Token-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.newcron.Token-class.html
@@ -0,0 +1,309 @@
+
+
+
+
+  web2py.gluon.newcron.Token
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module newcron ::
+        Class Token
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Token
    source code

    
+
    +object --+
+         |
+        Token
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        path)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    acquire(self,
+        startup=True)
    
+      returns the time when the lock is acquired or None if cron already
+      running    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    release(self)
    
+      this function writes into cron.master the time when cron job was 
+      completed    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        path)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    acquire(self,
+        startup=True)
+  
    
+      		source code 
+    
    
+  
+  
    returns the time when the lock is acquired or None if cron already 
+  running
    
+  lock is implemented by writing a pickle (start, stop) in cron.master 
+  start is time when cron job starts and stop is time when cron completed 
+  stop == 0 if job started but did not yet complete if a cron job started 
+  within less than 60 seconds, acquire returns None if a cron job started 
+  before 60 seconds and did not stop, a warning is issue "Stale 
+  cron.master detected"
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.newcron.cronlauncher-class.html
Index: applications/examples/static/epydoc/web2py.gluon.newcron.cronlauncher-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.newcron.cronlauncher-class.html
@@ -0,0 +1,300 @@
+
+
+
+
+  web2py.gluon.newcron.cronlauncher
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module newcron ::
+        Class cronlauncher
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class cronlauncher
    source code

    
+
    +        object --+        
+                 |        
+threading._Verbose --+    
+                     |    
+      threading.Thread --+
+                         |
+                        cronlauncher
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        cmd,
+        shell=True)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    run(self)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from threading.Thread:
+      __repr__,
+      getName,
+      isAlive,
+      isDaemon,
+      join,
+      setDaemon,
+      setName,
+      start
+      
    
+    
        
    Inherited from threading.Thread (private):
+      _set_daemon
+      
    
+    
        
    Inherited from threading._Verbose (private):
+      _note
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        cmd,
+        shell=True)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      threading.Thread.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    run(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      threading.Thread.run
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.newcron.extcron-class.html
Index: applications/examples/static/epydoc/web2py.gluon.newcron.extcron-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.newcron.extcron-class.html
@@ -0,0 +1,298 @@
+
+
+
+
+  web2py.gluon.newcron.extcron
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module newcron ::
+        Class extcron
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class extcron
    source code

    
+
    +        object --+        
+                 |        
+threading._Verbose --+    
+                     |    
+      threading.Thread --+
+                         |
+                        extcron
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        applications_parent)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    run(self)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from threading.Thread:
+      __repr__,
+      getName,
+      isAlive,
+      isDaemon,
+      join,
+      setDaemon,
+      setName,
+      start
+      
    
+    
        
    Inherited from threading.Thread (private):
+      _set_daemon
+      
    
+    
        
    Inherited from threading._Verbose (private):
+      _note
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        applications_parent)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      threading.Thread.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    run(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      threading.Thread.run
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.newcron.hardcron-class.html
Index: applications/examples/static/epydoc/web2py.gluon.newcron.hardcron-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.newcron.hardcron-class.html
@@ -0,0 +1,314 @@
+
+
+
+
+  web2py.gluon.newcron.hardcron
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module newcron ::
+        Class hardcron
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class hardcron
    source code

    
+
    +        object --+        
+                 |        
+threading._Verbose --+    
+                     |    
+      threading.Thread --+
+                         |
+                        hardcron
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        applications_parent)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    launch(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    run(self)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from threading.Thread:
+      __repr__,
+      getName,
+      isAlive,
+      isDaemon,
+      join,
+      setDaemon,
+      setName,
+      start
+      
    
+    
        
    Inherited from threading.Thread (private):
+      _set_daemon
+      
    
+    
        
    Inherited from threading._Verbose (private):
+      _note
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        applications_parent)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      threading.Thread.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    run(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      threading.Thread.run
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.newcron.softcron-class.html
Index: applications/examples/static/epydoc/web2py.gluon.newcron.softcron-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.newcron.softcron-class.html
@@ -0,0 +1,298 @@
+
+
+
+
+  web2py.gluon.newcron.softcron
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module newcron ::
+        Class softcron
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class softcron
    source code

    
+
    +        object --+        
+                 |        
+threading._Verbose --+    
+                     |    
+      threading.Thread --+
+                         |
+                        softcron
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        applications_parent)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    run(self)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from threading.Thread:
+      __repr__,
+      getName,
+      isAlive,
+      isDaemon,
+      join,
+      setDaemon,
+      setName,
+      start
+      
    
+    
        
    Inherited from threading.Thread (private):
+      _set_daemon
+      
    
+    
        
    Inherited from threading._Verbose (private):
+      _note
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        applications_parent)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      threading.Thread.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    run(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      threading.Thread.run
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.portalocker-module.html
Index: applications/examples/static/epydoc/web2py.gluon.portalocker-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.portalocker-module.html
@@ -0,0 +1,268 @@
+
+
+
+
+  web2py.gluon.portalocker
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module portalocker
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module portalocker
    source code

    
+
    +
+Cross-platform (posix/nt) API for flock-style file locking.
+
+Synopsis:
+
+   import portalocker
+   file = open("somefile", "r+")
+   portalocker.lock(file, portalocker.LOCK_EX)
+   file.seek(12)
+   file.write("foo")
+   file.close()
+
+If you know what you're doing, you may choose to
+
+   portalocker.unlock(file)
+
+before closing the file, but why?
+
+Methods:
+
+   lock( file, flags )
+   unlock( file )
+
+Constants:
+
+   LOCK_EX
+   LOCK_SH
+   LOCK_NB
+
+I learned the win32 technique for locking files from sample code
+provided by John Nielsen <nielsenjf@my-deja.com> in the documentation
+that accompanies the win32 modules.
+
+Author: Jonathan Feinberg <jdf@pobox.com>
+Version: $Id: portalocker.py,v 1.3 2001/05/29 18:47:55 Administrator Exp $
+
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    lock(file,
+        flags)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    unlock(file)
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        logger = logging.getLogger("web2py")
+    
    
+       
+    
+        os_locking = 'posix'
+    
    
+       
+    
+        __overlapped = pywintypes.OVERLAPPED()
+    
    
+       
+    
+        LOCK_EX = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        LOCK_SH = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        LOCK_NB = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.portalocker-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.portalocker-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.portalocker-pysrc.html
@@ -0,0 +1,298 @@
+
+
+
+
+  web2py.gluon.portalocker
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module portalocker
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.portalocker
    
+
    +  1  #!/usr/bin/env python 
+  2  # -*- coding: utf-8 -*- 
+  3  # portalocker.py - Cross-platform (posix/nt) API for flock-style file locking. 
+  4  #                  Requires python 1.5.2 or better. 
+  5   
+  6  """ 
+  7  Cross-platform (posix/nt) API for flock-style file locking. 
+  8   
+  9  Synopsis: 
+ 10   
+ 11     import portalocker 
+ 12     file = open(\"somefile\", \"r+\") 
+ 13     portalocker.lock(file, portalocker.LOCK_EX) 
+ 14     file.seek(12) 
+ 15     file.write(\"foo\") 
+ 16     file.close() 
+ 17   
+ 18  If you know what you're doing, you may choose to 
+ 19   
+ 20     portalocker.unlock(file) 
+ 21   
+ 22  before closing the file, but why? 
+ 23   
+ 24  Methods: 
+ 25   
+ 26     lock( file, flags ) 
+ 27     unlock( file ) 
+ 28   
+ 29  Constants: 
+ 30   
+ 31     LOCK_EX 
+ 32     LOCK_SH 
+ 33     LOCK_NB 
+ 34   
+ 35  I learned the win32 technique for locking files from sample code 
+ 36  provided by John Nielsen <nielsenjf@my-deja.com> in the documentation 
+ 37  that accompanies the win32 modules. 
+ 38   
+ 39  Author: Jonathan Feinberg <jdf@pobox.com> 
+ 40  Version: $Id: portalocker.py,v 1.3 2001/05/29 18:47:55 Administrator Exp $ 
+ 41  """ 
+ 42   
+ 43  import os 
+ 44  import logging 
+ 45  import platform 
+ 46  logger = logging.getLogger("web2py") 
+ 47   
+ 48  os_locking = None 
+ 49  try: 
+ 50      import fcntl 
+ 51      os_locking = 'posix' 
+ 52  except: 
+ 53      pass 
+ 54  try: 
+ 55      import win32con 
+ 56      import win32file 
+ 57      import pywintypes 
+ 58      os_locking = 'windows' 
+ 59  except: 
+ 60      pass 
+ 61   
+ 62  if os_locking == 'windows': 
+ 63      LOCK_EX = win32con.LOCKFILE_EXCLUSIVE_LOCK 
+ 64      LOCK_SH = 0  # the default 
+ 65      LOCK_NB = win32con.LOCKFILE_FAIL_IMMEDIATELY 
+ 66   
+ 67      # is there any reason not to reuse the following structure? 
+ 68   
+ 69      __overlapped = pywintypes.OVERLAPPED() 
+ 70   
+
     71 -    def lock(file, flags): 
+
     72          hfile = win32file._get_osfhandle(file.fileno()) 
+ 73          win32file.LockFileEx(hfile, flags, 0, 0x7fff0000, __overlapped) 
+
     74   
+
     75 -    def unlock(file): 
+
     76          hfile = win32file._get_osfhandle(file.fileno()) 
+ 77          win32file.UnlockFileEx(hfile, 0, 0x7fff0000, __overlapped) 
+
     78   
+ 79   
+ 80  elif os_locking == 'posix': 
+ 81      LOCK_EX = fcntl.LOCK_EX 
+ 82      LOCK_SH = fcntl.LOCK_SH 
+ 83      LOCK_NB = fcntl.LOCK_NB 
+ 84   
+
     85 -    def lock(file, flags): 
+
     86          fcntl.flock(file.fileno(), flags) 
+
     87   
+
     88 -    def unlock(file): 
+
     89          fcntl.flock(file.fileno(), fcntl.LOCK_UN) 
+
     90   
+ 91   
+ 92  else: 
+ 93      if platform.system() == 'Windows': 
+ 94          logger.error('no file locking, you must install the win32 extensions from: http://sourceforge.net/projects/pywin32/files/') 
+ 95      else: 
+ 96          logger.debug('no file locking, this will cause problems') 
+ 97   
+ 98      LOCK_EX = None 
+ 99      LOCK_SH = None 
+100      LOCK_NB = None 
+101   
+
    102 -    def lock(file, flags): 
+
    103          pass 
+
    104   
+
    105 -    def unlock(file): 
+
    106          pass 
+
    107   
+108   
+109  if __name__ == '__main__': 
+110      from time import time, strftime, localtime 
+111      import sys 
+112   
+113      log = open('log.txt', 'a+') 
+114      lock(log, LOCK_EX) 
+115   
+116      timestamp = strftime('%m/%d/%Y %H:%M:%S\n', localtime(time())) 
+117      log.write(timestamp) 
+118   
+119      print 'Wrote lines. Hit enter to release lock.' 
+120      dummy = sys.stdin.readline() 
+121   
+122      log.close() 
+123   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:08 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.reserved_sql_keywords-module.html
Index: applications/examples/static/epydoc/web2py.gluon.reserved_sql_keywords-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.reserved_sql_keywords-module.html
@@ -0,0 +1,774 @@
+
+
+
+
+  web2py.gluon.reserved_sql_keywords
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module reserved_sql_keywords
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module reserved_sql_keywords
    source code

    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        __author__ = 'Thadeus Burgess <thadeusb@thadeusb.com>'
+    
    
+       
+    
+        COMMON = set(['ALTER', 'AND', 'AS', 'BY', 'CASE', 'CREATE', 'D...
+    
    
+       
+    
+        POSTGRESQL = set(['ALL', 'ANALYSE', 'ANALYZE', 'AND', 'ANY', '...
+    
    
+       
+    
+        POSTGRESQL_NONRESERVED = set(['A', 'ABORT', 'ABS', 'ABSENT', '...
+    
    
+       
+    
+        FIREBIRD = set(['ABS', 'ACTIVE', 'ADMIN', 'AFTER', 'ASCENDING'...
+    
    
+       
+    
+        FIREBIRD_NONRESERVED = set(['ABS', 'ACCENT', 'ACOS', 'ALWAYS',...
+    
    
+       
+    
+        MYSQL = set(['ACCESSIBLE', 'ADD', 'ALL', 'ALTER', 'ANALYZE', '...
+    
    
+       
+    
+        MSSQL = set(['ADD', 'ALL', 'ALTER', 'AND', 'ANY', 'AS', 'ASC',...
+    
    
+       
+    
+        ORACLE = set(['ACCESS', 'ADD', 'ALL', 'ALTER', 'AND', 'ANY', '...
+    
    
+       
+    
+        SQLITE = set(['ABORT', 'ACTION', 'ADD', 'AFTER', 'ALL', 'ALTER...
+    
    
+       
+    
+        JDBCSQLITE = set(['ABORT', 'ACTION', 'ADD', 'AFTER', 'ALL', 'A...
+    
    
+       
+    
+        JDBCPOSTGRESQL = set(['ALTER', 'AND', 'AS', 'BY', 'CASE', 'CRE...
+    
    
+       
+    
+        INGRES = set(['ALTER', 'AND', 'AS', 'BY', 'CASE', 'CREATE', 'D...
+    
    
+       
+    
+        INFORMIX = set(['ALTER', 'AND', 'AS', 'BY', 'CASE', 'CREATE', ...
+    
    
+       
+    
+        DB2 = set(['ALTER', 'AND', 'AS', 'BY', 'CASE', 'CREATE', 'DELE...
+    
    
+       
+    
+        ADAPTERS = {'all': set(['A', 'ABORT', 'ABS', 'ABSENT', 'ABSOLU...
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Variables Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    COMMON
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +set(['ALTER',
+     'AND',
+     'AS',
+     'BY',
+     'CASE',
+     'CREATE',
+     'DELETE',
+     'DISTINCT',
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    POSTGRESQL
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +set(['ALL',
+     'ANALYSE',
+     'ANALYZE',
+     'AND',
+     'ANY',
+     'ARRAY',
+     'AS',
+     'ASC',
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    POSTGRESQL_NONRESERVED
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +set(['A',
+     'ABORT',
+     'ABS',
+     'ABSENT',
+     'ABSOLUTE',
+     'ACCESS',
+     'ACCORDING',
+     'ACTION',
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    FIREBIRD
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +set(['ABS',
+     'ACTIVE',
+     'ADMIN',
+     'AFTER',
+     'ASCENDING',
+     'AUTO',
+     'AUTODDL',
+     'BASED',
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    FIREBIRD_NONRESERVED
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +set(['ABS',
+     'ACCENT',
+     'ACOS',
+     'ALWAYS',
+     'ASCII_CHAR',
+     'ASCII_VAL',
+     'ASIN',
+     'ATAN',
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    MYSQL
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +set(['ACCESSIBLE',
+     'ADD',
+     'ALL',
+     'ALTER',
+     'ANALYZE',
+     'AND',
+     'AS',
+     'ASC',
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    MSSQL
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +set(['ADD',
+     'ALL',
+     'ALTER',
+     'AND',
+     'ANY',
+     'AS',
+     'ASC',
+     'AUTHORIZATION',
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    ORACLE
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +set(['ACCESS',
+     'ADD',
+     'ALL',
+     'ALTER',
+     'AND',
+     'ANY',
+     'AS',
+     'ASC',
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    SQLITE
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +set(['ABORT',
+     'ACTION',
+     'ADD',
+     'AFTER',
+     'ALL',
+     'ALTER',
+     'ANALYZE',
+     'AND',
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    JDBCSQLITE
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +set(['ABORT',
+     'ACTION',
+     'ADD',
+     'AFTER',
+     'ALL',
+     'ALTER',
+     'ANALYZE',
+     'AND',
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    JDBCPOSTGRESQL
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +set(['ALTER',
+     'AND',
+     'AS',
+     'BY',
+     'CASE',
+     'CREATE',
+     'DELETE',
+     'DISTINCT',
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    INGRES
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +set(['ALTER',
+     'AND',
+     'AS',
+     'BY',
+     'CASE',
+     'CREATE',
+     'DELETE',
+     'DISTINCT',
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    INFORMIX
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +set(['ALTER',
+     'AND',
+     'AS',
+     'BY',
+     'CASE',
+     'CREATE',
+     'DELETE',
+     'DISTINCT',
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    DB2
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +set(['ALTER',
+     'AND',
+     'AS',
+     'BY',
+     'CASE',
+     'CREATE',
+     'DELETE',
+     'DISTINCT',
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    ADAPTERS
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'all': set(['A',
+             'ABORT',
+             'ABS',
+             'ABSENT',
+             'ABSOLUTE',
+             'ACCENT',
+             'ACCESS',
+             'ACCESSIBLE',
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.reserved_sql_keywords-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.reserved_sql_keywords-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.reserved_sql_keywords-pysrc.html
@@ -0,0 +1,1838 @@
+
+
+
+
+  web2py.gluon.reserved_sql_keywords
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module reserved_sql_keywords
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.reserved_sql_keywords
    
+
    +   1  # encoding utf-8 
+   2   
+   3  __author__ = "Thadeus Burgess <thadeusb@thadeusb.com>" 
+   4   
+   5  #    we classify as "non-reserved" those key words that are explicitly known 
+   6  #    to the parser but are allowed as column or table names. Some key words 
+   7  #    that are otherwise non-reserved cannot be used as function or data type n 
+   8  #    ames and are in the nonreserved list. (Most of these words represent 
+   9  #    built-in functions or data types with special syntax. The function 
+  10  #    or type is still available but it cannot be redefined by the user.) 
+  11  #    Labeled "reserved" are those tokens that are not allowed as column or 
+  12  #    table names. Some reserved key words are allowable as names for 
+  13  #    functions or data typesself. 
+  14   
+  15  # Note at the bottom of the list is a dict containing references to the 
+  16  # tuples, and also if you add a list don't forget to remove its default 
+  17  # set of COMMON. 
+  18   
+  19  # Keywords that are adapter specific. Such as a list of "postgresql" 
+  20  # or "mysql" keywords 
+  21   
+  22  # These are keywords that are common to all SQL dialects, and should 
+  23  # never be used as a table or column. Even if you use one of these 
+  24  # the cursor will throw an OperationalError for the SQL syntax. 
+  25  COMMON = set(( 
+  26      'SELECT', 
+  27      'INSERT', 
+  28      'DELETE', 
+  29      'UPDATE', 
+  30      'DROP', 
+  31      'CREATE', 
+  32      'ALTER', 
+  33   
+  34      'WHERE', 
+  35      'FROM', 
+  36      'INNER', 
+  37      'JOIN', 
+  38      'AND', 
+  39      'OR', 
+  40      'LIKE', 
+  41      'ON', 
+  42      'IN', 
+  43      'SET', 
+  44   
+  45      'BY', 
+  46      'GROUP', 
+  47      'ORDER', 
+  48      'LEFT', 
+  49      'OUTER', 
+  50   
+  51      'IF', 
+  52      'END', 
+  53      'THEN', 
+  54      'LOOP', 
+  55      'AS', 
+  56      'ELSE', 
+  57      'FOR', 
+  58   
+  59      'CASE', 
+  60      'WHEN', 
+  61      'MIN', 
+  62      'MAX', 
+  63      'DISTINCT', 
+  64  )) 
+  65   
+  66   
+  67  POSTGRESQL = set(( 
+  68      'FALSE', 
+  69      'TRUE', 
+  70      'ALL', 
+  71      'ANALYSE', 
+  72      'ANALYZE', 
+  73      'AND', 
+  74      'ANY', 
+  75      'ARRAY', 
+  76      'AS', 
+  77      'ASC', 
+  78      'ASYMMETRIC', 
+  79      'AUTHORIZATION', 
+  80      'BETWEEN', 
+  81      'BIGINT', 
+  82      'BINARY', 
+  83      'BIT', 
+  84      'BOOLEAN', 
+  85      'BOTH', 
+  86      'CASE', 
+  87      'CAST', 
+  88      'CHAR', 
+  89      'CHARACTER', 
+  90      'CHECK', 
+  91      'COALESCE', 
+  92      'COLLATE', 
+  93      'COLUMN', 
+  94      'CONSTRAINT', 
+  95      'CREATE', 
+  96      'CROSS', 
+  97      'CURRENT_CATALOG', 
+  98      'CURRENT_DATE', 
+  99      'CURRENT_ROLE', 
+ 100      'CURRENT_SCHEMA', 
+ 101      'CURRENT_TIME', 
+ 102      'CURRENT_TIMESTAMP', 
+ 103      'CURRENT_USER', 
+ 104      'DEC', 
+ 105      'DECIMAL', 
+ 106      'DEFAULT', 
+ 107      'DEFERRABLE', 
+ 108      'DESC', 
+ 109      'DISTINCT', 
+ 110      'DO', 
+ 111      'ELSE', 
+ 112      'END', 
+ 113      'EXCEPT', 
+ 114      'EXISTS', 
+ 115      'EXTRACT', 
+ 116      'FETCH', 
+ 117      'FLOAT', 
+ 118      'FOR', 
+ 119      'FOREIGN', 
+ 120      'FREEZE', 
+ 121      'FROM', 
+ 122      'FULL', 
+ 123      'GRANT', 
+ 124      'GREATEST', 
+ 125      'GROUP', 
+ 126      'HAVING', 
+ 127      'ILIKE', 
+ 128      'IN', 
+ 129      'INITIALLY', 
+ 130      'INNER', 
+ 131      'INOUT', 
+ 132      'INT', 
+ 133      'INTEGER', 
+ 134      'INTERSECT', 
+ 135      'INTERVAL', 
+ 136      'INTO', 
+ 137      'IS', 
+ 138      'ISNULL', 
+ 139      'JOIN', 
+ 140      'LEADING', 
+ 141      'LEAST', 
+ 142      'LEFT', 
+ 143      'LIKE', 
+ 144      'LIMIT', 
+ 145      'LOCALTIME', 
+ 146      'LOCALTIMESTAMP', 
+ 147      'NATIONAL', 
+ 148      'NATURAL', 
+ 149      'NCHAR', 
+ 150      'NEW', 
+ 151      'NONE', 
+ 152      'NOT', 
+ 153      'NOTNULL', 
+ 154      'NULL', 
+ 155      'NULLIF', 
+ 156      'NUMERIC', 
+ 157      'OFF', 
+ 158      'OFFSET', 
+ 159      'OLD', 
+ 160      'ON', 
+ 161      'ONLY', 
+ 162      'OR', 
+ 163      'ORDER', 
+ 164      'OUT', 
+ 165      'OUTER', 
+ 166      'OVERLAPS', 
+ 167      'OVERLAY', 
+ 168      'PLACING', 
+ 169      'POSITION', 
+ 170      'PRECISION', 
+ 171      'PRIMARY', 
+ 172      'REAL', 
+ 173      'REFERENCES', 
+ 174      'RETURNING', 
+ 175      'RIGHT', 
+ 176      'ROW', 
+ 177      'SELECT', 
+ 178      'SESSION_USER', 
+ 179      'SETOF', 
+ 180      'SIMILAR', 
+ 181      'SMALLINT', 
+ 182      'SOME', 
+ 183      'SUBSTRING', 
+ 184      'SYMMETRIC', 
+ 185      'TABLE', 
+ 186      'THEN', 
+ 187      'TIME', 
+ 188      'TIMESTAMP', 
+ 189      'TO', 
+ 190      'TRAILING', 
+ 191      'TREAT', 
+ 192      'TRIM', 
+ 193      'UNION', 
+ 194      'UNIQUE', 
+ 195      'USER', 
+ 196      'USING', 
+ 197      'VALUES', 
+ 198      'VARCHAR', 
+ 199      'VARIADIC', 
+ 200      'VERBOSE', 
+ 201      'WHEN', 
+ 202      'WHERE', 
+ 203      'WITH', 
+ 204      'XMLATTRIBUTES', 
+ 205      'XMLCONCAT', 
+ 206      'XMLELEMENT', 
+ 207      'XMLFOREST', 
+ 208      'XMLPARSE', 
+ 209      'XMLPI', 
+ 210      'XMLROOT', 
+ 211      'XMLSERIALIZE', 
+ 212  )) 
+ 213   
+ 214   
+ 215  POSTGRESQL_NONRESERVED = set(( 
+ 216      'A', 
+ 217      'ABORT', 
+ 218      'ABS', 
+ 219      'ABSENT', 
+ 220      'ABSOLUTE', 
+ 221      'ACCESS', 
+ 222      'ACCORDING', 
+ 223      'ACTION', 
+ 224      'ADA', 
+ 225      'ADD', 
+ 226      'ADMIN', 
+ 227      'AFTER', 
+ 228      'AGGREGATE', 
+ 229      'ALIAS', 
+ 230      'ALLOCATE', 
+ 231      'ALSO', 
+ 232      'ALTER', 
+ 233      'ALWAYS', 
+ 234      'ARE', 
+ 235      'ARRAY_AGG', 
+ 236      'ASENSITIVE', 
+ 237      'ASSERTION', 
+ 238      'ASSIGNMENT', 
+ 239      'AT', 
+ 240      'ATOMIC', 
+ 241      'ATTRIBUTE', 
+ 242      'ATTRIBUTES', 
+ 243      'AVG', 
+ 244      'BACKWARD', 
+ 245      'BASE64', 
+ 246      'BEFORE', 
+ 247      'BEGIN', 
+ 248      'BERNOULLI', 
+ 249      'BIT_LENGTH', 
+ 250      'BITVAR', 
+ 251      'BLOB', 
+ 252      'BOM', 
+ 253      'BREADTH', 
+ 254      'BY', 
+ 255      'C', 
+ 256      'CACHE', 
+ 257      'CALL', 
+ 258      'CALLED', 
+ 259      'CARDINALITY', 
+ 260      'CASCADE', 
+ 261      'CASCADED', 
+ 262      'CATALOG', 
+ 263      'CATALOG_NAME', 
+ 264      'CEIL', 
+ 265      'CEILING', 
+ 266      'CHAIN', 
+ 267      'CHAR_LENGTH', 
+ 268      'CHARACTER_LENGTH', 
+ 269      'CHARACTER_SET_CATALOG', 
+ 270      'CHARACTER_SET_NAME', 
+ 271      'CHARACTER_SET_SCHEMA', 
+ 272      'CHARACTERISTICS', 
+ 273      'CHARACTERS', 
+ 274      'CHECKED', 
+ 275      'CHECKPOINT', 
+ 276      'CLASS', 
+ 277      'CLASS_ORIGIN', 
+ 278      'CLOB', 
+ 279      'CLOSE', 
+ 280      'CLUSTER', 
+ 281      'COBOL', 
+ 282      'COLLATION', 
+ 283      'COLLATION_CATALOG', 
+ 284      'COLLATION_NAME', 
+ 285      'COLLATION_SCHEMA', 
+ 286      'COLLECT', 
+ 287      'COLUMN_NAME', 
+ 288      'COLUMNS', 
+ 289      'COMMAND_FUNCTION', 
+ 290      'COMMAND_FUNCTION_CODE', 
+ 291      'COMMENT', 
+ 292      'COMMIT', 
+ 293      'COMMITTED', 
+ 294      'COMPLETION', 
+ 295      'CONCURRENTLY', 
+ 296      'CONDITION', 
+ 297      'CONDITION_NUMBER', 
+ 298      'CONFIGURATION', 
+ 299      'CONNECT', 
+ 300      'CONNECTION', 
+ 301      'CONNECTION_NAME', 
+ 302      'CONSTRAINT_CATALOG', 
+ 303      'CONSTRAINT_NAME', 
+ 304      'CONSTRAINT_SCHEMA', 
+ 305      'CONSTRAINTS', 
+ 306      'CONSTRUCTOR', 
+ 307      'CONTAINS', 
+ 308      'CONTENT', 
+ 309      'CONTINUE', 
+ 310      'CONVERSION', 
+ 311      'CONVERT', 
+ 312      'COPY', 
+ 313      'CORR', 
+ 314      'CORRESPONDING', 
+ 315      'COST', 
+ 316      'COUNT', 
+ 317      'COVAR_POP', 
+ 318      'COVAR_SAMP', 
+ 319      'CREATEDB', 
+ 320      'CREATEROLE', 
+ 321      'CREATEUSER', 
+ 322      'CSV', 
+ 323      'CUBE', 
+ 324      'CUME_DIST', 
+ 325      'CURRENT', 
+ 326      'CURRENT_DEFAULT_TRANSFORM_GROUP', 
+ 327      'CURRENT_PATH', 
+ 328      'CURRENT_TRANSFORM_GROUP_FOR_TYPE', 
+ 329      'CURSOR', 
+ 330      'CURSOR_NAME', 
+ 331      'CYCLE', 
+ 332      'DATA', 
+ 333      'DATABASE', 
+ 334      'DATE', 
+ 335      'DATETIME_INTERVAL_CODE', 
+ 336      'DATETIME_INTERVAL_PRECISION', 
+ 337      'DAY', 
+ 338      'DEALLOCATE', 
+ 339      'DECLARE', 
+ 340      'DEFAULTS', 
+ 341      'DEFERRED', 
+ 342      'DEFINED', 
+ 343      'DEFINER', 
+ 344      'DEGREE', 
+ 345      'DELETE', 
+ 346      'DELIMITER', 
+ 347      'DELIMITERS', 
+ 348      'DENSE_RANK', 
+ 349      'DEPTH', 
+ 350      'DEREF', 
+ 351      'DERIVED', 
+ 352      'DESCRIBE', 
+ 353      'DESCRIPTOR', 
+ 354      'DESTROY', 
+ 355      'DESTRUCTOR', 
+ 356      'DETERMINISTIC', 
+ 357      'DIAGNOSTICS', 
+ 358      'DICTIONARY', 
+ 359      'DISABLE', 
+ 360      'DISCARD', 
+ 361      'DISCONNECT', 
+ 362      'DISPATCH', 
+ 363      'DOCUMENT', 
+ 364      'DOMAIN', 
+ 365      'DOUBLE', 
+ 366      'DROP', 
+ 367      'DYNAMIC', 
+ 368      'DYNAMIC_FUNCTION', 
+ 369      'DYNAMIC_FUNCTION_CODE', 
+ 370      'EACH', 
+ 371      'ELEMENT', 
+ 372      'EMPTY', 
+ 373      'ENABLE', 
+ 374      'ENCODING', 
+ 375      'ENCRYPTED', 
+ 376      'END-EXEC', 
+ 377      'ENUM', 
+ 378      'EQUALS', 
+ 379      'ESCAPE', 
+ 380      'EVERY', 
+ 381      'EXCEPTION', 
+ 382      'EXCLUDE', 
+ 383      'EXCLUDING', 
+ 384      'EXCLUSIVE', 
+ 385      'EXEC', 
+ 386      'EXECUTE', 
+ 387      'EXISTING', 
+ 388      'EXP', 
+ 389      'EXPLAIN', 
+ 390      'EXTERNAL', 
+ 391      'FAMILY', 
+ 392      'FILTER', 
+ 393      'FINAL', 
+ 394      'FIRST', 
+ 395      'FIRST_VALUE', 
+ 396      'FLAG', 
+ 397      'FLOOR', 
+ 398      'FOLLOWING', 
+ 399      'FORCE', 
+ 400      'FORTRAN', 
+ 401      'FORWARD', 
+ 402      'FOUND', 
+ 403      'FREE', 
+ 404      'FUNCTION', 
+ 405      'FUSION', 
+ 406      'G', 
+ 407      'GENERAL', 
+ 408      'GENERATED', 
+ 409      'GET', 
+ 410      'GLOBAL', 
+ 411      'GO', 
+ 412      'GOTO', 
+ 413      'GRANTED', 
+ 414      'GROUPING', 
+ 415      'HANDLER', 
+ 416      'HEADER', 
+ 417      'HEX', 
+ 418      'HIERARCHY', 
+ 419      'HOLD', 
+ 420      'HOST', 
+ 421      'HOUR', 
+ 422  #    'ID', 
+ 423      'IDENTITY', 
+ 424      'IF', 
+ 425      'IGNORE', 
+ 426      'IMMEDIATE', 
+ 427      'IMMUTABLE', 
+ 428      'IMPLEMENTATION', 
+ 429      'IMPLICIT', 
+ 430      'INCLUDING', 
+ 431      'INCREMENT', 
+ 432      'INDENT', 
+ 433      'INDEX', 
+ 434      'INDEXES', 
+ 435      'INDICATOR', 
+ 436      'INFIX', 
+ 437      'INHERIT', 
+ 438      'INHERITS', 
+ 439      'INITIALIZE', 
+ 440      'INPUT', 
+ 441      'INSENSITIVE', 
+ 442      'INSERT', 
+ 443      'INSTANCE', 
+ 444      'INSTANTIABLE', 
+ 445      'INSTEAD', 
+ 446      'INTERSECTION', 
+ 447      'INVOKER', 
+ 448      'ISOLATION', 
+ 449      'ITERATE', 
+ 450      'K', 
+ 451      'KEY', 
+ 452      'KEY_MEMBER', 
+ 453      'KEY_TYPE', 
+ 454      'LAG', 
+ 455      'LANCOMPILER', 
+ 456      'LANGUAGE', 
+ 457      'LARGE', 
+ 458      'LAST', 
+ 459      'LAST_VALUE', 
+ 460      'LATERAL', 
+ 461      'LC_COLLATE', 
+ 462      'LC_CTYPE', 
+ 463      'LEAD', 
+ 464      'LENGTH', 
+ 465      'LESS', 
+ 466      'LEVEL', 
+ 467      'LIKE_REGEX', 
+ 468      'LISTEN', 
+ 469      'LN', 
+ 470      'LOAD', 
+ 471      'LOCAL', 
+ 472      'LOCATION', 
+ 473      'LOCATOR', 
+ 474      'LOCK', 
+ 475      'LOGIN', 
+ 476      'LOWER', 
+ 477      'M', 
+ 478      'MAP', 
+ 479      'MAPPING', 
+ 480      'MATCH', 
+ 481      'MATCHED', 
+ 482      'MAX', 
+ 483      'MAX_CARDINALITY', 
+ 484      'MAXVALUE', 
+ 485      'MEMBER', 
+ 486      'MERGE', 
+ 487      'MESSAGE_LENGTH', 
+ 488      'MESSAGE_OCTET_LENGTH', 
+ 489      'MESSAGE_TEXT', 
+ 490      'METHOD', 
+ 491      'MIN', 
+ 492      'MINUTE', 
+ 493      'MINVALUE', 
+ 494      'MOD', 
+ 495      'MODE', 
+ 496      'MODIFIES', 
+ 497      'MODIFY', 
+ 498      'MODULE', 
+ 499      'MONTH', 
+ 500      'MORE', 
+ 501      'MOVE', 
+ 502      'MULTISET', 
+ 503      'MUMPS', 
+ 504  #    'NAME', 
+ 505      'NAMES', 
+ 506      'NAMESPACE', 
+ 507      'NCLOB', 
+ 508      'NESTING', 
+ 509      'NEXT', 
+ 510      'NFC', 
+ 511      'NFD', 
+ 512      'NFKC', 
+ 513      'NFKD', 
+ 514      'NIL', 
+ 515      'NO', 
+ 516      'NOCREATEDB', 
+ 517      'NOCREATEROLE', 
+ 518      'NOCREATEUSER', 
+ 519      'NOINHERIT', 
+ 520      'NOLOGIN', 
+ 521      'NORMALIZE', 
+ 522      'NORMALIZED', 
+ 523      'NOSUPERUSER', 
+ 524      'NOTHING', 
+ 525      'NOTIFY', 
+ 526      'NOWAIT', 
+ 527      'NTH_VALUE', 
+ 528      'NTILE', 
+ 529      'NULLABLE', 
+ 530      'NULLS', 
+ 531      'NUMBER', 
+ 532      'OBJECT', 
+ 533      'OCCURRENCES_REGEX', 
+ 534      'OCTET_LENGTH', 
+ 535      'OCTETS', 
+ 536      'OF', 
+ 537      'OIDS', 
+ 538      'OPEN', 
+ 539      'OPERATION', 
+ 540      'OPERATOR', 
+ 541      'OPTION', 
+ 542      'OPTIONS', 
+ 543      'ORDERING', 
+ 544      'ORDINALITY', 
+ 545      'OTHERS', 
+ 546      'OUTPUT', 
+ 547      'OVER', 
+ 548      'OVERRIDING', 
+ 549      'OWNED', 
+ 550      'OWNER', 
+ 551      'P', 
+ 552      'PAD', 
+ 553      'PARAMETER', 
+ 554      'PARAMETER_MODE', 
+ 555      'PARAMETER_NAME', 
+ 556      'PARAMETER_ORDINAL_POSITION', 
+ 557      'PARAMETER_SPECIFIC_CATALOG', 
+ 558      'PARAMETER_SPECIFIC_NAME', 
+ 559      'PARAMETER_SPECIFIC_SCHEMA', 
+ 560      'PARAMETERS', 
+ 561      'PARSER', 
+ 562      'PARTIAL', 
+ 563      'PARTITION', 
+ 564      'PASCAL', 
+ 565      'PASSING', 
+ 566  #    'PASSWORD', 
+ 567      'PATH', 
+ 568      'PERCENT_RANK', 
+ 569      'PERCENTILE_CONT', 
+ 570      'PERCENTILE_DISC', 
+ 571      'PLANS', 
+ 572      'PLI', 
+ 573      'POSITION_REGEX', 
+ 574      'POSTFIX', 
+ 575      'POWER', 
+ 576      'PRECEDING', 
+ 577      'PREFIX', 
+ 578      'PREORDER', 
+ 579      'PREPARE', 
+ 580      'PREPARED', 
+ 581      'PRESERVE', 
+ 582      'PRIOR', 
+ 583      'PRIVILEGES', 
+ 584      'PROCEDURAL', 
+ 585      'PROCEDURE', 
+ 586      'PUBLIC', 
+ 587      'QUOTE', 
+ 588      'RANGE', 
+ 589      'RANK', 
+ 590      'READ', 
+ 591      'READS', 
+ 592      'REASSIGN', 
+ 593      'RECHECK', 
+ 594      'RECURSIVE', 
+ 595      'REF', 
+ 596      'REFERENCING', 
+ 597      'REGR_AVGX', 
+ 598      'REGR_AVGY', 
+ 599      'REGR_COUNT', 
+ 600      'REGR_INTERCEPT', 
+ 601      'REGR_R2', 
+ 602      'REGR_SLOPE', 
+ 603      'REGR_SXX', 
+ 604      'REGR_SXY', 
+ 605      'REGR_SYY', 
+ 606      'REINDEX', 
+ 607      'RELATIVE', 
+ 608      'RELEASE', 
+ 609      'RENAME', 
+ 610      'REPEATABLE', 
+ 611      'REPLACE', 
+ 612      'REPLICA', 
+ 613      'RESET', 
+ 614      'RESPECT', 
+ 615      'RESTART', 
+ 616      'RESTRICT', 
+ 617      'RESULT', 
+ 618      'RETURN', 
+ 619      'RETURNED_CARDINALITY', 
+ 620      'RETURNED_LENGTH', 
+ 621      'RETURNED_OCTET_LENGTH', 
+ 622      'RETURNED_SQLSTATE', 
+ 623      'RETURNS', 
+ 624      'REVOKE', 
+ 625  #    'ROLE', 
+ 626      'ROLLBACK', 
+ 627      'ROLLUP', 
+ 628      'ROUTINE', 
+ 629      'ROUTINE_CATALOG', 
+ 630      'ROUTINE_NAME', 
+ 631      'ROUTINE_SCHEMA', 
+ 632      'ROW_COUNT', 
+ 633      'ROW_NUMBER', 
+ 634      'ROWS', 
+ 635      'RULE', 
+ 636      'SAVEPOINT', 
+ 637      'SCALE', 
+ 638      'SCHEMA', 
+ 639      'SCHEMA_NAME', 
+ 640      'SCOPE', 
+ 641      'SCOPE_CATALOG', 
+ 642      'SCOPE_NAME', 
+ 643      'SCOPE_SCHEMA', 
+ 644      'SCROLL', 
+ 645      'SEARCH', 
+ 646      'SECOND', 
+ 647      'SECTION', 
+ 648      'SECURITY', 
+ 649      'SELF', 
+ 650      'SENSITIVE', 
+ 651      'SEQUENCE', 
+ 652      'SERIALIZABLE', 
+ 653      'SERVER', 
+ 654      'SERVER_NAME', 
+ 655      'SESSION', 
+ 656      'SET', 
+ 657      'SETS', 
+ 658      'SHARE', 
+ 659      'SHOW', 
+ 660      'SIMPLE', 
+ 661      'SIZE', 
+ 662      'SOURCE', 
+ 663      'SPACE', 
+ 664      'SPECIFIC', 
+ 665      'SPECIFIC_NAME', 
+ 666      'SPECIFICTYPE', 
+ 667      'SQL', 
+ 668      'SQLCODE', 
+ 669      'SQLERROR', 
+ 670      'SQLEXCEPTION', 
+ 671      'SQLSTATE', 
+ 672      'SQLWARNING', 
+ 673      'SQRT', 
+ 674      'STABLE', 
+ 675      'STANDALONE', 
+ 676      'START', 
+ 677      'STATE', 
+ 678      'STATEMENT', 
+ 679      'STATIC', 
+ 680      'STATISTICS', 
+ 681      'STDDEV_POP', 
+ 682      'STDDEV_SAMP', 
+ 683      'STDIN', 
+ 684      'STDOUT', 
+ 685      'STORAGE', 
+ 686      'STRICT', 
+ 687      'STRIP', 
+ 688      'STRUCTURE', 
+ 689      'STYLE', 
+ 690      'SUBCLASS_ORIGIN', 
+ 691      'SUBLIST', 
+ 692      'SUBMULTISET', 
+ 693      'SUBSTRING_REGEX', 
+ 694      'SUM', 
+ 695      'SUPERUSER', 
+ 696      'SYSID', 
+ 697      'SYSTEM', 
+ 698      'SYSTEM_USER', 
+ 699      'T', 
+ 700  #    'TABLE_NAME', 
+ 701      'TABLESAMPLE', 
+ 702      'TABLESPACE', 
+ 703      'TEMP', 
+ 704      'TEMPLATE', 
+ 705      'TEMPORARY', 
+ 706      'TERMINATE', 
+ 707      'TEXT', 
+ 708      'THAN', 
+ 709      'TIES', 
+ 710      'TIMEZONE_HOUR', 
+ 711      'TIMEZONE_MINUTE', 
+ 712      'TOP_LEVEL_COUNT', 
+ 713      'TRANSACTION', 
+ 714      'TRANSACTION_ACTIVE', 
+ 715      'TRANSACTIONS_COMMITTED', 
+ 716      'TRANSACTIONS_ROLLED_BACK', 
+ 717      'TRANSFORM', 
+ 718      'TRANSFORMS', 
+ 719      'TRANSLATE', 
+ 720      'TRANSLATE_REGEX', 
+ 721      'TRANSLATION', 
+ 722      'TRIGGER', 
+ 723      'TRIGGER_CATALOG', 
+ 724      'TRIGGER_NAME', 
+ 725      'TRIGGER_SCHEMA', 
+ 726      'TRIM_ARRAY', 
+ 727      'TRUNCATE', 
+ 728      'TRUSTED', 
+ 729      'TYPE', 
+ 730      'UESCAPE', 
+ 731      'UNBOUNDED', 
+ 732      'UNCOMMITTED', 
+ 733      'UNDER', 
+ 734      'UNENCRYPTED', 
+ 735      'UNKNOWN', 
+ 736      'UNLISTEN', 
+ 737      'UNNAMED', 
+ 738      'UNNEST', 
+ 739      'UNTIL', 
+ 740      'UNTYPED', 
+ 741      'UPDATE', 
+ 742      'UPPER', 
+ 743      'URI', 
+ 744      'USAGE', 
+ 745      'USER_DEFINED_TYPE_CATALOG', 
+ 746      'USER_DEFINED_TYPE_CODE', 
+ 747      'USER_DEFINED_TYPE_NAME', 
+ 748      'USER_DEFINED_TYPE_SCHEMA', 
+ 749      'VACUUM', 
+ 750      'VALID', 
+ 751      'VALIDATOR', 
+ 752      'VALUE', 
+ 753      'VAR_POP', 
+ 754      'VAR_SAMP', 
+ 755      'VARBINARY', 
+ 756      'VARIABLE', 
+ 757      'VARYING', 
+ 758      'VERSION', 
+ 759      'VIEW', 
+ 760      'VOLATILE', 
+ 761      'WHENEVER', 
+ 762      'WHITESPACE', 
+ 763      'WIDTH_BUCKET', 
+ 764      'WINDOW', 
+ 765      'WITHIN', 
+ 766      'WITHOUT', 
+ 767      'WORK', 
+ 768      'WRAPPER', 
+ 769      'WRITE', 
+ 770      'XML', 
+ 771      'XMLAGG', 
+ 772      'XMLBINARY', 
+ 773      'XMLCAST', 
+ 774      'XMLCOMMENT', 
+ 775      'XMLDECLARATION', 
+ 776      'XMLDOCUMENT', 
+ 777      'XMLEXISTS', 
+ 778      'XMLITERATE', 
+ 779      'XMLNAMESPACES', 
+ 780      'XMLQUERY', 
+ 781      'XMLSCHEMA', 
+ 782      'XMLTABLE', 
+ 783      'XMLTEXT', 
+ 784      'XMLVALIDATE', 
+ 785      'YEAR', 
+ 786      'YES', 
+ 787      'ZONE', 
+ 788  )) 
+ 789   
+ 790  #Thanks villas 
+ 791  FIREBIRD = set(( 
+ 792      'ABS', 
+ 793      'ACTIVE', 
+ 794      'ADMIN', 
+ 795      'AFTER', 
+ 796      'ASCENDING', 
+ 797      'AUTO', 
+ 798      'AUTODDL', 
+ 799      'BASED', 
+ 800      'BASENAME', 
+ 801      'BASE_NAME', 
+ 802      'BEFORE', 
+ 803      'BIT_LENGTH', 
+ 804      'BLOB', 
+ 805      'BLOBEDIT', 
+ 806      'BOOLEAN', 
+ 807      'BOTH', 
+ 808      'BUFFER', 
+ 809      'CACHE', 
+ 810      'CHAR_LENGTH', 
+ 811      'CHARACTER_LENGTH', 
+ 812      'CHECK_POINT_LEN', 
+ 813      'CHECK_POINT_LENGTH', 
+ 814      'CLOSE', 
+ 815      'COMMITTED', 
+ 816      'COMPILETIME', 
+ 817      'COMPUTED', 
+ 818      'CONDITIONAL', 
+ 819      'CONNECT', 
+ 820      'CONTAINING', 
+ 821      'CROSS', 
+ 822      'CSTRING', 
+ 823      'CURRENT_CONNECTION', 
+ 824      'CURRENT_ROLE', 
+ 825      'CURRENT_TRANSACTION', 
+ 826      'CURRENT_USER', 
+ 827      'DATABASE', 
+ 828      'DB_KEY', 
+ 829      'DEBUG', 
+ 830      'DESCENDING', 
+ 831      'DISCONNECT', 
+ 832      'DISPLAY', 
+ 833      'DO', 
+ 834      'ECHO', 
+ 835      'EDIT', 
+ 836      'ENTRY_POINT', 
+ 837      'EVENT', 
+ 838      'EXIT', 
+ 839      'EXTERN', 
+ 840      'FALSE', 
+ 841      'FETCH', 
+ 842      'FILE', 
+ 843      'FILTER', 
+ 844      'FREE_IT', 
+ 845      'FUNCTION', 
+ 846      'GDSCODE', 
+ 847      'GENERATOR', 
+ 848      'GEN_ID', 
+ 849      'GLOBAL', 
+ 850      'GROUP_COMMIT_WAIT', 
+ 851      'GROUP_COMMIT_WAIT_TIME', 
+ 852      'HELP', 
+ 853      'IF', 
+ 854      'INACTIVE', 
+ 855      'INDEX', 
+ 856      'INIT', 
+ 857      'INPUT_TYPE', 
+ 858      'INSENSITIVE', 
+ 859      'ISQL', 
+ 860      'LC_MESSAGES', 
+ 861      'LC_TYPE', 
+ 862      'LEADING', 
+ 863      'LENGTH', 
+ 864      'LEV', 
+ 865      'LOGFILE', 
+ 866      'LOG_BUFFER_SIZE', 
+ 867      'LOG_BUF_SIZE', 
+ 868      'LONG', 
+ 869      'LOWER', 
+ 870      'MANUAL', 
+ 871      'MAXIMUM', 
+ 872      'MAXIMUM_SEGMENT', 
+ 873      'MAX_SEGMENT', 
+ 874      'MERGE', 
+ 875      'MESSAGE', 
+ 876      'MINIMUM', 
+ 877      'MODULE_NAME', 
+ 878      'NOAUTO', 
+ 879      'NUM_LOG_BUFS', 
+ 880      'NUM_LOG_BUFFERS', 
+ 881      'OCTET_LENGTH', 
+ 882      'OPEN', 
+ 883      'OUTPUT_TYPE', 
+ 884      'OVERFLOW', 
+ 885      'PAGE', 
+ 886      'PAGELENGTH', 
+ 887      'PAGES', 
+ 888      'PAGE_SIZE', 
+ 889      'PARAMETER', 
+ 890  #    'PASSWORD', 
+ 891      'PLAN', 
+ 892      'POST_EVENT', 
+ 893      'QUIT', 
+ 894      'RAW_PARTITIONS', 
+ 895      'RDB$DB_KEY', 
+ 896      'RECORD_VERSION', 
+ 897      'RECREATE', 
+ 898      'RECURSIVE', 
+ 899      'RELEASE', 
+ 900      'RESERV', 
+ 901      'RESERVING', 
+ 902      'RETAIN', 
+ 903      'RETURN', 
+ 904      'RETURNING_VALUES', 
+ 905      'RETURNS', 
+ 906  #    'ROLE', 
+ 907      'ROW_COUNT', 
+ 908      'ROWS', 
+ 909      'RUNTIME', 
+ 910      'SAVEPOINT', 
+ 911      'SECOND', 
+ 912      'SENSITIVE', 
+ 913      'SHADOW', 
+ 914      'SHARED', 
+ 915      'SHELL', 
+ 916      'SHOW', 
+ 917      'SINGULAR', 
+ 918      'SNAPSHOT', 
+ 919      'SORT', 
+ 920      'STABILITY', 
+ 921      'START', 
+ 922      'STARTING', 
+ 923      'STARTS', 
+ 924      'STATEMENT', 
+ 925      'STATIC', 
+ 926      'STATISTICS', 
+ 927      'SUB_TYPE', 
+ 928      'SUSPEND', 
+ 929      'TERMINATOR', 
+ 930      'TRAILING', 
+ 931      'TRIGGER', 
+ 932      'TRIM', 
+ 933      'TRUE', 
+ 934      'TYPE', 
+ 935      'UNCOMMITTED', 
+ 936      'UNKNOWN', 
+ 937      'USING', 
+ 938      'VARIABLE', 
+ 939      'VERSION', 
+ 940      'WAIT', 
+ 941      'WEEKDAY', 
+ 942      'WHILE', 
+ 943      'YEARDAY', 
+ 944  )) 
+ 945  FIREBIRD_NONRESERVED = set(( 
+ 946      'BACKUP', 
+ 947      'BLOCK', 
+ 948      'COALESCE', 
+ 949      'COLLATION', 
+ 950      'COMMENT', 
+ 951      'DELETING', 
+ 952      'DIFFERENCE', 
+ 953      'IIF', 
+ 954      'INSERTING', 
+ 955      'LAST', 
+ 956      'LEAVE', 
+ 957      'LOCK', 
+ 958      'NEXT', 
+ 959      'NULLIF', 
+ 960      'NULLS', 
+ 961      'RESTART', 
+ 962      'RETURNING', 
+ 963      'SCALAR_ARRAY', 
+ 964      'SEQUENCE', 
+ 965      'STATEMENT', 
+ 966      'UPDATING', 
+ 967      'ABS', 
+ 968      'ACCENT', 
+ 969      'ACOS', 
+ 970      'ALWAYS', 
+ 971      'ASCII_CHAR', 
+ 972      'ASCII_VAL', 
+ 973      'ASIN', 
+ 974      'ATAN', 
+ 975      'ATAN2', 
+ 976      'BACKUP', 
+ 977      'BIN_AND', 
+ 978      'BIN_OR', 
+ 979      'BIN_SHL', 
+ 980      'BIN_SHR', 
+ 981      'BIN_XOR', 
+ 982      'BLOCK', 
+ 983      'CEIL', 
+ 984      'CEILING', 
+ 985      'COLLATION', 
+ 986      'COMMENT', 
+ 987      'COS', 
+ 988      'COSH', 
+ 989      'COT', 
+ 990      'DATEADD', 
+ 991      'DATEDIFF', 
+ 992      'DECODE', 
+ 993      'DIFFERENCE', 
+ 994      'EXP', 
+ 995      'FLOOR', 
+ 996      'GEN_UUID', 
+ 997      'GENERATED', 
+ 998      'HASH', 
+ 999      'IIF', 
+1000      'LIST', 
+1001      'LN', 
+1002      'LOG', 
+1003      'LOG10', 
+1004      'LPAD', 
+1005      'MATCHED', 
+1006      'MATCHING', 
+1007      'MAXVALUE', 
+1008      'MILLISECOND', 
+1009      'MINVALUE', 
+1010      'MOD', 
+1011      'NEXT', 
+1012      'OVERLAY', 
+1013      'PAD', 
+1014      'PI', 
+1015      'PLACING', 
+1016      'POWER', 
+1017      'PRESERVE', 
+1018      'RAND', 
+1019      'REPLACE', 
+1020      'RESTART', 
+1021      'RETURNING', 
+1022      'REVERSE', 
+1023      'ROUND', 
+1024      'RPAD', 
+1025      'SCALAR_ARRAY', 
+1026      'SEQUENCE', 
+1027      'SIGN', 
+1028      'SIN', 
+1029      'SINH', 
+1030      'SPACE', 
+1031      'SQRT', 
+1032      'TAN', 
+1033      'TANH', 
+1034      'TEMPORARY', 
+1035      'TRUNC', 
+1036      'WEEK', 
+1037  )) 
+1038   
+1039  # Thanks Jonathan Lundell 
+1040  MYSQL = set(( 
+1041      'ACCESSIBLE', 
+1042      'ADD', 
+1043      'ALL', 
+1044      'ALTER', 
+1045      'ANALYZE', 
+1046      'AND', 
+1047      'AS', 
+1048      'ASC', 
+1049      'ASENSITIVE', 
+1050      'BEFORE', 
+1051      'BETWEEN', 
+1052      'BIGINT', 
+1053      'BINARY', 
+1054      'BLOB', 
+1055      'BOTH', 
+1056      'BY', 
+1057      'CALL', 
+1058      'CASCADE', 
+1059      'CASE', 
+1060      'CHANGE', 
+1061      'CHAR', 
+1062      'CHARACTER', 
+1063      'CHECK', 
+1064      'COLLATE', 
+1065      'COLUMN', 
+1066      'CONDITION', 
+1067      'CONSTRAINT', 
+1068      'CONTINUE', 
+1069      'CONVERT', 
+1070      'CREATE', 
+1071      'CROSS', 
+1072      'CURRENT_DATE', 
+1073      'CURRENT_TIME', 
+1074      'CURRENT_TIMESTAMP', 
+1075      'CURRENT_USER', 
+1076      'CURSOR', 
+1077      'DATABASE', 
+1078      'DATABASES', 
+1079      'DAY_HOUR', 
+1080      'DAY_MICROSECOND', 
+1081      'DAY_MINUTE', 
+1082      'DAY_SECOND', 
+1083      'DEC', 
+1084      'DECIMAL', 
+1085      'DECLARE', 
+1086      'DEFAULT', 
+1087      'DELAYED', 
+1088      'DELETE', 
+1089      'DESC', 
+1090      'DESCRIBE', 
+1091      'DETERMINISTIC', 
+1092      'DISTINCT', 
+1093      'DISTINCTROW', 
+1094      'DIV', 
+1095      'DOUBLE', 
+1096      'DROP', 
+1097      'DUAL', 
+1098      'EACH', 
+1099      'ELSE', 
+1100      'ELSEIF', 
+1101      'ENCLOSED', 
+1102      'ESCAPED', 
+1103      'EXISTS', 
+1104      'EXIT', 
+1105      'EXPLAIN', 
+1106      'FALSE', 
+1107      'FETCH', 
+1108      'FLOAT', 
+1109      'FLOAT4', 
+1110      'FLOAT8', 
+1111      'FOR', 
+1112      'FORCE', 
+1113      'FOREIGN', 
+1114      'FROM', 
+1115      'FULLTEXT', 
+1116      'GRANT', 
+1117      'GROUP', 
+1118      'HAVING', 
+1119      'HIGH_PRIORITY', 
+1120      'HOUR_MICROSECOND', 
+1121      'HOUR_MINUTE', 
+1122      'HOUR_SECOND', 
+1123      'IF', 
+1124      'IGNORE', 
+1125      'IGNORE_SERVER_IDS', 
+1126      'IGNORE_SERVER_IDS', 
+1127      'IN', 
+1128      'INDEX', 
+1129      'INFILE', 
+1130      'INNER', 
+1131      'INOUT', 
+1132      'INSENSITIVE', 
+1133      'INSERT', 
+1134      'INT', 
+1135      'INT1', 
+1136      'INT2', 
+1137      'INT3', 
+1138      'INT4', 
+1139      'INT8', 
+1140      'INTEGER', 
+1141      'INTERVAL', 
+1142      'INTO', 
+1143      'IS', 
+1144      'ITERATE', 
+1145      'JOIN', 
+1146      'KEY', 
+1147      'KEYS', 
+1148      'KILL', 
+1149      'LEADING', 
+1150      'LEAVE', 
+1151      'LEFT', 
+1152      'LIKE', 
+1153      'LIMIT', 
+1154      'LINEAR', 
+1155      'LINES', 
+1156      'LOAD', 
+1157      'LOCALTIME', 
+1158      'LOCALTIMESTAMP', 
+1159      'LOCK', 
+1160      'LONG', 
+1161      'LONGBLOB', 
+1162      'LONGTEXT', 
+1163      'LOOP', 
+1164      'LOW_PRIORITY', 
+1165      'MASTER_HEARTBEAT_PERIOD', 
+1166      'MASTER_HEARTBEAT_PERIOD', 
+1167      'MASTER_SSL_VERIFY_SERVER_CERT', 
+1168      'MATCH', 
+1169      'MAXVALUE', 
+1170      'MAXVALUE', 
+1171      'MEDIUMBLOB', 
+1172      'MEDIUMINT', 
+1173      'MEDIUMTEXT', 
+1174      'MIDDLEINT', 
+1175      'MINUTE_MICROSECOND', 
+1176      'MINUTE_SECOND', 
+1177      'MOD', 
+1178      'MODIFIES', 
+1179      'NATURAL', 
+1180      'NO_WRITE_TO_BINLOG', 
+1181      'NOT', 
+1182      'NULL', 
+1183      'NUMERIC', 
+1184      'ON', 
+1185      'OPTIMIZE', 
+1186      'OPTION', 
+1187      'OPTIONALLY', 
+1188      'OR', 
+1189      'ORDER', 
+1190      'OUT', 
+1191      'OUTER', 
+1192      'OUTFILE', 
+1193      'PRECISION', 
+1194      'PRIMARY', 
+1195      'PROCEDURE', 
+1196      'PURGE', 
+1197      'RANGE', 
+1198      'READ', 
+1199      'READ_WRITE', 
+1200      'READS', 
+1201      'REAL', 
+1202      'REFERENCES', 
+1203      'REGEXP', 
+1204      'RELEASE', 
+1205      'RENAME', 
+1206      'REPEAT', 
+1207      'REPLACE', 
+1208      'REQUIRE', 
+1209      'RESIGNAL', 
+1210      'RESIGNAL', 
+1211      'RESTRICT', 
+1212      'RETURN', 
+1213      'REVOKE', 
+1214      'RIGHT', 
+1215      'RLIKE', 
+1216      'SCHEMA', 
+1217      'SCHEMAS', 
+1218      'SECOND_MICROSECOND', 
+1219      'SELECT', 
+1220      'SENSITIVE', 
+1221      'SEPARATOR', 
+1222      'SET', 
+1223      'SHOW', 
+1224      'SIGNAL', 
+1225      'SIGNAL', 
+1226      'SMALLINT', 
+1227      'SPATIAL', 
+1228      'SPECIFIC', 
+1229      'SQL', 
+1230      'SQL_BIG_RESULT', 
+1231      'SQL_CALC_FOUND_ROWS', 
+1232      'SQL_SMALL_RESULT', 
+1233      'SQLEXCEPTION', 
+1234      'SQLSTATE', 
+1235      'SQLWARNING', 
+1236      'SSL', 
+1237      'STARTING', 
+1238      'STRAIGHT_JOIN', 
+1239      'TABLE', 
+1240      'TERMINATED', 
+1241      'THEN', 
+1242      'TINYBLOB', 
+1243      'TINYINT', 
+1244      'TINYTEXT', 
+1245      'TO', 
+1246      'TRAILING', 
+1247      'TRIGGER', 
+1248      'TRUE', 
+1249      'UNDO', 
+1250      'UNION', 
+1251      'UNIQUE', 
+1252      'UNLOCK', 
+1253      'UNSIGNED', 
+1254      'UPDATE', 
+1255      'USAGE', 
+1256      'USE', 
+1257      'USING', 
+1258      'UTC_DATE', 
+1259      'UTC_TIME', 
+1260      'UTC_TIMESTAMP', 
+1261      'VALUES', 
+1262      'VARBINARY', 
+1263      'VARCHAR', 
+1264      'VARCHARACTER', 
+1265      'VARYING', 
+1266      'WHEN', 
+1267      'WHERE', 
+1268      'WHILE', 
+1269      'WITH', 
+1270      'WRITE', 
+1271      'XOR', 
+1272      'YEAR_MONTH', 
+1273      'ZEROFILL', 
+1274  )) 
+1275   
+1276  MSSQL = set(( 
+1277      'ADD', 
+1278      'ALL', 
+1279      'ALTER', 
+1280      'AND', 
+1281      'ANY', 
+1282      'AS', 
+1283      'ASC', 
+1284      'AUTHORIZATION', 
+1285      'BACKUP', 
+1286      'BEGIN', 
+1287      'BETWEEN', 
+1288      'BREAK', 
+1289      'BROWSE', 
+1290      'BULK', 
+1291      'BY', 
+1292      'CASCADE', 
+1293      'CASE', 
+1294      'CHECK', 
+1295      'CHECKPOINT', 
+1296      'CLOSE', 
+1297      'CLUSTERED', 
+1298      'COALESCE', 
+1299      'COLLATE', 
+1300      'COLUMN', 
+1301      'COMMIT', 
+1302      'COMPUTE', 
+1303      'CONSTRAINT', 
+1304      'CONTAINS', 
+1305      'CONTAINSTABLE', 
+1306      'CONTINUE', 
+1307      'CONVERT', 
+1308      'CREATE', 
+1309      'CROSS', 
+1310      'CURRENT', 
+1311      'CURRENT_DATE', 
+1312      'CURRENT_TIME', 
+1313      'CURRENT_TIMESTAMP', 
+1314      'CURRENT_USER', 
+1315      'CURSOR', 
+1316      'DATABASE', 
+1317      'DBCC', 
+1318      'DEALLOCATE', 
+1319      'DECLARE', 
+1320      'DEFAULT', 
+1321      'DELETE', 
+1322      'DENY', 
+1323      'DESC', 
+1324      'DISK', 
+1325      'DISTINCT', 
+1326      'DISTRIBUTED', 
+1327      'DOUBLE', 
+1328      'DROP', 
+1329      'DUMMY', 
+1330      'DUMP', 
+1331      'ELSE', 
+1332      'END', 
+1333      'ERRLVL', 
+1334      'ESCAPE', 
+1335      'EXCEPT', 
+1336      'EXEC', 
+1337      'EXECUTE', 
+1338      'EXISTS', 
+1339      'EXIT', 
+1340      'FETCH', 
+1341      'FILE', 
+1342      'FILLFACTOR', 
+1343      'FOR', 
+1344      'FOREIGN', 
+1345      'FREETEXT', 
+1346      'FREETEXTTABLE', 
+1347      'FROM', 
+1348      'FULL', 
+1349      'FUNCTION', 
+1350      'GOTO', 
+1351      'GRANT', 
+1352      'GROUP', 
+1353      'HAVING', 
+1354      'HOLDLOCK', 
+1355      'IDENTITY', 
+1356      'IDENTITY_INSERT', 
+1357      'IDENTITYCOL', 
+1358      'IF', 
+1359      'IN', 
+1360      'INDEX', 
+1361      'INNER', 
+1362      'INSERT', 
+1363      'INTERSECT', 
+1364      'INTO', 
+1365      'IS', 
+1366      'JOIN', 
+1367      'KEY', 
+1368      'KILL', 
+1369      'LEFT', 
+1370      'LIKE', 
+1371      'LINENO', 
+1372      'LOAD', 
+1373      'NATIONAL ', 
+1374      'NOCHECK', 
+1375      'NONCLUSTERED', 
+1376      'NOT', 
+1377      'NULL', 
+1378      'NULLIF', 
+1379      'OF', 
+1380      'OFF', 
+1381      'OFFSETS', 
+1382      'ON', 
+1383      'OPEN', 
+1384      'OPENDATASOURCE', 
+1385      'OPENQUERY', 
+1386      'OPENROWSET', 
+1387      'OPENXML', 
+1388      'OPTION', 
+1389      'OR', 
+1390      'ORDER', 
+1391      'OUTER', 
+1392      'OVER', 
+1393      'PERCENT', 
+1394      'PLAN', 
+1395      'PRECISION', 
+1396      'PRIMARY', 
+1397      'PRINT', 
+1398      'PROC', 
+1399      'PROCEDURE', 
+1400      'PUBLIC', 
+1401      'RAISERROR', 
+1402      'READ', 
+1403      'READTEXT', 
+1404      'RECONFIGURE', 
+1405      'REFERENCES', 
+1406      'REPLICATION', 
+1407      'RESTORE', 
+1408      'RESTRICT', 
+1409      'RETURN', 
+1410      'REVOKE', 
+1411      'RIGHT', 
+1412      'ROLLBACK', 
+1413      'ROWCOUNT', 
+1414      'ROWGUIDCOL', 
+1415      'RULE', 
+1416      'SAVE', 
+1417      'SCHEMA', 
+1418      'SELECT', 
+1419      'SESSION_USER', 
+1420      'SET', 
+1421      'SETUSER', 
+1422      'SHUTDOWN', 
+1423      'SOME', 
+1424      'STATISTICS', 
+1425      'SYSTEM_USER', 
+1426      'TABLE', 
+1427      'TEXTSIZE', 
+1428      'THEN', 
+1429      'TO', 
+1430      'TOP', 
+1431      'TRAN', 
+1432      'TRANSACTION', 
+1433      'TRIGGER', 
+1434      'TRUNCATE', 
+1435      'TSEQUAL', 
+1436      'UNION', 
+1437      'UNIQUE', 
+1438      'UPDATE', 
+1439      'UPDATETEXT', 
+1440      'USE', 
+1441      'USER', 
+1442      'VALUES', 
+1443      'VARYING', 
+1444      'VIEW', 
+1445      'WAITFOR', 
+1446      'WHEN', 
+1447      'WHERE', 
+1448      'WHILE', 
+1449      'WITH', 
+1450      'WRITETEXT', 
+1451  )) 
+1452   
+1453  ORACLE = set(( 
+1454      'ACCESS', 
+1455      'ADD', 
+1456      'ALL', 
+1457      'ALTER', 
+1458      'AND', 
+1459      'ANY', 
+1460      'AS', 
+1461      'ASC', 
+1462      'AUDIT', 
+1463      'BETWEEN', 
+1464      'BY', 
+1465      'CHAR', 
+1466      'CHECK', 
+1467      'CLUSTER', 
+1468      'COLUMN', 
+1469      'COMMENT', 
+1470      'COMPRESS', 
+1471      'CONNECT', 
+1472      'CREATE', 
+1473      'CURRENT', 
+1474      'DATE', 
+1475      'DECIMAL', 
+1476      'DEFAULT', 
+1477      'DELETE', 
+1478      'DESC', 
+1479      'DISTINCT', 
+1480      'DROP', 
+1481      'ELSE', 
+1482      'EXCLUSIVE', 
+1483      'EXISTS', 
+1484      'FILE', 
+1485      'FLOAT', 
+1486      'FOR', 
+1487      'FROM', 
+1488      'GRANT', 
+1489      'GROUP', 
+1490      'HAVING', 
+1491      'IDENTIFIED', 
+1492      'IMMEDIATE', 
+1493      'IN', 
+1494      'INCREMENT', 
+1495      'INDEX', 
+1496      'INITIAL', 
+1497      'INSERT', 
+1498      'INTEGER', 
+1499      'INTERSECT', 
+1500      'INTO', 
+1501      'IS', 
+1502      'LEVEL', 
+1503      'LIKE', 
+1504      'LOCK', 
+1505      'LONG', 
+1506      'MAXEXTENTS', 
+1507      'MINUS', 
+1508      'MLSLABEL', 
+1509      'MODE', 
+1510      'MODIFY', 
+1511      'NOAUDIT', 
+1512      'NOCOMPRESS', 
+1513      'NOT', 
+1514      'NOWAIT', 
+1515      'NULL', 
+1516      'NUMBER', 
+1517      'OF', 
+1518      'OFFLINE', 
+1519      'ON', 
+1520      'ONLINE', 
+1521      'OPTION', 
+1522      'OR', 
+1523      'ORDER', 
+1524      'PCTFREE', 
+1525      'PRIOR', 
+1526      'PRIVILEGES', 
+1527      'PUBLIC', 
+1528      'RAW', 
+1529      'RENAME', 
+1530      'RESOURCE', 
+1531      'REVOKE', 
+1532      'ROW', 
+1533      'ROWID', 
+1534      'ROWNUM', 
+1535      'ROWS', 
+1536      'SELECT', 
+1537      'SESSION', 
+1538      'SET', 
+1539      'SHARE', 
+1540      'SIZE', 
+1541      'SMALLINT', 
+1542      'START', 
+1543      'SUCCESSFUL', 
+1544      'SYNONYM', 
+1545      'SYSDATE', 
+1546      'TABLE', 
+1547      'THEN', 
+1548      'TO', 
+1549      'TRIGGER', 
+1550      'UID', 
+1551      'UNION', 
+1552      'UNIQUE', 
+1553      'UPDATE', 
+1554      'USER', 
+1555      'VALIDATE', 
+1556      'VALUES', 
+1557      'VARCHAR', 
+1558      'VARCHAR2', 
+1559      'VIEW', 
+1560      'WHENEVER', 
+1561      'WHERE', 
+1562      'WITH', 
+1563  )) 
+1564   
+1565  SQLITE = set(( 
+1566      'ABORT', 
+1567      'ACTION', 
+1568      'ADD', 
+1569      'AFTER', 
+1570      'ALL', 
+1571      'ALTER', 
+1572      'ANALYZE', 
+1573      'AND', 
+1574      'AS', 
+1575      'ASC', 
+1576      'ATTACH', 
+1577      'AUTOINCREMENT', 
+1578      'BEFORE', 
+1579      'BEGIN', 
+1580      'BETWEEN', 
+1581      'BY', 
+1582      'CASCADE', 
+1583      'CASE', 
+1584      'CAST', 
+1585      'CHECK', 
+1586      'COLLATE', 
+1587      'COLUMN', 
+1588      'COMMIT', 
+1589      'CONFLICT', 
+1590      'CONSTRAINT', 
+1591      'CREATE', 
+1592      'CROSS', 
+1593      'CURRENT_DATE', 
+1594      'CURRENT_TIME', 
+1595      'CURRENT_TIMESTAMP', 
+1596      'DATABASE', 
+1597      'DEFAULT', 
+1598      'DEFERRABLE', 
+1599      'DEFERRED', 
+1600      'DELETE', 
+1601      'DESC', 
+1602      'DETACH', 
+1603      'DISTINCT', 
+1604      'DROP', 
+1605      'EACH', 
+1606      'ELSE', 
+1607      'END', 
+1608      'ESCAPE', 
+1609      'EXCEPT', 
+1610      'EXCLUSIVE', 
+1611      'EXISTS', 
+1612      'EXPLAIN', 
+1613      'FAIL', 
+1614      'FOR', 
+1615      'FOREIGN', 
+1616      'FROM', 
+1617      'FULL', 
+1618      'GLOB', 
+1619      'GROUP', 
+1620      'HAVING', 
+1621      'IF', 
+1622      'IGNORE', 
+1623      'IMMEDIATE', 
+1624      'IN', 
+1625      'INDEX', 
+1626      'INDEXED', 
+1627      'INITIALLY', 
+1628      'INNER', 
+1629      'INSERT', 
+1630      'INSTEAD', 
+1631      'INTERSECT', 
+1632      'INTO', 
+1633      'IS', 
+1634      'ISNULL', 
+1635      'JOIN', 
+1636      'KEY', 
+1637      'LEFT', 
+1638      'LIKE', 
+1639      'LIMIT', 
+1640      'MATCH', 
+1641      'NATURAL', 
+1642      'NO', 
+1643      'NOT', 
+1644      'NOTNULL', 
+1645      'NULL', 
+1646      'OF', 
+1647      'OFFSET', 
+1648      'ON', 
+1649      'OR', 
+1650      'ORDER', 
+1651      'OUTER', 
+1652      'PLAN', 
+1653      'PRAGMA', 
+1654      'PRIMARY', 
+1655      'QUERY', 
+1656      'RAISE', 
+1657      'REFERENCES', 
+1658      'REGEXP', 
+1659      'REINDEX', 
+1660      'RELEASE', 
+1661      'RENAME', 
+1662      'REPLACE', 
+1663      'RESTRICT', 
+1664      'RIGHT', 
+1665      'ROLLBACK', 
+1666      'ROW', 
+1667      'SAVEPOINT', 
+1668      'SELECT', 
+1669      'SET', 
+1670      'TABLE', 
+1671      'TEMP', 
+1672      'TEMPORARY', 
+1673      'THEN', 
+1674      'TO', 
+1675      'TRANSACTION', 
+1676      'TRIGGER', 
+1677      'UNION', 
+1678      'UNIQUE', 
+1679      'UPDATE', 
+1680      'USING', 
+1681      'VACUUM', 
+1682      'VALUES', 
+1683      'VIEW', 
+1684      'VIRTUAL', 
+1685      'WHEN', 
+1686      'WHERE', 
+1687  )) 
+1688   
+1689  # remove from here when you add a list. 
+1690  JDBCSQLITE = SQLITE 
+1691  DB2 = INFORMIX = INGRES = JDBCPOSTGRESQL = COMMON 
+1692   
+1693  ADAPTERS = { 
+1694      'sqlite': SQLITE, 
+1695      'mysql': MYSQL, 
+1696      'postgres': POSTGRESQL, 
+1697      'postgres_nonreserved': POSTGRESQL_NONRESERVED, 
+1698      'oracle': ORACLE, 
+1699      'mssql': MSSQL, 
+1700      'mssql2': MSSQL, 
+1701      'db2': DB2, 
+1702      'informix': INFORMIX, 
+1703      'firebird': FIREBIRD, 
+1704      'firebird_embedded': FIREBIRD, 
+1705      'firebird_nonreserved': FIREBIRD_NONRESERVED, 
+1706      'ingres': INGRES, 
+1707      'ingresu': INGRES, 
+1708      'jdbc:sqlite': JDBCSQLITE, 
+1709      'jdbc:postgres': JDBCPOSTGRESQL, 
+1710      'common': COMMON, 
+1711  } 
+1712   
+1713  ADAPTERS['all'] = reduce(lambda a,b:a.union(b),(x for x in ADAPTERS.values())) 
+1714   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:04 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.restricted-module.html
Index: applications/examples/static/epydoc/web2py.gluon.restricted-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.restricted-module.html
@@ -0,0 +1,300 @@
+
+
+
+
+  web2py.gluon.restricted
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module restricted
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module restricted
    source code

    
+This file is part of the web2py Web Framework Copyrighted by Massimo 
+  Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        TicketStorage
    
+      defines the ticket object and the default values of its members 
+        (None)
+    
    
+       
+    
+        RestrictedError
    
+      class used to wrap an exception that occurs in the restricted 
+        environment below.
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    compile2(code,
+        layer)
    
+      The +'
+' is necessary else compile fails when code ends in a comment.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    restricted(code,
+        environment={},
+        layer='Unknown')
    
+      runs code in environment and returns the output.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    snapshot(info=1,
+        context=5,
+        code=1,
+        environment=1)
    
+      Return a dict describing a given traceback (based on 
+      cgitb.text).    		
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        logger = logging.getLogger("web2py")
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Function Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    restricted(code,
+        environment={},
+        layer='Unknown')
+  
    
+      		source code 
+    
    
+  
+  runs code in environment and returns the output. if an exception 
+  occurs in code it raises a RestrictedError containing the traceback. 
+  layer is passed to RestrictedError to identify where the error 
+  occurred.
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.restricted-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.restricted-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.restricted-pysrc.html
@@ -0,0 +1,541 @@
+
+
+
+
+  web2py.gluon.restricted
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module restricted
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.restricted
    
+
    +  1  #!/usr/bin/env python 
+  2  # -*- coding: utf-8 -*- 
+  3   
+  4  """ 
+  5  This file is part of the web2py Web Framework 
+  6  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+  7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+  8  """ 
+  9   
+ 10  import sys 
+ 11  import cPickle 
+ 12  import traceback 
+ 13  import types 
+ 14  import os 
+ 15  import datetime 
+ 16  import logging 
+ 17   
+ 18  from utils import web2py_uuid 
+ 19  from storage import Storage 
+ 20  from http import HTTP 
+ 21  from html import BEAUTIFY 
+ 22   
+ 23  logger = logging.getLogger("web2py") 
+ 24   
+ 25  __all__ = ['RestrictedError', 'restricted', 'TicketStorage', 'compile2'] 
+ 26   
+
     27 -class TicketStorage(Storage): 
+
     28   
+ 29      """ 
+ 30      defines the ticket object and the default values of its members (None) 
+ 31      """ 
+ 32   
+
     33 -    def __init__( 
+ 34          self, 
+ 35          db=None, 
+ 36          tablename='web2py_ticket' 
+ 37          ): 
+
     38          self.db = db 
+ 39          self.tablename = tablename 
+
     40   
+
     41 -    def store(self, request, ticket_id, ticket_data): 
+
     42          """ 
+ 43          stores the ticket. It will figure out if this must be on disk or in db 
+ 44          """ 
+ 45          if self.db: 
+ 46              self._store_in_db(request, ticket_id, ticket_data) 
+ 47          else: 
+ 48              self._store_on_disk(request, ticket_id, ticket_data) 
+
     49   
+
     50 -    def _store_in_db(self, request, ticket_id, ticket_data): 
+
     51          table = self._get_table(self.db, self.tablename, request.application) 
+ 52          table.insert(ticket_id=ticket_id, 
+ 53                       ticket_data=cPickle.dumps(ticket_data), 
+ 54                       created_datetime=request.now) 
+ 55          logger.error('In FILE: %(layer)s\n\n%(traceback)s\n' % ticket_data) 
+
     56   
+
     57 -    def _store_on_disk(self, request, ticket_id, ticket_data): 
+
     58          ef = self._error_file(request, ticket_id, 'wb') 
+ 59          try: 
+ 60              cPickle.dump(ticket_data, ef) 
+ 61          finally: 
+ 62              ef.close() 
+
     63   
+
     64 -    def _error_file(self, request, ticket_id, mode, app=None): 
+
     65          root = request.folder 
+ 66          if app: 
+ 67              root = os.path.join(os.path.join(root, '..'), app) 
+ 68          errors_folder = os.path.abspath(os.path.join(root, 'errors'))#.replace('\\', '/') 
+ 69          return open(os.path.join(errors_folder, ticket_id), mode) 
+
     70   
+
     71 -    def _get_table(self, db, tablename, app): 
+
     72          tablename = tablename + '_' + app 
+ 73          table = db.get(tablename, None) 
+ 74          if table is None: 
+ 75              db.rollback()   # not necessary but one day 
+ 76                              # any app may store tickets on DB 
+ 77              table = db.define_table( 
+ 78                  tablename, 
+ 79                  db.Field('ticket_id', length=100), 
+ 80                  db.Field('ticket_data', 'text'), 
+ 81                  db.Field('created_datetime', 'datetime'), 
+ 82                  ) 
+ 83          return table 
+
     84   
+
     85 -    def load( 
+ 86          self, 
+ 87          request, 
+ 88          app, 
+ 89          ticket_id, 
+ 90          ): 
+
     91          if not self.db: 
+ 92              ef = self._error_file(request, ticket_id, 'rb', app) 
+ 93              try: 
+ 94                  return cPickle.load(ef) 
+ 95              finally: 
+ 96                  ef.close() 
+ 97          table = self._get_table(self.db, self.tablename, app) 
+ 98          rows = self.db(table.ticket_id == ticket_id).select() 
+ 99          if rows: 
+100              return cPickle.loads(rows[0].ticket_data) 
+101          return None 
+
    102   
+103   
+
    104 -class RestrictedError(Exception): 
+
    105      """ 
+106      class used to wrap an exception that occurs in the restricted environment 
+107      below. the traceback is used to log the exception and generate a ticket. 
+108      """ 
+109   
+
    110 -    def __init__( 
+111          self, 
+112          layer='', 
+113          code='', 
+114          output='', 
+115          environment={}, 
+116          ): 
+
    117          """ 
+118          layer here is some description of where in the system the exception 
+119          occurred. 
+120          """ 
+121   
+122          self.layer = layer 
+123          self.code = code 
+124          self.output = output 
+125          if layer: 
+126              try: 
+127                  self.traceback = traceback.format_exc() 
+128              except: 
+129                  self.traceback = 'no traceback because template parting error' 
+130              try: 
+131                  self.snapshot = snapshot(context=10,code=code,environment=environment) 
+132              except: 
+133                  self.snapshot = {} 
+134          else: 
+135              self.traceback = '(no error)' 
+136              self.snapshot = {} 
+137          self.environment = environment 
+
    138   
+
    139 -    def log(self, request): 
+
    140          """ 
+141          logs the exception. 
+142          """ 
+143   
+144          try: 
+145              d = { 
+146                  'layer': str(self.layer), 
+147                  'code': str(self.code), 
+148                  'output': str(self.output), 
+149                  'traceback': str(self.traceback), 
+150                  'snapshot': self.snapshot, 
+151                  } 
+152              ticket_storage = TicketStorage(db=request.tickets_db) 
+153              ticket_storage.store(request, request.uuid.split('/',1)[1], d) 
+154              return request.uuid 
+155          except: 
+156              logger.error(self.traceback) 
+157              return None 
+
    158   
+159   
+
    160 -    def load(self, request, app, ticket_id): 
+
    161          """ 
+162          loads a logged exception. 
+163          """ 
+164          ticket_storage = TicketStorage(db=request.tickets_db) 
+165          d = ticket_storage.load(request, app, ticket_id) 
+166   
+167          self.layer = d['layer'] 
+168          self.code = d['code'] 
+169          self.output = d['output'] 
+170          self.traceback = d['traceback'] 
+171          self.snapshot = d.get('snapshot') 
+
    172   
+173   
+
    174 -def compile2(code,layer): 
+
    175      """ 
+176      The +'\n' is necessary else compile fails when code ends in a comment. 
+177      """ 
+178      return compile(code.rstrip().replace('\r\n','\n')+'\n', layer, 'exec') 
+
    179   
+
    180 -def restricted(code, environment={}, layer='Unknown'): 
+
    181      """ 
+182      runs code in environment and returns the output. if an exception occurs 
+183      in code it raises a RestrictedError containing the traceback. layer is 
+184      passed to RestrictedError to identify where the error occurred. 
+185      """ 
+186      environment['__file__'] = layer 
+187      try: 
+188          if type(code) == types.CodeType: 
+189              ccode = code 
+190          else: 
+191              ccode = compile2(code,layer) 
+192          exec ccode in environment 
+193      except HTTP: 
+194          raise 
+195      except Exception, error: 
+196          # XXX Show exception in Wing IDE if running in debugger 
+197          if __debug__ and 'WINGDB_ACTIVE' in os.environ: 
+198              etype, evalue, tb = sys.exc_info() 
+199              sys.excepthook(etype, evalue, tb) 
+200          raise RestrictedError(layer, code, '', environment) 
+
    201   
+
    202 -def snapshot(info=None, context=5, code=None, environment=None): 
+
    203      """Return a dict describing a given traceback (based on cgitb.text).""" 
+204      import os, types, time, traceback, linecache, inspect, pydoc, cgitb 
+205   
+206      # if no exception info given, get current: 
+207      etype, evalue, etb = info or sys.exc_info() 
+208   
+209      if type(etype) is types.ClassType: 
+210          etype = etype.__name__ 
+211   
+212      # create a snapshot dict with some basic information 
+213      s = {} 
+214      s['pyver'] = 'Python ' + sys.version.split()[0] + ': ' + sys.executable 
+215      s['date'] = time.ctime(time.time()) 
+216   
+217      # start to process frames 
+218      records = inspect.getinnerframes(etb, context) 
+219      s['frames'] = [] 
+220      for frame, file, lnum, func, lines, index in records: 
+221          file = file and os.path.abspath(file) or '?' 
+222          args, varargs, varkw, locals = inspect.getargvalues(frame) 
+223          call = '' 
+224          if func != '?': 
+225              call = inspect.formatargvalues(args, varargs, varkw, locals, 
+226                      formatvalue=lambda value: '=' + pydoc.text.repr(value)) 
+227   
+228          # basic frame information 
+229          f = {'file': file, 'func': func, 'call': call, 'lines': {}, 'lnum': lnum} 
+230   
+231          highlight = {} 
+232          def reader(lnum=[lnum]): 
+233              highlight[lnum[0]] = 1 
+234              try: return linecache.getline(file, lnum[0]) 
+235              finally: lnum[0] += 1 
+
    236          vars = cgitb.scanvars(reader, frame, locals) 
+237   
+238          # if it is a view, replace with generated code 
+239          if file.endswith('html'): 
+240              lmin = lnum>context and (lnum-context) or 0 
+241              lmax = lnum+context 
+242              lines = code.split("\n")[lmin:lmax] 
+243              index = min(context, lnum) - 1 
+244   
+245          if index is not None: 
+246              i = lnum - index 
+247              for line in lines: 
+248                  f['lines'][i] = line.rstrip() 
+249                  i += 1 
+250   
+251          # dump local variables (referenced in current line only) 
+252          f['dump'] = {} 
+253          for name, where, value in vars: 
+254              if name in f['dump']: continue 
+255              if value is not cgitb.__UNDEF__: 
+256                  if where == 'global': name = 'global ' + name 
+257                  elif where != 'local': name = where + name.split('.')[-1] 
+258                  f['dump'][name] = pydoc.text.repr(value) 
+259              else: 
+260                  f['dump'][name] = 'undefined' 
+261   
+262          s['frames'].append(f) 
+263   
+264      # add exception type, value and attributes 
+265      s['etype'] = str(etype) 
+266      s['evalue'] = str(evalue) 
+267      s['exception'] = {} 
+268      if isinstance(evalue, BaseException): 
+269          for name in dir(evalue): 
+270              # prevent py26 DeprecatedWarning: 
+271              if name!='message' or sys.version_info<(2.6): 
+272                  value = pydoc.text.repr(getattr(evalue, name)) 
+273                  s['exception'][name] = value 
+274   
+275      # add all local values (of last frame) to the snapshot 
+276      s['locals'] = {} 
+277      for name, value in locals.items(): 
+278          s['locals'][name] = pydoc.text.repr(value) 
+279   
+280      # add web2py environment variables 
+281      for k,v in environment.items(): 
+282          if k in ('request', 'response', 'session'): 
+283              s[k] = BEAUTIFY(v) 
+284   
+285      return s 
+286   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.restricted.RestrictedError-class.html
Index: applications/examples/static/epydoc/web2py.gluon.restricted.RestrictedError-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.restricted.RestrictedError-class.html
@@ -0,0 +1,307 @@
+
+
+
+
+  web2py.gluon.restricted.RestrictedError
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module restricted ::
+        Class RestrictedError
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class RestrictedError
    source code

    
+
    +              object --+        
+                       |        
+exceptions.BaseException --+    
+                           |    
+        exceptions.Exception --+
+                               |
+                              RestrictedError
+
    
+
+
    
+class used to wrap an exception that occurs in the restricted 
+  environment below. the traceback is used to log the exception and 
+  generate a ticket.

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        layer='',
+        code='',
+        output='',
+        environment={})
    
+      layer here is some description of where in the system the 
+      exception occurred.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    log(self,
+        request)
    
+      logs the exception.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    load(self,
+        request,
+        app,
+        ticket_id)
    
+      loads a logged exception.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from exceptions.Exception:
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        layer='',
+        code='',
+        output='',
+        environment={})
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  layer here is some description of where in the system the exception 
+  occurred.
+  
    
+    
    Overrides:
+      exceptions.Exception.__init__
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.restricted.TicketStorage-class.html
Index: applications/examples/static/epydoc/web2py.gluon.restricted.TicketStorage-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.restricted.TicketStorage-class.html
@@ -0,0 +1,436 @@
+
+
+
+
+  web2py.gluon.restricted.TicketStorage
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module restricted ::
+        Class TicketStorage
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class TicketStorage
    source code

    
+
    + object --+        
+          |        
+       dict --+    
+              |    
+storage.Storage --+
+                  |
+                 TicketStorage
+
    
+
+
    
+defines the ticket object and the default values of its members 
+  (None)

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        db=1,
+        tablename='web2py_ticket')
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    store(self,
+        request,
+        ticket_id,
+        ticket_data)
    
+      stores the ticket.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _store_in_db(self,
+        request,
+        ticket_id,
+        ticket_data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _store_on_disk(self,
+        request,
+        ticket_id,
+        ticket_data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _error_file(self,
+        request,
+        ticket_id,
+        mode,
+        app=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _get_table(self,
+        db,
+        tablename,
+        app)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    load(self,
+        request,
+        app,
+        ticket_id)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from storage.Storage:
+      __delattr__,
+      __getattr__,
+      __getstate__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      getfirst,
+      getlast,
+      getlist
+      
    
+    
    Inherited from dict:
+      __cmp__,
+      __contains__,
+      __delitem__,
+      __eq__,
+      __ge__,
+      __getattribute__,
+      __getitem__,
+      __gt__,
+      __hash__,
+      __iter__,
+      __le__,
+      __len__,
+      __lt__,
+      __ne__,
+      __new__,
+      __setitem__,
+      clear,
+      copy,
+      fromkeys,
+      get,
+      has_key,
+      items,
+      iteritems,
+      iterkeys,
+      itervalues,
+      keys,
+      pop,
+      popitem,
+      setdefault,
+      update,
+      values
+      
    
+    
    Inherited from object:
+      __reduce__,
+      __reduce_ex__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        db=1,
+        tablename='web2py_ticket')
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Returns:
    
+        
    +new empty dictionary
+
+
    
+    
    Overrides:
+      dict.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    store(self,
+        request,
+        ticket_id,
+        ticket_data)
+  
    
+      		source code 
+    
    
+  
+  stores the ticket. It will figure out if this must be on disk or in 
+  db
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.rewrite-module.html
Index: applications/examples/static/epydoc/web2py.gluon.rewrite-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.rewrite-module.html
@@ -0,0 +1,915 @@
+
+
+
+
+  web2py.gluon.rewrite
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module rewrite
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module rewrite
    source code

    
+
    This file is part of the web2py Web Framework Copyrighted by Massimo 
+  Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)
    
+  
    gluon.rewrite parses incoming URLs and formats outgoing URLs for 
+  gluon.html.URL.
    
+  
    In addition, it rewrites both incoming and outgoing URLs based on the 
+  (optional) user-supplied routes.py, which also allows for rewriting of 
+  certain error messages.
    
+  routes.py supports two styles of URL rewriting, depending on whether 
+  'routers' is defined. Refer to router.example.py and routes.example.py 
+  for additional documentation.

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        MapUrlIn
    
+      logic for mapping incoming URLs
+    
    
+       
+    
+        MapUrlOut
    
+      logic for mapping outgoing URLs
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    _router_default()
    
+      return new copy of default base router    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _params_default(app=1)
    
+      return new copy of default parameters    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    url_in(request,
+        environ)
    
+      parse and rewrite incoming URL    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    url_out(request,
+        env,
+        application,
+        controller,
+        function,
+        args,
+        other,
+        scheme,
+        host,
+        port)
    
+      assemble and rewrite outgoing URL    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    try_rewrite_on_error(http_response,
+        request,
+        environ,
+        ticket=1)
    
+      called from main.wsgibase to rewrite the http response.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    try_redirect_on_error(http_object,
+        request,
+        ticket=1)
    
+      called from main.wsgibase to rewrite the http response    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    load(routes='routes.py',
+        app=1,
+        data=1,
+        rdict=1)
    
+      load: read (if file) and parse routes store results in params 
+      (called from main.py at web2py initialization time) If data is 
+      present, it's used instead of the routes.py contents.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    compile_regex(k,
+        v)
    
+      Preprocess and compile the regular expressions in routes_app/in/out
+
+The resulting regex will match a pattern of the form:
+
+    [remote address]:[protocol]://[host]:[method] [path]
+
+We allow abbreviated regexes on input; here we try to complete them.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    load_routers(all_apps)
    
+      load-time post-processing of routers    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    regex_uri(e,
+        regexes,
+        tag,
+        default=1)
    
+      filter incoming URI against a list of regexes    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    regex_select(env=1,
+        app=1,
+        request=1)
    
+      select a set of regex rewrite params for the current request    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    regex_filter_in(e)
    
+      regex rewrite incoming URL    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    regex_url_in(request,
+        environ)
    
+      rewrite and parse incoming URL    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    regex_filter_out(url,
+        e=1)
    
+      regex rewrite outgoing URL    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    filter_url(url,
+        method='get',
+        remote='0.0.0.0',
+        out=True,
+        app=True,
+        lang=1,
+        domain=(None, None),
+        env=True,
+        scheme=1,
+        host=1,
+        port=1)
    
+      doctest/unittest interface to regex_filter_in() and 
+      regex_filter_out()    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    filter_err(status,
+        application='app',
+        ticket='tkt')
    
+      doctest/unittest interface to routes_onerror    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    map_url_in(request,
+        env,
+        app=True)
    
+      route incoming URL    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    map_url_out(request,
+        env,
+        application,
+        controller,
+        function,
+        args,
+        other,
+        scheme,
+        host,
+        port)
    
+      supply /a/c/f (or /a/lang/c/f) portion of outgoing url
+
+The basic rule is that we can only make transformations
+that map_url_in can reverse.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    get_effective_router(appname)
    
+      return a private copy of the effective router for the specified 
+      application    		
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        logger = logging.getLogger('web2py.rewrite')
+    
    
+       
+    
+        thread = threading.local()
+    
    
+       
+    
+        params_apps = {}
+    
    
+       
+    
+        params = <Storage {'routes_out': [], 'name': 'BASE', 'routes_a...
+    
    
+       
+    
+        routers = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        ROUTER_KEYS = set(['acfe_match', 'applications', 'args_match',...
+    
    
+       
+    
+        ROUTER_BASE_KEYS = set(['applications', 'default_application',...
+    
    
+       
+    
+        regex_at = re.compile(r'(?<!\\)\$[a-zA-Z]\w*')
+    
    
+       
+    
+        regex_anything = re.compile(r'(?<!\\)\$anything')
+    
    
+       
+    
+        regex_space = re.compile(r'(\+|\s|%20)+')
+    
    
+       
+    
+        regex_static = re.compile(r'(?x)(^/(?P<b>\w+)/static/(?P<x>(\w...
+    
    
+       
+    
+        regex_url = re.compile(r'(?x)(^(/(?P<a>[\w\s\+]+)(/(?P<c>[\w\s...
+    
    
+       
+    
+        regex_args = re.compile(r'(?x)(^(?P<s>([\w@/-][=\.]?)*)?/?$)')
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Function Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    load(routes='routes.py',
+        app=1,
+        data=1,
+        rdict=1)
+  
    
+      		source code 
+    
    
+  
+  load: read (if file) and parse routes store results in params (called 
+  from main.py at web2py initialization time) If data is present, it's used
+  instead of the routes.py contents. If rdict is present, it must be a dict
+  to be used for routers (unit test)
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    map_url_out(request,
+        env,
+        application,
+        controller,
+        function,
+        args,
+        other,
+        scheme,
+        host,
+        port)
+  
    
+      		source code 
+    
    
+  
+  
    +
+supply /a/c/f (or /a/lang/c/f) portion of outgoing url
+
+The basic rule is that we can only make transformations
+that map_url_in can reverse.
+
+Suppose that the incoming arguments are a,c,f,args,lang
+and that the router defaults are da, dc, df, dl.
+
+We can perform these transformations trivially if args=[] and lang=None or dl:
+
+/da/dc/df => /
+/a/dc/df => /a
+/a/c/df => /a/c
+
+We would also like to be able to strip the default application or application/controller
+from URLs with function/args present, thus:
+
+    /da/c/f/args  => /c/f/args
+    /da/dc/f/args => /f/args
+
+We use [applications] and [controllers] and [functions] to suppress ambiguous omissions.
+
+We assume that language names do not collide with a/c/f names.
+
+
    
+  
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Variables Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    params
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +<Storage {'routes_out': [], 'name': 'BASE', 'routes_apps_raw': [], 'er\
+ror_message': '<html><body><h1>%s</h1></body></html>', 'default_functi\
+on': 'index', 'default_controller': 'default', 'routes_app': [], 'rout\
+es_in': [], 'default_application': 'init', 'error_message_ticket': '<h\
+tml><body><h1>Internal error</h1>Ticket issued: <a href="/admin/defaul\
+t/ticket/%(ticket)s" target="_blank">%(ticket)s</a></body><!-- this is\
+ junk text else IE does not display the page: xxxxxxxxxxxxxxxxxxxxxxxx\
+xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx\
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    ROUTER_KEYS
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +set(['acfe_match',
+     'applications',
+     'args_match',
+     'controllers',
+     'default_application',
+     'default_controller',
+     'default_function',
+     'default_language',
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    ROUTER_BASE_KEYS
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +set(['applications', 'default_application', 'domains', 'path_prefix'])
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    regex_static
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +re.compile(r'(?x)(^/(?P<b>\w+)/static/(?P<x>(\w[-=\./]?)*)$)')
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    regex_url
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +re.compile(r'(?x)(^(/(?P<a>[\w\s\+]+)(/(?P<c>[\w\s\+]+)(/(?P<f>[\w\s\+\
+]+)(\.(?P<e>[\w\s\+]+))?(/(?P<r>.*))?)?)?)?/?$)')
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.rewrite-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.rewrite-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.rewrite-pysrc.html
@@ -0,0 +1,1746 @@
+
+
+
+
+  web2py.gluon.rewrite
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module rewrite
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.rewrite
    
+
    +   1  #!/bin/env python 
+   2  # -*- coding: utf-8 -*- 
+   3   
+   4  """ 
+   5  This file is part of the web2py Web Framework 
+   6  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+   7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+   8   
+   9  gluon.rewrite parses incoming URLs and formats outgoing URLs for gluon.html.URL. 
+  10   
+  11  In addition, it rewrites both incoming and outgoing URLs based on the (optional) user-supplied routes.py, 
+  12  which also allows for rewriting of certain error messages. 
+  13   
+  14  routes.py supports two styles of URL rewriting, depending on whether 'routers' is defined. 
+  15  Refer to router.example.py and routes.example.py for additional documentation. 
+  16   
+  17  """ 
+  18   
+  19  import os 
+  20  import re 
+  21  import logging 
+  22  import traceback 
+  23  import threading 
+  24  import urllib 
+  25  from storage import Storage, List 
+  26  from http import HTTP 
+  27  from fileutils import abspath, read_file 
+  28  from settings import global_settings 
+  29   
+  30  logger = logging.getLogger('web2py.rewrite') 
+  31   
+  32  thread = threading.local()  # thread-local storage for routing parameters 
+  33   
+
      34 -def _router_default(): 
+
      35      "return new copy of default base router" 
+  36      router = Storage( 
+  37          default_application = 'init', 
+  38              applications = 'ALL', 
+  39          default_controller = 'default', 
+  40              controllers = 'DEFAULT', 
+  41          default_function = 'index', 
+  42              functions = None, 
+  43          default_language = None, 
+  44              languages = None, 
+  45          root_static = ['favicon.ico', 'robots.txt'], 
+  46          domains = None, 
+  47          exclusive_domain = False, 
+  48          map_hyphen = False, 
+  49          acfe_match = r'\w+$',              # legal app/ctlr/fcn/ext 
+  50          file_match = r'(\w+[-=./]?)+$',    # legal file (path) name 
+  51          args_match = r'([\w@ -]+[=.]?)*$', # legal arg in args 
+  52      ) 
+  53      return router 
+
      54   
+
      55 -def _params_default(app=None): 
+
      56      "return new copy of default parameters" 
+  57      p = Storage() 
+  58      p.name = app or "BASE" 
+  59      p.default_application = app or "init" 
+  60      p.default_controller = "default" 
+  61      p.default_function = "index" 
+  62      p.routes_app = [] 
+  63      p.routes_in = [] 
+  64      p.routes_out = [] 
+  65      p.routes_onerror = [] 
+  66      p.routes_apps_raw = [] 
+  67      p.error_handler = None 
+  68      p.error_message = '<html><body><h1>%s</h1></body></html>' 
+  69      p.error_message_ticket = \ 
+  70          '<html><body><h1>Internal error</h1>Ticket issued: <a href="/admin/default/ticket/%(ticket)s" target="_blank">%(ticket)s</a></body><!-- this is junk text else IE does not display the page: '+('x'*512)+' //--></html>' 
+  71      p.routers = None 
+  72      return p 
+
      73   
+  74  params_apps = dict() 
+  75  params = _params_default(app=None)  # regex rewrite parameters 
+  76  thread.routes = params              # default to base regex rewrite parameters 
+  77  routers = None 
+  78   
+  79  ROUTER_KEYS = set(('default_application', 'applications', 'default_controller', 'controllers', 
+  80      'default_function', 'functions', 'default_language', 'languages', 
+  81      'domain', 'domains', 'root_static', 'path_prefix', 
+  82      'exclusive_domain', 'map_hyphen', 'map_static', 
+  83      'acfe_match', 'file_match', 'args_match')) 
+  84   
+  85  ROUTER_BASE_KEYS = set(('applications', 'default_application', 'domains', 'path_prefix')) 
+  86   
+  87  #  The external interface to rewrite consists of: 
+  88  # 
+  89  #  load: load routing configuration file(s) 
+  90  #  url_in: parse and rewrite incoming URL 
+  91  #  url_out: assemble and rewrite outgoing URL 
+  92  # 
+  93  #  thread.routes.default_application 
+  94  #  thread.routes.error_message 
+  95  #  thread.routes.error_message_ticket 
+  96  #  thread.routes.try_redirect_on_error 
+  97  #  thread.routes.error_handler 
+  98  # 
+  99  #  filter_url: helper for doctest & unittest 
+ 100  #  filter_err: helper for doctest & unittest 
+ 101  #  regex_filter_out: doctest 
+ 102   
+
     103 -def url_in(request, environ): 
+
     104      "parse and rewrite incoming URL" 
+ 105      if routers: 
+ 106          return map_url_in(request, environ) 
+ 107      return regex_url_in(request, environ) 
+
     108   
+
     109 -def url_out(request, env, application, controller, function, args, other, scheme, host, port): 
+
     110      "assemble and rewrite outgoing URL" 
+ 111      if routers: 
+ 112          acf = map_url_out(request, env, application, controller, function, args, other, scheme, host, port) 
+ 113          url = '%s%s' % (acf, other) 
+ 114      else: 
+ 115          url = '/%s/%s/%s%s' % (application, controller, function, other) 
+ 116          url = regex_filter_out(url, env) 
+ 117      # 
+ 118      #  fill in scheme and host if absolute URL is requested 
+ 119      #  scheme can be a string, eg 'http', 'https', 'ws', 'wss' 
+ 120      # 
+ 121      if scheme or port is not None: 
+ 122          if host is None:    # scheme or port implies host 
+ 123              host = True 
+ 124      if not scheme or scheme is True: 
+ 125          if request and request.env: 
+ 126              scheme = request.env.get('WSGI_URL_SCHEME', 'http').lower() 
+ 127          else: 
+ 128              scheme = 'http' # some reasonable default in case we need it 
+ 129      if host is not None: 
+ 130          if host is True: 
+ 131              host = request.env.http_host 
+ 132      if host: 
+ 133          if port is None: 
+ 134              port = '' 
+ 135          else: 
+ 136              port = ':%s' % port 
+ 137          url = '%s://%s%s%s' % (scheme, host, port, url) 
+ 138      return url 
+
     139   
+
     140 -def try_rewrite_on_error(http_response, request, environ, ticket=None): 
+
     141      """ 
+ 142      called from main.wsgibase to rewrite the http response. 
+ 143      """ 
+ 144      status = int(str(http_response.status).split()[0]) 
+ 145      if status>=399 and thread.routes.routes_onerror: 
+ 146          keys=set(('%s/%s' % (request.application, status), 
+ 147                    '%s/*' % (request.application), 
+ 148                    '*/%s' % (status), 
+ 149                    '*/*')) 
+ 150          for (key,uri) in thread.routes.routes_onerror: 
+ 151              if key in keys: 
+ 152                  if uri == '!': 
+ 153                      # do nothing! 
+ 154                      return http_response, environ 
+ 155                  elif '?' in uri: 
+ 156                      path_info, query_string = uri.split('?',1) 
+ 157                      query_string += '&' 
+ 158                  else: 
+ 159                      path_info, query_string = uri, '' 
+ 160                  query_string += \ 
+ 161                      'code=%s&ticket=%s&requested_uri=%s&request_url=%s' % \ 
+ 162                      (status,ticket,request.env.request_uri,request.url) 
+ 163                  if uri.startswith('http://') or uri.startswith('https://'): 
+ 164                      # make up a response 
+ 165                      url = path_info+'?'+query_string 
+ 166                      message = 'You are being redirected <a href="%s">here</a>' 
+ 167                      return HTTP(303, message % url, Location=url), environ 
+ 168                  elif path_info!=environ['PATH_INFO']: 
+ 169                      # rewrite request, call wsgibase recursively, avoid loop 
+ 170                      environ['PATH_INFO'] = path_info 
+ 171                      environ['QUERY_STRING'] = query_string 
+ 172                      return None, environ 
+ 173      # do nothing! 
+ 174      return http_response, environ 
+
     175   
+
     176 -def try_redirect_on_error(http_object, request, ticket=None): 
+
     177      "called from main.wsgibase to rewrite the http response" 
+ 178      status = int(str(http_object.status).split()[0]) 
+ 179      if status>399 and thread.routes.routes_onerror: 
+ 180          keys=set(('%s/%s' % (request.application, status), 
+ 181                    '%s/*' % (request.application), 
+ 182                    '*/%s' % (status), 
+ 183                    '*/*')) 
+ 184          for (key,redir) in thread.routes.routes_onerror: 
+ 185              if key in keys: 
+ 186                  if redir == '!': 
+ 187                      break 
+ 188                  elif '?' in redir: 
+ 189                      url = '%s&code=%s&ticket=%s&requested_uri=%s&request_url=%s' % \ 
+ 190                          (redir,status,ticket,request.env.request_uri,request.url) 
+ 191                  else: 
+ 192                      url = '%s?code=%s&ticket=%s&requested_uri=%s&request_url=%s' % \ 
+ 193                          (redir,status,ticket,request.env.request_uri,request.url) 
+ 194                  return HTTP(303, 
+ 195                              'You are being redirected <a href="%s">here</a>' % url, 
+ 196                              Location=url) 
+ 197      return http_object 
+
     198   
+ 199   
+
     200 -def load(routes='routes.py', app=None, data=None, rdict=None): 
+
     201      """ 
+ 202      load: read (if file) and parse routes 
+ 203      store results in params 
+ 204      (called from main.py at web2py initialization time) 
+ 205      If data is present, it's used instead of the routes.py contents. 
+ 206      If rdict is present, it must be a dict to be used for routers (unit test) 
+ 207      """ 
+ 208      global params 
+ 209      global routers 
+ 210      if app is None: 
+ 211          # reinitialize 
+ 212          global params_apps 
+ 213          params_apps = dict() 
+ 214          params = _params_default(app=None)  # regex rewrite parameters 
+ 215          thread.routes = params              # default to base regex rewrite parameters 
+ 216          routers = None 
+ 217   
+ 218      if isinstance(rdict, dict): 
+ 219          symbols = dict(routers=rdict) 
+ 220          path = 'rdict' 
+ 221      else: 
+ 222          if data is not None: 
+ 223              path = 'routes' 
+ 224          else: 
+ 225              if app is None: 
+ 226                  path = abspath(routes) 
+ 227              else: 
+ 228                  path = abspath('applications', app, routes) 
+ 229              if not os.path.exists(path): 
+ 230                  return 
+ 231              data = read_file(path).replace('\r\n','\n') 
+ 232   
+ 233          symbols = {} 
+ 234          try: 
+ 235              exec (data + '\n') in symbols 
+ 236          except SyntaxError, e: 
+ 237              logger.error( 
+ 238                  '%s has a syntax error and will not be loaded\n' % path 
+ 239                  + traceback.format_exc()) 
+ 240              raise e 
+ 241   
+ 242      p = _params_default(app) 
+ 243   
+ 244      for sym in ('routes_app', 'routes_in', 'routes_out'): 
+ 245          if sym in symbols: 
+ 246              for (k, v) in symbols[sym]: 
+ 247                  p[sym].append(compile_regex(k, v)) 
+ 248      for sym in ('routes_onerror', 'routes_apps_raw', 
+ 249                  'error_handler','error_message', 'error_message_ticket', 
+ 250                  'default_application','default_controller', 'default_function'): 
+ 251          if sym in symbols: 
+ 252              p[sym] = symbols[sym] 
+ 253      if 'routers' in symbols: 
+ 254          p.routers = Storage(symbols['routers']) 
+ 255          for key in p.routers: 
+ 256              if isinstance(p.routers[key], dict): 
+ 257                  p.routers[key] = Storage(p.routers[key]) 
+ 258   
+ 259      if app is None: 
+ 260          params = p                  # install base rewrite parameters 
+ 261          thread.routes = params      # install default as current routes 
+ 262          # 
+ 263          #  create the BASE router if routers in use 
+ 264          # 
+ 265          routers = params.routers    # establish routers if present 
+ 266          if isinstance(routers, dict): 
+ 267              routers = Storage(routers) 
+ 268          if routers is not None: 
+ 269              router = _router_default() 
+ 270              if routers.BASE: 
+ 271                  router.update(routers.BASE) 
+ 272              routers.BASE = router 
+ 273   
+ 274          #  scan each app in applications/ 
+ 275          #    create a router, if routers are in use 
+ 276          #    parse the app-specific routes.py if present 
+ 277          # 
+ 278          all_apps = [] 
+ 279          for appname in [app for app in os.listdir(abspath('applications')) if not app.startswith('.')]: 
+ 280              if os.path.isdir(abspath('applications', appname)) and \ 
+ 281                 os.path.isdir(abspath('applications', appname, 'controllers')): 
+ 282                  all_apps.append(appname) 
+ 283                  if routers: 
+ 284                      router = Storage(routers.BASE)   # new copy 
+ 285                      if appname in routers: 
+ 286                          for key in routers[appname].keys(): 
+ 287                              if key in ROUTER_BASE_KEYS: 
+ 288                                  raise SyntaxError, "BASE-only key '%s' in router '%s'" % (key, appname) 
+ 289                          router.update(routers[appname]) 
+ 290                      routers[appname] = router 
+ 291                  if os.path.exists(abspath('applications', appname, routes)): 
+ 292                      load(routes, appname) 
+ 293   
+ 294          if routers: 
+ 295              load_routers(all_apps) 
+ 296   
+ 297      else: # app 
+ 298          params_apps[app] = p 
+ 299          if routers and p.routers: 
+ 300              if app in p.routers: 
+ 301                  routers[app].update(p.routers[app]) 
+ 302   
+ 303      logger.debug('URL rewrite is on. configuration in %s' % path) 
+
     304   
+ 305   
+ 306  regex_at = re.compile(r'(?<!\\)\$[a-zA-Z]\w*') 
+ 307  regex_anything = re.compile(r'(?<!\\)\$anything') 
+ 308   
+
     309 -def compile_regex(k, v): 
+
     310      """ 
+ 311      Preprocess and compile the regular expressions in routes_app/in/out 
+ 312   
+ 313      The resulting regex will match a pattern of the form: 
+ 314   
+ 315          [remote address]:[protocol]://[host]:[method] [path] 
+ 316   
+ 317      We allow abbreviated regexes on input; here we try to complete them. 
+ 318      """ 
+ 319      k0 = k  # original k for error reporting 
+ 320      # bracket regex in ^...$ if not already done 
+ 321      if not k[0] == '^': 
+ 322          k = '^%s' % k 
+ 323      if not k[-1] == '$': 
+ 324          k = '%s$' % k 
+ 325      # if there are no :-separated parts, prepend a catch-all for the IP address 
+ 326      if k.find(':') < 0: 
+ 327          # k = '^.*?:%s' % k[1:] 
+ 328          k = '^.*?:https?://[^:/]+:[a-z]+ %s' % k[1:] 
+ 329      # if there's no ://, provide a catch-all for the protocol, host & method 
+ 330      if k.find('://') < 0: 
+ 331          i = k.find(':/') 
+ 332          if i < 0: 
+ 333              raise SyntaxError, "routes pattern syntax error: path needs leading '/' [%s]" % k0 
+ 334          k = r'%s:https?://[^:/]+:[a-z]+ %s' % (k[:i], k[i+1:]) 
+ 335      # $anything -> ?P<anything>.* 
+ 336      for item in regex_anything.findall(k): 
+ 337          k = k.replace(item, '(?P<anything>.*)') 
+ 338      # $a (etc) -> ?P<a>\w+ 
+ 339      for item in regex_at.findall(k): 
+ 340          k = k.replace(item, r'(?P<%s>\w+)' % item[1:]) 
+ 341      # same for replacement pattern, but with \g 
+ 342      for item in regex_at.findall(v): 
+ 343          v = v.replace(item, r'\g<%s>' % item[1:]) 
+ 344      return (re.compile(k, re.DOTALL), v) 
+
     345   
+
     346 -def load_routers(all_apps): 
+
     347      "load-time post-processing of routers" 
+ 348   
+ 349      for app in routers.keys(): 
+ 350          # initialize apps with routers that aren't present, on behalf of unit tests 
+ 351          if app not in all_apps: 
+ 352              all_apps.append(app) 
+ 353              router = Storage(routers.BASE)   # new copy 
+ 354              if app != 'BASE': 
+ 355                  for key in routers[app].keys(): 
+ 356                      if key in ROUTER_BASE_KEYS: 
+ 357                          raise SyntaxError, "BASE-only key '%s' in router '%s'" % (key, app) 
+ 358              router.update(routers[app]) 
+ 359              routers[app] = router 
+ 360          router = routers[app] 
+ 361          for key in router.keys(): 
+ 362              if key not in ROUTER_KEYS: 
+ 363                  raise SyntaxError, "unknown key '%s' in router '%s'" % (key, app) 
+ 364          if not router.controllers: 
+ 365              router.controllers = set() 
+ 366          elif not isinstance(router.controllers, str): 
+ 367              router.controllers = set(router.controllers) 
+ 368          if router.functions: 
+ 369              router.functions = set(router.functions) 
+ 370          else: 
+ 371              router.functions = set() 
+ 372          if router.languages: 
+ 373              router.languages = set(router.languages) 
+ 374          else: 
+ 375              router.languages = set() 
+ 376          if app != 'BASE': 
+ 377              for base_only in ROUTER_BASE_KEYS: 
+ 378                  router.pop(base_only, None) 
+ 379              if 'domain' in router: 
+ 380                  routers.BASE.domains[router.domain] = app 
+ 381              if isinstance(router.controllers, str) and router.controllers == 'DEFAULT': 
+ 382                  router.controllers = set() 
+ 383                  if os.path.isdir(abspath('applications', app)): 
+ 384                      cpath = abspath('applications', app, 'controllers') 
+ 385                      for cname in os.listdir(cpath): 
+ 386                          if os.path.isfile(abspath(cpath, cname)) and cname.endswith('.py'): 
+ 387                              router.controllers.add(cname[:-3]) 
+ 388              if router.controllers: 
+ 389                  router.controllers.add('static') 
+ 390                  router.controllers.add(router.default_controller) 
+ 391              if router.functions: 
+ 392                  router.functions.add(router.default_function) 
+ 393   
+ 394      if isinstance(routers.BASE.applications, str) and routers.BASE.applications == 'ALL': 
+ 395          routers.BASE.applications = list(all_apps) 
+ 396      if routers.BASE.applications: 
+ 397          routers.BASE.applications = set(routers.BASE.applications) 
+ 398      else: 
+ 399          routers.BASE.applications = set() 
+ 400   
+ 401      for app in routers.keys(): 
+ 402          # set router name 
+ 403          router = routers[app] 
+ 404          router.name = app 
+ 405          # compile URL validation patterns 
+ 406          router._acfe_match = re.compile(router.acfe_match) 
+ 407          router._file_match = re.compile(router.file_match) 
+ 408          if router.args_match: 
+ 409              router._args_match = re.compile(router.args_match) 
+ 410          # convert path_prefix to a list of path elements 
+ 411          if router.path_prefix: 
+ 412              if isinstance(router.path_prefix, str): 
+ 413                  router.path_prefix = router.path_prefix.strip('/').split('/') 
+ 414   
+ 415      #  rewrite BASE.domains as tuples 
+ 416      # 
+ 417      #      key:   'domain[:port]' -> (domain, port) 
+ 418      #      value: 'application[/controller] -> (application, controller) 
+ 419      #      (port and controller may be None) 
+ 420      # 
+ 421      domains = dict() 
+ 422      if routers.BASE.domains: 
+ 423          for (domain, app) in [(d.strip(':'), a.strip('/')) for (d, a) in routers.BASE.domains.items()]: 
+ 424              port = None 
+ 425              if ':' in domain: 
+ 426                  (domain, port) = domain.split(':') 
+ 427              ctlr = None 
+ 428              if '/' in app: 
+ 429                  (app, ctlr) = app.split('/') 
+ 430              if app not in all_apps and app not in routers: 
+ 431                  raise SyntaxError, "unknown app '%s' in domains" % app 
+ 432              domains[(domain, port)] = (app, ctlr) 
+ 433      routers.BASE.domains = domains 
+
     434   
+
     435 -def regex_uri(e, regexes, tag, default=None): 
+
     436      "filter incoming URI against a list of regexes" 
+ 437      path = e['PATH_INFO'] 
+ 438      host = e.get('HTTP_HOST', 'localhost').lower() 
+ 439      i = host.find(':') 
+ 440      if i > 0: 
+ 441          host = host[:i] 
+ 442      key = '%s:%s://%s:%s %s' % \ 
+ 443          (e.get('REMOTE_ADDR','localhost'), 
+ 444           e.get('WSGI_URL_SCHEME', 'http').lower(), host, 
+ 445           e.get('REQUEST_METHOD', 'get').lower(), path) 
+ 446      for (regex, value) in regexes: 
+ 447          if regex.match(key): 
+ 448              rewritten = regex.sub(value, key) 
+ 449              logger.debug('%s: [%s] [%s] -> %s' % (tag, key, value, rewritten)) 
+ 450              return rewritten 
+ 451      logger.debug('%s: [%s] -> %s (not rewritten)' % (tag, key, default)) 
+ 452      return default 
+
     453   
+
     454 -def regex_select(env=None, app=None, request=None): 
+
     455      """ 
+ 456      select a set of regex rewrite params for the current request 
+ 457      """ 
+ 458      if app: 
+ 459          thread.routes = params_apps.get(app, params) 
+ 460      elif env and params.routes_app: 
+ 461          if routers: 
+ 462              map_url_in(request, env, app=True) 
+ 463          else: 
+ 464              app = regex_uri(env, params.routes_app, "routes_app") 
+ 465              thread.routes = params_apps.get(app, params) 
+ 466      else: 
+ 467          thread.routes = params # default to base rewrite parameters 
+ 468      logger.debug("select routing parameters: %s" % thread.routes.name) 
+ 469      return app  # for doctest 
+
     470   
+
     471 -def regex_filter_in(e): 
+
     472      "regex rewrite incoming URL" 
+ 473      query = e.get('QUERY_STRING', None) 
+ 474      e['WEB2PY_ORIGINAL_URI'] = e['PATH_INFO'] + (query and ('?' + query) or '') 
+ 475      if thread.routes.routes_in: 
+ 476          path = regex_uri(e, thread.routes.routes_in, "routes_in", e['PATH_INFO']) 
+ 477          items = path.split('?', 1) 
+ 478          e['PATH_INFO'] = items[0] 
+ 479          if len(items) > 1: 
+ 480              if query: 
+ 481                  query = items[1] + '&' + query 
+ 482              else: 
+ 483                  query = items[1] 
+ 484              e['QUERY_STRING'] = query 
+ 485      e['REQUEST_URI'] = e['PATH_INFO'] + (query and ('?' + query) or '') 
+ 486      return e 
+
     487   
+ 488   
+ 489  # pattern to replace spaces with underscore in URL 
+ 490  #   also the html escaped variants '+' and '%20' are covered 
+ 491  regex_space = re.compile('(\+|\s|%20)+') 
+ 492   
+ 493  # pattern to find valid paths in url /application/controller/... 
+ 494  #   this could be: 
+ 495  #     for static pages: 
+ 496  #        /<b:application>/static/<x:file> 
+ 497  #     for dynamic pages: 
+ 498  #        /<a:application>[/<c:controller>[/<f:function>[.<e:ext>][/<s:args>]]] 
+ 499  #   application, controller, function and ext may only contain [a-zA-Z0-9_] 
+ 500  #   file and args may also contain '-', '=', '.' and '/' 
+ 501  #   apps in routes_apps_raw must parse raw_args into args 
+ 502   
+ 503  regex_static = re.compile(r''' 
+ 504       (^                              # static pages 
+ 505           /(?P<b> \w+)                # b=app 
+ 506           /static                     # /b/static 
+ 507           /(?P<x> (\w[\-\=\./]?)* )   # x=file 
+ 508       $) 
+ 509       ''', re.X) 
+ 510   
+ 511  regex_url = re.compile(r''' 
+ 512       (^(                                  # (/a/c/f.e/s) 
+ 513           /(?P<a> [\w\s+]+ )               # /a=app 
+ 514           (                                # (/c.f.e/s) 
+ 515               /(?P<c> [\w\s+]+ )           # /a/c=controller 
+ 516               (                            # (/f.e/s) 
+ 517                   /(?P<f> [\w\s+]+ )       # /a/c/f=function 
+ 518                   (                        # (.e) 
+ 519                       \.(?P<e> [\w\s+]+ )  # /a/c/f.e=extension 
+ 520                   )? 
+ 521                   (                        # (/s) 
+ 522                       /(?P<r>              # /a/c/f.e/r=raw_args 
+ 523                       .* 
+ 524                       ) 
+ 525                   )? 
+ 526               )? 
+ 527           )? 
+ 528       )? 
+ 529       /?$) 
+ 530       ''', re.X) 
+ 531   
+ 532  regex_args = re.compile(r''' 
+ 533       (^ 
+ 534           (?P<s> 
+ 535               ( [\w@/-][=.]? )*          # s=args 
+ 536           )? 
+ 537       /?$)    # trailing slash 
+ 538       ''', re.X) 
+ 539   
+
     540 -def regex_url_in(request, environ): 
+
     541      "rewrite and parse incoming URL" 
+ 542   
+ 543      # ################################################## 
+ 544      # select application 
+ 545      # rewrite URL if routes_in is defined 
+ 546      # update request.env 
+ 547      # ################################################## 
+ 548   
+ 549      regex_select(env=environ, request=request) 
+ 550   
+ 551      if thread.routes.routes_in: 
+ 552          environ = regex_filter_in(environ) 
+ 553   
+ 554      for (key, value) in environ.items(): 
+ 555          request.env[key.lower().replace('.', '_')] = value 
+ 556   
+ 557      path = request.env.path_info.replace('\\', '/') 
+ 558   
+ 559      # ################################################## 
+ 560      # serve if a static file 
+ 561      # ################################################## 
+ 562   
+ 563      match = regex_static.match(regex_space.sub('_', path)) 
+ 564      if match and match.group('x'): 
+ 565          static_file = os.path.join(request.env.applications_parent, 
+ 566                                     'applications', match.group('b'), 
+ 567                                     'static', match.group('x')) 
+ 568          return (static_file, environ) 
+ 569   
+ 570      # ################################################## 
+ 571      # parse application, controller and function 
+ 572      # ################################################## 
+ 573   
+ 574      path = re.sub('%20', ' ', path) 
+ 575      match = regex_url.match(path) 
+ 576      if not match or match.group('c') == 'static': 
+ 577          raise HTTP(400, 
+ 578                     thread.routes.error_message % 'invalid request', 
+ 579                     web2py_error='invalid path') 
+ 580   
+ 581      request.application = \ 
+ 582          regex_space.sub('_', match.group('a') or thread.routes.default_application) 
+ 583      request.controller = \ 
+ 584          regex_space.sub('_', match.group('c') or thread.routes.default_controller) 
+ 585      request.function = \ 
+ 586          regex_space.sub('_', match.group('f') or thread.routes.default_function) 
+ 587      group_e = match.group('e') 
+ 588      request.raw_extension = group_e and regex_space.sub('_', group_e) or None 
+ 589      request.extension = request.raw_extension or 'html' 
+ 590      request.raw_args = match.group('r') 
+ 591      request.args = List([]) 
+ 592      if request.application in thread.routes.routes_apps_raw: 
+ 593          # application is responsible for parsing args 
+ 594          request.args = None 
+ 595      elif request.raw_args: 
+ 596          match = regex_args.match(request.raw_args.replace(' ', '_')) 
+ 597          if match: 
+ 598              group_s = match.group('s') 
+ 599              request.args = \ 
+ 600                  List((group_s and group_s.split('/')) or []) 
+ 601              if request.args and request.args[-1] == '': 
+ 602                  request.args.pop()  # adjust for trailing empty arg 
+ 603          else: 
+ 604              raise HTTP(400, 
+ 605                         thread.routes.error_message % 'invalid request', 
+ 606                         web2py_error='invalid path (args)') 
+ 607      return (None, environ) 
+
     608   
+ 609   
+
     610 -def regex_filter_out(url, e=None): 
+
     611      "regex rewrite outgoing URL" 
+ 612      if not hasattr(thread, 'routes'): 
+ 613          regex_select()    # ensure thread.routes is set (for application threads) 
+ 614      if routers: 
+ 615          return url  # already filtered 
+ 616      if thread.routes.routes_out: 
+ 617          items = url.split('?', 1) 
+ 618          if e: 
+ 619              host = e.get('http_host', 'localhost').lower() 
+ 620              i = host.find(':') 
+ 621              if i > 0: 
+ 622                  host = host[:i] 
+ 623              items[0] = '%s:%s://%s:%s %s' % \ 
+ 624                   (e.get('remote_addr', ''), 
+ 625                    e.get('wsgi_url_scheme', 'http').lower(), host, 
+ 626                    e.get('request_method', 'get').lower(), items[0]) 
+ 627          else: 
+ 628              items[0] = ':http://localhost:get %s' % items[0] 
+ 629          for (regex, value) in thread.routes.routes_out: 
+ 630              if regex.match(items[0]): 
+ 631                  rewritten = '?'.join([regex.sub(value, items[0])] + items[1:]) 
+ 632                  logger.debug('routes_out: [%s] -> %s' % (url, rewritten)) 
+ 633                  return rewritten 
+ 634      logger.debug('routes_out: [%s] not rewritten' % url) 
+ 635      return url 
+
     636   
+ 637   
+
     638 -def filter_url(url, method='get', remote='0.0.0.0', out=False, app=False, lang=None, 
+ 639          domain=(None,None), env=False, scheme=None, host=None, port=None): 
+
     640      "doctest/unittest interface to regex_filter_in() and regex_filter_out()" 
+ 641      regex_url = re.compile(r'^(?P<scheme>http|https|HTTP|HTTPS)\://(?P<host>[^/]*)(?P<uri>.*)') 
+ 642      match = regex_url.match(url) 
+ 643      urlscheme = match.group('scheme').lower() 
+ 644      urlhost = match.group('host').lower() 
+ 645      uri = match.group('uri') 
+ 646      k = uri.find('?') 
+ 647      if k < 0: 
+ 648          k = len(uri) 
+ 649      (path_info, query_string) = (uri[:k], uri[k+1:]) 
+ 650      path_info = urllib.unquote(path_info)   # simulate server 
+ 651      e = { 
+ 652           'REMOTE_ADDR': remote, 
+ 653           'REQUEST_METHOD': method, 
+ 654           'WSGI_URL_SCHEME': urlscheme, 
+ 655           'HTTP_HOST': urlhost, 
+ 656           'REQUEST_URI': uri, 
+ 657           'PATH_INFO': path_info, 
+ 658           'QUERY_STRING': query_string, 
+ 659           #for filter_out request.env use lowercase 
+ 660           'remote_addr': remote, 
+ 661           'request_method': method, 
+ 662           'wsgi_url_scheme': urlscheme, 
+ 663           'http_host': urlhost 
+ 664      } 
+ 665   
+ 666      request = Storage() 
+ 667      e["applications_parent"] = global_settings.applications_parent 
+ 668      request.env = Storage(e) 
+ 669      request.uri_language = lang 
+ 670   
+ 671      #  determine application only 
+ 672      # 
+ 673      if app: 
+ 674          if routers: 
+ 675              return map_url_in(request, e, app=True) 
+ 676          return regex_select(e) 
+ 677   
+ 678      #  rewrite outbound URL 
+ 679      # 
+ 680      if out: 
+ 681          (request.env.domain_application, request.env.domain_controller) = domain 
+ 682          items = path_info.lstrip('/').split('/') 
+ 683          if items[-1] == '': 
+ 684              items.pop() # adjust trailing empty args 
+ 685          assert len(items) >= 3, "at least /a/c/f is required" 
+ 686          a = items.pop(0) 
+ 687          c = items.pop(0) 
+ 688          f = items.pop(0) 
+ 689          if not routers: 
+ 690              return regex_filter_out(uri, e) 
+ 691          acf = map_url_out(request, None, a, c, f, items, None, scheme, host, port) 
+ 692          if items: 
+ 693              url = '%s/%s' % (acf, '/'.join(items)) 
+ 694              if items[-1] == '': 
+ 695                  url += '/' 
+ 696          else: 
+ 697              url = acf 
+ 698          if query_string: 
+ 699              url += '?' + query_string 
+ 700          return url 
+ 701   
+ 702      #  rewrite inbound URL 
+ 703      # 
+ 704      (static, e) = url_in(request, e) 
+ 705      if static: 
+ 706          return static 
+ 707      result = "/%s/%s/%s" % (request.application, request.controller, request.function) 
+ 708      if request.extension and request.extension != 'html': 
+ 709          result += ".%s" % request.extension 
+ 710      if request.args: 
+ 711          result += " %s" % request.args 
+ 712      if e['QUERY_STRING']: 
+ 713          result += " ?%s" % e['QUERY_STRING'] 
+ 714      if request.uri_language: 
+ 715          result += " (%s)" % request.uri_language 
+ 716      if env: 
+ 717          return request.env 
+ 718      return result 
+
     719   
+ 720   
+
     721 -def filter_err(status, application='app', ticket='tkt'): 
+
     722      "doctest/unittest interface to routes_onerror" 
+ 723      if status > 399 and thread.routes.routes_onerror: 
+ 724          keys = set(('%s/%s' % (application, status), 
+ 725                    '%s/*' % (application), 
+ 726                    '*/%s' % (status), 
+ 727                    '*/*')) 
+ 728          for (key,redir) in thread.routes.routes_onerror: 
+ 729              if key in keys: 
+ 730                  if redir == '!': 
+ 731                      break 
+ 732                  elif '?' in redir: 
+ 733                      url = redir + '&' + 'code=%s&ticket=%s' % (status,ticket) 
+ 734                  else: 
+ 735                      url = redir + '?' + 'code=%s&ticket=%s' % (status,ticket) 
+ 736                  return url # redirection 
+ 737      return status # no action 
+
     738   
+ 739  #  router support 
+ 740  # 
+
     741 -class MapUrlIn(object): 
+
     742      "logic for mapping incoming URLs" 
+ 743   
+
     744 -    def __init__(self, request=None, env=None): 
+
     745          "initialize a map-in object" 
+ 746          self.request = request 
+ 747          self.env = env 
+ 748   
+ 749          self.router = None 
+ 750          self.application = None 
+ 751          self.language = None 
+ 752          self.controller = None 
+ 753          self.function = None 
+ 754          self.extension = 'html' 
+ 755   
+ 756          self.controllers = set() 
+ 757          self.functions = set() 
+ 758          self.languages = set() 
+ 759          self.default_language = None 
+ 760          self.map_hyphen = False 
+ 761          self.exclusive_domain = False 
+ 762   
+ 763          path = self.env['PATH_INFO'] 
+ 764          self.query = self.env.get('QUERY_STRING', None) 
+ 765          path = path.lstrip('/') 
+ 766          self.env['PATH_INFO'] = '/' + path 
+ 767          self.env['WEB2PY_ORIGINAL_URI'] = self.env['PATH_INFO'] + (self.query and ('?' + self.query) or '') 
+ 768   
+ 769          # to handle empty args, strip exactly one trailing slash, if present 
+ 770          # .../arg1// represents one trailing empty arg 
+ 771          # 
+ 772          if path.endswith('/'): 
+ 773              path = path[:-1] 
+ 774          self.args = List(path and path.split('/') or []) 
+ 775   
+ 776          # see http://www.python.org/dev/peps/pep-3333/#url-reconstruction for URL composition 
+ 777          self.remote_addr = self.env.get('REMOTE_ADDR','localhost') 
+ 778          self.scheme = self.env.get('WSGI_URL_SCHEME', 'http').lower() 
+ 779          self.method = self.env.get('REQUEST_METHOD', 'get').lower() 
+ 780          self.host = self.env.get('HTTP_HOST') 
+ 781          self.port = None 
+ 782          if not self.host: 
+ 783              self.host = self.env.get('SERVER_NAME') 
+ 784              self.port = self.env.get('SERVER_PORT') 
+ 785          if not self.host: 
+ 786              self.host = 'localhost' 
+ 787              self.port = '80' 
+ 788          if ':' in self.host: 
+ 789              (self.host, self.port) = self.host.split(':') 
+ 790          if not self.port: 
+ 791              if self.scheme == 'https': 
+ 792                  self.port = '443' 
+ 793              else: 
+ 794                  self.port = '80' 
+
     795   
+
     796 -    def map_prefix(self): 
+
     797          "strip path prefix, if present in its entirety" 
+ 798          prefix = routers.BASE.path_prefix 
+ 799          if prefix: 
+ 800              prefixlen = len(prefix) 
+ 801              if prefixlen > len(self.args): 
+ 802                  return 
+ 803              for i in xrange(prefixlen): 
+ 804                  if prefix[i] != self.args[i]: 
+ 805                      return  # prefix didn't match 
+ 806              self.args = List(self.args[prefixlen:]) # strip the prefix 
+
     807   
+
     808 -    def map_app(self): 
+
     809          "determine application name" 
+ 810          base = routers.BASE  # base router 
+ 811          self.domain_application = None 
+ 812          self.domain_controller = None 
+ 813          arg0 = self.harg0 
+ 814          if base.applications and arg0 in base.applications: 
+ 815              self.application = arg0 
+ 816          elif (self.host, self.port) in base.domains: 
+ 817              (self.application, self.domain_controller) = base.domains[(self.host, self.port)] 
+ 818              self.env['domain_application'] = self.application 
+ 819              self.env['domain_controller'] = self.domain_controller 
+ 820          elif (self.host, None) in base.domains: 
+ 821              (self.application, self.domain_controller) = base.domains[(self.host, None)] 
+ 822              self.env['domain_application'] = self.application 
+ 823              self.env['domain_controller'] = self.domain_controller 
+ 824          elif arg0 and not base.applications: 
+ 825              self.application = arg0 
+ 826          else: 
+ 827              self.application = base.default_application or '' 
+ 828          self.pop_arg_if(self.application == arg0) 
+ 829   
+ 830          if not base._acfe_match.match(self.application): 
+ 831              raise HTTP(400, thread.routes.error_message % 'invalid request', 
+ 832                         web2py_error="invalid application: '%s'" % self.application) 
+ 833   
+ 834          if self.application not in routers and \ 
+ 835            (self.application != thread.routes.default_application or self.application == 'welcome'): 
+ 836              raise HTTP(400, thread.routes.error_message % 'invalid request', 
+ 837                  web2py_error="unknown application: '%s'" % self.application) 
+ 838   
+ 839          #  set the application router 
+ 840          # 
+ 841          logger.debug("select application=%s" % self.application) 
+ 842          self.request.application = self.application 
+ 843          if self.application not in routers: 
+ 844              self.router = routers.BASE                # support gluon.main.wsgibase init->welcome 
+ 845          else: 
+ 846              self.router = routers[self.application]   # application router 
+ 847          self.controllers = self.router.controllers 
+ 848          self.default_controller = self.domain_controller or self.router.default_controller 
+ 849          self.functions = self.router.functions 
+ 850          self.languages = self.router.languages 
+ 851          self.default_language = self.router.default_language 
+ 852          self.map_hyphen = self.router.map_hyphen 
+ 853          self.exclusive_domain = self.router.exclusive_domain 
+ 854          self._acfe_match = self.router._acfe_match 
+ 855          self._file_match = self.router._file_match 
+ 856          self._args_match = self.router._args_match 
+
     857   
+
     858 -    def map_root_static(self): 
+
     859          ''' 
+ 860          handle root-static files (no hyphen mapping) 
+ 861   
+ 862          a root-static file is one whose incoming URL expects it to be at the root, 
+ 863          typically robots.txt & favicon.ico 
+ 864          ''' 
+ 865          if len(self.args) == 1 and self.arg0 in self.router.root_static: 
+ 866              self.controller = self.request.controller = 'static' 
+ 867              root_static_file = os.path.join(self.request.env.applications_parent, 
+ 868                                     'applications', self.application, 
+ 869                                     self.controller, self.arg0) 
+ 870              logger.debug("route: root static=%s" % root_static_file) 
+ 871              return root_static_file 
+ 872          return None 
+
     873   
+
     874 -    def map_language(self): 
+
     875          "handle language (no hyphen mapping)" 
+ 876          arg0 = self.arg0  # no hyphen mapping 
+ 877          if arg0 and self.languages and arg0 in self.languages: 
+ 878              self.language = arg0 
+ 879          else: 
+ 880              self.language = self.default_language 
+ 881          if self.language: 
+ 882              logger.debug("route: language=%s" % self.language) 
+ 883              self.pop_arg_if(self.language == arg0) 
+ 884              arg0 = self.arg0 
+
     885   
+
     886 -    def map_controller(self): 
+
     887          "identify controller" 
+ 888          #  handle controller 
+ 889          # 
+ 890          arg0 = self.harg0    # map hyphens 
+ 891          if not arg0 or (self.controllers and arg0 not in self.controllers): 
+ 892              self.controller = self.default_controller or '' 
+ 893          else: 
+ 894              self.controller = arg0 
+ 895          self.pop_arg_if(arg0 == self.controller) 
+ 896          logger.debug("route: controller=%s" % self.controller) 
+ 897          if not self.router._acfe_match.match(self.controller): 
+ 898              raise HTTP(400, thread.routes.error_message % 'invalid request', 
+ 899                         web2py_error='invalid controller') 
+
     900   
+
     901 -    def map_static(self): 
+
     902          ''' 
+ 903          handle static files 
+ 904          file_match but no hyphen mapping 
+ 905          ''' 
+ 906          if self.controller != 'static': 
+ 907              return None 
+ 908          file = '/'.join(self.args) 
+ 909          if not self.router._file_match.match(file): 
+ 910              raise HTTP(400, thread.routes.error_message % 'invalid request', 
+ 911                         web2py_error='invalid static file') 
+ 912          # 
+ 913          #  support language-specific static subdirectories, 
+ 914          #  eg /appname/en/static/filename => applications/appname/static/en/filename 
+ 915          #  if language-specific file doesn't exist, try same file in static 
+ 916          # 
+ 917          if self.language: 
+ 918              static_file = os.path.join(self.request.env.applications_parent, 
+ 919                                     'applications', self.application, 
+ 920                                     'static', self.language, file) 
+ 921          if not self.language or not os.path.isfile(static_file): 
+ 922              static_file = os.path.join(self.request.env.applications_parent, 
+ 923                                     'applications', self.application, 
+ 924                                     'static', file) 
+ 925          logger.debug("route: static=%s" % static_file) 
+ 926          return static_file 
+
     927   
+
     928 -    def map_function(self): 
+
     929          "handle function.extension" 
+ 930          arg0 = self.harg0    # map hyphens 
+ 931          if not arg0 or self.functions and arg0 not in self.functions and self.controller == self.default_controller: 
+ 932              self.function = self.router.default_function or "" 
+ 933              self.pop_arg_if(arg0 and self.function == arg0) 
+ 934          else: 
+ 935              func_ext = arg0.split('.') 
+ 936              if len(func_ext) > 1: 
+ 937                  self.function = func_ext[0] 
+ 938                  self.extension = func_ext[-1] 
+ 939              else: 
+ 940                  self.function = arg0 
+ 941              self.pop_arg_if(True) 
+ 942          logger.debug("route: function.ext=%s.%s" % (self.function, self.extension)) 
+ 943   
+ 944          if not self.router._acfe_match.match(self.function): 
+ 945              raise HTTP(400, thread.routes.error_message % 'invalid request', 
+ 946                         web2py_error='invalid function') 
+ 947          if self.extension and not self.router._acfe_match.match(self.extension): 
+ 948              raise HTTP(400, thread.routes.error_message % 'invalid request', 
+ 949                         web2py_error='invalid extension') 
+
     950   
+
     951 -    def validate_args(self): 
+
     952          ''' 
+ 953          check args against validation pattern 
+ 954          ''' 
+ 955          for arg in self.args: 
+ 956              if not self.router._args_match.match(arg): 
+ 957                  raise HTTP(400, thread.routes.error_message % 'invalid request', 
+ 958                             web2py_error='invalid arg <%s>' % arg) 
+
     959   
+
     960 -    def update_request(self): 
+
     961          ''' 
+ 962          update request from self 
+ 963          build env.request_uri 
+ 964          make lower-case versions of http headers in env 
+ 965          ''' 
+ 966          self.request.application = self.application 
+ 967          self.request.controller = self.controller 
+ 968          self.request.function = self.function 
+ 969          self.request.extension = self.extension 
+ 970          self.request.args = self.args 
+ 971          if self.language: 
+ 972              self.request.uri_language = self.language 
+ 973          uri = '/%s/%s/%s' % (self.application, self.controller, self.function) 
+ 974          if self.map_hyphen: 
+ 975              uri = uri.replace('_', '-') 
+ 976          if self.extension != 'html': 
+ 977              uri += '.' + self.extension 
+ 978          if self.language: 
+ 979              uri = '/%s%s' % (self.language, uri) 
+ 980          uri += self.args and urllib.quote('/' + '/'.join([str(x) for x in self.args])) or '' 
+ 981          uri += (self.query and ('?' + self.query) or '') 
+ 982          self.env['REQUEST_URI'] = uri 
+ 983          for (key, value) in self.env.items(): 
+ 984              self.request.env[key.lower().replace('.', '_')] = value 
+
     985   
+ 986      @property 
+
     987 -    def arg0(self): 
+
     988          "return first arg" 
+ 989          return self.args(0) 
+
     990   
+ 991      @property 
+
     992 -    def harg0(self): 
+
     993          "return first arg with optional hyphen mapping" 
+ 994          if self.map_hyphen and self.args(0): 
+ 995              return self.args(0).replace('-', '_') 
+ 996          return self.args(0) 
+
     997   
+
     998 -    def pop_arg_if(self, dopop): 
+
     999          "conditionally remove first arg and return new first arg" 
+1000          if dopop: 
+1001              self.args.pop(0) 
+
    1002   
+
    1003 -class MapUrlOut(object): 
+
    1004      "logic for mapping outgoing URLs" 
+1005   
+
    1006 -    def __init__(self, request, env, application, controller, function, args, other, scheme, host, port): 
+
    1007          "initialize a map-out object" 
+1008          self.default_application = routers.BASE.default_application 
+1009          if application in routers: 
+1010              self.router = routers[application] 
+1011          else: 
+1012              self.router = routers.BASE 
+1013          self.request = request 
+1014          self.env = env 
+1015          self.application = application 
+1016          self.controller = controller 
+1017          self.function = function 
+1018          self.args = args 
+1019          self.other = other 
+1020          self.scheme = scheme 
+1021          self.host = host 
+1022          self.port = port 
+1023   
+1024          self.applications = routers.BASE.applications 
+1025          self.controllers = self.router.controllers 
+1026          self.functions = self.router.functions 
+1027          self.languages = self.router.languages 
+1028          self.default_language = self.router.default_language 
+1029          self.exclusive_domain = self.router.exclusive_domain 
+1030          self.map_hyphen = self.router.map_hyphen 
+1031          self.map_static = self.router.map_static 
+1032          self.path_prefix = routers.BASE.path_prefix 
+1033   
+1034          self.domain_application = request and self.request.env.domain_application 
+1035          self.domain_controller = request and self.request.env.domain_controller 
+1036          self.default_function = self.router.default_function 
+1037   
+1038          if (self.router.exclusive_domain and self.domain_application and self.domain_application != self.application and not self.host): 
+1039              raise SyntaxError, 'cross-domain conflict: must specify host' 
+1040   
+1041          lang = request and request.uri_language 
+1042          if lang and self.languages and lang in self.languages: 
+1043              self.language = lang 
+1044          else: 
+1045              self.language = None 
+1046   
+1047          self.omit_application = False 
+1048          self.omit_language = False 
+1049          self.omit_controller = False 
+1050          self.omit_function = False 
+
    1051   
+
    1052 -    def omit_lang(self): 
+
    1053          "omit language if possible" 
+1054   
+1055          if not self.language or self.language == self.default_language: 
+1056              self.omit_language = True 
+
    1057   
+
    1058 -    def omit_acf(self): 
+
    1059          "omit what we can of a/c/f" 
+1060   
+1061          router = self.router 
+1062   
+1063          #  Handle the easy no-args case of tail-defaults: /a/c  /a  / 
+1064          # 
+1065          if not self.args and self.function == router.default_function: 
+1066              self.omit_function = True 
+1067              if self.controller == router.default_controller: 
+1068                  self.omit_controller = True 
+1069                  if self.application == self.default_application: 
+1070                      self.omit_application = True 
+1071   
+1072          #  omit default application 
+1073          #  (which might be the domain default application) 
+1074          # 
+1075          default_application = self.domain_application or self.default_application 
+1076          if self.application == default_application: 
+1077              self.omit_application = True 
+1078   
+1079          #  omit controller if default controller 
+1080          # 
+1081          default_controller = ((self.application == self.domain_application) and self.domain_controller) or router.default_controller or '' 
+1082          if self.controller == default_controller: 
+1083              self.omit_controller = True 
+1084   
+1085          #  omit function if default controller/function 
+1086          # 
+1087          if self.functions and self.function == self.default_function and self.omit_controller: 
+1088              self.omit_function = True 
+1089   
+1090          #  prohibit ambiguous cases 
+1091          # 
+1092          #  because we presume the lang string to be unambiguous, its presence protects application omission 
+1093          # 
+1094          if self.omit_language: 
+1095              if not self.applications or self.controller in self.applications: 
+1096                  self.omit_application = False 
+1097              if self.omit_application: 
+1098                  if not self.applications or self.function in self.applications: 
+1099                      self.omit_controller = False 
+1100          if not self.controllers or self.function in self.controllers: 
+1101              self.omit_controller = False 
+1102          if self.args: 
+1103              if self.args[0] in self.functions or self.args[0] in self.controllers or self.args[0] in self.applications: 
+1104                  self.omit_function = False 
+1105          if self.omit_controller: 
+1106              if self.function in self.controllers or self.function in self.applications: 
+1107                  self.omit_controller = False 
+1108          if self.omit_application: 
+1109              if self.controller in self.applications: 
+1110                  self.omit_application = False 
+1111   
+1112          #  handle static as a special case 
+1113          #  (easier for external static handling) 
+1114          # 
+1115          if self.controller == 'static' or self.controller.startswith('static/'): 
+1116              if not self.map_static: 
+1117                  self.omit_application = False 
+1118                  if self.language: 
+1119                      self.omit_language = False 
+1120              self.omit_controller = False 
+1121              self.omit_function = False 
+
    1122   
+
    1123 -    def build_acf(self): 
+
    1124          "build acf from components" 
+1125          acf = '' 
+1126          if self.map_hyphen: 
+1127              self.application = self.application.replace('_', '-') 
+1128              self.controller = self.controller.replace('_', '-') 
+1129              if self.controller != 'static' and not self.controller.startswith('static/'): 
+1130                  self.function = self.function.replace('_', '-') 
+1131          if not self.omit_application: 
+1132              acf += '/' + self.application 
+1133          if not self.omit_language: 
+1134              acf += '/' + self.language 
+1135          if not self.omit_controller: 
+1136              acf += '/' + self.controller 
+1137          if not self.omit_function: 
+1138              acf += '/' + self.function 
+1139          if self.path_prefix: 
+1140              acf = '/' + '/'.join(self.path_prefix) + acf 
+1141          if self.args: 
+1142              return acf 
+1143          return acf or '/' 
+
    1144   
+
    1145 -    def acf(self): 
+
    1146          "convert components to /app/lang/controller/function" 
+1147   
+1148          if not routers: 
+1149              return None         # use regex filter 
+1150          self.omit_lang()        # try to omit language 
+1151          self.omit_acf()         # try to omit a/c/f 
+1152          return self.build_acf() # build and return the /a/lang/c/f string 
+
    1153   
+1154   
+
    1155 -def map_url_in(request, env, app=False): 
+
    1156      "route incoming URL" 
+1157   
+1158      #  initialize router-url object 
+1159      # 
+1160      thread.routes = params  # default to base routes 
+1161      map = MapUrlIn(request=request, env=env) 
+1162      map.map_prefix()  # strip prefix if present 
+1163      map.map_app()     # determine application 
+1164   
+1165      #  configure thread.routes for error rewrite 
+1166      # 
+1167      if params.routes_app: 
+1168          thread.routes = params_apps.get(app, params) 
+1169   
+1170      if app: 
+1171          return map.application 
+1172   
+1173      root_static_file = map.map_root_static() # handle root-static files 
+1174      if root_static_file: 
+1175          return (root_static_file, map.env) 
+1176      map.map_language() 
+1177      map.map_controller() 
+1178      static_file = map.map_static() 
+1179      if static_file: 
+1180          return (static_file, map.env) 
+1181      map.map_function() 
+1182      map.validate_args() 
+1183      map.update_request() 
+1184      return (None, map.env) 
+
    1185   
+
    1186 -def map_url_out(request, env, application, controller, function, args, other, scheme, host, port): 
+
    1187      ''' 
+1188      supply /a/c/f (or /a/lang/c/f) portion of outgoing url 
+1189   
+1190      The basic rule is that we can only make transformations 
+1191      that map_url_in can reverse. 
+1192   
+1193      Suppose that the incoming arguments are a,c,f,args,lang 
+1194      and that the router defaults are da, dc, df, dl. 
+1195   
+1196      We can perform these transformations trivially if args=[] and lang=None or dl: 
+1197   
+1198      /da/dc/df => / 
+1199      /a/dc/df => /a 
+1200      /a/c/df => /a/c 
+1201   
+1202      We would also like to be able to strip the default application or application/controller 
+1203      from URLs with function/args present, thus: 
+1204   
+1205          /da/c/f/args  => /c/f/args 
+1206          /da/dc/f/args => /f/args 
+1207   
+1208      We use [applications] and [controllers] and [functions] to suppress ambiguous omissions. 
+1209   
+1210      We assume that language names do not collide with a/c/f names. 
+1211      ''' 
+1212      map = MapUrlOut(request, env, application, controller, function, args, other, scheme, host, port) 
+1213      return map.acf() 
+
    1214   
+
    1215 -def get_effective_router(appname): 
+
    1216      "return a private copy of the effective router for the specified application" 
+1217      if not routers or appname not in routers: 
+1218          return None 
+1219      return Storage(routers[appname])  # return a copy 
+
    1220   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.rewrite.MapUrlIn-class.html
Index: applications/examples/static/epydoc/web2py.gluon.rewrite.MapUrlIn-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.rewrite.MapUrlIn-class.html
@@ -0,0 +1,532 @@
+
+
+
+
+  web2py.gluon.rewrite.MapUrlIn
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module rewrite ::
+        Class MapUrlIn
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class MapUrlIn
    source code

    
+
    +object --+
+         |
+        MapUrlIn
+
    
+
+
    
+logic for mapping incoming URLs

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        request=1,
+        env=1)
    
+      initialize a map-in object    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    map_prefix(self)
    
+      strip path prefix, if present in its entirety    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    map_app(self)
    
+      determine application name    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    map_root_static(self)
    
+      handle root-static files (no hyphen mapping)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    map_language(self)
    
+      handle language (no hyphen mapping)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    map_controller(self)
    
+      identify controller    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    map_static(self)
    
+      handle static files file_match but no hyphen mapping    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    map_function(self)
    
+      handle function.extension    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    validate_args(self)
    
+      check args against validation pattern    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    update_request(self)
    
+      update request from self build env.request_uri make lower-case 
+      versions of http headers in env    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    pop_arg_if(self,
+        dopop)
    
+      conditionally remove first arg and return new first arg    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+       
+    
+        arg0
    
+      return first arg
+    
    
+       
+    
+        harg0
    
+      return first arg with optional hyphen mapping
+    
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        request=1,
+        env=1)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  initialize a map-in object
+  
    
+    
    Overrides:
+      object.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    map_root_static(self)
+  
    
+      		source code 
+    
    
+  
+  
    handle root-static files (no hyphen mapping)
    
+  a root-static file is one whose incoming URL expects it to be at the 
+  root, typically robots.txt & favicon.ico
+  
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Property Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    arg0
    
+  return first arg
+  
    
+    
    Get Method:
    
+    
    unreachable.arg0(self)
+        - return first arg
+    
    
+    
    Set Method:
    
+    
    +1
+
    
+
+        - PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+    
    Delete Method:
    
+    
    +1
+
    
+
+        - PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    harg0
    
+  return first arg with optional hyphen mapping
+  
    
+    
    Get Method:
    
+    
    unreachable.harg0(self)
+        - return first arg with optional hyphen mapping
+    
    
+    
    Set Method:
    
+    
    +1
+
    
+
+        - PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+    
    Delete Method:
    
+    
    +1
+
    
+
+        - PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.rewrite.MapUrlOut-class.html
Index: applications/examples/static/epydoc/web2py.gluon.rewrite.MapUrlOut-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.rewrite.MapUrlOut-class.html
@@ -0,0 +1,330 @@
+
+
+
+
+  web2py.gluon.rewrite.MapUrlOut
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module rewrite ::
+        Class MapUrlOut
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class MapUrlOut
    source code

    
+
    +object --+
+         |
+        MapUrlOut
+
    
+
+
    
+logic for mapping outgoing URLs

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        request,
+        env,
+        application,
+        controller,
+        function,
+        args,
+        other,
+        scheme,
+        host,
+        port)
    
+      initialize a map-out object    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    omit_lang(self)
    
+      omit language if possible    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    omit_acf(self)
    
+      omit what we can of a/c/f    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    build_acf(self)
    
+      build acf from components    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    acf(self)
    
+      convert components to /app/lang/controller/function    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        request,
+        env,
+        application,
+        controller,
+        function,
+        args,
+        other,
+        scheme,
+        host,
+        port)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  initialize a map-out object
+  
    
+    
    Overrides:
+      object.__init__
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.rocket-module.html
Index: applications/examples/static/epydoc/web2py.gluon.rocket-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.rocket-module.html
@@ -0,0 +1,837 @@
+
+
+
+
+  web2py.gluon.rocket
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module rocket
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module rocket
    source code

    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        NullHandler
    
+      A Logging handler to prevent library errors.
+    
    
+       
+    
+        Connection
+    
    
+       
+    
+        Listener
    
+      The Listener class is a class responsible for accepting 
+        connections and queuing them to be processed by a worker 
+        thread.
+    
    
+       
+    
+        Rocket
    
+      The Rocket class is responsible for handling threads and 
+        accepting and dispatching connections.
+    
    
+       
+    
+        Monitor
+    
    
+       
+    
+        ThreadPool
    
+      The ThreadPool class is a container class for all the worker 
+        threads.
+    
    
+       
+    
+        SSLError
+    
    
+       
+    
+        Headers
+    
    
+       
+    
+        FileWrapper
    
+      Wrapper to convert file-like objects to iterables
+    
    
+       
+    
+        Worker
    
+      The Worker class is a base class responsible for receiving 
+        connections and (a subclass) will run an application to process the
+        the connection
+    
    
+       
+    
+        SocketTimeout
    
+      Exception for when a socket times out between requests.
+    
    
+       
+    
+        BadRequest
    
+      Exception for when a client sends an incomprehensible 
+        request.
+    
    
+       
+    
+        SocketClosed
    
+      Exception for when a socket is closed by the client.
+    
    
+       
+    
+        ChunkedReader
+    
    
+       
+    
+        WSGIWorker
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    b(val)
    
+      Convert string/unicode/bytes literals into bytes.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    u(val,
+        encoding='us-ascii')
    
+      Convert bytes into string/unicode.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    CherryPyWSGIServer(bind_addr,
+        wsgi_app,
+        numthreads=10,
+        server_name=1,
+        max=-1,
+        request_queue_size=5,
+        timeout=10,
+        shutdown_timeout=5)
    
+      A Cherrypy wsgiserver-compatible wrapper.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _formatparam(param,
+        value=1,
+        quote=1)
    
+      Convenience function to format and return a key=value pair.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    get_method(method)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    demo_app(environ,
+        start_response)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    demo()
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        VERSION = '1.2.2'
+    
    
+       
+    
+        SERVER_NAME = 'www'
+    
    
+       
+    
+        SERVER_SOFTWARE = 'Rocket 1.2.2'
+    
    
+       
+    
+        HTTP_SERVER_SOFTWARE = 'Rocket 1.2.2 Python/2.5.2'
+    
    
+       
+    
+        BUF_SIZE = 16384
+    
    
+       
+    
+        SOCKET_TIMEOUT = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        THREAD_STOP_CHECK_INTERVAL = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+       
+    
+        IS_JYTHON = True
+    
    
+       
+    
+        IGNORE_ERRORS_ON_CLOSE = set([103, 104])
+    
    
+       
+    
+        DEFAULT_LISTEN_QUEUE_SIZE = 5
+    
    
+       
+    
+        DEFAULT_MIN_THREADS = 10
+    
    
+       
+    
+        DEFAULT_MAX_THREADS = 0
+    
    
+       
+    
+        DEFAULTS = {'LISTEN_QUEUE_SIZE': 5, 'MAX_THREADS': 0, 'MIN_THR...
+    
    
+       
+    
+        PY3K = True
+    
    
+       
+    
+        has_ssl = True
+    
    
+       
+    
+        log = logging.getLogger('Rocket.Errors.ThreadPool')
+    
    
+       
+    
+        re_SLASH = re.compile(r'(?i)%2F')
+    
    
+       
+    
+        re_REQUEST_LINE = re.compile(r'(?x)^(?P<method>OPTIONS|GET|HEA...
+    
    
+       
+    
+        LOG_LINE = '%(client_ip)s - "%(request_line)s" - %(status)s %(...
+    
    
+       
+    
+        RESPONSE = 'HTTP/1.1 %s\nContent-Length: %i\nContent-Type: %s\...
+    
    
+       
+    
+        HTTP_METHODS = set(['OPTIONS', 'GET', 'HEAD', 'POST', 'PUT', '...
+    
    
+       
+    
+        _tspecials = re.compile(r'[ \(\)<>@,;:\\"/\[\]\?=]')
+    
    
+       
+    
+        NEWLINE = '\r\n'
+    
    
+       
+    
+        HEADER_RESPONSE = 'HTTP/1.1 %s\r\n%s'
+    
    
+       
+    
+        BASE_ENV = {'SCRIPT_NAME': '', 'SERVER_NAME': 'www', 'wsgi.err...
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Function Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    b(val)
+  
    
+      		source code 
+    
    
+  
+  Convert string/unicode/bytes literals into bytes.  This allows for the
+  same code to run on Python 2.x and 3.x.
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    u(val,
+        encoding='us-ascii')
+  
    
+      		source code 
+    
    
+  
+  Convert bytes into string/unicode.  This allows for the same code to 
+  run on Python 2.x and 3.x.
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _formatparam(param,
+        value=1,
+        quote=1)
+  
    
+      		source code 
+    
    
+  
+  
    Convenience function to format and return a key=value pair.
    
+  This will quote the value if needed or if quote is true.
+  
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Variables Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    DEFAULTS
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'LISTEN_QUEUE_SIZE': 5, 'MAX_THREADS': 0, 'MIN_THREADS': 10}
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    re_REQUEST_LINE
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +re.compile(r'(?x)^(?P<method>OPTIONS|GET|HEAD|POST|PUT|DELETE|TRACE|CO\
+NNECT) ((?P<scheme>[^:/]+)(://)(?P<host>[^/]+))?(?P<path>(\*|/[^ \?]*)\
+)(\?(?P<query_string>[^ ]+))? (?P<protocol>HTTPS?/1\.[01])$')
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    LOG_LINE
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +'%(client_ip)s - "%(request_line)s" - %(status)s %(size)s'
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    RESPONSE
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +'''HTTP/1.1 %s
+Content-Length: %i
+Content-Type: %s
+
+%s
+'''
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    HTTP_METHODS
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +set(['OPTIONS', 'GET', 'HEAD', 'POST', 'PUT', 'DELETE', 'TRACE', 'CONN\
+ECT'])
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    BASE_ENV
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +{'SCRIPT_NAME': '',
+ 'SERVER_NAME': 'www',
+ 'wsgi.errors': <epydoc.docintrospecter._DevNull instance at 0x2b630b3\
+2a440>,
+ 'wsgi.file_wrapper': <class web2py.gluon.rocket.FileWrapper at 0x13da\
+350>,
+ 'wsgi.multiprocess': False,
+ 'wsgi.run_once': False,
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.rocket-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.rocket-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.rocket-pysrc.html
@@ -0,0 +1,2594 @@
+
+
+
+
+  web2py.gluon.rocket
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module rocket
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.rocket
    
+
    +   1  # -*- coding: utf-8 -*- 
+   2   
+   3  # This file is part of the Rocket Web Server 
+   4  # Copyright (c) 2010 Timothy Farrell 
+   5   
+   6  # Import System Modules 
+   7  import sys 
+   8  import errno 
+   9  import socket 
+  10  import logging 
+  11  import platform 
+  12   
+  13  # Define Constants 
+  14  VERSION = '1.2.2' 
+  15  SERVER_NAME = socket.gethostname() 
+  16  SERVER_SOFTWARE = 'Rocket %s' % VERSION 
+  17  HTTP_SERVER_SOFTWARE = '%s Python/%s' % (SERVER_SOFTWARE, sys.version.split(' ')[0]) 
+  18  BUF_SIZE = 16384 
+  19  SOCKET_TIMEOUT = 1 # in secs 
+  20  THREAD_STOP_CHECK_INTERVAL = 1 # in secs, How often should threads check for a server stop message? 
+  21  IS_JYTHON = platform.system() == 'Java' # Handle special cases for Jython 
+  22  IGNORE_ERRORS_ON_CLOSE = set([errno.ECONNABORTED, errno.ECONNRESET]) 
+  23  DEFAULT_LISTEN_QUEUE_SIZE = 5 
+  24  DEFAULT_MIN_THREADS = 10 
+  25  DEFAULT_MAX_THREADS = 0 
+  26  DEFAULTS = dict(LISTEN_QUEUE_SIZE = DEFAULT_LISTEN_QUEUE_SIZE, 
+  27                  MIN_THREADS = DEFAULT_MIN_THREADS, 
+  28                  MAX_THREADS = DEFAULT_MAX_THREADS) 
+  29   
+  30  PY3K = sys.version_info[0] > 2 
+  31   
+
      32 -class NullHandler(logging.Handler): 
+
      33      "A Logging handler to prevent library errors." 
+
      34 -    def emit(self, record): 
+
      35          pass 
+
      36   
+  37  if PY3K: 
+
      38 -    def b(val): 
+
      39          """ Convert string/unicode/bytes literals into bytes.  This allows for 
+  40          the same code to run on Python 2.x and 3.x. """ 
+  41          if isinstance(val, str): 
+  42              return val.encode() 
+  43          else: 
+  44              return val 
+
      45   
+
      46 -    def u(val, encoding="us-ascii"): 
+
      47          """ Convert bytes into string/unicode.  This allows for the 
+  48          same code to run on Python 2.x and 3.x. """ 
+  49          if isinstance(val, bytes): 
+  50              return val.decode(encoding) 
+  51          else: 
+  52              return val 
+
      53   
+  54  else: 
+
      55 -    def b(val): 
+
      56          """ Convert string/unicode/bytes literals into bytes.  This allows for 
+  57          the same code to run on Python 2.x and 3.x. """ 
+  58          if isinstance(val, unicode): 
+  59              return val.encode() 
+  60          else: 
+  61              return val 
+
      62   
+
      63 -    def u(val, encoding="us-ascii"): 
+
      64          """ Convert bytes into string/unicode.  This allows for the 
+  65          same code to run on Python 2.x and 3.x. """ 
+  66          if isinstance(val, str): 
+  67              return val.decode(encoding) 
+  68          else: 
+  69              return val 
+
      70   
+  71  # Import Package Modules 
+  72  # package imports removed in monolithic build 
+  73   
+  74  __all__ = ['VERSION', 'SERVER_SOFTWARE', 'HTTP_SERVER_SOFTWARE', 'BUF_SIZE', 
+  75             'IS_JYTHON', 'IGNORE_ERRORS_ON_CLOSE', 'DEFAULTS', 'PY3K', 'b', 'u', 
+  76             'Rocket', 'CherryPyWSGIServer', 'SERVER_NAME', 'NullHandler'] 
+  77   
+  78  # Monolithic build...end of module: rocket\__init__.py 
+  79  # Monolithic build...start of module: rocket\connection.py 
+  80   
+  81  # Import System Modules 
+  82  import sys 
+  83  import time 
+  84  import socket 
+  85  try: 
+  86      import ssl 
+  87      has_ssl = True 
+  88  except ImportError: 
+  89      has_ssl = False 
+  90  # package imports removed in monolithic build 
+  91   
+
      92 -class Connection(object): 
+
      93      __slots__ = [ 
+  94          'setblocking', 
+  95          'sendall', 
+  96          'shutdown', 
+  97          'makefile', 
+  98          'fileno', 
+  99          'client_addr', 
+ 100          'client_port', 
+ 101          'server_port', 
+ 102          'socket', 
+ 103          'start_time', 
+ 104          'ssl', 
+ 105          'secure' 
+ 106      ] 
+ 107   
+
     108 -    def __init__(self, sock_tuple, port, secure=False): 
+
     109          self.client_addr, self.client_port = sock_tuple[1] 
+ 110          self.server_port = port 
+ 111          self.socket = sock_tuple[0] 
+ 112          self.start_time = time.time() 
+ 113          self.ssl = has_ssl and isinstance(self.socket, ssl.SSLSocket) 
+ 114          self.secure = secure 
+ 115   
+ 116          if IS_JYTHON: 
+ 117              # In Jython we must set TCP_NODELAY here since it does not 
+ 118              # inherit from the listening socket. 
+ 119              # See: http://bugs.jython.org/issue1309 
+ 120              self.socket.setsockopt(socket.IPPROTO_TCP, socket.TCP_NODELAY, 1) 
+ 121   
+ 122          self.socket.settimeout(SOCKET_TIMEOUT) 
+ 123   
+ 124          self.sendall = self.socket.sendall 
+ 125          self.shutdown = self.socket.shutdown 
+ 126          self.fileno = self.socket.fileno 
+ 127          self.makefile = self.socket.makefile 
+ 128          self.setblocking = self.socket.setblocking 
+
     129   
+
     130 -    def close(self): 
+
     131          if hasattr(self.socket, '_sock'): 
+ 132              try: 
+ 133                  self.socket._sock.close() 
+ 134              except socket.error: 
+ 135                  info = sys.exc_info() 
+ 136                  if info[1].errno != socket.EBADF: 
+ 137                      raise info[1] 
+ 138                  else: 
+ 139                      pass 
+ 140          self.socket.close() 
+
     141   
+ 142  # Monolithic build...end of module: rocket\connection.py 
+ 143  # Monolithic build...start of module: rocket\listener.py 
+ 144   
+ 145  # Import System Modules 
+ 146  import os 
+ 147  import socket 
+ 148  import logging 
+ 149  import traceback 
+ 150  from threading import Thread 
+ 151   
+ 152  try: 
+ 153      import ssl 
+ 154      from ssl import SSLError 
+ 155      has_ssl = True 
+ 156  except ImportError: 
+ 157      has_ssl = False 
+
     158 -    class SSLError(socket.error): 
+
     159          pass 
+
     160  # Import Package Modules 
+ 161  # package imports removed in monolithic build 
+ 162   
+
     163 -class Listener(Thread): 
+
     164      """The Listener class is a class responsible for accepting connections 
+ 165      and queuing them to be processed by a worker thread.""" 
+ 166   
+
     167 -    def __init__(self, interface, queue_size, active_queue, *args, **kwargs): 
+
     168          Thread.__init__(self, *args, **kwargs) 
+ 169   
+ 170          # Instance variables 
+ 171          self.active_queue = active_queue 
+ 172          self.interface = interface 
+ 173          self.addr = interface[0] 
+ 174          self.port = interface[1] 
+ 175          self.secure = len(interface) == 4 and \ 
+ 176                        os.path.exists(interface[2]) and \ 
+ 177                        os.path.exists(interface[3]) 
+ 178          self.ready = False 
+ 179   
+ 180          # Error Log 
+ 181          self.err_log = logging.getLogger('Rocket.Errors.Port%i' % self.port) 
+ 182          self.err_log.addHandler(NullHandler()) 
+ 183   
+ 184          # Build the socket 
+ 185          listener = socket.socket(socket.AF_INET, socket.SOCK_STREAM) 
+ 186   
+ 187          if not listener: 
+ 188              self.err_log.error("Failed to get socket.") 
+ 189              return 
+ 190   
+ 191          if self.secure: 
+ 192              if not has_ssl: 
+ 193                  self.err_log.error("ssl module required to serve HTTPS.") 
+ 194                  return 
+ 195              elif not os.path.exists(interface[2]): 
+ 196                  data = (interface[2], interface[0], interface[1]) 
+ 197                  self.err_log.error("Cannot find key file " 
+ 198                            "'%s'.  Cannot bind to %s:%s" % data) 
+ 199                  return 
+ 200              elif not os.path.exists(interface[3]): 
+ 201                  data = (interface[3], interface[0], interface[1]) 
+ 202                  self.err_log.error("Cannot find certificate file " 
+ 203                            "'%s'.  Cannot bind to %s:%s" % data) 
+ 204                  return 
+ 205   
+ 206          # Set socket options 
+ 207          try: 
+ 208              listener.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1) 
+ 209          except: 
+ 210              msg = "Cannot share socket.  Using %s:%i exclusively." 
+ 211              self.err_log.warning(msg % (self.addr, self.port)) 
+ 212   
+ 213          try: 
+ 214              if not IS_JYTHON: 
+ 215                  listener.setsockopt(socket.IPPROTO_TCP, 
+ 216                                      socket.TCP_NODELAY, 
+ 217                                      1) 
+ 218          except: 
+ 219              msg = "Cannot set TCP_NODELAY, things might run a little slower" 
+ 220              self.err_log.warning(msg) 
+ 221   
+ 222          try: 
+ 223              listener.bind((self.addr, self.port)) 
+ 224          except: 
+ 225              msg = "Socket %s:%i in use by other process and it won't share." 
+ 226              self.err_log.error(msg % (self.addr, self.port)) 
+ 227          else: 
+ 228              # We want socket operations to timeout periodically so we can 
+ 229              # check if the server is shutting down 
+ 230              listener.settimeout(THREAD_STOP_CHECK_INTERVAL) 
+ 231              # Listen for new connections allowing queue_size number of 
+ 232              # connections to wait before rejecting a connection. 
+ 233              listener.listen(queue_size) 
+ 234   
+ 235              self.listener = listener 
+ 236   
+ 237              self.ready = True 
+
     238   
+
     239 -    def wrap_socket(self, sock): 
+
     240          try: 
+ 241              sock = ssl.wrap_socket(sock, 
+ 242                                     keyfile = self.interface[2], 
+ 243                                     certfile = self.interface[3], 
+ 244                                     server_side = True, 
+ 245                                     ssl_version = ssl.PROTOCOL_SSLv23) 
+ 246          except SSLError: 
+ 247              # Generally this happens when an HTTP request is received on a 
+ 248              # secure socket. We don't do anything because it will be detected 
+ 249              # by Worker and dealt with appropriately. 
+ 250              pass 
+ 251   
+ 252          return sock 
+
     253   
+ 254   
+
     255 -    def run(self): 
+
     256          if not self.ready: 
+ 257              self.err_log.warning('Listener started when not ready.') 
+ 258              return 
+ 259   
+ 260          if __debug__: 
+ 261              self.err_log.debug('Entering main loop.') 
+ 262          while True: 
+ 263              try: 
+ 264                  sock, addr = self.listener.accept() 
+ 265   
+ 266                  if self.secure: 
+ 267                      sock = self.wrap_socket(sock) 
+ 268   
+ 269                  self.active_queue.put(((sock, addr), 
+ 270                                         self.interface[1], 
+ 271                                         self.secure)) 
+ 272   
+ 273              except socket.timeout: 
+ 274                  # socket.timeout will be raised every THREAD_STOP_CHECK_INTERVAL 
+ 275                  # seconds.  When that happens, we check if it's time to die. 
+ 276   
+ 277                  if not self.ready: 
+ 278                      if __debug__: 
+ 279                          self.err_log.debug('Listener exiting.') 
+ 280                      return 
+ 281                  else: 
+ 282                      continue 
+ 283              except: 
+ 284                  self.err_log.error(str(traceback.format_exc())) 
+
     285   
+ 286  # Monolithic build...end of module: rocket\listener.py 
+ 287  # Monolithic build...start of module: rocket\main.py 
+ 288   
+ 289  # Import System Modules 
+ 290  import sys 
+ 291  import time 
+ 292  import socket 
+ 293  import logging 
+ 294  import traceback 
+ 295   
+ 296  try: 
+ 297      from queue import Queue 
+ 298  except ImportError: 
+ 299      from Queue import Queue 
+ 300   
+ 301  # Import Package Modules 
+ 302  # package imports removed in monolithic build 
+ 303   
+ 304   
+ 305   
+ 306   
+ 307   
+ 308  # Setup Logging 
+ 309  log = logging.getLogger('Rocket') 
+ 310  log.addHandler(NullHandler()) 
+ 311   
+
     312 -class Rocket(object): 
+
     313      """The Rocket class is responsible for handling threads and accepting and 
+ 314      dispatching connections.""" 
+ 315   
+
     316 -    def __init__(self, 
+ 317                   interfaces = ('127.0.0.1', 8000), 
+ 318                   method = 'wsgi', 
+ 319                   app_info = None, 
+ 320                   min_threads = None, 
+ 321                   max_threads = None, 
+ 322                   queue_size = None, 
+ 323                   timeout = 600, 
+ 324                   handle_signals = True): 
+
     325   
+ 326          self.handle_signals = handle_signals 
+ 327   
+ 328          if not isinstance(interfaces, list): 
+ 329              self.interfaces = [interfaces] 
+ 330          else: 
+ 331              self.interfaces = interfaces 
+ 332   
+ 333          if min_threads is None: 
+ 334              min_threads = DEFAULTS['MIN_THREADS'] 
+ 335   
+ 336          if max_threads is None: 
+ 337              max_threads = DEFAULTS['MAX_THREADS'] 
+ 338   
+ 339          if not queue_size: 
+ 340              if hasattr(socket, 'SOMAXCONN'): 
+ 341                  queue_size = socket.SOMAXCONN 
+ 342              else: 
+ 343                  queue_size = DEFAULTS['LISTEN_QUEUE_SIZE'] 
+ 344   
+ 345          if max_threads and queue_size > max_threads: 
+ 346              queue_size = max_threads 
+ 347   
+ 348          if isinstance(app_info, dict): 
+ 349              app_info['server_software'] = SERVER_SOFTWARE 
+ 350   
+ 351          monitor_queue = Queue() 
+ 352          active_queue = Queue() 
+ 353   
+ 354          self._monitor = Monitor(monitor_queue, active_queue, timeout) 
+ 355   
+ 356          self._threadpool = ThreadPool(get_method(method), 
+ 357                                        app_info = app_info, 
+ 358                                        active_queue=active_queue, 
+ 359                                        monitor_queue = monitor_queue, 
+ 360                                        min_threads=min_threads, 
+ 361                                        max_threads=max_threads) 
+ 362   
+ 363          # Build our socket listeners 
+ 364          self.listeners = [Listener(i, queue_size, active_queue) for i in self.interfaces] 
+ 365          for ndx in range(len(self.listeners)-1, 0, -1): 
+ 366              if not self.listeners[ndx].ready: 
+ 367                  del self.listeners[ndx] 
+ 368   
+ 369          if not self.listeners: 
+ 370              log.critical("No interfaces to listen on...closing.") 
+ 371              sys.exit(1) 
+
     372   
+
     373 -    def _sigterm(self, signum, frame): 
+
     374          log.info('Received SIGTERM') 
+ 375          self.stop() 
+
     376   
+
     377 -    def _sighup(self, signum, frame): 
+
     378          log.info('Received SIGHUP') 
+ 379          self.restart() 
+
     380   
+
     381 -    def start(self): 
+
     382          log.info('Starting %s' % SERVER_SOFTWARE) 
+ 383   
+ 384          # Set up our shutdown signals 
+ 385          if self.handle_signals: 
+ 386              try: 
+ 387                  import signal 
+ 388                  signal.signal(signal.SIGTERM, self._sigterm) 
+ 389                  signal.signal(signal.SIGUSR1, self._sighup) 
+ 390              except: 
+ 391                  log.debug('This platform does not support signals.') 
+ 392   
+ 393          # Start our worker threads 
+ 394          self._threadpool.start() 
+ 395   
+ 396          # Start our monitor thread 
+ 397          self._monitor.setDaemon(True) 
+ 398          self._monitor.start() 
+ 399   
+ 400          # I know that EXPR and A or B is bad but I'm keeping it for Py2.4 
+ 401          # compatibility. 
+ 402          str_extract = lambda l: (l.addr, l.port, l.secure and '*' or '') 
+ 403   
+ 404          msg = 'Listening on sockets: ' 
+ 405          msg += ', '.join(['%s:%i%s' % str_extract(l) for l in self.listeners]) 
+ 406          log.info(msg) 
+ 407   
+ 408          for l in self.listeners: 
+ 409              l.start() 
+ 410   
+ 411          tp = self._threadpool 
+ 412          dynamic_resize = tp.dynamic_resize 
+ 413   
+ 414          while not tp.stop_server: 
+ 415              try: 
+ 416                  dynamic_resize() 
+ 417                  time.sleep(THREAD_STOP_CHECK_INTERVAL) 
+ 418              except KeyboardInterrupt: 
+ 419                  # Capture a keyboard interrupt when running from a console 
+ 420                  break 
+ 421              except: 
+ 422                  if not tp.stop_server: 
+ 423                      log.error(str(traceback.format_exc())) 
+ 424                      continue 
+ 425   
+ 426          return self.stop() 
+
     427   
+
     428 -    def stop(self, stoplogging = True): 
+
     429          log.info("Stopping Server") 
+ 430   
+ 431          # Stop listeners 
+ 432          for l in self.listeners: 
+ 433              l.ready = False 
+ 434              if l.isAlive(): 
+ 435                  l.join() 
+ 436   
+ 437          # Stop Worker threads 
+ 438          self._threadpool.stop() 
+ 439   
+ 440          # Stop Monitor 
+ 441          self._monitor.stop() 
+ 442          if self._monitor.isAlive(): 
+ 443              self._monitor.join() 
+ 444   
+ 445          if stoplogging: 
+ 446              logging.shutdown() 
+
     447   
+
     448 -    def restart(self): 
+
     449          self.stop(False) 
+ 450          self.start() 
+
     451   
+
     452 -def CherryPyWSGIServer(bind_addr, 
+ 453                         wsgi_app, 
+ 454                         numthreads = 10, 
+ 455                         server_name = None, 
+ 456                         max = -1, 
+ 457                         request_queue_size = 5, 
+ 458                         timeout = 10, 
+ 459                         shutdown_timeout = 5): 
+
     460      """ A Cherrypy wsgiserver-compatible wrapper. """ 
+ 461      max_threads = max 
+ 462      if max_threads < 0: 
+ 463          max_threads = 0 
+ 464      return Rocket(bind_addr, 'wsgi', {'wsgi_app': wsgi_app}, 
+ 465                    min_threads = numthreads, 
+ 466                    max_threads = max_threads, 
+ 467                    queue_size = request_queue_size, 
+ 468                    timeout = timeout) 
+
     469   
+ 470  # Monolithic build...end of module: rocket\main.py 
+ 471  # Monolithic build...start of module: rocket\monitor.py 
+ 472   
+ 473  # Import System Modules 
+ 474  import time 
+ 475  import logging 
+ 476  import select 
+ 477  from threading import Thread 
+ 478   
+ 479  # Import Package Modules 
+ 480  # package imports removed in monolithic build 
+ 481   
+
     482 -class Monitor(Thread): 
+
     483      # Monitor worker class. 
+ 484   
+
     485 -    def __init__(self, 
+ 486                   monitor_queue, 
+ 487                   active_queue, 
+ 488                   timeout, 
+ 489                   *args, 
+ 490                   **kwargs): 
+
     491   
+ 492          Thread.__init__(self, *args, **kwargs) 
+ 493   
+ 494          # Instance Variables 
+ 495          self.monitor_queue = monitor_queue 
+ 496          self.active_queue = active_queue 
+ 497          self.timeout = timeout 
+ 498   
+ 499          self.connections = set() 
+ 500          self.active = False 
+
     501   
+
     502 -    def run(self): 
+
     503          self.name = self.getName() 
+ 504          self.log = logging.getLogger('Rocket.Monitor') 
+ 505          self.log.addHandler(NullHandler()) 
+ 506   
+ 507          self.active = True 
+ 508          conn_list = list() 
+ 509          list_changed = False 
+ 510   
+ 511          if __debug__: 
+ 512              self.log.debug('Entering monitor loop.') 
+ 513   
+ 514          # Enter thread main loop 
+ 515          while self.active: 
+ 516              # Move the queued connections to the selection pool 
+ 517              while not self.monitor_queue.empty() or not len(self.connections): 
+ 518                  if __debug__: 
+ 519                      self.log.debug('In "receive timed-out connections" loop.') 
+ 520   
+ 521                  c = self.monitor_queue.get() 
+ 522   
+ 523                  if c is None: 
+ 524                      # A non-client is a signal to die 
+ 525                      if __debug__: 
+ 526                          self.log.debug('Received a death threat.') 
+ 527                      return 
+ 528   
+ 529                  self.log.debug('Received a timed out connection.') 
+ 530   
+ 531                  if __debug__: 
+ 532                      assert(c not in self.connections) 
+ 533   
+ 534                  if IS_JYTHON: 
+ 535                      # Jython requires a socket to be in Non-blocking mode in 
+ 536                      # order to select on it. 
+ 537                      c.setblocking(False) 
+ 538   
+ 539                  if __debug__: 
+ 540                      self.log.debug('Adding connection to monitor list.') 
+ 541   
+ 542                  self.connections.add(c) 
+ 543                  list_changed = True 
+ 544   
+ 545              # Wait on those connections 
+ 546              self.log.debug('Blocking on connections') 
+ 547              if list_changed: 
+ 548                  conn_list = list(self.connections) 
+ 549                  list_changed = False 
+ 550   
+ 551              try: 
+ 552                  readable = select.select(conn_list, 
+ 553                                           [], 
+ 554                                           [], 
+ 555                                           THREAD_STOP_CHECK_INTERVAL)[0] 
+ 556              except: 
+ 557                  if self.active: 
+ 558                      raise 
+ 559                  else: 
+ 560                      break 
+ 561   
+ 562              # If we have any readable connections, put them back 
+ 563              for r in readable: 
+ 564                  if __debug__: 
+ 565                      self.log.debug('Restoring readable connection') 
+ 566   
+ 567                  if IS_JYTHON: 
+ 568                      # Jython requires a socket to be in Non-blocking mode in 
+ 569                      # order to select on it, but the rest of the code requires 
+ 570                      # that it be in blocking mode. 
+ 571                      r.setblocking(True) 
+ 572   
+ 573                  r.start_time = time.time() 
+ 574                  self.active_queue.put(r) 
+ 575   
+ 576                  self.connections.remove(r) 
+ 577                  list_changed = True 
+ 578   
+ 579              # If we have any stale connections, kill them off. 
+ 580              if self.timeout: 
+ 581                  now = time.time() 
+ 582                  stale = set() 
+ 583                  for c in self.connections: 
+ 584                      if (now - c.start_time) >= self.timeout: 
+ 585                          stale.add(c) 
+ 586   
+ 587                  for c in stale: 
+ 588                      if __debug__: 
+ 589                          # "EXPR and A or B" kept for Py2.4 compatibility 
+ 590                          data = (c.client_addr, c.server_port, c.ssl and '*' or '') 
+ 591                          self.log.debug('Flushing stale connection: %s:%i%s' % data) 
+ 592   
+ 593                      self.connections.remove(c) 
+ 594                      list_changed = True 
+ 595   
+ 596                      try: 
+ 597                          c.close() 
+ 598                      finally: 
+ 599                          del c 
+
     600   
+
     601 -    def stop(self): 
+
     602          self.active = False 
+ 603   
+ 604          if __debug__: 
+ 605              self.log.debug('Flushing waiting connections') 
+ 606   
+ 607          for c in self.connections: 
+ 608              try: 
+ 609                  c.close() 
+ 610              finally: 
+ 611                  del c 
+ 612   
+ 613          if __debug__: 
+ 614              self.log.debug('Flushing queued connections') 
+ 615   
+ 616          while not self.monitor_queue.empty(): 
+ 617              c = self.monitor_queue.get() 
+ 618   
+ 619              if c is None: 
+ 620                  continue 
+ 621   
+ 622              try: 
+ 623                  c.close() 
+ 624              finally: 
+ 625                  del c 
+ 626   
+ 627          # Place a None sentry value to cause the monitor to die. 
+ 628          self.monitor_queue.put(None) 
+
     629   
+ 630  # Monolithic build...end of module: rocket\monitor.py 
+ 631  # Monolithic build...start of module: rocket\threadpool.py 
+ 632   
+ 633  # Import System Modules 
+ 634  import logging 
+ 635  # Import Package Modules 
+ 636  # package imports removed in monolithic build 
+ 637   
+ 638  # Setup Logging 
+ 639  log = logging.getLogger('Rocket.Errors.ThreadPool') 
+ 640  log.addHandler(NullHandler()) 
+ 641   
+
     642 -class ThreadPool: 
+
     643      """The ThreadPool class is a container class for all the worker threads. It 
+ 644      manages the number of actively running threads.""" 
+ 645   
+
     646 -    def __init__(self, 
+ 647                   method, 
+ 648                   app_info, 
+ 649                   active_queue, 
+ 650                   monitor_queue, 
+ 651                   min_threads=DEFAULTS['MIN_THREADS'], 
+ 652                   max_threads=DEFAULTS['MAX_THREADS'], 
+ 653                   ): 
+
     654   
+ 655          if __debug__: 
+ 656              log.debug("Initializing ThreadPool.") 
+ 657   
+ 658          self.check_for_dead_threads = 0 
+ 659          self.active_queue = active_queue 
+ 660   
+ 661          self.worker_class = method 
+ 662          self.min_threads = min_threads 
+ 663          self.max_threads = max_threads 
+ 664          self.monitor_queue = monitor_queue 
+ 665          self.stop_server = False 
+ 666   
+ 667          # TODO - Optimize this based on some real-world usage data 
+ 668          self.grow_threshold = int(max_threads/10) + 2 
+ 669   
+ 670          if not isinstance(app_info, dict): 
+ 671              app_info = dict() 
+ 672   
+ 673          app_info.update(max_threads=max_threads, 
+ 674                          min_threads=min_threads) 
+ 675   
+ 676          self.app_info = app_info 
+ 677   
+ 678          self.threads = set() 
+ 679          for x in range(min_threads): 
+ 680              worker = self.worker_class(app_info, 
+ 681                                         self.active_queue, 
+ 682                                         self.monitor_queue) 
+ 683              self.threads.add(worker) 
+
     684   
+
     685 -    def start(self): 
+
     686          self.stop_server = False 
+ 687          if __debug__: 
+ 688              log.debug("Starting threads.") 
+ 689   
+ 690          for thread in self.threads: 
+ 691              thread.setDaemon(True) 
+ 692              thread.start() 
+
     693   
+
     694 -    def stop(self): 
+
     695          if __debug__: 
+ 696              log.debug("Stopping threads.") 
+ 697   
+ 698          self.stop_server = True 
+ 699   
+ 700          # Prompt the threads to die 
+ 701          for t in self.threads: 
+ 702              self.active_queue.put(None) 
+ 703   
+ 704          # Give them the gun 
+ 705          for t in self.threads: 
+ 706              t.kill() 
+ 707   
+ 708          # Wait until they pull the trigger 
+ 709          for t in self.threads: 
+ 710              t.join() 
+ 711   
+ 712          # Clean up the mess 
+ 713          self.bring_out_your_dead() 
+
     714   
+
     715 -    def bring_out_your_dead(self): 
+
     716          # Remove dead threads from the pool 
+ 717   
+ 718          dead_threads = [t for t in self.threads if not t.isAlive()] 
+ 719          for t in dead_threads: 
+ 720              if __debug__: 
+ 721                  log.debug("Removing dead thread: %s." % t.getName()) 
+ 722              try: 
+ 723                  # Py2.4 complains here so we put it in a try block 
+ 724                  self.threads.remove(t) 
+ 725              except: 
+ 726                  pass 
+ 727          self.check_for_dead_threads -= len(dead_threads) 
+
     728   
+
     729 -    def grow(self, amount=None): 
+
     730          if self.stop_server: 
+ 731              return 
+ 732   
+ 733          if not amount: 
+ 734              amount = self.max_threads 
+ 735   
+ 736          amount = min([amount, self.max_threads - len(self.threads)]) 
+ 737   
+ 738          if __debug__: 
+ 739              log.debug("Growing by %i." % amount) 
+ 740   
+ 741          for x in range(amount): 
+ 742              worker = self.worker_class(self.app_info, 
+ 743                                         self.active_queue, 
+ 744                                         self.monitor_queue) 
+ 745   
+ 746              worker.setDaemon(True) 
+ 747              self.threads.add(worker) 
+ 748              worker.start() 
+
     749   
+
     750 -    def shrink(self, amount=1): 
+
     751          if __debug__: 
+ 752              log.debug("Shrinking by %i." % amount) 
+ 753   
+ 754          self.check_for_dead_threads += amount 
+ 755   
+ 756          for x in range(amount): 
+ 757              self.active_queue.put(None) 
+
     758   
+
     759 -    def dynamic_resize(self): 
+
     760          if (self.max_threads > self.min_threads or self.max_threads == 0): 
+ 761              if self.check_for_dead_threads > 0: 
+ 762                  self.bring_out_your_dead() 
+ 763   
+ 764              queueSize = self.active_queue.qsize() 
+ 765              threadCount = len(self.threads) 
+ 766   
+ 767              if __debug__: 
+ 768                  log.debug("Examining ThreadPool. %i threads and %i Q'd conxions" 
+ 769                            % (threadCount, queueSize)) 
+ 770   
+ 771              if queueSize == 0 and threadCount > self.min_threads: 
+ 772                  self.shrink() 
+ 773   
+ 774              elif queueSize > self.grow_threshold: 
+ 775   
+ 776                  self.grow(queueSize) 
+
     777   
+ 778  # Monolithic build...end of module: rocket\threadpool.py 
+ 779  # Monolithic build...start of module: rocket\worker.py 
+ 780   
+ 781  # Import System Modules 
+ 782  import re 
+ 783  import sys 
+ 784  import socket 
+ 785  import logging 
+ 786  import traceback 
+ 787  #from wsgiref.headers import Headers 
+ 788  from threading import Thread 
+ 789  from datetime import datetime 
+ 790   
+ 791  try: 
+ 792      from urllib import unquote 
+ 793  except ImportError: 
+ 794      from urllib.parse import unquote 
+ 795   
+ 796  try: 
+ 797      from io import StringIO 
+ 798  except ImportError: 
+ 799      try: 
+ 800          from cStringIO import StringIO 
+ 801      except ImportError: 
+ 802          from StringIO import StringIO 
+ 803   
+ 804  try: 
+ 805      from ssl import SSLError 
+ 806  except ImportError: 
+
     807 -    class SSLError(socket.error): 
+
     808          pass 
+
     809  # Import Package Modules 
+ 810  # package imports removed in monolithic build 
+ 811   
+ 812   
+ 813  # Define Constants 
+ 814  re_SLASH = re.compile('%2F', re.IGNORECASE) 
+ 815  re_REQUEST_LINE = re.compile(r"""^ 
+ 816  (?P<method>OPTIONS|GET|HEAD|POST|PUT|DELETE|TRACE|CONNECT)   # Request Method 
+ 817  \                                                            # (single space) 
+ 818  ( 
+ 819      (?P<scheme>[^:/]+)                                       # Scheme 
+ 820      (://)  # 
+ 821      (?P<host>[^/]+)                                          # Host 
+ 822  )? # 
+ 823  (?P<path>(\*|/[^ \?]*))                                      # Path 
+ 824  (\? (?P<query_string>[^ ]+))?                                # Query String 
+ 825  \                                                            # (single space) 
+ 826  (?P<protocol>HTTPS?/1\.[01])                                 # Protocol 
+ 827  $ 
+ 828  """, re.X) 
+ 829  LOG_LINE = '%(client_ip)s - "%(request_line)s" - %(status)s %(size)s' 
+ 830  RESPONSE = '''\ 
+ 831  HTTP/1.1 %s 
+ 832  Content-Length: %i 
+ 833  Content-Type: %s 
+ 834   
+ 835  %s 
+ 836  ''' 
+ 837  if IS_JYTHON: 
+ 838      HTTP_METHODS = set(['OPTIONS', 'GET', 'HEAD', 'POST', 'PUT', 'DELETE', 'TRACE', 'CONNECT']) 
+ 839   
+ 840  ### 
+ 841  # The Headers and FileWrapper classes are ripped straight from the Python 
+ 842  # Standard Library. I've removed some docstrings and integrated my BUF_SIZE. 
+ 843  # See the Python License here: http://docs.python.org/license.html 
+ 844  ### 
+ 845   
+ 846  # Regular expression that matches `special' characters in parameters, the 
+ 847  # existance of which force quoting of the parameter value. 
+ 848  import re 
+ 849  _tspecials = re.compile(r'[ \(\)<>@,;:\\"/\[\]\?=]') 
+ 850   
+
     851 -def _formatparam(param, value=None, quote=1): 
+
     852      """Convenience function to format and return a key=value pair. 
+ 853   
+ 854      This will quote the value if needed or if quote is true. 
+ 855      """ 
+ 856      if value is not None and len(value) > 0: 
+ 857          if quote or _tspecials.search(value): 
+ 858              value = value.replace('\\', '\\\\').replace('"', r'\"') 
+ 859              return '%s="%s"' % (param, value) 
+ 860          else: 
+ 861              return '%s=%s' % (param, value) 
+ 862      else: 
+ 863          return param 
+
     864   
+
     865 -class Headers: 
+
     866 -    def __init__(self,headers): 
+
     867          if type(headers) is not type([]): 
+ 868              raise TypeError("Headers must be a list of name/value tuples") 
+ 869          self._headers = headers 
+
     870   
+
     871 -    def __len__(self): 
+
     872          return len(self._headers) 
+
     873   
+
     874 -    def __setitem__(self, name, val): 
+
     875          del self[name] 
+ 876          self._headers.append((name, val)) 
+
     877   
+
     878 -    def __delitem__(self,name): 
+
     879          name = name.lower() 
+ 880          self._headers[:] = [kv for kv in self._headers if kv[0].lower() != name] 
+
     881   
+
     882 -    def __getitem__(self,name): 
+
     883          return self.get(name) 
+
     884   
+
     885 -    def has_key(self, name): 
+
     886          return self.get(name) is not None 
+
     887   
+ 888      __contains__ = has_key 
+ 889   
+
     890 -    def get_all(self, name): 
+
     891          name = name.lower() 
+ 892          return [kv[1] for kv in self._headers if kv[0].lower()==name] 
+
     893   
+
     894 -    def get(self,name,default=None): 
+
     895          name = name.lower() 
+ 896          for k,v in self._headers: 
+ 897              if k.lower()==name: 
+ 898                  return v 
+ 899          return default 
+
     900   
+
     901 -    def keys(self): 
+
     902          return [k for k, v in self._headers] 
+
     903   
+
     904 -    def values(self): 
+
     905          return [v for k, v in self._headers] 
+
     906   
+
     907 -    def items(self): 
+
     908          return self._headers[:] 
+
     909   
+
     910 -    def __repr__(self): 
+
     911          return "Headers(%r)" % self._headers 
+
     912   
+
     913 -    def __str__(self): 
+
     914          return '\r\n'.join(["%s: %s" % kv for kv in self._headers]+['','']) 
+
     915   
+
     916 -    def setdefault(self,name,value): 
+
     917          result = self.get(name) 
+ 918          if result is None: 
+ 919              self._headers.append((name,value)) 
+ 920              return value 
+ 921          else: 
+ 922              return result 
+
     923   
+ 924   
+
     925 -    def add_header(self, _name, _value, **_params): 
+
     926          parts = [] 
+ 927          if _value is not None: 
+ 928              parts.append(_value) 
+ 929          for k, v in _params.items(): 
+ 930              if v is None: 
+ 931                  parts.append(k.replace('_', '-')) 
+ 932              else: 
+ 933                  parts.append(_formatparam(k.replace('_', '-'), v)) 
+ 934          self._headers.append((_name, "; ".join(parts))) 
+
     935   
+
     936 -class FileWrapper: 
+
     937      """Wrapper to convert file-like objects to iterables""" 
+ 938   
+
     939 -    def __init__(self, filelike, blksize=BUF_SIZE): 
+
     940          self.filelike = filelike 
+ 941          self.blksize = blksize 
+ 942          if hasattr(filelike,'close'): 
+ 943              self.close = filelike.close 
+
     944   
+
     945 -    def __getitem__(self,key): 
+
     946          data = self.filelike.read(self.blksize) 
+ 947          if data: 
+ 948              return data 
+ 949          raise IndexError 
+
     950   
+
     951 -    def __iter__(self): 
+
     952          return self 
+
     953   
+
     954 -    def next(self): 
+
     955          data = self.filelike.read(self.blksize) 
+ 956          if data: 
+ 957              return data 
+ 958          raise StopIteration 
+
     959   
+
     960 -class Worker(Thread): 
+
     961      """The Worker class is a base class responsible for receiving connections 
+ 962      and (a subclass) will run an application to process the the connection """ 
+ 963   
+
     964 -    def __init__(self, 
+ 965                   app_info, 
+ 966                   active_queue, 
+ 967                   monitor_queue, 
+ 968                   *args, 
+ 969                   **kwargs): 
+
     970   
+ 971          Thread.__init__(self, *args, **kwargs) 
+ 972   
+ 973          # Instance Variables 
+ 974          self.app_info = app_info 
+ 975          self.active_queue = active_queue 
+ 976          self.monitor_queue = monitor_queue 
+ 977   
+ 978          self.size = 0 
+ 979          self.status = "200 OK" 
+ 980          self.closeConnection = True 
+ 981   
+ 982          # Request Log 
+ 983          self.req_log = logging.getLogger('Rocket.Requests') 
+ 984          self.req_log.addHandler(NullHandler()) 
+ 985   
+ 986          # Error Log 
+ 987          self.err_log = logging.getLogger('Rocket.Errors.'+self.getName()) 
+ 988          self.err_log.addHandler(NullHandler()) 
+
     989   
+
     990 -    def _handleError(self, typ, val, tb): 
+
     991          if typ == SSLError: 
+ 992              if 'timed out' in val.args[0]: 
+ 993                  typ = SocketTimeout 
+ 994          if typ == SocketTimeout: 
+ 995              if __debug__: 
+ 996                  self.err_log.debug('Socket timed out') 
+ 997              self.monitor_queue.put(self.conn) 
+ 998              return True 
+ 999          if typ == SocketClosed: 
+1000              self.closeConnection = True 
+1001              if __debug__: 
+1002                  self.err_log.debug('Client closed socket') 
+1003              return False 
+1004          if typ == BadRequest: 
+1005              self.closeConnection = True 
+1006              if __debug__: 
+1007                  self.err_log.debug('Client sent a bad request') 
+1008              return True 
+1009          if typ == socket.error: 
+1010              self.closeConnection = True 
+1011              if val.args[0] in IGNORE_ERRORS_ON_CLOSE: 
+1012                  if __debug__: 
+1013                      self.err_log.debug('Ignorable socket Error received...' 
+1014                                         'closing connection.') 
+1015                  return False 
+1016              else: 
+1017                  self.status = "999 Utter Server Failure" 
+1018                  tb_fmt = traceback.format_exception(typ, val, tb) 
+1019                  self.err_log.error('Unhandled Error when serving ' 
+1020                                     'connection:\n' + '\n'.join(tb_fmt)) 
+1021                  return False 
+1022   
+1023          self.closeConnection = True 
+1024          tb_fmt = traceback.format_exception(typ, val, tb) 
+1025          self.err_log.error('\n'.join(tb_fmt)) 
+1026          self.send_response('500 Server Error') 
+1027          return False 
+
    1028   
+
    1029 -    def run(self): 
+
    1030          if __debug__: 
+1031              self.err_log.debug('Entering main loop.') 
+1032   
+1033          # Enter thread main loop 
+1034          while True: 
+1035              conn = self.active_queue.get() 
+1036   
+1037              if not conn: 
+1038                  # A non-client is a signal to die 
+1039                  if __debug__: 
+1040                      self.err_log.debug('Received a death threat.') 
+1041                  return conn 
+1042   
+1043              if isinstance(conn, tuple): 
+1044                  conn = Connection(*conn) 
+1045   
+1046              self.conn = conn 
+1047   
+1048              if conn.ssl != conn.secure: 
+1049                  self.err_log.info('Received HTTP connection on HTTPS port.') 
+1050                  self.send_response('400 Bad Request') 
+1051                  self.closeConnection = True 
+1052                  conn.close() 
+1053                  continue 
+1054              else: 
+1055                  if __debug__: 
+1056                      self.err_log.debug('Received a connection.') 
+1057                  self.closeConnection = False 
+1058   
+1059              # Enter connection serve loop 
+1060              while True: 
+1061                  if __debug__: 
+1062                      self.err_log.debug('Serving a request') 
+1063                  try: 
+1064                      self.run_app(conn) 
+1065                      log_info = dict(client_ip = conn.client_addr, 
+1066                                      time = datetime.now().strftime('%c'), 
+1067                                      status = self.status.split(' ')[0], 
+1068                                      size = self.size, 
+1069                                      request_line = self.request_line) 
+1070                      self.req_log.info(LOG_LINE % log_info) 
+1071                  except: 
+1072                      exc = sys.exc_info() 
+1073                      handled = self._handleError(*exc) 
+1074                      if handled: 
+1075                          break 
+1076                      else: 
+1077                          if self.request_line: 
+1078                              log_info = dict(client_ip = conn.client_addr, 
+1079                                              time = datetime.now().strftime('%c'), 
+1080                                              status = self.status.split(' ')[0], 
+1081                                              size = self.size, 
+1082                                              request_line = self.request_line + ' - not stopping') 
+1083                              self.req_log.info(LOG_LINE % log_info) 
+1084   
+1085                  if self.closeConnection: 
+1086                      try: 
+1087                          conn.close() 
+1088                      except: 
+1089                          self.err_log.error(str(traceback.format_exc())) 
+1090   
+1091                      break 
+
    1092   
+
    1093 -    def run_app(self, conn): 
+
    1094          # Must be overridden with a method reads the request from the socket 
+1095          # and sends a response. 
+1096          self.closeConnection = True 
+1097          raise NotImplementedError('Overload this method!') 
+
    1098   
+
    1099 -    def send_response(self, status): 
+
    1100          stat_msg = status.split(' ', 1)[1] 
+1101          msg = RESPONSE % (status, 
+1102                            len(stat_msg), 
+1103                            'text/plain', 
+1104                            stat_msg) 
+1105          try: 
+1106              self.conn.sendall(b(msg)) 
+1107          except socket.error: 
+1108              self.closeConnection = True 
+1109              self.err_log.error('Tried to send "%s" to client but received socket' 
+1110                             ' error' % status) 
+
    1111   
+
    1112 -    def kill(self): 
+
    1113          if self.isAlive() and hasattr(self, 'conn'): 
+1114              try: 
+1115                  self.conn.shutdown(socket.SHUT_RDWR) 
+1116              except socket.error: 
+1117                  info = sys.exc_info() 
+1118                  if info[1].args[0] != socket.EBADF: 
+1119                      self.err_log.debug('Error on shutdown: '+str(info)) 
+
    1120   
+
    1121 -    def read_request_line(self, sock_file): 
+
    1122          self.request_line = '' 
+1123          try: 
+1124              # Grab the request line 
+1125              d = sock_file.readline() 
+1126              if PY3K: 
+1127                  d = d.decode('ISO-8859-1') 
+1128   
+1129              if d == '\r\n': 
+1130                  # Allow an extra NEWLINE at the beginning per HTTP 1.1 spec 
+1131                  if __debug__: 
+1132                      self.err_log.debug('Client sent newline') 
+1133   
+1134                  d = sock_file.readline() 
+1135                  if PY3K: 
+1136                      d = d.decode('ISO-8859-1') 
+1137          except socket.timeout: 
+1138              raise SocketTimeout("Socket timed out before request.") 
+1139   
+1140          d = d.strip() 
+1141   
+1142          if not d: 
+1143              if __debug__: 
+1144                  self.err_log.debug('Client did not send a recognizable request.') 
+1145              raise SocketClosed('Client closed socket.') 
+1146   
+1147          self.request_line = d 
+1148   
+1149          # NOTE: I've replaced the traditional method of procedurally breaking 
+1150          # apart the request line with a (rather unsightly) regular expression. 
+1151          # However, Java's regexp support sucks so bad that it actually takes 
+1152          # longer in Jython to process the regexp than procedurally. So I've 
+1153          # left the old code here for Jython's sake...for now. 
+1154          if IS_JYTHON: 
+1155              return self._read_request_line_jython(d) 
+1156   
+1157          match = re_REQUEST_LINE.match(d) 
+1158   
+1159          if not match: 
+1160              self.send_response('400 Bad Request') 
+1161              raise BadRequest 
+1162   
+1163          req = match.groupdict() 
+1164          for k,v in req.items(): 
+1165              if not v: 
+1166                  req[k] = "" 
+1167              if k == 'path': 
+1168                  req['path'] = r'%2F'.join([unquote(x) for x in re_SLASH.split(v)]) 
+1169   
+1170          return req 
+
    1171   
+
    1172 -    def _read_request_line_jython(self, d): 
+
    1173          d = d.strip() 
+1174          try: 
+1175              method, uri, proto = d.split(' ') 
+1176              if not proto.startswith('HTTP') or \ 
+1177                 proto[-3:] not in ('1.0', '1.1') or \ 
+1178                 method not in HTTP_METHODS: 
+1179                  self.send_response('400 Bad Request') 
+1180                  raise BadRequest 
+1181          except ValueError: 
+1182              self.send_response('400 Bad Request') 
+1183              raise BadRequest 
+1184   
+1185          req = dict(method=method, protocol = proto) 
+1186          scheme = '' 
+1187          host = '' 
+1188          if uri == '*' or uri.startswith('/'): 
+1189              path = uri 
+1190          elif '://' in uri: 
+1191              scheme, rest = uri.split('://') 
+1192              host, path = rest.split('/', 1) 
+1193              path = '/' + path 
+1194          else: 
+1195              self.send_response('400 Bad Request') 
+1196              raise BadRequest 
+1197   
+1198          query_string = '' 
+1199          if '?' in path: 
+1200              path, query_string = path.split('?', 1) 
+1201   
+1202          path = r'%2F'.join([unquote(x) for x in re_SLASH.split(path)]) 
+1203   
+1204          req.update(path=path, 
+1205                     query_string=query_string, 
+1206                     scheme=scheme.lower(), 
+1207                     host=host) 
+1208          return req 
+
    1209   
+1210   
+
    1211 -    def read_headers(self, sock_file): 
+
    1212          headers = dict() 
+1213          l = sock_file.readline() 
+1214   
+1215          lname = None 
+1216          lval = None 
+1217          while True: 
+1218              if PY3K: 
+1219                  try: 
+1220                      l = str(l, 'ISO-8859-1') 
+1221                  except UnicodeDecodeError: 
+1222                      self.err_log.warning('Client sent invalid header: ' + repr(l)) 
+1223   
+1224              if l == '\r\n': 
+1225                  break 
+1226   
+1227              if l[0] in ' \t' and lname: 
+1228                  # Some headers take more than one line 
+1229                  lval += ',' + l.strip() 
+1230              else: 
+1231                  # HTTP header values are latin-1 encoded 
+1232                  l = l.split(':', 1) 
+1233                  # HTTP header names are us-ascii encoded 
+1234   
+1235                  lname = l[0].strip().upper().replace('-', '_') 
+1236                  lval = l[-1].strip() 
+1237              headers[str(lname)] = str(lval) 
+1238   
+1239              l = sock_file.readline() 
+1240          return headers 
+
    1241   
+
    1242 -class SocketTimeout(Exception): 
+
    1243      "Exception for when a socket times out between requests." 
+1244      pass 
+
    1245   
+
    1246 -class BadRequest(Exception): 
+
    1247      "Exception for when a client sends an incomprehensible request." 
+1248      pass 
+
    1249   
+
    1250 -class SocketClosed(Exception): 
+
    1251      "Exception for when a socket is closed by the client." 
+1252      pass 
+
    1253   
+
    1254 -class ChunkedReader(object): 
+
    1255 -    def __init__(self, sock_file): 
+
    1256          self.stream = sock_file 
+1257          self.chunk_size = 0 
+
    1258   
+
    1259 -    def _read_header(self): 
+
    1260          chunk_len = "" 
+1261          try: 
+1262              while "" == chunk_len: 
+1263                  chunk_len = self.stream.readline().strip() 
+1264              return int(chunk_len, 16) 
+1265          except ValueError: 
+1266              return 0 
+
    1267   
+
    1268 -    def read(self, size): 
+
    1269          data = b('') 
+1270          chunk_size = self.chunk_size 
+1271          while size: 
+1272              if not chunk_size: 
+1273                  chunk_size = self._read_header() 
+1274   
+1275              if size < chunk_size: 
+1276                  data += self.stream.read(size) 
+1277                  chunk_size -= size 
+1278                  break 
+1279              else: 
+1280                  if not chunk_size: 
+1281                      break 
+1282                  data += self.stream.read(chunk_size) 
+1283                  size -= chunk_size 
+1284                  chunk_size = 0 
+1285   
+1286          self.chunk_size = chunk_size 
+1287          return data 
+
    1288   
+
    1289 -    def readline(self): 
+
    1290          data = b('') 
+1291          c = self.read(1) 
+1292          while c and c != b('\n'): 
+1293              data += c 
+1294              c = self.read(1) 
+1295          data += c 
+1296          return data 
+
    1297   
+
    1298 -    def readlines(self): 
+
    1299          yield self.readline() 
+
    1300   
+
    1301 -def get_method(method): 
+
    1302   
+1303      methods = dict(wsgi=WSGIWorker) 
+1304      return methods[method.lower()] 
+
    1305   
+1306  # Monolithic build...end of module: rocket\worker.py 
+1307  # Monolithic build...start of module: rocket\methods\__init__.py 
+1308   
+1309  # Monolithic build...end of module: rocket\methods\__init__.py 
+1310  # Monolithic build...start of module: rocket\methods\wsgi.py 
+1311   
+1312  # Import System Modules 
+1313  import sys 
+1314  import socket 
+1315  #from wsgiref.headers import Headers 
+1316  #from wsgiref.util import FileWrapper 
+1317  # Import Package Modules 
+1318  # package imports removed in monolithic build 
+1319   
+1320   
+1321  if PY3K: 
+1322      from email.utils import formatdate 
+1323  else: 
+1324      # Caps Utils for Py2.4 compatibility 
+1325      from email.Utils import formatdate 
+1326   
+1327  # Define Constants 
+1328  NEWLINE = b('\r\n') 
+1329  HEADER_RESPONSE = '''HTTP/1.1 %s\r\n%s''' 
+1330  BASE_ENV = {'SERVER_NAME': SERVER_NAME, 
+1331              'SCRIPT_NAME': '',  # Direct call WSGI does not need a name 
+1332              'wsgi.errors': sys.stderr, 
+1333              'wsgi.version': (1, 0), 
+1334              'wsgi.multiprocess': False, 
+1335              'wsgi.run_once': False, 
+1336              'wsgi.file_wrapper': FileWrapper 
+1337              } 
+1338   
+
    1339 -class WSGIWorker(Worker): 
+
    1340 -    def __init__(self, *args, **kwargs): 
+
    1341          """Builds some instance variables that will last the life of the 
+1342          thread.""" 
+1343          Worker.__init__(self, *args, **kwargs) 
+1344   
+1345          if isinstance(self.app_info, dict): 
+1346              multithreaded = self.app_info.get('max_threads') != 1 
+1347          else: 
+1348              multithreaded = False 
+1349          self.base_environ = dict({'SERVER_SOFTWARE': self.app_info['server_software'], 
+1350                                    'wsgi.multithread': multithreaded, 
+1351                                    }) 
+1352          self.base_environ.update(BASE_ENV) 
+1353          # Grab our application 
+1354          self.app = self.app_info.get('wsgi_app') 
+1355   
+1356          if not hasattr(self.app, "__call__"): 
+1357              raise TypeError("The wsgi_app specified (%s) is not a valid WSGI application." % repr(self.app)) 
+
    1358   
+1359   
+
    1360 -    def build_environ(self, sock_file, conn): 
+
    1361          """ Build the execution environment. """ 
+1362          # Grab the request line 
+1363          request = self.read_request_line(sock_file) 
+1364   
+1365          # Copy the Base Environment 
+1366          environ = self.base_environ.copy() 
+1367   
+1368          # Grab the headers 
+1369          for k, v in self.read_headers(sock_file).items(): 
+1370              environ[str('HTTP_'+k)] = v 
+1371   
+1372          # Add CGI Variables 
+1373          environ['REQUEST_METHOD'] = request['method'] 
+1374          environ['PATH_INFO'] = request['path'] 
+1375          environ['SERVER_PROTOCOL'] = request['protocol'] 
+1376          environ['SERVER_PORT'] = str(conn.server_port) 
+1377          environ['REMOTE_PORT'] = str(conn.client_port) 
+1378          environ['REMOTE_ADDR'] = str(conn.client_addr) 
+1379          environ['QUERY_STRING'] = request['query_string'] 
+1380          if 'HTTP_CONTENT_LENGTH' in environ: 
+1381              environ['CONTENT_LENGTH'] = environ['HTTP_CONTENT_LENGTH'] 
+1382          if 'HTTP_CONTENT_TYPE' in environ: 
+1383              environ['CONTENT_TYPE'] = environ['HTTP_CONTENT_TYPE'] 
+1384   
+1385          # Save the request method for later 
+1386          self.request_method = environ['REQUEST_METHOD'] 
+1387   
+1388          # Add Dynamic WSGI Variables 
+1389          if conn.ssl: 
+1390              environ['wsgi.url_scheme'] = 'https' 
+1391              environ['HTTPS'] = 'on' 
+1392          else: 
+1393              environ['wsgi.url_scheme'] = 'http' 
+1394   
+1395          if environ.get('HTTP_TRANSFER_ENCODING', '') == 'chunked': 
+1396              environ['wsgi.input'] = ChunkedReader(sock_file) 
+1397          else: 
+1398              environ['wsgi.input'] = sock_file 
+1399   
+1400          return environ 
+
    1401   
+
    1402 -    def send_headers(self, data, sections): 
+
    1403          h_set = self.header_set 
+1404   
+1405          # Does the app want us to send output chunked? 
+1406          self.chunked = h_set.get('transfer-encoding', '').lower() == 'chunked' 
+1407   
+1408          # Add a Date header if it's not there already 
+1409          if not 'date' in h_set: 
+1410              h_set['Date'] = formatdate(usegmt=True) 
+1411   
+1412          # Add a Server header if it's not there already 
+1413          if not 'server' in h_set: 
+1414              h_set['Server'] = HTTP_SERVER_SOFTWARE 
+1415   
+1416          if 'content-length' in h_set: 
+1417              self.size = int(h_set['content-length']) 
+1418          else: 
+1419              s = int(self.status.split(' ')[0]) 
+1420              if s < 200 or s not in (204, 205, 304): 
+1421                  if not self.chunked: 
+1422                      if sections == 1: 
+1423                          # Add a Content-Length header if it's not there already 
+1424                          h_set['Content-Length'] = str(len(data)) 
+1425                          self.size = len(data) 
+1426                      else: 
+1427                          # If they sent us more than one section, we blow chunks 
+1428                          h_set['Transfer-Encoding'] = 'Chunked' 
+1429                          self.chunked = True 
+1430                          if __debug__: 
+1431                              self.err_log.debug('Adding header...' 
+1432                                                 'Transfer-Encoding: Chunked') 
+1433   
+1434          if 'connection' not in h_set: 
+1435              # If the application did not provide a connection header, fill it in 
+1436              client_conn = self.environ.get('HTTP_CONNECTION', '').lower() 
+1437              if self.environ['SERVER_PROTOCOL'] == 'HTTP/1.1': 
+1438                  # HTTP = 1.1 defaults to keep-alive connections 
+1439                  if client_conn: 
+1440                      h_set['Connection'] = client_conn 
+1441                  else: 
+1442                      h_set['Connection'] = 'keep-alive' 
+1443              else: 
+1444                  # HTTP < 1.1 supports keep-alive but it's quirky so we don't support it 
+1445                  h_set['Connection'] = 'close' 
+1446   
+1447          # Close our connection if we need to. 
+1448          self.closeConnection = h_set.get('connection', '').lower() == 'close' 
+1449   
+1450          # Build our output headers 
+1451          header_data = HEADER_RESPONSE % (self.status, str(h_set)) 
+1452   
+1453          # Send the headers 
+1454          if __debug__: 
+1455              self.err_log.debug('Sending Headers: %s' % repr(header_data)) 
+1456          self.conn.sendall(b(header_data)) 
+1457          self.headers_sent = True 
+
    1458   
+
    1459 -    def write_warning(self, data, sections=None): 
+
    1460          self.err_log.warning('WSGI app called write method directly.  This is ' 
+1461                               'deprecated behavior.  Please update your app.') 
+1462          return self.write(data, sections) 
+
    1463   
+
    1464 -    def write(self, data, sections=None): 
+
    1465          """ Write the data to the output socket. """ 
+1466   
+1467          if self.error[0]: 
+1468              self.status = self.error[0] 
+1469              data = b(self.error[1]) 
+1470   
+1471          if not self.headers_sent: 
+1472              self.send_headers(data, sections) 
+1473   
+1474          if self.request_method != 'HEAD': 
+1475              try: 
+1476                  if self.chunked: 
+1477                      self.conn.sendall(b('%x\r\n%s\r\n' % (len(data), data))) 
+1478                  else: 
+1479                      self.conn.sendall(data) 
+1480              except socket.error: 
+1481                  # But some clients will close the connection before that 
+1482                  # resulting in a socket error. 
+1483                  self.closeConnection = True 
+
    1484   
+
    1485 -    def start_response(self, status, response_headers, exc_info=None): 
+
    1486          """ Store the HTTP status and headers to be sent when self.write is 
+1487          called. """ 
+1488          if exc_info: 
+1489              try: 
+1490                  if self.headers_sent: 
+1491                      # Re-raise original exception if headers sent 
+1492                      # because this violates WSGI specification. 
+1493                      raise 
+1494              finally: 
+1495                  exc_info = None 
+1496          elif self.header_set: 
+1497              raise AssertionError("Headers already set!") 
+1498   
+1499          if PY3K and not isinstance(status, str): 
+1500              self.status = str(status, 'ISO-8859-1') 
+1501          else: 
+1502              self.status = status 
+1503          # Make sure headers are bytes objects 
+1504          try: 
+1505              self.header_set = Headers(response_headers) 
+1506          except UnicodeDecodeError: 
+1507              self.error = ('500 Internal Server Error', 
+1508                            'HTTP Headers should be bytes') 
+1509              self.err_log.error('Received HTTP Headers from client that contain' 
+1510                                 ' invalid characters for Latin-1 encoding.') 
+1511   
+1512          return self.write_warning 
+
    1513   
+
    1514 -    def run_app(self, conn): 
+
    1515          self.size = 0 
+1516          self.header_set = Headers([]) 
+1517          self.headers_sent = False 
+1518          self.error = (None, None) 
+1519          self.chunked = False 
+1520          sections = None 
+1521          output = None 
+1522   
+1523          if __debug__: 
+1524              self.err_log.debug('Getting sock_file') 
+1525   
+1526          # Build our file-like object 
+1527          sock_file = conn.makefile('rb',BUF_SIZE) 
+1528   
+1529          try: 
+1530              # Read the headers and build our WSGI environment 
+1531              self.environ = environ = self.build_environ(sock_file, conn) 
+1532   
+1533              # Handle 100 Continue 
+1534              if environ.get('HTTP_EXPECT', '') == '100-continue': 
+1535                  res = environ['SERVER_PROTOCOL'] + ' 100 Continue\r\n\r\n' 
+1536                  conn.sendall(b(res)) 
+1537   
+1538              # Send it to our WSGI application 
+1539              output = self.app(environ, self.start_response) 
+1540   
+1541              if not hasattr(output, '__len__') and not hasattr(output, '__iter__'): 
+1542                  self.error = ('500 Internal Server Error', 
+1543                                'WSGI applications must return a list or ' 
+1544                                'generator type.') 
+1545   
+1546              if hasattr(output, '__len__'): 
+1547                  sections = len(output) 
+1548   
+1549              for data in output: 
+1550                  # Don't send headers until body appears 
+1551                  if data: 
+1552                      self.write(data, sections) 
+1553   
+1554              if self.chunked: 
+1555                  # If chunked, send our final chunk length 
+1556                  self.conn.sendall(b('0\r\n\r\n')) 
+1557              elif not self.headers_sent: 
+1558                  # Send headers if the body was empty 
+1559                  self.send_headers('', sections) 
+1560   
+1561          # Don't capture exceptions here.  The Worker class handles 
+1562          # them appropriately. 
+1563          finally: 
+1564              if __debug__: 
+1565                  self.err_log.debug('Finally closing output and sock_file') 
+1566   
+1567              if hasattr(output,'close'): 
+1568                  output.close() 
+1569   
+1570              sock_file.close() 
+
    1571   
+1572  # Monolithic build...end of module: rocket\methods\wsgi.py 
+1573   
+1574  # 
+1575  # the following code is not part of Rocket but was added in web2py for testing purposes 
+1576  # 
+1577   
+
    1578 -def demo_app(environ, start_response): 
+
    1579      global static_folder 
+1580      import os 
+1581      types = {'htm': 'text/html','html': 'text/html','gif': 'image/gif', 
+1582               'jpg': 'image/jpeg','png': 'image/png','pdf': 'applications/pdf'} 
+1583      if static_folder: 
+1584          if not static_folder.startswith('/'): 
+1585              static_folder = os.path.join(os.getcwd(),static_folder) 
+1586          path = os.path.join(static_folder, environ['PATH_INFO'][1:] or 'index.html') 
+1587          type = types.get(path.split('.')[-1],'text') 
+1588          if os.path.exists(path): 
+1589              try: 
+1590                  pathfile = open(path,'rb') 
+1591                  try: 
+1592                      data = pathfile.read() 
+1593                  finally: 
+1594                      pathfile.close() 
+1595                  start_response('200 OK', [('Content-Type', type)]) 
+1596              except IOError: 
+1597                  start_response('404 NOT FOUND', []) 
+1598                  data = '404 NOT FOUND' 
+1599          else: 
+1600              start_response('500 INTERNAL SERVER ERROR', []) 
+1601              data = '500 INTERNAL SERVER ERROR' 
+1602      else: 
+1603          start_response('200 OK', [('Content-Type', 'text/html')]) 
+1604          data = '<html><body><h1>Hello from Rocket Web Server</h1></body></html>' 
+1605      return [data] 
+
    1606   
+
    1607 -def demo(): 
+
    1608      from optparse import OptionParser 
+1609      parser = OptionParser() 
+1610      parser.add_option("-i", "--ip", dest="ip",default="127.0.0.1", 
+1611                        help="ip address of the network interface") 
+1612      parser.add_option("-p", "--port", dest="port",default="8000", 
+1613                        help="post where to run web server") 
+1614      parser.add_option("-s", "--static", dest="static",default=None, 
+1615                        help="folder containing static files") 
+1616      (options, args) = parser.parse_args() 
+1617      global static_folder 
+1618      static_folder = options.static 
+1619      print 'Rocket running on %s:%s' % (options.ip, options.port) 
+1620      r=Rocket((options.ip,int(options.port)),'wsgi', {'wsgi_app':demo_app}) 
+1621      r.start() 
+
    1622   
+1623  if __name__=='__main__': 
+1624      demo() 
+1625   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:04 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.rocket.BadRequest-class.html
Index: applications/examples/static/epydoc/web2py.gluon.rocket.BadRequest-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.rocket.BadRequest-class.html
@@ -0,0 +1,199 @@
+
+
+
+
+  web2py.gluon.rocket.BadRequest
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module rocket ::
+        Class BadRequest
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class BadRequest
    source code

    
+
    +              object --+        
+                       |        
+exceptions.BaseException --+    
+                           |    
+        exceptions.Exception --+
+                               |
+                              BadRequest
+
    
+
+
    
+Exception for when a client sends an incomprehensible request.

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.Exception:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.rocket.ChunkedReader-class.html
Index: applications/examples/static/epydoc/web2py.gluon.rocket.ChunkedReader-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.rocket.ChunkedReader-class.html
@@ -0,0 +1,310 @@
+
+
+
+
+  web2py.gluon.rocket.ChunkedReader
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module rocket ::
+        Class ChunkedReader
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class ChunkedReader
    source code

    
+
    +object --+
+         |
+        ChunkedReader
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        sock_file)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _read_header(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    read(self,
+        size)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    readline(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    readlines(self)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        sock_file)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.rocket.Connection-class.html
Index: applications/examples/static/epydoc/web2py.gluon.rocket.Connection-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.rocket.Connection-class.html
@@ -0,0 +1,349 @@
+
+
+
+
+  web2py.gluon.rocket.Connection
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module rocket ::
+        Class Connection
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Connection
    source code

    
+
    +object --+
+         |
+        Connection
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        sock_tuple,
+        port,
+        secure=True)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    close(self)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+       
+    
+        client_addr
+    
    
+       
+    
+        client_port
+    
    
+       
+    
+        fileno
+    
    
+       
+    
+        makefile
+    
    
+       
+    
+        secure
+    
    
+       
+    
+        sendall
+    
    
+       
+    
+        server_port
+    
    
+       
+    
+        setblocking
+    
    
+       
+    
+        shutdown
+    
    
+       
+    
+        socket
+    
    
+       
+    
+        ssl
+    
    
+       
+    
+        start_time
+    
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        sock_tuple,
+        port,
+        secure=True)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.rocket.FileWrapper-class.html
Index: applications/examples/static/epydoc/web2py.gluon.rocket.FileWrapper-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.rocket.FileWrapper-class.html
@@ -0,0 +1,203 @@
+
+
+
+
+  web2py.gluon.rocket.FileWrapper
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module rocket ::
+        Class FileWrapper
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class FileWrapper
    source code

    
+Wrapper to convert file-like objects to iterables

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        filelike,
+        blksize=16384)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getitem__(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __iter__(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    next(self)
+            source code
+            
+          
    
+      
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.rocket.Headers-class.html
Index: applications/examples/static/epydoc/web2py.gluon.rocket.Headers-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.rocket.Headers-class.html
@@ -0,0 +1,405 @@
+
+
+
+
+  web2py.gluon.rocket.Headers
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module rocket ::
+        Class Headers
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Headers
    source code

    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        headers)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __len__(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __setitem__(self,
+        name,
+        val)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __delitem__(self,
+        name)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getitem__(self,
+        name)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    has_key(self,
+        name)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __contains__(self,
+        name)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    get_all(self,
+        name)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    get(self,
+        name,
+        default=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    keys(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    values(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    items(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __repr__(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __str__(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    setdefault(self,
+        name,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    add_header(self,
+        _name,
+        _value,
+        **_params)
+            source code
+            
+          
    
+      
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.rocket.Listener-class.html
Index: applications/examples/static/epydoc/web2py.gluon.rocket.Listener-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.rocket.Listener-class.html
@@ -0,0 +1,326 @@
+
+
+
+
+  web2py.gluon.rocket.Listener
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module rocket ::
+        Class Listener
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Listener
    source code

    
+
    +        object --+        
+                 |        
+threading._Verbose --+    
+                     |    
+      threading.Thread --+
+                         |
+                        Listener
+
    
+
+
    
+The Listener class is a class responsible for accepting connections 
+  and queuing them to be processed by a worker thread.

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        interface,
+        queue_size,
+        active_queue,
+        *args,
+        **kwargs)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    wrap_socket(self,
+        sock)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    run(self)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from threading.Thread:
+      __repr__,
+      getName,
+      isAlive,
+      isDaemon,
+      join,
+      setDaemon,
+      setName,
+      start
+      
    
+    
        
    Inherited from threading.Thread (private):
+      _set_daemon
+      
    
+    
        
    Inherited from threading._Verbose (private):
+      _note
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        interface,
+        queue_size,
+        active_queue,
+        *args,
+        **kwargs)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      threading.Thread.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    run(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      threading.Thread.run
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.rocket.Monitor-class.html
Index: applications/examples/static/epydoc/web2py.gluon.rocket.Monitor-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.rocket.Monitor-class.html
@@ -0,0 +1,322 @@
+
+
+
+
+  web2py.gluon.rocket.Monitor
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module rocket ::
+        Class Monitor
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Monitor
    source code

    
+
    +        object --+        
+                 |        
+threading._Verbose --+    
+                     |    
+      threading.Thread --+
+                         |
+                        Monitor
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        monitor_queue,
+        active_queue,
+        timeout,
+        *args,
+        **kwargs)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    run(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    stop(self)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from threading.Thread:
+      __repr__,
+      getName,
+      isAlive,
+      isDaemon,
+      join,
+      setDaemon,
+      setName,
+      start
+      
    
+    
        
    Inherited from threading.Thread (private):
+      _set_daemon
+      
    
+    
        
    Inherited from threading._Verbose (private):
+      _note
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        monitor_queue,
+        active_queue,
+        timeout,
+        *args,
+        **kwargs)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      threading.Thread.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    run(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      threading.Thread.run
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.rocket.NullHandler-class.html
Index: applications/examples/static/epydoc/web2py.gluon.rocket.NullHandler-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.rocket.NullHandler-class.html
@@ -0,0 +1,231 @@
+
+
+
+
+  web2py.gluon.rocket.NullHandler
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module rocket ::
+        Class NullHandler
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class NullHandler
    source code

    
+
    +logging.Filterer --+    
+                   |    
+     logging.Handler --+
+                       |
+                      NullHandler
+
    
+
+
    
+A Logging handler to prevent library errors.

    
+
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    emit(self,
+        record)
    
+      Do whatever it takes to actually log the specified logging 
+      record.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from logging.Handler:
+      __init__,
+      acquire,
+      close,
+      createLock,
+      flush,
+      format,
+      handle,
+      handleError,
+      release,
+      setFormatter,
+      setLevel
+      
    
+    
    Inherited from logging.Filterer:
+      addFilter,
+      filter,
+      removeFilter
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    emit(self,
+        record)
+  
    
+      		source code 
+    
    
+  
+  
    Do whatever it takes to actually log the specified logging record.
    
+  This version is intended to be implemented by subclasses and so raises
+  a NotImplementedError.
+  
    
+    
    Overrides:
+      logging.Handler.emit
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.rocket.Rocket-class.html
Index: applications/examples/static/epydoc/web2py.gluon.rocket.Rocket-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.rocket.Rocket-class.html
@@ -0,0 +1,347 @@
+
+
+
+
+  web2py.gluon.rocket.Rocket
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module rocket ::
+        Class Rocket
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Rocket
    source code

    
+
    +object --+
+         |
+        Rocket
+
    
+
+
    
+The Rocket class is responsible for handling threads and accepting and
+  dispatching connections.

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        interfaces=('127.0.0.1', 8000),
+        method='wsgi',
+        app_info=1,
+        min_threads=1,
+        max_threads=1,
+        queue_size=1,
+        timeout=600,
+        handle_signals=True)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _sigterm(self,
+        signum,
+        frame)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _sighup(self,
+        signum,
+        frame)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    start(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    stop(self,
+        stoplogging=True)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    restart(self)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        interfaces=('127.0.0.1', 8000),
+        method='wsgi',
+        app_info=1,
+        min_threads=1,
+        max_threads=1,
+        queue_size=1,
+        timeout=600,
+        handle_signals=True)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.rocket.SSLError-class.html
Index: applications/examples/static/epydoc/web2py.gluon.rocket.SSLError-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.rocket.SSLError-class.html
@@ -0,0 +1,199 @@
+
+
+
+
+  web2py.gluon.rocket.SSLError
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module rocket ::
+        Class SSLError
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class SSLError
    source code

    
+
    +              object --+            
+                       |            
+exceptions.BaseException --+        
+                           |        
+        exceptions.Exception --+    
+                               |    
+                    socket.error --+
+                                   |
+                                  SSLError
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.Exception:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.rocket.SocketClosed-class.html
Index: applications/examples/static/epydoc/web2py.gluon.rocket.SocketClosed-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.rocket.SocketClosed-class.html
@@ -0,0 +1,199 @@
+
+
+
+
+  web2py.gluon.rocket.SocketClosed
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module rocket ::
+        Class SocketClosed
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class SocketClosed
    source code

    
+
    +              object --+        
+                       |        
+exceptions.BaseException --+    
+                           |    
+        exceptions.Exception --+
+                               |
+                              SocketClosed
+
    
+
+
    
+Exception for when a socket is closed by the client.

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.Exception:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.rocket.SocketTimeout-class.html
Index: applications/examples/static/epydoc/web2py.gluon.rocket.SocketTimeout-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.rocket.SocketTimeout-class.html
@@ -0,0 +1,199 @@
+
+
+
+
+  web2py.gluon.rocket.SocketTimeout
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module rocket ::
+        Class SocketTimeout
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class SocketTimeout
    source code

    
+
    +              object --+        
+                       |        
+exceptions.BaseException --+    
+                           |    
+        exceptions.Exception --+
+                               |
+                              SocketTimeout
+
    
+
+
    
+Exception for when a socket times out between requests.

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from exceptions.Exception:
+      __init__,
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.rocket.ThreadPool-class.html
Index: applications/examples/static/epydoc/web2py.gluon.rocket.ThreadPool-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.rocket.ThreadPool-class.html
@@ -0,0 +1,257 @@
+
+
+
+
+  web2py.gluon.rocket.ThreadPool
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module rocket ::
+        Class ThreadPool
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class ThreadPool
    source code

    
+The ThreadPool class is a container class for all the worker threads. 
+  It manages the number of actively running threads.

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        method,
+        app_info,
+        active_queue,
+        monitor_queue,
+        min_threads=10,
+        max_threads=0)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    start(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    stop(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    bring_out_your_dead(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    grow(self,
+        amount=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    shrink(self,
+        amount=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    dynamic_resize(self)
+            source code
+            
+          
    
+      
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.rocket.WSGIWorker-class.html
Index: applications/examples/static/epydoc/web2py.gluon.rocket.WSGIWorker-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.rocket.WSGIWorker-class.html
@@ -0,0 +1,413 @@
+
+
+
+
+  web2py.gluon.rocket.WSGIWorker
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module rocket ::
+        Class WSGIWorker
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class WSGIWorker
    source code

    
+
    +        object --+            
+                 |            
+threading._Verbose --+        
+                     |        
+      threading.Thread --+    
+                         |    
+                    Worker --+
+                             |
+                            WSGIWorker
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        *args,
+        **kwargs)
    
+      Builds some instance variables that will last the life of the 
+      thread.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    build_environ(self,
+        sock_file,
+        conn)
    
+      Build the execution environment.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    send_headers(self,
+        data,
+        sections)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    write_warning(self,
+        data,
+        sections=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    write(self,
+        data,
+        sections=1)
    
+      Write the data to the output socket.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    start_response(self,
+        status,
+        response_headers,
+        exc_info=1)
    
+      Store the HTTP status and headers to be sent when self.write is 
+      called.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    run_app(self,
+        conn)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Worker:
+      kill,
+      read_headers,
+      read_request_line,
+      run,
+      send_response
+      
    
+    
        
    Inherited from Worker (private):
+      _handleError,
+      _read_request_line_jython
+      
    
+    
    Inherited from threading.Thread:
+      __repr__,
+      getName,
+      isAlive,
+      isDaemon,
+      join,
+      setDaemon,
+      setName,
+      start
+      
    
+    
        
    Inherited from threading.Thread (private):
+      _set_daemon
+      
    
+    
        
    Inherited from threading._Verbose (private):
+      _note
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        *args,
+        **kwargs)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  Builds some instance variables that will last the life of the 
+  thread.
+  
    
+    
    Overrides:
+      Worker.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    run_app(self,
+        conn)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      Worker.run_app
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.rocket.Worker-class.html
Index: applications/examples/static/epydoc/web2py.gluon.rocket.Worker-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.rocket.Worker-class.html
@@ -0,0 +1,435 @@
+
+
+
+
+  web2py.gluon.rocket.Worker
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module rocket ::
+        Class Worker
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Worker
    source code

    
+
    +        object --+        
+                 |        
+threading._Verbose --+    
+                     |    
+      threading.Thread --+
+                         |
+                        Worker
+
    
+
+
    Known Subclasses:
    
+
    
+    WSGIWorker
+
    
+
+
    
+The Worker class is a base class responsible for receiving connections
+  and (a subclass) will run an application to process the the 
+  connection

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        app_info,
+        active_queue,
+        monitor_queue,
+        *args,
+        **kwargs)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _handleError(self,
+        typ,
+        val,
+        tb)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    run(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    run_app(self,
+        conn)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    send_response(self,
+        status)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    kill(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    read_request_line(self,
+        sock_file)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _read_request_line_jython(self,
+        d)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    read_headers(self,
+        sock_file)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from threading.Thread:
+      __repr__,
+      getName,
+      isAlive,
+      isDaemon,
+      join,
+      setDaemon,
+      setName,
+      start
+      
    
+    
        
    Inherited from threading.Thread (private):
+      _set_daemon
+      
    
+    
        
    Inherited from threading._Verbose (private):
+      _note
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        app_info,
+        active_queue,
+        monitor_queue,
+        *args,
+        **kwargs)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      threading.Thread.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    run(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      threading.Thread.run
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sanitizer-module.html
Index: applications/examples/static/epydoc/web2py.gluon.sanitizer-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sanitizer-module.html
@@ -0,0 +1,203 @@
+
+
+
+
+  web2py.gluon.sanitizer
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sanitizer
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module sanitizer
    source code

    
+:
+
    +   # from http://aspn.activestate.com/ASPN/Cookbook/Python/Recipe/496942
+   # Title: Cross-site scripting (XSS) defense
+   # Submitter: Josh Goldfoot (other recipes)
+   # Last Updated: 2006/08/05
+   # Version no: 1.0
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        XssCleaner
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    xssescape(text)
    
+      Gets rid of < and > and & and, for good measure, :    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    sanitize(text,
+        permitted_tags=['a', 'b', 'blockquote', 'br/', 'i', 'li', 'ol', 'ul', 'p', 'c...,
+        allowed_attributes={'a': ['href', 'title'], 'blockquote': ['type'], 'img': ['src'...,
+        escape=True)
+            source code
+            
+          
    
+      
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sanitizer-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.sanitizer-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sanitizer-pysrc.html
@@ -0,0 +1,1384 @@
+
+
+
+
+  web2py.gluon.sanitizer
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sanitizer
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.sanitizer
    
+
    +  1  #!/usr/bin/env python 
+  2  # -*- coding: utf-8 -*- 
+  3   
+  4  """ 
+  5  :: 
+  6   
+  7      # from http://aspn.activestate.com/ASPN/Cookbook/Python/Recipe/496942 
+  8      # Title: Cross-site scripting (XSS) defense 
+  9      # Submitter: Josh Goldfoot (other recipes) 
+ 10      # Last Updated: 2006/08/05 
+ 11      # Version no: 1.0 
+ 12   
+ 13  """ 
+ 14   
+ 15   
+ 16  from htmllib import HTMLParser 
+ 17  from cgi import escape 
+ 18  from urlparse import urlparse 
+ 19  from formatter import AbstractFormatter 
+ 20  from htmlentitydefs import entitydefs 
+ 21  from xml.sax.saxutils import quoteattr 
+ 22   
+ 23  __all__ = ['sanitize'] 
+ 24   
+ 25   
+
     26 -def xssescape(text): 
+
     27      """Gets rid of < and > and & and, for good measure, :""" 
+ 28   
+ 29      return escape(text, quote=True).replace(':', '&#58;') 
+
     30   
+ 31   
+
     32 -class XssCleaner(HTMLParser): 
+
     33   
+
     34 -    def __init__( 
+ 35          self, 
+ 36          permitted_tags=[ 
+ 37              'a', 
+ 38              'b', 
+ 39              'blockquote', 
+ 40              'br/', 
+ 41              'i', 
+ 42              'li', 
+ 43              'ol', 
+ 44              'ul', 
+ 45              'p', 
+ 46              'cite', 
+ 47              'code', 
+ 48              'pre', 
+ 49              'img/', 
+ 50              ], 
+ 51          allowed_attributes={'a': ['href', 'title'], 'img': ['src', 'alt' 
+ 52                              ], 'blockquote': ['type']}, 
+ 53          fmt=AbstractFormatter, 
+ 54          strip_disallowed = False 
+ 55          ): 
+
     56   
+ 57          HTMLParser.__init__(self, fmt) 
+ 58          self.result = '' 
+ 59          self.open_tags = [] 
+ 60          self.permitted_tags = [i for i in permitted_tags if i[-1] != '/'] 
+ 61          self.requires_no_close = [i[:-1] for i in permitted_tags 
+ 62                                    if i[-1] == '/'] 
+ 63          self.permitted_tags += self.requires_no_close 
+ 64          self.allowed_attributes = allowed_attributes 
+ 65   
+ 66          # The only schemes allowed in URLs (for href and src attributes). 
+ 67          # Adding "javascript" or "vbscript" to this list would not be smart. 
+ 68   
+ 69          self.allowed_schemes = ['http', 'https', 'ftp'] 
+ 70   
+ 71          #to strip or escape disallowed tags? 
+ 72          self.strip_disallowed = strip_disallowed 
+ 73          self.in_disallowed = False 
+
     74   
+
     75 -    def handle_data(self, data): 
+
     76          if data and not self.in_disallowed: 
+ 77              self.result += xssescape(data) 
+
     78   
+
     79 -    def handle_charref(self, ref): 
+
     80          if self.in_disallowed: 
+ 81              return 
+ 82          elif len(ref) < 7 and ref.isdigit(): 
+ 83              self.result += '&#%s;' % ref 
+ 84          else: 
+ 85              self.result += xssescape('&#%s' % ref) 
+
     86   
+
     87 -    def handle_entityref(self, ref): 
+
     88          if self.in_disallowed: 
+ 89              return 
+ 90          elif ref in entitydefs: 
+ 91              self.result += '&%s;' % ref 
+ 92          else: 
+ 93              self.result += xssescape('&%s' % ref) 
+
     94   
+
     95 -    def handle_comment(self, comment): 
+
     96          if self.in_disallowed: 
+ 97              return 
+ 98          elif comment: 
+ 99              self.result += xssescape('<!--%s-->' % comment) 
+
    100   
+
    101 -    def handle_starttag( 
+102          self, 
+103          tag, 
+104          method, 
+105          attrs, 
+106          ): 
+
    107          if tag not in self.permitted_tags: 
+108              if self.strip_disallowed: 
+109                  self.in_disallowed = True 
+110              else: 
+111                  self.result += xssescape('<%s>' % tag) 
+112          else: 
+113              bt = '<' + tag 
+114              if tag in self.allowed_attributes: 
+115                  attrs = dict(attrs) 
+116                  self.allowed_attributes_here = [x for x in 
+117                          self.allowed_attributes[tag] if x in attrs 
+118                           and len(attrs[x]) > 0] 
+119                  for attribute in self.allowed_attributes_here: 
+120                      if attribute in ['href', 'src', 'background']: 
+121                          if self.url_is_acceptable(attrs[attribute]): 
+122                              bt += ' %s="%s"' % (attribute, 
+123                                      attrs[attribute]) 
+124                      else: 
+125                          bt += ' %s=%s' % (xssescape(attribute), 
+126                                  quoteattr(attrs[attribute])) 
+127              if bt == '<a' or bt == '<img': 
+128                  return 
+129              if tag in self.requires_no_close: 
+130                  bt += ' /' 
+131              bt += '>' 
+132              self.result += bt 
+133              self.open_tags.insert(0, tag) 
+
    134   
+
    135 -    def handle_endtag(self, tag, attrs): 
+
    136          bracketed = '</%s>' % tag 
+137          if tag not in self.permitted_tags: 
+138              if self.strip_disallowed: 
+139                  self.in_disallowed = False 
+140              else: 
+141                  self.result += xssescape(bracketed) 
+142          elif tag in self.open_tags: 
+143              self.result += bracketed 
+144              self.open_tags.remove(tag) 
+
    145   
+
    146 -    def unknown_starttag(self, tag, attributes): 
+
    147          self.handle_starttag(tag, None, attributes) 
+
    148   
+
    149 -    def unknown_endtag(self, tag): 
+
    150          self.handle_endtag(tag, None) 
+
    151   
+
    152 -    def url_is_acceptable(self, url): 
+
    153          """ 
+154          Accepts relative and absolute urls 
+155          """ 
+156   
+157          parsed = urlparse(url) 
+158          return (parsed[0] in self.allowed_schemes and '.' in parsed[1]) \ 
+159              or (parsed[0] == '' and parsed[2].startswith('/')) 
+
    160   
+
    161 -    def strip(self, rawstring, escape=True): 
+
    162          """ 
+163          Returns the argument stripped of potentially harmful 
+164          HTML or Javascript code 
+165   
+166          @type escape: boolean 
+167          @param escape: If True (default) it escapes the potentially harmful 
+168            content, otherwise remove it 
+169          """ 
+170   
+171          if not isinstance(rawstring, str): return str(rawstring) 
+172          for tag in self.requires_no_close: 
+173              rawstring = rawstring.replace("<%s/>" % tag, "<%s />" % tag) 
+174          if not escape: 
+175              self.strip_disallowed = True 
+176          self.result = '' 
+177          self.feed(rawstring) 
+178          for endtag in self.open_tags: 
+179              if endtag not in self.requires_no_close: 
+180                  self.result += '</%s>' % endtag 
+181          return self.result 
+
    182   
+
    183 -    def xtags(self): 
+
    184          """ 
+185          Returns a printable string informing the user which tags are allowed 
+186          """ 
+187   
+188          tg = '' 
+189          for x in sorted(self.permitted_tags): 
+190              tg += '<' + x 
+191              if x in self.allowed_attributes: 
+192                  for y in self.allowed_attributes[x]: 
+193                      tg += ' %s=""' % y 
+194              tg += '> ' 
+195          return xssescape(tg.strip()) 
+
    196   
+197   
+
    198 -def sanitize(text, permitted_tags=[ 
+199          'a', 
+200          'b', 
+201          'blockquote', 
+202          'br/', 
+203          'i', 
+204          'li', 
+205          'ol', 
+206          'ul', 
+207          'p', 
+208          'cite', 
+209          'code', 
+210          'pre', 
+211          'img/', 
+212          'h1','h2','h3','h4','h5','h6', 
+213          'table','tr','td','div', 
+214          ], 
+215               allowed_attributes = { 
+216          'a': ['href', 'title'], 
+217          'img': ['src', 'alt'], 
+218          'blockquote': ['type'], 
+219          'td': ['colspan'], 
+220          }, 
+221               escape=True): 
+
    222      if not isinstance(text, str): return str(text) 
+223      return XssCleaner(permitted_tags=permitted_tags, 
+224                        allowed_attributes=allowed_attributes).strip(text, escape) 
+
    225   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:04 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sanitizer.XssCleaner-class.html
Index: applications/examples/static/epydoc/web2py.gluon.sanitizer.XssCleaner-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sanitizer.XssCleaner-class.html
@@ -0,0 +1,788 @@
+
+
+
+
+  web2py.gluon.sanitizer.XssCleaner
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sanitizer ::
+        Class XssCleaner
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class XssCleaner
    source code

    
+
    +markupbase.ParserBase --+        
+                        |        
+       sgmllib.SGMLParser --+    
+                            |    
+           htmllib.HTMLParser --+
+                                |
+                               XssCleaner
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        permitted_tags=['a', 'b', 'blockquote', 'br/', 'i', 'li', 'ol', 'ul', 'p', 'c...,
+        allowed_attributes={'a': ['href', 'title'], 'blockquote': ['type'], 'img': ['src'...,
+        fmt=<class formatter.AbstractFormatter at 0xa77cb0>,
+        strip_disallowed=True)
    
+      Creates an instance of the HTMLParser class.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    handle_data(self,
+        data)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    handle_charref(self,
+        ref)
    
+      Handle character reference, no need to override.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    handle_entityref(self,
+        ref)
    
+      Handle entity references, no need to override.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    handle_comment(self,
+        comment)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    handle_starttag(self,
+        tag,
+        method,
+        attrs)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    handle_endtag(self,
+        tag,
+        attrs)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    unknown_starttag(self,
+        tag,
+        attributes)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    unknown_endtag(self,
+        tag)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    url_is_acceptable(self,
+        url)
    
+      Accepts relative and absolute urls    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    strip(self,
+        rawstring,
+        escape=True)
    
+      Returns the argument stripped of potentially harmful HTML or 
+      Javascript code    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    xtags(self)
    
+      Returns a printable string informing the user which tags are 
+      allowed    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from htmllib.HTMLParser:
+      anchor_bgn,
+      anchor_end,
+      ddpop,
+      do_base,
+      do_br,
+      do_dd,
+      do_dt,
+      do_hr,
+      do_img,
+      do_isindex,
+      do_li,
+      do_link,
+      do_meta,
+      do_nextid,
+      do_p,
+      do_plaintext,
+      end_a,
+      end_address,
+      end_b,
+      end_blockquote,
+      end_body,
+      end_cite,
+      end_code,
+      end_dir,
+      end_dl,
+      end_em,
+      end_h1,
+      end_h2,
+      end_h3,
+      end_h4,
+      end_h5,
+      end_h6,
+      end_head,
+      end_html,
+      end_i,
+      end_kbd,
+      end_listing,
+      end_menu,
+      end_ol,
+      end_pre,
+      end_samp,
+      end_strong,
+      end_title,
+      end_tt,
+      end_ul,
+      end_var,
+      end_xmp,
+      error,
+      handle_image,
+      reset,
+      save_bgn,
+      save_end,
+      start_a,
+      start_address,
+      start_b,
+      start_blockquote,
+      start_body,
+      start_cite,
+      start_code,
+      start_dir,
+      start_dl,
+      start_em,
+      start_h1,
+      start_h2,
+      start_h3,
+      start_h4,
+      start_h5,
+      start_h6,
+      start_head,
+      start_html,
+      start_i,
+      start_kbd,
+      start_listing,
+      start_menu,
+      start_ol,
+      start_pre,
+      start_samp,
+      start_strong,
+      start_title,
+      start_tt,
+      start_ul,
+      start_var,
+      start_xmp
+      
    
+    
    Inherited from sgmllib.SGMLParser:
+      close,
+      convert_charref,
+      convert_codepoint,
+      convert_entityref,
+      feed,
+      finish_endtag,
+      finish_shorttag,
+      finish_starttag,
+      get_starttag_text,
+      goahead,
+      handle_decl,
+      handle_pi,
+      parse_endtag,
+      parse_pi,
+      parse_starttag,
+      report_unbalanced,
+      setliteral,
+      setnomoretags,
+      unknown_charref,
+      unknown_entityref
+      
    
+    
        
    Inherited from sgmllib.SGMLParser (private):
+      _convert_ref
+      
    
+    
    Inherited from markupbase.ParserBase:
+      getpos,
+      parse_comment,
+      parse_declaration,
+      parse_marked_section,
+      unknown_decl,
+      updatepos
+      
    
+    
        
    Inherited from markupbase.ParserBase (private):
+      _parse_doctype_attlist,
+      _parse_doctype_element,
+      _parse_doctype_entity,
+      _parse_doctype_notation,
+      _parse_doctype_subset,
+      _scan_name
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+    
    Inherited from sgmllib.SGMLParser:
+      entity_or_charref
+      
    
+    
        
    Inherited from sgmllib.SGMLParser (private):
+      _decl_otherchars
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        permitted_tags=['a', 'b', 'blockquote', 'br/', 'i', 'li', 'ol', 'ul', 'p', 'c...,
+        allowed_attributes={'a': ['href', 'title'], 'blockquote': ['type'], 'img': ['src'...,
+        fmt=<class formatter.AbstractFormatter at 0xa77cb0>,
+        strip_disallowed=True)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
    Creates an instance of the HTMLParser class.
    
+  The formatter parameter is the formatter instance associated with the 
+  parser.
+  
    
+    
    Overrides:
+      htmllib.HTMLParser.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    handle_data(self,
+        data)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      htmllib.HTMLParser.handle_data
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    handle_charref(self,
+        ref)
+  
    
+      		source code 
+    
    
+  
+  Handle character reference, no need to override.
+  
    
+    
    Overrides:
+      sgmllib.SGMLParser.handle_charref
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    handle_entityref(self,
+        ref)
+  
    
+      		source code 
+    
    
+  
+  Handle entity references, no need to override.
+  
    
+    
    Overrides:
+      sgmllib.SGMLParser.handle_entityref
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    handle_comment(self,
+        comment)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      sgmllib.SGMLParser.handle_comment
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    handle_starttag(self,
+        tag,
+        method,
+        attrs)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      sgmllib.SGMLParser.handle_starttag
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    handle_endtag(self,
+        tag,
+        attrs)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      sgmllib.SGMLParser.handle_endtag
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    unknown_starttag(self,
+        tag,
+        attributes)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      htmllib.HTMLParser.unknown_starttag
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    unknown_endtag(self,
+        tag)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      htmllib.HTMLParser.unknown_endtag
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    strip(self,
+        rawstring,
+        escape=True)
+  
    
+      		source code 
+    
    
+  
+  Returns the argument stripped of potentially harmful HTML or 
+  Javascript code
+  
    
+    
    Parameters:
    
+    
      
+        
    • escape (boolean) - If True (default) it escapes the potentially harmful content, 
+          otherwise remove it
      • 
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.serializers-module.html
Index: applications/examples/static/epydoc/web2py.gluon.serializers-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.serializers-module.html
@@ -0,0 +1,237 @@
+
+
+
+
+  web2py.gluon.serializers
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module serializers
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module serializers
    source code

    
+This file is part of the web2py Web Framework Copyrighted by Massimo 
+  Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    custom_json(o)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    xml_rec(value,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    xml(value,
+        encoding='UTF-8',
+        key='document')
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    json(value,
+        default=<function custom_json at 0xc0db18>)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    csv(value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    rss(feed)
+            source code
+            
+          
    
+      
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.serializers-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.serializers-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.serializers-pysrc.html
@@ -0,0 +1,215 @@
+
+
+
+
+  web2py.gluon.serializers
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module serializers
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.serializers
    
+
    + 1  """ 
+ 2  This file is part of the web2py Web Framework 
+ 3  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+ 4  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+ 5  """ 
+ 6  import datetime 
+ 7  from storage import Storage 
+ 8  from html import TAG 
+ 9  from html import xmlescape 
+10  from languages import lazyT 
+11  import contrib.simplejson as simplejson 
+12  import contrib.rss2 as rss2 
+13   
+
    14 -def custom_json(o): 
+
    15      if hasattr(o,'custom_json') and callable(o.custom_json): 
+16          return o.custom_json() 
+17      if isinstance(o, (datetime.date, 
+18                        datetime.datetime, 
+19                        datetime.time)): 
+20          return o.isoformat()[:19].replace('T',' ') 
+21      elif isinstance(o, (int, long)): 
+22          return int(o) 
+23      elif isinstance(o, lazyT): 
+24          return str(o) 
+25      elif hasattr(o,'as_list') and callable(o.as_list): 
+26          return o.as_list() 
+27      elif hasattr(o,'as_dict') and callable(o.as_dict): 
+28          return o.as_dict() 
+29      else: 
+30          raise TypeError(repr(o) + " is not JSON serializable") 
+
    31   
+32   
+
    33 -def xml_rec(value, key): 
+
    34      if hasattr(value,'custom_xml') and callable(value.custom_xml): 
+35          return value.custom_xml() 
+36      elif isinstance(value, (dict, Storage)): 
+37          return TAG[key](*[TAG[k](xml_rec(v, '')) for k, v in value.items()]) 
+38      elif isinstance(value, list): 
+39          return TAG[key](*[TAG.item(xml_rec(item, '')) for item in value]) 
+40      elif hasattr(value,'as_list') and callable(value.as_list): 
+41          return str(xml_rec(value.as_list(),'')) 
+42      elif hasattr(value,'as_dict') and callable(value.as_dict): 
+43          return str(xml_rec(value.as_dict(),'')) 
+44      else: 
+45          return xmlescape(value) 
+
    46   
+47   
+
    48 -def xml(value, encoding='UTF-8', key='document'): 
+
    49      return ('<?xml version="1.0" encoding="%s"?>' % encoding) + str(xml_rec(value,key)) 
+
    50   
+51   
+
    52 -def json(value,default=custom_json): 
+
    53      return simplejson.dumps(value,default=default) 
+
    54   
+55   
+
    56 -def csv(value): 
+
    57      return '' 
+
    58   
+59   
+
    60 -def rss(feed): 
+
    61      if not 'entries' in feed and 'items' in feed: 
+62          feed['entries'] = feed['items'] 
+63      now=datetime.datetime.now() 
+64      rss = rss2.RSS2(title = feed['title'], 
+65                      link = str(feed['link']), 
+66                      description = feed['description'], 
+67                      lastBuildDate = feed.get('created_on', now), 
+68                      items = [rss2.RSSItem(\ 
+69                                          title=entry['title'], 
+70                                          link=str(entry['link']), 
+71                                          description=entry['description'], 
+72                                          pubDate=entry.get('created_on', now) 
+73                                          )\ 
+74                                      for entry in feed['entries'] 
+75                                      ] 
+76                      ) 
+77      return rss2.dumps(rss) 
+
    78   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:05 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.settings-module.html
Index: applications/examples/static/epydoc/web2py.gluon.settings-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.settings-module.html
@@ -0,0 +1,214 @@
+
+
+
+
+  web2py.gluon.settings
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module settings
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module settings
    source code

    
+This file is part of the web2py Web Framework Copyrighted by Massimo 
+  Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        global_settings = <Storage {'debugging': False, 'gluon_parent'...
+    
    
+       
+    
+        settings = <Storage {'debugging': False, 'gluon_parent': '/hom...
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Variables Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    global_settings
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +<Storage {'debugging': False, 'gluon_parent': '/home/mdipierro/web2py'\
+, 'is_jython': False, 'applications_parent': '/home/mdipierro/web2py',\
+ 'app_folders': set([]), 'db_sessions': set([])}>
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    settings
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +<Storage {'debugging': False, 'gluon_parent': '/home/mdipierro/web2py'\
+, 'is_jython': False, 'applications_parent': '/home/mdipierro/web2py',\
+ 'app_folders': set([]), 'db_sessions': set([])}>
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.settings-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.settings-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.settings-pysrc.html
@@ -0,0 +1,133 @@
+
+
+
+
+  web2py.gluon.settings
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module settings
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.settings
    
+
    + 1  """ 
+ 2  This file is part of the web2py Web Framework 
+ 3  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+ 4  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+ 5  """ 
+ 6   
+ 7  from storage import Storage 
+ 8   
+ 9  global_settings = Storage() 
+10  settings = global_settings  # legacy compatibility 
+11   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:07 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.shell-module.html
Index: applications/examples/static/epydoc/web2py.gluon.shell-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.shell-module.html
@@ -0,0 +1,487 @@
+
+
+
+
+  web2py.gluon.shell
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module shell
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module shell
    source code

    
+This file is part of the web2py Web Framework Developed by Massimo Di 
+  Pierro <mdipierro@cs.depaul.edu>, limodou <limodou@gmail.com>
+  and srackham <srackham@gmail.com>. License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    exec_environment(pyfile='',
+        request=1,
+        response=1,
+        session=1)
    
+      ..    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    env(a,
+        import_models=True,
+        c=1,
+        f=1,
+        dir='',
+        extra_request={})
    
+      Return web2py execution environment for application (a), 
+      controller (c), function (f).    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    exec_pythonrc()
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    run(appname,
+        plain=True,
+        import_models=True,
+        startfile=1,
+        bpython=True)
    
+      Start interactive shell or run Python script (startfile) in web2py
+      controller environment.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    parse_path_info(path_info)
    
+      Parse path info formatted like a/c/f where c and f are optional 
+      and a leading / accepted.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    die(msg)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    test(testpath,
+        import_models=True,
+        verbose=True)
    
+      Run doctests in web2py environment.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    get_usage()
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    execute_from_command_line(argv=1)
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        logger = logging.getLogger("web2py")
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Function Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    exec_environment(pyfile='',
+        request=1,
+        response=1,
+        session=1)
+  
    
+      		source code 
+    
    
+  
+  
    +
+.. function:: gluon.shell.exec_environment([pyfile=''[, request=Request()
+    [, response=Response[, session=Session()]]]])
+
+    Environment builder and module loader.
+
+
+    Builds a web2py environment and optionally executes a Python
+    file into the environment.
+    A Storage dictionary containing the resulting environment is returned.
+    The working directory must be web2py root -- this is the web2py default.
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    env(a,
+        import_models=True,
+        c=1,
+        f=1,
+        dir='',
+        extra_request={})
+  
    
+      		source code 
+    
    
+  
+  
    Return web2py execution environment for application (a), controller 
+  (c), function (f). If import_models is True the exec all application 
+  models into the environment.
    
+  extra_request allows you to pass along any extra variables to the 
+  request object before your models get executed. This was mainly done to 
+  support web2py_utils.test_runner, however you can use it with any wrapper
+  scripts that need access to the web2py environment.
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    run(appname,
+        plain=True,
+        import_models=True,
+        startfile=1,
+        bpython=True)
+  
    
+      		source code 
+    
    
+  
+  
    Start interactive shell or run Python script (startfile) in web2py 
+  controller environment. appname is formatted like:
    
+  a      web2py application name a/c    exec the controller c into the 
+  application environment
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    parse_path_info(path_info)
+  
    
+      		source code 
+    
    
+  
+  Parse path info formatted like a/c/f where c and f are optional and a 
+  leading / accepted. Return tuple (a, c, f). If invalid path_info a is set
+  to None. If c or f are omitted they are set to None.
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    test(testpath,
+        import_models=True,
+        verbose=True)
+  
    
+      		source code 
+    
    
+  
+  
    Run doctests in web2py environment. testpath is formatted like:
    
+  
    a      tests all controllers in application a a/c    tests controller 
+  c in application a a/c/f  test function f in controller c, application 
+  a
    
+  Where a, c and f are application, controller and function names 
+  respectively. If the testpath is a file name the file is tested. If a 
+  controller is specified models are executed by default.
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.shell-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.shell-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.shell-pysrc.html
@@ -0,0 +1,703 @@
+
+
+
+
+  web2py.gluon.shell
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module shell
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.shell
    
+
    +  1  #!/usr/bin/env python 
+  2  # -*- coding: utf-8 -*- 
+  3   
+  4  """ 
+  5  This file is part of the web2py Web Framework 
+  6  Developed by Massimo Di Pierro <mdipierro@cs.depaul.edu>, 
+  7  limodou <limodou@gmail.com> and srackham <srackham@gmail.com>. 
+  8  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+  9   
+ 10  """ 
+ 11   
+ 12  import os 
+ 13  import sys 
+ 14  import code 
+ 15  import logging 
+ 16  import types 
+ 17  import re 
+ 18  import optparse 
+ 19  import glob 
+ 20   
+ 21  import fileutils 
+ 22  import settings 
+ 23  from utils import web2py_uuid 
+ 24  from compileapp import build_environment, read_pyc, run_models_in 
+ 25  from restricted import RestrictedError 
+ 26  from globals import Request, Response, Session 
+ 27  from storage import Storage 
+ 28  from admin import w2p_unpack 
+ 29   
+ 30   
+ 31  logger = logging.getLogger("web2py") 
+ 32   
+
     33 -def exec_environment( 
+ 34      pyfile='', 
+ 35      request=None, 
+ 36      response=None, 
+ 37      session=None, 
+ 38      ): 
+
     39      """ 
+ 40      .. function:: gluon.shell.exec_environment([pyfile=''[, request=Request() 
+ 41          [, response=Response[, session=Session()]]]]) 
+ 42   
+ 43          Environment builder and module loader. 
+ 44   
+ 45   
+ 46          Builds a web2py environment and optionally executes a Python 
+ 47          file into the environment. 
+ 48          A Storage dictionary containing the resulting environment is returned. 
+ 49          The working directory must be web2py root -- this is the web2py default. 
+ 50   
+ 51      """ 
+ 52   
+ 53      if request==None: request = Request() 
+ 54      if response==None: response = Response() 
+ 55      if session==None: session = Session() 
+ 56   
+ 57      if request.folder is None: 
+ 58          mo = re.match(r'(|.*/)applications/(?P<appname>[^/]+)', pyfile) 
+ 59          if mo: 
+ 60              appname = mo.group('appname') 
+ 61              request.folder = os.path.join('applications', appname) 
+ 62          else: 
+ 63              request.folder = '' 
+ 64      env = build_environment(request, response, session, store_current=False) 
+ 65      if pyfile: 
+ 66          pycfile = pyfile + 'c' 
+ 67          if os.path.isfile(pycfile): 
+ 68              exec read_pyc(pycfile) in env 
+ 69          else: 
+ 70              execfile(pyfile, env) 
+ 71      return Storage(env) 
+
     72   
+ 73   
+
     74 -def env( 
+ 75      a, 
+ 76      import_models=False, 
+ 77      c=None, 
+ 78      f=None, 
+ 79      dir='', 
+ 80      extra_request={}, 
+ 81      ): 
+
     82      """ 
+ 83      Return web2py execution environment for application (a), controller (c), 
+ 84      function (f). 
+ 85      If import_models is True the exec all application models into the 
+ 86      environment. 
+ 87   
+ 88      extra_request allows you to pass along any extra 
+ 89      variables to the request object before your models 
+ 90      get executed. This was mainly done to support 
+ 91      web2py_utils.test_runner, however you can use it 
+ 92      with any wrapper scripts that need access to the 
+ 93      web2py environment. 
+ 94      """ 
+ 95   
+ 96      request = Request() 
+ 97      response = Response() 
+ 98      session = Session() 
+ 99      request.application = a 
+100   
+101      # Populate the dummy environment with sensible defaults. 
+102   
+103      if not dir: 
+104          request.folder = os.path.join('applications', a) 
+105      else: 
+106          request.folder = dir 
+107      request.controller = c or 'default' 
+108      request.function = f or 'index' 
+109      response.view = '%s/%s.html' % (request.controller, 
+110                                      request.function) 
+111      request.env.path_info = '/%s/%s/%s' % (a, c, f) 
+112      request.env.http_host = '127.0.0.1:8000' 
+113      request.env.remote_addr = '127.0.0.1' 
+114      request.env.web2py_runtime_gae = settings.global_settings.web2py_runtime_gae 
+115   
+116      for k,v in extra_request.items(): 
+117          request[k] = v 
+118   
+119      # Monkey patch so credentials checks pass. 
+120   
+121      def check_credentials(request, other_application='admin'): 
+122          return True 
+
    123   
+124      fileutils.check_credentials = check_credentials 
+125   
+126      environment = build_environment(request, response, session) 
+127   
+128      if import_models: 
+129          try: 
+130              run_models_in(environment) 
+131          except RestrictedError, e: 
+132              sys.stderr.write(e.traceback+'\n') 
+133              sys.exit(1) 
+134   
+135      environment['__name__'] = '__main__' 
+136      return environment 
+137   
+138   
+
    139 -def exec_pythonrc(): 
+
    140      pythonrc = os.environ.get('PYTHONSTARTUP') 
+141      if pythonrc and os.path.isfile(pythonrc): 
+142          try: 
+143              execfile(pythonrc) 
+144          except NameError: 
+145              pass 
+
    146   
+147   
+
    148 -def run( 
+149      appname, 
+150      plain=False, 
+151      import_models=False, 
+152      startfile=None, 
+153      bpython=False 
+154      ): 
+
    155      """ 
+156      Start interactive shell or run Python script (startfile) in web2py 
+157      controller environment. appname is formatted like: 
+158   
+159      a      web2py application name 
+160      a/c    exec the controller c into the application environment 
+161      """ 
+162   
+163      (a, c, f) = parse_path_info(appname) 
+164      errmsg = 'invalid application name: %s' % appname 
+165      if not a: 
+166          die(errmsg) 
+167      adir = os.path.join('applications', a) 
+168      if not os.path.exists(adir): 
+169          if raw_input('application %s does not exist, create (y/n)?' 
+170                        % a).lower() in ['y', 'yes']: 
+171              os.mkdir(adir) 
+172              w2p_unpack('welcome.w2p', adir) 
+173              for subfolder in ['models','views','controllers', 'databases', 
+174                                'modules','cron','errors','sessions', 
+175                                'languages','static','private','uploads']: 
+176                  subpath =  os.path.join(adir,subfolder) 
+177                  if not os.path.exists(subpath): 
+178                      os.mkdir(subpath) 
+179              db = os.path.join(adir,'models/db.py') 
+180              if os.path.exists(db): 
+181                  data = fileutils.read_file(db) 
+182                  data = data.replace('<your secret key>','sha512:'+web2py_uuid()) 
+183                  fileutils.write_file(db, data) 
+184   
+185      if c: 
+186          import_models = True 
+187      _env = env(a, c=c, import_models=import_models) 
+188      if c: 
+189          cfile = os.path.join('applications', a, 'controllers', c + '.py') 
+190          if not os.path.isfile(cfile): 
+191              cfile = os.path.join('applications', a, 'compiled', "controllers_%s_%s.pyc" % (c,f)) 
+192              if not os.path.isfile(cfile): 
+193                  die(errmsg) 
+194              else: 
+195                  exec read_pyc(cfile) in _env 
+196          else: 
+197              execfile(cfile, _env) 
+198   
+199      if f: 
+200          exec ('print %s()' % f, _env) 
+201      elif startfile: 
+202          exec_pythonrc() 
+203          try: 
+204              execfile(startfile, _env) 
+205          except RestrictedError, e: 
+206              print e.traceback 
+207      else: 
+208          if not plain: 
+209              if bpython: 
+210                  try: 
+211                      import bpython 
+212                      bpython.embed(locals_=_env) 
+213                      return 
+214                  except: 
+215                      logger.warning( 
+216                          'import bpython error; trying ipython...') 
+217              else: 
+218                  try: 
+219                      import IPython 
+220                      # following 2 lines fix a problem with IPython; thanks Michael Toomim 
+221                      if '__builtins__' in _env: 
+222                          del _env['__builtins__'] 
+223                      shell = IPython.Shell.IPShell(argv=[], user_ns=_env) 
+224                      shell.mainloop() 
+225                      return 
+226                  except: 
+227                      logger.warning( 
+228                          'import IPython error; use default python shell') 
+229          try: 
+230              import readline 
+231              import rlcompleter 
+232          except ImportError: 
+233              pass 
+234          else: 
+235              readline.set_completer(rlcompleter.Completer(_env).complete) 
+236              readline.parse_and_bind('tab:complete') 
+237          exec_pythonrc() 
+238          code.interact(local=_env) 
+
    239   
+240   
+
    241 -def parse_path_info(path_info): 
+
    242      """ 
+243      Parse path info formatted like a/c/f where c and f are optional 
+244      and a leading / accepted. 
+245      Return tuple (a, c, f). If invalid path_info a is set to None. 
+246      If c or f are omitted they are set to None. 
+247      """ 
+248   
+249      mo = re.match(r'^/?(?P<a>\w+)(/(?P<c>\w+)(/(?P<f>\w+))?)?$', 
+250                    path_info) 
+251      if mo: 
+252          return (mo.group('a'), mo.group('c'), mo.group('f')) 
+253      else: 
+254          return (None, None, None) 
+
    255   
+256   
+
    257 -def die(msg): 
+
    258      print >> sys.stderr, msg 
+259      sys.exit(1) 
+
    260   
+261   
+
    262 -def test(testpath, import_models=True, verbose=False): 
+
    263      """ 
+264      Run doctests in web2py environment. testpath is formatted like: 
+265   
+266      a      tests all controllers in application a 
+267      a/c    tests controller c in application a 
+268      a/c/f  test function f in controller c, application a 
+269   
+270      Where a, c and f are application, controller and function names 
+271      respectively. If the testpath is a file name the file is tested. 
+272      If a controller is specified models are executed by default. 
+273      """ 
+274   
+275      import doctest 
+276      if os.path.isfile(testpath): 
+277          mo = re.match(r'(|.*/)applications/(?P<a>[^/]+)', testpath) 
+278          if not mo: 
+279              die('test file is not in application directory: %s' 
+280                   % testpath) 
+281          a = mo.group('a') 
+282          c = f = None 
+283          files = [testpath] 
+284      else: 
+285          (a, c, f) = parse_path_info(testpath) 
+286          errmsg = 'invalid test path: %s' % testpath 
+287          if not a: 
+288              die(errmsg) 
+289          cdir = os.path.join('applications', a, 'controllers') 
+290          if not os.path.isdir(cdir): 
+291              die(errmsg) 
+292          if c: 
+293              cfile = os.path.join(cdir, c + '.py') 
+294              if not os.path.isfile(cfile): 
+295                  die(errmsg) 
+296              files = [cfile] 
+297          else: 
+298              files = glob.glob(os.path.join(cdir, '*.py')) 
+299      for testfile in files: 
+300          globs = env(a, import_models) 
+301          ignores = globs.keys() 
+302          execfile(testfile, globs) 
+303   
+304          def doctest_object(name, obj): 
+305              """doctest obj and enclosed methods and classes.""" 
+306   
+307              if type(obj) in (types.FunctionType, types.TypeType, 
+308                               types.ClassType, types.MethodType, 
+309                               types.UnboundMethodType): 
+310   
+311                  # Reload environment before each test. 
+312   
+313                  globs = env(a, c=c, f=f, import_models=import_models) 
+314                  execfile(testfile, globs) 
+315                  doctest.run_docstring_examples(obj, globs=globs, 
+316                          name='%s: %s' % (os.path.basename(testfile), 
+317                          name), verbose=verbose) 
+318                  if type(obj) in (types.TypeType, types.ClassType): 
+319                      for attr_name in dir(obj): 
+320   
+321                          # Execute . operator so decorators are executed. 
+322   
+323                          o = eval('%s.%s' % (name, attr_name), globs) 
+324                          doctest_object(attr_name, o) 
+
    325   
+326          for (name, obj) in globs.items(): 
+327              if name not in ignores and (f is None or f == name): 
+328                  doctest_object(name, obj) 
+329   
+330   
+
    331 -def get_usage(): 
+
    332      usage = """ 
+333    %prog [options] pythonfile 
+334  """ 
+335      return usage 
+
    336   
+337   
+
    338 -def execute_from_command_line(argv=None): 
+
    339      if argv is None: 
+340          argv = sys.argv 
+341   
+342      parser = optparse.OptionParser(usage=get_usage()) 
+343   
+344      parser.add_option('-S', '--shell', dest='shell', metavar='APPNAME', 
+345          help='run web2py in interactive shell or IPython(if installed) ' + \ 
+346              'with specified appname') 
+347      msg = 'run web2py in interactive shell or bpython (if installed) with' 
+348      msg += ' specified appname (if app does not exist it will be created).' 
+349      msg += '\n Use combined with --shell' 
+350      parser.add_option( 
+351          '-B', 
+352          '--bpython', 
+353          action='store_true', 
+354          default=False, 
+355          dest='bpython', 
+356          help=msg, 
+357          ) 
+358      parser.add_option( 
+359          '-P', 
+360          '--plain', 
+361          action='store_true', 
+362          default=False, 
+363          dest='plain', 
+364          help='only use plain python shell, should be used with --shell option', 
+365          ) 
+366      parser.add_option( 
+367          '-M', 
+368          '--import_models', 
+369          action='store_true', 
+370          default=False, 
+371          dest='import_models', 
+372          help='auto import model files, default is False, ' + \ 
+373              ' should be used with --shell option', 
+374          ) 
+375      parser.add_option( 
+376          '-R', 
+377          '--run', 
+378          dest='run', 
+379          metavar='PYTHON_FILE', 
+380          default='', 
+381          help='run PYTHON_FILE in web2py environment, ' + \ 
+382              'should be used with --shell option', 
+383          ) 
+384   
+385      (options, args) = parser.parse_args(argv[1:]) 
+386   
+387      if len(sys.argv) == 1: 
+388          parser.print_help() 
+389          sys.exit(0) 
+390   
+391      if len(args) > 0: 
+392          startfile = args[0] 
+393      else: 
+394          startfile = '' 
+395      run(options.shell, options.plain, startfile=startfile, bpython=options.bpython) 
+
    396   
+397   
+398  if __name__ == '__main__': 
+399      execute_from_command_line() 
+400   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:08 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sql-module.html
Index: applications/examples/static/epydoc/web2py.gluon.sql-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sql-module.html
@@ -0,0 +1,174 @@
+
+
+
+
+  web2py.gluon.sql
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sql
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module sql
    source code

    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        DAL
    
+      an instance of this class represents a database connection
+    
    
+       
+    
+        Field
    
+      an instance of this class represents a database field
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        drivers = ['SQLite3', 'pymysql', 'PostgreSQL']
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sql-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.sql-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sql-pysrc.html
@@ -0,0 +1,128 @@
+
+
+
+
+  web2py.gluon.sql
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sql
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.sql
    
+
    +1  # this file exists for backward compatibility 
+2   
+3  __all__ = ['DAL','Field','drivers'] 
+4   
+5  from dal import DAL, Field, Table, Query, Set, Expression, Row, Rows, drivers, BaseAdapter, SQLField, SQLTable, SQLXorable, SQLQuery, SQLSet, SQLRows, SQLStorage, SQLDB, GQLDB, SQLALL, SQLCustomType 
+6   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:04 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sqlhtml-module.html
Index: applications/examples/static/epydoc/web2py.gluon.sqlhtml-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sqlhtml-module.html
@@ -0,0 +1,476 @@
+
+
+
+
+  web2py.gluon.sqlhtml
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sqlhtml
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module sqlhtml
    source code

    
+
    +
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+Holds:
+
+- SQLFORM: provide a form for a table (with/without record)
+- SQLTABLE: provides a table for a set of records
+- form_factory: provides a SQLFORM for an non-db backed table
+
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        FormWidget
    
+      helper for SQLFORM to generate form input fields (widget), 
+        related to the fieldtype
+    
    
+       
+    
+        StringWidget
+    
    
+       
+    
+        IntegerWidget
+    
    
+       
+    
+        DoubleWidget
+    
    
+       
+    
+        DecimalWidget
+    
    
+       
+    
+        TimeWidget
+    
    
+       
+    
+        DateWidget
+    
    
+       
+    
+        DatetimeWidget
+    
    
+       
+    
+        TextWidget
+    
    
+       
+    
+        BooleanWidget
+    
    
+       
+    
+        OptionsWidget
+    
    
+       
+    
+        ListWidget
+    
    
+       
+    
+        MultipleOptionsWidget
+    
    
+       
+    
+        RadioWidget
+    
    
+       
+    
+        CheckboxesWidget
+    
    
+       
+    
+        PasswordWidget
+    
    
+       
+    
+        UploadWidget
+    
    
+       
+    
+        AutocompleteWidget
+    
    
+       
+    
+        SQLFORM
    
+      SQLFORM is used to map a table (and a current record) into an HTML form
+
+given a SQLTable stored in db.table
+
+generates an insert form::
+
+    SQLFORM(db.table)
+
+generates an update form::
+
+    record=db.table[some_id]
+    SQLFORM(db.table, record)
+
+generates an update with a delete button::
+
+    SQLFORM(db.table, record, deletable=True)
+
+if record is an int::
+
+    record=db.table[record]
+
+optional arguments:
+
+:param fields: a list of fields that should be placed in the form,
+    default is all.
+    
    
+       
+    
+        SQLTABLE
    
+      given a Rows object, as returned by a db().select(), generates
+an html table with the rows.
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    represent(field,
+        value,
+        record)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    safe_int(x)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    safe_float(x)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    form_factory(*fields,
+        **attributes)
    
+      generates a SQLFORM for the given fields.    		
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        table_field = re.compile(r'[\w_]+\.[\w_]+')
+    
    
+       
+    
+        widget_class = re.compile(r'^\w*')
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Function Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    form_factory(*fields,
+        **attributes)
+    
    Static Method
+  
    
+      		source code 
+    
    
+  
+  
    generates a SQLFORM for the given fields.
    
+  Internally will build a non-database based data model to hold the 
+  fields.
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sqlhtml-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.sqlhtml-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sqlhtml-pysrc.html
@@ -0,0 +1,2831 @@
+
+
+
+
+  web2py.gluon.sqlhtml
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sqlhtml
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.sqlhtml
    
+
    +   1  #!/usr/bin/env python 
+   2  # -*- coding: utf-8 -*- 
+   3   
+   4  """ 
+   5  This file is part of the web2py Web Framework 
+   6  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+   7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+   8   
+   9  Holds: 
+  10   
+  11  - SQLFORM: provide a form for a table (with/without record) 
+  12  - SQLTABLE: provides a table for a set of records 
+  13  - form_factory: provides a SQLFORM for an non-db backed table 
+  14   
+  15  """ 
+  16   
+  17  from http import HTTP 
+  18  from html import XML, SPAN, TAG, A, DIV, UL, LI, TEXTAREA, BR, IMG, SCRIPT 
+  19  from html import FORM, INPUT, LABEL, OPTION, SELECT 
+  20  from html import TABLE, THEAD, TBODY, TR, TD, TH 
+  21  from html import URL as Url 
+  22  from dal import DAL, Table, Row, CALLABLETYPES 
+  23  from storage import Storage 
+  24  from utils import md5_hash 
+  25  from validators import IS_EMPTY_OR 
+  26   
+  27  import urllib 
+  28  import re 
+  29  import cStringIO 
+  30   
+  31   
+  32  table_field = re.compile('[\w_]+\.[\w_]+') 
+  33  widget_class = re.compile('^\w*') 
+  34   
+
      35 -def represent(field,value,record): 
+
      36      f = field.represent 
+  37      if not callable(f): 
+  38          return str(value) 
+  39      n = f.func_code.co_argcount-len(f.func_defaults or []) 
+  40      if n==1: 
+  41          return f(value) 
+  42      elif n==2: 
+  43          return f(value,record) 
+  44      else: 
+  45          raise RuntimeError, "field representation must take 1 or 2 args" 
+
      46   
+
      47 -def safe_int(x): 
+
      48      try: 
+  49          return int(x) 
+  50      except ValueError: 
+  51          return 0 
+
      52   
+
      53 -def safe_float(x): 
+
      54      try: 
+  55          return float(x) 
+  56      except ValueError: 
+  57          return 0 
+
      58   
+
      59 -class FormWidget(object): 
+
      60      """ 
+  61      helper for SQLFORM to generate form input fields (widget), 
+  62      related to the fieldtype 
+  63      """ 
+  64   
+  65      @staticmethod 
+
      66 -    def _attributes(field, widget_attributes, **attributes): 
+
      67          """ 
+  68          helper to build a common set of attributes 
+  69   
+  70          :param field: the field involved, some attributes are derived from this 
+  71          :param widget_attributes:  widget related attributes 
+  72          :param attributes: any other supplied attributes 
+  73          """ 
+  74          attr = dict( 
+  75              _id = '%s_%s' % (field._tablename, field.name), 
+  76              _class = widget_class.match(str(field.type)).group(), 
+  77              _name = field.name, 
+  78              requires = field.requires, 
+  79              ) 
+  80          attr.update(widget_attributes) 
+  81          attr.update(attributes) 
+  82          return attr 
+
      83   
+  84      @staticmethod 
+
      85 -    def widget(field, value, **attributes): 
+
      86          """ 
+  87          generates the widget for the field. 
+  88   
+  89          When serialized, will provide an INPUT tag: 
+  90   
+  91          - id = tablename_fieldname 
+  92          - class = field.type 
+  93          - name = fieldname 
+  94   
+  95          :param field: the field needing the widget 
+  96          :param value: value 
+  97          :param attributes: any other attributes to be applied 
+  98          """ 
+  99   
+ 100          raise NotImplementedError 
+
     101   
+
     102 -class StringWidget(FormWidget): 
+
     103   
+ 104      @staticmethod 
+
     105 -    def widget(field, value, **attributes): 
+
     106          """ 
+ 107          generates an INPUT text tag. 
+ 108   
+ 109          see also: :meth:`FormWidget.widget` 
+ 110          """ 
+ 111   
+ 112          default = dict( 
+ 113              _type = 'text', 
+ 114              value = (value!=None and str(value)) or '', 
+ 115              ) 
+ 116          attr = StringWidget._attributes(field, default, **attributes) 
+ 117   
+ 118          return INPUT(**attr) 
+
     119   
+ 120   
+
     121 -class IntegerWidget(StringWidget): 
+
     122   
+ 123      pass 
+
     124   
+ 125   
+
     126 -class DoubleWidget(StringWidget): 
+
     127   
+ 128      pass 
+
     129   
+ 130   
+
     131 -class DecimalWidget(StringWidget): 
+
     132   
+ 133      pass 
+
     134   
+ 135   
+
     136 -class TimeWidget(StringWidget): 
+
     137   
+ 138      pass 
+
     139   
+ 140   
+
     141 -class DateWidget(StringWidget): 
+
     142   
+ 143      pass 
+
     144   
+ 145   
+
     146 -class DatetimeWidget(StringWidget): 
+
     147   
+ 148      pass 
+
     149   
+ 150   
+
     151 -class TextWidget(FormWidget): 
+
     152   
+ 153      @staticmethod 
+
     154 -    def widget(field, value, **attributes): 
+
     155          """ 
+ 156          generates a TEXTAREA tag. 
+ 157   
+ 158          see also: :meth:`FormWidget.widget` 
+ 159          """ 
+ 160   
+ 161          default = dict( 
+ 162              value = value, 
+ 163              ) 
+ 164          attr = TextWidget._attributes(field, default, **attributes) 
+ 165   
+ 166          return TEXTAREA(**attr) 
+
     167   
+ 168   
+
     169 -class BooleanWidget(FormWidget): 
+
     170   
+ 171      @staticmethod 
+
     172 -    def widget(field, value, **attributes): 
+
     173          """ 
+ 174          generates an INPUT checkbox tag. 
+ 175   
+ 176          see also: :meth:`FormWidget.widget` 
+ 177          """ 
+ 178   
+ 179          default=dict( 
+ 180              _type='checkbox', 
+ 181              value=value, 
+ 182              ) 
+ 183          attr = BooleanWidget._attributes(field, default, **attributes) 
+ 184   
+ 185          return INPUT(**attr) 
+
     186   
+ 187   
+
     188 -class OptionsWidget(FormWidget): 
+
     189   
+ 190      @staticmethod 
+
     191 -    def has_options(field): 
+
     192          """ 
+ 193          checks if the field has selectable options 
+ 194   
+ 195          :param field: the field needing checking 
+ 196          :returns: True if the field has options 
+ 197          """ 
+ 198   
+ 199          return hasattr(field.requires, 'options') 
+
     200   
+ 201      @staticmethod 
+
     202 -    def widget(field, value, **attributes): 
+
     203          """ 
+ 204          generates a SELECT tag, including OPTIONs (only 1 option allowed) 
+ 205   
+ 206          see also: :meth:`FormWidget.widget` 
+ 207          """ 
+ 208          default = dict( 
+ 209              value=value, 
+ 210              ) 
+ 211          attr = OptionsWidget._attributes(field, default, **attributes) 
+ 212   
+ 213          requires = field.requires 
+ 214          if not isinstance(requires, (list, tuple)): 
+ 215              requires = [requires] 
+ 216          if requires: 
+ 217              if hasattr(requires[0], 'options'): 
+ 218                  options = requires[0].options() 
+ 219              else: 
+ 220                  raise SyntaxError, 'widget cannot determine options of %s' \ 
+ 221                      % field 
+ 222          opts = [OPTION(v, _value=k) for (k, v) in options] 
+ 223   
+ 224          return SELECT(*opts, **attr) 
+
     225   
+
     226 -class ListWidget(StringWidget): 
+
     227      @staticmethod 
+
     228 -    def widget(field,value,**attributes): 
+
     229          _id = '%s_%s' % (field._tablename, field.name) 
+ 230          _name = field.name 
+ 231          if field.type=='list:integer': _class = 'integer' 
+ 232          else: _class = 'string' 
+ 233          items=[LI(INPUT(_id=_id,_class=_class,_name=_name,value=v,hideerror=True)) \ 
+ 234                     for v in value or ['']] 
+ 235          script=SCRIPT(""" 
+ 236  // from http://refactormycode.com/codes/694-expanding-input-list-using-jquery 
+ 237  (function(){ 
+ 238  jQuery.fn.grow_input = function() { 
+ 239    return this.each(function() { 
+ 240      var ul = this; 
+ 241      jQuery(ul).find(":text").after('<a href="javascript:void(0)>+</a>').keypress(function (e) { return (e.which == 13) ? pe(ul) : true; }).next().click(function(){ pe(ul) }); 
+ 242    }); 
+ 243  }; 
+ 244  function pe(ul) { 
+ 245    var new_line = ml(ul); 
+ 246    rel(ul); 
+ 247    new_line.appendTo(ul); 
+ 248    new_line.find(":text").focus(); 
+ 249    return false; 
+ 250  } 
+ 251  function ml(ul) { 
+ 252    var line = jQuery(ul).find("li:first").clone(true); 
+ 253    line.find(':text').val(''); 
+ 254    return line; 
+ 255  } 
+ 256  function rel(ul) { 
+ 257    jQuery(ul).find("li").each(function() { 
+ 258      var trimmed = jQuery.trim(jQuery(this.firstChild).val()); 
+ 259      if (trimmed=='') jQuery(this).remove(); else jQuery(this.firstChild).val(trimmed); 
+ 260    }); 
+ 261  } 
+ 262  })(); 
+ 263  jQuery(document).ready(function(){jQuery('#%s_grow_input').grow_input();}); 
+ 264  """ % _id) 
+ 265          attributes['_id']=_id+'_grow_input' 
+ 266          return TAG[''](UL(*items,**attributes),script) 
+
     267   
+ 268   
+
     269 -class MultipleOptionsWidget(OptionsWidget): 
+
     270   
+ 271      @staticmethod 
+
     272 -    def widget(field, value, size=5, **attributes): 
+
     273          """ 
+ 274          generates a SELECT tag, including OPTIONs (multiple options allowed) 
+ 275   
+ 276          see also: :meth:`FormWidget.widget` 
+ 277   
+ 278          :param size: optional param (default=5) to indicate how many rows must 
+ 279              be shown 
+ 280          """ 
+ 281   
+ 282          attributes.update(dict(_size=size, _multiple=True)) 
+ 283   
+ 284          return OptionsWidget.widget(field, value, **attributes) 
+
     285   
+ 286   
+
     287 -class RadioWidget(OptionsWidget): 
+
     288   
+ 289      @staticmethod 
+
     290 -    def widget(field, value, **attributes): 
+
     291          """ 
+ 292          generates a TABLE tag, including INPUT radios (only 1 option allowed) 
+ 293   
+ 294          see also: :meth:`FormWidget.widget` 
+ 295          """ 
+ 296   
+ 297          attr = OptionsWidget._attributes(field, {}, **attributes) 
+ 298   
+ 299          requires = field.requires 
+ 300          if not isinstance(requires, (list, tuple)): 
+ 301              requires = [requires] 
+ 302          if requires: 
+ 303              if hasattr(requires[0], 'options'): 
+ 304                  options = requires[0].options() 
+ 305              else: 
+ 306                  raise SyntaxError, 'widget cannot determine options of %s' \ 
+ 307                      % field 
+ 308   
+ 309          options = [(k, v) for k, v in options if str(v)] 
+ 310          opts = [] 
+ 311          cols = attributes.get('cols',1) 
+ 312          totals = len(options) 
+ 313          mods = totals%cols 
+ 314          rows = totals/cols 
+ 315          if mods: 
+ 316              rows += 1 
+ 317   
+ 318          for r_index in range(rows): 
+ 319              tds = [] 
+ 320              for k, v in options[r_index*cols:(r_index+1)*cols]: 
+ 321                  tds.append(TD(INPUT(_type='radio', _name=field.name, 
+ 322                           requires=attr.get('requires',None), 
+ 323                           hideerror=True, _value=k, 
+ 324                           value=value), v)) 
+ 325              opts.append(TR(tds)) 
+ 326   
+ 327          if opts: 
+ 328              opts[-1][0][0]['hideerror'] = False 
+ 329          return TABLE(*opts, **attr) 
+
     330   
+ 331   
+
     332 -class CheckboxesWidget(OptionsWidget): 
+
     333   
+ 334      @staticmethod 
+
     335 -    def widget(field, value, **attributes): 
+
     336          """ 
+ 337          generates a TABLE tag, including INPUT checkboxes (multiple allowed) 
+ 338   
+ 339          see also: :meth:`FormWidget.widget` 
+ 340          """ 
+ 341   
+ 342          # was values = re.compile('[\w\-:]+').findall(str(value)) 
+ 343          if isinstance(value, (list, tuple)): 
+ 344              values = [str(v) for v in value] 
+ 345          else: 
+ 346              values = [str(value)] 
+ 347   
+ 348          attr = OptionsWidget._attributes(field, {}, **attributes) 
+ 349   
+ 350          requires = field.requires 
+ 351          if not isinstance(requires, (list, tuple)): 
+ 352              requires = [requires] 
+ 353          if requires: 
+ 354              if hasattr(requires[0], 'options'): 
+ 355                  options = requires[0].options() 
+ 356              else: 
+ 357                  raise SyntaxError, 'widget cannot determine options of %s' \ 
+ 358                      % field 
+ 359   
+ 360          options = [(k, v) for k, v in options if k != ''] 
+ 361          opts = [] 
+ 362          cols = attributes.get('cols', 1) 
+ 363          totals = len(options) 
+ 364          mods = totals % cols 
+ 365          rows = totals / cols 
+ 366          if mods: 
+ 367              rows += 1 
+ 368   
+ 369          for r_index in range(rows): 
+ 370              tds = [] 
+ 371              for k, v in options[r_index*cols:(r_index+1)*cols]: 
+ 372                  if k in values: 
+ 373                      r_value = k 
+ 374                  else: 
+ 375                      r_value = [] 
+ 376                  tds.append(TD(INPUT(_type='checkbox', _name=field.name, 
+ 377                           requires=attr.get('requires', None), 
+ 378                           hideerror=True, _value=k, 
+ 379                           value=r_value), v)) 
+ 380              opts.append(TR(tds)) 
+ 381   
+ 382          if opts: 
+ 383              opts[-1][0][0]['hideerror'] = False 
+ 384          return TABLE(*opts, **attr) 
+
     385   
+ 386   
+
     387 -class PasswordWidget(FormWidget): 
+
     388   
+ 389      DEFAULT_PASSWORD_DISPLAY = 8*('*') 
+ 390   
+ 391      @staticmethod 
+
     392 -    def widget(field, value, **attributes): 
+
     393          """ 
+ 394          generates a INPUT password tag. 
+ 395          If a value is present it will be shown as a number of '*', not related 
+ 396          to the length of the actual value. 
+ 397   
+ 398          see also: :meth:`FormWidget.widget` 
+ 399          """ 
+ 400   
+ 401          default=dict( 
+ 402              _type='password', 
+ 403              _value=(value and PasswordWidget.DEFAULT_PASSWORD_DISPLAY) or '', 
+ 404              ) 
+ 405          attr = PasswordWidget._attributes(field, default, **attributes) 
+ 406   
+ 407          return INPUT(**attr) 
+
     408   
+ 409   
+
     410 -class UploadWidget(FormWidget): 
+
     411   
+ 412      DEFAULT_WIDTH = '150px' 
+ 413      ID_DELETE_SUFFIX = '__delete' 
+ 414      GENERIC_DESCRIPTION = 'file' 
+ 415      DELETE_FILE = 'delete' 
+ 416   
+ 417      @staticmethod 
+
     418 -    def widget(field, value, download_url=None, **attributes): 
+
     419          """ 
+ 420          generates a INPUT file tag. 
+ 421   
+ 422          Optionally provides an A link to the file, including a checkbox so 
+ 423          the file can be deleted. 
+ 424          All is wrapped in a DIV. 
+ 425   
+ 426          see also: :meth:`FormWidget.widget` 
+ 427   
+ 428          :param download_url: Optional URL to link to the file (default = None) 
+ 429          """ 
+ 430   
+ 431          default=dict( 
+ 432              _type='file', 
+ 433              ) 
+ 434          attr = UploadWidget._attributes(field, default, **attributes) 
+ 435   
+ 436          inp = INPUT(**attr) 
+ 437   
+ 438          if download_url and value: 
+ 439              url = download_url + '/' + value 
+ 440              (br, image) = ('', '') 
+ 441              if UploadWidget.is_image(value): 
+ 442                  br = BR() 
+ 443                  image = IMG(_src = url, _width = UploadWidget.DEFAULT_WIDTH) 
+ 444   
+ 445              requires = attr["requires"] 
+ 446              if requires == [] or isinstance(requires, IS_EMPTY_OR): 
+ 447                  inp = DIV(inp, '[', 
+ 448                            A(UploadWidget.GENERIC_DESCRIPTION, _href = url), 
+ 449                            '|', 
+ 450                            INPUT(_type='checkbox', 
+ 451                                  _name=field.name + UploadWidget.ID_DELETE_SUFFIX), 
+ 452                            UploadWidget.DELETE_FILE, 
+ 453                            ']', br, image) 
+ 454              else: 
+ 455                  inp = DIV(inp, '[', 
+ 456                            A(UploadWidget.GENERIC_DESCRIPTION, _href = url), 
+ 457                            ']', br, image) 
+ 458          return inp 
+
     459   
+ 460      @staticmethod 
+
     461 -    def represent(field, value, download_url=None): 
+
     462          """ 
+ 463          how to represent the file: 
+ 464   
+ 465          - with download url and if it is an image: <A href=...><IMG ...></A> 
+ 466          - otherwise with download url: <A href=...>file</A> 
+ 467          - otherwise: file 
+ 468   
+ 469          :param field: the field 
+ 470          :param value: the field value 
+ 471          :param download_url: url for the file download (default = None) 
+ 472          """ 
+ 473   
+ 474          inp = UploadWidget.GENERIC_DESCRIPTION 
+ 475   
+ 476          if download_url and value: 
+ 477              url = download_url + '/' + value 
+ 478              if UploadWidget.is_image(value): 
+ 479                  inp = IMG(_src = url, _width = UploadWidget.DEFAULT_WIDTH) 
+ 480              inp = A(inp, _href = url) 
+ 481   
+ 482          return inp 
+
     483   
+ 484      @staticmethod 
+
     485 -    def is_image(value): 
+
     486          """ 
+ 487          Tries to check if the filename provided references to an image 
+ 488   
+ 489          Checking is based on filename extension. Currently recognized: 
+ 490             gif, png, jp(e)g, bmp 
+ 491   
+ 492          :param value: filename 
+ 493          """ 
+ 494   
+ 495          extension = value.split('.')[-1].lower() 
+ 496          if extension in ['gif', 'png', 'jpg', 'jpeg', 'bmp']: 
+ 497              return True 
+ 498          return False 
+
     499   
+ 500   
+
     501 -class AutocompleteWidget(object): 
+
     502   
+
     503 -    def __init__(self, request, field, id_field=None, db=None, 
+ 504                   orderby=None, limitby=(0,10), 
+ 505                   keyword='_autocomplete_%(fieldname)s', 
+ 506                   min_length=2): 
+
     507          self.request = request 
+ 508          self.keyword = keyword % dict(fieldname=field.name) 
+ 509          self.db = db or field._db 
+ 510          self.orderby = orderby 
+ 511          self.limitby = limitby 
+ 512          self.min_length = min_length 
+ 513          self.fields=[field] 
+ 514          if id_field: 
+ 515              self.is_reference = True 
+ 516              self.fields.append(id_field) 
+ 517          else: 
+ 518              self.is_reference = False 
+ 519          if hasattr(request,'application'): 
+ 520              self.url = Url(r=request, args=request.args) 
+ 521              self.callback() 
+ 522          else: 
+ 523              self.url = request 
+
     524 -    def callback(self): 
+
     525          if self.keyword in self.request.vars: 
+ 526              field = self.fields[0] 
+ 527              rows = self.db(field.like(self.request.vars[self.keyword]+'%'))\ 
+ 528                  .select(orderby=self.orderby,limitby=self.limitby,*self.fields) 
+ 529              if rows: 
+ 530                  if self.is_reference: 
+ 531                      id_field = self.fields[1] 
+ 532                      raise HTTP(200,SELECT(_id=self.keyword,_class='autocomplete', 
+ 533                                            _size=len(rows),_multiple=(len(rows)==1), 
+ 534                                            *[OPTION(s[field.name],_value=s[id_field.name], 
+ 535                                                     _selected=(k==0)) \ 
+ 536                                                  for k,s in enumerate(rows)]).xml()) 
+ 537                  else: 
+ 538                      raise HTTP(200,SELECT(_id=self.keyword,_class='autocomplete', 
+ 539                                            _size=len(rows),_multiple=(len(rows)==1), 
+ 540                                            *[OPTION(s[field.name], 
+ 541                                                     _selected=(k==0)) \ 
+ 542                                                  for k,s in enumerate(rows)]).xml()) 
+ 543              else: 
+ 544   
+ 545                  raise HTTP(200,'') 
+
     546 -    def __call__(self,field,value,**attributes): 
+
     547          default = dict( 
+ 548              _type = 'text', 
+ 549              value = (value!=None and str(value)) or '', 
+ 550              ) 
+ 551          attr = StringWidget._attributes(field, default, **attributes) 
+ 552          div_id = self.keyword+'_div' 
+ 553          attr['_autocomplete']='off' 
+ 554          if self.is_reference: 
+ 555              key2 = self.keyword+'_aux' 
+ 556              key3 = self.keyword+'_auto' 
+ 557              attr['_class']='string' 
+ 558              name = attr['_name'] 
+ 559              if 'requires' in attr: del attr['requires'] 
+ 560              attr['_name'] = key2 
+ 561              value = attr['value'] 
+ 562              record = self.db(self.fields[1]==value).select(self.fields[0]).first() 
+ 563              attr['value'] = record and record[self.fields[0].name] 
+ 564              attr['_onblur']="jQuery('#%(div_id)s').delay(3000).fadeOut('slow');" % \ 
+ 565                  dict(div_id=div_id,u='F'+self.keyword) 
+ 566              attr['_onkeyup'] = "jQuery('#%(key3)s').val('');var e=event.which?event.which:event.keyCode; function %(u)s(){jQuery('#%(id)s').val(jQuery('#%(key)s :selected').text());jQuery('#%(key3)s').val(jQuery('#%(key)s').val())}; if(e==39) %(u)s(); else if(e==40) {if(jQuery('#%(key)s option:selected').next().length)jQuery('#%(key)s option:selected').attr('selected',null).next().attr('selected','selected'); %(u)s();} else if(e==38) {if(jQuery('#%(key)s option:selected').prev().length)jQuery('#%(key)s option:selected').attr('selected',null).prev().attr('selected','selected'); %(u)s();} else if(jQuery('#%(id)s').val().length>=%(min_length)s) jQuery.get('%(url)s?%(key)s='+escape(jQuery('#%(id)s').val()),function(data){if(data=='')jQuery('#%(key3)s').val('');else{jQuery('#%(id)s').next('.error').hide();jQuery('#%(div_id)s').html(data).show().focus();jQuery('#%(div_id)s select').css('width',jQuery('#%(id)s').css('width'));jQuery('#%(key3)s').val(jQuery('#%(key)s').val());jQuery('#%(key)s').change(%(u)s);jQuery('#%(key)s').click(%(u)s);};}); else jQuery('#%(div_id)s').fadeOut('slow');" % \ 
+ 567                  dict(url=self.url,min_length=self.min_length, 
+ 568                       key=self.keyword,id=attr['_id'],key2=key2,key3=key3, 
+ 569                       name=name,div_id=div_id,u='F'+self.keyword) 
+ 570              if self.min_length==0: 
+ 571                  attr['_onfocus'] = attr['_onkeyup'] 
+ 572              return TAG[''](INPUT(**attr),INPUT(_type='hidden',_id=key3,_value=value, 
+ 573                                                 _name=name,requires=field.requires), 
+ 574                             DIV(_id=div_id,_style='position:absolute;')) 
+ 575          else: 
+ 576              attr['_name']=field.name 
+ 577              attr['_onblur']="jQuery('#%(div_id)s').delay(3000).fadeOut('slow');" % \ 
+ 578                  dict(div_id=div_id,u='F'+self.keyword) 
+ 579              attr['_onkeyup'] = "var e=event.which?event.which:event.keyCode; function %(u)s(){jQuery('#%(id)s').val(jQuery('#%(key)s').val())}; if(e==39) %(u)s(); else if(e==40) {if(jQuery('#%(key)s option:selected').next().length)jQuery('#%(key)s option:selected').attr('selected',null).next().attr('selected','selected'); %(u)s();} else if(e==38) {if(jQuery('#%(key)s option:selected').prev().length)jQuery('#%(key)s option:selected').attr('selected',null).prev().attr('selected','selected'); %(u)s();} else if(jQuery('#%(id)s').val().length>=%(min_length)s) jQuery.get('%(url)s?%(key)s='+escape(jQuery('#%(id)s').val()),function(data){jQuery('#%(id)s').next('.error').hide();jQuery('#%(div_id)s').html(data).show().focus();jQuery('#%(div_id)s select').css('width',jQuery('#%(id)s').css('width'));jQuery('#%(key)s').change(%(u)s);jQuery('#%(key)s').click(%(u)s);}); else jQuery('#%(div_id)s').fadeOut('slow');" % \ 
+ 580                  dict(url=self.url,min_length=self.min_length, 
+ 581                       key=self.keyword,id=attr['_id'],div_id=div_id,u='F'+self.keyword) 
+ 582              if self.min_length==0: 
+ 583                  attr['_onfocus'] = attr['_onkeyup'] 
+ 584              return TAG[''](INPUT(**attr),DIV(_id=div_id,_style='position:absolute;')) 
+
     585   
+ 586   
+
     587 -class SQLFORM(FORM): 
+
     588   
+ 589      """ 
+ 590      SQLFORM is used to map a table (and a current record) into an HTML form 
+ 591   
+ 592      given a SQLTable stored in db.table 
+ 593   
+ 594      generates an insert form:: 
+ 595   
+ 596          SQLFORM(db.table) 
+ 597   
+ 598      generates an update form:: 
+ 599   
+ 600          record=db.table[some_id] 
+ 601          SQLFORM(db.table, record) 
+ 602   
+ 603      generates an update with a delete button:: 
+ 604   
+ 605          SQLFORM(db.table, record, deletable=True) 
+ 606   
+ 607      if record is an int:: 
+ 608   
+ 609          record=db.table[record] 
+ 610   
+ 611      optional arguments: 
+ 612   
+ 613      :param fields: a list of fields that should be placed in the form, 
+ 614          default is all. 
+ 615      :param labels: a dictionary with labels for each field, keys are the field 
+ 616          names. 
+ 617      :param col3: a dictionary with content for an optional third column 
+ 618              (right of each field). keys are field names. 
+ 619      :param linkto: the URL of a controller/function to access referencedby 
+ 620          records 
+ 621              see controller appadmin.py for examples 
+ 622      :param upload: the URL of a controller/function to download an uploaded file 
+ 623              see controller appadmin.py for examples 
+ 624   
+ 625      any named optional attribute is passed to the <form> tag 
+ 626              for example _class, _id, _style, _action, _method, etc. 
+ 627   
+ 628      """ 
+ 629   
+ 630      # usability improvements proposal by fpp - 4 May 2008 : 
+ 631      # - correct labels (for points to field id, not field name) 
+ 632      # - add label for delete checkbox 
+ 633      # - add translatable label for record ID 
+ 634      # - add third column to right of fields, populated from the col3 dict 
+ 635   
+ 636      widgets = Storage(dict( 
+ 637          string = StringWidget, 
+ 638          text = TextWidget, 
+ 639          password = PasswordWidget, 
+ 640          integer = IntegerWidget, 
+ 641          double = DoubleWidget, 
+ 642          decimal = DecimalWidget, 
+ 643          time = TimeWidget, 
+ 644          date = DateWidget, 
+ 645          datetime = DatetimeWidget, 
+ 646          upload = UploadWidget, 
+ 647          boolean = BooleanWidget, 
+ 648          blob = None, 
+ 649          options = OptionsWidget, 
+ 650          multiple = MultipleOptionsWidget, 
+ 651          radio = RadioWidget, 
+ 652          checkboxes = CheckboxesWidget, 
+ 653          autocomplete = AutocompleteWidget, 
+ 654          list = ListWidget, 
+ 655          )) 
+ 656   
+ 657      FIELDNAME_REQUEST_DELETE = 'delete_this_record' 
+ 658      FIELDKEY_DELETE_RECORD = 'delete_record' 
+ 659      ID_LABEL_SUFFIX = '__label' 
+ 660      ID_ROW_SUFFIX = '__row' 
+ 661   
+
     662 -    def __init__( 
+ 663          self, 
+ 664          table, 
+ 665          record = None, 
+ 666          deletable = False, 
+ 667          linkto = None, 
+ 668          upload = None, 
+ 669          fields = None, 
+ 670          labels = None, 
+ 671          col3 = {}, 
+ 672          submit_button = 'Submit', 
+ 673          delete_label = 'Check to delete:', 
+ 674          showid = True, 
+ 675          readonly = False, 
+ 676          comments = True, 
+ 677          keepopts = [], 
+ 678          ignore_rw = False, 
+ 679          record_id = None, 
+ 680          formstyle = 'table3cols', 
+ 681          buttons = ['submit'], 
+ 682          separator = ': ', 
+ 683          **attributes 
+ 684          ): 
+
     685          """ 
+ 686          SQLFORM(db.table, 
+ 687                 record=None, 
+ 688                 fields=['name'], 
+ 689                 labels={'name': 'Your name'}, 
+ 690                 linkto=URL(r=request, f='table/db/') 
+ 691          """ 
+ 692   
+ 693          self.ignore_rw = ignore_rw 
+ 694          self.formstyle = formstyle 
+ 695          nbsp = XML('&nbsp;') # Firefox2 does not display fields with blanks 
+ 696          FORM.__init__(self, *[], **attributes) 
+ 697          ofields = fields 
+ 698          keyed = hasattr(table,'_primarykey') 
+ 699   
+ 700          # if no fields are provided, build it from the provided table 
+ 701          # will only use writable or readable fields, unless forced to ignore 
+ 702          if fields == None: 
+ 703              fields = [f.name for f in table if (ignore_rw or f.writable or f.readable) and not f.compute] 
+ 704          self.fields = fields 
+ 705   
+ 706          # make sure we have an id 
+ 707          if self.fields[0] != table.fields[0] and \ 
+ 708                  isinstance(table,Table) and not keyed: 
+ 709              self.fields.insert(0, table.fields[0]) 
+ 710   
+ 711          self.table = table 
+ 712   
+ 713          # try to retrieve the indicated record using its id 
+ 714          # otherwise ignore it 
+ 715          if record and isinstance(record, (int, long, str, unicode)): 
+ 716              if not str(record).isdigit(): 
+ 717                  raise HTTP(404, "Object not found") 
+ 718              record = table._db(table._id == record).select().first() 
+ 719              if not record: 
+ 720                  raise HTTP(404, "Object not found") 
+ 721          self.record = record 
+ 722   
+ 723          self.record_id = record_id 
+ 724          if keyed: 
+ 725              if record: 
+ 726                  self.record_id = dict([(k,record[k]) for k in table._primarykey]) 
+ 727              else: 
+ 728                  self.record_id = dict([(k,None) for k in table._primarykey]) 
+ 729          self.field_parent = {} 
+ 730          xfields = [] 
+ 731          self.fields = fields 
+ 732          self.custom = Storage() 
+ 733          self.custom.dspval = Storage() 
+ 734          self.custom.inpval = Storage() 
+ 735          self.custom.label = Storage() 
+ 736          self.custom.comment = Storage() 
+ 737          self.custom.widget = Storage() 
+ 738          self.custom.linkto = Storage() 
+ 739   
+ 740          sep = separator or '' 
+ 741           
+ 742          for fieldname in self.fields: 
+ 743              if fieldname.find('.') >= 0: 
+ 744                  continue 
+ 745   
+ 746              field = self.table[fieldname] 
+ 747              comment = None 
+ 748   
+ 749              if comments: 
+ 750                  comment = col3.get(fieldname, field.comment) 
+ 751              if comment == None: 
+ 752                  comment = '' 
+ 753              self.custom.comment[fieldname] = comment 
+ 754   
+ 755              if labels != None and fieldname in labels: 
+ 756                  label = labels[fieldname] 
+ 757              else: 
+ 758                  label = field.label 
+ 759              self.custom.label[fieldname] = label 
+ 760   
+ 761              field_id = '%s_%s' % (table._tablename, fieldname) 
+ 762   
+ 763              label = LABEL(label, sep, _for=field_id, 
+ 764                            _id=field_id+SQLFORM.ID_LABEL_SUFFIX) 
+ 765   
+ 766              row_id = field_id+SQLFORM.ID_ROW_SUFFIX 
+ 767              if field.type == 'id': 
+ 768                  self.custom.dspval.id = nbsp 
+ 769                  self.custom.inpval.id = '' 
+ 770                  widget = '' 
+ 771                  if record: 
+ 772                      if showid and 'id' in fields and field.readable: 
+ 773                          v = record['id'] 
+ 774                          widget = SPAN(v, _id=field_id) 
+ 775                          self.custom.dspval.id = str(v) 
+ 776                          xfields.append((row_id,label, widget,comment)) 
+ 777                      self.record_id = str(record['id']) 
+ 778                  self.custom.widget.id = widget 
+ 779                  continue 
+ 780   
+ 781              if readonly and not ignore_rw and not field.readable: 
+ 782                  continue 
+ 783   
+ 784              if record: 
+ 785                  default = record[fieldname] 
+ 786              else: 
+ 787                  default = field.default 
+ 788                  if isinstance(default,CALLABLETYPES): 
+ 789                      default=default() 
+ 790   
+ 791              cond = readonly or \ 
+ 792                  (not ignore_rw and not field.writable and field.readable) 
+ 793   
+ 794              if default and not cond: 
+ 795                  default = field.formatter(default) 
+ 796              dspval = default 
+ 797              inpval = default 
+ 798   
+ 799              if cond: 
+ 800   
+ 801                  # ## if field.represent is available else 
+ 802                  # ## ignore blob and preview uploaded images 
+ 803                  # ## format everything else 
+ 804   
+ 805                  if field.represent: 
+ 806                      inp = represent(field,default,record) 
+ 807                  elif field.type in ['blob']: 
+ 808                      continue 
+ 809                  elif field.type == 'upload': 
+ 810                      inp = UploadWidget.represent(field, default, upload) 
+ 811                  elif field.type == 'boolean': 
+ 812                      inp = self.widgets.boolean.widget(field, default, _disabled=True) 
+ 813                  else: 
+ 814                      inp = field.formatter(default) 
+ 815              elif field.type == 'upload': 
+ 816                  if hasattr(field, 'widget') and field.widget: 
+ 817                      inp = field.widget(field, default, upload) 
+ 818                  else: 
+ 819                      inp = self.widgets.upload.widget(field, default, upload) 
+ 820              elif hasattr(field, 'widget') and field.widget: 
+ 821                  inp = field.widget(field, default) 
+ 822              elif field.type == 'boolean': 
+ 823                  inp = self.widgets.boolean.widget(field, default) 
+ 824                  if default: 
+ 825                      inpval = 'checked' 
+ 826                  else: 
+ 827                      inpval = '' 
+ 828              elif OptionsWidget.has_options(field): 
+ 829                  if not field.requires.multiple: 
+ 830                      inp = self.widgets.options.widget(field, default) 
+ 831                  else: 
+ 832                      inp = self.widgets.multiple.widget(field, default) 
+ 833                  if fieldname in keepopts: 
+ 834                      inpval = TAG[''](*inp.components) 
+ 835              elif field.type.startswith('list:'): 
+ 836                  inp = self.widgets.list.widget(field,default) 
+ 837              elif field.type == 'text': 
+ 838                  inp = self.widgets.text.widget(field, default) 
+ 839              elif field.type == 'password': 
+ 840                  inp = self.widgets.password.widget(field, default) 
+ 841                  if self.record: 
+ 842                      dspval = PasswordWidget.DEFAULT_PASSWORD_DISPLAY 
+ 843                  else: 
+ 844                      dspval = '' 
+ 845              elif field.type == 'blob': 
+ 846                  continue 
+ 847              else: 
+ 848                  inp = self.widgets.string.widget(field, default) 
+ 849   
+ 850              xfields.append((row_id,label,inp,comment)) 
+ 851              self.custom.dspval[fieldname] = dspval or nbsp 
+ 852              self.custom.inpval[fieldname] = inpval or '' 
+ 853              self.custom.widget[fieldname] = inp 
+ 854   
+ 855          # if a record is provided and found, as is linkto 
+ 856          # build a link 
+ 857          if record and linkto: 
+ 858              db = linkto.split('/')[-1] 
+ 859              for (rtable, rfield) in table._referenced_by: 
+ 860                  if keyed: 
+ 861                      rfld = table._db[rtable][rfield] 
+ 862                      query = urllib.quote('%s.%s==%s' % (db,rfld,record[rfld.type[10:].split('.')[1]])) 
+ 863                  else: 
+ 864                      query = urllib.quote('%s.%s==%s' % (db,table._db[rtable][rfield],record.id)) 
+ 865                  lname = olname = '%s.%s' % (rtable, rfield) 
+ 866                  if ofields and not olname in ofields: 
+ 867                      continue 
+ 868                  if labels and lname in labels: 
+ 869                      lname = labels[lname] 
+ 870                  widget = A(lname, 
+ 871                             _class='reference', 
+ 872                             _href='%s/%s?query=%s' % (linkto, rtable, query)) 
+ 873                  xfields.append((olname.replace('.', '__')+SQLFORM.ID_ROW_SUFFIX, 
+ 874                                  '',widget,col3.get(olname,''))) 
+ 875                  self.custom.linkto[olname.replace('.', '__')] = widget 
+ 876  #                 </block> 
+ 877   
+ 878          # when deletable, add delete? checkbox 
+ 879          self.custom.deletable = '' 
+ 880          if record and deletable: 
+ 881              widget = INPUT(_type='checkbox', 
+ 882                              _class='delete', 
+ 883                              _id=self.FIELDKEY_DELETE_RECORD, 
+ 884                              _name=self.FIELDNAME_REQUEST_DELETE, 
+ 885                              ) 
+ 886              xfields.append((self.FIELDKEY_DELETE_RECORD+SQLFORM.ID_ROW_SUFFIX, 
+ 887                              LABEL( 
+ 888                                  delete_label, 
+ 889                                  _for=self.FIELDKEY_DELETE_RECORD, 
+ 890                                  _id=self.FIELDKEY_DELETE_RECORD+SQLFORM.ID_LABEL_SUFFIX), 
+ 891                              widget, 
+ 892                              col3.get(self.FIELDKEY_DELETE_RECORD, ''))) 
+ 893              self.custom.deletable = widget 
+ 894          # when writable, add submit button 
+ 895          self.custom.submit = '' 
+ 896          if (not readonly) and ('submit' in buttons): 
+ 897              widget = INPUT(_type='submit', 
+ 898                             _value=submit_button) 
+ 899              xfields.append(('submit_record'+SQLFORM.ID_ROW_SUFFIX, 
+ 900                              '', widget,col3.get('submit_button', ''))) 
+ 901              self.custom.submit = widget 
+ 902          # if a record is provided and found 
+ 903          # make sure it's id is stored in the form 
+ 904          if record: 
+ 905              if not self['hidden']: 
+ 906                  self['hidden'] = {} 
+ 907              if not keyed: 
+ 908                  self['hidden']['id'] = record['id'] 
+ 909   
+ 910          (begin, end) = self._xml() 
+ 911          self.custom.begin = XML("<%s %s>" % (self.tag, begin)) 
+ 912          self.custom.end = XML("%s</%s>" % (end, self.tag)) 
+ 913          table = self.createform(xfields) 
+ 914          self.components = [table] 
+
     915   
+
     916 -    def createform(self, xfields): 
+
     917          if self.formstyle == 'table3cols': 
+ 918              table = TABLE() 
+ 919              for id,a,b,c in xfields: 
+ 920                  td_b = self.field_parent[id] = TD(b,_class='w2p_fw') 
+ 921                  table.append(TR(TD(a,_class='w2p_fl'), 
+ 922                                  td_b, 
+ 923                                  TD(c,_class='w2p_fc'),_id=id)) 
+ 924          elif self.formstyle == 'table2cols': 
+ 925              table = TABLE() 
+ 926              for id,a,b,c in xfields: 
+ 927                  td_b = self.field_parent[id] = TD(b,_class='w2p_fw',_colspan="2") 
+ 928                  table.append(TR(TD(a,_class='w2p_fl'), 
+ 929                                  TD(c,_class='w2p_fc'),_id=id 
+ 930                                  +'1',_class='even')) 
+ 931                  table.append(TR(td_b,_id=id+'2',_class='odd')) 
+ 932          elif self.formstyle == 'divs': 
+ 933              table = TAG['']() 
+ 934              for id,a,b,c in xfields: 
+ 935                  div_b = self.field_parent[id] = DIV(b,_class='w2p_fw') 
+ 936                  table.append(DIV(DIV(a,_class='w2p_fl'), 
+ 937                                   div_b, 
+ 938                                   DIV(c,_class='w2p_fc'),_id=id)) 
+ 939          elif self.formstyle == 'ul': 
+ 940              table = UL() 
+ 941              for id,a,b,c in xfields: 
+ 942                  div_b = self.field_parent[id] = DIV(b,_class='w2p_fw') 
+ 943                  table.append(LI(DIV(a,_class='w2p_fl'), 
+ 944                                  div_b, 
+ 945                                  DIV(c,_class='w2p_fc'),_id=id)) 
+ 946          elif type(self.formstyle) == type(lambda:None): 
+ 947              table = TABLE() 
+ 948              for id,a,b,c in xfields: 
+ 949                  td_b = self.field_parent[id] = TD(b,_class='w2p_fw') 
+ 950                  newrows = self.formstyle(id,a,td_b,c) 
+ 951                  if type(newrows).__name__ != "tuple": 
+ 952                      newrows = [newrows] 
+ 953                  for newrow in newrows: 
+ 954                      table.append(newrow) 
+ 955          else: 
+ 956              raise RuntimeError, 'formstyle not supported' 
+ 957          return table 
+
     958   
+ 959   
+
     960 -    def accepts( 
+ 961          self, 
+ 962          request_vars, 
+ 963          session=None, 
+ 964          formname='%(tablename)s/%(record_id)s', 
+ 965          keepvalues=False, 
+ 966          onvalidation=None, 
+ 967          dbio=True, 
+ 968          hideerror=False, 
+ 969          detect_record_change=False, 
+ 970          ): 
+
     971   
+ 972          """ 
+ 973          similar FORM.accepts but also does insert, update or delete in DAL. 
+ 974          but if detect_record_change == True than: 
+ 975            form.record_changed = False (record is properly validated/submitted) 
+ 976            form.record_changed = True (record cannot be submitted because changed) 
+ 977          elseif detect_record_change == False than: 
+ 978            form.record_changed = None 
+ 979          """ 
+ 980   
+ 981          if request_vars.__class__.__name__ == 'Request': 
+ 982              request_vars = request_vars.post_vars 
+ 983   
+ 984          keyed = hasattr(self.table, '_primarykey') 
+ 985   
+ 986          # implement logic to detect whether record exist but has been modified 
+ 987          # server side 
+ 988          self.record_changed = None 
+ 989          if detect_record_change: 
+ 990              if self.record: 
+ 991                  self.record_changed = False 
+ 992                  serialized = '|'.join(str(self.record[k]) for k in self.table.fields()) 
+ 993                  self.record_hash = md5_hash(serialized) 
+ 994   
+ 995          # logic to deal with record_id for keyed tables 
+ 996          if self.record: 
+ 997              if keyed: 
+ 998                  formname_id = '.'.join(str(self.record[k]) 
+ 999                                         for k in self.table._primarykey 
+1000                                         if hasattr(self.record,k)) 
+1001                  record_id = dict((k, request_vars[k]) for k in self.table._primarykey) 
+1002              else: 
+1003                  (formname_id, record_id) = (self.record.id, 
+1004                                              request_vars.get('id', None)) 
+1005              keepvalues = True 
+1006          else: 
+1007              if keyed: 
+1008                  formname_id = 'create' 
+1009                  record_id = dict([(k, None) for k in self.table._primarykey]) 
+1010              else: 
+1011                  (formname_id, record_id) = ('create', None) 
+1012   
+1013          if not keyed and isinstance(record_id, (list, tuple)): 
+1014              record_id = record_id[0] 
+1015   
+1016          if formname: 
+1017              formname = formname % dict(tablename = self.table._tablename, 
+1018                                         record_id = formname_id) 
+1019   
+1020          # ## THIS IS FOR UNIQUE RECORDS, read IS_NOT_IN_DB 
+1021   
+1022          for fieldname in self.fields: 
+1023              field = self.table[fieldname] 
+1024              requires = field.requires or [] 
+1025              if not isinstance(requires, (list, tuple)): 
+1026                  requires = [requires] 
+1027              [item.set_self_id(self.record_id) for item in requires 
+1028              if hasattr(item, 'set_self_id') and self.record_id] 
+1029   
+1030          # ## END 
+1031   
+1032          fields = {} 
+1033          for key in self.vars: 
+1034              fields[key] = self.vars[key] 
+1035   
+1036          ret = FORM.accepts( 
+1037              self, 
+1038              request_vars, 
+1039              session, 
+1040              formname, 
+1041              keepvalues, 
+1042              onvalidation, 
+1043              hideerror=hideerror, 
+1044              ) 
+1045   
+1046          if not ret and self.record and self.errors: 
+1047              ### if there are errors in update mode 
+1048              # and some errors refers to an already uploaded file 
+1049              # delete error if 
+1050              # - user not trying to upload a new file 
+1051              # - there is existing file and user is not trying to delete it 
+1052              # this is because removing the file may not pass validation 
+1053              for key in self.errors.keys(): 
+1054                  if key in self.table \ 
+1055                          and self.table[key].type == 'upload' \ 
+1056                          and request_vars.get(key, None) in (None, '') \ 
+1057                          and self.record[key] \ 
+1058                          and not key + UploadWidget.ID_DELETE_SUFFIX in request_vars: 
+1059                      del self.errors[key] 
+1060              if not self.errors: 
+1061                  ret = True 
+1062   
+1063          requested_delete = \ 
+1064              request_vars.get(self.FIELDNAME_REQUEST_DELETE, False) 
+1065   
+1066          self.custom.end = TAG[''](self.hidden_fields(), self.custom.end) 
+1067   
+1068          auch = record_id and self.errors and requested_delete 
+1069   
+1070          # auch is true when user tries to delete a record 
+1071          # that does not pass validation, yet it should be deleted 
+1072   
+1073          if not ret and not auch: 
+1074              for fieldname in self.fields: 
+1075                  field = self.table[fieldname] 
+1076                  ### this is a workaround! widgets should always have default not None! 
+1077                  if not field.widget and field.type.startswith('list:') and \ 
+1078                          not OptionsWidget.has_options(field): 
+1079                      field.widget = self.widgets.list.widget 
+1080                  if hasattr(field, 'widget') and field.widget and fieldname in request_vars: 
+1081                      if fieldname in self.vars: 
+1082                          value = self.vars[fieldname] 
+1083                      elif self.record: 
+1084                          value = self.record[fieldname] 
+1085                      else: 
+1086                          value = self.table[fieldname].default 
+1087                      row_id = '%s_%s%s' % (self.table, fieldname, SQLFORM.ID_ROW_SUFFIX) 
+1088                      widget = field.widget(field, value) 
+1089                      self.field_parent[row_id].components = [ widget ] 
+1090                      if not field.type.startswith('list:'): 
+1091                          self.field_parent[row_id]._traverse(False, hideerror) 
+1092                      self.custom.widget[ fieldname ] = widget 
+1093              return ret 
+1094   
+1095          if record_id and str(record_id) != str(self.record_id): 
+1096              raise SyntaxError, 'user is tampering with form\'s record_id: ' \ 
+1097                  '%s != %s' % (record_id, self.record_id) 
+1098   
+1099          if record_id and dbio: 
+1100              if keyed: 
+1101                  self.vars.update(record_id) 
+1102              else: 
+1103                  self.vars.id = self.record.id 
+1104   
+1105          if requested_delete and self.custom.deletable: 
+1106              if dbio: 
+1107                  if keyed: 
+1108                      qry = reduce(lambda x, y: x & y, 
+1109                                   [self.table[k] == record_id[k] for k in self.table._primarykey]) 
+1110                  else: 
+1111                      qry = self.table._id == self.record.id 
+1112                  self.table._db(qry).delete() 
+1113              self.errors.clear() 
+1114              for component in self.elements('input, select, textarea'): 
+1115                  component['_disabled'] = True 
+1116              return True 
+1117   
+1118          for fieldname in self.fields: 
+1119              if not fieldname in self.table.fields: 
+1120                  continue 
+1121   
+1122              if not self.ignore_rw and not self.table[fieldname].writable: 
+1123                  ### this happens because FORM has no knowledge of writable 
+1124                  ### and thinks that a missing boolean field is a None 
+1125                  if self.table[fieldname].type == 'boolean' and \ 
+1126                      self.vars.get(fieldname, True) == None: 
+1127                      del self.vars[fieldname] 
+1128                  continue 
+1129   
+1130              field = self.table[fieldname] 
+1131              if field.type == 'id': 
+1132                  continue 
+1133              if field.type == 'boolean': 
+1134                  if self.vars.get(fieldname, False): 
+1135                      self.vars[fieldname] = fields[fieldname] = True 
+1136                  else: 
+1137                      self.vars[fieldname] = fields[fieldname] = False 
+1138              elif field.type == 'password' and self.record\ 
+1139                  and request_vars.get(fieldname, None) == \ 
+1140                      PasswordWidget.DEFAULT_PASSWORD_DISPLAY: 
+1141                  continue  # do not update if password was not changed 
+1142              elif field.type == 'upload': 
+1143                  f = self.vars[fieldname] 
+1144                  fd = '%s__delete' % fieldname 
+1145                  if f == '' or f == None: 
+1146                      if self.vars.get(fd, False) or not self.record: 
+1147                          fields[fieldname] = '' 
+1148                      else: 
+1149                          fields[fieldname] = self.record[fieldname] 
+1150                      self.vars[fieldname] = fields[fieldname] 
+1151                      continue 
+1152                  elif hasattr(f, 'file'): 
+1153                      (source_file, original_filename) = (f.file, f.filename) 
+1154                  elif isinstance(f, (str, unicode)): 
+1155                      ### do not know why this happens, it should not 
+1156                      (source_file, original_filename) = \ 
+1157                          (cStringIO.StringIO(f), 'file.txt') 
+1158                  newfilename = field.store(source_file, original_filename) 
+1159                  # this line is for backward compatibility only 
+1160                  self.vars['%s_newfilename' % fieldname] = newfilename 
+1161                  fields[fieldname] = newfilename 
+1162                  if isinstance(field.uploadfield, str): 
+1163                      fields[field.uploadfield] = source_file.read() 
+1164                  # proposed by Hamdy (accept?) do we need fields at this point? 
+1165                  self.vars[fieldname] = fields[fieldname] 
+1166                  continue 
+1167              elif fieldname in self.vars: 
+1168                  fields[fieldname] = self.vars[fieldname] 
+1169              elif field.default == None and field.type != 'blob': 
+1170                  self.errors[fieldname] = 'no data' 
+1171                  return False 
+1172              value = fields.get(fieldname,None) 
+1173              if field.type == 'list:string': 
+1174                  if not isinstance(value, (tuple, list)): 
+1175                      fields[fieldname] = value and [value] or [] 
+1176              elif isinstance(field.type,str) and field.type.startswith('list:'): 
+1177                  if not isinstance(value, list): 
+1178                      fields[fieldname] = [safe_int(x) for x in (value and [value] or [])] 
+1179              elif field.type == 'integer': 
+1180                  if value != None: 
+1181                      fields[fieldname] = safe_int(value) 
+1182              elif field.type.startswith('reference'): 
+1183                  if value != None and isinstance(self.table, Table) and not keyed: 
+1184                      fields[fieldname] = safe_int(value) 
+1185              elif field.type == 'double': 
+1186                  if value != None: 
+1187                      fields[fieldname] = safe_float(value) 
+1188   
+1189          for fieldname in self.vars: 
+1190              if fieldname != 'id' and fieldname in self.table.fields\ 
+1191                   and not fieldname in fields and not fieldname\ 
+1192                   in request_vars: 
+1193                  fields[fieldname] = self.vars[fieldname] 
+1194   
+1195          if dbio:             
+1196              if 'delete_this_record' in fields: 
+1197                  # this should never happen but seems to happen to some 
+1198                  del fields['delete_this_record'] 
+1199              for field in self.table: 
+1200                  if not field.name in fields and field.writable==False: 
+1201                      if record_id: 
+1202                          fields[field.name] = self.record[field.name] 
+1203                      elif self.table[field.name].default!=None: 
+1204                          fields[field.name] = self.table[field.name].default 
+1205              if keyed: 
+1206                  if reduce(lambda x, y: x and y, record_id.values()): # if record_id 
+1207                      if fields: 
+1208                          qry = reduce(lambda x, y: x & y, 
+1209                              [self.table[k] == self.record[k] for k in self.table._primarykey]) 
+1210                          self.table._db(qry).update(**fields) 
+1211                  else: 
+1212                      pk = self.table.insert(**fields) 
+1213                      if pk: 
+1214                          self.vars.update(pk) 
+1215                      else: 
+1216                          ret = False 
+1217              else: 
+1218                  if record_id: 
+1219                      self.vars.id = self.record.id 
+1220                      if fields: 
+1221                          self.table._db(self.table._id == self.record.id).update(**fields) 
+1222                  else: 
+1223                      self.vars.id = self.table.insert(**fields) 
+1224          return ret 
+
    1225   
+1226      @staticmethod 
+
    1227 -    def factory(*fields, **attributes): 
+
    1228          """ 
+1229          generates a SQLFORM for the given fields. 
+1230   
+1231          Internally will build a non-database based data model 
+1232          to hold the fields. 
+1233          """ 
+1234          # Define a table name, this way it can be logical to our CSS. 
+1235          # And if you switch from using SQLFORM to SQLFORM.factory 
+1236          # your same css definitions will still apply. 
+1237   
+1238          table_name = attributes.get('table_name', 'no_table') 
+1239   
+1240          # So it won't interfear with SQLDB.define_table 
+1241          if 'table_name' in attributes: 
+1242              del attributes['table_name'] 
+1243   
+1244          return SQLFORM(DAL(None).define_table(table_name, *fields), **attributes) 
+
    1245   
+1246   
+
    1247 -class SQLTABLE(TABLE): 
+
    1248   
+1249      """ 
+1250      given a Rows object, as returned by a db().select(), generates 
+1251      an html table with the rows. 
+1252   
+1253      optional arguments: 
+1254   
+1255      :param linkto: URL (or lambda to generate a URL) to edit individual records 
+1256      :param upload: URL to download uploaded files 
+1257      :param orderby: Add an orderby link to column headers. 
+1258      :param headers: dictionary of headers to headers redefinions 
+1259                      headers can also be a string to gerenare the headers from data 
+1260                      for now only headers="fieldname:capitalize", 
+1261                      headers="labels" and headers=None are supported 
+1262      :param truncate: length at which to truncate text in table cells. 
+1263          Defaults to 16 characters. 
+1264      :param columns: a list or dict contaning the names of the columns to be shown 
+1265          Defaults to all 
+1266   
+1267      Optional names attributes for passed to the <table> tag 
+1268   
+1269      The keys of headers and columns must be of the form "tablename.fieldname" 
+1270   
+1271      Simple linkto example:: 
+1272   
+1273          rows = db.select(db.sometable.ALL) 
+1274          table = SQLTABLE(rows, linkto='someurl') 
+1275   
+1276      This will link rows[id] to .../sometable/value_of_id 
+1277   
+1278   
+1279      More advanced linkto example:: 
+1280   
+1281          def mylink(field, type, ref): 
+1282              return URL(r=request, args=[field]) 
+1283   
+1284          rows = db.select(db.sometable.ALL) 
+1285          table = SQLTABLE(rows, linkto=mylink) 
+1286   
+1287      This will link rows[id] to 
+1288          current_app/current_controlle/current_function/value_of_id 
+1289           
+1290      New Implements: 24 June 2011: 
+1291      ----------------------------- 
+1292       
+1293      :param selectid: The id you want to select 
+1294      :param renderstyle: Boolean render the style with the table 
+1295       
+1296      :param extracolums = [{'label':A('Extra',_href='#'), 
+1297                      'class': '', #class name of the header 
+1298                      'width':'', #width in pixels or % 
+1299                      'content':lambda row, rc: A('Edit',_href='edit/%s'%row.id),                      
+1300                      'selected': False #agregate class selected to this column 
+1301                      }] 
+1302                       
+1303                       
+1304      :param headers = {'table.id':{'label':'Id', 
+1305                             'class':'', #class name of the header 
+1306                             'width':'', #width in pixels or % 
+1307                             'truncate': 16, #truncate the content to... 
+1308                             'selected': False #agregate class selected to this column 
+1309                             },  
+1310                 'table.myfield':{'label':'My field', 
+1311                                  'class':'', #class name of the header 
+1312                                  'width':'', #width in pixels or % 
+1313                                  'truncate': 16, #truncate the content to... 
+1314                                  'selected': False #agregate class selected to this column 
+1315                                  }, 
+1316                 } 
+1317                  
+1318      table = SQLTABLE(rows, headers=headers, extracolums=extracolums) 
+1319   
+1320   
+1321      """ 
+1322   
+
    1323 -    def __init__( 
+1324          self, 
+1325          sqlrows, 
+1326          linkto=None, 
+1327          upload=None, 
+1328          orderby=None, 
+1329          headers={}, 
+1330          truncate=16, 
+1331          columns=None,         
+1332          th_link='', 
+1333          extracolumns=None, 
+1334          selectid=None, 
+1335          renderstyle=False, 
+1336          **attributes 
+1337          ): 
+
    1338   
+1339          TABLE.__init__(self, **attributes) 
+1340          self.components = [] 
+1341          self.attributes = attributes 
+1342          self.sqlrows = sqlrows 
+1343          (components, row) = (self.components, []) 
+1344          if not sqlrows: 
+1345              return 
+1346          if not columns: 
+1347              columns = sqlrows.colnames 
+1348          if headers=='fieldname:capitalize': 
+1349              headers = {} 
+1350              for c in columns: 
+1351                  headers[c] = ' '.join([w.capitalize() for w in c.split('.')[-1].split('_')]) 
+1352          elif headers=='labels': 
+1353              headers = {} 
+1354              for c in columns: 
+1355                  (t,f) = c.split('.') 
+1356                  field = sqlrows.db[t][f] 
+1357                  headers[c] = field.label 
+1358          if headers!=None: 
+1359              for c in columns:#new implement dict 
+1360                  if isinstance(headers.get(c, c), dict): 
+1361                      coldict = headers.get(c, c) 
+1362                      attrcol = dict() 
+1363                      if coldict['width']!="": 
+1364                          attrcol.update(_width=coldict['width']) 
+1365                      if coldict['class']!="": 
+1366                          attrcol.update(_class=coldict['class']) 
+1367                      row.append(TH(coldict['label'],**attrcol)) 
+1368                  elif orderby: 
+1369                      row.append(TH(A(headers.get(c, c), 
+1370                                      _href=th_link+'?orderby=' + c))) 
+1371                  else: 
+1372                      row.append(TH(headers.get(c, c))) 
+1373                       
+1374              if extracolumns:#new implement dict 
+1375                  for c in extracolumns: 
+1376                      attrcol = dict() 
+1377                      if c['width']!="": 
+1378                          attrcol.update(_width=c['width']) 
+1379                      if c['class']!="": 
+1380                          attrcol.update(_class=c['class']) 
+1381                      row.append(TH(c['label'],**attrcol)) 
+1382                       
+1383              components.append(THEAD(TR(*row))) 
+1384           
+1385   
+1386          tbody = [] 
+1387          for (rc, record) in enumerate(sqlrows): 
+1388              row = [] 
+1389              if rc % 2 == 0: 
+1390                  _class = 'even' 
+1391              else: 
+1392                  _class = 'odd' 
+1393                   
+1394              if selectid!=None:#new implement 
+1395                  if record.id==selectid: 
+1396                      _class += ' rowselected' 
+1397                       
+1398              for colname in columns: 
+1399                  if not table_field.match(colname): 
+1400                      if "_extra" in record and colname in record._extra: 
+1401                          r = record._extra[colname] 
+1402                          row.append(TD(r)) 
+1403                          continue 
+1404                      else: 
+1405                          raise KeyError("Column %s not found (SQLTABLE)" % colname) 
+1406                  (tablename, fieldname) = colname.split('.') 
+1407                  try: 
+1408                      field = sqlrows.db[tablename][fieldname] 
+1409                  except KeyError: 
+1410                      field = None 
+1411                  if tablename in record \ 
+1412                          and isinstance(record,Row) \ 
+1413                          and isinstance(record[tablename],Row): 
+1414                      r = record[tablename][fieldname] 
+1415                  elif fieldname in record: 
+1416                      r = record[fieldname] 
+1417                  else: 
+1418                      raise SyntaxError, 'something wrong in Rows object' 
+1419                  r_old = r 
+1420                  if not field: 
+1421                      pass 
+1422                  elif linkto and field.type == 'id': 
+1423                      try: 
+1424                          href = linkto(r, 'table', tablename) 
+1425                      except TypeError: 
+1426                          href = '%s/%s/%s' % (linkto, tablename, r_old) 
+1427                      r = A(r, _href=href) 
+1428                  elif field.type.startswith('reference'): 
+1429                      if linkto: 
+1430                          ref = field.type[10:] 
+1431                          try: 
+1432                              href = linkto(r, 'reference', ref) 
+1433                          except TypeError: 
+1434                              href = '%s/%s/%s' % (linkto, ref, r_old) 
+1435                              if ref.find('.') >= 0: 
+1436                                  tref,fref = ref.split('.') 
+1437                                  if hasattr(sqlrows.db[tref],'_primarykey'): 
+1438                                      href = '%s/%s?%s' % (linkto, tref, urllib.urlencode({fref:r})) 
+1439                          r = A(represent(field,r,record), _href=str(href)) 
+1440                      elif field.represent: 
+1441                          r = represent(field,r,record) 
+1442                  elif linkto and hasattr(field._table,'_primarykey') and fieldname in field._table._primarykey: 
+1443                      # have to test this with multi-key tables 
+1444                      key = urllib.urlencode(dict( [ \ 
+1445                                  ((tablename in record \ 
+1446                                        and isinstance(record, Row) \ 
+1447                                        and isinstance(record[tablename], Row)) and 
+1448                                   (k, record[tablename][k])) or (k, record[k]) \ 
+1449                                      for k in field._table._primarykey ] )) 
+1450                      r = A(r, _href='%s/%s?%s' % (linkto, tablename, key)) 
+1451                  elif field.type.startswith('list:'): 
+1452                      r = represent(field,r or [],record) 
+1453                  elif field.represent: 
+1454                      r = represent(field,r,record) 
+1455                  elif field.type == 'blob' and r: 
+1456                      r = 'DATA' 
+1457                  elif field.type == 'upload': 
+1458                      if upload and r: 
+1459                          r = A('file', _href='%s/%s' % (upload, r)) 
+1460                      elif r: 
+1461                          r = 'file' 
+1462                      else: 
+1463                          r = '' 
+1464                  elif field.type in ['string','text']: 
+1465                      r = str(field.formatter(r)) 
+1466                      ur = unicode(r, 'utf8')                     
+1467                      if headers!={}: #new implement dict 
+1468                          if isinstance(headers[colname],dict): 
+1469                              if isinstance(headers[colname]['truncate'], int) \ 
+1470                                      and len(ur)>headers[colname]['truncate']: 
+1471                                  r = ur[:headers[colname]['truncate'] - 3] 
+1472                                  r = r.encode('utf8') + '...' 
+1473                      elif truncate!=None and len(ur) > truncate: 
+1474                          r = ur[:truncate - 3].encode('utf8') + '...' 
+1475                           
+1476                  attrcol = dict()#new implement dict 
+1477                  if headers!={}: 
+1478                      if isinstance(headers[colname],dict): 
+1479                          colclass=headers[colname]['class'] 
+1480                          if headers[colname]['selected']: 
+1481                              colclass= str(headers[colname]['class'] + " colselected").strip() 
+1482                          if colclass!="": 
+1483                              attrcol.update(_class=colclass) 
+1484                           
+1485                  row.append(TD(r,**attrcol)) 
+1486                   
+1487              if extracolumns:#new implement dict 
+1488                  for c in extracolumns: 
+1489                      attrcol = dict() 
+1490                      colclass=c['class'] 
+1491                      if c['selected']: 
+1492                          colclass= str(c['class'] + " colselected").strip() 
+1493                      if colclass!="": 
+1494                          attrcol.update(_class=colclass) 
+1495                      contentfunc = c['content'] 
+1496                      row.append(TD(contentfunc(record, rc),**attrcol)) 
+1497                       
+1498              tbody.append(TR(_class=_class, *row)) 
+1499               
+1500          if renderstyle: 
+1501              components.append(STYLE(self.style())) 
+1502           
+1503          components.append(TBODY(*tbody)) 
+
    1504           
+1505       
+
    1506 -    def style(self): 
+
    1507           
+1508          css = ''' 
+1509          table tbody tr.odd { 
+1510              background-color: #DFD; 
+1511          } 
+1512          table tbody tr.even { 
+1513              background-color: #EFE; 
+1514          } 
+1515          table tbody tr.rowselected { 
+1516              background-color: #FDD; 
+1517          } 
+1518          table tbody tr td.colselected { 
+1519              background-color: #FDD; 
+1520          } 
+1521          table tbody tr:hover { 
+1522              background: #DDF; 
+1523          } 
+1524          ''' 
+1525           
+1526          return css 
+
    1527   
+1528  form_factory = SQLFORM.factory # for backward compatibility, deprecated 
+1529   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:04 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sqlhtml.AutocompleteWidget-class.html
Index: applications/examples/static/epydoc/web2py.gluon.sqlhtml.AutocompleteWidget-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sqlhtml.AutocompleteWidget-class.html
@@ -0,0 +1,294 @@
+
+
+
+
+  web2py.gluon.sqlhtml.AutocompleteWidget
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sqlhtml ::
+        Class AutocompleteWidget
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class AutocompleteWidget
    source code

    
+
    +object --+
+         |
+        AutocompleteWidget
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        request,
+        field,
+        id_field=1,
+        db=1,
+        orderby=1,
+        limitby=(0, 10),
+        keyword='_autocomplete_%(fieldname)s',
+        min_length=1)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    callback(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        field,
+        value,
+        **attributes)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        request,
+        field,
+        id_field=1,
+        db=1,
+        orderby=1,
+        limitby=(0, 10),
+        keyword='_autocomplete_%(fieldname)s',
+        min_length=1)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sqlhtml.BooleanWidget-class.html
Index: applications/examples/static/epydoc/web2py.gluon.sqlhtml.BooleanWidget-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sqlhtml.BooleanWidget-class.html
@@ -0,0 +1,273 @@
+
+
+
+
+  web2py.gluon.sqlhtml.BooleanWidget
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sqlhtml ::
+        Class BooleanWidget
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class BooleanWidget
    source code

    
+
    +object --+    
+         |    
+FormWidget --+
+             |
+            BooleanWidget
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    widget(field,
+        value,
+        **attributes)
    
+      generates an INPUT checkbox tag.    		
+            source code
+            
+          
    
+      
+    
    
+    
        
    Inherited from FormWidget (private):
+      _attributes
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    widget(field,
+        value,
+        **attributes)
+    
    Static Method
+  
    
+      		source code 
+    
    
+  
+  
    generates an INPUT checkbox tag.
    
+  see also: :meth:`FormWidget.widget`
+  
    
+    
    Overrides:
+      FormWidget.widget
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sqlhtml.CheckboxesWidget-class.html
Index: applications/examples/static/epydoc/web2py.gluon.sqlhtml.CheckboxesWidget-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sqlhtml.CheckboxesWidget-class.html
@@ -0,0 +1,280 @@
+
+
+
+
+  web2py.gluon.sqlhtml.CheckboxesWidget
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sqlhtml ::
+        Class CheckboxesWidget
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class CheckboxesWidget
    source code

    
+
    +object --+        
+         |        
+FormWidget --+    
+             |    
+ OptionsWidget --+
+                 |
+                CheckboxesWidget
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    widget(field,
+        value,
+        **attributes)
    
+      generates a TABLE tag, including INPUT checkboxes (multiple 
+      allowed)    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from OptionsWidget:
+      has_options
+      
    
+    
        
    Inherited from FormWidget (private):
+      _attributes
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    widget(field,
+        value,
+        **attributes)
+    
    Static Method
+  
    
+      		source code 
+    
    
+  
+  
    generates a TABLE tag, including INPUT checkboxes (multiple 
+  allowed)
    
+  see also: :meth:`FormWidget.widget`
+  
    
+    
    Overrides:
+      OptionsWidget.widget
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sqlhtml.DateWidget-class.html
Index: applications/examples/static/epydoc/web2py.gluon.sqlhtml.DateWidget-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sqlhtml.DateWidget-class.html
@@ -0,0 +1,214 @@
+
+
+
+
+  web2py.gluon.sqlhtml.DateWidget
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sqlhtml ::
+        Class DateWidget
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class DateWidget
    source code

    
+
    +object --+        
+         |        
+FormWidget --+    
+             |    
+  StringWidget --+
+                 |
+                DateWidget
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from StringWidget:
+      widget
+      
    
+    
        
    Inherited from FormWidget (private):
+      _attributes
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sqlhtml.DatetimeWidget-class.html
Index: applications/examples/static/epydoc/web2py.gluon.sqlhtml.DatetimeWidget-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sqlhtml.DatetimeWidget-class.html
@@ -0,0 +1,214 @@
+
+
+
+
+  web2py.gluon.sqlhtml.DatetimeWidget
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sqlhtml ::
+        Class DatetimeWidget
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class DatetimeWidget
    source code

    
+
    +object --+        
+         |        
+FormWidget --+    
+             |    
+  StringWidget --+
+                 |
+                DatetimeWidget
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from StringWidget:
+      widget
+      
    
+    
        
    Inherited from FormWidget (private):
+      _attributes
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sqlhtml.DecimalWidget-class.html
Index: applications/examples/static/epydoc/web2py.gluon.sqlhtml.DecimalWidget-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sqlhtml.DecimalWidget-class.html
@@ -0,0 +1,214 @@
+
+
+
+
+  web2py.gluon.sqlhtml.DecimalWidget
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sqlhtml ::
+        Class DecimalWidget
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class DecimalWidget
    source code

    
+
    +object --+        
+         |        
+FormWidget --+    
+             |    
+  StringWidget --+
+                 |
+                DecimalWidget
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from StringWidget:
+      widget
+      
    
+    
        
    Inherited from FormWidget (private):
+      _attributes
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sqlhtml.DoubleWidget-class.html
Index: applications/examples/static/epydoc/web2py.gluon.sqlhtml.DoubleWidget-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sqlhtml.DoubleWidget-class.html
@@ -0,0 +1,214 @@
+
+
+
+
+  web2py.gluon.sqlhtml.DoubleWidget
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sqlhtml ::
+        Class DoubleWidget
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class DoubleWidget
    source code

    
+
    +object --+        
+         |        
+FormWidget --+    
+             |    
+  StringWidget --+
+                 |
+                DoubleWidget
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from StringWidget:
+      widget
+      
    
+    
        
    Inherited from FormWidget (private):
+      _attributes
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sqlhtml.FormWidget-class.html
Index: applications/examples/static/epydoc/web2py.gluon.sqlhtml.FormWidget-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sqlhtml.FormWidget-class.html
@@ -0,0 +1,331 @@
+
+
+
+
+  web2py.gluon.sqlhtml.FormWidget
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sqlhtml ::
+        Class FormWidget
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class FormWidget
    source code

    
+
    +object --+
+         |
+        FormWidget
+
    
+
+
    Known Subclasses:
    
+
    
+    BooleanWidget,
+    OptionsWidget,
+    StringWidget,
+    PasswordWidget,
+    TextWidget,
+    UploadWidget
+
    
+
+
    
+helper for SQLFORM to generate form input fields (widget), related to 
+  the fieldtype

    
+
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    _attributes(field,
+        widget_attributes,
+        **attributes)
    
+      helper to build a common set of attributes    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    widget(field,
+        value,
+        **attributes)
    
+      generates the widget for the field.    		
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _attributes(field,
+        widget_attributes,
+        **attributes)
+    
    Static Method
+  
    
+      		source code 
+    
    
+  
+  
    helper to build a common set of attributes
    
+  :param field: the field involved, some attributes are derived from 
+  this :param widget_attributes:  widget related attributes :param 
+  attributes: any other supplied attributes
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    widget(field,
+        value,
+        **attributes)
+    
    Static Method
+  
    
+      		source code 
+    
    
+  
+  
    +
+generates the widget for the field.
+
+When serialized, will provide an INPUT tag:
+
+- id = tablename_fieldname
+- class = field.type
+- name = fieldname
+
+:param field: the field needing the widget
+:param value: value
+:param attributes: any other attributes to be applied
+
+
    
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sqlhtml.IntegerWidget-class.html
Index: applications/examples/static/epydoc/web2py.gluon.sqlhtml.IntegerWidget-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sqlhtml.IntegerWidget-class.html
@@ -0,0 +1,214 @@
+
+
+
+
+  web2py.gluon.sqlhtml.IntegerWidget
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sqlhtml ::
+        Class IntegerWidget
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IntegerWidget
    source code

    
+
    +object --+        
+         |        
+FormWidget --+    
+             |    
+  StringWidget --+
+                 |
+                IntegerWidget
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from StringWidget:
+      widget
+      
    
+    
        
    Inherited from FormWidget (private):
+      _attributes
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sqlhtml.ListWidget-class.html
Index: applications/examples/static/epydoc/web2py.gluon.sqlhtml.ListWidget-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sqlhtml.ListWidget-class.html
@@ -0,0 +1,276 @@
+
+
+
+
+  web2py.gluon.sqlhtml.ListWidget
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sqlhtml ::
+        Class ListWidget
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class ListWidget
    source code

    
+
    +object --+        
+         |        
+FormWidget --+    
+             |    
+  StringWidget --+
+                 |
+                ListWidget
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    widget(field,
+        value,
+        **attributes)
    
+      generates an INPUT text tag.    		
+            source code
+            
+          
    
+      
+    
    
+    
        
    Inherited from FormWidget (private):
+      _attributes
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    widget(field,
+        value,
+        **attributes)
+    
    Static Method
+  
    
+      		source code 
+    
    
+  
+  
    generates an INPUT text tag.
    
+  see also: :meth:`FormWidget.widget`
+  
    
+    
    Overrides:
+      StringWidget.widget
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sqlhtml.MultipleOptionsWidget-class.html
Index: applications/examples/static/epydoc/web2py.gluon.sqlhtml.MultipleOptionsWidget-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sqlhtml.MultipleOptionsWidget-class.html
@@ -0,0 +1,288 @@
+
+
+
+
+  web2py.gluon.sqlhtml.MultipleOptionsWidget
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sqlhtml ::
+        Class MultipleOptionsWidget
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class MultipleOptionsWidget
    source code

    
+
    +object --+        
+         |        
+FormWidget --+    
+             |    
+ OptionsWidget --+
+                 |
+                MultipleOptionsWidget
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    widget(field,
+        value,
+        size=5,
+        **attributes)
    
+      generates a SELECT tag, including OPTIONs (multiple options allowed)...    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from OptionsWidget:
+      has_options
+      
    
+    
        
    Inherited from FormWidget (private):
+      _attributes
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    widget(field,
+        value,
+        size=5,
+        **attributes)
+    
    Static Method
+  
    
+      		source code 
+    
    
+  
+  
    +
+generates a SELECT tag, including OPTIONs (multiple options allowed)
+
+see also: :meth:`FormWidget.widget`
+
+:param size: optional param (default=5) to indicate how many rows must
+    be shown
+
+
    
+  
    
+    
    Overrides:
+      OptionsWidget.widget
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sqlhtml.OptionsWidget-class.html
Index: applications/examples/static/epydoc/web2py.gluon.sqlhtml.OptionsWidget-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sqlhtml.OptionsWidget-class.html
@@ -0,0 +1,320 @@
+
+
+
+
+  web2py.gluon.sqlhtml.OptionsWidget
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sqlhtml ::
+        Class OptionsWidget
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class OptionsWidget
    source code

    
+
    +object --+    
+         |    
+FormWidget --+
+             |
+            OptionsWidget
+
    
+
+
    Known Subclasses:
    
+
    
+    CheckboxesWidget,
+    MultipleOptionsWidget,
+    RadioWidget
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    has_options(field)
    
+      checks if the field has selectable options    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    widget(field,
+        value,
+        **attributes)
    
+      generates a SELECT tag, including OPTIONs (only 1 option 
+      allowed)    		
+            source code
+            
+          
    
+      
+    
    
+    
        
    Inherited from FormWidget (private):
+      _attributes
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    has_options(field)
+    
    Static Method
+  
    
+      		source code 
+    
    
+  
+  
    checks if the field has selectable options
    
+  :param field: the field needing checking :returns: True if the field 
+  has options
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    widget(field,
+        value,
+        **attributes)
+    
    Static Method
+  
    
+      		source code 
+    
    
+  
+  
    generates a SELECT tag, including OPTIONs (only 1 option allowed)
    
+  see also: :meth:`FormWidget.widget`
+  
    
+    
    Overrides:
+      FormWidget.widget
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sqlhtml.PasswordWidget-class.html
Index: applications/examples/static/epydoc/web2py.gluon.sqlhtml.PasswordWidget-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sqlhtml.PasswordWidget-class.html
@@ -0,0 +1,299 @@
+
+
+
+
+  web2py.gluon.sqlhtml.PasswordWidget
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sqlhtml ::
+        Class PasswordWidget
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class PasswordWidget
    source code

    
+
    +object --+    
+         |    
+FormWidget --+
+             |
+            PasswordWidget
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    widget(field,
+        value,
+        **attributes)
    
+      generates a INPUT password tag.    		
+            source code
+            
+          
    
+      
+    
    
+    
        
    Inherited from FormWidget (private):
+      _attributes
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        DEFAULT_PASSWORD_DISPLAY = '********'
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    widget(field,
+        value,
+        **attributes)
+    
    Static Method
+  
    
+      		source code 
+    
    
+  
+  
    generates a INPUT password tag. If a value is present it will be shown
+  as a number of '*', not related to the length of the actual value.
    
+  see also: :meth:`FormWidget.widget`
+  
    
+    
    Overrides:
+      FormWidget.widget
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sqlhtml.RadioWidget-class.html
Index: applications/examples/static/epydoc/web2py.gluon.sqlhtml.RadioWidget-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sqlhtml.RadioWidget-class.html
@@ -0,0 +1,280 @@
+
+
+
+
+  web2py.gluon.sqlhtml.RadioWidget
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sqlhtml ::
+        Class RadioWidget
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class RadioWidget
    source code

    
+
    +object --+        
+         |        
+FormWidget --+    
+             |    
+ OptionsWidget --+
+                 |
+                RadioWidget
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    widget(field,
+        value,
+        **attributes)
    
+      generates a TABLE tag, including INPUT radios (only 1 option 
+      allowed)    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from OptionsWidget:
+      has_options
+      
    
+    
        
    Inherited from FormWidget (private):
+      _attributes
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    widget(field,
+        value,
+        **attributes)
+    
    Static Method
+  
    
+      		source code 
+    
    
+  
+  
    generates a TABLE tag, including INPUT radios (only 1 option 
+  allowed)
    
+  see also: :meth:`FormWidget.widget`
+  
    
+    
    Overrides:
+      OptionsWidget.widget
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sqlhtml.SQLFORM-class.html
Index: applications/examples/static/epydoc/web2py.gluon.sqlhtml.SQLFORM-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sqlhtml.SQLFORM-class.html
@@ -0,0 +1,587 @@
+
+
+
+
+  web2py.gluon.sqlhtml.SQLFORM
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sqlhtml ::
+        Class SQLFORM
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class SQLFORM
    source code

    
+
    +       object --+            
+                |            
+html.XmlComponent --+        
+                    |        
+             html.DIV --+    
+                        |    
+                html.FORM --+
+                            |
+                           SQLFORM
+
    
+
+
    
+
    +
+SQLFORM is used to map a table (and a current record) into an HTML form
+
+given a SQLTable stored in db.table
+
+generates an insert form::
+
+    SQLFORM(db.table)
+
+generates an update form::
+
+    record=db.table[some_id]
+    SQLFORM(db.table, record)
+
+generates an update with a delete button::
+
+    SQLFORM(db.table, record, deletable=True)
+
+if record is an int::
+
+    record=db.table[record]
+
+optional arguments:
+
+:param fields: a list of fields that should be placed in the form,
+    default is all.
+:param labels: a dictionary with labels for each field, keys are the field
+    names.
+:param col3: a dictionary with content for an optional third column
+        (right of each field). keys are field names.
+:param linkto: the URL of a controller/function to access referencedby
+    records
+        see controller appadmin.py for examples
+:param upload: the URL of a controller/function to download an uploaded file
+        see controller appadmin.py for examples
+
+any named optional attribute is passed to the <form> tag
+        for example _class, _id, _style, _action, _method, etc.
+
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__()
    
+      SQLFORM(db.table,...    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    createform(self,
+        xfields)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    accepts(self,
+        request_vars,
+        session=1,
+        formname='%(tablename)s/%(record_id)s',
+        keepvalues=True,
+        onvalidation=1,
+        dbio=True,
+        hideerror=True,
+        detect_record_change=True)
    
+      similar FORM.accepts but also does insert, update or delete in DAL.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from html.FORM:
+      hidden_fields,
+      process,
+      validate,
+      xml
+      
    
+    
        
    Inherited from html.FORM (private):
+      _postprocessing
+      
    
+    
    Inherited from html.DIV:
+      __delitem__,
+      __getitem__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update
+      
    
+    
        
    Inherited from html.DIV (private):
+      _fixup,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    factory(*fields,
+        **attributes)
    
+      generates a SQLFORM for the given fields.    		
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        widgets = <Storage {'multiple': <class 'web2py.gluon.sqlhtml.M...
+    
    
+       
+    
+        FIELDNAME_REQUEST_DELETE = 'delete_this_record'
+    
    
+       
+    
+        FIELDKEY_DELETE_RECORD = 'delete_record'
+    
    
+       
+    
+        ID_LABEL_SUFFIX = '__label'
+    
    
+       
+    
+        ID_ROW_SUFFIX = '__row'
+    
    
+    
    Inherited from html.FORM:
+      tag
+      
    
+    
    Inherited from html.DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__()
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
    +
+SQLFORM(db.table,
+       record=None,
+       fields=['name'],
+       labels={'name': 'Your name'},
+       linkto=URL(r=request, f='table/db/')
+
+
    
+  
    
+    
    Overrides:
+      html.FORM.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    accepts(self,
+        request_vars,
+        session=1,
+        formname='%(tablename)s/%(record_id)s',
+        keepvalues=True,
+        onvalidation=1,
+        dbio=True,
+        hideerror=True,
+        detect_record_change=True)
+  
    
+      		source code 
+    
    
+  
+  
    +
+similar FORM.accepts but also does insert, update or delete in DAL.
+but if detect_record_change == True than:
+  form.record_changed = False (record is properly validated/submitted)
+  form.record_changed = True (record cannot be submitted because changed)
+elseif detect_record_change == False than:
+  form.record_changed = None
+
+
    
+  
    
+    
    Overrides:
+      html.FORM.accepts
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    factory(*fields,
+        **attributes)
+    
    Static Method
+  
    
+      		source code 
+    
    
+  
+  
    generates a SQLFORM for the given fields.
    
+  Internally will build a non-database based data model to hold the 
+  fields.
+  
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    widgets
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +<Storage {'multiple': <class 'web2py.gluon.sqlhtml.MultipleOptionsWidg\
+et'>, 'string': <class 'web2py.gluon.sqlhtml.StringWidget'>, 'text': <\
+class 'web2py.gluon.sqlhtml.TextWidget'>, 'datetime': <class 'web2py.g\
+luon.sqlhtml.DatetimeWidget'>, 'boolean': <class 'web2py.gluon.sqlhtml\
+.BooleanWidget'>, 'radio': <class 'web2py.gluon.sqlhtml.RadioWidget'>,\
+ 'date': <class 'web2py.gluon.sqlhtml.DateWidget'>, 'integer': <class \
+'web2py.gluon.sqlhtml.IntegerWidget'>, 'password': <class 'web2py.gluo\
+n.sqlhtml.PasswordWidget'>, 'double': <class 'web2py.gluon.sqlhtml.Dou\
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sqlhtml.SQLTABLE-class.html
Index: applications/examples/static/epydoc/web2py.gluon.sqlhtml.SQLTABLE-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sqlhtml.SQLTABLE-class.html
@@ -0,0 +1,424 @@
+
+
+
+
+  web2py.gluon.sqlhtml.SQLTABLE
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sqlhtml ::
+        Class SQLTABLE
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class SQLTABLE
    source code

    
+
    +       object --+            
+                |            
+html.XmlComponent --+        
+                    |        
+             html.DIV --+    
+                        |    
+               html.TABLE --+
+                            |
+                           SQLTABLE
+
    
+
+
    
+
    +
+given a Rows object, as returned by a db().select(), generates
+an html table with the rows.
+
+optional arguments:
+
+:param linkto: URL (or lambda to generate a URL) to edit individual records
+:param upload: URL to download uploaded files
+:param orderby: Add an orderby link to column headers.
+:param headers: dictionary of headers to headers redefinions
+                headers can also be a string to gerenare the headers from data
+                for now only headers="fieldname:capitalize",
+                headers="labels" and headers=None are supported
+:param truncate: length at which to truncate text in table cells.
+    Defaults to 16 characters.
+:param columns: a list or dict contaning the names of the columns to be shown
+    Defaults to all
+
+Optional names attributes for passed to the <table> tag
+
+The keys of headers and columns must be of the form "tablename.fieldname"
+
+Simple linkto example::
+
+    rows = db.select(db.sometable.ALL)
+    table = SQLTABLE(rows, linkto='someurl')
+
+This will link rows[id] to .../sometable/value_of_id
+
+
+More advanced linkto example::
+
+    def mylink(field, type, ref):
+        return URL(r=request, args=[field])
+
+    rows = db.select(db.sometable.ALL)
+    table = SQLTABLE(rows, linkto=mylink)
+
+This will link rows[id] to
+    current_app/current_controlle/current_function/value_of_id
+    
+New Implements: 24 June 2011:
+-----------------------------
+
+:param selectid: The id you want to select
+:param renderstyle: Boolean render the style with the table
+
+:param extracolums = [{'label':A('Extra',_href='#'),
+                'class': '', #class name of the header
+                'width':'', #width in pixels or %
+                'content':lambda row, rc: A('Edit',_href='edit/%s'%row.id),                     
+                'selected': False #agregate class selected to this column
+                }]
+                
+                
+:param headers = {'table.id':{'label':'Id',
+                       'class':'', #class name of the header
+                       'width':'', #width in pixels or %
+                       'truncate': 16, #truncate the content to...
+                       'selected': False #agregate class selected to this column
+                       }, 
+           'table.myfield':{'label':'My field',
+                            'class':'', #class name of the header
+                            'width':'', #width in pixels or %
+                            'truncate': 16, #truncate the content to...
+                            'selected': False #agregate class selected to this column
+                            },
+           }
+           
+table = SQLTABLE(rows, headers=headers, extracolums=extracolums)
+
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        sqlrows,
+        linkto=1,
+        upload=1,
+        orderby=1,
+        headers={},
+        truncate=16,
+        columns=1,
+        th_link='',
+        extracolumns=1,
+        selectid=1,
+        renderstyle=True,
+        **attributes)
    
+      :param *components: any components that should be nested in this 
+      element :param **attributes: any attributes you want to give to this 
+      element    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    style(self)
+            source code
+            
+          
    
+      
+    
    
+    
        
    Inherited from html.TABLE (private):
+      _fixup
+      
    
+    
    Inherited from html.DIV:
+      __delitem__,
+      __getitem__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update,
+      xml
+      
    
+    
        
    Inherited from html.DIV (private):
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _validate,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+    
    Inherited from html.TABLE:
+      tag
+      
    
+    
    Inherited from html.DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        sqlrows,
+        linkto=1,
+        upload=1,
+        orderby=1,
+        headers={},
+        truncate=16,
+        columns=1,
+        th_link='',
+        extracolumns=1,
+        selectid=1,
+        renderstyle=True,
+        **attributes)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
    :param *components: any components that should be nested in this 
+  element :param **attributes: any attributes you want to give to this 
+  element
    
+  :raises SyntaxError: when a stand alone tag receives components
+  
    
+    
    Overrides:
+      html.DIV.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sqlhtml.StringWidget-class.html
Index: applications/examples/static/epydoc/web2py.gluon.sqlhtml.StringWidget-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sqlhtml.StringWidget-class.html
@@ -0,0 +1,284 @@
+
+
+
+
+  web2py.gluon.sqlhtml.StringWidget
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sqlhtml ::
+        Class StringWidget
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class StringWidget
    source code

    
+
    +object --+    
+         |    
+FormWidget --+
+             |
+            StringWidget
+
    
+
+
    Known Subclasses:
    
+
    
+    DateWidget,
+    DatetimeWidget,
+    DecimalWidget,
+    DoubleWidget,
+    IntegerWidget,
+    ListWidget,
+    TimeWidget
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    widget(field,
+        value,
+        **attributes)
    
+      generates an INPUT text tag.    		
+            source code
+            
+          
    
+      
+    
    
+    
        
    Inherited from FormWidget (private):
+      _attributes
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    widget(field,
+        value,
+        **attributes)
+    
    Static Method
+  
    
+      		source code 
+    
    
+  
+  
    generates an INPUT text tag.
    
+  see also: :meth:`FormWidget.widget`
+  
    
+    
    Overrides:
+      FormWidget.widget
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sqlhtml.TextWidget-class.html
Index: applications/examples/static/epydoc/web2py.gluon.sqlhtml.TextWidget-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sqlhtml.TextWidget-class.html
@@ -0,0 +1,273 @@
+
+
+
+
+  web2py.gluon.sqlhtml.TextWidget
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sqlhtml ::
+        Class TextWidget
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class TextWidget
    source code

    
+
    +object --+    
+         |    
+FormWidget --+
+             |
+            TextWidget
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    widget(field,
+        value,
+        **attributes)
    
+      generates a TEXTAREA tag.    		
+            source code
+            
+          
    
+      
+    
    
+    
        
    Inherited from FormWidget (private):
+      _attributes
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    widget(field,
+        value,
+        **attributes)
+    
    Static Method
+  
    
+      		source code 
+    
    
+  
+  
    generates a TEXTAREA tag.
    
+  see also: :meth:`FormWidget.widget`
+  
    
+    
    Overrides:
+      FormWidget.widget
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sqlhtml.TimeWidget-class.html
Index: applications/examples/static/epydoc/web2py.gluon.sqlhtml.TimeWidget-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sqlhtml.TimeWidget-class.html
@@ -0,0 +1,214 @@
+
+
+
+
+  web2py.gluon.sqlhtml.TimeWidget
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sqlhtml ::
+        Class TimeWidget
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class TimeWidget
    source code

    
+
    +object --+        
+         |        
+FormWidget --+    
+             |    
+  StringWidget --+
+                 |
+                TimeWidget
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from StringWidget:
+      widget
+      
    
+    
        
    Inherited from FormWidget (private):
+      _attributes
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.sqlhtml.UploadWidget-class.html
Index: applications/examples/static/epydoc/web2py.gluon.sqlhtml.UploadWidget-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.sqlhtml.UploadWidget-class.html
@@ -0,0 +1,426 @@
+
+
+
+
+  web2py.gluon.sqlhtml.UploadWidget
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module sqlhtml ::
+        Class UploadWidget
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class UploadWidget
    source code

    
+
    +object --+    
+         |    
+FormWidget --+
+             |
+            UploadWidget
+
    
+
+
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    widget(field,
+        value,
+        download_url=1,
+        **attributes)
    
+      generates a INPUT file tag.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    represent(field,
+        value,
+        download_url=1)
    
+      how to represent the file:...    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    is_image(value)
    
+      Tries to check if the filename provided references to an image
+
+Checking is based on filename extension.    		
+            source code
+            
+          
    
+      
+    
    
+    
        
    Inherited from FormWidget (private):
+      _attributes
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        DEFAULT_WIDTH = '150px'
+    
    
+       
+    
+        ID_DELETE_SUFFIX = '__delete'
+    
    
+       
+    
+        GENERIC_DESCRIPTION = 'file'
+    
    
+       
+    
+        DELETE_FILE = 'delete'
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    widget(field,
+        value,
+        download_url=1,
+        **attributes)
+    
    Static Method
+  
    
+      		source code 
+    
    
+  
+  
    generates a INPUT file tag.
    
+  
    Optionally provides an A link to the file, including a checkbox so the
+  file can be deleted. All is wrapped in a DIV.
    
+  
    see also: :meth:`FormWidget.widget`
    
+  :param download_url: Optional URL to link to the file (default = 
+  None)
+  
    
+    
    Overrides:
+      FormWidget.widget
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    represent(field,
+        value,
+        download_url=1)
+    
    Static Method
+  
    
+      		source code 
+    
    
+  
+  
    +
+how to represent the file:
+
+- with download url and if it is an image: <A href=...><IMG ...></A>
+- otherwise with download url: <A href=...>file</A>
+- otherwise: file
+
+:param field: the field
+:param value: the field value
+:param download_url: url for the file download (default = None)
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    is_image(value)
+    
    Static Method
+  
    
+      		source code 
+    
    
+  
+  
    +
+Tries to check if the filename provided references to an image
+
+Checking is based on filename extension. Currently recognized:
+   gif, png, jp(e)g, bmp
+
+:param value: filename
+
+
    
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.storage-module.html
Index: applications/examples/static/epydoc/web2py.gluon.storage-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.storage-module.html
@@ -0,0 +1,238 @@
+
+
+
+
+  web2py.gluon.storage
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module storage
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module storage
    source code

    
+
    +
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+Provides:
+
+- List; like list but returns None instead of IndexOutOfBounds
+- Storage; like dictionary allowing also for `obj.foo` for `obj['foo']`
+
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        List
    
+      Like a regular python list but a[i] if i is out of bounds return
+        None instead of IndexOutOfBounds
+    
    
+       
+    
+        Storage
    
+      A Storage object is like a dictionary except `obj.foo` can be 
+        used in addition to `obj['foo']`.
+    
    
+       
+    
+        StorageList
    
+      like Storage but missing elements default to [] instead of 
+        None
+    
    
+       
+    
+        Settings
+    
    
+       
+    
+        Messages
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    load_storage(filename)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    save_storage(storage,
+        filename)
+            source code
+            
+          
    
+      
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.storage-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.storage-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.storage-pysrc.html
@@ -0,0 +1,361 @@
+
+
+
+
+  web2py.gluon.storage
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module storage
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.storage
    
+
    +  1  #!/usr/bin/env python 
+  2  # -*- coding: utf-8 -*- 
+  3   
+  4  """ 
+  5  This file is part of the web2py Web Framework 
+  6  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+  7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+  8   
+  9  Provides: 
+ 10   
+ 11  - List; like list but returns None instead of IndexOutOfBounds 
+ 12  - Storage; like dictionary allowing also for `obj.foo` for `obj['foo']` 
+ 13  """ 
+ 14   
+ 15  import cPickle 
+ 16  import portalocker 
+ 17   
+ 18  __all__ = ['List', 'Storage', 'Settings', 'Messages', 
+ 19             'StorageList', 'load_storage', 'save_storage'] 
+ 20   
+ 21   
+
     22 -class List(list): 
+
     23      """ 
+ 24      Like a regular python list but a[i] if i is out of bounds return None 
+ 25      instead of IndexOutOfBounds 
+ 26      """ 
+ 27   
+
     28 -    def __call__(self, i, default=None): 
+
     29          if 0<=i<len(self): 
+ 30              return self[i] 
+ 31          else: 
+ 32              return default 
+
     33   
+
     34 -class Storage(dict): 
+
     35   
+ 36      """ 
+ 37      A Storage object is like a dictionary except `obj.foo` can be used 
+ 38      in addition to `obj['foo']`. 
+ 39   
+ 40          >>> o = Storage(a=1) 
+ 41          >>> print o.a 
+ 42          1 
+ 43   
+ 44          >>> o['a'] 
+ 45          1 
+ 46   
+ 47          >>> o.a = 2 
+ 48          >>> print o['a'] 
+ 49          2 
+ 50   
+ 51          >>> del o.a 
+ 52          >>> print o.a 
+ 53          None 
+ 54   
+ 55      """ 
+ 56   
+
     57 -    def __getattr__(self, key): 
+
     58          if key in self: 
+ 59              return self[key] 
+ 60          else: 
+ 61              return None 
+
     62   
+
     63 -    def __setattr__(self, key, value): 
+
     64          if value == None: 
+ 65              if key in self: 
+ 66                  del self[key] 
+ 67          else: 
+ 68              self[key] = value 
+
     69   
+
     70 -    def __delattr__(self, key): 
+
     71          if key in self: 
+ 72              del self[key] 
+ 73          else: 
+ 74              raise AttributeError, "missing key=%s" % key 
+
     75   
+
     76 -    def __repr__(self): 
+
     77          return '<Storage ' + dict.__repr__(self) + '>' 
+
     78   
+
     79 -    def __getstate__(self): 
+
     80          return dict(self) 
+
     81   
+
     82 -    def __setstate__(self, value): 
+
     83          for (k, v) in value.items(): 
+ 84              self[k] = v 
+
     85   
+
     86 -    def getlist(self, key): 
+
     87          """Return a Storage value as a list. 
+ 88   
+ 89          If the value is a list it will be returned as-is. 
+ 90          If object is None, an empty list will be returned. 
+ 91          Otherwise, [value] will be returned. 
+ 92   
+ 93          Example output for a query string of ?x=abc&y=abc&y=def 
+ 94          >>> request = Storage() 
+ 95          >>> request.vars = Storage() 
+ 96          >>> request.vars.x = 'abc' 
+ 97          >>> request.vars.y = ['abc', 'def'] 
+ 98          >>> request.vars.getlist('x') 
+ 99          ['abc'] 
+100          >>> request.vars.getlist('y') 
+101          ['abc', 'def'] 
+102          >>> request.vars.getlist('z') 
+103          [] 
+104   
+105          """ 
+106          value = self.get(key, None) 
+107          if isinstance(value, (list, tuple)): 
+108              return value 
+109          elif value is None: 
+110              return [] 
+111          return [value] 
+
    112   
+
    113 -    def getfirst(self, key): 
+
    114          """Return the first or only value when given a request.vars-style key. 
+115   
+116          If the value is a list, its first item will be returned; 
+117          otherwise, the value will be returned as-is. 
+118   
+119          Example output for a query string of ?x=abc&y=abc&y=def 
+120          >>> request = Storage() 
+121          >>> request.vars = Storage() 
+122          >>> request.vars.x = 'abc' 
+123          >>> request.vars.y = ['abc', 'def'] 
+124          >>> request.vars.getfirst('x') 
+125          'abc' 
+126          >>> request.vars.getfirst('y') 
+127          'abc' 
+128          >>> request.vars.getfirst('z') 
+129   
+130          """ 
+131          value = self.getlist(key) 
+132          if len(value): 
+133              return value[0] 
+134          return None 
+
    135   
+
    136 -    def getlast(self, key): 
+
    137          """Returns the last or only single value when given a request.vars-style key. 
+138   
+139          If the value is a list, the last item will be returned; 
+140          otherwise, the value will be returned as-is. 
+141   
+142          Simulated output with a query string of ?x=abc&y=abc&y=def 
+143          >>> request = Storage() 
+144          >>> request.vars = Storage() 
+145          >>> request.vars.x = 'abc' 
+146          >>> request.vars.y = ['abc', 'def'] 
+147          >>> request.vars.getlast('x') 
+148          'abc' 
+149          >>> request.vars.getlast('y') 
+150          'def' 
+151          >>> request.vars.getlast('z') 
+152   
+153          """ 
+154          value = self.getlist(key) 
+155          if len(value): 
+156              return value[-1] 
+157          return None 
+
    158   
+
    159 -class StorageList(Storage): 
+
    160      """ 
+161      like Storage but missing elements default to [] instead of None 
+162      """ 
+
    163 -    def __getattr__(self, key): 
+
    164          if key in self: 
+165              return self[key] 
+166          else: 
+167              self[key] = [] 
+168              return self[key] 
+
    169   
+
    170 -def load_storage(filename): 
+
    171      fp = open(filename, 'rb') 
+172      try: 
+173          portalocker.lock(fp, portalocker.LOCK_EX) 
+174          storage = cPickle.load(fp) 
+175          portalocker.unlock(fp) 
+176      finally: 
+177          fp.close() 
+178      return Storage(storage) 
+
    179   
+180   
+
    181 -def save_storage(storage, filename): 
+
    182      fp = open(filename, 'wb') 
+183      try: 
+184          portalocker.lock(fp, portalocker.LOCK_EX) 
+185          cPickle.dump(dict(storage), fp) 
+186          portalocker.unlock(fp) 
+187      finally: 
+188          fp.close() 
+
    189   
+190   
+
    191 -class Settings(Storage): 
+
    192   
+
    193 -    def __setattr__(self, key, value): 
+
    194          if key != 'lock_keys' and self.get('lock_keys', None)\ 
+195               and not key in self: 
+196              raise SyntaxError, 'setting key \'%s\' does not exist' % key 
+197          if key != 'lock_values' and self.get('lock_values', None): 
+198              raise SyntaxError, 'setting value cannot be changed: %s' % key 
+199          self[key] = value 
+
    200   
+201   
+
    202 -class Messages(Storage): 
+
    203   
+
    204 -    def __init__(self, T): 
+
    205          self['T'] = T 
+
    206   
+
    207 -    def __setattr__(self, key, value): 
+
    208          if key != 'lock_keys' and self.get('lock_keys', None)\ 
+209               and not key in self: 
+210              raise SyntaxError, 'setting key \'%s\' does not exist' % key 
+211          if key != 'lock_values' and self.get('lock_values', None): 
+212              raise SyntaxError, 'setting value cannot be changed: %s' % key 
+213          self[key] = value 
+
    214   
+
    215 -    def __getattr__(self, key): 
+
    216          value = self[key] 
+217          if isinstance(value, str): 
+218              return str(self['T'](value)) 
+219          return value 
+
    220   
+221  if __name__ == '__main__': 
+222      import doctest 
+223      doctest.testmod() 
+224   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:05 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.storage.List-class.html
Index: applications/examples/static/epydoc/web2py.gluon.storage.List-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.storage.List-class.html
@@ -0,0 +1,237 @@
+
+
+
+
+  web2py.gluon.storage.List
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module storage ::
+        Class List
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class List
    source code

    
+
    +object --+    
+         |    
+      list --+
+             |
+            List
+
    
+
+
    
+Like a regular python list but a[i] if i is out of bounds return None 
+  instead of IndexOutOfBounds

    
+
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        i,
+        default=1)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from list:
+      __add__,
+      __contains__,
+      __delitem__,
+      __delslice__,
+      __eq__,
+      __ge__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __gt__,
+      __hash__,
+      __iadd__,
+      __imul__,
+      __init__,
+      __iter__,
+      __le__,
+      __len__,
+      __lt__,
+      __mul__,
+      __ne__,
+      __new__,
+      __repr__,
+      __reversed__,
+      __rmul__,
+      __setitem__,
+      __setslice__,
+      append,
+      count,
+      extend,
+      index,
+      insert,
+      pop,
+      remove,
+      reverse,
+      sort
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __reduce__,
+      __reduce_ex__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.storage.Messages-class.html
Index: applications/examples/static/epydoc/web2py.gluon.storage.Messages-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.storage.Messages-class.html
@@ -0,0 +1,373 @@
+
+
+
+
+  web2py.gluon.storage.Messages
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module storage ::
+        Class Messages
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Messages
    source code

    
+
    +object --+        
+         |        
+      dict --+    
+             |    
+       Storage --+
+                 |
+                Messages
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        T)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __setattr__(self,
+        key,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getattr__(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Storage:
+      __delattr__,
+      __getstate__,
+      __repr__,
+      __setstate__,
+      getfirst,
+      getlast,
+      getlist
+      
    
+    
    Inherited from dict:
+      __cmp__,
+      __contains__,
+      __delitem__,
+      __eq__,
+      __ge__,
+      __getattribute__,
+      __getitem__,
+      __gt__,
+      __hash__,
+      __iter__,
+      __le__,
+      __len__,
+      __lt__,
+      __ne__,
+      __new__,
+      __setitem__,
+      clear,
+      copy,
+      fromkeys,
+      get,
+      has_key,
+      items,
+      iteritems,
+      iterkeys,
+      itervalues,
+      keys,
+      pop,
+      popitem,
+      setdefault,
+      update,
+      values
+      
    
+    
    Inherited from object:
+      __reduce__,
+      __reduce_ex__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        T)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Returns:
    
+        
    +new empty dictionary
+
+
    
+    
    Overrides:
+      dict.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __setattr__(self,
+        key,
+        value)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      Storage.__setattr__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __getattr__(self,
+        key)
+    
    (Qualification operator)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      Storage.__getattr__
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.storage.Settings-class.html
Index: applications/examples/static/epydoc/web2py.gluon.storage.Settings-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.storage.Settings-class.html
@@ -0,0 +1,284 @@
+
+
+
+
+  web2py.gluon.storage.Settings
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module storage ::
+        Class Settings
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Settings
    source code

    
+
    +object --+        
+         |        
+      dict --+    
+             |    
+       Storage --+
+                 |
+                Settings
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __setattr__(self,
+        key,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Storage:
+      __delattr__,
+      __getattr__,
+      __getstate__,
+      __repr__,
+      __setstate__,
+      getfirst,
+      getlast,
+      getlist
+      
    
+    
    Inherited from dict:
+      __cmp__,
+      __contains__,
+      __delitem__,
+      __eq__,
+      __ge__,
+      __getattribute__,
+      __getitem__,
+      __gt__,
+      __hash__,
+      __init__,
+      __iter__,
+      __le__,
+      __len__,
+      __lt__,
+      __ne__,
+      __new__,
+      __setitem__,
+      clear,
+      copy,
+      fromkeys,
+      get,
+      has_key,
+      items,
+      iteritems,
+      iterkeys,
+      itervalues,
+      keys,
+      pop,
+      popitem,
+      setdefault,
+      update,
+      values
+      
    
+    
    Inherited from object:
+      __reduce__,
+      __reduce_ex__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __setattr__(self,
+        key,
+        value)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      Storage.__setattr__
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.storage.Storage-class.html
Index: applications/examples/static/epydoc/web2py.gluon.storage.Storage-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.storage.Storage-class.html
@@ -0,0 +1,578 @@
+
+
+
+
+  web2py.gluon.storage.Storage
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module storage ::
+        Class Storage
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Storage
    source code

    
+
    +object --+    
+         |    
+      dict --+
+             |
+            Storage
+
    
+
+
    Known Subclasses:
    
+
    
+    globals.Request,
+    globals.Response,
+    globals.Session,
+    Messages,
+    Settings,
+    StorageList,
+    restricted.TicketStorage
+
    
+
+
    
+A Storage object is like a dictionary except `obj.foo` can be used in 
+  addition to `obj['foo']`.
+
    +>>> o = Storage(a=1)
+>>> print o.a
+1
    
+
    +>>> o['a']
+1
    
+
    +>>> o.a = 2
+>>> print o['a']
+2
    
+
    +>>> del o.a
+>>> print o.a
+None


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __delattr__(self,
+        key)
    
+      x.__delattr__('name') <==> del x.name    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getattr__(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getstate__(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __repr__(self)
    
+      repr(x)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __setattr__(self,
+        key,
+        value)
    
+      x.__setattr__('name', value) <==> x.name = value    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __setstate__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    getfirst(self,
+        key)
    
+      Return the first or only value when given a request.vars-style 
+      key.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    getlast(self,
+        key)
    
+      Returns the last or only single value when given a 
+      request.vars-style key.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    getlist(self,
+        key)
    
+      Return a Storage value as a list.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from dict:
+      __cmp__,
+      __contains__,
+      __delitem__,
+      __eq__,
+      __ge__,
+      __getattribute__,
+      __getitem__,
+      __gt__,
+      __hash__,
+      __init__,
+      __iter__,
+      __le__,
+      __len__,
+      __lt__,
+      __ne__,
+      __new__,
+      __setitem__,
+      clear,
+      copy,
+      fromkeys,
+      get,
+      has_key,
+      items,
+      iteritems,
+      iterkeys,
+      itervalues,
+      keys,
+      pop,
+      popitem,
+      setdefault,
+      update,
+      values
+      
    
+    
    Inherited from object:
+      __reduce__,
+      __reduce_ex__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __delattr__(self,
+        key)
+  
    
+      		source code 
+    
    
+  
+  x.__delattr__('name') <==> del x.name
+  
    
+    
    Overrides:
+      object.__delattr__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __repr__(self)
+    
    (Representation operator)
+  
    
+      		source code 
+    
    
+  
+  repr(x)
+  
    
+    
    Overrides:
+      dict.__repr__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __setattr__(self,
+        key,
+        value)
+  
    
+      		source code 
+    
    
+  
+  x.__setattr__('name', value) <==> x.name = value
+  
    
+    
    Overrides:
+      object.__setattr__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    getfirst(self,
+        key)
+  
    
+      		source code 
+    
    
+  
+  
    Return the first or only value when given a request.vars-style 
+  key.
    
+  
    If the value is a list, its first item will be returned; otherwise, 
+  the value will be returned as-is.
    
+  Example output for a query string of ?x=abc&y=abc&y=def 
+  >>> request = Storage() >>> request.vars = Storage() 
+  >>> request.vars.x = 'abc' >>> request.vars.y = ['abc',
+  'def'] >>> request.vars.getfirst('x') 'abc' >>> 
+  request.vars.getfirst('y') 'abc' >>> 
+  request.vars.getfirst('z')
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    getlast(self,
+        key)
+  
    
+      		source code 
+    
    
+  
+  
    Returns the last or only single value when given a request.vars-style 
+  key.
    
+  
    If the value is a list, the last item will be returned; otherwise, the
+  value will be returned as-is.
    
+  Simulated output with a query string of ?x=abc&y=abc&y=def 
+  >>> request = Storage() >>> request.vars = Storage() 
+  >>> request.vars.x = 'abc' >>> request.vars.y = ['abc',
+  'def'] >>> request.vars.getlast('x') 'abc' >>> 
+  request.vars.getlast('y') 'def' >>> 
+  request.vars.getlast('z')
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    getlist(self,
+        key)
+  
    
+      		source code 
+    
    
+  
+  
    Return a Storage value as a list.
    
+  
    If the value is a list it will be returned as-is. If object is None, 
+  an empty list will be returned. Otherwise, [value] will be returned.
    
+  Example output for a query string of ?x=abc&y=abc&y=def 
+  >>> request = Storage() >>> request.vars = Storage() 
+  >>> request.vars.x = 'abc' >>> request.vars.y = ['abc',
+  'def'] >>> request.vars.getlist('x') ['abc'] >>> 
+  request.vars.getlist('y') ['abc', 'def'] >>> 
+  request.vars.getlist('z') []
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.storage.StorageList-class.html
Index: applications/examples/static/epydoc/web2py.gluon.storage.StorageList-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.storage.StorageList-class.html
@@ -0,0 +1,285 @@
+
+
+
+
+  web2py.gluon.storage.StorageList
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module storage ::
+        Class StorageList
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class StorageList
    source code

    
+
    +object --+        
+         |        
+      dict --+    
+             |    
+       Storage --+
+                 |
+                StorageList
+
    
+
+
    
+like Storage but missing elements default to [] instead of None

    
+
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getattr__(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Storage:
+      __delattr__,
+      __getstate__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      getfirst,
+      getlast,
+      getlist
+      
    
+    
    Inherited from dict:
+      __cmp__,
+      __contains__,
+      __delitem__,
+      __eq__,
+      __ge__,
+      __getattribute__,
+      __getitem__,
+      __gt__,
+      __hash__,
+      __init__,
+      __iter__,
+      __le__,
+      __len__,
+      __lt__,
+      __ne__,
+      __new__,
+      __setitem__,
+      clear,
+      copy,
+      fromkeys,
+      get,
+      has_key,
+      items,
+      iteritems,
+      iterkeys,
+      itervalues,
+      keys,
+      pop,
+      popitem,
+      setdefault,
+      update,
+      values
+      
    
+    
    Inherited from object:
+      __reduce__,
+      __reduce_ex__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __getattr__(self,
+        key)
+    
    (Qualification operator)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      Storage.__getattr__
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.streamer-module.html
Index: applications/examples/static/epydoc/web2py.gluon.streamer-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.streamer-module.html
@@ -0,0 +1,214 @@
+
+
+
+
+  web2py.gluon.streamer
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module streamer
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module streamer
    source code

    
+This file is part of the web2py Web Framework Copyrighted by Massimo 
+  Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    streamer(stream,
+        chunk_size=65536,
+        bytes=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    stream_file_or_304_or_206(static_file,
+        chunk_size=65536,
+        request=1,
+        headers={},
+        error_message=1)
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        regex_start_range = re.compile(r'\d+(?=-)')
+    
    
+       
+    
+        regex_stop_range = re.compile(r'(?<=-)\d+')
+    
    
+       
+    
+        DEFAULT_CHUNK_SIZE = 65536
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.streamer-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.streamer-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.streamer-pysrc.html
@@ -0,0 +1,245 @@
+
+
+
+
+  web2py.gluon.streamer
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module streamer
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.streamer
    
+
    +  1  #!/usr/bin/env python 
+  2  # -*- coding: utf-8 -*- 
+  3   
+  4  """ 
+  5  This file is part of the web2py Web Framework 
+  6  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+  7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+  8  """ 
+  9   
+ 10  import os 
+ 11  import stat 
+ 12  import time 
+ 13  import re 
+ 14  import errno 
+ 15  import rewrite 
+ 16  from http import HTTP 
+ 17  from contenttype import contenttype 
+ 18   
+ 19   
+ 20  regex_start_range = re.compile('\d+(?=\-)') 
+ 21  regex_stop_range = re.compile('(?<=\-)\d+') 
+ 22   
+ 23  DEFAULT_CHUNK_SIZE = 64*1024 
+ 24   
+
     25 -def streamer(stream, chunk_size = DEFAULT_CHUNK_SIZE, bytes = None): 
+
     26      offset = 0 
+ 27      while bytes == None or offset < bytes: 
+ 28          if bytes != None and bytes - offset < chunk_size: 
+ 29              chunk_size = bytes - offset 
+ 30          data = stream.read(chunk_size) 
+ 31          length = len(data) 
+ 32          if not length: 
+ 33              break 
+ 34          else: 
+ 35              yield data 
+ 36          if length < chunk_size: 
+ 37              break 
+ 38          offset += length 
+ 39      stream.close() 
+
     40   
+
     41 -def stream_file_or_304_or_206( 
+ 42      static_file, 
+ 43      chunk_size = DEFAULT_CHUNK_SIZE, 
+ 44      request = None, 
+ 45      headers = {}, 
+ 46      error_message = None, 
+ 47      ): 
+
     48      if error_message is None: 
+ 49          error_message = rewrite.thread.routes.error_message % 'invalid request' 
+ 50      try: 
+ 51          fp = open(static_file) 
+ 52      except IOError, e: 
+ 53          if e[0] == errno.EISDIR: 
+ 54              raise HTTP(403, error_message, web2py_error='file is a directory') 
+ 55          elif e[0] == errno.EACCES: 
+ 56              raise HTTP(403, error_message, web2py_error='inaccessible file') 
+ 57          else: 
+ 58              raise HTTP(404, error_message, web2py_error='invalid file') 
+ 59      else: 
+ 60          fp.close() 
+ 61      stat_file = os.stat(static_file) 
+ 62      fsize = stat_file[stat.ST_SIZE] 
+ 63      mtime = time.strftime('%a, %d %b %Y %H:%M:%S GMT', 
+ 64                            time.gmtime(stat_file[stat.ST_MTIME])) 
+ 65      headers['Content-Type'] = contenttype(static_file) 
+ 66      headers['Last-Modified'] = mtime 
+ 67      headers['Pragma'] = 'cache' 
+ 68      headers['Cache-Control'] = 'private' 
+ 69   
+ 70      if request and request.env.http_if_modified_since == mtime: 
+ 71          raise HTTP(304, **{'Content-Type': headers['Content-Type']}) 
+ 72   
+ 73      elif request and request.env.http_range: 
+ 74          start_items = regex_start_range.findall(request.env.http_range) 
+ 75          if not start_items: 
+ 76              start_items = [0] 
+ 77          stop_items = regex_stop_range.findall(request.env.http_range) 
+ 78          if not stop_items or int(stop_items[0]) > fsize - 1: 
+ 79              stop_items = [fsize - 1] 
+ 80          part = (int(start_items[0]), int(stop_items[0]), fsize) 
+ 81          bytes = part[1] - part[0] + 1 
+ 82          try: 
+ 83              stream = open(static_file, 'rb') 
+ 84          except IOError, e: 
+ 85              if e[0] in (errno.EISDIR, errno.EACCES): 
+ 86                  raise HTTP(403) 
+ 87              else: 
+ 88                  raise HTTP(404) 
+ 89          stream.seek(part[0]) 
+ 90          headers['Content-Range'] = 'bytes %i-%i/%i' % part 
+ 91          headers['Content-Length'] = '%i' % bytes 
+ 92          status = 206 
+ 93      else: 
+ 94          try: 
+ 95              stream = open(static_file, 'rb') 
+ 96          except IOError, e: 
+ 97              if e[0] in (errno.EISDIR, errno.EACCES): 
+ 98                  raise HTTP(403) 
+ 99              else: 
+100                  raise HTTP(404) 
+101          headers['Content-Length'] = fsize 
+102          bytes = None 
+103          status = 200 
+104      if request and request.env.web2py_use_wsgi_file_wrapper: 
+105          wrapped = request.env.wsgi_file_wrapper(stream, chunk_size) 
+106      else: 
+107          wrapped = streamer(stream, chunk_size=chunk_size, bytes=bytes) 
+108      raise HTTP(status, wrapped, **headers) 
+
    109   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.template-module.html
Index: applications/examples/static/epydoc/web2py.gluon.template-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.template-module.html
@@ -0,0 +1,304 @@
+
+
+
+
+  web2py.gluon.template
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module template
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module template
    source code

    
+
    +
+This file is part of the web2py Web Framework (Copyrighted, 2007-2011).
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+Author: Thadeus Burgess
+
+Contributors:
+
+- Thank you to Massimo Di Pierro for creating the original gluon/template.py
+- Thank you to Jonathan Lundell for extensively testing the regex on Jython.
+- Thank you to Limodou (creater of uliweb) who inspired the block-element support for web2py.
+
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        Node
    
+      Basic Container Object
+    
    
+       
+    
+        SuperNode
+    
    
+       
+    
+        BlockNode
    
+      Block Container.
+    
    
+       
+    
+        Content
    
+      Parent Container -- Used as the root level BlockNode.
+    
    
+       
+    
+        TemplateParser
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    parse_template(filename,
+        path='views/',
+        context={},
+        lexers={},
+        delimiters=('{{', '}}'))
    
+      filename can be a view filename in the views folder or an input 
+      stream path is the path of a views folder context is a dictionary of 
+      symbols used to render the template    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    get_parsed(text)
    
+      Returns the indented python code of text.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    render(content='hello world',
+        stream=1,
+        filename=1,
+        path=1,
+        context={},
+        lexers={},
+        delimiters=('{{', '}}'))
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Function Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    get_parsed(text)
+  
    
+      		source code 
+    
    
+  
+  Returns the indented python code of text. Useful for unit testing.
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.template-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.template-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.template-pysrc.html
@@ -0,0 +1,1234 @@
+
+
+
+
+  web2py.gluon.template
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module template
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.template
    
+
    +  1  #!/usr/bin/env python 
+  2  # -*- coding: utf-8 -*- 
+  3   
+  4  """ 
+  5  This file is part of the web2py Web Framework (Copyrighted, 2007-2011). 
+  6  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+  7   
+  8  Author: Thadeus Burgess 
+  9   
+ 10  Contributors: 
+ 11   
+ 12  - Thank you to Massimo Di Pierro for creating the original gluon/template.py 
+ 13  - Thank you to Jonathan Lundell for extensively testing the regex on Jython. 
+ 14  - Thank you to Limodou (creater of uliweb) who inspired the block-element support for web2py. 
+ 15  """ 
+ 16   
+ 17  import os 
+ 18  import re 
+ 19  import cgi 
+ 20  import cStringIO 
+ 21  import logging 
+ 22  try: 
+ 23      from restricted import RestrictedError 
+ 24  except: 
+
     25 -    def RestrictedError(a,b,c): 
+
     26          logging.error(str(a)+':'+str(b)+':'+str(c)) 
+ 27          return RuntimeError 
+
     28   
+
     29 -class Node(object): 
+
     30      """ 
+ 31      Basic Container Object 
+ 32      """ 
+
     33 -    def __init__(self, value = None, pre_extend = False): 
+
     34          self.value = value 
+ 35          self.pre_extend = pre_extend 
+
     36   
+
     37 -    def __str__(self): 
+
     38          return str(self.value) 
+
     39   
+
     40 -class SuperNode(Node): 
+
     41 -    def __init__(self, name = '', pre_extend = False): 
+
     42          self.name = name 
+ 43          self.value = None 
+ 44          self.pre_extend = pre_extend 
+
     45   
+
     46 -    def __str__(self): 
+
     47          if self.value: 
+ 48              return str(self.value) 
+ 49          else: 
+ 50              raise SyntaxError("Undefined parent block ``%s``. \n" % self.name + \ 
+ 51  "You must define a block before referencing it.\nMake sure you have not left out an ``{{end}}`` tag." ) 
+
     52   
+
     53 -    def __repr__(self): 
+
     54          return "%s->%s" % (self.name, self.value) 
+
     55   
+
     56 -class BlockNode(Node): 
+
     57      """ 
+ 58      Block Container. 
+ 59   
+ 60      This Node can contain other Nodes and will render in a hierarchical order 
+ 61      of when nodes were added. 
+ 62   
+ 63      ie:: 
+ 64   
+ 65          {{ block test }} 
+ 66              This is default block test 
+ 67          {{ end }} 
+ 68      """ 
+
     69 -    def __init__(self, name = '', pre_extend = False, delimiters = ('{{','}}')): 
+
     70          """ 
+ 71          name - Name of this Node. 
+ 72          """ 
+ 73          self.nodes = [] 
+ 74          self.name = name 
+ 75          self.pre_extend = pre_extend 
+ 76          self.left, self.right = delimiters 
+
     77   
+
     78 -    def __repr__(self): 
+
     79          lines = ['%sblock %s%s' % (self.left,self.name,self.right)] 
+ 80          for node in self.nodes: 
+ 81              lines.append(str(node)) 
+ 82          lines.append('%send%s' % (self.left, self.right)) 
+ 83          return ''.join(lines) 
+
     84   
+
     85 -    def __str__(self): 
+
     86          """ 
+ 87          Get this BlockNodes content, not including child Nodes 
+ 88          """ 
+ 89          lines = [] 
+ 90          for node in self.nodes: 
+ 91              if not isinstance(node, BlockNode): 
+ 92                  lines.append(str(node)) 
+ 93          return ''.join(lines) 
+
     94   
+
     95 -    def append(self, node): 
+
     96          """ 
+ 97          Add an element to the nodes. 
+ 98   
+ 99          Keyword Arguments 
+100   
+101          - node -- Node object or string to append. 
+102          """ 
+103          if isinstance(node, str) or isinstance(node, Node): 
+104              self.nodes.append(node) 
+105          else: 
+106              raise TypeError("Invalid type; must be instance of ``str`` or ``BlockNode``. %s" % node) 
+
    107   
+
    108 -    def extend(self, other): 
+
    109          """ 
+110          Extend the list of nodes with another BlockNode class. 
+111   
+112          Keyword Arguments 
+113   
+114          - other -- BlockNode or Content object to extend from. 
+115          """ 
+116          if isinstance(other, BlockNode): 
+117              self.nodes.extend(other.nodes) 
+118          else: 
+119              raise TypeError("Invalid type; must be instance of ``BlockNode``. %s" % other) 
+
    120   
+
    121 -    def output(self, blocks): 
+
    122          """ 
+123          Merges all nodes into a single string. 
+124   
+125          blocks -- Dictionary of blocks that are extending 
+126          from this template. 
+127          """ 
+128          lines = [] 
+129          # Get each of our nodes 
+130          for node in self.nodes: 
+131              # If we have a block level node. 
+132              if isinstance(node, BlockNode): 
+133                  # If we can override this block. 
+134                  if node.name in blocks: 
+135                      # Override block from vars. 
+136                      lines.append(blocks[node.name].output(blocks)) 
+137                  # Else we take the default 
+138                  else: 
+139                      lines.append(node.output(blocks)) 
+140              # Else its just a string 
+141              else: 
+142                  lines.append(str(node)) 
+143          # Now combine all of our lines together. 
+144          return ''.join(lines) 
+
    145   
+
    146 -class Content(BlockNode): 
+
    147      """ 
+148      Parent Container -- Used as the root level BlockNode. 
+149   
+150      Contains functions that operate as such. 
+151      """ 
+
    152 -    def __init__(self, name = "ContentBlock", pre_extend = False): 
+
    153          """ 
+154          Keyword Arguments 
+155   
+156          name -- Unique name for this BlockNode 
+157          """ 
+158          self.name = name 
+159          self.nodes = [] 
+160          self.blocks = {} 
+161          self.pre_extend = pre_extend 
+
    162   
+
    163 -    def __str__(self): 
+
    164          lines = [] 
+165          # For each of our nodes 
+166          for node in self.nodes: 
+167              # If it is a block node. 
+168              if isinstance(node, BlockNode): 
+169                  # And the node has a name that corresponds with a block in us 
+170                  if node.name in self.blocks: 
+171                      # Use the overriding output. 
+172                      lines.append(self.blocks[node.name].output(self.blocks)) 
+173                  else: 
+174                      # Otherwise we just use the nodes output. 
+175                      lines.append(node.output(self.blocks)) 
+176              else: 
+177                  # It is just a string, so include it. 
+178                  lines.append(str(node)) 
+179          # Merge our list together. 
+180          return ''.join(lines) 
+
    181   
+
    182 -    def _insert(self, other, index = 0): 
+
    183          """ 
+184          Inserts object at index. 
+185          """ 
+186          if isinstance(other, str) or isinstance(other, Node): 
+187              self.nodes.insert(index, other) 
+188          else: 
+189              raise TypeError("Invalid type, must be instance of ``str`` or ``Node``.") 
+
    190   
+
    191 -    def insert(self, other, index = 0): 
+
    192          """ 
+193          Inserts object at index. 
+194   
+195          You may pass a list of objects and have them inserted. 
+196          """ 
+197          if isinstance(other, (list, tuple)): 
+198              # Must reverse so the order stays the same. 
+199              other.reverse() 
+200              for item in other: 
+201                  self._insert(item, index) 
+202          else: 
+203              self._insert(other, index) 
+
    204   
+
    205 -    def append(self, node): 
+
    206          """ 
+207          Adds a node to list. If it is a BlockNode then we assign a block for it. 
+208          """ 
+209          if isinstance(node, str) or isinstance(node, Node): 
+210              self.nodes.append(node) 
+211              if isinstance(node, BlockNode): 
+212                  self.blocks[node.name] = node 
+213          else: 
+214              raise TypeError("Invalid type, must be instance of ``str`` or ``BlockNode``. %s" % node) 
+
    215   
+
    216 -    def extend(self, other): 
+
    217          """ 
+218          Extends the objects list of nodes with another objects nodes 
+219          """ 
+220          if isinstance(other, BlockNode): 
+221              self.nodes.extend(other.nodes) 
+222              self.blocks.update(other.blocks) 
+223          else: 
+224              raise TypeError("Invalid type; must be instance of ``BlockNode``. %s" % other) 
+
    225   
+
    226 -    def clear_content(self): 
+
    227          self.nodes = [] 
+
    228   
+
    229 -class TemplateParser(object): 
+
    230   
+231      r_tag = re.compile(r'(\{\{.*?\}\})', re.DOTALL) 
+232   
+233      r_multiline = re.compile(r'(""".*?""")|(\'\'\'.*?\'\'\')', re.DOTALL) 
+234   
+235      # These are used for re-indentation. 
+236      # Indent + 1 
+237      re_block = re.compile('^(elif |else:|except:|except |finally:).*$', 
+238                        re.DOTALL) 
+239      # Indent - 1 
+240      re_unblock = re.compile('^(return|continue|break|raise)( .*)?$', re.DOTALL) 
+241      # Indent - 1 
+242      re_pass = re.compile('^pass( .*)?$', re.DOTALL) 
+243   
+
    244 -    def __init__(self, text, 
+245                   name    = "ParserContainer", 
+246                   context = dict(), 
+247                   path    = 'views/', 
+248                   writer  = 'response.write', 
+249                   lexers  = {}, 
+250                   delimiters = ('{{','}}'), 
+251                   _super_nodes = [], 
+252                   ): 
+
    253          """ 
+254          text -- text to parse 
+255          context -- context to parse in 
+256          path -- folder path to templates 
+257          writer -- string of writer class to use 
+258          lexers -- dict of custom lexers to use. 
+259          delimiters -- for example ('{{','}}') 
+260          _super_nodes -- a list of nodes to check for inclusion 
+261                          this should only be set by "self.extend" 
+262                          It contains a list of SuperNodes from a child 
+263                          template that need to be handled. 
+264          """ 
+265   
+266          # Keep a root level name. 
+267          self.name = name 
+268          # Raw text to start parsing. 
+269          self.text = text 
+270          # Writer to use (refer to the default for an example). 
+271          # This will end up as 
+272          # "%s(%s, escape=False)" % (self.writer, value) 
+273          self.writer = writer 
+274   
+275          # Dictionary of custom name lexers to use. 
+276          if isinstance(lexers, dict): 
+277              self.lexers = lexers 
+278          else: 
+279              self.lexers = {} 
+280   
+281          # Path of templates 
+282          self.path = path 
+283          # Context for templates. 
+284          self.context = context 
+285   
+286          # allow optional alternative delimiters 
+287          self.delimiters = delimiters 
+288          if delimiters!=('{{','}}'): 
+289              escaped_delimiters = (re.escape(delimiters[0]),re.escape(delimiters[1])) 
+290              self.r_tag = re.compile(r'(%s.*?%s)' % escaped_delimiters, re.DOTALL) 
+291   
+292   
+293          # Create a root level Content that everything will go into. 
+294          self.content = Content(name=name) 
+295   
+296          # Stack will hold our current stack of nodes. 
+297          # As we descend into a node, it will be added to the stack 
+298          # And when we leave, it will be removed from the stack. 
+299          # self.content should stay on the stack at all times. 
+300          self.stack = [self.content] 
+301   
+302          # This variable will hold a reference to every super block 
+303          # that we come across in this template. 
+304          self.super_nodes = [] 
+305   
+306          # This variable will hold a reference to the child 
+307          # super nodes that need handling. 
+308          self.child_super_nodes = _super_nodes 
+309   
+310          # This variable will hold a reference to every block 
+311          # that we come across in this template 
+312          self.blocks = {} 
+313   
+314          # Begin parsing. 
+315          self.parse(text) 
+
    316   
+
    317 -    def to_string(self): 
+
    318          """ 
+319          Return the parsed template with correct indentation. 
+320   
+321          Used to make it easier to port to python3. 
+322          """ 
+323          return self.reindent(str(self.content)) 
+
    324   
+
    325 -    def __str__(self): 
+
    326          "Make sure str works exactly the same as python 3" 
+327          return self.to_string() 
+
    328   
+
    329 -    def __unicode__(self): 
+
    330          "Make sure str works exactly the same as python 3" 
+331          return self.to_string() 
+
    332   
+
    333 -    def reindent(self, text): 
+
    334          """ 
+335          Reindents a string of unindented python code. 
+336          """ 
+337   
+338          # Get each of our lines into an array. 
+339          lines = text.split('\n') 
+340   
+341          # Our new lines 
+342          new_lines = [] 
+343   
+344          # Keeps track of how many indents we have. 
+345          # Used for when we need to drop a level of indentation 
+346          # only to reindent on the next line. 
+347          credit = 0 
+348   
+349          # Current indentation 
+350          k = 0 
+351   
+352          ################# 
+353          # THINGS TO KNOW 
+354          ################# 
+355   
+356          # k += 1 means indent 
+357          # k -= 1 means unindent 
+358          # credit = 1 means unindent on the next line. 
+359   
+360          for raw_line in lines: 
+361              line = raw_line.strip() 
+362   
+363              # ignore empty lines 
+364              if not line: 
+365                  continue 
+366   
+367              # If we have a line that contains python code that 
+368              # should be unindented for this line of code. 
+369              # and then reindented for the next line. 
+370              if TemplateParser.re_block.match(line): 
+371                  k = k + credit - 1 
+372   
+373              # We obviously can't have a negative indentation 
+374              k = max(k,0) 
+375   
+376              # Add the indentation! 
+377              new_lines.append(' '*(4*k)+line) 
+378   
+379              # Bank account back to 0 again :( 
+380              credit = 0 
+381   
+382              # If we are a pass block, we obviously de-dent. 
+383              if TemplateParser.re_pass.match(line): 
+384                  k -= 1 
+385   
+386              # If we are any of the following, de-dent. 
+387              # However, we should stay on the same level 
+388              # But the line right after us will be de-dented. 
+389              # So we add one credit to keep us at the level 
+390              # while moving back one indentation level. 
+391              if TemplateParser.re_unblock.match(line): 
+392                  credit = 1 
+393                  k -= 1 
+394   
+395              # If we are an if statement, a try, or a semi-colon we 
+396              # probably need to indent the next line. 
+397              if line.endswith(':') and not line.startswith('#'): 
+398                  k += 1 
+399   
+400          # This must come before so that we can raise an error with the 
+401          # right content. 
+402          new_text = '\n'.join(new_lines) 
+403   
+404          if k > 0: 
+405              self._raise_error('missing "pass" in view', new_text) 
+406          elif k < 0: 
+407              self._raise_error('too many "pass" in view', new_text) 
+408   
+409          return new_text 
+
    410   
+
    411 -    def _raise_error(self, message='', text=None): 
+
    412          """ 
+413          Raise an error using itself as the filename and textual content. 
+414          """ 
+415          raise RestrictedError(self.name, text or self.text, message) 
+
    416   
+
    417 -    def _get_file_text(self, filename): 
+
    418          """ 
+419          Attempt to open ``filename`` and retrieve its text. 
+420   
+421          This will use self.path to search for the file. 
+422          """ 
+423   
+424          # If they didn't specify a filename, how can we find one! 
+425          if not filename.strip(): 
+426              self._raise_error('Invalid template filename') 
+427   
+428          # Get the filename; filename looks like ``"template.html"``. 
+429          # We need to eval to remove the quotes and get the string type. 
+430          filename = eval(filename, self.context) 
+431   
+432          # Get the path of the file on the system. 
+433          filepath = os.path.join(self.path, filename) 
+434   
+435          # try to read the text. 
+436          try: 
+437              fileobj = open(filepath, 'rb') 
+438              text = fileobj.read() 
+439              fileobj.close() 
+440          except IOError: 
+441              self._raise_error('Unable to open included view file: ' + filepath) 
+442   
+443          return text 
+
    444   
+
    445 -    def include(self, content, filename): 
+
    446          """ 
+447          Include ``filename`` here. 
+448          """ 
+449          text = self._get_file_text(filename) 
+450   
+451          t = TemplateParser(text, 
+452                             name    = filename, 
+453                             context = self.context, 
+454                             path    = self.path, 
+455                             writer  = self.writer, 
+456                             delimiters = self.delimiters) 
+457   
+458          content.append(t.content) 
+
    459   
+
    460 -    def extend(self, filename): 
+
    461          """ 
+462          Extend ``filename``. Anything not declared in a block defined by the 
+463          parent will be placed in the parent templates ``{{include}}`` block. 
+464          """ 
+465          text = self._get_file_text(filename) 
+466   
+467          # Create out nodes list to send to the parent 
+468          super_nodes = [] 
+469          # We want to include any non-handled nodes. 
+470          super_nodes.extend(self.child_super_nodes) 
+471          # And our nodes as well. 
+472          super_nodes.extend(self.super_nodes) 
+473   
+474          t = TemplateParser(text, 
+475                      name         = filename, 
+476                      context      = self.context, 
+477                      path         = self.path, 
+478                      writer       = self.writer, 
+479                      delimiters   = self.delimiters, 
+480                      _super_nodes = super_nodes) 
+481   
+482          # Make a temporary buffer that is unique for parent 
+483          # template. 
+484          buf = BlockNode(name='__include__' + filename, delimiters=self.delimiters) 
+485          pre = [] 
+486   
+487          # Iterate through each of our nodes 
+488          for node in self.content.nodes: 
+489              # If a node is a block 
+490              if isinstance(node, BlockNode): 
+491                  # That happens to be in the parent template 
+492                  if node.name in t.content.blocks: 
+493                      # Do not include it 
+494                      continue 
+495   
+496              if isinstance(node, Node): 
+497                  # Or if the node was before the extension 
+498                  # we should not include it 
+499                  if node.pre_extend: 
+500                      pre.append(node) 
+501                      continue 
+502   
+503              # Otherwise, it should go int the 
+504              # Parent templates {{include}} section. 
+505                  buf.append(node) 
+506              else: 
+507                  buf.append(node) 
+508   
+509          # Clear our current nodes. We will be replacing this with 
+510          # the parent nodes. 
+511          self.content.nodes = [] 
+512   
+513          # Set our include, unique by filename 
+514          t.content.blocks['__include__' + filename] = buf 
+515   
+516          # Make sure our pre_extended nodes go first 
+517          t.content.insert(pre) 
+518   
+519          # Then we extend our blocks 
+520          t.content.extend(self.content) 
+521   
+522          # Work off the parent node. 
+523          self.content = t.content 
+
    524   
+
    525 -    def parse(self, text): 
+
    526   
+527          # Basically, r_tag.split will split the text into 
+528          # an array containing, 'non-tag', 'tag', 'non-tag', 'tag' 
+529          # so if we alternate this variable, we know 
+530          # what to look for. This is alternate to 
+531          # line.startswith("{{") 
+532          in_tag = False 
+533          extend = None 
+534          pre_extend = True 
+535   
+536          # Use a list to store everything in 
+537          # This is because later the code will "look ahead" 
+538          # for missing strings or brackets. 
+539          ij = self.r_tag.split(text) 
+540          # j = current index 
+541          # i = current item 
+542          for j in range(len(ij)): 
+543              i = ij[j] 
+544   
+545              if i: 
+546                  if len(self.stack) == 0: 
+547                      self._raise_error('The "end" tag is unmatched, please check if you have a starting "block" tag') 
+548   
+549                  # Our current element in the stack. 
+550                  top = self.stack[-1] 
+551   
+552                  if in_tag: 
+553                      line = i 
+554   
+555                      # If we are missing any strings!!!! 
+556                      # This usually happens with the following example 
+557                      # template code 
+558                      # 
+559                      # {{a = '}}'}} 
+560                      # or 
+561                      # {{a = '}}blahblah{{'}} 
+562                      # 
+563                      # This will fix these 
+564                      # This is commented out because the current template 
+565                      # system has this same limitation. Since this has a 
+566                      # performance hit on larger templates, I do not recommend 
+567                      # using this code on production systems. This is still here 
+568                      # for "i told you it *can* be fixed" purposes. 
+569                      # 
+570                      # 
+571  #                    if line.count("'") % 2 != 0 or line.count('"') % 2 != 0: 
+572  # 
+573  #                        # Look ahead 
+574  #                        la = 1 
+575  #                        nextline = ij[j+la] 
+576  # 
+577  #                        # As long as we have not found our ending 
+578  #                        # brackets keep going 
+579  #                        while '}}' not in nextline: 
+580  #                            la += 1 
+581  #                            nextline += ij[j+la] 
+582  #                            # clear this line, so we 
+583  #                            # don't attempt to parse it 
+584  #                            # this is why there is an "if i" 
+585  #                            # around line 530 
+586  #                            ij[j+la] = '' 
+587  # 
+588  #                        # retrieve our index. 
+589  #                        index = nextline.index('}}') 
+590  # 
+591  #                        # Everything before the new brackets 
+592  #                        before = nextline[:index+2] 
+593  # 
+594  #                        # Everything after 
+595  #                        after = nextline[index+2:] 
+596  # 
+597  #                        # Make the next line everything after 
+598  #                        # so it parses correctly, this *should* be 
+599  #                        # all html 
+600  #                        ij[j+1] = after 
+601  # 
+602  #                        # Add everything before to the current line 
+603  #                        line += before 
+604   
+605                      # Get rid of '{{' and '}}' 
+606                      line = line[2:-2].strip() 
+607   
+608                      # This is bad juju, but let's do it anyway 
+609                      if not line: 
+610                          continue 
+611   
+612                      # We do not want to replace the newlines in code, 
+613                      # only in block comments. 
+614                      def remove_newline(re_val): 
+615                          # Take the entire match and replace newlines with 
+616                          # escaped newlines. 
+617                          return re_val.group(0).replace('\n', '\\n') 
+
    618   
+619                      # Perform block comment escaping. 
+620                      # This performs escaping ON anything 
+621                      # in between """ and """ 
+622                      line = re.sub(TemplateParser.r_multiline, 
+623                                  remove_newline, 
+624                                  line) 
+625   
+626                      if line.startswith('='): 
+627                          # IE: {{=response.title}} 
+628                          name, value = '=', line[1:].strip() 
+629                      else: 
+630                          v = line.split(' ', 1) 
+631                          if len(v) == 1: 
+632                              # Example 
+633                              # {{ include }} 
+634                              # {{ end }} 
+635                              name = v[0] 
+636                              value = '' 
+637                          else: 
+638                              # Example 
+639                              # {{ block pie }} 
+640                              # {{ include "layout.html" }} 
+641                              # {{ for i in range(10): }} 
+642                              name = v[0] 
+643                              value = v[1] 
+644   
+645                      # This will replace newlines in block comments 
+646                      # with the newline character. This is so that they 
+647                      # retain their formatting, but squish down to one 
+648                      # line in the rendered template. 
+649   
+650                      # First check if we have any custom lexers 
+651                      if name in self.lexers: 
+652                          # Pass the information to the lexer 
+653                          # and allow it to inject in the environment 
+654   
+655                          # You can define custom names such as 
+656                          # '{{<<variable}}' which could potentially 
+657                          # write unescaped version of the variable. 
+658                          self.lexers[name](parser    = self, 
+659                                            value     = value, 
+660                                            top       = top, 
+661                                            stack     = self.stack,) 
+662   
+663                      elif name == '=': 
+664                          # So we have a variable to insert into 
+665                          # the template 
+666                          buf = "\n%s(%s)" % (self.writer, value) 
+667                          top.append(Node(buf, pre_extend = pre_extend)) 
+668   
+669                      elif name == 'block' and not value.startswith('='): 
+670                          # Make a new node with name. 
+671                          node = BlockNode(name = value.strip(), 
+672                                           pre_extend = pre_extend, 
+673                                           delimiters = self.delimiters) 
+674   
+675                          # Append this node to our active node 
+676                          top.append(node) 
+677   
+678                          # Make sure to add the node to the stack. 
+679                          # so anything after this gets added 
+680                          # to this node. This allows us to 
+681                          # "nest" nodes. 
+682                          self.stack.append(node) 
+683   
+684                      elif name == 'end' and not value.startswith('='): 
+685                          # We are done with this node. 
+686   
+687                          # Save an instance of it 
+688                          self.blocks[top.name] = top 
+689   
+690                          # Pop it. 
+691                          self.stack.pop() 
+692   
+693                      elif name == 'super' and not value.startswith('='): 
+694                          # Get our correct target name 
+695                          # If they just called {{super}} without a name 
+696                          # attempt to assume the top blocks name. 
+697                          if value: 
+698                              target_node = value 
+699                          else: 
+700                              target_node = top.name 
+701   
+702                          # Create a SuperNode instance 
+703                          node = SuperNode(name = target_node, 
+704                                              pre_extend = pre_extend) 
+705   
+706                          # Add this to our list to be taken care of 
+707                          self.super_nodes.append(node) 
+708   
+709                          # And put in in the tree 
+710                          top.append(node) 
+711   
+712                      elif name == 'include' and not value.startswith('='): 
+713                          # If we know the target file to include 
+714                          if value: 
+715                              self.include(top, value) 
+716   
+717                          # Otherwise, make a temporary include node 
+718                          # That the child node will know to hook into. 
+719                          else: 
+720                              include_node = BlockNode(name = '__include__' + self.name, 
+721                                                       pre_extend = pre_extend, 
+722                                                       delimiters = self.delimiters) 
+723                              top.append(include_node) 
+724   
+725                      elif name == 'extend' and not value.startswith('='): 
+726                          # We need to extend the following 
+727                          # template. 
+728                          extend = value 
+729                          pre_extend = False 
+730   
+731                      else: 
+732                          # If we don't know where it belongs 
+733                          # we just add it anyways without formatting. 
+734                          if line and in_tag: 
+735   
+736                              # Split on the newlines >.< 
+737                              tokens = line.split('\n') 
+738   
+739                              # We need to look for any instances of 
+740                              # for i in range(10): 
+741                              #   = i 
+742                              # pass 
+743                              # So we can properly put a response.write() in place. 
+744                              continuation = False 
+745                              len_parsed = 0 
+746                              for k in range(len(tokens)): 
+747   
+748                                  tokens[k] = tokens[k].strip() 
+749                                  len_parsed += len(tokens[k]) 
+750   
+751                                  if tokens[k].startswith('='): 
+752                                      if tokens[k].endswith('\\'): 
+753                                          continuation = True 
+754                                          tokens[k] = "\n%s(%s" % (self.writer, tokens[k][1:].strip()) 
+755                                      else: 
+756                                          tokens[k] = "\n%s(%s)" % (self.writer, tokens[k][1:].strip()) 
+757                                  elif continuation: 
+758                                      tokens[k] += ')' 
+759                                      continuation = False 
+760   
+761   
+762                              buf = "\n%s" % '\n'.join(tokens) 
+763                              top.append(Node(buf, pre_extend = pre_extend)) 
+764   
+765                  else: 
+766                      # It is HTML so just include it. 
+767                      buf = "\n%s(%r, escape=False)" % (self.writer, i) 
+768                      top.append(Node(buf, pre_extend = pre_extend)) 
+769   
+770              # Remember: tag, not tag, tag, not tag 
+771              in_tag = not in_tag 
+772   
+773          # Make a list of items to remove from child 
+774          to_rm = [] 
+775   
+776          # Go through each of the children nodes 
+777          for node in self.child_super_nodes: 
+778              # If we declared a block that this node wants to include 
+779              if node.name in self.blocks: 
+780                  # Go ahead and include it! 
+781                  node.value = self.blocks[node.name] 
+782                  # Since we processed this child, we don't need to 
+783                  # pass it along to the parent 
+784                  to_rm.append(node) 
+785   
+786          # Remove some of the processed nodes 
+787          for node in to_rm: 
+788              # Since this is a pointer, it works beautifully. 
+789              # Sometimes I miss C-Style pointers... I want my asterisk... 
+790              self.child_super_nodes.remove(node) 
+791   
+792          # If we need to extend a template. 
+793          if extend: 
+794              self.extend(extend) 
+
    795   
+796  # We need this for integration with gluon 
+
    797 -def parse_template(filename, 
+798                     path    = 'views/', 
+799                     context = dict(), 
+800                     lexers  = {}, 
+801                     delimiters = ('{{','}}') 
+802                     ): 
+
    803      """ 
+804      filename can be a view filename in the views folder or an input stream 
+805      path is the path of a views folder 
+806      context is a dictionary of symbols used to render the template 
+807      """ 
+808   
+809      # First, if we have a str try to open the file 
+810      if isinstance(filename, str): 
+811          try: 
+812              fp = open(os.path.join(path, filename), 'rb') 
+813              text = fp.read() 
+814              fp.close() 
+815          except IOError: 
+816              raise RestrictedError(filename, '', 'Unable to find the file') 
+817      else: 
+818          text = filename.read() 
+819   
+820      # Use the file contents to get a parsed template and return it. 
+821      return str(TemplateParser(text, context=context, path=path, lexers=lexers, delimiters=delimiters)) 
+
    822   
+
    823 -def get_parsed(text): 
+
    824      """ 
+825      Returns the indented python code of text. Useful for unit testing. 
+826   
+827      """ 
+828      return str(TemplateParser(text)) 
+
    829   
+830  # And this is a generic render function. 
+831  # Here for integration with gluon. 
+
    832 -def render(content = "hello world", 
+833             stream = None, 
+834             filename = None, 
+835             path = None, 
+836             context = {}, 
+837             lexers  = {}, 
+838             delimiters = ('{{','}}') 
+839             ): 
+
    840      """ 
+841      >>> render() 
+842      'hello world' 
+843      >>> render(content='abc') 
+844      'abc' 
+845      >>> render(content='abc\\'') 
+846      "abc'" 
+847      >>> render(content='a"\\'bc') 
+848      'a"\\'bc' 
+849      >>> render(content='a\\nbc') 
+850      'a\\nbc' 
+851      >>> render(content='a"bcd"e') 
+852      'a"bcd"e' 
+853      >>> render(content="'''a\\nc'''") 
+854      "'''a\\nc'''" 
+855      >>> render(content="'''a\\'c'''") 
+856      "'''a\'c'''" 
+857      >>> render(content='{{for i in range(a):}}{{=i}}<br />{{pass}}', context=dict(a=5)) 
+858      '0<br />1<br />2<br />3<br />4<br />' 
+859      >>> render(content='{%for i in range(a):%}{%=i%}<br />{%pass%}', context=dict(a=5),delimiters=('{%','%}')) 
+860      '0<br />1<br />2<br />3<br />4<br />' 
+861      >>> render(content="{{='''hello\\nworld'''}}") 
+862      'hello\\nworld' 
+863      >>> render(content='{{for i in range(3):\\n=i\\npass}}') 
+864      '012' 
+865      """ 
+866      # Here to avoid circular Imports 
+867      try: 
+868          from globals import Response 
+869      except: 
+870          # Working standalone. Build a mock Response object. 
+871          class Response(): 
+872              def __init__(self): 
+873                  self.body = cStringIO.StringIO() 
+
    874              def write(self, data, escape=True): 
+875                  if not escape: 
+876                      self.body.write(str(data)) 
+877                  elif hasattr(data,'xml') and callable(data.xml): 
+878                      self.body.write(data.xml()) 
+879                  else: 
+880                      # make it a string 
+881                      if not isinstance(data, (str, unicode)): 
+882                          data = str(data) 
+883                      elif isinstance(data, unicode): 
+884                          data = data.encode('utf8', 'xmlcharrefreplace') 
+885                      data = cgi.escape(data, True).replace("'","&#x27;") 
+886                      self.body.write(data) 
+887   
+888          # A little helper to avoid escaping. 
+889          class NOESCAPE(): 
+890              def __init__(self, text): 
+891                  self.text = text 
+892              def xml(self): 
+893                  return self.text 
+894          # Add it to the context so we can use it. 
+895          context['NOESCAPE'] = NOESCAPE 
+896   
+897      # If we don't have anything to render, why bother? 
+898      if not content and not stream and not filename: 
+899          raise SyntaxError, "Must specify a stream or filename or content" 
+900   
+901      # Here for legacy purposes, probably can be reduced to something more simple. 
+902      close_stream = False 
+903      if not stream: 
+904          if filename: 
+905              stream = open(filename, 'rb') 
+906              close_stream = True 
+907          elif content: 
+908              stream = cStringIO.StringIO(content) 
+909   
+910      # Get a response class. 
+911      context['response'] = Response() 
+912   
+913      # Execute the template. 
+914      code = str(TemplateParser(stream.read(), context=context, path=path, lexers=lexers, delimiters=delimiters)) 
+915      try: 
+916          exec(code) in context 
+917      except Exception: 
+918          # for i,line in enumerate(code.split('\n')): print i,line 
+919          raise 
+920   
+921      if close_stream: 
+922          stream.close() 
+923   
+924      # Returned the rendered content. 
+925      return context['response'].body.getvalue() 
+926   
+927   
+928  if __name__ == '__main__': 
+929      import doctest 
+930      doctest.testmod() 
+931   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:05 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.template.BlockNode-class.html
Index: applications/examples/static/epydoc/web2py.gluon.template.BlockNode-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.template.BlockNode-class.html
@@ -0,0 +1,474 @@
+
+
+
+
+  web2py.gluon.template.BlockNode
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module template ::
+        Class BlockNode
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class BlockNode
    source code

    
+
    +object --+    
+         |    
+      Node --+
+             |
+            BlockNode
+
    
+
+
    Known Subclasses:
    
+
    
+    Content
+
    
+
+
    
+
    Block Container.
    
+  
    This Node can contain other Nodes and will render in a hierarchical 
+  order of when nodes were added.
    
+  ie:
+
    +   {{ block test }}
+       This is default block test
+   {{ end }}
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        name='',
+        pre_extend=True,
+        delimiters=('{{', '}}'))
    
+      name - Name of this Node.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __repr__(self)
    
+      repr(x)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __str__(self)
    
+      Get this BlockNodes content, not including child Nodes    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    append(self,
+        node)
    
+      Add an element to the nodes.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    extend(self,
+        other)
    
+      Extend the list of nodes with another BlockNode class.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    output(self,
+        blocks)
    
+      Merges all nodes into a single string.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        name='',
+        pre_extend=True,
+        delimiters=('{{', '}}'))
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  name - Name of this Node.
+  
    
+    
    Overrides:
+      Node.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __repr__(self)
+    
    (Representation operator)
+  
    
+      		source code 
+    
    
+  
+  repr(x)
+  
    
+    
    Overrides:
+      object.__repr__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __str__(self)
+    
    (Informal representation operator)
+  
    
+      		source code 
+    
    
+  
+  Get this BlockNodes content, not including child Nodes
+  
    
+    
    Overrides:
+      Node.__str__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    append(self,
+        node)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Add an element to the nodes.
+
+Keyword Arguments
+
+- node -- Node object or string to append.
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    extend(self,
+        other)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Extend the list of nodes with another BlockNode class.
+
+Keyword Arguments
+
+- other -- BlockNode or Content object to extend from.
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    output(self,
+        blocks)
+  
    
+      		source code 
+    
    
+  
+  
    Merges all nodes into a single string.
    
+  blocks -- Dictionary of blocks that are extending from this 
+  template.
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.template.Content-class.html
Index: applications/examples/static/epydoc/web2py.gluon.template.Content-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.template.Content-class.html
@@ -0,0 +1,454 @@
+
+
+
+
+  web2py.gluon.template.Content
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module template ::
+        Class Content
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Content
    source code

    
+
    +object --+        
+         |        
+      Node --+    
+             |    
+     BlockNode --+
+                 |
+                Content
+
    
+
+
    
+
    Parent Container -- Used as the root level BlockNode.
    
+  Contains functions that operate as such.

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        name='ContentBlock',
+        pre_extend=True)
    
+      Keyword Arguments    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __str__(self)
    
+      Get this BlockNodes content, not including child Nodes    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _insert(self,
+        other,
+        index=0)
    
+      Inserts object at index.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    insert(self,
+        other,
+        index=0)
    
+      Inserts object at index.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    append(self,
+        node)
    
+      Adds a node to list.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    extend(self,
+        other)
    
+      Extends the objects list of nodes with another objects nodes    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    clear_content(self)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from BlockNode:
+      __repr__,
+      output
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        name='ContentBlock',
+        pre_extend=True)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
    Keyword Arguments
    
+  name -- Unique name for this BlockNode
+  
    
+    
    Overrides:
+      BlockNode.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __str__(self)
+    
    (Informal representation operator)
+  
    
+      		source code 
+    
    
+  
+  Get this BlockNodes content, not including child Nodes
+  
    
+    
    Overrides:
+      BlockNode.__str__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    insert(self,
+        other,
+        index=0)
+  
    
+      		source code 
+    
    
+  
+  
    Inserts object at index.
    
+  You may pass a list of objects and have them inserted.
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    append(self,
+        node)
+  
    
+      		source code 
+    
    
+  
+  Adds a node to list. If it is a BlockNode then we assign a block for 
+  it.
+  
    
+    
    Overrides:
+      BlockNode.append
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    extend(self,
+        other)
+  
    
+      		source code 
+    
    
+  
+  Extends the objects list of nodes with another objects nodes
+  
    
+    
    Overrides:
+      BlockNode.extend
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.template.Node-class.html
Index: applications/examples/static/epydoc/web2py.gluon.template.Node-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.template.Node-class.html
@@ -0,0 +1,295 @@
+
+
+
+
+  web2py.gluon.template.Node
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module template ::
+        Class Node
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Node
    source code

    
+
    +object --+
+         |
+        Node
+
    
+
+
    Known Subclasses:
    
+
    
+    BlockNode,
+    SuperNode
+
    
+
+
    
+Basic Container Object

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        value=1,
+        pre_extend=True)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __str__(self)
    
+      str(x)    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        value=1,
+        pre_extend=True)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __str__(self)
+    
    (Informal representation operator)
+  
    
+      		source code 
+    
    
+  
+  str(x)
+  
    
+    
    Overrides:
+      object.__str__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.template.SuperNode-class.html
Index: applications/examples/static/epydoc/web2py.gluon.template.SuperNode-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.template.SuperNode-class.html
@@ -0,0 +1,327 @@
+
+
+
+
+  web2py.gluon.template.SuperNode
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module template ::
+        Class SuperNode
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class SuperNode
    source code

    
+
    +object --+    
+         |    
+      Node --+
+             |
+            SuperNode
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        name='',
+        pre_extend=True)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __str__(self)
    
+      str(x)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __repr__(self)
    
+      repr(x)    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        name='',
+        pre_extend=True)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      Node.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __str__(self)
+    
    (Informal representation operator)
+  
    
+      		source code 
+    
    
+  
+  str(x)
+  
    
+    
    Overrides:
+      Node.__str__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __repr__(self)
+    
    (Representation operator)
+  
    
+      		source code 
+    
    
+  
+  repr(x)
+  
    
+    
    Overrides:
+      object.__repr__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.template.TemplateParser-class.html
Index: applications/examples/static/epydoc/web2py.gluon.template.TemplateParser-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.template.TemplateParser-class.html
@@ -0,0 +1,626 @@
+
+
+
+
+  web2py.gluon.template.TemplateParser
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module template ::
+        Class TemplateParser
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class TemplateParser
    source code

    
+
    +object --+
+         |
+        TemplateParser
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        text,
+        name='ParserContainer',
+        context={},
+        path='views/',
+        writer='response.write',
+        lexers={},
+        delimiters=('{{', '}}'),
+        _super_nodes=[])
    
+      text -- text to parse
+context -- context to parse in
+path -- folder path to templates
+writer -- string of writer class to use
+lexers -- dict of custom lexers to use.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    to_string(self)
    
+      Return the parsed template with correct indentation.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __str__(self)
    
+      Make sure str works exactly the same as python 3    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __unicode__(self)
    
+      Make sure str works exactly the same as python 3    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    reindent(self,
+        text)
    
+      Reindents a string of unindented python code.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _raise_error(self,
+        message='',
+        text=1)
    
+      Raise an error using itself as the filename and textual 
+      content.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _get_file_text(self,
+        filename)
    
+      Attempt to open ``filename`` and retrieve its text.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    include(self,
+        content,
+        filename)
    
+      Include ``filename`` here.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    extend(self,
+        filename)
    
+      Extend ``filename``.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    parse(self,
+        text)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        r_tag = re.compile(r'(?s)(\{\{.*?\}\})')
+    
    
+       
+    
+        r_multiline = re.compile(r'(?s)(""".*?""")|(\'\'\'.*?\'\'\')')
+    
    
+       
+    
+        re_block = re.compile(r'(?s)^(elif |else:|except:|except |fina...
+    
    
+       
+    
+        re_unblock = re.compile(r'(?s)^(return|continue|break|raise)( ...
+    
    
+       
+    
+        re_pass = re.compile(r'(?s)^pass( .*)?$')
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        text,
+        name='ParserContainer',
+        context={},
+        path='views/',
+        writer='response.write',
+        lexers={},
+        delimiters=('{{', '}}'),
+        _super_nodes=[])
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
    +
+text -- text to parse
+context -- context to parse in
+path -- folder path to templates
+writer -- string of writer class to use
+lexers -- dict of custom lexers to use.
+delimiters -- for example ('{{','}}')
+_super_nodes -- a list of nodes to check for inclusion
+                this should only be set by "self.extend"
+                It contains a list of SuperNodes from a child
+                template that need to be handled.
+
+
    
+  
    
+    
    Overrides:
+      object.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    to_string(self)
+  
    
+      		source code 
+    
    
+  
+  
    Return the parsed template with correct indentation.
    
+  Used to make it easier to port to python3.
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __str__(self)
+    
    (Informal representation operator)
+  
    
+      		source code 
+    
    
+  
+  Make sure str works exactly the same as python 3
+  
    
+    
    Overrides:
+      object.__str__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _get_file_text(self,
+        filename)
+  
    
+      		source code 
+    
    
+  
+  
    Attempt to open ``filename`` and retrieve its text.
    
+  This will use self.path to search for the file.
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    extend(self,
+        filename)
+  
    
+      		source code 
+    
    
+  
+  Extend ``filename``. Anything not declared in a block defined by the 
+  parent will be placed in the parent templates ``{{include}}`` block.
+  
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    re_block
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +re.compile(r'(?s)^(elif |else:|except:|except |finally:).*$')
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    re_unblock
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +re.compile(r'(?s)^(return|continue|break|raise)( .*)?$')
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.tools-module.html
Index: applications/examples/static/epydoc/web2py.gluon.tools-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.tools-module.html
@@ -0,0 +1,539 @@
+
+
+
+
+  web2py.gluon.tools
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module tools
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module tools
    source code

    
+This file is part of the web2py Web Framework Copyrighted by Massimo 
+  Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        Mail
    
+      Class for configuring and sending emails with alternative text /
+        html body, multiple attachments and encryption support
+    
    
+       
+    
+        Recaptcha
+    
    
+       
+    
+        Auth
    
+      Class for authentication, authorization, role based access control.
+    
    
+       
+    
+        Crud
+    
    
+       
+    
+        Service
+    
    
+       
+    
+        PluginManager
    
+      Plugin Manager is similar to a storage object but it is a single
+        level singleton this means that multiple instances within the same 
+        thread share the same attributes Its constructor is also 
+        special.
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    DEFAULT()
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    callback(actions,
+        form,
+        tablename=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    validators(*a)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    call_or_redirect(f,
+        *args)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    addrow(form,
+        a,
+        b,
+        c,
+        style,
+        _id,
+        position=-1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    fetch(url,
+        data=1,
+        headers={},
+        cookie=<SimpleCookie: >,
+        user_agent='Mozilla/5.0')
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    geocode(address)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    universal_caller(f,
+        *a,
+        **b)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    completion(callback)
    
+      Executes a task on completion of the called action.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    prettydate(d,
+        T=<function <lambda> at 0x2543668>)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    test_thread_separation()
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        logger = logging.getLogger("web2py")
+    
    
+       
+    
+        regex_geocode = re.compile(r'<coordinates>(?P<la>[^,]*),(?P<lo...
+    
    
+       
+    
+        ON = True
+    
    
+       
+    
+        TAG = <gluon.html.__TAG__ object at 0x2128f10>
+    
    
+       
+    
+        current = <thread._local object at 0x1f4ab10>
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Function Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    completion(callback)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Executes a task on completion of the called action. For example:
+
+    from gluon.tools import completion
+    @completion(lambda d: logging.info(repr(d)))
+    def index():
+        return dict(message='hello')
+
+It logs the output of the function every time input is called.
+The argument of completion is executed in a new thread.
+
+
    
+  
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Variables Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    regex_geocode
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +re.compile(r'<coordinates>(?P<la>[^,]*),(?P<lo>[^,]*).*?</coordinates>\
+')
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.tools-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.tools-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.tools-pysrc.html
@@ -0,0 +1,6250 @@
+
+
+
+
+  web2py.gluon.tools
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module tools
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.tools
    
+
    +   1  #!/bin/python 
+   2  # -*- coding: utf-8 -*- 
+   3   
+   4  """ 
+   5  This file is part of the web2py Web Framework 
+   6  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+   7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+   8  """ 
+   9   
+  10  import base64 
+  11  import cPickle 
+  12  import datetime 
+  13  import thread 
+  14  import logging 
+  15  import sys 
+  16  import os 
+  17  import re 
+  18  import time 
+  19  import copy 
+  20  import smtplib 
+  21  import urllib 
+  22  import urllib2 
+  23  import Cookie 
+  24  import cStringIO 
+  25  from email import MIMEBase, MIMEMultipart, MIMEText, Encoders, Header, message_from_string 
+  26   
+  27  from contenttype import contenttype 
+  28  from storage import Storage, StorageList, Settings, Messages 
+  29  from utils import web2py_uuid 
+  30  from gluon import * 
+  31  from fileutils import read_file 
+  32   
+  33  import serializers 
+  34  import contrib.simplejson as simplejson 
+  35   
+  36   
+  37  __all__ = ['Mail', 'Auth', 'Recaptcha', 'Crud', 'Service', 'PluginManager', 'fetch', 'geocode', 'prettydate'] 
+  38   
+  39  logger = logging.getLogger("web2py") 
+  40   
+  41  DEFAULT = lambda: None 
+  42   
+
      43 -def callback(actions,form,tablename=None): 
+
      44      if actions: 
+  45          if tablename and isinstance(actions,dict): 
+  46              actions = actions.get(tablename, []) 
+  47          if not isinstance(actions,(list, tuple)): 
+  48              actions = [actions] 
+  49          [action(form) for action in actions] 
+
      50   
+
      51 -def validators(*a): 
+
      52      b = [] 
+  53      for item in a: 
+  54          if isinstance(item, (list, tuple)): 
+  55              b = b + list(item) 
+  56          else: 
+  57              b.append(item) 
+  58      return b 
+
      59   
+
      60 -def call_or_redirect(f,*args): 
+
      61      if callable(f): 
+  62          redirect(f(*args)) 
+  63      else: 
+  64          redirect(f) 
+
      65   
+
      66 -class Mail(object): 
+
      67      """ 
+  68      Class for configuring and sending emails with alternative text / html 
+  69      body, multiple attachments and encryption support 
+  70   
+  71      Works with SMTP and Google App Engine. 
+  72      """ 
+  73   
+
      74 -    class Attachment(MIMEBase.MIMEBase): 
+
      75          """ 
+  76          Email attachment 
+  77   
+  78          Arguments:: 
+  79   
+  80              payload: path to file or file-like object with read() method 
+  81              filename: name of the attachment stored in message; if set to 
+  82                        None, it will be fetched from payload path; file-like 
+  83                        object payload must have explicit filename specified 
+  84              content_id: id of the attachment; automatically contained within 
+  85                          < and > 
+  86              content_type: content type of the attachment; if set to None, 
+  87                            it will be fetched from filename using gluon.contenttype 
+  88                            module 
+  89              encoding: encoding of all strings passed to this function (except 
+  90                        attachment body) 
+  91   
+  92          Content ID is used to identify attachments within the html body; 
+  93          in example, attached image with content ID 'photo' may be used in 
+  94          html message as a source of img tag <img src="cid:photo" />. 
+  95   
+  96          Examples:: 
+  97   
+  98              #Create attachment from text file: 
+  99              attachment = Mail.Attachment('/path/to/file.txt') 
+ 100   
+ 101              Content-Type: text/plain 
+ 102              MIME-Version: 1.0 
+ 103              Content-Disposition: attachment; filename="file.txt" 
+ 104              Content-Transfer-Encoding: base64 
+ 105   
+ 106              SOMEBASE64CONTENT= 
+ 107   
+ 108              #Create attachment from image file with custom filename and cid: 
+ 109              attachment = Mail.Attachment('/path/to/file.png', 
+ 110                                               filename='photo.png', 
+ 111                                               content_id='photo') 
+ 112   
+ 113              Content-Type: image/png 
+ 114              MIME-Version: 1.0 
+ 115              Content-Disposition: attachment; filename="photo.png" 
+ 116              Content-Id: <photo> 
+ 117              Content-Transfer-Encoding: base64 
+ 118   
+ 119              SOMEOTHERBASE64CONTENT= 
+ 120          """ 
+ 121   
+
     122 -        def __init__( 
+ 123              self, 
+ 124              payload, 
+ 125              filename=None, 
+ 126              content_id=None, 
+ 127              content_type=None, 
+ 128              encoding='utf-8'): 
+
     129              if isinstance(payload, str): 
+ 130                  if filename == None: 
+ 131                      filename = os.path.basename(payload) 
+ 132                  payload = read_file(payload, 'rb') 
+ 133              else: 
+ 134                  if filename == None: 
+ 135                      raise Exception('Missing attachment name') 
+ 136                  payload = payload.read() 
+ 137              filename = filename.encode(encoding) 
+ 138              if content_type == None: 
+ 139                  content_type = contenttype(filename) 
+ 140              self.my_filename = filename 
+ 141              self.my_payload = payload 
+ 142              MIMEBase.MIMEBase.__init__(self, *content_type.split('/', 1)) 
+ 143              self.set_payload(payload) 
+ 144              self['Content-Disposition'] = 'attachment; filename="%s"' % filename 
+ 145              if content_id != None: 
+ 146                  self['Content-Id'] = '<%s>' % content_id.encode(encoding) 
+ 147              Encoders.encode_base64(self) 
+
     148   
+
     149 -    def __init__(self, server=None, sender=None, login=None, tls=True): 
+
     150          """ 
+ 151          Main Mail object 
+ 152   
+ 153          Arguments:: 
+ 154   
+ 155              server: SMTP server address in address:port notation 
+ 156              sender: sender email address 
+ 157              login: sender login name and password in login:password notation 
+ 158                     or None if no authentication is required 
+ 159              tls: enables/disables encryption (True by default) 
+ 160   
+ 161          In Google App Engine use:: 
+ 162   
+ 163              server='gae' 
+ 164   
+ 165          For sake of backward compatibility all fields are optional and default 
+ 166          to None, however, to be able to send emails at least server and sender 
+ 167          must be specified. They are available under following fields: 
+ 168   
+ 169              mail.settings.server 
+ 170              mail.settings.sender 
+ 171              mail.settings.login 
+ 172   
+ 173          When server is 'logging', email is logged but not sent (debug mode) 
+ 174   
+ 175          Optionally you can use PGP encryption or X509: 
+ 176   
+ 177              mail.settings.cipher_type = None 
+ 178              mail.settings.sign = True 
+ 179              mail.settings.sign_passphrase = None 
+ 180              mail.settings.encrypt = True 
+ 181              mail.settings.x509_sign_keyfile = None 
+ 182              mail.settings.x509_sign_certfile = None 
+ 183              mail.settings.x509_crypt_certfiles = None 
+ 184   
+ 185              cipher_type       : None 
+ 186                                  gpg - need a python-pyme package and gpgme lib 
+ 187                                  x509 - smime 
+ 188              sign              : sign the message (True or False) 
+ 189              sign_passphrase   : passphrase for key signing 
+ 190              encrypt           : encrypt the message 
+ 191                               ... x509 only ... 
+ 192              x509_sign_keyfile : the signers private key filename (PEM format) 
+ 193              x509_sign_certfile: the signers certificate filename (PEM format) 
+ 194              x509_crypt_certfiles: the certificates file to encrypt the messages 
+ 195                                    with can be a file name or a list of 
+ 196                                    file names (PEM format) 
+ 197   
+ 198          Examples:: 
+ 199   
+ 200              #Create Mail object with authentication data for remote server: 
+ 201              mail = Mail('example.com:25', 'me@example.com', 'me:password') 
+ 202          """ 
+ 203   
+ 204          settings = self.settings = Settings() 
+ 205          settings.server = server 
+ 206          settings.sender = sender 
+ 207          settings.login = login 
+ 208          settings.tls = tls 
+ 209          settings.ssl = False 
+ 210          settings.cipher_type = None 
+ 211          settings.sign = True 
+ 212          settings.sign_passphrase = None 
+ 213          settings.encrypt = True 
+ 214          settings.x509_sign_keyfile = None 
+ 215          settings.x509_sign_certfile = None 
+ 216          settings.x509_crypt_certfiles = None 
+ 217          settings.debug = False 
+ 218          settings.lock_keys = True 
+ 219          self.result = {} 
+ 220          self.error = None 
+
     221   
+
     222 -    def send( 
+ 223          self, 
+ 224          to, 
+ 225          subject='None', 
+ 226          message='None', 
+ 227          attachments=None, 
+ 228          cc=None, 
+ 229          bcc=None, 
+ 230          reply_to=None, 
+ 231          encoding='utf-8', 
+ 232          ): 
+
     233          """ 
+ 234          Sends an email using data specified in constructor 
+ 235   
+ 236          Arguments:: 
+ 237   
+ 238              to: list or tuple of receiver addresses; will also accept single 
+ 239                  object 
+ 240              subject: subject of the email 
+ 241              message: email body text; depends on type of passed object: 
+ 242                       if 2-list or 2-tuple is passed: first element will be 
+ 243                       source of plain text while second of html text; 
+ 244                       otherwise: object will be the only source of plain text 
+ 245                       and html source will be set to None; 
+ 246                       If text or html source is: 
+ 247                       None: content part will be ignored, 
+ 248                       string: content part will be set to it, 
+ 249                       file-like object: content part will be fetched from 
+ 250                                         it using it's read() method 
+ 251              attachments: list or tuple of Mail.Attachment objects; will also 
+ 252                           accept single object 
+ 253              cc: list or tuple of carbon copy receiver addresses; will also 
+ 254                  accept single object 
+ 255              bcc: list or tuple of blind carbon copy receiver addresses; will 
+ 256                  also accept single object 
+ 257              reply_to: address to which reply should be composed 
+ 258              encoding: encoding of all strings passed to this method (including 
+ 259                        message bodies) 
+ 260   
+ 261          Examples:: 
+ 262   
+ 263              #Send plain text message to single address: 
+ 264              mail.send('you@example.com', 
+ 265                        'Message subject', 
+ 266                        'Plain text body of the message') 
+ 267   
+ 268              #Send html message to single address: 
+ 269              mail.send('you@example.com', 
+ 270                        'Message subject', 
+ 271                        '<html>Plain text body of the message</html>') 
+ 272   
+ 273              #Send text and html message to three addresses (two in cc): 
+ 274              mail.send('you@example.com', 
+ 275                        'Message subject', 
+ 276                        ('Plain text body', '<html>html body</html>'), 
+ 277                        cc=['other1@example.com', 'other2@example.com']) 
+ 278   
+ 279              #Send html only message with image attachment available from 
+ 280              the message by 'photo' content id: 
+ 281              mail.send('you@example.com', 
+ 282                        'Message subject', 
+ 283                        (None, '<html><img src="cid:photo" /></html>'), 
+ 284                        Mail.Attachment('/path/to/photo.jpg' 
+ 285                                        content_id='photo')) 
+ 286   
+ 287              #Send email with two attachments and no body text 
+ 288              mail.send('you@example.com, 
+ 289                        'Message subject', 
+ 290                        None, 
+ 291                        [Mail.Attachment('/path/to/fist.file'), 
+ 292                         Mail.Attachment('/path/to/second.file')]) 
+ 293   
+ 294          Returns True on success, False on failure. 
+ 295   
+ 296          Before return, method updates two object's fields: 
+ 297          self.result: return value of smtplib.SMTP.sendmail() or GAE's 
+ 298                       mail.send_mail() method 
+ 299          self.error: Exception message or None if above was successful 
+ 300          """ 
+ 301   
+ 302          def encode_header(key): 
+ 303              if [c for c in key if 32>ord(c) or ord(c)>127]: 
+ 304                  return Header.Header(key.encode('utf-8'),'utf-8') 
+ 305              else: 
+ 306                  return key 
+
     307   
+ 308          if not isinstance(self.settings.server, str): 
+ 309              raise Exception('Server address not specified') 
+ 310          if not isinstance(self.settings.sender, str): 
+ 311              raise Exception('Sender address not specified') 
+ 312          payload_in = MIMEMultipart.MIMEMultipart('mixed') 
+ 313          if to: 
+ 314              if not isinstance(to, (list,tuple)): 
+ 315                  to = [to] 
+ 316          else: 
+ 317              raise Exception('Target receiver address not specified') 
+ 318          if cc: 
+ 319              if not isinstance(cc, (list, tuple)): 
+ 320                  cc = [cc] 
+ 321          if bcc: 
+ 322              if not isinstance(bcc, (list, tuple)): 
+ 323                  bcc = [bcc] 
+ 324          if message == None: 
+ 325              text = html = None 
+ 326          elif isinstance(message, (list, tuple)): 
+ 327              text, html = message 
+ 328          elif message.strip().startswith('<html') and message.strip().endswith('</html>'): 
+ 329              text = self.settings.server=='gae' and message or None 
+ 330              html = message 
+ 331          else: 
+ 332              text = message 
+ 333              html = None 
+ 334          if text != None or html != None: 
+ 335              attachment = MIMEMultipart.MIMEMultipart('alternative') 
+ 336              if text != None: 
+ 337                  if isinstance(text, basestring): 
+ 338                      text = text.decode(encoding).encode('utf-8') 
+ 339                  else: 
+ 340                      text = text.read().decode(encoding).encode('utf-8') 
+ 341                  attachment.attach(MIMEText.MIMEText(text,_charset='utf-8')) 
+ 342              if html != None: 
+ 343                  if isinstance(html, basestring): 
+ 344                      html = html.decode(encoding).encode('utf-8') 
+ 345                  else: 
+ 346                      html = html.read().decode(encoding).encode('utf-8') 
+ 347                  attachment.attach(MIMEText.MIMEText(html, 'html',_charset='utf-8')) 
+ 348              payload_in.attach(attachment) 
+ 349          if attachments == None: 
+ 350              pass 
+ 351          elif isinstance(attachments, (list, tuple)): 
+ 352              for attachment in attachments: 
+ 353                  payload_in.attach(attachment) 
+ 354          else: 
+ 355              payload_in.attach(attachments) 
+ 356   
+ 357   
+ 358          ####################################################### 
+ 359          #                      CIPHER                         # 
+ 360          ####################################################### 
+ 361          cipher_type = self.settings.cipher_type 
+ 362          sign = self.settings.sign 
+ 363          sign_passphrase = self.settings.sign_passphrase 
+ 364          encrypt = self.settings.encrypt 
+ 365          ####################################################### 
+ 366          #                       GPGME                         # 
+ 367          ####################################################### 
+ 368          if cipher_type == 'gpg': 
+ 369              if not sign and not encrypt: 
+ 370                  self.error="No sign and no encrypt is set but cipher type to gpg" 
+ 371                  return False 
+ 372   
+ 373              # need a python-pyme package and gpgme lib 
+ 374              from pyme import core, errors 
+ 375              from pyme.constants.sig import mode 
+ 376              ############################################ 
+ 377              #                   sign                   # 
+ 378              ############################################ 
+ 379              if sign: 
+ 380                  import string 
+ 381                  core.check_version(None) 
+ 382                  pin=string.replace(payload_in.as_string(),'\n','\r\n') 
+ 383                  plain = core.Data(pin) 
+ 384                  sig = core.Data() 
+ 385                  c = core.Context() 
+ 386                  c.set_armor(1) 
+ 387                  c.signers_clear() 
+ 388                  # search for signing key for From: 
+ 389                  for sigkey in c.op_keylist_all(self.settings.sender, 1): 
+ 390                      if sigkey.can_sign: 
+ 391                          c.signers_add(sigkey) 
+ 392                  if not c.signers_enum(0): 
+ 393                      self.error='No key for signing [%s]' % self.settings.sender 
+ 394                      return False 
+ 395                  c.set_passphrase_cb(lambda x,y,z: sign_passphrase) 
+ 396                  try: 
+ 397                      # make a signature 
+ 398                      c.op_sign(plain,sig,mode.DETACH) 
+ 399                      sig.seek(0,0) 
+ 400                      # make it part of the email 
+ 401                      payload=MIMEMultipart.MIMEMultipart('signed', 
+ 402                                                          boundary=None, 
+ 403                                                          _subparts=None, 
+ 404                                                          **dict(micalg="pgp-sha1", 
+ 405                                                                 protocol="application/pgp-signature")) 
+ 406                      # insert the origin payload 
+ 407                      payload.attach(payload_in) 
+ 408                      # insert the detached signature 
+ 409                      p=MIMEBase.MIMEBase("application",'pgp-signature') 
+ 410                      p.set_payload(sig.read()) 
+ 411                      payload.attach(p) 
+ 412                      # it's just a trick to handle the no encryption case 
+ 413                      payload_in=payload 
+ 414                  except errors.GPGMEError, ex: 
+ 415                      self.error="GPG error: %s" % ex.getstring() 
+ 416                      return False 
+ 417              ############################################ 
+ 418              #                  encrypt                 # 
+ 419              ############################################ 
+ 420              if encrypt: 
+ 421                  core.check_version(None) 
+ 422                  plain = core.Data(payload_in.as_string()) 
+ 423                  cipher = core.Data() 
+ 424                  c = core.Context() 
+ 425                  c.set_armor(1) 
+ 426                  # collect the public keys for encryption 
+ 427                  recipients=[] 
+ 428                  rec=to[:] 
+ 429                  if cc: 
+ 430                      rec.extend(cc) 
+ 431                  if bcc: 
+ 432                      rec.extend(bcc) 
+ 433                  for addr in rec: 
+ 434                      c.op_keylist_start(addr,0) 
+ 435                      r = c.op_keylist_next() 
+ 436                      if r == None: 
+ 437                          self.error='No key for [%s]' % addr 
+ 438                          return False 
+ 439                      recipients.append(r) 
+ 440                  try: 
+ 441                      # make the encryption 
+ 442                      c.op_encrypt(recipients, 1, plain, cipher) 
+ 443                      cipher.seek(0,0) 
+ 444                      # make it a part of the email 
+ 445                      payload=MIMEMultipart.MIMEMultipart('encrypted', 
+ 446                                                          boundary=None, 
+ 447                                                          _subparts=None, 
+ 448                                                          **dict(protocol="application/pgp-encrypted")) 
+ 449                      p=MIMEBase.MIMEBase("application",'pgp-encrypted') 
+ 450                      p.set_payload("Version: 1\r\n") 
+ 451                      payload.attach(p) 
+ 452                      p=MIMEBase.MIMEBase("application",'octet-stream') 
+ 453                      p.set_payload(cipher.read()) 
+ 454                      payload.attach(p) 
+ 455                  except errors.GPGMEError, ex: 
+ 456                      self.error="GPG error: %s" % ex.getstring() 
+ 457                      return False 
+ 458          ####################################################### 
+ 459          #                       X.509                         # 
+ 460          ####################################################### 
+ 461          elif cipher_type == 'x509': 
+ 462              if not sign and not encrypt: 
+ 463                  self.error="No sign and no encrypt is set but cipher type to x509" 
+ 464                  return False 
+ 465              x509_sign_keyfile=self.settings.x509_sign_keyfile 
+ 466              if self.settings.x509_sign_certfile: 
+ 467                  x509_sign_certfile=self.settings.x509_sign_certfile 
+ 468              else: 
+ 469                  # if there is no sign certfile we'll assume the 
+ 470                  # cert is in keyfile 
+ 471                  x509_sign_certfile=self.settings.x509_sign_keyfile 
+ 472              # crypt certfiles could be a string or a list 
+ 473              x509_crypt_certfiles=self.settings.x509_crypt_certfiles 
+ 474   
+ 475   
+ 476              # need m2crypto 
+ 477              from M2Crypto import BIO, SMIME, X509 
+ 478              msg_bio = BIO.MemoryBuffer(payload_in.as_string()) 
+ 479              s = SMIME.SMIME() 
+ 480   
+ 481              #                   SIGN 
+ 482              if sign: 
+ 483                  #key for signing 
+ 484                  try: 
+ 485                      s.load_key(x509_sign_keyfile, x509_sign_certfile, callback=lambda x: sign_passphrase) 
+ 486                      if encrypt: 
+ 487                          p7 = s.sign(msg_bio) 
+ 488                      else: 
+ 489                          p7 = s.sign(msg_bio,flags=SMIME.PKCS7_DETACHED) 
+ 490                      msg_bio = BIO.MemoryBuffer(payload_in.as_string()) # Recreate coz sign() has consumed it. 
+ 491                  except Exception,e: 
+ 492                      self.error="Something went wrong on signing: <%s>" %str(e) 
+ 493                      return False 
+ 494   
+ 495              #                   ENCRYPT 
+ 496              if encrypt: 
+ 497                  try: 
+ 498                      sk = X509.X509_Stack() 
+ 499                      if not isinstance(x509_crypt_certfiles, (list, tuple)): 
+ 500                          x509_crypt_certfiles = [x509_crypt_certfiles] 
+ 501   
+ 502                      # make an encryption cert's stack 
+ 503                      for x in x509_crypt_certfiles: 
+ 504                          sk.push(X509.load_cert(x)) 
+ 505                      s.set_x509_stack(sk) 
+ 506   
+ 507                      s.set_cipher(SMIME.Cipher('des_ede3_cbc')) 
+ 508                      tmp_bio = BIO.MemoryBuffer() 
+ 509                      if sign: 
+ 510                          s.write(tmp_bio, p7) 
+ 511                      else: 
+ 512                          tmp_bio.write(payload_in.as_string()) 
+ 513                      p7 = s.encrypt(tmp_bio) 
+ 514                  except Exception,e: 
+ 515                      self.error="Something went wrong on encrypting: <%s>" %str(e) 
+ 516                      return False 
+ 517   
+ 518              #                 Final stage in sign and encryption 
+ 519              out = BIO.MemoryBuffer() 
+ 520              if encrypt: 
+ 521                  s.write(out, p7) 
+ 522              else: 
+ 523                  if sign: 
+ 524                      s.write(out, p7, msg_bio, SMIME.PKCS7_DETACHED) 
+ 525                  else: 
+ 526                      out.write('\r\n') 
+ 527                      out.write(payload_in.as_string()) 
+ 528              out.close() 
+ 529              st=str(out.read()) 
+ 530              payload=message_from_string(st) 
+ 531          else: 
+ 532              # no cryptography process as usual 
+ 533              payload=payload_in 
+ 534          payload['From'] = encode_header(self.settings.sender.decode(encoding)) 
+ 535          origTo = to[:] 
+ 536          if to: 
+ 537              payload['To'] = encode_header(', '.join(to).decode(encoding)) 
+ 538          if reply_to: 
+ 539              payload['Reply-To'] = encode_header(reply_to.decode(encoding)) 
+ 540          if cc: 
+ 541              payload['Cc'] = encode_header(', '.join(cc).decode(encoding)) 
+ 542              to.extend(cc) 
+ 543          if bcc: 
+ 544              to.extend(bcc) 
+ 545          payload['Subject'] = encode_header(subject.decode(encoding)) 
+ 546          payload['Date'] = time.strftime("%a, %d %b %Y %H:%M:%S +0000", 
+ 547                                          time.gmtime()) 
+ 548          result = {} 
+ 549          try: 
+ 550              if self.settings.server == 'logging': 
+ 551                  logger.warn('email not sent\n%s\nFrom: %s\nTo: %s\n\n%s\n%s\n' % \ 
+ 552                                   ('-'*40,self.settings.sender, 
+ 553                                    ', '.join(to),text or html,'-'*40)) 
+ 554              elif self.settings.server == 'gae': 
+ 555                  xcc = dict() 
+ 556                  if cc: 
+ 557                      xcc['cc'] = cc 
+ 558                  if bcc: 
+ 559                      xcc['bcc'] = bcc 
+ 560                  from google.appengine.api import mail 
+ 561                  attachments = attachments and [(a.my_filename,a.my_payload) for a in attachments] 
+ 562                  if attachments: 
+ 563                      result = mail.send_mail(sender=self.settings.sender, to=origTo, 
+ 564                                              subject=subject, body=text, html=html, 
+ 565                                              attachments=attachments, **xcc) 
+ 566                  elif html: 
+ 567                      result = mail.send_mail(sender=self.settings.sender, to=origTo, 
+ 568                                              subject=subject, body=text, html=html, **xcc) 
+ 569                  else: 
+ 570                      result = mail.send_mail(sender=self.settings.sender, to=origTo, 
+ 571                                              subject=subject, body=text, **xcc) 
+ 572              else: 
+ 573                  smtp_args = self.settings.server.split(':') 
+ 574                  if self.settings.ssl:  
+ 575                      server = smtplib.SMTP_SSL(*smtp_args) 
+ 576                  else:  
+ 577                      server = smtplib.SMTP(*smtp_args) 
+ 578                  if self.settings.tls and not self.settings.ssl:                 
+ 579                      server.ehlo() 
+ 580                      server.starttls() 
+ 581                      server.ehlo() 
+ 582                  if self.settings.login != None: 
+ 583                      server.login(*self.settings.login.split(':',1)) 
+ 584                  result = server.sendmail(self.settings.sender, to, payload.as_string()) 
+ 585                  server.quit() 
+ 586          except Exception, e: 
+ 587              logger.warn('Mail.send failure:%s' % e) 
+ 588              self.result = result 
+ 589              self.error = e 
+ 590              return False 
+ 591          self.result = result 
+ 592          self.error = None 
+ 593          return True 
+
     594   
+ 595   
+
     596 -class Recaptcha(DIV): 
+
     597   
+ 598      API_SSL_SERVER = 'https://www.google.com/recaptcha/api' 
+ 599      API_SERVER = 'http://www.google.com/recaptcha/api' 
+ 600      VERIFY_SERVER = 'http://www.google.com/recaptcha/api/verify' 
+ 601   
+
     602 -    def __init__( 
+ 603          self, 
+ 604          request, 
+ 605          public_key='', 
+ 606          private_key='', 
+ 607          use_ssl=False, 
+ 608          error=None, 
+ 609          error_message='invalid', 
+ 610          label = 'Verify:', 
+ 611          options = '' 
+ 612          ): 
+
     613          self.remote_addr = request.env.remote_addr 
+ 614          self.public_key = public_key 
+ 615          self.private_key = private_key 
+ 616          self.use_ssl = use_ssl 
+ 617          self.error = error 
+ 618          self.errors = Storage() 
+ 619          self.error_message = error_message 
+ 620          self.components = [] 
+ 621          self.attributes = {} 
+ 622          self.label = label 
+ 623          self.options = options 
+ 624          self.comment = '' 
+
     625   
+
     626 -    def _validate(self): 
+
     627   
+ 628          # for local testing: 
+ 629   
+ 630          recaptcha_challenge_field = \ 
+ 631              self.request_vars.recaptcha_challenge_field 
+ 632          recaptcha_response_field = \ 
+ 633              self.request_vars.recaptcha_response_field 
+ 634          private_key = self.private_key 
+ 635          remoteip = self.remote_addr 
+ 636          if not (recaptcha_response_field and recaptcha_challenge_field 
+ 637                   and len(recaptcha_response_field) 
+ 638                   and len(recaptcha_challenge_field)): 
+ 639              self.errors['captcha'] = self.error_message 
+ 640              return False 
+ 641          params = urllib.urlencode({ 
+ 642              'privatekey': private_key, 
+ 643              'remoteip': remoteip, 
+ 644              'challenge': recaptcha_challenge_field, 
+ 645              'response': recaptcha_response_field, 
+ 646              }) 
+ 647          request = urllib2.Request( 
+ 648              url=self.VERIFY_SERVER, 
+ 649              data=params, 
+ 650              headers={'Content-type': 'application/x-www-form-urlencoded', 
+ 651                          'User-agent': 'reCAPTCHA Python'}) 
+ 652          httpresp = urllib2.urlopen(request) 
+ 653          return_values = httpresp.read().splitlines() 
+ 654          httpresp.close() 
+ 655          return_code = return_values[0] 
+ 656          if return_code == 'true': 
+ 657              del self.request_vars.recaptcha_challenge_field 
+ 658              del self.request_vars.recaptcha_response_field 
+ 659              self.request_vars.captcha = '' 
+ 660              return True 
+ 661          self.errors['captcha'] = self.error_message 
+ 662          return False 
+
     663   
+
     664 -    def xml(self): 
+
     665          public_key = self.public_key 
+ 666          use_ssl = self.use_ssl 
+ 667          error_param = '' 
+ 668          if self.error: 
+ 669              error_param = '&error=%s' % self.error 
+ 670          if use_ssl: 
+ 671              server = self.API_SSL_SERVER 
+ 672          else: 
+ 673              server = self.API_SERVER 
+ 674          captcha = DIV( 
+ 675              SCRIPT("var RecaptchaOptions = {%s};" % self.options), 
+ 676              SCRIPT(_type="text/javascript", 
+ 677                     _src="%s/challenge?k=%s%s" % (server,public_key,error_param)), 
+ 678              TAG.noscript(IFRAME(_src="%s/noscript?k=%s%s" % (server,public_key,error_param), 
+ 679                                  _height="300",_width="500",_frameborder="0"), BR(), 
+ 680                           INPUT(_type='hidden', _name='recaptcha_response_field', 
+ 681                                 _value='manual_challenge')), _id='recaptcha') 
+ 682          if not self.errors.captcha: 
+ 683              return XML(captcha).xml() 
+ 684          else: 
+ 685              captcha.append(DIV(self.errors['captcha'], _class='error')) 
+ 686              return XML(captcha).xml() 
+
     687   
+ 688   
+
     689 -def addrow(form,a,b,c,style,_id,position=-1): 
+
     690      if style == "divs": 
+ 691          form[0].insert(position, DIV(DIV(LABEL(a),_class='w2p_fl'), 
+ 692                                       DIV(b, _class='w2p_fw'), 
+ 693                                       DIV(c, _class='w2p_fc'), 
+ 694                                       _id = _id)) 
+ 695      elif style == "table2cols": 
+ 696          form[0].insert(position, TR(LABEL(a),'')) 
+ 697          form[0].insert(position+1, TR(b, _colspan=2, _id = _id)) 
+ 698      elif style == "ul": 
+ 699          form[0].insert(position, LI(DIV(LABEL(a),_class='w2p_fl'), 
+ 700                                      DIV(b, _class='w2p_fw'), 
+ 701                                      DIV(c, _class='w2p_fc'), 
+ 702                                      _id = _id)) 
+ 703      else: 
+ 704          form[0].insert(position, TR(LABEL(a),b,c,_id = _id)) 
+
     705   
+ 706   
+
     707 -class Auth(object): 
+
     708      """ 
+ 709      Class for authentication, authorization, role based access control. 
+ 710   
+ 711      Includes: 
+ 712   
+ 713      - registration and profile 
+ 714      - login and logout 
+ 715      - username and password retrieval 
+ 716      - event logging 
+ 717      - role creation and assignment 
+ 718      - user defined group/role based permission 
+ 719   
+ 720      Authentication Example:: 
+ 721   
+ 722          from contrib.utils import * 
+ 723          mail=Mail() 
+ 724          mail.settings.server='smtp.gmail.com:587' 
+ 725          mail.settings.sender='you@somewhere.com' 
+ 726          mail.settings.login='username:password' 
+ 727          auth=Auth(globals(), db) 
+ 728          auth.settings.mailer=mail 
+ 729          # auth.settings....=... 
+ 730          auth.define_tables() 
+ 731          def authentication(): 
+ 732              return dict(form=auth()) 
+ 733   
+ 734      exposes: 
+ 735   
+ 736      - http://.../{application}/{controller}/authentication/login 
+ 737      - http://.../{application}/{controller}/authentication/logout 
+ 738      - http://.../{application}/{controller}/authentication/register 
+ 739      - http://.../{application}/{controller}/authentication/verify_email 
+ 740      - http://.../{application}/{controller}/authentication/retrieve_username 
+ 741      - http://.../{application}/{controller}/authentication/retrieve_password 
+ 742      - http://.../{application}/{controller}/authentication/reset_password 
+ 743      - http://.../{application}/{controller}/authentication/profile 
+ 744      - http://.../{application}/{controller}/authentication/change_password 
+ 745   
+ 746      On registration a group with role=new_user.id is created 
+ 747      and user is given membership of this group. 
+ 748   
+ 749      You can create a group with:: 
+ 750   
+ 751          group_id=auth.add_group('Manager', 'can access the manage action') 
+ 752          auth.add_permission(group_id, 'access to manage') 
+ 753   
+ 754      Here \"access to manage\" is just a user defined string. 
+ 755      You can give access to a user:: 
+ 756   
+ 757          auth.add_membership(group_id, user_id) 
+ 758   
+ 759      If user id is omitted, the logged in user is assumed 
+ 760   
+ 761      Then you can decorate any action:: 
+ 762   
+ 763          @auth.requires_permission('access to manage') 
+ 764          def manage(): 
+ 765              return dict() 
+ 766   
+ 767      You can restrict a permission to a specific table:: 
+ 768   
+ 769          auth.add_permission(group_id, 'edit', db.sometable) 
+ 770          @auth.requires_permission('edit', db.sometable) 
+ 771   
+ 772      Or to a specific record:: 
+ 773   
+ 774          auth.add_permission(group_id, 'edit', db.sometable, 45) 
+ 775          @auth.requires_permission('edit', db.sometable, 45) 
+ 776   
+ 777      If authorization is not granted calls:: 
+ 778   
+ 779          auth.settings.on_failed_authorization 
+ 780   
+ 781      Other options:: 
+ 782   
+ 783          auth.settings.mailer=None 
+ 784          auth.settings.expiration=3600 # seconds 
+ 785   
+ 786          ... 
+ 787   
+ 788          ### these are messages that can be customized 
+ 789          ... 
+ 790      """ 
+ 791   
+ 792   
+
     793 -    def url(self, f=None, args=[], vars={}): 
+
     794          return URL(c=self.settings.controller,f=f,args=args,vars=vars) 
+
     795   
+
     796 -    def __init__(self, environment=None, db=None, 
+ 797                   controller='default', cas_provider = None): 
+
     798          """ 
+ 799          auth=Auth(globals(), db) 
+ 800   
+ 801          - environment is there for legacy but unused (awful) 
+ 802          - db has to be the database where to create tables for authentication 
+ 803   
+ 804          """ 
+ 805          ## next two lines for backward compatibility 
+ 806          if not db and environment and isinstance(environment,DAL): 
+ 807              db = environment 
+ 808          self.db = db 
+ 809          self.environment = current 
+ 810          request = current.request 
+ 811          session = current.session 
+ 812          auth = session.auth 
+ 813          if auth and auth.last_visit and auth.last_visit + \ 
+ 814                  datetime.timedelta(days=0, seconds=auth.expiration) > request.now: 
+ 815              self.user = auth.user 
+ 816              # this is a trick to speed up sessions 
+ 817              if (request.now - auth.last_visit).seconds > (auth.expiration/10): 
+ 818                  auth.last_visit = request.now 
+ 819          else: 
+ 820              self.user = None 
+ 821              session.auth = None 
+ 822          settings = self.settings = Settings() 
+ 823   
+ 824          # ## what happens after login? 
+ 825   
+ 826          # ## what happens after registration? 
+ 827   
+ 828          settings.hideerror = False 
+ 829          settings.cas_domains = [request.env.http_host] 
+ 830          settings.cas_provider = cas_provider 
+ 831          settings.extra_fields = {} 
+ 832          settings.actions_disabled = [] 
+ 833          settings.reset_password_requires_verification = False 
+ 834          settings.registration_requires_verification = False 
+ 835          settings.registration_requires_approval = False 
+ 836          settings.alternate_requires_registration = False 
+ 837          settings.create_user_groups = True 
+ 838   
+ 839          settings.controller = controller 
+ 840          settings.login_url = self.url('user', args='login') 
+ 841          settings.logged_url = self.url('user', args='profile') 
+ 842          settings.download_url = self.url('download') 
+ 843          settings.mailer = None 
+ 844          settings.login_captcha = None 
+ 845          settings.register_captcha = None 
+ 846          settings.retrieve_username_captcha = None 
+ 847          settings.retrieve_password_captcha = None 
+ 848          settings.captcha = None 
+ 849          settings.expiration = 3600            # one hour 
+ 850          settings.long_expiration = 3600*30*24 # one month 
+ 851          settings.remember_me_form = True 
+ 852          settings.allow_basic_login = False 
+ 853          settings.allow_basic_login_only = False 
+ 854          settings.on_failed_authorization = \ 
+ 855              self.url('user',args='not_authorized') 
+ 856   
+ 857          settings.on_failed_authentication = lambda x: redirect(x) 
+ 858   
+ 859          settings.formstyle = 'table3cols' 
+ 860          settings.label_separator = ': ' 
+ 861   
+ 862          # ## table names to be used 
+ 863   
+ 864          settings.password_field = 'password' 
+ 865          settings.table_user_name = 'auth_user' 
+ 866          settings.table_group_name = 'auth_group' 
+ 867          settings.table_membership_name = 'auth_membership' 
+ 868          settings.table_permission_name = 'auth_permission' 
+ 869          settings.table_event_name = 'auth_event' 
+ 870          settings.table_cas_name = 'auth_cas' 
+ 871   
+ 872          # ## if none, they will be created 
+ 873   
+ 874          settings.table_user = None 
+ 875          settings.table_group = None 
+ 876          settings.table_membership = None 
+ 877          settings.table_permission = None 
+ 878          settings.table_event = None 
+ 879          settings.table_cas = None 
+ 880   
+ 881          # ## 
+ 882   
+ 883          settings.showid = False 
+ 884   
+ 885          # ## these should be functions or lambdas 
+ 886   
+ 887          settings.login_next = self.url('index') 
+ 888          settings.login_onvalidation = [] 
+ 889          settings.login_onaccept = [] 
+ 890          settings.login_methods = [self] 
+ 891          settings.login_form = self 
+ 892          settings.login_email_validate = True 
+ 893          settings.login_userfield = None 
+ 894   
+ 895          settings.logout_next = self.url('index') 
+ 896          settings.logout_onlogout = None 
+ 897   
+ 898          settings.register_next = self.url('index') 
+ 899          settings.register_onvalidation = [] 
+ 900          settings.register_onaccept = [] 
+ 901          settings.register_fields = None 
+ 902   
+ 903          settings.verify_email_next = self.url('user', args='login') 
+ 904          settings.verify_email_onaccept = [] 
+ 905   
+ 906          settings.profile_next = self.url('index') 
+ 907          settings.profile_onvalidation = [] 
+ 908          settings.profile_onaccept = [] 
+ 909          settings.profile_fields = None 
+ 910          settings.retrieve_username_next = self.url('index') 
+ 911          settings.retrieve_password_next = self.url('index') 
+ 912          settings.request_reset_password_next = self.url('user', args='login') 
+ 913          settings.reset_password_next = self.url('user', args='login') 
+ 914   
+ 915          settings.change_password_next = self.url('index') 
+ 916          settings.change_password_onvalidation = [] 
+ 917          settings.change_password_onaccept = [] 
+ 918   
+ 919          settings.retrieve_password_onvalidation = [] 
+ 920          settings.reset_password_onvalidation = [] 
+ 921   
+ 922          settings.hmac_key = None 
+ 923          settings.lock_keys = True 
+ 924   
+ 925   
+ 926          # ## these are messages that can be customized 
+ 927          messages = self.messages = Messages(current.T) 
+ 928          messages.login_button = 'Login' 
+ 929          messages.register_button = 'Register' 
+ 930          messages.password_reset_button = 'Request reset password' 
+ 931          messages.password_change_button = 'Change password' 
+ 932          messages.profile_save_button = 'Save profile' 
+ 933          messages.submit_button = 'Submit' 
+ 934          messages.verify_password = 'Verify Password' 
+ 935          messages.delete_label = 'Check to delete:' 
+ 936          messages.function_disabled = 'Function disabled' 
+ 937          messages.access_denied = 'Insufficient privileges' 
+ 938          messages.registration_verifying = 'Registration needs verification' 
+ 939          messages.registration_pending = 'Registration is pending approval' 
+ 940          messages.login_disabled = 'Login disabled by administrator' 
+ 941          messages.logged_in = 'Logged in' 
+ 942          messages.email_sent = 'Email sent' 
+ 943          messages.unable_to_send_email = 'Unable to send email' 
+ 944          messages.email_verified = 'Email verified' 
+ 945          messages.logged_out = 'Logged out' 
+ 946          messages.registration_successful = 'Registration successful' 
+ 947          messages.invalid_email = 'Invalid email' 
+ 948          messages.unable_send_email = 'Unable to send email' 
+ 949          messages.invalid_login = 'Invalid login' 
+ 950          messages.invalid_user = 'Invalid user' 
+ 951          messages.invalid_password = 'Invalid password' 
+ 952          messages.is_empty = "Cannot be empty" 
+ 953          messages.mismatched_password = "Password fields don't match" 
+ 954          messages.verify_email = \ 
+ 955              'Click on the link http://...verify_email/%(key)s to verify your email' 
+ 956          messages.verify_email_subject = 'Email verification' 
+ 957          messages.username_sent = 'Your username was emailed to you' 
+ 958          messages.new_password_sent = 'A new password was emailed to you' 
+ 959          messages.password_changed = 'Password changed' 
+ 960          messages.retrieve_username = 'Your username is: %(username)s' 
+ 961          messages.retrieve_username_subject = 'Username retrieve' 
+ 962          messages.retrieve_password = 'Your password is: %(password)s' 
+ 963          messages.retrieve_password_subject = 'Password retrieve' 
+ 964          messages.reset_password = \ 
+ 965              'Click on the link http://...reset_password/%(key)s to reset your password' 
+ 966          messages.reset_password_subject = 'Password reset' 
+ 967          messages.invalid_reset_password = 'Invalid reset password' 
+ 968          messages.profile_updated = 'Profile updated' 
+ 969          messages.new_password = 'New password' 
+ 970          messages.old_password = 'Old password' 
+ 971          messages.group_description = \ 
+ 972              'Group uniquely assigned to user %(id)s' 
+ 973   
+ 974          messages.register_log = 'User %(id)s Registered' 
+ 975          messages.login_log = 'User %(id)s Logged-in' 
+ 976          messages.login_failed_log = None 
+ 977          messages.logout_log = 'User %(id)s Logged-out' 
+ 978          messages.profile_log = 'User %(id)s Profile updated' 
+ 979          messages.verify_email_log = 'User %(id)s Verification email sent' 
+ 980          messages.retrieve_username_log = 'User %(id)s Username retrieved' 
+ 981          messages.retrieve_password_log = 'User %(id)s Password retrieved' 
+ 982          messages.reset_password_log = 'User %(id)s Password reset' 
+ 983          messages.change_password_log = 'User %(id)s Password changed' 
+ 984          messages.add_group_log = 'Group %(group_id)s created' 
+ 985          messages.del_group_log = 'Group %(group_id)s deleted' 
+ 986          messages.add_membership_log = None 
+ 987          messages.del_membership_log = None 
+ 988          messages.has_membership_log = None 
+ 989          messages.add_permission_log = None 
+ 990          messages.del_permission_log = None 
+ 991          messages.has_permission_log = None 
+ 992          messages.impersonate_log = 'User %(id)s is impersonating %(other_id)s' 
+ 993   
+ 994          messages.label_first_name = 'First name' 
+ 995          messages.label_last_name = 'Last name' 
+ 996          messages.label_username = 'Username' 
+ 997          messages.label_email = 'E-mail' 
+ 998          messages.label_password = 'Password' 
+ 999          messages.label_registration_key = 'Registration key' 
+1000          messages.label_reset_password_key = 'Reset Password key' 
+1001          messages.label_registration_id = 'Registration identifier' 
+1002          messages.label_role = 'Role' 
+1003          messages.label_description = 'Description' 
+1004          messages.label_user_id = 'User ID' 
+1005          messages.label_group_id = 'Group ID' 
+1006          messages.label_name = 'Name' 
+1007          messages.label_table_name = 'Table name' 
+1008          messages.label_record_id = 'Record ID' 
+1009          messages.label_time_stamp = 'Timestamp' 
+1010          messages.label_client_ip = 'Client IP' 
+1011          messages.label_origin = 'Origin' 
+1012          messages.label_remember_me = "Remember me (for 30 days)" 
+1013          messages['T'] = current.T 
+1014          messages.verify_password_comment = 'please input your password again' 
+1015          messages.lock_keys = True 
+1016   
+1017          # for "remember me" option 
+1018          response = current.response 
+1019          if auth  and  auth.remember: #when user wants to be logged in for longer 
+1020              response.cookies[response.session_id_name]["expires"] = \ 
+1021                  auth.expiration 
+1022   
+1023          def lazy_user (auth = self): return auth.user_id 
+1024          reference_user = 'reference %s' % settings.table_user_name 
+1025          def represent(id,record=None,s=settings): 
+1026              try: 
+1027                  user = s.table_user(id) 
+1028                  return '%(first_name)s %(last_name)s' % user 
+1029              except: return id 
+
    1030          self.signature = db.Table(self.db,'auth_signature', 
+1031                                    Field('is_active','boolean',default=True), 
+1032                                    Field('created_on','datetime', 
+1033                                          default=request.now, 
+1034                                          writable=False,readable=False), 
+1035                                    Field('created_by', 
+1036                                          reference_user, 
+1037                                          default=lazy_user,represent=represent, 
+1038                                          writable=False,readable=False, 
+1039                                          ), 
+1040                                    Field('modified_on','datetime', 
+1041                                          update=request.now,default=request.now, 
+1042                                          writable=False,readable=False), 
+1043                                    Field('modified_by', 
+1044                                          reference_user,represent=represent, 
+1045                                          default=lazy_user,update=lazy_user, 
+1046                                          writable=False,readable=False)) 
+
    1047   
+1048   
+1049   
+
    1050 -    def _get_user_id(self): 
+
    1051         "accessor for auth.user_id" 
+1052         return self.user and self.user.id or None 
+
    1053      user_id = property(_get_user_id, doc="user.id or None") 
+1054   
+
    1055 -    def _HTTP(self, *a, **b): 
+
    1056          """ 
+1057          only used in lambda: self._HTTP(404) 
+1058          """ 
+1059   
+1060          raise HTTP(*a, **b) 
+
    1061   
+
    1062 -    def __call__(self): 
+
    1063          """ 
+1064          usage: 
+1065   
+1066          def authentication(): return dict(form=auth()) 
+1067          """ 
+1068   
+1069          request = current.request 
+1070          args = request.args 
+1071          if not args: 
+1072              redirect(self.url(args='login',vars=request.vars)) 
+1073          elif args[0] in self.settings.actions_disabled: 
+1074              raise HTTP(404) 
+1075          if args[0] in ('login','logout','register','verify_email', 
+1076                         'retrieve_username','retrieve_password', 
+1077                         'reset_password','request_reset_password', 
+1078                         'change_password','profile','groups', 
+1079                         'impersonate','not_authorized'): 
+1080              return getattr(self,args[0])() 
+1081          elif args[0]=='cas' and not self.settings.cas_provider: 
+1082              if args(1) == 'login': return self.cas_login(version=2) 
+1083              if args(1) == 'validate': return self.cas_validate(version=2) 
+1084              if args(1) == 'logout': return self.logout() 
+1085          else: 
+1086              raise HTTP(404) 
+
    1087   
+
    1088 -    def navbar(self,prefix='Welcome',action=None): 
+
    1089          request = current.request 
+1090          T = current.T 
+1091          if isinstance(prefix,str): 
+1092              prefix = T(prefix) 
+1093          if not action: 
+1094              action=URL(request.application,request.controller,'user') 
+1095          if prefix: 
+1096              prefix = prefix.strip()+' ' 
+1097          if self.user_id: 
+1098              logout=A(T('logout'),_href=action+'/logout') 
+1099              profile=A(T('profile'),_href=action+'/profile') 
+1100              password=A(T('password'),_href=action+'/change_password') 
+1101              bar = SPAN(prefix,self.user.first_name,' [ ', logout, ']',_class='auth_navbar') 
+1102              if not 'profile' in self.settings.actions_disabled: 
+1103                  bar.insert(4, ' | ') 
+1104                  bar.insert(5, profile) 
+1105              if not 'change_password' in self.settings.actions_disabled: 
+1106                  bar.insert(-1, ' | ') 
+1107                  bar.insert(-1, password) 
+1108          else: 
+1109              login=A(T('login'),_href=action+'/login') 
+1110              register=A(T('register'),_href=action+'/register') 
+1111              retrieve_username=A(T('forgot username?'), 
+1112                              _href=action+'/retrieve_username') 
+1113              lost_password=A(T('lost password?'), 
+1114                              _href=action+'/request_reset_password') 
+1115              bar = SPAN('[ ',login,' ]',_class='auth_navbar') 
+1116   
+1117              if not 'register' in self.settings.actions_disabled: 
+1118                  bar.insert(2, ' | ') 
+1119                  bar.insert(3, register) 
+1120              if 'username' in self.settings.table_user.fields() and \ 
+1121                      not 'retrieve_username' in self.settings.actions_disabled: 
+1122                  bar.insert(-1, ' | ') 
+1123                  bar.insert(-1, retrieve_username) 
+1124              if not 'request_reset_password' in self.settings.actions_disabled: 
+1125                  bar.insert(-1, ' | ') 
+1126                  bar.insert(-1, lost_password) 
+1127          return bar 
+
    1128   
+
    1129 -    def __get_migrate(self, tablename, migrate=True): 
+
    1130   
+1131          if type(migrate).__name__ == 'str': 
+1132              return (migrate + tablename + '.table') 
+1133          elif migrate == False: 
+1134              return False 
+1135          else: 
+1136              return True 
+
    1137   
+
    1138 -    def define_tables(self, username=False, migrate=True, fake_migrate=False): 
+
    1139          """ 
+1140          to be called unless tables are defined manually 
+1141   
+1142          usages:: 
+1143   
+1144              # defines all needed tables and table files 
+1145              # 'myprefix_auth_user.table', ... 
+1146              auth.define_tables(migrate='myprefix_') 
+1147   
+1148              # defines all needed tables without migration/table files 
+1149              auth.define_tables(migrate=False) 
+1150   
+1151          """ 
+1152   
+1153          db = self.db 
+1154          settings = self.settings 
+1155          if not settings.table_user_name in db.tables: 
+1156              passfield = settings.password_field 
+1157              if username or settings.cas_provider: 
+1158                  table = db.define_table( 
+1159                      settings.table_user_name, 
+1160                      Field('first_name', length=128, default='', 
+1161                            label=self.messages.label_first_name), 
+1162                      Field('last_name', length=128, default='', 
+1163                            label=self.messages.label_last_name), 
+1164                      Field('username', length=128, default='', 
+1165                            label=self.messages.label_username), 
+1166                      Field('email', length=512, default='', 
+1167                            label=self.messages.label_email), 
+1168                      Field(passfield, 'password', length=512, 
+1169                            readable=False, label=self.messages.label_password), 
+1170                      Field('registration_key', length=512, 
+1171                            writable=False, readable=False, default='', 
+1172                            label=self.messages.label_registration_key), 
+1173                      Field('reset_password_key', length=512, 
+1174                            writable=False, readable=False, default='', 
+1175                            label=self.messages.label_reset_password_key), 
+1176                      Field('registration_id', length=512, 
+1177                            writable=False, readable=False, default='', 
+1178                            label=self.messages.label_registration_id), 
+1179                      *settings.extra_fields.get(settings.table_user_name,[]), 
+1180                      **dict( 
+1181                          migrate=self.__get_migrate(settings.table_user_name, 
+1182                                                     migrate), 
+1183                          fake_migrate=fake_migrate, 
+1184                          format='%(username)s')) 
+1185                  table.username.requires = (IS_MATCH('[\w\.\-]+'), 
+1186                                             IS_NOT_IN_DB(db, table.username)) 
+1187              else: 
+1188                  table = db.define_table( 
+1189                      settings.table_user_name, 
+1190                      Field('first_name', length=128, default='', 
+1191                            label=self.messages.label_first_name), 
+1192                      Field('last_name', length=128, default='', 
+1193                            label=self.messages.label_last_name), 
+1194                      Field('email', length=512, default='', 
+1195                            label=self.messages.label_email), 
+1196                      Field(passfield, 'password', length=512, 
+1197                            readable=False, label=self.messages.label_password), 
+1198                      Field('registration_key', length=512, 
+1199                            writable=False, readable=False, default='', 
+1200                            label=self.messages.label_registration_key), 
+1201                      Field('reset_password_key', length=512, 
+1202                            writable=False, readable=False, default='', 
+1203                            label=self.messages.label_reset_password_key), 
+1204                      *settings.extra_fields.get(settings.table_user_name,[]), 
+1205                      **dict( 
+1206                          migrate=self.__get_migrate(settings.table_user_name, 
+1207                                                     migrate), 
+1208                          fake_migrate=fake_migrate, 
+1209                          format='%(first_name)s %(last_name)s (%(id)s)')) 
+1210              table.first_name.requires = \ 
+1211                  IS_NOT_EMPTY(error_message=self.messages.is_empty) 
+1212              table.last_name.requires = \ 
+1213                  IS_NOT_EMPTY(error_message=self.messages.is_empty) 
+1214              table[passfield].requires = [CRYPT(key=settings.hmac_key)] 
+1215              table.email.requires = \ 
+1216                  [IS_EMAIL(error_message=self.messages.invalid_email), 
+1217                   IS_NOT_IN_DB(db, table.email)] 
+1218              table.registration_key.default = '' 
+1219          settings.table_user = db[settings.table_user_name] 
+1220          if not settings.table_group_name in db.tables: 
+1221              table = db.define_table( 
+1222                  settings.table_group_name, 
+1223                  Field('role', length=512, default='', 
+1224                          label=self.messages.label_role), 
+1225                  Field('description', 'text', 
+1226                          label=self.messages.label_description), 
+1227                  *settings.extra_fields.get(settings.table_group_name,[]), 
+1228                  **dict( 
+1229                      migrate=self.__get_migrate( 
+1230                          settings.table_group_name, migrate), 
+1231                      fake_migrate=fake_migrate, 
+1232                      format = '%(role)s (%(id)s)')) 
+1233              table.role.requires = IS_NOT_IN_DB(db, '%s.role' 
+1234                   % settings.table_group_name) 
+1235          settings.table_group = db[settings.table_group_name] 
+1236          if not settings.table_membership_name in db.tables: 
+1237              table = db.define_table( 
+1238                  settings.table_membership_name, 
+1239                  Field('user_id', settings.table_user, 
+1240                          label=self.messages.label_user_id), 
+1241                  Field('group_id', settings.table_group, 
+1242                          label=self.messages.label_group_id), 
+1243                  *settings.extra_fields.get(settings.table_membership_name,[]), 
+1244                  **dict( 
+1245                      migrate=self.__get_migrate( 
+1246                          settings.table_membership_name, migrate), 
+1247                      fake_migrate=fake_migrate)) 
+1248              table.user_id.requires = IS_IN_DB(db, '%s.id' % 
+1249                      settings.table_user_name, 
+1250                      '%(first_name)s %(last_name)s (%(id)s)') 
+1251              table.group_id.requires = IS_IN_DB(db, '%s.id' % 
+1252                      settings.table_group_name, 
+1253                      '%(role)s (%(id)s)') 
+1254          settings.table_membership = db[settings.table_membership_name] 
+1255          if not settings.table_permission_name in db.tables: 
+1256              table = db.define_table( 
+1257                  settings.table_permission_name, 
+1258                  Field('group_id', settings.table_group, 
+1259                          label=self.messages.label_group_id), 
+1260                  Field('name', default='default', length=512, 
+1261                          label=self.messages.label_name), 
+1262                  Field('table_name', length=512, 
+1263                          label=self.messages.label_table_name), 
+1264                  Field('record_id', 'integer',default=0, 
+1265                          label=self.messages.label_record_id), 
+1266                  *settings.extra_fields.get(settings.table_permission_name,[]), 
+1267                  **dict( 
+1268                      migrate=self.__get_migrate( 
+1269                          settings.table_permission_name, migrate), 
+1270                      fake_migrate=fake_migrate)) 
+1271              table.group_id.requires = IS_IN_DB(db, '%s.id' % 
+1272                      settings.table_group_name, 
+1273                      '%(role)s (%(id)s)') 
+1274              table.name.requires = IS_NOT_EMPTY(error_message=self.messages.is_empty) 
+1275              table.table_name.requires = IS_EMPTY_OR(IS_IN_SET(self.db.tables)) 
+1276              table.record_id.requires = IS_INT_IN_RANGE(0, 10 ** 9) 
+1277          settings.table_permission = db[settings.table_permission_name] 
+1278          if not settings.table_event_name in db.tables: 
+1279              table  = db.define_table( 
+1280                  settings.table_event_name, 
+1281                  Field('time_stamp', 'datetime', 
+1282                          default=current.request.now, 
+1283                          label=self.messages.label_time_stamp), 
+1284                  Field('client_ip', 
+1285                          default=current.request.client, 
+1286                          label=self.messages.label_client_ip), 
+1287                  Field('user_id', settings.table_user, default=None, 
+1288                          label=self.messages.label_user_id), 
+1289                  Field('origin', default='auth', length=512, 
+1290                          label=self.messages.label_origin), 
+1291                  Field('description', 'text', default='', 
+1292                          label=self.messages.label_description), 
+1293                  *settings.extra_fields.get(settings.table_event_name,[]), 
+1294                  **dict( 
+1295                      migrate=self.__get_migrate( 
+1296                          settings.table_event_name, migrate), 
+1297                      fake_migrate=fake_migrate)) 
+1298              table.user_id.requires = IS_IN_DB(db, '%s.id' % 
+1299                      settings.table_user_name, 
+1300                      '%(first_name)s %(last_name)s (%(id)s)') 
+1301              table.origin.requires = IS_NOT_EMPTY(error_message=self.messages.is_empty) 
+1302              table.description.requires = IS_NOT_EMPTY(error_message=self.messages.is_empty) 
+1303          settings.table_event = db[settings.table_event_name] 
+1304          now = current.request.now 
+1305          if settings.cas_domains: 
+1306              if not settings.table_cas_name in db.tables: 
+1307                  table  = db.define_table( 
+1308                      settings.table_cas_name, 
+1309                      Field('user_id', settings.table_user, default=None, 
+1310                            label=self.messages.label_user_id), 
+1311                      Field('created_on','datetime',default=now), 
+1312                      Field('url',requires=IS_URL()), 
+1313                      Field('uuid'), 
+1314                      *settings.extra_fields.get(settings.table_cas_name,[]), 
+1315                      **dict( 
+1316                          migrate=self.__get_migrate( 
+1317                              settings.table_event_name, migrate), 
+1318                          fake_migrate=fake_migrate)) 
+1319                  table.user_id.requires = IS_IN_DB(db, '%s.id' % \ 
+1320                      settings.table_user_name, 
+1321                      '%(first_name)s %(last_name)s (%(id)s)') 
+1322              settings.table_cas = db[settings.table_cas_name] 
+1323          if settings.cas_provider: 
+1324              settings.actions_disabled = \ 
+1325                  ['profile','register','change_password','request_reset_password'] 
+1326              from gluon.contrib.login_methods.cas_auth import CasAuth 
+1327              maps = dict((name,lambda v,n=name:v.get(n,None)) for name in \ 
+1328                              settings.table_user.fields if name!='id' \ 
+1329                              and settings.table_user[name].readable) 
+1330              maps['registration_id'] = \ 
+1331                  lambda v,p=settings.cas_provider:'%s/%s' % (p,v['user']) 
+1332              settings.login_form = CasAuth( 
+1333                  casversion = 2, 
+1334                  urlbase = settings.cas_provider, 
+1335                  actions=['login','validate','logout'], 
+1336                  maps=maps) 
+
    1337   
+1338   
+
    1339 -    def log_event(self, description, origin='auth'): 
+
    1340          """ 
+1341          usage:: 
+1342   
+1343              auth.log_event(description='this happened', origin='auth') 
+1344          """ 
+1345   
+1346          if self.is_logged_in(): 
+1347              user_id = self.user.id 
+1348          else: 
+1349              user_id = None  # user unknown 
+1350          self.settings.table_event.insert(description=description, 
+1351                                           origin=origin, user_id=user_id) 
+
    1352   
+
    1353 -    def get_or_create_user(self, keys): 
+
    1354          """ 
+1355          Used for alternate login methods: 
+1356              If the user exists already then password is updated. 
+1357              If the user doesn't yet exist, then they are created. 
+1358          """ 
+1359          table_user = self.settings.table_user 
+1360          if 'registration_id' in table_user.fields() and \ 
+1361                  'registration_id' in keys: 
+1362              username = 'registration_id' 
+1363          elif 'username' in table_user.fields(): 
+1364              username = 'username' 
+1365          elif 'email' in table_user.fields(): 
+1366              username = 'email' 
+1367          else: 
+1368              raise SyntaxError, "user must have username or email" 
+1369          passfield = self.settings.password_field 
+1370          user = self.db(table_user[username] == keys[username]).select().first() 
+1371          keys['registration_key']='' 
+1372          if user: 
+1373              user.update_record(**table_user._filter_fields(keys)) 
+1374          else: 
+1375              if not 'first_name' in keys and 'first_name' in table_user.fields: 
+1376                  keys['first_name'] = keys[username] 
+1377              user_id = table_user.insert(**table_user._filter_fields(keys)) 
+1378              user =  self.user = table_user[user_id] 
+1379              if self.settings.create_user_groups: 
+1380                  group_id = self.add_group("user_%s" % user_id) 
+1381                  self.add_membership(group_id, user_id) 
+1382          return user 
+
    1383   
+
    1384 -    def basic(self): 
+
    1385          if not self.settings.allow_basic_login: 
+1386              return False 
+1387          basic = current.request.env.http_authorization 
+1388          if not basic or not basic[:6].lower() == 'basic ': 
+1389              return False 
+1390          (username, password) = base64.b64decode(basic[6:]).split(':') 
+1391          return self.login_bare(username, password) 
+
    1392   
+
    1393 -    def login_bare(self, username, password): 
+
    1394          """ 
+1395          logins user 
+1396          """ 
+1397   
+1398          request = current.request 
+1399          session = current.session 
+1400          table_user = self.settings.table_user 
+1401          if self.settings.login_userfield: 
+1402              userfield = self.settings.login_userfield 
+1403          elif 'username' in table_user.fields: 
+1404              userfield = 'username' 
+1405          else: 
+1406              userfield = 'email' 
+1407          passfield = self.settings.password_field 
+1408          user = self.db(table_user[userfield] == username).select().first() 
+1409          password = table_user[passfield].validate(password)[0] 
+1410          if user: 
+1411              if not user.registration_key and user[passfield] == password: 
+1412                  user = Storage(table_user._filter_fields(user, id=True)) 
+1413                  session.auth = Storage(user=user, last_visit=request.now, 
+1414                                         expiration=self.settings.expiration, 
+1415                                         hmac_key = web2py_uuid()) 
+1416                  self.user = user 
+1417                  return user 
+1418          return False 
+
    1419   
+
    1420 -    def cas_login( 
+1421          self, 
+1422          next=DEFAULT, 
+1423          onvalidation=DEFAULT, 
+1424          onaccept=DEFAULT, 
+1425          log=DEFAULT, 
+1426          version=2, 
+1427          ): 
+
    1428          request, session = current.request, current.session 
+1429          db, table = self.db, self.settings.table_cas 
+1430          session._cas_service = request.vars.service or session._cas_service 
+1431          if not request.env.http_host in self.settings.cas_domains or \ 
+1432                  not session._cas_service: 
+1433              raise HTTP(403,'not authorized') 
+1434          def allow_access(): 
+1435              row = table(url=session._cas_service,user_id=self.user.id) 
+1436              if row: 
+1437                  row.update_record(created_on=request.now) 
+1438                  uuid = row.uuid 
+1439              else: 
+1440                  uuid = web2py_uuid() 
+1441                  table.insert(url=session._cas_service, user_id=self.user.id, 
+1442                               uuid=uuid, created_on=request.now) 
+1443              url = session._cas_service 
+1444              del session._cas_service 
+1445              redirect(url+"?ticket="+uuid) 
+
    1446          if self.is_logged_in(): 
+1447              allow_access() 
+1448          def cas_onaccept(form, onaccept=onaccept): 
+1449              if onaccept!=DEFAULT: onaccept(form) 
+1450              allow_access() 
+1451          return self.login(next,onvalidation,cas_onaccept,log) 
+1452   
+1453   
+
    1454 -    def cas_validate(self,version=2): 
+
    1455          request = current.request 
+1456          db, table = self.db, self.settings.table_cas 
+1457          current.response.headers['Content-Type']='text' 
+1458          ticket = table(uuid=request.vars.ticket) 
+1459          url = request.env.path_info.rsplit('/',1)[0] 
+1460          if ticket: # and ticket.created_on>request.now-datetime.timedelta(60): 
+1461              user = self.settings.table_user(ticket.user_id) 
+1462              fullname = user.first_name+' '+user.last_name 
+1463              if version==1: 
+1464                  raise HTTP(200,'yes\n%s:%s:%s'%(user.id,user.email,fullname)) 
+1465              # assume version 2 
+1466              username = user.get('username',user.email) 
+1467              raise HTTP(200,'<?xml version="1.0" encoding="UTF-8"?>\n'+\ 
+1468                             TAG['cas:serviceResponse']( 
+1469                      TAG['cas:authenticationSuccess']( 
+1470                          TAG['cas:user'](username), 
+1471                          *[TAG['cas:'+field.name](user[field.name]) \ 
+1472                                for field in self.settings.table_user \ 
+1473                                if field.readable]), 
+1474                      **{'_xmlns:cas':'http://www.yale.edu/tp/cas'}).xml()) 
+1475          if version==1: 
+1476              raise HTTP(200,'no\n') 
+1477          # assume version 2 
+1478          raise HTTP(200,'<?xml version="1.0" encoding="UTF-8"?>\n'+\ 
+1479                         TAG['cas:serviceResponse']( 
+1480                  TAG['cas:authenticationFailure']( 
+1481                      'Ticket %s not recognized' % ticket, 
+1482                      _code='INVALID TICKET'), 
+1483                  **{'_xmlns:cas':'http://www.yale.edu/tp/cas'}).xml()) 
+
    1484   
+1485   
+
    1486 -    def login( 
+1487          self, 
+1488          next=DEFAULT, 
+1489          onvalidation=DEFAULT, 
+1490          onaccept=DEFAULT, 
+1491          log=DEFAULT, 
+1492          ): 
+
    1493          """ 
+1494          returns a login form 
+1495   
+1496          .. method:: Auth.login([next=DEFAULT [, onvalidation=DEFAULT 
+1497              [, onaccept=DEFAULT [, log=DEFAULT]]]]) 
+1498   
+1499          """ 
+1500   
+1501          table_user = self.settings.table_user 
+1502          if self.settings.login_userfield: 
+1503              username = self.settings.login_userfield 
+1504          elif 'username' in table_user.fields: 
+1505              username = 'username' 
+1506          else: 
+1507              username = 'email' 
+1508          if 'username' in table_user.fields or not self.settings.login_email_validate: 
+1509              tmpvalidator = IS_NOT_EMPTY(error_message=self.messages.is_empty) 
+1510          else: 
+1511              tmpvalidator = IS_EMAIL(error_message=self.messages.invalid_email) 
+1512          old_requires = table_user[username].requires 
+1513          table_user[username].requires = tmpvalidator 
+1514   
+1515          request = current.request 
+1516          response = current.response 
+1517          session = current.session 
+1518   
+1519          passfield = self.settings.password_field 
+1520          if next == DEFAULT: 
+1521              next = request.get_vars._next \ 
+1522                  or request.post_vars._next \ 
+1523                  or self.settings.login_next 
+1524          if onvalidation == DEFAULT: 
+1525              onvalidation = self.settings.login_onvalidation 
+1526          if onaccept == DEFAULT: 
+1527              onaccept = self.settings.login_onaccept 
+1528          if log == DEFAULT: 
+1529              log = self.messages.login_log 
+1530   
+1531          user = None # default 
+1532   
+1533          # do we use our own login form, or from a central source? 
+1534          if self.settings.login_form == self: 
+1535              form = SQLFORM( 
+1536                  table_user, 
+1537                  fields=[username, passfield], 
+1538                  hidden=dict(_next=next), 
+1539                  showid=self.settings.showid, 
+1540                  submit_button=self.messages.login_button, 
+1541                  delete_label=self.messages.delete_label, 
+1542                  formstyle=self.settings.formstyle, 
+1543                  separator=self.settings.label_separator 
+1544                  ) 
+1545   
+1546              if self.settings.remember_me_form: 
+1547                  ## adds a new input checkbox "remember me for longer" 
+1548                  addrow(form,XML("&nbsp;"), 
+1549                         DIV(XML("&nbsp;"), 
+1550                             INPUT(_type='checkbox', 
+1551                                   _class='checkbox', 
+1552                                   _id="auth_user_remember", 
+1553                                   _name="remember", 
+1554                                   ), 
+1555                             XML("&nbsp;&nbsp;"), 
+1556                             LABEL( 
+1557                              self.messages.label_remember_me, 
+1558                              _for="auth_user_remember", 
+1559                              )),"", 
+1560                         self.settings.formstyle, 
+1561                         'auth_user_remember__row') 
+1562   
+1563              captcha = self.settings.login_captcha or \ 
+1564                  (self.settings.login_captcha!=False and self.settings.captcha) 
+1565              if captcha: 
+1566                  addrow(form, captcha.label, captcha, captcha.comment, self.settings.formstyle,'captcha__row') 
+1567              accepted_form = False 
+1568   
+1569              if form.accepts(request, session, 
+1570                              formname='login', dbio=False, 
+1571                              onvalidation=onvalidation, 
+1572                              hideerror=self.settings.hideerror): 
+1573   
+1574                  accepted_form = True 
+1575                  # check for username in db 
+1576                  user = self.db(table_user[username] == form.vars[username]).select().first() 
+1577                  if user: 
+1578                      # user in db, check if registration pending or disabled 
+1579                      temp_user = user 
+1580                      if temp_user.registration_key == 'pending': 
+1581                          response.flash = self.messages.registration_pending 
+1582                          return form 
+1583                      elif temp_user.registration_key in ('disabled','blocked'): 
+1584                          response.flash = self.messages.login_disabled 
+1585                          return form 
+1586                      elif temp_user.registration_key!=None and \ 
+1587                              temp_user.registration_key.strip(): 
+1588                          response.flash = \ 
+1589                              self.messages.registration_verifying 
+1590                          return form 
+1591                      # try alternate logins 1st as these have the 
+1592                      # current version of the password 
+1593                      user = None 
+1594                      for login_method in self.settings.login_methods: 
+1595                          if login_method != self and \ 
+1596                                  login_method(request.vars[username], 
+1597                                               request.vars[passfield]): 
+1598                              if not self in self.settings.login_methods: 
+1599                                  # do not store password in db 
+1600                                  form.vars[passfield] = None 
+1601                              user = self.get_or_create_user(form.vars) 
+1602                              break 
+1603                      if not user: 
+1604                          # alternates have failed, maybe because service inaccessible 
+1605                          if self.settings.login_methods[0] == self: 
+1606                              # try logging in locally using cached credentials 
+1607                              if temp_user[passfield] == form.vars.get(passfield, ''): 
+1608                                  # success 
+1609                                  user = temp_user 
+1610                  else: 
+1611                      # user not in db 
+1612                      if not self.settings.alternate_requires_registration: 
+1613                          # we're allowed to auto-register users from external systems 
+1614                          for login_method in self.settings.login_methods: 
+1615                              if login_method != self and \ 
+1616                                      login_method(request.vars[username], 
+1617                                                   request.vars[passfield]): 
+1618                                  if not self in self.settings.login_methods: 
+1619                                      # do not store password in db 
+1620                                      form.vars[passfield] = None 
+1621                                  user = self.get_or_create_user(form.vars) 
+1622                                  break 
+1623                  if not user: 
+1624                      if self.settings.login_failed_log: 
+1625                          self.log_event(self.settings.login_failed_log % request.post_vars) 
+1626                      # invalid login 
+1627                      session.flash = self.messages.invalid_login 
+1628                      redirect(self.url(args=request.args,vars=request.get_vars)) 
+1629   
+1630          else: 
+1631              # use a central authentication server 
+1632              cas = self.settings.login_form 
+1633              cas_user = cas.get_user() 
+1634   
+1635              if cas_user: 
+1636                  cas_user[passfield] = None 
+1637                  user = self.get_or_create_user(table_user._filter_fields(cas_user)) 
+1638              elif hasattr(cas,'login_form'): 
+1639                  return cas.login_form() 
+1640              else: 
+1641                  # we need to pass through login again before going on 
+1642                  next = self.url('user',args='login',vars=dict(_next=next)) 
+1643                  redirect(cas.login_url(next)) 
+1644   
+1645   
+1646          # process authenticated users 
+1647          if user: 
+1648              user = Storage(table_user._filter_fields(user, id=True)) 
+1649   
+1650              if log: 
+1651                  self.log_event(log % user) 
+1652   
+1653          # process authenticated users 
+1654              # user wants to be logged in for longer 
+1655              session.auth = Storage( 
+1656                  user = user, 
+1657                  last_visit = request.now, 
+1658                  expiration = self.settings.long_expiration, 
+1659                  remember = request.vars.has_key("remember"), 
+1660                  hmac_key = web2py_uuid() 
+1661                  ) 
+1662   
+1663              self.user = user 
+1664              session.flash = self.messages.logged_in 
+1665   
+1666          # how to continue 
+1667          if self.settings.login_form == self: 
+1668              if accepted_form: 
+1669                  callback(onaccept,form) 
+1670                  if isinstance(next, (list, tuple)): 
+1671                      # fix issue with 2.6 
+1672                      next = next[0] 
+1673                  if next and not next[0] == '/' and next[:4] != 'http': 
+1674                      next = self.url(next.replace('[id]', str(form.vars.id))) 
+1675                  redirect(next) 
+1676              table_user[username].requires = old_requires 
+1677              return form 
+1678          elif user: 
+1679              callback(onaccept,None) 
+1680          redirect(next) 
+
    1681   
+
    1682 -    def logout(self, next=DEFAULT, onlogout=DEFAULT, log=DEFAULT): 
+
    1683          """ 
+1684          logout and redirects to login 
+1685   
+1686          .. method:: Auth.logout ([next=DEFAULT[, onlogout=DEFAULT[, 
+1687              log=DEFAULT]]]) 
+1688   
+1689          """ 
+1690   
+1691          if next == DEFAULT: 
+1692              next = self.settings.logout_next 
+1693          if onlogout == DEFAULT: 
+1694              onlogout = self.settings.logout_onlogout 
+1695          if onlogout: 
+1696              onlogout(self.user) 
+1697          if log == DEFAULT: 
+1698              log = self.messages.logout_log 
+1699          if log and self.user: 
+1700              self.log_event(log % self.user) 
+1701   
+1702          if self.settings.login_form != self: 
+1703              cas = self.settings.login_form 
+1704              cas_user = cas.get_user() 
+1705              if cas_user: 
+1706                  next = cas.logout_url(next) 
+1707   
+1708          current.session.auth = None 
+1709          current.session.flash = self.messages.logged_out 
+1710          if next: 
+1711              redirect(next) 
+
    1712   
+
    1713 -    def register( 
+1714          self, 
+1715          next=DEFAULT, 
+1716          onvalidation=DEFAULT, 
+1717          onaccept=DEFAULT, 
+1718          log=DEFAULT, 
+1719          ): 
+
    1720          """ 
+1721          returns a registration form 
+1722   
+1723          .. method:: Auth.register([next=DEFAULT [, onvalidation=DEFAULT 
+1724              [, onaccept=DEFAULT [, log=DEFAULT]]]]) 
+1725   
+1726          """ 
+1727   
+1728          table_user = self.settings.table_user 
+1729          request = current.request 
+1730          response = current.response 
+1731          session = current.session 
+1732          if self.is_logged_in(): 
+1733              redirect(self.settings.logged_url) 
+1734          if next == DEFAULT: 
+1735              next = request.get_vars._next \ 
+1736                  or request.post_vars._next \ 
+1737                  or self.settings.register_next 
+1738          if onvalidation == DEFAULT: 
+1739              onvalidation = self.settings.register_onvalidation 
+1740          if onaccept == DEFAULT: 
+1741              onaccept = self.settings.register_onaccept 
+1742          if log == DEFAULT: 
+1743              log = self.messages.register_log 
+1744   
+1745          passfield = self.settings.password_field 
+1746          formstyle = self.settings.formstyle 
+1747          form = SQLFORM(table_user, 
+1748                         fields = self.settings.register_fields, 
+1749                         hidden=dict(_next=next), 
+1750                         showid=self.settings.showid, 
+1751                         submit_button=self.messages.register_button, 
+1752                         delete_label=self.messages.delete_label, 
+1753                         formstyle=formstyle, 
+1754                         separator=self.settings.label_separator 
+1755                         ) 
+1756          for i, row in enumerate(form[0].components): 
+1757              item = row.element('input',_name=passfield) 
+1758              if item: 
+1759                  form.custom.widget.password_two = \ 
+1760                      INPUT(_name="password_two",  _type="password", 
+1761                            requires=IS_EXPR('value==%s' % \ 
+1762                            repr(request.vars.get(passfield, None)), 
+1763                            error_message=self.messages.mismatched_password)) 
+1764   
+1765                  addrow(form, self.messages.verify_password + ':', 
+1766                         form.custom.widget.password_two, 
+1767                         self.messages.verify_password_comment, 
+1768                         formstyle, 
+1769                         '%s_%s__row' % (table_user, 'password_two'), 
+1770                         position=i+1) 
+1771                  break 
+1772          captcha = self.settings.register_captcha or self.settings.captcha 
+1773          if captcha: 
+1774              addrow(form, captcha.label, captcha, captcha.comment,self.settings.formstyle, 'captcha__row') 
+1775   
+1776          table_user.registration_key.default = key = web2py_uuid() 
+1777          if form.accepts(request, session, formname='register', 
+1778                          onvalidation=onvalidation,hideerror=self.settings.hideerror): 
+1779              description = self.messages.group_description % form.vars 
+1780              if self.settings.create_user_groups: 
+1781                  group_id = self.add_group("user_%s" % form.vars.id, description) 
+1782                  self.add_membership(group_id, form.vars.id) 
+1783              if self.settings.registration_requires_verification: 
+1784                  if not self.settings.mailer or \ 
+1785                     not self.settings.mailer.send(to=form.vars.email, 
+1786                          subject=self.messages.verify_email_subject, 
+1787                          message=self.messages.verify_email 
+1788                           % dict(key=key)): 
+1789                      self.db.rollback() 
+1790                      response.flash = self.messages.unable_send_email 
+1791                      return form 
+1792                  session.flash = self.messages.email_sent 
+1793              elif self.settings.registration_requires_approval: 
+1794                  table_user[form.vars.id] = dict(registration_key='pending') 
+1795                  session.flash = self.messages.registration_pending 
+1796              else: 
+1797                  table_user[form.vars.id] = dict(registration_key='') 
+1798                  session.flash = self.messages.registration_successful 
+1799                  table_user = self.settings.table_user 
+1800                  if 'username' in table_user.fields: 
+1801                      username = 'username' 
+1802                  else: 
+1803                      username = 'email' 
+1804                  user = self.db(table_user[username] == form.vars[username]).select().first() 
+1805                  user = Storage(table_user._filter_fields(user, id=True)) 
+1806                  session.auth = Storage(user=user, last_visit=request.now, 
+1807                                         expiration=self.settings.expiration, 
+1808                                         hmac_key = web2py_uuid()) 
+1809                  self.user = user 
+1810                  session.flash = self.messages.logged_in 
+1811              if log: 
+1812                  self.log_event(log % form.vars) 
+1813              callback(onaccept,form) 
+1814              if not next: 
+1815                  next = self.url(args = request.args) 
+1816              elif isinstance(next, (list, tuple)): ### fix issue with 2.6 
+1817                  next = next[0] 
+1818              elif next and not next[0] == '/' and next[:4] != 'http': 
+1819                  next = self.url(next.replace('[id]', str(form.vars.id))) 
+1820              redirect(next) 
+1821          return form 
+
    1822   
+
    1823 -    def is_logged_in(self): 
+
    1824          """ 
+1825          checks if the user is logged in and returns True/False. 
+1826          if so user is in auth.user as well as in session.auth.user 
+1827          """ 
+1828   
+1829          if self.user: 
+1830              return True 
+1831          return False 
+
    1832   
+
    1833 -    def verify_email( 
+1834          self, 
+1835          next=DEFAULT, 
+1836          onaccept=DEFAULT, 
+1837          log=DEFAULT, 
+1838          ): 
+
    1839          """ 
+1840          action user to verify the registration email, XXXXXXXXXXXXXXXX 
+1841   
+1842          .. method:: Auth.verify_email([next=DEFAULT [, onvalidation=DEFAULT 
+1843              [, onaccept=DEFAULT [, log=DEFAULT]]]]) 
+1844   
+1845          """ 
+1846   
+1847          key = current.request.args[-1] 
+1848          table_user = self.settings.table_user 
+1849          user = self.db(table_user.registration_key == key).select().first() 
+1850          if not user: 
+1851              redirect(self.settings.login_url) 
+1852          if self.settings.registration_requires_approval: 
+1853              user.update_record(registration_key = 'pending') 
+1854              current.session.flash = self.messages.registration_pending 
+1855          else: 
+1856              user.update_record(registration_key = '') 
+1857              current.session.flash = self.messages.email_verified 
+1858          if log == DEFAULT: 
+1859              log = self.messages.verify_email_log 
+1860          if next == DEFAULT: 
+1861              next = self.settings.verify_email_next 
+1862          if onaccept == DEFAULT: 
+1863              onaccept = self.settings.verify_email_onaccept 
+1864          if log: 
+1865              self.log_event(log % user) 
+1866          callback(onaccept,user) 
+1867          redirect(next) 
+
    1868   
+
    1869 -    def retrieve_username( 
+1870          self, 
+1871          next=DEFAULT, 
+1872          onvalidation=DEFAULT, 
+1873          onaccept=DEFAULT, 
+1874          log=DEFAULT, 
+1875          ): 
+
    1876          """ 
+1877          returns a form to retrieve the user username 
+1878          (only if there is a username field) 
+1879   
+1880          .. method:: Auth.retrieve_username([next=DEFAULT 
+1881              [, onvalidation=DEFAULT [, onaccept=DEFAULT [, log=DEFAULT]]]]) 
+1882   
+1883          """ 
+1884   
+1885          table_user = self.settings.table_user 
+1886          if not 'username' in table_user.fields: 
+1887              raise HTTP(404) 
+1888          request = current.request 
+1889          response = current.response 
+1890          session = current.session 
+1891          captcha = self.settings.retrieve_username_captcha or \ 
+1892                  (self.settings.retrieve_username_captcha!=False and self.settings.captcha) 
+1893          if not self.settings.mailer: 
+1894              response.flash = self.messages.function_disabled 
+1895              return '' 
+1896          if next == DEFAULT: 
+1897              next = request.get_vars._next \ 
+1898                  or request.post_vars._next \ 
+1899                  or self.settings.retrieve_username_next 
+1900          if onvalidation == DEFAULT: 
+1901              onvalidation = self.settings.retrieve_username_onvalidation 
+1902          if onaccept == DEFAULT: 
+1903              onaccept = self.settings.retrieve_username_onaccept 
+1904          if log == DEFAULT: 
+1905              log = self.messages.retrieve_username_log 
+1906          old_requires = table_user.email.requires 
+1907          table_user.email.requires = [IS_IN_DB(self.db, table_user.email, 
+1908              error_message=self.messages.invalid_email)] 
+1909          form = SQLFORM(table_user, 
+1910                         fields=['email'], 
+1911                         hidden=dict(_next=next), 
+1912                         showid=self.settings.showid, 
+1913                         submit_button=self.messages.submit_button, 
+1914                         delete_label=self.messages.delete_label, 
+1915                         formstyle=self.settings.formstyle, 
+1916                         separator=self.settings.label_separator 
+1917                         ) 
+1918          if captcha: 
+1919              addrow(form, captcha.label, captcha, captcha.comment,self.settings.formstyle, 'captcha__row') 
+1920   
+1921          if form.accepts(request, session, 
+1922                          formname='retrieve_username', dbio=False, 
+1923                          onvalidation=onvalidation,hideerror=self.settings.hideerror): 
+1924              user = self.db(table_user.email == form.vars.email).select().first() 
+1925              if not user: 
+1926                  current.session.flash = \ 
+1927                      self.messages.invalid_email 
+1928                  redirect(self.url(args=request.args)) 
+1929              username = user.username 
+1930              self.settings.mailer.send(to=form.vars.email, 
+1931                      subject=self.messages.retrieve_username_subject, 
+1932                      message=self.messages.retrieve_username 
+1933                       % dict(username=username)) 
+1934              session.flash = self.messages.email_sent 
+1935              if log: 
+1936                  self.log_event(log % user) 
+1937              callback(onaccept,form) 
+1938              if not next: 
+1939                  next = self.url(args = request.args) 
+1940              elif isinstance(next, (list, tuple)): ### fix issue with 2.6 
+1941                  next = next[0] 
+1942              elif next and not next[0] == '/' and next[:4] != 'http': 
+1943                  next = self.url(next.replace('[id]', str(form.vars.id))) 
+1944              redirect(next) 
+1945          table_user.email.requires = old_requires 
+1946          return form 
+
    1947   
+
    1948 -    def random_password(self): 
+
    1949          import string 
+1950          import random 
+1951          password = '' 
+1952          specials=r'!#$*' 
+1953          for i in range(0,3): 
+1954              password += random.choice(string.lowercase) 
+1955              password += random.choice(string.uppercase) 
+1956              password += random.choice(string.digits) 
+1957              password += random.choice(specials) 
+1958          return ''.join(random.sample(password,len(password))) 
+
    1959   
+
    1960 -    def reset_password_deprecated( 
+1961          self, 
+1962          next=DEFAULT, 
+1963          onvalidation=DEFAULT, 
+1964          onaccept=DEFAULT, 
+1965          log=DEFAULT, 
+1966          ): 
+
    1967          """ 
+1968          returns a form to reset the user password (deprecated) 
+1969   
+1970          .. method:: Auth.reset_password_deprecated([next=DEFAULT 
+1971              [, onvalidation=DEFAULT [, onaccept=DEFAULT [, log=DEFAULT]]]]) 
+1972   
+1973          """ 
+1974   
+1975          table_user = self.settings.table_user 
+1976          request = current.request 
+1977          response = current.response 
+1978          session = current.session 
+1979          if not self.settings.mailer: 
+1980              response.flash = self.messages.function_disabled 
+1981              return '' 
+1982          if next == DEFAULT: 
+1983              next = request.get_vars._next \ 
+1984                  or request.post_vars._next \ 
+1985                  or self.settings.retrieve_password_next 
+1986          if onvalidation == DEFAULT: 
+1987              onvalidation = self.settings.retrieve_password_onvalidation 
+1988          if onaccept == DEFAULT: 
+1989              onaccept = self.settings.retrieve_password_onaccept 
+1990          if log == DEFAULT: 
+1991              log = self.messages.retrieve_password_log 
+1992          old_requires = table_user.email.requires 
+1993          table_user.email.requires = [IS_IN_DB(self.db, table_user.email, 
+1994              error_message=self.messages.invalid_email)] 
+1995          form = SQLFORM(table_user, 
+1996                         fields=['email'], 
+1997                         hidden=dict(_next=next), 
+1998                         showid=self.settings.showid, 
+1999                         submit_button=self.messages.submit_button, 
+2000                         delete_label=self.messages.delete_label, 
+2001                         formstyle=self.settings.formstyle, 
+2002                         separator=self.settings.label_separator 
+2003                         ) 
+2004          if form.accepts(request, session, 
+2005                          formname='retrieve_password', dbio=False, 
+2006                          onvalidation=onvalidation,hideerror=self.settings.hideerror): 
+2007              user = self.db(table_user.email == form.vars.email).select().first() 
+2008              if not user: 
+2009                  current.session.flash = \ 
+2010                      self.messages.invalid_email 
+2011                  redirect(self.url(args=request.args)) 
+2012              elif user.registration_key in ('pending','disabled','blocked'): 
+2013                  current.session.flash = \ 
+2014                      self.messages.registration_pending 
+2015                  redirect(self.url(args=request.args)) 
+2016              password = self.random_password() 
+2017              passfield = self.settings.password_field 
+2018              d = {passfield: table_user[passfield].validate(password)[0], 
+2019                   'registration_key': ''} 
+2020              user.update_record(**d) 
+2021              if self.settings.mailer and \ 
+2022                 self.settings.mailer.send(to=form.vars.email, 
+2023                          subject=self.messages.retrieve_password_subject, 
+2024                          message=self.messages.retrieve_password \ 
+2025                          % dict(password=password)): 
+2026                  session.flash = self.messages.email_sent 
+2027              else: 
+2028                  session.flash = self.messages.unable_to_send_email 
+2029              if log: 
+2030                  self.log_event(log % user) 
+2031              callback(onaccept,form) 
+2032              if not next: 
+2033                  next = self.url(args = request.args) 
+2034              elif isinstance(next, (list, tuple)): ### fix issue with 2.6 
+2035                  next = next[0] 
+2036              elif next and not next[0] == '/' and next[:4] != 'http': 
+2037                  next = self.url(next.replace('[id]', str(form.vars.id))) 
+2038              redirect(next) 
+2039          table_user.email.requires = old_requires 
+2040          return form 
+
    2041   
+
    2042 -    def reset_password( 
+2043          self, 
+2044          next=DEFAULT, 
+2045          onvalidation=DEFAULT, 
+2046          onaccept=DEFAULT, 
+2047          log=DEFAULT, 
+2048          ): 
+
    2049          """ 
+2050          returns a form to reset the user password 
+2051   
+2052          .. method:: Auth.reset_password([next=DEFAULT 
+2053              [, onvalidation=DEFAULT [, onaccept=DEFAULT [, log=DEFAULT]]]]) 
+2054   
+2055          """ 
+2056   
+2057          table_user = self.settings.table_user 
+2058          request = current.request 
+2059          # response = current.response 
+2060          session = current.session 
+2061   
+2062          if next == DEFAULT: 
+2063              next = request.get_vars._next \ 
+2064                  or request.post_vars._next \ 
+2065                  or self.settings.reset_password_next 
+2066   
+2067          try: 
+2068              key = request.vars.key or request.args[-1] 
+2069              t0 = int(key.split('-')[0]) 
+2070              if time.time()-t0 > 60*60*24: raise Exception 
+2071              user = self.db(table_user.reset_password_key == key).select().first() 
+2072              if not user: raise Exception 
+2073          except Exception: 
+2074              session.flash = self.messages.invalid_reset_password 
+2075              redirect(next) 
+2076          passfield = self.settings.password_field 
+2077          form = SQLFORM.factory( 
+2078              Field('new_password', 'password', 
+2079                    label=self.messages.new_password, 
+2080                    requires=self.settings.table_user[passfield].requires), 
+2081              Field('new_password2', 'password', 
+2082                    label=self.messages.verify_password, 
+2083                    requires=[IS_EXPR('value==%s' % repr(request.vars.new_password), 
+2084                                      self.messages.mismatched_password)]), 
+2085              submit_button=self.messages.password_reset_button, 
+2086              formstyle=self.settings.formstyle, 
+2087              separator=self.settings.label_separator 
+2088          ) 
+2089          if form.accepts(request,session,hideerror=self.settings.hideerror): 
+2090              user.update_record(**{passfield:form.vars.new_password, 
+2091                                    'registration_key':'', 
+2092                                    'reset_password_key':''}) 
+2093              session.flash = self.messages.password_changed 
+2094              redirect(next) 
+2095          return form 
+
    2096   
+
    2097 -    def request_reset_password( 
+2098          self, 
+2099          next=DEFAULT, 
+2100          onvalidation=DEFAULT, 
+2101          onaccept=DEFAULT, 
+2102          log=DEFAULT, 
+2103          ): 
+
    2104          """ 
+2105          returns a form to reset the user password 
+2106   
+2107          .. method:: Auth.reset_password([next=DEFAULT 
+2108              [, onvalidation=DEFAULT [, onaccept=DEFAULT [, log=DEFAULT]]]]) 
+2109   
+2110          """ 
+2111   
+2112          table_user = self.settings.table_user 
+2113          request = current.request 
+2114          response = current.response 
+2115          session = current.session 
+2116          captcha = self.settings.retrieve_password_captcha or \ 
+2117                  (self.settings.retrieve_password_captcha!=False and self.settings.captcha) 
+2118   
+2119          if next == DEFAULT: 
+2120              next = request.get_vars._next \ 
+2121                  or request.post_vars._next \ 
+2122                  or self.settings.request_reset_password_next 
+2123   
+2124          if not self.settings.mailer: 
+2125              response.flash = self.messages.function_disabled 
+2126              return '' 
+2127          if onvalidation == DEFAULT: 
+2128              onvalidation = self.settings.reset_password_onvalidation 
+2129          if onaccept == DEFAULT: 
+2130              onaccept = self.settings.reset_password_onaccept 
+2131          if log == DEFAULT: 
+2132              log = self.messages.reset_password_log 
+2133          # old_requires = table_user.email.requires <<< perhaps should be restored 
+2134          table_user.email.requires = [ 
+2135              IS_EMAIL(error_message=self.messages.invalid_email), 
+2136              IS_IN_DB(self.db, table_user.email, 
+2137                       error_message=self.messages.invalid_email)] 
+2138          form = SQLFORM(table_user, 
+2139                         fields=['email'], 
+2140                         hidden=dict(_next=next), 
+2141                         showid=self.settings.showid, 
+2142                         submit_button=self.messages.password_reset_button, 
+2143                         delete_label=self.messages.delete_label, 
+2144                         formstyle=self.settings.formstyle, 
+2145                         separator=self.settings.label_separator 
+2146                         ) 
+2147          if captcha: 
+2148              addrow(form, captcha.label, captcha, captcha.comment, self.settings.formstyle,'captcha__row') 
+2149          if form.accepts(request, session, 
+2150                          formname='reset_password', dbio=False, 
+2151                          onvalidation=onvalidation, 
+2152                          hideerror=self.settings.hideerror): 
+2153              user = self.db(table_user.email == form.vars.email).select().first() 
+2154              if not user: 
+2155                  session.flash = self.messages.invalid_email 
+2156                  redirect(self.url(args=request.args)) 
+2157              elif user.registration_key in ('pending','disabled','blocked'): 
+2158                  session.flash = self.messages.registration_pending 
+2159                  redirect(self.url(args=request.args)) 
+2160              reset_password_key = str(int(time.time()))+'-' + web2py_uuid() 
+2161   
+2162              if self.settings.mailer.send(to=form.vars.email, 
+2163                                           subject=self.messages.reset_password_subject, 
+2164                                           message=self.messages.reset_password % \ 
+2165                                               dict(key=reset_password_key)): 
+2166                  session.flash = self.messages.email_sent 
+2167                  user.update_record(reset_password_key=reset_password_key) 
+2168              else: 
+2169                  session.flash = self.messages.unable_to_send_email 
+2170              if log: 
+2171                  self.log_event(log % user) 
+2172              callback(onaccept,form) 
+2173              if not next: 
+2174                  next = self.url(args = request.args) 
+2175              elif isinstance(next, (list, tuple)): ### fix issue with 2.6 
+2176                  next = next[0] 
+2177              elif next and not next[0] == '/' and next[:4] != 'http': 
+2178                  next = self.url(next.replace('[id]', str(form.vars.id))) 
+2179              redirect(next) 
+2180          # old_requires = table_user.email.requires 
+2181          return form 
+
    2182   
+
    2183 -    def retrieve_password( 
+2184          self, 
+2185          next=DEFAULT, 
+2186          onvalidation=DEFAULT, 
+2187          onaccept=DEFAULT, 
+2188          log=DEFAULT, 
+2189          ): 
+
    2190          if self.settings.reset_password_requires_verification: 
+2191              return self.request_reset_password(next,onvalidation,onaccept,log) 
+2192          else: 
+2193              return self.reset_password_deprecated(next,onvalidation,onaccept,log) 
+
    2194   
+
    2195 -    def change_password( 
+2196          self, 
+2197          next=DEFAULT, 
+2198          onvalidation=DEFAULT, 
+2199          onaccept=DEFAULT, 
+2200          log=DEFAULT, 
+2201          ): 
+
    2202          """ 
+2203          returns a form that lets the user change password 
+2204   
+2205          .. method:: Auth.change_password([next=DEFAULT[, onvalidation=DEFAULT[, 
+2206              onaccept=DEFAULT[, log=DEFAULT]]]]) 
+2207          """ 
+2208   
+2209          if not self.is_logged_in(): 
+2210              redirect(self.settings.login_url) 
+2211          db = self.db 
+2212          table_user = self.settings.table_user 
+2213          usern = self.settings.table_user_name 
+2214          s = db(table_user.id == self.user.id) 
+2215   
+2216          request = current.request 
+2217          session = current.session 
+2218          if next == DEFAULT: 
+2219              next = request.get_vars._next \ 
+2220                  or request.post_vars._next \ 
+2221                  or self.settings.change_password_next 
+2222          if onvalidation == DEFAULT: 
+2223              onvalidation = self.settings.change_password_onvalidation 
+2224          if onaccept == DEFAULT: 
+2225              onaccept = self.settings.change_password_onaccept 
+2226          if log == DEFAULT: 
+2227              log = self.messages.change_password_log 
+2228          passfield = self.settings.password_field 
+2229          form = SQLFORM.factory( 
+2230              Field('old_password', 'password', 
+2231                  label=self.messages.old_password, 
+2232                  requires=validators( 
+2233                       table_user[passfield].requires, 
+2234                       IS_IN_DB(s, '%s.%s' % (usern, passfield), 
+2235                                error_message=self.messages.invalid_password))), 
+2236              Field('new_password', 'password', 
+2237                  label=self.messages.new_password, 
+2238                  requires=table_user[passfield].requires), 
+2239              Field('new_password2', 'password', 
+2240                  label=self.messages.verify_password, 
+2241                  requires=[IS_EXPR('value==%s' % repr(request.vars.new_password), 
+2242                                self.messages.mismatched_password)]), 
+2243              submit_button=self.messages.password_change_button, 
+2244              formstyle = self.settings.formstyle, 
+2245              separator=self.settings.label_separator 
+2246          ) 
+2247          if form.accepts(request, session, 
+2248                          formname='change_password', 
+2249                          onvalidation=onvalidation, 
+2250                          hideerror=self.settings.hideerror): 
+2251              d = {passfield: form.vars.new_password} 
+2252              s.update(**d) 
+2253              session.flash = self.messages.password_changed 
+2254              if log: 
+2255                  self.log_event(log % self.user) 
+2256              callback(onaccept,form) 
+2257              if not next: 
+2258                  next = self.url(args=request.args) 
+2259              elif isinstance(next, (list, tuple)): ### fix issue with 2.6 
+2260                  next = next[0] 
+2261              elif next and not next[0] == '/' and next[:4] != 'http': 
+2262                  next = self.url(next.replace('[id]', str(form.vars.id))) 
+2263              redirect(next) 
+2264          return form 
+
    2265   
+
    2266 -    def profile( 
+2267          self, 
+2268          next=DEFAULT, 
+2269          onvalidation=DEFAULT, 
+2270          onaccept=DEFAULT, 
+2271          log=DEFAULT, 
+2272          ): 
+
    2273          """ 
+2274          returns a form that lets the user change his/her profile 
+2275   
+2276          .. method:: Auth.profile([next=DEFAULT [, onvalidation=DEFAULT 
+2277              [, onaccept=DEFAULT [, log=DEFAULT]]]]) 
+2278   
+2279          """ 
+2280   
+2281          table_user = self.settings.table_user 
+2282          if not self.is_logged_in(): 
+2283              redirect(self.settings.login_url) 
+2284          passfield = self.settings.password_field 
+2285          self.settings.table_user[passfield].writable = False 
+2286          request = current.request 
+2287          session = current.session 
+2288          if next == DEFAULT: 
+2289              next = request.get_vars._next \ 
+2290                  or request.post_vars._next \ 
+2291                  or self.settings.profile_next 
+2292          if onvalidation == DEFAULT: 
+2293              onvalidation = self.settings.profile_onvalidation 
+2294          if onaccept == DEFAULT: 
+2295              onaccept = self.settings.profile_onaccept 
+2296          if log == DEFAULT: 
+2297              log = self.messages.profile_log 
+2298          form = SQLFORM( 
+2299              table_user, 
+2300              self.user.id, 
+2301              fields = self.settings.profile_fields, 
+2302              hidden = dict(_next=next), 
+2303              showid = self.settings.showid, 
+2304              submit_button = self.messages.profile_save_button, 
+2305              delete_label = self.messages.delete_label, 
+2306              upload = self.settings.download_url, 
+2307              formstyle = self.settings.formstyle, 
+2308              separator=self.settings.label_separator 
+2309              ) 
+2310          if form.accepts(request, session, 
+2311                          formname='profile', 
+2312                          onvalidation=onvalidation,hideerror=self.settings.hideerror): 
+2313              self.user.update(table_user._filter_fields(form.vars)) 
+2314              session.flash = self.messages.profile_updated 
+2315              if log: 
+2316                  self.log_event(log % self.user) 
+2317              callback(onaccept,form) 
+2318              if not next: 
+2319                  next = self.url(args=request.args) 
+2320              elif isinstance(next, (list, tuple)): ### fix issue with 2.6 
+2321                  next = next[0] 
+2322              elif next and not next[0] == '/' and next[:4] != 'http': 
+2323                  next = self.url(next.replace('[id]', str(form.vars.id))) 
+2324              redirect(next) 
+2325          return form 
+
    2326   
+
    2327 -    def is_impersonating(self): 
+
    2328          return current.session.auth.impersonator 
+
    2329   
+
    2330 -    def impersonate(self, user_id=DEFAULT): 
+
    2331          """ 
+2332          usage: POST TO http://..../impersonate request.post_vars.user_id=<id> 
+2333          set request.post_vars.user_id to 0 to restore original user. 
+2334   
+2335          requires impersonator is logged in and 
+2336          has_permission('impersonate', 'auth_user', user_id) 
+2337          """ 
+2338          request = current.request 
+2339          session = current.session 
+2340          auth = session.auth 
+2341          if not self.is_logged_in(): 
+2342              raise HTTP(401, "Not Authorized") 
+2343          current_id = auth.user.id 
+2344          requested_id = user_id 
+2345          if user_id == DEFAULT: 
+2346              user_id = current.request.post_vars.user_id 
+2347          if user_id and user_id != self.user.id and user_id != '0': 
+2348              if not self.has_permission('impersonate', 
+2349                                         self.settings.table_user_name, 
+2350                                         user_id): 
+2351                  raise HTTP(403, "Forbidden") 
+2352              user = self.settings.table_user(user_id) 
+2353              if not user: 
+2354                  raise HTTP(401, "Not Authorized") 
+2355              auth.impersonator = cPickle.dumps(session) 
+2356              auth.user.update( 
+2357                  self.settings.table_user._filter_fields(user, True)) 
+2358              self.user = auth.user 
+2359              if self.settings.login_onaccept: 
+2360                  form = Storage(dict(vars=self.user)) 
+2361                  self.settings.login_onaccept(form) 
+2362              log = self.messages.impersonate_log 
+2363              if log: 
+2364                  self.log_event(log % dict(id=current_id,other_id=auth.user.id)) 
+2365          elif user_id in (0, '0') and self.is_impersonating(): 
+2366              session.clear() 
+2367              session.update(cPickle.loads(auth.impersonator)) 
+2368              self.user = session.auth.user 
+2369          if requested_id == DEFAULT and not request.post_vars: 
+2370              return SQLFORM.factory(Field('user_id','integer')) 
+2371          return self.user 
+
    2372   
+
    2373 -    def groups(self): 
+
    2374          """ 
+2375          displays the groups and their roles for the logged in user 
+2376          """ 
+2377   
+2378          if not self.is_logged_in(): 
+2379              redirect(self.settings.login_url) 
+2380          memberships = self.db(self.settings.table_membership.user_id 
+2381                                 == self.user.id).select() 
+2382          table = TABLE() 
+2383          for membership in memberships: 
+2384              groups = self.db(self.settings.table_group.id 
+2385                                == membership.group_id).select() 
+2386              if groups: 
+2387                  group = groups[0] 
+2388                  table.append(TR(H3(group.role, '(%s)' % group.id))) 
+2389                  table.append(TR(P(group.description))) 
+2390          if not memberships: 
+2391              return None 
+2392          return table 
+
    2393   
+
    2394 -    def not_authorized(self): 
+
    2395          """ 
+2396          you can change the view for this page to make it look as you like 
+2397          """ 
+2398   
+2399          return 'ACCESS DENIED' 
+
    2400   
+
    2401 -    def requires(self, condition): 
+
    2402          """ 
+2403          decorator that prevents access to action if not logged in 
+2404          """ 
+2405   
+2406          def decorator(action): 
+2407   
+2408              def f(*a, **b): 
+2409   
+2410                  if self.settings.allow_basic_login_only and not self.basic(): 
+2411                      if current.request.is_restful: 
+2412                          raise HTTP(403,"Not authorized") 
+2413                      return call_or_redirect(self.settings.on_failed_authorization) 
+2414   
+2415                  if not condition: 
+2416                      if current.request.is_restful: 
+2417                          raise HTTP(403,"Not authorized") 
+2418                      if not self.basic() and not self.is_logged_in(): 
+2419                          request = current.request 
+2420                          next = URL(r=request,args=request.args, 
+2421                                     vars=request.get_vars) 
+2422                          current.session.flash = current.response.flash 
+2423                          return call_or_redirect( 
+2424                              self.settings.on_failed_authentication, 
+2425                              self.settings.login_url + '?_next='+urllib.quote(next)) 
+2426                      else: 
+2427                          current.session.flash = self.messages.access_denied 
+2428                          return call_or_redirect(self.settings.on_failed_authorization) 
+2429                  return action(*a, **b) 
+
    2430              f.__doc__ = action.__doc__ 
+2431              f.__name__ = action.__name__ 
+2432              f.__dict__.update(action.__dict__) 
+2433              return f 
+2434   
+2435          return decorator 
+2436   
+
    2437 -    def requires_login(self): 
+
    2438          """ 
+2439          decorator that prevents access to action if not logged in 
+2440          """ 
+2441   
+2442          def decorator(action): 
+2443   
+2444              def f(*a, **b): 
+2445   
+2446                  if self.settings.allow_basic_login_only and not self.basic(): 
+2447                      if current.request.is_restful: 
+2448                          raise HTTP(403,"Not authorized") 
+2449                      return call_or_redirect(self.settings.on_failed_authorization) 
+2450   
+2451                  if not self.basic() and not self.is_logged_in(): 
+2452                      if current.request.is_restful: 
+2453                          raise HTTP(403,"Not authorized") 
+2454                      request = current.request 
+2455                      next = URL(r=request,args=request.args, 
+2456                                 vars=request.get_vars) 
+2457                      current.session.flash = current.response.flash 
+2458                      return call_or_redirect( 
+2459                          self.settings.on_failed_authentication, 
+2460                          self.settings.login_url + '?_next='+urllib.quote(next) 
+2461                          ) 
+2462                  return action(*a, **b) 
+
    2463              f.__doc__ = action.__doc__ 
+2464              f.__name__ = action.__name__ 
+2465              f.__dict__.update(action.__dict__) 
+2466              return f 
+2467   
+2468          return decorator 
+2469   
+
    2470 -    def requires_membership(self, role=None, group_id=None): 
+
    2471          """ 
+2472          decorator that prevents access to action if not logged in or 
+2473          if user logged in is not a member of group_id. 
+2474          If role is provided instead of group_id then the 
+2475          group_id is calculated. 
+2476          """ 
+2477   
+2478          def decorator(action): 
+2479              def f(*a, **b): 
+2480                  if self.settings.allow_basic_login_only and not self.basic(): 
+2481                      if current.request.is_restful: 
+2482                          raise HTTP(403,"Not authorized") 
+2483                      return call_or_redirect(self.settings.on_failed_authorization) 
+2484   
+2485                  if not self.basic() and not self.is_logged_in(): 
+2486                      if current.request.is_restful: 
+2487                          raise HTTP(403,"Not authorized") 
+2488                      request = current.request 
+2489                      next = URL(r=request,args=request.args, 
+2490                                 vars=request.get_vars) 
+2491                      current.session.flash = current.response.flash 
+2492                      return call_or_redirect( 
+2493                          self.settings.on_failed_authentication, 
+2494                          self.settings.login_url + '?_next='+urllib.quote(next) 
+2495                          ) 
+2496                  if not self.has_membership(group_id=group_id, role=role): 
+2497                      current.session.flash = self.messages.access_denied 
+2498                      return call_or_redirect(self.settings.on_failed_authorization) 
+2499                  return action(*a, **b) 
+
    2500              f.__doc__ = action.__doc__ 
+2501              f.__name__ = action.__name__ 
+2502              f.__dict__.update(action.__dict__) 
+2503              return f 
+2504   
+2505          return decorator 
+2506   
+2507   
+
    2508 -    def requires_permission( 
+2509          self, 
+2510          name, 
+2511          table_name='', 
+2512          record_id=0, 
+2513          ): 
+
    2514          """ 
+2515          decorator that prevents access to action if not logged in or 
+2516          if user logged in is not a member of any group (role) that 
+2517          has 'name' access to 'table_name', 'record_id'. 
+2518          """ 
+2519   
+2520          def decorator(action): 
+2521   
+2522              def f(*a, **b): 
+2523                  if self.settings.allow_basic_login_only and not self.basic(): 
+2524                      if current.request.is_restful: 
+2525                          raise HTTP(403,"Not authorized") 
+2526                      return call_or_redirect(self.settings.on_failed_authorization) 
+2527   
+2528                  if not self.basic() and not self.is_logged_in(): 
+2529                      if current.request.is_restful: 
+2530                          raise HTTP(403,"Not authorized") 
+2531                      request = current.request 
+2532                      next = URL(r=request,args=request.args, 
+2533                                 vars=request.get_vars) 
+2534                      current.session.flash = current.response.flash 
+2535                      return call_or_redirect( 
+2536                          self.settings.on_failed_authentication, 
+2537                          self.settings.login_url + '?_next='+urllib.quote(next) 
+2538                          ) 
+2539                  if not self.has_permission(name, table_name, record_id): 
+2540                      current.session.flash = self.messages.access_denied 
+2541                      return call_or_redirect(self.settings.on_failed_authorization) 
+2542                  return action(*a, **b) 
+
    2543              f.__doc__ = action.__doc__ 
+2544              f.__name__ = action.__name__ 
+2545              f.__dict__.update(action.__dict__) 
+2546              return f 
+2547   
+2548          return decorator 
+2549   
+
    2550 -    def requires_signature(self): 
+
    2551          """ 
+2552          decorator that prevents access to action if not logged in or 
+2553          if user logged in is not a member of group_id. 
+2554          If role is provided instead of group_id then the 
+2555          group_id is calculated. 
+2556          """ 
+2557   
+2558          def decorator(action): 
+2559              def f(*a, **b): 
+2560                  if self.settings.allow_basic_login_only and not self.basic(): 
+2561                      if current.request.is_restful: 
+2562                          raise HTTP(403,"Not authorized") 
+2563                      return call_or_redirect(self.settings.on_failed_authorization) 
+2564   
+2565                  if not self.basic() and not self.is_logged_in(): 
+2566                      if current.request.is_restful: 
+2567                          raise HTTP(403,"Not authorized") 
+2568                      request = current.request 
+2569                      next = URL(r=request,args=request.args, 
+2570                                 vars=request.get_vars) 
+2571                      current.session.flash = current.response.flash 
+2572                      return call_or_redirect( 
+2573                          self.settings.on_failed_authentication, 
+2574                          self.settings.login_url + '?_next='+urllib.quote(next) 
+2575                          ) 
+2576                  if not URL.verify(current.request,user_signature=True): 
+2577                      current.session.flash = self.messages.access_denied 
+2578                      return call_or_redirect(self.settings.on_failed_authorization) 
+2579                  return action(*a, **b) 
+
    2580              f.__doc__ = action.__doc__ 
+2581              f.__name__ = action.__name__ 
+2582              f.__dict__.update(action.__dict__) 
+2583              return f 
+2584   
+2585          return decorator 
+2586   
+
    2587 -    def add_group(self, role, description=''): 
+
    2588          """ 
+2589          creates a group associated to a role 
+2590          """ 
+2591   
+2592          group_id = self.settings.table_group.insert(role=role, 
+2593                  description=description) 
+2594          log = self.messages.add_group_log 
+2595          if log: 
+2596              self.log_event(log % dict(group_id=group_id, role=role)) 
+2597          return group_id 
+
    2598   
+
    2599 -    def del_group(self, group_id): 
+
    2600          """ 
+2601          deletes a group 
+2602          """ 
+2603   
+2604          self.db(self.settings.table_group.id == group_id).delete() 
+2605          self.db(self.settings.table_membership.group_id 
+2606                   == group_id).delete() 
+2607          self.db(self.settings.table_permission.group_id 
+2608                   == group_id).delete() 
+2609          log = self.messages.del_group_log 
+2610          if log: 
+2611              self.log_event(log % dict(group_id=group_id)) 
+
    2612   
+
    2613 -    def id_group(self, role): 
+
    2614          """ 
+2615          returns the group_id of the group specified by the role 
+2616          """ 
+2617          rows = self.db(self.settings.table_group.role == role).select() 
+2618          if not rows: 
+2619              return None 
+2620          return rows[0].id 
+
    2621   
+
    2622 -    def user_group(self, user_id = None): 
+
    2623          """ 
+2624          returns the group_id of the group uniquely associated to this user 
+2625          i.e. role=user:[user_id] 
+2626          """ 
+2627          if not user_id and self.user: 
+2628              user_id = self.user.id 
+2629          role = 'user_%s' % user_id 
+2630          return self.id_group(role) 
+
    2631   
+
    2632 -    def has_membership(self, group_id=None, user_id=None, role=None): 
+
    2633          """ 
+2634          checks if user is member of group_id or role 
+2635          """ 
+2636   
+2637          group_id = group_id or self.id_group(role) 
+2638          try: 
+2639              group_id = int(group_id) 
+2640          except: 
+2641              group_id = self.id_group(group_id) # interpret group_id as a role 
+2642          if not user_id and self.user: 
+2643              user_id = self.user.id 
+2644          membership = self.settings.table_membership 
+2645          if self.db((membership.user_id == user_id) 
+2646                      & (membership.group_id == group_id)).select(): 
+2647              r = True 
+2648          else: 
+2649              r = False 
+2650          log = self.messages.has_membership_log 
+2651          if log: 
+2652              self.log_event(log % dict(user_id=user_id, 
+2653                                        group_id=group_id, check=r)) 
+2654          return r 
+
    2655   
+
    2656 -    def add_membership(self, group_id=None, user_id=None, role=None): 
+
    2657          """ 
+2658          gives user_id membership of group_id or role 
+2659          if user_id==None than user_id is that of current logged in user 
+2660          """ 
+2661   
+2662          group_id = group_id or self.id_group(role) 
+2663          try: 
+2664              group_id = int(group_id) 
+2665          except: 
+2666              group_id = self.id_group(group_id) # interpret group_id as a role 
+2667          if not user_id and self.user: 
+2668              user_id = self.user.id 
+2669          membership = self.settings.table_membership 
+2670          record = membership(user_id = user_id,group_id = group_id) 
+2671          if record: 
+2672              return record.id 
+2673          else: 
+2674              id = membership.insert(group_id=group_id, user_id=user_id) 
+2675          log = self.messages.add_membership_log 
+2676          if log: 
+2677              self.log_event(log % dict(user_id=user_id, 
+2678                                        group_id=group_id)) 
+2679          return id 
+
    2680   
+
    2681 -    def del_membership(self, group_id, user_id=None, role=None): 
+
    2682          """ 
+2683          revokes membership from group_id to user_id 
+2684          if user_id==None than user_id is that of current logged in user 
+2685          """ 
+2686   
+2687          group_id = group_id or self.id_group(role) 
+2688          if not user_id and self.user: 
+2689              user_id = self.user.id 
+2690          membership = self.settings.table_membership 
+2691          log = self.messages.del_membership_log 
+2692          if log: 
+2693              self.log_event(log % dict(user_id=user_id, 
+2694                                        group_id=group_id)) 
+2695          return self.db(membership.user_id 
+2696                         == user_id)(membership.group_id 
+2697                                     == group_id).delete() 
+
    2698   
+
    2699 -    def has_permission( 
+2700          self, 
+2701          name='any', 
+2702          table_name='', 
+2703          record_id=0, 
+2704          user_id=None, 
+2705          group_id=None, 
+2706          ): 
+
    2707          """ 
+2708          checks if user_id or current logged in user is member of a group 
+2709          that has 'name' permission on 'table_name' and 'record_id' 
+2710          if group_id is passed, it checks whether the group has the permission 
+2711          """ 
+2712   
+2713          if not user_id and not group_id and self.user: 
+2714              user_id = self.user.id 
+2715          if user_id: 
+2716              membership = self.settings.table_membership 
+2717              rows = self.db(membership.user_id 
+2718                             == user_id).select(membership.group_id) 
+2719              groups = set([row.group_id for row in rows]) 
+2720              if group_id and not group_id in groups: 
+2721                  return False 
+2722          else: 
+2723              groups = set([group_id]) 
+2724          permission = self.settings.table_permission 
+2725          rows = self.db(permission.name == name)(permission.table_name 
+2726                   == str(table_name))(permission.record_id 
+2727                   == record_id).select(permission.group_id) 
+2728          groups_required = set([row.group_id for row in rows]) 
+2729          if record_id: 
+2730              rows = self.db(permission.name 
+2731                              == name)(permission.table_name 
+2732                       == str(table_name))(permission.record_id 
+2733                       == 0).select(permission.group_id) 
+2734              groups_required = groups_required.union(set([row.group_id 
+2735                      for row in rows])) 
+2736          if groups.intersection(groups_required): 
+2737              r = True 
+2738          else: 
+2739              r = False 
+2740          log = self.messages.has_permission_log 
+2741          if log and user_id: 
+2742              self.log_event(log % dict(user_id=user_id, name=name, 
+2743                             table_name=table_name, record_id=record_id)) 
+2744          return r 
+
    2745   
+
    2746 -    def add_permission( 
+2747          self, 
+2748          group_id, 
+2749          name='any', 
+2750          table_name='', 
+2751          record_id=0, 
+2752          ): 
+
    2753          """ 
+2754          gives group_id 'name' access to 'table_name' and 'record_id' 
+2755          """ 
+2756   
+2757          permission = self.settings.table_permission 
+2758          if group_id == 0: 
+2759              group_id = self.user_group() 
+2760          id = permission.insert(group_id=group_id, name=name, 
+2761                                 table_name=str(table_name), 
+2762                                 record_id=long(record_id)) 
+2763          log = self.messages.add_permission_log 
+2764          if log: 
+2765              self.log_event(log % dict(permission_id=id, group_id=group_id, 
+2766                             name=name, table_name=table_name, 
+2767                             record_id=record_id)) 
+2768          return id 
+
    2769   
+
    2770 -    def del_permission( 
+2771          self, 
+2772          group_id, 
+2773          name='any', 
+2774          table_name='', 
+2775          record_id=0, 
+2776          ): 
+
    2777          """ 
+2778          revokes group_id 'name' access to 'table_name' and 'record_id' 
+2779          """ 
+2780   
+2781          permission = self.settings.table_permission 
+2782          log = self.messages.del_permission_log 
+2783          if log: 
+2784              self.log_event(log % dict(group_id=group_id, name=name, 
+2785                             table_name=table_name, record_id=record_id)) 
+2786          return self.db(permission.group_id == group_id)(permission.name 
+2787                   == name)(permission.table_name 
+2788                             == str(table_name))(permission.record_id 
+2789                   == long(record_id)).delete() 
+
    2790   
+
    2791 -    def accessible_query(self, name, table, user_id=None): 
+
    2792          """ 
+2793          returns a query with all accessible records for user_id or 
+2794          the current logged in user 
+2795          this method does not work on GAE because uses JOIN and IN 
+2796   
+2797          example:: 
+2798   
+2799             db(auth.accessible_query('read', db.mytable)).select(db.mytable.ALL) 
+2800   
+2801          """ 
+2802          if not user_id: 
+2803              user_id = self.user.id 
+2804          if self.has_permission(name, table, 0, user_id): 
+2805              return table.id > 0 
+2806          db = self.db 
+2807          membership = self.settings.table_membership 
+2808          permission = self.settings.table_permission 
+2809          return table.id.belongs(db(membership.user_id == user_id)\ 
+2810                             (membership.group_id == permission.group_id)\ 
+2811                             (permission.name == name)\ 
+2812                             (permission.table_name == table)\ 
+2813                             ._select(permission.record_id)) 
+
    2814   
+2815   
+
    2816 -class Crud(object): 
+
    2817   
+
    2818 -    def url(self, f=None, args=[], vars={}): 
+
    2819          """ 
+2820          this should point to the controller that exposes 
+2821          download and crud 
+2822          """ 
+2823          return URL(c=self.settings.controller,f=f,args=args,vars=vars) 
+
    2824   
+
    2825 -    def __init__(self, environment, db=None, controller='default'): 
+
    2826          self.db = db 
+2827          if not db and environment and isinstance(environment,DAL): 
+2828              self.db = environment 
+2829          elif not db: 
+2830              raise SyntaxError, "must pass db as first or second argument" 
+2831          self.environment = current 
+2832          settings = self.settings = Settings() 
+2833          settings.auth = None 
+2834          settings.logger = None 
+2835   
+2836          settings.create_next = None 
+2837          settings.update_next = None 
+2838          settings.controller = controller 
+2839          settings.delete_next = self.url() 
+2840          settings.download_url = self.url('download') 
+2841          settings.create_onvalidation = StorageList() 
+2842          settings.update_onvalidation = StorageList() 
+2843          settings.delete_onvalidation = StorageList() 
+2844          settings.create_onaccept = StorageList() 
+2845          settings.update_onaccept = StorageList() 
+2846          settings.update_ondelete = StorageList() 
+2847          settings.delete_onaccept = StorageList() 
+2848          settings.update_deletable = True 
+2849          settings.showid = False 
+2850          settings.keepvalues = False 
+2851          settings.create_captcha = None 
+2852          settings.update_captcha = None 
+2853          settings.captcha = None 
+2854          settings.formstyle = 'table3cols' 
+2855          settings.label_separator = ': ' 
+2856          settings.hideerror = False 
+2857          settings.detect_record_change = True 
+2858          settings.hmac_key = None 
+2859          settings.lock_keys = True 
+2860   
+2861          messages = self.messages = Messages(current.T) 
+2862          messages.submit_button = 'Submit' 
+2863          messages.delete_label = 'Check to delete:' 
+2864          messages.record_created = 'Record Created' 
+2865          messages.record_updated = 'Record Updated' 
+2866          messages.record_deleted = 'Record Deleted' 
+2867   
+2868          messages.update_log = 'Record %(id)s updated' 
+2869          messages.create_log = 'Record %(id)s created' 
+2870          messages.read_log = 'Record %(id)s read' 
+2871          messages.delete_log = 'Record %(id)s deleted' 
+2872   
+2873          messages.lock_keys = True 
+
    2874   
+
    2875 -    def __call__(self): 
+
    2876          args = current.request.args 
+2877          if len(args) < 1: 
+2878              raise HTTP(404) 
+2879          elif args[0] == 'tables': 
+2880              return self.tables() 
+2881          elif len(args) > 1 and not args(1) in self.db.tables: 
+2882              raise HTTP(404) 
+2883          table = self.db[args(1)] 
+2884          if args[0] == 'create': 
+2885              return self.create(table) 
+2886          elif args[0] == 'select': 
+2887              return self.select(table,linkto=self.url(args='read')) 
+2888          elif args[0] == 'search': 
+2889              form, rows = self.search(table,linkto=self.url(args='read')) 
+2890              return DIV(form,SQLTABLE(rows)) 
+2891          elif args[0] == 'read': 
+2892              return self.read(table, args(2)) 
+2893          elif args[0] == 'update': 
+2894              return self.update(table, args(2)) 
+2895          elif args[0] == 'delete': 
+2896              return self.delete(table, args(2)) 
+2897          else: 
+2898              raise HTTP(404) 
+
    2899   
+
    2900 -    def log_event(self, message): 
+
    2901          if self.settings.logger: 
+2902              self.settings.logger.log_event(message, 'crud') 
+
    2903   
+
    2904 -    def has_permission(self, name, table, record=0): 
+
    2905          if not self.settings.auth: 
+2906              return True 
+2907          try: 
+2908              record_id = record.id 
+2909          except: 
+2910              record_id = record 
+2911          return self.settings.auth.has_permission(name, str(table), record_id) 
+
    2912   
+
    2913 -    def tables(self): 
+
    2914          return TABLE(*[TR(A(name, 
+2915                              _href=self.url(args=('select',name)))) \ 
+2916                             for name in self.db.tables]) 
+
    2917   
+2918   
+2919      @staticmethod 
+
    2920 -    def archive(form,archive_table=None,current_record='current_record'): 
+
    2921          """ 
+2922          If you have a table (db.mytable) that needs full revision history you can just do:: 
+2923   
+2924              form=crud.update(db.mytable,myrecord,onaccept=crud.archive) 
+2925   
+2926          crud.archive will define a new table "mytable_archive" and store the 
+2927          previous record in the newly created table including a reference 
+2928          to the current record. 
+2929   
+2930          If you want to access such table you need to define it yourself in a model:: 
+2931   
+2932              db.define_table('mytable_archive', 
+2933                  Field('current_record',db.mytable), 
+2934                  db.mytable) 
+2935   
+2936          Notice such table includes all fields of db.mytable plus one: current_record. 
+2937          crud.archive does not timestamp the stored record unless your original table 
+2938          has a fields like:: 
+2939   
+2940              db.define_table(..., 
+2941                  Field('saved_on','datetime', 
+2942                       default=request.now,update=request.now,writable=False), 
+2943                  Field('saved_by',auth.user, 
+2944                       default=auth.user_id,update=auth.user_id,writable=False), 
+2945   
+2946          there is nothing special about these fields since they are filled before 
+2947          the record is archived. 
+2948   
+2949          If you want to change the archive table name and the name of the reference field 
+2950          you can do, for example:: 
+2951   
+2952              db.define_table('myhistory', 
+2953                  Field('parent_record',db.mytable), 
+2954                  db.mytable) 
+2955   
+2956          and use it as:: 
+2957   
+2958              form=crud.update(db.mytable,myrecord, 
+2959                               onaccept=lambda form:crud.archive(form, 
+2960                               archive_table=db.myhistory, 
+2961                               current_record='parent_record')) 
+2962   
+2963          """ 
+2964          old_record = form.record 
+2965          if not old_record: 
+2966              return None 
+2967          table = form.table 
+2968          if not archive_table: 
+2969              archive_table_name = '%s_archive' % table 
+2970              if archive_table_name in table._db: 
+2971                  archive_table = table._db[archive_table_name] 
+2972              else: 
+2973                  archive_table = table._db.define_table(archive_table_name, 
+2974                                                         Field(current_record,table), 
+2975                                                         table) 
+2976          new_record = {current_record:old_record.id} 
+2977          for fieldname in archive_table.fields: 
+2978              if not fieldname in ['id',current_record] and fieldname in old_record: 
+2979                  new_record[fieldname]=old_record[fieldname] 
+2980          id = archive_table.insert(**new_record) 
+2981          return id 
+
    2982   
+
    2983 -    def update( 
+2984          self, 
+2985          table, 
+2986          record, 
+2987          next=DEFAULT, 
+2988          onvalidation=DEFAULT, 
+2989          onaccept=DEFAULT, 
+2990          ondelete=DEFAULT, 
+2991          log=DEFAULT, 
+2992          message=DEFAULT, 
+2993          deletable=DEFAULT, 
+2994          formname=DEFAULT, 
+2995          ): 
+
    2996          """ 
+2997          .. method:: Crud.update(table, record, [next=DEFAULT 
+2998              [, onvalidation=DEFAULT [, onaccept=DEFAULT [, log=DEFAULT 
+2999              [, message=DEFAULT[, deletable=DEFAULT]]]]]]) 
+3000   
+3001          """ 
+3002          if not (isinstance(table, self.db.Table) or table in self.db.tables) \ 
+3003                  or (isinstance(record, str) and not str(record).isdigit()): 
+3004              raise HTTP(404) 
+3005          if not isinstance(table, self.db.Table): 
+3006              table = self.db[table] 
+3007          try: 
+3008              record_id = record.id 
+3009          except: 
+3010              record_id = record or 0 
+3011          if record_id and not self.has_permission('update', table, record_id): 
+3012              redirect(self.settings.auth.settings.on_failed_authorization) 
+3013          if not record_id \ 
+3014                  and not self.has_permission('create', table, record_id): 
+3015              redirect(self.settings.auth.settings.on_failed_authorization) 
+3016   
+3017          request = current.request 
+3018          response = current.response 
+3019          session = current.session 
+3020          if request.extension == 'json' and request.vars.json: 
+3021              request.vars.update(simplejson.loads(request.vars.json)) 
+3022          if next == DEFAULT: 
+3023              next = request.get_vars._next \ 
+3024                  or request.post_vars._next \ 
+3025                  or self.settings.update_next 
+3026          if onvalidation == DEFAULT: 
+3027              onvalidation = self.settings.update_onvalidation 
+3028          if onaccept == DEFAULT: 
+3029              onaccept = self.settings.update_onaccept 
+3030          if ondelete == DEFAULT: 
+3031              ondelete = self.settings.update_ondelete 
+3032          if log == DEFAULT: 
+3033              log = self.messages.update_log 
+3034          if deletable == DEFAULT: 
+3035              deletable = self.settings.update_deletable 
+3036          if message == DEFAULT: 
+3037              message = self.messages.record_updated 
+3038          form = SQLFORM( 
+3039              table, 
+3040              record, 
+3041              hidden=dict(_next=next), 
+3042              showid=self.settings.showid, 
+3043              submit_button=self.messages.submit_button, 
+3044              delete_label=self.messages.delete_label, 
+3045              deletable=deletable, 
+3046              upload=self.settings.download_url, 
+3047              formstyle=self.settings.formstyle, 
+3048              separator=self.settings.label_separator 
+3049              ) 
+3050          self.accepted = False 
+3051          self.deleted = False 
+3052          captcha = self.settings.update_captcha or \ 
+3053                    self.settings.captcha 
+3054          if record and captcha: 
+3055              addrow(form, captcha.label, captcha, captcha.comment, 
+3056                           self.settings.formstyle,'captcha__row') 
+3057          captcha = self.settings.create_captcha or \ 
+3058                    self.settings.captcha 
+3059          if not record and captcha: 
+3060              addrow(form, captcha.label, captcha, captcha.comment, 
+3061                           self.settings.formstyle,'captcha__row') 
+3062          if not request.extension in ('html','load'): 
+3063              (_session, _formname) = (None, None) 
+3064          else: 
+3065              (_session, _formname) = \ 
+3066                  (session, '%s/%s' % (table._tablename, form.record_id)) 
+3067          if formname!=DEFAULT: 
+3068              _formname = formname 
+3069          keepvalues = self.settings.keepvalues 
+3070          if request.vars.delete_this_record: 
+3071              keepvalues = False 
+3072          if isinstance(onvalidation,StorageList): 
+3073              onvalidation=onvalidation.get(table._tablename, []) 
+3074          if form.accepts(request, _session, formname=_formname, 
+3075                          onvalidation=onvalidation, keepvalues=keepvalues, 
+3076                          hideerror=self.settings.hideerror, 
+3077                          detect_record_change = self.settings.detect_record_change): 
+3078              self.accepted = True 
+3079              response.flash = message 
+3080              if log: 
+3081                  self.log_event(log % form.vars) 
+3082              if request.vars.delete_this_record: 
+3083                  self.deleted = True 
+3084                  message = self.messages.record_deleted 
+3085                  callback(ondelete,form,table._tablename) 
+3086              response.flash = message 
+3087              callback(onaccept,form,table._tablename) 
+3088              if not request.extension in ('html','load'): 
+3089                  raise HTTP(200, 'RECORD CREATED/UPDATED') 
+3090              if isinstance(next, (list, tuple)): ### fix issue with 2.6 
+3091                 next = next[0] 
+3092              if next: # Only redirect when explicit 
+3093                  if next[0] != '/' and next[:4] != 'http': 
+3094                      next = URL(r=request, 
+3095                                 f=next.replace('[id]', str(form.vars.id))) 
+3096                  session.flash = response.flash 
+3097                  redirect(next) 
+3098          elif not request.extension in ('html','load'): 
+3099              raise HTTP(401) 
+3100          return form 
+
    3101   
+
    3102 -    def create( 
+3103          self, 
+3104          table, 
+3105          next=DEFAULT, 
+3106          onvalidation=DEFAULT, 
+3107          onaccept=DEFAULT, 
+3108          log=DEFAULT, 
+3109          message=DEFAULT, 
+3110          formname=DEFAULT, 
+3111          ): 
+
    3112          """ 
+3113          .. method:: Crud.create(table, [next=DEFAULT [, onvalidation=DEFAULT 
+3114              [, onaccept=DEFAULT [, log=DEFAULT[, message=DEFAULT]]]]]) 
+3115          """ 
+3116   
+3117          if next == DEFAULT: 
+3118              next = self.settings.create_next 
+3119          if onvalidation == DEFAULT: 
+3120              onvalidation = self.settings.create_onvalidation 
+3121          if onaccept == DEFAULT: 
+3122              onaccept = self.settings.create_onaccept 
+3123          if log == DEFAULT: 
+3124              log = self.messages.create_log 
+3125          if message == DEFAULT: 
+3126              message = self.messages.record_created 
+3127          return self.update( 
+3128              table, 
+3129              None, 
+3130              next=next, 
+3131              onvalidation=onvalidation, 
+3132              onaccept=onaccept, 
+3133              log=log, 
+3134              message=message, 
+3135              deletable=False, 
+3136              formname=formname, 
+3137              ) 
+
    3138   
+
    3139 -    def read(self, table, record): 
+
    3140          if not (isinstance(table, self.db.Table) or table in self.db.tables) \ 
+3141                  or (isinstance(record, str) and not str(record).isdigit()): 
+3142              raise HTTP(404) 
+3143          if not isinstance(table, self.db.Table): 
+3144              table = self.db[table] 
+3145          if not self.has_permission('read', table, record): 
+3146              redirect(self.settings.auth.settings.on_failed_authorization) 
+3147          form = SQLFORM( 
+3148              table, 
+3149              record, 
+3150              readonly=True, 
+3151              comments=False, 
+3152              upload=self.settings.download_url, 
+3153              showid=self.settings.showid, 
+3154              formstyle=self.settings.formstyle, 
+3155              separator=self.settings.label_separator 
+3156              ) 
+3157          if not current.request.extension in ('html','load'): 
+3158              return table._filter_fields(form.record, id=True) 
+3159          return form 
+
    3160   
+
    3161 -    def delete( 
+3162          self, 
+3163          table, 
+3164          record_id, 
+3165          next=DEFAULT, 
+3166          message=DEFAULT, 
+3167          ): 
+
    3168          """ 
+3169          .. method:: Crud.delete(table, record_id, [next=DEFAULT 
+3170              [, message=DEFAULT]]) 
+3171          """ 
+3172          if not (isinstance(table, self.db.Table) or table in self.db.tables) \ 
+3173                  or not str(record_id).isdigit(): 
+3174              raise HTTP(404) 
+3175          if not isinstance(table, self.db.Table): 
+3176              table = self.db[table] 
+3177          if not self.has_permission('delete', table, record_id): 
+3178              redirect(self.settings.auth.settings.on_failed_authorization) 
+3179          request = current.request 
+3180          session = current.session 
+3181          if next == DEFAULT: 
+3182              next = request.get_vars._next \ 
+3183                  or request.post_vars._next \ 
+3184                  or self.settings.delete_next 
+3185          if message == DEFAULT: 
+3186              message = self.messages.record_deleted 
+3187          record = table[record_id] 
+3188          if record: 
+3189              callback(self.settings.delete_onvalidation,record) 
+3190              del table[record_id] 
+3191              callback(self.settings.delete_onaccept,record,table._tablename) 
+3192              session.flash = message 
+3193          if next: # Only redirect when explicit 
+3194              redirect(next) 
+
    3195   
+
    3196 -    def rows( 
+3197          self, 
+3198          table, 
+3199          query=None, 
+3200          fields=None, 
+3201          orderby=None, 
+3202          limitby=None, 
+3203          ): 
+
    3204          request = current.request 
+3205          if not (isinstance(table, self.db.Table) or table in self.db.tables): 
+3206              raise HTTP(404) 
+3207          if not self.has_permission('select', table): 
+3208              redirect(self.settings.auth.settings.on_failed_authorization) 
+3209          #if record_id and not self.has_permission('select', table): 
+3210          #    redirect(self.settings.auth.settings.on_failed_authorization) 
+3211          if not isinstance(table, self.db.Table): 
+3212              table = self.db[table] 
+3213          if not query: 
+3214              query = table.id > 0 
+3215          if not fields: 
+3216              fields = [field for field in table if field.readable] 
+3217          rows = self.db(query).select(*fields,**dict(orderby=orderby, 
+3218                                                      limitby=limitby)) 
+3219          return rows 
+
    3220   
+
    3221 -    def select( 
+3222          self, 
+3223          table, 
+3224          query=None, 
+3225          fields=None, 
+3226          orderby=None, 
+3227          limitby=None, 
+3228          headers={}, 
+3229          **attr 
+3230          ): 
+
    3231          rows = self.rows(table,query,fields,orderby,limitby) 
+3232          if not rows: 
+3233              return None # Nicer than an empty table. 
+3234          if not 'upload' in attr: 
+3235              attr['upload'] = self.url('download') 
+3236          if not current.request.extension in ('html','load'): 
+3237              return rows.as_list() 
+3238          if not headers: 
+3239              if isinstance(table,str): 
+3240                  table = self.db[table] 
+3241              headers = dict((str(k),k.label) for k in table) 
+3242          return SQLTABLE(rows,headers=headers,**attr) 
+
    3243   
+
    3244 -    def get_format(self, field): 
+
    3245          rtable = field._db[field.type[10:]] 
+3246          format = rtable.get('_format', None) 
+3247          if format and isinstance(format, str): 
+3248              return format[2:-2] 
+3249          return field.name 
+
    3250   
+
    3251 -    def get_query(self, field, op, value, refsearch=False): 
+
    3252          try: 
+3253              if refsearch: format = self.get_format(field) 
+3254              if op == 'equals': 
+3255                  if not refsearch: 
+3256                      return field == value 
+3257                  else: 
+3258                      return lambda row: row[field.name][format] == value 
+3259              elif op == 'not equal': 
+3260                  if not refsearch: 
+3261                      return field != value 
+3262                  else: 
+3263                      return lambda row: row[field.name][format] != value 
+3264              elif op == 'greater than': 
+3265                  if not refsearch: 
+3266                      return field > value 
+3267                  else: 
+3268                      return lambda row: row[field.name][format] > value 
+3269              elif op == 'less than': 
+3270                  if not refsearch: 
+3271                      return field < value 
+3272                  else: 
+3273                      return lambda row: row[field.name][format] < value 
+3274              elif op == 'starts with': 
+3275                  if not refsearch: 
+3276                      return field.like(value+'%') 
+3277                  else: 
+3278                      return lambda row: str(row[field.name][format]).startswith(value) 
+3279              elif op == 'ends with': 
+3280                  if not refsearch: 
+3281                      return field.like('%'+value) 
+3282                  else: 
+3283                      return lambda row: str(row[field.name][format]).endswith(value) 
+3284              elif op == 'contains': 
+3285                  if not refsearch: 
+3286                      return field.like('%'+value+'%') 
+3287                  else: 
+3288                      return lambda row: value in row[field.name][format] 
+3289          except: 
+3290              return None 
+
    3291   
+3292   
+
    3293 -    def search(self, *tables, **args): 
+
    3294          """ 
+3295          Creates a search form and its results for a table 
+3296          Example usage: 
+3297          form, results = crud.search(db.test, 
+3298                                 queries = ['equals', 'not equal', 'contains'], 
+3299                                 query_labels={'equals':'Equals', 
+3300                                               'not equal':'Not equal'}, 
+3301                                 fields = ['id','children'], 
+3302                                 field_labels = {'id':'ID','children':'Children'}, 
+3303                                 zero='Please choose', 
+3304                                 query = (db.test.id > 0)&(db.test.id != 3) ) 
+3305          """ 
+3306          table = tables[0] 
+3307          fields = args.get('fields', table.fields) 
+3308          request = current.request 
+3309          db = self.db 
+3310          if not (isinstance(table, db.Table) or table in db.tables): 
+3311              raise HTTP(404) 
+3312          attributes = {} 
+3313          for key in ('orderby','groupby','left','distinct','limitby','cache'): 
+3314              if key in args: attributes[key]=args[key] 
+3315          tbl = TABLE() 
+3316          selected = []; refsearch = []; results = [] 
+3317          ops = args.get('queries', []) 
+3318          zero = args.get('zero', '') 
+3319          if not ops: 
+3320              ops = ['equals', 'not equal', 'greater than', 
+3321                     'less than', 'starts with', 
+3322                     'ends with', 'contains'] 
+3323          ops.insert(0,zero) 
+3324          query_labels = args.get('query_labels', {}) 
+3325          query = args.get('query',table.id > 0) 
+3326          field_labels = args.get('field_labels',{}) 
+3327          for field in fields: 
+3328              field = table[field] 
+3329              if not field.readable: continue 
+3330              fieldname = field.name 
+3331              chkval = request.vars.get('chk' + fieldname, None) 
+3332              txtval = request.vars.get('txt' + fieldname, None) 
+3333              opval = request.vars.get('op' + fieldname, None) 
+3334              row = TR(TD(INPUT(_type = "checkbox", _name = "chk" + fieldname, 
+3335                                _disabled = (field.type == 'id'), 
+3336                                value = (field.type == 'id' or chkval == 'on'))), 
+3337                       TD(field_labels.get(fieldname,field.label)), 
+3338                       TD(SELECT([OPTION(query_labels.get(op,op), 
+3339                                         _value=op) for op in ops], 
+3340                                 _name = "op" + fieldname, 
+3341                                 value = opval)), 
+3342                       TD(INPUT(_type = "text", _name = "txt" + fieldname, 
+3343                                _value = txtval, _id='txt' + fieldname, 
+3344                                _class = str(field.type)))) 
+3345              tbl.append(row) 
+3346              if request.post_vars and (chkval or field.type=='id'): 
+3347                  if txtval and opval != '': 
+3348                      if field.type[0:10] == 'reference ': 
+3349                          refsearch.append(self.get_query(field, 
+3350                                      opval, txtval, refsearch=True)) 
+3351                      else: 
+3352                          value, error = field.validate(txtval) 
+3353                          if not error: 
+3354                              ### TODO deal with 'starts with', 'ends with', 'contains' on GAE 
+3355                              query &= self.get_query(field, opval, value) 
+3356                          else: 
+3357                              row[3].append(DIV(error,_class='error')) 
+3358                  selected.append(field) 
+3359          form = FORM(tbl,INPUT(_type="submit")) 
+3360          if selected: 
+3361              try: 
+3362                  results = db(query).select(*selected,**attributes) 
+3363                  for r in refsearch: 
+3364                      results = results.find(r) 
+3365              except: # hmmm, we should do better here 
+3366                  results = None 
+3367          return form, results 
+
    3368   
+3369   
+3370  urllib2.install_opener(urllib2.build_opener(urllib2.HTTPCookieProcessor())) 
+3371   
+
    3372 -def fetch(url, data=None, headers={}, 
+3373            cookie=Cookie.SimpleCookie(), 
+3374            user_agent='Mozilla/5.0'): 
+
    3375      if data != None: 
+3376          data = urllib.urlencode(data) 
+3377      if user_agent: headers['User-agent'] = user_agent 
+3378      headers['Cookie'] = ' '.join(['%s=%s;'%(c.key,c.value) for c in cookie.values()]) 
+3379      try: 
+3380          from google.appengine.api import urlfetch 
+3381      except ImportError: 
+3382          req = urllib2.Request(url, data, headers) 
+3383          html = urllib2.urlopen(req).read() 
+3384      else: 
+3385          method = ((data==None) and urlfetch.GET) or urlfetch.POST 
+3386          while url is not None: 
+3387              response = urlfetch.fetch(url=url, payload=data, 
+3388                                        method=method, headers=headers, 
+3389                                        allow_truncated=False,follow_redirects=False, 
+3390                                        deadline=10) 
+3391              # next request will be a get, so no need to send the data again 
+3392              data = None 
+3393              method = urlfetch.GET 
+3394              # load cookies from the response 
+3395              cookie.load(response.headers.get('set-cookie', '')) 
+3396              url = response.headers.get('location') 
+3397          html = response.content 
+3398      return html 
+
    3399   
+3400  regex_geocode = \ 
+3401      re.compile('\<coordinates\>(?P<la>[^,]*),(?P<lo>[^,]*).*?\</coordinates\>') 
+3402   
+3403   
+
    3404 -def geocode(address): 
+
    3405      try: 
+3406          a = urllib.quote(address) 
+3407          txt = fetch('http://maps.google.com/maps/geo?q=%s&output=xml' 
+3408                       % a) 
+3409          item = regex_geocode.search(txt) 
+3410          (la, lo) = (float(item.group('la')), float(item.group('lo'))) 
+3411          return (la, lo) 
+3412      except: 
+3413          return (0.0, 0.0) 
+
    3414   
+3415   
+
    3416 -def universal_caller(f, *a, **b): 
+
    3417      c = f.func_code.co_argcount 
+3418      n = f.func_code.co_varnames[:c] 
+3419   
+3420      defaults = f.func_defaults or [] 
+3421      pos_args = n[0:-len(defaults)] 
+3422      named_args = n[-len(defaults):] 
+3423   
+3424      arg_dict = {} 
+3425   
+3426      # Fill the arg_dict with name and value for the submitted, positional values 
+3427      for pos_index, pos_val in enumerate(a[:c]): 
+3428          arg_dict[n[pos_index]] = pos_val    # n[pos_index] is the name of the argument 
+3429   
+3430      # There might be pos_args left, that are sent as named_values. Gather them as well. 
+3431      # If a argument already is populated with values we simply replaces them. 
+3432      for arg_name in pos_args[len(arg_dict):]: 
+3433          if b.has_key(arg_name): 
+3434              arg_dict[arg_name] = b[arg_name] 
+3435   
+3436      if len(arg_dict) >= len(pos_args): 
+3437          # All the positional arguments is found. The function may now be called. 
+3438          # However, we need to update the arg_dict with the values from the named arguments as well. 
+3439          for arg_name in named_args: 
+3440              if b.has_key(arg_name): 
+3441                  arg_dict[arg_name] = b[arg_name] 
+3442   
+3443          return f(**arg_dict) 
+3444   
+3445      # Raise an error, the function cannot be called. 
+3446      raise HTTP(404, "Object does not exist") 
+
    3447   
+3448   
+
    3449 -class Service(object): 
+
    3450   
+
    3451 -    def __init__(self, environment=None): 
+
    3452          self.run_procedures = {} 
+3453          self.csv_procedures = {} 
+3454          self.xml_procedures = {} 
+3455          self.rss_procedures = {} 
+3456          self.json_procedures = {} 
+3457          self.jsonrpc_procedures = {} 
+3458          self.xmlrpc_procedures = {} 
+3459          self.amfrpc_procedures = {} 
+3460          self.amfrpc3_procedures = {} 
+3461          self.soap_procedures = {} 
+
    3462   
+
    3463 -    def run(self, f): 
+
    3464          """ 
+3465          example:: 
+3466   
+3467              service = Service(globals()) 
+3468              @service.run 
+3469              def myfunction(a, b): 
+3470                  return a + b 
+3471              def call(): 
+3472                  return service() 
+3473   
+3474          Then call it with:: 
+3475   
+3476              wget http://..../app/default/call/run/myfunction?a=3&b=4 
+3477   
+3478          """ 
+3479          self.run_procedures[f.__name__] = f 
+3480          return f 
+
    3481   
+
    3482 -    def csv(self, f): 
+
    3483          """ 
+3484          example:: 
+3485   
+3486              service = Service(globals()) 
+3487              @service.csv 
+3488              def myfunction(a, b): 
+3489                  return a + b 
+3490              def call(): 
+3491                  return service() 
+3492   
+3493          Then call it with:: 
+3494   
+3495              wget http://..../app/default/call/csv/myfunction?a=3&b=4 
+3496   
+3497          """ 
+3498          self.run_procedures[f.__name__] = f 
+3499          return f 
+
    3500   
+
    3501 -    def xml(self, f): 
+
    3502          """ 
+3503          example:: 
+3504   
+3505              service = Service(globals()) 
+3506              @service.xml 
+3507              def myfunction(a, b): 
+3508                  return a + b 
+3509              def call(): 
+3510                  return service() 
+3511   
+3512          Then call it with:: 
+3513   
+3514              wget http://..../app/default/call/xml/myfunction?a=3&b=4 
+3515   
+3516          """ 
+3517          self.run_procedures[f.__name__] = f 
+3518          return f 
+
    3519   
+
    3520 -    def rss(self, f): 
+
    3521          """ 
+3522          example:: 
+3523   
+3524              service = Service(globals()) 
+3525              @service.rss 
+3526              def myfunction(): 
+3527                  return dict(title=..., link=..., description=..., 
+3528                      created_on=..., entries=[dict(title=..., link=..., 
+3529                          description=..., created_on=...]) 
+3530              def call(): 
+3531                  return service() 
+3532   
+3533          Then call it with:: 
+3534   
+3535              wget http://..../app/default/call/rss/myfunction 
+3536   
+3537          """ 
+3538          self.rss_procedures[f.__name__] = f 
+3539          return f 
+
    3540   
+
    3541 -    def json(self, f): 
+
    3542          """ 
+3543          example:: 
+3544   
+3545              service = Service(globals()) 
+3546              @service.json 
+3547              def myfunction(a, b): 
+3548                  return [{a: b}] 
+3549              def call(): 
+3550                  return service() 
+3551   
+3552          Then call it with:: 
+3553   
+3554              wget http://..../app/default/call/json/myfunction?a=hello&b=world 
+3555   
+3556          """ 
+3557          self.json_procedures[f.__name__] = f 
+3558          return f 
+
    3559   
+
    3560 -    def jsonrpc(self, f): 
+
    3561          """ 
+3562          example:: 
+3563   
+3564              service = Service(globals()) 
+3565              @service.jsonrpc 
+3566              def myfunction(a, b): 
+3567                  return a + b 
+3568              def call(): 
+3569                  return service() 
+3570   
+3571          Then call it with:: 
+3572   
+3573              wget http://..../app/default/call/jsonrpc/myfunction?a=hello&b=world 
+3574   
+3575          """ 
+3576          self.jsonrpc_procedures[f.__name__] = f 
+3577          return f 
+
    3578   
+
    3579 -    def xmlrpc(self, f): 
+
    3580          """ 
+3581          example:: 
+3582   
+3583              service = Service(globals()) 
+3584              @service.xmlrpc 
+3585              def myfunction(a, b): 
+3586                  return a + b 
+3587              def call(): 
+3588                  return service() 
+3589   
+3590          The call it with:: 
+3591   
+3592              wget http://..../app/default/call/xmlrpc/myfunction?a=hello&b=world 
+3593   
+3594          """ 
+3595          self.xmlrpc_procedures[f.__name__] = f 
+3596          return f 
+
    3597   
+
    3598 -    def amfrpc(self, f): 
+
    3599          """ 
+3600          example:: 
+3601   
+3602              service = Service(globals()) 
+3603              @service.amfrpc 
+3604              def myfunction(a, b): 
+3605                  return a + b 
+3606              def call(): 
+3607                  return service() 
+3608   
+3609          The call it with:: 
+3610   
+3611              wget http://..../app/default/call/amfrpc/myfunction?a=hello&b=world 
+3612   
+3613          """ 
+3614          self.amfrpc_procedures[f.__name__] = f 
+3615          return f 
+
    3616   
+
    3617 -    def amfrpc3(self, domain='default'): 
+
    3618          """ 
+3619          example:: 
+3620   
+3621              service = Service(globals()) 
+3622              @service.amfrpc3('domain') 
+3623              def myfunction(a, b): 
+3624                  return a + b 
+3625              def call(): 
+3626                  return service() 
+3627   
+3628          The call it with:: 
+3629   
+3630              wget http://..../app/default/call/amfrpc3/myfunction?a=hello&b=world 
+3631   
+3632          """ 
+3633          if not isinstance(domain, str): 
+3634              raise SyntaxError, "AMF3 requires a domain for function" 
+3635   
+3636          def _amfrpc3(f): 
+3637              if domain: 
+3638                  self.amfrpc3_procedures[domain+'.'+f.__name__] = f 
+3639              else: 
+3640                  self.amfrpc3_procedures[f.__name__] = f 
+3641              return f 
+
    3642          return _amfrpc3 
+
    3643   
+
    3644 -    def soap(self, name=None, returns=None, args=None,doc=None): 
+
    3645          """ 
+3646          example:: 
+3647   
+3648              service = Service(globals()) 
+3649              @service.soap('MyFunction',returns={'result':int},args={'a':int,'b':int,}) 
+3650              def myfunction(a, b): 
+3651                  return a + b 
+3652              def call(): 
+3653                  return service() 
+3654   
+3655          The call it with:: 
+3656   
+3657              from gluon.contrib.pysimplesoap.client import SoapClient 
+3658              client = SoapClient(wsdl="http://..../app/default/call/soap?WSDL") 
+3659              response = client.MyFunction(a=1,b=2) 
+3660              return response['result'] 
+3661   
+3662          Exposes online generated documentation and xml example messages at: 
+3663          - http://..../app/default/call/soap 
+3664          """ 
+3665   
+3666          def _soap(f): 
+3667              self.soap_procedures[name or f.__name__] = f, returns, args, doc 
+3668              return f 
+
    3669          return _soap 
+3670   
+
    3671 -    def serve_run(self, args=None): 
+
    3672          request = current.request 
+3673          if not args: 
+3674              args = request.args 
+3675          if args and args[0] in self.run_procedures: 
+3676              return str(universal_caller(self.run_procedures[args[0]], 
+3677                                          *args[1:], **dict(request.vars))) 
+3678          self.error() 
+
    3679   
+
    3680 -    def serve_csv(self, args=None): 
+
    3681          request = current.request 
+3682          response = current.response 
+3683          response.headers['Content-Type'] = 'text/x-csv' 
+3684          if not args: 
+3685              args = request.args 
+3686   
+3687          def none_exception(value): 
+3688              if isinstance(value, unicode): 
+3689                  return value.encode('utf8') 
+3690              if hasattr(value, 'isoformat'): 
+3691                  return value.isoformat()[:19].replace('T', ' ') 
+3692              if value == None: 
+3693                  return '<NULL>' 
+3694              return value 
+
    3695          if args and args[0] in self.run_procedures: 
+3696              r = universal_caller(self.run_procedures[args[0]], 
+3697                                   *args[1:], **dict(request.vars)) 
+3698              s = cStringIO.StringIO() 
+3699              if hasattr(r, 'export_to_csv_file'): 
+3700                  r.export_to_csv_file(s) 
+3701              elif r and isinstance(r[0], (dict, Storage)): 
+3702                  import csv 
+3703                  writer = csv.writer(s) 
+3704                  writer.writerow(r[0].keys()) 
+3705                  for line in r: 
+3706                      writer.writerow([none_exception(v) \ 
+3707                                       for v in line.values()]) 
+3708              else: 
+3709                  import csv 
+3710                  writer = csv.writer(s) 
+3711                  for line in r: 
+3712                      writer.writerow(line) 
+3713              return s.getvalue() 
+3714          self.error() 
+3715   
+
    3716 -    def serve_xml(self, args=None): 
+
    3717          request = current.request 
+3718          response = current.response 
+3719          response.headers['Content-Type'] = 'text/xml' 
+3720          if not args: 
+3721              args = request.args 
+3722          if args and args[0] in self.run_procedures: 
+3723              s = universal_caller(self.run_procedures[args[0]], 
+3724                                   *args[1:], **dict(request.vars)) 
+3725              if hasattr(s, 'as_list'): 
+3726                  s = s.as_list() 
+3727              return serializers.xml(s) 
+3728          self.error() 
+
    3729   
+
    3730 -    def serve_rss(self, args=None): 
+
    3731          request = current.request 
+3732          response = current.response 
+3733          if not args: 
+3734              args = request.args 
+3735          if args and args[0] in self.rss_procedures: 
+3736              feed = universal_caller(self.rss_procedures[args[0]], 
+3737                                      *args[1:], **dict(request.vars)) 
+3738          else: 
+3739              self.error() 
+3740          response.headers['Content-Type'] = 'application/rss+xml' 
+3741          return serializers.rss(feed) 
+
    3742   
+
    3743 -    def serve_json(self, args=None): 
+
    3744          request = current.request 
+3745          response = current.response 
+3746          response.headers['Content-Type'] = 'text/x-json' 
+3747          if not args: 
+3748              args = request.args 
+3749          d = dict(request.vars) 
+3750          if args and args[0] in self.json_procedures: 
+3751              s = universal_caller(self.json_procedures[args[0]],*args[1:],**d) 
+3752              if hasattr(s, 'as_list'): 
+3753                  s = s.as_list() 
+3754              return response.json(s) 
+3755          self.error() 
+
    3756   
+
    3757 -    class JsonRpcException(Exception): 
+
    3758 -        def __init__(self,code,info): 
+
    3759              self.code,self.info = code,info 
+
    3760   
+
    3761 -    def serve_jsonrpc(self): 
+
    3762          import contrib.simplejson as simplejson 
+3763          def return_response(id, result): 
+3764              return serializers.json({'version': '1.1', 
+3765                  'id': id, 'result': result, 'error': None}) 
+
    3766   
+3767          def return_error(id, code, message): 
+3768              return serializers.json({'id': id, 
+3769                                       'version': '1.1', 
+3770                                       'error': {'name': 'JSONRPCError', 
+3771                                          'code': code, 'message': message} 
+3772                                       }) 
+3773   
+3774          request = current.request 
+3775          methods = self.jsonrpc_procedures 
+3776          data = simplejson.loads(request.body.read()) 
+3777          id, method, params = data['id'], data['method'], data.get('params','') 
+3778          if not method in methods: 
+3779              return return_error(id, 100, 'method "%s" does not exist' % method) 
+3780          try: 
+3781              s = methods[method](*params) 
+3782              if hasattr(s, 'as_list'): 
+3783                  s = s.as_list() 
+3784              return return_response(id, s) 
+3785          except Service.JsonRpcException, e: 
+3786              return return_error(id, e.code, e.info) 
+3787          except BaseException: 
+3788              etype, eval, etb = sys.exc_info() 
+3789              return return_error(id, 100, '%s: %s' % (etype.__name__, eval)) 
+3790          except: 
+3791              etype, eval, etb = sys.exc_info() 
+3792              return return_error(id, 100, 'Exception %s: %s' % (etype, eval)) 
+3793   
+
    3794 -    def serve_xmlrpc(self): 
+
    3795          request = current.request 
+3796          response = current.response 
+3797          services = self.xmlrpc_procedures.values() 
+3798          return response.xmlrpc(request, services) 
+
    3799   
+
    3800 -    def serve_amfrpc(self, version=0): 
+
    3801          try: 
+3802              import pyamf 
+3803              import pyamf.remoting.gateway 
+3804          except: 
+3805              return "pyamf not installed or not in Python sys.path" 
+3806          request = current.request 
+3807          response = current.response 
+3808          if version == 3: 
+3809              services = self.amfrpc3_procedures 
+3810              base_gateway = pyamf.remoting.gateway.BaseGateway(services) 
+3811              pyamf_request = pyamf.remoting.decode(request.body) 
+3812          else: 
+3813              services = self.amfrpc_procedures 
+3814              base_gateway = pyamf.remoting.gateway.BaseGateway(services) 
+3815              context = pyamf.get_context(pyamf.AMF0) 
+3816              pyamf_request = pyamf.remoting.decode(request.body, context) 
+3817          pyamf_response = pyamf.remoting.Envelope(pyamf_request.amfVersion) 
+3818          for name, message in pyamf_request: 
+3819              pyamf_response[name] = base_gateway.getProcessor(message)(message) 
+3820          response.headers['Content-Type'] = pyamf.remoting.CONTENT_TYPE 
+3821          if version==3: 
+3822              return pyamf.remoting.encode(pyamf_response).getvalue() 
+3823          else: 
+3824              return pyamf.remoting.encode(pyamf_response, context).getvalue() 
+
    3825   
+
    3826 -    def serve_soap(self, version="1.1"): 
+
    3827          try: 
+3828              from contrib.pysimplesoap.server import SoapDispatcher 
+3829          except: 
+3830              return "pysimplesoap not installed in contrib" 
+3831          request = current.request 
+3832          response = current.response 
+3833          procedures = self.soap_procedures 
+3834   
+3835          location = "%s://%s%s" % ( 
+3836                          request.env.wsgi_url_scheme, 
+3837                          request.env.http_host, 
+3838                          URL(r=request,f="call/soap",vars={})) 
+3839          namespace = 'namespace' in response and response.namespace or location 
+3840          documentation = response.description or '' 
+3841          dispatcher = SoapDispatcher( 
+3842              name = response.title, 
+3843              location = location, 
+3844              action = location, # SOAPAction 
+3845              namespace = namespace, 
+3846              prefix='pys', 
+3847              documentation = documentation, 
+3848              ns = True) 
+3849          for method, (function, returns, args, doc) in procedures.items(): 
+3850              dispatcher.register_function(method, function, returns, args, doc) 
+3851          if request.env.request_method == 'POST': 
+3852              # Process normal Soap Operation 
+3853              response.headers['Content-Type'] = 'text/xml' 
+3854              return dispatcher.dispatch(request.body.read()) 
+3855          elif 'WSDL' in request.vars: 
+3856              # Return Web Service Description 
+3857              response.headers['Content-Type'] = 'text/xml' 
+3858              return dispatcher.wsdl() 
+3859          elif 'op' in request.vars: 
+3860              # Return method help webpage 
+3861              response.headers['Content-Type'] = 'text/html' 
+3862              method  = request.vars['op'] 
+3863              sample_req_xml, sample_res_xml, doc = dispatcher.help(method) 
+3864              body = [H1("Welcome to Web2Py SOAP webservice gateway"), 
+3865                      A("See all webservice operations", 
+3866                        _href=URL(r=request,f="call/soap",vars={})), 
+3867                      H2(method), 
+3868                      P(doc), 
+3869                      UL(LI("Location: %s" % dispatcher.location), 
+3870                         LI("Namespace: %s" % dispatcher.namespace), 
+3871                         LI("SoapAction: %s" % dispatcher.action), 
+3872                      ), 
+3873                      H3("Sample SOAP XML Request Message:"), 
+3874                      CODE(sample_req_xml,language="xml"), 
+3875                      H3("Sample SOAP XML Response Message:"), 
+3876                      CODE(sample_res_xml,language="xml"), 
+3877                      ] 
+3878              return {'body': body} 
+3879          else: 
+3880              # Return general help and method list webpage 
+3881              response.headers['Content-Type'] = 'text/html' 
+3882              body = [H1("Welcome to Web2Py SOAP webservice gateway"), 
+3883                      P(response.description), 
+3884                      P("The following operations are available"), 
+3885                      A("See WSDL for webservice description", 
+3886                        _href=URL(r=request,f="call/soap",vars={"WSDL":None})), 
+3887                      UL([LI(A("%s: %s" % (method, doc or ''), 
+3888                               _href=URL(r=request,f="call/soap",vars={'op': method}))) 
+3889                          for method, doc in dispatcher.list_methods()]), 
+3890                      ] 
+3891              return {'body': body} 
+
    3892   
+
    3893 -    def __call__(self): 
+
    3894          """ 
+3895          register services with: 
+3896          service = Service(globals()) 
+3897          @service.run 
+3898          @service.rss 
+3899          @service.json 
+3900          @service.jsonrpc 
+3901          @service.xmlrpc 
+3902          @service.jsonrpc 
+3903          @service.amfrpc 
+3904          @service.amfrpc3('domain') 
+3905          @service.soap('Method', returns={'Result':int}, args={'a':int,'b':int,}) 
+3906   
+3907          expose services with 
+3908   
+3909          def call(): return service() 
+3910   
+3911          call services with 
+3912          http://..../app/default/call/run?[parameters] 
+3913          http://..../app/default/call/rss?[parameters] 
+3914          http://..../app/default/call/json?[parameters] 
+3915          http://..../app/default/call/jsonrpc 
+3916          http://..../app/default/call/xmlrpc 
+3917          http://..../app/default/call/amfrpc 
+3918          http://..../app/default/call/amfrpc3 
+3919          http://..../app/default/call/soap 
+3920          """ 
+3921   
+3922          request = current.request 
+3923          if len(request.args) < 1: 
+3924              raise HTTP(404, "Not Found") 
+3925          arg0 = request.args(0) 
+3926          if arg0 == 'run': 
+3927              return self.serve_run(request.args[1:]) 
+3928          elif arg0 == 'rss': 
+3929              return self.serve_rss(request.args[1:]) 
+3930          elif arg0 == 'csv': 
+3931              return self.serve_csv(request.args[1:]) 
+3932          elif arg0 == 'xml': 
+3933              return self.serve_xml(request.args[1:]) 
+3934          elif arg0 == 'json': 
+3935              return self.serve_json(request.args[1:]) 
+3936          elif arg0 == 'jsonrpc': 
+3937              return self.serve_jsonrpc() 
+3938          elif arg0 == 'xmlrpc': 
+3939              return self.serve_xmlrpc() 
+3940          elif arg0 == 'amfrpc': 
+3941              return self.serve_amfrpc() 
+3942          elif arg0 == 'amfrpc3': 
+3943              return self.serve_amfrpc(3) 
+3944          elif arg0 == 'soap': 
+3945              return self.serve_soap() 
+3946          else: 
+3947              self.error() 
+
    3948   
+
    3949 -    def error(self): 
+
    3950          raise HTTP(404, "Object does not exist") 
+
    3951   
+3952   
+
    3953 -def completion(callback): 
+
    3954      """ 
+3955      Executes a task on completion of the called action. For example: 
+3956   
+3957          from gluon.tools import completion 
+3958          @completion(lambda d: logging.info(repr(d))) 
+3959          def index(): 
+3960              return dict(message='hello') 
+3961   
+3962      It logs the output of the function every time input is called. 
+3963      The argument of completion is executed in a new thread. 
+3964      """ 
+3965      def _completion(f): 
+3966          def __completion(*a,**b): 
+3967              d = None 
+3968              try: 
+3969                  d = f(*a,**b) 
+3970                  return d 
+3971              finally: 
+3972                  thread.start_new_thread(callback,(d,)) 
+
    3973          return __completion 
+3974      return _completion 
+3975   
+
    3976 -def prettydate(d,T=lambda x:x): 
+
    3977      try: 
+3978          dt = datetime.datetime.now() - d 
+3979      except: 
+3980          return '' 
+3981      if dt.days >= 2*365: 
+3982          return T('%d years ago') % int(dt.days / 365) 
+3983      elif dt.days >= 365: 
+3984          return T('1 year ago') 
+3985      elif dt.days >= 60: 
+3986          return T('%d months ago') % int(dt.days / 30) 
+3987      elif dt.days > 21: 
+3988          return T('1 month ago') 
+3989      elif dt.days >= 14: 
+3990          return T('%d weeks ago') % int(dt.days / 7) 
+3991      elif dt.days >= 7: 
+3992          return T('1 week ago') 
+3993      elif dt.days > 1: 
+3994          return T('%d days ago') % dt.days 
+3995      elif dt.days == 1: 
+3996          return T('1 day ago') 
+3997      elif dt.seconds >= 2*60*60: 
+3998          return T('%d hours ago') % int(dt.seconds / 3600) 
+3999      elif dt.seconds >= 60*60: 
+4000          return T('1 hour ago') 
+4001      elif dt.seconds >= 2*60: 
+4002          return T('%d minutes ago') % int(dt.seconds / 60) 
+4003      elif dt.seconds >= 60: 
+4004          return T('1 minute ago') 
+4005      elif dt.seconds > 1: 
+4006          return T('%d seconds ago') % dt.seconds 
+4007      elif dt.seconds == 1: 
+4008          return T('1 second ago') 
+4009      else: 
+4010          return T('now') 
+
    4011   
+
    4013      def f(): 
+4014          c=PluginManager() 
+4015          lock1.acquire() 
+4016          lock2.acquire() 
+4017          c.x=7 
+4018          lock1.release() 
+4019          lock2.release() 
+
    4020      lock1=thread.allocate_lock() 
+4021      lock2=thread.allocate_lock() 
+4022      lock1.acquire() 
+4023      thread.start_new_thread(f,()) 
+4024      a=PluginManager() 
+4025      a.x=5 
+4026      lock1.release() 
+4027      lock2.acquire() 
+4028      return a.x 
+4029   
+
    4030 -class PluginManager(object): 
+
    4031      """ 
+4032   
+4033      Plugin Manager is similar to a storage object but it is a single level singleton 
+4034      this means that multiple instances within the same thread share the same attributes 
+4035      Its constructor is also special. The first argument is the name of the plugin you are defining. 
+4036      The named arguments are parameters needed by the plugin with default values. 
+4037      If the parameters were previous defined, the old values are used. 
+4038   
+4039      For example: 
+4040   
+4041      ### in some general configuration file: 
+4042      >>> plugins = PluginManager() 
+4043      >>> plugins.me.param1=3 
+4044   
+4045      ### within the plugin model 
+4046      >>> _ = PluginManager('me',param1=5,param2=6,param3=7) 
+4047   
+4048      ### where the plugin is used 
+4049      >>> print plugins.me.param1 
+4050      3 
+4051      >>> print plugins.me.param2 
+4052      6 
+4053      >>> plugins.me.param3 = 8 
+4054      >>> print plugins.me.param3 
+4055      8 
+4056   
+4057      Here are some tests: 
+4058   
+4059      >>> a=PluginManager() 
+4060      >>> a.x=6 
+4061      >>> b=PluginManager('check') 
+4062      >>> print b.x 
+4063      6 
+4064      >>> b=PluginManager() # reset settings 
+4065      >>> print b.x 
+4066      <Storage {}> 
+4067      >>> b.x=7 
+4068      >>> print a.x 
+4069      7 
+4070      >>> a.y.z=8 
+4071      >>> print b.y.z 
+4072      8 
+4073      >>> test_thread_separation() 
+4074      5 
+4075      >>> plugins=PluginManager('me',db='mydb') 
+4076      >>> print plugins.me.db 
+4077      mydb 
+4078      >>> print 'me' in plugins 
+4079      True 
+4080      >>> print plugins.me.installed 
+4081      True 
+4082      """ 
+4083      instances = {} 
+
    4084 -    def __new__(cls,*a,**b): 
+
    4085          id = thread.get_ident() 
+4086          lock = thread.allocate_lock() 
+4087          try: 
+4088              lock.acquire() 
+4089              try: 
+4090                  return cls.instances[id] 
+4091              except KeyError: 
+4092                  instance = object.__new__(cls,*a,**b) 
+4093                  cls.instances[id] = instance 
+4094                  return instance 
+4095          finally: 
+4096              lock.release() 
+
    4097 -    def __init__(self,plugin=None,**defaults): 
+
    4098          if not plugin: 
+4099              self.__dict__.clear() 
+4100          settings = self.__getattr__(plugin) 
+4101          settings.installed = True 
+4102          [settings.update({key:value}) for key,value in defaults.items() if not key in settings] 
+
    4103 -    def __getattr__(self, key): 
+
    4104          if not key in self.__dict__: 
+4105              self.__dict__[key] = Storage() 
+4106          return self.__dict__[key] 
+
    4107 -    def keys(self): 
+
    4108          return self.__dict__.keys() 
+
    4109 -    def __contains__(self,key): 
+
    4110          return key in self.__dict__ 
+
    4111   
+4112  if __name__ == '__main__': 
+4113      import doctest 
+4114      doctest.testmod() 
+4115   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:08 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.tools.Auth-class.html
Index: applications/examples/static/epydoc/web2py.gluon.tools.Auth-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.tools.Auth-class.html
@@ -0,0 +1,1847 @@
+
+
+
+
+  web2py.gluon.tools.Auth
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module tools ::
+        Class Auth
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Auth
    source code

    
+
    +object --+
+         |
+        Auth
+
    
+
+
    
+
    +
+Class for authentication, authorization, role based access control.
+
+Includes:
+
+- registration and profile
+- login and logout
+- username and password retrieval
+- event logging
+- role creation and assignment
+- user defined group/role based permission
+
+Authentication Example::
+
+    from contrib.utils import *
+    mail=Mail()
+    mail.settings.server='smtp.gmail.com:587'
+    mail.settings.sender='you@somewhere.com'
+    mail.settings.login='username:password'
+    auth=Auth(globals(), db)
+    auth.settings.mailer=mail
+    # auth.settings....=...
+    auth.define_tables()
+    def authentication():
+        return dict(form=auth())
+
+exposes:
+
+- http://.../{application}/{controller}/authentication/login
+- http://.../{application}/{controller}/authentication/logout
+- http://.../{application}/{controller}/authentication/register
+- http://.../{application}/{controller}/authentication/verify_email
+- http://.../{application}/{controller}/authentication/retrieve_username
+- http://.../{application}/{controller}/authentication/retrieve_password
+- http://.../{application}/{controller}/authentication/reset_password
+- http://.../{application}/{controller}/authentication/profile
+- http://.../{application}/{controller}/authentication/change_password
+
+On registration a group with role=new_user.id is created
+and user is given membership of this group.
+
+You can create a group with::
+
+    group_id=auth.add_group('Manager', 'can access the manage action')
+    auth.add_permission(group_id, 'access to manage')
+
+Here "access to manage" is just a user defined string.
+You can give access to a user::
+
+    auth.add_membership(group_id, user_id)
+
+If user id is omitted, the logged in user is assumed
+
+Then you can decorate any action::
+
+    @auth.requires_permission('access to manage')
+    def manage():
+        return dict()
+
+You can restrict a permission to a specific table::
+
+    auth.add_permission(group_id, 'edit', db.sometable)
+    @auth.requires_permission('edit', db.sometable)
+
+Or to a specific record::
+
+    auth.add_permission(group_id, 'edit', db.sometable, 45)
+    @auth.requires_permission('edit', db.sometable, 45)
+
+If authorization is not granted calls::
+
+    auth.settings.on_failed_authorization
+
+Other options::
+
+    auth.settings.mailer=None
+    auth.settings.expiration=3600 # seconds
+
+    ...
+
+    ### these are messages that can be customized
+    ...
+
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    url(self,
+        f=1,
+        args=[],
+        vars={})
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        environment=1,
+        db=1,
+        controller='default',
+        cas_provider=1)
    
+      auth=Auth(globals(), db)...    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _get_user_id(self)
    
+      accessor for auth.user_id    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _HTTP(self,
+        *a,
+        **b)
    
+      only used in lambda: self._HTTP(404)    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self)
    
+      usage:    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    navbar(self,
+        prefix='Welcome',
+        action=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __get_migrate(self,
+        tablename,
+        migrate=True)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    define_tables(self,
+        username=True,
+        migrate=True,
+        fake_migrate=True)
    
+      to be called unless tables are defined manually    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    log_event(self,
+        description,
+        origin='auth')
    
+      usage:    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    get_or_create_user(self,
+        keys)
    
+      Used for alternate login methods:
+    If the user exists already then password is updated.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    basic(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    login_bare(self,
+        username,
+        password)
    
+      logins user    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    cas_login(self,
+        next=<function <lambda> at 0x26ba500>,
+        onvalidation=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>,
+        version=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    cas_validate(self,
+        version=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    login(self,
+        next=<function <lambda> at 0x26ba500>,
+        onvalidation=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>)
    
+      returns a login form
+
+..    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    logout(self,
+        next=<function <lambda> at 0x26ba500>,
+        onlogout=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>)
    
+      logout and redirects to login
+
+..    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    register(self,
+        next=<function <lambda> at 0x26ba500>,
+        onvalidation=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>)
    
+      returns a registration form
+
+..    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    is_logged_in(self)
    
+      checks if the user is logged in and returns True/False.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    verify_email(self,
+        next=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>)
    
+      action user to verify the registration email, XXXXXXXXXXXXXXXX
+
+..    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    retrieve_username(self,
+        next=<function <lambda> at 0x26ba500>,
+        onvalidation=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>)
    
+      returns a form to retrieve the user username
+(only if there is a username field)
+
+..    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    random_password(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    reset_password_deprecated(self,
+        next=<function <lambda> at 0x26ba500>,
+        onvalidation=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>)
    
+      returns a form to reset the user password (deprecated)
+
+..    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    reset_password(self,
+        next=<function <lambda> at 0x26ba500>,
+        onvalidation=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>)
    
+      returns a form to reset the user password
+
+..    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    request_reset_password(self,
+        next=<function <lambda> at 0x26ba500>,
+        onvalidation=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>)
    
+      returns a form to reset the user password
+
+..    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    retrieve_password(self,
+        next=<function <lambda> at 0x26ba500>,
+        onvalidation=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    change_password(self,
+        next=<function <lambda> at 0x26ba500>,
+        onvalidation=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>)
    
+      returns a form that lets the user change password
+
+..    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    profile(self,
+        next=<function <lambda> at 0x26ba500>,
+        onvalidation=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>)
    
+      returns a form that lets the user change his/her profile
+
+..    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    is_impersonating(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    impersonate(self,
+        user_id=<function <lambda> at 0x26ba500>)
    
+      usage: POST TO http://..../impersonate 
+      request.post_vars.user_id=<id> set request.post_vars.user_id to
+      0 to restore original user.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    groups(self)
    
+      displays the groups and their roles for the logged in user    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    not_authorized(self)
    
+      you can change the view for this page to make it look as you 
+      like    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    requires(self,
+        condition)
    
+      decorator that prevents access to action if not logged in    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    requires_login(self)
    
+      decorator that prevents access to action if not logged in    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    requires_membership(self,
+        role=1,
+        group_id=1)
    
+      decorator that prevents access to action if not logged in or if 
+      user logged in is not a member of group_id.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    requires_permission(self,
+        name,
+        table_name='',
+        record_id=0)
    
+      decorator that prevents access to action if not logged in or if 
+      user logged in is not a member of any group (role) that has 'name' 
+      access to 'table_name', 'record_id'.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    requires_signature(self)
    
+      decorator that prevents access to action if not logged in or if 
+      user logged in is not a member of group_id.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    add_group(self,
+        role,
+        description='')
    
+      creates a group associated to a role    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    del_group(self,
+        group_id)
    
+      deletes a group    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    id_group(self,
+        role)
    
+      returns the group_id of the group specified by the role    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    user_group(self,
+        user_id=1)
    
+      returns the group_id of the group uniquely associated to this user
+      i.e.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    has_membership(self,
+        group_id=1,
+        user_id=1,
+        role=1)
    
+      checks if user is member of group_id or role    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    add_membership(self,
+        group_id=1,
+        user_id=1,
+        role=1)
    
+      gives user_id membership of group_id or role if user_id==None than
+      user_id is that of current logged in user    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    del_membership(self,
+        group_id,
+        user_id=1,
+        role=1)
    
+      revokes membership from group_id to user_id if user_id==None than 
+      user_id is that of current logged in user    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    has_permission(self,
+        name='any',
+        table_name='',
+        record_id=0,
+        user_id=1,
+        group_id=1)
    
+      checks if user_id or current logged in user is member of a group 
+      that has 'name' permission on 'table_name' and 'record_id' if 
+      group_id is passed, it checks whether the group has the 
+      permission    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    add_permission(self,
+        group_id,
+        name='any',
+        table_name='',
+        record_id=0)
    
+      gives group_id 'name' access to 'table_name' and 'record_id'    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    del_permission(self,
+        group_id,
+        name='any',
+        table_name='',
+        record_id=0)
    
+      revokes group_id 'name' access to 'table_name' and 'record_id'    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    accessible_query(self,
+        name,
+        table,
+        user_id=1)
    
+      returns a query with all accessible records for user_id or the 
+      current logged in user this method does not work on GAE because uses 
+      JOIN and IN    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+       
+    
+        user_id
    
+      user.id or None
+    
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        environment=1,
+        db=1,
+        controller='default',
+        cas_provider=1)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
    +
+auth=Auth(globals(), db)
+
+- environment is there for legacy but unused (awful)
+- db has to be the database where to create tables for authentication
+
+
    
+  
    
+    
    Overrides:
+      object.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __call__(self)
+    
    (Call operator)
+  
    
+      		source code 
+    
    
+  
+  
    usage:
    
+  def authentication(): return dict(form=auth())
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    define_tables(self,
+        username=True,
+        migrate=True,
+        fake_migrate=True)
+  
    
+      		source code 
+    
    
+  
+  
    to be called unless tables are defined manually
    
+  usages:
+
    +   # defines all needed tables and table files
+   # 'myprefix_auth_user.table', ...
+   auth.define_tables(migrate='myprefix_')
+
+   # defines all needed tables without migration/table files
+   auth.define_tables(migrate=False)
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    log_event(self,
+        description,
+        origin='auth')
+  
    
+      		source code 
+    
    
+  
+  usage:
+
    +   auth.log_event(description='this happened', origin='auth')
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    get_or_create_user(self,
+        keys)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Used for alternate login methods:
+    If the user exists already then password is updated.
+    If the user doesn't yet exist, then they are created.
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    login(self,
+        next=<function <lambda> at 0x26ba500>,
+        onvalidation=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>)
+  
    
+      		source code 
+    
    
+  
+  
    +
+returns a login form
+
+.. method:: Auth.login([next=DEFAULT [, onvalidation=DEFAULT
+    [, onaccept=DEFAULT [, log=DEFAULT]]]])
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    logout(self,
+        next=<function <lambda> at 0x26ba500>,
+        onlogout=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>)
+  
    
+      		source code 
+    
    
+  
+  
    +
+logout and redirects to login
+
+.. method:: Auth.logout ([next=DEFAULT[, onlogout=DEFAULT[,
+    log=DEFAULT]]])
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    register(self,
+        next=<function <lambda> at 0x26ba500>,
+        onvalidation=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>)
+  
    
+      		source code 
+    
    
+  
+  
    +
+returns a registration form
+
+.. method:: Auth.register([next=DEFAULT [, onvalidation=DEFAULT
+    [, onaccept=DEFAULT [, log=DEFAULT]]]])
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    is_logged_in(self)
+  
    
+      		source code 
+    
    
+  
+  checks if the user is logged in and returns True/False. if so user is 
+  in auth.user as well as in session.auth.user
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    verify_email(self,
+        next=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>)
+  
    
+      		source code 
+    
    
+  
+  
    +
+action user to verify the registration email, XXXXXXXXXXXXXXXX
+
+.. method:: Auth.verify_email([next=DEFAULT [, onvalidation=DEFAULT
+    [, onaccept=DEFAULT [, log=DEFAULT]]]])
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    retrieve_username(self,
+        next=<function <lambda> at 0x26ba500>,
+        onvalidation=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>)
+  
    
+      		source code 
+    
    
+  
+  
    +
+returns a form to retrieve the user username
+(only if there is a username field)
+
+.. method:: Auth.retrieve_username([next=DEFAULT
+    [, onvalidation=DEFAULT [, onaccept=DEFAULT [, log=DEFAULT]]]])
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    reset_password_deprecated(self,
+        next=<function <lambda> at 0x26ba500>,
+        onvalidation=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>)
+  
    
+      		source code 
+    
    
+  
+  
    +
+returns a form to reset the user password (deprecated)
+
+.. method:: Auth.reset_password_deprecated([next=DEFAULT
+    [, onvalidation=DEFAULT [, onaccept=DEFAULT [, log=DEFAULT]]]])
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    reset_password(self,
+        next=<function <lambda> at 0x26ba500>,
+        onvalidation=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>)
+  
    
+      		source code 
+    
    
+  
+  
    +
+returns a form to reset the user password
+
+.. method:: Auth.reset_password([next=DEFAULT
+    [, onvalidation=DEFAULT [, onaccept=DEFAULT [, log=DEFAULT]]]])
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    request_reset_password(self,
+        next=<function <lambda> at 0x26ba500>,
+        onvalidation=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>)
+  
    
+      		source code 
+    
    
+  
+  
    +
+returns a form to reset the user password
+
+.. method:: Auth.reset_password([next=DEFAULT
+    [, onvalidation=DEFAULT [, onaccept=DEFAULT [, log=DEFAULT]]]])
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    change_password(self,
+        next=<function <lambda> at 0x26ba500>,
+        onvalidation=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>)
+  
    
+      		source code 
+    
    
+  
+  
    +
+returns a form that lets the user change password
+
+.. method:: Auth.change_password([next=DEFAULT[, onvalidation=DEFAULT[,
+    onaccept=DEFAULT[, log=DEFAULT]]]])
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    profile(self,
+        next=<function <lambda> at 0x26ba500>,
+        onvalidation=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>)
+  
    
+      		source code 
+    
    
+  
+  
    +
+returns a form that lets the user change his/her profile
+
+.. method:: Auth.profile([next=DEFAULT [, onvalidation=DEFAULT
+    [, onaccept=DEFAULT [, log=DEFAULT]]]])
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    impersonate(self,
+        user_id=<function <lambda> at 0x26ba500>)
+  
    
+      		source code 
+    
    
+  
+  
    usage: POST TO http://..../impersonate 
+  request.post_vars.user_id=<id> set request.post_vars.user_id to 0 
+  to restore original user.
    
+  requires impersonator is logged in and has_permission('impersonate', 
+  'auth_user', user_id)
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    requires_membership(self,
+        role=1,
+        group_id=1)
+  
    
+      		source code 
+    
    
+  
+  decorator that prevents access to action if not logged in or if user 
+  logged in is not a member of group_id. If role is provided instead of 
+  group_id then the group_id is calculated.
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    requires_signature(self)
+  
    
+      		source code 
+    
    
+  
+  decorator that prevents access to action if not logged in or if user 
+  logged in is not a member of group_id. If role is provided instead of 
+  group_id then the group_id is calculated.
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    user_group(self,
+        user_id=1)
+  
    
+      		source code 
+    
    
+  
+  returns the group_id of the group uniquely associated to this user 
+  i.e. role=user:[user_id]
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    accessible_query(self,
+        name,
+        table,
+        user_id=1)
+  
    
+      		source code 
+    
    
+  
+  
    returns a query with all accessible records for user_id or the current
+  logged in user this method does not work on GAE because uses JOIN and 
+  IN
    
+  example:
+
    +  db(auth.accessible_query('read', db.mytable)).select(db.mytable.ALL)
+
    
+  
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Property Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    user_id
    
+  user.id or None
+  
    
+    
    Get Method:
    
+    
    web2py.gluon.tools.Auth._get_user_id(self)
+        - accessor for auth.user_id
+    
    
+    
    Set Method:
    
+    
    +1
+
    
+
+        - PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+    
    Delete Method:
    
+    
    +1
+
    
+
+        - PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.tools.Crud-class.html
Index: applications/examples/static/epydoc/web2py.gluon.tools.Crud-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.tools.Crud-class.html
@@ -0,0 +1,756 @@
+
+
+
+
+  web2py.gluon.tools.Crud
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module tools ::
+        Class Crud
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Crud
    source code

    
+
    +object --+
+         |
+        Crud
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    url(self,
+        f=1,
+        args=[],
+        vars={})
    
+      this should point to the controller that exposes download and 
+      crud    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        environment,
+        db=1,
+        controller='default')
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    log_event(self,
+        message)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    has_permission(self,
+        name,
+        table,
+        record=0)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    tables(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    update(self,
+        table,
+        record,
+        next=<function <lambda> at 0x26ba500>,
+        onvalidation=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        ondelete=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>,
+        message=<function <lambda> at 0x26ba500>,
+        deletable=<function <lambda> at 0x26ba500>,
+        formname=<function <lambda> at 0x26ba500>)
    
+      ..    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    create(self,
+        table,
+        next=<function <lambda> at 0x26ba500>,
+        onvalidation=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>,
+        message=<function <lambda> at 0x26ba500>,
+        formname=<function <lambda> at 0x26ba500>)
    
+      ..    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    read(self,
+        table,
+        record)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    delete(self,
+        table,
+        record_id,
+        next=<function <lambda> at 0x26ba500>,
+        message=<function <lambda> at 0x26ba500>)
    
+      ..    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    rows(self,
+        table,
+        query=1,
+        fields=1,
+        orderby=1,
+        limitby=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    select(self,
+        table,
+        query=1,
+        fields=1,
+        orderby=1,
+        limitby=1,
+        headers={},
+        **attr)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    get_format(self,
+        field)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    get_query(self,
+        field,
+        op,
+        value,
+        refsearch=True)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    search(self,
+        *tables,
+        **args)
    
+      Creates a search form and its results for a table...    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    archive(form,
+        archive_table=1,
+        current_record='current_record')
    
+      If you have a table (db.mytable) that needs full revision history 
+      you can just do:    		
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        environment,
+        db=1,
+        controller='default')
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    archive(form,
+        archive_table=1,
+        current_record='current_record')
+    
    Static Method
+  
    
+      		source code 
+    
    
+  
+  If you have a table (db.mytable) that needs full revision history you 
+  can just do:
+
    +   form=crud.update(db.mytable,myrecord,onaccept=crud.archive)
+
    
+  
    crud.archive will define a new table "mytable_archive" and 
+  store the previous record in the newly created table including a 
+  reference to the current record.
    
+  If you want to access such table you need to define it yourself in a 
+  model:
+
    +   db.define_table('mytable_archive',
+       Field('current_record',db.mytable),
+       db.mytable)
+
    
+  Notice such table includes all fields of db.mytable plus one: 
+  current_record. crud.archive does not timestamp the stored record unless 
+  your original table has a fields like:
+
    +   db.define_table(...,
+       Field('saved_on','datetime',
+            default=request.now,update=request.now,writable=False),
+       Field('saved_by',auth.user,
+            default=auth.user_id,update=auth.user_id,writable=False),
+
    
+  
    there is nothing special about these fields since they are filled 
+  before the record is archived.
    
+  If you want to change the archive table name and the name of the 
+  reference field you can do, for example:
+
    +   db.define_table('myhistory',
+       Field('parent_record',db.mytable),
+       db.mytable)
+
    
+  and use it as:
+
    +   form=crud.update(db.mytable,myrecord,
+                    onaccept=lambda form:crud.archive(form,
+                    archive_table=db.myhistory,
+                    current_record='parent_record'))
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    update(self,
+        table,
+        record,
+        next=<function <lambda> at 0x26ba500>,
+        onvalidation=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        ondelete=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>,
+        message=<function <lambda> at 0x26ba500>,
+        deletable=<function <lambda> at 0x26ba500>,
+        formname=<function <lambda> at 0x26ba500>)
+  
    
+      		source code 
+    
    
+  
+  
    +
+.. method:: Crud.update(table, record, [next=DEFAULT
+    [, onvalidation=DEFAULT [, onaccept=DEFAULT [, log=DEFAULT
+    [, message=DEFAULT[, deletable=DEFAULT]]]]]])
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    create(self,
+        table,
+        next=<function <lambda> at 0x26ba500>,
+        onvalidation=<function <lambda> at 0x26ba500>,
+        onaccept=<function <lambda> at 0x26ba500>,
+        log=<function <lambda> at 0x26ba500>,
+        message=<function <lambda> at 0x26ba500>,
+        formname=<function <lambda> at 0x26ba500>)
+  
    
+      		source code 
+    
    
+  
+  
    +
+.. method:: Crud.create(table, [next=DEFAULT [, onvalidation=DEFAULT
+    [, onaccept=DEFAULT [, log=DEFAULT[, message=DEFAULT]]]]])
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    delete(self,
+        table,
+        record_id,
+        next=<function <lambda> at 0x26ba500>,
+        message=<function <lambda> at 0x26ba500>)
+  
    
+      		source code 
+    
    
+  
+  
    +
+.. method:: Crud.delete(table, record_id, [next=DEFAULT
+    [, message=DEFAULT]])
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    search(self,
+        *tables,
+        **args)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Creates a search form and its results for a table
+Example usage:
+form, results = crud.search(db.test,
+                       queries = ['equals', 'not equal', 'contains'],
+                       query_labels={'equals':'Equals',
+                                     'not equal':'Not equal'},
+                       fields = ['id','children'],
+                       field_labels = {'id':'ID','children':'Children'},
+                       zero='Please choose',
+                       query = (db.test.id > 0)&(db.test.id != 3) )
+
+
    
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.tools.Mail-class.html
Index: applications/examples/static/epydoc/web2py.gluon.tools.Mail-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.tools.Mail-class.html
@@ -0,0 +1,529 @@
+
+
+
+
+  web2py.gluon.tools.Mail
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module tools ::
+        Class Mail
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Mail
    source code

    
+
    +object --+
+         |
+        Mail
+
    
+
+
    
+
    Class for configuring and sending emails with alternative text / html 
+  body, multiple attachments and encryption support
    
+  Works with SMTP and Google App Engine.

    
+
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Nested Classes[hide private]
    
+  
    
+       
+    
+        Attachment
    
+      Email attachment
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        server=1,
+        sender=1,
+        login=1,
+        tls=True)
    
+      Main Mail object
+
+Arguments::
+
+    server: SMTP server address in address:port notation
+    sender: sender email address
+    login: sender login name and password in login:password notation
+           or None if no authentication is required
+    tls: enables/disables encryption (True by default)
+
+In Google App Engine use::
+
+    server='gae'
+
+For sake of backward compatibility all fields are optional and default
+to None, however, to be able to send emails at least server and sender
+must be specified.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    send(self,
+        to,
+        subject='None',
+        message='None',
+        attachments=1,
+        cc=1,
+        bcc=1,
+        reply_to=1,
+        encoding='utf-8')
    
+      Sends an email using data specified in constructor
+
+Arguments::
+
+    to: list or tuple of receiver addresses; will also accept single
+        object
+    subject: subject of the email
+    message: email body text; depends on type of passed object:
+             if 2-list or 2-tuple is passed: first element will be
+             source of plain text while second of html text;
+             otherwise: object will be the only source of plain text
+             and html source will be set to None;
+             If text or html source is:
+             None: content part will be ignored,
+             string: content part will be set to it,
+             file-like object: content part will be fetched from
+                               it using it's read() method
+    attachments: list or tuple of Mail.Attachment objects; will also
+                 accept single object
+    cc: list or tuple of carbon copy receiver addresses; will also
+        accept single object
+    bcc: list or tuple of blind carbon copy receiver addresses; will
+        also accept single object
+    reply_to: address to which reply should be composed
+    encoding: encoding of all strings passed to this method (including
+              message bodies)
+
+Examples::
+
+    #Send plain text message to single address:
+    mail.send('you@example.com',
+              'Message subject',
+              'Plain text body of the message')
+
+    #Send html message to single address:
+    mail.send('you@example.com',
+              'Message subject',
+              '<html>Plain text body of the message</html>')
+
+    #Send text and html message to three addresses (two in cc):
+    mail.send('you@example.com',
+              'Message subject',
+              ('Plain text body', '<html>html body</html>'),
+              cc=['other1@example.com', 'other2@example.com'])
+
+    #Send html only message with image attachment available from
+    the message by 'photo' content id:
+    mail.send('you@example.com',
+              'Message subject',
+              (None, '<html><img src="cid:photo" /></html>'),
+              Mail.Attachment('/path/to/photo.jpg'
+                              content_id='photo'))
+
+    #Send email with two attachments and no body text
+    mail.send('you@example.com,
+              'Message subject',
+              None,
+              [Mail.Attachment('/path/to/fist.file'),
+               Mail.Attachment('/path/to/second.file')])
+
+Returns True on success, False on failure.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        server=1,
+        sender=1,
+        login=1,
+        tls=True)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Main Mail object
+
+Arguments::
+
+    server: SMTP server address in address:port notation
+    sender: sender email address
+    login: sender login name and password in login:password notation
+           or None if no authentication is required
+    tls: enables/disables encryption (True by default)
+
+In Google App Engine use::
+
+    server='gae'
+
+For sake of backward compatibility all fields are optional and default
+to None, however, to be able to send emails at least server and sender
+must be specified. They are available under following fields:
+
+    mail.settings.server
+    mail.settings.sender
+    mail.settings.login
+
+When server is 'logging', email is logged but not sent (debug mode)
+
+Optionally you can use PGP encryption or X509:
+
+    mail.settings.cipher_type = None
+    mail.settings.sign = True
+    mail.settings.sign_passphrase = None
+    mail.settings.encrypt = True
+    mail.settings.x509_sign_keyfile = None
+    mail.settings.x509_sign_certfile = None
+    mail.settings.x509_crypt_certfiles = None
+
+    cipher_type       : None
+                        gpg - need a python-pyme package and gpgme lib
+                        x509 - smime
+    sign              : sign the message (True or False)
+    sign_passphrase   : passphrase for key signing
+    encrypt           : encrypt the message
+                     ... x509 only ...
+    x509_sign_keyfile : the signers private key filename (PEM format)
+    x509_sign_certfile: the signers certificate filename (PEM format)
+    x509_crypt_certfiles: the certificates file to encrypt the messages
+                          with can be a file name or a list of
+                          file names (PEM format)
+
+Examples::
+
+    #Create Mail object with authentication data for remote server:
+    mail = Mail('example.com:25', 'me@example.com', 'me:password')
+
+
    
+  
    
+    
    Overrides:
+      object.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    send(self,
+        to,
+        subject='None',
+        message='None',
+        attachments=1,
+        cc=1,
+        bcc=1,
+        reply_to=1,
+        encoding='utf-8')
+  
    
+      		source code 
+    
    
+  
+  
    +
+Sends an email using data specified in constructor
+
+Arguments::
+
+    to: list or tuple of receiver addresses; will also accept single
+        object
+    subject: subject of the email
+    message: email body text; depends on type of passed object:
+             if 2-list or 2-tuple is passed: first element will be
+             source of plain text while second of html text;
+             otherwise: object will be the only source of plain text
+             and html source will be set to None;
+             If text or html source is:
+             None: content part will be ignored,
+             string: content part will be set to it,
+             file-like object: content part will be fetched from
+                               it using it's read() method
+    attachments: list or tuple of Mail.Attachment objects; will also
+                 accept single object
+    cc: list or tuple of carbon copy receiver addresses; will also
+        accept single object
+    bcc: list or tuple of blind carbon copy receiver addresses; will
+        also accept single object
+    reply_to: address to which reply should be composed
+    encoding: encoding of all strings passed to this method (including
+              message bodies)
+
+Examples::
+
+    #Send plain text message to single address:
+    mail.send('you@example.com',
+              'Message subject',
+              'Plain text body of the message')
+
+    #Send html message to single address:
+    mail.send('you@example.com',
+              'Message subject',
+              '<html>Plain text body of the message</html>')
+
+    #Send text and html message to three addresses (two in cc):
+    mail.send('you@example.com',
+              'Message subject',
+              ('Plain text body', '<html>html body</html>'),
+              cc=['other1@example.com', 'other2@example.com'])
+
+    #Send html only message with image attachment available from
+    the message by 'photo' content id:
+    mail.send('you@example.com',
+              'Message subject',
+              (None, '<html><img src="cid:photo" /></html>'),
+              Mail.Attachment('/path/to/photo.jpg'
+                              content_id='photo'))
+
+    #Send email with two attachments and no body text
+    mail.send('you@example.com,
+              'Message subject',
+              None,
+              [Mail.Attachment('/path/to/fist.file'),
+               Mail.Attachment('/path/to/second.file')])
+
+Returns True on success, False on failure.
+
+Before return, method updates two object's fields:
+self.result: return value of smtplib.SMTP.sendmail() or GAE's
+             mail.send_mail() method
+self.error: Exception message or None if above was successful
+
+
    
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.tools.Mail.Attachment-class.html
Index: applications/examples/static/epydoc/web2py.gluon.tools.Mail.Attachment-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.tools.Mail.Attachment-class.html
@@ -0,0 +1,311 @@
+
+
+
+
+  web2py.gluon.tools.Mail.Attachment
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module tools ::
+        Class Mail ::
+        Class Attachment
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Attachment
    source code

    
+
    +email.message.Message --+    
+                        |    
+ email.mime.base.MIMEBase --+
+                            |
+                           Mail.Attachment
+
    
+
+
    
+
    Email attachment
    
+  Arguments:
+
    +   payload: path to file or file-like object with read() method
+   filename: name of the attachment stored in message; if set to
+             None, it will be fetched from payload path; file-like
+             object payload must have explicit filename specified
+   content_id: id of the attachment; automatically contained within
+               < and >
+   content_type: content type of the attachment; if set to None,
+                 it will be fetched from filename using gluon.contenttype
+                 module
+   encoding: encoding of all strings passed to this function (except
+             attachment body)
+
    
+  
    Content ID is used to identify attachments within the html body; in 
+  example, attached image with content ID 'photo' may be used in html 
+  message as a source of img tag <img src="cid:photo" 
+  />.
    
+  Examples:
+
    +   #Create attachment from text file:
+   attachment = Mail.Attachment('/path/to/file.txt')
+
+   Content-Type: text/plain
+   MIME-Version: 1.0
+   Content-Disposition: attachment; filename="file.txt"
+   Content-Transfer-Encoding: base64
+
+   SOMEBASE64CONTENT=
+
+   #Create attachment from image file with custom filename and cid:
+   attachment = Mail.Attachment('/path/to/file.png',
+                                    filename='photo.png',
+                                    content_id='photo')
+
+   Content-Type: image/png
+   MIME-Version: 1.0
+   Content-Disposition: attachment; filename="photo.png"
+   Content-Id: <photo>
+   Content-Transfer-Encoding: base64
+
+   SOMEOTHERBASE64CONTENT=
+


    
+
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        payload,
+        filename=1,
+        content_id=1,
+        content_type=1,
+        encoding='utf-8')
    
+      This constructor adds a Content-Type: and a MIME-Version: 
+      header.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from email.message.Message:
+      __contains__,
+      __delitem__,
+      __getitem__,
+      __len__,
+      __setitem__,
+      __str__,
+      add_header,
+      as_string,
+      attach,
+      del_param,
+      get,
+      get_all,
+      get_boundary,
+      get_charset,
+      get_charsets,
+      get_content_charset,
+      get_content_maintype,
+      get_content_subtype,
+      get_content_type,
+      get_default_type,
+      get_filename,
+      get_param,
+      get_params,
+      get_payload,
+      get_unixfrom,
+      has_key,
+      is_multipart,
+      items,
+      keys,
+      replace_header,
+      set_boundary,
+      set_charset,
+      set_default_type,
+      set_param,
+      set_payload,
+      set_type,
+      set_unixfrom,
+      values,
+      walk
+      
    
+    
        
    Inherited from email.message.Message (private):
+      _get_params_preserve
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        payload,
+        filename=1,
+        content_id=1,
+        content_type=1,
+        encoding='utf-8')
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
    This constructor adds a Content-Type: and a MIME-Version: header.
    
+  The Content-Type: header is taken from the _maintype and _subtype 
+  arguments.  Additional parameters for this header are taken from the 
+  keyword arguments.
+  
    
+    
    Overrides:
+      email.mime.base.MIMEBase.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.tools.PluginManager-class.html
Index: applications/examples/static/epydoc/web2py.gluon.tools.PluginManager-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.tools.PluginManager-class.html
@@ -0,0 +1,430 @@
+
+
+
+
+  web2py.gluon.tools.PluginManager
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module tools ::
+        Class PluginManager
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class PluginManager
    source code

    
+
    +object --+
+         |
+        PluginManager
+
    
+
+
    
+
    Plugin Manager is similar to a storage object but it is a single level
+  singleton this means that multiple instances within the same thread share
+  the same attributes Its constructor is also special. The first argument 
+  is the name of the plugin you are defining. The named arguments are 
+  parameters needed by the plugin with default values. If the parameters 
+  were previous defined, the old values are used.
    
+  
    For example:
    
+  
    ### in some general configuration file: >>> plugins = 
+  PluginManager() >>> plugins.me.param1=3
    
+  
    ### within the plugin model >>> _ = 
+  PluginManager('me',param1=5,param2=6,param3=7)
    
+  
    ### where the plugin is used >>> print plugins.me.param1 3 
+  >>> print plugins.me.param2 6 >>> plugins.me.param3 = 8
+  >>> print plugins.me.param3 8
    
+  Here are some tests:
+
    +>>> a=PluginManager()
+>>> a.x=6
+>>> b=PluginManager('check')
+>>> print b.x
+6
+>>> b=PluginManager() # reset settings
+>>> print b.x
+<Storage {}>
+>>> b.x=7
+>>> print a.x
+7
+>>> a.y.z=8
+>>> print b.y.z
+8
+>>> test_thread_separation()
+5
+>>> plugins=PluginManager('me',db='mydb')
+>>> print plugins.me.db
+mydb
+>>> print 'me' in plugins
+True
+>>> print plugins.me.installed
+True


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        plugin=1,
+        **defaults)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __getattr__(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    keys(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __contains__(self,
+        key)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __new__(cls,
+        *a,
+        **b)
    
+      Returns:
+a new object with type S, a subtype of T    		
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        instances = {}
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __new__(cls,
+        *a,
+        **b)
+    
    Static Method
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Returns:
    
+        
    +a new object with type S, a subtype of T
+
+
    
+    
    Overrides:
+      object.__new__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        plugin=1,
+        **defaults)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:01 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.tools.Recaptcha-class.html
Index: applications/examples/static/epydoc/web2py.gluon.tools.Recaptcha-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.tools.Recaptcha-class.html
@@ -0,0 +1,419 @@
+
+
+
+
+  web2py.gluon.tools.Recaptcha
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module tools ::
+        Class Recaptcha
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Recaptcha
    source code

    
+
    +             object --+        
+                      |        
+gluon.html.XmlComponent --+    
+                          |    
+             gluon.html.DIV --+
+                              |
+                             Recaptcha
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        request,
+        public_key='',
+        private_key='',
+        use_ssl=True,
+        error=1,
+        error_message='invalid',
+        label='Verify:',
+        options='')
    
+      :param *components: any components that should be nested in this 
+      element :param **attributes: any attributes you want to give to this 
+      element    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _validate(self)
    
+      nothing to validate yet.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    xml(self)
    
+      generates the xml for this component.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from gluon.html.DIV:
+      __delitem__,
+      __getitem__,
+      __len__,
+      __nonzero__,
+      __setitem__,
+      __str__,
+      append,
+      element,
+      elements,
+      flatten,
+      insert,
+      sibling,
+      siblings,
+      update
+      
    
+    
        
    Inherited from gluon.html.DIV (private):
+      _fixup,
+      _postprocessing,
+      _setnode,
+      _traverse,
+      _wrap_components,
+      _xml
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        API_SSL_SERVER = 'https://www.google.com/recaptcha/api'
+    
    
+       
+    
+        API_SERVER = 'http://www.google.com/recaptcha/api'
+    
    
+       
+    
+        VERIFY_SERVER = 'http://www.google.com/recaptcha/api/verify'
+    
    
+    
    Inherited from gluon.html.DIV:
+      regex_attr,
+      regex_class,
+      regex_id,
+      regex_tag,
+      tag
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        request,
+        public_key='',
+        private_key='',
+        use_ssl=True,
+        error=1,
+        error_message='invalid',
+        label='Verify:',
+        options='')
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
    :param *components: any components that should be nested in this 
+  element :param **attributes: any attributes you want to give to this 
+  element
    
+  :raises SyntaxError: when a stand alone tag receives components
+  
    
+    
    Overrides:
+      gluon.html.DIV.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    _validate(self)
+  
    
+      		source code 
+    
    
+  
+  nothing to validate yet. May be overridden by subclasses
+  
    
+    
    Overrides:
+      gluon.html.DIV._validate
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    xml(self)
+  
    
+      		source code 
+    
    
+  
+  generates the xml for this component.
+  
    
+    
    Overrides:
+      gluon.html.DIV.xml
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.tools.Service-class.html
Index: applications/examples/static/epydoc/web2py.gluon.tools.Service-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.tools.Service-class.html
@@ -0,0 +1,1007 @@
+
+
+
+
+  web2py.gluon.tools.Service
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module tools ::
+        Class Service
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Service
    source code

    
+
    +object --+
+         |
+        Service
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Nested Classes[hide private]
    
+  
    
+       
+    
+        JsonRpcException
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        environment=1)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    run(self,
+        f)
    
+      example:    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    csv(self,
+        f)
    
+      example:    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    xml(self,
+        f)
    
+      example:    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    rss(self,
+        f)
    
+      example:    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    json(self,
+        f)
    
+      example:    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    jsonrpc(self,
+        f)
    
+      example:    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    xmlrpc(self,
+        f)
    
+      example:    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    amfrpc(self,
+        f)
    
+      example:    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    amfrpc3(self,
+        domain='default')
    
+      example:    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    soap(self,
+        name=1,
+        returns=1,
+        args=1,
+        doc=1)
    
+      example::...    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    serve_run(self,
+        args=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    serve_csv(self,
+        args=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    serve_xml(self,
+        args=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    serve_rss(self,
+        args=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    serve_json(self,
+        args=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    serve_jsonrpc(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    serve_xmlrpc(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    serve_amfrpc(self,
+        version=0)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    serve_soap(self,
+        version='1.1')
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self)
    
+      register services with: service = Service(globals()) @service.run 
+      @service.rss @service.json @service.jsonrpc @service.xmlrpc 
+      @service.jsonrpc @service.amfrpc @service.amfrpc3('domain') 
+      @service.soap('Method', returns={'Result':int}, 
+      args={'a':int,'b':int,})    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    error(self)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        environment=1)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    run(self,
+        f)
+  
    
+      		source code 
+    
    
+  
+  example:
+
    +   service = Service(globals())
+   @service.run
+   def myfunction(a, b):
+       return a + b
+   def call():
+       return service()
+
    
+  Then call it with:
+
    +   wget http://..../app/default/call/run/myfunction?a=3&b=4
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    csv(self,
+        f)
+  
    
+      		source code 
+    
    
+  
+  example:
+
    +   service = Service(globals())
+   @service.csv
+   def myfunction(a, b):
+       return a + b
+   def call():
+       return service()
+
    
+  Then call it with:
+
    +   wget http://..../app/default/call/csv/myfunction?a=3&b=4
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    xml(self,
+        f)
+  
    
+      		source code 
+    
    
+  
+  example:
+
    +   service = Service(globals())
+   @service.xml
+   def myfunction(a, b):
+       return a + b
+   def call():
+       return service()
+
    
+  Then call it with:
+
    +   wget http://..../app/default/call/xml/myfunction?a=3&b=4
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    rss(self,
+        f)
+  
    
+      		source code 
+    
    
+  
+  example:
+
    +   service = Service(globals())
+   @service.rss
+   def myfunction():
+       return dict(title=..., link=..., description=...,
+           created_on=..., entries=[dict(title=..., link=...,
+               description=..., created_on=...])
+   def call():
+       return service()
+
    
+  Then call it with:
+
    +   wget http://..../app/default/call/rss/myfunction
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    json(self,
+        f)
+  
    
+      		source code 
+    
    
+  
+  example:
+
    +   service = Service(globals())
+   @service.json
+   def myfunction(a, b):
+       return [{a: b}]
+   def call():
+       return service()
+
    
+  Then call it with:
+
    +   wget http://..../app/default/call/json/myfunction?a=hello&b=world
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    jsonrpc(self,
+        f)
+  
    
+      		source code 
+    
    
+  
+  example:
+
    +   service = Service(globals())
+   @service.jsonrpc
+   def myfunction(a, b):
+       return a + b
+   def call():
+       return service()
+
    
+  Then call it with:
+
    +   wget http://..../app/default/call/jsonrpc/myfunction?a=hello&b=world
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    xmlrpc(self,
+        f)
+  
    
+      		source code 
+    
    
+  
+  example:
+
    +   service = Service(globals())
+   @service.xmlrpc
+   def myfunction(a, b):
+       return a + b
+   def call():
+       return service()
+
    
+  The call it with:
+
    +   wget http://..../app/default/call/xmlrpc/myfunction?a=hello&b=world
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    amfrpc(self,
+        f)
+  
    
+      		source code 
+    
    
+  
+  example:
+
    +   service = Service(globals())
+   @service.amfrpc
+   def myfunction(a, b):
+       return a + b
+   def call():
+       return service()
+
    
+  The call it with:
+
    +   wget http://..../app/default/call/amfrpc/myfunction?a=hello&b=world
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    amfrpc3(self,
+        domain='default')
+  
    
+      		source code 
+    
    
+  
+  example:
+
    +   service = Service(globals())
+   @service.amfrpc3('domain')
+   def myfunction(a, b):
+       return a + b
+   def call():
+       return service()
+
    
+  The call it with:
+
    +   wget http://..../app/default/call/amfrpc3/myfunction?a=hello&b=world
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    soap(self,
+        name=1,
+        returns=1,
+        args=1,
+        doc=1)
+  
    
+      		source code 
+    
    
+  
+  
    +
+example::
+
+    service = Service(globals())
+    @service.soap('MyFunction',returns={'result':int},args={'a':int,'b':int,})
+    def myfunction(a, b):
+        return a + b
+    def call():
+        return service()
+
+The call it with::
+
+    from gluon.contrib.pysimplesoap.client import SoapClient
+    client = SoapClient(wsdl="http://..../app/default/call/soap?WSDL")
+    response = client.MyFunction(a=1,b=2)
+    return response['result']
+
+Exposes online generated documentation and xml example messages at:
+- http://..../app/default/call/soap
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __call__(self)
+    
    (Call operator)
+  
    
+      		source code 
+    
    
+  
+  
    register services with: service = Service(globals()) @service.run 
+  @service.rss @service.json @service.jsonrpc @service.xmlrpc 
+  @service.jsonrpc @service.amfrpc @service.amfrpc3('domain') 
+  @service.soap('Method', returns={'Result':int}, 
+  args={'a':int,'b':int,})
    
+  
    expose services with
    
+  
    def call(): return service()
    
+  call services with http://..../app/default/call/run?[parameters] 
+  http://..../app/default/call/rss?[parameters] 
+  http://..../app/default/call/json?[parameters] 
+  http://..../app/default/call/jsonrpc http://..../app/default/call/xmlrpc 
+  http://..../app/default/call/amfrpc http://..../app/default/call/amfrpc3 
+  http://..../app/default/call/soap
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.tools.Service.JsonRpcException-class.html
Index: applications/examples/static/epydoc/web2py.gluon.tools.Service.JsonRpcException-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.tools.Service.JsonRpcException-class.html
@@ -0,0 +1,263 @@
+
+
+
+
+  web2py.gluon.tools.Service.JsonRpcException
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module tools ::
+        Class Service ::
+        Class JsonRpcException
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class JsonRpcException
    source code

    
+
    +              object --+        
+                       |        
+exceptions.BaseException --+    
+                           |    
+        exceptions.Exception --+
+                               |
+                              Service.JsonRpcException
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        code,
+        info)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from exceptions.Exception:
+      __new__
+      
    
+    
    Inherited from exceptions.BaseException:
+      __delattr__,
+      __getattribute__,
+      __getitem__,
+      __getslice__,
+      __reduce__,
+      __repr__,
+      __setattr__,
+      __setstate__,
+      __str__
+      
    
+    
    Inherited from object:
+      __hash__,
+      __reduce_ex__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from exceptions.BaseException:
+      args,
+      message
+      
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        code,
+        info)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      exceptions.Exception.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.utils-module.html
Index: applications/examples/static/epydoc/web2py.gluon.utils-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.utils-module.html
@@ -0,0 +1,402 @@
+
+
+
+
+  web2py.gluon.utils
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module utils
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module utils
    source code

    
+
    This file is part of the web2py Web Framework Copyrighted by Massimo 
+  Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)
    
+  This file specifically includes utilities for security.

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    md5_hash(text)
    
+      Generate a md5 hash with the given text    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    simple_hash(text,
+        digest_alg='md5')
    
+      Generates hash with the given text using the specified digest 
+      hashing algorithm    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    get_digest(value)
    
+      Returns a hashlib digest algorithm from a string    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    hmac_hash(value,
+        key,
+        digest_alg='md5',
+        salt=1)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    initialize_urandom()
    
+      This function and the web2py_uuid follow from the following 
+      discussion: 
+      http://groups.google.com/group/web2py-developers/browse_thread/thread/7fd5789a7da3f09    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    web2py_uuid()
    
+      This function follows from the following discussion: 
+      http://groups.google.com/group/web2py-developers/browse_thread/thread/7fd5789a7da3f09    		
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        logger = logging.getLogger("web2py")
+    
    
+       
+    
+        ctokens = [176, 173, 75, 184, 184, 169, 176, 173, 75, 184, 184...
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Function Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    initialize_urandom()
+  
    
+      		source code 
+    
    
+  
+  
    This function and the web2py_uuid follow from the following 
+  discussion: 
+  http://groups.google.com/group/web2py-developers/browse_thread/thread/7fd5789a7da3f09
    
+  
    At startup web2py compute a unique ID that identifies the machine by 
+  adding uuid.getnode() + int(time.time() * 1e3)
    
+  
    This is a 48-bit number. It converts the number into 16 8-bit tokens. 
+  It uses this value to initialize the entropy source ('/dev/urandom') and 
+  to seed random.
    
+  If os.random() is not supported, it falls back to using random and 
+  issues a warning.
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    web2py_uuid()
+  
    
+      		source code 
+    
    
+  
+  
    This function follows from the following discussion: 
+  http://groups.google.com/group/web2py-developers/browse_thread/thread/7fd5789a7da3f09
    
+  It works like uuid.uuid4 except that tries to use os.urandom() if 
+  possible and it XORs the output with the tokens uniquely associated with 
+  this machine.
+  
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Variables Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    ctokens
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +[176,
+ 173,
+ 75,
+ 184,
+ 184,
+ 169,
+ 176,
+ 173,
+...
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.utils-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.utils-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.utils-pysrc.html
@@ -0,0 +1,293 @@
+
+
+
+
+  web2py.gluon.utils
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module utils
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.utils
    
+
    +  1  #!/usr/bin/env python 
+  2  # -*- coding: utf-8 -*- 
+  3   
+  4  """ 
+  5  This file is part of the web2py Web Framework 
+  6  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+  7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+  8   
+  9  This file specifically includes utilities for security. 
+ 10  """ 
+ 11   
+ 12  import hashlib 
+ 13  import hmac 
+ 14  import uuid 
+ 15  import random 
+ 16  import time 
+ 17  import os 
+ 18  import logging 
+ 19   
+ 20  logger = logging.getLogger("web2py") 
+ 21   
+
     22 -def md5_hash(text): 
+
     23      """ Generate a md5 hash with the given text """ 
+ 24      return hashlib.md5(text).hexdigest() 
+
     25   
+
     26 -def simple_hash(text, digest_alg = 'md5'): 
+
     27      """ 
+ 28      Generates hash with the given text using the specified 
+ 29      digest hashing algorithm 
+ 30      """ 
+ 31      if not digest_alg: 
+ 32          raise RuntimeError, "simple_hash with digest_alg=None" 
+ 33      elif not isinstance(digest_alg,str): 
+ 34          h = digest_alg(text) 
+ 35      else: 
+ 36          h = hashlib.new(digest_alg) 
+ 37          h.update(text) 
+ 38      return h.hexdigest() 
+
     39   
+
     40 -def get_digest(value): 
+
     41      """ 
+ 42      Returns a hashlib digest algorithm from a string 
+ 43      """ 
+ 44      if not isinstance(value,str): 
+ 45          return value 
+ 46      value = value.lower() 
+ 47      if value == "md5": 
+ 48          return hashlib.md5 
+ 49      elif value == "sha1": 
+ 50          return hashlib.sha1 
+ 51      elif value == "sha224": 
+ 52          return hashlib.sha224 
+ 53      elif value == "sha256": 
+ 54          return hashlib.sha256 
+ 55      elif value == "sha384": 
+ 56          return hashlib.sha384 
+ 57      elif value == "sha512": 
+ 58          return hashlib.sha512 
+ 59      else: 
+ 60          raise ValueError("Invalid digest algorithm") 
+
     61   
+
     62 -def hmac_hash(value, key, digest_alg='md5', salt=None): 
+
     63      if ':' in key: 
+ 64          digest_alg, key = key.split(':') 
+ 65      digest_alg = get_digest(digest_alg) 
+ 66      d = hmac.new(key,value,digest_alg) 
+ 67      if salt: 
+ 68          d.update(str(salt)) 
+ 69      return d.hexdigest() 
+
     70   
+ 71   
+ 72  ### compute constant ctokens 
+
     73 -def initialize_urandom(): 
+
     74      """ 
+ 75      This function and the web2py_uuid follow from the following discussion: 
+ 76      http://groups.google.com/group/web2py-developers/browse_thread/thread/7fd5789a7da3f09 
+ 77   
+ 78      At startup web2py compute a unique ID that identifies the machine by adding 
+ 79      uuid.getnode() + int(time.time() * 1e3) 
+ 80   
+ 81      This is a 48-bit number. It converts the number into 16 8-bit tokens. 
+ 82      It uses this value to initialize the entropy source ('/dev/urandom') and to seed random. 
+ 83   
+ 84      If os.random() is not supported, it falls back to using random and issues a warning. 
+ 85      """ 
+ 86      node_id = uuid.getnode() 
+ 87      microseconds = int(time.time() * 1e6) 
+ 88      ctokens = [((node_id + microseconds) >> ((i%6)*8)) % 256 for i in range(16)] 
+ 89      random.seed(node_id + microseconds) 
+ 90      try: 
+ 91          os.urandom(1) 
+ 92          try: 
+ 93              # try to add process-specific entropy 
+ 94              frandom = open('/dev/urandom','wb') 
+ 95              try: 
+ 96                  frandom.write(''.join(chr(t) for t in ctokens)) 
+ 97              finally: 
+ 98                  frandom.close() 
+ 99          except IOError: 
+100              # works anyway 
+101              pass 
+102      except NotImplementedError: 
+103          logger.warning( 
+104  """Cryptographically secure session management is not possible on your system because 
+105  your system does not provide a cryptographically secure entropy source. 
+106  This is not specific to web2py; consider deploying on a different operating system.""") 
+107      return ctokens 
+
    108  ctokens = initialize_urandom() 
+109   
+
    110 -def web2py_uuid(): 
+
    111      """ 
+112      This function follows from the following discussion: 
+113      http://groups.google.com/group/web2py-developers/browse_thread/thread/7fd5789a7da3f09 
+114   
+115      It works like uuid.uuid4 except that tries to use os.urandom() if possible 
+116      and it XORs the output with the tokens uniquely associated with this machine. 
+117      """ 
+118      bytes = [random.randrange(256) for i in range(16)] 
+119      try: 
+120          ubytes = [ord(c) for c in os.urandom(16)] # use /dev/urandom if possible 
+121          bytes = [bytes[i] ^ ubytes[i] for i in range(16)] 
+122      except NotImplementedError: 
+123          pass 
+124      ## xor bytes with constant ctokens 
+125      bytes = ''.join(chr(c ^ ctokens[i]) for i,c in enumerate(bytes)) 
+126      return str(uuid.UUID(bytes=bytes, version=4)) 
+
    127   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:04 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators-module.html
Index: applications/examples/static/epydoc/web2py.gluon.validators-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators-module.html
@@ -0,0 +1,1034 @@
+
+
+
+
+  web2py.gluon.validators
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module validators
    source code

    
+
    This file is part of the web2py Web Framework Copyrighted by Massimo 
+  Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)
    
+  Thanks to ga2arch for help with IS_IN_DB and IS_NOT_IN_DB on GAE

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        Validator
    
+      Root for all validators, mainly for documentation purposes.
+    
    
+       
+    
+        IS_MATCH
    
+      example:
+    
    
+       
+    
+        IS_EQUAL_TO
    
+      example:
+    
    
+       
+    
+        IS_EXPR
    
+      example:
+    
    
+       
+    
+        IS_LENGTH
    
+      Checks if length of field's value fits between given 
+        boundaries.
+    
    
+       
+    
+        IS_IN_SET
    
+      example:
+    
    
+       
+    
+        IS_IN_DB
    
+      example:
+    
    
+       
+    
+        IS_NOT_IN_DB
    
+      example:
+    
    
+       
+    
+        IS_INT_IN_RANGE
    
+      Determine that the argument is (or can be represented as) an 
+        int, and that it falls within the specified range.
+    
    
+       
+    
+        IS_FLOAT_IN_RANGE
    
+      Determine that the argument is (or can be represented as) a 
+        float, and that it falls within the specified inclusive range.
+    
    
+       
+    
+        IS_DECIMAL_IN_RANGE
    
+      Determine that the argument is (or can be represented as) a 
+        Python Decimal, and that it falls within the specified inclusive 
+        range.
+    
    
+       
+    
+        IS_NOT_EMPTY
    
+      example:
+    
    
+       
+    
+        IS_ALPHANUMERIC
    
+      example:
+    
    
+       
+    
+        IS_EMAIL
    
+      Checks if field's value is a valid email address.
+    
    
+       
+    
+        IS_GENERIC_URL
    
+      Rejects a URL string if any of the following is true:
+   * The string is empty or None
+   * The string uses characters that are not allowed in a URL
+   * The URL scheme specified (if one is specified) is not valid
+
+Based on RFC 2396: http://www.faqs.org/rfcs/rfc2396.html
+
+This function only checks the URL's syntax.
+    
    
+       
+    
+        IS_HTTP_URL
    
+      Rejects a URL string if any of the following is true:
+   * The string is empty or None
+   * The string uses characters that are not allowed in a URL
+   * The string breaks any of the HTTP syntactic rules
+   * The URL scheme specified (if one is specified) is not 'http' or 'https'
+   * The top-level domain (if a host name is specified) does not exist
+
+Based on RFC 2616: http://www.faqs.org/rfcs/rfc2616.html
+
+This function only checks the URL's syntax.
+    
    
+       
+    
+        IS_URL
    
+      Rejects a URL string if any of the following is true:
+   * The string is empty or None
+   * The string uses characters that are not allowed in a URL
+   * The string breaks any of the HTTP syntactic rules
+   * The URL scheme specified (if one is specified) is not 'http' or 'https'
+   * The top-level domain (if a host name is specified) does not exist
+
+(These rules are based on RFC 2616: http://www.faqs.org/rfcs/rfc2616.html)
+
+This function only checks the URL's syntax.
+    
    
+       
+    
+        IS_TIME
    
+      example:
+    
    
+       
+    
+        IS_DATE
    
+      example:
+    
    
+       
+    
+        IS_DATETIME
    
+      example:
+    
    
+       
+    
+        IS_DATE_IN_RANGE
    
+      example:
+    
    
+       
+    
+        IS_DATETIME_IN_RANGE
    
+      example:
+    
    
+       
+    
+        IS_LIST_OF
+    
    
+       
+    
+        IS_LOWER
    
+      convert to lower case
+    
    
+       
+    
+        IS_UPPER
    
+      convert to upper case
+    
    
+       
+    
+        IS_SLUG
    
+      convert arbitrary text string to a slug
+    
    
+       
+    
+        IS_EMPTY_OR
    
+      dummy class for testing IS_EMPTY_OR
+    
    
+       
+    
+        IS_NULL_OR
    
+      dummy class for testing IS_EMPTY_OR
+    
    
+       
+    
+        CLEANUP
    
+      example:
+    
    
+       
+    
+        CRYPT
    
+      example:
+    
    
+       
+    
+        IS_STRONG
    
+      example:
+    
    
+       
+    
+        IS_IN_SUBSET
+    
    
+       
+    
+        IS_IMAGE
    
+      Checks if file uploaded through file input was saved in one of 
+        selected image formats and has dimensions (width and height) within
+        given boundaries.
+    
    
+       
+    
+        IS_UPLOAD_FILENAME
    
+      Checks if name and extension of file uploaded through file input matches
+given criteria.
+    
    
+       
+    
+        IS_IPV4
    
+      Checks if field's value is an IP version 4 address in decimal form.
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    translate(text)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    options_sorter(x,
+        y)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    is_empty(value,
+        empty_regex=1)
    
+      test empty field    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    escape_unicode(string)
    
+      Converts a unicode string into US-ASCII, using a simple conversion scheme.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    unicode_to_ascii_authority(authority)
    
+      Follows the steps in RFC 3490, Section 4 to convert a unicode authority
+string into its ASCII equivalent.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    unicode_to_ascii_url(url,
+        prepend_scheme)
    
+      Converts the inputed unicode url into a US-ASCII equivalent.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    urlify(value,
+        maxlen=80,
+        keep_underscores=True)
    
+      Convert incoming string to a simplified ASCII subset.    		
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        regex1 = re.compile(r'[\w_]+\.[\w_]+')
+    
    
+       
+    
+        regex2 = re.compile(r'%\((?P<name>[^\)]+)\)s')
+    
    
+       
+    
+        official_url_schemes = ['aaa', 'aaas', 'acap', 'cap', 'cid', '...
+    
    
+       
+    
+        unofficial_url_schemes = ['about', 'adiumxtra', 'aim', 'afp', ...
+    
    
+       
+    
+        all_url_schemes = [None, 'aaa', 'aaas', 'acap', 'cap', 'cid', ...
+    
    
+       
+    
+        http_schemes = [None, 'http', 'https']
+    
    
+       
+    
+        url_split_regex = re.compile(r'^(([^:/\?#]+):)?(//([^/\?#]*))?...
+    
    
+       
+    
+        label_split_regex = re.compile(r'[\.\u3002\uff0e\uff61]')
+    
    
+       
+    
+        official_top_level_domains = ['ac', 'ad', 'ae', 'aero', 'af', ...
+    
    
+       
+    
+        regex_time = re.compile(r'((?P<h>[0-9]+))([^0-9 ]+(?P<m>[0-9 ]...
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Function Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    escape_unicode(string)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Converts a unicode string into US-ASCII, using a simple conversion scheme.
+Each unicode character that does not have a US-ASCII equivalent is
+converted into a URL escaped form based on its hexadecimal value.
+For example, the unicode character '\u4e86' will become the string '%4e%86'
+
+:param string: unicode string, the unicode string to convert into an
+    escaped US-ASCII form
+:returns: the US-ASCII escaped form of the inputted string
+:rtype: string
+
+@author: Jonathan Benn
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    unicode_to_ascii_authority(authority)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Follows the steps in RFC 3490, Section 4 to convert a unicode authority
+string into its ASCII equivalent.
+For example, u'www.Alliancefrançaise.nu' will be converted into
+'www.xn--alliancefranaise-npb.nu'
+
+:param authority: unicode string, the URL authority component to convert,
+                  e.g. u'www.Alliancefrançaise.nu'
+:returns: the US-ASCII character equivalent to the inputed authority,
+         e.g. 'www.xn--alliancefranaise-npb.nu'
+:rtype: string
+:raises Exception: if the function is not able to convert the inputed
+    authority
+
+@author: Jonathan Benn
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    unicode_to_ascii_url(url,
+        prepend_scheme)
+  
    
+      		source code 
+    
    
+  
+  
    +
+Converts the inputed unicode url into a US-ASCII equivalent. This function
+goes a little beyond RFC 3490, which is limited in scope to the domain name
+(authority) only. Here, the functionality is expanded to what was observed
+on Wikipedia on 2009-Jan-22:
+
+   Component    Can Use Unicode?
+   ---------    ----------------
+   scheme       No
+   authority    Yes
+   path         Yes
+   query        Yes
+   fragment     No
+
+The authority component gets converted to punycode, but occurrences of
+unicode in other components get converted into a pair of URI escapes (we
+assume 4-byte unicode). E.g. the unicode character U+4E2D will be
+converted into '%4E%2D'. Testing with Firefox v3.0.5 has shown that it can
+understand this kind of URI encoding.
+
+:param url: unicode string, the URL to convert from unicode into US-ASCII
+:param prepend_scheme: string, a protocol scheme to prepend to the URL if
+    we're having trouble parsing it.
+    e.g. "http". Input None to disable this functionality
+:returns: a US-ASCII equivalent of the inputed url
+:rtype: string
+
+@author: Jonathan Benn
+
+
    
+  
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    urlify(value,
+        maxlen=80,
+        keep_underscores=True)
+  
    
+      		source code 
+    
    
+  
+  Convert incoming string to a simplified ASCII subset. if 
+  (keep_underscores): underscores are retained in the string else: 
+  underscores are translated to hyphens (default)
+  
    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Variables Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    official_url_schemes
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +['aaa',
+ 'aaas',
+ 'acap',
+ 'cap',
+ 'cid',
+ 'crid',
+ 'data',
+ 'dav',
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    unofficial_url_schemes
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +['about',
+ 'adiumxtra',
+ 'aim',
+ 'afp',
+ 'aw',
+ 'callto',
+ 'chrome',
+ 'cvs',
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    all_url_schemes
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +[None,
+ 'aaa',
+ 'aaas',
+ 'acap',
+ 'cap',
+ 'cid',
+ 'crid',
+ 'data',
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    url_split_regex
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +re.compile(r'^(([^:/\?#]+):)?(//([^/\?#]*))?([^\?#]*)(\?([^#]*))?(#(.*\
+))?')
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    official_top_level_domains
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +['ac',
+ 'ad',
+ 'ae',
+ 'aero',
+ 'af',
+ 'ag',
+ 'ai',
+ 'al',
+...
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    regex_time
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +re.compile(r'((?P<h>[0-9]+))([^0-9 ]+(?P<m>[0-9 ]+))?([^0-9ap ]+(?P<s>\
+[0-9]*))?((?P<d>[ap]m))?')
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.validators-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators-pysrc.html
@@ -0,0 +1,4108 @@
+
+
+
+
+  web2py.gluon.validators
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.validators
    
+
    +   1  #!/bin/env python 
+   2  # -*- coding: utf-8 -*- 
+   3   
+   4  """ 
+   5  This file is part of the web2py Web Framework 
+   6  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+   7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+   8   
+   9  Thanks to ga2arch for help with IS_IN_DB and IS_NOT_IN_DB on GAE 
+  10  """ 
+  11   
+  12  import os 
+  13  import re 
+  14  import datetime 
+  15  import time 
+  16  import cgi 
+  17  import urllib 
+  18  import struct 
+  19  import decimal 
+  20  import unicodedata 
+  21  from cStringIO import StringIO 
+  22  from utils import simple_hash, hmac_hash 
+  23   
+  24  __all__ = [ 
+  25      'CLEANUP', 
+  26      'CRYPT', 
+  27      'IS_ALPHANUMERIC', 
+  28      'IS_DATE_IN_RANGE', 
+  29      'IS_DATE', 
+  30      'IS_DATETIME_IN_RANGE', 
+  31      'IS_DATETIME', 
+  32      'IS_DECIMAL_IN_RANGE', 
+  33      'IS_EMAIL', 
+  34      'IS_EMPTY_OR', 
+  35      'IS_EXPR', 
+  36      'IS_FLOAT_IN_RANGE', 
+  37      'IS_IMAGE', 
+  38      'IS_IN_DB', 
+  39      'IS_IN_SET', 
+  40      'IS_INT_IN_RANGE', 
+  41      'IS_IPV4', 
+  42      'IS_LENGTH', 
+  43      'IS_LIST_OF', 
+  44      'IS_LOWER', 
+  45      'IS_MATCH', 
+  46      'IS_EQUAL_TO', 
+  47      'IS_NOT_EMPTY', 
+  48      'IS_NOT_IN_DB', 
+  49      'IS_NULL_OR', 
+  50      'IS_SLUG', 
+  51      'IS_STRONG', 
+  52      'IS_TIME', 
+  53      'IS_UPLOAD_FILENAME', 
+  54      'IS_UPPER', 
+  55      'IS_URL', 
+  56      ] 
+  57   
+
      58 -def translate(text): 
+
      59      if isinstance(text,(str,unicode)): 
+  60          from globals import current 
+  61          if hasattr(current,'T'): 
+  62              return current.T(text) 
+  63      return text 
+
      64   
+
      65 -def options_sorter(x,y): 
+
      66      return (str(x[1]).upper()>str(y[1]).upper() and 1) or -1 
+
      67   
+
      68 -class Validator(object): 
+
      69      """ 
+  70      Root for all validators, mainly for documentation purposes. 
+  71   
+  72      Validators are classes used to validate input fields (including forms 
+  73      generated from database tables). 
+  74   
+  75      Here is an example of using a validator with a FORM:: 
+  76   
+  77          INPUT(_name='a', requires=IS_INT_IN_RANGE(0, 10)) 
+  78   
+  79      Here is an example of how to require a validator for a table field:: 
+  80   
+  81          db.define_table('person', SQLField('name')) 
+  82          db.person.name.requires=IS_NOT_EMPTY() 
+  83   
+  84      Validators are always assigned using the requires attribute of a field. A 
+  85      field can have a single validator or multiple validators. Multiple 
+  86      validators are made part of a list:: 
+  87   
+  88          db.person.name.requires=[IS_NOT_EMPTY(), IS_NOT_IN_DB(db, 'person.id')] 
+  89   
+  90      Validators are called by the function accepts on a FORM or other HTML 
+  91      helper object that contains a form. They are always called in the order in 
+  92      which they are listed. 
+  93   
+  94      Built-in validators have constructors that take the optional argument error 
+  95      message which allows you to change the default error message. 
+  96      Here is an example of a validator on a database table:: 
+  97   
+  98          db.person.name.requires=IS_NOT_EMPTY(error_message=T('fill this')) 
+  99   
+ 100      where we have used the translation operator T to allow for 
+ 101      internationalization. 
+ 102   
+ 103      Notice that default error messages are not translated. 
+ 104      """ 
+ 105   
+
     106 -    def formatter(self, value): 
+
     107          """ 
+ 108          For some validators returns a formatted version (matching the validator) 
+ 109          of value. Otherwise just returns the value. 
+ 110          """ 
+ 111          return value 
+
     112   
+ 113   
+
     114 -class IS_MATCH(Validator): 
+
     115      """ 
+ 116      example:: 
+ 117   
+ 118          INPUT(_type='text', _name='name', requires=IS_MATCH('.+')) 
+ 119   
+ 120      the argument of IS_MATCH is a regular expression:: 
+ 121   
+ 122          >>> IS_MATCH('.+')('hello') 
+ 123          ('hello', None) 
+ 124   
+ 125          >>> IS_MATCH('.+')('') 
+ 126          ('', 'invalid expression') 
+ 127      """ 
+ 128   
+
     129 -    def __init__(self, expression, error_message='invalid expression', strict=True): 
+
     130          if strict: 
+ 131              if not expression.endswith('$'): 
+ 132                  expression = '(%s)$' % expression 
+ 133          self.regex = re.compile(expression) 
+ 134          self.error_message = error_message 
+
     135   
+
     136 -    def __call__(self, value): 
+
     137          match = self.regex.match(value) 
+ 138          if match: 
+ 139              return (match.group(), None) 
+ 140          return (value, translate(self.error_message)) 
+
     141   
+ 142   
+
     143 -class IS_EQUAL_TO(Validator): 
+
     144      """ 
+ 145      example:: 
+ 146   
+ 147          INPUT(_type='text', _name='password') 
+ 148          INPUT(_type='text', _name='password2', 
+ 149                requires=IS_EQUAL_TO(request.vars.password)) 
+ 150   
+ 151      the argument of IS_EQUAL_TO is a string 
+ 152   
+ 153          >>> IS_EQUAL_TO('aaa')('aaa') 
+ 154          ('aaa', None) 
+ 155   
+ 156          >>> IS_EQUAL_TO('aaa')('aab') 
+ 157          ('aab', 'no match') 
+ 158      """ 
+ 159   
+
     160 -    def __init__(self, expression, error_message='no match'): 
+
     161          self.expression = expression 
+ 162          self.error_message = error_message 
+
     163   
+
     164 -    def __call__(self, value): 
+
     165          if value == self.expression: 
+ 166              return (value, None) 
+ 167          return (value, translate(self.error_message)) 
+
     168   
+ 169   
+
     170 -class IS_EXPR(Validator): 
+
     171      """ 
+ 172      example:: 
+ 173   
+ 174          INPUT(_type='text', _name='name', 
+ 175              requires=IS_EXPR('5 < int(value) < 10')) 
+ 176   
+ 177      the argument of IS_EXPR must be python condition:: 
+ 178   
+ 179          >>> IS_EXPR('int(value) < 2')('1') 
+ 180          ('1', None) 
+ 181   
+ 182          >>> IS_EXPR('int(value) < 2')('2') 
+ 183          ('2', 'invalid expression') 
+ 184      """ 
+ 185   
+
     186 -    def __init__(self, expression, error_message='invalid expression'): 
+
     187          self.expression = expression 
+ 188          self.error_message = error_message 
+
     189   
+
     190 -    def __call__(self, value): 
+
     191          environment = {'value': value} 
+ 192          exec '__ret__=' + self.expression in environment 
+ 193          if environment['__ret__']: 
+ 194              return (value, None) 
+ 195          return (value, translate(self.error_message)) 
+
     196   
+ 197   
+
     198 -class IS_LENGTH(Validator): 
+
     199      """ 
+ 200      Checks if length of field's value fits between given boundaries. Works 
+ 201      for both text and file inputs. 
+ 202   
+ 203      Arguments: 
+ 204   
+ 205      maxsize: maximum allowed length / size 
+ 206      minsize: minimum allowed length / size 
+ 207   
+ 208      Examples:: 
+ 209   
+ 210          #Check if text string is shorter than 33 characters: 
+ 211          INPUT(_type='text', _name='name', requires=IS_LENGTH(32)) 
+ 212   
+ 213          #Check if password string is longer than 5 characters: 
+ 214          INPUT(_type='password', _name='name', requires=IS_LENGTH(minsize=6)) 
+ 215   
+ 216          #Check if uploaded file has size between 1KB and 1MB: 
+ 217          INPUT(_type='file', _name='name', requires=IS_LENGTH(1048576, 1024)) 
+ 218   
+ 219          >>> IS_LENGTH()('') 
+ 220          ('', None) 
+ 221          >>> IS_LENGTH()('1234567890') 
+ 222          ('1234567890', None) 
+ 223          >>> IS_LENGTH(maxsize=5, minsize=0)('1234567890')  # too long 
+ 224          ('1234567890', 'enter from 0 to 5 characters') 
+ 225          >>> IS_LENGTH(maxsize=50, minsize=20)('1234567890')  # too short 
+ 226          ('1234567890', 'enter from 20 to 50 characters') 
+ 227      """ 
+ 228   
+
     229 -    def __init__(self, maxsize=255, minsize=0, 
+ 230                   error_message='enter from %(min)g to %(max)g characters'): 
+
     231          self.maxsize = maxsize 
+ 232          self.minsize = minsize 
+ 233          self.error_message = error_message 
+
     234   
+
     235 -    def __call__(self, value): 
+
     236          if isinstance(value, cgi.FieldStorage): 
+ 237              if value.file: 
+ 238                  value.file.seek(0, os.SEEK_END) 
+ 239                  length = value.file.tell() 
+ 240                  value.file.seek(0, os.SEEK_SET) 
+ 241              else: 
+ 242                  val = value.value 
+ 243                  if val: 
+ 244                      length = len(val) 
+ 245                  else: 
+ 246                      length = 0 
+ 247              if self.minsize <= length <= self.maxsize: 
+ 248                  return (value, None) 
+ 249          elif isinstance(value, (str, unicode, list)): 
+ 250              if self.minsize <= len(value) <= self.maxsize: 
+ 251                  return (value, None) 
+ 252          elif self.minsize <= len(str(value)) <= self.maxsize: 
+ 253              try: 
+ 254                  value.decode('utf8') 
+ 255                  return (value, None) 
+ 256              except: 
+ 257                  pass 
+ 258          return (value, translate(self.error_message) \ 
+ 259                      % dict(min=self.minsize, max=self.maxsize)) 
+
     260   
+ 261   
+
     262 -class IS_IN_SET(Validator): 
+
     263      """ 
+ 264      example:: 
+ 265   
+ 266          INPUT(_type='text', _name='name', 
+ 267                requires=IS_IN_SET(['max', 'john'],zero='')) 
+ 268   
+ 269      the argument of IS_IN_SET must be a list or set 
+ 270   
+ 271          >>> IS_IN_SET(['max', 'john'])('max') 
+ 272          ('max', None) 
+ 273          >>> IS_IN_SET(['max', 'john'])('massimo') 
+ 274          ('massimo', 'value not allowed') 
+ 275          >>> IS_IN_SET(['max', 'john'], multiple=True)(('max', 'john')) 
+ 276          (('max', 'john'), None) 
+ 277          >>> IS_IN_SET(['max', 'john'], multiple=True)(('bill', 'john')) 
+ 278          (('bill', 'john'), 'value not allowed') 
+ 279          >>> IS_IN_SET(('id1','id2'), ['first label','second label'])('id1') # Traditional way 
+ 280          ('id1', None) 
+ 281          >>> IS_IN_SET({'id1':'first label', 'id2':'second label'})('id1') 
+ 282          ('id1', None) 
+ 283          >>> import itertools 
+ 284          >>> IS_IN_SET(itertools.chain(['1','3','5'],['2','4','6']))('1') 
+ 285          ('1', None) 
+ 286          >>> IS_IN_SET([('id1','first label'), ('id2','second label')])('id1') # Redundant way 
+ 287          ('id1', None) 
+ 288      """ 
+ 289   
+
     290 -    def __init__( 
+ 291          self, 
+ 292          theset, 
+ 293          labels=None, 
+ 294          error_message='value not allowed', 
+ 295          multiple=False, 
+ 296          zero='', 
+ 297          sort=False, 
+ 298          ): 
+
     299          self.multiple = multiple 
+ 300          if isinstance(theset, dict): 
+ 301              self.theset = [str(item) for item in theset] 
+ 302              self.labels = theset.values() 
+ 303          elif theset and isinstance(theset, (tuple,list)) \ 
+ 304              and isinstance(theset[0], (tuple,list)) and len(theset[0])==2: 
+ 305              self.theset = [str(item) for item,label in theset] 
+ 306              self.labels = [str(label) for item,label in theset] 
+ 307          else: 
+ 308              self.theset = [str(item) for item in theset] 
+ 309              self.labels = labels 
+ 310          self.error_message = error_message 
+ 311          self.zero = zero 
+ 312          self.sort = sort 
+
     313   
+
     314 -    def options(self,zero=True): 
+
     315          if not self.labels: 
+ 316              items = [(k, k) for (i, k) in enumerate(self.theset)] 
+ 317          else: 
+ 318              items = [(k, self.labels[i]) for (i, k) in enumerate(self.theset)] 
+ 319          if self.sort: 
+ 320              items.sort(options_sorter) 
+ 321          if zero and self.zero != None and not self.multiple: 
+ 322              items.insert(0,('',self.zero)) 
+ 323          return items 
+
     324   
+
     325 -    def __call__(self, value): 
+
     326          if self.multiple: 
+ 327              ### if below was values = re.compile("[\w\-:]+").findall(str(value)) 
+ 328              if isinstance(value, (str,unicode)): 
+ 329                  values = [value] 
+ 330              elif isinstance(value, (tuple, list)): 
+ 331                  values = value 
+ 332              elif not value: 
+ 333                  values = [] 
+ 334          else: 
+ 335              values = [value] 
+ 336          failures = [x for x in values if not x in self.theset] 
+ 337          if failures and self.theset: 
+ 338              if self.multiple and (value == None or value == ''): 
+ 339                  return ([], None) 
+ 340              return (value, translate(self.error_message)) 
+ 341          if self.multiple: 
+ 342              if isinstance(self.multiple,(tuple,list)) and \ 
+ 343                      not self.multiple[0]<=len(values)<self.multiple[1]: 
+ 344                  return (values, translate(self.error_message)) 
+ 345              return (values, None) 
+ 346          return (value, None) 
+
     347   
+ 348   
+ 349  regex1 = re.compile('[\w_]+\.[\w_]+') 
+ 350  regex2 = re.compile('%\((?P<name>[^\)]+)\)s') 
+ 351   
+ 352   
+
     353 -class IS_IN_DB(Validator): 
+
     354      """ 
+ 355      example:: 
+ 356   
+ 357          INPUT(_type='text', _name='name', 
+ 358                requires=IS_IN_DB(db, db.mytable.myfield, zero='')) 
+ 359   
+ 360      used for reference fields, rendered as a dropbox 
+ 361      """ 
+ 362   
+
     363 -    def __init__( 
+ 364          self, 
+ 365          dbset, 
+ 366          field, 
+ 367          label=None, 
+ 368          error_message='value not in database', 
+ 369          orderby=None, 
+ 370          groupby=None, 
+ 371          cache=None, 
+ 372          multiple=False, 
+ 373          zero='', 
+ 374          sort=False, 
+ 375          _and=None, 
+ 376          ): 
+
     377          from dal import Table 
+ 378          if isinstance(field,Table): field = field._id 
+ 379   
+ 380          if hasattr(dbset, 'define_table'): 
+ 381              self.dbset = dbset() 
+ 382          else: 
+ 383              self.dbset = dbset 
+ 384          self.field = field 
+ 385          (ktable, kfield) = str(self.field).split('.') 
+ 386          if not label: 
+ 387              label = '%%(%s)s' % kfield 
+ 388          if isinstance(label,str): 
+ 389              if regex1.match(str(label)): 
+ 390                  label = '%%(%s)s' % str(label).split('.')[-1] 
+ 391              ks = regex2.findall(label) 
+ 392              if not kfield in ks: 
+ 393                  ks += [kfield] 
+ 394              fields = ks 
+ 395          else: 
+ 396              ks = [kfield] 
+ 397              fields = 'all' 
+ 398          self.fields = fields 
+ 399          self.label = label 
+ 400          self.ktable = ktable 
+ 401          self.kfield = kfield 
+ 402          self.ks = ks 
+ 403          self.error_message = error_message 
+ 404          self.theset = None 
+ 405          self.orderby = orderby 
+ 406          self.groupby = groupby 
+ 407          self.cache = cache 
+ 408          self.multiple = multiple 
+ 409          self.zero = zero 
+ 410          self.sort = sort 
+ 411          self._and = _and 
+
     412   
+
     413 -    def set_self_id(self, id): 
+
     414          if self._and: 
+ 415              self._and.record_id = id 
+
     416   
+
     417 -    def build_set(self): 
+
     418          if self.fields == 'all': 
+ 419              fields = [f for f in self.dbset.db[self.ktable]] 
+ 420          else: 
+ 421              fields = [self.dbset.db[self.ktable][k] for k in self.fields] 
+ 422          if self.dbset.db._dbname != 'gae': 
+ 423              orderby = self.orderby or reduce(lambda a,b:a|b,fields) 
+ 424              groupby = self.groupby 
+ 425              dd = dict(orderby=orderby, groupby=groupby, cache=self.cache) 
+ 426              records = self.dbset.select(*fields, **dd) 
+ 427          else: 
+ 428              orderby = self.orderby or reduce(lambda a,b:a|b,(f for f in fields if not f.name=='id')) 
+ 429              dd = dict(orderby=orderby, cache=self.cache) 
+ 430              records = self.dbset.select(self.dbset.db[self.ktable].ALL, **dd) 
+ 431          self.theset = [str(r[self.kfield]) for r in records] 
+ 432          if isinstance(self.label,str): 
+ 433              self.labels = [self.label % dict(r) for r in records] 
+ 434          else: 
+ 435              self.labels = [self.label(r) for r in records] 
+
     436   
+
     437 -    def options(self, zero=True): 
+
     438          self.build_set() 
+ 439          items = [(k, self.labels[i]) for (i, k) in enumerate(self.theset)] 
+ 440          if self.sort: 
+ 441              items.sort(options_sorter) 
+ 442          if zero and self.zero != None and not self.multiple: 
+ 443              items.insert(0,('',self.zero)) 
+ 444          return items 
+
     445   
+
     446 -    def __call__(self, value): 
+
     447          if self.multiple: 
+ 448              if isinstance(value,list): 
+ 449                  values=value 
+ 450              elif value: 
+ 451                  values = [value] 
+ 452              else: 
+ 453                  values = [] 
+ 454              if isinstance(self.multiple,(tuple,list)) and \ 
+ 455                      not self.multiple[0]<=len(values)<self.multiple[1]: 
+ 456                  return (values, translate(self.error_message)) 
+ 457              if not [x for x in values if not x in self.theset]: 
+ 458                  return (values, None) 
+ 459          elif self.theset: 
+ 460              if value in self.theset: 
+ 461                  if self._and: 
+ 462                      return self._and(value) 
+ 463                  else: 
+ 464                      return (value, None) 
+ 465          else: 
+ 466              (ktable, kfield) = str(self.field).split('.') 
+ 467              field = self.dbset.db[ktable][kfield] 
+ 468              if self.dbset(field == value).count(): 
+ 469                  if self._and: 
+ 470                      return self._and(value) 
+ 471                  else: 
+ 472                      return (value, None) 
+ 473          return (value, translate(self.error_message)) 
+
     474   
+ 475   
+
     476 -class IS_NOT_IN_DB(Validator): 
+
     477      """ 
+ 478      example:: 
+ 479   
+ 480          INPUT(_type='text', _name='name', requires=IS_NOT_IN_DB(db, db.table)) 
+ 481   
+ 482      makes the field unique 
+ 483      """ 
+ 484   
+
     485 -    def __init__( 
+ 486          self, 
+ 487          dbset, 
+ 488          field, 
+ 489          error_message='value already in database or empty', 
+ 490          allowed_override=[], 
+ 491          ): 
+
     492   
+ 493          from dal import Table 
+ 494          if isinstance(field,Table): field = field._id 
+ 495   
+ 496          if hasattr(dbset, 'define_table'): 
+ 497              self.dbset = dbset() 
+ 498          else: 
+ 499              self.dbset = dbset 
+ 500          self.field = field 
+ 501          self.error_message = error_message 
+ 502          self.record_id = 0 
+ 503          self.allowed_override = allowed_override 
+
     504   
+
     505 -    def set_self_id(self, id): 
+
     506          self.record_id = id 
+
     507   
+
     508 -    def __call__(self, value): 
+
     509          value=str(value) 
+ 510          if not value.strip(): 
+ 511              return (value, translate(self.error_message)) 
+ 512          if value in self.allowed_override: 
+ 513              return (value, None) 
+ 514          (tablename, fieldname) = str(self.field).split('.') 
+ 515          field = self.dbset.db[tablename][fieldname] 
+ 516          rows = self.dbset(field == value).select(limitby=(0, 1)) 
+ 517          if len(rows) > 0: 
+ 518              if isinstance(self.record_id, dict): 
+ 519                  for f in self.record_id: 
+ 520                      if str(getattr(rows[0], f)) != str(self.record_id[f]): 
+ 521                          return (value, translate(self.error_message)) 
+ 522              elif str(rows[0].id) != str(self.record_id): 
+ 523                  return (value, translate(self.error_message)) 
+ 524          return (value, None) 
+
     525   
+ 526   
+
     527 -class IS_INT_IN_RANGE(Validator): 
+
     528      """ 
+ 529      Determine that the argument is (or can be represented as) an int, 
+ 530      and that it falls within the specified range. The range is interpreted 
+ 531      in the Pythonic way, so the test is: min <= value < max. 
+ 532   
+ 533      The minimum and maximum limits can be None, meaning no lower or upper limit, 
+ 534      respectively. 
+ 535   
+ 536      example:: 
+ 537   
+ 538          INPUT(_type='text', _name='name', requires=IS_INT_IN_RANGE(0, 10)) 
+ 539   
+ 540          >>> IS_INT_IN_RANGE(1,5)('4') 
+ 541          (4, None) 
+ 542          >>> IS_INT_IN_RANGE(1,5)(4) 
+ 543          (4, None) 
+ 544          >>> IS_INT_IN_RANGE(1,5)(1) 
+ 545          (1, None) 
+ 546          >>> IS_INT_IN_RANGE(1,5)(5) 
+ 547          (5, 'enter an integer between 1 and 4') 
+ 548          >>> IS_INT_IN_RANGE(1,5)(5) 
+ 549          (5, 'enter an integer between 1 and 4') 
+ 550          >>> IS_INT_IN_RANGE(1,5)(3.5) 
+ 551          (3, 'enter an integer between 1 and 4') 
+ 552          >>> IS_INT_IN_RANGE(None,5)('4') 
+ 553          (4, None) 
+ 554          >>> IS_INT_IN_RANGE(None,5)('6') 
+ 555          (6, 'enter an integer less than or equal to 4') 
+ 556          >>> IS_INT_IN_RANGE(1,None)('4') 
+ 557          (4, None) 
+ 558          >>> IS_INT_IN_RANGE(1,None)('0') 
+ 559          (0, 'enter an integer greater than or equal to 1') 
+ 560          >>> IS_INT_IN_RANGE()(6) 
+ 561          (6, None) 
+ 562          >>> IS_INT_IN_RANGE()('abc') 
+ 563          ('abc', 'enter an integer') 
+ 564      """ 
+ 565   
+
     566 -    def __init__( 
+ 567          self, 
+ 568          minimum=None, 
+ 569          maximum=None, 
+ 570          error_message=None, 
+ 571          ): 
+
     572          self.minimum = self.maximum = None 
+ 573          if minimum is None: 
+ 574              if maximum is None: 
+ 575                  self.error_message = error_message or 'enter an integer' 
+ 576              else: 
+ 577                  self.maximum = int(maximum) 
+ 578                  if error_message is None: 
+ 579                      error_message = 'enter an integer less than or equal to %(max)g' 
+ 580                  self.error_message = translate(error_message) % dict(max=self.maximum-1) 
+ 581          elif maximum is None: 
+ 582              self.minimum = int(minimum) 
+ 583              if error_message is None: 
+ 584                  error_message = 'enter an integer greater than or equal to %(min)g' 
+ 585              self.error_message = translate(error_message) % dict(min=self.minimum) 
+ 586          else: 
+ 587              self.minimum = int(minimum) 
+ 588              self.maximum = int(maximum) 
+ 589              if error_message is None: 
+ 590                  error_message = 'enter an integer between %(min)g and %(max)g' 
+ 591              self.error_message = translate(error_message) \ 
+ 592                  % dict(min=self.minimum, max=self.maximum-1) 
+
     593   
+
     594 -    def __call__(self, value): 
+
     595          try: 
+ 596              fvalue = float(value) 
+ 597              value = int(value) 
+ 598              if value != fvalue: 
+ 599                  return (value, self.error_message) 
+ 600              if self.minimum is None: 
+ 601                  if self.maximum is None or value < self.maximum: 
+ 602                      return (value, None) 
+ 603              elif self.maximum is None: 
+ 604                  if value >= self.minimum: 
+ 605                      return (value, None) 
+ 606              elif self.minimum <= value < self.maximum: 
+ 607                      return (value, None) 
+ 608          except ValueError: 
+ 609              pass 
+ 610          return (value, self.error_message) 
+
     611   
+ 612   
+
     613 -class IS_FLOAT_IN_RANGE(Validator): 
+
     614      """ 
+ 615      Determine that the argument is (or can be represented as) a float, 
+ 616      and that it falls within the specified inclusive range. 
+ 617      The comparison is made with native arithmetic. 
+ 618   
+ 619      The minimum and maximum limits can be None, meaning no lower or upper limit, 
+ 620      respectively. 
+ 621   
+ 622      example:: 
+ 623   
+ 624          INPUT(_type='text', _name='name', requires=IS_FLOAT_IN_RANGE(0, 10)) 
+ 625   
+ 626          >>> IS_FLOAT_IN_RANGE(1,5)('4') 
+ 627          (4.0, None) 
+ 628          >>> IS_FLOAT_IN_RANGE(1,5)(4) 
+ 629          (4.0, None) 
+ 630          >>> IS_FLOAT_IN_RANGE(1,5)(1) 
+ 631          (1.0, None) 
+ 632          >>> IS_FLOAT_IN_RANGE(1,5)(5.25) 
+ 633          (5.25, 'enter a number between 1 and 5') 
+ 634          >>> IS_FLOAT_IN_RANGE(1,5)(6.0) 
+ 635          (6.0, 'enter a number between 1 and 5') 
+ 636          >>> IS_FLOAT_IN_RANGE(1,5)(3.5) 
+ 637          (3.5, None) 
+ 638          >>> IS_FLOAT_IN_RANGE(1,None)(3.5) 
+ 639          (3.5, None) 
+ 640          >>> IS_FLOAT_IN_RANGE(None,5)(3.5) 
+ 641          (3.5, None) 
+ 642          >>> IS_FLOAT_IN_RANGE(1,None)(0.5) 
+ 643          (0.5, 'enter a number greater than or equal to 1') 
+ 644          >>> IS_FLOAT_IN_RANGE(None,5)(6.5) 
+ 645          (6.5, 'enter a number less than or equal to 5') 
+ 646          >>> IS_FLOAT_IN_RANGE()(6.5) 
+ 647          (6.5, None) 
+ 648          >>> IS_FLOAT_IN_RANGE()('abc') 
+ 649          ('abc', 'enter a number') 
+ 650      """ 
+ 651   
+
     652 -    def __init__( 
+ 653          self, 
+ 654          minimum=None, 
+ 655          maximum=None, 
+ 656          error_message=None, 
+ 657          dot='.' 
+ 658          ): 
+
     659          self.minimum = self.maximum = None 
+ 660          self.dot = dot 
+ 661          if minimum is None: 
+ 662              if maximum is None: 
+ 663                  if error_message is None: 
+ 664                      error_message = 'enter a number' 
+ 665              else: 
+ 666                  self.maximum = float(maximum) 
+ 667                  if error_message is None: 
+ 668                      error_message = 'enter a number less than or equal to %(max)g' 
+ 669          elif maximum is None: 
+ 670              self.minimum = float(minimum) 
+ 671              if error_message is None: 
+ 672                  error_message = 'enter a number greater than or equal to %(min)g' 
+ 673          else: 
+ 674              self.minimum = float(minimum) 
+ 675              self.maximum = float(maximum) 
+ 676              if error_message is None: 
+ 677                  error_message = 'enter a number between %(min)g and %(max)g' 
+ 678          self.error_message = translate(error_message) \ 
+ 679              % dict(min=self.minimum, max=self.maximum) 
+
     680   
+
     681 -    def __call__(self, value): 
+
     682          try: 
+ 683              if self.dot=='.': 
+ 684                  fvalue = float(value) 
+ 685              else: 
+ 686                  fvalue = float(str(value).replace(self.dot,'.')) 
+ 687              if self.minimum is None: 
+ 688                  if self.maximum is None or fvalue <= self.maximum: 
+ 689                      return (fvalue, None) 
+ 690              elif self.maximum is None: 
+ 691                  if fvalue >= self.minimum: 
+ 692                      return (fvalue, None) 
+ 693              elif self.minimum <= fvalue <= self.maximum: 
+ 694                      return (fvalue, None) 
+ 695          except (ValueError, TypeError): 
+ 696              pass 
+ 697          return (value, self.error_message) 
+
     698   
+
     699 -    def formatter(self,value): 
+
     700          if self.dot=='.': 
+ 701              return str(value) 
+ 702          else: 
+ 703              return str(value).replace('.',self.dot) 
+
     704   
+ 705   
+
     706 -class IS_DECIMAL_IN_RANGE(Validator): 
+
     707      """ 
+ 708      Determine that the argument is (or can be represented as) a Python Decimal, 
+ 709      and that it falls within the specified inclusive range. 
+ 710      The comparison is made with Python Decimal arithmetic. 
+ 711   
+ 712      The minimum and maximum limits can be None, meaning no lower or upper limit, 
+ 713      respectively. 
+ 714   
+ 715      example:: 
+ 716   
+ 717          INPUT(_type='text', _name='name', requires=IS_DECIMAL_IN_RANGE(0, 10)) 
+ 718   
+ 719          >>> IS_DECIMAL_IN_RANGE(1,5)('4') 
+ 720          (Decimal('4'), None) 
+ 721          >>> IS_DECIMAL_IN_RANGE(1,5)(4) 
+ 722          (Decimal('4'), None) 
+ 723          >>> IS_DECIMAL_IN_RANGE(1,5)(1) 
+ 724          (Decimal('1'), None) 
+ 725          >>> IS_DECIMAL_IN_RANGE(1,5)(5.25) 
+ 726          (5.25, 'enter a number between 1 and 5') 
+ 727          >>> IS_DECIMAL_IN_RANGE(5.25,6)(5.25) 
+ 728          (Decimal('5.25'), None) 
+ 729          >>> IS_DECIMAL_IN_RANGE(5.25,6)('5.25') 
+ 730          (Decimal('5.25'), None) 
+ 731          >>> IS_DECIMAL_IN_RANGE(1,5)(6.0) 
+ 732          (6.0, 'enter a number between 1 and 5') 
+ 733          >>> IS_DECIMAL_IN_RANGE(1,5)(3.5) 
+ 734          (Decimal('3.5'), None) 
+ 735          >>> IS_DECIMAL_IN_RANGE(1.5,5.5)(3.5) 
+ 736          (Decimal('3.5'), None) 
+ 737          >>> IS_DECIMAL_IN_RANGE(1.5,5.5)(6.5) 
+ 738          (6.5, 'enter a number between 1.5 and 5.5') 
+ 739          >>> IS_DECIMAL_IN_RANGE(1.5,None)(6.5) 
+ 740          (Decimal('6.5'), None) 
+ 741          >>> IS_DECIMAL_IN_RANGE(1.5,None)(0.5) 
+ 742          (0.5, 'enter a number greater than or equal to 1.5') 
+ 743          >>> IS_DECIMAL_IN_RANGE(None,5.5)(4.5) 
+ 744          (Decimal('4.5'), None) 
+ 745          >>> IS_DECIMAL_IN_RANGE(None,5.5)(6.5) 
+ 746          (6.5, 'enter a number less than or equal to 5.5') 
+ 747          >>> IS_DECIMAL_IN_RANGE()(6.5) 
+ 748          (Decimal('6.5'), None) 
+ 749          >>> IS_DECIMAL_IN_RANGE(0,99)(123.123) 
+ 750          (123.123, 'enter a number between 0 and 99') 
+ 751          >>> IS_DECIMAL_IN_RANGE(0,99)('123.123') 
+ 752          ('123.123', 'enter a number between 0 and 99') 
+ 753          >>> IS_DECIMAL_IN_RANGE(0,99)('12.34') 
+ 754          (Decimal('12.34'), None) 
+ 755          >>> IS_DECIMAL_IN_RANGE()('abc') 
+ 756          ('abc', 'enter a decimal number') 
+ 757      """ 
+ 758   
+
     759 -    def __init__( 
+ 760          self, 
+ 761          minimum=None, 
+ 762          maximum=None, 
+ 763          error_message=None, 
+ 764          dot='.' 
+ 765          ): 
+
     766          self.minimum = self.maximum = None 
+ 767          self.dot = dot 
+ 768          if minimum is None: 
+ 769              if maximum is None: 
+ 770                  if error_message is None: 
+ 771                      error_message = 'enter a decimal number' 
+ 772              else: 
+ 773                  self.maximum = decimal.Decimal(str(maximum)) 
+ 774                  if error_message is None: 
+ 775                      error_message = 'enter a number less than or equal to %(max)g' 
+ 776          elif maximum is None: 
+ 777              self.minimum = decimal.Decimal(str(minimum)) 
+ 778              if error_message is None: 
+ 779                  error_message = 'enter a number greater than or equal to %(min)g' 
+ 780          else: 
+ 781              self.minimum = decimal.Decimal(str(minimum)) 
+ 782              self.maximum = decimal.Decimal(str(maximum)) 
+ 783              if error_message is None: 
+ 784                  error_message = 'enter a number between %(min)g and %(max)g' 
+ 785          self.error_message = translate(error_message) \ 
+ 786              % dict(min=self.minimum, max=self.maximum) 
+
     787   
+
     788 -    def __call__(self, value): 
+
     789          try: 
+ 790              if isinstance(value,decimal.Decimal): 
+ 791                  v = value 
+ 792              else: 
+ 793                  v = decimal.Decimal(str(value).replace(self.dot,'.')) 
+ 794              if self.minimum is None: 
+ 795                  if self.maximum is None or v <= self.maximum: 
+ 796                      return (v, None) 
+ 797              elif self.maximum is None: 
+ 798                  if v >= self.minimum: 
+ 799                      return (v, None) 
+ 800              elif self.minimum <= v <= self.maximum: 
+ 801                      return (v, None) 
+ 802          except (ValueError, TypeError, decimal.InvalidOperation): 
+ 803              pass 
+ 804          return (value, self.error_message) 
+
     805   
+
     806 -    def formatter(self, value): 
+
     807          return str(value).replace('.',self.dot) 
+
     808   
+
     809 -def is_empty(value, empty_regex=None): 
+
     810      "test empty field" 
+ 811      if isinstance(value, (str, unicode)): 
+ 812          value = value.strip() 
+ 813          if empty_regex is not None and empty_regex.match(value): 
+ 814              value = '' 
+ 815      if value == None or value == '' or value == []: 
+ 816          return (value, True) 
+ 817      return (value, False) 
+
     818   
+
     819 -class IS_NOT_EMPTY(Validator): 
+
     820      """ 
+ 821      example:: 
+ 822   
+ 823          INPUT(_type='text', _name='name', requires=IS_NOT_EMPTY()) 
+ 824   
+ 825          >>> IS_NOT_EMPTY()(1) 
+ 826          (1, None) 
+ 827          >>> IS_NOT_EMPTY()(0) 
+ 828          (0, None) 
+ 829          >>> IS_NOT_EMPTY()('x') 
+ 830          ('x', None) 
+ 831          >>> IS_NOT_EMPTY()(' x ') 
+ 832          ('x', None) 
+ 833          >>> IS_NOT_EMPTY()(None) 
+ 834          (None, 'enter a value') 
+ 835          >>> IS_NOT_EMPTY()('') 
+ 836          ('', 'enter a value') 
+ 837          >>> IS_NOT_EMPTY()('  ') 
+ 838          ('', 'enter a value') 
+ 839          >>> IS_NOT_EMPTY()(' \\n\\t') 
+ 840          ('', 'enter a value') 
+ 841          >>> IS_NOT_EMPTY()([]) 
+ 842          ([], 'enter a value') 
+ 843          >>> IS_NOT_EMPTY(empty_regex='def')('def') 
+ 844          ('', 'enter a value') 
+ 845          >>> IS_NOT_EMPTY(empty_regex='de[fg]')('deg') 
+ 846          ('', 'enter a value') 
+ 847          >>> IS_NOT_EMPTY(empty_regex='def')('abc') 
+ 848          ('abc', None) 
+ 849      """ 
+ 850   
+
     851 -    def __init__(self, error_message='enter a value', empty_regex=None): 
+
     852          self.error_message = error_message 
+ 853          if empty_regex is not None: 
+ 854              self.empty_regex = re.compile(empty_regex) 
+ 855          else: 
+ 856              self.empty_regex = None 
+
     857   
+
     858 -    def __call__(self, value): 
+
     859          value, empty = is_empty(value, empty_regex=self.empty_regex) 
+ 860          if empty: 
+ 861              return (value, translate(self.error_message)) 
+ 862          return (value, None) 
+
     863   
+ 864   
+
     865 -class IS_ALPHANUMERIC(IS_MATCH): 
+
     866      """ 
+ 867      example:: 
+ 868   
+ 869          INPUT(_type='text', _name='name', requires=IS_ALPHANUMERIC()) 
+ 870   
+ 871          >>> IS_ALPHANUMERIC()('1') 
+ 872          ('1', None) 
+ 873          >>> IS_ALPHANUMERIC()('') 
+ 874          ('', None) 
+ 875          >>> IS_ALPHANUMERIC()('A_a') 
+ 876          ('A_a', None) 
+ 877          >>> IS_ALPHANUMERIC()('!') 
+ 878          ('!', 'enter only letters, numbers, and underscore') 
+ 879      """ 
+ 880   
+
     881 -    def __init__(self, error_message='enter only letters, numbers, and underscore'): 
+
     882          IS_MATCH.__init__(self, '^[\w]*$', error_message) 
+
     883   
+ 884   
+
     885 -class IS_EMAIL(Validator): 
+
     886      """ 
+ 887      Checks if field's value is a valid email address. Can be set to disallow 
+ 888      or force addresses from certain domain(s). 
+ 889   
+ 890      Email regex adapted from 
+ 891      http://haacked.com/archive/2007/08/21/i-knew-how-to-validate-an-email-address-until-i.aspx, 
+ 892      generally following the RFCs, except that we disallow quoted strings 
+ 893      and permit underscores and leading numerics in subdomain labels 
+ 894   
+ 895      Arguments: 
+ 896   
+ 897      - banned: regex text for disallowed address domains 
+ 898      - forced: regex text for required address domains 
+ 899   
+ 900      Both arguments can also be custom objects with a match(value) method. 
+ 901   
+ 902      Examples:: 
+ 903   
+ 904          #Check for valid email address: 
+ 905          INPUT(_type='text', _name='name', 
+ 906              requires=IS_EMAIL()) 
+ 907   
+ 908          #Check for valid email address that can't be from a .com domain: 
+ 909          INPUT(_type='text', _name='name', 
+ 910              requires=IS_EMAIL(banned='^.*\.com(|\..*)$')) 
+ 911   
+ 912          #Check for valid email address that must be from a .edu domain: 
+ 913          INPUT(_type='text', _name='name', 
+ 914              requires=IS_EMAIL(forced='^.*\.edu(|\..*)$')) 
+ 915   
+ 916          >>> IS_EMAIL()('a@b.com') 
+ 917          ('a@b.com', None) 
+ 918          >>> IS_EMAIL()('abc@def.com') 
+ 919          ('abc@def.com', None) 
+ 920          >>> IS_EMAIL()('abc@3def.com') 
+ 921          ('abc@3def.com', None) 
+ 922          >>> IS_EMAIL()('abc@def.us') 
+ 923          ('abc@def.us', None) 
+ 924          >>> IS_EMAIL()('abc@d_-f.us') 
+ 925          ('abc@d_-f.us', None) 
+ 926          >>> IS_EMAIL()('@def.com')           # missing name 
+ 927          ('@def.com', 'enter a valid email address') 
+ 928          >>> IS_EMAIL()('"abc@def".com')      # quoted name 
+ 929          ('"abc@def".com', 'enter a valid email address') 
+ 930          >>> IS_EMAIL()('abc+def.com')        # no @ 
+ 931          ('abc+def.com', 'enter a valid email address') 
+ 932          >>> IS_EMAIL()('abc@def.x')          # one-char TLD 
+ 933          ('abc@def.x', 'enter a valid email address') 
+ 934          >>> IS_EMAIL()('abc@def.12')         # numeric TLD 
+ 935          ('abc@def.12', 'enter a valid email address') 
+ 936          >>> IS_EMAIL()('abc@def..com')       # double-dot in domain 
+ 937          ('abc@def..com', 'enter a valid email address') 
+ 938          >>> IS_EMAIL()('abc@.def.com')       # dot starts domain 
+ 939          ('abc@.def.com', 'enter a valid email address') 
+ 940          >>> IS_EMAIL()('abc@def.c_m')        # underscore in TLD 
+ 941          ('abc@def.c_m', 'enter a valid email address') 
+ 942          >>> IS_EMAIL()('NotAnEmail')         # missing @ 
+ 943          ('NotAnEmail', 'enter a valid email address') 
+ 944          >>> IS_EMAIL()('abc@NotAnEmail')     # missing TLD 
+ 945          ('abc@NotAnEmail', 'enter a valid email address') 
+ 946          >>> IS_EMAIL()('customer/department@example.com') 
+ 947          ('customer/department@example.com', None) 
+ 948          >>> IS_EMAIL()('$A12345@example.com') 
+ 949          ('$A12345@example.com', None) 
+ 950          >>> IS_EMAIL()('!def!xyz%abc@example.com') 
+ 951          ('!def!xyz%abc@example.com', None) 
+ 952          >>> IS_EMAIL()('_Yosemite.Sam@example.com') 
+ 953          ('_Yosemite.Sam@example.com', None) 
+ 954          >>> IS_EMAIL()('~@example.com') 
+ 955          ('~@example.com', None) 
+ 956          >>> IS_EMAIL()('.wooly@example.com')       # dot starts name 
+ 957          ('.wooly@example.com', 'enter a valid email address') 
+ 958          >>> IS_EMAIL()('wo..oly@example.com')      # adjacent dots in name 
+ 959          ('wo..oly@example.com', 'enter a valid email address') 
+ 960          >>> IS_EMAIL()('pootietang.@example.com')  # dot ends name 
+ 961          ('pootietang.@example.com', 'enter a valid email address') 
+ 962          >>> IS_EMAIL()('.@example.com')            # name is bare dot 
+ 963          ('.@example.com', 'enter a valid email address') 
+ 964          >>> IS_EMAIL()('Ima.Fool@example.com') 
+ 965          ('Ima.Fool@example.com', None) 
+ 966          >>> IS_EMAIL()('Ima Fool@example.com')     # space in name 
+ 967          ('Ima Fool@example.com', 'enter a valid email address') 
+ 968          >>> IS_EMAIL()('localguy@localhost')       # localhost as domain 
+ 969          ('localguy@localhost', None) 
+ 970   
+ 971      """ 
+ 972   
+ 973      regex = re.compile(''' 
+ 974          ^(?!\.)                            # name may not begin with a dot 
+ 975          ( 
+ 976            [-a-z0-9!\#$%&'*+/=?^_`{|}~]     # all legal characters except dot 
+ 977            | 
+ 978            (?<!\.)\.                        # single dots only 
+ 979          )+ 
+ 980          (?<!\.)                            # name may not end with a dot 
+ 981          @ 
+ 982          ( 
+ 983            localhost 
+ 984            | 
+ 985            ( 
+ 986              [a-z0-9]                         # [sub]domain begins with alphanumeric 
+ 987              ( 
+ 988                [-\w]*                         # alphanumeric, underscore, dot, hyphen 
+ 989                [a-z0-9]                       # ending alphanumeric 
+ 990              )? 
+ 991            \.                               # ending dot 
+ 992            )+ 
+ 993            [a-z]{2,}                        # TLD alpha-only 
+ 994         )$ 
+ 995      ''', re.VERBOSE|re.IGNORECASE) 
+ 996   
+ 997      regex_proposed_but_failed = re.compile('^([\w\!\#$\%\&\'\*\+\-\/\=\?\^\`{\|\}\~]+\.)*[\w\!\#$\%\&\'\*\+\-\/\=\?\^\`{\|\}\~]+@((((([a-z0-9]{1}[a-z0-9\-]{0,62}[a-z0-9]{1})|[a-z])\.)+[a-z]{2,6})|(\d{1,3}\.){3}\d{1,3}(\:\d{1,5})?)$',re.VERBOSE|re.IGNORECASE) 
+ 998   
+
     999 -    def __init__(self, 
+1000                   banned=None, 
+1001                   forced=None, 
+1002                   error_message='enter a valid email address'): 
+
    1003          if isinstance(banned, str): 
+1004              banned = re.compile(banned) 
+1005          if isinstance(forced, str): 
+1006              forced = re.compile(forced) 
+1007          self.banned = banned 
+1008          self.forced = forced 
+1009          self.error_message = error_message 
+
    1010   
+
    1011 -    def __call__(self, value): 
+
    1012          match = self.regex.match(value) 
+1013          if match: 
+1014              domain = value.split('@')[1] 
+1015              if (not self.banned or not self.banned.match(domain)) \ 
+1016                      and (not self.forced or self.forced.match(domain)): 
+1017                  return (value, None) 
+1018          return (value, translate(self.error_message)) 
+
    1019   
+1020   
+1021  # URL scheme source: 
+1022  # <http://en.wikipedia.org/wiki/URI_scheme> obtained on 2008-Nov-10 
+1023   
+1024  official_url_schemes = [ 
+1025      'aaa', 
+1026      'aaas', 
+1027      'acap', 
+1028      'cap', 
+1029      'cid', 
+1030      'crid', 
+1031      'data', 
+1032      'dav', 
+1033      'dict', 
+1034      'dns', 
+1035      'fax', 
+1036      'file', 
+1037      'ftp', 
+1038      'go', 
+1039      'gopher', 
+1040      'h323', 
+1041      'http', 
+1042      'https', 
+1043      'icap', 
+1044      'im', 
+1045      'imap', 
+1046      'info', 
+1047      'ipp', 
+1048      'iris', 
+1049      'iris.beep', 
+1050      'iris.xpc', 
+1051      'iris.xpcs', 
+1052      'iris.lws', 
+1053      'ldap', 
+1054      'mailto', 
+1055      'mid', 
+1056      'modem', 
+1057      'msrp', 
+1058      'msrps', 
+1059      'mtqp', 
+1060      'mupdate', 
+1061      'news', 
+1062      'nfs', 
+1063      'nntp', 
+1064      'opaquelocktoken', 
+1065      'pop', 
+1066      'pres', 
+1067      'prospero', 
+1068      'rtsp', 
+1069      'service', 
+1070      'shttp', 
+1071      'sip', 
+1072      'sips', 
+1073      'snmp', 
+1074      'soap.beep', 
+1075      'soap.beeps', 
+1076      'tag', 
+1077      'tel', 
+1078      'telnet', 
+1079      'tftp', 
+1080      'thismessage', 
+1081      'tip', 
+1082      'tv', 
+1083      'urn', 
+1084      'vemmi', 
+1085      'wais', 
+1086      'xmlrpc.beep', 
+1087      'xmlrpc.beep', 
+1088      'xmpp', 
+1089      'z39.50r', 
+1090      'z39.50s', 
+1091      ] 
+1092  unofficial_url_schemes = [ 
+1093      'about', 
+1094      'adiumxtra', 
+1095      'aim', 
+1096      'afp', 
+1097      'aw', 
+1098      'callto', 
+1099      'chrome', 
+1100      'cvs', 
+1101      'ed2k', 
+1102      'feed', 
+1103      'fish', 
+1104      'gg', 
+1105      'gizmoproject', 
+1106      'iax2', 
+1107      'irc', 
+1108      'ircs', 
+1109      'itms', 
+1110      'jar', 
+1111      'javascript', 
+1112      'keyparc', 
+1113      'lastfm', 
+1114      'ldaps', 
+1115      'magnet', 
+1116      'mms', 
+1117      'msnim', 
+1118      'mvn', 
+1119      'notes', 
+1120      'nsfw', 
+1121      'psyc', 
+1122      'paparazzi:http', 
+1123      'rmi', 
+1124      'rsync', 
+1125      'secondlife', 
+1126      'sgn', 
+1127      'skype', 
+1128      'ssh', 
+1129      'sftp', 
+1130      'smb', 
+1131      'sms', 
+1132      'soldat', 
+1133      'steam', 
+1134      'svn', 
+1135      'teamspeak', 
+1136      'unreal', 
+1137      'ut2004', 
+1138      'ventrilo', 
+1139      'view-source', 
+1140      'webcal', 
+1141      'wyciwyg', 
+1142      'xfire', 
+1143      'xri', 
+1144      'ymsgr', 
+1145      ] 
+1146  all_url_schemes = [None] + official_url_schemes + unofficial_url_schemes 
+1147  http_schemes = [None, 'http', 'https'] 
+1148   
+1149   
+1150  # This regex comes from RFC 2396, Appendix B. It's used to split a URL into 
+1151  # its component parts 
+1152  # Here are the regex groups that it extracts: 
+1153  #    scheme = group(2) 
+1154  #    authority = group(4) 
+1155  #    path = group(5) 
+1156  #    query = group(7) 
+1157  #    fragment = group(9) 
+1158   
+1159  url_split_regex = \ 
+1160      re.compile('^(([^:/?#]+):)?(//([^/?#]*))?([^?#]*)(\?([^#]*))?(#(.*))?') 
+1161   
+1162  # Defined in RFC 3490, Section 3.1, Requirement #1 
+1163  # Use this regex to split the authority component of a unicode URL into 
+1164  # its component labels 
+1165  label_split_regex = re.compile(u'[\u002e\u3002\uff0e\uff61]') 
+1166   
+1167   
+
    1168 -def escape_unicode(string): 
+
    1169      ''' 
+1170      Converts a unicode string into US-ASCII, using a simple conversion scheme. 
+1171      Each unicode character that does not have a US-ASCII equivalent is 
+1172      converted into a URL escaped form based on its hexadecimal value. 
+1173      For example, the unicode character '\u4e86' will become the string '%4e%86' 
+1174   
+1175      :param string: unicode string, the unicode string to convert into an 
+1176          escaped US-ASCII form 
+1177      :returns: the US-ASCII escaped form of the inputted string 
+1178      :rtype: string 
+1179   
+1180      @author: Jonathan Benn 
+1181      ''' 
+1182      returnValue = StringIO() 
+1183   
+1184      for character in string: 
+1185          code = ord(character) 
+1186          if code > 0x7F: 
+1187              hexCode = hex(code) 
+1188              returnValue.write('%' + hexCode[2:4] + '%' + hexCode[4:6]) 
+1189          else: 
+1190              returnValue.write(character) 
+1191   
+1192      return returnValue.getvalue() 
+
    1193   
+1194   
+
    1195 -def unicode_to_ascii_authority(authority): 
+
    1196      ''' 
+1197      Follows the steps in RFC 3490, Section 4 to convert a unicode authority 
+1198      string into its ASCII equivalent. 
+1199      For example, u'www.Alliancefran\xe7aise.nu' will be converted into 
+1200      'www.xn--alliancefranaise-npb.nu' 
+1201   
+1202      :param authority: unicode string, the URL authority component to convert, 
+1203                        e.g. u'www.Alliancefran\xe7aise.nu' 
+1204      :returns: the US-ASCII character equivalent to the inputed authority, 
+1205               e.g. 'www.xn--alliancefranaise-npb.nu' 
+1206      :rtype: string 
+1207      :raises Exception: if the function is not able to convert the inputed 
+1208          authority 
+1209   
+1210      @author: Jonathan Benn 
+1211      ''' 
+1212      #RFC 3490, Section 4, Step 1 
+1213      #The encodings.idna Python module assumes that AllowUnassigned == True 
+1214   
+1215      #RFC 3490, Section 4, Step 2 
+1216      labels = label_split_regex.split(authority) 
+1217   
+1218      #RFC 3490, Section 4, Step 3 
+1219      #The encodings.idna Python module assumes that UseSTD3ASCIIRules == False 
+1220   
+1221      #RFC 3490, Section 4, Step 4 
+1222      #We use the ToASCII operation because we are about to put the authority 
+1223      #into an IDN-unaware slot 
+1224      asciiLabels = [] 
+1225      try: 
+1226          import encodings.idna 
+1227          for label in labels: 
+1228              if label: 
+1229                  asciiLabels.append(encodings.idna.ToASCII(label)) 
+1230              else: 
+1231                   #encodings.idna.ToASCII does not accept an empty string, but 
+1232                   #it is necessary for us to allow for empty labels so that we 
+1233                   #don't modify the URL 
+1234                  asciiLabels.append('') 
+1235      except: 
+1236          asciiLabels=[str(label) for label in labels] 
+1237      #RFC 3490, Section 4, Step 5 
+1238      return str(reduce(lambda x, y: x + unichr(0x002E) + y, asciiLabels)) 
+
    1239   
+1240   
+
    1241 -def unicode_to_ascii_url(url, prepend_scheme): 
+
    1242      ''' 
+1243      Converts the inputed unicode url into a US-ASCII equivalent. This function 
+1244      goes a little beyond RFC 3490, which is limited in scope to the domain name 
+1245      (authority) only. Here, the functionality is expanded to what was observed 
+1246      on Wikipedia on 2009-Jan-22: 
+1247   
+1248         Component    Can Use Unicode? 
+1249         ---------    ---------------- 
+1250         scheme       No 
+1251         authority    Yes 
+1252         path         Yes 
+1253         query        Yes 
+1254         fragment     No 
+1255   
+1256      The authority component gets converted to punycode, but occurrences of 
+1257      unicode in other components get converted into a pair of URI escapes (we 
+1258      assume 4-byte unicode). E.g. the unicode character U+4E2D will be 
+1259      converted into '%4E%2D'. Testing with Firefox v3.0.5 has shown that it can 
+1260      understand this kind of URI encoding. 
+1261   
+1262      :param url: unicode string, the URL to convert from unicode into US-ASCII 
+1263      :param prepend_scheme: string, a protocol scheme to prepend to the URL if 
+1264          we're having trouble parsing it. 
+1265          e.g. "http". Input None to disable this functionality 
+1266      :returns: a US-ASCII equivalent of the inputed url 
+1267      :rtype: string 
+1268   
+1269      @author: Jonathan Benn 
+1270      ''' 
+1271      #convert the authority component of the URL into an ASCII punycode string, 
+1272      #but encode the rest using the regular URI character encoding 
+1273   
+1274      groups = url_split_regex.match(url).groups() 
+1275      #If no authority was found 
+1276      if not groups[3]: 
+1277          #Try appending a scheme to see if that fixes the problem 
+1278          scheme_to_prepend = prepend_scheme or 'http' 
+1279          groups = url_split_regex.match( 
+1280              unicode(scheme_to_prepend) + u'://' + url).groups() 
+1281      #if we still can't find the authority 
+1282      if not groups[3]: 
+1283          raise Exception('No authority component found, '+ \ 
+1284              'could not decode unicode to US-ASCII') 
+1285   
+1286      #We're here if we found an authority, let's rebuild the URL 
+1287      scheme = groups[1] 
+1288      authority = groups[3] 
+1289      path = groups[4] or '' 
+1290      query = groups[5] or '' 
+1291      fragment = groups[7] or '' 
+1292   
+1293      if prepend_scheme: 
+1294          scheme = str(scheme) + '://' 
+1295      else: 
+1296          scheme = '' 
+1297      return scheme + unicode_to_ascii_authority(authority) +\ 
+1298          escape_unicode(path) + escape_unicode(query) + str(fragment) 
+
    1299   
+1300   
+
    1301 -class IS_GENERIC_URL(Validator): 
+
    1302      """ 
+1303      Rejects a URL string if any of the following is true: 
+1304         * The string is empty or None 
+1305         * The string uses characters that are not allowed in a URL 
+1306         * The URL scheme specified (if one is specified) is not valid 
+1307   
+1308      Based on RFC 2396: http://www.faqs.org/rfcs/rfc2396.html 
+1309   
+1310      This function only checks the URL's syntax. It does not check that the URL 
+1311      points to a real document, for example, or that it otherwise makes sense 
+1312      semantically. This function does automatically prepend 'http://' in front 
+1313      of a URL if and only if that's necessary to successfully parse the URL. 
+1314      Please note that a scheme will be prepended only for rare cases 
+1315      (e.g. 'google.ca:80') 
+1316   
+1317      The list of allowed schemes is customizable with the allowed_schemes 
+1318      parameter. If you exclude None from the list, then abbreviated URLs 
+1319      (lacking a scheme such as 'http') will be rejected. 
+1320   
+1321      The default prepended scheme is customizable with the prepend_scheme 
+1322      parameter. If you set prepend_scheme to None then prepending will be 
+1323      disabled. URLs that require prepending to parse will still be accepted, 
+1324      but the return value will not be modified. 
+1325   
+1326      @author: Jonathan Benn 
+1327   
+1328      >>> IS_GENERIC_URL()('http://user@abc.com') 
+1329      ('http://user@abc.com', None) 
+1330   
+1331      """ 
+1332   
+
    1333 -    def __init__( 
+1334          self, 
+1335          error_message='enter a valid URL', 
+1336          allowed_schemes=None, 
+1337          prepend_scheme=None, 
+1338          ): 
+
    1339          """ 
+1340          :param error_message: a string, the error message to give the end user 
+1341              if the URL does not validate 
+1342          :param allowed_schemes: a list containing strings or None. Each element 
+1343              is a scheme the inputed URL is allowed to use 
+1344          :param prepend_scheme: a string, this scheme is prepended if it's 
+1345              necessary to make the URL valid 
+1346          """ 
+1347   
+1348          self.error_message = error_message 
+1349          if allowed_schemes == None: 
+1350              self.allowed_schemes = all_url_schemes 
+1351          else: 
+1352              self.allowed_schemes = allowed_schemes 
+1353          self.prepend_scheme = prepend_scheme 
+1354          if self.prepend_scheme not in self.allowed_schemes: 
+1355              raise SyntaxError, \ 
+1356                  "prepend_scheme='%s' is not in allowed_schemes=%s" \ 
+1357                  % (self.prepend_scheme, self.allowed_schemes) 
+
    1358   
+
    1359 -    def __call__(self, value): 
+
    1360          """ 
+1361          :param value: a string, the URL to validate 
+1362          :returns: a tuple, where tuple[0] is the inputed value (possible 
+1363              prepended with prepend_scheme), and tuple[1] is either 
+1364              None (success!) or the string error_message 
+1365          """ 
+1366          try: 
+1367              # if the URL does not misuse the '%' character 
+1368              if not re.compile( 
+1369                  r"%[^0-9A-Fa-f]{2}|%[^0-9A-Fa-f][0-9A-Fa-f]|%[0-9A-Fa-f][^0-9A-Fa-f]|%$|%[0-9A-Fa-f]$|%[^0-9A-Fa-f]$" 
+1370                                ).search(value): 
+1371                  # if the URL is only composed of valid characters 
+1372                  if re.compile( 
+1373                      r"[A-Za-z0-9;/?:@&=+$,\-_\.!~*'\(\)%#]+$").match(value): 
+1374                      # Then split up the URL into its components and check on 
+1375                      # the scheme 
+1376                      scheme = url_split_regex.match(value).group(2) 
+1377                      # Clean up the scheme before we check it 
+1378                      if scheme != None: 
+1379                          scheme = urllib.unquote(scheme).lower() 
+1380                      # If the scheme really exists 
+1381                      if scheme in self.allowed_schemes: 
+1382                          # Then the URL is valid 
+1383                          return (value, None) 
+1384                      else: 
+1385                          # else, for the possible case of abbreviated URLs with 
+1386                          # ports, check to see if adding a valid scheme fixes 
+1387                          # the problem (but only do this if it doesn't have 
+1388                          # one already!) 
+1389                          if not re.compile('://').search(value) and None\ 
+1390                               in self.allowed_schemes: 
+1391                              schemeToUse = self.prepend_scheme or 'http' 
+1392                              prependTest = self.__call__(schemeToUse 
+1393                                       + '://' + value) 
+1394                              # if the prepend test succeeded 
+1395                              if prependTest[1] == None: 
+1396                                  # if prepending in the output is enabled 
+1397                                  if self.prepend_scheme: 
+1398                                      return prependTest 
+1399                                  else: 
+1400                                      # else return the original, 
+1401                                      #  non-prepended value 
+1402                                      return (value, None) 
+1403          except: 
+1404              pass 
+1405          # else the URL is not valid 
+1406          return (value, translate(self.error_message)) 
+
    1407   
+1408  # Sources (obtained 2008-Nov-11): 
+1409  #    http://en.wikipedia.org/wiki/Top-level_domain 
+1410  #    http://www.iana.org/domains/root/db/ 
+1411   
+1412  official_top_level_domains = [ 
+1413      'ac', 
+1414      'ad', 
+1415      'ae', 
+1416      'aero', 
+1417      'af', 
+1418      'ag', 
+1419      'ai', 
+1420      'al', 
+1421      'am', 
+1422      'an', 
+1423      'ao', 
+1424      'aq', 
+1425      'ar', 
+1426      'arpa', 
+1427      'as', 
+1428      'asia', 
+1429      'at', 
+1430      'au', 
+1431      'aw', 
+1432      'ax', 
+1433      'az', 
+1434      'ba', 
+1435      'bb', 
+1436      'bd', 
+1437      'be', 
+1438      'bf', 
+1439      'bg', 
+1440      'bh', 
+1441      'bi', 
+1442      'biz', 
+1443      'bj', 
+1444      'bl', 
+1445      'bm', 
+1446      'bn', 
+1447      'bo', 
+1448      'br', 
+1449      'bs', 
+1450      'bt', 
+1451      'bv', 
+1452      'bw', 
+1453      'by', 
+1454      'bz', 
+1455      'ca', 
+1456      'cat', 
+1457      'cc', 
+1458      'cd', 
+1459      'cf', 
+1460      'cg', 
+1461      'ch', 
+1462      'ci', 
+1463      'ck', 
+1464      'cl', 
+1465      'cm', 
+1466      'cn', 
+1467      'co', 
+1468      'com', 
+1469      'coop', 
+1470      'cr', 
+1471      'cu', 
+1472      'cv', 
+1473      'cx', 
+1474      'cy', 
+1475      'cz', 
+1476      'de', 
+1477      'dj', 
+1478      'dk', 
+1479      'dm', 
+1480      'do', 
+1481      'dz', 
+1482      'ec', 
+1483      'edu', 
+1484      'ee', 
+1485      'eg', 
+1486      'eh', 
+1487      'er', 
+1488      'es', 
+1489      'et', 
+1490      'eu', 
+1491      'example', 
+1492      'fi', 
+1493      'fj', 
+1494      'fk', 
+1495      'fm', 
+1496      'fo', 
+1497      'fr', 
+1498      'ga', 
+1499      'gb', 
+1500      'gd', 
+1501      'ge', 
+1502      'gf', 
+1503      'gg', 
+1504      'gh', 
+1505      'gi', 
+1506      'gl', 
+1507      'gm', 
+1508      'gn', 
+1509      'gov', 
+1510      'gp', 
+1511      'gq', 
+1512      'gr', 
+1513      'gs', 
+1514      'gt', 
+1515      'gu', 
+1516      'gw', 
+1517      'gy', 
+1518      'hk', 
+1519      'hm', 
+1520      'hn', 
+1521      'hr', 
+1522      'ht', 
+1523      'hu', 
+1524      'id', 
+1525      'ie', 
+1526      'il', 
+1527      'im', 
+1528      'in', 
+1529      'info', 
+1530      'int', 
+1531      'invalid', 
+1532      'io', 
+1533      'iq', 
+1534      'ir', 
+1535      'is', 
+1536      'it', 
+1537      'je', 
+1538      'jm', 
+1539      'jo', 
+1540      'jobs', 
+1541      'jp', 
+1542      'ke', 
+1543      'kg', 
+1544      'kh', 
+1545      'ki', 
+1546      'km', 
+1547      'kn', 
+1548      'kp', 
+1549      'kr', 
+1550      'kw', 
+1551      'ky', 
+1552      'kz', 
+1553      'la', 
+1554      'lb', 
+1555      'lc', 
+1556      'li', 
+1557      'lk', 
+1558      'localhost', 
+1559      'lr', 
+1560      'ls', 
+1561      'lt', 
+1562      'lu', 
+1563      'lv', 
+1564      'ly', 
+1565      'ma', 
+1566      'mc', 
+1567      'md', 
+1568      'me', 
+1569      'mf', 
+1570      'mg', 
+1571      'mh', 
+1572      'mil', 
+1573      'mk', 
+1574      'ml', 
+1575      'mm', 
+1576      'mn', 
+1577      'mo', 
+1578      'mobi', 
+1579      'mp', 
+1580      'mq', 
+1581      'mr', 
+1582      'ms', 
+1583      'mt', 
+1584      'mu', 
+1585      'museum', 
+1586      'mv', 
+1587      'mw', 
+1588      'mx', 
+1589      'my', 
+1590      'mz', 
+1591      'na', 
+1592      'name', 
+1593      'nc', 
+1594      'ne', 
+1595      'net', 
+1596      'nf', 
+1597      'ng', 
+1598      'ni', 
+1599      'nl', 
+1600      'no', 
+1601      'np', 
+1602      'nr', 
+1603      'nu', 
+1604      'nz', 
+1605      'om', 
+1606      'org', 
+1607      'pa', 
+1608      'pe', 
+1609      'pf', 
+1610      'pg', 
+1611      'ph', 
+1612      'pk', 
+1613      'pl', 
+1614      'pm', 
+1615      'pn', 
+1616      'pr', 
+1617      'pro', 
+1618      'ps', 
+1619      'pt', 
+1620      'pw', 
+1621      'py', 
+1622      'qa', 
+1623      're', 
+1624      'ro', 
+1625      'rs', 
+1626      'ru', 
+1627      'rw', 
+1628      'sa', 
+1629      'sb', 
+1630      'sc', 
+1631      'sd', 
+1632      'se', 
+1633      'sg', 
+1634      'sh', 
+1635      'si', 
+1636      'sj', 
+1637      'sk', 
+1638      'sl', 
+1639      'sm', 
+1640      'sn', 
+1641      'so', 
+1642      'sr', 
+1643      'st', 
+1644      'su', 
+1645      'sv', 
+1646      'sy', 
+1647      'sz', 
+1648      'tc', 
+1649      'td', 
+1650      'tel', 
+1651      'test', 
+1652      'tf', 
+1653      'tg', 
+1654      'th', 
+1655      'tj', 
+1656      'tk', 
+1657      'tl', 
+1658      'tm', 
+1659      'tn', 
+1660      'to', 
+1661      'tp', 
+1662      'tr', 
+1663      'travel', 
+1664      'tt', 
+1665      'tv', 
+1666      'tw', 
+1667      'tz', 
+1668      'ua', 
+1669      'ug', 
+1670      'uk', 
+1671      'um', 
+1672      'us', 
+1673      'uy', 
+1674      'uz', 
+1675      'va', 
+1676      'vc', 
+1677      've', 
+1678      'vg', 
+1679      'vi', 
+1680      'vn', 
+1681      'vu', 
+1682      'wf', 
+1683      'ws', 
+1684      'xn--0zwm56d', 
+1685      'xn--11b5bs3a9aj6g', 
+1686      'xn--80akhbyknj4f', 
+1687      'xn--9t4b11yi5a', 
+1688      'xn--deba0ad', 
+1689      'xn--g6w251d', 
+1690      'xn--hgbk6aj7f53bba', 
+1691      'xn--hlcj6aya9esc7a', 
+1692      'xn--jxalpdlp', 
+1693      'xn--kgbechtv', 
+1694      'xn--zckzah', 
+1695      'ye', 
+1696      'yt', 
+1697      'yu', 
+1698      'za', 
+1699      'zm', 
+1700      'zw', 
+1701      ] 
+1702   
+1703   
+
    1704 -class IS_HTTP_URL(Validator): 
+
    1705      """ 
+1706      Rejects a URL string if any of the following is true: 
+1707         * The string is empty or None 
+1708         * The string uses characters that are not allowed in a URL 
+1709         * The string breaks any of the HTTP syntactic rules 
+1710         * The URL scheme specified (if one is specified) is not 'http' or 'https' 
+1711         * The top-level domain (if a host name is specified) does not exist 
+1712   
+1713      Based on RFC 2616: http://www.faqs.org/rfcs/rfc2616.html 
+1714   
+1715      This function only checks the URL's syntax. It does not check that the URL 
+1716      points to a real document, for example, or that it otherwise makes sense 
+1717      semantically. This function does automatically prepend 'http://' in front 
+1718      of a URL in the case of an abbreviated URL (e.g. 'google.ca'). 
+1719   
+1720      The list of allowed schemes is customizable with the allowed_schemes 
+1721      parameter. If you exclude None from the list, then abbreviated URLs 
+1722      (lacking a scheme such as 'http') will be rejected. 
+1723   
+1724      The default prepended scheme is customizable with the prepend_scheme 
+1725      parameter. If you set prepend_scheme to None then prepending will be 
+1726      disabled. URLs that require prepending to parse will still be accepted, 
+1727      but the return value will not be modified. 
+1728   
+1729      @author: Jonathan Benn 
+1730   
+1731      >>> IS_HTTP_URL()('http://1.2.3.4') 
+1732      ('http://1.2.3.4', None) 
+1733      >>> IS_HTTP_URL()('http://abc.com') 
+1734      ('http://abc.com', None) 
+1735      >>> IS_HTTP_URL()('https://abc.com') 
+1736      ('https://abc.com', None) 
+1737      >>> IS_HTTP_URL()('httpx://abc.com') 
+1738      ('httpx://abc.com', 'enter a valid URL') 
+1739      >>> IS_HTTP_URL()('http://abc.com:80') 
+1740      ('http://abc.com:80', None) 
+1741      >>> IS_HTTP_URL()('http://user@abc.com') 
+1742      ('http://user@abc.com', None) 
+1743      >>> IS_HTTP_URL()('http://user@1.2.3.4') 
+1744      ('http://user@1.2.3.4', None) 
+1745   
+1746      """ 
+1747   
+
    1748 -    def __init__( 
+1749          self, 
+1750          error_message='enter a valid URL', 
+1751          allowed_schemes=None, 
+1752          prepend_scheme='http', 
+1753          ): 
+
    1754          """ 
+1755          :param error_message: a string, the error message to give the end user 
+1756              if the URL does not validate 
+1757          :param allowed_schemes: a list containing strings or None. Each element 
+1758              is a scheme the inputed URL is allowed to use 
+1759          :param prepend_scheme: a string, this scheme is prepended if it's 
+1760              necessary to make the URL valid 
+1761          """ 
+1762   
+1763          self.error_message = error_message 
+1764          if allowed_schemes == None: 
+1765              self.allowed_schemes = http_schemes 
+1766          else: 
+1767              self.allowed_schemes = allowed_schemes 
+1768          self.prepend_scheme = prepend_scheme 
+1769   
+1770          for i in self.allowed_schemes: 
+1771              if i not in http_schemes: 
+1772                  raise SyntaxError, \ 
+1773                      "allowed_scheme value '%s' is not in %s" % \ 
+1774                      (i, http_schemes) 
+1775   
+1776          if self.prepend_scheme not in self.allowed_schemes: 
+1777              raise SyntaxError, \ 
+1778                  "prepend_scheme='%s' is not in allowed_schemes=%s" % \ 
+1779                  (self.prepend_scheme, self.allowed_schemes) 
+
    1780   
+
    1781 -    def __call__(self, value): 
+
    1782          """ 
+1783          :param value: a string, the URL to validate 
+1784          :returns: a tuple, where tuple[0] is the inputed value 
+1785              (possible prepended with prepend_scheme), and tuple[1] is either 
+1786              None (success!) or the string error_message 
+1787          """ 
+1788   
+1789          try: 
+1790              # if the URL passes generic validation 
+1791              x = IS_GENERIC_URL(error_message=self.error_message, 
+1792                                 allowed_schemes=self.allowed_schemes, 
+1793                                 prepend_scheme=self.prepend_scheme) 
+1794              if x(value)[1] == None: 
+1795                  componentsMatch = url_split_regex.match(value) 
+1796                  authority = componentsMatch.group(4) 
+1797                  # if there is an authority component 
+1798                  if authority: 
+1799                      # if authority is a valid IP address 
+1800                      if re.compile( 
+1801                          "([\w.!~*'|;:&=+$,-]+@)?\d+\.\d+\.\d+\.\d+(:\d*)*$").match(authority): 
+1802                          # Then this HTTP URL is valid 
+1803                          return (value, None) 
+1804                      else: 
+1805                          # else if authority is a valid domain name 
+1806                          domainMatch = \ 
+1807                              re.compile( 
+1808                                  "([\w.!~*'|;:&=+$,-]+@)?(([A-Za-z0-9]+[A-Za-z0-9\-]*[A-Za-z0-9]+\.)*([A-Za-z0-9]+\.)*)*([A-Za-z]+[A-Za-z0-9\-]*[A-Za-z0-9]+)\.?(:\d*)*$" 
+1809                                  ).match(authority) 
+1810                          if domainMatch: 
+1811                              # if the top-level domain really exists 
+1812                              if domainMatch.group(5).lower()\ 
+1813                                   in official_top_level_domains: 
+1814                                  # Then this HTTP URL is valid 
+1815                                  return (value, None) 
+1816                  else: 
+1817                      # else this is a relative/abbreviated URL, which will parse 
+1818                      # into the URL's path component 
+1819                      path = componentsMatch.group(5) 
+1820                      # relative case: if this is a valid path (if it starts with 
+1821                      # a slash) 
+1822                      if re.compile('/').match(path): 
+1823                          # Then this HTTP URL is valid 
+1824                          return (value, None) 
+1825                      else: 
+1826                          # abbreviated case: if we haven't already, prepend a 
+1827                          # scheme and see if it fixes the problem 
+1828                          if not re.compile('://').search(value): 
+1829                              schemeToUse = self.prepend_scheme or 'http' 
+1830                              prependTest = self.__call__(schemeToUse 
+1831                                       + '://' + value) 
+1832                              # if the prepend test succeeded 
+1833                              if prependTest[1] == None: 
+1834                                  # if prepending in the output is enabled 
+1835                                  if self.prepend_scheme: 
+1836                                      return prependTest 
+1837                                  else: 
+1838                                      # else return the original, non-prepended 
+1839                                      # value 
+1840                                      return (value, None) 
+1841          except: 
+1842              pass 
+1843          # else the HTTP URL is not valid 
+1844          return (value, translate(self.error_message)) 
+
    1845   
+1846   
+
    1847 -class IS_URL(Validator): 
+
    1848      """ 
+1849      Rejects a URL string if any of the following is true: 
+1850         * The string is empty or None 
+1851         * The string uses characters that are not allowed in a URL 
+1852         * The string breaks any of the HTTP syntactic rules 
+1853         * The URL scheme specified (if one is specified) is not 'http' or 'https' 
+1854         * The top-level domain (if a host name is specified) does not exist 
+1855   
+1856      (These rules are based on RFC 2616: http://www.faqs.org/rfcs/rfc2616.html) 
+1857   
+1858      This function only checks the URL's syntax. It does not check that the URL 
+1859      points to a real document, for example, or that it otherwise makes sense 
+1860      semantically. This function does automatically prepend 'http://' in front 
+1861      of a URL in the case of an abbreviated URL (e.g. 'google.ca'). 
+1862   
+1863      If the parameter mode='generic' is used, then this function's behavior 
+1864      changes. It then rejects a URL string if any of the following is true: 
+1865         * The string is empty or None 
+1866         * The string uses characters that are not allowed in a URL 
+1867         * The URL scheme specified (if one is specified) is not valid 
+1868   
+1869      (These rules are based on RFC 2396: http://www.faqs.org/rfcs/rfc2396.html) 
+1870   
+1871      The list of allowed schemes is customizable with the allowed_schemes 
+1872      parameter. If you exclude None from the list, then abbreviated URLs 
+1873      (lacking a scheme such as 'http') will be rejected. 
+1874   
+1875      The default prepended scheme is customizable with the prepend_scheme 
+1876      parameter. If you set prepend_scheme to None then prepending will be 
+1877      disabled. URLs that require prepending to parse will still be accepted, 
+1878      but the return value will not be modified. 
+1879   
+1880      IS_URL is compatible with the Internationalized Domain Name (IDN) standard 
+1881      specified in RFC 3490 (http://tools.ietf.org/html/rfc3490). As a result, 
+1882      URLs can be regular strings or unicode strings. 
+1883      If the URL's domain component (e.g. google.ca) contains non-US-ASCII 
+1884      letters, then the domain will be converted into Punycode (defined in 
+1885      RFC 3492, http://tools.ietf.org/html/rfc3492). IS_URL goes a bit beyond 
+1886      the standards, and allows non-US-ASCII characters to be present in the path 
+1887      and query components of the URL as well. These non-US-ASCII characters will 
+1888      be escaped using the standard '%20' type syntax. e.g. the unicode 
+1889      character with hex code 0x4e86 will become '%4e%86' 
+1890   
+1891      Code Examples:: 
+1892   
+1893          INPUT(_type='text', _name='name', requires=IS_URL()) 
+1894          >>> IS_URL()('abc.com') 
+1895          ('http://abc.com', None) 
+1896   
+1897          INPUT(_type='text', _name='name', requires=IS_URL(mode='generic')) 
+1898          >>> IS_URL(mode='generic')('abc.com') 
+1899          ('abc.com', None) 
+1900   
+1901          INPUT(_type='text', _name='name', 
+1902              requires=IS_URL(allowed_schemes=['https'], prepend_scheme='https')) 
+1903          >>> IS_URL(allowed_schemes=['https'], prepend_scheme='https')('https://abc.com') 
+1904          ('https://abc.com', None) 
+1905   
+1906          INPUT(_type='text', _name='name', 
+1907              requires=IS_URL(prepend_scheme='https')) 
+1908          >>> IS_URL(prepend_scheme='https')('abc.com') 
+1909          ('https://abc.com', None) 
+1910   
+1911          INPUT(_type='text', _name='name', 
+1912              requires=IS_URL(mode='generic', allowed_schemes=['ftps', 'https'], 
+1913                  prepend_scheme='https')) 
+1914          >>> IS_URL(mode='generic', allowed_schemes=['ftps', 'https'], prepend_scheme='https')('https://abc.com') 
+1915          ('https://abc.com', None) 
+1916          >>> IS_URL(mode='generic', allowed_schemes=['ftps', 'https', None], prepend_scheme='https')('abc.com') 
+1917          ('abc.com', None) 
+1918   
+1919      @author: Jonathan Benn 
+1920      """ 
+1921   
+
    1922 -    def __init__( 
+1923          self, 
+1924          error_message='enter a valid URL', 
+1925          mode='http', 
+1926          allowed_schemes=None, 
+1927          prepend_scheme='http', 
+1928          ): 
+
    1929          """ 
+1930          :param error_message: a string, the error message to give the end user 
+1931              if the URL does not validate 
+1932          :param allowed_schemes: a list containing strings or None. Each element 
+1933              is a scheme the inputed URL is allowed to use 
+1934          :param prepend_scheme: a string, this scheme is prepended if it's 
+1935              necessary to make the URL valid 
+1936          """ 
+1937   
+1938          self.error_message = error_message 
+1939          self.mode = mode.lower() 
+1940          if not self.mode in ['generic', 'http']: 
+1941              raise SyntaxError, "invalid mode '%s' in IS_URL" % self.mode 
+1942          self.allowed_schemes = allowed_schemes 
+1943   
+1944          if self.allowed_schemes: 
+1945              if prepend_scheme not in self.allowed_schemes: 
+1946                  raise SyntaxError, \ 
+1947                      "prepend_scheme='%s' is not in allowed_schemes=%s" \ 
+1948                      % (prepend_scheme, self.allowed_schemes) 
+1949   
+1950          # if allowed_schemes is None, then we will defer testing 
+1951          # prepend_scheme's validity to a sub-method 
+1952   
+1953          self.prepend_scheme = prepend_scheme 
+
    1954   
+
    1955 -    def __call__(self, value): 
+
    1956          """ 
+1957          :param value: a unicode or regular string, the URL to validate 
+1958          :returns: a (string, string) tuple, where tuple[0] is the modified 
+1959              input value and tuple[1] is either None (success!) or the 
+1960              string error_message. The input value will never be modified in the 
+1961              case of an error. However, if there is success then the input URL 
+1962              may be modified to (1) prepend a scheme, and/or (2) convert a 
+1963              non-compliant unicode URL into a compliant US-ASCII version. 
+1964          """ 
+1965   
+1966          if self.mode == 'generic': 
+1967              subMethod = IS_GENERIC_URL(error_message=self.error_message, 
+1968                                         allowed_schemes=self.allowed_schemes, 
+1969                                         prepend_scheme=self.prepend_scheme) 
+1970          elif self.mode == 'http': 
+1971              subMethod = IS_HTTP_URL(error_message=self.error_message, 
+1972                                      allowed_schemes=self.allowed_schemes, 
+1973                                      prepend_scheme=self.prepend_scheme) 
+1974          else: 
+1975              raise SyntaxError, "invalid mode '%s' in IS_URL" % self.mode 
+1976   
+1977          if type(value) != unicode: 
+1978              return subMethod(value) 
+1979          else: 
+1980              try: 
+1981                  asciiValue = unicode_to_ascii_url(value, self.prepend_scheme) 
+1982              except Exception: 
+1983                  #If we are not able to convert the unicode url into a 
+1984                  # US-ASCII URL, then the URL is not valid 
+1985                  return (value, translate(self.error_message)) 
+1986   
+1987              methodResult = subMethod(asciiValue) 
+1988              #if the validation of the US-ASCII version of the value failed 
+1989              if methodResult[1] != None: 
+1990                  # then return the original input value, not the US-ASCII version 
+1991                  return (value, methodResult[1]) 
+1992              else: 
+1993                  return methodResult 
+
    1994   
+1995   
+1996  regex_time = re.compile( 
+1997      '((?P<h>[0-9]+))([^0-9 ]+(?P<m>[0-9 ]+))?([^0-9ap ]+(?P<s>[0-9]*))?((?P<d>[ap]m))?') 
+1998   
+1999   
+
    2000 -class IS_TIME(Validator): 
+
    2001      """ 
+2002      example:: 
+2003   
+2004          INPUT(_type='text', _name='name', requires=IS_TIME()) 
+2005   
+2006      understands the following formats 
+2007      hh:mm:ss [am/pm] 
+2008      hh:mm [am/pm] 
+2009      hh [am/pm] 
+2010   
+2011      [am/pm] is optional, ':' can be replaced by any other non-space non-digit 
+2012   
+2013          >>> IS_TIME()('21:30') 
+2014          (datetime.time(21, 30), None) 
+2015          >>> IS_TIME()('21-30') 
+2016          (datetime.time(21, 30), None) 
+2017          >>> IS_TIME()('21.30') 
+2018          (datetime.time(21, 30), None) 
+2019          >>> IS_TIME()('21:30:59') 
+2020          (datetime.time(21, 30, 59), None) 
+2021          >>> IS_TIME()('5:30') 
+2022          (datetime.time(5, 30), None) 
+2023          >>> IS_TIME()('5:30 am') 
+2024          (datetime.time(5, 30), None) 
+2025          >>> IS_TIME()('5:30 pm') 
+2026          (datetime.time(17, 30), None) 
+2027          >>> IS_TIME()('5:30 whatever') 
+2028          ('5:30 whatever', 'enter time as hh:mm:ss (seconds, am, pm optional)') 
+2029          >>> IS_TIME()('5:30 20') 
+2030          ('5:30 20', 'enter time as hh:mm:ss (seconds, am, pm optional)') 
+2031          >>> IS_TIME()('24:30') 
+2032          ('24:30', 'enter time as hh:mm:ss (seconds, am, pm optional)') 
+2033          >>> IS_TIME()('21:60') 
+2034          ('21:60', 'enter time as hh:mm:ss (seconds, am, pm optional)') 
+2035          >>> IS_TIME()('21:30::') 
+2036          ('21:30::', 'enter time as hh:mm:ss (seconds, am, pm optional)') 
+2037          >>> IS_TIME()('') 
+2038          ('', 'enter time as hh:mm:ss (seconds, am, pm optional)') 
+2039      """ 
+2040   
+
    2041 -    def __init__(self, error_message='enter time as hh:mm:ss (seconds, am, pm optional)'): 
+
    2042          self.error_message = error_message 
+
    2043   
+
    2044 -    def __call__(self, value): 
+
    2045          try: 
+2046              ivalue = value 
+2047              value = regex_time.match(value.lower()) 
+2048              (h, m, s) = (int(value.group('h')), 0, 0) 
+2049              if value.group('m') != None: 
+2050                  m = int(value.group('m')) 
+2051              if value.group('s') != None: 
+2052                  s = int(value.group('s')) 
+2053              if value.group('d') == 'pm' and 0 < h < 12: 
+2054                  h = h + 12 
+2055              if not (h in range(24) and m in range(60) and s 
+2056                       in range(60)): 
+2057                  raise ValueError\ 
+2058                      ('Hours or minutes or seconds are outside of allowed range') 
+2059              value = datetime.time(h, m, s) 
+2060              return (value, None) 
+2061          except AttributeError: 
+2062              pass 
+2063          except ValueError: 
+2064              pass 
+2065          return (ivalue, translate(self.error_message)) 
+
    2066   
+2067   
+
    2068 -class IS_DATE(Validator): 
+
    2069      """ 
+2070      example:: 
+2071   
+2072          INPUT(_type='text', _name='name', requires=IS_DATE()) 
+2073   
+2074      date has to be in the ISO8960 format YYYY-MM-DD 
+2075      """ 
+2076   
+
    2077 -    def __init__(self, format='%Y-%m-%d', 
+2078                   error_message='enter date as %(format)s'): 
+
    2079          self.format = str(format) 
+2080          self.error_message = str(error_message) 
+
    2081   
+
    2082 -    def __call__(self, value): 
+
    2083          if isinstance(value,datetime.date): 
+2084              return (value,None) 
+2085          try: 
+2086              (y, m, d, hh, mm, ss, t0, t1, t2) = \ 
+2087                  time.strptime(value, str(self.format)) 
+2088              value = datetime.date(y, m, d) 
+2089              return (value, None) 
+2090          except: 
+2091              return (value, translate(self.error_message) % IS_DATETIME.nice(self.format)) 
+
    2092   
+
    2093 -    def formatter(self, value): 
+
    2094          format = self.format 
+2095          year = value.year 
+2096          y = '%.4i' % year 
+2097          format = format.replace('%y',y[-2:]) 
+2098          format = format.replace('%Y',y) 
+2099          if year<1900: 
+2100              year = 2000 
+2101          d = datetime.date(year,value.month,value.day) 
+2102          return d.strftime(format) 
+
    2103   
+2104   
+
    2105 -class IS_DATETIME(Validator): 
+
    2106      """ 
+2107      example:: 
+2108   
+2109          INPUT(_type='text', _name='name', requires=IS_DATETIME()) 
+2110   
+2111      datetime has to be in the ISO8960 format YYYY-MM-DD hh:mm:ss 
+2112      """ 
+2113   
+2114      isodatetime = '%Y-%m-%d %H:%M:%S' 
+2115   
+2116      @staticmethod 
+
    2117 -    def nice(format): 
+
    2118          code=(('%Y','1963'), 
+2119                ('%y','63'), 
+2120                ('%d','28'), 
+2121                ('%m','08'), 
+2122                ('%b','Aug'), 
+2123                ('%b','August'), 
+2124                ('%H','14'), 
+2125                ('%I','02'), 
+2126                ('%p','PM'), 
+2127                ('%M','30'), 
+2128                ('%S','59')) 
+2129          for (a,b) in code: 
+2130              format=format.replace(a,b) 
+2131          return dict(format=format) 
+
    2132   
+
    2133 -    def __init__(self, format='%Y-%m-%d %H:%M:%S', 
+2134                   error_message='enter date and time as %(format)s'): 
+
    2135          self.format = str(format) 
+2136          self.error_message = str(error_message) 
+
    2137   
+
    2138 -    def __call__(self, value): 
+
    2139          if isinstance(value,datetime.datetime): 
+2140              return (value,None) 
+2141          try: 
+2142              (y, m, d, hh, mm, ss, t0, t1, t2) = \ 
+2143                  time.strptime(value, str(self.format)) 
+2144              value = datetime.datetime(y, m, d, hh, mm, ss) 
+2145              return (value, None) 
+2146          except: 
+2147              return (value, translate(self.error_message) % IS_DATETIME.nice(self.format)) 
+
    2148   
+
    2149 -    def formatter(self, value): 
+
    2150          format = self.format 
+2151          year = value.year 
+2152          y = '%.4i' % year 
+2153          format = format.replace('%y',y[-2:]) 
+2154          format = format.replace('%Y',y) 
+2155          if year<1900: 
+2156              year = 2000 
+2157          d = datetime.datetime(year,value.month,value.day,value.hour,value.minute,value.second) 
+2158          return d.strftime(format) 
+
    2159   
+
    2160 -class IS_DATE_IN_RANGE(IS_DATE): 
+
    2161      """ 
+2162      example:: 
+2163   
+2164          >>> v = IS_DATE_IN_RANGE(minimum=datetime.date(2008,1,1), \ 
+2165                                   maximum=datetime.date(2009,12,31), \ 
+2166                                   format="%m/%d/%Y",error_message="oops") 
+2167   
+2168          >>> v('03/03/2008') 
+2169          (datetime.date(2008, 3, 3), None) 
+2170   
+2171          >>> v('03/03/2010') 
+2172          (datetime.date(2010, 3, 3), 'oops') 
+2173   
+2174          >>> v(datetime.date(2008,3,3)) 
+2175          (datetime.date(2008, 3, 3), None) 
+2176   
+2177          >>> v(datetime.date(2010,3,3)) 
+2178          (datetime.date(2010, 3, 3), 'oops') 
+2179   
+2180      """ 
+
    2181 -    def __init__(self, 
+2182                   minimum = None, 
+2183                   maximum = None, 
+2184                   format='%Y-%m-%d', 
+2185                   error_message = None): 
+
    2186          self.minimum = minimum 
+2187          self.maximum = maximum 
+2188          if error_message is None: 
+2189              if minimum is None: 
+2190                  error_message = "enter date on or before %(max)s" 
+2191              elif maximum is None: 
+2192                  error_message = "enter date on or after %(min)s" 
+2193              else: 
+2194                  error_message = "enter date in range %(min)s %(max)s" 
+2195          d = dict(min=minimum, max=maximum) 
+2196          IS_DATE.__init__(self, 
+2197                           format = format, 
+2198                           error_message = error_message % d) 
+
    2199   
+
    2200 -    def __call__(self, value): 
+
    2201          (value, msg) = IS_DATE.__call__(self,value) 
+2202          if msg is not None: 
+2203              return (value, msg) 
+2204          if self.minimum and self.minimum > value: 
+2205              return (value, translate(self.error_message)) 
+2206          if self.maximum and value > self.maximum: 
+2207              return (value, translate(self.error_message)) 
+2208          return (value, None) 
+
    2209   
+2210   
+
    2211 -class IS_DATETIME_IN_RANGE(IS_DATETIME): 
+
    2212      """ 
+2213      example:: 
+2214   
+2215          >>> v = IS_DATETIME_IN_RANGE(\ 
+2216                  minimum=datetime.datetime(2008,1,1,12,20), \ 
+2217                  maximum=datetime.datetime(2009,12,31,12,20), \ 
+2218                  format="%m/%d/%Y %H:%M",error_message="oops") 
+2219          >>> v('03/03/2008 12:40') 
+2220          (datetime.datetime(2008, 3, 3, 12, 40), None) 
+2221   
+2222          >>> v('03/03/2010 10:34') 
+2223          (datetime.datetime(2010, 3, 3, 10, 34), 'oops') 
+2224   
+2225          >>> v(datetime.datetime(2008,3,3,0,0)) 
+2226          (datetime.datetime(2008, 3, 3, 0, 0), None) 
+2227   
+2228          >>> v(datetime.datetime(2010,3,3,0,0)) 
+2229          (datetime.datetime(2010, 3, 3, 0, 0), 'oops') 
+2230      """ 
+
    2231 -    def __init__(self, 
+2232                   minimum = None, 
+2233                   maximum = None, 
+2234                   format = '%Y-%m-%d %H:%M:%S', 
+2235                   error_message = None): 
+
    2236          self.minimum = minimum 
+2237          self.maximum = maximum 
+2238          if error_message is None: 
+2239              if minimum is None: 
+2240                  error_message = "enter date and time on or before %(max)s" 
+2241              elif maximum is None: 
+2242                  error_message = "enter date and time on or after %(min)s" 
+2243              else: 
+2244                  error_message = "enter date and time in range %(min)s %(max)s" 
+2245          d = dict(min = minimum, max = maximum) 
+2246          IS_DATETIME.__init__(self, 
+2247                           format = format, 
+2248                           error_message = error_message % d) 
+
    2249   
+
    2250 -    def __call__(self, value): 
+
    2251          (value, msg) = IS_DATETIME.__call__(self, value) 
+2252          if msg is not None: 
+2253              return (value, msg) 
+2254          if self.minimum and self.minimum > value: 
+2255              return (value, translate(self.error_message)) 
+2256          if self.maximum and value > self.maximum: 
+2257              return (value, translate(self.error_message)) 
+2258          return (value, None) 
+
    2259   
+2260   
+
    2261 -class IS_LIST_OF(Validator): 
+
    2262   
+
    2263 -    def __init__(self, other): 
+
    2264          self.other = other 
+
    2265   
+
    2266 -    def __call__(self, value): 
+
    2267          ivalue = value 
+2268          if not isinstance(value, list): 
+2269              ivalue = [ivalue] 
+2270          new_value = [] 
+2271          for item in ivalue: 
+2272              (v, e) = self.other(item) 
+2273              if e: 
+2274                  return (value, e) 
+2275              else: 
+2276                  new_value.append(v) 
+2277          return (new_value, None) 
+
    2278   
+2279   
+
    2280 -class IS_LOWER(Validator): 
+
    2281      """ 
+2282      convert to lower case 
+2283   
+2284      >>> IS_LOWER()('ABC') 
+2285      ('abc', None) 
+2286      >>> IS_LOWER()('Ñ') 
+2287      ('\\xc3\\xb1', None) 
+2288      """ 
+2289   
+
    2290 -    def __call__(self, value): 
+
    2291          return (value.decode('utf8').lower().encode('utf8'), None) 
+
    2292   
+2293   
+
    2294 -class IS_UPPER(Validator): 
+
    2295      """ 
+2296      convert to upper case 
+2297   
+2298      >>> IS_UPPER()('abc') 
+2299      ('ABC', None) 
+2300      >>> IS_UPPER()('ñ') 
+2301      ('\\xc3\\x91', None) 
+2302      """ 
+2303   
+
    2304 -    def __call__(self, value): 
+
    2305          return (value.decode('utf8').upper().encode('utf8'), None) 
+
    2306   
+2307   
+
    2308 -def urlify(value, maxlen=80, keep_underscores=False): 
+
    2309      """ 
+2310      Convert incoming string to a simplified ASCII subset. 
+2311      if (keep_underscores): underscores are retained in the string 
+2312      else: underscores are translated to hyphens (default) 
+2313      """ 
+2314      s = value.lower()                     # to lowercase 
+2315      s = s.decode('utf-8')                 # to utf-8 
+2316      s = unicodedata.normalize('NFKD', s)  # normalize eg è => e, ñ => n 
+2317      s = s.encode('ASCII', 'ignore')       # encode as ASCII 
+2318      s = re.sub('&\w+;', '', s)            # strip html entities 
+2319      if keep_underscores: 
+2320          s = re.sub('\s+', '-', s)         # whitespace to hyphens 
+2321          s = re.sub('[^\w\-]', '', s)      # strip all but alphanumeric/underscore/hyphen 
+2322      else: 
+2323          s = re.sub('[\s_]+', '-', s)      # whitespace & underscores to hyphens 
+2324          s = re.sub('[^a-z0-9\-]', '', s)  # strip all but alphanumeric/hyphen 
+2325      s = re.sub('[-_][-_]+', '-', s)       # collapse strings of hyphens 
+2326      s = s.strip('-')                      # remove leading and trailing hyphens 
+2327      return s[:maxlen]                     # enforce maximum length 
+
    2328   
+2329   
+
    2330 -class IS_SLUG(Validator): 
+
    2331      """ 
+2332      convert arbitrary text string to a slug 
+2333   
+2334      >>> IS_SLUG()('abc123') 
+2335      ('abc123', None) 
+2336      >>> IS_SLUG()('ABC123') 
+2337      ('abc123', None) 
+2338      >>> IS_SLUG()('abc-123') 
+2339      ('abc-123', None) 
+2340      >>> IS_SLUG()('abc--123') 
+2341      ('abc-123', None) 
+2342      >>> IS_SLUG()('abc 123') 
+2343      ('abc-123', None) 
+2344      >>> IS_SLUG()('abc\t_123') 
+2345      ('abc-123', None) 
+2346      >>> IS_SLUG()('-abc-') 
+2347      ('abc', None) 
+2348      >>> IS_SLUG()('--a--b--_ -c--') 
+2349      ('a-b-c', None) 
+2350      >>> IS_SLUG()('abc&amp;123') 
+2351      ('abc123', None) 
+2352      >>> IS_SLUG()('abc&amp;123&amp;def') 
+2353      ('abc123def', None) 
+2354      >>> IS_SLUG()('ñ') 
+2355      ('n', None) 
+2356      >>> IS_SLUG(maxlen=4)('abc123') 
+2357      ('abc1', None) 
+2358      >>> IS_SLUG()('abc_123') 
+2359      ('abc-123', None) 
+2360      >>> IS_SLUG(keep_underscores=False)('abc_123') 
+2361      ('abc-123', None) 
+2362      >>> IS_SLUG(keep_underscores=True)('abc_123') 
+2363      ('abc_123', None) 
+2364      >>> IS_SLUG(check=False)('abc') 
+2365      ('abc', None) 
+2366      >>> IS_SLUG(check=True)('abc') 
+2367      ('abc', None) 
+2368      >>> IS_SLUG(check=False)('a bc') 
+2369      ('a-bc', None) 
+2370      >>> IS_SLUG(check=True)('a bc') 
+2371      ('a bc', 'must be slug') 
+2372      """ 
+2373   
+2374      @staticmethod 
+
    2375 -    def urlify(value, maxlen=80, keep_underscores=False): 
+
    2376          return urlify(value, maxlen, keep_underscores) 
+
    2377   
+
    2378 -    def __init__(self, maxlen=80, check=False, error_message='must be slug', keep_underscores=False): 
+
    2379          self.maxlen = maxlen 
+2380          self.check = check 
+2381          self.error_message = error_message 
+2382          self.keep_underscores = keep_underscores 
+
    2383   
+
    2384 -    def __call__(self, value): 
+
    2385          if self.check and value != urlify(value, self.maxlen, self.keep_underscores): 
+2386              return (value, translate(self.error_message)) 
+2387          return (urlify(value,self.maxlen, self.keep_underscores), None) 
+
    2388   
+
    2389 -class IS_EMPTY_OR(Validator): 
+
    2390      """ 
+2391      dummy class for testing IS_EMPTY_OR 
+2392   
+2393      >>> IS_EMPTY_OR(IS_EMAIL())('abc@def.com') 
+2394      ('abc@def.com', None) 
+2395      >>> IS_EMPTY_OR(IS_EMAIL())('   ') 
+2396      (None, None) 
+2397      >>> IS_EMPTY_OR(IS_EMAIL(), null='abc')('   ') 
+2398      ('abc', None) 
+2399      >>> IS_EMPTY_OR(IS_EMAIL(), null='abc', empty_regex='def')('def') 
+2400      ('abc', None) 
+2401      >>> IS_EMPTY_OR(IS_EMAIL())('abc') 
+2402      ('abc', 'enter a valid email address') 
+2403      >>> IS_EMPTY_OR(IS_EMAIL())(' abc ') 
+2404      ('abc', 'enter a valid email address') 
+2405      """ 
+2406   
+
    2407 -    def __init__(self, other, null=None, empty_regex=None): 
+
    2408          (self.other, self.null) = (other, null) 
+2409          if empty_regex is not None: 
+2410              self.empty_regex = re.compile(empty_regex) 
+2411          else: 
+2412              self.empty_regex = None 
+2413          if hasattr(other, 'multiple'): 
+2414              self.multiple = other.multiple 
+2415          if hasattr(other, 'options'): 
+2416              self.options=self._options 
+
    2417   
+
    2418 -    def _options(self): 
+
    2419          options = self.other.options() 
+2420          if (not options or options[0][0]!='') and not self.multiple: 
+2421              options.insert(0,('','')) 
+2422          return options 
+
    2423   
+
    2424 -    def set_self_id(self, id): 
+
    2425          if isinstance(self.other, (list, tuple)): 
+2426              for item in self.other: 
+2427                  if hasattr(item, 'set_self_id'): 
+2428                      item.set_self_id(id) 
+2429          else: 
+2430              if hasattr(self.other, 'set_self_id'): 
+2431                  self.other.set_self_id(id) 
+
    2432   
+
    2433 -    def __call__(self, value): 
+
    2434          value, empty = is_empty(value, empty_regex=self.empty_regex) 
+2435          if empty: 
+2436              return (self.null, None) 
+2437          if isinstance(self.other, (list, tuple)): 
+2438              for item in self.other: 
+2439                  value, error = item(value) 
+2440                  if error: break 
+2441              return value, error 
+2442          else: 
+2443              return self.other(value) 
+
    2444   
+
    2445 -    def formatter(self, value): 
+
    2446          if hasattr(self.other, 'formatter'): 
+2447              return self.other.formatter(value) 
+2448          return value 
+
    2449   
+2450  IS_NULL_OR = IS_EMPTY_OR    # for backward compatibility 
+2451   
+2452   
+
    2453 -class CLEANUP(Validator): 
+
    2454      """ 
+2455      example:: 
+2456   
+2457          INPUT(_type='text', _name='name', requires=CLEANUP()) 
+2458   
+2459      removes special characters on validation 
+2460      """ 
+2461   
+
    2462 -    def __init__(self, regex='[^\x09\x0a\x0d\x20-\x7e]'): 
+
    2463          self.regex = re.compile(regex) 
+
    2464   
+
    2465 -    def __call__(self, value): 
+
    2466          v = self.regex.sub('',str(value).strip()) 
+2467          return (v, None) 
+
    2468   
+2469   
+
    2470 -class CRYPT(object): 
+
    2471      """ 
+2472      example:: 
+2473   
+2474          INPUT(_type='text', _name='name', requires=CRYPT()) 
+2475   
+2476      encodes the value on validation with a digest. 
+2477   
+2478      If no arguments are provided CRYPT uses the MD5 algorithm. 
+2479      If the key argument is provided the HMAC+MD5 algorithm is used. 
+2480      If the digest_alg is specified this is used to replace the 
+2481      MD5 with, for example, SHA512. The digest_alg can be 
+2482      the name of a hashlib algorithm as a string or the algorithm itself. 
+2483      """ 
+2484   
+
    2485 -    def __init__(self, key=None, digest_alg='md5'): 
+
    2486          self.key = key 
+2487          self.digest_alg = digest_alg 
+
    2488   
+
    2489 -    def __call__(self, value): 
+
    2490          if self.key: 
+2491              return (hmac_hash(value, self.key, self.digest_alg), None) 
+2492          else: 
+2493              return (simple_hash(value, self.digest_alg), None) 
+
    2494   
+2495   
+
    2496 -class IS_STRONG(object): 
+
    2497      """ 
+2498      example:: 
+2499   
+2500          INPUT(_type='password', _name='passwd', 
+2501              requires=IS_STRONG(min=10, special=2, upper=2)) 
+2502   
+2503      enforces complexity requirements on a field 
+2504      """ 
+2505   
+
    2506 -    def __init__(self, min=8, max=20, upper=1, lower=1, number=1, 
+2507                   special=1, specials=r'~!@#$%^&*()_+-=?<>,.:;{}[]|', 
+2508                   invalid=' "', error_message=None): 
+
    2509          self.min = min 
+2510          self.max = max 
+2511          self.upper = upper 
+2512          self.lower = lower 
+2513          self.number = number 
+2514          self.special = special 
+2515          self.specials = specials 
+2516          self.invalid = invalid 
+2517          self.error_message = error_message 
+
    2518   
+
    2519 -    def __call__(self, value): 
+
    2520          failures = [] 
+2521          if type(self.min) == int and self.min > 0: 
+2522              if not len(value) >= self.min: 
+2523                  failures.append("Minimum length is %s" % self.min) 
+2524          if type(self.max) == int and self.max > 0: 
+2525              if not len(value) <= self.max: 
+2526                  failures.append("Maximum length is %s" % self.max) 
+2527          if type(self.special) == int: 
+2528              all_special = [ch in value for ch in self.specials] 
+2529              if self.special > 0: 
+2530                  if not all_special.count(True) >= self.special: 
+2531                      failures.append("Must include at least %s of the following : %s" % (self.special, self.specials)) 
+2532          if self.invalid: 
+2533              all_invalid = [ch in value for ch in self.invalid] 
+2534              if all_invalid.count(True) > 0: 
+2535                  failures.append("May not contain any of the following: %s" \ 
+2536                      % self.invalid) 
+2537          if type(self.upper) == int: 
+2538              all_upper = re.findall("[A-Z]", value) 
+2539              if self.upper > 0: 
+2540                  if not len(all_upper) >= self.upper: 
+2541                      failures.append("Must include at least %s upper case" \ 
+2542                          % str(self.upper)) 
+2543              else: 
+2544                  if len(all_upper) > 0: 
+2545                      failures.append("May not include any upper case letters") 
+2546          if type(self.lower) == int: 
+2547              all_lower = re.findall("[a-z]", value) 
+2548              if self.lower > 0: 
+2549                  if not len(all_lower) >= self.lower: 
+2550                      failures.append("Must include at least %s lower case" \ 
+2551                          % str(self.lower)) 
+2552              else: 
+2553                  if len(all_lower) > 0: 
+2554                      failures.append("May not include any lower case letters") 
+2555          if type(self.number) == int: 
+2556              all_number = re.findall("[0-9]", value) 
+2557              if self.number > 0: 
+2558                  numbers = "number" 
+2559                  if self.number > 1: 
+2560                      numbers = "numbers" 
+2561                  if not len(all_number) >= self.number: 
+2562                      failures.append("Must include at least %s %s" \ 
+2563                          % (str(self.number), numbers)) 
+2564              else: 
+2565                  if len(all_number) > 0: 
+2566                      failures.append("May not include any numbers") 
+2567          if len(failures) == 0: 
+2568              return (value, None) 
+2569          if not translate(self.error_message): 
+2570              from html import XML 
+2571              return (value, XML('<br />'.join(failures))) 
+2572          else: 
+2573              return (value, translate(self.error_message)) 
+
    2574   
+2575   
+
    2576 -class IS_IN_SUBSET(IS_IN_SET): 
+
    2577   
+
    2578 -    def __init__(self, *a, **b): 
+
    2579          IS_IN_SET.__init__(self, *a, **b) 
+
    2580   
+
    2581 -    def __call__(self, value): 
+
    2582          values = re.compile("\w+").findall(str(value)) 
+2583          failures = [x for x in values if IS_IN_SET.__call__(self, x)[1]] 
+2584          if failures: 
+2585              return (value, translate(self.error_message)) 
+2586          return (value, None) 
+
    2587   
+2588   
+
    2589 -class IS_IMAGE(Validator): 
+
    2590      """ 
+2591      Checks if file uploaded through file input was saved in one of selected 
+2592      image formats and has dimensions (width and height) within given boundaries. 
+2593   
+2594      Does *not* check for maximum file size (use IS_LENGTH for that). Returns 
+2595      validation failure if no data was uploaded. 
+2596   
+2597      Supported file formats: BMP, GIF, JPEG, PNG. 
+2598   
+2599      Code parts taken from 
+2600      http://mail.python.org/pipermail/python-list/2007-June/617126.html 
+2601   
+2602      Arguments: 
+2603   
+2604      extensions: iterable containing allowed *lowercase* image file extensions 
+2605      ('jpg' extension of uploaded file counts as 'jpeg') 
+2606      maxsize: iterable containing maximum width and height of the image 
+2607      minsize: iterable containing minimum width and height of the image 
+2608   
+2609      Use (-1, -1) as minsize to pass image size check. 
+2610   
+2611      Examples:: 
+2612   
+2613          #Check if uploaded file is in any of supported image formats: 
+2614          INPUT(_type='file', _name='name', requires=IS_IMAGE()) 
+2615   
+2616          #Check if uploaded file is either JPEG or PNG: 
+2617          INPUT(_type='file', _name='name', 
+2618              requires=IS_IMAGE(extensions=('jpeg', 'png'))) 
+2619   
+2620          #Check if uploaded file is PNG with maximum size of 200x200 pixels: 
+2621          INPUT(_type='file', _name='name', 
+2622              requires=IS_IMAGE(extensions=('png'), maxsize=(200, 200))) 
+2623      """ 
+2624   
+
    2625 -    def __init__(self, 
+2626                   extensions=('bmp', 'gif', 'jpeg', 'png'), 
+2627                   maxsize=(10000, 10000), 
+2628                   minsize=(0, 0), 
+2629                   error_message='invalid image'): 
+
    2630   
+2631          self.extensions = extensions 
+2632          self.maxsize = maxsize 
+2633          self.minsize = minsize 
+2634          self.error_message = error_message 
+
    2635   
+
    2636 -    def __call__(self, value): 
+
    2637          try: 
+2638              extension = value.filename.rfind('.') 
+2639              assert extension >= 0 
+2640              extension = value.filename[extension + 1:].lower() 
+2641              if extension == 'jpg': 
+2642                  extension = 'jpeg' 
+2643              assert extension in self.extensions 
+2644              if extension == 'bmp': 
+2645                  width, height = self.__bmp(value.file) 
+2646              elif extension == 'gif': 
+2647                  width, height = self.__gif(value.file) 
+2648              elif extension == 'jpeg': 
+2649                  width, height = self.__jpeg(value.file) 
+2650              elif extension == 'png': 
+2651                  width, height = self.__png(value.file) 
+2652              else: 
+2653                  width = -1 
+2654                  height = -1 
+2655              assert self.minsize[0] <= width <= self.maxsize[0] \ 
+2656                  and self.minsize[1] <= height <= self.maxsize[1] 
+2657              value.file.seek(0) 
+2658              return (value, None) 
+2659          except: 
+2660              return (value, translate(self.error_message)) 
+
    2661   
+
    2662 -    def __bmp(self, stream): 
+
    2663          if stream.read(2) == 'BM': 
+2664              stream.read(16) 
+2665              return struct.unpack("<LL", stream.read(8)) 
+2666          return (-1, -1) 
+
    2667   
+
    2668 -    def __gif(self, stream): 
+
    2669          if stream.read(6) in ('GIF87a', 'GIF89a'): 
+2670              stream = stream.read(5) 
+2671              if len(stream) == 5: 
+2672                  return tuple(struct.unpack("<HHB", stream)[:-1]) 
+2673          return (-1, -1) 
+
    2674   
+
    2675 -    def __jpeg(self, stream): 
+
    2676          if stream.read(2) == '\xFF\xD8': 
+2677              while True: 
+2678                  (marker, code, length) = struct.unpack("!BBH", stream.read(4)) 
+2679                  if marker != 0xFF: 
+2680                      break 
+2681                  elif code >= 0xC0 and code <= 0xC3: 
+2682                      return tuple(reversed( 
+2683                          struct.unpack("!xHH", stream.read(5)))) 
+2684                  else: 
+2685                      stream.read(length - 2) 
+2686          return (-1, -1) 
+
    2687   
+
    2688 -    def __png(self, stream): 
+
    2689          if stream.read(8) == '\211PNG\r\n\032\n': 
+2690              stream.read(4) 
+2691              if stream.read(4) == "IHDR": 
+2692                  return struct.unpack("!LL", stream.read(8)) 
+2693          return (-1, -1) 
+
    2694   
+2695   
+
    2696 -class IS_UPLOAD_FILENAME(Validator): 
+
    2697      """ 
+2698      Checks if name and extension of file uploaded through file input matches 
+2699      given criteria. 
+2700   
+2701      Does *not* ensure the file type in any way. Returns validation failure 
+2702      if no data was uploaded. 
+2703   
+2704      Arguments:: 
+2705   
+2706      filename: filename (before dot) regex 
+2707      extension: extension (after dot) regex 
+2708      lastdot: which dot should be used as a filename / extension separator: 
+2709               True means last dot, eg. file.png -> file / png 
+2710               False means first dot, eg. file.tar.gz -> file / tar.gz 
+2711      case: 0 - keep the case, 1 - transform the string into lowercase (default), 
+2712            2 - transform the string into uppercase 
+2713   
+2714      If there is no dot present, extension checks will be done against empty 
+2715      string and filename checks against whole value. 
+2716   
+2717      Examples:: 
+2718   
+2719          #Check if file has a pdf extension (case insensitive): 
+2720          INPUT(_type='file', _name='name', 
+2721              requires=IS_UPLOAD_FILENAME(extension='pdf')) 
+2722   
+2723          #Check if file has a tar.gz extension and name starting with backup: 
+2724          INPUT(_type='file', _name='name', 
+2725              requires=IS_UPLOAD_FILENAME(filename='backup.*', 
+2726                  extension='tar.gz', lastdot=False)) 
+2727   
+2728          #Check if file has no extension and name matching README 
+2729          #(case sensitive): 
+2730          INPUT(_type='file', _name='name', 
+2731              requires=IS_UPLOAD_FILENAME(filename='^README$', 
+2732                  extension='^$', case=0)) 
+2733      """ 
+2734   
+
    2735 -    def __init__(self, filename=None, extension=None, lastdot=True, case=1, 
+2736              error_message='enter valid filename'): 
+
    2737          if isinstance(filename, str): 
+2738              filename = re.compile(filename) 
+2739          if isinstance(extension, str): 
+2740              extension = re.compile(extension) 
+2741          self.filename = filename 
+2742          self.extension = extension 
+2743          self.lastdot = lastdot 
+2744          self.case = case 
+2745          self.error_message = error_message 
+
    2746   
+
    2747 -    def __call__(self, value): 
+
    2748          try: 
+2749              string = value.filename 
+2750          except: 
+2751              return (value, translate(self.error_message)) 
+2752          if self.case == 1: 
+2753              string = string.lower() 
+2754          elif self.case == 2: 
+2755              string = string.upper() 
+2756          if self.lastdot: 
+2757              dot = string.rfind('.') 
+2758          else: 
+2759              dot = string.find('.') 
+2760          if dot == -1: 
+2761              dot = len(string) 
+2762          if self.filename and not self.filename.match(string[:dot]): 
+2763              return (value, translate(self.error_message)) 
+2764          elif self.extension and not self.extension.match(string[dot + 1:]): 
+2765              return (value, translate(self.error_message)) 
+2766          else: 
+2767              return (value, None) 
+
    2768   
+2769   
+
    2770 -class IS_IPV4(Validator): 
+
    2771      """ 
+2772      Checks if field's value is an IP version 4 address in decimal form. Can 
+2773      be set to force addresses from certain range. 
+2774   
+2775      IPv4 regex taken from: http://regexlib.com/REDetails.aspx?regexp_id=1411 
+2776   
+2777      Arguments: 
+2778   
+2779      minip: lowest allowed address; accepts: 
+2780             str, eg. 192.168.0.1 
+2781             list or tuple of octets, eg. [192, 168, 0, 1] 
+2782      maxip: highest allowed address; same as above 
+2783      invert: True to allow addresses only from outside of given range; note 
+2784              that range boundaries are not matched this way 
+2785      is_localhost: localhost address treatment: 
+2786                    None (default): indifferent 
+2787                    True (enforce): query address must match localhost address 
+2788                                    (127.0.0.1) 
+2789                    False (forbid): query address must not match localhost 
+2790                                    address 
+2791      is_private: same as above, except that query address is checked against 
+2792                  two address ranges: 172.16.0.0 - 172.31.255.255 and 
+2793                  192.168.0.0 - 192.168.255.255 
+2794      is_automatic: same as above, except that query address is checked against 
+2795                    one address range: 169.254.0.0 - 169.254.255.255 
+2796   
+2797      Minip and maxip may also be lists or tuples of addresses in all above 
+2798      forms (str, int, list / tuple), allowing setup of multiple address ranges: 
+2799   
+2800          minip = (minip1, minip2, ... minipN) 
+2801                     |       |           | 
+2802                     |       |           | 
+2803          maxip = (maxip1, maxip2, ... maxipN) 
+2804   
+2805      Longer iterable will be truncated to match length of shorter one. 
+2806   
+2807      Examples:: 
+2808   
+2809          #Check for valid IPv4 address: 
+2810          INPUT(_type='text', _name='name', requires=IS_IPV4()) 
+2811   
+2812          #Check for valid IPv4 address belonging to specific range: 
+2813          INPUT(_type='text', _name='name', 
+2814              requires=IS_IPV4(minip='100.200.0.0', maxip='100.200.255.255')) 
+2815   
+2816          #Check for valid IPv4 address belonging to either 100.110.0.0 - 
+2817          #100.110.255.255 or 200.50.0.0 - 200.50.0.255 address range: 
+2818          INPUT(_type='text', _name='name', 
+2819              requires=IS_IPV4(minip=('100.110.0.0', '200.50.0.0'), 
+2820                               maxip=('100.110.255.255', '200.50.0.255'))) 
+2821   
+2822          #Check for valid IPv4 address belonging to private address space: 
+2823          INPUT(_type='text', _name='name', requires=IS_IPV4(is_private=True)) 
+2824   
+2825          #Check for valid IPv4 address that is not a localhost address: 
+2826          INPUT(_type='text', _name='name', requires=IS_IPV4(is_localhost=False)) 
+2827   
+2828      >>> IS_IPV4()('1.2.3.4') 
+2829      ('1.2.3.4', None) 
+2830      >>> IS_IPV4()('255.255.255.255') 
+2831      ('255.255.255.255', None) 
+2832      >>> IS_IPV4()('1.2.3.4 ') 
+2833      ('1.2.3.4 ', 'enter valid IPv4 address') 
+2834      >>> IS_IPV4()('1.2.3.4.5') 
+2835      ('1.2.3.4.5', 'enter valid IPv4 address') 
+2836      >>> IS_IPV4()('123.123') 
+2837      ('123.123', 'enter valid IPv4 address') 
+2838      >>> IS_IPV4()('1111.2.3.4') 
+2839      ('1111.2.3.4', 'enter valid IPv4 address') 
+2840      >>> IS_IPV4()('0111.2.3.4') 
+2841      ('0111.2.3.4', 'enter valid IPv4 address') 
+2842      >>> IS_IPV4()('256.2.3.4') 
+2843      ('256.2.3.4', 'enter valid IPv4 address') 
+2844      >>> IS_IPV4()('300.2.3.4') 
+2845      ('300.2.3.4', 'enter valid IPv4 address') 
+2846      >>> IS_IPV4(minip='1.2.3.4', maxip='1.2.3.4')('1.2.3.4') 
+2847      ('1.2.3.4', None) 
+2848      >>> IS_IPV4(minip='1.2.3.5', maxip='1.2.3.9', error_message='bad ip')('1.2.3.4') 
+2849      ('1.2.3.4', 'bad ip') 
+2850      >>> IS_IPV4(maxip='1.2.3.4', invert=True)('127.0.0.1') 
+2851      ('127.0.0.1', None) 
+2852      >>> IS_IPV4(maxip='1.2.3.4', invert=True)('1.2.3.4') 
+2853      ('1.2.3.4', 'enter valid IPv4 address') 
+2854      >>> IS_IPV4(is_localhost=True)('127.0.0.1') 
+2855      ('127.0.0.1', None) 
+2856      >>> IS_IPV4(is_localhost=True)('1.2.3.4') 
+2857      ('1.2.3.4', 'enter valid IPv4 address') 
+2858      >>> IS_IPV4(is_localhost=False)('127.0.0.1') 
+2859      ('127.0.0.1', 'enter valid IPv4 address') 
+2860      >>> IS_IPV4(maxip='100.0.0.0', is_localhost=True)('127.0.0.1') 
+2861      ('127.0.0.1', 'enter valid IPv4 address') 
+2862      """ 
+2863   
+2864      regex = re.compile( 
+2865          '^(([1-9]?\d|1\d\d|2[0-4]\d|25[0-5])\.){3}([1-9]?\d|1\d\d|2[0-4]\d|25[0-5])$') 
+2866      numbers = (16777216, 65536, 256, 1) 
+2867      localhost = 2130706433 
+2868      private = ((2886729728L, 2886795263L), (3232235520L, 3232301055L)) 
+2869      automatic = (2851995648L, 2852061183L) 
+2870   
+
    2871 -    def __init__( 
+2872          self, 
+2873          minip='0.0.0.0', 
+2874          maxip='255.255.255.255', 
+2875          invert=False, 
+2876          is_localhost=None, 
+2877          is_private=None, 
+2878          is_automatic=None, 
+2879          error_message='enter valid IPv4 address'): 
+
    2880          for n, value in enumerate((minip, maxip)): 
+2881              temp = [] 
+2882              if isinstance(value, str): 
+2883                  temp.append(value.split('.')) 
+2884              elif isinstance(value, (list, tuple)): 
+2885                  if len(value) == len(filter(lambda item: isinstance(item, int), value)) == 4: 
+2886                      temp.append(value) 
+2887                  else: 
+2888                      for item in value: 
+2889                          if isinstance(item, str): 
+2890                              temp.append(item.split('.')) 
+2891                          elif isinstance(item, (list, tuple)): 
+2892                              temp.append(item) 
+2893              numbers = [] 
+2894              for item in temp: 
+2895                  number = 0 
+2896                  for i, j in zip(self.numbers, item): 
+2897                      number += i * int(j) 
+2898                  numbers.append(number) 
+2899              if n == 0: 
+2900                  self.minip = numbers 
+2901              else: 
+2902                  self.maxip = numbers 
+2903          self.invert = invert 
+2904          self.is_localhost = is_localhost 
+2905          self.is_private = is_private 
+2906          self.is_automatic = is_automatic 
+2907          self.error_message = error_message 
+
    2908   
+
    2909 -    def __call__(self, value): 
+
    2910          if self.regex.match(value): 
+2911              number = 0 
+2912              for i, j in zip(self.numbers, value.split('.')): 
+2913                  number += i * int(j) 
+2914              ok = False 
+2915              for bottom, top in zip(self.minip, self.maxip): 
+2916                  if self.invert != (bottom <= number <= top): 
+2917                      ok = True 
+2918              if not (self.is_localhost == None or self.is_localhost == \ 
+2919                  (number == self.localhost)): 
+2920                      ok = False 
+2921              if not (self.is_private == None or self.is_private == \ 
+2922                  (sum([number[0] <= number <= number[1] for number in self.private]) > 0)): 
+2923                      ok = False 
+2924              if not (self.is_automatic == None or self.is_automatic == \ 
+2925                  (self.automatic[0] <= number <= self.automatic[1])): 
+2926                      ok = False 
+2927              if ok: 
+2928                  return (value, None) 
+2929          return (value, translate(self.error_message)) 
+
    2930   
+2931  if __name__ == '__main__': 
+2932      import doctest 
+2933      doctest.testmod() 
+2934   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:03 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.CLEANUP-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.CLEANUP-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.CLEANUP-class.html
@@ -0,0 +1,273 @@
+
+
+
+
+  web2py.gluon.validators.CLEANUP
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class CLEANUP
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class CLEANUP
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            CLEANUP
+
    
+
+
    
+example:
+
    +   INPUT(_type='text', _name='name', requires=CLEANUP())
+
    
+  removes special characters on validation

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        regex='[^\t\n\r -~]')
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        regex='[^\t\n\r -~]')
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.CRYPT-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.CRYPT-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.CRYPT-class.html
@@ -0,0 +1,275 @@
+
+
+
+
+  web2py.gluon.validators.CRYPT
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class CRYPT
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class CRYPT
    source code

    
+
    +object --+
+         |
+        CRYPT
+
    
+
+
    
+example:
+
    +   INPUT(_type='text', _name='name', requires=CRYPT())
+
    
+  
    encodes the value on validation with a digest.
    
+  If no arguments are provided CRYPT uses the MD5 algorithm. If the key 
+  argument is provided the HMAC+MD5 algorithm is used. If the digest_alg is
+  specified this is used to replace the MD5 with, for example, SHA512. The 
+  digest_alg can be the name of a hashlib algorithm as a string or the 
+  algorithm itself.

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        key=1,
+        digest_alg='md5')
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        key=1,
+        digest_alg='md5')
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_ALPHANUMERIC-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_ALPHANUMERIC-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_ALPHANUMERIC-class.html
@@ -0,0 +1,265 @@
+
+
+
+
+  web2py.gluon.validators.IS_ALPHANUMERIC
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_ALPHANUMERIC
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_ALPHANUMERIC
    source code

    
+
    +object --+        
+         |        
+ Validator --+    
+             |    
+      IS_MATCH --+
+                 |
+                IS_ALPHANUMERIC
+
    
+
+
    
+example:
+
    +   INPUT(_type='text', _name='name', requires=IS_ALPHANUMERIC())
+
+   >>> IS_ALPHANUMERIC()('1')
+   ('1', None)
+   >>> IS_ALPHANUMERIC()('')
+   ('', None)
+   >>> IS_ALPHANUMERIC()('A_a')
+   ('A_a', None)
+   >>> IS_ALPHANUMERIC()('!')
+   ('!', 'enter only letters, numbers, and underscore')
+


    
+
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        error_message='enter only letters, numbers, and underscore')
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from IS_MATCH:
+      __call__
+      
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        error_message='enter only letters, numbers, and underscore')
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      IS_MATCH.__init__
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_DATE-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_DATE-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_DATE-class.html
@@ -0,0 +1,321 @@
+
+
+
+
+  web2py.gluon.validators.IS_DATE
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_DATE
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_DATE
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_DATE
+
    
+
+
    Known Subclasses:
    
+
    
+    IS_DATE_IN_RANGE
+
    
+
+
    
+example:
+
    +   INPUT(_type='text', _name='name', requires=IS_DATE())
+
    
+  date has to be in the ISO8960 format YYYY-MM-DD

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        format='%Y-%m-%d',
+        error_message='enter date as %(format)s')
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    formatter(self,
+        value)
    
+      For some validators returns a formatted version (matching the 
+      validator) of value.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        format='%Y-%m-%d',
+        error_message='enter date as %(format)s')
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    formatter(self,
+        value)
+  
    
+      		source code 
+    
    
+  
+  For some validators returns a formatted version (matching the 
+  validator) of value. Otherwise just returns the value.
+  
    
+    
    Overrides:
+      Validator.formatter
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_DATETIME-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_DATETIME-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_DATETIME-class.html
@@ -0,0 +1,380 @@
+
+
+
+
+  web2py.gluon.validators.IS_DATETIME
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_DATETIME
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_DATETIME
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_DATETIME
+
    
+
+
    Known Subclasses:
    
+
    
+    IS_DATETIME_IN_RANGE
+
    
+
+
    
+example:
+
    +   INPUT(_type='text', _name='name', requires=IS_DATETIME())
+
    
+  datetime has to be in the ISO8960 format YYYY-MM-DD hh:mm:ss

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        format='%Y-%m-%d %H:%M:%S',
+        error_message='enter date and time as %(format)s')
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    formatter(self,
+        value)
    
+      For some validators returns a formatted version (matching the 
+      validator) of value.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    nice(format)
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        isodatetime = '%Y-%m-%d %H:%M:%S'
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        format='%Y-%m-%d %H:%M:%S',
+        error_message='enter date and time as %(format)s')
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    formatter(self,
+        value)
+  
    
+      		source code 
+    
    
+  
+  For some validators returns a formatted version (matching the 
+  validator) of value. Otherwise just returns the value.
+  
    
+    
    Overrides:
+      Validator.formatter
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_DATETIME_IN_RANGE-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_DATETIME_IN_RANGE-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_DATETIME_IN_RANGE-class.html
@@ -0,0 +1,364 @@
+
+
+
+
+  web2py.gluon.validators.IS_DATETIME_IN_RANGE
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_DATETIME_IN_RANGE
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_DATETIME_IN_RANGE
    source code

    
+
    +object --+        
+         |        
+ Validator --+    
+             |    
+   IS_DATETIME --+
+                 |
+                IS_DATETIME_IN_RANGE
+
    
+
+
    
+example:
+
    +   >>> v = IS_DATETIME_IN_RANGE(                minimum=datetime.datetime(2008,1,1,12,20),                 maximum=datetime.datetime(2009,12,31,12,20),                 format="%m/%d/%Y %H:%M",error_message="oops")
+   >>> v('03/03/2008 12:40')
+   (datetime.datetime(2008, 3, 3, 12, 40), None)
+
+   >>> v('03/03/2010 10:34')
+   (datetime.datetime(2010, 3, 3, 10, 34), 'oops')
+
+   >>> v(datetime.datetime(2008,3,3,0,0))
+   (datetime.datetime(2008, 3, 3, 0, 0), None)
+
+   >>> v(datetime.datetime(2010,3,3,0,0))
+   (datetime.datetime(2010, 3, 3, 0, 0), 'oops')
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        minimum=1,
+        maximum=1,
+        format='%Y-%m-%d %H:%M:%S',
+        error_message=1)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from IS_DATETIME:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+    
    Inherited from IS_DATETIME:
+      nice
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+    
    Inherited from IS_DATETIME:
+      isodatetime
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        minimum=1,
+        maximum=1,
+        format='%Y-%m-%d %H:%M:%S',
+        error_message=1)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      IS_DATETIME.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __call__(self,
+        value)
+    
    (Call operator)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      IS_DATETIME.__call__
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_DATE_IN_RANGE-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_DATE_IN_RANGE-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_DATE_IN_RANGE-class.html
@@ -0,0 +1,315 @@
+
+
+
+
+  web2py.gluon.validators.IS_DATE_IN_RANGE
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_DATE_IN_RANGE
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_DATE_IN_RANGE
    source code

    
+
    +object --+        
+         |        
+ Validator --+    
+             |    
+       IS_DATE --+
+                 |
+                IS_DATE_IN_RANGE
+
    
+
+
    
+example:
+
    +   >>> v = IS_DATE_IN_RANGE(minimum=datetime.date(2008,1,1),                                  maximum=datetime.date(2009,12,31),                                  format="%m/%d/%Y",error_message="oops")
+
+   >>> v('03/03/2008')
+   (datetime.date(2008, 3, 3), None)
+
+   >>> v('03/03/2010')
+   (datetime.date(2010, 3, 3), 'oops')
+
+   >>> v(datetime.date(2008,3,3))
+   (datetime.date(2008, 3, 3), None)
+
+   >>> v(datetime.date(2010,3,3))
+   (datetime.date(2010, 3, 3), 'oops')
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        minimum=1,
+        maximum=1,
+        format='%Y-%m-%d',
+        error_message=1)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from IS_DATE:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        minimum=1,
+        maximum=1,
+        format='%Y-%m-%d',
+        error_message=1)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      IS_DATE.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __call__(self,
+        value)
+    
    (Call operator)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      IS_DATE.__call__
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_DECIMAL_IN_RANGE-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_DECIMAL_IN_RANGE-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_DECIMAL_IN_RANGE-class.html
@@ -0,0 +1,363 @@
+
+
+
+
+  web2py.gluon.validators.IS_DECIMAL_IN_RANGE
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_DECIMAL_IN_RANGE
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_DECIMAL_IN_RANGE
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_DECIMAL_IN_RANGE
+
    
+
+
    
+
    Determine that the argument is (or can be represented as) a Python 
+  Decimal, and that it falls within the specified inclusive range. The 
+  comparison is made with Python Decimal arithmetic.
    
+  
    The minimum and maximum limits can be None, meaning no lower or upper 
+  limit, respectively.
    
+  example:
+
    +   INPUT(_type='text', _name='name', requires=IS_DECIMAL_IN_RANGE(0, 10))
+
+   >>> IS_DECIMAL_IN_RANGE(1,5)('4')
+   (Decimal('4'), None)
+   >>> IS_DECIMAL_IN_RANGE(1,5)(4)
+   (Decimal('4'), None)
+   >>> IS_DECIMAL_IN_RANGE(1,5)(1)
+   (Decimal('1'), None)
+   >>> IS_DECIMAL_IN_RANGE(1,5)(5.25)
+   (5.25, 'enter a number between 1 and 5')
+   >>> IS_DECIMAL_IN_RANGE(5.25,6)(5.25)
+   (Decimal('5.25'), None)
+   >>> IS_DECIMAL_IN_RANGE(5.25,6)('5.25')
+   (Decimal('5.25'), None)
+   >>> IS_DECIMAL_IN_RANGE(1,5)(6.0)
+   (6.0, 'enter a number between 1 and 5')
+   >>> IS_DECIMAL_IN_RANGE(1,5)(3.5)
+   (Decimal('3.5'), None)
+   >>> IS_DECIMAL_IN_RANGE(1.5,5.5)(3.5)
+   (Decimal('3.5'), None)
+   >>> IS_DECIMAL_IN_RANGE(1.5,5.5)(6.5)
+   (6.5, 'enter a number between 1.5 and 5.5')
+   >>> IS_DECIMAL_IN_RANGE(1.5,None)(6.5)
+   (Decimal('6.5'), None)
+   >>> IS_DECIMAL_IN_RANGE(1.5,None)(0.5)
+   (0.5, 'enter a number greater than or equal to 1.5')
+   >>> IS_DECIMAL_IN_RANGE(None,5.5)(4.5)
+   (Decimal('4.5'), None)
+   >>> IS_DECIMAL_IN_RANGE(None,5.5)(6.5)
+   (6.5, 'enter a number less than or equal to 5.5')
+   >>> IS_DECIMAL_IN_RANGE()(6.5)
+   (Decimal('6.5'), None)
+   >>> IS_DECIMAL_IN_RANGE(0,99)(123.123)
+   (123.123, 'enter a number between 0 and 99')
+   >>> IS_DECIMAL_IN_RANGE(0,99)('123.123')
+   ('123.123', 'enter a number between 0 and 99')
+   >>> IS_DECIMAL_IN_RANGE(0,99)('12.34')
+   (Decimal('12.34'), None)
+   >>> IS_DECIMAL_IN_RANGE()('abc')
+   ('abc', 'enter a decimal number')
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        minimum=1,
+        maximum=1,
+        error_message=1,
+        dot='.')
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    formatter(self,
+        value)
    
+      For some validators returns a formatted version (matching the 
+      validator) of value.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        minimum=1,
+        maximum=1,
+        error_message=1,
+        dot='.')
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    formatter(self,
+        value)
+  
    
+      		source code 
+    
    
+  
+  For some validators returns a formatted version (matching the 
+  validator) of value. Otherwise just returns the value.
+  
    
+    
    Overrides:
+      Validator.formatter
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_EMAIL-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_EMAIL-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_EMAIL-class.html
@@ -0,0 +1,452 @@
+
+
+
+
+  web2py.gluon.validators.IS_EMAIL
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_EMAIL
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_EMAIL
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_EMAIL
+
    
+
+
    
+
    +
+Checks if field's value is a valid email address. Can be set to disallow
+or force addresses from certain domain(s).
+
+Email regex adapted from
+http://haacked.com/archive/2007/08/21/i-knew-how-to-validate-an-email-address-until-i.aspx,
+generally following the RFCs, except that we disallow quoted strings
+and permit underscores and leading numerics in subdomain labels
+
+Arguments:
+
+- banned: regex text for disallowed address domains
+- forced: regex text for required address domains
+
+Both arguments can also be custom objects with a match(value) method.
+
+Examples::
+
+    #Check for valid email address:
+    INPUT(_type='text', _name='name',
+        requires=IS_EMAIL())
+
+    #Check for valid email address that can't be from a .com domain:
+    INPUT(_type='text', _name='name',
+        requires=IS_EMAIL(banned='^.*\.com(|\..*)$'))
+
+    #Check for valid email address that must be from a .edu domain:
+    INPUT(_type='text', _name='name',
+        requires=IS_EMAIL(forced='^.*\.edu(|\..*)$'))
+
+    >>> IS_EMAIL()('a@b.com')
+    ('a@b.com', None)
+    >>> IS_EMAIL()('abc@def.com')
+    ('abc@def.com', None)
+    >>> IS_EMAIL()('abc@3def.com')
+    ('abc@3def.com', None)
+    >>> IS_EMAIL()('abc@def.us')
+    ('abc@def.us', None)
+    >>> IS_EMAIL()('abc@d_-f.us')
+    ('abc@d_-f.us', None)
+    >>> IS_EMAIL()('@def.com')           # missing name
+    ('@def.com', 'enter a valid email address')
+    >>> IS_EMAIL()('"abc@def".com')      # quoted name
+    ('"abc@def".com', 'enter a valid email address')
+    >>> IS_EMAIL()('abc+def.com')        # no @
+    ('abc+def.com', 'enter a valid email address')
+    >>> IS_EMAIL()('abc@def.x')          # one-char TLD
+    ('abc@def.x', 'enter a valid email address')
+    >>> IS_EMAIL()('abc@def.12')         # numeric TLD
+    ('abc@def.12', 'enter a valid email address')
+    >>> IS_EMAIL()('abc@def..com')       # double-dot in domain
+    ('abc@def..com', 'enter a valid email address')
+    >>> IS_EMAIL()('abc@.def.com')       # dot starts domain
+    ('abc@.def.com', 'enter a valid email address')
+    >>> IS_EMAIL()('abc@def.c_m')        # underscore in TLD
+    ('abc@def.c_m', 'enter a valid email address')
+    >>> IS_EMAIL()('NotAnEmail')         # missing @
+    ('NotAnEmail', 'enter a valid email address')
+    >>> IS_EMAIL()('abc@NotAnEmail')     # missing TLD
+    ('abc@NotAnEmail', 'enter a valid email address')
+    >>> IS_EMAIL()('customer/department@example.com')
+    ('customer/department@example.com', None)
+    >>> IS_EMAIL()('$A12345@example.com')
+    ('$A12345@example.com', None)
+    >>> IS_EMAIL()('!def!xyz%abc@example.com')
+    ('!def!xyz%abc@example.com', None)
+    >>> IS_EMAIL()('_Yosemite.Sam@example.com')
+    ('_Yosemite.Sam@example.com', None)
+    >>> IS_EMAIL()('~@example.com')
+    ('~@example.com', None)
+    >>> IS_EMAIL()('.wooly@example.com')       # dot starts name
+    ('.wooly@example.com', 'enter a valid email address')
+    >>> IS_EMAIL()('wo..oly@example.com')      # adjacent dots in name
+    ('wo..oly@example.com', 'enter a valid email address')
+    >>> IS_EMAIL()('pootietang.@example.com')  # dot ends name
+    ('pootietang.@example.com', 'enter a valid email address')
+    >>> IS_EMAIL()('.@example.com')            # name is bare dot
+    ('.@example.com', 'enter a valid email address')
+    >>> IS_EMAIL()('Ima.Fool@example.com')
+    ('Ima.Fool@example.com', None)
+    >>> IS_EMAIL()('Ima Fool@example.com')     # space in name
+    ('Ima Fool@example.com', 'enter a valid email address')
+    >>> IS_EMAIL()('localguy@localhost')       # localhost as domain
+    ('localguy@localhost', None)
+
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        banned=1,
+        forced=1,
+        error_message='enter a valid email address')
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        regex = re.compile(r'(?ix)^(?!\.)([-a-z0-9!#\$%&\'\*\+/=\?\^_`...
+    
    
+       
+    
+        regex_proposed_but_failed = re.compile(r'(?ix)^([\w!#\$%&\'\*\...
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        banned=1,
+        forced=1,
+        error_message='enter a valid email address')
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    regex
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +re.compile(r'(?ix)^(?!\.)([-a-z0-9!#\$%&\'\*\+/=\?\^_`\{\|\}~]|(?<!\.)\
+\.)+(?<!\.)@(localhost|([a-z0-9]([-\w]*[a-z0-9])?\.)+[a-z]{2,})$')
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    regex_proposed_but_failed
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +re.compile(r'(?ix)^([\w!#\$%&\'\*\+-/=\?\^`\{\|\}~]+\.)*[\w!#\$%&\'\*\\
++-/=\?\^`\{\|\}~]+@((((([a-z0-9]{1}[a-z0-9-]{,62}[a-z0-9]{1})|[a-z])\.\
+)+[a-z]{2,6})|(\d{1,3}\.){3}\d{1,3}(:\d{1,5})?)$')
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_EMPTY_OR-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_EMPTY_OR-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_EMPTY_OR-class.html
@@ -0,0 +1,360 @@
+
+
+
+
+  web2py.gluon.validators.IS_EMPTY_OR
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_EMPTY_OR
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_EMPTY_OR
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_EMPTY_OR
+
    
+
+
    
+dummy class for testing IS_EMPTY_OR
+
    +>>> IS_EMPTY_OR(IS_EMAIL())('abc@def.com')
+('abc@def.com', None)
+>>> IS_EMPTY_OR(IS_EMAIL())('   ')
+(None, None)
+>>> IS_EMPTY_OR(IS_EMAIL(), null='abc')('   ')
+('abc', None)
+>>> IS_EMPTY_OR(IS_EMAIL(), null='abc', empty_regex='def')('def')
+('abc', None)
+>>> IS_EMPTY_OR(IS_EMAIL())('abc')
+('abc', 'enter a valid email address')
+>>> IS_EMPTY_OR(IS_EMAIL())(' abc ')
+('abc', 'enter a valid email address')


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        other,
+        null=1,
+        empty_regex=1)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    _options(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    set_self_id(self,
+        id)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    formatter(self,
+        value)
    
+      For some validators returns a formatted version (matching the 
+      validator) of value.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        other,
+        null=1,
+        empty_regex=1)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    formatter(self,
+        value)
+  
    
+      		source code 
+    
    
+  
+  For some validators returns a formatted version (matching the 
+  validator) of value. Otherwise just returns the value.
+  
    
+    
    Overrides:
+      Validator.formatter
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_EQUAL_TO-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_EQUAL_TO-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_EQUAL_TO-class.html
@@ -0,0 +1,283 @@
+
+
+
+
+  web2py.gluon.validators.IS_EQUAL_TO
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_EQUAL_TO
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_EQUAL_TO
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_EQUAL_TO
+
    
+
+
    
+example:
+
    +   INPUT(_type='text', _name='password')
+   INPUT(_type='text', _name='password2',
+         requires=IS_EQUAL_TO(request.vars.password))
+
    
+  the argument of IS_EQUAL_TO is a string
+
    +>>> IS_EQUAL_TO('aaa')('aaa')
+('aaa', None)
    
+
    +>>> IS_EQUAL_TO('aaa')('aab')
+('aab', 'no match')


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        expression,
+        error_message='no match')
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        expression,
+        error_message='no match')
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_EXPR-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_EXPR-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_EXPR-class.html
@@ -0,0 +1,283 @@
+
+
+
+
+  web2py.gluon.validators.IS_EXPR
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_EXPR
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_EXPR
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_EXPR
+
    
+
+
    
+example:
+
    +   INPUT(_type='text', _name='name',
+       requires=IS_EXPR('5 < int(value) < 10'))
+
    
+  the argument of IS_EXPR must be python condition:
+
    +   >>> IS_EXPR('int(value) < 2')('1')
+   ('1', None)
+
+   >>> IS_EXPR('int(value) < 2')('2')
+   ('2', 'invalid expression')
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        expression,
+        error_message='invalid expression')
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        expression,
+        error_message='invalid expression')
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_FLOAT_IN_RANGE-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_FLOAT_IN_RANGE-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_FLOAT_IN_RANGE-class.html
@@ -0,0 +1,349 @@
+
+
+
+
+  web2py.gluon.validators.IS_FLOAT_IN_RANGE
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_FLOAT_IN_RANGE
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_FLOAT_IN_RANGE
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_FLOAT_IN_RANGE
+
    
+
+
    
+
    Determine that the argument is (or can be represented as) a float, and
+  that it falls within the specified inclusive range. The comparison is 
+  made with native arithmetic.
    
+  
    The minimum and maximum limits can be None, meaning no lower or upper 
+  limit, respectively.
    
+  example:
+
    +   INPUT(_type='text', _name='name', requires=IS_FLOAT_IN_RANGE(0, 10))
+
+   >>> IS_FLOAT_IN_RANGE(1,5)('4')
+   (4.0, None)
+   >>> IS_FLOAT_IN_RANGE(1,5)(4)
+   (4.0, None)
+   >>> IS_FLOAT_IN_RANGE(1,5)(1)
+   (1.0, None)
+   >>> IS_FLOAT_IN_RANGE(1,5)(5.25)
+   (5.25, 'enter a number between 1 and 5')
+   >>> IS_FLOAT_IN_RANGE(1,5)(6.0)
+   (6.0, 'enter a number between 1 and 5')
+   >>> IS_FLOAT_IN_RANGE(1,5)(3.5)
+   (3.5, None)
+   >>> IS_FLOAT_IN_RANGE(1,None)(3.5)
+   (3.5, None)
+   >>> IS_FLOAT_IN_RANGE(None,5)(3.5)
+   (3.5, None)
+   >>> IS_FLOAT_IN_RANGE(1,None)(0.5)
+   (0.5, 'enter a number greater than or equal to 1')
+   >>> IS_FLOAT_IN_RANGE(None,5)(6.5)
+   (6.5, 'enter a number less than or equal to 5')
+   >>> IS_FLOAT_IN_RANGE()(6.5)
+   (6.5, None)
+   >>> IS_FLOAT_IN_RANGE()('abc')
+   ('abc', 'enter a number')
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        minimum=1,
+        maximum=1,
+        error_message=1,
+        dot='.')
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    formatter(self,
+        value)
    
+      For some validators returns a formatted version (matching the 
+      validator) of value.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        minimum=1,
+        maximum=1,
+        error_message=1,
+        dot='.')
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    formatter(self,
+        value)
+  
    
+      		source code 
+    
    
+  
+  For some validators returns a formatted version (matching the 
+  validator) of value. Otherwise just returns the value.
+  
    
+    
    Overrides:
+      Validator.formatter
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_GENERIC_URL-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_GENERIC_URL-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_GENERIC_URL-class.html
@@ -0,0 +1,340 @@
+
+
+
+
+  web2py.gluon.validators.IS_GENERIC_URL
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_GENERIC_URL
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_GENERIC_URL
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_GENERIC_URL
+
    
+
+
    
+
    +
+Rejects a URL string if any of the following is true:
+   * The string is empty or None
+   * The string uses characters that are not allowed in a URL
+   * The URL scheme specified (if one is specified) is not valid
+
+Based on RFC 2396: http://www.faqs.org/rfcs/rfc2396.html
+
+This function only checks the URL's syntax. It does not check that the URL
+points to a real document, for example, or that it otherwise makes sense
+semantically. This function does automatically prepend 'http://' in front
+of a URL if and only if that's necessary to successfully parse the URL.
+Please note that a scheme will be prepended only for rare cases
+(e.g. 'google.ca:80')
+
+The list of allowed schemes is customizable with the allowed_schemes
+parameter. If you exclude None from the list, then abbreviated URLs
+(lacking a scheme such as 'http') will be rejected.
+
+The default prepended scheme is customizable with the prepend_scheme
+parameter. If you set prepend_scheme to None then prepending will be
+disabled. URLs that require prepending to parse will still be accepted,
+but the return value will not be modified.
+
+@author: Jonathan Benn
+
+>>> IS_GENERIC_URL()('http://user@abc.com')
+('http://user@abc.com', None)
+
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        error_message='enter a valid URL',
+        allowed_schemes=1,
+        prepend_scheme=1)
    
+      :param error_message: a string, the error message to give the end user
+    if the URL does not validate
+:param allowed_schemes: a list containing strings or None.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
    
+      :param value: a string, the URL to validate...    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        error_message='enter a valid URL',
+        allowed_schemes=1,
+        prepend_scheme=1)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
    +
+:param error_message: a string, the error message to give the end user
+    if the URL does not validate
+:param allowed_schemes: a list containing strings or None. Each element
+    is a scheme the inputed URL is allowed to use
+:param prepend_scheme: a string, this scheme is prepended if it's
+    necessary to make the URL valid
+
+
    
+  
    
+    
    Overrides:
+      object.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __call__(self,
+        value)
+    
    (Call operator)
+  
    
+      		source code 
+    
    
+  
+  
    +
+:param value: a string, the URL to validate
+:returns: a tuple, where tuple[0] is the inputed value (possible
+    prepended with prepend_scheme), and tuple[1] is either
+    None (success!) or the string error_message
+
+
    
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_HTTP_URL-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_HTTP_URL-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_HTTP_URL-class.html
@@ -0,0 +1,352 @@
+
+
+
+
+  web2py.gluon.validators.IS_HTTP_URL
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_HTTP_URL
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_HTTP_URL
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_HTTP_URL
+
    
+
+
    
+
    +
+Rejects a URL string if any of the following is true:
+   * The string is empty or None
+   * The string uses characters that are not allowed in a URL
+   * The string breaks any of the HTTP syntactic rules
+   * The URL scheme specified (if one is specified) is not 'http' or 'https'
+   * The top-level domain (if a host name is specified) does not exist
+
+Based on RFC 2616: http://www.faqs.org/rfcs/rfc2616.html
+
+This function only checks the URL's syntax. It does not check that the URL
+points to a real document, for example, or that it otherwise makes sense
+semantically. This function does automatically prepend 'http://' in front
+of a URL in the case of an abbreviated URL (e.g. 'google.ca').
+
+The list of allowed schemes is customizable with the allowed_schemes
+parameter. If you exclude None from the list, then abbreviated URLs
+(lacking a scheme such as 'http') will be rejected.
+
+The default prepended scheme is customizable with the prepend_scheme
+parameter. If you set prepend_scheme to None then prepending will be
+disabled. URLs that require prepending to parse will still be accepted,
+but the return value will not be modified.
+
+@author: Jonathan Benn
+
+>>> IS_HTTP_URL()('http://1.2.3.4')
+('http://1.2.3.4', None)
+>>> IS_HTTP_URL()('http://abc.com')
+('http://abc.com', None)
+>>> IS_HTTP_URL()('https://abc.com')
+('https://abc.com', None)
+>>> IS_HTTP_URL()('httpx://abc.com')
+('httpx://abc.com', 'enter a valid URL')
+>>> IS_HTTP_URL()('http://abc.com:80')
+('http://abc.com:80', None)
+>>> IS_HTTP_URL()('http://user@abc.com')
+('http://user@abc.com', None)
+>>> IS_HTTP_URL()('http://user@1.2.3.4')
+('http://user@1.2.3.4', None)
+
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        error_message='enter a valid URL',
+        allowed_schemes=1,
+        prepend_scheme='http')
    
+      :param error_message: a string, the error message to give the end user
+    if the URL does not validate
+:param allowed_schemes: a list containing strings or None.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
    
+      :param value: a string, the URL to validate...    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        error_message='enter a valid URL',
+        allowed_schemes=1,
+        prepend_scheme='http')
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
    +
+:param error_message: a string, the error message to give the end user
+    if the URL does not validate
+:param allowed_schemes: a list containing strings or None. Each element
+    is a scheme the inputed URL is allowed to use
+:param prepend_scheme: a string, this scheme is prepended if it's
+    necessary to make the URL valid
+
+
    
+  
    
+    
    Overrides:
+      object.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __call__(self,
+        value)
+    
    (Call operator)
+  
    
+      		source code 
+    
    
+  
+  
    +
+:param value: a string, the URL to validate
+:returns: a tuple, where tuple[0] is the inputed value
+    (possible prepended with prepend_scheme), and tuple[1] is either
+    None (success!) or the string error_message
+
+
    
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_IMAGE-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_IMAGE-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_IMAGE-class.html
@@ -0,0 +1,369 @@
+
+
+
+
+  web2py.gluon.validators.IS_IMAGE
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_IMAGE
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_IMAGE
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_IMAGE
+
    
+
+
    
+
    Checks if file uploaded through file input was saved in one of 
+  selected image formats and has dimensions (width and height) within given
+  boundaries.
    
+  
    Does *not* check for maximum file size (use IS_LENGTH for that). 
+  Returns validation failure if no data was uploaded.
    
+  
    Supported file formats: BMP, GIF, JPEG, PNG.
    
+  
    Code parts taken from 
+  http://mail.python.org/pipermail/python-list/2007-June/617126.html
    
+  
    Arguments:
    
+  
    extensions: iterable containing allowed *lowercase* image file 
+  extensions ('jpg' extension of uploaded file counts as 'jpeg') maxsize: 
+  iterable containing maximum width and height of the image minsize: 
+  iterable containing minimum width and height of the image
    
+  
    Use (-1, -1) as minsize to pass image size check.
    
+  Examples:
+
    +   #Check if uploaded file is in any of supported image formats:
+   INPUT(_type='file', _name='name', requires=IS_IMAGE())
+
+   #Check if uploaded file is either JPEG or PNG:
+   INPUT(_type='file', _name='name',
+       requires=IS_IMAGE(extensions=('jpeg', 'png')))
+
+   #Check if uploaded file is PNG with maximum size of 200x200 pixels:
+   INPUT(_type='file', _name='name',
+       requires=IS_IMAGE(extensions=('png'), maxsize=(200, 200)))
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        extensions=('bmp', 'gif', 'jpeg', 'png'),
+        maxsize=(10000, 10000),
+        minsize=(0, 0),
+        error_message='invalid image')
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __bmp(self,
+        stream)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __gif(self,
+        stream)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __jpeg(self,
+        stream)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __png(self,
+        stream)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        extensions=('bmp', 'gif', 'jpeg', 'png'),
+        maxsize=(10000, 10000),
+        minsize=(0, 0),
+        error_message='invalid image')
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_INT_IN_RANGE-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_INT_IN_RANGE-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_INT_IN_RANGE-class.html
@@ -0,0 +1,306 @@
+
+
+
+
+  web2py.gluon.validators.IS_INT_IN_RANGE
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_INT_IN_RANGE
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_INT_IN_RANGE
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_INT_IN_RANGE
+
    
+
+
    
+
    Determine that the argument is (or can be represented as) an int, and 
+  that it falls within the specified range. The range is interpreted in the
+  Pythonic way, so the test is: min <= value < max.
    
+  
    The minimum and maximum limits can be None, meaning no lower or upper 
+  limit, respectively.
    
+  example:
+
    +   INPUT(_type='text', _name='name', requires=IS_INT_IN_RANGE(0, 10))
+
+   >>> IS_INT_IN_RANGE(1,5)('4')
+   (4, None)
+   >>> IS_INT_IN_RANGE(1,5)(4)
+   (4, None)
+   >>> IS_INT_IN_RANGE(1,5)(1)
+   (1, None)
+   >>> IS_INT_IN_RANGE(1,5)(5)
+   (5, 'enter an integer between 1 and 4')
+   >>> IS_INT_IN_RANGE(1,5)(5)
+   (5, 'enter an integer between 1 and 4')
+   >>> IS_INT_IN_RANGE(1,5)(3.5)
+   (3, 'enter an integer between 1 and 4')
+   >>> IS_INT_IN_RANGE(None,5)('4')
+   (4, None)
+   >>> IS_INT_IN_RANGE(None,5)('6')
+   (6, 'enter an integer less than or equal to 4')
+   >>> IS_INT_IN_RANGE(1,None)('4')
+   (4, None)
+   >>> IS_INT_IN_RANGE(1,None)('0')
+   (0, 'enter an integer greater than or equal to 1')
+   >>> IS_INT_IN_RANGE()(6)
+   (6, None)
+   >>> IS_INT_IN_RANGE()('abc')
+   ('abc', 'enter an integer')
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        minimum=1,
+        maximum=1,
+        error_message=1)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        minimum=1,
+        maximum=1,
+        error_message=1)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_IN_DB-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_IN_DB-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_IN_DB-class.html
@@ -0,0 +1,344 @@
+
+
+
+
+  web2py.gluon.validators.IS_IN_DB
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_IN_DB
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_IN_DB
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_IN_DB
+
    
+
+
    
+example:
+
    +   INPUT(_type='text', _name='name',
+         requires=IS_IN_DB(db, db.mytable.myfield, zero=''))
+
    
+  used for reference fields, rendered as a dropbox

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        dbset,
+        field,
+        label=1,
+        error_message='value not in database',
+        orderby=1,
+        groupby=1,
+        cache=1,
+        multiple=True,
+        zero='',
+        sort=True,
+        _and=1)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    set_self_id(self,
+        id)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    build_set(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    options(self,
+        zero=True)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        dbset,
+        field,
+        label=1,
+        error_message='value not in database',
+        orderby=1,
+        groupby=1,
+        cache=1,
+        multiple=True,
+        zero='',
+        sort=True,
+        _and=1)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_IN_SET-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_IN_SET-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_IN_SET-class.html
@@ -0,0 +1,324 @@
+
+
+
+
+  web2py.gluon.validators.IS_IN_SET
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_IN_SET
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_IN_SET
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_IN_SET
+
    
+
+
    Known Subclasses:
    
+
    
+    IS_IN_SUBSET
+
    
+
+
    
+example:
+
    +   INPUT(_type='text', _name='name',
+         requires=IS_IN_SET(['max', 'john'],zero=''))
+
    
+  the argument of IS_IN_SET must be a list or set
+
    +>>> IS_IN_SET(['max', 'john'])('max')
+('max', None)
+>>> IS_IN_SET(['max', 'john'])('massimo')
+('massimo', 'value not allowed')
+>>> IS_IN_SET(['max', 'john'], multiple=True)(('max', 'john'))
+(('max', 'john'), None)
+>>> IS_IN_SET(['max', 'john'], multiple=True)(('bill', 'john'))
+(('bill', 'john'), 'value not allowed')
+>>> IS_IN_SET(('id1','id2'), ['first label','second label'])('id1') # Traditional way
+('id1', None)
+>>> IS_IN_SET({'id1':'first label', 'id2':'second label'})('id1')
+('id1', None)
+>>> import itertools
+>>> IS_IN_SET(itertools.chain(['1','3','5'],['2','4','6']))('1')
+('1', None)
+>>> IS_IN_SET([('id1','first label'), ('id2','second label')])('id1') # Redundant way
+('id1', None)


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        theset,
+        labels=1,
+        error_message='value not allowed',
+        multiple=True,
+        zero='',
+        sort=True)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    options(self,
+        zero=True)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        theset,
+        labels=1,
+        error_message='value not allowed',
+        multiple=True,
+        zero='',
+        sort=True)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_IN_SUBSET-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_IN_SUBSET-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_IN_SUBSET-class.html
@@ -0,0 +1,297 @@
+
+
+
+
+  web2py.gluon.validators.IS_IN_SUBSET
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_IN_SUBSET
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_IN_SUBSET
    source code

    
+
    +object --+        
+         |        
+ Validator --+    
+             |    
+     IS_IN_SET --+
+                 |
+                IS_IN_SUBSET
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        *a,
+        **b)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from IS_IN_SET:
+      options
+      
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        *a,
+        **b)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      IS_IN_SET.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __call__(self,
+        value)
+    
    (Call operator)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      IS_IN_SET.__call__
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_IPV4-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_IPV4-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_IPV4-class.html
@@ -0,0 +1,466 @@
+
+
+
+
+  web2py.gluon.validators.IS_IPV4
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_IPV4
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_IPV4
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_IPV4
+
    
+
+
    
+
    +
+Checks if field's value is an IP version 4 address in decimal form. Can
+be set to force addresses from certain range.
+
+IPv4 regex taken from: http://regexlib.com/REDetails.aspx?regexp_id=1411
+
+Arguments:
+
+minip: lowest allowed address; accepts:
+       str, eg. 192.168.0.1
+       list or tuple of octets, eg. [192, 168, 0, 1]
+maxip: highest allowed address; same as above
+invert: True to allow addresses only from outside of given range; note
+        that range boundaries are not matched this way
+is_localhost: localhost address treatment:
+              None (default): indifferent
+              True (enforce): query address must match localhost address
+                              (127.0.0.1)
+              False (forbid): query address must not match localhost
+                              address
+is_private: same as above, except that query address is checked against
+            two address ranges: 172.16.0.0 - 172.31.255.255 and
+            192.168.0.0 - 192.168.255.255
+is_automatic: same as above, except that query address is checked against
+              one address range: 169.254.0.0 - 169.254.255.255
+
+Minip and maxip may also be lists or tuples of addresses in all above
+forms (str, int, list / tuple), allowing setup of multiple address ranges:
+
+    minip = (minip1, minip2, ... minipN)
+               |       |           |
+               |       |           |
+    maxip = (maxip1, maxip2, ... maxipN)
+
+Longer iterable will be truncated to match length of shorter one.
+
+Examples::
+
+    #Check for valid IPv4 address:
+    INPUT(_type='text', _name='name', requires=IS_IPV4())
+
+    #Check for valid IPv4 address belonging to specific range:
+    INPUT(_type='text', _name='name',
+        requires=IS_IPV4(minip='100.200.0.0', maxip='100.200.255.255'))
+
+    #Check for valid IPv4 address belonging to either 100.110.0.0 -
+    #100.110.255.255 or 200.50.0.0 - 200.50.0.255 address range:
+    INPUT(_type='text', _name='name',
+        requires=IS_IPV4(minip=('100.110.0.0', '200.50.0.0'),
+                         maxip=('100.110.255.255', '200.50.0.255')))
+
+    #Check for valid IPv4 address belonging to private address space:
+    INPUT(_type='text', _name='name', requires=IS_IPV4(is_private=True))
+
+    #Check for valid IPv4 address that is not a localhost address:
+    INPUT(_type='text', _name='name', requires=IS_IPV4(is_localhost=False))
+
+>>> IS_IPV4()('1.2.3.4')
+('1.2.3.4', None)
+>>> IS_IPV4()('255.255.255.255')
+('255.255.255.255', None)
+>>> IS_IPV4()('1.2.3.4 ')
+('1.2.3.4 ', 'enter valid IPv4 address')
+>>> IS_IPV4()('1.2.3.4.5')
+('1.2.3.4.5', 'enter valid IPv4 address')
+>>> IS_IPV4()('123.123')
+('123.123', 'enter valid IPv4 address')
+>>> IS_IPV4()('1111.2.3.4')
+('1111.2.3.4', 'enter valid IPv4 address')
+>>> IS_IPV4()('0111.2.3.4')
+('0111.2.3.4', 'enter valid IPv4 address')
+>>> IS_IPV4()('256.2.3.4')
+('256.2.3.4', 'enter valid IPv4 address')
+>>> IS_IPV4()('300.2.3.4')
+('300.2.3.4', 'enter valid IPv4 address')
+>>> IS_IPV4(minip='1.2.3.4', maxip='1.2.3.4')('1.2.3.4')
+('1.2.3.4', None)
+>>> IS_IPV4(minip='1.2.3.5', maxip='1.2.3.9', error_message='bad ip')('1.2.3.4')
+('1.2.3.4', 'bad ip')
+>>> IS_IPV4(maxip='1.2.3.4', invert=True)('127.0.0.1')
+('127.0.0.1', None)
+>>> IS_IPV4(maxip='1.2.3.4', invert=True)('1.2.3.4')
+('1.2.3.4', 'enter valid IPv4 address')
+>>> IS_IPV4(is_localhost=True)('127.0.0.1')
+('127.0.0.1', None)
+>>> IS_IPV4(is_localhost=True)('1.2.3.4')
+('1.2.3.4', 'enter valid IPv4 address')
+>>> IS_IPV4(is_localhost=False)('127.0.0.1')
+('127.0.0.1', 'enter valid IPv4 address')
+>>> IS_IPV4(maxip='100.0.0.0', is_localhost=True)('127.0.0.1')
+('127.0.0.1', 'enter valid IPv4 address')
+
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        minip='0.0.0.0',
+        maxip='255.255.255.255',
+        invert=True,
+        is_localhost=1,
+        is_private=1,
+        is_automatic=1,
+        error_message='enter valid IPv4 address')
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        regex = re.compile(r'^(([1-9]?\d|1\d\d|2[0-4]\d|25[0-5])\.){3}...
+    
    
+       
+    
+        numbers = (16777216, 65536, 256, 1)
+    
    
+       
+    
+        localhost = 2130706433
+    
    
+       
+    
+        private = ((2886729728, 2886795263), (3232235520, 3232301055))
+    
    
+       
+    
+        automatic = (2851995648, 2852061183)
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        minip='0.0.0.0',
+        maxip='255.255.255.255',
+        invert=True,
+        is_localhost=1,
+        is_private=1,
+        is_automatic=1,
+        error_message='enter valid IPv4 address')
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Class Variable Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    regex
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +re.compile(r'^(([1-9]?\d|1\d\d|2[0-4]\d|25[0-5])\.){3}([1-9]?\d|1\d\d|\
+2[0-4]\d|25[0-5])$')
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_LENGTH-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_LENGTH-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_LENGTH-class.html
@@ -0,0 +1,297 @@
+
+
+
+
+  web2py.gluon.validators.IS_LENGTH
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_LENGTH
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_LENGTH
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_LENGTH
+
    
+
+
    
+
    Checks if length of field's value fits between given boundaries. Works
+  for both text and file inputs.
    
+  
    Arguments:
    
+  
    maxsize: maximum allowed length / size minsize: minimum allowed length
+  / size
    
+  Examples:
+
    +   #Check if text string is shorter than 33 characters:
+   INPUT(_type='text', _name='name', requires=IS_LENGTH(32))
+
+   #Check if password string is longer than 5 characters:
+   INPUT(_type='password', _name='name', requires=IS_LENGTH(minsize=6))
+
+   #Check if uploaded file has size between 1KB and 1MB:
+   INPUT(_type='file', _name='name', requires=IS_LENGTH(1048576, 1024))
+
+   >>> IS_LENGTH()('')
+   ('', None)
+   >>> IS_LENGTH()('1234567890')
+   ('1234567890', None)
+   >>> IS_LENGTH(maxsize=5, minsize=0)('1234567890')  # too long
+   ('1234567890', 'enter from 0 to 5 characters')
+   >>> IS_LENGTH(maxsize=50, minsize=20)('1234567890')  # too short
+   ('1234567890', 'enter from 20 to 50 characters')
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        maxsize=255,
+        minsize=0,
+        error_message='enter from %(min)g to %(max)g characters')
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        maxsize=255,
+        minsize=0,
+        error_message='enter from %(min)g to %(max)g characters')
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_LIST_OF-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_LIST_OF-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_LIST_OF-class.html
@@ -0,0 +1,267 @@
+
+
+
+
+  web2py.gluon.validators.IS_LIST_OF
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_LIST_OF
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_LIST_OF
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_LIST_OF
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        other)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        other)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_LOWER-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_LOWER-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_LOWER-class.html
@@ -0,0 +1,211 @@
+
+
+
+
+  web2py.gluon.validators.IS_LOWER
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_LOWER
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_LOWER
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_LOWER
+
    
+
+
    
+convert to lower case
+
    +>>> IS_LOWER()('ABC')
+('abc', None)
+>>> IS_LOWER()('Ñ')
+('\xc3\xb1', None)


    
+
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_MATCH-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_MATCH-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_MATCH-class.html
@@ -0,0 +1,289 @@
+
+
+
+
+  web2py.gluon.validators.IS_MATCH
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_MATCH
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_MATCH
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_MATCH
+
    
+
+
    Known Subclasses:
    
+
    
+    IS_ALPHANUMERIC
+
    
+
+
    
+example:
+
    +   INPUT(_type='text', _name='name', requires=IS_MATCH('.+'))
+
    
+  the argument of IS_MATCH is a regular expression:
+
    +   >>> IS_MATCH('.+')('hello')
+   ('hello', None)
+
+   >>> IS_MATCH('.+')('')
+   ('', 'invalid expression')
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        expression,
+        error_message='invalid expression',
+        strict=True)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        expression,
+        error_message='invalid expression',
+        strict=True)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_NOT_EMPTY-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_NOT_EMPTY-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_NOT_EMPTY-class.html
@@ -0,0 +1,299 @@
+
+
+
+
+  web2py.gluon.validators.IS_NOT_EMPTY
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_NOT_EMPTY
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_NOT_EMPTY
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_NOT_EMPTY
+
    
+
+
    
+example:
+
    +   INPUT(_type='text', _name='name', requires=IS_NOT_EMPTY())
+
+   >>> IS_NOT_EMPTY()(1)
+   (1, None)
+   >>> IS_NOT_EMPTY()(0)
+   (0, None)
+   >>> IS_NOT_EMPTY()('x')
+   ('x', None)
+   >>> IS_NOT_EMPTY()(' x ')
+   ('x', None)
+   >>> IS_NOT_EMPTY()(None)
+   (None, 'enter a value')
+   >>> IS_NOT_EMPTY()('')
+   ('', 'enter a value')
+   >>> IS_NOT_EMPTY()('  ')
+   ('', 'enter a value')
+   >>> IS_NOT_EMPTY()(' \n\t')
+   ('', 'enter a value')
+   >>> IS_NOT_EMPTY()([])
+   ([], 'enter a value')
+   >>> IS_NOT_EMPTY(empty_regex='def')('def')
+   ('', 'enter a value')
+   >>> IS_NOT_EMPTY(empty_regex='de[fg]')('deg')
+   ('', 'enter a value')
+   >>> IS_NOT_EMPTY(empty_regex='def')('abc')
+   ('abc', None)
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        error_message='enter a value',
+        empty_regex=1)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        error_message='enter a value',
+        empty_regex=1)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_NOT_IN_DB-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_NOT_IN_DB-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_NOT_IN_DB-class.html
@@ -0,0 +1,296 @@
+
+
+
+
+  web2py.gluon.validators.IS_NOT_IN_DB
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_NOT_IN_DB
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_NOT_IN_DB
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_NOT_IN_DB
+
    
+
+
    
+example:
+
    +   INPUT(_type='text', _name='name', requires=IS_NOT_IN_DB(db, db.table))
+
    
+  makes the field unique

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        dbset,
+        field,
+        error_message='value already in database or empty',
+        allowed_override=[])
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    set_self_id(self,
+        id)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        dbset,
+        field,
+        error_message='value already in database or empty',
+        allowed_override=[])
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_SLUG-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_SLUG-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_SLUG-class.html
@@ -0,0 +1,350 @@
+
+
+
+
+  web2py.gluon.validators.IS_SLUG
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_SLUG
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_SLUG
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_SLUG
+
    
+
+
    
+convert arbitrary text string to a slug
+
    +>>> IS_SLUG()('abc123')
+('abc123', None)
+>>> IS_SLUG()('ABC123')
+('abc123', None)
+>>> IS_SLUG()('abc-123')
+('abc-123', None)
+>>> IS_SLUG()('abc--123')
+('abc-123', None)
+>>> IS_SLUG()('abc 123')
+('abc-123', None)
+>>> IS_SLUG()('abc  _123')
+('abc-123', None)
+>>> IS_SLUG()('-abc-')
+('abc', None)
+>>> IS_SLUG()('--a--b--_ -c--')
+('a-b-c', None)
+>>> IS_SLUG()('abc&amp;123')
+('abc123', None)
+>>> IS_SLUG()('abc&amp;123&amp;def')
+('abc123def', None)
+>>> IS_SLUG()('ñ')
+('n', None)
+>>> IS_SLUG(maxlen=4)('abc123')
+('abc1', None)
+>>> IS_SLUG()('abc_123')
+('abc-123', None)
+>>> IS_SLUG(keep_underscores=False)('abc_123')
+('abc-123', None)
+>>> IS_SLUG(keep_underscores=True)('abc_123')
+('abc_123', None)
+>>> IS_SLUG(check=False)('abc')
+('abc', None)
+>>> IS_SLUG(check=True)('abc')
+('abc', None)
+>>> IS_SLUG(check=False)('a bc')
+('a-bc', None)
+>>> IS_SLUG(check=True)('a bc')
+('a bc', 'must be slug')


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        maxlen=80,
+        check=True,
+        error_message='must be slug',
+        keep_underscores=True)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Static Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    urlify(value,
+        maxlen=80,
+        keep_underscores=True)
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        maxlen=80,
+        check=True,
+        error_message='must be slug',
+        keep_underscores=True)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_STRONG-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_STRONG-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_STRONG-class.html
@@ -0,0 +1,285 @@
+
+
+
+
+  web2py.gluon.validators.IS_STRONG
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_STRONG
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_STRONG
    source code

    
+
    +object --+
+         |
+        IS_STRONG
+
    
+
+
    
+example:
+
    +   INPUT(_type='password', _name='passwd',
+       requires=IS_STRONG(min=10, special=2, upper=2))
+
    
+  enforces complexity requirements on a field

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        min=8,
+        max=20,
+        upper=1,
+        lower=1,
+        number=1,
+        special=1,
+        specials='~!@#$%^&*()_+-=?<>,.:;{}[]|',
+        invalid=' "',
+        error_message=1)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        min=8,
+        max=20,
+        upper=1,
+        lower=1,
+        number=1,
+        special=1,
+        specials='~!@#$%^&*()_+-=?<>,.:;{}[]|',
+        invalid=' "',
+        error_message=1)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_TIME-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_TIME-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_TIME-class.html
@@ -0,0 +1,303 @@
+
+
+
+
+  web2py.gluon.validators.IS_TIME
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_TIME
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_TIME
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_TIME
+
    
+
+
    
+example:
+
    +   INPUT(_type='text', _name='name', requires=IS_TIME())
+
    
+  
    understands the following formats hh:mm:ss [am/pm] hh:mm [am/pm] hh 
+  [am/pm]
    
+  [am/pm] is optional, ':' can be replaced by any other non-space 
+  non-digit
+
    +>>> IS_TIME()('21:30')
+(datetime.time(21, 30), None)
+>>> IS_TIME()('21-30')
+(datetime.time(21, 30), None)
+>>> IS_TIME()('21.30')
+(datetime.time(21, 30), None)
+>>> IS_TIME()('21:30:59')
+(datetime.time(21, 30, 59), None)
+>>> IS_TIME()('5:30')
+(datetime.time(5, 30), None)
+>>> IS_TIME()('5:30 am')
+(datetime.time(5, 30), None)
+>>> IS_TIME()('5:30 pm')
+(datetime.time(17, 30), None)
+>>> IS_TIME()('5:30 whatever')
+('5:30 whatever', 'enter time as hh:mm:ss (seconds, am, pm optional)')
+>>> IS_TIME()('5:30 20')
+('5:30 20', 'enter time as hh:mm:ss (seconds, am, pm optional)')
+>>> IS_TIME()('24:30')
+('24:30', 'enter time as hh:mm:ss (seconds, am, pm optional)')
+>>> IS_TIME()('21:60')
+('21:60', 'enter time as hh:mm:ss (seconds, am, pm optional)')
+>>> IS_TIME()('21:30::')
+('21:30::', 'enter time as hh:mm:ss (seconds, am, pm optional)')
+>>> IS_TIME()('')
+('', 'enter time as hh:mm:ss (seconds, am, pm optional)')


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        error_message='enter time as hh:mm:ss (seconds, am, pm optional)')
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        error_message='enter time as hh:mm:ss (seconds, am, pm optional)')
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_UPLOAD_FILENAME-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_UPLOAD_FILENAME-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_UPLOAD_FILENAME-class.html
@@ -0,0 +1,315 @@
+
+
+
+
+  web2py.gluon.validators.IS_UPLOAD_FILENAME
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_UPLOAD_FILENAME
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_UPLOAD_FILENAME
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_UPLOAD_FILENAME
+
    
+
+
    
+
    +
+Checks if name and extension of file uploaded through file input matches
+given criteria.
+
+Does *not* ensure the file type in any way. Returns validation failure
+if no data was uploaded.
+
+Arguments::
+
+filename: filename (before dot) regex
+extension: extension (after dot) regex
+lastdot: which dot should be used as a filename / extension separator:
+         True means last dot, eg. file.png -> file / png
+         False means first dot, eg. file.tar.gz -> file / tar.gz
+case: 0 - keep the case, 1 - transform the string into lowercase (default),
+      2 - transform the string into uppercase
+
+If there is no dot present, extension checks will be done against empty
+string and filename checks against whole value.
+
+Examples::
+
+    #Check if file has a pdf extension (case insensitive):
+    INPUT(_type='file', _name='name',
+        requires=IS_UPLOAD_FILENAME(extension='pdf'))
+
+    #Check if file has a tar.gz extension and name starting with backup:
+    INPUT(_type='file', _name='name',
+        requires=IS_UPLOAD_FILENAME(filename='backup.*',
+            extension='tar.gz', lastdot=False))
+
+    #Check if file has no extension and name matching README
+    #(case sensitive):
+    INPUT(_type='file', _name='name',
+        requires=IS_UPLOAD_FILENAME(filename='^README$',
+            extension='^$', case=0))
+
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        filename=1,
+        extension=1,
+        lastdot=True,
+        case=1,
+        error_message='enter valid filename')
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        filename=1,
+        extension=1,
+        lastdot=True,
+        case=1,
+        error_message='enter valid filename')
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+        
    (inherited documentation)
    
+    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_UPPER-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_UPPER-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_UPPER-class.html
@@ -0,0 +1,211 @@
+
+
+
+
+  web2py.gluon.validators.IS_UPPER
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_UPPER
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_UPPER
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_UPPER
+
    
+
+
    
+convert to upper case
+
    +>>> IS_UPPER()('abc')
+('ABC', None)
+>>> IS_UPPER()('ñ')
+('\xc3\x91', None)


    
+
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.IS_URL-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.IS_URL-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.IS_URL-class.html
@@ -0,0 +1,392 @@
+
+
+
+
+  web2py.gluon.validators.IS_URL
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class IS_URL
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IS_URL
    source code

    
+
    +object --+    
+         |    
+ Validator --+
+             |
+            IS_URL
+
    
+
+
    
+
    +
+Rejects a URL string if any of the following is true:
+   * The string is empty or None
+   * The string uses characters that are not allowed in a URL
+   * The string breaks any of the HTTP syntactic rules
+   * The URL scheme specified (if one is specified) is not 'http' or 'https'
+   * The top-level domain (if a host name is specified) does not exist
+
+(These rules are based on RFC 2616: http://www.faqs.org/rfcs/rfc2616.html)
+
+This function only checks the URL's syntax. It does not check that the URL
+points to a real document, for example, or that it otherwise makes sense
+semantically. This function does automatically prepend 'http://' in front
+of a URL in the case of an abbreviated URL (e.g. 'google.ca').
+
+If the parameter mode='generic' is used, then this function's behavior
+changes. It then rejects a URL string if any of the following is true:
+   * The string is empty or None
+   * The string uses characters that are not allowed in a URL
+   * The URL scheme specified (if one is specified) is not valid
+
+(These rules are based on RFC 2396: http://www.faqs.org/rfcs/rfc2396.html)
+
+The list of allowed schemes is customizable with the allowed_schemes
+parameter. If you exclude None from the list, then abbreviated URLs
+(lacking a scheme such as 'http') will be rejected.
+
+The default prepended scheme is customizable with the prepend_scheme
+parameter. If you set prepend_scheme to None then prepending will be
+disabled. URLs that require prepending to parse will still be accepted,
+but the return value will not be modified.
+
+IS_URL is compatible with the Internationalized Domain Name (IDN) standard
+specified in RFC 3490 (http://tools.ietf.org/html/rfc3490). As a result,
+URLs can be regular strings or unicode strings.
+If the URL's domain component (e.g. google.ca) contains non-US-ASCII
+letters, then the domain will be converted into Punycode (defined in
+RFC 3492, http://tools.ietf.org/html/rfc3492). IS_URL goes a bit beyond
+the standards, and allows non-US-ASCII characters to be present in the path
+and query components of the URL as well. These non-US-ASCII characters will
+be escaped using the standard '%20' type syntax. e.g. the unicode
+character with hex code 0x4e86 will become '%4e%86'
+
+Code Examples::
+
+    INPUT(_type='text', _name='name', requires=IS_URL())
+    >>> IS_URL()('abc.com')
+    ('http://abc.com', None)
+
+    INPUT(_type='text', _name='name', requires=IS_URL(mode='generic'))
+    >>> IS_URL(mode='generic')('abc.com')
+    ('abc.com', None)
+
+    INPUT(_type='text', _name='name',
+        requires=IS_URL(allowed_schemes=['https'], prepend_scheme='https'))
+    >>> IS_URL(allowed_schemes=['https'], prepend_scheme='https')('https://abc.com')
+    ('https://abc.com', None)
+
+    INPUT(_type='text', _name='name',
+        requires=IS_URL(prepend_scheme='https'))
+    >>> IS_URL(prepend_scheme='https')('abc.com')
+    ('https://abc.com', None)
+
+    INPUT(_type='text', _name='name',
+        requires=IS_URL(mode='generic', allowed_schemes=['ftps', 'https'],
+            prepend_scheme='https'))
+    >>> IS_URL(mode='generic', allowed_schemes=['ftps', 'https'], prepend_scheme='https')('https://abc.com')
+    ('https://abc.com', None)
+    >>> IS_URL(mode='generic', allowed_schemes=['ftps', 'https', None], prepend_scheme='https')('abc.com')
+    ('abc.com', None)
+
+@author: Jonathan Benn
+
+


    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        error_message='enter a valid URL',
+        mode='http',
+        allowed_schemes=1,
+        prepend_scheme='http')
    
+      :param error_message: a string, the error message to give the end user
+    if the URL does not validate
+:param allowed_schemes: a list containing strings or None.    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    __call__(self,
+        value)
    
+      :param value: a unicode or regular string, the URL to validate
+:returns: a (string, string) tuple, where tuple[0] is the modified
+    input value and tuple[1] is either None (success!) or the
+    string error_message.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Validator:
+      formatter
+      
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        error_message='enter a valid URL',
+        mode='http',
+        allowed_schemes=1,
+        prepend_scheme='http')
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  
    +
+:param error_message: a string, the error message to give the end user
+    if the URL does not validate
+:param allowed_schemes: a list containing strings or None. Each element
+    is a scheme the inputed URL is allowed to use
+:param prepend_scheme: a string, this scheme is prepended if it's
+    necessary to make the URL valid
+
+
    
+  
    
+    
    Overrides:
+      object.__init__
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __call__(self,
+        value)
+    
    (Call operator)
+  
    
+      		source code 
+    
    
+  
+  
    +
+:param value: a unicode or regular string, the URL to validate
+:returns: a (string, string) tuple, where tuple[0] is the modified
+    input value and tuple[1] is either None (success!) or the
+    string error_message. The input value will never be modified in the
+    case of an error. However, if there is success then the input URL
+    may be modified to (1) prepend a scheme, and/or (2) convert a
+    non-compliant unicode URL into a compliant US-ASCII version.
+
+
    
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.validators.Validator-class.html
Index: applications/examples/static/epydoc/web2py.gluon.validators.Validator-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.validators.Validator-class.html
@@ -0,0 +1,304 @@
+
+
+
+
+  web2py.gluon.validators.Validator
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module validators ::
+        Class Validator
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Validator
    source code

    
+
    +object --+
+         |
+        Validator
+
    
+
+
    Known Subclasses:
    
+
    
+    CLEANUP,
+    IS_MATCH,
+    IS_DATE,
+    IS_DATETIME,
+    IS_DECIMAL_IN_RANGE,
+    IS_EMAIL,
+    IS_EMPTY_OR,
+    IS_EQUAL_TO,
+    IS_EXPR,
+    IS_FLOAT_IN_RANGE,
+    IS_IMAGE,
+    IS_INT_IN_RANGE,
+    IS_IN_DB,
+    IS_IN_SET,
+    IS_IPV4,
+    IS_LENGTH,
+    IS_LIST_OF,
+    IS_LOWER,
+    IS_NOT_EMPTY,
+    IS_NOT_IN_DB,
+    IS_SLUG,
+    IS_TIME,
+    IS_UPLOAD_FILENAME,
+    IS_UPPER,
+    IS_URL,
+    IS_GENERIC_URL,
+    IS_HTTP_URL
+
    
+
+
    
+
    Root for all validators, mainly for documentation purposes.
    
+  
    Validators are classes used to validate input fields (including forms 
+  generated from database tables).
    
+  Here is an example of using a validator with a FORM:
+
    +   INPUT(_name='a', requires=IS_INT_IN_RANGE(0, 10))
+
    
+  Here is an example of how to require a validator for a table 
+  field:
+
    +   db.define_table('person', SQLField('name'))
+   db.person.name.requires=IS_NOT_EMPTY()
+
    
+  Validators are always assigned using the requires attribute of a 
+  field. A field can have a single validator or multiple validators. 
+  Multiple validators are made part of a list:
+
    +   db.person.name.requires=[IS_NOT_EMPTY(), IS_NOT_IN_DB(db, 'person.id')]
+
    
+  
    Validators are called by the function accepts on a FORM or other HTML 
+  helper object that contains a form. They are always called in the order 
+  in which they are listed.
    
+  Built-in validators have constructors that take the optional argument 
+  error message which allows you to change the default error message. Here 
+  is an example of a validator on a database table:
+
    +   db.person.name.requires=IS_NOT_EMPTY(error_message=T('fill this'))
+
    
+  
    where we have used the translation operator T to allow for 
+  internationalization.
    
+  Notice that default error messages are not translated.

    
+
+
+
+
+
+  
+
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    formatter(self,
+        value)
    
+      For some validators returns a formatted version (matching the 
+      validator) of value.    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __init__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    formatter(self,
+        value)
+  
    
+      		source code 
+    
    
+  
+  For some validators returns a formatted version (matching the 
+  validator) of value. Otherwise just returns the value.
+  
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.widget-module.html
Index: applications/examples/static/epydoc/web2py.gluon.widget-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.widget-module.html
@@ -0,0 +1,384 @@
+
+
+
+
+  web2py.gluon.widget
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module widget
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module widget
    source code

    
+
    This file is part of the web2py Web Framework Copyrighted by Massimo 
+  Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)
    
+  The widget is called from web2py.

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        BaseException
    
+      Common base class for all non-exit exceptions.
+    
    
+       
+    
+        IO
+    
    
+       
+    
+        web2pyDialog
    
+      Main window dialog
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    try_start_browser(url)
    
+      Try to start the default browser    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    start_browser(ip,
+        port)
    
+      Starts the default browser    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    presentation(root)
    
+      Draw the splash screen    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    console()
    
+      Defines the behavior of the console web2py execution    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    start(cron=True)
    
+      Start server    		
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Variables[hide private]
    
+  
    
+       
+    
+        ProgramName = 'web2py Web Framework'
+    
    
+       
+    
+        ProgramAuthor = 'Created by Massimo Di Pierro, Copyright 2007-...
+    
    
+       
+    
+        ProgramVersion = 'Version 1.98.2 (2011-08-03 18:44:38)'
+    
    
+       
+    
+        ProgramInfo = 'web2py Web Framework\n                 Created ...
+    
    
+       
+    
+        msg = msg % sys.version
+    
    
+       
+    
+        logger = logging.getLogger("web2py")
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Variables Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
    ProgramAuthor
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +'Created by Massimo Di Pierro, Copyright 2007-2011'
+
    
+
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
    ProgramInfo
    
+  
+  
    
+  
    
+  
    
+    
    Value:
    
+      
    +'''web2py Web Framework
+                 Created by Massimo Di Pierro, Copyright 2007-2011
+                 Version 1.98.2 (2011-08-03 18:44:38)'''
+
    
+
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.widget-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.widget-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.widget-pysrc.html
@@ -0,0 +1,1416 @@
+
+
+
+
+  web2py.gluon.widget
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module widget
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.widget
    
+
    +  1  #!/usr/bin/env python 
+  2  # -*- coding: utf-8 -*- 
+  3   
+  4  """ 
+  5  This file is part of the web2py Web Framework 
+  6  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+  7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+  8   
+  9  The widget is called from web2py. 
+ 10  """ 
+ 11   
+ 12  import sys 
+ 13  import cStringIO 
+ 14  import time 
+ 15  import thread 
+ 16  import re 
+ 17  import os 
+ 18  import socket 
+ 19  import signal 
+ 20  import math 
+ 21  import logging 
+ 22   
+ 23  import newcron 
+ 24  import main 
+ 25   
+ 26  from fileutils import w2p_pack, read_file, write_file 
+ 27  from shell import run, test 
+ 28  from settings import global_settings 
+ 29   
+ 30  try: 
+ 31      import Tkinter, tkMessageBox 
+ 32      import contrib.taskbar_widget 
+ 33      from winservice import web2py_windows_service_handler 
+ 34  except: 
+ 35      pass 
+ 36   
+ 37   
+ 38  try: 
+ 39      BaseException 
+ 40  except NameError: 
+ 41      BaseException = Exception 
+ 42   
+ 43  ProgramName = 'web2py Web Framework' 
+ 44  ProgramAuthor = 'Created by Massimo Di Pierro, Copyright 2007-2011' 
+ 45  ProgramVersion = read_file('VERSION').strip() 
+ 46   
+ 47  ProgramInfo = '''%s 
+ 48                   %s 
+ 49                   %s''' % (ProgramName, ProgramAuthor, ProgramVersion) 
+ 50   
+ 51  if not sys.version[:3] in ['2.4', '2.5', '2.6', '2.7']: 
+ 52      msg = 'Warning: web2py requires Python 2.4, 2.5 (recommended), 2.6 or 2.7 but you are running:\n%s' 
+ 53      msg = msg % sys.version 
+ 54      sys.stderr.write(msg) 
+ 55   
+ 56  logger = logging.getLogger("web2py") 
+ 57   
+
     58 -class IO(object): 
+
     59      """   """ 
+ 60   
+
     61 -    def __init__(self): 
+
     62          """   """ 
+ 63   
+ 64          self.buffer = cStringIO.StringIO() 
+
     65   
+
     66 -    def write(self, data): 
+
     67          """   """ 
+ 68   
+ 69          sys.__stdout__.write(data) 
+ 70          if hasattr(self, 'callback'): 
+ 71              self.callback(data) 
+ 72          else: 
+ 73              self.buffer.write(data) 
+
     74   
+ 75   
+
     76 -def try_start_browser(url): 
+
     77      """ Try to start the default browser """ 
+ 78   
+ 79      try: 
+ 80          import webbrowser 
+ 81          webbrowser.open(url) 
+ 82      except: 
+ 83          print 'warning: unable to detect your browser' 
+
     84   
+ 85   
+
     86 -def start_browser(ip, port): 
+
     87      """ Starts the default browser """ 
+ 88      print 'please visit:' 
+ 89      print '\thttp://%s:%s' % (ip, port) 
+ 90      print 'starting browser...' 
+ 91      try_start_browser('http://%s:%s' % (ip, port)) 
+
     92   
+ 93   
+
     94 -def presentation(root): 
+
     95      """ Draw the splash screen """ 
+ 96   
+ 97      root.withdraw() 
+ 98   
+ 99      dx = root.winfo_screenwidth() 
+100      dy = root.winfo_screenheight() 
+101   
+102      dialog = Tkinter.Toplevel(root, bg='white') 
+103      dialog.geometry('%ix%i+%i+%i' % (500, 300, dx / 2 - 200, dy / 2 - 150)) 
+104   
+105      dialog.overrideredirect(1) 
+106      dialog.focus_force() 
+107   
+108      canvas = Tkinter.Canvas(dialog, 
+109                              background='white', 
+110                              width=500, 
+111                              height=300) 
+112      canvas.pack() 
+113      root.update() 
+114   
+115      img = Tkinter.PhotoImage(file='splashlogo.gif') 
+116      pnl = Tkinter.Label(canvas, image=img, background='white', bd=0) 
+117      pnl.pack(side='top', fill='both', expand='yes') 
+118      # Prevent garbage collection of img 
+119      pnl.image=img 
+120   
+121      def add_label(text='Change Me', font_size=12, foreground='#195866', height=1): 
+122          return Tkinter.Label( 
+123              master=canvas, 
+124              width=250, 
+125              height=height, 
+126              text=text, 
+127              font=('Helvetica', font_size), 
+128              anchor=Tkinter.CENTER, 
+129              foreground=foreground, 
+130              background='white' 
+131              ) 
+
    132   
+133      add_label('Welcome to...').pack(side='top') 
+134      add_label(ProgramName, 18, '#FF5C1F', 2).pack() 
+135      add_label(ProgramAuthor).pack() 
+136      add_label(ProgramVersion).pack() 
+137   
+138      root.update() 
+139      time.sleep(5) 
+140      dialog.destroy() 
+141      return 
+142   
+143   
+
    144 -class web2pyDialog(object): 
+
    145      """ Main window dialog """ 
+146   
+
    147 -    def __init__(self, root, options): 
+
    148          """ web2pyDialog constructor  """ 
+149   
+150          root.title('web2py server') 
+151          self.root = Tkinter.Toplevel(root) 
+152          self.options = options 
+153          self.menu = Tkinter.Menu(self.root) 
+154          servermenu = Tkinter.Menu(self.menu, tearoff=0) 
+155          httplog = os.path.join(self.options.folder, 'httpserver.log') 
+156   
+157          # Building the Menu 
+158          item = lambda: try_start_browser(httplog) 
+159          servermenu.add_command(label='View httpserver.log', 
+160                                 command=item) 
+161   
+162          servermenu.add_command(label='Quit (pid:%i)' % os.getpid(), 
+163                                 command=self.quit) 
+164   
+165          self.menu.add_cascade(label='Server', menu=servermenu) 
+166   
+167          self.pagesmenu = Tkinter.Menu(self.menu, tearoff=0) 
+168          self.menu.add_cascade(label='Pages', menu=self.pagesmenu) 
+169   
+170          helpmenu = Tkinter.Menu(self.menu, tearoff=0) 
+171   
+172          # Home Page 
+173          item = lambda: try_start_browser('http://www.web2py.com') 
+174          helpmenu.add_command(label='Home Page', 
+175                               command=item) 
+176   
+177          # About 
+178          item = lambda: tkMessageBox.showinfo('About web2py', ProgramInfo) 
+179          helpmenu.add_command(label='About', 
+180                               command=item) 
+181   
+182          self.menu.add_cascade(label='Info', menu=helpmenu) 
+183   
+184          self.root.config(menu=self.menu) 
+185   
+186          if options.taskbar: 
+187              self.root.protocol('WM_DELETE_WINDOW', 
+188                                 lambda: self.quit(True)) 
+189          else: 
+190              self.root.protocol('WM_DELETE_WINDOW', self.quit) 
+191   
+192          sticky = Tkinter.NW 
+193   
+194          # IP 
+195          Tkinter.Label(self.root, 
+196                        text='Server IP:', 
+197                        justify=Tkinter.LEFT).grid(row=0, 
+198                                                   column=0, 
+199                                                   sticky=sticky) 
+200          self.ip = Tkinter.Entry(self.root) 
+201          self.ip.insert(Tkinter.END, self.options.ip) 
+202          self.ip.grid(row=0, column=1, sticky=sticky) 
+203   
+204          # Port 
+205          Tkinter.Label(self.root, 
+206                        text='Server Port:', 
+207                        justify=Tkinter.LEFT).grid(row=1, 
+208                                                   column=0, 
+209                                                   sticky=sticky) 
+210   
+211          self.port_number = Tkinter.Entry(self.root) 
+212          self.port_number.insert(Tkinter.END, self.options.port) 
+213          self.port_number.grid(row=1, column=1, sticky=sticky) 
+214   
+215          # Password 
+216          Tkinter.Label(self.root, 
+217                        text='Choose Password:', 
+218                        justify=Tkinter.LEFT).grid(row=2, 
+219                                                   column=0, 
+220                                                   sticky=sticky) 
+221   
+222          self.password = Tkinter.Entry(self.root, show='*') 
+223          self.password.bind('<Return>', lambda e: self.start()) 
+224          self.password.focus_force() 
+225          self.password.grid(row=2, column=1, sticky=sticky) 
+226   
+227          # Prepare the canvas 
+228          self.canvas = Tkinter.Canvas(self.root, 
+229                                       width=300, 
+230                                       height=100, 
+231                                       bg='black') 
+232          self.canvas.grid(row=3, column=0, columnspan=2) 
+233          self.canvas.after(1000, self.update_canvas) 
+234   
+235          # Prepare the frame 
+236          frame = Tkinter.Frame(self.root) 
+237          frame.grid(row=4, column=0, columnspan=2) 
+238   
+239          # Start button 
+240          self.button_start = Tkinter.Button(frame, 
+241                                             text='start server', 
+242                                             command=self.start) 
+243   
+244          self.button_start.grid(row=0, column=0) 
+245   
+246          # Stop button 
+247          self.button_stop = Tkinter.Button(frame, 
+248                                            text='stop server', 
+249                                            command=self.stop) 
+250   
+251          self.button_stop.grid(row=0, column=1) 
+252          self.button_stop.configure(state='disabled') 
+253   
+254          if options.taskbar: 
+255              self.tb = contrib.taskbar_widget.TaskBarIcon() 
+256              self.checkTaskBar() 
+257   
+258              if options.password != '<ask>': 
+259                  self.password.insert(0, options.password) 
+260                  self.start() 
+261                  self.root.withdraw() 
+262          else: 
+263              self.tb = None 
+
    264   
+
    265 -    def checkTaskBar(self): 
+
    266          """ Check taskbar status """ 
+267   
+268          if self.tb.status: 
+269              if self.tb.status[0] == self.tb.EnumStatus.QUIT: 
+270                  self.quit() 
+271              elif self.tb.status[0] == self.tb.EnumStatus.TOGGLE: 
+272                  if self.root.state() == 'withdrawn': 
+273                      self.root.deiconify() 
+274                  else: 
+275                      self.root.withdraw() 
+276              elif self.tb.status[0] == self.tb.EnumStatus.STOP: 
+277                  self.stop() 
+278              elif self.tb.status[0] == self.tb.EnumStatus.START: 
+279                  self.start() 
+280              elif self.tb.status[0] == self.tb.EnumStatus.RESTART: 
+281                  self.stop() 
+282                  self.start() 
+283              del self.tb.status[0] 
+284   
+285          self.root.after(1000, self.checkTaskBar) 
+
    286   
+
    287 -    def update(self, text): 
+
    288          """ Update app text """ 
+289   
+290          try: 
+291              self.text.configure(state='normal') 
+292              self.text.insert('end', text) 
+293              self.text.configure(state='disabled') 
+294          except: 
+295              pass  # ## this should only happen in case app is destroyed 
+
    296   
+
    297 -    def connect_pages(self): 
+
    298          """ Connect pages """ 
+299   
+300          for arq in os.listdir('applications/'): 
+301              if os.path.exists('applications/%s/__init__.py' % arq): 
+302                  url = self.url + '/' + arq 
+303                  start_browser = lambda u = url: try_start_browser(u) 
+304                  self.pagesmenu.add_command(label=url, 
+305                                             command=start_browser) 
+
    306   
+
    307 -    def quit(self, justHide=False): 
+
    308          """ Finish the program execution """ 
+309   
+310          if justHide: 
+311              self.root.withdraw() 
+312          else: 
+313              try: 
+314                  self.server.stop() 
+315              except: 
+316                  pass 
+317   
+318              try: 
+319                  self.tb.Destroy() 
+320              except: 
+321                  pass 
+322   
+323              self.root.destroy() 
+324              sys.exit() 
+
    325   
+
    326 -    def error(self, message): 
+
    327          """ Show error message """ 
+328   
+329          tkMessageBox.showerror('web2py start server', message) 
+
    330   
+
    331 -    def start(self): 
+
    332          """ Start web2py server """ 
+333   
+334          password = self.password.get() 
+335   
+336          if not password: 
+337              self.error('no password, no web admin interface') 
+338   
+339          ip = self.ip.get() 
+340   
+341          regexp = '\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}' 
+342          if ip and not re.compile(regexp).match(ip): 
+343              return self.error('invalid host ip address') 
+344   
+345          try: 
+346              port = int(self.port_number.get()) 
+347          except: 
+348              return self.error('invalid port number') 
+349   
+350          self.url = 'http://%s:%s' % (ip, port) 
+351          self.connect_pages() 
+352          self.button_start.configure(state='disabled') 
+353   
+354          try: 
+355              options = self.options 
+356              req_queue_size = options.request_queue_size 
+357              self.server = main.HttpServer( 
+358                  ip, 
+359                  port, 
+360                  password, 
+361                  pid_filename=options.pid_filename, 
+362                  log_filename=options.log_filename, 
+363                  profiler_filename=options.profiler_filename, 
+364                  ssl_certificate=options.ssl_certificate, 
+365                  ssl_private_key=options.ssl_private_key, 
+366                  min_threads=options.minthreads, 
+367                  max_threads=options.maxthreads, 
+368                  server_name=options.server_name, 
+369                  request_queue_size=req_queue_size, 
+370                  timeout=options.timeout, 
+371                  shutdown_timeout=options.shutdown_timeout, 
+372                  path=options.folder, 
+373                  interfaces=options.interfaces) 
+374   
+375              thread.start_new_thread(self.server.start, ()) 
+376          except Exception, e: 
+377              self.button_start.configure(state='normal') 
+378              return self.error(str(e)) 
+379   
+380          self.button_stop.configure(state='normal') 
+381   
+382          if not options.taskbar: 
+383              thread.start_new_thread(start_browser, (ip, port)) 
+384   
+385          self.password.configure(state='readonly') 
+386          self.ip.configure(state='readonly') 
+387          self.port_number.configure(state='readonly') 
+388   
+389          if self.tb: 
+390              self.tb.SetServerRunning() 
+
    391   
+
    392 -    def stop(self): 
+
    393          """ Stop web2py server """ 
+394   
+395          self.button_start.configure(state='normal') 
+396          self.button_stop.configure(state='disabled') 
+397          self.password.configure(state='normal') 
+398          self.ip.configure(state='normal') 
+399          self.port_number.configure(state='normal') 
+400          self.server.stop() 
+401   
+402          if self.tb: 
+403              self.tb.SetServerStopped() 
+
    404   
+
    405 -    def update_canvas(self): 
+
    406          """ Update canvas """ 
+407   
+408          try: 
+409              t1 = os.path.getsize('httpserver.log') 
+410          except: 
+411              self.canvas.after(1000, self.update_canvas) 
+412              return 
+413   
+414          try: 
+415              fp = open('httpserver.log', 'r') 
+416              fp.seek(self.t0) 
+417              data = fp.read(t1 - self.t0) 
+418              fp.close() 
+419              value = self.p0[1:] + [10 + 90.0 / math.sqrt(1 + data.count('\n'))] 
+420              self.p0 = value 
+421   
+422              for i in xrange(len(self.p0) - 1): 
+423                  c = self.canvas.coords(self.q0[i]) 
+424                  self.canvas.coords(self.q0[i], 
+425                                     (c[0], 
+426                                      self.p0[i], 
+427                                      c[2], 
+428                                      self.p0[i + 1])) 
+429              self.t0 = t1 
+430          except BaseException: 
+431              self.t0 = time.time() 
+432              self.t0 = t1 
+433              self.p0 = [100] * 300 
+434              self.q0 = [self.canvas.create_line(i, 100, i + 1, 100, 
+435                         fill='green') for i in xrange(len(self.p0) - 1)] 
+436   
+437          self.canvas.after(1000, self.update_canvas) 
+
    438   
+439   
+
    440 -def console(): 
+
    441      """ Defines the behavior of the console web2py execution """ 
+442      import optparse 
+443      import textwrap 
+444   
+445      usage = "python web2py.py" 
+446   
+447      description = """\ 
+448      web2py Web Framework startup script. 
+449      ATTENTION: unless a password is specified (-a 'passwd') web2py will 
+450      attempt to run a GUI. In this case command line options are ignored.""" 
+451   
+452      description = textwrap.dedent(description) 
+453   
+454      parser = optparse.OptionParser(usage, None, optparse.Option, ProgramVersion) 
+455   
+456      parser.description = description 
+457   
+458      parser.add_option('-i', 
+459                        '--ip', 
+460                        default='127.0.0.1', 
+461                        dest='ip', 
+462                        help='ip address of the server (127.0.0.1)') 
+463   
+464      parser.add_option('-p', 
+465                        '--port', 
+466                        default='8000', 
+467                        dest='port', 
+468                        type='int', 
+469                        help='port of server (8000)') 
+470   
+471      msg = 'password to be used for administration' 
+472      msg += ' (use -a "<recycle>" to reuse the last password))' 
+473      parser.add_option('-a', 
+474                        '--password', 
+475                        default='<ask>', 
+476                        dest='password', 
+477                        help=msg) 
+478   
+479      parser.add_option('-c', 
+480                        '--ssl_certificate', 
+481                        default='', 
+482                        dest='ssl_certificate', 
+483                        help='file that contains ssl certificate') 
+484   
+485      parser.add_option('-k', 
+486                        '--ssl_private_key', 
+487                        default='', 
+488                        dest='ssl_private_key', 
+489                        help='file that contains ssl private key') 
+490   
+491      parser.add_option('-d', 
+492                        '--pid_filename', 
+493                        default='httpserver.pid', 
+494                        dest='pid_filename', 
+495                        help='file to store the pid of the server') 
+496   
+497      parser.add_option('-l', 
+498                        '--log_filename', 
+499                        default='httpserver.log', 
+500                        dest='log_filename', 
+501                        help='file to log connections') 
+502   
+503      parser.add_option('-n', 
+504                        '--numthreads', 
+505                        default=None, 
+506                        type='int', 
+507                        dest='numthreads', 
+508                        help='number of threads (deprecated)') 
+509   
+510      parser.add_option('--minthreads', 
+511                        default=None, 
+512                        type='int', 
+513                        dest='minthreads', 
+514                        help='minimum number of server threads') 
+515   
+516      parser.add_option('--maxthreads', 
+517                        default=None, 
+518                        type='int', 
+519                        dest='maxthreads', 
+520                        help='maximum number of server threads') 
+521   
+522      parser.add_option('-s', 
+523                        '--server_name', 
+524                        default=socket.gethostname(), 
+525                        dest='server_name', 
+526                        help='server name for the web server') 
+527   
+528      msg = 'max number of queued requests when server unavailable' 
+529      parser.add_option('-q', 
+530                        '--request_queue_size', 
+531                        default='5', 
+532                        type='int', 
+533                        dest='request_queue_size', 
+534                        help=msg) 
+535   
+536      parser.add_option('-o', 
+537                        '--timeout', 
+538                        default='10', 
+539                        type='int', 
+540                        dest='timeout', 
+541                        help='timeout for individual request (10 seconds)') 
+542   
+543      parser.add_option('-z', 
+544                        '--shutdown_timeout', 
+545                        default='5', 
+546                        type='int', 
+547                        dest='shutdown_timeout', 
+548                        help='timeout on shutdown of server (5 seconds)') 
+549      parser.add_option('-f', 
+550                        '--folder', 
+551                        default=os.getcwd(), 
+552                        dest='folder', 
+553                        help='folder from which to run web2py') 
+554   
+555      parser.add_option('-v', 
+556                        '--verbose', 
+557                        action='store_true', 
+558                        dest='verbose', 
+559                        default=False, 
+560                        help='increase --test verbosity') 
+561   
+562      parser.add_option('-Q', 
+563                        '--quiet', 
+564                        action='store_true', 
+565                        dest='quiet', 
+566                        default=False, 
+567                        help='disable all output') 
+568   
+569      msg = 'set debug output level (0-100, 0 means all, 100 means none;' 
+570      msg += ' default is 30)' 
+571      parser.add_option('-D', 
+572                        '--debug', 
+573                        dest='debuglevel', 
+574                        default=30, 
+575                        type='int', 
+576                        help=msg) 
+577   
+578      msg = 'run web2py in interactive shell or IPython (if installed) with' 
+579      msg += ' specified appname (if app does not exist it will be created).' 
+580      msg += ' APPNAME like a/c/f (c,f optional)' 
+581      parser.add_option('-S', 
+582                        '--shell', 
+583                        dest='shell', 
+584                        metavar='APPNAME', 
+585                        help=msg) 
+586   
+587      msg = 'run web2py in interactive shell or bpython (if installed) with' 
+588      msg += ' specified appname (if app does not exist it will be created).' 
+589      msg += '\n Use combined with --shell' 
+590      parser.add_option('-B', 
+591                        '--bpython', 
+592                        action='store_true', 
+593                        default=False, 
+594                        dest='bpython', 
+595                        help=msg) 
+596   
+597      msg = 'only use plain python shell; should be used with --shell option' 
+598      parser.add_option('-P', 
+599                        '--plain', 
+600                        action='store_true', 
+601                        default=False, 
+602                        dest='plain', 
+603                        help=msg) 
+604   
+605      msg = 'auto import model files; default is False; should be used' 
+606      msg += ' with --shell option' 
+607      parser.add_option('-M', 
+608                        '--import_models', 
+609                        action='store_true', 
+610                        default=False, 
+611                        dest='import_models', 
+612                        help=msg) 
+613   
+614      msg = 'run PYTHON_FILE in web2py environment;' 
+615      msg += ' should be used with --shell option' 
+616      parser.add_option('-R', 
+617                        '--run', 
+618                        dest='run', 
+619                        metavar='PYTHON_FILE', 
+620                        default='', 
+621                        help=msg) 
+622   
+623      msg = 'run doctests in web2py environment; ' +\ 
+624          'TEST_PATH like a/c/f (c,f optional)' 
+625      parser.add_option('-T', 
+626                        '--test', 
+627                        dest='test', 
+628                        metavar='TEST_PATH', 
+629                        default=None, 
+630                        help=msg) 
+631   
+632      parser.add_option('-W', 
+633                        '--winservice', 
+634                        dest='winservice', 
+635                        default='', 
+636                        help='-W install|start|stop as Windows service') 
+637   
+638      msg = 'trigger a cron run manually; usually invoked from a system crontab' 
+639      parser.add_option('-C', 
+640                        '--cron', 
+641                        action='store_true', 
+642                        dest='extcron', 
+643                        default=False, 
+644                        help=msg) 
+645   
+646      msg = 'triggers the use of softcron' 
+647      parser.add_option('--softcron', 
+648                        action='store_true', 
+649                        dest='softcron', 
+650                        default=False, 
+651                        help=msg) 
+652   
+653      parser.add_option('-N', 
+654                        '--no-cron', 
+655                        action='store_true', 
+656                        dest='nocron', 
+657                        default=False, 
+658                        help='do not start cron automatically') 
+659   
+660      parser.add_option('-J', 
+661                        '--cronjob', 
+662                        action='store_true', 
+663                        dest='cronjob', 
+664                        default=False, 
+665                        help='identify cron-initiated command') 
+666   
+667      parser.add_option('-L', 
+668                        '--config', 
+669                        dest='config', 
+670                        default='', 
+671                        help='config file') 
+672   
+673      parser.add_option('-F', 
+674                        '--profiler', 
+675                        dest='profiler_filename', 
+676                        default=None, 
+677                        help='profiler filename') 
+678   
+679      parser.add_option('-t', 
+680                        '--taskbar', 
+681                        action='store_true', 
+682                        dest='taskbar', 
+683                        default=False, 
+684                        help='use web2py gui and run in taskbar (system tray)') 
+685   
+686      parser.add_option('', 
+687                        '--nogui', 
+688                        action='store_true', 
+689                        default=False, 
+690                        dest='nogui', 
+691                        help='text-only, no GUI') 
+692   
+693      parser.add_option('-A', 
+694                        '--args', 
+695                        action='store', 
+696                        dest='args', 
+697                        default=None, 
+698                        help='should be followed by a list of arguments to be passed to script, to be used with -S, -A must be the last option') 
+699   
+700      parser.add_option('--no-banner', 
+701                        action='store_true', 
+702                        default=False, 
+703                        dest='nobanner', 
+704                        help='Do not print header banner') 
+705   
+706      msg = 'listen on multiple addresses: "ip:port:cert:key;ip2:port2:cert2:key2;..." (:cert:key optional; no spaces)' 
+707      parser.add_option('--interfaces', 
+708                        action='store', 
+709                        dest='interfaces', 
+710                        default=None, 
+711                        help=msg) 
+712   
+713      if '-A' in sys.argv: k = sys.argv.index('-A') 
+714      elif '--args' in sys.argv: k = sys.argv.index('--args') 
+715      else: k=len(sys.argv) 
+716      sys.argv, other_args = sys.argv[:k], sys.argv[k+1:] 
+717      (options, args) = parser.parse_args() 
+718      options.args = [options.run] + other_args 
+719      global_settings.cmd_options = options 
+720      global_settings.cmd_args = args 
+721   
+722      if options.quiet: 
+723          capture = cStringIO.StringIO() 
+724          sys.stdout = capture 
+725          logger.setLevel(logging.CRITICAL + 1) 
+726      else: 
+727          logger.setLevel(options.debuglevel) 
+728   
+729      if options.config[-3:] == '.py': 
+730          options.config = options.config[:-3] 
+731   
+732      if options.cronjob: 
+733          global_settings.cronjob = True  # tell the world 
+734          options.nocron = True   # don't start cron jobs 
+735          options.plain = True    # cronjobs use a plain shell 
+736   
+737      options.folder = os.path.abspath(options.folder) 
+738   
+739      #  accept --interfaces in the form "ip:port:cert:key;ip2:port2;ip3:port3:cert3:key3" 
+740      #  (no spaces; optional cert:key indicate SSL) 
+741      # 
+742      if isinstance(options.interfaces, str): 
+743          options.interfaces = [interface.split(':') for interface in options.interfaces.split(';')] 
+744          for interface in options.interfaces: 
+745              interface[1] = int(interface[1])    # numeric port 
+746          options.interfaces = [tuple(interface) for interface in options.interfaces] 
+747   
+748      if options.numthreads is not None and options.minthreads is None: 
+749          options.minthreads = options.numthreads  # legacy 
+750   
+751      if not options.cronjob: 
+752          # If we have the applications package or if we should upgrade 
+753          if not os.path.exists('applications/__init__.py'): 
+754              write_file('applications/__init__.py', '') 
+755   
+756          if not os.path.exists('welcome.w2p') or os.path.exists('NEWINSTALL'): 
+757              try: 
+758                  w2p_pack('welcome.w2p','applications/welcome') 
+759                  os.unlink('NEWINSTALL') 
+760              except: 
+761                  msg = "New installation: unable to create welcome.w2p file" 
+762                  sys.stderr.write(msg) 
+763   
+764      return (options, args) 
+
    765   
+766   
+
    767 -def start(cron=True): 
+
    768      """ Start server  """ 
+769   
+770      # ## get command line arguments 
+771   
+772      (options, args) = console() 
+773   
+774      if not options.nobanner: 
+775          print ProgramName 
+776          print ProgramAuthor 
+777          print ProgramVersion 
+778   
+779      from dal import drivers 
+780      if not options.nobanner: 
+781          print 'Database drivers available: %s' % ', '.join(drivers) 
+782   
+783   
+784      # ## if -L load options from options.config file 
+785      if options.config: 
+786          try: 
+787              options2 = __import__(options.config, {}, {}, '') 
+788          except Exception: 
+789              try: 
+790                  # Jython doesn't like the extra stuff 
+791                  options2 = __import__(options.config) 
+792              except Exception: 
+793                  print 'Cannot import config file [%s]' % options.config 
+794                  sys.exit(1) 
+795          for key in dir(options2): 
+796              if hasattr(options,key): 
+797                  setattr(options,key,getattr(options2,key)) 
+798   
+799      # ## if -T run doctests (no cron) 
+800      if hasattr(options,'test') and options.test: 
+801          test(options.test, verbose=options.verbose) 
+802          return 
+803   
+804      # ## if -S start interactive shell (also no cron) 
+805      if options.shell: 
+806          if options.args!=None: 
+807              sys.argv[:] = options.args 
+808          run(options.shell, plain=options.plain, bpython=options.bpython, 
+809              import_models=options.import_models, startfile=options.run) 
+810          return 
+811   
+812      # ## if -C start cron run (extcron) and exit 
+813      # ## if -N or not cron disable cron in this *process* 
+814      # ## if --softcron use softcron 
+815      # ## use hardcron in all other cases 
+816      if options.extcron: 
+817          print 'Starting extcron...' 
+818          global_settings.web2py_crontype = 'external' 
+819          extcron = newcron.extcron(options.folder) 
+820          extcron.start() 
+821          extcron.join() 
+822          return 
+823      elif cron and not options.nocron and options.softcron: 
+824          print 'Using softcron (but this is not very efficient)' 
+825          global_settings.web2py_crontype = 'soft' 
+826      elif cron and not options.nocron: 
+827          print 'Starting hardcron...' 
+828          global_settings.web2py_crontype = 'hard' 
+829          newcron.hardcron(options.folder).start() 
+830   
+831      # ## if -W install/start/stop web2py as service 
+832      if options.winservice: 
+833          if os.name == 'nt': 
+834              web2py_windows_service_handler(['', options.winservice], 
+835                      options.config) 
+836          else: 
+837              print 'Error: Windows services not supported on this platform' 
+838              sys.exit(1) 
+839          return 
+840   
+841      # ## if no password provided and havetk start Tk interface 
+842      # ## or start interface if we want to put in taskbar (system tray) 
+843   
+844      try: 
+845          options.taskbar 
+846      except: 
+847          options.taskbar = False 
+848   
+849      if options.taskbar and os.name != 'nt': 
+850          print 'Error: taskbar not supported on this platform' 
+851          sys.exit(1) 
+852   
+853      root = None 
+854   
+855      if not options.nogui: 
+856          try: 
+857              import Tkinter 
+858              havetk = True 
+859          except ImportError: 
+860              logger.warn('GUI not available because Tk library is not installed') 
+861              havetk = False 
+862   
+863          if options.password == '<ask>' and havetk or options.taskbar and havetk: 
+864              try: 
+865                  root = Tkinter.Tk() 
+866              except: 
+867                  pass 
+868   
+869      if root: 
+870          root.focus_force() 
+871          if not options.quiet: 
+872              presentation(root) 
+873          master = web2pyDialog(root, options) 
+874          signal.signal(signal.SIGTERM, lambda a, b: master.quit()) 
+875   
+876          try: 
+877              root.mainloop() 
+878          except: 
+879              master.quit() 
+880   
+881          sys.exit() 
+882   
+883      # ## if no tk and no password, ask for a password 
+884   
+885      if not root and options.password == '<ask>': 
+886          options.password = raw_input('choose a password:') 
+887   
+888      if not options.password and not options.nobanner: 
+889          print 'no password, no admin interface' 
+890   
+891      # ## start server 
+892   
+893      (ip, port) = (options.ip, int(options.port)) 
+894   
+895      if not options.nobanner: 
+896          print 'please visit:' 
+897          print '\thttp://%s:%s' % (ip, port) 
+898          print 'use "kill -SIGTERM %i" to shutdown the web2py server' % os.getpid() 
+899   
+900      server = main.HttpServer(ip=ip, 
+901                               port=port, 
+902                               password=options.password, 
+903                               pid_filename=options.pid_filename, 
+904                               log_filename=options.log_filename, 
+905                               profiler_filename=options.profiler_filename, 
+906                               ssl_certificate=options.ssl_certificate, 
+907                               ssl_private_key=options.ssl_private_key, 
+908                               min_threads=options.minthreads, 
+909                               max_threads=options.maxthreads, 
+910                               server_name=options.server_name, 
+911                               request_queue_size=options.request_queue_size, 
+912                               timeout=options.timeout, 
+913                               shutdown_timeout=options.shutdown_timeout, 
+914                               path=options.folder, 
+915                               interfaces=options.interfaces) 
+916   
+917      try: 
+918          server.start() 
+919      except KeyboardInterrupt: 
+920          server.stop() 
+921      logging.shutdown() 
+
    922   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:05 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.widget.IO-class.html
Index: applications/examples/static/epydoc/web2py.gluon.widget.IO-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.widget.IO-class.html
@@ -0,0 +1,259 @@
+
+
+
+
+  web2py.gluon.widget.IO
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module widget ::
+        Class IO
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class IO
    source code

    
+
    +object --+
+         |
+        IO
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self)
    
+      x.__init__(...) initializes x; see x.__class__.__doc__ for 
+      signature    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    write(self,
+        data)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  x.__init__(...) initializes x; see x.__class__.__doc__ for 
+  signature
+  
    
+    
    Overrides:
+      object.__init__
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.widget.web2pyDialog-class.html
Index: applications/examples/static/epydoc/web2py.gluon.widget.web2pyDialog-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.widget.web2pyDialog-class.html
@@ -0,0 +1,385 @@
+
+
+
+
+  web2py.gluon.widget.web2pyDialog
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module widget ::
+        Class web2pyDialog
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class web2pyDialog
    source code

    
+
    +object --+
+         |
+        web2pyDialog
+
    
+
+
    
+Main window dialog

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        root,
+        options)
    
+      web2pyDialog constructor    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    checkTaskBar(self)
    
+      Check taskbar status    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    update(self,
+        text)
    
+      Update app text    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    connect_pages(self)
    
+      Connect pages    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    quit(self,
+        justHide=True)
    
+      Finish the program execution    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    error(self,
+        message)
    
+      Show error message    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    start(self)
    
+      Start web2py server    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    stop(self)
    
+      Stop web2py server    		
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    update_canvas(self)
    
+      Update canvas    		
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from object:
+      __delattr__,
+      __getattribute__,
+      __hash__,
+      __new__,
+      __reduce__,
+      __reduce_ex__,
+      __repr__,
+      __setattr__,
+      __str__
+      
    
+    
    
+
+
+
+
+  
+
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Properties[hide private]
    
+  
    
+    
    Inherited from object:
+      __class__
+      
    
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    __init__(self,
+        root,
+        options)
+    
    (Constructor)
+  
    
+      		source code 
+    
    
+  
+  web2pyDialog constructor
+  
    
+    
    Overrides:
+      object.__init__
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.winservice-module.html
Index: applications/examples/static/epydoc/web2py.gluon.winservice-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.winservice-module.html
@@ -0,0 +1,190 @@
+
+
+
+
+  web2py.gluon.winservice
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module winservice
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module winservice
    source code

    
+
    This file is part of the web2py Web Framework Developed by Massimo Di 
+  Pierro <mdipierro@cs.depaul.edu> and Limodou 
+  <limodou@gmail.com>. License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)
    
+  This makes uses of the pywin32 package 
+  (http://sourceforge.net/projects/pywin32/). You do not need to install 
+  this package to use web2py.

    
+
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Classes[hide private]
    
+  
    
+       
+    
+        Service
+    
    
+       
+    
+        Web2pyService
+    
    
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    web2py_windows_service_handler(argv=None,
+        opt_file='options')
+            source code
+            
+          
    
+      
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.winservice-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.winservice-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.winservice-pysrc.html
@@ -0,0 +1,472 @@
+
+
+
+
+  web2py.gluon.winservice
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module winservice
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.winservice
    
+
    +  1  #!/usr/bin/env python 
+  2  # -*- coding: utf-8 -*- 
+  3  """ 
+  4  This file is part of the web2py Web Framework 
+  5  Developed by Massimo Di Pierro <mdipierro@cs.depaul.edu> and 
+  6  Limodou <limodou@gmail.com>. 
+  7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+  8   
+  9  This makes uses of the pywin32 package 
+ 10  (http://sourceforge.net/projects/pywin32/). 
+ 11  You do not need to install this package to use web2py. 
+ 12   
+ 13   
+ 14  """ 
+ 15   
+ 16  import time 
+ 17  import os 
+ 18  import sys 
+ 19  import traceback 
+ 20  try: 
+ 21      import win32serviceutil 
+ 22      import win32service 
+ 23      import win32event 
+ 24  except: 
+ 25      if os.name == 'nt': 
+ 26          print "Warning, winservice is unable to install the Mark Hammond Win32 extensions" 
+ 27  import servicemanager 
+ 28  import _winreg 
+ 29  from fileutils import up 
+ 30   
+ 31  __all__ = ['web2py_windows_service_handler'] 
+ 32   
+
     33 -class Service(win32serviceutil.ServiceFramework): 
+
     34   
+ 35      _svc_name_ = '_unNamed' 
+ 36      _svc_display_name_ = '_Service Template' 
+ 37   
+
     38 -    def __init__(self, *args): 
+
     39          win32serviceutil.ServiceFramework.__init__(self, *args) 
+ 40          self.stop_event = win32event.CreateEvent(None, 0, 0, None) 
+
     41   
+
     42 -    def log(self, msg): 
+
     43          servicemanager.LogInfoMsg(str(msg)) 
+
     44   
+
     45 -    def SvcDoRun(self): 
+
     46          self.ReportServiceStatus(win32service.SERVICE_START_PENDING) 
+ 47          try: 
+ 48              self.ReportServiceStatus(win32service.SERVICE_RUNNING) 
+ 49              self.start() 
+ 50              win32event.WaitForSingleObject(self.stop_event, 
+ 51                      win32event.INFINITE) 
+ 52          except: 
+ 53              self.log(traceback.format_exc(sys.exc_info)) 
+ 54              self.SvcStop() 
+ 55          self.ReportServiceStatus(win32service.SERVICE_STOPPED) 
+
     56   
+
     57 -    def SvcStop(self): 
+
     58          self.ReportServiceStatus(win32service.SERVICE_STOP_PENDING) 
+ 59          try: 
+ 60              self.stop() 
+ 61          except: 
+ 62              self.log(traceback.format_exc(sys.exc_info)) 
+ 63          win32event.SetEvent(self.stop_event) 
+ 64          self.ReportServiceStatus(win32service.SERVICE_STOPPED) 
+
     65   
+ 66      # to be overridden 
+ 67   
+
     68 -    def start(self): 
+
     69          pass 
+
     70   
+ 71      # to be overridden 
+ 72   
+
     73 -    def stop(self): 
+
     74          pass 
+
     75   
+ 76   
+
     77 -class Web2pyService(Service): 
+
     78   
+ 79      _svc_name_ = 'web2py' 
+ 80      _svc_display_name_ = 'web2py Service' 
+ 81      _exe_args_ = 'options' 
+ 82      server = None 
+ 83   
+
     84 -    def chdir(self): 
+
     85          try: 
+ 86              h = _winreg.OpenKey(_winreg.HKEY_LOCAL_MACHINE, 
+ 87                                  r'SYSTEM\CurrentControlSet\Services\%s' 
+ 88                                   % self._svc_name_) 
+ 89              try: 
+ 90                  cls = _winreg.QueryValue(h, 'PythonClass') 
+ 91              finally: 
+ 92                  _winreg.CloseKey(h) 
+ 93              dir = os.path.dirname(cls) 
+ 94              os.chdir(dir) 
+ 95              return True 
+ 96          except: 
+ 97              self.log("Can't change to web2py working path; server is stopped") 
+ 98              return False 
+
     99   
+
    100 -    def start(self): 
+
    101          self.log('web2py server starting') 
+102          if not self.chdir(): 
+103              return 
+104          if len(sys.argv) == 2: 
+105              opt_mod = sys.argv[1] 
+106          else: 
+107              opt_mod = self._exe_args_ 
+108          options = __import__(opt_mod, [], [], '') 
+109          if True: # legacy support for old options files, which have only (deprecated) numthreads 
+110              if hasattr(options, 'numthreads') and not hasattr(options, 'minthreads'): 
+111                  options.minthreads = options.numthreads 
+112              if not hasattr(options, 'minthreads'): options.minthreads = None 
+113              if not hasattr(options, 'maxthreads'): options.maxthreads = None 
+114          import main 
+115          self.server = main.HttpServer( 
+116              ip=options.ip, 
+117              port=options.port, 
+118              password=options.password, 
+119              pid_filename=options.pid_filename, 
+120              log_filename=options.log_filename, 
+121              profiler_filename=options.profiler_filename, 
+122              ssl_certificate=options.ssl_certificate, 
+123              ssl_private_key=options.ssl_private_key, 
+124              min_threads=options.minthreads, 
+125              max_threads=options.maxthreads, 
+126              server_name=options.server_name, 
+127              request_queue_size=options.request_queue_size, 
+128              timeout=options.timeout, 
+129              shutdown_timeout=options.shutdown_timeout, 
+130              path=options.folder 
+131              ) 
+132          try: 
+133              self.server.start() 
+134          except: 
+135   
+136              # self.server.stop() 
+137   
+138              self.server = None 
+139              raise 
+
    140   
+
    141 -    def stop(self): 
+
    142          self.log('web2py server stopping') 
+143          if not self.chdir(): 
+144              return 
+145          if self.server: 
+146              self.server.stop() 
+147          time.sleep(1) 
+
    148   
+149   
+
    150 -def web2py_windows_service_handler(argv=None, opt_file='options'): 
+
    151      path = os.path.dirname(__file__) 
+152      classstring = os.path.normpath(os.path.join(up(path), 
+153                                     'gluon.winservice.Web2pyService')) 
+154      if opt_file: 
+155          Web2pyService._exe_args_ = opt_file 
+156          win32serviceutil.HandleCommandLine(Web2pyService, 
+157                  serviceClassString=classstring, argv=['', 'install']) 
+158      win32serviceutil.HandleCommandLine(Web2pyService, 
+159              serviceClassString=classstring, argv=argv) 
+
    160   
+161   
+162  if __name__ == '__main__': 
+163      web2py_windows_service_handler() 
+164   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:04 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.winservice.Service-class.html
Index: applications/examples/static/epydoc/web2py.gluon.winservice.Service-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.winservice.Service-class.html
@@ -0,0 +1,271 @@
+
+
+
+
+  web2py.gluon.winservice.Service
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module winservice ::
+        Class Service
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Service
    source code

    
+
    +win32serviceutil.ServiceFramework --+
+                                    |
+                                   Service
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    __init__(self,
+        *args)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    log(self,
+        msg)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    SvcDoRun(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    SvcStop(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    start(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    stop(self)
+            source code
+            
+          
    
+      
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        _svc_name_ = '_unNamed'
+    
    
+       
+    
+        _svc_display_name_ = '_Service Template'
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.winservice.Web2pyService-class.html
Index: applications/examples/static/epydoc/web2py.gluon.winservice.Web2pyService-class.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.winservice.Web2pyService-class.html
@@ -0,0 +1,311 @@
+
+
+
+
+  web2py.gluon.winservice.Web2pyService
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module winservice ::
+        Class Web2pyService
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Class Web2pyService
    source code

    
+
    +win32serviceutil.ServiceFramework --+    
+                                    |    
+                              Service --+
+                                        |
+                                       Web2pyService
+
    
+
+
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+  
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Instance Methods[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    chdir(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    start(self)
+            source code
+            
+          
    
+      
+    
    
+       
+    
+      
+        
+          
+          
+        
+      
    stop(self)
+            source code
+            
+          
    
+      
+    
    
+    
    Inherited from Service:
+      SvcDoRun,
+      SvcStop,
+      __init__,
+      log
+      
    
+    
    
+
+
+
+
+  
+
+
+    
+  
+
+    
+  
+
+    
+  
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Class Variables[hide private]
    
+  
    
+       
+    
+        _svc_name_ = 'web2py'
+    
    
+       
+    
+        _svc_display_name_ = 'web2py Service'
+    
    
+       
+    
+        _exe_args_ = 'options'
+    
    
+       
+    
+        server = 1
    
+      PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+    
    
+
+
+
+
+  
+
+
    
+    
+      
+        
+        
+      
+    
    Method Details[hide private]
    
+  
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    start(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      Service.start
+    
    
+  
    
+
    
+
    
+
+
    
+
+
    
+  
+  
+  
    
+  
    stop(self)
+  
    
+      		source code 
+    
    
+  
+  
+  
    
+    
    Overrides:
+      Service.stop
+    
    
+  
    
+
    
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:02 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.xmlrpc-module.html
Index: applications/examples/static/epydoc/web2py.gluon.xmlrpc-module.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.xmlrpc-module.html
@@ -0,0 +1,155 @@
+
+
+
+
+  web2py.gluon.xmlrpc
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module xmlrpc
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
+
    Module xmlrpc
    source code

    
+This file is part of the web2py Web Framework Copyrighted by Massimo 
+  Di Pierro <mdipierro@cs.depaul.edu> License: LGPLv3 
+  (http://www.gnu.org/licenses/lgpl.html)

    
+
+
+
+
+
+  
+
+
+    
+  
+
    
+    
+      
+        
+        
+      
+    
    Functions[hide private]
    
+  
    
+       
+    
+      
+        
+          
+          
+        
+      
    handler(request,
+        response,
+        methods)
+            source code
+            
+          
    
+      
+    
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:46:59 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/epydoc/web2py.gluon.xmlrpc-pysrc.html
Index: applications/examples/static/epydoc/web2py.gluon.xmlrpc-pysrc.html
==================================================================
--- /dev/null
+++ applications/examples/static/epydoc/web2py.gluon.xmlrpc-pysrc.html
@@ -0,0 +1,147 @@
+
+
+
+
+  web2py.gluon.xmlrpc
+  
+  
+
+
+
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+      
+        Package web2py ::
+        Package gluon ::
+        Module xmlrpc
+      
+    
+      
+        
+        
+        
+      
    [hide private]
    [frames] | no frames]
    
+    
    
+
    Source Code for Module web2py.gluon.xmlrpc
    
+
    + 1  #!/usr/bin/env python 
+ 2  # -*- coding: utf-8 -*- 
+ 3   
+ 4  """ 
+ 5  This file is part of the web2py Web Framework 
+ 6  Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu> 
+ 7  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+ 8  """ 
+ 9   
+10  from SimpleXMLRPCServer import SimpleXMLRPCDispatcher 
+11   
+12   
+
    13 -def handler(request, response, methods): 
+
    14      response.session_id = None  # no sessions for xmlrpc 
+15      dispatcher = SimpleXMLRPCDispatcher(allow_none=True, encoding=None) 
+16      for method in methods: 
+17          dispatcher.register_function(method) 
+18      dispatcher.register_introspection_functions() 
+19      response.headers['Content-Type'] = 'text/xml' 
+20      dispatch = getattr(dispatcher, '_dispatch', None) 
+21      return dispatcher._marshaled_dispatch(request.body.read(), dispatch) 
+
    22   
+
    
+
    
+
+
+  
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+
+  
+      
+  
+
       Home      Trees      Indices      Help   
+        
+          
+          
    web2py Web Framework
    
+
+  
+    
+    
+  
+
    
+    Generated by Epydoc 3.0beta1 on Thu Aug  4 00:47:03 2011
+    
+      http://epydoc.sourceforge.net
+    
    
+
+
+  
+
+

ADDED   applications/examples/static/favicon.ico
Index: applications/examples/static/favicon.ico
==================================================================
--- /dev/null
+++ applications/examples/static/favicon.ico
cannot compute difference between binary files

ADDED   applications/examples/static/img/Menu-2.png
Index: applications/examples/static/img/Menu-2.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/Menu-2.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/Stickers1.png
Index: applications/examples/static/img/Stickers1.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/Stickers1.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/Stickers2.png
Index: applications/examples/static/img/Stickers2.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/Stickers2.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/Stickers3.png
Index: applications/examples/static/img/Stickers3.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/Stickers3.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/Stickers4.png
Index: applications/examples/static/img/Stickers4.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/Stickers4.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/Stickers5.png
Index: applications/examples/static/img/Stickers5.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/Stickers5.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/Stickers6.png
Index: applications/examples/static/img/Stickers6.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/Stickers6.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/Stickers7.png
Index: applications/examples/static/img/Stickers7.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/Stickers7.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/Stickers8.png
Index: applications/examples/static/img/Stickers8.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/Stickers8.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/back-02.png
Index: applications/examples/static/img/back-02.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/back-02.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/back-03.png
Index: applications/examples/static/img/back-03.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/back-03.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/back-04.png
Index: applications/examples/static/img/back-04.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/back-04.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/back-05.png
Index: applications/examples/static/img/back-05.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/back-05.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/back-R-02.png
Index: applications/examples/static/img/back-R-02.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/back-R-02.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/demo.png
Index: applications/examples/static/img/demo.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/demo.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/favicon.ico
Index: applications/examples/static/img/favicon.ico
==================================================================
--- /dev/null
+++ applications/examples/static/img/favicon.ico
cannot compute difference between binary files

ADDED   applications/examples/static/img/favicon.png
Index: applications/examples/static/img/favicon.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/favicon.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/gluon.png
Index: applications/examples/static/img/gluon.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/gluon.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/1283521892_my-account.png
Index: applications/examples/static/img/icons/1283521892_my-account.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/1283521892_my-account.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/1283522082_phone.png
Index: applications/examples/static/img/icons/1283522082_phone.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/1283522082_phone.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/1283522094_email.png
Index: applications/examples/static/img/icons/1283522094_email.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/1283522094_email.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/1283522104_sign-up.png
Index: applications/examples/static/img/icons/1283522104_sign-up.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/1283522104_sign-up.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/1283522131_contact.png
Index: applications/examples/static/img/icons/1283522131_contact.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/1283522131_contact.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/1283522158_login.png
Index: applications/examples/static/img/icons/1283522158_login.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/1283522158_login.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/1283522183_twitter.png
Index: applications/examples/static/img/icons/1283522183_twitter.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/1283522183_twitter.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/1283522183_video.png
Index: applications/examples/static/img/icons/1283522183_video.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/1283522183_video.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/1283522207_library.png
Index: applications/examples/static/img/icons/1283522207_library.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/1283522207_library.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/1283522229_cv.png
Index: applications/examples/static/img/icons/1283522229_cv.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/1283522229_cv.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/1283522239_order-2.png
Index: applications/examples/static/img/icons/1283522239_order-2.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/1283522239_order-2.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/1283523038_multi-agents.png
Index: applications/examples/static/img/icons/1283523038_multi-agents.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/1283523038_multi-agents.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/1283523136_chat.png
Index: applications/examples/static/img/icons/1283523136_chat.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/1283523136_chat.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/1283523297_email.png
Index: applications/examples/static/img/icons/1283523297_email.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/1283523297_email.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/1283523332_calculator.png
Index: applications/examples/static/img/icons/1283523332_calculator.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/1283523332_calculator.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/1283523626_search.png
Index: applications/examples/static/img/icons/1283523626_search.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/1283523626_search.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/1283524371_calculator.png
Index: applications/examples/static/img/icons/1283524371_calculator.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/1283524371_calculator.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/1283524386_mobile.png
Index: applications/examples/static/img/icons/1283524386_mobile.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/1283524386_mobile.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/1283524452_cloud-filled.png
Index: applications/examples/static/img/icons/1283524452_cloud-filled.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/1283524452_cloud-filled.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/1283524467_home.png
Index: applications/examples/static/img/icons/1283524467_home.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/1283524467_home.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/1285713038_video32.png
Index: applications/examples/static/img/icons/1285713038_video32.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/1285713038_video32.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/CHAT_32x32-32.png
Index: applications/examples/static/img/icons/CHAT_32x32-32.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/CHAT_32x32-32.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/FILE_32x32-32.png
Index: applications/examples/static/img/icons/FILE_32x32-32.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/FILE_32x32-32.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/FOLDER - DOWNLOAD_32x32-32.png
Index: applications/examples/static/img/icons/FOLDER - DOWNLOAD_32x32-32.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/FOLDER - DOWNLOAD_32x32-32.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/FOLDER - FONTS_32x32-32.png
Index: applications/examples/static/img/icons/FOLDER - FONTS_32x32-32.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/FOLDER - FONTS_32x32-32.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/FOLDER - GAMES_32x32-32.png
Index: applications/examples/static/img/icons/FOLDER - GAMES_32x32-32.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/FOLDER - GAMES_32x32-32.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/FOLDER - INTERNET_32x32-32.png
Index: applications/examples/static/img/icons/FOLDER - INTERNET_32x32-32.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/FOLDER - INTERNET_32x32-32.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/FOLDER - MUSIC_32x32-32.png
Index: applications/examples/static/img/icons/FOLDER - MUSIC_32x32-32.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/FOLDER - MUSIC_32x32-32.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/FOLDER - PICTURES_32x32-32.png
Index: applications/examples/static/img/icons/FOLDER - PICTURES_32x32-32.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/FOLDER - PICTURES_32x32-32.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/FOLDER - PRINTER_32x32-32.png
Index: applications/examples/static/img/icons/FOLDER - PRINTER_32x32-32.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/FOLDER - PRINTER_32x32-32.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/FOLDER_32x32-32.png
Index: applications/examples/static/img/icons/FOLDER_32x32-32.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/FOLDER_32x32-32.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/HELP_32x32-32.png
Index: applications/examples/static/img/icons/HELP_32x32-32.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/HELP_32x32-32.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/NETWORK - FOLDER OPEN_32x32-32.png
Index: applications/examples/static/img/icons/NETWORK - FOLDER OPEN_32x32-32.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/NETWORK - FOLDER OPEN_32x32-32.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/TV_32x32-32.png
Index: applications/examples/static/img/icons/TV_32x32-32.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/TV_32x32-32.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/TWEET DECK_32x32-32.png
Index: applications/examples/static/img/icons/TWEET DECK_32x32-32.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/TWEET DECK_32x32-32.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/_README_ecqlipse.2.png.txt
Index: applications/examples/static/img/icons/_README_ecqlipse.2.png.txt
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/_README_ecqlipse.2.png.txt
@@ -0,0 +1,13 @@
+=== ecqlipse 2 (.PNG) by chrfb ===
+
+The packet contains 116 system and 165 application PNG's in white respectively black colour.
+Icon size: 128x128 plus a separate folder including 48x48, 32x32 and 16x16 pixel.
+
+Please refer to the Creative Commons (CC) on my site if you want to use or modify the icons.
+
+http://chrfb.deviantart.com
+
+Munich, 2010/03
+
+
+

ADDED   applications/examples/static/img/icons/appliances.png
Index: applications/examples/static/img/icons/appliances.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/appliances.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/demo.png
Index: applications/examples/static/img/icons/demo.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/demo.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/examples.png
Index: applications/examples/static/img/icons/examples.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/examples.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/livechat.png
Index: applications/examples/static/img/icons/livechat.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/livechat.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/plugins.png
Index: applications/examples/static/img/icons/plugins.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/plugins.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/slices.png
Index: applications/examples/static/img/icons/slices.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/slices.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/tutorials.png
Index: applications/examples/static/img/icons/tutorials.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/tutorials.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/twitter.png
Index: applications/examples/static/img/icons/twitter.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/twitter.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/usergroups.png
Index: applications/examples/static/img/icons/usergroups.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/usergroups.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/uservoice.png
Index: applications/examples/static/img/icons/uservoice.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/uservoice.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/icons/videos.png
Index: applications/examples/static/img/icons/videos.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/icons/videos.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/logo3Tones.png
Index: applications/examples/static/img/logo3Tones.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/logo3Tones.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/logo_bw.png
Index: applications/examples/static/img/logo_bw.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/logo_bw.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/logo_db.png
Index: applications/examples/static/img/logo_db.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/logo_db.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/logo_lb.png
Index: applications/examples/static/img/logo_lb.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/logo_lb.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/netdow1.png
Index: applications/examples/static/img/netdow1.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/netdow1.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/netdow2.png
Index: applications/examples/static/img/netdow2.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/netdow2.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/netdow3.png
Index: applications/examples/static/img/netdow3.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/netdow3.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/online_book_cover.jpg
Index: applications/examples/static/img/online_book_cover.jpg
==================================================================
--- /dev/null
+++ applications/examples/static/img/online_book_cover.jpg
cannot compute difference between binary files

ADDED   applications/examples/static/img/tipDownloads.png
Index: applications/examples/static/img/tipDownloads.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/tipDownloads.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/tipDownloads2.png
Index: applications/examples/static/img/tipDownloads2.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/tipDownloads2.png
cannot compute difference between binary files

ADDED   applications/examples/static/img/web2py_logo.png
Index: applications/examples/static/img/web2py_logo.png
==================================================================
--- /dev/null
+++ applications/examples/static/img/web2py_logo.png
cannot compute difference between binary files

ADDED   applications/examples/static/js/calendar.js
Index: applications/examples/static/js/calendar.js
==================================================================
--- /dev/null
+++ applications/examples/static/js/calendar.js
cannot compute difference between binary files

ADDED   applications/examples/static/js/jquery.js
Index: applications/examples/static/js/jquery.js
==================================================================
--- /dev/null
+++ applications/examples/static/js/jquery.js
cannot compute difference between binary files

ADDED   applications/examples/static/js/web2py_ajax.js
Index: applications/examples/static/js/web2py_ajax.js
==================================================================
--- /dev/null
+++ applications/examples/static/js/web2py_ajax.js
@@ -0,0 +1,97 @@
+function popup(url) {
+  newwindow=window.open(url,'name','height=400,width=600');
+  if (window.focus) newwindow.focus();
+  return false;
+}
+function collapse(id) { jQuery('#'+id).slideToggle(); }
+function fade(id,value) { if(value>0) jQuery('#'+id).hide().fadeIn('slow'); else jQuery('#'+id).show().fadeOut('slow'); }
+function ajax(u,s,t) {
+    query = '';
+    if (typeof s == "string") {
+        d = jQuery(s).serialize();
+        if(d){ query = d; }
+    } else {
+        pcs = [];
+        for(i=0; i0){query = pcs.join("&");}
+    }
+    jQuery.ajax({type: "POST", url: u, data: query, success: function(msg) { if(t) { if(t==':eval') eval(msg); else jQuery("#" + t).html(msg); } } }); 
+}
+
+String.prototype.reverse = function () { return this.split('').reverse().join('');};
+function web2py_ajax_init() {
+  jQuery('.hidden').hide();
+  jQuery('.error').hide().slideDown('slow');
+  jQuery('.flash').click(function() { jQuery(this).fadeOut('slow'); return false; });
+  // jQuery('input[type=submit]').click(function(){var t=jQuery(this);t.hide();t.after('')});
+  jQuery('input.integer').live('keyup', function(){this.value=this.value.reverse().replace(/[^0-9\-]|\-(?=.)/g,'').reverse();});
+  jQuery('input.double,input.decimal').live('keyup', function(){this.value=this.value.reverse().replace(/[^0-9\-\.,]|[\-](?=.)|[\.,](?=[0-9]*[\.,])/g,'').reverse();});
+  var confirm_message = (typeof w2p_ajax_confirm_message != 'undefined') ? w2p_ajax_confirm_message : "Are you sure you want to delete this object?";
+  jQuery("input[type='checkbox'].delete").live('click', function(){ if(this.checked) if(!confirm(confirm_message)) this.checked=false; });
+  var date_format = (typeof w2p_ajax_date_format != 'undefined') ? w2p_ajax_date_format : "%Y-%m-%d";
+  try {jQuery("input.date").live('focus',function() {Calendar.setup({
+     inputField:this, ifFormat:date_format, showsTime:false
+  }); }); } catch(e) {};
+  var datetime_format = (typeof w2p_ajax_datetime_format != 'undefined') ? w2p_ajax_datetime_format : "%Y-%m-%d %H:%M:%S";
+  try { jQuery("input.datetime").live('focus', function() {Calendar.setup({
+     inputField:this, ifFormat:datetime_format, showsTime: true,timeFormat: "24"
+  }); }); } catch(e) {};
+
+  jQuery("input.time").live('focus', function() { var el = jQuery(this); 
+          if (!el.hasClass('hasTimeEntry')) try { el.timeEntry(); } catch(e) {}; 
+  });
+};
+
+jQuery(function() {   
+   var flash = jQuery('.flash');
+   flash.hide();
+   if(flash.html()) flash.slideDown();
+   web2py_ajax_init();
+});
+function web2py_trap_form(action,target) {
+   jQuery('#'+target+' form').each(function(i){
+      var form=jQuery(this);
+      if(!form.hasClass('no_trap'))
+        form.submit(function(obj){
+         jQuery('.flash').hide().html('');
+         web2py_ajax_page('post',action,form.serialize(),target);
+         return false;
+      });
+   });
+}
+function web2py_ajax_page(method,action,data,target) {
+  jQuery.ajax({'type':method,'url':action,'data':data,
+    'beforeSend':function(xhr) {
+      xhr.setRequestHeader('web2py-component-location',document.location);
+      xhr.setRequestHeader('web2py-component-element',target);},
+    'complete':function(xhr,text){
+      var html=xhr.responseText;
+      var content=xhr.getResponseHeader('web2py-component-content'); 
+      var command=xhr.getResponseHeader('web2py-component-command');
+      var flash=xhr.getResponseHeader('web2py-component-flash');
+      var t = jQuery('#'+target);
+      if(content=='prepend') t.prepend(html); 
+      else if(content=='append') t.append(html);
+      else if(content!='hide') t.html(html);  
+      web2py_trap_form(action,target);
+      web2py_ajax_init();      
+      if(command) eval(command);
+      if(flash) jQuery('.flash').html(flash).slideDown();
+      }
+    });
+}
+function web2py_component(action,target) {
+  jQuery(function(){ web2py_ajax_page('get',action,null,target); });
+}
+function web2py_comet(url,onmessage,onopen,onclose) {
+  if ("WebSocket" in window) {
+    var ws = new WebSocket(url);
+    ws.onopen = onopen?onopen:(function(){});
+    ws.onmessage = onmessage;
+    ws.onclose = onclose?onclose:(function(){});
+    return true; // supported
+  } else return false; // not supported
+}

ADDED   applications/examples/static/kpax.png
Index: applications/examples/static/kpax.png
==================================================================
--- /dev/null
+++ applications/examples/static/kpax.png
cannot compute difference between binary files

ADDED   applications/examples/static/markmin.html
Index: applications/examples/static/markmin.html
==================================================================
--- /dev/null
+++ applications/examples/static/markmin.html
@@ -0,0 +1,41 @@
+
    Markmin markup language
    About
    This is a new markup language that we call markmin designed to produce high quality scientific papers and books and also put them online. We provide serializers for html, latex and pdf. It is implemented in the markmin2html function in the markmin2html.py.
    Example of usage:
    >>> m = "Hello **world** [[link http://web2py.com]]"
+>>> from markmin2html import markmin2html
+>>> print markmin2html(m)
+>>> from markmin2latex import markmin2latex
+>>> print markmin2latex(m)
+>>> from markmin2pdf import markmin2pdf # requires pdflatex
+>>> print markmin2pdf(m)
    Why?
    We wanted a markup language with the following requirements:
    • less than 100 lines of functional code
    • easy to read
    • secure
    • support table, ul, ol, code
    • support html5 video and audio elements (html serialization only)
    • can align images and resize them
    • can specify class for tables and code elements
    • can add anchors
    • does not use _ for markup (since it creates odd behavior)
    • automatically links urls
    • fast
    • easy to extend
    • supports latex and pdf including references
    • allows to describe the markup in the markup (this document is generated from markmin syntax)
    (results depend on text but in average for text ~100K markmin is 30% faster than markdown, for text ~10K it is 10x faster)
    The web2py book published by lulu, for example, was entirely generated with markmin2pdf from the online web2py wiki
    Download
    • http://web2py.googlecode.com/hg/gluon/contrib/markmin/markmin2html.py
    • http://web2py.googlecode.com/hg/gluon/contrib/markmin/markmin2latex.py
    • http://web2py.googlecode.com/hg/gluon/contrib/markmin/markmin2pdf.py
    markmin2html.py and markmin2latex.py are single files and have no web2py dependence. Their license is BSD.
    Examples
    Bold, italic, code and links
    SOURCE                OUTPUT
    # title               title
    ## section            section
    ### subsection        subsection
    **bold**              bold
    ''italic''            italic
    ``verbatim``      verbatim
    http://google.com     http://google.com
    [[click me #myanchor]]click me
    
+
    More on links
    The format is always [[title link]]. Notice you can nest bold, italic and code inside the link title.
    Anchors 
    You can place an anchor anywhere in the text using the syntax [[name]] where name is the name of the anchor.
+You can then link the anchor with link, i.e. [[link #myanchor]].
    Images
    some image
+This paragraph has an image aligned to the right with a width of 200px. Its is placed using the code
    [[some image http://www.web2py.com/examples/static/web2py_logo.png right 200px]].
    Unordered Lists
    - Dog
+- Cat
+- Mouse
    is rendered as
    • Dog
    • Cat
    • Mouse
    Two new lines between items break the list in two lists.
    Ordered Lists
    + Dog
++ Cat
++ Mouse
    is rendered as
    1. Dog
    2. Cat
    3. Mouse
    Tables
    Something like this
+
    ---------
+**A** | **B** | **C**
+0 | 0 | X
+0 | X | 0
+X | 0 | 0
+-----:abc
    
+is a table and is rendered as
+
    ABC
    00X
    0X0
    X00
    Four or more dashes delimit the table and | separates the columns.
+The :abc at the end sets the class for the table and it is optional.
    Blockquote
    A table with a single cell is rendered as a blockquote:
    Hello world
    
+
    Code, <code>, escaping and extra stuff
    def test():
+    return "this is Python code"
    Optionally a ` inside a ``...`` block can be inserted escaped with !`!.
+The :python after the markup is also optional. If present, by default, it is used to set the class of the <code> block.
+The behavior can be overridden by passing an argument extra to the render function. For example:
    >>> markmin2html("``aaa``:custom",
+       extra=dict(custom=lambda text: 'x'+text+'x'))
    generates
    'xaaax'
    (the ``...``:custom block is rendered by the custom=lambda function passed to render).
    Html5 support
    Markmin also supports the <video> and <audio> html5 tags using the notation:
+
    [[title link video]]
+[[title link audio]]
    Latex and other extensions
    Formulas can be embedded into HTML with $$formula$$.
+You can use Google charts to render the formula:
    >>> LATEX = '<img src="http://chart.apis.google.com/chart?cht=tx&chl=%s" align="center"/>'
+>>> markmin2html(text,{'latex':lambda code: LATEX % code.replace('"','"')})
    Code with syntax highlighting
    This requires a syntax highlighting tool, such as the web2py CODE helper.
    >>> extra={'code_cpp':lambda text: CODE(text,language='cpp').xml(),
+           'code_java':lambda text: CODE(text,language='java').xml(),
+           'code_python':lambda text: CODE(text,language='python').xml(),
+           'code_html':lambda text: CODE(text,language='html').xml()}
+>>> markmin2html(text,extra=extra)
    Code can now be marked up as in this example:
    ``
+<html><body>example</body></html>
+``:code_html
    Citations and References
    Citations are treated as internal links in html and proper citations in latex if there is a final section called "References". Items like
    - [[key]] value
    in the References will be translated into Latex
    \bibitem{key} value
    Here is an example of usage:
    As shown in Ref.``mdipierro``:cite
+
+## References
+- [[mdipierro]] web2py Manual, 3rd Edition, lulu.com
    Caveats
    <ul/>, <ol/>, <code/>, <table/>, <blockquote/>, <h1/>, ..., <h6/> do not have <p>...</p> around them.
    

ADDED   applications/examples/static/powered_by/web2py_sticker_3d8799.png
Index: applications/examples/static/powered_by/web2py_sticker_3d8799.png
==================================================================
--- /dev/null
+++ applications/examples/static/powered_by/web2py_sticker_3d8799.png
cannot compute difference between binary files

ADDED   applications/examples/static/powered_by/web2py_sticker_3d9960.png
Index: applications/examples/static/powered_by/web2py_sticker_3d9960.png
==================================================================
--- /dev/null
+++ applications/examples/static/powered_by/web2py_sticker_3d9960.png
cannot compute difference between binary files

ADDED   applications/examples/static/powered_by/web2py_sticker_463d99.png
Index: applications/examples/static/powered_by/web2py_sticker_463d99.png
==================================================================
--- /dev/null
+++ applications/examples/static/powered_by/web2py_sticker_463d99.png
cannot compute difference between binary files

ADDED   applications/examples/static/powered_by/web2py_sticker_73993d.png
Index: applications/examples/static/powered_by/web2py_sticker_73993d.png
==================================================================
--- /dev/null
+++ applications/examples/static/powered_by/web2py_sticker_73993d.png
cannot compute difference between binary files

ADDED   applications/examples/static/powered_by/web2py_sticker_993d3d.png
Index: applications/examples/static/powered_by/web2py_sticker_993d3d.png
==================================================================
--- /dev/null
+++ applications/examples/static/powered_by/web2py_sticker_993d3d.png
cannot compute difference between binary files

ADDED   applications/examples/static/powered_by/web2py_sticker_993d98.png
Index: applications/examples/static/powered_by/web2py_sticker_993d98.png
==================================================================
--- /dev/null
+++ applications/examples/static/powered_by/web2py_sticker_993d98.png
cannot compute difference between binary files

ADDED   applications/examples/static/powered_by/web2py_sticker_996f3d.png
Index: applications/examples/static/powered_by/web2py_sticker_996f3d.png
==================================================================
--- /dev/null
+++ applications/examples/static/powered_by/web2py_sticker_996f3d.png
cannot compute difference between binary files

ADDED   applications/examples/static/powered_by/web2py_sticker_99963d.png
Index: applications/examples/static/powered_by/web2py_sticker_99963d.png
==================================================================
--- /dev/null
+++ applications/examples/static/powered_by/web2py_sticker_99963d.png
cannot compute difference between binary files

ADDED   applications/examples/static/robots.txt
Index: applications/examples/static/robots.txt
==================================================================
--- /dev/null
+++ applications/examples/static/robots.txt
@@ -0,0 +1,4 @@
+User-agent: *
+Disallow: /examples/global/
+Disallow: /welcome
+Disallow: /admin

ADDED   applications/examples/static/title.png
Index: applications/examples/static/title.png
==================================================================
--- /dev/null
+++ applications/examples/static/title.png
cannot compute difference between binary files

ADDED   applications/examples/static/web2py_contributor_agreement.pdf
Index: applications/examples/static/web2py_contributor_agreement.pdf
==================================================================
--- /dev/null
+++ applications/examples/static/web2py_contributor_agreement.pdf
cannot compute difference between binary files

ADDED   applications/examples/static/web2py_logo.png
Index: applications/examples/static/web2py_logo.png
==================================================================
--- /dev/null
+++ applications/examples/static/web2py_logo.png
cannot compute difference between binary files

ADDED   applications/examples/static/web2py_logo_light.png
Index: applications/examples/static/web2py_logo_light.png
==================================================================
--- /dev/null
+++ applications/examples/static/web2py_logo_light.png
cannot compute difference between binary files

ADDED   applications/examples/views/ajax_examples/fade.html
Index: applications/examples/views/ajax_examples/fade.html
==================================================================
--- /dev/null
+++ applications/examples/views/ajax_examples/fade.html
@@ -0,0 +1,8 @@
+{{extend 'layout.html'}}
+
+
    
+
+
+
    
+
+
    {{='Hello World '*100}}
    

ADDED   applications/examples/views/ajax_examples/index.html
Index: applications/examples/views/ajax_examples/index.html
==================================================================
--- /dev/null
+++ applications/examples/views/ajax_examples/index.html
@@ -0,0 +1,12 @@
+{{extend 'layout.html'}}
+
+
    Type something and press the button.
+   The last 10 entries will appear sorted in a table below.
    
+
+
    
+
+
+
    
+
    
+
    

ADDED   applications/examples/views/appadmin.html
Index: applications/examples/views/appadmin.html
==================================================================
--- /dev/null
+++ applications/examples/views/appadmin.html
@@ -0,0 +1,198 @@
+{{extend 'layout.html'}}
+
+
+{{if request.function=='index':}}
+  
    {{=T("Available databases and tables")}}
    
+  {{if not databases:}}{{=T("No databases in this application")}}{{pass}}
+  {{for db in sorted(databases):}}
+    {{for table in databases[db].tables:}}
+      {{qry='%s.%s.id>0'%(db,table)}}
+      {{tbl=databases[db][table]}}
+      {{if hasattr(tbl,'_primarykey'):}}
+        {{if tbl._primarykey:}}
+            {{firstkey=tbl[tbl._primarykey[0]]}}
+            {{if firstkey.type in ['string','text']:}}
+              {{qry='%s.%s.%s!=""'%(db,table,firstkey.name)}}
+            {{else:}}
+              {{qry='%s.%s.%s>0'%(db,table,firstkey.name)}}
+            {{pass}}
+        {{else:}}
+             {{qry=''}}
+             {{pass}}
+      {{pass}}
+      
    {{=A("%s.%s" % (db,table),_href=URL('select',args=[db],vars=dict(query=qry)))}}
+
    
+      [ {{=A(str(T('insert new'))+' '+table,_href=URL('insert',args=[db,table]))}} ]
+    

    
+    {{pass}}
+  {{pass}}
+
+{{elif request.function=='select':}}
+  
    {{=XML(str(T("database %s select"))%A(request.args[0],_href=URL('index'))) }}
+  
    
+   {{if table:}}
+  [ {{=A(str(T('insert new %s'))%table,_href=URL('insert',args=[request.args[0],table]))}} ]

    
+    
    {{=T("Rows in table")}}

    
+   {{else:}}
+    
    {{=T("Rows selected")}}

    
+   {{pass}}
+   {{=form}}
+   
    {{=T('The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.')}}
    
+      {{=T('Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.')}}
    
+      {{=T('"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN')}}
    
+    

    
+    
    {{=nrows}} {{=T("selected")}}
    
+    {{if start>0:}}[ {{=A(T('previous 100 rows'),_href=URL('select',args=request.args[0],vars=dict(start=start-100)))}} ]{{pass}}
+    {{if stop
+       {{linkto=URL('update',args=request.args[0])}}
+       {{upload=URL('download',args=request.args[0])}}    
+       {{=SQLTABLE(rows,linkto,upload,orderby=True,_class='sortable')}}
+       
+    {{pass}}
+    

    {{=T("Import/Export")}}

    
+    [ {{=T("export as csv file")}} ]
+  {{if table:}}
+    {{=FORM(str(T('or import from csv file'))+" ",INPUT(_type='file',_name='csvfile'),INPUT(_type='hidden',_value=table,_name='table'),INPUT(_type='submit',_value='import'))}}
+  {{pass}}
+
+
+{{elif request.function=='insert':}}  
+  
    {{=T("database")}} {{=A(request.args[0],_href=URL('index'))}}
+    {{if hasattr(table,'_primarykey'):}}
+      {{fieldname=table._primarykey[0]}}
+      {{dbname=request.args[0]}}
+      {{tablename=request.args[1]}}
+      {{cond = table[fieldname].type in ['string','text'] and '!=""' or '>0'}}
+      {{=T("table")}} {{=A(tablename,_href=URL('select',args=dbname,vars=dict(query='%s.%s.%s%s'%(dbname,tablename,fieldname,cond))))}}
+    {{else:}}  
+      {{=T("table")}} {{=A(request.args[1],_href=URL('select',args=request.args[0],vars=dict(query='%s.%s.id>0'%tuple(request.args[:2]))))}}
+    {{pass}}
+  
    
+  
    {{=T("New Record")}}

    
+  {{=form}}
+
+
+
+{{elif request.function=='update':}}
+  
    {{=T("database")}} {{=A(request.args[0],_href=URL('index'))}}
+    {{if hasattr(table,'_primarykey'):}}
+      {{fieldname=request.vars.keys()[0]}}
+      {{dbname=request.args[0]}}
+      {{tablename=request.args[1]}}
+      {{cond = table[fieldname].type in ['string','text'] and '!=""' or '>0'}}      
+      {{=T("table")}} {{=A(tablename,_href=URL('select',args=dbname,vars=dict(query='%s.%s.%s%s'%(dbname,tablename,fieldname,cond))))}}
+      {{=T("record")}} {{=A('%s=%s'%request.vars.items()[0],_href=URL('update',args=request.args[:2],vars=request.vars))}}
+    {{else:}}
+      {{=T("table")}} {{=A(request.args[1],_href=URL('select',args=request.args[0],vars=dict(query='%s.%s.id>0'%tuple(request.args[:2]))))}}
+      {{=T("record id")}} {{=A(request.args[2],_href=URL('update',args=request.args[:3]))}}
+    {{pass}}
+  
    
+  
    {{=T("Edit current record")}}


    {{=form}}
+
+
+
+{{elif request.function=='state':}}
+  
    {{=T("Internal State")}}
    
+  
    {{=T("Current request")}}
    
+  {{=BEAUTIFY(request)}}
+  
    {{=T("Current response")}}
    
+  {{=BEAUTIFY(response)}}
+  
    {{=T("Current session")}}
    
+  {{=BEAUTIFY(session)}}
+
+
+{{elif request.function == 'ccache':}}
+
    Cache
    
+
    
+
    
+    
    
+        Statistics
+    
    
+    
    
+        
    Overview
    
+        
    
+            Hit Ratio: 
+            {{=total['ratio']}}% 
+            ({{=total['hits']}} hits 
+            and {{=total['misses']}} misses)
+        
    
+        
    
+            Size of cache: 
+            {{=total['objects']}} items, 
+            {{=total['bytes']}} bytes 
+            {{if total['bytes'] > 524287:}}
+                ({{="%.0d" % (total['bytes'] / 1048576)}} MB)
+            {{pass}}
+        
    
+        
    
+            Cache contains items up to 
+            {{="%02d" % total['oldest'][0]}} hours 
+            {{="%02d" % total['oldest'][1]}} minutes 
+            {{="%02d" % total['oldest'][2]}} seconds old.
+        
    
+        
    RAM
    
+        
    
+            Hit Ratio: 
+            {{=ram['ratio']}}% 
+            ({{=ram['hits']}} hits 
+            and {{=ram['misses']}} misses)
+        
    
+        
    
+            Size of cache: 
+            {{=ram['objects']}} items, 
+            {{=ram['bytes']}} bytes 
+            {{if ram['bytes'] > 524287:}}
+                ({{=ram['bytes'] / 1048576}} MB)
+            {{pass}}
+        
    
+        
    
+            RAM contains items up to 
+            {{="%02d" % ram['oldest'][0]}} hours 
+            {{="%02d" % ram['oldest'][1]}} minutes 
+            {{="%02d" % ram['oldest'][2]}} seconds old.
+        
    
+        
    DISK
    
+        
    
+            Hit Ratio: 
+            {{=disk['ratio']}}% 
+            ({{=disk['hits']}} hits 
+            and {{=disk['misses']}} misses)
+        
    
+        
    
+            Size of cache: 
+            {{=disk['objects']}} items, 
+            {{=disk['bytes']}} bytes 
+            {{if disk['bytes'] > 524287:}}
+                ({{=disk['bytes'] / 1048576}} MB)
+            {{pass}}
+        
    
+        
    
+            DISK contains items up to 
+            {{="%02d" % disk['oldest'][0]}} hours 
+            {{="%02d" % disk['oldest'][1]}} minutes 
+            {{="%02d" % disk['oldest'][2]}} seconds old.
+        
    
+    
    
+    
+    
    
+    Manage Cache
+    
    
+    
    
+    
    
+        {{=form}}
+    
    
+    
    
+
    
+
    
+
    
+{{pass}}

ADDED   applications/examples/views/database_examples/buy.html
Index: applications/examples/views/database_examples/buy.html
==================================================================
--- /dev/null
+++ applications/examples/views/database_examples/buy.html
@@ -0,0 +1,7 @@
+{{extend 'layout_examples/layout_civilized.html'}}
+  
    Purchase form
    
+  {{=form}}
+  [ {{=A('reset purchased',_href=URL('reset_purchased'))}} |
+    {{=A('delete purchased',_href=URL('delete_purchased'))}} ]
     
+  
    Current purchases (SQL JOIN!)
    
+
    {{=records}}
    

ADDED   applications/examples/views/database_examples/register_dog.html
Index: applications/examples/views/database_examples/register_dog.html
==================================================================
--- /dev/null
+++ applications/examples/views/database_examples/register_dog.html
@@ -0,0 +1,6 @@
+{{extend 'layout_examples/layout_civilized.html'}}
+
+
    Dog registration form
    
+{{=form}}
+
    Current dogs
    
+{{=records}}

ADDED   applications/examples/views/database_examples/register_product.html
Index: applications/examples/views/database_examples/register_product.html
==================================================================
--- /dev/null
+++ applications/examples/views/database_examples/register_product.html
@@ -0,0 +1,6 @@
+{{extend 'layout_examples/layout_civilized.html'}}
+
+
    Product registration form
    
+{{=form}}
+
    Current products
    
+{{=records}}

ADDED   applications/examples/views/database_examples/register_user.html
Index: applications/examples/views/database_examples/register_user.html
==================================================================
--- /dev/null
+++ applications/examples/views/database_examples/register_user.html
@@ -0,0 +1,6 @@
+{{extend 'layout_examples/layout_civilized.html'}}
+
+
    User registration form
    
+{{=form}}
+
    Current users
    
+{{=records}}

ADDED   applications/examples/views/default/changelog.html
Index: applications/examples/views/default/changelog.html
==================================================================
--- /dev/null
+++ applications/examples/views/default/changelog.html
@@ -0,0 +1,5 @@
+{{extend 'layout.html'}}
+
+
    
+  {{=changelog}}
+
    

ADDED   applications/examples/views/default/documentation.html
Index: applications/examples/views/default/documentation.html
==================================================================
--- /dev/null
+++ applications/examples/views/default/documentation.html
@@ -0,0 +1,18 @@
+{{extend 'layout.html'}}
+
+
    
+    
    
+        {{=get_content('main')}}
+    
    
+    
    
+         {{=get_content('official')}}
+    
    
+    
    
+         {{=get_content('community')}}
+    
    
+  
    
+         {{=get_content('more')}}
+    
    
+
    
+
+    

ADDED   applications/examples/views/default/download.html
Index: applications/examples/views/default/download.html
==================================================================
--- /dev/null
+++ applications/examples/views/default/download.html
@@ -0,0 +1,100 @@
+{{response.files.append(URL('static','css/artwork.css'))}}
+{{extend 'layout.html'}}
+{{import os}}
+{{version = request.env.web2py_version.split('(')}}
+
    
+  
    web2pyTM Download
    
+  
    
+    
    
+      
+	
+	  
+	  
+	  
+	
+	
+	  
+	  
+	  
+	
+      
    Current (for everybody)
    {{=version[0]}}
    ({{=version[1]}}    		Nightly Built (for testers)Trunk (for developers)
    
+	    
+	  
+	    
+	  
+	    
+	  
    
+    
    
+    
    
+      The source code version works on all supported platforms, including Linux, but it requires Python 2.4, 2.5, 2.6, or 2.7. 
+      It runs on Windows and most Unix systems, including Linux and BSD.
+    
        
+  
    
+
+  
    Instructions
    
+  
    After download, unzip it and click on web2py.exe (windows) or web2py.app (osx).
+    To run from source type:
    
+  {{=CODE("python2.5 web2py.py",language=None,counter='>',_class='boxCode')}}
+  
    or for more info type:
    
+  {{=CODE("python2.5 web2py.py -h",language=None,counter='>',_class='boxCode')}}
+  
+  
+  
    Caveats
    
+  
    After installation, every time you run it, web2py asks you to choose a password. This password is your administrative password. If the password is left blank, the administrative interface is disabled. The administrative interface /admin/default/index is only accessible via localhost and always requires a password.
    Any url /a/b/c maps into a call to application a, controller b.py and function c in that controller.
    You are strongly advised to also use Apache with mod_proxy or mod_wsgi to access applications in the framework. This allows better security and concurrency.
    
+  
+  
    License
    
+  
    Web2py code is released under LGPLv3 License. This license does not extend to third party libraries distributed with web2py (which can be MIT, BSD or Apache type licenses) nor does it extend to applications built with web2py (under the terms of the LGPL.
    
+  
    Applications built with web2py can be released under any license the author wishes as long they do not contain web2py code. They can link unmodified web2py libraries and they can be distributed with official web2py binaries. In particular web2py applications can be distributed in closed source. The admin interface provides a button to byte-code compile.
    
+  
    It is fine to distribute web2py (source or compiled) with your applications as long as you make it clear in the license where your application ends and web2py starts.
    
+  
    web2py is copyrighted by Massimo Di Pierro. The web2py trademark is owned by Massimo Di Pierro.
    
+  [read more]
+  
+  
    Applications
    
+  
    You can find many free and ready to use web2py applications with source code here.
+    
    
+      
    
+      
    
+	web2py artwork  
+	
+	
+	
+      
    
+      
    
+	Stickers  
+	
+	  
+	 
+	 
+	 
+	 
+	 
+      
    
+      Download WEB2PY artwork pack in editable .png format
+    
      
+    
+    
    
+   
+    Logo, Stickers and Layout developed by José V. Sousa and Bruno Rocha (at Blouweb) All rights reserved by  Massimo Di Pierro © 2010
+    
    
+    Favicon and HTML5 compatibility  by Martin Mulone
+    
    
+    Icon set made by Christian Burprich licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 License
+    
    
+
    
+{{block sidebar}}{{end}}
+{{block leftbadges}}{{end}}

ADDED   applications/examples/views/default/examples.html
Index: applications/examples/views/default/examples.html
==================================================================
--- /dev/null
+++ applications/examples/views/default/examples.html
@@ -0,0 +1,685 @@
+{{extend 'layout.html'}} 
+{{import os}}
+
+
    
+  
    web2pyTM Examples
    
+  
+  
    
+    
+    
    Simple Examples
    
+    
+    
    Here are some working and complete examples that explain the basic syntax of the framework.
    
+    You can click on the web2py keywords (in the highlighted code!) to get documentation.
    
+
+    
    Example {{c=1}}{{=c}}{{c+=1}}
    In controller: simple_examples.py
+    {{=CODE("""
+    def hello1():
+        return "Hello World"
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+
+    
    If the controller function returns a string, that is the body of the rendered page.
    Try it here: hello1
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: simple_examples.py
+    {{=CODE("""
+    def hello2():
+        return T("Hello World")
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+
+    
    The function T() marks strings that need to be translated. Translation dictionaries can be created at /admin/default/design
    Try it here: hello2
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: simple_examples.py
+    {{=CODE("""
+    def hello3():
+        return dict(message=T("Hello World"))
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+
+    and view: simple_examples/hello3.html
+    {{=CODE(open(os.path.join(request.folder,'views/simple_examples/hello3.html'),'r').read(),language='html',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    If you return a dictionary, the variables defined in the dictionery are visible to the view (template).
+    
    Try it here: hello3
    
+
+    
    Actions can also be be rendered in other formsts like JSON, hello3.json, and XML, hello3.xml
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: simple_examples.py
+    {{=CODE("""
+    def hello4():
+        response.view='simple_examples/hello3.html'
+        return dict(message=T("Hello World"))
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    You can change the view, but the default is /[controller]/[function].html. If the default is not found web2py tries to render the page using the generic.html view.
+    
    Try it here: hello4
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: simple_examples.py
+    {{=CODE("""
+    def hello5():
+        return HTML(BODY(H1(T('Hello World'),_style="color: red;"))).xml() # .xml to serialize
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    You can also generate HTML using helper objects HTML, BODY, H1, etc. Each of these tags is a class and the views know how to render the corresponding objects. The method .xml() serializes them and produce html/xml code for the page.
+    Each tag, DIV for example, takes three types of arguments:
    
+    
      
+    
    • unnamed arguments, they correspond to nested tags
      • 
+    
    • named arguments and name starts with '_'. These are mapped blindly into tag attributes and the '_' is removed. attributes without value like "READONLY" can be created with the argument "_readonly=ON".
      • 
+    
    • named arguments and name does not start with '_'. They have a special meaning. See "value=" for INPUT, TEXTAREA, SELECT tags later.
+    
    
+    
    Try it here: hello5
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: simple_examples.py
+    {{=CODE("""
+    def hello6():
+        response.flash=T("Hello World in a flash!")
+        return dict(message=T("Hello World"))
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+
+    
    response.flash allows you to flash a message to the user when the page is returned. Use session.flash instead of response.flash to display a message after redirection. With default layout, you can click on the flash to make it disappear.
+    
    Try it here: hello6
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: simple_examples.py
+    {{=CODE("""
+    def status():
+        return dict(request=request,session=session,response=response)
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    Here we are showing the request, session and response objects using the generic.html template.
+    
    Try it here: status
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: simple_examples.py
+    {{=CODE("""
+    def redirectme():
+        redirect(URL('hello3'))
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    You can do redirect.
+    
    Try it here: redirectme
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: simple_examples.py
+    {{=CODE("""
+    def raisehttp():
+        raise HTTP(400,"internal error")
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    You can raise HTTP exceptions to return an error page.
+    
    Try it here: raisehttp
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: simple_examples.py
+    {{=CODE("""
+    def raiseexception():
+        1/0
+        return 'oops'
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    If an exception occurs (other than HTTP) a ticket is generated and the event is logged for the administrator. These tickets and logs can be accessed, reviewed and deleted at any later time.
+    
    Try it here: raiseexception
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: simple_examples.py
+    {{=CODE("""
+    def servejs():
+        import gluon.contenttype
+        response.headers['Content-Type']=gluon.contenttype.contenttype('.js')
+        return 'alert("This is a Javascript document, it is not supposed to run!");'
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    You can serve other than HTML pages by changing the contenttype via the response.headers. The gluon.contenttype module can help you figure the type of the file to be served. NOTICE: this is not necessary for static files unless you want to require authorization.
+    
    Try it here: servejs
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: simple_examples.py
+    {{=CODE("""
+    def makejson():
+        return response.json(['foo', {'bar': ('baz', None, 1.0, 2)}])
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    If you are into Ajax, web2py includes gluon.contrib.simplejson, developed by Bob Ippolito. This module provides a fast and easy way to serve asynchronous content to your Ajax page. gluon.simplesjson.dumps(...) can serialize most Python types into JSON. gluon.contrib.simplejson.loads(...) performs the reverse operation.
+    
    Try it here: makejson
    
+
+    
    New in web2py 1.63: Any normal action returning a dict is automatically serialized in JSON if '.json' is appended to the URL.
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: simple_examples.py
+    {{=CODE("""
+    def makertf():
+        import gluon.contrib.pyrtf as q
+        doc=q.Document()
+        section=q.Section()
+        doc.Sections.append(section)
+        section.append('Section Title')
+        section.append('web2py is great. '*100)
+        response.headers['Content-Type']='text/rtf'
+        return q.dumps(doc)
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    web2py also includes gluon.contrib.pyrtf, developed by Simon Cusack and revised by Grant Edwards. This module allows you to generate Rich Text Format documents including colored formatted text and pictures.
    Try it here: makertf
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: simple_examples.py
+    {{=CODE("""
+    def rss_aggregator():
+        import datetime
+        import gluon.contrib.rss2 as rss2
+        import gluon.contrib.feedparser as feedparser
+        d = feedparser.parse("http://rss.slashdot.org/Slashdot/slashdot/to")
+
+        rss = rss2.RSS2(title=d.channel.title,
+           link = d.channel.link,
+           description = d.channel.description,
+           lastBuildDate = datetime.datetime.now(),
+           items = [
+              rss2.RSSItem(
+                title = entry.title,
+                link = entry.link,
+                description = entry.description,
+                # guid = rss2.Guid('unkown'),
+                pubDate = datetime.datetime.now()) for entry in d.entries]
+           )
+        response.headers['Content-Type']='application/rss+xml'
+        return rss2.dumps(rss)
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    web2py includes gluon.contrib.rss2, developed by Dalke Scientific Software, which generates RSS2 feeds, and
+    gluon.contrib.feedparser, developed by Mark Pilgrim, which collects RSS and ATOM feeds. The above controller collects a slashdot feed and makes new one.
+    
    Try it here: rss_aggregator
    
+
+
+    
    Example {{=c}}{{c+=1}}
    In controller: simple_examples.py
+    {{=CODE("""
+    def ajaxwiki():
+        form=FORM(TEXTAREA(_id='text',_name='text'),
+                 INPUT(_type='button',_value='markmin',
+                       _onclick="ajax('ajaxwiki_onclick',['text'],'html')"))
+        return dict(form=form,html=DIV(_id='html'))
+
+    def ajaxwiki_onclick():
+        return MARKMIN(request.vars.text).xml()
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    The markmin wiki markup is described here.
+    web2py also includes gluon.contrib.markdown.WIKI helper (markdown2) which converts WIKI markup to HTML following this syntax. In this example we added a fancy ajax effect.
    Try it here: ajaxwiki
    
+
+    
    Session Examples
    
+
+
+    
    Example {{=c}}{{c+=1}}
    In controller: session_examples.py 
+    {{=CODE("""
+    def counter():
+        if not session.counter: session.counter=0
+        session.counter+=1
+        return dict(counter=session.counter)
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}and view: session_examples/counter.html
+    {{=CODE(open(os.path.join(request.folder,'views/session_examples/counter.html'),'r').read(),language='html',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    Click to count. The session.counter is persistent for this user and application. Every applicaiton within the system has its own separate session management.
+    
    Try it here: counter
    
+
+    
    Template Examples
    
+
+
+    
    Example {{=c}}{{c+=1}}
    In controller: template_examples.py
+    {{=CODE("""
+    def variables(): return dict(a=10, b=20)
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}and view: template_examples/variables.html
+    {{=CODE(open(os.path.join(request.folder,'views/template_examples/variables.html'),'r').read(),language='html',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    A view (also known as template) is just an HTML file with {{...}} tags. You can put ANY python code into the tags, no need to indent but you must use pass to close blocks. The view is transformed into a python code and then executed. {{=a}} prints a.xml() or escape(str(a)).
+    
    Try it here: variables
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: template_examples.py 
+    {{=CODE("""
+    def test_for(): return dict()
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}and view: template_examples/test_for.html
+    {{=CODE(open(os.path.join(request.folder,'views/template_examples/test_for.html'),'r').read(),language='html',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    You can do for and while loops.
+    
    Try it here: test_for
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: template_examples.py 
+    {{=CODE("""
+    def test_if(): return dict()
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}and view: template_examples/test_if.html
+    {{=CODE(open(os.path.join(request.folder,'views/template_examples/test_if.html'),'r').read(),language='html',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    You can do if, elif, else.
+    
    Try it here: test_if
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: template_examples.py 
+    {{=CODE("""
+    def test_try(): return dict()
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}and view: template_examples/test_try.html
+    {{=CODE(open(os.path.join(request.folder,'views/template_examples/test_try.html'),'r').read(),language='html',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    You can do try, except, finally.
+    
    Try it here: test_try
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: template_examples.py 
+    {{=CODE("""
+    def test_def(): return dict()
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}and view: template_examples/test_def.html
+    {{=CODE(open(os.path.join(request.folder,'views/template_examples/test_def.html'),'r').read(),language='html',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    You can write functions in HTML too.
+    
    Try it here: test_def
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: template_examples.py 
+    {{=CODE("""
+    def escape(): return dict(message='
    text is escaped
    ')
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}and view: template_examples/escape.html
+    {{=CODE(open(os.path.join(request.folder,'views/template_examples/escape.html'),'r').read(),language='html',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    The argument of  {{=...}} is always escaped unless it is an object with a .xml() method such as link, A(...), a FORM(...), a XML(...) block, etc.
+    
    Try it here: escape
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: template_examples.py 
+    {{=CODE("""
+    def xml():
+        return dict(message=XML('
    text is not escaped
    '))
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}and view: template_examples/xml.html
+    {{=CODE(open(os.path.join(request.folder,'views/template_examples/xml.html'),'r').read(),language='html',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    If you do not want to escape the argument of  {{=...}} mark it as XML.
+    
    Try it here: xml
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: template_examples.py 
+    {{=CODE("""
+    def beautify(): return dict(message=BEAUTIFY(request))
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}and view: template_examples/beautify.html
+    {{=CODE(open(os.path.join(request.folder,'views/template_examples/beautify.html'),'r').read(),language='html',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    You can use BEAUTIFY to turn lists and dictionaries into organized HTML.
+    
    Try it here: beautify
    
+
+    
    Layout Examples
    
+
+
+    
    Example {{=c}}{{c+=1}}
    In controller: layout_examples.py 
+    {{=CODE("""
+    def civilized():
+        response.menu=[['civilized',True,URL('civilized')],
+                       ['slick',False,URL('slick')],
+                       ['basic',False,URL('basic')]]
+        response.flash='you clicked on civilized'
+        return dict(message="you clicked on civilized")
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}and view: layout_examples/civilized.html
+    {{=CODE(open(os.path.join(request.folder,'views/layout_examples/civilized.html'),'r').read(),language='html',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    You can specify the layout file at the top of your view. civilized Layout file is a view that somewhere in the body contains {{include}}.
+    
    Try it here: civilized
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: layout_examples.py 
+    {{=CODE("""
+    def slick():
+        response.menu=[['civilized',False,URL('civilized')],
+                       ['slick',True,URL('slick')],
+                       ['basic',False,URL('basic')]]
+        response.flash='you clicked on slick'
+        return dict(message="you clicked on slick")
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}and view: layout_examples/slick.html
+    {{=CODE(open(os.path.join(request.folder,'views/layout_examples/slick.html'),'r').read(),language='html',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    Same here, but using a different template.
    Try it here: slick
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: layout_examples.py 
+    {{=CODE("""
+    def basic():
+        response.menu=[['civilized',False,URL('civilized')],
+                       ['slick',False,URL('slick')],
+                       ['basic',True,URL('basic')]]
+        response.flash='you clicked on basic'
+        return dict(message="you clicked on basic")
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}and view: layout_examples/basic.html
+    {{=CODE(open(os.path.join(request.folder,'views/layout_examples/basic.html'),'r').read(),language='html',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    'layout.html' is the default template, every application has a copy of it.
+    
    Try it here: basic
    
+
+    
    Form Examples
    
+
+
+    
    Example {{=c}}{{c+=1}}
    In controller: form_examples.py
+    {{=CODE("""
+    def form():
+        form=FORM(TABLE(TR("Your name:",INPUT(_type="text",_name="name",requires=IS_NOT_EMPTY())),
+                        TR("Your email:",INPUT(_type="text",_name="email",requires=IS_EMAIL())),
+                        TR("Admin",INPUT(_type="checkbox",_name="admin")),
+                        TR("Sure?",SELECT('yes','no',_name="sure",requires=IS_IN_SET(['yes','no']))),
+                        TR("Profile",TEXTAREA(_name="profile",value="write something here")),
+                        TR("",INPUT(_type="submit",_value="SUBMIT"))))
+        if form.accepts(request,session):
+            response.flash="form accepted"
+        elif form.errors:
+            response.flash="form is invalid"
+        else:
+            response.flash="please fill the form"
+        return dict(form=form,vars=form.vars)
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    You can use HTML helpers like FORM, INPUT, TEXTAREA, OPTION, SELECT to build forms. The "value=" attribute sets the initial value of the field (works for TEXTAREA and OPTION/SELECT too) and the requires attribute sets the validators.
+    FORM.accepts(..) tries to validate the form and, on success, stores vars into form.vars. On failure the error messages are stored into form.errors and shown in the form.
+    
    Try it here: form
    
+
+    
    Database Examples
    
+
+    
    You can find more examples of the web2py Database Abstraction Layer here
    
+
+    
    Let's create a simple model with users, dogs, products and purchases (the database of an animal store). Users can have many dogs (ONE TO MANY), can buy many products and every product can have many buyers (MANY TO MANY).
    
+
+    
    Example {{=c}}{{c+=1}}
    in model: db.py
+    {{=CODE("""
+    db=DAL('sqlite://storage.db')
+
+    db.define_table('users',
+                    Field('name'),
+                    Field('email'))
+
+    # ONE (users) TO MANY (dogs)
+    db.define_table('dogs',
+                    Field('owner_id',db.users),
+                    Field('name'),                
+                    Field('type'),
+                    Field('vaccinated','boolean',default=False),
+                    Field('picture','upload',default=''))
+
+    db.define_table('products',
+                    Field('name'),
+                    Field('description','text'))
+
+    # MANY (users) TO MANY (products)
+    db.define_table('purchases',
+                    Field('buyer_id',db.users),
+                    Field('product_id',db.products),
+                    Field('quantity','integer'))
+
+    purchased=((db.users.id==db.purchases.buyer_id)&(db.products.id==db.purchases.product_id))
+
+    db.users.name.requires=IS_NOT_EMPTY()
+    db.users.email.requires=[IS_EMAIL(), IS_NOT_IN_DB(db,'users.email')]
+    db.dogs.owner_id.requires=IS_IN_DB(db,'users.id','users.name')
+    db.dogs.name.requires=IS_NOT_EMPTY()
+    db.dogs.type.requires=IS_IN_SET(['small','medium','large'])
+    db.purchases.buyer_id.requires=IS_IN_DB(db,'users.id','users.name')
+    db.purchases.product_id.requires=IS_IN_DB(db,'products.id','products.name')
+    db.purchases.quantity.requires=IS_INT_IN_RANGE(0,10)
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    
+    Tables are created if they do not exist (try... except).
+    Here "purchased" is an SQLQuery object, "db(purchased)" would be a SQLSet objects. A SQLSet object can be selected, updated, deleted. SQLSets can also be intersected. Allowed field types are string, integer, password, text, blob, upload, date, time, datetime, references(*), and id(*). The id field is there by default and must not be declared. references are for one to many and many to many as in the example above. For strings you should specify a length or you get length=32.

    
+    You can use db.tablename.fieldname.requires= to set restrictions on the field values. These restrictions are automatically converted into widgets when generating forms from the table with SQLFORM(db.tablename).
+    

    
+    define_tables creates the table and attempts a migration if table has changed or if database name has changed since last time. If you know you already have the table in the database and you do not want to attempt a migration add one last argument to define_table migrate=False.
    
+
+
+    
    Example {{=c}}{{c+=1}}
    In controller: database_examples.py 
+    {{=CODE("""
+    response.menu=[['Register User',False,URL('register_user')],
+                   ['Register Dog',False,URL('register_dog')],
+                   ['Register Product',False,URL('register_product')],
+                   ['Buy product',False,URL('buy')]]
+
+    def register_user():
+        ### create an insert form from the table
+        form=SQLFORM(db.users)
+        ### if form is correct, perform the insert
+        if form.accepts(request,session):
+            response.flash='new record inserted'
+        ### and get a list of all users
+        records=SQLTABLE(db().select(db.users.ALL))
+        return dict(form=form,records=records)
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}and view: database_examples/register_user.html
+    {{=CODE(open(os.path.join(request.folder,'views/database_examples/register_user.html'),'r').read(),language='html',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    This is a simple user registration form. SQLFORM takes a table and returns the corresponding entry form with validators, etc. SQLFORM.accepts is similar to FORM.accepts but, if form is validated, the corresponding insert is also performed. SQLFORM can also do update and edit if a record is passed as its second argument.
+    SQLTABLE instead turns a set of records (result of a select) into an HTML table with links as specified by its optional parameters.
+    The response.menu on top is just a variable used by the layout to make the navigation menu for all functions in this controller.
    
+    Try it here: register_user
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: database_examples.py 
+    {{=CODE("""
+    def register_dog():
+        form=SQLFORM(db.dogs)
+        if form.accepts(request,session):
+            response.flash='new record inserted'
+        download=URL('download') # to see the picture
+        records=SQLTABLE(db().select(db.dogs.ALL),upload=download)
+        return dict(form=form,records=records)
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}and view: database_examples/register_dog.html
+    {{=CODE(open(os.path.join(request.folder,'views/database_examples/register_dog.html'),'r').read(),language='html',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    Here is a dog registration form. Notice that the "image" (type "upload") field is rendered into a <INPUT type="file"> html tag. SQLFORM.accepts(...) handles the upload of the file into the uploads/ folder.
+    
    Try it here: register_dog
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: database_examples.py 
+    {{=CODE("""
+    def register_product():
+        form=SQLFORM(db.products)
+        if form.accepts(request,session):
+            response.flash='new record inserted'
+        records=SQLTABLE(db().select(db.products.ALL))
+        return dict(form=form,records=records)
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}and view: database_examples/register_product.html
+    {{=CODE(open(os.path.join(request.folder,'views/database_examples/register_product.html'),'r').read(),language='html',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    Nothing new here.
+    
    Try it here: register_product
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: database_examples.py 
+    {{=CODE("""
+    def buy():
+        form=FORM(TABLE(TR("Buyer id:",INPUT(_type="text",_name="buyer_id",requires=IS_NOT_EMPTY())),
+               TR("Product id:",INPUT(_type="text",_name="product_id",requires=IS_NOT_EMPTY())),
+               TR("Quantity:",INPUT(_type="text",_name="quantity",requires=IS_INT_IN_RANGE(1,100))),
+               TR("",INPUT(_type="submit",_value="Order"))))
+        if form.accepts(request,session):
+            ### check if user is in the database
+            if len(db(db.users.id==form.vars.buyer_id).select())==0:
+                form.errors.buyer_id="buyer not in database"
+            ### check if product is in the database
+            if len(db(db.products.id==form.vars.product_id).select())==0:
+                form.errors.product_id="product not in database"
+            ### if no errors
+            if len(form.errors)==0:
+                ### get a list of same purchases by same user
+                purchases=db((db.purchases.buyer_id==form.vars.buyer_id)&
+                             (db.purchases.product_id==form.vars.product_id)).select()
+                ### if list contains a record, update that record
+                if len(purchases)>0:
+                    purchases[0].update_record(quantity=purchases[0].quantity+form.vars.quantity)
+                ### or insert a new record in table
+                else:
+                    db.purchases.insert(buyer_id=form.vars.buyer_id,
+                                        product_id=form.vars.product_id,
+                                        quantity=form.vars.quantity)
+                response.flash="product purchased!"
+        if len(form.errors): response.flash="invalid valus in form!"
+        ### now get a list of all purchases
+        records=db(purchased).select(db.users.name,db.purchases.quantity,db.products.name)
+        return dict(form=form,records=SQLTABLE(records),vars=form.vars,vars2=request.vars)
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}and view: database_examples/buy.html
+    {{=CODE(open(os.path.join(request.folder,'views/database_examples/buy.html'),'r').read(),language='html',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    Here is a rather sophisticated buy form. It checks that the buyer and the product are in the database and updates the corresponding record or inserts a new purchase. It also does a JOIN to list all purchases.
+    
    Try it here: buy
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: database_examples.py
+    {{=CODE("""
+    def delete_purchased():
+        db(db.purchases.id>0).delete()
+        redirect(URL('buy'))
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}Try it here: delete_purchased 
+
+    
    Example {{=c}}{{c+=1}}
    In controller: database_examples.py
+    {{=CODE("""
+    def reset_purchased():
+        db(db.purchases.id>0).update(quantity=0)
+        redirect(URL('buy'))
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    This is an update on an SQLSet. (db.purchase.id>0 identifies the set containing only table db.purchases.)
+    
    Try it here: reset_purchased
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: database_examples.py
+    {{=CODE("""
+    def download():
+        return response.download(request,db)
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    This controller allows users to download the uploaded pictures of the dogs.
+    Remember the upload=URL(...'download'...) statement in the register_dog function. Notice that in the URL path /application/controller/function/a/b/etc a, b, etc are passed to the controller as request.args[0], request.args[1], etc. Since the URL is validated request.args[] always contain valid filenames and no '~' or '..' etc. This is useful to allow visitors to link uploaded files.
    
+
+    
    Cache Examples
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: cache_examples.py 
+    {{=CODE("""
+    def cache_in_ram():
+        import time
+        t=cache.ram('time',lambda:time.ctime(),time_expire=5)
+        return dict(time=t,link=A('click to reload',_href=URL(r=request)))
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    The output of lambda:time.ctime() is cached in ram for 5 seconds. The string 'time' is used as cache key. 
+    
    Try it here: cache_in_ram
    
+
+
+    
    Example {{=c}}{{c+=1}}
    In controller: cache_examples.py 
+    {{=CODE("""
+    def cache_on_disk():
+        import time
+        t=cache.disk('time',lambda:time.ctime(),time_expire=5)
+        return dict(time=t,link=A('click to reload',_href=URL(r=request)))
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    The output of lambda:time.ctime() is cached on disk (using the shelve module) for 5 seconds.
+    
    Try it here: cache_on_disk
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: cache_examples.py 
+    {{=CODE("""
+    def cache_in_ram_and_disk():
+        import time
+        t=cache.ram('time',lambda:cache.disk('time',
+                           lambda:time.ctime(),time_expire=5),time_expire=5)
+        return dict(time=t,link=A('click to reload',_href=URL(r=request)))
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    The output of lambda:time.ctime() is cached on disk (using the shelve module) and then in ram for 5 seconds. web2py looks in ram first and if not there it looks on disk. If it is not on disk it calls the function. This is useful in a multiprocess type of environment. The two times do not have to be the same.
+    
    Try it here: cache_in_ram_and_disk
    
+
+
+    
    Example {{=c}}{{c+=1}}
    In controller: cache_examples.py 
+    {{=CODE("""
+    @cache(request.env.path_info,time_expire=5,cache_model=cache.ram)
+    def cache_controller_in_ram():
+        import time
+        t=time.ctime()
+        return dict(time=t,link=A('click to reload',_href=URL(r=request)))""".strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    Here the entire controller (dictionary) is cached in ram for 5 seconds. The result of a select cannot be cached unless it is first serialized into a table lambda:SQLTABLE(db().select(db.users.ALL)).xml(). You can read below for an even better way to do it.
+    
    Try it here: cache_controller_in_ram
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: cache_examples.py 
+    {{=CODE("""
+    @cache(request.env.path_info,time_expire=5,cache_model=cache.disk)
+    def cache_controller_on_disk():
+        import time
+        t=time.ctime()
+        return dict(time=t,link=A('click to reload',_href=URL(r=request)))
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    Here the entire controller (dictionary) is cached on disk for 5 seconds. This will not work if the dictionary contains unpickleable objects.
+    
    Try it here: cache_controller_on_disk
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: cache_examples.py 
+    {{=CODE("""
+    @cache(request.env.path_info,time_expire=5,cache_model=cache.ram)
+    def cache_controller_and_view():
+        import time
+        t=time.ctime()
+        d=dict(time=t,link=A('click to reload',_href=URL(r=request)))
+        return response.render(d)
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    response.render(d) renders the dictionary inside the controller, so everything is cached now for 5 seconds. This is best and fastest way of caching!
+    
    Try it here: cache_controller_and_view
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: cache_examples.py 
+    {{=CODE("""
+    def cache_db_select():
+        import time
+        db.users.insert(name='somebody',email='gluon@mdp.cti.depaul.edu')
+        records=db().select(db.users.ALL,cache=(cache.ram,5))
+        if len(records)>20: db(db.users.id>0).delete()
+        return dict(records=records)
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    The results of a select are complex unpickleable objects that cannot be cached using the previous method, but the select command takes an argument cache=(cache_model,time_expire) and will cache the result of the query accordingly. Notice that the key is not necessary since key is generated based on the database name and the select string.
+    
    Try it here: cache_db_select
    
+
+    
    Ajax Examples
    
+
+
+    
    Example {{=c}}{{c+=1}}
    In controller: ajax_examples.py
+    {{=CODE("""
+    def index():
+        return dict()
+
+    def data():
+        if not session.m or len(session.m)==10: session.m=[]
+        if request.vars.q: session.m.append(request.vars.q)
+        session.m.sort()
+        return TABLE(*[TR(v) for v in session.m]).xml()
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    In view: ajax_examples/index.html
+    {{=CODE(open(os.path.join(request.folder,'views/ajax_examples/index.html'),'r').read(),language='html',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    The javascript function "ajax" is provided in "web2py_ajax.html" and included by "layout.html". It takes three arguments, a url, a list of ids and a target id. When called, it sends to the url (via a get) the values of the ids and display the response in the value (of innerHTML) of the target id.
+    
    Try it here: index
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: ajax_examples.py 
+    {{=CODE("""
+    def flash():
+        response.flash='this text should appear!'
+        return dict()
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    Try it here: flash
    
+
+    
    Example {{=c}}{{c+=1}}
    In controller: ajax_examples.py 
+    {{=CODE("""
+    def fade():
+        return dict()
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    In view: ajax_examples/fade.html 
    
+    {{=CODE(open(os.path.join(request.folder,'views/ajax_examples/fade.html'),'r').read(),language='html',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    Try it here: fade
    
+
+    
    Excel-like spreadsheet via Ajax
    
+    Web2py includes a widget that acts like an Excel-like spreadsheet and can be used to build forms
+    [read more].
+
+    
    Testing Examples
    
+
+
+    
    Example {{=c}}{{c+=1}}
    
+    
    Using the Python doctest notation it is possible to write tests for all controller functions. Tests are then run via the administrative interface which generates a report. Here is an example of a test in the code:
+    {{=CODE("""
+    def index():
+        '''
+        This is a docstring. The following 3 lines are a doctest:
+        >>> request.vars.name='Max'
+        >>> index()
+        {'name': 'Max'}
+        '''
+        return dict(name=request.vars.name)
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    
+
+    
    Streaming Examples
    
+
+
+    
    Example {{=c}}{{c+=1}}
    
+    
    It is very easy in web2py to stream large files. Here is an example of a controller that does so:
    
+    {{=CODE("""
+    def streamer():
+        import os
+        path=os.path.join(request.folder,'private','largefile.mpeg4')
+        return response.stream(open(path,'rb'),chunk_size=4096)
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+    
    By default all static files and files stored in 'upload' fields in the database are streamed when larger than 1MByte.
    
+
+    
    web2py automatically and transparently handles PARTIAL_CONTENT and RANGE requests.
    
+
+    
    XML-RPC Examples
    
+
+    
    Example {{=c}}{{c+=1}}
    
+    
    Web2py has native support for the XMLRPC protocol. Below is a controller function "handler" that exposes two functions, "add" and "sub" via XMLRPC. The controller "tester" executes the two function remotely via xmlrpc.
    
+    {{=CODE("""
+    from gluon.tools import Service
+    service = Service(globals())
+
+    @service.xmlrpc
+    def add(a,b): return a+b
+
+    @service.xmlrpc
+    def sub(a,b): return a-b
+
+    def call(): return service()
+
+    def tester():
+        import xmlrpclib
+        server=xmlrpclib.ServerProxy('http://hostname:port/app/controller/call/xmlrpc')
+        return str(server.add(3,4)+server.sub(3,4))
+    """.strip(),language='web2py',link=URL(r=request,c='global',f='vars'),_class='boxCode')}}
+
+
    
+
    
+{{block sidebar}}{{end}}

ADDED   applications/examples/views/default/index.html
Index: applications/examples/views/default/index.html
==================================================================
--- /dev/null
+++ applications/examples/views/default/index.html
@@ -0,0 +1,32 @@
+{{extend 'layout.html'}}
+
+
    
+  
    
+    {{=get_content('maincontent')}}
+  
    
+  
    
+    {{=get_content('whyweb2py')}}
+  
    
+  
    
+    
    {{=T('Recent development')}}
    
+    {{=code_feed_reader(project='web2py',mode='nodiv')}}  
+  
     
+  
    
+    
    {{=T('Latest posts from user forum')}}
    
+    {{=group_feed_reader(group='web2py',mode='nodiv')}}
+  
     
+
    
+
+{{block sidebar}}
+    {{super}}
+
+
    
+  
    
+    
+  
     
+  
                
+  
    
+
        
+{{end}}

ADDED   applications/examples/views/default/license.html
Index: applications/examples/views/default/license.html
==================================================================
--- /dev/null
+++ applications/examples/views/default/license.html
@@ -0,0 +1,7 @@
+{{extend 'layout.html'}}
+
+
    
+  
    web2py License Agreement
    
+  {{=license}}
+
    
+

ADDED   applications/examples/views/default/support.html
Index: applications/examples/views/default/support.html
==================================================================
--- /dev/null
+++ applications/examples/views/default/support.html
@@ -0,0 +1,40 @@
+{{extend 'layout.html'}}
+
    
+  
    Support for web2pyTM
    
+  
+  
    You can get a lot of free support by joining our mailing list. We also have a FAQ page.
    
+
+  
    Affiliated Companies
          
+
+  
    For long term professional support, code review and contract work you can contact our core developers:
    
+
+  
    
+    
+  
    
+
+  
    For professional support you can also contact one of the companies below:
    
+  
+  
    
+    
+    
+  
    
+
    
+
+{{block leftbadges}}{{end}}

ADDED   applications/examples/views/default/usergroups.html
Index: applications/examples/views/default/usergroups.html
==================================================================
--- /dev/null
+++ applications/examples/views/default/usergroups.html
@@ -0,0 +1,9 @@
+{{extend 'layout.html'}}
+
+
    
+  
    
+    {{=get_content('grouplist')}}
+  
        
+
    
+
+    

ADDED   applications/examples/views/default/videos.html
Index: applications/examples/views/default/videos.html
==================================================================
--- /dev/null
+++ applications/examples/views/default/videos.html
@@ -0,0 +1,16 @@
+{{extend 'layout.html'}}
+

    
+
    
+  
    {{=T('web2py videos')}}
      
+  
    
+    
+      
+      
+      
+      
+      
+       
+  
    
+
     
+
+

ADDED   applications/examples/views/default/what.html
Index: applications/examples/views/default/what.html
==================================================================
--- /dev/null
+++ applications/examples/views/default/what.html
@@ -0,0 +1,58 @@
+{{extend 'layout.html'}} {{import os}}
+
    
+    
    What is web2pyTM
    
+    
    
+    
    The best way to understand web2py is to try it.
+    You can try it online here.
     
+    This online version is identical to the actual web2py although some functions are disabled for security reasons.
    
+    
    
+    
    web2py was inspired by Ruby on Rails and, as Rails, it focuses on rapid development and follows a Model View Controller design. web2py differs from Rails because it is based on Python (thus it is faster and more scalable), because it provides a comprehensive web-based administrative interface (thus there is no need to ever type shell commands unless you wish), includes libraries to handle more protocols (for example XML-RPC and RSS feeds), and can run on the Google App Engine.
    
+
+    
    web2py was also inspired by Django and, as Django, it has the ability to generate forms from database tables and it includes an extensive set of validators. web2py differs from Django because it is more compact, easier to learn and does not have any project-level configuration files.
    
+
+    
    web2py is less verbose than Java-based frameworks and its syntax is much cleaner than PHP-based frameworks. This makes applications simpler to develop, and easier to read
+    and maintain.
    
+    
    
+        
    Here is a features comparison of web2py vs other popular web frameworks
+    
    
+    
    web2py comes in source code version (for any Operating System that runs Python) and in binary versions for OSX and Windows. web2py does not need to be installed. You unzip it, click on it, and choose a one-time administrator password. It then opens the browser for you and directs you to the administrative interface. Everything it needs to make this happen (the Python interpreter, the web-server, the relational database, etc.) is already packaged with web2py. If you need more power you customize your applications to use your preferred web-server (for example Apache) and your preferred database engine (for example PostgreSQL or Oracle).
    
+
+    
    Via the admin interface you can upload a packed application, create a new application, design an application, maintain an existing application, bytecode-compile an application, pack and download an application. Everything can be done via the web-based admin interface, including editing the files that comprise your applications, clearing temp files, browsing past tickets/errors, run tests, interact with the database. If you so choose, it is also possible to interact with web2py via the Operating System shell or the Python shell.
    
+
+    
    Any web2py application is comprised of Models (files that contain a description of the data representation), Views (files that contain a description of the data presentation), Controllers (files that contain a description of the business logic and workflow), Cron Jobs (tasks that need to be executed regularly in background), Modules (collections of reusable classes and functions), and Static Files (images, scripts, stylesheets, etc.).
+    
    
+
+    
    Controllers consist of functions that are associated to a URL and are called when the associated URL is visited. Models are executed before the function is called, independently on the visited URL (for each app). Views are called when the function returns data other than a string, and renders the data in the proper format (for example html).
    
+
+    
    
+    
    A web2py application can be as simple as a single file (controllers/default.py) containing:
    
+    
+    {{=CODE('def index(): return "Hello World"',counter=None,_class='boxCode')}}
+    
+    
    When http://localhost:8000/app/default/index is visited the function is called and it displays the message "Hello World".
    
+    
+    
    Here is a more complex complete application that lets the visitor upload images into a database:
    
+    
+    {{=CODE("""# in Model
+db=DAL('sqlite://storage.db')
+db.define_table('image', 
+                Field('name'),
+                Field('file','upload'))""",counter=None,_class='boxCode')}}
+    {{=CODE("""# in Controller
+def index():
+    form = SQLFORM(db.image)
+    if form.accepts(request.vars, session):
+        response.flash = 'image uploaded'
+    return dict(form = form)""",counter=None,_class='boxCode')}}
+    
+    {{=CODE(
+    """# in View
+[[extend 'layout.html']]
+
    Image upload form
    
+[[= form]]""".replace('[','{').replace(']','}'),counter=None,_class='boxCode')}}
+   
+    
    Uploaded images are safely renamed to avoid directory traversal vulnerabilities, stored on the filesystem (or database) and a corresponding entry is inserted in the database, linking the file. A built-in mechanism prevents involuntary double form submission. All DB IO is transaction safe by default. Any exception in the code causes the transaction to rollback.
    
+    
    
+    
    Examples of more complex sample applications can be found here
    
+     
    
+
    

ADDED   applications/examples/views/default/who.html
Index: applications/examples/views/default/who.html
==================================================================
--- /dev/null
+++ applications/examples/views/default/who.html
@@ -0,0 +1,147 @@
+{{extend 'layout.html'}}
+
    
+  
    
+    The web2py™ Team
+  
    
+  
    
+    Lead Developer
+  
    
+  
      
+    
    • 
+      Massimo Di Pierro
+      (Associate Professor in Computer Science at DePaul University in Chicago)
+    
      • 
+  
    
+  
    
+    Contributor Agreement
+  
    
+  
    
+    By contributing to web2py you implicitly agree to the
+    web2py contributor agreement.
+     Please also send us a signed copy by fax or, scanned, by email.
+  
    
+  
    
+    
    
+      Main Contributors
+    
    
+    
      
+      
+     
    • Alexey Nezhdanov (GAE and database performance)
+
    • Alvaro Justen (dynamical translations)
+
    • Anthony Bastardi (new poweredby site, LoadFactory)
+
    • Arun K. Rajeevan (plugin_wiki)
+
    • Attila Csipa (cron job)
+
    • Bill Ferrett (modular DAL design)
+
    • Boris Manojlovic (ajax edit) 
+
    • Branko Vukelic (new admin app)
+
    • Brian Meredyk (SQLite and executesql)
+
    • Bruno Rocha (book, new examples app, better forms)
+
    • Carsten Haese (Informix)
+
    • Chris Clark (Ingres, Jython support)
+
    • Chris Steel
+
    • Christian Foster Howes (GAE support)
+
    • Christopher Smiga (Informix)
+
    • CJ Lazell (tester)
+
    • Craig Younkins (Security)
+
    • Daniel Lin (Taiwanese internationalization)
+
    • David Wagner (security and cryptography expert) 
+
    • Denes Lengyel (validators, DB2 support, DAL, custom forms, legacy table support)
+
    • Douglas Soares de Andrade (2.4 and 2.6 compliance, docstrings)
+
    • Eric Vicenti (email with ssl)
+
    • Falko Krause (mysql support)
+
    • Fran Boon (authorization and authentication)
+
    • Francisco Gama (bug fixing)
+
    • Fred Yanowski (XHTML compliance)
+
    • Gilson Filho
+
    • Graham Dumpleton (WSGI)
+
    • Gyuris Szabolcs (PGP Mail)
+
    • Hamdy Abdel-Badeea (crud)
+
    • Hans Donner (GAE support, Google login, widgets, Sphinx documentation)
+
    • Hans Murx (Database support)
+
    • Hans C. v. Stockhausen (OpenID, Google Wave)
+
    • Ian Reinhart Geiser (html helpers)
+
    • Jonathan Benn (is_url validator and tests)
+
    • Jonathan Lundell (multiple contributions)
+
    • Josh Goldfoot (xaml/html sanitizer)
+
    • Jose Jachuf (Firebird support)
+
    • Josh Jaques (web2py_ajax)
+
    • José Vicente de Sousa (Layout for examples app/ main website)
+
    • Keith Yang (openid)
+
    • Kyle Smith (javascript)
+
    • Limodou (winservice)
+
    • Lucas D'Ávila
+
    • Marcel Leuthi (Oracle support)
+
    • Marcel Hellkamp (Bottle developer, multiple web server support)
+
    • Marcello Della Longa (italian translation)
+
    • Mariano Reingart (pysoaplib)
+
    • Mark Larsen (taskbar widget)
+
    • Mark Moore (databases and daemon scripts)
+
    • Markus Gritsch (bug fixing)
+
    • Martin Hufsky (expressions in DAL)
+
    • Martin Mulone (new welcome app)
+
    • Mateusz Banach (stickers, IS_EMAIL, IS_IMAGE, contenttype)
+
    • Michael Willis (shell)
+
    • Michele Comitini (faceboook)
+
    • Nathan Freeze (admin design, IS_STRONG, DAL features, web2pyslices.com)
+
    • Niall Sweeny (MSSQL support)
+
    • Niccolo Polo (epydoc)
+
    • Nicolas Bruxer (memcache support)
+
    • Ondrej Such (MSSQL support)
+
    • Ovidio Marinho Falcao Neto
+
    • Pai (internationalization)
+
    • Patrick Breitenbach
+
    • Phyo Arkar Lwin (web hosting and Jython tester)
+
    • Pierre Thibault (Eclipse integration and custom import)
+
    • Robin Bhattacharyya (Google App Engine support)
+
    • Ross Peoples (MSSQL, multiple contributions)
+
    • Ruijun Luo (a.k.a. Iceberg) (setup_exe.py)
+
    • Ryan Seto (template.py)
+
    • Scott Roberts (testing, book)
+
    • Sergey Podlesnyi (Oracle and migrations tester)
+
    • Sharriff Aina (tester and PyAMF integration)
+
    • Sriram Durbha (book)
+
    • Sterling Hankins (tester, book)
+
    • Stuart Rackham (MSSQL support)
+
    • Telman Yusupov (Oracle support)
+
    • Thadeus Burgess (validators)
+
    • Tim Michelsen (Sphinx documentation)
+
    • Timothy Farrell (python 2.6 compliance, windows support)
+
    • Yair Eshel (internationalizaiton)
+
    • Yarko Tymciurak (design, Sphinx documentation)
+
    • Younghyun Jo (internationalization)
+
    • Vidul Nikolaev Petrov (captcha)
+
    • Zahariash (memory management)
+
      • 
+
+      
    
+    
    
+    
    
+      
    
+        Third party software included in web2py
+      
    
+      
      
+
+
    • Python created by Guido van Rossum.
      • 
+
    • Rocket Web Server developed by Timothy Farrell.
      • 
+
    • EditArea developed by Christophe Dolivet
      • 
+
    • nicEdit developed by Brian Kirchoff
      • 
+
    • simplejson developed by Bob Ippolito
      • 
+
    • PyRTF developed by Simon Cusack and revised by Grant Edwards
      • 
+
    • PyRSS2Gen developed by Dalke Scientific Software
      • 
+
    • feedparser developed by Mark Pilgrim
      • 
+
    • markdown2 developed by Trent Mick
      • 
+
    • fcgi.py devloped by Allan Saddi (for production Lighttpd servers)
      • 
+
    • memcache developed by Evan Martin
      • 
+
    • jQuery developed by John Resig
      •  
+
    • A syntax highlighter inspired by the code of Peter Wilkinson
      • 
+
+      
    
+    
    
+
    
+
+
+
+
+
+
+  

ADDED   applications/examples/views/generic.html
Index: applications/examples/views/generic.html
==================================================================
--- /dev/null
+++ applications/examples/views/generic.html
@@ -0,0 +1,20 @@
+{{extend 'layout.html'}}
+{{"""
+
+You should not modify this file. 
+It is used as default when a view is not provided for your controllers
+
+"""}}
+
+{{=BEAUTIFY(response._vars)}}
+
+
+
+
+
+
+
+
+
+
+{{block sidebar}}{{end}}

ADDED   applications/examples/views/generic.json
Index: applications/examples/views/generic.json
==================================================================
--- /dev/null
+++ applications/examples/views/generic.json
@@ -0,0 +1,15 @@
+{{
+###
+# response._vars contains the dictionary returned by the controller action
+###
+try:
+	from gluon.serializers import json
+	response.write(json(response._vars), escape=False)
+	response.headers['Content-Type'] = 'application/json'
+except (TypeError, ValueError):
+	raise HTTP(405, 'JSON serialization error')
+except ImportError:
+	raise HTTP(405, 'JSON not available')
+except:
+	raise HTTP(405, 'JSON error')
+}}

ADDED   applications/examples/views/generic.load
Index: applications/examples/views/generic.load
==================================================================
--- /dev/null
+++ applications/examples/views/generic.load
@@ -0,0 +1,1 @@
+{{response.headers['web2py-response-flash']=response.flash}}{{if len(response._vars)==1:}}{{=response._vars.values()[0]}}{{else:}}{{=BEAUTIFY(response._vars)}}{{pass}}

ADDED   applications/examples/views/generic.rss
Index: applications/examples/views/generic.rss
==================================================================
--- /dev/null
+++ applications/examples/views/generic.rss
@@ -0,0 +1,20 @@
+{{
+###
+# response._vars contains the dictionary returned by the controller action
+# for this to work the action must return something like
+#
+#   dict(title=...,link=...,description=...,created_on='...',items=...)
+#
+# items is a list of dictionaries each with title, link, description, pub_date.
+###
+try:
+   from gluon.serializers import rss   
+   response.write(rss(response._vars), escape=False)
+   response.headers['Content-Type'] = 'application/rss+xml'
+except (TypeError, ValueError):
+	raise HTTP(405, 'RSS serialization error')
+except ImportError:
+	raise HTTP(405, 'RSS not available')
+except:
+	raise HTTP(405, 'RSS error')
+}}

ADDED   applications/examples/views/generic.xml
Index: applications/examples/views/generic.xml
==================================================================
--- /dev/null
+++ applications/examples/views/generic.xml
@@ -0,0 +1,15 @@
+{{
+###
+# response._vars contains the dictionary returned by thecontroller action
+###
+try:
+   from gluon.serializers import xml
+   response.write(xml(response._vars), escape=False)
+   response.headers['Content-Type'] = 'text/xml'
+except (TypeError, ValueError):
+	raise HTTP(405, 'XML serialization error')
+except ImportError:
+	raise HTTP(405, 'XML not available')
+except:
+	raise HTTP(405, 'XML error')
+}}

ADDED   applications/examples/views/global/vars.html
Index: applications/examples/views/global/vars.html
==================================================================
--- /dev/null
+++ applications/examples/views/global/vars.html
@@ -0,0 +1,47 @@
+{{extend 'layout.html'}}
+{{import cgi}}
+
+
    
+    
    {{=T('Docs for')}} {{=title}}
    
+
+    
+
+    
    {{=T('Description')}}
    
+
+    
    
+    {{if t:}}
+    {{=t}}{{if d:}} extends {{=d}}{{pass}}
+    {{pass}}
+    
    
+    {{pass}}
+
+    {{if doc:}}

    {{=CODE(str(doc),language=None,counter=None,_class='boxCode')}}{{pass}}
+    

    
+    
    
+    
    {{=T('Attributes')}}
    
+
+    {{keys=attributes.keys(); keys.sort()}}
+    
+    
+    {{for a in keys:}}
+    {{doc1,t1,c1,d1=attributes[a]}}
+    
+    
+    
+    
+    
+    {{pass}}
+    
    {{#=a}}{{=A(a,_href=URL(r=request,args=a.split('.')))}}
+    {{if t1:}}
+    {{=t1}}{{if d1:}} extends {{=d1}}{{pass}}
+    {{if c1:}} belongs to class {{=c1}}{{pass}}
+    
    
+    {{pass}}
+    {{if doc1:}}{{=XML(cgi.escape(str(doc1)).replace(chr(13),'
    '))}}{{pass}}
+    
    
+    
    
+
    

ADDED   applications/examples/views/images_examples/index.html
Index: applications/examples/views/images_examples/index.html
==================================================================
--- /dev/null
+++ applications/examples/views/images_examples/index.html
@@ -0,0 +1,5 @@
+{{extend 'layout.html'}}
+
    Upload page
    
+{{=form}}
+
+{{block sidebar end}}

ADDED   applications/examples/views/layout.html
Index: applications/examples/views/layout.html
==================================================================
--- /dev/null
+++ applications/examples/views/layout.html
@@ -0,0 +1,138 @@
+
+
+  
+    {{=response.title or request.application}}
+    
+      
+      {{
+      #---- (CSS) -----)
+      import random
+      response.files.append(URL('static','css/menu.css'))
+      response.files.append(URL('static','css/home.css'))
+      
+      #------ include web2py specific js code (jquery, calendar, form stuff) ------
+      }}
+      {{include 'web2py_ajax.html'}}      
+      {{=toggle_menuclass()}}
+  
+  
+  
+    
    
+      
    {{=response.flash or ''}}
    
+    
    
+    
    
+      
+      
    
+	
    
+	  
+	  
    
+            {{=T('Home')}} 
+            {{=T('About')}} 
+            {{=T('Download')}}
+            {{=T('Staff')}} 
+            {{=T('Support')}} 
+            {{=T('Documentation')}} 
+	  
    
+	
    
+      
    
+      
+      
+      
    	  
+	
+	{{include}}
+	
+	{{block sidebar}}
+	
       
+          
    
+	    
+	      
    
+      	      
+		  {{=T('Download')}}    
+	      
+	      
+		{{=T('Latest Stable ')}}{{=request.env.web2py_version[:15]}}
+	      
+	        
+	  
         
+	  
+          
+	  
+          
     
+          
+          
    
+             {{=T('User groups')}}
+          
       
+	  
    
+            {{=T('User Voice')}}
+          
    
+          
    
+            Twitter
+          
     
+          
    
+            {{=T('Live Chat (IRC)')}}
+          
    
+          
    
+            {{=T('F.A.Q.')}}
+          
    
+          
    
+            {{=T('Quick Examples')}}
+          
    
+          
    
+            {{=T('Videos')}}
+          
    
+          
+          
    
+            web2py Slices
+          
    
+          
    
+            {{=T('Interactive demo')}}
+          
    
+          
    
+            {{=T('Free appliances')}}
+          
    
+          
    
+            {{=T('Plugins')}}
+          
    
+	 
+	
    
+	
+	{{end}}
+      
    
+      
+         
+      
    
+	
    
+    	  
+    	  
+    	  
    © 2010 by Massimo Di Pierro
    
+    	  
+    	  
        	  
+  	
    
+      
    
+    
        
+  
+
+  

ADDED   applications/examples/views/layout_examples/basic.html
Index: applications/examples/views/layout_examples/basic.html
==================================================================
--- /dev/null
+++ applications/examples/views/layout_examples/basic.html
@@ -0,0 +1,3 @@
+{{extend 'layout.html'}}  
+
    {{=message}}
     
+{{for i in range(1000):}}bla {{pass}}

ADDED   applications/examples/views/layout_examples/civilized.html
Index: applications/examples/views/layout_examples/civilized.html
==================================================================
--- /dev/null
+++ applications/examples/views/layout_examples/civilized.html
@@ -0,0 +1,3 @@
+{{extend 'layout_examples/layout_civilized.html'}}
+   
    {{=message}}
    
+
    {{for i in range(1000):}}bla {{pass}} 
    

ADDED   applications/examples/views/layout_examples/layout_civilized.html
Index: applications/examples/views/layout_examples/layout_civilized.html
==================================================================
--- /dev/null
+++ applications/examples/views/layout_examples/layout_civilized.html
@@ -0,0 +1,290 @@
+
+
+
+
+
+{{=request.application}}
+
+
+
+
+
+
    
+	
+    {{if response.menu:}}
+	
+    {{pass}}
+	
    
+		
    
+			
    
+            {{if response.flash:}}
    FLASH: {{=response.flash}}
    {{pass}}
+			{{include}}
+			
    
+		
    
+		
    
+		
    
+		
    
+	
    
+	
+
    
+
+

ADDED   applications/examples/views/layout_examples/layout_sleek.html
Index: applications/examples/views/layout_examples/layout_sleek.html
==================================================================
--- /dev/null
+++ applications/examples/views/layout_examples/layout_sleek.html
@@ -0,0 +1,252 @@
+
+
+
+
+
+{{=request.application}}
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    
+
    
+
    
+
    
+
+
    
+{{if response.flash:}}
    FLASH: {{=response.flash}}
    {{pass}}
+{{include}}
+
    
+
+
    
+
+
+
+

ADDED   applications/examples/views/layout_examples/slick.html
Index: applications/examples/views/layout_examples/slick.html
==================================================================
--- /dev/null
+++ applications/examples/views/layout_examples/slick.html
@@ -0,0 +1,3 @@
+{{extend 'layout_examples/layout_sleek.html'}}  
+
    {{=message}}
     
+{{for i in range(1000):}}bla {{pass}}

ADDED   applications/examples/views/session_examples/counter.html
Index: applications/examples/views/session_examples/counter.html
==================================================================
--- /dev/null
+++ applications/examples/views/session_examples/counter.html
@@ -0,0 +1,8 @@
+{{extend 'layout.html'}}
+
    session counter
    
+
+
    {{for i in range(counter):}}{{=i}}... {{pass}}
    
+
+{{=T('click me to count')}}
+
+{{block sidebar}} {{end}}

ADDED   applications/examples/views/simple_examples/hello3.html
Index: applications/examples/views/simple_examples/hello3.html
==================================================================
--- /dev/null
+++ applications/examples/views/simple_examples/hello3.html
@@ -0,0 +1,2 @@
+{{extend 'layout.html'}}
+
    {{=message}}
    

ADDED   applications/examples/views/spreadsheet/index.html
Index: applications/examples/views/spreadsheet/index.html
==================================================================
--- /dev/null
+++ applications/examples/views/spreadsheet/index.html
@@ -0,0 +1,7 @@
+{{extend 'layout.html'}}
+
+
    Excel-like spreadsheet widget
    
+
+Try insert "=r0c1+1" in cell r0c0 and "2" in r0c1. Formulas start with "=" as in Excel. You can use a subset of python commands and math function, and reference cells by r[row]c[col]. All computations are performed serverside via Ajax (input is validated for security). Cell values and formulas can be set and locked serverside. The shape of the spreadsheet can be modifed serverside and does not need to be tabular (think of it as a graph of css-friendly widgets you can place where you want). Cells can be given arbistrary names. This example is distributed with web2py so look at the source code of the example to learn more.
+
+{{=sheet}}

ADDED   applications/examples/views/template_examples/beautify.html
Index: applications/examples/views/template_examples/beautify.html
==================================================================
--- /dev/null
+++ applications/examples/views/template_examples/beautify.html
@@ -0,0 +1,5 @@
+{{extend 'layout.html'}}
+
    BEAUTIFY
    
+
+
    Message is
    
+{{=message}}

ADDED   applications/examples/views/template_examples/escape.html
Index: applications/examples/views/template_examples/escape.html
==================================================================
--- /dev/null
+++ applications/examples/views/template_examples/escape.html
@@ -0,0 +1,5 @@
+{{extend 'layout.html'}}
+
    Strings are automatically escaped
    
+
+
    Message is
    
+{{=message}}

ADDED   applications/examples/views/template_examples/test_def.html
Index: applications/examples/views/template_examples/test_def.html
==================================================================
--- /dev/null
+++ applications/examples/views/template_examples/test_def.html
@@ -0,0 +1,7 @@
+{{extend 'layout.html'}}
+{{def itemlink(name):}}
  • {{=A(name,_href=name)}}
    • {{return}}
+
      
+{{itemlink('http://www.google.com')}}
+{{itemlink('http://www.yahoo.com')}}
+{{itemlink('http://www.nyt.com')}}
+
    

ADDED   applications/examples/views/template_examples/test_for.html
Index: applications/examples/views/template_examples/test_for.html
==================================================================
--- /dev/null
+++ applications/examples/views/template_examples/test_for.html
@@ -0,0 +1,6 @@
+{{extend 'layout.html'}}
+
    For loop
    
+
+{{for number in ['one','two','three']:}}
+  
    {{=number.capitalize()}}
    
+{{pass}}

ADDED   applications/examples/views/template_examples/test_if.html
Index: applications/examples/views/template_examples/test_if.html
==================================================================
--- /dev/null
+++ applications/examples/views/template_examples/test_if.html
@@ -0,0 +1,12 @@
+{{extend 'layout.html'}}
+
    If statement
    
+
+{{
+a=10
+}}
+
+{{if a%2==0:}}
+
    {{=a}} is even
    
+{{else:}}
+
    {{=a}} is odd
    
+{{pass}}

ADDED   applications/examples/views/template_examples/test_try.html
Index: applications/examples/views/template_examples/test_try.html
==================================================================
--- /dev/null
+++ applications/examples/views/template_examples/test_try.html
@@ -0,0 +1,8 @@
+{{extend 'layout.html'}}
+
    Try... except
    
+
+{{try:}}
+   
    a={{=1/0}}
    
+{{except:}}
+   infinity
    
+{{pass}}

ADDED   applications/examples/views/template_examples/variables.html
Index: applications/examples/views/template_examples/variables.html
==================================================================
--- /dev/null
+++ applications/examples/views/template_examples/variables.html
@@ -0,0 +1,4 @@
+{{extend 'layout.html'}}
+
    Your variables
    
+
    a={{=a}}
    
+
    a={{=b}}
    

ADDED   applications/examples/views/template_examples/xml.html
Index: applications/examples/views/template_examples/xml.html
==================================================================
--- /dev/null
+++ applications/examples/views/template_examples/xml.html
@@ -0,0 +1,5 @@
+{{extend 'layout.html'}}
+
    XML
    
+
+
    Message is
    
+{{=message}}

ADDED   applications/examples/views/web2py_ajax.html
Index: applications/examples/views/web2py_ajax.html
==================================================================
--- /dev/null
+++ applications/examples/views/web2py_ajax.html
@@ -0,0 +1,27 @@
+{{
+response.files.insert(0,URL('static','js/jquery.js'))
+response.files.insert(1,URL('static','css/calendar.css'))
+response.files.insert(2,URL('static','js/calendar.js'))
+for _item in response.meta or []:}}
+     {{
+pass
+for _k,_file in enumerate(response.files or []):
+  if _file in response.files[:_k]:
+     continue
+  _file0=_file.lower().split('?')[0]
+  if _file0.endswith('.css'):}}
+     {{
+  elif _file0.endswith('.js'):}}
+     {{
+  pass
+pass
+}}
+
+    
+
+    

ADDED   applications/mobileblur/ABOUT
Index: applications/mobileblur/ABOUT
==================================================================
--- /dev/null
+++ applications/mobileblur/ABOUT
@@ -0,0 +1,2 @@
+Write something about this app.
+Developed with web2py.

ADDED   applications/mobileblur/LICENSE
Index: applications/mobileblur/LICENSE
==================================================================
--- /dev/null
+++ applications/mobileblur/LICENSE
@@ -0,0 +1,4 @@
+The web2py welcome app is licensed under public domain 
+(except for the css and js files that it includes, which have their own third party licenses).
+
+You can modify this license when you add your own code.

ADDED   applications/mobileblur/__init__.py
Index: applications/mobileblur/__init__.py
==================================================================
--- /dev/null
+++ applications/mobileblur/__init__.py

ADDED   applications/mobileblur/controllers/appadmin.py
Index: applications/mobileblur/controllers/appadmin.py
==================================================================
--- /dev/null
+++ applications/mobileblur/controllers/appadmin.py
@@ -0,0 +1,408 @@
+# -*- coding: utf-8 -*-
+
+# ##########################################################
+# ## make sure administrator is on localhost
+# ###########################################################
+
+import os
+import socket
+import datetime
+import copy
+import gluon.contenttype
+import gluon.fileutils
+
+# ## critical --- make a copy of the environment
+
+global_env = copy.copy(globals())
+global_env['datetime'] = datetime
+
+http_host = request.env.http_host.split(':')[0]
+remote_addr = request.env.remote_addr
+try:
+    hosts = (http_host, socket.gethostname(),
+             socket.gethostbyname(http_host),
+             '::1','127.0.0.1','::ffff:127.0.0.1')
+except:
+    hosts = (http_host, )
+
+if request.env.http_x_forwarded_for or request.env.wsgi_url_scheme\
+     in ['https', 'HTTPS']:
+    session.secure()
+elif (remote_addr not in hosts) and (remote_addr != "127.0.0.1"):
+    raise HTTP(200, T('appadmin is disabled because insecure channel'))
+
+if (request.application=='admin' and not session.authorized) or \
+        (request.application!='admin' and not gluon.fileutils.check_credentials(request)):
+    redirect(URL('admin', 'default', 'index'))
+
+ignore_rw = True
+response.view = 'appadmin.html'
+response.menu = [[T('design'), False, URL('admin', 'default', 'design',
+                 args=[request.application])], [T('db'), False,
+                 URL('index')], [T('state'), False,
+                 URL('state')], [T('cache'), False,
+                 URL('ccache')]]
+
+# ##########################################################
+# ## auxiliary functions
+# ###########################################################
+
+
+def get_databases(request):
+    dbs = {}
+    for (key, value) in global_env.items():
+        cond = False
+        try:
+            cond = isinstance(value, GQLDB)
+        except:
+            cond = isinstance(value, SQLDB)
+        if cond:
+            dbs[key] = value
+    return dbs
+
+
+databases = get_databases(None)
+
+
+def eval_in_global_env(text):
+    exec ('_ret=%s' % text, {}, global_env)
+    return global_env['_ret']
+
+
+def get_database(request):
+    if request.args and request.args[0] in databases:
+        return eval_in_global_env(request.args[0])
+    else:
+        session.flash = T('invalid request')
+        redirect(URL('index'))
+
+
+def get_table(request):
+    db = get_database(request)
+    if len(request.args) > 1 and request.args[1] in db.tables:
+        return (db, request.args[1])
+    else:
+        session.flash = T('invalid request')
+        redirect(URL('index'))
+
+
+def get_query(request):
+    try:
+        return eval_in_global_env(request.vars.query)
+    except Exception:
+        return None
+
+
+def query_by_table_type(tablename,db,request=request):
+    keyed = hasattr(db[tablename],'_primarykey')
+    if keyed:
+        firstkey = db[tablename][db[tablename]._primarykey[0]]
+        cond = '>0'
+        if firstkey.type in ['string', 'text']:
+            cond = '!=""'
+        qry = '%s.%s.%s%s' % (request.args[0], request.args[1], firstkey.name, cond)
+    else:
+        qry = '%s.%s.id>0' % tuple(request.args[:2])
+    return qry
+
+
+
+# ##########################################################
+# ## list all databases and tables
+# ###########################################################
+
+
+def index():
+    return dict(databases=databases)
+
+
+# ##########################################################
+# ## insert a new record
+# ###########################################################
+
+
+def insert():
+    (db, table) = get_table(request)
+    form = SQLFORM(db[table], ignore_rw=ignore_rw)
+    if form.accepts(request.vars, session):
+        response.flash = T('new record inserted')
+    return dict(form=form,table=db[table])
+
+
+# ##########################################################
+# ## list all records in table and insert new record
+# ###########################################################
+
+
+def download():
+    import os
+    db = get_database(request)
+    return response.download(request,db)
+
+def csv():
+    import gluon.contenttype
+    response.headers['Content-Type'] = \
+        gluon.contenttype.contenttype('.csv')
+    db = get_database(request)
+    query = get_query(request)
+    if not query:
+        return None
+    response.headers['Content-disposition'] = 'attachment; filename=%s_%s.csv'\
+         % tuple(request.vars.query.split('.')[:2])
+    return str(db(query).select())
+
+
+def import_csv(table, file):
+    table.import_from_csv_file(file)
+
+def select():
+    import re
+    db = get_database(request)
+    dbname = request.args[0]
+    regex = re.compile('(?P\w+)\.(?P\w+)=(?P\d+)')
+    if len(request.args)>1 and hasattr(db[request.args[1]],'_primarykey'):
+        regex = re.compile('(?P
    \w+)\.(?P\w+)=(?P.+)')
+    if request.vars.query:
+        match = regex.match(request.vars.query)
+        if match:
+            request.vars.query = '%s.%s.%s==%s' % (request.args[0],
+                    match.group('table'), match.group('field'),
+                    match.group('value'))
+    else:
+        request.vars.query = session.last_query
+    query = get_query(request)
+    if request.vars.start:
+        start = int(request.vars.start)
+    else:
+        start = 0
+    nrows = 0
+    stop = start + 100
+    table = None
+    rows = []
+    orderby = request.vars.orderby
+    if orderby:
+        orderby = dbname + '.' + orderby
+        if orderby == session.last_orderby:
+            if orderby[0] == '~':
+                orderby = orderby[1:]
+            else:
+                orderby = '~' + orderby
+    session.last_orderby = orderby
+    session.last_query = request.vars.query
+    form = FORM(TABLE(TR(T('Query:'), '', INPUT(_style='width:400px',
+                _name='query', _value=request.vars.query or '',
+                requires=IS_NOT_EMPTY(error_message=T("Cannot be empty")))), TR(T('Update:'),
+                INPUT(_name='update_check', _type='checkbox',
+                value=False), INPUT(_style='width:400px',
+                _name='update_fields', _value=request.vars.update_fields
+                 or '')), TR(T('Delete:'), INPUT(_name='delete_check',
+                _class='delete', _type='checkbox', value=False), ''),
+                TR('', '', INPUT(_type='submit', _value='submit'))),
+                _action=URL(r=request,args=request.args))
+    if request.vars.csvfile != None:
+        try:
+            import_csv(db[request.vars.table],
+                       request.vars.csvfile.file)
+            response.flash = T('data uploaded')
+        except Exception, e:
+            response.flash = DIV(T('unable to parse csv file'),PRE(str(e)))
+    if form.accepts(request.vars, formname=None):
+#         regex = re.compile(request.args[0] + '\.(?P
    \w+)\.id\>0')
+        regex = re.compile(request.args[0] + '\.(?P
    \w+)\..+')
+
+        match = regex.match(form.vars.query.strip())
+        if match:
+            table = match.group('table')
+        try:
+            nrows = db(query).count()
+            if form.vars.update_check and form.vars.update_fields:
+                db(query).update(**eval_in_global_env('dict(%s)'
+                                  % form.vars.update_fields))
+                response.flash = T('%s rows updated', nrows)
+            elif form.vars.delete_check:
+                db(query).delete()
+                response.flash = T('%s rows deleted', nrows)
+            nrows = db(query).count()
+            if orderby:
+                rows = db(query).select(limitby=(start, stop),
+                        orderby=eval_in_global_env(orderby))
+            else:
+                rows = db(query).select(limitby=(start, stop))
+        except Exception, e:
+            (rows, nrows) = ([], 0)
+            response.flash = DIV(T('Invalid Query'),PRE(str(e)))
+    return dict(
+        form=form,
+        table=table,
+        start=start,
+        stop=stop,
+        nrows=nrows,
+        rows=rows,
+        query=request.vars.query,
+        )
+
+
+# ##########################################################
+# ## edit delete one record
+# ###########################################################
+
+
+def update():
+    (db, table) = get_table(request)
+    keyed = hasattr(db[table],'_primarykey')
+    record = None
+    if keyed:
+        key = [f for f in request.vars if f in db[table]._primarykey]
+        if key:
+            record = db(db[table][key[0]] == request.vars[key[0]]).select().first()
+    else:
+        record = db(db[table].id == request.args(2)).select().first()
+
+    if not record:
+        qry = query_by_table_type(table, db)
+        session.flash = T('record does not exist')
+        redirect(URL('select', args=request.args[:1],
+                     vars=dict(query=qry)))
+
+    if keyed:
+        for k in db[table]._primarykey:
+            db[table][k].writable=False
+
+    form = SQLFORM(db[table], record, deletable=True, delete_label=T('Check to delete'),
+                   ignore_rw=ignore_rw and not keyed,
+                   linkto=URL('select',
+                   args=request.args[:1]), upload=URL(r=request,
+                   f='download', args=request.args[:1]))
+
+    if form.accepts(request.vars, session):
+        session.flash = T('done!')
+        qry = query_by_table_type(table, db)
+        redirect(URL('select', args=request.args[:1],
+                 vars=dict(query=qry)))
+    return dict(form=form,table=db[table])
+
+
+# ##########################################################
+# ## get global variables
+# ###########################################################
+
+
+def state():
+    return dict()
+
+def ccache():
+    form = FORM(
+        P(TAG.BUTTON("Clear CACHE?", _type="submit", _name="yes", _value="yes")),
+        P(TAG.BUTTON("Clear RAM", _type="submit", _name="ram", _value="ram")),
+        P(TAG.BUTTON("Clear DISK", _type="submit", _name="disk", _value="disk")),
+    )
+
+    if form.accepts(request.vars, session):
+        clear_ram = False
+        clear_disk = False
+        session.flash = ""
+        if request.vars.yes:
+            clear_ram = clear_disk = True
+        if request.vars.ram:
+            clear_ram = True
+        if request.vars.disk:
+            clear_disk = True
+
+        if clear_ram:
+            cache.ram.clear()
+            session.flash += "Ram Cleared "
+        if clear_disk:
+            cache.disk.clear()
+            session.flash += "Disk Cleared"
+
+        redirect(URL(r=request))
+
+    try:
+        from guppy import hpy; hp=hpy()
+    except ImportError:
+        hp = False
+
+    import shelve, os, copy, time, math
+    from gluon import portalocker
+
+    ram = {
+        'bytes': 0,
+        'objects': 0,
+        'hits': 0,
+        'misses': 0,
+        'ratio': 0,
+        'oldest': time.time()
+    }
+    disk = copy.copy(ram)
+    total = copy.copy(ram)
+
+    for key, value in cache.ram.storage.items():
+        if isinstance(value, dict):
+            ram['hits'] = value['hit_total'] - value['misses']
+            ram['misses'] = value['misses']
+            try:
+                ram['ratio'] = ram['hits'] * 100 / value['hit_total']
+            except (KeyError, ZeroDivisionError):
+                ram['ratio'] = 0
+        else:
+            if hp:
+                ram['bytes'] += hp.iso(value[1]).size
+                ram['objects'] += hp.iso(value[1]).count
+
+                if value[0] < ram['oldest']:
+                    ram['oldest'] = value[0]
+
+    locker = open(os.path.join(request.folder,
+                                        'cache/cache.lock'), 'a')
+    portalocker.lock(locker, portalocker.LOCK_EX)
+    disk_storage = shelve.open(os.path.join(request.folder, 'cache/cache.shelve'))
+    try:
+        for key, value in disk_storage.items():
+            if isinstance(value, dict):
+                disk['hits'] = value['hit_total'] - value['misses']
+                disk['misses'] = value['misses']
+                try:
+                    disk['ratio'] = disk['hits'] * 100 / value['hit_total']
+                except (KeyError, ZeroDivisionError):
+                    disk['ratio'] = 0
+            else:
+                if hp:
+                    disk['bytes'] += hp.iso(value[1]).size
+                    disk['objects'] += hp.iso(value[1]).count
+                    if value[0] < disk['oldest']:
+                        disk['oldest'] = value[0]
+    finally:
+        portalocker.unlock(locker)
+        locker.close()
+        disk_storage.close()
+
+    total['bytes'] = ram['bytes'] + disk['bytes']
+    total['objects'] = ram['objects'] + disk['objects']
+    total['hits'] = ram['hits'] + disk['hits']
+    total['misses'] = ram['misses'] + disk['misses']
+    try:
+        total['ratio'] = total['hits'] * 100 / (total['hits'] + total['misses'])
+    except (KeyError, ZeroDivisionError):
+        total['ratio'] = 0
+
+    if disk['oldest'] < ram['oldest']:
+        total['oldest'] = disk['oldest']
+    else:
+        total['oldest'] = ram['oldest']
+
+    def GetInHMS(seconds):
+        hours = math.floor(seconds / 3600)
+        seconds -= hours * 3600
+        minutes = math.floor(seconds / 60)
+        seconds -= minutes * 60
+        seconds = math.floor(seconds)
+
+        return (hours, minutes, seconds)
+
+    ram['oldest'] = GetInHMS(time.time() - ram['oldest'])
+    disk['oldest'] = GetInHMS(time.time() - disk['oldest'])
+    total['oldest'] = GetInHMS(time.time() - total['oldest'])
+
+    return dict(form=form, total=total,
+                ram=ram, disk=disk)
+

ADDED   applications/mobileblur/controllers/default.py
Index: applications/mobileblur/controllers/default.py
==================================================================
--- /dev/null
+++ applications/mobileblur/controllers/default.py
@@ -0,0 +1,13 @@
+from pprint import pprint
+
+def index():
+    raw_feeds = newsblur.feeds(flat=True)["feeds"]
+    feeds = {}
+    for feed in raw_feeds.itervalues():
+        for i in range(threshold, 2):
+            if feed[thresholds[i]] > 0:
+                feeds[feed["feed_title"]] = feed
+                break
+
+    pprint(feeds)
+    return dict(feeds=feeds, threshold=threshold)

ADDED   applications/mobileblur/controllers/default.py~
Index: applications/mobileblur/controllers/default.py~
==================================================================
--- /dev/null
+++ applications/mobileblur/controllers/default.py~
@@ -0,0 +1,30 @@
+# -*- coding: utf-8 -*-
+# this file is released under public domain and you can use without limitations
+
+from pprint import pprint
+import simplejson
+import urllib
+
+base = "http://newsblur.com/"
+username = "spiffytech"
+password = "JYRKJM9UuQg9"
+threshold = 0
+
+def index():
+    login()
+    data = urllib.urlencode({"flat": "true"})
+    u = urllib.urlopen(base + "reader/feeds?" % data)
+    print u.read()
+    raw_feeds = simplejson.loads(u.read())
+    pprint(raw_feeds)
+    feeds = {}
+    for feed in raw_feeds:
+        if not (feed["ng"] == 0 and feed["nt"] == 0 and feed["ps"] == 0):
+            feeds[feed["feed_title"]] = feed
+
+    return feeds
+    
+def login():
+    data = urllib.urlencode({"login_username": username, "login_password": password})
+    u = urllib.urlopen(base + "api/login", data)
+    print u.read()

ADDED   applications/mobileblur/controllers/feeds.py
Index: applications/mobileblur/controllers/feeds.py
==================================================================
--- /dev/null
+++ applications/mobileblur/controllers/feeds.py
@@ -0,0 +1,9 @@
+# -*- coding: utf-8 -*-
+
+from pprint import pprint
+
+def view():
+    stories = newsblur.feed(request.args[0])["stories"]
+    feeds = newsblur.feeds(flat=True)["feeds"]
+    feed = [feed for feed in feeds.itervalues() if feed["id"]==int(request.args[0])][0]
+    return dict(stories=stories, feed=feed)

ADDED   applications/mobileblur/controllers/stories.py
Index: applications/mobileblur/controllers/stories.py
==================================================================
--- /dev/null
+++ applications/mobileblur/controllers/stories.py
@@ -0,0 +1,8 @@
+# -*- coding: utf-8 -*-
+
+from pprint import pprint
+
+def view():
+    stories = newsblur.feed(request.vars["feed_id"])["stories"]
+    story = [story for story in stories if story["id"]==request.vars["story"]][0]
+    return dict(story=story)

ADDED   applications/mobileblur/cron/crontab
Index: applications/mobileblur/cron/crontab
==================================================================
--- /dev/null
+++ applications/mobileblur/cron/crontab
@@ -0,0 +1,1 @@
+#crontab

ADDED   applications/mobileblur/languages/es-es.py
Index: applications/mobileblur/languages/es-es.py
==================================================================
--- /dev/null
+++ applications/mobileblur/languages/es-es.py
@@ -0,0 +1,259 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"actualice" es una expresión opcional como "campo1=\'nuevo_valor\'". No se puede actualizar o eliminar resultados de un JOIN',
+'%Y-%m-%d': '%Y-%m-%d',
+'%Y-%m-%d %H:%M:%S': '%Y-%m-%d %H:%M:%S',
+'%s rows deleted': '%s filas eliminadas',
+'%s rows updated': '%s filas actualizadas',
+'(something like "it-it")': '(algo como "it-it")',
+'A new version of web2py is available': 'Hay una nueva versión de web2py disponible',
+'A new version of web2py is available: %s': 'Hay una nueva versión de web2py disponible: %s',
+'ATTENTION: Login requires a secure (HTTPS) connection or running on localhost.': 'ATENCION: Inicio de sesión requiere una conexión segura (HTTPS) o localhost.',
+'ATTENTION: TESTING IS NOT THREAD SAFE SO DO NOT PERFORM MULTIPLE TESTS CONCURRENTLY.': 'ATENCION: NO EJECUTE VARIAS PRUEBAS SIMULTANEAMENTE, NO SON THREAD SAFE.',
+'ATTENTION: you cannot edit the running application!': 'ATENCION: no puede modificar la aplicación que se ejecuta!',
+'About': 'Acerca de',
+'About application': 'Acerca de la aplicación',
+'Admin is disabled because insecure channel': 'Admin deshabilitado, el canal no es seguro',
+'Admin is disabled because unsecure channel': 'Admin deshabilitado, el canal no es seguro',
+'Administrator Password:': 'Contraseña del Administrador:',
+'Are you sure you want to delete file "%s"?': '¿Está seguro que desea eliminar el archivo "%s"?',
+'Are you sure you want to uninstall application "%s"': '¿Está seguro que desea desinstalar la aplicación "%s"',
+'Are you sure you want to uninstall application "%s"?': '¿Está seguro que desea desinstalar la aplicación "%s"?',
+'Authentication': 'Autenticación',
+'Available databases and tables': 'Bases de datos y tablas disponibles',
+'Cannot be empty': 'No puede estar vacío',
+'Cannot compile: there are errors in your app.        Debug it, correct errors and try again.': 'No se puede compilar: hay errores en su aplicación. Depure, corrija errores y vuelva a intentarlo.',
+'Change Password': 'Cambie Contraseña',
+'Check to delete': 'Marque para eliminar',
+'Client IP': 'IP del Cliente',
+'Controller': 'Controlador',
+'Controllers': 'Controladores',
+'Copyright': 'Derechos de autor',
+'Create new application': 'Cree una nueva aplicación',
+'Current request': 'Solicitud en curso',
+'Current response': 'Respuesta en curso',
+'Current session': 'Sesión en curso',
+'DB Model': 'Modelo "db"',
+'DESIGN': 'DISEÑO',
+'Database': 'Base de datos',
+'Date and Time': 'Fecha y Hora',
+'Delete': 'Elimine',
+'Delete:': 'Elimine:',
+'Deploy on Google App Engine': 'Instale en Google App Engine',
+'Description': 'Descripción',
+'Design for': 'Diseño para',
+'E-mail': 'Correo electrónico',
+'EDIT': 'EDITAR',
+'Edit': 'Editar',
+'Edit Profile': 'Editar Perfil',
+'Edit This App': 'Edite esta App',
+'Edit application': 'Editar aplicación',
+'Edit current record': 'Edite el registro actual',
+'Editing file': 'Editando archivo',
+'Editing file "%s"': 'Editando archivo "%s"',
+'Error logs for "%(app)s"': 'Bitácora de errores en "%(app)s"',
+'First name': 'Nombre',
+'Functions with no doctests will result in [passed] tests.': 'Funciones sin doctests equivalen a pruebas [aceptadas].',
+'Group ID': 'ID de Grupo',
+'Hello World': 'Hola Mundo',
+'Import/Export': 'Importar/Exportar',
+'Index': 'Indice',
+'Installed applications': 'Aplicaciones instaladas',
+'Internal State': 'Estado Interno',
+'Invalid Query': 'Consulta inválida',
+'Invalid action': 'Acción inválida',
+'Invalid email': 'Correo inválido',
+'Language files (static strings) updated': 'Archivos de lenguaje (cadenas estáticas) actualizados',
+'Languages': 'Lenguajes',
+'Last name': 'Apellido',
+'Last saved on:': 'Guardado en:',
+'Layout': 'Diseño de página',
+'License for': 'Licencia para',
+'Login': 'Inicio de sesión',
+'Login to the Administrative Interface': 'Inicio de sesión para la Interfaz Administrativa',
+'Logout': 'Fin de sesión',
+'Lost Password': 'Contraseña perdida',
+'Main Menu': 'Menú principal',
+'Menu Model': 'Modelo "menu"',
+'Models': 'Modelos',
+'Modules': 'Módulos',
+'NO': 'NO',
+'Name': 'Nombre',
+'New Record': 'Registro nuevo',
+'No databases in this application': 'No hay bases de datos en esta aplicación',
+'Origin': 'Origen',
+'Original/Translation': 'Original/Traducción',
+'Password': 'Contraseña',
+'Peeking at file': 'Visualizando archivo',
+'Powered by': 'Este sitio usa',
+'Query:': 'Consulta:',
+'Record ID': 'ID de Registro',
+'Register': 'Registrese',
+'Registration key': 'Contraseña de Registro',
+'Reset Password key': 'Reset Password key',
+'Resolve Conflict file': 'archivo Resolución de Conflicto',
+'Role': 'Rol',
+'Rows in table': 'Filas en la tabla',
+'Rows selected': 'Filas seleccionadas',
+'Saved file hash:': 'Hash del archivo guardado:',
+'Static files': 'Archivos estáticos',
+'Stylesheet': 'Hoja de estilo',
+'Sure you want to delete this object?': '¿Está seguro que desea eliminar este objeto?',
+'Table name': 'Nombre de la tabla',
+'Testing application': 'Probando aplicación',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': 'La "consulta" es una condición como "db.tabla1.campo1==\'valor\'". Algo como "db.tabla1.campo1==db.tabla2.campo2" resulta en un JOIN SQL.',
+'The output of the file is a dictionary that was rendered by the view': 'La salida del archivo es un diccionario escenificado por la vista',
+'There are no controllers': 'No hay controladores',
+'There are no models': 'No hay modelos',
+'There are no modules': 'No hay módulos',
+'There are no static files': 'No hay archivos estáticos',
+'There are no translators, only default language is supported': 'No hay traductores, sólo el lenguaje por defecto es soportado',
+'There are no views': 'No hay vistas',
+'This is a copy of the scaffolding application': 'Esta es una copia de la aplicación de andamiaje',
+'This is the %(filename)s template': 'Esta es la plantilla %(filename)s',
+'Ticket': 'Tiquete',
+'Timestamp': 'Timestamp',
+'Unable to check for upgrades': 'No es posible verificar la existencia de actualizaciones',
+'Unable to download': 'No es posible la descarga',
+'Unable to download app': 'No es posible descarga la aplicación',
+'Update:': 'Actualice:',
+'Upload existing application': 'Suba esta aplicación',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Use (...)&(...) para AND, (...)|(...) para OR, y ~(...) para NOT, para crear consultas más complejas.',
+'User ID': 'ID de Usuario',
+'View': 'Vista',
+'Views': 'Vistas',
+'Welcome': 'Welcome',
+'Welcome %s': 'Bienvenido %s',
+'Welcome to web2py': 'Bienvenido a web2py',
+'Which called the function': 'La cual llamó la función',
+'YES': 'SI',
+'You are successfully running web2py': 'Usted está ejecutando web2py exitosamente',
+'You can modify this application and adapt it to your needs': 'Usted puede modificar esta aplicación y adaptarla a sus necesidades',
+'You visited the url': 'Usted visitó la url',
+'about': 'acerca de',
+'additional code for your application': 'código adicional para su aplicación',
+'admin disabled because no admin password': ' por falta de contraseña',
+'admin disabled because not supported on google app engine': 'admin deshabilitado, no es soportado en GAE',
+'admin disabled because unable to access password file': 'admin deshabilitado, imposible acceder al archivo con la contraseña',
+'and rename it (required):': 'y renombrela (requerido):',
+'and rename it:': ' y renombrelo:',
+'appadmin': 'appadmin',
+'appadmin is disabled because insecure channel': 'admin deshabilitado, el canal no es seguro',
+'application "%s" uninstalled': 'aplicación "%s" desinstalada',
+'application compiled': 'aplicación compilada',
+'application is compiled and cannot be designed': 'la aplicación está compilada y no puede ser modificada',
+'cache': 'cache',
+'cache, errors and sessions cleaned': 'cache, errores y sesiones eliminados',
+'cannot create file': 'no es posible crear archivo',
+'cannot upload file "%(filename)s"': 'no es posible subir archivo "%(filename)s"',
+'change password': 'cambie contraseña',
+'check all': 'marcar todos',
+'clean': 'limpiar',
+'Online examples': 'Ejemplos en línea',
+'Administrative interface': 'Interfaz administrativa',
+'click to check for upgrades': 'haga clic para buscar actualizaciones',
+'compile': 'compilar',
+'compiled application removed': 'aplicación compilada removida',
+'controllers': 'controladores',
+'create file with filename:': 'cree archivo con nombre:',
+'create new application:': 'nombre de la nueva aplicación:',
+'crontab': 'crontab',
+'currently saved or': 'actualmente guardado o',
+'customize me!': 'Adaptame!',
+'data uploaded': 'datos subidos',
+'database': 'base de datos',
+'database %s select': 'selección en base de datos %s',
+'database administration': 'administración base de datos',
+'db': 'db',
+'defines tables': 'define tablas',
+'delete': 'eliminar',
+'delete all checked': 'eliminar marcados',
+'design': 'modificar',
+'Documentation': 'Documentación',
+'done!': 'listo!',
+'edit': 'editar',
+'edit controller': 'editar controlador',
+'edit profile': 'editar perfil',
+'errors': 'errores',
+'export as csv file': 'exportar como archivo CSV',
+'exposes': 'expone',
+'extends': 'extiende',
+'failed to reload module': 'recarga del módulo ha fallado',
+'file "%(filename)s" created': 'archivo "%(filename)s" creado',
+'file "%(filename)s" deleted': 'archivo "%(filename)s" eliminado',
+'file "%(filename)s" uploaded': 'archivo "%(filename)s" subido',
+'file "%(filename)s" was not deleted': 'archivo "%(filename)s" no fué eliminado',
+'file "%s" of %s restored': 'archivo "%s" de %s restaurado',
+'file changed on disk': 'archivo modificado en el disco',
+'file does not exist': 'archivo no existe',
+'file saved on %(time)s': 'archivo guardado %(time)s',
+'file saved on %s': 'archivo guardado %s',
+'help': 'ayuda',
+'htmledit': 'htmledit',
+'includes': 'incluye',
+'insert new': 'inserte nuevo',
+'insert new %s': 'inserte nuevo %s',
+'internal error': 'error interno',
+'invalid password': 'contraseña inválida',
+'invalid request': 'solicitud inválida',
+'invalid ticket': 'tiquete inválido',
+'language file "%(filename)s" created/updated': 'archivo de lenguaje "%(filename)s" creado/actualizado',
+'languages': 'lenguajes',
+'languages updated': 'lenguajes actualizados',
+'loading...': 'cargando...',
+'located in the file': 'localizada en el archivo',
+'login': 'inicio de sesión',
+'logout': 'fin de sesión',
+'lost password?': '¿olvido la contraseña?',
+'merge': 'combinar',
+'models': 'modelos',
+'modules': 'módulos',
+'new application "%s" created': 'nueva aplicación "%s" creada',
+'new record inserted': 'nuevo registro insertado',
+'next 100 rows': '100 filas siguientes',
+'or import from csv file': 'o importar desde archivo CSV',
+'or provide application url:': 'o provea URL de la aplicación:',
+'pack all': 'empaquetar todo',
+'pack compiled': 'empaquete compiladas',
+'previous 100 rows': '100 filas anteriores',
+'record': 'registro',
+'record does not exist': 'el registro no existe',
+'record id': 'id de registro',
+'register': 'registrese',
+'remove compiled': 'eliminar compiladas',
+'restore': 'restaurar',
+'revert': 'revertir',
+'save': 'guardar',
+'selected': 'seleccionado(s)',
+'session expired': 'sesión expirada',
+'shell': 'shell',
+'site': 'sitio',
+'some files could not be removed': 'algunos archivos no pudieron ser removidos',
+'state': 'estado',
+'static': 'estáticos',
+'table': 'tabla',
+'test': 'probar',
+'the application logic, each URL path is mapped in one exposed function in the controller': 'la lógica de la aplicación, cada ruta URL se mapea en una función expuesta en el controlador',
+'the data representation, define database tables and sets': 'la representación de datos, define tablas y conjuntos de base de datos',
+'the presentations layer, views are also known as templates': 'la capa de presentación, las vistas también son llamadas plantillas',
+'these files are served without processing, your images go here': 'estos archivos son servidos sin procesar, sus imágenes van aquí',
+'to  previous version.': 'a la versión previa.',
+'translation strings for the application': 'cadenas de caracteres de traducción para la aplicación',
+'try': 'intente',
+'try something like': 'intente algo como',
+'unable to create application "%s"': 'no es posible crear la aplicación "%s"',
+'unable to delete file "%(filename)s"': 'no es posible eliminar el archivo "%(filename)s"',
+'unable to parse csv file': 'no es posible analizar el archivo CSV',
+'unable to uninstall "%s"': 'no es posible instalar "%s"',
+'uncheck all': 'desmarcar todos',
+'uninstall': 'desinstalar',
+'update': 'actualizar',
+'update all languages': 'actualizar todos los lenguajes',
+'upload application:': 'subir aplicación:',
+'upload file:': 'suba archivo:',
+'versioning': 'versiones',
+'view': 'vista',
+'views': 'vistas',
+'web2py Recent Tweets': 'Tweets Recientes de web2py',
+'web2py is up to date': 'web2py está actualizado',
+}

ADDED   applications/mobileblur/languages/fr-ca.py
Index: applications/mobileblur/languages/fr-ca.py
==================================================================
--- /dev/null
+++ applications/mobileblur/languages/fr-ca.py
@@ -0,0 +1,167 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"update" est une expression optionnelle comme "champ1=\'nouvellevaleur\'". Vous ne pouvez mettre à jour ou supprimer les résultats d\'un JOIN',
+'%Y-%m-%d': '%Y-%m-%d',
+'%Y-%m-%d %H:%M:%S': '%Y-%m-%d %H:%M:%S',
+'%s rows deleted': '%s rangées supprimées',
+'%s rows updated': '%s rangées mises à jour',
+'About': 'À propos',
+'Access Control': "Contrôle d'accès",
+'Administrative interface': "Interface d'administration",
+'Ajax Recipes': 'Recettes Ajax',
+'Are you sure you want to delete this object?': 'Êtes-vous sûr de vouloir supprimer cet objet?',
+'Authentication': 'Authentification',
+'Available databases and tables': 'Bases de données et tables disponibles',
+'Buy this book': 'Acheter ce livre',
+'Cannot be empty': 'Ne peut pas être vide',
+'Check to delete': 'Cliquez pour supprimer',
+'Check to delete:': 'Cliquez pour supprimer:',
+'Client IP': 'IP client',
+'Community': 'Communauté',
+'Controller': 'Contrôleur',
+'Copyright': "Droit d'auteur",
+'Current request': 'Demande actuelle',
+'Current response': 'Réponse actuelle',
+'Current session': 'Session en cours',
+'DB Model': 'Modèle DB',
+'Database': 'Base de données',
+'Delete:': 'Supprimer:',
+'Demo': 'Démo',
+'Deployment Recipes': 'Recettes de déploiement ',
+'Description': 'Descriptif',
+'Documentation': 'Documentation',
+'Download': 'Téléchargement',
+'E-mail': 'Courriel',
+'Edit': 'Éditer',
+'Edit This App': 'Modifier cette application',
+'Edit current record': "Modifier l'enregistrement courant",
+'Errors': 'Erreurs',
+'FAQ': 'faq',
+'First name': 'Prénom',
+'Forms and Validators': 'Formulaires et Validateurs',
+'Free Applications': 'Applications gratuites',
+'Function disabled': 'Fonction désactivée',
+'Group %(group_id)s created': '%(group_id)s groupe créé',
+'Group ID': 'Groupe ID',
+'Group uniquely assigned to user %(id)s': "Groupe unique attribué à l'utilisateur %(id)s",
+'Groups': 'Groupes',
+'Hello World': 'Bonjour le monde',
+'Home': 'Accueil',
+'Import/Export': 'Importer/Exporter',
+'Index': 'Index',
+'Internal State': 'État interne',
+'Introduction': 'Présentation',
+'Invalid Query': 'Requête Invalide',
+'Invalid email': 'Courriel invalide',
+'Last name': 'Nom',
+'Layout': 'Mise en page',
+'Layouts': 'layouts',
+'Live chat': 'Clavardage en direct',
+'Logged in': 'Connecté',
+'Login': 'Connectez-vous',
+'Lost Password': 'Mot de passe perdu',
+'Main Menu': 'Menu principal',
+'Menu Model': 'Menu modèle',
+'Name': 'Nom',
+'New Record': 'Nouvel enregistrement',
+'No databases in this application': "Cette application n'a pas de bases de données",
+'Online examples': 'Exemples en ligne',
+'Origin': 'Origine',
+'Other Recipes': 'Autres recettes',
+'Overview': 'Présentation',
+'Password': 'Mot de passe',
+"Password fields don't match": 'Les mots de passe ne correspondent pas',
+'Plugins': 'Plugiciels',
+'Powered by': 'Alimenté par',
+'Preface': 'Préface',
+'Python': 'Python',
+'Query:': 'Requête:',
+'Quick Examples': 'Examples Rapides',
+'Readme': 'Lisez-moi',
+'Recipes': 'Recettes',
+'Record %(id)s created': 'Record %(id)s created',
+'Record %(id)s updated': 'Record %(id)s updated',
+'Record Created': 'Record Created',
+'Record ID': "ID d'enregistrement",
+'Record Updated': 'Record Updated',
+'Register': "S'inscrire",
+'Registration key': "Clé d'enregistrement",
+'Registration successful': 'Inscription réussie',
+'Remember me (for 30 days)': 'Se souvenir de moi (pendant 30 jours)',
+'Request reset password': 'Demande de réinitialiser le mot clé',
+'Reset Password key': 'Réinitialiser le mot clé',
+'Resources': 'Ressources',
+'Role': 'Rôle',
+'Rows in table': 'Lignes du tableau',
+'Rows selected': 'Lignes sélectionnées',
+'Semantic': 'Sémantique',
+'Services': 'Services',
+'Stylesheet': 'Feuille de style',
+'Submit': 'Soumettre',
+'Support': 'Soutien',
+'Sure you want to delete this object?': 'Êtes-vous sûr de vouloir supprimer cet objet?',
+'Table name': 'Nom du tableau',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': 'La "query" est une condition comme "db.table1.champ1==\'valeur\'". Quelque chose comme "db.table1.champ1==db.table2.champ2" résulte en un JOIN SQL.',
+'The Core': 'Le noyau',
+'The Views': 'Les Vues',
+'The output of the file is a dictionary that was rendered by the view': 'La sortie de ce fichier est un dictionnaire qui été restitué par la vue',
+'This App': 'Cette Appli',
+'This is a copy of the scaffolding application': "Ceci est une copie de l'application échafaudage",
+'Timestamp': 'Horodatage',
+'Twitter': 'Twitter',
+'Update:': 'Mise à jour:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Employez (...)&(...) pour AND, (...)|(...) pour OR, and ~(...)  pour NOT pour construire des requêtes plus complexes.',
+'User %(id)s Logged-in': 'Utilisateur %(id)s connecté',
+'User %(id)s Registered': 'Utilisateur %(id)s enregistré',
+'User ID': 'ID utilisateur',
+'User Voice': 'User Voice',
+'Verify Password': 'Vérifiez le mot de passe',
+'Videos': 'Vidéos',
+'View': 'Présentation',
+'Web2py': 'Web2py',
+'Welcome': 'Bienvenu',
+'Welcome %s': 'Bienvenue %s',
+'Welcome to web2py': 'Bienvenue à web2py',
+'Which called the function': 'Qui a appelé la fonction',
+'You are successfully running web2py': 'Vous roulez avec succès web2py',
+'You can modify this application and adapt it to your needs': "Vous pouvez modifier cette application et l'adapter à vos besoins",
+'You visited the url': "Vous avez visité l'URL",
+'about': 'à propos',
+'appadmin is disabled because insecure channel': "appadmin est désactivée parce que le canal n'est pas sécurisé",
+'cache': 'cache',
+'change password': 'changer le mot de passe',
+'customize me!': 'personnalisez-moi!',
+'data uploaded': 'données téléchargées',
+'database': 'base de données',
+'database %s select': 'base de données %s select',
+'db': 'db',
+'design': 'design',
+'done!': 'fait!',
+'edit profile': 'modifier le profil',
+'enter an integer between %(min)g and %(max)g': 'entrer un entier compris entre %(min)g et %(max)g',
+'export as csv file': 'exporter sous forme de fichier csv',
+'insert new': 'insérer un nouveau',
+'insert new %s': 'insérer un nouveau %s',
+'invalid request': 'requête invalide',
+'located in the file': 'se trouvant dans le fichier',
+'login': 'connectez-vous',
+'logout': 'déconnectez-vous',
+'lost password': 'mot de passe perdu',
+'lost password?': 'mot de passe perdu?',
+'new record inserted': 'nouvel enregistrement inséré',
+'next 100 rows': '100 prochaines lignes',
+'or import from csv file': "ou importer d'un fichier CSV",
+'password': 'mot de passe',
+'please input your password again': "S'il vous plaît entrer votre mot de passe",
+'previous 100 rows': '100 lignes précédentes',
+'profile': 'profile',
+'record': 'enregistrement',
+'record does not exist': "l'archive n'existe pas",
+'record id': "id d'enregistrement",
+'register': "s'inscrire",
+'selected': 'sélectionné',
+'state': 'état',
+'table': 'tableau',
+'unable to parse csv file': "incapable d'analyser le fichier cvs",
+'value already in database or empty': 'valeur déjà dans la base ou vide',
+}

ADDED   applications/mobileblur/languages/fr-fr.py
Index: applications/mobileblur/languages/fr-fr.py
==================================================================
--- /dev/null
+++ applications/mobileblur/languages/fr-fr.py
@@ -0,0 +1,155 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"update" est une expression optionnelle comme "champ1=\'nouvellevaleur\'". Vous ne pouvez mettre à jour ou supprimer les résultats d\'un JOIN',
+'%Y-%m-%d': '%Y-%m-%d',
+'%Y-%m-%d %H:%M:%S': '%Y-%m-%d %H:%M:%S',
+'%s rows deleted': '%s rangées supprimées',
+'%s rows updated': '%s rangées mises à jour',
+'About': 'À propos',
+'Access Control': 'Contrôle d\'accès',
+'Ajax Recipes': 'Recettes Ajax',
+'Are you sure you want to delete this object?': 'Êtes-vous sûr de vouloir supprimer cet objet?',
+'Authentication': 'Authentification',
+'Available databases and tables': 'Bases de données et tables disponibles',
+'Buy this book': 'Acheter ce livre',
+'Cannot be empty': 'Ne peut pas être vide',
+'Check to delete': 'Cliquez pour supprimer',
+'Check to delete:': 'Cliquez pour supprimer:',
+'Client IP': 'IP client',
+'Community': 'Communauté',
+'Controller': 'Contrôleur',
+'Copyright': 'Copyright',
+'Current request': 'Demande actuelle',
+'Current response': 'Réponse actuelle',
+'Current session': 'Session en cours',
+'DB Model': 'Modèle DB',
+'Database': 'Base de données',
+'Delete:': 'Supprimer:',
+'Demo': 'Démo',
+'Deployment Recipes': 'Recettes de déploiement',
+'Description': 'Description',
+'Documentation': 'Documentation',
+'Download': 'Téléchargement',
+'E-mail': 'E-mail',
+'Edit': 'Éditer',
+'Edit This App': 'Modifier cette application',
+'Edit current record': "Modifier l'enregistrement courant",
+'Errors': 'Erreurs',
+'FAQ': 'FAQ',
+'First name': 'Prénom',
+'Forms and Validators': 'Formulaires et Validateurs',
+'Free Applications': 'Applications gratuites',
+'Function disabled': 'Fonction désactivée',
+'Group ID': 'Groupe ID',
+'Groups': 'Groups',
+'Hello World': 'Bonjour le monde',
+'Home': 'Accueil',
+'Import/Export': 'Importer/Exporter',
+'Index': 'Index',
+'Internal State': 'État interne',
+'Introduction': 'Introduction',
+'Invalid Query': 'Requête Invalide',
+'Invalid email': 'E-mail invalide',
+'Last name': 'Nom',
+'Layout': 'Mise en page',
+'Layouts': 'Layouts',
+'Live chat': 'Chat live',
+'Login': 'Connectez-vous',
+'Lost Password': 'Mot de passe perdu',
+'Main Menu': 'Menu principal',
+'Menu Model': 'Menu modèle',
+'Name': 'Nom',
+'New Record': 'Nouvel enregistrement',
+'No databases in this application': "Cette application n'a pas de bases de données",
+'Origin': 'Origine',
+'Other Recipes': 'Autres recettes',
+'Overview': 'Présentation',
+'Password': 'Mot de passe',
+"Password fields don't match": 'Les mots de passe ne correspondent pas',
+'Plugins': 'Plugiciels',
+'Powered by': 'Alimenté par',
+'Preface': 'Préface',
+'Python': 'Python',
+'Query:': 'Requête:',
+'Quick Examples': 'Examples Rapides',
+'Recipes': 'Recettes',
+'Record ID': 'ID d\'enregistrement',
+'Register': "S'inscrire",
+'Registration key': "Clé d'enregistrement",
+'Remember me (for 30 days)': 'Se souvenir de moi (pendant 30 jours)',
+'Request reset password': 'Demande de réinitialiser le mot clé',
+'Reset Password key': 'Réinitialiser le mot clé',
+'Resources': 'Ressources',
+'Role': 'Rôle',
+'Rows in table': 'Lignes du tableau',
+'Rows selected': 'Lignes sélectionnées',
+'Semantic': 'Sémantique',
+'Services': 'Services',
+'Stylesheet': 'Feuille de style',
+'Submit': 'Soumettre',
+'Support': 'Support',
+'Sure you want to delete this object?': 'Êtes-vous sûr de vouloir supprimer cet objet?',
+'Table name': 'Nom du tableau',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': 'La "query" est une condition comme "db.table1.champ1==\'valeur\'". Quelque chose comme "db.table1.champ1==db.table2.champ2" résulte en un JOIN SQL.',
+'The Core': 'Le noyau',
+'The Views': 'Les Vues',
+'The output of the file is a dictionary that was rendered by the view': 'La sortie de ce fichier est un dictionnaire qui été restitué par la vue',
+'This App': 'Cette Appli',
+'This is a copy of the scaffolding application': 'Ceci est une copie de l\'application échafaudage',
+'Timestamp': 'Horodatage',
+'Twitter': 'Twitter',
+'Update:': 'Mise à jour:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Employez (...)&(...) pour AND, (...)|(...) pour OR, and ~(...)  pour NOT pour construire des requêtes plus complexes.',
+'User %(id)s Logged-in': 'Utilisateur %(id)s connecté',
+'User %(id)s Registered': 'Utilisateur %(id)s enregistré',
+'User ID': 'ID utilisateur',
+'User Voice': 'User Voice',
+'Verify Password': 'Vérifiez le mot de passe',
+'Videos': 'Vidéos',
+'View': 'Présentation',
+'Web2py': 'Web2py',
+'Welcome': 'Bienvenu',
+'Welcome %s': 'Bienvenue %s',
+'Welcome to web2py': 'Bienvenue à web2py',
+'Which called the function': 'Qui a appelé la fonction',
+'You are successfully running web2py': 'Vous roulez avec succès web2py',
+'You can modify this application and adapt it to your needs': 'Vous pouvez modifier cette application et l\'adapter à vos besoins',
+'You visited the url': 'Vous avez visité l\'URL',
+'appadmin is disabled because insecure channel': "appadmin est désactivée parce que le canal n'est pas sécurisé",
+'cache': 'cache',
+'change password': 'changer le mot de passe',
+'Online examples': 'Exemples en ligne',
+'Administrative interface': "Interface d'administration",
+'customize me!': 'personnalisez-moi!',
+'data uploaded': 'données téléchargées',
+'database': 'base de données',
+'database %s select': 'base de données %s select',
+'db': 'db',
+'design': 'design',
+'Documentation': 'Documentation',
+'done!': 'fait!',
+'edit profile': 'modifier le profil',
+'enter an integer between %(min)g and %(max)g': 'enter an integer between %(min)g and %(max)g',
+'export as csv file': 'exporter sous forme de fichier csv',
+'insert new': 'insérer un nouveau',
+'insert new %s': 'insérer un nouveau %s',
+'invalid request': 'requête invalide',
+'located in the file': 'se trouvant dans le fichier',
+'login': 'connectez-vous',
+'logout': 'déconnectez-vous',
+'lost password': 'mot de passe perdu',
+'lost password?': 'mot de passe perdu?',
+'new record inserted': 'nouvel enregistrement inséré',
+'next 100 rows': '100 prochaines lignes',
+'or import from csv file': "ou importer d'un fichier CSV",
+'previous 100 rows': '100 lignes précédentes',
+'record': 'enregistrement',
+'record does not exist': "l'archive n'existe pas",
+'record id': "id d'enregistrement",
+'register': "s'inscrire",
+'selected': 'sélectionné',
+'state': 'état',
+'table': 'tableau',
+'unable to parse csv file': "incapable d'analyser le fichier cvs",
+'Readme': "Lisez-moi",
+}

ADDED   applications/mobileblur/languages/hi-hi.py
Index: applications/mobileblur/languages/hi-hi.py
==================================================================
--- /dev/null
+++ applications/mobileblur/languages/hi-hi.py
@@ -0,0 +1,82 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN',
+'%Y-%m-%d': '%Y-%m-%d',
+'%Y-%m-%d %H:%M:%S': '%Y-%m-%d %H:%M:%S',
+'%s rows deleted': '%s \xe0\xa4\xaa\xe0\xa4\x82\xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa4\xbf\xe0\xa4\xaf\xe0\xa4\xbe\xe0\xa4\x81 \xe0\xa4\xae\xe0\xa4\xbf\xe0\xa4\x9f\xe0\xa4\xbe\xe0\xa4\x8f\xe0\xa4\x81',
+'%s rows updated': '%s \xe0\xa4\xaa\xe0\xa4\x82\xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa4\xbf\xe0\xa4\xaf\xe0\xa4\xbe\xe0\xa4\x81  \xe0\xa4\x85\xe0\xa4\xa6\xe0\xa5\x8d\xe0\xa4\xaf\xe0\xa4\xa4\xe0\xa4\xa8',
+'Available databases and tables': '\xe0\xa4\x89\xe0\xa4\xaa\xe0\xa4\xb2\xe0\xa4\xac\xe0\xa5\x8d\xe0\xa4\xa7  \xe0\xa4\xa1\xe0\xa5\x87\xe0\xa4\x9f\xe0\xa4\xbe\xe0\xa4\xac\xe0\xa5\x87\xe0\xa4\xb8 \xe0\xa4\x94\xe0\xa4\xb0 \xe0\xa4\xa4\xe0\xa4\xbe\xe0\xa4\xb2\xe0\xa4\xbf\xe0\xa4\x95\xe0\xa4\xbe',
+'Cannot be empty': '\xe0\xa4\x96\xe0\xa4\xbe\xe0\xa4\xb2\xe0\xa5\x80 \xe0\xa4\xa8\xe0\xa4\xb9\xe0\xa5\x80\xe0\xa4\x82 \xe0\xa4\xb9\xe0\xa5\x8b \xe0\xa4\xb8\xe0\xa4\x95\xe0\xa4\xa4\xe0\xa4\xbe',
+'Change Password': '\xe0\xa4\xaa\xe0\xa4\xbe\xe0\xa4\xb8\xe0\xa4\xb5\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa1 \xe0\xa4\xac\xe0\xa4\xa6\xe0\xa4\xb2\xe0\xa5\x87\xe0\xa4\x82',
+'Check to delete': '\xe0\xa4\xb9\xe0\xa4\x9f\xe0\xa4\xbe\xe0\xa4\xa8\xe0\xa5\x87 \xe0\xa4\x95\xe0\xa5\x87 \xe0\xa4\xb2\xe0\xa4\xbf\xe0\xa4\x8f \xe0\xa4\x9a\xe0\xa5\x81\xe0\xa4\xa8\xe0\xa5\x87\xe0\xa4\x82',
+'Controller': 'Controller',
+'Copyright': 'Copyright',
+'Current request': '\xe0\xa4\xb5\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa4\xae\xe0\xa4\xbe\xe0\xa4\xa8 \xe0\xa4\x85\xe0\xa4\xa8\xe0\xa5\x81\xe0\xa4\xb0\xe0\xa5\x8b\xe0\xa4\xa7',
+'Current response': '\xe0\xa4\xb5\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa4\xae\xe0\xa4\xbe\xe0\xa4\xa8 \xe0\xa4\xaa\xe0\xa5\x8d\xe0\xa4\xb0\xe0\xa4\xa4\xe0\xa4\xbf\xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xb0\xe0\xa4\xbf\xe0\xa4\xaf\xe0\xa4\xbe',
+'Current session': '\xe0\xa4\xb5\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa4\xae\xe0\xa4\xbe\xe0\xa4\xa8 \xe0\xa4\xb8\xe0\xa5\x87\xe0\xa4\xb6\xe0\xa4\xa8',
+'DB Model': 'DB Model',
+'Database': 'Database',
+'Delete:': '\xe0\xa4\xae\xe0\xa4\xbf\xe0\xa4\x9f\xe0\xa4\xbe\xe0\xa4\xa8\xe0\xa4\xbe:',
+'Edit': 'Edit',
+'Edit Profile': '\xe0\xa4\xaa\xe0\xa5\x8d\xe0\xa4\xb0\xe0\xa5\x8b\xe0\xa4\xab\xe0\xa4\xbc\xe0\xa4\xbe\xe0\xa4\x87\xe0\xa4\xb2 \xe0\xa4\xb8\xe0\xa4\x82\xe0\xa4\xaa\xe0\xa4\xbe\xe0\xa4\xa6\xe0\xa4\xbf\xe0\xa4\xa4 \xe0\xa4\x95\xe0\xa4\xb0\xe0\xa5\x87\xe0\xa4\x82',
+'Edit This App': 'Edit This App',
+'Edit current record': '\xe0\xa4\xb5\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa4\xae\xe0\xa4\xbe\xe0\xa4\xa8 \xe0\xa4\xb0\xe0\xa5\x87\xe0\xa4\x95\xe0\xa5\x89\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa1 \xe0\xa4\xb8\xe0\xa4\x82\xe0\xa4\xaa\xe0\xa4\xbe\xe0\xa4\xa6\xe0\xa4\xbf\xe0\xa4\xa4 \xe0\xa4\x95\xe0\xa4\xb0\xe0\xa5\x87\xe0\xa4\x82 ',
+'Hello World': 'Hello World',
+'Hello from MyApp': 'Hello from MyApp',
+'Import/Export': '\xe0\xa4\x86\xe0\xa4\xaf\xe0\xa4\xbe\xe0\xa4\xa4 / \xe0\xa4\xa8\xe0\xa4\xbf\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xaf\xe0\xa4\xbe\xe0\xa4\xa4',
+'Index': 'Index',
+'Internal State': '\xe0\xa4\x86\xe0\xa4\x82\xe0\xa4\xa4\xe0\xa4\xb0\xe0\xa4\xbf\xe0\xa4\x95  \xe0\xa4\xb8\xe0\xa5\x8d\xe0\xa4\xa5\xe0\xa4\xbf\xe0\xa4\xa4\xe0\xa4\xbf',
+'Invalid Query': '\xe0\xa4\x85\xe0\xa4\xae\xe0\xa4\xbe\xe0\xa4\xa8\xe0\xa5\x8d\xe0\xa4\xaf  \xe0\xa4\xaa\xe0\xa5\x8d\xe0\xa4\xb0\xe0\xa4\xb6\xe0\xa5\x8d\xe0\xa4\xa8',
+'Layout': 'Layout',
+'Login': '\xe0\xa4\xb2\xe0\xa5\x89\xe0\xa4\x97 \xe0\xa4\x87\xe0\xa4\xa8',
+'Logout': '\xe0\xa4\xb2\xe0\xa5\x89\xe0\xa4\x97 \xe0\xa4\x86\xe0\xa4\x89\xe0\xa4\x9f',
+'Lost Password': '\xe0\xa4\xaa\xe0\xa4\xbe\xe0\xa4\xb8\xe0\xa4\xb5\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa1 \xe0\xa4\x96\xe0\xa5\x8b \xe0\xa4\x97\xe0\xa4\xaf\xe0\xa4\xbe',
+'Main Menu': 'Main Menu',
+'Menu Model': 'Menu Model',
+'New Record': '\xe0\xa4\xa8\xe0\xa4\xaf\xe0\xa4\xbe \xe0\xa4\xb0\xe0\xa5\x87\xe0\xa4\x95\xe0\xa5\x89\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa1',
+'No databases in this application': '\xe0\xa4\x87\xe0\xa4\xb8  \xe0\xa4\x85\xe0\xa4\xa8\xe0\xa5\x81\xe0\xa4\xaa\xe0\xa5\x8d\xe0\xa4\xb0\xe0\xa4\xaf\xe0\xa5\x8b\xe0\xa4\x97 \xe0\xa4\xae\xe0\xa5\x87\xe0\xa4\x82 \xe0\xa4\x95\xe0\xa5\x8b\xe0\xa4\x88 \xe0\xa4\xa1\xe0\xa5\x87\xe0\xa4\x9f\xe0\xa4\xbe\xe0\xa4\xac\xe0\xa5\x87\xe0\xa4\xb8 \xe0\xa4\xa8\xe0\xa4\xb9\xe0\xa5\x80\xe0\xa4\x82 \xe0\xa4\xb9\xe0\xa5\x88\xe0\xa4\x82',
+'Powered by': 'Powered by',
+'Query:': '\xe0\xa4\xaa\xe0\xa5\x8d\xe0\xa4\xb0\xe0\xa4\xb6\xe0\xa5\x8d\xe0\xa4\xa8:',
+'Register': '\xe0\xa4\xaa\xe0\xa4\x82\xe0\xa4\x9c\xe0\xa5\x80\xe0\xa4\x95\xe0\xa5\x83\xe0\xa4\xa4 (\xe0\xa4\xb0\xe0\xa4\x9c\xe0\xa4\xbf\xe0\xa4\xb8\xe0\xa5\x8d\xe0\xa4\x9f\xe0\xa4\xb0) \xe0\xa4\x95\xe0\xa4\xb0\xe0\xa4\xa8\xe0\xa4\xbe ',
+'Rows in table': '\xe0\xa4\xa4\xe0\xa4\xbe\xe0\xa4\xb2\xe0\xa4\xbf\xe0\xa4\x95\xe0\xa4\xbe \xe0\xa4\xae\xe0\xa5\x87\xe0\xa4\x82 \xe0\xa4\xaa\xe0\xa4\x82\xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa4\xbf\xe0\xa4\xaf\xe0\xa4\xbe\xe0\xa4\x81 ',
+'Rows selected': '\xe0\xa4\x9a\xe0\xa4\xaf\xe0\xa4\xa8\xe0\xa4\xbf\xe0\xa4\xa4 (\xe0\xa4\x9a\xe0\xa5\x81\xe0\xa4\xa8\xe0\xa5\x87 \xe0\xa4\x97\xe0\xa4\xaf\xe0\xa5\x87) \xe0\xa4\xaa\xe0\xa4\x82\xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa4\xbf\xe0\xa4\xaf\xe0\xa4\xbe\xe0\xa4\x81 ',
+'Stylesheet': 'Stylesheet',
+'Sure you want to delete this object?': '\xe0\xa4\xb8\xe0\xa5\x81\xe0\xa4\xa8\xe0\xa4\xbf\xe0\xa4\xb6\xe0\xa5\x8d\xe0\xa4\x9a\xe0\xa4\xbf\xe0\xa4\xa4 \xe0\xa4\xb9\xe0\xa5\x88\xe0\xa4\x82 \xe0\xa4\x95\xe0\xa4\xbf \xe0\xa4\x86\xe0\xa4\xaa \xe0\xa4\x87\xe0\xa4\xb8 \xe0\xa4\xb5\xe0\xa4\xb8\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa5\x81 \xe0\xa4\x95\xe0\xa5\x8b \xe0\xa4\xb9\xe0\xa4\x9f\xe0\xa4\xbe\xe0\xa4\xa8\xe0\xa4\xbe \xe0\xa4\x9a\xe0\xa4\xbe\xe0\xa4\xb9\xe0\xa4\xa4\xe0\xa5\x87 \xe0\xa4\xb9\xe0\xa5\x88\xe0\xa4\x82?',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': 'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.',
+'Update:': '\xe0\xa4\x85\xe0\xa4\xa6\xe0\xa5\x8d\xe0\xa4\xaf\xe0\xa4\xa4\xe0\xa4\xa8 \xe0\xa4\x95\xe0\xa4\xb0\xe0\xa4\xa8\xe0\xa4\xbe:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.',
+'View': 'View',
+'Welcome %s': 'Welcome %s',
+'Welcome to web2py': '\xe0\xa4\xb5\xe0\xa5\x87\xe0\xa4\xac\xe0\xa5\xa8\xe0\xa4\xaa\xe0\xa4\xbe\xe0\xa4\x87 (web2py)  \xe0\xa4\xae\xe0\xa5\x87\xe0\xa4\x82 \xe0\xa4\x86\xe0\xa4\xaa\xe0\xa4\x95\xe0\xa4\xbe \xe0\xa4\xb8\xe0\xa5\x8d\xe0\xa4\xb5\xe0\xa4\xbe\xe0\xa4\x97\xe0\xa4\xa4 \xe0\xa4\xb9\xe0\xa5\x88',
+'appadmin is disabled because insecure channel': '\xe0\xa4\x85\xe0\xa4\xaa \xe0\xa4\x86\xe0\xa4\xa1\xe0\xa4\xae\xe0\xa4\xbf\xe0\xa4\xa8 (appadmin) \xe0\xa4\x85\xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xb7\xe0\xa4\xae \xe0\xa4\xb9\xe0\xa5\x88 \xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xaf\xe0\xa5\x8b\xe0\xa4\x82\xe0\xa4\x95\xe0\xa4\xbf \xe0\xa4\x85\xe0\xa4\xb8\xe0\xa5\x81\xe0\xa4\xb0\xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xb7\xe0\xa4\xbf\xe0\xa4\xa4 \xe0\xa4\x9a\xe0\xa5\x88\xe0\xa4\xa8\xe0\xa4\xb2',
+'cache': 'cache',
+'change password': 'change password',
+'Online examples': '\xe0\xa4\x91\xe0\xa4\xa8\xe0\xa4\xb2\xe0\xa4\xbe\xe0\xa4\x87\xe0\xa4\xa8 \xe0\xa4\x89\xe0\xa4\xa6\xe0\xa4\xbe\xe0\xa4\xb9\xe0\xa4\xb0\xe0\xa4\xa3 \xe0\xa4\x95\xe0\xa5\x87 \xe0\xa4\xb2\xe0\xa4\xbf\xe0\xa4\x8f \xe0\xa4\xaf\xe0\xa4\xb9\xe0\xa4\xbe\xe0\xa4\x81 \xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xb2\xe0\xa4\xbf\xe0\xa4\x95 \xe0\xa4\x95\xe0\xa4\xb0\xe0\xa5\x87\xe0\xa4\x82',
+'Administrative interface': '\xe0\xa4\xaa\xe0\xa5\x8d\xe0\xa4\xb0\xe0\xa4\xb6\xe0\xa4\xbe\xe0\xa4\xb8\xe0\xa4\xa8\xe0\xa4\xbf\xe0\xa4\x95 \xe0\xa4\x87\xe0\xa4\x82\xe0\xa4\x9f\xe0\xa4\xb0\xe0\xa4\xab\xe0\xa5\x87\xe0\xa4\xb8 \xe0\xa4\x95\xe0\xa5\x87 \xe0\xa4\xb2\xe0\xa4\xbf\xe0\xa4\x8f \xe0\xa4\xaf\xe0\xa4\xb9\xe0\xa4\xbe\xe0\xa4\x81 \xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xb2\xe0\xa4\xbf\xe0\xa4\x95 \xe0\xa4\x95\xe0\xa4\xb0\xe0\xa5\x87\xe0\xa4\x82',
+'customize me!': '\xe0\xa4\xae\xe0\xa5\x81\xe0\xa4\x9d\xe0\xa5\x87 \xe0\xa4\x85\xe0\xa4\xa8\xe0\xa5\x81\xe0\xa4\x95\xe0\xa5\x82\xe0\xa4\xb2\xe0\xa4\xbf\xe0\xa4\xa4 (\xe0\xa4\x95\xe0\xa4\xb8\xe0\xa5\x8d\xe0\xa4\x9f\xe0\xa4\xae\xe0\xa4\xbe\xe0\xa4\x87\xe0\xa4\x9c\xe0\xa4\xbc) \xe0\xa4\x95\xe0\xa4\xb0\xe0\xa5\x87\xe0\xa4\x82!',
+'data uploaded': '\xe0\xa4\xa1\xe0\xa4\xbe\xe0\xa4\x9f\xe0\xa4\xbe \xe0\xa4\x85\xe0\xa4\xaa\xe0\xa4\xb2\xe0\xa5\x8b\xe0\xa4\xa1 \xe0\xa4\xb8\xe0\xa4\xae\xe0\xa5\x8d\xe0\xa4\xaa\xe0\xa4\xa8\xe0\xa5\x8d\xe0\xa4\xa8 ',
+'database': '\xe0\xa4\xa1\xe0\xa5\x87\xe0\xa4\x9f\xe0\xa4\xbe\xe0\xa4\xac\xe0\xa5\x87\xe0\xa4\xb8',
+'database %s select': '\xe0\xa4\xa1\xe0\xa5\x87\xe0\xa4\x9f\xe0\xa4\xbe\xe0\xa4\xac\xe0\xa5\x87\xe0\xa4\xb8  %s \xe0\xa4\x9a\xe0\xa5\x81\xe0\xa4\xa8\xe0\xa5\x80 \xe0\xa4\xb9\xe0\xa5\x81\xe0\xa4\x88',
+'db': 'db',
+'design': '\xe0\xa4\xb0\xe0\xa4\x9a\xe0\xa4\xa8\xe0\xa4\xbe \xe0\xa4\x95\xe0\xa4\xb0\xe0\xa5\x87\xe0\xa4\x82',
+'done!': '\xe0\xa4\xb9\xe0\xa5\x8b \xe0\xa4\x97\xe0\xa4\xaf\xe0\xa4\xbe!',
+'edit profile': 'edit profile',
+'export as csv file': 'csv \xe0\xa4\xab\xe0\xa4\xbc\xe0\xa4\xbe\xe0\xa4\x87\xe0\xa4\xb2 \xe0\xa4\x95\xe0\xa5\x87 \xe0\xa4\xb0\xe0\xa5\x82\xe0\xa4\xaa \xe0\xa4\xae\xe0\xa5\x87\xe0\xa4\x82 \xe0\xa4\xa8\xe0\xa4\xbf\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xaf\xe0\xa4\xbe\xe0\xa4\xa4',
+'insert new': '\xe0\xa4\xa8\xe0\xa4\xaf\xe0\xa4\xbe \xe0\xa4\xa1\xe0\xa4\xbe\xe0\xa4\xb2\xe0\xa5\x87\xe0\xa4\x82',
+'insert new %s': '\xe0\xa4\xa8\xe0\xa4\xaf\xe0\xa4\xbe   %s  \xe0\xa4\xa1\xe0\xa4\xbe\xe0\xa4\xb2\xe0\xa5\x87\xe0\xa4\x82',
+'invalid request': '\xe0\xa4\x85\xe0\xa4\xb5\xe0\xa5\x88\xe0\xa4\xa7 \xe0\xa4\x85\xe0\xa4\xa8\xe0\xa5\x81\xe0\xa4\xb0\xe0\xa5\x8b\xe0\xa4\xa7',
+'login': 'login',
+'logout': 'logout',
+'new record inserted': '\xe0\xa4\xa8\xe0\xa4\xaf\xe0\xa4\xbe \xe0\xa4\xb0\xe0\xa5\x87\xe0\xa4\x95\xe0\xa5\x89\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa1 \xe0\xa4\xa1\xe0\xa4\xbe\xe0\xa4\xb2\xe0\xa4\xbe',
+'next 100 rows': '\xe0\xa4\x85\xe0\xa4\x97\xe0\xa4\xb2\xe0\xa5\x87 100 \xe0\xa4\xaa\xe0\xa4\x82\xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa4\xbf\xe0\xa4\xaf\xe0\xa4\xbe\xe0\xa4\x81',
+'or import from csv file': '\xe0\xa4\xaf\xe0\xa4\xbe  csv \xe0\xa4\xab\xe0\xa4\xbc\xe0\xa4\xbe\xe0\xa4\x87\xe0\xa4\xb2 \xe0\xa4\xb8\xe0\xa5\x87 \xe0\xa4\x86\xe0\xa4\xaf\xe0\xa4\xbe\xe0\xa4\xa4',
+'previous 100 rows': '\xe0\xa4\xaa\xe0\xa4\xbf\xe0\xa4\x9b\xe0\xa4\xb2\xe0\xa5\x87 100 \xe0\xa4\xaa\xe0\xa4\x82\xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa4\xbf\xe0\xa4\xaf\xe0\xa4\xbe\xe0\xa4\x81',
+'record': 'record',
+'record does not exist': '\xe0\xa4\xb0\xe0\xa4\xbf\xe0\xa4\x95\xe0\xa5\x89\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa1 \xe0\xa4\xae\xe0\xa5\x8c\xe0\xa4\x9c\xe0\xa5\x82\xe0\xa4\xa6 \xe0\xa4\xa8\xe0\xa4\xb9\xe0\xa5\x80\xe0\xa4\x82 \xe0\xa4\xb9\xe0\xa5\x88',
+'record id': '\xe0\xa4\xb0\xe0\xa4\xbf\xe0\xa4\x95\xe0\xa5\x89\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa1 \xe0\xa4\xaa\xe0\xa4\xb9\xe0\xa4\x9a\xe0\xa4\xbe\xe0\xa4\xa8\xe0\xa4\x95\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa4\xbe (\xe0\xa4\x86\xe0\xa4\x88\xe0\xa4\xa1\xe0\xa5\x80)',
+'register': 'register',
+'selected': '\xe0\xa4\x9a\xe0\xa5\x81\xe0\xa4\xa8\xe0\xa4\xbe \xe0\xa4\xb9\xe0\xa5\x81\xe0\xa4\x86',
+'state': '\xe0\xa4\xb8\xe0\xa5\x8d\xe0\xa4\xa5\xe0\xa4\xbf\xe0\xa4\xa4\xe0\xa4\xbf',
+'table': '\xe0\xa4\xa4\xe0\xa4\xbe\xe0\xa4\xb2\xe0\xa4\xbf\xe0\xa4\x95\xe0\xa4\xbe',
+'unable to parse csv file': 'csv \xe0\xa4\xab\xe0\xa4\xbc\xe0\xa4\xbe\xe0\xa4\x87\xe0\xa4\xb2 \xe0\xa4\xaa\xe0\xa4\xbe\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xb8 \xe0\xa4\x95\xe0\xa4\xb0\xe0\xa4\xa8\xe0\xa5\x87 \xe0\xa4\xae\xe0\xa5\x87\xe0\xa4\x82 \xe0\xa4\x85\xe0\xa4\xb8\xe0\xa4\xae\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa5',
+}

ADDED   applications/mobileblur/languages/hu-hu.py
Index: applications/mobileblur/languages/hu-hu.py
==================================================================
--- /dev/null
+++ applications/mobileblur/languages/hu-hu.py
@@ -0,0 +1,93 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN',
+'%Y-%m-%d': '%Y.%m.%d.',
+'%Y-%m-%d %H:%M:%S': '%Y.%m.%d. %H:%M:%S',
+'%s rows deleted': '%s sorok t\xc3\xb6rl\xc5\x91dtek',
+'%s rows updated': '%s sorok friss\xc3\xadt\xc5\x91dtek',
+'Available databases and tables': 'El\xc3\xa9rhet\xc5\x91 adatb\xc3\xa1zisok \xc3\xa9s t\xc3\xa1bl\xc3\xa1k',
+'Cannot be empty': 'Nem lehet \xc3\xbcres',
+'Check to delete': 'T\xc3\xb6rl\xc3\xa9shez v\xc3\xa1laszd ki',
+'Client IP': 'Client IP',
+'Controller': 'Controller',
+'Copyright': 'Copyright',
+'Current request': 'Jelenlegi lek\xc3\xa9rdez\xc3\xa9s',
+'Current response': 'Jelenlegi v\xc3\xa1lasz',
+'Current session': 'Jelenlegi folyamat',
+'DB Model': 'DB Model',
+'Database': 'Adatb\xc3\xa1zis',
+'Delete:': 'T\xc3\xb6r\xc3\xb6l:',
+'Description': 'Description',
+'E-mail': 'E-mail',
+'Edit': 'Szerkeszt',
+'Edit This App': 'Alkalmaz\xc3\xa1st szerkeszt',
+'Edit current record': 'Aktu\xc3\xa1lis bejegyz\xc3\xa9s szerkeszt\xc3\xa9se',
+'First name': 'First name',
+'Group ID': 'Group ID',
+'Hello World': 'Hello Vil\xc3\xa1g',
+'Import/Export': 'Import/Export',
+'Index': 'Index',
+'Internal State': 'Internal State',
+'Invalid Query': 'Hib\xc3\xa1s lek\xc3\xa9rdez\xc3\xa9s',
+'Invalid email': 'Invalid email',
+'Last name': 'Last name',
+'Layout': 'Szerkezet',
+'Main Menu': 'F\xc5\x91men\xc3\xbc',
+'Menu Model': 'Men\xc3\xbc model',
+'Name': 'Name',
+'New Record': '\xc3\x9aj bejegyz\xc3\xa9s',
+'No databases in this application': 'Nincs adatb\xc3\xa1zis ebben az alkalmaz\xc3\xa1sban',
+'Origin': 'Origin',
+'Password': 'Password',
+'Powered by': 'Powered by',
+'Query:': 'Lek\xc3\xa9rdez\xc3\xa9s:',
+'Record ID': 'Record ID',
+'Registration key': 'Registration key',
+'Reset Password key': 'Reset Password key',
+'Role': 'Role',
+'Rows in table': 'Sorok a t\xc3\xa1bl\xc3\xa1ban',
+'Rows selected': 'Kiv\xc3\xa1lasztott sorok',
+'Stylesheet': 'Stylesheet',
+'Sure you want to delete this object?': 'Biztos t\xc3\xb6rli ezt az objektumot?',
+'Table name': 'Table name',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': 'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.',
+'Timestamp': 'Timestamp',
+'Update:': 'Friss\xc3\xadt:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.',
+'User ID': 'User ID',
+'View': 'N\xc3\xa9zet',
+'Welcome %s': 'Welcome %s',
+'Welcome to web2py': 'Isten hozott a web2py-ban',
+'appadmin is disabled because insecure channel': 'az appadmin a biztons\xc3\xa1gtalan csatorna miatt letiltva',
+'cache': 'gyors\xc3\xadt\xc3\xb3t\xc3\xa1r',
+'change password': 'jelsz\xc3\xb3 megv\xc3\xa1ltoztat\xc3\xa1sa',
+'Online examples': 'online p\xc3\xa9ld\xc3\xa1k\xc3\xa9rt kattints ide',
+'Administrative interface': 'az adminisztr\xc3\xa1ci\xc3\xb3s fel\xc3\xbclet\xc3\xa9rt kattints ide',
+'customize me!': 'v\xc3\xa1ltoztass meg!',
+'data uploaded': 'adat felt\xc3\xb6ltve',
+'database': 'adatb\xc3\xa1zis',
+'database %s select': 'adatb\xc3\xa1zis %s kiv\xc3\xa1laszt\xc3\xa1s',
+'db': 'db',
+'design': 'design',
+'done!': 'k\xc3\xa9sz!',
+'edit profile': 'profil szerkeszt\xc3\xa9se',
+'export as csv file': 'export\xc3\xa1l csv f\xc3\xa1jlba',
+'insert new': '\xc3\xbaj beilleszt\xc3\xa9se',
+'insert new %s': '\xc3\xbaj beilleszt\xc3\xa9se %s',
+'invalid request': 'hib\xc3\xa1s k\xc3\xa9r\xc3\xa9s',
+'login': 'bel\xc3\xa9p',
+'logout': 'kil\xc3\xa9p',
+'lost password': 'elveszett jelsz\xc3\xb3',
+'new record inserted': '\xc3\xbaj bejegyz\xc3\xa9s felv\xc3\xa9ve',
+'next 100 rows': 'k\xc3\xb6vetkez\xc5\x91 100 sor',
+'or import from csv file': 'vagy bet\xc3\xb6lt\xc3\xa9s csv f\xc3\xa1jlb\xc3\xb3l',
+'previous 100 rows': 'el\xc5\x91z\xc5\x91 100 sor',
+'record': 'bejegyz\xc3\xa9s',
+'record does not exist': 'bejegyz\xc3\xa9s nem l\xc3\xa9tezik',
+'record id': 'bejegyz\xc3\xa9s id',
+'register': 'regisztr\xc3\xa1ci\xc3\xb3',
+'selected': 'kiv\xc3\xa1lasztott',
+'state': '\xc3\xa1llapot',
+'table': 't\xc3\xa1bla',
+'unable to parse csv file': 'nem lehet a csv f\xc3\xa1jlt beolvasni',
+}

ADDED   applications/mobileblur/languages/hu.py
Index: applications/mobileblur/languages/hu.py
==================================================================
--- /dev/null
+++ applications/mobileblur/languages/hu.py
@@ -0,0 +1,93 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN',
+'%Y-%m-%d': '%Y.%m.%d.',
+'%Y-%m-%d %H:%M:%S': '%Y.%m.%d. %H:%M:%S',
+'%s rows deleted': '%s sorok t\xc3\xb6rl\xc5\x91dtek',
+'%s rows updated': '%s sorok friss\xc3\xadt\xc5\x91dtek',
+'Available databases and tables': 'El\xc3\xa9rhet\xc5\x91 adatb\xc3\xa1zisok \xc3\xa9s t\xc3\xa1bl\xc3\xa1k',
+'Cannot be empty': 'Nem lehet \xc3\xbcres',
+'Check to delete': 'T\xc3\xb6rl\xc3\xa9shez v\xc3\xa1laszd ki',
+'Client IP': 'Client IP',
+'Controller': 'Controller',
+'Copyright': 'Copyright',
+'Current request': 'Jelenlegi lek\xc3\xa9rdez\xc3\xa9s',
+'Current response': 'Jelenlegi v\xc3\xa1lasz',
+'Current session': 'Jelenlegi folyamat',
+'DB Model': 'DB Model',
+'Database': 'Adatb\xc3\xa1zis',
+'Delete:': 'T\xc3\xb6r\xc3\xb6l:',
+'Description': 'Description',
+'E-mail': 'E-mail',
+'Edit': 'Szerkeszt',
+'Edit This App': 'Alkalmaz\xc3\xa1st szerkeszt',
+'Edit current record': 'Aktu\xc3\xa1lis bejegyz\xc3\xa9s szerkeszt\xc3\xa9se',
+'First name': 'First name',
+'Group ID': 'Group ID',
+'Hello World': 'Hello Vil\xc3\xa1g',
+'Import/Export': 'Import/Export',
+'Index': 'Index',
+'Internal State': 'Internal State',
+'Invalid Query': 'Hib\xc3\xa1s lek\xc3\xa9rdez\xc3\xa9s',
+'Invalid email': 'Invalid email',
+'Last name': 'Last name',
+'Layout': 'Szerkezet',
+'Main Menu': 'F\xc5\x91men\xc3\xbc',
+'Menu Model': 'Men\xc3\xbc model',
+'Name': 'Name',
+'New Record': '\xc3\x9aj bejegyz\xc3\xa9s',
+'No databases in this application': 'Nincs adatb\xc3\xa1zis ebben az alkalmaz\xc3\xa1sban',
+'Origin': 'Origin',
+'Password': 'Password',
+'Powered by': 'Powered by',
+'Query:': 'Lek\xc3\xa9rdez\xc3\xa9s:',
+'Record ID': 'Record ID',
+'Registration key': 'Registration key',
+'Reset Password key': 'Reset Password key',
+'Role': 'Role',
+'Rows in table': 'Sorok a t\xc3\xa1bl\xc3\xa1ban',
+'Rows selected': 'Kiv\xc3\xa1lasztott sorok',
+'Stylesheet': 'Stylesheet',
+'Sure you want to delete this object?': 'Biztos t\xc3\xb6rli ezt az objektumot?',
+'Table name': 'Table name',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': 'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.',
+'Timestamp': 'Timestamp',
+'Update:': 'Friss\xc3\xadt:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.',
+'User ID': 'User ID',
+'View': 'N\xc3\xa9zet',
+'Welcome %s': 'Welcome %s',
+'Welcome to web2py': 'Isten hozott a web2py-ban',
+'appadmin is disabled because insecure channel': 'az appadmin a biztons\xc3\xa1gtalan csatorna miatt letiltva',
+'cache': 'gyors\xc3\xadt\xc3\xb3t\xc3\xa1r',
+'change password': 'jelsz\xc3\xb3 megv\xc3\xa1ltoztat\xc3\xa1sa',
+'Online examples': 'online p\xc3\xa9ld\xc3\xa1k\xc3\xa9rt kattints ide',
+'Administrative interface': 'az adminisztr\xc3\xa1ci\xc3\xb3s fel\xc3\xbclet\xc3\xa9rt kattints ide',
+'customize me!': 'v\xc3\xa1ltoztass meg!',
+'data uploaded': 'adat felt\xc3\xb6ltve',
+'database': 'adatb\xc3\xa1zis',
+'database %s select': 'adatb\xc3\xa1zis %s kiv\xc3\xa1laszt\xc3\xa1s',
+'db': 'db',
+'design': 'design',
+'done!': 'k\xc3\xa9sz!',
+'edit profile': 'profil szerkeszt\xc3\xa9se',
+'export as csv file': 'export\xc3\xa1l csv f\xc3\xa1jlba',
+'insert new': '\xc3\xbaj beilleszt\xc3\xa9se',
+'insert new %s': '\xc3\xbaj beilleszt\xc3\xa9se %s',
+'invalid request': 'hib\xc3\xa1s k\xc3\xa9r\xc3\xa9s',
+'login': 'bel\xc3\xa9p',
+'logout': 'kil\xc3\xa9p',
+'lost password': 'elveszett jelsz\xc3\xb3',
+'new record inserted': '\xc3\xbaj bejegyz\xc3\xa9s felv\xc3\xa9ve',
+'next 100 rows': 'k\xc3\xb6vetkez\xc5\x91 100 sor',
+'or import from csv file': 'vagy bet\xc3\xb6lt\xc3\xa9s csv f\xc3\xa1jlb\xc3\xb3l',
+'previous 100 rows': 'el\xc5\x91z\xc5\x91 100 sor',
+'record': 'bejegyz\xc3\xa9s',
+'record does not exist': 'bejegyz\xc3\xa9s nem l\xc3\xa9tezik',
+'record id': 'bejegyz\xc3\xa9s id',
+'register': 'regisztr\xc3\xa1ci\xc3\xb3',
+'selected': 'kiv\xc3\xa1lasztott',
+'state': '\xc3\xa1llapot',
+'table': 't\xc3\xa1bla',
+'unable to parse csv file': 'nem lehet a csv f\xc3\xa1jlt beolvasni',
+}

ADDED   applications/mobileblur/languages/it-it.py
Index: applications/mobileblur/languages/it-it.py
==================================================================
--- /dev/null
+++ applications/mobileblur/languages/it-it.py
@@ -0,0 +1,104 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"update" è un\'espressione opzionale come "campo1=\'nuovo valore\'". Non si può fare "update" o "delete" dei risultati di un JOIN ',
+'%Y-%m-%d': '%d/%m/%Y',
+'%Y-%m-%d %H:%M:%S': '%d/%m/%Y %H:%M:%S',
+'%s rows deleted': '%s righe ("record") cancellate',
+'%s rows updated': '%s righe ("record") modificate',
+'Available databases and tables': 'Database e tabelle disponibili',
+'Cannot be empty': 'Non può essere vuoto',
+'Check to delete': 'Seleziona per cancellare',
+'Client IP': 'Client IP',
+'Controller': 'Controller',
+'Copyright': 'Copyright',
+'Current request': 'Richiesta (request) corrente',
+'Current response': 'Risposta (response) corrente',
+'Current session': 'Sessione (session) corrente',
+'DB Model': 'Modello di DB',
+'Database': 'Database',
+'Delete:': 'Cancella:',
+'Description': 'Descrizione',
+'E-mail': 'E-mail',
+'Edit': 'Modifica',
+'Edit This App': 'Modifica questa applicazione',
+'Edit current record': 'Modifica record corrente',
+'First name': 'Nome',
+'Group ID': 'ID Gruppo',
+'Hello World': 'Salve Mondo',
+'Hello World in a flash!': 'Salve Mondo in un flash!',
+'Import/Export': 'Importa/Esporta',
+'Index': 'Indice',
+'Internal State': 'Stato interno',
+'Invalid Query': 'Richiesta (query) non valida',
+'Invalid email': 'Email non valida',
+'Last name': 'Cognome',
+'Layout': 'Layout',
+'Main Menu': 'Menu principale',
+'Menu Model': 'Menu Modelli',
+'Name': 'Nome',
+'New Record': 'Nuovo elemento (record)',
+'No databases in this application': 'Nessun database presente in questa applicazione',
+'Origin': 'Origine',
+'Password': 'Password',
+'Powered by': 'Powered by',
+'Query:': 'Richiesta (query):',
+'Record ID': 'Record ID',
+'Registration key': 'Chiave di Registazione',
+'Reset Password key': 'Resetta chiave Password ',
+'Role': 'Ruolo',
+'Rows in table': 'Righe nella tabella',
+'Rows selected': 'Righe selezionate',
+'Stylesheet': 'Foglio di stile (stylesheet)',
+'Sure you want to delete this object?': 'Vuoi veramente cancellare questo oggetto?',
+'Table name': 'Nome tabella',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': 'La richiesta (query) è una condizione come ad esempio  "db.tabella1.campo1==\'valore\'". Una condizione come "db.tabella1.campo1==db.tabella2.campo2" produce un "JOIN" SQL.',
+'The output of the file is a dictionary that was rendered by the view': 'L\'output del file è un "dictionary" che è stato visualizzato dalla vista',
+'This is a copy of the scaffolding application': "Questa è una copia dell'applicazione di base (scaffold)",
+'Timestamp': 'Ora (timestamp)',
+'Update:': 'Aggiorna:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Per costruire richieste (query) più complesse si usano (...)&(...) come "e" (AND), (...)|(...) come "o" (OR), e ~(...) come negazione (NOT).',
+'User ID': 'ID Utente',
+'View': 'Vista',
+'Welcome %s': 'Benvenuto %s',
+'Welcome to web2py': 'Benvenuto su web2py',
+'Which called the function': 'che ha chiamato la funzione',
+'You are successfully running web2py': 'Stai eseguendo web2py con successo',
+'You can modify this application and adapt it to your needs': 'Puoi modificare questa applicazione adattandola alle tue necessità',
+'You visited the url': "Hai visitato l'URL",
+'appadmin is disabled because insecure channel': 'Amministrazione (appadmin) disabilitata: comunicazione non sicura',
+'cache': 'cache',
+'change password': 'Cambia password',
+'Online examples': 'Vedere gli esempi',
+'Administrative interface': "Interfaccia amministrativa",
+'customize me!': 'Personalizzami!',
+'data uploaded': 'dati caricati',
+'database': 'database',
+'database %s select': 'database %s select',
+'db': 'db',
+'design': 'progetta',
+'Documentation': 'Documentazione',
+'done!': 'fatto!',
+'edit profile': 'modifica profilo',
+'export as csv file': 'esporta come file CSV',
+'hello world': 'salve mondo',
+'insert new': 'inserisci nuovo',
+'insert new %s': 'inserisci nuovo %s',
+'invalid request': 'richiesta non valida',
+'located in the file': 'presente nel file',
+'login': 'accesso',
+'logout': 'uscita',
+'lost password?': 'dimenticato la password?',
+'new record inserted': 'nuovo record inserito',
+'next 100 rows': 'prossime 100 righe',
+'not authorized': 'non autorizzato',
+'or import from csv file': 'oppure importa da file CSV',
+'previous 100 rows': '100 righe precedenti',
+'record': 'record',
+'record does not exist': 'il record non esiste',
+'record id': 'record id',
+'register': 'registrazione',
+'selected': 'selezionato',
+'state': 'stato',
+'table': 'tabella',
+'unable to parse csv file': 'non riesco a decodificare questo file CSV',
+}

ADDED   applications/mobileblur/languages/it.py
Index: applications/mobileblur/languages/it.py
==================================================================
--- /dev/null
+++ applications/mobileblur/languages/it.py
@@ -0,0 +1,104 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"update" è un\'espressione opzionale come "campo1=\'nuovo valore\'". Non si può fare "update" o "delete" dei risultati di un JOIN ',
+'%Y-%m-%d': '%d/%m/%Y',
+'%Y-%m-%d %H:%M:%S': '%d/%m/%Y %H:%M:%S',
+'%s rows deleted': '%s righe ("record") cancellate',
+'%s rows updated': '%s righe ("record") modificate',
+'Available databases and tables': 'Database e tabelle disponibili',
+'Cannot be empty': 'Non può essere vuoto',
+'Check to delete': 'Seleziona per cancellare',
+'Client IP': 'Client IP',
+'Controller': 'Controller',
+'Copyright': 'Copyright',
+'Current request': 'Richiesta (request) corrente',
+'Current response': 'Risposta (response) corrente',
+'Current session': 'Sessione (session) corrente',
+'DB Model': 'Modello di DB',
+'Database': 'Database',
+'Delete:': 'Cancella:',
+'Description': 'Descrizione',
+'E-mail': 'E-mail',
+'Edit': 'Modifica',
+'Edit This App': 'Modifica questa applicazione',
+'Edit current record': 'Modifica record corrente',
+'First name': 'Nome',
+'Group ID': 'ID Gruppo',
+'Hello World': 'Salve Mondo',
+'Hello World in a flash!': 'Salve Mondo in un flash!',
+'Import/Export': 'Importa/Esporta',
+'Index': 'Indice',
+'Internal State': 'Stato interno',
+'Invalid Query': 'Richiesta (query) non valida',
+'Invalid email': 'Email non valida',
+'Last name': 'Cognome',
+'Layout': 'Layout',
+'Main Menu': 'Menu principale',
+'Menu Model': 'Menu Modelli',
+'Name': 'Nome',
+'New Record': 'Nuovo elemento (record)',
+'No databases in this application': 'Nessun database presente in questa applicazione',
+'Origin': 'Origine',
+'Password': 'Password',
+'Powered by': 'Powered by',
+'Query:': 'Richiesta (query):',
+'Record ID': 'Record ID',
+'Registration key': 'Chiave di Registazione',
+'Reset Password key': 'Resetta chiave Password ',
+'Role': 'Ruolo',
+'Rows in table': 'Righe nella tabella',
+'Rows selected': 'Righe selezionate',
+'Stylesheet': 'Foglio di stile (stylesheet)',
+'Sure you want to delete this object?': 'Vuoi veramente cancellare questo oggetto?',
+'Table name': 'Nome tabella',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': 'La richiesta (query) è una condizione come ad esempio  "db.tabella1.campo1==\'valore\'". Una condizione come "db.tabella1.campo1==db.tabella2.campo2" produce un "JOIN" SQL.',
+'The output of the file is a dictionary that was rendered by the view': 'L\'output del file è un "dictionary" che è stato visualizzato dalla vista',
+'This is a copy of the scaffolding application': "Questa è una copia dell'applicazione di base (scaffold)",
+'Timestamp': 'Ora (timestamp)',
+'Update:': 'Aggiorna:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Per costruire richieste (query) più complesse si usano (...)&(...) come "e" (AND), (...)|(...) come "o" (OR), e ~(...) come negazione (NOT).',
+'User ID': 'ID Utente',
+'View': 'Vista',
+'Welcome %s': 'Benvenuto %s',
+'Welcome to web2py': 'Benvenuto su web2py',
+'Which called the function': 'che ha chiamato la funzione',
+'You are successfully running web2py': 'Stai eseguendo web2py con successo',
+'You can modify this application and adapt it to your needs': 'Puoi modificare questa applicazione adattandola alle tue necessità',
+'You visited the url': "Hai visitato l'URL",
+'appadmin is disabled because insecure channel': 'Amministrazione (appadmin) disabilitata: comunicazione non sicura',
+'cache': 'cache',
+'change password': 'Cambia password',
+'Online examples': 'Vedere gli esempi',
+'Administrative interface': "Interfaccia amministrativa",
+'customize me!': 'Personalizzami!',
+'data uploaded': 'dati caricati',
+'database': 'database',
+'database %s select': 'database %s select',
+'db': 'db',
+'design': 'progetta',
+'Documentation': 'Documentazione',
+'done!': 'fatto!',
+'edit profile': 'modifica profilo',
+'export as csv file': 'esporta come file CSV',
+'hello world': 'salve mondo',
+'insert new': 'inserisci nuovo',
+'insert new %s': 'inserisci nuovo %s',
+'invalid request': 'richiesta non valida',
+'located in the file': 'presente nel file',
+'login': 'accesso',
+'logout': 'uscita',
+'lost password?': 'dimenticato la password?',
+'new record inserted': 'nuovo record inserito',
+'next 100 rows': 'prossime 100 righe',
+'not authorized': 'non autorizzato',
+'or import from csv file': 'oppure importa da file CSV',
+'previous 100 rows': '100 righe precedenti',
+'record': 'record',
+'record does not exist': 'il record non esiste',
+'record id': 'record id',
+'register': 'registrazione',
+'selected': 'selezionato',
+'state': 'stato',
+'table': 'tabella',
+'unable to parse csv file': 'non riesco a decodificare questo file CSV',
+}

ADDED   applications/mobileblur/languages/pl-pl.py
Index: applications/mobileblur/languages/pl-pl.py
==================================================================
--- /dev/null
+++ applications/mobileblur/languages/pl-pl.py
@@ -0,0 +1,81 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"Uaktualnij" jest dodatkowym wyra\xc5\xbceniem postaci "pole1=\'nowawarto\xc5\x9b\xc4\x87\'". Nie mo\xc5\xbcesz uaktualni\xc4\x87 lub usun\xc4\x85\xc4\x87 wynik\xc3\xb3w z JOIN:',
+'%Y-%m-%d': '%Y-%m-%d',
+'%Y-%m-%d %H:%M:%S': '%Y-%m-%d %H:%M:%S',
+'%s rows deleted': 'Wierszy usuni\xc4\x99tych: %s',
+'%s rows updated': 'Wierszy uaktualnionych: %s',
+'Available databases and tables': 'Dost\xc4\x99pne bazy danych i tabele',
+'Cannot be empty': 'Nie mo\xc5\xbce by\xc4\x87 puste',
+'Change Password': 'Change Password',
+'Check to delete': 'Zaznacz aby usun\xc4\x85\xc4\x87',
+'Controller': 'Controller',
+'Copyright': 'Copyright',
+'Current request': 'Aktualne \xc5\xbc\xc4\x85danie',
+'Current response': 'Aktualna odpowied\xc5\xba',
+'Current session': 'Aktualna sesja',
+'DB Model': 'DB Model',
+'Database': 'Database',
+'Delete:': 'Usu\xc5\x84:',
+'Edit': 'Edit',
+'Edit Profile': 'Edit Profile',
+'Edit This App': 'Edit This App',
+'Edit current record': 'Edytuj aktualny rekord',
+'Hello World': 'Witaj \xc5\x9awiecie',
+'Import/Export': 'Importuj/eksportuj',
+'Index': 'Index',
+'Internal State': 'Stan wewn\xc4\x99trzny',
+'Invalid Query': 'B\xc5\x82\xc4\x99dne zapytanie',
+'Layout': 'Layout',
+'Login': 'Zaloguj',
+'Logout': 'Logout',
+'Lost Password': 'Przypomnij has\xc5\x82o',
+'Main Menu': 'Main Menu',
+'Menu Model': 'Menu Model',
+'New Record': 'Nowy rekord',
+'No databases in this application': 'Brak baz danych w tej aplikacji',
+'Powered by': 'Powered by',
+'Query:': 'Zapytanie:',
+'Register': 'Zarejestruj',
+'Rows in table': 'Wiersze w tabeli',
+'Rows selected': 'Wybrane wiersze',
+'Stylesheet': 'Stylesheet',
+'Sure you want to delete this object?': 'Czy na pewno chcesz usun\xc4\x85\xc4\x87 ten obiekt?',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': '"Zapytanie" jest warunkiem postaci "db.tabela1.pole1==\'warto\xc5\x9b\xc4\x87\'". Takie co\xc5\x9b jak "db.tabela1.pole1==db.tabela2.pole2" oznacza SQL JOIN.',
+'Update:': 'Uaktualnij:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'U\xc5\xbcyj (...)&(...) jako AND, (...)|(...) jako OR oraz ~(...)  jako NOT do tworzenia bardziej skomplikowanych zapyta\xc5\x84.',
+'View': 'View',
+'Welcome %s': 'Welcome %s',
+'Welcome to web2py': 'Witaj w web2py',
+'appadmin is disabled because insecure channel': 'appadmin is disabled because insecure channel',
+'cache': 'cache',
+'change password': 'change password',
+'Online examples': 'Kliknij aby przej\xc5\x9b\xc4\x87 do interaktywnych przyk\xc5\x82ad\xc3\xb3w',
+'Administrative interface': 'Kliknij aby przej\xc5\x9b\xc4\x87 do panelu administracyjnego',
+'customize me!': 'dostosuj mnie!',
+'data uploaded': 'dane wys\xc5\x82ane',
+'database': 'baza danych',
+'database %s select': 'wyb\xc3\xb3r z bazy danych %s',
+'db': 'baza danych',
+'design': 'projektuj',
+'done!': 'zrobione!',
+'edit profile': 'edit profile',
+'export as csv file': 'eksportuj jako plik csv',
+'insert new': 'wstaw nowy rekord tabeli',
+'insert new %s': 'wstaw nowy rekord do tabeli %s',
+'invalid request': 'B\xc5\x82\xc4\x99dne \xc5\xbc\xc4\x85danie',
+'login': 'login',
+'logout': 'logout',
+'new record inserted': 'nowy rekord zosta\xc5\x82 wstawiony',
+'next 100 rows': 'nast\xc4\x99pne 100 wierszy',
+'or import from csv file': 'lub zaimportuj z pliku csv',
+'previous 100 rows': 'poprzednie 100 wierszy',
+'record': 'record',
+'record does not exist': 'rekord nie istnieje',
+'record id': 'id rekordu',
+'register': 'register',
+'selected': 'wybranych',
+'state': 'stan',
+'table': 'tabela',
+'unable to parse csv file': 'nie mo\xc5\xbcna sparsowa\xc4\x87 pliku csv',
+}

ADDED   applications/mobileblur/languages/pl.py
Index: applications/mobileblur/languages/pl.py
==================================================================
--- /dev/null
+++ applications/mobileblur/languages/pl.py
@@ -0,0 +1,104 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"Uaktualnij" jest dodatkowym wyra\xc5\xbceniem postaci "pole1=\'nowawarto\xc5\x9b\xc4\x87\'". Nie mo\xc5\xbcesz uaktualni\xc4\x87 lub usun\xc4\x85\xc4\x87 wynik\xc3\xb3w z JOIN:',
+'%Y-%m-%d': '%Y-%m-%d',
+'%Y-%m-%d %H:%M:%S': '%Y-%m-%d %H:%M:%S',
+'%s rows deleted': 'Wierszy usuni\xc4\x99tych: %s',
+'%s rows updated': 'Wierszy uaktualnionych: %s',
+'Authentication': 'Uwierzytelnienie',
+'Available databases and tables': 'Dost\xc4\x99pne bazy danych i tabele',
+'Cannot be empty': 'Nie mo\xc5\xbce by\xc4\x87 puste',
+'Change Password': 'Zmie\xc5\x84 has\xc5\x82o',
+'Check to delete': 'Zaznacz aby usun\xc4\x85\xc4\x87',
+'Check to delete:': 'Zaznacz aby usun\xc4\x85\xc4\x87:',
+'Client IP': 'IP klienta',
+'Controller': 'Kontroler',
+'Copyright': 'Copyright',
+'Current request': 'Aktualne \xc5\xbc\xc4\x85danie',
+'Current response': 'Aktualna odpowied\xc5\xba',
+'Current session': 'Aktualna sesja',
+'DB Model': 'Model bazy danych',
+'Database': 'Baza danych',
+'Delete:': 'Usu\xc5\x84:',
+'Description': 'Opis',
+'E-mail': 'Adres e-mail',
+'Edit': 'Edycja',
+'Edit Profile': 'Edytuj profil',
+'Edit This App': 'Edytuj t\xc4\x99 aplikacj\xc4\x99',
+'Edit current record': 'Edytuj obecny rekord',
+'First name': 'Imi\xc4\x99',
+'Function disabled': 'Funkcja wy\xc5\x82\xc4\x85czona',
+'Group ID': 'ID grupy',
+'Hello World': 'Witaj \xc5\x9awiecie',
+'Import/Export': 'Importuj/eksportuj',
+'Index': 'Indeks',
+'Internal State': 'Stan wewn\xc4\x99trzny',
+'Invalid Query': 'B\xc5\x82\xc4\x99dne zapytanie',
+'Invalid email': 'B\xc5\x82\xc4\x99dny adres email',
+'Last name': 'Nazwisko',
+'Layout': 'Uk\xc5\x82ad',
+'Login': 'Zaloguj',
+'Logout': 'Wyloguj',
+'Lost Password': 'Przypomnij has\xc5\x82o',
+'Main Menu': 'Menu g\xc5\x82\xc3\xb3wne',
+'Menu Model': 'Model menu',
+'Name': 'Nazwa',
+'New Record': 'Nowy rekord',
+'No databases in this application': 'Brak baz danych w tej aplikacji',
+'Origin': '\xc5\xb9r\xc3\xb3d\xc5\x82o',
+'Password': 'Has\xc5\x82o',
+"Password fields don't match": 'Pola has\xc5\x82a nie s\xc4\x85 zgodne ze sob\xc4\x85',
+'Powered by': 'Zasilane przez',
+'Query:': 'Zapytanie:',
+'Record ID': 'ID rekordu',
+'Register': 'Zarejestruj',
+'Registration key': 'Klucz rejestracji',
+'Role': 'Rola',
+'Rows in table': 'Wiersze w tabeli',
+'Rows selected': 'Wybrane wiersze',
+'Stylesheet': 'Arkusz styl\xc3\xb3w',
+'Submit': 'Wy\xc5\x9blij',
+'Sure you want to delete this object?': 'Czy na pewno chcesz usun\xc4\x85\xc4\x87 ten obiekt?',
+'Table name': 'Nazwa tabeli',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': '"Zapytanie" jest warunkiem postaci "db.tabela1.pole1==\'warto\xc5\x9b\xc4\x87\'". Takie co\xc5\x9b jak "db.tabela1.pole1==db.tabela2.pole2" oznacza SQL JOIN.',
+'Timestamp': 'Znacznik czasu',
+'Update:': 'Uaktualnij:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'U\xc5\xbcyj (...)&(...) jako AND, (...)|(...) jako OR oraz ~(...)  jako NOT do tworzenia bardziej skomplikowanych zapyta\xc5\x84.',
+'User %(id)s Registered': 'U\xc5\xbcytkownik %(id)s zosta\xc5\x82 zarejestrowany',
+'User ID': 'ID u\xc5\xbcytkownika',
+'Verify Password': 'Potwierd\xc5\xba has\xc5\x82o',
+'View': 'Widok',
+'Welcome %s': 'Welcome %s',
+'Welcome to web2py': 'Witaj w web2py',
+'appadmin is disabled because insecure channel': 'administracja aplikacji wy\xc5\x82\xc4\x85czona z powodu braku bezpiecznego po\xc5\x82\xc4\x85czenia',
+'cache': 'cache',
+'change password': 'change password',
+'Online examples': 'Kliknij aby przej\xc5\x9b\xc4\x87 do interaktywnych przyk\xc5\x82ad\xc3\xb3w',
+'Administrative interface': 'Kliknij aby przej\xc5\x9b\xc4\x87 do panelu administracyjnego',
+'customize me!': 'dostosuj mnie!',
+'data uploaded': 'dane wys\xc5\x82ane',
+'database': 'baza danych',
+'database %s select': 'wyb\xc3\xb3r z bazy danych %s',
+'db': 'baza danych',
+'design': 'projektuj',
+'done!': 'zrobione!',
+'edit profile': 'edit profile',
+'export as csv file': 'eksportuj jako plik csv',
+'insert new': 'wstaw nowy rekord tabeli',
+'insert new %s': 'wstaw nowy rekord do tabeli %s',
+'invalid request': 'B\xc5\x82\xc4\x99dne \xc5\xbc\xc4\x85danie',
+'login': 'login',
+'logout': 'logout',
+'new record inserted': 'nowy rekord zosta\xc5\x82 wstawiony',
+'next 100 rows': 'nast\xc4\x99pne 100 wierszy',
+'or import from csv file': 'lub zaimportuj z pliku csv',
+'previous 100 rows': 'poprzednie 100 wierszy',
+'record': 'rekord',
+'record does not exist': 'rekord nie istnieje',
+'record id': 'id rekordu',
+'register': 'register',
+'selected': 'wybranych',
+'state': 'stan',
+'table': 'tabela',
+'unable to parse csv file': 'nie mo\xc5\xbcna sparsowa\xc4\x87 pliku csv',
+}

ADDED   applications/mobileblur/languages/pt-br.py
Index: applications/mobileblur/languages/pt-br.py
==================================================================
--- /dev/null
+++ applications/mobileblur/languages/pt-br.py
@@ -0,0 +1,142 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"update" é uma expressão opcional como "campo1=\'novovalor\'". Você não pode atualizar ou apagar os resultados de um JOIN',
+'%Y-%m-%d': '%d-%m-%Y',
+'%Y-%m-%d %H:%M:%S': '%d-%m-%Y %H:%M:%S',
+'%s rows deleted': '%s linhas apagadas',
+'%s rows updated': '%s linhas atualizadas',
+'About': 'About',
+'Access Control': 'Access Control',
+'Ajax Recipes': 'Ajax Recipes',
+'Available databases and tables': 'Bancos de dados e tabelas disponíveis',
+'Buy this book': 'Buy this book',
+'Cannot be empty': 'Não pode ser vazio',
+'Check to delete': 'Marque para apagar',
+'Client IP': 'Client IP',
+'Community': 'Community',
+'Controller': 'Controlador',
+'Copyright': 'Copyright',
+'Current request': 'Requisição atual',
+'Current response': 'Resposta atual',
+'Current session': 'Sessão atual',
+'DB Model': 'Modelo BD',
+'Database': 'Banco de dados',
+'Delete:': 'Apagar:',
+'Demo': 'Demo',
+'Deployment Recipes': 'Deployment Recipes',
+'Description': 'Description',
+'Documentation': 'Documentation',
+'Download': 'Download',
+'E-mail': 'E-mail',
+'Edit': 'Editar',
+'Edit This App': 'Edit This App',
+'Edit current record': 'Editar o registro atual',
+'Errors': 'Errors',
+'FAQ': 'FAQ',
+'First name': 'First name',
+'Forms and Validators': 'Forms and Validators',
+'Free Applications': 'Free Applications',
+'Group ID': 'Group ID',
+'Groups': 'Groups',
+'Hello World': 'Olá Mundo',
+'Home': 'Home',
+'Import/Export': 'Importar/Exportar',
+'Index': 'Início',
+'Internal State': 'Estado Interno',
+'Introduction': 'Introduction',
+'Invalid Query': 'Consulta Inválida',
+'Invalid email': 'Invalid email',
+'Last name': 'Last name',
+'Layout': 'Layout',
+'Layouts': 'Layouts',
+'Live chat': 'Live chat',
+'Login': 'Autentique-se',
+'Lost Password': 'Esqueceu sua senha?',
+'Main Menu': 'Menu Principal',
+'Menu Model': 'Modelo de Menu',
+'Name': 'Name',
+'New Record': 'Novo Registro',
+'No databases in this application': 'Sem bancos de dados nesta aplicação',
+'Origin': 'Origin',
+'Other Recipes': 'Other Recipes',
+'Overview': 'Overview',
+'Password': 'Password',
+'Plugins': 'Plugins',
+'Powered by': 'Powered by',
+'Preface': 'Preface',
+'Python': 'Python',
+'Query:': 'Consulta:',
+'Quick Examples': 'Quick Examples',
+'Recipes': 'Recipes',
+'Record ID': 'Record ID',
+'Register': 'Registre-se',
+'Registration key': 'Registration key',
+'Reset Password key': 'Reset Password key',
+'Resources': 'Resources',
+'Role': 'Role',
+'Rows in table': 'Linhas na tabela',
+'Rows selected': 'Linhas selecionadas',
+'Semantic': 'Semantic',
+'Services': 'Services',
+'Stylesheet': 'Stylesheet',
+'Support': 'Support',
+'Sure you want to delete this object?': 'Está certo(a) que deseja apagar esse objeto ?',
+'Table name': 'Table name',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': 'Uma "consulta" é uma condição como "db.tabela1.campo1==\'valor\'". Expressões como "db.tabela1.campo1==db.tabela2.campo2" resultam em um JOIN SQL.',
+'The Core': 'The Core',
+'The Views': 'The Views',
+'The output of the file is a dictionary that was rendered by the view': 'The output of the file is a dictionary that was rendered by the view',
+'This App': 'This App',
+'This is a copy of the scaffolding application': 'This is a copy of the scaffolding application',
+'Timestamp': 'Timestamp',
+'Twitter': 'Twitter',
+'Update:': 'Atualizar:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Use (...)&(...) para AND, (...)|(...) para OR, e ~(...)  para NOT para construir consultas mais complexas.',
+'User ID': 'User ID',
+'User Voice': 'User Voice',
+'Videos': 'Videos',
+'View': 'Visualização',
+'Web2py': 'Web2py',
+'Welcome': 'Welcome',
+'Welcome %s': 'Vem vindo %s',
+'Welcome to web2py': 'Bem vindo ao web2py',
+'Which called the function': 'Which called the function',
+'You are successfully running web2py': 'You are successfully running web2py',
+'You are successfully running web2py.': 'You are successfully running web2py.',
+'You can modify this application and adapt it to your needs': 'You can modify this application and adapt it to your needs',
+'You visited the url': 'You visited the url',
+'appadmin is disabled because insecure channel': 'Administração desativada devido ao canal inseguro',
+'cache': 'cache',
+'change password': 'modificar senha',
+'Online examples': 'Alguns exemplos',
+'Administrative interface': 'Interface administrativa',
+'customize me!': 'Personalize-me!',
+'data uploaded': 'dados enviados',
+'database': 'banco de dados',
+'database %s select': 'Selecionar banco de dados %s',
+'db': 'bd',
+'design': 'design',
+'Documentation': 'Documentation',
+'done!': 'concluído!',
+'edit profile': 'editar perfil',
+'export as csv file': 'exportar como um arquivo csv',
+'insert new': 'inserir novo',
+'insert new %s': 'inserir novo %s',
+'invalid request': 'requisição inválida',
+'located in the file': 'located in the file',
+'login': 'Entrar',
+'logout': 'Sair',
+'lost password?': 'lost password?',
+'new record inserted': 'novo registro inserido',
+'next 100 rows': 'próximas 100 linhas',
+'or import from csv file': 'ou importar de um arquivo csv',
+'previous 100 rows': '100 linhas anteriores',
+'record': 'registro',
+'record does not exist': 'registro não existe',
+'record id': 'id do registro',
+'register': 'Registre-se',
+'selected': 'selecionado',
+'state': 'estado',
+'table': 'tabela',
+'unable to parse csv file': 'não foi possível analisar arquivo csv',
+}

ADDED   applications/mobileblur/languages/pt-pt.py
Index: applications/mobileblur/languages/pt-pt.py
==================================================================
--- /dev/null
+++ applications/mobileblur/languages/pt-pt.py
@@ -0,0 +1,116 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"update" é uma expressão opcional como "field1=\'newvalue\'". Não pode actualizar ou eliminar os resultados de um JOIN',
+'%Y-%m-%d': '%Y-%m-%d',
+'%Y-%m-%d %H:%M:%S': '%Y-%m-%d %H:%M:%S',
+'%s rows deleted': '%s linhas eliminadas',
+'%s rows updated': '%s linhas actualizadas',
+'About': 'About',
+'Author Reference Auth User': 'Author Reference Auth User',
+'Author Reference Auth User.username': 'Author Reference Auth User.username',
+'Available databases and tables': 'bases de dados e tabelas disponíveis',
+'Cannot be empty': 'não pode ser vazio',
+'Category Create': 'Category Create',
+'Category Select': 'Category Select',
+'Check to delete': 'seleccione para eliminar',
+'Comment Create': 'Comment Create',
+'Comment Select': 'Comment Select',
+'Content': 'Content',
+'Controller': 'Controlador',
+'Copyright': 'Direitos de cópia',
+'Created By': 'Created By',
+'Created On': 'Created On',
+'Current request': 'pedido currente',
+'Current response': 'resposta currente',
+'Current session': 'sessão currente',
+'DB Model': 'Modelo de BD',
+'Database': 'Base de dados',
+'Delete:': 'Eliminar:',
+'Edit': 'Editar',
+'Edit This App': 'Edite esta aplicação',
+'Edit current record': 'Edição de registo currente',
+'Email': 'Email',
+'First Name': 'First Name',
+'For %s #%s': 'For %s #%s',
+'Hello World': 'Olá Mundo',
+'Import/Export': 'Importar/Exportar',
+'Index': 'Índice',
+'Internal State': 'Estado interno',
+'Invalid Query': 'Consulta Inválida',
+'Last Name': 'Last Name',
+'Layout': 'Esboço',
+'Main Menu': 'Menu Principal',
+'Menu Model': 'Menu do Modelo',
+'Modified By': 'Modified By',
+'Modified On': 'Modified On',
+'Name': 'Name',
+'New Record': 'Novo Registo',
+'No Data': 'No Data',
+'No databases in this application': 'Não há bases de dados nesta aplicação',
+'Password': 'Password',
+'Post Create': 'Post Create',
+'Post Select': 'Post Select',
+'Powered by': 'Suportado por',
+'Query:': 'Interrogação:',
+'Replyto Reference Post': 'Replyto Reference Post',
+'Rows in table': 'Linhas numa tabela',
+'Rows selected': 'Linhas seleccionadas',
+'Stylesheet': 'Folha de estilo',
+'Sure you want to delete this object?': 'Tem a certeza que deseja eliminar este objecto?',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': 'A "query" é uma condição do tipo "db.table1.field1==\'value\'". Algo como "db.table1.field1==db.table2.field2" resultaria num SQL JOIN.',
+'Title': 'Title',
+'Update:': 'Actualização:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Utilize (...)&(...) para AND, (...)|(...) para OR, e ~(...)  para NOT para construir interrogações mais complexas.',
+'Username': 'Username',
+'View': 'Vista',
+'Welcome %s': 'Bem-vindo(a) %s',
+'Welcome to Gluonization': 'Bem vindo ao Web2py',
+'Welcome to web2py': 'Bem-vindo(a) ao web2py',
+'When': 'When',
+'appadmin is disabled because insecure channel': 'appadmin está desactivada pois o canal é inseguro',
+'cache': 'cache',
+'change password': 'alterar palavra-chave',
+'Online examples': 'Exemplos online',
+'Administrative interface': 'Painel administrativo',
+'create new category': 'create new category',
+'create new comment': 'create new comment',
+'create new post': 'create new post',
+'customize me!': 'Personaliza-me!',
+'data uploaded': 'informação enviada',
+'database': 'base de dados',
+'database %s select': 'selecção de base de dados %s',
+'db': 'bd',
+'design': 'design',
+'done!': 'concluído!',
+'edit category': 'edit category',
+'edit comment': 'edit comment',
+'edit post': 'edit post',
+'edit profile': 'Editar perfil',
+'export as csv file': 'exportar como ficheiro csv',
+'insert new': 'inserir novo',
+'insert new %s': 'inserir novo %s',
+'invalid request': 'Pedido Inválido',
+'login': 'login',
+'logout': 'logout',
+'new record inserted': 'novo registo inserido',
+'next 100 rows': 'próximas 100 linhas',
+'or import from csv file': 'ou importe a partir de ficheiro csv',
+'previous 100 rows': '100 linhas anteriores',
+'record': 'registo',
+'record does not exist': 'registo inexistente',
+'record id': 'id de registo',
+'register': 'register',
+'search category': 'search category',
+'search comment': 'search comment',
+'search post': 'search post',
+'select category': 'select category',
+'select comment': 'select comment',
+'select post': 'select post',
+'selected': 'seleccionado(s)',
+'show category': 'show category',
+'show comment': 'show comment',
+'show post': 'show post',
+'state': 'estado',
+'table': 'tabela',
+'unable to parse csv file': 'não foi possível carregar ficheiro csv',
+}

ADDED   applications/mobileblur/languages/pt.py
Index: applications/mobileblur/languages/pt.py
==================================================================
--- /dev/null
+++ applications/mobileblur/languages/pt.py
@@ -0,0 +1,116 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"update" é uma expressão opcional como "field1=\'newvalue\'". Não pode actualizar ou eliminar os resultados de um JOIN',
+'%Y-%m-%d': '%Y-%m-%d',
+'%Y-%m-%d %H:%M:%S': '%Y-%m-%d %H:%M:%S',
+'%s rows deleted': '%s linhas eliminadas',
+'%s rows updated': '%s linhas actualizadas',
+'About': 'About',
+'Author Reference Auth User': 'Author Reference Auth User',
+'Author Reference Auth User.username': 'Author Reference Auth User.username',
+'Available databases and tables': 'bases de dados e tabelas disponíveis',
+'Cannot be empty': 'não pode ser vazio',
+'Category Create': 'Category Create',
+'Category Select': 'Category Select',
+'Check to delete': 'seleccione para eliminar',
+'Comment Create': 'Comment Create',
+'Comment Select': 'Comment Select',
+'Content': 'Content',
+'Controller': 'Controlador',
+'Copyright': 'Direitos de cópia',
+'Created By': 'Created By',
+'Created On': 'Created On',
+'Current request': 'pedido currente',
+'Current response': 'resposta currente',
+'Current session': 'sessão currente',
+'DB Model': 'Modelo de BD',
+'Database': 'Base de dados',
+'Delete:': 'Eliminar:',
+'Edit': 'Editar',
+'Edit This App': 'Edite esta aplicação',
+'Edit current record': 'Edição de registo currente',
+'Email': 'Email',
+'First Name': 'First Name',
+'For %s #%s': 'For %s #%s',
+'Hello World': 'Olá Mundo',
+'Import/Export': 'Importar/Exportar',
+'Index': 'Índice',
+'Internal State': 'Estado interno',
+'Invalid Query': 'Consulta Inválida',
+'Last Name': 'Last Name',
+'Layout': 'Esboço',
+'Main Menu': 'Menu Principal',
+'Menu Model': 'Menu do Modelo',
+'Modified By': 'Modified By',
+'Modified On': 'Modified On',
+'Name': 'Name',
+'New Record': 'Novo Registo',
+'No Data': 'No Data',
+'No databases in this application': 'Não há bases de dados nesta aplicação',
+'Password': 'Password',
+'Post Create': 'Post Create',
+'Post Select': 'Post Select',
+'Powered by': 'Suportado por',
+'Query:': 'Interrogação:',
+'Replyto Reference Post': 'Replyto Reference Post',
+'Rows in table': 'Linhas numa tabela',
+'Rows selected': 'Linhas seleccionadas',
+'Stylesheet': 'Folha de estilo',
+'Sure you want to delete this object?': 'Tem a certeza que deseja eliminar este objecto?',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': 'A "query" é uma condição do tipo "db.table1.field1==\'value\'". Algo como "db.table1.field1==db.table2.field2" resultaria num SQL JOIN.',
+'Title': 'Title',
+'Update:': 'Actualização:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Utilize (...)&(...) para AND, (...)|(...) para OR, e ~(...)  para NOT para construir interrogações mais complexas.',
+'Username': 'Username',
+'View': 'Vista',
+'Welcome %s': 'Bem-vindo(a) %s',
+'Welcome to Gluonization': 'Bem vindo ao Web2py',
+'Welcome to web2py': 'Bem-vindo(a) ao web2py',
+'When': 'When',
+'appadmin is disabled because insecure channel': 'appadmin está desactivada pois o canal é inseguro',
+'cache': 'cache',
+'change password': 'alterar palavra-chave',
+'Online examples': 'Exemplos online',
+'Administrative interface': 'Painel administrativo',
+'create new category': 'create new category',
+'create new comment': 'create new comment',
+'create new post': 'create new post',
+'customize me!': 'Personaliza-me!',
+'data uploaded': 'informação enviada',
+'database': 'base de dados',
+'database %s select': 'selecção de base de dados %s',
+'db': 'bd',
+'design': 'design',
+'done!': 'concluído!',
+'edit category': 'edit category',
+'edit comment': 'edit comment',
+'edit post': 'edit post',
+'edit profile': 'Editar perfil',
+'export as csv file': 'exportar como ficheiro csv',
+'insert new': 'inserir novo',
+'insert new %s': 'inserir novo %s',
+'invalid request': 'Pedido Inválido',
+'login': 'login',
+'logout': 'logout',
+'new record inserted': 'novo registo inserido',
+'next 100 rows': 'próximas 100 linhas',
+'or import from csv file': 'ou importe a partir de ficheiro csv',
+'previous 100 rows': '100 linhas anteriores',
+'record': 'registo',
+'record does not exist': 'registo inexistente',
+'record id': 'id de registo',
+'register': 'register',
+'search category': 'search category',
+'search comment': 'search comment',
+'search post': 'search post',
+'select category': 'select category',
+'select comment': 'select comment',
+'select post': 'select post',
+'selected': 'seleccionado(s)',
+'show category': 'show category',
+'show comment': 'show comment',
+'show post': 'show post',
+'state': 'estado',
+'table': 'tabela',
+'unable to parse csv file': 'não foi possível carregar ficheiro csv',
+}

ADDED   applications/mobileblur/languages/ru-ru.py
Index: applications/mobileblur/languages/ru-ru.py
==================================================================
--- /dev/null
+++ applications/mobileblur/languages/ru-ru.py
@@ -0,0 +1,96 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"Изменить" - необязательное выражение вида "field1=\'новое значение\'". Результаты операции JOIN нельзя изменить или удалить.',
+'%Y-%m-%d': '%Y-%m-%d',
+'%Y-%m-%d %H:%M:%S': '%Y-%m-%d %H:%M:%S',
+'%s rows deleted': '%s строк удалено',
+'%s rows updated': '%s строк изменено',
+'Available databases and tables': 'Базы данных и таблицы',
+'Cannot be empty': 'Пустое значение недопустимо',
+'Change Password': 'Смените пароль',
+'Check to delete': 'Удалить',
+'Check to delete:': 'Удалить:',
+'Client IP': 'Client IP',
+'Current request': 'Текущий запрос',
+'Current response': 'Текущий ответ',
+'Current session': 'Текущая сессия',
+'Delete:': 'Удалить:',
+'Description': 'Описание',
+'E-mail': 'E-mail',
+'Edit Profile': 'Редактировать профиль',
+'Edit current record': 'Редактировать текущую запись',
+'First name': 'Имя',
+'Group ID': 'Group ID',
+'Hello World': 'Заработало!',
+'Import/Export': 'Импорт/экспорт',
+'Internal State': 'Внутренне состояние',
+'Invalid Query': 'Неверный запрос',
+'Invalid email': 'Неверный email',
+'Invalid login': 'Неверный логин',
+'Invalid password': 'Неверный пароль',
+'Last name': 'Фамилия',
+'Logged in': 'Вход выполнен',
+'Logged out': 'Выход выполнен',
+'Login': 'Вход',
+'Logout': 'Выход',
+'Lost Password': 'Забыли пароль?',
+'Name': 'Name',
+'New Record': 'Новая запись',
+'New password': 'Новый пароль',
+'No databases in this application': 'В приложении нет баз данных',
+'Old password': 'Старый пароль',
+'Origin': 'Происхождение',
+'Password': 'Пароль',
+"Password fields don't match": 'Пароли не совпадают',
+'Query:': 'Запрос:',
+'Record ID': 'ID записи',
+'Register': 'Зарегистрироваться',
+'Registration key': 'Ключ регистрации',
+'Remember me (for 30 days)': 'Запомнить меня (на 30 дней)',
+'Reset Password key': 'Сбросить ключ пароля',
+'Role': 'Роль',
+'Rows in table': 'Строк в таблице',
+'Rows selected': 'Выделено строк',
+'Submit': 'Отправить',
+'Sure you want to delete this object?': 'Подтвердите удаление объекта',
+'Table name': 'Имя таблицы',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': '"Запрос" - это условие вида "db.table1.field1==\'значение\'". Выражение вида "db.table1.field1==db.table2.field2" формирует SQL JOIN.',
+'Timestamp': 'Отметка времени',
+'Update:': 'Изменить:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Для построение сложных запросов используйте операторы "И": (...)&(...), "ИЛИ": (...)|(...), "НЕ": ~(...).',
+'User %(id)s Logged-in': 'Пользователь %(id)s вошёл',
+'User %(id)s Logged-out': 'Пользователь %(id)s вышел',
+'User %(id)s Password changed': 'Пользователь %(id)s сменил пароль',
+'User %(id)s Profile updated': 'Пользователь %(id)s обновил профиль',
+'User %(id)s Registered': 'Пользователь %(id)s зарегистрировался',
+'User ID': 'ID пользователя',
+'Verify Password': 'Повторите пароль',
+'Welcome to web2py': 'Добро пожаловать в web2py',
+'Online examples': 'примеры он-лайн',
+'Administrative interface': 'административный интерфейс',
+'customize me!': 'настройте внешний вид!',
+'data uploaded': 'данные загружены',
+'database': 'база данных',
+'database %s select': 'выбор базы данных %s',
+'db': 'БД',
+'design': 'дизайн',
+'done!': 'готово!',
+'export as csv file': 'экспорт в  csv-файл',
+'insert new': 'добавить',
+'insert new %s': 'добавить %s',
+'invalid request': 'неверный запрос',
+'login': 'вход',
+'logout': 'выход',
+'new record inserted': 'новая запись добавлена',
+'next 100 rows': 'следующие 100 строк',
+'or import from csv file': 'или импорт из csv-файла',
+'password': 'пароль',
+'previous 100 rows': 'предыдущие 100 строк',
+'profile': 'профиль',
+'record does not exist': 'запись не найдена',
+'record id': 'id записи',
+'selected': 'выбрано',
+'state': 'состояние',
+'table': 'таблица',
+'unable to parse csv file': 'нечитаемый csv-файл',
+}

ADDED   applications/mobileblur/languages/sk-sk.py
Index: applications/mobileblur/languages/sk-sk.py
==================================================================
--- /dev/null
+++ applications/mobileblur/languages/sk-sk.py
@@ -0,0 +1,111 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"update" je voliteľný výraz ako "field1=\'newvalue\'". Nemôžete upravovať alebo zmazať výsledky JOINu',
+'%Y-%m-%d': '%d.%m.%Y',
+'%Y-%m-%d %H:%M:%S': '%d.%m.%Y %H:%M:%S',
+'%s rows deleted': '%s zmazaných záznamov',
+'%s rows updated': '%s upravených záznamov',
+'Available databases and tables': 'Dostupné databázy a tabuľky',
+'Cannot be empty': 'Nemôže byť prázdne',
+'Check to delete': 'Označiť na zmazanie',
+'Controller': 'Controller',
+'Copyright': 'Copyright',
+'Current request': 'Aktuálna požiadavka',
+'Current response': 'Aktuálna odpoveď',
+'Current session': 'Aktuálne sedenie',
+'DB Model': 'DB Model',
+'Database': 'Databáza',
+'Delete:': 'Zmazať:',
+'Description': 'Popis',
+'Edit': 'Upraviť',
+'Edit Profile': 'Upraviť profil',
+'Edit current record': 'Upraviť aktuálny záznam',
+'First name': 'Krstné meno',
+'Group ID': 'ID skupiny',
+'Hello World': 'Ahoj svet',
+'Import/Export': 'Import/Export',
+'Index': 'Index',
+'Internal State': 'Vnútorný stav',
+'Invalid email': 'Neplatný email',
+'Invalid Query': 'Neplatná otázka',
+'Invalid password': 'Nesprávne heslo',
+'Last name': 'Priezvisko',
+'Layout': 'Layout',
+'Logged in': 'Prihlásený',
+'Logged out': 'Odhlásený',
+'Lost Password': 'Stratené heslo?',
+'Menu Model': 'Menu Model',
+'Name': 'Meno',
+'New Record': 'Nový záznam',
+'New password': 'Nové heslo',
+'No databases in this application': 'V tejto aplikácii nie sú databázy',
+'Old password': 'Staré heslo',
+'Origin': 'Pôvod',
+'Password': 'Heslo',
+'Powered by': 'Powered by',
+'Query:': 'Otázka:',
+'Record ID': 'ID záznamu',
+'Register': 'Zaregistrovať sa',
+'Registration key': 'Registračný kľúč',
+'Remember me (for 30 days)': 'Zapamätaj si ma (na 30 dní)',
+'Reset Password key': 'Nastaviť registračný kľúč',
+'Role': 'Rola',
+'Rows in table': 'riadkov v tabuľke',
+'Rows selected': 'označených riadkov',
+'Submit': 'Odoslať',
+'Stylesheet': 'Stylesheet',
+'Sure you want to delete this object?': 'Ste si istí, že chcete zmazať tento objekt?',
+'Table name': 'Názov tabuľky',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': '"query" je podmienka ako "db.table1.field1==\'value\'". Niečo ako "db.table1.field1==db.table2.field2" má za výsledok SQL JOIN.',
+'The output of the file is a dictionary that was rendered by the view': 'Výstup zo súboru je slovník, ktorý bol zobrazený vo view',
+'This is a copy of the scaffolding application': 'Toto je kópia skeletu aplikácie',
+'Timestamp': 'Časová pečiatka',
+'Update:': 'Upraviť:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Použite (...)&(...) pre AND, (...)|(...) pre OR a ~(...) pre NOT na poskladanie komplexnejších otázok.',
+'User %(id)s Logged-in': 'Používateľ %(id)s prihlásený',
+'User %(id)s Logged-out': 'Používateľ %(id)s odhlásený',
+'User %(id)s Password changed': 'Používateľ %(id)s zmenil heslo',
+'User %(id)s Profile updated': 'Používateľ %(id)s upravil profil',
+'User %(id)s Registered': 'Používateľ %(id)s sa zaregistroval',
+'User ID': 'ID používateľa',
+'Verify Password': 'Zopakujte heslo',
+'View': 'Zobraziť',
+'Welcome to web2py': 'Vitajte vo web2py',
+'Which called the function': 'Ktorý zavolal funkciu',
+'You are successfully running web2py': 'Úspešne ste spustili web2py',
+'You can modify this application and adapt it to your needs': 'Môžete upraviť túto aplikáciu a prispôsobiť ju svojim potrebám',
+'You visited the url': 'Navštívili ste URL',
+'appadmin is disabled because insecure channel': 'appadmin je zakázaný bez zabezpečeného spojenia',
+'cache': 'cache',
+'Online examples': 'pre online príklady kliknite sem',
+'Administrative interface': 'pre administrátorské rozhranie kliknite sem',
+'customize me!': 'prispôsob ma!',
+'data uploaded': 'údaje naplnené',
+'database': 'databáza',
+'database %s select': 'databáza %s výber',
+'db': 'db',
+'design': 'návrh',
+'Documentation': 'Dokumentácia',
+'done!': 'hotovo!',
+'export as csv file': 'exportovať do csv súboru',
+'insert new': 'vložiť nový záznam ',
+'insert new %s': 'vložiť nový  záznam %s',
+'invalid request': 'Neplatná požiadavka',
+'located in the file': 'nachádzajúci sa v súbore ',
+'login': 'prihlásiť',
+'logout': 'odhlásiť',
+'lost password?': 'stratené heslo?',
+'new record inserted': 'nový záznam bol vložený',
+'next 100 rows': 'ďalších 100 riadkov',
+'or import from csv file': 'alebo naimportovať z csv súboru',
+'password': 'heslo',
+'previous 100 rows': 'predchádzajúcich 100 riadkov',
+'record': 'záznam',
+'record does not exist': 'záznam neexistuje',
+'record id': 'id záznamu',
+'register': 'registrovať',
+'selected': 'označených',
+'state': 'stav',
+'table': 'tabuľka',
+'unable to parse csv file': 'nedá sa načítať csv súbor',
+}

ADDED   applications/mobileblur/languages/zh-tw.py
Index: applications/mobileblur/languages/zh-tw.py
==================================================================
--- /dev/null
+++ applications/mobileblur/languages/zh-tw.py
@@ -0,0 +1,165 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"更新" 是選擇性的條件式, 格式就像 "欄位1=\'值\'". 但是 JOIN 的資料不可以使用 update 或是 delete"',
+'%Y-%m-%d': '%Y-%m-%d',
+'%Y-%m-%d %H:%M:%S': '%Y-%m-%d %H:%M:%S',
+'%s rows deleted': '已刪除 %s 筆',
+'%s rows updated': '已更新 %s 筆',
+'(something like "it-it")': '(格式類似 "zh-tw")',
+'A new version of web2py is available': '新版的 web2py 已發行',
+'A new version of web2py is available: %s': '新版的 web2py 已發行: %s',
+'ATTENTION: Login requires a secure (HTTPS) connection or running on localhost.': '注意: 登入管理帳號需要安全連線(HTTPS)或是在本機連線(localhost).',
+'ATTENTION: TESTING IS NOT THREAD SAFE SO DO NOT PERFORM MULTIPLE TESTS CONCURRENTLY.': '注意: 因為在測試模式不保證多執行緒安全性，也就是說不可以同時執行多個測試案例',
+'ATTENTION: you cannot edit the running application!': '注意:不可編輯正在執行的應用程式!',
+'About': '關於',
+'About application': '關於本應用程式',
+'Admin is disabled because insecure channel': '管理功能(Admin)在不安全連線環境下自動關閉',
+'Admin is disabled because unsecure channel': '管理功能(Admin)在不安全連線環境下自動關閉',
+'Administrator Password:': '管理員密碼:',
+'Are you sure you want to delete file "%s"?': '確定要刪除檔案"%s"?',
+'Are you sure you want to uninstall application "%s"': '確定要移除應用程式 "%s"',
+'Are you sure you want to uninstall application "%s"?': '確定要移除應用程式 "%s"',
+'Authentication': '驗證',
+'Available databases and tables': '可提供的資料庫和資料表',
+'Cannot be empty': '不可空白',
+'Cannot compile: there are errors in your app.        Debug it, correct errors and try again.': '無法編譯:應用程式中含有錯誤，請除錯後再試一次.',
+'Change Password': '變更密碼',
+'Check to delete': '打勾代表刪除',
+'Check to delete:': '點選以示刪除:',
+'Client IP': '客戶端網址(IP)',
+'Controller': '控件',
+'Controllers': '控件',
+'Copyright': '版權所有',
+'Create new application': '創建應用程式',
+'Current request': '目前網路資料要求(request)',
+'Current response': '目前網路資料回應(response)',
+'Current session': '目前網路連線資訊(session)',
+'DB Model': '資料庫模組',
+'DESIGN': '設計',
+'Database': '資料庫',
+'Date and Time': '日期和時間',
+'Delete': '刪除',
+'Delete:': '刪除:',
+'Deploy on Google App Engine': '配置到 Google App Engine',
+'Description': '描述',
+'Design for': '設計為了',
+'E-mail': '電子郵件',
+'EDIT': '編輯',
+'Edit': '編輯',
+'Edit Profile': '編輯設定檔',
+'Edit This App': '編輯本應用程式',
+'Edit application': '編輯應用程式',
+'Edit current record': '編輯當前紀錄',
+'Editing file': '編輯檔案',
+'Editing file "%s"': '編輯檔案"%s"',
+'Error logs for "%(app)s"': '"%(app)s"的錯誤紀錄',
+'First name': '名',
+'Functions with no doctests will result in [passed] tests.': '沒有 doctests 的函式會顯示 [passed].',
+'Group ID': '群組編號',
+'Hello World': '嗨! 世界',
+'Import/Export': '匯入/匯出',
+'Index': '索引',
+'Installed applications': '已安裝應用程式',
+'Internal State': '內部狀態',
+'Invalid Query': '不合法的查詢',
+'Invalid action': '不合法的動作(action)',
+'Invalid email': '不合法的電子郵件',
+'Language files (static strings) updated': '語言檔已更新',
+'Languages': '各國語言',
+'Last name': '姓',
+'Last saved on:': '最後儲存時間:',
+'Layout': '網頁配置',
+'License for': '軟體版權為',
+'Login': '登入',
+'Login to the Administrative Interface': '登入到管理員介面',
+'Logout': '登出',
+'Lost Password': '密碼遺忘',
+'Main Menu': '主選單',
+'Menu Model': '選單模組(menu)',
+'Models': '資料模組',
+'Modules': '程式模組',
+'NO': '否',
+'Name': '名字',
+'New Record': '新紀錄',
+'No databases in this application': '這應用程式不含資料庫',
+'Origin': '原文',
+'Original/Translation': '原文/翻譯',
+'Password': '密碼',
+"Password fields don't match": '密碼欄不匹配',
+'Peeking at file': '選擇檔案',
+'Powered by': '基於以下技術構建：',
+'Query:': '查詢:',
+'Record ID': '紀錄編號',
+'Register': '註冊',
+'Registration key': '註冊金鑰',
+'Remember me (for 30 days)': '記住我(30 天)',
+'Reset Password key': '重設密碼',
+'Resolve Conflict file': '解決衝突檔案',
+'Role': '角色',
+'Rows in table': '在資料表裏的資料',
+'Rows selected': '筆資料被選擇',
+'Saved file hash:': '檔案雜湊值已紀錄:',
+'Static files': '靜態檔案',
+'Stylesheet': '網頁風格檔',
+'Submit': '傳送',
+'Sure you want to delete this object?': '確定要刪除此物件?',
+'Table name': '資料表名稱',
+'Testing application': '測試中的應用程式',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': '"查詢"是一個像 "db.表1.欄位1==\'值\'" 的條件式. 以"db.表1.欄位1==db.表2.欄位2"方式則相當於執行 JOIN SQL.',
+'There are no controllers': '沒有控件(controllers)',
+'There are no models': '沒有資料庫模組(models)',
+'There are no modules': '沒有程式模組(modules)',
+'There are no static files': '沒有靜態檔案',
+'There are no translators, only default language is supported': '沒有翻譯檔,只支援原始語言',
+'There are no views': '沒有視圖',
+'This is the %(filename)s template': '這是%(filename)s檔案的樣板(template)',
+'Ticket': '問題單',
+'Timestamp': '時間標記',
+'Unable to check for upgrades': '無法做升級檢查',
+'Unable to download': '無法下載',
+'Unable to download app': '無法下載應用程式',
+'Update:': '更新:',
+'Upload existing application': '更新存在的應用程式',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': '使用下列方式來組合更複雜的條件式, (...)&(...) 代表同時存在的條件, (...)|(...) 代表擇一的條件, ~(...)則代表反向條件.',
+'User %(id)s Logged-in': '使用者 %(id)s 已登入',
+'User %(id)s Registered': '使用者 %(id)s 已註冊',
+'User ID': '使用者編號',
+'Verify Password': '驗證密碼',
+'View': '視圖',
+'Views': '視圖',
+'Welcome %s': '歡迎 %s',
+'Welcome to web2py': '歡迎使用 web2py',
+'YES': '是',
+'about': '關於',
+'appadmin is disabled because insecure channel': '因為來自非安全通道,管理介面關閉',
+'cache': '快取記憶體',
+'change password': '變更密碼',
+'Online examples': '點此處進入線上範例',
+'Administrative interface': '點此處進入管理介面',
+'customize me!': '請調整我!',
+'data uploaded': '資料已上傳',
+'database': '資料庫',
+'database %s select': '已選擇 %s 資料庫',
+'db': 'db',
+'design': '設計',
+'done!': '完成!',
+'edit profile': '編輯設定檔',
+'export as csv file': '以逗號分隔檔(csv)格式匯出',
+'insert new': '插入新資料',
+'insert new %s': '插入新資料 %s',
+'invalid request': '不合法的網路要求(request)',
+'login': '登入',
+'logout': '登出',
+'new record inserted': '已插入新紀錄',
+'next 100 rows': '往後 100 筆',
+'or import from csv file': '或是從逗號分隔檔(CSV)匯入',
+'previous 100 rows': '往前 100 筆',
+'record': '紀錄',
+'record does not exist': '紀錄不存在',
+'record id': '紀錄編號',
+'register': '註冊',
+'selected': '已選擇',
+'state': '狀態',
+'table': '資料表',
+'unable to parse csv file': '無法解析逗號分隔檔(csv)',
+}

ADDED   applications/mobileblur/models/0_helpers.py
Index: applications/mobileblur/models/0_helpers.py
==================================================================
--- /dev/null
+++ applications/mobileblur/models/0_helpers.py
@@ -0,0 +1,9 @@
+newsblur = local_import("newsblur")
+
+threshold = 0
+thresholds = ["nt", "ps", "ng"]  # indices -1, 0, 1 for negative, neutral, and positive intelligence filters
+
+def login(username="spiffytech"):
+    user = db(db.users.username==username).select().first()
+    if user["cookie"] is None:
+        results = newsblur.login(user["username"], user["password"])

ADDED   applications/mobileblur/models/db.py
Index: applications/mobileblur/models/db.py
==================================================================
--- /dev/null
+++ applications/mobileblur/models/db.py
@@ -0,0 +1,89 @@
+# -*- coding: utf-8 -*-
+# this file is released under public domain and you can use without limitations
+from gluon.custom_import import track_changes; track_changes(True)
+
+#########################################################################
+## This scaffolding model makes your app work on Google App Engine too
+#########################################################################
+
+if request.env.web2py_runtime_gae:            # if running on Google App Engine
+    db = DAL('google:datastore')              # connect to Google BigTable
+                                              # optional DAL('gae://namespace')
+    session.connect(request, response, db = db) # and store sessions and tickets there
+    ### or use the following lines to store sessions in Memcache
+    # from gluon.contrib.memdb import MEMDB
+    # from google.appengine.api.memcache import Client
+    # session.connect(request, response, db = MEMDB(Client()))
+else:                                         # else use a normal relational database
+    db = DAL('sqlite://storage.sqlite')       # if not, use SQLite or other DB
+
+# by default give a view/generic.extension to all actions from localhost
+# none otherwise. a pattern can be 'controller/function.extension'
+response.generic_patterns = ['*'] if request.is_local else []
+
+#########################################################################
+## Here is sample code if you need for
+## - email capabilities
+## - authentication (registration, login, logout, ... )
+## - authorization (role based authorization)
+## - services (xml, csv, json, xmlrpc, jsonrpc, amf, rss)
+## - crud actions
+## (more options discussed in gluon/tools.py)
+#########################################################################
+
+from gluon.tools import Mail, Auth, Crud, Service, PluginManager, prettydate
+mail = Mail()                                  # mailer
+auth = Auth(db)                                # authentication/authorization
+crud = Crud(db)                                # for CRUD helpers using auth
+service = Service()                            # for json, xml, jsonrpc, xmlrpc, amfrpc
+plugins = PluginManager()                      # for configuring plugins
+
+mail.settings.server = 'logging' or 'smtp.gmail.com:587'  # your SMTP server
+mail.settings.sender = 'you@gmail.com'         # your email
+mail.settings.login = 'username:password'      # your credentials or None
+
+auth.settings.hmac_key = ''   # before define_tables()
+auth.define_tables(username=True)                           # creates all needed tables
+auth.settings.mailer = mail                    # for user email verification
+auth.settings.registration_requires_verification = False
+auth.settings.registration_requires_approval = False
+auth.messages.verify_email = 'Click on the link http://'+request.env.http_host+URL('default','user',args=['verify_email'])+'/%(key)s to verify your email'
+auth.settings.reset_password_requires_verification = True
+auth.messages.reset_password = 'Click on the link http://'+request.env.http_host+URL('default','user',args=['reset_password'])+'/%(key)s to reset your password'
+
+#########################################################################
+## If you need to use OpenID, Facebook, MySpace, Twitter, Linkedin, etc.
+## register with janrain.com, uncomment and customize following
+# from gluon.contrib.login_methods.rpx_account import RPXAccount
+# auth.settings.actions_disabled = \
+#    ['register','change_password','request_reset_password']
+# auth.settings.login_form = RPXAccount(request, api_key='...',domain='...',
+#    url = "http://localhost:8000/%s/default/user/login" % request.application)
+## other login methods are in gluon/contrib/login_methods
+#########################################################################
+
+crud.settings.auth = None        # =auth to enforce authorization on crud
+
+#########################################################################
+## Define your tables below (or better in another model file) for example
+##
+## >>> db.define_table('mytable',Field('myfield','string'))
+##
+## Fields can be 'string','text','password','integer','double','boolean'
+##       'date','time','datetime','blob','upload', 'reference TABLENAME'
+## There is an implicit 'id integer autoincrement' field
+## Consult manual for more options, validators, etc.
+##
+## More API examples for controllers:
+##
+## >>> db.mytable.insert(myfield='value')
+## >>> rows=db(db.mytable.myfield=='value').select(db.mytable.ALL)
+## >>> for row in rows: print row.id, row.myfield
+#########################################################################
+
+db.define_table("users",
+    Field("username"),
+    Field("password"),
+    Field("cookie")
+)
+login()

ADDED   applications/mobileblur/models/menu.py
Index: applications/mobileblur/models/menu.py
==================================================================
--- /dev/null
+++ applications/mobileblur/models/menu.py
@@ -0,0 +1,126 @@
+# -*- coding: utf-8 -*-
+# this file is released under public domain and you can use without limitations
+#########################################################################
+## Customize your APP title, subtitle and menus here
+#########################################################################
+
+response.title = request.application
+response.subtitle = T('customize me!')
+
+#http://dev.w3.org/html5/markup/meta.name.html
+response.meta.author = 'you'
+response.meta.description = 'Free and open source full-stack enterprise framework for agile development of fast, scalable, secure and portable database-driven web-based applications. Written and programmable in Python'
+response.meta.keywords = 'web2py, python, framework'
+response.meta.generator = 'Web2py Enterprise Framework'
+response.meta.copyright = 'Copyright 2007-2010'
+
+
+##########################################
+## this is the main application menu
+## add/remove items as required
+##########################################
+
+response.menu = [
+    (T('Home'), False, URL('default','index'), [])
+    ]
+
+##########################################
+## this is here to provide shortcuts
+## during development. remove in production
+##
+## mind that plugins may also affect menu
+##########################################
+
+#########################################
+## Make your own menus
+##########################################
+
+response.menu+=[
+    (T('This App'), False, URL('admin', 'default', 'design/%s' % request.application),
+     [
+            (T('Controller'), False,
+             URL('admin', 'default', 'edit/%s/controllers/%s.py' \
+                     % (request.application,request.controller=='appadmin' and
+                        'default' or request.controller))),
+            (T('View'), False,
+             URL('admin', 'default', 'edit/%s/views/%s' \
+                     % (request.application,response.view))),
+            (T('Layout'), False,
+             URL('admin', 'default', 'edit/%s/views/layout.html' \
+                     % request.application)),
+            (T('Stylesheet'), False,
+             URL('admin', 'default', 'edit/%s/static/base.css' \
+                     % request.application)),
+            (T('DB Model'), False,
+             URL('admin', 'default', 'edit/%s/models/db.py' \
+                     % request.application)),
+            (T('Menu Model'), False,
+             URL('admin', 'default', 'edit/%s/models/menu.py' \
+                     % request.application)),
+            (T('Database'), False,
+             URL(request.application, 'appadmin', 'index')),
+
+            (T('Errors'), False,
+             URL('admin', 'default', 'errors/%s' \
+                     % request.application)),
+
+            (T('About'), False,
+             URL('admin', 'default', 'about/%s' \
+                     % request.application)),
+
+            ]
+   )]
+
+
+##########################################
+## this is here to provide shortcuts to some resources
+## during development. remove in production
+##
+## mind that plugins may also affect menu
+##########################################
+
+
+response.menu+=[(T('Resources'), False, None,
+     [
+    (T('Documentation'), False, 'http://www.web2py.com/book',
+        [
+        (T('Preface'), False, 'http://www.web2py.com/book/default/chapter/00'),
+        (T('Introduction'), False, 'http://www.web2py.com/book/default/chapter/01'),
+        (T('Python'), False, 'http://www.web2py.com/book/default/chapter/02'),
+        (T('Overview'), False, 'http://www.web2py.com/book/default/chapter/03'),
+        (T('The Core'), False, 'http://www.web2py.com/book/default/chapter/04'),
+        (T('The Views'), False, 'http://www.web2py.com/book/default/chapter/05'),
+        (T('Database'), False, 'http://www.web2py.com/book/default/chapter/06'),
+        (T('Forms and Validators'), False, 'http://www.web2py.com/book/default/chapter/07'),
+        (T('Access Control'), False, 'http://www.web2py.com/book/default/chapter/08'),
+        (T('Services'), False, 'http://www.web2py.com/book/default/chapter/09'),
+        (T('Ajax Recipes'), False, 'http://www.web2py.com/book/default/chapter/10'),
+        (T('Deployment Recipes'), False, 'http://www.web2py.com/book/default/chapter/11'),
+        (T('Other Recipes'), False, 'http://www.web2py.com/book/default/chapter/12'),
+        (T('Buy this book'), False, 'http://stores.lulu.com/web2py'),
+        ]),
+
+    (T('Community'), False, None,
+        [
+        (T('Groups'), False, 'http://www.web2py.com/examples/default/usergroups'),
+        (T('Twitter'), False, 'http://twitter.com/web2py'),
+        (T('Live chat'), False, 'http://mibbit.com/?channel=%23web2py&server=irc.mibbit.net'),
+        (T('User Voice'), False, 'http://web2py.uservoice.com/'),
+        ]),
+
+    (T('Web2py'), False, 'http://www.web2py.com',
+        [
+        (T('Download'), False, 'http://www.web2py.com/examples/default/download'),
+        (T('Support'), False, 'http://www.web2py.com/examples/default/support'),
+        (T('Quick Examples'), False, 'http://web2py.com/examples/default/examples'),
+        (T('FAQ'), False, 'http://web2py.com/AlterEgo'),
+        (T('Free Applications'), False, 'http://web2py.com/appliances'),
+        (T('Plugins'), False, 'http://web2py.com/plugins'),
+        (T('Recipes'), False, 'http://web2pyslices.com/'),
+        (T('Demo'), False, 'http://web2py.com/demo_admin'),
+        (T('Semantic'), False, 'http://web2py.com/semantic'),
+        (T('Layouts'), False, 'http://web2py.com/layouts'),
+        (T('Videos'), False, 'http://www.web2py.com/examples/default/videos/'),
+        ]),
+    ]
+   )]

ADDED   applications/mobileblur/modules/__init__.py
Index: applications/mobileblur/modules/__init__.py
==================================================================
--- /dev/null
+++ applications/mobileblur/modules/__init__.py

ADDED   applications/mobileblur/modules/newsblur.py
Index: applications/mobileblur/modules/newsblur.py
==================================================================
--- /dev/null
+++ applications/mobileblur/modules/newsblur.py
@@ -0,0 +1,339 @@
+#!/usr/bin/python
+
+"""newsblur.py - An API wrapper library for newsblur.com"""
+
+import simplejson
+
+import requests
+
+__author__ = 'Dananjaya Ramanayake , spiffytech '
+__version__ = "0.1"
+
+nb_url = "http://www.newsblur.com/"
+cookies = None
+
+from gluon import current
+print current.db
+
+def login(username,password):
+    '''
+    Login as an existing user.
+    If a user has no password set, you cannot just send any old password. 
+    Required parameters, username and password, must be of string type.
+    '''
+
+    url = nb_url + 'api/login'
+    results = requests.post(url, data={"username": username, "password": password})
+    global cookies
+    cookies = results.cookies
+    return simplejson.loads(results.content)
+
+def logout():
+    '''
+    Logout the currently logged in user.
+    '''
+
+    url = nb_url + 'api/logout'
+    results = requests.get(url, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def signup(username,password,email):
+    '''
+    Create a new user.
+    All three required parameters must be of type string.
+    '''
+
+    url = nb_url + 'api/signup'
+    payload = {'signup_username':username,'signup_password':password,'signup_email':email}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def search_feed(address,offset=1):
+    '''
+    
+    Retrieve information about a feed from its website or RSS address.
+    Parameter address must be of type string while parameter offset must be an integer.
+    Will return a feed.
+    
+    '''
+
+    url = nb_url + 'rss_feeds/search_feed'
+    payload = {'address':address,'offset':offset}
+    results = results.get(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def feeds(include_favicons=True,flat=False):
+    '''
+    Retrieve a list of feeds to which a user is actively subscribed.
+    Includes the 3 unread counts (positive, neutral, negative), as well as optional favicons.
+    '''
+    
+    url = nb_url + 'reader/feeds'
+    payload = {'include_favicons':include_favicons,'flat':flat}
+    results = requests.get(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+
+def favicons(feeds=[1,2,3]):
+    '''
+    Retrieve a list of favicons for a list of feeds. 
+    Used when combined with /reader/feeds and include_favicons=false, so the feeds request contains far less data. 
+    Useful for mobile devices, but requires a second request. 
+    '''
+    
+    url = nb_url + 'reader/favicons'
+    payload = {'feeds':feeds}
+    results = requests.get(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+    
+def id(id_no):
+    '''
+    Retrieve the original page from a single feed.
+    '''
+    
+    url = nb_url + 'reader/page/' % id_no
+    payload = {}
+    results = requests.get(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def refresh_feeds():
+    '''
+    Up-to-the-second unread counts for each active feed.
+    Poll for these counts no more than once a minute.
+    '''
+
+    url = nb_url + 'reader/refresh_feeds'
+    results = requests.get(url, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def feeds_trainer(feed_id):
+    '''
+    Retrieves all popular and known intelligence classifiers.
+    Also includes user's own classifiers.
+    '''
+
+    url = nb_url + 'reader/feeds_trainer'
+    payload = {'feed_id':feed_id}
+    results = requests.get(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def statistics(id_no):
+    '''
+    If you only want a user's classifiers, use /classifiers/:id.
+    Omit the feed_id to get all classifiers for all subscriptions.
+    '''
+
+    url = nb_url + 'rss_feeds/statistics/%d' % id_no
+    results = requests.get(url, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def feed_autocomplete(term):
+    '''
+    Get a list of feeds that contain a search phrase.
+    Searches by feed address, feed url, and feed title, in that order.
+    Will only show sites with 2+ subscribers.
+    '''
+
+    url = nb_url + 'rss_feeds/feed_autocomplete?%'
+    payload = {'term':term}
+    results = requests.get(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def feed(id):
+    '''
+    Retrieve stories from a single feed.
+    '''
+
+    url = nb_url + 'reader/feed/%s' % id
+    results = requests.get(url, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def starred_stories(page=1):
+    '''
+    Retrieve a user's starred stories.
+    '''
+    
+    url = nb_url + 'reader/starred_stories'
+    payload = {'page':page}
+    results = requests.get(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def river_stories(feeds,page=1,read_stories_count=0):
+    '''
+    Retrieve stories from a collection of feeds. This is known as the River of News.
+    Stories are ordered in reverse chronological order.
+    '''
+
+    url = nb_url + 'reader/river_stories'
+    payload = {'feeds':feeds,'page':page,'read_stories_count':read_stories_count}
+    results = urllib2.urlopen(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def mark_story_as_read(story_id,feed_id):
+    '''
+    Mark stories as read.
+    Multiple story ids can be sent at once.
+    Each story must be from the same feed.
+    '''
+
+    url = nb_url + 'reader/mark_story_as_read'
+    payload = {'story_id':story_id,'feed_id':feed_id}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def mark_story_as_starred(story_id,feed_id):
+    '''
+    Mark a story as starred (saved).
+    '''
+    
+    url = nb_url + 'reader/mark_story_as_starred'
+    payload = {'story_id':story_id,'feed_id':feed_id}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def mark_all_as_read(days=0):
+    '''
+    Mark all stories in a feed or list of feeds as read.
+    '''
+    
+    url = nb_url + 'reader/mark_all_as_read'
+    payload = {'days':days}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def add_url(url,folder='[Top Level]'):
+    '''
+    Add a feed by its URL. 
+    Can be either the RSS feed or the website itself.
+    '''
+    
+    url = nb_url + 'reader/add_url'
+    payload = {'url':url,'folder':folder}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+
+def add_folder(folder,parent_folder='[Top Level]'):
+    '''
+    Add a new folder.
+    '''
+    
+    url = nb_url + 'reader/add_folder'
+    payload = {'folder':folder,'parent_folder':parent_folder}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def rename_feed(feed_title,feed_id):
+    '''
+    Rename a feed title. Only the current user will see the new title.
+    '''
+    
+    url = nb_url + 'reader/rename_feed'
+    payload = {'feed_title':feed_title,'feed_id':feed_id}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def delete_feed(feed_id,in_folder):
+    '''
+    Unsubscribe from a feed. Removes it from the folder.
+    Set the in_folder parameter to remove a feed from the correct folder, in case the user is subscribed to the feed in multiple folders.
+    '''    
+
+    url = nb_url + 'reader/delete_feed'
+    payload = {'feed_id':feed_id,'in_folder':in_folder}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def rename_folder(folder_to_rename,new_folder_name,in_folder):
+    '''
+    Rename a folder.
+    '''
+    
+    url = nb_url + 'reader/rename_folder'
+    payload = {'folder_to_rename':folder_to_rename,'new_folder_name':new_folder_name,'in_folder':in_folder}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def delete_folder(folder_to_delete,in_folder,feed_id):
+    '''
+    Delete a folder and unsubscribe from all feeds inside.
+    '''
+    
+    url = nb_url + 'reader/delete_folder'
+    payload = {'folder_to_delete':folder_to_delete,'in_folder':in_folder,'feed_id':feed_id}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+
+def mark_feed_as_read(feed_id):
+    '''
+    Mark a list of feeds as read.
+    '''
+    
+    url = nb_url + 'reader/mark_feed_as_read'
+    payload = {'feed_id':feed_id}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+
+def save_feed_order(folders):
+    '''
+    Reorder feeds and move them around between folders.
+    The entire folder structure needs to be serialized.
+    '''
+
+    url = nb_url + 'reader/save_feed_order'
+    payload = {'folders':folders}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+
+def classifier(id_no):
+    '''
+    Get the intelligence classifiers for a user's site.
+    Only includes the user's own classifiers. 
+    Use /reader/feeds_trainer for popular classifiers.
+    '''
+
+    url = nb_url + 'classifier/%d' % id_no
+    results = requests.get(url)
+    return simplejson.loads(results.content)
+
+
+def classifier_save(like_type,dislike_type,remove_like_type,remove_dislike_type):
+    '''
+    Save intelligence classifiers (tags, titles, authors, and the feed) for a feed.
+    '''
+    
+    url = nb_url + 'classifier/save'
+    payload = {'like_[TYPE]':like_type,
+                   'dislike_[TYPE]':dislike_type,
+                    'remove_like_[TYPE]':remove_like_type,
+                   'remove_dislike_[TYPE]':remove_dislike_type}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+
+def opml_export():
+    '''
+    Download a backup of feeds and folders as an OPML file.
+    Contains folders and feeds in XML; useful for importing in another RSS reader.
+    '''
+    
+    url = nb_url + 'import/opml_export'
+    results = requests.get(url)
+    return simplejson.loads(results.content)
+
+
+
+def opml_upload(opml_file):
+    '''
+    Upload an OPML file.
+    '''
+    
+    url = nb_url + 'import/opml_upload'
+    f = open(opml_file)
+    payload = {'file':f}
+    f.close()
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)

ADDED   applications/mobileblur/modules/python-newsblur/LICENSE
Index: applications/mobileblur/modules/python-newsblur/LICENSE
==================================================================
--- /dev/null
+++ applications/mobileblur/modules/python-newsblur/LICENSE
@@ -0,0 +1,10 @@
+The MIT License
+
+Copyright (c) 2010-2011 Dananjaya Ramanayake dananjaya86@gmail.com.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+

ADDED   applications/mobileblur/modules/python-newsblur/MANIFEST
Index: applications/mobileblur/modules/python-newsblur/MANIFEST
==================================================================
--- /dev/null
+++ applications/mobileblur/modules/python-newsblur/MANIFEST
@@ -0,0 +1,5 @@
+LICENSE
+README.rst
+documentation.rst
+newsblur.py
+setup.py

ADDED   applications/mobileblur/modules/python-newsblur/README.rst
Index: applications/mobileblur/modules/python-newsblur/README.rst
==================================================================
--- /dev/null
+++ applications/mobileblur/modules/python-newsblur/README.rst
@@ -0,0 +1,23 @@
+===============
+python-newsblur
+===============
+
+A Python wrapper library for accessing API of newsblur.com.
+
+Copyright Dananjaya Ramanayake , released under the MIT license.
+
+Source: https://github.com/dananjayavr/python-newsblur
+
+For more information please check the newsblur.com API documentation at, http://www.newsblur.com/api
+
+
+Installation
+============
+To install run
+
+ ``python setup.py install``
+
+Usage:
+======
+
+Please read the documentation.rst file.

ADDED   applications/mobileblur/modules/python-newsblur/documentation.rst
Index: applications/mobileblur/modules/python-newsblur/documentation.rst
==================================================================
--- /dev/null
+++ applications/mobileblur/modules/python-newsblur/documentation.rst
@@ -0,0 +1,78 @@
+Login:
+
+  ``import newsblur``
+
+  ``newsblur.login('samuelclay','new$blur')``
+
+Output:
+
+  ``{"code": 1, "result": "ok"}``
+
+
+
+Logout:
+
+  ``newsblur.logout()``
+
+Output:
+
+  ``{"code": 1, "result": "ok"}``
+
+
+
+Signup:
+  
+  ``newsblur.signup('samuelclay','new$blur','samuel@ofbrooklyn.com')``
+
+Output (Successful):
+
+  ``{"code": 1, "result": "ok"}``
+
+Output (Unsuccessful):
+
+  ``{"code": -1, "result": "ok"}``
+
+
+
+Search Feed:
+
+  ``newsblur.search_feed('techcrunch.com')``
+
+Output:
+
+  ``{"feed_address": "http://www.techcrunch.com/author/mg/", "updated": "5077 hours", "subs": 1, "feed_link": "[]", "favicon_fetching": true, "feed_title": "TechCrunch \xc2\xbb MG Siegler", "exception_type": "feed", "exception_code": 404, "result": "ok", "has_exception": true, "id": 237525, "favicon_color": null}``
+
+
+
+Feeds:
+
+  ``newsblur.feeds()``
+
+Output:
+
+  ``{"flat_folders": {"Blogs": [{"ps": 0, "feed_link": "http://kottke.org/", "feed_title": "kottke.org", "ng": 0, "nt": 0, "id": 39}, {"ps": 0, "feed_link": "http://blog.newsblur.com/", "feed_title": "The NewsBlur Blog", "ng": 0, "nt": 0, "id": 558041}, {"ps": 0, "feed_link": "http://www.waxy.org/links/", "feed_title": "Waxy.org Links", "ng": 0, "nt": 0, "id": 3581}, {"ps": 0, "feed_link": "http://xkcd.com/", "feed_title": "xkcd.com", "ng": 0, "nt": 1, "id": 169}], "Cooking": [{"ps": 0, "feed_link": "http://americandrink.net/", "feed_title": "American Drink", "ng": 0, "nt": 0, "id": 64313}, {"ps": 0, "feed_link": "http://saltandfat.com/", "feed_title": "Salt & Fat", "ng": 0, "nt": 0, "id": 48}, {"ps": 1, "feed_link": "http://savorysweetlife.com", "feed_title": "Savory Sweet Life", "ng": 0, "nt": 0, "id": 45}, {"ps": 0, "feed_link": "http://smittenkitchen.com", "feed_title": "smitten kitchen", "ng": 0, "nt": 0, "id": 47}], "Blogs - Photoblogs": [{"ps": 0, "feed_link": "http://iconicphotos.wordpress.com", "feed_title": "Iconic Photos", "ng": 0, "nt": 0, "id": 50}, {"ps": 0, "feed_link": "http://blog.pictorymag.com/", "feed_title": "Pictory Blog", "ng": 0, "nt": 0, "id": 551953}, {"ps": 0, "feed_link": "http://theimpossiblecool.tumblr.com/", "feed_title": "the impossible cool.", "ng": 0, "nt": 1, "id": 34}], "New York": [{"ps": 2, "feed_link": "http://gothamist.com/", "feed_title": "Gothamist", "ng": 4, "nt": 17, "id": 23}, {"ps": 0, "feed_link": "http://www.scoutingny.com", "feed_title": "Scouting NY", "ng": 0, "nt": 0, "id": 27}], "Tech": [{"ps": 0, "feed_link": "http://www.codinghorror.com/blog/", "feed_title": "Coding Horror", "ng": 0, "nt": 0, "id": 2}, {"ps": 2, "feed_link": "http://news.ycombinator.com/", "feed_title": "Hacker News", "ng": 0, "nt": 133, "id": 6}, {"ps": 0, "feed_link": "http://www.macrumors.com", "feed_title": "MacRumors: Mac News and Rumors - Front Page", "ng": 0, "nt": 1, "id": 11}, {"ps": 2, "feed_link": "http://techcrunch.com", "feed_title": "TechCrunch", "ng": 0, "nt": 7, "id": 12}], "Absolute Reads": [{"ps": 0, "feed_link": "http://daringfireball.net/", "feed_title": "Daring Fireball", "ng": 0, "nt": 0, "id": 3}, {"ps": 1, "feed_link": "http://www.avc.com/a_vc/", "feed_title": "Fred Wilson: A VC", "ng": 0, "nt": 0, "id": 159}, {"ps": 0, "feed_link": "http://blog.louisgray.com/", "feed_title": "louisgray.com", "ng": 0, "nt": 0, "id": 172}, {"ps": 0, "feed_link": "http://www.marco.org/", "feed_title": "Marco.org", "ng": 0, "nt": 0, "id": 76}, {"ps": 0, "feed_link": "http://www.randsinrepose.com/", "feed_title": "Rands In Repose", "ng": 0, "nt": 0, "id": 38}]}, "user": "conesus", "result": "ok"}``
+
+
+
+Favicons:
+
+  ``newsblur.favicons()``
+  
+Output:
+
+  Will return a list of favicons
+
+
+
+Retrieve a Page from the Feed:
+
+  ``newsblur.id(32)``
+  
+Output:
+ 
+  Will return the HTML data of the story.
+
+
+
+  
+

ADDED   applications/mobileblur/modules/python-newsblur/newsblur.py
Index: applications/mobileblur/modules/python-newsblur/newsblur.py
==================================================================
--- /dev/null
+++ applications/mobileblur/modules/python-newsblur/newsblur.py
@@ -0,0 +1,339 @@
+#!/usr/bin/python
+
+"""newsblur.py - An API wrapper library for newsblur.com"""
+
+import simplejson
+
+import requests
+
+__author__ = 'Dananjaya Ramanayake , spiffytech '
+__version__ = "0.1"
+
+nb_url = "http://www.newsblur.com/"
+cookies = None
+
+from gluon import current
+print current.db
+
+def login(username,password):
+    '''
+    Login as an existing user.
+    If a user has no password set, you cannot just send any old password. 
+    Required parameters, username and password, must be of string type.
+    '''
+
+    url = nb_url + 'api/login'
+    results = requests.post(url, data={"username": username, "password": password})
+    global cookies
+    cookies = results.cookies
+    return simplejson.loads(results.content)
+
+def logout():
+    '''
+    Logout the currently logged in user.
+    '''
+
+    url = nb_url + 'api/logout'
+    results = requests.get(url, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def signup(username,password,email):
+    '''
+    Create a new user.
+    All three required parameters must be of type string.
+    '''
+
+    url = nb_url + 'api/signup'
+    payload = {'signup_username':username,'signup_password':password,'signup_email':email}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def search_feed(address,offset=1):
+    '''
+    
+    Retrieve information about a feed from its website or RSS address.
+    Parameter address must be of type string while parameter offset must be an integer.
+    Will return a feed.
+    
+    '''
+
+    url = nb_url + 'rss_feeds/search_feed'
+    payload = {'address':address,'offset':offset}
+    results = results.get(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def feeds(include_favicons=True,flat=False):
+    '''
+    Retrieve a list of feeds to which a user is actively subscribed.
+    Includes the 3 unread counts (positive, neutral, negative), as well as optional favicons.
+    '''
+    
+    url = nb_url + 'reader/feeds'
+    payload = {'include_favicons':include_favicons,'flat':flat}
+    results = requests.get(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+
+def favicons(feeds=[1,2,3]):
+    '''
+    Retrieve a list of favicons for a list of feeds. 
+    Used when combined with /reader/feeds and include_favicons=false, so the feeds request contains far less data. 
+    Useful for mobile devices, but requires a second request. 
+    '''
+    
+    url = nb_url + 'reader/favicons'
+    payload = {'feeds':feeds}
+    results = requests.get(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+    
+def id(id_no):
+    '''
+    Retrieve the original page from a single feed.
+    '''
+    
+    url = nb_url + 'reader/page/' % id_no
+    payload = {}
+    results = requests.get(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def refresh_feeds():
+    '''
+    Up-to-the-second unread counts for each active feed.
+    Poll for these counts no more than once a minute.
+    '''
+
+    url = nb_url + 'reader/refresh_feeds'
+    results = requests.get(url, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def feeds_trainer(feed_id):
+    '''
+    Retrieves all popular and known intelligence classifiers.
+    Also includes user's own classifiers.
+    '''
+
+    url = nb_url + 'reader/feeds_trainer'
+    payload = {'feed_id':feed_id}
+    results = requests.get(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def statistics(id_no):
+    '''
+    If you only want a user's classifiers, use /classifiers/:id.
+    Omit the feed_id to get all classifiers for all subscriptions.
+    '''
+
+    url = nb_url + 'rss_feeds/statistics/%d' % id_no
+    results = requests.get(url, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def feed_autocomplete(term):
+    '''
+    Get a list of feeds that contain a search phrase.
+    Searches by feed address, feed url, and feed title, in that order.
+    Will only show sites with 2+ subscribers.
+    '''
+
+    url = nb_url + 'rss_feeds/feed_autocomplete?%'
+    payload = {'term':term}
+    results = requests.get(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def feed(id):
+    '''
+    Retrieve stories from a single feed.
+    '''
+
+    url = nb_url + 'reader/feed/%s' % id
+    results = requests.get(url, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def starred_stories(page=1):
+    '''
+    Retrieve a user's starred stories.
+    '''
+    
+    url = nb_url + 'reader/starred_stories'
+    payload = {'page':page}
+    results = requests.get(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def river_stories(feeds,page=1,read_stories_count=0):
+    '''
+    Retrieve stories from a collection of feeds. This is known as the River of News.
+    Stories are ordered in reverse chronological order.
+    '''
+
+    url = nb_url + 'reader/river_stories'
+    payload = {'feeds':feeds,'page':page,'read_stories_count':read_stories_count}
+    results = urllib2.urlopen(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def mark_story_as_read(story_id,feed_id):
+    '''
+    Mark stories as read.
+    Multiple story ids can be sent at once.
+    Each story must be from the same feed.
+    '''
+
+    url = nb_url + 'reader/mark_story_as_read'
+    payload = {'story_id':story_id,'feed_id':feed_id}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def mark_story_as_starred(story_id,feed_id):
+    '''
+    Mark a story as starred (saved).
+    '''
+    
+    url = nb_url + 'reader/mark_story_as_starred'
+    payload = {'story_id':story_id,'feed_id':feed_id}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def mark_all_as_read(days=0):
+    '''
+    Mark all stories in a feed or list of feeds as read.
+    '''
+    
+    url = nb_url + 'reader/mark_all_as_read'
+    payload = {'days':days}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def add_url(url,folder='[Top Level]'):
+    '''
+    Add a feed by its URL. 
+    Can be either the RSS feed or the website itself.
+    '''
+    
+    url = nb_url + 'reader/add_url'
+    payload = {'url':url,'folder':folder}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+
+def add_folder(folder,parent_folder='[Top Level]'):
+    '''
+    Add a new folder.
+    '''
+    
+    url = nb_url + 'reader/add_folder'
+    payload = {'folder':folder,'parent_folder':parent_folder}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def rename_feed(feed_title,feed_id):
+    '''
+    Rename a feed title. Only the current user will see the new title.
+    '''
+    
+    url = nb_url + 'reader/rename_feed'
+    payload = {'feed_title':feed_title,'feed_id':feed_id}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def delete_feed(feed_id,in_folder):
+    '''
+    Unsubscribe from a feed. Removes it from the folder.
+    Set the in_folder parameter to remove a feed from the correct folder, in case the user is subscribed to the feed in multiple folders.
+    '''    
+
+    url = nb_url + 'reader/delete_feed'
+    payload = {'feed_id':feed_id,'in_folder':in_folder}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def rename_folder(folder_to_rename,new_folder_name,in_folder):
+    '''
+    Rename a folder.
+    '''
+    
+    url = nb_url + 'reader/rename_folder'
+    payload = {'folder_to_rename':folder_to_rename,'new_folder_name':new_folder_name,'in_folder':in_folder}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+def delete_folder(folder_to_delete,in_folder,feed_id):
+    '''
+    Delete a folder and unsubscribe from all feeds inside.
+    '''
+    
+    url = nb_url + 'reader/delete_folder'
+    payload = {'folder_to_delete':folder_to_delete,'in_folder':in_folder,'feed_id':feed_id}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+
+def mark_feed_as_read(feed_id):
+    '''
+    Mark a list of feeds as read.
+    '''
+    
+    url = nb_url + 'reader/mark_feed_as_read'
+    payload = {'feed_id':feed_id}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+
+def save_feed_order(folders):
+    '''
+    Reorder feeds and move them around between folders.
+    The entire folder structure needs to be serialized.
+    '''
+
+    url = nb_url + 'reader/save_feed_order'
+    payload = {'folders':folders}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+
+def classifier(id_no):
+    '''
+    Get the intelligence classifiers for a user's site.
+    Only includes the user's own classifiers. 
+    Use /reader/feeds_trainer for popular classifiers.
+    '''
+
+    url = nb_url + 'classifier/%d' % id_no
+    results = requests.get(url)
+    return simplejson.loads(results.content)
+
+
+def classifier_save(like_type,dislike_type,remove_like_type,remove_dislike_type):
+    '''
+    Save intelligence classifiers (tags, titles, authors, and the feed) for a feed.
+    '''
+    
+    url = nb_url + 'classifier/save'
+    payload = {'like_[TYPE]':like_type,
+                   'dislike_[TYPE]':dislike_type,
+                    'remove_like_[TYPE]':remove_like_type,
+                   'remove_dislike_[TYPE]':remove_dislike_type}
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)
+
+
+def opml_export():
+    '''
+    Download a backup of feeds and folders as an OPML file.
+    Contains folders and feeds in XML; useful for importing in another RSS reader.
+    '''
+    
+    url = nb_url + 'import/opml_export'
+    results = requests.get(url)
+    return simplejson.loads(results.content)
+
+
+
+def opml_upload(opml_file):
+    '''
+    Upload an OPML file.
+    '''
+    
+    url = nb_url + 'import/opml_upload'
+    f = open(opml_file)
+    payload = {'file':f}
+    f.close()
+    results = requests.post(url, data=payload, cookies=cookies)
+    return simplejson.loads(results.content)

ADDED   applications/mobileblur/modules/python-newsblur/setup.py
Index: applications/mobileblur/modules/python-newsblur/setup.py
==================================================================
--- /dev/null
+++ applications/mobileblur/modules/python-newsblur/setup.py
@@ -0,0 +1,23 @@
+from setuptools import setup
+from newsblur import __version__
+
+long_description = open('README.rst').read()
+
+setup(name='newsblur',
+      version=__version__,
+      py_modules=['newsblur'],
+      description='API Wrapper library for newsblur.com',
+      author='Dananjaya Ramanayake',
+      author_email='dananjaya86@gmail.com',
+      license='MIT',
+      url='',
+      long_description=long_description,
+      platforms=['any'],
+      classifiers=['Development Status :: 1 - Beta',
+	           'Intended Audience :: Developers',
+		   'License :: OSI Approved :: MIT License',
+                   'Operating System :: OS Independent',
+		   'Programming Language :: Python',
+		   'Topic :: Internet :: WWW/HTTP :: News/RSS',
+		  ],
+      )

ADDED   applications/mobileblur/static/css/base.css
Index: applications/mobileblur/static/css/base.css
==================================================================
--- /dev/null
+++ applications/mobileblur/static/css/base.css
@@ -0,0 +1,556 @@
+@charset "UTF-8";
+
+/* This file is contains the following sections:
+
+Update: Revision: 20101102 by Martin Mulone
+
+- The new revision contains:
+- Html5, good practice and normalization support.
+- Diferent hacks.
+- The normalization and some tags come from
+  diferent sites so i keep the credits and comments.
+  but the base of support html5 come from:
+  http://html5boilerplate.com/
+
+- ez.css (http://www.ez-css.org/layouts)
+- reset common tags
+- choose default fonts
+- choose link style
+- add bottom line to table rows
+- labels bold and occasionally centered
+- make all input fields the same size
+- add proper separation between h1-h6 and text
+- always indent the first line and add space below paragraphs
+- bullets and numbers style and indent
+- form and table padding
+- code blocks
+- left and right padding to quoted text
+- page layout alignment, width and padding (change this for spaces)
+- column widths (change this to use left_sidebar and right_sidebar)
+- backrgound images and colors (change this for colors)
+- web2py specific (.flash, .error)
+
+Notice:
+- even if you use a different layout/css you may need classes .flash and .error
+- this is all color neutral except for #349C01 (header, links, lines)
+- there are two backrgound images: images/background.png and images/header.png
+
+License: This file is released under BSD and MIT
+
+*/
+
+/*     
+  credit is left where credit is due.
+  additionally, much inspiration was taken from these projects:
+    yui.yahooapis.com/2.8.1/build/base/base.css
+    camendesign.com/design/
+    praegnanz.de/weblog/htmlcssjs-kickstart
+*/
+
+/* 
+  html5doctor.com Reset Stylesheet (Eric Meyer's Reset Reloaded + HTML5 baseline)
+  v1.4 2009-07-27 | Authors: Eric Meyer & Richard Clark
+  html5doctor.com/html-5-reset-stylesheet/
+*/
+
+html, body, div, span, object, iframe,
+h1, h2, h3, h4, h5, h6, p, blockquote, pre,
+abbr, address, cite, code,
+del, dfn, em, img, ins, kbd, q, samp,
+small, strong, sub, sup, var,
+b, i,
+dl, dt, dd, ol, ul, li,
+fieldset, form, label, legend,
+table, caption, tbody, tfoot, thead, tr, th, td,
+article, aside, canvas, details, figcaption, figure, 
+footer, header, hgroup, menu, nav, section, summary,
+time, mark, audio, video {
+  margin:0;
+  padding:0;
+  border:0;
+  outline:0;
+  font-size:100%;
+  vertical-align:baseline;
+  background:transparent;
+}                  
+
+article, aside, details, figcaption, figure,
+footer, header, hgroup, menu, nav, section { 
+    display:block;
+}
+
+nav ul { list-style:none; }
+
+blockquote, q { quotes:none; }
+
+blockquote:before, blockquote:after,
+q:before, q:after { content:''; content:none; }
+
+a { margin:0; padding:0; font-size:100%; vertical-align:baseline; background:transparent; }
+a:hover { text-decoration: underline }
+
+ins { background-color:#ff9; color:#000; text-decoration:none; }
+
+mark { background-color:#ff9; color:#000; font-style:italic; font-weight:bold; }
+
+del { text-decoration: line-through; }
+
+abbr[title], dfn[title] { border-bottom:1px dotted #000; cursor:help; }
+
+/* tables still need cellspacing="0" in the markup */
+table { border-collapse:collapse; border-spacing:0; }
+
+hr { display:block; height:1px; border:0; border-top:1px solid #ccc; margin:1em 0; padding:0; }
+
+input, select { vertical-align:middle; }
+/* END RESET CSS */
+
+
+/*
+fonts.css from the YUI Library: developer.yahoo.com/yui/
+          Please refer to developer.yahoo.com/yui/fonts/ for font sizing percentages
+
+There are three custom edits:
+ * remove arial, helvetica from explicit font stack
+ * make the line-height relative and unit-less
+ * remove the pre, code styles
+*/
+body { font:13px/1.231 sans-serif; *font-size:small; } /* hack retained to preserve specificity */
+
+/*table { font-size:inherit; font:100%; }*/
+
+select, input, textarea, button { font:99% sans-serif; }
+
+
+/* normalize monospace sizing 
+ * en.wikipedia.org/wiki/MediaWiki_talk:Common.css/Archive_11#Teletype_style_fix_for_Chrome
+ */
+pre, code, kbd, samp { font-family: monospace, sans-serif; }
+
+/* 
+ * minimal base styles 
+ */
+
+/* #444 looks better than black: twitter.com/H_FJ/statuses/11800719859 */ 
+body, select, input, textarea { color:#444; }
+
+/* Headers (h1,h2,etc) have no default font-size or margin,
+   you'll want to define those yourself. */ 
+ 
+/* www.aestheticallyloyal.com/public/optimize-legibility/ */ 
+h1,h2,h3,h4,h5,h6 { font-weight: bold; }
+
+/* always force a scrollbar in non-IE */ 
+html { overflow-y: scroll; }
+ 
+/* Accessible focus treatment: people.opera.com/patrickl/experiments/keyboard/test */
+a:hover, a:active { outline: none; }
+
+a, a:active, a:visited { color:#607890; }
+a:hover { color:#036; }
+
+ul, ol { margin-left: 1.8em; }
+ol { list-style-type: decimal; }
+
+/* Remove margins for navigation lists */
+nav ul, nav li { margin: 0; } 
+
+small { font-size:85%; }
+strong, th { font-weight: bold; }
+
+td, td img { vertical-align:top; } 
+
+sub { vertical-align: sub; font-size: smaller; }
+sup { vertical-align: super; font-size: smaller; }
+
+pre { 
+  padding: 15px; 
+  
+  /* www.pathf.com/blogs/2008/05/formatting-quoted-code-in-blog-posts-css21-white-space-pre-wrap/ */
+  white-space: pre; /* CSS2 */
+  white-space: pre-wrap; /* CSS 2.1 */
+  white-space: pre-line; /* CSS 3 (and 2.1 as well, actually) */
+  word-wrap: break-word; /* IE */
+}
+
+textarea { overflow: auto; } /* thnx ivannikolic! www.sitepoint.com/blogs/2010/08/20/ie-remove-textarea-scrollbars/ */
+
+.ie6 legend, .ie7 legend { margin-left: -7px; } /* thnx ivannikolic! */
+
+/* align checkboxes, radios, text inputs with their label
+   by: Thierry Koblentz tjkdesign.com/ez-css/css/base.css  */
+input[type="radio"] { vertical-align: text-bottom; }
+input[type="checkbox"] { vertical-align: bottom; }
+.ie7 input[type="checkbox"] { vertical-align: baseline; }
+.ie6 input { vertical-align: text-bottom; }
+
+/* hand cursor on clickable input elements */
+label, input[type=button], input[type=submit], button { cursor: pointer; }
+
+/* webkit browsers add a 2px margin outside the chrome of form elements */  
+button, input, select, textarea { margin: 0; }
+
+/* colors for form validity */
+input:valid, textarea:valid   {  }
+input:invalid, textarea:invalid { 
+      border-radius: 1px;
+    -moz-box-shadow: 0px 0px 5px red; 
+ -webkit-box-shadow: 0px 0px 5px red; 
+         box-shadow: 0px 0px 5px red;
+}
+.no-boxshadow input:invalid, 
+.no-boxshadow textarea:invalid { background-color: #f0dddd; }
+
+
+/* These selection declarations have to be separate.
+   No text-shadow: twitter.com/miketaylr/status/12228805301 
+   Also: hot pink. */
+::-moz-selection{ background: #555; color:#fff; text-shadow: none; }
+::selection { background:#555; color:#fff; text-shadow: none; } 
+
+/*  j.mp/webkit-tap-highlight-color */
+a:link { -webkit-tap-highlight-color: #555; } 
+
+
+/* make buttons play nice in IE:    
+   www.viget.com/inspire/styling-the-button-element-in-internet-explorer/ */
+button {  width: auto; overflow: visible; }
+ 
+/* bicubic resizing for non-native sized IMG: 
+   code.flickr.com/blog/2008/11/12/on-ui-quality-the-little-things-client-side-image-resizing/ */
+.ie7 img { -ms-interpolation-mode: bicubic; }
+
+/* 
+ * Non-semantic helper classes 
+ */
+
+/* for image replacement */
+.ir { display:block; text-indent:-999em; overflow:hidden; background-repeat: no-repeat; }
+
+/* Hide for both screenreaders and browsers
+   css-discuss.incutio.com/wiki/Screenreader_Visibility */
+.hidden { display:none; } 
+
+/* Hide only visually, but have it available for screenreaders 
+   www.webaim.org/techniques/css/invisiblecontent/ 
+   Solution from: j.mp/visuallyhidden - Thanks Jonathan Neal! */
+.visuallyhidden { position:absolute !important;    
+  clip: rect(1px 1px 1px 1px); /* IE6, IE7 */
+  clip: rect(1px, 1px, 1px, 1px); }
+
+/* Hide visually and from screenreaders, but maintain layout */
+.invisible { visibility: hidden; }
+
+/* >> The Magnificent CLEARFIX: Updated to prevent margin-collapsing on child elements << j.mp/bestclearfix */
+.clearfix:before, .clearfix:after {
+  content: "\0020"; display: block; height: 0; visibility: hidden;    
+} 
+
+.clearfix:after { clear: both; }
+/* Fix clearfix: blueprintcss.lighthouseapp.com/projects/15318/tickets/5-extra-margin-padding-bottom-of-page */
+.clearfix { zoom: 1; }
+
+
+/*********** layout info (ez.css) ***********/
+/* 2009 -2010 (c) | ez-css.org
+ * ez-plug-min.css :: version 1.1 :: 01182010
+ */
+.ez-wr:after,.ez-box:after{content:".";display:block;height:0;clear:both;visibility:hidden}.ez-wr,.ez-box,.ez-last{display:inline-block;min-height:0}/* \*/ * html .ez-wr,* html .ez-box,* html .ez-last{height:1%}.ez-wr,.ez-box,.ez-last{display:block}/* */.ez-oh{overflow:hidden}* html .ez-oh{overflow:visible}.ez-oa{overflow:auto}.ez-dt{display:table}.ez-it{display:inline-table}.ez-tc{display:table-cell}.ez-ib{display:inline-block}.ez-fl{float:left}* html .ez-fl{margin-right:-3px}.ez-fr{float:right}* html .ez-fr{margin-left:-3px}.ez-25{width:25%}.ez-33{width:33.33%}.ez-50{width:50%}.ez-66{width:66.66%}.ez-75{width:75%}.ez-negmr{margin-right:-1px}* html .ez-negmr{margin-right:-4px}.ez-negmx{margin-right:-1px}.ez-negml{margin-left:-1px}* html .ez-negml{margin-left:-4px}
+
+
+/*********** add bottom line to table rows ***********/
+th, td { padding: 0.1em 0.5em 0.1em 0.5em;}
+
+/*********** labels bold and occasionally centered ***********/
+label {
+    white-space: nowrap;
+}
+label, b, th {
+    font-weight: bold;
+}
+thead th {
+    text-align: center;
+    border-bottom: 1px solid #444;
+}
+/*********** forms and table padding ***********/
+form, table {
+   padding: 5px 10px 5px 10px;
+}
+
+/*********** code blocks ***********/
+code {
+   padding: 3px 5px;
+   font-family: Andale Mono, monospace;
+   font-size: 0.9em;
+}
+
+/*********** left and right padding to quoted text ***********/
+blockquote {
+   background: #cccccc;
+   border-left: 30px transparent;
+   border-right: 30px transparent;
+   /*padding: 5px;*/
+}
+
+input[type=text], input[type=password], textarea, select {
+    margin: 2px 15px 2px 5px;
+    width: 280px;      
+    background: #fff;
+    color: #555;
+    border: 1px solid #dedede; 
+    -moz-border-radius: 2px;
+    -webkit-border-radius: 2px;
+    border-radius: 2px;       
+    font-size: 12px;
+}
+
+input[type=text], input[type=password] {
+    height: 16px;  
+}
+
+select[multiple=multiple] {
+    height: 90px;  
+}
+
+input[type=submit], input[type=button], button {
+    margin: 0px;
+    /*width: 85px;*/
+    height: 22px;    
+    background: #eaeaea;
+    color: #555;
+    border: 1px solid #dedede;
+    -moz-border-radius: 2px;
+    -webkit-border-radius: 2px;
+    border-radius: 2px;    
+}
+
+fieldset { border: 1px solid #dedede; padding: 6px; }
+legend { font-weight: bold; }
+
+input:focus, textarea:focus { background: #fafafa; }
+
+p {text-indent:30px;}
+
+p, blockquote {    
+    margin-bottom: 10px;
+}
+
+h1,h2,h3,h4,h5,h6 { line-height: 170%; }
+h1 {font-size: 2.0em;}
+h2 {font-size: 1.8em;}
+h3 {font-size: 1.4em;}
+h4 {font-size: 1.2em;}
+h5 {font-size: 1.0em;}
+h6 {font-size: 0.8em;}
+
+/*********** page layout alignment, width and padding ***********/
+/*body {background-color: #000;}*/
+#container, #header, #page, #content, #statusbar,
+#footer, #wrapper { display:block; line-height: 170%; }
+#wrapper {width: 900px;}
+#container {
+    margin: 0 auto;
+    padding: 0;
+}
+#wrapper {margin: 0 auto;} 
+#wrapper {background-color: #fff; padding: 5px;} 
+#statusbar { margin: 5px 0px 20px 0px;}
+#footer {    
+    margin-top: 30px;    
+    padding: 5px;    
+}
+#statusbar, #footer {    
+    background: #eaeaea; 
+    border-top: 1px #aaa solid;    
+}
+#logo {
+    width: 68px;
+    height: 62px;
+    background: url(../images/logo.png);
+}
+#appname {
+    color: #cccccc;
+}
+
+#right_sidebar { width: 160px; float:right; display: none; }
+#left_sidebar { width: 160px; float:left; display: none; }
+#content { float: left; /*width: 740px;*//*width: 63%;*/ /*width: 640px; float:left;*/ } /* uncomment this if you are going to use sidebars */
+ 
+.auth_navbar {
+   top: 0px;
+   float: right;
+   padding: 3px 10px 3px 10px; 
+}
+
+/*********** web2py specific ***********/
+div.flash {
+    font-weight: bold;
+    display: none;
+    position: fixed;    
+    padding: 10px;
+    top: 40px;
+    right: 10px;
+    min-width: 280px;
+    opacity: 0.85;
+    margin: 0px 0px 10px 10px;    
+    color: #fff;    
+    vertical-align: middle;
+    cursor: pointer;
+    background: #000;
+    border: 2px solid #fff;
+    -moz-border-radius: 5px;
+    -webkit-border-radius: 5px;
+    z-index: 2;
+}
+div.error {
+    background-color: red;
+    color: white;
+    padding: 3px;
+}
+
+/***************************
+ * CSS 3 Buttons
+ * http://github.com/michenriksen/css3buttons
+ * created by Michael Henriksen
+ * License: Unlicense 
+ * 
+ * *******************/
+
+a.button { display: inline-block; padding: 3px 5px 3px 5px; font-family: 'lucida grande', tahoma, verdana, arial, sans-serif; font-size: 12px; color: #3C3C3D; text-shadow: 1px 1px 0 #FFFFFF; background: #ECECEC url('../images/css3buttons_backgrounds.png') 0 0 no-repeat; white-space: nowrap; overflow: visible; cursor: pointer; text-decoration: none; border: 1px solid #CACACA; -webkit-border-radius: 2px; -moz-border-radius: 2px; -webkit-background-clip: padding-box; border-radius: 2px; outline: none; position: relative; zoom: 1; *display: inline; }
+a.button.primary { font-weight: bold }
+a.button:hover { color: #FFFFFF; border-color: #388AD4; text-decoration: none; text-shadow: -1px -1px 0 rgba(0,0,0,0.3); background-position: 0 -40px; background-color: #2D7DC5; }
+a.button:active,
+a.button.active { background-position: 0 -81px; border-color: #347BBA; background-color: #0F5EA2; color: #FFFFFF; text-shadow: none; }
+a.button:active { top: 1px }
+a.button.negative:hover { color: #FFFFFF; background-position: 0 -121px; background-color: #D84743; border-color: #911D1B; }
+a.button.negative:active,
+a.button.negative.active { background-position: 0 -161px; background-color: #A5211E; border-color: #911D1B; }
+a.button.pill { -webkit-border-radius: 19px; -moz-border-radius: 19px; border-radius: 19px; padding: 2px 10px 2px 10px; }
+a.button.left { -webkit-border-bottom-right-radius: 0px; -webkit-border-top-right-radius: 0px; -moz-border-radius-bottomright: 0px; -moz-border-radius-topright: 0px; border-bottom-right-radius: 0px; border-top-right-radius: 0px; margin-right: 0px; }
+a.button.middle { margin-right: 0px; margin-left: 0px; -webkit-border-radius: 0px; -moz-border-radius: 0px; border-radius: 0px; border-right: none; border-left: none; }
+a.button.right { -webkit-border-bottom-left-radius: 0px; -webkit-border-top-left-radius: 0px; -moz-border-radius-bottomleft: 0px; -moz-border-radius-topleft: 0px; border-top-left-radius: 0px; border-bottom-left-radius: 0px; margin-left: 0px; }
+a.button.left:active,
+a.button.middle:active,
+a.button.right:active { top: 0px }
+a.button.big { font-size: 16px; padding-left: 17px; padding-right: 17px; }
+a.button span.icon { display: inline-block; width: 14px; height: 12px; margin: auto 7px auto auto; position: relative; top: 2px; background-image: url('../images/css3buttons_icons.png'); background-repeat: no-repeat; }
+a.big.button span.icon { top: 0px }
+a.button span.icon.book { background-position: 0 0 }
+a.button:hover span.icon.book { background-position: 0 -15px }
+a.button span.icon.calendar { background-position: 0 -30px }
+a.button:hover span.icon.calendar { background-position: 0 -45px }
+a.button span.icon.chat { background-position: 0 -60px }
+a.button:hover span.icon.chat { background-position: 0 -75px }
+a.button span.icon.check { background-position: 0 -90px }
+a.button:hover span.icon.check { background-position: 0 -103px }
+a.button span.icon.clock { background-position: 0 -116px }
+a.button:hover span.icon.clock { background-position: 0 -131px }
+a.button span.icon.cog { background-position: 0 -146px }
+a.button:hover span.icon.cog { background-position: 0 -161px }
+a.button span.icon.comment { background-position: 0 -176px }
+a.button:hover span.icon.comment { background-position: 0 -190px }
+a.button span.icon.cross { background-position: 0 -204px }
+a.button:hover span.icon.cross { background-position: 0 -219px }
+a.button span.icon.downarrow { background-position: 0 -234px }
+a.button:hover span.icon.downarrow { background-position: 0 -249px }
+a.button span.icon.fork { background-position: 0 -264px }
+a.button:hover span.icon.fork { background-position: 0 -279px }
+a.button span.icon.heart { background-position: 0 -294px }
+a.button:hover span.icon.heart { background-position: 0 -308px }
+a.button span.icon.home { background-position: 0 -322px }
+a.button:hover span.icon.home { background-position: 0 -337px }
+a.button span.icon.key { background-position: 0 -352px }
+a.button:hover span.icon.key { background-position: 0 -367px }
+a.button span.icon.leftarrow { background-position: 0 -382px }
+a.button:hover span.icon.leftarrow { background-position: 0 -397px }
+a.button span.icon.lock { background-position: 0 -412px }
+a.button:hover span.icon.lock { background-position: 0 -427px }
+a.button span.icon.loop { background-position: 0 -442px }
+a.button:hover span.icon.loop { background-position: 0 -457px }
+a.button span.icon.magnifier { background-position: 0 -472px }
+a.button:hover span.icon.magnifier { background-position: 0 -487px }
+a.button span.icon.mail { background-position: 0 -502px }
+a.button:hover span.icon.mail { background-position: 0 -514px }
+a.button span.icon.move { background-position: 0 -526px }
+a.button:hover span.icon.move { background-position: 0 -541px }
+a.button span.icon.pen { background-position: 0 -556px }
+a.button:hover span.icon.pen { background-position: 0 -571px }
+a.button span.icon.pin { background-position: 0 -586px }
+a.button:hover span.icon.pin { background-position: 0 -601px }
+a.button span.icon.plus { background-position: 0 -616px }
+a.button:hover span.icon.plus { background-position: 0 -631px }
+a.button span.icon.reload { background-position: 0 -646px }
+a.button:hover span.icon.reload { background-position: 0 -660px }
+a.button span.icon.rightarrow { background-position: 0 -674px }
+a.button:hover span.icon.rightarrow { background-position: 0 -689px }
+a.button span.icon.rss { background-position: 0 -704px }
+a.button:hover span.icon.rss { background-position: 0 -719px }
+a.button span.icon.tag { background-position: 0 -734px }
+a.button:hover span.icon.tag { background-position: 0 -749px }
+a.button span.icon.trash { background-position: 0 -764px }
+a.button:hover span.icon.trash { background-position: 0 -779px }
+a.button span.icon.unlock { background-position: 0 -794px }
+a.button:hover span.icon.unlock { background-position: 0 -809px }
+a.button span.icon.uparrow { background-position: 0 -824px }
+a.button:hover span.icon.uparrow { background-position: 0 -839px }
+a.button span.icon.user { background-position: 0 -854px }
+a.button:hover span.icon.user { background-position: 0 -869px }
+
+
+
+
+
+
+/*****************************************************
+ *  HERE YOU CAN START TO WRITE YOUR OWN DIVS
+ */
+
+
+
+
+
+
+
+/*
+ * Media queries for responsive design
+ */
+
+@media all and (orientation:portrait) { 
+  /* Style adjustments for portrait mode goes here */
+  
+}
+
+@media all and (orientation:landscape) { 
+  /* Style adjustments for landscape mode goes here */
+  
+}
+
+/* Grade-A Mobile Browsers (Opera Mobile, iPhone Safari, Android Chrome)  
+   Consider this: www.cloudfour.com/css-media-query-for-mobile-is-fools-gold/ */
+@media screen and (max-device-width: 480px) {
+  
+  
+  /* Uncomment if you don't want iOS and WinMobile to mobile-optimize the text for you
+     j.mp/textsizeadjust 
+  html { -webkit-text-size-adjust:none; -ms-text-size-adjust:none; } */
+}
+
+
+/* 
+ * print styles
+ * inlined to avoid required HTTP connection www.phpied.com/delay-loading-your-print-css/ 
+ */
+@media print {
+  * { background: transparent !important; color: #444 !important; text-shadow: none !important; }
+  a, a:visited { color: #444 !important; text-decoration: underline; }
+  a:after { content: " (" attr(href) ")"; } 
+  abbr:after { content: " (" attr(title) ")"; }
+  .ir a:after { content: ""; }  /* Don't show links for images */
+  pre, blockquote { border: 1px solid #999; page-break-inside: avoid; }
+  thead { display: table-header-group; } /* css-discuss.incutio.com/wiki/Printing_Tables */ 
+  tr, img { page-break-inside: avoid; }
+  @page { margin: 0.5cm; }
+  p, h2, h3 { orphans: 3; widows: 3; }
+  h2, h3{ page-break-after: avoid; }
+}
+

ADDED   applications/mobileblur/static/css/calendar.css
Index: applications/mobileblur/static/css/calendar.css
==================================================================
--- /dev/null
+++ applications/mobileblur/static/css/calendar.css
@@ -0,0 +1,1 @@
+.calendar{z-index:99;position:relative;display:none;border-top:2px solid #fff;border-right:2px solid #000;border-bottom:2px solid #000;border-left:2px solid #fff;font-size:11px;color:#000;cursor:default;background:#d4d0c8;font-family:tahoma,verdana,sans-serif;}.calendar table{border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;font-size:11px;color:#000;cursor:default;background:#d4d0c8;font-family:tahoma,verdana,sans-serif;}.calendar .button{text-align:center;padding:1px;border-top:1px solid #fff;border-right:1px solid #000;border-bottom:1px solid #000;border-left:1px solid #fff;}.calendar .nav{background:transparent}.calendar thead .title{font-weight:bold;padding:1px;border:1px solid #000;background:#848078;color:#fff;text-align:center;}.calendar thead .name{border-bottom:1px solid #000;padding:2px;text-align:center;background:#f4f0e8;}.calendar thead .weekend{color:#f00;}.calendar thead .hilite{border-top:2px solid #fff;border-right:2px solid #000;border-bottom:2px solid #000;border-left:2px solid #fff;padding:0;background-color:#e4e0d8;}.calendar thead .active{padding:2px 0 0 2px;border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;background-color:#c4c0b8;}.calendar tbody .day{width:2em;text-align:right;padding:2px 4px 2px 2px;}.calendar tbody .day.othermonth{font-size:80%;color:#aaa;}.calendar tbody .day.othermonth.oweekend{color:#faa;}.calendar table .wn{padding:2px 3px 2px 2px;border-right:1px solid #000;background:#f4f0e8;}.calendar tbody .rowhilite td{background:#e4e0d8;}.calendar tbody .rowhilite td.wn{background:#d4d0c8;}.calendar tbody td.hilite{padding:1px 3px 1px 1px;border-top:1px solid #fff;border-right:1px solid #000;border-bottom:1px solid #000;border-left:1px solid #fff;}.calendar tbody td.active{padding:2px 2px 0 2px;border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;}.calendar tbody td.selected{font-weight:bold;border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;padding:2px 2px 0 2px;background:#e4e0d8;}.calendar tbody td.weekend{color:#f00;}.calendar tbody td.today{font-weight:bold;color:#00f;}.calendar tbody .disabled{color:#999;}.calendar tbody .emptycell{visibility:hidden;}.calendar tbody .emptyrow{display:none;}.calendar tfoot .ttip{background:#f4f0e8;padding:1px;border:1px solid #000;background:#848078;color:#fff;text-align:center;}.calendar tfoot .hilite{border-top:1px solid #fff;border-right:1px solid #000;border-bottom:1px solid #000;border-left:1px solid #fff;padding:1px;background:#e4e0d8;}.calendar tfoot .active{padding:2px 0 0 2px;border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;}.calendar .combo{position:absolute;display:none;width:4em;top:0;left:0;cursor:default;border-top:1px solid #fff;border-right:1px solid #000;border-bottom:1px solid #000;border-left:1px solid #fff;background:#e4e0d8;font-size:90%;padding:1px;z-index:100;}.calendar .combo .label,.calendar .combo .label-IEfix{text-align:center;padding:1px;}.calendar .combo .label-IEfix{width:4em;}.calendar .combo .active{background:#c4c0b8;padding:0;border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;}.calendar .combo .hilite{background:#048;color:#fea;}.calendar td.time{border-top:1px solid #000;padding:1px 0;text-align:center;background-color:#f4f0e8;}.calendar td.time .hour,.calendar td.time .minute,.calendar td.time .ampm{padding:0 3px 0 4px;border:1px solid #889;font-weight:bold;background-color:#fff;}.calendar td.time .ampm{text-align:center;}.calendar td.time .colon{padding:0 2px 0 3px;font-weight:bold;}.calendar td.time span.hilite{border-color:#000;background-color:#766;color:#fff;}.calendar td.time span.active{border-color:#f00;background-color:#000;color:#0f0;}#CP_hourcont{z-index:99;padding:0;position:absolute;border:1px dashed #666;background-color:#eee;display:none;}#CP_minutecont{z-index:99;background-color:#ddd;padding:1px;position:absolute;width:45px;display:none;}.floatleft{float:left;}.CP_hour{z-index:99;padding:1px;font-family:Arial,Helvetica,sans-serif;font-size:9px;white-space:nowrap;cursor:pointer;width:35px;}.CP_minute{z-index:99;padding:1px;font-family:Arial,Helvetica,sans-serif;font-size:9px;white-space:nowrap;cursor:pointer;width:auto;}.CP_over{background-color:#fff;z-index:99}

ADDED   applications/mobileblur/static/css/handheld.css
Index: applications/mobileblur/static/css/handheld.css
==================================================================
--- /dev/null
+++ applications/mobileblur/static/css/handheld.css
@@ -0,0 +1,7 @@
+
+* {
+  float: none;       /* Screens are not big enough to account for floats */
+  font-size: 80%;    /* Slightly reducing font size to reduce need to scroll */ 
+  background: #fff;  /*  As much contrast as possible */
+  color: #000;
+}

ADDED   applications/mobileblur/static/css/superfish-navbar.css
Index: applications/mobileblur/static/css/superfish-navbar.css
==================================================================
--- /dev/null
+++ applications/mobileblur/static/css/superfish-navbar.css
@@ -0,0 +1,93 @@
+
+/*** adding the class sf-navbar in addition to sf-menu creates an all-horizontal nav-bar menu ***/
+.sf-navbar {
+	background:		#BDD2FF;
+	height:			2.5em;
+	padding-bottom:	2.5em;
+	position:		relative;
+}
+.sf-navbar li {
+	background:		#AABDE6;
+	position:		static;
+}
+.sf-navbar a {
+	border-top:		none;
+}
+.sf-navbar li ul {
+	width:			44em; /*IE6 soils itself without this*/
+}
+.sf-navbar li li {
+	background:		#BDD2FF;
+	position:		relative;
+}
+.sf-navbar li li ul {
+	width:			13em;
+}
+.sf-navbar li li li {
+	width:			100%;
+}
+.sf-navbar ul li {
+	width:			auto;
+	float:			left;
+}
+.sf-navbar a, .sf-navbar a:visited {
+	border:			none;
+}
+.sf-navbar li.current {
+	background:		#BDD2FF;
+}
+.sf-navbar li:hover,
+.sf-navbar li.sfHover,
+.sf-navbar li li.current,
+.sf-navbar a:focus, .sf-navbar a:hover, .sf-navbar a:active {
+	background:		#BDD2FF;
+}
+.sf-navbar ul li:hover,
+.sf-navbar ul li.sfHover,
+ul.sf-navbar ul li:hover li,
+ul.sf-navbar ul li.sfHover li,
+.sf-navbar ul a:focus, .sf-navbar ul a:hover, .sf-navbar ul a:active {
+	background:		#D1DFFF;
+}
+ul.sf-navbar li li li:hover,
+ul.sf-navbar li li li.sfHover,
+.sf-navbar li li.current li.current,
+.sf-navbar ul li li a:focus, .sf-navbar ul li li a:hover, .sf-navbar ul li li a:active {
+	background:		#E6EEFF;
+}
+ul.sf-navbar .current ul,
+ul.sf-navbar ul li:hover ul,
+ul.sf-navbar ul li.sfHover ul {
+	left:			0;
+	top:			2.5em; /* match top ul list item height */
+}
+ul.sf-navbar .current ul ul {
+	top: 			-999em;
+}
+
+.sf-navbar li li.current > a {
+	font-weight:	bold;
+}
+
+/*** point all arrows down ***/
+/* point right for anchors in subs */
+.sf-navbar ul .sf-sub-indicator { background-position: -10px -100px; }
+.sf-navbar ul a > .sf-sub-indicator { background-position: 0 -100px; }
+/* apply hovers to modern browsers */
+.sf-navbar ul a:focus > .sf-sub-indicator,
+.sf-navbar ul a:hover > .sf-sub-indicator,
+.sf-navbar ul a:active > .sf-sub-indicator,
+.sf-navbar ul li:hover > a > .sf-sub-indicator,
+.sf-navbar ul li.sfHover > a > .sf-sub-indicator {
+	background-position: -10px -100px; /* arrow hovers for modern browsers*/
+}
+
+/*** remove shadow on first submenu ***/
+.sf-navbar > li > ul {
+	background: transparent;
+	padding: 0;
+	-moz-border-radius-bottomleft: 0;
+	-moz-border-radius-topright: 0;
+	-webkit-border-top-right-radius: 0;
+	-webkit-border-bottom-left-radius: 0;
+}

ADDED   applications/mobileblur/static/css/superfish-vertical.css
Index: applications/mobileblur/static/css/superfish-vertical.css
==================================================================
--- /dev/null
+++ applications/mobileblur/static/css/superfish-vertical.css
@@ -0,0 +1,23 @@
+/*** adding sf-vertical in addition to sf-menu creates a vertical menu ***/
+.sf-vertical, .sf-vertical li {
+	width:	10em;
+}
+/* this lacks ul at the start of the selector, so the styles from the main CSS file override it where needed */
+.sf-vertical li:hover ul,
+.sf-vertical li.sfHover ul {
+	left:	10em; /* match ul width */
+	top:	0;
+}
+
+/*** alter arrow directions ***/
+.sf-vertical .sf-sub-indicator { background-position: -10px 0; } /* IE6 gets solid image only */
+.sf-vertical a > .sf-sub-indicator { background-position: 0 0; } /* use translucent arrow for modern browsers*/
+
+/* hover arrow direction for modern browsers*/
+.sf-vertical a:focus > .sf-sub-indicator,
+.sf-vertical a:hover > .sf-sub-indicator,
+.sf-vertical a:active > .sf-sub-indicator,
+.sf-vertical li:hover > a > .sf-sub-indicator,
+.sf-vertical li.sfHover > a > .sf-sub-indicator {
+	background-position: -10px 0; /* arrow hovers for modern browsers*/
+}

ADDED   applications/mobileblur/static/css/superfish.css
Index: applications/mobileblur/static/css/superfish.css
==================================================================
--- /dev/null
+++ applications/mobileblur/static/css/superfish.css
@@ -0,0 +1,139 @@
+
+/*** ESSENTIAL STYLES ***/
+.sf-menu, .sf-menu * {
+	margin:			0;
+	padding:		0;
+	list-style:		none;
+}
+.sf-menu {
+	line-height:	1.0;
+}
+.sf-menu ul {
+	position:		absolute;
+	top:			-999em;
+	width:			10em; /* left offset of submenus need to match (see below) */
+}
+.sf-menu ul li {
+	width:			100%;
+}
+.sf-menu li:hover {
+	visibility:		inherit; /* fixes IE7 'sticky bug' */
+}
+.sf-menu li {
+	float:			left;
+	position:		relative;
+}
+.sf-menu a {
+	display:		block;
+	position:		relative;
+}
+.sf-menu li:hover ul,
+.sf-menu li.sfHover ul {
+	left:			0;
+	top:			2.5em; /* match top ul list item height */
+	z-index:		99;
+}
+ul.sf-menu li:hover li ul,
+ul.sf-menu li.sfHover li ul {
+	top:			-999em;
+}
+ul.sf-menu li li:hover ul,
+ul.sf-menu li li.sfHover ul {
+	left:			10em; /* match ul width */
+	top:			0;
+}
+ul.sf-menu li li:hover li ul,
+ul.sf-menu li li.sfHover li ul {
+	top:			-999em;
+}
+ul.sf-menu li li li:hover ul,
+ul.sf-menu li li li.sfHover ul {
+	left:			10em; /* match ul width */
+	top:			0;
+}
+
+/*** DEMO SKIN ***/
+.sf-menu {
+	float:			left;
+	/*margin-bottom:	1em;*/
+}
+.sf-menu a {
+	border-left:	1px solid #fff;
+	/*border-top:		1px solid #CFDEFF;*/
+	padding: 		.75em 1em;
+	text-decoration:none;
+}
+.sf-menu a, .sf-menu a:visited  { /* visited pseudo selector so IE6 applies text colour*/
+	color: #275b90;/*#13a;*/
+}
+.sf-menu li {
+	background: #dadada;/*#BDD2FF;*/
+}
+.sf-menu li li {
+	background:		#AABDE6;
+}
+.sf-menu li li a {
+	/*color: #13a;*/
+}
+.sf-menu li li li {
+	background:		#9AAEDB;
+}
+.sf-menu li:hover, .sf-menu li.sfHover,
+.sf-menu a:focus, .sf-menu a:hover, .sf-menu a:active {
+	background:		#CFDEFF;
+	outline:		0;
+}
+
+/*** arrows **/
+.sf-menu a.sf-with-ul {
+	padding-right: 	2.25em;
+	min-width:		1px; /* trigger IE7 hasLayout so spans position accurately */
+}
+.sf-sub-indicator {
+	position:		absolute;
+	display:		block;
+	right:			.75em;
+	top:			1.05em; /* IE6 only */
+	width:			10px;
+	height:			10px;
+	text-indent: 	-999em;
+	overflow:		hidden;
+	background:		url('../images/arrows-ffffff.png') no-repeat -10px -100px; /* 8-bit indexed alpha png. IE6 gets solid image only */
+}
+a > .sf-sub-indicator {  /* give all except IE6 the correct values */
+	top:			.8em;
+	background-position: 0 -100px; /* use translucent arrow for modern browsers*/
+}
+/* apply hovers to modern browsers */
+a:focus > .sf-sub-indicator,
+a:hover > .sf-sub-indicator,
+a:active > .sf-sub-indicator,
+li:hover > a > .sf-sub-indicator,
+li.sfHover > a > .sf-sub-indicator {
+	background-position: -10px -100px; /* arrow hovers for modern browsers*/
+}
+
+/* point right for anchors in subs */
+.sf-menu ul .sf-sub-indicator { background-position:  -10px 0; }
+.sf-menu ul a > .sf-sub-indicator { background-position:  0 0; }
+/* apply hovers to modern browsers */
+.sf-menu ul a:focus > .sf-sub-indicator,
+.sf-menu ul a:hover > .sf-sub-indicator,
+.sf-menu ul a:active > .sf-sub-indicator,
+.sf-menu ul li:hover > a > .sf-sub-indicator,
+.sf-menu ul li.sfHover > a > .sf-sub-indicator {
+	background-position: -10px 0; /* arrow hovers for modern browsers*/
+}
+
+/*** shadows for all but IE6 ***/
+.sf-shadow ul {
+	background:	url('../images/shadow.png') no-repeat bottom right;
+	padding: 0 8px 9px 0;
+	-moz-border-radius-bottomleft: 17px;
+	-moz-border-radius-topright: 17px;
+	-webkit-border-top-right-radius: 17px;
+	-webkit-border-bottom-left-radius: 17px;
+}
+.sf-shadow ul.sf-shadow-off {
+	background: transparent;
+}

ADDED   applications/mobileblur/static/favicon.ico
Index: applications/mobileblur/static/favicon.ico
==================================================================
--- /dev/null
+++ applications/mobileblur/static/favicon.ico
cannot compute difference between binary files

ADDED   applications/mobileblur/static/images/arrows-ffffff.png
Index: applications/mobileblur/static/images/arrows-ffffff.png
==================================================================
--- /dev/null
+++ applications/mobileblur/static/images/arrows-ffffff.png
cannot compute difference between binary files

ADDED   applications/mobileblur/static/images/css3buttons_backgrounds.png
Index: applications/mobileblur/static/images/css3buttons_backgrounds.png
==================================================================
--- /dev/null
+++ applications/mobileblur/static/images/css3buttons_backgrounds.png
cannot compute difference between binary files

ADDED   applications/mobileblur/static/images/css3buttons_icons.png
Index: applications/mobileblur/static/images/css3buttons_icons.png
==================================================================
--- /dev/null
+++ applications/mobileblur/static/images/css3buttons_icons.png
cannot compute difference between binary files

ADDED   applications/mobileblur/static/images/error.png
Index: applications/mobileblur/static/images/error.png
==================================================================
--- /dev/null
+++ applications/mobileblur/static/images/error.png
cannot compute difference between binary files

ADDED   applications/mobileblur/static/images/ok.png
Index: applications/mobileblur/static/images/ok.png
==================================================================
--- /dev/null
+++ applications/mobileblur/static/images/ok.png
cannot compute difference between binary files

ADDED   applications/mobileblur/static/images/poweredby.png
Index: applications/mobileblur/static/images/poweredby.png
==================================================================
--- /dev/null
+++ applications/mobileblur/static/images/poweredby.png
cannot compute difference between binary files

ADDED   applications/mobileblur/static/images/shadow.png
Index: applications/mobileblur/static/images/shadow.png
==================================================================
--- /dev/null
+++ applications/mobileblur/static/images/shadow.png
cannot compute difference between binary files

ADDED   applications/mobileblur/static/images/warn.png
Index: applications/mobileblur/static/images/warn.png
==================================================================
--- /dev/null
+++ applications/mobileblur/static/images/warn.png
cannot compute difference between binary files

ADDED   applications/mobileblur/static/images/warning.png
Index: applications/mobileblur/static/images/warning.png
==================================================================
--- /dev/null
+++ applications/mobileblur/static/images/warning.png
cannot compute difference between binary files

ADDED   applications/mobileblur/static/js/calendar.js
Index: applications/mobileblur/static/js/calendar.js
==================================================================
--- /dev/null
+++ applications/mobileblur/static/js/calendar.js
cannot compute difference between binary files

ADDED   applications/mobileblur/static/js/dd_belatedpng.js
Index: applications/mobileblur/static/js/dd_belatedpng.js
==================================================================
--- /dev/null
+++ applications/mobileblur/static/js/dd_belatedpng.js
@@ -0,0 +1,13 @@
+/**
+* DD_belatedPNG: Adds IE6 support: PNG images for CSS background-image and HTML .
+* Author: Drew Diller
+* Email: drew.diller@gmail.com
+* URL: http://www.dillerdesign.com/experiment/DD_belatedPNG/
+* Version: 0.0.8a
+* Licensed under the MIT License: http://dillerdesign.com/experiment/DD_belatedPNG/#license
+*
+* Example usage:
+* DD_belatedPNG.fix('.png_bg'); // argument is a CSS selector
+* DD_belatedPNG.fixPng( someNode ); // argument is an HTMLDomElement
+**/
+var DD_belatedPNG={ns:"DD_belatedPNG",imgSize:{},delay:10,nodesFixed:0,createVmlNameSpace:function(){if(document.namespaces&&!document.namespaces[this.ns]){document.namespaces.add(this.ns,"urn:schemas-microsoft-com:vml")}},createVmlStyleSheet:function(){var b,a;b=document.createElement("style");b.setAttribute("media","screen");document.documentElement.firstChild.insertBefore(b,document.documentElement.firstChild.firstChild);if(b.styleSheet){b=b.styleSheet;b.addRule(this.ns+"\\:*","{behavior:url(#default#VML)}");b.addRule(this.ns+"\\:shape","position:absolute;");b.addRule("img."+this.ns+"_sizeFinder","behavior:none; border:none; position:absolute; z-index:-1; top:-10000px; visibility:hidden;");this.screenStyleSheet=b;a=document.createElement("style");a.setAttribute("media","print");document.documentElement.firstChild.insertBefore(a,document.documentElement.firstChild.firstChild);a=a.styleSheet;a.addRule(this.ns+"\\:*","{display: none !important;}");a.addRule("img."+this.ns+"_sizeFinder","{display: none !important;}")}},readPropertyChange:function(){var b,c,a;b=event.srcElement;if(!b.vmlInitiated){return}if(event.propertyName.search("background")!=-1||event.propertyName.search("border")!=-1){DD_belatedPNG.applyVML(b)}if(event.propertyName=="style.display"){c=(b.currentStyle.display=="none")?"none":"block";for(a in b.vml){if(b.vml.hasOwnProperty(a)){b.vml[a].shape.style.display=c}}}if(event.propertyName.search("filter")!=-1){DD_belatedPNG.vmlOpacity(b)}},vmlOpacity:function(b){if(b.currentStyle.filter.search("lpha")!=-1){var a=b.currentStyle.filter;a=parseInt(a.substring(a.lastIndexOf("=")+1,a.lastIndexOf(")")),10)/100;b.vml.color.shape.style.filter=b.currentStyle.filter;b.vml.image.fill.opacity=a}},handlePseudoHover:function(a){setTimeout(function(){DD_belatedPNG.applyVML(a)},1)},fix:function(a){if(this.screenStyleSheet){var c,b;c=a.split(",");for(b=0;bn.H){i.B=n.H}d.vml.image.shape.style.clip="rect("+i.T+"px "+(i.R+a)+"px "+i.B+"px "+(i.L+a)+"px)"}else{d.vml.image.shape.style.clip="rect("+f.T+"px "+f.R+"px "+f.B+"px "+f.L+"px)"}},figurePercentage:function(d,c,f,a){var b,e;e=true;b=(f=="X");switch(a){case"left":case"top":d[f]=0;break;case"center":d[f]=0.5;break;case"right":case"bottom":d[f]=1;break;default:if(a.search("%")!=-1){d[f]=parseInt(a,10)/100}else{e=false}}d[f]=Math.ceil(e?((c[b?"W":"H"]*d[f])-(c[b?"w":"h"]*d[f])):parseInt(a,10));if(d[f]%2===0){d[f]++}return d[f]},fixPng:function(c){c.style.behavior="none";var g,b,f,a,d;if(c.nodeName=="BODY"||c.nodeName=="TD"||c.nodeName=="TR"){return}c.isImg=false;if(c.nodeName=="IMG"){if(c.src.toLowerCase().search(/\.png$/)!=-1){c.isImg=true;c.style.visibility="hidden"}else{return}}else{if(c.currentStyle.backgroundImage.toLowerCase().search(".png")==-1){return}}g=DD_belatedPNG;c.vml={color:{},image:{}};b={shape:{},fill:{}};for(a in c.vml){if(c.vml.hasOwnProperty(a)){for(d in b){if(b.hasOwnProperty(d)){f=g.ns+":"+d;c.vml[a][d]=document.createElement(f)}}c.vml[a].shape.stroked=false;c.vml[a].shape.appendChild(c.vml[a].fill);c.parentNode.insertBefore(c.vml[a].shape,c)}}c.vml.image.shape.fillcolor="none";c.vml.image.fill.type="tile";c.vml.color.fill.on=false;g.attachHandlers(c);g.giveLayout(c);g.giveLayout(c.offsetParent);c.vmlInitiated=true;g.applyVML(c)}};try{document.execCommand("BackgroundImageCache",false,true)}catch(r){}DD_belatedPNG.createVmlNameSpace();DD_belatedPNG.createVmlStyleSheet();

ADDED   applications/mobileblur/static/js/jquery.js
Index: applications/mobileblur/static/js/jquery.js
==================================================================
--- /dev/null
+++ applications/mobileblur/static/js/jquery.js
cannot compute difference between binary files

ADDED   applications/mobileblur/static/js/modernizr-1.7.min.js
Index: applications/mobileblur/static/js/modernizr-1.7.min.js
==================================================================
--- /dev/null
+++ applications/mobileblur/static/js/modernizr-1.7.min.js
@@ -0,0 +1,2 @@
+// Modernizr v1.7  www.modernizr.com
+window.Modernizr=function(a,b,c){function G(){e.input=function(a){for(var b=0,c=a.length;b7)},r.history=function(){return !!(a.history&&history.pushState)},r.draganddrop=function(){return x("dragstart")&&x("drop")},r.websockets=function(){return"WebSocket"in a},r.rgba=function(){A("background-color:rgba(150,255,150,.5)");return D(k.backgroundColor,"rgba")},r.hsla=function(){A("background-color:hsla(120,40%,100%,.5)");return D(k.backgroundColor,"rgba")||D(k.backgroundColor,"hsla")},r.multiplebgs=function(){A("background:url(//:),url(//:),red url(//:)");return(new RegExp("(url\\s*\\(.*?){3}")).test(k.background)},r.backgroundsize=function(){return F("backgroundSize")},r.borderimage=function(){return F("borderImage")},r.borderradius=function(){return F("borderRadius","",function(a){return D(a,"orderRadius")})},r.boxshadow=function(){return F("boxShadow")},r.textshadow=function(){return b.createElement("div").style.textShadow===""},r.opacity=function(){B("opacity:.55");return/^0.55$/.test(k.opacity)},r.cssanimations=function(){return F("animationName")},r.csscolumns=function(){return F("columnCount")},r.cssgradients=function(){var a="background-image:",b="gradient(linear,left top,right bottom,from(#9f9),to(white));",c="linear-gradient(left top,#9f9, white);";A((a+o.join(b+a)+o.join(c+a)).slice(0,-a.length));return D(k.backgroundImage,"gradient")},r.cssreflections=function(){return F("boxReflect")},r.csstransforms=function(){return!!E(["transformProperty","WebkitTransform","MozTransform","OTransform","msTransform"])},r.csstransforms3d=function(){var a=!!E(["perspectiveProperty","WebkitPerspective","MozPerspective","OPerspective","msPerspective"]);a&&"webkitPerspective"in g.style&&(a=w("@media ("+o.join("transform-3d),(")+"modernizr)"));return a},r.csstransitions=function(){return F("transitionProperty")},r.fontface=function(){var a,c,d=h||g,e=b.createElement("style"),f=b.implementation||{hasFeature:function(){return!1}};e.type="text/css",d.insertBefore(e,d.firstChild),a=e.sheet||e.styleSheet;var i=f.hasFeature("CSS2","")?function(b){if(!a||!b)return!1;var c=!1;try{a.insertRule(b,0),c=/src/i.test(a.cssRules[0].cssText),a.deleteRule(a.cssRules.length-1)}catch(d){}return c}:function(b){if(!a||!b)return!1;a.cssText=b;return a.cssText.length!==0&&/src/i.test(a.cssText)&&a.cssText.replace(/\r+|\n+/g,"").indexOf(b.split(" ")[0])===0};c=i('@font-face { font-family: "font"; src: url(data:,); }'),d.removeChild(e);return c},r.video=function(){var a=b.createElement("video"),c=!!a.canPlayType;if(c){c=new Boolean(c),c.ogg=a.canPlayType('video/ogg; codecs="theora"');var d='video/mp4; codecs="avc1.42E01E';c.h264=a.canPlayType(d+'"')||a.canPlayType(d+', mp4a.40.2"'),c.webm=a.canPlayType('video/webm; codecs="vp8, vorbis"')}return c},r.audio=function(){var a=b.createElement("audio"),c=!!a.canPlayType;c&&(c=new Boolean(c),c.ogg=a.canPlayType('audio/ogg; codecs="vorbis"'),c.mp3=a.canPlayType("audio/mpeg;"),c.wav=a.canPlayType('audio/wav; codecs="1"'),c.m4a=a.canPlayType("audio/x-m4a;")||a.canPlayType("audio/aac;"));return c},r.localstorage=function(){try{return!!localStorage.getItem}catch(a){return!1}},r.sessionstorage=function(){try{return!!sessionStorage.getItem}catch(a){return!1}},r.webWorkers=function(){return!!a.Worker},r.applicationcache=function(){return!!a.applicationCache},r.svg=function(){return!!b.createElementNS&&!!b.createElementNS(q.svg,"svg").createSVGRect},r.inlinesvg=function(){var a=b.createElement("div");a.innerHTML="";return(a.firstChild&&a.firstChild.namespaceURI)==q.svg},r.smil=function(){return!!b.createElementNS&&/SVG/.test(n.call(b.createElementNS(q.svg,"animate")))},r.svgclippaths=function(){return!!b.createElementNS&&/SVG/.test(n.call(b.createElementNS(q.svg,"clipPath")))};for(var H in r)z(r,H)&&(v=H.toLowerCase(),e[v]=r[H](),u.push((e[v]?"":"no-")+v));e.input||G(),e.crosswindowmessaging=e.postmessage,e.historymanagement=e.history,e.addTest=function(a,b){a=a.toLowerCase();if(!e[a]){b=!!b(),g.className+=" "+(b?"":"no-")+a,e[a]=b;return e}},A(""),j=l=null,f&&a.attachEvent&&function(){var a=b.createElement("div");a.innerHTML="";return a.childNodes.length!==1}()&&function(a,b){function p(a,b){var c=-1,d=a.length,e,f=[];while(++c »'].join('')),
+			over = function(){
+				var $$ = $(this), menu = getMenu($$);
+				clearTimeout(menu.sfTimer);
+				$$.showSuperfishUl().siblings().hideSuperfishUl();
+			},
+			out = function(){
+				var $$ = $(this), menu = getMenu($$), o = sf.op;
+				clearTimeout(menu.sfTimer);
+				menu.sfTimer=setTimeout(function(){
+					o.retainPath=($.inArray($$[0],o.$path)>-1);
+					$$.hideSuperfishUl();
+					if (o.$path.length && $$.parents(['li.',o.hoverClass].join('')).length<1){over.call(o.$path);}
+				},o.delay);	
+			},
+			getMenu = function($menu){
+				var menu = $menu.parents(['ul.',c.menuClass,':first'].join(''))[0];
+				sf.op = sf.o[menu.serial];
+				return menu;
+			},
+			addArrow = function($a){ $a.addClass(c.anchorClass).append($arrow.clone()); };
+			
+		return this.each(function() {
+			var s = this.serial = sf.o.length;
+			var o = $.extend({},sf.defaults,op);
+			o.$path = $('li.'+o.pathClass,this).slice(0,o.pathLevels).each(function(){
+				$(this).addClass([o.hoverClass,c.bcClass].join(' '))
+					.filter('li:has(ul)').removeClass(o.pathClass);
+			});
+			sf.o[s] = sf.op = o;
+			
+			$('li:has(ul)',this)[($.fn.hoverIntent && !o.disableHI) ? 'hoverIntent' : 'hover'](over,out).each(function() {
+				if (o.autoArrows) addArrow( $('>a:first-child',this) );
+			})
+			.not('.'+c.bcClass)
+				.hideSuperfishUl();
+			
+			var $a = $('a',this);
+			$a.each(function(i){
+				var $li = $a.eq(i).parents('li');
+				$a.eq(i).focus(function(){over.call($li);}).blur(function(){out.call($li);});
+			});
+			o.onInit.call(this);
+			
+		}).each(function() {
+			var menuClasses = [c.menuClass];
+			if (sf.op.dropShadows  && !($.browser.msie && $.browser.version < 7)) menuClasses.push(c.shadowClass);
+			$(this).addClass(menuClasses.join(' '));
+		});
+	};
+
+	var sf = $.fn.superfish;
+	sf.o = [];
+	sf.op = {};
+	sf.IE7fix = function(){
+		var o = sf.op;
+		if ($.browser.msie && $.browser.version > 6 && o.dropShadows && o.animation.opacity!=undefined)
+			this.toggleClass(sf.c.shadowClass+'-off');
+		};
+	sf.c = {
+		bcClass     : 'sf-breadcrumb',
+		menuClass   : 'sf-js-enabled',
+		anchorClass : 'sf-with-ul',
+		arrowClass  : 'sf-sub-indicator',
+		shadowClass : 'sf-shadow'
+	};
+	sf.defaults = {
+		hoverClass	: 'sfHover',
+		pathClass	: 'overideThisToUse',
+		pathLevels	: 1,
+		delay		: 800,
+		animation	: {opacity:'show'},
+		speed		: 'normal',
+		autoArrows	: true,
+		dropShadows : true,
+		disableHI	: false,		// true disables hoverIntent detection
+		onInit		: function(){}, // callback functions
+		onBeforeShow: function(){},
+		onShow		: function(){},
+		onHide		: function(){}
+	};
+	$.fn.extend({
+		hideSuperfishUl : function(){
+			var o = sf.op,
+				not = (o.retainPath===true) ? o.$path : '';
+			o.retainPath = false;
+			var $ul = $(['li.',o.hoverClass].join(''),this).add(this).not(not).removeClass(o.hoverClass)
+					.find('>ul').hide().css('visibility','hidden');
+			o.onHide.call($ul);
+			return this;
+		},
+		showSuperfishUl : function(){
+			var o = sf.op,
+				sh = sf.c.shadowClass+'-off',
+				$ul = this.addClass(o.hoverClass)
+					.find('>ul:hidden').css('visibility','visible');
+			sf.IE7fix.call($ul);
+			o.onBeforeShow.call($ul);
+			$ul.animate(o.animation,o.speed,function(){ sf.IE7fix.call($ul); o.onShow.call($ul); });
+			return this;
+		}
+	});
+
+})(jQuery);

ADDED   applications/mobileblur/static/js/web2py_ajax.js
Index: applications/mobileblur/static/js/web2py_ajax.js
==================================================================
--- /dev/null
+++ applications/mobileblur/static/js/web2py_ajax.js
@@ -0,0 +1,97 @@
+function popup(url) {
+  newwindow=window.open(url,'name','height=400,width=600');
+  if (window.focus) newwindow.focus();
+  return false;
+}
+function collapse(id) { jQuery('#'+id).slideToggle(); }
+function fade(id,value) { if(value>0) jQuery('#'+id).hide().fadeIn('slow'); else jQuery('#'+id).show().fadeOut('slow'); }
+function ajax(u,s,t) {
+    query = '';
+    if (typeof s == "string") {
+        d = jQuery(s).serialize();
+        if(d){ query = d; }
+    } else {
+        pcs = [];
+        for(i=0; i0){query = pcs.join("&");}
+    }
+    jQuery.ajax({type: "POST", url: u, data: query, success: function(msg) { if(t) { if(t==':eval') eval(msg); else jQuery("#" + t).html(msg); } } }); 
+}
+
+String.prototype.reverse = function () { return this.split('').reverse().join('');};
+function web2py_ajax_init() {
+  jQuery('.hidden').hide();
+  jQuery('.error').hide().slideDown('slow');
+  jQuery('.flash').click(function() { jQuery(this).fadeOut('slow'); return false; });
+  // jQuery('input[type=submit]').click(function(){var t=jQuery(this);t.hide();t.after('')});
+  jQuery('input.integer').live('keyup', function(){this.value=this.value.reverse().replace(/[^0-9\-]|\-(?=.)/g,'').reverse();});
+  jQuery('input.double,input.decimal').live('keyup', function(){this.value=this.value.reverse().replace(/[^0-9\-\.,]|[\-](?=.)|[\.,](?=[0-9]*[\.,])/g,'').reverse();});
+  var confirm_message = (typeof w2p_ajax_confirm_message != 'undefined') ? w2p_ajax_confirm_message : "Are you sure you want to delete this object?";
+  jQuery("input[type='checkbox'].delete").live('click', function(){ if(this.checked) if(!confirm(confirm_message)) this.checked=false; });
+  var date_format = (typeof w2p_ajax_date_format != 'undefined') ? w2p_ajax_date_format : "%Y-%m-%d";
+  try {jQuery("input.date").live('focus',function() {Calendar.setup({
+     inputField:this, ifFormat:date_format, showsTime:false
+  }); }); } catch(e) {};
+  var datetime_format = (typeof w2p_ajax_datetime_format != 'undefined') ? w2p_ajax_datetime_format : "%Y-%m-%d %H:%M:%S";
+  try { jQuery("input.datetime").live('focus', function() {Calendar.setup({
+     inputField:this, ifFormat:datetime_format, showsTime: true,timeFormat: "24"
+  }); }); } catch(e) {};
+
+  jQuery("input.time").live('focus', function() { var el = jQuery(this); 
+          if (!el.hasClass('hasTimeEntry')) try { el.timeEntry(); } catch(e) {}; 
+  });
+};
+
+jQuery(function() {   
+   var flash = jQuery('.flash');
+   flash.hide();
+   if(flash.html()) flash.slideDown();
+   web2py_ajax_init();
+});
+function web2py_trap_form(action,target) {
+   jQuery('#'+target+' form').each(function(i){
+      var form=jQuery(this);
+      if(!form.hasClass('no_trap'))
+        form.submit(function(obj){
+         jQuery('.flash').hide().html('');
+         web2py_ajax_page('post',action,form.serialize(),target);
+         return false;
+      });
+   });
+}
+function web2py_ajax_page(method,action,data,target) {
+  jQuery.ajax({'type':method,'url':action,'data':data,
+    'beforeSend':function(xhr) {
+      xhr.setRequestHeader('web2py-component-location',document.location);
+      xhr.setRequestHeader('web2py-component-element',target);},
+    'complete':function(xhr,text){
+      var html=xhr.responseText;
+      var content=xhr.getResponseHeader('web2py-component-content'); 
+      var command=xhr.getResponseHeader('web2py-component-command');
+      var flash=xhr.getResponseHeader('web2py-component-flash');
+      var t = jQuery('#'+target);
+      if(content=='prepend') t.prepend(html); 
+      else if(content=='append') t.append(html);
+      else if(content!='hide') t.html(html);  
+      web2py_trap_form(action,target);
+      web2py_ajax_init();      
+      if(command) eval(command);
+      if(flash) jQuery('.flash').html(flash).slideDown();
+      }
+    });
+}
+function web2py_component(action,target) {
+  jQuery(function(){ web2py_ajax_page('get',action,null,target); });
+}
+function web2py_comet(url,onmessage,onopen,onclose) {
+  if ("WebSocket" in window) {
+    var ws = new WebSocket(url);
+    ws.onopen = onopen?onopen:(function(){});
+    ws.onmessage = onmessage;
+    ws.onclose = onclose?onclose:(function(){});
+    return true; // supported
+  } else return false; // not supported
+}

ADDED   applications/mobileblur/static/robots.txt
Index: applications/mobileblur/static/robots.txt
==================================================================
--- /dev/null
+++ applications/mobileblur/static/robots.txt
@@ -0,0 +1,2 @@
+User-agent: *
+Disallow: /welcome/default/user

ADDED   applications/mobileblur/views/__init__.py
Index: applications/mobileblur/views/__init__.py
==================================================================
--- /dev/null
+++ applications/mobileblur/views/__init__.py

ADDED   applications/mobileblur/views/appadmin.html
Index: applications/mobileblur/views/appadmin.html
==================================================================
--- /dev/null
+++ applications/mobileblur/views/appadmin.html
@@ -0,0 +1,198 @@
+{{extend 'layout.html'}}
+
+
+{{if request.function=='index':}}
+  
    {{=T("Available databases and tables")}}
    
+  {{if not databases:}}{{=T("No databases in this application")}}{{pass}}
+  {{for db in sorted(databases):}}
+    {{for table in databases[db].tables:}}
+      {{qry='%s.%s.id>0'%(db,table)}}
+      {{tbl=databases[db][table]}}
+      {{if hasattr(tbl,'_primarykey'):}}
+        {{if tbl._primarykey:}}
+            {{firstkey=tbl[tbl._primarykey[0]]}}
+            {{if firstkey.type in ['string','text']:}}
+              {{qry='%s.%s.%s!=""'%(db,table,firstkey.name)}}
+            {{else:}}
+              {{qry='%s.%s.%s>0'%(db,table,firstkey.name)}}
+            {{pass}}
+        {{else:}}
+             {{qry=''}}
+             {{pass}}
+      {{pass}}
+      
    {{=A("%s.%s" % (db,table),_href=URL('select',args=[db],vars=dict(query=qry)))}}
+
    
+      [ {{=A(str(T('insert new'))+' '+table,_href=URL('insert',args=[db,table]))}} ]
+    

    
+    {{pass}}
+  {{pass}}
+
+{{elif request.function=='select':}}
+  
    {{=XML(str(T("database %s select"))%A(request.args[0],_href=URL('index'))) }}
+  
    
+   {{if table:}}
+  [ {{=A(str(T('insert new %s'))%table,_href=URL('insert',args=[request.args[0],table]))}} ]

    
+    
    {{=T("Rows in table")}}

    
+   {{else:}}
+    
    {{=T("Rows selected")}}

    
+   {{pass}}
+   {{=form}}
+   
    {{=T('The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.')}}
    
+      {{=T('Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.')}}
    
+      {{=T('"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN')}}
    
+    

    
+    
    {{=nrows}} {{=T("selected")}}
    
+    {{if start>0:}}[ {{=A(T('previous 100 rows'),_href=URL('select',args=request.args[0],vars=dict(start=start-100)))}} ]{{pass}}
+    {{if stop
+       {{linkto=URL('update',args=request.args[0])}}
+       {{upload=URL('download',args=request.args[0])}}    
+       {{=SQLTABLE(rows,linkto,upload,orderby=True,_class='sortable')}}
+       
+    {{pass}}
+    

    {{=T("Import/Export")}}

    
+    [ {{=T("export as csv file")}} ]
+  {{if table:}}
+    {{=FORM(str(T('or import from csv file'))+" ",INPUT(_type='file',_name='csvfile'),INPUT(_type='hidden',_value=table,_name='table'),INPUT(_type='submit',_value='import'))}}
+  {{pass}}
+
+
+{{elif request.function=='insert':}}  
+  
    {{=T("database")}} {{=A(request.args[0],_href=URL('index'))}}
+    {{if hasattr(table,'_primarykey'):}}
+      {{fieldname=table._primarykey[0]}}
+      {{dbname=request.args[0]}}
+      {{tablename=request.args[1]}}
+      {{cond = table[fieldname].type in ['string','text'] and '!=""' or '>0'}}
+      {{=T("table")}} {{=A(tablename,_href=URL('select',args=dbname,vars=dict(query='%s.%s.%s%s'%(dbname,tablename,fieldname,cond))))}}
+    {{else:}}  
+      {{=T("table")}} {{=A(request.args[1],_href=URL('select',args=request.args[0],vars=dict(query='%s.%s.id>0'%tuple(request.args[:2]))))}}
+    {{pass}}
+  
    
+  
    {{=T("New Record")}}

    
+  {{=form}}
+
+
+
+{{elif request.function=='update':}}
+  
    {{=T("database")}} {{=A(request.args[0],_href=URL('index'))}}
+    {{if hasattr(table,'_primarykey'):}}
+      {{fieldname=request.vars.keys()[0]}}
+      {{dbname=request.args[0]}}
+      {{tablename=request.args[1]}}
+      {{cond = table[fieldname].type in ['string','text'] and '!=""' or '>0'}}      
+      {{=T("table")}} {{=A(tablename,_href=URL('select',args=dbname,vars=dict(query='%s.%s.%s%s'%(dbname,tablename,fieldname,cond))))}}
+      {{=T("record")}} {{=A('%s=%s'%request.vars.items()[0],_href=URL('update',args=request.args[:2],vars=request.vars))}}
+    {{else:}}
+      {{=T("table")}} {{=A(request.args[1],_href=URL('select',args=request.args[0],vars=dict(query='%s.%s.id>0'%tuple(request.args[:2]))))}}
+      {{=T("record id")}} {{=A(request.args[2],_href=URL('update',args=request.args[:3]))}}
+    {{pass}}
+  
    
+  
    {{=T("Edit current record")}}


    {{=form}}
+
+
+
+{{elif request.function=='state':}}
+  
    {{=T("Internal State")}}
    
+  
    {{=T("Current request")}}
    
+  {{=BEAUTIFY(request)}}
+  
    {{=T("Current response")}}
    
+  {{=BEAUTIFY(response)}}
+  
    {{=T("Current session")}}
    
+  {{=BEAUTIFY(session)}}
+
+
+{{elif request.function == 'ccache':}}
+
    Cache
    
+
    
+
    
+    
    
+        Statistics
+    
    
+    
    
+        
    Overview
    
+        
    
+            Hit Ratio: 
+            {{=total['ratio']}}% 
+            ({{=total['hits']}} hits 
+            and {{=total['misses']}} misses)
+        
    
+        
    
+            Size of cache: 
+            {{=total['objects']}} items, 
+            {{=total['bytes']}} bytes 
+            {{if total['bytes'] > 524287:}}
+                ({{="%.0d" % (total['bytes'] / 1048576)}} MB)
+            {{pass}}
+        
    
+        
    
+            Cache contains items up to 
+            {{="%02d" % total['oldest'][0]}} hours 
+            {{="%02d" % total['oldest'][1]}} minutes 
+            {{="%02d" % total['oldest'][2]}} seconds old.
+        
    
+        
    RAM
    
+        
    
+            Hit Ratio: 
+            {{=ram['ratio']}}% 
+            ({{=ram['hits']}} hits 
+            and {{=ram['misses']}} misses)
+        
    
+        
    
+            Size of cache: 
+            {{=ram['objects']}} items, 
+            {{=ram['bytes']}} bytes 
+            {{if ram['bytes'] > 524287:}}
+                ({{=ram['bytes'] / 1048576}} MB)
+            {{pass}}
+        
    
+        
    
+            RAM contains items up to 
+            {{="%02d" % ram['oldest'][0]}} hours 
+            {{="%02d" % ram['oldest'][1]}} minutes 
+            {{="%02d" % ram['oldest'][2]}} seconds old.
+        
    
+        
    DISK
    
+        
    
+            Hit Ratio: 
+            {{=disk['ratio']}}% 
+            ({{=disk['hits']}} hits 
+            and {{=disk['misses']}} misses)
+        
    
+        
    
+            Size of cache: 
+            {{=disk['objects']}} items, 
+            {{=disk['bytes']}} bytes 
+            {{if disk['bytes'] > 524287:}}
+                ({{=disk['bytes'] / 1048576}} MB)
+            {{pass}}
+        
    
+        
    
+            DISK contains items up to 
+            {{="%02d" % disk['oldest'][0]}} hours 
+            {{="%02d" % disk['oldest'][1]}} minutes 
+            {{="%02d" % disk['oldest'][2]}} seconds old.
+        
    
+    
    
+    
+    
    
+    Manage Cache
+    
    
+    
    
+    
    
+        {{=form}}
+    
    
+    
    
+
    
+
    
+
    
+{{pass}}

ADDED   applications/mobileblur/views/default/index.html
Index: applications/mobileblur/views/default/index.html
==================================================================
--- /dev/null
+++ applications/mobileblur/views/default/index.html
@@ -0,0 +1,12 @@
+{{left_sidebar_enabled=right_sidebar_enabled=False}}
+{{extend 'layout.html'}}
+
+{{ for feed in feeds.itervalues(): }}
+    {{ if threshold == -1 and feed["ng"] > 0: }} [ {{= feed["ng"] }} ] {{ pass }}
+    {{ if threshold <= 0 and feed["nt"] > 0: }} [ {{= feed["nt"] }} ] {{ pass }}
+    {{if feed["ps"] > 0: }}[ {{= feed["ps"] }} ] {{ pass }}
+    {{= feed["feed_title"] }}
    
+{{ pass }}
+
+{{block left_sidebar}}New Left Sidebar Content{{end}}
+{{block right_sidebar}}New Right Sidebar Content{{end}}

ADDED   applications/mobileblur/views/default/user.html
Index: applications/mobileblur/views/default/user.html
==================================================================
--- /dev/null
+++ applications/mobileblur/views/default/user.html
@@ -0,0 +1,19 @@
+{{extend 'layout.html'}}
+
    {{=T( request.args(0).replace('_',' ').capitalize() )}}
    
+
    
+{{=form}}
+{{if request.args(0)=='login':}}
+{{if not 'register' in auth.settings.actions_disabled:}}
+
    register
+{{pass}}
+{{if not 'request_reset_password' in auth.settings.actions_disabled:}}
+
    lost password
+{{pass}}
+{{pass}}
+
    
+
+ 

ADDED   applications/mobileblur/views/feeds/view.html
Index: applications/mobileblur/views/feeds/view.html
==================================================================
--- /dev/null
+++ applications/mobileblur/views/feeds/view.html
@@ -0,0 +1,11 @@
+{{left_sidebar_enabled=right_sidebar_enabled=False}}
+{{extend 'layout.html'}}
+
+
    Title: {{= feed["feed_title"] }}
    
+
+{{ for story in stories: }}
+    
    {{= story["story_title"] }}
    
+{{ pass }}
+
+{{block left_sidebar}}New Left Sidebar Content{{end}}
+{{block right_sidebar}}New Right Sidebar Content{{end}}

ADDED   applications/mobileblur/views/generic.html
Index: applications/mobileblur/views/generic.html
==================================================================
--- /dev/null
+++ applications/mobileblur/views/generic.html
@@ -0,0 +1,16 @@
+{{extend 'layout.html'}}
+{{"""
+
+You should not modify this file. 
+It is used as default when a view is not provided for your controllers
+
+"""}}
+
    {{=' '.join(x.capitalize() for x in request.function.split('_'))}}
    
+{{if len(response._vars)==1:}}
+{{=response._vars.values()[0]}}
+{{elif len(response._vars)>1:}}
+{{=BEAUTIFY(response._vars)}}
+{{pass}}
+{{if request.is_local:}}
+{{=response.toolbar()}}
+{{pass}}

ADDED   applications/mobileblur/views/generic.json
Index: applications/mobileblur/views/generic.json
==================================================================
--- /dev/null
+++ applications/mobileblur/views/generic.json
@@ -0,0 +1,1 @@
+{{from gluon.serializers import json}}{{=XML(json(response._vars))}}

ADDED   applications/mobileblur/views/generic.load
Index: applications/mobileblur/views/generic.load
==================================================================
--- /dev/null
+++ applications/mobileblur/views/generic.load
@@ -0,0 +1,30 @@
+{{'''
+# License: Public Domain
+# Author: Iceberg at 21cn dot com
+
+With this generic.load file, you can use same function to serve two purposes.
+
+= regular action
+- ajax callback (when called with .load)
+
+Example modified from http://www.web2py.com/AlterEgo/default/show/252:
+
+def index():
+    return dict(
+		part1='hello world',
+        	part2=LOAD(url=URL(r=request,f='auxiliary.load'),ajax=True))
+
+def auxiliary():
+    form=SQLFORM.factory(Field('name'))
+    if form.accepts(request.vars):
+        response.flash = 'ok' 
+        return dict(message="Hello %s" % form.vars.name)
+    return dict(form=form)
+
+Notice:
+
+- no need to set response.headers['web2py-response-flash']
+- no need to return a string
+even if the function is called via ajax.
+
+'''}}{{if len(response._vars)==1:}}{{=response._vars.values()[0]}}{{else:}}{{=BEAUTIFY(response._vars)}}{{pass}}

ADDED   applications/mobileblur/views/generic.pdf
Index: applications/mobileblur/views/generic.pdf
==================================================================
--- /dev/null
+++ applications/mobileblur/views/generic.pdf
@@ -0,0 +1,11 @@
+{{
+import os
+from gluon.contrib.generics import pdf_from_html
+filename = '%s/%s.html' % (request.controller,request.function)
+if os.path.exists(os.path.join(request.folder,'views',filename)):
+   html=response.render(filename)
+else:
+   html=BODY(BEAUTIFY(response._vars)).xml()
+pass
+=pdf_from_html(html)
+}}

ADDED   applications/mobileblur/views/generic.rss
Index: applications/mobileblur/views/generic.rss
==================================================================
--- /dev/null
+++ applications/mobileblur/views/generic.rss
@@ -0,0 +1,10 @@
+{{
+###
+# response._vars contains the dictionary returned by the controller action
+# for this to work the action must return something like
+#
+#   dict(title=...,link=...,description=...,created_on='...',items=...)
+#
+# items is a list of dictionaries each with title, link, description, pub_date.
+###
+from gluon.serializers import rss}}{{=XML(rss(response._vars))}}

ADDED   applications/mobileblur/views/generic.xml
Index: applications/mobileblur/views/generic.xml
==================================================================
--- /dev/null
+++ applications/mobileblur/views/generic.xml
@@ -0,0 +1,1 @@
+{{from gluon.serializers import xml}}{{=XML(xml(response._vars))}}

ADDED   applications/mobileblur/views/layout.html
Index: applications/mobileblur/views/layout.html
==================================================================
--- /dev/null
+++ applications/mobileblur/views/layout.html
@@ -0,0 +1,159 @@
+
+
+  
+    
+    	  	
+    
+        
+    
+    
+    
+    {{=response.title or request.application}}
+    
+    
+    	
+    
+    
+    
+    
+    
+    
+    
+    
+    
+    
+
+    
+    
+    
+    
+    
+    
+    {{#------  require CSS and JS files for this page (read info in base.css) ------}}
+    {{response.files.append(URL('static','css/base.css'))}}
+    {{response.files.append(URL('static','css/superfish.css'))}}
+    {{response.files.append(URL('static','js/superfish.js'))}}
+    {{#------ include web2py specific js code (jquery, calendar, form stuff) ------}}
+    {{include 'web2py_ajax.html'}}
+
+    {{
+    #using sidebars need to know what sidebar you want to use
+    #prior of using it, because of static width size of content, you can use
+    #left_sidebar, right_sidebar, both or none (False left and right)    
+    left_sidebar_enabled = globals().get('left_sidebar_enabled',False)
+    right_sidebar_enabled = globals().get('right_sidebar_enabled',False)
+    if left_sidebar_enabled and right_sidebar_enabled: width_content='63%'
+    elif left_sidebar_enabled != right_sidebar_enabled: width_content='740px'
+    else: width_content='100%'
+    if left_sidebar_enabled: left_sidebar_style = 'style="display: block;"'
+    else: left_sidebar_style = 'style="display: none;"'
+    if right_sidebar_enabled: right_sidebar_style = 'style="display: block;"'
+    else: right_sidebar_style = 'style="display: none;"'
+    style_content = 'style="width: %s"' % width_content
+    }}
+  
+  
+  	
+  
+  
+  
+  
+    
+    
+    
    {{=response.flash or ''}}
     
+    
+    
    	      		      	
+      
+      
    		
+	
+	
+	
+	
    
+	  {{block statusbar}} 
+	  {{#------ superfish menu ------}}
+	  {{=MENU(response.menu,_class='sf-menu')}}
+	  
+	  
    	
+	  {{end}}				
+	
    
+	
+	
     	  
+
+	  {{if left_sidebar_enabled:}}
+          
+	  {{pass}}
+
+	  
+	  
    
+	    {{include}}	
+	  
    
+	  
+
+	  {{if right_sidebar_enabled:}}
+          
+          {{pass}}
+
+
+	  
    
+	  
+	
    							
+	
+				
+      
    
+    
    		
+    
+    
+    
+    
+        
+  
+

ADDED   applications/mobileblur/views/stories/view.html
Index: applications/mobileblur/views/stories/view.html
==================================================================
--- /dev/null
+++ applications/mobileblur/views/stories/view.html
@@ -0,0 +1,9 @@
+{{left_sidebar_enabled=right_sidebar_enabled=False}}
+{{extend 'layout.html'}}
+
+
    {{= story["story_title"] }}
    
+
+{{= XML(story["story_content"]) }}
+
+{{block left_sidebar}}New Left Sidebar Content{{end}}
+{{block right_sidebar}}New Right Sidebar Content{{end}}

ADDED   applications/mobileblur/views/web2py_ajax.html
Index: applications/mobileblur/views/web2py_ajax.html
==================================================================
--- /dev/null
+++ applications/mobileblur/views/web2py_ajax.html
@@ -0,0 +1,25 @@
+{{
+response.files.insert(0,URL('static','js/jquery.js'))
+response.files.insert(1,URL('static','css/calendar.css'))
+response.files.insert(2,URL('static','js/calendar.js'))
+for _item in response.meta or []:}}
+     {{
+pass
+for _k,_file in enumerate(response.files or []):
+  if _file in response.files[:_k]:
+     continue
+  _file0=_file.lower().split('?')[0]
+  if _file0.endswith('.css'):}}
+     {{
+  elif _file0.endswith('.js'):}}
+     {{
+  pass
+pass
+}}
+    
+    

ADDED   applications/welcome/ABOUT
Index: applications/welcome/ABOUT
==================================================================
--- /dev/null
+++ applications/welcome/ABOUT
@@ -0,0 +1,2 @@
+Write something about this app.
+Developed with web2py.

ADDED   applications/welcome/LICENSE
Index: applications/welcome/LICENSE
==================================================================
--- /dev/null
+++ applications/welcome/LICENSE
@@ -0,0 +1,4 @@
+The web2py welcome app is licensed under public domain 
+(except for the css and js files that it includes, which have their own third party licenses).
+
+You can modify this license when you add your own code.

ADDED   applications/welcome/__init__.py
Index: applications/welcome/__init__.py
==================================================================
--- /dev/null
+++ applications/welcome/__init__.py

ADDED   applications/welcome/controllers/appadmin.py
Index: applications/welcome/controllers/appadmin.py
==================================================================
--- /dev/null
+++ applications/welcome/controllers/appadmin.py
@@ -0,0 +1,408 @@
+# -*- coding: utf-8 -*-
+
+# ##########################################################
+# ## make sure administrator is on localhost
+# ###########################################################
+
+import os
+import socket
+import datetime
+import copy
+import gluon.contenttype
+import gluon.fileutils
+
+# ## critical --- make a copy of the environment
+
+global_env = copy.copy(globals())
+global_env['datetime'] = datetime
+
+http_host = request.env.http_host.split(':')[0]
+remote_addr = request.env.remote_addr
+try:
+    hosts = (http_host, socket.gethostname(),
+             socket.gethostbyname(http_host),
+             '::1','127.0.0.1','::ffff:127.0.0.1')
+except:
+    hosts = (http_host, )
+
+if request.env.http_x_forwarded_for or request.env.wsgi_url_scheme\
+     in ['https', 'HTTPS']:
+    session.secure()
+elif (remote_addr not in hosts) and (remote_addr != "127.0.0.1"):
+    raise HTTP(200, T('appadmin is disabled because insecure channel'))
+
+if (request.application=='admin' and not session.authorized) or \
+        (request.application!='admin' and not gluon.fileutils.check_credentials(request)):
+    redirect(URL('admin', 'default', 'index'))
+
+ignore_rw = True
+response.view = 'appadmin.html'
+response.menu = [[T('design'), False, URL('admin', 'default', 'design',
+                 args=[request.application])], [T('db'), False,
+                 URL('index')], [T('state'), False,
+                 URL('state')], [T('cache'), False,
+                 URL('ccache')]]
+
+# ##########################################################
+# ## auxiliary functions
+# ###########################################################
+
+
+def get_databases(request):
+    dbs = {}
+    for (key, value) in global_env.items():
+        cond = False
+        try:
+            cond = isinstance(value, GQLDB)
+        except:
+            cond = isinstance(value, SQLDB)
+        if cond:
+            dbs[key] = value
+    return dbs
+
+
+databases = get_databases(None)
+
+
+def eval_in_global_env(text):
+    exec ('_ret=%s' % text, {}, global_env)
+    return global_env['_ret']
+
+
+def get_database(request):
+    if request.args and request.args[0] in databases:
+        return eval_in_global_env(request.args[0])
+    else:
+        session.flash = T('invalid request')
+        redirect(URL('index'))
+
+
+def get_table(request):
+    db = get_database(request)
+    if len(request.args) > 1 and request.args[1] in db.tables:
+        return (db, request.args[1])
+    else:
+        session.flash = T('invalid request')
+        redirect(URL('index'))
+
+
+def get_query(request):
+    try:
+        return eval_in_global_env(request.vars.query)
+    except Exception:
+        return None
+
+
+def query_by_table_type(tablename,db,request=request):
+    keyed = hasattr(db[tablename],'_primarykey')
+    if keyed:
+        firstkey = db[tablename][db[tablename]._primarykey[0]]
+        cond = '>0'
+        if firstkey.type in ['string', 'text']:
+            cond = '!=""'
+        qry = '%s.%s.%s%s' % (request.args[0], request.args[1], firstkey.name, cond)
+    else:
+        qry = '%s.%s.id>0' % tuple(request.args[:2])
+    return qry
+
+
+
+# ##########################################################
+# ## list all databases and tables
+# ###########################################################
+
+
+def index():
+    return dict(databases=databases)
+
+
+# ##########################################################
+# ## insert a new record
+# ###########################################################
+
+
+def insert():
+    (db, table) = get_table(request)
+    form = SQLFORM(db[table], ignore_rw=ignore_rw)
+    if form.accepts(request.vars, session):
+        response.flash = T('new record inserted')
+    return dict(form=form,table=db[table])
+
+
+# ##########################################################
+# ## list all records in table and insert new record
+# ###########################################################
+
+
+def download():
+    import os
+    db = get_database(request)
+    return response.download(request,db)
+
+def csv():
+    import gluon.contenttype
+    response.headers['Content-Type'] = \
+        gluon.contenttype.contenttype('.csv')
+    db = get_database(request)
+    query = get_query(request)
+    if not query:
+        return None
+    response.headers['Content-disposition'] = 'attachment; filename=%s_%s.csv'\
+         % tuple(request.vars.query.split('.')[:2])
+    return str(db(query).select())
+
+
+def import_csv(table, file):
+    table.import_from_csv_file(file)
+
+def select():
+    import re
+    db = get_database(request)
+    dbname = request.args[0]
+    regex = re.compile('(?P
    \w+)\.(?P\w+)=(?P\d+)')
+    if len(request.args)>1 and hasattr(db[request.args[1]],'_primarykey'):
+        regex = re.compile('(?P
    \w+)\.(?P\w+)=(?P.+)')
+    if request.vars.query:
+        match = regex.match(request.vars.query)
+        if match:
+            request.vars.query = '%s.%s.%s==%s' % (request.args[0],
+                    match.group('table'), match.group('field'),
+                    match.group('value'))
+    else:
+        request.vars.query = session.last_query
+    query = get_query(request)
+    if request.vars.start:
+        start = int(request.vars.start)
+    else:
+        start = 0
+    nrows = 0
+    stop = start + 100
+    table = None
+    rows = []
+    orderby = request.vars.orderby
+    if orderby:
+        orderby = dbname + '.' + orderby
+        if orderby == session.last_orderby:
+            if orderby[0] == '~':
+                orderby = orderby[1:]
+            else:
+                orderby = '~' + orderby
+    session.last_orderby = orderby
+    session.last_query = request.vars.query
+    form = FORM(TABLE(TR(T('Query:'), '', INPUT(_style='width:400px',
+                _name='query', _value=request.vars.query or '',
+                requires=IS_NOT_EMPTY(error_message=T("Cannot be empty")))), TR(T('Update:'),
+                INPUT(_name='update_check', _type='checkbox',
+                value=False), INPUT(_style='width:400px',
+                _name='update_fields', _value=request.vars.update_fields
+                 or '')), TR(T('Delete:'), INPUT(_name='delete_check',
+                _class='delete', _type='checkbox', value=False), ''),
+                TR('', '', INPUT(_type='submit', _value='submit'))),
+                _action=URL(r=request,args=request.args))
+    if request.vars.csvfile != None:
+        try:
+            import_csv(db[request.vars.table],
+                       request.vars.csvfile.file)
+            response.flash = T('data uploaded')
+        except Exception, e:
+            response.flash = DIV(T('unable to parse csv file'),PRE(str(e)))
+    if form.accepts(request.vars, formname=None):
+#         regex = re.compile(request.args[0] + '\.(?P
    \w+)\.id\>0')
+        regex = re.compile(request.args[0] + '\.(?P
    \w+)\..+')
+
+        match = regex.match(form.vars.query.strip())
+        if match:
+            table = match.group('table')
+        try:
+            nrows = db(query).count()
+            if form.vars.update_check and form.vars.update_fields:
+                db(query).update(**eval_in_global_env('dict(%s)'
+                                  % form.vars.update_fields))
+                response.flash = T('%s rows updated', nrows)
+            elif form.vars.delete_check:
+                db(query).delete()
+                response.flash = T('%s rows deleted', nrows)
+            nrows = db(query).count()
+            if orderby:
+                rows = db(query).select(limitby=(start, stop),
+                        orderby=eval_in_global_env(orderby))
+            else:
+                rows = db(query).select(limitby=(start, stop))
+        except Exception, e:
+            (rows, nrows) = ([], 0)
+            response.flash = DIV(T('Invalid Query'),PRE(str(e)))
+    return dict(
+        form=form,
+        table=table,
+        start=start,
+        stop=stop,
+        nrows=nrows,
+        rows=rows,
+        query=request.vars.query,
+        )
+
+
+# ##########################################################
+# ## edit delete one record
+# ###########################################################
+
+
+def update():
+    (db, table) = get_table(request)
+    keyed = hasattr(db[table],'_primarykey')
+    record = None
+    if keyed:
+        key = [f for f in request.vars if f in db[table]._primarykey]
+        if key:
+            record = db(db[table][key[0]] == request.vars[key[0]]).select().first()
+    else:
+        record = db(db[table].id == request.args(2)).select().first()
+
+    if not record:
+        qry = query_by_table_type(table, db)
+        session.flash = T('record does not exist')
+        redirect(URL('select', args=request.args[:1],
+                     vars=dict(query=qry)))
+
+    if keyed:
+        for k in db[table]._primarykey:
+            db[table][k].writable=False
+
+    form = SQLFORM(db[table], record, deletable=True, delete_label=T('Check to delete'),
+                   ignore_rw=ignore_rw and not keyed,
+                   linkto=URL('select',
+                   args=request.args[:1]), upload=URL(r=request,
+                   f='download', args=request.args[:1]))
+
+    if form.accepts(request.vars, session):
+        session.flash = T('done!')
+        qry = query_by_table_type(table, db)
+        redirect(URL('select', args=request.args[:1],
+                 vars=dict(query=qry)))
+    return dict(form=form,table=db[table])
+
+
+# ##########################################################
+# ## get global variables
+# ###########################################################
+
+
+def state():
+    return dict()
+
+def ccache():
+    form = FORM(
+        P(TAG.BUTTON("Clear CACHE?", _type="submit", _name="yes", _value="yes")),
+        P(TAG.BUTTON("Clear RAM", _type="submit", _name="ram", _value="ram")),
+        P(TAG.BUTTON("Clear DISK", _type="submit", _name="disk", _value="disk")),
+    )
+
+    if form.accepts(request.vars, session):
+        clear_ram = False
+        clear_disk = False
+        session.flash = ""
+        if request.vars.yes:
+            clear_ram = clear_disk = True
+        if request.vars.ram:
+            clear_ram = True
+        if request.vars.disk:
+            clear_disk = True
+
+        if clear_ram:
+            cache.ram.clear()
+            session.flash += "Ram Cleared "
+        if clear_disk:
+            cache.disk.clear()
+            session.flash += "Disk Cleared"
+
+        redirect(URL(r=request))
+
+    try:
+        from guppy import hpy; hp=hpy()
+    except ImportError:
+        hp = False
+
+    import shelve, os, copy, time, math
+    from gluon import portalocker
+
+    ram = {
+        'bytes': 0,
+        'objects': 0,
+        'hits': 0,
+        'misses': 0,
+        'ratio': 0,
+        'oldest': time.time()
+    }
+    disk = copy.copy(ram)
+    total = copy.copy(ram)
+
+    for key, value in cache.ram.storage.items():
+        if isinstance(value, dict):
+            ram['hits'] = value['hit_total'] - value['misses']
+            ram['misses'] = value['misses']
+            try:
+                ram['ratio'] = ram['hits'] * 100 / value['hit_total']
+            except (KeyError, ZeroDivisionError):
+                ram['ratio'] = 0
+        else:
+            if hp:
+                ram['bytes'] += hp.iso(value[1]).size
+                ram['objects'] += hp.iso(value[1]).count
+
+                if value[0] < ram['oldest']:
+                    ram['oldest'] = value[0]
+
+    locker = open(os.path.join(request.folder,
+                                        'cache/cache.lock'), 'a')
+    portalocker.lock(locker, portalocker.LOCK_EX)
+    disk_storage = shelve.open(os.path.join(request.folder, 'cache/cache.shelve'))
+    try:
+        for key, value in disk_storage.items():
+            if isinstance(value, dict):
+                disk['hits'] = value['hit_total'] - value['misses']
+                disk['misses'] = value['misses']
+                try:
+                    disk['ratio'] = disk['hits'] * 100 / value['hit_total']
+                except (KeyError, ZeroDivisionError):
+                    disk['ratio'] = 0
+            else:
+                if hp:
+                    disk['bytes'] += hp.iso(value[1]).size
+                    disk['objects'] += hp.iso(value[1]).count
+                    if value[0] < disk['oldest']:
+                        disk['oldest'] = value[0]
+    finally:
+        portalocker.unlock(locker)
+        locker.close()
+        disk_storage.close()
+
+    total['bytes'] = ram['bytes'] + disk['bytes']
+    total['objects'] = ram['objects'] + disk['objects']
+    total['hits'] = ram['hits'] + disk['hits']
+    total['misses'] = ram['misses'] + disk['misses']
+    try:
+        total['ratio'] = total['hits'] * 100 / (total['hits'] + total['misses'])
+    except (KeyError, ZeroDivisionError):
+        total['ratio'] = 0
+
+    if disk['oldest'] < ram['oldest']:
+        total['oldest'] = disk['oldest']
+    else:
+        total['oldest'] = ram['oldest']
+
+    def GetInHMS(seconds):
+        hours = math.floor(seconds / 3600)
+        seconds -= hours * 3600
+        minutes = math.floor(seconds / 60)
+        seconds -= minutes * 60
+        seconds = math.floor(seconds)
+
+        return (hours, minutes, seconds)
+
+    ram['oldest'] = GetInHMS(time.time() - ram['oldest'])
+    disk['oldest'] = GetInHMS(time.time() - disk['oldest'])
+    total['oldest'] = GetInHMS(time.time() - total['oldest'])
+
+    return dict(form=form, total=total,
+                ram=ram, disk=disk)
+

ADDED   applications/welcome/controllers/default.py
Index: applications/welcome/controllers/default.py
==================================================================
--- /dev/null
+++ applications/welcome/controllers/default.py
@@ -0,0 +1,69 @@
+# -*- coding: utf-8 -*-
+# this file is released under public domain and you can use without limitations
+
+#########################################################################
+## This is a samples controller
+## - index is the default action of any application
+## - user is required for authentication and authorization
+## - download is for downloading files uploaded in the db (does streaming)
+## - call exposes all registered services (none by default)
+#########################################################################
+
+def index():
+    """
+    example action using the internationalization operator T and flash
+    rendered by views/default/index.html or views/generic.html
+    """
+    return dict(message=T('Hello World'))
+
+def user():
+    """
+    exposes:
+    http://..../[app]/default/user/login
+    http://..../[app]/default/user/logout
+    http://..../[app]/default/user/register
+    http://..../[app]/default/user/profile
+    http://..../[app]/default/user/retrieve_password
+    http://..../[app]/default/user/change_password
+    use @auth.requires_login()
+        @auth.requires_membership('group name')
+        @auth.requires_permission('read','table name',record_id)
+    to decorate functions that need access control
+    """
+    return dict(form=auth())
+
+
+def download():
+    """
+    allows downloading of uploaded files
+    http://..../[app]/default/download/[filename]
+    """
+    return response.download(request,db)
+
+
+def call():
+    """
+    exposes services. for example:
+    http://..../[app]/default/call/jsonrpc
+    decorate with @services.jsonrpc the functions to expose
+    supports xml, json, xmlrpc, jsonrpc, amfrpc, rss, csv
+    """
+    return service()
+
+
+@auth.requires_signature()
+def data():
+    """
+    http://..../[app]/default/data/tables
+    http://..../[app]/default/data/create/[table]
+    http://..../[app]/default/data/read/[table]/[id]
+    http://..../[app]/default/data/update/[table]/[id]
+    http://..../[app]/default/data/delete/[table]/[id[
+    http://..../[app]/default/data/select/[table]
+    http://..../[app]/default/data/search/[table]
+    but URLs bust be signed, i.e. linked with
+      A('table',_href=URL('data/tables',user_signature=True))
+    or with the signed load operator
+      LOAD('default','data.load',args='tables',ajax=True,user_signature=True)
+    """
+    return dict(form=crud())

ADDED   applications/welcome/cron/crontab
Index: applications/welcome/cron/crontab
==================================================================
--- /dev/null
+++ applications/welcome/cron/crontab
@@ -0,0 +1,1 @@
+#crontab

ADDED   applications/welcome/languages/es-es.py
Index: applications/welcome/languages/es-es.py
==================================================================
--- /dev/null
+++ applications/welcome/languages/es-es.py
@@ -0,0 +1,259 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"actualice" es una expresión opcional como "campo1=\'nuevo_valor\'". No se puede actualizar o eliminar resultados de un JOIN',
+'%Y-%m-%d': '%Y-%m-%d',
+'%Y-%m-%d %H:%M:%S': '%Y-%m-%d %H:%M:%S',
+'%s rows deleted': '%s filas eliminadas',
+'%s rows updated': '%s filas actualizadas',
+'(something like "it-it")': '(algo como "it-it")',
+'A new version of web2py is available': 'Hay una nueva versión de web2py disponible',
+'A new version of web2py is available: %s': 'Hay una nueva versión de web2py disponible: %s',
+'ATTENTION: Login requires a secure (HTTPS) connection or running on localhost.': 'ATENCION: Inicio de sesión requiere una conexión segura (HTTPS) o localhost.',
+'ATTENTION: TESTING IS NOT THREAD SAFE SO DO NOT PERFORM MULTIPLE TESTS CONCURRENTLY.': 'ATENCION: NO EJECUTE VARIAS PRUEBAS SIMULTANEAMENTE, NO SON THREAD SAFE.',
+'ATTENTION: you cannot edit the running application!': 'ATENCION: no puede modificar la aplicación que se ejecuta!',
+'About': 'Acerca de',
+'About application': 'Acerca de la aplicación',
+'Admin is disabled because insecure channel': 'Admin deshabilitado, el canal no es seguro',
+'Admin is disabled because unsecure channel': 'Admin deshabilitado, el canal no es seguro',
+'Administrator Password:': 'Contraseña del Administrador:',
+'Are you sure you want to delete file "%s"?': '¿Está seguro que desea eliminar el archivo "%s"?',
+'Are you sure you want to uninstall application "%s"': '¿Está seguro que desea desinstalar la aplicación "%s"',
+'Are you sure you want to uninstall application "%s"?': '¿Está seguro que desea desinstalar la aplicación "%s"?',
+'Authentication': 'Autenticación',
+'Available databases and tables': 'Bases de datos y tablas disponibles',
+'Cannot be empty': 'No puede estar vacío',
+'Cannot compile: there are errors in your app.        Debug it, correct errors and try again.': 'No se puede compilar: hay errores en su aplicación. Depure, corrija errores y vuelva a intentarlo.',
+'Change Password': 'Cambie Contraseña',
+'Check to delete': 'Marque para eliminar',
+'Client IP': 'IP del Cliente',
+'Controller': 'Controlador',
+'Controllers': 'Controladores',
+'Copyright': 'Derechos de autor',
+'Create new application': 'Cree una nueva aplicación',
+'Current request': 'Solicitud en curso',
+'Current response': 'Respuesta en curso',
+'Current session': 'Sesión en curso',
+'DB Model': 'Modelo "db"',
+'DESIGN': 'DISEÑO',
+'Database': 'Base de datos',
+'Date and Time': 'Fecha y Hora',
+'Delete': 'Elimine',
+'Delete:': 'Elimine:',
+'Deploy on Google App Engine': 'Instale en Google App Engine',
+'Description': 'Descripción',
+'Design for': 'Diseño para',
+'E-mail': 'Correo electrónico',
+'EDIT': 'EDITAR',
+'Edit': 'Editar',
+'Edit Profile': 'Editar Perfil',
+'Edit This App': 'Edite esta App',
+'Edit application': 'Editar aplicación',
+'Edit current record': 'Edite el registro actual',
+'Editing file': 'Editando archivo',
+'Editing file "%s"': 'Editando archivo "%s"',
+'Error logs for "%(app)s"': 'Bitácora de errores en "%(app)s"',
+'First name': 'Nombre',
+'Functions with no doctests will result in [passed] tests.': 'Funciones sin doctests equivalen a pruebas [aceptadas].',
+'Group ID': 'ID de Grupo',
+'Hello World': 'Hola Mundo',
+'Import/Export': 'Importar/Exportar',
+'Index': 'Indice',
+'Installed applications': 'Aplicaciones instaladas',
+'Internal State': 'Estado Interno',
+'Invalid Query': 'Consulta inválida',
+'Invalid action': 'Acción inválida',
+'Invalid email': 'Correo inválido',
+'Language files (static strings) updated': 'Archivos de lenguaje (cadenas estáticas) actualizados',
+'Languages': 'Lenguajes',
+'Last name': 'Apellido',
+'Last saved on:': 'Guardado en:',
+'Layout': 'Diseño de página',
+'License for': 'Licencia para',
+'Login': 'Inicio de sesión',
+'Login to the Administrative Interface': 'Inicio de sesión para la Interfaz Administrativa',
+'Logout': 'Fin de sesión',
+'Lost Password': 'Contraseña perdida',
+'Main Menu': 'Menú principal',
+'Menu Model': 'Modelo "menu"',
+'Models': 'Modelos',
+'Modules': 'Módulos',
+'NO': 'NO',
+'Name': 'Nombre',
+'New Record': 'Registro nuevo',
+'No databases in this application': 'No hay bases de datos en esta aplicación',
+'Origin': 'Origen',
+'Original/Translation': 'Original/Traducción',
+'Password': 'Contraseña',
+'Peeking at file': 'Visualizando archivo',
+'Powered by': 'Este sitio usa',
+'Query:': 'Consulta:',
+'Record ID': 'ID de Registro',
+'Register': 'Registrese',
+'Registration key': 'Contraseña de Registro',
+'Reset Password key': 'Reset Password key',
+'Resolve Conflict file': 'archivo Resolución de Conflicto',
+'Role': 'Rol',
+'Rows in table': 'Filas en la tabla',
+'Rows selected': 'Filas seleccionadas',
+'Saved file hash:': 'Hash del archivo guardado:',
+'Static files': 'Archivos estáticos',
+'Stylesheet': 'Hoja de estilo',
+'Sure you want to delete this object?': '¿Está seguro que desea eliminar este objeto?',
+'Table name': 'Nombre de la tabla',
+'Testing application': 'Probando aplicación',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': 'La "consulta" es una condición como "db.tabla1.campo1==\'valor\'". Algo como "db.tabla1.campo1==db.tabla2.campo2" resulta en un JOIN SQL.',
+'The output of the file is a dictionary that was rendered by the view': 'La salida del archivo es un diccionario escenificado por la vista',
+'There are no controllers': 'No hay controladores',
+'There are no models': 'No hay modelos',
+'There are no modules': 'No hay módulos',
+'There are no static files': 'No hay archivos estáticos',
+'There are no translators, only default language is supported': 'No hay traductores, sólo el lenguaje por defecto es soportado',
+'There are no views': 'No hay vistas',
+'This is a copy of the scaffolding application': 'Esta es una copia de la aplicación de andamiaje',
+'This is the %(filename)s template': 'Esta es la plantilla %(filename)s',
+'Ticket': 'Tiquete',
+'Timestamp': 'Timestamp',
+'Unable to check for upgrades': 'No es posible verificar la existencia de actualizaciones',
+'Unable to download': 'No es posible la descarga',
+'Unable to download app': 'No es posible descarga la aplicación',
+'Update:': 'Actualice:',
+'Upload existing application': 'Suba esta aplicación',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Use (...)&(...) para AND, (...)|(...) para OR, y ~(...) para NOT, para crear consultas más complejas.',
+'User ID': 'ID de Usuario',
+'View': 'Vista',
+'Views': 'Vistas',
+'Welcome': 'Welcome',
+'Welcome %s': 'Bienvenido %s',
+'Welcome to web2py': 'Bienvenido a web2py',
+'Which called the function': 'La cual llamó la función',
+'YES': 'SI',
+'You are successfully running web2py': 'Usted está ejecutando web2py exitosamente',
+'You can modify this application and adapt it to your needs': 'Usted puede modificar esta aplicación y adaptarla a sus necesidades',
+'You visited the url': 'Usted visitó la url',
+'about': 'acerca de',
+'additional code for your application': 'código adicional para su aplicación',
+'admin disabled because no admin password': ' por falta de contraseña',
+'admin disabled because not supported on google app engine': 'admin deshabilitado, no es soportado en GAE',
+'admin disabled because unable to access password file': 'admin deshabilitado, imposible acceder al archivo con la contraseña',
+'and rename it (required):': 'y renombrela (requerido):',
+'and rename it:': ' y renombrelo:',
+'appadmin': 'appadmin',
+'appadmin is disabled because insecure channel': 'admin deshabilitado, el canal no es seguro',
+'application "%s" uninstalled': 'aplicación "%s" desinstalada',
+'application compiled': 'aplicación compilada',
+'application is compiled and cannot be designed': 'la aplicación está compilada y no puede ser modificada',
+'cache': 'cache',
+'cache, errors and sessions cleaned': 'cache, errores y sesiones eliminados',
+'cannot create file': 'no es posible crear archivo',
+'cannot upload file "%(filename)s"': 'no es posible subir archivo "%(filename)s"',
+'change password': 'cambie contraseña',
+'check all': 'marcar todos',
+'clean': 'limpiar',
+'Online examples': 'Ejemplos en línea',
+'Administrative interface': 'Interfaz administrativa',
+'click to check for upgrades': 'haga clic para buscar actualizaciones',
+'compile': 'compilar',
+'compiled application removed': 'aplicación compilada removida',
+'controllers': 'controladores',
+'create file with filename:': 'cree archivo con nombre:',
+'create new application:': 'nombre de la nueva aplicación:',
+'crontab': 'crontab',
+'currently saved or': 'actualmente guardado o',
+'customize me!': 'Adaptame!',
+'data uploaded': 'datos subidos',
+'database': 'base de datos',
+'database %s select': 'selección en base de datos %s',
+'database administration': 'administración base de datos',
+'db': 'db',
+'defines tables': 'define tablas',
+'delete': 'eliminar',
+'delete all checked': 'eliminar marcados',
+'design': 'modificar',
+'Documentation': 'Documentación',
+'done!': 'listo!',
+'edit': 'editar',
+'edit controller': 'editar controlador',
+'edit profile': 'editar perfil',
+'errors': 'errores',
+'export as csv file': 'exportar como archivo CSV',
+'exposes': 'expone',
+'extends': 'extiende',
+'failed to reload module': 'recarga del módulo ha fallado',
+'file "%(filename)s" created': 'archivo "%(filename)s" creado',
+'file "%(filename)s" deleted': 'archivo "%(filename)s" eliminado',
+'file "%(filename)s" uploaded': 'archivo "%(filename)s" subido',
+'file "%(filename)s" was not deleted': 'archivo "%(filename)s" no fué eliminado',
+'file "%s" of %s restored': 'archivo "%s" de %s restaurado',
+'file changed on disk': 'archivo modificado en el disco',
+'file does not exist': 'archivo no existe',
+'file saved on %(time)s': 'archivo guardado %(time)s',
+'file saved on %s': 'archivo guardado %s',
+'help': 'ayuda',
+'htmledit': 'htmledit',
+'includes': 'incluye',
+'insert new': 'inserte nuevo',
+'insert new %s': 'inserte nuevo %s',
+'internal error': 'error interno',
+'invalid password': 'contraseña inválida',
+'invalid request': 'solicitud inválida',
+'invalid ticket': 'tiquete inválido',
+'language file "%(filename)s" created/updated': 'archivo de lenguaje "%(filename)s" creado/actualizado',
+'languages': 'lenguajes',
+'languages updated': 'lenguajes actualizados',
+'loading...': 'cargando...',
+'located in the file': 'localizada en el archivo',
+'login': 'inicio de sesión',
+'logout': 'fin de sesión',
+'lost password?': '¿olvido la contraseña?',
+'merge': 'combinar',
+'models': 'modelos',
+'modules': 'módulos',
+'new application "%s" created': 'nueva aplicación "%s" creada',
+'new record inserted': 'nuevo registro insertado',
+'next 100 rows': '100 filas siguientes',
+'or import from csv file': 'o importar desde archivo CSV',
+'or provide application url:': 'o provea URL de la aplicación:',
+'pack all': 'empaquetar todo',
+'pack compiled': 'empaquete compiladas',
+'previous 100 rows': '100 filas anteriores',
+'record': 'registro',
+'record does not exist': 'el registro no existe',
+'record id': 'id de registro',
+'register': 'registrese',
+'remove compiled': 'eliminar compiladas',
+'restore': 'restaurar',
+'revert': 'revertir',
+'save': 'guardar',
+'selected': 'seleccionado(s)',
+'session expired': 'sesión expirada',
+'shell': 'shell',
+'site': 'sitio',
+'some files could not be removed': 'algunos archivos no pudieron ser removidos',
+'state': 'estado',
+'static': 'estáticos',
+'table': 'tabla',
+'test': 'probar',
+'the application logic, each URL path is mapped in one exposed function in the controller': 'la lógica de la aplicación, cada ruta URL se mapea en una función expuesta en el controlador',
+'the data representation, define database tables and sets': 'la representación de datos, define tablas y conjuntos de base de datos',
+'the presentations layer, views are also known as templates': 'la capa de presentación, las vistas también son llamadas plantillas',
+'these files are served without processing, your images go here': 'estos archivos son servidos sin procesar, sus imágenes van aquí',
+'to  previous version.': 'a la versión previa.',
+'translation strings for the application': 'cadenas de caracteres de traducción para la aplicación',
+'try': 'intente',
+'try something like': 'intente algo como',
+'unable to create application "%s"': 'no es posible crear la aplicación "%s"',
+'unable to delete file "%(filename)s"': 'no es posible eliminar el archivo "%(filename)s"',
+'unable to parse csv file': 'no es posible analizar el archivo CSV',
+'unable to uninstall "%s"': 'no es posible instalar "%s"',
+'uncheck all': 'desmarcar todos',
+'uninstall': 'desinstalar',
+'update': 'actualizar',
+'update all languages': 'actualizar todos los lenguajes',
+'upload application:': 'subir aplicación:',
+'upload file:': 'suba archivo:',
+'versioning': 'versiones',
+'view': 'vista',
+'views': 'vistas',
+'web2py Recent Tweets': 'Tweets Recientes de web2py',
+'web2py is up to date': 'web2py está actualizado',
+}

ADDED   applications/welcome/languages/fr-ca.py
Index: applications/welcome/languages/fr-ca.py
==================================================================
--- /dev/null
+++ applications/welcome/languages/fr-ca.py
@@ -0,0 +1,167 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"update" est une expression optionnelle comme "champ1=\'nouvellevaleur\'". Vous ne pouvez mettre à jour ou supprimer les résultats d\'un JOIN',
+'%Y-%m-%d': '%Y-%m-%d',
+'%Y-%m-%d %H:%M:%S': '%Y-%m-%d %H:%M:%S',
+'%s rows deleted': '%s rangées supprimées',
+'%s rows updated': '%s rangées mises à jour',
+'About': 'À propos',
+'Access Control': "Contrôle d'accès",
+'Administrative interface': "Interface d'administration",
+'Ajax Recipes': 'Recettes Ajax',
+'Are you sure you want to delete this object?': 'Êtes-vous sûr de vouloir supprimer cet objet?',
+'Authentication': 'Authentification',
+'Available databases and tables': 'Bases de données et tables disponibles',
+'Buy this book': 'Acheter ce livre',
+'Cannot be empty': 'Ne peut pas être vide',
+'Check to delete': 'Cliquez pour supprimer',
+'Check to delete:': 'Cliquez pour supprimer:',
+'Client IP': 'IP client',
+'Community': 'Communauté',
+'Controller': 'Contrôleur',
+'Copyright': "Droit d'auteur",
+'Current request': 'Demande actuelle',
+'Current response': 'Réponse actuelle',
+'Current session': 'Session en cours',
+'DB Model': 'Modèle DB',
+'Database': 'Base de données',
+'Delete:': 'Supprimer:',
+'Demo': 'Démo',
+'Deployment Recipes': 'Recettes de déploiement ',
+'Description': 'Descriptif',
+'Documentation': 'Documentation',
+'Download': 'Téléchargement',
+'E-mail': 'Courriel',
+'Edit': 'Éditer',
+'Edit This App': 'Modifier cette application',
+'Edit current record': "Modifier l'enregistrement courant",
+'Errors': 'Erreurs',
+'FAQ': 'faq',
+'First name': 'Prénom',
+'Forms and Validators': 'Formulaires et Validateurs',
+'Free Applications': 'Applications gratuites',
+'Function disabled': 'Fonction désactivée',
+'Group %(group_id)s created': '%(group_id)s groupe créé',
+'Group ID': 'Groupe ID',
+'Group uniquely assigned to user %(id)s': "Groupe unique attribué à l'utilisateur %(id)s",
+'Groups': 'Groupes',
+'Hello World': 'Bonjour le monde',
+'Home': 'Accueil',
+'Import/Export': 'Importer/Exporter',
+'Index': 'Index',
+'Internal State': 'État interne',
+'Introduction': 'Présentation',
+'Invalid Query': 'Requête Invalide',
+'Invalid email': 'Courriel invalide',
+'Last name': 'Nom',
+'Layout': 'Mise en page',
+'Layouts': 'layouts',
+'Live chat': 'Clavardage en direct',
+'Logged in': 'Connecté',
+'Login': 'Connectez-vous',
+'Lost Password': 'Mot de passe perdu',
+'Main Menu': 'Menu principal',
+'Menu Model': 'Menu modèle',
+'Name': 'Nom',
+'New Record': 'Nouvel enregistrement',
+'No databases in this application': "Cette application n'a pas de bases de données",
+'Online examples': 'Exemples en ligne',
+'Origin': 'Origine',
+'Other Recipes': 'Autres recettes',
+'Overview': 'Présentation',
+'Password': 'Mot de passe',
+"Password fields don't match": 'Les mots de passe ne correspondent pas',
+'Plugins': 'Plugiciels',
+'Powered by': 'Alimenté par',
+'Preface': 'Préface',
+'Python': 'Python',
+'Query:': 'Requête:',
+'Quick Examples': 'Examples Rapides',
+'Readme': 'Lisez-moi',
+'Recipes': 'Recettes',
+'Record %(id)s created': 'Record %(id)s created',
+'Record %(id)s updated': 'Record %(id)s updated',
+'Record Created': 'Record Created',
+'Record ID': "ID d'enregistrement",
+'Record Updated': 'Record Updated',
+'Register': "S'inscrire",
+'Registration key': "Clé d'enregistrement",
+'Registration successful': 'Inscription réussie',
+'Remember me (for 30 days)': 'Se souvenir de moi (pendant 30 jours)',
+'Request reset password': 'Demande de réinitialiser le mot clé',
+'Reset Password key': 'Réinitialiser le mot clé',
+'Resources': 'Ressources',
+'Role': 'Rôle',
+'Rows in table': 'Lignes du tableau',
+'Rows selected': 'Lignes sélectionnées',
+'Semantic': 'Sémantique',
+'Services': 'Services',
+'Stylesheet': 'Feuille de style',
+'Submit': 'Soumettre',
+'Support': 'Soutien',
+'Sure you want to delete this object?': 'Êtes-vous sûr de vouloir supprimer cet objet?',
+'Table name': 'Nom du tableau',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': 'La "query" est une condition comme "db.table1.champ1==\'valeur\'". Quelque chose comme "db.table1.champ1==db.table2.champ2" résulte en un JOIN SQL.',
+'The Core': 'Le noyau',
+'The Views': 'Les Vues',
+'The output of the file is a dictionary that was rendered by the view': 'La sortie de ce fichier est un dictionnaire qui été restitué par la vue',
+'This App': 'Cette Appli',
+'This is a copy of the scaffolding application': "Ceci est une copie de l'application échafaudage",
+'Timestamp': 'Horodatage',
+'Twitter': 'Twitter',
+'Update:': 'Mise à jour:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Employez (...)&(...) pour AND, (...)|(...) pour OR, and ~(...)  pour NOT pour construire des requêtes plus complexes.',
+'User %(id)s Logged-in': 'Utilisateur %(id)s connecté',
+'User %(id)s Registered': 'Utilisateur %(id)s enregistré',
+'User ID': 'ID utilisateur',
+'User Voice': 'User Voice',
+'Verify Password': 'Vérifiez le mot de passe',
+'Videos': 'Vidéos',
+'View': 'Présentation',
+'Web2py': 'Web2py',
+'Welcome': 'Bienvenu',
+'Welcome %s': 'Bienvenue %s',
+'Welcome to web2py': 'Bienvenue à web2py',
+'Which called the function': 'Qui a appelé la fonction',
+'You are successfully running web2py': 'Vous roulez avec succès web2py',
+'You can modify this application and adapt it to your needs': "Vous pouvez modifier cette application et l'adapter à vos besoins",
+'You visited the url': "Vous avez visité l'URL",
+'about': 'à propos',
+'appadmin is disabled because insecure channel': "appadmin est désactivée parce que le canal n'est pas sécurisé",
+'cache': 'cache',
+'change password': 'changer le mot de passe',
+'customize me!': 'personnalisez-moi!',
+'data uploaded': 'données téléchargées',
+'database': 'base de données',
+'database %s select': 'base de données %s select',
+'db': 'db',
+'design': 'design',
+'done!': 'fait!',
+'edit profile': 'modifier le profil',
+'enter an integer between %(min)g and %(max)g': 'entrer un entier compris entre %(min)g et %(max)g',
+'export as csv file': 'exporter sous forme de fichier csv',
+'insert new': 'insérer un nouveau',
+'insert new %s': 'insérer un nouveau %s',
+'invalid request': 'requête invalide',
+'located in the file': 'se trouvant dans le fichier',
+'login': 'connectez-vous',
+'logout': 'déconnectez-vous',
+'lost password': 'mot de passe perdu',
+'lost password?': 'mot de passe perdu?',
+'new record inserted': 'nouvel enregistrement inséré',
+'next 100 rows': '100 prochaines lignes',
+'or import from csv file': "ou importer d'un fichier CSV",
+'password': 'mot de passe',
+'please input your password again': "S'il vous plaît entrer votre mot de passe",
+'previous 100 rows': '100 lignes précédentes',
+'profile': 'profile',
+'record': 'enregistrement',
+'record does not exist': "l'archive n'existe pas",
+'record id': "id d'enregistrement",
+'register': "s'inscrire",
+'selected': 'sélectionné',
+'state': 'état',
+'table': 'tableau',
+'unable to parse csv file': "incapable d'analyser le fichier cvs",
+'value already in database or empty': 'valeur déjà dans la base ou vide',
+}

ADDED   applications/welcome/languages/fr-fr.py
Index: applications/welcome/languages/fr-fr.py
==================================================================
--- /dev/null
+++ applications/welcome/languages/fr-fr.py
@@ -0,0 +1,155 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"update" est une expression optionnelle comme "champ1=\'nouvellevaleur\'". Vous ne pouvez mettre à jour ou supprimer les résultats d\'un JOIN',
+'%Y-%m-%d': '%Y-%m-%d',
+'%Y-%m-%d %H:%M:%S': '%Y-%m-%d %H:%M:%S',
+'%s rows deleted': '%s rangées supprimées',
+'%s rows updated': '%s rangées mises à jour',
+'About': 'À propos',
+'Access Control': 'Contrôle d\'accès',
+'Ajax Recipes': 'Recettes Ajax',
+'Are you sure you want to delete this object?': 'Êtes-vous sûr de vouloir supprimer cet objet?',
+'Authentication': 'Authentification',
+'Available databases and tables': 'Bases de données et tables disponibles',
+'Buy this book': 'Acheter ce livre',
+'Cannot be empty': 'Ne peut pas être vide',
+'Check to delete': 'Cliquez pour supprimer',
+'Check to delete:': 'Cliquez pour supprimer:',
+'Client IP': 'IP client',
+'Community': 'Communauté',
+'Controller': 'Contrôleur',
+'Copyright': 'Copyright',
+'Current request': 'Demande actuelle',
+'Current response': 'Réponse actuelle',
+'Current session': 'Session en cours',
+'DB Model': 'Modèle DB',
+'Database': 'Base de données',
+'Delete:': 'Supprimer:',
+'Demo': 'Démo',
+'Deployment Recipes': 'Recettes de déploiement',
+'Description': 'Description',
+'Documentation': 'Documentation',
+'Download': 'Téléchargement',
+'E-mail': 'E-mail',
+'Edit': 'Éditer',
+'Edit This App': 'Modifier cette application',
+'Edit current record': "Modifier l'enregistrement courant",
+'Errors': 'Erreurs',
+'FAQ': 'FAQ',
+'First name': 'Prénom',
+'Forms and Validators': 'Formulaires et Validateurs',
+'Free Applications': 'Applications gratuites',
+'Function disabled': 'Fonction désactivée',
+'Group ID': 'Groupe ID',
+'Groups': 'Groups',
+'Hello World': 'Bonjour le monde',
+'Home': 'Accueil',
+'Import/Export': 'Importer/Exporter',
+'Index': 'Index',
+'Internal State': 'État interne',
+'Introduction': 'Introduction',
+'Invalid Query': 'Requête Invalide',
+'Invalid email': 'E-mail invalide',
+'Last name': 'Nom',
+'Layout': 'Mise en page',
+'Layouts': 'Layouts',
+'Live chat': 'Chat live',
+'Login': 'Connectez-vous',
+'Lost Password': 'Mot de passe perdu',
+'Main Menu': 'Menu principal',
+'Menu Model': 'Menu modèle',
+'Name': 'Nom',
+'New Record': 'Nouvel enregistrement',
+'No databases in this application': "Cette application n'a pas de bases de données",
+'Origin': 'Origine',
+'Other Recipes': 'Autres recettes',
+'Overview': 'Présentation',
+'Password': 'Mot de passe',
+"Password fields don't match": 'Les mots de passe ne correspondent pas',
+'Plugins': 'Plugiciels',
+'Powered by': 'Alimenté par',
+'Preface': 'Préface',
+'Python': 'Python',
+'Query:': 'Requête:',
+'Quick Examples': 'Examples Rapides',
+'Recipes': 'Recettes',
+'Record ID': 'ID d\'enregistrement',
+'Register': "S'inscrire",
+'Registration key': "Clé d'enregistrement",
+'Remember me (for 30 days)': 'Se souvenir de moi (pendant 30 jours)',
+'Request reset password': 'Demande de réinitialiser le mot clé',
+'Reset Password key': 'Réinitialiser le mot clé',
+'Resources': 'Ressources',
+'Role': 'Rôle',
+'Rows in table': 'Lignes du tableau',
+'Rows selected': 'Lignes sélectionnées',
+'Semantic': 'Sémantique',
+'Services': 'Services',
+'Stylesheet': 'Feuille de style',
+'Submit': 'Soumettre',
+'Support': 'Support',
+'Sure you want to delete this object?': 'Êtes-vous sûr de vouloir supprimer cet objet?',
+'Table name': 'Nom du tableau',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': 'La "query" est une condition comme "db.table1.champ1==\'valeur\'". Quelque chose comme "db.table1.champ1==db.table2.champ2" résulte en un JOIN SQL.',
+'The Core': 'Le noyau',
+'The Views': 'Les Vues',
+'The output of the file is a dictionary that was rendered by the view': 'La sortie de ce fichier est un dictionnaire qui été restitué par la vue',
+'This App': 'Cette Appli',
+'This is a copy of the scaffolding application': 'Ceci est une copie de l\'application échafaudage',
+'Timestamp': 'Horodatage',
+'Twitter': 'Twitter',
+'Update:': 'Mise à jour:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Employez (...)&(...) pour AND, (...)|(...) pour OR, and ~(...)  pour NOT pour construire des requêtes plus complexes.',
+'User %(id)s Logged-in': 'Utilisateur %(id)s connecté',
+'User %(id)s Registered': 'Utilisateur %(id)s enregistré',
+'User ID': 'ID utilisateur',
+'User Voice': 'User Voice',
+'Verify Password': 'Vérifiez le mot de passe',
+'Videos': 'Vidéos',
+'View': 'Présentation',
+'Web2py': 'Web2py',
+'Welcome': 'Bienvenu',
+'Welcome %s': 'Bienvenue %s',
+'Welcome to web2py': 'Bienvenue à web2py',
+'Which called the function': 'Qui a appelé la fonction',
+'You are successfully running web2py': 'Vous roulez avec succès web2py',
+'You can modify this application and adapt it to your needs': 'Vous pouvez modifier cette application et l\'adapter à vos besoins',
+'You visited the url': 'Vous avez visité l\'URL',
+'appadmin is disabled because insecure channel': "appadmin est désactivée parce que le canal n'est pas sécurisé",
+'cache': 'cache',
+'change password': 'changer le mot de passe',
+'Online examples': 'Exemples en ligne',
+'Administrative interface': "Interface d'administration",
+'customize me!': 'personnalisez-moi!',
+'data uploaded': 'données téléchargées',
+'database': 'base de données',
+'database %s select': 'base de données %s select',
+'db': 'db',
+'design': 'design',
+'Documentation': 'Documentation',
+'done!': 'fait!',
+'edit profile': 'modifier le profil',
+'enter an integer between %(min)g and %(max)g': 'enter an integer between %(min)g and %(max)g',
+'export as csv file': 'exporter sous forme de fichier csv',
+'insert new': 'insérer un nouveau',
+'insert new %s': 'insérer un nouveau %s',
+'invalid request': 'requête invalide',
+'located in the file': 'se trouvant dans le fichier',
+'login': 'connectez-vous',
+'logout': 'déconnectez-vous',
+'lost password': 'mot de passe perdu',
+'lost password?': 'mot de passe perdu?',
+'new record inserted': 'nouvel enregistrement inséré',
+'next 100 rows': '100 prochaines lignes',
+'or import from csv file': "ou importer d'un fichier CSV",
+'previous 100 rows': '100 lignes précédentes',
+'record': 'enregistrement',
+'record does not exist': "l'archive n'existe pas",
+'record id': "id d'enregistrement",
+'register': "s'inscrire",
+'selected': 'sélectionné',
+'state': 'état',
+'table': 'tableau',
+'unable to parse csv file': "incapable d'analyser le fichier cvs",
+'Readme': "Lisez-moi",
+}

ADDED   applications/welcome/languages/hi-hi.py
Index: applications/welcome/languages/hi-hi.py
==================================================================
--- /dev/null
+++ applications/welcome/languages/hi-hi.py
@@ -0,0 +1,82 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN',
+'%Y-%m-%d': '%Y-%m-%d',
+'%Y-%m-%d %H:%M:%S': '%Y-%m-%d %H:%M:%S',
+'%s rows deleted': '%s \xe0\xa4\xaa\xe0\xa4\x82\xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa4\xbf\xe0\xa4\xaf\xe0\xa4\xbe\xe0\xa4\x81 \xe0\xa4\xae\xe0\xa4\xbf\xe0\xa4\x9f\xe0\xa4\xbe\xe0\xa4\x8f\xe0\xa4\x81',
+'%s rows updated': '%s \xe0\xa4\xaa\xe0\xa4\x82\xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa4\xbf\xe0\xa4\xaf\xe0\xa4\xbe\xe0\xa4\x81  \xe0\xa4\x85\xe0\xa4\xa6\xe0\xa5\x8d\xe0\xa4\xaf\xe0\xa4\xa4\xe0\xa4\xa8',
+'Available databases and tables': '\xe0\xa4\x89\xe0\xa4\xaa\xe0\xa4\xb2\xe0\xa4\xac\xe0\xa5\x8d\xe0\xa4\xa7  \xe0\xa4\xa1\xe0\xa5\x87\xe0\xa4\x9f\xe0\xa4\xbe\xe0\xa4\xac\xe0\xa5\x87\xe0\xa4\xb8 \xe0\xa4\x94\xe0\xa4\xb0 \xe0\xa4\xa4\xe0\xa4\xbe\xe0\xa4\xb2\xe0\xa4\xbf\xe0\xa4\x95\xe0\xa4\xbe',
+'Cannot be empty': '\xe0\xa4\x96\xe0\xa4\xbe\xe0\xa4\xb2\xe0\xa5\x80 \xe0\xa4\xa8\xe0\xa4\xb9\xe0\xa5\x80\xe0\xa4\x82 \xe0\xa4\xb9\xe0\xa5\x8b \xe0\xa4\xb8\xe0\xa4\x95\xe0\xa4\xa4\xe0\xa4\xbe',
+'Change Password': '\xe0\xa4\xaa\xe0\xa4\xbe\xe0\xa4\xb8\xe0\xa4\xb5\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa1 \xe0\xa4\xac\xe0\xa4\xa6\xe0\xa4\xb2\xe0\xa5\x87\xe0\xa4\x82',
+'Check to delete': '\xe0\xa4\xb9\xe0\xa4\x9f\xe0\xa4\xbe\xe0\xa4\xa8\xe0\xa5\x87 \xe0\xa4\x95\xe0\xa5\x87 \xe0\xa4\xb2\xe0\xa4\xbf\xe0\xa4\x8f \xe0\xa4\x9a\xe0\xa5\x81\xe0\xa4\xa8\xe0\xa5\x87\xe0\xa4\x82',
+'Controller': 'Controller',
+'Copyright': 'Copyright',
+'Current request': '\xe0\xa4\xb5\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa4\xae\xe0\xa4\xbe\xe0\xa4\xa8 \xe0\xa4\x85\xe0\xa4\xa8\xe0\xa5\x81\xe0\xa4\xb0\xe0\xa5\x8b\xe0\xa4\xa7',
+'Current response': '\xe0\xa4\xb5\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa4\xae\xe0\xa4\xbe\xe0\xa4\xa8 \xe0\xa4\xaa\xe0\xa5\x8d\xe0\xa4\xb0\xe0\xa4\xa4\xe0\xa4\xbf\xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xb0\xe0\xa4\xbf\xe0\xa4\xaf\xe0\xa4\xbe',
+'Current session': '\xe0\xa4\xb5\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa4\xae\xe0\xa4\xbe\xe0\xa4\xa8 \xe0\xa4\xb8\xe0\xa5\x87\xe0\xa4\xb6\xe0\xa4\xa8',
+'DB Model': 'DB Model',
+'Database': 'Database',
+'Delete:': '\xe0\xa4\xae\xe0\xa4\xbf\xe0\xa4\x9f\xe0\xa4\xbe\xe0\xa4\xa8\xe0\xa4\xbe:',
+'Edit': 'Edit',
+'Edit Profile': '\xe0\xa4\xaa\xe0\xa5\x8d\xe0\xa4\xb0\xe0\xa5\x8b\xe0\xa4\xab\xe0\xa4\xbc\xe0\xa4\xbe\xe0\xa4\x87\xe0\xa4\xb2 \xe0\xa4\xb8\xe0\xa4\x82\xe0\xa4\xaa\xe0\xa4\xbe\xe0\xa4\xa6\xe0\xa4\xbf\xe0\xa4\xa4 \xe0\xa4\x95\xe0\xa4\xb0\xe0\xa5\x87\xe0\xa4\x82',
+'Edit This App': 'Edit This App',
+'Edit current record': '\xe0\xa4\xb5\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa4\xae\xe0\xa4\xbe\xe0\xa4\xa8 \xe0\xa4\xb0\xe0\xa5\x87\xe0\xa4\x95\xe0\xa5\x89\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa1 \xe0\xa4\xb8\xe0\xa4\x82\xe0\xa4\xaa\xe0\xa4\xbe\xe0\xa4\xa6\xe0\xa4\xbf\xe0\xa4\xa4 \xe0\xa4\x95\xe0\xa4\xb0\xe0\xa5\x87\xe0\xa4\x82 ',
+'Hello World': 'Hello World',
+'Hello from MyApp': 'Hello from MyApp',
+'Import/Export': '\xe0\xa4\x86\xe0\xa4\xaf\xe0\xa4\xbe\xe0\xa4\xa4 / \xe0\xa4\xa8\xe0\xa4\xbf\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xaf\xe0\xa4\xbe\xe0\xa4\xa4',
+'Index': 'Index',
+'Internal State': '\xe0\xa4\x86\xe0\xa4\x82\xe0\xa4\xa4\xe0\xa4\xb0\xe0\xa4\xbf\xe0\xa4\x95  \xe0\xa4\xb8\xe0\xa5\x8d\xe0\xa4\xa5\xe0\xa4\xbf\xe0\xa4\xa4\xe0\xa4\xbf',
+'Invalid Query': '\xe0\xa4\x85\xe0\xa4\xae\xe0\xa4\xbe\xe0\xa4\xa8\xe0\xa5\x8d\xe0\xa4\xaf  \xe0\xa4\xaa\xe0\xa5\x8d\xe0\xa4\xb0\xe0\xa4\xb6\xe0\xa5\x8d\xe0\xa4\xa8',
+'Layout': 'Layout',
+'Login': '\xe0\xa4\xb2\xe0\xa5\x89\xe0\xa4\x97 \xe0\xa4\x87\xe0\xa4\xa8',
+'Logout': '\xe0\xa4\xb2\xe0\xa5\x89\xe0\xa4\x97 \xe0\xa4\x86\xe0\xa4\x89\xe0\xa4\x9f',
+'Lost Password': '\xe0\xa4\xaa\xe0\xa4\xbe\xe0\xa4\xb8\xe0\xa4\xb5\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa1 \xe0\xa4\x96\xe0\xa5\x8b \xe0\xa4\x97\xe0\xa4\xaf\xe0\xa4\xbe',
+'Main Menu': 'Main Menu',
+'Menu Model': 'Menu Model',
+'New Record': '\xe0\xa4\xa8\xe0\xa4\xaf\xe0\xa4\xbe \xe0\xa4\xb0\xe0\xa5\x87\xe0\xa4\x95\xe0\xa5\x89\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa1',
+'No databases in this application': '\xe0\xa4\x87\xe0\xa4\xb8  \xe0\xa4\x85\xe0\xa4\xa8\xe0\xa5\x81\xe0\xa4\xaa\xe0\xa5\x8d\xe0\xa4\xb0\xe0\xa4\xaf\xe0\xa5\x8b\xe0\xa4\x97 \xe0\xa4\xae\xe0\xa5\x87\xe0\xa4\x82 \xe0\xa4\x95\xe0\xa5\x8b\xe0\xa4\x88 \xe0\xa4\xa1\xe0\xa5\x87\xe0\xa4\x9f\xe0\xa4\xbe\xe0\xa4\xac\xe0\xa5\x87\xe0\xa4\xb8 \xe0\xa4\xa8\xe0\xa4\xb9\xe0\xa5\x80\xe0\xa4\x82 \xe0\xa4\xb9\xe0\xa5\x88\xe0\xa4\x82',
+'Powered by': 'Powered by',
+'Query:': '\xe0\xa4\xaa\xe0\xa5\x8d\xe0\xa4\xb0\xe0\xa4\xb6\xe0\xa5\x8d\xe0\xa4\xa8:',
+'Register': '\xe0\xa4\xaa\xe0\xa4\x82\xe0\xa4\x9c\xe0\xa5\x80\xe0\xa4\x95\xe0\xa5\x83\xe0\xa4\xa4 (\xe0\xa4\xb0\xe0\xa4\x9c\xe0\xa4\xbf\xe0\xa4\xb8\xe0\xa5\x8d\xe0\xa4\x9f\xe0\xa4\xb0) \xe0\xa4\x95\xe0\xa4\xb0\xe0\xa4\xa8\xe0\xa4\xbe ',
+'Rows in table': '\xe0\xa4\xa4\xe0\xa4\xbe\xe0\xa4\xb2\xe0\xa4\xbf\xe0\xa4\x95\xe0\xa4\xbe \xe0\xa4\xae\xe0\xa5\x87\xe0\xa4\x82 \xe0\xa4\xaa\xe0\xa4\x82\xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa4\xbf\xe0\xa4\xaf\xe0\xa4\xbe\xe0\xa4\x81 ',
+'Rows selected': '\xe0\xa4\x9a\xe0\xa4\xaf\xe0\xa4\xa8\xe0\xa4\xbf\xe0\xa4\xa4 (\xe0\xa4\x9a\xe0\xa5\x81\xe0\xa4\xa8\xe0\xa5\x87 \xe0\xa4\x97\xe0\xa4\xaf\xe0\xa5\x87) \xe0\xa4\xaa\xe0\xa4\x82\xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa4\xbf\xe0\xa4\xaf\xe0\xa4\xbe\xe0\xa4\x81 ',
+'Stylesheet': 'Stylesheet',
+'Sure you want to delete this object?': '\xe0\xa4\xb8\xe0\xa5\x81\xe0\xa4\xa8\xe0\xa4\xbf\xe0\xa4\xb6\xe0\xa5\x8d\xe0\xa4\x9a\xe0\xa4\xbf\xe0\xa4\xa4 \xe0\xa4\xb9\xe0\xa5\x88\xe0\xa4\x82 \xe0\xa4\x95\xe0\xa4\xbf \xe0\xa4\x86\xe0\xa4\xaa \xe0\xa4\x87\xe0\xa4\xb8 \xe0\xa4\xb5\xe0\xa4\xb8\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa5\x81 \xe0\xa4\x95\xe0\xa5\x8b \xe0\xa4\xb9\xe0\xa4\x9f\xe0\xa4\xbe\xe0\xa4\xa8\xe0\xa4\xbe \xe0\xa4\x9a\xe0\xa4\xbe\xe0\xa4\xb9\xe0\xa4\xa4\xe0\xa5\x87 \xe0\xa4\xb9\xe0\xa5\x88\xe0\xa4\x82?',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': 'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.',
+'Update:': '\xe0\xa4\x85\xe0\xa4\xa6\xe0\xa5\x8d\xe0\xa4\xaf\xe0\xa4\xa4\xe0\xa4\xa8 \xe0\xa4\x95\xe0\xa4\xb0\xe0\xa4\xa8\xe0\xa4\xbe:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.',
+'View': 'View',
+'Welcome %s': 'Welcome %s',
+'Welcome to web2py': '\xe0\xa4\xb5\xe0\xa5\x87\xe0\xa4\xac\xe0\xa5\xa8\xe0\xa4\xaa\xe0\xa4\xbe\xe0\xa4\x87 (web2py)  \xe0\xa4\xae\xe0\xa5\x87\xe0\xa4\x82 \xe0\xa4\x86\xe0\xa4\xaa\xe0\xa4\x95\xe0\xa4\xbe \xe0\xa4\xb8\xe0\xa5\x8d\xe0\xa4\xb5\xe0\xa4\xbe\xe0\xa4\x97\xe0\xa4\xa4 \xe0\xa4\xb9\xe0\xa5\x88',
+'appadmin is disabled because insecure channel': '\xe0\xa4\x85\xe0\xa4\xaa \xe0\xa4\x86\xe0\xa4\xa1\xe0\xa4\xae\xe0\xa4\xbf\xe0\xa4\xa8 (appadmin) \xe0\xa4\x85\xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xb7\xe0\xa4\xae \xe0\xa4\xb9\xe0\xa5\x88 \xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xaf\xe0\xa5\x8b\xe0\xa4\x82\xe0\xa4\x95\xe0\xa4\xbf \xe0\xa4\x85\xe0\xa4\xb8\xe0\xa5\x81\xe0\xa4\xb0\xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xb7\xe0\xa4\xbf\xe0\xa4\xa4 \xe0\xa4\x9a\xe0\xa5\x88\xe0\xa4\xa8\xe0\xa4\xb2',
+'cache': 'cache',
+'change password': 'change password',
+'Online examples': '\xe0\xa4\x91\xe0\xa4\xa8\xe0\xa4\xb2\xe0\xa4\xbe\xe0\xa4\x87\xe0\xa4\xa8 \xe0\xa4\x89\xe0\xa4\xa6\xe0\xa4\xbe\xe0\xa4\xb9\xe0\xa4\xb0\xe0\xa4\xa3 \xe0\xa4\x95\xe0\xa5\x87 \xe0\xa4\xb2\xe0\xa4\xbf\xe0\xa4\x8f \xe0\xa4\xaf\xe0\xa4\xb9\xe0\xa4\xbe\xe0\xa4\x81 \xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xb2\xe0\xa4\xbf\xe0\xa4\x95 \xe0\xa4\x95\xe0\xa4\xb0\xe0\xa5\x87\xe0\xa4\x82',
+'Administrative interface': '\xe0\xa4\xaa\xe0\xa5\x8d\xe0\xa4\xb0\xe0\xa4\xb6\xe0\xa4\xbe\xe0\xa4\xb8\xe0\xa4\xa8\xe0\xa4\xbf\xe0\xa4\x95 \xe0\xa4\x87\xe0\xa4\x82\xe0\xa4\x9f\xe0\xa4\xb0\xe0\xa4\xab\xe0\xa5\x87\xe0\xa4\xb8 \xe0\xa4\x95\xe0\xa5\x87 \xe0\xa4\xb2\xe0\xa4\xbf\xe0\xa4\x8f \xe0\xa4\xaf\xe0\xa4\xb9\xe0\xa4\xbe\xe0\xa4\x81 \xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xb2\xe0\xa4\xbf\xe0\xa4\x95 \xe0\xa4\x95\xe0\xa4\xb0\xe0\xa5\x87\xe0\xa4\x82',
+'customize me!': '\xe0\xa4\xae\xe0\xa5\x81\xe0\xa4\x9d\xe0\xa5\x87 \xe0\xa4\x85\xe0\xa4\xa8\xe0\xa5\x81\xe0\xa4\x95\xe0\xa5\x82\xe0\xa4\xb2\xe0\xa4\xbf\xe0\xa4\xa4 (\xe0\xa4\x95\xe0\xa4\xb8\xe0\xa5\x8d\xe0\xa4\x9f\xe0\xa4\xae\xe0\xa4\xbe\xe0\xa4\x87\xe0\xa4\x9c\xe0\xa4\xbc) \xe0\xa4\x95\xe0\xa4\xb0\xe0\xa5\x87\xe0\xa4\x82!',
+'data uploaded': '\xe0\xa4\xa1\xe0\xa4\xbe\xe0\xa4\x9f\xe0\xa4\xbe \xe0\xa4\x85\xe0\xa4\xaa\xe0\xa4\xb2\xe0\xa5\x8b\xe0\xa4\xa1 \xe0\xa4\xb8\xe0\xa4\xae\xe0\xa5\x8d\xe0\xa4\xaa\xe0\xa4\xa8\xe0\xa5\x8d\xe0\xa4\xa8 ',
+'database': '\xe0\xa4\xa1\xe0\xa5\x87\xe0\xa4\x9f\xe0\xa4\xbe\xe0\xa4\xac\xe0\xa5\x87\xe0\xa4\xb8',
+'database %s select': '\xe0\xa4\xa1\xe0\xa5\x87\xe0\xa4\x9f\xe0\xa4\xbe\xe0\xa4\xac\xe0\xa5\x87\xe0\xa4\xb8  %s \xe0\xa4\x9a\xe0\xa5\x81\xe0\xa4\xa8\xe0\xa5\x80 \xe0\xa4\xb9\xe0\xa5\x81\xe0\xa4\x88',
+'db': 'db',
+'design': '\xe0\xa4\xb0\xe0\xa4\x9a\xe0\xa4\xa8\xe0\xa4\xbe \xe0\xa4\x95\xe0\xa4\xb0\xe0\xa5\x87\xe0\xa4\x82',
+'done!': '\xe0\xa4\xb9\xe0\xa5\x8b \xe0\xa4\x97\xe0\xa4\xaf\xe0\xa4\xbe!',
+'edit profile': 'edit profile',
+'export as csv file': 'csv \xe0\xa4\xab\xe0\xa4\xbc\xe0\xa4\xbe\xe0\xa4\x87\xe0\xa4\xb2 \xe0\xa4\x95\xe0\xa5\x87 \xe0\xa4\xb0\xe0\xa5\x82\xe0\xa4\xaa \xe0\xa4\xae\xe0\xa5\x87\xe0\xa4\x82 \xe0\xa4\xa8\xe0\xa4\xbf\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xaf\xe0\xa4\xbe\xe0\xa4\xa4',
+'insert new': '\xe0\xa4\xa8\xe0\xa4\xaf\xe0\xa4\xbe \xe0\xa4\xa1\xe0\xa4\xbe\xe0\xa4\xb2\xe0\xa5\x87\xe0\xa4\x82',
+'insert new %s': '\xe0\xa4\xa8\xe0\xa4\xaf\xe0\xa4\xbe   %s  \xe0\xa4\xa1\xe0\xa4\xbe\xe0\xa4\xb2\xe0\xa5\x87\xe0\xa4\x82',
+'invalid request': '\xe0\xa4\x85\xe0\xa4\xb5\xe0\xa5\x88\xe0\xa4\xa7 \xe0\xa4\x85\xe0\xa4\xa8\xe0\xa5\x81\xe0\xa4\xb0\xe0\xa5\x8b\xe0\xa4\xa7',
+'login': 'login',
+'logout': 'logout',
+'new record inserted': '\xe0\xa4\xa8\xe0\xa4\xaf\xe0\xa4\xbe \xe0\xa4\xb0\xe0\xa5\x87\xe0\xa4\x95\xe0\xa5\x89\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa1 \xe0\xa4\xa1\xe0\xa4\xbe\xe0\xa4\xb2\xe0\xa4\xbe',
+'next 100 rows': '\xe0\xa4\x85\xe0\xa4\x97\xe0\xa4\xb2\xe0\xa5\x87 100 \xe0\xa4\xaa\xe0\xa4\x82\xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa4\xbf\xe0\xa4\xaf\xe0\xa4\xbe\xe0\xa4\x81',
+'or import from csv file': '\xe0\xa4\xaf\xe0\xa4\xbe  csv \xe0\xa4\xab\xe0\xa4\xbc\xe0\xa4\xbe\xe0\xa4\x87\xe0\xa4\xb2 \xe0\xa4\xb8\xe0\xa5\x87 \xe0\xa4\x86\xe0\xa4\xaf\xe0\xa4\xbe\xe0\xa4\xa4',
+'previous 100 rows': '\xe0\xa4\xaa\xe0\xa4\xbf\xe0\xa4\x9b\xe0\xa4\xb2\xe0\xa5\x87 100 \xe0\xa4\xaa\xe0\xa4\x82\xe0\xa4\x95\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa4\xbf\xe0\xa4\xaf\xe0\xa4\xbe\xe0\xa4\x81',
+'record': 'record',
+'record does not exist': '\xe0\xa4\xb0\xe0\xa4\xbf\xe0\xa4\x95\xe0\xa5\x89\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa1 \xe0\xa4\xae\xe0\xa5\x8c\xe0\xa4\x9c\xe0\xa5\x82\xe0\xa4\xa6 \xe0\xa4\xa8\xe0\xa4\xb9\xe0\xa5\x80\xe0\xa4\x82 \xe0\xa4\xb9\xe0\xa5\x88',
+'record id': '\xe0\xa4\xb0\xe0\xa4\xbf\xe0\xa4\x95\xe0\xa5\x89\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa1 \xe0\xa4\xaa\xe0\xa4\xb9\xe0\xa4\x9a\xe0\xa4\xbe\xe0\xa4\xa8\xe0\xa4\x95\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa4\xe0\xa4\xbe (\xe0\xa4\x86\xe0\xa4\x88\xe0\xa4\xa1\xe0\xa5\x80)',
+'register': 'register',
+'selected': '\xe0\xa4\x9a\xe0\xa5\x81\xe0\xa4\xa8\xe0\xa4\xbe \xe0\xa4\xb9\xe0\xa5\x81\xe0\xa4\x86',
+'state': '\xe0\xa4\xb8\xe0\xa5\x8d\xe0\xa4\xa5\xe0\xa4\xbf\xe0\xa4\xa4\xe0\xa4\xbf',
+'table': '\xe0\xa4\xa4\xe0\xa4\xbe\xe0\xa4\xb2\xe0\xa4\xbf\xe0\xa4\x95\xe0\xa4\xbe',
+'unable to parse csv file': 'csv \xe0\xa4\xab\xe0\xa4\xbc\xe0\xa4\xbe\xe0\xa4\x87\xe0\xa4\xb2 \xe0\xa4\xaa\xe0\xa4\xbe\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xb8 \xe0\xa4\x95\xe0\xa4\xb0\xe0\xa4\xa8\xe0\xa5\x87 \xe0\xa4\xae\xe0\xa5\x87\xe0\xa4\x82 \xe0\xa4\x85\xe0\xa4\xb8\xe0\xa4\xae\xe0\xa4\xb0\xe0\xa5\x8d\xe0\xa4\xa5',
+}

ADDED   applications/welcome/languages/hu-hu.py
Index: applications/welcome/languages/hu-hu.py
==================================================================
--- /dev/null
+++ applications/welcome/languages/hu-hu.py
@@ -0,0 +1,93 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN',
+'%Y-%m-%d': '%Y.%m.%d.',
+'%Y-%m-%d %H:%M:%S': '%Y.%m.%d. %H:%M:%S',
+'%s rows deleted': '%s sorok t\xc3\xb6rl\xc5\x91dtek',
+'%s rows updated': '%s sorok friss\xc3\xadt\xc5\x91dtek',
+'Available databases and tables': 'El\xc3\xa9rhet\xc5\x91 adatb\xc3\xa1zisok \xc3\xa9s t\xc3\xa1bl\xc3\xa1k',
+'Cannot be empty': 'Nem lehet \xc3\xbcres',
+'Check to delete': 'T\xc3\xb6rl\xc3\xa9shez v\xc3\xa1laszd ki',
+'Client IP': 'Client IP',
+'Controller': 'Controller',
+'Copyright': 'Copyright',
+'Current request': 'Jelenlegi lek\xc3\xa9rdez\xc3\xa9s',
+'Current response': 'Jelenlegi v\xc3\xa1lasz',
+'Current session': 'Jelenlegi folyamat',
+'DB Model': 'DB Model',
+'Database': 'Adatb\xc3\xa1zis',
+'Delete:': 'T\xc3\xb6r\xc3\xb6l:',
+'Description': 'Description',
+'E-mail': 'E-mail',
+'Edit': 'Szerkeszt',
+'Edit This App': 'Alkalmaz\xc3\xa1st szerkeszt',
+'Edit current record': 'Aktu\xc3\xa1lis bejegyz\xc3\xa9s szerkeszt\xc3\xa9se',
+'First name': 'First name',
+'Group ID': 'Group ID',
+'Hello World': 'Hello Vil\xc3\xa1g',
+'Import/Export': 'Import/Export',
+'Index': 'Index',
+'Internal State': 'Internal State',
+'Invalid Query': 'Hib\xc3\xa1s lek\xc3\xa9rdez\xc3\xa9s',
+'Invalid email': 'Invalid email',
+'Last name': 'Last name',
+'Layout': 'Szerkezet',
+'Main Menu': 'F\xc5\x91men\xc3\xbc',
+'Menu Model': 'Men\xc3\xbc model',
+'Name': 'Name',
+'New Record': '\xc3\x9aj bejegyz\xc3\xa9s',
+'No databases in this application': 'Nincs adatb\xc3\xa1zis ebben az alkalmaz\xc3\xa1sban',
+'Origin': 'Origin',
+'Password': 'Password',
+'Powered by': 'Powered by',
+'Query:': 'Lek\xc3\xa9rdez\xc3\xa9s:',
+'Record ID': 'Record ID',
+'Registration key': 'Registration key',
+'Reset Password key': 'Reset Password key',
+'Role': 'Role',
+'Rows in table': 'Sorok a t\xc3\xa1bl\xc3\xa1ban',
+'Rows selected': 'Kiv\xc3\xa1lasztott sorok',
+'Stylesheet': 'Stylesheet',
+'Sure you want to delete this object?': 'Biztos t\xc3\xb6rli ezt az objektumot?',
+'Table name': 'Table name',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': 'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.',
+'Timestamp': 'Timestamp',
+'Update:': 'Friss\xc3\xadt:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.',
+'User ID': 'User ID',
+'View': 'N\xc3\xa9zet',
+'Welcome %s': 'Welcome %s',
+'Welcome to web2py': 'Isten hozott a web2py-ban',
+'appadmin is disabled because insecure channel': 'az appadmin a biztons\xc3\xa1gtalan csatorna miatt letiltva',
+'cache': 'gyors\xc3\xadt\xc3\xb3t\xc3\xa1r',
+'change password': 'jelsz\xc3\xb3 megv\xc3\xa1ltoztat\xc3\xa1sa',
+'Online examples': 'online p\xc3\xa9ld\xc3\xa1k\xc3\xa9rt kattints ide',
+'Administrative interface': 'az adminisztr\xc3\xa1ci\xc3\xb3s fel\xc3\xbclet\xc3\xa9rt kattints ide',
+'customize me!': 'v\xc3\xa1ltoztass meg!',
+'data uploaded': 'adat felt\xc3\xb6ltve',
+'database': 'adatb\xc3\xa1zis',
+'database %s select': 'adatb\xc3\xa1zis %s kiv\xc3\xa1laszt\xc3\xa1s',
+'db': 'db',
+'design': 'design',
+'done!': 'k\xc3\xa9sz!',
+'edit profile': 'profil szerkeszt\xc3\xa9se',
+'export as csv file': 'export\xc3\xa1l csv f\xc3\xa1jlba',
+'insert new': '\xc3\xbaj beilleszt\xc3\xa9se',
+'insert new %s': '\xc3\xbaj beilleszt\xc3\xa9se %s',
+'invalid request': 'hib\xc3\xa1s k\xc3\xa9r\xc3\xa9s',
+'login': 'bel\xc3\xa9p',
+'logout': 'kil\xc3\xa9p',
+'lost password': 'elveszett jelsz\xc3\xb3',
+'new record inserted': '\xc3\xbaj bejegyz\xc3\xa9s felv\xc3\xa9ve',
+'next 100 rows': 'k\xc3\xb6vetkez\xc5\x91 100 sor',
+'or import from csv file': 'vagy bet\xc3\xb6lt\xc3\xa9s csv f\xc3\xa1jlb\xc3\xb3l',
+'previous 100 rows': 'el\xc5\x91z\xc5\x91 100 sor',
+'record': 'bejegyz\xc3\xa9s',
+'record does not exist': 'bejegyz\xc3\xa9s nem l\xc3\xa9tezik',
+'record id': 'bejegyz\xc3\xa9s id',
+'register': 'regisztr\xc3\xa1ci\xc3\xb3',
+'selected': 'kiv\xc3\xa1lasztott',
+'state': '\xc3\xa1llapot',
+'table': 't\xc3\xa1bla',
+'unable to parse csv file': 'nem lehet a csv f\xc3\xa1jlt beolvasni',
+}

ADDED   applications/welcome/languages/hu.py
Index: applications/welcome/languages/hu.py
==================================================================
--- /dev/null
+++ applications/welcome/languages/hu.py
@@ -0,0 +1,93 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN',
+'%Y-%m-%d': '%Y.%m.%d.',
+'%Y-%m-%d %H:%M:%S': '%Y.%m.%d. %H:%M:%S',
+'%s rows deleted': '%s sorok t\xc3\xb6rl\xc5\x91dtek',
+'%s rows updated': '%s sorok friss\xc3\xadt\xc5\x91dtek',
+'Available databases and tables': 'El\xc3\xa9rhet\xc5\x91 adatb\xc3\xa1zisok \xc3\xa9s t\xc3\xa1bl\xc3\xa1k',
+'Cannot be empty': 'Nem lehet \xc3\xbcres',
+'Check to delete': 'T\xc3\xb6rl\xc3\xa9shez v\xc3\xa1laszd ki',
+'Client IP': 'Client IP',
+'Controller': 'Controller',
+'Copyright': 'Copyright',
+'Current request': 'Jelenlegi lek\xc3\xa9rdez\xc3\xa9s',
+'Current response': 'Jelenlegi v\xc3\xa1lasz',
+'Current session': 'Jelenlegi folyamat',
+'DB Model': 'DB Model',
+'Database': 'Adatb\xc3\xa1zis',
+'Delete:': 'T\xc3\xb6r\xc3\xb6l:',
+'Description': 'Description',
+'E-mail': 'E-mail',
+'Edit': 'Szerkeszt',
+'Edit This App': 'Alkalmaz\xc3\xa1st szerkeszt',
+'Edit current record': 'Aktu\xc3\xa1lis bejegyz\xc3\xa9s szerkeszt\xc3\xa9se',
+'First name': 'First name',
+'Group ID': 'Group ID',
+'Hello World': 'Hello Vil\xc3\xa1g',
+'Import/Export': 'Import/Export',
+'Index': 'Index',
+'Internal State': 'Internal State',
+'Invalid Query': 'Hib\xc3\xa1s lek\xc3\xa9rdez\xc3\xa9s',
+'Invalid email': 'Invalid email',
+'Last name': 'Last name',
+'Layout': 'Szerkezet',
+'Main Menu': 'F\xc5\x91men\xc3\xbc',
+'Menu Model': 'Men\xc3\xbc model',
+'Name': 'Name',
+'New Record': '\xc3\x9aj bejegyz\xc3\xa9s',
+'No databases in this application': 'Nincs adatb\xc3\xa1zis ebben az alkalmaz\xc3\xa1sban',
+'Origin': 'Origin',
+'Password': 'Password',
+'Powered by': 'Powered by',
+'Query:': 'Lek\xc3\xa9rdez\xc3\xa9s:',
+'Record ID': 'Record ID',
+'Registration key': 'Registration key',
+'Reset Password key': 'Reset Password key',
+'Role': 'Role',
+'Rows in table': 'Sorok a t\xc3\xa1bl\xc3\xa1ban',
+'Rows selected': 'Kiv\xc3\xa1lasztott sorok',
+'Stylesheet': 'Stylesheet',
+'Sure you want to delete this object?': 'Biztos t\xc3\xb6rli ezt az objektumot?',
+'Table name': 'Table name',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': 'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.',
+'Timestamp': 'Timestamp',
+'Update:': 'Friss\xc3\xadt:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.',
+'User ID': 'User ID',
+'View': 'N\xc3\xa9zet',
+'Welcome %s': 'Welcome %s',
+'Welcome to web2py': 'Isten hozott a web2py-ban',
+'appadmin is disabled because insecure channel': 'az appadmin a biztons\xc3\xa1gtalan csatorna miatt letiltva',
+'cache': 'gyors\xc3\xadt\xc3\xb3t\xc3\xa1r',
+'change password': 'jelsz\xc3\xb3 megv\xc3\xa1ltoztat\xc3\xa1sa',
+'Online examples': 'online p\xc3\xa9ld\xc3\xa1k\xc3\xa9rt kattints ide',
+'Administrative interface': 'az adminisztr\xc3\xa1ci\xc3\xb3s fel\xc3\xbclet\xc3\xa9rt kattints ide',
+'customize me!': 'v\xc3\xa1ltoztass meg!',
+'data uploaded': 'adat felt\xc3\xb6ltve',
+'database': 'adatb\xc3\xa1zis',
+'database %s select': 'adatb\xc3\xa1zis %s kiv\xc3\xa1laszt\xc3\xa1s',
+'db': 'db',
+'design': 'design',
+'done!': 'k\xc3\xa9sz!',
+'edit profile': 'profil szerkeszt\xc3\xa9se',
+'export as csv file': 'export\xc3\xa1l csv f\xc3\xa1jlba',
+'insert new': '\xc3\xbaj beilleszt\xc3\xa9se',
+'insert new %s': '\xc3\xbaj beilleszt\xc3\xa9se %s',
+'invalid request': 'hib\xc3\xa1s k\xc3\xa9r\xc3\xa9s',
+'login': 'bel\xc3\xa9p',
+'logout': 'kil\xc3\xa9p',
+'lost password': 'elveszett jelsz\xc3\xb3',
+'new record inserted': '\xc3\xbaj bejegyz\xc3\xa9s felv\xc3\xa9ve',
+'next 100 rows': 'k\xc3\xb6vetkez\xc5\x91 100 sor',
+'or import from csv file': 'vagy bet\xc3\xb6lt\xc3\xa9s csv f\xc3\xa1jlb\xc3\xb3l',
+'previous 100 rows': 'el\xc5\x91z\xc5\x91 100 sor',
+'record': 'bejegyz\xc3\xa9s',
+'record does not exist': 'bejegyz\xc3\xa9s nem l\xc3\xa9tezik',
+'record id': 'bejegyz\xc3\xa9s id',
+'register': 'regisztr\xc3\xa1ci\xc3\xb3',
+'selected': 'kiv\xc3\xa1lasztott',
+'state': '\xc3\xa1llapot',
+'table': 't\xc3\xa1bla',
+'unable to parse csv file': 'nem lehet a csv f\xc3\xa1jlt beolvasni',
+}

ADDED   applications/welcome/languages/it-it.py
Index: applications/welcome/languages/it-it.py
==================================================================
--- /dev/null
+++ applications/welcome/languages/it-it.py
@@ -0,0 +1,104 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"update" è un\'espressione opzionale come "campo1=\'nuovo valore\'". Non si può fare "update" o "delete" dei risultati di un JOIN ',
+'%Y-%m-%d': '%d/%m/%Y',
+'%Y-%m-%d %H:%M:%S': '%d/%m/%Y %H:%M:%S',
+'%s rows deleted': '%s righe ("record") cancellate',
+'%s rows updated': '%s righe ("record") modificate',
+'Available databases and tables': 'Database e tabelle disponibili',
+'Cannot be empty': 'Non può essere vuoto',
+'Check to delete': 'Seleziona per cancellare',
+'Client IP': 'Client IP',
+'Controller': 'Controller',
+'Copyright': 'Copyright',
+'Current request': 'Richiesta (request) corrente',
+'Current response': 'Risposta (response) corrente',
+'Current session': 'Sessione (session) corrente',
+'DB Model': 'Modello di DB',
+'Database': 'Database',
+'Delete:': 'Cancella:',
+'Description': 'Descrizione',
+'E-mail': 'E-mail',
+'Edit': 'Modifica',
+'Edit This App': 'Modifica questa applicazione',
+'Edit current record': 'Modifica record corrente',
+'First name': 'Nome',
+'Group ID': 'ID Gruppo',
+'Hello World': 'Salve Mondo',
+'Hello World in a flash!': 'Salve Mondo in un flash!',
+'Import/Export': 'Importa/Esporta',
+'Index': 'Indice',
+'Internal State': 'Stato interno',
+'Invalid Query': 'Richiesta (query) non valida',
+'Invalid email': 'Email non valida',
+'Last name': 'Cognome',
+'Layout': 'Layout',
+'Main Menu': 'Menu principale',
+'Menu Model': 'Menu Modelli',
+'Name': 'Nome',
+'New Record': 'Nuovo elemento (record)',
+'No databases in this application': 'Nessun database presente in questa applicazione',
+'Origin': 'Origine',
+'Password': 'Password',
+'Powered by': 'Powered by',
+'Query:': 'Richiesta (query):',
+'Record ID': 'Record ID',
+'Registration key': 'Chiave di Registazione',
+'Reset Password key': 'Resetta chiave Password ',
+'Role': 'Ruolo',
+'Rows in table': 'Righe nella tabella',
+'Rows selected': 'Righe selezionate',
+'Stylesheet': 'Foglio di stile (stylesheet)',
+'Sure you want to delete this object?': 'Vuoi veramente cancellare questo oggetto?',
+'Table name': 'Nome tabella',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': 'La richiesta (query) è una condizione come ad esempio  "db.tabella1.campo1==\'valore\'". Una condizione come "db.tabella1.campo1==db.tabella2.campo2" produce un "JOIN" SQL.',
+'The output of the file is a dictionary that was rendered by the view': 'L\'output del file è un "dictionary" che è stato visualizzato dalla vista',
+'This is a copy of the scaffolding application': "Questa è una copia dell'applicazione di base (scaffold)",
+'Timestamp': 'Ora (timestamp)',
+'Update:': 'Aggiorna:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Per costruire richieste (query) più complesse si usano (...)&(...) come "e" (AND), (...)|(...) come "o" (OR), e ~(...) come negazione (NOT).',
+'User ID': 'ID Utente',
+'View': 'Vista',
+'Welcome %s': 'Benvenuto %s',
+'Welcome to web2py': 'Benvenuto su web2py',
+'Which called the function': 'che ha chiamato la funzione',
+'You are successfully running web2py': 'Stai eseguendo web2py con successo',
+'You can modify this application and adapt it to your needs': 'Puoi modificare questa applicazione adattandola alle tue necessità',
+'You visited the url': "Hai visitato l'URL",
+'appadmin is disabled because insecure channel': 'Amministrazione (appadmin) disabilitata: comunicazione non sicura',
+'cache': 'cache',
+'change password': 'Cambia password',
+'Online examples': 'Vedere gli esempi',
+'Administrative interface': "Interfaccia amministrativa",
+'customize me!': 'Personalizzami!',
+'data uploaded': 'dati caricati',
+'database': 'database',
+'database %s select': 'database %s select',
+'db': 'db',
+'design': 'progetta',
+'Documentation': 'Documentazione',
+'done!': 'fatto!',
+'edit profile': 'modifica profilo',
+'export as csv file': 'esporta come file CSV',
+'hello world': 'salve mondo',
+'insert new': 'inserisci nuovo',
+'insert new %s': 'inserisci nuovo %s',
+'invalid request': 'richiesta non valida',
+'located in the file': 'presente nel file',
+'login': 'accesso',
+'logout': 'uscita',
+'lost password?': 'dimenticato la password?',
+'new record inserted': 'nuovo record inserito',
+'next 100 rows': 'prossime 100 righe',
+'not authorized': 'non autorizzato',
+'or import from csv file': 'oppure importa da file CSV',
+'previous 100 rows': '100 righe precedenti',
+'record': 'record',
+'record does not exist': 'il record non esiste',
+'record id': 'record id',
+'register': 'registrazione',
+'selected': 'selezionato',
+'state': 'stato',
+'table': 'tabella',
+'unable to parse csv file': 'non riesco a decodificare questo file CSV',
+}

ADDED   applications/welcome/languages/it.py
Index: applications/welcome/languages/it.py
==================================================================
--- /dev/null
+++ applications/welcome/languages/it.py
@@ -0,0 +1,104 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"update" è un\'espressione opzionale come "campo1=\'nuovo valore\'". Non si può fare "update" o "delete" dei risultati di un JOIN ',
+'%Y-%m-%d': '%d/%m/%Y',
+'%Y-%m-%d %H:%M:%S': '%d/%m/%Y %H:%M:%S',
+'%s rows deleted': '%s righe ("record") cancellate',
+'%s rows updated': '%s righe ("record") modificate',
+'Available databases and tables': 'Database e tabelle disponibili',
+'Cannot be empty': 'Non può essere vuoto',
+'Check to delete': 'Seleziona per cancellare',
+'Client IP': 'Client IP',
+'Controller': 'Controller',
+'Copyright': 'Copyright',
+'Current request': 'Richiesta (request) corrente',
+'Current response': 'Risposta (response) corrente',
+'Current session': 'Sessione (session) corrente',
+'DB Model': 'Modello di DB',
+'Database': 'Database',
+'Delete:': 'Cancella:',
+'Description': 'Descrizione',
+'E-mail': 'E-mail',
+'Edit': 'Modifica',
+'Edit This App': 'Modifica questa applicazione',
+'Edit current record': 'Modifica record corrente',
+'First name': 'Nome',
+'Group ID': 'ID Gruppo',
+'Hello World': 'Salve Mondo',
+'Hello World in a flash!': 'Salve Mondo in un flash!',
+'Import/Export': 'Importa/Esporta',
+'Index': 'Indice',
+'Internal State': 'Stato interno',
+'Invalid Query': 'Richiesta (query) non valida',
+'Invalid email': 'Email non valida',
+'Last name': 'Cognome',
+'Layout': 'Layout',
+'Main Menu': 'Menu principale',
+'Menu Model': 'Menu Modelli',
+'Name': 'Nome',
+'New Record': 'Nuovo elemento (record)',
+'No databases in this application': 'Nessun database presente in questa applicazione',
+'Origin': 'Origine',
+'Password': 'Password',
+'Powered by': 'Powered by',
+'Query:': 'Richiesta (query):',
+'Record ID': 'Record ID',
+'Registration key': 'Chiave di Registazione',
+'Reset Password key': 'Resetta chiave Password ',
+'Role': 'Ruolo',
+'Rows in table': 'Righe nella tabella',
+'Rows selected': 'Righe selezionate',
+'Stylesheet': 'Foglio di stile (stylesheet)',
+'Sure you want to delete this object?': 'Vuoi veramente cancellare questo oggetto?',
+'Table name': 'Nome tabella',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': 'La richiesta (query) è una condizione come ad esempio  "db.tabella1.campo1==\'valore\'". Una condizione come "db.tabella1.campo1==db.tabella2.campo2" produce un "JOIN" SQL.',
+'The output of the file is a dictionary that was rendered by the view': 'L\'output del file è un "dictionary" che è stato visualizzato dalla vista',
+'This is a copy of the scaffolding application': "Questa è una copia dell'applicazione di base (scaffold)",
+'Timestamp': 'Ora (timestamp)',
+'Update:': 'Aggiorna:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Per costruire richieste (query) più complesse si usano (...)&(...) come "e" (AND), (...)|(...) come "o" (OR), e ~(...) come negazione (NOT).',
+'User ID': 'ID Utente',
+'View': 'Vista',
+'Welcome %s': 'Benvenuto %s',
+'Welcome to web2py': 'Benvenuto su web2py',
+'Which called the function': 'che ha chiamato la funzione',
+'You are successfully running web2py': 'Stai eseguendo web2py con successo',
+'You can modify this application and adapt it to your needs': 'Puoi modificare questa applicazione adattandola alle tue necessità',
+'You visited the url': "Hai visitato l'URL",
+'appadmin is disabled because insecure channel': 'Amministrazione (appadmin) disabilitata: comunicazione non sicura',
+'cache': 'cache',
+'change password': 'Cambia password',
+'Online examples': 'Vedere gli esempi',
+'Administrative interface': "Interfaccia amministrativa",
+'customize me!': 'Personalizzami!',
+'data uploaded': 'dati caricati',
+'database': 'database',
+'database %s select': 'database %s select',
+'db': 'db',
+'design': 'progetta',
+'Documentation': 'Documentazione',
+'done!': 'fatto!',
+'edit profile': 'modifica profilo',
+'export as csv file': 'esporta come file CSV',
+'hello world': 'salve mondo',
+'insert new': 'inserisci nuovo',
+'insert new %s': 'inserisci nuovo %s',
+'invalid request': 'richiesta non valida',
+'located in the file': 'presente nel file',
+'login': 'accesso',
+'logout': 'uscita',
+'lost password?': 'dimenticato la password?',
+'new record inserted': 'nuovo record inserito',
+'next 100 rows': 'prossime 100 righe',
+'not authorized': 'non autorizzato',
+'or import from csv file': 'oppure importa da file CSV',
+'previous 100 rows': '100 righe precedenti',
+'record': 'record',
+'record does not exist': 'il record non esiste',
+'record id': 'record id',
+'register': 'registrazione',
+'selected': 'selezionato',
+'state': 'stato',
+'table': 'tabella',
+'unable to parse csv file': 'non riesco a decodificare questo file CSV',
+}

ADDED   applications/welcome/languages/pl-pl.py
Index: applications/welcome/languages/pl-pl.py
==================================================================
--- /dev/null
+++ applications/welcome/languages/pl-pl.py
@@ -0,0 +1,81 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"Uaktualnij" jest dodatkowym wyra\xc5\xbceniem postaci "pole1=\'nowawarto\xc5\x9b\xc4\x87\'". Nie mo\xc5\xbcesz uaktualni\xc4\x87 lub usun\xc4\x85\xc4\x87 wynik\xc3\xb3w z JOIN:',
+'%Y-%m-%d': '%Y-%m-%d',
+'%Y-%m-%d %H:%M:%S': '%Y-%m-%d %H:%M:%S',
+'%s rows deleted': 'Wierszy usuni\xc4\x99tych: %s',
+'%s rows updated': 'Wierszy uaktualnionych: %s',
+'Available databases and tables': 'Dost\xc4\x99pne bazy danych i tabele',
+'Cannot be empty': 'Nie mo\xc5\xbce by\xc4\x87 puste',
+'Change Password': 'Change Password',
+'Check to delete': 'Zaznacz aby usun\xc4\x85\xc4\x87',
+'Controller': 'Controller',
+'Copyright': 'Copyright',
+'Current request': 'Aktualne \xc5\xbc\xc4\x85danie',
+'Current response': 'Aktualna odpowied\xc5\xba',
+'Current session': 'Aktualna sesja',
+'DB Model': 'DB Model',
+'Database': 'Database',
+'Delete:': 'Usu\xc5\x84:',
+'Edit': 'Edit',
+'Edit Profile': 'Edit Profile',
+'Edit This App': 'Edit This App',
+'Edit current record': 'Edytuj aktualny rekord',
+'Hello World': 'Witaj \xc5\x9awiecie',
+'Import/Export': 'Importuj/eksportuj',
+'Index': 'Index',
+'Internal State': 'Stan wewn\xc4\x99trzny',
+'Invalid Query': 'B\xc5\x82\xc4\x99dne zapytanie',
+'Layout': 'Layout',
+'Login': 'Zaloguj',
+'Logout': 'Logout',
+'Lost Password': 'Przypomnij has\xc5\x82o',
+'Main Menu': 'Main Menu',
+'Menu Model': 'Menu Model',
+'New Record': 'Nowy rekord',
+'No databases in this application': 'Brak baz danych w tej aplikacji',
+'Powered by': 'Powered by',
+'Query:': 'Zapytanie:',
+'Register': 'Zarejestruj',
+'Rows in table': 'Wiersze w tabeli',
+'Rows selected': 'Wybrane wiersze',
+'Stylesheet': 'Stylesheet',
+'Sure you want to delete this object?': 'Czy na pewno chcesz usun\xc4\x85\xc4\x87 ten obiekt?',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': '"Zapytanie" jest warunkiem postaci "db.tabela1.pole1==\'warto\xc5\x9b\xc4\x87\'". Takie co\xc5\x9b jak "db.tabela1.pole1==db.tabela2.pole2" oznacza SQL JOIN.',
+'Update:': 'Uaktualnij:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'U\xc5\xbcyj (...)&(...) jako AND, (...)|(...) jako OR oraz ~(...)  jako NOT do tworzenia bardziej skomplikowanych zapyta\xc5\x84.',
+'View': 'View',
+'Welcome %s': 'Welcome %s',
+'Welcome to web2py': 'Witaj w web2py',
+'appadmin is disabled because insecure channel': 'appadmin is disabled because insecure channel',
+'cache': 'cache',
+'change password': 'change password',
+'Online examples': 'Kliknij aby przej\xc5\x9b\xc4\x87 do interaktywnych przyk\xc5\x82ad\xc3\xb3w',
+'Administrative interface': 'Kliknij aby przej\xc5\x9b\xc4\x87 do panelu administracyjnego',
+'customize me!': 'dostosuj mnie!',
+'data uploaded': 'dane wys\xc5\x82ane',
+'database': 'baza danych',
+'database %s select': 'wyb\xc3\xb3r z bazy danych %s',
+'db': 'baza danych',
+'design': 'projektuj',
+'done!': 'zrobione!',
+'edit profile': 'edit profile',
+'export as csv file': 'eksportuj jako plik csv',
+'insert new': 'wstaw nowy rekord tabeli',
+'insert new %s': 'wstaw nowy rekord do tabeli %s',
+'invalid request': 'B\xc5\x82\xc4\x99dne \xc5\xbc\xc4\x85danie',
+'login': 'login',
+'logout': 'logout',
+'new record inserted': 'nowy rekord zosta\xc5\x82 wstawiony',
+'next 100 rows': 'nast\xc4\x99pne 100 wierszy',
+'or import from csv file': 'lub zaimportuj z pliku csv',
+'previous 100 rows': 'poprzednie 100 wierszy',
+'record': 'record',
+'record does not exist': 'rekord nie istnieje',
+'record id': 'id rekordu',
+'register': 'register',
+'selected': 'wybranych',
+'state': 'stan',
+'table': 'tabela',
+'unable to parse csv file': 'nie mo\xc5\xbcna sparsowa\xc4\x87 pliku csv',
+}

ADDED   applications/welcome/languages/pl.py
Index: applications/welcome/languages/pl.py
==================================================================
--- /dev/null
+++ applications/welcome/languages/pl.py
@@ -0,0 +1,104 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"Uaktualnij" jest dodatkowym wyra\xc5\xbceniem postaci "pole1=\'nowawarto\xc5\x9b\xc4\x87\'". Nie mo\xc5\xbcesz uaktualni\xc4\x87 lub usun\xc4\x85\xc4\x87 wynik\xc3\xb3w z JOIN:',
+'%Y-%m-%d': '%Y-%m-%d',
+'%Y-%m-%d %H:%M:%S': '%Y-%m-%d %H:%M:%S',
+'%s rows deleted': 'Wierszy usuni\xc4\x99tych: %s',
+'%s rows updated': 'Wierszy uaktualnionych: %s',
+'Authentication': 'Uwierzytelnienie',
+'Available databases and tables': 'Dost\xc4\x99pne bazy danych i tabele',
+'Cannot be empty': 'Nie mo\xc5\xbce by\xc4\x87 puste',
+'Change Password': 'Zmie\xc5\x84 has\xc5\x82o',
+'Check to delete': 'Zaznacz aby usun\xc4\x85\xc4\x87',
+'Check to delete:': 'Zaznacz aby usun\xc4\x85\xc4\x87:',
+'Client IP': 'IP klienta',
+'Controller': 'Kontroler',
+'Copyright': 'Copyright',
+'Current request': 'Aktualne \xc5\xbc\xc4\x85danie',
+'Current response': 'Aktualna odpowied\xc5\xba',
+'Current session': 'Aktualna sesja',
+'DB Model': 'Model bazy danych',
+'Database': 'Baza danych',
+'Delete:': 'Usu\xc5\x84:',
+'Description': 'Opis',
+'E-mail': 'Adres e-mail',
+'Edit': 'Edycja',
+'Edit Profile': 'Edytuj profil',
+'Edit This App': 'Edytuj t\xc4\x99 aplikacj\xc4\x99',
+'Edit current record': 'Edytuj obecny rekord',
+'First name': 'Imi\xc4\x99',
+'Function disabled': 'Funkcja wy\xc5\x82\xc4\x85czona',
+'Group ID': 'ID grupy',
+'Hello World': 'Witaj \xc5\x9awiecie',
+'Import/Export': 'Importuj/eksportuj',
+'Index': 'Indeks',
+'Internal State': 'Stan wewn\xc4\x99trzny',
+'Invalid Query': 'B\xc5\x82\xc4\x99dne zapytanie',
+'Invalid email': 'B\xc5\x82\xc4\x99dny adres email',
+'Last name': 'Nazwisko',
+'Layout': 'Uk\xc5\x82ad',
+'Login': 'Zaloguj',
+'Logout': 'Wyloguj',
+'Lost Password': 'Przypomnij has\xc5\x82o',
+'Main Menu': 'Menu g\xc5\x82\xc3\xb3wne',
+'Menu Model': 'Model menu',
+'Name': 'Nazwa',
+'New Record': 'Nowy rekord',
+'No databases in this application': 'Brak baz danych w tej aplikacji',
+'Origin': '\xc5\xb9r\xc3\xb3d\xc5\x82o',
+'Password': 'Has\xc5\x82o',
+"Password fields don't match": 'Pola has\xc5\x82a nie s\xc4\x85 zgodne ze sob\xc4\x85',
+'Powered by': 'Zasilane przez',
+'Query:': 'Zapytanie:',
+'Record ID': 'ID rekordu',
+'Register': 'Zarejestruj',
+'Registration key': 'Klucz rejestracji',
+'Role': 'Rola',
+'Rows in table': 'Wiersze w tabeli',
+'Rows selected': 'Wybrane wiersze',
+'Stylesheet': 'Arkusz styl\xc3\xb3w',
+'Submit': 'Wy\xc5\x9blij',
+'Sure you want to delete this object?': 'Czy na pewno chcesz usun\xc4\x85\xc4\x87 ten obiekt?',
+'Table name': 'Nazwa tabeli',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': '"Zapytanie" jest warunkiem postaci "db.tabela1.pole1==\'warto\xc5\x9b\xc4\x87\'". Takie co\xc5\x9b jak "db.tabela1.pole1==db.tabela2.pole2" oznacza SQL JOIN.',
+'Timestamp': 'Znacznik czasu',
+'Update:': 'Uaktualnij:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'U\xc5\xbcyj (...)&(...) jako AND, (...)|(...) jako OR oraz ~(...)  jako NOT do tworzenia bardziej skomplikowanych zapyta\xc5\x84.',
+'User %(id)s Registered': 'U\xc5\xbcytkownik %(id)s zosta\xc5\x82 zarejestrowany',
+'User ID': 'ID u\xc5\xbcytkownika',
+'Verify Password': 'Potwierd\xc5\xba has\xc5\x82o',
+'View': 'Widok',
+'Welcome %s': 'Welcome %s',
+'Welcome to web2py': 'Witaj w web2py',
+'appadmin is disabled because insecure channel': 'administracja aplikacji wy\xc5\x82\xc4\x85czona z powodu braku bezpiecznego po\xc5\x82\xc4\x85czenia',
+'cache': 'cache',
+'change password': 'change password',
+'Online examples': 'Kliknij aby przej\xc5\x9b\xc4\x87 do interaktywnych przyk\xc5\x82ad\xc3\xb3w',
+'Administrative interface': 'Kliknij aby przej\xc5\x9b\xc4\x87 do panelu administracyjnego',
+'customize me!': 'dostosuj mnie!',
+'data uploaded': 'dane wys\xc5\x82ane',
+'database': 'baza danych',
+'database %s select': 'wyb\xc3\xb3r z bazy danych %s',
+'db': 'baza danych',
+'design': 'projektuj',
+'done!': 'zrobione!',
+'edit profile': 'edit profile',
+'export as csv file': 'eksportuj jako plik csv',
+'insert new': 'wstaw nowy rekord tabeli',
+'insert new %s': 'wstaw nowy rekord do tabeli %s',
+'invalid request': 'B\xc5\x82\xc4\x99dne \xc5\xbc\xc4\x85danie',
+'login': 'login',
+'logout': 'logout',
+'new record inserted': 'nowy rekord zosta\xc5\x82 wstawiony',
+'next 100 rows': 'nast\xc4\x99pne 100 wierszy',
+'or import from csv file': 'lub zaimportuj z pliku csv',
+'previous 100 rows': 'poprzednie 100 wierszy',
+'record': 'rekord',
+'record does not exist': 'rekord nie istnieje',
+'record id': 'id rekordu',
+'register': 'register',
+'selected': 'wybranych',
+'state': 'stan',
+'table': 'tabela',
+'unable to parse csv file': 'nie mo\xc5\xbcna sparsowa\xc4\x87 pliku csv',
+}

ADDED   applications/welcome/languages/pt-br.py
Index: applications/welcome/languages/pt-br.py
==================================================================
--- /dev/null
+++ applications/welcome/languages/pt-br.py
@@ -0,0 +1,142 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"update" é uma expressão opcional como "campo1=\'novovalor\'". Você não pode atualizar ou apagar os resultados de um JOIN',
+'%Y-%m-%d': '%d-%m-%Y',
+'%Y-%m-%d %H:%M:%S': '%d-%m-%Y %H:%M:%S',
+'%s rows deleted': '%s linhas apagadas',
+'%s rows updated': '%s linhas atualizadas',
+'About': 'About',
+'Access Control': 'Access Control',
+'Ajax Recipes': 'Ajax Recipes',
+'Available databases and tables': 'Bancos de dados e tabelas disponíveis',
+'Buy this book': 'Buy this book',
+'Cannot be empty': 'Não pode ser vazio',
+'Check to delete': 'Marque para apagar',
+'Client IP': 'Client IP',
+'Community': 'Community',
+'Controller': 'Controlador',
+'Copyright': 'Copyright',
+'Current request': 'Requisição atual',
+'Current response': 'Resposta atual',
+'Current session': 'Sessão atual',
+'DB Model': 'Modelo BD',
+'Database': 'Banco de dados',
+'Delete:': 'Apagar:',
+'Demo': 'Demo',
+'Deployment Recipes': 'Deployment Recipes',
+'Description': 'Description',
+'Documentation': 'Documentation',
+'Download': 'Download',
+'E-mail': 'E-mail',
+'Edit': 'Editar',
+'Edit This App': 'Edit This App',
+'Edit current record': 'Editar o registro atual',
+'Errors': 'Errors',
+'FAQ': 'FAQ',
+'First name': 'First name',
+'Forms and Validators': 'Forms and Validators',
+'Free Applications': 'Free Applications',
+'Group ID': 'Group ID',
+'Groups': 'Groups',
+'Hello World': 'Olá Mundo',
+'Home': 'Home',
+'Import/Export': 'Importar/Exportar',
+'Index': 'Início',
+'Internal State': 'Estado Interno',
+'Introduction': 'Introduction',
+'Invalid Query': 'Consulta Inválida',
+'Invalid email': 'Invalid email',
+'Last name': 'Last name',
+'Layout': 'Layout',
+'Layouts': 'Layouts',
+'Live chat': 'Live chat',
+'Login': 'Autentique-se',
+'Lost Password': 'Esqueceu sua senha?',
+'Main Menu': 'Menu Principal',
+'Menu Model': 'Modelo de Menu',
+'Name': 'Name',
+'New Record': 'Novo Registro',
+'No databases in this application': 'Sem bancos de dados nesta aplicação',
+'Origin': 'Origin',
+'Other Recipes': 'Other Recipes',
+'Overview': 'Overview',
+'Password': 'Password',
+'Plugins': 'Plugins',
+'Powered by': 'Powered by',
+'Preface': 'Preface',
+'Python': 'Python',
+'Query:': 'Consulta:',
+'Quick Examples': 'Quick Examples',
+'Recipes': 'Recipes',
+'Record ID': 'Record ID',
+'Register': 'Registre-se',
+'Registration key': 'Registration key',
+'Reset Password key': 'Reset Password key',
+'Resources': 'Resources',
+'Role': 'Role',
+'Rows in table': 'Linhas na tabela',
+'Rows selected': 'Linhas selecionadas',
+'Semantic': 'Semantic',
+'Services': 'Services',
+'Stylesheet': 'Stylesheet',
+'Support': 'Support',
+'Sure you want to delete this object?': 'Está certo(a) que deseja apagar esse objeto ?',
+'Table name': 'Table name',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': 'Uma "consulta" é uma condição como "db.tabela1.campo1==\'valor\'". Expressões como "db.tabela1.campo1==db.tabela2.campo2" resultam em um JOIN SQL.',
+'The Core': 'The Core',
+'The Views': 'The Views',
+'The output of the file is a dictionary that was rendered by the view': 'The output of the file is a dictionary that was rendered by the view',
+'This App': 'This App',
+'This is a copy of the scaffolding application': 'This is a copy of the scaffolding application',
+'Timestamp': 'Timestamp',
+'Twitter': 'Twitter',
+'Update:': 'Atualizar:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Use (...)&(...) para AND, (...)|(...) para OR, e ~(...)  para NOT para construir consultas mais complexas.',
+'User ID': 'User ID',
+'User Voice': 'User Voice',
+'Videos': 'Videos',
+'View': 'Visualização',
+'Web2py': 'Web2py',
+'Welcome': 'Welcome',
+'Welcome %s': 'Vem vindo %s',
+'Welcome to web2py': 'Bem vindo ao web2py',
+'Which called the function': 'Which called the function',
+'You are successfully running web2py': 'You are successfully running web2py',
+'You are successfully running web2py.': 'You are successfully running web2py.',
+'You can modify this application and adapt it to your needs': 'You can modify this application and adapt it to your needs',
+'You visited the url': 'You visited the url',
+'appadmin is disabled because insecure channel': 'Administração desativada devido ao canal inseguro',
+'cache': 'cache',
+'change password': 'modificar senha',
+'Online examples': 'Alguns exemplos',
+'Administrative interface': 'Interface administrativa',
+'customize me!': 'Personalize-me!',
+'data uploaded': 'dados enviados',
+'database': 'banco de dados',
+'database %s select': 'Selecionar banco de dados %s',
+'db': 'bd',
+'design': 'design',
+'Documentation': 'Documentation',
+'done!': 'concluído!',
+'edit profile': 'editar perfil',
+'export as csv file': 'exportar como um arquivo csv',
+'insert new': 'inserir novo',
+'insert new %s': 'inserir novo %s',
+'invalid request': 'requisição inválida',
+'located in the file': 'located in the file',
+'login': 'Entrar',
+'logout': 'Sair',
+'lost password?': 'lost password?',
+'new record inserted': 'novo registro inserido',
+'next 100 rows': 'próximas 100 linhas',
+'or import from csv file': 'ou importar de um arquivo csv',
+'previous 100 rows': '100 linhas anteriores',
+'record': 'registro',
+'record does not exist': 'registro não existe',
+'record id': 'id do registro',
+'register': 'Registre-se',
+'selected': 'selecionado',
+'state': 'estado',
+'table': 'tabela',
+'unable to parse csv file': 'não foi possível analisar arquivo csv',
+}

ADDED   applications/welcome/languages/pt-pt.py
Index: applications/welcome/languages/pt-pt.py
==================================================================
--- /dev/null
+++ applications/welcome/languages/pt-pt.py
@@ -0,0 +1,116 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"update" é uma expressão opcional como "field1=\'newvalue\'". Não pode actualizar ou eliminar os resultados de um JOIN',
+'%Y-%m-%d': '%Y-%m-%d',
+'%Y-%m-%d %H:%M:%S': '%Y-%m-%d %H:%M:%S',
+'%s rows deleted': '%s linhas eliminadas',
+'%s rows updated': '%s linhas actualizadas',
+'About': 'About',
+'Author Reference Auth User': 'Author Reference Auth User',
+'Author Reference Auth User.username': 'Author Reference Auth User.username',
+'Available databases and tables': 'bases de dados e tabelas disponíveis',
+'Cannot be empty': 'não pode ser vazio',
+'Category Create': 'Category Create',
+'Category Select': 'Category Select',
+'Check to delete': 'seleccione para eliminar',
+'Comment Create': 'Comment Create',
+'Comment Select': 'Comment Select',
+'Content': 'Content',
+'Controller': 'Controlador',
+'Copyright': 'Direitos de cópia',
+'Created By': 'Created By',
+'Created On': 'Created On',
+'Current request': 'pedido currente',
+'Current response': 'resposta currente',
+'Current session': 'sessão currente',
+'DB Model': 'Modelo de BD',
+'Database': 'Base de dados',
+'Delete:': 'Eliminar:',
+'Edit': 'Editar',
+'Edit This App': 'Edite esta aplicação',
+'Edit current record': 'Edição de registo currente',
+'Email': 'Email',
+'First Name': 'First Name',
+'For %s #%s': 'For %s #%s',
+'Hello World': 'Olá Mundo',
+'Import/Export': 'Importar/Exportar',
+'Index': 'Índice',
+'Internal State': 'Estado interno',
+'Invalid Query': 'Consulta Inválida',
+'Last Name': 'Last Name',
+'Layout': 'Esboço',
+'Main Menu': 'Menu Principal',
+'Menu Model': 'Menu do Modelo',
+'Modified By': 'Modified By',
+'Modified On': 'Modified On',
+'Name': 'Name',
+'New Record': 'Novo Registo',
+'No Data': 'No Data',
+'No databases in this application': 'Não há bases de dados nesta aplicação',
+'Password': 'Password',
+'Post Create': 'Post Create',
+'Post Select': 'Post Select',
+'Powered by': 'Suportado por',
+'Query:': 'Interrogação:',
+'Replyto Reference Post': 'Replyto Reference Post',
+'Rows in table': 'Linhas numa tabela',
+'Rows selected': 'Linhas seleccionadas',
+'Stylesheet': 'Folha de estilo',
+'Sure you want to delete this object?': 'Tem a certeza que deseja eliminar este objecto?',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': 'A "query" é uma condição do tipo "db.table1.field1==\'value\'". Algo como "db.table1.field1==db.table2.field2" resultaria num SQL JOIN.',
+'Title': 'Title',
+'Update:': 'Actualização:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Utilize (...)&(...) para AND, (...)|(...) para OR, e ~(...)  para NOT para construir interrogações mais complexas.',
+'Username': 'Username',
+'View': 'Vista',
+'Welcome %s': 'Bem-vindo(a) %s',
+'Welcome to Gluonization': 'Bem vindo ao Web2py',
+'Welcome to web2py': 'Bem-vindo(a) ao web2py',
+'When': 'When',
+'appadmin is disabled because insecure channel': 'appadmin está desactivada pois o canal é inseguro',
+'cache': 'cache',
+'change password': 'alterar palavra-chave',
+'Online examples': 'Exemplos online',
+'Administrative interface': 'Painel administrativo',
+'create new category': 'create new category',
+'create new comment': 'create new comment',
+'create new post': 'create new post',
+'customize me!': 'Personaliza-me!',
+'data uploaded': 'informação enviada',
+'database': 'base de dados',
+'database %s select': 'selecção de base de dados %s',
+'db': 'bd',
+'design': 'design',
+'done!': 'concluído!',
+'edit category': 'edit category',
+'edit comment': 'edit comment',
+'edit post': 'edit post',
+'edit profile': 'Editar perfil',
+'export as csv file': 'exportar como ficheiro csv',
+'insert new': 'inserir novo',
+'insert new %s': 'inserir novo %s',
+'invalid request': 'Pedido Inválido',
+'login': 'login',
+'logout': 'logout',
+'new record inserted': 'novo registo inserido',
+'next 100 rows': 'próximas 100 linhas',
+'or import from csv file': 'ou importe a partir de ficheiro csv',
+'previous 100 rows': '100 linhas anteriores',
+'record': 'registo',
+'record does not exist': 'registo inexistente',
+'record id': 'id de registo',
+'register': 'register',
+'search category': 'search category',
+'search comment': 'search comment',
+'search post': 'search post',
+'select category': 'select category',
+'select comment': 'select comment',
+'select post': 'select post',
+'selected': 'seleccionado(s)',
+'show category': 'show category',
+'show comment': 'show comment',
+'show post': 'show post',
+'state': 'estado',
+'table': 'tabela',
+'unable to parse csv file': 'não foi possível carregar ficheiro csv',
+}

ADDED   applications/welcome/languages/pt.py
Index: applications/welcome/languages/pt.py
==================================================================
--- /dev/null
+++ applications/welcome/languages/pt.py
@@ -0,0 +1,116 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"update" é uma expressão opcional como "field1=\'newvalue\'". Não pode actualizar ou eliminar os resultados de um JOIN',
+'%Y-%m-%d': '%Y-%m-%d',
+'%Y-%m-%d %H:%M:%S': '%Y-%m-%d %H:%M:%S',
+'%s rows deleted': '%s linhas eliminadas',
+'%s rows updated': '%s linhas actualizadas',
+'About': 'About',
+'Author Reference Auth User': 'Author Reference Auth User',
+'Author Reference Auth User.username': 'Author Reference Auth User.username',
+'Available databases and tables': 'bases de dados e tabelas disponíveis',
+'Cannot be empty': 'não pode ser vazio',
+'Category Create': 'Category Create',
+'Category Select': 'Category Select',
+'Check to delete': 'seleccione para eliminar',
+'Comment Create': 'Comment Create',
+'Comment Select': 'Comment Select',
+'Content': 'Content',
+'Controller': 'Controlador',
+'Copyright': 'Direitos de cópia',
+'Created By': 'Created By',
+'Created On': 'Created On',
+'Current request': 'pedido currente',
+'Current response': 'resposta currente',
+'Current session': 'sessão currente',
+'DB Model': 'Modelo de BD',
+'Database': 'Base de dados',
+'Delete:': 'Eliminar:',
+'Edit': 'Editar',
+'Edit This App': 'Edite esta aplicação',
+'Edit current record': 'Edição de registo currente',
+'Email': 'Email',
+'First Name': 'First Name',
+'For %s #%s': 'For %s #%s',
+'Hello World': 'Olá Mundo',
+'Import/Export': 'Importar/Exportar',
+'Index': 'Índice',
+'Internal State': 'Estado interno',
+'Invalid Query': 'Consulta Inválida',
+'Last Name': 'Last Name',
+'Layout': 'Esboço',
+'Main Menu': 'Menu Principal',
+'Menu Model': 'Menu do Modelo',
+'Modified By': 'Modified By',
+'Modified On': 'Modified On',
+'Name': 'Name',
+'New Record': 'Novo Registo',
+'No Data': 'No Data',
+'No databases in this application': 'Não há bases de dados nesta aplicação',
+'Password': 'Password',
+'Post Create': 'Post Create',
+'Post Select': 'Post Select',
+'Powered by': 'Suportado por',
+'Query:': 'Interrogação:',
+'Replyto Reference Post': 'Replyto Reference Post',
+'Rows in table': 'Linhas numa tabela',
+'Rows selected': 'Linhas seleccionadas',
+'Stylesheet': 'Folha de estilo',
+'Sure you want to delete this object?': 'Tem a certeza que deseja eliminar este objecto?',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': 'A "query" é uma condição do tipo "db.table1.field1==\'value\'". Algo como "db.table1.field1==db.table2.field2" resultaria num SQL JOIN.',
+'Title': 'Title',
+'Update:': 'Actualização:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Utilize (...)&(...) para AND, (...)|(...) para OR, e ~(...)  para NOT para construir interrogações mais complexas.',
+'Username': 'Username',
+'View': 'Vista',
+'Welcome %s': 'Bem-vindo(a) %s',
+'Welcome to Gluonization': 'Bem vindo ao Web2py',
+'Welcome to web2py': 'Bem-vindo(a) ao web2py',
+'When': 'When',
+'appadmin is disabled because insecure channel': 'appadmin está desactivada pois o canal é inseguro',
+'cache': 'cache',
+'change password': 'alterar palavra-chave',
+'Online examples': 'Exemplos online',
+'Administrative interface': 'Painel administrativo',
+'create new category': 'create new category',
+'create new comment': 'create new comment',
+'create new post': 'create new post',
+'customize me!': 'Personaliza-me!',
+'data uploaded': 'informação enviada',
+'database': 'base de dados',
+'database %s select': 'selecção de base de dados %s',
+'db': 'bd',
+'design': 'design',
+'done!': 'concluído!',
+'edit category': 'edit category',
+'edit comment': 'edit comment',
+'edit post': 'edit post',
+'edit profile': 'Editar perfil',
+'export as csv file': 'exportar como ficheiro csv',
+'insert new': 'inserir novo',
+'insert new %s': 'inserir novo %s',
+'invalid request': 'Pedido Inválido',
+'login': 'login',
+'logout': 'logout',
+'new record inserted': 'novo registo inserido',
+'next 100 rows': 'próximas 100 linhas',
+'or import from csv file': 'ou importe a partir de ficheiro csv',
+'previous 100 rows': '100 linhas anteriores',
+'record': 'registo',
+'record does not exist': 'registo inexistente',
+'record id': 'id de registo',
+'register': 'register',
+'search category': 'search category',
+'search comment': 'search comment',
+'search post': 'search post',
+'select category': 'select category',
+'select comment': 'select comment',
+'select post': 'select post',
+'selected': 'seleccionado(s)',
+'show category': 'show category',
+'show comment': 'show comment',
+'show post': 'show post',
+'state': 'estado',
+'table': 'tabela',
+'unable to parse csv file': 'não foi possível carregar ficheiro csv',
+}

ADDED   applications/welcome/languages/ru-ru.py
Index: applications/welcome/languages/ru-ru.py
==================================================================
--- /dev/null
+++ applications/welcome/languages/ru-ru.py
@@ -0,0 +1,96 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"Изменить" - необязательное выражение вида "field1=\'новое значение\'". Результаты операции JOIN нельзя изменить или удалить.',
+'%Y-%m-%d': '%Y-%m-%d',
+'%Y-%m-%d %H:%M:%S': '%Y-%m-%d %H:%M:%S',
+'%s rows deleted': '%s строк удалено',
+'%s rows updated': '%s строк изменено',
+'Available databases and tables': 'Базы данных и таблицы',
+'Cannot be empty': 'Пустое значение недопустимо',
+'Change Password': 'Смените пароль',
+'Check to delete': 'Удалить',
+'Check to delete:': 'Удалить:',
+'Client IP': 'Client IP',
+'Current request': 'Текущий запрос',
+'Current response': 'Текущий ответ',
+'Current session': 'Текущая сессия',
+'Delete:': 'Удалить:',
+'Description': 'Описание',
+'E-mail': 'E-mail',
+'Edit Profile': 'Редактировать профиль',
+'Edit current record': 'Редактировать текущую запись',
+'First name': 'Имя',
+'Group ID': 'Group ID',
+'Hello World': 'Заработало!',
+'Import/Export': 'Импорт/экспорт',
+'Internal State': 'Внутренне состояние',
+'Invalid Query': 'Неверный запрос',
+'Invalid email': 'Неверный email',
+'Invalid login': 'Неверный логин',
+'Invalid password': 'Неверный пароль',
+'Last name': 'Фамилия',
+'Logged in': 'Вход выполнен',
+'Logged out': 'Выход выполнен',
+'Login': 'Вход',
+'Logout': 'Выход',
+'Lost Password': 'Забыли пароль?',
+'Name': 'Name',
+'New Record': 'Новая запись',
+'New password': 'Новый пароль',
+'No databases in this application': 'В приложении нет баз данных',
+'Old password': 'Старый пароль',
+'Origin': 'Происхождение',
+'Password': 'Пароль',
+"Password fields don't match": 'Пароли не совпадают',
+'Query:': 'Запрос:',
+'Record ID': 'ID записи',
+'Register': 'Зарегистрироваться',
+'Registration key': 'Ключ регистрации',
+'Remember me (for 30 days)': 'Запомнить меня (на 30 дней)',
+'Reset Password key': 'Сбросить ключ пароля',
+'Role': 'Роль',
+'Rows in table': 'Строк в таблице',
+'Rows selected': 'Выделено строк',
+'Submit': 'Отправить',
+'Sure you want to delete this object?': 'Подтвердите удаление объекта',
+'Table name': 'Имя таблицы',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': '"Запрос" - это условие вида "db.table1.field1==\'значение\'". Выражение вида "db.table1.field1==db.table2.field2" формирует SQL JOIN.',
+'Timestamp': 'Отметка времени',
+'Update:': 'Изменить:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Для построение сложных запросов используйте операторы "И": (...)&(...), "ИЛИ": (...)|(...), "НЕ": ~(...).',
+'User %(id)s Logged-in': 'Пользователь %(id)s вошёл',
+'User %(id)s Logged-out': 'Пользователь %(id)s вышел',
+'User %(id)s Password changed': 'Пользователь %(id)s сменил пароль',
+'User %(id)s Profile updated': 'Пользователь %(id)s обновил профиль',
+'User %(id)s Registered': 'Пользователь %(id)s зарегистрировался',
+'User ID': 'ID пользователя',
+'Verify Password': 'Повторите пароль',
+'Welcome to web2py': 'Добро пожаловать в web2py',
+'Online examples': 'примеры он-лайн',
+'Administrative interface': 'административный интерфейс',
+'customize me!': 'настройте внешний вид!',
+'data uploaded': 'данные загружены',
+'database': 'база данных',
+'database %s select': 'выбор базы данных %s',
+'db': 'БД',
+'design': 'дизайн',
+'done!': 'готово!',
+'export as csv file': 'экспорт в  csv-файл',
+'insert new': 'добавить',
+'insert new %s': 'добавить %s',
+'invalid request': 'неверный запрос',
+'login': 'вход',
+'logout': 'выход',
+'new record inserted': 'новая запись добавлена',
+'next 100 rows': 'следующие 100 строк',
+'or import from csv file': 'или импорт из csv-файла',
+'password': 'пароль',
+'previous 100 rows': 'предыдущие 100 строк',
+'profile': 'профиль',
+'record does not exist': 'запись не найдена',
+'record id': 'id записи',
+'selected': 'выбрано',
+'state': 'состояние',
+'table': 'таблица',
+'unable to parse csv file': 'нечитаемый csv-файл',
+}

ADDED   applications/welcome/languages/sk-sk.py
Index: applications/welcome/languages/sk-sk.py
==================================================================
--- /dev/null
+++ applications/welcome/languages/sk-sk.py
@@ -0,0 +1,111 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"update" je voliteľný výraz ako "field1=\'newvalue\'". Nemôžete upravovať alebo zmazať výsledky JOINu',
+'%Y-%m-%d': '%d.%m.%Y',
+'%Y-%m-%d %H:%M:%S': '%d.%m.%Y %H:%M:%S',
+'%s rows deleted': '%s zmazaných záznamov',
+'%s rows updated': '%s upravených záznamov',
+'Available databases and tables': 'Dostupné databázy a tabuľky',
+'Cannot be empty': 'Nemôže byť prázdne',
+'Check to delete': 'Označiť na zmazanie',
+'Controller': 'Controller',
+'Copyright': 'Copyright',
+'Current request': 'Aktuálna požiadavka',
+'Current response': 'Aktuálna odpoveď',
+'Current session': 'Aktuálne sedenie',
+'DB Model': 'DB Model',
+'Database': 'Databáza',
+'Delete:': 'Zmazať:',
+'Description': 'Popis',
+'Edit': 'Upraviť',
+'Edit Profile': 'Upraviť profil',
+'Edit current record': 'Upraviť aktuálny záznam',
+'First name': 'Krstné meno',
+'Group ID': 'ID skupiny',
+'Hello World': 'Ahoj svet',
+'Import/Export': 'Import/Export',
+'Index': 'Index',
+'Internal State': 'Vnútorný stav',
+'Invalid email': 'Neplatný email',
+'Invalid Query': 'Neplatná otázka',
+'Invalid password': 'Nesprávne heslo',
+'Last name': 'Priezvisko',
+'Layout': 'Layout',
+'Logged in': 'Prihlásený',
+'Logged out': 'Odhlásený',
+'Lost Password': 'Stratené heslo?',
+'Menu Model': 'Menu Model',
+'Name': 'Meno',
+'New Record': 'Nový záznam',
+'New password': 'Nové heslo',
+'No databases in this application': 'V tejto aplikácii nie sú databázy',
+'Old password': 'Staré heslo',
+'Origin': 'Pôvod',
+'Password': 'Heslo',
+'Powered by': 'Powered by',
+'Query:': 'Otázka:',
+'Record ID': 'ID záznamu',
+'Register': 'Zaregistrovať sa',
+'Registration key': 'Registračný kľúč',
+'Remember me (for 30 days)': 'Zapamätaj si ma (na 30 dní)',
+'Reset Password key': 'Nastaviť registračný kľúč',
+'Role': 'Rola',
+'Rows in table': 'riadkov v tabuľke',
+'Rows selected': 'označených riadkov',
+'Submit': 'Odoslať',
+'Stylesheet': 'Stylesheet',
+'Sure you want to delete this object?': 'Ste si istí, že chcete zmazať tento objekt?',
+'Table name': 'Názov tabuľky',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': '"query" je podmienka ako "db.table1.field1==\'value\'". Niečo ako "db.table1.field1==db.table2.field2" má za výsledok SQL JOIN.',
+'The output of the file is a dictionary that was rendered by the view': 'Výstup zo súboru je slovník, ktorý bol zobrazený vo view',
+'This is a copy of the scaffolding application': 'Toto je kópia skeletu aplikácie',
+'Timestamp': 'Časová pečiatka',
+'Update:': 'Upraviť:',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': 'Použite (...)&(...) pre AND, (...)|(...) pre OR a ~(...) pre NOT na poskladanie komplexnejších otázok.',
+'User %(id)s Logged-in': 'Používateľ %(id)s prihlásený',
+'User %(id)s Logged-out': 'Používateľ %(id)s odhlásený',
+'User %(id)s Password changed': 'Používateľ %(id)s zmenil heslo',
+'User %(id)s Profile updated': 'Používateľ %(id)s upravil profil',
+'User %(id)s Registered': 'Používateľ %(id)s sa zaregistroval',
+'User ID': 'ID používateľa',
+'Verify Password': 'Zopakujte heslo',
+'View': 'Zobraziť',
+'Welcome to web2py': 'Vitajte vo web2py',
+'Which called the function': 'Ktorý zavolal funkciu',
+'You are successfully running web2py': 'Úspešne ste spustili web2py',
+'You can modify this application and adapt it to your needs': 'Môžete upraviť túto aplikáciu a prispôsobiť ju svojim potrebám',
+'You visited the url': 'Navštívili ste URL',
+'appadmin is disabled because insecure channel': 'appadmin je zakázaný bez zabezpečeného spojenia',
+'cache': 'cache',
+'Online examples': 'pre online príklady kliknite sem',
+'Administrative interface': 'pre administrátorské rozhranie kliknite sem',
+'customize me!': 'prispôsob ma!',
+'data uploaded': 'údaje naplnené',
+'database': 'databáza',
+'database %s select': 'databáza %s výber',
+'db': 'db',
+'design': 'návrh',
+'Documentation': 'Dokumentácia',
+'done!': 'hotovo!',
+'export as csv file': 'exportovať do csv súboru',
+'insert new': 'vložiť nový záznam ',
+'insert new %s': 'vložiť nový  záznam %s',
+'invalid request': 'Neplatná požiadavka',
+'located in the file': 'nachádzajúci sa v súbore ',
+'login': 'prihlásiť',
+'logout': 'odhlásiť',
+'lost password?': 'stratené heslo?',
+'new record inserted': 'nový záznam bol vložený',
+'next 100 rows': 'ďalších 100 riadkov',
+'or import from csv file': 'alebo naimportovať z csv súboru',
+'password': 'heslo',
+'previous 100 rows': 'predchádzajúcich 100 riadkov',
+'record': 'záznam',
+'record does not exist': 'záznam neexistuje',
+'record id': 'id záznamu',
+'register': 'registrovať',
+'selected': 'označených',
+'state': 'stav',
+'table': 'tabuľka',
+'unable to parse csv file': 'nedá sa načítať csv súbor',
+}

ADDED   applications/welcome/languages/zh-tw.py
Index: applications/welcome/languages/zh-tw.py
==================================================================
--- /dev/null
+++ applications/welcome/languages/zh-tw.py
@@ -0,0 +1,165 @@
+# coding: utf8
+{
+'"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN': '"更新" 是選擇性的條件式, 格式就像 "欄位1=\'值\'". 但是 JOIN 的資料不可以使用 update 或是 delete"',
+'%Y-%m-%d': '%Y-%m-%d',
+'%Y-%m-%d %H:%M:%S': '%Y-%m-%d %H:%M:%S',
+'%s rows deleted': '已刪除 %s 筆',
+'%s rows updated': '已更新 %s 筆',
+'(something like "it-it")': '(格式類似 "zh-tw")',
+'A new version of web2py is available': '新版的 web2py 已發行',
+'A new version of web2py is available: %s': '新版的 web2py 已發行: %s',
+'ATTENTION: Login requires a secure (HTTPS) connection or running on localhost.': '注意: 登入管理帳號需要安全連線(HTTPS)或是在本機連線(localhost).',
+'ATTENTION: TESTING IS NOT THREAD SAFE SO DO NOT PERFORM MULTIPLE TESTS CONCURRENTLY.': '注意: 因為在測試模式不保證多執行緒安全性，也就是說不可以同時執行多個測試案例',
+'ATTENTION: you cannot edit the running application!': '注意:不可編輯正在執行的應用程式!',
+'About': '關於',
+'About application': '關於本應用程式',
+'Admin is disabled because insecure channel': '管理功能(Admin)在不安全連線環境下自動關閉',
+'Admin is disabled because unsecure channel': '管理功能(Admin)在不安全連線環境下自動關閉',
+'Administrator Password:': '管理員密碼:',
+'Are you sure you want to delete file "%s"?': '確定要刪除檔案"%s"?',
+'Are you sure you want to uninstall application "%s"': '確定要移除應用程式 "%s"',
+'Are you sure you want to uninstall application "%s"?': '確定要移除應用程式 "%s"',
+'Authentication': '驗證',
+'Available databases and tables': '可提供的資料庫和資料表',
+'Cannot be empty': '不可空白',
+'Cannot compile: there are errors in your app.        Debug it, correct errors and try again.': '無法編譯:應用程式中含有錯誤，請除錯後再試一次.',
+'Change Password': '變更密碼',
+'Check to delete': '打勾代表刪除',
+'Check to delete:': '點選以示刪除:',
+'Client IP': '客戶端網址(IP)',
+'Controller': '控件',
+'Controllers': '控件',
+'Copyright': '版權所有',
+'Create new application': '創建應用程式',
+'Current request': '目前網路資料要求(request)',
+'Current response': '目前網路資料回應(response)',
+'Current session': '目前網路連線資訊(session)',
+'DB Model': '資料庫模組',
+'DESIGN': '設計',
+'Database': '資料庫',
+'Date and Time': '日期和時間',
+'Delete': '刪除',
+'Delete:': '刪除:',
+'Deploy on Google App Engine': '配置到 Google App Engine',
+'Description': '描述',
+'Design for': '設計為了',
+'E-mail': '電子郵件',
+'EDIT': '編輯',
+'Edit': '編輯',
+'Edit Profile': '編輯設定檔',
+'Edit This App': '編輯本應用程式',
+'Edit application': '編輯應用程式',
+'Edit current record': '編輯當前紀錄',
+'Editing file': '編輯檔案',
+'Editing file "%s"': '編輯檔案"%s"',
+'Error logs for "%(app)s"': '"%(app)s"的錯誤紀錄',
+'First name': '名',
+'Functions with no doctests will result in [passed] tests.': '沒有 doctests 的函式會顯示 [passed].',
+'Group ID': '群組編號',
+'Hello World': '嗨! 世界',
+'Import/Export': '匯入/匯出',
+'Index': '索引',
+'Installed applications': '已安裝應用程式',
+'Internal State': '內部狀態',
+'Invalid Query': '不合法的查詢',
+'Invalid action': '不合法的動作(action)',
+'Invalid email': '不合法的電子郵件',
+'Language files (static strings) updated': '語言檔已更新',
+'Languages': '各國語言',
+'Last name': '姓',
+'Last saved on:': '最後儲存時間:',
+'Layout': '網頁配置',
+'License for': '軟體版權為',
+'Login': '登入',
+'Login to the Administrative Interface': '登入到管理員介面',
+'Logout': '登出',
+'Lost Password': '密碼遺忘',
+'Main Menu': '主選單',
+'Menu Model': '選單模組(menu)',
+'Models': '資料模組',
+'Modules': '程式模組',
+'NO': '否',
+'Name': '名字',
+'New Record': '新紀錄',
+'No databases in this application': '這應用程式不含資料庫',
+'Origin': '原文',
+'Original/Translation': '原文/翻譯',
+'Password': '密碼',
+"Password fields don't match": '密碼欄不匹配',
+'Peeking at file': '選擇檔案',
+'Powered by': '基於以下技術構建：',
+'Query:': '查詢:',
+'Record ID': '紀錄編號',
+'Register': '註冊',
+'Registration key': '註冊金鑰',
+'Remember me (for 30 days)': '記住我(30 天)',
+'Reset Password key': '重設密碼',
+'Resolve Conflict file': '解決衝突檔案',
+'Role': '角色',
+'Rows in table': '在資料表裏的資料',
+'Rows selected': '筆資料被選擇',
+'Saved file hash:': '檔案雜湊值已紀錄:',
+'Static files': '靜態檔案',
+'Stylesheet': '網頁風格檔',
+'Submit': '傳送',
+'Sure you want to delete this object?': '確定要刪除此物件?',
+'Table name': '資料表名稱',
+'Testing application': '測試中的應用程式',
+'The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.': '"查詢"是一個像 "db.表1.欄位1==\'值\'" 的條件式. 以"db.表1.欄位1==db.表2.欄位2"方式則相當於執行 JOIN SQL.',
+'There are no controllers': '沒有控件(controllers)',
+'There are no models': '沒有資料庫模組(models)',
+'There are no modules': '沒有程式模組(modules)',
+'There are no static files': '沒有靜態檔案',
+'There are no translators, only default language is supported': '沒有翻譯檔,只支援原始語言',
+'There are no views': '沒有視圖',
+'This is the %(filename)s template': '這是%(filename)s檔案的樣板(template)',
+'Ticket': '問題單',
+'Timestamp': '時間標記',
+'Unable to check for upgrades': '無法做升級檢查',
+'Unable to download': '無法下載',
+'Unable to download app': '無法下載應用程式',
+'Update:': '更新:',
+'Upload existing application': '更新存在的應用程式',
+'Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.': '使用下列方式來組合更複雜的條件式, (...)&(...) 代表同時存在的條件, (...)|(...) 代表擇一的條件, ~(...)則代表反向條件.',
+'User %(id)s Logged-in': '使用者 %(id)s 已登入',
+'User %(id)s Registered': '使用者 %(id)s 已註冊',
+'User ID': '使用者編號',
+'Verify Password': '驗證密碼',
+'View': '視圖',
+'Views': '視圖',
+'Welcome %s': '歡迎 %s',
+'Welcome to web2py': '歡迎使用 web2py',
+'YES': '是',
+'about': '關於',
+'appadmin is disabled because insecure channel': '因為來自非安全通道,管理介面關閉',
+'cache': '快取記憶體',
+'change password': '變更密碼',
+'Online examples': '點此處進入線上範例',
+'Administrative interface': '點此處進入管理介面',
+'customize me!': '請調整我!',
+'data uploaded': '資料已上傳',
+'database': '資料庫',
+'database %s select': '已選擇 %s 資料庫',
+'db': 'db',
+'design': '設計',
+'done!': '完成!',
+'edit profile': '編輯設定檔',
+'export as csv file': '以逗號分隔檔(csv)格式匯出',
+'insert new': '插入新資料',
+'insert new %s': '插入新資料 %s',
+'invalid request': '不合法的網路要求(request)',
+'login': '登入',
+'logout': '登出',
+'new record inserted': '已插入新紀錄',
+'next 100 rows': '往後 100 筆',
+'or import from csv file': '或是從逗號分隔檔(CSV)匯入',
+'previous 100 rows': '往前 100 筆',
+'record': '紀錄',
+'record does not exist': '紀錄不存在',
+'record id': '紀錄編號',
+'register': '註冊',
+'selected': '已選擇',
+'state': '狀態',
+'table': '資料表',
+'unable to parse csv file': '無法解析逗號分隔檔(csv)',
+}

ADDED   applications/welcome/models/db.py
Index: applications/welcome/models/db.py
==================================================================
--- /dev/null
+++ applications/welcome/models/db.py
@@ -0,0 +1,81 @@
+# -*- coding: utf-8 -*-
+# this file is released under public domain and you can use without limitations
+
+#########################################################################
+## This scaffolding model makes your app work on Google App Engine too
+#########################################################################
+
+if request.env.web2py_runtime_gae:            # if running on Google App Engine
+    db = DAL('google:datastore')              # connect to Google BigTable
+                                              # optional DAL('gae://namespace')
+    session.connect(request, response, db = db) # and store sessions and tickets there
+    ### or use the following lines to store sessions in Memcache
+    # from gluon.contrib.memdb import MEMDB
+    # from google.appengine.api.memcache import Client
+    # session.connect(request, response, db = MEMDB(Client()))
+else:                                         # else use a normal relational database
+    db = DAL('sqlite://storage.sqlite')       # if not, use SQLite or other DB
+
+# by default give a view/generic.extension to all actions from localhost
+# none otherwise. a pattern can be 'controller/function.extension'
+response.generic_patterns = ['*'] if request.is_local else []
+
+#########################################################################
+## Here is sample code if you need for
+## - email capabilities
+## - authentication (registration, login, logout, ... )
+## - authorization (role based authorization)
+## - services (xml, csv, json, xmlrpc, jsonrpc, amf, rss)
+## - crud actions
+## (more options discussed in gluon/tools.py)
+#########################################################################
+
+from gluon.tools import Mail, Auth, Crud, Service, PluginManager, prettydate
+mail = Mail()                                  # mailer
+auth = Auth(db)                                # authentication/authorization
+crud = Crud(db)                                # for CRUD helpers using auth
+service = Service()                            # for json, xml, jsonrpc, xmlrpc, amfrpc
+plugins = PluginManager()                      # for configuring plugins
+
+mail.settings.server = 'logging' or 'smtp.gmail.com:587'  # your SMTP server
+mail.settings.sender = 'you@gmail.com'         # your email
+mail.settings.login = 'username:password'      # your credentials or None
+
+auth.settings.hmac_key = ''   # before define_tables()
+auth.define_tables()                           # creates all needed tables
+auth.settings.mailer = mail                    # for user email verification
+auth.settings.registration_requires_verification = False
+auth.settings.registration_requires_approval = False
+auth.messages.verify_email = 'Click on the link http://'+request.env.http_host+URL('default','user',args=['verify_email'])+'/%(key)s to verify your email'
+auth.settings.reset_password_requires_verification = True
+auth.messages.reset_password = 'Click on the link http://'+request.env.http_host+URL('default','user',args=['reset_password'])+'/%(key)s to reset your password'
+
+#########################################################################
+## If you need to use OpenID, Facebook, MySpace, Twitter, Linkedin, etc.
+## register with janrain.com, uncomment and customize following
+# from gluon.contrib.login_methods.rpx_account import RPXAccount
+# auth.settings.actions_disabled = \
+#    ['register','change_password','request_reset_password']
+# auth.settings.login_form = RPXAccount(request, api_key='...',domain='...',
+#    url = "http://localhost:8000/%s/default/user/login" % request.application)
+## other login methods are in gluon/contrib/login_methods
+#########################################################################
+
+crud.settings.auth = None        # =auth to enforce authorization on crud
+
+#########################################################################
+## Define your tables below (or better in another model file) for example
+##
+## >>> db.define_table('mytable',Field('myfield','string'))
+##
+## Fields can be 'string','text','password','integer','double','boolean'
+##       'date','time','datetime','blob','upload', 'reference TABLENAME'
+## There is an implicit 'id integer autoincrement' field
+## Consult manual for more options, validators, etc.
+##
+## More API examples for controllers:
+##
+## >>> db.mytable.insert(myfield='value')
+## >>> rows=db(db.mytable.myfield=='value').select(db.mytable.ALL)
+## >>> for row in rows: print row.id, row.myfield
+#########################################################################

ADDED   applications/welcome/models/menu.py
Index: applications/welcome/models/menu.py
==================================================================
--- /dev/null
+++ applications/welcome/models/menu.py
@@ -0,0 +1,126 @@
+# -*- coding: utf-8 -*-
+# this file is released under public domain and you can use without limitations
+#########################################################################
+## Customize your APP title, subtitle and menus here
+#########################################################################
+
+response.title = request.application
+response.subtitle = T('customize me!')
+
+#http://dev.w3.org/html5/markup/meta.name.html
+response.meta.author = 'you'
+response.meta.description = 'Free and open source full-stack enterprise framework for agile development of fast, scalable, secure and portable database-driven web-based applications. Written and programmable in Python'
+response.meta.keywords = 'web2py, python, framework'
+response.meta.generator = 'Web2py Enterprise Framework'
+response.meta.copyright = 'Copyright 2007-2010'
+
+
+##########################################
+## this is the main application menu
+## add/remove items as required
+##########################################
+
+response.menu = [
+    (T('Home'), False, URL('default','index'), [])
+    ]
+
+##########################################
+## this is here to provide shortcuts
+## during development. remove in production
+##
+## mind that plugins may also affect menu
+##########################################
+
+#########################################
+## Make your own menus
+##########################################
+
+response.menu+=[
+    (T('This App'), False, URL('admin', 'default', 'design/%s' % request.application),
+     [
+            (T('Controller'), False,
+             URL('admin', 'default', 'edit/%s/controllers/%s.py' \
+                     % (request.application,request.controller=='appadmin' and
+                        'default' or request.controller))),
+            (T('View'), False,
+             URL('admin', 'default', 'edit/%s/views/%s' \
+                     % (request.application,response.view))),
+            (T('Layout'), False,
+             URL('admin', 'default', 'edit/%s/views/layout.html' \
+                     % request.application)),
+            (T('Stylesheet'), False,
+             URL('admin', 'default', 'edit/%s/static/base.css' \
+                     % request.application)),
+            (T('DB Model'), False,
+             URL('admin', 'default', 'edit/%s/models/db.py' \
+                     % request.application)),
+            (T('Menu Model'), False,
+             URL('admin', 'default', 'edit/%s/models/menu.py' \
+                     % request.application)),
+            (T('Database'), False,
+             URL(request.application, 'appadmin', 'index')),
+
+            (T('Errors'), False,
+             URL('admin', 'default', 'errors/%s' \
+                     % request.application)),
+
+            (T('About'), False,
+             URL('admin', 'default', 'about/%s' \
+                     % request.application)),
+
+            ]
+   )]
+
+
+##########################################
+## this is here to provide shortcuts to some resources
+## during development. remove in production
+##
+## mind that plugins may also affect menu
+##########################################
+
+
+response.menu+=[(T('Resources'), False, None,
+     [
+    (T('Documentation'), False, 'http://www.web2py.com/book',
+        [
+        (T('Preface'), False, 'http://www.web2py.com/book/default/chapter/00'),
+        (T('Introduction'), False, 'http://www.web2py.com/book/default/chapter/01'),
+        (T('Python'), False, 'http://www.web2py.com/book/default/chapter/02'),
+        (T('Overview'), False, 'http://www.web2py.com/book/default/chapter/03'),
+        (T('The Core'), False, 'http://www.web2py.com/book/default/chapter/04'),
+        (T('The Views'), False, 'http://www.web2py.com/book/default/chapter/05'),
+        (T('Database'), False, 'http://www.web2py.com/book/default/chapter/06'),
+        (T('Forms and Validators'), False, 'http://www.web2py.com/book/default/chapter/07'),
+        (T('Access Control'), False, 'http://www.web2py.com/book/default/chapter/08'),
+        (T('Services'), False, 'http://www.web2py.com/book/default/chapter/09'),
+        (T('Ajax Recipes'), False, 'http://www.web2py.com/book/default/chapter/10'),
+        (T('Deployment Recipes'), False, 'http://www.web2py.com/book/default/chapter/11'),
+        (T('Other Recipes'), False, 'http://www.web2py.com/book/default/chapter/12'),
+        (T('Buy this book'), False, 'http://stores.lulu.com/web2py'),
+        ]),
+
+    (T('Community'), False, None,
+        [
+        (T('Groups'), False, 'http://www.web2py.com/examples/default/usergroups'),
+        (T('Twitter'), False, 'http://twitter.com/web2py'),
+        (T('Live chat'), False, 'http://mibbit.com/?channel=%23web2py&server=irc.mibbit.net'),
+        (T('User Voice'), False, 'http://web2py.uservoice.com/'),
+        ]),
+
+    (T('Web2py'), False, 'http://www.web2py.com',
+        [
+        (T('Download'), False, 'http://www.web2py.com/examples/default/download'),
+        (T('Support'), False, 'http://www.web2py.com/examples/default/support'),
+        (T('Quick Examples'), False, 'http://web2py.com/examples/default/examples'),
+        (T('FAQ'), False, 'http://web2py.com/AlterEgo'),
+        (T('Free Applications'), False, 'http://web2py.com/appliances'),
+        (T('Plugins'), False, 'http://web2py.com/plugins'),
+        (T('Recipes'), False, 'http://web2pyslices.com/'),
+        (T('Demo'), False, 'http://web2py.com/demo_admin'),
+        (T('Semantic'), False, 'http://web2py.com/semantic'),
+        (T('Layouts'), False, 'http://web2py.com/layouts'),
+        (T('Videos'), False, 'http://www.web2py.com/examples/default/videos/'),
+        ]),
+    ]
+   )]

ADDED   applications/welcome/modules/__init__.py
Index: applications/welcome/modules/__init__.py
==================================================================
--- /dev/null
+++ applications/welcome/modules/__init__.py

ADDED   applications/welcome/static/css/base.css
Index: applications/welcome/static/css/base.css
==================================================================
--- /dev/null
+++ applications/welcome/static/css/base.css
@@ -0,0 +1,556 @@
+@charset "UTF-8";
+
+/* This file is contains the following sections:
+
+Update: Revision: 20101102 by Martin Mulone
+
+- The new revision contains:
+- Html5, good practice and normalization support.
+- Diferent hacks.
+- The normalization and some tags come from
+  diferent sites so i keep the credits and comments.
+  but the base of support html5 come from:
+  http://html5boilerplate.com/
+
+- ez.css (http://www.ez-css.org/layouts)
+- reset common tags
+- choose default fonts
+- choose link style
+- add bottom line to table rows
+- labels bold and occasionally centered
+- make all input fields the same size
+- add proper separation between h1-h6 and text
+- always indent the first line and add space below paragraphs
+- bullets and numbers style and indent
+- form and table padding
+- code blocks
+- left and right padding to quoted text
+- page layout alignment, width and padding (change this for spaces)
+- column widths (change this to use left_sidebar and right_sidebar)
+- backrgound images and colors (change this for colors)
+- web2py specific (.flash, .error)
+
+Notice:
+- even if you use a different layout/css you may need classes .flash and .error
+- this is all color neutral except for #349C01 (header, links, lines)
+- there are two backrgound images: images/background.png and images/header.png
+
+License: This file is released under BSD and MIT
+
+*/
+
+/*     
+  credit is left where credit is due.
+  additionally, much inspiration was taken from these projects:
+    yui.yahooapis.com/2.8.1/build/base/base.css
+    camendesign.com/design/
+    praegnanz.de/weblog/htmlcssjs-kickstart
+*/
+
+/* 
+  html5doctor.com Reset Stylesheet (Eric Meyer's Reset Reloaded + HTML5 baseline)
+  v1.4 2009-07-27 | Authors: Eric Meyer & Richard Clark
+  html5doctor.com/html-5-reset-stylesheet/
+*/
+
+html, body, div, span, object, iframe,
+h1, h2, h3, h4, h5, h6, p, blockquote, pre,
+abbr, address, cite, code,
+del, dfn, em, img, ins, kbd, q, samp,
+small, strong, sub, sup, var,
+b, i,
+dl, dt, dd, ol, ul, li,
+fieldset, form, label, legend,
+table, caption, tbody, tfoot, thead, tr, th, td,
+article, aside, canvas, details, figcaption, figure, 
+footer, header, hgroup, menu, nav, section, summary,
+time, mark, audio, video {
+  margin:0;
+  padding:0;
+  border:0;
+  outline:0;
+  font-size:100%;
+  vertical-align:baseline;
+  background:transparent;
+}                  
+
+article, aside, details, figcaption, figure,
+footer, header, hgroup, menu, nav, section { 
+    display:block;
+}
+
+nav ul { list-style:none; }
+
+blockquote, q { quotes:none; }
+
+blockquote:before, blockquote:after,
+q:before, q:after { content:''; content:none; }
+
+a { margin:0; padding:0; font-size:100%; vertical-align:baseline; background:transparent; }
+a:hover { text-decoration: underline }
+
+ins { background-color:#ff9; color:#000; text-decoration:none; }
+
+mark { background-color:#ff9; color:#000; font-style:italic; font-weight:bold; }
+
+del { text-decoration: line-through; }
+
+abbr[title], dfn[title] { border-bottom:1px dotted #000; cursor:help; }
+
+/* tables still need cellspacing="0" in the markup */
+table { border-collapse:collapse; border-spacing:0; }
+
+hr { display:block; height:1px; border:0; border-top:1px solid #ccc; margin:1em 0; padding:0; }
+
+input, select { vertical-align:middle; }
+/* END RESET CSS */
+
+
+/*
+fonts.css from the YUI Library: developer.yahoo.com/yui/
+          Please refer to developer.yahoo.com/yui/fonts/ for font sizing percentages
+
+There are three custom edits:
+ * remove arial, helvetica from explicit font stack
+ * make the line-height relative and unit-less
+ * remove the pre, code styles
+*/
+body { font:13px/1.231 sans-serif; *font-size:small; } /* hack retained to preserve specificity */
+
+/*table { font-size:inherit; font:100%; }*/
+
+select, input, textarea, button { font:99% sans-serif; }
+
+
+/* normalize monospace sizing 
+ * en.wikipedia.org/wiki/MediaWiki_talk:Common.css/Archive_11#Teletype_style_fix_for_Chrome
+ */
+pre, code, kbd, samp { font-family: monospace, sans-serif; }
+
+/* 
+ * minimal base styles 
+ */
+
+/* #444 looks better than black: twitter.com/H_FJ/statuses/11800719859 */ 
+body, select, input, textarea { color:#444; }
+
+/* Headers (h1,h2,etc) have no default font-size or margin,
+   you'll want to define those yourself. */ 
+ 
+/* www.aestheticallyloyal.com/public/optimize-legibility/ */ 
+h1,h2,h3,h4,h5,h6 { font-weight: bold; }
+
+/* always force a scrollbar in non-IE */ 
+html { overflow-y: scroll; }
+ 
+/* Accessible focus treatment: people.opera.com/patrickl/experiments/keyboard/test */
+a:hover, a:active { outline: none; }
+
+a, a:active, a:visited { color:#607890; }
+a:hover { color:#036; }
+
+ul, ol { margin-left: 1.8em; }
+ol { list-style-type: decimal; }
+
+/* Remove margins for navigation lists */
+nav ul, nav li { margin: 0; } 
+
+small { font-size:85%; }
+strong, th { font-weight: bold; }
+
+td, td img { vertical-align:top; } 
+
+sub { vertical-align: sub; font-size: smaller; }
+sup { vertical-align: super; font-size: smaller; }
+
+pre { 
+  padding: 15px; 
+  
+  /* www.pathf.com/blogs/2008/05/formatting-quoted-code-in-blog-posts-css21-white-space-pre-wrap/ */
+  white-space: pre; /* CSS2 */
+  white-space: pre-wrap; /* CSS 2.1 */
+  white-space: pre-line; /* CSS 3 (and 2.1 as well, actually) */
+  word-wrap: break-word; /* IE */
+}
+
+textarea { overflow: auto; } /* thnx ivannikolic! www.sitepoint.com/blogs/2010/08/20/ie-remove-textarea-scrollbars/ */
+
+.ie6 legend, .ie7 legend { margin-left: -7px; } /* thnx ivannikolic! */
+
+/* align checkboxes, radios, text inputs with their label
+   by: Thierry Koblentz tjkdesign.com/ez-css/css/base.css  */
+input[type="radio"] { vertical-align: text-bottom; }
+input[type="checkbox"] { vertical-align: bottom; }
+.ie7 input[type="checkbox"] { vertical-align: baseline; }
+.ie6 input { vertical-align: text-bottom; }
+
+/* hand cursor on clickable input elements */
+label, input[type=button], input[type=submit], button { cursor: pointer; }
+
+/* webkit browsers add a 2px margin outside the chrome of form elements */  
+button, input, select, textarea { margin: 0; }
+
+/* colors for form validity */
+input:valid, textarea:valid   {  }
+input:invalid, textarea:invalid { 
+      border-radius: 1px;
+    -moz-box-shadow: 0px 0px 5px red; 
+ -webkit-box-shadow: 0px 0px 5px red; 
+         box-shadow: 0px 0px 5px red;
+}
+.no-boxshadow input:invalid, 
+.no-boxshadow textarea:invalid { background-color: #f0dddd; }
+
+
+/* These selection declarations have to be separate.
+   No text-shadow: twitter.com/miketaylr/status/12228805301 
+   Also: hot pink. */
+::-moz-selection{ background: #555; color:#fff; text-shadow: none; }
+::selection { background:#555; color:#fff; text-shadow: none; } 
+
+/*  j.mp/webkit-tap-highlight-color */
+a:link { -webkit-tap-highlight-color: #555; } 
+
+
+/* make buttons play nice in IE:    
+   www.viget.com/inspire/styling-the-button-element-in-internet-explorer/ */
+button {  width: auto; overflow: visible; }
+ 
+/* bicubic resizing for non-native sized IMG: 
+   code.flickr.com/blog/2008/11/12/on-ui-quality-the-little-things-client-side-image-resizing/ */
+.ie7 img { -ms-interpolation-mode: bicubic; }
+
+/* 
+ * Non-semantic helper classes 
+ */
+
+/* for image replacement */
+.ir { display:block; text-indent:-999em; overflow:hidden; background-repeat: no-repeat; }
+
+/* Hide for both screenreaders and browsers
+   css-discuss.incutio.com/wiki/Screenreader_Visibility */
+.hidden { display:none; } 
+
+/* Hide only visually, but have it available for screenreaders 
+   www.webaim.org/techniques/css/invisiblecontent/ 
+   Solution from: j.mp/visuallyhidden - Thanks Jonathan Neal! */
+.visuallyhidden { position:absolute !important;    
+  clip: rect(1px 1px 1px 1px); /* IE6, IE7 */
+  clip: rect(1px, 1px, 1px, 1px); }
+
+/* Hide visually and from screenreaders, but maintain layout */
+.invisible { visibility: hidden; }
+
+/* >> The Magnificent CLEARFIX: Updated to prevent margin-collapsing on child elements << j.mp/bestclearfix */
+.clearfix:before, .clearfix:after {
+  content: "\0020"; display: block; height: 0; visibility: hidden;    
+} 
+
+.clearfix:after { clear: both; }
+/* Fix clearfix: blueprintcss.lighthouseapp.com/projects/15318/tickets/5-extra-margin-padding-bottom-of-page */
+.clearfix { zoom: 1; }
+
+
+/*********** layout info (ez.css) ***********/
+/* 2009 -2010 (c) | ez-css.org
+ * ez-plug-min.css :: version 1.1 :: 01182010
+ */
+.ez-wr:after,.ez-box:after{content:".";display:block;height:0;clear:both;visibility:hidden}.ez-wr,.ez-box,.ez-last{display:inline-block;min-height:0}/* \*/ * html .ez-wr,* html .ez-box,* html .ez-last{height:1%}.ez-wr,.ez-box,.ez-last{display:block}/* */.ez-oh{overflow:hidden}* html .ez-oh{overflow:visible}.ez-oa{overflow:auto}.ez-dt{display:table}.ez-it{display:inline-table}.ez-tc{display:table-cell}.ez-ib{display:inline-block}.ez-fl{float:left}* html .ez-fl{margin-right:-3px}.ez-fr{float:right}* html .ez-fr{margin-left:-3px}.ez-25{width:25%}.ez-33{width:33.33%}.ez-50{width:50%}.ez-66{width:66.66%}.ez-75{width:75%}.ez-negmr{margin-right:-1px}* html .ez-negmr{margin-right:-4px}.ez-negmx{margin-right:-1px}.ez-negml{margin-left:-1px}* html .ez-negml{margin-left:-4px}
+
+
+/*********** add bottom line to table rows ***********/
+th, td { padding: 0.1em 0.5em 0.1em 0.5em;}
+
+/*********** labels bold and occasionally centered ***********/
+label {
+    white-space: nowrap;
+}
+label, b, th {
+    font-weight: bold;
+}
+thead th {
+    text-align: center;
+    border-bottom: 1px solid #444;
+}
+/*********** forms and table padding ***********/
+form, table {
+   padding: 5px 10px 5px 10px;
+}
+
+/*********** code blocks ***********/
+code {
+   padding: 3px 5px;
+   font-family: Andale Mono, monospace;
+   font-size: 0.9em;
+}
+
+/*********** left and right padding to quoted text ***********/
+blockquote {
+   background: #cccccc;
+   border-left: 30px transparent;
+   border-right: 30px transparent;
+   /*padding: 5px;*/
+}
+
+input[type=text], input[type=password], textarea, select {
+    margin: 2px 15px 2px 5px;
+    width: 280px;      
+    background: #fff;
+    color: #555;
+    border: 1px solid #dedede; 
+    -moz-border-radius: 2px;
+    -webkit-border-radius: 2px;
+    border-radius: 2px;       
+    font-size: 12px;
+}
+
+input[type=text], input[type=password] {
+    height: 16px;  
+}
+
+select[multiple=multiple] {
+    height: 90px;  
+}
+
+input[type=submit], input[type=button], button {
+    margin: 0px;
+    /*width: 85px;*/
+    height: 22px;    
+    background: #eaeaea;
+    color: #555;
+    border: 1px solid #dedede;
+    -moz-border-radius: 2px;
+    -webkit-border-radius: 2px;
+    border-radius: 2px;    
+}
+
+fieldset { border: 1px solid #dedede; padding: 6px; }
+legend { font-weight: bold; }
+
+input:focus, textarea:focus { background: #fafafa; }
+
+p {text-indent:30px;}
+
+p, blockquote {    
+    margin-bottom: 10px;
+}
+
+h1,h2,h3,h4,h5,h6 { line-height: 170%; }
+h1 {font-size: 2.0em;}
+h2 {font-size: 1.8em;}
+h3 {font-size: 1.4em;}
+h4 {font-size: 1.2em;}
+h5 {font-size: 1.0em;}
+h6 {font-size: 0.8em;}
+
+/*********** page layout alignment, width and padding ***********/
+/*body {background-color: #000;}*/
+#container, #header, #page, #content, #statusbar,
+#footer, #wrapper { display:block; line-height: 170%; }
+#wrapper {width: 900px;}
+#container {
+    margin: 0 auto;
+    padding: 0;
+}
+#wrapper {margin: 0 auto;} 
+#wrapper {background-color: #fff; padding: 5px;} 
+#statusbar { margin: 5px 0px 20px 0px;}
+#footer {    
+    margin-top: 30px;    
+    padding: 5px;    
+}
+#statusbar, #footer {    
+    background: #eaeaea; 
+    border-top: 1px #aaa solid;    
+}
+#logo {
+    width: 68px;
+    height: 62px;
+    background: url(../images/logo.png);
+}
+#appname {
+    color: #cccccc;
+}
+
+#right_sidebar { width: 160px; float:right; display: none; }
+#left_sidebar { width: 160px; float:left; display: none; }
+#content { float: left; /*width: 740px;*//*width: 63%;*/ /*width: 640px; float:left;*/ } /* uncomment this if you are going to use sidebars */
+ 
+.auth_navbar {
+   top: 0px;
+   float: right;
+   padding: 3px 10px 3px 10px; 
+}
+
+/*********** web2py specific ***********/
+div.flash {
+    font-weight: bold;
+    display: none;
+    position: fixed;    
+    padding: 10px;
+    top: 40px;
+    right: 10px;
+    min-width: 280px;
+    opacity: 0.85;
+    margin: 0px 0px 10px 10px;    
+    color: #fff;    
+    vertical-align: middle;
+    cursor: pointer;
+    background: #000;
+    border: 2px solid #fff;
+    -moz-border-radius: 5px;
+    -webkit-border-radius: 5px;
+    z-index: 2;
+}
+div.error {
+    background-color: red;
+    color: white;
+    padding: 3px;
+}
+
+/***************************
+ * CSS 3 Buttons
+ * http://github.com/michenriksen/css3buttons
+ * created by Michael Henriksen
+ * License: Unlicense 
+ * 
+ * *******************/
+
+a.button { display: inline-block; padding: 3px 5px 3px 5px; font-family: 'lucida grande', tahoma, verdana, arial, sans-serif; font-size: 12px; color: #3C3C3D; text-shadow: 1px 1px 0 #FFFFFF; background: #ECECEC url('../images/css3buttons_backgrounds.png') 0 0 no-repeat; white-space: nowrap; overflow: visible; cursor: pointer; text-decoration: none; border: 1px solid #CACACA; -webkit-border-radius: 2px; -moz-border-radius: 2px; -webkit-background-clip: padding-box; border-radius: 2px; outline: none; position: relative; zoom: 1; *display: inline; }
+a.button.primary { font-weight: bold }
+a.button:hover { color: #FFFFFF; border-color: #388AD4; text-decoration: none; text-shadow: -1px -1px 0 rgba(0,0,0,0.3); background-position: 0 -40px; background-color: #2D7DC5; }
+a.button:active,
+a.button.active { background-position: 0 -81px; border-color: #347BBA; background-color: #0F5EA2; color: #FFFFFF; text-shadow: none; }
+a.button:active { top: 1px }
+a.button.negative:hover { color: #FFFFFF; background-position: 0 -121px; background-color: #D84743; border-color: #911D1B; }
+a.button.negative:active,
+a.button.negative.active { background-position: 0 -161px; background-color: #A5211E; border-color: #911D1B; }
+a.button.pill { -webkit-border-radius: 19px; -moz-border-radius: 19px; border-radius: 19px; padding: 2px 10px 2px 10px; }
+a.button.left { -webkit-border-bottom-right-radius: 0px; -webkit-border-top-right-radius: 0px; -moz-border-radius-bottomright: 0px; -moz-border-radius-topright: 0px; border-bottom-right-radius: 0px; border-top-right-radius: 0px; margin-right: 0px; }
+a.button.middle { margin-right: 0px; margin-left: 0px; -webkit-border-radius: 0px; -moz-border-radius: 0px; border-radius: 0px; border-right: none; border-left: none; }
+a.button.right { -webkit-border-bottom-left-radius: 0px; -webkit-border-top-left-radius: 0px; -moz-border-radius-bottomleft: 0px; -moz-border-radius-topleft: 0px; border-top-left-radius: 0px; border-bottom-left-radius: 0px; margin-left: 0px; }
+a.button.left:active,
+a.button.middle:active,
+a.button.right:active { top: 0px }
+a.button.big { font-size: 16px; padding-left: 17px; padding-right: 17px; }
+a.button span.icon { display: inline-block; width: 14px; height: 12px; margin: auto 7px auto auto; position: relative; top: 2px; background-image: url('../images/css3buttons_icons.png'); background-repeat: no-repeat; }
+a.big.button span.icon { top: 0px }
+a.button span.icon.book { background-position: 0 0 }
+a.button:hover span.icon.book { background-position: 0 -15px }
+a.button span.icon.calendar { background-position: 0 -30px }
+a.button:hover span.icon.calendar { background-position: 0 -45px }
+a.button span.icon.chat { background-position: 0 -60px }
+a.button:hover span.icon.chat { background-position: 0 -75px }
+a.button span.icon.check { background-position: 0 -90px }
+a.button:hover span.icon.check { background-position: 0 -103px }
+a.button span.icon.clock { background-position: 0 -116px }
+a.button:hover span.icon.clock { background-position: 0 -131px }
+a.button span.icon.cog { background-position: 0 -146px }
+a.button:hover span.icon.cog { background-position: 0 -161px }
+a.button span.icon.comment { background-position: 0 -176px }
+a.button:hover span.icon.comment { background-position: 0 -190px }
+a.button span.icon.cross { background-position: 0 -204px }
+a.button:hover span.icon.cross { background-position: 0 -219px }
+a.button span.icon.downarrow { background-position: 0 -234px }
+a.button:hover span.icon.downarrow { background-position: 0 -249px }
+a.button span.icon.fork { background-position: 0 -264px }
+a.button:hover span.icon.fork { background-position: 0 -279px }
+a.button span.icon.heart { background-position: 0 -294px }
+a.button:hover span.icon.heart { background-position: 0 -308px }
+a.button span.icon.home { background-position: 0 -322px }
+a.button:hover span.icon.home { background-position: 0 -337px }
+a.button span.icon.key { background-position: 0 -352px }
+a.button:hover span.icon.key { background-position: 0 -367px }
+a.button span.icon.leftarrow { background-position: 0 -382px }
+a.button:hover span.icon.leftarrow { background-position: 0 -397px }
+a.button span.icon.lock { background-position: 0 -412px }
+a.button:hover span.icon.lock { background-position: 0 -427px }
+a.button span.icon.loop { background-position: 0 -442px }
+a.button:hover span.icon.loop { background-position: 0 -457px }
+a.button span.icon.magnifier { background-position: 0 -472px }
+a.button:hover span.icon.magnifier { background-position: 0 -487px }
+a.button span.icon.mail { background-position: 0 -502px }
+a.button:hover span.icon.mail { background-position: 0 -514px }
+a.button span.icon.move { background-position: 0 -526px }
+a.button:hover span.icon.move { background-position: 0 -541px }
+a.button span.icon.pen { background-position: 0 -556px }
+a.button:hover span.icon.pen { background-position: 0 -571px }
+a.button span.icon.pin { background-position: 0 -586px }
+a.button:hover span.icon.pin { background-position: 0 -601px }
+a.button span.icon.plus { background-position: 0 -616px }
+a.button:hover span.icon.plus { background-position: 0 -631px }
+a.button span.icon.reload { background-position: 0 -646px }
+a.button:hover span.icon.reload { background-position: 0 -660px }
+a.button span.icon.rightarrow { background-position: 0 -674px }
+a.button:hover span.icon.rightarrow { background-position: 0 -689px }
+a.button span.icon.rss { background-position: 0 -704px }
+a.button:hover span.icon.rss { background-position: 0 -719px }
+a.button span.icon.tag { background-position: 0 -734px }
+a.button:hover span.icon.tag { background-position: 0 -749px }
+a.button span.icon.trash { background-position: 0 -764px }
+a.button:hover span.icon.trash { background-position: 0 -779px }
+a.button span.icon.unlock { background-position: 0 -794px }
+a.button:hover span.icon.unlock { background-position: 0 -809px }
+a.button span.icon.uparrow { background-position: 0 -824px }
+a.button:hover span.icon.uparrow { background-position: 0 -839px }
+a.button span.icon.user { background-position: 0 -854px }
+a.button:hover span.icon.user { background-position: 0 -869px }
+
+
+
+
+
+
+/*****************************************************
+ *  HERE YOU CAN START TO WRITE YOUR OWN DIVS
+ */
+
+
+
+
+
+
+
+/*
+ * Media queries for responsive design
+ */
+
+@media all and (orientation:portrait) { 
+  /* Style adjustments for portrait mode goes here */
+  
+}
+
+@media all and (orientation:landscape) { 
+  /* Style adjustments for landscape mode goes here */
+  
+}
+
+/* Grade-A Mobile Browsers (Opera Mobile, iPhone Safari, Android Chrome)  
+   Consider this: www.cloudfour.com/css-media-query-for-mobile-is-fools-gold/ */
+@media screen and (max-device-width: 480px) {
+  
+  
+  /* Uncomment if you don't want iOS and WinMobile to mobile-optimize the text for you
+     j.mp/textsizeadjust 
+  html { -webkit-text-size-adjust:none; -ms-text-size-adjust:none; } */
+}
+
+
+/* 
+ * print styles
+ * inlined to avoid required HTTP connection www.phpied.com/delay-loading-your-print-css/ 
+ */
+@media print {
+  * { background: transparent !important; color: #444 !important; text-shadow: none !important; }
+  a, a:visited { color: #444 !important; text-decoration: underline; }
+  a:after { content: " (" attr(href) ")"; } 
+  abbr:after { content: " (" attr(title) ")"; }
+  .ir a:after { content: ""; }  /* Don't show links for images */
+  pre, blockquote { border: 1px solid #999; page-break-inside: avoid; }
+  thead { display: table-header-group; } /* css-discuss.incutio.com/wiki/Printing_Tables */ 
+  tr, img { page-break-inside: avoid; }
+  @page { margin: 0.5cm; }
+  p, h2, h3 { orphans: 3; widows: 3; }
+  h2, h3{ page-break-after: avoid; }
+}
+

ADDED   applications/welcome/static/css/calendar.css
Index: applications/welcome/static/css/calendar.css
==================================================================
--- /dev/null
+++ applications/welcome/static/css/calendar.css
@@ -0,0 +1,1 @@
+.calendar{z-index:99;position:relative;display:none;border-top:2px solid #fff;border-right:2px solid #000;border-bottom:2px solid #000;border-left:2px solid #fff;font-size:11px;color:#000;cursor:default;background:#d4d0c8;font-family:tahoma,verdana,sans-serif;}.calendar table{border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;font-size:11px;color:#000;cursor:default;background:#d4d0c8;font-family:tahoma,verdana,sans-serif;}.calendar .button{text-align:center;padding:1px;border-top:1px solid #fff;border-right:1px solid #000;border-bottom:1px solid #000;border-left:1px solid #fff;}.calendar .nav{background:transparent}.calendar thead .title{font-weight:bold;padding:1px;border:1px solid #000;background:#848078;color:#fff;text-align:center;}.calendar thead .name{border-bottom:1px solid #000;padding:2px;text-align:center;background:#f4f0e8;}.calendar thead .weekend{color:#f00;}.calendar thead .hilite{border-top:2px solid #fff;border-right:2px solid #000;border-bottom:2px solid #000;border-left:2px solid #fff;padding:0;background-color:#e4e0d8;}.calendar thead .active{padding:2px 0 0 2px;border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;background-color:#c4c0b8;}.calendar tbody .day{width:2em;text-align:right;padding:2px 4px 2px 2px;}.calendar tbody .day.othermonth{font-size:80%;color:#aaa;}.calendar tbody .day.othermonth.oweekend{color:#faa;}.calendar table .wn{padding:2px 3px 2px 2px;border-right:1px solid #000;background:#f4f0e8;}.calendar tbody .rowhilite td{background:#e4e0d8;}.calendar tbody .rowhilite td.wn{background:#d4d0c8;}.calendar tbody td.hilite{padding:1px 3px 1px 1px;border-top:1px solid #fff;border-right:1px solid #000;border-bottom:1px solid #000;border-left:1px solid #fff;}.calendar tbody td.active{padding:2px 2px 0 2px;border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;}.calendar tbody td.selected{font-weight:bold;border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;padding:2px 2px 0 2px;background:#e4e0d8;}.calendar tbody td.weekend{color:#f00;}.calendar tbody td.today{font-weight:bold;color:#00f;}.calendar tbody .disabled{color:#999;}.calendar tbody .emptycell{visibility:hidden;}.calendar tbody .emptyrow{display:none;}.calendar tfoot .ttip{background:#f4f0e8;padding:1px;border:1px solid #000;background:#848078;color:#fff;text-align:center;}.calendar tfoot .hilite{border-top:1px solid #fff;border-right:1px solid #000;border-bottom:1px solid #000;border-left:1px solid #fff;padding:1px;background:#e4e0d8;}.calendar tfoot .active{padding:2px 0 0 2px;border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;}.calendar .combo{position:absolute;display:none;width:4em;top:0;left:0;cursor:default;border-top:1px solid #fff;border-right:1px solid #000;border-bottom:1px solid #000;border-left:1px solid #fff;background:#e4e0d8;font-size:90%;padding:1px;z-index:100;}.calendar .combo .label,.calendar .combo .label-IEfix{text-align:center;padding:1px;}.calendar .combo .label-IEfix{width:4em;}.calendar .combo .active{background:#c4c0b8;padding:0;border-top:1px solid #000;border-right:1px solid #fff;border-bottom:1px solid #fff;border-left:1px solid #000;}.calendar .combo .hilite{background:#048;color:#fea;}.calendar td.time{border-top:1px solid #000;padding:1px 0;text-align:center;background-color:#f4f0e8;}.calendar td.time .hour,.calendar td.time .minute,.calendar td.time .ampm{padding:0 3px 0 4px;border:1px solid #889;font-weight:bold;background-color:#fff;}.calendar td.time .ampm{text-align:center;}.calendar td.time .colon{padding:0 2px 0 3px;font-weight:bold;}.calendar td.time span.hilite{border-color:#000;background-color:#766;color:#fff;}.calendar td.time span.active{border-color:#f00;background-color:#000;color:#0f0;}#CP_hourcont{z-index:99;padding:0;position:absolute;border:1px dashed #666;background-color:#eee;display:none;}#CP_minutecont{z-index:99;background-color:#ddd;padding:1px;position:absolute;width:45px;display:none;}.floatleft{float:left;}.CP_hour{z-index:99;padding:1px;font-family:Arial,Helvetica,sans-serif;font-size:9px;white-space:nowrap;cursor:pointer;width:35px;}.CP_minute{z-index:99;padding:1px;font-family:Arial,Helvetica,sans-serif;font-size:9px;white-space:nowrap;cursor:pointer;width:auto;}.CP_over{background-color:#fff;z-index:99}

ADDED   applications/welcome/static/css/handheld.css
Index: applications/welcome/static/css/handheld.css
==================================================================
--- /dev/null
+++ applications/welcome/static/css/handheld.css
@@ -0,0 +1,7 @@
+
+* {
+  float: none;       /* Screens are not big enough to account for floats */
+  font-size: 80%;    /* Slightly reducing font size to reduce need to scroll */ 
+  background: #fff;  /*  As much contrast as possible */
+  color: #000;
+}

ADDED   applications/welcome/static/css/superfish-navbar.css
Index: applications/welcome/static/css/superfish-navbar.css
==================================================================
--- /dev/null
+++ applications/welcome/static/css/superfish-navbar.css
@@ -0,0 +1,93 @@
+
+/*** adding the class sf-navbar in addition to sf-menu creates an all-horizontal nav-bar menu ***/
+.sf-navbar {
+	background:		#BDD2FF;
+	height:			2.5em;
+	padding-bottom:	2.5em;
+	position:		relative;
+}
+.sf-navbar li {
+	background:		#AABDE6;
+	position:		static;
+}
+.sf-navbar a {
+	border-top:		none;
+}
+.sf-navbar li ul {
+	width:			44em; /*IE6 soils itself without this*/
+}
+.sf-navbar li li {
+	background:		#BDD2FF;
+	position:		relative;
+}
+.sf-navbar li li ul {
+	width:			13em;
+}
+.sf-navbar li li li {
+	width:			100%;
+}
+.sf-navbar ul li {
+	width:			auto;
+	float:			left;
+}
+.sf-navbar a, .sf-navbar a:visited {
+	border:			none;
+}
+.sf-navbar li.current {
+	background:		#BDD2FF;
+}
+.sf-navbar li:hover,
+.sf-navbar li.sfHover,
+.sf-navbar li li.current,
+.sf-navbar a:focus, .sf-navbar a:hover, .sf-navbar a:active {
+	background:		#BDD2FF;
+}
+.sf-navbar ul li:hover,
+.sf-navbar ul li.sfHover,
+ul.sf-navbar ul li:hover li,
+ul.sf-navbar ul li.sfHover li,
+.sf-navbar ul a:focus, .sf-navbar ul a:hover, .sf-navbar ul a:active {
+	background:		#D1DFFF;
+}
+ul.sf-navbar li li li:hover,
+ul.sf-navbar li li li.sfHover,
+.sf-navbar li li.current li.current,
+.sf-navbar ul li li a:focus, .sf-navbar ul li li a:hover, .sf-navbar ul li li a:active {
+	background:		#E6EEFF;
+}
+ul.sf-navbar .current ul,
+ul.sf-navbar ul li:hover ul,
+ul.sf-navbar ul li.sfHover ul {
+	left:			0;
+	top:			2.5em; /* match top ul list item height */
+}
+ul.sf-navbar .current ul ul {
+	top: 			-999em;
+}
+
+.sf-navbar li li.current > a {
+	font-weight:	bold;
+}
+
+/*** point all arrows down ***/
+/* point right for anchors in subs */
+.sf-navbar ul .sf-sub-indicator { background-position: -10px -100px; }
+.sf-navbar ul a > .sf-sub-indicator { background-position: 0 -100px; }
+/* apply hovers to modern browsers */
+.sf-navbar ul a:focus > .sf-sub-indicator,
+.sf-navbar ul a:hover > .sf-sub-indicator,
+.sf-navbar ul a:active > .sf-sub-indicator,
+.sf-navbar ul li:hover > a > .sf-sub-indicator,
+.sf-navbar ul li.sfHover > a > .sf-sub-indicator {
+	background-position: -10px -100px; /* arrow hovers for modern browsers*/
+}
+
+/*** remove shadow on first submenu ***/
+.sf-navbar > li > ul {
+	background: transparent;
+	padding: 0;
+	-moz-border-radius-bottomleft: 0;
+	-moz-border-radius-topright: 0;
+	-webkit-border-top-right-radius: 0;
+	-webkit-border-bottom-left-radius: 0;
+}

ADDED   applications/welcome/static/css/superfish-vertical.css
Index: applications/welcome/static/css/superfish-vertical.css
==================================================================
--- /dev/null
+++ applications/welcome/static/css/superfish-vertical.css
@@ -0,0 +1,23 @@
+/*** adding sf-vertical in addition to sf-menu creates a vertical menu ***/
+.sf-vertical, .sf-vertical li {
+	width:	10em;
+}
+/* this lacks ul at the start of the selector, so the styles from the main CSS file override it where needed */
+.sf-vertical li:hover ul,
+.sf-vertical li.sfHover ul {
+	left:	10em; /* match ul width */
+	top:	0;
+}
+
+/*** alter arrow directions ***/
+.sf-vertical .sf-sub-indicator { background-position: -10px 0; } /* IE6 gets solid image only */
+.sf-vertical a > .sf-sub-indicator { background-position: 0 0; } /* use translucent arrow for modern browsers*/
+
+/* hover arrow direction for modern browsers*/
+.sf-vertical a:focus > .sf-sub-indicator,
+.sf-vertical a:hover > .sf-sub-indicator,
+.sf-vertical a:active > .sf-sub-indicator,
+.sf-vertical li:hover > a > .sf-sub-indicator,
+.sf-vertical li.sfHover > a > .sf-sub-indicator {
+	background-position: -10px 0; /* arrow hovers for modern browsers*/
+}

ADDED   applications/welcome/static/css/superfish.css
Index: applications/welcome/static/css/superfish.css
==================================================================
--- /dev/null
+++ applications/welcome/static/css/superfish.css
@@ -0,0 +1,139 @@
+
+/*** ESSENTIAL STYLES ***/
+.sf-menu, .sf-menu * {
+	margin:			0;
+	padding:		0;
+	list-style:		none;
+}
+.sf-menu {
+	line-height:	1.0;
+}
+.sf-menu ul {
+	position:		absolute;
+	top:			-999em;
+	width:			10em; /* left offset of submenus need to match (see below) */
+}
+.sf-menu ul li {
+	width:			100%;
+}
+.sf-menu li:hover {
+	visibility:		inherit; /* fixes IE7 'sticky bug' */
+}
+.sf-menu li {
+	float:			left;
+	position:		relative;
+}
+.sf-menu a {
+	display:		block;
+	position:		relative;
+}
+.sf-menu li:hover ul,
+.sf-menu li.sfHover ul {
+	left:			0;
+	top:			2.5em; /* match top ul list item height */
+	z-index:		99;
+}
+ul.sf-menu li:hover li ul,
+ul.sf-menu li.sfHover li ul {
+	top:			-999em;
+}
+ul.sf-menu li li:hover ul,
+ul.sf-menu li li.sfHover ul {
+	left:			10em; /* match ul width */
+	top:			0;
+}
+ul.sf-menu li li:hover li ul,
+ul.sf-menu li li.sfHover li ul {
+	top:			-999em;
+}
+ul.sf-menu li li li:hover ul,
+ul.sf-menu li li li.sfHover ul {
+	left:			10em; /* match ul width */
+	top:			0;
+}
+
+/*** DEMO SKIN ***/
+.sf-menu {
+	float:			left;
+	/*margin-bottom:	1em;*/
+}
+.sf-menu a {
+	border-left:	1px solid #fff;
+	/*border-top:		1px solid #CFDEFF;*/
+	padding: 		.75em 1em;
+	text-decoration:none;
+}
+.sf-menu a, .sf-menu a:visited  { /* visited pseudo selector so IE6 applies text colour*/
+	color: #275b90;/*#13a;*/
+}
+.sf-menu li {
+	background: #dadada;/*#BDD2FF;*/
+}
+.sf-menu li li {
+	background:		#AABDE6;
+}
+.sf-menu li li a {
+	/*color: #13a;*/
+}
+.sf-menu li li li {
+	background:		#9AAEDB;
+}
+.sf-menu li:hover, .sf-menu li.sfHover,
+.sf-menu a:focus, .sf-menu a:hover, .sf-menu a:active {
+	background:		#CFDEFF;
+	outline:		0;
+}
+
+/*** arrows **/
+.sf-menu a.sf-with-ul {
+	padding-right: 	2.25em;
+	min-width:		1px; /* trigger IE7 hasLayout so spans position accurately */
+}
+.sf-sub-indicator {
+	position:		absolute;
+	display:		block;
+	right:			.75em;
+	top:			1.05em; /* IE6 only */
+	width:			10px;
+	height:			10px;
+	text-indent: 	-999em;
+	overflow:		hidden;
+	background:		url('../images/arrows-ffffff.png') no-repeat -10px -100px; /* 8-bit indexed alpha png. IE6 gets solid image only */
+}
+a > .sf-sub-indicator {  /* give all except IE6 the correct values */
+	top:			.8em;
+	background-position: 0 -100px; /* use translucent arrow for modern browsers*/
+}
+/* apply hovers to modern browsers */
+a:focus > .sf-sub-indicator,
+a:hover > .sf-sub-indicator,
+a:active > .sf-sub-indicator,
+li:hover > a > .sf-sub-indicator,
+li.sfHover > a > .sf-sub-indicator {
+	background-position: -10px -100px; /* arrow hovers for modern browsers*/
+}
+
+/* point right for anchors in subs */
+.sf-menu ul .sf-sub-indicator { background-position:  -10px 0; }
+.sf-menu ul a > .sf-sub-indicator { background-position:  0 0; }
+/* apply hovers to modern browsers */
+.sf-menu ul a:focus > .sf-sub-indicator,
+.sf-menu ul a:hover > .sf-sub-indicator,
+.sf-menu ul a:active > .sf-sub-indicator,
+.sf-menu ul li:hover > a > .sf-sub-indicator,
+.sf-menu ul li.sfHover > a > .sf-sub-indicator {
+	background-position: -10px 0; /* arrow hovers for modern browsers*/
+}
+
+/*** shadows for all but IE6 ***/
+.sf-shadow ul {
+	background:	url('../images/shadow.png') no-repeat bottom right;
+	padding: 0 8px 9px 0;
+	-moz-border-radius-bottomleft: 17px;
+	-moz-border-radius-topright: 17px;
+	-webkit-border-top-right-radius: 17px;
+	-webkit-border-bottom-left-radius: 17px;
+}
+.sf-shadow ul.sf-shadow-off {
+	background: transparent;
+}

ADDED   applications/welcome/static/favicon.ico
Index: applications/welcome/static/favicon.ico
==================================================================
--- /dev/null
+++ applications/welcome/static/favicon.ico
cannot compute difference between binary files

ADDED   applications/welcome/static/images/arrows-ffffff.png
Index: applications/welcome/static/images/arrows-ffffff.png
==================================================================
--- /dev/null
+++ applications/welcome/static/images/arrows-ffffff.png
cannot compute difference between binary files

ADDED   applications/welcome/static/images/css3buttons_backgrounds.png
Index: applications/welcome/static/images/css3buttons_backgrounds.png
==================================================================
--- /dev/null
+++ applications/welcome/static/images/css3buttons_backgrounds.png
cannot compute difference between binary files

ADDED   applications/welcome/static/images/css3buttons_icons.png
Index: applications/welcome/static/images/css3buttons_icons.png
==================================================================
--- /dev/null
+++ applications/welcome/static/images/css3buttons_icons.png
cannot compute difference between binary files

ADDED   applications/welcome/static/images/error.png
Index: applications/welcome/static/images/error.png
==================================================================
--- /dev/null
+++ applications/welcome/static/images/error.png
cannot compute difference between binary files

ADDED   applications/welcome/static/images/ok.png
Index: applications/welcome/static/images/ok.png
==================================================================
--- /dev/null
+++ applications/welcome/static/images/ok.png
cannot compute difference between binary files

ADDED   applications/welcome/static/images/poweredby.png
Index: applications/welcome/static/images/poweredby.png
==================================================================
--- /dev/null
+++ applications/welcome/static/images/poweredby.png
cannot compute difference between binary files

ADDED   applications/welcome/static/images/shadow.png
Index: applications/welcome/static/images/shadow.png
==================================================================
--- /dev/null
+++ applications/welcome/static/images/shadow.png
cannot compute difference between binary files

ADDED   applications/welcome/static/images/warn.png
Index: applications/welcome/static/images/warn.png
==================================================================
--- /dev/null
+++ applications/welcome/static/images/warn.png
cannot compute difference between binary files

ADDED   applications/welcome/static/images/warning.png
Index: applications/welcome/static/images/warning.png
==================================================================
--- /dev/null
+++ applications/welcome/static/images/warning.png
cannot compute difference between binary files

ADDED   applications/welcome/static/js/calendar.js
Index: applications/welcome/static/js/calendar.js
==================================================================
--- /dev/null
+++ applications/welcome/static/js/calendar.js
cannot compute difference between binary files

ADDED   applications/welcome/static/js/dd_belatedpng.js
Index: applications/welcome/static/js/dd_belatedpng.js
==================================================================
--- /dev/null
+++ applications/welcome/static/js/dd_belatedpng.js
@@ -0,0 +1,13 @@
+/**
+* DD_belatedPNG: Adds IE6 support: PNG images for CSS background-image and HTML .
+* Author: Drew Diller
+* Email: drew.diller@gmail.com
+* URL: http://www.dillerdesign.com/experiment/DD_belatedPNG/
+* Version: 0.0.8a
+* Licensed under the MIT License: http://dillerdesign.com/experiment/DD_belatedPNG/#license
+*
+* Example usage:
+* DD_belatedPNG.fix('.png_bg'); // argument is a CSS selector
+* DD_belatedPNG.fixPng( someNode ); // argument is an HTMLDomElement
+**/
+var DD_belatedPNG={ns:"DD_belatedPNG",imgSize:{},delay:10,nodesFixed:0,createVmlNameSpace:function(){if(document.namespaces&&!document.namespaces[this.ns]){document.namespaces.add(this.ns,"urn:schemas-microsoft-com:vml")}},createVmlStyleSheet:function(){var b,a;b=document.createElement("style");b.setAttribute("media","screen");document.documentElement.firstChild.insertBefore(b,document.documentElement.firstChild.firstChild);if(b.styleSheet){b=b.styleSheet;b.addRule(this.ns+"\\:*","{behavior:url(#default#VML)}");b.addRule(this.ns+"\\:shape","position:absolute;");b.addRule("img."+this.ns+"_sizeFinder","behavior:none; border:none; position:absolute; z-index:-1; top:-10000px; visibility:hidden;");this.screenStyleSheet=b;a=document.createElement("style");a.setAttribute("media","print");document.documentElement.firstChild.insertBefore(a,document.documentElement.firstChild.firstChild);a=a.styleSheet;a.addRule(this.ns+"\\:*","{display: none !important;}");a.addRule("img."+this.ns+"_sizeFinder","{display: none !important;}")}},readPropertyChange:function(){var b,c,a;b=event.srcElement;if(!b.vmlInitiated){return}if(event.propertyName.search("background")!=-1||event.propertyName.search("border")!=-1){DD_belatedPNG.applyVML(b)}if(event.propertyName=="style.display"){c=(b.currentStyle.display=="none")?"none":"block";for(a in b.vml){if(b.vml.hasOwnProperty(a)){b.vml[a].shape.style.display=c}}}if(event.propertyName.search("filter")!=-1){DD_belatedPNG.vmlOpacity(b)}},vmlOpacity:function(b){if(b.currentStyle.filter.search("lpha")!=-1){var a=b.currentStyle.filter;a=parseInt(a.substring(a.lastIndexOf("=")+1,a.lastIndexOf(")")),10)/100;b.vml.color.shape.style.filter=b.currentStyle.filter;b.vml.image.fill.opacity=a}},handlePseudoHover:function(a){setTimeout(function(){DD_belatedPNG.applyVML(a)},1)},fix:function(a){if(this.screenStyleSheet){var c,b;c=a.split(",");for(b=0;bn.H){i.B=n.H}d.vml.image.shape.style.clip="rect("+i.T+"px "+(i.R+a)+"px "+i.B+"px "+(i.L+a)+"px)"}else{d.vml.image.shape.style.clip="rect("+f.T+"px "+f.R+"px "+f.B+"px "+f.L+"px)"}},figurePercentage:function(d,c,f,a){var b,e;e=true;b=(f=="X");switch(a){case"left":case"top":d[f]=0;break;case"center":d[f]=0.5;break;case"right":case"bottom":d[f]=1;break;default:if(a.search("%")!=-1){d[f]=parseInt(a,10)/100}else{e=false}}d[f]=Math.ceil(e?((c[b?"W":"H"]*d[f])-(c[b?"w":"h"]*d[f])):parseInt(a,10));if(d[f]%2===0){d[f]++}return d[f]},fixPng:function(c){c.style.behavior="none";var g,b,f,a,d;if(c.nodeName=="BODY"||c.nodeName=="TD"||c.nodeName=="TR"){return}c.isImg=false;if(c.nodeName=="IMG"){if(c.src.toLowerCase().search(/\.png$/)!=-1){c.isImg=true;c.style.visibility="hidden"}else{return}}else{if(c.currentStyle.backgroundImage.toLowerCase().search(".png")==-1){return}}g=DD_belatedPNG;c.vml={color:{},image:{}};b={shape:{},fill:{}};for(a in c.vml){if(c.vml.hasOwnProperty(a)){for(d in b){if(b.hasOwnProperty(d)){f=g.ns+":"+d;c.vml[a][d]=document.createElement(f)}}c.vml[a].shape.stroked=false;c.vml[a].shape.appendChild(c.vml[a].fill);c.parentNode.insertBefore(c.vml[a].shape,c)}}c.vml.image.shape.fillcolor="none";c.vml.image.fill.type="tile";c.vml.color.fill.on=false;g.attachHandlers(c);g.giveLayout(c);g.giveLayout(c.offsetParent);c.vmlInitiated=true;g.applyVML(c)}};try{document.execCommand("BackgroundImageCache",false,true)}catch(r){}DD_belatedPNG.createVmlNameSpace();DD_belatedPNG.createVmlStyleSheet();

ADDED   applications/welcome/static/js/jquery.js
Index: applications/welcome/static/js/jquery.js
==================================================================
--- /dev/null
+++ applications/welcome/static/js/jquery.js
cannot compute difference between binary files

ADDED   applications/welcome/static/js/modernizr-1.7.min.js
Index: applications/welcome/static/js/modernizr-1.7.min.js
==================================================================
--- /dev/null
+++ applications/welcome/static/js/modernizr-1.7.min.js
@@ -0,0 +1,2 @@
+// Modernizr v1.7  www.modernizr.com
+window.Modernizr=function(a,b,c){function G(){e.input=function(a){for(var b=0,c=a.length;b7)},r.history=function(){return !!(a.history&&history.pushState)},r.draganddrop=function(){return x("dragstart")&&x("drop")},r.websockets=function(){return"WebSocket"in a},r.rgba=function(){A("background-color:rgba(150,255,150,.5)");return D(k.backgroundColor,"rgba")},r.hsla=function(){A("background-color:hsla(120,40%,100%,.5)");return D(k.backgroundColor,"rgba")||D(k.backgroundColor,"hsla")},r.multiplebgs=function(){A("background:url(//:),url(//:),red url(//:)");return(new RegExp("(url\\s*\\(.*?){3}")).test(k.background)},r.backgroundsize=function(){return F("backgroundSize")},r.borderimage=function(){return F("borderImage")},r.borderradius=function(){return F("borderRadius","",function(a){return D(a,"orderRadius")})},r.boxshadow=function(){return F("boxShadow")},r.textshadow=function(){return b.createElement("div").style.textShadow===""},r.opacity=function(){B("opacity:.55");return/^0.55$/.test(k.opacity)},r.cssanimations=function(){return F("animationName")},r.csscolumns=function(){return F("columnCount")},r.cssgradients=function(){var a="background-image:",b="gradient(linear,left top,right bottom,from(#9f9),to(white));",c="linear-gradient(left top,#9f9, white);";A((a+o.join(b+a)+o.join(c+a)).slice(0,-a.length));return D(k.backgroundImage,"gradient")},r.cssreflections=function(){return F("boxReflect")},r.csstransforms=function(){return!!E(["transformProperty","WebkitTransform","MozTransform","OTransform","msTransform"])},r.csstransforms3d=function(){var a=!!E(["perspectiveProperty","WebkitPerspective","MozPerspective","OPerspective","msPerspective"]);a&&"webkitPerspective"in g.style&&(a=w("@media ("+o.join("transform-3d),(")+"modernizr)"));return a},r.csstransitions=function(){return F("transitionProperty")},r.fontface=function(){var a,c,d=h||g,e=b.createElement("style"),f=b.implementation||{hasFeature:function(){return!1}};e.type="text/css",d.insertBefore(e,d.firstChild),a=e.sheet||e.styleSheet;var i=f.hasFeature("CSS2","")?function(b){if(!a||!b)return!1;var c=!1;try{a.insertRule(b,0),c=/src/i.test(a.cssRules[0].cssText),a.deleteRule(a.cssRules.length-1)}catch(d){}return c}:function(b){if(!a||!b)return!1;a.cssText=b;return a.cssText.length!==0&&/src/i.test(a.cssText)&&a.cssText.replace(/\r+|\n+/g,"").indexOf(b.split(" ")[0])===0};c=i('@font-face { font-family: "font"; src: url(data:,); }'),d.removeChild(e);return c},r.video=function(){var a=b.createElement("video"),c=!!a.canPlayType;if(c){c=new Boolean(c),c.ogg=a.canPlayType('video/ogg; codecs="theora"');var d='video/mp4; codecs="avc1.42E01E';c.h264=a.canPlayType(d+'"')||a.canPlayType(d+', mp4a.40.2"'),c.webm=a.canPlayType('video/webm; codecs="vp8, vorbis"')}return c},r.audio=function(){var a=b.createElement("audio"),c=!!a.canPlayType;c&&(c=new Boolean(c),c.ogg=a.canPlayType('audio/ogg; codecs="vorbis"'),c.mp3=a.canPlayType("audio/mpeg;"),c.wav=a.canPlayType('audio/wav; codecs="1"'),c.m4a=a.canPlayType("audio/x-m4a;")||a.canPlayType("audio/aac;"));return c},r.localstorage=function(){try{return!!localStorage.getItem}catch(a){return!1}},r.sessionstorage=function(){try{return!!sessionStorage.getItem}catch(a){return!1}},r.webWorkers=function(){return!!a.Worker},r.applicationcache=function(){return!!a.applicationCache},r.svg=function(){return!!b.createElementNS&&!!b.createElementNS(q.svg,"svg").createSVGRect},r.inlinesvg=function(){var a=b.createElement("div");a.innerHTML="";return(a.firstChild&&a.firstChild.namespaceURI)==q.svg},r.smil=function(){return!!b.createElementNS&&/SVG/.test(n.call(b.createElementNS(q.svg,"animate")))},r.svgclippaths=function(){return!!b.createElementNS&&/SVG/.test(n.call(b.createElementNS(q.svg,"clipPath")))};for(var H in r)z(r,H)&&(v=H.toLowerCase(),e[v]=r[H](),u.push((e[v]?"":"no-")+v));e.input||G(),e.crosswindowmessaging=e.postmessage,e.historymanagement=e.history,e.addTest=function(a,b){a=a.toLowerCase();if(!e[a]){b=!!b(),g.className+=" "+(b?"":"no-")+a,e[a]=b;return e}},A(""),j=l=null,f&&a.attachEvent&&function(){var a=b.createElement("div");a.innerHTML="";return a.childNodes.length!==1}()&&function(a,b){function p(a,b){var c=-1,d=a.length,e,f=[];while(++c »'].join('')),
+			over = function(){
+				var $$ = $(this), menu = getMenu($$);
+				clearTimeout(menu.sfTimer);
+				$$.showSuperfishUl().siblings().hideSuperfishUl();
+			},
+			out = function(){
+				var $$ = $(this), menu = getMenu($$), o = sf.op;
+				clearTimeout(menu.sfTimer);
+				menu.sfTimer=setTimeout(function(){
+					o.retainPath=($.inArray($$[0],o.$path)>-1);
+					$$.hideSuperfishUl();
+					if (o.$path.length && $$.parents(['li.',o.hoverClass].join('')).length<1){over.call(o.$path);}
+				},o.delay);	
+			},
+			getMenu = function($menu){
+				var menu = $menu.parents(['ul.',c.menuClass,':first'].join(''))[0];
+				sf.op = sf.o[menu.serial];
+				return menu;
+			},
+			addArrow = function($a){ $a.addClass(c.anchorClass).append($arrow.clone()); };
+			
+		return this.each(function() {
+			var s = this.serial = sf.o.length;
+			var o = $.extend({},sf.defaults,op);
+			o.$path = $('li.'+o.pathClass,this).slice(0,o.pathLevels).each(function(){
+				$(this).addClass([o.hoverClass,c.bcClass].join(' '))
+					.filter('li:has(ul)').removeClass(o.pathClass);
+			});
+			sf.o[s] = sf.op = o;
+			
+			$('li:has(ul)',this)[($.fn.hoverIntent && !o.disableHI) ? 'hoverIntent' : 'hover'](over,out).each(function() {
+				if (o.autoArrows) addArrow( $('>a:first-child',this) );
+			})
+			.not('.'+c.bcClass)
+				.hideSuperfishUl();
+			
+			var $a = $('a',this);
+			$a.each(function(i){
+				var $li = $a.eq(i).parents('li');
+				$a.eq(i).focus(function(){over.call($li);}).blur(function(){out.call($li);});
+			});
+			o.onInit.call(this);
+			
+		}).each(function() {
+			var menuClasses = [c.menuClass];
+			if (sf.op.dropShadows  && !($.browser.msie && $.browser.version < 7)) menuClasses.push(c.shadowClass);
+			$(this).addClass(menuClasses.join(' '));
+		});
+	};
+
+	var sf = $.fn.superfish;
+	sf.o = [];
+	sf.op = {};
+	sf.IE7fix = function(){
+		var o = sf.op;
+		if ($.browser.msie && $.browser.version > 6 && o.dropShadows && o.animation.opacity!=undefined)
+			this.toggleClass(sf.c.shadowClass+'-off');
+		};
+	sf.c = {
+		bcClass     : 'sf-breadcrumb',
+		menuClass   : 'sf-js-enabled',
+		anchorClass : 'sf-with-ul',
+		arrowClass  : 'sf-sub-indicator',
+		shadowClass : 'sf-shadow'
+	};
+	sf.defaults = {
+		hoverClass	: 'sfHover',
+		pathClass	: 'overideThisToUse',
+		pathLevels	: 1,
+		delay		: 800,
+		animation	: {opacity:'show'},
+		speed		: 'normal',
+		autoArrows	: true,
+		dropShadows : true,
+		disableHI	: false,		// true disables hoverIntent detection
+		onInit		: function(){}, // callback functions
+		onBeforeShow: function(){},
+		onShow		: function(){},
+		onHide		: function(){}
+	};
+	$.fn.extend({
+		hideSuperfishUl : function(){
+			var o = sf.op,
+				not = (o.retainPath===true) ? o.$path : '';
+			o.retainPath = false;
+			var $ul = $(['li.',o.hoverClass].join(''),this).add(this).not(not).removeClass(o.hoverClass)
+					.find('>ul').hide().css('visibility','hidden');
+			o.onHide.call($ul);
+			return this;
+		},
+		showSuperfishUl : function(){
+			var o = sf.op,
+				sh = sf.c.shadowClass+'-off',
+				$ul = this.addClass(o.hoverClass)
+					.find('>ul:hidden').css('visibility','visible');
+			sf.IE7fix.call($ul);
+			o.onBeforeShow.call($ul);
+			$ul.animate(o.animation,o.speed,function(){ sf.IE7fix.call($ul); o.onShow.call($ul); });
+			return this;
+		}
+	});
+
+})(jQuery);

ADDED   applications/welcome/static/js/web2py_ajax.js
Index: applications/welcome/static/js/web2py_ajax.js
==================================================================
--- /dev/null
+++ applications/welcome/static/js/web2py_ajax.js
@@ -0,0 +1,97 @@
+function popup(url) {
+  newwindow=window.open(url,'name','height=400,width=600');
+  if (window.focus) newwindow.focus();
+  return false;
+}
+function collapse(id) { jQuery('#'+id).slideToggle(); }
+function fade(id,value) { if(value>0) jQuery('#'+id).hide().fadeIn('slow'); else jQuery('#'+id).show().fadeOut('slow'); }
+function ajax(u,s,t) {
+    query = '';
+    if (typeof s == "string") {
+        d = jQuery(s).serialize();
+        if(d){ query = d; }
+    } else {
+        pcs = [];
+        for(i=0; i0){query = pcs.join("&");}
+    }
+    jQuery.ajax({type: "POST", url: u, data: query, success: function(msg) { if(t) { if(t==':eval') eval(msg); else jQuery("#" + t).html(msg); } } }); 
+}
+
+String.prototype.reverse = function () { return this.split('').reverse().join('');};
+function web2py_ajax_init() {
+  jQuery('.hidden').hide();
+  jQuery('.error').hide().slideDown('slow');
+  jQuery('.flash').click(function() { jQuery(this).fadeOut('slow'); return false; });
+  // jQuery('input[type=submit]').click(function(){var t=jQuery(this);t.hide();t.after('')});
+  jQuery('input.integer').live('keyup', function(){this.value=this.value.reverse().replace(/[^0-9\-]|\-(?=.)/g,'').reverse();});
+  jQuery('input.double,input.decimal').live('keyup', function(){this.value=this.value.reverse().replace(/[^0-9\-\.,]|[\-](?=.)|[\.,](?=[0-9]*[\.,])/g,'').reverse();});
+  var confirm_message = (typeof w2p_ajax_confirm_message != 'undefined') ? w2p_ajax_confirm_message : "Are you sure you want to delete this object?";
+  jQuery("input[type='checkbox'].delete").live('click', function(){ if(this.checked) if(!confirm(confirm_message)) this.checked=false; });
+  var date_format = (typeof w2p_ajax_date_format != 'undefined') ? w2p_ajax_date_format : "%Y-%m-%d";
+  try {jQuery("input.date").live('focus',function() {Calendar.setup({
+     inputField:this, ifFormat:date_format, showsTime:false
+  }); }); } catch(e) {};
+  var datetime_format = (typeof w2p_ajax_datetime_format != 'undefined') ? w2p_ajax_datetime_format : "%Y-%m-%d %H:%M:%S";
+  try { jQuery("input.datetime").live('focus', function() {Calendar.setup({
+     inputField:this, ifFormat:datetime_format, showsTime: true,timeFormat: "24"
+  }); }); } catch(e) {};
+
+  jQuery("input.time").live('focus', function() { var el = jQuery(this); 
+          if (!el.hasClass('hasTimeEntry')) try { el.timeEntry(); } catch(e) {}; 
+  });
+};
+
+jQuery(function() {   
+   var flash = jQuery('.flash');
+   flash.hide();
+   if(flash.html()) flash.slideDown();
+   web2py_ajax_init();
+});
+function web2py_trap_form(action,target) {
+   jQuery('#'+target+' form').each(function(i){
+      var form=jQuery(this);
+      if(!form.hasClass('no_trap'))
+        form.submit(function(obj){
+         jQuery('.flash').hide().html('');
+         web2py_ajax_page('post',action,form.serialize(),target);
+         return false;
+      });
+   });
+}
+function web2py_ajax_page(method,action,data,target) {
+  jQuery.ajax({'type':method,'url':action,'data':data,
+    'beforeSend':function(xhr) {
+      xhr.setRequestHeader('web2py-component-location',document.location);
+      xhr.setRequestHeader('web2py-component-element',target);},
+    'complete':function(xhr,text){
+      var html=xhr.responseText;
+      var content=xhr.getResponseHeader('web2py-component-content'); 
+      var command=xhr.getResponseHeader('web2py-component-command');
+      var flash=xhr.getResponseHeader('web2py-component-flash');
+      var t = jQuery('#'+target);
+      if(content=='prepend') t.prepend(html); 
+      else if(content=='append') t.append(html);
+      else if(content!='hide') t.html(html);  
+      web2py_trap_form(action,target);
+      web2py_ajax_init();      
+      if(command) eval(command);
+      if(flash) jQuery('.flash').html(flash).slideDown();
+      }
+    });
+}
+function web2py_component(action,target) {
+  jQuery(function(){ web2py_ajax_page('get',action,null,target); });
+}
+function web2py_comet(url,onmessage,onopen,onclose) {
+  if ("WebSocket" in window) {
+    var ws = new WebSocket(url);
+    ws.onopen = onopen?onopen:(function(){});
+    ws.onmessage = onmessage;
+    ws.onclose = onclose?onclose:(function(){});
+    return true; // supported
+  } else return false; // not supported
+}

ADDED   applications/welcome/static/robots.txt
Index: applications/welcome/static/robots.txt
==================================================================
--- /dev/null
+++ applications/welcome/static/robots.txt
@@ -0,0 +1,2 @@
+User-agent: *
+Disallow: /welcome/default/user

ADDED   applications/welcome/views/__init__.py
Index: applications/welcome/views/__init__.py
==================================================================
--- /dev/null
+++ applications/welcome/views/__init__.py

ADDED   applications/welcome/views/appadmin.html
Index: applications/welcome/views/appadmin.html
==================================================================
--- /dev/null
+++ applications/welcome/views/appadmin.html
@@ -0,0 +1,198 @@
+{{extend 'layout.html'}}
+
+
+{{if request.function=='index':}}
+  
    {{=T("Available databases and tables")}}
    
+  {{if not databases:}}{{=T("No databases in this application")}}{{pass}}
+  {{for db in sorted(databases):}}
+    {{for table in databases[db].tables:}}
+      {{qry='%s.%s.id>0'%(db,table)}}
+      {{tbl=databases[db][table]}}
+      {{if hasattr(tbl,'_primarykey'):}}
+        {{if tbl._primarykey:}}
+            {{firstkey=tbl[tbl._primarykey[0]]}}
+            {{if firstkey.type in ['string','text']:}}
+              {{qry='%s.%s.%s!=""'%(db,table,firstkey.name)}}
+            {{else:}}
+              {{qry='%s.%s.%s>0'%(db,table,firstkey.name)}}
+            {{pass}}
+        {{else:}}
+             {{qry=''}}
+             {{pass}}
+      {{pass}}
+      
    {{=A("%s.%s" % (db,table),_href=URL('select',args=[db],vars=dict(query=qry)))}}
+
    
+      [ {{=A(str(T('insert new'))+' '+table,_href=URL('insert',args=[db,table]))}} ]
+    

    
+    {{pass}}
+  {{pass}}
+
+{{elif request.function=='select':}}
+  
    {{=XML(str(T("database %s select"))%A(request.args[0],_href=URL('index'))) }}
+  
    
+   {{if table:}}
+  [ {{=A(str(T('insert new %s'))%table,_href=URL('insert',args=[request.args[0],table]))}} ]

    
+    
    {{=T("Rows in table")}}

    
+   {{else:}}
+    
    {{=T("Rows selected")}}

    
+   {{pass}}
+   {{=form}}
+   
    {{=T('The "query" is a condition like "db.table1.field1==\'value\'". Something like "db.table1.field1==db.table2.field2" results in a SQL JOIN.')}}
    
+      {{=T('Use (...)&(...) for AND, (...)|(...) for OR, and ~(...)  for NOT to build more complex queries.')}}
    
+      {{=T('"update" is an optional expression like "field1=\'newvalue\'". You cannot update or delete the results of a JOIN')}}
    
+    

    
+    
    {{=nrows}} {{=T("selected")}}
    
+    {{if start>0:}}[ {{=A(T('previous 100 rows'),_href=URL('select',args=request.args[0],vars=dict(start=start-100)))}} ]{{pass}}
+    {{if stop
+       {{linkto=URL('update',args=request.args[0])}}
+       {{upload=URL('download',args=request.args[0])}}    
+       {{=SQLTABLE(rows,linkto,upload,orderby=True,_class='sortable')}}
+       
+    {{pass}}
+    

    {{=T("Import/Export")}}

    
+    [ {{=T("export as csv file")}} ]
+  {{if table:}}
+    {{=FORM(str(T('or import from csv file'))+" ",INPUT(_type='file',_name='csvfile'),INPUT(_type='hidden',_value=table,_name='table'),INPUT(_type='submit',_value='import'))}}
+  {{pass}}
+
+
+{{elif request.function=='insert':}}  
+  
    {{=T("database")}} {{=A(request.args[0],_href=URL('index'))}}
+    {{if hasattr(table,'_primarykey'):}}
+      {{fieldname=table._primarykey[0]}}
+      {{dbname=request.args[0]}}
+      {{tablename=request.args[1]}}
+      {{cond = table[fieldname].type in ['string','text'] and '!=""' or '>0'}}
+      {{=T("table")}} {{=A(tablename,_href=URL('select',args=dbname,vars=dict(query='%s.%s.%s%s'%(dbname,tablename,fieldname,cond))))}}
+    {{else:}}  
+      {{=T("table")}} {{=A(request.args[1],_href=URL('select',args=request.args[0],vars=dict(query='%s.%s.id>0'%tuple(request.args[:2]))))}}
+    {{pass}}
+  
    
+  
    {{=T("New Record")}}

    
+  {{=form}}
+
+
+
+{{elif request.function=='update':}}
+  
    {{=T("database")}} {{=A(request.args[0],_href=URL('index'))}}
+    {{if hasattr(table,'_primarykey'):}}
+      {{fieldname=request.vars.keys()[0]}}
+      {{dbname=request.args[0]}}
+      {{tablename=request.args[1]}}
+      {{cond = table[fieldname].type in ['string','text'] and '!=""' or '>0'}}      
+      {{=T("table")}} {{=A(tablename,_href=URL('select',args=dbname,vars=dict(query='%s.%s.%s%s'%(dbname,tablename,fieldname,cond))))}}
+      {{=T("record")}} {{=A('%s=%s'%request.vars.items()[0],_href=URL('update',args=request.args[:2],vars=request.vars))}}
+    {{else:}}
+      {{=T("table")}} {{=A(request.args[1],_href=URL('select',args=request.args[0],vars=dict(query='%s.%s.id>0'%tuple(request.args[:2]))))}}
+      {{=T("record id")}} {{=A(request.args[2],_href=URL('update',args=request.args[:3]))}}
+    {{pass}}
+  
    
+  
    {{=T("Edit current record")}}


    {{=form}}
+
+
+
+{{elif request.function=='state':}}
+  
    {{=T("Internal State")}}
    
+  
    {{=T("Current request")}}
    
+  {{=BEAUTIFY(request)}}
+  
    {{=T("Current response")}}
    
+  {{=BEAUTIFY(response)}}
+  
    {{=T("Current session")}}
    
+  {{=BEAUTIFY(session)}}
+
+
+{{elif request.function == 'ccache':}}
+
    Cache
    
+
    
+
    
+    
    
+        Statistics
+    
    
+    
    
+        
    Overview
    
+        
    
+            Hit Ratio: 
+            {{=total['ratio']}}% 
+            ({{=total['hits']}} hits 
+            and {{=total['misses']}} misses)
+        
    
+        
    
+            Size of cache: 
+            {{=total['objects']}} items, 
+            {{=total['bytes']}} bytes 
+            {{if total['bytes'] > 524287:}}
+                ({{="%.0d" % (total['bytes'] / 1048576)}} MB)
+            {{pass}}
+        
    
+        
    
+            Cache contains items up to 
+            {{="%02d" % total['oldest'][0]}} hours 
+            {{="%02d" % total['oldest'][1]}} minutes 
+            {{="%02d" % total['oldest'][2]}} seconds old.
+        
    
+        
    RAM
    
+        
    
+            Hit Ratio: 
+            {{=ram['ratio']}}% 
+            ({{=ram['hits']}} hits 
+            and {{=ram['misses']}} misses)
+        
    
+        
    
+            Size of cache: 
+            {{=ram['objects']}} items, 
+            {{=ram['bytes']}} bytes 
+            {{if ram['bytes'] > 524287:}}
+                ({{=ram['bytes'] / 1048576}} MB)
+            {{pass}}
+        
    
+        
    
+            RAM contains items up to 
+            {{="%02d" % ram['oldest'][0]}} hours 
+            {{="%02d" % ram['oldest'][1]}} minutes 
+            {{="%02d" % ram['oldest'][2]}} seconds old.
+        
    
+        
    DISK
    
+        
    
+            Hit Ratio: 
+            {{=disk['ratio']}}% 
+            ({{=disk['hits']}} hits 
+            and {{=disk['misses']}} misses)
+        
    
+        
    
+            Size of cache: 
+            {{=disk['objects']}} items, 
+            {{=disk['bytes']}} bytes 
+            {{if disk['bytes'] > 524287:}}
+                ({{=disk['bytes'] / 1048576}} MB)
+            {{pass}}
+        
    
+        
    
+            DISK contains items up to 
+            {{="%02d" % disk['oldest'][0]}} hours 
+            {{="%02d" % disk['oldest'][1]}} minutes 
+            {{="%02d" % disk['oldest'][2]}} seconds old.
+        
    
+    
    
+    
+    
    
+    Manage Cache
+    
    
+    
    
+    
    
+        {{=form}}
+    
    
+    
    
+
    
+
    
+
    
+{{pass}}

ADDED   applications/welcome/views/default/index.html
Index: applications/welcome/views/default/index.html
==================================================================
--- /dev/null
+++ applications/welcome/views/default/index.html
@@ -0,0 +1,33 @@
+{{left_sidebar_enabled=right_sidebar_enabled=False}}
+{{extend 'layout.html'}}
+
+{{if 'message' in globals():}}
+
+
    {{=message}}
    
+
+
    
+
    {{=T("Readme")}}
    
+
      
+  
    • {{=T('You are successfully running web2py')}}
      • 
+  
    • {{=T('This is a copy of the scaffolding application')}}
      • 
+  
    • {{=T('You can modify this application and adapt it to your needs')}}
      • 
+  
    • {{=A(B(T("Administrative interface")), _href=URL('admin','default','index'))}}
      • 
+  
    • {{=A(T("Online examples"), _href=URL('examples','default','index'))}}
      • 
+  
    • web2py.com
      • 
+  
    • {{=T('Documentation')}}
      • 
+
    
+
+
      
+  
    1. {{=T('You visited the url')}} {{=A(request.env.path_info,_href=request.env.path_info)}}
      2. 
+  
    2. {{=T('Which called the function')}} {{=A(request.function+'()',_href='#')}} {{=T('located in the file')}}
+    {{=A('web2py/applications/%(application)s/controllers/%(controller)s.py'%request,_href=URL('admin','default','peek',args=(request.application,'controllers',request.controller+'.py')))}}
      3. 
+  
    3. {{=T('The output of the file is a dictionary that was rendered by the view')}}
+    {{=A('web2py/applications/%(application)s/views/%(controller)s/index.html'%request,_href=URL('admin','default','peek',args=(request.application,'views',request.controller,'index.html')))}}
      4. 
+
    
+
+{{else:}}
+{{=BEAUTIFY(response._vars)}}
+{{pass}}
+
+{{block left_sidebar}}New Left Sidebar Content{{end}}
+{{block right_sidebar}}New Right Sidebar Content{{end}}

ADDED   applications/welcome/views/default/user.html
Index: applications/welcome/views/default/user.html
==================================================================
--- /dev/null
+++ applications/welcome/views/default/user.html
@@ -0,0 +1,19 @@
+{{extend 'layout.html'}}
+
    {{=T( request.args(0).replace('_',' ').capitalize() )}}
    
+
    
+{{=form}}
+{{if request.args(0)=='login':}}
+{{if not 'register' in auth.settings.actions_disabled:}}
+
    register
+{{pass}}
+{{if not 'request_reset_password' in auth.settings.actions_disabled:}}
+
    lost password
+{{pass}}
+{{pass}}
+
    
+
+ 

ADDED   applications/welcome/views/generic.html
Index: applications/welcome/views/generic.html
==================================================================
--- /dev/null
+++ applications/welcome/views/generic.html
@@ -0,0 +1,16 @@
+{{extend 'layout.html'}}
+{{"""
+
+You should not modify this file. 
+It is used as default when a view is not provided for your controllers
+
+"""}}
+
    {{=' '.join(x.capitalize() for x in request.function.split('_'))}}
    
+{{if len(response._vars)==1:}}
+{{=response._vars.values()[0]}}
+{{elif len(response._vars)>1:}}
+{{=BEAUTIFY(response._vars)}}
+{{pass}}
+{{if request.is_local:}}
+{{=response.toolbar()}}
+{{pass}}

ADDED   applications/welcome/views/generic.json
Index: applications/welcome/views/generic.json
==================================================================
--- /dev/null
+++ applications/welcome/views/generic.json
@@ -0,0 +1,1 @@
+{{from gluon.serializers import json}}{{=XML(json(response._vars))}}

ADDED   applications/welcome/views/generic.load
Index: applications/welcome/views/generic.load
==================================================================
--- /dev/null
+++ applications/welcome/views/generic.load
@@ -0,0 +1,30 @@
+{{'''
+# License: Public Domain
+# Author: Iceberg at 21cn dot com
+
+With this generic.load file, you can use same function to serve two purposes.
+
+= regular action
+- ajax callback (when called with .load)
+
+Example modified from http://www.web2py.com/AlterEgo/default/show/252:
+
+def index():
+    return dict(
+		part1='hello world',
+        	part2=LOAD(url=URL(r=request,f='auxiliary.load'),ajax=True))
+
+def auxiliary():
+    form=SQLFORM.factory(Field('name'))
+    if form.accepts(request.vars):
+        response.flash = 'ok' 
+        return dict(message="Hello %s" % form.vars.name)
+    return dict(form=form)
+
+Notice:
+
+- no need to set response.headers['web2py-response-flash']
+- no need to return a string
+even if the function is called via ajax.
+
+'''}}{{if len(response._vars)==1:}}{{=response._vars.values()[0]}}{{else:}}{{=BEAUTIFY(response._vars)}}{{pass}}

ADDED   applications/welcome/views/generic.pdf
Index: applications/welcome/views/generic.pdf
==================================================================
--- /dev/null
+++ applications/welcome/views/generic.pdf
@@ -0,0 +1,11 @@
+{{
+import os
+from gluon.contrib.generics import pdf_from_html
+filename = '%s/%s.html' % (request.controller,request.function)
+if os.path.exists(os.path.join(request.folder,'views',filename)):
+   html=response.render(filename)
+else:
+   html=BODY(BEAUTIFY(response._vars)).xml()
+pass
+=pdf_from_html(html)
+}}

ADDED   applications/welcome/views/generic.rss
Index: applications/welcome/views/generic.rss
==================================================================
--- /dev/null
+++ applications/welcome/views/generic.rss
@@ -0,0 +1,10 @@
+{{
+###
+# response._vars contains the dictionary returned by the controller action
+# for this to work the action must return something like
+#
+#   dict(title=...,link=...,description=...,created_on='...',items=...)
+#
+# items is a list of dictionaries each with title, link, description, pub_date.
+###
+from gluon.serializers import rss}}{{=XML(rss(response._vars))}}

ADDED   applications/welcome/views/generic.xml
Index: applications/welcome/views/generic.xml
==================================================================
--- /dev/null
+++ applications/welcome/views/generic.xml
@@ -0,0 +1,1 @@
+{{from gluon.serializers import xml}}{{=XML(xml(response._vars))}}

ADDED   applications/welcome/views/layout.html
Index: applications/welcome/views/layout.html
==================================================================
--- /dev/null
+++ applications/welcome/views/layout.html
@@ -0,0 +1,159 @@
+
+
+  
+    
+    	  	
+    
+        
+    
+    
+    
+    {{=response.title or request.application}}
+    
+    
+    	
+    
+    
+    
+    
+    
+    
+    
+    
+    
+    
+
+    
+    
+    
+    
+    
+    
+    {{#------  require CSS and JS files for this page (read info in base.css) ------}}
+    {{response.files.append(URL('static','css/base.css'))}}
+    {{response.files.append(URL('static','css/superfish.css'))}}
+    {{response.files.append(URL('static','js/superfish.js'))}}
+    {{#------ include web2py specific js code (jquery, calendar, form stuff) ------}}
+    {{include 'web2py_ajax.html'}}
+
+    {{
+    #using sidebars need to know what sidebar you want to use
+    #prior of using it, because of static width size of content, you can use
+    #left_sidebar, right_sidebar, both or none (False left and right)    
+    left_sidebar_enabled = globals().get('left_sidebar_enabled',False)
+    right_sidebar_enabled = globals().get('right_sidebar_enabled',False)
+    if left_sidebar_enabled and right_sidebar_enabled: width_content='63%'
+    elif left_sidebar_enabled != right_sidebar_enabled: width_content='740px'
+    else: width_content='100%'
+    if left_sidebar_enabled: left_sidebar_style = 'style="display: block;"'
+    else: left_sidebar_style = 'style="display: none;"'
+    if right_sidebar_enabled: right_sidebar_style = 'style="display: block;"'
+    else: right_sidebar_style = 'style="display: none;"'
+    style_content = 'style="width: %s"' % width_content
+    }}
+  
+  
+  	
+  
+  
+  
+  
+    
+    
+    
    {{=response.flash or ''}}
     
+    
+    
    	      		      	
+      
+      
    		
+	
+	
+	
+	
    
+	  {{block statusbar}} 
+	  {{#------ superfish menu ------}}
+	  {{=MENU(response.menu,_class='sf-menu')}}
+	  
+	  
    	
+	  {{end}}				
+	
    
+	
+	
     	  
+
+	  {{if left_sidebar_enabled:}}
+          
+	  {{pass}}
+
+	  
+	  
    
+	    {{include}}	
+	  
    
+	  
+
+	  {{if right_sidebar_enabled:}}
+          
+          {{pass}}
+
+
+	  
    
+	  
+	
    							
+	
+				
+      
    
+    
    		
+    
+    
+    
+    
+        
+  
+

ADDED   applications/welcome/views/web2py_ajax.html
Index: applications/welcome/views/web2py_ajax.html
==================================================================
--- /dev/null
+++ applications/welcome/views/web2py_ajax.html
@@ -0,0 +1,25 @@
+{{
+response.files.insert(0,URL('static','js/jquery.js'))
+response.files.insert(1,URL('static','css/calendar.css'))
+response.files.insert(2,URL('static','js/calendar.js'))
+for _item in response.meta or []:}}
+     {{
+pass
+for _k,_file in enumerate(response.files or []):
+  if _file in response.files[:_k]:
+     continue
+  _file0=_file.lower().split('?')[0]
+  if _file0.endswith('.css'):}}
+     {{
+  elif _file0.endswith('.js'):}}
+     {{
+  pass
+pass
+}}
+    
+    

ADDED   cgihandler.py
Index: cgihandler.py
==================================================================
--- /dev/null
+++ cgihandler.py
@@ -0,0 +1,20 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro 
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+"""
+
+import os
+import sys
+import wsgiref.handlers
+
+path = os.path.dirname(os.path.abspath(__file__))
+os.chdir(path)
+sys.path = [path]+[p for p in sys.path if not p==path]
+
+import gluon.main
+
+wsgiref.handlers.CGIHandler().run(gluon.main.wsgibase)

ADDED   epydoc.conf
Index: epydoc.conf
==================================================================
--- /dev/null
+++ epydoc.conf
@@ -0,0 +1,150 @@
+[epydoc] # Epydoc section marker (required by ConfigParser)
+
+# The list of objects to document.  Objects can be named using
+# dotted names, module filenames, or package directory names.
+# Aliases for this option include "objects" and "values".
+modules: gluon/*.py
+
+# The type of output that should be generated.  Should be one
+# of: html, text, latex, dvi, ps, pdf.
+#output: latex
+output: html
+
+# The path to the output directory.  May be relative or absolute.
+target: applications/examples/static/epydoc
+#target: docs
+
+# An integer indicating how verbose epydoc should be.  The default
+# value is 0; negative values will suppress warnings and errors;
+# positive values will give more verbose output.
+verbosity: 0
+
+# A boolean value indicating that Epydoc should show a traceback
+# in case of unexpected error. By default don't show tracebacks
+debug: 0
+
+# If True, don't try to use colors or cursor control when doing
+# textual output. The default False assumes a rich text prompt
+simple-term: 0
+
+### Generation options
+
+# The default markup language for docstrings, for modules that do
+# not define __docformat__.  Defaults to epytext.
+docformat: epytext
+
+# Whether or not parsing should be used to examine objects.
+parse: yes
+
+# Whether or not introspection should be used to examine objects.
+introspect: yes
+
+# Don't examine in any way the modules whose dotted name match this
+# regular expression pattern.
+#exclude:
+
+# Don't perform introspection on the modules whose dotted name match this
+# regular expression pattern.
+#exclude-introspect:
+
+# Don't perform parsing on the modules whose dotted name match this
+# regular expression pattern.
+#exclude-parse:
+
+# The format for showing inheritance objects.
+# It should be one of: 'grouped', 'listed', 'included'.
+inheritance: listed
+
+# Whether or not to include private variables.  (Even if included,
+# private variables will be hidden by default.)
+private: yes
+
+# Whether or not to list each module's imports.
+#imports: no
+
+# Whether or not to include syntax highlighted source code in
+# the output (HTML only).
+sourcecode: yes
+
+# Whether or not to include a page with Epydoc log, containing
+# effective option at the time of generation and the reported logs.
+include-log: no
+
+### Output options
+
+# The documented project's name.
+name: web2py Web Framework
+
+# The CSS stylesheet for HTML output.  Can be the name of a built-in
+# stylesheet, or the name of a file.
+css: epydoc.css
+
+# The documented project's URL.
+url: http://www.web2py.com
+
+# HTML code for the project link in the navigation bar.  If left
+# unspecified, the project link will be generated based on the
+# project's name and URL.
+# link: web2py
+
+# The "top" page for the documentation.  Can be a URL, the name
+# of a module or class, or one of the special names "trees.html",
+# "indices.html", or "help.html"
+#top: os.path
+
+# An alternative help file.  The named file should contain the
+# body of an HTML file; navigation bars will be added to it.
+#help: my_helpfile.html
+
+# Whether or not to include a frames-based table of contents.
+frames: yes
+
+# Whether each class should be listed in its own section when
+# generating LaTeX or PDF output.
+separate-classes: no
+
+
+### API linking options
+
+# Define a new API document.  A new interpreted text role
+# will be created
+#external-api: epydoc
+
+# Use the records in this file to resolve objects in the API named NAME.
+#external-api-file: epydoc:api-objects.txt
+
+# Use this URL prefix to configure the string returned for external API.
+#external-api-root: epydoc:http://epydoc.sourceforge.net/api
+
+
+### Graph options
+
+# The list of graph types that should be automatically included
+# in the output.  Graphs are generated using the Graphviz "dot"
+# executable.  Graph types include: "classtree", "callgraph",
+# "umlclasstree".  Use "all" to include all graph types
+# graph: umlclasstree
+# graph: 
+
+# The path to the Graphviz "dot" executable, used to generate
+# graphs.
+#dotpath: C:/home/graphviz/bin/dot.exe
+#dotpath: /Applications/Graphviz.app/Contents/MacOS/dot
+
+# The name of one or more pstat files (generated by the profile
+# or hotshot module).  These are used to generate call graphs.
+#pstat: profile.out
+
+# Specify the font used to generate Graphviz graphs.
+# (e.g., helvetica or times).
+# graph-font: Bitstream Vera Sans
+graph-font: Helvetica
+
+# Specify the font size used to generate Graphviz graphs.
+graph-font-size: 10
+
+### Return value options
+
+# The condition upon which Epydoc should exit with a non-zero
+# exit status. Possible values are error, warning, docstring_warning
+#fail-on: error

ADDED   epydoc.css
Index: epydoc.css
==================================================================
--- /dev/null
+++ epydoc.css
@@ -0,0 +1,410 @@
+
+
+/* Epydoc CSS Stylesheet
+ *
+ * This stylesheet can be used to customize the appearance of epydoc's
+ * HTML output.
+ *
+ */
+
+/* Default Colors & Styles
+ *   - Set the default foreground & background color with 'body'; and 
+ *     link colors with 'a:link' and 'a:visited'.
+ *   - Use bold for decision list terms.
+ *   - The heading styles defined here are used for headings *within*
+ *     docstring descriptions.  All headings used by epydoc itself use
+ *     either class='epydoc' or class='toc' (CSS styles for both
+ *     defined below).
+body                        { background: #ffffff; color: #000000; }
+a:link                      { color: #0000ff; }
+a:visited                   { color: #204080; }
+dt                          { font-weight: bold; }
+h1                          { font-size: +140%; font-style: italic;
+                              font-weight: bold; }
+h2                          { font-size: +125%; font-style: italic;
+                              font-weight: bold; }
+h3                          { font-size: +110%; font-style: italic;
+                              font-weight: normal; }
+code                        { font-size: 100%; }
+ */
+ 
+body                     {  background-color: #fff; color: #585858; font-size: 10pt; font-family: georgia, serif; }
+a                          {color: #FF5C1F; }
+a:hover               { text-decoration: underline; }
+a:visited               { color: #FF5C1F;}
+dt                          { font-weight: bold; }
+h1                          { font-size: +140%; font-style: italic;
+                              font-weight: bold; }
+h2                          { color: #185360; font-size: +125%; font-style: italic;
+                              font-weight: bold; }
+h3                          { color: #185360; font-size: +110%; font-style: italic;
+                              font-weight: normal; }
+code                        { font-size: 100%; }
+
+/* Page Header & Footer
+ *   - The standard page header consists of a navigation bar (with
+ *     pointers to standard pages such as 'home' and 'trees'); a
+ *     breadcrumbs list, which can be used to navigate to containing
+ *     classes or modules; options links, to show/hide private
+ *     variables and to show/hide frames; and a page title (using
+ *     
    ).  The page title may be followed by a link to the
+ *     corresponding source code (using 'span.codelink').
+ *   - The footer consists of a navigation bar, a timestamp, and a
+ *     pointer to epydoc's homepage.
+
+h1.epydoc                   { margin: 0; font-size: +140%; font-weight: bold; }
+h2.epydoc                   { font-size: +130%; font-weight: bold; }
+h3.epydoc                   { font-size: +115%; font-weight: bold; }
+td h3.epydoc                { font-size: +115%; font-weight: bold;
+                              margin-bottom: 0; }
+table.navbar                { background: #a0c0ff; color: #000000;
+                              border: 2px groove #c0d0d0; }
+table.navbar table          { color: #000000; }
+th.navbar-select            { background: #70b0ff;
+                              color: #000000; } 
+table.navbar a              { text-decoration: none; }  
+table.navbar a:link         { color: #0000ff; }
+table.navbar a:visited      { color: #204080; }
+span.breadcrumbs            { font-size: 85%; font-weight: bold; }
+span.options                { font-size: 70%; }
+span.codelink               { font-size: 85%; }
+td.footer                   { font-size: 85%; }
+*/
+
+h1.epydoc                   { margin: 0; font-size: +140%; font-weight: bold; }
+h2.epydoc                   { font-size: +130%; font-weight: bold; }
+h3.epydoc                   { font-size: +115%; font-weight: bold; }
+td h3.epydoc                { font-size: +115%; font-weight: bold;
+                              margin-bottom: 0; }
+table.navbar                { background:  url('title.png') repeat-x; 
+                                    #background: #a0c0ff; 
+                                    color: #FF5C1F;
+                                    #border: 2px groove #c0d0d0; }
+
+table.navbar table          { color: #FF5C1F; }
+th.navbar-select            { background: #fff;
+                                        color: #195866; } 
+
+table.navbar a              { text-decoration: none; 
+                                        color: #FF5C1F;}  
+table.navbar a:link         { color: #FF5C1F; }
+table.navbar a:visited      { color: #FF5C1F; }
+
+span.breadcrumbs            { font-size: 85%; font-weight: bold; }
+span.options                { font-size: 70%; }
+span.codelink               { font-size: 85%; }
+td.footer                   { font-size: 85%; }
+
+
+/* Table Headers
+ *   - Each summary table and details section begins with a 'header'
+ *     row.  This row contains a section title (marked by
+ *     'span.table-header') as well as a show/hide private link
+ *     (marked by 'span.options', defined above).
+ *   - Summary tables that contain user-defined groups mark those
+ *     groups using 'group header' rows.
+
+td.table-header             { background: #70b0ff; color: #000000;
+                              border: 1px solid #608090; }
+td.table-header table       { color: #000000; }
+td.table-header table a:link      { color: #0000ff; }
+td.table-header table a:visited   { color: #204080; }
+span.table-header           { font-size: 120%; font-weight: bold; }
+th.group-header             { background: #c0e0f8; color: #000000;
+                              text-align: left; font-style: italic; 
+                              font-size: 115%; 
+                              border: 1px solid #608090; }
+*/
+td.table-header             { background: #258396; color: #000000;
+                              border: 1px solid #608090; }
+
+td.table-header table       { color: #fff; }
+td.table-header table a:link      { color: #FF5C1F; }
+td.table-header table a:visited   { color: #FF5C1F; }
+span.table-header           { font-size: 120%; font-weight: bold; }
+th.group-header             { background: #185360; color: #fff;
+                              text-align: left; font-style: italic; 
+                              font-size: 115%; 
+                              border: 1px solid #608090; }
+
+/* Summary Tables (functions, variables, etc)
+ *   - Each object is described by a single row of the table with
+ *     two cells.  The left cell gives the object's type, and is
+ *     marked with 'code.summary-type'.  The right cell gives the
+ *     object's name and a summary description.
+ *   - CSS styles for the table's header and group headers are
+ *     defined above, under 'Table Headers'
+ */
+table.summary               { border-collapse: collapse;
+                              background: #e8f0f8; color: #000000;
+                              border: 1px solid #608090;
+                              margin-bottom: 0.5em; }
+td.summary                  { border: 1px solid #608090; }
+code.summary-type           { font-size: 85%; }
+table.summary a:link        { color: #FF5C1F; }
+table.summary a:visited     { color: #FF5C1F; }
+
+
+/* Details Tables (functions, variables, etc)
+ *   - Each object is described in its own div.
+ *   - A single-row summary table w/ table-header is used as
+ *     a header for each details section (CSS style for table-header
+ *     is defined above, under 'Table Headers').
+ */
+table.details               { border-collapse: collapse;
+                              background: #e8f0f8; color: #585858;
+                              border: 1px solid #608090;
+                              margin: .2em 0 0 0; }
+table.details table         { color: #fff; }
+table.details a:link        { color: #FF5C1F; }
+table.details a:visited     { color: #FF5C1F; }
+
+/* Fields */
+dl.fields                   { margin-left: 2em; margin-top: 1em;
+                              margin-bottom: 1em; }
+dl.fields dd ul             { margin-left: 0em; padding-left: 0em; }
+div.fields                  { margin-left: 2em; }
+div.fields p                { margin-bottom: 0.5em; }
+
+/* Index tables (identifier index, term index, etc)
+ *   - link-index is used for indices containing lists of links
+ *     (namely, the identifier index & term index).
+ *   - index-where is used in link indices for the text indicating
+ *     the container/source for each link.
+ *   - metadata-index is used for indices containing metadata
+ *     extracted from fields (namely, the bug index & todo index).
+ */
+table.link-index            { border-collapse: collapse;
+                              background: #e8f0f8; color: #000000;
+                              border: 1px solid #608090; }
+td.link-index               { border-width: 0px; }
+table.link-index a:link     { color: #FF5C1F; }
+table.link-index a:visited  { color: #FF5C1F; }
+span.index-where            { font-size: 70%; }
+table.metadata-index        { border-collapse: collapse;
+                              background: #e8f0f8; color: #000000;
+                              border: 1px solid #608090; 
+                              margin: .2em 0 0 0; }
+td.metadata-index           { border-width: 1px; border-style: solid; }
+table.metadata-index a:link { color: #FF5C1F; }
+table.metadata-index a:visited  { color: #FF5C1F; }
+
+/* Function signatures
+ *   - sig* is used for the signature in the details section.
+ *   - .summary-sig* is used for the signature in the summary 
+ *     table, and when listing property accessor functions.
+.sig-name                   { color: #006080; }
+.sig-arg                    { color: #008060; }
+.sig-default                { color: #602000; }
+.summary-sig                { font-family: monospace; }
+.summary-sig-name           { color: #006080; font-weight: bold; }
+table.summary a.summary-sig-name:link
+                            { color: #006080; font-weight: bold; }
+table.summary a.summary-sig-name:visited
+                            { color: #006080; font-weight: bold; }
+.summary-sig-arg            { color: #006040; }
+.summary-sig-default        { color: #501800; }
+ * */
+.sig-name                   { color: #FF5C1F; }
+.sig-arg                    { color: #008060; }
+.sig-default                { color: #602000; }
+.summary-sig                { font-family: monospace; }
+.summary-sig-name           { color: #FF5C1F; font-weight: bold; }
+table.summary a.summary-sig-name:link
+                            { color: #FF5C1F; font-weight: bold; }
+table.summary a.summary-sig-name:visited
+                            { color: #FF5C1F; font-weight: bold; }
+.summary-sig-arg            { color: #006040; }
+.summary-sig-default        { color: #FF5C1F; }
+
+
+/* To render variables, classes etc. like functions */
+table.summary .summary-name { color: #FF5C1F; font-weight: bold;
+                              font-family: monospace; }
+table.summary
+     a.summary-name:link    { color: #FF5C1F; font-weight: bold;
+                              font-family: monospace; }
+table.summary
+    a.summary-name:visited  { color: #FF5C1F; font-weight: bold;
+                              font-family: monospace; }
+
+/* Variable values
+ *   - In the 'variable details' sections, each variable's value is
+ *     listed in a 'pre.variable' box.  The width of this box is
+ *     restricted to 80 chars; if the value's repr is longer than
+ *     this it will be wrapped, using a backslash marked with
+ *     class 'variable-linewrap'.  If the value's repr is longer
+ *     than 3 lines, the rest will be elided; and an ellipsis
+ *     marker ('...' marked with 'variable-ellipsis') will be used.
+ *   - If the value is a string, its quote marks will be marked
+ *     with 'variable-quote'.
+ *   - If the variable is a regexp, it is syntax-highlighted using
+ *     the re* CSS classes.
+ */
+pre.variable                { padding: .5em; margin: 0;
+                              background: #dce4ec; color: #000000;
+                              border: 1px solid #708890; }
+.variable-linewrap          { color: #604000; font-weight: bold; }
+.variable-ellipsis          { color: #604000; font-weight: bold; }
+.variable-quote             { color: #604000; font-weight: bold; }
+.variable-group             { color: #008000; font-weight: bold; }
+.variable-op                { color: #604000; font-weight: bold; }
+.variable-string            { color: #006030; }
+.variable-unknown           { color: #a00000; font-weight: bold; }
+.re                         { color: #000000; }
+.re-char                    { color: #006030; }
+.re-op                      { color: #600000; }
+.re-group                   { color: #003060; }
+.re-ref                     { color: #404040; }
+
+/* Base tree
+ *   - Used by class pages to display the base class hierarchy.
+ */
+pre.base-tree               { font-size: 80%; margin: 0; }
+
+/* Frames-based table of contents headers
+ *   - Consists of two frames: one for selecting modules; and
+ *     the other listing the contents of the selected module.
+ *   - h1.toc is used for each frame's heading
+ *   - h2.toc is used for subheadings within each frame.
+ */
+h1.toc                      { text-align: center; font-size: 105%;
+                              margin: 0; font-weight: bold;
+                              padding: 0; }
+h2.toc                      { font-size: 100%; font-weight: bold; 
+                              margin: 0.5em 0 0 -0.3em; }
+
+/* Syntax Highlighting for Source Code
+ *   - doctest examples are displayed in a 'pre.py-doctest' block.
+ *     If the example is in a details table entry, then it will use
+ *     the colors specified by the 'table pre.py-doctest' line.
+ *   - Source code listings are displayed in a 'pre.py-src' block.
+ *     Each line is marked with 'span.py-line' (used to draw a line
+ *     down the left margin, separating the code from the line
+ *     numbers).  Line numbers are displayed with 'span.py-lineno'.
+ *     The expand/collapse block toggle button is displayed with
+ *     'a.py-toggle' (Note: the CSS style for 'a.py-toggle' should not
+ *     modify the font size of the text.)
+ *   - If a source code page is opened with an anchor, then the
+ *     corresponding code block will be highlighted.  The code
+ *     block's header is highlighted with 'py-highlight-hdr'; and
+ *     the code block's body is highlighted with 'py-highlight'.
+ *   - The remaining py-* classes are used to perform syntax
+ *     highlighting (py-string for string literals, py-name for names,
+ *     etc.)
+
+pre.py-doctest              { padding: .5em; margin: 1em;
+                              background: #e8f0f8; color: #000000;
+                              border: 1px solid #708890; }
+table pre.py-doctest        { background: #dce4ec;
+                              color: #000000; }
+pre.py-src                  { border: 2px solid #000000; 
+                              background: #f0f0f0; color: #000000; }
+.py-line                    { border-left: 2px solid #000000; 
+                              margin-left: .2em; padding-left: .4em; }
+.py-lineno                  { font-style: italic; font-size: 90%;
+                              padding-left: .5em; }
+a.py-toggle                 { text-decoration: none; }
+div.py-highlight-hdr        { border-top: 2px solid #000000;
+                              border-bottom: 2px solid #000000;
+                              background: #d8e8e8; }
+div.py-highlight            { border-bottom: 2px solid #000000;
+                              background: #d0e0e0; }
+.py-prompt                  { color: #005050; font-weight: bold;}
+.py-more                    { color: #005050; font-weight: bold;}
+.py-string                  { color: #006030; }
+.py-comment                 { color: #003060; }
+.py-keyword                 { color: #600000; }
+.py-output                  { color: #404040; }
+.py-name                    { color: #000050; }
+.py-name:link               { color: #000050 !important; }
+.py-name:visited            { color: #000050 !important; }
+.py-number                  { color: #005000; }
+.py-defname                 { color: #000060; font-weight: bold; }
+.py-def-name                { color: #000060; font-weight: bold; }
+.py-base-class              { color: #000060; }
+.py-param                   { color: #000060; }
+.py-docstring               { color: #006030; }
+.py-decorator               { color: #804020; }
+ */
+/* Use this if you don't want links to names underlined: */
+/*a.py-name                   { text-decoration: none; }*/
+
+pre.py-doctest              { padding: .5em; margin: 1em;
+                              background: #e8f0f8; color: #000000;
+                              border: 1px solid #708890; }
+table pre.py-doctest        { background: #dce4ec;
+                              color: #000000; }
+pre.py-src                  { border: 2px solid #000000; 
+                              background: #f0f0f0; color: #000000; }
+.py-line                    { border-left: 2px solid #000000; 
+                              margin-left: .2em; padding-left: .4em; }
+.py-lineno                  { font-style: italic; font-size: 90%;
+                              padding-left: .5em; }
+a.py-toggle                 { text-decoration: none; }
+div.py-highlight-hdr        { border-top: 2px solid #000000;
+                              border-bottom: 2px solid #000000;
+                              background: #d8e8e8; }
+div.py-highlight            { border-bottom: 2px solid #000000;
+                              background: #d0e0e0; }
+.py-prompt                  { color: #005050; font-weight: bold;}
+.py-more                    { color: #005050; font-weight: bold;}
+.py-string                  { color: green; }
+.py-comment                 { color: green; }
+.py-keyword                 { color: blue; }
+.py-output                  { color: #404040; }
+.py-name                    { color: #585858;}
+.py-name:link               { color: #FF5C1F !important; }
+.py-name:visited            { color: #FF5C1F !important; }
+.py-number                  { color: #005000; }
+.py-defname                 { color: #FF5C1F; font-weight: bold; }
+.py-def-name                { color: #FF5C1F; font-weight: bold; }
+.py-base-class              { color: #FF5C1F; }
+.py-param                   { color: #000060; }
+.py-docstring               { color: green; }
+.py-decorator               { color: #804020; }
+
+/* Graphs & Diagrams
+ *   - These CSS styles are used for graphs & diagrams generated using
+ *     Graphviz dot.  'img.graph-without-title' is used for bare
+ *     diagrams (to remove the border created by making the image
+ *     clickable).
+ */
+img.graph-without-title     { border: none; }
+img.graph-with-title        { border: 1px solid #000000; }
+span.graph-title            { font-weight: bold; }
+span.graph-caption          { }
+
+/* General-purpose classes
+ *   - 'p.indent-wrapped-lines' defines a paragraph whose first line
+ *     is not indented, but whose subsequent lines are.
+ *   - The 'nomargin-top' class is used to remove the top margin (e.g.
+ *     from lists).  The 'nomargin' class is used to remove both the
+ *     top and bottom margin (but not the left or right margin --
+ *     for lists, that would cause the bullets to disappear.)
+ */
+p.indent-wrapped-lines      { padding: 0 0 0 7em; text-indent: -7em; 
+                              margin: 0; }
+.nomargin-top               { margin-top: 0; }
+.nomargin                   { margin-top: 0; margin-bottom: 0; }
+
+/* HTML Log */
+div.log-block               { padding: 0; margin: .5em 0 .5em 0;
+                              background: #e8f0f8; color: #000000;
+                              border: 1px solid #000000; }
+div.log-error               { padding: .1em .3em .1em .3em; margin: 4px;
+                              background: #ffb0b0; color: #000000;
+                              border: 1px solid #000000; }
+div.log-warning             { padding: .1em .3em .1em .3em; margin: 4px;
+                              background: #ffffb0; color: #000000;
+                              border: 1px solid #000000; }
+div.log-info               { padding: .1em .3em .1em .3em; margin: 4px;
+                              background: #b0ffb0; color: #000000;
+                              border: 1px solid #000000; }
+h2.log-hdr                  { background: #70b0ff; color: #000000;
+                              margin: 0; padding: 0em 0.5em 0em 0.5em;
+                              border-bottom: 1px solid #000000; font-size: 110%; }
+p.log                       { font-weight: bold; margin: .5em 0 .5em 0; }
+tr.opt-changed              { color: #000000; font-weight: bold; }
+tr.opt-default              { color: #606060; }
+pre.log                     { margin: 0; padding: 0; padding-left: 1em; }

ADDED   fcgihandler.py
Index: fcgihandler.py
==================================================================
--- /dev/null
+++ fcgihandler.py
@@ -0,0 +1,53 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro 
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+This is a handler for lighttpd+fastcgi
+This file has to be in the PYTHONPATH
+Put something like this in the lighttpd.conf file:
+
+server.port = 8000
+server.bind = '127.0.0.1'
+server.event-handler = 'freebsd-kqueue'
+server.modules = ('mod_rewrite', 'mod_fastcgi')
+server.error-handler-404 = '/test.fcgi'
+server.document-root = '/somewhere/web2py'
+server.errorlog      = '/tmp/error.log'
+fastcgi.server = ('.fcgi' =>
+                    ('localhost' =>
+                        ('min-procs' => 1,
+                         'socket'    => '/tmp/fcgi.sock'
+                        )
+                    )
+                 )
+"""
+
+LOGGING = False
+SOFTCRON = False
+
+import sys
+import os
+
+path = os.path.dirname(os.path.abspath(__file__))
+os.chdir(path)
+sys.path = [path]+[p for p in sys.path if not p==path]
+
+import gluon.main
+import gluon.contrib.gateways.fcgi as fcgi
+
+if LOGGING:
+    application = gluon.main.appfactory(wsgiapp=gluon.main.wsgibase,
+                                        logfilename='httpserver.log',
+                                        profilerfilename=None)
+else:
+    application = gluon.main.wsgibase
+
+if SOFTCRON:
+    from gluon.settings import global_settings
+    global_settings.web2py_crontype = 'soft'
+
+fcgi.WSGIServer(application, bindAddress='/tmp/fcgi.sock').run()

ADDED   gaehandler.py
Index: gaehandler.py
==================================================================
--- /dev/null
+++ gaehandler.py
@@ -0,0 +1,115 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro 
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+"""
+
+##############################################################################
+# Configuration parameters for Google App Engine
+##############################################################################
+KEEP_CACHED = False    # request a dummy url every 10secs to force caching app
+LOG_STATS = False      # web2py level log statistics
+APPSTATS = True         # GAE level usage statistics and profiling
+DEBUG = False          # debug mode
+AUTO_RETRY = True      # force gae to retry commit on failure
+#
+# Read more about APPSTATS here
+#   http://googleappengine.blogspot.com/2010/03/easy-performance-profiling-with.html
+# can be accessed from:
+#   http://localhost:8080/_ah/stats
+##############################################################################
+# All tricks in this file developed by Robin Bhattacharyya
+##############################################################################
+
+
+import time
+import os
+import sys
+import logging
+import cPickle
+import pickle
+import wsgiref.handlers
+import datetime
+
+path = os.path.dirname(os.path.abspath(__file__))
+sys.path = [path]+[p for p in sys.path if not p==path]
+
+sys.modules['cPickle'] = sys.modules['pickle']
+
+
+from gluon.settings import global_settings
+from google.appengine.api.labs import taskqueue
+from google.appengine.ext import webapp
+from google.appengine.ext.webapp.util import run_wsgi_app
+
+
+global_settings.web2py_runtime_gae = True
+global_settings.db_sessions = True
+if os.environ.get('SERVER_SOFTWARE', '').startswith('Devel'):
+    (global_settings.web2py_runtime, DEBUG) = \
+        ('gae:development', True)
+else:
+    (global_settings.web2py_runtime, DEBUG) = \
+        ('gae:production', False)
+
+
+import gluon.main
+
+
+def log_stats(fun):
+    """Function that will act as a decorator to make logging"""
+    def newfun(env, res):
+        """Log the execution time of the passed function"""
+        timer = lambda t: (t.time(), t.clock())
+        (t0, c0) = timer(time)
+        executed_function = fun(env, res)
+        (t1, c1) = timer(time)
+        log_info = """**** Request: %.2fms/%.2fms (real time/cpu time)"""
+        log_info = log_info % ((t1 - t0) * 1000, (c1 - c0) * 1000)
+        logging.info(log_info)
+        return executed_function
+    return newfun
+
+
+logging.basicConfig(level=logging.INFO)
+
+
+def wsgiapp(env, res):
+    """Return the wsgiapp"""
+    if env['PATH_INFO'] == '/_ah/queue/default':
+        if KEEP_CACHED:
+            delta = datetime.timedelta(seconds=10)
+            taskqueue.add(eta=datetime.datetime.now() + delta)
+        res('200 OK',[('Content-Type','text/plain')])
+        return ['']
+    env['PATH_INFO'] = env['PATH_INFO'].encode('utf8')
+
+    #this deals with a problem where GAE development server seems to forget
+    # the path between requests
+    if global_settings.web2py_runtime == 'gae:development':
+        gluon.admin.create_missing_folders()
+
+    return gluon.main.wsgibase(env, res)
+
+
+if LOG_STATS or DEBUG:
+    wsgiapp = log_stats(wsgiapp)
+
+
+if AUTO_RETRY:
+    from gluon.contrib.gae_retry import autoretry_datastore_timeouts
+    autoretry_datastore_timeouts()
+
+
+def main():
+    """Run the wsgi app"""
+    if APPSTATS:
+        run_wsgi_app(wsgiapp)
+    else:
+        wsgiref.handlers.CGIHandler().run(wsgiapp)
+
+if __name__ == '__main__':
+    main()

ADDED   gluon/__init__.py
Index: gluon/__init__.py
==================================================================
--- /dev/null
+++ gluon/__init__.py
@@ -0,0 +1,21 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro 
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+
+Web2Py framework modules
+========================
+"""
+
+__all__ = ['A', 'B', 'BEAUTIFY', 'BODY', 'BR', 'CAT', 'CENTER', 'CLEANUP', 'CODE', 'CRYPT', 'DAL', 'DIV', 'EM', 'EMBED', 'FIELDSET', 'FORM', 'Field', 'H1', 'H2', 'H3', 'H4', 'H5', 'H6', 'HEAD', 'HR', 'HTML', 'HTTP', 'I', 'IFRAME', 'IMG', 'INPUT', 'IS_ALPHANUMERIC', 'IS_DATE', 'IS_DATETIME', 'IS_DATETIME_IN_RANGE', 'IS_DATE_IN_RANGE', 'IS_DECIMAL_IN_RANGE', 'IS_EMAIL', 'IS_EMPTY_OR', 'IS_EQUAL_TO', 'IS_EXPR', 'IS_FLOAT_IN_RANGE', 'IS_IMAGE', 'IS_INT_IN_RANGE', 'IS_IN_DB', 'IS_IN_SET', 'IS_IPV4', 'IS_LENGTH', 'IS_LIST_OF', 'IS_LOWER', 'IS_MATCH', 'IS_NOT_EMPTY', 'IS_NOT_IN_DB', 'IS_NULL_OR', 'IS_SLUG', 'IS_STRONG', 'IS_TIME', 'IS_UPLOAD_FILENAME', 'IS_UPPER', 'IS_URL', 'LABEL', 'LEGEND', 'LI', 'LINK', 'MARKMIN', 'MENU', 'META', 'OBJECT', 'OL', 'ON', 'OPTGROUP', 'OPTION', 'P', 'PRE', 'SCRIPT', 'SELECT', 'SPAN', 'SQLFORM', 'SQLTABLE', 'STYLE', 'TABLE', 'TAG', 'TBODY', 'TD', 'TEXTAREA', 'TFOOT', 'TH', 'THEAD', 'TITLE', 'TR', 'TT', 'UL', 'URL', 'XHTML', 'XML','redirect','current','embed64']
+
+from globals import current
+from html import *
+from validators import *
+from http import redirect, HTTP
+from dal import DAL, Field
+from sqlhtml import SQLFORM, SQLTABLE
+

ADDED   gluon/admin.py
Index: gluon/admin.py
==================================================================
--- /dev/null
+++ gluon/admin.py
@@ -0,0 +1,453 @@
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro 
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+Utility functions for the Admin application
+===========================================
+"""
+import os
+import sys
+import traceback
+import zipfile
+import urllib
+from shutil import rmtree
+from utils import web2py_uuid
+from fileutils import w2p_pack, w2p_unpack, w2p_pack_plugin, w2p_unpack_plugin
+from fileutils import up, fix_newlines, abspath, recursive_unlink
+from fileutils import read_file, write_file
+from restricted import RestrictedError
+from settings import global_settings
+
+def apath(path='', r=None):
+    """
+    Builds a path inside an application folder
+
+    Parameters
+    ----------
+    path:
+        path within the application folder
+    r:
+        the global request object
+
+    """
+
+    opath = up(r.folder)
+    while path[:3] == '../':
+        (opath, path) = (up(opath), path[3:])
+    return os.path.join(opath, path).replace('\\', '/')
+
+
+def app_pack(app, request):
+    """
+    Builds a w2p package for the application
+
+    Parameters
+    ----------
+    app:
+        application name
+    request:
+        the global request object
+
+    Returns
+    -------
+    filename:
+        filename of the w2p file or None on error
+    """
+    try:
+        app_cleanup(app, request)
+        filename = apath('../deposit/%s.w2p' % app, request)
+        w2p_pack(filename, apath(app, request))
+        return filename
+    except Exception:
+        return False
+
+
+def app_pack_compiled(app, request):
+    """
+    Builds a w2p bytecode-compiled package for the application
+
+    Parameters
+    ----------
+    app:
+        application name
+    request:
+        the global request object
+
+    Returns
+    -------
+    filename:
+        filename of the w2p file or None on error
+    """
+
+    try:
+        filename = apath('../deposit/%s.w2p' % app, request)
+        w2p_pack(filename, apath(app, request), compiled=True)
+        return filename
+    except Exception:
+        return None
+
+def app_cleanup(app, request):
+    """
+    Removes session, cache and error files
+
+    Parameters
+    ----------
+    app:
+        application name
+    request:
+        the global request object
+    """
+    r = True
+
+    # Remove error files
+    path = apath('%s/errors/' % app, request)
+    if os.path.exists(path):
+        for f in os.listdir(path):
+            try:
+                if f[:1]!='.': os.unlink(os.path.join(path,f))
+            except IOError:
+                r = False
+
+    # Remove session files
+    path = apath('%s/sessions/' % app, request)
+    if os.path.exists(path):
+        for f in os.listdir(path):
+            try:
+                if f[:1]!='.': recursive_unlink(os.path.join(path,f))
+            except IOError:
+                r = False
+
+    # Remove cache files
+    path = apath('%s/sessions/' % app, request)
+    if os.path.exists(path):
+        for f in os.listdir(path):
+            try:
+                if f[:1]!='.': os.unlink(os.path.join(path,f))
+            except IOError:
+                r = False
+    return r
+
+
+def app_compile(app, request):
+    """
+    Compiles the application
+
+    Parameters
+    ----------
+    app:
+        application name
+    request:
+        the global request object
+    """
+    from compileapp import compile_application, remove_compiled_application
+    folder = apath(app, request)
+    try:
+        compile_application(folder)
+        return None
+    except (Exception, RestrictedError):
+        tb = traceback.format_exc(sys.exc_info)
+        remove_compiled_application(folder)
+        return tb
+
+def app_create(app, request,force=False,key=None):
+    """
+    Create a copy of welcome.w2p (scaffolding) app
+
+    Parameters
+    ----------
+    app:
+        application name
+    request:
+        the global request object
+
+    """
+    try:
+        path = apath(app, request)
+        os.mkdir(path)
+    except:
+        if not force:
+            return False
+    try:
+        w2p_unpack('welcome.w2p', path)
+        for subfolder in ['models','views','controllers', 'databases',
+                          'modules','cron','errors','sessions',
+                          'languages','static','private','uploads']:
+            subpath =  os.path.join(path,subfolder)
+            if not os.path.exists(subpath):
+                os.mkdir(subpath)
+        db = os.path.join(path, 'models', 'db.py')
+        if os.path.exists(db):
+            data = read_file(db)
+            data = data.replace('',
+                                'sha512:'+(key or web2py_uuid()))
+            write_file(db, data)
+        return True
+    except:
+        rmtree(path)
+        return False
+
+
+def app_install(app, fobj, request, filename, overwrite=None):
+    """
+    Installs an application:
+
+    - Identifies file type by filename
+    - Writes `fobj` contents to the `../deposit/` folder
+    - Calls `w2p_unpack()` to do the job.
+
+    Parameters
+    ----------
+    app:
+        new application name
+    fobj:
+        file object containing the application to be installed
+    request:
+        the global request object
+    filename:
+        original filename of the `fobj`, required to determine extension
+
+    Returns
+    -------
+    upname:
+        name of the file where app is temporarily stored or `None` on failure
+    """
+    did_mkdir = False
+    if filename[-4:] == '.w2p':
+        extension = 'w2p'
+    elif filename[-7:] == '.tar.gz':
+        extension = 'tar.gz'
+    else:
+        extension = 'tar'
+    upname = apath('../deposit/%s.%s' % (app, extension), request)
+
+    try:
+        write_file(upname, fobj.read(), 'wb')
+        path = apath(app, request)
+        if not overwrite:
+            os.mkdir(path)
+            did_mkdir = True
+        w2p_unpack(upname, path)
+        if extension != 'tar':
+            os.unlink(upname)
+        fix_newlines(path)
+        return upname
+    except Exception:
+        if did_mkdir:
+            rmtree(path)
+        return False
+
+
+def app_uninstall(app, request):
+    """
+    Uninstalls the application.
+
+    Parameters
+    ----------
+    app:
+        application name
+    request:
+        the global request object
+
+    Returns
+    -------
+    `True` on success, `False` on failure
+    """
+    try:
+        # Hey App, this is your end...
+        path = apath(app, request)
+        rmtree(path)
+        return True
+    except Exception:
+        return False
+
+def plugin_pack(app, plugin_name, request):
+    """
+    Builds a w2p package for the application
+
+    Parameters
+    ----------
+    app:
+        application name
+    plugin_name:
+        the name of the plugin without plugin_ prefix
+    request:
+        the current request app
+
+    Returns
+    -------
+    filename:
+        filename of the w2p file or None on error
+    """
+    try:
+        filename = apath('../deposit/web2py.plugin.%s.w2p' % plugin_name, request)
+        w2p_pack_plugin(filename, apath(app, request), plugin_name)
+        return filename
+    except Exception:
+        return False
+
+def plugin_install(app, fobj, request, filename):
+    """
+    Installs an application:
+
+    - Identifies file type by filename
+    - Writes `fobj` contents to the `../deposit/` folder
+    - Calls `w2p_unpack()` to do the job.
+
+    Parameters
+    ----------
+    app:
+        new application name
+    fobj:
+        file object containing the application to be installed
+    request:
+        the global request object
+    filename:
+        original filename of the `fobj`, required to determine extension
+
+    Returns
+    -------
+    upname:
+        name of the file where app is temporarily stored or `None` on failure
+    """
+
+    upname = apath('../deposit/%s' % filename, request)
+
+    try:
+        write_file(upname, fobj.read(), 'wb')
+        path = apath(app, request)
+        w2p_unpack_plugin(upname, path)
+        fix_newlines(path)
+        return upname
+    except Exception:
+        os.unlink(upname)
+        return False
+
+def check_new_version(myversion, version_URL):
+    """
+    Compares current web2py's version with the latest stable web2py version.
+
+    Parameters
+    ----------
+    myversion:
+        the current version as stored in file `web2py/VERSION`
+    version_URL:
+        the URL that contains the version of the latest stable release
+
+    Returns
+    -------
+    state:
+        `True` if upgrade available, `False` if current version if up-to-date,
+        -1 on error
+    version:
+        the most up-to-version available
+    """
+    try:
+        from urllib import urlopen
+        version = urlopen(version_URL).read()
+    except Exception:
+        return -1, myversion
+
+    if version > myversion:
+        return True, version
+    else:
+        return False, version
+
+def unzip(filename, dir, subfolder=''):
+    """
+    Unzips filename into dir (.zip only, no .gz etc)
+    if subfolder!='' it unzip only files in subfolder
+    """
+    filename = abspath(filename)
+    if not zipfile.is_zipfile(filename):
+        raise RuntimeError, 'Not a valid zipfile'
+    zf = zipfile.ZipFile(filename)
+    if not subfolder.endswith('/'):
+        subfolder = subfolder + '/'
+    n = len(subfolder)
+    for name in sorted(zf.namelist()):
+        if not name.startswith(subfolder):
+            continue
+        #print name[n:]
+        if name.endswith('/'):
+            folder = os.path.join(dir,name[n:])
+            if not os.path.exists(folder):
+                os.mkdir(folder)
+        else:
+            write_file(os.path.join(dir, name[n:]), zf.read(name), 'wb')
+
+
+def upgrade(request, url='http://web2py.com'):
+    """
+    Upgrades web2py (src, osx, win) is a new version is posted.
+    It detects whether src, osx or win is running and downloads the right one
+
+    Parameters
+    ----------
+    request:
+        the current request object, required to determine version and path
+    url:
+        the incomplete url where to locate the latest web2py
+        actual url is url+'/examples/static/web2py_(src|osx|win).zip'
+
+    Returns
+    -------
+        True on success, False on failure (network problem or old version)
+    """
+    web2py_version = request.env.web2py_version
+    gluon_parent = request.env.gluon_parent
+    if not gluon_parent.endswith('/'):
+        gluon_parent = gluon_parent + '/'
+    (check, version) = check_new_version(web2py_version,
+                                         url+'/examples/default/version')
+    if not check:
+        return (False, 'Already latest version')
+    if os.path.exists(os.path.join(gluon_parent, 'web2py.exe')):
+        version_type = 'win'
+        destination = gluon_parent
+        subfolder = 'web2py/'
+    elif gluon_parent.endswith('/Contents/Resources/'):
+        version_type = 'osx'
+        destination = gluon_parent[:-len('/Contents/Resources/')]
+        subfolder = 'web2py/web2py.app/'
+    else:
+        version_type = 'src'
+        destination = gluon_parent
+        subfolder = 'web2py/'
+
+    full_url = url + '/examples/static/web2py_%s.zip' % version_type
+    filename = abspath('web2py_%s_downloaded.zip' % version_type)
+    file = None
+    try:
+        write_file(filename, urllib.urlopen(full_url).read(), 'wb')
+    except Exception,e:
+        return False, e
+    try:
+        unzip(filename, destination, subfolder)
+        return True, None
+    except Exception,e:
+        return False, e
+
+def add_path_first(path):
+    sys.path = [path]+[p for p in sys.path if (not p==path and not p==(path+'/'))]
+
+def create_missing_folders():
+    if not global_settings.web2py_runtime_gae:
+        for path in ('applications', 'deposit', 'site-packages', 'logs'):
+            path = abspath(path, gluon=True)
+            if not os.path.exists(path):
+                os.mkdir(path)
+    paths = (global_settings.gluon_parent, abspath('site-packages', gluon=True),  abspath('gluon', gluon=True), '')
+    [add_path_first(path) for path in paths]
+
+def create_missing_app_folders(request):
+    if not global_settings.web2py_runtime_gae:
+        if request.folder not in global_settings.app_folders:
+            for subfolder in ('models', 'views', 'controllers', 'databases',
+                              'modules', 'cron', 'errors', 'sessions',
+                              'languages', 'static', 'private', 'uploads'):
+                path =  os.path.join(request.folder, subfolder)
+                if not os.path.exists(path):
+                    os.mkdir(path)
+            global_settings.app_folders.add(request.folder)
+

ADDED   gluon/cfs.py
Index: gluon/cfs.py
==================================================================
--- /dev/null
+++ gluon/cfs.py
@@ -0,0 +1,51 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro 
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+Functions required to execute app components
+============================================
+
+FOR INTERNAL USE ONLY
+"""
+
+import os
+import stat
+import thread
+from fileutils import read_file
+
+cfs = {}  # for speed-up
+cfs_lock = thread.allocate_lock()  # and thread safety
+
+
+def getcfs(key, filename, filter=None):
+    """
+    Caches the *filtered* file `filename` with `key` until the file is
+    modified.
+
+    :param key: the cache key
+    :param filename: the file to cache
+    :param filter: is the function used for filtering. Normally `filename` is a
+        .py file and `filter` is a function that bytecode compiles the file.
+        In this way the bytecode compiled file is cached. (Default = None)
+
+    This is used on Google App Engine since pyc files cannot be saved.
+    """
+    t = os.stat(filename)[stat.ST_MTIME]
+    cfs_lock.acquire()
+    item = cfs.get(key, None)
+    cfs_lock.release()
+    if item and item[0] == t:
+        return item[1]
+    if not filter:
+        data = read_file(filename)
+    else:
+        data = filter()
+    cfs_lock.acquire()
+    cfs[key] = (t, data)
+    cfs_lock.release()
+    return data
+

ADDED   gluon/compileapp.py
Index: gluon/compileapp.py
==================================================================
--- /dev/null
+++ gluon/compileapp.py
@@ -0,0 +1,571 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro 
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+Functions required to execute app components
+============================================
+
+FOR INTERNAL USE ONLY
+"""
+
+import re
+import sys
+import fnmatch
+import os
+import copy
+import random
+import __builtin__
+from storage import Storage, List
+from template import parse_template
+from restricted import restricted, compile2
+from fileutils import mktree, listdir, read_file, write_file
+from myregex import regex_expose
+from languages import translator
+from dal import BaseAdapter, SQLDB, SQLField, DAL, Field
+from sqlhtml import SQLFORM, SQLTABLE
+from cache import Cache
+from globals import current
+import settings
+from cfs import getcfs
+import html
+import validators
+from http import HTTP, redirect
+import marshal
+import shutil
+import imp
+import logging
+logger = logging.getLogger("web2py")
+import rewrite
+
+try:
+    import py_compile
+except:
+    logger.warning('unable to import py_compile')
+
+is_gae = settings.global_settings.web2py_runtime_gae
+is_jython = settings.global_settings.is_jython = 'java' in sys.platform.lower() or hasattr(sys, 'JYTHON_JAR') or str(sys.copyright).find('Jython') > 0
+
+TEST_CODE = \
+    r"""
+def _TEST():
+    import doctest, sys, cStringIO, types, cgi, gluon.fileutils
+    if not gluon.fileutils.check_credentials(request):
+        raise HTTP(401, web2py_error='invalid credentials')
+    stdout = sys.stdout
+    html = '
    Testing controller "%s.py" ... done.

    \n' \
+        % request.controller
+    for key in sorted([key for key in globals() if not key in __symbols__+['_TEST']]):
+        eval_key = eval(key)
+        if type(eval_key) == types.FunctionType:
+            number_doctests = sum([len(ds.examples) for ds in doctest.DocTestFinder().find(eval_key)])
+            if number_doctests>0:
+                sys.stdout = cStringIO.StringIO()
+                name = '%s/controllers/%s.py in %s.__doc__' \
+                    % (request.folder, request.controller, key)
+                doctest.run_docstring_examples(eval_key,
+                    globals(), False, name=name)
+                report = sys.stdout.getvalue().strip()
+                if report:
+                    pf = 'failed'
+                else:
+                    pf = 'passed'
+                html += '
    Function %s [%s]
    \n' \
+                    % (pf, key, pf)
+                if report:
+                    html += CODE(report, language='web2py', \
+                        link='/examples/global/vars/').xml()
+                html += '
    \n'
+            else:
+                html += \
+                    '
    Function %s [no doctests]

    \n' \
+                    % (key)
+    response._vars = html
+    sys.stdout = stdout
+_TEST()
+"""
+
+class mybuiltin(object):
+    """
+    NOTE could simple use a dict and populate it, 
+    NOTE not sure if this changes things though if monkey patching import.....
+    """
+    #__builtins__
+    def __getitem__(self, key):
+        try:
+            return getattr(__builtin__, key)
+        except AttributeError:
+            raise KeyError, key            
+    def __setitem__(self, key, value):
+        setattr(self, key, value)
+
+class LoadFactory(object):
+    """
+    Attention: this helper is new and experimental
+    """
+    def __init__(self,environment):
+        self.environment = environment
+    def __call__(self, c=None, f='index', args=[], vars={},
+                 extension=None, target=None,ajax=False,ajax_trap=False,
+                 url=None,user_signature=False, content='loading...',**attr):
+        import globals
+        target = target or 'c'+str(random.random())[2:]
+        attr['_id']=target
+        request = self.environment['request']
+        if not isinstance(vars,Storage):
+            vars = Storage(vars)
+        if '.' in f:
+            f, extension = f.split('.',1)
+        if url or ajax:
+            url = url or html.URL(request.application, c, f, r=request,
+                                  args=args, vars=vars, extension=extension,
+                                  user_signature=user_signature)
+            script = html.SCRIPT('web2py_component("%s","%s")' % (url, target),
+                                 _type="text/javascript")
+            return html.TAG[''](script, html.DIV(content,**attr))
+        else:
+            if not isinstance(args,(list,tuple)):
+                args = [args]
+            c = c or request.controller
+
+            other_request = Storage()
+            for key, value in request.items():
+                other_request[key] = value
+            other_request['env'] = Storage()
+            for key, value in request.env.items():
+                other_request.env['key'] = value 
+            other_request.controller = c
+            other_request.function = f
+            other_request.extension = extension or request.extension
+            other_request.args = List(args)
+            other_request.vars = vars
+            other_request.get_vars = vars
+            other_request.post_vars = Storage()
+            other_response = globals.Response()
+            other_request.env.path_info = '/' + \
+                '/'.join([request.application,c,f] + \
+                             map(str, other_request.args))
+            other_request.env.query_string = \
+                vars and html.URL(vars=vars).split('?')[1] or ''
+            other_request.env.http_web2py_component_location = \
+                request.env.path_info            
+            other_request.cid = target
+            other_request.env.http_web2py_component_element = target
+            other_response.view = '%s/%s.%s' % (c,f, other_request.extension)
+            other_environment = copy.copy(self.environment)
+            other_response._view_environment = other_environment
+            other_response.generic_patterns = \
+                copy.copy(current.response.generic_patterns)
+            other_environment['request'] = other_request
+            other_environment['response'] = other_response
+
+            ## some magic here because current are thread-locals
+
+            original_request, current.request = current.request, other_request
+            original_response, current.response = current.response, other_response
+            page = run_controller_in(c, f, other_environment)
+            if isinstance(page, dict):
+                other_response._vars = page
+                for key in page:
+                    other_response._view_environment[key] = page[key]
+                run_view_in(other_response._view_environment)
+                page = other_response.body.getvalue()
+            current.request, current.response = original_request, original_response
+            js = None
+            if ajax_trap:
+                link = html.URL(request.application, c, f, r=request,
+                                args=args, vars=vars, extension=extension,
+                                user_signature=user_signature)
+                js = "web2py_trap_form('%s','%s');" % (link, target)
+            script = js and html.SCRIPT(js,_type="text/javascript") or ''
+            return html.TAG[''](html.DIV(html.XML(page),**attr),script)
+
+
+def local_import_aux(name, force=False, app='welcome'):
+    """
+    In apps, instead of importing a local module
+    (in applications/app/modules) with::
+
+       import a.b.c as d
+
+    you should do::
+
+       d = local_import('a.b.c')
+
+    or (to force a reload):
+
+       d = local_import('a.b.c', reload=True)
+
+    This prevents conflict between applications and un-necessary execs.
+    It can be used to import any module, including regular Python modules.
+    """
+    items = name.replace('/','.')
+    name = "applications.%s.modules.%s" % (app, items)
+    module = __import__(name)
+    for item in name.split(".")[1:]:
+        module = getattr(module, item)
+    if force:
+        reload(module)
+    return module
+
+
+"""
+OLD IMPLEMENTATION:
+    items = name.replace('/','.').split('.')
+    filename, modulepath = items[-1], os.path.join(apath,'modules',*items[:-1])
+    imp.acquire_lock()
+    try:
+        file=None
+        (file,path,desc) = imp.find_module(filename,[modulepath]+sys.path)
+        if not path in sys.modules or reload:
+            if is_gae:
+                module={}
+                execfile(path,{},module)
+                module=Storage(module)
+            else:
+                module = imp.load_module(path,file,path,desc)
+            sys.modules[path] = module
+        else:
+            module = sys.modules[path]
+    except Exception, e:
+        module = None
+    if file:
+        file.close()
+    imp.release_lock()
+    if not module:
+        raise ImportError, "cannot find module %s in %s" % (filename, modulepath)
+    return module
+"""
+
+def build_environment(request, response, session, store_current=True):
+    """
+    Build the environment dictionary into which web2py files are executed.
+    """
+
+    environment = {}
+    for key in html.__all__:
+        environment[key] = getattr(html, key)
+    for key in validators.__all__:
+        environment[key] = getattr(validators, key)
+    if not request.env:
+        request.env = Storage()
+
+    t = environment['T'] = translator(request)
+    c = environment['cache'] = Cache(request)
+    if store_current:
+        current.request = request
+        current.response = response
+        current.session = session
+        current.T = t
+        current.cache = c
+
+    global __builtins__
+    if is_jython: # jython hack
+        __builtins__ = mybuiltin()
+    else:
+        __builtins__['__import__'] = __builtin__.__import__
+    environment['__builtins__'] = __builtins__
+    environment['HTTP'] = HTTP
+    environment['redirect'] = redirect
+    environment['request'] = request
+    environment['response'] = response
+    environment['session'] = session
+    environment['DAL'] = DAL
+    environment['Field'] = Field
+    environment['SQLDB'] = SQLDB        # for backward compatibility
+    environment['SQLField'] = SQLField  # for backward compatibility
+    environment['SQLFORM'] = SQLFORM
+    environment['SQLTABLE'] = SQLTABLE
+    environment['LOAD'] = LoadFactory(environment)
+    environment['local_import'] = \
+        lambda name, reload=False, app=request.application:\
+        local_import_aux(name,reload,app)
+    BaseAdapter.set_folder(os.path.join(request.folder, 'databases'))
+    response._view_environment = copy.copy(environment)
+    return environment
+
+
+def save_pyc(filename):
+    """
+    Bytecode compiles the file `filename`
+    """
+    py_compile.compile(filename)
+
+
+def read_pyc(filename):
+    """
+    Read the code inside a bytecode compiled file if the MAGIC number is
+    compatible
+
+    :returns: a code object
+    """
+    data = read_file(filename, 'rb')
+    if not is_gae and data[:4] != imp.get_magic():
+        raise SystemError, 'compiled code is incompatible'
+    return marshal.loads(data[8:])
+
+
+def compile_views(folder):
+    """
+    Compiles all the views in the application specified by `folder`
+    """
+
+    path = os.path.join(folder, 'views')
+    for file in listdir(path, '^[\w/]+\.\w+$'):
+        data = parse_template(file, path)
+        filename = ('views/%s.py' % file).replace('/', '_').replace('\\', '_')
+        filename = os.path.join(folder, 'compiled', filename)
+        write_file(filename, data)
+        save_pyc(filename)
+        os.unlink(filename)
+
+
+def compile_models(folder):
+    """
+    Compiles all the models in the application specified by `folder`
+    """
+
+    path = os.path.join(folder, 'models')
+    for file in listdir(path, '.+\.py$'):
+        data = read_file(os.path.join(path, file))
+        filename = os.path.join(folder, 'compiled','models',file)
+        mktree(filename)
+        write_file(filename, data)
+        save_pyc(filename)
+        os.unlink(filename)
+
+
+def compile_controllers(folder):
+    """
+    Compiles all the controllers in the application specified by `folder`
+    """
+
+    path = os.path.join(folder, 'controllers')
+    for file in listdir(path, '.+\.py$'):
+        ### why is this here? save_pyc(os.path.join(path, file))
+        data = read_file(os.path.join(path,file))
+        exposed = regex_expose.findall(data)
+        for function in exposed:
+            command = data + "\nresponse._vars=response._caller(%s)\n" % \
+                function
+            filename = os.path.join(folder, 'compiled', ('controllers/'
+                                     + file[:-3]).replace('/', '_')
+                                     + '_' + function + '.py')
+            write_file(filename, command)
+            save_pyc(filename)
+            os.unlink(filename)
+
+
+def run_models_in(environment):
+    """
+    Runs all models (in the app specified by the current folder)
+    It tries pre-compiled models first before compiling them.
+    """
+
+    folder = environment['request'].folder
+    c = environment['request'].controller
+    f = environment['request'].function
+    cpath = os.path.join(folder, 'compiled')
+    if os.path.exists(cpath):
+        for model in listdir(cpath, '^models_\w+\.pyc$', 0):
+            restricted(read_pyc(model), environment, layer=model)
+        path = os.path.join(cpath, 'models')
+        models = listdir(path, '^\w+\.pyc$',0,sort=False)
+        compiled=True
+    else:
+        path = os.path.join(folder, 'models')
+        models = listdir(path, '^\w+\.py$',0,sort=False)
+        compiled=False
+    paths = (path, os.path.join(path,c), os.path.join(path,c,f))
+    for model in models:
+        if not os.path.split(model)[0] in paths and c!='appadmin':
+            continue
+        elif compiled:
+            code = read_pyc(model)
+        elif is_gae:
+            code = getcfs(model, model,
+                          lambda: compile2(read_file(model), model))
+        else:
+            code = getcfs(model, model, None)
+        restricted(code, environment, layer=model)
+
+
+def run_controller_in(controller, function, environment):
+    """
+    Runs the controller.function() (for the app specified by
+    the current folder).
+    It tries pre-compiled controller_function.pyc first before compiling it.
+    """
+
+    # if compiled should run compiled!
+
+    folder = environment['request'].folder
+    path = os.path.join(folder, 'compiled')
+    badc = 'invalid controller (%s/%s)' % (controller, function)
+    badf = 'invalid function (%s/%s)' % (controller, function)
+    if os.path.exists(path):
+        filename = os.path.join(path, 'controllers_%s_%s.pyc'
+                                 % (controller, function))
+        if not os.path.exists(filename):
+            raise HTTP(404,
+                       rewrite.thread.routes.error_message % badf,
+                       web2py_error=badf)
+        restricted(read_pyc(filename), environment, layer=filename)
+    elif function == '_TEST':
+        # TESTING: adjust the path to include site packages
+        from settings import global_settings
+        from admin import abspath, add_path_first
+        paths = (global_settings.gluon_parent, abspath('site-packages', gluon=True),  abspath('gluon', gluon=True), '')
+        [add_path_first(path) for path in paths]
+        # TESTING END
+
+        filename = os.path.join(folder, 'controllers/%s.py'
+                                 % controller)
+        if not os.path.exists(filename):
+            raise HTTP(404,
+                       rewrite.thread.routes.error_message % badc,
+                       web2py_error=badc)
+        environment['__symbols__'] = environment.keys()
+        code = read_file(filename)
+        code += TEST_CODE
+        restricted(code, environment, layer=filename)
+    else:
+        filename = os.path.join(folder, 'controllers/%s.py'
+                                 % controller)
+        if not os.path.exists(filename):
+            raise HTTP(404,
+                       rewrite.thread.routes.error_message % badc,
+                       web2py_error=badc)
+        code = read_file(filename)
+        exposed = regex_expose.findall(code)
+        if not function in exposed:
+            raise HTTP(404,
+                       rewrite.thread.routes.error_message % badf,
+                       web2py_error=badf)
+        code = "%s\nresponse._vars=response._caller(%s)\n" % (code, function)
+        if is_gae:
+            layer = filename + ':' + function
+            code = getcfs(layer, filename,  lambda: compile2(code,layer))
+        restricted(code, environment, filename)
+    response = environment['response']
+    vars=response._vars
+    if response.postprocessing:
+        for p in response.postprocessing:
+            vars = p(vars)
+    if isinstance(vars,unicode):
+        vars = vars.encode('utf8')
+    if hasattr(vars,'xml'):
+        vars = vars.xml()
+    return vars
+
+def run_view_in(environment):
+    """
+    Executes the view for the requested action.
+    The view is the one specified in `response.view` or determined by the url
+    or `view/generic.extension`
+    It tries the pre-compiled views_controller_function.pyc before compiling it.
+    """
+
+    request = environment['request']
+    response = environment['response']
+    folder = request.folder
+    path = os.path.join(folder, 'compiled')
+    badv = 'invalid view (%s)' % response.view
+    patterns = response.generic_patterns or []
+    regex = re.compile('|'.join(fnmatch.translate(r) for r in patterns))
+    short_action =  '%(controller)s/%(function)s.%(extension)s' % request
+    allow_generic = patterns and regex.search(short_action)
+    if not isinstance(response.view, str):
+        ccode = parse_template(response.view, os.path.join(folder, 'views'),
+                               context=environment)
+        restricted(ccode, environment, 'file stream')
+    elif os.path.exists(path):
+        x = response.view.replace('/', '_')
+        files = ['views_%s.pyc' % x]
+        if allow_generic:
+            files.append('views_generic.%s.pyc' % request.extension)
+        # for backward compatibility
+        if request.extension == 'html':
+            files.append('views_%s.pyc' % x[:-5])
+            if allow_generic:
+                files.append('views_generic.pyc')
+        # end backward compatibility code
+        for f in files:
+            filename = os.path.join(path,f)
+            if os.path.exists(filename):
+                code = read_pyc(filename)
+                restricted(code, environment, layer=filename)
+                return
+        raise HTTP(404,
+                   rewrite.thread.routes.error_message % badv,
+                   web2py_error=badv)
+    else:
+        filename = os.path.join(folder, 'views', response.view)
+        if not os.path.exists(filename) and allow_generic:
+            response.view = 'generic.' + request.extension
+            filename = os.path.join(folder, 'views', response.view)
+        if not os.path.exists(filename):
+            raise HTTP(404,
+                       rewrite.thread.routes.error_message % badv,
+                       web2py_error=badv)
+        layer = filename
+        if is_gae:
+            ccode = getcfs(layer, filename,
+                           lambda: compile2(parse_template(response.view,
+                                            os.path.join(folder, 'views'),
+                                            context=environment),layer))
+        else:
+            ccode = parse_template(response.view,
+                                   os.path.join(folder, 'views'),
+                                   context=environment)
+        restricted(ccode, environment, layer)
+
+def remove_compiled_application(folder):
+    """
+    Deletes the folder `compiled` containing the compiled application.
+    """
+    try:
+        shutil.rmtree(os.path.join(folder, 'compiled'))
+        path = os.path.join(folder, 'controllers')
+        for file in listdir(path,'.*\.pyc$',drop=False):
+            os.unlink(file)
+    except OSError:
+        pass
+
+
+def compile_application(folder):
+    """
+    Compiles all models, views, controller for the application in `folder`.
+    """
+    remove_compiled_application(folder)
+    os.mkdir(os.path.join(folder, 'compiled'))
+    compile_models(folder)
+    compile_controllers(folder)
+    compile_views(folder)
+
+
+def test():
+    """
+    Example::
+
+        >>> import traceback, types
+        >>> environment={'x':1}
+        >>> open('a.py', 'w').write('print 1/x')
+        >>> save_pyc('a.py')
+        >>> os.unlink('a.py')
+        >>> if type(read_pyc('a.pyc'))==types.CodeType: print 'code'
+        code
+        >>> exec read_pyc('a.pyc') in environment
+        1
+    """
+
+    return
+
+
+if __name__ == '__main__':
+    import doctest
+    doctest.testmod()
+

ADDED   gluon/contenttype.py
Index: gluon/contenttype.py
==================================================================
--- /dev/null
+++ gluon/contenttype.py
@@ -0,0 +1,718 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro 
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+CONTENT_TYPE dictionary created against freedesktop.org' shared mime info
+database version 0.70.
+"""
+
+__all__ = ['contenttype']
+
+CONTENT_TYPE = {
+    '.load': 'text/html',
+    '.123': 'application/vnd.lotus-1-2-3',
+    '.3ds': 'image/x-3ds',
+    '.3g2': 'video/3gpp',
+    '.3ga': 'video/3gpp',
+    '.3gp': 'video/3gpp',
+    '.3gpp': 'video/3gpp',
+    '.602': 'application/x-t602',
+    '.669': 'audio/x-mod',
+    '.7z': 'application/x-7z-compressed',
+    '.a': 'application/x-archive',
+    '.aac': 'audio/mp4',
+    '.abw': 'application/x-abiword',
+    '.abw.crashed': 'application/x-abiword',
+    '.abw.gz': 'application/x-abiword',
+    '.ac3': 'audio/ac3',
+    '.ace': 'application/x-ace',
+    '.adb': 'text/x-adasrc',
+    '.ads': 'text/x-adasrc',
+    '.afm': 'application/x-font-afm',
+    '.ag': 'image/x-applix-graphics',
+    '.ai': 'application/illustrator',
+    '.aif': 'audio/x-aiff',
+    '.aifc': 'audio/x-aiff',
+    '.aiff': 'audio/x-aiff',
+    '.al': 'application/x-perl',
+    '.alz': 'application/x-alz',
+    '.amr': 'audio/amr',
+    '.ani': 'application/x-navi-animation',
+    '.anim[1-9j]': 'video/x-anim',
+    '.anx': 'application/annodex',
+    '.ape': 'audio/x-ape',
+    '.arj': 'application/x-arj',
+    '.arw': 'image/x-sony-arw',
+    '.as': 'application/x-applix-spreadsheet',
+    '.asc': 'text/plain',
+    '.asf': 'video/x-ms-asf',
+    '.asp': 'application/x-asp',
+    '.ass': 'text/x-ssa',
+    '.asx': 'audio/x-ms-asx',
+    '.atom': 'application/atom+xml',
+    '.au': 'audio/basic',
+    '.avi': 'video/x-msvideo',
+    '.aw': 'application/x-applix-word',
+    '.awb': 'audio/amr-wb',
+    '.awk': 'application/x-awk',
+    '.axa': 'audio/annodex',
+    '.axv': 'video/annodex',
+    '.bak': 'application/x-trash',
+    '.bcpio': 'application/x-bcpio',
+    '.bdf': 'application/x-font-bdf',
+    '.bib': 'text/x-bibtex',
+    '.bin': 'application/octet-stream',
+    '.blend': 'application/x-blender',
+    '.blender': 'application/x-blender',
+    '.bmp': 'image/bmp',
+    '.bz': 'application/x-bzip',
+    '.bz2': 'application/x-bzip',
+    '.c': 'text/x-csrc',
+    '.c++': 'text/x-c++src',
+    '.cab': 'application/vnd.ms-cab-compressed',
+    '.cb7': 'application/x-cb7',
+    '.cbr': 'application/x-cbr',
+    '.cbt': 'application/x-cbt',
+    '.cbz': 'application/x-cbz',
+    '.cc': 'text/x-c++src',
+    '.cdf': 'application/x-netcdf',
+    '.cdr': 'application/vnd.corel-draw',
+    '.cer': 'application/x-x509-ca-cert',
+    '.cert': 'application/x-x509-ca-cert',
+    '.cgm': 'image/cgm',
+    '.chm': 'application/x-chm',
+    '.chrt': 'application/x-kchart',
+    '.class': 'application/x-java',
+    '.cls': 'text/x-tex',
+    '.cmake': 'text/x-cmake',
+    '.cpio': 'application/x-cpio',
+    '.cpio.gz': 'application/x-cpio-compressed',
+    '.cpp': 'text/x-c++src',
+    '.cr2': 'image/x-canon-cr2',
+    '.crt': 'application/x-x509-ca-cert',
+    '.crw': 'image/x-canon-crw',
+    '.cs': 'text/x-csharp',
+    '.csh': 'application/x-csh',
+    '.css': 'text/css',
+    '.cssl': 'text/css',
+    '.csv': 'text/csv',
+    '.cue': 'application/x-cue',
+    '.cur': 'image/x-win-bitmap',
+    '.cxx': 'text/x-c++src',
+    '.d': 'text/x-dsrc',
+    '.dar': 'application/x-dar',
+    '.dbf': 'application/x-dbf',
+    '.dc': 'application/x-dc-rom',
+    '.dcl': 'text/x-dcl',
+    '.dcm': 'application/dicom',
+    '.dcr': 'image/x-kodak-dcr',
+    '.dds': 'image/x-dds',
+    '.deb': 'application/x-deb',
+    '.der': 'application/x-x509-ca-cert',
+    '.desktop': 'application/x-desktop',
+    '.dia': 'application/x-dia-diagram',
+    '.diff': 'text/x-patch',
+    '.divx': 'video/x-msvideo',
+    '.djv': 'image/vnd.djvu',
+    '.djvu': 'image/vnd.djvu',
+    '.dng': 'image/x-adobe-dng',
+    '.doc': 'application/msword',
+    '.docbook': 'application/docbook+xml',
+    '.docm': 'application/vnd.openxmlformats-officedocument.wordprocessingml.document',
+    '.docx': 'application/vnd.openxmlformats-officedocument.wordprocessingml.document',
+    '.dot': 'text/vnd.graphviz',
+    '.dsl': 'text/x-dsl',
+    '.dtd': 'application/xml-dtd',
+    '.dtx': 'text/x-tex',
+    '.dv': 'video/dv',
+    '.dvi': 'application/x-dvi',
+    '.dvi.bz2': 'application/x-bzdvi',
+    '.dvi.gz': 'application/x-gzdvi',
+    '.dwg': 'image/vnd.dwg',
+    '.dxf': 'image/vnd.dxf',
+    '.e': 'text/x-eiffel',
+    '.egon': 'application/x-egon',
+    '.eif': 'text/x-eiffel',
+    '.el': 'text/x-emacs-lisp',
+    '.emf': 'image/x-emf',
+    '.emp': 'application/vnd.emusic-emusic_package',
+    '.ent': 'application/xml-external-parsed-entity',
+    '.eps': 'image/x-eps',
+    '.eps.bz2': 'image/x-bzeps',
+    '.eps.gz': 'image/x-gzeps',
+    '.epsf': 'image/x-eps',
+    '.epsf.bz2': 'image/x-bzeps',
+    '.epsf.gz': 'image/x-gzeps',
+    '.epsi': 'image/x-eps',
+    '.epsi.bz2': 'image/x-bzeps',
+    '.epsi.gz': 'image/x-gzeps',
+    '.epub': 'application/epub+zip',
+    '.erl': 'text/x-erlang',
+    '.es': 'application/ecmascript',
+    '.etheme': 'application/x-e-theme',
+    '.etx': 'text/x-setext',
+    '.exe': 'application/x-ms-dos-executable',
+    '.exr': 'image/x-exr',
+    '.ez': 'application/andrew-inset',
+    '.f': 'text/x-fortran',
+    '.f90': 'text/x-fortran',
+    '.f95': 'text/x-fortran',
+    '.fb2': 'application/x-fictionbook+xml',
+    '.fig': 'image/x-xfig',
+    '.fits': 'image/fits',
+    '.fl': 'application/x-fluid',
+    '.flac': 'audio/x-flac',
+    '.flc': 'video/x-flic',
+    '.fli': 'video/x-flic',
+    '.flv': 'video/x-flv',
+    '.flw': 'application/x-kivio',
+    '.fo': 'text/x-xslfo',
+    '.for': 'text/x-fortran',
+    '.g3': 'image/fax-g3',
+    '.gb': 'application/x-gameboy-rom',
+    '.gba': 'application/x-gba-rom',
+    '.gcrd': 'text/directory',
+    '.ged': 'application/x-gedcom',
+    '.gedcom': 'application/x-gedcom',
+    '.gen': 'application/x-genesis-rom',
+    '.gf': 'application/x-tex-gf',
+    '.gg': 'application/x-sms-rom',
+    '.gif': 'image/gif',
+    '.glade': 'application/x-glade',
+    '.gmo': 'application/x-gettext-translation',
+    '.gnc': 'application/x-gnucash',
+    '.gnd': 'application/gnunet-directory',
+    '.gnucash': 'application/x-gnucash',
+    '.gnumeric': 'application/x-gnumeric',
+    '.gnuplot': 'application/x-gnuplot',
+    '.gp': 'application/x-gnuplot',
+    '.gpg': 'application/pgp-encrypted',
+    '.gplt': 'application/x-gnuplot',
+    '.gra': 'application/x-graphite',
+    '.gsf': 'application/x-font-type1',
+    '.gsm': 'audio/x-gsm',
+    '.gtar': 'application/x-tar',
+    '.gv': 'text/vnd.graphviz',
+    '.gvp': 'text/x-google-video-pointer',
+    '.gz': 'application/x-gzip',
+    '.h': 'text/x-chdr',
+    '.h++': 'text/x-c++hdr',
+    '.hdf': 'application/x-hdf',
+    '.hh': 'text/x-c++hdr',
+    '.hp': 'text/x-c++hdr',
+    '.hpgl': 'application/vnd.hp-hpgl',
+    '.hpp': 'text/x-c++hdr',
+    '.hs': 'text/x-haskell',
+    '.htm': 'text/html',
+    '.html': 'text/html',
+    '.hwp': 'application/x-hwp',
+    '.hwt': 'application/x-hwt',
+    '.hxx': 'text/x-c++hdr',
+    '.ica': 'application/x-ica',
+    '.icb': 'image/x-tga',
+    '.icns': 'image/x-icns',
+    '.ico': 'image/vnd.microsoft.icon',
+    '.ics': 'text/calendar',
+    '.idl': 'text/x-idl',
+    '.ief': 'image/ief',
+    '.iff': 'image/x-iff',
+    '.ilbm': 'image/x-ilbm',
+    '.ime': 'text/x-imelody',
+    '.imy': 'text/x-imelody',
+    '.ins': 'text/x-tex',
+    '.iptables': 'text/x-iptables',
+    '.iso': 'application/x-cd-image',
+    '.iso9660': 'application/x-cd-image',
+    '.it': 'audio/x-it',
+    '.j2k': 'image/jp2',
+    '.jad': 'text/vnd.sun.j2me.app-descriptor',
+    '.jar': 'application/x-java-archive',
+    '.java': 'text/x-java',
+    '.jng': 'image/x-jng',
+    '.jnlp': 'application/x-java-jnlp-file',
+    '.jp2': 'image/jp2',
+    '.jpc': 'image/jp2',
+    '.jpe': 'image/jpeg',
+    '.jpeg': 'image/jpeg',
+    '.jpf': 'image/jp2',
+    '.jpg': 'image/jpeg',
+    '.jpr': 'application/x-jbuilder-project',
+    '.jpx': 'image/jp2',
+    '.js': 'application/javascript',
+    '.json': 'application/json',
+    '.k25': 'image/x-kodak-k25',
+    '.kar': 'audio/midi',
+    '.karbon': 'application/x-karbon',
+    '.kdc': 'image/x-kodak-kdc',
+    '.kdelnk': 'application/x-desktop',
+    '.kexi': 'application/x-kexiproject-sqlite3',
+    '.kexic': 'application/x-kexi-connectiondata',
+    '.kexis': 'application/x-kexiproject-shortcut',
+    '.kfo': 'application/x-kformula',
+    '.kil': 'application/x-killustrator',
+    '.kino': 'application/smil',
+    '.kml': 'application/vnd.google-earth.kml+xml',
+    '.kmz': 'application/vnd.google-earth.kmz',
+    '.kon': 'application/x-kontour',
+    '.kpm': 'application/x-kpovmodeler',
+    '.kpr': 'application/x-kpresenter',
+    '.kpt': 'application/x-kpresenter',
+    '.kra': 'application/x-krita',
+    '.ksp': 'application/x-kspread',
+    '.kud': 'application/x-kugar',
+    '.kwd': 'application/x-kword',
+    '.kwt': 'application/x-kword',
+    '.la': 'application/x-shared-library-la',
+    '.latex': 'text/x-tex',
+    '.ldif': 'text/x-ldif',
+    '.lha': 'application/x-lha',
+    '.lhs': 'text/x-literate-haskell',
+    '.lhz': 'application/x-lhz',
+    '.log': 'text/x-log',
+    '.ltx': 'text/x-tex',
+    '.lua': 'text/x-lua',
+    '.lwo': 'image/x-lwo',
+    '.lwob': 'image/x-lwo',
+    '.lws': 'image/x-lws',
+    '.ly': 'text/x-lilypond',
+    '.lyx': 'application/x-lyx',
+    '.lz': 'application/x-lzip',
+    '.lzh': 'application/x-lha',
+    '.lzma': 'application/x-lzma',
+    '.lzo': 'application/x-lzop',
+    '.m': 'text/x-matlab',
+    '.m15': 'audio/x-mod',
+    '.m2t': 'video/mpeg',
+    '.m3u': 'audio/x-mpegurl',
+    '.m3u8': 'audio/x-mpegurl',
+    '.m4': 'application/x-m4',
+    '.m4a': 'audio/mp4',
+    '.m4b': 'audio/x-m4b',
+    '.m4v': 'video/mp4',
+    '.mab': 'application/x-markaby',
+    '.man': 'application/x-troff-man',
+    '.mbox': 'application/mbox',
+    '.md': 'application/x-genesis-rom',
+    '.mdb': 'application/vnd.ms-access',
+    '.mdi': 'image/vnd.ms-modi',
+    '.me': 'text/x-troff-me',
+    '.med': 'audio/x-mod',
+    '.metalink': 'application/metalink+xml',
+    '.mgp': 'application/x-magicpoint',
+    '.mid': 'audio/midi',
+    '.midi': 'audio/midi',
+    '.mif': 'application/x-mif',
+    '.minipsf': 'audio/x-minipsf',
+    '.mka': 'audio/x-matroska',
+    '.mkv': 'video/x-matroska',
+    '.ml': 'text/x-ocaml',
+    '.mli': 'text/x-ocaml',
+    '.mm': 'text/x-troff-mm',
+    '.mmf': 'application/x-smaf',
+    '.mml': 'text/mathml',
+    '.mng': 'video/x-mng',
+    '.mo': 'application/x-gettext-translation',
+    '.mo3': 'audio/x-mo3',
+    '.moc': 'text/x-moc',
+    '.mod': 'audio/x-mod',
+    '.mof': 'text/x-mof',
+    '.moov': 'video/quicktime',
+    '.mov': 'video/quicktime',
+    '.movie': 'video/x-sgi-movie',
+    '.mp+': 'audio/x-musepack',
+    '.mp2': 'video/mpeg',
+    '.mp3': 'audio/mpeg',
+    '.mp4': 'video/mp4',
+    '.mpc': 'audio/x-musepack',
+    '.mpe': 'video/mpeg',
+    '.mpeg': 'video/mpeg',
+    '.mpg': 'video/mpeg',
+    '.mpga': 'audio/mpeg',
+    '.mpp': 'audio/x-musepack',
+    '.mrl': 'text/x-mrml',
+    '.mrml': 'text/x-mrml',
+    '.mrw': 'image/x-minolta-mrw',
+    '.ms': 'text/x-troff-ms',
+    '.msi': 'application/x-msi',
+    '.msod': 'image/x-msod',
+    '.msx': 'application/x-msx-rom',
+    '.mtm': 'audio/x-mod',
+    '.mup': 'text/x-mup',
+    '.mxf': 'application/mxf',
+    '.n64': 'application/x-n64-rom',
+    '.nb': 'application/mathematica',
+    '.nc': 'application/x-netcdf',
+    '.nds': 'application/x-nintendo-ds-rom',
+    '.nef': 'image/x-nikon-nef',
+    '.nes': 'application/x-nes-rom',
+    '.nfo': 'text/x-nfo',
+    '.not': 'text/x-mup',
+    '.nsc': 'application/x-netshow-channel',
+    '.nsv': 'video/x-nsv',
+    '.o': 'application/x-object',
+    '.obj': 'application/x-tgif',
+    '.ocl': 'text/x-ocl',
+    '.oda': 'application/oda',
+    '.odb': 'application/vnd.oasis.opendocument.database',
+    '.odc': 'application/vnd.oasis.opendocument.chart',
+    '.odf': 'application/vnd.oasis.opendocument.formula',
+    '.odg': 'application/vnd.oasis.opendocument.graphics',
+    '.odi': 'application/vnd.oasis.opendocument.image',
+    '.odm': 'application/vnd.oasis.opendocument.text-master',
+    '.odp': 'application/vnd.oasis.opendocument.presentation',
+    '.ods': 'application/vnd.oasis.opendocument.spreadsheet',
+    '.odt': 'application/vnd.oasis.opendocument.text',
+    '.oga': 'audio/ogg',
+    '.ogg': 'video/x-theora+ogg',
+    '.ogm': 'video/x-ogm+ogg',
+    '.ogv': 'video/ogg',
+    '.ogx': 'application/ogg',
+    '.old': 'application/x-trash',
+    '.oleo': 'application/x-oleo',
+    '.opml': 'text/x-opml+xml',
+    '.ora': 'image/openraster',
+    '.orf': 'image/x-olympus-orf',
+    '.otc': 'application/vnd.oasis.opendocument.chart-template',
+    '.otf': 'application/x-font-otf',
+    '.otg': 'application/vnd.oasis.opendocument.graphics-template',
+    '.oth': 'application/vnd.oasis.opendocument.text-web',
+    '.otp': 'application/vnd.oasis.opendocument.presentation-template',
+    '.ots': 'application/vnd.oasis.opendocument.spreadsheet-template',
+    '.ott': 'application/vnd.oasis.opendocument.text-template',
+    '.owl': 'application/rdf+xml',
+    '.oxt': 'application/vnd.openofficeorg.extension',
+    '.p': 'text/x-pascal',
+    '.p10': 'application/pkcs10',
+    '.p12': 'application/x-pkcs12',
+    '.p7b': 'application/x-pkcs7-certificates',
+    '.p7s': 'application/pkcs7-signature',
+    '.pack': 'application/x-java-pack200',
+    '.pak': 'application/x-pak',
+    '.par2': 'application/x-par2',
+    '.pas': 'text/x-pascal',
+    '.patch': 'text/x-patch',
+    '.pbm': 'image/x-portable-bitmap',
+    '.pcd': 'image/x-photo-cd',
+    '.pcf': 'application/x-cisco-vpn-settings',
+    '.pcf.gz': 'application/x-font-pcf',
+    '.pcf.z': 'application/x-font-pcf',
+    '.pcl': 'application/vnd.hp-pcl',
+    '.pcx': 'image/x-pcx',
+    '.pdb': 'chemical/x-pdb',
+    '.pdc': 'application/x-aportisdoc',
+    '.pdf': 'application/pdf',
+    '.pdf.bz2': 'application/x-bzpdf',
+    '.pdf.gz': 'application/x-gzpdf',
+    '.pef': 'image/x-pentax-pef',
+    '.pem': 'application/x-x509-ca-cert',
+    '.perl': 'application/x-perl',
+    '.pfa': 'application/x-font-type1',
+    '.pfb': 'application/x-font-type1',
+    '.pfx': 'application/x-pkcs12',
+    '.pgm': 'image/x-portable-graymap',
+    '.pgn': 'application/x-chess-pgn',
+    '.pgp': 'application/pgp-encrypted',
+    '.php': 'application/x-php',
+    '.php3': 'application/x-php',
+    '.php4': 'application/x-php',
+    '.pict': 'image/x-pict',
+    '.pict1': 'image/x-pict',
+    '.pict2': 'image/x-pict',
+    '.pickle': 'application/python-pickle',
+    '.pk': 'application/x-tex-pk',
+    '.pkipath': 'application/pkix-pkipath',
+    '.pkr': 'application/pgp-keys',
+    '.pl': 'application/x-perl',
+    '.pla': 'audio/x-iriver-pla',
+    '.pln': 'application/x-planperfect',
+    '.pls': 'audio/x-scpls',
+    '.pm': 'application/x-perl',
+    '.png': 'image/png',
+    '.pnm': 'image/x-portable-anymap',
+    '.pntg': 'image/x-macpaint',
+    '.po': 'text/x-gettext-translation',
+    '.por': 'application/x-spss-por',
+    '.pot': 'text/x-gettext-translation-template',
+    '.ppm': 'image/x-portable-pixmap',
+    '.pps': 'application/vnd.ms-powerpoint',
+    '.ppt': 'application/vnd.ms-powerpoint',
+    '.pptm': 'application/vnd.openxmlformats-officedocument.presentationml.presentation',
+    '.pptx': 'application/vnd.openxmlformats-officedocument.presentationml.presentation',
+    '.ppz': 'application/vnd.ms-powerpoint',
+    '.prc': 'application/x-palm-database',
+    '.ps': 'application/postscript',
+    '.ps.bz2': 'application/x-bzpostscript',
+    '.ps.gz': 'application/x-gzpostscript',
+    '.psd': 'image/vnd.adobe.photoshop',
+    '.psf': 'audio/x-psf',
+    '.psf.gz': 'application/x-gz-font-linux-psf',
+    '.psflib': 'audio/x-psflib',
+    '.psid': 'audio/prs.sid',
+    '.psw': 'application/x-pocket-word',
+    '.pw': 'application/x-pw',
+    '.py': 'text/x-python',
+    '.pyc': 'application/x-python-bytecode',
+    '.pyo': 'application/x-python-bytecode',
+    '.qif': 'image/x-quicktime',
+    '.qt': 'video/quicktime',
+    '.qtif': 'image/x-quicktime',
+    '.qtl': 'application/x-quicktime-media-link',
+    '.qtvr': 'video/quicktime',
+    '.ra': 'audio/vnd.rn-realaudio',
+    '.raf': 'image/x-fuji-raf',
+    '.ram': 'application/ram',
+    '.rar': 'application/x-rar',
+    '.ras': 'image/x-cmu-raster',
+    '.raw': 'image/x-panasonic-raw',
+    '.rax': 'audio/vnd.rn-realaudio',
+    '.rb': 'application/x-ruby',
+    '.rdf': 'application/rdf+xml',
+    '.rdfs': 'application/rdf+xml',
+    '.reg': 'text/x-ms-regedit',
+    '.rej': 'application/x-reject',
+    '.rgb': 'image/x-rgb',
+    '.rle': 'image/rle',
+    '.rm': 'application/vnd.rn-realmedia',
+    '.rmj': 'application/vnd.rn-realmedia',
+    '.rmm': 'application/vnd.rn-realmedia',
+    '.rms': 'application/vnd.rn-realmedia',
+    '.rmvb': 'application/vnd.rn-realmedia',
+    '.rmx': 'application/vnd.rn-realmedia',
+    '.roff': 'text/troff',
+    '.rp': 'image/vnd.rn-realpix',
+    '.rpm': 'application/x-rpm',
+    '.rss': 'application/rss+xml',
+    '.rt': 'text/vnd.rn-realtext',
+    '.rtf': 'application/rtf',
+    '.rtx': 'text/richtext',
+    '.rv': 'video/vnd.rn-realvideo',
+    '.rvx': 'video/vnd.rn-realvideo',
+    '.s3m': 'audio/x-s3m',
+    '.sam': 'application/x-amipro',
+    '.sami': 'application/x-sami',
+    '.sav': 'application/x-spss-sav',
+    '.scm': 'text/x-scheme',
+    '.sda': 'application/vnd.stardivision.draw',
+    '.sdc': 'application/vnd.stardivision.calc',
+    '.sdd': 'application/vnd.stardivision.impress',
+    '.sdp': 'application/sdp',
+    '.sds': 'application/vnd.stardivision.chart',
+    '.sdw': 'application/vnd.stardivision.writer',
+    '.sgf': 'application/x-go-sgf',
+    '.sgi': 'image/x-sgi',
+    '.sgl': 'application/vnd.stardivision.writer',
+    '.sgm': 'text/sgml',
+    '.sgml': 'text/sgml',
+    '.sh': 'application/x-shellscript',
+    '.shar': 'application/x-shar',
+    '.shn': 'application/x-shorten',
+    '.siag': 'application/x-siag',
+    '.sid': 'audio/prs.sid',
+    '.sik': 'application/x-trash',
+    '.sis': 'application/vnd.symbian.install',
+    '.sisx': 'x-epoc/x-sisx-app',
+    '.sit': 'application/x-stuffit',
+    '.siv': 'application/sieve',
+    '.sk': 'image/x-skencil',
+    '.sk1': 'image/x-skencil',
+    '.skr': 'application/pgp-keys',
+    '.slk': 'text/spreadsheet',
+    '.smaf': 'application/x-smaf',
+    '.smc': 'application/x-snes-rom',
+    '.smd': 'application/vnd.stardivision.mail',
+    '.smf': 'application/vnd.stardivision.math',
+    '.smi': 'application/x-sami',
+    '.smil': 'application/smil',
+    '.sml': 'application/smil',
+    '.sms': 'application/x-sms-rom',
+    '.snd': 'audio/basic',
+    '.so': 'application/x-sharedlib',
+    '.spc': 'application/x-pkcs7-certificates',
+    '.spd': 'application/x-font-speedo',
+    '.spec': 'text/x-rpm-spec',
+    '.spl': 'application/x-shockwave-flash',
+    '.spx': 'audio/x-speex',
+    '.sql': 'text/x-sql',
+    '.sr2': 'image/x-sony-sr2',
+    '.src': 'application/x-wais-source',
+    '.srf': 'image/x-sony-srf',
+    '.srt': 'application/x-subrip',
+    '.ssa': 'text/x-ssa',
+    '.stc': 'application/vnd.sun.xml.calc.template',
+    '.std': 'application/vnd.sun.xml.draw.template',
+    '.sti': 'application/vnd.sun.xml.impress.template',
+    '.stm': 'audio/x-stm',
+    '.stw': 'application/vnd.sun.xml.writer.template',
+    '.sty': 'text/x-tex',
+    '.sub': 'text/x-subviewer',
+    '.sun': 'image/x-sun-raster',
+    '.sv4cpio': 'application/x-sv4cpio',
+    '.sv4crc': 'application/x-sv4crc',
+    '.svg': 'image/svg+xml',
+    '.svgz': 'image/svg+xml-compressed',
+    '.swf': 'application/x-shockwave-flash',
+    '.sxc': 'application/vnd.sun.xml.calc',
+    '.sxd': 'application/vnd.sun.xml.draw',
+    '.sxg': 'application/vnd.sun.xml.writer.global',
+    '.sxi': 'application/vnd.sun.xml.impress',
+    '.sxm': 'application/vnd.sun.xml.math',
+    '.sxw': 'application/vnd.sun.xml.writer',
+    '.sylk': 'text/spreadsheet',
+    '.t': 'text/troff',
+    '.t2t': 'text/x-txt2tags',
+    '.tar': 'application/x-tar',
+    '.tar.bz': 'application/x-bzip-compressed-tar',
+    '.tar.bz2': 'application/x-bzip-compressed-tar',
+    '.tar.gz': 'application/x-compressed-tar',
+    '.tar.lzma': 'application/x-lzma-compressed-tar',
+    '.tar.lzo': 'application/x-tzo',
+    '.tar.xz': 'application/x-xz-compressed-tar',
+    '.tar.z': 'application/x-tarz',
+    '.tbz': 'application/x-bzip-compressed-tar',
+    '.tbz2': 'application/x-bzip-compressed-tar',
+    '.tcl': 'text/x-tcl',
+    '.tex': 'text/x-tex',
+    '.texi': 'text/x-texinfo',
+    '.texinfo': 'text/x-texinfo',
+    '.tga': 'image/x-tga',
+    '.tgz': 'application/x-compressed-tar',
+    '.theme': 'application/x-theme',
+    '.themepack': 'application/x-windows-themepack',
+    '.tif': 'image/tiff',
+    '.tiff': 'image/tiff',
+    '.tk': 'text/x-tcl',
+    '.tlz': 'application/x-lzma-compressed-tar',
+    '.tnef': 'application/vnd.ms-tnef',
+    '.tnf': 'application/vnd.ms-tnef',
+    '.toc': 'application/x-cdrdao-toc',
+    '.torrent': 'application/x-bittorrent',
+    '.tpic': 'image/x-tga',
+    '.tr': 'text/troff',
+    '.ts': 'application/x-linguist',
+    '.tsv': 'text/tab-separated-values',
+    '.tta': 'audio/x-tta',
+    '.ttc': 'application/x-font-ttf',
+    '.ttf': 'application/x-font-ttf',
+    '.ttx': 'application/x-font-ttx',
+    '.txt': 'text/plain',
+    '.txz': 'application/x-xz-compressed-tar',
+    '.tzo': 'application/x-tzo',
+    '.ufraw': 'application/x-ufraw',
+    '.ui': 'application/x-designer',
+    '.uil': 'text/x-uil',
+    '.ult': 'audio/x-mod',
+    '.uni': 'audio/x-mod',
+    '.uri': 'text/x-uri',
+    '.url': 'text/x-uri',
+    '.ustar': 'application/x-ustar',
+    '.vala': 'text/x-vala',
+    '.vapi': 'text/x-vala',
+    '.vcf': 'text/directory',
+    '.vcs': 'text/calendar',
+    '.vct': 'text/directory',
+    '.vda': 'image/x-tga',
+    '.vhd': 'text/x-vhdl',
+    '.vhdl': 'text/x-vhdl',
+    '.viv': 'video/vivo',
+    '.vivo': 'video/vivo',
+    '.vlc': 'audio/x-mpegurl',
+    '.vob': 'video/mpeg',
+    '.voc': 'audio/x-voc',
+    '.vor': 'application/vnd.stardivision.writer',
+    '.vst': 'image/x-tga',
+    '.wav': 'audio/x-wav',
+    '.wax': 'audio/x-ms-asx',
+    '.wb1': 'application/x-quattropro',
+    '.wb2': 'application/x-quattropro',
+    '.wb3': 'application/x-quattropro',
+    '.wbmp': 'image/vnd.wap.wbmp',
+    '.wcm': 'application/vnd.ms-works',
+    '.wdb': 'application/vnd.ms-works',
+    '.wk1': 'application/vnd.lotus-1-2-3',
+    '.wk3': 'application/vnd.lotus-1-2-3',
+    '.wk4': 'application/vnd.lotus-1-2-3',
+    '.wks': 'application/vnd.ms-works',
+    '.wma': 'audio/x-ms-wma',
+    '.wmf': 'image/x-wmf',
+    '.wml': 'text/vnd.wap.wml',
+    '.wmls': 'text/vnd.wap.wmlscript',
+    '.wmv': 'video/x-ms-wmv',
+    '.wmx': 'audio/x-ms-asx',
+    '.wp': 'application/vnd.wordperfect',
+    '.wp4': 'application/vnd.wordperfect',
+    '.wp5': 'application/vnd.wordperfect',
+    '.wp6': 'application/vnd.wordperfect',
+    '.wpd': 'application/vnd.wordperfect',
+    '.wpg': 'application/x-wpg',
+    '.wpl': 'application/vnd.ms-wpl',
+    '.wpp': 'application/vnd.wordperfect',
+    '.wps': 'application/vnd.ms-works',
+    '.wri': 'application/x-mswrite',
+    '.wrl': 'model/vrml',
+    '.wv': 'audio/x-wavpack',
+    '.wvc': 'audio/x-wavpack-correction',
+    '.wvp': 'audio/x-wavpack',
+    '.wvx': 'audio/x-ms-asx',
+    '.x3f': 'image/x-sigma-x3f',
+    '.xac': 'application/x-gnucash',
+    '.xbel': 'application/x-xbel',
+    '.xbl': 'application/xml',
+    '.xbm': 'image/x-xbitmap',
+    '.xcf': 'image/x-xcf',
+    '.xcf.bz2': 'image/x-compressed-xcf',
+    '.xcf.gz': 'image/x-compressed-xcf',
+    '.xhtml': 'application/xhtml+xml',
+    '.xi': 'audio/x-xi',
+    '.xla': 'application/vnd.ms-excel',
+    '.xlc': 'application/vnd.ms-excel',
+    '.xld': 'application/vnd.ms-excel',
+    '.xlf': 'application/x-xliff',
+    '.xliff': 'application/x-xliff',
+    '.xll': 'application/vnd.ms-excel',
+    '.xlm': 'application/vnd.ms-excel',
+    '.xls': 'application/vnd.ms-excel',
+    '.xlsm': 'application/vnd.openxmlformats-officedocument.spreadsheetml.sheet',
+    '.xlsx': 'application/vnd.openxmlformats-officedocument.spreadsheetml.sheet',
+    '.xlt': 'application/vnd.ms-excel',
+    '.xlw': 'application/vnd.ms-excel',
+    '.xm': 'audio/x-xm',
+    '.xmf': 'audio/x-xmf',
+    '.xmi': 'text/x-xmi',
+    '.xml': 'application/xml',
+    '.xpm': 'image/x-xpixmap',
+    '.xps': 'application/vnd.ms-xpsdocument',
+    '.xsl': 'application/xml',
+    '.xslfo': 'text/x-xslfo',
+    '.xslt': 'application/xml',
+    '.xspf': 'application/xspf+xml',
+    '.xul': 'application/vnd.mozilla.xul+xml',
+    '.xwd': 'image/x-xwindowdump',
+    '.xyz': 'chemical/x-pdb',
+    '.xz': 'application/x-xz',
+    '.w2p': 'application/w2p',
+    '.z': 'application/x-compress',
+    '.zabw': 'application/x-abiword',
+    '.zip': 'application/zip',
+    '.zoo': 'application/x-zoo',
+    }
+
+
+def contenttype(filename, default='text/plain'):
+    """
+    Returns the Content-Type string matching extension of the given filename.
+    """
+
+    i = filename.rfind('.')
+    if i>=0:
+        default = CONTENT_TYPE.get(filename[i:].lower(),default)
+        j = filename.rfind('.', 0, i)
+        if j>=0:
+            default = CONTENT_TYPE.get(filename[j:].lower(),default)
+    if default.startswith('text/'):
+        default += '; charset=utf-8'
+    return default
+

ADDED   gluon/contrib/AuthorizeNet.py
Index: gluon/contrib/AuthorizeNet.py
==================================================================
--- /dev/null
+++ gluon/contrib/AuthorizeNet.py
@@ -0,0 +1,260 @@
+"""
+AIM class to credit card payment with authorize.net
+
+Fork of authnet code written by John Conde
+http://www.johnconde.net/blog/integrate-the-authorizenet-aim-api-with-python-3-2/
+Unkown license, assuming public domain
+
+Modifed by Massimo Di Pierro
+
+- ported from Python 3.x run on Python 2.4+
+- fixed a couple of bugs
+- merged with test so single file
+- namedtuple from http://code.activestate.com/recipes/500261/
+
+"""
+
+__all__ = ['AIM']
+
+from operator import itemgetter
+import urllib
+
+_known_tuple_types = {}
+
+class NamedTupleBase(tuple):
+    """Base class for named tuples with the __new__ operator set, named tuples
+       yielded by the namedtuple() function will subclass this and add
+       properties."""
+    def __new__(cls, *args, **kws):
+        """Create a new instance of this fielded tuple"""
+        # May need to unpack named field values here
+        if kws:
+            values = list(args) + [None]*(len(cls._fields) - len(args))
+            fields = dict((val, idx) for idx, val in enumerate(cls._fields))
+            for kw, val in kws.iteritems():
+                assert kw in kws, "%r not in field list" % kw
+                values[fields[kw]] = val
+            args = tuple(values)
+        return tuple.__new__(cls, args)
+
+def namedtuple(typename, fieldnames):
+    """
+    >>> import namedtuples
+    >>> tpl = namedtuples.namedtuple(['a', 'b', 'c'])
+    >>> tpl(1, 2, 3)
+    (1, 2, 3)
+    >>> tpl(1, 2, 3).b
+    2
+    >>> tpl(c=1, a=2, b=3)
+    (2, 3, 1)
+    >>> tpl(c=1, a=2, b=3).b
+    3
+    >>> tpl(c='pads with nones')
+    (None, None, 'pads with nones')
+    >>> tpl(b='pads with nones')
+    (None, 'pads with nones', None)
+    >>>
+    """
+    # Split up a string, some people do this
+    if isinstance(fieldnames, basestring):
+        fieldnames = fieldnames.replace(',', ' ').split()
+    # Convert anything iterable that enumerates fields to a tuple now
+    fieldname_tuple = tuple(str(field) for field in fieldnames)
+    # See if we've cached this
+    if fieldname_tuple in _known_tuple_types:
+        return _known_tuple_types[fieldname_tuple]
+    # Make the type
+    new_tuple_type = type(typename, (NamedTupleBase,), {})
+    # Set the hidden field
+    new_tuple_type._fields = fieldname_tuple
+    # Add the getters
+    for i, field in enumerate(fieldname_tuple):
+        setattr(new_tuple_type, field, property(itemgetter(i)))
+    # Cache
+    _known_tuple_types[fieldname_tuple] = new_tuple_type
+    # Done
+    return new_tuple_type
+
+class AIM:
+
+    class AIMError(Exception):
+        def __init__(self, value):
+            self.parameter = value
+        def __str__(self):
+            return str(self.parameter)
+
+    def __init__(self, login, transkey, testmode=False):
+        if str(login).strip() == '' or login == None:
+            raise AIM.AIMError('No login name provided')
+        if str(transkey).strip() == '' or transkey == None:
+            raise AIM.AIMError('No transaction key provided')
+        if testmode != True and testmode != False:
+            raise AIM.AIMError('Invalid value for testmode. Must be True or False. "{0}" given.'.format(testmode))
+
+        self.testmode = testmode
+        self.proxy = None;
+        self.delimiter = '|'
+        self.results = []
+        self.error = True
+        self.success = False
+        self.declined = False
+
+        self.parameters = {}
+        self.setParameter('x_delim_data', 'true')
+        self.setParameter('x_delim_char', self.delimiter)
+        self.setParameter('x_relay_response', 'FALSE')
+        self.setParameter('x_url', 'FALSE')
+        self.setParameter('x_version', '3.1')
+        self.setParameter('x_method', 'CC')
+        self.setParameter('x_type', 'AUTH_CAPTURE')
+        self.setParameter('x_login', login)
+        self.setParameter('x_tran_key', transkey)
+
+    def process(self):
+        encoded_args = urllib.urlencode(self.parameters)
+        if self.testmode == True:
+            url = 'https://test.authorize.net/gateway/transact.dll'
+        else:
+            url = 'https://secure.authorize.net/gateway/transact.dll'
+
+        if self.proxy == None:
+            self.results += str(urllib.urlopen(url, encoded_args).read()).split(self.delimiter)
+        else:
+            opener = urllib.FancyURLopener(self.proxy)
+            opened = opener.open(url, encoded_args)
+            try:
+                self.results += str(opened.read()).split(self.delimiter)
+            finally:
+                opened.close()
+        Results = namedtuple('Results', 'ResultResponse ResponseSubcode ResponseCode ResponseText AuthCode \
+                                          AVSResponse TransactionID InvoiceNumber Description Amount PaymentMethod \
+                                          TransactionType CustomerID CHFirstName CHLastName Company BillingAddress \
+                                          BillingCity BillingState BillingZip BillingCountry Phone Fax Email ShippingFirstName \
+                                          ShippingLastName ShippingCompany ShippingAddress ShippingCity ShippingState \
+                                          ShippingZip ShippingCountry TaxAmount DutyAmount FreightAmount TaxExemptFlag \
+                                          PONumber MD5Hash CVVResponse CAVVResponse')
+        self.response = Results(*tuple(r for r in self.results)[0:40])
+
+        if self.getResultResponseFull() == 'Approved':
+            self.error = False
+            self.success = True
+            self.declined = False
+        elif self.getResultResponseFull() == 'Declined':
+            self.error = False
+            self.success = False
+            self.declined = True
+        else:
+            raise AIM.AIMError(self.response.ResponseText)
+
+    def setTransaction(self, creditcard, expiration, total, cvv=None, tax=None, invoice=None):
+        if str(creditcard).strip() == '' or creditcard == None:
+            raise AIM.AIMError('No credit card number passed to setTransaction(): {0}'.format(creditcard))
+        if str(expiration).strip() == '' or expiration == None:
+            raise AIM.AIMError('No expiration number to setTransaction(): {0}'.format(expiration))
+        if str(total).strip() == '' or total == None:
+            raise AIM.AIMError('No total amount passed to setTransaction(): {0}'.format(total))
+
+        self.setParameter('x_card_num', creditcard)
+        self.setParameter('x_exp_date', expiration)
+        self.setParameter('x_amount', total)
+        if cvv != None:
+            self.setParameter('x_card_code', cvv)
+        if tax != None:
+            self.setParameter('x_tax', tax)
+        if invoice != None:
+            self.setParameter('x_invoice_num', invoice)
+
+    def setTransactionType(self, transtype=None):
+        types = ['AUTH_CAPTURE', 'AUTH_ONLY', 'PRIOR_AUTH_CAPTURE', 'CREDIT', 'CAPTURE_ONLY', 'VOID']
+        if transtype.upper() not in types:
+            raise AIM.AIMError('Incorrect Transaction Type passed to setTransactionType(): {0}'.format(transtype))
+        self.setParameter('x_type', transtype.upper())
+
+    def setProxy(self, proxy=None):
+        if str(proxy).strip() == '' or proxy == None:
+            raise AIM.AIMError('No proxy passed to setProxy()')
+        self.proxy = {'http': str(proxy).strip()}
+
+    def setParameter(self, key=None, value=None):
+        if key != None and value != None and str(key).strip() != '' and str(value).strip() != '':
+            self.parameters[key] = str(value).strip()
+        else:
+            raise AIM.AIMError('Incorrect parameters passed to setParameter(): {0}:{1}'.format(key, value))
+
+    def isApproved(self):
+        return self.success
+
+    def isDeclined(self):
+        return self.declined
+
+    def isError(self):
+        return self.error
+
+    def getResultResponseFull(self):
+        responses = ['', 'Approved', 'Declined', 'Error']
+        return responses[int(self.results[0])]
+
+def process(creditcard,expiration,total,cvv=None,tax=None,invoice=None,
+            login='cnpdev4289', transkey='SR2P8g4jdEn7vFLQ',testmode=True):
+    payment = AIM(login,transkey,testmode)
+    expiration = expiration.replace('/','')
+    payment.setTransaction(creditcard, expiration, total, cvv, tax, invoice)
+    try:
+        payment.process()
+        return payment.isApproved()
+    except AIM.AIMError:
+        return False
+
+def test():
+    import socket
+    import sys
+    from time import time
+
+    creditcard = '4427802641004797'
+    expiration = '122012'
+    total = '1.00'
+    cvv = '123'
+    tax = '0.00'
+    invoice = str(time())[4:10] # get a random invoice number
+
+    try:
+        payment = AIM('cnpdev4289', 'SR2P8g4jdEn7vFLQ', True)
+        payment.setTransaction(creditcard, expiration, total, cvv, tax, invoice)
+        payment.setParameter('x_duplicate_window', 180) # three minutes duplicate windows
+        payment.setParameter('x_cust_id', '1324')       # customer ID
+        payment.setParameter('x_first_name', 'John')
+        payment.setParameter('x_last_name', 'Conde')
+        payment.setParameter('x_company', 'Test Company')
+        payment.setParameter('x_address', '1234 Main Street')
+        payment.setParameter('x_city', 'Townsville')
+        payment.setParameter('x_state', 'NJ')
+        payment.setParameter('x_zip', '12345')
+        payment.setParameter('x_country', 'US')
+        payment.setParameter('x_phone', '800-555-1234')
+        payment.setParameter('x_description', 'Test Transaction')
+        payment.setParameter('x_customer_ip', socket.gethostbyname(socket.gethostname()))
+        payment.setParameter('x_email', 'john@example.com')
+        payment.setParameter('x_email_customer', False)
+        payment.process()
+        if payment.isApproved():
+            print 'Response Code: ', payment.response.ResponseCode
+            print 'Response Text: ', payment.response.ResponseText
+            print 'Response: ', payment.getResultResponseFull()
+            print 'Transaction ID: ', payment.response.TransactionID
+            print 'CVV Result: ', payment.response.CVVResponse
+            print 'Approval Code: ', payment.response.AuthCode
+            print 'AVS Result: ', payment.response.AVSResponse
+        elif payment.isDeclined():
+            print 'Your credit card was declined by your bank'
+        elif payment.isError():
+            raise AIM.AIMError('An uncaught error occurred')
+    except AIM.AIMError, e:
+        print "Exception thrown:", e
+        print 'An error occured'
+    print 'approved',payment.isApproved()
+    print 'declined',payment.isDeclined()
+    print 'error',payment.isError()
+
+if __name__=='__main__':
+    test()
+

ADDED   gluon/contrib/__init__.py
Index: gluon/contrib/__init__.py
==================================================================
--- /dev/null
+++ gluon/contrib/__init__.py
@@ -0,0 +1,2 @@
+
+

ADDED   gluon/contrib/comet_messaging.py
Index: gluon/contrib/comet_messaging.py
==================================================================
--- /dev/null
+++ gluon/contrib/comet_messaging.py
@@ -0,0 +1,191 @@
+#!/usr/bin/python
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro 
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+Attention: Requires Chrome or Safari. For IE of Firefox you need https://github.com/gimite/web-socket-js
+
+1) install tornado
+
+   easy_install tornado
+
+2) start this app:
+
+   python gluon/contrib/comet_messaging.py -k mykey -p 8888
+
+3) from any web2py app you can post messages with
+
+   from gluon.contrib.comet_messaging import comet_send
+   comet_send('http://127.0.0.1:8888','Hello World','mykey','mygroup')
+
+4) from any template you can receive them with
+
+   
+
+When the server posts a message, all clients connected to the page will popup an alert message
+Or if you want to send json messages and store evaluated json in a var called data:
+
+   
+
+- All communications between web2py and comet_messaging will be digitally signed with hmac.
+- All validation is handled on the web2py side and there is no need to modify comet_messaging.py
+- Multiple web2py instances can talk with one or more comet_messaging servers.
+- "ws://127.0.0.1:8888/realtime/" must be contain the IP of the comet_messaging server.
+- Via group='mygroup' name you can support multiple groups of clients (think of many chat-rooms)
+
+Here is a complete sample web2py action:
+
+    def index():
+        form=LOAD('default','ajax_form',ajax=True)
+        script=SCRIPT('''
+            jQuery(document).ready(function(){
+              var callback=function(e){alert(e.data)};
+              if(!web2py_comet('ws://127.0.0.1:8888/realtime/mygroup',callback))
+                alert("html5 websocket not supported by your browser, try Google Chrome");
+            });
+        ''')
+        return dict(form=form, script=script)
+
+    def ajax_form():
+        form=SQLFORM.factory(Field('message'))
+        if form.accepts(request,session):
+            from gluon.contrib.comet_messaging import comet_send
+            comet_send('http://127.0.0.1:8888',form.vars.message,'mykey','mygroup')
+        return form
+
+Acknowledgements:
+Tornado code inspired by http://thomas.pelletier.im/2010/08/websocket-tornado-redis/
+
+"""
+
+import tornado.httpserver
+import tornado.websocket
+import tornado.ioloop
+import tornado.web
+import hmac
+import sys
+import optparse
+import urllib
+import time
+
+listeners = {}
+names = {}
+tokens = {}
+
+def comet_send(url,message,hmac_key=None,group='default'):
+    sig = hmac_key and hmac.new(hmac_key,message).hexdigest() or ''
+    params = urllib.urlencode({'message': message, 'signature': sig, 'group':group})
+    f = urllib.urlopen(url, params)
+    data= f.read()
+    f.close()
+    return data
+
+class PostHandler(tornado.web.RequestHandler):
+    """
+    only authorized parties can post messages
+    """
+    def post(self):
+        if hmac_key and not 'signature' in self.request.arguments: return 'false'
+        if 'message' in self.request.arguments:
+            message = self.request.arguments['message'][0]
+            group = self.request.arguments.get('group',['default'])[0]
+            print '%s:MESSAGE to %s:%s' % (time.time(), group, message)
+            if hmac_key:
+                signature = self.request.arguments['signature'][0]
+                if not hmac.new(hmac_key,message).hexdigest()==signature: return 'false'
+            for client in listeners.get(group,[]): client.write_message(message)
+            return 'true'
+        return 'false'
+
+class TokenHandler(tornado.web.RequestHandler):
+    """
+    if running with -t post a token to allow a client to join using the token
+    the message here is the token (any uuid)
+    allows only authorized parties to joins, for example, a chat
+    """
+    def post(self):
+        if hmac_key and not 'message' in self.request.arguments: return 'false'
+        if 'message' in self.request.arguments:
+            message = self.request.arguments['message'][0]
+            if hmac_key:
+                signature = self.request.arguments['signature'][0]
+                if not hmac.new(hmac_key,message).hexdigest()==signature: return 'false'
+            tokens[message] = None
+            return 'true'
+        return 'false'
+
+class DistributeHandler(tornado.websocket.WebSocketHandler):
+    def open(self,params):
+        group,token,name = params.split('/')+[None,None]
+        self.group = group or 'default'
+        self.token = token or 'none'
+        self.name = name or 'anonymous'
+        # only authorized parties can join
+        if DistributeHandler.tokens:
+            if not self.token in tokens or not token[self.token]==None:
+                self.close()
+            else:
+                tokens[self.token] = self
+        if not self.group in listeners: listeners[self.group]=[]
+        # notify clients that a member has joined the groups
+        for client in listeners.get(self.group,[]): client.write_message('+'+self.name)
+        listeners[self.group].append(self)
+        names[self] = self.name
+        print '%s:CONNECT to %s' % (time.time(), self.group)
+    def on_message(self, message):
+        pass
+    def on_close(self):
+        if self.group in listeners: listeners[self.group].remove(self)
+        del names[self]
+        # notify clients that a member has left the groups
+        for client in listeners.get(self.group,[]): client.write_message('-'+self.name)
+        print '%s:DISCONNECT from %s' % (time.time(), self.group)
+
+if __name__ == "__main__":
+    usage = __doc__
+    version= ""
+    parser = optparse.OptionParser(usage, None, optparse.Option, version)
+    parser.add_option('-p',
+                      '--port',
+                      default='8888',
+                      dest='port',
+                      help='socket')
+    parser.add_option('-l',
+                      '--listen',
+                      default='0.0.0.0',
+                      dest='address',
+                      help='listener address')
+    parser.add_option('-k',
+                      '--hmac_key',
+                      default='',
+                      dest='hmac_key',
+                      help='hmac_key')
+    parser.add_option('-t',
+                      '--tokens',
+                      action='store_true',
+                      default=False,
+                      dest='tokens',
+                      help='require tockens to join')
+    (options, args) = parser.parse_args()
+    hmac_key = options.hmac_key
+    DistributeHandler.tokens = options.tokens
+    urls=[
+        (r'/', PostHandler),
+        (r'/token', TokenHandler),
+        (r'/realtime/(.*)', DistributeHandler)]
+    application = tornado.web.Application(urls, auto_reload=True)
+    http_server = tornado.httpserver.HTTPServer(application)
+    http_server.listen(int(options.port), address=options.address)
+    tornado.ioloop.IOLoop.instance().start()
+

ADDED   gluon/contrib/feedparser.py
Index: gluon/contrib/feedparser.py
==================================================================
--- /dev/null
+++ gluon/contrib/feedparser.py
@@ -0,0 +1,4010 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""Universal feed parser
+
+Handles RSS 0.9x, RSS 1.0, RSS 2.0, CDF, Atom 0.3, and Atom 1.0 feeds
+
+Visit http://feedparser.org/ for the latest version
+Visit http://feedparser.org/docs/ for the latest documentation
+
+Required: Python 2.1 or later
+Recommended: Python 2.3 or later
+Recommended: CJKCodecs and iconv_codec 
+"""  # + "$Revision: 1.92 $"[11:15] + "-cvs"
+
+__version__ = '4.1'
+__license__ = \
+    """Copyright (c) 2002-2006, Mark Pilgrim, All rights reserved.
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice,
+  this list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice,
+  this list of conditions and the following disclaimer in the documentation
+  and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE."""
+__author__ = 'Mark Pilgrim '
+__contributors__ = ['Jason Diamond ',
+                    'John Beimler ',
+                    'Fazal Majid '
+                    , 'Aaron Swartz ',
+                    'Kevin Marks ']
+_debug = 0
+
+# HTTP "User-Agent" header to send to servers when downloading feeds.
+# If you are embedding feedparser in a larger application, you should
+# change this to your application name and URL.
+
+USER_AGENT = 'UniversalFeedParser/%s +http://feedparser.org/'\
+     % __version__
+
+# HTTP "Accept" header to send to servers when downloading feeds.  If you don't
+# want to send an Accept header, set this to None.
+
+ACCEPT_HEADER = \
+    'application/atom+xml,application/rdf+xml,application/rss+xml,application/x-netcdf,application/xml;q=0.9,text/xml;q=0.2,*/*;q=0.1'
+
+# List of preferred XML parsers, by SAX driver name.  These will be tried first,
+# but if they're not installed, Python will keep searching through its own list
+# of pre-installed parsers until it finds one that supports everything we need.
+
+PREFERRED_XML_PARSERS = ['drv_libxml2']
+
+# If you want feedparser to automatically run HTML markup through HTML Tidy, set
+# this to 1.  Requires mxTidy 
+# or utidylib .
+
+TIDY_MARKUP = 0
+
+# List of Python interfaces for HTML Tidy, in order of preference.  Only useful
+# if TIDY_MARKUP = 1
+
+PREFERRED_TIDY_INTERFACES = ['uTidy', 'mxTidy']
+
+# ---------- required modules (should come with any Python distribution) ----------
+
+import sgmllib
+import re
+import sys
+import copy
+import urlparse
+import time
+import rfc822
+import types
+import cgi
+import urllib
+import urllib2
+try:
+    from cStringIO import StringIO as _StringIO
+except:
+    from StringIO import StringIO as _StringIO
+
+# ---------- optional modules (feedparser will work without these, but with reduced functionality) ----------
+
+# gzip is included with most Python distributions, but may not be available if you compiled your own
+
+try:
+    import gzip
+except:
+    gzip = None
+try:
+    import zlib
+except:
+    zlib = None
+
+# If a real XML parser is available, feedparser will attempt to use it.  feedparser has
+# been tested with the built-in SAX parser, PyXML, and libxml2.  On platforms where the
+# Python distribution does not come with an XML parser (such as Mac OS X 10.2 and some
+# versions of FreeBSD), feedparser will quietly fall back on regex-based parsing.
+
+try:
+    import xml.sax
+    xml.sax.make_parser(PREFERRED_XML_PARSERS)  # test for valid parsers
+    from xml.sax.saxutils import escape as _xmlescape
+    _XML_AVAILABLE = 1
+except:
+    _XML_AVAILABLE = 0
+
+
+    def _xmlescape(data):
+        data = data.replace('&', '&')
+        data = data.replace('>', '>')
+        data = data.replace('<', '<')
+        return data
+
+
+# base64 support for Atom feeds that contain embedded binary data
+
+try:
+    import base64
+    import binascii
+except:
+    base64 = binascii = None
+
+# cjkcodecs and iconv_codec provide support for more character encodings.
+# Both are available from http://cjkpython.i18n.org/
+
+try:
+    import cjkcodecs.aliases
+except:
+    pass
+try:
+    import iconv_codec
+except:
+    pass
+
+# chardet library auto-detects character encodings
+# Download from http://chardet.feedparser.org/
+
+try:
+    import chardet
+    if _debug:
+        import chardet.constants
+        chardet.constants._debug = 1
+except:
+    chardet = None
+
+# ---------- don't touch these ----------
+
+
+class ThingsNobodyCaresAboutButMe(Exception):
+
+    pass
+
+
+class CharacterEncodingOverride(ThingsNobodyCaresAboutButMe):
+
+    pass
+
+
+class CharacterEncodingUnknown(ThingsNobodyCaresAboutButMe):
+
+    pass
+
+
+class NonXMLContentType(ThingsNobodyCaresAboutButMe):
+
+    pass
+
+
+class UndeclaredNamespace(Exception):
+
+    pass
+
+
+sgmllib.tagfind = re.compile('[a-zA-Z][-_.:a-zA-Z0-9]*')
+sgmllib.special = re.compile('' % (tag, ''.join([' %s="%s"'
+                                     % t for t in attrs])), escape=0)
+
+        # match namespaces
+
+        if tag.find(':') != -1:
+            (prefix, suffix) = tag.split(':', 1)
+        else:
+            (prefix, suffix) = ('', tag)
+        prefix = self.namespacemap.get(prefix, prefix)
+        if prefix:
+            prefix = prefix + '_'
+
+        # special hack for better tracking of empty textinput/image elements in illformed feeds
+
+        if not prefix and tag not in ('title', 'link', 'description',
+                'name'):
+            self.intextinput = 0
+        if not prefix and tag not in (
+            'title',
+            'link',
+            'description',
+            'url',
+            'href',
+            'width',
+            'height',
+            ):
+            self.inimage = 0
+
+        # call special handler (if defined) or default handler
+
+        methodname = '_start_' + prefix + suffix
+        try:
+            method = getattr(self, methodname)
+            return method(attrsD)
+        except AttributeError:
+            return self.push(prefix + suffix, 1)
+
+    def unknown_endtag(self, tag):
+        if _debug:
+            sys.stderr.write('end %s\n' % tag)
+
+        # match namespaces
+
+        if tag.find(':') != -1:
+            (prefix, suffix) = tag.split(':', 1)
+        else:
+            (prefix, suffix) = ('', tag)
+        prefix = self.namespacemap.get(prefix, prefix)
+        if prefix:
+            prefix = prefix + '_'
+
+        # call special handler (if defined) or default handler
+
+        methodname = '_end_' + prefix + suffix
+        try:
+            method = getattr(self, methodname)
+            method()
+        except AttributeError:
+            self.pop(prefix + suffix)
+
+        # track inline content
+
+        if self.incontent and self.contentparams.has_key('type')\
+             and not self.contentparams.get('type', 'xml'
+                ).endswith('xml'):
+
+            # element declared itself as escaped markup, but it isn't really
+
+            self.contentparams['type'] = 'application/xhtml+xml'
+        if self.incontent and self.contentparams.get('type')\
+             == 'application/xhtml+xml':
+            tag = tag.split(':')[-1]
+            self.handle_data('' % tag, escape=0)
+
+        # track xml:base and xml:lang going out of scope
+
+        if self.basestack:
+            self.basestack.pop()
+            if self.basestack and self.basestack[-1]:
+                self.baseuri = self.basestack[-1]
+        if self.langstack:
+            self.langstack.pop()
+            if self.langstack:  # and (self.langstack[-1] is not None):
+                self.lang = self.langstack[-1]
+
+    def handle_charref(self, ref):
+
+        # called for each character reference, e.g. for ' ', ref will be '160'
+
+        if not self.elementstack:
+            return
+        ref = ref.lower()
+        if ref in (
+            '34',
+            '38',
+            '39',
+            '60',
+            '62',
+            'x22',
+            'x26',
+            'x27',
+            'x3c',
+            'x3e',
+            ):
+            text = '&#%s;' % ref
+        else:
+            if ref[0] == 'x':
+                c = int(ref[1:], 16)
+            else:
+                c = int(ref)
+            text = unichr(c).encode('utf-8')
+        self.elementstack[-1][2].append(text)
+
+    def handle_entityref(self, ref):
+
+        # called for each entity reference, e.g. for '©', ref will be 'copy'
+
+        if not self.elementstack:
+            return
+        if _debug:
+            sys.stderr.write('entering handle_entityref with %s\n'
+                              % ref)
+        if ref in ('lt', 'gt', 'quot', 'amp', 'apos'):
+            text = '&%s;' % ref
+        else:
+
+            # entity resolution graciously donated by Aaron Swartz
+
+            def name2cp(k):
+                import htmlentitydefs
+                if hasattr(htmlentitydefs, 'name2codepoint'):  # requires Python 2.3
+                    return htmlentitydefs.name2codepoint[k]
+                k = htmlentitydefs.entitydefs[k]
+                if k.startswith('&#') and k.endswith(';'):
+                    return int(k[2:-1])  # not in latin-1
+                return ord(k)
+
+            try:
+                name2cp(ref)
+            except KeyError:
+                text = '&%s;' % ref
+            else:
+                text = unichr(name2cp(ref)).encode('utf-8')
+        self.elementstack[-1][2].append(text)
+
+    def handle_data(self, text, escape=1):
+
+        # called for each block of plain text, i.e. outside of any tag and
+        # not containing any character or entity references
+
+        if not self.elementstack:
+            return
+        if escape and self.contentparams.get('type')\
+             == 'application/xhtml+xml':
+            text = _xmlescape(text)
+        self.elementstack[-1][2].append(text)
+
+    def handle_comment(self, text):
+
+        # called for each comment, e.g. 
+
+        pass
+
+    def handle_pi(self, text):
+
+        # called for each processing instruction, e.g. 
+
+        pass
+
+    def handle_decl(self, text):
+        pass
+
+    def parse_declaration(self, i):
+
+        # override internal declaration handler to handle CDATA blocks
+
+        if _debug:
+            sys.stderr.write('entering parse_declaration\n')
+        if self.rawdata[i:i + 9] == '', i)
+            if k == -1:
+                k = len(self.rawdata)
+            self.handle_data(_xmlescape(self.rawdata[i + 9:k]), 0)
+            return k + 3
+        else:
+            k = self.rawdata.find('>', i)
+            return k + 1
+
+    def mapContentType(self, contentType):
+        contentType = contentType.lower()
+        if contentType == 'text':
+            contentType = 'text/plain'
+        elif contentType == 'html':
+            contentType = 'text/html'
+        elif contentType == 'xhtml':
+            contentType = 'application/xhtml+xml'
+        return contentType
+
+    def trackNamespace(self, prefix, uri):
+        loweruri = uri.lower()
+        if (prefix, loweruri) == (None,
+                                  'http://my.netscape.com/rdf/simple/0.9/'
+                                  ) and not self.version:
+            self.version = 'rss090'
+        if loweruri == 'http://purl.org/rss/1.0/' and not self.version:
+            self.version = 'rss10'
+        if loweruri == 'http://www.w3.org/2005/atom'\
+             and not self.version:
+            self.version = 'atom10'
+        if loweruri.find('backend.userland.com/rss') != -1:
+
+            # match any backend.userland.com namespace
+
+            uri = 'http://backend.userland.com/rss'
+            loweruri = uri
+        if self._matchnamespaces.has_key(loweruri):
+            self.namespacemap[prefix] = self._matchnamespaces[loweruri]
+            self.namespacesInUse[self._matchnamespaces[loweruri]] = uri
+        else:
+            self.namespacesInUse[prefix or ''] = uri
+
+    def resolveURI(self, uri):
+        return _urljoin(self.baseuri or '', uri)
+
+    def decodeEntities(self, element, data):
+        return data
+
+    def push(self, element, expectingText):
+        self.elementstack.append([element, expectingText, []])
+
+    def pop(self, element, stripWhitespace=1):
+        if not self.elementstack:
+            return
+        if self.elementstack[-1][0] != element:
+            return
+
+        (element, expectingText, pieces) = self.elementstack.pop()
+        output = ''.join(pieces)
+        if stripWhitespace:
+            output = output.strip()
+        if not expectingText:
+            return output
+
+        # decode base64 content
+
+        if base64 and self.contentparams.get('base64', 0):
+            try:
+                output = base64.decodestring(output)
+            except binascii.Error:
+                pass
+            except binascii.Incomplete:
+                pass
+
+        # resolve relative URIs
+
+        if element in self.can_be_relative_uri and output:
+            output = self.resolveURI(output)
+
+        # decode entities within embedded markup
+
+        if not self.contentparams.get('base64', 0):
+            output = self.decodeEntities(element, output)
+
+        # remove temporary cruft from contentparams
+
+        try:
+            del self.contentparams['mode']
+        except KeyError:
+            pass
+        try:
+            del self.contentparams['base64']
+        except KeyError:
+            pass
+
+        # resolve relative URIs within embedded markup
+
+        if self.mapContentType(self.contentparams.get('type',
+                               'text/html')) in self.html_types:
+            if element in self.can_contain_relative_uris:
+                output = _resolveRelativeURIs(output, self.baseuri,
+                        self.encoding)
+
+        # sanitize embedded markup
+
+        if self.mapContentType(self.contentparams.get('type',
+                               'text/html')) in self.html_types:
+            if element in self.can_contain_dangerous_markup:
+                output = _sanitizeHTML(output, self.encoding)
+
+        if self.encoding and type(output) != type(u''):
+            try:
+                output = unicode(output, self.encoding)
+            except:
+                pass
+
+        # categories/tags/keywords/whatever are handled in _end_category
+
+        if element == 'category':
+            return output
+
+        # store output in appropriate place(s)
+
+        if self.inentry and not self.insource:
+            if element == 'content':
+                self.entries[-1].setdefault(element, [])
+                contentparams = copy.deepcopy(self.contentparams)
+                contentparams['value'] = output
+                self.entries[-1][element].append(contentparams)
+            elif element == 'link':
+                self.entries[-1][element] = output
+                if output:
+                    self.entries[-1]['links'][-1]['href'] = output
+            else:
+                if element == 'description':
+                    element = 'summary'
+                self.entries[-1][element] = output
+                if self.incontent:
+                    contentparams = copy.deepcopy(self.contentparams)
+                    contentparams['value'] = output
+                    self.entries[-1][element + '_detail'] = \
+                        contentparams
+        elif (self.infeed or self.insource) and not self.intextinput\
+             and not self.inimage:
+            context = self._getContext()
+            if element == 'description':
+                element = 'subtitle'
+            context[element] = output
+            if element == 'link':
+                context['links'][-1]['href'] = output
+            elif self.incontent:
+                contentparams = copy.deepcopy(self.contentparams)
+                contentparams['value'] = output
+                context[element + '_detail'] = contentparams
+        return output
+
+    def pushContent(
+        self,
+        tag,
+        attrsD,
+        defaultContentType,
+        expectingText,
+        ):
+        self.incontent += 1
+        self.contentparams = FeedParserDict({'type'
+                : self.mapContentType(attrsD.get('type',
+                defaultContentType)), 'language': self.lang, 'base'
+                : self.baseuri})
+        self.contentparams['base64'] = self._isBase64(attrsD,
+                self.contentparams)
+        self.push(tag, expectingText)
+
+    def popContent(self, tag):
+        value = self.pop(tag)
+        self.incontent -= 1
+        self.contentparams.clear()
+        return value
+
+    def _mapToStandardPrefix(self, name):
+        colonpos = name.find(':')
+        if colonpos != -1:
+            prefix = name[:colonpos]
+            suffix = name[colonpos + 1:]
+            prefix = self.namespacemap.get(prefix, prefix)
+            name = prefix + ':' + suffix
+        return name
+
+    def _getAttribute(self, attrsD, name):
+        return attrsD.get(self._mapToStandardPrefix(name))
+
+    def _isBase64(self, attrsD, contentparams):
+        if attrsD.get('mode', '') == 'base64':
+            return 1
+        if self.contentparams['type'].startswith('text/'):
+            return 0
+        if self.contentparams['type'].endswith('+xml'):
+            return 0
+        if self.contentparams['type'].endswith('/xml'):
+            return 0
+        return 1
+
+    def _itsAnHrefDamnIt(self, attrsD):
+        href = attrsD.get('url', attrsD.get('uri', attrsD.get('href',
+                          None)))
+        if href:
+            try:
+                del attrsD['url']
+            except KeyError:
+                pass
+            try:
+                del attrsD['uri']
+            except KeyError:
+                pass
+            attrsD['href'] = href
+        return attrsD
+
+    def _save(self, key, value):
+        context = self._getContext()
+        context.setdefault(key, value)
+
+    def _start_rss(self, attrsD):
+        versionmap = {
+            '0.91': 'rss091u',
+            '0.92': 'rss092',
+            '0.93': 'rss093',
+            '0.94': 'rss094',
+            }
+        if not self.version:
+            attr_version = attrsD.get('version', '')
+            version = versionmap.get(attr_version)
+            if version:
+                self.version = version
+            elif attr_version.startswith('2.'):
+                self.version = 'rss20'
+            else:
+                self.version = 'rss'
+
+    def _start_dlhottitles(self, attrsD):
+        self.version = 'hotrss'
+
+    def _start_channel(self, attrsD):
+        self.infeed = 1
+        self._cdf_common(attrsD)
+
+    _start_feedinfo = _start_channel
+
+    def _cdf_common(self, attrsD):
+        if attrsD.has_key('lastmod'):
+            self._start_modified({})
+            self.elementstack[-1][-1] = attrsD['lastmod']
+            self._end_modified()
+        if attrsD.has_key('href'):
+            self._start_link({})
+            self.elementstack[-1][-1] = attrsD['href']
+            self._end_link()
+
+    def _start_feed(self, attrsD):
+        self.infeed = 1
+        versionmap = {'0.1': 'atom01', '0.2': 'atom02', '0.3': 'atom03'}
+        if not self.version:
+            attr_version = attrsD.get('version')
+            version = versionmap.get(attr_version)
+            if version:
+                self.version = version
+            else:
+                self.version = 'atom'
+
+    def _end_channel(self):
+        self.infeed = 0
+
+    _end_feed = _end_channel
+
+    def _start_image(self, attrsD):
+        self.inimage = 1
+        self.push('image', 0)
+        context = self._getContext()
+        context.setdefault('image', FeedParserDict())
+
+    def _end_image(self):
+        self.pop('image')
+        self.inimage = 0
+
+    def _start_textinput(self, attrsD):
+        self.intextinput = 1
+        self.push('textinput', 0)
+        context = self._getContext()
+        context.setdefault('textinput', FeedParserDict())
+
+    _start_textInput = _start_textinput
+
+    def _end_textinput(self):
+        self.pop('textinput')
+        self.intextinput = 0
+
+    _end_textInput = _end_textinput
+
+    def _start_author(self, attrsD):
+        self.inauthor = 1
+        self.push('author', 1)
+
+    _start_managingeditor = _start_author
+    _start_dc_author = _start_author
+    _start_dc_creator = _start_author
+    _start_itunes_author = _start_author
+
+    def _end_author(self):
+        self.pop('author')
+        self.inauthor = 0
+        self._sync_author_detail()
+
+    _end_managingeditor = _end_author
+    _end_dc_author = _end_author
+    _end_dc_creator = _end_author
+    _end_itunes_author = _end_author
+
+    def _start_itunes_owner(self, attrsD):
+        self.inpublisher = 1
+        self.push('publisher', 0)
+
+    def _end_itunes_owner(self):
+        self.pop('publisher')
+        self.inpublisher = 0
+        self._sync_author_detail('publisher')
+
+    def _start_contributor(self, attrsD):
+        self.incontributor = 1
+        context = self._getContext()
+        context.setdefault('contributors', [])
+        context['contributors'].append(FeedParserDict())
+        self.push('contributor', 0)
+
+    def _end_contributor(self):
+        self.pop('contributor')
+        self.incontributor = 0
+
+    def _start_dc_contributor(self, attrsD):
+        self.incontributor = 1
+        context = self._getContext()
+        context.setdefault('contributors', [])
+        context['contributors'].append(FeedParserDict())
+        self.push('name', 0)
+
+    def _end_dc_contributor(self):
+        self._end_name()
+        self.incontributor = 0
+
+    def _start_name(self, attrsD):
+        self.push('name', 0)
+
+    _start_itunes_name = _start_name
+
+    def _end_name(self):
+        value = self.pop('name')
+        if self.inpublisher:
+            self._save_author('name', value, 'publisher')
+        elif self.inauthor:
+            self._save_author('name', value)
+        elif self.incontributor:
+            self._save_contributor('name', value)
+        elif self.intextinput:
+            context = self._getContext()
+            context['textinput']['name'] = value
+
+    _end_itunes_name = _end_name
+
+    def _start_width(self, attrsD):
+        self.push('width', 0)
+
+    def _end_width(self):
+        value = self.pop('width')
+        try:
+            value = int(value)
+        except:
+            value = 0
+        if self.inimage:
+            context = self._getContext()
+            context['image']['width'] = value
+
+    def _start_height(self, attrsD):
+        self.push('height', 0)
+
+    def _end_height(self):
+        value = self.pop('height')
+        try:
+            value = int(value)
+        except:
+            value = 0
+        if self.inimage:
+            context = self._getContext()
+            context['image']['height'] = value
+
+    def _start_url(self, attrsD):
+        self.push('href', 1)
+
+    _start_homepage = _start_url
+    _start_uri = _start_url
+
+    def _end_url(self):
+        value = self.pop('href')
+        if self.inauthor:
+            self._save_author('href', value)
+        elif self.incontributor:
+            self._save_contributor('href', value)
+        elif self.inimage:
+            context = self._getContext()
+            context['image']['href'] = value
+        elif self.intextinput:
+            context = self._getContext()
+            context['textinput']['link'] = value
+
+    _end_homepage = _end_url
+    _end_uri = _end_url
+
+    def _start_email(self, attrsD):
+        self.push('email', 0)
+
+    _start_itunes_email = _start_email
+
+    def _end_email(self):
+        value = self.pop('email')
+        if self.inpublisher:
+            self._save_author('email', value, 'publisher')
+        elif self.inauthor:
+            self._save_author('email', value)
+        elif self.incontributor:
+            self._save_contributor('email', value)
+
+    _end_itunes_email = _end_email
+
+    def _getContext(self):
+        if self.insource:
+            context = self.sourcedata
+        elif self.inentry:
+            context = self.entries[-1]
+        else:
+            context = self.feeddata
+        return context
+
+    def _save_author(
+        self,
+        key,
+        value,
+        prefix='author',
+        ):
+        context = self._getContext()
+        context.setdefault(prefix + '_detail', FeedParserDict())
+        context[prefix + '_detail'][key] = value
+        self._sync_author_detail()
+
+    def _save_contributor(self, key, value):
+        context = self._getContext()
+        context.setdefault('contributors', [FeedParserDict()])
+        context['contributors'][-1][key] = value
+
+    def _sync_author_detail(self, key='author'):
+        context = self._getContext()
+        detail = context.get('%s_detail' % key)
+        if detail:
+            name = detail.get('name')
+            email = detail.get('email')
+            if name and email:
+                context[key] = '%s (%s)' % (name, email)
+            elif name:
+                context[key] = name
+            elif email:
+                context[key] = email
+        else:
+            author = context.get(key)
+            if not author:
+                return
+            emailmatch = \
+                re.search(r'''(([a-zA-Z0-9\_\-\.\+]+)@((\[[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.)|(([a-zA-Z0-9\-]+\.)+))([a-zA-Z]{2,4}|[0-9]{1,3})(\]?))'''
+                          , author)
+            if not emailmatch:
+                return
+            email = emailmatch.group(0)
+
+            # probably a better way to do the following, but it passes all the tests
+
+            author = author.replace(email, '')
+            author = author.replace('()', '')
+            author = author.strip()
+            if author and author[0] == '(':
+                author = author[1:]
+            if author and author[-1] == ')':
+                author = author[:-1]
+            author = author.strip()
+            context.setdefault('%s_detail' % key, FeedParserDict())
+            context['%s_detail' % key]['name'] = author
+            context['%s_detail' % key]['email'] = email
+
+    def _start_subtitle(self, attrsD):
+        self.pushContent('subtitle', attrsD, 'text/plain', 1)
+
+    _start_tagline = _start_subtitle
+    _start_itunes_subtitle = _start_subtitle
+
+    def _end_subtitle(self):
+        self.popContent('subtitle')
+
+    _end_tagline = _end_subtitle
+    _end_itunes_subtitle = _end_subtitle
+
+    def _start_rights(self, attrsD):
+        self.pushContent('rights', attrsD, 'text/plain', 1)
+
+    _start_dc_rights = _start_rights
+    _start_copyright = _start_rights
+
+    def _end_rights(self):
+        self.popContent('rights')
+
+    _end_dc_rights = _end_rights
+    _end_copyright = _end_rights
+
+    def _start_item(self, attrsD):
+        self.entries.append(FeedParserDict())
+        self.push('item', 0)
+        self.inentry = 1
+        self.guidislink = 0
+        id = self._getAttribute(attrsD, 'rdf:about')
+        if id:
+            context = self._getContext()
+            context['id'] = id
+        self._cdf_common(attrsD)
+
+    _start_entry = _start_item
+    _start_product = _start_item
+
+    def _end_item(self):
+        self.pop('item')
+        self.inentry = 0
+
+    _end_entry = _end_item
+
+    def _start_dc_language(self, attrsD):
+        self.push('language', 1)
+
+    _start_language = _start_dc_language
+
+    def _end_dc_language(self):
+        self.lang = self.pop('language')
+
+    _end_language = _end_dc_language
+
+    def _start_dc_publisher(self, attrsD):
+        self.push('publisher', 1)
+
+    _start_webmaster = _start_dc_publisher
+
+    def _end_dc_publisher(self):
+        self.pop('publisher')
+        self._sync_author_detail('publisher')
+
+    _end_webmaster = _end_dc_publisher
+
+    def _start_published(self, attrsD):
+        self.push('published', 1)
+
+    _start_dcterms_issued = _start_published
+    _start_issued = _start_published
+
+    def _end_published(self):
+        value = self.pop('published')
+        self._save('published_parsed', _parse_date(value))
+
+    _end_dcterms_issued = _end_published
+    _end_issued = _end_published
+
+    def _start_updated(self, attrsD):
+        self.push('updated', 1)
+
+    _start_modified = _start_updated
+    _start_dcterms_modified = _start_updated
+    _start_pubdate = _start_updated
+    _start_dc_date = _start_updated
+
+    def _end_updated(self):
+        value = self.pop('updated')
+        parsed_value = _parse_date(value)
+        self._save('updated_parsed', parsed_value)
+
+    _end_modified = _end_updated
+    _end_dcterms_modified = _end_updated
+    _end_pubdate = _end_updated
+    _end_dc_date = _end_updated
+
+    def _start_created(self, attrsD):
+        self.push('created', 1)
+
+    _start_dcterms_created = _start_created
+
+    def _end_created(self):
+        value = self.pop('created')
+        self._save('created_parsed', _parse_date(value))
+
+    _end_dcterms_created = _end_created
+
+    def _start_expirationdate(self, attrsD):
+        self.push('expired', 1)
+
+    def _end_expirationdate(self):
+        self._save('expired_parsed', _parse_date(self.pop('expired')))
+
+    def _start_cc_license(self, attrsD):
+        self.push('license', 1)
+        value = self._getAttribute(attrsD, 'rdf:resource')
+        if value:
+            self.elementstack[-1][2].append(value)
+        self.pop('license')
+
+    def _start_creativecommons_license(self, attrsD):
+        self.push('license', 1)
+
+    def _end_creativecommons_license(self):
+        self.pop('license')
+
+    def _addTag(
+        self,
+        term,
+        scheme,
+        label,
+        ):
+        context = self._getContext()
+        tags = context.setdefault('tags', [])
+        if not term and not scheme and not label:
+            return
+        value = FeedParserDict({'term': term, 'scheme': scheme, 'label'
+                               : label})
+        if value not in tags:
+            tags.append(FeedParserDict({'term': term, 'scheme': scheme,
+                        'label': label}))
+
+    def _start_category(self, attrsD):
+        if _debug:
+            sys.stderr.write('entering _start_category with %s\n'
+                              % repr(attrsD))
+        term = attrsD.get('term')
+        scheme = attrsD.get('scheme', attrsD.get('domain'))
+        label = attrsD.get('label')
+        self._addTag(term, scheme, label)
+        self.push('category', 1)
+
+    _start_dc_subject = _start_category
+    _start_keywords = _start_category
+
+    def _end_itunes_keywords(self):
+        for term in self.pop('itunes_keywords').split():
+            self._addTag(term, 'http://www.itunes.com/', None)
+
+    def _start_itunes_category(self, attrsD):
+        self._addTag(attrsD.get('text'), 'http://www.itunes.com/', None)
+        self.push('category', 1)
+
+    def _end_category(self):
+        value = self.pop('category')
+        if not value:
+            return
+        context = self._getContext()
+        tags = context['tags']
+        if value and len(tags) and not tags[-1]['term']:
+            tags[-1]['term'] = value
+        else:
+            self._addTag(value, None, None)
+
+    _end_dc_subject = _end_category
+    _end_keywords = _end_category
+    _end_itunes_category = _end_category
+
+    def _start_cloud(self, attrsD):
+        self._getContext()['cloud'] = FeedParserDict(attrsD)
+
+    def _start_link(self, attrsD):
+        attrsD.setdefault('rel', 'alternate')
+        attrsD.setdefault('type', 'text/html')
+        attrsD = self._itsAnHrefDamnIt(attrsD)
+        if attrsD.has_key('href'):
+            attrsD['href'] = self.resolveURI(attrsD['href'])
+        expectingText = self.infeed or self.inentry or self.insource
+        context = self._getContext()
+        context.setdefault('links', [])
+        context['links'].append(FeedParserDict(attrsD))
+        if attrsD['rel'] == 'enclosure':
+            self._start_enclosure(attrsD)
+        if attrsD.has_key('href'):
+            expectingText = 0
+            if attrsD.get('rel') == 'alternate'\
+                 and self.mapContentType(attrsD.get('type'))\
+                 in self.html_types:
+                context['link'] = attrsD['href']
+        else:
+            self.push('link', expectingText)
+
+    _start_producturl = _start_link
+
+    def _end_link(self):
+        value = self.pop('link')
+        context = self._getContext()
+        if self.intextinput:
+            context['textinput']['link'] = value
+        if self.inimage:
+            context['image']['link'] = value
+
+    _end_producturl = _end_link
+
+    def _start_guid(self, attrsD):
+        self.guidislink = attrsD.get('ispermalink', 'true') == 'true'
+        self.push('id', 1)
+
+    def _end_guid(self):
+        value = self.pop('id')
+        self._save('guidislink', self.guidislink
+                    and not self._getContext().has_key('link'))
+        if self.guidislink:
+
+            # guid acts as link, but only if 'ispermalink' is not present or is 'true',
+            # and only if the item doesn't already have a link element
+
+            self._save('link', value)
+
+    def _start_title(self, attrsD):
+        self.pushContent('title', attrsD, 'text/plain', self.infeed
+                          or self.inentry or self.insource)
+
+    _start_dc_title = _start_title
+    _start_media_title = _start_title
+
+    def _end_title(self):
+        value = self.popContent('title')
+        context = self._getContext()
+        if self.intextinput:
+            context['textinput']['title'] = value
+        elif self.inimage:
+            context['image']['title'] = value
+
+    _end_dc_title = _end_title
+    _end_media_title = _end_title
+
+    def _start_description(self, attrsD):
+        context = self._getContext()
+        if context.has_key('summary'):
+            self._summaryKey = 'content'
+            self._start_content(attrsD)
+        else:
+            self.pushContent('description', attrsD, 'text/html',
+                             self.infeed or self.inentry
+                              or self.insource)
+
+    def _start_abstract(self, attrsD):
+        self.pushContent('description', attrsD, 'text/plain',
+                         self.infeed or self.inentry or self.insource)
+
+    def _end_description(self):
+        if self._summaryKey == 'content':
+            self._end_content()
+        else:
+            value = self.popContent('description')
+            context = self._getContext()
+            if self.intextinput:
+                context['textinput']['description'] = value
+            elif self.inimage:
+                context['image']['description'] = value
+        self._summaryKey = None
+
+    _end_abstract = _end_description
+
+    def _start_info(self, attrsD):
+        self.pushContent('info', attrsD, 'text/plain', 1)
+
+    _start_feedburner_browserfriendly = _start_info
+
+    def _end_info(self):
+        self.popContent('info')
+
+    _end_feedburner_browserfriendly = _end_info
+
+    def _start_generator(self, attrsD):
+        if attrsD:
+            attrsD = self._itsAnHrefDamnIt(attrsD)
+            if attrsD.has_key('href'):
+                attrsD['href'] = self.resolveURI(attrsD['href'])
+        self._getContext()['generator_detail'] = FeedParserDict(attrsD)
+        self.push('generator', 1)
+
+    def _end_generator(self):
+        value = self.pop('generator')
+        context = self._getContext()
+        if context.has_key('generator_detail'):
+            context['generator_detail']['name'] = value
+
+    def _start_admin_generatoragent(self, attrsD):
+        self.push('generator', 1)
+        value = self._getAttribute(attrsD, 'rdf:resource')
+        if value:
+            self.elementstack[-1][2].append(value)
+        self.pop('generator')
+        self._getContext()['generator_detail'] = FeedParserDict({'href'
+                : value})
+
+    def _start_admin_errorreportsto(self, attrsD):
+        self.push('errorreportsto', 1)
+        value = self._getAttribute(attrsD, 'rdf:resource')
+        if value:
+            self.elementstack[-1][2].append(value)
+        self.pop('errorreportsto')
+
+    def _start_summary(self, attrsD):
+        context = self._getContext()
+        if context.has_key('summary'):
+            self._summaryKey = 'content'
+            self._start_content(attrsD)
+        else:
+            self._summaryKey = 'summary'
+            self.pushContent(self._summaryKey, attrsD, 'text/plain', 1)
+
+    _start_itunes_summary = _start_summary
+
+    def _end_summary(self):
+        if self._summaryKey == 'content':
+            self._end_content()
+        else:
+            self.popContent(self._summaryKey or 'summary')
+        self._summaryKey = None
+
+    _end_itunes_summary = _end_summary
+
+    def _start_enclosure(self, attrsD):
+        attrsD = self._itsAnHrefDamnIt(attrsD)
+        self._getContext().setdefault('enclosures',
+                []).append(FeedParserDict(attrsD))
+        href = attrsD.get('href')
+        if href:
+            context = self._getContext()
+            if not context.get('id'):
+                context['id'] = href
+
+    def _start_source(self, attrsD):
+        self.insource = 1
+
+    def _end_source(self):
+        self.insource = 0
+        self._getContext()['source'] = copy.deepcopy(self.sourcedata)
+        self.sourcedata.clear()
+
+    def _start_content(self, attrsD):
+        self.pushContent('content', attrsD, 'text/plain', 1)
+        src = attrsD.get('src')
+        if src:
+            self.contentparams['src'] = src
+        self.push('content', 1)
+
+    def _start_prodlink(self, attrsD):
+        self.pushContent('content', attrsD, 'text/html', 1)
+
+    def _start_body(self, attrsD):
+        self.pushContent('content', attrsD, 'application/xhtml+xml', 1)
+
+    _start_xhtml_body = _start_body
+
+    def _start_content_encoded(self, attrsD):
+        self.pushContent('content', attrsD, 'text/html', 1)
+
+    _start_fullitem = _start_content_encoded
+
+    def _end_content(self):
+        copyToDescription = \
+            self.mapContentType(self.contentparams.get('type'))\
+             in ['text/plain'] + self.html_types
+        value = self.popContent('content')
+        if copyToDescription:
+            self._save('description', value)
+
+    _end_body = _end_content
+    _end_xhtml_body = _end_content
+    _end_content_encoded = _end_content
+    _end_fullitem = _end_content
+    _end_prodlink = _end_content
+
+    def _start_itunes_image(self, attrsD):
+        self.push('itunes_image', 0)
+        self._getContext()['image'] = FeedParserDict({'href'
+                : attrsD.get('href')})
+
+    _start_itunes_link = _start_itunes_image
+
+    def _end_itunes_block(self):
+        value = self.pop('itunes_block', 0)
+        self._getContext()['itunes_block'] = value == 'yes' and 1 or 0
+
+    def _end_itunes_explicit(self):
+        value = self.pop('itunes_explicit', 0)
+        self._getContext()['itunes_explicit'] = value == 'yes' and 1\
+             or 0
+
+
+if _XML_AVAILABLE:
+
+
+    class _StrictFeedParser(_FeedParserMixin,
+        xml.sax.handler.ContentHandler):
+
+        def __init__(
+            self,
+            baseuri,
+            baselang,
+            encoding,
+            ):
+            if _debug:
+                sys.stderr.write('trying StrictFeedParser\n')
+            xml.sax.handler.ContentHandler.__init__(self)
+            _FeedParserMixin.__init__(self, baseuri, baselang, encoding)
+            self.bozo = 0
+            self.exc = None
+
+        def startPrefixMapping(self, prefix, uri):
+            self.trackNamespace(prefix, uri)
+
+        def startElementNS(
+            self,
+            name,
+            qname,
+            attrs,
+            ):
+            (namespace, localname) = name
+            lowernamespace = str(namespace or '').lower()
+            if lowernamespace.find('backend.userland.com/rss') != -1:
+
+                # match any backend.userland.com namespace
+
+                namespace = 'http://backend.userland.com/rss'
+                lowernamespace = namespace
+            if qname and qname.find(':') > 0:
+                givenprefix = qname.split(':')[0]
+            else:
+                givenprefix = None
+            prefix = self._matchnamespaces.get(lowernamespace,
+                    givenprefix)
+            if givenprefix and (prefix == None or prefix == ''
+                                 and lowernamespace == '')\
+                 and not self.namespacesInUse.has_key(givenprefix):
+                raise UndeclaredNamespace, \
+                    "'%s' is not associated with a namespace"\
+                     % givenprefix
+            if prefix:
+                localname = prefix + ':' + localname
+            localname = str(localname).lower()
+            if _debug:
+                sys.stderr.write('startElementNS: qname = %s, namespace = %s, givenprefix = %s, prefix = %s, attrs = %s, localname = %s\n'
+                                  % (
+                    qname,
+                    namespace,
+                    givenprefix,
+                    prefix,
+                    attrs.items(),
+                    localname,
+                    ))
+
+            # qname implementation is horribly broken in Python 2.1 (it
+            # doesn't report any), and slightly broken in Python 2.2 (it
+            # doesn't report the xml: namespace). So we match up namespaces
+            # with a known list first, and then possibly override them with
+            # the qnames the SAX parser gives us (if indeed it gives us any
+            # at all).  Thanks to MatejC for helping me test this and
+            # tirelessly telling me that it didn't work yet.
+
+            attrsD = {}
+            for ((namespace, attrlocalname), attrvalue) in \
+                attrs._attrs.items():
+                lowernamespace = (namespace or '').lower()
+                prefix = self._matchnamespaces.get(lowernamespace, '')
+                if prefix:
+                    attrlocalname = prefix + ':' + attrlocalname
+                attrsD[str(attrlocalname).lower()] = attrvalue
+            for qname in attrs.getQNames():
+                attrsD[str(qname).lower()] = \
+                    attrs.getValueByQName(qname)
+            self.unknown_starttag(localname, attrsD.items())
+
+        def characters(self, text):
+            self.handle_data(text)
+
+        def endElementNS(self, name, qname):
+            (namespace, localname) = name
+            lowernamespace = str(namespace or '').lower()
+            if qname and qname.find(':') > 0:
+                givenprefix = qname.split(':')[0]
+            else:
+                givenprefix = ''
+            prefix = self._matchnamespaces.get(lowernamespace,
+                    givenprefix)
+            if prefix:
+                localname = prefix + ':' + localname
+            localname = str(localname).lower()
+            self.unknown_endtag(localname)
+
+        def error(self, exc):
+            self.bozo = 1
+            self.exc = exc
+
+        def fatalError(self, exc):
+            self.error(exc)
+            raise exc
+
+
+class _BaseHTMLProcessor(sgmllib.SGMLParser):
+
+    elements_no_end_tag = [
+        'area',
+        'base',
+        'basefont',
+        'br',
+        'col',
+        'frame',
+        'hr',
+        'img',
+        'input',
+        'isindex',
+        'link',
+        'meta',
+        'param',
+        ]
+
+    def __init__(self, encoding):
+        self.encoding = encoding
+        if _debug:
+            sys.stderr.write('entering BaseHTMLProcessor, encoding=%s\n'
+                              % self.encoding)
+        sgmllib.SGMLParser.__init__(self)
+
+    def reset(self):
+        self.pieces = []
+        sgmllib.SGMLParser.reset(self)
+
+    def _shorttag_replace(self, match):
+        tag = match.group(1)
+        if tag in self.elements_no_end_tag:
+            return '<' + tag + ' />'
+        else:
+            return '<' + tag + '>'
+
+    def feed(self, data):
+        data = re.compile(r'', self._shorttag_replace, data) # bug [ 1399464 ] Bad regexp for _shorttag_replace
+
+        data = re.sub(r'<([^<\s]+?)\s*/>', self._shorttag_replace, data)
+        data = data.replace(''', "'")
+        data = data.replace('"', '"')
+        if self.encoding and type(data) == type(u''):
+            data = data.encode(self.encoding)
+        sgmllib.SGMLParser.feed(self, data)
+
+    def normalize_attrs(self, attrs):
+
+        # utility method to be called by descendants
+
+        attrs = [(k.lower(), v) for (k, v) in attrs]
+        attrs = [(k, k in ('rel', 'type') and v.lower() or v) for (k,
+                 v) in attrs]
+        return attrs
+
+    def unknown_starttag(self, tag, attrs):
+
+        # called for each start tag
+        # attrs is a list of (attr, value) tuples
+        # e.g. for 
    , tag='pre', attrs=[('class', 'screen')]
+
+        if _debug:
+            sys.stderr.write('_BaseHTMLProcessor, unknown_starttag, tag=%s\n'
+                              % tag)
+        uattrs = []
+
+        # thanks to Kevin Marks for this breathtaking hack to deal with (valid) high-bit attribute values in UTF-8 feeds
+
+        for (key, value) in attrs:
+            if type(value) != type(u''):
+                value = unicode(value, self.encoding)
+            uattrs.append((unicode(key, self.encoding), value))
+        strattrs = u''.join([u' %s="%s"' % (key, value) for (key,
+                            value) in uattrs]).encode(self.encoding)
+        if tag in self.elements_no_end_tag:
+            self.pieces.append('<%(tag)s%(strattrs)s />' % locals())
+        else:
+            self.pieces.append('<%(tag)s%(strattrs)s>' % locals())
+
+    def unknown_endtag(self, tag):
+
+        # called for each end tag, e.g. for 
    , tag will be 'pre'
+        # Reconstruct the original end tag.
+
+        if tag not in self.elements_no_end_tag:
+            self.pieces.append('' % locals())
+
+    def handle_charref(self, ref):
+
+        # called for each character reference, e.g. for ' ', ref will be '160'
+        # Reconstruct the original character reference.
+
+        self.pieces.append('&#%(ref)s;' % locals())
+
+    def handle_entityref(self, ref):
+
+        # called for each entity reference, e.g. for '©', ref will be 'copy'
+        # Reconstruct the original entity reference.
+
+        self.pieces.append('&%(ref)s;' % locals())
+
+    def handle_data(self, text):
+
+        # called for each block of plain text, i.e. outside of any tag and
+        # not containing any character or entity references
+        # Store the original text verbatim.
+
+        if _debug:
+            sys.stderr.write('_BaseHTMLProcessor, handle_text, text=%s\n'
+                              % text)
+        self.pieces.append(text)
+
+    def handle_comment(self, text):
+
+        # called for each HTML comment, e.g. 
+        # Reconstruct the original comment.
+
+        self.pieces.append('' % locals())
+
+    def handle_pi(self, text):
+
+        # called for each processing instruction, e.g. 
+        # Reconstruct original processing instruction.
+
+        self.pieces.append('' % locals())
+
+    def handle_decl(self, text):
+
+        # called for the DOCTYPE, if present, e.g.
+        # 
+        # Reconstruct original DOCTYPE
+
+        self.pieces.append('' % locals())
+
+    _new_declname_match = re.compile(r'[a-zA-Z][-_.a-zA-Z0-9:]*\s*'
+            ).match
+
+    def _scan_name(self, i, declstartpos):
+        rawdata = self.rawdata
+        n = len(rawdata)
+        if i == n:
+            return (None, -1)
+        m = self._new_declname_match(rawdata, i)
+        if m:
+            s = m.group()
+            name = s.strip()
+            if i + len(s) == n:
+                return (None, -1)  # end of buffer
+            return (name.lower(), m.end())
+        else:
+            self.handle_data(rawdata)
+
+#            self.updatepos(declstartpos, i)
+
+            return (None, -1)
+
+    def output(self):
+        """Return processed HTML as a single string"""
+
+        return ''.join([str(p) for p in self.pieces])
+
+
+class _LooseFeedParser(_FeedParserMixin, _BaseHTMLProcessor):
+
+    def __init__(
+        self,
+        baseuri,
+        baselang,
+        encoding,
+        ):
+        sgmllib.SGMLParser.__init__(self)
+        _FeedParserMixin.__init__(self, baseuri, baselang, encoding)
+
+    def decodeEntities(self, element, data):
+        data = data.replace('<', '<')
+        data = data.replace('<', '<')
+        data = data.replace('>', '>')
+        data = data.replace('>', '>')
+        data = data.replace('&', '&')
+        data = data.replace('&', '&')
+        data = data.replace('"', '"')
+        data = data.replace('"', '"')
+        data = data.replace(''', ''')
+        data = data.replace(''', ''')
+        if self.contentparams.has_key('type')\
+             and not self.contentparams.get('type', 'xml'
+                ).endswith('xml'):
+            data = data.replace('<', '<')
+            data = data.replace('>', '>')
+            data = data.replace('&', '&')
+            data = data.replace('"', '"')
+            data = data.replace(''', "'")
+        return data
+
+
+class _RelativeURIResolver(_BaseHTMLProcessor):
+
+    relative_uris = [
+        ('a', 'href'),
+        ('applet', 'codebase'),
+        ('area', 'href'),
+        ('blockquote', 'cite'),
+        ('body', 'background'),
+        ('del', 'cite'),
+        ('form', 'action'),
+        ('frame', 'longdesc'),
+        ('frame', 'src'),
+        ('iframe', 'longdesc'),
+        ('iframe', 'src'),
+        ('head', 'profile'),
+        ('img', 'longdesc'),
+        ('img', 'src'),
+        ('img', 'usemap'),
+        ('input', 'src'),
+        ('input', 'usemap'),
+        ('ins', 'cite'),
+        ('link', 'href'),
+        ('object', 'classid'),
+        ('object', 'codebase'),
+        ('object', 'data'),
+        ('object', 'usemap'),
+        ('q', 'cite'),
+        ('script', 'src'),
+        ]
+
+    def __init__(self, baseuri, encoding):
+        _BaseHTMLProcessor.__init__(self, encoding)
+        self.baseuri = baseuri
+
+    def resolveURI(self, uri):
+        return _urljoin(self.baseuri, uri)
+
+    def unknown_starttag(self, tag, attrs):
+        attrs = self.normalize_attrs(attrs)
+        attrs = [(key, (tag, key) in self.relative_uris
+                  and self.resolveURI(value) or value) for (key,
+                 value) in attrs]
+        _BaseHTMLProcessor.unknown_starttag(self, tag, attrs)
+
+
+def _resolveRelativeURIs(htmlSource, baseURI, encoding):
+    if _debug:
+        sys.stderr.write('entering _resolveRelativeURIs\n')
+    p = _RelativeURIResolver(baseURI, encoding)
+    p.feed(htmlSource)
+    return p.output()
+
+
+class _HTMLSanitizer(_BaseHTMLProcessor):
+
+    acceptable_elements = [
+        'a',
+        'abbr',
+        'acronym',
+        'address',
+        'area',
+        'b',
+        'big',
+        'blockquote',
+        'br',
+        'button',
+        'caption',
+        'center',
+        'cite',
+        'code',
+        'col',
+        'colgroup',
+        'dd',
+        'del',
+        'dfn',
+        'dir',
+        'div',
+        'dl',
+        'dt',
+        'em',
+        'fieldset',
+        'font',
+        'form',
+        'h1',
+        'h2',
+        'h3',
+        'h4',
+        'h5',
+        'h6',
+        'hr',
+        'i',
+        'img',
+        'input',
+        'ins',
+        'kbd',
+        'label',
+        'legend',
+        'li',
+        'map',
+        'menu',
+        'ol',
+        'optgroup',
+        'option',
+        'p',
+        'pre',
+        'q',
+        's',
+        'samp',
+        'select',
+        'small',
+        'span',
+        'strike',
+        'strong',
+        'sub',
+        'sup',
+        'table',
+        'tbody',
+        'td',
+        'textarea',
+        'tfoot',
+        'th',
+        'thead',
+        'tr',
+        'tt',
+        'u',
+        'ul',
+        'var',
+        ]
+
+    acceptable_attributes = [
+        'abbr',
+        'accept',
+        'accept-charset',
+        'accesskey',
+        'action',
+        'align',
+        'alt',
+        'axis',
+        'border',
+        'cellpadding',
+        'cellspacing',
+        'char',
+        'charoff',
+        'charset',
+        'checked',
+        'cite',
+        'class',
+        'clear',
+        'cols',
+        'colspan',
+        'color',
+        'compact',
+        'coords',
+        'datetime',
+        'dir',
+        'disabled',
+        'enctype',
+        'for',
+        'frame',
+        'headers',
+        'height',
+        'href',
+        'hreflang',
+        'hspace',
+        'id',
+        'ismap',
+        'label',
+        'lang',
+        'longdesc',
+        'maxlength',
+        'media',
+        'method',
+        'multiple',
+        'name',
+        'nohref',
+        'noshade',
+        'nowrap',
+        'prompt',
+        'readonly',
+        'rel',
+        'rev',
+        'rows',
+        'rowspan',
+        'rules',
+        'scope',
+        'selected',
+        'shape',
+        'size',
+        'span',
+        'src',
+        'start',
+        'summary',
+        'tabindex',
+        'target',
+        'title',
+        'type',
+        'usemap',
+        'valign',
+        'value',
+        'vspace',
+        'width',
+        ]
+
+    unacceptable_elements_with_end_tag = ['script', 'applet']
+
+    def reset(self):
+        _BaseHTMLProcessor.reset(self)
+        self.unacceptablestack = 0
+
+    def unknown_starttag(self, tag, attrs):
+        if not tag in self.acceptable_elements:
+            if tag in self.unacceptable_elements_with_end_tag:
+                self.unacceptablestack += 1
+            return
+        attrs = self.normalize_attrs(attrs)
+        attrs = [(key, value) for (key, value) in attrs if key
+                  in self.acceptable_attributes]
+        _BaseHTMLProcessor.unknown_starttag(self, tag, attrs)
+
+    def unknown_endtag(self, tag):
+        if not tag in self.acceptable_elements:
+            if tag in self.unacceptable_elements_with_end_tag:
+                self.unacceptablestack -= 1
+            return
+        _BaseHTMLProcessor.unknown_endtag(self, tag)
+
+    def handle_pi(self, text):
+        pass
+
+    def handle_decl(self, text):
+        pass
+
+    def handle_data(self, text):
+        if not self.unacceptablestack:
+            _BaseHTMLProcessor.handle_data(self, text)
+
+
+def _sanitizeHTML(htmlSource, encoding):
+    p = _HTMLSanitizer(encoding)
+    p.feed(htmlSource)
+    data = p.output()
+    if TIDY_MARKUP:
+
+        # loop through list of preferred Tidy interfaces looking for one that's installed,
+        # then set up a common _tidy function to wrap the interface-specific API.
+
+        _tidy = None
+        for tidy_interface in PREFERRED_TIDY_INTERFACES:
+            try:
+                if tidy_interface == 'uTidy':
+                    from tidy import parseString as _utidy
+
+                    def _tidy(data, **kwargs):
+                        return str(_utidy(data, **kwargs))
+
+                    break
+                elif tidy_interface == 'mxTidy':
+                    from mx.Tidy import Tidy as _mxtidy
+
+                    def _tidy(data, **kwargs):
+                        (nerrors, nwarnings, data, errordata) = \
+                            _mxtidy.tidy(data, **kwargs)
+                        return data
+
+                    break
+            except:
+                pass
+        if _tidy:
+            utf8 = type(data) == type(u'')
+            if utf8:
+                data = data.encode('utf-8')
+            data = _tidy(data, output_xhtml=1, numeric_entities=1,
+                         wrap=0, char_encoding='utf8')
+            if utf8:
+                data = unicode(data, 'utf-8')
+            if data.count(''):
+                    data = data.split('>', 1)[1]
+            if data.count('= '2.3.3'
+            assert base64 != None
+            (user, passw) = \
+                base64.decodestring(req.headers['Authorization'
+                                    ].split(' ')[1]).split(':')
+            realm = re.findall('realm="([^"]*)"',
+                               headers['WWW-Authenticate'])[0]
+            self.add_password(realm, host, user, passw)
+            retry = self.http_error_auth_reqed('www-authenticate',
+                    host, req, headers)
+            self.reset_retry_count()
+            return retry
+        except:
+            return self.http_error_default(req, fp, code, msg, headers)
+
+
+def _open_resource(
+    url_file_stream_or_string,
+    etag,
+    modified,
+    agent,
+    referrer,
+    handlers,
+    ):
+    """URL, filename, or string --> stream
+
+    This function lets you define parsers that take any input source
+    (URL, pathname to local or network file, or actual data as a string)
+    and deal with it in a uniform manner.  Returned object is guaranteed
+    to have all the basic stdio read methods (read, readline, readlines).
+    Just .close() the object when you're done with it.
+
+    If the etag argument is supplied, it will be used as the value of an
+    If-None-Match request header.
+
+    If the modified argument is supplied, it must be a tuple of 9 integers
+    as returned by gmtime() in the standard Python time module. This MUST
+    be in GMT (Greenwich Mean Time). The formatted date/time will be used
+    as the value of an If-Modified-Since request header.
+
+    If the agent argument is supplied, it will be used as the value of a
+    User-Agent request header.
+
+    If the referrer argument is supplied, it will be used as the value of a
+    Referer[sic] request header.
+
+    If handlers is supplied, it is a list of handlers used to build a
+    urllib2 opener.
+    """
+
+    if hasattr(url_file_stream_or_string, 'read'):
+        return url_file_stream_or_string
+
+    if url_file_stream_or_string == '-':
+        return sys.stdin
+
+    if urlparse.urlparse(url_file_stream_or_string)[0] in ('http',
+            'https', 'ftp'):
+        if not agent:
+            agent = USER_AGENT
+
+        # test for inline user:password for basic auth
+
+        auth = None
+        if base64:
+            (urltype, rest) = \
+                urllib.splittype(url_file_stream_or_string)
+            (realhost, rest) = urllib.splithost(rest)
+            if realhost:
+                (user_passwd, realhost) = urllib.splituser(realhost)
+                if user_passwd:
+                    url_file_stream_or_string = '%s://%s%s' % (urltype,
+                            realhost, rest)
+                    auth = base64.encodestring(user_passwd).strip()
+
+        # try to open with urllib2 (to use optional headers)
+
+        request = urllib2.Request(url_file_stream_or_string)
+        request.add_header('User-Agent', agent)
+        if etag:
+            request.add_header('If-None-Match', etag)
+        if modified:
+
+            # format into an RFC 1123-compliant timestamp. We can't use
+            # time.strftime() since the %a and %b directives can be affected
+            # by the current locale, but RFC 2616 states that dates must be
+            # in English.
+
+            short_weekdays = [
+                'Mon',
+                'Tue',
+                'Wed',
+                'Thu',
+                'Fri',
+                'Sat',
+                'Sun',
+                ]
+            months = [
+                'Jan',
+                'Feb',
+                'Mar',
+                'Apr',
+                'May',
+                'Jun',
+                'Jul',
+                'Aug',
+                'Sep',
+                'Oct',
+                'Nov',
+                'Dec',
+                ]
+            request.add_header('If-Modified-Since',
+                               '%s, %02d %s %04d %02d:%02d:%02d GMT' % (
+                short_weekdays[modified[6]],
+                modified[2],
+                months[modified[1] - 1],
+                modified[0],
+                modified[3],
+                modified[4],
+                modified[5],
+                ))
+        if referrer:
+            request.add_header('Referer', referrer)
+        if gzip and zlib:
+            request.add_header('Accept-encoding', 'gzip, deflate')
+        elif gzip:
+            request.add_header('Accept-encoding', 'gzip')
+        elif zlib:
+            request.add_header('Accept-encoding', 'deflate')
+        else:
+            request.add_header('Accept-encoding', '')
+        if auth:
+            request.add_header('Authorization', 'Basic %s' % auth)
+        if ACCEPT_HEADER:
+            request.add_header('Accept', ACCEPT_HEADER)
+        request.add_header('A-IM', 'feed')  # RFC 3229 support
+        opener = apply(urllib2.build_opener, tuple([_FeedURLHandler()]
+                        + handlers))
+        opener.addheaders = []  # RMK - must clear so we only send our custom User-Agent
+        try:
+            return opener.open(request)
+        finally:
+            opener.close()  # JohnD
+
+    # try to open with native open function (if url_file_stream_or_string is a filename)
+
+    try:
+        return open(url_file_stream_or_string)
+    except:
+        pass
+
+    # treat url_file_stream_or_string as string
+
+    return _StringIO(str(url_file_stream_or_string))
+
+
+_date_handlers = []
+
+
+def registerDateHandler(func):
+    """Register a date handler function (takes string, returns 9-tuple date in GMT)"""
+
+    _date_handlers.insert(0, func)
+
+
+# ISO-8601 date parsing routines written by Fazal Majid.
+# The ISO 8601 standard is very convoluted and irregular - a full ISO 8601
+# parser is beyond the scope of feedparser and would be a worthwhile addition
+# to the Python library.
+# A single regular expression cannot parse ISO 8601 date formats into groups
+# as the standard is highly irregular (for instance is 030104 2003-01-04 or
+# 0301-04-01), so we use templates instead.
+# Please note the order in templates is significant because we need a
+# greedy match.
+
+_iso8601_tmpl = [
+    'YYYY-?MM-?DD',
+    'YYYY-MM',
+    'YYYY-?OOO',
+    'YY-?MM-?DD',
+    'YY-?OOO',
+    'YYYY',
+    '-YY-?MM',
+    '-OOO',
+    '-YY',
+    '--MM-?DD',
+    '--MM',
+    '---DD',
+    'CC',
+    '',
+    ]
+_iso8601_re = [tmpl.replace('YYYY', r'(?P\d{4})').replace('YY',
+               r'(?P\d\d)').replace('MM', r'(?P[01]\d)'
+               ).replace('DD', r'(?P[0123]\d)').replace('OOO',
+               r'(?P[0123]\d\d)').replace('CC',
+               r'(?P\d\d$)')
+                + r'(T?(?P\d{2}):(?P\d{2})'
+                + r'(:(?P\d{2}))?'
+                + r'(?P[+-](?P\d{2})(:(?P\d{2}))?|Z)?)?'
+                for tmpl in _iso8601_tmpl]
+del tmpl
+_iso8601_matches = [re.compile(regex).match for regex in _iso8601_re]
+del regex
+
+
+def _parse_date_iso8601(dateString):
+    """Parse a variety of ISO-8601-compatible formats like 20040105"""
+
+    m = None
+    for _iso8601_match in _iso8601_matches:
+        m = _iso8601_match(dateString)
+        if m:
+            break
+    if not m:
+        return
+    if m.span() == (0, 0):
+        return
+    params = m.groupdict()
+    ordinal = params.get('ordinal', 0)
+    if ordinal:
+        ordinal = int(ordinal)
+    else:
+        ordinal = 0
+    year = params.get('year', '--')
+    if not year or year == '--':
+        year = time.gmtime()[0]
+    elif len(year) == 2:
+
+        # ISO 8601 assumes current century, i.e. 93 -> 2093, NOT 1993
+
+        year = 100 * int(time.gmtime()[0] / 100) + int(year)
+    else:
+        year = int(year)
+    month = params.get('month', '-')
+    if not month or month == '-':
+
+        # ordinals are NOT normalized by mktime, we simulate them
+        # by setting month=1, day=ordinal
+
+        if ordinal:
+            month = 1
+        else:
+            month = time.gmtime()[1]
+    month = int(month)
+    day = params.get('day', 0)
+    if not day:
+
+        # see above
+
+        if ordinal:
+            day = ordinal
+        elif params.get('century', 0) or params.get('year', 0)\
+             or params.get('month', 0):
+            day = 1
+        else:
+            day = time.gmtime()[2]
+    else:
+        day = int(day)
+
+    # special case of the century - is the first year of the 21st century
+    # 2000 or 2001 ? The debate goes on...
+
+    if 'century' in params.keys():
+        year = (int(params['century']) - 1) * 100 + 1
+
+    # in ISO 8601 most fields are optional
+
+    for field in ['hour', 'minute', 'second', 'tzhour', 'tzmin']:
+        if not params.get(field, None):
+            params[field] = 0
+    hour = int(params.get('hour', 0))
+    minute = int(params.get('minute', 0))
+    second = int(params.get('second', 0))
+
+    # weekday is normalized by mktime(), we can ignore it
+
+    weekday = 0
+
+    # daylight savings is complex, but not needed for feedparser's purposes
+    # as time zones, if specified, include mention of whether it is active
+    # (e.g. PST vs. PDT, CET). Using -1 is implementation-dependent and
+    # and most implementations have DST bugs
+
+    daylight_savings_flag = 0
+    tm = [
+        year,
+        month,
+        day,
+        hour,
+        minute,
+        second,
+        weekday,
+        ordinal,
+        daylight_savings_flag,
+        ]
+
+    # ISO 8601 time zone adjustments
+
+    tz = params.get('tz')
+    if tz and tz != 'Z':
+        if tz[0] == '-':
+            tm[3] += int(params.get('tzhour', 0))
+            tm[4] += int(params.get('tzmin', 0))
+        elif tz[0] == '+':
+            tm[3] -= int(params.get('tzhour', 0))
+            tm[4] -= int(params.get('tzmin', 0))
+        else:
+            return None
+
+    # Python's time.mktime() is a wrapper around the ANSI C mktime(3c)
+    # which is guaranteed to normalize d/m/y/h/m/s.
+    # Many implementations have bugs, but we'll pretend they don't.
+
+    return time.localtime(time.mktime(tm))
+
+
+registerDateHandler(_parse_date_iso8601)
+
+# 8-bit date handling routines written by ytrewq1.
+
+_korean_year = u'\ub144'  # b3e2 in euc-kr
+_korean_month = u'\uc6d4'  # bff9 in euc-kr
+_korean_day = u'\uc77c'  # c0cf in euc-kr
+_korean_am = u'\uc624\uc804'  # bfc0 c0fc in euc-kr
+_korean_pm = u'\uc624\ud6c4'  # bfc0 c8c4 in euc-kr
+
+_korean_onblog_date_re = \
+    re.compile('(\d{4})%s\s+(\d{2})%s\s+(\d{2})%s\s+(\d{2}):(\d{2}):(\d{2})'
+                % (_korean_year, _korean_month, _korean_day))
+_korean_nate_date_re = \
+    re.compile(u'(\d{4})-(\d{2})-(\d{2})\s+(%s|%s)\s+(\d{,2}):(\d{,2}):(\d{,2})'
+                % (_korean_am, _korean_pm))
+
+
+def _parse_date_onblog(dateString):
+    """Parse a string according to the OnBlog 8-bit date format"""
+
+    m = _korean_onblog_date_re.match(dateString)
+    if not m:
+        return
+    w3dtfdate = \
+        '%(year)s-%(month)s-%(day)sT%(hour)s:%(minute)s:%(second)s%(zonediff)s'\
+         % {
+        'year': m.group(1),
+        'month': m.group(2),
+        'day': m.group(3),
+        'hour': m.group(4),
+        'minute': m.group(5),
+        'second': m.group(6),
+        'zonediff': '+09:00',
+        }
+    if _debug:
+        sys.stderr.write('OnBlog date parsed as: %s\n' % w3dtfdate)
+    return _parse_date_w3dtf(w3dtfdate)
+
+
+registerDateHandler(_parse_date_onblog)
+
+
+def _parse_date_nate(dateString):
+    """Parse a string according to the Nate 8-bit date format"""
+
+    m = _korean_nate_date_re.match(dateString)
+    if not m:
+        return
+    hour = int(m.group(5))
+    ampm = m.group(4)
+    if ampm == _korean_pm:
+        hour += 12
+    hour = str(hour)
+    if len(hour) == 1:
+        hour = '0' + hour
+    w3dtfdate = \
+        '%(year)s-%(month)s-%(day)sT%(hour)s:%(minute)s:%(second)s%(zonediff)s'\
+         % {
+        'year': m.group(1),
+        'month': m.group(2),
+        'day': m.group(3),
+        'hour': hour,
+        'minute': m.group(6),
+        'second': m.group(7),
+        'zonediff': '+09:00',
+        }
+    if _debug:
+        sys.stderr.write('Nate date parsed as: %s\n' % w3dtfdate)
+    return _parse_date_w3dtf(w3dtfdate)
+
+
+registerDateHandler(_parse_date_nate)
+
+_mssql_date_re = \
+    re.compile('(\d{4})-(\d{2})-(\d{2})\s+(\d{2}):(\d{2}):(\d{2})(\.\d+)?'
+               )
+
+
+def _parse_date_mssql(dateString):
+    """Parse a string according to the MS SQL date format"""
+
+    m = _mssql_date_re.match(dateString)
+    if not m:
+        return
+    w3dtfdate = \
+        '%(year)s-%(month)s-%(day)sT%(hour)s:%(minute)s:%(second)s%(zonediff)s'\
+         % {
+        'year': m.group(1),
+        'month': m.group(2),
+        'day': m.group(3),
+        'hour': m.group(4),
+        'minute': m.group(5),
+        'second': m.group(6),
+        'zonediff': '+09:00',
+        }
+    if _debug:
+        sys.stderr.write('MS SQL date parsed as: %s\n' % w3dtfdate)
+    return _parse_date_w3dtf(w3dtfdate)
+
+
+registerDateHandler(_parse_date_mssql)
+
+# Unicode strings for Greek date strings
+
+_greek_months = {
+    u'\u0399\u03b1\u03bd': u'Jan',
+    u'\u03a6\u03b5\u03b2': u'Feb',
+    u'\u039c\u03ac\u03ce': u'Mar',
+    u'\u039c\u03b1\u03ce': u'Mar',
+    u'\u0391\u03c0\u03c1': u'Apr',
+    u'\u039c\u03ac\u03b9': u'May',
+    u'\u039c\u03b1\u03ca': u'May',
+    u'\u039c\u03b1\u03b9': u'May',
+    u'\u0399\u03bf\u03cd\u03bd': u'Jun',
+    u'\u0399\u03bf\u03bd': u'Jun',
+    u'\u0399\u03bf\u03cd\u03bb': u'Jul',
+    u'\u0399\u03bf\u03bb': u'Jul',
+    u'\u0391\u03cd\u03b3': u'Aug',
+    u'\u0391\u03c5\u03b3': u'Aug',
+    u'\u03a3\u03b5\u03c0': u'Sep',
+    u'\u039f\u03ba\u03c4': u'Oct',
+    u'\u039d\u03bf\u03ad': u'Nov',
+    u'\u039d\u03bf\u03b5': u'Nov',
+    u'\u0394\u03b5\u03ba': u'Dec',
+    }
+
+_greek_wdays = {
+    u'\u039a\u03c5\u03c1': u'Sun',
+    u'\u0394\u03b5\u03c5': u'Mon',
+    u'\u03a4\u03c1\u03b9': u'Tue',
+    u'\u03a4\u03b5\u03c4': u'Wed',
+    u'\u03a0\u03b5\u03bc': u'Thu',
+    u'\u03a0\u03b1\u03c1': u'Fri',
+    u'\u03a3\u03b1\u03b2': u'Sat',
+    }
+
+_greek_date_format_re = \
+    re.compile(u'([^,]+),\s+(\d{2})\s+([^\s]+)\s+(\d{4})\s+(\d{2}):(\d{2}):(\d{2})\s+([^\s]+)'
+               )
+
+
+def _parse_date_greek(dateString):
+    """Parse a string according to a Greek 8-bit date format."""
+
+    m = _greek_date_format_re.match(dateString)
+    if not m:
+        return
+    try:
+        wday = _greek_wdays[m.group(1)]
+        month = _greek_months[m.group(3)]
+    except:
+        return
+    rfc822date = \
+        '%(wday)s, %(day)s %(month)s %(year)s %(hour)s:%(minute)s:%(second)s %(zonediff)s'\
+         % {
+        'wday': wday,
+        'day': m.group(2),
+        'month': month,
+        'year': m.group(4),
+        'hour': m.group(5),
+        'minute': m.group(6),
+        'second': m.group(7),
+        'zonediff': m.group(8),
+        }
+    if _debug:
+        sys.stderr.write('Greek date parsed as: %s\n' % rfc822date)
+    return _parse_date_rfc822(rfc822date)
+
+
+registerDateHandler(_parse_date_greek)
+
+# Unicode strings for Hungarian date strings
+
+_hungarian_months = {
+    u'janu\u00e1r': u'01',
+    u'febru\u00e1ri': u'02',
+    u'm\u00e1rcius': u'03',
+    u'\u00e1prilis': u'04',
+    u'm\u00e1ujus': u'05',
+    u'j\u00fanius': u'06',
+    u'j\u00falius': u'07',
+    u'augusztus': u'08',
+    u'szeptember': u'09',
+    u'okt\u00f3ber': u'10',
+    u'november': u'11',
+    u'december': u'12',
+    }
+
+_hungarian_date_format_re = \
+    re.compile(u'(\d{4})-([^-]+)-(\d{,2})T(\d{,2}):(\d{2})((\+|-)(\d{,2}:\d{2}))'
+               )
+
+
+def _parse_date_hungarian(dateString):
+    """Parse a string according to a Hungarian 8-bit date format."""
+
+    m = _hungarian_date_format_re.match(dateString)
+    if not m:
+        return
+    try:
+        month = _hungarian_months[m.group(2)]
+        day = m.group(3)
+        if len(day) == 1:
+            day = '0' + day
+        hour = m.group(4)
+        if len(hour) == 1:
+            hour = '0' + hour
+    except:
+        return
+    w3dtfdate = \
+        '%(year)s-%(month)s-%(day)sT%(hour)s:%(minute)s%(zonediff)s' % {
+        'year': m.group(1),
+        'month': month,
+        'day': day,
+        'hour': hour,
+        'minute': m.group(5),
+        'zonediff': m.group(6),
+        }
+    if _debug:
+        sys.stderr.write('Hungarian date parsed as: %s\n' % w3dtfdate)
+    return _parse_date_w3dtf(w3dtfdate)
+
+
+registerDateHandler(_parse_date_hungarian)
+
+# W3DTF-style date parsing adapted from PyXML xml.utils.iso8601, written by
+# Drake and licensed under the Python license.  Removed all range checking
+# for month, day, hour, minute, and second, since mktime will normalize
+# these later
+
+
+def _parse_date_w3dtf(dateString):
+
+    def __extract_date(m):
+        year = int(m.group('year'))
+        if year < 100:
+            year = 100 * int(time.gmtime()[0] / 100) + int(year)
+        if year < 1000:
+            return (0, 0, 0)
+        julian = m.group('julian')
+        if julian:
+            julian = int(julian)
+            month = julian / 30 + 1
+            day = julian % 30 + 1
+            jday = None
+            while jday != julian:
+                t = time.mktime((
+                    year,
+                    month,
+                    day,
+                    0,
+                    0,
+                    0,
+                    0,
+                    0,
+                    0,
+                    ))
+                jday = time.gmtime(t)[-2]
+                diff = abs(jday - julian)
+                if jday > julian:
+                    if diff < day:
+                        day = day - diff
+                    else:
+                        month = month - 1
+                        day = 31
+                elif jday < julian:
+                    if day + diff < 28:
+                        day = day + diff
+                    else:
+                        month = month + 1
+            return (year, month, day)
+        month = m.group('month')
+        day = 1
+        if month is None:
+            month = 1
+        else:
+            month = int(month)
+            day = m.group('day')
+            if day:
+                day = int(day)
+            else:
+                day = 1
+        return (year, month, day)
+
+    def __extract_time(m):
+        if not m:
+            return (0, 0, 0)
+        hours = m.group('hours')
+        if not hours:
+            return (0, 0, 0)
+        hours = int(hours)
+        minutes = int(m.group('minutes'))
+        seconds = m.group('seconds')
+        if seconds:
+            seconds = int(seconds)
+        else:
+            seconds = 0
+        return (hours, minutes, seconds)
+
+    def __extract_tzd(m):
+        """Return the Time Zone Designator as an offset in seconds from UTC."""
+
+        if not m:
+            return 0
+        tzd = m.group('tzd')
+        if not tzd:
+            return 0
+        if tzd == 'Z':
+            return 0
+        hours = int(m.group('tzdhours'))
+        minutes = m.group('tzdminutes')
+        if minutes:
+            minutes = int(minutes)
+        else:
+            minutes = 0
+        offset = (hours * 60 + minutes) * 60
+        if tzd[0] == '+':
+            return -offset
+        return offset
+
+    __date_re = \
+        '(?P\\d\\d\\d\\d)(?:(?P-|)(?:(?P\\d\\d\\d)|(?P\\d\\d)(?:(?P=dsep)(?P\\d\\d))?))?'
+
+    __tzd_re = \
+        '(?P[-+](?P\d\d)(?::?(?P\d\d))|Z)'
+    __tzd_rx = re.compile(__tzd_re)
+    __time_re = \
+        '(?P\\d\\d)(?P:|)(?P\\d\\d)(?:(?P=tsep)(?P\\d\\d(?:[.,]\\d+)?))?'\
+         + __tzd_re
+    __datetime_re = '%s(?:T%s)?' % (__date_re, __time_re)
+    __datetime_rx = re.compile(__datetime_re)
+    m = __datetime_rx.match(dateString)
+    if m is None or m.group() != dateString:
+        return
+    gmt = __extract_date(m) + __extract_time(m) + (0, 0, 0)
+    if gmt[0] == 0:
+        return
+    return time.gmtime((time.mktime(gmt) + __extract_tzd(m))
+                        - time.timezone)
+
+
+registerDateHandler(_parse_date_w3dtf)
+
+
+def _parse_date_rfc822(dateString):
+    """Parse an RFC822, RFC1123, RFC2822, or asctime-style date"""
+
+    data = dateString.split()
+    if data[0][-1] in (',', '.') or data[0].lower() in rfc822._daynames:
+        del data[0]
+    if len(data) == 4:
+        s = data[3]
+        i = s.find('+')
+        if i > 0:
+            data[3:] = [s[:i], s[i + 1:]]
+        else:
+            data.append('')
+        dateString = ' '.join(data)
+    if len(data) < 5:
+        dateString += ' 00:00:00 GMT'
+    tm = rfc822.parsedate_tz(dateString)
+    if tm:
+        return time.gmtime(rfc822.mktime_tz(tm))
+
+
+# rfc822.py defines several time zones, but we define some extra ones.
+# 'ET' is equivalent to 'EST', etc.
+
+_additional_timezones = {
+    'AT': -400,
+    'ET': -500,
+    'CT': -600,
+    'MT': -700,
+    'PT': -800,
+    }
+rfc822._timezones.update(_additional_timezones)
+registerDateHandler(_parse_date_rfc822)
+
+
+def _parse_date(dateString):
+    """Parses a variety of date formats into a 9-tuple in GMT"""
+
+    for handler in _date_handlers:
+        try:
+            date9tuple = handler(dateString)
+            if not date9tuple:
+                continue
+            if len(date9tuple) != 9:
+                if _debug:
+                    sys.stderr.write('date handler function must return 9-tuple\n'
+                            )
+                raise ValueError, 'date handler function must return 9-tuple'
+            map(int, date9tuple)
+            return date9tuple
+        except Exception, e:
+            if _debug:
+                sys.stderr.write('%s raised %s\n' % (handler.__name__,
+                                 repr(e)))
+            pass
+    return None
+
+
+def _getCharacterEncoding(http_headers, xml_data):
+    """Get the character encoding of the XML document
+
+    http_headers is a dictionary
+    xml_data is a raw string (not Unicode)
+
+    This is so much trickier than it sounds, it's not even funny.
+    According to RFC 3023 ('XML Media Types'), if the HTTP Content-Type
+    is application/xml, application/*+xml,
+    application/xml-external-parsed-entity, or application/xml-dtd,
+    the encoding given in the charset parameter of the HTTP Content-Type
+    takes precedence over the encoding given in the XML prefix within the
+    document, and defaults to 'utf-8' if neither are specified.  But, if
+    the HTTP Content-Type is text/xml, text/*+xml, or
+    text/xml-external-parsed-entity, the encoding given in the XML prefix
+    within the document is ALWAYS IGNORED and only the encoding given in
+    the charset parameter of the HTTP Content-Type header should be
+    respected, and it defaults to 'us-ascii' if not specified.
+
+    Furthermore, discussion on the atom-syntax mailing list with the
+    author of RFC 3023 leads me to the conclusion that any document
+    served with a Content-Type of text/* and no charset parameter
+    must be treated as us-ascii.  (We now do this.)  And also that it
+    must always be flagged as non-well-formed.  (We now do this too.)
+
+    If Content-Type is unspecified (input was local file or non-HTTP source)
+    or unrecognized (server just got it totally wrong), then go by the
+    encoding given in the XML prefix of the document and default to
+    'iso-8859-1' as per the HTTP specification (RFC 2616).
+
+    Then, assuming we didn't find a character encoding in the HTTP headers
+    (and the HTTP Content-type allowed us to look in the body), we need
+    to sniff the first few bytes of the XML data and try to determine
+    whether the encoding is ASCII-compatible.  Section F of the XML
+    specification shows the way here:
+    http://www.w3.org/TR/REC-xml/#sec-guessing-no-ext-info
+
+    If the sniffed encoding is not ASCII-compatible, we need to make it
+    ASCII compatible so that we can sniff further into the XML declaration
+    to find the encoding attribute, which will tell us the true encoding.
+
+    Of course, none of this guarantees that we will be able to parse the
+    feed in the declared character encoding (assuming it was declared
+    correctly, which many are not).  CJKCodecs and iconv_codec help a lot;
+    you should definitely install them if you can.
+    http://cjkpython.i18n.org/
+    """
+
+    def _parseHTTPContentType(content_type):
+        """takes HTTP Content-Type header and returns (content type, charset)
+
+        If no charset is specified, returns (content type, '')
+        If no content type is specified, returns ('', '')
+        Both return parameters are guaranteed to be lowercase strings
+        """
+
+        content_type = content_type or ''
+        (content_type, params) = cgi.parse_header(content_type)
+        return (content_type, params.get('charset', '').replace("'", ''
+                ))
+
+    sniffed_xml_encoding = ''
+    xml_encoding = ''
+    true_encoding = ''
+    (http_content_type, http_encoding) = \
+        _parseHTTPContentType(http_headers.get('content-type'))
+
+    # Must sniff for non-ASCII-compatible character encodings before
+    # searching for XML declaration.  This heuristic is defined in
+    # section F of the XML specification:
+    # http://www.w3.org/TR/REC-xml/#sec-guessing-no-ext-info
+
+    try:
+        if xml_data[:4] == '\x4c\x6f\xa7\x94':
+
+            # EBCDIC
+
+            xml_data = _ebcdic_to_ascii(xml_data)
+        elif xml_data[:4] == '\x00\x3c\x00\x3f':
+
+            # UTF-16BE
+
+            sniffed_xml_encoding = 'utf-16be'
+            xml_data = unicode(xml_data, 'utf-16be').encode('utf-8')
+        elif len(xml_data) >= 4 and xml_data[:2] == '\xfe\xff'\
+             and xml_data[2:4] != '\x00\x00':
+
+            # UTF-16BE with BOM
+
+            sniffed_xml_encoding = 'utf-16be'
+            xml_data = unicode(xml_data[2:], 'utf-16be').encode('utf-8')
+        elif xml_data[:4] == '\x3c\x00\x3f\x00':
+
+            # UTF-16LE
+
+            sniffed_xml_encoding = 'utf-16le'
+            xml_data = unicode(xml_data, 'utf-16le').encode('utf-8')
+        elif len(xml_data) >= 4 and xml_data[:2] == '\xff\xfe'\
+             and xml_data[2:4] != '\x00\x00':
+
+            # UTF-16LE with BOM
+
+            sniffed_xml_encoding = 'utf-16le'
+            xml_data = unicode(xml_data[2:], 'utf-16le').encode('utf-8')
+        elif xml_data[:4] == '\x00\x00\x00\x3c':
+
+            # UTF-32BE
+
+            sniffed_xml_encoding = 'utf-32be'
+            xml_data = unicode(xml_data, 'utf-32be').encode('utf-8')
+        elif xml_data[:4] == '\x3c\x00\x00\x00':
+
+            # UTF-32LE
+
+            sniffed_xml_encoding = 'utf-32le'
+            xml_data = unicode(xml_data, 'utf-32le').encode('utf-8')
+        elif xml_data[:4] == '\x00\x00\xfe\xff':
+
+            # UTF-32BE with BOM
+
+            sniffed_xml_encoding = 'utf-32be'
+            xml_data = unicode(xml_data[4:], 'utf-32be').encode('utf-8')
+        elif xml_data[:4] == '\xff\xfe\x00\x00':
+
+            # UTF-32LE with BOM
+
+            sniffed_xml_encoding = 'utf-32le'
+            xml_data = unicode(xml_data[4:], 'utf-32le').encode('utf-8')
+        elif xml_data[:3] == '\xef\xbb\xbf':
+
+            # UTF-8 with BOM
+
+            sniffed_xml_encoding = 'utf-8'
+            xml_data = unicode(xml_data[3:], 'utf-8').encode('utf-8')
+        else:
+
+            # ASCII-compatible
+
+            pass
+        xml_encoding_match = \
+            re.compile('^<\?.*encoding=[\'"](.*?)[\'"].*\?>'
+                       ).match(xml_data)
+    except:
+        xml_encoding_match = None
+    if xml_encoding_match:
+        xml_encoding = xml_encoding_match.groups()[0].lower()
+        if sniffed_xml_encoding and xml_encoding in (
+            'iso-10646-ucs-2',
+            'ucs-2',
+            'csunicode',
+            'iso-10646-ucs-4',
+            'ucs-4',
+            'csucs4',
+            'utf-16',
+            'utf-32',
+            'utf_16',
+            'utf_32',
+            'utf16',
+            'u16',
+            ):
+            xml_encoding = sniffed_xml_encoding
+    acceptable_content_type = 0
+    application_content_types = ('application/xml',
+                                 'application/xml-dtd',
+                                 'application/xml-external-parsed-entity'
+                                 )
+    text_content_types = ('text/xml', 'text/xml-external-parsed-entity')
+    if http_content_type in application_content_types\
+         or http_content_type.startswith('application/')\
+         and http_content_type.endswith('+xml'):
+        acceptable_content_type = 1
+        true_encoding = http_encoding or xml_encoding or 'utf-8'
+    elif http_content_type in text_content_types\
+         or http_content_type.startswith('text/')\
+         and http_content_type.endswith('+xml'):
+        acceptable_content_type = 1
+        true_encoding = http_encoding or 'us-ascii'
+    elif http_content_type.startswith('text/'):
+        true_encoding = http_encoding or 'us-ascii'
+    elif http_headers and not http_headers.has_key('content-type'):
+        true_encoding = xml_encoding or 'iso-8859-1'
+    else:
+        true_encoding = xml_encoding or 'utf-8'
+    return (true_encoding, http_encoding, xml_encoding,
+            sniffed_xml_encoding, acceptable_content_type)
+
+
+def _toUTF8(data, encoding):
+    """Changes an XML data stream on the fly to specify a new encoding
+
+    data is a raw sequence of bytes (not Unicode) that is presumed to be in %encoding already
+    encoding is a string recognized by encodings.aliases
+    """
+
+    if _debug:
+        sys.stderr.write('entering _toUTF8, trying encoding %s\n'
+                          % encoding)
+
+    # strip Byte Order Mark (if present)
+
+    if len(data) >= 4 and data[:2] == '\xfe\xff' and data[2:4]\
+         != '\x00\x00':
+        if _debug:
+            sys.stderr.write('stripping BOM\n')
+            if encoding != 'utf-16be':
+                sys.stderr.write('trying utf-16be instead\n')
+        encoding = 'utf-16be'
+        data = data[2:]
+    elif len(data) >= 4 and data[:2] == '\xff\xfe' and data[2:4]\
+         != '\x00\x00':
+        if _debug:
+            sys.stderr.write('stripping BOM\n')
+            if encoding != 'utf-16le':
+                sys.stderr.write('trying utf-16le instead\n')
+        encoding = 'utf-16le'
+        data = data[2:]
+    elif data[:3] == '\xef\xbb\xbf':
+        if _debug:
+            sys.stderr.write('stripping BOM\n')
+            if encoding != 'utf-8':
+                sys.stderr.write('trying utf-8 instead\n')
+        encoding = 'utf-8'
+        data = data[3:]
+    elif data[:4] == '\x00\x00\xfe\xff':
+        if _debug:
+            sys.stderr.write('stripping BOM\n')
+            if encoding != 'utf-32be':
+                sys.stderr.write('trying utf-32be instead\n')
+        encoding = 'utf-32be'
+        data = data[4:]
+    elif data[:4] == '\xff\xfe\x00\x00':
+        if _debug:
+            sys.stderr.write('stripping BOM\n')
+            if encoding != 'utf-32le':
+                sys.stderr.write('trying utf-32le instead\n')
+        encoding = 'utf-32le'
+        data = data[4:]
+    newdata = unicode(data, encoding)
+    if _debug:
+        sys.stderr.write('successfully converted %s data to unicode\n'
+                          % encoding)
+    declmatch = re.compile('^<\?xml[^>]*?>')
+    newdecl = ''''''
+    if declmatch.search(newdata):
+        newdata = declmatch.sub(newdecl, newdata)
+    else:
+        newdata = newdecl + u'\n' + newdata
+    return newdata.encode('utf-8')
+
+
+def _stripDoctype(data):
+    """Strips DOCTYPE from XML document, returns (rss_version, stripped_data)
+
+    rss_version may be 'rss091n' or None
+    stripped_data is the same XML document, minus the DOCTYPE
+    """
+
+    entity_pattern = re.compile(r']*?)>', re.MULTILINE)
+    data = entity_pattern.sub('', data)
+    doctype_pattern = re.compile(r']*?)>', re.MULTILINE)
+    doctype_results = doctype_pattern.findall(data)
+    doctype = doctype_results and doctype_results[0] or ''
+    if doctype.lower().count('netscape'):
+        version = 'rss091n'
+    else:
+        version = None
+    data = doctype_pattern.sub('', data)
+    return (version, data)
+
+
+def parse(
+    url_file_stream_or_string,
+    etag=None,
+    modified=None,
+    agent=None,
+    referrer=None,
+    handlers=[],
+    ):
+    """Parse a feed from a URL, file, stream, or string"""
+
+    result = FeedParserDict()
+    result['feed'] = FeedParserDict()
+    result['entries'] = []
+    if _XML_AVAILABLE:
+        result['bozo'] = 0
+    if type(handlers) == types.InstanceType:
+        handlers = [handlers]
+    try:
+        f = _open_resource(
+            url_file_stream_or_string,
+            etag,
+            modified,
+            agent,
+            referrer,
+            handlers,
+            )
+        data = f.read()
+    except Exception, e:
+        result['bozo'] = 1
+        result['bozo_exception'] = e
+        data = ''
+        f = None
+
+    # if feed is gzip-compressed, decompress it
+
+    if f and data and hasattr(f, 'headers'):
+        if gzip and f.headers.get('content-encoding', '') == 'gzip':
+            try:
+                data = gzip.GzipFile(fileobj=_StringIO(data)).read()
+            except Exception, e:
+
+                # Some feeds claim to be gzipped but they're not, so
+                # we get garbage.  Ideally, we should re-request the
+                # feed without the 'Accept-encoding: gzip' header,
+                # but we don't.
+
+                result['bozo'] = 1
+                result['bozo_exception'] = e
+                data = ''
+        elif zlib and f.headers.get('content-encoding', '')\
+             == 'deflate':
+            try:
+                data = zlib.decompress(data, -zlib.MAX_WBITS)
+            except Exception, e:
+                result['bozo'] = 1
+                result['bozo_exception'] = e
+                data = ''
+
+    # save HTTP headers
+
+    if hasattr(f, 'info'):
+        info = f.info()
+        result['etag'] = info.getheader('ETag')
+        last_modified = info.getheader('Last-Modified')
+        if last_modified:
+            result['modified'] = _parse_date(last_modified)
+    if hasattr(f, 'url'):
+        result['href'] = f.url
+        result['status'] = 200
+    if hasattr(f, 'status'):
+        result['status'] = f.status
+    if hasattr(f, 'headers'):
+        result['headers'] = f.headers.dict
+    if hasattr(f, 'close'):
+        f.close()
+
+    # there are four encodings to keep track of:
+    # - http_encoding is the encoding declared in the Content-Type HTTP header
+    # - xml_encoding is the encoding declared in the ; changed
+#  project name
+# 2.5 - 7/25/2003 - MAP - changed to Python license (all contributors agree);
+#  removed unnecessary urllib code -- urllib2 should always be available anyway;
+#  return actual url, status, and full HTTP headers (as result['url'],
+#  result['status'], and result['headers']) if parsing a remote feed over HTTP --
+#  this should pass all the HTTP tests at ;
+#  added the latest namespace-of-the-week for RSS 2.0
+# 2.5.1 - 7/26/2003 - RMK - clear opener.addheaders so we only send our custom
+#  User-Agent (otherwise urllib2 sends two, which confuses some servers)
+# 2.5.2 - 7/28/2003 - MAP - entity-decode inline xml properly; added support for
+#  inline  and  as used in some RSS 2.0 feeds
+# 2.5.3 - 8/6/2003 - TvdV - patch to track whether we're inside an image or
+#  textInput, and also to return the character encoding (if specified)
+# 2.6 - 1/1/2004 - MAP - dc:author support (MarekK); fixed bug tracking
+#  nested divs within content (JohnD); fixed missing sys import (JohanS);
+#  fixed regular expression to capture XML character encoding (Andrei);
+#  added support for Atom 0.3-style links; fixed bug with textInput tracking;
+#  added support for cloud (MartijnP); added support for multiple
+#  category/dc:subject (MartijnP); normalize content model: 'description' gets
+#  description (which can come from description, summary, or full content if no
+#  description), 'content' gets dict of base/language/type/value (which can come
+#  from content:encoded, xhtml:body, content, or fullitem);
+#  fixed bug matching arbitrary Userland namespaces; added xml:base and xml:lang
+#  tracking; fixed bug tracking unknown tags; fixed bug tracking content when
+#   element is not in default namespace (like Pocketsoap feed);
+#  resolve relative URLs in link, guid, docs, url, comments, wfw:comment,
+#  wfw:commentRSS; resolve relative URLs within embedded HTML markup in
+#  description, xhtml:body, content, content:encoded, title, subtitle,
+#  summary, info, tagline, and copyright; added support for pingback and
+#  trackback namespaces
+# 2.7 - 1/5/2004 - MAP - really added support for trackback and pingback
+#  namespaces, as opposed to 2.6 when I said I did but didn't really;
+#  sanitize HTML markup within some elements; added mxTidy support (if
+#  installed) to tidy HTML markup within some elements; fixed indentation
+#  bug in _parse_date (FazalM); use socket.setdefaulttimeout if available
+#  (FazalM); universal date parsing and normalization (FazalM): 'created', modified',
+#  'issued' are parsed into 9-tuple date format and stored in 'created_parsed',
+#  'modified_parsed', and 'issued_parsed'; 'date' is duplicated in 'modified'
+#  and vice-versa; 'date_parsed' is duplicated in 'modified_parsed' and vice-versa
+# 2.7.1 - 1/9/2004 - MAP - fixed bug handling " and '.  fixed memory
+#  leak not closing url opener (JohnD); added dc:publisher support (MarekK);
+#  added admin:errorReportsTo support (MarekK); Python 2.1 dict support (MarekK)
+# 2.7.4 - 1/14/2004 - MAP - added workaround for improperly formed 
     tags in
+#  encoded HTML (skadz); fixed unicode handling in normalize_attrs (ChrisL);
+#  fixed relative URI processing for guid (skadz); added ICBM support; added
+#  base64 support
+# 2.7.5 - 1/15/2004 - MAP - added workaround for malformed DOCTYPE (seen on many
+#  blogspot.com sites); added _debug variable
+# 2.7.6 - 1/16/2004 - MAP - fixed bug with StringIO importing
+# 3.0b3 - 1/23/2004 - MAP - parse entire feed with real XML parser (if available);
+#  added several new supported namespaces; fixed bug tracking naked markup in
+#  description; added support for enclosure; added support for source; re-added
+#  support for cloud which got dropped somehow; added support for expirationDate
+# 3.0b4 - 1/26/2004 - MAP - fixed xml:lang inheritance; fixed multiple bugs tracking
+#  xml:base URI, one for documents that don't define one explicitly and one for
+#  documents that define an outer and an inner xml:base that goes out of scope
+#  before the end of the document
+# 3.0b5 - 1/26/2004 - MAP - fixed bug parsing multiple links at feed level
+# 3.0b6 - 1/27/2004 - MAP - added feed type and version detection, result['version']
+#  will be one of SUPPORTED_VERSIONS.keys() or empty string if unrecognized;
+#  added support for creativeCommons:license and cc:license; added support for
+#  full Atom content model in title, tagline, info, copyright, summary; fixed bug
+#  with gzip encoding (not always telling server we support it when we do)
+# 3.0b7 - 1/28/2004 - MAP - support Atom-style author element in author_detail
+#  (dictionary of 'name', 'url', 'email'); map author to author_detail if author
+#  contains name + email address
+# 3.0b8 - 1/28/2004 - MAP - added support for contributor
+# 3.0b9 - 1/29/2004 - MAP - fixed check for presence of dict function; added
+#  support for summary
+# 3.0b10 - 1/31/2004 - MAP - incorporated ISO-8601 date parsing routines from
+#  xml.util.iso8601
+# 3.0b11 - 2/2/2004 - MAP - added 'rights' to list of elements that can contain
+#  dangerous markup; fiddled with decodeEntities (not right); liberalized
+#  date parsing even further
+# 3.0b12 - 2/6/2004 - MAP - fiddled with decodeEntities (still not right);
+#  added support to Atom 0.2 subtitle; added support for Atom content model
+#  in copyright; better sanitizing of dangerous HTML elements with end tags
+#  (script, frameset)
+# 3.0b13 - 2/8/2004 - MAP - better handling of empty HTML tags (br, hr, img,
+#  etc.) in embedded markup, in either HTML or XHTML form (
    , 
    , 
    )
+# 3.0b14 - 2/8/2004 - MAP - fixed CDATA handling in non-wellformed feeds under
+#  Python 2.1
+# 3.0b15 - 2/11/2004 - MAP - fixed bug resolving relative links in wfw:commentRSS;
+#  fixed bug capturing author and contributor URL; fixed bug resolving relative
+#  links in author and contributor URL; fixed bug resolvin relative links in
+#  generator URL; added support for recognizing RSS 1.0; passed Simon Fell's
+#  namespace tests, and included them permanently in the test suite with his
+#  permission; fixed namespace handling under Python 2.1
+# 3.0b16 - 2/12/2004 - MAP - fixed support for RSS 0.90 (broken in b15)
+# 3.0b17 - 2/13/2004 - MAP - determine character encoding as per RFC 3023
+# 3.0b18 - 2/17/2004 - MAP - always map description to summary_detail (Andrei);
+#  use libxml2 (if available)
+# 3.0b19 - 3/15/2004 - MAP - fixed bug exploding author information when author
+#  name was in parentheses; removed ultra-problematic mxTidy support; patch to
+#  workaround crash in PyXML/expat when encountering invalid entities
+#  (MarkMoraes); support for textinput/textInput
+# 3.0b20 - 4/7/2004 - MAP - added CDF support
+# 3.0b21 - 4/14/2004 - MAP - added Hot RSS support
+# 3.0b22 - 4/19/2004 - MAP - changed 'channel' to 'feed', 'item' to 'entries' in
+#  results dict; changed results dict to allow getting values with results.key
+#  as well as results[key]; work around embedded illformed HTML with half
+#  a DOCTYPE; work around malformed Content-Type header; if character encoding
+#  is wrong, try several common ones before falling back to regexes (if this
+#  works, bozo_exception is set to CharacterEncodingOverride); fixed character
+#  encoding issues in BaseHTMLProcessor by tracking encoding and converting
+#  from Unicode to raw strings before feeding data to sgmllib.SGMLParser;
+#  convert each value in results to Unicode (if possible), even if using
+#  regex-based parsing
+# 3.0b23 - 4/21/2004 - MAP - fixed UnicodeDecodeError for feeds that contain
+#  high-bit characters in attributes in embedded HTML in description (thanks
+#  Thijs van de Vossen); moved guid, date, and date_parsed to mapped keys in
+#  FeedParserDict; tweaked FeedParserDict.has_key to return True if asking
+#  about a mapped key
+# 3.0fc1 - 4/23/2004 - MAP - made results.entries[0].links[0] and
+#  results.entries[0].enclosures[0] into FeedParserDict; fixed typo that could
+#  cause the same encoding to be tried twice (even if it failed the first time);
+#  fixed DOCTYPE stripping when DOCTYPE contained entity declarations;
+#  better textinput and image tracking in illformed RSS 1.0 feeds
+# 3.0fc2 - 5/10/2004 - MAP - added and passed Sam's amp tests; added and passed
+#  my blink tag tests
+# 3.0fc3 - 6/18/2004 - MAP - fixed bug in _changeEncodingDeclaration that
+#  failed to parse utf-16 encoded feeds; made source into a FeedParserDict;
+#  duplicate admin:generatorAgent/@rdf:resource in generator_detail.url;
+#  added support for image; refactored parse() fallback logic to try other
+#  encodings if SAX parsing fails (previously it would only try other encodings
+#  if re-encoding failed); remove unichr madness in normalize_attrs now that
+#  we're properly tracking encoding in and out of BaseHTMLProcessor; set
+#  feed.language from root-level xml:lang; set entry.id from rdf:about;
+#  send Accept header
+# 3.0 - 6/21/2004 - MAP - don't try iso-8859-1 (can't distinguish between
+#  iso-8859-1 and windows-1252 anyway, and most incorrectly marked feeds are
+#  windows-1252); fixed regression that could cause the same encoding to be
+#  tried twice (even if it failed the first time)
+# 3.0.1 - 6/22/2004 - MAP - default to us-ascii for all text/* content types;
+#  recover from malformed content-type header parameter with no equals sign
+#  ('text/xml; charset:iso-8859-1')
+# 3.1 - 6/28/2004 - MAP - added and passed tests for converting HTML entities
+#  to Unicode equivalents in illformed feeds (aaronsw); added and
+#  passed tests for converting character entities to Unicode equivalents
+#  in illformed feeds (aaronsw); test for valid parsers when setting
+#  XML_AVAILABLE; make version and encoding available when server returns
+#  a 304; add handlers parameter to pass arbitrary urllib2 handlers (like
+#  digest auth or proxy support); add code to parse username/password
+#  out of url and send as basic authentication; expose downloading-related
+#  exceptions in bozo_exception (aaronsw); added __contains__ method to
+#  FeedParserDict (aaronsw); added publisher_detail (aaronsw)
+# 3.2 - 7/3/2004 - MAP - use cjkcodecs and iconv_codec if available; always
+#  convert feed to UTF-8 before passing to XML parser; completely revamped
+#  logic for determining character encoding and attempting XML parsing
+#  (much faster); increased default timeout to 20 seconds; test for presence
+#  of Location header on redirects; added tests for many alternate character
+#  encodings; support various EBCDIC encodings; support UTF-16BE and
+#  UTF16-LE with or without a BOM; support UTF-8 with a BOM; support
+#  UTF-32BE and UTF-32LE with or without a BOM; fixed crashing bug if no
+#  XML parsers are available; added support for 'Content-encoding: deflate';
+#  send blank 'Accept-encoding: ' header if neither gzip nor zlib modules
+#  are available
+# 3.3 - 7/15/2004 - MAP - optimize EBCDIC to ASCII conversion; fix obscure
+#  problem tracking xml:base and xml:lang if element declares it, child
+#  doesn't, first grandchild redeclares it, and second grandchild doesn't;
+#  refactored date parsing; defined public registerDateHandler so callers
+#  can add support for additional date formats at runtime; added support
+#  for OnBlog, Nate, MSSQL, Greek, and Hungarian dates (ytrewq1); added
+#  zopeCompatibilityHack() which turns FeedParserDict into a regular
+#  dictionary, required for Zope compatibility, and also makes command-
+#  line debugging easier because pprint module formats real dictionaries
+#  better than dictionary-like objects; added NonXMLContentType exception,
+#  which is stored in bozo_exception when a feed is served with a non-XML
+#  media type such as 'text/plain'; respect Content-Language as default
+#  language if not xml:lang is present; cloud dict is now FeedParserDict;
+#  generator dict is now FeedParserDict; better tracking of xml:lang,
+#  including support for xml:lang='' to unset the current language;
+#  recognize RSS 1.0 feeds even when RSS 1.0 namespace is not the default
+#  namespace; don't overwrite final status on redirects (scenarios:
+#  redirecting to a URL that returns 304, redirecting to a URL that
+#  redirects to another URL with a different type of redirect); add
+#  support for HTTP 303 redirects
+# 4.0 - MAP - support for relative URIs in xml:base attribute; fixed
+#  encoding issue with mxTidy (phopkins); preliminary support for RFC 3229;
+#  support for Atom 1.0; support for iTunes extensions; new 'tags' for
+#  categories/keywords/etc. as array of dict
+#  {'term': term, 'scheme': scheme, 'label': label} to match Atom 1.0
+#  terminology; parse RFC 822-style dates with no time; lots of other
+#  bug fixes
+# 4.1 - MAP - removed socket timeout; added support for chardet library
+

ADDED   gluon/contrib/gae_retry.py
Index: gluon/contrib/gae_retry.py
==================================================================
--- /dev/null
+++ gluon/contrib/gae_retry.py
@@ -0,0 +1,87 @@
+def autoretry_datastore_timeouts(attempts=5.0, interval=0.1, exponent=2.0):
+    """
+    Copyright (C)  2009  twitter.com/rcb
+
+    Permission is hereby granted, free of charge, to any person
+    obtaining a copy of this software and associated documentation
+    files (the "Software"), to deal in the Software without
+    restriction, including without limitation the rights to use,
+    copy, modify, merge, publish, distribute, sublicense, and/or sell
+    copies of the Software, and to permit persons to whom the
+    Software is furnished to do so, subject to the following
+    conditions:
+
+    The above copyright notice and this permission notice shall be
+    included in all copies or substantial portions of the Software.
+    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+    EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+    OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+    NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+    HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+    WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+    FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+    OTHER DEALINGS IN THE SOFTWARE.
+
+    ======================================================================
+
+    This function wraps the AppEngine Datastore API to autoretry
+    datastore timeouts at the lowest accessible level.
+
+    The benefits of this approach are:
+
+    1. Small Footprint:  Does not monkey with Model internals
+                         which may break in future releases.
+    2. Max Performance:  Retrying at this lowest level means
+                         serialization and key formatting is not
+                         needlessly repeated on each retry.
+    At initialization time, execute this:
+
+    >>> autoretry_datastore_timeouts()
+
+    Should only be called once, subsequent calls have no effect.
+
+    >>> autoretry_datastore_timeouts() # no effect
+
+    Default (5) attempts: .1, .2, .4, .8, 1.6 seconds
+
+    Parameters can each be specified as floats.
+
+    :param attempts: maximum number of times to retry.
+    :param interval: base seconds to sleep between retries.
+    :param exponent: rate of exponential back-off.
+    """
+
+    import time, logging
+    from google.appengine.api import apiproxy_stub_map
+    from google.appengine.runtime import apiproxy_errors
+    from google.appengine.datastore import datastore_pb
+
+    attempts = float(attempts)
+    interval = float(interval)
+    exponent = float(exponent)
+    wrapped = apiproxy_stub_map.MakeSyncCall
+    errors = {datastore_pb.Error.TIMEOUT:'Timeout',
+        datastore_pb.Error.CONCURRENT_TRANSACTION:'TransactionFailedError'}
+
+    def wrapper(*args, **kwargs):
+        count = 0.0
+        while True:
+            try:
+                return wrapped(*args, **kwargs)
+            except apiproxy_errors.ApplicationError, err:
+                errno = err.application_error
+                if errno not in errors: raise
+                sleep = (exponent ** count) * interval
+                count += 1.0
+                if count > attempts: raise
+                msg = "Datastore %s: retry #%d in %s seconds.\n%s"
+                vals = ''
+                if count == 1.0:
+                    vals = '\n'.join([str(a) for a in args])
+                logging.warning(msg % (errors[errno], count, sleep, vals))
+                time.sleep(sleep)
+
+    setattr(wrapper, '_autoretry_datastore_timeouts', False)
+    if getattr(wrapped, '_autoretry_datastore_timeouts', True):
+        apiproxy_stub_map.MakeSyncCall = wrapper
+

ADDED   gluon/contrib/gateways/__init__.py
Index: gluon/contrib/gateways/__init__.py
==================================================================
--- /dev/null
+++ gluon/contrib/gateways/__init__.py
@@ -0,0 +1,1 @@
+

ADDED   gluon/contrib/gateways/fcgi.py
Index: gluon/contrib/gateways/fcgi.py
==================================================================
--- /dev/null
+++ gluon/contrib/gateways/fcgi.py
@@ -0,0 +1,1331 @@
+# Copyright (c) 2002, 2003, 2005, 2006 Allan Saddi 
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+# SUCH DAMAGE.
+#
+# $Id$
+
+"""
+fcgi - a FastCGI/WSGI gateway.
+
+For more information about FastCGI, see .
+
+For more information about the Web Server Gateway Interface, see
+.
+
+Example usage:
+
+  #!/usr/bin/env python
+  from myapplication import app # Assume app is your WSGI application object
+  from fcgi import WSGIServer
+  WSGIServer(app).run()
+
+See the documentation for WSGIServer/Server for more information.
+
+On most platforms, fcgi will fallback to regular CGI behavior if run in a
+non-FastCGI context. If you want to force CGI behavior, set the environment
+variable FCGI_FORCE_CGI to "Y" or "y".
+"""
+
+__author__ = 'Allan Saddi '
+__version__ = '$Revision$'
+
+import sys
+import os
+import signal
+import struct
+import cStringIO as StringIO
+import select
+import socket
+import errno
+import traceback
+
+try:
+    import thread
+    import threading
+    thread_available = True
+except ImportError:
+    import dummy_thread as thread
+    import dummy_threading as threading
+    thread_available = False
+
+# Apparently 2.3 doesn't define SHUT_WR? Assume it is 1 in this case.
+if not hasattr(socket, 'SHUT_WR'):
+    socket.SHUT_WR = 1
+
+__all__ = ['WSGIServer']
+
+# Constants from the spec.
+FCGI_LISTENSOCK_FILENO = 0
+
+FCGI_HEADER_LEN = 8
+
+FCGI_VERSION_1 = 1
+
+FCGI_BEGIN_REQUEST = 1
+FCGI_ABORT_REQUEST = 2
+FCGI_END_REQUEST = 3
+FCGI_PARAMS = 4
+FCGI_STDIN = 5
+FCGI_STDOUT = 6
+FCGI_STDERR = 7
+FCGI_DATA = 8
+FCGI_GET_VALUES = 9
+FCGI_GET_VALUES_RESULT = 10
+FCGI_UNKNOWN_TYPE = 11
+FCGI_MAXTYPE = FCGI_UNKNOWN_TYPE
+
+FCGI_NULL_REQUEST_ID = 0
+
+FCGI_KEEP_CONN = 1
+
+FCGI_RESPONDER = 1
+FCGI_AUTHORIZER = 2
+FCGI_FILTER = 3
+
+FCGI_REQUEST_COMPLETE = 0
+FCGI_CANT_MPX_CONN = 1
+FCGI_OVERLOADED = 2
+FCGI_UNKNOWN_ROLE = 3
+
+FCGI_MAX_CONNS = 'FCGI_MAX_CONNS'
+FCGI_MAX_REQS = 'FCGI_MAX_REQS'
+FCGI_MPXS_CONNS = 'FCGI_MPXS_CONNS'
+
+FCGI_Header = '!BBHHBx'
+FCGI_BeginRequestBody = '!HB5x'
+FCGI_EndRequestBody = '!LB3x'
+FCGI_UnknownTypeBody = '!B7x'
+
+FCGI_EndRequestBody_LEN = struct.calcsize(FCGI_EndRequestBody)
+FCGI_UnknownTypeBody_LEN = struct.calcsize(FCGI_UnknownTypeBody)
+
+if __debug__:
+    import time
+
+    # Set non-zero to write debug output to a file.
+    DEBUG = 0
+    DEBUGLOG = '/tmp/fcgi.log'
+
+    def _debug(level, msg):
+        if DEBUG < level:
+            return
+
+        try:
+            f = open(DEBUGLOG, 'a')
+            f.write('%sfcgi: %s\n' % (time.ctime()[4:-4], msg))
+            f.close()
+        except:
+            pass
+
+class InputStream(object):
+    """
+    File-like object representing FastCGI input streams (FCGI_STDIN and
+    FCGI_DATA). Supports the minimum methods required by WSGI spec.
+    """
+    def __init__(self, conn):
+        self._conn = conn
+
+        # See Server.
+        self._shrinkThreshold = conn.server.inputStreamShrinkThreshold
+
+        self._buf = ''
+        self._bufList = []
+        self._pos = 0 # Current read position.
+        self._avail = 0 # Number of bytes currently available.
+
+        self._eof = False # True when server has sent EOF notification.
+
+    def _shrinkBuffer(self):
+        """Gets rid of already read data (since we can't rewind)."""
+        if self._pos >= self._shrinkThreshold:
+            self._buf = self._buf[self._pos:]
+            self._avail -= self._pos
+            self._pos = 0
+
+            assert self._avail >= 0
+
+    def _waitForData(self):
+        """Waits for more data to become available."""
+        self._conn.process_input()
+
+    def read(self, n=-1):
+        if self._pos == self._avail and self._eof:
+            return ''
+        while True:
+            if n < 0 or (self._avail - self._pos) < n:
+                # Not enough data available.
+                if self._eof:
+                    # And there's no more coming.
+                    newPos = self._avail
+                    break
+                else:
+                    # Wait for more data.
+                    self._waitForData()
+                    continue
+            else:
+                newPos = self._pos + n
+                break
+        # Merge buffer list, if necessary.
+        if self._bufList:
+            self._buf += ''.join(self._bufList)
+            self._bufList = []
+        r = self._buf[self._pos:newPos]
+        self._pos = newPos
+        self._shrinkBuffer()
+        return r
+
+    def readline(self, length=None):
+        if self._pos == self._avail and self._eof:
+            return ''
+        while True:
+            # Unfortunately, we need to merge the buffer list early.
+            if self._bufList:
+                self._buf += ''.join(self._bufList)
+                self._bufList = []
+            # Find newline.
+            i = self._buf.find('\n', self._pos)
+            if i < 0:
+                # Not found?
+                if self._eof:
+                    # No more data coming.
+                    newPos = self._avail
+                    break
+                else:
+                    # Wait for more to come.
+                    self._waitForData()
+                    continue
+            else:
+                newPos = i + 1
+                break
+        if length is not None:
+            if self._pos + length < newPos:
+                newPos = self._pos + length
+        r = self._buf[self._pos:newPos]
+        self._pos = newPos
+        self._shrinkBuffer()
+        return r
+
+    def readlines(self, sizehint=0):
+        total = 0
+        lines = []
+        line = self.readline()
+        while line:
+            lines.append(line)
+            total += len(line)
+            if 0 < sizehint <= total:
+                break
+            line = self.readline()
+        return lines
+
+    def __iter__(self):
+        return self
+
+    def next(self):
+        r = self.readline()
+        if not r:
+            raise StopIteration
+        return r
+
+    def add_data(self, data):
+        if not data:
+            self._eof = True
+        else:
+            self._bufList.append(data)
+            self._avail += len(data)
+
+class MultiplexedInputStream(InputStream):
+    """
+    A version of InputStream meant to be used with MultiplexedConnections.
+    Assumes the MultiplexedConnection (the producer) and the Request
+    (the consumer) are running in different threads.
+    """
+    def __init__(self, conn):
+        super(MultiplexedInputStream, self).__init__(conn)
+
+        # Arbitrates access to this InputStream (it's used simultaneously
+        # by a Request and its owning Connection object).
+        lock = threading.RLock()
+
+        # Notifies Request thread that there is new data available.
+        self._lock = threading.Condition(lock)
+
+    def _waitForData(self):
+        # Wait for notification from add_data().
+        self._lock.wait()
+
+    def read(self, n=-1):
+        self._lock.acquire()
+        try:
+            return super(MultiplexedInputStream, self).read(n)
+        finally:
+            self._lock.release()
+
+    def readline(self, length=None):
+        self._lock.acquire()
+        try:
+            return super(MultiplexedInputStream, self).readline(length)
+        finally:
+            self._lock.release()
+
+    def add_data(self, data):
+        self._lock.acquire()
+        try:
+            super(MultiplexedInputStream, self).add_data(data)
+            self._lock.notify()
+        finally:
+            self._lock.release()
+
+class OutputStream(object):
+    """
+    FastCGI output stream (FCGI_STDOUT/FCGI_STDERR). By default, calls to
+    write() or writelines() immediately result in Records being sent back
+    to the server. Buffering should be done in a higher level!
+    """
+    def __init__(self, conn, req, type, buffered=False):
+        self._conn = conn
+        self._req = req
+        self._type = type
+        self._buffered = buffered
+        self._bufList = [] # Used if buffered is True
+        self.dataWritten = False
+        self.closed = False
+
+    def _write(self, data):
+        length = len(data)
+        while length:
+            toWrite = min(length, self._req.server.maxwrite - FCGI_HEADER_LEN)
+
+            rec = Record(self._type, self._req.requestId)
+            rec.contentLength = toWrite
+            rec.contentData = data[:toWrite]
+            self._conn.writeRecord(rec)
+
+            data = data[toWrite:]
+            length -= toWrite
+
+    def write(self, data):
+        assert not self.closed
+
+        if not data:
+            return
+
+        self.dataWritten = True
+
+        if self._buffered:
+            self._bufList.append(data)
+        else:
+            self._write(data)
+
+    def writelines(self, lines):
+        assert not self.closed
+
+        for line in lines:
+            self.write(line)
+
+    def flush(self):
+        # Only need to flush if this OutputStream is actually buffered.
+        if self._buffered:
+            data = ''.join(self._bufList)
+            self._bufList = []
+            self._write(data)
+
+    # Though available, the following should NOT be called by WSGI apps.
+    def close(self):
+        """Sends end-of-stream notification, if necessary."""
+        if not self.closed and self.dataWritten:
+            self.flush()
+            rec = Record(self._type, self._req.requestId)
+            self._conn.writeRecord(rec)
+            self.closed = True
+
+class TeeOutputStream(object):
+    """
+    Simple wrapper around two or more output file-like objects that copies
+    written data to all streams.
+    """
+    def __init__(self, streamList):
+        self._streamList = streamList
+
+    def write(self, data):
+        for f in self._streamList:
+            f.write(data)
+
+    def writelines(self, lines):
+        for line in lines:
+            self.write(line)
+
+    def flush(self):
+        for f in self._streamList:
+            f.flush()
+
+class StdoutWrapper(object):
+    """
+    Wrapper for sys.stdout so we know if data has actually been written.
+    """
+    def __init__(self, stdout):
+        self._file = stdout
+        self.dataWritten = False
+
+    def write(self, data):
+        if data:
+            self.dataWritten = True
+        self._file.write(data)
+
+    def writelines(self, lines):
+        for line in lines:
+            self.write(line)
+
+    def __getattr__(self, name):
+        return getattr(self._file, name)
+
+def decode_pair(s, pos=0):
+    """
+    Decodes a name/value pair.
+
+    The number of bytes decoded as well as the name/value pair
+    are returned.
+    """
+    nameLength = ord(s[pos])
+    if nameLength & 128:
+        nameLength = struct.unpack('!L', s[pos:pos+4])[0] & 0x7fffffff
+        pos += 4
+    else:
+        pos += 1
+
+    valueLength = ord(s[pos])
+    if valueLength & 128:
+        valueLength = struct.unpack('!L', s[pos:pos+4])[0] & 0x7fffffff
+        pos += 4
+    else:
+        pos += 1
+
+    name = s[pos:pos+nameLength]
+    pos += nameLength
+    value = s[pos:pos+valueLength]
+    pos += valueLength
+
+    return (pos, (name, value))
+
+def encode_pair(name, value):
+    """
+    Encodes a name/value pair.
+
+    The encoded string is returned.
+    """
+    nameLength = len(name)
+    if nameLength < 128:
+        s = chr(nameLength)
+    else:
+        s = struct.pack('!L', nameLength | 0x80000000L)
+
+    valueLength = len(value)
+    if valueLength < 128:
+        s += chr(valueLength)
+    else:
+        s += struct.pack('!L', valueLength | 0x80000000L)
+
+    return s + name + value
+
+class Record(object):
+    """
+    A FastCGI Record.
+
+    Used for encoding/decoding records.
+    """
+    def __init__(self, type=FCGI_UNKNOWN_TYPE, requestId=FCGI_NULL_REQUEST_ID):
+        self.version = FCGI_VERSION_1
+        self.type = type
+        self.requestId = requestId
+        self.contentLength = 0
+        self.paddingLength = 0
+        self.contentData = ''
+
+    def _recvall(sock, length):
+        """
+        Attempts to receive length bytes from a socket, blocking if necessary.
+        (Socket may be blocking or non-blocking.)
+        """
+        dataList = []
+        recvLen = 0
+        while length:
+            try:
+                data = sock.recv(length)
+            except socket.error, e:
+                if e[0] == errno.EAGAIN:
+                    select.select([sock], [], [])
+                    continue
+                else:
+                    raise
+            if not data: # EOF
+                break
+            dataList.append(data)
+            dataLen = len(data)
+            recvLen += dataLen
+            length -= dataLen
+        return ''.join(dataList), recvLen
+    _recvall = staticmethod(_recvall)
+
+    def read(self, sock):
+        """Read and decode a Record from a socket."""
+        try:
+            header, length = self._recvall(sock, FCGI_HEADER_LEN)
+        except:
+            raise EOFError
+
+        if length < FCGI_HEADER_LEN:
+            raise EOFError
+
+        self.version, self.type, self.requestId, self.contentLength, \
+                      self.paddingLength = struct.unpack(FCGI_Header, header)
+
+        if __debug__: _debug(9, 'read: fd = %d, type = %d, requestId = %d, '
+                             'contentLength = %d' %
+                             (sock.fileno(), self.type, self.requestId,
+                              self.contentLength))
+
+        if self.contentLength:
+            try:
+                self.contentData, length = self._recvall(sock,
+                                                         self.contentLength)
+            except:
+                raise EOFError
+
+            if length < self.contentLength:
+                raise EOFError
+
+        if self.paddingLength:
+            try:
+                self._recvall(sock, self.paddingLength)
+            except:
+                raise EOFError
+
+    def _sendall(sock, data):
+        """
+        Writes data to a socket and does not return until all the data is sent.
+        """
+        length = len(data)
+        while length:
+            try:
+                sent = sock.send(data)
+            except socket.error, e:
+                if e[0] == errno.EAGAIN:
+                    select.select([], [sock], [])
+                    continue
+                else:
+                    raise
+            data = data[sent:]
+            length -= sent
+    _sendall = staticmethod(_sendall)
+
+    def write(self, sock):
+        """Encode and write a Record to a socket."""
+        self.paddingLength = -self.contentLength & 7
+
+        if __debug__: _debug(9, 'write: fd = %d, type = %d, requestId = %d, '
+                             'contentLength = %d' %
+                             (sock.fileno(), self.type, self.requestId,
+                              self.contentLength))
+
+        header = struct.pack(FCGI_Header, self.version, self.type,
+                             self.requestId, self.contentLength,
+                             self.paddingLength)
+        self._sendall(sock, header)
+        if self.contentLength:
+            self._sendall(sock, self.contentData)
+        if self.paddingLength:
+            self._sendall(sock, '\x00'*self.paddingLength)
+
+class Request(object):
+    """
+    Represents a single FastCGI request.
+
+    These objects are passed to your handler and is the main interface
+    between your handler and the fcgi module. The methods should not
+    be called by your handler. However, server, params, stdin, stdout,
+    stderr, and data are free for your handler's use.
+    """
+    def __init__(self, conn, inputStreamClass):
+        self._conn = conn
+
+        self.server = conn.server
+        self.params = {}
+        self.stdin = inputStreamClass(conn)
+        self.stdout = OutputStream(conn, self, FCGI_STDOUT)
+        self.stderr = OutputStream(conn, self, FCGI_STDERR, buffered=True)
+        self.data = inputStreamClass(conn)
+
+    def run(self):
+        """Runs the handler, flushes the streams, and ends the request."""
+        try:
+            protocolStatus, appStatus = self.server.handler(self)
+        except:
+            traceback.print_exc(file=self.stderr)
+            self.stderr.flush()
+            if not self.stdout.dataWritten:
+                self.server.error(self)
+
+            protocolStatus, appStatus = FCGI_REQUEST_COMPLETE, 0
+
+        if __debug__: _debug(1, 'protocolStatus = %d, appStatus = %d' %
+                             (protocolStatus, appStatus))
+
+        self._flush()
+        self._end(appStatus, protocolStatus)
+
+    def _end(self, appStatus=0L, protocolStatus=FCGI_REQUEST_COMPLETE):
+        self._conn.end_request(self, appStatus, protocolStatus)
+
+    def _flush(self):
+        self.stdout.close()
+        self.stderr.close()
+
+class CGIRequest(Request):
+    """A normal CGI request disguised as a FastCGI request."""
+    def __init__(self, server):
+        # These are normally filled in by Connection.
+        self.requestId = 1
+        self.role = FCGI_RESPONDER
+        self.flags = 0
+        self.aborted = False
+
+        self.server = server
+        self.params = dict(os.environ)
+        self.stdin = sys.stdin
+        self.stdout = StdoutWrapper(sys.stdout) # Oh, the humanity!
+        self.stderr = sys.stderr
+        self.data = StringIO.StringIO()
+
+    def _end(self, appStatus=0L, protocolStatus=FCGI_REQUEST_COMPLETE):
+        sys.exit(appStatus)
+
+    def _flush(self):
+        # Not buffered, do nothing.
+        pass
+
+class Connection(object):
+    """
+    A Connection with the web server.
+
+    Each Connection is associated with a single socket (which is
+    connected to the web server) and is responsible for handling all
+    the FastCGI message processing for that socket.
+    """
+    _multiplexed = False
+    _inputStreamClass = InputStream
+
+    def __init__(self, sock, addr, server):
+        self._sock = sock
+        self._addr = addr
+        self.server = server
+
+        # Active Requests for this Connection, mapped by request ID.
+        self._requests = {}
+
+    def _cleanupSocket(self):
+        """Close the Connection's socket."""
+        try:
+            self._sock.shutdown(socket.SHUT_WR)
+        except:
+            return
+        try:
+            while True:
+                r, w, e = select.select([self._sock], [], [])
+                if not r or not self._sock.recv(1024):
+                    break
+        except:
+            pass
+        self._sock.close()
+
+    def run(self):
+        """Begin processing data from the socket."""
+        self._keepGoing = True
+        while self._keepGoing:
+            try:
+                self.process_input()
+            except EOFError:
+                break
+            except (select.error, socket.error), e:
+                if e[0] == errno.EBADF: # Socket was closed by Request.
+                    break
+                raise
+
+        self._cleanupSocket()
+
+    def process_input(self):
+        """Attempt to read a single Record from the socket and process it."""
+        # Currently, any children Request threads notify this Connection
+        # that it is no longer needed by closing the Connection's socket.
+        # We need to put a timeout on select, otherwise we might get
+        # stuck in it indefinitely... (I don't like this solution.)
+        while self._keepGoing:
+            try:
+                r, w, e = select.select([self._sock], [], [], 1.0)
+            except ValueError:
+                # Sigh. ValueError gets thrown sometimes when passing select
+                # a closed socket.
+                raise EOFError
+            if r: break
+        if not self._keepGoing:
+            return
+        rec = Record()
+        rec.read(self._sock)
+
+        if rec.type == FCGI_GET_VALUES:
+            self._do_get_values(rec)
+        elif rec.type == FCGI_BEGIN_REQUEST:
+            self._do_begin_request(rec)
+        elif rec.type == FCGI_ABORT_REQUEST:
+            self._do_abort_request(rec)
+        elif rec.type == FCGI_PARAMS:
+            self._do_params(rec)
+        elif rec.type == FCGI_STDIN:
+            self._do_stdin(rec)
+        elif rec.type == FCGI_DATA:
+            self._do_data(rec)
+        elif rec.requestId == FCGI_NULL_REQUEST_ID:
+            self._do_unknown_type(rec)
+        else:
+            # Need to complain about this.
+            pass
+
+    def writeRecord(self, rec):
+        """
+        Write a Record to the socket.
+        """
+        rec.write(self._sock)
+
+    def end_request(self, req, appStatus=0L,
+                    protocolStatus=FCGI_REQUEST_COMPLETE, remove=True):
+        """
+        End a Request.
+
+        Called by Request objects. An FCGI_END_REQUEST Record is
+        sent to the web server. If the web server no longer requires
+        the connection, the socket is closed, thereby ending this
+        Connection (run() returns).
+        """
+        rec = Record(FCGI_END_REQUEST, req.requestId)
+        rec.contentData = struct.pack(FCGI_EndRequestBody, appStatus,
+                                      protocolStatus)
+        rec.contentLength = FCGI_EndRequestBody_LEN
+        self.writeRecord(rec)
+
+        if remove:
+            del self._requests[req.requestId]
+
+        if __debug__: _debug(2, 'end_request: flags = %d' % req.flags)
+
+        if not (req.flags & FCGI_KEEP_CONN) and not self._requests:
+            self._cleanupSocket()
+            self._keepGoing = False
+
+    def _do_get_values(self, inrec):
+        """Handle an FCGI_GET_VALUES request from the web server."""
+        outrec = Record(FCGI_GET_VALUES_RESULT)
+
+        pos = 0
+        while pos < inrec.contentLength:
+            pos, (name, value) = decode_pair(inrec.contentData, pos)
+            cap = self.server.capability.get(name)
+            if cap is not None:
+                outrec.contentData += encode_pair(name, str(cap))
+
+        outrec.contentLength = len(outrec.contentData)
+        self.writeRecord(outrec)
+
+    def _do_begin_request(self, inrec):
+        """Handle an FCGI_BEGIN_REQUEST from the web server."""
+        role, flags = struct.unpack(FCGI_BeginRequestBody, inrec.contentData)
+
+        req = self.server.request_class(self, self._inputStreamClass)
+        req.requestId, req.role, req.flags = inrec.requestId, role, flags
+        req.aborted = False
+
+        if not self._multiplexed and self._requests:
+            # Can't multiplex requests.
+            self.end_request(req, 0L, FCGI_CANT_MPX_CONN, remove=False)
+        else:
+            self._requests[inrec.requestId] = req
+
+    def _do_abort_request(self, inrec):
+        """
+        Handle an FCGI_ABORT_REQUEST from the web server.
+
+        We just mark a flag in the associated Request.
+        """
+        req = self._requests.get(inrec.requestId)
+        if req is not None:
+            req.aborted = True
+
+    def _start_request(self, req):
+        """Run the request."""
+        # Not multiplexed, so run it inline.
+        req.run()
+
+    def _do_params(self, inrec):
+        """
+        Handle an FCGI_PARAMS Record.
+
+        If the last FCGI_PARAMS Record is received, start the request.
+        """
+        req = self._requests.get(inrec.requestId)
+        if req is not None:
+            if inrec.contentLength:
+                pos = 0
+                while pos < inrec.contentLength:
+                    pos, (name, value) = decode_pair(inrec.contentData, pos)
+                    req.params[name] = value
+            else:
+                self._start_request(req)
+
+    def _do_stdin(self, inrec):
+        """Handle the FCGI_STDIN stream."""
+        req = self._requests.get(inrec.requestId)
+        if req is not None:
+            req.stdin.add_data(inrec.contentData)
+
+    def _do_data(self, inrec):
+        """Handle the FCGI_DATA stream."""
+        req = self._requests.get(inrec.requestId)
+        if req is not None:
+            req.data.add_data(inrec.contentData)
+
+    def _do_unknown_type(self, inrec):
+        """Handle an unknown request type. Respond accordingly."""
+        outrec = Record(FCGI_UNKNOWN_TYPE)
+        outrec.contentData = struct.pack(FCGI_UnknownTypeBody, inrec.type)
+        outrec.contentLength = FCGI_UnknownTypeBody_LEN
+        self.writeRecord(rec)
+
+class MultiplexedConnection(Connection):
+    """
+    A version of Connection capable of handling multiple requests
+    simultaneously.
+    """
+    _multiplexed = True
+    _inputStreamClass = MultiplexedInputStream
+
+    def __init__(self, sock, addr, server):
+        super(MultiplexedConnection, self).__init__(sock, addr, server)
+
+        # Used to arbitrate access to self._requests.
+        lock = threading.RLock()
+
+        # Notification is posted everytime a request completes, allowing us
+        # to quit cleanly.
+        self._lock = threading.Condition(lock)
+
+    def _cleanupSocket(self):
+        # Wait for any outstanding requests before closing the socket.
+        self._lock.acquire()
+        while self._requests:
+            self._lock.wait()
+        self._lock.release()
+
+        super(MultiplexedConnection, self)._cleanupSocket()
+
+    def writeRecord(self, rec):
+        # Must use locking to prevent intermingling of Records from different
+        # threads.
+        self._lock.acquire()
+        try:
+            # Probably faster than calling super. ;)
+            rec.write(self._sock)
+        finally:
+            self._lock.release()
+
+    def end_request(self, req, appStatus=0L,
+                    protocolStatus=FCGI_REQUEST_COMPLETE, remove=True):
+        self._lock.acquire()
+        try:
+            super(MultiplexedConnection, self).end_request(req, appStatus,
+                                                           protocolStatus,
+                                                           remove)
+            self._lock.notify()
+        finally:
+            self._lock.release()
+
+    def _do_begin_request(self, inrec):
+        self._lock.acquire()
+        try:
+            super(MultiplexedConnection, self)._do_begin_request(inrec)
+        finally:
+            self._lock.release()
+
+    def _do_abort_request(self, inrec):
+        self._lock.acquire()
+        try:
+            super(MultiplexedConnection, self)._do_abort_request(inrec)
+        finally:
+            self._lock.release()
+
+    def _start_request(self, req):
+        thread.start_new_thread(req.run, ())
+
+    def _do_params(self, inrec):
+        self._lock.acquire()
+        try:
+            super(MultiplexedConnection, self)._do_params(inrec)
+        finally:
+            self._lock.release()
+
+    def _do_stdin(self, inrec):
+        self._lock.acquire()
+        try:
+            super(MultiplexedConnection, self)._do_stdin(inrec)
+        finally:
+            self._lock.release()
+
+    def _do_data(self, inrec):
+        self._lock.acquire()
+        try:
+            super(MultiplexedConnection, self)._do_data(inrec)
+        finally:
+            self._lock.release()
+
+class Server(object):
+    """
+    The FastCGI server.
+
+    Waits for connections from the web server, processing each
+    request.
+
+    If run in a normal CGI context, it will instead instantiate a
+    CGIRequest and run the handler through there.
+    """
+    request_class = Request
+    cgirequest_class = CGIRequest
+
+    # Limits the size of the InputStream's string buffer to this size + the
+    # server's maximum Record size. Since the InputStream is not seekable,
+    # we throw away already-read data once this certain amount has been read.
+    inputStreamShrinkThreshold = 102400 - 8192
+
+    def __init__(self, handler=None, maxwrite=8192, bindAddress=None,
+                 umask=None, multiplexed=False):
+        """
+        handler, if present, must reference a function or method that
+        takes one argument: a Request object. If handler is not
+        specified at creation time, Server *must* be subclassed.
+        (The handler method below is abstract.)
+
+        maxwrite is the maximum number of bytes (per Record) to write
+        to the server. I've noticed mod_fastcgi has a relatively small
+        receive buffer (8K or so).
+
+        bindAddress, if present, must either be a string or a 2-tuple. If
+        present, run() will open its own listening socket. You would use
+        this if you wanted to run your application as an 'external' FastCGI
+        app. (i.e. the webserver would no longer be responsible for starting
+        your app) If a string, it will be interpreted as a filename and a UNIX
+        socket will be opened. If a tuple, the first element, a string,
+        is the interface name/IP to bind to, and the second element (an int)
+        is the port number.
+
+        Set multiplexed to True if you want to handle multiple requests
+        per connection. Some FastCGI backends (namely mod_fastcgi) don't
+        multiplex requests at all, so by default this is off (which saves
+        on thread creation/locking overhead). If threads aren't available,
+        this keyword is ignored; it's not possible to multiplex requests
+        at all.
+        """
+        if handler is not None:
+            self.handler = handler
+        self.maxwrite = maxwrite
+        if thread_available:
+            try:
+                import resource
+                # Attempt to glean the maximum number of connections
+                # from the OS.
+                maxConns = resource.getrlimit(resource.RLIMIT_NOFILE)[0]
+            except ImportError:
+                maxConns = 100 # Just some made up number.
+            maxReqs = maxConns
+            if multiplexed:
+                self._connectionClass = MultiplexedConnection
+                maxReqs *= 5 # Another made up number.
+            else:
+                self._connectionClass = Connection
+            self.capability = {
+                FCGI_MAX_CONNS: maxConns,
+                FCGI_MAX_REQS: maxReqs,
+                FCGI_MPXS_CONNS: multiplexed and 1 or 0
+                }
+        else:
+            self._connectionClass = Connection
+            self.capability = {
+                # If threads aren't available, these are pretty much correct.
+                FCGI_MAX_CONNS: 1,
+                FCGI_MAX_REQS: 1,
+                FCGI_MPXS_CONNS: 0
+                }
+        self._bindAddress = bindAddress
+        self._umask = umask
+
+    def _setupSocket(self):
+        if self._bindAddress is None: # Run as a normal FastCGI?
+            isFCGI = True
+
+            sock = socket.fromfd(FCGI_LISTENSOCK_FILENO, socket.AF_INET,
+                                 socket.SOCK_STREAM)
+            try:
+                sock.getpeername()
+            except socket.error, e:
+                if e[0] == errno.ENOTSOCK:
+                    # Not a socket, assume CGI context.
+                    isFCGI = False
+                elif e[0] != errno.ENOTCONN:
+                    raise
+
+            # FastCGI/CGI discrimination is broken on Mac OS X.
+            # Set the environment variable FCGI_FORCE_CGI to "Y" or "y"
+            # if you want to run your app as a simple CGI. (You can do
+            # this with Apache's mod_env [not loaded by default in OS X
+            # client, ha ha] and the SetEnv directive.)
+            if not isFCGI or \
+               os.environ.get('FCGI_FORCE_CGI', 'N').upper().startswith('Y'):
+                req = self.cgirequest_class(self)
+                req.run()
+                sys.exit(0)
+        else:
+            # Run as a server
+            oldUmask = None
+            if type(self._bindAddress) is str:
+                # Unix socket
+                sock = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
+                try:
+                    os.unlink(self._bindAddress)
+                except OSError:
+                    pass
+                if self._umask is not None:
+                    oldUmask = os.umask(self._umask)
+            else:
+                # INET socket
+                assert type(self._bindAddress) is tuple
+                assert len(self._bindAddress) == 2
+                sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+                sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
+
+            sock.bind(self._bindAddress)
+            sock.listen(socket.SOMAXCONN)
+
+            if oldUmask is not None:
+                os.umask(oldUmask)
+
+        return sock
+
+    def _cleanupSocket(self, sock):
+        """Closes the main socket."""
+        sock.close()
+
+    def _installSignalHandlers(self):
+        self._oldSIGs = [(x,signal.getsignal(x)) for x in
+                         (signal.SIGHUP, signal.SIGINT, signal.SIGTERM)]
+        signal.signal(signal.SIGHUP, self._hupHandler)
+        signal.signal(signal.SIGINT, self._intHandler)
+        signal.signal(signal.SIGTERM, self._intHandler)
+
+    def _restoreSignalHandlers(self):
+        for signum,handler in self._oldSIGs:
+            signal.signal(signum, handler)
+
+    def _hupHandler(self, signum, frame):
+        self._hupReceived = True
+        self._keepGoing = False
+
+    def _intHandler(self, signum, frame):
+        self._keepGoing = False
+
+    def run(self, timeout=1.0):
+        """
+        The main loop. Exits on SIGHUP, SIGINT, SIGTERM. Returns True if
+        SIGHUP was received, False otherwise.
+        """
+        web_server_addrs = os.environ.get('FCGI_WEB_SERVER_ADDRS')
+        if web_server_addrs is not None:
+            web_server_addrs = map(lambda x: x.strip(),
+                                   web_server_addrs.split(','))
+
+        sock = self._setupSocket()
+
+        self._keepGoing = True
+        self._hupReceived = False
+
+        # Install signal handlers.
+        self._installSignalHandlers()
+
+        while self._keepGoing:
+            try:
+                r, w, e = select.select([sock], [], [], timeout)
+            except select.error, e:
+                if e[0] == errno.EINTR:
+                    continue
+                raise
+
+            if r:
+                try:
+                    clientSock, addr = sock.accept()
+                except socket.error, e:
+                    if e[0] in (errno.EINTR, errno.EAGAIN):
+                        continue
+                    raise
+
+                if web_server_addrs and \
+                       (len(addr) != 2 or addr[0] not in web_server_addrs):
+                    clientSock.close()
+                    continue
+
+                # Instantiate a new Connection and begin processing FastCGI
+                # messages (either in a new thread or this thread).
+                conn = self._connectionClass(clientSock, addr, self)
+                thread.start_new_thread(conn.run, ())
+
+            self._mainloopPeriodic()
+
+        # Restore signal handlers.
+        self._restoreSignalHandlers()
+
+        self._cleanupSocket(sock)
+
+        return self._hupReceived
+
+    def _mainloopPeriodic(self):
+        """
+        Called with just about each iteration of the main loop. Meant to
+        be overridden.
+        """
+        pass
+
+    def _exit(self, reload=False):
+        """
+        Protected convenience method for subclasses to force an exit. Not
+        really thread-safe, which is why it isn't public.
+        """
+        if self._keepGoing:
+            self._keepGoing = False
+            self._hupReceived = reload
+
+    def handler(self, req):
+        """
+        Default handler, which just raises an exception. Unless a handler
+        is passed at initialization time, this must be implemented by
+        a subclass.
+        """
+        raise NotImplementedError, self.__class__.__name__ + '.handler'
+
+    def error(self, req):
+        """
+        Called by Request if an exception occurs within the handler. May and
+        should be overridden.
+        """
+        import cgitb
+        req.stdout.write('Content-Type: text/html\r\n\r\n' +
+                         cgitb.html(sys.exc_info()))
+
+class WSGIServer(Server):
+    """
+    FastCGI server that supports the Web Server Gateway Interface. See
+    .
+    """
+    def __init__(self, application, environ=None,
+                 multithreaded=True, **kw):
+        """
+        environ, if present, must be a dictionary-like object. Its
+        contents will be copied into application's environ. Useful
+        for passing application-specific variables.
+
+        Set multithreaded to False if your application is not MT-safe.
+        """
+        if kw.has_key('handler'):
+            del kw['handler'] # Doesn't make sense to let this through
+        super(WSGIServer, self).__init__(**kw)
+
+        if environ is None:
+            environ = {}
+
+        self.application = application
+        self.environ = environ
+        self.multithreaded = multithreaded
+
+        # Used to force single-threadedness
+        self._app_lock = thread.allocate_lock()
+
+    def handler(self, req):
+        """Special handler for WSGI."""
+        if req.role != FCGI_RESPONDER:
+            return FCGI_UNKNOWN_ROLE, 0
+
+        # Mostly taken from example CGI gateway.
+        environ = req.params
+        environ.update(self.environ)
+
+        environ['wsgi.version'] = (1,0)
+        environ['wsgi.input'] = req.stdin
+        if self._bindAddress is None:
+            stderr = req.stderr
+        else:
+            stderr = TeeOutputStream((sys.stderr, req.stderr))
+        environ['wsgi.errors'] = stderr
+        environ['wsgi.multithread'] = not isinstance(req, CGIRequest) and \
+                                      thread_available and self.multithreaded
+        # Rationale for the following: If started by the web server
+        # (self._bindAddress is None) in either FastCGI or CGI mode, the
+        # possibility of being spawned multiple times simultaneously is quite
+        # real. And, if started as an external server, multiple copies may be
+        # spawned for load-balancing/redundancy. (Though I don't think
+        # mod_fastcgi supports this?)
+        environ['wsgi.multiprocess'] = True
+        environ['wsgi.run_once'] = isinstance(req, CGIRequest)
+
+        if environ.get('HTTPS', 'off') in ('on', '1'):
+            environ['wsgi.url_scheme'] = 'https'
+        else:
+            environ['wsgi.url_scheme'] = 'http'
+
+        self._sanitizeEnv(environ)
+
+        headers_set = []
+        headers_sent = []
+        result = None
+
+        def write(data):
+            assert type(data) is str, 'write() argument must be string'
+            assert headers_set, 'write() before start_response()'
+
+            if not headers_sent:
+                status, responseHeaders = headers_sent[:] = headers_set
+                found = False
+                for header,value in responseHeaders:
+                    if header.lower() == 'content-length':
+                        found = True
+                        break
+                if not found and result is not None:
+                    try:
+                        if len(result) == 1:
+                            responseHeaders.append(('Content-Length',
+                                                    str(len(data))))
+                    except:
+                        pass
+                s = 'Status: %s\r\n' % status
+                for header in responseHeaders:
+                    s += '%s: %s\r\n' % header
+                s += '\r\n'
+                req.stdout.write(s)
+
+            req.stdout.write(data)
+            req.stdout.flush()
+
+        def start_response(status, response_headers, exc_info=None):
+            if exc_info:
+                try:
+                    if headers_sent:
+                        # Re-raise if too late
+                        raise exc_info[0], exc_info[1], exc_info[2]
+                finally:
+                    exc_info = None # avoid dangling circular ref
+            else:
+                assert not headers_set, 'Headers already set!'
+
+            assert type(status) is str, 'Status must be a string'
+            assert len(status) >= 4, 'Status must be at least 4 characters'
+            assert int(status[:3]), 'Status must begin with 3-digit code'
+            assert status[3] == ' ', 'Status must have a space after code'
+            assert type(response_headers) is list, 'Headers must be a list'
+            if __debug__:
+                for name,val in response_headers:
+                    assert type(name) is str, 'Header names must be strings'
+                    assert type(val) is str, 'Header values must be strings'
+
+            headers_set[:] = [status, response_headers]
+            return write
+
+        if not self.multithreaded:
+            self._app_lock.acquire()
+        try:
+            try:
+                result = self.application(environ, start_response)
+                try:
+                    for data in result:
+                        if data:
+                            write(data)
+                    if not headers_sent:
+                        write('') # in case body was empty
+                finally:
+                    if hasattr(result, 'close'):
+                        result.close()
+            except socket.error, e:
+                if e[0] != errno.EPIPE:
+                    raise # Don't let EPIPE propagate beyond server
+        finally:
+            if not self.multithreaded:
+                self._app_lock.release()
+
+        return FCGI_REQUEST_COMPLETE, 0
+
+    def _sanitizeEnv(self, environ):
+        """Ensure certain values are present, if required by WSGI."""
+        if not environ.has_key('SCRIPT_NAME'):
+            environ['SCRIPT_NAME'] = ''
+        if not environ.has_key('PATH_INFO'):
+            environ['PATH_INFO'] = ''
+
+        # If any of these are missing, it probably signifies a broken
+        # server...
+        for name,default in [('REQUEST_METHOD', 'GET'),
+                             ('SERVER_NAME', 'localhost'),
+                             ('SERVER_PORT', '80'),
+                             ('SERVER_PROTOCOL', 'HTTP/1.0')]:
+            if not environ.has_key(name):
+                environ['wsgi.errors'].write('%s: missing FastCGI param %s '
+                                             'required by WSGI!\n' %
+                                             (self.__class__.__name__, name))
+                environ[name] = default
+
+if __name__ == '__main__':
+    def test_app(environ, start_response):
+        """Probably not the most efficient example."""
+        import cgi
+        start_response('200 OK', [('Content-Type', 'text/html')])
+        yield 'Hello World!\n' \
+              '\n' \
+              '
    Hello World!
    \n' \
+              '
    '
+        names = environ.keys()
+        names.sort()
+        for name in names:
+            yield '\n' % (
+                name, cgi.escape(`environ[name]`))
+
+        form = cgi.FieldStorage(fp=environ['wsgi.input'], environ=environ,
+                                keep_blank_values=1)
+        if form.list:
+            yield ''
+
+        for field in form.list:
+            yield '\n' % (
+                field.name, field.value)
+
+        yield '
    %s%s
    Form data
    %s%s
    \n' \
+              '\n'
+
+    WSGIServer(test_app).run()

ADDED   gluon/contrib/generics.py
Index: gluon/contrib/generics.py
==================================================================
--- /dev/null
+++ gluon/contrib/generics.py
@@ -0,0 +1,64 @@
+# fix response
+
+import re
+import os
+import cPickle
+import gluon.serializers
+from gluon import current
+from gluon.html import markmin_serializer, TAG, HTML, BODY, UL, XML
+from gluon.contenttype import contenttype
+from gluon.contrib.pyfpdf import FPDF, HTMLMixin
+from gluon.sanitizer import sanitize
+from gluon.contrib.markmin.markmin2latex import markmin2latex
+from gluon.contrib.markmin.markmin2pdf import markmin2pdf
+
+def wrapper(f):
+    def g(data):
+        try:
+            output = f(data)
+        except (TypeError, ValueError):
+            raise HTTP(405, '%s serialization error' % extension.upper())
+        except ImportError:
+            raise HTTP(405, '%s not available' % extension.upper())
+        except:
+            raise HTTP(405, '%s error' % extension.upper())
+        return XML(ouput)
+    return g
+
+def latex_from_html(html):
+    markmin=TAG(html).element('body').flatten(markmin_serializer)
+    return XML(markmin2latex(markmin))
+
+def pdflatex_from_html(html):
+    if os.system('which pdflatex > /dev/null')==0:
+        markmin=TAG(html).element('body').flatten(markmin_serializer)
+        out,warning,errors=markmin2pdf(markmin)
+        if errors:
+            current.response.headers['Content-Type']='text/html'
+            raise HTTP(405,HTML(BODY(H1('errors'),
+                                     LU(*errors),
+                                     H1('warnings'),
+                                     LU(*warnings))).xml())
+        else:
+            return XML(out)
+
+def pyfpdf_from_html(html):
+    request = current.request
+    def image_map(path):
+        if path.startswith('/%s/static/' % request.application):
+            return os.path.join(request.folder,path.split('/',2)[2])
+        return 'http%s://%s%s' % (request.is_https and 's' or '',request.env.http_host, path)
+    class MyFPDF(FPDF, HTMLMixin): pass
+    pdf=MyFPDF()
+    pdf.add_page()
+    html = sanitize(html, escape=False)  #### should have better list of allowed tags
+    pdf.write_html(html,image_map=image_map)
+    return XML(pdf.output(dest='S'))
+
+def pdf_from_html(html):
+    # try use latex and pdflatex
+    if os.system('which pdflatex > /dev/null')==0:
+        return pdflatex_from_html(html)
+    else:
+        return pyfpdf_from_html(html)
+

ADDED   gluon/contrib/gql.py
Index: gluon/contrib/gql.py
==================================================================
--- /dev/null
+++ gluon/contrib/gql.py
@@ -0,0 +1,6 @@
+# this file exists for backward compatibility
+
+__all__ = ['DAL','Field','drivers','gae']
+
+from gluon.dal import DAL, Field, Table, Query, Set, Expression, Row, Rows, drivers, BaseAdapter, SQLField, SQLTable, SQLXorable, SQLQuery, SQLSet, SQLRows, SQLStorage, SQLDB, GQLDB, SQLALL, SQLCustomType, gae
+

ADDED   gluon/contrib/login_methods/__init__.py
Index: gluon/contrib/login_methods/__init__.py
==================================================================
--- /dev/null
+++ gluon/contrib/login_methods/__init__.py
@@ -0,0 +1,1 @@
+

ADDED   gluon/contrib/login_methods/basic_auth.py
Index: gluon/contrib/login_methods/basic_auth.py
==================================================================
--- /dev/null
+++ gluon/contrib/login_methods/basic_auth.py
@@ -0,0 +1,24 @@
+import urllib
+import urllib2
+import base64
+
+
+def basic_auth(server="http://127.0.0.1"):
+    """
+    to use basic login with a different server
+    from gluon.contrib.login_methods.basic_auth import basic_auth
+    auth.settings.login_methods.append(basic_auth('http://server'))
+    """
+
+    def basic_login_aux(username,
+            password,
+            server=server):
+        key = base64.b64encode(username+':'+password)
+        headers = {'Authorization': 'Basic ' + key}
+        request = urllib2.Request(server, None, headers)
+        try:
+            urllib2.urlopen(request)
+            return True
+        except (urllib2.URLError, urllib2.HTTPError):
+            return False
+    return basic_login_aux

ADDED   gluon/contrib/login_methods/cas_auth.py
Index: gluon/contrib/login_methods/cas_auth.py
==================================================================
--- /dev/null
+++ gluon/contrib/login_methods/cas_auth.py
@@ -0,0 +1,131 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of web2py Web Framework (Copyrighted, 2007-2009).
+Developed by Massimo Di Pierro .
+License: GPL v2
+
+Tinkered by Szabolcs Gyuris < szimszo n @ o regpreshaz dot eu>
+"""
+
+from gluon import current, redirect
+
+class CasAuth( object ):
+    """
+    Login will be done via Web2py's CAS application, instead of web2py's
+    login form.
+
+    Include in your model (eg db.py)::
+
+        from gluon.contrib.login_methods.cas_auth import CasAuth
+        auth.define_tables(username=True)
+        auth.settings.login_form=CasAuth(
+            urlbase = "https://[your CAS provider]/app/default/user/cas",
+                       actions=['login','validate','logout'])
+
+    where urlbase is the actual CAS server url without the login,logout...
+    Enjoy.
+
+    ###UPDATE###
+    if you want to connect to a CAS version 2 JASIG Server use this:
+        auth.settings.login_form=CasAuth(
+            urlbase = "https://[Your CAS server]/cas",
+            actions = ['login','serviceValidate','logout'],
+            casversion = 2,
+            casusername = "cas:user")
+
+    where casusername is the xml node returned by CAS server which contains
+    user's username.
+
+    """
+    def __init__(self, g=None, ### g for backward compatibility ###
+                 urlbase = "https://web2py.com/cas/cas",
+                 actions=['login','check','logout'],
+                 maps=dict(username=lambda v:v.get('username',v['user']),
+                           email=lambda v:v.get('email',None),
+                           user_id=lambda v:v['user']),
+                 casversion = 1,
+                 casusername = 'cas:user'
+                 ):
+        self.urlbase=urlbase
+        self.cas_login_url="%s/%s"%(self.urlbase,actions[0])
+        self.cas_check_url="%s/%s"%(self.urlbase,actions[1])
+        self.cas_logout_url="%s/%s"%(self.urlbase,actions[2])
+        self.maps=maps
+        self.casversion = casversion
+        self.casusername = casusername
+        http_host=current.request.env.http_x_forwarded_host
+        if not http_host: http_host=current.request.env.http_host
+        if current.request.env.wsgi_url_scheme in [ 'https', 'HTTPS' ]: 
+            scheme = 'https' 
+        else: 
+            scheme = 'http' 
+        self.cas_my_url='%s://%s%s'%( scheme, http_host, current.request.env.path_info ) 
+    
+    def login_url( self, next = "/" ):
+        current.session.token=self._CAS_login()
+        return next
+    def logout_url( self, next = "/" ):
+        current.session.token=None
+        current.session.auth=None
+        self._CAS_logout()
+        return next
+    def get_user( self ):
+        user=current.session.token
+        if user:
+            d = {'source':'web2py cas'}
+            for key in self.maps:
+                d[key]=self.maps[key](user)
+            return d
+        return None
+    def _CAS_login( self ):
+        """
+        exposed as CAS.login(request)
+        returns a token on success, None on failed authentication
+        """
+        import urllib
+        self.ticket=current.request.vars.ticket
+        if not current.request.vars.ticket:
+            redirect( "%s?service=%s"% (self.cas_login_url,
+                                        self.cas_my_url))
+        else:
+            url="%s?service=%s&ticket=%s" % (self.cas_check_url,
+                                             self.cas_my_url,
+                                             self.ticket )
+            data=urllib.urlopen( url ).read()
+            if data.startswith('yes') or data.startswith('no'):
+                data = data.split('\n')
+                if data[0]=='yes':
+                    a,b,c = data[1].split( ':' )+[None,None]
+                    return dict(user=a,email=b,username=c)
+                return None
+            import xml.dom.minidom as dom
+            import xml.parsers.expat as expat
+            try:
+                dxml=dom.parseString(data)
+                envelop = dxml.getElementsByTagName("cas:authenticationSuccess")
+                if len(envelop)>0:
+                    res = dict()
+                    for x in envelop[0].childNodes:
+                        if x.nodeName.startswith('cas:') and len(x.childNodes):
+                            key = x.nodeName[4:].encode('utf8')
+                            value = x.childNodes[0].nodeValue.encode('utf8')
+                            if not key in res:
+                                res[key]=value
+                            else:
+                                if not isinstance(res[key],list):
+                                    res[key]=[res[key]]
+                                res[key].append(value)
+                    return res
+            except expat.ExpatError: pass
+            return None # fallback
+
+
+    def _CAS_logout( self ):
+        """
+        exposed CAS.logout()
+        redirects to the CAS logout page
+        """
+        import urllib
+        redirect("%s?service=%s" % (self.cas_logout_url,self.cas_my_url))

ADDED   gluon/contrib/login_methods/email_auth.py
Index: gluon/contrib/login_methods/email_auth.py
==================================================================
--- /dev/null
+++ gluon/contrib/login_methods/email_auth.py
@@ -0,0 +1,36 @@
+import smtplib
+
+
+def email_auth(server="smtp.gmail.com:587",
+               domain="@gmail.com"):
+    """
+    to use email_login:
+    from gluon.contrib.login_methods.email_auth import email_auth
+    auth.settings.login_methods.append(email_auth("smtp.gmail.com:587",
+                                                  "@gmail.com"))
+    """
+
+    def email_auth_aux(email,
+                       password,
+                       server=server,
+                       domain=domain):
+        if domain:
+            if not isinstance(domain,(list,tuple)):
+                domain=[str(domain)]
+            if not [d for d in domain if email[-len(d):]==d]:
+                return False
+        (host, port) = server.split(':')
+        try:
+            server = None
+            server = smtplib.SMTP(host, port)
+            server.ehlo()
+            server.starttls()
+            server.ehlo()
+            server.login(email, password)
+            server.quit()
+            return True
+        except:
+            if server:
+                server.quit()
+            return False
+    return email_auth_aux

ADDED   gluon/contrib/login_methods/extended_login_form.py
Index: gluon/contrib/login_methods/extended_login_form.py
==================================================================
--- /dev/null
+++ gluon/contrib/login_methods/extended_login_form.py
@@ -0,0 +1,102 @@
+#!/usr/bin/env python
+# coding: utf8
+
+"""
+ExtendedLoginForm is used to extend normal login form in web2py with one more login method.
+So user can choose the built-in login or extended login methods.
+"""
+
+from gluon.html import DIV
+
+class ExtendedLoginForm(object):
+    """
+    Put extended_login_form under web2py/gluon/contrib/login_methods folder.
+    Then inside your model where defines the auth:
+
+    auth = Auth(globals(),db)              # authentication/authorization
+    ...
+    auth.define_tables()                   # You might like to put the code after auth.define_tables
+    ...                                    # if the alt_login_form deals with tables of auth.
+
+    alt_login_form = RPXAccount(request,
+                                api_key="...",
+                                domain="...",
+                                url = "http://localhost:8000/%s/default/user/login" % request.application)
+    extended_login_form = ExtendedLoginForm(auth, alt_login_form, signals=['token'])
+
+    auth.settings.login_form = extended_login_form
+
+    Note:
+        Since rpx_account doesn't create the password for the user, you
+        might need to provide a way for user to create password to do
+        normal login.
+
+    """
+
+    def __init__(self,
+                 auth,
+                 alt_login_form,
+                 signals=[],
+                 login_arg = 'login'
+                 ):
+        self.auth = auth
+        self.alt_login_form = alt_login_form
+        self.signals = signals
+        self.login_arg = login_arg
+
+    def get_user(self):
+        """
+        Delegate the get_user to alt_login_form.get_user.
+        """
+        if hasattr(self.alt_login_form, 'get_user'):
+            return self.alt_login_form.get_user()
+        return None # let gluon.tools.Auth.get_or_create_user do the rest
+
+    def login_url(self, next):
+        """
+        Optional implement for alt_login_form.
+
+        In normal case, this should be replaced by get_user, and never get called.
+        """
+        if hasattr(self.alt_login_form, 'login_url'):
+            return self.alt_login_form.login_url(next)
+        return self.auth.settings.login_url
+
+    def logout_url(self, next):
+        """
+        Optional implement for alt_login_form.
+
+        Called if bool(alt_login_form.get_user) is True.
+
+        If alt_login_form implemented logout_url function, it will return that function call.
+        """
+        if hasattr(self.alt_login_form, 'logout_url'):
+            return self.alt_login_form.logout_url(next)
+        return next
+
+    def login_form(self):
+        """
+        Combine the auth() form with alt_login_form.
+
+        If signals are set and a parameter in request matches any signals,
+        it will return the call of alt_login_form.login_form instead.
+        So alt_login_form can handle some particular situations, for example,
+        multiple steps of OpenID login inside alt_login_form.login_form.
+
+        Otherwise it will render the normal login form combined with
+        alt_login_form.login_form.
+        """
+        request = self.auth.environment.request
+        args = request.args
+
+        if (self.signals and
+            any([True for signal in self.signals if request.vars.has_key(signal)])
+           ):
+            return self.alt_login_form.login_form()
+
+        self.auth.settings.login_form = self.auth
+        form = DIV(self.auth())
+        self.auth.settings.login_form = self
+
+        form.components.append(self.alt_login_form.login_form())
+        return form

ADDED   gluon/contrib/login_methods/gae_google_account.py
Index: gluon/contrib/login_methods/gae_google_account.py
==================================================================
--- /dev/null
+++ gluon/contrib/login_methods/gae_google_account.py
@@ -0,0 +1,37 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of web2py Web Framework (Copyrighted, 2007-2009).
+Developed by Massimo Di Pierro .
+License: GPL v2
+
+Thanks to Hans Donner  for GaeGoogleAccount.
+"""
+
+from google.appengine.api import users
+
+class GaeGoogleAccount(object):
+    """
+    Login will be done via Google's Appengine login object, instead of web2py's
+    login form.
+
+    Include in your model (eg db.py)::
+
+        from gluon.contrib.login_methods.gae_google_account import \
+            GaeGoogleAccount
+        auth.settings.login_form=GaeGoogleAccount()
+
+    """
+
+    def login_url(self, next="/"):
+        return users.create_login_url(next)
+
+    def logout_url(self, next="/"):
+        return users.create_logout_url(next)
+
+    def get_user(self):
+        user = users.get_current_user()
+        if user:
+            return dict(nickname=user.nickname(), email=user.email(),
+                        user_id=user.user_id(), source="google account")

ADDED   gluon/contrib/login_methods/ldap_auth.py
Index: gluon/contrib/login_methods/ldap_auth.py
==================================================================
--- /dev/null
+++ gluon/contrib/login_methods/ldap_auth.py
@@ -0,0 +1,170 @@
+import sys
+import logging
+try:
+    import ldap
+    ldap.set_option(ldap.OPT_REFERRALS, 0)
+except Exception, e:
+    logging.error('missing ldap, try "easy_install python-ldap"')
+    raise e
+
+
+def ldap_auth(server='ldap', port=None,
+            base_dn='ou=users,dc=domain,dc=com',
+            mode='uid', secure=False, cert_path=None, bind_dn=None, bind_pw=None, filterstr='objectClass=*'):
+    """
+    to use ldap login with MS Active Directory::
+
+        from gluon.contrib.login_methods.ldap_auth import ldap_auth
+        auth.settings.login_methods.append(ldap_auth(
+            mode='ad', server='my.domain.controller',
+            base_dn='ou=Users,dc=domain,dc=com'))
+
+    to use ldap login with Notes Domino::
+
+        auth.settings.login_methods.append(ldap_auth(
+            mode='domino',server='my.domino.server'))
+
+    to use ldap login with OpenLDAP::
+
+        auth.settings.login_methods.append(ldap_auth(
+            server='my.ldap.server', base_dn='ou=Users,dc=domain,dc=com'))
+
+    to use ldap login with OpenLDAP and subtree search and (optionally) multiple DNs:
+
+        auth.settings.login_methods.append(ldap_auth(
+            mode='uid_r', server='my.ldap.server',
+            base_dn=['ou=Users,dc=domain,dc=com','ou=Staff,dc=domain,dc=com']))
+
+    or (if using CN)::
+
+        auth.settings.login_methods.append(ldap_auth(
+            mode='cn', server='my.ldap.server',
+            base_dn='ou=Users,dc=domain,dc=com'))
+
+    If using secure ldaps:// pass secure=True and cert_path="..."
+
+    If you need to bind to the directory with an admin account in order to search it then specify bind_dn & bind_pw to use for this.
+    - currently only implemented for Active Directory
+
+    If you need to restrict the set of allowed users (e.g. to members of a department) then specify
+    a rfc4515 search filter string.
+    - currently only implemented for mode in ['ad', 'company', 'uid_r']
+    """
+
+    def ldap_auth_aux(username,
+                      password,
+                      ldap_server=server,
+                      ldap_port=port,
+                      ldap_basedn=base_dn,
+                      ldap_mode=mode,
+                      ldap_binddn=bind_dn,
+                      ldap_bindpw=bind_pw,
+                      secure=secure,
+                      cert_path=cert_path,
+                      filterstr=filterstr):
+        try:
+            if secure:
+                if not ldap_port:
+                    ldap_port = 636
+                con = ldap.initialize(
+                    "ldaps://" + ldap_server + ":" + str(ldap_port))
+                if cert_path:
+                    con.set_option(ldap.OPT_X_TLS_CACERTDIR, cert_path)
+            else:
+                if not ldap_port:
+                    ldap_port = 389
+                con = ldap.initialize(
+                    "ldap://" + ldap_server + ":" + str(ldap_port))
+
+            if ldap_mode == 'ad':
+                # Microsoft Active Directory
+                if '@' not in username:
+                    domain = []
+                    for x in ldap_basedn.split(','):
+                        if "DC=" in x.upper():
+                            domain.append(x.split('=')[-1])
+                    username = "%s@%s" % (username, '.'.join(domain))
+                username_bare = username.split("@")[0]
+                con.set_option(ldap.OPT_PROTOCOL_VERSION, 3)
+                if ldap_binddn:
+                    # need to search directory with an admin account 1st
+                    con.simple_bind_s(ldap_binddn, ldap_bindpw)
+                else:
+                    # credentials should be in the form of username@domain.tld
+                    con.simple_bind_s(username, password)
+                # this will throw an index error if the account is not found
+                # in the ldap_basedn
+                result = con.search_ext_s(
+                    ldap_basedn, ldap.SCOPE_SUBTREE,
+                    "(&(sAMAccountName=%s)(%s))" % (username_bare, filterstr), ["sAMAccountName"])[0][1]
+                if ldap_binddn:
+                    # We know the user exists & is in the correct OU
+                    # so now we just check the password
+                    con.simple_bind_s(username, password)
+
+            if ldap_mode == 'domino':
+                # Notes Domino
+                if "@" in username:
+                    username = username.split("@")[0]
+                con.simple_bind_s(username, password)
+
+            if ldap_mode == 'cn':
+                # OpenLDAP (CN)
+                dn = "cn=" + username + "," + ldap_basedn
+                con.simple_bind_s(dn, password)
+
+            if ldap_mode == 'uid':
+                # OpenLDAP (UID)
+                dn = "uid=" + username + "," + ldap_basedn
+                con.simple_bind_s(dn, password)
+
+            if ldap_mode == 'company':
+                # no DNs or password needed to search directory
+                dn = ""
+                pw = ""
+                # bind anonymously
+                con.simple_bind_s(dn, pw)
+                # search by e-mail address
+                filter = '(&(mail=' + username + ')(' + filterstr + '))'
+                # find the uid
+                attrs = ['uid']
+                # perform the actual search
+                company_search_result=con.search_s(ldap_basedn,
+                                                   ldap.SCOPE_SUBTREE,
+                                                   filter, attrs)
+                dn = company_search_result[0][0]
+                # perform the real authentication test
+                con.simple_bind_s(dn, password)
+
+            if ldap_mode == 'uid_r':
+                # OpenLDAP (UID) with subtree search and multiple DNs
+                if type(ldap_basedn) == type([]):
+                    basedns = ldap_basedn
+                else:
+                    basedns = [ldap_basedn]
+                filter = '(&(uid=%s)(%s))' % (username, filterstr)
+                for basedn in basedns:
+                    try:
+                        result = con.search_s(basedn, ldap.SCOPE_SUBTREE, filter)
+                        if result:
+                            user_dn = result[0][0]
+                            # Check the password
+                            con.simple_bind_s(user_dn, password)
+                            con.unbind()
+                            return True
+                    except ldap.LDAPError, detail:
+                        (exc_type, exc_value) = sys.exc_info()[:2]
+                        sys.stderr.write("ldap_auth: searching %s for %s resulted in %s: %s\n" %
+                                         (basedn, filter, exc_type, exc_value))
+                return False
+
+            con.unbind()
+            return True
+        except ldap.LDAPError, e:
+            return False
+        except IndexError, ex: # for AD membership test
+            return False
+
+    if filterstr[0] == '(' and filterstr[-1] == ')': # rfc4515 syntax
+        filterstr = filterstr[1:-1] # parens added again where used
+    return ldap_auth_aux

ADDED   gluon/contrib/login_methods/linkedin_account.py
Index: gluon/contrib/login_methods/linkedin_account.py
==================================================================
--- /dev/null
+++ gluon/contrib/login_methods/linkedin_account.py
@@ -0,0 +1,50 @@
+
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of web2py Web Framework (Copyrighted, 2007-2009).
+Developed by Massimo Di Pierro .
+License: GPL v2
+
+Thanks to Hans Donner  for GaeGoogleAccount.
+"""
+
+from gluon.http import HTTP
+try:
+    import linkedin
+except ImportError:
+    raise HTTP(400,"linkedin module not found")
+
+class LinkedInAccount(object):
+    """
+    Login will be done via Google's Appengine login object, instead of web2py's
+    login form.
+
+    Include in your model (eg db.py)::
+
+        from gluon.contrib.login_methods.linkedin_account import LinkedInAccount
+        auth.settings.login_form=LinkedInAccount(request,KEY,SECRET,RETURN_URL)
+
+    """
+
+    def __init__(self,request,key,secret,return_url):
+        self.request = request
+        self.api = linkedin.LinkedIn(key,secret,return_url)
+        self.token = result = self.api.requestToken()
+
+    def login_url(self, next="/"):
+        return self.api.getAuthorizeURL(self.token)
+
+    def logout_url(self, next="/"):
+        return ''
+
+    def get_user(self):
+        result = self.request.vars.verifier and self.api.accessToken(verifier = self.request.vars.verifier )
+        if result:
+            profile = self.api.GetProfile()
+            profile = self.api.GetProfile(profile).public_url = "http://www.linkedin.com/in/ozgurv"
+            return dict(first_name = profile.first_name,
+                        last_name = profile.last_name,
+                        username = profile.id)
+

ADDED   gluon/contrib/login_methods/loginza.py
Index: gluon/contrib/login_methods/loginza.py
==================================================================
--- /dev/null
+++ gluon/contrib/login_methods/loginza.py
@@ -0,0 +1,111 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+   Loginza.ru authentication for web2py
+   Developed by Vladimir Dronnikov (Copyright © 2011)
+   Email 
+"""
+
+import urllib
+from gluon.html import *
+from gluon.tools import fetch
+from gluon.storage import Storage
+import gluon.contrib.simplejson as json
+
+class Loginza(object):
+
+    """
+    from gluon.contrib.login_methods.loginza import Loginza
+    auth.settings.login_form = Loginza(request,
+        url = "http://localhost:8000/%s/default/user/login" % request.application)
+    """
+
+    def __init__(self,
+                 request,
+                 url = "",
+                 embed = True,
+                 auth_url = "http://loginza.ru/api/authinfo",
+                 language = "en",
+                 prompt = "loginza",
+                 on_login_failure = None,
+                ):
+
+        self.request = request
+        self.token_url = url
+        self.embed = embed
+        self.auth_url = auth_url
+        self.language = language
+        self.prompt = prompt
+        self.profile = None
+        self.on_login_failure = on_login_failure
+        self.mappings = Storage()
+
+        # TODO: profile.photo is the URL to the picture
+        # Howto download and store it locally?
+        # FIXME: what if email is unique=True
+
+        self.mappings["http://twitter.com/"] = lambda profile:\
+            dict(registration_id = profile.get("identity",""),
+                 username = profile.get("nickname",""),
+                 email = profile.get("email",""),
+                 last_name = profile.get("name","").get("full_name",""),
+                 #avatar = profile.get("photo",""),
+            )
+        self.mappings["https://www.google.com/accounts/o8/ud"] = lambda profile:\
+            dict(registration_id = profile.get("identity",""),
+                 username = profile.get("name","").get("full_name",""),
+                 email = profile.get("email",""),
+                 first_name = profile.get("name","").get("first_name",""),
+                 last_name = profile.get("name","").get("last_name",""),
+                 #avatar = profile.get("photo",""),
+            )
+        self.mappings["http://vkontakte.ru/"] = lambda profile:\
+            dict(registration_id=profile.get("identity",""),
+                 username = profile.get("name","").get("full_name",""),
+                 email = profile.get("email",""),
+                 first_name = profile.get("name","").get("first_name",""),
+                 last_name = profile.get("name","").get("last_name",""),
+                 #avatar = profile.get("photo",""),
+            )
+        self.mappings.default = lambda profile:\
+            dict(registration_id = profile.get("identity",""),
+                 username = profile.get("name","").get("full_name"),
+                 email = profile.get("email",""),
+                 first_name = profile.get("name","").get("first_name",""),
+                 last_name = profile.get("name","").get("last_name",""),
+                 #avatar = profile.get("photo",""),
+            )
+
+    def get_user(self):
+        request = self.request
+        if request.vars.token:
+            user = Storage()
+            data = urllib.urlencode(dict(token = request.vars.token))
+            auth_info_json = fetch(self.auth_url+'?'+data)
+            #print auth_info_json
+            auth_info = json.loads(auth_info_json)
+            if auth_info["identity"] != None:
+                self.profile = auth_info
+                provider = self.profile["provider"]
+                user = self.mappings.get(provider, self.mappings.default)(self.profile)
+                #user["password"] = ???
+                #user["avatar"] = ???
+                return user
+            elif self.on_login_failure:
+                redirect(self.on_login_failure)
+        return None
+
+    def login_form(self):
+        request = self.request
+        args = request.args
+        LOGINZA_URL = "https://loginza.ru/api/widget?lang=%s&token_url=%s&overlay=loginza"
+        if self.embed:
+            form = IFRAME(_src=LOGINZA_URL % (self.language, self.token_url),
+                          _scrolling="no",
+                          _frameborder="no",
+                          _style="width:359px;height:300px;")
+        else:
+            form = DIV(A(self.prompt, _href=LOGINZA_URL % (self.language, self.token_url), _class="loginza"),
+                   SCRIPT(_src="https://s3-eu-west-1.amazonaws.com/s1.loginza.ru/js/widget.js", _type="text/javascript"))
+        return form

ADDED   gluon/contrib/login_methods/oauth10a_account.py
Index: gluon/contrib/login_methods/oauth10a_account.py
==================================================================
--- /dev/null
+++ gluon/contrib/login_methods/oauth10a_account.py
@@ -0,0 +1,189 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+Written by Michele Comitini 
+License: GPL v3
+
+Adds support for  OAuth1.0a authentication to web2py.
+
+Dependencies:
+ - python-oauth2 (http://github.com/simplegeo/python-oauth2)
+
+"""
+
+import oauth2 as oauth
+import cgi
+
+from urllib2 import urlopen
+import urllib2
+from urllib import urlencode
+
+class OAuthAccount(object):
+    """
+    Login will be done via   OAuth Framework, instead of web2py's
+    login form.
+
+    Include in your model (eg db.py)::
+        # define the auth_table before call to auth.define_tables()
+        auth_table = db.define_table(
+           auth.settings.table_user_name,
+           Field('first_name', length=128, default=""),
+           Field('last_name', length=128, default=""),
+           Field('username', length=128, default="", unique=True),
+           Field('password', 'password', length=256,
+           readable=False, label='Password'),
+           Field('registration_key', length=128, default= "",
+           writable=False, readable=False))
+
+        auth_table.username.requires = IS_NOT_IN_DB(db, auth_table.username)
+        .
+        .
+        .
+        auth.define_tables()
+        .
+        .
+        .
+
+        CLIENT_ID=\"\"
+        CLIENT_SECRET=\"\"
+        AUTH_URL="..."
+        TOKEN_URL="..."
+        ACCESS_TOKEN_URL="..."
+        from gluon.contrib.login_methods.oauth10a_account import OAuthAccount
+        auth.settings.login_form=OAuthAccount(globals(),CLIENT_ID,CLIENT_SECRET, AUTH_URL, TOKEN_URL, ACCESS_TOKEN_URL)
+
+    """
+
+    def __redirect_uri(self, next=None):
+        """Build the uri used by the authenticating server to redirect
+        the client back to the page originating the auth request.
+        Appends the _next action to the generated url so the flows continues.
+        """
+        r = self.request
+        http_host=r.env.http_x_forwarded_for
+        if not http_host: http_host=r.env.http_host
+
+        url_scheme = r.env.wsgi_url_scheme
+        if next:
+            path_info = next
+        else:
+            path_info = r.env.path_info
+        uri = '%s://%s%s' %(url_scheme, http_host, path_info)
+        if r.get_vars and not next:
+            uri += '?' + urlencode(r.get_vars)
+        return uri
+
+
+    def accessToken(self):
+        """Return the access token generated by the authenticating server.
+
+        If token is already in the session that one will be used.
+        Otherwise the token is fetched from the auth server.
+
+        """
+
+        if self.session.access_token:
+            # return the token (TODO: does it expire?)
+
+            return self.session.access_token
+        if self.session.request_token:
+            # Exchange the request token with an authorization token.
+            token = self.session.request_token
+            self.session.request_token = None
+
+            # Build an authorized client
+            # OAuth1.0a put the verifier!
+            token.set_verifier(self.request.vars.oauth_verifier)
+            client = oauth.Client(self.consumer, token)
+
+
+            resp, content = client.request(self.access_token_url, "POST")
+            if str(resp['status']) != '200':
+                self.session.request_token = None
+                self.globals['redirect'](self.globals['URL'](f='user',args='logout'))
+
+
+            self.session.access_token = oauth.Token.from_string(content)
+
+            return self.session.access_token
+
+        self.session.access_token = None
+        return None
+
+    def __init__(self, g, client_id, client_secret, auth_url,  token_url, access_token_url):
+        self.globals = g
+        self.client_id = client_id
+        self.client_secret = client_secret
+        self.code = None
+        self.request = g['request']
+        self.session = g['session']
+        self.auth_url = auth_url
+        self.token_url = token_url
+        self.access_token_url = access_token_url
+
+        # consumer init
+        self.consumer = oauth.Consumer(self.client_id, self.client_secret)
+
+
+    def login_url(self, next="/"):
+        self.__oauth_login(next)
+        return next
+
+    def logout_url(self, next="/"):
+        self.session.request_token = None
+        self.session.access_token = None
+        return next
+
+    def get_user(self):
+        '''Get user data.
+
+        Since OAuth does not specify what a user
+        is, this function must be implemented for the specific
+        provider.
+        '''
+        raise NotImplementedError, "Must override get_user()"
+
+    def __oauth_login(self, next):
+        '''This method redirects the user to the authenticating form
+        on authentication server if the authentication code
+        and the authentication token are not available to the
+        application yet.
+
+        Once the authentication code has been received this method is
+        called to set the access token into the session by calling
+        accessToken()
+        '''
+
+        if not self.accessToken():
+            # setup the client
+            client = oauth.Client(self.consumer, None)
+            # Get a request token.
+            # oauth_callback *is REQUIRED* for OAuth1.0a
+            # putting it in the body seems to work.
+            callback_url = self.__redirect_uri(next)
+            data = urlencode(dict(oauth_callback=callback_url))
+            resp, content = client.request(self.token_url, "POST",  body=data)
+            if resp['status'] != '200':
+                self.session.request_token = None
+                self.globals['redirect'](self.globals['URL'](f='user',args='logout'))
+
+            # Store the request token in session.
+            request_token = self.session.request_token = oauth.Token.from_string(content)
+
+            # Redirect the user to the authentication URL and pass the callback url.
+            data = urlencode(dict(oauth_token=request_token.key,
+                                  oauth_callback=callback_url))
+            auth_request_url = self.auth_url + '?' +data
+
+
+            HTTP = self.globals['HTTP']
+
+
+            raise HTTP(307,
+                       "You are not authenticated: you are being redirected to the  authentication server",
+                       Location=auth_request_url)
+
+        return None
+
+

ADDED   gluon/contrib/login_methods/oauth20_account.py
Index: gluon/contrib/login_methods/oauth20_account.py
==================================================================
--- /dev/null
+++ gluon/contrib/login_methods/oauth20_account.py
@@ -0,0 +1,206 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+Written by Michele Comitini 
+License: GPL v3
+
+Adds support for  OAuth 2.0 authentication to web2py.
+
+OAuth 2.0 Draft:  http://tools.ietf.org/html/draft-ietf-oauth-v2-10
+"""
+
+import time
+import cgi
+
+from urllib2 import urlopen
+import urllib2
+from urllib import urlencode
+
+class OAuthAccount(object):
+    """
+    Login will be done via   OAuth Framework, instead of web2py's
+    login form.
+
+    Include in your model (eg db.py)::
+        # define the auth_table before call to auth.define_tables()
+        auth_table = db.define_table(
+           auth.settings.table_user_name,
+           Field('first_name', length=128, default=""),
+           Field('last_name', length=128, default=""),
+           Field('username', length=128, default="", unique=True),
+           Field('password', 'password', length=256,
+           readable=False, label='Password'),
+           Field('registration_key', length=128, default= "",
+           writable=False, readable=False))
+
+        auth_table.username.requires = IS_NOT_IN_DB(db, auth_table.username)
+        .
+        .
+        .
+        auth.define_tables()
+        .
+        .
+        .
+
+        CLIENT_ID=\"\"
+        CLIENT_SECRET=\"\"
+        AUTH_URL="http://..."
+        TOKEN_URL="http://..."
+        from gluon.contrib.login_methods.oauth20_account import OAuthAccount
+        auth.settings.login_form=OAuthAccount(globals(),CLIENT_ID,CLIENT_SECRET,AUTH_URL, TOKEN_URL, **args )
+    Any optional arg will be passed as is to remote server for requests.
+    It can be used for the optional "scope" parameters for Facebook.
+    """
+    def __redirect_uri(self, next=None):
+        """Build the uri used by the authenticating server to redirect
+        the client back to the page originating the auth request.
+        Appends the _next action to the generated url so the flows continues.
+        """
+
+        r = self.request
+        http_host=r.env.http_x_forwarded_for
+        if not http_host: http_host=r.env.http_host
+
+        url_scheme = r.env.wsgi_url_scheme
+        if next:
+            path_info = next
+        else:
+            path_info = r.env.path_info
+        uri = '%s://%s%s' %(url_scheme, http_host, path_info)
+        if r.get_vars and not next:
+            uri += '?' + urlencode(r.get_vars)
+        return uri
+
+
+    def __build_url_opener(self, uri):
+        """Build the url opener for managing HTTP Basic Athentication"""
+        # Create an OpenerDirector with support for Basic HTTP Authentication...
+        auth_handler = urllib2.HTTPBasicAuthHandler()
+        auth_handler.add_password(None,
+                                  uri,
+                                  self.client_id,
+                                  self.client_secret)
+        opener = urllib2.build_opener(auth_handler)
+        return opener
+
+
+    def accessToken(self):
+        """Return the access token generated by the authenticating server.
+
+        If token is already in the session that one will be used.
+        Otherwise the token is fetched from the auth server.
+
+        """
+        if self.session.token and self.session.token.has_key('expires'):
+            expires = self.session.token['expires']
+            # reuse token until expiration
+            if expires == 0 or expires > time.time():
+                        return self.session.token['access_token']
+        if self.session.code:
+            data = dict(client_id=self.client_id,
+                        client_secret=self.client_secret,
+                        redirect_uri=self.session.redirect_uri,
+                        response_type='token', code=self.session.code)
+
+
+            if self.args:
+                data.update(self.args)
+            open_url = None
+            opener = self.__build_url_opener(self.token_url)
+            try:
+                open_url = opener.open(self.token_url, urlencode(data))
+            except urllib2.HTTPError, e:
+                raise Exception(e.read())
+            finally:
+                del self.session.code # throw it away
+
+            if open_url:
+                try:
+                    tokendata = cgi.parse_qs(open_url.read())
+                    self.session.token = dict([(k,v[-1]) for k,v in tokendata.items()])
+                    # set expiration absolute time try to avoid broken
+                    # implementations where "expires_in" becomes "expires"
+                    if self.session.token.has_key('expires_in'):
+                        exps = 'expires_in'
+                    else:
+                        exps = 'expires'
+                    self.session.token['expires'] = int(self.session.token[exps]) + \
+                        time.time()
+                finally:
+                    opener.close()
+                return self.session.token['access_token']
+
+        self.session.token = None
+        return None
+
+    def __init__(self, g, client_id, client_secret, auth_url, token_url, **args):
+        self.globals = g
+        self.client_id = client_id
+        self.client_secret = client_secret
+        self.request = g['request']
+        self.session = g['session']
+        self.auth_url = auth_url
+        self.token_url = token_url
+        self.args = args
+
+    def login_url(self, next="/"):
+        self.__oauth_login(next)
+        return next
+
+    def logout_url(self, next="/"):
+        del self.session.token
+        return next
+
+    def get_user(self):
+        '''Returns the user using the Graph API.
+        '''
+        raise NotImplementedError, "Must override get_user()"
+        if not self.accessToken():
+            return None
+
+        if not self.graph:
+            self.graph = GraphAPI((self.accessToken()))
+
+        user = None
+        try:
+            user = self.graph.get_object("me")
+        except GraphAPIError:
+            self.session.token = None
+            self.graph = None
+
+        if user:
+            return dict(first_name = user['first_name'],
+                        last_name = user['last_name'],
+                        username = user['id'])
+
+
+
+    def __oauth_login(self, next):
+        '''This method redirects the user to the authenticating form
+        on authentication server if the authentication code
+        and the authentication token are not available to the
+        application yet.
+
+        Once the authentication code has been received this method is
+        called to set the access token into the session by calling
+        accessToken()
+        '''
+        if not self.accessToken():
+            if not self.request.vars.code:
+                self.session.redirect_uri=self.__redirect_uri(next)
+                data = dict(redirect_uri=self.session.redirect_uri,
+                                  response_type='code',
+                                  client_id=self.client_id)
+                if self.args:
+                    data.update(self.args)
+                auth_request_url = self.auth_url + "?" +urlencode(data)
+                HTTP = self.globals['HTTP']
+                raise HTTP(307,
+                           "You are not authenticated: you are being redirected to the  authentication server",
+                           Location=auth_request_url)
+            else:
+                self.session.code = self.request.vars.code
+                self.accessToken()
+                return self.session.code
+        return None

ADDED   gluon/contrib/login_methods/openid_auth.py
Index: gluon/contrib/login_methods/openid_auth.py
==================================================================
--- /dev/null
+++ gluon/contrib/login_methods/openid_auth.py
@@ -0,0 +1,631 @@
+#!/usr/bin/env python
+# coding: utf8
+
+"""
+    OpenID authentication for web2py
+
+    Allowed using OpenID login together with web2py built-in login.
+
+    By default, to support OpenID login, put this in your db.py
+
+    >>> from gluon.contrib.login_methods.openid_auth import OpenIDAuth
+    >>> auth.settings.login_form = OpenIDAuth(auth)
+
+    To show OpenID list in user profile, you can add the following code
+    before the end of function user() of your_app/controllers/default.py
+
+    +     if (request.args and request.args(0) == "profile"):
+    +         form = DIV(form, openid_login_form.list_user_openids())
+        return dict(form=form, login_form=login_form, register_form=register_form, self_registration=self_registration)
+
+    More detail in the description of the class OpenIDAuth.
+
+    Requirements:
+        python-openid version 2.2.5 or later
+
+    Reference:
+        * w2p openID
+          http://w2popenid.appspot.com/init/default/wiki/w2popenid
+        * RPX and web2py auth module
+          http://www.web2pyslices.com/main/slices/take_slice/28
+        * built-in file: gluon/contrib/login_methods/rpx_account.py
+        * built-in file: gluon/tools.py (Auth class)
+"""
+import time
+from datetime import datetime, timedelta
+
+from gluon import *
+from gluon.storage import Storage, Messages
+
+try:
+    import openid.consumer.consumer
+    from openid.association import Association
+    from openid.store.interface import OpenIDStore
+    from openid.extensions.sreg import SRegRequest, SRegResponse
+    from openid.store import nonce
+    from openid.consumer.discover import DiscoveryFailure
+except ImportError, err:
+    raise ImportError("OpenIDAuth requires python-openid package")
+
+DEFAULT = lambda: None
+
+class OpenIDAuth(object):
+    """
+    OpenIDAuth
+
+    It supports the logout_url, implementing the get_user and login_form
+    for cas usage of gluon.tools.Auth.
+
+    It also uses the ExtendedLoginForm to allow the OpenIDAuth login_methods
+    combined with the standard logon/register procedure.
+
+    It uses OpenID Consumer when render the form and begins the OpenID
+    authentication.
+
+    Example: (put these code after auth.define_tables() in your models.)
+
+    auth = Auth(globals(), db)                # authentication/authorization
+    ...
+    auth.define_tables()                      # creates all needed tables
+    ...
+
+    #include in your model after auth has been defined
+    from gluon.contrib.login_methods.openid_auth import OpenIDAuth
+    openid_login_form = OpenIDAuth(request, auth, db)
+
+    from gluon.contrib.login_methods.extended_login_form import ExtendedLoginForm
+    extended_login_form = ExtendedLoginForm(request, auth, openid_login_form,
+                                            signals=['oid','janrain_nonce'])
+
+    auth.settings.login_form = extended_login_form
+    """
+
+    def __init__(self, auth):
+        self.auth = auth
+        self.db = auth.db
+
+        request = current.request
+        self.nextvar = '_next'
+        self.realm = 'http://%s' % request.env.http_host
+        self.login_url = URL(r=request, f='user', args=['login'])
+        self.return_to_url = self.realm + self.login_url
+
+        self.table_alt_logins_name = "alt_logins"
+        if not auth.settings.table_user:
+            raise
+        self.table_user = self.auth.settings.table_user
+        self.openid_expiration = 15 #minutes
+
+        self.messages = self._define_messages()
+
+        if not self.table_alt_logins_name in self.db.tables:
+            self._define_alt_login_table()
+
+    def _define_messages(self):
+        messages = Messages(current.T)
+        messages.label_alt_login_username = 'Sign-in with OpenID: '
+        messages.label_add_alt_login_username = 'Add a new OpenID: '
+        messages.submit_button = 'Sign in'
+        messages.submit_button_add = 'Add'
+        messages.a_delete = 'Delete'
+        messages.comment_openid_signin = 'What is OpenID?'
+        messages.comment_openid_help_title = 'Start using your OpenID'
+        messages.comment_openid_help_url = 'http://openid.net/get-an-openid/start-using-your-openid/'
+        messages.openid_fail_discover = 'Failed to discover OpenID service. Check your OpenID or "More about OpenID"?'
+        messages.flash_openid_expired = 'OpenID expired. Please login or authenticate OpenID again. Sorry for the inconvenient.'
+        messages.flash_openid_associated = 'OpenID associated'
+        messages.flash_associate_openid = 'Please login or register an account for this OpenID.'
+        messages.p_openid_not_registered = "This Open ID haven't be registered. " \
+                + "Please login to associate with it or register an account for it."
+        messages.flash_openid_authenticated = 'OpenID authenticated successfully.'
+        messages.flash_openid_fail_authentication = 'OpenID authentication failed. (Error message: %s)'
+        messages.flash_openid_canceled = 'OpenID authentication canceled by user.'
+        messages.flash_openid_need_setup = 'OpenID authentication needs to be setup by the user with the provider first.'
+        messages.h_openid_login = 'OpenID Login'
+        messages.h_openid_list = 'OpenID List'
+        return messages
+
+    def _define_alt_login_table(self):
+        """
+        Define the OpenID login table.
+        Note: type is what I used for our project. We're going to support 'fackbook' and
+              'plurk' alternate login methods. Otherwise it's always 'openid' and you
+              may not need it. This should be easy to changed.
+              (Just remove the field of "type" and remove the
+               "and db.alt_logins.type == type_" in _find_matched_openid function)
+        """
+        db = self.db
+        table = db.define_table(
+            self.table_alt_logins_name,
+            Field('username', length=512, default=''),
+            Field('type', length=128, default='openid', readable=False),
+            Field('user', self.table_user, readable=False),
+        )
+        table.username.requires = IS_NOT_IN_DB(db, table.username)
+        self.table_alt_logins = table
+
+    def logout_url(self, next):
+        """
+        Delete the w2popenid record in session as logout
+        """
+        if current.session.w2popenid:
+            del(current.session.w2popenid)
+        return next
+
+    def login_form(self):
+        """
+        Start to process the OpenID response if 'janrain_nonce' in request parameters
+        and not processed yet. Else return the OpenID form for login.
+        """
+        request = current.request
+        if request.vars.has_key('janrain_nonce') and not self._processed():
+            self._process_response()
+            return self.auth()
+        return self._form()
+
+    def get_user(self):
+        """
+        It supports the logout_url, implementing the get_user and login_form
+        for cas usage of gluon.tools.Auth.
+        """
+        request = current.request
+        args = request.args
+
+        if args[0] == 'logout':
+            return True # Let logout_url got called
+
+        if current.session.w2popenid:
+            w2popenid = current.session.w2popenid
+            db = self.db
+            if (w2popenid.ok is True and w2popenid.oid): # OpenID authenticated
+                if self._w2popenid_expired(w2popenid):
+                    del(current.session.w2popenid)
+                    flash = self.messages.flash_openid_expired
+                    current.session.warning = flash
+                    redirect(self.auth.settings.login_url)
+                oid = self._remove_protocol(w2popenid.oid)
+                alt_login = self._find_matched_openid(db, oid)
+
+                nextvar = self.nextvar
+                # This OpenID not in the database. If user logged in then add it
+                # into database, else ask user to login or register.
+                if not alt_login:
+                    if self.auth.is_logged_in():
+                        # TODO: ask first maybe
+                        self._associate_user_openid(self.auth.user, oid)
+                        if current.session.w2popenid:
+                            del(current.session.w2popenid)
+                        current.session.flash = self.messages.flash_openid_associated
+                        if request.vars.has_key(nextvar):
+                            redirect(request.vars[nextvar])
+                        redirect(self.auth.settings.login_next)
+
+                    if not request.vars.has_key(nextvar):
+                        # no next var, add it and do login again
+                        # so if user login or register can go back here to associate the OpenID
+                        redirect(URL(r=request,
+                                                      args=['login'],
+                                                      vars={nextvar:self.login_url}))
+                    self.login_form = self._form_with_notification()
+                    current.session.flash = self.messages.flash_associate_openid
+                    return None # need to login or register to associate this openid
+
+                # Get existed OpenID user
+                user = db(self.table_user.id==alt_login.user).select().first()
+                if user:
+                    if current.session.w2popenid:
+                        del(current.session.w2popenid)
+                if 'username' in self.table_user.fields():
+                    username = 'username'
+                elif 'email' in self.table_user.fields():
+                    username = 'email'
+                return {username: user[username]} if user else None # login success (almost)
+
+        return None # just start to login
+
+    def _find_matched_openid(self, db, oid, type_='openid'):
+        """
+        Get the matched OpenID for given
+        """
+        query = ((db.alt_logins.username == oid) & (db.alt_logins.type == type_))
+        alt_login = db(query).select().first() # Get the OpenID record
+        return alt_login
+
+    def _associate_user_openid(self, user, oid):
+        """
+        Associate the user logged in with given OpenID
+        """
+        # print "[DB] %s authenticated" % oid
+        self.db.alt_logins.insert(username=oid, user=user.id)
+
+    def _form_with_notification(self):
+        """
+        Render the form for normal login with a notice of OpenID authenticated
+        """
+        form = DIV()
+        # TODO: check when will happen
+        if self.auth.settings.login_form in (self.auth, self):
+            self.auth.settings.login_form = self.auth
+            form = DIV(self.auth())
+
+        register_note = DIV(P(self.messages.p_openid_not_registered))
+        form.components.append(register_note)
+        return lambda: form
+
+    def _remove_protocol(self, oid):
+        """
+        Remove https:// or http:// from oid url
+        """
+        protocol = 'https://'
+        if oid.startswith(protocol):
+            oid = oid[len(protocol):]
+            return oid
+        protocol = 'http://'
+        if oid.startswith(protocol):
+            oid = oid[len(protocol):]
+            return oid
+        return oid
+
+    def _init_consumerhelper(self):
+        """
+        Initialize the ConsumerHelper
+        """
+        if not hasattr(self, "consumerhelper"):
+            self.consumerhelper = ConsumerHelper(current.session,
+                                                 self.db)
+        return self.consumerhelper
+
+
+    def _form(self, style=None):
+        form = DIV(H3(self.messages.h_openid_login), self._login_form(style))
+        return form
+
+    def _login_form(self,
+                    openid_field_label=None,
+                    submit_button=None,
+                    _next=None,
+                    style=None):
+        """
+        Render the form for OpenID login
+        """
+        def warning_openid_fail(session):
+            session.warning = messages.openid_fail_discover
+
+        style = style or """
+background-attachment: scroll;
+background-repeat: no-repeat;
+background-image: url("http://wiki.openid.net/f/openid-16x16.gif");
+background-position: 0% 50%;
+background-color: transparent;
+padding-left: 18px;
+width: 400px;
+"""
+        style = style.replace("\n","")
+
+        request = current.request
+        session = current.session
+        messages = self.messages
+        hidden_next_input = ""
+        if _next == 'profile':
+            profile_url = URL(r=request, f='user', args=['profile'])
+            hidden_next_input = INPUT(_type="hidden", _name="_next", _value=profile_url)
+        form = FORM(openid_field_label or self.messages.label_alt_login_username,
+                    INPUT(_type="input", _name="oid",
+                          requires=IS_NOT_EMPTY(error_message=messages.openid_fail_discover),
+                          _style=style),
+                    hidden_next_input,
+                    INPUT(_type="submit", _value=submit_button or messages.submit_button),
+                    " ",
+                    A(messages.comment_openid_signin,
+                      _href=messages.comment_openid_help_url,
+                      _title=messages.comment_openid_help_title,
+                      _class='openid-identifier',
+                      _target="_blank"),
+                    _action=self.login_url
+                   )
+        if form.accepts(request.vars, session):
+            oid = request.vars.oid
+            consumerhelper = self._init_consumerhelper()
+            url = self.login_url
+            return_to_url = self.return_to_url
+            if not oid:
+                warning_openid_fail(session)
+                redirect(url)
+            try:
+                if request.vars.has_key('_next'):
+                    return_to_url = self.return_to_url + '?_next=' + request.vars._next
+                url = consumerhelper.begin(oid, self.realm, return_to_url)
+            except DiscoveryFailure:
+                warning_openid_fail(session)
+            redirect(url)
+        return form
+
+    def _processed(self):
+        """
+        Check if w2popenid authentication is processed.
+        Return True if processed else False.
+        """
+        processed = (hasattr(current.session, 'w2popenid') and
+                     current.session.w2popenid.ok is True)
+        return processed
+
+    def _set_w2popenid_expiration(self, w2popenid):
+        """
+        Set expiration for OpenID authentication.
+        """
+        w2popenid.expiration = datetime.now() + timedelta(minutes=self.openid_expiration)
+
+    def _w2popenid_expired(self, w2popenid):
+        """
+        Check if w2popenid authentication is expired.
+        Return True if expired else False.
+        """
+        return (not w2popenid.expiration) or (datetime.now() > w2popenid.expiration)
+
+    def _process_response(self):
+        """
+        Process the OpenID by ConsumerHelper.
+        """
+        request = current.request
+        request_vars = request.vars
+        consumerhelper = self._init_consumerhelper()
+        process_status = consumerhelper.process_response(request_vars, self.return_to_url)
+        if process_status == "success":
+            w2popenid = current.session.w2popenid
+            user_data = self.consumerhelper.sreg()
+            current.session.w2popenid.ok = True
+            self._set_w2popenid_expiration(w2popenid)
+            w2popenid.user_data = user_data
+            current.session.flash = self.messages.flash_openid_authenticated
+        elif process_status == "failure":
+            flash = self.messages.flash_openid_fail_authentication % consumerhelper.error_message
+            current.session.warning = flash
+        elif process_status == "cancel":
+            current.session.warning = self.messages.flash_openid_canceled
+        elif process_status == "setup_needed":
+            current.session.warning = self.messages.flash_openid_need_setup
+
+    def list_user_openids(self):
+        messages = self.messages
+        request = current.request
+        if request.vars.has_key('delete_openid'):
+            self.remove_openid(request.vars.delete_openid)
+
+        query = self.db.alt_logins.user == self.auth.user.id
+        alt_logins = self.db(query).select()
+        l = []
+        for alt_login in alt_logins:
+            username = alt_login.username
+            delete_href = URL(r=request, f='user',
+                                          args=['profile'],
+                                          vars={'delete_openid': username})
+            delete_link = A(messages.a_delete, _href=delete_href)
+            l.append(LI(username, " ", delete_link))
+
+        profile_url = URL(r=request, f='user', args=['profile'])
+        #return_to_url = self.return_to_url + '?' + self.nextvar + '=' + profile_url
+        openid_list = DIV(H3(messages.h_openid_list), UL(l),
+                          self._login_form(
+                              _next='profile',
+                              submit_button=messages.submit_button_add,
+                              openid_field_label=messages.label_add_alt_login_username)
+                         )
+        return openid_list
+
+
+    def remove_openid(self, openid):
+        query = self.db.alt_logins.username == openid
+        self.db(query).delete()
+
+class ConsumerHelper(object):
+    """
+    ConsumerHelper knows the python-openid and
+    """
+
+    def __init__(self, session, db):
+       self.session = session
+       store = self._init_store(db)
+       self.consumer = openid.consumer.consumer.Consumer(session, store)
+
+    def _init_store(self, db):
+        """
+        Initialize Web2pyStore
+        """
+        if not hasattr(self, "store"):
+            store = Web2pyStore(db)
+            session = self.session
+            if not session.has_key('w2popenid'):
+                session.w2popenid = Storage()
+            self.store = store
+        return self.store
+
+    def begin(self, oid, realm, return_to_url):
+        """
+        Begin the OpenID authentication
+        """
+        w2popenid = self.session.w2popenid
+        w2popenid.oid = oid
+        auth_req = self.consumer.begin(oid)
+        auth_req.addExtension(SRegRequest(required=['email','nickname']))
+        url = auth_req.redirectURL(return_to=return_to_url, realm=realm)
+        return url
+
+    def process_response(self, request_vars, return_to_url):
+        """
+        Complete the process and
+        """
+        resp = self.consumer.complete(request_vars, return_to_url)
+        if resp:
+            if resp.status == openid.consumer.consumer.SUCCESS:
+                self.resp = resp
+                if hasattr(resp, "identity_url"):
+                    self.session.w2popenid.oid = resp.identity_url
+                return "success"
+            if resp.status == openid.consumer.consumer.FAILURE:
+                self.error_message = resp.message
+                return "failure"
+            if resp.status == openid.consumer.consumer.CANCEL:
+                return "cancel"
+            if resp.status == openid.consumer.consumer.SETUP_NEEDED:
+                return "setup_needed"
+        return "no resp"
+
+    def sreg(self):
+        """
+        Try to get OpenID Simple Registation
+        http://openid.net/specs/openid-simple-registration-extension-1_0.html
+        """
+        if self.resp:
+            resp = self.resp
+            sreg_resp = SRegResponse.fromSuccessResponse(resp)
+            return sreg_resp.data if sreg_resp else None
+        else:
+            return None
+
+
+class Web2pyStore(OpenIDStore):
+    """
+    Web2pyStore
+
+    This class implements the OpenIDStore interface. OpenID stores take care
+    of persisting nonces and associations. The Janrain Python OpenID library
+    comes with implementations for file and memory storage. Web2pyStore uses
+    the web2py db abstration layer. See the source code docs of OpenIDStore
+    for a comprehensive description of this interface.
+    """
+
+    def __init__(self, database):
+        self.database = database
+        self.table_oid_associations_name = 'oid_associations'
+        self.table_oid_nonces_name = 'oid_nonces'
+        self._initDB()
+
+    def _initDB(self):
+
+        if self.table_oid_associations_name not in self.database:
+            self.database.define_table(self.table_oid_associations_name,
+                            Field('server_url', 'string', length=2047, required=True),
+                            Field('handle', 'string', length=255, required=True),
+                            Field('secret', 'blob', required=True),
+                            Field('issued', 'integer', required=True),
+                            Field('lifetime', 'integer', required=True),
+                            Field('assoc_type', 'string', length=64, required=True)
+                           )
+        if self.table_oid_nonces_name not in self.database:
+            self.database.define_table(self.table_oid_nonces_name,
+                            Field('server_url', 'string', length=2047, required=True),
+                            Field('timestamp', 'integer', required=True),
+                            Field('salt', 'string', length=40, required=True)
+                           )
+
+    def storeAssociation(self, server_url, association):
+        """
+        Store associations. If there already is one with the same
+        server_url and handle in the table replace it.
+        """
+
+        db = self.database
+        query = (db.oid_associations.server_url == server_url) & (db.oid_associations.handle == association.handle)
+        db(query).delete()
+        db.oid_associations.insert(server_url = server_url,
+                                   handle = association.handle,
+                                   secret = association.secret,
+                                   issued = association.issued,
+                                   lifetime = association.lifetime,
+                                   assoc_type = association.assoc_type), 'insert '*10
+
+    def getAssociation(self, server_url, handle=None):
+        """
+        Return the association for server_url and handle. If handle is
+        not None return the latests associations for that server_url.
+        Return None if no association can be found.
+        """
+
+        db = self.database
+        query = (db.oid_associations.server_url == server_url)
+        if handle:
+            query &= (db.oid_associations.handle == handle)
+        rows = db(query).select(orderby=db.oid_associations.issued)
+        keep_assoc, _ = self._removeExpiredAssocations(rows)
+        if len(keep_assoc) == 0:
+            return None
+        else:
+            assoc = keep_assoc.pop() # pop the last one as it should be the latest one
+            return Association(assoc['handle'],
+                               assoc['secret'],
+                               assoc['issued'],
+                               assoc['lifetime'],
+                               assoc['assoc_type'])
+
+    def removeAssociation(self, server_url, handle):
+        db = self.database
+        query = (db.oid_associations.server_url == server_url) & (db.oid_associations.handle == handle)
+        return db(query).delete() != None
+
+    def useNonce(self, server_url, timestamp, salt):
+        """
+        This method returns Falase if a nonce has been used before or its
+        timestamp is not current.
+        """
+
+        db = self.database
+        if abs(timestamp - time.time()) > nonce.SKEW:
+            return False
+        query = (db.oid_nonces.server_url == server_url) & (db.oid_nonces.timestamp == timestamp) & (db.oid_nonces.salt == salt)
+        if db(query).count() > 0:
+            return False
+        else:
+           db.oid_nonces.insert(server_url = server_url,
+                                timestamp = timestamp,
+                                salt = salt)
+           return True
+
+    def _removeExpiredAssocations(self, rows):
+        """
+        This helper function is not part of the interface. Given a list of
+        association rows it checks which associations have expired and
+        deletes them from the db. It returns a tuple of the form
+        ([valid_assoc], no_of_expired_assoc_deleted).
+        """
+
+        db = self.database
+        keep_assoc = []
+        remove_assoc = []
+        t1970 = time.time()
+        for r in rows:
+            if r['issued'] + r['lifetime'] < t1970:
+                remove_assoc.append(r)
+            else:
+                keep_assoc.append(r)
+        for r in remove_assoc:
+            del db.oid_associations[r['id']]
+        return (keep_assoc, len(remove_assoc)) # return tuple (list of valid associations, number of deleted associations)
+
+    def cleanupNonces(self):
+        """
+        Remove expired nonce entries from DB and return the number
+        of entries deleted.
+        """
+
+        db = self.database
+        query = (db.oid_nonces.timestamp < time.time() - nonce.SKEW)
+        return db(query).delete()
+
+    def cleanupAssociations(self):
+        """
+        Remove expired associations from db and return the number
+        of entries deleted.
+        """
+
+        db = self.database
+        query = (db.oid_associations.id > 0)
+        return self._removeExpiredAssocations(db(query).select())[1] #return number of assoc removed
+
+    def cleanup(self):
+        """
+        This method should be run periodically to free the db from
+        expired nonce and association entries.
+        """
+
+        return self.cleanupNonces(), self.cleanupAssociations()
+

ADDED   gluon/contrib/login_methods/pam_auth.py
Index: gluon/contrib/login_methods/pam_auth.py
==================================================================
--- /dev/null
+++ gluon/contrib/login_methods/pam_auth.py
@@ -0,0 +1,13 @@
+from gluon.contrib.pam import authenticate
+
+def pam_auth():
+    """
+    to use pam_login:
+    from gluon.contrib.login_methods.pam_auth import pam_auth
+    auth.settings.login_methods.append(pam_auth())
+    """
+
+    def pam_auth_aux(username, password):
+        return authenticate(username, password)
+
+    return pam_auth_aux

ADDED   gluon/contrib/login_methods/rpx_account.py
Index: gluon/contrib/login_methods/rpx_account.py
==================================================================
--- /dev/null
+++ gluon/contrib/login_methods/rpx_account.py
@@ -0,0 +1,113 @@
+#!/usr/bin/env python
+# coding: utf8
+
+"""
+   RPX Authentication for web2py
+   Developed by Nathan Freeze (Copyright © 2009)
+   Email 
+   Modified by Massimo Di Pierro
+
+   This file contains code to allow using RPXNow.com (now Jainrain.com)
+   services with web2py
+"""
+
+import re
+import urllib
+from gluon.html import *
+from gluon.tools import fetch
+from gluon.storage import Storage
+import gluon.contrib.simplejson as json
+
+class RPXAccount(object):
+
+    """
+    from gluon.contrib.login_methods.rpx_account import RPXAccount
+    auth.settings.actions_disabled=['register','change_password','request_reset_password']
+    auth.settings.login_form = RPXAccount(request,
+              api_key="...",
+              domain="...",
+              url = "http://localhost:8000/%s/default/user/login" % request.application)
+    """
+
+    def __init__(self,
+                 request,
+                 api_key = "",
+                 domain = "",
+                 url = "",
+                 embed = True,
+                 auth_url = "https://rpxnow.com/api/v2/auth_info",
+                 language= "en",
+                 prompt='rpx',
+                 on_login_failure = None,
+                 ):
+
+        self.request=request
+        self.api_key=api_key
+        self.embed = embed
+        self.auth_url = auth_url
+        self.domain = domain
+        self.token_url = url
+        self.language = language
+        self.profile = None
+        self.prompt = prompt
+        self.on_login_failure = on_login_failure
+        self.mappings = Storage()
+
+        self.mappings.Facebook = lambda profile:\
+            dict(registration_id = profile.get("identifier",""),
+                 username = profile.get("preferredUsername",""),
+                 email = profile.get("email",""),
+                 first_name = profile.get("name","").get("givenName",""),
+                 last_name = profile.get("name","").get("familyName",""))
+        self.mappings.Google = lambda profile:\
+            dict(registration_id=profile.get("identifier",""),
+                 username=profile.get("preferredUsername",""),
+                 email=profile.get("email",""),
+                 first_name=profile.get("name","").get("givenName",""),
+                 last_name=profile.get("name","").get("familyName",""))
+        self.mappings.default = lambda profile:\
+            dict(registration_id=profile.get("identifier",""),
+                 username=profile.get("preferredUsername",""),
+                 email=profile.get("email",""),
+                 first_name=profile.get("preferredUsername",""),
+                 last_name='')
+
+    def get_user(self):
+        request = self.request
+        if request.vars.token:
+            user = Storage()
+            data = urllib.urlencode(dict(apiKey = self.api_key, token=request.vars.token))
+            auth_info_json = fetch(self.auth_url+'?'+data)
+            auth_info = json.loads(auth_info_json)
+
+            if auth_info['stat'] == 'ok':
+                self.profile = auth_info['profile']
+                provider = re.sub('[^\w\-]','',self.profile['providerName'])
+                user = self.mappings.get(provider,self.mappings.default)(self.profile)
+                return user
+            elif self.on_login_failure:
+                redirect(self.on_login_failure)
+        return None
+
+    def login_form(self):
+        request = self.request
+        args = request.args
+        if self.embed:
+           JANRAIN_URL = \
+               "https://%s.rpxnow.com/openid/embed?token_url=%s&language_preference=%s"
+           rpxform = IFRAME(_src=JANRAIN_URL % (self.domain,self.token_url,self.language),
+                            _scrolling="no",
+                            _frameborder="no",
+                            _style="width:400px;height:240px;")
+        else:
+            JANRAIN_URL = \
+                "https://%s.rpxnow.com/openid/v2/signin?token_url=%s"
+            rpxform = DIV(SCRIPT(_src="https://rpxnow.com/openid/v2/widget",
+                                 _type="text/javascript"),
+                          SCRIPT("RPXNOW.overlay = true;",
+                                 "RPXNOW.language_preference = '%s';" % self.language,
+                                 "RPXNOW.realm = '%s';" % self.domain,
+                                 "RPXNOW.token_url = '%s';" % self.token_url,
+                                 "RPXNOW.show();",
+                                 _type="text/javascript"))
+        return rpxform

ADDED   gluon/contrib/markdown/LICENSE
Index: gluon/contrib/markdown/LICENSE
==================================================================
--- /dev/null
+++ gluon/contrib/markdown/LICENSE
@@ -0,0 +1,1 @@
+markdown2.py is released under MIT license.

ADDED   gluon/contrib/markdown/__init__.py
Index: gluon/contrib/markdown/__init__.py
==================================================================
--- /dev/null
+++ gluon/contrib/markdown/__init__.py
@@ -0,0 +1,16 @@
+from markdown2 import *
+from gluon.html import XML
+
+def WIKI(text, encoding="utf8", safe_mode='escape', html4tags=False, **attributes):
+    if not text:
+        test = ''
+    if attributes.has_key('extras'):
+        extras = attributes['extras']
+        del attributes['extras']
+    else:
+        extras=None
+    text = text.decode(encoding,'replace')
+
+    return XML(markdown(text,extras=extras,
+                        safe_mode=safe_mode, html4tags=html4tags)\
+                   .encode(encoding,'xmlcharrefreplace'),**attributes)

ADDED   gluon/contrib/markdown/markdown2.py
Index: gluon/contrib/markdown/markdown2.py
==================================================================
--- /dev/null
+++ gluon/contrib/markdown/markdown2.py
@@ -0,0 +1,1889 @@
+#!/usr/bin/env python
+# Copyright (c) 2007-2008 ActiveState Corp.
+# License: MIT (http://www.opensource.org/licenses/mit-license.php)
+
+r"""A fast and complete Python implementation of Markdown.
+
+[from http://daringfireball.net/projects/markdown/]
+> Markdown is a text-to-HTML filter; it translates an easy-to-read /
+> easy-to-write structured text format into HTML.  Markdown's text
+> format is most similar to that of plain text email, and supports
+> features such as headers, *emphasis*, code blocks, blockquotes, and
+> links.
+>
+> Markdown's syntax is designed not as a generic markup language, but
+> specifically to serve as a front-end to (X)HTML. You can use span-level
+> HTML tags anywhere in a Markdown document, and you can use block level
+> HTML tags (like 
     and  as well).
+
+Module usage:
+
+    >>> import markdown2
+    >>> markdown2.markdown("*boo!*")  # or use `html = markdown_path(PATH)`
+    u'
    boo!
    \n'
+
+    >>> markdowner = Markdown()
+    >>> markdowner.convert("*boo!*")
+    u'
    boo!
    \n'
+    >>> markdowner.convert("**boom!**")
+    u'
    boom!
    \n'
+
+This implementation of Markdown implements the full "core" syntax plus a
+number of extras (e.g., code syntax coloring, footnotes) as described on
+.
+"""
+
+cmdln_desc = """A fast and complete Python implementation of Markdown, a
+text-to-HTML conversion tool for web writers.
+"""
+
+# Dev Notes:
+# - There is already a Python markdown processor
+#   (http://www.freewisdom.org/projects/python-markdown/).
+# - Python's regex syntax doesn't have '\z', so I'm using '\Z'. I'm
+#   not yet sure if there implications with this. Compare 'pydoc sre'
+#   and 'perldoc perlre'.
+
+__version_info__ = (1, 0, 1, 16) # first three nums match Markdown.pl
+__version__ = '1.0.1.16'
+__author__ = "Trent Mick"
+
+import os
+import sys
+from pprint import pprint
+import re
+import logging
+try:
+    from hashlib import md5
+except ImportError:
+    from md5 import md5
+import optparse
+from random import random, randint
+import codecs
+from urllib import quote
+
+
+
+#---- Python version compat
+
+if sys.version_info[:2] < (2,4):
+    from sets import Set as set
+    def reversed(sequence):
+        for i in sequence[::-1]:
+            yield i
+    def _unicode_decode(s, encoding, errors='xmlcharrefreplace'):
+        return unicode(s, encoding, errors)
+else:
+    def _unicode_decode(s, encoding, errors='strict'):
+        return s.decode(encoding, errors)
+
+
+#---- globals
+
+DEBUG = False
+log = logging.getLogger("markdown")
+
+DEFAULT_TAB_WIDTH = 4
+
+
+try:
+    import uuid
+except ImportError:
+    SECRET_SALT = str(randint(0, 1000000))
+else:
+    SECRET_SALT = str(uuid.uuid4())
+def _hash_ascii(s):
+    #return md5(s).hexdigest()   # Markdown.pl effectively does this.
+    return 'md5-' + md5(SECRET_SALT + s).hexdigest()
+def _hash_text(s):
+    return 'md5-' + md5(SECRET_SALT + s.encode("utf-8")).hexdigest()
+
+# Table of hash values for escaped characters:
+g_escape_table = dict([(ch, _hash_ascii(ch))
+                       for ch in '\\`*_{}[]()>#+-.!'])
+
+
+
+#---- exceptions
+
+class MarkdownError(Exception):
+    pass
+
+
+
+#---- public api
+
+def markdown_path(path, encoding="utf-8",
+                  html4tags=False, tab_width=DEFAULT_TAB_WIDTH,
+                  safe_mode=None, extras=None, link_patterns=None,
+                  use_file_vars=False):
+    fp = codecs.open(path, 'r', encoding)
+    try:
+        text = fp.read()
+    finally:
+        fp.close()
+    return Markdown(html4tags=html4tags, tab_width=tab_width,
+                    safe_mode=safe_mode, extras=extras,
+                    link_patterns=link_patterns,
+                    use_file_vars=use_file_vars).convert(text)
+
+def markdown(text, html4tags=False, tab_width=DEFAULT_TAB_WIDTH,
+             safe_mode=None, extras=None, link_patterns=None,
+             use_file_vars=False):
+    return Markdown(html4tags=html4tags, tab_width=tab_width,
+                    safe_mode=safe_mode, extras=extras,
+                    link_patterns=link_patterns,
+                    use_file_vars=use_file_vars).convert(text)
+
+class Markdown(object):
+    # The dict of "extras" to enable in processing -- a mapping of
+    # extra name to argument for the extra. Most extras do not have an
+    # argument, in which case the value is None.
+    #
+    # This can be set via (a) subclassing and (b) the constructor
+    # "extras" argument.
+    extras = None
+
+    urls = None
+    titles = None
+    html_blocks = None
+    html_spans = None
+    html_removed_text = "[HTML_REMOVED]"  # for compat with markdown.py
+
+    # Used to track when we're inside an ordered or unordered list
+    # (see _ProcessListItems() for details):
+    list_level = 0
+
+    _ws_only_line_re = re.compile(r"^[ \t]+$", re.M)
+
+    def __init__(self, html4tags=False, tab_width=4, safe_mode=None,
+                 extras=None, link_patterns=None, use_file_vars=False):
+        if html4tags:
+            self.empty_element_suffix = ">"
+        else:
+            self.empty_element_suffix = " />"
+        self.tab_width = tab_width
+
+        # For compatibility with earlier markdown2.py and with
+        # markdown.py's safe_mode being a boolean,
+        #   safe_mode == True -> "replace"
+        if safe_mode is True:
+            self.safe_mode = "replace"
+        else:
+            self.safe_mode = safe_mode
+
+        if self.extras is None:
+            self.extras = {}
+        elif not isinstance(self.extras, dict):
+            self.extras = dict([(e, None) for e in self.extras])
+        if extras:
+            if not isinstance(extras, dict):
+                extras = dict([(e, None) for e in extras])
+            self.extras.update(extras)
+        assert isinstance(self.extras, dict)
+        self._instance_extras = self.extras.copy()
+        self.link_patterns = link_patterns
+        self.use_file_vars = use_file_vars
+        self._outdent_re = re.compile(r'^(\t|[ ]{1,%d})' % tab_width, re.M)
+
+    def reset(self):
+        self.urls = {}
+        self.titles = {}
+        self.html_blocks = {}
+        self.html_spans = {}
+        self.list_level = 0
+        self.extras = self._instance_extras.copy()
+        if "footnotes" in self.extras:
+            self.footnotes = {}
+            self.footnote_ids = []
+
+    def convert(self, text):
+        """Convert the given text."""
+        # Main function. The order in which other subs are called here is
+        # essential. Link and image substitutions need to happen before
+        # _EscapeSpecialChars(), so that any *'s or _'s in the 
+        # and  tags get encoded.
+
+        # Clear the global hashes. If we don't clear these, you get conflicts
+        # from other articles when generating a page which contains more than
+        # one article (e.g. an index page that shows the N most recent
+        # articles):
+        self.reset()
+
+        if not isinstance(text, unicode):
+            #TODO: perhaps shouldn't presume UTF-8 for string input?
+            text = unicode(text, 'utf-8')
+
+        if self.use_file_vars:
+            # Look for emacs-style file variable hints.
+            emacs_vars = self._get_emacs_vars(text)
+            if "markdown-extras" in emacs_vars:
+                splitter = re.compile("[ ,]+")
+                for e in splitter.split(emacs_vars["markdown-extras"]):
+                    if '=' in e:
+                        ename, earg = e.split('=', 1)
+                        try:
+                            earg = int(earg)
+                        except ValueError:
+                            pass
+                    else:
+                        ename, earg = e, None
+                    self.extras[ename] = earg
+
+        # Standardize line endings:
+        text = re.sub("\r\n|\r", "\n", text)
+
+        # Make sure $text ends with a couple of newlines:
+        text += "\n\n"
+
+        # Convert all tabs to spaces.
+        text = self._detab(text)
+
+        # Strip any lines consisting only of spaces and tabs.
+        # This makes subsequent regexen easier to write, because we can
+        # match consecutive blank lines with /\n+/ instead of something
+        # contorted like /[ \t]*\n+/ .
+        text = self._ws_only_line_re.sub("", text)
+
+        if self.safe_mode:
+            text = self._hash_html_spans(text)
+
+        # Turn block-level HTML blocks into hash entries
+        text = self._hash_html_blocks(text, raw=True)
+
+        # Strip link definitions, store in hashes.
+        if "footnotes" in self.extras:
+            # Must do footnotes first because an unlucky footnote defn
+            # looks like a link defn:
+            #   [^4]: this "looks like a link defn"
+            text = self._strip_footnote_definitions(text)
+        text = self._strip_link_definitions(text)
+
+        text = self._run_block_gamut(text)
+
+        if "footnotes" in self.extras:
+            text = self._add_footnotes(text)
+
+        text = self._unescape_special_chars(text)
+
+        if self.safe_mode:
+            text = self._unhash_html_spans(text)
+
+        text += "\n"
+        return text
+
+    _emacs_oneliner_vars_pat = re.compile(r"-\*-\s*([^\r\n]*?)\s*-\*-", re.UNICODE)
+    # This regular expression is intended to match blocks like this:
+    #    PREFIX Local Variables: SUFFIX
+    #    PREFIX mode: Tcl SUFFIX
+    #    PREFIX End: SUFFIX
+    # Some notes:
+    # - "[ \t]" is used instead of "\s" to specifically exclude newlines
+    # - "(\r\n|\n|\r)" is used instead of "$" because the sre engine does
+    #   not like anything other than Unix-style line terminators.
+    _emacs_local_vars_pat = re.compile(r"""^
+        (?P(?:[^\r\n|\n|\r])*?)
+        [\ \t]*Local\ Variables:[\ \t]*
+        (?P.*?)(?:\r\n|\n|\r)
+        (?P.*?\1End:)
+        """, re.IGNORECASE | re.MULTILINE | re.DOTALL | re.VERBOSE)
+
+    def _get_emacs_vars(self, text):
+        """Return a dictionary of emacs-style local variables.
+
+        Parsing is done loosely according to this spec (and according to
+        some in-practice deviations from this):
+        http://www.gnu.org/software/emacs/manual/html_node/emacs/Specifying-File-Variables.html#Specifying-File-Variables
+        """
+        emacs_vars = {}
+        SIZE = pow(2, 13) # 8kB
+
+        # Search near the start for a '-*-'-style one-liner of variables.
+        head = text[:SIZE]
+        if "-*-" in head:
+            match = self._emacs_oneliner_vars_pat.search(head)
+            if match:
+                emacs_vars_str = match.group(1)
+                assert '\n' not in emacs_vars_str
+                emacs_var_strs = [s.strip() for s in emacs_vars_str.split(';')
+                                  if s.strip()]
+                if len(emacs_var_strs) == 1 and ':' not in emacs_var_strs[0]:
+                    # While not in the spec, this form is allowed by emacs:
+                    #   -*- Tcl -*-
+                    # where the implied "variable" is "mode". This form
+                    # is only allowed if there are no other variables.
+                    emacs_vars["mode"] = emacs_var_strs[0].strip()
+                else:
+                    for emacs_var_str in emacs_var_strs:
+                        try:
+                            variable, value = emacs_var_str.strip().split(':', 1)
+                        except ValueError:
+                            log.debug("emacs variables error: malformed -*- "
+                                      "line: %r", emacs_var_str)
+                            continue
+                        # Lowercase the variable name because Emacs allows "Mode"
+                        # or "mode" or "MoDe", etc.
+                        emacs_vars[variable.lower()] = value.strip()
+
+        tail = text[-SIZE:]
+        if "Local Variables" in tail:
+            match = self._emacs_local_vars_pat.search(tail)
+            if match:
+                prefix = match.group("prefix")
+                suffix = match.group("suffix")
+                lines = match.group("content").splitlines(0)
+                #print "prefix=%r, suffix=%r, content=%r, lines: %s"\
+                #      % (prefix, suffix, match.group("content"), lines)
+
+                # Validate the Local Variables block: proper prefix and suffix
+                # usage.
+                for i, line in enumerate(lines):
+                    if not line.startswith(prefix):
+                        log.debug("emacs variables error: line '%s' "
+                                  "does not use proper prefix '%s'"
+                                  % (line, prefix))
+                        return {}
+                    # Don't validate suffix on last line. Emacs doesn't care,
+                    # neither should we.
+                    if i != len(lines)-1 and not line.endswith(suffix):
+                        log.debug("emacs variables error: line '%s' "
+                                  "does not use proper suffix '%s'"
+                                  % (line, suffix))
+                        return {}
+
+                # Parse out one emacs var per line.
+                continued_for = None
+                for line in lines[:-1]: # no var on the last line ("PREFIX End:")
+                    if prefix: line = line[len(prefix):] # strip prefix
+                    if suffix: line = line[:-len(suffix)] # strip suffix
+                    line = line.strip()
+                    if continued_for:
+                        variable = continued_for
+                        if line.endswith('\\'):
+                            line = line[:-1].rstrip()
+                        else:
+                            continued_for = None
+                        emacs_vars[variable] += ' ' + line
+                    else:
+                        try:
+                            variable, value = line.split(':', 1)
+                        except ValueError:
+                            log.debug("local variables error: missing colon "
+                                      "in local variables entry: '%s'" % line)
+                            continue
+                        # Do NOT lowercase the variable name, because Emacs only
+                        # allows "mode" (and not "Mode", "MoDe", etc.) in this block.
+                        value = value.strip()
+                        if value.endswith('\\'):
+                            value = value[:-1].rstrip()
+                            continued_for = variable
+                        else:
+                            continued_for = None
+                        emacs_vars[variable] = value
+
+        # Unquote values.
+        for var, val in emacs_vars.items():
+            if len(val) > 1 and (val.startswith('"') and val.endswith('"')
+               or val.startswith('"') and val.endswith('"')):
+                emacs_vars[var] = val[1:-1]
+
+        return emacs_vars
+
+    # Cribbed from a post by Bart Lateur:
+    # 
+    _detab_re = re.compile(r'(.*?)\t', re.M)
+    def _detab_sub(self, match):
+        g1 = match.group(1)
+        return g1 + (' ' * (self.tab_width - len(g1) % self.tab_width))
+    def _detab(self, text):
+        r"""Remove (leading?) tabs from a file.
+
+            >>> m = Markdown()
+            >>> m._detab("\tfoo")
+            '    foo'
+            >>> m._detab("  \tfoo")
+            '    foo'
+            >>> m._detab("\t  foo")
+            '      foo'
+            >>> m._detab("  foo")
+            '  foo'
+            >>> m._detab("  foo\n\tbar\tblam")
+            '  foo\n    bar blam'
+        """
+        if '\t' not in text:
+            return text
+        return self._detab_re.subn(self._detab_sub, text)[0]
+
+    _block_tags_a = 'p|div|h[1-6]|blockquote|pre|table|dl|ol|ul|script|noscript|form|fieldset|iframe|math|ins|del'
+    _strict_tag_block_re = re.compile(r"""
+        (                       # save in \1
+            ^                   # start of line  (with re.M)
+            <(%s)               # start tag = \2
+            \b                  # word break
+            (.*\n)*?            # any number of lines, minimally matching
+                           # the matching end tag
+            [ \t]*              # trailing spaces/tabs
+            (?=\n+|\Z)          # followed by a newline or end of document
+        )
+        """ % _block_tags_a,
+        re.X | re.M)
+
+    _block_tags_b = 'p|div|h[1-6]|blockquote|pre|table|dl|ol|ul|script|noscript|form|fieldset|iframe|math'
+    _liberal_tag_block_re = re.compile(r"""
+        (                       # save in \1
+            ^                   # start of line  (with re.M)
+            <(%s)               # start tag = \2
+            \b                  # word break
+            (.*\n)*?            # any number of lines, minimally matching
+            .*             # the matching end tag
+            [ \t]*              # trailing spaces/tabs
+            (?=\n+|\Z)          # followed by a newline or end of document
+        )
+        """ % _block_tags_b,
+        re.X | re.M)
+
+    def _hash_html_block_sub(self, match, raw=False):
+        html = match.group(1)
+        if raw and self.safe_mode:
+            html = self._sanitize_html(html)
+        key = _hash_text(html)
+        self.html_blocks[key] = html
+        return "\n\n" + key + "\n\n"
+
+    def _hash_html_blocks(self, text, raw=False):
+        """Hashify HTML blocks
+
+        We only want to do this for block-level HTML tags, such as headers,
+        lists, and tables. That's because we still want to wrap 
    s around
+        "paragraphs" that are wrapped in non-block-level tags, such as anchors,
+        phrase emphasis, and spans. The list of tags we're looking for is
+        hard-coded.
+
+        @param raw {boolean} indicates if these are raw HTML blocks in
+            the original source. It makes a difference in "safe" mode.
+        """
+        if '<' not in text:
+            return text
+
+        # Pass `raw` value into our calls to self._hash_html_block_sub.
+        hash_html_block_sub = _curry(self._hash_html_block_sub, raw=raw)
+
+        # First, look for nested blocks, e.g.:
+        #   
    
+        #       
    
+        #       tags for inner block must be indented.
+        #       
    
+        #   
    
+        #
+        # The outermost tags must start at the left margin for this to match, and
+        # the inner nested divs must be indented.
+        # We need to do this before the next, more liberal match, because the next
+        # match will start at the first `
    ` and stop at the first `
    `.
+        text = self._strict_tag_block_re.sub(hash_html_block_sub, text)
+
+        # Now match more liberally, simply from `\n` to `\n`
+        text = self._liberal_tag_block_re.sub(hash_html_block_sub, text)
+
+        # Special case just for 
    . It was easier to make a special
+        # case than to make the other regex more complicated.
+        if "", start_idx) + 3
+                except ValueError, ex:
+                    break
+
+                # Start position for next comment block search.
+                start = end_idx
+
+                # Validate whitespace before comment.
+                if start_idx:
+                    # - Up to `tab_width - 1` spaces before start_idx.
+                    for i in range(self.tab_width - 1):
+                        if text[start_idx - 1] != ' ':
+                            break
+                        start_idx -= 1
+                        if start_idx == 0:
+                            break
+                    # - Must be preceded by 2 newlines or hit the start of
+                    #   the document.
+                    if start_idx == 0:
+                        pass
+                    elif start_idx == 1 and text[0] == '\n':
+                        start_idx = 0  # to match minute detail of Markdown.pl regex
+                    elif text[start_idx-2:start_idx] == '\n\n':
+                        pass
+                    else:
+                        break
+
+                # Validate whitespace after comment.
+                # - Any number of spaces and tabs.
+                while end_idx < len(text):
+                    if text[end_idx] not in ' \t':
+                        break
+                    end_idx += 1
+                # - Must be following by 2 newlines or hit end of text.
+                if text[end_idx:end_idx+2] not in ('', '\n', '\n\n'):
+                    continue
+
+                # Escape and hash (must match `_hash_html_block_sub`).
+                html = text[start_idx:end_idx]
+                if raw and self.safe_mode:
+                    html = self._sanitize_html(html)
+                key = _hash_text(html)
+                self.html_blocks[key] = html
+                text = text[:start_idx] + "\n\n" + key + "\n\n" + text[end_idx:]
+
+        if "xml" in self.extras:
+            # Treat XML processing instructions and namespaced one-liner
+            # tags as if they were block HTML tags. E.g., if standalone
+            # (i.e. are their own paragraph), the following do not get
+            # wrapped in a 
     tag:
+            #    
+            #
+            #    
+            _xml_oneliner_re = _xml_oneliner_re_from_tab_width(self.tab_width)
+            text = _xml_oneliner_re.sub(hash_html_block_sub, text)
+
+        return text
+
+    def _strip_link_definitions(self, text):
+        # Strips link definitions from text, stores the URLs and titles in
+        # hash references.
+        less_than_tab = self.tab_width - 1
+
+        # Link defs are in the form:
+        #   [id]: url "optional title"
+        _link_def_re = re.compile(r"""
+            ^[ ]{0,%d}\[(.+)\]: # id = \1
+              [ \t]*
+              \n?               # maybe *one* newline
+              [ \t]*
+            ?           # url = \2
+              [ \t]*
+            (?:
+                \n?             # maybe one newline
+                [ \t]*
+                (?<=\s)         # lookbehind for whitespace
+                ['"(]
+                ([^\n]*)        # title = \3
+                ['")]
+                [ \t]*
+            )?  # title is optional
+            (?:\n+|\Z)
+            """ % less_than_tab, re.X | re.M | re.U)
+        return _link_def_re.sub(self._extract_link_def_sub, text)
+
+    def _extract_link_def_sub(self, match):
+        id, url, title = match.groups()
+        key = id.lower()    # Link IDs are case-insensitive
+        self.urls[key] = self._encode_amps_and_angles(url)
+        if title:
+            self.titles[key] = title.replace('"', '"')
+        return ""
+
+    def _extract_footnote_def_sub(self, match):
+        id, text = match.groups()
+        text = _dedent(text, skip_first_line=not text.startswith('\n')).strip()
+        normed_id = re.sub(r'\W', '-', id)
+        # Ensure footnote text ends with a couple newlines (for some
+        # block gamut matches).
+        self.footnotes[normed_id] = text + "\n\n"
+        return ""
+
+    def _strip_footnote_definitions(self, text):
+        """A footnote definition looks like this:
+
+            [^note-id]: Text of the note.
+
+                May include one or more indented paragraphs.
+
+        Where,
+        - The 'note-id' can be pretty much anything, though typically it
+          is the number of the footnote.
+        - The first paragraph may start on the next line, like so:
+
+            [^note-id]:
+                Text of the note.
+        """
+        less_than_tab = self.tab_width - 1
+        footnote_def_re = re.compile(r'''
+            ^[ ]{0,%d}\[\^(.+)\]:   # id = \1
+            [ \t]*
+            (                       # footnote text = \2
+              # First line need not start with the spaces.
+              (?:\s*.*\n+)
+              (?:
+                (?:[ ]{%d} | \t)  # Subsequent lines must be indented.
+                .*\n+
+              )*
+            )
+            # Lookahead for non-space at line-start, or end of doc.
+            (?:(?=^[ ]{0,%d}\S)|\Z)
+            ''' % (less_than_tab, self.tab_width, self.tab_width),
+            re.X | re.M)
+        return footnote_def_re.sub(self._extract_footnote_def_sub, text)
+
+
+    _hr_res = [
+        re.compile(r"^[ ]{0,2}([ ]?\*[ ]?){3,}[ \t]*$", re.M),
+        re.compile(r"^[ ]{0,2}([ ]?\-[ ]?){3,}[ \t]*$", re.M),
+        re.compile(r"^[ ]{0,2}([ ]?\_[ ]?){3,}[ \t]*$", re.M),
+    ]
+
+    def _run_block_gamut(self, text):
+        # These are all the transformations that form block-level
+        # tags like paragraphs, headers, and list items.
+
+        text = self._do_headers(text)
+
+        # Do Horizontal Rules:
+        hr = "\n tags around block-level tags.
+        text = self._hash_html_blocks(text)
+
+        text = self._form_paragraphs(text)
+
+        return text
+
+    def _pyshell_block_sub(self, match):
+        lines = match.group(0).splitlines(0)
+        _dedentlines(lines)
+        indent = ' ' * self.tab_width
+        s = ('\n' # separate from possible cuddled paragraph
+             + indent + ('\n'+indent).join(lines)
+             + '\n\n')
+        return s
+
+    def _prepare_pyshell_blocks(self, text):
+        """Ensure that Python interactive shell sessions are put in
+        code blocks -- even if not properly indented.
+        """
+        if ">>>" not in text:
+            return text
+
+        less_than_tab = self.tab_width - 1
+        _pyshell_block_re = re.compile(r"""
+            ^([ ]{0,%d})>>>[ ].*\n   # first line
+            ^(\1.*\S+.*\n)*         # any number of subsequent lines
+            ^\n                     # ends with a blank line
+            """ % less_than_tab, re.M | re.X)
+
+        return _pyshell_block_re.sub(self._pyshell_block_sub, text)
+
+    def _run_span_gamut(self, text):
+        # These are all the transformations that occur *within* block-level
+        # tags like paragraphs, headers, and list items.
+
+        text = self._do_code_spans(text)
+
+        text = self._escape_special_chars(text)
+
+        # Process anchor and image tags.
+        text = self._do_links(text)
+
+        # Make links out of things like ``
+        # Must come after _do_links(), because you can use < and >
+        # delimiters in inline links like [this]().
+        text = self._do_auto_links(text)
+
+        if "link-patterns" in self.extras:
+            text = self._do_link_patterns(text)
+
+        text = self._encode_amps_and_angles(text)
+
+        text = self._do_italics_and_bold(text)
+
+        # Do hard breaks:
+        text = re.sub(r" {2,}\n", " 
+            |
+            # auto-link (e.g., )
+            <\w+[^>]*>
+            |
+                  # comment
+            |
+            <\?.*?\?>       # processing instruction
+        )
+        """, re.X)
+
+    def _escape_special_chars(self, text):
+        # Python markdown note: the HTML tokenization here differs from
+        # that in Markdown.pl, hence the behaviour for subtle cases can
+        # differ (I believe the tokenizer here does a better job because
+        # it isn't susceptible to unmatched '<' and '>' in HTML tags).
+        # Note, however, that '>' is not allowed in an auto-link URL
+        # here.
+        escaped = []
+        is_html_markup = False
+        for token in self._sorta_html_tokenize_re.split(text):
+            if is_html_markup:
+                # Within tags/HTML-comments/auto-links, encode * and _
+                # so they don't conflict with their use in Markdown for
+                # italics and strong.  We're replacing each such
+                # character with its corresponding MD5 checksum value;
+                # this is likely overkill, but it should prevent us from
+                # colliding with the escape values by accident.
+                escaped.append(token.replace('*', g_escape_table['*'])
+                                    .replace('_', g_escape_table['_']))
+            else:
+                escaped.append(self._encode_backslash_escapes(token))
+            is_html_markup = not is_html_markup
+        return ''.join(escaped)
+
+    def _hash_html_spans(self, text):
+        # Used for safe_mode.
+
+        def _is_auto_link(s):
+            if ':' in s and self._auto_link_re.match(s):
+                return True
+            elif '@' in s and self._auto_email_link_re.match(s):
+                return True
+            return False
+
+        tokens = []
+        is_html_markup = False
+        for token in self._sorta_html_tokenize_re.split(text):
+            if is_html_markup and not _is_auto_link(token):
+                sanitized = self._sanitize_html(token)
+                key = _hash_text(sanitized)
+                self.html_spans[key] = sanitized
+                tokens.append(key)
+            else:
+                tokens.append(token)
+            is_html_markup = not is_html_markup
+        return ''.join(tokens)
+
+    def _unhash_html_spans(self, text):
+        for key, sanitized in self.html_spans.items():
+            text = text.replace(key, sanitized)
+        return text
+
+    def _sanitize_html(self, s):
+        if self.safe_mode == "replace":
+            return self.html_removed_text
+        elif self.safe_mode == "escape":
+            replacements = [
+                ('&', '&'),
+                ('<', '<'),
+                ('>', '>'),
+            ]
+            for before, after in replacements:
+                s = s.replace(before, after)
+            return s
+        else:
+            raise MarkdownError("invalid value for 'safe_mode': %r (must be "
+                                "'escape' or 'replace')" % self.safe_mode)
+
+    _tail_of_inline_link_re = re.compile(r'''
+          # Match tail of: [text](/url/) or [text](/url/ "title")
+          \(            # literal paren
+            [ \t]*
+            (?P            # \1
+                <.*?>
+                |
+                .*?
+            )
+            [ \t]*
+            (                   # \2
+              (['"])            # quote char = \3
+              (?P.*?)
+              \3                # matching quote
+            )?                  # title is optional
+          \)
+        ''', re.X | re.S)
+    _tail_of_reference_link_re = re.compile(r'''
+          # Match tail of: [text][id]
+          [ ]?          # one optional space
+          (?:\n[ ]*)?   # one optional newline followed by spaces
+          \[
+            (?P<id>.*?)
+          \]
+        ''', re.X | re.S)
+
+    def _do_links(self, text):
+        """Turn Markdown link shortcuts into XHTML <a> and <img> tags.
+
+        This is a combination of Markdown.pl's _DoAnchors() and
+        _DoImages(). They are done together because that simplified the
+        approach. It was necessary to use a different approach than
+        Markdown.pl because of the lack of atomic matching support in
+        Python's regex engine used in $g_nested_brackets.
+        """
+        MAX_LINK_TEXT_SENTINEL = 3000  # markdown2 issue 24
+
+        # `anchor_allowed_pos` is used to support img links inside
+        # anchors, but not anchors inside anchors. An anchor's start
+        # pos must be `>= anchor_allowed_pos`.
+        anchor_allowed_pos = 0
+
+        curr_pos = 0
+        while True: # Handle the next link.
+            # The next '[' is the start of:
+            # - an inline anchor:   [text](url "title")
+            # - a reference anchor: [text][id]
+            # - an inline img:      ![text](url "title")
+            # - a reference img:    ![text][id]
+            # - a footnote ref:     [^id]
+            #   (Only if 'footnotes' extra enabled)
+            # - a footnote defn:    [^id]: ...
+            #   (Only if 'footnotes' extra enabled) These have already
+            #   been stripped in _strip_footnote_definitions() so no
+            #   need to watch for them.
+            # - a link definition:  [id]: url "title"
+            #   These have already been stripped in
+            #   _strip_link_definitions() so no need to watch for them.
+            # - not markup:         [...anything else...
+            try:
+                start_idx = text.index('[', curr_pos)
+            except ValueError:
+                break
+            text_length = len(text)
+
+            # Find the matching closing ']'.
+            # Markdown.pl allows *matching* brackets in link text so we
+            # will here too. Markdown.pl *doesn't* currently allow
+            # matching brackets in img alt text -- we'll differ in that
+            # regard.
+            bracket_depth = 0
+            for p in range(start_idx+1, min(start_idx+MAX_LINK_TEXT_SENTINEL,
+                                            text_length)):
+                ch = text[p]
+                if ch == ']':
+                    bracket_depth -= 1
+                    if bracket_depth < 0:
+                        break
+                elif ch == '[':
+                    bracket_depth += 1
+            else:
+                # Closing bracket not found within sentinel length.
+                # This isn't markup.
+                curr_pos = start_idx + 1
+                continue
+            link_text = text[start_idx+1:p]
+
+            # Possibly a footnote ref?
+            if "footnotes" in self.extras and link_text.startswith("^"):
+                normed_id = re.sub(r'\W', '-', link_text[1:])
+                if normed_id in self.footnotes:
+                    self.footnote_ids.append(normed_id)
+                    result = '<sup class="footnote-ref" id="fnref-%s">' \
+                             '<a href="#fn-%s">%s</a></sup>' \
+                             % (normed_id, normed_id, len(self.footnote_ids))
+                    text = text[:start_idx] + result + text[p+1:]
+                else:
+                    # This id isn't defined, leave the markup alone.
+                    curr_pos = p+1
+                continue
+
+            # Now determine what this is by the remainder.
+            p += 1
+            if p == text_length:
+                return text
+
+            # Inline anchor or img?
+            if text[p] == '(': # attempt at perf improvement
+                match = self._tail_of_inline_link_re.match(text, p)
+                if match:
+                    # Handle an inline anchor or img.
+                    is_img = start_idx > 0 and text[start_idx-1] == "!"
+                    if is_img:
+                        start_idx -= 1
+
+                    url, title = match.group("url"), match.group("title")
+                    if url and url[0] == '<':
+                        url = url[1:-1]  # '<url>' -> 'url'
+                    # We've got to encode these to avoid conflicting
+                    # with italics/bold.
+                    url = url.replace('*', g_escape_table['*']) \
+                             .replace('_', g_escape_table['_'])
+                    if title:
+                        title_str = ' title="%s"' \
+                            % title.replace('*', g_escape_table['*']) \
+                                   .replace('_', g_escape_table['_']) \
+                                   .replace('"', '"')
+                    else:
+                        title_str = ''
+                    if is_img:
+                        result = '<img src="%s" alt="%s"%s%s' \
+                            % (url.replace('"', '"'),
+                               link_text.replace('"', '"'),
+                               title_str, self.empty_element_suffix)
+                        curr_pos = start_idx + len(result)
+                        text = text[:start_idx] + result + text[match.end():]
+                    elif start_idx >= anchor_allowed_pos:
+                        result_head = '<a href="%s"%s>' % (url, title_str)
+                        result = '%s%s</a>' % (result_head, link_text)
+                        # <img> allowed from curr_pos on, <a> from
+                        # anchor_allowed_pos on.
+                        curr_pos = start_idx + len(result_head)
+                        anchor_allowed_pos = start_idx + len(result)
+                        text = text[:start_idx] + result + text[match.end():]
+                    else:
+                        # Anchor not allowed here.
+                        curr_pos = start_idx + 1
+                    continue
+
+            # Reference anchor or img?
+            else:
+                match = self._tail_of_reference_link_re.match(text, p)
+                if match:
+                    # Handle a reference-style anchor or img.
+                    is_img = start_idx > 0 and text[start_idx-1] == "!"
+                    if is_img:
+                        start_idx -= 1
+                    link_id = match.group("id").lower()
+                    if not link_id:
+                        link_id = link_text.lower()  # for links like [this][]
+                    if link_id in self.urls:
+                        url = self.urls[link_id]
+                        # We've got to encode these to avoid conflicting
+                        # with italics/bold.
+                        url = url.replace('*', g_escape_table['*']) \
+                                 .replace('_', g_escape_table['_'])
+                        title = self.titles.get(link_id)
+                        if title:
+                            title = title.replace('*', g_escape_table['*']) \
+                                         .replace('_', g_escape_table['_'])
+                            title_str = ' title="%s"' % title
+                        else:
+                            title_str = ''
+                        if is_img:
+                            result = '<img src="%s" alt="%s"%s%s' \
+                                % (url.replace('"', '"'),
+                                   link_text.replace('"', '"'),
+                                   title_str, self.empty_element_suffix)
+                            curr_pos = start_idx + len(result)
+                            text = text[:start_idx] + result + text[match.end():]
+                        elif start_idx >= anchor_allowed_pos:
+                            result = '<a href="%s"%s>%s</a>' \
+                                % (url, title_str, link_text)
+                            result_head = '<a href="%s"%s>' % (url, title_str)
+                            result = '%s%s</a>' % (result_head, link_text)
+                            # <img> allowed from curr_pos on, <a> from
+                            # anchor_allowed_pos on.
+                            curr_pos = start_idx + len(result_head)
+                            anchor_allowed_pos = start_idx + len(result)
+                            text = text[:start_idx] + result + text[match.end():]
+                        else:
+                            # Anchor not allowed here.
+                            curr_pos = start_idx + 1
+                    else:
+                        # This id isn't defined, leave the markup alone.
+                        curr_pos = match.end()
+                    continue
+
+            # Otherwise, it isn't markup.
+            curr_pos = start_idx + 1
+
+        return text
+
+
+    _setext_h_re = re.compile(r'^(.+)[ \t]*\n(=+|-+)[ \t]*\n+', re.M)
+    def _setext_h_sub(self, match):
+        n = {"=": 1, "-": 2}[match.group(2)[0]]
+        demote_headers = self.extras.get("demote-headers")
+        if demote_headers:
+            n = min(n + demote_headers, 6)
+        return "<h%d>%s</h%d>\n\n" \
+               % (n, self._run_span_gamut(match.group(1)), n)
+
+    _atx_h_re = re.compile(r'''
+        ^(\#{1,6})  # \1 = string of #'s
+        [ \t]*
+        (.+?)       # \2 = Header text
+        [ \t]*
+        (?<!\\)     # ensure not an escaped trailing '#'
+        \#*         # optional closing #'s (not counted)
+        \n+
+        ''', re.X | re.M)
+    def _atx_h_sub(self, match):
+        n = len(match.group(1))
+        demote_headers = self.extras.get("demote-headers")
+        if demote_headers:
+            n = min(n + demote_headers, 6)
+        return "<h%d>%s</h%d>\n\n" \
+               % (n, self._run_span_gamut(match.group(2)), n)
+
+    def _do_headers(self, text):
+        # Setext-style headers:
+        #     Header 1
+        #     ========
+        #
+        #     Header 2
+        #     --------
+        text = self._setext_h_re.sub(self._setext_h_sub, text)
+
+        # atx-style headers:
+        #   # Header 1
+        #   ## Header 2
+        #   ## Header 2 with closing hashes ##
+        #   ...
+        #   ###### Header 6
+        text = self._atx_h_re.sub(self._atx_h_sub, text)
+
+        return text
+
+
+    _marker_ul_chars  = '*+-'
+    _marker_any = r'(?:[%s]|\d+\.)' % _marker_ul_chars
+    _marker_ul = '(?:[%s])' % _marker_ul_chars
+    _marker_ol = r'(?:\d+\.)'
+
+    def _list_sub(self, match):
+        lst = match.group(1)
+        lst_type = match.group(3) in self._marker_ul_chars and "ul" or "ol"
+        result = self._process_list_items(lst)
+        if self.list_level:
+            return "<%s>\n%s</%s>\n" % (lst_type, result, lst_type)
+        else:
+            return "<%s>\n%s</%s>\n\n" % (lst_type, result, lst_type)
+
+    def _do_lists(self, text):
+        # Form HTML ordered (numbered) and unordered (bulleted) lists.
+
+        for marker_pat in (self._marker_ul, self._marker_ol):
+            # Re-usable pattern to match any entire ul or ol list:
+            less_than_tab = self.tab_width - 1
+            whole_list = r'''
+                (                   # \1 = whole list
+                  (                 # \2
+                    [ ]{0,%d}
+                    (%s)            # \3 = first list item marker
+                    [ \t]+
+                  )
+                  (?:.+?)
+                  (                 # \4
+                      \Z
+                    |
+                      \n{2,}
+                      (?=\S)
+                      (?!           # Negative lookahead for another list item marker
+                        [ \t]*
+                        %s[ \t]+
+                      )
+                  )
+                )
+            ''' % (less_than_tab, marker_pat, marker_pat)
+
+            # We use a different prefix before nested lists than top-level lists.
+            # See extended comment in _process_list_items().
+            #
+            # Note: There's a bit of duplication here. My original implementation
+            # created a scalar regex pattern as the conditional result of the test on
+            # $g_list_level, and then only ran the $text =~ s{...}{...}egmx
+            # substitution once, using the scalar as the pattern. This worked,
+            # everywhere except when running under MT on my hosting account at Pair
+            # Networks. There, this caused all rebuilds to be killed by the reaper (or
+            # perhaps they crashed, but that seems incredibly unlikely given that the
+            # same script on the same server ran fine *except* under MT. I've spent
+            # more time trying to figure out why this is happening than I'd like to
+            # admit. My only guess, backed up by the fact that this workaround works,
+            # is that Perl optimizes the substition when it can figure out that the
+            # pattern will never change, and when this optimization isn't on, we run
+            # afoul of the reaper. Thus, the slightly redundant code to that uses two
+            # static s/// patterns rather than one conditional pattern.
+
+            if self.list_level:
+                sub_list_re = re.compile("^"+whole_list, re.X | re.M | re.S)
+                text = sub_list_re.sub(self._list_sub, text)
+            else:
+                list_re = re.compile(r"(?:(?<=\n\n)|\A\n?)"+whole_list,
+                                     re.X | re.M | re.S)
+                text = list_re.sub(self._list_sub, text)
+
+        return text
+
+    _list_item_re = re.compile(r'''
+        (\n)?               # leading line = \1
+        (^[ \t]*)           # leading whitespace = \2
+        (%s) [ \t]+         # list marker = \3
+        ((?:.+?)            # list item text = \4
+         (\n{1,2}))         # eols = \5
+        (?= \n* (\Z | \2 (%s) [ \t]+))
+        ''' % (_marker_any, _marker_any),
+        re.M | re.X | re.S)
+
+    _last_li_endswith_two_eols = False
+    def _list_item_sub(self, match):
+        item = match.group(4)
+        leading_line = match.group(1)
+        leading_space = match.group(2)
+        if leading_line or "\n\n" in item or self._last_li_endswith_two_eols:
+            item = self._run_block_gamut(self._outdent(item))
+        else:
+            # Recursion for sub-lists:
+            item = self._do_lists(self._outdent(item))
+            if item.endswith('\n'):
+                item = item[:-1]
+            item = self._run_span_gamut(item)
+        self._last_li_endswith_two_eols = (len(match.group(5)) == 2)
+        return "<li>%s</li>\n" % item
+
+    def _process_list_items(self, list_str):
+        # Process the contents of a single ordered or unordered list,
+        # splitting it into individual list items.
+
+        # The $g_list_level global keeps track of when we're inside a list.
+        # Each time we enter a list, we increment it; when we leave a list,
+        # we decrement. If it's zero, we're not in a list anymore.
+        #
+        # We do this because when we're not inside a list, we want to treat
+        # something like this:
+        #
+        #       I recommend upgrading to version
+        #       8. Oops, now this line is treated
+        #       as a sub-list.
+        #
+        # As a single paragraph, despite the fact that the second line starts
+        # with a digit-period-space sequence.
+        #
+        # Whereas when we're inside a list (or sub-list), that line will be
+        # treated as the start of a sub-list. What a kludge, huh? This is
+        # an aspect of Markdown's syntax that's hard to parse perfectly
+        # without resorting to mind-reading. Perhaps the solution is to
+        # change the syntax rules such that sub-lists must start with a
+        # starting cardinal number; e.g. "1." or "a.".
+        self.list_level += 1
+        self._last_li_endswith_two_eols = False
+        list_str = list_str.rstrip('\n') + '\n'
+        list_str = self._list_item_re.sub(self._list_item_sub, list_str)
+        self.list_level -= 1
+        return list_str
+
+    def _get_pygments_lexer(self, lexer_name):
+        try:
+            from pygments import lexers, util
+        except ImportError:
+            return None
+        try:
+            return lexers.get_lexer_by_name(lexer_name)
+        except util.ClassNotFound:
+            return None
+
+    def _color_with_pygments(self, codeblock, lexer, **formatter_opts):
+        import pygments
+        import pygments.formatters
+
+        class HtmlCodeFormatter(pygments.formatters.HtmlFormatter):
+            def _wrap_code(self, inner):
+                """A function for use in a Pygments Formatter which
+                wraps in <code> tags.
+                """
+                yield 0, "<code>"
+                for tup in inner:
+                    yield tup
+                yield 0, "</code>"
+
+            def wrap(self, source, outfile):
+                """Return the source with a code, pre, and div."""
+                return self._wrap_div(self._wrap_pre(self._wrap_code(source)))
+
+        formatter = HtmlCodeFormatter(cssclass="codehilite", **formatter_opts)
+        return pygments.highlight(codeblock, lexer, formatter)
+
+    def _code_block_sub(self, match):
+        codeblock = match.group(1)
+        codeblock = self._outdent(codeblock)
+        codeblock = self._detab(codeblock)
+        codeblock = codeblock.lstrip('\n')  # trim leading newlines
+        codeblock = codeblock.rstrip()      # trim trailing whitespace
+
+        if "code-color" in self.extras and codeblock.startswith(":::"):
+            lexer_name, rest = codeblock.split('\n', 1)
+            lexer_name = lexer_name[3:].strip()
+            lexer = self._get_pygments_lexer(lexer_name)
+            codeblock = rest.lstrip("\n")   # Remove lexer declaration line.
+            if lexer:
+                formatter_opts = self.extras['code-color'] or {}
+                colored = self._color_with_pygments(codeblock, lexer,
+                                                    **formatter_opts)
+                return "\n\n%s\n\n" % colored
+
+        codeblock = self._encode_code(codeblock)
+        return "\n\n<pre><code>%s\n</code></pre>\n\n" % codeblock
+
+    def _do_code_blocks(self, text):
+        """Process Markdown `<pre><code>` blocks."""
+        code_block_re = re.compile(r'''
+            (?:\n\n|\A)
+            (               # $1 = the code block -- one or more lines, starting with a space/tab
+              (?:
+                (?:[ ]{%d} | \t)  # Lines must start with a tab or a tab-width of spaces
+                .*\n+
+              )+
+            )
+            ((?=^[ ]{0,%d}\S)|\Z)   # Lookahead for non-space at line-start, or end of doc
+            ''' % (self.tab_width, self.tab_width),
+            re.M | re.X)
+
+        return code_block_re.sub(self._code_block_sub, text)
+
+
+    # Rules for a code span:
+    # - backslash escapes are not interpreted in a code span
+    # - to include one or or a run of more backticks the delimiters must
+    #   be a longer run of backticks
+    # - cannot start or end a code span with a backtick; pad with a
+    #   space and that space will be removed in the emitted HTML
+    # See `test/tm-cases/escapes.text` for a number of edge-case
+    # examples.
+    _code_span_re = re.compile(r'''
+            (?<!\\)
+            (`+)        # \1 = Opening run of `
+            (?!`)       # See Note A test/tm-cases/escapes.text
+            (.+?)       # \2 = The code block
+            (?<!`)
+            \1          # Matching closer
+            (?!`)
+        ''', re.X | re.S)
+
+    def _code_span_sub(self, match):
+        c = match.group(2).strip(" \t")
+        c = self._encode_code(c)
+        return "<code>%s</code>" % c
+
+    def _do_code_spans(self, text):
+        #   *   Backtick quotes are used for <code></code> spans.
+        #
+        #   *   You can use multiple backticks as the delimiters if you want to
+        #       include literal backticks in the code span. So, this input:
+        #
+        #         Just type ``foo `bar` baz`` at the prompt.
+        #
+        #       Will translate to:
+        #
+        #         <p>Just type <code>foo `bar` baz</code> at the prompt.</p>
+        #
+        #       There's no arbitrary limit to the number of backticks you
+        #       can use as delimters. If you need three consecutive backticks
+        #       in your code, use four for delimiters, etc.
+        #
+        #   *   You can use spaces to get literal backticks at the edges:
+        #
+        #         ... type `` `bar` `` ...
+        #
+        #       Turns to:
+        #
+        #         ... type <code>`bar`</code> ...
+        return self._code_span_re.sub(self._code_span_sub, text)
+
+    def _encode_code(self, text):
+        """Encode/escape certain characters inside Markdown code runs.
+        The point is that in code, these characters are literals,
+        and lose their special Markdown meanings.
+        """
+        replacements = [
+            # Encode all ampersands; HTML entities are not
+            # entities within a Markdown code span.
+            ('&', '&'),
+            # Do the angle bracket song and dance:
+            ('<', '<'),
+            ('>', '>'),
+            # Now, escape characters that are magic in Markdown:
+            ('*', g_escape_table['*']),
+            ('_', g_escape_table['_']),
+            ('{', g_escape_table['{']),
+            ('}', g_escape_table['}']),
+            ('[', g_escape_table['[']),
+            (']', g_escape_table[']']),
+            ('\\', g_escape_table['\\']),
+        ]
+        for before, after in replacements:
+            text = text.replace(before, after)
+        return text
+
+    _strong_re = re.compile(r"(?<!\w)(\*\*|__)(?=\S)(.+?[*_]*)(?<=\S)\1(?!\w)", re.S)
+    _em_re = re.compile(r"(?<!\w)(\*|_)(?=\S)(.+?)(?<=\S)\1(?!\w)", re.S)
+    _code_friendly_strong_re = re.compile(r"\*\*(?=\S)(.+?[*_]*)(?<=\S)\*\*", re.S)
+    _code_friendly_em_re = re.compile(r"\*(?=\S)(.+?)(?<=\S)\*", re.S)
+    def _do_italics_and_bold(self, text):
+        # <strong> must go first:
+        if "code-friendly" in self.extras:
+            text = self._code_friendly_strong_re.sub(r"<strong>\1</strong>", text)
+            text = self._code_friendly_em_re.sub(r"<em>\1</em>", text)
+        else:
+            text = self._strong_re.sub(r"<strong>\2</strong>", text)
+            text = self._em_re.sub(r"<em>\2</em>", text)
+        return text
+
+
+    _block_quote_re = re.compile(r'''
+        (                           # Wrap whole match in \1
+          (
+            ^[ \t]*>[ \t]?          # '>' at the start of a line
+              .+\n                  # rest of the first line
+            (.+\n)*                 # subsequent consecutive lines
+            \n*                     # blanks
+          )+
+        )
+        ''', re.M | re.X)
+    _bq_one_level_re = re.compile('^[ \t]*>[ \t]?', re.M);
+
+    _html_pre_block_re = re.compile(r'(\s*<pre>.+?</pre>)', re.S)
+    def _dedent_two_spaces_sub(self, match):
+        return re.sub(r'(?m)^  ', '', match.group(1))
+
+    def _block_quote_sub(self, match):
+        bq = match.group(1)
+        bq = self._bq_one_level_re.sub('', bq)  # trim one level of quoting
+        bq = self._ws_only_line_re.sub('', bq)  # trim whitespace-only lines
+        bq = self._run_block_gamut(bq)          # recurse
+
+        bq = re.sub('(?m)^', '  ', bq)
+        # These leading spaces screw with <pre> content, so we need to fix that:
+        bq = self._html_pre_block_re.sub(self._dedent_two_spaces_sub, bq)
+
+        return "<blockquote>\n%s\n</blockquote>\n\n" % bq
+
+    def _do_block_quotes(self, text):
+        if '>' not in text:
+            return text
+        return self._block_quote_re.sub(self._block_quote_sub, text)
+
+    def _form_paragraphs(self, text):
+        # Strip leading and trailing lines:
+        text = text.strip('\n')
+
+        # Wrap <p> tags.
+        grafs = re.split(r"\n{2,}", text)
+        for i, graf in enumerate(grafs):
+            if graf in self.html_blocks:
+                # Unhashify HTML blocks
+                grafs[i] = self.html_blocks[graf]
+            else:
+                # Wrap <p> tags.
+                graf = self._run_span_gamut(graf)
+                grafs[i] = "<p>" + graf.lstrip(" \t") + "</p>"
+
+        return "\n\n".join(grafs)
+
+    def _add_footnotes(self, text):
+        if self.footnotes:
+            footer = [
+                '<div class="footnotes">',
+                '<hr' + self.empty_element_suffix,
+                '<ol>',
+            ]
+            for i, id in enumerate(self.footnote_ids):
+                if i != 0:
+                    footer.append('')
+                footer.append('<li id="fn-%s">' % id)
+                footer.append(self._run_block_gamut(self.footnotes[id]))
+                backlink = ('<a href="#fnref-%s" '
+                    'class="footnoteBackLink" '
+                    'title="Jump back to footnote %d in the text.">'
+                    '↩</a>' % (id, i+1))
+                if footer[-1].endswith("</p>"):
+                    footer[-1] = footer[-1][:-len("</p>")] \
+                        + ' ' + backlink + "</p>"
+                else:
+                    footer.append("\n<p>%s</p>" % backlink)
+                footer.append('</li>')
+            footer.append('</ol>')
+            footer.append('</div>')
+            return text + '\n\n' + '\n'.join(footer)
+        else:
+            return text
+
+    # Ampersand-encoding based entirely on Nat Irons's Amputator MT plugin:
+    #   http://bumppo.net/projects/amputator/
+    _ampersand_re = re.compile(r'&(?!#?[xX]?(?:[0-9a-fA-F]+|\w+);)')
+    _naked_lt_re = re.compile(r'<(?![a-z/?\$!])', re.I)
+    _naked_gt_re = re.compile(r'''(?<![a-z?!/'"-])>''', re.I)
+
+    def _encode_amps_and_angles(self, text):
+        # Smart processing for ampersands and angle brackets that need
+        # to be encoded.
+        text = self._ampersand_re.sub('&', text)
+
+        # Encode naked <'s
+        text = self._naked_lt_re.sub('<', text)
+
+        # Encode naked >'s
+        # Note: Other markdown implementations (e.g. Markdown.pl, PHP
+        # Markdown) don't do this.
+        text = self._naked_gt_re.sub('>', text)
+        return text
+
+    def _encode_backslash_escapes(self, text):
+        for ch, escape in g_escape_table.items():
+            text = text.replace("\\"+ch, escape)
+        return text
+
+    _auto_link_re = re.compile(r'<((https?|ftp):[^\'">\s]+)>', re.I)
+    def _auto_link_sub(self, match):
+        g1 = match.group(1)
+        return '<a href="%s">%s</a>' % (g1, g1)
+
+    _auto_email_link_re = re.compile(r"""
+          <
+           (?:mailto:)?
+          (
+              [-.\w]+
+              \@
+              [-\w]+(\.[-\w]+)*\.[a-z]+
+          )
+          >
+        """, re.I | re.X | re.U)
+    def _auto_email_link_sub(self, match):
+        return self._encode_email_address(
+            self._unescape_special_chars(match.group(1)))
+
+    def _do_auto_links(self, text):
+        text = self._auto_link_re.sub(self._auto_link_sub, text)
+        text = self._auto_email_link_re.sub(self._auto_email_link_sub, text)
+        return text
+
+    def _encode_email_address(self, addr):
+        #  Input: an email address, e.g. "foo@example.com"
+        #
+        #  Output: the email address as a mailto link, with each character
+        #      of the address encoded as either a decimal or hex entity, in
+        #      the hopes of foiling most address harvesting spam bots. E.g.:
+        #
+        #    <a href="mailto:foo@e
+        #       xample.com">foo
+        #       @example.com</a>
+        #
+        #  Based on a filter by Matthew Wickline, posted to the BBEdit-Talk
+        #  mailing list: <http://tinyurl.com/yu7ue>
+        chars = [_xml_encode_email_char_at_random(ch)
+                 for ch in "mailto:" + addr]
+        # Strip the mailto: from the visible part.
+        addr = '<a href="%s">%s</a>' \
+               % (''.join(chars), ''.join(chars[7:]))
+        return addr
+
+    def _do_link_patterns(self, text):
+        """Caveat emptor: there isn't much guarding against link
+        patterns being formed inside other standard Markdown links, e.g.
+        inside a [link def][like this].
+
+        Dev Notes: *Could* consider prefixing regexes with a negative
+        lookbehind assertion to attempt to guard against this.
+        """
+        link_from_hash = {}
+        for regex, repl in self.link_patterns:
+            replacements = []
+            for match in regex.finditer(text):
+                if hasattr(repl, "__call__"):
+                    href = repl(match)
+                else:
+                    href = match.expand(repl)
+                replacements.append((match.span(), href))
+            for (start, end), href in reversed(replacements):
+                escaped_href = (
+                    href.replace('"', '"')  # b/c of attr quote
+                        # To avoid markdown <em> and <strong>:
+                        .replace('*', g_escape_table['*'])
+                        .replace('_', g_escape_table['_']))
+                link = '<a href="%s">%s</a>' % (escaped_href, text[start:end])
+                hash = _hash_text(link)
+                link_from_hash[hash] = link
+                text = text[:start] + hash + text[end:]
+        for hash, link in link_from_hash.items():
+            text = text.replace(hash, link)
+        return text
+
+    def _unescape_special_chars(self, text):
+        # Swap back in all the special characters we've hidden.
+        for ch, hash in g_escape_table.items():
+            text = text.replace(hash, ch)
+        return text
+
+    def _outdent(self, text):
+        # Remove one level of line-leading tabs or spaces
+        return self._outdent_re.sub('', text)
+
+
+class MarkdownWithExtras(Markdown):
+    """A markdowner class that enables most extras:
+
+    - footnotes
+    - code-color (only has effect if 'pygments' Python module on path)
+
+    These are not included:
+    - pyshell (specific to Python-related documenting)
+    - code-friendly (because it *disables* part of the syntax)
+    - link-patterns (because you need to specify some actual
+      link-patterns anyway)
+    """
+    extras = ["footnotes", "code-color"]
+
+
+#---- internal support functions
+
+# From http://aspn.activestate.com/ASPN/Cookbook/Python/Recipe/52549
+def _curry(*args, **kwargs):
+    function, args = args[0], args[1:]
+    def result(*rest, **kwrest):
+        combined = kwargs.copy()
+        combined.update(kwrest)
+        return function(*args + rest, **combined)
+    return result
+
+# Recipe: regex_from_encoded_pattern (1.0)
+def _regex_from_encoded_pattern(s):
+    """'foo'    -> re.compile(re.escape('foo'))
+       '/foo/'  -> re.compile('foo')
+       '/foo/i' -> re.compile('foo', re.I)
+    """
+    if s.startswith('/') and s.rfind('/') != 0:
+        # Parse it: /PATTERN/FLAGS
+        idx = s.rfind('/')
+        pattern, flags_str = s[1:idx], s[idx+1:]
+        flag_from_char = {
+            "i": re.IGNORECASE,
+            "l": re.LOCALE,
+            "s": re.DOTALL,
+            "m": re.MULTILINE,
+            "u": re.UNICODE,
+        }
+        flags = 0
+        for char in flags_str:
+            try:
+                flags |= flag_from_char[char]
+            except KeyError:
+                raise ValueError("unsupported regex flag: '%s' in '%s' "
+                                 "(must be one of '%s')"
+                                 % (char, s, ''.join(flag_from_char.keys())))
+        return re.compile(s[1:idx], flags)
+    else: # not an encoded regex
+        return re.compile(re.escape(s))
+
+# Recipe: dedent (0.1.2)
+def _dedentlines(lines, tabsize=8, skip_first_line=False):
+    """_dedentlines(lines, tabsize=8, skip_first_line=False) -> dedented lines
+
+        "lines" is a list of lines to dedent.
+        "tabsize" is the tab width to use for indent width calculations.
+        "skip_first_line" is a boolean indicating if the first line should
+            be skipped for calculating the indent width and for dedenting.
+            This is sometimes useful for docstrings and similar.
+
+    Same as dedent() except operates on a sequence of lines. Note: the
+    lines list is modified **in-place**.
+    """
+    DEBUG = False
+    if DEBUG:
+        print "dedent: dedent(..., tabsize=%d, skip_first_line=%r)"\
+              % (tabsize, skip_first_line)
+    indents = []
+    margin = None
+    for i, line in enumerate(lines):
+        if i == 0 and skip_first_line: continue
+        indent = 0
+        for ch in line:
+            if ch == ' ':
+                indent += 1
+            elif ch == '\t':
+                indent += tabsize - (indent % tabsize)
+            elif ch in '\r\n':
+                continue # skip all-whitespace lines
+            else:
+                break
+        else:
+            continue # skip all-whitespace lines
+        if DEBUG: print "dedent: indent=%d: %r" % (indent, line)
+        if margin is None:
+            margin = indent
+        else:
+            margin = min(margin, indent)
+    if DEBUG: print "dedent: margin=%r" % margin
+
+    if margin is not None and margin > 0:
+        for i, line in enumerate(lines):
+            if i == 0 and skip_first_line: continue
+            removed = 0
+            for j, ch in enumerate(line):
+                if ch == ' ':
+                    removed += 1
+                elif ch == '\t':
+                    removed += tabsize - (removed % tabsize)
+                elif ch in '\r\n':
+                    if DEBUG: print "dedent: %r: EOL -> strip up to EOL" % line
+                    lines[i] = lines[i][j:]
+                    break
+                else:
+                    raise ValueError("unexpected non-whitespace char %r in "
+                                     "line %r while removing %d-space margin"
+                                     % (ch, line, margin))
+                if DEBUG:
+                    print "dedent: %r: %r -> removed %d/%d"\
+                          % (line, ch, removed, margin)
+                if removed == margin:
+                    lines[i] = lines[i][j+1:]
+                    break
+                elif removed > margin:
+                    lines[i] = ' '*(removed-margin) + lines[i][j+1:]
+                    break
+            else:
+                if removed:
+                    lines[i] = lines[i][removed:]
+    return lines
+
+def _dedent(text, tabsize=8, skip_first_line=False):
+    """_dedent(text, tabsize=8, skip_first_line=False) -> dedented text
+
+        "text" is the text to dedent.
+        "tabsize" is the tab width to use for indent width calculations.
+        "skip_first_line" is a boolean indicating if the first line should
+            be skipped for calculating the indent width and for dedenting.
+            This is sometimes useful for docstrings and similar.
+
+    textwrap.dedent(s), but don't expand tabs to spaces
+    """
+    lines = text.splitlines(1)
+    _dedentlines(lines, tabsize=tabsize, skip_first_line=skip_first_line)
+    return ''.join(lines)
+
+
+class _memoized(object):
+   """Decorator that caches a function's return value each time it is called.
+   If called later with the same arguments, the cached value is returned, and
+   not re-evaluated.
+
+   http://wiki.python.org/moin/PythonDecoratorLibrary
+   """
+   def __init__(self, func):
+      self.func = func
+      self.cache = {}
+   def __call__(self, *args):
+      try:
+         return self.cache[args]
+      except KeyError:
+         self.cache[args] = value = self.func(*args)
+         return value
+      except TypeError:
+         # uncachable -- for instance, passing a list as an argument.
+         # Better to not cache than to blow up entirely.
+         return self.func(*args)
+   def __repr__(self):
+      """Return the function's docstring."""
+      return self.func.__doc__
+
+
+def _xml_oneliner_re_from_tab_width(tab_width):
+    """Standalone XML processing instruction regex."""
+    return re.compile(r"""
+        (?:
+            (?<=\n\n)       # Starting after a blank line
+            |               # or
+            \A\n?           # the beginning of the doc
+        )
+        (                           # save in $1
+            [ ]{0,%d}
+            (?:
+                <\?\w+\b\s+.*?\?>   # XML processing instruction
+                |
+                <\w+:\w+\b\s+.*?/>  # namespaced single tag
+            )
+            [ \t]*
+            (?=\n{2,}|\Z)       # followed by a blank line or end of document
+        )
+        """ % (tab_width - 1), re.X)
+_xml_oneliner_re_from_tab_width = _memoized(_xml_oneliner_re_from_tab_width)
+
+def _hr_tag_re_from_tab_width(tab_width):
+     return re.compile(r"""
+        (?:
+            (?<=\n\n)       # Starting after a blank line
+            |               # or
+            \A\n?           # the beginning of the doc
+        )
+        (                       # save in \1
+            [ ]{0,%d}
+            <(hr)               # start tag = \2
+            \b                  # word break
+            ([^<>])*?           #
+            /?>                 # the matching end tag
+            [ \t]*
+            (?=\n{2,}|\Z)       # followed by a blank line or end of document
+        )
+        """ % (tab_width - 1), re.X)
+_hr_tag_re_from_tab_width = _memoized(_hr_tag_re_from_tab_width)
+
+
+def _xml_encode_email_char_at_random(ch):
+    r = random()
+    # Roughly 10% raw, 45% hex, 45% dec.
+    # '@' *must* be encoded. I [John Gruber] insist.
+    # Issue 26: '_' must be encoded.
+    if r > 0.9 and ch not in "@_":
+        return ch
+    elif r < 0.45:
+        # The [1:] is to drop leading '0': 0x63 -> x63
+        return '&#%s;' % hex(ord(ch))[1:]
+    else:
+        return '&#%s;' % ord(ch)
+
+
+
+#---- mainline
+
+class _NoReflowFormatter(optparse.IndentedHelpFormatter):
+    """An optparse formatter that does NOT reflow the description."""
+    def format_description(self, description):
+        return description or ""
+
+def _test():
+    import doctest
+    doctest.testmod()
+
+def main(argv=None):
+    if argv is None:
+        argv = sys.argv
+    if not logging.root.handlers:
+        logging.basicConfig()
+
+    usage = "usage: %prog [PATHS...]"
+    version = "%prog "+__version__
+    parser = optparse.OptionParser(prog="markdown2", usage=usage,
+        version=version, description=cmdln_desc,
+        formatter=_NoReflowFormatter())
+    parser.add_option("-v", "--verbose", dest="log_level",
+                      action="store_const", const=logging.DEBUG,
+                      help="more verbose output")
+    parser.add_option("--encoding",
+                      help="specify encoding of text content")
+    parser.add_option("--html4tags", action="store_true", default=False,
+                      help="use HTML 4 style for empty element tags")
+    parser.add_option("-s", "--safe", metavar="MODE", dest="safe_mode",
+                      help="sanitize literal HTML: 'escape' escapes "
+                           "HTML meta chars, 'replace' replaces with an "
+                           "[HTML_REMOVED] note")
+    parser.add_option("-x", "--extras", action="append",
+                      help="Turn on specific extra features (not part of "
+                           "the core Markdown spec). Supported values: "
+                           "'code-friendly' disables _/__ for emphasis; "
+                           "'code-color' adds code-block syntax coloring; "
+                           "'link-patterns' adds auto-linking based on patterns; "
+                           "'footnotes' adds the footnotes syntax;"
+                           "'xml' passes one-liner processing instructions and namespaced XML tags;"
+                           "'pyshell' to put unindented Python interactive shell sessions in a <code> block.")
+    parser.add_option("--use-file-vars",
+                      help="Look for and use Emacs-style 'markdown-extras' "
+                           "file var to turn on extras. See "
+                           "<http://code.google.com/p/python-markdown2/wiki/Extras>.")
+    parser.add_option("--link-patterns-file",
+                      help="path to a link pattern file")
+    parser.add_option("--self-test", action="store_true",
+                      help="run internal self-tests (some doctests)")
+    parser.add_option("--compare", action="store_true",
+                      help="run against Markdown.pl as well (for testing)")
+    parser.set_defaults(log_level=logging.INFO, compare=False,
+                        encoding="utf-8", safe_mode=None, use_file_vars=False)
+    opts, paths = parser.parse_args()
+    log.setLevel(opts.log_level)
+
+    if opts.self_test:
+        return _test()
+
+    if opts.extras:
+        extras = {}
+        for s in opts.extras:
+            splitter = re.compile("[,;: ]+")
+            for e in splitter.split(s):
+                if '=' in e:
+                    ename, earg = e.split('=', 1)
+                    try:
+                        earg = int(earg)
+                    except ValueError:
+                        pass
+                else:
+                    ename, earg = e, None
+                extras[ename] = earg
+    else:
+        extras = None
+
+    if opts.link_patterns_file:
+        link_patterns = []
+        f = open(opts.link_patterns_file)
+        try:
+            for i, line in enumerate(f.readlines()):
+                if not line.strip(): continue
+                if line.lstrip().startswith("#"): continue
+                try:
+                    pat, href = line.rstrip().rsplit(None, 1)
+                except ValueError:
+                    raise MarkdownError("%s:%d: invalid link pattern line: %r"
+                                        % (opts.link_patterns_file, i+1, line))
+                link_patterns.append(
+                    (_regex_from_encoded_pattern(pat), href))
+        finally:
+            f.close()
+    else:
+        link_patterns = None
+
+    from os.path import join, dirname, abspath, exists
+    markdown_pl = join(dirname(dirname(abspath(__file__))), "test",
+                       "Markdown.pl")
+    for path in paths:
+        if opts.compare:
+            print "==== Markdown.pl ===="
+            perl_cmd = 'perl %s "%s"' % (markdown_pl, path)
+            o = os.popen(perl_cmd)
+            perl_html = o.read()
+            o.close()
+            sys.stdout.write(perl_html)
+            print "==== markdown2.py ===="
+        html = markdown_path(path, encoding=opts.encoding,
+                             html4tags=opts.html4tags,
+                             safe_mode=opts.safe_mode,
+                             extras=extras, link_patterns=link_patterns,
+                             use_file_vars=opts.use_file_vars)
+        sys.stdout.write(
+            html.encode(sys.stdout.encoding or "utf-8", 'xmlcharrefreplace'))
+        if opts.compare:
+            test_dir = join(dirname(dirname(abspath(__file__))), "test")
+            if exists(join(test_dir, "test_markdown2.py")):
+                sys.path.insert(0, test_dir)
+                from test_markdown2 import norm_html_from_html
+                norm_html = norm_html_from_html(html)
+                norm_perl_html = norm_html_from_html(perl_html)
+            else:
+                norm_html = html
+                norm_perl_html = perl_html
+            print "==== match? %r ====" % (norm_perl_html == norm_html)
+
+
+if __name__ == "__main__":
+    sys.exit( main(sys.argv) )
+

ADDED   gluon/contrib/markmin/__init__.py
Index: gluon/contrib/markmin/__init__.py
==================================================================
--- /dev/null
+++ gluon/contrib/markmin/__init__.py
@@ -0,0 +1,1 @@
+

ADDED   gluon/contrib/markmin/markmin.html
Index: gluon/contrib/markmin/markmin.html
==================================================================
--- /dev/null
+++ gluon/contrib/markmin/markmin.html
@@ -0,0 +1,35 @@
+<html><body><h1>Markmin markup language</h1><h2>About</h2><p>This is a new markup language that we call markmin designed to produce high quality scientific papers and books and also put them online. We provide serializers for html, latex and pdf. It is implemented in the <code class="">markmin2html</code> function in the <code class="">markmin2html.py</code>.</p><p>Example of usage:</p><pre><code class="">>>> m = "Hello **world** [[link http://web2py.com]]"
+>>> from markmin2html import markmin2html
+>>> print markmin2html(m)
+>>> from markmin2latex import markmin2latex
+>>> print markmin2latex(m)
+>>> from markmin2pdf import markmin2pdf # requires pdflatex
+>>> print markmin2pdf(m)</code></pre><h2>Why?</h2><p>We wanted a markup language with the following requirements:</p><ul><li>less than 100 lines of functional code</li><li>easy to read</li><li>secure</li><li>support table, ul, ol, code</li><li>support html5 video and audio elements (html serialization only)</li><li>can align images and resize them</li><li>can specify class for tables and code elements</li><li>can add anchors</li><li>does not use _ for markup (since it creates odd behavior)</li><li>automatically links urls</li><li>fast</li><li>easy to extend</li><li>supports latex and pdf including references</li><li>allows to describe the markup in the markup (this document is generated from markmin syntax)</li></ul><p>(results depend on text but in average for text ~100K markmin is 30% faster than markdown, for text ~10K it is 10x faster)</p><p>The <a href="http://www.lulu.com/product/paperback/web2py-%283rd-edition%29/12822827">web2py book</a> published by lulu, for example, was entirely generated with markmin2pdf from the online <a href="http://www.web2py.com/book">web2py wiki</a></p><h2>Download</h2><ul><li>http://web2py.googlecode.com/hg/gluon/contrib/markmin/markmin2html.py</li><li>http://web2py.googlecode.com/hg/gluon/contrib/markmin/markmin2latex.py</li><li>http://web2py.googlecode.com/hg/gluon/contrib/markmin/markmin2pdf.py</li></ul><p>markmin2html.py and markmin2latex.py are single files and have no web2py dependence. Their license is BSD.</p><h2>Examples</h2><h3>Bold, italic, code and links</h3><table class=""><tr><td><b>SOURCE</b>                </td><td><b>OUTPUT</b></td></tr><tr><td><code class=""># title</code>               </td><td><b>title</b></td></tr><tr><td><code class="">## section</code>            </td><td><b>section</b></td></tr><tr><td><code class="">### subsection</code>        </td><td><b>subsection</b></td></tr><tr><td><code class="">**bold**</code>              </td><td><b>bold</b></td></tr><tr><td><code class="">''italic''</code>            </td><td><i>italic</i></td></tr><tr><td><code class="">``verbatim``</code>      </td><td><code class="">verbatim</code></td></tr><tr><td><code class="">http://google.com</code>     </td><td>http://google.com</td></tr><tr><td><code class="">[[click me #myanchor]]</code></td><td><a href="#myanchor">click me</a></td></tr></table>
+<h3>More on links</h3><p>The format is always <code class="">[[title link]]</code>. Notice you can nest bold, italic and code inside the link title.</p><h3>Anchors <span id="myanchor"><span></h3><p>You can place an anchor anywhere in the text using the syntax <code class="">[[name]]</code> where <i>name</i> is the name of the anchor.
+You can then link the anchor with <a href="#myanchor">link</a>, i.e. <code class="">[[link #myanchor]]</code>.</p><h3>Images</h3><p><img src="http://www.web2py.com/examples/static/web2py_logo.png" alt="some image" align="right" width="200px" />
+This paragraph has an image aligned to the right with a width of 200px. Its is placed using the code</p><p><code class="">[[some image http://www.web2py.com/examples/static/web2py_logo.png right 200px]]</code>.</p><h3>Unordered Lists</h3><pre><code class="">- Dog
+- Cat
+- Mouse</code></pre><p>is rendered as</p><ul><li>Dog</li><li>Cat</li><li>Mouse</li></ul><p>Two new lines between items break the list in two lists.</p><h3>Ordered Lists</h3><pre><code class="">+ Dog
++ Cat
++ Mouse</code></pre><p>is rendered as</p><ol><li>Dog</li><li>Cat</li><li>Mouse</li></ol><h3>Tables</h3><p>Something like this
+<pre><code class="">---------
+**A** | **B** | **C**
+0 | 0 | X
+0 | X | 0
+X | 0 | 0
+-----:abc</code></pre>
+is a table and is rendered as
+<table class="abc"><tr><td><b>A</b></td><td><b>B</b></td><td><b>C</b></td></tr><tr><td>0</td><td>0</td><td>X</td></tr><tr><td>0</td><td>X</td><td>0</td></tr><tr><td>X</td><td>0</td><td>0</td></tr></table>Four or more dashes delimit the table and | separates the columns.
+The <code class="">:abc</code> at the end sets the class for the table and it is optional.</p><h3>Blockquote</h3><p>A table with a single cell is rendered as a blockquote:</p><blockquote class="">Hello world</blockquote>
+<h3>Code, <code class=""><code></code>, escaping and extra stuff</h3><pre><code class="python">def test():
+    return "this is Python code"</code></pre><p>Optionally a ` inside a <code class="">``...``</code> block can be inserted escaped with !`!.
+The <code class="">:python</code> after the markup is also optional. If present, by default, it is used to set the class of the <code> block.
+The behavior can be overridden by passing an argument <code class="">extra</code> to the <code class="">render</code> function. For example:</p><pre><code class="python">>>> markmin2html("``aaa``:custom",
+       extra=dict(custom=lambda text: 'x'+text+'x'))</code></pre><p>generates</p><code class="python">'xaaax'</code><p>(the <code class="">``...``:custom</code> block is rendered by the <code class="">custom=lambda</code> function passed to <code class="">render</code>).</p><h3>Html5 support</h3><p>Markmin also supports the <video> and <audio> html5 tags using the notation:
+<pre><code class="">[[title link video]]
+[[title link audio]]</code></pre></p><h3>Latex</h3><p>Formulas can be embedded into HTML with <code class="">$</code><code class="">$</code>formula<code class="">$</code><code class="">$</code>.
+You can use Google charts to render the formula:</p><pre><code class="">>>> LATEX = '<img src="http://chart.apis.google.com/chart?cht=tx&chl=%s" align="center"/>'
+>>> markmin2html(text,{'latex':lambda code: LATEX % code.replace('"','"')})</code></pre><h3>Citations and References</h3><p>Citations are treated as internal links in html and proper citations in latex if there is a final section called "References". Items like</p><pre><code class="">- [[key]] value</code></pre><p>in the References will be translated into Latex</p><pre><code class="">\bibitem{key} value</code></pre><p>Here is an example of usage:</p><pre><code class="">As shown in Ref.``mdipierro``:cite
+
+## References
+- [[mdipierro]] web2py Manual, 3rd Edition, lulu.com</code></pre><h3>Caveats</h3><p><code class=""><ul/></code>, <code class=""><ol/></code>, <code class=""><code/></code>, <code class=""><table/></code>, <code class=""><blockquote/></code>, <code class=""><h1/></code>, ..., <code class=""><h6/></code> do not have <code class=""><p>...</p></code> around them.</p></body></html>

ADDED   gluon/contrib/markmin/markmin.pdf
Index: gluon/contrib/markmin/markmin.pdf
==================================================================
--- /dev/null
+++ gluon/contrib/markmin/markmin.pdf
cannot compute difference between binary files

ADDED   gluon/contrib/markmin/markmin2html.py
Index: gluon/contrib/markmin/markmin2html.py
==================================================================
--- /dev/null
+++ gluon/contrib/markmin/markmin2html.py
@@ -0,0 +1,455 @@
+#!/usr/bin/env python                                                                                                        # created my Massimo Di Pierro
+# license MIT/BSD/GPL
+import re
+import cgi
+
+__all__ = ['render', 'markmin2html']
+
+__doc__ = """
+# Markmin markup language
+
+## About
+
+This is a new markup language that we call markmin designed to produce high quality scientific papers and books and also put them online. We provide serializers for html, latex and pdf. It is implemented in the ``markmin2html`` function in the ``markmin2html.py``.
+
+Example of usage:
+
+``
+>>> m = "Hello **world** [[link http://web2py.com]]"
+>>> from markmin2html import markmin2html
+>>> print markmin2html(m)
+>>> from markmin2latex import markmin2latex
+>>> print markmin2latex(m)
+>>> from markmin2pdf import markmin2pdf # requires pdflatex
+>>> print markmin2pdf(m)
+``
+
+## Why?
+
+We wanted a markup language with the following requirements:
+- less than 100 lines of functional code
+- easy to read
+- secure
+- support table, ul, ol, code
+- support html5 video and audio elements (html serialization only)
+- can align images and resize them
+- can specify class for tables and code elements
+- can add anchors
+- does not use _ for markup (since it creates odd behavior)
+- automatically links urls
+- fast
+- easy to extend
+- supports latex and pdf including references
+- allows to describe the markup in the markup (this document is generated from markmin syntax)
+
+(results depend on text but in average for text ~100K markmin is 30% faster than markdown, for text ~10K it is 10x faster)
+
+The [[web2py book http://www.lulu.com/product/paperback/web2py-%283rd-edition%29/12822827]] published by lulu, for example, was entirely generated with markmin2pdf from the online [[web2py wiki http://www.web2py.com/book]]
+
+## Download
+
+- http://web2py.googlecode.com/hg/gluon/contrib/markmin/markmin2html.py
+- http://web2py.googlecode.com/hg/gluon/contrib/markmin/markmin2latex.py
+- http://web2py.googlecode.com/hg/gluon/contrib/markmin/markmin2pdf.py
+
+markmin2html.py and markmin2latex.py are single files and have no web2py dependence. Their license is BSD.
+
+## Examples
+
+### Bold, italic, code and links
+
+--------------------------------------------------
+**SOURCE**                 | **OUTPUT**
+``# title``                | **title**
+``## section``             | **section**
+``### subsection``         | **subsection**
+``**bold**``               | **bold**
+``''italic''``             | ''italic''
+``!`!`verbatim`!`!``       | ``verbatim``
+``http://google.com``      | http://google.com
+``[[click me #myanchor]]`` | [[click me #myanchor]]
+---------------------------------------------------
+
+### More on links
+
+The format is always ``[[title link]]``. Notice you can nest bold, italic and code inside the link title.
+
+### Anchors [[myanchor]]
+
+You can place an anchor anywhere in the text using the syntax ``[[name]]`` where ''name'' is the name of the anchor.
+You can then link the anchor with [[link #myanchor]], i.e. ``[[link #myanchor]]``.
+
+### Images
+
+[[some image http://www.web2py.com/examples/static/web2py_logo.png right 200px]]
+This paragraph has an image aligned to the right with a width of 200px. Its is placed using the code
+
+``[[some image http://www.web2py.com/examples/static/web2py_logo.png right 200px]]``.
+
+### Unordered Lists
+
+``
+- Dog
+- Cat
+- Mouse
+``
+
+is rendered as
+- Dog
+- Cat
+- Mouse
+
+Two new lines between items break the list in two lists.
+
+### Ordered Lists
+
+``
++ Dog
++ Cat
++ Mouse
+``
+
+is rendered as
++ Dog
++ Cat
++ Mouse
+
+
+### Tables
+
+Something like this
+``
+---------
+**A** | **B** | **C**
+0 | 0 | X
+0 | X | 0
+X | 0 | 0
+-----:abc
+``
+is a table and is rendered as
+---------
+**A** | **B** | **C**
+0 | 0 | X
+0 | X | 0
+X | 0 | 0
+-----:abc
+Four or more dashes delimit the table and | separates the columns.
+The ``:abc`` at the end sets the class for the table and it is optional.
+
+### Blockquote
+
+A table with a single cell is rendered as a blockquote:
+
+-----
+Hello world
+-----
+
+### Code, ``<code>``, escaping and extra stuff
+
+``
+def test():
+    return "this is Python code"
+``:python
+
+Optionally a ` inside a ``!`!`...`!`!`` block can be inserted escaped with !`!.
+The ``:python`` after the markup is also optional. If present, by default, it is used to set the class of the <code> block.
+The behavior can be overridden by passing an argument ``extra`` to the ``render`` function. For example:
+
+``
+>>> markmin2html("!`!!`!aaa!`!!`!:custom",
+       extra=dict(custom=lambda text: 'x'+text+'x'))
+``:python
+
+generates
+
+``'xaaax'``:python
+
+(the ``!`!`...`!`!:custom`` block is rendered by the ``custom=lambda`` function passed to ``render``).
+
+
+### Html5 support
+
+Markmin also supports the <video> and <audio> html5 tags using the notation:
+``
+[[title link video]]
+[[title link audio]]
+``
+
+### Latex and other extensions
+
+Formulas can be embedded into HTML with ``$````$``formula``$````$``.
+You can use Google charts to render the formula:
+
+``
+>>> LATEX = '<img src="http://chart.apis.google.com/chart?cht=tx&chl=%s" align="ce\
+nter"/>'
+>>> markmin2html(text,{'latex':lambda code: LATEX % code.replace('"','\"')})
+``
+
+### Code with syntax highlighting
+
+This requires a syntax highlighting tool, such as the web2py CODE helper.
+
+``
+>>> extra={'code_cpp':lambda text: CODE(text,language='cpp').xml(),
+           'code_java':lambda text: CODE(text,language='java').xml(),
+           'code_python':lambda text: CODE(text,language='python').xml(),
+           'code_html':lambda text: CODE(text,language='html').xml()}
+>>> markmin2html(text,extra=extra)
+``
+
+Code can now be marked up as in this example:
+
+``
+!`!`
+<html><body>example</body></html>
+!`!`:code_html
+``
+
+### Citations and References
+
+Citations are treated as internal links in html and proper citations in latex if there is a final section called "References". Items like
+
+``
+- [[key]] value
+``
+
+in the References will be translated into Latex
+
+``
+\\bibitem{key} value
+``
+
+Here is an example of usage:
+
+``
+As shown in Ref.!`!`mdipierro`!`!:cite
+
+## References
+- [[mdipierro]] web2py Manual, 3rd Edition, lulu.com
+``
+
+### Caveats
+``<ul/>``, ``<ol/>``, ``<code/>``, ``<table/>``, ``<blockquote/>``, ``<h1/>``, ..., ``<h6/>`` do not have ``<p>...</p>`` around them.
+
+"""
+
+META = 'META'
+LATEX = '<img src="http://chart.apis.google.com/chart?cht=tx&chl=%s" align="center"/>'
+regex_newlines = re.compile('(\n\r)|(\r\n)')
+regex_dd=re.compile('\$\$(?P<latex>.*?)\$\$')
+regex_code = re.compile('('+META+')|(``(?P<t>.*?)``(:(?P<c>\w+))?)',re.S)
+regex_maps = [
+    (re.compile('[ \t\r]+\n'),'\n'),
+    (re.compile('[ \t\r]+\n'),'\n'),
+    (re.compile('\*\*(?P<t>[^\s\*]+( +[^\s\*]+)*)\*\*'),'<b>\g<t></b>'),
+    (re.compile("''(?P<t>[^\s']+( +[^\s']+)*)''"),'<i>\g<t></i>'),
+    (re.compile('^#{6} (?P<t>[^\n]+)',re.M),'\n\n<<h6>\g<t></h6>\n'),
+    (re.compile('^#{5} (?P<t>[^\n]+)',re.M),'\n\n<<h5>\g<t></h5>\n'),
+    (re.compile('^#{4} (?P<t>[^\n]+)',re.M),'\n\n<<h4>\g<t></h4>\n'),
+    (re.compile('^#{3} (?P<t>[^\n]+)',re.M),'\n\n<<h3>\g<t></h3>\n'),
+    (re.compile('^#{2} (?P<t>[^\n]+)',re.M),'\n\n<<h2>\g<t></h2>\n'),
+    (re.compile('^#{1} (?P<t>[^\n]+)',re.M),'\n\n<<h1>\g<t></h1>\n'),
+    (re.compile('^\- +(?P<t>.*)',re.M),'<<ul><li>\g<t></li></ul>'),
+    (re.compile('^\+ +(?P<t>.*)',re.M),'<<ol><li>\g<t></li></ol>'),
+    (re.compile('</ol>\n<<ol>'),''),
+    (re.compile('</ul>\n<<ul>'),''),
+    (re.compile('<<'),'\n\n<<'),
+    (re.compile('\n\s+\n'),'\n\n')]
+regex_table = re.compile('^\-{4,}\n(?P<t>.*?)\n\-{4,}(:(?P<c>\w+))?\n',re.M|re.S)
+regex_anchor = re.compile('\[\[(?P<t>\S+)\]\]')
+regex_image_width = re.compile('\[\[(?P<t>.*?) +(?P<k>\S+) +(?P<p>left|right|center) +(?P<w>\d+px)\]\]')
+regex_image = re.compile('\[\[(?P<t>.*?) +(?P<k>\S+) +(?P<p>left|right|center)\]\]')
+regex_video = re.compile('\[\[(?P<t>.*?) +(?P<k>\S+) +video\]\]')
+regex_audio = re.compile('\[\[(?P<t>.*?) +(?P<k>\S+) +audio\]\]')
+regex_link = re.compile('\[\[(?P<t>.*?) +(?P<k>\S+)\]\]')
+regex_link_popup = re.compile('\[\[(?P<t>.*?) +(?P<k>\S+) popup\]\]')
+regex_link_no_anchor = re.compile('\[\[ +(?P<k>\S+)\]\]')
+regex_auto = re.compile('(?<!["\w\>])(?P<k>\w+://[\w\.\-\+\?&%\/]+)',re.M)
+
+def render(text,extra={},allowed={},sep='p'):
+    """
+    Arguments:
+    - text is the text to be processed
+    - extra is a dict like extra=dict(custom=lambda value: value) that process custom code
+      as in " ``this is custom code``:custom "
+    - allowed is a dictionary of list of allowed classes like
+      allowed = dict(code=('python','cpp','java'))
+    - sep can be 'p' to separate text in <p>...</p>
+      or can be 'br' to separate text using <br />
+
+
+    >>> render('this is\\n# a section\\nparagraph')
+    '<p>this is</p><h1>a section</h1><p>paragraph</p>'
+    >>> render('this is\\n## a subsection\\nparagraph')
+    '<p>this is</p><h2>a subsection</h2><p>paragraph</p>'
+    >>> render('this is\\n### a subsubsection\\nparagraph')
+    '<p>this is</p><h3>a subsubsection</h3><p>paragraph</p>'
+    >>> render('**hello world**')
+    '<p><b>hello world</b></p>'
+    >>> render('``hello world``')
+    '<code class="">hello world</code>'
+    >>> render('``hello world``:python')
+    '<code class="python">hello world</code>'
+    >>> render('``\\nhello\\nworld\\n``:python')
+    '<pre><code class="python">hello\\nworld</code></pre>'
+    >>> render("''hello world''")
+    '<p><i>hello world</i></p>'
+    >>> render('** hello** **world**')
+    '<p>** hello** <b>world</b></p>'
+
+    >>> render('- this\\n- is\\n- a list\\n\\nand this\\n- is\\n- another')
+    '<ul><li>this</li><li>is</li><li>a list</li></ul><p>and this</p><ul><li>is</li><li>another</li></ul>'
+
+    >>> render('+ this\\n+ is\\n+ a list\\n\\nand this\\n+ is\\n+ another')
+    '<ol><li>this</li><li>is</li><li>a list</li></ol><p>and this</p><ol><li>is</li><li>another</li></ol>'
+
+    >>> render("----\\na | b\\nc | d\\n----\\n")
+    '<table class=""><tr><td>a</td><td>b</td></tr><tr><td>c</td><td>d</td></tr></table>'
+
+    >>> render("----\\nhello world\\n----\\n")
+    '<blockquote class="">hello world</blockquote>'
+
+    >>> render('[[this is a link http://example.com]]')
+    '<p><a href="http://example.com">this is a link</a></p>'
+
+    >>> render('[[this is an image http://example.com left]]')
+    '<p><img src="http://example.com" alt="this is an image" align="left" /></p>'
+    >>> render('[[this is an image http://example.com left 200px]]')
+    '<p><img src="http://example.com" alt="this is an image" align="left" width="200px" /></p>'
+
+    >>> render('[[this is an image http://example.com video]]')
+    '<p><video src="http://example.com" controls></video></p>'
+    >>> render('[[this is an image http://example.com audio]]')
+    '<p><audio src="http://example.com" controls></audio></p>'
+
+    >>> render('[[this is a **link** http://example.com]]')
+    '<p><a href="http://example.com">this is a <b>link</b></a></p>'
+
+    >>> render("``aaa``:custom",extra=dict(custom=lambda text: 'x'+text+'x'))
+    'xaaax'
+    >>> render(r"$$\int_a^b sin(x)dx$$")
+    '<code class="latex">\\\\int_a^b sin(x)dx</code>'
+    """
+    text = str(text or '')
+    #############################################################
+    # replace all blocks marked with ``...``:class with META
+    # store them into segments they will be treated as code
+    #############################################################
+    segments, i = [], 0
+    text = regex_dd.sub('``\g<latex>``:latex ',text)
+    text = regex_newlines.sub('\n',text)
+    while True:
+        item = regex_code.search(text,i)
+        if not item: break
+        if item.group()==META:
+            segments.append((None,None))
+            text = text[:item.start()]+META+text[item.end():]
+        else:
+            c = item.group('c') or ''
+            if 'code' in allowed and not c in allowed['code']: c = ''
+            code = item.group('t').replace('!`!','`')
+            segments.append((code,c))
+            text = text[:item.start()]+META+text[item.end():]
+        i=item.start()+3
+
+    #############################################################
+    # do h1,h2,h3,h4,h5,h6,b,i,ol,ul and normalize spaces
+    #############################################################
+    text = '\n'.join(t.strip() for t in text.split('\n'))
+    text = cgi.escape(text)
+    for regex, sub in regex_maps:
+        text = regex.sub(sub,text)
+
+    #############################################################
+    # process tables and blockquotes
+    #############################################################
+    while True:
+        item = regex_table.search(text)
+        if not item: break
+        c = item.group('c') or ''
+        if 'table' in allowed and not c in allowed['table']: c = ''
+        content = item.group('t')
+        if ' | ' in content:
+            rows = content.replace('\n','</td></tr><tr><td>').replace(' | ','</td><td>')
+            text = text[:item.start()] + '<<table class="%s"><tr><td>'%c + rows + '</td></tr></table>' + text[item.end():]
+        else:
+            text = text[:item.start()] + '<<blockquote class="%s">'%c + content + '</blockquote>' + text[item.end():]
+
+    #############################################################
+    # deal with images, videos, audios and links
+    #############################################################
+
+    text = regex_anchor.sub('<span id="\g<t>"><span>', text)
+    text = regex_image_width.sub('<img src="\g<k>" alt="\g<t>" align="\g<p>" width="\g<w>" />', text)
+    text = regex_image.sub('<img src="\g<k>" alt="\g<t>" align="\g<p>" />', text)
+    text = regex_video.sub('<video src="\g<k>" controls></video>', text)
+    text = regex_audio.sub('<audio src="\g<k>" controls></audio>', text)
+    text = regex_link_popup.sub('<a href="\g<k>" target="_blank">\g<t></a>', text)
+    text = regex_link_no_anchor.sub('<a href="\g<k>">\g<k></a>', text)
+    text = regex_link.sub('<a href="\g<k>">\g<t></a>', text)
+    text = regex_auto.sub('<a href="\g<k>">\g<k></a>', text)
+
+    #############################################################
+    # deal with paragraphs (trick <<ul, <<ol, <<table, <<h1, etc)
+    # the << indicates that there should NOT be a new paragraph
+    # META indicates a code block therefore no new paragraph
+    #############################################################
+    items = [item.strip() for item in text.split('\n\n')]
+    if sep=='p':
+        text = ''.join(p[:2]!='<<' and p!=META and '<p>%s</p>'%p or '%s'%p for p in items if p)
+    elif sep=='br':
+        text = '<br />'.join(items)
+
+    #############################################################
+    # finally get rid of <<
+    #############################################################
+    text=text.replace('<<','<')
+
+    #############################################################
+    # process all code text
+    #############################################################
+    parts = text.split(META)
+    text = parts[0]
+    for i,(code,b) in enumerate(segments):
+        if code==None:
+            html = META
+        else:
+            if b in extra:
+                if code[:1]=='\n': code=code[1:]
+                if code[-1:]=='\n': code=code[:-1]
+                html = extra[b](code)
+            elif b=='cite':
+                html = '['+','.join('<a href="#%s" class="%s">%s</a>' \
+                      % (d,b,d) \
+                      for d in cgi.escape(code).split(','))+']'
+            elif b=='latex':
+                html = LATEX % code.replace('"','\"').replace('\n',' ')
+            elif code[:1]=='\n' or code[-1:]=='\n':
+                if code[:1]=='\n': code=code[1:]
+                if code[-1:]=='\n': code=code[:-1]
+                html = '<pre><code class="%s">%s</code></pre>' % (b,cgi.escape(code))
+            else:
+                if code[:1]=='\n': code=code[1:]
+                if code[-1:]=='\n': code=code[:-1]
+                html = '<code class="%s">%s</code>' % (b,cgi.escape(code))
+        text = text+html+parts[i+1]
+    return text
+
+
+def markmin2html(text,extra={},allowed={},sep='p'):
+    return render(text,extra,allowed,sep)
+
+if __name__ == '__main__':
+    import sys
+    import doctest
+    if sys.argv[1:2]==['-h']:
+        print '<html><body>'+markmin2html(__doc__)+'</body></html>'
+    elif len(sys.argv)>1:
+        fargv = open(sys.argv[1],'r')
+        try:
+            print '<html><body>'+markmin2html(fargv.read())+'</body></html>'
+        finally:
+            fargv.close()
+    else:
+        doctest.testmod()

ADDED   gluon/contrib/markmin/markmin2latex.py
Index: gluon/contrib/markmin/markmin2latex.py
==================================================================
--- /dev/null
+++ gluon/contrib/markmin/markmin2latex.py
@@ -0,0 +1,284 @@
+#!/usr/bin/env python
+# created my Massimo Di Pierro
+# license MIT/BSD/GPL
+import re
+import cgi
+import sys
+import doctest
+from optparse import OptionParser
+
+__all__ = ['render','markmin2latex']
+
+META = 'META'
+regex_newlines = re.compile('(\n\r)|(\r\n)')
+regex_dd=re.compile('\$\$(?P<latex>.*?)\$\$')
+regex_code = re.compile('('+META+')|(``(?P<t>.*?)``(:(?P<c>\w+))?)',re.S)
+regex_title = re.compile('^#{1} (?P<t>[^\n]+)',re.M)
+regex_maps = [
+    (re.compile('[ \t\r]+\n'),'\n'),
+    (re.compile('[ \t\r]+\n'),'\n'),
+    (re.compile('\*\*(?P<t>[^\s\*]+( +[^\s\*]+)*)\*\*'),'{\\\\bf \g<t>}'),
+    (re.compile("''(?P<t>[^\s']+( +[^\s']+)*)''"),'{\\it \g<t>}'),
+    (re.compile('^#{6} (?P<t>[^\n]+)',re.M),'\n\n{\\\\bf \g<t>}\n'),
+    (re.compile('^#{5} (?P<t>[^\n]+)',re.M),'\n\n{\\\\bf \g<t>}\n'),
+    (re.compile('^#{4} (?P<t>[^\n]+)',re.M),'\n\n\\\\goodbreak\\subsubsection{\g<t>}\n'),
+    (re.compile('^#{3} (?P<t>[^\n]+)',re.M),'\n\n\\\\goodbreak\\subsection{\g<t>}\n'),
+    (re.compile('^#{2} (?P<t>[^\n]+)',re.M),'\n\n\\\\goodbreak\\section{\g<t>}\n'),
+    (re.compile('^#{1} (?P<t>[^\n]+)',re.M),''),
+    (re.compile('^\- +(?P<t>.*)',re.M),'\\\\begin{itemize}\n\\item \g<t>\n\\end{itemize}'),
+    (re.compile('^\+ +(?P<t>.*)',re.M),'\\\\begin{itemize}\n\\item \g<t>\n\\end{itemize}'),
+    (re.compile('\\\\end\{itemize\}\s+\\\\begin\{itemize\}'),'\n'),
+    (re.compile('\n\s+\n'),'\n\n')]
+regex_table = re.compile('^\-{4,}\n(?P<t>.*?)\n\-{4,}(:(?P<c>\w+))?\n',re.M|re.S)
+
+regex_anchor = re.compile('\[\[(?P<t>\S+)\]\]')
+regex_bibitem = re.compile('\-\s*\[\[(?P<t>\S+)\]\]')
+regex_image_width = re.compile('\[\[(?P<t>.*?) +(?P<k>\S+) +(?P<p>left|right|center) +(?P<w>\d+px)\]\]')
+regex_image = re.compile('\[\[(?P<t>.*?) +(?P<k>\S+) +(?P<p>left|right|center)\]\]')
+#regex_video = re.compile('\[\[(?P<t>.*?) +(?P<k>\S+) +video\]\]')
+#regex_audio = re.compile('\[\[(?P<t>.*?) +(?P<k>\S+) +audio\]\]')
+regex_link = re.compile('\[\[(?P<t>.*?) +(?P<k>\S+)\]\]')
+regex_auto = re.compile('(?<!["\w])(?P<k>\w+://[\w\.\-\?&%]+)',re.M)
+regex_commas = re.compile('[ ]+(?P<t>[,;\.])')
+regex_noindent = re.compile('\n\n(?P<t>[a-z])')
+regex_quote_left = re.compile('"(?=\w)')
+regex_quote_right = re.compile('(?=\w\.)"')
+
+def latex_escape(text,pound=True):
+    text=text.replace('\\','{\\textbackslash}')
+    for c in '^_&$%{}': text=text.replace(c,'\\'+c)
+    text=text.replace('\\{\\textbackslash\\}','{\\textbackslash}')
+    if pound: text=text.replace('#','\\#')
+    return text
+
+def render(text,extra={},allowed={},sep='p',image_mapper=lambda x:x):
+    #############################################################
+    # replace all blocks marked with ``...``:class with META
+    # store them into segments they will be treated as code
+    #############################################################
+    text = str(text or '')
+    segments, i = [], 0
+    text = regex_dd.sub('``\g<latex>``:latex ',text)
+    text = regex_newlines.sub('\n',text)
+    while True:
+        item = regex_code.search(text,i)
+        if not item: break
+        if item.group()==META:
+            segments.append((None,None))
+            text = text[:item.start()]+META+text[item.end():]
+        else:
+            c = item.group('c') or ''
+            if 'code' in allowed and not c in allowed['code']: c = ''
+            code = item.group('t').replace('!`!','`')
+            segments.append((code,c))
+            text = text[:item.start()]+META+text[item.end():]
+        i=item.start()+3
+
+
+    #############################################################
+    # do h1,h2,h3,h4,h5,h6,b,i,ol,ul and normalize spaces
+    #############################################################
+
+    title = regex_title.search(text)
+    if not title: title='Title'
+    else: title=title.group('t')
+
+    text = latex_escape(text,pound=False)
+
+    texts = text.split('## References',1)
+    text = regex_anchor.sub('\\label{\g<t>}', texts[0])
+    if len(texts)==2:
+        text += '\n\\begin{thebibliography}{999}\n'
+        text += regex_bibitem.sub('\n\\\\bibitem{\g<t>}', texts[1])
+        text += '\n\\end{thebibliography}\n'
+
+    text = '\n'.join(t.strip() for t in text.split('\n'))
+    for regex, sub in regex_maps:
+        text = regex.sub(sub,text)
+    text=text.replace('#','\\#')
+    text=text.replace('`',"'")
+
+    #############################################################
+    # process tables and blockquotes
+    #############################################################
+    while True:
+        item = regex_table.search(text)
+        if not item: break
+        c = item.group('c') or ''
+        if 'table' in allowed and not c in allowed['table']: c = ''
+        content = item.group('t')
+        if ' | ' in content:
+            rows = content.replace('\n','\\\\\n').replace(' | ',' & ')
+            row0,row2 = rows.split('\\\\\n',1)
+            cols=row0.count(' & ')+1
+            cal='{'+''.join('l' for j in range(cols))+'}'
+            tabular = '\\begin{center}\n{\\begin{tabular}'+cal+'\\hline\n' + row0+'\\\\ \\hline\n'+row2 + ' \\\\ \\hline\n\\end{tabular}}\n\\end{center}'
+            if row2.count('\n')>20: tabular='\\newpage\n'+tabular
+            text = text[:item.start()] + tabular + text[item.end():]
+        else:
+            text = text[:item.start()] + '\\begin{quote}' + content + '\\end{quote}' + text[item.end():]
+
+    #############################################################
+    # deal with images, videos, audios and links
+    #############################################################
+
+    def sub(x):
+        f=image_mapper(x.group('k'))
+        if not f: return None
+        return '\n\\begin{center}\\includegraphics[width=8cm]{%s}\\end{center}\n' % (f)
+    text = regex_image_width.sub(sub,text)
+    text = regex_image.sub(sub,text)
+
+    text = regex_link.sub('{\\\\footnotesize\\href{\g<k>}{\g<t>}}', text)
+    text = regex_commas.sub('\g<t>',text)
+    text = regex_noindent.sub('\n\\\\noindent \g<t>',text)
+
+    ### fix paths in images
+    regex=re.compile('\\\\_[\w_]*\.(eps|png|jpg|gif)')
+    while True:
+        match=regex.search(text)
+        if not match: break
+        text=text[:match.start()]+text[match.start()+1:]
+    text = regex_quote_left.sub('``',text)
+    text = regex_quote_right.sub("''",text)
+
+    #############################################################
+    # process all code text
+    #############################################################
+    parts = text.split(META)
+    text = parts[0]
+    authors = []
+    for i,(code,b) in enumerate(segments):
+        if code==None:
+            html = META
+        else:
+            if b=='hidden':
+                html=''
+            elif b=='author':
+                author = latex_escape(code.strip())
+                authors.append(author)
+                html=''
+            elif b=='inxx':
+                html='\inxx{%s}' % latex_escape(code)
+            elif b=='cite':
+                html='~\cite{%s}' % latex_escape(code.strip())
+            elif b=='ref':
+                html='~\ref{%s}' % latex_escape(code.strip())
+            elif b=='latex':
+                if '\n' in code:
+                    html='\n\\begin{equation}\n%s\n\\end{equation}\n' % code.strip()
+                else:
+                    html='$%s$' % code.strip()
+            elif b=='latex_eqnarray':
+                code=code.strip()
+                code='\\\\'.join(x.replace('=','&=&',1) for x in code.split('\\\\'))
+                html='\n\\begin{eqnarray}\n%s\n\\end{eqnarray}\n' % code
+            elif b.startswith('latex_'):
+                key=b[6:]
+                html='\\begin{%s}%s\\end{%s}' % (key,code,key)
+            elif b in extra:
+                if code[:1]=='\n': code=code[1:]
+                if code[-1:]=='\n': code=code[:-1]
+                html = extra[b](code)
+            elif code[:1]=='\n' or code[:-1]=='\n':
+                if code[:1]=='\n': code=code[1:]
+                if code[-1:]=='\n': code=code[:-1]
+                if code.startswith('<') or code.startswith('{{') or code.startswith('http'):
+                    html = '\\begin{lstlisting}[keywords={}]\n%s\n\\end{lstlisting}' % code
+                else:
+                    html = '\\begin{lstlisting}\n%s\n\\end{lstlisting}' % code
+            else:
+                if code[:1]=='\n': code=code[1:]
+                if code[-1:]=='\n': code=code[:-1]
+                html = '{\\ft %s}' % latex_escape(code)
+        try:
+            text = text+html+parts[i+1]
+        except:
+            text = text + '... WIKI PROCESSING ERROR ...'
+            break
+    text =  text.replace(' ~\\cite','~\\cite')
+    return text, title, authors
+
+WRAPPER = """
+\\documentclass[12pt]{article}
+\\usepackage{hyperref}
+\\usepackage{listings}
+\\usepackage{upquote}
+\\usepackage{color}
+\\usepackage{graphicx}
+\\usepackage{grffile}
+\\usepackage[utf8x]{inputenc}
+\\definecolor{lg}{rgb}{0.9,0.9,0.9}
+\\definecolor{dg}{rgb}{0.3,0.3,0.3}
+\\def\\ft{\\small\\tt}
+\\lstset{
+   basicstyle=\\footnotesize,
+   breaklines=true, basicstyle=\\ttfamily\\color{black}\\footnotesize,
+   keywordstyle=\\bf\\ttfamily,
+   commentstyle=\\it\\ttfamily,
+   stringstyle=\\color{dg}\\it\\ttfamily,
+   numbers=left, numberstyle=\\color{dg}\\tiny, stepnumber=1, numbersep=5pt,
+   backgroundcolor=\\color{lg}, tabsize=4, showspaces=false,
+   showstringspaces=false
+}
+\\title{%(title)s}
+\\author{%(author)s}
+\\begin{document}
+\\maketitle
+\\tableofcontents
+\\newpage
+%(body)s
+\\end{document}
+"""
+
+def markmin2latex(data, image_mapper=lambda x:x, extra={},
+                  wrapper=WRAPPER):
+    body, title, authors = render(data, extra=extra, image_mapper=image_mapper)
+    author = '\n\\and\n'.join(a.replace('\n','\\\\\n\\footnotesize ') for a in authors)
+    return wrapper % dict(title=title, author=author, body=body)
+
+if __name__ == '__main__':
+    parser = OptionParser()
+    parser.add_option("-i", "--info", dest="info",
+                      help="markmin help")
+    parser.add_option("-t", "--test", dest="test", action="store_true",
+                      default=False)
+    parser.add_option("-n", "--no_wrapper", dest="no_wrapper",
+                      action="store_true",default=False)
+    parser.add_option("-1", "--one", dest="one",action="store_true",
+                      default=False,help="switch section for chapter")
+    parser.add_option("-w", "--wrapper", dest="wrapper", default=False,
+                      help="latex file containing header and footer")
+
+    (options, args) = parser.parse_args()
+    if options.info:
+        import markmin2html
+        markmin2latex(markmin2html.__doc__)
+    elif options.test:
+        doctest.testmod()
+    else:
+        if options.wrapper:
+            fwrapper = open(options.wrapper,'rb')
+            try:
+                wrapper = fwrapper.read()
+            finally:
+                fwrapper.close()
+        elif options.no_wrapper:
+            wrapper  = '%(body)s'
+        else:
+            wrapper = WRAPPER
+        for f in args:
+            fargs = open(f,'r')
+            content_data = []
+            try:
+                content_data.append(fargs.read())
+            finally:
+                fargs.close()
+        content = '\n'.join(content_data)
+        output= markmin2latex(content,wrapper=wrapper)
+        if options.one:
+            output=output.replace(r'\section*{',r'\chapter*{')
+            output=output.replace(r'\section{',r'\chapter{')
+            output=output.replace(r'subsection{',r'section{')
+        print output
+

ADDED   gluon/contrib/markmin/markmin2pdf.py
Index: gluon/contrib/markmin/markmin2pdf.py
==================================================================
--- /dev/null
+++ gluon/contrib/markmin/markmin2pdf.py
@@ -0,0 +1,129 @@
+"""
+Created by Massimo Di Pierro
+Licese BSD
+"""
+
+import subprocess
+import os
+import os.path
+import re
+import sys
+from tempfile import mkstemp, mkdtemp, NamedTemporaryFile
+from markmin2latex import markmin2latex
+
+__all__ = ['markmin2pdf']
+
+def removeall(path):
+
+    ERROR_STR= """Error removing %(path)s, %(error)s """
+    def rmgeneric(path, __func__):
+        try:
+            __func__(path)
+        except OSError, (errno, strerror):
+            print ERROR_STR % {'path' : path, 'error': strerror }
+
+    files=[path]
+
+    while files:
+        file=files[0]
+        if os.path.isfile(file):
+            f=os.remove
+            rmgeneric(file, os.remove)
+            del files[0]
+        elif os.path.isdir(file):
+            nested = os.listdir(file)
+            if not nested:
+                rmgeneric(file, os.rmdir)
+                del files[0]
+            else:
+                files = [os.path.join(file,x) for x in nested] + files
+
+
+def latex2pdf(latex, pdflatex='pdflatex', passes=3):
+    """
+    calls pdflatex in a tempfolder
+
+    Arguments:
+
+    - pdflatex: path to the pdflatex command. Default is just 'pdflatex'.
+    - passes:   defines how often pdflates should be run in the texfile.
+    """
+
+    pdflatex=pdflatex
+    passes=passes
+    warnings=[]
+
+    # setup the envoriment
+    tmpdir = mkdtemp()
+    texfile = open(tmpdir+'/test.tex','wb')
+    texfile.write(latex)
+    texfile.seek(0)
+    texfile.close()
+    texfile = os.path.abspath(texfile.name)
+
+    # start doing some work
+    for i in range(0, passes):
+        logfd,logname = mkstemp()
+        outfile=os.fdopen(logfd)
+        try:
+            ret = subprocess.call([pdflatex,
+                                   '-interaction=nonstopmode',
+                                   '-output-format', 'pdf',
+                                   '-output-directory', tmpdir,
+                                   texfile],
+                                  cwd=os.path.dirname(texfile), stdout=outfile,
+                                  stderr=subprocess.PIPE)
+        finally:
+            outfile.close()
+        re_errors=re.compile('^\!(.*)$',re.M)
+        re_warnings=re.compile('^LaTeX Warning\:(.*)$',re.M)
+        flog = open(logname)
+        try:
+            loglines = flog.read()
+        finally:
+            flog.close()
+        errors=re_errors.findall(loglines)
+        warnings=re_warnings.findall(loglines)
+        os.unlink(logname)
+
+    pdffile=texfile.rsplit('.',1)[0]+'.pdf'
+    if os.path.isfile(pdffile):
+        fpdf = open(pdffile, 'rb')
+        try:
+            data = fpdf.read()
+        finally:
+            fpdf.close()
+    else:
+        data = None
+    removeall(tmpdir)
+    return data, warnings, errors
+
+
+def markmin2pdf(text, image_mapper=lambda x: None, extra={}):
+    return latex2pdf(markmin2latex(text,image_mapper=image_mapper, extra=extra))
+
+
+if __name__ == '__main__':
+    import sys
+    import doctest
+    import markmin2html
+    if sys.argv[1:2]==['-h']:
+        data, warnings, errors = markmin2pdf(markmin2html.__doc__)
+        if errors:
+            print 'ERRORS:'+'\n'.join(errors)
+            print 'WARNGINS:'+'\n'.join(warnings)
+        else:
+            print data
+    elif len(sys.argv)>1:
+        fargv = open(sys.argv[1],'rb')
+        try:
+            data, warnings, errors = markmin2pdf(fargv.read())
+        finally:
+            fargv.close()
+        if errors:
+            print 'ERRORS:'+'\n'.join(errors)
+            print 'WARNGINS:'+'\n'.join(warnings)
+        else:
+            print data
+    else:
+        doctest.testmod()

ADDED   gluon/contrib/memdb.py
Index: gluon/contrib/memdb.py
==================================================================
--- /dev/null
+++ gluon/contrib/memdb.py
@@ -0,0 +1,907 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of web2py Web Framework (Copyrighted, 2007-2009).
+Developed by Massimo Di Pierro <mdipierro@cs.depaul.edu> and
+Robin B <robi123@gmail.com>.
+License: GPL v2
+"""
+
+__all__ = ['MEMDB', 'Field']
+
+import re
+import sys
+import os
+import types
+import datetime
+import thread
+import cStringIO
+import csv
+import copy
+import gluon.validators as validators
+from gluon.storage import Storage
+import random
+
+SQL_DIALECTS = {'memcache': {
+    'boolean': bool,
+    'string': unicode,
+    'text': unicode,
+    'password': unicode,
+    'blob': unicode,
+    'upload': unicode,
+    'integer': long,
+    'double': float,
+    'date': datetime.date,
+    'time': datetime.time,
+    'datetime': datetime.datetime,
+    'id': int,
+    'reference': int,
+    'lower': None,
+    'upper': None,
+    'is null': 'IS NULL',
+    'is not null': 'IS NOT NULL',
+    'extract': None,
+    'left join': None,
+    }}
+
+
+def cleanup(text):
+    if re.compile('[^0-9a-zA-Z_]').findall(text):
+        raise SyntaxError, \
+            'Can\'t cleanup \'%s\': only [0-9a-zA-Z_] allowed in table and field names' % text
+    return text
+
+
+def assert_filter_fields(*fields):
+    for field in fields:
+        if isinstance(field, (Field, Expression)) and field.type\
+             in ['text', 'blob']:
+            raise SyntaxError, 'AppEngine does not index by: %s'\
+                 % field.type
+
+
+def dateobj_to_datetime(object):
+
+    # convert dates,times to datetimes for AppEngine
+
+    if isinstance(object, datetime.date):
+        object = datetime.datetime(object.year, object.month,
+                                   object.day)
+    if isinstance(object, datetime.time):
+        object = datetime.datetime(
+            1970,
+            1,
+            1,
+            object.hour,
+            object.minute,
+            object.second,
+            object.microsecond,
+            )
+    return object
+
+
+def sqlhtml_validators(field_type, length):
+    v = {
+        'boolean': [],
+        'string': validators.IS_LENGTH(length),
+        'text': [],
+        'password': validators.IS_LENGTH(length),
+        'blob': [],
+        'upload': [],
+        'double': validators.IS_FLOAT_IN_RANGE(-1e100, 1e100),
+        'integer': validators.IS_INT_IN_RANGE(-1e100, 1e100),
+        'date': validators.IS_DATE(),
+        'time': validators.IS_TIME(),
+        'datetime': validators.IS_DATETIME(),
+        'reference': validators.IS_INT_IN_RANGE(0, 1e100),
+        }
+    try:
+        return v[field_type[:9]]
+    except KeyError:
+        return []
+
+
+class DALStorage(dict):
+
+    """
+    a dictionary that let you do d['a'] as well as d.a
+    """
+
+    def __getattr__(self, key):
+        return self[key]
+
+    def __setattr__(self, key, value):
+        if key in self:
+            raise SyntaxError, 'Object \'%s\'exists and cannot be redefined' % key
+        self[key] = value
+
+    def __repr__(self):
+        return '<DALStorage ' + dict.__repr__(self) + '>'
+
+
+class SQLCallableList(list):
+
+    def __call__(self):
+        return copy.copy(self)
+
+
+class MEMDB(DALStorage):
+
+    """
+    an instance of this class represents a database connection
+
+    Example::
+
+       db=MEMDB(Client())
+       db.define_table('tablename',Field('fieldname1'),
+                                   Field('fieldname2'))
+    """
+
+    def __init__(self, client):
+        self._dbname = 'memdb'
+        self['_lastsql'] = ''
+        self.tables = SQLCallableList()
+        self._translator = SQL_DIALECTS['memcache']
+        self.client = client
+
+    def define_table(
+        self,
+        tablename,
+        *fields,
+        **args
+        ):
+        tablename = cleanup(tablename)
+        if tablename in dir(self) or tablename[0] == '_':
+            raise SyntaxError, 'invalid table name: %s' % tablename
+        if not tablename in self.tables:
+            self.tables.append(tablename)
+        else:
+            raise SyntaxError, 'table already defined: %s' % tablename
+        t = self[tablename] = Table(self, tablename, *fields)
+        t._create()
+        return t
+
+    def __call__(self, where=''):
+        return Set(self, where)
+
+
+class SQLALL(object):
+
+    def __init__(self, table):
+        self.table = table
+
+
+class Table(DALStorage):
+
+    """
+    an instance of this class represents a database table
+
+    Example::
+
+        db=MEMDB(Client())
+        db.define_table('users',Field('name'))
+        db.users.insert(name='me')
+    """
+
+    def __init__(
+        self,
+        db,
+        tablename,
+        *fields
+        ):
+        self._db = db
+        self._tablename = tablename
+        self.fields = SQLCallableList()
+        self._referenced_by = []
+        fields = list(fields)
+        fields.insert(0, Field('id', 'id'))
+        for field in fields:
+            self.fields.append(field.name)
+            self[field.name] = field
+            field._tablename = self._tablename
+            field._table = self
+            field._db = self._db
+        self.ALL = SQLALL(self)
+
+    def _create(self):
+        fields = []
+        myfields = {}
+        for k in self.fields:
+            field = self[k]
+            attr = {}
+            if not field.type[:9] in ['id', 'reference']:
+                if field.notnull:
+                    attr = dict(required=True)
+            if field.type[:2] == 'id':
+                continue
+            if field.type[:9] == 'reference':
+                referenced = field.type[10:].strip()
+                if not referenced:
+                    raise SyntaxError, \
+                        'Table %s: reference \'%s\' to nothing!' % (self._tablename, k)
+                if not referenced in self._db:
+                    raise SyntaxError, \
+                        'Table: table %s does not exist' % referenced
+                referee = self._db[referenced]
+                ftype = \
+                    self._db._translator[field.type[:9]](
+                        self._db[referenced]._tableobj)
+                if self._tablename in referee.fields:  # ## THIS IS OK
+                    raise SyntaxError, \
+                        'Field: table \'%s\' has same name as a field ' \
+                        'in referenced table \'%s\'' % (self._tablename, referenced)
+                self._db[referenced]._referenced_by.append((self._tablename,
+                        field.name))
+            elif not field.type in self._db._translator\
+                 or not self._db._translator[field.type]:
+                raise SyntaxError, 'Field: unkown field type %s' % field.type
+        self._tableobj = self._db.client
+        return None
+
+    def create(self):
+
+        # nothing to do, here for backward compatility
+
+        pass
+
+    def drop(self):
+
+        # nothing to do, here for backward compatibility
+
+        self._db(self.id > 0).delete()
+
+    def insert(self, **fields):
+        id = self._create_id()
+        if self.update(id, **fields):
+            return long(id)
+        else:
+            return None
+
+    def get(self, id):
+        val = self._tableobj.get(self._id_to_key(id))
+        if val:
+            return Storage(val)
+        else:
+            return None
+
+    def update(self, id, **fields):
+        for field in fields:
+            if not field in fields and self[field].default\
+                 != None:
+                fields[field] = self[field].default
+            if field in fields:
+                fields[field] = obj_represent(fields[field],
+                        self[field].type, self._db)
+        return self._tableobj.set(self._id_to_key(id), fields)
+
+    def delete(self, id):
+        return self._tableobj.delete(self._id_to_key(id))
+
+    def _shard_key(self, shard):
+        return self._id_to_key('s/%s' % shard)
+
+    def _id_to_key(self, id):
+        return '__memdb__/t/%s/k/%s' % (self._tablename, str(id))
+
+    def _create_id(self):
+        shard = random.randint(10, 99)
+        shard_id = self._shard_key(shard)
+        id = self._tableobj.incr(shard_id)
+        if not id:
+            if self._tableobj.set(shard_id, '0'):
+                id = 0
+            else:
+                raise Exception, 'cannot set memcache'
+        return long(str(shard) + str(id))
+
+    def __str__(self):
+        return self._tablename
+
+
+class Expression(object):
+
+    def __init__(
+        self,
+        name,
+        type='string',
+        db=None,
+        ):
+        (self.name, self.type, self._db) = (name, type, db)
+
+    def __str__(self):
+        return self.name
+
+    def __or__(self, other):  # for use in sortby
+        assert_filter_fields(self, other)
+        return Expression(self.name + '|' + other.name, None, None)
+
+    def __invert__(self):
+        assert_filter_fields(self)
+        return Expression('-' + self.name, self.type, None)
+
+    # for use in Query
+
+    def __eq__(self, value):
+        return Query(self, '=', value)
+
+    def __ne__(self, value):
+        return Query(self, '!=', value)
+
+    def __lt__(self, value):
+        return Query(self, '<', value)
+
+    def __le__(self, value):
+        return Query(self, '<=', value)
+
+    def __gt__(self, value):
+        return Query(self, '>', value)
+
+    def __ge__(self, value):
+        return Query(self, '>=', value)
+
+    # def like(self,value): return Query(self,' LIKE ',value)
+    # def belongs(self,value): return Query(self,' IN ',value)
+    # for use in both Query and sortby
+
+    def __add__(self, other):
+        return Expression('%s+%s' % (self, other), 'float', None)
+
+    def __sub__(self, other):
+        return Expression('%s-%s' % (self, other), 'float', None)
+
+    def __mul__(self, other):
+        return Expression('%s*%s' % (self, other), 'float', None)
+
+    def __div__(self, other):
+        return Expression('%s/%s' % (self, other), 'float', None)
+
+
+class Field(Expression):
+
+    """
+    an instance of this class represents a database field
+
+    example::
+
+        a = Field(name, 'string', length=32, required=False,
+                     default=None, requires=IS_NOT_EMPTY(), notnull=False,
+                     unique=False, uploadfield=True)
+
+    to be used as argument of GQLDB.define_table
+
+    allowed field types:
+    string, boolean, integer, double, text, blob,
+    date, time, datetime, upload, password
+
+    strings must have a length or 512 by default.
+    fields should have a default or they will be required in SQLFORMs
+    the requires argument are used to validate the field input in SQLFORMs
+
+    """
+
+    def __init__(
+        self,
+        fieldname,
+        type='string',
+        length=None,
+        default=None,
+        required=False,
+        requires=sqlhtml_validators,
+        ondelete='CASCADE',
+        notnull=False,
+        unique=False,
+        uploadfield=True,
+        ):
+
+        self.name = cleanup(fieldname)
+        if fieldname in dir(Table) or fieldname[0] == '_':
+            raise SyntaxError, 'Field: invalid field name: %s' % fieldname
+        if isinstance(type, Table):
+            type = 'reference ' + type._tablename
+        if not length:
+            length = 512
+        self.type = type  # 'string', 'integer'
+        self.length = length  # the length of the string
+        self.default = default  # default value for field
+        self.required = required  # is this field required
+        self.ondelete = ondelete.upper()  # this is for reference fields only
+        self.notnull = notnull
+        self.unique = unique
+        self.uploadfield = uploadfield
+        if requires == sqlhtml_validators:
+            requires = sqlhtml_validators(type, length)
+        elif requires is None:
+            requires = []
+        self.requires = requires  # list of validators
+
+    def formatter(self, value):
+        if value is None or not self.requires:
+            return value
+        if not isinstance(self.requires, (list, tuple)):
+            requires = [self.requires]
+        else:
+            requires = copy.copy(self.requires)
+        requires.reverse()
+        for item in requires:
+            if hasattr(item, 'formatter'):
+                value = item.formatter(value)
+        return value
+
+    def __str__(self):
+        return '%s.%s' % (self._tablename, self.name)
+
+
+MEMDB.Field = Field  # ## required by gluon/globals.py session.connect
+
+
+def obj_represent(object, fieldtype, db):
+    if object != None:
+        if fieldtype == 'date' and not isinstance(object,
+                datetime.date):
+            (y, m, d) = [int(x) for x in str(object).strip().split('-')]
+            object = datetime.date(y, m, d)
+        elif fieldtype == 'time' and not isinstance(object, datetime.time):
+            time_items = [int(x) for x in str(object).strip().split(':')[:3]]
+            if len(time_items) == 3:
+                (h, mi, s) = time_items
+            else:
+                (h, mi, s) = time_items + [0]
+            object = datetime.time(h, mi, s)
+        elif fieldtype == 'datetime' and not isinstance(object,
+                datetime.datetime):
+            (y, m, d) = [int(x) for x in
+                         str(object)[:10].strip().split('-')]
+            time_items = [int(x) for x in
+                          str(object)[11:].strip().split(':')[:3]]
+            if len(time_items) == 3:
+                (h, mi, s) = time_items
+            else:
+                (h, mi, s) = time_items + [0]
+            object = datetime.datetime(
+                y,
+                m,
+                d,
+                h,
+                mi,
+                s,
+                )
+        elif fieldtype == 'integer' and not isinstance(object, long):
+            object = long(object)
+
+    return object
+
+
+class QueryException:
+
+    def __init__(self, **a):
+        self.__dict__ = a
+
+
+class Query(object):
+
+    """
+    A query object necessary to define a set.
+    It can be stored or can be passed to GQLDB.__call__() to obtain a Set
+
+    Example:
+    query=db.users.name=='Max'
+    set=db(query)
+    records=set.select()
+    """
+
+    def __init__(
+        self,
+        left,
+        op=None,
+        right=None,
+        ):
+        if isinstance(right, (Field, Expression)):
+            raise SyntaxError, \
+                'Query: right side of filter must be a value or entity'
+        if isinstance(left, Field) and left.name == 'id':
+            if op == '=':
+                self.get_one = \
+                    QueryException(tablename=left._tablename,
+                                   id=long(right))
+                return
+            else:
+                raise SyntaxError, 'only equality by id is supported'
+        raise SyntaxError, 'not supported'
+
+    def __str__(self):
+        return str(self.left)
+
+
+class Set(object):
+
+    """
+    As Set represents a set of records in the database,
+    the records are identified by the where=Query(...) object.
+    normally the Set is generated by GQLDB.__call__(Query(...))
+
+    given a set, for example
+       set=db(db.users.name=='Max')
+    you can:
+       set.update(db.users.name='Massimo')
+       set.delete() # all elements in the set
+       set.select(orderby=db.users.id,groupby=db.users.name,limitby=(0,10))
+    and take subsets:
+       subset=set(db.users.id<5)
+    """
+
+    def __init__(self, db, where=None):
+        self._db = db
+        self._tables = []
+        self.filters = []
+        if hasattr(where, 'get_all'):
+            self.where = where
+            self._tables.insert(0, where.get_all)
+        elif hasattr(where, 'get_one') and isinstance(where.get_one,
+                QueryException):
+            self.where = where.get_one
+        else:
+
+            # find out which tables are involved
+
+            if isinstance(where, Query):
+                self.filters = where.left
+            self.where = where
+            self._tables = [field._tablename for (field, op, val) in
+                            self.filters]
+
+    def __call__(self, where):
+        if isinstance(self.where, QueryException) or isinstance(where,
+                QueryException):
+            raise SyntaxError, \
+                'neither self.where nor where can be a QueryException instance'
+        if self.where:
+            return Set(self._db, self.where & where)
+        else:
+            return Set(self._db, where)
+
+    def _get_table_or_raise(self):
+        tablenames = list(set(self._tables))  # unique
+        if len(tablenames) < 1:
+            raise SyntaxError, 'Set: no tables selected'
+        if len(tablenames) > 1:
+            raise SyntaxError, 'Set: no join in appengine'
+        return self._db[tablenames[0]]._tableobj
+
+    def _getitem_exception(self):
+        (tablename, id) = (self.where.tablename, self.where.id)
+        fields = self._db[tablename].fields
+        self.colnames = ['%s.%s' % (tablename, t) for t in fields]
+        item = self._db[tablename].get(id)
+        return (item, fields, tablename, id)
+
+    def _select_except(self):
+        (item, fields, tablename, id) = self._getitem_exception()
+        if not item:
+            return []
+        new_item = []
+        for t in fields:
+            if t == 'id':
+                new_item.append(long(id))
+            else:
+                new_item.append(getattr(item, t))
+        r = [new_item]
+        return Rows(self._db, r, *self.colnames)
+
+    def select(self, *fields, **attributes):
+        """
+        Always returns a Rows object, even if it may be empty
+        """
+
+        if isinstance(self.where, QueryException):
+            return self._select_except()
+        else:
+            raise SyntaxError, 'select arguments not supported'
+
+    def count(self):
+        return len(self.select())
+
+    def delete(self):
+        if isinstance(self.where, QueryException):
+            (item, fields, tablename, id) = self._getitem_exception()
+            if not item:
+                return
+            self._db[tablename].delete(id)
+        else:
+            raise Exception, 'deletion not implemented'
+
+    def update(self, **update_fields):
+        if isinstance(self.where, QueryException):
+            (item, fields, tablename, id) = self._getitem_exception()
+            if not item:
+                return
+            for (key, value) in update_fields.items():
+                setattr(item, key, value)
+            self._db[tablename].update(id, **item)
+        else:
+            raise Exception, 'update not implemented'
+
+
+def update_record(
+    t,
+    s,
+    id,
+    a,
+    ):
+    item = s.get(id)
+    for (key, value) in a.items():
+        t[key] = value
+        setattr(item, key, value)
+    s.update(id, **item)
+
+
+class Rows(object):
+
+    """
+    A wrapper for the return value of a select. It basically represents a table.
+    It has an iterator and each row is represented as a dictionary.
+    """
+
+    # ## this class still needs some work to care for ID/OID
+
+    def __init__(
+        self,
+        db,
+        response,
+        *colnames
+        ):
+        self._db = db
+        self.colnames = colnames
+        self.response = response
+
+    def __len__(self):
+        return len(self.response)
+
+    def __getitem__(self, i):
+        if i >= len(self.response) or i < 0:
+            raise SyntaxError, 'Rows: no such row: %i' % i
+        if len(self.response[0]) != len(self.colnames):
+            raise SyntaxError, 'Rows: internal error'
+        row = DALStorage()
+        for j in xrange(len(self.colnames)):
+            value = self.response[i][j]
+            if isinstance(value, unicode):
+                value = value.encode('utf-8')
+            packed = self.colnames[j].split('.')
+            try:
+                (tablename, fieldname) = packed
+            except:
+                if not '_extra' in row:
+                    row['_extra'] = DALStorage()
+                row['_extra'][self.colnames[j]] = value
+                continue
+            table = self._db[tablename]
+            field = table[fieldname]
+            if not tablename in row:
+                row[tablename] = DALStorage()
+            if field.type[:9] == 'reference':
+                referee = field.type[10:].strip()
+                rid = value
+                row[tablename][fieldname] = rid
+            elif field.type == 'boolean' and value != None:
+
+                # row[tablename][fieldname]=Set(self._db[referee].id==rid)
+
+                if value == True or value == 'T':
+                    row[tablename][fieldname] = True
+                else:
+                    row[tablename][fieldname] = False
+            elif field.type == 'date' and value != None\
+                 and not isinstance(value, datetime.date):
+                (y, m, d) = [int(x) for x in
+                             str(value).strip().split('-')]
+                row[tablename][fieldname] = datetime.date(y, m, d)
+            elif field.type == 'time' and value != None\
+                 and not isinstance(value, datetime.time):
+                time_items = [int(x) for x in
+                              str(value).strip().split(':')[:3]]
+                if len(time_items) == 3:
+                    (h, mi, s) = time_items
+                else:
+                    (h, mi, s) = time_items + [0]
+                row[tablename][fieldname] = datetime.time(h, mi, s)
+            elif field.type == 'datetime' and value != None\
+                 and not isinstance(value, datetime.datetime):
+                (y, m, d) = [int(x) for x in
+                             str(value)[:10].strip().split('-')]
+                time_items = [int(x) for x in
+                              str(value)[11:].strip().split(':')[:3]]
+                if len(time_items) == 3:
+                    (h, mi, s) = time_items
+                else:
+                    (h, mi, s) = time_items + [0]
+                row[tablename][fieldname] = datetime.datetime(
+                    y,
+                    m,
+                    d,
+                    h,
+                    mi,
+                    s,
+                    )
+            else:
+                row[tablename][fieldname] = value
+            if fieldname == 'id':
+                id = row[tablename].id
+                row[tablename].update_record = lambda t = row[tablename], \
+                    s = self._db[tablename], id = id, **a: update_record(t,
+                        s, id, a)
+                for (referee_table, referee_name) in \
+                    table._referenced_by:
+                    s = self._db[referee_table][referee_name]
+                    row[tablename][referee_table] = Set(self._db, s
+                             == id)
+        if len(row.keys()) == 1:
+            return row[row.keys()[0]]
+        return row
+
+    def __iter__(self):
+        """
+        iterator over records
+        """
+
+        for i in xrange(len(self)):
+            yield self[i]
+
+    def __str__(self):
+        """
+        serializes the table into a csv file
+        """
+
+        s = cStringIO.StringIO()
+        writer = csv.writer(s)
+        writer.writerow(self.colnames)
+        c = len(self.colnames)
+        for i in xrange(len(self)):
+            row = [self.response[i][j] for j in xrange(c)]
+            for k in xrange(c):
+                if isinstance(row[k], unicode):
+                    row[k] = row[k].encode('utf-8')
+            writer.writerow(row)
+        return s.getvalue()
+
+    def xml(self):
+        """
+        serializes the table using sqlhtml.SQLTABLE (if present)
+        """
+
+        return sqlhtml.SQLTABLE(self).xml()
+
+
+def test_all():
+    """
+    How to run from web2py dir:
+     export PYTHONPATH=.:YOUR_PLATFORMS_APPENGINE_PATH
+     python gluon/contrib/memdb.py
+
+    Setup the UTC timezone and database stubs
+
+    >>> import os
+    >>> os.environ['TZ'] = 'UTC'
+    >>> import time
+    >>> if hasattr(time, 'tzset'):
+    ...   time.tzset()
+    >>>
+    >>> from google.appengine.api import apiproxy_stub_map
+    >>> from google.appengine.api.memcache import memcache_stub
+    >>> apiproxy_stub_map.apiproxy = apiproxy_stub_map.APIProxyStubMap()
+    >>> apiproxy_stub_map.apiproxy.RegisterStub('memcache', memcache_stub.MemcacheServiceStub())
+
+        Create a table with all possible field types
+    >>> from google.appengine.api.memcache import Client
+    >>> db=MEMDB(Client())
+    >>> tmp=db.define_table('users',              Field('stringf','string',length=32,required=True),              Field('booleanf','boolean',default=False),              Field('passwordf','password',notnull=True),              Field('blobf','blob'),              Field('uploadf','upload'),              Field('integerf','integer',unique=True),              Field('doublef','double',unique=True,notnull=True),              Field('datef','date',default=datetime.date.today()),              Field('timef','time'),              Field('datetimef','datetime'),              migrate='test_user.table')
+
+   Insert a field
+
+    >>> user_id = db.users.insert(stringf='a',booleanf=True,passwordf='p',blobf='0A',                       uploadf=None, integerf=5,doublef=3.14,                       datef=datetime.date(2001,1,1),                       timef=datetime.time(12,30,15),                       datetimef=datetime.datetime(2002,2,2,12,30,15))
+    >>> user_id != None
+    True
+
+    Select all
+
+    # >>> all = db().select(db.users.ALL)
+
+    Drop the table
+
+    # >>> db.users.drop()
+
+    Select many entities
+
+    >>> tmp = db.define_table(\"posts\",              Field('body','text'),              Field('total','integer'),              Field('created_at','datetime'))
+    >>> many = 20   #2010 # more than 1000 single fetch limit (it can be slow)
+    >>> few = 5
+    >>> most = many - few
+    >>> 0 < few < most < many
+    True
+    >>> for i in range(many):
+    ...     f=db.posts.insert(body='',                total=i,created_at=datetime.datetime(2008, 7, 6, 14, 15, 42, i))
+    >>>
+
+    # test timezones
+    >>> class TZOffset(datetime.tzinfo):
+    ...   def __init__(self,offset=0):
+    ...     self.offset = offset
+    ...   def utcoffset(self, dt): return datetime.timedelta(hours=self.offset)
+    ...   def dst(self, dt): return datetime.timedelta(0)
+    ...   def tzname(self, dt): return 'UTC' + str(self.offset)
+    ...
+    >>> SERVER_OFFSET = -8
+    >>>
+    >>> stamp = datetime.datetime(2008, 7, 6, 14, 15, 42, 828201)
+    >>> post_id = db.posts.insert(created_at=stamp,body='body1')
+    >>> naive_stamp = db(db.posts.id==post_id).select()[0].created_at
+    >>> utc_stamp=naive_stamp.replace(tzinfo=TZOffset())
+    >>> server_stamp = utc_stamp.astimezone(TZOffset(SERVER_OFFSET))
+    >>> stamp == naive_stamp
+    True
+    >>> utc_stamp == server_stamp
+    True
+    >>> rows = db(db.posts.id==post_id).select()
+    >>> len(rows) == 1
+    True
+    >>> rows[0].body == 'body1'
+    True
+    >>> db(db.posts.id==post_id).delete()
+    >>> rows = db(db.posts.id==post_id).select()
+    >>> len(rows) == 0
+    True
+
+    >>> id = db.posts.insert(total='0')   # coerce str to integer
+    >>> rows = db(db.posts.id==id).select()
+    >>> len(rows) == 1
+    True
+    >>> rows[0].total == 0
+    True
+
+    Examples of insert, select, update, delete
+
+    >>> tmp=db.define_table('person', Field('name'), Field('birth','date'), migrate='test_person.table')
+    >>> marco_id=db.person.insert(name=\"Marco\",birth='2005-06-22')
+    >>> person_id=db.person.insert(name=\"Massimo\",birth='1971-12-21')
+    >>> me=db(db.person.id==person_id).select()[0] # test select
+    >>> me.name
+    'Massimo'
+    >>> db(db.person.id==person_id).update(name='massimo') # test update
+    >>> me = db(db.person.id==person_id).select()[0]
+    >>> me.name
+    'massimo'
+    >>> str(me.birth)
+    '1971-12-21'
+
+    # resave date to ensure it comes back the same
+    >>> me=db(db.person.id==person_id).update(birth=me.birth) # test update
+    >>> me = db(db.person.id==person_id).select()[0]
+    >>> me.birth
+    datetime.date(1971, 12, 21)
+    >>> db(db.person.id==marco_id).delete() # test delete
+    >>> len(db(db.person.id==marco_id).select())
+    0
+
+    Update a single record
+
+    >>> me.update_record(name=\"Max\")
+    >>> me.name
+    'Max'
+    >>> me = db(db.person.id == person_id).select()[0]
+    >>> me.name
+    'Max'
+
+    """
+
+SQLField = Field
+SQLTable = Table
+SQLXorable = Expression
+SQLQuery = Query
+SQLSet = Set
+SQLRows = Rows
+SQLStorage = DALStorage
+
+if __name__ == '__main__':
+    import doctest
+    doctest.testmod()
+

ADDED   gluon/contrib/pam.py
Index: gluon/contrib/pam.py
==================================================================
--- /dev/null
+++ gluon/contrib/pam.py
@@ -0,0 +1,124 @@
+# (c) 2007 Chris AtLee <chris@atlee.ca>
+# Licensed under the MIT license:
+# http://www.opensource.org/licenses/mit-license.php
+"""
+PAM module for python
+
+Provides an authenticate function that will allow the caller to authenticate
+a user against the Pluggable Authentication Modules (PAM) on the system.
+
+Implemented using ctypes, so no compilation is necessary.
+"""
+__all__ = ['authenticate']
+
+from ctypes import CDLL, POINTER, Structure, CFUNCTYPE, cast, pointer, sizeof
+from ctypes import c_void_p, c_uint, c_char_p, c_char, c_int
+from ctypes.util import find_library
+
+LIBPAM = CDLL(find_library("pam"))
+LIBC = CDLL(find_library("c"))
+
+CALLOC = LIBC.calloc
+CALLOC.restype = c_void_p
+CALLOC.argtypes = [c_uint, c_uint]
+
+STRDUP = LIBC.strdup
+STRDUP.argstypes = [c_char_p]
+STRDUP.restype = POINTER(c_char) # NOT c_char_p !!!!
+
+# Various constants
+PAM_PROMPT_ECHO_OFF = 1
+PAM_PROMPT_ECHO_ON = 2
+PAM_ERROR_MSG = 3
+PAM_TEXT_INFO = 4
+
+class PamHandle(Structure):
+    """wrapper class for pam_handle_t"""
+    _fields_ = [
+            ("handle", c_void_p)
+            ]
+
+    def __init__(self):
+        Structure.__init__(self)
+        self.handle = 0
+
+class PamMessage(Structure):
+    """wrapper class for pam_message structure"""
+    _fields_ = [
+            ("msg_style", c_int),
+            ("msg", c_char_p),
+            ]
+
+    def __repr__(self):
+        return "<PamMessage %i '%s'>" % (self.msg_style, self.msg)
+
+class PamResponse(Structure):
+    """wrapper class for pam_response structure"""
+    _fields_ = [
+            ("resp", c_char_p),
+            ("resp_retcode", c_int),
+            ]
+
+    def __repr__(self):
+        return "<PamResponse %i '%s'>" % (self.resp_retcode, self.resp)
+
+CONV_FUNC = CFUNCTYPE(c_int,
+        c_int, POINTER(POINTER(PamMessage)),
+               POINTER(POINTER(PamResponse)), c_void_p)
+
+class PamConv(Structure):
+    """wrapper class for pam_conv structure"""
+    _fields_ = [
+            ("conv", CONV_FUNC),
+            ("appdata_ptr", c_void_p)
+            ]
+
+PAM_START = LIBPAM.pam_start
+PAM_START.restype = c_int
+PAM_START.argtypes = [c_char_p, c_char_p, POINTER(PamConv),
+        POINTER(PamHandle)]
+
+PAM_AUTHENTICATE = LIBPAM.pam_authenticate
+PAM_AUTHENTICATE.restype = c_int
+PAM_AUTHENTICATE.argtypes = [PamHandle, c_int]
+
+def authenticate(username, password, service='login'):
+    """Returns True if the given username and password authenticate for the
+    given service.  Returns False otherwise
+
+    ``username``: the username to authenticate
+
+    ``password``: the password in plain text
+
+    ``service``: the PAM service to authenticate against.
+                 Defaults to 'login'"""
+    @CONV_FUNC
+    def my_conv(n_messages, messages, p_response, app_data):
+        """Simple conversation function that responds to any
+        prompt where the echo is off with the supplied password"""
+        # Create an array of n_messages response objects
+        addr = CALLOC(n_messages, sizeof(PamResponse))
+        p_response[0] = cast(addr, POINTER(PamResponse))
+        for i in range(n_messages):
+            if messages[i].contents.msg_style == PAM_PROMPT_ECHO_OFF:
+                pw_copy = STRDUP(str(password))
+                p_response.contents[i].resp = cast(pw_copy, c_char_p)
+                p_response.contents[i].resp_retcode = 0
+        return 0
+
+    handle = PamHandle()
+    conv = PamConv(my_conv, 0)
+    retval = PAM_START(service, username, pointer(conv), pointer(handle))
+
+    if retval != 0:
+        # TODO: This is not an authentication error, something
+        # has gone wrong starting up PAM
+        return False
+
+    retval = PAM_AUTHENTICATE(handle, 0)
+    return retval == 0
+
+if __name__ == "__main__":
+    import getpass
+    print authenticate(getpass.getuser(), getpass.getpass())
+

ADDED   gluon/contrib/populate.py
Index: gluon/contrib/populate.py
==================================================================
--- /dev/null
+++ gluon/contrib/populate.py
cannot compute difference between binary files

ADDED   gluon/contrib/pyfpdf/README
Index: gluon/contrib/pyfpdf/README
==================================================================
--- /dev/null
+++ gluon/contrib/pyfpdf/README
@@ -0,0 +1,1 @@
+Read more about this http://code.google.com/p/pyfpdf

ADDED   gluon/contrib/pyfpdf/__init__.py
Index: gluon/contrib/pyfpdf/__init__.py
==================================================================
--- /dev/null
+++ gluon/contrib/pyfpdf/__init__.py
@@ -0,0 +1,4 @@
+from fpdf import FPDF
+from html import HTMLMixin
+from template import Template
+

ADDED   gluon/contrib/pyfpdf/designer.py
Index: gluon/contrib/pyfpdf/designer.py
==================================================================
--- /dev/null
+++ gluon/contrib/pyfpdf/designer.py
@@ -0,0 +1,735 @@
+#!/usr/bin/python
+# -*- coding: latin-1 -*-
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 3, or (at your option) any later
+# version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY
+# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+
+"Visual Template designer for PyFPDF (using wxPython OGL library)"
+
+__author__ = "Mariano Reingart <reingart@gmail.com>"
+__copyright__ = "Copyright (C) 2011 Mariano Reingart"
+__license__ = "GPL 3.0"
+__version__ = "1.01a"
+
+# Based on:
+#  * pySjetch.py wxPython sample application
+#  * OGL.py and other wxPython demo modules
+
+
+import os, sys
+import wx
+import wx.lib.ogl as ogl
+from wx.lib.wordwrap import wordwrap
+
+DEBUG = True
+
+
+class CustomDialog(wx.Dialog):
+    "A dinamyc dialog to ask user about arbitrary fields"
+
+    def __init__(
+            self, parent, ID, title, size=wx.DefaultSize, pos=wx.DefaultPosition,
+            style=wx.DEFAULT_DIALOG_STYLE, fields=None, data=None,
+            ):
+
+        wx.Dialog.__init__ (self, parent, ID, title, pos, size, style)
+
+        sizer = wx.BoxSizer(wx.VERTICAL)
+
+        self.textctrls = {}
+        for field in fields:
+            box = wx.BoxSizer(wx.HORIZONTAL)
+            label = wx.StaticText(self, -1, field)
+            label.SetHelpText("This is the help text for the label")
+            box.Add(label, 1, wx.ALIGN_CENTRE|wx.ALL, 5)
+            text = wx.TextCtrl(self, -1, "", size=(80,-1))
+            text.SetHelpText("Here's some help text for field #1")
+            if field in data:
+                text.SetValue(repr(data[field]))
+            box.Add(text, 1, wx.ALIGN_CENTRE|wx.ALL, 1)
+            sizer.Add(box, 0, wx.GROW|wx.ALIGN_CENTER_VERTICAL|wx.ALL, 1)
+            self.textctrls[field] = text
+
+        line = wx.StaticLine(self, -1, size=(20,-1), style=wx.LI_HORIZONTAL)
+        sizer.Add(line, 0, wx.GROW|wx.ALIGN_CENTER_VERTICAL|wx.RIGHT|wx.TOP, 5)
+
+        btnsizer = wx.StdDialogButtonSizer()
+
+        btn = wx.Button(self, wx.ID_OK)
+        btn.SetHelpText("The OK button completes the dialog")
+        btn.SetDefault()
+        btnsizer.AddButton(btn)
+
+        btn = wx.Button(self, wx.ID_CANCEL)
+        btn.SetHelpText("The Cancel button cancels the dialog. (Cool, huh?)")
+        btnsizer.AddButton(btn)
+        btnsizer.Realize()
+
+        sizer.Add(btnsizer, 0, wx.ALIGN_CENTER_VERTICAL|wx.ALL, 5)
+
+        self.SetSizer(sizer)
+        sizer.Fit(self)
+
+    @classmethod
+    def do_input(Class, parent, title, fields, data):
+        dlg = Class(parent, -1, title, size=(350, 200),
+                         style=wx.DEFAULT_DIALOG_STYLE, # & ~wx.CLOSE_BOX,
+                        fields=fields, data=data
+                         )
+        dlg.CenterOnScreen()
+        while 1:
+            val = dlg.ShowModal()
+            if val == wx.ID_OK:
+                values = {}
+                for field in fields:
+                    try:
+                        values[field] = eval(dlg.textctrls[field].GetValue())
+                    except Exception, e:
+                        msg = wx.MessageDialog(parent, unicode(e),
+                               "Error in field %s" % field,
+                               wx.OK | wx.ICON_INFORMATION
+                               )
+                        msg.ShowModal()
+                        msg.Destroy()
+                        break
+                else:
+                    return dict([(field, values[field]) for field in fields])
+            else:
+                return None
+
+
+class MyEvtHandler(ogl.ShapeEvtHandler):
+    "Custom Event Handler for Shapes"
+    def __init__(self, callback):
+        ogl.ShapeEvtHandler.__init__(self)
+        self.callback = callback
+
+    def OnLeftClick(self, x, y, keys=0, attachment=0):
+        shape = self.GetShape()
+        canvas = shape.GetCanvas()
+        dc = wx.ClientDC(canvas)
+        canvas.PrepareDC(dc)
+
+        if shape.Selected() and keys & ogl.KEY_SHIFT:
+            shape.Select(False, dc)
+            #canvas.Redraw(dc)
+            canvas.Refresh(False)
+        else:
+            redraw = False
+            shapeList = canvas.GetDiagram().GetShapeList()
+            toUnselect = []
+
+            for s in shapeList:
+                if s.Selected() and not keys & ogl.KEY_SHIFT:
+                    # If we unselect it now then some of the objects in
+                    # shapeList will become invalid (the control points are
+                    # shapes too!) and bad things will happen...
+                    toUnselect.append(s)
+
+            shape.Select(True, dc)
+
+            if toUnselect:
+                for s in toUnselect:
+                    s.Select(False, dc)
+                ##canvas.Redraw(dc)
+                canvas.Refresh(False)
+
+        self.callback()
+
+    def OnEndDragLeft(self, x, y, keys=0, attachment=0):
+        shape = self.GetShape()
+        ogl.ShapeEvtHandler.OnEndDragLeft(self, x, y, keys, attachment)
+
+        if not shape.Selected():
+            self.OnLeftClick(x, y, keys, attachment)
+
+        self.callback()
+
+    def OnSizingEndDragLeft(self, pt, x, y, keys, attch):
+        ogl.ShapeEvtHandler.OnSizingEndDragLeft(self, pt, x, y, keys, attch)
+        self.callback()
+
+    def OnMovePost(self, dc, x, y, oldX, oldY, display):
+        shape = self.GetShape()
+        ogl.ShapeEvtHandler.OnMovePost(self, dc, x, y, oldX, oldY, display)
+        self.callback()
+        if "wxMac" in wx.PlatformInfo:
+            shape.GetCanvas().Refresh(False)
+
+    def OnLeftDoubleClick(self, x, y, keys = 0, attachment = 0):
+        self.callback("LeftDoubleClick")
+
+    def OnRightClick(self, *dontcare):
+        self.callback("RightClick")
+
+
+class Element(object):
+    "Visual class that represent a placeholder in the template"
+
+    fields = ['name', 'type',
+                  'x1', 'y1', 'x2', 'y2',
+                  'font', 'size',
+                  'bold', 'italic', 'underline',
+                  'foreground', 'background',
+                  'align', 'text', 'priority',]
+
+    def __init__(self, canvas=None, frame=None, zoom=5.0, static=False, **kwargs):
+        self.kwargs = kwargs
+        self.zoom = zoom
+        self.frame = frame
+        self.canvas = canvas
+        self.static = static
+
+        name = kwargs['name']
+        kwargs['type']
+        type = kwargs['type']
+
+        x, y, w, h = self.set_coordinates(kwargs['x1'], kwargs['y1'], kwargs['x2'], kwargs['y2'])
+
+        text = kwargs['text']
+
+        shape = self.shape = ogl.RectangleShape(w, h)
+
+        if not static:
+            shape.SetDraggable(True, True)
+
+        shape.SetX(x)
+        shape.SetY(y)
+        #if pen:    shape.SetPen(pen)
+        #if brush:  shape.SetBrush(brush)
+        shape.SetBrush(wx.TRANSPARENT_BRUSH)
+
+        if type not in ('L', 'B', 'BC'):
+            if not static:
+                pen = wx.LIGHT_GREY_PEN
+            else:
+                pen = wx.RED_PEN
+            shape.SetPen(pen)
+
+        self.text = kwargs['text']
+
+        evthandler = MyEvtHandler(self.evt_callback)
+        evthandler.SetShape(shape)
+        evthandler.SetPreviousHandler(shape.GetEventHandler())
+        shape.SetEventHandler(evthandler)
+        shape.SetCentreResize(False)
+        shape.SetMaintainAspectRatio(False)
+
+        canvas.AddShape( shape )
+
+    @classmethod
+    def new(Class, parent):
+        data = dict(name='some_name', type='T',
+                    x1=5.0, y1=5.0, x2=100.0, y2=10.0,
+                    font="Arial", size=12,
+                 bold=False, italic=False, underline=False,
+                    foreground= 0x000000, background=0xFFFFFF,
+                    align="L", text="", priority=0)
+        data = CustomDialog.do_input(parent, 'New element', Class.fields, data)
+        if data:
+            return Class(canvas=parent.canvas, frame=parent, **data)
+
+    def edit(self):
+        "Edit current element (show a dialog box with all fields)"
+        data = self.kwargs.copy()
+        x1, y1, x2, y2 = self.get_coordinates()
+        data.update(dict(name=self.name,
+                         text=self.text,
+                         x1=x1, y1=y1, x2=x2, y2=y2,
+                       ))
+        data = CustomDialog.do_input(self.frame, 'Edit element', self.fields, data)
+        if data:
+            self.kwargs.update(data)
+            self.name = data['name']
+            self.text = data['text']
+            x,y, w, h = self.set_coordinates(data['x1'], data['y1'], data['x2'], data['y2'])
+            self.shape.SetX(x)
+            self.shape.SetY(y)
+            self.shape.SetWidth(w)
+            self.shape.SetHeight(h)
+            self.canvas.Refresh(False)
+            self.canvas.GetDiagram().ShowAll(1)
+
+    def edit_text(self):
+        "Allow text edition (i.e. for doubleclick)"
+        dlg = wx.TextEntryDialog(
+            self.frame, 'Text for %s' % self.name,
+            'Edit Text', '')
+        if self.text:
+            dlg.SetValue(self.text)
+        if dlg.ShowModal() == wx.ID_OK:
+            self.text = dlg.GetValue().encode("latin1")
+        dlg.Destroy()
+
+    def copy(self):
+        "Return an identical duplicate"
+        kwargs = self.as_dict()
+        element = Element(canvas=self.canvas, frame=self.frame, zoom=self.zoom, static=self.static, **kwargs)
+        return element
+
+    def remove(self):
+        "Erases visual shape from OGL canvas (element must be deleted manually)"
+        self.canvas.RemoveShape(self.shape)
+
+    def move(self, dx, dy):
+        "Change pdf coordinates (converting to wx internal values)"
+        x1, y1, x2, y2 = self.get_coordinates()
+        x1 += dx
+        x2 += dx
+        y1 += dy
+        y2 += dy
+        x, y, w, h = self.set_coordinates(x1, y1, x2, y2)
+        self.shape.SetX(x)
+        self.shape.SetY(y)
+
+    def evt_callback(self, evt_type=None):
+        "Event dispatcher"
+        if evt_type=="LeftDoubleClick":
+            self.edit_text()
+        if evt_type=='RightClick':
+            self.edit()
+
+        # update the status bar
+        x1, y1, x2, y2 = self.get_coordinates()
+        self.frame.SetStatusText("%s (%0.2f, %0.2f) - (%0.2f, %0.2f)" %
+                                        (self.name, x1, y1, x2, y2))
+
+    def get_coordinates(self):
+        "Convert from wx to pdf coordinates"
+        x, y = self.shape.GetX(), self.shape.GetY()
+        w, h = self.shape.GetBoundingBoxMax()
+        w -= 1
+        h -= 1
+        x1 = x/self.zoom - w/self.zoom/2.0
+        x2 = x/self.zoom + w/self.zoom/2.0
+        y1 = y/self.zoom - h/self.zoom/2.0
+        y2 = y/self.zoom + h/self.zoom/2.0
+        return x1, y1, x2, y2
+
+    def set_coordinates(self, x1, y1, x2, y2):
+        "Convert from pdf to wx coordinates"
+        x1 = x1 * self.zoom
+        x2 = x2 * self.zoom
+        y1 = y1 * self.zoom
+        y2 = y2 * self.zoom
+
+        # shapes seems to be centred, pdf coord not
+        w = max(x1, x2) - min(x1, x2) + 1
+        h = max(y1, y2) - min(y1, y2) + 1
+        x = (min(x1, x2) + w/2.0)
+        y = (min(y1, y2) + h/2.0)
+        return x, y, w, h
+
+    def text(self, txt=None):
+        if txt is not None:
+            if not isinstance(txt,str):
+                txt = str(txt)
+            self.kwargs['text'] = txt
+            self.shape.ClearText()
+            for line in txt.split('\n'):
+                self.shape.AddText(unicode(line, "latin1"))
+            self.canvas.Refresh(False)
+        return self.kwargs['text']
+    text = property(text, text)
+
+    def set_x(self, x):
+        self.shape.SetX(x)
+        self.canvas.Refresh(False)
+        self.evt_callback()
+    def set_y(self, y):
+        self.shape.SetY(y)
+        self.canvas.Refresh(False)
+        self.evt_callback()
+    def get_x(self):
+        return self.shape.GetX()
+    def get_y(self):
+        return self.shape.GetY()
+
+    x = property(get_x, set_x)
+    y = property(get_y, set_y)
+
+    def selected(self, sel=None):
+        if sel is not None:
+            print "Setting Select(%s)" % sel
+            self.shape.Select(sel)
+        return self.shape.Selected()
+    selected = property(selected, selected)
+
+    def name(self, name=None):
+        if name is not None:
+            self.kwargs['name'] = name
+        return self.kwargs['name']
+    name = property(name, name)
+
+    def __contains__(self, k):
+        "Implement in keyword for searchs"
+        return k in self.name.lower() or self.text and k in self.text.lower()
+
+    def as_dict(self):
+        "Return a dictionary representation, used by pyfpdf"
+        d = self.kwargs
+        x1, y1, x2, y2 = self.get_coordinates()
+        d.update({
+                'x1': x1, 'y1': y1, 'x2': x2, 'y2': y2,
+                'text': self.text})
+        return d
+
+
+class AppFrame(wx.Frame):
+    "OGL Designer main window"
+    title = "PyFPDF Template Designer (wx OGL)"
+
+    def __init__(self):
+        wx.Frame.__init__( self,
+                          None, -1, self.title,
+                          size=(640,480),
+                          style=wx.DEFAULT_FRAME_STYLE )
+        sys.excepthook  = self.except_hook
+        self.filename = ""
+        # Create a toolbar:
+        tsize = (16,16)
+        self.toolbar = self.CreateToolBar(wx.TB_HORIZONTAL | wx.NO_BORDER | wx.TB_FLAT)
+
+        artBmp = wx.ArtProvider.GetBitmap
+        self.toolbar.AddSimpleTool(
+            wx.ID_NEW, artBmp(wx.ART_NEW, wx.ART_TOOLBAR, tsize), "New")
+        self.toolbar.AddSimpleTool(
+            wx.ID_OPEN, artBmp(wx.ART_FILE_OPEN, wx.ART_TOOLBAR, tsize), "Open")
+        self.toolbar.AddSimpleTool(
+            wx.ID_SAVE, artBmp(wx.ART_FILE_SAVE, wx.ART_TOOLBAR, tsize), "Save")
+        self.toolbar.AddSimpleTool(
+            wx.ID_SAVEAS, artBmp(wx.ART_FILE_SAVE_AS, wx.ART_TOOLBAR, tsize),
+            "Save As...")
+        #-------
+        self.toolbar.AddSeparator()
+        self.toolbar.AddSimpleTool(
+            wx.ID_UNDO, artBmp(wx.ART_UNDO, wx.ART_TOOLBAR, tsize), "Undo")
+        self.toolbar.AddSimpleTool(
+            wx.ID_REDO, artBmp(wx.ART_REDO, wx.ART_TOOLBAR, tsize), "Redo")
+        self.toolbar.AddSeparator()
+        #-------
+        self.toolbar.AddSimpleTool(
+            wx.ID_CUT, artBmp(wx.ART_CUT, wx.ART_TOOLBAR, tsize), "Remove")
+        self.toolbar.AddSimpleTool(
+            wx.ID_COPY, artBmp(wx.ART_COPY, wx.ART_TOOLBAR, tsize), "Duplicate")
+        self.toolbar.AddSimpleTool(
+            wx.ID_PASTE, artBmp(wx.ART_PASTE, wx.ART_TOOLBAR, tsize), "Insert")
+        self.toolbar.AddSeparator()
+        self.toolbar.AddSimpleTool(
+            wx.ID_FIND, artBmp(wx.ART_FIND, wx.ART_TOOLBAR, tsize), "Find")
+        self.toolbar.AddSeparator()
+        self.toolbar.AddSimpleTool(
+            wx.ID_PRINT, artBmp(wx.ART_PRINT, wx.ART_TOOLBAR, tsize), "Print")
+        self.toolbar.AddSimpleTool(
+            wx.ID_ABOUT, artBmp(wx.ART_HELP, wx.ART_TOOLBAR, tsize), "About")
+
+        self.toolbar.Realize()
+
+        self.toolbar.EnableTool(wx.ID_SAVEAS,       False)
+        self.toolbar.EnableTool(wx.ID_UNDO,         False)
+        self.toolbar.EnableTool(wx.ID_REDO,         False)
+
+        menu_handlers = [
+            (wx.ID_NEW, self.do_new),
+            (wx.ID_OPEN, self.do_open),
+            (wx.ID_SAVE, self.do_save),
+            (wx.ID_PRINT, self.do_print),
+            (wx.ID_FIND, self.do_find),
+            (wx.ID_CUT, self.do_cut),
+            (wx.ID_COPY, self.do_copy),
+            (wx.ID_PASTE, self.do_paste),
+            (wx.ID_ABOUT, self.do_about),
+        ]
+        for menu_id, handler in menu_handlers:
+            self.Bind(wx.EVT_MENU, handler, id = menu_id)
+
+        sizer = wx.BoxSizer(wx.VERTICAL)
+        # put stuff into sizer
+
+        self.CreateStatusBar()
+
+        canvas = self.canvas = ogl.ShapeCanvas( self )
+        maxWidth  = 1500
+        maxHeight = 2000
+        canvas.SetScrollbars(20, 20, maxWidth/20, maxHeight/20)
+        sizer.Add( canvas, 1, wx.GROW )
+
+        canvas.SetBackgroundColour("WHITE") #
+
+        diagram = self.diagram = ogl.Diagram()
+        canvas.SetDiagram( diagram )
+        diagram.SetCanvas( canvas )
+        diagram.SetSnapToGrid( False )
+
+        # apply sizer
+        self.SetSizer(sizer)
+        self.SetAutoLayout(1)
+        self.Show(1)
+
+        self.Bind(wx.EVT_CHAR_HOOK, self.on_key_event)
+        self.elements = []
+
+    def on_key_event(self, event):
+        """ Respond to a keypress event.
+
+            We make the arrow keys move the selected object(s) by one pixel in
+            the given direction.
+        """
+        step = 1
+        if event.ControlDown():
+            step = 20
+
+        if event.GetKeyCode() == wx.WXK_UP:
+            self.move_elements(0, -step)
+        elif event.GetKeyCode() == wx.WXK_DOWN:
+            self.move_elements(0, step)
+        elif event.GetKeyCode() == wx.WXK_LEFT:
+            self.move_elements(-step, 0)
+        elif event.GetKeyCode() == wx.WXK_RIGHT:
+            self.move_elements(step, 0)
+        elif event.GetKeyCode() == wx.WXK_DELETE:
+            self.do_cut()
+        else:
+            event.Skip()
+
+    def do_new(self, evt=None):
+        for element in self.elements:
+            element.remove()
+        self.elements = []
+        # draw paper size guides
+        for k, (w, h) in [('legal', (216, 356)), ('A4', (210, 297)), ('letter', (216, 279))]:
+            self.create_elements(
+                k, 'R', 0, 0, w, h,
+                size=70, foreground=0x808080, priority=-100,
+                canvas=self.canvas, frame=self, static=True)
+        self.diagram.ShowAll( 1 )
+
+    def do_open(self, evt):
+        dlg = wx.FileDialog(
+            self, message="Choose a file",
+            defaultDir=os.getcwd(),
+            defaultFile="invoice.csv",
+            wildcard="CSV Files (*.csv)|*.csv",
+            style=wx.OPEN
+            )
+
+        if dlg.ShowModal() == wx.ID_OK:
+            # This returns a Python list of files that were selected.
+            self.filename = dlg.GetPaths()[0]
+
+        dlg.Destroy()
+        self.SetTitle(self.filename + " - " + self.title)
+
+        self.do_new()
+        tmp = []
+        f = open(self.filename)
+        try:
+            filedata = f.readlines()
+        finally:
+            f.close()
+        for lno, linea in enumerate(filedata):
+            if DEBUG: print "processing line", lno, linea
+            args = []
+            for i,v in enumerate(linea.split(";")):
+                if not v.startswith("'"):
+                    v = v.replace(",",".")
+                else:
+                    v = v#.decode('latin1')
+                if v.strip()=='':
+                    v = None
+                else:
+                    v = eval(v.strip())
+                args.append(v)
+            tmp.append(args)
+
+        # sort by z-order (priority)
+        for args in sorted(tmp, key=lambda t: t[-1]):
+            if DEBUG: print args
+            self.create_elements(*args)
+        self.diagram.ShowAll( 1 )                       #
+
+        return True
+
+    def do_save(self, evt, filename=None):
+        try:
+            from time import gmtime, strftime
+            ts = strftime("%Y%m%d%H%M%S", gmtime())
+            os.rename(self.filename, self.filename + ts + ".bak")
+        except Exception, e:
+            if DEBUG: print e
+            pass
+
+        def csv_repr(v, decimal_sep="."):
+            if isinstance(v, float):
+                return ("%0.2f" % v).replace(".", decimal_sep)
+            else:
+                return repr(v)
+
+        f = open(self.filename, "w")
+        try:
+            for element in sorted(self.elements, key=lambda e:e.name):
+                if element.static:
+                    continue
+                d = element.as_dict()
+                l = [d['name'], d['type'],
+                     d['x1'], d['y1'], d['x2'], d['y2'],
+                     d['font'], d['size'],
+                     d['bold'], d['italic'], d['underline'],
+                     d['foreground'], d['background'],
+                     d['align'], d['text'], d['priority'],
+                    ]
+                f.write(";".join([csv_repr(v) for v in l]))
+                f.write("\n")
+        finally:
+            f.close()
+
+    def do_print(self, evt):
+        # genero el renderizador con propiedades del PDF
+        from template import Template
+        t = Template(elements=[e.as_dict() for e in self.elements if not e.static])
+        t.add_page()
+        if not t['logo'] or not os.path.exists(t['logo']):
+            # put a default logo so it doesn't trow an exception
+            logo = os.path.join(os.path.dirname(__file__), 'tutorial','logo.png')
+            t.set('logo', logo)
+        try:
+            t.render(self.filename +".pdf")
+        except:
+            if DEBUG and False:
+                import pdb;
+                pdb.pm()
+            else:
+                raise
+        if sys.platform=="linux2":
+            os.system("evince ""%s""" % self.filename +".pdf")
+        else:
+            os.startfile(self.filename +".pdf")
+
+    def do_find(self, evt):
+        # busco nombre o texto
+        dlg = wx.TextEntryDialog(
+            self, 'Enter text to search for',
+            'Find Text', '')
+        if dlg.ShowModal() == wx.ID_OK:
+            txt = dlg.GetValue().encode("latin1").lower()
+            for element in self.elements:
+                if txt in element:
+                    element.selected = True
+                    print "Found:", element.name
+            self.canvas.Refresh(False)
+        dlg.Destroy()
+
+    def do_cut(self, evt=None):
+        "Delete selected elements"
+        new_elements = []
+        for element in self.elements:
+            if element.selected:
+                print "Erasing:", element.name
+                element.selected = False
+                self.canvas.Refresh(False)
+                element.remove()
+            else:
+                new_elements.append(element)
+        self.elements = new_elements
+        self.canvas.Refresh(False)
+        self.diagram.ShowAll( 1 )
+
+    def do_copy(self, evt):
+        "Duplicate selected elements"
+        fields = ['qty', 'dx', 'dy']
+        data = {'qty': 1, 'dx': 0.0, 'dy': 5.0}
+        data = CustomDialog.do_input(self, 'Copy elements', fields, data)
+        if data:
+            new_elements = []
+            for i in range(1, data['qty']+1):
+                for element in self.elements:
+                    if element.selected:
+                        print "Copying:", element.name
+                        new_element = element.copy()
+                        name = new_element.name
+                        if len(name)>2 and name[-2:].isdigit():
+                            new_element.name = name[:-2] + "%02d" % (int(name[-2:])+i)
+                        else:
+                            new_element.name = new_element.name + "_copy"
+                        new_element.selected = False
+                        new_element.move(data['dx']*i, data['dy']*i)
+                        new_elements.append(new_element)
+            self.elements.extend(new_elements)
+            self.canvas.Refresh(False)
+            self.diagram.ShowAll( 1 )
+
+    def do_paste(self, evt):
+        "Insert new elements"
+        element = Element.new(self)
+        if element:
+            self.canvas.Refresh(False)
+            self.elements.append(element)
+            self.diagram.ShowAll( 1 )
+
+    def create_elements(self, name, type, x1, y1, x2, y2,
+                   font="Arial", size=12,
+                   bold=False, italic=False, underline=False,
+                   foreground= 0x000000, background=0xFFFFFF,
+                   align="L", text="", priority=0, canvas=None, frame=None, static=False,
+                   **kwargs):
+        element = Element(name=name, type=type, x1=x1, y1=y1, x2=x2, y2=y2,
+                   font=font, size=size,
+                   bold=bold, italic=italic, underline=underline,
+                   foreground= foreground, background=background,
+                   align=align, text=text, priority=priority,
+                   canvas=canvas or self.canvas, frame=frame or self,
+                   static=static)
+        self.elements.append(element)
+
+    def move_elements(self, x, y):
+        for element in self.elements:
+            if element.selected:
+                print "moving", element.name, x, y
+                element.x = element.x + x
+                element.y = element.y + y
+
+    def do_about(self, evt):
+        info = wx.AboutDialogInfo()
+        info.Name = self.title
+        info.Version = __version__
+        info.Copyright = __copyright__
+        info.Description = (
+            "Visual Template designer for PyFPDF (using wxPython OGL library)\n"
+            "Input files are CSV format describing the layout, separated by ;\n"
+            "Use toolbar buttons to open, save, print (preview) your template, "
+            "and there are buttons to find, add, remove or duplicate elements.\n"
+            "Over an element, a double left click opens edit text dialog, "
+            "and a right click opens edit properties dialog. \n"
+            "Multiple element can be selected with shift left click. \n"
+            "Use arrow keys or drag-and-drop to move elements.\n"
+            "For further information see project webpage:"
+            )
+        info.WebSite = ("http://code.google.com/p/pyfpdf/wiki/Templates",
+                        "pyfpdf Google Code Project")
+        info.Developers = [ __author__, ]
+
+        info.License = wordwrap(__license__, 500, wx.ClientDC(self))
+
+        # Then we call wx.AboutBox giving it that info object
+        wx.AboutBox(info)
+
+    def except_hook(self, type, value, trace):
+        import traceback
+        exc = traceback.format_exception(type, value, trace)
+        for e in exc: wx.LogError(e)
+        wx.LogError('Unhandled Error: %s: %s'%(str(type), str(value)))
+
+
+app = wx.PySimpleApp()
+ogl.OGLInitialize()
+frame = AppFrame()
+app.MainLoop()
+app.Destroy()
+
+

ADDED   gluon/contrib/pyfpdf/fpdf.py
Index: gluon/contrib/pyfpdf/fpdf.py
==================================================================
--- /dev/null
+++ gluon/contrib/pyfpdf/fpdf.py
@@ -0,0 +1,1686 @@
+#!/usr/bin/env python
+# -*- coding: latin-1 -*-
+# ******************************************************************************
+# * Software: FPDF for python                                                  *
+# * Version:  1.54c                                                            *
+# * Date:     2010-09-10                                                       *
+# * License:  LGPL v3.0                                                        *
+# *                                                                            *
+# * Original Author (PHP):  Olivier PLATHEY 2004-12-31                         *
+# * Ported to Python 2.4 by Max (maxpat78@yahoo.it) on 2006-05                 *
+# * Maintainer:  Mariano Reingart (reingart@gmail.com) et al since 2008 (est.) *
+# * NOTE: 'I' and 'D' destinations are disabled, and simply print to STDOUT    *
+# *****************************************************************************/
+
+from datetime import datetime
+import math
+import os, sys, zlib, struct
+
+try:
+    # Check if PIL is available, necessary for JPEG support.
+    import Image
+except ImportError:
+    Image = None
+
+def substr(s, start, length=-1):
+       if length < 0:
+               length=len(s)-start
+       return s[start:start+length]
+
+def sprintf(fmt, *args): return fmt % args
+
+# Global variables
+FPDF_VERSION='1.54b'
+FPDF_FONT_DIR=os.path.join(os.path.dirname(__file__),'font')
+fpdf_charwidths = {}
+
+class FPDF:
+#Private properties
+#~ page;               #current page number
+#~ n;                  #current object number
+#~ offsets;            #array of object offsets
+#~ buffer;             #buffer holding in-memory PDF
+#~ pages;              #array containing pages
+#~ state;              #current document state
+#~ compress;           #compression flag
+#~ def_orientation;     #default orientation
+#~ cur_orientation;     #current orientation
+#~ orientation_changes; #array indicating orientation changes
+#~ k;                  #scale factor (number of points in user unit)
+#~ fw_pt,fh_pt;         #dimensions of page format in points
+#~ fw,fh;             #dimensions of page format in user unit
+#~ w_pt,h_pt;           #current dimensions of page in points
+#~ w,h;               #current dimensions of page in user unit
+#~ l_margin;            #left margin
+#~ t_margin;            #top margin
+#~ r_margin;            #right margin
+#~ b_margin;            #page break margin
+#~ c_margin;            #cell margin
+#~ x,y;               #current position in user unit for cell positioning
+#~ lasth;              #height of last cell printed
+#~ line_width;          #line width in user unit
+#~ core_fonts;          #array of standard font names
+#~ fonts;              #array of used fonts
+#~ font_files;          #array of font files
+#~ diffs;              #array of encoding differences
+#~ images;             #array of used images
+#~ page_links;          #array of links in pages
+#~ links;              #array of internal links
+#~ font_family;         #current font family
+#~ font_style;          #current font style
+#~ underline;          #underlining flag
+#~ current_font;        #current font info
+#~ font_size_pt;         #current font size in points
+#~ font_size;           #current font size in user unit
+#~ draw_color;          #commands for drawing color
+#~ fill_color;          #commands for filling color
+#~ text_color;          #commands for text color
+#~ color_flag;          #indicates whether fill and text colors are different
+#~ ws;                 #word spacing
+#~ auto_page_break;      #automatic page breaking
+#~ page_break_trigger;   #threshold used to trigger page breaks
+#~ in_footer;           #flag set when processing footer
+#~ zoom_mode;           #zoom display mode
+#~ layout_mode;         #layout display mode
+#~ title;              #title
+#~ subject;            #subject
+#~ author;             #author
+#~ keywords;           #keywords
+#~ creator;            #creator
+#~ alias_nb_pages;       #alias for total number of pages
+#~ pdf_version;         #PDF version number
+
+# ******************************************************************************
+# *                                                                              *
+# *                               Public methods                                 *
+# *                                                                              *
+# *******************************************************************************/
+    def __init__(self, orientation='P',unit='mm',format='A4'):
+        #Some checks
+        self._dochecks()
+        #Initialization of properties
+        self.offsets={}
+        self.page=0
+        self.n=2
+        self.buffer=''
+        self.pages={}
+        self.orientation_changes={}
+        self.state=0
+        self.fonts={}
+        self.font_files={}
+        self.diffs={}
+        self.images={}
+        self.page_links={}
+        self.links={}
+        self.in_footer=0
+        self.lastw=0
+        self.lasth=0
+        self.font_family=''
+        self.font_style=''
+        self.font_size_pt=12
+        self.underline=0
+        self.draw_color='0 G'
+        self.fill_color='0 g'
+        self.text_color='0 g'
+        self.color_flag=0
+        self.ws=0
+        self.angle=0
+        #Standard fonts
+        self.core_fonts={'courier':'Courier','courierB':'Courier-Bold','courierI':'Courier-Oblique','courierBI':'Courier-BoldOblique',
+            'helvetica':'Helvetica','helveticaB':'Helvetica-Bold','helveticaI':'Helvetica-Oblique','helveticaBI':'Helvetica-BoldOblique',
+            'times':'Times-Roman','timesB':'Times-Bold','timesI':'Times-Italic','timesBI':'Times-BoldItalic',
+            'symbol':'Symbol','zapfdingbats':'ZapfDingbats'}
+        #Scale factor
+        if(unit=='pt'):
+            self.k=1
+        elif(unit=='mm'):
+            self.k=72/25.4
+        elif(unit=='cm'):
+            self.k=72/2.54
+        elif(unit=='in'):
+            self.k=72
+        else:
+            self.error('Incorrect unit: '+unit)
+        #Page format
+        if(isinstance(format,basestring)):
+            format=format.lower()
+            if(format=='a3'):
+                format=(841.89,1190.55)
+            elif(format=='a4'):
+                format=(595.28,841.89)
+            elif(format=='a5'):
+                format=(420.94,595.28)
+            elif(format=='letter'):
+                format=(612,792)
+            elif(format=='legal'):
+                format=(612,1008)
+            else:
+                self.error('Unknown page format: '+format)
+            self.fw_pt=format[0]
+            self.fh_pt=format[1]
+        else:
+            self.fw_pt=format[0]*self.k
+            self.fh_pt=format[1]*self.k
+        self.fw=self.fw_pt/self.k
+        self.fh=self.fh_pt/self.k
+        #Page orientation
+        orientation=orientation.lower()
+        if(orientation=='p' or orientation=='portrait'):
+            self.def_orientation='P'
+            self.w_pt=self.fw_pt
+            self.h_pt=self.fh_pt
+        elif(orientation=='l' or orientation=='landscape'):
+            self.def_orientation='L'
+            self.w_pt=self.fh_pt
+            self.h_pt=self.fw_pt
+        else:
+            self.error('Incorrect orientation: '+orientation)
+        self.cur_orientation=self.def_orientation
+        self.w=self.w_pt/self.k
+        self.h=self.h_pt/self.k
+        #Page margins (1 cm)
+        margin=28.35/self.k
+        self.set_margins(margin,margin)
+        #Interior cell margin (1 mm)
+        self.c_margin=margin/10.0
+        #line width (0.2 mm)
+        self.line_width=.567/self.k
+        #Automatic page break
+        self.set_auto_page_break(1,2*margin)
+        #Full width display mode
+        self.set_display_mode('fullwidth')
+        #Enable compression
+        self.set_compression(1)
+        #Set default PDF version number
+        self.pdf_version='1.3'
+
+    def set_margins(self, left,top,right=-1):
+        "Set left, top and right margins"
+        self.l_margin=left
+        self.t_margin=top
+        if(right==-1):
+            right=left
+        self.r_margin=right
+
+    def set_left_margin(self, margin):
+        "Set left margin"
+        self.l_margin=margin
+        if(self.page>0 and self.x<margin):
+            self.x=margin
+
+    def set_top_margin(self, margin):
+        "Set top margin"
+        self.t_margin=margin
+
+    def set_right_margin(self, margin):
+        "Set right margin"
+        self.r_margin=margin
+
+    def set_auto_page_break(self, auto,margin=0):
+        "Set auto page break mode and triggering margin"
+        self.auto_page_break=auto
+        self.b_margin=margin
+        self.page_break_trigger=self.h-margin
+
+    def set_display_mode(self, zoom,layout='continuous'):
+        "Set display mode in viewer"
+        if(zoom=='fullpage' or zoom=='fullwidth' or zoom=='real' or zoom=='default' or not isinstance(zoom,basestring)):
+            self.zoom_mode=zoom
+        else:
+            self.error('Incorrect zoom display mode: '+zoom)
+        if(layout=='single' or layout=='continuous' or layout=='two' or layout=='default'):
+            self.layout_mode=layout
+        else:
+            self.error('Incorrect layout display mode: '+layout)
+
+    def set_compression(self, compress):
+        "Set page compression"
+        self.compress=compress
+
+    def set_title(self, title):
+        "Title of document"
+        self.title=title
+
+    def set_subject(self, subject):
+        "Subject of document"
+        self.subject=subject
+
+    def set_author(self, author):
+        "Author of document"
+        self.author=author
+
+    def set_keywords(self, keywords):
+        "Keywords of document"
+        self.keywords=keywords
+
+    def set_creator(self, creator):
+        "Creator of document"
+        self.creator=creator
+
+    def alias_nb_pages(self, alias='{nb}'):
+        "Define an alias for total number of pages"
+        self.str_alias_nb_pages=alias
+        return alias
+
+    def error(self, msg):
+        "Fatal error"
+        raise RuntimeError('FPDF error: '+msg)
+
+    def open(self):
+        "Begin document"
+        self.state=1
+
+    def close(self):
+        "Terminate document"
+        if(self.state==3):
+            return
+        if(self.page==0):
+            self.add_page()
+        #Page footer
+        self.in_footer=1
+        self.footer()
+        self.in_footer=0
+        #close page
+        self._endpage()
+        #close document
+        self._enddoc()
+
+    def add_page(self, orientation=''):
+        "Start a new page"
+        if(self.state==0):
+            self.open()
+        family=self.font_family
+        if self.underline:
+            style = self.font_style + 'U'
+        else:
+            style = self.font_style
+        size=self.font_size_pt
+        lw=self.line_width
+        dc=self.draw_color
+        fc=self.fill_color
+        tc=self.text_color
+        cf=self.color_flag
+        if(self.page>0):
+            #Page footer
+            self.in_footer=1
+            self.footer()
+            self.in_footer=0
+            #close page
+            self._endpage()
+        #Start new page
+        self._beginpage(orientation)
+        #Set line cap style to square
+        self._out('2 J')
+        #Set line width
+        self.line_width=lw
+        self._out(sprintf('%.2f w',lw*self.k))
+        #Set font
+        if(family):
+            self.set_font(family,style,size)
+        #Set colors
+        self.draw_color=dc
+        if(dc!='0 G'):
+            self._out(dc)
+        self.fill_color=fc
+        if(fc!='0 g'):
+            self._out(fc)
+        self.text_color=tc
+        self.color_flag=cf
+        #Page header
+        self.header()
+        #Restore line width
+        if(self.line_width!=lw):
+            self.line_width=lw
+            self._out(sprintf('%.2f w',lw*self.k))
+        #Restore font
+        if(family):
+            self.set_font(family,style,size)
+        #Restore colors
+        if(self.draw_color!=dc):
+            self.draw_color=dc
+            self._out(dc)
+        if(self.fill_color!=fc):
+            self.fill_color=fc
+            self._out(fc)
+        self.text_color=tc
+        self.color_flag=cf
+
+    def header(self):
+        "Header to be implemented in your own inherited class"
+        pass
+
+    def footer(self):
+        "Footer to be implemented in your own inherited class"
+        pass
+
+    def page_no(self):
+        "Get current page number"
+        return self.page
+
+    def set_draw_color(self, r,g=-1,b=-1):
+        "Set color for all stroking operations"
+        if((r==0 and g==0 and b==0) or g==-1):
+            self.draw_color=sprintf('%.3f G',r/255.0)
+        else:
+            self.draw_color=sprintf('%.3f %.3f %.3f RG',r/255.0,g/255.0,b/255.0)
+        if(self.page>0):
+            self._out(self.draw_color)
+
+    def set_fill_color(self,r,g=-1,b=-1):
+        "Set color for all filling operations"
+        if((r==0 and g==0 and b==0) or g==-1):
+            self.fill_color=sprintf('%.3f g',r/255.0)
+        else:
+            self.fill_color=sprintf('%.3f %.3f %.3f rg',r/255.0,g/255.0,b/255.0)
+        self.color_flag=(self.fill_color!=self.text_color)
+        if(self.page>0):
+            self._out(self.fill_color)
+
+    def set_text_color(self, r,g=-1,b=-1):
+        "Set color for text"
+        if((r==0 and g==0 and b==0) or g==-1):
+            self.text_color=sprintf('%.3f g',r/255.0)
+        else:
+            self.text_color=sprintf('%.3f %.3f %.3f rg',r/255.0,g/255.0,b/255.0)
+        self.color_flag=(self.fill_color!=self.text_color)
+
+    def get_string_width(self, s):
+        "Get width of a string in the current font"
+        cw=self.current_font['cw']
+        w=0
+        l=len(s)
+        for i in xrange(0, l):
+            w += cw.get(s[i],0)
+        return w*self.font_size/1000.0
+
+    def set_line_width(self, width):
+        "Set line width"
+        self.line_width=width
+        if(self.page>0):
+            self._out(sprintf('%.2f w',width*self.k))
+
+    def line(self, x1,y1,x2,y2):
+        "Draw a line"
+        self._out(sprintf('%.2f %.2f m %.2f %.2f l S',x1*self.k,(self.h-y1)*self.k,x2*self.k,(self.h-y2)*self.k))
+
+    def rect(self, x,y,w,h,style=''):
+        "Draw a rectangle"
+        if(style=='F'):
+            op='f'
+        elif(style=='FD' or style=='DF'):
+            op='B'
+        else:
+            op='S'
+        self._out(sprintf('%.2f %.2f %.2f %.2f re %s',x*self.k,(self.h-y)*self.k,w*self.k,-h*self.k,op))
+
+    def add_font(self, family,style='',fname=''):
+        "Add a TrueType or Type1 font"
+        family=family.lower()
+        if(fname==''):
+            fname=family.replace(' ','')+style.lower()+'.font'
+        fname=os.path.join(FPDF_FONT_DIR,fname)
+        if(family=='arial'):
+            family='helvetica'
+        style=style.upper()
+        if(style=='IB'):
+            style='BI'
+        fontkey=family+style
+        if fontkey in self.fonts:
+            self.error('Font already added: '+family+' '+style)
+        execfile(fname, globals(), globals())
+        if 'name' not in globals():
+            self.error('Could not include font definition file')
+        i=len(self.fonts)+1
+        self.fonts[fontkey]={'i':i,'type':type,'name':name,'desc':desc,'up':up,'ut':ut,'cw':cw,'enc':enc,'file':filename}
+        if(diff):
+            #Search existing encodings
+            d=0
+            nb=len(self.diffs)
+            for i in xrange(1,nb+1):
+                if(self.diffs[i]==diff):
+                    d=i
+                    break
+            if(d==0):
+                d=nb+1
+                self.diffs[d]=diff
+            self.fonts[fontkey]['diff']=d
+        if(filename):
+            if(type=='TrueType'):
+                self.font_files[filename]={'length1':originalsize}
+            else:
+                self.font_files[filename]={'length1':size1,'length2':size2}
+
+    def set_font(self, family,style='',size=0):
+        "Select a font; size given in points"
+        family=family.lower()
+        if(family==''):
+            family=self.font_family
+        if(family=='arial'):
+            family='helvetica'
+        elif(family=='symbol' or family=='zapfdingbats'):
+            style=''
+        style=style.upper()
+        if('U' in style):
+            self.underline=1
+            style=style.replace('U','')
+        else:
+            self.underline=0
+        if(style=='IB'):
+            style='BI'
+        if(size==0):
+            size=self.font_size_pt
+        #Test if font is already selected
+        if(self.font_family==family and self.font_style==style and self.font_size_pt==size):
+            return
+        #Test if used for the first time
+        fontkey=family+style
+        if fontkey not in self.fonts:
+            #Check if one of the standard fonts
+            if fontkey in self.core_fonts:
+                if fontkey not in fpdf_charwidths:
+                    #Load metric file
+                    name=os.path.join(FPDF_FONT_DIR,family)
+                    if(family=='times' or family=='helvetica'):
+                        name+=style.lower()
+                    execfile(name+'.font')
+                    if fontkey not in fpdf_charwidths:
+                        self.error('Could not include font metric file for'+fontkey)
+                i=len(self.fonts)+1
+                self.fonts[fontkey]={'i':i,'type':'core','name':self.core_fonts[fontkey],'up':-100,'ut':50,'cw':fpdf_charwidths[fontkey]}
+            else:
+                self.error('Undefined font: '+family+' '+style)
+        #Select it
+        self.font_family=family
+        self.font_style=style
+        self.font_size_pt=size
+        self.font_size=size/self.k
+        self.current_font=self.fonts[fontkey]
+        if(self.page>0):
+            self._out(sprintf('BT /F%d %.2f Tf ET',self.current_font['i'],self.font_size_pt))
+
+    def set_font_size(self, size):
+        "Set font size in points"
+        if(self.font_size_pt==size):
+            return
+        self.font_size_pt=size
+        self.font_size=size/self.k
+        if(self.page>0):
+            self._out(sprintf('BT /F%d %.2f Tf ET',self.current_font['i'],self.font_size_pt))
+
+    def add_link(self):
+        "Create a new internal link"
+        n=len(self.links)+1
+        self.links[n]=(0,0)
+        return n
+
+    def set_link(self, link,y=0,page=-1):
+        "Set destination of internal link"
+        if(y==-1):
+            y=self.y
+        if(page==-1):
+            page=self.page
+        self.links[link]=[page,y]
+
+    def link(self, x,y,w,h,link):
+        "Put a link on the page"
+        if not self.page in self.page_links:
+            self.page_links[self.page] = []
+        self.page_links[self.page] += [(x*self.k,self.h_pt-y*self.k,w*self.k,h*self.k,link),]
+
+    def text(self, x,y,txt):
+        "Output a string"
+        s=sprintf('BT %.2f %.2f Td (%s) Tj ET',x*self.k,(self.h-y)*self.k,self._escape(txt))
+        if(self.underline and txt!=''):
+            s+=' '+self._dounderline(x,y,txt)
+        if(self.color_flag):
+            s='q '+self.text_color+' '+s+' Q'
+        self._out(s)
+
+    def rotate(self, angle, x=None, y=None):
+        if x is None:
+            x = self.x
+        if y is None:
+            y = self.y;
+        if self.angle!=0:
+            self._out('Q')
+        self.angle = angle
+        if angle!=0:
+            angle *= math.pi/180;
+            c = math.cos(angle);
+            s = math.sin(angle);
+            cx = x*self.k;
+            cy = (self.h-y)*self.k
+            s = sprintf('q %.5F %.5F %.5F %.5F %.2F %.2F cm 1 0 0 1 %.2F %.2F cm',c,s,-s,c,cx,cy,-cx,-cy)
+            self._out(s)
+
+    def accept_page_break(self):
+        "Accept automatic page break or not"
+        return self.auto_page_break
+
+    def cell(self, w,h=0,txt='',border=0,ln=0,align='',fill=0,link=''):
+        "Output a cell"
+        k=self.k
+        if(self.y+h>self.page_break_trigger and not self.in_footer and self.accept_page_break()):
+            #Automatic page break
+            x=self.x
+            ws=self.ws
+            if(ws>0):
+                self.ws=0
+                self._out('0 Tw')
+            self.add_page(self.cur_orientation)
+            self.x=x
+            if(ws>0):
+                self.ws=ws
+                self._out(sprintf('%.3f Tw',ws*k))
+        if(w==0):
+            w=self.w-self.r_margin-self.x
+        s=''
+        if(fill==1 or border==1):
+            if(fill==1):
+                if border==1:
+                    op='B'
+                else:
+                    op='f'
+            else:
+                op='S'
+            s=sprintf('%.2f %.2f %.2f %.2f re %s ',self.x*k,(self.h-self.y)*k,w*k,-h*k,op)
+        if(isinstance(border,basestring)):
+            x=self.x
+            y=self.y
+            if('L' in border):
+                s+=sprintf('%.2f %.2f m %.2f %.2f l S ',x*k,(self.h-y)*k,x*k,(self.h-(y+h))*k)
+            if('T' in border):
+                s+=sprintf('%.2f %.2f m %.2f %.2f l S ',x*k,(self.h-y)*k,(x+w)*k,(self.h-y)*k)
+            if('R' in border):
+                s+=sprintf('%.2f %.2f m %.2f %.2f l S ',(x+w)*k,(self.h-y)*k,(x+w)*k,(self.h-(y+h))*k)
+            if('B' in border):
+                s+=sprintf('%.2f %.2f m %.2f %.2f l S ',x*k,(self.h-(y+h))*k,(x+w)*k,(self.h-(y+h))*k)
+        if(txt!=''):
+            if(align=='R'):
+                dx=w-self.c_margin-self.get_string_width(txt)
+            elif(align=='C'):
+                dx=(w-self.get_string_width(txt))/2.0
+            else:
+                dx=self.c_margin
+            if(self.color_flag):
+                s+='q '+self.text_color+' '
+            txt2=txt.replace('\\','\\\\').replace(')','\\)').replace('(','\\(')
+            s+=sprintf('BT %.2f %.2f Td (%s) Tj ET',(self.x+dx)*k,(self.h-(self.y+.5*h+.3*self.font_size))*k,txt2)
+            if(self.underline):
+                s+=' '+self._dounderline(self.x+dx,self.y+.5*h+.3*self.font_size,txt)
+            if(self.color_flag):
+                s+=' Q'
+            if(link):
+                self.link(self.x+dx,self.y+.5*h-.5*self.font_size,self.get_string_width(txt),self.font_size,link)
+        if(s):
+            self._out(s)
+        self.lasth=h
+        if(ln>0):
+            #Go to next line
+            self.y+=h
+            if(ln==1):
+                self.x=self.l_margin
+        else:
+            self.x+=w
+
+    def multi_cell(self, w,h,txt,border=0,align='J',fill=0, split_only=False):
+        "Output text with automatic or explicit line breaks"
+        ret = [] # if split_only = True, returns splited text cells
+        cw=self.current_font['cw']
+        if(w==0):
+            w=self.w-self.r_margin-self.x
+        wmax=(w-2*self.c_margin)*1000.0/self.font_size
+        s=txt.replace("\r",'')
+        nb=len(s)
+        if(nb>0 and s[nb-1]=="\n"):
+            nb-=1
+        b=0
+        if(border):
+            if(border==1):
+                border='LTRB'
+                b='LRT'
+                b2='LR'
+            else:
+                b2=''
+                if('L' in border):
+                    b2+='L'
+                if('R' in border):
+                    b2+='R'
+                if ('T' in border):
+                    b=b2+'T'
+                else:
+                    b=b2
+        sep=-1
+        i=0
+        j=0
+        l=0
+        ns=0
+        nl=1
+        while(i<nb):
+            #Get next character
+            c=s[i]
+            if(c=="\n"):
+                #Explicit line break
+                if(self.ws>0):
+                    self.ws=0
+                    self._out('0 Tw')
+                if not split_only:
+                    self.cell(w,h,substr(s,j,i-j),b,2,align,fill)
+                else:
+                    ret.append(substr(s,j,i-j))
+                i+=1
+                sep=-1
+                j=i
+                l=0
+                ns=0
+                nl+=1
+                if(border and nl==2):
+                    b=b2
+                continue
+            if(c==' '):
+                sep=i
+                ls=l
+                ns+=1
+            l+=cw.get(c,0)
+            if(l>wmax):
+                #Automatic line break
+                if(sep==-1):
+                    if(i==j):
+                        i+=1
+                    if(self.ws>0):
+                        self.ws=0
+                        self._out('0 Tw')
+                    if not split_only:
+                        self.cell(w,h,substr(s,j,i-j),b,2,align,fill)
+                    else:
+                        ret.append(substr(s,j,i-j))
+                else:
+                    if(align=='J'):
+                        if ns>1:
+                            self.ws=(wmax-ls)/1000.0*self.font_size/(ns-1)
+                        else:
+                            self.ws=0
+                        self._out(sprintf('%.3f Tw',self.ws*self.k))
+                    if not split_only:
+                        self.cell(w,h,substr(s,j,sep-j),b,2,align,fill)
+                    else:
+                        ret.append(substr(s,j,sep-j))
+                    i=sep+1
+                sep=-1
+                j=i
+                l=0
+                ns=0
+                nl+=1
+                if(border and nl==2):
+                    b=b2
+            else:
+                i+=1
+        #Last chunk
+        if(self.ws>0):
+            self.ws=0
+            self._out('0 Tw')
+        if(border and 'B' in border):
+            b+='B'
+        if not split_only:
+            self.cell(w,h,substr(s,j,i-j),b,2,align,fill)
+        else:
+            ret.append(substr(s,j,i-j))
+        self.x=self.l_margin
+        return ret
+
+    def write(self, h,txt,link=''):
+        "Output text in flowing mode"
+        cw=self.current_font['cw']
+        w=self.w-self.r_margin-self.x
+        wmax=(w-2*self.c_margin)*1000.0/self.font_size
+        s=txt.replace("\r",'')
+        nb=len(s)
+        sep=-1
+        i=0
+        j=0
+        l=0
+        nl=1
+        while(i<nb):
+            #Get next character
+            c=s[i]
+            if(c=="\n"):
+                #Explicit line break
+                self.cell(w,h,substr(s,j,i-j),0,2,'',0,link)
+                i+=1
+                sep=-1
+                j=i
+                l=0
+                if(nl==1):
+                    self.x=self.l_margin
+                    w=self.w-self.r_margin-self.x
+                    wmax=(w-2*self.c_margin)*1000.0/self.font_size
+                nl+=1
+                continue
+            if(c==' '):
+                sep=i
+            l+=cw.get(c,0)
+            if(l>wmax):
+                #Automatic line break
+                if(sep==-1):
+                    if(self.x>self.l_margin):
+                        #Move to next line
+                        self.x=self.l_margin
+                        self.y+=h
+                        w=self.w-self.r_margin-self.x
+                        wmax=(w-2*self.c_margin)*1000.0/self.font_size
+                        i+=1
+                        nl+=1
+                        continue
+                    if(i==j):
+                        i+=1
+                    self.cell(w,h,substr(s,j,i-j),0,2,'',0,link)
+                else:
+                    self.cell(w,h,substr(s,j,sep-j),0,2,'',0,link)
+                    i=sep+1
+                sep=-1
+                j=i
+                l=0
+                if(nl==1):
+                    self.x=self.l_margin
+                    w=self.w-self.r_margin-self.x
+                    wmax=(w-2*self.c_margin)*1000.0/self.font_size
+                nl+=1
+            else:
+                i+=1
+        #Last chunk
+        if(i!=j):
+            self.cell(l/1000.0*self.font_size,h,substr(s,j),0,0,'',0,link)
+
+    def image(self, name,x,y,w=0,h=0,type='',link=''):
+        "Put an image on the page"
+        if not name in self.images:
+            #First use of image, get info
+            if(type==''):
+                pos=name.rfind('.')
+                if(not pos):
+                    self.error('image file has no extension and no type was specified: '+name)
+                type=substr(name,pos+1)
+            type=type.lower()
+            if(type=='jpg' or type=='jpeg'):
+                info=self._parsejpg(name)
+            elif(type=='png'):
+                info=self._parsepng(name)
+            else:
+                #Allow for additional formats
+                mtd='_parse'+type
+                if not hasattr(self,mtd):
+                    self.error('Unsupported image type: '+type)
+                info=self.mtd(name)
+            info['i']=len(self.images)+1
+            self.images[name]=info
+        else:
+            info=self.images[name]
+        #Automatic width and height calculation if needed
+        if(w==0 and h==0):
+            #Put image at 72 dpi
+            w=info['w']/self.k
+            h=info['h']/self.k
+        if(w==0):
+            w=h*info['w']/info['h']
+        if(h==0):
+            h=w*info['h']/info['w']
+        self._out(sprintf('q %.2f 0 0 %.2f %.2f %.2f cm /I%d Do Q',w*self.k,h*self.k,x*self.k,(self.h-(y+h))*self.k,info['i']))
+        if(link):
+            self.link(x,y,w,h,link)
+
+    def ln(self, h=''):
+        "Line Feed; default value is last cell height"
+        self.x=self.l_margin
+        if(isinstance(h, basestring)):
+            self.y+=self.lasth
+        else:
+            self.y+=h
+
+    def get_x(self):
+        "Get x position"
+        return self.x
+
+    def set_x(self, x):
+        "Set x position"
+        if(x>=0):
+            self.x=x
+        else:
+            self.x=self.w+x
+
+    def get_y(self):
+        "Get y position"
+        return self.y
+
+    def set_y(self, y):
+        "Set y position and reset x"
+        self.x=self.l_margin
+        if(y>=0):
+            self.y=y
+        else:
+            self.y=self.h+y
+
+    def set_xy(self, x,y):
+        "Set x and y positions"
+        self.set_y(y)
+        self.set_x(x)
+
+    def output(self, name='',dest=''):
+        "Output PDF to some destination"
+        #Finish document if necessary
+        if(self.state<3):
+            self.close()
+        #Normalize parameters
+ #       if(type(dest)==type(bool())):
+ #           if dest:
+ #               dest='D'
+ #           else:
+ #               dest='F'
+        dest=dest.upper()
+        if(dest==''):
+            if(name==''):
+                name='doc.pdf'
+                dest='I'
+            else:
+                dest='F'
+        if dest=='I':
+            print self.buffer
+        elif dest=='D':
+            print self.buffer
+        elif dest=='F':
+            #Save to local file
+            f=file(name,'wb')
+            if(not f):
+                self.error('Unable to create output file: '+name)
+            f.write(self.buffer)
+            f.close()
+        elif dest=='S':
+            #Return as a string
+            return self.buffer
+        else:
+            self.error('Incorrect output destination: '+dest)
+        return ''
+
+# ******************************************************************************
+# *                                                                              *
+# *                              Protected methods                               *
+# *                                                                              *
+# *******************************************************************************/
+    def _dochecks(self):
+        #Check for locale-related bug
+#        if(1.1==1):
+#            self.error("Don\'t alter the locale before including class file");
+        #Check for decimal separator
+        if(sprintf('%.1f',1.0)!='1.0'):
+            import locale
+            locale.setlocale(locale.LC_NUMERIC,'C')
+
+    def _getfontpath(self):
+        return FPDF_FONT_DIR+'/'
+
+    def _putpages(self):
+        nb=self.page
+        if hasattr(self,'str_alias_nb_pages'):
+            #Replace number of pages
+            for n in xrange(1,nb+1):
+                self.pages[n]=self.pages[n].replace(self.str_alias_nb_pages,str(nb))
+        if(self.def_orientation=='P'):
+            w_pt=self.fw_pt
+            h_pt=self.fh_pt
+        else:
+            w_pt=self.fh_pt
+            h_pt=self.fw_pt
+        if self.compress:
+            filter='/Filter /FlateDecode '
+        else:
+            filter=''
+        for n in xrange(1,nb+1):
+            #Page
+            self._newobj()
+            self._out('<</Type /Page')
+            self._out('/Parent 1 0 R')
+            if n in self.orientation_changes:
+                self._out(sprintf('/MediaBox [0 0 %.2f %.2f]',h_pt,w_pt))
+            self._out('/Resources 2 0 R')
+            if self.page_links and n in self.page_links:
+                #Links
+                annots='/Annots ['
+                for pl in self.page_links[n]:
+                    rect=sprintf('%.2f %.2f %.2f %.2f',pl[0],pl[1],pl[0]+pl[2],pl[1]-pl[3])
+                    annots+='<</Type /Annot /Subtype /Link /Rect ['+rect+'] /Border [0 0 0] '
+                    if(isinstance(pl[4],basestring)):
+                        annots+='/A <</S /URI /URI '+self._textstring(pl[4])+'>>>>'
+                    else:
+                        l=self.links[pl[4]]
+                        if l[0] in self.orientation_changes:
+                            h=w_pt
+                        else:
+                            h=h_pt
+                        annots+=sprintf('/Dest [%d 0 R /XYZ 0 %.2f null]>>',1+2*l[0],h-l[1]*self.k)
+                self._out(annots+']')
+            self._out('/Contents '+str(self.n+1)+' 0 R>>')
+            self._out('endobj')
+            #Page content
+            if self.compress:
+                p = zlib.compress(self.pages[n])
+            else:
+                p = self.pages[n]
+            self._newobj()
+            self._out('<<'+filter+'/Length '+str(len(p))+'>>')
+            self._putstream(p)
+            self._out('endobj')
+        #Pages root
+        self.offsets[1]=len(self.buffer)
+        self._out('1 0 obj')
+        self._out('<</Type /Pages')
+        kids='/Kids ['
+        for i in xrange(0,nb):
+            kids+=str(3+2*i)+' 0 R '
+        self._out(kids+']')
+        self._out('/Count '+str(nb))
+        self._out(sprintf('/MediaBox [0 0 %.2f %.2f]',w_pt,h_pt))
+        self._out('>>')
+        self._out('endobj')
+
+    def _putfonts(self):
+        nf=self.n
+        for diff in self.diffs:
+            #Encodings
+            self._newobj()
+            self._out('<</Type /Encoding /BaseEncoding /WinAnsiEncoding /Differences ['+self.diffs[diff]+']>>')
+            self._out('endobj')
+        for name,info in self.font_files.iteritems():
+            #Font file embedding
+            self._newobj()
+            self.font_files[name]['n']=self.n
+            font=''
+            f=file(self._getfontpath()+name,'rb',1)
+            if(not f):
+                self.error('Font file not found')
+            font=f.read()
+            f.close()
+            compressed=(substr(name,-2)=='.z')
+            if(not compressed and 'length2' in info):
+                header=(ord(font[0])==128)
+                if(header):
+                    #Strip first binary header
+                    font=substr(font,6)
+                if(header and ord(font[info['length1']])==128):
+                    #Strip second binary header
+                    font=substr(font,0,info['length1'])+substr(font,info['length1']+6)
+            self._out('<</Length '+str(len(font)))
+            if(compressed):
+                self._out('/Filter /FlateDecode')
+            self._out('/Length1 '+str(info['length1']))
+            if('length2' in info):
+                self._out('/Length2 '+str(info['length2'])+' /Length3 0')
+            self._out('>>')
+            self._putstream(font)
+            self._out('endobj')
+        for k,font in self.fonts.iteritems():
+            #Font objects
+            self.fonts[k]['n']=self.n+1
+            type=font['type']
+            name=font['name']
+            if(type=='core'):
+                #Standard font
+                self._newobj()
+                self._out('<</Type /Font')
+                self._out('/BaseFont /'+name)
+                self._out('/Subtype /Type1')
+                if(name!='Symbol' and name!='ZapfDingbats'):
+                    self._out('/Encoding /WinAnsiEncoding')
+                self._out('>>')
+                self._out('endobj')
+            elif(type=='Type1' or type=='TrueType'):
+                #Additional Type1 or TrueType font
+                self._newobj()
+                self._out('<</Type /Font')
+                self._out('/BaseFont /'+name)
+                self._out('/Subtype /'+type)
+                self._out('/FirstChar 32 /LastChar 255')
+                self._out('/Widths '+str(self.n+1)+' 0 R')
+                self._out('/FontDescriptor '+str(self.n+2)+' 0 R')
+                if(font['enc']):
+                    if('diff' in font):
+                        self._out('/Encoding '+str(nf+font['diff'])+' 0 R')
+                    else:
+                        self._out('/Encoding /WinAnsiEncoding')
+                self._out('>>')
+                self._out('endobj')
+                #Widths
+                self._newobj()
+                cw=font['cw']
+                s='['
+                for i in xrange(32,256):
+                    # Get doesn't rise exception; returns 0 instead of None if not set
+                    s+=str(cw.get(chr(i)) or 0)+' '
+                self._out(s+']')
+                self._out('endobj')
+                #Descriptor
+                self._newobj()
+                s='<</Type /FontDescriptor /FontName /'+name
+                for k,v in font['desc'].iteritems():
+                    s+=' /'+str(k)+' '+str(v)
+                filename=font['file']
+                if(filename):
+                    s+=' /FontFile'
+                    if type!='Type1':
+                        s+='2'
+                    s+=' '+str(self.font_files[filename]['n'])+' 0 R'
+                self._out(s+'>>')
+                self._out('endobj')
+            else:
+                #Allow for additional types
+                mtd='_put'+type.lower()
+                if(not method_exists(self,mtd)):
+                    self.error('Unsupported font type: '+type)
+                self.mtd(font)
+
+    def _putimages(self):
+        filter=''
+        if self.compress:
+            filter='/Filter /FlateDecode '
+        for filename,info in self.images.iteritems():
+            self._newobj()
+            self.images[filename]['n']=self.n
+            self._out('<</Type /XObject')
+            self._out('/Subtype /Image')
+            self._out('/Width '+str(info['w']))
+            self._out('/Height '+str(info['h']))
+            if(info['cs']=='Indexed'):
+                self._out('/ColorSpace [/Indexed /DeviceRGB '+str(len(info['pal'])/3-1)+' '+str(self.n+1)+' 0 R]')
+            else:
+                self._out('/ColorSpace /'+info['cs'])
+                if(info['cs']=='DeviceCMYK'):
+                    self._out('/Decode [1 0 1 0 1 0 1 0]')
+            self._out('/BitsPerComponent '+str(info['bpc']))
+            if 'f' in info:
+                self._out('/Filter /'+info['f'])
+            if 'parms' in info:
+                self._out(info['parms'])
+            if('trns' in info and type([])==info['trns']):
+                trns=''
+                for i in xrange(0,len(info['trns'])):
+                    trns+=str(info['trns'][i])+' '+str(info['trns'][i])+' '
+                self._out('/Mask ['+trns+']')
+            self._out('/Length '+str(len(info['data']))+'>>')
+            self._putstream(info['data'])
+            self.images[filename]['data'] = None
+            self._out('endobj')
+            #Palette
+            if(info['cs']=='Indexed'):
+                self._newobj()
+                if self.compress:
+                    pal=zlib.compress(info['pal'])
+                else:
+                    pal=info['pal']
+                self._out('<<'+filter+'/Length '+str(len(pal))+'>>')
+                self._putstream(pal)
+                self._out('endobj')
+
+    def _putxobjectdict(self):
+        for image in self.images.values():
+            self._out('/I'+str(image['i'])+' '+str(image['n'])+' 0 R')
+
+    def _putresourcedict(self):
+        self._out('/ProcSet [/PDF /Text /ImageB /ImageC /ImageI]')
+        self._out('/Font <<')
+        for font in self.fonts.values():
+            self._out('/F'+str(font['i'])+' '+str(font['n'])+' 0 R')
+        self._out('>>')
+        self._out('/XObject <<')
+        self._putxobjectdict()
+        self._out('>>')
+
+    def _putresources(self):
+        self._putfonts()
+        self._putimages()
+        #Resource dictionary
+        self.offsets[2]=len(self.buffer)
+        self._out('2 0 obj')
+        self._out('<<')
+        self._putresourcedict()
+        self._out('>>')
+        self._out('endobj')
+
+    def _putinfo(self):
+        self._out('/Producer '+self._textstring('PyFPDF '+FPDF_VERSION+' http://pyfpdf.googlecode.com/'))
+        if hasattr(self,'title'):
+            self._out('/Title '+self._textstring(self.title))
+        if hasattr(self,'subject'):
+            self._out('/Subject '+self._textstring(self.subject))
+        if hasattr(self,'author'):
+            self._out('/Author '+self._textstring(self.author))
+        if hasattr (self,'keywords'):
+            self._out('/Keywords '+self._textstring(self.keywords))
+        if hasattr(self,'creator'):
+            self._out('/Creator '+self._textstring(self.creator))
+        self._out('/CreationDate '+self._textstring('D:'+datetime.now().strftime('%Y%m%d%H%M%S')))
+
+    def _putcatalog(self):
+        self._out('/Type /Catalog')
+        self._out('/Pages 1 0 R')
+        if(self.zoom_mode=='fullpage'):
+            self._out('/OpenAction [3 0 R /Fit]')
+        elif(self.zoom_mode=='fullwidth'):
+            self._out('/OpenAction [3 0 R /FitH null]')
+        elif(self.zoom_mode=='real'):
+            self._out('/OpenAction [3 0 R /XYZ null null 1]')
+        elif(not isinstance(self.zoom_mode,basestring)):
+            self._out('/OpenAction [3 0 R /XYZ null null '+(self.zoom_mode/100)+']')
+        if(self.layout_mode=='single'):
+            self._out('/PageLayout /SinglePage')
+        elif(self.layout_mode=='continuous'):
+            self._out('/PageLayout /OneColumn')
+        elif(self.layout_mode=='two'):
+            self._out('/PageLayout /TwoColumnLeft')
+
+    def _putheader(self):
+        self._out('%PDF-'+self.pdf_version)
+
+    def _puttrailer(self):
+        self._out('/Size '+str(self.n+1))
+        self._out('/Root '+str(self.n)+' 0 R')
+        self._out('/Info '+str(self.n-1)+' 0 R')
+
+    def _enddoc(self):
+        self._putheader()
+        self._putpages()
+        self._putresources()
+        #Info
+        self._newobj()
+        self._out('<<')
+        self._putinfo()
+        self._out('>>')
+        self._out('endobj')
+        #Catalog
+        self._newobj()
+        self._out('<<')
+        self._putcatalog()
+        self._out('>>')
+        self._out('endobj')
+        #Cross-ref
+        o=len(self.buffer)
+        self._out('xref')
+        self._out('0 '+(str(self.n+1)))
+        self._out('0000000000 65535 f ')
+        for i in xrange(1,self.n+1):
+            self._out(sprintf('%010d 00000 n ',self.offsets[i]))
+        #Trailer
+        self._out('trailer')
+        self._out('<<')
+        self._puttrailer()
+        self._out('>>')
+        self._out('startxref')
+        self._out(o)
+        self._out('%%EOF')
+        self.state=3
+
+    def _beginpage(self, orientation):
+        self.page+=1
+        self.pages[self.page]=''
+        self.state=2
+        self.x=self.l_margin
+        self.y=self.t_margin
+        self.font_family=''
+        #Page orientation
+        if(not orientation):
+            orientation=self.def_orientation
+        else:
+            orientation=orientation[0].upper()
+            if(orientation!=self.def_orientation):
+                self.orientation_changes[self.page]=1
+        if(orientation!=self.cur_orientation):
+            #Change orientation
+            if(orientation=='P'):
+                self.w_pt=self.fw_pt
+                self.h_pt=self.fh_pt
+                self.w=self.fw
+                self.h=self.fh
+            else:
+                self.w_pt=self.fh_pt
+                self.h_pt=self.fw_pt
+                self.w=self.fh
+                self.h=self.fw
+            self.page_break_trigger=self.h-self.b_margin
+            self.cur_orientation=orientation
+
+    def _endpage(self):
+        #End of page contents
+        self.state=1
+
+    def _newobj(self):
+        #Begin a new object
+        self.n+=1
+        self.offsets[self.n]=len(self.buffer)
+        self._out(str(self.n)+' 0 obj')
+
+    def _dounderline(self, x,y,txt):
+        #Underline text
+        up=self.current_font['up']
+        ut=self.current_font['ut']
+        w=self.get_string_width(txt)+self.ws*txt.count(' ')
+        return sprintf('%.2f %.2f %.2f %.2f re f',x*self.k,(self.h-(y-up/1000.0*self.font_size))*self.k,w*self.k,-ut/1000.0*self.font_size_pt)
+
+    def _parsejpg(self, filename):
+        # Extract info from a JPEG file
+        if Image is None:
+            self.error('PIL not installed')
+        try:
+            f = open(filename, 'rb')
+            im = Image.open(f)
+        except Exception, e:
+            self.error('Missing or incorrect image file: %s. error: %s' % (filename, str(e)))
+        else:
+            a = im.size
+        # We shouldn't get into here, as Jpeg is RGB=8bpp right(?), but, just in case...
+        bpc=8
+        if im.mode == 'RGB':
+            colspace='DeviceRGB'
+        elif im.mode == 'CMYK':
+            colspace='DeviceCMYK'
+        else:
+            colspace='DeviceGray'
+
+        # Read whole file from the start
+        f.seek(0)
+        data = f.read()
+        f.close()
+        return {'w':a[0],'h':a[1],'cs':colspace,'bpc':bpc,'f':'DCTDecode','data':data}
+
+    def _parsepng(self, name):
+        #Extract info from a PNG file
+        if name.startswith("http://") or name.startswith("https://"):
+            import urllib
+            f = urllib.urlopen(name)
+        else:
+            f=open(name,'rb')
+        if(not f):
+            self.error("Can't open image file: "+name)
+        #Check signature
+        if(f.read(8)!='\x89'+'PNG'+'\r'+'\n'+'\x1a'+'\n'):
+            self.error('Not a PNG file: '+name)
+        #Read header chunk
+        f.read(4)
+        if(f.read(4)!='IHDR'):
+            self.error('Incorrect PNG file: '+name)
+        w=self._freadint(f)
+        h=self._freadint(f)
+        bpc=ord(f.read(1))
+        if(bpc>8):
+            self.error('16-bit depth not supported: '+name)
+        ct=ord(f.read(1))
+        if(ct==0):
+            colspace='DeviceGray'
+        elif(ct==2):
+            colspace='DeviceRGB'
+        elif(ct==3):
+            colspace='Indexed'
+        else:
+            self.error('Alpha channel not supported: '+name)
+        if(ord(f.read(1))!=0):
+            self.error('Unknown compression method: '+name)
+        if(ord(f.read(1))!=0):
+            self.error('Unknown filter method: '+name)
+        if(ord(f.read(1))!=0):
+            self.error('Interlacing not supported: '+name)
+        f.read(4)
+        parms='/DecodeParms <</Predictor 15 /Colors '
+        if ct==2:
+            parms+='3'
+        else:
+            parms+='1'
+        parms+=' /BitsPerComponent '+str(bpc)+' /Columns '+str(w)+'>>'
+        #Scan chunks looking for palette, transparency and image data
+        pal=''
+        trns=''
+        data=''
+        n=1
+        while n != None:
+            n=self._freadint(f)
+            type=f.read(4)
+            if(type=='PLTE'):
+                #Read palette
+                pal=f.read(n)
+                f.read(4)
+            elif(type=='tRNS'):
+                #Read transparency info
+                t=f.read(n)
+                if(ct==0):
+                    trns=[ord(substr(t,1,1)),]
+                elif(ct==2):
+                    trns=[ord(substr(t,1,1)),ord(substr(t,3,1)),ord(substr(t,5,1))]
+                else:
+                    pos=t.find('\x00')
+                    if(pos!=-1):
+                        trns=[pos,]
+                f.read(4)
+            elif(type=='IDAT'):
+                #Read image data block
+                data+=f.read(n)
+                f.read(4)
+            elif(type=='IEND'):
+                break
+            else:
+                f.read(n+4)
+        if(colspace=='Indexed' and not pal):
+            self.error('Missing palette in '+name)
+        f.close()
+        return {'w':w,'h':h,'cs':colspace,'bpc':bpc,'f':'FlateDecode','parms':parms,'pal':pal,'trns':trns,'data':data}
+
+    def _freadint(self, f):
+        #Read a 4-byte integer from file
+        try:
+            return struct.unpack('>HH',f.read(4))[1]
+        except:
+            return None
+
+    def _textstring(self, s):
+        #Format a text string
+        return '('+self._escape(s)+')'
+
+    def _escape(self, s):
+        #Add \ before \, ( and )
+        return s.replace('\\','\\\\').replace(')','\\)').replace('(','\\(')
+
+    def _putstream(self, s):
+        self._out('stream')
+        self._out(s)
+        self._out('endstream')
+
+    def _out(self, s):
+        #Add a line to the document
+        if(self.state==2):
+            self.pages[self.page]+=s+"\n"
+        else:
+            self.buffer+=str(s)+"\n"
+
+    def interleaved2of5(self, txt, x, y, w=1.0, h=10.0):
+        "Barcode I2of5 (numeric), adds a 0 if odd lenght"
+        narrow = w / 3.0
+        wide = w
+
+        # wide/narrow codes for the digits
+        bar_char={}
+        bar_char['0'] = 'nnwwn'
+        bar_char['1'] = 'wnnnw'
+        bar_char['2'] = 'nwnnw'
+        bar_char['3'] = 'wwnnn'
+        bar_char['4'] = 'nnwnw'
+        bar_char['5'] = 'wnwnn'
+        bar_char['6'] = 'nwwnn'
+        bar_char['7'] = 'nnnww'
+        bar_char['8'] = 'wnnwn'
+        bar_char['9'] = 'nwnwn'
+        bar_char['A'] = 'nn'
+        bar_char['Z'] = 'wn'
+
+        self.set_fill_color(0)
+        code = txt
+        # add leading zero if code-length is odd
+        if len(code) % 2 != 0:
+            code = '0' + code
+
+        # add start and stop codes
+        code = 'AA' + code.lower() + 'ZA'
+
+        for i in xrange(0, len(code), 2):
+            # choose next pair of digits
+            char_bar = code[i];
+            char_space = code[i+1];
+            # check whether it is a valid digit
+            if not char_bar in bar_char.keys():
+                raise RuntimeError ('Caractr "%s" invlido para el cdigo de barras I25: ' % char_bar)
+            if not char_space in bar_char.keys():
+                raise RuntimeError ('Caractr "%s" invlido para el cdigo de barras I25: ' % char_space)
+
+            # create a wide/narrow-sequence (first digit=bars, second digit=spaces)
+            seq = ''
+            for s in xrange(0, len(bar_char[char_bar])):
+                seq += bar_char[char_bar][s] + bar_char[char_space][s]
+
+            for bar in xrange(0, len(seq)):
+                # set line_width depending on value
+                if seq[bar] == 'n':
+                    line_width = narrow
+                else:
+                    line_width = wide
+
+                # draw every second value, because the second digit of the pair is represented by the spaces
+                if bar % 2 == 0:
+                    self.rect(x, y, line_width, h, 'F')
+
+                x += line_width
+
+
+    def code39(self, txt, x, y, w=1.5, h=5.0):
+        "Barcode 3of9"
+        wide = w
+        narrow = w /3.0
+        gap = narrow
+
+        bar_char={}
+        bar_char['0'] = 'nnnwwnwnn'
+        bar_char['1'] = 'wnnwnnnnw'
+        bar_char['2'] = 'nnwwnnnnw'
+        bar_char['3'] = 'wnwwnnnnn'
+        bar_char['4'] = 'nnnwwnnnw'
+        bar_char['5'] = 'wnnwwnnnn'
+        bar_char['6'] = 'nnwwwnnnn'
+        bar_char['7'] = 'nnnwnnwnw'
+        bar_char['8'] = 'wnnwnnwnn'
+        bar_char['9'] = 'nnwwnnwnn'
+        bar_char['A'] = 'wnnnnwnnw'
+        bar_char['B'] = 'nnwnnwnnw'
+        bar_char['C'] = 'wnwnnwnnn'
+        bar_char['D'] = 'nnnnwwnnw'
+        bar_char['E'] = 'wnnnwwnnn'
+        bar_char['F'] = 'nnwnwwnnn'
+        bar_char['G'] = 'nnnnnwwnw'
+        bar_char['H'] = 'wnnnnwwnn'
+        bar_char['I'] = 'nnwnnwwnn'
+        bar_char['J'] = 'nnnnwwwnn'
+        bar_char['K'] = 'wnnnnnnww'
+        bar_char['L'] = 'nnwnnnnww'
+        bar_char['M'] = 'wnwnnnnwn'
+        bar_char['N'] = 'nnnnwnnww'
+        bar_char['O'] = 'wnnnwnnwn'
+        bar_char['P'] = 'nnwnwnnwn'
+        bar_char['Q'] = 'nnnnnnwww'
+        bar_char['R'] = 'wnnnnnwwn'
+        bar_char['S'] = 'nnwnnnwwn'
+        bar_char['T'] = 'nnnnwnwwn'
+        bar_char['U'] = 'wwnnnnnnw'
+        bar_char['V'] = 'nwwnnnnnw'
+        bar_char['W'] = 'wwwnnnnnn'
+        bar_char['X'] = 'nwnnwnnnw'
+        bar_char['Y'] = 'wwnnwnnnn'
+        bar_char['Z'] = 'nwwnwnnnn'
+        bar_char['-'] = 'nwnnnnwnw'
+        bar_char['.'] = 'wwnnnnwnn'
+        bar_char[' '] = 'nwwnnnwnn'
+        bar_char['*'] = 'nwnnwnwnn'
+        bar_char['$'] = 'nwnwnwnnn'
+        bar_char['/'] = 'nwnwnnnwn'
+        bar_char['+'] = 'nwnnnwnwn'
+        bar_char['%'] = 'nnnwnwnwn'
+
+        self.set_fill_color(0)
+        code = txt
+
+        code = code.upper()
+        for i in xrange (0, len(code), 2):
+            char_bar = code[i];
+
+            if not char_bar in bar_char.keys():
+                raise RuntimeError ('Caracter "%s" invlido para el cdigo de barras' % char_bar)
+
+            seq= ''
+            for s in xrange(0, len(bar_char[char_bar])):
+                seq += bar_char[char_bar][s]
+
+            for bar in xrange(0, len(seq)):
+                if seq[bar] == 'n':
+                    line_width = narrow
+                else:
+                    line_width = wide
+
+                if bar % 2 == 0:
+                    self.rect(x,y,line_width,h,'F')
+                x += line_width
+        x += gap
+
+#End of class
+
+# Fonts:
+
+fpdf_charwidths['courier']={}
+
+for i in xrange(0,256):
+    fpdf_charwidths['courier'][chr(i)]=600
+    fpdf_charwidths['courierB']=fpdf_charwidths['courier']
+    fpdf_charwidths['courierI']=fpdf_charwidths['courier']
+    fpdf_charwidths['courierBI']=fpdf_charwidths['courier']
+
+fpdf_charwidths['helvetica']={
+    '\x00':278,'\x01':278,'\x02':278,'\x03':278,'\x04':278,'\x05':278,'\x06':278,'\x07':278,'\x08':278,'\t':278,'\n':278,'\x0b':278,'\x0c':278,'\r':278,'\x0e':278,'\x0f':278,'\x10':278,'\x11':278,'\x12':278,'\x13':278,'\x14':278,'\x15':278,
+    '\x16':278,'\x17':278,'\x18':278,'\x19':278,'\x1a':278,'\x1b':278,'\x1c':278,'\x1d':278,'\x1e':278,'\x1f':278,' ':278,'!':278,'"':355,'#':556,'$':556,'%':889,'&':667,'\'':191,'(':333,')':333,'*':389,'+':584,
+    ',':278,'-':333,'.':278,'/':278,'0':556,'1':556,'2':556,'3':556,'4':556,'5':556,'6':556,'7':556,'8':556,'9':556,':':278,';':278,'<':584,'=':584,'>':584,'?':556,'@':1015,'A':667,
+    'B':667,'C':722,'D':722,'E':667,'F':611,'G':778,'H':722,'I':278,'J':500,'K':667,'L':556,'M':833,'N':722,'O':778,'P':667,'Q':778,'R':722,'S':667,'T':611,'U':722,'V':667,'W':944,
+    'X':667,'Y':667,'Z':611,'[':278,'\\':278,']':278,'^':469,'_':556,'`':333,'a':556,'b':556,'c':500,'d':556,'e':556,'f':278,'g':556,'h':556,'i':222,'j':222,'k':500,'l':222,'m':833,
+    'n':556,'o':556,'p':556,'q':556,'r':333,'s':500,'t':278,'u':556,'v':500,'w':722,'x':500,'y':500,'z':500,'{':334,'|':260,'}':334,'~':584,'\x7f':350,'\x80':556,'\x81':350,'\x82':222,'\x83':556,
+    '\x84':333,'\x85':1000,'\x86':556,'\x87':556,'\x88':333,'\x89':1000,'\x8a':667,'\x8b':333,'\x8c':1000,'\x8d':350,'\x8e':611,'\x8f':350,'\x90':350,'\x91':222,'\x92':222,'\x93':333,'\x94':333,'\x95':350,'\x96':556,'\x97':1000,'\x98':333,'\x99':1000,
+    '\x9a':500,'\x9b':333,'\x9c':944,'\x9d':350,'\x9e':500,'\x9f':667,'\xa0':278,'\xa1':333,'\xa2':556,'\xa3':556,'\xa4':556,'\xa5':556,'\xa6':260,'\xa7':556,'\xa8':333,'\xa9':737,'\xaa':370,'\xab':556,'\xac':584,'\xad':333,'\xae':737,'\xaf':333,
+    '\xb0':400,'\xb1':584,'\xb2':333,'\xb3':333,'\xb4':333,'\xb5':556,'\xb6':537,'\xb7':278,'\xb8':333,'\xb9':333,'\xba':365,'\xbb':556,'\xbc':834,'\xbd':834,'\xbe':834,'\xbf':611,'\xc0':667,'\xc1':667,'\xc2':667,'\xc3':667,'\xc4':667,'\xc5':667,
+    '\xc6':1000,'\xc7':722,'\xc8':667,'\xc9':667,'\xca':667,'\xcb':667,'\xcc':278,'\xcd':278,'\xce':278,'\xcf':278,'\xd0':722,'\xd1':722,'\xd2':778,'\xd3':778,'\xd4':778,'\xd5':778,'\xd6':778,'\xd7':584,'\xd8':778,'\xd9':722,'\xda':722,'\xdb':722,
+    '\xdc':722,'\xdd':667,'\xde':667,'\xdf':611,'\xe0':556,'\xe1':556,'\xe2':556,'\xe3':556,'\xe4':556,'\xe5':556,'\xe6':889,'\xe7':500,'\xe8':556,'\xe9':556,'\xea':556,'\xeb':556,'\xec':278,'\xed':278,'\xee':278,'\xef':278,'\xf0':556,'\xf1':556,
+    '\xf2':556,'\xf3':556,'\xf4':556,'\xf5':556,'\xf6':556,'\xf7':584,'\xf8':611,'\xf9':556,'\xfa':556,'\xfb':556,'\xfc':556,'\xfd':500,'\xfe':556,'\xff':500}
+
+fpdf_charwidths['helveticaB']={
+    '\x00':278,'\x01':278,'\x02':278,'\x03':278,'\x04':278,'\x05':278,'\x06':278,'\x07':278,'\x08':278,'\t':278,'\n':278,'\x0b':278,'\x0c':278,'\r':278,'\x0e':278,'\x0f':278,'\x10':278,'\x11':278,'\x12':278,'\x13':278,'\x14':278,'\x15':278,
+    '\x16':278,'\x17':278,'\x18':278,'\x19':278,'\x1a':278,'\x1b':278,'\x1c':278,'\x1d':278,'\x1e':278,'\x1f':278,' ':278,'!':333,'"':474,'#':556,'$':556,'%':889,'&':722,'\'':238,'(':333,')':333,'*':389,'+':584,
+    ',':278,'-':333,'.':278,'/':278,'0':556,'1':556,'2':556,'3':556,'4':556,'5':556,'6':556,'7':556,'8':556,'9':556,':':333,';':333,'<':584,'=':584,'>':584,'?':611,'@':975,'A':722,
+    'B':722,'C':722,'D':722,'E':667,'F':611,'G':778,'H':722,'I':278,'J':556,'K':722,'L':611,'M':833,'N':722,'O':778,'P':667,'Q':778,'R':722,'S':667,'T':611,'U':722,'V':667,'W':944,
+    'X':667,'Y':667,'Z':611,'[':333,'\\':278,']':333,'^':584,'_':556,'`':333,'a':556,'b':611,'c':556,'d':611,'e':556,'f':333,'g':611,'h':611,'i':278,'j':278,'k':556,'l':278,'m':889,
+    'n':611,'o':611,'p':611,'q':611,'r':389,'s':556,'t':333,'u':611,'v':556,'w':778,'x':556,'y':556,'z':500,'{':389,'|':280,'}':389,'~':584,'\x7f':350,'\x80':556,'\x81':350,'\x82':278,'\x83':556,
+    '\x84':500,'\x85':1000,'\x86':556,'\x87':556,'\x88':333,'\x89':1000,'\x8a':667,'\x8b':333,'\x8c':1000,'\x8d':350,'\x8e':611,'\x8f':350,'\x90':350,'\x91':278,'\x92':278,'\x93':500,'\x94':500,'\x95':350,'\x96':556,'\x97':1000,'\x98':333,'\x99':1000,
+    '\x9a':556,'\x9b':333,'\x9c':944,'\x9d':350,'\x9e':500,'\x9f':667,'\xa0':278,'\xa1':333,'\xa2':556,'\xa3':556,'\xa4':556,'\xa5':556,'\xa6':280,'\xa7':556,'\xa8':333,'\xa9':737,'\xaa':370,'\xab':556,'\xac':584,'\xad':333,'\xae':737,'\xaf':333,
+    '\xb0':400,'\xb1':584,'\xb2':333,'\xb3':333,'\xb4':333,'\xb5':611,'\xb6':556,'\xb7':278,'\xb8':333,'\xb9':333,'\xba':365,'\xbb':556,'\xbc':834,'\xbd':834,'\xbe':834,'\xbf':611,'\xc0':722,'\xc1':722,'\xc2':722,'\xc3':722,'\xc4':722,'\xc5':722,
+    '\xc6':1000,'\xc7':722,'\xc8':667,'\xc9':667,'\xca':667,'\xcb':667,'\xcc':278,'\xcd':278,'\xce':278,'\xcf':278,'\xd0':722,'\xd1':722,'\xd2':778,'\xd3':778,'\xd4':778,'\xd5':778,'\xd6':778,'\xd7':584,'\xd8':778,'\xd9':722,'\xda':722,'\xdb':722,
+    '\xdc':722,'\xdd':667,'\xde':667,'\xdf':611,'\xe0':556,'\xe1':556,'\xe2':556,'\xe3':556,'\xe4':556,'\xe5':556,'\xe6':889,'\xe7':556,'\xe8':556,'\xe9':556,'\xea':556,'\xeb':556,'\xec':278,'\xed':278,'\xee':278,'\xef':278,'\xf0':611,'\xf1':611,
+    '\xf2':611,'\xf3':611,'\xf4':611,'\xf5':611,'\xf6':611,'\xf7':584,'\xf8':611,'\xf9':611,'\xfa':611,'\xfb':611,'\xfc':611,'\xfd':556,'\xfe':611,'\xff':556
+}
+
+fpdf_charwidths['helveticaBI']={
+    '\x00':278,'\x01':278,'\x02':278,'\x03':278,'\x04':278,'\x05':278,'\x06':278,'\x07':278,'\x08':278,'\t':278,'\n':278,'\x0b':278,'\x0c':278,'\r':278,'\x0e':278,'\x0f':278,'\x10':278,'\x11':278,'\x12':278,'\x13':278,'\x14':278,'\x15':278,
+    '\x16':278,'\x17':278,'\x18':278,'\x19':278,'\x1a':278,'\x1b':278,'\x1c':278,'\x1d':278,'\x1e':278,'\x1f':278,' ':278,'!':333,'"':474,'#':556,'$':556,'%':889,'&':722,'\'':238,'(':333,')':333,'*':389,'+':584,
+    ',':278,'-':333,'.':278,'/':278,'0':556,'1':556,'2':556,'3':556,'4':556,'5':556,'6':556,'7':556,'8':556,'9':556,':':333,';':333,'<':584,'=':584,'>':584,'?':611,'@':975,'A':722,
+    'B':722,'C':722,'D':722,'E':667,'F':611,'G':778,'H':722,'I':278,'J':556,'K':722,'L':611,'M':833,'N':722,'O':778,'P':667,'Q':778,'R':722,'S':667,'T':611,'U':722,'V':667,'W':944,
+    'X':667,'Y':667,'Z':611,'[':333,'\\':278,']':333,'^':584,'_':556,'`':333,'a':556,'b':611,'c':556,'d':611,'e':556,'f':333,'g':611,'h':611,'i':278,'j':278,'k':556,'l':278,'m':889,
+    'n':611,'o':611,'p':611,'q':611,'r':389,'s':556,'t':333,'u':611,'v':556,'w':778,'x':556,'y':556,'z':500,'{':389,'|':280,'}':389,'~':584,'\x7f':350,'\x80':556,'\x81':350,'\x82':278,'\x83':556,
+    '\x84':500,'\x85':1000,'\x86':556,'\x87':556,'\x88':333,'\x89':1000,'\x8a':667,'\x8b':333,'\x8c':1000,'\x8d':350,'\x8e':611,'\x8f':350,'\x90':350,'\x91':278,'\x92':278,'\x93':500,'\x94':500,'\x95':350,'\x96':556,'\x97':1000,'\x98':333,'\x99':1000,
+    '\x9a':556,'\x9b':333,'\x9c':944,'\x9d':350,'\x9e':500,'\x9f':667,'\xa0':278,'\xa1':333,'\xa2':556,'\xa3':556,'\xa4':556,'\xa5':556,'\xa6':280,'\xa7':556,'\xa8':333,'\xa9':737,'\xaa':370,'\xab':556,'\xac':584,'\xad':333,'\xae':737,'\xaf':333,
+    '\xb0':400,'\xb1':584,'\xb2':333,'\xb3':333,'\xb4':333,'\xb5':611,'\xb6':556,'\xb7':278,'\xb8':333,'\xb9':333,'\xba':365,'\xbb':556,'\xbc':834,'\xbd':834,'\xbe':834,'\xbf':611,'\xc0':722,'\xc1':722,'\xc2':722,'\xc3':722,'\xc4':722,'\xc5':722,
+    '\xc6':1000,'\xc7':722,'\xc8':667,'\xc9':667,'\xca':667,'\xcb':667,'\xcc':278,'\xcd':278,'\xce':278,'\xcf':278,'\xd0':722,'\xd1':722,'\xd2':778,'\xd3':778,'\xd4':778,'\xd5':778,'\xd6':778,'\xd7':584,'\xd8':778,'\xd9':722,'\xda':722,'\xdb':722,
+    '\xdc':722,'\xdd':667,'\xde':667,'\xdf':611,'\xe0':556,'\xe1':556,'\xe2':556,'\xe3':556,'\xe4':556,'\xe5':556,'\xe6':889,'\xe7':556,'\xe8':556,'\xe9':556,'\xea':556,'\xeb':556,'\xec':278,'\xed':278,'\xee':278,'\xef':278,'\xf0':611,'\xf1':611,
+    '\xf2':611,'\xf3':611,'\xf4':611,'\xf5':611,'\xf6':611,'\xf7':584,'\xf8':611,'\xf9':611,'\xfa':611,'\xfb':611,'\xfc':611,'\xfd':556,'\xfe':611,'\xff':556}
+
+fpdf_charwidths['helveticaI']={
+    '\x00':278,'\x01':278,'\x02':278,'\x03':278,'\x04':278,'\x05':278,'\x06':278,'\x07':278,'\x08':278,'\t':278,'\n':278,'\x0b':278,'\x0c':278,'\r':278,'\x0e':278,'\x0f':278,'\x10':278,'\x11':278,'\x12':278,'\x13':278,'\x14':278,'\x15':278,
+    '\x16':278,'\x17':278,'\x18':278,'\x19':278,'\x1a':278,'\x1b':278,'\x1c':278,'\x1d':278,'\x1e':278,'\x1f':278,' ':278,'!':278,'"':355,'#':556,'$':556,'%':889,'&':667,'\'':191,'(':333,')':333,'*':389,'+':584,
+    ',':278,'-':333,'.':278,'/':278,'0':556,'1':556,'2':556,'3':556,'4':556,'5':556,'6':556,'7':556,'8':556,'9':556,':':278,';':278,'<':584,'=':584,'>':584,'?':556,'@':1015,'A':667,
+    'B':667,'C':722,'D':722,'E':667,'F':611,'G':778,'H':722,'I':278,'J':500,'K':667,'L':556,'M':833,'N':722,'O':778,'P':667,'Q':778,'R':722,'S':667,'T':611,'U':722,'V':667,'W':944,
+    'X':667,'Y':667,'Z':611,'[':278,'\\':278,']':278,'^':469,'_':556,'`':333,'a':556,'b':556,'c':500,'d':556,'e':556,'f':278,'g':556,'h':556,'i':222,'j':222,'k':500,'l':222,'m':833,
+    'n':556,'o':556,'p':556,'q':556,'r':333,'s':500,'t':278,'u':556,'v':500,'w':722,'x':500,'y':500,'z':500,'{':334,'|':260,'}':334,'~':584,'\x7f':350,'\x80':556,'\x81':350,'\x82':222,'\x83':556,
+    '\x84':333,'\x85':1000,'\x86':556,'\x87':556,'\x88':333,'\x89':1000,'\x8a':667,'\x8b':333,'\x8c':1000,'\x8d':350,'\x8e':611,'\x8f':350,'\x90':350,'\x91':222,'\x92':222,'\x93':333,'\x94':333,'\x95':350,'\x96':556,'\x97':1000,'\x98':333,'\x99':1000,
+    '\x9a':500,'\x9b':333,'\x9c':944,'\x9d':350,'\x9e':500,'\x9f':667,'\xa0':278,'\xa1':333,'\xa2':556,'\xa3':556,'\xa4':556,'\xa5':556,'\xa6':260,'\xa7':556,'\xa8':333,'\xa9':737,'\xaa':370,'\xab':556,'\xac':584,'\xad':333,'\xae':737,'\xaf':333,
+    '\xb0':400,'\xb1':584,'\xb2':333,'\xb3':333,'\xb4':333,'\xb5':556,'\xb6':537,'\xb7':278,'\xb8':333,'\xb9':333,'\xba':365,'\xbb':556,'\xbc':834,'\xbd':834,'\xbe':834,'\xbf':611,'\xc0':667,'\xc1':667,'\xc2':667,'\xc3':667,'\xc4':667,'\xc5':667,
+    '\xc6':1000,'\xc7':722,'\xc8':667,'\xc9':667,'\xca':667,'\xcb':667,'\xcc':278,'\xcd':278,'\xce':278,'\xcf':278,'\xd0':722,'\xd1':722,'\xd2':778,'\xd3':778,'\xd4':778,'\xd5':778,'\xd6':778,'\xd7':584,'\xd8':778,'\xd9':722,'\xda':722,'\xdb':722,
+    '\xdc':722,'\xdd':667,'\xde':667,'\xdf':611,'\xe0':556,'\xe1':556,'\xe2':556,'\xe3':556,'\xe4':556,'\xe5':556,'\xe6':889,'\xe7':500,'\xe8':556,'\xe9':556,'\xea':556,'\xeb':556,'\xec':278,'\xed':278,'\xee':278,'\xef':278,'\xf0':556,'\xf1':556,
+    '\xf2':556,'\xf3':556,'\xf4':556,'\xf5':556,'\xf6':556,'\xf7':584,'\xf8':611,'\xf9':556,'\xfa':556,'\xfb':556,'\xfc':556,'\xfd':500,'\xfe':556,'\xff':500}
+
+fpdf_charwidths['symbol']={
+    '\x00':250,'\x01':250,'\x02':250,'\x03':250,'\x04':250,'\x05':250,'\x06':250,'\x07':250,'\x08':250,'\t':250,'\n':250,'\x0b':250,'\x0c':250,'\r':250,'\x0e':250,'\x0f':250,'\x10':250,'\x11':250,'\x12':250,'\x13':250,'\x14':250,'\x15':250,
+    '\x16':250,'\x17':250,'\x18':250,'\x19':250,'\x1a':250,'\x1b':250,'\x1c':250,'\x1d':250,'\x1e':250,'\x1f':250,' ':250,'!':333,'"':713,'#':500,'$':549,'%':833,'&':778,'\'':439,'(':333,')':333,'*':500,'+':549,
+    ',':250,'-':549,'.':250,'/':278,'0':500,'1':500,'2':500,'3':500,'4':500,'5':500,'6':500,'7':500,'8':500,'9':500,':':278,';':278,'<':549,'=':549,'>':549,'?':444,'@':549,'A':722,
+    'B':667,'C':722,'D':612,'E':611,'F':763,'G':603,'H':722,'I':333,'J':631,'K':722,'L':686,'M':889,'N':722,'O':722,'P':768,'Q':741,'R':556,'S':592,'T':611,'U':690,'V':439,'W':768,
+    'X':645,'Y':795,'Z':611,'[':333,'\\':863,']':333,'^':658,'_':500,'`':500,'a':631,'b':549,'c':549,'d':494,'e':439,'f':521,'g':411,'h':603,'i':329,'j':603,'k':549,'l':549,'m':576,
+    'n':521,'o':549,'p':549,'q':521,'r':549,'s':603,'t':439,'u':576,'v':713,'w':686,'x':493,'y':686,'z':494,'{':480,'|':200,'}':480,'~':549,'\x7f':0,'\x80':0,'\x81':0,'\x82':0,'\x83':0,
+    '\x84':0,'\x85':0,'\x86':0,'\x87':0,'\x88':0,'\x89':0,'\x8a':0,'\x8b':0,'\x8c':0,'\x8d':0,'\x8e':0,'\x8f':0,'\x90':0,'\x91':0,'\x92':0,'\x93':0,'\x94':0,'\x95':0,'\x96':0,'\x97':0,'\x98':0,'\x99':0,
+    '\x9a':0,'\x9b':0,'\x9c':0,'\x9d':0,'\x9e':0,'\x9f':0,'\xa0':750,'\xa1':620,'\xa2':247,'\xa3':549,'\xa4':167,'\xa5':713,'\xa6':500,'\xa7':753,'\xa8':753,'\xa9':753,'\xaa':753,'\xab':1042,'\xac':987,'\xad':603,'\xae':987,'\xaf':603,
+    '\xb0':400,'\xb1':549,'\xb2':411,'\xb3':549,'\xb4':549,'\xb5':713,'\xb6':494,'\xb7':460,'\xb8':549,'\xb9':549,'\xba':549,'\xbb':549,'\xbc':1000,'\xbd':603,'\xbe':1000,'\xbf':658,'\xc0':823,'\xc1':686,'\xc2':795,'\xc3':987,'\xc4':768,'\xc5':768,
+    '\xc6':823,'\xc7':768,'\xc8':768,'\xc9':713,'\xca':713,'\xcb':713,'\xcc':713,'\xcd':713,'\xce':713,'\xcf':713,'\xd0':768,'\xd1':713,'\xd2':790,'\xd3':790,'\xd4':890,'\xd5':823,'\xd6':549,'\xd7':250,'\xd8':713,'\xd9':603,'\xda':603,'\xdb':1042,
+    '\xdc':987,'\xdd':603,'\xde':987,'\xdf':603,'\xe0':494,'\xe1':329,'\xe2':790,'\xe3':790,'\xe4':786,'\xe5':713,'\xe6':384,'\xe7':384,'\xe8':384,'\xe9':384,'\xea':384,'\xeb':384,'\xec':494,'\xed':494,'\xee':494,'\xef':494,'\xf0':0,'\xf1':329,
+    '\xf2':274,'\xf3':686,'\xf4':686,'\xf5':686,'\xf6':384,'\xf7':384,'\xf8':384,'\xf9':384,'\xfa':384,'\xfb':384,'\xfc':494,'\xfd':494,'\xfe':494,'\xff':0}
+
+fpdf_charwidths['times']={
+    '\x00':250,'\x01':250,'\x02':250,'\x03':250,'\x04':250,'\x05':250,'\x06':250,'\x07':250,'\x08':250,'\t':250,'\n':250,'\x0b':250,'\x0c':250,'\r':250,'\x0e':250,'\x0f':250,'\x10':250,'\x11':250,'\x12':250,'\x13':250,'\x14':250,'\x15':250,
+    '\x16':250,'\x17':250,'\x18':250,'\x19':250,'\x1a':250,'\x1b':250,'\x1c':250,'\x1d':250,'\x1e':250,'\x1f':250,' ':250,'!':333,'"':408,'#':500,'$':500,'%':833,'&':778,'\'':180,'(':333,')':333,'*':500,'+':564,
+    ',':250,'-':333,'.':250,'/':278,'0':500,'1':500,'2':500,'3':500,'4':500,'5':500,'6':500,'7':500,'8':500,'9':500,':':278,';':278,'<':564,'=':564,'>':564,'?':444,'@':921,'A':722,
+    'B':667,'C':667,'D':722,'E':611,'F':556,'G':722,'H':722,'I':333,'J':389,'K':722,'L':611,'M':889,'N':722,'O':722,'P':556,'Q':722,'R':667,'S':556,'T':611,'U':722,'V':722,'W':944,
+    'X':722,'Y':722,'Z':611,'[':333,'\\':278,']':333,'^':469,'_':500,'`':333,'a':444,'b':500,'c':444,'d':500,'e':444,'f':333,'g':500,'h':500,'i':278,'j':278,'k':500,'l':278,'m':778,
+    'n':500,'o':500,'p':500,'q':500,'r':333,'s':389,'t':278,'u':500,'v':500,'w':722,'x':500,'y':500,'z':444,'{':480,'|':200,'}':480,'~':541,'\x7f':350,'\x80':500,'\x81':350,'\x82':333,'\x83':500,
+    '\x84':444,'\x85':1000,'\x86':500,'\x87':500,'\x88':333,'\x89':1000,'\x8a':556,'\x8b':333,'\x8c':889,'\x8d':350,'\x8e':611,'\x8f':350,'\x90':350,'\x91':333,'\x92':333,'\x93':444,'\x94':444,'\x95':350,'\x96':500,'\x97':1000,'\x98':333,'\x99':980,
+    '\x9a':389,'\x9b':333,'\x9c':722,'\x9d':350,'\x9e':444,'\x9f':722,'\xa0':250,'\xa1':333,'\xa2':500,'\xa3':500,'\xa4':500,'\xa5':500,'\xa6':200,'\xa7':500,'\xa8':333,'\xa9':760,'\xaa':276,'\xab':500,'\xac':564,'\xad':333,'\xae':760,'\xaf':333,
+    '\xb0':400,'\xb1':564,'\xb2':300,'\xb3':300,'\xb4':333,'\xb5':500,'\xb6':453,'\xb7':250,'\xb8':333,'\xb9':300,'\xba':310,'\xbb':500,'\xbc':750,'\xbd':750,'\xbe':750,'\xbf':444,'\xc0':722,'\xc1':722,'\xc2':722,'\xc3':722,'\xc4':722,'\xc5':722,
+    '\xc6':889,'\xc7':667,'\xc8':611,'\xc9':611,'\xca':611,'\xcb':611,'\xcc':333,'\xcd':333,'\xce':333,'\xcf':333,'\xd0':722,'\xd1':722,'\xd2':722,'\xd3':722,'\xd4':722,'\xd5':722,'\xd6':722,'\xd7':564,'\xd8':722,'\xd9':722,'\xda':722,'\xdb':722,
+    '\xdc':722,'\xdd':722,'\xde':556,'\xdf':500,'\xe0':444,'\xe1':444,'\xe2':444,'\xe3':444,'\xe4':444,'\xe5':444,'\xe6':667,'\xe7':444,'\xe8':444,'\xe9':444,'\xea':444,'\xeb':444,'\xec':278,'\xed':278,'\xee':278,'\xef':278,'\xf0':500,'\xf1':500,
+    '\xf2':500,'\xf3':500,'\xf4':500,'\xf5':500,'\xf6':500,'\xf7':564,'\xf8':500,'\xf9':500,'\xfa':500,'\xfb':500,'\xfc':500,'\xfd':500,'\xfe':500,'\xff':500}
+
+fpdf_charwidths['timesB']={
+    '\x00':250,'\x01':250,'\x02':250,'\x03':250,'\x04':250,'\x05':250,'\x06':250,'\x07':250,'\x08':250,'\t':250,'\n':250,'\x0b':250,'\x0c':250,'\r':250,'\x0e':250,'\x0f':250,'\x10':250,'\x11':250,'\x12':250,'\x13':250,'\x14':250,'\x15':250,
+    '\x16':250,'\x17':250,'\x18':250,'\x19':250,'\x1a':250,'\x1b':250,'\x1c':250,'\x1d':250,'\x1e':250,'\x1f':250,' ':250,'!':333,'"':555,'#':500,'$':500,'%':1000,'&':833,'\'':278,'(':333,')':333,'*':500,'+':570,
+    ',':250,'-':333,'.':250,'/':278,'0':500,'1':500,'2':500,'3':500,'4':500,'5':500,'6':500,'7':500,'8':500,'9':500,':':333,';':333,'<':570,'=':570,'>':570,'?':500,'@':930,'A':722,
+    'B':667,'C':722,'D':722,'E':667,'F':611,'G':778,'H':778,'I':389,'J':500,'K':778,'L':667,'M':944,'N':722,'O':778,'P':611,'Q':778,'R':722,'S':556,'T':667,'U':722,'V':722,'W':1000,
+    'X':722,'Y':722,'Z':667,'[':333,'\\':278,']':333,'^':581,'_':500,'`':333,'a':500,'b':556,'c':444,'d':556,'e':444,'f':333,'g':500,'h':556,'i':278,'j':333,'k':556,'l':278,'m':833,
+    'n':556,'o':500,'p':556,'q':556,'r':444,'s':389,'t':333,'u':556,'v':500,'w':722,'x':500,'y':500,'z':444,'{':394,'|':220,'}':394,'~':520,'\x7f':350,'\x80':500,'\x81':350,'\x82':333,'\x83':500,
+    '\x84':500,'\x85':1000,'\x86':500,'\x87':500,'\x88':333,'\x89':1000,'\x8a':556,'\x8b':333,'\x8c':1000,'\x8d':350,'\x8e':667,'\x8f':350,'\x90':350,'\x91':333,'\x92':333,'\x93':500,'\x94':500,'\x95':350,'\x96':500,'\x97':1000,'\x98':333,'\x99':1000,
+    '\x9a':389,'\x9b':333,'\x9c':722,'\x9d':350,'\x9e':444,'\x9f':722,'\xa0':250,'\xa1':333,'\xa2':500,'\xa3':500,'\xa4':500,'\xa5':500,'\xa6':220,'\xa7':500,'\xa8':333,'\xa9':747,'\xaa':300,'\xab':500,'\xac':570,'\xad':333,'\xae':747,'\xaf':333,
+    '\xb0':400,'\xb1':570,'\xb2':300,'\xb3':300,'\xb4':333,'\xb5':556,'\xb6':540,'\xb7':250,'\xb8':333,'\xb9':300,'\xba':330,'\xbb':500,'\xbc':750,'\xbd':750,'\xbe':750,'\xbf':500,'\xc0':722,'\xc1':722,'\xc2':722,'\xc3':722,'\xc4':722,'\xc5':722,
+    '\xc6':1000,'\xc7':722,'\xc8':667,'\xc9':667,'\xca':667,'\xcb':667,'\xcc':389,'\xcd':389,'\xce':389,'\xcf':389,'\xd0':722,'\xd1':722,'\xd2':778,'\xd3':778,'\xd4':778,'\xd5':778,'\xd6':778,'\xd7':570,'\xd8':778,'\xd9':722,'\xda':722,'\xdb':722,
+    '\xdc':722,'\xdd':722,'\xde':611,'\xdf':556,'\xe0':500,'\xe1':500,'\xe2':500,'\xe3':500,'\xe4':500,'\xe5':500,'\xe6':722,'\xe7':444,'\xe8':444,'\xe9':444,'\xea':444,'\xeb':444,'\xec':278,'\xed':278,'\xee':278,'\xef':278,'\xf0':500,'\xf1':556,
+    '\xf2':500,'\xf3':500,'\xf4':500,'\xf5':500,'\xf6':500,'\xf7':570,'\xf8':500,'\xf9':556,'\xfa':556,'\xfb':556,'\xfc':556,'\xfd':500,'\xfe':556,'\xff':500}
+
+fpdf_charwidths['timesBI']={
+    '\x00':250,'\x01':250,'\x02':250,'\x03':250,'\x04':250,'\x05':250,'\x06':250,'\x07':250,'\x08':250,'\t':250,'\n':250,'\x0b':250,'\x0c':250,'\r':250,'\x0e':250,'\x0f':250,'\x10':250,'\x11':250,'\x12':250,'\x13':250,'\x14':250,'\x15':250,
+    '\x16':250,'\x17':250,'\x18':250,'\x19':250,'\x1a':250,'\x1b':250,'\x1c':250,'\x1d':250,'\x1e':250,'\x1f':250,' ':250,'!':389,'"':555,'#':500,'$':500,'%':833,'&':778,'\'':278,'(':333,')':333,'*':500,'+':570,
+    ',':250,'-':333,'.':250,'/':278,'0':500,'1':500,'2':500,'3':500,'4':500,'5':500,'6':500,'7':500,'8':500,'9':500,':':333,';':333,'<':570,'=':570,'>':570,'?':500,'@':832,'A':667,
+    'B':667,'C':667,'D':722,'E':667,'F':667,'G':722,'H':778,'I':389,'J':500,'K':667,'L':611,'M':889,'N':722,'O':722,'P':611,'Q':722,'R':667,'S':556,'T':611,'U':722,'V':667,'W':889,
+    'X':667,'Y':611,'Z':611,'[':333,'\\':278,']':333,'^':570,'_':500,'`':333,'a':500,'b':500,'c':444,'d':500,'e':444,'f':333,'g':500,'h':556,'i':278,'j':278,'k':500,'l':278,'m':778,
+    'n':556,'o':500,'p':500,'q':500,'r':389,'s':389,'t':278,'u':556,'v':444,'w':667,'x':500,'y':444,'z':389,'{':348,'|':220,'}':348,'~':570,'\x7f':350,'\x80':500,'\x81':350,'\x82':333,'\x83':500,
+    '\x84':500,'\x85':1000,'\x86':500,'\x87':500,'\x88':333,'\x89':1000,'\x8a':556,'\x8b':333,'\x8c':944,'\x8d':350,'\x8e':611,'\x8f':350,'\x90':350,'\x91':333,'\x92':333,'\x93':500,'\x94':500,'\x95':350,'\x96':500,'\x97':1000,'\x98':333,'\x99':1000,
+    '\x9a':389,'\x9b':333,'\x9c':722,'\x9d':350,'\x9e':389,'\x9f':611,'\xa0':250,'\xa1':389,'\xa2':500,'\xa3':500,'\xa4':500,'\xa5':500,'\xa6':220,'\xa7':500,'\xa8':333,'\xa9':747,'\xaa':266,'\xab':500,'\xac':606,'\xad':333,'\xae':747,'\xaf':333,
+    '\xb0':400,'\xb1':570,'\xb2':300,'\xb3':300,'\xb4':333,'\xb5':576,'\xb6':500,'\xb7':250,'\xb8':333,'\xb9':300,'\xba':300,'\xbb':500,'\xbc':750,'\xbd':750,'\xbe':750,'\xbf':500,'\xc0':667,'\xc1':667,'\xc2':667,'\xc3':667,'\xc4':667,'\xc5':667,
+    '\xc6':944,'\xc7':667,'\xc8':667,'\xc9':667,'\xca':667,'\xcb':667,'\xcc':389,'\xcd':389,'\xce':389,'\xcf':389,'\xd0':722,'\xd1':722,'\xd2':722,'\xd3':722,'\xd4':722,'\xd5':722,'\xd6':722,'\xd7':570,'\xd8':722,'\xd9':722,'\xda':722,'\xdb':722,
+    '\xdc':722,'\xdd':611,'\xde':611,'\xdf':500,'\xe0':500,'\xe1':500,'\xe2':500,'\xe3':500,'\xe4':500,'\xe5':500,'\xe6':722,'\xe7':444,'\xe8':444,'\xe9':444,'\xea':444,'\xeb':444,'\xec':278,'\xed':278,'\xee':278,'\xef':278,'\xf0':500,'\xf1':556,
+    '\xf2':500,'\xf3':500,'\xf4':500,'\xf5':500,'\xf6':500,'\xf7':570,'\xf8':500,'\xf9':556,'\xfa':556,'\xfb':556,'\xfc':556,'\xfd':444,'\xfe':500,'\xff':444}
+
+fpdf_charwidths['timesI']={
+    '\x00':250,'\x01':250,'\x02':250,'\x03':250,'\x04':250,'\x05':250,'\x06':250,'\x07':250,'\x08':250,'\t':250,'\n':250,'\x0b':250,'\x0c':250,'\r':250,'\x0e':250,'\x0f':250,'\x10':250,'\x11':250,'\x12':250,'\x13':250,'\x14':250,'\x15':250,
+    '\x16':250,'\x17':250,'\x18':250,'\x19':250,'\x1a':250,'\x1b':250,'\x1c':250,'\x1d':250,'\x1e':250,'\x1f':250,' ':250,'!':333,'"':420,'#':500,'$':500,'%':833,'&':778,'\'':214,'(':333,')':333,'*':500,'+':675,
+    ',':250,'-':333,'.':250,'/':278,'0':500,'1':500,'2':500,'3':500,'4':500,'5':500,'6':500,'7':500,'8':500,'9':500,':':333,';':333,'<':675,'=':675,'>':675,'?':500,'@':920,'A':611,
+    'B':611,'C':667,'D':722,'E':611,'F':611,'G':722,'H':722,'I':333,'J':444,'K':667,'L':556,'M':833,'N':667,'O':722,'P':611,'Q':722,'R':611,'S':500,'T':556,'U':722,'V':611,'W':833,
+    'X':611,'Y':556,'Z':556,'[':389,'\\':278,']':389,'^':422,'_':500,'`':333,'a':500,'b':500,'c':444,'d':500,'e':444,'f':278,'g':500,'h':500,'i':278,'j':278,'k':444,'l':278,'m':722,
+    'n':500,'o':500,'p':500,'q':500,'r':389,'s':389,'t':278,'u':500,'v':444,'w':667,'x':444,'y':444,'z':389,'{':400,'|':275,'}':400,'~':541,'\x7f':350,'\x80':500,'\x81':350,'\x82':333,'\x83':500,
+    '\x84':556,'\x85':889,'\x86':500,'\x87':500,'\x88':333,'\x89':1000,'\x8a':500,'\x8b':333,'\x8c':944,'\x8d':350,'\x8e':556,'\x8f':350,'\x90':350,'\x91':333,'\x92':333,'\x93':556,'\x94':556,'\x95':350,'\x96':500,'\x97':889,'\x98':333,'\x99':980,
+    '\x9a':389,'\x9b':333,'\x9c':667,'\x9d':350,'\x9e':389,'\x9f':556,'\xa0':250,'\xa1':389,'\xa2':500,'\xa3':500,'\xa4':500,'\xa5':500,'\xa6':275,'\xa7':500,'\xa8':333,'\xa9':760,'\xaa':276,'\xab':500,'\xac':675,'\xad':333,'\xae':760,'\xaf':333,
+    '\xb0':400,'\xb1':675,'\xb2':300,'\xb3':300,'\xb4':333,'\xb5':500,'\xb6':523,'\xb7':250,'\xb8':333,'\xb9':300,'\xba':310,'\xbb':500,'\xbc':750,'\xbd':750,'\xbe':750,'\xbf':500,'\xc0':611,'\xc1':611,'\xc2':611,'\xc3':611,'\xc4':611,'\xc5':611,
+    '\xc6':889,'\xc7':667,'\xc8':611,'\xc9':611,'\xca':611,'\xcb':611,'\xcc':333,'\xcd':333,'\xce':333,'\xcf':333,'\xd0':722,'\xd1':667,'\xd2':722,'\xd3':722,'\xd4':722,'\xd5':722,'\xd6':722,'\xd7':675,'\xd8':722,'\xd9':722,'\xda':722,'\xdb':722,
+    '\xdc':722,'\xdd':556,'\xde':611,'\xdf':500,'\xe0':500,'\xe1':500,'\xe2':500,'\xe3':500,'\xe4':500,'\xe5':500,'\xe6':667,'\xe7':444,'\xe8':444,'\xe9':444,'\xea':444,'\xeb':444,'\xec':278,'\xed':278,'\xee':278,'\xef':278,'\xf0':500,'\xf1':500,
+    '\xf2':500,'\xf3':500,'\xf4':500,'\xf5':500,'\xf6':500,'\xf7':675,'\xf8':500,'\xf9':500,'\xfa':500,'\xfb':500,'\xfc':500,'\xfd':444,'\xfe':500,'\xff':444}
+
+fpdf_charwidths['zapfdingbats']={
+    '\x00':0,'\x01':0,'\x02':0,'\x03':0,'\x04':0,'\x05':0,'\x06':0,'\x07':0,'\x08':0,'\t':0,'\n':0,'\x0b':0,'\x0c':0,'\r':0,'\x0e':0,'\x0f':0,'\x10':0,'\x11':0,'\x12':0,'\x13':0,'\x14':0,'\x15':0,
+    '\x16':0,'\x17':0,'\x18':0,'\x19':0,'\x1a':0,'\x1b':0,'\x1c':0,'\x1d':0,'\x1e':0,'\x1f':0,' ':278,'!':974,'"':961,'#':974,'$':980,'%':719,'&':789,'\'':790,'(':791,')':690,'*':960,'+':939,
+    ',':549,'-':855,'.':911,'/':933,'0':911,'1':945,'2':974,'3':755,'4':846,'5':762,'6':761,'7':571,'8':677,'9':763,':':760,';':759,'<':754,'=':494,'>':552,'?':537,'@':577,'A':692,
+    'B':786,'C':788,'D':788,'E':790,'F':793,'G':794,'H':816,'I':823,'J':789,'K':841,'L':823,'M':833,'N':816,'O':831,'P':923,'Q':744,'R':723,'S':749,'T':790,'U':792,'V':695,'W':776,
+    'X':768,'Y':792,'Z':759,'[':707,'\\':708,']':682,'^':701,'_':826,'`':815,'a':789,'b':789,'c':707,'d':687,'e':696,'f':689,'g':786,'h':787,'i':713,'j':791,'k':785,'l':791,'m':873,
+    'n':761,'o':762,'p':762,'q':759,'r':759,'s':892,'t':892,'u':788,'v':784,'w':438,'x':138,'y':277,'z':415,'{':392,'|':392,'}':668,'~':668,'\x7f':0,'\x80':390,'\x81':390,'\x82':317,'\x83':317,
+    '\x84':276,'\x85':276,'\x86':509,'\x87':509,'\x88':410,'\x89':410,'\x8a':234,'\x8b':234,'\x8c':334,'\x8d':334,'\x8e':0,'\x8f':0,'\x90':0,'\x91':0,'\x92':0,'\x93':0,'\x94':0,'\x95':0,'\x96':0,'\x97':0,'\x98':0,'\x99':0,
+    '\x9a':0,'\x9b':0,'\x9c':0,'\x9d':0,'\x9e':0,'\x9f':0,'\xa0':0,'\xa1':732,'\xa2':544,'\xa3':544,'\xa4':910,'\xa5':667,'\xa6':760,'\xa7':760,'\xa8':776,'\xa9':595,'\xaa':694,'\xab':626,'\xac':788,'\xad':788,'\xae':788,'\xaf':788,
+    '\xb0':788,'\xb1':788,'\xb2':788,'\xb3':788,'\xb4':788,'\xb5':788,'\xb6':788,'\xb7':788,'\xb8':788,'\xb9':788,'\xba':788,'\xbb':788,'\xbc':788,'\xbd':788,'\xbe':788,'\xbf':788,'\xc0':788,'\xc1':788,'\xc2':788,'\xc3':788,'\xc4':788,'\xc5':788,
+    '\xc6':788,'\xc7':788,'\xc8':788,'\xc9':788,'\xca':788,'\xcb':788,'\xcc':788,'\xcd':788,'\xce':788,'\xcf':788,'\xd0':788,'\xd1':788,'\xd2':788,'\xd3':788,'\xd4':894,'\xd5':838,'\xd6':1016,'\xd7':458,'\xd8':748,'\xd9':924,'\xda':748,'\xdb':918,
+    '\xdc':927,'\xdd':928,'\xde':928,'\xdf':834,'\xe0':873,'\xe1':828,'\xe2':924,'\xe3':924,'\xe4':917,'\xe5':930,'\xe6':931,'\xe7':463,'\xe8':883,'\xe9':836,'\xea':836,'\xeb':867,'\xec':867,'\xed':696,'\xee':696,'\xef':874,'\xf0':0,'\xf1':874,
+    '\xf2':760,'\xf3':946,'\xf4':771,'\xf5':865,'\xf6':771,'\xf7':888,'\xf8':967,'\xf9':888,'\xfa':831,'\xfb':873,'\xfc':927,'\xfd':970,'\xfe':918,'\xff':0}
+
+

ADDED   gluon/contrib/pyfpdf/html.py
Index: gluon/contrib/pyfpdf/html.py
==================================================================
--- /dev/null
+++ gluon/contrib/pyfpdf/html.py
@@ -0,0 +1,456 @@
+# -*- coding: latin-1 -*-
+
+"HTML Renderer for FPDF.py"
+
+__author__ = "Mariano Reingart <reingart@gmail.com>"
+__copyright__ = "Copyright (C) 2010 Mariano Reingart"
+__license__ = "LGPL 3.0"
+
+# Inspired by tuto5.py and several examples from fpdf.org, html2fpdf, etc.
+
+from fpdf import FPDF
+from HTMLParser import HTMLParser
+
+DEBUG = False
+
+def px2mm(px):
+    return int(px)*25.4/72.0
+
+def hex2dec(color = "#000000"):
+    if color:
+        r = int(color[1:3], 16)
+        g = int(color[3:5], 16)
+        b = int(color[5:7], 16)
+        return r, g, b
+
+class HTML2FPDF(HTMLParser):
+    "Render basic HTML to FPDF"
+
+    def __init__(self, pdf, image_map):
+        HTMLParser.__init__(self)
+        self.image_map = image_map
+        self.style = {}
+        self.pre = False
+        self.href = ''
+        self.align = ''
+        self.page_links = {}
+        self.font_list = ("times","courier", "helvetica")
+        self.pdf = pdf
+        self.r = self.g = self.b = 0
+        self.indent = 0
+        self.bullet = []
+        self.set_font("times", 12)
+        self.table = None           # table attributes
+        self.table_col_width = None # column (header) widths
+        self.table_col_index = None # current column index
+        self.td = None              # cell attributes
+        self.th = False             # header enabled
+        self.tr = None
+        self.theader = None           # table header cells
+        self.tfooter = None           # table footer cells
+        self.thead = None
+        self.tfoot = None
+        self.theader_out = self.tfooter_out = False
+
+    def width2mm(self, length):
+        if length[-1]=='%':
+            total = self.pdf.w - self.pdf.r_margin - self.pdf.l_margin
+            if self.table['width'][-1]=='%':
+                total *= int(self.table['width'][:-1])/100.0
+            return int(length[:-1]) * total / 101.0
+        else:
+            return int(length) / 6.0
+
+    def handle_data(self, txt):
+        if self.td is not None: # drawing a table?
+            if 'width' not in self.td and 'colspan' not in self.td:
+                l = [self.table_col_width[self.table_col_index]]
+            elif 'colspan' in self.td:
+                i = self.table_col_index
+                colspan = int(self.td['colspan'])
+                l = self.table_col_width[i:i+colspan]
+            else:
+                l = [self.td.get('width','240')]
+            w = sum([self.width2mm(lenght) for lenght in l])
+            h = int(self.td.get('height', 0)) / 4 or self.h*1.30
+            self.table_h = h
+            border = int(self.table.get('border', 0))
+            if not self.th:
+                align = self.td.get('align', 'L')[0].upper()
+                border = border and 'LR'
+            else:
+                self.set_style('B',True)
+                border = border or 'B'
+                align = 'C'
+            bgcolor = hex2dec(self.td.get('bgcolor', self.tr.get('bgcolor', '')))
+            # parsing table header/footer (drawn later):
+            if self.thead is not None:
+                self.theader.append(((w,h,txt,border,0,align), bgcolor))
+            if self.tfoot is not None:
+                self.tfooter.append(((w,h,txt,border,0,align), bgcolor))
+            # check if reached end of page, add table footer and header:
+            height = h + (self.tfooter and self.tfooter[0][0][1] or 0)
+            if self.pdf.y+height>self.pdf.page_break_trigger and not self.th:
+                self.output_table_footer()
+                self.pdf.add_page()
+                self.theader_out = self.tfooter_out = False
+            if self.tfoot is None and self.thead is None:
+                if not self.theader_out:
+                    self.output_table_header()
+                self.box_shadow(w, h, bgcolor)
+                if DEBUG: print "td cell", self.pdf.x, w, txt, "*"
+                self.pdf.cell(w,h,txt,border,0,align)
+        elif self.table is not None:
+            # ignore anything else than td inside a table
+            pass
+        elif self.align:
+            if DEBUG: print "cell", txt, "*"
+            self.pdf.cell(0,self.h,txt,0,1,self.align[0].upper(), self.href)
+        else:
+            txt = txt.replace("\n"," ")
+            if self.href:
+                self.put_link(self.href,txt)
+            else:
+                if DEBUG: print "write", txt, "*"
+                self.pdf.write(self.h,txt)
+
+    def box_shadow(self, w, h, bgcolor):
+        if DEBUG: print "box_shadow", w, h, bgcolor
+        if bgcolor:
+            fill_color = self.pdf.fill_color
+            self.pdf.set_fill_color(*bgcolor)
+            self.pdf.rect(self.pdf.x, self.pdf.y, w, h, 'F')
+            self.pdf.fill_color = fill_color
+
+    def output_table_header(self):
+        if self.theader:
+            b = self.b
+            x = self.pdf.x
+            self.pdf.set_x(self.table_offset)
+            self.set_style('B',True)
+            for cell, bgcolor in self.theader:
+                self.box_shadow(cell[0], cell[1], bgcolor)
+                self.pdf.cell(*cell)
+            self.set_style('B',b)
+            self.pdf.ln(self.theader[0][0][1])
+            self.pdf.set_x(self.table_offset)
+            #self.pdf.set_x(x)
+        self.theader_out = True
+
+    def output_table_footer(self):
+        if self.tfooter:
+            x = self.pdf.x
+            self.pdf.set_x(self.table_offset)
+            #TODO: self.output_table_sep()
+            for cell, bgcolor in self.tfooter:
+                self.box_shadow(cell[0], cell[1], bgcolor)
+                self.pdf.cell(*cell)
+            self.pdf.ln(self.tfooter[0][0][1])
+            self.pdf.set_x(x)
+        if int(self.table.get('border', 0)):
+            self.output_table_sep()
+        self.tfooter_out = True
+
+    def output_table_sep(self):
+        self.pdf.set_x(self.table_offset)
+        x1 = self.pdf.x
+        y1 = self.pdf.y
+        w = sum([self.width2mm(lenght) for lenght in self.table_col_width])
+        self.pdf.line(x1,y1,x1+w,y1)
+
+
+    def handle_starttag(self, tag, attrs):
+        attrs = dict(attrs)
+        if DEBUG: print "STARTTAG", tag, attrs
+        if tag=='b' or tag=='i' or tag=='u':
+            self.set_style(tag,1)
+        if tag=='a':
+            self.href=attrs['href']
+        if tag=='br':
+            self.pdf.ln(5)
+        if tag=='p':
+            self.pdf.ln(5)
+            if attrs:
+                self.align=attrs['align'].lower()
+        if tag in ('h1', 'h2', 'h3', 'h4', 'h5', 'h6'):
+            k = (2, 1.5, 1.17, 1, 0.83, 0.67)[int(tag[1])]
+            self.pdf.ln(5*k)
+            self.pdf.set_text_color(150,0,0)
+            self.pdf.set_font_size(12 * k)
+            if attrs: self.align = attrs.get('align')
+        if tag=='hr':
+            self.put_line()
+        if tag=='pre':
+            self.pdf.set_font('Courier','',11)
+            self.pdf.set_font_size(11)
+            self.set_style('B',False)
+            self.set_style('I',False)
+            self.pre = True
+        if tag=='blockquote':
+            self.set_text_color(100,0,45)
+            self.pdf.ln(3)
+        if tag=='ul':
+            self.indent+=1
+            self.bullet.append('\x95')
+        if tag=='ol':
+            self.indent+=1
+            self.bullet.append(0)
+        if tag=='li':
+            self.pdf.ln(self.h+2)
+            self.pdf.set_text_color(190,0,0)
+            bullet = self.bullet[self.indent-1]
+            if not isinstance(bullet, basestring):
+                bullet += 1
+                self.bullet[self.indent-1] = bullet
+                bullet = "%s. " % bullet
+            self.pdf.write(self.h,'%s%s ' % (' '*5*self.indent, bullet))
+            self.set_text_color()
+        if tag=='font':
+            if 'color' in attrs:
+                self.color = hex2dec(attrs['color'])
+                self.set_text_color(*color)
+                self.color = color
+            if 'face' in attrs and attrs['face'].lower() in self.font_list:
+                face = attrs.get('face').lower()
+                self.pdf.set_font(face)
+                self.font_face = face
+            if 'size' in attrs:
+                face = attrs.get('size')
+                self.pdf.set_font('', size)
+                self.font_size = size
+        if tag=='table':
+            self.table = dict([(k.lower(), v) for k,v in attrs.items()])
+            if not 'width' in self.table:
+                self.table['width'] = '100%'
+            if self.table['width'][-1]=='%':
+                w = self.pdf.w - self.pdf.r_margin - self.pdf.l_margin
+                w *= int(self.table['width'][:-1])/100.0
+                self.table_offset = (self.pdf.w-w)/2.0
+            self.table_col_width = []
+            self.theader_out = self.tfooter_out = False
+            self.theader = []
+            self.tfooter = []
+            self.thead = None
+            self.tfoot = None
+            self.pdf.ln()
+        if tag=='tr':
+            self.tr = dict([(k.lower(), v) for k,v in attrs.items()])
+            self.table_col_index = 0
+            self.pdf.set_x(self.table_offset)
+        if tag=='td':
+            self.td = dict([(k.lower(), v) for k,v in attrs.items()])
+        if tag=='th':
+            self.td = dict([(k.lower(), v) for k,v in attrs.items()])
+            self.th = True
+            if self.td['width']:
+                self.table_col_width.append(self.td['width'])
+        if tag=='thead':
+            self.thead = {}
+        if tag=='tfoot':
+            self.tfoot = {}
+        if tag=='img':
+            if 'src' in attrs:
+                x = self.pdf.get_x()
+                y = self.pdf.get_y()
+                w = px2mm(attrs.get('width', 0))
+                h = px2mm(attrs.get('height',0))
+                if self.align and self.align[0].upper() == 'C':
+                    x = (self.pdf.w-x)/2.0 - w/2.0
+                self.pdf.image(self.image_map(attrs['src']),
+                               x, y, w, h, link=self.href)
+                self.pdf.set_x(x+w)
+                self.pdf.set_y(y+h)
+        if tag=='b' or tag=='i' or tag=='u':
+            self.set_style(tag, True)
+        if tag=='center':
+            self.align = 'Center'
+
+    def handle_endtag(self, tag):
+        #Closing tag
+        if DEBUG: print "ENDTAG", tag
+        if tag=='h1' or tag=='h2' or tag=='h3' or tag=='h4':
+            self.pdf.ln(6)
+            self.set_font()
+            self.set_style()
+            self.align = None
+        if tag=='pre':
+            self.pdf.set_font(self.font or 'Times','',12)
+            self.pdf.set_font_size(12)
+            self.pre=False
+        if tag=='blockquote':
+            self.set_text_color(0,0,0)
+            self.pdf.ln(3)
+        if tag=='strong':
+            tag='b'
+        if tag=='em':
+            tag='i'
+        if tag=='b' or tag=='i' or tag=='u':
+            self.set_style(tag, False)
+        if tag=='a':
+            self.href=''
+        if tag=='p':
+            self.align=''
+        if tag in ('ul', 'ol'):
+            self.indent-=1
+            self.bullet.pop()
+        if tag=='table':
+            if not self.tfooter_out:
+                self.output_table_footer()
+            self.table = None
+            self.th = False
+            self.theader = None
+            self.tfooter = None
+            self.pdf.ln()
+        if tag=='thead':
+            self.thead = None
+        if tag=='tfoot':
+            self.tfoot = None
+        if tag=='tbody':
+            # draw a line separator between table bodies
+            self.pdf.set_x(self.table_offset)
+            self.output_table_sep()
+        if tag=='tr':
+            h = self.table_h
+            if self.tfoot is None:
+                self.pdf.ln(h)
+            self.tr = None
+        if tag=='td' or tag=='th':
+            if self.th:
+                if DEBUG: print "revert style"
+                self.set_style('B', False) # revert style
+            self.table_col_index += int(self.td.get('colspan','1'))
+            self.td = None
+            self.th = False
+        if tag=='font':
+            if self.color:
+                self.pdf.set_text_color(0,0,0)
+                self.color = None
+            if self.font:
+                self.SetFont('Times','',12)
+                self.font = None
+        if tag=='center':
+            self.align = None
+
+    def set_font(self, face=None, size=None):
+        if face:
+            self.font_face = face
+        if size:
+            self.font_size = size
+            self.h = size / 72.0*25.4
+            if DEBUG: print "H", self.h
+        self.pdf.set_font(self.font_face or 'times','',12)
+        self.pdf.set_font_size(self.font_size or 12)
+        self.set_style('u', False)
+        self.set_style('b', False)
+        self.set_style('i', False)
+        self.set_text_color()
+
+    def set_style(self, tag=None, enable=None):
+        #Modify style and select corresponding font
+        if tag:
+            t = self.style.get(tag.lower())
+            self.style[tag.lower()] = enable
+        style=''
+        for s in ('b','i','u'):
+            if self.style.get(s):
+                style+=s
+        if DEBUG: print "SET_FONT_STYLE", style
+        self.pdf.set_font('',style)
+
+    def set_text_color(self, r=None, g=0, b=0):
+        if r is None:
+            self.pdf.set_text_color(self.r,self.g,self.b)
+        else:
+            self.pdf.set_text_color(r, g, b)
+            self.r = r
+            self.g = g
+            self.b = b
+
+    def put_link(self, url, txt):
+        #Put a hyperlink
+        self.set_text_color(0,0,255)
+        self.set_style('u', True)
+        self.pdf.write(5,txt,url)
+        self.set_style('u', False)
+        self.set_text_color(0)
+
+    def put_line(self):
+        self.pdf.ln(2)
+        self.pdf.line(self.pdf.get_x(),self.pdf.get_y(),self.pdf.get_x()+187,self.pdf.get_y())
+        self.pdf.ln(3)
+
+class HTMLMixin():
+    def write_html(self, text, image_map=lambda x:x):
+        "Parse HTML and convert it to PDF"
+        h2p = HTML2FPDF(self,image_map=image_map)
+        h2p.feed(text)
+
+if __name__=='__main__':
+    html="""
+<H1 align="center">html2fpdf</H1>
+<h2>Basic usage</h2>
+<p>You can now easily print text mixing different
+styles : <B>bold</B>, <I>italic</I>, <U>underlined</U>, or
+<B><I><U>all at once</U></I></B>!<BR>You can also insert links
+on text, such as <A HREF="http://www.fpdf.org">www.fpdf.org</A>,
+or on an image: click on the logo.<br>
+<center>
+<A HREF="http://www.fpdf.org"><img src="tutorial/logo.png" width="104" height="71"></A>
+</center>
+<h3>Sample List</h3>
+<ul><li>option 1</li>
+<ol><li>option 2</li></ol>
+<li>option 3</li></ul>
+
+<table border="0" align="center" width="50%">
+<thead><tr><th width="30%">Header 1</th><th width="70%">header 2</th></tr></thead>
+<tbody>
+<tr><td>cell 1</td><td>cell 2</td></tr>
+<tr><td>cell 2</td><td>cell 3</td></tr>
+</tbody>
+</table>
+
+
+<table border="1">
+<thead><tr bgcolor="#A0A0A0"><th width="30%">Header 1</th><th width="70%">header 2</th></tr></thead>
+<tfoot><tr bgcolor="#E0E0E0"><td>footer 1</td><td>footer 2</td></tr></tfoot>
+<tbody>
+<tr><td>cell 1</td><td>cell 2</td></tr>
+<tr>
+<td width="30%">cell 1</td><td width="70%" bgcolor="#D0D0FF" align='right'>cell 2</td>
+</tr>
+</tbody>
+<tbody><tr><td colspan="2">cell spanned</td></tr></tbody>
+<tbody>
+""" + """<tr bgcolor="#F0F0F0">
+<td>cell 3</td><td>cell 4</td>
+</tr><tr bgcolor="#FFFFFF">
+<td>cell 5</td><td>cell 6</td>
+</tr>""" * 200 + """
+</tbody>
+</table>
+"""
+
+    class MyFPDF(FPDF, HTMLMixin):
+        def header(self):
+            self.image('tutorial/logo_pb.png',10,8,33)
+            self.set_font('Arial','B',15)
+            self.cell(80)
+            self.cell(30,10,'Title',1,0,'C')
+            self.ln(20)
+
+        def footer(self):
+            self.set_y(-15)
+            self.set_font('Arial','I',8)
+            txt = 'Page %s of %s' % (self.page_no(), self.alias_nb_pages())
+            self.cell(0,10,txt,0,0,'C')
+
+    pdf=MyFPDF()
+    #First page
+    pdf.add_page()
+    pdf.write_html(html)
+    pdf.output('html.pdf','F')
+
+    import os
+    os.system("evince html.pdf")
+

ADDED   gluon/contrib/pyfpdf/template.py
Index: gluon/contrib/pyfpdf/template.py
==================================================================
--- /dev/null
+++ gluon/contrib/pyfpdf/template.py
@@ -0,0 +1,277 @@
+# -*- coding: iso-8859-1 -*-
+
+"PDF Template Helper for FPDF.py"
+
+__author__ = "Mariano Reingart <reingart@gmail.com>"
+__copyright__ = "Copyright (C) 2010 Mariano Reingart"
+__license__ = "LGPL 3.0"
+
+import sys,os,csv
+from fpdf import FPDF
+
+def rgb(col):
+    return (col // 65536), (col // 256 % 256), (col% 256)
+
+class Template:
+    def __init__(self, infile=None, elements=None, format='A4', orientation='portrait',
+                 title='', author='', subject='', creator='', keywords=''):
+        if elements:
+            self.elements = dict([(v['name'].lower(),v) for v in elements])
+        self.handlers = {'T': self.text, 'L': self.line, 'I': self.image,
+                         'B': self.rect, 'BC': self.barcode, }
+        self.pg_no = 0
+        self.texts = {}
+        pdf = self.pdf = FPDF(format=format,orientation=orientation, unit="mm")
+        pdf.set_title(title)
+        pdf.set_author(author)
+        pdf.set_creator(creator)
+        pdf.set_subject(subject)
+        pdf.set_keywords(keywords)
+
+    def parse_csv(self, infile, delimiter=",", decimal_sep="."):
+        "Parse template format csv file and create elements dict"
+        keys = ('name','type','x1','y1','x2','y2','font','size',
+            'bold','italic','underline','foreground','background',
+            'align','text','priority')
+        self.elements = {}
+        f = open(infile, 'rb')
+        try:
+            for row in csv.reader(f, delimiter=delimiter):
+                kargs = {}
+                for i,v in enumerate(row):
+                    if not v.startswith("'") and decimal_sep!=".":
+                        v = v.replace(decimal_sep,".")
+                    else:
+                        v = v
+                    if v=='':
+                        v = None
+                    else:
+                        v = eval(v.strip())
+                    kargs[keys[i]] = v
+                self.elements[kargs['name'].lower()] = kargs
+        finally:
+            f.close()
+
+    def add_page(self):
+        self.pg_no += 1
+        self.texts[self.pg_no] = {}
+
+    def __setitem__(self, name, value):
+        if name.lower() in self.elements:
+            if isinstance(value,unicode):
+                value = value.encode("latin1","ignore")
+            else:
+                value = str(value)
+            self.texts[self.pg_no][name.lower()] = value
+
+    # setitem shortcut (may be further extended)
+    set = __setitem__
+
+    def __getitem__(self, name):
+        if name.lower() in self.elements:
+            return self.texts[self.pg_no].get(name.lower(), self.elements[name.lower()]['text'])
+
+    def split_multicell(self, text, element_name):
+        "Divide (\n) a string using a given element width"
+        pdf = self.pdf
+        element = self.elements[element_name.lower()]
+        style = ""
+        if element['bold']: style += "B"
+        if element['italic']: style += "I"
+        if element['underline']: style += "U"
+        pdf.set_font(element['font'],style,element['size'])
+        align = {'L':'L','R':'R','I':'L','D':'R','C':'C','':''}.get(element['align']) # D/I in spanish
+        if isinstance(text, unicode):
+            text = text.encode("latin1","ignore")
+        else:
+            text = str(text)
+        return pdf.multi_cell(w=element['x2']-element['x1'],
+                             h=element['y2']-element['y1'],
+                             txt=text,align=align,split_only=True)
+
+    def render(self, outfile, dest="F"):
+        pdf = self.pdf
+        for pg in range(1, self.pg_no+1):
+            pdf.add_page()
+            pdf.set_font('Arial','B',16)
+            pdf.set_auto_page_break(False,margin=0)
+
+            for element in sorted(self.elements.values(),key=lambda x: x['priority']):
+                #print "dib",element['type'], element['name'], element['x1'], element['y1'], element['x2'], element['y2']
+                element = element.copy()
+                element['text'] = self.texts[pg].get(element['name'].lower(), element['text'])
+                if 'rotate' in element:
+                    pdf.rotate(element['rotate'], element['x1'], element['y1'])
+                self.handlers[element['type'].upper()](pdf, **element)
+                if 'rotate' in element:
+                    pdf.rotate(0)
+
+        return pdf.output(outfile, dest)
+
+    def text(self, pdf, x1=0, y1=0, x2=0, y2=0, text='', font="arial", size=10,
+             bold=False, italic=False, underline=False, align="",
+             foreground=0, backgroud=65535,
+             *args, **kwargs):
+        if text:
+            if pdf.text_color!=rgb(foreground):
+                pdf.set_text_color(*rgb(foreground))
+            if pdf.fill_color!=rgb(backgroud):
+                pdf.set_fill_color(*rgb(backgroud))
+
+            font = font.strip().lower()
+            if font == 'arial black':
+                font = 'arial'
+            style = ""
+            for tag in 'B', 'I', 'U':
+                if (text.startswith("<%s>" % tag) and text.endswith("</%s>" %tag)):
+                    text = text[3:-4]
+                    style += tag
+            if bold: style += "B"
+            if italic: style += "I"
+            if underline: style += "U"
+            align = {'L':'L','R':'R','I':'L','D':'R','C':'C','':''}.get(align) # D/I in spanish
+            pdf.set_font(font,style,size)
+            ##m_k = 72 / 2.54
+            ##h = (size/m_k)
+            pdf.set_xy(x1,y1)
+            pdf.cell(w=x2-x1,h=y2-y1,txt=text,border=0,ln=0,align=align)
+            #pdf.Text(x=x1,y=y1,txt=text)
+
+    def line(self, pdf, x1=0, y1=0, x2=0, y2=0, size=0, foreground=0, *args, **kwargs):
+        if pdf.draw_color!=rgb(foreground):
+            #print "SetDrawColor", hex(foreground)
+            pdf.set_draw_color(*rgb(foreground))
+        #print "SetLineWidth", size
+        pdf.set_line_width(size)
+        pdf.line(x1, y1, x2, y2)
+
+    def rect(self, pdf, x1=0, y1=0, x2=0, y2=0, size=0, foreground=0, backgroud=65535, *args, **kwargs):
+        if pdf.draw_color!=rgb(foreground):
+            pdf.set_draw_color(*rgb(foreground))
+        if pdf.fill_color!=rgb(backgroud):
+            pdf.set_fill_color(*rgb(backgroud))
+        pdf.set_line_width(size)
+        pdf.rect(x1, y1, x2-x1, y2-y1)
+
+    def image(self, pdf, x1=0, y1=0, x2=0, y2=0, text='', *args,**kwargs):
+        pdf.image(text,x1,y1,w=x2-x1,h=y2-y1,type='',link='')
+
+    def barcode(self, pdf, x1=0, y1=0, x2=0, y2=0, text='', font="arial", size=1,
+             foreground=0, *args, **kwargs):
+        if pdf.draw_color!=rgb(foreground):
+            pdf.set_draw_color(*rgb(foreground))
+        font = font.lower().strip()
+        if font == 'interleaved 2of5 nt':
+            pdf.interleaved2of5(text,x1,y1,w=size,h=y2-y1)
+
+
+if __name__ == "__main__":
+
+    # generate sample invoice (according Argentina's regulations)
+
+    import random
+    from decimal import Decimal
+
+    f = Template(format="A4",
+             title="Sample Invoice", author="Sample Company",
+             subject="Sample Customer", keywords="Electronic TAX Invoice")
+    f.parse_csv(infile="invoice.csv", delimiter=";", decimal_sep=",")
+
+    detail = "Lorem ipsum dolor sit amet, consectetur. " * 30
+    items = []
+    for i in range(1, 30):
+        ds = "Sample product %s" % i
+        qty = random.randint(1,10)
+        price = round(random.random()*100,3)
+        code = "%s%s%02d" % (chr(random.randint(65,90)), chr(random.randint(65,90)),i)
+        items.append(dict(code=code, unit='u',
+                          qty=qty, price=price,
+                          amount=qty*price,
+                          ds="%s: %s" % (i,ds)))
+
+    # divide and count lines
+    lines = 0
+    li_items = []
+    for it in items:
+        qty = it['qty']
+        code = it['code']
+        unit = it['unit']
+        for ds in f.split_multicell(it['ds'], 'item_description01'):
+            # add item description line (without price nor amount)
+            li_items.append(dict(code=code, ds=ds, qty=qty, unit=unit, price=None, amount=None))
+            # clean qty and code (show only at first)
+            unit = qty = code = None
+        # set last item line price and amount
+        li_items[-1].update(amount = it['amount'],
+                            price = it['price'])
+
+    obs="\n<U>Detail:</U>\n\n" + detail
+    for ds in f.split_multicell(obs, 'item_description01'):
+        li_items.append(dict(code=code, ds=ds, qty=qty, unit=unit, price=None, amount=None))
+
+    # calculate pages:
+    lines = len(li_items)
+    max_lines_per_page = 24
+    pages = lines / (max_lines_per_page - 1)
+    if lines % (max_lines_per_page - 1): pages = pages + 1
+
+    # completo campos y hojas
+    for page in range(1, pages+1):
+        f.add_page()
+        f['page'] = 'Page %s of %s' % (page, pages)
+        if pages>1 and page<pages:
+            s = 'Continues on page %s' % (page+1)
+        else:
+            s = ''
+        f['item_description%02d' % (max_lines_per_page+1)] = s
+
+        f["company_name"] = "Sample Company"
+        f["company_logo"] = "tutorial/logo.png"
+        f["company_header1"] = "Some Address - somewhere -"
+        f["company_header2"] = "http://www.example.com"
+        f["company_footer1"] = "Tax Code ..."
+        f["company_footer2"] = "Tax/VAT ID ..."
+        f['number'] = '0001-00001234'
+        f['issue_date'] = '2010-09-10'
+        f['due_date'] = '2099-09-10'
+        f['customer_name'] = "Sample Client"
+        f['customer_address'] = "Siempreviva 1234"
+
+        # print line item...
+        li = 0
+        k = 0
+        total = Decimal("0.00")
+        for it in li_items:
+            k = k + 1
+            if k > page * (max_lines_per_page - 1):
+                break
+            if it['amount']:
+                total += Decimal("%.6f" % it['amount'])
+            if k > (page - 1) * (max_lines_per_page - 1):
+                li += 1
+                if it['qty'] is not None:
+                    f['item_quantity%02d' % li] = it['qty']
+                if it['code'] is not None:
+                    f['item_code%02d' % li] = it['code']
+                if it['unit'] is not None:
+                    f['item_unit%02d' % li] = it['unit']
+                f['item_description%02d' % li] = it['ds']
+                if it['price'] is not None:
+                    f['item_price%02d' % li] = "%0.3f" % it['price']
+                if it['amount'] is not None:
+                    f['item_amount%02d' % li] = "%0.2f" % it['amount']
+
+        if pages == page:
+            f['net'] = "%0.2f" % (total/Decimal("1.21"))
+            f['vat'] = "%0.2f" % (total*(1-1/Decimal("1.21")))
+            f['total_label'] = 'Total:'
+        else:
+            f['total_label'] = 'SubTotal:'
+        f['total'] = "%0.2f" % total
+
+    f.render("./invoice.pdf")
+    if sys.platform.startswith("linux"):
+        os.system("evince ./invoice.pdf")
+    else:
+        os.system("./invoice.pdf")
+

ADDED   gluon/contrib/pymysql/LICENSE
Index: gluon/contrib/pymysql/LICENSE
==================================================================
--- /dev/null
+++ gluon/contrib/pymysql/LICENSE
@@ -0,0 +1,19 @@
+Copyright (c) 2010 PyMySQL contributors
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.

ADDED   gluon/contrib/pymysql/README
Index: gluon/contrib/pymysql/README
==================================================================
--- /dev/null
+++ gluon/contrib/pymysql/README
@@ -0,0 +1,37 @@
+====================
+PyMySQL Installation
+====================
+
+.. contents::
+..
+   This package contains a pure-Python MySQL client library.
+   Documentation on the MySQL client/server protocol can be found here:
+   http://forge.mysql.com/wiki/MySQL_Internals_ClientServer_Protocol
+   If you would like to run the test suite, create a ~/.my.cnf file and
+   a database called "test_pymysql". The goal of pymysql is to be a drop-in
+   replacement for MySQLdb and work on CPython 2.3+, Jython, IronPython, PyPy
+   and Python 3. We test for compatibility by simply changing the import
+   statements in the Django MySQL backend and running its unit tests as well
+   as running it against the MySQLdb and myconnpy unit tests.
+
+Requirements
+-------------
+
++ Python 2.4 or higher
+
+ * http://www.python.org/
+ 
+ * 2.6 is the primary test environment.
+
+* MySQL 4.1 or higher
+    
+ * protocol41 support, experimental 4.0 support
+
+Installation
+------------
+
+# easy_install pymysql
+# ... or ...
+# python setup.py install
+
+

ADDED   gluon/contrib/pymysql/__init__.py
Index: gluon/contrib/pymysql/__init__.py
==================================================================
--- /dev/null
+++ gluon/contrib/pymysql/__init__.py
@@ -0,0 +1,131 @@
+'''
+PyMySQL: A pure-Python drop-in replacement for MySQLdb.
+
+Copyright (c) 2010 PyMySQL contributors
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
+'''
+
+VERSION = (0, 4, None)
+
+from constants import FIELD_TYPE
+from converters import escape_dict, escape_sequence, escape_string
+from err import Warning, Error, InterfaceError, DataError, \
+     DatabaseError, OperationalError, IntegrityError, InternalError, \
+     NotSupportedError, ProgrammingError
+from times import Date, Time, Timestamp, \
+    DateFromTicks, TimeFromTicks, TimestampFromTicks
+
+import sys
+
+try:
+    frozenset
+except NameError:
+    from sets import ImmutableSet as frozenset
+    try:
+        from sets import BaseSet as set
+    except ImportError:
+        from sets import Set as set
+
+threadsafety = 1
+apilevel = "2.0"
+paramstyle = "format"
+
+class DBAPISet(frozenset):
+
+
+    def __ne__(self, other):
+        if isinstance(other, set):
+            return super(DBAPISet, self).__ne__(self, other)
+        else:
+            return other not in self
+
+    def __eq__(self, other):
+        if isinstance(other, frozenset):
+            return frozenset.__eq__(self, other)
+        else:
+            return other in self
+
+    def __hash__(self):
+        return frozenset.__hash__(self)
+
+
+STRING    = DBAPISet([FIELD_TYPE.ENUM, FIELD_TYPE.STRING,
+                     FIELD_TYPE.VAR_STRING])
+BINARY    = DBAPISet([FIELD_TYPE.BLOB, FIELD_TYPE.LONG_BLOB,
+                     FIELD_TYPE.MEDIUM_BLOB, FIELD_TYPE.TINY_BLOB])
+NUMBER    = DBAPISet([FIELD_TYPE.DECIMAL, FIELD_TYPE.DOUBLE, FIELD_TYPE.FLOAT,
+                     FIELD_TYPE.INT24, FIELD_TYPE.LONG, FIELD_TYPE.LONGLONG,
+                     FIELD_TYPE.TINY, FIELD_TYPE.YEAR])
+DATE      = DBAPISet([FIELD_TYPE.DATE, FIELD_TYPE.NEWDATE])
+TIME      = DBAPISet([FIELD_TYPE.TIME])
+TIMESTAMP = DBAPISet([FIELD_TYPE.TIMESTAMP, FIELD_TYPE.DATETIME])
+DATETIME  = TIMESTAMP
+ROWID     = DBAPISet()
+
+def Binary(x):
+    """Return x as a binary type."""
+    return str(x)
+
+def Connect(*args, **kwargs):
+    """
+    Connect to the database; see connections.Connection.__init__() for
+    more information.
+    """
+    from connections import Connection
+    return Connection(*args, **kwargs)
+
+def get_client_info():  # for MySQLdb compatibility
+  return '%s.%s.%s' % VERSION
+
+connect = Connection = Connect
+
+# we include a doctored version_info here for MySQLdb compatibility
+version_info = (1,2,2,"final",0)
+
+NULL = "NULL"
+
+__version__ = get_client_info()
+
+def thread_safe():
+    return True # match MySQLdb.thread_safe()
+
+def install_as_MySQLdb():
+    """
+    After this function is called, any application that imports MySQLdb or
+    _mysql will unwittingly actually use 
+    """
+    sys.modules["MySQLdb"] = sys.modules["_mysql"] = sys.modules["pymysql"]
+
+__all__ = [
+    'BINARY', 'Binary', 'Connect', 'Connection', 'DATE', 'Date',
+    'Time', 'Timestamp', 'DateFromTicks', 'TimeFromTicks', 'TimestampFromTicks',
+    'DataError', 'DatabaseError', 'Error', 'FIELD_TYPE', 'IntegrityError',
+    'InterfaceError', 'InternalError', 'MySQLError', 'NULL', 'NUMBER',
+    'NotSupportedError', 'DBAPISet', 'OperationalError', 'ProgrammingError',
+    'ROWID', 'STRING', 'TIME', 'TIMESTAMP', 'Warning', 'apilevel', 'connect',
+    'connections', 'constants', 'converters', 'cursors', 'debug', 'escape',
+    'escape_dict', 'escape_sequence', 'escape_string', 'get_client_info',
+    'paramstyle', 'string_literal', 'threadsafety', 'version_info',
+
+    "install_as_MySQLdb",
+
+    "NULL","__version__",
+    ]

ADDED   gluon/contrib/pymysql/charset.py
Index: gluon/contrib/pymysql/charset.py
==================================================================
--- /dev/null
+++ gluon/contrib/pymysql/charset.py
@@ -0,0 +1,174 @@
+MBLENGTH = {
+        8:1,
+        33:3,
+        88:2,
+        91:2
+        }
+
+class Charset:
+    def __init__(self, id, name, collation, is_default):
+        self.id, self.name, self.collation = id, name, collation
+        self.is_default = is_default == 'Yes'
+
+class Charsets:
+    def __init__(self):
+        self._by_id = {}
+
+    def add(self, c):
+        self._by_id[c.id] = c
+
+    def by_id(self, id):
+        return self._by_id[id]
+
+    def by_name(self, name):
+        for c in self._by_id.values():
+            if c.name == name and c.is_default:
+                return c
+
+_charsets = Charsets()
+"""
+Generated with:
+
+mysql -N -s -e "select id, character_set_name, collation_name, is_default
+from information_schema.collations order by id;" | python -c "import sys
+for l in sys.stdin.readlines():
+        id, name, collation, is_default  = l.split(chr(9))
+        print '_charsets.add(Charset(%s, \'%s\', \'%s\', \'%s\'))' \
+                % (id, name, collation, is_default.strip())
+"
+
+"""
+_charsets.add(Charset(1, 'big5', 'big5_chinese_ci', 'Yes'))
+_charsets.add(Charset(2, 'latin2', 'latin2_czech_cs', ''))
+_charsets.add(Charset(3, 'dec8', 'dec8_swedish_ci', 'Yes'))
+_charsets.add(Charset(4, 'cp850', 'cp850_general_ci', 'Yes'))
+_charsets.add(Charset(5, 'latin1', 'latin1_german1_ci', ''))
+_charsets.add(Charset(6, 'hp8', 'hp8_english_ci', 'Yes'))
+_charsets.add(Charset(7, 'koi8r', 'koi8r_general_ci', 'Yes'))
+_charsets.add(Charset(8, 'latin1', 'latin1_swedish_ci', 'Yes'))
+_charsets.add(Charset(9, 'latin2', 'latin2_general_ci', 'Yes'))
+_charsets.add(Charset(10, 'swe7', 'swe7_swedish_ci', 'Yes'))
+_charsets.add(Charset(11, 'ascii', 'ascii_general_ci', 'Yes'))
+_charsets.add(Charset(12, 'ujis', 'ujis_japanese_ci', 'Yes'))
+_charsets.add(Charset(13, 'sjis', 'sjis_japanese_ci', 'Yes'))
+_charsets.add(Charset(14, 'cp1251', 'cp1251_bulgarian_ci', ''))
+_charsets.add(Charset(15, 'latin1', 'latin1_danish_ci', ''))
+_charsets.add(Charset(16, 'hebrew', 'hebrew_general_ci', 'Yes'))
+_charsets.add(Charset(18, 'tis620', 'tis620_thai_ci', 'Yes'))
+_charsets.add(Charset(19, 'euckr', 'euckr_korean_ci', 'Yes'))
+_charsets.add(Charset(20, 'latin7', 'latin7_estonian_cs', ''))
+_charsets.add(Charset(21, 'latin2', 'latin2_hungarian_ci', ''))
+_charsets.add(Charset(22, 'koi8u', 'koi8u_general_ci', 'Yes'))
+_charsets.add(Charset(23, 'cp1251', 'cp1251_ukrainian_ci', ''))
+_charsets.add(Charset(24, 'gb2312', 'gb2312_chinese_ci', 'Yes'))
+_charsets.add(Charset(25, 'greek', 'greek_general_ci', 'Yes'))
+_charsets.add(Charset(26, 'cp1250', 'cp1250_general_ci', 'Yes'))
+_charsets.add(Charset(27, 'latin2', 'latin2_croatian_ci', ''))
+_charsets.add(Charset(28, 'gbk', 'gbk_chinese_ci', 'Yes'))
+_charsets.add(Charset(29, 'cp1257', 'cp1257_lithuanian_ci', ''))
+_charsets.add(Charset(30, 'latin5', 'latin5_turkish_ci', 'Yes'))
+_charsets.add(Charset(31, 'latin1', 'latin1_german2_ci', ''))
+_charsets.add(Charset(32, 'armscii8', 'armscii8_general_ci', 'Yes'))
+_charsets.add(Charset(33, 'utf8', 'utf8_general_ci', 'Yes'))
+_charsets.add(Charset(34, 'cp1250', 'cp1250_czech_cs', ''))
+_charsets.add(Charset(35, 'ucs2', 'ucs2_general_ci', 'Yes'))
+_charsets.add(Charset(36, 'cp866', 'cp866_general_ci', 'Yes'))
+_charsets.add(Charset(37, 'keybcs2', 'keybcs2_general_ci', 'Yes'))
+_charsets.add(Charset(38, 'macce', 'macce_general_ci', 'Yes'))
+_charsets.add(Charset(39, 'macroman', 'macroman_general_ci', 'Yes'))
+_charsets.add(Charset(40, 'cp852', 'cp852_general_ci', 'Yes'))
+_charsets.add(Charset(41, 'latin7', 'latin7_general_ci', 'Yes'))
+_charsets.add(Charset(42, 'latin7', 'latin7_general_cs', ''))
+_charsets.add(Charset(43, 'macce', 'macce_bin', ''))
+_charsets.add(Charset(44, 'cp1250', 'cp1250_croatian_ci', ''))
+_charsets.add(Charset(47, 'latin1', 'latin1_bin', ''))
+_charsets.add(Charset(48, 'latin1', 'latin1_general_ci', ''))
+_charsets.add(Charset(49, 'latin1', 'latin1_general_cs', ''))
+_charsets.add(Charset(50, 'cp1251', 'cp1251_bin', ''))
+_charsets.add(Charset(51, 'cp1251', 'cp1251_general_ci', 'Yes'))
+_charsets.add(Charset(52, 'cp1251', 'cp1251_general_cs', ''))
+_charsets.add(Charset(53, 'macroman', 'macroman_bin', ''))
+_charsets.add(Charset(57, 'cp1256', 'cp1256_general_ci', 'Yes'))
+_charsets.add(Charset(58, 'cp1257', 'cp1257_bin', ''))
+_charsets.add(Charset(59, 'cp1257', 'cp1257_general_ci', 'Yes'))
+_charsets.add(Charset(63, 'binary', 'binary', 'Yes'))
+_charsets.add(Charset(64, 'armscii8', 'armscii8_bin', ''))
+_charsets.add(Charset(65, 'ascii', 'ascii_bin', ''))
+_charsets.add(Charset(66, 'cp1250', 'cp1250_bin', ''))
+_charsets.add(Charset(67, 'cp1256', 'cp1256_bin', ''))
+_charsets.add(Charset(68, 'cp866', 'cp866_bin', ''))
+_charsets.add(Charset(69, 'dec8', 'dec8_bin', ''))
+_charsets.add(Charset(70, 'greek', 'greek_bin', ''))
+_charsets.add(Charset(71, 'hebrew', 'hebrew_bin', ''))
+_charsets.add(Charset(72, 'hp8', 'hp8_bin', ''))
+_charsets.add(Charset(73, 'keybcs2', 'keybcs2_bin', ''))
+_charsets.add(Charset(74, 'koi8r', 'koi8r_bin', ''))
+_charsets.add(Charset(75, 'koi8u', 'koi8u_bin', ''))
+_charsets.add(Charset(77, 'latin2', 'latin2_bin', ''))
+_charsets.add(Charset(78, 'latin5', 'latin5_bin', ''))
+_charsets.add(Charset(79, 'latin7', 'latin7_bin', ''))
+_charsets.add(Charset(80, 'cp850', 'cp850_bin', ''))
+_charsets.add(Charset(81, 'cp852', 'cp852_bin', ''))
+_charsets.add(Charset(82, 'swe7', 'swe7_bin', ''))
+_charsets.add(Charset(83, 'utf8', 'utf8_bin', ''))
+_charsets.add(Charset(84, 'big5', 'big5_bin', ''))
+_charsets.add(Charset(85, 'euckr', 'euckr_bin', ''))
+_charsets.add(Charset(86, 'gb2312', 'gb2312_bin', ''))
+_charsets.add(Charset(87, 'gbk', 'gbk_bin', ''))
+_charsets.add(Charset(88, 'sjis', 'sjis_bin', ''))
+_charsets.add(Charset(89, 'tis620', 'tis620_bin', ''))
+_charsets.add(Charset(90, 'ucs2', 'ucs2_bin', ''))
+_charsets.add(Charset(91, 'ujis', 'ujis_bin', ''))
+_charsets.add(Charset(92, 'geostd8', 'geostd8_general_ci', 'Yes'))
+_charsets.add(Charset(93, 'geostd8', 'geostd8_bin', ''))
+_charsets.add(Charset(94, 'latin1', 'latin1_spanish_ci', ''))
+_charsets.add(Charset(95, 'cp932', 'cp932_japanese_ci', 'Yes'))
+_charsets.add(Charset(96, 'cp932', 'cp932_bin', ''))
+_charsets.add(Charset(97, 'eucjpms', 'eucjpms_japanese_ci', 'Yes'))
+_charsets.add(Charset(98, 'eucjpms', 'eucjpms_bin', ''))
+_charsets.add(Charset(99, 'cp1250', 'cp1250_polish_ci', ''))
+_charsets.add(Charset(128, 'ucs2', 'ucs2_unicode_ci', ''))
+_charsets.add(Charset(129, 'ucs2', 'ucs2_icelandic_ci', ''))
+_charsets.add(Charset(130, 'ucs2', 'ucs2_latvian_ci', ''))
+_charsets.add(Charset(131, 'ucs2', 'ucs2_romanian_ci', ''))
+_charsets.add(Charset(132, 'ucs2', 'ucs2_slovenian_ci', ''))
+_charsets.add(Charset(133, 'ucs2', 'ucs2_polish_ci', ''))
+_charsets.add(Charset(134, 'ucs2', 'ucs2_estonian_ci', ''))
+_charsets.add(Charset(135, 'ucs2', 'ucs2_spanish_ci', ''))
+_charsets.add(Charset(136, 'ucs2', 'ucs2_swedish_ci', ''))
+_charsets.add(Charset(137, 'ucs2', 'ucs2_turkish_ci', ''))
+_charsets.add(Charset(138, 'ucs2', 'ucs2_czech_ci', ''))
+_charsets.add(Charset(139, 'ucs2', 'ucs2_danish_ci', ''))
+_charsets.add(Charset(140, 'ucs2', 'ucs2_lithuanian_ci', ''))
+_charsets.add(Charset(141, 'ucs2', 'ucs2_slovak_ci', ''))
+_charsets.add(Charset(142, 'ucs2', 'ucs2_spanish2_ci', ''))
+_charsets.add(Charset(143, 'ucs2', 'ucs2_roman_ci', ''))
+_charsets.add(Charset(144, 'ucs2', 'ucs2_persian_ci', ''))
+_charsets.add(Charset(145, 'ucs2', 'ucs2_esperanto_ci', ''))
+_charsets.add(Charset(146, 'ucs2', 'ucs2_hungarian_ci', ''))
+_charsets.add(Charset(192, 'utf8', 'utf8_unicode_ci', ''))
+_charsets.add(Charset(193, 'utf8', 'utf8_icelandic_ci', ''))
+_charsets.add(Charset(194, 'utf8', 'utf8_latvian_ci', ''))
+_charsets.add(Charset(195, 'utf8', 'utf8_romanian_ci', ''))
+_charsets.add(Charset(196, 'utf8', 'utf8_slovenian_ci', ''))
+_charsets.add(Charset(197, 'utf8', 'utf8_polish_ci', ''))
+_charsets.add(Charset(198, 'utf8', 'utf8_estonian_ci', ''))
+_charsets.add(Charset(199, 'utf8', 'utf8_spanish_ci', ''))
+_charsets.add(Charset(200, 'utf8', 'utf8_swedish_ci', ''))
+_charsets.add(Charset(201, 'utf8', 'utf8_turkish_ci', ''))
+_charsets.add(Charset(202, 'utf8', 'utf8_czech_ci', ''))
+_charsets.add(Charset(203, 'utf8', 'utf8_danish_ci', ''))
+_charsets.add(Charset(204, 'utf8', 'utf8_lithuanian_ci', ''))
+_charsets.add(Charset(205, 'utf8', 'utf8_slovak_ci', ''))
+_charsets.add(Charset(206, 'utf8', 'utf8_spanish2_ci', ''))
+_charsets.add(Charset(207, 'utf8', 'utf8_roman_ci', ''))
+_charsets.add(Charset(208, 'utf8', 'utf8_persian_ci', ''))
+_charsets.add(Charset(209, 'utf8', 'utf8_esperanto_ci', ''))
+_charsets.add(Charset(210, 'utf8', 'utf8_hungarian_ci', ''))
+
+def charset_by_name(name):
+    return _charsets.by_name(name)
+
+def charset_by_id(id):
+    return _charsets.by_id(id)
+

ADDED   gluon/contrib/pymysql/connections.py
Index: gluon/contrib/pymysql/connections.py
==================================================================
--- /dev/null
+++ gluon/contrib/pymysql/connections.py
@@ -0,0 +1,932 @@
+# Python implementation of the MySQL client-server protocol
+#   http://forge.mysql.com/wiki/MySQL_Internals_ClientServer_Protocol
+
+try:
+    import hashlib
+    sha_new = lambda *args, **kwargs: hashlib.new("sha1", *args, **kwargs)
+except ImportError:
+    import sha
+    sha_new = sha.new
+
+import socket
+try:
+    import ssl
+    SSL_ENABLED = True
+except ImportError:
+    SSL_ENABLED = False
+
+import struct
+import sys
+import os
+import ConfigParser
+
+try:
+    import cStringIO as StringIO
+except ImportError:
+    import StringIO
+
+from charset import MBLENGTH, charset_by_name, charset_by_id
+from cursors import Cursor
+from constants import FIELD_TYPE, FLAG
+from constants import SERVER_STATUS
+from constants.CLIENT import *
+from constants.COMMAND import *
+from util import join_bytes, byte2int, int2byte
+from converters import escape_item, encoders, decoders
+from err import raise_mysql_exception, Warning, Error, \
+     InterfaceError, DataError, DatabaseError, OperationalError, \
+     IntegrityError, InternalError, NotSupportedError, ProgrammingError
+
+DEBUG = False
+
+NULL_COLUMN = 251
+UNSIGNED_CHAR_COLUMN = 251
+UNSIGNED_SHORT_COLUMN = 252
+UNSIGNED_INT24_COLUMN = 253
+UNSIGNED_INT64_COLUMN = 254
+UNSIGNED_CHAR_LENGTH = 1
+UNSIGNED_SHORT_LENGTH = 2
+UNSIGNED_INT24_LENGTH = 3
+UNSIGNED_INT64_LENGTH = 8
+
+DEFAULT_CHARSET = 'latin1'
+MAX_PACKET_LENGTH = 256*256*256-1
+
+
+def dump_packet(data):
+    
+    def is_ascii(data):
+        if byte2int(data) >= 65 and byte2int(data) <= 122: #data.isalnum():
+            return data
+        return '.'
+    print "packet length %d" % len(data)
+    print "method call[1]: %s" % sys._getframe(1).f_code.co_name
+    print "method call[2]: %s" % sys._getframe(2).f_code.co_name
+    print "method call[3]: %s" % sys._getframe(3).f_code.co_name
+    print "method call[4]: %s" % sys._getframe(4).f_code.co_name
+    print "method call[5]: %s" % sys._getframe(5).f_code.co_name
+    print "-" * 88
+    dump_data = [data[i:i+16] for i in xrange(len(data)) if i%16 == 0]
+    for d in dump_data:
+        print ' '.join(map(lambda x:"%02X" % byte2int(x), d)) + \
+                '   ' * (16 - len(d)) + ' ' * 2 + \
+                ' '.join(map(lambda x:"%s" % is_ascii(x), d))
+    print "-" * 88
+    print ""
+
+def _scramble(password, message):
+    if password == None or len(password) == 0:
+        return int2byte(0)
+    if DEBUG: print 'password=' + password
+    stage1 = sha_new(password).digest()
+    stage2 = sha_new(stage1).digest()
+    s = sha_new()
+    s.update(message)
+    s.update(stage2)
+    result = s.digest()
+    return _my_crypt(result, stage1)
+
+def _my_crypt(message1, message2):
+    length = len(message1)
+    result = struct.pack('B', length)
+    for i in xrange(length):
+        x = (struct.unpack('B', message1[i:i+1])[0] ^ \
+             struct.unpack('B', message2[i:i+1])[0])
+        result += struct.pack('B', x)
+    return result
+
+# old_passwords support ported from libmysql/password.c
+SCRAMBLE_LENGTH_323 = 8
+
+class RandStruct_323(object):
+    def __init__(self, seed1, seed2):
+        self.max_value = 0x3FFFFFFFL
+        self.seed1 = seed1 % self.max_value
+        self.seed2 = seed2 % self.max_value
+
+    def my_rnd(self):
+        self.seed1 = (self.seed1 * 3L + self.seed2) % self.max_value
+        self.seed2 = (self.seed1 + self.seed2 + 33L) % self.max_value
+        return float(self.seed1) / float(self.max_value)
+
+def _scramble_323(password, message):
+    hash_pass = _hash_password_323(password)
+    hash_message = _hash_password_323(message[:SCRAMBLE_LENGTH_323])
+    hash_pass_n = struct.unpack(">LL", hash_pass)
+    hash_message_n = struct.unpack(">LL", hash_message)
+
+    rand_st = RandStruct_323(hash_pass_n[0] ^ hash_message_n[0],
+                             hash_pass_n[1] ^ hash_message_n[1])
+    outbuf = StringIO.StringIO()
+    for _ in xrange(min(SCRAMBLE_LENGTH_323, len(message))):
+        outbuf.write(int2byte(int(rand_st.my_rnd() * 31) + 64))
+    extra = int2byte(int(rand_st.my_rnd() * 31))
+    out = outbuf.getvalue()
+    outbuf = StringIO.StringIO()
+    for c in out:
+        outbuf.write(int2byte(byte2int(c) ^ byte2int(extra)))
+    return outbuf.getvalue()
+
+def _hash_password_323(password):
+    nr = 1345345333L
+    add = 7L
+    nr2 = 0x12345671L
+
+    for c in [byte2int(x) for x in password if x not in (' ', '\t')]:
+        nr^= (((nr & 63)+add)*c)+ (nr << 8) & 0xFFFFFFFF
+        nr2= (nr2 + ((nr2 << 8) ^ nr)) & 0xFFFFFFFF
+        add= (add + c) & 0xFFFFFFFF
+
+    r1 = nr & ((1L << 31) - 1L) # kill sign bits
+    r2 = nr2 & ((1L << 31) - 1L)
+
+    # pack
+    return struct.pack(">LL", r1, r2)
+
+def pack_int24(n):
+    return struct.pack('BBB', n&0xFF, (n>>8)&0xFF, (n>>16)&0xFF)
+
+def unpack_uint16(n):
+  return struct.unpack('<H', n[0:2])[0]
+
+
+# TODO: stop using bit-shifting in these functions...
+# TODO: rename to "uint" to make it clear they're unsigned...
+def unpack_int24(n):
+    return struct.unpack('B',n[0])[0] + (struct.unpack('B', n[1])[0] << 8) +\
+        (struct.unpack('B',n[2])[0] << 16)
+
+def unpack_int32(n):
+    return struct.unpack('B',n[0])[0] + (struct.unpack('B', n[1])[0] << 8) +\
+        (struct.unpack('B',n[2])[0] << 16) + (struct.unpack('B', n[3])[0] << 24)
+
+def unpack_int64(n):
+    return struct.unpack('B',n[0])[0] + (struct.unpack('B', n[1])[0]<<8) +\
+    (struct.unpack('B',n[2])[0] << 16) + (struct.unpack('B',n[3])[0]<<24)+\
+    (struct.unpack('B',n[4])[0] << 32) + (struct.unpack('B',n[5])[0]<<40)+\
+    (struct.unpack('B',n[6])[0] << 48) + (struct.unpack('B',n[7])[0]<<56)
+
+def defaulterrorhandler(connection, cursor, errorclass, errorvalue):
+    err = errorclass, errorvalue
+    if DEBUG:
+        raise
+
+    if cursor:
+        cursor.messages.append(err)
+    else:
+        connection.messages.append(err)
+    del cursor
+    del connection
+
+    if not issubclass(errorclass, Error):
+        raise Error(errorclass, errorvalue)
+    else:
+        raise errorclass, errorvalue
+
+
+class MysqlPacket(object):
+  """Representation of a MySQL response packet.  Reads in the packet
+  from the network socket, removes packet header and provides an interface
+  for reading/parsing the packet results."""
+
+  def __init__(self, socket):
+    self.__position = 0
+    self.__recv_packet(socket)
+    del socket
+
+  def __recv_packet(self, socket):
+    """Parse the packet header and read entire packet payload into buffer."""
+    packet_header = socket.recv(4)
+    while len(packet_header) < 4:
+        d = socket.recv(4 - len(packet_header))
+        if len(d) == 0:
+            raise OperationalError(2013, "Lost connection to MySQL server during query")
+        packet_header += d
+
+    if DEBUG: dump_packet(packet_header)
+    packet_length_bin = packet_header[:3]
+    self.__packet_number = byte2int(packet_header[3])
+    # TODO: check packet_num is correct (+1 from last packet)
+
+    bin_length = packet_length_bin + int2byte(0)  # pad little-endian number
+    bytes_to_read = struct.unpack('<I', bin_length)[0]
+
+    payload_buff = []  # this is faster than cStringIO
+    while bytes_to_read > 0:
+      recv_data = socket.recv(bytes_to_read)
+      if len(recv_data) == 0:
+            raise OperationalError(2013, "Lost connection to MySQL server during query")
+      if DEBUG: dump_packet(recv_data)
+      payload_buff.append(recv_data)
+      bytes_to_read -= len(recv_data)
+    self.__data = join_bytes(payload_buff)
+
+  def packet_number(self): return self.__packet_number
+
+  def get_all_data(self): return self.__data
+
+  def read(self, size):
+    """Read the first 'size' bytes in packet and advance cursor past them."""
+    result = self.peek(size)
+    self.advance(size)
+    return result
+
+  def read_all(self):
+    """Read all remaining data in the packet.
+
+    (Subsequent read() or peek() will return errors.)
+    """
+    result = self.__data[self.__position:]
+    self.__position = None  # ensure no subsequent read() or peek()
+    return result
+
+  def advance(self, length):
+    """Advance the cursor in data buffer 'length' bytes."""
+    new_position = self.__position + length
+    if new_position < 0 or new_position > len(self.__data):
+      raise Exception('Invalid advance amount (%s) for cursor.  '
+                      'Position=%s' % (length, new_position))
+    self.__position = new_position
+
+  def rewind(self, position=0):
+    """Set the position of the data buffer cursor to 'position'."""
+    if position < 0 or position > len(self.__data):
+      raise Exception("Invalid position to rewind cursor to: %s." % position)
+    self.__position = position
+
+  def peek(self, size):
+    """Look at the first 'size' bytes in packet without moving cursor."""
+    result = self.__data[self.__position:(self.__position+size)]
+    if len(result) != size:
+      error = ('Result length not requested length:\n'
+               'Expected=%s.  Actual=%s.  Position: %s.  Data Length: %s'
+               % (size, len(result), self.__position, len(self.__data)))
+      if DEBUG:
+        print error
+        self.dump()
+      raise AssertionError(error)
+    return result
+
+  def get_bytes(self, position, length=1):
+    """Get 'length' bytes starting at 'position'.
+
+    Position is start of payload (first four packet header bytes are not
+    included) starting at index '0'.
+
+    No error checking is done.  If requesting outside end of buffer
+    an empty string (or string shorter than 'length') may be returned!
+    """
+    return self.__data[position:(position+length)]
+
+  def read_length_coded_binary(self):
+    """Read a 'Length Coded Binary' number from the data buffer.
+
+    Length coded numbers can be anywhere from 1 to 9 bytes depending
+    on the value of the first byte.
+    """
+    c = byte2int(self.read(1))
+    if c == NULL_COLUMN:
+      return None
+    if c < UNSIGNED_CHAR_COLUMN:
+      return c
+    elif c == UNSIGNED_SHORT_COLUMN:
+      return unpack_uint16(self.read(UNSIGNED_SHORT_LENGTH))
+    elif c == UNSIGNED_INT24_COLUMN:
+      return unpack_int24(self.read(UNSIGNED_INT24_LENGTH))
+    elif c == UNSIGNED_INT64_COLUMN:
+      # TODO: what was 'longlong'?  confirm it wasn't used?
+      return unpack_int64(self.read(UNSIGNED_INT64_LENGTH))
+
+  def read_length_coded_string(self):
+    """Read a 'Length Coded String' from the data buffer.
+
+    A 'Length Coded String' consists first of a length coded
+    (unsigned, positive) integer represented in 1-9 bytes followed by
+    that many bytes of binary data.  (For example "cat" would be "3cat".)
+    """
+    length = self.read_length_coded_binary()
+    if length is None:
+        return None
+    return self.read(length)
+
+  def is_ok_packet(self):
+    return byte2int(self.get_bytes(0)) == 0
+
+  def is_eof_packet(self):
+    return byte2int(self.get_bytes(0)) == 254  # 'fe'
+
+  def is_resultset_packet(self):
+    field_count = byte2int(self.get_bytes(0))
+    return field_count >= 1 and field_count <= 250
+
+  def is_error_packet(self):
+    return byte2int(self.get_bytes(0)) == 255
+
+  def check_error(self):
+    if self.is_error_packet():
+      self.rewind()
+      self.advance(1)  # field_count == error (we already know that)
+      errno = unpack_uint16(self.read(2))
+      if DEBUG: print "errno = %d" % errno
+      raise_mysql_exception(self.__data)
+
+  def dump(self):
+    dump_packet(self.__data)
+
+
+class FieldDescriptorPacket(MysqlPacket):
+  """A MysqlPacket that represents a specific column's metadata in the result.
+
+  Parsing is automatically done and the results are exported via public
+  attributes on the class such as: db, table_name, name, length, type_code.
+  """
+
+  def __init__(self, *args):
+    MysqlPacket.__init__(self, *args)
+    self.__parse_field_descriptor()
+
+  def __parse_field_descriptor(self):
+    """Parse the 'Field Descriptor' (Metadata) packet.
+
+    This is compatible with MySQL 4.1+ (not compatible with MySQL 4.0).
+    """
+    self.catalog = self.read_length_coded_string()
+    self.db = self.read_length_coded_string()
+    self.table_name = self.read_length_coded_string()
+    self.org_table = self.read_length_coded_string()
+    self.name = self.read_length_coded_string()
+    self.org_name = self.read_length_coded_string()
+    self.advance(1)  # non-null filler
+    self.charsetnr = struct.unpack('<H', self.read(2))[0]
+    self.length = struct.unpack('<I', self.read(4))[0]
+    self.type_code = byte2int(self.read(1))
+    self.flags = struct.unpack('<H', self.read(2))[0]
+    self.scale = byte2int(self.read(1))  # "decimals"
+    self.advance(2)  # filler (always 0x00)
+
+    # 'default' is a length coded binary and is still in the buffer?
+    # not used for normal result sets...
+
+  def description(self):
+    """Provides a 7-item tuple compatible with the Python PEP249 DB Spec."""
+    desc = []
+    desc.append(self.name)
+    desc.append(self.type_code)
+    desc.append(None) # TODO: display_length; should this be self.length?
+    desc.append(self.get_column_length()) # 'internal_size'
+    desc.append(self.get_column_length()) # 'precision'  # TODO: why!?!?
+    desc.append(self.scale)
+
+    # 'null_ok' -- can this be True/False rather than 1/0?
+    #              if so just do:  desc.append(bool(self.flags % 2 == 0))
+    if self.flags % 2 == 0:
+      desc.append(1)
+    else:
+      desc.append(0)
+    return tuple(desc)
+
+  def get_column_length(self):
+    if self.type_code == FIELD_TYPE.VAR_STRING:
+      mblen = MBLENGTH.get(self.charsetnr, 1)
+      return self.length // mblen
+    return self.length
+
+  def __str__(self):
+    return ('%s %s.%s.%s, type=%s'
+            % (self.__class__, self.db, self.table_name, self.name,
+               self.type_code))
+
+
+class Connection(object):
+    """
+    Representation of a socket with a mysql server.
+
+    The proper way to get an instance of this class is to call
+    connect()."""
+    errorhandler = defaulterrorhandler
+
+    def __init__(self, host="localhost", user=None, passwd="",
+                 db=None, port=3306, unix_socket=None,
+                 charset='', sql_mode=None,
+                 read_default_file=None, conv=decoders, use_unicode=None,
+                 client_flag=0, cursorclass=Cursor, init_command=None,
+                 connect_timeout=None, ssl=None, read_default_group=None,
+                 compress=None, named_pipe=None):
+        """
+        Establish a connection to the MySQL database. Accepts several
+        arguments:
+
+        host: Host where the database server is located
+        user: Username to log in as
+        passwd: Password to use.
+        db: Database to use, None to not use a particular one.
+        port: MySQL port to use, default is usually OK.
+        unix_socket: Optionally, you can use a unix socket rather than TCP/IP.
+        charset: Charset you want to use.
+        sql_mode: Default SQL_MODE to use.
+        read_default_file: Specifies  my.cnf file to read these parameters from under the [client] section.
+        conv: Decoders dictionary to use instead of the default one. This is used to provide custom marshalling of types. See converters.
+        use_unicode: Whether or not to default to unicode strings. This option defaults to true for Py3k.
+        client_flag: Custom flags to send to MySQL. Find potential values in constants.CLIENT.
+        cursorclass: Custom cursor class to use.
+        init_command: Initial SQL statement to run when connection is established.
+        connect_timeout: Timeout before throwing an exception when connecting.
+        ssl: A dict of arguments similar to mysql_ssl_set()'s parameters. For now the capath and cipher arguments are not supported.
+        read_default_group: Group to read from in the configuration file.
+        compress; Not supported
+        named_pipe: Not supported
+        """
+
+        if use_unicode is None and sys.version_info[0] > 2:
+            use_unicode = True
+
+        if compress or named_pipe:
+            raise NotImplementedError, "compress and named_pipe arguments are not supported"
+
+        if ssl and (ssl.has_key('capath') or ssl.has_key('cipher')):
+            raise NotImplementedError, 'ssl options capath and cipher are not supported'
+
+        self.ssl = False
+        if ssl:
+            if not SSL_ENABLED:
+                raise NotImplementedError, "ssl module not found"
+            self.ssl = True
+            client_flag |= SSL
+            for k in ('key', 'cert', 'ca'):
+                v = None
+                if ssl.has_key(k):
+                    v = ssl[k]
+                setattr(self, k, v)
+
+        if read_default_group and not read_default_file:
+            if sys.platform.startswith("win"):
+                read_default_file = "c:\\my.ini"
+            else:
+                read_default_file = "/etc/my.cnf"
+
+        if read_default_file:
+            if not read_default_group:
+                read_default_group = "client"
+
+            cfg = ConfigParser.RawConfigParser()
+            cfg.read(os.path.expanduser(read_default_file))
+
+            def _config(key, default):
+                try:
+                    return cfg.get(read_default_group,key)
+                except:
+                    return default
+
+            user = _config("user",user)
+            passwd = _config("password",passwd)
+            host = _config("host", host)
+            db = _config("db",db)
+            unix_socket = _config("socket",unix_socket)
+            port = _config("port", port)
+            charset = _config("default-character-set", charset)
+
+        self.host = host
+        self.port = port
+        self.user = user
+        self.password = passwd
+        self.db = db
+        self.unix_socket = unix_socket
+        if charset:
+            self.charset = charset
+            self.use_unicode = True
+        else:
+            self.charset = DEFAULT_CHARSET
+            self.use_unicode = False
+
+        if use_unicode:
+            self.use_unicode = use_unicode
+
+        client_flag |= CAPABILITIES
+        client_flag |= MULTI_STATEMENTS
+        if self.db:
+            client_flag |= CONNECT_WITH_DB
+        self.client_flag = client_flag
+
+        self.cursorclass = cursorclass
+        self.connect_timeout = connect_timeout
+
+        self._connect()
+
+        self.messages = []
+        self.set_charset(charset)
+        self.encoders = encoders
+        self.decoders = conv
+
+        self._affected_rows = 0
+        self.host_info = "Not connected"
+
+        self.autocommit(False)
+
+        if sql_mode is not None:
+            c = self.cursor()
+            c.execute("SET sql_mode=%s", (sql_mode,))
+
+        self.commit()
+
+        if init_command is not None:
+            c = self.cursor()
+            c.execute(init_command)
+
+            self.commit()
+
+
+    def close(self):
+        ''' Send the quit message and close the socket '''
+        send_data = struct.pack('<i',1) + int2byte(COM_QUIT)
+        self.socket.send(send_data)
+        self.socket.close()
+        self.socket = None
+
+    def autocommit(self, value):
+        ''' Set whether or not to commit after every execute() '''
+        try:
+            self._execute_command(COM_QUERY, "SET AUTOCOMMIT = %s" % \
+                                      self.escape(value))
+            self.read_packet()
+        except:
+            exc,value,tb = sys.exc_info()
+            self.errorhandler(None, exc, value)
+
+    def commit(self):
+        ''' Commit changes to stable storage '''
+        try:
+            self._execute_command(COM_QUERY, "COMMIT")
+            self.read_packet()
+        except:
+            exc,value,tb = sys.exc_info()
+            self.errorhandler(None, exc, value)
+
+    def rollback(self):
+        ''' Roll back the current transaction '''
+        try:
+            self._execute_command(COM_QUERY, "ROLLBACK")
+            self.read_packet()
+        except:
+            exc,value,tb = sys.exc_info()
+            self.errorhandler(None, exc, value)
+
+    def escape(self, obj):
+        ''' Escape whatever value you pass to it  '''
+        return escape_item(obj, self.charset)
+
+    def literal(self, obj):
+        ''' Alias for escape() '''
+        return escape_item(obj, self.charset)
+
+    def cursor(self):
+        ''' Create a new cursor to execute queries with '''
+        return self.cursorclass(self)
+
+    def __enter__(self):
+        ''' Context manager that returns a Cursor '''
+        return self.cursor()
+
+    def __exit__(self, exc, value, traceback):
+        ''' On successful exit, commit. On exception, rollback. '''
+        if exc:
+            self.rollback()
+        else:
+            self.commit()
+
+    # The following methods are INTERNAL USE ONLY (called from Cursor)
+    def query(self, sql):
+        self._execute_command(COM_QUERY, sql)
+        self._affected_rows = self._read_query_result()
+        return self._affected_rows
+
+    def next_result(self):
+        self._affected_rows = self._read_query_result()
+        return self._affected_rows
+
+    def affected_rows(self):
+        return self._affected_rows
+
+    def kill(self, thread_id):
+        arg = struct.pack('<I', thread_id)
+        try:
+            self._execute_command(COM_PROCESS_KILL, arg)
+        except:
+            exc,value,tb = sys.exc_info()
+            self.errorhandler(None, exc, value)
+            return
+        pkt = self.read_packet()
+        return pkt.is_ok_packet()
+
+    def ping(self, reconnect=True):
+        ''' Check if the server is alive '''
+        try:
+            self._execute_command(COM_PING, "")
+        except:
+            if reconnect:
+                self._connect()
+                return self.ping(False)
+            else:
+                exc,value,tb = sys.exc_info()
+                self.errorhandler(None, exc, value)
+                return
+
+        pkt = self.read_packet()
+        return pkt.is_ok_packet()
+
+    def set_charset(self, charset):
+        try:
+            if charset:
+                self._execute_command(COM_QUERY, "SET NAMES %s" %
+                                      self.escape(charset))
+                self.read_packet()
+                self.charset = charset
+        except:
+            exc,value,tb = sys.exc_info()
+            self.errorhandler(None, exc, value)
+
+    def _connect(self):
+        try:
+            if self.unix_socket and (self.host == 'localhost' or self.host == '127.0.0.1'):
+                sock = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
+                t = sock.gettimeout()
+                sock.settimeout(self.connect_timeout)
+                sock.connect(self.unix_socket)
+                sock.settimeout(t)
+                self.host_info = "Localhost via UNIX socket"
+                if DEBUG: print 'connected using unix_socket'
+            else:
+                sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+                t = sock.gettimeout()
+                sock.settimeout(self.connect_timeout)
+                sock.connect((self.host, self.port))
+                sock.settimeout(t)
+                self.host_info = "socket %s:%d" % (self.host, self.port)
+                if DEBUG: print 'connected using socket'
+            self.socket = sock
+            self._get_server_information()
+            self._request_authentication()
+        except socket.error, e:
+            raise OperationalError(2003, "Can't connect to MySQL server on %r (%d)" % (self.host, e.args[0]))
+
+    def read_packet(self, packet_type=MysqlPacket):
+      """Read an entire "mysql packet" in its entirety from the network
+      and return a MysqlPacket type that represents the results."""
+
+      # TODO: is socket.recv(small_number) significantly slower than
+      #       socket.recv(large_number)?  if so, maybe we should buffer
+      #       the socket.recv() (though that obviously makes memory management
+      #       more complicated.
+      packet = packet_type(self.socket)
+      packet.check_error()
+      return packet
+
+    def _read_query_result(self):
+        result = MySQLResult(self)
+        result.read()
+        self._result = result
+        return result.affected_rows
+
+    def _send_command(self, command, sql):
+        #send_data = struct.pack('<i', len(sql) + 1) + command + sql
+        # could probably be more efficient, at least it's correct
+        if not self.socket:
+            self.errorhandler(None, InterfaceError, "(0, '')")
+
+        if isinstance(sql, unicode):
+            sql = sql.encode(self.charset)
+
+        buf = int2byte(command) + sql
+        pckt_no = 0
+        while len(buf) >= MAX_PACKET_LENGTH:
+            header = struct.pack('<i', MAX_PACKET_LENGTH)[:-1]+int2byte(pckt_no)
+            send_data = header + buf[:MAX_PACKET_LENGTH]
+            self.socket.send(send_data)
+            if DEBUG: dump_packet(send_data)
+            buf = buf[MAX_PACKET_LENGTH:]
+            pckt_no += 1
+        header = struct.pack('<i', len(buf))[:-1]+int2byte(pckt_no)
+        self.socket.send(header+buf)
+
+
+        #sock = self.socket
+        #sock.send(send_data)
+
+        #
+
+    def _execute_command(self, command, sql):
+        self._send_command(command, sql)
+        
+    def _request_authentication(self):
+        self._send_authentication()
+
+    def _send_authentication(self):
+        sock = self.socket
+        self.client_flag |= CAPABILITIES
+        if self.server_version.startswith('5'):
+            self.client_flag |= MULTI_RESULTS
+
+        if self.user is None:
+            raise ValueError, "Did not specify a username"
+
+        charset_id = charset_by_name(self.charset).id
+        self.user = self.user.encode(self.charset)
+
+        data_init = struct.pack('<i', self.client_flag) + struct.pack("<I", 1) + \
+                     int2byte(charset_id) + int2byte(0)*23
+
+        next_packet = 1
+
+        if self.ssl:
+            data = pack_int24(len(data_init)) + int2byte(next_packet) + data_init
+            next_packet += 1
+
+            if DEBUG: dump_packet(data)
+
+            sock.send(data)
+            sock = self.socket = ssl.wrap_socket(sock, keyfile=self.key,
+                                           certfile=self.cert,
+                                           ssl_version=ssl.PROTOCOL_TLSv1,
+                                           cert_reqs=ssl.CERT_REQUIRED,
+                                           ca_certs=self.ca)
+
+        data = data_init + self.user+int2byte(0) + _scramble(self.password.encode(self.charset), self.salt)
+
+        if self.db:
+            self.db = self.db.encode(self.charset)
+            data += self.db + int2byte(0)
+
+        data = pack_int24(len(data)) + int2byte(next_packet) + data
+        next_packet += 2
+
+        if DEBUG: dump_packet(data)
+
+        sock.send(data)
+
+        auth_packet = MysqlPacket(sock)
+        auth_packet.check_error()
+        if DEBUG: auth_packet.dump()
+
+        # if old_passwords is enabled the packet will be 1 byte long and
+        # have the octet 254
+
+        if auth_packet.is_eof_packet():
+            # send legacy handshake
+            #raise NotImplementedError, "old_passwords are not supported. Check to see if mysqld was started with --old-passwords, if old-passwords=1 in a my.cnf file, or if there are some short hashes in your mysql.user table."
+            # TODO: is this the correct charset?
+            data = _scramble_323(self.password.encode(self.charset), self.salt.encode(self.charset)) + int2byte(0)
+            data = pack_int24(len(data)) + int2byte(next_packet) + data
+
+            sock.send(data)
+            auth_packet = MysqlPacket(sock)
+            auth_packet.check_error()
+            if DEBUG: auth_packet.dump()
+
+
+    # _mysql support
+    def thread_id(self):
+        return self.server_thread_id[0]
+
+    def character_set_name(self):
+        return self.charset
+
+    def get_host_info(self):
+        return self.host_info
+
+    def get_proto_info(self):
+        return self.protocol_version
+
+    def _get_server_information(self):
+        sock = self.socket
+        i = 0
+        packet = MysqlPacket(sock)
+        data = packet.get_all_data()
+
+        if DEBUG: dump_packet(data)
+        #packet_len = byte2int(data[i:i+1])
+        #i += 4
+        self.protocol_version = byte2int(data[i:i+1])
+
+        i += 1
+        server_end = data.find(int2byte(0), i)
+        # TODO: is this the correct charset? should it be default_charset?
+        self.server_version = data[i:server_end].decode(self.charset)
+
+        i = server_end + 1
+        self.server_thread_id = struct.unpack('<h', data[i:i+2])
+
+        i += 4
+        self.salt = data[i:i+8]
+
+        i += 9
+        if len(data) >= i + 1:
+            i += 1
+
+        self.server_capabilities = struct.unpack('<h', data[i:i+2])[0]
+
+        i += 1
+        self.server_language = byte2int(data[i:i+1])
+        self.server_charset = charset_by_id(self.server_language).name
+
+        i += 16
+        if len(data) >= i+12-1:
+            rest_salt = data[i:i+12]
+            self.salt += rest_salt
+
+    def get_server_info(self):
+        return self.server_version
+
+    Warning = Warning
+    Error = Error
+    InterfaceError = InterfaceError
+    DatabaseError = DatabaseError
+    DataError = DataError
+    OperationalError = OperationalError
+    IntegrityError = IntegrityError
+    InternalError = InternalError
+    ProgrammingError = ProgrammingError
+    NotSupportedError = NotSupportedError
+
+# TODO: move OK and EOF packet parsing/logic into a proper subclass
+#       of MysqlPacket like has been done with FieldDescriptorPacket.
+class MySQLResult(object):
+
+    def __init__(self, connection):
+        from weakref import proxy
+        self.connection = proxy(connection)
+        self.affected_rows = None
+        self.insert_id = None
+        self.server_status = 0
+        self.warning_count = 0
+        self.message = None
+        self.field_count = 0
+        self.description = None
+        self.rows = None
+        self.has_next = None
+
+    def read(self):
+        self.first_packet = self.connection.read_packet()
+
+        # TODO: use classes for different packet types?
+        if self.first_packet.is_ok_packet():
+            self._read_ok_packet()
+        else:
+            self._read_result_packet()
+
+    def _read_ok_packet(self):
+        self.first_packet.advance(1)  # field_count (always '0')
+        self.affected_rows = self.first_packet.read_length_coded_binary()
+        self.insert_id = self.first_packet.read_length_coded_binary()
+        self.server_status = struct.unpack('<H', self.first_packet.read(2))[0]
+        self.warning_count = struct.unpack('<H', self.first_packet.read(2))[0]
+        self.message = self.first_packet.read_all()
+
+    def _read_result_packet(self):
+        self.field_count = byte2int(self.first_packet.read(1))
+        self._get_descriptions()
+        self._read_rowdata_packet()
+
+    # TODO: implement this as an iteratable so that it is more
+    #       memory efficient and lower-latency to client...
+    def _read_rowdata_packet(self):
+      """Read a rowdata packet for each data row in the result set."""
+      rows = []
+      while True:
+        packet = self.connection.read_packet()
+        if packet.is_eof_packet():
+            self.warning_count = packet.read(2)
+            server_status = struct.unpack('<h', packet.read(2))[0]
+            self.has_next = (server_status
+                             & SERVER_STATUS.SERVER_MORE_RESULTS_EXISTS)
+            break
+
+        row = []
+        for field in self.fields:
+            if field.type_code in self.connection.decoders:
+                converter = self.connection.decoders[field.type_code]
+
+                if DEBUG: print "DEBUG: field=%s, converter=%s" % (field, converter)
+                data = packet.read_length_coded_string()
+                converted = None
+                if data != None:
+                    converted = converter(self.connection, field, data)
+
+            row.append(converted)
+
+        rows.append(tuple(row))
+
+      self.affected_rows = len(rows)
+      self.rows = tuple(rows)
+      if DEBUG: self.rows
+
+    def _get_descriptions(self):
+        """Read a column descriptor packet for each column in the result."""
+        self.fields = []
+        description = []
+        for i in xrange(self.field_count):
+            field = self.connection.read_packet(FieldDescriptorPacket)
+            self.fields.append(field)
+            description.append(field.description())
+
+        eof_packet = self.connection.read_packet()
+        assert eof_packet.is_eof_packet(), 'Protocol error, expecting EOF'
+        self.description = tuple(description)

ADDED   gluon/contrib/pymysql/constants/CLIENT.py
Index: gluon/contrib/pymysql/constants/CLIENT.py
==================================================================
--- /dev/null
+++ gluon/contrib/pymysql/constants/CLIENT.py
@@ -0,0 +1,20 @@
+
+LONG_PASSWORD = 1
+FOUND_ROWS = 1 << 1
+LONG_FLAG = 1 << 2
+CONNECT_WITH_DB = 1 << 3
+NO_SCHEMA = 1 << 4
+COMPRESS = 1 << 5
+ODBC = 1 << 6
+LOCAL_FILES = 1 << 7
+IGNORE_SPACE = 1 << 8
+PROTOCOL_41 = 1 << 9
+INTERACTIVE = 1 << 10
+SSL = 1 << 11
+IGNORE_SIGPIPE = 1 << 12
+TRANSACTIONS  = 1 << 13
+SECURE_CONNECTION = 1 << 15
+MULTI_STATEMENTS = 1 << 16
+MULTI_RESULTS = 1 << 17
+CAPABILITIES = LONG_PASSWORD|LONG_FLAG|TRANSACTIONS| \
+    PROTOCOL_41|SECURE_CONNECTION

ADDED   gluon/contrib/pymysql/constants/COMMAND.py
Index: gluon/contrib/pymysql/constants/COMMAND.py
==================================================================
--- /dev/null
+++ gluon/contrib/pymysql/constants/COMMAND.py
@@ -0,0 +1,23 @@
+
+COM_SLEEP = 0x00
+COM_QUIT = 0x01
+COM_INIT_DB = 0x02
+COM_QUERY = 0x03
+COM_FIELD_LIST = 0x04
+COM_CREATE_DB = 0x05
+COM_DROP_DB = 0x06
+COM_REFRESH = 0x07
+COM_SHUTDOWN = 0x08
+COM_STATISTICS = 0x09
+COM_PROCESS_INFO = 0x0a
+COM_CONNECT = 0x0b
+COM_PROCESS_KILL = 0x0c
+COM_DEBUG = 0x0d
+COM_PING = 0x0e
+COM_TIME = 0x0f
+COM_DELAYED_INSERT = 0x10
+COM_CHANGE_USER = 0x11
+COM_BINLOG_DUMP = 0x12
+COM_TABLE_DUMP = 0x13
+COM_CONNECT_OUT = 0x14
+COM_REGISTER_SLAVE = 0x15

ADDED   gluon/contrib/pymysql/constants/ER.py
Index: gluon/contrib/pymysql/constants/ER.py
==================================================================
--- /dev/null
+++ gluon/contrib/pymysql/constants/ER.py
@@ -0,0 +1,472 @@
+
+ERROR_FIRST = 1000
+HASHCHK = 1000
+NISAMCHK = 1001
+NO = 1002
+YES = 1003
+CANT_CREATE_FILE = 1004
+CANT_CREATE_TABLE = 1005
+CANT_CREATE_DB = 1006
+DB_CREATE_EXISTS = 1007
+DB_DROP_EXISTS = 1008
+DB_DROP_DELETE = 1009
+DB_DROP_RMDIR = 1010
+CANT_DELETE_FILE = 1011
+CANT_FIND_SYSTEM_REC = 1012
+CANT_GET_STAT = 1013
+CANT_GET_WD = 1014
+CANT_LOCK = 1015
+CANT_OPEN_FILE = 1016
+FILE_NOT_FOUND = 1017
+CANT_READ_DIR = 1018
+CANT_SET_WD = 1019
+CHECKREAD = 1020
+DISK_FULL = 1021
+DUP_KEY = 1022
+ERROR_ON_CLOSE = 1023
+ERROR_ON_READ = 1024
+ERROR_ON_RENAME = 1025
+ERROR_ON_WRITE = 1026
+FILE_USED = 1027
+FILSORT_ABORT = 1028
+FORM_NOT_FOUND = 1029
+GET_ERRNO = 1030
+ILLEGAL_HA = 1031
+KEY_NOT_FOUND = 1032
+NOT_FORM_FILE = 1033
+NOT_KEYFILE = 1034
+OLD_KEYFILE = 1035
+OPEN_AS_READONLY = 1036
+OUTOFMEMORY = 1037
+OUT_OF_SORTMEMORY = 1038
+UNEXPECTED_EOF = 1039
+CON_COUNT_ERROR = 1040
+OUT_OF_RESOURCES = 1041
+BAD_HOST_ERROR = 1042
+HANDSHAKE_ERROR = 1043
+DBACCESS_DENIED_ERROR = 1044
+ACCESS_DENIED_ERROR = 1045
+NO_DB_ERROR = 1046
+UNKNOWN_COM_ERROR = 1047
+BAD_NULL_ERROR = 1048
+BAD_DB_ERROR = 1049
+TABLE_EXISTS_ERROR = 1050
+BAD_TABLE_ERROR = 1051
+NON_UNIQ_ERROR = 1052
+SERVER_SHUTDOWN = 1053
+BAD_FIELD_ERROR = 1054
+WRONG_FIELD_WITH_GROUP = 1055
+WRONG_GROUP_FIELD = 1056
+WRONG_SUM_SELECT = 1057
+WRONG_VALUE_COUNT = 1058
+TOO_LONG_IDENT = 1059
+DUP_FIELDNAME = 1060
+DUP_KEYNAME = 1061
+DUP_ENTRY = 1062
+WRONG_FIELD_SPEC = 1063
+PARSE_ERROR = 1064
+EMPTY_QUERY = 1065
+NONUNIQ_TABLE = 1066
+INVALID_DEFAULT = 1067
+MULTIPLE_PRI_KEY = 1068
+TOO_MANY_KEYS = 1069
+TOO_MANY_KEY_PARTS = 1070
+TOO_LONG_KEY = 1071
+KEY_COLUMN_DOES_NOT_EXITS = 1072
+BLOB_USED_AS_KEY = 1073
+TOO_BIG_FIELDLENGTH = 1074
+WRONG_AUTO_KEY = 1075
+READY = 1076
+NORMAL_SHUTDOWN = 1077
+GOT_SIGNAL = 1078
+SHUTDOWN_COMPLETE = 1079
+FORCING_CLOSE = 1080
+IPSOCK_ERROR = 1081
+NO_SUCH_INDEX = 1082
+WRONG_FIELD_TERMINATORS = 1083
+BLOBS_AND_NO_TERMINATED = 1084
+TEXTFILE_NOT_READABLE = 1085
+FILE_EXISTS_ERROR = 1086
+LOAD_INFO = 1087
+ALTER_INFO = 1088
+WRONG_SUB_KEY = 1089
+CANT_REMOVE_ALL_FIELDS = 1090
+CANT_DROP_FIELD_OR_KEY = 1091
+INSERT_INFO = 1092
+UPDATE_TABLE_USED = 1093
+NO_SUCH_THREAD = 1094
+KILL_DENIED_ERROR = 1095
+NO_TABLES_USED = 1096
+TOO_BIG_SET = 1097
+NO_UNIQUE_LOGFILE = 1098
+TABLE_NOT_LOCKED_FOR_WRITE = 1099
+TABLE_NOT_LOCKED = 1100
+BLOB_CANT_HAVE_DEFAULT = 1101
+WRONG_DB_NAME = 1102
+WRONG_TABLE_NAME = 1103
+TOO_BIG_SELECT = 1104
+UNKNOWN_ERROR = 1105
+UNKNOWN_PROCEDURE = 1106
+WRONG_PARAMCOUNT_TO_PROCEDURE = 1107
+WRONG_PARAMETERS_TO_PROCEDURE = 1108
+UNKNOWN_TABLE = 1109
+FIELD_SPECIFIED_TWICE = 1110
+INVALID_GROUP_FUNC_USE = 1111
+UNSUPPORTED_EXTENSION = 1112
+TABLE_MUST_HAVE_COLUMNS = 1113
+RECORD_FILE_FULL = 1114
+UNKNOWN_CHARACTER_SET = 1115
+TOO_MANY_TABLES = 1116
+TOO_MANY_FIELDS = 1117
+TOO_BIG_ROWSIZE = 1118
+STACK_OVERRUN = 1119
+WRONG_OUTER_JOIN = 1120
+NULL_COLUMN_IN_INDEX = 1121
+CANT_FIND_UDF = 1122
+CANT_INITIALIZE_UDF = 1123
+UDF_NO_PATHS = 1124
+UDF_EXISTS = 1125
+CANT_OPEN_LIBRARY = 1126
+CANT_FIND_DL_ENTRY = 1127
+FUNCTION_NOT_DEFINED = 1128
+HOST_IS_BLOCKED = 1129
+HOST_NOT_PRIVILEGED = 1130
+PASSWORD_ANONYMOUS_USER = 1131
+PASSWORD_NOT_ALLOWED = 1132
+PASSWORD_NO_MATCH = 1133
+UPDATE_INFO = 1134
+CANT_CREATE_THREAD = 1135
+WRONG_VALUE_COUNT_ON_ROW = 1136
+CANT_REOPEN_TABLE = 1137
+INVALID_USE_OF_NULL = 1138
+REGEXP_ERROR = 1139
+MIX_OF_GROUP_FUNC_AND_FIELDS = 1140
+NONEXISTING_GRANT = 1141
+TABLEACCESS_DENIED_ERROR = 1142
+COLUMNACCESS_DENIED_ERROR = 1143
+ILLEGAL_GRANT_FOR_TABLE = 1144
+GRANT_WRONG_HOST_OR_USER = 1145
+NO_SUCH_TABLE = 1146
+NONEXISTING_TABLE_GRANT = 1147
+NOT_ALLOWED_COMMAND = 1148
+SYNTAX_ERROR = 1149
+DELAYED_CANT_CHANGE_LOCK = 1150
+TOO_MANY_DELAYED_THREADS = 1151
+ABORTING_CONNECTION = 1152
+NET_PACKET_TOO_LARGE = 1153
+NET_READ_ERROR_FROM_PIPE = 1154
+NET_FCNTL_ERROR = 1155
+NET_PACKETS_OUT_OF_ORDER = 1156
+NET_UNCOMPRESS_ERROR = 1157
+NET_READ_ERROR = 1158
+NET_READ_INTERRUPTED = 1159
+NET_ERROR_ON_WRITE = 1160
+NET_WRITE_INTERRUPTED = 1161
+TOO_LONG_STRING = 1162
+TABLE_CANT_HANDLE_BLOB = 1163
+TABLE_CANT_HANDLE_AUTO_INCREMENT = 1164
+DELAYED_INSERT_TABLE_LOCKED = 1165
+WRONG_COLUMN_NAME = 1166
+WRONG_KEY_COLUMN = 1167
+WRONG_MRG_TABLE = 1168
+DUP_UNIQUE = 1169
+BLOB_KEY_WITHOUT_LENGTH = 1170
+PRIMARY_CANT_HAVE_NULL = 1171
+TOO_MANY_ROWS = 1172
+REQUIRES_PRIMARY_KEY = 1173
+NO_RAID_COMPILED = 1174
+UPDATE_WITHOUT_KEY_IN_SAFE_MODE = 1175
+KEY_DOES_NOT_EXITS = 1176
+CHECK_NO_SUCH_TABLE = 1177
+CHECK_NOT_IMPLEMENTED = 1178
+CANT_DO_THIS_DURING_AN_TRANSACTION = 1179
+ERROR_DURING_COMMIT = 1180
+ERROR_DURING_ROLLBACK = 1181
+ERROR_DURING_FLUSH_LOGS = 1182
+ERROR_DURING_CHECKPOINT = 1183
+NEW_ABORTING_CONNECTION = 1184
+DUMP_NOT_IMPLEMENTED = 1185
+FLUSH_MASTER_BINLOG_CLOSED = 1186
+INDEX_REBUILD = 1187
+MASTER = 1188
+MASTER_NET_READ = 1189
+MASTER_NET_WRITE = 1190
+FT_MATCHING_KEY_NOT_FOUND = 1191
+LOCK_OR_ACTIVE_TRANSACTION = 1192
+UNKNOWN_SYSTEM_VARIABLE = 1193
+CRASHED_ON_USAGE = 1194
+CRASHED_ON_REPAIR = 1195
+WARNING_NOT_COMPLETE_ROLLBACK = 1196
+TRANS_CACHE_FULL = 1197
+SLAVE_MUST_STOP = 1198
+SLAVE_NOT_RUNNING = 1199
+BAD_SLAVE = 1200
+MASTER_INFO = 1201
+SLAVE_THREAD = 1202
+TOO_MANY_USER_CONNECTIONS = 1203
+SET_CONSTANTS_ONLY = 1204
+LOCK_WAIT_TIMEOUT = 1205
+LOCK_TABLE_FULL = 1206
+READ_ONLY_TRANSACTION = 1207
+DROP_DB_WITH_READ_LOCK = 1208
+CREATE_DB_WITH_READ_LOCK = 1209
+WRONG_ARGUMENTS = 1210
+NO_PERMISSION_TO_CREATE_USER = 1211
+UNION_TABLES_IN_DIFFERENT_DIR = 1212
+LOCK_DEADLOCK = 1213
+TABLE_CANT_HANDLE_FT = 1214
+CANNOT_ADD_FOREIGN = 1215
+NO_REFERENCED_ROW = 1216
+ROW_IS_REFERENCED = 1217
+CONNECT_TO_MASTER = 1218
+QUERY_ON_MASTER = 1219
+ERROR_WHEN_EXECUTING_COMMAND = 1220
+WRONG_USAGE = 1221
+WRONG_NUMBER_OF_COLUMNS_IN_SELECT = 1222
+CANT_UPDATE_WITH_READLOCK = 1223
+MIXING_NOT_ALLOWED = 1224
+DUP_ARGUMENT = 1225
+USER_LIMIT_REACHED = 1226
+SPECIFIC_ACCESS_DENIED_ERROR = 1227
+LOCAL_VARIABLE = 1228
+GLOBAL_VARIABLE = 1229
+NO_DEFAULT = 1230
+WRONG_VALUE_FOR_VAR = 1231
+WRONG_TYPE_FOR_VAR = 1232
+VAR_CANT_BE_READ = 1233
+CANT_USE_OPTION_HERE = 1234
+NOT_SUPPORTED_YET = 1235
+MASTER_FATAL_ERROR_READING_BINLOG = 1236
+SLAVE_IGNORED_TABLE = 1237
+INCORRECT_GLOBAL_LOCAL_VAR = 1238
+WRONG_FK_DEF = 1239
+KEY_REF_DO_NOT_MATCH_TABLE_REF = 1240
+OPERAND_COLUMNS = 1241
+SUBQUERY_NO_1_ROW = 1242
+UNKNOWN_STMT_HANDLER = 1243
+CORRUPT_HELP_DB = 1244
+CYCLIC_REFERENCE = 1245
+AUTO_CONVERT = 1246
+ILLEGAL_REFERENCE = 1247
+DERIVED_MUST_HAVE_ALIAS = 1248
+SELECT_REDUCED = 1249
+TABLENAME_NOT_ALLOWED_HERE = 1250
+NOT_SUPPORTED_AUTH_MODE = 1251
+SPATIAL_CANT_HAVE_NULL = 1252
+COLLATION_CHARSET_MISMATCH = 1253
+SLAVE_WAS_RUNNING = 1254
+SLAVE_WAS_NOT_RUNNING = 1255
+TOO_BIG_FOR_UNCOMPRESS = 1256
+ZLIB_Z_MEM_ERROR = 1257
+ZLIB_Z_BUF_ERROR = 1258
+ZLIB_Z_DATA_ERROR = 1259
+CUT_VALUE_GROUP_CONCAT = 1260
+WARN_TOO_FEW_RECORDS = 1261
+WARN_TOO_MANY_RECORDS = 1262
+WARN_NULL_TO_NOTNULL = 1263
+WARN_DATA_OUT_OF_RANGE = 1264
+WARN_DATA_TRUNCATED = 1265
+WARN_USING_OTHER_HANDLER = 1266
+CANT_AGGREGATE_2COLLATIONS = 1267
+DROP_USER = 1268
+REVOKE_GRANTS = 1269
+CANT_AGGREGATE_3COLLATIONS = 1270
+CANT_AGGREGATE_NCOLLATIONS = 1271
+VARIABLE_IS_NOT_STRUCT = 1272
+UNKNOWN_COLLATION = 1273
+SLAVE_IGNORED_SSL_PARAMS = 1274
+SERVER_IS_IN_SECURE_AUTH_MODE = 1275
+WARN_FIELD_RESOLVED = 1276
+BAD_SLAVE_UNTIL_COND = 1277
+MISSING_SKIP_SLAVE = 1278
+UNTIL_COND_IGNORED = 1279
+WRONG_NAME_FOR_INDEX = 1280
+WRONG_NAME_FOR_CATALOG = 1281
+WARN_QC_RESIZE = 1282
+BAD_FT_COLUMN = 1283
+UNKNOWN_KEY_CACHE = 1284
+WARN_HOSTNAME_WONT_WORK = 1285
+UNKNOWN_STORAGE_ENGINE = 1286
+WARN_DEPRECATED_SYNTAX = 1287
+NON_UPDATABLE_TABLE = 1288
+FEATURE_DISABLED = 1289
+OPTION_PREVENTS_STATEMENT = 1290
+DUPLICATED_VALUE_IN_TYPE = 1291
+TRUNCATED_WRONG_VALUE = 1292
+TOO_MUCH_AUTO_TIMESTAMP_COLS = 1293
+INVALID_ON_UPDATE = 1294
+UNSUPPORTED_PS = 1295
+GET_ERRMSG = 1296
+GET_TEMPORARY_ERRMSG = 1297
+UNKNOWN_TIME_ZONE = 1298
+WARN_INVALID_TIMESTAMP = 1299
+INVALID_CHARACTER_STRING = 1300
+WARN_ALLOWED_PACKET_OVERFLOWED = 1301
+CONFLICTING_DECLARATIONS = 1302
+SP_NO_RECURSIVE_CREATE = 1303
+SP_ALREADY_EXISTS = 1304
+SP_DOES_NOT_EXIST = 1305
+SP_DROP_FAILED = 1306
+SP_STORE_FAILED = 1307
+SP_LILABEL_MISMATCH = 1308
+SP_LABEL_REDEFINE = 1309
+SP_LABEL_MISMATCH = 1310
+SP_UNINIT_VAR = 1311
+SP_BADSELECT = 1312
+SP_BADRETURN = 1313
+SP_BADSTATEMENT = 1314
+UPDATE_LOG_DEPRECATED_IGNORED = 1315
+UPDATE_LOG_DEPRECATED_TRANSLATED = 1316
+QUERY_INTERRUPTED = 1317
+SP_WRONG_NO_OF_ARGS = 1318
+SP_COND_MISMATCH = 1319
+SP_NORETURN = 1320
+SP_NORETURNEND = 1321
+SP_BAD_CURSOR_QUERY = 1322
+SP_BAD_CURSOR_SELECT = 1323
+SP_CURSOR_MISMATCH = 1324
+SP_CURSOR_ALREADY_OPEN = 1325
+SP_CURSOR_NOT_OPEN = 1326
+SP_UNDECLARED_VAR = 1327
+SP_WRONG_NO_OF_FETCH_ARGS = 1328
+SP_FETCH_NO_DATA = 1329
+SP_DUP_PARAM = 1330
+SP_DUP_VAR = 1331
+SP_DUP_COND = 1332
+SP_DUP_CURS = 1333
+SP_CANT_ALTER = 1334
+SP_SUBSELECT_NYI = 1335
+STMT_NOT_ALLOWED_IN_SF_OR_TRG = 1336
+SP_VARCOND_AFTER_CURSHNDLR = 1337
+SP_CURSOR_AFTER_HANDLER = 1338
+SP_CASE_NOT_FOUND = 1339
+FPARSER_TOO_BIG_FILE = 1340
+FPARSER_BAD_HEADER = 1341
+FPARSER_EOF_IN_COMMENT = 1342
+FPARSER_ERROR_IN_PARAMETER = 1343
+FPARSER_EOF_IN_UNKNOWN_PARAMETER = 1344
+VIEW_NO_EXPLAIN = 1345
+FRM_UNKNOWN_TYPE = 1346
+WRONG_OBJECT = 1347
+NONUPDATEABLE_COLUMN = 1348
+VIEW_SELECT_DERIVED = 1349
+VIEW_SELECT_CLAUSE = 1350
+VIEW_SELECT_VARIABLE = 1351
+VIEW_SELECT_TMPTABLE = 1352
+VIEW_WRONG_LIST = 1353
+WARN_VIEW_MERGE = 1354
+WARN_VIEW_WITHOUT_KEY = 1355
+VIEW_INVALID = 1356
+SP_NO_DROP_SP = 1357
+SP_GOTO_IN_HNDLR = 1358
+TRG_ALREADY_EXISTS = 1359
+TRG_DOES_NOT_EXIST = 1360
+TRG_ON_VIEW_OR_TEMP_TABLE = 1361
+TRG_CANT_CHANGE_ROW = 1362
+TRG_NO_SUCH_ROW_IN_TRG = 1363
+NO_DEFAULT_FOR_FIELD = 1364
+DIVISION_BY_ZERO = 1365
+TRUNCATED_WRONG_VALUE_FOR_FIELD = 1366
+ILLEGAL_VALUE_FOR_TYPE = 1367
+VIEW_NONUPD_CHECK = 1368
+VIEW_CHECK_FAILED = 1369
+PROCACCESS_DENIED_ERROR = 1370
+RELAY_LOG_FAIL = 1371
+PASSWD_LENGTH = 1372
+UNKNOWN_TARGET_BINLOG = 1373
+IO_ERR_LOG_INDEX_READ = 1374
+BINLOG_PURGE_PROHIBITED = 1375
+FSEEK_FAIL = 1376
+BINLOG_PURGE_FATAL_ERR = 1377
+LOG_IN_USE = 1378
+LOG_PURGE_UNKNOWN_ERR = 1379
+RELAY_LOG_INIT = 1380
+NO_BINARY_LOGGING = 1381
+RESERVED_SYNTAX = 1382
+WSAS_FAILED = 1383
+DIFF_GROUPS_PROC = 1384
+NO_GROUP_FOR_PROC = 1385
+ORDER_WITH_PROC = 1386
+LOGGING_PROHIBIT_CHANGING_OF = 1387
+NO_FILE_MAPPING = 1388
+WRONG_MAGIC = 1389
+PS_MANY_PARAM = 1390
+KEY_PART_0 = 1391
+VIEW_CHECKSUM = 1392
+VIEW_MULTIUPDATE = 1393
+VIEW_NO_INSERT_FIELD_LIST = 1394
+VIEW_DELETE_MERGE_VIEW = 1395
+CANNOT_USER = 1396
+XAER_NOTA = 1397
+XAER_INVAL = 1398
+XAER_RMFAIL = 1399
+XAER_OUTSIDE = 1400
+XAER_RMERR = 1401
+XA_RBROLLBACK = 1402
+NONEXISTING_PROC_GRANT = 1403
+PROC_AUTO_GRANT_FAIL = 1404
+PROC_AUTO_REVOKE_FAIL = 1405
+DATA_TOO_LONG = 1406
+SP_BAD_SQLSTATE = 1407
+STARTUP = 1408
+LOAD_FROM_FIXED_SIZE_ROWS_TO_VAR = 1409
+CANT_CREATE_USER_WITH_GRANT = 1410
+WRONG_VALUE_FOR_TYPE = 1411
+TABLE_DEF_CHANGED = 1412
+SP_DUP_HANDLER = 1413
+SP_NOT_VAR_ARG = 1414
+SP_NO_RETSET = 1415
+CANT_CREATE_GEOMETRY_OBJECT = 1416
+FAILED_ROUTINE_BREAK_BINLOG = 1417
+BINLOG_UNSAFE_ROUTINE = 1418
+BINLOG_CREATE_ROUTINE_NEED_SUPER = 1419
+EXEC_STMT_WITH_OPEN_CURSOR = 1420
+STMT_HAS_NO_OPEN_CURSOR = 1421
+COMMIT_NOT_ALLOWED_IN_SF_OR_TRG = 1422
+NO_DEFAULT_FOR_VIEW_FIELD = 1423
+SP_NO_RECURSION = 1424
+TOO_BIG_SCALE = 1425
+TOO_BIG_PRECISION = 1426
+M_BIGGER_THAN_D = 1427
+WRONG_LOCK_OF_SYSTEM_TABLE = 1428
+CONNECT_TO_FOREIGN_DATA_SOURCE = 1429
+QUERY_ON_FOREIGN_DATA_SOURCE = 1430
+FOREIGN_DATA_SOURCE_DOESNT_EXIST = 1431
+FOREIGN_DATA_STRING_INVALID_CANT_CREATE = 1432
+FOREIGN_DATA_STRING_INVALID = 1433
+CANT_CREATE_FEDERATED_TABLE = 1434
+TRG_IN_WRONG_SCHEMA = 1435
+STACK_OVERRUN_NEED_MORE = 1436
+TOO_LONG_BODY = 1437
+WARN_CANT_DROP_DEFAULT_KEYCACHE = 1438
+TOO_BIG_DISPLAYWIDTH = 1439
+XAER_DUPID = 1440
+DATETIME_FUNCTION_OVERFLOW = 1441
+CANT_UPDATE_USED_TABLE_IN_SF_OR_TRG = 1442
+VIEW_PREVENT_UPDATE = 1443
+PS_NO_RECURSION = 1444
+SP_CANT_SET_AUTOCOMMIT = 1445
+MALFORMED_DEFINER = 1446
+VIEW_FRM_NO_USER = 1447
+VIEW_OTHER_USER = 1448
+NO_SUCH_USER = 1449
+FORBID_SCHEMA_CHANGE = 1450
+ROW_IS_REFERENCED_2 = 1451
+NO_REFERENCED_ROW_2 = 1452
+SP_BAD_VAR_SHADOW = 1453
+TRG_NO_DEFINER = 1454
+OLD_FILE_FORMAT = 1455
+SP_RECURSION_LIMIT = 1456
+SP_PROC_TABLE_CORRUPT = 1457
+SP_WRONG_NAME = 1458
+TABLE_NEEDS_UPGRADE = 1459
+SP_NO_AGGREGATE = 1460
+MAX_PREPARED_STMT_COUNT_REACHED = 1461
+VIEW_RECURSIVE = 1462
+NON_GROUPING_FIELD_USED = 1463
+TABLE_CANT_HANDLE_SPKEYS = 1464
+NO_TRIGGERS_ON_SYSTEM_SCHEMA = 1465
+USERNAME = 1466
+HOSTNAME = 1467
+WRONG_STRING_LENGTH = 1468
+ERROR_LAST = 1468

ADDED   gluon/contrib/pymysql/constants/FIELD_TYPE.py
Index: gluon/contrib/pymysql/constants/FIELD_TYPE.py
==================================================================
--- /dev/null
+++ gluon/contrib/pymysql/constants/FIELD_TYPE.py
@@ -0,0 +1,32 @@
+
+
+DECIMAL = 0
+TINY = 1
+SHORT = 2
+LONG = 3
+FLOAT = 4
+DOUBLE = 5
+NULL = 6
+TIMESTAMP = 7
+LONGLONG = 8
+INT24 = 9
+DATE = 10
+TIME = 11
+DATETIME = 12
+YEAR = 13
+NEWDATE = 14
+VARCHAR = 15
+BIT = 16
+NEWDECIMAL = 246
+ENUM = 247
+SET = 248
+TINY_BLOB = 249
+MEDIUM_BLOB = 250
+LONG_BLOB = 251
+BLOB = 252
+VAR_STRING = 253
+STRING = 254
+GEOMETRY = 255
+
+CHAR = TINY
+INTERVAL = ENUM

ADDED   gluon/contrib/pymysql/constants/FLAG.py
Index: gluon/contrib/pymysql/constants/FLAG.py
==================================================================
--- /dev/null
+++ gluon/contrib/pymysql/constants/FLAG.py
@@ -0,0 +1,15 @@
+NOT_NULL = 1
+PRI_KEY = 2
+UNIQUE_KEY = 4
+MULTIPLE_KEY = 8
+BLOB = 16
+UNSIGNED = 32
+ZEROFILL = 64
+BINARY = 128
+ENUM = 256
+AUTO_INCREMENT = 512
+TIMESTAMP = 1024
+SET = 2048
+PART_KEY = 16384
+GROUP = 32767
+UNIQUE = 65536

ADDED   gluon/contrib/pymysql/constants/SERVER_STATUS.py
Index: gluon/contrib/pymysql/constants/SERVER_STATUS.py
==================================================================
--- /dev/null
+++ gluon/contrib/pymysql/constants/SERVER_STATUS.py
@@ -0,0 +1,12 @@
+
+SERVER_STATUS_IN_TRANS = 1
+SERVER_STATUS_AUTOCOMMIT = 2
+SERVER_MORE_RESULTS_EXISTS = 8
+SERVER_QUERY_NO_GOOD_INDEX_USED = 16
+SERVER_QUERY_NO_INDEX_USED = 32
+SERVER_STATUS_CURSOR_EXISTS = 64
+SERVER_STATUS_LAST_ROW_SENT = 128
+SERVER_STATUS_DB_DROPPED = 256
+SERVER_STATUS_NO_BACKSLASH_ESCAPES = 512
+SERVER_STATUS_METADATA_CHANGED = 1024
+

ADDED   gluon/contrib/pymysql/constants/__init__.py
Index: gluon/contrib/pymysql/constants/__init__.py
==================================================================
--- /dev/null
+++ gluon/contrib/pymysql/constants/__init__.py

ADDED   gluon/contrib/pymysql/converters.py
Index: gluon/contrib/pymysql/converters.py
==================================================================
--- /dev/null
+++ gluon/contrib/pymysql/converters.py
@@ -0,0 +1,346 @@
+import re
+import datetime
+import time
+
+from constants import FIELD_TYPE, FLAG
+from charset import charset_by_id
+
+try:
+    set
+except NameError:
+    try:
+        from sets import BaseSet as set
+    except ImportError:
+        from sets import Set as set
+
+ESCAPE_REGEX = re.compile(r"[\0\n\r\032\'\"\\]")
+ESCAPE_MAP = {'\0': '\\0', '\n': '\\n', '\r': '\\r', '\032': '\\Z',
+              '\'': '\\\'', '"': '\\"', '\\': '\\\\'}
+
+def escape_item(val, charset):
+    if type(val) in [tuple, list, set]:
+        return escape_sequence(val, charset)
+    if type(val) is dict:
+        return escape_dict(val, charset)
+    if hasattr(val, "decode") and not isinstance(val, unicode):
+        # deal with py3k bytes
+        val = val.decode(charset)
+    encoder = encoders[type(val)]
+    val = encoder(val)
+    if type(val) is str:
+        return val
+    val = val.encode(charset)
+    return val
+
+def escape_dict(val, charset):
+    n = {}
+    for k, v in val.items():
+        quoted = escape_item(v, charset)
+        n[k] = quoted
+    return n
+
+def escape_sequence(val, charset):
+    n = []
+    for item in val:
+        quoted = escape_item(item, charset)
+        n.append(quoted)
+    return tuple(n)
+
+def escape_set(val, charset):
+    val = map(lambda x: escape_item(x, charset), val)
+    return ','.join(val)
+
+def escape_bool(value):
+    return str(int(value))
+
+def escape_object(value):
+    return str(value)
+
+escape_int = escape_long = escape_object
+
+def escape_float(value):
+    return ('%.15g' % value)
+
+def escape_string(value):
+    return ("'%s'" % ESCAPE_REGEX.sub(
+            lambda match: ESCAPE_MAP.get(match.group(0)), value))
+
+def escape_unicode(value):
+    return escape_string(value)
+
+def escape_None(value):
+    return 'NULL'
+
+def escape_timedelta(obj):
+    seconds = int(obj.seconds) % 60
+    minutes = int(obj.seconds // 60) % 60
+    hours = int(obj.seconds // 3600) % 24 + int(obj.days) * 24
+    return escape_string('%02d:%02d:%02d' % (hours, minutes, seconds))
+
+def escape_time(obj):
+    s = "%02d:%02d:%02d" % (int(obj.hour), int(obj.minute),
+                            int(obj.second))
+    if obj.microsecond:
+        s += ".%f" % obj.microsecond
+
+    return escape_string(s)
+
+def escape_datetime(obj):
+    return escape_string(obj.strftime("%Y-%m-%d %H:%M:%S"))
+
+def escape_date(obj):
+    return escape_string(obj.strftime("%Y-%m-%d"))
+
+def escape_struct_time(obj):
+    return escape_datetime(datetime.datetime(*obj[:6]))
+
+def convert_datetime(connection, field, obj):
+    """Returns a DATETIME or TIMESTAMP column value as a datetime object:
+
+      >>> datetime_or_None('2007-02-25 23:06:20')
+      datetime.datetime(2007, 2, 25, 23, 6, 20)
+      >>> datetime_or_None('2007-02-25T23:06:20')
+      datetime.datetime(2007, 2, 25, 23, 6, 20)
+
+    Illegal values are returned as None:
+
+      >>> datetime_or_None('2007-02-31T23:06:20') is None
+      True
+      >>> datetime_or_None('0000-00-00 00:00:00') is None
+      True
+
+    """
+    if not isinstance(obj, unicode):
+        obj = obj.decode(connection.charset)
+    if ' ' in obj:
+        sep = ' '
+    elif 'T' in obj:
+        sep = 'T'
+    else:
+        return convert_date(connection, field, obj)
+
+    try:
+        ymd, hms = obj.split(sep, 1)
+        return datetime.datetime(*[ int(x) for x in ymd.split('-')+hms.split(':') ])
+    except ValueError:
+        return convert_date(connection, field, obj)
+
+def convert_timedelta(connection, field, obj):
+    """Returns a TIME column as a timedelta object:
+
+      >>> timedelta_or_None('25:06:17')
+      datetime.timedelta(1, 3977)
+      >>> timedelta_or_None('-25:06:17')
+      datetime.timedelta(-2, 83177)
+
+    Illegal values are returned as None:
+
+      >>> timedelta_or_None('random crap') is None
+      True
+
+    Note that MySQL always returns TIME columns as (+|-)HH:MM:SS, but
+    can accept values as (+|-)DD HH:MM:SS. The latter format will not
+    be parsed correctly by this function.
+    """
+    from math import modf
+    try:
+        if not isinstance(obj, unicode):
+            obj = obj.decode(connection.charset)
+        hours, minutes, seconds = tuple([int(x) for x in obj.split(':')])
+        tdelta = datetime.timedelta(
+            hours = int(hours),
+            minutes = int(minutes),
+            seconds = int(seconds),
+            microseconds = int(modf(float(seconds))[0]*1000000),
+            )
+        return tdelta
+    except ValueError:
+        return None
+
+def convert_time(connection, field, obj):
+    """Returns a TIME column as a time object:
+
+      >>> time_or_None('15:06:17')
+      datetime.time(15, 6, 17)
+
+    Illegal values are returned as None:
+
+      >>> time_or_None('-25:06:17') is None
+      True
+      >>> time_or_None('random crap') is None
+      True
+
+    Note that MySQL always returns TIME columns as (+|-)HH:MM:SS, but
+    can accept values as (+|-)DD HH:MM:SS. The latter format will not
+    be parsed correctly by this function.
+
+    Also note that MySQL's TIME column corresponds more closely to
+    Python's timedelta and not time. However if you want TIME columns
+    to be treated as time-of-day and not a time offset, then you can
+    use set this function as the converter for FIELD_TYPE.TIME.
+    """
+    from math import modf
+    try:
+        hour, minute, second = obj.split(':')
+        return datetime.time(hour=int(hour), minute=int(minute),
+                             second=int(second),
+                             microsecond=int(modf(float(second))[0]*1000000))
+    except ValueError:
+        return None
+
+def convert_date(connection, field, obj):
+    """Returns a DATE column as a date object:
+
+      >>> date_or_None('2007-02-26')
+      datetime.date(2007, 2, 26)
+
+    Illegal values are returned as None:
+
+      >>> date_or_None('2007-02-31') is None
+      True
+      >>> date_or_None('0000-00-00') is None
+      True
+
+    """
+    try:
+        if not isinstance(obj, unicode):
+            obj = obj.decode(connection.charset)
+        return datetime.date(*[ int(x) for x in obj.split('-', 2) ])
+    except ValueError:
+        return None
+
+def convert_mysql_timestamp(connection, field, timestamp):
+    """Convert a MySQL TIMESTAMP to a Timestamp object.
+
+    MySQL >= 4.1 returns TIMESTAMP in the same format as DATETIME:
+
+      >>> mysql_timestamp_converter('2007-02-25 22:32:17')
+      datetime.datetime(2007, 2, 25, 22, 32, 17)
+
+    MySQL < 4.1 uses a big string of numbers:
+
+      >>> mysql_timestamp_converter('20070225223217')
+      datetime.datetime(2007, 2, 25, 22, 32, 17)
+
+    Illegal values are returned as None:
+
+      >>> mysql_timestamp_converter('2007-02-31 22:32:17') is None
+      True
+      >>> mysql_timestamp_converter('00000000000000') is None
+      True
+
+    """
+    if not isinstance(timestamp, unicode):
+        timestamp = timestamp.decode(connection.charset)
+
+    if timestamp[4] == '-':
+        return convert_datetime(connection, field, timestamp)
+    timestamp += "0"*(14-len(timestamp)) # padding
+    year, month, day, hour, minute, second = \
+        int(timestamp[:4]), int(timestamp[4:6]), int(timestamp[6:8]), \
+        int(timestamp[8:10]), int(timestamp[10:12]), int(timestamp[12:14])
+    try:
+        return datetime.datetime(year, month, day, hour, minute, second)
+    except ValueError:
+        return None
+
+def convert_set(s):
+    return set(s.split(","))
+
+def convert_bit(connection, field, b):
+    #b = "\x00" * (8 - len(b)) + b # pad w/ zeroes
+    #return struct.unpack(">Q", b)[0]
+    #
+    # the snippet above is right, but MySQLdb doesn't process bits,
+    # so we shouldn't either
+    return b
+
+def convert_characters(connection, field, data):
+    field_charset = charset_by_id(field.charsetnr).name
+    if field.flags & FLAG.SET:
+        return convert_set(data.decode(field_charset))
+    if field.flags & FLAG.BINARY:
+        return data
+
+    if connection.use_unicode:
+        data = data.decode(field_charset)
+    elif connection.charset != field_charset:
+        data = data.decode(field_charset)
+        data = data.encode(connection.charset)
+    else:
+        data = data.decode(connection.charset)
+    return data
+
+def convert_int(connection, field, data):
+    return int(data)
+
+def convert_long(connection, field, data):
+    return long(data)
+
+def convert_float(connection, field, data):
+    return float(data)
+
+encoders = {
+        bool: escape_bool,
+        int: escape_int,
+        long: escape_long,
+        float: escape_float,
+        str: escape_string,
+        unicode: escape_unicode,
+        tuple: escape_sequence,
+        list:escape_sequence,
+        set:escape_sequence,
+        dict:escape_dict,
+        type(None):escape_None,
+        datetime.date: escape_date,
+        datetime.datetime : escape_datetime,
+        datetime.timedelta : escape_timedelta,
+        datetime.time : escape_time,
+        time.struct_time : escape_struct_time,
+        }
+
+decoders = {
+        FIELD_TYPE.BIT: convert_bit,
+        FIELD_TYPE.TINY: convert_int,
+        FIELD_TYPE.SHORT: convert_int,
+        FIELD_TYPE.LONG: convert_long,
+        FIELD_TYPE.FLOAT: convert_float,
+        FIELD_TYPE.DOUBLE: convert_float,
+        FIELD_TYPE.DECIMAL: convert_float,
+        FIELD_TYPE.NEWDECIMAL: convert_float,
+        FIELD_TYPE.LONGLONG: convert_long,
+        FIELD_TYPE.INT24: convert_int,
+        FIELD_TYPE.YEAR: convert_int,
+        FIELD_TYPE.TIMESTAMP: convert_mysql_timestamp,
+        FIELD_TYPE.DATETIME: convert_datetime,
+        FIELD_TYPE.TIME: convert_timedelta,
+        FIELD_TYPE.DATE: convert_date,
+        FIELD_TYPE.SET: convert_set,
+        FIELD_TYPE.BLOB: convert_characters,
+        FIELD_TYPE.TINY_BLOB: convert_characters,
+        FIELD_TYPE.MEDIUM_BLOB: convert_characters,
+        FIELD_TYPE.LONG_BLOB: convert_characters,
+        FIELD_TYPE.STRING: convert_characters,
+        FIELD_TYPE.VAR_STRING: convert_characters,
+        FIELD_TYPE.VARCHAR: convert_characters,
+        #FIELD_TYPE.BLOB: str,
+        #FIELD_TYPE.STRING: str,
+        #FIELD_TYPE.VAR_STRING: str,
+        #FIELD_TYPE.VARCHAR: str
+        }
+conversions = decoders  # for MySQLdb compatibility
+
+try:
+    # python version > 2.3
+    from decimal import Decimal
+    def convert_decimal(connection, field, data):
+        return Decimal(data)
+    decoders[FIELD_TYPE.DECIMAL] = convert_decimal
+    decoders[FIELD_TYPE.NEWDECIMAL] = convert_decimal
+
+    def escape_decimal(obj):
+        return unicode(obj)
+    encoders[Decimal] = escape_decimal
+
+except ImportError:
+    pass

ADDED   gluon/contrib/pymysql/cursors.py
Index: gluon/contrib/pymysql/cursors.py
==================================================================
--- /dev/null
+++ gluon/contrib/pymysql/cursors.py
@@ -0,0 +1,250 @@
+# -*- coding: utf-8 -*-
+import struct
+import re
+
+try:
+    import cStringIO as StringIO
+except ImportError:
+    import StringIO
+
+from err import Warning, Error, InterfaceError, DataError, \
+             DatabaseError, OperationalError, IntegrityError, InternalError, \
+            NotSupportedError, ProgrammingError
+
+insert_values = re.compile(r'\svalues\s*(\(.+\))', re.IGNORECASE)
+
+class Cursor(object):
+    '''
+    This is the object you use to interact with the database.
+    '''
+    def __init__(self, connection):
+        '''
+        Do not create an instance of a Cursor yourself. Call
+        connections.Connection.cursor().
+        '''
+        from weakref import proxy
+        self.connection = proxy(connection)
+        self.description = None
+        self.rownumber = 0
+        self.rowcount = -1
+        self.arraysize = 1
+        self._executed = None
+        self.messages = []
+        self.errorhandler = connection.errorhandler
+        self._has_next = None
+        self._rows = ()
+
+    def __del__(self):
+        '''
+        When this gets GC'd close it.
+        '''
+        self.close()
+
+    def close(self):
+        '''
+        Closing a cursor just exhausts all remaining data.
+        '''
+        if not self.connection:
+            return
+        try:
+            while self.nextset():
+                pass
+        except:
+            pass
+
+        self.connection = None
+
+    def _get_db(self):
+        if not self.connection:
+            self.errorhandler(self, ProgrammingError, "cursor closed")
+        return self.connection
+
+    def _check_executed(self):
+        if not self._executed:
+            self.errorhandler(self, ProgrammingError, "execute() first")
+
+    def setinputsizes(self, *args):
+        """Does nothing, required by DB API."""
+
+    def setoutputsizes(self, *args):
+        """Does nothing, required by DB API."""
+
+    def nextset(self):
+        ''' Get the next query set '''
+        if self._executed:
+            self.fetchall()
+        del self.messages[:]
+
+        if not self._has_next:
+            return None
+        connection = self._get_db()
+        connection.next_result()
+        self._do_get_result()
+        return True
+
+    def execute(self, query, args=None):
+        ''' Execute a query '''
+        from sys import exc_info
+
+        conn = self._get_db()
+        charset = conn.charset
+        del self.messages[:]
+
+        # TODO: make sure that conn.escape is correct
+
+        if args is not None:
+            query = query % conn.escape(args)
+
+        if isinstance(query, unicode):
+            query = query.encode(charset)
+
+        result = 0
+        try:
+            result = self._query(query)
+        except:
+            exc, value, tb = exc_info()
+            del tb
+            self.messages.append((exc,value))
+            self.errorhandler(self, exc, value)
+
+        self._executed = query
+        return result
+
+    def executemany(self, query, args):
+        ''' Run several data against one query '''
+        del self.messages[:]
+        conn = self._get_db()
+        if not args:
+            return
+        charset = conn.charset
+        if isinstance(query, unicode):
+            query = query.encode(charset)
+
+        self.rowcount = sum([ self.execute(query, arg) for arg in args ])
+        return self.rowcount
+
+
+    def callproc(self, procname, args=()):
+        """Execute stored procedure procname with args
+
+        procname -- string, name of procedure to execute on server
+
+        args -- Sequence of parameters to use with procedure
+
+        Returns the original args.
+
+        Compatibility warning: PEP-249 specifies that any modified
+        parameters must be returned. This is currently impossible
+        as they are only available by storing them in a server
+        variable and then retrieved by a query. Since stored
+        procedures return zero or more result sets, there is no
+        reliable way to get at OUT or INOUT parameters via callproc.
+        The server variables are named @_procname_n, where procname
+        is the parameter above and n is the position of the parameter
+        (from zero). Once all result sets generated by the procedure
+        have been fetched, you can issue a SELECT @_procname_0, ...
+        query using .execute() to get any OUT or INOUT values.
+
+        Compatibility warning: The act of calling a stored procedure
+        itself creates an empty result set. This appears after any
+        result sets generated by the procedure. This is non-standard
+        behavior with respect to the DB-API. Be sure to use nextset()
+        to advance through all result sets; otherwise you may get
+        disconnected.
+        """
+        conn = self._get_db()
+        for index, arg in enumerate(args):
+            q = "SET @_%s_%d=%s" % (procname, index, conn.escape(arg))
+            if isinstance(q, unicode):
+                q = q.encode(conn.charset)
+            self._query(q)
+            self.nextset()
+
+        q = "CALL %s(%s)" % (procname,
+                             ','.join(['@_%s_%d' % (procname, i)
+                                       for i in range(len(args))]))
+        if isinstance(q, unicode):
+            q = q.encode(conn.charset)
+        self._query(q)
+        self._executed = q
+
+        return args
+
+    def fetchone(self):
+        ''' Fetch the next row '''
+        self._check_executed()
+        if self._rows is None or self.rownumber >= len(self._rows):
+            return None
+        result = self._rows[self.rownumber]
+        self.rownumber += 1
+        return result
+
+    def fetchmany(self, size=None):
+        ''' Fetch several rows '''
+        self._check_executed()
+        end = self.rownumber + (size or self.arraysize)
+        result = self._rows[self.rownumber:end]
+        if self._rows is None:
+            return None
+        self.rownumber = min(end, len(self._rows))
+        return result
+
+    def fetchall(self):
+        ''' Fetch all the rows '''
+        self._check_executed()
+        if self._rows is None:
+            return None
+        if self.rownumber:
+            result = self._rows[self.rownumber:]
+        else:
+            result = self._rows
+        self.rownumber = len(self._rows)
+        return result
+
+    def scroll(self, value, mode='relative'):
+        self._check_executed()
+        if mode == 'relative':
+            r = self.rownumber + value
+        elif mode == 'absolute':
+            r = value
+        else:
+            self.errorhandler(self, ProgrammingError,
+                    "unknown scroll mode %s" % mode)
+
+        if r < 0 or r >= len(self._rows):
+            self.errorhandler(self, IndexError, "out of range")
+        self.rownumber = r
+
+    def _query(self, q):
+        conn = self._get_db()
+        self._last_executed = q
+        conn.query(q)
+        self._do_get_result()
+        return self.rowcount
+
+    def _do_get_result(self):
+        conn = self._get_db()
+        self.rowcount = conn._result.affected_rows
+
+        self.rownumber = 0
+        self.description = conn._result.description
+        self.lastrowid = conn._result.insert_id
+        self._rows = conn._result.rows
+        self._has_next = conn._result.has_next
+        conn._result = None
+
+    def __iter__(self):
+        self._check_executed()
+        result = self.rownumber and self._rows[self.rownumber:] or self._rows
+        return iter(result)
+
+    Warning = Warning
+    Error = Error
+    InterfaceError = InterfaceError
+    DatabaseError = DatabaseError
+    DataError = DataError
+    OperationalError = OperationalError
+    IntegrityError = IntegrityError
+    InternalError = InternalError
+    ProgrammingError = ProgrammingError
+    NotSupportedError = NotSupportedError

ADDED   gluon/contrib/pymysql/err.py
Index: gluon/contrib/pymysql/err.py
==================================================================
--- /dev/null
+++ gluon/contrib/pymysql/err.py
@@ -0,0 +1,140 @@
+import struct
+
+
+try:
+    Exception, Warning
+except ImportError:
+    try:
+        from exceptions import Exception, Warning
+    except ImportError:
+        import sys
+        e = sys.modules['exceptions']
+        Exception = e.Exception
+        Warning = e.Warning
+    
+from constants import ER
+
+class MySQLError(Exception):
+    
+    """Exception related to operation with MySQL."""
+
+
+class Warning(Warning, MySQLError):
+
+    """Exception raised for important warnings like data truncations
+    while inserting, etc."""
+
+class Error(MySQLError):
+
+    """Exception that is the base class of all other error exceptions
+    (not Warning)."""
+
+
+class InterfaceError(Error):
+
+    """Exception raised for errors that are related to the database
+    interface rather than the database itself."""
+
+
+class DatabaseError(Error):
+
+    """Exception raised for errors that are related to the
+    database."""
+
+
+class DataError(DatabaseError):
+
+    """Exception raised for errors that are due to problems with the
+    processed data like division by zero, numeric value out of range,
+    etc."""
+
+
+class OperationalError(DatabaseError):
+
+    """Exception raised for errors that are related to the database's
+    operation and not necessarily under the control of the programmer,
+    e.g. an unexpected disconnect occurs, the data source name is not
+    found, a transaction could not be processed, a memory allocation
+    error occurred during processing, etc."""
+
+
+class IntegrityError(DatabaseError):
+
+    """Exception raised when the relational integrity of the database
+    is affected, e.g. a foreign key check fails, duplicate key,
+    etc."""
+
+
+class InternalError(DatabaseError):
+
+    """Exception raised when the database encounters an internal
+    error, e.g. the cursor is not valid anymore, the transaction is
+    out of sync, etc."""
+
+
+class ProgrammingError(DatabaseError):
+
+    """Exception raised for programming errors, e.g. table not found
+    or already exists, syntax error in the SQL statement, wrong number
+    of parameters specified, etc."""
+
+
+class NotSupportedError(DatabaseError):
+
+    """Exception raised in case a method or database API was used
+    which is not supported by the database, e.g. requesting a
+    .rollback() on a connection that does not support transaction or
+    has transactions turned off."""
+
+
+error_map = {}
+
+def _map_error(exc, *errors):
+    for error in errors:
+        error_map[error] = exc
+
+_map_error(ProgrammingError, ER.DB_CREATE_EXISTS, ER.SYNTAX_ERROR,
+           ER.PARSE_ERROR, ER.NO_SUCH_TABLE, ER.WRONG_DB_NAME,
+           ER.WRONG_TABLE_NAME, ER.FIELD_SPECIFIED_TWICE,
+           ER.INVALID_GROUP_FUNC_USE, ER.UNSUPPORTED_EXTENSION,
+           ER.TABLE_MUST_HAVE_COLUMNS, ER.CANT_DO_THIS_DURING_AN_TRANSACTION)
+_map_error(DataError, ER.WARN_DATA_TRUNCATED, ER.WARN_NULL_TO_NOTNULL,
+           ER.WARN_DATA_OUT_OF_RANGE, ER.NO_DEFAULT, ER.PRIMARY_CANT_HAVE_NULL,
+           ER.DATA_TOO_LONG, ER.DATETIME_FUNCTION_OVERFLOW)
+_map_error(IntegrityError, ER.DUP_ENTRY, ER.NO_REFERENCED_ROW,
+           ER.NO_REFERENCED_ROW_2, ER.ROW_IS_REFERENCED, ER.ROW_IS_REFERENCED_2,
+           ER.CANNOT_ADD_FOREIGN)
+_map_error(NotSupportedError, ER.WARNING_NOT_COMPLETE_ROLLBACK,
+           ER.NOT_SUPPORTED_YET, ER.FEATURE_DISABLED, ER.UNKNOWN_STORAGE_ENGINE)
+
+del _map_error, ER
+
+    
+def _get_error_info(data):
+    errno = struct.unpack('<h', data[1:3])[0]
+    if data[3] == "#":
+        # version 4.1
+        sqlstate = data[4:9].decode("utf8")
+        errorvalue = data[9:].decode("utf8")
+        return (errno, sqlstate, errorvalue)
+    else:
+        # version 4.0
+        return (errno, None, data[3:].decode("utf8"))
+
+def _check_mysql_exception(errinfo):
+    errno, sqlstate, errorvalue = errinfo 
+    errorclass = error_map.get(errno, None)
+    if errorclass:
+        raise errorclass, (errno,errorvalue)
+
+    # couldn't find the right error number
+    raise InternalError, (errno, errorvalue)
+
+def raise_mysql_exception(data):
+    errinfo = _get_error_info(data)
+    _check_mysql_exception(errinfo)
+    
+
+
+
+

ADDED   gluon/contrib/pymysql/tests/__init__.py
Index: gluon/contrib/pymysql/tests/__init__.py
==================================================================
--- /dev/null
+++ gluon/contrib/pymysql/tests/__init__.py
@@ -0,0 +1,7 @@
+from pymysql.tests.test_issues import *
+from pymysql.tests.test_example import *
+from pymysql.tests.test_basic import *
+
+if __name__ == "__main__":
+    import unittest
+    unittest.main()

ADDED   gluon/contrib/pymysql/tests/base.py
Index: gluon/contrib/pymysql/tests/base.py
==================================================================
--- /dev/null
+++ gluon/contrib/pymysql/tests/base.py
@@ -0,0 +1,19 @@
+import pymysql
+import unittest
+
+class PyMySQLTestCase(unittest.TestCase):
+    databases = [
+        {"host":"localhost","user":"root",
+         "passwd":"","db":"test_pymysql", "use_unicode": True},
+        {"host":"localhost","user":"root","passwd":"","db":"test_pymysql2"}]
+
+    def setUp(self):
+        self.connections = []
+
+        for params in self.databases:
+            self.connections.append(pymysql.connect(**params))
+
+    def tearDown(self):
+        for connection in self.connections:
+            connection.close()
+

ADDED   gluon/contrib/pymysql/tests/test_basic.py
Index: gluon/contrib/pymysql/tests/test_basic.py
==================================================================
--- /dev/null
+++ gluon/contrib/pymysql/tests/test_basic.py
@@ -0,0 +1,141 @@
+from pymysql.tests import base
+from pymysql import util
+
+import time
+import datetime
+
+class TestConversion(base.PyMySQLTestCase):
+    def test_datatypes(self):
+        """ test every data type """
+        conn = self.connections[0]
+        c = conn.cursor()
+        c.execute("create table test_datatypes (b bit, i int, l bigint, f real, s varchar(32), u varchar(32), bb blob, d date, dt datetime, ts timestamp, td time, t time, st datetime)")
+        try:
+            # insert values
+            v = (True, -3, 123456789012, 5.7, "hello'\" world", u"Espa\xc3\xb1ol", "binary\x00data".encode(conn.charset), datetime.date(1988,2,2), datetime.datetime.now(), datetime.timedelta(5,6), datetime.time(16,32), time.localtime())
+            c.execute("insert into test_datatypes (b,i,l,f,s,u,bb,d,dt,td,t,st) values (%s,%s,%s,%s,%s,%s,%s,%s,%s,%s,%s,%s)", v)
+            c.execute("select b,i,l,f,s,u,bb,d,dt,td,t,st from test_datatypes")
+            r = c.fetchone()
+            self.assertEqual(util.int2byte(1), r[0])
+            self.assertEqual(v[1:8], r[1:8])
+            # mysql throws away microseconds so we need to check datetimes
+            # specially. additionally times are turned into timedeltas.
+            self.assertEqual(datetime.datetime(*v[8].timetuple()[:6]), r[8])
+            self.assertEqual(v[9], r[9]) # just timedeltas
+            self.assertEqual(datetime.timedelta(0, 60 * (v[10].hour * 60 + v[10].minute)), r[10])
+            self.assertEqual(datetime.datetime(*v[-1][:6]), r[-1])
+
+            c.execute("delete from test_datatypes")
+
+            # check nulls
+            c.execute("insert into test_datatypes (b,i,l,f,s,u,bb,d,dt,td,t,st) values (%s,%s,%s,%s,%s,%s,%s,%s,%s,%s,%s,%s)", [None] * 12)
+            c.execute("select b,i,l,f,s,u,bb,d,dt,td,t,st from test_datatypes")
+            r = c.fetchone()
+            self.assertEqual(tuple([None] * 12), r)
+
+            c.execute("delete from test_datatypes")
+
+            # check sequence type
+            c.execute("insert into test_datatypes (i, l) values (2,4), (6,8), (10,12)")
+            c.execute("select l from test_datatypes where i in %s order by i", ((2,6),))
+            r = c.fetchall()
+            self.assertEqual(((4,),(8,)), r)
+        finally:
+            c.execute("drop table test_datatypes")
+
+    def test_dict(self):
+        """ test dict escaping """
+        conn = self.connections[0]
+        c = conn.cursor()
+        c.execute("create table test_dict (a integer, b integer, c integer)")
+        try:
+            c.execute("insert into test_dict (a,b,c) values (%(a)s, %(b)s, %(c)s)", {"a":1,"b":2,"c":3})
+            c.execute("select a,b,c from test_dict")
+            self.assertEqual((1,2,3), c.fetchone())
+        finally:
+            c.execute("drop table test_dict")
+
+    def test_big_blob(self):
+        """ test tons of data """
+        conn = self.connections[0]
+        c = conn.cursor()
+        c.execute("create table test_big_blob (b blob)")
+        try:
+            data = "pymysql" * 1024
+            c.execute("insert into test_big_blob (b) values (%s)", (data,))
+            c.execute("select b from test_big_blob")
+            self.assertEqual(data.encode(conn.charset), c.fetchone()[0])
+        finally:
+            c.execute("drop table test_big_blob")
+
+class TestCursor(base.PyMySQLTestCase):
+    # this test case does not work quite right yet, however,
+    # we substitute in None for the erroneous field which is
+    # compatible with the DB-API 2.0 spec and has not broken
+    # any unit tests for anything we've tried.
+
+    #def test_description(self):
+    #    """ test description attribute """
+    #    # result is from MySQLdb module
+    #    r = (('Host', 254, 11, 60, 60, 0, 0),
+    #         ('User', 254, 16, 16, 16, 0, 0),
+    #         ('Password', 254, 41, 41, 41, 0, 0),
+    #         ('Select_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Insert_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Update_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Delete_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Create_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Drop_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Reload_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Shutdown_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Process_priv', 254, 1, 1, 1, 0, 0),
+    #         ('File_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Grant_priv', 254, 1, 1, 1, 0, 0),
+    #         ('References_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Index_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Alter_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Show_db_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Super_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Create_tmp_table_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Lock_tables_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Execute_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Repl_slave_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Repl_client_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Create_view_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Show_view_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Create_routine_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Alter_routine_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Create_user_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Event_priv', 254, 1, 1, 1, 0, 0),
+    #         ('Trigger_priv', 254, 1, 1, 1, 0, 0),
+    #         ('ssl_type', 254, 0, 9, 9, 0, 0),
+    #         ('ssl_cipher', 252, 0, 65535, 65535, 0, 0),
+    #         ('x509_issuer', 252, 0, 65535, 65535, 0, 0),
+    #         ('x509_subject', 252, 0, 65535, 65535, 0, 0),
+    #         ('max_questions', 3, 1, 11, 11, 0, 0),
+    #         ('max_updates', 3, 1, 11, 11, 0, 0),
+    #         ('max_connections', 3, 1, 11, 11, 0, 0),
+    #         ('max_user_connections', 3, 1, 11, 11, 0, 0))
+    #    conn = self.connections[0]
+    #    c = conn.cursor()
+    #    c.execute("select * from mysql.user")
+    #
+    #    self.assertEqual(r, c.description)
+
+    def test_fetch_no_result(self):
+        """ test a fetchone() with no rows """
+        conn = self.connections[0]
+        c = conn.cursor()
+        c.execute("create table test_nr (b varchar(32))")
+        try:
+            data = "pymysql"
+            c.execute("insert into test_nr (b) values (%s)", (data,))
+            self.assertEqual(None, c.fetchone())
+        finally:
+            c.execute("drop table test_nr")
+
+__all__ = ["TestConversion","TestCursor"]
+
+if __name__ == "__main__":
+    import unittest
+    unittest.main()

ADDED   gluon/contrib/pymysql/tests/test_example.py
Index: gluon/contrib/pymysql/tests/test_example.py
==================================================================
--- /dev/null
+++ gluon/contrib/pymysql/tests/test_example.py
@@ -0,0 +1,32 @@
+import pymysql
+from pymysql.tests import base
+
+class TestExample(base.PyMySQLTestCase):
+    def test_example(self):
+        conn = pymysql.connect(host='127.0.0.1', port=3306, user='root', passwd='', db='mysql')
+   
+
+        cur = conn.cursor()
+
+        cur.execute("SELECT Host,User FROM user")
+
+        # print cur.description
+
+        # r = cur.fetchall()
+        # print r
+        # ...or...
+        u = False
+
+        for r in cur.fetchall():
+            u = u or conn.user in r
+
+        self.assertTrue(u)
+
+        cur.close()
+        conn.close()
+
+__all__ = ["TestExample"]
+
+if __name__ == "__main__":
+    import unittest
+    unittest.main()

ADDED   gluon/contrib/pymysql/tests/test_issues.py
Index: gluon/contrib/pymysql/tests/test_issues.py
==================================================================
--- /dev/null
+++ gluon/contrib/pymysql/tests/test_issues.py
@@ -0,0 +1,240 @@
+import pymysql
+from pymysql.tests import base
+
+import sys
+
+try:
+    import imp
+    reload = imp.reload
+except AttributeError:
+    pass
+
+import datetime
+
+class TestOldIssues(base.PyMySQLTestCase):
+    def test_issue_3(self):
+        """ undefined methods datetime_or_None, date_or_None """
+        conn = self.connections[0]
+        c = conn.cursor()
+        c.execute("create table issue3 (d date, t time, dt datetime, ts timestamp)")
+        try:
+            c.execute("insert into issue3 (d, t, dt, ts) values (%s,%s,%s,%s)", (None, None, None, None))
+            c.execute("select d from issue3")
+            self.assertEqual(None, c.fetchone()[0])
+            c.execute("select t from issue3")
+            self.assertEqual(None, c.fetchone()[0])
+            c.execute("select dt from issue3")
+            self.assertEqual(None, c.fetchone()[0])
+            c.execute("select ts from issue3")
+            self.assertTrue(isinstance(c.fetchone()[0], datetime.datetime))
+        finally:
+            c.execute("drop table issue3")
+
+    def test_issue_4(self):
+        """ can't retrieve TIMESTAMP fields """
+        conn = self.connections[0]
+        c = conn.cursor()
+        c.execute("create table issue4 (ts timestamp)")
+        try:
+            c.execute("insert into issue4 (ts) values (now())")
+            c.execute("select ts from issue4")
+            self.assertTrue(isinstance(c.fetchone()[0], datetime.datetime))
+        finally:
+            c.execute("drop table issue4")
+
+    def test_issue_5(self):
+        """ query on information_schema.tables fails """
+        con = self.connections[0]
+        cur = con.cursor()
+        cur.execute("select * from information_schema.tables")
+
+    def test_issue_6(self):
+        """ exception: TypeError: ord() expected a character, but string of length 0 found """
+        conn = pymysql.connect(host="localhost",user="root",passwd="",db="mysql")
+        c = conn.cursor()
+        c.execute("select * from user")
+        conn.close()
+
+    def test_issue_8(self):
+        """ Primary Key and Index error when selecting data """
+        conn = self.connections[0]
+        c = conn.cursor()
+        c.execute("""CREATE TABLE `test` (`station` int(10) NOT NULL DEFAULT '0', `dh`
+datetime NOT NULL DEFAULT '0000-00-00 00:00:00', `echeance` int(1) NOT NULL
+DEFAULT '0', `me` double DEFAULT NULL, `mo` double DEFAULT NULL, PRIMARY
+KEY (`station`,`dh`,`echeance`)) ENGINE=MyISAM DEFAULT CHARSET=latin1;""")
+        try:
+            self.assertEqual(0, c.execute("SELECT * FROM test"))
+            c.execute("ALTER TABLE `test` ADD INDEX `idx_station` (`station`)")
+            self.assertEqual(0, c.execute("SELECT * FROM test"))
+        finally:
+            c.execute("drop table test")
+
+    def test_issue_9(self):
+        """ sets DeprecationWarning in Python 2.6 """
+        try:
+            reload(pymysql)
+        except DeprecationWarning:
+            self.fail()
+
+    def test_issue_10(self):
+        """ Allocate a variable to return when the exception handler is permissive """
+        conn = self.connections[0]
+        conn.errorhandler = lambda cursor, errorclass, errorvalue: None
+        cur = conn.cursor()
+        cur.execute( "create table t( n int )" )
+        cur.execute( "create table t( n int )" )
+
+    def test_issue_13(self):
+        """ can't handle large result fields """
+        conn = self.connections[0]
+        cur = conn.cursor()
+        cur.execute("create table issue13 (t text)")
+        try:
+            # ticket says 18k
+            size = 18*1024
+            cur.execute("insert into issue13 (t) values (%s)", ("x" * size,))
+            cur.execute("select t from issue13")
+            # use assert_ so that obscenely huge error messages don't print
+            r = cur.fetchone()[0]
+            self.assert_("x" * size == r)
+        finally:
+            cur.execute("drop table issue13")
+
+    def test_issue_14(self):
+        """ typo in converters.py """
+        self.assertEqual('1', pymysql.converters.escape_item(1, "utf8"))
+        self.assertEqual('1', pymysql.converters.escape_item(1L, "utf8"))
+
+        self.assertEqual('1', pymysql.converters.escape_object(1))
+        self.assertEqual('1', pymysql.converters.escape_object(1L))
+
+    def test_issue_15(self):
+        """ query should be expanded before perform character encoding """
+        conn = self.connections[0]
+        c = conn.cursor()
+        c.execute("create table issue15 (t varchar(32))")
+        try:
+            c.execute("insert into issue15 (t) values (%s)", (u'\xe4\xf6\xfc'))
+            c.execute("select t from issue15")
+            self.assertEqual(u'\xe4\xf6\xfc', c.fetchone()[0])
+        finally:
+            c.execute("drop table issue15")
+
+    def test_issue_16(self):
+        """ Patch for string and tuple escaping """
+        conn = self.connections[0]
+        c = conn.cursor()
+        c.execute("create table issue16 (name varchar(32) primary key, email varchar(32))")
+        try:
+            c.execute("insert into issue16 (name, email) values ('pete', 'floydophone')")
+            c.execute("select email from issue16 where name=%s", ("pete",))
+            self.assertEqual("floydophone", c.fetchone()[0])
+        finally:
+            c.execute("drop table issue16")
+
+    def test_issue_17(self):
+        """ could not connect mysql use passwod """
+        conn = self.connections[0]
+        host = self.databases[0]["host"]
+        db = self.databases[0]["db"]
+        c = conn.cursor()
+        # grant access to a table to a user with a password
+        try:
+            c.execute("create table issue17 (x varchar(32) primary key)")
+            c.execute("insert into issue17 (x) values ('hello, world!')")
+            c.execute("grant all privileges on %s.issue17 to 'issue17user'@'%%' identified by '1234'" % db)
+            conn.commit()
+            
+            conn2 = pymysql.connect(host=host, user="issue17user", passwd="1234", db=db)
+            c2 = conn2.cursor()
+            c2.execute("select x from issue17")
+            self.assertEqual("hello, world!", c2.fetchone()[0])
+        finally:
+            c.execute("drop table issue17")
+
+def _uni(s, e):
+    # hack for py3
+    if sys.version_info[0] > 2:
+        return unicode(bytes(s, sys.getdefaultencoding()), e)
+    else:
+        return unicode(s, e)
+
+class TestNewIssues(base.PyMySQLTestCase):
+    def test_issue_34(self):
+        try:
+            pymysql.connect(host="localhost", port=1237, user="root")
+            self.fail()
+        except pymysql.OperationalError, e:
+            self.assertEqual(2003, e.args[0])
+        except:
+            self.fail()
+
+    def test_issue_33(self):
+        conn = pymysql.connect(host="localhost", user="root", db=self.databases[0]["db"], charset="utf8")
+        c = conn.cursor()
+        try:
+            c.execute(_uni("create table hei\xc3\x9fe (name varchar(32))", "utf8"))
+            c.execute(_uni("insert into hei\xc3\x9fe (name) values ('Pi\xc3\xb1ata')", "utf8"))
+            c.execute(_uni("select name from hei\xc3\x9fe", "utf8"))
+            self.assertEqual(_uni("Pi\xc3\xb1ata","utf8"), c.fetchone()[0])
+        finally:
+            c.execute(_uni("drop table hei\xc3\x9fe", "utf8"))
+
+    # Will fail without manual intervention:
+    #def test_issue_35(self):
+    #
+    #    conn = self.connections[0]
+    #    c = conn.cursor()
+    #    print "sudo killall -9 mysqld within the next 10 seconds"
+    #    try:
+    #        c.execute("select sleep(10)")
+    #        self.fail()
+    #    except pymysql.OperationalError, e:
+    #        self.assertEqual(2013, e.args[0])
+
+    def test_issue_36(self):
+        conn = self.connections[0]
+        c = conn.cursor()
+        # kill connections[0]
+        original_count = c.execute("show processlist")
+        kill_id = None
+        for id,user,host,db,command,time,state,info in c.fetchall():
+            if info == "show processlist":
+                kill_id = id
+                break
+        # now nuke the connection
+        conn.kill(kill_id)
+        # make sure this connection has broken
+        try:
+            c.execute("show tables")
+            self.fail()
+        except:
+            pass
+        # check the process list from the other connection
+        self.assertEqual(original_count - 1, self.connections[1].cursor().execute("show processlist"))
+        del self.connections[0]
+
+    def test_issue_37(self):
+        conn = self.connections[0]
+        c = conn.cursor()
+        self.assertEqual(1, c.execute("SELECT @foo"))
+        self.assertEqual((None,), c.fetchone())
+        self.assertEqual(0, c.execute("SET @foo = 'bar'"))
+        c.execute("set @foo = 'bar'")
+
+    def test_issue_38(self):
+        conn = self.connections[0]
+        c = conn.cursor()
+        datum = "a" * 1024 * 1023 # reduced size for most default mysql installs
+        
+        try:
+            c.execute("create table issue38 (id integer, data mediumblob)")
+            c.execute("insert into issue38 values (1, %s)", datum)
+        finally:
+            c.execute("drop table issue38")
+__all__ = ["TestOldIssues", "TestNewIssues"]
+
+if __name__ == "__main__":
+    import unittest
+    unittest.main()

ADDED   gluon/contrib/pymysql/times.py
Index: gluon/contrib/pymysql/times.py
==================================================================
--- /dev/null
+++ gluon/contrib/pymysql/times.py
@@ -0,0 +1,16 @@
+from time import localtime
+from datetime import date, datetime, time, timedelta
+
+Date = date
+Time = time
+TimeDelta = timedelta
+Timestamp = datetime
+
+def DateFromTicks(ticks):
+    return date(*localtime(ticks)[:3])
+
+def TimeFromTicks(ticks):
+    return time(*localtime(ticks)[3:6])
+
+def TimestampFromTicks(ticks):
+    return datetime(*localtime(ticks)[:6])

ADDED   gluon/contrib/pymysql/util.py
Index: gluon/contrib/pymysql/util.py
==================================================================
--- /dev/null
+++ gluon/contrib/pymysql/util.py
@@ -0,0 +1,19 @@
+import struct
+
+def byte2int(b):
+    if isinstance(b, int):
+        return b
+    else:
+        return struct.unpack("!B", b)[0]
+
+def int2byte(i):
+    return struct.pack("!B", i)
+
+def join_bytes(bs):
+    if len(bs) == 0:
+        return ""
+    else:
+        rv = bs[0]
+        for b in bs[1:]:
+            rv += b
+        return rv

ADDED   gluon/contrib/pyrtf/Constants.py
Index: gluon/contrib/pyrtf/Constants.py
==================================================================
--- /dev/null
+++ gluon/contrib/pyrtf/Constants.py
@@ -0,0 +1,157 @@
+class ViewKind :
+    """An integer (0-5) that represents the view mode of the document."""
+
+    NONE           = 0
+    PageLayout     = 1
+    Outline        = 2
+    MasterDocument = 3
+    Normal         = 4
+    OnlineLayout   = 5
+
+    DEFAULT = PageLayout
+
+    def _IsValid( cls, value ) :
+        return value in [ 0, 1, 2, 3, 4, 5 ]
+    IsValid = classmethod( _IsValid )
+
+class ViewScale :
+    """Zoom level of the document; the N argument is a value representing a percentage (the default is 100)."""
+
+    def _IsValid( cls, value ) :
+        return value is None or (0 < value < 101)
+    IsValid = classmethod( _IsValid )
+
+class ViewZoomKind :
+    """An integer (0 to 2) that represents the zoom kind of the document."""
+
+    NONE     = 0
+    FullPage = 1
+    BestFit  = 2
+
+    def _IsValid( cls, value ) :
+        return value in [ None, 0, 1, 2 ]
+    IsValid = classmethod( _IsValid )
+
+
+class Languages :
+    NoLanguage            = 1024
+    Albanian              = 1052
+    Arabic                = 1025
+    Bahasa                = 1057
+    BelgianDutch          = 2067
+    BelgianFrench         = 2060
+    BrazilianPortuguese   = 1046
+    Bulgarian             = 1026
+    Catalan               = 1027
+    CroatoSerbianLatin    = 1050
+    Czech                 = 1029
+    Danish                = 1030
+    Dutch                 = 1043
+    EnglishAustralian     = 3081
+    EnglishUK             = 2057
+    EnglishUS             = 1033
+    Finnish               = 1035
+    French                = 1036
+    FrenchCanadian        = 3084
+    German                = 1031
+    Greek                 = 1032
+    Hebrew                = 1037
+    Hungarian             = 1038
+    Icelandic             = 1039
+    Italian               = 1040
+    Japanese              = 1041
+    Korean                = 1042
+    NorwegianBokmal       = 1044
+    NorwegianNynorsk      = 2068
+    Polish                = 1045
+    Portuguese            = 2070
+    RhaetoRomanic         = 1047
+    Romanian              = 1048
+    Russian               = 1049
+    SerboCroatianCyrillic = 2074
+    SimplifiedChinese     = 2052
+    Slovak                = 1051
+    SpanishCastilian      = 1034
+    SpanishMexican        = 2058
+    Swedish               = 1053
+    SwissFrench           = 4108
+    SwissGerman           = 2055
+    SwissItalian          = 2064
+    Thai                  = 1054
+    TraditionalChinese    = 1028
+    Turkish               = 1055
+    Urdu                  = 1056
+    SesothoSotho          = 1072
+    Afrikaans             = 1078
+    Zulu                  = 1077
+    Xhosa                 = 1076
+    Venda                 = 1075
+    Tswana                = 1074
+    Tsonga                = 1073
+    FarsiPersian          = 1065
+
+    Codes = [ 1024,
+              1052,
+              1025,
+              1057,
+              2067,
+              2060,
+              1046,
+              1026,
+              1027,
+              1050,
+              1029,
+              1030,
+              1043,
+              3081,
+              2057,
+              1033,
+              1035,
+              1036,
+              3084,
+              1031,
+              1032,
+              1037,
+              1038,
+              1039,
+              1040,
+              1041,
+              1042,
+              1044,
+              2068,
+              1045,
+              2070,
+              1047,
+              1048,
+              1049,
+              2074,
+              2052,
+              1051,
+              1034,
+              2058,
+              1053,
+              4108,
+              2055,
+              2064,
+              1054,
+              1028,
+              1055,
+              1056,
+              1072,
+              1078,
+              1077,
+              1076,
+              1075,
+              1074,
+              1073,
+              1065 ]
+
+    #  make it Australian as that is what I use most of the time
+    DEFAULT = EnglishAustralian
+
+    def _IsValid( cls, value ) :
+        return value in cls.Codes
+    IsValid = classmethod( _IsValid )
+
+if __name__ == '__main__' :
+    PrintHexTable()

ADDED   gluon/contrib/pyrtf/Elements.py
Index: gluon/contrib/pyrtf/Elements.py
==================================================================
--- /dev/null
+++ gluon/contrib/pyrtf/Elements.py
@@ -0,0 +1,756 @@
+from    types       import  IntType, FloatType, LongType, StringTypes
+from    copy        import  deepcopy
+from    binascii    import  hexlify
+
+from    Constants   import  *
+from    Styles      import  *
+
+class UnhandledParamError( Exception ) :
+    def __init__( self, param ) :
+        Exception.__init__( self, "Don't know what to do with param %s" % param )
+
+#                                               red green blue
+StandardColours = Colours()
+StandardColours.append( Colour( 'Black',         0,    0,   0 ) )
+StandardColours.append( Colour( 'Blue',          0,    0, 255 ) )
+StandardColours.append( Colour( 'Turquoise',     0,  255, 255 ) )
+StandardColours.append( Colour( 'Green',         0,  255,   0 ) )
+StandardColours.append( Colour( 'Pink',        255,    0, 255 ) )
+StandardColours.append( Colour( 'Red',         255,    0,   0 ) )
+StandardColours.append( Colour( 'Yellow',      255,  255,   0 ) )
+StandardColours.append( Colour( 'White',       255,  255, 255 ) )
+StandardColours.append( Colour( 'Blue Dark',     0,    0, 128 ) )
+StandardColours.append( Colour( 'Teal',          0,  128, 128 ) )
+StandardColours.append( Colour( 'Green Dark',    0,  128,   0 ) )
+StandardColours.append( Colour( 'Violet',      128,    0, 128 ) )
+StandardColours.append( Colour( 'Red Dark',    128,    0,   0 ) )
+StandardColours.append( Colour( 'Yellow Dark', 128,  128,   0 ) )
+StandardColours.append( Colour( 'Grey Dark',   128,  128, 128 ) )
+StandardColours.append( Colour( 'Grey',        192,  192, 192 ) )
+
+StandardFonts = Fonts()
+StandardFonts.append( Font( 'Arial'                   , 'swiss' , 0, 2, '020b0604020202020204' ) )
+StandardFonts.append( Font( 'Arial Black'             , 'swiss' , 0, 2, '020b0a04020102020204' ) )
+StandardFonts.append( Font( 'Arial Narrow'            , 'swiss' , 0, 2, '020b0506020202030204' ) )
+StandardFonts.append( Font( 'Bitstream Vera Sans Mono', 'modern', 0, 1, '020b0609030804020204' ) )
+StandardFonts.append( Font( 'Bitstream Vera Sans'     , 'swiss' , 0, 2, '020b0603030804020204' ) )
+StandardFonts.append( Font( 'Bitstream Vera Serif'    , 'roman' , 0, 2, '02060603050605020204' ) )
+StandardFonts.append( Font( 'Book Antiqua'            , 'roman' , 0, 2, '02040602050305030304' ) )
+StandardFonts.append( Font( 'Bookman Old Style'       , 'roman' , 0, 2, '02050604050505020204' ) )
+StandardFonts.append( Font( 'Castellar'               , 'roman' , 0, 2, '020a0402060406010301' ) )
+StandardFonts.append( Font( 'Century Gothic'          , 'swiss' , 0, 2, '020b0502020202020204' ) )
+StandardFonts.append( Font( 'Comic Sans MS'           , 'script', 0, 2, '030f0702030302020204' ) )
+StandardFonts.append( Font( 'Courier New'             , 'modern', 0, 1, '02070309020205020404' ) )
+StandardFonts.append( Font( 'Franklin Gothic Medium'  , 'swiss' , 0, 2, '020b0603020102020204' ) )
+StandardFonts.append( Font( 'Garamond'                , 'roman' , 0, 2, '02020404030301010803' ) )
+StandardFonts.append( Font( 'Georgia'                 , 'roman' , 0, 2, '02040502050405020303' ) )
+StandardFonts.append( Font( 'Haettenschweiler'        , 'swiss' , 0, 2, '020b0706040902060204' ) )
+StandardFonts.append( Font( 'Impact'                  , 'swiss' , 0, 2, '020b0806030902050204' ) )
+StandardFonts.append( Font( 'Lucida Console'          , 'modern', 0, 1, '020b0609040504020204' ) )
+StandardFonts.append( Font( 'Lucida Sans Unicode'     , 'swiss' , 0, 2, '020b0602030504020204' ) )
+StandardFonts.append( Font( 'Microsoft Sans Serif'    , 'swiss' , 0, 2, '020b0604020202020204' ) )
+StandardFonts.append( Font( 'Monotype Corsiva'        , 'script', 0, 2, '03010101010201010101' ) )
+StandardFonts.append( Font( 'Palatino Linotype'       , 'roman' , 0, 2, '02040502050505030304' ) )
+StandardFonts.append( Font( 'Papyrus'                 , 'script', 0, 2, '03070502060502030205' ) )
+StandardFonts.append( Font( 'Sylfaen'                 , 'roman' , 0, 2, '010a0502050306030303' ) )
+StandardFonts.append( Font( 'Symbol'                  , 'roman' , 2, 2, '05050102010706020507' ) )
+StandardFonts.append( Font( 'Tahoma'                  , 'swiss' , 0, 2, '020b0604030504040204' ) )
+StandardFonts.append( Font( 'Times New Roman'         , 'roman' , 0, 2, '02020603050405020304' ) )
+StandardFonts.append( Font( 'Trebuchet MS'            , 'swiss' , 0, 2, '020b0603020202020204' ) )
+StandardFonts.append( Font( 'Verdana'                 , 'swiss' , 0, 2, '020b0604030504040204' ) )
+
+StandardFonts.Castellar.SetAlternate( StandardFonts.Georgia )
+
+"""
+Found the following definition at http://www.pbdr.com/vbtips/gen/convtwip.htm
+
+Twips are screen-independent units used to ensure that the placement and
+proportion of screen elements in your screen application are the same on all
+display systems. A twip is a unit of screen measurement equal to 1/20 of a
+printer's point. The conversion between twips and
+inches/centimeters/millimeters is as follows:
+
+There are approximately 1440 twips to a inch (the length of a screen item
+measuring one inch when printed).
+
+As there are 2.54 centimeters to 1 inch, then there are approximately 567
+twips to a centimeter (the length of a screen item measuring one centimeter
+when printed).
+
+Or in millimeters, as there are 25.4 millimeters to 1 inch, therefore there
+are approximately 56.7 twips to a millimeter (the length of a screen item
+measuring one millimeter when printed)."""
+
+# Width default is 12240, Height default is 15840
+StandardPaper = Papers()
+StandardPaper.append( Paper( 'LETTER'             ,  1,  'Letter 8 1/2 x 11 in'               ,   12240,  15840 ) )
+StandardPaper.append( Paper( 'LETTERSMALL'        ,  2,  'Letter Small 8 1/2 x 11 in'         ,   12240,  15840 ) )
+StandardPaper.append( Paper( 'TABLOID'            ,  3,  'Tabloid 11 x 17 in'                 ,   15840,  24480 ) )
+StandardPaper.append( Paper( 'LEDGER'             ,  4,  'Ledger 17 x 11 in'                  ,   24480,  15840 ) )
+StandardPaper.append( Paper( 'LEGAL'              ,  5,  'Legal 8 1/2 x 14 in'                ,   12240,  20160 ) )
+StandardPaper.append( Paper( 'STATEMENT'          ,  6,  'Statement 5 1/2 x 8 1/2 in'         ,    7920,  12240 ) )
+StandardPaper.append( Paper( 'EXECUTIVE'          ,  7,  'Executive 7 1/4 x 10 1/2 in'        ,   10440,  15120 ) )
+StandardPaper.append( Paper( 'A3'                 ,  8,  'A3 297 x 420 mm'                    ,   16838,  23811 ) )
+StandardPaper.append( Paper( 'A4'                 ,  9,  'A4 210 x 297 mm'                    ,   11907,  16838 ) )
+StandardPaper.append( Paper( 'A4SMALL'            , 10,  'A4 Small 210 x 297 mm'              ,   11907,  16838 ) )
+StandardPaper.append( Paper( 'A5'                 , 11,  'A5 148 x 210 mm'                    ,    8391,  11907 ) )
+StandardPaper.append( Paper( 'B4'                 , 12,  'B4 (JIS) 250 x 354'                 ,   14175,  20072 ) )
+StandardPaper.append( Paper( 'B5'                 , 13,  'B5 (JIS) 182 x 257 mm'              ,   10319,  14572 ) )
+StandardPaper.append( Paper( 'FOLIO'              , 14,  'Folio 8 1/2 x 13 in'                ,   12240,  18720 ) )
+StandardPaper.append( Paper( 'QUARTO'             , 15,  'Quarto 215 x 275 mm'                ,   12191,  15593 ) )
+StandardPaper.append( Paper( '10X14'              , 16,  '10x14 in'                           ,   14400,  20160 ) )
+StandardPaper.append( Paper( '11X17'              , 17,  '11x17 in'                           ,   15840,  24480 ) )
+StandardPaper.append( Paper( 'NOTE'               , 18,  'Note 8 1/2 x 11 in'                 ,   12240,  15840 ) )
+StandardPaper.append( Paper( 'ENV_9'              , 19,  'Envelope #9 3 7/8 x 8 7/8'          ,    5580,  12780 ) )
+StandardPaper.append( Paper( 'ENV_10'             , 20,  'Envelope #10 4 1/8 x 9 1/2'         ,    5940,  13680 ) )
+StandardPaper.append( Paper( 'ENV_11'             , 21,  'Envelope #11 4 1/2 x 10 3/8'        ,    6480,  14940 ) )
+StandardPaper.append( Paper( 'ENV_12'             , 22,  'Envelope #12 4 3/4 x 11'            ,    6840,  15840 ) )
+StandardPaper.append( Paper( 'ENV_14'             , 23,  'Envelope #14 5 x 11 1/2'            ,    7200,  16560 ) )
+StandardPaper.append( Paper( 'CSHEET'             , 24,  'C size sheet 18 x 24 in'            ,   29520,  34560 ) )
+StandardPaper.append( Paper( 'DSHEET'             , 25,  'D size sheet 22 x 34 in'            ,   31680,  48960 ) )
+StandardPaper.append( Paper( 'ESHEET'             , 26,  'E size sheet 34 x 44 in'            ,   48960,  63360 ) )
+StandardPaper.append( Paper( 'ENV_DL'             , 27,  'Envelope DL 110 x 220mm'            ,    6237,  12474 ) )
+StandardPaper.append( Paper( 'ENV_C5'             , 28,  'Envelope C5 162 x 229 mm'           ,    9185,  12984 ) )
+StandardPaper.append( Paper( 'ENV_C3'             , 29,  'Envelope C3  324 x 458 mm'          ,   18371,  25969 ) )
+StandardPaper.append( Paper( 'ENV_C4'             , 30,  'Envelope C4  229 x 324 mm'          ,   12984,  18371 ) )
+StandardPaper.append( Paper( 'ENV_C6'             , 31,  'Envelope C6  114 x 162 mm'          ,    6464,   9185 ) )
+StandardPaper.append( Paper( 'ENV_C65'            , 32,  'Envelope C65 114 x 229 mm'          ,    6464,  12984 ) )
+StandardPaper.append( Paper( 'ENV_B4'             , 33,  'Envelope B4  250 x 353 mm'          ,   14175,  20015 ) )
+StandardPaper.append( Paper( 'ENV_B5'             , 34,  'Envelope B5  176 x 250 mm'          ,    9979,  14175 ) )
+StandardPaper.append( Paper( 'ENV_B6'             , 35,  'Envelope B6  176 x 125 mm'          ,    9979,   7088 ) )
+StandardPaper.append( Paper( 'ENV_ITALY'          , 36,  'Envelope 110 x 230 mm'              ,    6237,  13041 ) )
+StandardPaper.append( Paper( 'ENV_MONARCH'        , 37,  'Envelope Monarch 3.875 x 7.5 in'    ,    5580,  10800 ) )
+StandardPaper.append( Paper( 'ENV_PERSONAL'       , 38,  '6 3/4 Envelope 3 5/8 x 6 1/2 in'    ,    5220,   9360 ) )
+StandardPaper.append( Paper( 'FANFOLD_US'         , 39,  'US Std Fanfold 14 7/8 x 11 in'      ,   21420,  15840 ) )
+StandardPaper.append( Paper( 'FANFOLD_STD_GERMAN' , 40,  'German Std Fanfold 8 1/2 x 12 in'   ,   12240,  17280 ) )
+StandardPaper.append( Paper( 'FANFOLD_LGL_GERMAN' , 41,  'German Legal Fanfold 8 1/2 x 13 in' ,   12240,  18720 ) )
+
+#
+#   Finally a StyleSheet in which all of this stuff is put together
+#
+class StyleSheet :
+    def __init__( self, colours=None, fonts=None ) :
+
+        self.Colours = colours or deepcopy( StandardColours )
+        self.Fonts   = fonts   or deepcopy( StandardFonts   )
+
+        self.TextStyles      = AttributedList()
+        self.ParagraphStyles = AttributedList()
+
+class Section( list ) :
+    NONE   = 1
+    COLUMN = 2
+    PAGE   = 3
+    EVEN   = 4
+    ODD    = 5
+    BREAK_TYPES = [ NONE, COLUMN, PAGE, EVEN, ODD ]
+
+    def __init__( self, paper=None, margins=None, break_type=None, headery=None, footery=None, landscape=None, first_page_number=None ) :
+        super( Section, self ).__init__()
+
+        self.Paper   = paper   or StandardPaper.A4
+        self.SetMargins( margins )
+
+        self.Header = []
+        self.Footer = []
+        self.FirstHeader = []
+        self.FirstFooter = []
+
+        self.SetBreakType( break_type or self.NONE )
+        self.SetHeaderY( headery )
+        self.SetFooterY( footery )
+        self.SetLandscape( landscape )
+        self.SetFirstPageNumber( first_page_number )
+
+    def TwipsToRightMargin( self ) :
+        return self.Paper.Width - ( self.Margins.Left + self.Margins.Right )
+
+    def SetMargins( self, value ) :
+        self.Margins = value or MarginsPropertySet( top=1000, left=1200, bottom=1000, right=1200 )
+        self.Width   = self.Paper.Width - ( self.Margins.Left + self.Margins.Right )
+
+    def SetBreakType( self, value ) :
+        assert value in self.BREAK_TYPES
+        self.BreakType = value
+        return self
+
+    def SetHeaderY( self, value ) :
+        self.HeaderY = value
+        return self
+
+    def SetFooterY( self, value ) :
+        self.FooterY = value
+        return self
+
+    def SetLandscape( self, value ) :
+        self.Landscape = False
+        if value : self.Landscape = True
+        return self
+
+    def SetFirstPageNumber( self, value ) :
+        self.FirstPageNumber = value
+        return self
+
+def MakeDefaultStyleSheet( ) :
+    result = StyleSheet()
+
+    NormalText = TextStyle( TextPropertySet( result.Fonts.Arial, 22 ) )
+
+    ps = ParagraphStyle( 'Normal',
+                         NormalText.Copy(),
+                         ParagraphPropertySet( space_before = 60,
+                                               space_after  = 60 ) )
+    result.ParagraphStyles.append( ps )
+
+    ps = ParagraphStyle( 'Normal Short',
+                         NormalText.Copy() )
+    result.ParagraphStyles.append( ps )
+
+    NormalText.TextPropertySet.SetSize( 32 )
+    ps = ParagraphStyle( 'Heading 1',
+                         NormalText.Copy(),
+                         ParagraphPropertySet( space_before = 240,
+                                               space_after  = 60 ) )
+    result.ParagraphStyles.append( ps )
+
+    NormalText.TextPropertySet.SetSize( 24 ).SetBold( True )
+    ps = ParagraphStyle( 'Heading 2',
+                         NormalText.Copy(),
+                         ParagraphPropertySet( space_before = 240,
+                                               space_after  = 60 ) )
+    result.ParagraphStyles.append( ps )
+
+    #   Add some more in that are based on the normal template but that
+    #   have some indenting set that makes them suitable for doing numbered
+    normal_numbered = result.ParagraphStyles.Normal.Copy()
+    normal_numbered.SetName( 'Normal Numbered' )
+    normal_numbered.ParagraphPropertySet.SetFirstLineIndent( TabPropertySet.DEFAULT_WIDTH * -1 )
+    normal_numbered.ParagraphPropertySet.SetLeftIndent     ( TabPropertySet.DEFAULT_WIDTH )
+
+    result.ParagraphStyles.append( normal_numbered )
+
+    normal_numbered2 = result.ParagraphStyles.Normal.Copy()
+    normal_numbered2.SetName( 'Normal Numbered 2' )
+    normal_numbered2.ParagraphPropertySet.SetFirstLineIndent( TabPropertySet.DEFAULT_WIDTH * -1 )
+    normal_numbered2.ParagraphPropertySet.SetLeftIndent     ( TabPropertySet.DEFAULT_WIDTH *  2 )
+
+    result.ParagraphStyles.append( normal_numbered2 )
+
+    ## LIST STYLES
+    for idx, indent in [ (1, TabPS.DEFAULT_WIDTH    ),
+                         (2, TabPS.DEFAULT_WIDTH * 2),
+                         (3, TabPS.DEFAULT_WIDTH * 3) ] :
+        indent = TabPropertySet.DEFAULT_WIDTH
+        ps = ParagraphStyle( 'List %s' % idx,
+                             TextStyle( TextPropertySet( result.Fonts.Arial, 22 ) ),
+                             ParagraphPropertySet( space_before = 60,
+                                                   space_after  = 60,
+                                                   first_line_indent = -indent,
+                                                   left_indent       = indent) )
+        result.ParagraphStyles.append( ps )
+
+    return result
+
+class TAB  : pass
+class LINE : pass
+
+class RawCode :
+    def __init__( self, data ) :
+        self.Data = data
+
+PAGE_NUMBER   = RawCode( r'{\field{\fldinst page}}'   )
+TOTAL_PAGES   = RawCode( r'{\field{\fldinst numpages}}' )
+SECTION_PAGES = RawCode( r'{\field{\fldinst sectionpages}}' )
+ARIAL_BULLET  = RawCode( r'{\f2\'95}' )
+
+def _get_jpg_dimensions( fin ):
+    """
+    converted from: http://dev.w3.org/cvsweb/Amaya/libjpeg/rdjpgcom.c?rev=1.2
+    """
+
+    M_SOF0   = chr( 0xC0 )  #   /* Start Of Frame N */
+    M_SOF1   = chr( 0xC1 )  #   /* N indicates which compression process */
+    M_SOF2   = chr( 0xC2 )  #   /* Only SOF0-SOF2 are now in common use */
+    M_SOF3   = chr( 0xC3 )  #
+    M_SOF5   = chr( 0xC5 )  #   /* NB: codes C4 and CC are NOT SOF markers */
+    M_SOF6   = chr( 0xC6 )  #
+    M_SOF7   = chr( 0xC7 )  #
+    M_SOF9   = chr( 0xC9 )  #
+    M_SOF10  = chr( 0xCA )  #
+    M_SOF11  = chr( 0xCB )  #
+    M_SOF13  = chr( 0xCD )  #
+    M_SOF14  = chr( 0xCE )  #
+    M_SOF15  = chr( 0xCF )  #
+    M_SOI    = chr( 0xD8 )  #   /* Start Of Image (beginning of datastream) */
+    M_EOI    = chr( 0xD9 )  #   /* End Of Image (end of datastream) */
+
+    M_FF = chr( 0xFF )
+
+    MARKERS = [ M_SOF0, M_SOF1,  M_SOF2,  M_SOF3,
+                M_SOF5, M_SOF6,  M_SOF7,  M_SOF9,
+                M_SOF10,M_SOF11, M_SOF13, M_SOF14,
+                M_SOF15 ]
+
+    def get_length() :
+        b1 = fin.read( 1 )
+        b2 = fin.read( 1 )
+        return (ord(b1) << 8) + ord(b2)
+
+    def next_marker() :
+        #  markers come straight after an 0xFF so skip everything
+        #  up to the first 0xFF that we find
+        while fin.read(1) != M_FF :
+            pass
+
+        #  there can be more than one 0xFF as they can be used
+        #  for padding so we are now looking for the first byte
+        #  that isn't an 0xFF, this will be the marker
+        while True :
+            result = fin.read(1)
+            if result != M_FF :
+                return result
+
+        raise Exception( 'Invalid JPEG' )
+
+    #  BODY OF THE FUNCTION
+    if not ((fin.read(1) == M_FF) and (fin.read(1) == M_SOI)) :
+        raise Exception( 'Invalid Jpeg' )
+
+    while True :
+        marker = next_marker()
+
+        #  the marker is always followed by two bytes representing the length of the data field
+        length = get_length ()
+        if length < 2 : raise Exception( "Erroneous JPEG marker length" )
+
+        #  if it is a compression process marker then it will contain the dimension of the image
+        if marker in MARKERS :
+            #  the next byte is the data precision, just skip it
+            fin.read(1)
+
+            #  bingo
+            image_height = get_length()
+            image_width  = get_length()
+            return image_width, image_height
+
+        #  just skip whatever data it contains
+        fin.read( length - 2 )
+
+    raise Exception( 'Invalid JPEG, end of stream reached' )
+
+
+_PNG_HEADER = '\x89\x50\x4e'
+def _get_png_dimensions( data ) :
+    if data[0:3] != _PNG_HEADER :
+        raise Exception( 'Invalid PNG image' )
+
+    width  = (ord(data[18]) * 256) + (ord(data[19]))
+    height = (ord(data[22]) * 256) + (ord(data[23]))
+    return width, height
+
+def _get_emf_dimensions( fin ):
+    import struct
+    def get_DWORD():
+        return struct.unpack("<L",fin.read(4))[0]
+    def get_LONG():
+        return struct.unpack("<l",fin.read(4))[0]
+    def get_WORD():
+        return struct.unpack("<H",fin.read(2))[0]
+    class Empty:
+        pass
+    header = Empty()
+    header.RecordType = get_DWORD()      # Record type
+    header.RecordSize = get_DWORD()      # Size of the record in bytes
+    header.BoundsLeft = get_LONG()       # Left inclusive bounds
+    header.BoundsTop = get_LONG()        # Top inclusive bounds
+    header.BoundsRight = get_LONG()      # Right inclusive bounds
+    header.BoundsBottom = get_LONG()     # Bottom inclusive bounds
+    header.FrameLeft = get_LONG()        # Left side of inclusive picture frame
+    header.FrameTop = get_LONG()         # Top side of inclusive picture frame
+    header.FrameRight = get_LONG()       # Right side of inclusive picture frame
+    header.FrameBottom = get_LONG()      # Bottom side of inclusive picture frame
+    header.Signature = get_DWORD()       # Signature ID (always 0x464D4520)
+    header.Version = get_DWORD()         # Version of the metafile
+    header.Size = get_DWORD()            # Size of the metafile in bytes
+    header.NumOfRecords = get_DWORD()    # Number of records in the metafile
+    header.NumOfHandles = get_WORD()     # Number of handles in the handle table
+    header.Reserved = get_WORD()         # Not used (always 0)
+    header.SizeOfDescrip = get_DWORD()   # Size of description string in WORDs
+    header.OffsOfDescrip = get_DWORD()   # Offset of description string in metafile
+    header.NumPalEntries = get_DWORD()   # Number of color palette entries
+    header.WidthDevPixels = get_LONG()   # Width of reference device in pixels
+    header.HeightDevPixels = get_LONG()  # Height of reference device in pixels
+    header.WidthDevMM = get_LONG()       # Width of reference device in millimeters
+    header.HeightDevMM = get_LONG()      # Height of reference device in millimeters
+
+    if 0:
+        klist = header.__dict__.keys()
+        klist.sort()
+        for k in klist:
+            print "%20s:%s" % (k,header.__dict__[k])
+
+    dw = header.FrameRight-header.FrameLeft
+    dh = header.FrameBottom-header.FrameTop
+
+    # convert from 0.01mm units to 1/72in units
+    return int(dw * 72.0/2540.0), int(dh * 72.0/2540.0)
+
+class Image( RawCode ) :
+
+    #  Need to add in the width and height in twips as it crashes
+    #  word xp with these values.  Still working out the most
+    #  efficient way of getting these values.
+    # \picscalex100\picscaley100\piccropl0\piccropr0\piccropt0\piccropb0
+    # picwgoal900\pichgoal281
+
+    PNG_LIB = 'pngblip'
+    JPG_LIB = 'jpegblip'
+    EMF_LIB = 'emfblip'
+    PICT_TYPES = { 'png' : PNG_LIB,
+                   'jpg' : JPG_LIB,
+                   'emf' : EMF_LIB}
+
+    def __init__( self, infile, **kwargs ) :
+
+        if hasattr( infile, 'read' ):
+            fin = infile
+            if 'datatype' not in kwargs.keys():
+                msg = "If passing in a file object, you must also specify type='xxx' where xxx is one of %s" % self.PICT_TYPES.keys()
+                raise ValueError,msg
+            file_name = kwargs.pop('datatype')
+        else:
+            fin = file( infile, 'rb' )
+            file_name = infile
+
+        pict_type = self.PICT_TYPES[ file_name[ -3 : ].lower() ]
+        if pict_type == self.PNG_LIB :
+            width, height = _get_png_dimensions( fin.read( 100 ) )
+        elif pict_type == self.JPG_LIB :
+            width, height = _get_jpg_dimensions( fin )
+        elif pict_type == self.EMF_LIB :
+            width, height = _get_emf_dimensions( fin )
+
+
+        # if user specified height or width but not both, then
+        # scale unspecified dimension to maintain aspect ratio
+
+        if ('width' in kwargs) and ('height' not in kwargs):
+            height = int(height * float(kwargs['width'])/width)
+        elif ('height' in kwargs) and ('width' not in kwargs):
+            width = int(width * float(kwargs['height'])/height)
+
+        width  = kwargs.pop('width',width)
+        height = kwargs.pop('height', height)
+
+        codes = [ pict_type,
+                  'picwgoal%s' % (width  * 20),
+                  'pichgoal%s' % (height * 20) ]
+        # let user specify global scaling
+        scale = kwargs.pop('scale',100)
+
+        for kwarg, code, default in [ ( 'scale_x',     'scalex', scale ),
+                                      ( 'scale_y',     'scaley', scale ),
+                                      ( 'crop_left',   'cropl',    '0' ),
+                                      ( 'crop_right',  'cropr',    '0' ),
+                                      ( 'crop_top',    'cropt',    '0' ),
+                                      ( 'crop_bottom', 'cropb',    '0' ) ] :
+            codes.append( 'pic%s%s' % ( code, kwargs.pop( kwarg, default ) ) )
+
+
+        #  reset back to the start of the file to get all of it and now
+        #  turn it into hex.
+        fin.seek( 0, 0 )
+        image = hexlify( fin.read() )
+        fin.close()
+        data = []
+        for i in range( 0, len( image ), 128 ) :
+            data.append( image[ i : i + 128 ] )
+
+        data = r'{\pict{\%s}%s}' % ( '\\'.join( codes ), '\n'.join( data ) )
+        RawCode.__init__( self, data )
+
+    def ToRawCode( self, var_name ) :
+        return '%s = RawCode( """%s""" )' % ( var_name, self.Data )
+
+class Text :
+    def __init__( self, *params ) :
+        self.Data       = None
+        self.Style      = None
+        self.Properties = None
+        self.Shading    = None
+
+        for param in params :
+            if   isinstance( param, TextStyle  ) : self.Style      = param
+            elif isinstance( param, TextPS     ) : self.Properties = param
+            elif isinstance( param, ShadingPS  ) : self.Shading    = param
+            else :
+                #   otherwise let the rendering custom handler sort it out itself
+                self.Data = param
+
+    def SetData( self, value ) :
+        self.Data = value
+
+class Inline( list ) :
+    def __init__( self, *params ) :
+        super( Inline, self ).__init__()
+
+        self.Style      = None
+        self.Properties = None
+        self.Shading    = None
+
+        self._append = super( Inline, self ).append
+
+        for param in params :
+            if   isinstance( param, TextStyle  ) : self.Style      = param
+            elif isinstance( param, TextPS     ) : self.Properties = param
+            elif isinstance( param, ShadingPS  ) : self.Shading    = param
+            else :
+                #   otherwise we add to it to our list of elements and let
+                #   the rendering custom handler sort it out itself.
+                self.append( param )
+
+    def append( self, *params ) :
+        #   filter out any that are explicitly None
+        [ self._append( param ) for param in params if param is not None ]
+
+class Paragraph( list ) :
+    def __init__( self, *params ) :
+        super( Paragraph, self ).__init__()
+
+        self.Style      = None
+        self.Properties = None
+        self.Frame      = None
+        self.Shading    = None
+
+        self._append = super( Paragraph, self ).append
+
+        for param in params :
+            if   isinstance( param, ParagraphStyle ) : self.Style      = param
+            elif isinstance( param, ParagraphPS    ) : self.Properties = param
+            elif isinstance( param, FramePS        ) : self.Frame      = param
+            elif isinstance( param, ShadingPS      ) : self.Shading    = param
+            else :
+                #   otherwise we add to it to our list of elements and let
+                #   the rendering custom handler sort it out itself.
+                self.append( param )
+
+    def append( self, *params ) :
+        #   filter out any that are explicitly None
+        [ self._append( param ) for param in params if param is not None ]
+
+    def insert( self, index, value ) :
+        if value is not None :
+            super( Paragraph, self ).insert( index, value )
+
+class Table :
+    LEFT    = 1
+    RIGHT   = 2
+    CENTER  = 3
+    ALIGNMENT = [ LEFT, RIGHT, CENTER ]
+
+    NO_WRAPPING = 1
+    WRAP_AROUND = 2
+    WRAPPING = [ NO_WRAPPING, WRAP_AROUND ]
+
+    #   trrh height of row, 0 means automatically adjust, use negative for an absolute
+    #   trgaph is half of the space between a table cell in width, reduce this one
+    #   to get a really tiny column
+
+    def __init__( self, *column_widths, **kwargs ) :
+
+        self.Rows = []
+
+        self.SetAlignment      ( kwargs.pop( 'alignment',         self.LEFT ) )
+        self.SetLeftOffset     ( kwargs.pop( 'left_offset',       None      ) )
+        self.SetGapBetweenCells( kwargs.pop( 'gap_between_cells', None      ) )
+        self.SetColumnWidths   ( *column_widths         )
+
+        assert not kwargs, 'invalid keyword args %s' % kwargs
+
+    def SetAlignment( self, value ) :
+        assert value is None or value in self.ALIGNMENT
+        self.Alignment = value or self.LEFT
+        return self
+
+    def SetLeftOffset( self, value ) :
+        self.LeftOffset = value
+        return self
+
+    def SetGapBetweenCells( self, value ) :
+        self.GapBetweenCells = value
+        return self
+
+    def SetColumnWidths( self, *column_widths ) :
+        self.ColumnWidths = column_widths
+        self.ColumnCount  = len( column_widths )
+        return self
+
+    def AddRow( self, *cells ) :
+        height = None
+        if isinstance( cells[ 0 ], (IntType, FloatType, LongType) ):
+            height = int( cells[ 0 ] )
+            cells  = cells[ 1 : ]
+
+        #  make sure all of the spans add up to the number of columns
+        #  otherwise the table will get corrupted
+        if self.ColumnCount != sum( [ cell.Span for cell in cells ] ) :
+            raise Exception( 'ColumnCount != the total of this row\'s cell.Spans.' )
+
+        self.Rows.append( ( height, cells ) )
+
+    append = AddRow
+
+class Cell( list ) :
+
+    """
+    \clvertalt  Text is top-aligned in cell (the default).
+    \clvertalc  Text is centered vertically in cell.
+    \clvertalb  Text is bottom-aligned in cell.
+    \cltxlrtb   Vertical text aligned left (direction bottom up).
+    \cltxtbrl   Vertical text aligned right (direction top down).
+    """
+
+    ALIGN_TOP    = 1
+    ALIGN_CENTER = 2
+    ALIGN_BOTTOM = 3
+
+    FLOW_LR_TB          = 1
+    FLOW_RL_TB          = 2
+    FLOW_LR_BT          = 3
+    FLOW_VERTICAL_LR_TB = 4
+    FLOW_VERTICAL_TB_RL = 5
+
+    def __init__( self, *params, **kwargs ) :
+        super( Cell, self ).__init__()
+
+        self.SetFrame  ( None )
+        self.SetMargins( None )
+
+        self.SetAlignment( kwargs.get( 'alignment', self.ALIGN_TOP  ) )
+        self.SetFlow     ( kwargs.get( 'flow'     , self.FLOW_LR_TB ) )
+        self.SetSpan     ( kwargs.get( 'span',      1               ) )
+
+        self.SetStartVerticalMerge( kwargs.get( 'start_vertical_merge', False ) )
+        self.SetVerticalMerge     ( kwargs.get( 'vertical_merge',       False ) )
+
+        self._append = super( Cell, self ).append
+
+        for param in params :
+            if   isinstance( param, StringType ) : self.append    ( param )
+            elif isinstance( param, Paragraph  ) : self.append    ( param )
+            elif isinstance( param, FramePS    ) : self.SetFrame  ( param )
+            elif isinstance( param, MarginsPS  ) : self.SetMargins( param )
+
+    def SetFrame( self, value ) :
+        self.Frame = value
+        return self
+
+    def SetMargins( self, value ) :
+        self.Margins = value
+        return self
+
+    def SetAlignment( self, value ) :
+        assert value in [ self.ALIGN_TOP, self.ALIGN_CENTER, self.ALIGN_BOTTOM ] #, self.ALIGN_TEXT_TOP_DOWN, self.ALIGN_TEXT_BOTTOM_UP ]
+        self.Alignment = value
+
+    def SetFlow( self, value ) :
+        assert value in [ self.FLOW_LR_TB, self.FLOW_RL_TB, self.FLOW_LR_BT, self.FLOW_VERTICAL_LR_TB, self.FLOW_VERTICAL_TB_RL ]
+        self.Flow = value
+
+    def SetSpan( self, value ) :
+        #  must be a positive integer
+        self.Span = int( max( value, 1 ) )
+        return self
+
+    def SetStartVerticalMerge( self, value ) :
+        self.StartVerticalMerge = False
+        if value :
+            self.StartVerticalMerge = True
+        return self
+
+    def SetVerticalMerge( self, value ) :
+        self.VerticalMerge  = False
+        if value :
+            self.VerticalMerge = True
+        return self
+
+    def append( self, *params ) :
+        [ self._append( param ) for param in params ]
+
+class Document :
+    def __init__( self, style_sheet=None, default_language=None, view_kind=None, view_zoom_kind=None, view_scale=None ) :
+        self.StyleSheet = style_sheet or MakeDefaultStyleSheet()
+        self.Sections = AttributedList( Section )
+
+        self.SetTitle( None )
+
+        self.DefaultLanguage = default_language or Languages.DEFAULT
+        self.ViewKind        = view_kind        or ViewKind.DEFAULT
+        self.ViewZoomKind    = view_zoom_kind
+        self.ViewScale       = view_scale
+
+    def NewSection( self, *params, **kwargs ) :
+        result = Section( *params, **kwargs )
+        self.Sections.append( result )
+        return result
+
+    def SetTitle( self, value ) :
+        self.Title = value
+        return self
+
+    def Copy( self ) :
+        result = Document( style_sheet      = self.StyleSheet.Copy(),
+                           default_language = self.DefaultLanguage,
+                           view_kind        = self.ViewKind,
+                           view_zoom_kind   = self.ViewZoomKind,
+                           view_scale       = self.ViewScale )
+        result.SetTitle( self.Title )
+        result.Sections = self.Sections.Copy()
+
+        return result
+
+def TEXT( *params, **kwargs ) :
+    text_props = TextPropertySet()
+    text_props.SetFont     ( kwargs.get( 'font',      None  ) )
+    text_props.SetSize     ( kwargs.get( 'size',      None  ) )
+    text_props.SetBold     ( kwargs.get( 'bold',      False ) )
+    text_props.SetItalic   ( kwargs.get( 'italic',    False ) )
+    text_props.SetUnderline( kwargs.get( 'underline', False ) )
+    text_props.SetColour   ( kwargs.get( 'colour',    None  ) )
+
+    if len( params ) == 1 :
+        return Text( params[ 0 ], text_props )
+
+    result = Inline( text_props )
+    apply( result.append, params )
+    return result
+
+def B( *params ) :
+    text_props = TextPropertySet( bold=True )
+
+    if len( params ) == 1 :
+        return Text( params[ 0 ], text_props )
+
+    result = Inline( text_props )
+    apply( result.append, params )
+    return result
+
+def I( *params ) :
+    text_props = TextPropertySet( italic=True )
+
+    if len( params ) == 1 :
+        return Text( params[ 0 ], text_props )
+
+    result = Inline( text_props )
+    apply( result.append, params )
+    return result
+
+def U( *params ) :
+    text_props = TextPropertySet( underline=True )
+
+    if len( params ) == 1 :
+        return Text( params[ 0 ], text_props )
+
+    result = Inline( text_props )
+    apply( result.append, params )
+    return result

ADDED   gluon/contrib/pyrtf/PropertySets.py
Index: gluon/contrib/pyrtf/PropertySets.py
==================================================================
--- /dev/null
+++ gluon/contrib/pyrtf/PropertySets.py
@@ -0,0 +1,488 @@
+"""
+PropertySets group common attributes together, each property set is used to control a specific part of the rendering.
+
+PropertySets can be used in different elements of the document.
+
+For example the FramePropertySet is used in paragraphs, tables, cells, etc.
+
+The TextPropertySet can be used for text or in a Paragraph Style.
+
+"""
+
+from    types       import  StringType
+from    copy        import  deepcopy
+
+
+#
+#   We need some basic Type like fonts, colours and paper definitions
+#
+def MakeAttributeName( value ) :
+    assert value and type( value ) is StringType
+    value = value.replace( ' ', '' )
+    return value
+
+class AttributedList( list ) :
+    def __init__( self, accepted_type=None ) :
+        super( AttributedList, self ).__init__()
+        self.AcceptedType = accepted_type
+        self._append = super( AttributedList, self ).append
+
+    def append( self, *values ) :
+        for value in values :
+            if self.AcceptedType : assert isinstance( value, self.AcceptedType )
+
+            self._append( value )
+
+            name = getattr( value, 'Name', None )
+            if name :
+                name = MakeAttributeName( value.Name )
+                setattr( self, name, value )
+
+    def __deepcopy__( self, memo ) :
+        result = self.__class__()
+        result.append( *self[:] )
+        return result
+
+class Colour :
+    def __init__( self, name, red, green, blue ) :
+        self.SetName ( name  )
+        self.SetRed  ( red   )
+        self.SetGreen( green )
+        self.SetBlue ( blue  )
+
+    def SetName( self, value ) :
+        self.Name = value
+        return self
+
+    def SetRed( self, value ) :
+        self.Red = value
+        return self
+
+    def SetGreen( self, value ) :
+        self.Green = value
+        return self
+
+    def SetBlue( self, value ) :
+        self.Blue = value
+        return self
+
+class Colours( AttributedList ) :
+    def __init__( self ) :
+        super( Colours, self ).__init__( Colour )
+
+class Font :
+    def __init__( self, name, family, character_set = 0, pitch = None, panose = None, alternate = None ) :
+        self.SetName        ( name          )
+        self.SetFamily      ( family        )
+        self.SetCharacterSet( character_set )
+        self.SetPitch       ( pitch         )
+        self.SetPanose      ( panose        )
+        self.SetAlternate   ( alternate     )
+
+    def SetName( self, value ) :
+        self.Name = value
+        return self
+
+    def SetFamily( self, value ) :
+        self.Family = value
+        return self
+
+    def SetCharacterSet( self, value ) :
+        self.CharacterSet = value
+        return self
+
+    def SetPitch( self, value ) :
+        self.Pitch = value
+        return self
+
+    def SetPanose( self, value ) :
+        self.Panose = value
+        return self
+
+    def SetAlternate( self, value ) :
+        self.Alternate = value
+        return self
+
+class Fonts( AttributedList ) :
+    def __init__( self ) :
+        super( Fonts, self ).__init__( Font )
+
+class Paper :
+    def __init__( self, name, code, description, width, height ) :
+        self.SetName       ( name        )
+        self.SetCode       ( code        )
+        self.SetDescription( description )
+        self.SetWidth      ( width       )
+        self.SetHeight     ( height      )
+
+    def SetName( self, value ) :
+        self.Name = value
+        return self
+
+    def SetCode( self, value ) :
+        self.Code = value
+        return self
+
+    def SetDescription( self, value ) :
+        self.Description = value
+        return self
+
+    def SetWidth( self, value ) :
+        self.Width = value
+        return self
+
+    def SetHeight( self, value ) :
+        self.Height = value
+        return self
+
+class Papers( AttributedList ) :
+    def __init__( self ) :
+        super( Papers, self ).__init__( Paper )
+
+#
+#   Then we have property sets which represent different aspects of Styles
+#
+class MarginsPropertySet :
+    def __init__( self, top=None, left=None, bottom=None, right=None ) :
+        self.SetTop   ( top    )
+        self.SetLeft  ( left   )
+        self.SetBottom( bottom )
+        self.SetRight ( right  )
+
+    def SetTop( self, value ) :
+        self.Top = value
+        return self
+
+    def SetLeft( self, value ) :
+        self.Left = value
+        return self
+
+    def SetBottom( self, value ) :
+        self.Bottom = value
+        return self
+
+    def SetRight( self, value ) :
+        self.Right = value
+        return self
+
+class ShadingPropertySet :
+    HORIZONTAL             =  1
+    VERTICAL               =  2
+    FORWARD_DIAGONAL       =  3
+    BACKWARD_DIAGONAL      =  4
+    VERTICAL_CROSS         =  5
+    DIAGONAL_CROSS         =  6
+    DARK_HORIZONTAL        =  7
+    DARK_VERTICAL          =  8
+    DARK_FORWARD_DIAGONAL  =  9
+    DARK_BACKWARD_DIAGONAL = 10
+    DARK_VERTICAL_CROSS    = 11
+    DARK_DIAGONAL_CROSS    = 12
+    PATTERNS = [ HORIZONTAL,
+                 VERTICAL,
+                 FORWARD_DIAGONAL,
+                 BACKWARD_DIAGONAL,
+                 VERTICAL_CROSS,
+                 DIAGONAL_CROSS,
+                 DARK_HORIZONTAL,
+                 DARK_VERTICAL,
+                 DARK_FORWARD_DIAGONAL,
+                 DARK_BACKWARD_DIAGONAL,
+                 DARK_VERTICAL_CROSS,
+                 DARK_DIAGONAL_CROSS ]
+
+    def __init__( self, shading=None, pattern=None, foreground=None, background=None ) :
+        self.SetShading   ( shading    )
+        self.SetForeground( foreground )
+        self.SetBackground( background )
+        self.SetPattern   ( pattern    )
+
+    def __deepcopy__( self, memo ) :
+        return ShadingPropertySet( self.Shading,
+                                   self.Foreground,
+                                   self.Background,
+                                   self.Pattern )
+
+    def SetShading( self, value ) :
+        self.Shading = value
+        return self
+
+    def SetPattern( self, value ) :
+        assert value is None or value in self.PATTERNS
+        self.Pattern = value
+        return self
+
+    def SetForeground( self, value ) :
+        assert not value or isinstance( value, Colour )
+        self.Foreground = value
+        return self
+
+    def SetBackground( self, value ) :
+        assert not value or isinstance( value, Colour )
+        self.Background = value
+        return self
+
+
+class BorderPropertySet :
+    SINGLE    = 1
+    DOUBLE    = 2
+    SHADOWED  = 3
+    DOUBLED   = 4
+    DOTTED    = 5
+    DASHED    = 6
+    HAIRLINE  = 7
+    STYLES    = [ SINGLE, DOUBLE, SHADOWED, DOUBLED, DOTTED, DASHED, HAIRLINE ]
+
+    def __init__( self, width=None, style=None, colour=None, spacing=None ) :
+        self.SetWidth  ( width   )
+        self.SetStyle  ( style or self.SINGLE )
+        self.SetColour ( colour  )
+        self.SetSpacing( spacing )
+
+    def SetWidth( self, value ) :
+        self.Width = value
+        return self
+
+    def SetStyle( self, value ) :
+        assert value is None or value in self.STYLES
+        self.Style = value
+        return self
+
+    def SetColour( self, value ) :
+        assert value is None or isinstance( value, Colour )
+        self.Colour = value
+        return self
+
+    def SetSpacing( self, value ) :
+        self.Spacing = value
+        return self
+
+class FramePropertySet :
+    def __init__( self, top=None, left=None, bottom=None, right=None ) :
+        self.SetTop   ( top    )
+        self.SetLeft  ( left   )
+        self.SetBottom( bottom )
+        self.SetRight ( right  )
+
+    def SetTop( self, value ) :
+        assert value is None or isinstance( value, BorderPropertySet )
+        self.Top = value
+        return self
+
+    def SetLeft( self, value ) :
+        assert value is None or isinstance( value, BorderPropertySet )
+        self.Left = value
+        return self
+
+    def SetBottom( self, value ) :
+        assert value is None or isinstance( value, BorderPropertySet )
+        self.Bottom = value
+        return self
+
+    def SetRight( self, value ) :
+        assert value is None or isinstance( value, BorderPropertySet )
+        self.Right = value
+        return self
+
+class TabPropertySet :
+    DEFAULT_WIDTH = 720
+
+    LEFT      = 1
+    RIGHT     = 2
+    CENTER    = 3
+    DECIMAL   = 4
+    ALIGNMENT = [ LEFT, RIGHT, CENTER, DECIMAL ]
+
+    DOTS        = 1
+    HYPHENS     = 2
+    UNDERLINE   = 3
+    THICK_LINE  = 4
+    EQUAL_SIGN  = 5
+    LEADERS = [ DOTS, HYPHENS, UNDERLINE, THICK_LINE, EQUAL_SIGN ]
+
+    def __init__( self, width=None, alignment=None, leader=None ) :
+        self.SetWidth    ( width     )
+        self.SetAlignment( alignment or self.LEFT )
+        self.SetLeader   ( leader    )
+
+    def SetWidth( self, value ) :
+        self.Width = value
+        return self
+
+    def SetAlignment( self, value ) :
+        assert value in self.ALIGNMENT
+        self.Alignment = value
+        return self
+
+    def SetLeader( self, value ) :
+        assert not value or value in self.LEADERS
+        self.Leader = value
+        return self
+
+class TextPropertySet :
+
+    def __init__( self, font=None, size=None, bold=None, italic=None, underline=None, colour=None, frame=None, expansion=None ) :
+        self.SetFont         ( font )
+        self.SetSize         ( size )
+
+        self.SetBold         ( bold      or False )
+        self.SetItalic       ( italic    or False )
+        self.SetUnderline    ( underline or False )
+
+        self.SetColour( colour )
+        self.SetFrame ( frame  )
+
+        self.SetStrikeThrough  ( False )
+        self.SetDottedUnderline( False )
+        self.SetDoubleUnderline( False )
+        self.SetWordUnderline  ( False )
+        self.SetExpansion      ( expansion )
+
+    def Copy( self ) :
+        return deepcopy( self )
+
+    def __deepcopy__( self, memo ) :
+        #   the font must remain a reference to the same font that we are looking at
+        #   so we want to stop the recursiveness at this point and return an object
+        #   with the right references.
+        result = TextPropertySet( self.Font,
+                                  self.Size,
+                                  self.Bold,
+                                  self.Italic,
+                                  self.Underline,
+                                  self.Colour,
+                                  deepcopy( self.Frame, memo ) )
+        result.SetStrikeThrough( self.StrikeThrough )
+        return result
+
+    def SetFont( self, value ) :
+        assert not value or isinstance( value, Font )
+        self.Font = value
+        return self
+
+    def SetSize( self, value ) :
+        self.Size = value
+        return self
+
+    def SetBold( self, value ) :
+        self.Bold = False
+        if value : self.Bold = True
+        return self
+
+    def SetItalic( self, value ) :
+        self.Italic = False
+        if value : self.Italic = True
+        return self
+
+    def SetUnderline( self, value ) :
+        self.Underline = False
+        if value : self.Underline = True
+        return self
+
+    def SetColour( self, value ) :
+        assert value is None or isinstance( value, Colour )
+        self.Colour = value
+        return self
+
+    def SetFrame( self, value ) :
+        assert value is None or isinstance( value, BorderPropertySet )
+        self.Frame = value
+        return self
+
+    def SetStrikeThrough( self, value ) :
+        self.StrikeThrough = False
+        if value : self.StrikeThrough = True
+        return self
+
+    def SetDottedUnderline( self, value ) :
+        self.DottedUnderline = False
+        if value : self.DottedUnderline = True
+        return self
+
+    def SetDoubleUnderline( self, value ) :
+        self.DoubleUnderline = False
+        if value : self.DoubleUnderline = True
+        return self
+
+    def SetWordUnderline( self, value ) :
+        self.WordUnderline = False
+        if value : self.WordUnderline = True
+        return self
+
+    def SetExpansion( self, value ) :
+        self.Expansion = value
+        return self
+
+class ParagraphPropertySet :
+    LEFT       = 1
+    RIGHT      = 2
+    CENTER     = 3
+    JUSTIFY    = 4
+    DISTRIBUTE = 5
+    ALIGNMENT  = [ LEFT, RIGHT, CENTER, JUSTIFY, DISTRIBUTE ]
+
+    def __init__( self, alignment=None, space_before=None, space_after=None, tabs=None, first_line_indent=None, left_indent=None, right_indent=None, page_break_before=None ) :
+        self.SetAlignment  ( alignment or self.LEFT )
+        self.SetSpaceBefore( space_before )
+        self.SetSpaceAfter ( space_after  )
+
+        self.Tabs = []
+        if tabs : apply( self.SetTabs, tabs )
+
+        self.SetFirstLineIndent( first_line_indent or None )
+        self.SetLeftIndent     ( left_indent or None )
+        self.SetRightIndent    ( right_indent or None )
+
+        self.SetPageBreakBefore( page_break_before )
+
+        self.SetSpaceBetweenLines( None )
+
+    def Copy( self ) :
+        return deepcopy( self )
+
+    def SetAlignment( self, value ) :
+        assert not value or value in self.ALIGNMENT
+        self.Alignment = value or self.LEFT
+        return self
+
+    def SetSpaceBefore( self, value ) :
+        self.SpaceBefore = value
+        return self
+
+    def SetSpaceAfter( self, value ) :
+        self.SpaceAfter = value
+        return self
+
+    def SetTabs( self, *params ) :
+        self.Tabs = params
+        return self
+
+    def SetFirstLineIndent( self, value ) :
+        self.FirstLineIndent = value
+        return self
+
+    def SetLeftIndent( self, value ) :
+        self.LeftIndent = value
+        return self
+
+    def SetRightIndent( self, value ) :
+        self.RightIndent = value
+        return self
+
+    def SetSpaceBetweenLines( self, value ) :
+        self.SpaceBetweenLines = value
+        return self
+
+    def SetPageBreakBefore( self, value ) :
+        self.PageBreakBefore = False
+        if value : self.PageBreakBefore = True
+        return self
+
+#   Some short cuts to make the code a bit easier to read
+MarginsPS   = MarginsPropertySet
+ShadingPS   = ShadingPropertySet
+BorderPS    = BorderPropertySet
+FramePS     = FramePropertySet
+TabPS       = TabPropertySet
+TextPS      = TextPropertySet
+ParagraphPS = ParagraphPropertySet

ADDED   gluon/contrib/pyrtf/README
Index: gluon/contrib/pyrtf/README
==================================================================
--- /dev/null
+++ gluon/contrib/pyrtf/README
@@ -0,0 +1,19 @@
+Version 0.46
+
+Added EMF support.
+
+Added more sophisticated scaling options.
+
+See examples2.py for both.
+
+Grant Edwards, grante@users.sourceforge.net
+
+
+
+Version 0.45
+
+Finally, image support!!!  Handles PNGs and JPGs.
+
+See examples2.py for the gory details.
+
+Simon Cusack, scusack@sourceforge.net

ADDED   gluon/contrib/pyrtf/Renderer.py
Index: gluon/contrib/pyrtf/Renderer.py
==================================================================
--- /dev/null
+++ gluon/contrib/pyrtf/Renderer.py
@@ -0,0 +1,638 @@
+from types import StringType, ListType, TupleType
+from copy import deepcopy
+from Elements import *
+
+DEFAULT_TAB_WIDTH = 720
+
+ParagraphAlignmentMap = { ParagraphPropertySet.LEFT       : 'ql',
+                          ParagraphPropertySet.RIGHT      : 'qr',
+                          ParagraphPropertySet.CENTER     : 'qc',
+                          ParagraphPropertySet.JUSTIFY    : 'qj',
+                          ParagraphPropertySet.DISTRIBUTE : 'qd' }
+
+TabAlignmentMap = { TabPropertySet.LEFT    : '',
+                    TabPropertySet.RIGHT   : 'tqr',
+                    TabPropertySet.CENTER  : 'tqc',
+                    TabPropertySet.DECIMAL : 'tqdec' }
+
+TableAlignmentMap = { Table.LEFT   : 'trql',
+                      Table.RIGHT  : 'trqr',
+                      Table.CENTER : 'trqc' }
+
+CellAlignmentMap = { Cell.ALIGN_TOP            : '', # clvertalt
+                     Cell.ALIGN_CENTER         : 'clvertalc',
+                     Cell.ALIGN_BOTTOM         : 'clvertalb' }
+
+CellFlowMap = { Cell.FLOW_LR_TB          : '',           # cltxlrtb, Text in a cell flows from left to right and top to bottom (default)
+                Cell.FLOW_RL_TB          : 'cltxtbrl',   # Text in a cell flows right to left and top to bottom
+                Cell.FLOW_LR_BT          : 'cltxbtlr',   # Text in a cell flows left to right and bottom to top
+                Cell.FLOW_VERTICAL_LR_TB : 'cltxlrtbv',  # Text in a cell flows left to right and top to bottom, vertical
+                Cell.FLOW_VERTICAL_TB_RL : 'cltxtbrlv' } # Text in a cell flows top to bottom and right to left, vertical
+
+ShadingPatternMap = { ShadingPropertySet.HORIZONTAL             : 'bghoriz',
+                      ShadingPropertySet.VERTICAL               : 'bgvert',
+                      ShadingPropertySet.FORWARD_DIAGONAL       : 'bgfdiag',
+                      ShadingPropertySet.BACKWARD_DIAGONAL      : 'bgbdiag',
+                      ShadingPropertySet.VERTICAL_CROSS         : 'bgcross',
+                      ShadingPropertySet.DIAGONAL_CROSS         : 'bgdcross',
+                      ShadingPropertySet.DARK_HORIZONTAL        : 'bgdkhoriz',
+                      ShadingPropertySet.DARK_VERTICAL          : 'bgdkvert',
+                      ShadingPropertySet.DARK_FORWARD_DIAGONAL  : 'bgdkfdiag',
+                      ShadingPropertySet.DARK_BACKWARD_DIAGONAL : 'bgdkbdiag',
+                      ShadingPropertySet.DARK_VERTICAL_CROSS    : 'bgdkcross',
+                      ShadingPropertySet.DARK_DIAGONAL_CROSS    : 'bgdkdcross' }
+
+TabLeaderMap = { TabPropertySet.DOTS        : 'tldot',
+                 TabPropertySet.HYPHENS     : 'tlhyph',
+                 TabPropertySet.UNDERLINE   : 'tlul',
+                 TabPropertySet.THICK_LINE  : 'tlth',
+                 TabPropertySet.EQUAL_SIGN  : 'tleq' }
+
+BorderStyleMap = { BorderPropertySet.SINGLE   : 'brdrs',
+                   BorderPropertySet.DOUBLE   : 'brdrth',
+                   BorderPropertySet.SHADOWED : 'brdrsh',
+                   BorderPropertySet.DOUBLED  : 'brdrdb',
+                   BorderPropertySet.DOTTED   : 'brdrdot',
+                   BorderPropertySet.DASHED   : 'brdrdash',
+                   BorderPropertySet.HAIRLINE : 'brdrhair' }
+
+SectionBreakTypeMap = { Section.NONE   : 'sbknone',
+                        Section.COLUMN : 'sbkcol',
+                        Section.PAGE   : 'sbkpage',
+                        Section.EVEN   : 'sbkeven',
+                        Section.ODD    : 'sbkodd' }
+
+class Settings( list ) :
+    def __init__( self ) :
+        super( Settings, self ).__init__()
+        self._append = super( Settings, self ).append
+
+    def append( self, value, mask=None, fallback=None ) :
+        if (value is not 0) and value in [ False, None, '' ] :
+            if fallback : self._append( self, fallback )
+
+        else :
+            if mask :
+                if value is True :
+                    value = mask
+                else :
+                    value = mask % value
+            self._append( value )
+
+    def Join( self ) :
+        if self : return r'\%s' % '\\'.join( self )
+        return ''
+
+    def __repr__( self ) :
+        return self.Join()
+
+class Renderer :
+    def __init__( self, write_custom_element_callback=None ) :
+        self.character_style_map = {}
+        self.paragraph_style_map = {}
+        self.WriteCustomElement  = write_custom_element_callback
+
+    #
+    #   All of the Rend* Functions populate a Settings object with values
+    #
+    def _RendPageProperties( self, section, settings, in_section ) :
+        #  this one is different from the others as it takes the settings from a
+        if in_section :
+            #paper_size_code   = 'psz%s'
+            paper_width_code  = 'pgwsxn%s'
+            paper_height_code = 'pghsxn%s'
+            landscape         = 'lndscpsxn'
+            margin_suffix     = 'sxn'
+
+        else :
+            #paper_size_code   = 'psz%s'
+            paper_width_code  = 'paperw%s'
+            paper_height_code = 'paperh%s'
+            landscape         = 'landscape'
+            margin_suffix     = ''
+
+        #settings.append( section.Paper.Code,   paper_size_code  )
+        settings.append( section.Paper.Width,  paper_width_code  )
+        settings.append( section.Paper.Height, paper_height_code )
+
+        if section.Landscape :
+            settings.append( landscape )
+
+        if section.FirstPageNumber :
+            settings.append( section.FirstPageNumber, 'pgnstarts%s' )
+            settings.append( 'pgnrestart' )
+
+        self._RendMarginsPropertySet( section.Margins, settings, margin_suffix )
+
+    def _RendShadingPropertySet( self, shading_props, settings, prefix='' ) :
+        if not shading_props : return
+
+        settings.append( shading_props.Shading, prefix + 'shading%s' )
+        settings.append( ShadingPatternMap.get( shading_props.Pattern, False ) )
+
+        settings.append( self._colour_map.get( shading_props.Foreground, False ), prefix + 'cfpat%s' )
+        settings.append( self._colour_map.get( shading_props.Background, False ), prefix + 'cbpat%s' )
+
+    def _RendBorderPropertySet( self, edge_props, settings ) :
+        settings.append( BorderStyleMap[ edge_props.Style ] )
+        settings.append( edge_props.Width                                , 'brdrw%s'  )
+        settings.append( self._colour_map.get( edge_props.Colour, False ), 'brdrcf%s' )
+        settings.append( edge_props.Spacing or False                     , 'brsp%s'   )
+
+    def _RendFramePropertySet( self, frame_props, settings, tag_prefix='' ) :
+        if not frame_props : return
+
+        if frame_props.Top :
+            settings.append( tag_prefix + 'brdrt' )
+            self._RendBorderPropertySet( frame_props.Top, settings )
+
+        if frame_props.Left :
+            settings.append( tag_prefix + 'brdrl' )
+            self._RendBorderPropertySet( frame_props.Left, settings )
+
+        if frame_props.Bottom :
+            settings.append( tag_prefix + 'brdrb' )
+            self._RendBorderPropertySet( frame_props.Bottom, settings )
+
+        if frame_props.Right :
+            settings.append( tag_prefix + 'brdrr' )
+            self._RendBorderPropertySet( frame_props.Right, settings )
+
+    def _RendMarginsPropertySet( self, margin_props, settings, suffix='' ) :
+        if not margin_props : return
+
+        settings.append( margin_props.Top,    'margt' + suffix + '%s' )
+        settings.append( margin_props.Left,   'margl' + suffix + '%s' )
+        settings.append( margin_props.Bottom, 'margb' + suffix + '%s' )
+        settings.append( margin_props.Right,  'margr' + suffix + '%s' )
+
+    def _RendParagraphPropertySet( self, paragraph_props, settings ) :
+        if not paragraph_props : return
+        settings.append( ParagraphAlignmentMap[ paragraph_props.Alignment ] )
+
+        settings.append( paragraph_props.SpaceBefore, 'sb%s' )
+        settings.append( paragraph_props.SpaceAfter,  'sa%s' )
+
+        #   then we have to find out all of the tabs
+        width = 0
+        for tab in paragraph_props.Tabs :
+            settings.append( TabAlignmentMap[ tab.Alignment ]   )
+            settings.append( TabLeaderMap.get( tab.Leader, '' ) )
+
+            width += tab.Width or DEFAULT_TAB_WIDTH
+            settings.append( 'tx%s' % width             )
+
+        settings.append( paragraph_props.PageBreakBefore, 'pagebb' )
+
+        settings.append( paragraph_props.FirstLineIndent, 'fi%s'   )
+        settings.append( paragraph_props.LeftIndent,      'li%s'   )
+        settings.append( paragraph_props.RightIndent,     'ri%s'   )
+
+        if paragraph_props.SpaceBetweenLines :
+            if paragraph_props.SpaceBetweenLines < 0 :
+                settings.append( paragraph_props.SpaceBetweenLines, r'sl%s\slmult0' )
+            else :
+                settings.append( paragraph_props.SpaceBetweenLines, r'sl%s\slmult1' )
+
+    def _RendTextPropertySet( self, text_props, settings ) :
+        if not text_props : return
+
+        if text_props.Expansion :
+            settings.append( text_props.Expansion, 'expndtw%s' )
+
+        settings.append( text_props.Bold,            'b'    )
+        settings.append( text_props.Italic,          'i'    )
+        settings.append( text_props.Underline,       'ul'   )
+        settings.append( text_props.DottedUnderline, 'uld'  )
+        settings.append( text_props.DoubleUnderline, 'uldb' )
+        settings.append( text_props.WordUnderline,   'ulw'  )
+
+        settings.append( self._font_map.get( text_props.Font, False ), 'f%s' )
+        settings.append( text_props.Size, 'fs%s' )
+        settings.append( self._colour_map.get( text_props.Colour, False ), 'cf%s' )
+
+        if text_props.Frame :
+            frame = text_props.Frame
+            settings.append( 'chbrdr' )
+            settings.append( BorderStyleMap[ frame.Style ] )
+            settings.append( frame.Width                                , 'brdrw%s' )
+            settings.append( self._colour_map.get( frame.Colour, False ), 'brdrcf%s' )
+
+    #
+    #   All of the Write* functions will write to the internal file object
+    #
+    #   the _ ones probably don't need to be used by anybody outside
+    #   but the other ones like WriteTextElement could be used in the Custom
+    #   callback.
+    def Write( self, document, fout ) :
+        #  write all of the standard stuff based upon the first document
+        self._doc  = document
+        self._fout = fout
+        self._WriteDocument  ()
+        self._WriteColours   ()
+        self._WriteFonts     ()
+        self._WriteStyleSheet()
+
+        settings = Settings()
+        self._RendPageProperties( self._doc.Sections[ 0 ], settings, in_section=False )
+        self._write( repr( settings ) )
+
+        #  handle the simplest case first, we don't need to do anymore mucking around
+        #  with section headers, etc we can just rip the document out
+        if len( document.Sections ) == 1 :
+            self._WriteSection( document.Sections[ 0 ],
+                                is_first   = True,
+                                add_header = False )
+
+        else :
+            for section_idx, section in enumerate( document.Sections ) :
+                is_first       = section_idx == 0
+                add_header     = True
+                self._WriteSection( section, is_first, add_header )
+
+        self._write( '}' )
+
+        del self._fout, self._doc, self._CurrentStyle
+
+    def _write( self, data, *params ) :
+        #----------------------------------
+        # begin modification
+        # by Herbert Weinhandl
+        # to convert accented characters
+        # to their rtf-compatible form
+        #for c in range( 128, 256 ) :
+        #   data = data.replace( chr(c), "\'%x" % c)
+        # end modification
+        #
+        #  This isn't the right place for this as it is going to do
+        #  this loop for all sorts of writes, including settings, control codes, etc.
+        #
+        #  I will create a def _WriteText (or something) method that is used when the
+        #  actual string that is to be viewed in the document is written, this can then
+        #  do the final accented character check.
+        #
+        #  I left it here so that I remember to do the right thing when I have time
+        #----------------------------------
+
+        if params : data = data % params
+        self._fout.write( data )
+
+    def _WriteDocument( self ) :
+        settings = Settings()
+
+        assert Languages.IsValid   ( self._doc.DefaultLanguage )
+        assert ViewKind.IsValid    ( self._doc.ViewKind        )
+        assert ViewZoomKind.IsValid( self._doc.ViewZoomKind    )
+        assert ViewScale.IsValid   ( self._doc.ViewScale       )
+
+        settings.append( self._doc.DefaultLanguage, 'deflang%s'   )
+        settings.append( self._doc.ViewKind       , 'viewkind%s'  )
+        settings.append( self._doc.ViewZoomKind   , 'viewzk%s'    )
+        settings.append( self._doc.ViewScale      , 'viewscale%s' )
+
+        self._write( "{\\rtf1\\ansi\\ansicpg1252\\deff0%s\n" % settings )
+
+    def _WriteColours( self ) :
+        self._write( r"{\colortbl ;" )
+
+        self._colour_map = {}
+        offset = 0
+        for colour in self._doc.StyleSheet.Colours :
+            self._write( r'\red%s\green%s\blue%s;', colour.Red, colour.Green, colour.Blue )
+            self._colour_map[ colour ] = offset + 1
+            offset += 1
+        self._write( "}\n" )
+
+    def _WriteFonts( self ) :
+        self._write( r'{\fonttbl' )
+
+        self._font_map = {}
+        offset = 0
+        for font in self._doc.StyleSheet.Fonts :
+            pitch     = ''
+            panose    = ''
+            alternate = ''
+            if font.Pitch     : pitch     = r'\fprq%s'    % font.Pitch
+            if font.Panose    : panose    = r'{\*\panose %s}' % font.Panose
+            if font.Alternate : alternate = r'{\*\falt %s}'   % font.Alternate.Name
+
+            self._write( r'{\f%s\f%s%s\fcharset%s%s %s%s;}',
+                         offset,
+                         font.Family,
+                         pitch,
+                         font.CharacterSet,
+                         panose,
+                         font.Name,
+                         alternate )
+
+            self._font_map[ font ] = offset
+            offset += 1
+
+        self._write( "}\n" )
+
+    def _WriteStyleSheet( self ) :
+        self._write( r"{\stylesheet" )
+
+        #   TO DO: character styles, does anybody actually use them?
+
+        offset_map = {}
+        for idx, style in enumerate( self._doc.StyleSheet.ParagraphStyles ) :
+            offset_map[ style ] = idx
+
+        #   paragraph styles
+        self.paragraph_style_map = {}
+        for idx, style in enumerate( self._doc.StyleSheet.ParagraphStyles ) :
+
+            if idx == 0 :
+                default = style
+            else :
+                self._write( '\n' )
+
+            settings = Settings()
+
+            #   paragraph properties
+            self._RendParagraphPropertySet( style.ParagraphPropertySet, settings )
+            self._RendFramePropertySet    ( style.FramePropertySet,     settings )
+            self._RendShadingPropertySet  ( style.ShadingPropertySet,   settings )
+
+            #   text properties
+            self._RendTextPropertySet   ( style.TextStyle.TextPropertySet,     settings )
+            self._RendShadingPropertySet( style.TextStyle.ShadingPropertySet,  settings )
+
+            #   have to take
+            based_on = '\\sbasedon%s' % offset_map.get( style.BasedOn, 0 )
+            next     = '\\snext%s'    % offset_map.get( style.Next,    0 )
+
+            inln = '\\s%s%s' % ( idx, settings )
+            self._write( "{%s%s%s %s;}", inln, based_on, next, style.Name )
+
+            self.paragraph_style_map[ style ] = inln
+
+        #   if now style is specified for the first paragraph to be written, this one
+        #   will be used
+        self._CurrentStyle = self.paragraph_style_map[ default ]
+
+        self._write( "}\n" )
+
+    def _WriteSection( self, section, is_first, add_header ) :
+
+        def WriteHF( hf, rtfword ) :
+            #if not hf : return
+
+            #  if we don't have anything in the header/footer then include
+            #  a blank paragraph, this stops it from picking up the header/footer
+            #  from the previous section
+            # if not hf :   hf = [ Paragraph( '' ) ]
+            if not hf : hf = []
+
+            self._write( '{\\%s' % rtfword )
+            self._WriteElements( hf )
+            self._write( '}\n' )
+
+        settings = Settings()
+
+        if not is_first :
+            #  we need to finish off the preceding section
+            #  and reset all of our defaults back to standard
+            settings.append( 'sect'  )
+
+        #  reset to our defaults
+        settings.append( 'sectd' )
+
+        if add_header :
+            settings.append( SectionBreakTypeMap[ section.BreakType ] )
+            self._RendPageProperties( section, settings, in_section=True )
+
+        settings.append( section.HeaderY, 'headery%s' )
+        settings.append( section.FooterY, 'footery%s' )
+
+        #  write all of these out now as we need to do a write elements in the
+        #  next section
+        self._write( repr( settings ) )
+
+        #   finally after all that has settled down we can do the
+        #   headers and footers
+        if section.FirstHeader or section.FirstFooter :
+            #  include the titlepg flag if the first page has a special format
+            self._write( r'\titlepg' )
+            WriteHF( section.FirstHeader, 'headerf' )
+            WriteHF( section.FirstFooter, 'footerf' )
+
+        WriteHF( section.Header, 'header' )
+        WriteHF( section.Footer, 'footer' )
+
+        #   and at last the contents of the section that actually appear on the page
+        self._WriteElements( section )
+
+    def _WriteElements( self, elements ) :
+        new_line = ''
+        for element in elements :
+            self._write( new_line )
+            new_line = '\n'
+
+            clss = element.__class__
+
+            if clss == Paragraph :
+                self.WriteParagraphElement( element )
+
+            elif clss == Table :
+                self.WriteTableElement( element )
+
+            elif clss == StringType :
+                self.WriteParagraphElement( Paragraph( element ) )
+
+            elif clss in [ RawCode, Image ] :
+                self.WriteRawCode( element )
+
+            #elif clss == List  :
+            #   self._HandleListElement( element )
+
+            elif self.WriteCustomElement :
+                self.WriteCustomElement( self, element )
+
+            else :
+                raise Exception( "Don't know how to handle elements of type %s" % clss )
+
+    def WriteParagraphElement( self, paragraph_elem, tag_prefix='', tag_suffix=r'\par', opening='{', closing='}' ) :
+
+        #   the tag_prefix and the tag_suffix take care of paragraphs in tables.  A
+        #   paragraph in a table requires and extra tag at the front (intbl) and we
+        #   don't want the ending tag everytime.  We want it for all paragraphs but
+        #   the last.
+
+        overrides = Settings()
+        self._RendParagraphPropertySet( paragraph_elem.Properties, overrides )
+        self._RendFramePropertySet    ( paragraph_elem.Frame,      overrides )
+        self._RendShadingPropertySet  ( paragraph_elem.Shading,    overrides )
+
+        #   when writing the RTF the style is carried from the previous paragraph to the next,
+        #   so if the currently written paragraph has a style then make it the current one,
+        #   otherwise leave it as it was
+        self._CurrentStyle = self.paragraph_style_map.get( paragraph_elem.Style, self._CurrentStyle )
+
+        self._write( r'%s\pard\plain%s %s%s ' % ( opening, tag_prefix, self._CurrentStyle, overrides ) )
+
+        for element in paragraph_elem :
+
+            if isinstance( element, StringType ) :
+                self._write( element )
+
+            elif isinstance( element, RawCode ) :
+                self._write( element.Data )
+
+            elif isinstance( element, Text ) :
+                self.WriteTextElement( element )
+
+            elif isinstance( element, Inline ) :
+                self.WriteInlineElement( element )
+
+            elif element == TAB :
+                self._write( r'\tab ' )
+
+            elif element == LINE :
+                self._write( r'\line ' )
+
+            elif self.WriteCustomElement :
+                self.WriteCustomElement( self, element )
+
+            else :
+                raise Exception( 'Don\'t know how to handle %s' % element )
+
+        self._write( tag_suffix + closing )
+
+    def WriteRawCode( self, raw_elem ) :
+        self._write( raw_elem.Data )
+
+    def WriteTextElement( self, text_elem ) :
+        overrides = Settings()
+
+        self._RendTextPropertySet   ( text_elem.Properties, overrides )
+        self._RendShadingPropertySet( text_elem.Shading,    overrides, 'ch' )
+
+        #   write the wrapper and then let the custom handler have a go
+        if overrides : self._write( '{%s ' % repr( overrides ) )
+
+        #   if the data is just a string then we can now write it
+        if isinstance( text_elem.Data, StringType ) :
+            self._write( text_elem.Data or '' )
+
+        elif text_elem.Data == TAB :
+            self._write( r'\tab ' )
+
+        else :
+            self.WriteCustomElement( self, text_elem.Data )
+
+        if overrides : self._write( '}' )
+
+    def WriteInlineElement( self, inline_elem ) :
+        overrides = Settings()
+
+        self._RendTextPropertySet   ( inline_elem.Properties, overrides )
+        self._RendShadingPropertySet( inline_elem.Shading,    overrides, 'ch' )
+
+        #   write the wrapper and then let the custom handler have a go
+        if overrides : self._write( '{%s ' % repr( overrides ) )
+
+        for element in inline_elem :
+            #   if the data is just a string then we can now write it
+            if isinstance( element, StringType ) :
+                self._write( element )
+
+            elif isinstance( element, RawCode ) :
+                self._write( element.Data )
+
+            elif element == TAB :
+                self._write( r'\tab ' )
+
+            elif element == LINE :
+                self._write( r'\line ' )
+
+            else :
+                self.WriteCustomElement( self, element )
+
+        if overrides : self._write( '}' )
+
+    def WriteText( self, text ) :
+        self._write( text or '' )
+
+    def WriteTableElement( self, table_elem ) :
+
+        vmerge = [ False ] * table_elem.ColumnCount
+        for height, cells in table_elem.Rows :
+
+            #   calculate the right hand edge of the cells taking into account the spans
+            offset   = table_elem.LeftOffset or 0
+            cellx    = []
+            cell_idx = 0
+            for cell in cells :
+                cellx.append( offset + sum( table_elem.ColumnWidths[ : cell_idx + cell.Span ] ) )
+                cell_idx += cell.Span
+
+            self._write( r'{\trowd' )
+
+            settings = Settings()
+
+            #   the spec says that this value is mandatory and I think that 108 is the default value
+            #   so I'll take care of it here
+            settings.append( table_elem.GapBetweenCells or 108, 'trgaph%s' )
+            settings.append( TableAlignmentMap[ table_elem.Alignment ] )
+            settings.append( height, 'trrh%s' )
+            settings.append( table_elem.LeftOffset, 'trleft%s' )
+
+            width = table_elem.LeftOffset or 0
+            for idx, cell in enumerate( cells ) :
+                self._RendFramePropertySet  ( cell.Frame,   settings, 'cl' )
+
+                #  cells don't have margins so I don't know why I was doing this
+                #  I think it might have an affect in some versions of some WPs.
+                #self._RendMarginsPropertySet( cell.Margins, settings, 'cl' )
+
+                #  if we are starting to merge or if this one is the first in what is
+                #  probably a series of merges then start the vertical merging
+                if cell.StartVerticalMerge or (cell.VerticalMerge and not vmerge[ idx ]) :
+                    settings.append( 'clvmgf' )
+                    vmerge[ idx ] = True
+
+                elif cell.VerticalMerge :
+                    #..continuing a merge
+                    settings.append( 'clvmrg' )
+
+                else :
+                    #..no merging going on so make sure that it is off
+                    vmerge[ idx ] = False
+
+                #  for any cell in the next row that is covered by this span we
+                #  need to run off the vertical merging as we don't want them
+                #  merging up into this spanned cell
+                for vmerge_idx in range( idx + 1, idx + cell.Span - 1 ) :
+                    vmerge[ vmerge_idx ] = False
+
+                settings.append( CellAlignmentMap[ cell.Alignment ] )
+                settings.append( CellFlowMap[ cell.Flow ] )
+
+                #  this terminates the definition of a cell and represents the right most edge of the cell from the left margin
+                settings.append( cellx[ idx ], 'cellx%s' )
+
+            self._write( repr( settings ) )
+
+            for cell in cells :
+                if len( cell ) :
+                    last_idx = len( cell ) - 1
+                    for element_idx, element in enumerate( cell ) :
+                        #   wrap plain strings in paragraph tags
+                        if isinstance( element, StringType ) :
+                            element = Paragraph( element )
+
+                        #   don't forget the prefix or else word crashes and does all sorts of strange things
+                        if element_idx == last_idx :
+                            self.WriteParagraphElement( element, tag_prefix=r'\intbl', tag_suffix='', opening='', closing='' )
+
+                        else :
+                            self.WriteParagraphElement( element, tag_prefix=r'\intbl', opening='', closing='' )
+
+                    self._write( r'\cell' )
+
+                else :
+                    self._write( r'\pard\intbl\cell' )
+
+            self._write( '\\row}\n' )

ADDED   gluon/contrib/pyrtf/Styles.py
Index: gluon/contrib/pyrtf/Styles.py
==================================================================
--- /dev/null
+++ gluon/contrib/pyrtf/Styles.py
@@ -0,0 +1,93 @@
+"""
+A Styles is a collection of PropertySets that can be applied to a particular RTF element.
+
+At present there are only two, Text and Paragraph but ListStyles will be added soon too.
+
+
+"""
+
+from PropertySets import *
+
+class TextStyle :
+    def __init__( self, text_props, name=None, shading_props=None ) :
+        self.SetTextPropertySet   ( text_props    )
+        self.SetName              ( name          )
+        self.SetShadingPropertySet( shading_props )
+
+    def Copy( self ) :
+        return deepcopy( self )
+
+    def SetName( self, value ) :
+        self.Name = value
+        return self
+
+    def SetTextPropertySet( self, value ) :
+        assert isinstance( value, TextPropertySet )
+        self.TextPropertySet = value
+        return self
+
+    def SetShadingPropertySet( self, value ) :
+        assert value is None or isinstance( value, ShadingPropertySet )
+        self.ShadingPropertySet = value or ShadingPropertySet()
+        return self
+
+class ParagraphStyle :
+    def __init__( self, name, text_style, paragraph_props=None, frame_props=None, shading_props=None ) :
+
+        #   A style must have Font and a Font Size but the Text property set doesn't
+        #   make these mandatory so that they can be used for overrides so at this point
+        #   we need to make sure that that we have these values set
+        if not text_style.TextPropertySet.Font : raise Exception( 'Paragraph Styles must have a Font specified.'      )
+        if not text_style.TextPropertySet.Size : raise Exception( 'Paragraph Styles must have a Font Size specified.' )
+
+        self.SetName                ( name            )
+        self.SetTextStyle           ( text_style      )
+        self.SetParagraphPropertySet( paragraph_props )
+        self.SetFramePropertySet    ( frame_props     )
+        self.SetShadingPropertySet  ( shading_props   )
+
+        self.SetBasedOn( None )
+        self.SetNext   ( None )
+
+    def Copy( self ) :
+        return deepcopy( self )
+
+    def SetName( self, value ) :
+        self.Name = value
+        return self
+
+    def SetTextStyle( self, value ) :
+        assert isinstance( value, TextStyle )
+        self.TextStyle = value
+        return self
+
+    def SetParagraphPropertySet( self, value ) :
+        assert value is None or isinstance( value, ParagraphPropertySet )
+        self.ParagraphPropertySet = value or ParagraphPropertySet()
+        return self
+
+    def SetFramePropertySet( self, value ) :
+        assert value is None or isinstance( value, FramePropertySet )
+        self.FramePropertySet = value or FramePropertySet()
+        return self
+
+    def SetShadingPropertySet( self, value ) :
+        """Set the background shading for the paragraph."""
+
+        assert value is None or isinstance( value, ShadingPropertySet )
+        self.ShadingPropertySet = value or ShadingPropertySet()
+        return self
+
+    def SetBasedOn( self, value ) :
+        """Set the Paragraph Style that this one is based on."""
+
+        assert not value or isinstance( value, ParagraphStyle )
+        self.BasedOn = value
+        return self
+
+    def SetNext( self, value ) :
+        """Set the Paragraph Style that should follow this one."""
+
+        assert not value or isinstance( value, ParagraphStyle )
+        self.Next    = value
+        return self

ADDED   gluon/contrib/pyrtf/__init__.py
Index: gluon/contrib/pyrtf/__init__.py
==================================================================
--- /dev/null
+++ gluon/contrib/pyrtf/__init__.py
@@ -0,0 +1,11 @@
+from    PropertySets    import  *
+from    Elements    import  *
+from    Styles      import  *
+from    Renderer    import  *
+
+def dumps(doc):
+    import cStringIO
+    s=cStringIO.StringIO()
+    r=Renderer()
+    r.Write(doc,s)
+    return s.getvalue()

ADDED   gluon/contrib/pysimplesoap/__init__.py
Index: gluon/contrib/pysimplesoap/__init__.py
==================================================================
--- /dev/null
+++ gluon/contrib/pysimplesoap/__init__.py
@@ -0,0 +1,3 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+"Contributed modules"

ADDED   gluon/contrib/pysimplesoap/client.py
Index: gluon/contrib/pysimplesoap/client.py
==================================================================
--- /dev/null
+++ gluon/contrib/pysimplesoap/client.py
@@ -0,0 +1,688 @@
+#!/usr/bin/python
+# -*- coding: latin-1 -*-
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as published by the
+# Free Software Foundation; either version 3, or (at your option) any later
+# version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY
+# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+
+"Pythonic simple SOAP Client implementation"
+
+__author__ = "Mariano Reingart (reingart@gmail.com)"
+__copyright__ = "Copyright (C) 2008 Mariano Reingart"
+__license__ = "LGPL 3.0"
+__version__ = "1.02c"
+
+import urllib
+try:
+    import httplib2
+    Http = httplib2.Http
+except ImportError:
+    import urllib2
+    class Http(): # wrapper to use when httplib2 not available
+        def request(self, url, method, body, headers):
+            f = urllib2.urlopen(urllib2.Request(url, body, headers))
+            return f.info(), f.read()
+
+    
+from simplexml import SimpleXMLElement, TYPE_MAP, OrderedDict
+
+class SoapFault(RuntimeError):
+    def __init__(self,faultcode,faultstring):
+        self.faultcode = faultcode
+        self.faultstring = faultstring
+
+# soap protocol specification & namespace
+soap_namespaces = dict(
+    soap11="http://schemas.xmlsoap.org/soap/envelope/",
+    soap="http://schemas.xmlsoap.org/soap/envelope/",
+    soapenv="http://schemas.xmlsoap.org/soap/envelope/",
+    soap12="http://www.w3.org/2003/05/soap-env",
+)
+
+class SoapClient(object):
+    "Simple SOAP Client (s�mil PHP)"
+    def __init__(self, location = None, action = None, namespace = None,
+                 cert = None, trace = False, exceptions = True, proxy = None, ns=False, 
+                 soap_ns=None, wsdl = None, cache = False):
+        self.certssl = cert             
+        self.keyssl = None              
+        self.location = location        # server location (url)
+        self.action = action            # SOAP base action
+        self.namespace = namespace      # message 
+        self.trace = trace              # show debug messages
+        self.exceptions = exceptions    # lanzar execpiones? (Soap Faults)
+        self.xml_request = self.xml_response = ''
+        if not soap_ns and not ns:
+            self.__soap_ns = 'soap' # 1.1
+        elif not soap_ns and ns:
+            self.__soap_ns = 'soapenv' # 1.2
+        else:
+            self.__soap_ns = soap_ns
+        
+        # parse wsdl url
+        self.services = wsdl and self.wsdl(wsdl, debug=trace, cache=cache) 
+        self.service_port = None                 # service port for late binding
+
+        if not proxy:
+            self.http = Http()
+        else:
+            import socks
+            ##httplib2.debuglevel=4
+            self.http = httplib2.Http(proxy_info = httplib2.ProxyInfo(
+                proxy_type=socks.PROXY_TYPE_HTTP, **proxy))
+        #if self.certssl: # esto funciona para validar al server?
+        #    self.http.add_certificate(self.keyssl, self.keyssl, self.certssl)
+        self.__ns = ns # namespace prefix or False to not use it
+        if not ns:
+            self.__xml = """<?xml version="1.0" encoding="UTF-8"?> 
+<%(soap_ns)s:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
+    xmlns:xsd="http://www.w3.org/2001/XMLSchema" 
+    xmlns:%(soap_ns)s="%(soap_uri)s">
+<%(soap_ns)s:Body>
+    <%(method)s xmlns="%(namespace)s">
+    </%(method)s>
+</%(soap_ns)s:Body>
+</%(soap_ns)s:Envelope>"""
+        else:
+            self.__xml = """<?xml version="1.0" encoding="UTF-8"?>
+<%(soap_ns)s:Envelope xmlns:%(soap_ns)s="%(soap_uri)s" xmlns:%(ns)s="%(namespace)s">
+<%(soap_ns)s:Header/>
+<%(soap_ns)s:Body>
+    <%(ns)s:%(method)s>
+    </%(ns)s:%(method)s>
+</%(soap_ns)s:Body>
+</%(soap_ns)s:Envelope>"""
+
+    def __getattr__(self, attr):
+        "Return a pseudo-method that can be called"
+        if not self.services: # not using WSDL?
+            return lambda self=self, *args, **kwargs: self.call(attr,*args,**kwargs)
+        else: # using WSDL:
+            return lambda self=self, *args, **kwargs: self.wsdl_call(attr,*args,**kwargs)
+        
+    def call(self, method, *args, **kwargs):
+        "Prepare xml request and make SOAP call, returning a SimpleXMLElement"                
+        #TODO: method != input_message
+        # Basic SOAP request:
+        xml = self.__xml % dict(method=method, namespace=self.namespace, ns=self.__ns,
+                                soap_ns=self.__soap_ns, soap_uri=soap_namespaces[self.__soap_ns])
+        request = SimpleXMLElement(xml,namespace=self.__ns and self.namespace, prefix=self.__ns)
+        # serialize parameters
+        if kwargs:
+            parameters = kwargs.items()
+        else:
+            parameters = args
+        if parameters and isinstance(parameters[0], SimpleXMLElement):
+            # merge xmlelement parameter ("raw" - already marshalled)
+            for param in parameters[0].children():
+                getattr(request,method).import_node(param)
+        else:
+            # marshall parameters:
+            for k,v in parameters: # dict: tag=valor
+                getattr(request,method).marshall(k,v)
+        self.xml_request = request.as_xml()
+        self.xml_response = self.send(method, self.xml_request)
+        response = SimpleXMLElement(self.xml_response, namespace=self.namespace)
+        if self.exceptions and response("Fault", ns=soap_namespaces.values(), error=False):
+            raise SoapFault(unicode(response.faultcode), unicode(response.faultstring))
+        return response
+    
+    def send(self, method, xml):
+        "Send SOAP request using HTTP"
+        if self.location == 'test': return
+        location = "%s" % self.location #?op=%s" % (self.location, method)
+        if self.services:
+            soap_action = self.action 
+        else:
+            soap_action = self.action+method
+        headers={
+                'Content-type': 'text/xml; charset="UTF-8"',
+                'Content-length': str(len(xml)),
+                "SOAPAction": "\"%s\"" % (soap_action)
+                }
+        if self.trace:
+            print "-"*80
+            print "POST %s" % location
+            print '\n'.join(["%s: %s" % (k,v) for k,v in headers.items()])
+            print u"\n%s" % xml.decode("utf8","ignore")
+        response, content = self.http.request(
+            location,"POST", body=xml, headers=headers )
+        self.response = response
+        self.content = content
+        if self.trace: 
+            print 
+            print '\n'.join(["%s: %s" % (k,v) for k,v in response.items()])
+            print content#.decode("utf8","ignore")
+            print "="*80
+        return content
+
+    def get_operation(self, method):
+        # try to find operation in wsdl file
+        soap_ver = self.__soap_ns == 'soap12' and 'soap12' or 'soap11'
+        if not self.service_port:
+            for service_name, service in self.services.items():
+                for port_name, port in [port for port in service['ports'].items()]:
+                    if port['soap_ver'] == soap_ver:
+                        self.service_port = service_name, port_name
+                        break
+                else:
+                    raise RuntimeError("Cannot determine service in WSDL: "
+                                       "SOAP version: %s" % soap_ver)
+        else:
+            port = self.services[self.service_port[0]]['ports'][self.service_port[1]]
+        self.location = port['location']
+        operation = port['operations'].get(unicode(method))
+        if not operation:
+            raise RuntimeError("Operation %s not found in WSDL: "
+                               "Service/Port Type: %s" %
+                               (method, self.service_port))
+        return operation
+    
+    def wsdl_call(self, method, *args, **kwargs):
+        "Pre and post process SOAP call, input and output parameters using WSDL"
+        soap_uri = soap_namespaces[self.__soap_ns]
+        operation = self.get_operation(method)
+        # get i/o type declarations:
+        input = operation['input']
+        output = operation['output']
+        if 'action' in operation:
+            self.action = operation['action']
+        # sort parameters (same order as xsd:sequence)
+        def sort_dict(od, d):
+            if isinstance(od, dict):
+                ret = OrderedDict()
+                for k in od.keys():
+                    v = d.get(k)
+                    if v:
+                        if isinstance(v, dict):
+                            v = sort_dict(od[k], v)
+                        elif isinstance(v, list):
+                            v = [sort_dict(od[k][0], v1) 
+                                    for v1 in v]
+                        ret[str(k)] = v 
+                return ret
+            else:
+                return d
+        if input and kwargs:
+            params = sort_dict(input.values()[0], kwargs).items()
+            method = input.keys()[0]
+        #elif not input:
+            #TODO: no message! (see wsmtxca.dummy) 
+        else:
+            params = kwargs and kwargs.items()
+        # call remote procedure
+        response = self.call(method, *params)
+        # parse results:
+        resp = response('Body',ns=soap_uri).children().unmarshall(output)
+        return resp and resp.values()[0] # pass Response tag children
+
+    def help(self, method):
+        "Return operation documentation and invocation/returned value example"
+        operation = self.get_operation(method)
+        input = operation['input'].values()
+        input = input and input[0]
+        output = operation['output'].values()[0] 
+        return u"%s(%s)\n -> %s:\n\n%s" % (
+            method, 
+            input and ", ".join("%s=%s" % (k,repr(v)) for k,v 
+                                 in input.items()) or "",
+            output and output or "",
+            operation.get("documentation",""),
+            )
+
+    def wsdl(self, url, debug=False, cache=False):
+        "Parse Web Service Description v1.1"
+        soap_ns = {
+            "http://schemas.xmlsoap.org/wsdl/soap/": 'soap11',
+            "http://schemas.xmlsoap.org/wsdl/soap12/": 'soap12',
+            }
+        wsdl_uri="http://schemas.xmlsoap.org/wsdl/"
+        xsd_uri="http://www.w3.org/2001/XMLSchema"
+        xsi_uri="http://www.w3.org/2001/XMLSchema-instance"
+        
+        get_local_name = lambda s: str((':' in s) and s.split(':')[1] or s)
+        
+        REVERSE_TYPE_MAP = dict([(v,k) for k,v in TYPE_MAP.items()])
+
+        def fetch(url):
+            "Fetch a document from a URL, save it locally if cache enabled"
+            import os, hashlib
+            # make md5 hash of the url for caching... 
+            filename = "%s.xml" % hashlib.md5(url).hexdigest()
+            if isinstance(cache, basestring):
+                filename = os.path.join(cache, filename) 
+            if cache and os.path.exists(filename):
+                if debug: print "Reading file %s" % (filename, )
+                f = open(filename, "r")
+                xml = f.read()
+                f.close()
+            else:
+                if debug: print "Fetching url %s" % (url, )
+                f = urllib.urlopen(url)
+                xml = f.read()
+                if cache:
+                    if debug: print "Writing file %s" % (filename, )
+                    f = open(filename, "w")
+                    f.write(xml)
+                    f.close()
+            return xml
+            
+        # Open uri and read xml:
+        xml = fetch(url)
+        # Parse WSDL XML:
+        wsdl = SimpleXMLElement(xml, namespace=wsdl_uri)
+
+        # detect soap prefix and uri (xmlns attributes of <definitions>)
+        xsd_ns = None
+        soap_uris = {}
+        for k, v in wsdl[:]:
+            if v in soap_ns and k.startswith("xmlns:"):
+                soap_uris[get_local_name(k)] = v
+            if v== xsd_uri and k.startswith("xmlns:"):
+                xsd_ns = get_local_name(k)
+
+        # Extract useful data:
+        self.namespace = wsdl['targetNamespace']
+        self.documentation = unicode(wsdl('documentation', error=False) or '')
+        
+        services = {}
+        bindings = {}           # binding_name: binding
+        operations = {}         # operation_name: operation
+        port_type_bindings = {} # port_type_name: binding
+        messages = {}           # message: element
+        elements = {}           # element: type def
+        
+        for service in wsdl.service:
+            service_name=service['name']
+            if not service_name:
+                continue # empty service?
+            if debug: print "Processing service", service_name
+            serv = services.setdefault(service_name, {'ports': {}})
+            serv['documentation']=service['documentation'] or ''
+            for port in service.port:
+                binding_name = get_local_name(port['binding'])
+                address = port('address', ns=soap_uris.values(), error=False)
+                location = address and address['location'] or None
+                soap_uri = address and soap_uris.get(address.get_prefix())
+                soap_ver = soap_uri and soap_ns.get(soap_uri)
+                bindings[binding_name] = {'service_name': service_name,
+                    'location': location,
+                    'soap_uri': soap_uri, 'soap_ver': soap_ver,
+                    }
+                serv['ports'][port['name']] = bindings[binding_name]
+             
+        for binding in wsdl.binding:
+            binding_name = binding['name']
+            if debug: print "Processing binding", service_name
+            soap_binding = binding('binding', ns=soap_uris.values(), error=False)
+            transport = soap_binding and soap_binding['transport'] or None
+            port_type_name = get_local_name(binding['type'])
+            bindings[binding_name].update({
+                'port_type_name': port_type_name,
+                'transport': transport, 'operations': {},
+                })
+            port_type_bindings[port_type_name] = bindings[binding_name]
+            for operation in binding.operation:
+                op_name = operation['name']
+                op = operation('operation',ns=soap_uris.values(), error=False)
+                action = op and op['soapAction']
+                d = operations.setdefault(op_name, {})
+                bindings[binding_name]['operations'][op_name] = d
+                d.update({'name': op_name})
+                #if action: #TODO: separe operation_binding from operation
+                if action:
+                    d["action"] = action
+        
+        #TODO: cleanup element/schema/types parsing:
+        def process_element(element_name, node):
+            "Parse and define simple element types"
+            if debug: print "Processing element", element_name
+            for tag in node:
+                if tag.get_local_name() in ("annotation", "documentation"):
+                    continue
+                elif tag.get_local_name() in ('element', 'restriction'):
+                    if debug: print element_name,"has not children!",tag
+                    children = tag # element "alias"?
+                    alias = True
+                elif tag.children():
+                    children = tag.children()
+                    alias = False
+                else:
+                    if debug: print element_name,"has not children!",tag
+                    continue #TODO: abstract?
+                d = OrderedDict()                    
+                for e in children:
+                    t = e['type']
+                    if not t:
+                        t = e['base'] # complexContent (extension)!
+                    if not t:
+                        t = 'anyType' # no type given!
+                    t = t.split(":")
+                    if len(t)>1:
+                        ns, type_name = t
+                    else:
+                        ns, type_name = None, t[0]
+                    if element_name == type_name:
+                        continue # prevent infinite recursion
+                    uri = ns and e.get_namespace_uri(ns) or xsd_uri
+                    if uri==xsd_uri:
+                        # look for the type, None == any
+                        fn = REVERSE_TYPE_MAP.get(unicode(type_name), None)
+                    else:
+                        # complex type, postprocess later
+                        fn = elements.setdefault(unicode(type_name), OrderedDict())
+                    if e['name'] is not None and not alias:
+                        e_name = unicode(e['name'])
+                        d[e_name] = fn
+                    else:
+                        if debug: print "complexConent/simpleType/element", element_name, "=", type_name
+                        d[None] = fn
+                    if e['maxOccurs']=="unbounded":
+                        # it's an array... TODO: compound arrays?
+                        d.array = True
+                    if e is not None and e.get_local_name() == 'extension' and e.children():
+                        # extend base element:
+                        process_element(element_name, e.children())
+                elements.setdefault(element_name, OrderedDict()).update(d)
+
+        # check axis2 namespace at schema types attributes
+        self.namespace = dict(wsdl.types("schema", ns=xsd_uri)[:]).get('targetNamespace', self.namespace) 
+
+        imported_schemas = {}
+
+        def preprocess_schema(schema):
+            "Find schema elements and complex types"
+            for element in schema.children():
+                if element.get_local_name() in ('import', ):
+                    schema_namespace = element['namespace']
+                    schema_location = element['schemaLocation']
+                    if schema_location is None:
+                        if debug: print "Schema location not provided for %s!" % (schema_namespace, )
+                        continue
+                    if schema_location in imported_schemas:
+                        if debug: print "Schema %s already imported!" % (schema_location, )
+                        continue
+                    imported_schemas[schema_location] = schema_namespace
+                    if debug: print "Importing schema %s from %s" % (schema_namespace, schema_location)
+                    # Open uri and read xml:
+                    xml = fetch(schema_location)
+                    # Parse imported XML schema (recursively):
+                    imported_schema = SimpleXMLElement(xml, namespace=xsd_uri)
+                    preprocess_schema(imported_schema)
+
+                if element.get_local_name() in ('element', 'complexType', "simpleType"):
+                    element_name = unicode(element['name'])
+                    if debug: print "Parsing Element %s: %s" % (element.get_local_name(),element_name)
+                    if element.get_local_name() == 'complexType':
+                        children = element.children()
+                    elif element.get_local_name() == 'simpleType':
+                        children = element("restriction", ns=xsd_uri)
+                    elif element.get_local_name() == 'element' and element['type']:
+                        children = element
+                    else:
+                        children = element.children()
+                        if children:
+                            children = children.children()
+                        elif element.get_local_name() == 'element':
+                            children = element
+                    if children:
+                        process_element(element_name, children)
+
+        def postprocess_element(elements):
+            "Fix unresolved references (elements referenced before its definition, thanks .net)"
+            for k,v in elements.items():
+                if isinstance(v, OrderedDict):
+                    if v.array:
+                        elements[k] = [v] # convert arrays to python lists
+                    if v!=elements: #TODO: fix recursive elements
+                        postprocess_element(v)
+                    if None in v and v[None]: # extension base?
+                        if isinstance(v[None], dict):
+                            for i, kk in enumerate(v[None]):
+                                # extend base -keep orginal order-
+                                elements[k].insert(kk, v[None][kk], i)
+                            del v[None]
+                        else:  # "alias", just replace
+                            if debug: print "Replacing ", k , " = ", v[None]
+                            elements[k] = v[None]
+                            #break
+                if isinstance(v, list):
+                    for n in v: # recurse list
+                        postprocess_element(n)
+
+                        
+        # process current wsdl schema:
+        for schema in wsdl.types("schema", ns=xsd_uri): 
+            preprocess_schema(schema)                
+
+        postprocess_element(elements)
+
+        for message in wsdl.message:
+            if debug: print "Processing message", message['name']
+            part = message('part', error=False)
+            element = {}
+            if part:
+                element_name = part['element']
+                if not element_name:
+                    element_name = part['type'] # some uses type instead
+                element_name = get_local_name(element_name)
+                element = {element_name: elements.get(element_name)}
+            messages[message['name']] = element
+        
+        for port_type in wsdl.portType:
+            port_type_name = port_type['name']
+            if debug: print "Processing port type", port_type_name
+            binding = port_type_bindings[port_type_name]
+
+            for operation in port_type.operation:
+                op_name = operation['name']
+                op = operations[op_name] 
+                op['documentation'] = unicode(operation('documentation', error=False) or '')
+                if binding['soap_ver']: 
+                    #TODO: separe operation_binding from operation (non SOAP?)
+                    input = get_local_name(operation.input['message'])
+                    output = get_local_name(operation.output['message'])
+                    op['input'] = messages[input]
+                    op['output'] = messages[output]
+
+        if debug:
+            import pprint
+            pprint.pprint(services)
+        
+        return services
+
+def parse_proxy(proxy_str):
+    "Parses proxy address user:pass@host:port into a dict suitable for httplib2"
+    proxy_dict = {}
+    if proxy_str is None:
+        return 
+    if "@" in proxy_str:
+        user_pass, host_port = proxy_str.split("@")
+    else:
+        user_pass, host_port = "", proxy_str
+    if ":" in host_port:
+        host, port = host_port.split(":")
+        proxy_dict['proxy_host'], proxy_dict['proxy_port'] = host, int(port)
+    if ":" in user_pass:
+        proxy_dict['proxy_user'], proxy_dict['proxy_pass'] = user_pass.split(":")
+    return proxy_dict
+    
+    
+if __name__=="__main__":
+    import sys
+    
+    if '--web2py' in sys.argv:
+        # test local sample webservice exposed by web2py
+        from client import SoapClient
+        if not '--wsdl' in sys.argv:
+            client = SoapClient(
+                location = "http://127.0.0.1:8000/webservices/sample/call/soap",
+                action = 'http://127.0.0.1:8000/webservices/sample/call/soap', # SOAPAction
+                namespace = "http://127.0.0.1:8000/webservices/sample/call/soap", 
+                soap_ns='soap', trace = True, ns = False, exceptions=True)
+        else:
+            client = SoapClient(wsdl="http://127.0.0.1:8000/webservices/sample/call/soap?WSDL",trace=True)
+        response = client.Dummy()
+        print 'dummy', response
+        response = client.Echo(value='hola')
+        print 'echo', repr(response)
+        response = client.AddIntegers(a=1,b=2)
+        if not '--wsdl' in sys.argv:
+            result = response.AddResult # manully convert returned type
+            print int(result)
+        else:
+            result = response['AddResult']
+            print result, type(result), "auto-unmarshalled"
+
+    if '--raw' in sys.argv:
+        # raw (unmarshalled parameter) local sample webservice exposed by web2py
+        from client import SoapClient
+        client = SoapClient(
+            location = "http://127.0.0.1:8000/webservices/sample/call/soap",
+            action = 'http://127.0.0.1:8000/webservices/sample/call/soap', # SOAPAction
+            namespace = "http://127.0.0.1:8000/webservices/sample/call/soap", 
+            soap_ns='soap', trace = True, ns = False)
+        params = SimpleXMLElement("""<?xml version="1.0" encoding="UTF-8"?><AddIntegers><a>3</a><b>2</b></AddIntegers>""") # manully convert returned type
+        response = client.call('AddIntegers',params)
+        result = response.AddResult 
+        print int(result) # manully convert returned type
+            
+    if '--ctg' in sys.argv:
+        # test AFIP Agriculture webservice
+        client = SoapClient(
+            location = "https://fwshomo.afip.gov.ar/wsctg/services/CTGService",
+            action = 'http://impl.service.wsctg.afip.gov.ar/CTGService/', # SOAPAction
+            namespace = "http://impl.service.wsctg.afip.gov.ar/CTGService/",
+            trace = True,
+            ns = True)
+        response = client.dummy()
+        result = response.dummyResponse
+        print str(result.appserver)
+        print str(result.dbserver)
+        print str(result.authserver)
+    
+    if '--wsfe' in sys.argv:
+        # Demo & Test (AFIP Electronic Invoice):
+        ta_file = open("TA.xml")
+        try:
+            ta_string = ta_file.read()   # read access ticket (wsaa.py)
+        finally:
+            ta_file.close()
+        ta = SimpleXMLElement(ta_string)
+        token = str(ta.credentials.token)
+        sign = str(ta.credentials.sign)
+        cuit = long(20267565393)
+        id = 1234
+        cbte =199
+        client = SoapClient(
+            location = "https://wswhomo.afip.gov.ar/wsfe/service.asmx",
+            action = 'http://ar.gov.afip.dif.facturaelectronica/', # SOAPAction
+            namespace = "http://ar.gov.afip.dif.facturaelectronica/",
+            trace = True)
+        results = client.FERecuperaQTYRequest(
+            argAuth= {"Token": token, "Sign": sign, "cuit":long(cuit)}
+        )
+        if int(results.FERecuperaQTYRequestResult.RError.percode) != 0:
+            print "Percode: %s" % results.FERecuperaQTYRequestResult.RError.percode
+            print "MSGerror: %s" % results.FERecuperaQTYRequestResult.RError.perrmsg
+        else:
+            print int(results.FERecuperaQTYRequestResult.qty.value)
+    
+    if '--feriados' in sys.argv:
+        # Demo & Test: Argentina Holidays (Ministerio del Interior):
+        # this webservice seems disabled
+        from datetime import datetime, timedelta
+        client = SoapClient(
+            location = "http://webservices.mininterior.gov.ar/Feriados/Service.svc",
+            action = 'http://tempuri.org/IMyService/', # SOAPAction
+            namespace = "http://tempuri.org/FeriadoDS.xsd",
+            trace = True)
+        dt1 = datetime.today() - timedelta(days=60)
+        dt2 = datetime.today() + timedelta(days=60)
+        feriadosXML = client.FeriadosEntreFechasas_xml(dt1=dt1.isoformat(), dt2=dt2.isoformat());
+        print feriadosXML
+
+    if '--wsdl-parse' in sys.argv:
+        client = SoapClient()
+        # Test PySimpleSOAP WSDL
+        client.wsdl("file:C:/test.wsdl", debug=True)
+        # Test Java Axis WSDL:
+        client.wsdl('https://wsaahomo.afip.gov.ar/ws/services/LoginCms?wsdl',debug=True)
+        # Test .NET 2.0 WSDL:
+        client.wsdl('https://wswhomo.afip.gov.ar/wsfe/service.asmx?WSDL',debug=True)
+        client.wsdl('https://wswhomo.afip.gov.ar/wsfex/service.asmx?WSDL',debug=True)
+        client.wsdl('https://testdia.afip.gov.ar/Dia/Ws/wDigDepFiel/wDigDepFiel.asmx?WSDL',debug=True)
+        # Test JBoss WSDL:
+        client.wsdl('https://fwshomo.afip.gov.ar/wsctg/services/CTGService?wsdl',debug=True)
+        client.wsdl('https://wsaahomo.afip.gov.ar/ws/services/LoginCms?wsdl',debug=True)
+
+    if '--wsdl-client' in sys.argv:
+        client = SoapClient(wsdl='https://wswhomo.afip.gov.ar/wsfex/service.asmx?WSDL',trace=True)
+        results = client.FEXDummy()
+        print results['FEXDummyResult']['AppServer']
+        print results['FEXDummyResult']['DbServer']
+        print results['FEXDummyResult']['AuthServer']
+        ta_file = open("TA.xml")
+        try:
+            ta_string = ta_file.read()   # read access ticket (wsaa.py)
+        finally:
+            ta_file.close()
+        ta = SimpleXMLElement(ta_string)
+        token = str(ta.credentials.token)
+        sign = str(ta.credentials.sign)
+        response = client.FEXGetCMP(
+            Auth={"Token": token, "Sign": sign, "Cuit": 20267565393},
+            Cmp={"Tipo_cbte": 19, "Punto_vta": 1, "Cbte_nro": 1}) 
+        result = response['FEXGetCMPResult']
+        if False: print result
+        if 'FEXErr' in result:
+            print "FEXError:", result['FEXErr']['ErrCode'], result['FEXErr']['ErrCode'] 
+        cbt = result['FEXResultGet']
+        print cbt['Cae']
+        FEX_event = result['FEXEvents']
+        print FEX_event['EventCode'], FEX_event['EventMsg']
+
+    if '--wsdl-ctg' in sys.argv:
+        client = SoapClient(wsdl='https://fwshomo.afip.gov.ar/wsctg/services/CTGService?wsdl',
+                            trace=True, ns = "ctg")
+        results = client.dummy()
+        print results
+        print results['DummyResponse']['appserver']
+        print results['DummyResponse']['dbserver']
+        print results['DummyResponse']['authserver']
+        ta_file = open("TA.xml")
+        try:
+            ta_string = ta_file.read()   # read access ticket (wsaa.py)
+        finally:
+            ta_file.close()
+        ta = SimpleXMLElement(ta_string)
+        token = str(ta.credentials.token)
+        sign = str(ta.credentials.sign)
+        print client.help("obtenerProvincias")
+        response = client.obtenerProvincias(auth={"token":token, "sign":sign, "cuitRepresentado":20267565393})
+        print "response=",response
+        for ret in response:
+            print ret['return']['codigoProvincia'], ret['return']['descripcionProvincia'].encode("latin1")
+        prueba = dict(numeroCartaDePorte=512345678, codigoEspecie=23,
+                cuitRemitenteComercial=20267565393, cuitDestino=20267565393, cuitDestinatario=20267565393, 
+                codigoLocalidadOrigen=3058, codigoLocalidadDestino=3059, 
+                codigoCosecha='0910', pesoNetoCarga=1000, cantHoras=1, 
+                patenteVehiculo='CZO985', cuitTransportista=20267565393,
+                numeroCTG="43816783", transaccion='10000001681', observaciones='',
+            )
+
+        response = client.solicitarCTG( 
+            auth={"token": token, "sign": sign, "cuitRepresentado": 20267565393},
+            solicitarCTGRequest= prueba)
+
+        print response['return']['numeroCTG']
+
+    ##print parse_proxy(None)
+    ##print parse_proxy("host:1234")
+    ##print parse_proxy("user:pass@host:1234")
+    ##sys.exit(0) 

ADDED   gluon/contrib/pysimplesoap/server.py
Index: gluon/contrib/pysimplesoap/server.py
==================================================================
--- /dev/null
+++ gluon/contrib/pysimplesoap/server.py
@@ -0,0 +1,454 @@
+#!/usr/bin/python
+# -*- coding: latin-1 -*-
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as published by the
+# Free Software Foundation; either version 3, or (at your option) any later
+# version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY
+# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+
+"Simple SOAP Server implementation"
+
+__author__ = "Mariano Reingart (reingart@gmail.com)"
+__copyright__ = "Copyright (C) 2010 Mariano Reingart"
+__license__ = "LGPL 3.0"
+__version__ = "1.02c"
+
+from simplexml import SimpleXMLElement, TYPE_MAP, DateTime, Date, Decimal
+
+DEBUG = False
+
+
+class SoapDispatcher(object):
+    "Simple Dispatcher for SOAP Server"
+    
+    def __init__(self, name, documentation='', action='', location='', 
+                 namespace=None, prefix=False, 
+                 soap_uri="http://schemas.xmlsoap.org/soap/envelope/", 
+                 soap_ns='soap',
+                 **kwargs):
+        self.methods = {}
+        self.name = name
+        self.documentation = documentation
+        self.action = action # base SoapAction
+        self.location = location
+        self.namespace = namespace # targetNamespace
+        self.prefix = prefix
+        self.soap_ns = soap_ns
+        self.soap_uri = soap_uri
+    
+    def register_function(self, name, fn, returns=None, args=None, doc=None):
+        self.methods[name] = fn, returns, args, doc or getattr(fn,"__doc__","")
+        
+    def dispatch(self, xml, action=None):
+        "Receive and proccess SOAP call"
+        # default values:
+        prefix = self.prefix
+        ret = fault = None
+        soap_ns, soap_uri = self.soap_ns, self.soap_uri
+        soap_fault_code = 'VersionMismatch'
+
+        try:
+            request = SimpleXMLElement(xml, namespace=self.namespace)
+
+            # detect soap prefix and uri (xmlns attributes of Envelope)
+            for k, v in request[:]:
+                if v in ("http://schemas.xmlsoap.org/soap/envelope/",
+                                  "http://www.w3.org/2003/05/soap-env",):
+                    soap_ns = request.attributes()[k].localName
+                    soap_uri = request.attributes()[k].value
+            
+            soap_fault_code = 'Client'
+            
+            # parse request message and get local method            
+            method = request('Body', ns=soap_uri).children()(0)
+            if action:
+                # method name = action 
+                name = action[len(self.action)+1:-1]
+                prefix = self.prefix
+            if not action or not name:
+                # method name = input message name
+                name = method.get_local_name()
+                prefix = method.get_prefix()
+
+            if DEBUG: print "dispatch method", name
+            function, returns_types, args_types, doc = self.methods[name]
+        
+            # de-serialize parameters (if type definitions given)
+            if args_types:
+                args = method.children().unmarshall(args_types)
+            elif args_types is None:
+                args = {'request':method} # send raw request
+            else:
+                args = {} # no parameters
+ 
+            soap_fault_code = 'Server'
+            # execute function
+            ret = function(**args)
+            if DEBUG: print ret
+
+        except Exception, e:
+            import sys
+            etype, evalue, etb = sys.exc_info()
+            if DEBUG: 
+                import traceback
+                detail = ''.join(traceback.format_exception(etype, evalue, etb))
+                detail += '\n\nXML REQUEST\n\n' + xml
+            else:
+                detail = None
+            fault = {'faultcode': "%s.%s" % (soap_fault_code, etype.__name__), 
+                     'faultstring': unicode(evalue), 
+                     'detail': detail}
+
+        # build response message
+        if not prefix:
+            xml = """<%(soap_ns)s:Envelope xmlns:%(soap_ns)s="%(soap_uri)s"/>"""  
+        else:
+            xml = """<%(soap_ns)s:Envelope xmlns:%(soap_ns)s="%(soap_uri)s"
+                       xmlns:%(prefix)s="%(namespace)s"/>"""  
+            
+        xml = xml % {'namespace': self.namespace, 'prefix': prefix,
+                     'soap_ns': soap_ns, 'soap_uri': soap_uri}
+
+        response = SimpleXMLElement(xml, namespace=self.namespace,
+                                    prefix=prefix)
+    
+        response['xmlns:xsi'] = "http://www.w3.org/2001/XMLSchema-instance"
+        response['xmlns:xsd'] = "http://www.w3.org/2001/XMLSchema"
+
+        body = response.add_child("%s:Body" % soap_ns, ns=False)
+        if fault:
+            # generate a Soap Fault (with the python exception)
+            body.marshall("%s:Fault" % soap_ns, fault, ns=False)
+        else:
+            # return normal value
+            res = body.add_child("%sResponse" % name, ns=prefix)
+            if not prefix:
+                res['xmlns'] = self.namespace # add target namespace
+
+            # serialize returned values (response) if type definition available
+            if returns_types:
+                if not isinstance(ret, dict):
+                    res.marshall(returns_types.keys()[0], ret, )
+                else:
+                    for k,v in ret.items():
+                        res.marshall(k, v)
+            elif returns_types is None:
+                # merge xmlelement returned
+                res.import_node(ret)
+
+        return response.as_xml()
+
+    # Introspection functions:
+
+    def list_methods(self):
+        "Return a list of aregistered operations"
+        return [(method, doc) for method, (function, returns, args, doc) in self.methods.items()] 
+
+    def help(self, method=None):
+        "Generate sample request and response messages"
+        (function, returns, args, doc) = self.methods[method]
+        xml = """
+<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
+<soap:Body><%(method)s xmlns="%(namespace)s"/></soap:Body>
+</soap:Envelope>"""  % {'method':method, 'namespace':self.namespace}
+        request = SimpleXMLElement(xml, namespace=self.namespace, prefix=self.prefix)
+        if args:
+            items = args.items()
+        elif args is None:
+            items = [('value', None)]
+        else:
+            items = []
+        for k,v in items:
+            request(method).marshall(k, v, add_comments=True, ns=False)
+
+        xml = """
+<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
+<soap:Body><%(method)sResponse xmlns="%(namespace)s"/></soap:Body>
+</soap:Envelope>"""  % {'method':method, 'namespace':self.namespace}
+        response = SimpleXMLElement(xml, namespace=self.namespace, prefix=self.prefix)
+        if returns:
+            items = returns.items()
+        elif args is None:
+            items = [('value', None)]
+        else:
+            items = []
+        for k,v in items:
+            response('%sResponse'%method).marshall(k, v, add_comments=True, ns=False)
+
+        return request.as_xml(pretty=True), response.as_xml(pretty=True), doc
+
+
+    def wsdl(self):
+        "Generate Web Service Description v1.1"
+        xml = """<?xml version="1.0"?>
+<wsdl:definitions name="%(name)s" 
+          targetNamespace="%(namespace)s"
+          xmlns:tns="%(namespace)s"
+          xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
+          xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
+          xmlns:xsd="http://www.w3.org/2001/XMLSchema">
+    <wsdl:documentation xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">%(documentation)s</wsdl:documentation>
+
+    <wsdl:types>
+       <xsd:schema targetNamespace="%(namespace)s"
+              elementFormDefault="qualified"
+              xmlns:xsd="http://www.w3.org/2001/XMLSchema">
+       </xsd:schema>
+    </wsdl:types>
+
+</wsdl:definitions>
+""" % {'namespace': self.namespace, 'name': self.name, 'documentation': self.documentation}
+        wsdl = SimpleXMLElement(xml)
+
+        for method, (function, returns, args, doc) in self.methods.items():
+            # create elements:
+                
+            def parse_element(name, values, array=False, complex=False):
+                if not complex:
+                    element = wsdl('wsdl:types')('xsd:schema').add_child('xsd:element')
+                    complex = element.add_child("xsd:complexType")
+                else:
+                    complex = wsdl('wsdl:types')('xsd:schema').add_child('xsd:complexType')
+                    element = complex
+                element['name'] = name
+                if values:
+                    items = values
+                elif values is None:
+                    items = [('value', None)]
+                else:
+                    items = []
+                if not array and items:
+                    all = complex.add_child("xsd:all")
+                elif items:
+                    all = complex.add_child("xsd:sequence")
+                for k,v in items:
+                    e = all.add_child("xsd:element")
+                    e['name'] = k
+                    if array:
+                        e[:]={'minOccurs': "0", 'maxOccurs': "unbounded"}
+                    if v in TYPE_MAP.keys():
+                        t='xsd:%s' % TYPE_MAP[v]
+                    elif v is None:
+                        t='xsd:anyType'
+                    elif isinstance(v, list):
+                        n="ArrayOf%s%s" % (name, k)
+                        l = []
+                        for d in v:
+                            l.extend(d.items())
+                        parse_element(n, l, array=True, complex=True)
+                        t = "tns:%s" % n
+                    elif isinstance(v, dict): 
+                        n="%s%s" % (name, k)
+                        parse_element(n, v.items(), complex=True)
+                        t = "tns:%s" % n
+                    e.add_attribute('type', t)
+            
+            parse_element("%s" % method, args and args.items())
+            parse_element("%sResponse" % method, returns and returns.items())
+
+            # create messages:
+            for m,e in ('Input',''), ('Output','Response'):
+                message = wsdl.add_child('wsdl:message')
+                message['name'] = "%s%s" % (method, m)
+                part = message.add_child("wsdl:part")
+                part[:] = {'name': 'parameters', 
+                           'element': 'tns:%s%s' % (method,e)}
+
+        # create ports
+        portType = wsdl.add_child('wsdl:portType')
+        portType['name'] = "%sPortType" % self.name
+        for method, (function, returns, args, doc) in self.methods.items():
+            op = portType.add_child('wsdl:operation')
+            op['name'] = method
+            if doc:
+                op.add_child("wsdl:documentation", doc)
+            input = op.add_child("wsdl:input")
+            input['message'] = "tns:%sInput" % method
+            output = op.add_child("wsdl:output")
+            output['message'] = "tns:%sOutput" % method
+
+        # create bindings
+        binding = wsdl.add_child('wsdl:binding')
+        binding['name'] = "%sBinding" % self.name
+        binding['type'] = "tns:%sPortType" % self.name
+        soapbinding = binding.add_child('soap:binding')
+        soapbinding['style'] = "document"
+        soapbinding['transport'] = "http://schemas.xmlsoap.org/soap/http"
+        for method in self.methods.keys():
+            op = binding.add_child('wsdl:operation')
+            op['name'] = method
+            soapop = op.add_child('soap:operation')
+            soapop['soapAction'] = self.action + method
+            soapop['style'] = 'document'
+            input = op.add_child("wsdl:input")
+            ##input.add_attribute('name', "%sInput" % method)
+            soapbody = input.add_child("soap:body")
+            soapbody["use"] = "literal"
+            output = op.add_child("wsdl:output")
+            ##output.add_attribute('name', "%sOutput" % method)
+            soapbody = output.add_child("soap:body")
+            soapbody["use"] = "literal"
+
+        service = wsdl.add_child('wsdl:service')
+        service["name"] = "%sService" % self.name
+        service.add_child('wsdl:documentation', text=self.documentation)
+        port=service.add_child('wsdl:port')
+        port["name"] = "%s" % self.name
+        port["binding"] = "tns:%sBinding" % self.name
+        soapaddress = port.add_child('soap:address')
+        soapaddress["location"] = self.location
+        return wsdl.as_xml(pretty=True)
+    
+
+from BaseHTTPServer import BaseHTTPRequestHandler, HTTPServer
+class SOAPHandler(BaseHTTPRequestHandler):
+    def do_GET(self):
+        "User viewable help information and wsdl"
+        args = self.path[1:].split("?")
+        print "serving", args
+        if self.path != "/" and args[0] not in self.server.dispatcher.methods.keys():
+            self.send_error(404, "Method not found: %s" % args[0])
+        else:
+            if self.path == "/":
+                # return wsdl if no method supplied
+                response = self.server.dispatcher.wsdl()
+            else:
+                # return supplied method help (?request or ?response messages)
+                req, res, doc = self.server.dispatcher.help(args[0])
+                if len(args)==1 or args[1]=="request":
+                    response = req
+                else:
+                    response = res                
+            self.send_response(200)
+            self.send_header("Content-type", "text/xml")
+            self.end_headers()
+            self.wfile.write(response)
+
+    def do_POST(self):
+        "SOAP POST gateway"
+        self.send_response(200)
+        self.send_header("Content-type", "text/xml")
+        self.end_headers()
+        request = self.rfile.read(int(self.headers.getheader('content-length')))
+        response = self.server.dispatcher.dispatch(request)
+        self.wfile.write(response)
+
+
+if __name__=="__main__":
+    import sys
+
+    dispatcher = SoapDispatcher(
+        name = "PySimpleSoapSample",
+        location = "http://localhost:8008/",
+        action = 'http://localhost:8008/', # SOAPAction
+        namespace = "http://example.com/pysimplesoapsamle/", prefix="ns0",
+        documentation = 'Example soap service using PySimpleSoap',
+        trace = True,
+        ns = True)
+    
+    def adder(p,c, dt=None):
+        "Add several values"
+        print c[0]['d'],c[1]['d'],
+        import datetime
+        dt = dt + datetime.timedelta(365)
+        return {'ab': p['a']+p['b'], 'dd': c[0]['d']+c[1]['d'], 'dt': dt}
+
+    def dummy(in0):
+        "Just return input"
+        return in0
+
+    def echo(request):
+        "Copy request->response (generic, any type)"
+        return request.value
+
+    dispatcher.register_function('Adder', adder,
+        returns={'AddResult': {'ab': int, 'dd': str } }, 
+        args={'p': {'a': int,'b': int}, 'dt': Date, 'c': [{'d': Decimal}]})
+
+    dispatcher.register_function('Dummy', dummy,
+        returns={'out0': str}, 
+        args={'in0': str})
+
+    dispatcher.register_function('Echo', echo)
+
+    if '--local' in sys.argv:
+
+        wsdl=dispatcher.wsdl()
+        print wsdl
+        testfile = open("C:/test.wsdl","w")
+        try:
+            testfile.write(wsdl)
+        finally:
+            testfile.close()
+        # dummy local test (clasic soap dialect)
+        xml = """<?xml version="1.0" encoding="UTF-8"?> 
+    <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
+       <soap:Body>
+         <Adder xmlns="http://example.com/sample.wsdl">
+           <p><a>1</a><b>2</b></p><c><d>5000000.1</d><d>.2</d></c><dt>20100724</dt>
+        </Adder>
+       </soap:Body>
+    </soap:Envelope>"""
+
+        print dispatcher.dispatch(xml)
+
+        # dummy local test (modern soap dialect, SoapUI)
+        xml = """
+<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:pys="http://example.com/pysimplesoapsamle/">
+   <soapenv:Header/>
+   <soapenv:Body>
+      <pys:Adder>
+         <pys:p><pys:a>9</pys:a><pys:b>3</pys:b></pys:p>
+         <pys:dt>19690720<!--1969-07-20T21:28:00--></pys:dt>
+         <pys:c><pys:d>10.001</pys:d><pys:d>5.02</pys:d></pys:c>
+      </pys:Adder>
+   </soapenv:Body>
+</soapenv:Envelope>
+    """
+        print dispatcher.dispatch(xml)
+
+        # echo local test (generic soap service)
+        xml = """<?xml version="1.0" encoding="UTF-8"?> 
+    <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"
+                   xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+                   xmlns:xsd="http://www.w3.org/2001/XMLSchema">
+       <soap:Body>
+         <Echo xmlns="http://example.com/sample.wsdl">
+           <value xsi:type="xsd:string">Hello world</value>
+        </Echo>
+       </soap:Body>
+    </soap:Envelope>"""
+
+        print dispatcher.dispatch(xml)
+
+
+        for method, doc in dispatcher.list_methods():
+            request, response, doc = dispatcher.help(method)
+            ##print request
+            ##print response
+            
+    if '--serve' in sys.argv:
+        print "Starting server..."
+        httpd = HTTPServer(("", 8008), SOAPHandler)
+        httpd.dispatcher = dispatcher
+        httpd.serve_forever()
+
+    if '--consume' in sys.argv:
+        from client import SoapClient
+        client = SoapClient(
+            location = "http://localhost:8008/",
+            action = 'http://localhost:8008/', # SOAPAction
+            namespace = "http://example.com/sample.wsdl", 
+            soap_ns='soap',
+            trace = True,
+            ns = False)
+        response = client.Adder(p={'a':1,'b':2},dt='20100724',c=[{'d':'1.20'},{'d':'2.01'}])
+        result = response.AddResult
+        print int(result.ab)
+        print str(result.dd)
+
+

ADDED   gluon/contrib/pysimplesoap/simplexml.py
Index: gluon/contrib/pysimplesoap/simplexml.py
==================================================================
--- /dev/null
+++ gluon/contrib/pysimplesoap/simplexml.py
@@ -0,0 +1,415 @@
+#!/usr/bin/python
+# -*- coding: latin-1 -*-
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as published by the
+# Free Software Foundation; either version 3, or (at your option) any later
+# version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY
+# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+
+"Simple XML manipulation"
+
+__author__ = "Mariano Reingart (reingart@gmail.com)"
+__copyright__ = "Copyright (C) 2008/009 Mariano Reingart"
+__license__ = "LGPL 3.0"
+__version__ = "1.02c"
+
+import xml.dom.minidom
+from decimal import Decimal
+import datetime 
+import time
+
+DEBUG = False
+
+# Functions to serialize/unserialize special immutable types:
+datetime_u = lambda s: datetime.datetime.strptime(s, "%Y-%m-%dT%H:%M:%S")
+datetime_m = lambda dt: dt.isoformat('T')
+date_u = lambda s: datetime.datetime.strptime(s[0:10], "%Y-%m-%d").date()
+date_m = lambda d: d.strftime("%Y-%m-%d")
+time_u = lambda s: datetime.datetime.strptime(s, "%H:%M:%S").time()
+time_m = lambda d: d.strftime("%H%M%S")
+bool_u = lambda s: {'0':False, 'false': False, '1': True, 'true': True}[s]
+
+# aliases:
+class Alias():
+    def __init__(self, py_type, xml_type):
+        self.py_type, self.xml_type = py_type, xml_type
+    def __call__(self, value):
+        return self.py_type(value)
+    def __repr__(self):
+        return "<alias '%s' for '%s'>" % (self.xml_type, self.py_type)
+        
+byte = Alias(str,'byte')
+short = Alias(int,'short')
+double = Alias(float,'double')
+integer = Alias(long,'integer')
+DateTime = datetime.datetime
+Date = datetime.date
+Time = datetime.time
+
+# Define convertion function (python type): xml schema type
+TYPE_MAP = {str:'string',unicode:'string',
+            bool:'boolean', short:'short', byte:'byte',
+            int:'int', long:'long', integer:'integer', 
+            float:'float', double:'double',
+            Decimal:'decimal',
+            datetime.datetime:'dateTime', datetime.date:'date',
+            }
+TYPE_MARSHAL_FN = {datetime.datetime:datetime_m, datetime.date:date_m,}
+TYPE_UNMARSHAL_FN = {datetime.datetime:datetime_u, datetime.date:date_u,
+                     bool:bool_u,
+            }
+
+
+class OrderedDict(dict):
+    "Minimal ordered dictionary for xsd:sequences"
+    def __init__(self):
+        self.__keys = []
+        self.array = False
+    def __setitem__(self, key, value):
+        if key not in self.__keys:
+            self.__keys.append(key)
+        dict.__setitem__(self, key, value)
+    def insert(self, key, value, index=0):
+        if key not in self.__keys:
+            self.__keys.insert(index, key)
+        dict.__setitem__(self, key, value)
+    def __delitem__(self, key):
+        if key in self.__keys:
+            self.__keys.remove(key)
+        dict.__delitem__(self, key)
+    def __iter__(self):
+        return iter(self.__keys)
+    def keys(self):
+        return self.__keys
+    def items(self):
+        return [(key, self[key]) for key in self.__keys]
+    def update(self, other):
+        for k,v in other.items():
+            self[k] = v
+        if isinstance(other, OrderedDict):
+            self.array = other.array
+    def __str__(self):
+        return "*%s*" % dict.__str__(self)
+    def __repr__(self):
+        s= "*{%s}*" % ", ".join(['%s: %s' % (repr(k),repr(v)) for k,v in self.items()])
+        if self.array and False:
+            s = "[%s]" % s
+        return s
+
+
+class SimpleXMLElement(object):
+    "Simple XML manipulation (simil PHP)"
+    
+    def __init__(self, text = None, elements = None, document = None, namespace = None, prefix=None):
+        self.__ns = namespace
+        self.__prefix = prefix
+        if text:
+            try:
+                self.__document = xml.dom.minidom.parseString(text)
+            except:
+                if DEBUG: print text
+                raise
+            self.__elements = [self.__document.documentElement]
+        else:
+            self.__elements = elements
+            self.__document = document
+    
+    def add_child(self,name,text=None,ns=True):
+        "Adding a child tag to a node"
+        if not ns or not self.__ns:
+            if DEBUG: print "adding %s" % (name)
+            element = self.__document.createElement(name)
+        else:
+            if DEBUG: print "adding %s ns %s %s" % (name, self.__ns,ns)
+            if self.__prefix:
+                element = self.__document.createElementNS(self.__ns, "%s:%s" % (self.__prefix, name))
+            else:
+                element = self.__document.createElementNS(self.__ns, name)
+        if text:
+            if isinstance(text, unicode):
+                element.appendChild(self.__document.createTextNode(text))
+            else:
+                element.appendChild(self.__document.createTextNode(str(text)))
+        self._element.appendChild(element)
+        return SimpleXMLElement(
+                    elements=[element],
+                    document=self.__document,
+                    namespace=self.__ns,
+                    prefix=self.__prefix)
+    
+    def __setattr__(self, tag, text):
+        "Add text child tag node (short form)"
+        if tag.startswith("_"):
+            object.__setattr__(self, tag, text)
+        else:
+            if DEBUG: print "__setattr__(%s,%s)" % (tag, text)
+            self.add_child(tag,text)
+
+    def add_comment(self, data):
+        "Add an xml comment to this child"
+        comment = self.__document.createComment(data)
+        self._element.appendChild(comment)
+
+    def as_xml(self,filename=None,pretty=False):
+        "Return the XML representation of the document"
+        if not pretty:
+            return self.__document.toxml('UTF-8')
+        else:
+            return self.__document.toprettyxml(encoding='UTF-8')
+
+    def __repr__(self):
+        "Return the XML representation of this tag"
+        return self._element.toxml('UTF-8')
+
+    def get_name(self):
+        "Return the tag name of this node"
+        return self._element.tagName
+
+    def get_local_name(self):
+        "Return the tag loca name (prefix:name) of this node"
+        return self._element.localName
+
+    def get_prefix(self):
+        "Return the namespace prefix of this node"
+        return self._element.prefix
+
+    def get_namespace_uri(self, ns):
+        "Return the namespace uri for a prefix"
+        v = self.__document.documentElement.attributes['xmlns:%s' % ns]
+        return v.value
+
+    def attributes(self):
+        "Return a dict of attributes for this tag"
+        #TODO: use slice syntax [:]?
+        return self._element.attributes
+
+    def __getitem__(self, item):
+        "Return xml tag attribute value or a slice of attributes (iter)"
+        if DEBUG: print "__getitem__(%s)" % item 
+        if isinstance(item,basestring):
+            if self._element.hasAttribute(item):
+                return self._element.attributes[item].value
+        elif isinstance(item, slice):
+            # return a list with name:values
+            return self._element.attributes.items()[item]
+        else:
+            # return element by index (position)
+            element = self.__elements[item]
+            return SimpleXMLElement(
+                    elements=[element],
+                    document=self.__document,
+                    namespace=self.__ns,
+                    prefix=self.__prefix)
+            
+    def add_attribute(self, name, value):
+        "Set an attribute value from a string"
+        self._element.setAttribute(name, value)
+ 
+    def __setitem__(self, item, value):
+        "Set an attribute value"
+        if isinstance(item,basestring):
+            self.add_attribute(item, value)
+        elif isinstance(item, slice):
+            # set multiple attributes at once
+            for k, v in value.items():
+                self.add_attribute(k, v)
+
+    def __call__(self, tag=None, ns=None, children=False, error=True):
+        "Search (even in child nodes) and return a child tag by name"
+        try:
+            if tag is None:
+                # if no name given, iterate over siblings (same level)
+                return self.__iter__()
+            if children:
+                # future: filter children? by ns?
+                return self.children()
+            elements = None
+            if isinstance(tag, int):
+                # return tag by index
+                elements=[self.__elements[tag]]
+            if ns and not elements:
+                for ns_uri in isinstance(ns, (tuple, list)) and ns or (ns, ):
+                    if DEBUG: print "searching %s by ns=%s" % (tag,ns_uri)
+                    elements = self._element.getElementsByTagNameNS(ns_uri, tag)
+                    if elements: 
+                        break
+            if self.__ns and not elements:
+                if DEBUG: print "searching %s by ns=%s" % (tag, self.__ns)
+                elements = self._element.getElementsByTagNameNS(self.__ns, tag)
+            if not elements:
+                if DEBUG: print "searching %s " % (tag)
+                elements = self._element.getElementsByTagName(tag)
+            if not elements:
+                if DEBUG: print self._element.toxml()
+                if error:
+                    raise AttributeError("No elements found")
+                else:
+                    return
+            return SimpleXMLElement(
+                elements=elements,
+                document=self.__document,
+                namespace=self.__ns,
+                prefix=self.__prefix)
+        except AttributeError, e:
+            raise AttributeError("Tag not found: %s (%s)" % (tag, str(e)))
+
+    def __getattr__(self, tag):
+        "Shortcut for __call__"
+        return self.__call__(tag)
+        
+    def __iter__(self):
+        "Iterate over xml tags at this level"
+        try:
+            for __element in self.__elements:
+                yield SimpleXMLElement(
+                    elements=[__element],
+                    document=self.__document,
+                    namespace=self.__ns,
+                    prefix=self.__prefix)
+        except:
+            raise
+
+    def __dir__(self):
+        "List xml children tags names"
+        return [node.tagName for node 
+                in self._element.childNodes
+                if node.nodeType != node.TEXT_NODE]
+
+    def children(self):
+        "Return xml children tags element"
+        elements=[__element for __element in self._element.childNodes
+                          if __element.nodeType == __element.ELEMENT_NODE]
+        if not elements:
+            return None
+            #raise IndexError("Tag %s has no children" % self._element.tagName)
+        return SimpleXMLElement(
+                elements=elements,
+                document=self.__document,
+                namespace=self.__ns,
+                prefix=self.__prefix)
+
+    def __len__(self):
+        "Return elements count"
+        return len(self.__elements)
+        
+    def __contains__( self, item):
+        "Search for a tag name in this element or child nodes"
+        return self._element.getElementsByTagName(item)
+    
+    def __unicode__(self):
+        "Returns the unicode text nodes of the current element"
+        if self._element.childNodes:
+            rc = u""
+            for node in self._element.childNodes:
+                if node.nodeType == node.TEXT_NODE:
+                    rc = rc + node.data
+            return rc
+        return ''
+    
+    def __str__(self):
+        "Returns the str text nodes of the current element"
+        return unicode(self).encode("utf8","ignore")
+
+    def __int__(self):
+        "Returns the integer value of the current element"
+        return int(self.__str__())
+
+    def __float__(self):
+        "Returns the float value of the current element"
+        try:
+            return float(self.__str__())
+        except:
+            raise IndexError(self._element.toxml())    
+    
+    _element = property(lambda self: self.__elements[0])
+
+    def unmarshall(self, types):
+        "Convert to python values the current serialized xml element"
+        # types is a dict of {tag name: convertion function}
+        # example: types={'p': {'a': int,'b': int}, 'c': [{'d':str}]}
+        #   expected xml: <p><a>1</a><b>2</b></p><c><d>hola</d><d>chau</d>
+        #   returnde value: {'p': {'a':1,'b':2}, `'c':[{'d':'hola'},{'d':'chau'}]}
+        d = {}
+        for node in self():
+            name = str(node.get_local_name())
+            try:
+                fn = types[name]
+            except (KeyError, ), e:
+                raise TypeError("Tag: %s invalid" % (name,))
+            if isinstance(fn,list):
+                value = []
+                children = node.children()
+                for child in children and children() or []:
+                    value.append(child.unmarshall(fn[0]))
+            elif isinstance(fn,dict):
+                children = node.children()
+                value = children and children.unmarshall(fn)
+            else:
+                if fn is None: # xsd:anyType not unmarshalled
+                    value = node
+                elif str(node) or fn == str:
+                    try:
+                        # get special desserialization function (if any)
+                        fn = TYPE_UNMARSHAL_FN.get(fn,fn) 
+                        value = fn(unicode(node))
+                    except (ValueError, TypeError), e:
+                        raise ValueError("Tag: %s: %s" % (name, unicode(e)))
+                else:
+                    value = None
+            d[name] = value
+        return d
+
+    def marshall(self, name, value, add_child=True, add_comments=False, ns=False):
+        "Analize python value and add the serialized XML element using tag name"
+        if isinstance(value, dict):  # serialize dict (<key>value</key>)
+            child = add_child and self.add_child(name,ns=ns) or self
+            for k,v in value.items():
+                child.marshall(k, v, add_comments=add_comments, ns=ns)
+        elif isinstance(value, tuple):  # serialize tuple (<key>value</key>)
+            child = add_child and self.add_child(name,ns=ns) or self
+            for k,v in value:
+                getattr(self,name).marshall(k, v, add_comments=add_comments, ns=ns)
+        elif isinstance(value, list): # serialize lists
+            child=self.add_child(name,ns=ns)
+            if add_comments:
+                child.add_comment("Repetitive array of:")
+            for t in value:
+                child.marshall(name,t, False, add_comments=add_comments, ns=ns)
+        elif isinstance(value, basestring): # do not convert strings or unicodes
+            self.add_child(name,value,ns=ns)
+        elif value is None: # sent a empty tag?
+            self.add_child(name,ns=ns)
+        elif value in TYPE_MAP.keys():
+            # add commented placeholders for simple tipes (for examples/help only)
+            child = self.add_child(name,ns=ns) 
+            child.add_comment(TYPE_MAP[value])
+        else: # the rest of object types are converted to string 
+            # get special serialization function (if any)
+            fn = TYPE_MARSHAL_FN.get(type(value),str)
+            self.add_child(name,fn(value),ns=ns) 
+
+    def import_node(self, other):
+        x = self.__document.importNode(other._element, True)  # deep copy
+        self._element.appendChild(x)
+
+
+if __name__ == "__main__":
+    span = SimpleXMLElement('<span><a href="python.org.ar">pyar</a><prueba><i>1</i><float>1.5</float></prueba></span>')
+    assert str(span.a)==str(span('a'))==str(span.a(0))=="pyar"
+    assert span.a['href']=="python.org.ar"
+    assert int(span.prueba.i)==1 and float(span.prueba.float)==1.5
+    span1 = SimpleXMLElement('<span><a href="google.com">google</a><a>yahoo</a><a>hotmail</a></span>')
+    assert [str(a) for a in span1.a()] == ['google', 'yahoo', 'hotmail']
+    span1.add_child('a','altavista')
+    span1.b = "ex msn"
+    d = {'href':'http://www.bing.com/', 'alt': 'Bing'} 
+    span1.b[:] = d
+    assert sorted([(k,v) for k,v in span1.b[:]]) == sorted(d.items())
+    print span1.as_xml()
+    assert 'b' in span1
+    span.import_node(span1)
+    print span.as_xml()

ADDED   gluon/contrib/rss2.py
Index: gluon/contrib/rss2.py
==================================================================
--- /dev/null
+++ gluon/contrib/rss2.py
@@ -0,0 +1,589 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""PyRSS2Gen - A Python library for generating RSS 2.0 feeds."""
+
+__name__ = 'PyRSS2Gen'
+__version__ = (1, 0, 0)
+__author__ = 'Andrew Dalke <dalke@dalkescientific.com>'
+
+_generator_name = __name__ + '-' + '.'.join(map(str, __version__))
+
+import datetime
+import cStringIO
+
+# Could make this the base class; will need to add 'publish'
+
+
+class WriteXmlMixin:
+
+    def write_xml(self, outfile, encoding='iso-8859-1'):
+        from xml.sax import saxutils
+        handler = saxutils.XMLGenerator(outfile, encoding)
+        handler.startDocument()
+        self.publish(handler)
+        handler.endDocument()
+
+    def to_xml(self, encoding='iso-8859-1'):
+        try:
+            import cStringIO as StringIO
+        except ImportError:
+            import StringIO
+        f = StringIO.StringIO()
+        self.write_xml(f, encoding)
+        return f.getvalue()
+
+
+def _element(
+    handler,
+    name,
+    obj,
+    d={},
+    ):
+    if isinstance(obj, basestring) or obj is None:
+
+        # special-case handling to make the API easier
+        # to use for the common case.
+
+        handler.startElement(name, d)
+        if obj is not None:
+            handler.characters(obj)
+        handler.endElement(name)
+    else:
+
+        # It better know how to emit the correct XML.
+
+        obj.publish(handler)
+
+
+def _opt_element(handler, name, obj):
+    if obj is None:
+        return
+    _element(handler, name, obj)
+
+
+def _format_date(dt):
+    """convert a datetime into an RFC 822 formatted date
+
+    Input date must be in GMT.
+    """
+
+    # Looks like:
+    #   Sat, 07 Sep 2002 00:00:01 GMT
+    # Can't use strftime because that's locale dependent
+    #
+    # Isn't there a standard way to do this for Python?  The
+    # rfc822 and email.Utils modules assume a timestamp.  The
+    # following is based on the rfc822 module.
+
+    return '%s, %02d %s %04d %02d:%02d:%02d GMT' % (
+        [
+            'Mon',
+            'Tue',
+            'Wed',
+            'Thu',
+            'Fri',
+            'Sat',
+            'Sun',
+            ][dt.weekday()],
+        dt.day,
+        [
+            'Jan',
+            'Feb',
+            'Mar',
+            'Apr',
+            'May',
+            'Jun',
+            'Jul',
+            'Aug',
+            'Sep',
+            'Oct',
+            'Nov',
+            'Dec',
+            ][dt.month - 1],
+        dt.year,
+        dt.hour,
+        dt.minute,
+        dt.second,
+        )
+
+
+##
+# A couple simple wrapper objects for the fields which
+# take a simple value other than a string.
+
+
+class IntElement:
+
+    """implements the 'publish' API for integers
+
+    Takes the tag name and the integer value to publish.
+
+    (Could be used for anything which uses str() to be published
+    to text for XML.)
+    """
+
+    element_attrs = {}
+
+    def __init__(self, name, val):
+        self.name = name
+        self.val = val
+
+    def publish(self, handler):
+        handler.startElement(self.name, self.element_attrs)
+        handler.characters(str(self.val))
+        handler.endElement(self.name)
+
+
+class DateElement:
+
+    """implements the 'publish' API for a datetime.datetime
+
+    Takes the tag name and the datetime to publish.
+
+    Converts the datetime to RFC 2822 timestamp (4-digit year).
+    """
+
+    def __init__(self, name, dt):
+        self.name = name
+        self.dt = dt
+
+    def publish(self, handler):
+        _element(handler, self.name, _format_date(self.dt))
+
+
+# ###
+
+
+class Category:
+
+    """Publish a category element"""
+
+    def __init__(self, category, domain=None):
+        self.category = category
+        self.domain = domain
+
+    def publish(self, handler):
+        d = {}
+        if self.domain is not None:
+            d['domain'] = self.domain
+        _element(handler, 'category', self.category, d)
+
+
+class Cloud:
+
+    """Publish a cloud"""
+
+    def __init__(
+        self,
+        domain,
+        port,
+        path,
+        registerProcedure,
+        protocol,
+        ):
+        self.domain = domain
+        self.port = port
+        self.path = path
+        self.registerProcedure = registerProcedure
+        self.protocol = protocol
+
+    def publish(self, handler):
+        _element(handler, 'cloud', None, {
+            'domain': self.domain,
+            'port': str(self.port),
+            'path': self.path,
+            'registerProcedure': self.registerProcedure,
+            'protocol': self.protocol,
+            })
+
+
+class Image:
+
+    """Publish a channel Image"""
+
+    element_attrs = {}
+
+    def __init__(
+        self,
+        url,
+        title,
+        link,
+        width=None,
+        height=None,
+        description=None,
+        ):
+        self.url = url
+        self.title = title
+        self.link = link
+        self.width = width
+        self.height = height
+        self.description = description
+
+    def publish(self, handler):
+        handler.startElement('image', self.element_attrs)
+
+        _element(handler, 'url', self.url)
+        _element(handler, 'title', self.title)
+        _element(handler, 'link', self.link)
+
+        width = self.width
+        if isinstance(width, int):
+            width = IntElement('width', width)
+        _opt_element(handler, 'width', width)
+
+        height = self.height
+        if isinstance(height, int):
+            height = IntElement('height', height)
+        _opt_element(handler, 'height', height)
+
+        _opt_element(handler, 'description', self.description)
+
+        handler.endElement('image')
+
+
+class Guid:
+
+    """Publish a guid
+
+    Defaults to being a permalink, which is the assumption if it's
+    omitted.  Hence strings are always permalinks.
+    """
+
+    def __init__(self, guid, isPermaLink=1):
+        self.guid = guid
+        self.isPermaLink = isPermaLink
+
+    def publish(self, handler):
+        d = {}
+        if self.isPermaLink:
+            d['isPermaLink'] = 'true'
+        else:
+            d['isPermaLink'] = 'false'
+        _element(handler, 'guid', self.guid, d)
+
+
+class TextInput:
+
+    """Publish a textInput
+
+    Apparently this is rarely used.
+    """
+
+    element_attrs = {}
+
+    def __init__(
+        self,
+        title,
+        description,
+        name,
+        link,
+        ):
+        self.title = title
+        self.description = description
+        self.name = name
+        self.link = link
+
+    def publish(self, handler):
+        handler.startElement('textInput', self.element_attrs)
+        _element(handler, 'title', self.title)
+        _element(handler, 'description', self.description)
+        _element(handler, 'name', self.name)
+        _element(handler, 'link', self.link)
+        handler.endElement('textInput')
+
+
+class Enclosure:
+
+    """Publish an enclosure"""
+
+    def __init__(
+        self,
+        url,
+        length,
+        type,
+        ):
+        self.url = url
+        self.length = length
+        self.type = type
+
+    def publish(self, handler):
+        _element(handler, 'enclosure', None,
+            {'url': self.url, 'length': str(self.length), 'type': self.type})
+
+
+class Source:
+
+    """Publish the item's original source, used by aggregators"""
+
+    def __init__(self, name, url):
+        self.name = name
+        self.url = url
+
+    def publish(self, handler):
+        _element(handler, 'source', self.name, {'url': self.url})
+
+
+class SkipHours:
+
+    """Publish the skipHours
+
+    This takes a list of hours, as integers.
+    """
+
+    element_attrs = {}
+
+    def __init__(self, hours):
+        self.hours = hours
+
+    def publish(self, handler):
+        if self.hours:
+            handler.startElement('skipHours', self.element_attrs)
+            for hour in self.hours:
+                _element(handler, 'hour', str(hour))
+            handler.endElement('skipHours')
+
+
+class SkipDays:
+
+    """Publish the skipDays
+
+    This takes a list of days as strings.
+    """
+
+    element_attrs = {}
+
+    def __init__(self, days):
+        self.days = days
+
+    def publish(self, handler):
+        if self.days:
+            handler.startElement('skipDays', self.element_attrs)
+            for day in self.days:
+                _element(handler, 'day', day)
+            handler.endElement('skipDays')
+
+
+class RSS2(WriteXmlMixin):
+
+    """The main RSS class.
+
+    Stores the channel attributes, with the \"category\" elements under
+    \".categories\" and the RSS items under \".items\".
+    """
+
+    rss_attrs = {'version': '2.0'}
+    element_attrs = {}
+
+    def __init__(
+        self,
+        title,
+        link,
+        description,
+        language=None,
+        copyright=None,
+        managingEditor=None,
+        webMaster=None,
+        pubDate=None,
+        lastBuildDate=None,
+        categories=None,
+        generator=_generator_name,
+        docs='http://blogs.law.harvard.edu/tech/rss',
+        cloud=None,
+        ttl=None,
+        image=None,
+        rating=None,
+        textInput=None,
+        skipHours=None,
+        skipDays=None,
+        items=None,
+        ):
+
+        self.title = title
+        self.link = link
+        self.description = description
+        self.language = language
+        self.copyright = copyright
+        self.managingEditor = managingEditor
+
+        self.webMaster = webMaster
+        self.pubDate = pubDate
+        self.lastBuildDate = lastBuildDate
+
+        if categories is None:
+            categories = []
+        self.categories = categories
+        self.generator = generator
+        self.docs = docs
+        self.cloud = cloud
+        self.ttl = ttl
+        self.image = image
+        self.rating = rating
+        self.textInput = textInput
+        self.skipHours = skipHours
+        self.skipDays = skipDays
+
+        if items is None:
+            items = []
+        self.items = items
+
+    def publish(self, handler):
+        handler.startElement('rss', self.rss_attrs)
+        handler.startElement('channel', self.element_attrs)
+        _element(handler, 'title', self.title)
+        _element(handler, 'link', self.link)
+        _element(handler, 'description', self.description)
+
+        self.publish_extensions(handler)
+
+        _opt_element(handler, 'language', self.language)
+        _opt_element(handler, 'copyright', self.copyright)
+        _opt_element(handler, 'managingEditor', self.managingEditor)
+        _opt_element(handler, 'webMaster', self.webMaster)
+
+        pubDate = self.pubDate
+        if isinstance(pubDate, datetime.datetime):
+            pubDate = DateElement('pubDate', pubDate)
+        _opt_element(handler, 'pubDate', pubDate)
+
+        lastBuildDate = self.lastBuildDate
+        if isinstance(lastBuildDate, datetime.datetime):
+            lastBuildDate = DateElement('lastBuildDate', lastBuildDate)
+        _opt_element(handler, 'lastBuildDate', lastBuildDate)
+
+        for category in self.categories:
+            if isinstance(category, basestring):
+                category = Category(category)
+            category.publish(handler)
+
+        _opt_element(handler, 'generator', self.generator)
+        _opt_element(handler, 'docs', self.docs)
+
+        if self.cloud is not None:
+            self.cloud.publish(handler)
+
+        ttl = self.ttl
+        if isinstance(self.ttl, int):
+            ttl = IntElement('ttl', ttl)
+        _opt_element(handler, 'tt', ttl)
+
+        if self.image is not None:
+            self.image.publish(handler)
+
+        _opt_element(handler, 'rating', self.rating)
+        if self.textInput is not None:
+            self.textInput.publish(handler)
+        if self.skipHours is not None:
+            self.skipHours.publish(handler)
+        if self.skipDays is not None:
+            self.skipDays.publish(handler)
+
+        for item in self.items:
+            item.publish(handler)
+
+        handler.endElement('channel')
+        handler.endElement('rss')
+
+    def publish_extensions(self, handler):
+
+        # Derived classes can hook into this to insert
+        # output after the three required fields.
+
+        pass
+
+
+class RSSItem(WriteXmlMixin):
+
+    """Publish an RSS Item"""
+
+    element_attrs = {}
+
+    def __init__(
+        self,
+        title=None,
+        link=None,
+        description=None,
+        author=None,
+        categories=None,
+        comments=None,
+        enclosure=None,
+        guid=None,
+        pubDate=None,
+        source=None,
+        ):
+
+        if title is None and description is None:
+            raise TypeError(
+                "RSSItem must define at least one of 'title' or 'description'")
+        self.title = title
+        self.link = link
+        self.description = description
+        self.author = author
+        if categories is None:
+            categories = []
+        self.categories = categories
+        self.comments = comments
+        self.enclosure = enclosure
+        self.guid = guid
+        self.pubDate = pubDate
+        self.source = source
+
+        # It sure does get tedious typing these names three times...
+
+    def publish(self, handler):
+        handler.startElement('item', self.element_attrs)
+        _opt_element(handler, 'title', self.title)
+        _opt_element(handler, 'link', self.link)
+        self.publish_extensions(handler)
+        _opt_element(handler, 'description', self.description)
+        _opt_element(handler, 'author', self.author)
+
+        for category in self.categories:
+            if isinstance(category, basestring):
+                category = Category(category)
+            category.publish(handler)
+
+        _opt_element(handler, 'comments', self.comments)
+        if self.enclosure is not None:
+            self.enclosure.publish(handler)
+        _opt_element(handler, 'guid', self.guid)
+
+        pubDate = self.pubDate
+        if isinstance(pubDate, datetime.datetime):
+            pubDate = DateElement('pubDate', pubDate)
+        _opt_element(handler, 'pubDate', pubDate)
+
+        if self.source is not None:
+            self.source.publish(handler)
+
+        handler.endElement('item')
+
+    def publish_extensions(self, handler):
+
+        # Derived classes can hook into this to insert
+        # output after the title and link elements
+
+        pass
+
+
+def dumps(rss, encoding='utf-8'):
+    s = cStringIO.StringIO()
+    rss.write_xml(s, encoding)
+    return s.getvalue()
+
+
+def test():
+    rss = RSS2(title='web2py feed', link='http://www.web2py.com',
+               description='About web2py',
+               lastBuildDate=datetime.datetime.now(),
+               items=[RSSItem(title='web2py and PyRSS2Gen-0.0',
+               link='http://www.web2py.com/examples/simple_examples/getrss',
+               description='web2py can now make rss feeds!',
+               guid=Guid('http://www.web2py.com/'),
+               pubDate=datetime.datetime(2007, 11, 14, 10, 30))])
+    return dumps(rss)
+
+
+if __name__ == '__main__':
+    print test()
+

ADDED   gluon/contrib/shell.py
Index: gluon/contrib/shell.py
==================================================================
--- /dev/null
+++ gluon/contrib/shell.py
@@ -0,0 +1,267 @@
+#!/usr/bin/python
+#
+# Copyright 2007 Google Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modified by Massimo Di Pierro so it works with and without GAE with web2py
+# the modified version of this file is still released under the original Apache license
+# and it is not released under the web2py license.
+#
+# This should be compatible with the Apache license since it states:
+# "For the purposes of this License, Derivative Works shall not include works
+#   that remain separable from, or merely link (or bind by name) to the interfaces of,
+#   the Work and Derivative Works thereof."
+#
+# In fact this file is Apache-licensed and it is separable from the rest of web2py.
+
+
+"""
+An interactive, stateful AJAX shell that runs Python code on the server.
+"""
+
+import logging
+import new
+import os
+import cPickle
+import sys
+import traceback
+import types
+import wsgiref.handlers
+import StringIO
+import threading
+locker = threading.RLock()
+
+# Set to True if stack traces should be shown in the browser, etc.
+_DEBUG = True
+
+# The entity kind for shell historys. Feel free to rename to suit your app.
+_HISTORY_KIND = '_Shell_History'
+
+# Types that can't be pickled.
+UNPICKLABLE_TYPES = (
+    types.ModuleType,
+    types.TypeType,
+    types.ClassType,
+    types.FunctionType,
+    )
+
+# Unpicklable statements to seed new historys with.
+INITIAL_UNPICKLABLES = [
+    'import logging',
+    'import os',
+    'import sys',
+    ]
+
+
+class History:
+    """A shell history. Stores the history's globals.
+
+    Each history globals is stored in one of two places:
+
+    If the global is picklable, it's stored in the parallel globals and
+    global_names list properties. (They're parallel lists to work around the
+    unfortunate fact that the datastore can't store dictionaries natively.)
+
+    If the global is not picklable (e.g. modules, classes, and functions), or if
+    it was created by the same statement that created an unpicklable global,
+    it's not stored directly. Instead, the statement is stored in the
+    unpicklables list property. On each request, before executing the current
+    statement, the unpicklable statements are evaluated to recreate the
+    unpicklable globals.
+
+    The unpicklable_names property stores all of the names of globals that were
+    added by unpicklable statements. When we pickle and store the globals after
+    executing a statement, we skip the ones in unpicklable_names.
+
+    Using Text instead of string is an optimization. We don't query on any of
+    these properties, so they don't need to be indexed.
+    """
+    global_names = []
+    globals = []
+    unpicklable_names = []
+    unpicklables = []
+
+    def set_global(self, name, value):
+        """Adds a global, or updates it if it already exists.
+
+        Also removes the global from the list of unpicklable names.
+
+        Args:
+            name: the name of the global to remove
+            value: any picklable value
+        """
+        blob = cPickle.dumps(value)
+
+        if name in self.global_names:
+            index = self.global_names.index(name)
+            self.globals[index] = blob
+        else:
+            self.global_names.append(name)
+            self.globals.append(blob)
+
+        self.remove_unpicklable_name(name)
+
+    def remove_global(self, name):
+        """Removes a global, if it exists.
+
+        Args:
+            name: string, the name of the global to remove
+        """
+        if name in self.global_names:
+            index = self.global_names.index(name)
+            del self.global_names[index]
+            del self.globals[index]
+
+    def globals_dict(self):
+        """Returns a dictionary view of the globals.
+        """
+        return dict((name, cPickle.loads(val))
+                    for name, val in zip(self.global_names, self.globals))
+
+    def add_unpicklable(self, statement, names):
+        """Adds a statement and list of names to the unpicklables.
+
+        Also removes the names from the globals.
+
+        Args:
+            statement: string, the statement that created new unpicklable global(s).
+            names: list of strings; the names of the globals created by the statement.
+        """
+        self.unpicklables.append(statement)
+
+        for name in names:
+            self.remove_global(name)
+            if name not in self.unpicklable_names:
+                self.unpicklable_names.append(name)
+
+    def remove_unpicklable_name(self, name):
+        """Removes a name from the list of unpicklable names, if it exists.
+
+        Args:
+            name: string, the name of the unpicklable global to remove
+        """
+        if name in self.unpicklable_names:
+            self.unpicklable_names.remove(name)
+
+def represent(obj):
+    """Returns a string representing the given object's value, which should allow the
+    code below to determine whether the object changes over time.
+    """
+    try:
+        return cPickle.dumps(obj)
+    except:
+        return repr(obj)
+
+def run(history, statement, env={}):
+    """
+    Evaluates a python statement in a given history and returns the result.
+    """
+    history.unpicklables = INITIAL_UNPICKLABLES
+
+    # extract the statement to be run
+    if not statement:
+        return ''
+
+    # the python compiler doesn't like network line endings
+    statement = statement.replace('\r\n', '\n')
+
+    # add a couple newlines at the end of the statement. this makes
+    # single-line expressions such as 'class Foo: pass' evaluate happily.
+    statement += '\n\n'
+
+
+    # log and compile the statement up front
+    try:
+        logging.info('Compiling and evaluating:\n%s' % statement)
+        compiled = compile(statement, '<string>', 'single')
+    except:
+        return str(traceback.format_exc())
+
+    # create a dedicated module to be used as this statement's __main__
+    statement_module = new.module('__main__')
+
+    # use this request's __builtin__, since it changes on each request.
+    # this is needed for import statements, among other things.
+    import __builtin__
+    statement_module.__builtins__ = __builtin__
+
+    # load the history from the datastore
+    history = History()
+
+    # swap in our custom module for __main__. then unpickle the history
+    # globals, run the statement, and re-pickle the history globals, all
+    # inside it.
+    old_main = sys.modules.get('__main__')
+    output = StringIO.StringIO()
+    try:
+        sys.modules['__main__'] = statement_module
+        statement_module.__name__ = '__main__'
+        statement_module.__dict__.update(env)
+
+        # re-evaluate the unpicklables
+        for code in history.unpicklables:
+            exec code in statement_module.__dict__
+
+        # re-initialize the globals
+        for name, val in history.globals_dict().items():
+            try:
+                statement_module.__dict__[name] = val
+            except:
+                msg = 'Dropping %s since it could not be unpickled.\n' % name
+                output.write(msg)
+                logging.warning(msg + traceback.format_exc())
+                history.remove_global(name)
+
+        # run!
+        old_globals = dict((key,represent(value)) for key,value in statement_module.__dict__.items())
+        try:
+            old_stdout, old_stderr = sys.stdout, sys.stderr
+            try:
+                sys.stderr = sys.stdout = output
+                locker.acquire()
+                exec compiled in statement_module.__dict__
+            finally:
+                locker.release()
+                sys.stdout, sys.stderr = old_stdout, old_stderr
+        except:
+            output.write(str(traceback.format_exc()))
+            return output.getvalue()
+
+        # extract the new globals that this statement added
+        new_globals = {}
+        for name, val in statement_module.__dict__.items():
+            if name not in old_globals or represent(val) != old_globals[name]:
+                new_globals[name] = val
+
+        if True in [isinstance(val, UNPICKLABLE_TYPES)
+                    for val in new_globals.values()]:
+            # this statement added an unpicklable global. store the statement and
+            # the names of all of the globals it added in the unpicklables.
+            history.add_unpicklable(statement, new_globals.keys())
+            logging.debug('Storing this statement as an unpicklable.')
+        else:
+            # this statement didn't add any unpicklables. pickle and store the
+            # new globals back into the datastore.
+            for name, val in new_globals.items():
+                if not name.startswith('__'):
+                    history.set_global(name, val)
+
+    finally:
+        sys.modules['__main__'] = old_main
+    return output.getvalue()
+
+if __name__=='__main__':
+    history=History()
+    while True: print run(history, raw_input('>>> ')).rstrip()
+

ADDED   gluon/contrib/simplejson/LICENSE.txt
Index: gluon/contrib/simplejson/LICENSE.txt
==================================================================
--- /dev/null
+++ gluon/contrib/simplejson/LICENSE.txt
@@ -0,0 +1,19 @@
+Copyright (c) 2006 Bob Ippolito
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of
+this software and associated documentation files (the "Software"), to deal in
+the Software without restriction, including without limitation the rights to
+use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
+of the Software, and to permit persons to whom the Software is furnished to do
+so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

ADDED   gluon/contrib/simplejson/__init__.py
Index: gluon/contrib/simplejson/__init__.py
==================================================================
--- /dev/null
+++ gluon/contrib/simplejson/__init__.py
@@ -0,0 +1,439 @@
+r"""JSON (JavaScript Object Notation) <http://json.org> is a subset of
+JavaScript syntax (ECMA-262 3rd edition) used as a lightweight data
+interchange format.
+
+:mod:`simplejson` exposes an API familiar to users of the standard library
+:mod:`marshal` and :mod:`pickle` modules. It is the externally maintained
+version of the :mod:`json` library contained in Python 2.6, but maintains
+compatibility with Python 2.4 and Python 2.5 and (currently) has
+significant performance advantages, even without using the optional C
+extension for speedups.
+
+Encoding basic Python object hierarchies::
+
+    >>> import simplejson as json
+    >>> json.dumps(['foo', {'bar': ('baz', None, 1.0, 2)}])
+    '["foo", {"bar": ["baz", null, 1.0, 2]}]'
+    >>> print json.dumps("\"foo\bar")
+    "\"foo\bar"
+    >>> print json.dumps(u'\u1234')
+    "\u1234"
+    >>> print json.dumps('\\')
+    "\\"
+    >>> print json.dumps({"c": 0, "b": 0, "a": 0}, sort_keys=True)
+    {"a": 0, "b": 0, "c": 0}
+    >>> from StringIO import StringIO
+    >>> io = StringIO()
+    >>> json.dump(['streaming API'], io)
+    >>> io.getvalue()
+    '["streaming API"]'
+
+Compact encoding::
+
+    >>> import simplejson as json
+    >>> json.dumps([1,2,3,{'4': 5, '6': 7}], separators=(',',':'))
+    '[1,2,3,{"4":5,"6":7}]'
+
+Pretty printing::
+
+    >>> import simplejson as json
+    >>> s = json.dumps({'4': 5, '6': 7}, sort_keys=True, indent='    ')
+    >>> print '\n'.join([l.rstrip() for l in  s.splitlines()])
+    {
+        "4": 5,
+        "6": 7
+    }
+
+Decoding JSON::
+
+    >>> import simplejson as json
+    >>> obj = [u'foo', {u'bar': [u'baz', None, 1.0, 2]}]
+    >>> json.loads('["foo", {"bar":["baz", null, 1.0, 2]}]') == obj
+    True
+    >>> json.loads('"\\"foo\\bar"') == u'"foo\x08ar'
+    True
+    >>> from StringIO import StringIO
+    >>> io = StringIO('["streaming API"]')
+    >>> json.load(io)[0] == 'streaming API'
+    True
+
+Specializing JSON object decoding::
+
+    >>> import simplejson as json
+    >>> def as_complex(dct):
+    ...     if '__complex__' in dct:
+    ...         return complex(dct['real'], dct['imag'])
+    ...     return dct
+    ...
+    >>> json.loads('{"__complex__": true, "real": 1, "imag": 2}',
+    ...     object_hook=as_complex)
+    (1+2j)
+    >>> from decimal import Decimal
+    >>> json.loads('1.1', parse_float=Decimal) == Decimal('1.1')
+    True
+
+Specializing JSON object encoding::
+
+    >>> import simplejson as json
+    >>> def encode_complex(obj):
+    ...     if isinstance(obj, complex):
+    ...         return [obj.real, obj.imag]
+    ...     raise TypeError(repr(o) + " is not JSON serializable")
+    ...
+    >>> json.dumps(2 + 1j, default=encode_complex)
+    '[2.0, 1.0]'
+    >>> json.JSONEncoder(default=encode_complex).encode(2 + 1j)
+    '[2.0, 1.0]'
+    >>> ''.join(json.JSONEncoder(default=encode_complex).iterencode(2 + 1j))
+    '[2.0, 1.0]'
+
+
+Using simplejson.tool from the shell to validate and pretty-print::
+
+    $ echo '{"json":"obj"}' | python -m simplejson.tool
+    {
+        "json": "obj"
+    }
+    $ echo '{ 1.2:3.4}' | python -m simplejson.tool
+    Expecting property name: line 1 column 2 (char 2)
+"""
+__version__ = '2.1.3'
+__all__ = [
+    'dump', 'dumps', 'load', 'loads',
+    'JSONDecoder', 'JSONDecodeError', 'JSONEncoder',
+    'OrderedDict',
+]
+
+__author__ = 'Bob Ippolito <bob@redivi.com>'
+
+from decimal import Decimal
+
+from decoder import JSONDecoder, JSONDecodeError
+from encoder import JSONEncoder
+def _import_OrderedDict():
+    import collections
+    try:
+        return collections.OrderedDict
+    except AttributeError:
+        import ordered_dict
+        return ordered_dict.OrderedDict
+OrderedDict = _import_OrderedDict()
+
+def _import_c_make_encoder():
+    try:
+        raise ImportError # because assumes simplejson in path
+        from simplejson._speedups import make_encoder
+        return make_encoder
+    except ImportError:
+        return None
+
+_default_encoder = JSONEncoder(
+    skipkeys=False,
+    ensure_ascii=True,
+    check_circular=True,
+    allow_nan=True,
+    indent=None,
+    separators=None,
+    encoding='utf-8',
+    default=None,
+    use_decimal=False,
+)
+
+def dump(obj, fp, skipkeys=False, ensure_ascii=True, check_circular=True,
+        allow_nan=True, cls=None, indent=None, separators=None,
+        encoding='utf-8', default=None, use_decimal=False, **kw):
+    """Serialize ``obj`` as a JSON formatted stream to ``fp`` (a
+    ``.write()``-supporting file-like object).
+
+    If ``skipkeys`` is true then ``dict`` keys that are not basic types
+    (``str``, ``unicode``, ``int``, ``long``, ``float``, ``bool``, ``None``)
+    will be skipped instead of raising a ``TypeError``.
+
+    If ``ensure_ascii`` is false, then the some chunks written to ``fp``
+    may be ``unicode`` instances, subject to normal Python ``str`` to
+    ``unicode`` coercion rules. Unless ``fp.write()`` explicitly
+    understands ``unicode`` (as in ``codecs.getwriter()``) this is likely
+    to cause an error.
+
+    If ``check_circular`` is false, then the circular reference check
+    for container types will be skipped and a circular reference will
+    result in an ``OverflowError`` (or worse).
+
+    If ``allow_nan`` is false, then it will be a ``ValueError`` to
+    serialize out of range ``float`` values (``nan``, ``inf``, ``-inf``)
+    in strict compliance of the JSON specification, instead of using the
+    JavaScript equivalents (``NaN``, ``Infinity``, ``-Infinity``).
+
+    If *indent* is a string, then JSON array elements and object members
+    will be pretty-printed with a newline followed by that string repeated
+    for each level of nesting. ``None`` (the default) selects the most compact
+    representation without any newlines. For backwards compatibility with
+    versions of simplejson earlier than 2.1.0, an integer is also accepted
+    and is converted to a string with that many spaces.
+
+    If ``separators`` is an ``(item_separator, dict_separator)`` tuple
+    then it will be used instead of the default ``(', ', ': ')`` separators.
+    ``(',', ':')`` is the most compact JSON representation.
+
+    ``encoding`` is the character encoding for str instances, default is UTF-8.
+
+    ``default(obj)`` is a function that should return a serializable version
+    of obj or raise TypeError. The default simply raises TypeError.
+
+    If *use_decimal* is true (default: ``False``) then decimal.Decimal
+    will be natively serialized to JSON with full precision.
+
+    To use a custom ``JSONEncoder`` subclass (e.g. one that overrides the
+    ``.default()`` method to serialize additional types), specify it with
+    the ``cls`` kwarg.
+
+    """
+    # cached encoder
+    if (not skipkeys and ensure_ascii and
+        check_circular and allow_nan and
+        cls is None and indent is None and separators is None and
+        encoding == 'utf-8' and default is None and not use_decimal
+        and not kw):
+        iterable = _default_encoder.iterencode(obj)
+    else:
+        if cls is None:
+            cls = JSONEncoder
+        iterable = cls(skipkeys=skipkeys, ensure_ascii=ensure_ascii,
+            check_circular=check_circular, allow_nan=allow_nan, indent=indent,
+            separators=separators, encoding=encoding,
+            default=default, use_decimal=use_decimal, **kw).iterencode(obj)
+    # could accelerate with writelines in some versions of Python, at
+    # a debuggability cost
+    for chunk in iterable:
+        fp.write(chunk)
+
+
+def dumps(obj, skipkeys=False, ensure_ascii=True, check_circular=True,
+        allow_nan=True, cls=None, indent=None, separators=None,
+        encoding='utf-8', default=None, use_decimal=False, **kw):
+    """Serialize ``obj`` to a JSON formatted ``str``.
+
+    If ``skipkeys`` is false then ``dict`` keys that are not basic types
+    (``str``, ``unicode``, ``int``, ``long``, ``float``, ``bool``, ``None``)
+    will be skipped instead of raising a ``TypeError``.
+
+    If ``ensure_ascii`` is false, then the return value will be a
+    ``unicode`` instance subject to normal Python ``str`` to ``unicode``
+    coercion rules instead of being escaped to an ASCII ``str``.
+
+    If ``check_circular`` is false, then the circular reference check
+    for container types will be skipped and a circular reference will
+    result in an ``OverflowError`` (or worse).
+
+    If ``allow_nan`` is false, then it will be a ``ValueError`` to
+    serialize out of range ``float`` values (``nan``, ``inf``, ``-inf``) in
+    strict compliance of the JSON specification, instead of using the
+    JavaScript equivalents (``NaN``, ``Infinity``, ``-Infinity``).
+
+    If ``indent`` is a string, then JSON array elements and object members
+    will be pretty-printed with a newline followed by that string repeated
+    for each level of nesting. ``None`` (the default) selects the most compact
+    representation without any newlines. For backwards compatibility with
+    versions of simplejson earlier than 2.1.0, an integer is also accepted
+    and is converted to a string with that many spaces.
+
+    If ``separators`` is an ``(item_separator, dict_separator)`` tuple
+    then it will be used instead of the default ``(', ', ': ')`` separators.
+    ``(',', ':')`` is the most compact JSON representation.
+
+    ``encoding`` is the character encoding for str instances, default is UTF-8.
+
+    ``default(obj)`` is a function that should return a serializable version
+    of obj or raise TypeError. The default simply raises TypeError.
+
+    If *use_decimal* is true (default: ``False``) then decimal.Decimal
+    will be natively serialized to JSON with full precision.
+
+    To use a custom ``JSONEncoder`` subclass (e.g. one that overrides the
+    ``.default()`` method to serialize additional types), specify it with
+    the ``cls`` kwarg.
+
+    """
+    # cached encoder
+    if (not skipkeys and ensure_ascii and
+        check_circular and allow_nan and
+        cls is None and indent is None and separators is None and
+        encoding == 'utf-8' and default is None and not use_decimal
+        and not kw):
+        return _default_encoder.encode(obj)
+    if cls is None:
+        cls = JSONEncoder
+    return cls(
+        skipkeys=skipkeys, ensure_ascii=ensure_ascii,
+        check_circular=check_circular, allow_nan=allow_nan, indent=indent,
+        separators=separators, encoding=encoding, default=default,
+        use_decimal=use_decimal, **kw).encode(obj)
+
+
+_default_decoder = JSONDecoder(encoding=None, object_hook=None,
+                               object_pairs_hook=None)
+
+
+def load(fp, encoding=None, cls=None, object_hook=None, parse_float=None,
+        parse_int=None, parse_constant=None, object_pairs_hook=None,
+        use_decimal=False, **kw):
+    """Deserialize ``fp`` (a ``.read()``-supporting file-like object containing
+    a JSON document) to a Python object.
+
+    *encoding* determines the encoding used to interpret any
+    :class:`str` objects decoded by this instance (``'utf-8'`` by
+    default).  It has no effect when decoding :class:`unicode` objects.
+
+    Note that currently only encodings that are a superset of ASCII work,
+    strings of other encodings should be passed in as :class:`unicode`.
+
+    *object_hook*, if specified, will be called with the result of every
+    JSON object decoded and its return value will be used in place of the
+    given :class:`dict`.  This can be used to provide custom
+    deserializations (e.g. to support JSON-RPC class hinting).
+
+    *object_pairs_hook* is an optional function that will be called with
+    the result of any object literal decode with an ordered list of pairs.
+    The return value of *object_pairs_hook* will be used instead of the
+    :class:`dict`.  This feature can be used to implement custom decoders
+    that rely on the order that the key and value pairs are decoded (for
+    example, :func:`collections.OrderedDict` will remember the order of
+    insertion). If *object_hook* is also defined, the *object_pairs_hook*
+    takes priority.
+
+    *parse_float*, if specified, will be called with the string of every
+    JSON float to be decoded.  By default, this is equivalent to
+    ``float(num_str)``. This can be used to use another datatype or parser
+    for JSON floats (e.g. :class:`decimal.Decimal`).
+
+    *parse_int*, if specified, will be called with the string of every
+    JSON int to be decoded.  By default, this is equivalent to
+    ``int(num_str)``.  This can be used to use another datatype or parser
+    for JSON integers (e.g. :class:`float`).
+
+    *parse_constant*, if specified, will be called with one of the
+    following strings: ``'-Infinity'``, ``'Infinity'``, ``'NaN'``.  This
+    can be used to raise an exception if invalid JSON numbers are
+    encountered.
+
+    If *use_decimal* is true (default: ``False``) then it implies
+    parse_float=decimal.Decimal for parity with ``dump``.
+
+    To use a custom ``JSONDecoder`` subclass, specify it with the ``cls``
+    kwarg.
+
+    """
+    return loads(fp.read(),
+        encoding=encoding, cls=cls, object_hook=object_hook,
+        parse_float=parse_float, parse_int=parse_int,
+        parse_constant=parse_constant, object_pairs_hook=object_pairs_hook,
+        use_decimal=use_decimal, **kw)
+
+
+def loads(s, encoding=None, cls=None, object_hook=None, parse_float=None,
+        parse_int=None, parse_constant=None, object_pairs_hook=None,
+        use_decimal=False, **kw):
+    """Deserialize ``s`` (a ``str`` or ``unicode`` instance containing a JSON
+    document) to a Python object.
+
+    *encoding* determines the encoding used to interpret any
+    :class:`str` objects decoded by this instance (``'utf-8'`` by
+    default).  It has no effect when decoding :class:`unicode` objects.
+
+    Note that currently only encodings that are a superset of ASCII work,
+    strings of other encodings should be passed in as :class:`unicode`.
+
+    *object_hook*, if specified, will be called with the result of every
+    JSON object decoded and its return value will be used in place of the
+    given :class:`dict`.  This can be used to provide custom
+    deserializations (e.g. to support JSON-RPC class hinting).
+
+    *object_pairs_hook* is an optional function that will be called with
+    the result of any object literal decode with an ordered list of pairs.
+    The return value of *object_pairs_hook* will be used instead of the
+    :class:`dict`.  This feature can be used to implement custom decoders
+    that rely on the order that the key and value pairs are decoded (for
+    example, :func:`collections.OrderedDict` will remember the order of
+    insertion). If *object_hook* is also defined, the *object_pairs_hook*
+    takes priority.
+
+    *parse_float*, if specified, will be called with the string of every
+    JSON float to be decoded.  By default, this is equivalent to
+    ``float(num_str)``. This can be used to use another datatype or parser
+    for JSON floats (e.g. :class:`decimal.Decimal`).
+
+    *parse_int*, if specified, will be called with the string of every
+    JSON int to be decoded.  By default, this is equivalent to
+    ``int(num_str)``.  This can be used to use another datatype or parser
+    for JSON integers (e.g. :class:`float`).
+
+    *parse_constant*, if specified, will be called with one of the
+    following strings: ``'-Infinity'``, ``'Infinity'``, ``'NaN'``.  This
+    can be used to raise an exception if invalid JSON numbers are
+    encountered.
+
+    If *use_decimal* is true (default: ``False``) then it implies
+    parse_float=decimal.Decimal for parity with ``dump``.
+
+    To use a custom ``JSONDecoder`` subclass, specify it with the ``cls``
+    kwarg.
+
+    """
+    if (cls is None and encoding is None and object_hook is None and
+            parse_int is None and parse_float is None and
+            parse_constant is None and object_pairs_hook is None
+            and not use_decimal and not kw):
+        return _default_decoder.decode(s)
+    if cls is None:
+        cls = JSONDecoder
+    if object_hook is not None:
+        kw['object_hook'] = object_hook
+    if object_pairs_hook is not None:
+        kw['object_pairs_hook'] = object_pairs_hook
+    if parse_float is not None:
+        kw['parse_float'] = parse_float
+    if parse_int is not None:
+        kw['parse_int'] = parse_int
+    if parse_constant is not None:
+        kw['parse_constant'] = parse_constant
+    if use_decimal:
+        if parse_float is not None:
+            raise TypeError("use_decimal=True implies parse_float=Decimal")
+        kw['parse_float'] = Decimal
+    return cls(encoding=encoding, **kw).decode(s)
+
+
+def _toggle_speedups(enabled):
+    import decoder as dec
+    import encoder as enc
+    import scanner as scan
+    c_make_encoder = _import_c_make_encoder()
+    if enabled:
+        dec.scanstring = dec.c_scanstring or dec.py_scanstring
+        enc.c_make_encoder = c_make_encoder
+        enc.encode_basestring_ascii = (enc.c_encode_basestring_ascii or 
+            enc.py_encode_basestring_ascii)
+        scan.make_scanner = scan.c_make_scanner or scan.py_make_scanner
+    else:
+        dec.scanstring = dec.py_scanstring
+        enc.c_make_encoder = None
+        enc.encode_basestring_ascii = enc.py_encode_basestring_ascii
+        scan.make_scanner = scan.py_make_scanner
+    dec.make_scanner = scan.make_scanner
+    global _default_decoder
+    _default_decoder = JSONDecoder(
+        encoding=None,
+        object_hook=None,
+        object_pairs_hook=None,
+    )
+    global _default_encoder
+    _default_encoder = JSONEncoder(
+       skipkeys=False,
+       ensure_ascii=True,
+       check_circular=True,
+       allow_nan=True,
+       indent=None,
+       separators=None,
+       encoding='utf-8',
+       default=None,
+   )

ADDED   gluon/contrib/simplejson/decoder.py
Index: gluon/contrib/simplejson/decoder.py
==================================================================
--- /dev/null
+++ gluon/contrib/simplejson/decoder.py
@@ -0,0 +1,422 @@
+"""Implementation of JSONDecoder
+"""
+import re
+import sys
+import struct
+
+from scanner import make_scanner
+def _import_c_scanstring():
+    try:
+        raise ImportError # because assumes simplejson in path
+        from simplejson._speedups import scanstring
+        return scanstring
+    except ImportError:
+        return None
+c_scanstring = _import_c_scanstring()
+
+__all__ = ['JSONDecoder']
+
+FLAGS = re.VERBOSE | re.MULTILINE | re.DOTALL
+
+def _floatconstants():
+    _BYTES = '7FF80000000000007FF0000000000000'.decode('hex')
+    # The struct module in Python 2.4 would get frexp() out of range here
+    # when an endian is specified in the format string. Fixed in Python 2.5+
+    if sys.byteorder != 'big':
+        _BYTES = _BYTES[:8][::-1] + _BYTES[8:][::-1]
+    nan, inf = struct.unpack('dd', _BYTES)
+    return nan, inf, -inf
+
+NaN, PosInf, NegInf = _floatconstants()
+
+
+class JSONDecodeError(ValueError):
+    """Subclass of ValueError with the following additional properties:
+
+    msg: The unformatted error message
+    doc: The JSON document being parsed
+    pos: The start index of doc where parsing failed
+    end: The end index of doc where parsing failed (may be None)
+    lineno: The line corresponding to pos
+    colno: The column corresponding to pos
+    endlineno: The line corresponding to end (may be None)
+    endcolno: The column corresponding to end (may be None)
+
+    """
+    def __init__(self, msg, doc, pos, end=None):
+        ValueError.__init__(self, errmsg(msg, doc, pos, end=end))
+        self.msg = msg
+        self.doc = doc
+        self.pos = pos
+        self.end = end
+        self.lineno, self.colno = linecol(doc, pos)
+        if end is not None:
+            self.endlineno, self.endcolno = linecol(doc, end)
+        else:
+            self.endlineno, self.endcolno = None, None
+
+
+def linecol(doc, pos):
+    lineno = doc.count('\n', 0, pos) + 1
+    if lineno == 1:
+        colno = pos
+    else:
+        colno = pos - doc.rindex('\n', 0, pos)
+    return lineno, colno
+
+
+def errmsg(msg, doc, pos, end=None):
+    # Note that this function is called from _speedups
+    lineno, colno = linecol(doc, pos)
+    if end is None:
+        #fmt = '{0}: line {1} column {2} (char {3})'
+        #return fmt.format(msg, lineno, colno, pos)
+        fmt = '%s: line %d column %d (char %d)'
+        return fmt % (msg, lineno, colno, pos)
+    endlineno, endcolno = linecol(doc, end)
+    #fmt = '{0}: line {1} column {2} - line {3} column {4} (char {5} - {6})'
+    #return fmt.format(msg, lineno, colno, endlineno, endcolno, pos, end)
+    fmt = '%s: line %d column %d - line %d column %d (char %d - %d)'
+    return fmt % (msg, lineno, colno, endlineno, endcolno, pos, end)
+
+
+_CONSTANTS = {
+    '-Infinity': NegInf,
+    'Infinity': PosInf,
+    'NaN': NaN,
+}
+
+STRINGCHUNK = re.compile(r'(.*?)(["\\\x00-\x1f])', FLAGS)
+BACKSLASH = {
+    '"': u'"', '\\': u'\\', '/': u'/',
+    'b': u'\b', 'f': u'\f', 'n': u'\n', 'r': u'\r', 't': u'\t',
+}
+
+DEFAULT_ENCODING = "utf-8"
+
+def py_scanstring(s, end, encoding=None, strict=True,
+        _b=BACKSLASH, _m=STRINGCHUNK.match):
+    """Scan the string s for a JSON string. End is the index of the
+    character in s after the quote that started the JSON string.
+    Unescapes all valid JSON string escape sequences and raises ValueError
+    on attempt to decode an invalid string. If strict is False then literal
+    control characters are allowed in the string.
+
+    Returns a tuple of the decoded string and the index of the character in s
+    after the end quote."""
+    if encoding is None:
+        encoding = DEFAULT_ENCODING
+    chunks = []
+    _append = chunks.append
+    begin = end - 1
+    while 1:
+        chunk = _m(s, end)
+        if chunk is None:
+            raise JSONDecodeError(
+                "Unterminated string starting at", s, begin)
+        end = chunk.end()
+        content, terminator = chunk.groups()
+        # Content is contains zero or more unescaped string characters
+        if content:
+            if not isinstance(content, unicode):
+                content = unicode(content, encoding)
+            _append(content)
+        # Terminator is the end of string, a literal control character,
+        # or a backslash denoting that an escape sequence follows
+        if terminator == '"':
+            break
+        elif terminator != '\\':
+            if strict:
+                msg = "Invalid control character %r at" % (terminator,)
+                #msg = "Invalid control character {0!r} at".format(terminator)
+                raise JSONDecodeError(msg, s, end)
+            else:
+                _append(terminator)
+                continue
+        try:
+            esc = s[end]
+        except IndexError:
+            raise JSONDecodeError(
+                "Unterminated string starting at", s, begin)
+        # If not a unicode escape sequence, must be in the lookup table
+        if esc != 'u':
+            try:
+                char = _b[esc]
+            except KeyError:
+                msg = "Invalid \\escape: " + repr(esc)
+                raise JSONDecodeError(msg, s, end)
+            end += 1
+        else:
+            # Unicode escape sequence
+            esc = s[end + 1:end + 5]
+            next_end = end + 5
+            if len(esc) != 4:
+                msg = "Invalid \\uXXXX escape"
+                raise JSONDecodeError(msg, s, end)
+            uni = int(esc, 16)
+            # Check for surrogate pair on UCS-4 systems
+            if 0xd800 <= uni <= 0xdbff and sys.maxunicode > 65535:
+                msg = "Invalid \\uXXXX\\uXXXX surrogate pair"
+                if not s[end + 5:end + 7] == '\\u':
+                    raise JSONDecodeError(msg, s, end)
+                esc2 = s[end + 7:end + 11]
+                if len(esc2) != 4:
+                    raise JSONDecodeError(msg, s, end)
+                uni2 = int(esc2, 16)
+                uni = 0x10000 + (((uni - 0xd800) << 10) | (uni2 - 0xdc00))
+                next_end += 6
+            char = unichr(uni)
+            end = next_end
+        # Append the unescaped character
+        _append(char)
+    return u''.join(chunks), end
+
+
+# Use speedup if available
+scanstring = c_scanstring or py_scanstring
+
+WHITESPACE = re.compile(r'[ \t\n\r]*', FLAGS)
+WHITESPACE_STR = ' \t\n\r'
+
+def JSONObject((s, end), encoding, strict, scan_once, object_hook,
+        object_pairs_hook, memo=None,
+        _w=WHITESPACE.match, _ws=WHITESPACE_STR):
+    # Backwards compatibility
+    if memo is None:
+        memo = {}
+    memo_get = memo.setdefault
+    pairs = []
+    # Use a slice to prevent IndexError from being raised, the following
+    # check will raise a more specific ValueError if the string is empty
+    nextchar = s[end:end + 1]
+    # Normally we expect nextchar == '"'
+    if nextchar != '"':
+        if nextchar in _ws:
+            end = _w(s, end).end()
+            nextchar = s[end:end + 1]
+        # Trivial empty object
+        if nextchar == '}':
+            if object_pairs_hook is not None:
+                result = object_pairs_hook(pairs)
+                return result, end + 1
+            pairs = {}
+            if object_hook is not None:
+                pairs = object_hook(pairs)
+            return pairs, end + 1
+        elif nextchar != '"':
+            raise JSONDecodeError("Expecting property name", s, end)
+    end += 1
+    while True:
+        key, end = scanstring(s, end, encoding, strict)
+        key = memo_get(key, key)
+
+        # To skip some function call overhead we optimize the fast paths where
+        # the JSON key separator is ": " or just ":".
+        if s[end:end + 1] != ':':
+            end = _w(s, end).end()
+            if s[end:end + 1] != ':':
+                raise JSONDecodeError("Expecting : delimiter", s, end)
+
+        end += 1
+
+        try:
+            if s[end] in _ws:
+                end += 1
+                if s[end] in _ws:
+                    end = _w(s, end + 1).end()
+        except IndexError:
+            pass
+
+        try:
+            value, end = scan_once(s, end)
+        except StopIteration:
+            raise JSONDecodeError("Expecting object", s, end)
+        pairs.append((key, value))
+
+        try:
+            nextchar = s[end]
+            if nextchar in _ws:
+                end = _w(s, end + 1).end()
+                nextchar = s[end]
+        except IndexError:
+            nextchar = ''
+        end += 1
+
+        if nextchar == '}':
+            break
+        elif nextchar != ',':
+            raise JSONDecodeError("Expecting , delimiter", s, end - 1)
+
+        try:
+            nextchar = s[end]
+            if nextchar in _ws:
+                end += 1
+                nextchar = s[end]
+                if nextchar in _ws:
+                    end = _w(s, end + 1).end()
+                    nextchar = s[end]
+        except IndexError:
+            nextchar = ''
+
+        end += 1
+        if nextchar != '"':
+            raise JSONDecodeError("Expecting property name", s, end - 1)
+
+    if object_pairs_hook is not None:
+        result = object_pairs_hook(pairs)
+        return result, end
+    pairs = dict(pairs)
+    if object_hook is not None:
+        pairs = object_hook(pairs)
+    return pairs, end
+
+def JSONArray((s, end), scan_once, _w=WHITESPACE.match, _ws=WHITESPACE_STR):
+    values = []
+    nextchar = s[end:end + 1]
+    if nextchar in _ws:
+        end = _w(s, end + 1).end()
+        nextchar = s[end:end + 1]
+    # Look-ahead for trivial empty array
+    if nextchar == ']':
+        return values, end + 1
+    _append = values.append
+    while True:
+        try:
+            value, end = scan_once(s, end)
+        except StopIteration:
+            raise JSONDecodeError("Expecting object", s, end)
+        _append(value)
+        nextchar = s[end:end + 1]
+        if nextchar in _ws:
+            end = _w(s, end + 1).end()
+            nextchar = s[end:end + 1]
+        end += 1
+        if nextchar == ']':
+            break
+        elif nextchar != ',':
+            raise JSONDecodeError("Expecting , delimiter", s, end)
+
+        try:
+            if s[end] in _ws:
+                end += 1
+                if s[end] in _ws:
+                    end = _w(s, end + 1).end()
+        except IndexError:
+            pass
+
+    return values, end
+
+class JSONDecoder(object):
+    """Simple JSON <http://json.org> decoder
+
+    Performs the following translations in decoding by default:
+
+    +---------------+-------------------+
+    | JSON          | Python            |
+    +===============+===================+
+    | object        | dict              |
+    +---------------+-------------------+
+    | array         | list              |
+    +---------------+-------------------+
+    | string        | unicode           |
+    +---------------+-------------------+
+    | number (int)  | int, long         |
+    +---------------+-------------------+
+    | number (real) | float             |
+    +---------------+-------------------+
+    | true          | True              |
+    +---------------+-------------------+
+    | false         | False             |
+    +---------------+-------------------+
+    | null          | None              |
+    +---------------+-------------------+
+
+    It also understands ``NaN``, ``Infinity``, and ``-Infinity`` as
+    their corresponding ``float`` values, which is outside the JSON spec.
+
+    """
+
+    def __init__(self, encoding=None, object_hook=None, parse_float=None,
+            parse_int=None, parse_constant=None, strict=True,
+            object_pairs_hook=None):
+        """
+        *encoding* determines the encoding used to interpret any
+        :class:`str` objects decoded by this instance (``'utf-8'`` by
+        default).  It has no effect when decoding :class:`unicode` objects.
+
+        Note that currently only encodings that are a superset of ASCII work,
+        strings of other encodings should be passed in as :class:`unicode`.
+
+        *object_hook*, if specified, will be called with the result of every
+        JSON object decoded and its return value will be used in place of the
+        given :class:`dict`.  This can be used to provide custom
+        deserializations (e.g. to support JSON-RPC class hinting).
+
+        *object_pairs_hook* is an optional function that will be called with
+        the result of any object literal decode with an ordered list of pairs.
+        The return value of *object_pairs_hook* will be used instead of the
+        :class:`dict`.  This feature can be used to implement custom decoders
+        that rely on the order that the key and value pairs are decoded (for
+        example, :func:`collections.OrderedDict` will remember the order of
+        insertion). If *object_hook* is also defined, the *object_pairs_hook*
+        takes priority.
+
+        *parse_float*, if specified, will be called with the string of every
+        JSON float to be decoded.  By default, this is equivalent to
+        ``float(num_str)``. This can be used to use another datatype or parser
+        for JSON floats (e.g. :class:`decimal.Decimal`).
+
+        *parse_int*, if specified, will be called with the string of every
+        JSON int to be decoded.  By default, this is equivalent to
+        ``int(num_str)``.  This can be used to use another datatype or parser
+        for JSON integers (e.g. :class:`float`).
+
+        *parse_constant*, if specified, will be called with one of the
+        following strings: ``'-Infinity'``, ``'Infinity'``, ``'NaN'``.  This
+        can be used to raise an exception if invalid JSON numbers are
+        encountered.
+
+        *strict* controls the parser's behavior when it encounters an
+        invalid control character in a string. The default setting of
+        ``True`` means that unescaped control characters are parse errors, if
+        ``False`` then control characters will be allowed in strings.
+
+        """
+        self.encoding = encoding
+        self.object_hook = object_hook
+        self.object_pairs_hook = object_pairs_hook
+        self.parse_float = parse_float or float
+        self.parse_int = parse_int or int
+        self.parse_constant = parse_constant or _CONSTANTS.__getitem__
+        self.strict = strict
+        self.parse_object = JSONObject
+        self.parse_array = JSONArray
+        self.parse_string = scanstring
+        self.memo = {}
+        self.scan_once = make_scanner(self)
+
+    def decode(self, s, _w=WHITESPACE.match):
+        """Return the Python representation of ``s`` (a ``str`` or ``unicode``
+        instance containing a JSON document)
+
+        """
+        obj, end = self.raw_decode(s, idx=_w(s, 0).end())
+        end = _w(s, end).end()
+        if end != len(s):
+            raise JSONDecodeError("Extra data", s, end, len(s))
+        return obj
+
+    def raw_decode(self, s, idx=0):
+        """Decode a JSON document from ``s`` (a ``str`` or ``unicode``
+        beginning with a JSON document) and return a 2-tuple of the Python
+        representation and the index in ``s`` where the document ended.
+
+        This can be used to decode a JSON document from a string that may
+        have extraneous data at the end.
+
+        """
+        try:
+            obj, end = self.scan_once(s, idx)
+        except StopIteration:
+            raise JSONDecodeError("No JSON object could be decoded", s, idx)
+        return obj, end

ADDED   gluon/contrib/simplejson/encoder.py
Index: gluon/contrib/simplejson/encoder.py
==================================================================
--- /dev/null
+++ gluon/contrib/simplejson/encoder.py
@@ -0,0 +1,502 @@
+"""Implementation of JSONEncoder
+"""
+import re
+from decimal import Decimal
+
+def _import_speedups():
+    try:
+        raise ImportError # because assumes simplejson in path
+        from simplejson import _speedups
+        return _speedups.encode_basestring_ascii, _speedups.make_encoder
+    except ImportError:
+        return None, None
+c_encode_basestring_ascii, c_make_encoder = _import_speedups()
+
+from decoder import PosInf
+
+ESCAPE = re.compile(r'[\x00-\x1f\\"\b\f\n\r\t]')
+ESCAPE_ASCII = re.compile(r'([\\"]|[^\ -~])')
+HAS_UTF8 = re.compile(r'[\x80-\xff]')
+ESCAPE_DCT = {
+    '\\': '\\\\',
+    '"': '\\"',
+    '\b': '\\b',
+    '\f': '\\f',
+    '\n': '\\n',
+    '\r': '\\r',
+    '\t': '\\t',
+}
+for i in range(0x20):
+    #ESCAPE_DCT.setdefault(chr(i), '\\u{0:04x}'.format(i))
+    ESCAPE_DCT.setdefault(chr(i), '\\u%04x' % (i,))
+
+FLOAT_REPR = repr
+
+def encode_basestring(s):
+    """Return a JSON representation of a Python string
+
+    """
+    if isinstance(s, str) and HAS_UTF8.search(s) is not None:
+        s = s.decode('utf-8')
+    def replace(match):
+        return ESCAPE_DCT[match.group(0)]
+    return u'"' + ESCAPE.sub(replace, s) + u'"'
+
+
+def py_encode_basestring_ascii(s):
+    """Return an ASCII-only JSON representation of a Python string
+
+    """
+    if isinstance(s, str) and HAS_UTF8.search(s) is not None:
+        s = s.decode('utf-8')
+    def replace(match):
+        s = match.group(0)
+        try:
+            return ESCAPE_DCT[s]
+        except KeyError:
+            n = ord(s)
+            if n < 0x10000:
+                #return '\\u{0:04x}'.format(n)
+                return '\\u%04x' % (n,)
+            else:
+                # surrogate pair
+                n -= 0x10000
+                s1 = 0xd800 | ((n >> 10) & 0x3ff)
+                s2 = 0xdc00 | (n & 0x3ff)
+                #return '\\u{0:04x}\\u{1:04x}'.format(s1, s2)
+                return '\\u%04x\\u%04x' % (s1, s2)
+    return '"' + str(ESCAPE_ASCII.sub(replace, s)) + '"'
+
+
+encode_basestring_ascii = (
+    c_encode_basestring_ascii or py_encode_basestring_ascii)
+
+class JSONEncoder(object):
+    """Extensible JSON <http://json.org> encoder for Python data structures.
+
+    Supports the following objects and types by default:
+
+    +-------------------+---------------+
+    | Python            | JSON          |
+    +===================+===============+
+    | dict              | object        |
+    +-------------------+---------------+
+    | list, tuple       | array         |
+    +-------------------+---------------+
+    | str, unicode      | string        |
+    +-------------------+---------------+
+    | int, long, float  | number        |
+    +-------------------+---------------+
+    | True              | true          |
+    +-------------------+---------------+
+    | False             | false         |
+    +-------------------+---------------+
+    | None              | null          |
+    +-------------------+---------------+
+
+    To extend this to recognize other objects, subclass and implement a
+    ``.default()`` method with another method that returns a serializable
+    object for ``o`` if possible, otherwise it should call the superclass
+    implementation (to raise ``TypeError``).
+
+    """
+    item_separator = ', '
+    key_separator = ': '
+    def __init__(self, skipkeys=False, ensure_ascii=True,
+            check_circular=True, allow_nan=True, sort_keys=False,
+            indent=None, separators=None, encoding='utf-8', default=None,
+            use_decimal=False):
+        """Constructor for JSONEncoder, with sensible defaults.
+
+        If skipkeys is false, then it is a TypeError to attempt
+        encoding of keys that are not str, int, long, float or None.  If
+        skipkeys is True, such items are simply skipped.
+
+        If ensure_ascii is true, the output is guaranteed to be str
+        objects with all incoming unicode characters escaped.  If
+        ensure_ascii is false, the output will be unicode object.
+
+        If check_circular is true, then lists, dicts, and custom encoded
+        objects will be checked for circular references during encoding to
+        prevent an infinite recursion (which would cause an OverflowError).
+        Otherwise, no such check takes place.
+
+        If allow_nan is true, then NaN, Infinity, and -Infinity will be
+        encoded as such.  This behavior is not JSON specification compliant,
+        but is consistent with most JavaScript based encoders and decoders.
+        Otherwise, it will be a ValueError to encode such floats.
+
+        If sort_keys is true, then the output of dictionaries will be
+        sorted by key; this is useful for regression tests to ensure
+        that JSON serializations can be compared on a day-to-day basis.
+
+        If indent is a string, then JSON array elements and object members
+        will be pretty-printed with a newline followed by that string repeated
+        for each level of nesting. ``None`` (the default) selects the most compact
+        representation without any newlines. For backwards compatibility with
+        versions of simplejson earlier than 2.1.0, an integer is also accepted
+        and is converted to a string with that many spaces.
+
+        If specified, separators should be a (item_separator, key_separator)
+        tuple.  The default is (', ', ': ').  To get the most compact JSON
+        representation you should specify (',', ':') to eliminate whitespace.
+
+        If specified, default is a function that gets called for objects
+        that can't otherwise be serialized.  It should return a JSON encodable
+        version of the object or raise a ``TypeError``.
+
+        If encoding is not None, then all input strings will be
+        transformed into unicode using that encoding prior to JSON-encoding.
+        The default is UTF-8.
+
+        If use_decimal is true (not the default), ``decimal.Decimal`` will
+        be supported directly by the encoder. For the inverse, decode JSON
+        with ``parse_float=decimal.Decimal``.
+
+        """
+
+        self.skipkeys = skipkeys
+        self.ensure_ascii = ensure_ascii
+        self.check_circular = check_circular
+        self.allow_nan = allow_nan
+        self.sort_keys = sort_keys
+        self.use_decimal = use_decimal
+        if isinstance(indent, (int, long)):
+            indent = ' ' * indent
+        self.indent = indent
+        if separators is not None:
+            self.item_separator, self.key_separator = separators
+        if default is not None:
+            self.default = default
+        self.encoding = encoding
+
+    def default(self, o):
+        """Implement this method in a subclass such that it returns
+        a serializable object for ``o``, or calls the base implementation
+        (to raise a ``TypeError``).
+
+        For example, to support arbitrary iterators, you could
+        implement default like this::
+
+            def default(self, o):
+                try:
+                    iterable = iter(o)
+                except TypeError:
+                    pass
+                else:
+                    return list(iterable)
+                return JSONEncoder.default(self, o)
+
+        """
+        raise TypeError(repr(o) + " is not JSON serializable")
+
+    def encode(self, o):
+        """Return a JSON string representation of a Python data structure.
+
+        >>> from simplejson import JSONEncoder
+        >>> JSONEncoder().encode({"foo": ["bar", "baz"]})
+        '{"foo": ["bar", "baz"]}'
+
+        """
+        # This is for extremely simple cases and benchmarks.
+        if isinstance(o, basestring):
+            if isinstance(o, str):
+                _encoding = self.encoding
+                if (_encoding is not None
+                        and not (_encoding == 'utf-8')):
+                    o = o.decode(_encoding)
+            if self.ensure_ascii:
+                return encode_basestring_ascii(o)
+            else:
+                return encode_basestring(o)
+        # This doesn't pass the iterator directly to ''.join() because the
+        # exceptions aren't as detailed.  The list call should be roughly
+        # equivalent to the PySequence_Fast that ''.join() would do.
+        chunks = self.iterencode(o, _one_shot=True)
+        if not isinstance(chunks, (list, tuple)):
+            chunks = list(chunks)
+        if self.ensure_ascii:
+            return ''.join(chunks)
+        else:
+            return u''.join(chunks)
+
+    def iterencode(self, o, _one_shot=False):
+        """Encode the given object and yield each string
+        representation as available.
+
+        For example::
+
+            for chunk in JSONEncoder().iterencode(bigobject):
+                mysocket.write(chunk)
+
+        """
+        if self.check_circular:
+            markers = {}
+        else:
+            markers = None
+        if self.ensure_ascii:
+            _encoder = encode_basestring_ascii
+        else:
+            _encoder = encode_basestring
+        if self.encoding != 'utf-8':
+            def _encoder(o, _orig_encoder=_encoder, _encoding=self.encoding):
+                if isinstance(o, str):
+                    o = o.decode(_encoding)
+                return _orig_encoder(o)
+
+        def floatstr(o, allow_nan=self.allow_nan,
+                _repr=FLOAT_REPR, _inf=PosInf, _neginf=-PosInf):
+            # Check for specials. Note that this type of test is processor
+            # and/or platform-specific, so do tests which don't depend on
+            # the internals.
+
+            if o != o:
+                text = 'NaN'
+            elif o == _inf:
+                text = 'Infinity'
+            elif o == _neginf:
+                text = '-Infinity'
+            else:
+                return _repr(o)
+
+            if not allow_nan:
+                raise ValueError(
+                    "Out of range float values are not JSON compliant: " +
+                    repr(o))
+
+            return text
+
+
+        key_memo = {}
+        if (_one_shot and c_make_encoder is not None
+                and self.indent is None):
+            _iterencode = c_make_encoder(
+                markers, self.default, _encoder, self.indent,
+                self.key_separator, self.item_separator, self.sort_keys,
+                self.skipkeys, self.allow_nan, key_memo, self.use_decimal)
+        else:
+            _iterencode = _make_iterencode(
+                markers, self.default, _encoder, self.indent, floatstr,
+                self.key_separator, self.item_separator, self.sort_keys,
+                self.skipkeys, _one_shot, self.use_decimal)
+        try:
+            return _iterencode(o, 0)
+        finally:
+            key_memo.clear()
+
+
+class JSONEncoderForHTML(JSONEncoder):
+    """An encoder that produces JSON safe to embed in HTML.
+
+    To embed JSON content in, say, a script tag on a web page, the
+    characters &, < and > should be escaped. They cannot be escaped
+    with the usual entities (e.g. &) because they are not expanded
+    within <script> tags.
+    """
+
+    def encode(self, o):
+        # Override JSONEncoder.encode because it has hacks for
+        # performance that make things more complicated.
+        chunks = self.iterencode(o, True)
+        if self.ensure_ascii:
+            return ''.join(chunks)
+        else:
+            return u''.join(chunks)
+
+    def iterencode(self, o, _one_shot=False):
+        chunks = super(JSONEncoderForHTML, self).iterencode(o, _one_shot)
+        for chunk in chunks:
+            chunk = chunk.replace('&', '\\u0026')
+            chunk = chunk.replace('<', '\\u003c')
+            chunk = chunk.replace('>', '\\u003e')
+            yield chunk
+
+
+def _make_iterencode(markers, _default, _encoder, _indent, _floatstr,
+        _key_separator, _item_separator, _sort_keys, _skipkeys, _one_shot,
+        _use_decimal,
+        ## HACK: hand-optimized bytecode; turn globals into locals
+        False=False,
+        True=True,
+        ValueError=ValueError,
+        basestring=basestring,
+        Decimal=Decimal,
+        dict=dict,
+        float=float,
+        id=id,
+        int=int,
+        isinstance=isinstance,
+        list=list,
+        long=long,
+        str=str,
+        tuple=tuple,
+    ):
+
+    def _iterencode_list(lst, _current_indent_level):
+        if not lst:
+            yield '[]'
+            return
+        if markers is not None:
+            markerid = id(lst)
+            if markerid in markers:
+                raise ValueError("Circular reference detected")
+            markers[markerid] = lst
+        buf = '['
+        if _indent is not None:
+            _current_indent_level += 1
+            newline_indent = '\n' + (_indent * _current_indent_level)
+            separator = _item_separator + newline_indent
+            buf += newline_indent
+        else:
+            newline_indent = None
+            separator = _item_separator
+        first = True
+        for value in lst:
+            if first:
+                first = False
+            else:
+                buf = separator
+            if isinstance(value, basestring):
+                yield buf + _encoder(value)
+            elif value is None:
+                yield buf + 'null'
+            elif value is True:
+                yield buf + 'true'
+            elif value is False:
+                yield buf + 'false'
+            elif isinstance(value, (int, long)):
+                yield buf + str(value)
+            elif isinstance(value, float):
+                yield buf + _floatstr(value)
+            elif _use_decimal and isinstance(value, Decimal):
+                yield buf + str(value)
+            else:
+                yield buf
+                if isinstance(value, (list, tuple)):
+                    chunks = _iterencode_list(value, _current_indent_level)
+                elif isinstance(value, dict):
+                    chunks = _iterencode_dict(value, _current_indent_level)
+                else:
+                    chunks = _iterencode(value, _current_indent_level)
+                for chunk in chunks:
+                    yield chunk
+        if newline_indent is not None:
+            _current_indent_level -= 1
+            yield '\n' + (_indent * _current_indent_level)
+        yield ']'
+        if markers is not None:
+            del markers[markerid]
+
+    def _iterencode_dict(dct, _current_indent_level):
+        if not dct:
+            yield '{}'
+            return
+        if markers is not None:
+            markerid = id(dct)
+            if markerid in markers:
+                raise ValueError("Circular reference detected")
+            markers[markerid] = dct
+        yield '{'
+        if _indent is not None:
+            _current_indent_level += 1
+            newline_indent = '\n' + (_indent * _current_indent_level)
+            item_separator = _item_separator + newline_indent
+            yield newline_indent
+        else:
+            newline_indent = None
+            item_separator = _item_separator
+        first = True
+        if _sort_keys:
+            items = dct.items()
+            items.sort(key=lambda kv: kv[0])
+        else:
+            items = dct.iteritems()
+        for key, value in items:
+            if isinstance(key, basestring):
+                pass
+            # JavaScript is weakly typed for these, so it makes sense to
+            # also allow them.  Many encoders seem to do something like this.
+            elif isinstance(key, float):
+                key = _floatstr(key)
+            elif key is True:
+                key = 'true'
+            elif key is False:
+                key = 'false'
+            elif key is None:
+                key = 'null'
+            elif isinstance(key, (int, long)):
+                key = str(key)
+            elif _skipkeys:
+                continue
+            else:
+                raise TypeError("key " + repr(key) + " is not a string")
+            if first:
+                first = False
+            else:
+                yield item_separator
+            yield _encoder(key)
+            yield _key_separator
+            if isinstance(value, basestring):
+                yield _encoder(value)
+            elif value is None:
+                yield 'null'
+            elif value is True:
+                yield 'true'
+            elif value is False:
+                yield 'false'
+            elif isinstance(value, (int, long)):
+                yield str(value)
+            elif isinstance(value, float):
+                yield _floatstr(value)
+            elif _use_decimal and isinstance(value, Decimal):
+                yield str(value)
+            else:
+                if isinstance(value, (list, tuple)):
+                    chunks = _iterencode_list(value, _current_indent_level)
+                elif isinstance(value, dict):
+                    chunks = _iterencode_dict(value, _current_indent_level)
+                else:
+                    chunks = _iterencode(value, _current_indent_level)
+                for chunk in chunks:
+                    yield chunk
+        if newline_indent is not None:
+            _current_indent_level -= 1
+            yield '\n' + (_indent * _current_indent_level)
+        yield '}'
+        if markers is not None:
+            del markers[markerid]
+
+    def _iterencode(o, _current_indent_level):
+        if isinstance(o, basestring):
+            yield _encoder(o)
+        elif o is None:
+            yield 'null'
+        elif o is True:
+            yield 'true'
+        elif o is False:
+            yield 'false'
+        elif isinstance(o, (int, long)):
+            yield str(o)
+        elif isinstance(o, float):
+            yield _floatstr(o)
+        elif isinstance(o, (list, tuple)):
+            for chunk in _iterencode_list(o, _current_indent_level):
+                yield chunk
+        elif isinstance(o, dict):
+            for chunk in _iterencode_dict(o, _current_indent_level):
+                yield chunk
+        elif _use_decimal and isinstance(o, Decimal):
+            yield str(o)
+        else:
+            if markers is not None:
+                markerid = id(o)
+                if markerid in markers:
+                    raise ValueError("Circular reference detected")
+                markers[markerid] = o
+            o = _default(o)
+            for chunk in _iterencode(o, _current_indent_level):
+                yield chunk
+            if markers is not None:
+                del markers[markerid]
+
+    return _iterencode

ADDED   gluon/contrib/simplejson/ordered_dict.py
Index: gluon/contrib/simplejson/ordered_dict.py
==================================================================
--- /dev/null
+++ gluon/contrib/simplejson/ordered_dict.py
@@ -0,0 +1,119 @@
+"""Drop-in replacement for collections.OrderedDict by Raymond Hettinger
+
+http://code.activestate.com/recipes/576693/
+
+"""
+from UserDict import DictMixin
+
+# Modified from original to support Python 2.4, see
+# http://code.google.com/p/simplejson/issues/detail?id=53
+try:
+    all
+except NameError:
+    def all(seq):
+        for elem in seq:
+            if not elem:
+                return False
+        return True
+
+class OrderedDict(dict, DictMixin):
+
+    def __init__(self, *args, **kwds):
+        if len(args) > 1:
+            raise TypeError('expected at most 1 arguments, got %d' % len(args))
+        try:
+            self.__end
+        except AttributeError:
+            self.clear()
+        self.update(*args, **kwds)
+
+    def clear(self):
+        self.__end = end = []
+        end += [None, end, end]         # sentinel node for doubly linked list
+        self.__map = {}                 # key --> [key, prev, next]
+        dict.clear(self)
+
+    def __setitem__(self, key, value):
+        if key not in self:
+            end = self.__end
+            curr = end[1]
+            curr[2] = end[1] = self.__map[key] = [key, curr, end]
+        dict.__setitem__(self, key, value)
+
+    def __delitem__(self, key):
+        dict.__delitem__(self, key)
+        key, prev, next = self.__map.pop(key)
+        prev[2] = next
+        next[1] = prev
+
+    def __iter__(self):
+        end = self.__end
+        curr = end[2]
+        while curr is not end:
+            yield curr[0]
+            curr = curr[2]
+
+    def __reversed__(self):
+        end = self.__end
+        curr = end[1]
+        while curr is not end:
+            yield curr[0]
+            curr = curr[1]
+
+    def popitem(self, last=True):
+        if not self:
+            raise KeyError('dictionary is empty')
+        # Modified from original to support Python 2.4, see
+        # http://code.google.com/p/simplejson/issues/detail?id=53
+        if last:
+            key = reversed(self).next()
+        else:
+            key = iter(self).next()
+        value = self.pop(key)
+        return key, value
+
+    def __reduce__(self):
+        items = [[k, self[k]] for k in self]
+        tmp = self.__map, self.__end
+        del self.__map, self.__end
+        inst_dict = vars(self).copy()
+        self.__map, self.__end = tmp
+        if inst_dict:
+            return (self.__class__, (items,), inst_dict)
+        return self.__class__, (items,)
+
+    def keys(self):
+        return list(self)
+
+    setdefault = DictMixin.setdefault
+    update = DictMixin.update
+    pop = DictMixin.pop
+    values = DictMixin.values
+    items = DictMixin.items
+    iterkeys = DictMixin.iterkeys
+    itervalues = DictMixin.itervalues
+    iteritems = DictMixin.iteritems
+
+    def __repr__(self):
+        if not self:
+            return '%s()' % (self.__class__.__name__,)
+        return '%s(%r)' % (self.__class__.__name__, self.items())
+
+    def copy(self):
+        return self.__class__(self)
+
+    @classmethod
+    def fromkeys(cls, iterable, value=None):
+        d = cls()
+        for key in iterable:
+            d[key] = value
+        return d
+
+    def __eq__(self, other):
+        if isinstance(other, OrderedDict):
+            return len(self)==len(other) and \
+                   all(p==q for p, q in  zip(self.items(), other.items()))
+        return dict.__eq__(self, other)
+
+    def __ne__(self, other):
+        return not self == other

ADDED   gluon/contrib/simplejson/scanner.py
Index: gluon/contrib/simplejson/scanner.py
==================================================================
--- /dev/null
+++ gluon/contrib/simplejson/scanner.py
@@ -0,0 +1,78 @@
+"""JSON token scanner
+"""
+import re
+def _import_c_make_scanner():
+    try:
+        raise ImportError # because assumes simplejson in path
+        from simplejson._speedups import make_scanner
+        return make_scanner
+    except ImportError:
+        return None
+c_make_scanner = _import_c_make_scanner()
+
+__all__ = ['make_scanner']
+
+NUMBER_RE = re.compile(
+    r'(-?(?:0|[1-9]\d*))(\.\d+)?([eE][-+]?\d+)?',
+    (re.VERBOSE | re.MULTILINE | re.DOTALL))
+
+def py_make_scanner(context):
+    parse_object = context.parse_object
+    parse_array = context.parse_array
+    parse_string = context.parse_string
+    match_number = NUMBER_RE.match
+    encoding = context.encoding
+    strict = context.strict
+    parse_float = context.parse_float
+    parse_int = context.parse_int
+    parse_constant = context.parse_constant
+    object_hook = context.object_hook
+    object_pairs_hook = context.object_pairs_hook
+    memo = context.memo
+
+    def _scan_once(string, idx):
+        try:
+            nextchar = string[idx]
+        except IndexError:
+            raise StopIteration
+
+        if nextchar == '"':
+            return parse_string(string, idx + 1, encoding, strict)
+        elif nextchar == '{':
+            return parse_object((string, idx + 1), encoding, strict,
+                _scan_once, object_hook, object_pairs_hook, memo)
+        elif nextchar == '[':
+            return parse_array((string, idx + 1), _scan_once)
+        elif nextchar == 'n' and string[idx:idx + 4] == 'null':
+            return None, idx + 4
+        elif nextchar == 't' and string[idx:idx + 4] == 'true':
+            return True, idx + 4
+        elif nextchar == 'f' and string[idx:idx + 5] == 'false':
+            return False, idx + 5
+
+        m = match_number(string, idx)
+        if m is not None:
+            integer, frac, exp = m.groups()
+            if frac or exp:
+                res = parse_float(integer + (frac or '') + (exp or ''))
+            else:
+                res = parse_int(integer)
+            return res, m.end()
+        elif nextchar == 'N' and string[idx:idx + 3] == 'NaN':
+            return parse_constant('NaN'), idx + 3
+        elif nextchar == 'I' and string[idx:idx + 8] == 'Infinity':
+            return parse_constant('Infinity'), idx + 8
+        elif nextchar == '-' and string[idx:idx + 9] == '-Infinity':
+            return parse_constant('-Infinity'), idx + 9
+        else:
+            raise StopIteration
+
+    def scan_once(string, idx):
+        try:
+            return _scan_once(string, idx)
+        finally:
+            memo.clear()
+
+    return scan_once
+
+make_scanner = c_make_scanner or py_make_scanner

ADDED   gluon/contrib/simplejson/tool.py
Index: gluon/contrib/simplejson/tool.py
==================================================================
--- /dev/null
+++ gluon/contrib/simplejson/tool.py
@@ -0,0 +1,42 @@
+r"""Command-line tool to validate and pretty-print JSON
+
+Usage::
+
+    $ echo '{"json":"obj"}' | python -m simplejson.tool
+    {
+        "json": "obj"
+    }
+    $ echo '{ 1.2:3.4}' | python -m simplejson.tool
+    Expecting property name: line 1 column 2 (char 2)
+
+"""
+import sys
+import simplejson as json
+
+def main():
+    if len(sys.argv) == 1:
+        infile = sys.stdin
+        outfile = sys.stdout
+    elif len(sys.argv) == 2:
+        infile = open(sys.argv[1], 'rb')
+        outfile = sys.stdout
+    elif len(sys.argv) == 3:
+        infile = open(sys.argv[1], 'rb')
+        outfile = open(sys.argv[2], 'wb')
+    else:
+        raise SystemExit(sys.argv[0] + " [infile [outfile]]")
+    try:
+        try:
+            obj = json.load(infile,
+                            object_pairs_hook=json.OrderedDict,
+                            use_decimal=True)
+        except ValueError, e:
+            raise SystemExit(e)
+        json.dump(obj, outfile, sort_keys=True, indent='    ', use_decimal=True)
+        outfile.write('\n')
+    finally:
+        infile.close()
+        outfile.close()
+
+if __name__ == '__main__':
+    main()

ADDED   gluon/contrib/sms_utils.py
Index: gluon/contrib/sms_utils.py
==================================================================
--- /dev/null
+++ gluon/contrib/sms_utils.py
@@ -0,0 +1,113 @@
+SMSCODES = {
+    'Aliant':'@chat.wirefree.ca',
+    'Alltel':'@message.alltel.com',
+    'Ameritech':'@paging.acswireless.com',
+    'AT&T':'@txt.att.net',
+    'AU by KDDI':'@ezweb.ne.jp',
+    'BeeLine GSM':'@sms.beemail.ru',
+    'Bell Mobility Canada':'@txt.bellmobility.ca',
+    'Bellsouth':'@bellsouth.cl',
+    'BellSouth Mobility':'@blsdcs.net',
+    'Blue Sky Frog':'@blueskyfrog.com',
+    'Boost':'@myboostmobile.com',
+    'Cellular South':'@csouth1.com',
+    'CellularOne':'@mobile.celloneusa.com',
+    'CellularOne West':'@mycellone.com',
+    'Cincinnati Bell':'@gocbw.com',
+    'Claro':'@clarotorpedo.com.br',
+    'Comviq':'@sms.comviq.se',
+    'Dutchtone/Orange-NL':'@sms.orange.nl',
+    'Edge Wireless':'@sms.edgewireless.com',
+    'EinsteinPCS / Airadigm Communications':'@einsteinsms.com',
+    'EPlus':'@smsmail.eplus.de',
+    'Fido Canada':'@fido.ca',
+    'Golden Telecom':'@sms.goldentele.com',
+    'Idea Cellular':'@ideacellular.net',
+    'Kyivstar':'@sms.kyivstar.net',
+    'LMT':'@sms.lmt.lv',
+    'Manitoba Telecom Systems':'@text.mtsmobility.com',
+    'Meteor':'@sms.mymeteor.ie',
+    'Metro PCS':'@mymetropcs.com',
+    'Metrocall Pager':'@page.metrocall.com',
+    'MobileOne':'@m1.com.sg',
+    'Mobilfone':'@page.mobilfone.com',
+    'Mobility Bermuda':'@ml.bm',
+    'Netcom':'@sms.netcom.no',
+    'Nextel':'@messaging.nextel.com',
+    'NPI Wireless':'@npiwireless.com',
+    'O2':'@o2.co.uk',
+    'O2 M-mail':'@mmail.co.uk',
+    'Optus':'@optusmobile.com.au',
+    'Orange':'@orange.net',
+    'Oskar':'@mujoskar.cz',
+    'Pagenet':'@pagenet.net',
+    'PCS Rogers':'@pcs.rogers.com',
+    'Personal Communication':'@pcom.ru',
+    'Plus GSM Poland':'@text.plusgsm.pl',
+    'Powertel':'@ptel.net',
+    'Primtel':'@sms.primtel.ru',
+    'PSC Wireless':'@sms.pscel.com',
+    'Qualcomm':'@pager.qualcomm.com',
+    'Qwest':'@qwestmp.com',
+    'Safaricom':'@safaricomsms.com',
+    'Satelindo GSM':'@satelindogsm.com',
+    'SCS-900':'@scs-900.ru',
+    'Simple Freedom':'@text.simplefreedom.net',
+    'Skytel - Alphanumeric':'@skytel.com',
+    'Smart Telecom':'@mysmart.mymobile.ph',
+    'Southern Linc':'@page.southernlinc.com',
+    'Sprint PCS':'@messaging.sprintpcs.com',
+    'Sprint PCS - Short Mail':'@sprintpcs.com',
+    'SunCom':'@tms.suncom.com',
+    'SureWest Communications':'@mobile.surewest.com',
+    'SwissCom Mobile':'@bluewin.ch',
+    'T-Mobile Germany':'@T-D1-SMS.de',
+    'T-Mobile Netherlands':'@gin.nl',
+    'T-Mobile UK':'@t-mobile.uk.net',
+    'T-Mobile USA (tmail)':'@tmail.com',
+    'T-Mobile USA (tmomail)':'@tmomail.net',
+    'Tele2 Latvia':'@sms.tele2.lv',
+    'Telefonica Movistar':'@movistar.net',
+    'Telenor':'@mobilpost.no',
+    'Telia Denmark':'@gsm1800.telia.dk',
+    'Telus Mobility':'@msg.telus.com',
+    'The Phone House':'@sms.phonehouse.de',
+    'TIM':'@timnet.com',
+    'UMC':'@sms.umc.com.ua',
+    'Unicel':'@utext.com',
+    'US Cellular':'@email.uscc.net',
+    'Verizon Wireless (vtext)':'@vtext.com',
+    'Verizon Wireless (airtouchpaging)':'@airtouchpaging.com',
+    'Verizon Wireless (myairmail)':'@myairmail.com',
+    'Vessotel':'@pager.irkutsk.ru',
+    'Virgin Mobile Canada':'@vmobile.ca',
+    'Virgin Mobile USA':'@vmobl.com',
+    'Vodafone Italy':'@sms.vodafone.it',
+    'Vodafone Japan (n)':'@n.vodafone.ne.jp',
+    'Vodafone Japan (d)':'@d.vodafone.ne.jp',
+    'Vodafone Japan (r)':'@r.vodafone.ne.jp',
+    'Vodafone Japan (k)':'@k.vodafone.ne.jp',
+    'Vodafone Japan (t)':'@t.vodafone.ne.jp',
+    'Vodafone Japan (q)':'@q.vodafone.ne.jp',
+    'Vodafone Japan (s)':'@s.vodafone.ne.jp',
+    'Vodafone Japan (h)':'@h.vodafone.ne.jp',
+    'Vodafone Japan (c)':'@c.vodafone.ne.jp',
+    'Vodafone Spain':'@vodafone.es',
+    'Vodafone UK':'@vodafone.net',
+    'Weblink Wireless':'@airmessage.net',
+    'WellCom':'@sms.welcome2well.com',
+    'WyndTell':'@wyndtell.com',
+    }
+
+def sms_email(number,provider):
+    """
+    >>> print sms_email('1 (312) 375-6536','T-Mobile USA (tmail)')
+    print 13123756536@tmail.com
+    """
+    import re
+    if number[0]=='+1': number=number[1:]
+    elif number[0]=='+': number=number[3:]
+    elif number[:2]=='00': number=number[3:]
+    number=re.sub('[^\d]','',number)
+    return number+SMSCODES[provider]
+

ADDED   gluon/contrib/spreadsheet.py
Index: gluon/contrib/spreadsheet.py
==================================================================
--- /dev/null
+++ gluon/contrib/spreadsheet.py
@@ -0,0 +1,263 @@
+"""
+Developed by Massimo Di Pierro, optional component of web2py, GPL2 license.
+"""
+import re
+import pickle
+import copy
+
+
+def quote(text):
+    return str(text).replace('\\', '\\\\').replace("'", "\\'")
+
+
+class Node:
+    """
+    Example::
+
+         # controller
+         from gluon.contrib.spreadsheet import Sheet
+
+         def callback():
+             return cache.ram('sheet1', lambda: None, None).process(request)
+
+         def index():
+             sheet = cache.ram('sheet1',
+                 lambda: Sheet(10, 10, URL(r=request, f='callback')), 0)
+             #sheet.cell('r0c3', value='=r0c0+r0c1+r0c2', readonly=True)
+             return dict(sheet=sheet)
+
+         # view
+         {{extend 'layout.html'}}
+         {{=sheet}}
+
+         or insert invidivual cells via
+
+         {{=sheet.nodes['r0c0']}}
+
+    """
+
+    def __init__(self, name, value, url='.', readonly=False, active=True,
+            onchange=None):
+        self.url = url
+        self.name = name
+        self.value = str(value)
+        self.computed_value = ''
+        self.incoming = {}
+        self.outcoming = {}
+        self.readonly = readonly
+        self.active = active
+        self.onchange = onchange
+        self.size = 4
+        self.locked = False
+
+    def xml(self):
+        return """<input name="%s" id="%s" value="%s" size="%s"
+        onkeyup="ajax('%s/keyup',['%s'], ':eval');"
+        onfocus="ajax('%s/focus',['%s'], ':eval');"
+        onblur="ajax('%s/blur',['%s'], ':eval');" %s/>
+        """ % (self.name, self.name, self.computed_value, self.size,
+               self.url, self.name, self.url, self.name, self.url, self.name,
+               (self.readonly and 'readonly ') or '')
+
+    def __repr__(self):
+        return '%s:%s' % (self.name, self.computed_value)
+
+
+class Sheet:
+
+    regex=re.compile('(?<!\w)[a-zA-Z_]\w*')
+
+    re_strings = re.compile(r'(?P<name>'
+                            + r"[uU]?[rR]?'''([^']+|'{1,2}(?!'))*'''|"
+                            + r"'([^'\\]|\\.)*'|"
+                            + r'"""([^"]|"{1,2}(?!"))*"""|'
+                            + r'"([^"\\]|\\.)*")', re.DOTALL)
+
+    def dumps(self):
+        dump = pickle.dumps(self)
+        return dump
+
+    @staticmethod
+    def loads(data):
+        sheet = pickle.loads(data)
+        return sheet
+
+    def process(self, request):
+        """
+        call this in action that creates table, it will handle ajax callbacks
+        """
+        cell = request.vars.keys()[0]
+        if request.args(0) == 'focus':
+            return "jQuery('#%s').val('%s');" % (cell, quote(self[cell].value))
+        value = request.vars[cell]
+        self[cell] = value
+        if request.args(0) == 'blur':
+            return "jQuery('#%s').val('%s');" \
+                % (cell, quote(self[cell].computed_value))
+        elif request.args(0) == 'keyup':
+            jquery = ''
+            for other_key in self.modified:
+                if other_key != cell:
+                    jquery += "jQuery('#%s').val('%s');" % \
+                        (other_key, quote(self[other_key].computed_value))
+        return jquery
+
+    def __init__(self, rows, cols, url='.', readonly=False, active=True,
+            onchange=None):
+        self.rows = rows
+        self.cols = cols
+        self.url = url
+        self.nodes = {}
+        self.error = 'ERROR: %(error)s'
+        self.allowed_keywords = ['for', 'in', 'if', 'else', 'and', 'or', 'not',
+                               'i', 'j', 'k', 'x', 'y', 'z', 'sum']
+        self.environment = {}
+        [self.cell('r%sc%s'%(k/cols, k%cols), '0.0', readonly, active, onchange)
+            for k in xrange(rows*cols)]
+        exec('from math import *', {}, self.environment)
+
+    def delete_from(self, other_list):
+        indices = [k for (k, node) in enumerate(other_list) if k == node]
+        if indices:
+            del other_list[indices[0]]
+
+    def changed(self, node, changed_nodes=[]):
+        for other_node in node.outcoming:
+            if not other_node in changed_nodes:
+                changed_nodes.append(other_node)
+                self.changed(other_node, changed_nodes)
+        return changed_nodes
+
+    def define(self, name, obj):
+        self.environment[name] = obj
+
+    def cell(self, key, value, readonly=False, active=True, onchange=None):
+        """
+        key is the name of the cell
+        value is the initial value of the cell. It can be a formula "=1+3"
+        a cell is active if it evaluates formuls
+        """
+        key = str(key)
+        if not self.regex.match(key):
+            raise SyntaxError, "Invalid cell name: %s" % key
+        node = Node(key, value, self.url, readonly, active, onchange)
+        self.nodes[key] = node
+        self[key] = value
+
+    def __setitem__(self, key, value):
+        key = str(key)
+        value = str(value)
+        node = self.nodes[key]
+        node.value = value
+        if value[:1] == '=' and node.active:
+            # clear all edges involving current node
+            for other_node in node.incoming:
+                del other_node.outcoming[node]
+            node.incoming.clear()
+            # build new edges
+            command = self.re_strings.sub("''", value[1:])
+            node.locked = False
+            for match in self.regex.finditer(command):
+                other_key = match.group()
+                if other_key == key:
+                    self.computed_value = self.error % dict(error='cycle')
+                    self.modified={}
+                    break
+                if other_key in self.nodes:
+                    other_node = self.nodes[other_key]
+                    other_node.outcoming[node] = True
+                    node.incoming[other_node] = True
+                elif not other_key in self.allowed_keywords and \
+                        not other_key in self.environment:
+                    node.locked = True
+                    node.computed_value = \
+                        self.error % dict(error='invalid keyword: ' + other_key)
+                    self.modified = {}
+                    break
+            self.compute(node)
+        else:
+            try:
+                node.computed_value = int(node.value)
+            except:
+                try:
+                    node.computed_value = float(node.value)
+                except:
+                    node.computed_value = node.value
+            self.environment[key] = node.computed_value
+            if node.onchange:
+                node.onchange(node)
+        self.modified = self.iterate(node)
+
+    def compute(self, node):
+        if node.value[:1] == '=' and not node.locked:
+            try:
+                exec('__value__=' + node.value[1:], {}, self.environment)
+                node.computed_value = self.environment['__value__']
+                del self.environment['__value__']
+            except Exception, e:
+                node.computed_value = self.error % dict(error=str(e))
+        self.environment[node.name] = node.computed_value
+        if node.onchange:
+            node.onchange(node)
+
+    def iterate(self, node):
+        output = {node.name: node.computed_value}
+        changed_nodes = self.changed(node)
+        while changed_nodes:
+            ok=False
+            set_changed_nodes = set(changed_nodes)
+            for (k, other_node) in enumerate(changed_nodes):
+                #print other_node, changed_nodes
+                if not set(other_node.incoming.keys()).\
+                        intersection(set_changed_nodes):
+                    #print 'ok'
+                    self.compute(other_node)
+                    output[other_node.name] = other_node.computed_value
+                    #print other_node
+                    del changed_nodes[k]
+                    ok = True
+                    break
+            if not ok:
+                return {}
+        return output
+
+    def __getitem__(self, key):
+        return self.nodes[str(key)]
+
+    def get_computed_values(self):
+        d={}
+        for key in self.nodes:
+            node = self.nodes[key]
+            if node.value[:1] != '=' or not node.active:
+                d[key] = node.computed_value
+        return d
+
+    def set_computed_values(self, d):
+        for key in d:
+            if not key in self.nodes:
+                continue
+            node = self.nodes[key]
+            if node.value[:1] != '=' or not node.active:
+                node.value = d[key]
+
+    def xml(self):
+        import gluon.html
+        (DIV, TABLE, TR, TD, TH, BR) = \
+            (gluon.html.DIV, gluon.html.TABLE, gluon.html.TR, gluon.html.TD,
+             gluon.html.TH, gluon.html.BR)
+        regex = re.compile('r\d+c\d+')
+        return DIV(TABLE(TR(TH(), *[TH('c%s' % c) for c in range(self.cols)]),
+                         *[TR(TH('r%s' % r), *[TD(self.nodes['r%sc%s'%(r, c)]) \
+                                                  for c in range(self.cols)]) \
+                                                    for r in range(self.rows)]),
+                   BR(),
+                   TABLE(*[TR(TH(key), TD(self.nodes[key])) \
+                       for key in self.nodes if not regex.match(key)])).xml()
+
+if __name__ == '__main__':
+    s = Sheet(0, 0)
+    s.cell('a', value="2")
+    s.cell('b', value="=sin(a)")
+    s.cell('c', value="=cos(a)**2+b*b")
+    print s['c'].computed_value
+

ADDED   gluon/contrib/taskbar_widget.py
Index: gluon/contrib/taskbar_widget.py
==================================================================
--- /dev/null
+++ gluon/contrib/taskbar_widget.py
@@ -0,0 +1,244 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+# # Creates a taskbar icon for web2py
+# # Author: Mark Larsen, mostly stolen from Mark Hammond's
+# #   C:\Python25\Lib\site-packages\win32\Demos\win32gui_taskbar.py
+# # 11/7/08
+# dual licensed under the web2py license (LGPL) and the Python license.
+
+import os
+import sys
+import base64
+import win32con
+import win32api
+import win32gui
+
+
+class TaskBarIcon:
+
+    def __init__(self, iconPath=None):
+
+        self.iconPath = iconPath
+        self.status = []
+
+        msg_TaskbarRestart = \
+            win32api.RegisterWindowMessage('TaskbarCreated')
+        message_map = {
+            msg_TaskbarRestart: self.OnRestart,
+            win32con.WM_DESTROY: self.OnDestroy,
+            win32con.WM_COMMAND: self.OnCommand,
+            win32con.WM_USER + 20: self.OnTaskbarNotify,
+            }
+
+        # Register the Window class.
+
+        wc = win32gui.WNDCLASS()
+        hinst = wc.hInstance = win32api.GetModuleHandle(None)
+        wc.lpszClassName = 'web2pyTaskbar'
+        wc.style = win32con.CS_VREDRAW | win32con.CS_HREDRAW
+        wc.hCursor = win32gui.LoadCursor(0, win32con.IDC_ARROW)
+        wc.hbrBackground = win32con.COLOR_WINDOW
+        wc.lpfnWndProc = message_map  # could also specify a wndproc.
+        classAtom = win32gui.RegisterClass(wc)
+
+        # Create the Window.
+
+        style = win32con.WS_OVERLAPPED | win32con.WS_SYSMENU
+        self.hwnd = win32gui.CreateWindow(
+            classAtom,
+            'web2pyTaskbar',
+            style,
+            0,
+            0,
+            win32con.CW_USEDEFAULT,
+            win32con.CW_USEDEFAULT,
+            0,
+            0,
+            hinst,
+            None,
+            )
+        win32gui.UpdateWindow(self.hwnd)
+        self.SetServerStopped()
+
+    def __createIcon(self):
+
+        # try and use custom icon
+
+        if self.iconPath and os.path.isfile(self.iconPath):
+            hicon = self.__loadFromFile(self.iconPath)
+        else:
+            try:
+                fp = 'tmp.ico'
+                icFH = file(fp, 'wb')
+                if self.serverState == self.EnumServerState.STOPPED:
+                    icFH.write(base64.b64decode(self.__getIconStopped()))
+                elif self.serverState == self.EnumServerState.RUNNING:
+                    icFH.write(base64.b64decode(self.__getIconRunning()))
+                icFH.close()
+                hicon = self.__loadFromFile(fp)
+                os.unlink(fp)
+            except:
+                print "Can't load web2py icons - using default"
+                hicon = win32gui.LoadIcon(0, win32con.IDI_APPLICATION)
+
+        flags = win32gui.NIF_ICON | win32gui.NIF_MESSAGE\
+             | win32gui.NIF_TIP
+        nid = (
+            self.hwnd,
+            0,
+            flags,
+            win32con.WM_USER + 20,
+            hicon,
+            'web2py Framework',
+            )
+        try:
+            win32gui.Shell_NotifyIcon(win32gui.NIM_MODIFY, nid)
+        except:
+            try:
+                win32gui.Shell_NotifyIcon(win32gui.NIM_ADD, nid)
+            except win32api.error:
+
+                # This is common when windows is starting, and this code is hit
+                # before the taskbar has been created.
+
+                print 'Failed to add the taskbar icon - is explorer running?'
+
+                # but keep running anyway - when explorer starts, we get the
+
+    def OnRestart(
+        self,
+        hwnd,
+        msg,
+        wparam,
+        lparam,
+        ):
+        self._DoCreateIcons()
+
+    def OnDestroy(
+        self,
+        hwnd,
+        msg,
+        wparam,
+        lparam,
+        ):
+        nid = (self.hwnd, 0)
+        win32gui.Shell_NotifyIcon(win32gui.NIM_DELETE, nid)
+
+    def OnTaskbarNotify(
+        self,
+        hwnd,
+        msg,
+        wparam,
+        lparam,
+        ):
+        if lparam == win32con.WM_LBUTTONUP:
+            pass
+        elif lparam == win32con.WM_LBUTTONDBLCLK:
+            pass
+        elif lparam == win32con.WM_RBUTTONUP:
+            menu = win32gui.CreatePopupMenu()
+            win32gui.AppendMenu(menu, win32con.MF_STRING, 1023,
+                                'Toggle Display')
+            win32gui.AppendMenu(menu, win32con.MF_SEPARATOR, 0, '')
+            if self.serverState == self.EnumServerState.STOPPED:
+                win32gui.AppendMenu(menu, win32con.MF_STRING, 1024,
+                                    'Start Server')
+                win32gui.AppendMenu(menu, win32con.MF_STRING
+                                     | win32con.MF_GRAYED, 1025,
+                                    'Restart Server')
+                win32gui.AppendMenu(menu, win32con.MF_STRING
+                                     | win32con.MF_GRAYED, 1026,
+                                    'Stop Server')
+            else:
+                win32gui.AppendMenu(menu, win32con.MF_STRING
+                                     | win32con.MF_GRAYED, 1024,
+                                    'Start Server')
+                win32gui.AppendMenu(menu, win32con.MF_STRING, 1025,
+                                    'Restart Server')
+                win32gui.AppendMenu(menu, win32con.MF_STRING, 1026,
+                                    'Stop Server')
+            win32gui.AppendMenu(menu, win32con.MF_SEPARATOR, 0, '')
+            win32gui.AppendMenu(menu, win32con.MF_STRING, 1027,
+                                'Quit (pid:%i)' % os.getpid())
+            pos = win32gui.GetCursorPos()
+
+            # See http://msdn.microsoft.com/library/default.asp?url=/library/en-us/winui/menus_0hdi.asp
+
+            win32gui.SetForegroundWindow(self.hwnd)
+            win32gui.TrackPopupMenu(
+                menu,
+                win32con.TPM_LEFTALIGN,
+                pos[0],
+                pos[1],
+                0,
+                self.hwnd,
+                None,
+                )
+            win32api.PostMessage(self.hwnd, win32con.WM_NULL, 0, 0)
+        return 1
+
+    def OnCommand(
+        self,
+        hwnd,
+        msg,
+        wparam,
+        lparam,
+        ):
+        id = win32api.LOWORD(wparam)
+        if id == 1023:
+            self.status.append(self.EnumStatus.TOGGLE)
+        elif id == 1024:
+            self.status.append(self.EnumStatus.START)
+        elif id == 1025:
+            self.status.append(self.EnumStatus.RESTART)
+        elif id == 1026:
+            self.status.append(self.EnumStatus.STOP)
+        elif id == 1027:
+            self.status.append(self.EnumStatus.QUIT)
+            self.Destroy()
+        else:
+            print 'Unknown command -', id
+
+    def Destroy(self):
+        win32gui.DestroyWindow(self.hwnd)
+
+    def SetServerRunning(self):
+        self.serverState = self.EnumServerState.RUNNING
+        self.__createIcon()
+
+    def SetServerStopped(self):
+        self.serverState = self.EnumServerState.STOPPED
+        self.__createIcon()
+
+    def __getIconRunning(self):
+        return 'AAABAAEAEBAQAAAAAAAoAQAAFgAAACgAAAAQAAAAIAAAAAEABAAAAAAAgAAAAAAAAAAAAAAAEAAAAAAAAAAAAAAAIXMGAABe/wAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAABERAgAAIAAAEAACAAAgAAABEAIiACIgAAABAgAgIAIAEAECACAgAgABEAIiACACAAAAAAAAAAAAICACIiAiIAICAgIAACACAgICAgAAIAICAgICIiAiIAICAgIAACACAgICAgAAIAICAgICIiAiIAAAAAAAAAAAD//wAAhe8AAL3vAADMYwAA9a0AALWtAADMbQAA//8AAKwjAABV7QAAVe0AAFQjAABV7QAAVe0AAFQjAAD//wAA'
+
+    def __getIconStopped(self):
+        return 'AAABAAEAEBAQAAEABAAoAQAAFgAAACgAAAAQAAAAIAAAAAEABAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAJCdIAIXMGAABe/wAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAzMzMzMzMzAwERMjMzIzAzEDMyMzMjAzMxAzIiMyAjMzMwMjMjAzIzEzECMyAjMjMxEzAiAyMyMzMzMwAzMzMzIyMyACMiIzIyMjAzAyMyMjIyAjMwIzIyMjAyIiMCIzIyAjIzMyAyMjAyMjMzIwIyAjIyIiMiIDAzMzMzMzMzB//gAAhe0AAJ3rAADMYwAA9a0AALGNAADMLQAA/n8AAKwjAABVrQAAUc0AAFQjAABF5QAAVekAABQhAAB//gAA'
+
+    def __loadFromFile(self, iconPath):
+        hinst = win32api.GetModuleHandle(None)
+        icon_flags = win32con.LR_LOADFROMFILE | win32con.LR_DEFAULTSIZE
+        hicon = win32gui.LoadImage(
+            hinst,
+            iconPath,
+            win32con.IMAGE_ICON,
+            0,
+            0,
+            icon_flags,
+            )
+        return hicon
+
+    class EnumStatus:
+
+        TOGGLE = 0
+        START = 1
+        STOP = 2
+        RESTART = 3
+        QUIT = 4
+
+    class EnumServerState:
+
+        RUNNING = 0
+        STOPPED = 1
+

ADDED   gluon/contrib/user_agent_parser.py
Index: gluon/contrib/user_agent_parser.py
==================================================================
--- /dev/null
+++ gluon/contrib/user_agent_parser.py
@@ -0,0 +1,394 @@
+"""
+Extract client information from http user agent
+The module does not try to detect all capabilities of browser in current form (it can easily be extended though).
+Aim is
+    * fast
+    * very easy to extend
+    * reliable enough for practical purposes
+    * and assist python web apps to detect clients.
+    
+Taken from http://pypi.python.org/pypi/httpagentparser (MIT license)
+Modified my Ross Peoples for web2py to better support iPhone and iPad.
+"""
+import sys
+from storage import Storage
+
+class DetectorsHub(dict):
+    _known_types = ['os', 'dist', 'flavor', 'browser']
+
+    def __init__(self, *args, **kw):
+        dict.__init__(self, *args, **kw)
+        for typ in self._known_types:
+            self.setdefault(typ, [])
+        self.registerDetectors()
+
+    def register(self, detector):
+        if detector.info_type not in self._known_types:
+            self[detector.info_type] = [detector]
+            self._known_types.insert(detector.order, detector.info_type)
+        else:
+            self[detector.info_type].append(detector)
+
+    def reorderByPrefs(self, detectors, prefs):
+        if prefs is None:
+            return []
+        elif prefs == []:
+            return detectors
+        else:
+            prefs.insert(0, '')
+            def key_name(d):
+                return d.name in prefs and prefs.index(d.name) or sys.maxint
+            return sorted(detectors, key=key_name)
+
+    def __iter__(self):
+        return iter(self._known_types)
+
+    def registerDetectors(self):
+        detectors = [v() for v in globals().values() \
+                         if DetectorBase in getattr(v, '__mro__', [])]
+        for d in detectors:
+            if d.can_register:
+                self.register(d)
+
+
+class DetectorBase(object):
+    name = "" # "to perform match in DetectorsHub object"
+    info_type = "override me"
+    result_key = "override me"
+    order = 10 # 0 is highest
+    look_for = "string to look for"
+    skip_if_found = [] # strings if present stop processin
+    can_register = False
+    prefs = Storage() # dict(info_type = [name1, name2], ..)
+    version_splitters = ["/", " "]
+    _suggested_detectors = None
+
+    def __init__(self):
+        if not self.name:
+            self.name = self.__class__.__name__
+        self.can_register = (self.__class__.__dict__.get('can_register', True))
+
+    def detect(self, agent, result):
+        if agent and self.checkWords(agent):
+            result[self.info_type] = Storage(name=self.name)
+            version = self.getVersion(agent)
+            if version:
+                result[self.info_type].version = version
+            return True
+        return False
+
+    def checkWords(self, agent):
+        for w in self.skip_if_found:
+            if w in agent:
+                return False
+        if self.look_for:
+            return True
+        return False
+
+    def getVersion(self, agent):
+        # -> version string /None
+        vs = self.version_splitters
+        return agent.split(self.look_for + vs[0])[-1].split(vs[1])[0].strip()
+
+
+class OS(DetectorBase):
+    info_type = "os"
+    can_register = False
+    version_splitters = [";", " "]
+
+
+class Dist(DetectorBase):
+    info_type = "dist"
+    can_register = False
+
+
+class Flavor(DetectorBase):
+    info_type = "flavor"
+    can_register = False
+
+
+class Browser(DetectorBase):
+    info_type = "browser"
+    can_register = False
+
+
+class Macintosh(OS):
+    look_for = 'Macintosh'
+    prefs = Storage(dist=None)
+    def getVersion(self, agent):
+        pass
+
+
+class Firefox(Browser):
+    look_for = "Firefox"
+
+
+class Konqueror(Browser):
+    look_for = "Konqueror"
+    version_splitters = ["/", ";"]
+
+
+class Opera(Browser):
+    look_for = "Opera"
+    def getVersion(self, agent):
+        return agent.split(self.look_for)[1][1:].split(' ')[0]
+
+class Netscape(Browser):
+    look_for = "Netscape"
+
+class MSIE(Browser):
+    look_for = "MSIE"
+    skip_if_found = ["Opera"]
+    name = "Microsoft Internet Explorer"
+    version_splitters = [" ", ";"]
+
+
+class Galeon(Browser):
+    look_for = "Galeon"
+
+
+class Safari(Browser):
+    look_for = "Safari"
+
+    def checkWords(self, agent):
+        unless_list = ["Chrome", "OmniWeb"]
+        if self.look_for in agent:
+            for word in unless_list:
+                if word in agent:
+                    return False
+            return True
+
+    def getVersion(self, agent):
+        if "Version/" in agent:
+            return agent.split('Version/')[-1].split(' ')[0].strip()
+        else:
+            # Mobile Safari
+            return agent.split('Safari ')[-1].split(' ')[0].strip() 
+
+
+class Linux(OS):
+    look_for = 'Linux'
+    prefs = Storage(browser=["Firefox"], 
+                    dist=["Ubuntu", "Android"], flavor=None)
+
+    def getVersion(self, agent):
+        pass
+
+
+class Macintosh(OS):
+    look_for = 'Macintosh'
+    prefs = Storage(dist=None, flavor=['MacOS'])
+    def getVersion(self, agent):
+        pass
+
+
+class MacOS(Flavor):
+    look_for = 'Mac OS'
+    prefs = Storage(browser=['Firefox', 'Opera', "Microsoft Internet Explorer"])
+
+    def getVersion(self, agent):
+        version_end_chars = [';', ')']
+        part = agent.split('Mac OS')[-1].strip()
+        for c in version_end_chars:
+            if c in part:
+                version = part.split(c)[0]
+                break
+        return version.replace('_', '.')
+
+
+class Windows(OS):
+    look_for = 'Windows'
+    prefs = Storage(browser=["Microsoft Internet Explorer", 'Firefox'],
+                    dict=None, flavor=None)
+
+    def getVersion(self, agent):
+        v = agent.split('Windows')[-1].split(';')[0].strip()
+        if ')' in v:
+            v = v.split(')')[0]
+        return v
+
+
+class Ubuntu(Dist):
+    look_for = 'Ubuntu'
+    version_splitters = ["/", " "]
+    prefs = Storage(browser=['Firefox'])
+
+
+class Debian(Dist):
+    look_for = 'Debian'
+    version_splitters = ["/", " "]
+    prefs = Storage(browser=['Firefox'])
+
+
+class Chrome(Browser):
+    look_for = "Chrome"
+    version_splitters = ["/", " "]
+
+class ChromeOS(OS):
+    look_for = "CrOS"
+    version_splitters = [" ", " "]
+    prefs = Storage(browser=['Chrome'])
+    def getVersion(self, agent):
+        vs = self.version_splitters
+        return agent.split(self.look_for+vs[0])[-1].split(vs[1])[1].strip()[:-1]
+
+class Android(Dist):
+    look_for = 'Android'
+
+    def getVersion(self, agent):
+        return agent.split('Android')[-1].split(';')[0].strip()
+
+
+class iPhone(Dist):
+    look_for = 'iPhone'
+
+    def getVersion(self, agent):
+        version_end_chars = ['like', ';', ')']
+        part = agent.split('CPU OS')[-1].strip()
+        for c in version_end_chars:
+            if c in part:
+                version = 'iOS ' + part.split(c)[0].strip()
+                break
+        return version.replace('_', '.')
+        
+class iPad(Dist):
+    look_for = 'iPad'
+
+    def getVersion(self, agent):
+        version_end_chars = ['like', ';', ')']
+        part = agent.split('CPU OS')[-1].strip()
+        for c in version_end_chars:
+            if c in part:
+                version = 'iOS ' + part.split(c)[0].strip()
+                break
+        return version.replace('_', '.')
+
+detectorshub = DetectorsHub()
+
+def detect(agent):
+    result = Storage()
+    prefs = Storage()
+    _suggested_detectors = []
+    for info_type in detectorshub:
+        if not _suggested_detectors:
+            detectors = detectorshub[info_type]
+            _d_prefs = prefs.get(info_type, [])
+            detectors = detectorshub.reorderByPrefs(detectors, _d_prefs)
+            if "detector" in locals():
+                detector._suggested_detectors = detectors
+        else:
+            detectors = _suggested_detectors
+        for detector in detectors:
+            print "detector name: ", detector.name
+            if detector.detect(agent, result):
+                prefs = detector.prefs
+                _suggested_detectors = detector._suggested_detectors
+                break
+    return result
+
+
+class Result(Storage):
+    def __missing__(self, k):
+        return ""
+
+
+def detect(agent):
+    result = Result()
+    _suggested_detectors = []
+    for info_type in detectorshub:
+        detectors = _suggested_detectors or detectorshub[info_type]
+        for detector in detectors:
+            if detector.detect(agent, result):
+                if detector.prefs and not detector._suggested_detectors:
+                    _suggested_detectors = detectorshub.reorderByPrefs(
+                        detectors, detector.prefs.get(info_type))
+                    detector._suggested_detectors = _suggested_detectors
+                    break
+    return result
+
+
+def simple_detect(agent):
+    """
+    -> (os, browser) # tuple of strings
+    """
+    result = detect(agent)
+    os_list = []
+    if 'flavor' in result: os_list.append(result['flavor']['name'])
+    if 'dist' in result: os_list.append(result['dist']['name'])
+    if 'os' in result: os_list.append(result['os']['name'])
+
+    os = os_list and " ".join(os_list) or "Unknown OS"
+    os_version = os_list and (result['flavor'] and result['flavor'].get(
+            'version')) or (result['dist'] and result['dist'].get('version')) \
+            or (result['os'] and result['os'].get('version')) or ""
+    browser = 'browser' in result and result['browser']['name'] \
+        or 'Unknown Browser'
+    browser_version = 'browser' in result \
+        and result['browser'].get('version') or ""
+    if browser_version:
+        browser = " ".join((browser, browser_version))
+    if os_version:
+        os = " ".join((os, os_version))
+    return os, browser
+
+
+if __name__ == '__main__':
+    import time
+    import unittest
+
+    data = (
+        ("Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.5; en-GB; rv:1.9.0.10) Gecko/2009042315 Firefox/3.0.10",
+         ('MacOS Macintosh X 10.5', 'Firefox 3.0.10'),
+         {'flavor': {'version': 'X 10.5', 'name': 'MacOS'}, 'os': {'name': 'Macintosh'}, 'browser': {'version': '3.0.10', 'name': 'Firefox'}},),
+        ("Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_6) AppleWebKit/534.24 (KHTML, like Gecko) Chrome/11.0.696.3 Safari/534.24,gzip(gfe)",
+         ('MacOS Macintosh X 10.6.6', 'Chrome 11.0.696.3'),
+         {'flavor': {'version': 'X 10.6.6', 'name': 'MacOS'}, 'os': {'name': 'Macintosh'}, 'browser': {'version': '11.0.696.3', 'name': 'Chrome'}},),
+        ("Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.2) Gecko/20100308 Ubuntu/10.04 (lucid) Firefox/3.6 GTB7.1",
+         ('Ubuntu Linux 10.04', 'Firefox 3.6'),
+         {'dist': {'version': '10.04', 'name': 'Ubuntu'}, 'os': {'name': 'Linux'}, 'browser': {'version': '3.6', 'name': 'Firefox'}},),
+        ("Mozilla/5.0 (Linux; U; Android 2.2.1; fr-ch; A43 Build/FROYO) AppleWebKit/533.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1",
+         ('Android Linux 2.2.1', 'Safari 4.0'),
+         {'dist': {'version': '2.2.1', 'name': 'Android'}, 'os': {'name': 'Linux'}, 'browser': {'version': '4.0', 'name': 'Safari'}},),
+        ("Mozilla/5.0 (iPhone; U; CPU like Mac OS X; en) AppleWebKit/420+ (KHTML, like Gecko) Version/3.0 Mobile/1A543a Safari/419.3",
+         ('MacOS IPhone X', 'Safari 3.0'),
+         {'flavor': {'version': 'X', 'name': 'MacOS'}, 'dist': {'version': 'X', 'name': 'IPhone'}, 'browser': {'version': '3.0', 'name': 'Safari'}},),
+        ("Mozilla/5.0 (X11; CrOS i686 0.0.0) AppleWebKit/534.24 (KHTML, like Gecko) Chrome/11.0.696.27 Safari/534.24,gzip(gfe)",
+         ('ChromeOS 0.0.0', 'Chrome 11.0.696.27'),
+         {'os': {'name': 'ChromeOS', 'version': '0.0.0'}, 'browser': {'name': 'Chrome', 'version': '11.0.696.27'}},),
+        ("Mozilla/4.0 (compatible; MSIE 6.0; MSIE 5.5; Windows NT 5.1) Opera 7.02 [en]",
+         ('Windows NT 5.1', 'Opera 7.02'),
+         {'os': {'name': 'Windows', 'version': 'NT 5.1'}, 'browser': {'name': 'Opera', 'version': '7.02'}},),
+        ("Opera/9.80 (X11; Linux i686; U; en) Presto/2.9.168 Version/11.50",
+         ("Linux", "Opera 9.80"),
+         {"os": {"name": "Linux"}, "browser": {"name": "Opera", "version": "9.80"}},),
+        ("Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.7.5) Gecko/20060127 Netscape/8.1",
+         ("Windows NT 5.1", "Netscape 8.1"),
+         {'os': {'name': 'Windows', 'version': 'NT 5.1'}, 'browser': {'name': 'Netscape', 'version': '8.1'}},),
+        )
+    
+    class TestHAP(unittest.TestCase):
+        def setUp(self):
+            self.harass_repeat = 1000
+            self.data = data
+
+        def test_simple_detect(self):
+            for agent, simple_res, res in data:
+                self.assertEqual(simple_detect(agent), simple_res)
+
+        def test_detect(self):
+            for agent, simple_res, res in data:
+                self.assertEqual(detect(agent), res)
+
+        def test_harass(self):
+            then = time.time()
+            for agent, simple_res, res in data * self.harass_repeat:
+                detect(agent)
+            time_taken = time.time() - then
+            no_of_tests = len(self.data) * self.harass_repeat
+            print "\nTime taken for %s detecttions: %s" \
+                % (no_of_tests, time_taken)
+            print "Time taken for single detecttion: ", \
+                time_taken / (len(self.data) * self.harass_repeat)
+
+    unittest.main()
+

ADDED   gluon/custom_import.py
Index: gluon/custom_import.py
==================================================================
--- /dev/null
+++ gluon/custom_import.py
@@ -0,0 +1,311 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+import __builtin__
+import os
+import re
+import sys
+import threading
+
+# Install the new import function:
+def custom_import_install(web2py_path):
+        global _web2py_importer
+        global _web2py_path
+        if _web2py_importer:
+            return  # Already installed
+        _web2py_path = web2py_path
+        _web2py_importer = _Web2pyImporter(web2py_path)
+        __builtin__.__import__ = _web2py_importer
+
+def is_tracking_changes():
+    """
+    @return: True: neo_importer is tracking changes made to Python source
+    files. False: neo_import does not reload Python modules.
+    """
+
+    global _is_tracking_changes
+    return _is_tracking_changes
+
+def track_changes(track=True):
+    """
+    Tell neo_importer to start/stop tracking changes made to Python modules.
+    @param track: True: Start tracking changes. False: Stop tracking changes.
+    """
+
+    global _is_tracking_changes
+    global _web2py_importer
+    global _web2py_date_tracker_importer
+    assert track is True or track is False, "Boolean expected."
+    if track == _is_tracking_changes:
+        return
+    if track:
+        if not _web2py_date_tracker_importer:
+            _web2py_date_tracker_importer = \
+              _Web2pyDateTrackerImporter(_web2py_path)
+        __builtin__.__import__ = _web2py_date_tracker_importer
+    else:
+        __builtin__.__import__ = _web2py_importer
+    _is_tracking_changes = track
+
+_STANDARD_PYTHON_IMPORTER = __builtin__.__import__ # Keep standard importer
+_web2py_importer = None # The standard web2py importer
+_web2py_date_tracker_importer = None # The web2py importer with date tracking
+_web2py_path = None # Absolute path of the web2py directory
+
+_is_tracking_changes = False # The tracking mode
+
+class _BaseImporter(object):
+    """
+    The base importer. Dispatch the import the call to the standard Python
+    importer.
+    """
+
+    def begin(self):
+        """
+        Many imports can be made for a single import statement. This method
+        help the management of this aspect.
+        """
+
+    def __call__(self, name, globals={}, locals={}, fromlist=[], level=-1):
+        """
+        The import method itself.
+        """
+        return _STANDARD_PYTHON_IMPORTER(name, globals, locals, fromlist,
+                                         level)
+
+    def end(self):
+        """
+        Needed for clean up.
+        """
+
+
+class _DateTrackerImporter(_BaseImporter):
+    """
+    An importer tracking the date of the module files and reloading them when
+    they have changed.
+    """
+
+    _PACKAGE_PATH_SUFFIX = os.path.sep+"__init__.py"
+
+    def __init__(self):
+        super(_DateTrackerImporter, self).__init__()
+        self._import_dates = {} # Import dates of the files of the modules
+        # Avoid reloading cause by file modifications of reload:
+        self._tl = threading.local()
+        self._tl._modules_loaded = None
+
+    def begin(self):
+        self._tl._modules_loaded = set()
+
+    def __call__(self, name, globals={}, locals={}, fromlist=[], level=-1):
+        """
+        The import method itself.
+        """
+
+        call_begin_end = self._tl._modules_loaded == None
+        if call_begin_end:
+            self.begin()
+
+	try:
+            self._tl.globals = globals
+            self._tl.locals = locals
+            self._tl.level = level
+
+            # Check the date and reload if needed:
+            self._update_dates(name, fromlist)
+
+            # Try to load the module and update the dates if it works:
+            result = super(_DateTrackerImporter, self) \
+              .__call__(name, globals, locals, fromlist, level)
+            # Module maybe loaded for the 1st time so we need to set the date
+            self._update_dates(name, fromlist)
+            return result
+        except Exception, e:
+            raise e  # Don't hide something that went wrong
+        finally:
+            if call_begin_end:
+                self.end()
+
+    def _update_dates(self, name, fromlist):
+        """
+        Update all the dates associated to the statement import. A single
+        import statement may import many modules.
+        """
+
+        self._reload_check(name)
+        if fromlist:
+            for fromlist_name in fromlist:
+                self._reload_check("%s.%s" % (name, fromlist_name))
+
+    def _reload_check(self, name):
+        """
+        Update the date associated to the module and reload the module if
+        the file has changed.
+        """
+
+        module = sys.modules.get(name)
+        file = self._get_module_file(module)
+        if file:
+            date = self._import_dates.get(file)
+            new_date = None
+            reload_mod = False
+            mod_to_pack = False # Module turning into a package? (special case)
+            try:
+                new_date = os.path.getmtime(file)
+            except:
+                self._import_dates.pop(file, None)  # Clean up
+                # Handle module changing in package and
+                #package changing in module:
+                if file.endswith(".py"):
+                    # Get path without file ext:
+                    file = os.path.splitext(file)[0]
+                    reload_mod = os.path.isdir(file) \
+                      and os.path.isfile(file+self._PACKAGE_PATH_SUFFIX)
+                    mod_to_pack = reload_mod
+                else: # Package turning into module?
+                    file += ".py"
+                    reload_mod = os.path.isfile(file)
+                if reload_mod:
+                    new_date = os.path.getmtime(file) # Refresh file date
+            if reload_mod or not date or new_date > date:
+                self._import_dates[file] = new_date
+            if reload_mod or (date and new_date > date):
+                if module not in self._tl._modules_loaded:
+                    if mod_to_pack:
+                        # Module turning into a package:
+                        mod_name = module.__name__
+                        del sys.modules[mod_name] # Delete the module
+                        # Reload the module:
+                        super(_DateTrackerImporter, self).__call__ \
+                          (mod_name, self._tl.globals, self._tl.locals, [],
+                           self._tl.level)
+                    else:
+                        reload(module)
+                        self._tl._modules_loaded.add(module)
+
+    def end(self):
+        self._tl._modules_loaded = None
+
+    @classmethod
+    def _get_module_file(cls, module):
+        """
+        Get the absolute path file associated to the module or None.
+        """
+
+        file = getattr(module, "__file__", None)
+        if file:
+            # Make path absolute if not:
+            #file = os.path.join(cls.web2py_path, file)
+
+            file = os.path.splitext(file)[0]+".py" # Change .pyc for .py
+            if file.endswith(cls._PACKAGE_PATH_SUFFIX):
+                file = os.path.dirname(file)  # Track dir for packages
+        return file
+
+class _Web2pyImporter(_BaseImporter):
+    """
+    The standard web2py importer. Like the standard Python importer but it
+    tries to transform import statements as something like
+    "import applications.app_name.modules.x". If the import failed, fall back
+    on _BaseImporter.
+    """
+
+    _RE_ESCAPED_PATH_SEP = re.escape(os.path.sep)  # os.path.sep escaped for re
+
+    def __init__(self, web2py_path):
+        """
+        @param web2py_path: The absolute path of the web2py installation.
+        """
+
+        global DEBUG
+        super(_Web2pyImporter, self).__init__()
+        self.web2py_path =  web2py_path
+        self.__web2py_path_os_path_sep = self.web2py_path+os.path.sep
+        self.__web2py_path_os_path_sep_len = len(self.__web2py_path_os_path_sep)
+        self.__RE_APP_DIR = re.compile(
+          self._RE_ESCAPED_PATH_SEP.join( \
+          ( \
+            #"^" + re.escape(web2py_path),   # Not working with Python 2.5
+            "^(" + "applications",
+            "[^",
+            "]+)",
+            "",
+          ) ))
+
+    def _matchAppDir(self, file_path):
+        """
+        Does the file in a directory inside the "applications" directory?
+        """
+
+        if file_path.startswith(self.__web2py_path_os_path_sep):
+            file_path = file_path[self.__web2py_path_os_path_sep_len:]
+            return self.__RE_APP_DIR.match(file_path)
+        return False
+
+    def __call__(self, name, globals={}, locals={}, fromlist=[], level=-1):
+        """
+        The import method itself.
+        """
+
+        self.begin()
+        #try:
+        # if not relative and not from applications:
+        if not name.startswith(".") and level <= 0 \
+                    and not name.startswith("applications.") \
+                    and isinstance(globals, dict):
+            # Get the name of the file do the import
+            caller_file_name = os.path.join(self.web2py_path, \
+                                            globals.get("__file__", ""))
+            # Is the path in an application directory?
+            match_app_dir = self._matchAppDir(caller_file_name)
+            if match_app_dir:
+                try:
+                    # Get the prefix to add for the import
+                    # (like applications.app_name.modules):
+                    modules_prefix = \
+                        ".".join((match_app_dir.group(1). \
+                        replace(os.path.sep, "."), "modules"))
+                    if not fromlist:
+                        # import like "import x" or "import x.y"
+                        return self.__import__dot(modules_prefix, name,
+                            globals, locals, fromlist, level)
+                    else:
+                        # import like "from x import a, b, ..."
+                        return super(_Web2pyImporter, self) \
+                            .__call__(modules_prefix+"."+name,
+                                    globals, locals, fromlist, level)
+                except ImportError:
+                    pass
+        return super(_Web2pyImporter, self).__call__(name, globals, locals,
+                                                    fromlist, level)
+        #except Exception, e:
+        #    raise e  # Don't hide something that went wrong
+        #finally:
+        self.end()
+
+    def __import__dot(self, prefix, name, globals, locals, fromlist,
+                      level):
+        """
+        Here we will import x.y.z as many imports like:
+        from applications.app_name.modules import x
+        from applications.app_name.modules.x import y
+        from applications.app_name.modules.x.y import z.
+        x will be the module returned.
+        """
+
+        result = None
+        for name in name.split("."):
+            new_mod = super(_Web2pyImporter, self).__call__(prefix, globals,
+                                                        locals, [name], level)
+            try:
+                result = result or new_mod.__dict__[name]
+            except KeyError:
+                raise ImportError()
+            prefix += "." + name
+        return result
+
+class _Web2pyDateTrackerImporter(_Web2pyImporter, _DateTrackerImporter):
+    """
+    Like _Web2pyImporter but using a _DateTrackerImporter.
+    """
+

ADDED   gluon/dal.py
Index: gluon/dal.py
==================================================================
--- /dev/null
+++ gluon/dal.py
@@ -0,0 +1,6063 @@
+#!/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+Thanks to
+    * Niall Sweeny <niall.sweeny@fonjax.com> for MS SQL support
+    * Marcel Leuthi <mluethi@mlsystems.ch> for Oracle support
+    * Denes
+    * Chris Clark
+    * clach05
+    * Denes Lengyel
+    * and many others who have contributed to current and previous versions
+
+This file contains the DAL support for many relational databases,
+including:
+- SQLite
+- MySQL
+- Postgres
+- Oracle
+- MS SQL
+- DB2
+- Interbase
+- Ingres
+- SapDB (experimental)
+- Cubrid (experimental)
+- CouchDB (experimental)
+- MongoDB (in progress)
+- Google:nosql
+- Google:sql
+
+Example of usage:
+
+>>> # from dal import DAL, Field
+
+### create DAL connection (and create DB if not exists)
+>>> db=DAL(('mysql://a:b@locahost/x','sqlite://storage.sqlite'),folder=None)
+
+### define a table 'person' (create/aster as necessary)
+>>> person = db.define_table('person',Field('name','string'))
+
+### insert a record
+>>> id = person.insert(name='James')
+
+### retrieve it by id
+>>> james = person(id)
+
+### retrieve it by name
+>>> james = person(name='James')
+
+### retrieve it by arbitrary query
+>>> query = (person.name=='James')&(person.name.startswith('J'))
+>>> james = db(query).select(person.ALL)[0]
+
+### update one record
+>>> james.update_record(name='Jim')
+
+### update multiple records by query
+>>> db(person.name.like('J%')).update(name='James')
+1
+
+### delete records by query
+>>> db(person.name.lower()=='jim').delete()
+0
+
+### retrieve multiple records (rows)
+>>> people = db(person).select(orderby=person.name,groupby=person.name,limitby=(0,100))
+
+### further filter them
+>>> james = people.find(lambda row: row.name=='James').first()
+>>> print james.id, james.name
+1 James
+
+### check aggrgates
+>>> counter = person.id.count()
+>>> print db(person).select(counter).first()(counter)
+1
+
+### delete one record
+>>> james.delete_record()
+1
+
+### delete (drop) entire database table
+>>> person.drop()
+
+Supported field types:
+id string text boolean integer double decimal password upload blob time date datetime,
+
+Supported DAL URI strings:
+'sqlite://test.db'
+'sqlite:memory'
+'jdbc:sqlite://test.db'
+'mysql://root:none@localhost/test'
+'postgres://mdipierro:none@localhost/test'
+'jdbc:postgres://mdipierro:none@localhost/test'
+'mssql://web2py:none@A64X2/web2py_test'
+'mssql2://web2py:none@A64X2/web2py_test' # alternate mappings
+'oracle://username:password@database'
+'firebird://user:password@server:3050/database'
+'db2://DSN=dsn;UID=user;PWD=pass'
+'firebird://username:password@hostname/database'
+'firebird_embedded://username:password@c://path'
+'informix://user:password@server:3050/database'
+'informixu://user:password@server:3050/database' # unicode informix
+'google:datastore' # for google app engine datastore
+'google:sql' # for google app engine with sql (mysql compatible)
+'teradata://DSN=dsn;UID=user;PWD=pass' # experimental 
+
+For more info:
+help(DAL)
+help(Field)
+"""
+
+###################################################################################
+# this file orly exposes DAL and Field
+###################################################################################
+
+__all__ = ['DAL', 'Field']
+MAXCHARLENGTH = 512
+INFINITY = 2**15 # not quite but reasonable default max char length
+
+import re
+import sys
+import locale
+import os
+import types
+import cPickle
+import datetime
+import threading
+import time
+import cStringIO
+import csv
+import copy
+import socket
+import logging
+import copy_reg
+import base64
+import shutil
+import marshal
+import decimal
+import struct
+import urllib
+import hashlib
+import uuid
+import glob
+
+CALLABLETYPES = (types.LambdaType, types.FunctionType, types.BuiltinFunctionType,
+                 types.MethodType, types.BuiltinMethodType)
+
+
+###################################################################################
+# following checks allows running of dal without web2py as a standalone module
+###################################################################################
+try:
+    from utils import web2py_uuid
+except ImportError:
+    import uuid
+    def web2py_uuid(): return str(uuid.uuid4())
+
+try:
+    import portalocker
+    have_portalocker = True
+except ImportError:
+    have_portalocker = False
+
+try:
+    import serializers
+    have_serializers = True
+except ImportError:
+    have_serializers = False
+
+try:
+    import validators
+    have_validators = True
+except ImportError:
+    have_validators = False
+
+logger = logging.getLogger("web2py.dal")
+DEFAULT = lambda:0
+
+sql_locker = threading.RLock()
+thread = threading.local()
+
+# internal representation of tables with field
+#  <table>.<field>, tables and fields may only be [a-zA-Z0-0_]
+
+regex_dbname = re.compile('^(\w+)(\:\w+)*')
+table_field = re.compile('^[\w_]+\.[\w_]+$')
+regex_content = re.compile('(?P<table>[\w\-]+)\.(?P<field>[\w\-]+)\.(?P<uuidkey>[\w\-]+)\.(?P<name>\w+)\.\w+$')
+regex_cleanup_fn = re.compile('[\'"\s;]+')
+string_unpack=re.compile('(?<!\|)\|(?!\|)')
+regex_python_keywords = re.compile('^(and|del|from|not|while|as|elif|global|or|with|assert|else|if|pass|yield|break|except|import|print|class|exec|in|raise|continue|finally|is|return|def|for|lambda|try)$')
+
+
+
+# list of drivers will be built on the fly
+# and lists only what is available
+drivers = []
+
+try:
+    from new import classobj
+    from google.appengine.ext import db as gae
+    from google.appengine.api import namespace_manager, rdbms
+    from google.appengine.api.datastore_types import Key  ### needed for belongs on ID
+    from google.appengine.ext.db.polymodel import PolyModel
+    drivers.append('google')
+except ImportError:
+    pass
+
+if not 'google' in drivers:
+
+    try:
+        from pysqlite2 import dbapi2 as sqlite3
+        drivers.append('pysqlite2')
+    except ImportError:
+        try:
+            from sqlite3 import dbapi2 as sqlite3
+            drivers.append('SQLite3')
+        except ImportError:
+            logger.debug('no sqlite3 or pysqlite2.dbapi2 driver')
+
+    try:
+        import contrib.pymysql as pymysql
+        drivers.append('pymysql')
+    except ImportError:
+        logger.debug('no pymysql driver')
+
+    try:
+        import psycopg2
+        drivers.append('PostgreSQL')
+    except ImportError:
+        logger.debug('no psycopg2 driver')
+
+    try:
+        import cx_Oracle
+        drivers.append('Oracle')
+    except ImportError:
+        logger.debug('no cx_Oracle driver')
+
+    try:
+        import pyodbc
+        drivers.append('MSSQL/DB2')
+    except ImportError:
+        logger.debug('no MSSQL/DB2 driver')
+
+    try:
+        import kinterbasdb
+        drivers.append('Interbase')
+    except ImportError:
+        logger.debug('no kinterbasdb driver')
+
+    try:
+        import firebirdsql
+        drivers.append('Firebird')
+    except ImportError:
+        logger.debug('no Firebird driver')
+
+    try:
+        import informixdb
+        drivers.append('Informix')
+        logger.warning('Informix support is experimental')
+    except ImportError:
+        logger.debug('no informixdb driver')
+        
+    try:
+        import sapdb
+        drivers.append('SAPDB')
+        logger.warning('SAPDB support is experimental')
+    except ImportError:
+        logger.debug('no sapdb driver')
+
+    try:
+        import cubriddb
+        drivers.append('Cubrid')
+        logger.warning('Cubrid support is experimental')
+    except ImportError:
+        logger.debug('no cubriddb driver')
+
+    try:
+        from com.ziclix.python.sql import zxJDBC
+        import java.sql
+        # Try sqlite jdbc driver from http://www.zentus.com/sqlitejdbc/
+        from org.sqlite import JDBC # required by java.sql; ensure we have it
+        drivers.append('zxJDBC')
+        logger.warning('zxJDBC support is experimental')
+        is_jdbc = True
+    except ImportError:
+        logger.debug('no zxJDBC driver')
+        is_jdbc = False
+
+    try:
+        import ingresdbi
+        drivers.append('Ingres')
+    except ImportError:
+        logger.debug('no Ingres driver')
+    # NOTE could try JDBC.......
+
+    try:
+        import couchdb
+        drivers.append('CouchDB')
+    except ImportError:
+        logger.debug('no couchdb driver')
+
+    try:
+        import pymongo
+        drivers.append('mongoDB')
+    except:
+        logger.debug('no mongoDB driver')
+
+
+if 'google' in drivers:
+
+    is_jdbc = False
+
+    class GAEDecimalProperty(gae.Property):
+        """
+        GAE decimal implementation
+        """
+        data_type = decimal.Decimal
+
+        def __init__(self, precision, scale, **kwargs):
+            super(GAEDecimalProperty, self).__init__(self, **kwargs)
+            d = '1.'
+            for x in range(scale):
+                d += '0'
+            self.round = decimal.Decimal(d)
+
+        def get_value_for_datastore(self, model_instance):
+            value = super(GAEDecimalProperty, self).get_value_for_datastore(model_instance)
+            if value:
+                return str(value)
+            else:
+                return None
+
+        def make_value_from_datastore(self, value):
+            if value:
+                return decimal.Decimal(value).quantize(self.round)
+            else:
+                return None
+
+        def validate(self, value):
+            value = super(GAEDecimalProperty, self).validate(value)
+            if value is None or isinstance(value, decimal.Decimal):
+                return value
+            elif isinstance(value, basestring):
+                return decimal.Decimal(value)
+            raise gae.BadValueError("Property %s must be a Decimal or string." % self.name)
+
+###################################################################################
+# class that handles connection pooling (all adapters derived form this one)
+###################################################################################
+
+class ConnectionPool(object):
+
+    pools = {}
+
+    @staticmethod
+    def set_folder(folder):
+        thread.folder = folder
+
+    # ## this allows gluon to commit/rollback all dbs in this thread
+
+    @staticmethod
+    def close_all_instances(action):
+        """ to close cleanly databases in a multithreaded environment """
+        if not hasattr(thread,'instances'):
+            return
+        while thread.instances:
+            instance = thread.instances.pop()
+            getattr(instance,action)()
+            # ## if you want pools, recycle this connection
+            really = True
+            if instance.pool_size:
+                sql_locker.acquire()
+                pool = ConnectionPool.pools[instance.uri]
+                if len(pool) < instance.pool_size:
+                    pool.append(instance.connection)
+                    really = False
+                sql_locker.release()
+            if really:
+                getattr(instance,'close')()
+        return
+
+    def find_or_make_work_folder(self):
+        """ this actually does not make the folder. it has to be there """
+        if hasattr(thread,'folder'):
+            self.folder = thread.folder
+        else:
+            self.folder = thread.folder = ''
+
+        # Creating the folder if it does not exist
+        if False and self.folder and not os.path.exists(self.folder):
+            os.mkdir(self.folder)
+
+    def pool_connection(self, f):
+        if not self.pool_size:
+            self.connection = f()
+        else:
+            uri = self.uri
+            sql_locker.acquire()
+            if not uri in ConnectionPool.pools:
+                ConnectionPool.pools[uri] = []
+            if ConnectionPool.pools[uri]:
+                self.connection = ConnectionPool.pools[uri].pop()
+                sql_locker.release()
+            else:
+                sql_locker.release()
+                self.connection = f()
+        if not hasattr(thread,'instances'):
+            thread.instances = []
+        thread.instances.append(self)
+
+
+###################################################################################
+# this is a generic adapter that does nothing; all others are derived form this one
+###################################################################################
+
+class BaseAdapter(ConnectionPool):
+
+    driver = None
+    maxcharlength = INFINITY
+    commit_on_alter_table = False
+    support_distributed_transaction = False
+    uploads_in_blob = False
+    types = {
+        'boolean': 'CHAR(1)',
+        'string': 'CHAR(%(length)s)',
+        'text': 'TEXT',
+        'password': 'CHAR(%(length)s)',
+        'blob': 'BLOB',
+        'upload': 'CHAR(%(length)s)',
+        'integer': 'INTEGER',
+        'double': 'DOUBLE',
+        'decimal': 'DOUBLE',
+        'date': 'DATE',
+        'time': 'TIME',
+        'datetime': 'TIMESTAMP',
+        'id': 'INTEGER PRIMARY KEY AUTOINCREMENT',
+        'reference': 'INTEGER REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s',
+        'list:integer': 'TEXT',
+        'list:string': 'TEXT',
+        'list:reference': 'TEXT',
+        }
+
+    def integrity_error(self):
+        return self.driver.IntegrityError
+
+    def file_exists(self, filename):
+        """
+        to be used ONLY for files that on GAE may not be on filesystem
+        """
+        return os.path.exists(filename)
+
+    def file_open(self, filename, mode='rb', lock=True):
+        """
+        to be used ONLY for files that on GAE may not be on filesystem
+        """
+        fileobj = open(filename,mode)
+        if have_portalocker and lock:
+            if mode in ('r','rb'):
+                portalocker.lock(fileobj,portalocker.LOCK_SH)
+            elif mode in ('w','wb','a'):
+                portalocker.lock(fileobj,portalocker.LOCK_EX)
+            else:
+                fileobj.close()
+                raise RuntimeError, "Unsupported file_open mode"
+        return fileobj
+
+    def file_close(self, fileobj, unlock=True):
+        """
+        to be used ONLY for files that on GAE may not be on filesystem
+        """
+        if fileobj:
+            if have_portalocker and unlock:
+                portalocker.unlock(fileobj)
+            fileobj.close()
+
+    def file_delete(self, filename):
+        os.unlink(filename)
+
+    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8',
+                 credential_decoder=lambda x:x, driver_args={},
+                 adapter_args={}):
+        self.db = db
+        self.dbengine = "None"
+        self.uri = uri
+        self.pool_size = pool_size
+        self.folder = folder
+        self.db_codec = db_codec
+        class Dummy(object):
+            lastrowid = 1
+            def __getattr__(self, value):
+                return lambda *a, **b: []
+        self.connection = Dummy()
+        self.cursor = Dummy()
+
+    def sequence_name(self,tablename):
+        return '%s_sequence' % tablename
+
+    def trigger_name(self,tablename):
+        return '%s_sequence' % tablename
+
+
+    def create_table(self, table, migrate=True, fake_migrate=False, polymodel=None):
+        fields = []
+        sql_fields = {}
+        sql_fields_aux = {}
+        TFK = {}
+        tablename = table._tablename
+        sortable = 0
+        for field in table:
+            sortable += 1
+            k = field.name
+            if isinstance(field.type,SQLCustomType):
+                ftype = field.type.native or field.type.type
+            elif field.type.startswith('reference'):
+                referenced = field.type[10:].strip()
+                constraint_name = self.constraint_name(tablename, field.name)
+                if hasattr(table,'_primarykey'):
+                    rtablename,rfieldname = referenced.split('.')
+                    rtable = table._db[rtablename]
+                    rfield = rtable[rfieldname]
+                    # must be PK reference or unique
+                    if rfieldname in rtable._primarykey or rfield.unique:
+                        ftype = self.types[rfield.type[:9]] % dict(length=rfield.length)
+                        # multicolumn primary key reference?
+                        if not rfield.unique and len(rtable._primarykey)>1 :
+                            # then it has to be a table level FK
+                            if rtablename not in TFK:
+                                TFK[rtablename] = {}
+                            TFK[rtablename][rfieldname] = field.name
+                        else:
+                            ftype = ftype + \
+                                self.types['reference FK'] %dict(\
+                                constraint_name=constraint_name,
+                                table_name=tablename,
+                                field_name=field.name,
+                                foreign_key='%s (%s)'%(rtablename, rfieldname),
+                                on_delete_action=field.ondelete)
+                else:
+                    # make a guess here for circular references
+                    id_fieldname = referenced in table._db and table._db[referenced]._id.name or 'id'
+                    ftype = self.types[field.type[:9]]\
+                        % dict(table_name=tablename,
+                               field_name=field.name,
+                               constraint_name=constraint_name,
+                               foreign_key=referenced + ('(%s)' % id_fieldname),
+                               on_delete_action=field.ondelete)
+            elif field.type.startswith('list:reference'):
+                ftype = self.types[field.type[:14]]
+            elif field.type.startswith('decimal'):
+                precision, scale = map(int,field.type[8:-1].split(','))
+                ftype = self.types[field.type[:7]] % \
+                    dict(precision=precision,scale=scale)
+            elif not field.type in self.types:
+                raise SyntaxError, 'Field: unknown field type: %s for %s' % \
+                    (field.type, field.name)
+            else:
+                ftype = self.types[field.type]\
+                     % dict(length=field.length)
+            if not field.type.startswith('id') and not field.type.startswith('reference'):
+                if field.notnull:
+                    ftype += ' NOT NULL'
+                else:
+                    ftype += self.ALLOW_NULL()
+                if field.unique:
+                    ftype += ' UNIQUE'
+
+            # add to list of fields
+            sql_fields[field.name] = dict(sortable=sortable,
+                                          type=str(field.type),
+                                          sql=ftype)
+
+            if isinstance(field.default,(str,int,float)):
+                # caveat: sql_fields and sql_fields_aux differ for default values
+                # sql_fields is used to trigger migrations and sql_fields_aux
+                # are used for create table
+                # the reason is that we do not want to trigger a migration simply
+                # because a default value changes
+                not_null = self.NOT_NULL(field.default,field.type)
+                ftype = ftype.replace('NOT NULL',not_null)
+            sql_fields_aux[field.name] = dict(sql=ftype)
+
+            fields.append('%s %s' % (field.name, ftype))
+        other = ';'
+
+        # backend-specific extensions to fields
+        if self.dbengine == 'mysql':
+            if not hasattr(table, "_primarykey"):
+                fields.append('PRIMARY KEY(%s)' % table._id.name)
+            other = ' ENGINE=InnoDB CHARACTER SET utf8;'
+
+        fields = ',\n    '.join(fields)
+        for rtablename in TFK:
+            rfields = TFK[rtablename]
+            pkeys = table._db[rtablename]._primarykey
+            fkeys = [ rfields[k] for k in pkeys ]
+            fields = fields + ',\n    ' + \
+                     self.types['reference TFK'] %\
+                     dict(table_name=tablename,
+                     field_name=', '.join(fkeys),
+                     foreign_table=rtablename,
+                     foreign_key=', '.join(pkeys),
+                     on_delete_action=field.ondelete)
+
+        if hasattr(table,'_primarykey'):
+            query = '''CREATE TABLE %s(\n    %s,\n    %s) %s''' % \
+                (tablename, fields, self.PRIMARY_KEY(', '.join(table._primarykey)),other)
+        else:
+            query = '''CREATE TABLE %s(\n    %s\n)%s''' % \
+                (tablename, fields, other)
+
+        if self.uri.startswith('sqlite:///'):
+            path_encoding = sys.getfilesystemencoding() or locale.getdefaultlocale()[1] or 'utf8'
+            dbpath = self.uri[9:self.uri.rfind('/')].decode('utf8').encode(path_encoding)
+        else:
+            dbpath = self.folder
+
+        if not migrate:
+            return query
+        elif self.uri.startswith('sqlite:memory'):
+            table._dbt = None
+        elif isinstance(migrate, str):
+            table._dbt = os.path.join(dbpath, migrate)
+        else:
+            table._dbt = os.path.join(dbpath, '%s_%s.table' \
+                                          % (table._db._uri_hash, tablename))
+        if table._dbt:
+            table._loggername = os.path.join(dbpath, 'sql.log')
+            logfile = self.file_open(table._loggername, 'a')
+        else:
+            logfile = None
+        if not table._dbt or not self.file_exists(table._dbt):
+            if table._dbt:
+                logfile.write('timestamp: %s\n'
+                               % datetime.datetime.today().isoformat())
+                logfile.write(query + '\n')
+            if not fake_migrate:
+                self.create_sequence_and_triggers(query,table)
+                table._db.commit()
+            if table._dbt:
+                tfile = self.file_open(table._dbt, 'w')
+                cPickle.dump(sql_fields, tfile)
+                self.file_close(tfile)
+                if fake_migrate:
+                    logfile.write('faked!\n')
+                else:
+                    logfile.write('success!\n')
+        else:
+            tfile = self.file_open(table._dbt, 'r')
+            try:
+                sql_fields_old = cPickle.load(tfile)
+            except EOFError:
+                self.file_close(tfile)
+                self.file_close(logfile)
+                raise RuntimeError, 'File %s appears corrupted' % table._dbt
+            self.file_close(tfile)
+            if sql_fields != sql_fields_old:
+                self.migrate_table(table,
+                                   sql_fields, sql_fields_old,
+                                   sql_fields_aux, logfile,
+                                   fake_migrate=fake_migrate)
+        self.file_close(logfile)
+        return query
+
+    def migrate_table(
+        self,
+        table,
+        sql_fields,
+        sql_fields_old,
+        sql_fields_aux,
+        logfile,
+        fake_migrate=False,
+        ):
+        tablename = table._tablename
+        def fix(item):
+            k,v=item
+            if not isinstance(v,dict):
+                v=dict(type='unkown',sql=v)
+            return k.lower(),v
+        ### make sure all field names are lower case to avoid conflicts
+        sql_fields = dict(map(fix,sql_fields.items()))
+        sql_fields_old = dict(map(fix,sql_fields_old.items()))
+        sql_fields_aux = dict(map(fix,sql_fields_aux.items()))
+
+        keys = sql_fields.keys()
+        for key in sql_fields_old:
+            if not key in keys:
+                keys.append(key)
+        if self.dbengine == 'mssql':
+            new_add = '; ALTER TABLE %s ADD ' % tablename
+        else:
+            new_add = ', ADD '
+
+        metadata_change = False
+        sql_fields_current = copy.copy(sql_fields_old)
+        for key in keys:
+            query = None
+            if not key in sql_fields_old:
+                sql_fields_current[key] = sql_fields[key]
+                query = ['ALTER TABLE %s ADD %s %s;' % \
+                         (tablename, key,
+                          sql_fields_aux[key]['sql'].replace(', ', new_add))]
+                metadata_change = True
+            elif self.dbengine == 'sqlite':
+                if key in sql_fields:
+                    sql_fields_current[key] = sql_fields[key]
+                metadata_change = True
+            elif not key in sql_fields:
+                del sql_fields_current[key]
+                if not self.dbengine in ('firebird',):
+                    query = ['ALTER TABLE %s DROP COLUMN %s;' % (tablename, key)]
+                else:
+                    query = ['ALTER TABLE %s DROP %s;' % (tablename, key)]
+                metadata_change = True
+            elif sql_fields[key]['sql'] != sql_fields_old[key]['sql'] \
+                  and not isinstance(table[key].type, SQLCustomType) \
+                  and not (table[key].type.startswith('reference') and \
+                      sql_fields[key]['sql'].startswith('INT,') and \
+                      sql_fields_old[key]['sql'].startswith('INT NOT NULL,')):
+                sql_fields_current[key] = sql_fields[key]
+                t = tablename
+                tt = sql_fields_aux[key]['sql'].replace(', ', new_add)
+                if not self.dbengine in ('firebird',):
+                    query = ['ALTER TABLE %s ADD %s__tmp %s;' % (t, key, tt),
+                             'UPDATE %s SET %s__tmp=%s;' % (t, key, key),
+                             'ALTER TABLE %s DROP COLUMN %s;' % (t, key),
+                             'ALTER TABLE %s ADD %s %s;' % (t, key, tt),
+                             'UPDATE %s SET %s=%s__tmp;' % (t, key, key),
+                             'ALTER TABLE %s DROP COLUMN %s__tmp;' % (t, key)]
+                else:
+                    query = ['ALTER TABLE %s ADD %s__tmp %s;' % (t, key, tt),
+                             'UPDATE %s SET %s__tmp=%s;' % (t, key, key),
+                             'ALTER TABLE %s DROP %s;' % (t, key),
+                             'ALTER TABLE %s ADD %s %s;' % (t, key, tt),
+                             'UPDATE %s SET %s=%s__tmp;' % (t, key, key),
+                             'ALTER TABLE %s DROP %s__tmp;' % (t, key)]
+                metadata_change = True
+            elif sql_fields[key]['type'] != sql_fields_old[key]['type']:
+                sql_fields_current[key] = sql_fields[key]
+                metadata_change = True
+
+            if query:
+                logfile.write('timestamp: %s\n'
+                              % datetime.datetime.today().isoformat())
+                table._db['_lastsql'] = '\n'.join(query)
+                for sub_query in query:
+                    logfile.write(sub_query + '\n')
+                    if not fake_migrate:
+                        self.execute(sub_query)
+                        # caveat. mysql, oracle and firebird do not allow multiple alter table
+                        # in one transaction so we must commit partial transactions and
+                        # update table._dbt after alter table.
+                        if table._db._adapter.commit_on_alter_table:
+                            table._db.commit()
+                            tfile = self.file_open(table._dbt, 'w')
+                            cPickle.dump(sql_fields_current, tfile)
+                            self.file_close(tfile)
+                            logfile.write('success!\n')
+                    else:
+                        logfile.write('faked!\n')
+            elif metadata_change:
+                tfile = self.file_open(table._dbt, 'w')
+                cPickle.dump(sql_fields_current, tfile)
+                self.file_close(tfile)
+
+        if metadata_change and \
+                not (query and self.dbengine in ('mysql','oracle','firebird')):
+            table._db.commit()
+            tfile = self.file_open(table._dbt, 'w')
+            cPickle.dump(sql_fields_current, tfile)
+            self.file_close(tfile)
+
+    def LOWER(self,first):
+        return 'LOWER(%s)' % self.expand(first)
+
+    def UPPER(self,first):
+        return 'UPPER(%s)' % self.expand(first)
+
+    def EXTRACT(self,first,what):
+        return "EXTRACT(%s FROM %s)" % (what, self.expand(first))
+
+    def AGGREGATE(self,first,what):
+        return "%s(%s)" % (what,self.expand(first))
+
+    def JOIN(self):
+        return 'JOIN'
+
+    def LEFT_JOIN(self):
+        return 'LEFT JOIN'
+
+    def RANDOM(self):
+        return 'Random()'
+
+    def NOT_NULL(self,default,field_type):
+        return 'NOT NULL DEFAULT %s' % self.represent(default,field_type)
+
+    def COALESCE_ZERO(self,first):
+        return 'COALESCE(%s,0)' % self.expand(first)
+
+    def ALLOW_NULL(self):
+        return ''
+
+    def SUBSTRING(self,field,parameters):
+        return 'SUBSTR(%s,%s,%s)' % (self.expand(field), parameters[0], parameters[1])
+
+    def PRIMARY_KEY(self,key):
+        return 'PRIMARY KEY(%s)' % key
+
+    def _drop(self,table,mode):
+        return ['DROP TABLE %s;' % table]
+
+    def drop(self, table, mode=''):
+        if table._dbt:
+            logfile = self.file_open(table._loggername, 'a')
+        queries = self._drop(table, mode)
+        for query in queries:
+            if table._dbt:
+                logfile.write(query + '\n')
+            self.execute(query)
+        table._db.commit()
+        del table._db[table._tablename]
+        del table._db.tables[table._db.tables.index(table._tablename)]
+        table._db._update_referenced_by(table._tablename)
+        if table._dbt:
+            self.file_delete(table._dbt)
+            logfile.write('success!\n')
+
+    def _insert(self,table,fields):
+        keys = ','.join(f.name for f,v in fields)
+        values = ','.join(self.expand(v,f.type) for f,v in fields)
+        return 'INSERT INTO %s(%s) VALUES (%s);' % (table, keys, values)
+
+    def insert(self,table,fields):
+        query = self._insert(table,fields)
+        try:
+            self.execute(query)
+        except Exception, e:
+            if isinstance(e,self.integrity_error_class()):
+                return None
+            raise e
+        if hasattr(table,'_primarykey'):
+            return dict([(k[0].name, k[1]) for k in fields \
+                             if k[0].name in table._primarykey])
+        id = self.lastrowid(table)
+        if not isinstance(id,int):
+            return id
+        rid = Reference(id)
+        (rid._table, rid._record) = (table, None)
+        return rid
+
+    def bulk_insert(self,table,items):
+        return [self.insert(table,item) for item in items]
+
+    def NOT(self,first):
+        return '(NOT %s)' % self.expand(first)
+
+    def AND(self,first,second):
+        return '(%s AND %s)' % (self.expand(first),self.expand(second))
+
+    def OR(self,first,second):
+        return '(%s OR %s)' % (self.expand(first),self.expand(second))
+
+    def BELONGS(self,first,second):
+        if isinstance(second,str):
+            return '(%s IN (%s))' % (self.expand(first),second[:-1])
+        elif second==[] or second==():
+            return '(0)'
+        items =','.join(self.expand(item,first.type) for item in second)
+        return '(%s IN (%s))' % (self.expand(first),items)
+
+    def LIKE(self,first,second):
+        return '(%s LIKE %s)' % (self.expand(first),self.expand(second,'string'))
+
+    def STARTSWITH(self,first,second):
+        return '(%s LIKE %s)' % (self.expand(first),self.expand(second+'%','string'))
+
+    def ENDSWITH(self,first,second):
+        return '(%s LIKE %s)' % (self.expand(first),self.expand('%'+second,'string'))
+
+    def CONTAINS(self,first,second):
+        if first.type in ('string','text'):
+            key = '%'+str(second).replace('%','%%')+'%'
+        elif first.type.startswith('list:'):
+            key = '%|'+str(second).replace('|','||').replace('%','%%')+'|%'
+        return '(%s LIKE %s)' % (self.expand(first),self.expand(key,'string'))
+
+    def EQ(self,first,second=None):
+        if second is None:
+            return '(%s IS NULL)' % self.expand(first)
+        return '(%s = %s)' % (self.expand(first),self.expand(second,first.type))
+
+    def NE(self,first,second=None):
+        if second is None:
+            return '(%s IS NOT NULL)' % self.expand(first)
+        return '(%s <> %s)' % (self.expand(first),self.expand(second,first.type))
+
+    def LT(self,first,second=None):
+        return '(%s < %s)' % (self.expand(first),self.expand(second,first.type))
+
+    def LE(self,first,second=None):
+        return '(%s <= %s)' % (self.expand(first),self.expand(second,first.type))
+
+    def GT(self,first,second=None):
+        return '(%s > %s)' % (self.expand(first),self.expand(second,first.type))
+
+    def GE(self,first,second=None):
+        return '(%s >= %s)' % (self.expand(first),self.expand(second,first.type))
+
+    def ADD(self,first,second):
+        return '(%s + %s)' % (self.expand(first),self.expand(second,first.type))
+
+    def SUB(self,first,second):
+        return '(%s - %s)' % (self.expand(first),self.expand(second,first.type))
+
+    def MUL(self,first,second):
+        return '(%s * %s)' % (self.expand(first),self.expand(second,first.type))
+
+    def DIV(self,first,second):
+        return '(%s / %s)' % (self.expand(first),self.expand(second,first.type))
+
+    def MOD(self,first,second):
+        return '(%s %% %s)' % (self.expand(first),self.expand(second,first.type))
+
+    def AS(self,first,second):
+        return '%s AS %s' % (self.expand(first),second)
+
+    def ON(self,first,second):
+        return '%s ON %s' % (self.expand(first),self.expand(second))
+
+    def INVERT(self,first):
+        return '%s DESC' % self.expand(first)
+
+    def COMMA(self,first,second):
+        return '%s, %s' % (self.expand(first),self.expand(second))
+
+    def expand(self,expression,field_type=None):
+        if isinstance(expression,Field):
+            return str(expression)
+        elif isinstance(expression, (Expression, Query)):
+            if not expression.second is None:
+                return expression.op(expression.first, expression.second)
+            elif not expression.first is None:
+                return expression.op(expression.first)
+            else:
+                return expression.op()
+        elif field_type:
+            return self.represent(expression,field_type)
+        elif isinstance(expression,(list,tuple)):
+            return ','.join([self.represent(item,field_type) for item in expression])
+        else:
+            return str(expression)
+
+    def alias(self,table,alias):
+        """
+        given a table object, makes a new table object
+        with alias name.
+        """
+        other = copy.copy(table)
+        other['_ot'] = other._tablename
+        other['ALL'] = SQLALL(other)
+        other['_tablename'] = alias
+        for fieldname in other.fields:
+            other[fieldname] = copy.copy(other[fieldname])
+            other[fieldname]._tablename = alias
+            other[fieldname].tablename = alias
+            other[fieldname].table = other
+        table._db[alias] = other
+        return other
+
+    def _truncate(self,table,mode = ''):
+        tablename = table._tablename
+        return ['TRUNCATE TABLE %s %s;' % (tablename, mode or '')]
+
+    def truncate(self,table,mode= ' '):
+        # Prepare functions "write_to_logfile" and "close_logfile"
+        if table._dbt:
+            logfile = self.file_open(table._loggername, 'a')
+        else:
+            class Logfile(object):
+                def write(self, value):
+                    pass
+                def close(self):
+                    pass
+            logfile = Logfile()
+
+        try:
+            queries = table._db._adapter._truncate(table, mode)
+            for query in queries:
+                logfile.write(query + '\n')
+                self.execute(query)
+            table._db.commit()
+            logfile.write('success!\n')
+        finally:
+            logfile.close()
+
+    def _update(self,tablename,query,fields):
+        if query:
+            sql_w = ' WHERE ' + self.expand(query)
+        else:
+            sql_w = ''
+        sql_v = ','.join(['%s=%s' % (field.name, self.expand(value,field.type)) for (field,value) in fields])
+        return 'UPDATE %s SET %s%s;' % (tablename, sql_v, sql_w)
+
+    def update(self,tablename,query,fields):
+        sql = self._update(tablename,query,fields)
+        self.execute(sql)
+        try:
+            return self.cursor.rowcount
+        except:
+            return None
+
+    def _delete(self,tablename, query):
+        if query:
+            sql_w = ' WHERE ' + self.expand(query)
+        else:
+            sql_w = ''
+        return 'DELETE FROM %s%s;' % (tablename, sql_w)
+
+    def delete(self,tablename,query):
+        sql = self._delete(tablename,query)
+        ### special code to handle CASCADE in SQLite
+        db = self.db
+        table = db[tablename]
+        if self.dbengine=='sqlite' and table._referenced_by:
+            deleted = [x[table._id.name] for x in db(query).select(table._id)]
+        ### end special code to handle CASCADE in SQLite
+        self.execute(sql)
+        try:
+            counter = self.cursor.rowcount
+        except:
+            counter =  None
+        ### special code to handle CASCADE in SQLite
+        if self.dbengine=='sqlite' and counter:
+            for tablename,fieldname in table._referenced_by:
+                f = db[tablename][fieldname]
+                if f.type=='reference '+table._tablename and f.ondelete=='CASCADE':
+                    db(db[tablename][fieldname].belongs(deleted)).delete()
+        ### end special code to handle CASCADE in SQLite
+        return counter
+
+    def get_table(self,query):
+        tablenames = self.tables(query)
+        if len(tablenames)==1:
+            return tablenames[0]
+        elif len(tablenames)<1:
+            raise RuntimeError, "No table selected"
+        else:
+            raise RuntimeError, "Too many tables selected"
+
+    def _select(self, query, fields, attributes):
+        for key in set(attributes.keys())-set(('orderby','groupby','limitby',
+                                               'required','cache','left',
+                                               'distinct','having', 'join')):
+            raise SyntaxError, 'invalid select attribute: %s' % key
+        # ## if not fields specified take them all from the requested tables
+        new_fields = []
+        for item in fields:
+            if isinstance(item,SQLALL):
+                new_fields += item.table
+            else:
+                new_fields.append(item)
+        fields = new_fields
+        tablenames = self.tables(query)
+        query = self.filter_tenant(query,tablenames)
+        if not fields:
+            for table in tablenames:
+                for field in self.db[table]:
+                    fields.append(field)
+        else:
+            for field in fields:
+                if isinstance(field,basestring) and table_field.match(field):
+                    tn,fn = field.split('.')
+                    field = self.db[tn][fn]
+                for tablename in self.tables(field):
+                    if not tablename in tablenames:
+                        tablenames.append(tablename)
+        if len(tablenames) < 1:
+            raise SyntaxError, 'Set: no tables selected'
+        sql_f = ', '.join(map(self.expand,fields))
+        self._colnames = [c.strip() for c in sql_f.split(', ')]
+        if query:
+            sql_w = ' WHERE ' + self.expand(query)
+        else:
+            sql_w = ''
+        sql_o = ''
+        sql_s = ''
+        left = attributes.get('left', False)
+        inner_join = attributes.get('join', False)
+        distinct = attributes.get('distinct', False)
+        groupby = attributes.get('groupby', False)
+        orderby = attributes.get('orderby', False)
+        having = attributes.get('having', False)
+        limitby = attributes.get('limitby', False)
+        if distinct is True:
+            sql_s += 'DISTINCT'
+        elif distinct:
+            sql_s += 'DISTINCT ON (%s)' % distinct
+        if inner_join:
+            icommand = self.JOIN()
+            if not isinstance(inner_join, (tuple, list)):
+                inner_join = [inner_join]
+            ijoint = [t._tablename for t in inner_join if not isinstance(t,Expression)]
+            ijoinon = [t for t in inner_join if isinstance(t, Expression)]
+            ijoinont = [t.first._tablename for t in ijoinon]
+            iexcluded = [t for t in tablenames if not t in ijoint + ijoinont]
+        if left:
+            join = attributes['left']
+            command = self.LEFT_JOIN()
+            if not isinstance(join, (tuple, list)):
+                join = [join]
+            joint = [t._tablename for t in join if not isinstance(t,Expression)]
+            joinon = [t for t in join if isinstance(t, Expression)]
+            #patch join+left patch (solves problem with ordering in left joins)
+            tables_to_merge={}
+            [tables_to_merge.update(dict.fromkeys(self.tables(t))) for t in joinon]
+            joinont = [t.first._tablename for t in joinon]
+            [tables_to_merge.pop(t) for t in joinont if t in tables_to_merge]
+            important_tablenames = joint + joinont + tables_to_merge.keys()
+            excluded = [t for t in tablenames if not t in important_tablenames ]
+        def alias(t):
+            return str(self.db[t])
+        if inner_join and not left:
+            sql_t = ', '.join(alias(t) for t in iexcluded)
+            for t in ijoinon:
+                sql_t += ' %s %s' % (icommand, str(t))
+        elif not inner_join and left:
+            sql_t = ', '.join([alias(t) for t in excluded + tables_to_merge.keys()])
+            if joint:
+                sql_t += ' %s %s' % (command, ','.join([t for t in joint]))
+            for t in joinon:
+                sql_t += ' %s %s' % (command, str(t))
+        elif inner_join and left:
+            sql_t = ','.join([alias(t) for t in excluded + \
+                                  tables_to_merge.keys() if t in iexcluded ])
+            for t in ijoinon:
+                sql_t += ' %s %s' % (icommand, str(t))
+            if joint:
+                sql_t += ' %s %s' % (command, ','.join([t for t in joint]))
+            for t in joinon:
+                sql_t += ' %s %s' % (command, str(t))
+        else:
+            sql_t = ', '.join(alias(t) for t in tablenames)
+        if groupby:
+            if isinstance(groupby, (list, tuple)):
+                groupby = xorify(groupby)
+            sql_o += ' GROUP BY %s' % self.expand(groupby)
+            if having:
+                sql_o += ' HAVING %s' % attributes['having']
+        if orderby:
+            if isinstance(orderby, (list, tuple)):
+                orderby = xorify(orderby)
+            if str(orderby) == '<random>':
+                sql_o += ' ORDER BY %s' % self.RANDOM()
+            else:
+                sql_o += ' ORDER BY %s' % self.expand(orderby)
+        if limitby:
+            if not orderby and tablenames:
+                sql_o += ' ORDER BY %s' % ', '.join(['%s.%s'%(t,x) for t in tablenames for x in ((hasattr(self.db[t],'_primarykey') and self.db[t]._primarykey) or [self.db[t]._id.name])])
+            # oracle does not support limitby
+        return self.select_limitby(sql_s, sql_f, sql_t, sql_w, sql_o, limitby)
+
+    def select_limitby(self, sql_s, sql_f, sql_t, sql_w, sql_o, limitby):
+        if limitby:
+            (lmin, lmax) = limitby
+            sql_o += ' LIMIT %i OFFSET %i' % (lmax - lmin, lmin)
+        return 'SELECT %s %s FROM %s%s%s;' % (sql_s, sql_f, sql_t, sql_w, sql_o)
+
+    def select(self,query,fields,attributes):
+        """
+        Always returns a Rows object, even if it may be empty
+        """
+        def response(sql):
+            self.execute(sql)
+            return self.cursor.fetchall()
+        sql = self._select(query,fields,attributes)
+        if attributes.get('cache', None):
+            (cache_model, time_expire) = attributes['cache']
+            del attributes['cache']
+            key = self.uri + '/' + sql
+            key = (key<=200) and key or hashlib.md5(key).hexdigest()
+            rows = cache_model(key, lambda: response(sql), time_expire)
+        else:
+            rows = response(sql)
+        if isinstance(rows,tuple):
+            rows = list(rows)
+        limitby = attributes.get('limitby',None) or (0,)
+        rows = self.rowslice(rows,limitby[0],None)
+        return self.parse(rows,self._colnames)
+
+    def _count(self,query,distinct=None):
+        tablenames = self.tables(query)
+        if query:
+            sql_w = ' WHERE ' + self.expand(query)
+        else:
+            sql_w = ''
+        sql_t = ','.join(tablenames)
+        if distinct:
+            if isinstance(distinct,(list,tuple)):
+                distinct = xorify(distinct)
+            sql_d = self.expand(distinct)
+            return 'SELECT count(DISTINCT %s) FROM %s%s' % (sql_d, sql_t, sql_w)
+        return 'SELECT count(*) FROM %s%s' % (sql_t, sql_w)
+
+    def count(self,query,distinct=None):
+        self.execute(self._count(query,distinct))
+        return self.cursor.fetchone()[0]
+
+
+    def tables(self,query):
+        tables = set()
+        if isinstance(query, Field):
+            tables.add(query.tablename)
+        elif isinstance(query, (Expression, Query)):
+            if query.first!=None:
+                tables = tables.union(self.tables(query.first))
+            if query.second!=None:
+                tables = tables.union(self.tables(query.second))
+        return list(tables)
+
+    def commit(self):
+        return self.connection.commit()
+
+    def rollback(self):
+        return self.connection.rollback()
+
+    def close(self):
+        return self.connection.close()
+
+    def distributed_transaction_begin(self,key):
+        return
+
+    def prepare(self,key):
+        self.connection.prepare()
+
+    def commit_prepared(self,key):
+        self.connection.commit()
+
+    def rollback_prepared(self,key):
+        self.connection.rollback()
+
+    def concat_add(self,table):
+        return ', ADD '
+
+    def constraint_name(self, table, fieldname):
+        return '%s_%s__constraint' % (table,fieldname)
+
+    def create_sequence_and_triggers(self, query, table, **args):
+        self.execute(query)
+
+    def log_execute(self,*a,**b):
+        self.db._lastsql = a[0]
+        t0 = time.time()
+        ret = self.cursor.execute(*a,**b)
+        self.db._timings.append((a[0],time.time()-t0))
+        return ret
+
+    def execute(self,*a,**b):
+        return self.log_execute(*a, **b)
+
+    def represent(self, obj, fieldtype):
+        if isinstance(obj,CALLABLETYPES):
+            obj = obj()
+        if isinstance(fieldtype, SQLCustomType):
+            return fieldtype.encoder(obj)
+        if isinstance(obj, (Expression, Field)):
+            return str(obj)
+        if fieldtype.startswith('list:'):
+            if not obj:
+                obj = []
+            if not isinstance(obj, (list, tuple)):
+                obj = [obj]
+        if isinstance(obj, (list, tuple)):
+            obj = bar_encode(obj)
+        if obj is None:
+            return 'NULL'
+        if obj == '' and not fieldtype[:2] in ['st', 'te', 'pa', 'up']:
+            return 'NULL'
+        r = self.represent_exceptions(obj,fieldtype)
+        if r != None:
+            return r
+        if fieldtype == 'boolean':
+            if obj and not str(obj)[:1].upper() in ['F', '0']:
+                return "'T'"
+            else:
+                return "'F'"
+        if fieldtype == 'id' or fieldtype == 'integer':
+            return str(int(obj))
+        if fieldtype.startswith('decimal'):
+            return str(obj)
+        elif fieldtype.startswith('reference'): # reference
+            if fieldtype.find('.')>0:
+                return repr(obj)
+            elif isinstance(obj, (Row, Reference)):
+                return str(obj['id'])
+            return str(int(obj))
+        elif fieldtype == 'double':
+            return repr(float(obj))
+        if isinstance(obj, unicode):
+            obj = obj.encode(self.db_codec)
+        if fieldtype == 'blob':
+            obj = base64.b64encode(str(obj))
+        elif fieldtype == 'date':
+            if isinstance(obj, (datetime.date, datetime.datetime)):
+                obj = obj.isoformat()[:10]
+            else:
+                obj = str(obj)
+        elif fieldtype == 'datetime':
+            if isinstance(obj, datetime.datetime):
+                obj = obj.isoformat()[:19].replace('T',' ')
+            elif isinstance(obj, datetime.date):
+                obj = obj.isoformat()[:10]+' 00:00:00'
+            else:
+                obj = str(obj)
+        elif fieldtype == 'time':
+            if isinstance(obj, datetime.time):
+                obj = obj.isoformat()[:10]
+            else:
+                obj = str(obj)
+        if not isinstance(obj,str):
+            obj = str(obj)
+        try:
+            obj.decode(self.db_codec)
+        except:
+            obj = obj.decode('latin1').encode(self.db_codec)
+        return "'%s'" % obj.replace("'", "''")
+
+    def represent_exceptions(self, obj, fieldtype):
+        return None
+
+    def lastrowid(self,table):
+        return None
+
+    def integrity_error_class(self):
+        return type(None)
+
+    def rowslice(self,rows,minimum=0,maximum=None):
+        """ by default this function does nothing, overload when db does not do slicing """
+        return rows
+
+    def parse(self, rows, colnames, blob_decode=True):
+        db = self.db
+        virtualtables = []
+        new_rows = []
+        for (i,row) in enumerate(rows):
+            new_row = Row()
+            for j,colname in enumerate(colnames):
+                value = row[j]
+                if not table_field.match(colnames[j]):
+                    if not '_extra' in new_row:
+                        new_row['_extra'] = Row()
+                    new_row['_extra'][colnames[j]] = value
+                    select_as_parser = re.compile("\s+AS\s+(\S+)")
+                    new_column_name = select_as_parser.search(colnames[j])
+                    if not new_column_name is None:
+                        column_name = new_column_name.groups(0)
+                        setattr(new_row,column_name[0],value)
+                    continue
+                (tablename, fieldname) = colname.split('.')
+                table = db[tablename]
+                field = table[fieldname]
+                field_type = field.type
+                if field.type != 'blob' and isinstance(value, str):
+                    try:
+                        value = value.decode(db._db_codec)
+                    except Exception:
+                        pass
+                if isinstance(value, unicode):
+                    value = value.encode('utf-8')
+                if not tablename in new_row:
+                    colset = new_row[tablename] = Row()
+                    if tablename not in virtualtables:
+                        virtualtables.append(tablename)
+                else:
+                    colset = new_row[tablename]
+
+                if isinstance(field_type, SQLCustomType):
+                    colset[fieldname] = field_type.decoder(value)
+                    # field_type = field_type.type
+                elif not isinstance(field_type, str) or value is None:
+                    colset[fieldname] = value
+                elif isinstance(field_type, str) and \
+                        field_type.startswith('reference'):
+                    referee = field_type[10:].strip()
+                    if not '.' in referee:
+                        colset[fieldname] = rid = Reference(value)
+                        (rid._table, rid._record) = (db[referee], None)
+                    else: ### reference not by id
+                        colset[fieldname] = value
+                elif field_type == 'boolean':
+                    if value == True or str(value)[:1].lower() == 't':
+                        colset[fieldname] = True
+                    else:
+                        colset[fieldname] = False
+                elif field_type == 'date' \
+                        and (not isinstance(value, datetime.date)\
+                                 or isinstance(value, datetime.datetime)):
+                    (y, m, d) = map(int, str(value)[:10].strip().split('-'))
+                    colset[fieldname] = datetime.date(y, m, d)
+                elif field_type == 'time' \
+                        and not isinstance(value, datetime.time):
+                    time_items = map(int,str(value)[:8].strip().split(':')[:3])
+                    if len(time_items) == 3:
+                        (h, mi, s) = time_items
+                    else:
+                        (h, mi, s) = time_items + [0]
+                    colset[fieldname] = datetime.time(h, mi, s)
+                elif field_type == 'datetime'\
+                        and not isinstance(value, datetime.datetime):
+                    (y, m, d) = map(int,str(value)[:10].strip().split('-'))
+                    time_items = map(int,str(value)[11:19].strip().split(':')[:3])
+                    if len(time_items) == 3:
+                        (h, mi, s) = time_items
+                    else:
+                        (h, mi, s) = time_items + [0]
+                    colset[fieldname] = datetime.datetime(y, m, d, h, mi, s)
+                elif field_type == 'blob' and blob_decode:
+                    colset[fieldname] = base64.b64decode(str(value))
+                elif field_type.startswith('decimal'):
+                    decimals = int(field_type[8:-1].split(',')[-1])
+                    if self.dbengine == 'sqlite':
+                        value = ('%.' + str(decimals) + 'f') % value
+                    if not isinstance(value, decimal.Decimal):
+                        value = decimal.Decimal(str(value))
+                    colset[fieldname] = value
+                elif field_type.startswith('list:integer'):
+                    if not self.dbengine=='google:datastore':
+                        colset[fieldname] = bar_decode_integer(value)
+                    else:
+                        colset[fieldname] = value
+                elif field_type.startswith('list:reference'):
+                    if not self.dbengine=='google:datastore':
+                        colset[fieldname] = bar_decode_integer(value)
+                    else:
+                        colset[fieldname] = value
+                elif field_type.startswith('list:string'):
+                    if not self.dbengine=='google:datastore':
+                        colset[fieldname] = bar_decode_string(value)
+                    else:
+                        colset[fieldname] = value
+                else:
+                    colset[fieldname] = value
+                if field_type == 'id':
+                    id = colset[field.name]
+                    colset.update_record = lambda _ = (colset, table, id), **a: update_record(_, a)
+                    colset.delete_record = lambda t = table, i = id: t._db(t._id==i).delete()
+                    for (referee_table, referee_name) in \
+                            table._referenced_by:
+                        s = db[referee_table][referee_name]
+                        if not referee_table in colset:
+                            # for backward compatibility
+                            colset[referee_table] = Set(db, s == id)
+                        ### add new feature?
+                        ### colset[referee_table+'_by_'+refree_name] = Set(db, s == id)
+                    colset['id'] = id
+            new_rows.append(new_row)
+        rowsobj = Rows(db, new_rows, colnames, rawrows=rows)
+        for tablename in virtualtables:
+            for item in db[tablename].virtualfields:
+                try:
+                    rowsobj = rowsobj.setvirtualfields(**{tablename:item})
+                except KeyError:
+                    # to avoid breaking virtualfields when partial select
+                    pass
+        return rowsobj
+
+    def filter_tenant(self,query,tablenames):
+        fieldname = self.db._request_tenant
+        for tablename in tablenames:
+            table = self.db[tablename]
+            if fieldname in table:
+                default = table[fieldname].default
+                if default!=None:
+                    query = query&(table[fieldname]==default)
+        return query
+
+###################################################################################
+# List of all the available adapters, they all extend BaseAdapter
+###################################################################################
+
+class SQLiteAdapter(BaseAdapter):
+
+    driver = globals().get('sqlite3',None)
+
+    def EXTRACT(self,field,what):
+        return "web2py_extract('%s',%s)" % (what,self.expand(field))
+
+    @staticmethod
+    def web2py_extract(lookup, s):
+        table = {
+            'year': (0, 4),
+            'month': (5, 7),
+            'day': (8, 10),
+            'hour': (11, 13),
+            'minute': (14, 16),
+            'second': (17, 19),
+            }
+        try:
+            (i, j) = table[lookup]
+            return int(s[i:j])
+        except:
+            return None
+
+    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8',
+                 credential_decoder=lambda x:x, driver_args={},
+                    adapter_args={}):
+        self.db = db
+        self.dbengine = "sqlite"
+        self.uri = uri
+        self.pool_size = pool_size
+        self.folder = folder
+        self.db_codec = db_codec
+        self.find_or_make_work_folder()
+        path_encoding = sys.getfilesystemencoding() or locale.getdefaultlocale()[1] or 'utf8'
+        if uri.startswith('sqlite:memory'):
+            dbpath = ':memory:'
+        else:
+            dbpath = uri.split('://')[1]
+            if dbpath[0] != '/':
+                dbpath = os.path.join(self.folder.decode(path_encoding).encode('utf8'),dbpath)
+        if not 'check_same_thread' in driver_args:
+            driver_args['check_same_thread'] = False
+        def connect(dbpath=dbpath, driver_args=driver_args):
+            return self.driver.Connection(dbpath, **driver_args)
+        self.pool_connection(connect)
+        self.cursor = self.connection.cursor()
+        self.connection.create_function('web2py_extract', 2, SQLiteAdapter.web2py_extract)
+
+    def _truncate(self,table,mode = ''):
+        tablename = table._tablename
+        return ['DELETE FROM %s;' % tablename,
+                "DELETE FROM sqlite_sequence WHERE name='%s';" % tablename]
+
+    def lastrowid(self,table):
+        return self.cursor.lastrowid
+
+
+class JDBCSQLiteAdapter(SQLiteAdapter):
+
+    driver = globals().get('zxJDBC',None)
+
+    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8',
+                 credential_decoder=lambda x:x, driver_args={},
+                    adapter_args={}):
+        self.db = db
+        self.dbengine = "sqlite"
+        self.uri = uri
+        self.pool_size = pool_size
+        self.folder = folder
+        self.db_codec = db_codec
+        self.find_or_make_work_folder()
+        path_encoding = sys.getfilesystemencoding() or locale.getdefaultlocale()[1] or 'utf8'
+        if uri.startswith('sqlite:memory'):
+            dbpath = ':memory:'
+        else:
+            dbpath = uri.split('://')[1]
+            if dbpath[0] != '/':
+                dbpath = os.path.join(self.folder.decode(path_encoding).encode('utf8'),dbpath)
+        def connect(dbpath=dbpath,driver_args=driver_args):
+            return self.driver.connect(java.sql.DriverManager.getConnection('jdbc:sqlite:'+dbpath),**driver_args)
+        self.pool_connection(connect)
+        self.cursor = self.connection.cursor()
+        # FIXME http://www.zentus.com/sqlitejdbc/custom_functions.html for UDFs
+        # self.connection.create_function('web2py_extract', 2, SQLiteAdapter.web2py_extract)
+
+    def execute(self,a):
+        return self.log_execute(a[:-1])
+
+
+class MySQLAdapter(BaseAdapter):
+
+    driver = globals().get('pymysql',None)
+    maxcharlength = 255
+    commit_on_alter_table = True
+    support_distributed_transaction = True
+    types = {
+        'boolean': 'CHAR(1)',
+        'string': 'VARCHAR(%(length)s)',
+        'text': 'LONGTEXT',
+        'password': 'VARCHAR(%(length)s)',
+        'blob': 'LONGBLOB',
+        'upload': 'VARCHAR(%(length)s)',
+        'integer': 'INT',
+        'double': 'DOUBLE',
+        'decimal': 'NUMERIC(%(precision)s,%(scale)s)',
+        'date': 'DATE',
+        'time': 'TIME',
+        'datetime': 'DATETIME',
+        'id': 'INT AUTO_INCREMENT NOT NULL',
+        'reference': 'INT, INDEX %(field_name)s__idx (%(field_name)s), FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s',
+        'list:integer': 'LONGTEXT',
+        'list:string': 'LONGTEXT',
+        'list:reference': 'LONGTEXT',
+        }
+
+    def RANDOM(self):
+        return 'RAND()'
+
+    def SUBSTRING(self,field,parameters):
+        return 'SUBSTRING(%s,%s,%s)' % (self.expand(field), parameters[0], parameters[1])
+
+    def _drop(self,table,mode):
+        # breaks db integrity but without this mysql does not drop table
+        return ['SET FOREIGN_KEY_CHECKS=0;','DROP TABLE %s;' % table,'SET FOREIGN_KEY_CHECKS=1;']
+
+    def distributed_transaction_begin(self,key):
+        self.execute('XA START;')
+
+    def prepare(self,key):
+        self.execute("XA END;")
+        self.execute("XA PREPARE;")
+
+    def commit_prepared(self,ley):
+        self.execute("XA COMMIT;")
+
+    def rollback_prepared(self,key):
+        self.execute("XA ROLLBACK;")
+
+    def concat_add(self,table):
+        return '; ALTER TABLE %s ADD ' % table
+
+    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8',
+                 credential_decoder=lambda x:x, driver_args={},
+                    adapter_args={}):
+        self.db = db
+        self.dbengine = "mysql"
+        self.uri = uri
+        self.pool_size = pool_size
+        self.folder = folder
+        self.db_codec = db_codec
+        self.find_or_make_work_folder()
+        uri = uri.split('://')[1]
+        m = re.compile('^(?P<user>[^:@]+)(\:(?P<password>[^@]*))?@(?P<host>[^\:/]+)(\:(?P<port>[0-9]+))?/(?P<db>[^?]+)(\?set_encoding=(?P<charset>\w+))?$').match(uri)
+        if not m:
+            raise SyntaxError, \
+                "Invalid URI string in DAL: %s" % self.uri
+        user = credential_decoder(m.group('user'))
+        if not user:
+            raise SyntaxError, 'User required'
+        password = credential_decoder(m.group('password'))
+        if not password:
+            password = ''
+        host = m.group('host')
+        if not host:
+            raise SyntaxError, 'Host name required'
+        db = m.group('db')
+        if not db:
+            raise SyntaxError, 'Database name required'
+        port = int(m.group('port') or '3306')
+        charset = m.group('charset') or 'utf8'
+        driver_args.update(dict(db=db,
+                                user=credential_decoder(user),
+                                passwd=credential_decoder(password),
+                                host=host,
+                                port=port,
+                                charset=charset))
+        def connect(driver_args=driver_args):
+            return self.driver.connect(**driver_args)
+        self.pool_connection(connect)
+        self.cursor = self.connection.cursor()
+        self.execute('SET FOREIGN_KEY_CHECKS=1;')
+        self.execute("SET sql_mode='NO_BACKSLASH_ESCAPES';")
+
+    def lastrowid(self,table):
+        self.execute('select last_insert_id();')
+        return int(self.cursor.fetchone()[0])
+
+
+class PostgreSQLAdapter(BaseAdapter):
+
+    driver = globals().get('psycopg2',None)
+
+    support_distributed_transaction = True
+    types = {
+        'boolean': 'CHAR(1)',
+        'string': 'VARCHAR(%(length)s)',
+        'text': 'TEXT',
+        'password': 'VARCHAR(%(length)s)',
+        'blob': 'BYTEA',
+        'upload': 'VARCHAR(%(length)s)',
+        'integer': 'INTEGER',
+        'double': 'FLOAT8',
+        'decimal': 'NUMERIC(%(precision)s,%(scale)s)',
+        'date': 'DATE',
+        'time': 'TIME',
+        'datetime': 'TIMESTAMP',
+        'id': 'SERIAL PRIMARY KEY',
+        'reference': 'INTEGER REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s',
+        'list:integer': 'TEXT',
+        'list:string': 'TEXT',
+        'list:reference': 'TEXT',
+        }
+
+    def sequence_name(self,table):
+        return '%s_id_Seq' % table
+
+    def RANDOM(self):
+        return 'RANDOM()'
+
+    def distributed_transaction_begin(self,key):
+        return
+
+    def prepare(self,key):
+        self.execute("PREPARE TRANSACTION '%s';" % key)
+
+    def commit_prepared(self,key):
+        self.execute("COMMIT PREPARED '%s';" % key)
+
+    def rollback_prepared(self,key):
+        self.execute("ROLLBACK PREPARED '%s';" % key)
+
+    def create_sequence_and_triggers(self, query, table, **args):
+        # following lines should only be executed if table._sequence_name does not exist
+        # self.execute('CREATE SEQUENCE %s;' % table._sequence_name)
+        # self.execute("ALTER TABLE %s ALTER COLUMN %s SET DEFAULT NEXTVAL('%s');" \
+        #              % (table._tablename, table._fieldname, table._sequence_name))
+        self.execute(query)
+
+    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8',
+                 credential_decoder=lambda x:x, driver_args={},
+                    adapter_args={}):
+        self.db = db
+        self.dbengine = "postgres"
+        self.uri = uri
+        self.pool_size = pool_size
+        self.folder = folder
+        self.db_codec = db_codec
+        self.find_or_make_work_folder()
+        uri = uri.split('://')[1]
+        m = re.compile('^(?P<user>[^:@]+)(\:(?P<password>[^@]*))?@(?P<host>[^\:@/]+)(\:(?P<port>[0-9]+))?/(?P<db>[^\?]+)(\?sslmode=(?P<sslmode>.+))?$').match(uri)
+        if not m:
+            raise SyntaxError, "Invalid URI string in DAL"
+        user = credential_decoder(m.group('user'))
+        if not user:
+            raise SyntaxError, 'User required'
+        password = credential_decoder(m.group('password'))
+        if not password:
+            password = ''
+        host = m.group('host')
+        if not host:
+            raise SyntaxError, 'Host name required'
+        db = m.group('db')
+        if not db:
+            raise SyntaxError, 'Database name required'
+        port = m.group('port') or '5432'
+        sslmode = m.group('sslmode')
+        if sslmode:
+            msg = ("dbname='%s' user='%s' host='%s'"
+                   "port=%s password='%s' sslmode='%s'") \
+                   % (db, user, host, port, password, sslmode)
+        else:
+            msg = ("dbname='%s' user='%s' host='%s'"
+                   "port=%s password='%s'") \
+                   % (db, user, host, port, password)
+        def connect(msg=msg,driver_args=driver_args):
+            return self.driver.connect(msg,**driver_args)
+        self.pool_connection(connect)
+        self.connection.set_client_encoding('UTF8')
+        self.cursor = self.connection.cursor()
+        self.execute('BEGIN;')
+        self.execute("SET CLIENT_ENCODING TO 'UNICODE';")
+        self.execute("SET standard_conforming_strings=on;")
+
+    def lastrowid(self,table):
+        self.execute("select currval('%s')" % table._sequence_name)
+        return int(self.cursor.fetchone()[0])
+
+    def LIKE(self,first,second):
+        return '(%s ILIKE %s)' % (self.expand(first),self.expand(second,'string'))
+
+    def STARTSWITH(self,first,second):
+        return '(%s ILIKE %s)' % (self.expand(first),self.expand(second+'%','string'))
+
+    def ENDSWITH(self,first,second):
+        return '(%s ILIKE %s)' % (self.expand(first),self.expand('%'+second,'string'))
+
+    def CONTAINS(self,first,second):
+        if first.type in ('string','text'):
+            key = '%'+str(second).replace('%','%%')+'%'
+        elif first.type.startswith('list:'):
+            key = '%|'+str(second).replace('|','||').replace('%','%%')+'|%'
+        return '(%s ILIKE %s)' % (self.expand(first),self.expand(key,'string'))
+
+class JDBCPostgreSQLAdapter(PostgreSQLAdapter):
+
+    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8',
+                 credential_decoder=lambda x:x, driver_args={},
+                    adapter_args={}):
+        self.db = db
+        self.dbengine = "postgres"
+        self.uri = uri
+        self.pool_size = pool_size
+        self.folder = folder
+        self.db_codec = db_codec
+        self.find_or_make_work_folder()
+        uri = uri.split('://')[1]
+        m = re.compile('^(?P<user>[^:@]+)(\:(?P<password>[^@]*))?@(?P<host>[^\:/]+)(\:(?P<port>[0-9]+))?/(?P<db>.+)$').match(uri)
+        if not m:
+            raise SyntaxError, "Invalid URI string in DAL"
+        user = credential_decoder(m.group('user'))
+        if not user:
+            raise SyntaxError, 'User required'
+        password = credential_decoder(m.group('password'))
+        if not password:
+            password = ''
+        host = m.group('host')
+        if not host:
+            raise SyntaxError, 'Host name required'
+        db = m.group('db')
+        if not db:
+            raise SyntaxError, 'Database name required'
+        port = m.group('port') or '5432'
+        msg = ('jdbc:postgresql://%s:%s/%s' % (host, port, db), user, password)
+        def connect(msg=msg,driver_args=driver_args):
+            return self.driver.connect(*msg,**driver_args)
+        self.pool_connection(connect)
+        self.connection.set_client_encoding('UTF8')
+        self.cursor = self.connection.cursor()
+        self.execute('BEGIN;')
+        self.execute("SET CLIENT_ENCODING TO 'UNICODE';")
+
+
+class OracleAdapter(BaseAdapter):
+
+    driver = globals().get('cx_Oracle',None)
+
+    commit_on_alter_table = False
+    types = {
+        'boolean': 'CHAR(1)',
+        'string': 'VARCHAR2(%(length)s)',
+        'text': 'CLOB',
+        'password': 'VARCHAR2(%(length)s)',
+        'blob': 'CLOB',
+        'upload': 'VARCHAR2(%(length)s)',
+        'integer': 'INT',
+        'double': 'FLOAT',
+        'decimal': 'NUMERIC(%(precision)s,%(scale)s)',
+        'date': 'DATE',
+        'time': 'CHAR(8)',
+        'datetime': 'DATE',
+        'id': 'NUMBER PRIMARY KEY',
+        'reference': 'NUMBER, CONSTRAINT %(constraint_name)s FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s',
+        'list:integer': 'CLOB',
+        'list:string': 'CLOB',
+        'list:reference': 'CLOB',
+        }
+
+    def sequence_name(self,tablename):
+        return '%s_sequence' % tablename
+
+    def trigger_name(self,tablename):
+        return '%s_trigger' % tablename
+
+    def LEFT_JOIN(self):
+        return 'LEFT OUTER JOIN'
+
+    def RANDOM(self):
+        return 'dbms_random.value'
+
+    def NOT_NULL(self,default,field_type):
+        return 'DEFAULT %s NOT NULL' % self.represent(default,field_type)
+
+    def _drop(self,table,mode):
+        sequence_name = table._sequence_name
+        return ['DROP TABLE %s %s;' % (table, mode), 'DROP SEQUENCE %s;' % sequence_name]
+
+    def select_limitby(self, sql_s, sql_f, sql_t, sql_w, sql_o, limitby):
+        if limitby:
+            (lmin, lmax) = limitby
+            if len(sql_w) > 1:
+                sql_w_row = sql_w + ' AND w_row > %i' % lmin
+            else:
+                sql_w_row = 'WHERE w_row > %i' % lmin
+            return 'SELECT %s %s FROM (SELECT w_tmp.*, ROWNUM w_row FROM (SELECT %s FROM %s%s%s) w_tmp WHERE ROWNUM<=%i) %s %s %s;' % (sql_s, sql_f, sql_f, sql_t, sql_w, sql_o, lmax, sql_t, sql_w_row, sql_o)
+        return 'SELECT %s %s FROM %s%s%s;' % (sql_s, sql_f, sql_t, sql_w, sql_o)
+
+    def constraint_name(self, tablename, fieldname):
+        constraint_name = BaseAdapter.constraint_name(self, tablename, fieldname)
+        if len(constraint_name)>30:
+            constraint_name = '%s_%s__constraint' % (tablename[:10], fieldname[:7])
+        return constraint_name
+
+    def represent_exceptions(self, obj, fieldtype):
+        if fieldtype == 'blob':
+            obj = base64.b64encode(str(obj))
+            return ":CLOB('%s')" % obj
+        elif fieldtype == 'date':
+            if isinstance(obj, (datetime.date, datetime.datetime)):
+                obj = obj.isoformat()[:10]
+            else:
+                obj = str(obj)
+            return "to_date('%s','yyyy-mm-dd')" % obj
+        elif fieldtype == 'datetime':
+            if isinstance(obj, datetime.datetime):
+                obj = obj.isoformat()[:19].replace('T',' ')
+            elif isinstance(obj, datetime.date):
+                obj = obj.isoformat()[:10]+' 00:00:00'
+            else:
+                obj = str(obj)
+            return "to_date('%s','yyyy-mm-dd hh24:mi:ss')" % obj
+        return None
+
+    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8',
+                 credential_decoder=lambda x:x, driver_args={},
+                    adapter_args={}):
+        self.db = db
+        self.dbengine = "oracle"
+        self.uri = uri
+        self.pool_size = pool_size
+        self.folder = folder
+        self.db_codec = db_codec
+        self.find_or_make_work_folder()
+        uri = uri.split('://')[1]
+        if not 'threaded' in driver_args:
+            driver_args['threaded']=True
+        def connect(uri=uri,driver_args=driver_args):
+            return self.driver.connect(uri,**driver_args)
+        self.pool_connection(connect)
+        self.cursor = self.connection.cursor()
+        self.execute("ALTER SESSION SET NLS_DATE_FORMAT = 'YYYY-MM-DD HH24:MI:SS';")
+        self.execute("ALTER SESSION SET NLS_TIMESTAMP_FORMAT = 'YYYY-MM-DD HH24:MI:SS';")
+    oracle_fix = re.compile("[^']*('[^']*'[^']*)*\:(?P<clob>CLOB\('([^']+|'')*'\))")
+
+    def execute(self, command):
+        args = []
+        i = 1
+        while True:
+            m = self.oracle_fix.match(command)
+            if not m:
+                break
+            command = command[:m.start('clob')] + str(i) + command[m.end('clob'):]
+            args.append(m.group('clob')[6:-2].replace("''", "'"))
+            i += 1
+        return self.log_execute(command[:-1], args)
+
+    def create_sequence_and_triggers(self, query, table, **args):
+        tablename = table._tablename
+        sequence_name = table._sequence_name
+        trigger_name = table._trigger_name
+        self.execute(query)
+        self.execute('CREATE SEQUENCE %s START WITH 1 INCREMENT BY 1 NOMAXVALUE;' % sequence_name)
+        self.execute('CREATE OR REPLACE TRIGGER %s BEFORE INSERT ON %s FOR EACH ROW BEGIN SELECT %s.nextval INTO :NEW.id FROM DUAL; END;\n' % (trigger_name, tablename, sequence_name))
+
+    def lastrowid(self,table):
+        sequence_name = table._sequence_name
+        self.execute('SELECT %s.currval FROM dual;' % sequence_name)
+        return int(self.cursor.fetchone()[0])
+
+
+class MSSQLAdapter(BaseAdapter):
+
+    driver = globals().get('pyodbc',None)
+
+    types = {
+        'boolean': 'BIT',
+        'string': 'VARCHAR(%(length)s)',
+        'text': 'TEXT',
+        'password': 'VARCHAR(%(length)s)',
+        'blob': 'IMAGE',
+        'upload': 'VARCHAR(%(length)s)',
+        'integer': 'INT',
+        'double': 'FLOAT',
+        'decimal': 'NUMERIC(%(precision)s,%(scale)s)',
+        'date': 'DATETIME',
+        'time': 'CHAR(8)',
+        'datetime': 'DATETIME',
+        'id': 'INT IDENTITY PRIMARY KEY',
+        'reference': 'INT NULL, CONSTRAINT %(constraint_name)s FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s',
+        'reference FK': ', CONSTRAINT FK_%(constraint_name)s FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s',
+        'reference TFK': ' CONSTRAINT FK_%(foreign_table)s_PK FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_table)s (%(foreign_key)s) ON DELETE %(on_delete_action)s',
+        'list:integer': 'TEXT',
+        'list:string': 'TEXT',
+        'list:reference': 'TEXT',
+        }
+
+    def EXTRACT(self,field,what):
+        return "DATEPART(%s,%s)" % (what, self.expand(field))
+
+    def LEFT_JOIN(self):
+        return 'LEFT OUTER JOIN'
+
+    def RANDOM(self):
+        return 'NEWID()'
+
+    def ALLOW_NULL(self):
+        return ' NULL'
+
+    def SUBSTRING(self,field,parameters):
+        return 'SUBSTRING(%s,%s,%s)' % (self.expand(field), parameters[0], parameters[1])
+
+    def PRIMARY_KEY(self,key):
+        return 'PRIMARY KEY CLUSTERED (%s)' % key
+
+    def select_limitby(self, sql_s, sql_f, sql_t, sql_w, sql_o, limitby):
+        if limitby:
+            (lmin, lmax) = limitby
+            sql_s += ' TOP %i' % lmax
+        return 'SELECT %s %s FROM %s%s%s;' % (sql_s, sql_f, sql_t, sql_w, sql_o)
+
+    def represent_exceptions(self, obj, fieldtype):
+        if fieldtype == 'boolean':
+            if obj and not str(obj)[0].upper() == 'F':
+                return '1'
+            else:
+                return '0'
+        return None
+
+    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8',
+                 credential_decoder=lambda x:x, driver_args={},
+                    adapter_args={}, fake_connect=False):
+        self.db = db
+        self.dbengine = "mssql"
+        self.uri = uri
+        self.pool_size = pool_size
+        self.folder = folder
+        self.db_codec = db_codec
+        self.find_or_make_work_folder()
+        # ## read: http://bytes.com/groups/python/460325-cx_oracle-utf8
+        uri = uri.split('://')[1]
+        if '@' not in uri:
+            try:
+                m = re.compile('^(?P<dsn>.+)$').match(uri)
+                if not m:
+                    raise SyntaxError, \
+                        'Parsing uri string(%s) has no result' % self.uri
+                dsn = m.group('dsn')
+                if not dsn:
+                    raise SyntaxError, 'DSN required'
+            except SyntaxError, e:
+                logger.error('NdGpatch error')
+                raise e
+            cnxn = 'DSN=%s' % dsn
+        else:
+            m = re.compile('^(?P<user>[^:@]+)(\:(?P<password>[^@]*))?@(?P<host>[^\:/]+)(\:(?P<port>[0-9]+))?/(?P<db>[^\?]+)(\?(?P<urlargs>.*))?$').match(uri)
+            if not m:
+                raise SyntaxError, \
+                    "Invalid URI string in DAL: %s" % uri
+            user = credential_decoder(m.group('user'))
+            if not user:
+                raise SyntaxError, 'User required'
+            password = credential_decoder(m.group('password'))
+            if not password:
+                password = ''
+            host = m.group('host')
+            if not host:
+                raise SyntaxError, 'Host name required'
+            db = m.group('db')
+            if not db:
+                raise SyntaxError, 'Database name required'
+            port = m.group('port') or '1433'
+            # Parse the optional url name-value arg pairs after the '?'
+            # (in the form of arg1=value1&arg2=value2&...)
+            # Default values (drivers like FreeTDS insist on uppercase parameter keys)
+            argsdict = { 'DRIVER':'{SQL Server}' }
+            urlargs = m.group('urlargs') or ''
+            argpattern = re.compile('(?P<argkey>[^=]+)=(?P<argvalue>[^&]*)')
+            for argmatch in argpattern.finditer(urlargs):
+                argsdict[str(argmatch.group('argkey')).upper()] = argmatch.group('argvalue')
+            urlargs = ';'.join(['%s=%s' % (ak, av) for (ak, av) in argsdict.items()])
+            cnxn = 'SERVER=%s;PORT=%s;DATABASE=%s;UID=%s;PWD=%s;%s' \
+                % (host, port, db, user, password, urlargs)
+        def connect(cnxn=cnxn,driver_args=driver_args):
+            return self.driver.connect(cnxn,**driver_args)
+        if not fake_connect:
+            self.pool_connection(connect)
+            self.cursor = self.connection.cursor()
+
+    def lastrowid(self,table):
+        #self.execute('SELECT @@IDENTITY;')
+        self.execute('SELECT SCOPE_IDENTITY();')
+        return int(self.cursor.fetchone()[0])
+
+    def integrity_error_class(self):
+        return pyodbc.IntegrityError
+
+    def rowslice(self,rows,minimum=0,maximum=None):
+        if maximum is None:
+            return rows[minimum:]
+        return rows[minimum:maximum]
+
+
+class MSSQL2Adapter(MSSQLAdapter):
+    types = {
+        'boolean': 'CHAR(1)',
+        'string': 'NVARCHAR(%(length)s)',
+        'text': 'NTEXT',
+        'password': 'NVARCHAR(%(length)s)',
+        'blob': 'IMAGE',
+        'upload': 'NVARCHAR(%(length)s)',
+        'integer': 'INT',
+        'double': 'FLOAT',
+        'decimal': 'NUMERIC(%(precision)s,%(scale)s)',
+        'date': 'DATETIME',
+        'time': 'CHAR(8)',
+        'datetime': 'DATETIME',
+        'id': 'INT IDENTITY PRIMARY KEY',
+        'reference': 'INT, CONSTRAINT %(constraint_name)s FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s',
+        'reference FK': ', CONSTRAINT FK_%(constraint_name)s FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s',
+        'reference TFK': ' CONSTRAINT FK_%(foreign_table)s_PK FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_table)s (%(foreign_key)s) ON DELETE %(on_delete_action)s',
+        'list:integer': 'NTEXT',
+        'list:string': 'NTEXT',
+        'list:reference': 'NTEXT',
+        }
+
+    def represent(self, obj, fieldtype):
+        value = BaseAdapter.represent(self, obj, fieldtype)
+        if (fieldtype == 'string' or fieldtype == 'text') and value[:1]=="'":
+            value = 'N'+value
+        return value
+
+    def execute(self,a):
+        return self.log_execute(a.decode('utf8'))
+
+
+class FireBirdAdapter(BaseAdapter):
+
+    driver = globals().get('pyodbc',None)
+
+    commit_on_alter_table = False
+    support_distributed_transaction = True
+    types = {
+        'boolean': 'CHAR(1)',
+        'string': 'VARCHAR(%(length)s)',
+        'text': 'BLOB SUB_TYPE 1',
+        'password': 'VARCHAR(%(length)s)',
+        'blob': 'BLOB SUB_TYPE 0',
+        'upload': 'VARCHAR(%(length)s)',
+        'integer': 'INTEGER',
+        'double': 'DOUBLE PRECISION',
+        'decimal': 'DECIMAL(%(precision)s,%(scale)s)',
+        'date': 'DATE',
+        'time': 'TIME',
+        'datetime': 'TIMESTAMP',
+        'id': 'INTEGER PRIMARY KEY',
+        'reference': 'INTEGER REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s',
+        'list:integer': 'BLOB SUB_TYPE 1',
+        'list:string': 'BLOB SUB_TYPE 1',
+        'list:reference': 'BLOB SUB_TYPE 1',
+        }
+
+    def sequence_name(self,tablename):
+        return 'genid_%s' % tablename
+
+    def trigger_name(self,tablename):
+        return 'trg_id_%s' % tablename
+
+    def RANDOM(self):
+        return 'RAND()'
+
+    def NOT_NULL(self,default,field_type):
+        return 'DEFAULT %s NOT NULL' % self.represent(default,field_type)
+
+    def SUBSTRING(self,field,parameters):
+        return 'SUBSTRING(%s from %s for %s)' % (self.expand(field), parameters[0], parameters[1])
+
+    def _drop(self,table,mode):
+        sequence_name = table._sequence_name
+        return ['DROP TABLE %s %s;' % (table, mode), 'DROP GENERATOR %s;' % sequence_name]
+
+    def select_limitby(self, sql_s, sql_f, sql_t, sql_w, sql_o, limitby):
+        if limitby:
+            (lmin, lmax) = limitby
+            sql_s += ' FIRST %i SKIP %i' % (lmax - lmin, lmin)
+        return 'SELECT %s %s FROM %s%s%s;' % (sql_s, sql_f, sql_t, sql_w, sql_o)
+
+    def _truncate(self,table,mode = ''):
+        return ['DELETE FROM %s;' % table._tablename,
+                'SET GENERATOR %s TO 0;' % table._sequence_name]
+
+    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8',
+                 credential_decoder=lambda x:x, driver_args={},
+                    adapter_args={}):
+        self.db = db
+        self.dbengine = "firebird"
+        self.uri = uri
+        self.pool_size = pool_size
+        self.folder = folder
+        self.db_codec = db_codec
+        self.find_or_make_work_folder()
+        uri = uri.split('://')[1]
+        m = re.compile('^(?P<user>[^:@]+)(\:(?P<password>[^@]*))?@(?P<host>[^\:/]+)(\:(?P<port>[0-9]+))?/(?P<db>.+?)(\?set_encoding=(?P<charset>\w+))?$').match(uri)
+        if not m:
+            raise SyntaxError, "Invalid URI string in DAL: %s" % uri
+        user = credential_decoder(m.group('user'))
+        if not user:
+            raise SyntaxError, 'User required'
+        password = credential_decoder(m.group('password'))
+        if not password:
+            password = ''
+        host = m.group('host')
+        if not host:
+            raise SyntaxError, 'Host name required'
+        port = int(m.group('port') or 3050)
+        db = m.group('db')
+        if not db:
+            raise SyntaxError, 'Database name required'
+        charset = m.group('charset') or 'UTF8'
+        driver_args.update(dict(dsn='%s/%s:%s' % (host,port,db),
+                                   user = credential_decoder(user),
+                                   password = credential_decoder(password),
+                                   charset = charset))
+        if adapter_args.has_key('driver_name'):
+            if adapter_args['driver_name'] == 'kinterbasdb':
+                self.driver = kinterbasdb
+            elif adapter_args['driver_name'] == 'firebirdsql':
+                self.driver = firebirdsql
+        else:
+            self.driver = kinterbasdb        
+        def connect(driver_args=driver_args):
+            return self.driver.connect(**driver_args)
+        self.pool_connection(connect)
+        self.cursor = self.connection.cursor()
+
+    def create_sequence_and_triggers(self, query, table, **args):
+        tablename = table._tablename
+        sequence_name = table._sequence_name
+        trigger_name = table._trigger_name
+        self.execute(query)
+        self.execute('create generator %s;' % sequence_name)
+        self.execute('set generator %s to 0;' % sequence_name)
+        self.execute('create trigger %s for %s active before insert position 0 as\nbegin\nif(new.id is null) then\nbegin\nnew.id = gen_id(%s, 1);\nend\nend;' % (trigger_name, tablename, sequence_name))
+
+    def lastrowid(self,table):
+        sequence_name = table._sequence_name
+        self.execute('SELECT gen_id(%s, 0) FROM rdb$database' % sequence_name)
+        return int(self.cursor.fetchone()[0])
+
+
+class FireBirdEmbeddedAdapter(FireBirdAdapter):
+
+    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8',
+                 credential_decoder=lambda x:x, driver_args={},
+                    adapter_args={}):
+        self.db = db
+        self.dbengine = "firebird"
+        self.uri = uri
+        self.pool_size = pool_size
+        self.folder = folder
+        self.db_codec = db_codec
+        self.find_or_make_work_folder()
+        uri = uri.split('://')[1]
+        m = re.compile('^(?P<user>[^:@]+)(\:(?P<password>[^@]*))?@(?P<path>[^\?]+)(\?set_encoding=(?P<charset>\w+))?$').match(uri)
+        if not m:
+            raise SyntaxError, \
+                "Invalid URI string in DAL: %s" % self.uri
+        user = credential_decoder(m.group('user'))
+        if not user:
+            raise SyntaxError, 'User required'
+        password = credential_decoder(m.group('password'))
+        if not password:
+            password = ''
+        pathdb = m.group('path')
+        if not pathdb:
+            raise SyntaxError, 'Path required'
+        charset = m.group('charset')
+        if not charset:
+            charset = 'UTF8'
+        host = ''
+        driver_args.update(dict(host=host,
+                                   database=pathdb,
+                                   user=credential_decoder(user),
+                                   password=credential_decoder(password),
+                                   charset=charset))
+        #def connect(driver_args=driver_args):
+        #    return kinterbasdb.connect(**driver_args)
+        if adapter_args.has_key('driver_name'):
+            if adapter_args['driver_name'] == 'kinterbasdb':
+                self.driver = kinterbasdb
+            elif adapter_args['driver_name'] == 'firebirdsql':
+                self.driver = firebirdsql
+        else:
+            self.driver = kinterbasdb        
+        def connect(driver_args=driver_args):
+            return self.driver.connect(**driver_args)
+        self.pool_connection(connect)
+        self.cursor = self.connection.cursor()
+
+
+class InformixAdapter(BaseAdapter):
+
+    driver = globals().get('informixdb',None)
+
+    types = {
+        'boolean': 'CHAR(1)',
+        'string': 'VARCHAR(%(length)s)',
+        'text': 'BLOB SUB_TYPE 1',
+        'password': 'VARCHAR(%(length)s)',
+        'blob': 'BLOB SUB_TYPE 0',
+        'upload': 'VARCHAR(%(length)s)',
+        'integer': 'INTEGER',
+        'double': 'FLOAT',
+        'decimal': 'NUMERIC(%(precision)s,%(scale)s)',
+        'date': 'DATE',
+        'time': 'CHAR(8)',
+        'datetime': 'DATETIME',
+        'id': 'SERIAL',
+        'reference': 'INTEGER REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s',
+        'reference FK': 'REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s CONSTRAINT FK_%(table_name)s_%(field_name)s',
+        'reference TFK': 'FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_table)s (%(foreign_key)s) ON DELETE %(on_delete_action)s CONSTRAINT TFK_%(table_name)s_%(field_name)s',
+        'list:integer': 'BLOB SUB_TYPE 1',
+        'list:string': 'BLOB SUB_TYPE 1',
+        'list:reference': 'BLOB SUB_TYPE 1',
+        }
+
+    def RANDOM(self):
+        return 'Random()'
+
+    def NOT_NULL(self,default,field_type):
+        return 'DEFAULT %s NOT NULL' % self.represent(default,field_type)
+
+    def select_limitby(self, sql_s, sql_f, sql_t, sql_w, sql_o, limitby):
+        if limitby:
+            (lmin, lmax) = limitby
+            fetch_amt = lmax - lmin
+            dbms_version = int(self.connection.dbms_version.split('.')[0])
+            if lmin and (dbms_version >= 10):
+                # Requires Informix 10.0+
+                sql_s += ' SKIP %d' % (lmin, )
+            if fetch_amt and (dbms_version >= 9):
+                # Requires Informix 9.0+
+                sql_s += ' FIRST %d' % (fetch_amt, )
+        return 'SELECT %s %s FROM %s%s%s;' % (sql_s, sql_f, sql_t, sql_w, sql_o)
+
+    def represent_exceptions(self, obj, fieldtype):
+        if fieldtype == 'date':
+            if isinstance(obj, (datetime.date, datetime.datetime)):
+                obj = obj.isoformat()[:10]
+            else:
+                obj = str(obj)
+            return "to_date('%s','yyyy-mm-dd')" % obj
+        elif fieldtype == 'datetime':
+            if isinstance(obj, datetime.datetime):
+                obj = obj.isoformat()[:19].replace('T',' ')
+            elif isinstance(obj, datetime.date):
+                obj = obj.isoformat()[:10]+' 00:00:00'
+            else:
+                obj = str(obj)
+            return "to_date('%s','yyyy-mm-dd hh24:mi:ss')" % obj
+        return None
+
+    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8',
+                 credential_decoder=lambda x:x, driver_args={},
+                    adapter_args={}):
+        self.db = db
+        self.dbengine = "informix"
+        self.uri = uri
+        self.pool_size = pool_size
+        self.folder = folder
+        self.db_codec = db_codec
+        self.find_or_make_work_folder()
+        uri = uri.split('://')[1]
+        m = re.compile('^(?P<user>[^:@]+)(\:(?P<password>[^@]*))?@(?P<host>[^\:/]+)(\:(?P<port>[0-9]+))?/(?P<db>.+)$').match(uri)
+        if not m:
+            raise SyntaxError, \
+                "Invalid URI string in DAL: %s" % self.uri
+        user = credential_decoder(m.group('user'))
+        if not user:
+            raise SyntaxError, 'User required'
+        password = credential_decoder(m.group('password'))
+        if not password:
+            password = ''
+        host = m.group('host')
+        if not host:
+            raise SyntaxError, 'Host name required'
+        db = m.group('db')
+        if not db:
+            raise SyntaxError, 'Database name required'
+        user = credential_decoder(user)
+        password = credential_decoder(password)
+        dsn = '%s@%s' % (db,host)
+        driver_args.update(dict(user=user,password=password,autocommit=True))
+        def connect(dsn=dsn,driver_args=driver_args):
+            return self.driver.connect(dsn,**driver_args)
+        self.pool_connection(connect)
+        self.cursor = self.connection.cursor()
+
+    def execute(self,command):
+        if command[-1:]==';':
+            command = command[:-1]
+        return self.log_execute(command)
+
+    def lastrowid(self,table):
+        return self.cursor.sqlerrd[1]
+
+    def integrity_error_class(self):
+        return informixdb.IntegrityError
+
+
+class DB2Adapter(BaseAdapter):
+
+    driver = globals().get('pyodbc',None)
+
+    types = {
+        'boolean': 'CHAR(1)',
+        'string': 'VARCHAR(%(length)s)',
+        'text': 'CLOB',
+        'password': 'VARCHAR(%(length)s)',
+        'blob': 'BLOB',
+        'upload': 'VARCHAR(%(length)s)',
+        'integer': 'INT',
+        'double': 'DOUBLE',
+        'decimal': 'NUMERIC(%(precision)s,%(scale)s)',
+        'date': 'DATE',
+        'time': 'TIME',
+        'datetime': 'TIMESTAMP',
+        'id': 'INTEGER GENERATED ALWAYS AS IDENTITY PRIMARY KEY NOT NULL',
+        'reference': 'INT, FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s',
+        'reference FK': ', CONSTRAINT FK_%(constraint_name)s FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s',
+        'reference TFK': ' CONSTRAINT FK_%(foreign_table)s_PK FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_table)s (%(foreign_key)s) ON DELETE %(on_delete_action)s',
+        'list:integer': 'CLOB',
+        'list:string': 'CLOB',
+        'list:reference': 'CLOB',
+        }
+
+    def LEFT_JOIN(self):
+        return 'LEFT OUTER JOIN'
+
+    def RANDOM(self):
+        return 'RAND()'
+
+    def select_limitby(self, sql_s, sql_f, sql_t, sql_w, sql_o, limitby):
+        if limitby:
+            (lmin, lmax) = limitby
+            sql_o += ' FETCH FIRST %i ROWS ONLY' % lmax
+        return 'SELECT %s %s FROM %s%s%s;' % (sql_s, sql_f, sql_t, sql_w, sql_o)
+
+    def represent_exceptions(self, obj, fieldtype):
+        if fieldtype == 'blob':
+            obj = base64.b64encode(str(obj))
+            return "BLOB('%s')" % obj
+        elif fieldtype == 'datetime':
+            if isinstance(obj, datetime.datetime):
+                obj = obj.isoformat()[:19].replace('T','-').replace(':','.')
+            elif isinstance(obj, datetime.date):
+                obj = obj.isoformat()[:10]+'-00.00.00'
+            return "'%s'" % obj
+        return None
+
+    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8',
+                 credential_decoder=lambda x:x, driver_args={},
+                    adapter_args={}):
+        self.db = db
+        self.dbengine = "db2"
+        self.uri = uri
+        self.pool_size = pool_size
+        self.folder = folder
+        self.db_codec = db_codec
+        self.find_or_make_work_folder()
+        cnxn = uri.split('://', 1)[1]
+        def connect(cnxn=cnxn,driver_args=driver_args):
+            return self.driver.connect(cnxn,**driver_args)
+        self.pool_connection(connect)
+        self.cursor = self.connection.cursor()
+
+    def execute(self,command):
+        if command[-1:]==';':
+            command = command[:-1]
+        return self.log_execute(command)
+
+    def lastrowid(self,table):
+        self.execute('SELECT DISTINCT IDENTITY_VAL_LOCAL() FROM %s;' % table)
+        return int(self.cursor.fetchone()[0])
+
+    def rowslice(self,rows,minimum=0,maximum=None):
+        if maximum is None:
+            return rows[minimum:]
+        return rows[minimum:maximum]
+
+
+class TeradataAdapter(DB2Adapter):
+
+    driver = globals().get('pyodbc',None)
+
+    types = {
+        'boolean': 'CHAR(1)',
+        'string': 'VARCHAR(%(length)s)',
+        'text': 'CLOB',
+        'password': 'VARCHAR(%(length)s)',
+        'blob': 'BLOB',
+        'upload': 'VARCHAR(%(length)s)',
+        'integer': 'INT',
+        'double': 'DOUBLE',
+        'decimal': 'NUMERIC(%(precision)s,%(scale)s)',
+        'date': 'DATE',
+        'time': 'TIME',
+        'datetime': 'TIMESTAMP',
+        'id': 'INTEGER GENERATED ALWAYS AS IDENTITY PRIMARY KEY NOT NULL',
+        'reference': 'INT, FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s',
+        'reference FK': ', CONSTRAINT FK_%(constraint_name)s FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s',
+        'reference TFK': ' CONSTRAINT FK_%(foreign_table)s_PK FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_table)s (%(foreign_key)s) ON DELETE %(on_delete_action)s',
+        'list:integer': 'CLOB',
+        'list:string': 'CLOB',
+        'list:reference': 'CLOB',
+        }
+
+
+    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8',
+                 credential_decoder=lambda x:x, driver_args={},
+                    adapter_args={}):
+        self.db = db
+        self.dbengine = "teradata"
+        self.uri = uri
+        self.pool_size = pool_size
+        self.folder = folder
+        self.db_codec = db_codec
+        self.find_or_make_work_folder()
+        cnxn = uri.split('://', 1)[1]
+        def connect(cnxn=cnxn,driver_args=driver_args):
+            return self.driver.connect(cnxn,**driver_args)
+        self.pool_connection(connect)
+        self.cursor = self.connection.cursor()
+
+
+INGRES_SEQNAME='ii***lineitemsequence' # NOTE invalid database object name
+                                       # (ANSI-SQL wants this form of name
+                                       # to be a delimited identifier)
+
+class IngresAdapter(BaseAdapter):
+
+    driver = globals().get('ingresdbi',None)
+
+    types = {
+        'boolean': 'CHAR(1)',
+        'string': 'VARCHAR(%(length)s)',
+        'text': 'CLOB',
+        'password': 'VARCHAR(%(length)s)',  ## Not sure what this contains utf8 or nvarchar. Or even bytes?
+        'blob': 'BLOB',
+        'upload': 'VARCHAR(%(length)s)',  ## FIXME utf8 or nvarchar... or blob? what is this type?
+        'integer': 'INTEGER4', # or int8...
+        'double': 'FLOAT8',
+        'decimal': 'NUMERIC(%(precision)s,%(scale)s)',
+        'date': 'ANSIDATE',
+        'time': 'TIME WITHOUT TIME ZONE',
+        'datetime': 'TIMESTAMP WITHOUT TIME ZONE',
+        'id': 'integer4 not null unique with default next value for %s' % INGRES_SEQNAME,
+        'reference': 'integer4, FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s',
+        'reference FK': ', CONSTRAINT FK_%(constraint_name)s FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s',
+        'reference TFK': ' CONSTRAINT FK_%(foreign_table)s_PK FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_table)s (%(foreign_key)s) ON DELETE %(on_delete_action)s', ## FIXME TODO
+        'list:integer': 'CLOB',
+        'list:string': 'CLOB',
+        'list:reference': 'CLOB',
+        }
+
+    def LEFT_JOIN(self):
+        return 'LEFT OUTER JOIN'
+
+    def RANDOM(self):
+        return 'RANDOM()'
+
+    def select_limitby(self, sql_s, sql_f, sql_t, sql_w, sql_o, limitby):
+        if limitby:
+            (lmin, lmax) = limitby
+            fetch_amt = lmax - lmin
+            if fetch_amt:
+                sql_s += ' FIRST %d ' % (fetch_amt, )
+            if lmin:
+                # Requires Ingres 9.2+
+                sql_o += ' OFFSET %d' % (lmin, )
+        return 'SELECT %s %s FROM %s%s%s;' % (sql_s, sql_f, sql_t, sql_w, sql_o)
+
+    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8',
+                 credential_decoder=lambda x:x, driver_args={},
+                    adapter_args={}):
+        self.db = db
+        self.dbengine = "ingres"
+        self.uri = uri
+        self.pool_size = pool_size
+        self.folder = folder
+        self.db_codec = db_codec
+        self.find_or_make_work_folder()
+        connstr = self._uri.split(':', 1)[1]
+        # Simple URI processing
+        connstr = connstr.lstrip()
+        while connstr.startswith('/'):
+            connstr = connstr[1:]
+        database_name=connstr # Assume only (local) dbname is passed in
+        vnode = '(local)'
+        servertype = 'ingres'
+        trace = (0, None) # No tracing
+        driver_args.update(dict(database=database_name,
+                                   vnode=vnode,
+                                   servertype=servertype,
+                                   trace=trace))
+        def connect(driver_args=driver_args):
+            return self.driver.connect(**driver_args)
+        self.pool_connection(connect)
+        self.cursor = self.connection.cursor()
+
+    def create_sequence_and_triggers(self, query, table, **args):
+        # post create table auto inc code (if needed)
+        # modify table to btree for performance....
+        # Older Ingres releases could use rule/trigger like Oracle above.
+        if hasattr(table,'_primarykey'):
+            modify_tbl_sql = 'modify %s to btree unique on %s' % \
+                (table._tablename,
+                 ', '.join(["'%s'" % x for x in table.primarykey]))
+            self.execute(modify_tbl_sql)
+        else:
+            tmp_seqname='%s_iisq' % table._tablename
+            query=query.replace(INGRES_SEQNAME, tmp_seqname)
+            self.execute('create sequence %s' % tmp_seqname)
+            self.execute(query)
+            self.execute('modify %s to btree unique on %s' % (table._tablename, 'id'))
+
+
+    def lastrowid(self,table):
+        tmp_seqname='%s_iisq' % table
+        self.execute('select current value for %s' % tmp_seqname)
+        return int(self.cursor.fetchone()[0]) # don't really need int type cast here...
+
+    def integrity_error_class(self):
+        return ingresdbi.IntegrityError
+
+
+class IngresUnicodeAdapter(IngresAdapter):
+    types = {
+        'boolean': 'CHAR(1)',
+        'string': 'NVARCHAR(%(length)s)',
+        'text': 'NCLOB',
+        'password': 'NVARCHAR(%(length)s)',  ## Not sure what this contains utf8 or nvarchar. Or even bytes?
+        'blob': 'BLOB',
+        'upload': 'VARCHAR(%(length)s)',  ## FIXME utf8 or nvarchar... or blob? what is this type?
+        'integer': 'INTEGER4', # or int8...
+        'double': 'FLOAT8',
+        'decimal': 'NUMERIC(%(precision)s,%(scale)s)',
+        'date': 'ANSIDATE',
+        'time': 'TIME WITHOUT TIME ZONE',
+        'datetime': 'TIMESTAMP WITHOUT TIME ZONE',
+        'id': 'integer4 not null unique with default next value for %s'% INGRES_SEQNAME,
+        'reference': 'integer4, FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s',
+        'reference FK': ', CONSTRAINT FK_%(constraint_name)s FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s',
+        'reference TFK': ' CONSTRAINT FK_%(foreign_table)s_PK FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_table)s (%(foreign_key)s) ON DELETE %(on_delete_action)s', ## FIXME TODO
+        'list:integer': 'NCLOB',
+        'list:string': 'NCLOB',
+        'list:reference': 'NCLOB',
+        }
+
+class SAPDBAdapter(BaseAdapter):
+
+    driver = globals().get('sapdb',None)
+    support_distributed_transaction = False
+    types = {
+        'boolean': 'CHAR(1)',
+        'string': 'VARCHAR(%(length)s)',
+        'text': 'LONG',
+        'password': 'VARCHAR(%(length)s)',
+        'blob': 'LONG',
+        'upload': 'VARCHAR(%(length)s)',
+        'integer': 'INT',
+        'double': 'FLOAT',
+        'decimal': 'FIXED(%(precision)s,%(scale)s)',
+        'date': 'DATE',
+        'time': 'TIME',
+        'datetime': 'TIMESTAMP',
+        'id': 'INT PRIMARY KEY',
+        'reference': 'INT, FOREIGN KEY (%(field_name)s) REFERENCES %(foreign_key)s ON DELETE %(on_delete_action)s',
+        'list:integer': 'LONG',
+        'list:string': 'LONG',
+        'list:reference': 'LONG',
+        }
+
+    def sequence_name(self,table):
+        return '%s_id_Seq' % table
+
+    def select_limitby(self, sql_s, sql_f, sql_t, sql_w, sql_o, limitby):
+        if limitby:
+            (lmin, lmax) = limitby
+            if len(sql_w) > 1:
+                sql_w_row = sql_w + ' AND w_row > %i' % lmin
+            else:
+                sql_w_row = 'WHERE w_row > %i' % lmin
+            return '%s %s FROM (SELECT w_tmp.*, ROWNO w_row FROM (SELECT %s FROM %s%s%s) w_tmp WHERE ROWNO=%i) %s %s %s;' % (sql_s, sql_f, sql_f, sql_t, sql_w, sql_o, lmax, sql_t, sql_w_row, sql_o)
+        return 'SELECT %s %s FROM %s%s%s;' % (sql_s, sql_f, sql_t, sql_w, sql_o)
+
+    def create_sequence_and_triggers(self, query, table, **args):
+        # following lines should only be executed if table._sequence_name does not exist
+        self.execute('CREATE SEQUENCE %s;' % table._sequence_name)
+        self.execute("ALTER TABLE %s ALTER COLUMN %s SET DEFAULT NEXTVAL('%s');" \
+                         % (table._tablename, table._id.name, table._sequence_name))
+        self.execute(query)
+
+    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8',
+                 credential_decoder=lambda x:x, driver_args={},
+                    adapter_args={}):
+        self.db = db
+        self.dbengine = "sapdb"
+        self.uri = uri
+        self.pool_size = pool_size
+        self.folder = folder
+        self.db_codec = db_codec
+        self.find_or_make_work_folder()
+        uri = uri.split('://')[1]
+        m = re.compile('^(?P<user>[^:@]+)(\:(?P<password>[^@]*))?@(?P<host>[^\:@/]+)(\:(?P<port>[0-9]+))?/(?P<db>[^\?]+)(\?sslmode=(?P<sslmode>.+))?$').match(uri)
+        if not m:
+            raise SyntaxError, "Invalid URI string in DAL"
+        user = credential_decoder(m.group('user'))
+        if not user:
+            raise SyntaxError, 'User required'
+        password = credential_decoder(m.group('password'))
+        if not password:
+            password = ''
+        host = m.group('host')
+        if not host:
+            raise SyntaxError, 'Host name required'
+        db = m.group('db')
+        if not db:
+            raise SyntaxError, 'Database name required'
+        def connect(user=user,password=password,database=db,
+                    host=host,driver_args=driver_args):
+            return self.driver.Connection(user,password,database,
+                                          host,**driver_args)
+        self.pool_connection(connect)
+        # self.connection.set_client_encoding('UTF8')
+        self.cursor = self.connection.cursor()
+
+    def lastrowid(self,table):
+        self.execute("select %s.NEXTVAL from dual" % table._sequence_name)
+        return int(self.cursor.fetchone()[0])
+
+class CubridAdapter(MySQLAdapter):
+
+    driver = globals().get('cubriddb',None)
+
+    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8',
+                 credential_decoder=lambda x:x, driver_args={},
+                 adapter_args={}):
+        self.db = db
+        self.dbengine = "cubrid"
+        self.uri = uri
+        self.pool_size = pool_size
+        self.folder = folder
+        self.db_codec = db_codec
+        self.find_or_make_work_folder()
+        uri = uri.split('://')[1]
+        m = re.compile('^(?P<user>[^:@]+)(\:(?P<password>[^@]*))?@(?P<host>[^\:/]+)(\:(?P<port>[0-9]+))?/(?P<db>[^?]+)(\?set_encoding=(?P<charset>\w+))?$').match(uri)
+        if not m:
+            raise SyntaxError, \
+                "Invalid URI string in DAL: %s" % self.uri
+        user = credential_decoder(m.group('user'))
+        if not user:
+            raise SyntaxError, 'User required'
+        password = credential_decoder(m.group('password'))
+        if not password:
+            password = ''
+        host = m.group('host')
+        if not host:
+            raise SyntaxError, 'Host name required'
+        db = m.group('db')
+        if not db:
+            raise SyntaxError, 'Database name required'
+        port = int(m.group('port') or '30000')
+        charset = m.group('charset') or 'utf8'
+        user=credential_decoder(user),
+        passwd=credential_decoder(password),
+        def connect(host,port,db,user,passwd,driver_args=driver_args):
+            return self.driver.connect(host,port,db,user,passwd,**driver_args)
+        self.pool_connection(connect)
+        self.cursor = self.connection.cursor()
+        self.execute('SET FOREIGN_KEY_CHECKS=1;')
+        self.execute("SET sql_mode='NO_BACKSLASH_ESCAPES';")
+
+
+######## GAE MySQL ##########
+
+class DatabaseStoredFile:
+
+    web2py_filesystem = False
+
+    def __init__(self,db,filename,mode):
+        if db._adapter.dbengine != 'mysql':
+            raise RuntimeError, "only MySQL can store metadata .table files in database for now"
+        self.db = db
+        self.filename = filename
+        self.mode = mode
+        if not self.web2py_filesystem:
+            self.db.executesql("CREATE TABLE IF NOT EXISTS web2py_filesystem (path VARCHAR(512), content LONGTEXT, PRIMARY KEY(path) ) ENGINE=InnoDB;")
+            DatabaseStoredFile.web2py_filesystem = True
+        self.p=0
+        self.data = ''
+        if mode in ('r','rw','a'):
+            query = "SELECT content FROM web2py_filesystem WHERE path='%s'" % filename
+            rows = self.db.executesql(query)
+            if rows:
+                self.data = rows[0][0]
+            elif os.path.exists(filename):
+                datafile = open(filename, 'r')
+                try:
+                    self.data = datafile.read()
+                finally:
+                    datafile.close()
+            elif mode in ('r','rw'):
+                raise RuntimeError, "File %s does not exist" % filename
+
+    def read(self, bytes):
+        data = self.data[self.p:self.p+bytes]
+        self.p += len(data)
+        return data
+
+    def readline(self):
+        i = self.data.find('\n',self.p)+1
+        if i>0:
+            data, self.p = self.data[self.p:i], i
+        else:
+            data, self.p = self.data[self.p:], len(self.data)
+        return data
+
+    def write(self,data):
+        self.data += data
+
+    def close(self):
+        self.db.executesql("DELETE FROM web2py_filesystem WHERE path='%s'" % self.filename)
+        query = "INSERT INTO web2py_filesystem(path,content) VALUES ('%s','%s')" % \
+            (self.filename, self.data.replace("'","''"))
+        self.db.executesql(query)
+        self.db.commit()
+
+    @staticmethod
+    def exists(db,filename):
+        if os.path.exists(filename):
+            return True
+        query = "SELECT path FROM web2py_filesystem WHERE path='%s'" % filename
+        if db.executesql(query):
+            return True
+        return False
+
+
+class UseDatabaseStoredFile:
+
+    def file_exists(self, filename):
+        return DatabaseStoredFile.exists(self.db,filename)
+
+    def file_open(self, filename, mode='rb', lock=True):
+        return DatabaseStoredFile(self.db,filename,mode)
+
+    def file_close(self, fileobj, unlock=True):
+        fileobj.close()
+
+    def file_delete(self,filename):
+        query = "DELETE FROM web2py_filesystem WHERE path='%s'" % filename
+        self.db.executesql(query)
+        self.db.commit()
+
+class GoogleSQLAdapter(UseDatabaseStoredFile,MySQLAdapter):
+
+    def __init__(self, db, uri='google:sql://realm:domain/database', pool_size=0,
+                 folder=None, db_codec='UTF-8', check_reserved=None,
+                 migrate=True, fake_migrate=False,
+                 credential_decoder = lambda x:x, driver_args={},
+                    adapter_args={}):
+
+        self.db = db
+        self.dbengine = "mysql"
+        self.uri = uri
+        self.pool_size = pool_size
+        self.folder = folder
+        self.db_codec = db_codec
+        self.folder = folder or '$HOME/'+thread.folder.split('/applications/',1)[1]
+
+        m = re.compile('^(?P<instance>.*)/(?P<db>.*)$').match(self.uri[len('google:sql://'):])
+        if not m:
+            raise SyntaxError, "Invalid URI string in SQLDB: %s" % self._uri
+        instance = credential_decoder(m.group('instance'))
+        db = credential_decoder(m.group('db'))
+        driver_args['instance'] = instance
+        if not migrate:
+            driver_args['database'] = db
+        def connect(driver_args=driver_args):
+            return rdbms.connect(**driver_args)
+        self.pool_connection(connect)
+        self.cursor = self.connection.cursor()
+        if migrate:
+            # self.execute('DROP DATABASE %s' % db)
+            self.execute('CREATE DATABASE IF NOT EXISTS %s' % db)
+            self.execute('USE %s' % db)
+        self.execute("SET FOREIGN_KEY_CHECKS=1;")
+        self.execute("SET sql_mode='NO_BACKSLASH_ESCAPES';")
+
+class NoSQLAdapter(BaseAdapter):
+
+    @staticmethod
+    def to_unicode(obj):
+        if isinstance(obj, str):
+            return obj.decode('utf8')
+        elif not isinstance(obj, unicode):
+            return unicode(obj)
+        return obj
+
+    def represent(self, obj, fieldtype):
+        if isinstance(obj,CALLABLETYPES):
+            obj = obj()
+        if isinstance(fieldtype, SQLCustomType):
+            return fieldtype.encoder(obj)
+        if isinstance(obj, (Expression, Field)):
+            raise SyntaxError, "non supported on GAE"
+        if self.dbengine=='google:datastore' in globals():
+            if isinstance(fieldtype, gae.Property):
+                return obj
+        if fieldtype.startswith('list:'):
+            if not obj:
+                obj = []
+            if not isinstance(obj, (list, tuple)):
+                obj = [obj]
+        if obj == '' and  not fieldtype[:2] in ['st','te','pa','up']:
+            return None
+        if obj != None:
+            if isinstance(obj, list) and not fieldtype.startswith('list'):
+                obj = [self.represent(o, fieldtype) for o in obj]
+            elif fieldtype in ('integer','id'):
+                obj = long(obj)
+            elif fieldtype == 'double':
+                obj = float(obj)
+            elif fieldtype.startswith('reference'):
+                if isinstance(obj, (Row, Reference)):
+                    obj = obj['id']
+                obj = long(obj)
+            elif fieldtype == 'boolean':
+                if obj and not str(obj)[0].upper() == 'F':
+                    obj = True
+                else:
+                    obj = False
+            elif fieldtype == 'date':
+                if not isinstance(obj, datetime.date):
+                    (y, m, d) = map(int,str(obj).strip().split('-'))
+                    obj = datetime.date(y, m, d)
+                elif isinstance(obj,datetime.datetime):
+                    (y, m, d) = (obj.year, obj.month, obj.day)
+                    obj = datetime.date(y, m, d)
+            elif fieldtype == 'time':
+                if not isinstance(obj, datetime.time):
+                    time_items = map(int,str(obj).strip().split(':')[:3])
+                    if len(time_items) == 3:
+                        (h, mi, s) = time_items
+                    else:
+                        (h, mi, s) = time_items + [0]
+                    obj = datetime.time(h, mi, s)
+            elif fieldtype == 'datetime':
+                if not isinstance(obj, datetime.datetime):
+                    (y, m, d) = map(int,str(obj)[:10].strip().split('-'))
+                    time_items = map(int,str(obj)[11:].strip().split(':')[:3])
+                    while len(time_items)<3:
+                        time_items.append(0)
+                    (h, mi, s) = time_items
+                    obj = datetime.datetime(y, m, d, h, mi, s)
+            elif fieldtype == 'blob':
+                pass
+            elif fieldtype.startswith('list:string'):
+                return map(self.to_unicode,obj)
+            elif fieldtype.startswith('list:'):
+                return map(int,obj)
+            else:
+                obj = self.to_unicode(obj)
+        return obj
+
+    def _insert(self,table,fields):
+        return 'insert %s in %s' % (fields, table)
+
+    def _count(self,query,distinct=None):
+        return 'count %s' % repr(query)
+
+    def _select(self,query,fields,attributes):
+        return 'select %s where %s' % (repr(fields), repr(query))
+
+    def _delete(self,tablename, query):
+        return 'delete %s where %s' % (repr(tablename),repr(query))
+
+    def _update(self,tablename,query,fields):
+        return 'update %s (%s) where %s' % (repr(tablename),
+                                            repr(fields),repr(query))
+
+    def commit(self):
+        """
+        remember: no transactions on many NoSQL
+        """
+        pass
+
+    def rollback(self):
+        """
+        remember: no transactions on many NoSQL
+        """
+        pass
+
+    def close(self):
+        """
+        remember: no transactions on many NoSQL
+        """
+        pass
+
+
+    # these functions should never be called!
+    def OR(self,first,second): raise SyntaxError, "Not supported"
+    def AND(self,first,second): raise SyntaxError, "Not supported"
+    def AS(self,first,second): raise SyntaxError, "Not supported"
+    def ON(self,first,second): raise SyntaxError, "Not supported"
+    def STARTSWITH(self,first,second=None): raise SyntaxError, "Not supported"
+    def ENDSWITH(self,first,second=None): raise SyntaxError, "Not supported"
+    def ADD(self,first,second): raise SyntaxError, "Not supported"
+    def SUB(self,first,second): raise SyntaxError, "Not supported"
+    def MUL(self,first,second): raise SyntaxError, "Not supported"
+    def DIV(self,first,second): raise SyntaxError, "Not supported"
+    def LOWER(self,first): raise SyntaxError, "Not supported"
+    def UPPER(self,first): raise SyntaxError, "Not supported"
+    def EXTRACT(self,first,what): raise SyntaxError, "Not supported"
+    def AGGREGATE(self,first,what): raise SyntaxError, "Not supported"
+    def LEFT_JOIN(self): raise SyntaxError, "Not supported"
+    def RANDOM(self): raise SyntaxError, "Not supported"
+    def SUBSTRING(self,field,parameters):  raise SyntaxError, "Not supported"
+    def PRIMARY_KEY(self,key):  raise SyntaxError, "Not supported"
+    def LIKE(self,first,second): raise SyntaxError, "Not supported"
+    def drop(self,table,mode):  raise SyntaxError, "Not supported"
+    def alias(self,table,alias): raise SyntaxError, "Not supported"
+    def migrate_table(self,*a,**b): raise SyntaxError, "Not supported"
+    def distributed_transaction_begin(self,key): raise SyntaxError, "Not supported"
+    def prepare(self,key): raise SyntaxError, "Not supported"
+    def commit_prepared(self,key): raise SyntaxError, "Not supported"
+    def rollback_prepared(self,key): raise SyntaxError, "Not supported"
+    def concat_add(self,table): raise SyntaxError, "Not supported"
+    def constraint_name(self, table, fieldname): raise SyntaxError, "Not supported"
+    def create_sequence_and_triggers(self, query, table, **args): pass
+    def log_execute(self,*a,**b): raise SyntaxError, "Not supported"
+    def execute(self,*a,**b): raise SyntaxError, "Not supported"
+    def represent_exceptions(self, obj, fieldtype): raise SyntaxError, "Not supported"
+    def lastrowid(self,table): raise SyntaxError, "Not supported"
+    def integrity_error_class(self): raise SyntaxError, "Not supported"
+    def rowslice(self,rows,minimum=0,maximum=None): raise SyntaxError, "Not supported"
+
+
+class GAEF(object):
+    def __init__(self,name,op,value,apply):
+        self.name=name=='id' and '__key__' or name
+        self.op=op
+        self.value=value
+        self.apply=apply
+    def __repr__(self):
+        return '(%s %s %s:%s)' % (self.name, self.op, repr(self.value), type(self.value))
+
+class GoogleDatastoreAdapter(NoSQLAdapter):
+    uploads_in_blob = True
+    types = {}
+
+    def file_exists(self, filename): pass
+    def file_open(self, filename, mode='rb', lock=True): pass
+    def file_close(self, fileobj, unlock=True): pass
+
+    def __init__(self,db,uri,pool_size=0,folder=None,db_codec ='UTF-8',
+                 credential_decoder=lambda x:x, driver_args={},
+                    adapter_args={}):
+        self.types.update({
+                'boolean': gae.BooleanProperty,
+                'string': (lambda: gae.StringProperty(multiline=True)),
+                'text': gae.TextProperty,
+                'password': gae.StringProperty,
+                'blob': gae.BlobProperty,
+                'upload': gae.StringProperty,
+                'integer': gae.IntegerProperty,
+                'double': gae.FloatProperty,
+                'decimal': GAEDecimalProperty,
+                'date': gae.DateProperty,
+                'time': gae.TimeProperty,
+                'datetime': gae.DateTimeProperty,
+                'id': None,
+                'reference': gae.IntegerProperty,
+                'list:string': (lambda: gae.StringListProperty(default=None)),
+                'list:integer': (lambda: gae.ListProperty(int,default=None)),
+                'list:reference': (lambda: gae.ListProperty(int,default=None)),
+        })
+        self.db = db
+        self.uri = uri
+        self.dbengine = 'google:datastore'
+        self.folder = folder
+        db['_lastsql'] = ''
+        self.db_codec = 'UTF-8'
+        self.pool_size = 0
+        match = re.compile('.*://(?P<namespace>.+)').match(uri)
+        if match:
+            namespace_manager.set_namespace(match.group('namespace'))
+
+    def create_table(self,table,migrate=True,fake_migrate=False, polymodel=None):
+        myfields = {}
+        for k in table.fields:
+            if isinstance(polymodel,Table) and k in polymodel.fields():
+                continue
+            field = table[k]
+            attr = {}
+            if isinstance(field.type, SQLCustomType):
+                ftype = self.types[field.type.native or field.type.type](**attr)
+            elif isinstance(field.type, gae.Property):
+                ftype = field.type
+            elif field.type.startswith('id'):
+                continue
+            elif field.type.startswith('decimal'):
+                precision, scale = field.type[7:].strip('()').split(',')
+                precision = int(precision)
+                scale = int(scale)
+                ftype = GAEDecimalProperty(precision, scale, **attr)
+            elif field.type.startswith('reference'):
+                if field.notnull:
+                    attr = dict(required=True)
+                referenced = field.type[10:].strip()
+                ftype = self.types[field.type[:9]](table._db[referenced])
+            elif field.type.startswith('list:reference'):
+                if field.notnull:
+                    attr = dict(required=True)
+                referenced = field.type[15:].strip()
+                ftype = self.types[field.type[:14]](**attr)
+            elif field.type.startswith('list:'):
+                ftype = self.types[field.type](**attr)
+            elif not field.type in self.types\
+                 or not self.types[field.type]:
+                raise SyntaxError, 'Field: unknown field type: %s' % field.type
+            else:
+                ftype = self.types[field.type](**attr)
+            myfields[field.name] = ftype
+        if not polymodel:
+            table._tableobj = classobj(table._tablename, (gae.Model, ), myfields)
+        elif polymodel==True:
+            table._tableobj = classobj(table._tablename, (PolyModel, ), myfields)
+        elif isinstance(polymodel,Table):
+            table._tableobj = classobj(table._tablename, (polymodel._tableobj, ), myfields)
+        else:
+            raise SyntaxError, "polymodel must be None, True, a table or a tablename"
+        return None
+
+    def expand(self,expression,field_type=None):
+        if isinstance(expression,Field):
+            if expression.type in ('text','blob'):
+                raise SyntaxError, 'AppEngine does not index by: %s' % expression.type
+            return expression.name
+        elif isinstance(expression, (Expression, Query)):
+            if not expression.second is None:
+                return expression.op(expression.first, expression.second)
+            elif not expression.first is None:
+                return expression.op(expression.first)
+            else:
+                return expression.op()
+        elif field_type:
+                return self.represent(expression,field_type)
+        elif isinstance(expression,(list,tuple)):
+            return ','.join([self.represent(item,field_type) for item in expression])
+        else:
+            return str(expression)
+
+    ### TODO from gql.py Expression
+    def AND(self,first,second):
+        a = self.expand(first)
+        b = self.expand(second)
+        if b[0].name=='__key__' and a[0].name!='__key__':
+            return b+a
+        return a+b
+
+    def EQ(self,first,second=None):
+        if isinstance(second, Key):
+            return [GAEF(first.name,'=',second,lambda a,b:a==b)]
+        return [GAEF(first.name,'=',self.represent(second,first.type),lambda a,b:a==b)]
+
+    def NE(self,first,second=None):
+        if first.type != 'id':
+            return [GAEF(first.name,'!=',self.represent(second,first.type),lambda a,b:a!=b)]
+        else:
+            second = Key.from_path(first._tablename, long(second))
+            return [GAEF(first.name,'!=',second,lambda a,b:a!=b)]
+
+    def LT(self,first,second=None):
+        if first.type != 'id':
+            return [GAEF(first.name,'<',self.represent(second,first.type),lambda a,b:a<b)]
+        else:
+            second = Key.from_path(first._tablename, long(second))
+            return [GAEF(first.name,'<',second,lambda a,b:a<b)]
+
+    def LE(self,first,second=None):
+        if first.type != 'id':
+            return [GAEF(first.name,'<=',self.represent(second,first.type),lambda a,b:a<=b)]
+        else:
+            second = Key.from_path(first._tablename, long(second))
+            return [GAEF(first.name,'<=',second,lambda a,b:a<=b)]
+
+    def GT(self,first,second=None):
+        if first.type != 'id' or second==0 or second == '0':
+            return [GAEF(first.name,'>',self.represent(second,first.type),lambda a,b:a>b)]
+        else:
+            second = Key.from_path(first._tablename, long(second))
+            return [GAEF(first.name,'>',second,lambda a,b:a>b)]
+
+    def GE(self,first,second=None):
+        if first.type != 'id':
+            return [GAEF(first.name,'>=',self.represent(second,first.type),lambda a,b:a>=b)]
+        else:
+            second = Key.from_path(first._tablename, long(second))
+            return [GAEF(first.name,'>=',second,lambda a,b:a>=b)]
+
+    def INVERT(self,first):
+        return '-%s' % first.name
+
+    def COMMA(self,first,second):
+        return '%s, %s' % (self.expand(first),self.expand(second))
+
+    def BELONGS(self,first,second=None):
+        if not isinstance(second,(list, tuple)):
+            raise SyntaxError, "Not supported"
+        if first.type != 'id':
+            return [GAEF(first.name,'in',self.represent(second,first.type),lambda a,b:a in b)]
+        else:
+            second = [Key.from_path(first._tablename, i) for i in second]
+            return [GAEF(first.name,'in',second,lambda a,b:a in b)]
+
+    def CONTAINS(self,first,second):
+        if not first.type.startswith('list:'):
+            raise SyntaxError, "Not supported"
+        return [GAEF(first.name,'=',self.expand(second,first.type[5:]),lambda a,b:a in b)]
+
+    def NOT(self,first):
+        nops = { self.EQ: self.NE,
+                 self.NE: self.EQ,
+                 self.LT: self.GE,
+                 self.GT: self.LE,
+                 self.LE: self.GT,
+                 self.GE: self.LT}
+        if not isinstance(first,Query):
+            raise SyntaxError, "Not suported"
+        nop = nops.get(first.op,None)
+        if not nop:
+            raise SyntaxError, "Not suported %s" % first.op.__name__
+        first.op = nop
+        return self.expand(first)
+
+    def truncate(self,table,mode):
+        self.db(table._id > 0).delete()
+
+    def select_raw(self,query,fields=[],attributes={}):
+        new_fields = []
+        for item in fields:
+            if isinstance(item,SQLALL):
+                new_fields += item.table
+            else:
+                new_fields.append(item)
+        fields = new_fields
+        if query:
+            tablename = self.get_table(query)
+        elif fields:
+            tablename = fields[0].tablename
+            query = fields[0].table._id>0
+        else:
+            raise SyntaxError, "Unable to determine a tablename"
+        query = self.filter_tenant(query,[tablename])
+        tableobj = self.db[tablename]._tableobj
+        items = tableobj.all()
+        filters = self.expand(query)
+        for filter in filters:
+            if filter.name=='__key__' and filter.op=='>' and filter.value==0:
+                continue
+            elif filter.name=='__key__' and filter.op=='=':
+                if filter.value==0:
+                    items = []
+                elif isinstance(filter.value, Key):
+                    item = tableobj.get(filter.value)
+                    items = (item and [item]) or []
+                else:
+                    item = tableobj.get_by_id(filter.value)
+                    items = (item and [item]) or []
+            elif isinstance(items,list): # i.e. there is a single record!
+                items = [i for i in items if filter.apply(getattr(item,filter.name),
+                                                          filter.value)]
+            else:
+                if filter.name=='__key__': items.order('__key__')
+                items = items.filter('%s %s' % (filter.name,filter.op),filter.value)
+        if not isinstance(items,list):
+            if attributes.get('left', None):
+                raise SyntaxError, 'Set: no left join in appengine'
+            if attributes.get('groupby', None):
+                raise SyntaxError, 'Set: no groupby in appengine'
+            orderby = attributes.get('orderby', False)
+            if orderby:
+                ### THIS REALLY NEEDS IMPROVEMENT !!!
+                if isinstance(orderby, (list, tuple)):
+                    orderby = xorify(orderby)
+                if isinstance(orderby,Expression):
+                    orderby = self.expand(orderby)
+                orders = orderby.split(', ')
+                for order in orders:
+                    order={'-id':'-__key__','id':'__key__'}.get(order,order)
+                    items = items.order(order)
+            if attributes.get('limitby', None):
+                (lmin, lmax) = attributes['limitby']
+                (limit, offset) = (lmax - lmin, lmin)
+                items = items.fetch(limit, offset=offset)
+        fields = self.db[tablename].fields
+        return (items, tablename, fields)
+
+    def select(self,query,fields,attributes):
+        (items, tablename, fields) = self.select_raw(query,fields,attributes)
+        # self.db['_lastsql'] = self._select(query,fields,attributes)
+        rows = [
+            [t=='id' and int(item.key().id()) or getattr(item, t) for t in fields]
+            for item in items]
+        colnames = ['%s.%s' % (tablename, t) for t in fields]
+        return self.parse(rows, colnames, False)
+
+
+    def count(self,query,distinct=None):
+        if distinct:
+            raise RuntimeError, "COUNT DISTINCT not supported"
+        (items, tablename, fields) = self.select_raw(query)
+        # self.db['_lastsql'] = self._count(query)
+        try:
+            return len(items)
+        except TypeError:
+            return items.count(limit=None)
+
+    def delete(self,tablename, query):
+        """
+        This function was changed on 2010-05-04 because according to
+        http://code.google.com/p/googleappengine/issues/detail?id=3119
+        GAE no longer support deleting more than 1000 records.
+        """
+        # self.db['_lastsql'] = self._delete(tablename,query)
+        (items, tablename, fields) = self.select_raw(query)
+        # items can be one item or a query
+        if not isinstance(items,list):
+            counter = items.count(limit=None)
+            leftitems = items.fetch(1000)
+            while len(leftitems):
+                gae.delete(leftitems)
+                leftitems = items.fetch(1000)
+        else:
+            counter = len(items)
+            gae.delete(items)
+        return counter
+
+    def update(self,tablename,query,update_fields):
+        # self.db['_lastsql'] = self._update(tablename,query,update_fields)
+        (items, tablename, fields) = self.select_raw(query)
+        counter = 0
+        for item in items:
+            for field, value in update_fields:
+                setattr(item, field.name, self.represent(value,field.type))
+            item.put()
+            counter += 1
+        logger.info(str(counter))
+        return counter
+
+    def insert(self,table,fields):
+        dfields=dict((f.name,self.represent(v,f.type)) for f,v in fields)
+        # table._db['_lastsql'] = self._insert(table,fields)
+        tmp = table._tableobj(**dfields)
+        tmp.put()
+        rid = Reference(tmp.key().id())
+        (rid._table, rid._record) = (table, None)
+        return rid
+
+    def bulk_insert(self,table,items):
+        parsed_items = []
+        for item in items:
+            dfields=dict((f.name,self.represent(v,f.type)) for f,v in item)
+            parsed_items.append(table._tableobj(**dfields))
+        gae.put(parsed_items)
+        return True
+
+def uuid2int(uuidv):
+    return uuid.UUID(uuidv).int
+
+def int2uuid(n):
+    return str(uuid.UUID(int=n))
+
+class CouchDBAdapter(NoSQLAdapter):
+    uploads_in_blob = True
+    types = {
+                'boolean': bool,
+                'string': str,
+                'text': str,
+                'password': str,
+                'blob': str,
+                'upload': str,
+                'integer': long,
+                'double': float,
+                'date': datetime.date,
+                'time': datetime.time,
+                'datetime': datetime.datetime,
+                'id': long,
+                'reference': long,
+                'list:string': list,
+                'list:integer': list,
+                'list:reference': list,
+        }
+
+    def file_exists(self, filename): pass
+    def file_open(self, filename, mode='rb', lock=True): pass
+    def file_close(self, fileobj, unlock=True): pass
+
+    def expand(self,expression,field_type=None):
+        if isinstance(expression,Field):
+            if expression.type=='id':
+                return "%s._id" % expression.tablename
+        return BaseAdapter.expand(self,expression,field_type)
+
+    def AND(self,first,second):
+        return '(%s && %s)' % (self.expand(first),self.expand(second))
+
+    def OR(self,first,second):
+        return '(%s || %s)' % (self.expand(first),self.expand(second))
+
+    def EQ(self,first,second):
+        if second is None:
+            return '(%s == null)' % self.expand(first)
+        return '(%s == %s)' % (self.expand(first),self.expand(second,first.type))
+
+    def NE(self,first,second):
+        if second is None:
+            return '(%s != null)' % self.expand(first)
+        return '(%s != %s)' % (self.expand(first),self.expand(second,first.type))
+
+    def COMMA(self,first,second):
+        return '%s + %s' % (self.expand(first),self.expand(second))
+
+    def represent(self, obj, fieldtype):
+        value = NoSQLAdapter.represent(self, obj, fieldtype)
+        if fieldtype=='id':
+            return repr(str(int(value)))
+        return repr(not isinstance(value,unicode) and value or value.encode('utf8'))
+
+    def __init__(self,db,uri='couchdb://127.0.0.1:5984',
+                 pool_size=0,folder=None,db_codec ='UTF-8',
+                 credential_decoder=lambda x:x, driver_args={},
+                    adapter_args={}):
+        self.db = db
+        self.uri = uri
+        self.dbengine = 'couchdb'
+        self.folder = folder
+        db['_lastsql'] = ''
+        self.db_codec = 'UTF-8'
+        self.pool_size = pool_size
+
+        url='http://'+uri[10:]
+        def connect(url=url,driver_args=driver_args):
+            return couchdb.Server(url,**driver_args)
+        self.pool_connection(connect)
+
+    def create_table(self, table, migrate=True, fake_migrate=False, polymodel=None):
+        if migrate:
+            try:
+                self.connection.create(table._tablename)
+            except:
+                pass
+
+    def insert(self,table,fields):
+        id = uuid2int(web2py_uuid())
+        ctable = self.connection[table._tablename]
+        values = dict((k.name,NoSQLAdapter.represent(self,v,k.type)) for k,v in fields)
+        values['_id'] = str(id)
+        ctable.save(values)
+        return id
+
+    def _select(self,query,fields,attributes):
+        if not isinstance(query,Query):
+            raise SyntaxError, "Not Supported"
+        for key in set(attributes.keys())-set(('orderby','groupby','limitby',
+                                               'required','cache','left',
+                                               'distinct','having')):
+            raise SyntaxError, 'invalid select attribute: %s' % key
+        new_fields=[]
+        for item in fields:
+            if isinstance(item,SQLALL):
+                new_fields += item.table
+            else:
+                new_fields.append(item)
+        def uid(fd):
+            return fd=='id' and '_id' or fd
+        def get(row,fd):
+            return fd=='id' and int(row['_id']) or row.get(fd,None)
+        fields = new_fields
+        tablename = self.get_table(query)
+        fieldnames = [f.name for f in (fields or self.db[tablename])]
+        colnames = ['%s.%s' % (tablename,k) for k in fieldnames]
+        fields = ','.join(['%s.%s' % (tablename,uid(f)) for f in fieldnames])
+        fn="function(%(t)s){if(%(query)s)emit(%(order)s,[%(fields)s]);}" %\
+            dict(t=tablename,
+                 query=self.expand(query),
+                 order='%s._id' % tablename,
+                 fields=fields)
+        return fn, colnames
+
+    def select(self,query,fields,attributes):
+        if not isinstance(query,Query):
+            raise SyntaxError, "Not Supported"
+        fn, colnames = self._select(query,fields,attributes)
+        tablename = colnames[0].split('.')[0]
+        ctable = self.connection[tablename]
+        rows = [cols['value'] for cols in ctable.query(fn)]
+        return self.parse(rows, colnames, False)
+
+    def delete(self,tablename,query):
+        if not isinstance(query,Query):
+            raise SyntaxError, "Not Supported"
+        if query.first.type=='id' and query.op==self.EQ:
+            id = query.second
+            tablename = query.first.tablename
+            assert(tablename == query.first.tablename)
+            ctable = self.connection[tablename]
+            try:
+                del ctable[str(id)]
+                return 1
+            except couchdb.http.ResourceNotFound:
+                return 0
+        else:
+            tablename = self.get_table(query)
+            rows = self.select(query,[self.db[tablename]._id],{})
+            ctable = self.connection[tablename]
+            for row in rows:
+                del ctable[str(row.id)]
+            return len(rows)
+
+    def update(self,tablename,query,fields):
+        if not isinstance(query,Query):
+            raise SyntaxError, "Not Supported"
+        if query.first.type=='id' and query.op==self.EQ:
+            id = query.second
+            tablename = query.first.tablename
+            ctable = self.connection[tablename]
+            try:
+                doc = ctable[str(id)]
+                for key,value in fields:
+                    doc[key.name] = NoSQLAdapter.represent(self,value,self.db[tablename][key.name].type)
+                ctable.save(doc)
+                return 1
+            except couchdb.http.ResourceNotFound:
+                return 0
+        else:
+            tablename = self.get_table(query)
+            rows = self.select(query,[self.db[tablename]._id],{})
+            ctable = self.connection[tablename]
+            table = self.db[tablename]
+            for row in rows:
+                doc = ctable[str(row.id)]
+                for key,value in fields:
+                    doc[key.name] = NoSQLAdapter.represent(self,value,table[key.name].type)
+                ctable.save(doc)
+            return len(rows)
+
+    def count(self,query,distinct=None):
+        if distinct:
+            raise RuntimeError, "COUNT DISTINCT not supported"
+        if not isinstance(query,Query):
+            raise SyntaxError, "Not Supported"
+        tablename = self.get_table(query)
+        rows = self.select(query,[self.db[tablename]._id],{})
+        return len(rows)
+
+def cleanup(text):
+    """
+    validates that the given text is clean: only contains [0-9a-zA-Z_]
+    """
+
+    if re.compile('[^0-9a-zA-Z_]').findall(text):
+        raise SyntaxError, \
+            'only [0-9a-zA-Z_] allowed in table and field names, received %s' \
+            % text
+    return text
+
+
+class MongoDBAdapter(NoSQLAdapter):
+    uploads_in_blob = True
+    types = {
+                'boolean': bool,
+                'string': str,
+                'text': str,
+                'password': str,
+                'blob': str,
+                'upload': str,
+                'integer': long,
+                'double': float,
+                'date': datetime.date,
+                'time': datetime.time,
+                'datetime': datetime.datetime,
+                'id': long,
+                'reference': long,
+                'list:string': list,
+                'list:integer': list,
+                'list:reference': list,
+        }
+
+    def __init__(self,db,uri='mongodb://127.0.0.1:5984/db',
+                 pool_size=0,folder=None,db_codec ='UTF-8',
+                 credential_decoder=lambda x:x, driver_args={},
+                    adapter_args={}):
+        self.db = db
+        self.uri = uri
+        self.dbengine = 'mongodb'
+        self.folder = folder
+        db['_lastsql'] = ''
+        self.db_codec = 'UTF-8'
+        self.pool_size = pool_size
+
+        m = re.compile('^(?P<host>[^\:/]+)(\:(?P<port>[0-9]+))?/(?P<db>.+)$').match(self._uri[10:])
+        if not m:
+            raise SyntaxError, "Invalid URI string in DAL: %s" % self._uri
+        host = m.group('host')
+        if not host:
+            raise SyntaxError, 'mongodb: host name required'
+        dbname = m.group('db')
+        if not dbname:
+            raise SyntaxError, 'mongodb: db name required'
+        port = m.group('port') or 27017
+        driver_args.update(dict(host=host,port=port))
+        def connect(dbname=dbname,driver_args=driver_args):
+            return pymongo.Connection(**driver_args)[dbname]
+        self.pool_connection(connect)
+
+    def insert(self,table,fields):
+        ctable = self.connection[table._tablename]
+        values = dict((k,self.represent(v,table[k].type)) for k,v in fields)
+        ctable.insert(values)
+        return uuid2int(id)
+
+
+    def count(self,query):
+        raise RuntimeError, "Not implemented"
+
+    def select(self,query,fields,attributes):
+        raise RuntimeError, "Not implemented"
+
+    def delete(self,tablename, query):
+        raise RuntimeError, "Not implemented"
+
+    def update(self,tablename,query,fields):
+        raise RuntimeError, "Not implemented"
+
+
+########################################################################
+# end of adapters
+########################################################################
+
+ADAPTERS = {
+    'sqlite': SQLiteAdapter,
+    'sqlite:memory': SQLiteAdapter,
+    'mysql': MySQLAdapter,
+    'postgres': PostgreSQLAdapter,
+    'oracle': OracleAdapter,
+    'mssql': MSSQLAdapter,
+    'mssql2': MSSQL2Adapter,
+    'db2': DB2Adapter,
+    'teradata': TeradataAdapter,
+    'informix': InformixAdapter,
+    'firebird': FireBirdAdapter,
+    'firebird_embedded': FireBirdAdapter,
+    'ingres': IngresAdapter,
+    'ingresu': IngresUnicodeAdapter,
+    'sapdb': SAPDBAdapter,
+    'cubrid': CubridAdapter,
+    'jdbc:sqlite': JDBCSQLiteAdapter,
+    'jdbc:sqlite:memory': JDBCSQLiteAdapter,
+    'jdbc:postgres': JDBCPostgreSQLAdapter,
+    'gae': GoogleDatastoreAdapter, # discouraged, for backward compatibility
+    'google:datastore': GoogleDatastoreAdapter,
+    'google:sql': GoogleSQLAdapter,
+    'couchdb': CouchDBAdapter,
+    'mongodb': MongoDBAdapter,
+}
+
+
+def sqlhtml_validators(field):
+    """
+    Field type validation, using web2py's validators mechanism.
+
+    makes sure the content of a field is in line with the declared
+    fieldtype
+    """
+    if not have_validators:
+        return []
+    field_type, field_length = field.type, field.length
+    if isinstance(field_type, SQLCustomType):
+        if hasattr(field_type, 'validator'):
+            return field_type.validator
+        else:
+            field_type = field_type.type
+    elif not isinstance(field_type,str):
+        return []
+    requires=[]
+    def ff(r,id):
+        row=r(id)
+        if not row:
+            return id
+        elif hasattr(r, '_format') and isinstance(r._format,str):
+            return r._format % row
+        elif hasattr(r, '_format') and callable(r._format):
+            return r._format(row)
+        else:
+            return id
+    if field_type == 'string':
+        requires.append(validators.IS_LENGTH(field_length))
+    elif field_type == 'text':
+        requires.append(validators.IS_LENGTH(field_length))
+    elif field_type == 'password':
+        requires.append(validators.IS_LENGTH(field_length))
+    elif field_type == 'double':
+        requires.append(validators.IS_FLOAT_IN_RANGE(-1e100, 1e100))
+    elif field_type == 'integer':
+        requires.append(validators.IS_INT_IN_RANGE(-1e100, 1e100))
+    elif field_type.startswith('decimal'):
+        requires.append(validators.IS_DECIMAL_IN_RANGE(-10**10, 10**10))
+    elif field_type == 'date':
+        requires.append(validators.IS_DATE())
+    elif field_type == 'time':
+        requires.append(validators.IS_TIME())
+    elif field_type == 'datetime':
+        requires.append(validators.IS_DATETIME())
+    elif field.db and field_type.startswith('reference') and \
+            field_type.find('.') < 0 and \
+            field_type[10:] in field.db.tables:
+        referenced = field.db[field_type[10:]]
+        def repr_ref(id, r=referenced, f=ff): return f(r, id)
+        field.represent = field.represent or repr_ref
+        if hasattr(referenced, '_format') and referenced._format:
+            requires = validators.IS_IN_DB(field.db,referenced._id,
+                                           referenced._format)
+            if field.unique:
+                requires._and = validators.IS_NOT_IN_DB(field.db,field)
+            if field.tablename == field_type[10:]:
+                return validators.IS_EMPTY_OR(requires)
+            return requires
+    elif field.db and field_type.startswith('list:reference') and \
+            field_type.find('.') < 0 and \
+            field_type[15:] in field.db.tables:
+        referenced = field.db[field_type[15:]]
+        def list_ref_repr(ids, r=referenced, f=ff):
+            if not ids:
+                return None
+            refs = r._db(r._id.belongs(ids)).select(r._id)
+            return (refs and ', '.join(str(f(r,ref.id)) for ref in refs) or '')
+        field.represent = field.represent or list_ref_repr
+        if hasattr(referenced, '_format') and referenced._format:
+            requires = validators.IS_IN_DB(field.db,referenced._id,
+                                           referenced._format,multiple=True)
+        else:
+            requires = validators.IS_IN_DB(field.db,referenced._id,
+                                           multiple=True)
+        if field.unique:
+            requires._and = validators.IS_NOT_IN_DB(field.db,field)
+        return requires
+    elif field_type.startswith('list:'):
+        def repr_list(values): return', '.join(str(v) for v in (values or []))
+        field.represent = field.represent or repr_list
+    if field.unique:
+        requires.insert(0,validators.IS_NOT_IN_DB(field.db,field))
+    sff = ['in', 'do', 'da', 'ti', 'de', 'bo']
+    if field.notnull and not field_type[:2] in sff:
+        requires.insert(0, validators.IS_NOT_EMPTY())
+    elif not field.notnull and field_type[:2] in sff and requires:
+        requires[-1] = validators.IS_EMPTY_OR(requires[-1])
+    return requires
+
+
+def bar_escape(item):
+    return str(item).replace('|', '||')
+
+def bar_encode(items):
+    return '|%s|' % '|'.join(bar_escape(item) for item in items if str(item).strip())
+
+def bar_decode_integer(value):
+    return [int(x) for x in value.split('|') if x.strip()]
+
+def bar_decode_string(value):
+    return [x.replace('||', '|') for x in string_unpack.split(value[1:-1]) if x.strip()]
+
+
+class Row(dict):
+
+    """
+    a dictionary that lets you do d['a'] as well as d.a
+    this is only used to store a Row
+    """
+
+    def __getitem__(self, key):
+        key=str(key)
+        if key in self.get('_extra',{}):
+            return self._extra[key]
+        return dict.__getitem__(self, key)
+
+    def __call__(self,key):
+        return self.__getitem__(key)
+
+    def __setitem__(self, key, value):
+        dict.__setitem__(self, str(key), value)
+
+    def __getattr__(self, key):
+        return self[key]
+
+    def __setattr__(self, key, value):
+        self[key] = value
+
+    def __repr__(self):
+        return '<Row ' + dict.__repr__(self) + '>'
+
+    def __int__(self):
+        return dict.__getitem__(self,'id')
+
+    def __eq__(self,other):
+        try:
+            return self.as_dict() == other.as_dict()
+        except AttributeError:
+            return False
+
+    def __ne__(self,other):
+        return not (self == other)
+
+    def __copy__(self):
+        return Row(dict(self))
+
+    def as_dict(self,datetime_to_str=False):
+        SERIALIZABLE_TYPES = (str,unicode,int,long,float,bool,list)
+        d = dict(self)
+        for k in copy.copy(d.keys()):
+            v=d[k]
+            if d[k] is None:
+                continue
+            elif isinstance(v,Row):
+                d[k]=v.as_dict()
+            elif isinstance(v,Reference):
+                d[k]=int(v)
+            elif isinstance(v,decimal.Decimal):
+                d[k]=float(v)
+            elif isinstance(v, (datetime.date, datetime.datetime, datetime.time)):
+                if datetime_to_str:
+                    d[k] = v.isoformat().replace('T',' ')[:19]
+            elif not isinstance(v,SERIALIZABLE_TYPES):
+                del d[k]
+        return d
+
+
+def Row_unpickler(data):
+    return Row(cPickle.loads(data))
+
+def Row_pickler(data):
+    return Row_unpickler, (cPickle.dumps(data.as_dict(datetime_to_str=False)),)
+
+copy_reg.pickle(Row, Row_pickler, Row_unpickler)
+
+
+################################################################################
+# Everything below should be independent on the specifics of the
+# database and should for RDBMs and some NoSQL databases
+################################################################################
+
+class SQLCallableList(list):
+    def __call__(self):
+        return copy.copy(self)
+
+
+class DAL(dict):
+
+    """
+    an instance of this class represents a database connection
+
+    Example::
+
+       db = DAL('sqlite://test.db')
+       db.define_table('tablename', Field('fieldname1'),
+                                    Field('fieldname2'))
+    """
+
+    @staticmethod
+    def set_folder(folder):
+        """
+        # ## this allows gluon to set a folder for this thread
+        # ## <<<<<<<<< Should go away as new DAL replaces old sql.py
+        """
+        BaseAdapter.set_folder(folder)
+
+    @staticmethod
+    def distributed_transaction_begin(*instances):
+        if not instances:
+            return
+        thread_key = '%s.%s' % (socket.gethostname(), threading.currentThread())
+        keys = ['%s.%i' % (thread_key, i) for (i,db) in instances]
+        instances = enumerate(instances)
+        for (i, db) in instances:
+            if not db._adapter.support_distributed_transaction():
+                raise SyntaxError, \
+                    'distributed transaction not suported by %s' % db._dbname
+        for (i, db) in instances:
+            db._adapter.distributed_transaction_begin(keys[i])
+
+    @staticmethod
+    def distributed_transaction_commit(*instances):
+        if not instances:
+            return
+        instances = enumerate(instances)
+        thread_key = '%s.%s' % (socket.gethostname(), threading.currentThread())
+        keys = ['%s.%i' % (thread_key, i) for (i,db) in instances]
+        for (i, db) in instances:
+            if not db._adapter.support_distributed_transaction():
+                raise SyntaxError, \
+                    'distributed transaction not suported by %s' % db._dbanme
+        try:
+            for (i, db) in instances:
+                db._adapter.prepare(keys[i])
+        except:
+            for (i, db) in instances:
+                db._adapter.rollback_prepared(keys[i])
+            raise RuntimeError, 'failure to commit distributed transaction'
+        else:
+            for (i, db) in instances:
+                db._adapter.commit_prepared(keys[i])
+        return
+
+
+    def __init__(self, uri='sqlite://dummy.db', pool_size=0, folder=None,
+                 db_codec='UTF-8', check_reserved=None,
+                 migrate=True, fake_migrate=False,
+                 migrate_enabled=True, fake_migrate_all=False,
+                 decode_credentials=False, driver_args=None,
+                 adapter_args={}, attempts=5, auto_import=False):
+        """
+        Creates a new Database Abstraction Layer instance.
+
+        Keyword arguments:
+
+        :uri: string that contains information for connecting to a database.
+               (default: 'sqlite://dummy.db')
+        :pool_size: How many open connections to make to the database object.
+        :folder: <please update me>
+        :db_codec: string encoding of the database (default: 'UTF-8')
+        :check_reserved: list of adapters to check tablenames and column names
+                         against sql reserved keywords. (Default None)
+
+        * 'common' List of sql keywords that are common to all database types
+                such as "SELECT, INSERT". (recommended)
+        * 'all' Checks against all known SQL keywords. (not recommended)
+                <adaptername> Checks against the specific adapters list of keywords
+                (recommended)
+        * '<adaptername>_nonreserved' Checks against the specific adapters
+                list of nonreserved keywords. (if available)
+        :migrate (defaults to True) sets default migrate behavior for all tables
+        :fake_migrate (defaults to False) sets default fake_migrate behavior for all tables
+        :migrate_enabled (defaults to True). If set to False disables ALL migrations
+        :fake_migrate_all (defaults to False). If sets to True fake migrates ALL tables
+        :attempts (defaults to 5). Number of times to attempt connecting
+        """
+        if not decode_credentials:
+            credential_decoder = lambda cred: cred
+        else:
+            credential_decoder = lambda cred: urllib.unquote(cred)
+        if folder:
+            self.set_folder(folder)
+        self._uri = uri
+        self._pool_size = pool_size
+        self._db_codec = db_codec
+        self._lastsql = ''
+        self._timings = []
+        self._pending_references = {}
+        self._request_tenant = 'request_tenant'
+        self._common_fields = []
+        if not str(attempts).isdigit() or attempts < 0:
+            attempts = 5
+        if uri:
+            uris = isinstance(uri,(list,tuple)) and uri or [uri]
+            error = ''
+            connected = False
+            for k in range(attempts):
+                for uri in uris:
+                    try:
+                        if is_jdbc and not uri.startswith('jdbc:'):
+                            uri = 'jdbc:'+uri
+                        self._dbname = regex_dbname.match(uri).group()
+                        if not self._dbname in ADAPTERS:
+                            raise SyntaxError, "Error in URI '%s' or database not supported" % self._dbname
+                        # notice that driver args or {} else driver_args defaults to {} global, not correct
+                        args = (self,uri,pool_size,folder,db_codec,credential_decoder,driver_args or {}, adapter_args)
+                        self._adapter = ADAPTERS[self._dbname](*args)
+                        connected = True
+                        break
+                    except SyntaxError:
+                        raise
+                    except Exception, error:
+                        sys.stderr.write('DEBUG_c: Exception %r' % ((Exception, error,),))
+                if connected:
+                    break
+                else:
+                    time.sleep(1)
+            if not connected:
+                raise RuntimeError, "Failure to connect, tried %d times:\n%s" % (attempts, error)
+        else:
+            args = (self,'None',0,folder,db_codec)
+            self._adapter = BaseAdapter(*args)
+            migrate = fake_migrate = False
+        adapter = self._adapter
+        self._uri_hash = hashlib.md5(adapter.uri).hexdigest()
+        self.tables = SQLCallableList()
+        self.check_reserved = check_reserved
+        if self.check_reserved:
+            from reserved_sql_keywords import ADAPTERS as RSK
+            self.RSK = RSK
+        self._migrate = migrate
+        self._fake_migrate = fake_migrate
+        self._migrate_enabled = migrate_enabled
+        self._fake_migrate_all = fake_migrate_all
+        if auto_import:
+            self.import_table_definitions(adapter.folder)
+
+    def import_table_definitions(self,path,migrate=False,fake_migrate=False):
+        pattern = os.path.join(path,self._uri_hash+'_*.table')
+        for filename in glob.glob(pattern):
+            tfile = self._adapter.file_open(filename, 'r')
+            try:
+                sql_fields = cPickle.load(tfile)
+                name = filename[len(pattern)-7:-6]
+                mf = [(value['sortable'],Field(key,type=value['type'])) \
+                          for key, value in sql_fields.items()]
+                mf.sort(lambda a,b: cmp(a[0],b[0]))
+                self.define_table(name,*[item[1] for item in mf],
+                                  **dict(migrate=migrate,fake_migrate=fake_migrate))
+            finally:
+                self._adapter.file_close(tfile)
+
+    def check_reserved_keyword(self, name):
+        """
+        Validates ``name`` against SQL keywords
+        Uses self.check_reserve which is a list of
+        operators to use.
+        self.check_reserved
+        ['common', 'postgres', 'mysql']
+        self.check_reserved
+        ['all']
+        """
+        for backend in self.check_reserved:
+            if name.upper() in self.RSK[backend]:
+                raise SyntaxError, 'invalid table/column name "%s" is a "%s" reserved SQL keyword' % (name, backend.upper())
+
+    def __contains__(self, tablename):
+        if self.has_key(tablename):
+            return True
+        else:
+            return False
+
+    def parse_as_rest(self,patterns,args,vars,query=None,nested_select=True):
+        """
+        EXAMPLE:
+
+db.define_table('person',Field('name'),Field('info'))
+db.define_table('pet',Field('person',db.person),Field('name'),Field('info'))
+
+@request.restful()
+def index():
+    def GET(*kargs,**kvars):
+        patterns = [
+            "/persons[person]",
+            "/{person.name.startswith}",
+            "/{person.name}/:field",
+            "/{person.name}/pets[pet.person]",
+            "/{person.name}/pet[pet.person]/{pet.name}",
+            "/{person.name}/pet[pet.person]/{pet.name}/:field"
+            ]
+        parser = db.parse_as_rest(patterns,kargs,kvars)
+        if parser.status == 200:
+            return dict(content=parser.response)
+        else:
+            raise HTTP(parser.status,parser.error)
+    def POST(table_name,**kvars):
+        if table_name == 'person':
+            return db.person.validate_and_insert(**kvars)
+        elif table_name == 'pet':
+            return db.pet.validate_and_insert(**kvars)
+        else:
+            raise HTTP(400)
+    return locals()
+        """
+
+        db = self
+        re1 = re.compile('^{[^\.]+\.[^\.]+(\.(lt|gt|le|ge|eq|ne|contains|startswith|year|month|day|hour|minute|second))?(\.not)?}$')
+        re2 = re.compile('^.+\[.+\]$')
+
+        def auto_table(table,base='',depth=0):
+            patterns = []
+            for field in db[table].fields:
+                if base:
+                    tag = '%s/%s' % (base,field.replace('_','-'))
+                else:
+                    tag = '/%s/%s' % (table.replace('_','-'),field.replace('_','-'))
+                f = db[table][field]
+                if not f.readable: continue
+                if f.type=='id' or 'slug' in field or f.type.startswith('reference'):
+                    tag += '/{%s.%s}' % (table,field)
+                    patterns.append(tag)
+                    patterns.append(tag+'/:field')
+                elif f.type.startswith('boolean'):
+                    tag += '/{%s.%s}' % (table,field)
+                    patterns.append(tag)
+                    patterns.append(tag+'/:field')
+                elif f.type.startswith('double') or f.type.startswith('integer'):
+                    tag += '/{%s.%s.ge}/{%s.%s.lt}' % (table,field,table,field)
+                    patterns.append(tag)
+                    patterns.append(tag+'/:field')
+                elif f.type.startswith('list:'):
+                    tag += '/{%s.%s.contains}' % (table,field)
+                    patterns.append(tag)
+                    patterns.append(tag+'/:field')
+                elif f.type in ('date','datetime'):
+                    tag+= '/{%s.%s.year}' % (table,field)
+                    patterns.append(tag)
+                    patterns.append(tag+'/:field')
+                    tag+='/{%s.%s.month}' % (table,field)
+                    patterns.append(tag)
+                    patterns.append(tag+'/:field')
+                    tag+='/{%s.%s.day}' % (table,field)
+                    patterns.append(tag)
+                    patterns.append(tag+'/:field')
+                if f.type in ('datetime','time'):
+                    tag+= '/{%s.%s.hour}' % (table,field)
+                    patterns.append(tag)
+                    patterns.append(tag+'/:field')
+                    tag+='/{%s.%s.minute}' % (table,field)
+                    patterns.append(tag)
+                    patterns.append(tag+'/:field')
+                    tag+='/{%s.%s.second}' % (table,field)
+                    patterns.append(tag)
+                    patterns.append(tag+'/:field')
+                if depth>0:
+                    for rtable,rfield in db[table]._referenced_by:
+                        tag+='/%s[%s.%s]' % (rtable,rtable,rfield)
+                        patterns.append(tag)
+                        patterns += auto_table(rtable,base=tag,depth=depth-1)
+            return patterns
+
+        if patterns=='auto':
+            patterns=[]
+            for table in db.tables:
+                if not table.startswith('auth_'):
+                    patterns += auto_table(table,base='',depth=1)
+        else:
+            i = 0
+            while i<len(patterns):
+                pattern = patterns[i]
+                tokens = pattern.split('/')
+                if tokens[-1].startswith(':auto') and re2.match(tokens[-1]):
+                    new_patterns = auto_table(tokens[-1][tokens[-1].find('[')+1:-1],'/'.join(tokens[:-1]))
+                    patterns = patterns[:i]+new_patterns+patterns[i+1:]
+                    i += len(new_patterns)
+                else:
+                    i += 1
+        if '/'.join(args) == 'patterns':
+            return Row({'status':200,'pattern':'list',
+                        'error':None,'response':patterns})
+        for pattern in patterns:
+            otable=table=None
+            dbset=db(query)
+            i=0
+            tags = pattern[1:].split('/')
+            # print pattern
+            if len(tags)!=len(args):
+                continue
+            for tag in tags:
+                # print i, tag, args[i]
+                if re1.match(tag):
+                    # print 're1:'+tag
+                    tokens = tag[1:-1].split('.')
+                    table, field = tokens[0], tokens[1]
+                    if not otable or table == otable:
+                        if len(tokens)==2 or tokens[2]=='eq':
+                            query = db[table][field]==args[i]
+                        elif tokens[2]=='ne':
+                            query = db[table][field]!=args[i]
+                        elif tokens[2]=='lt':
+                            query = db[table][field]<args[i]
+                        elif tokens[2]=='gt':
+                            query = db[table][field]>args[i]
+                        elif tokens[2]=='ge':
+                            query = db[table][field]>=args[i]
+                        elif tokens[2]=='le':
+                            query = db[table][field]<=args[i]
+                        elif tokens[2]=='year':
+                            query = db[table][field].year()==args[i]
+                        elif tokens[2]=='month':
+                            query = db[table][field].month()==args[i]
+                        elif tokens[2]=='day':
+                            query = db[table][field].day()==args[i]
+                        elif tokens[2]=='hour':
+                            query = db[table][field].hour()==args[i]
+                        elif tokens[2]=='minute':
+                            query = db[table][field].minutes()==args[i]
+                        elif tokens[2]=='second':
+                            query = db[table][field].seconds()==args[i]
+                        elif tokens[2]=='startswith':
+                            query = db[table][field].startswith(args[i])
+                        elif tokens[2]=='contains':
+                            query = db[table][field].contains(args[i])
+                        else:
+                            raise RuntimeError, "invalid pattern: %s" % pattern
+                        if len(tokens)==4 and tokens[3]=='not':
+                            query = ~query
+                        elif len(tokens)>=4:
+                            raise RuntimeError, "invalid pattern: %s" % pattern
+                        dbset=dbset(query)
+                    else:
+                        raise RuntimeError, "missing relation in pattern: %s" % pattern
+                elif otable and re2.match(tag) and args[i]==tag[:tag.find('[')]:
+                    # print 're2:'+tag
+                    ref = tag[tag.find('[')+1:-1]
+                    if '.' in ref:
+                        table,field = ref.split('.')
+                        # print table,field
+                        if nested_select:
+                            try:
+                                dbset=db(db[table][field].belongs(dbset._select(db[otable]._id)))
+                            except ValueError:
+                                return Row({'status':400,'pattern':pattern,
+                                            'error':'invalid path','response':None})
+                        else:
+                            items = [item.id for item in dbset.select(db[otable]._id)]
+                            dbset=db(db[table][field].belongs(items))
+                    else:
+                        dbset=dbset(db[ref])
+                elif tag==':field' and table:
+                    # # print 're3:'+tag
+                    field = args[i]
+                    if not field in db[table]: break
+                    try:
+                        item =  dbset.select(db[table][field],limitby=(0,1)).first()
+                    except ValueError:
+                        return Row({'status':400,'pattern':pattern,
+                                    'error':'invalid path','response':None})
+                    if not item:
+                        return Row({'status':404,'pattern':pattern,
+                                    'error':'record not found','response':None})
+                    else:
+                        return Row({'status':200,'response':item[field],
+                                    'pattern':pattern})
+                elif tag != args[i]:
+                    break
+                otable = table
+                i += 1
+                if i==len(tags) and table:
+                    otable,ofield = vars.get('order','%s.%s' % (table,field)).split('.',1)
+                    try:
+                        if otable[:1]=='~': orderby = ~db[otable[1:]][ofield]
+                        else: orderby = db[otable][ofield]
+                    except KeyError:
+                        return Row({'status':400,'error':'invalid orderby','response':None})
+                    fields = [field for field in db[table] if field.readable]
+                    count = dbset.count()
+                    try:
+                        limits = (int(vars.get('min',0)),int(vars.get('max',1000)))
+                        if limits[0]<0 or limits[1]<limits[0]: raise ValueError
+                    except ValueError:
+                        Row({'status':400,'error':'invalid limits','response':None})
+                    if count > limits[1]-limits[0]:
+                        Row({'status':400,'error':'too many records','response':None})
+                    try:
+                        response = dbset.select(limitby=limits,orderby=orderby,*fields)
+                    except ValueError:
+                        return Row({'status':400,'pattern':pattern,
+                                    'error':'invalid path','response':None})
+                    return Row({'status':200,'response':response,'pattern':pattern})
+        return Row({'status':400,'error':'no matching pattern','response':None})
+
+
+    def define_table(
+        self,
+        tablename,
+        *fields,
+        **args
+        ):
+
+        for key in args:
+            if key not in [
+                    'migrate',
+                    'primarykey',
+                    'fake_migrate',
+                    'format',
+                    'trigger_name',
+                    'sequence_name',
+                    'polymodel']:
+                raise SyntaxError, 'invalid table "%s" attribute: %s' % (tablename, key)
+        migrate = self._migrate_enabled and args.get('migrate',self._migrate)
+        fake_migrate = self._fake_migrate_all or args.get('fake_migrate',self._fake_migrate)
+        format = args.get('format',None)
+        trigger_name = args.get('trigger_name', None)
+        sequence_name = args.get('sequence_name', None)
+        primarykey=args.get('primarykey',None)
+        polymodel=args.get('polymodel',None)
+        if not isinstance(tablename,str):
+            raise SyntaxError, "missing table name"
+        tablename = cleanup(tablename)
+        lowertablename = tablename.lower()
+
+        if tablename.startswith('_') or hasattr(self,lowertablename) or \
+                regex_python_keywords.match(tablename):
+            raise SyntaxError, 'invalid table name: %s' % tablename
+        elif lowertablename in self.tables:
+            raise SyntaxError, 'table already defined: %s' % tablename
+        elif self.check_reserved:
+            self.check_reserved_keyword(tablename)
+
+        if self._common_fields:
+            fields = [f for f in fields] + [f for f in self._common_fields]
+
+        t = self[tablename] = Table(self, tablename, *fields,
+                                    **dict(primarykey=primarykey,
+                                    trigger_name=trigger_name,
+                                    sequence_name=sequence_name))
+        # db magic
+        if self._uri in (None,'None'):
+            return t
+
+        t._create_references()
+
+        if migrate or self._adapter.dbengine=='google:datastore':
+            try:
+                sql_locker.acquire()
+                self._adapter.create_table(t,migrate=migrate,
+                                           fake_migrate=fake_migrate,
+                                           polymodel=polymodel)
+            finally:
+                sql_locker.release()
+        else:
+            t._dbt = None
+        self.tables.append(tablename)
+        t._format = format
+        return t
+
+    def __iter__(self):
+        for tablename in self.tables:
+            yield self[tablename]
+
+    def __getitem__(self, key):
+        return dict.__getitem__(self, str(key))
+
+    def __setitem__(self, key, value):
+        dict.__setitem__(self, str(key), value)
+
+    def __getattr__(self, key):
+        return self[key]
+
+    def __setattr__(self, key, value):
+        if key[:1]!='_' and key in self:
+            raise SyntaxError, \
+                'Object %s exists and cannot be redefined' % key
+        self[key] = value
+
+    def __repr__(self):
+        return '<DAL ' + dict.__repr__(self) + '>'
+
+    def __call__(self, query=None):
+        if isinstance(query,Table):
+            query = query._id>0
+        elif isinstance(query,Field):
+            query = query!=None
+        return Set(self, query)
+
+    def commit(self):
+        self._adapter.commit()
+
+    def rollback(self):
+        self._adapter.rollback()
+
+    def executesql(self, query, placeholders=None, as_dict=False):
+        """
+        placeholders is optional and will always be None when using DAL
+        if using raw SQL with placeholders, placeholders may be
+        a sequence of values to be substituted in
+        or, *if supported by the DB driver*, a dictionary with keys
+        matching named placeholders in your SQL.
+
+        Added 2009-12-05 "as_dict" optional argument. Will always be
+        None when using DAL. If using raw SQL can be set to True
+        and the results cursor returned by the DB driver will be
+        converted to a sequence of dictionaries keyed with the db
+        field names. Tested with SQLite but should work with any database
+        since the cursor.description used to get field names is part of the
+        Python dbi 2.0 specs. Results returned with as_dict = True are
+        the same as those returned when applying .to_list() to a DAL query.
+
+        [{field1: value1, field2: value2}, {field1: value1b, field2: value2b}]
+
+        --bmeredyk
+        """
+        if placeholders:
+            self._adapter.execute(query, placeholders)
+        else:
+            self._adapter.execute(query)
+        if as_dict:
+            if not hasattr(self._adapter.cursor,'description'):
+                raise RuntimeError, "database does not support executesql(...,as_dict=True)"
+            # Non-DAL legacy db query, converts cursor results to dict.
+            # sequence of 7-item sequences. each sequence tells about a column.
+            # first item is always the field name according to Python Database API specs
+            columns = self._adapter.cursor.description
+            # reduce the column info down to just the field names
+            fields = [f[0] for f in columns]
+            # will hold our finished resultset in a list
+            data = self._adapter.cursor.fetchall()
+            # convert the list for each row into a dictionary so it's
+            # easier to work with. row['field_name'] rather than row[0]
+            return [dict(zip(fields,row)) for row in data]
+        # see if any results returned from database
+        try:
+            return self._adapter.cursor.fetchall()
+        except:
+            return None
+
+    def _update_referenced_by(self, other):
+        for tablename in self.tables:
+            by = self[tablename]._referenced_by
+            by[:] = [item for item in by if not item[0] == other]
+
+    def export_to_csv_file(self, ofile, *args, **kwargs):
+        for table in self.tables:
+            ofile.write('TABLE %s\r\n' % table)
+            self(self[table]._id > 0).select().export_to_csv_file(ofile, *args, **kwargs)
+            ofile.write('\r\n\r\n')
+        ofile.write('END')
+
+    def import_from_csv_file(self, ifile, id_map={}, null='<NULL>',
+                             unique='uuid', *args, **kwargs):
+        for line in ifile:
+            line = line.strip()
+            if not line:
+                continue
+            elif line == 'END':
+                return
+            elif not line.startswith('TABLE ') or not line[6:] in self.tables:
+                raise SyntaxError, 'invalid file format'
+            else:
+                tablename = line[6:]
+                self[tablename].import_from_csv_file(ifile, id_map, null,
+                                                     unique, *args, **kwargs)
+
+
+class SQLALL(object):
+    """
+    Helper class providing a comma-separated string having all the field names
+    (prefixed by table name and '.')
+
+    normally only called from within gluon.sql
+    """
+
+    def __init__(self, table):
+        self.table = table
+
+    def __str__(self):
+        return ', '.join([str(field) for field in self.table])
+
+
+class Reference(int):
+
+    def __allocate(self):
+        if not self._record:
+            self._record = self._table[int(self)]
+        if not self._record:
+            raise RuntimeError, "Using a recursive select but encountered a broken reference: %s %d"%(self._table, int(self))
+
+    def __getattr__(self, key):
+        if key == 'id':
+            return int(self)
+        self.__allocate()
+        return self._record.get(key, None)
+
+    def __setattr__(self, key, value):
+        if key.startswith('_'):
+            int.__setattr__(self, key, value)
+            return
+        self.__allocate()
+        self._record[key] =  value
+
+    def __getitem__(self, key):
+        if key == 'id':
+            return int(self)
+        self.__allocate()
+        return self._record.get(key, None)
+
+    def __setitem__(self,key,value):
+        self.__allocate()
+        self._record[key] = value
+
+
+def Reference_unpickler(data):
+    return marshal.loads(data)
+
+def Reference_pickler(data):
+    try:
+        marshal_dump = marshal.dumps(int(data))
+    except AttributeError:
+        marshal_dump = 'i%s' % struct.pack('<i', int(data))
+    return (Reference_unpickler, (marshal_dump,))
+
+copy_reg.pickle(Reference, Reference_pickler, Reference_unpickler)
+
+
+class Table(dict):
+
+    """
+    an instance of this class represents a database table
+
+    Example::
+
+        db = DAL(...)
+        db.define_table('users', Field('name'))
+        db.users.insert(name='me') # print db.users._insert(...) to see SQL
+        db.users.drop()
+    """
+
+    def __init__(
+        self,
+        db,
+        tablename,
+        *fields,
+        **args
+        ):
+        """
+        Initializes the table and performs checking on the provided fields.
+
+        Each table will have automatically an 'id'.
+
+        If a field is of type Table, the fields (excluding 'id') from that table
+        will be used instead.
+
+        :raises SyntaxError: when a supplied field is of incorrect type.
+        """
+        self._tablename = tablename
+        self._sequence_name = args.get('sequence_name',None) or \
+            db and db._adapter.sequence_name(tablename)
+        self._trigger_name = args.get('trigger_name',None) or \
+            db and db._adapter.trigger_name(tablename)
+
+        primarykey = args.get('primarykey', None)
+        fieldnames,newfields=set(),[]
+        if primarykey:
+            if not isinstance(primarykey,list):
+                raise SyntaxError, \
+                    "primarykey must be a list of fields from table '%s'" \
+                    % tablename
+            self._primarykey = primarykey            
+        elif not [f for f in fields if isinstance(f,Field) and f.type=='id']:
+            field = Field('id', 'id')
+            newfields.append(field)
+            fieldnames.add('id')
+            self._id = field
+        for field in fields:
+            if not isinstance(field, (Field, Table)):
+                raise SyntaxError, \
+                    'define_table argument is not a Field or Table: %s' % field
+            elif isinstance(field, Field) and not field.name in fieldnames:
+                if hasattr(field, '_db'):
+                    field = copy.copy(field)
+                newfields.append(field)
+                fieldnames.add(field.name)
+                if field.type=='id':
+                    self._id = field
+            elif isinstance(field, Table):
+                table = field
+                for field in table:
+                    if not field.name in fieldnames and not field.type=='id':
+                        newfields.append(copy.copy(field))
+                        fieldnames.add(field.name)
+            else:
+                # let's ignore new fields with duplicated names!!!
+                pass
+        fields = newfields
+        self._db = db
+        tablename = tablename
+        self.fields = SQLCallableList()
+        self.virtualfields = []
+        fields = list(fields)
+
+        if db and self._db._adapter.uploads_in_blob==True:
+            for field in fields:
+                if isinstance(field, Field) and field.type == 'upload'\
+                        and field.uploadfield is True:
+                    tmp = field.uploadfield = '%s_blob' % field.name
+                    fields.append(self._db.Field(tmp, 'blob', default=''))
+
+        lower_fieldnames = set()
+        reserved = dir(Table) + ['fields'] 
+        for field in fields:
+            if db and db.check_reserved:
+                db.check_reserved_keyword(field.name)
+            elif field.name in reserved:
+                raise SyntaxError, "field name %s not allowed" % field.name
+
+            if field.name.lower() in lower_fieldnames:
+                raise SyntaxError, "duplicate field %s in table %s" \
+                    % (field.name, tablename)
+            else:
+                lower_fieldnames.add(field.name.lower())
+
+            self.fields.append(field.name)
+            self[field.name] = field
+            if field.type == 'id':
+                self['id'] = field
+            field.tablename = field._tablename = tablename
+            field.table = field._table = self
+            field.db = field._db = self._db
+            if self._db and field.type!='text' and \
+                    self._db._adapter.maxcharlength < field.length:
+                field.length = self._db._adapter.maxcharlength
+            if field.requires == DEFAULT:
+                field.requires = sqlhtml_validators(field)
+        self.ALL = SQLALL(self)
+
+        if hasattr(self,'_primarykey'):
+            for k in self._primarykey:
+                if k not in self.fields:
+                    raise SyntaxError, \
+                        "primarykey must be a list of fields from table '%s " % tablename
+                else:
+                    self[k].notnull = True
+
+    def _validate(self,**vars):
+        errors = Row()
+        for key,value in vars.items():
+            value,error = self[key].validate(value)
+            if error:
+                errors[key] = error
+        return errors
+
+    def _create_references(self):
+        pr = self._db._pending_references
+        self._referenced_by = []
+        for fieldname in self.fields:
+            field=self[fieldname]
+            if isinstance(field.type,str) and field.type[:10] == 'reference ':
+                ref = field.type[10:].strip()
+                if not ref.split():
+                    raise SyntaxError, 'Table: reference to nothing: %s' %ref
+                refs = ref.split('.')
+                rtablename = refs[0]
+                if not rtablename in self._db:
+                    pr[rtablename] = pr.get(rtablename,[]) + [field]
+                    continue
+                rtable = self._db[rtablename]
+                if len(refs)==2:
+                    rfieldname = refs[1]
+                    if not hasattr(rtable,'_primarykey'):
+                        raise SyntaxError,\
+                            'keyed tables can only reference other keyed tables (for now)'
+                    if rfieldname not in rtable.fields:
+                        raise SyntaxError,\
+                            "invalid field '%s' for referenced table '%s' in table '%s'" \
+                            % (rfieldname, rtablename, self._tablename)
+                rtable._referenced_by.append((self._tablename, field.name))
+        for referee in pr.get(self._tablename,[]):
+            self._referenced_by.append((referee._tablename,referee.name))
+
+    def _filter_fields(self, record, id=False):
+        return dict([(k, v) for (k, v) in record.items() if k
+                     in self.fields and (self[k].type!='id' or id)])
+
+    def _build_query(self,key):
+        """ for keyed table only """
+        query = None
+        for k,v in key.iteritems():
+            if k in self._primarykey:
+                if query:
+                    query = query & (self[k] == v)
+                else:
+                    query = (self[k] == v)
+            else:
+                raise SyntaxError, \
+                'Field %s is not part of the primary key of %s' % \
+                (k,self._tablename)
+        return query
+
+    def __getitem__(self, key):
+        if not key:
+            return None
+        elif isinstance(key, dict):
+            """ for keyed table """
+            query = self._build_query(key)
+            rows = self._db(query).select()
+            if rows:
+                return rows[0]
+            return None
+        elif str(key).isdigit():
+            return self._db(self._id == key).select(limitby=(0,1)).first()
+        elif key:
+            return dict.__getitem__(self, str(key))
+
+    def __call__(self, key=DEFAULT, **kwargs):
+        if key!=DEFAULT:
+            if isinstance(key, Query):
+                record = self._db(key).select(limitby=(0,1)).first()
+            elif not str(key).isdigit():
+                record = None
+            else:
+                record = self._db(self._id == key).select(limitby=(0,1)).first()
+            if record:
+                for k,v in kwargs.items():
+                    if record[k]!=v: return None
+            return record
+        elif kwargs:
+            query = reduce(lambda a,b:a&b,[self[k]==v for k,v in kwargs.items()])
+            return self._db(query).select(limitby=(0,1)).first()
+        else:
+            return None
+
+    def __setitem__(self, key, value):
+        if isinstance(key, dict) and isinstance(value, dict):
+            """ option for keyed table """
+            if set(key.keys()) == set(self._primarykey):
+                value = self._filter_fields(value)
+                kv = {}
+                kv.update(value)
+                kv.update(key)
+                if not self.insert(**kv):
+                    query = self._build_query(key)
+                    self._db(query).update(**self._filter_fields(value))
+            else:
+                raise SyntaxError,\
+                    'key must have all fields from primary key: %s'%\
+                    (self._primarykey)
+        elif str(key).isdigit():
+            if key == 0:
+                self.insert(**self._filter_fields(value))
+            elif not self._db(self._id == key)\
+                    .update(**self._filter_fields(value)):
+                raise SyntaxError, 'No such record: %s' % key
+        else:
+            if isinstance(key, dict):
+                raise SyntaxError,\
+                    'value must be a dictionary: %s' % value
+            dict.__setitem__(self, str(key), value)
+
+    def __delitem__(self, key):
+        if isinstance(key, dict):
+            query = self._build_query(key)
+            if not self._db(query).delete():
+                raise SyntaxError, 'No such record: %s' % key
+        elif not str(key).isdigit() or not self._db(self._id == key).delete():
+            raise SyntaxError, 'No such record: %s' % key
+
+    def __getattr__(self, key):
+        return self[key]
+
+    def __setattr__(self, key, value):
+        if key in self:
+            raise SyntaxError, 'Object exists and cannot be redefined: %s' % key
+        self[key] = value
+
+    def __iter__(self):
+        for fieldname in self.fields:
+            yield self[fieldname]
+
+    def __repr__(self):
+        return '<Table ' + dict.__repr__(self) + '>'
+
+    def __str__(self):
+        if self.get('_ot', None):
+            return '%s AS %s' % (self._ot, self._tablename)
+        return self._tablename
+
+    def _drop(self, mode = ''):
+        return self._db._adapter._drop(self, mode)
+
+    def drop(self, mode = ''):
+        return self._db._adapter.drop(self,mode)
+
+    def _listify(self,fields,update=False):
+        new_fields = []
+        new_fields_names = []
+        for name in fields:
+            if not name in self.fields:
+                if name != 'id':
+                    raise SyntaxError, 'Field %s does not belong to the table' % name
+            else:
+                new_fields.append((self[name],fields[name]))
+                new_fields_names.append(name)
+        for ofield in self:
+            if not ofield.name in new_fields_names:
+                if not update and ofield.default!=None:
+                    new_fields.append((ofield,ofield.default))
+                elif update and ofield.update!=None:
+                    new_fields.append((ofield,ofield.update))
+        for ofield in self:
+            if not ofield.name in new_fields_names and ofield.compute:
+                try:
+                    new_fields.append((ofield,ofield.compute(Row(fields))))
+                except KeyError:
+                    pass
+            if not update and ofield.required and not ofield.name in new_fields_names:
+                raise SyntaxError,'Table: missing required field: %s' % ofield.name
+        return new_fields
+
+    def _insert(self, **fields):
+        return self._db._adapter._insert(self,self._listify(fields))
+
+    def insert(self, **fields):
+        return self._db._adapter.insert(self,self._listify(fields))
+
+    def validate_and_insert(self,**fields):
+        response = Row()
+        response.errors = self._validate(**fields)
+        if not response.errors:
+            response.id = self.insert(**fields)
+        else:
+            response.id = None
+        return response
+
+    def update_or_insert(self, key=DEFAULT, **values):
+        if key==DEFAULT:
+            record = self(**values)
+        else:
+            record = self(key)
+        if record:
+            record.update_record(**values)
+            newid = None
+        else:
+            newid = self.insert(**values)
+        return newid
+
+    def bulk_insert(self, items):
+        """
+        here items is a list of dictionaries
+        """
+        items = [self._listify(item) for item in items]
+        return self._db._adapter.bulk_insert(self,items)
+
+    def _truncate(self, mode = None):
+        return self._db._adapter._truncate(self, mode)
+
+    def truncate(self, mode = None):
+        return self._db._adapter.truncate(self, mode)
+
+    def import_from_csv_file(
+        self,
+        csvfile,
+        id_map=None,
+        null='<NULL>',
+        unique='uuid',
+        *args, **kwargs
+        ):
+        """
+        import records from csv file. Column headers must have same names as
+        table fields. field 'id' is ignored. If column names read 'table.file'
+        the 'table.' prefix is ignored.
+        'unique' argument is a field which must be unique
+        (typically a uuid field)
+        """
+
+        delimiter = kwargs.get('delimiter', ',')
+        quotechar = kwargs.get('quotechar', '"')
+        quoting = kwargs.get('quoting', csv.QUOTE_MINIMAL)
+
+        reader = csv.reader(csvfile, delimiter=delimiter, quotechar=quotechar, quoting=quoting)
+        colnames = None
+        if isinstance(id_map, dict):
+            if not self._tablename in id_map:
+                id_map[self._tablename] = {}
+            id_map_self = id_map[self._tablename]
+
+        def fix(field, value, id_map):
+            if value == null:
+                value = None
+            elif field.type=='blob':
+                value = base64.b64decode(value)
+            elif field.type=='double':
+                if not value.strip():
+                    value = None
+                else:
+                    value = float(value)
+            elif field.type=='integer':
+                if not value.strip():
+                    value = None
+                else:
+                    value = int(value)
+            elif field.type.startswith('list:string'):
+                value = bar_decode_string(value)
+            elif field.type.startswith('list:reference'):
+                ref_table = field.type[10:].strip()
+                value = [id_map[ref_table][int(v)] \
+                             for v in bar_decode_string(value)]
+            elif field.type.startswith('list:'):
+                value = bar_decode_integer(value)
+            elif id_map and field.type.startswith('reference'):
+                try:
+                    value = id_map[field.type[9:].strip()][value]
+                except KeyError:
+                    pass
+            return (field.name, value)
+
+        def is_id(colname):
+            if colname in self:
+                return self[colname].type == 'id'
+            else:
+                return False
+
+        for line in reader:
+            if not line:
+                break
+            if not colnames:
+                colnames = [x.split('.',1)[-1] for x in line][:len(line)]
+                cols, cid = [], []
+                for i,colname in enumerate(colnames):
+                    if is_id(colname):
+                        cid = i
+                    else:
+                        cols.append(i)
+                    if colname == unique:
+                        unique_idx = i
+            else:
+                items = [fix(self[colnames[i]], line[i], id_map) \
+                             for i in cols if colnames[i] in self.fields]
+                # Validation. Check for duplicate of 'unique' &,
+                # if present, update instead of insert.
+                if not unique or unique not in colnames:
+                    new_id = self.insert(**dict(items))
+                else:
+                    unique_value = line[unique_idx]
+                    query = self._db[self][unique] == unique_value
+                    record = self._db(query).select().first()
+                    if record:
+                        record.update_record(**dict(items))
+                        new_id = record[self._id.name]
+                    else:
+                        new_id = self.insert(**dict(items))
+                if id_map and cid != []:
+                    id_map_self[line[cid]] = new_id
+
+    def with_alias(self, alias):
+        return self._db._adapter.alias(self,alias)
+
+    def on(self, query):
+        return Expression(self._db,self._db._adapter.ON,self,query)
+
+
+
+class Expression(object):
+
+    def __init__(
+        self,
+        db,
+        op,
+        first=None,
+        second=None,
+        type=None,
+        ):
+
+        self.db = db
+        self.op = op
+        self.first = first
+        self.second = second
+        ### self._tablename =  first._tablename ## CHECK
+        if not type and first and hasattr(first,'type'):
+            self.type = first.type
+        else:
+            self.type = type
+
+    def sum(self):
+        return Expression(self.db, self.db._adapter.AGGREGATE, self, 'SUM', self.type)
+
+    def max(self):
+        return Expression(self.db, self.db._adapter.AGGREGATE, self, 'MAX', self.type)
+
+    def min(self):
+        return Expression(self.db, self.db._adapter.AGGREGATE, self, 'MIN', self.type)
+
+    def len(self):
+        return Expression(self.db, self.db._adapter.AGGREGATE, self, 'LENGTH', 'integer')
+
+    def lower(self):
+        return Expression(self.db, self.db._adapter.LOWER, self, None, self.type)
+
+    def upper(self):
+        return Expression(self.db, self.db._adapter.UPPER, self, None, self.type)
+
+    def year(self):
+        return Expression(self.db, self.db._adapter.EXTRACT, self, 'year', 'integer')
+
+    def month(self):
+        return Expression(self.db, self.db._adapter.EXTRACT, self, 'month', 'integer')
+
+    def day(self):
+        return Expression(self.db, self.db._adapter.EXTRACT, self, 'day', 'integer')
+
+    def hour(self):
+        return Expression(self.db, self.db._adapter.EXTRACT, self, 'hour', 'integer')
+
+    def minutes(self):
+        return Expression(self.db, self.db._adapter.EXTRACT, self, 'minute', 'integer')
+
+    def coalesce_zero(self):
+            return Expression(self.db, self.db._adapter.COALESCE_ZERO, self, None, self.type)
+
+    def seconds(self):
+        return Expression(self.db, self.db._adapter.EXTRACT, self, 'second', 'integer')
+
+    def __getslice__(self, start, stop):
+        if start < 0:
+            pos0 = '(%s - %d)' % (self.len(), abs(start) - 1)
+        else:
+            pos0 = start + 1
+
+        if stop < 0:
+            length = '(%s - %d - %s)' % (self.len(), abs(stop) - 1, pos0)
+        elif stop == sys.maxint:
+            length = self.len()
+        else:
+            length = '(%s - %s)' % (stop + 1, pos0)
+        return Expression(self.db,self.db._adapter.SUBSTRING,
+                          self, (pos0, length), self.type)
+
+    def __getitem__(self, i):
+        return self[i:i + 1]
+
+    def __str__(self):
+        return self.db._adapter.expand(self,self.type)
+
+    def __or__(self, other):  # for use in sortby
+        return Expression(self.db,self.db._adapter.COMMA,self,other,self.type)
+
+    def __invert__(self):
+        if hasattr(self,'_op') and self.op == self.db._adapter.INVERT:
+            return self.first
+        return Expression(self.db,self.db._adapter.INVERT,self,type=self.type)
+
+    def __add__(self, other):
+        return Expression(self.db,self.db._adapter.ADD,self,other,self.type)
+
+    def __sub__(self, other):
+        if self.type == 'integer':
+            result_type = 'integer'
+        elif self.type in ['date','time','datetime','double']:
+            result_type = 'double'
+        else:
+            raise SyntaxError, "subtraction operation not supported for type"
+        return Expression(self.db,self.db._adapter.SUB,self,other,
+                          result_type)
+    def __mul__(self, other):
+        return Expression(self.db,self.db._adapter.MUL,self,other,self.type)
+
+    def __div__(self, other):
+        return Expression(self.db,self.db._adapter.DIV,self,other,self.type)
+
+    def __mod__(self, other):
+        return Expression(self.db,self.db._adapter.MOD,self,other,self.type)
+
+    def __eq__(self, value):
+        return Query(self.db, self.db._adapter.EQ, self, value)
+
+    def __ne__(self, value):
+        return Query(self.db, self.db._adapter.NE, self, value)
+
+    def __lt__(self, value):
+        return Query(self.db, self.db._adapter.LT, self, value)
+
+    def __le__(self, value):
+        return Query(self.db, self.db._adapter.LE, self, value)
+
+    def __gt__(self, value):
+        return Query(self.db, self.db._adapter.GT, self, value)
+
+    def __ge__(self, value):
+        return Query(self.db, self.db._adapter.GE, self, value)
+
+    def like(self, value):
+        return Query(self.db, self.db._adapter.LIKE, self, value)
+
+    def belongs(self, value):
+        return Query(self.db, self.db._adapter.BELONGS, self, value)
+
+    def startswith(self, value):
+        if not self.type in ('string', 'text'):
+            raise SyntaxError, "startswith used with incompatible field type"
+        return Query(self.db, self.db._adapter.STARTSWITH, self, value)
+
+    def endswith(self, value):
+        if not self.type in ('string', 'text'):
+            raise SyntaxError, "endswith used with incompatible field type"
+        return Query(self.db, self.db._adapter.ENDSWITH, self, value)
+
+    def contains(self, value):
+        if not self.type in ('string', 'text') and not self.type.startswith('list:'):
+            raise SyntaxError, "contains used with incompatible field type"
+        return Query(self.db, self.db._adapter.CONTAINS, self, value)
+
+    def with_alias(self,alias):
+        return Expression(self.db,self.db._adapter.AS,self,alias,self.type)
+
+    # for use in both Query and sortby
+
+
+class SQLCustomType(object):
+    """
+    allows defining of custom SQL types
+
+    Example::
+
+        decimal = SQLCustomType(
+            type ='double',
+            native ='integer',
+            encoder =(lambda x: int(float(x) * 100)),
+            decoder = (lambda x: Decimal("0.00") + Decimal(str(float(x)/100)) )
+            )
+
+        db.define_table(
+            'example',
+            Field('value', type=decimal)
+            )
+
+    :param type: the web2py type (default = 'string')
+    :param native: the backend type
+    :param encoder: how to encode the value to store it in the backend
+    :param decoder: how to decode the value retrieved from the backend
+    :param validator: what validators to use ( default = None, will use the
+        default validator for type)
+    """
+
+    def __init__(
+        self,
+        type='string',
+        native=None,
+        encoder=None,
+        decoder=None,
+        validator=None,
+        _class=None,
+        ):
+
+        self.type = type
+        self.native = native
+        self.encoder = encoder or (lambda x: x)
+        self.decoder = decoder or (lambda x: x)
+        self.validator = validator
+        self._class = _class or type
+
+    def startswith(self, dummy=None):
+        return False
+
+    def __getslice__(self, a=0, b=100):
+        return None
+
+    def __getitem__(self, i):
+        return None
+
+    def __str__(self):
+        return self._class
+
+
+class Field(Expression):
+
+    """
+    an instance of this class represents a database field
+
+    example::
+
+        a = Field(name, 'string', length=32, default=None, required=False,
+            requires=IS_NOT_EMPTY(), ondelete='CASCADE',
+            notnull=False, unique=False,
+            uploadfield=True, widget=None, label=None, comment=None,
+            uploadfield=True, # True means store on disk,
+                              # 'a_field_name' means store in this field in db
+                              # False means file content will be discarded.
+            writable=True, readable=True, update=None, authorize=None,
+            autodelete=False, represent=None, uploadfolder=None,
+            uploadseparate=False # upload to separate directories by uuid_keys
+                                 # first 2 character and tablename.fieldname
+                                 # False - old behavior
+                                 # True - put uploaded file in
+                                 #   <uploaddir>/<tablename>.<fieldname>/uuid_key[:2]
+                                 #        directory)
+
+    to be used as argument of DAL.define_table
+
+    allowed field types:
+    string, boolean, integer, double, text, blob,
+    date, time, datetime, upload, password
+
+    strings must have a length of Adapter.maxcharlength by default (512 or 255 for mysql)
+    fields should have a default or they will be required in SQLFORMs
+    the requires argument is used to validate the field input in SQLFORMs
+
+    """
+
+    def __init__(
+        self,
+        fieldname,
+        type='string',
+        length=None,
+        default=DEFAULT,
+        required=False,
+        requires=DEFAULT,
+        ondelete='CASCADE',
+        notnull=False,
+        unique=False,
+        uploadfield=True,
+        widget=None,
+        label=None,
+        comment=None,
+        writable=True,
+        readable=True,
+        update=None,
+        authorize=None,
+        autodelete=False,
+        represent=None,
+        uploadfolder=None,
+        uploadseparate=False,
+        compute=None,
+        custom_store=None,
+        custom_retrieve=None,
+        custom_delete=None,
+        ):
+        self.db = None
+        self.op = None
+        self.first = None
+        self.second = None
+        if not isinstance(fieldname,str):
+            raise SyntaxError, "missing field name"
+        if fieldname.startswith(':'):
+            fieldname,readable,writable=fieldname[1:],False,False
+        elif fieldname.startswith('.'):
+            fieldname,readable,writable=fieldname[1:],False,False
+        if '=' in fieldname:
+            fieldname,default = fieldname.split('=',1)
+        self.name = fieldname = cleanup(fieldname)
+        if hasattr(Table,fieldname) or fieldname[0] == '_' or \
+                regex_python_keywords.match(fieldname):
+            raise SyntaxError, 'Field: invalid field name: %s' % fieldname
+        if isinstance(type, Table):
+            type = 'reference ' + type._tablename
+        self.type = type  # 'string', 'integer'
+        self.length = (length is None) and MAXCHARLENGTH or length
+        if default==DEFAULT:
+            self.default = update or None
+        else:
+            self.default = default
+        self.required = required  # is this field required
+        self.ondelete = ondelete.upper()  # this is for reference fields only
+        self.notnull = notnull
+        self.unique = unique
+        self.uploadfield = uploadfield
+        self.uploadfolder = uploadfolder
+        self.uploadseparate = uploadseparate
+        self.widget = widget
+        self.label = label or ' '.join(item.capitalize() for item in fieldname.split('_'))
+        self.comment = comment
+        self.writable = writable
+        self.readable = readable
+        self.update = update
+        self.authorize = authorize
+        self.autodelete = autodelete
+        if not represent and type in ('list:integer','list:string'):
+            represent=lambda x: ', '.join(str(y) for y in x or [])
+        self.represent = represent
+        self.compute = compute
+        self.isattachment = True
+        self.custom_store = custom_store
+        self.custom_retrieve = custom_retrieve
+        self.custom_delete = custom_delete
+        if self.label is None:
+            self.label = ' '.join([x.capitalize() for x in
+                                  fieldname.split('_')])
+        if requires is None:
+            self.requires = []
+        else:
+            self.requires = requires
+
+    def store(self, file, filename=None, path=None):
+        if self.custom_store:
+            return self.custom_store(file,filename,path)
+        if not filename:
+            filename = file.name
+        filename = os.path.basename(filename.replace('/', os.sep)\
+                                        .replace('\\', os.sep))
+        m = re.compile('\.(?P<e>\w{1,5})$').search(filename)
+        extension = m and m.group('e') or 'txt'
+        uuid_key = web2py_uuid().replace('-', '')[-16:]
+        encoded_filename = base64.b16encode(filename).lower()
+        newfilename = '%s.%s.%s.%s' % \
+            (self._tablename, self.name, uuid_key, encoded_filename)
+        newfilename = newfilename[:200] + '.' + extension
+        if isinstance(self.uploadfield,Field):
+            blob_uploadfield_name = self.uploadfield.uploadfield
+            keys={self.uploadfield.name: newfilename,
+                  blob_uploadfield_name: file.read()}
+            self.uploadfield.table.insert(**keys)
+        elif self.uploadfield == True:
+            if path:
+                pass
+            elif self.uploadfolder:
+                path = self.uploadfolder
+            elif self.db._adapter.folder:
+                path = os.path.join(self.db._adapter.folder, '..', 'uploads')
+            else:
+                raise RuntimeError, "you must specify a Field(...,uploadfolder=...)"
+            if self.uploadseparate:
+                path = os.path.join(path,"%s.%s" % (self._tablename, self.name),uuid_key[:2])
+            if not os.path.exists(path):
+                os.makedirs(path)
+            pathfilename = os.path.join(path, newfilename)
+            dest_file = open(pathfilename, 'wb')
+            try:
+                shutil.copyfileobj(file, dest_file)
+            finally:
+                dest_file.close()
+        return newfilename
+
+    def retrieve(self, name, path=None):
+        if self.custom_retrieve:
+            return self.custom_retrieve(name, path)
+        import http
+        if self.authorize or isinstance(self.uploadfield, str):
+            row = self.db(self == name).select().first()
+            if not row:
+                raise http.HTTP(404)
+        if self.authorize and not self.authorize(row):
+            raise http.HTTP(403)
+        try:
+            m = regex_content.match(name)
+            if not m or not self.isattachment:
+                raise TypeError, 'Can\'t retrieve %s' % name
+            filename = base64.b16decode(m.group('name'), True)
+            filename = regex_cleanup_fn.sub('_', filename)
+        except (TypeError, AttributeError):
+            filename = name
+        if isinstance(self.uploadfield, str):  # ## if file is in DB
+            return (filename, cStringIO.StringIO(row[self.uploadfield] or ''))
+        elif isinstance(self.uploadfield,Field):
+            blob_uploadfield_name = self.uploadfield.uploadfield
+            query = self.uploadfield == name
+            data = self.uploadfield.table(query)[blob_uploadfield_name]
+            return (filename, cStringIO.StringIO(data))
+        else:
+            # ## if file is on filesystem
+            if path:
+                pass
+            elif self.uploadfolder:
+                path = self.uploadfolder
+            else:
+                path = os.path.join(self.db._adapter.folder, '..', 'uploads')
+            if self.uploadseparate:
+                t = m.group('table')
+                f = m.group('field')
+                u = m.group('uuidkey')
+                path = os.path.join(path,"%s.%s" % (t,f),u[:2])
+            return (filename, open(os.path.join(path, name), 'rb'))
+
+    def formatter(self, value):
+        if value is None or not self.requires:
+            return value
+        if not isinstance(self.requires, (list, tuple)):
+            requires = [self.requires]
+        elif isinstance(self.requires, tuple):
+            requires = list(self.requires)
+        else:
+            requires = copy.copy(self.requires)
+        requires.reverse()
+        for item in requires:
+            if hasattr(item, 'formatter'):
+                value = item.formatter(value)
+        return value
+
+    def validate(self, value):
+        if not self.requires:
+            return (value, None)
+        requires = self.requires
+        if not isinstance(requires, (list, tuple)):
+            requires = [requires]
+        for validator in requires:
+            (value, error) = validator(value)
+            if error:
+                return (value, error)
+        return (value, None)
+
+    def count(self):
+        return Expression(self.db, self.db._adapter.AGGREGATE, self, 'COUNT', 'integer')
+
+    def __nonzero__(self):
+        return True
+
+    def __str__(self):
+        try:
+            return '%s.%s' % (self.tablename, self.name)
+        except:
+            return '<no table>.%s' % self.name
+
+
+class Query(object):
+
+    """
+    a query object necessary to define a set.
+    it can be stored or can be passed to DAL.__call__() to obtain a Set
+
+    Example::
+
+        query = db.users.name=='Max'
+        set = db(query)
+        records = set.select()
+
+    """
+
+    def __init__(
+        self,
+        db,
+        op,
+        first=None,
+        second=None,
+        ):
+        self.db = db
+        self.op = op
+        self.first = first
+        self.second = second
+
+    def __str__(self):
+        return self.db._adapter.expand(self)
+
+    def __and__(self, other):
+        return Query(self.db,self.db._adapter.AND,self,other)
+
+    def __or__(self, other):
+        return Query(self.db,self.db._adapter.OR,self,other)
+
+    def __invert__(self):
+        if self.op==self.db._adapter.NOT:
+            return self.first
+        return Query(self.db,self.db._adapter.NOT,self)
+
+
+regex_quotes = re.compile("'[^']*'")
+
+
+def xorify(orderby):
+    if not orderby:
+        return None
+    orderby2 = orderby[0]
+    for item in orderby[1:]:
+        orderby2 = orderby2 | item
+    return orderby2
+
+
+class Set(object):
+
+    """
+    a Set represents a set of records in the database,
+    the records are identified by the query=Query(...) object.
+    normally the Set is generated by DAL.__call__(Query(...))
+
+    given a set, for example
+       set = db(db.users.name=='Max')
+    you can:
+       set.update(db.users.name='Massimo')
+       set.delete() # all elements in the set
+       set.select(orderby=db.users.id, groupby=db.users.name, limitby=(0,10))
+    and take subsets:
+       subset = set(db.users.id<5)
+    """
+
+    def __init__(self, db, query):
+        self.db = db
+        self._db = db # for backward compatibility
+        self.query = query
+
+    def __call__(self, query):
+        if isinstance(query,Table):
+            query = query._id>0
+        elif isinstance(query,Field):
+            query = query!=None
+        if self.query:
+            return Set(self.db, self.query & query)
+        else:
+            return Set(self.db, query)
+
+    def _count(self,distinct=None):
+        return self.db._adapter._count(self.query,distinct)
+
+    def _select(self, *fields, **attributes):
+        return self.db._adapter._select(self.query,fields,attributes)
+
+    def _delete(self):
+        tablename=self.db._adapter.get_table(self.query)
+        return self.db._adapter._delete(tablename,self.query)
+
+    def _update(self, **update_fields):
+        tablename = self.db._adapter.get_table(self.query)
+        fields = self.db[tablename]._listify(update_fields,update=True)
+        return self.db._adapter._update(tablename,self.query,fields)
+
+    def isempty(self):
+        return not self.select(limitby=(0,1))
+
+    def count(self,distinct=None):
+        return self.db._adapter.count(self.query,distinct)
+
+    def select(self, *fields, **attributes):
+        return self.db._adapter.select(self.query,fields,attributes)
+
+    def delete(self):
+        tablename=self.db._adapter.get_table(self.query)
+        self.delete_uploaded_files()
+        return self.db._adapter.delete(tablename,self.query)
+
+    def update(self, **update_fields):
+        tablename = self.db._adapter.get_table(self.query)
+        fields = self.db[tablename]._listify(update_fields,update=True)
+        if not fields:
+            raise SyntaxError, "No fields to update"
+        self.delete_uploaded_files(update_fields)
+        return self.db._adapter.update(tablename,self.query,fields)
+    
+    def validate_and_update(self, **update_fields):
+        tablename = self.db._adapter.get_table(self.query)
+        response = Row()
+        response.errors = self.db[tablename]._validate(**update_fields) 
+        fields = self.db[tablename]._listify(update_fields,update=True)
+        if not fields:
+            raise SyntaxError, "No fields to update"
+        self.delete_uploaded_files(update_fields)
+        if not response.errors:
+            response.updated = self.db._adapter.update(tablename,self.query,fields)
+        else:
+            response.updated = None
+        return response
+
+    def delete_uploaded_files(self, upload_fields=None):
+        table = self.db[self.db._adapter.tables(self.query)[0]]
+        # ## mind uploadfield==True means file is not in DB
+        if upload_fields:
+            fields = upload_fields.keys()
+        else:
+            fields = table.fields
+        fields = [f for f in fields if table[f].type == 'upload'
+                   and table[f].uploadfield == True
+                   and table[f].autodelete]
+        if not fields:
+            return
+        for record in self.select(*[table[f] for f in fields]):
+            for fieldname in fields:
+                field = table[fieldname]
+                oldname = record.get(fieldname, None)
+                if not oldname:
+                    continue
+                if upload_fields and oldname == upload_fields[fieldname]:
+                    continue
+                if field.custom_delete:
+                    field.custom_delete(oldname)
+                else:
+                    uploadfolder = field.uploadfolder
+                    if not uploadfolder:
+                        uploadfolder = os.path.join(self.db._adapter.folder, '..', 'uploads')
+                    if field.uploadseparate:
+                        items = oldname.split('.')
+                        uploadfolder = os.path.join(uploadfolder,
+                                                    "%s.%s" % (items[0], items[1]),
+                                                    items[2][:2])                
+                    oldpath = os.path.join(uploadfolder, oldname)
+                    if os.path.exists(oldpath):
+                        os.unlink(oldpath)
+
+def update_record(pack, a={}):
+    (colset, table, id) = pack
+    b = a or dict(colset)
+    c = dict([(k,v) for (k,v) in b.items() if k in table.fields and table[k].type!='id'])
+    table._db(table._id==id).update(**c)
+    for (k, v) in c.items():
+        colset[k] = v
+
+
+class Rows(object):
+
+    """
+    A wrapper for the return value of a select. It basically represents a table.
+    It has an iterator and each row is represented as a dictionary.
+    """
+
+    # ## TODO: this class still needs some work to care for ID/OID
+
+    def __init__(
+        self,
+        db=None,
+        records=[],
+        colnames=[],
+        compact=True,
+        rawrows=None
+        ):
+        self.db = db
+        self.records = records
+        self.colnames = colnames
+        self.compact = compact
+        self.response = rawrows
+
+    def setvirtualfields(self,**keyed_virtualfields):
+        if not keyed_virtualfields:
+            return self
+        for row in self.records:
+            for (tablename,virtualfields) in keyed_virtualfields.items():
+                attributes = dir(virtualfields)
+                virtualfields.__dict__.update(row)
+                if not tablename in row:
+                    box = row[tablename] = Row()
+                else:
+                    box = row[tablename]
+                for attribute in attributes:
+                    if attribute[0] != '_':
+                        method = getattr(virtualfields,attribute)
+                        if hasattr(method,'im_func') and method.im_func.func_code.co_argcount:
+                            box[attribute]=method()
+        return self
+
+    def __and__(self,other):
+        if self.colnames!=other.colnames: raise Exception, 'Cannot & incompatible Rows objects'
+        records = self.records+other.records
+        return Rows(self.db,records,self.colnames)
+
+    def __or__(self,other):
+        if self.colnames!=other.colnames: raise Exception, 'Cannot | incompatible Rows objects'
+        records = self.records
+        records += [record for record in other.records \
+                        if not record in records]
+        return Rows(self.db,records,self.colnames)
+
+    def __nonzero__(self):
+        if len(self.records):
+            return 1
+        return 0
+
+    def __len__(self):
+        return len(self.records)
+
+    def __getslice__(self, a, b):
+        return Rows(self.db,self.records[a:b],self.colnames)
+
+    def __getitem__(self, i):
+        row = self.records[i]
+        keys = row.keys()
+        if self.compact and len(keys) == 1 and keys[0] != '_extra':
+            return row[row.keys()[0]]
+        return row
+
+    def __iter__(self):
+        """
+        iterator over records
+        """
+
+        for i in xrange(len(self)):
+            yield self[i]
+
+    def __str__(self):
+        """
+        serializes the table into a csv file
+        """
+
+        s = cStringIO.StringIO()
+        self.export_to_csv_file(s)
+        return s.getvalue()
+
+    def first(self):
+        if not self.records:
+            return None
+        return self[0]
+
+    def last(self):
+        if not self.records:
+            return None
+        return self[-1]
+
+    def find(self,f):
+        """
+        returns a new Rows object, a subset of the original object,
+        filtered by the function f
+        """
+        if not self.records:
+            return Rows(self.db, [], self.colnames)
+        records = []
+        for i in range(0,len(self)):
+            row = self[i]
+            if f(row):
+                records.append(self.records[i])
+        return Rows(self.db, records, self.colnames)
+
+    def exclude(self, f):
+        """
+        removes elements from the calling Rows object, filtered by the function f,
+        and returns a new Rows object containing the removed elements
+        """
+        if not self.records:
+            return Rows(self.db, [], self.colnames)
+        removed = []
+        i=0
+        while i<len(self):
+            row = self[i]
+            if f(row):
+                removed.append(self.records[i])
+                del self.records[i]
+            else:
+                i += 1
+        return Rows(self.db, removed, self.colnames)
+
+    def sort(self, f, reverse=False):
+        """
+        returns a list of sorted elements (not sorted in place)
+        """
+        return Rows(self.db,sorted(self,key=f,reverse=reverse),self.colnames)
+
+    def as_list(self,
+                compact=True,
+                storage_to_dict=True,
+                datetime_to_str=True):
+        """
+        returns the data as a list or dictionary.
+        :param storage_to_dict: when True returns a dict, otherwise a list(default True)
+        :param datetime_to_str: convert datetime fields as strings (default True)
+        """
+        (oc, self.compact) = (self.compact, compact)
+        if storage_to_dict:
+            items = [item.as_dict(datetime_to_str) for item in self]
+        else:
+            items = [item for item in self]
+        self.compact = compact
+        return items
+
+
+    def as_dict(self,
+                key='id',
+                compact=True,
+                storage_to_dict=True,
+                datetime_to_str=True):
+        """
+        returns the data as a dictionary of dictionaries (storage_to_dict=True) or records (False)
+
+        :param key: the name of the field to be used as dict key, normally the id
+        :param compact: ? (default True)
+        :param storage_to_dict: when True returns a dict, otherwise a list(default True)
+        :param datetime_to_str: convert datetime fields as strings (default True)
+        """
+        rows = self.as_list(compact, storage_to_dict, datetime_to_str)
+        if isinstance(key,str) and key.count('.')==1:
+            (table, field) = key.split('.')
+            return dict([(r[table][field],r) for r in rows])
+        elif isinstance(key,str):
+            return dict([(r[key],r) for r in rows])
+        else:
+            return dict([(key(r),r) for r in rows])
+
+    def export_to_csv_file(self, ofile, null='<NULL>', *args, **kwargs):
+        """
+        export data to csv, the first line contains the column names
+
+        :param ofile: where the csv must be exported to
+        :param null: how null values must be represented (default '<NULL>')
+        :param delimiter: delimiter to separate values (default ',')
+        :param quotechar: character to use to quote string values (default '"')
+        :param quoting: quote system, use csv.QUOTE_*** (default csv.QUOTE_MINIMAL)
+        :param represent: use the fields .represent value (default False)
+        :param colnames: list of column names to use (default self.colnames)
+                         This will only work when exporting rows objects!!!!
+                         DO NOT use this with db.export_to_csv()
+        """
+        delimiter = kwargs.get('delimiter', ',')
+        quotechar = kwargs.get('quotechar', '"')
+        quoting = kwargs.get('quoting', csv.QUOTE_MINIMAL)
+        represent = kwargs.get('represent', False)
+        writer = csv.writer(ofile, delimiter=delimiter,
+                            quotechar=quotechar, quoting=quoting)
+        colnames = kwargs.get('colnames', self.colnames)
+        # a proper csv starting with the column names
+        writer.writerow(colnames)
+
+        def none_exception(value):
+            """
+            returns a cleaned up value that can be used for csv export:
+            - unicode text is encoded as such
+            - None values are replaced with the given representation (default <NULL>)
+            """
+            if value is None:
+                return null
+            elif isinstance(value, unicode):
+                return value.encode('utf8')
+            elif isinstance(value,Reference):
+                return int(value)
+            elif hasattr(value, 'isoformat'):
+                return value.isoformat()[:19].replace('T', ' ')
+            elif isinstance(value, (list,tuple)): # for type='list:..'
+                return bar_encode(value)
+            return value
+
+        for record in self:
+            row = []
+            for col in colnames:
+                if not table_field.match(col):
+                    row.append(record._extra[col])
+                else:
+                    (t, f) = col.split('.')
+                    field = self.db[t][f]
+                    if isinstance(record.get(t, None), (Row,dict)):
+                        value = record[t][f]
+                    else:
+                        value = record[f]
+                    if field.type=='blob' and value!=None:
+                        value = base64.b64encode(value)
+                    elif represent and field.represent:
+                        value = field.represent(value)
+                    row.append(none_exception(value))
+            writer.writerow(row)
+
+    def xml(self):
+        """
+        serializes the table using sqlhtml.SQLTABLE (if present)
+        """
+
+        import sqlhtml
+        return sqlhtml.SQLTABLE(self).xml()
+
+    def json(self, mode='object', default=None):
+        """
+        serializes the table to a JSON list of objects
+        """
+        mode = mode.lower()
+        if not mode in ['object', 'array']:
+            raise SyntaxError, 'Invalid JSON serialization mode: %s' % mode
+
+        def inner_loop(record, col):
+            (t, f) = col.split('.')
+            res = None
+            if not table_field.match(col):
+                res = record._extra[col]
+            else:
+                if isinstance(record.get(t, None), Row):
+                    res = record[t][f]
+                else:
+                    res = record[f]
+            if mode == 'object':
+                return (f, res)
+            else:
+                return res
+
+        if mode == 'object':
+            items = [dict([inner_loop(record, col) for col in
+                     self.colnames]) for record in self]
+        else:
+            items = [[inner_loop(record, col) for col in self.colnames]
+                     for record in self]
+        if have_serializers:
+            return serializers.json(items,default=default or serializers.custom_json)
+        else:
+            import simplejson
+            return simplejson.dumps(items)
+
+def Rows_unpickler(data):
+    return cPickle.loads(data)
+
+def Rows_pickler(data):
+    return Rows_unpickler, \
+        (cPickle.dumps(data.as_list(storage_to_dict=True,
+                                    datetime_to_str=False)),)
+
+copy_reg.pickle(Rows, Rows_pickler, Rows_unpickler)
+
+
+################################################################################
+# dummy function used to define some doctests
+################################################################################
+
+def test_all():
+    """
+
+    >>> if len(sys.argv)<2: db = DAL(\"sqlite://test.db\")
+    >>> if len(sys.argv)>1: db = DAL(sys.argv[1])
+    >>> tmp = db.define_table('users',\
+              Field('stringf', 'string', length=32, required=True),\
+              Field('booleanf', 'boolean', default=False),\
+              Field('passwordf', 'password', notnull=True),\
+              Field('uploadf', 'upload'),\
+              Field('blobf', 'blob'),\
+              Field('integerf', 'integer', unique=True),\
+              Field('doublef', 'double', unique=True,notnull=True),\
+              Field('datef', 'date', default=datetime.date.today()),\
+              Field('timef', 'time'),\
+              Field('datetimef', 'datetime'),\
+              migrate='test_user.table')
+
+   Insert a field
+
+    >>> db.users.insert(stringf='a', booleanf=True, passwordf='p', blobf='0A',\
+                       uploadf=None, integerf=5, doublef=3.14,\
+                       datef=datetime.date(2001, 1, 1),\
+                       timef=datetime.time(12, 30, 15),\
+                       datetimef=datetime.datetime(2002, 2, 2, 12, 30, 15))
+    1
+
+    Drop the table
+
+    >>> db.users.drop()
+
+    Examples of insert, select, update, delete
+
+    >>> tmp = db.define_table('person',\
+              Field('name'),\
+              Field('birth','date'),\
+              migrate='test_person.table')
+    >>> person_id = db.person.insert(name=\"Marco\",birth='2005-06-22')
+    >>> person_id = db.person.insert(name=\"Massimo\",birth='1971-12-21')
+
+    commented len(db().select(db.person.ALL))
+    commented 2
+
+    >>> me = db(db.person.id==person_id).select()[0] # test select
+    >>> me.name
+    'Massimo'
+    >>> db(db.person.name=='Massimo').update(name='massimo') # test update
+    1
+    >>> db(db.person.name=='Marco').select().first().delete_record() # test delete
+    1
+
+    Update a single record
+
+    >>> me.update_record(name=\"Max\")
+    >>> me.name
+    'Max'
+
+    Examples of complex search conditions
+
+    >>> len(db((db.person.name=='Max')&(db.person.birth<'2003-01-01')).select())
+    1
+    >>> len(db((db.person.name=='Max')&(db.person.birth<datetime.date(2003,01,01))).select())
+    1
+    >>> len(db((db.person.name=='Max')|(db.person.birth<'2003-01-01')).select())
+    1
+    >>> me = db(db.person.id==person_id).select(db.person.name)[0]
+    >>> me.name
+    'Max'
+
+    Examples of search conditions using extract from date/datetime/time
+
+    >>> len(db(db.person.birth.month()==12).select())
+    1
+    >>> len(db(db.person.birth.year()>1900).select())
+    1
+
+    Example of usage of NULL
+
+    >>> len(db(db.person.birth==None).select()) ### test NULL
+    0
+    >>> len(db(db.person.birth!=None).select()) ### test NULL
+    1
+
+    Examples of search conditions using lower, upper, and like
+
+    >>> len(db(db.person.name.upper()=='MAX').select())
+    1
+    >>> len(db(db.person.name.like('%ax')).select())
+    1
+    >>> len(db(db.person.name.upper().like('%AX')).select())
+    1
+    >>> len(db(~db.person.name.upper().like('%AX')).select())
+    0
+
+    orderby, groupby and limitby
+
+    >>> people = db().select(db.person.name, orderby=db.person.name)
+    >>> order = db.person.name|~db.person.birth
+    >>> people = db().select(db.person.name, orderby=order)
+
+    >>> people = db().select(db.person.name, orderby=db.person.name, groupby=db.person.name)
+
+    >>> people = db().select(db.person.name, orderby=order, limitby=(0,100))
+
+    Example of one 2 many relation
+
+    >>> tmp = db.define_table('dog',\
+               Field('name'),\
+               Field('birth','date'),\
+               Field('owner',db.person),\
+               migrate='test_dog.table')
+    >>> db.dog.insert(name='Snoopy', birth=None, owner=person_id)
+    1
+
+    A simple JOIN
+
+    >>> len(db(db.dog.owner==db.person.id).select())
+    1
+
+    >>> len(db().select(db.person.ALL, db.dog.name,left=db.dog.on(db.dog.owner==db.person.id)))
+    1
+
+    Drop tables
+
+    >>> db.dog.drop()
+    >>> db.person.drop()
+
+    Example of many 2 many relation and Set
+
+    >>> tmp = db.define_table('author', Field('name'),\
+                            migrate='test_author.table')
+    >>> tmp = db.define_table('paper', Field('title'),\
+                            migrate='test_paper.table')
+    >>> tmp = db.define_table('authorship',\
+            Field('author_id', db.author),\
+            Field('paper_id', db.paper),\
+            migrate='test_authorship.table')
+    >>> aid = db.author.insert(name='Massimo')
+    >>> pid = db.paper.insert(title='QCD')
+    >>> tmp = db.authorship.insert(author_id=aid, paper_id=pid)
+
+    Define a Set
+
+    >>> authored_papers = db((db.author.id==db.authorship.author_id)&(db.paper.id==db.authorship.paper_id))
+    >>> rows = authored_papers.select(db.author.name, db.paper.title)
+    >>> for row in rows: print row.author.name, row.paper.title
+    Massimo QCD
+
+    Example of search condition using  belongs
+
+    >>> set = (1, 2, 3)
+    >>> rows = db(db.paper.id.belongs(set)).select(db.paper.ALL)
+    >>> print rows[0].title
+    QCD
+
+    Example of search condition using nested select
+
+    >>> nested_select = db()._select(db.authorship.paper_id)
+    >>> rows = db(db.paper.id.belongs(nested_select)).select(db.paper.ALL)
+    >>> print rows[0].title
+    QCD
+
+    Example of expressions
+
+    >>> mynumber = db.define_table('mynumber', Field('x', 'integer'))
+    >>> db(mynumber.id>0).delete()
+    0
+    >>> for i in range(10): tmp = mynumber.insert(x=i)
+    >>> db(mynumber.id>0).select(mynumber.x.sum())[0](mynumber.x.sum())
+    45
+
+    >>> db(mynumber.x+2==5).select(mynumber.x + 2)[0](mynumber.x + 2)
+    5
+
+    Output in csv
+
+    >>> print str(authored_papers.select(db.author.name, db.paper.title)).strip()
+    author.name,paper.title\r
+    Massimo,QCD
+
+    Delete all leftover tables
+
+    >>> DAL.distributed_transaction_commit(db)
+
+    >>> db.mynumber.drop()
+    >>> db.authorship.drop()
+    >>> db.author.drop()
+    >>> db.paper.drop()
+    """
+################################################################################
+# deprecated since the new DAL; here only for backward compatibility
+################################################################################
+
+SQLField = Field
+SQLTable = Table
+SQLXorable = Expression
+SQLQuery = Query
+SQLSet = Set
+SQLRows = Rows
+SQLStorage = Row
+SQLDB = DAL
+GQLDB = DAL
+DAL.Field = Field  # was necessary in gluon/globals.py session.connect
+DAL.Table = Table  # was necessary in gluon/globals.py session.connect
+
+################################################################################
+# run tests
+################################################################################
+
+if __name__ == '__main__':
+    import doctest
+    doctest.testmod()
+
+
+

ADDED   gluon/debug.py
Index: gluon/debug.py
==================================================================
--- /dev/null
+++ gluon/debug.py
@@ -0,0 +1,85 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Developed by Massimo Di Pierro <mdipierro@cs.depaul.edu>,
+limodou <limodou@gmail.com> and srackham <srackham@gmail.com>.
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+"""
+
+import logging
+import pdb
+import Queue
+import sys
+
+logger = logging.getLogger("web2py")
+
+class Pipe(Queue.Queue):
+    def __init__(self, name, mode='r', *args, **kwargs):
+        self.__name = name
+        Queue.Queue.__init__(self, *args, **kwargs)
+
+    def write(self, data):
+        logger.debug("debug %s writting %s" % (self.__name, data))
+        self.put(data)
+
+    def flush(self):
+        # mark checkpoint (complete message)
+        logger.debug("debug %s flushing..." % self.__name)
+        self.put(None)
+        # wait until it is processed
+        self.join()
+        logger.debug("debug %s flush done" % self.__name)
+
+    def read(self, count=None, timeout=None):
+        logger.debug("debug %s reading..." % (self.__name, ))
+        data = self.get(block=True, timeout=timeout)
+        # signal that we are ready
+        self.task_done()
+        logger.debug("debug %s read %s" % (self.__name, data))
+        return data
+
+    def readline(self):
+        logger.debug("debug %s readline..." % (self.__name, ))
+        return self.read()
+
+
+pipe_in = Pipe('in')
+pipe_out = Pipe('out')
+
+debugger = pdb.Pdb(completekey=None, stdin=pipe_in, stdout=pipe_out,)
+
+def set_trace():
+    "breakpoint shortcut (like pdb)"
+    logger.info("DEBUG: set_trace!")
+    debugger.set_trace(sys._getframe().f_back)
+
+
+def stop_trace():
+    "stop waiting for the debugger (called atexit)"
+    # this should prevent communicate is wait forever a command result
+    # and the main thread has finished
+    logger.info("DEBUG: stop_trace!")
+    pipe_out.write("debug finished!")
+    pipe_out.write(None)
+    #pipe_out.flush()
+
+def communicate(command=None):
+    "send command to debbuger, wait result"
+    if command is not None:
+        logger.info("DEBUG: sending command %s" % command)
+        pipe_in.write(command)
+        #pipe_in.flush()
+    result = []
+    while True:
+        data = pipe_out.read()
+        if data is None:
+            break
+        result.append(data)
+    logger.info("DEBUG: result %s" % repr(result))
+    return ''.join(result)
+
+
+

ADDED   gluon/decoder.py
Index: gluon/decoder.py
==================================================================
--- /dev/null
+++ gluon/decoder.py
@@ -0,0 +1,75 @@
+import codecs, encodings
+
+"""Caller will hand this library a buffer and ask it to either convert
+it or auto-detect the type.
+
+Based on http://code.activestate.com/recipes/52257/
+
+Licensed under the PSF License
+"""
+
+# None represents a potentially variable byte. "##" in the XML spec...
+autodetect_dict={ # bytepattern     : ("name",
+                (0x00, 0x00, 0xFE, 0xFF) : ("ucs4_be"),
+                (0xFF, 0xFE, 0x00, 0x00) : ("ucs4_le"),
+                (0xFE, 0xFF, None, None) : ("utf_16_be"),
+                (0xFF, 0xFE, None, None) : ("utf_16_le"),
+                (0x00, 0x3C, 0x00, 0x3F) : ("utf_16_be"),
+                (0x3C, 0x00, 0x3F, 0x00) : ("utf_16_le"),
+                (0x3C, 0x3F, 0x78, 0x6D): ("utf_8"),
+                (0x4C, 0x6F, 0xA7, 0x94): ("EBCDIC")
+                 }
+
+def autoDetectXMLEncoding(buffer):
+    """ buffer -> encoding_name
+    The buffer should be at least 4 bytes long.
+        Returns None if encoding cannot be detected.
+        Note that encoding_name might not have an installed
+        decoder (e.g. EBCDIC)
+    """
+    # a more efficient implementation would not decode the whole
+    # buffer at once but otherwise we'd have to decode a character at
+    # a time looking for the quote character...that's a pain
+
+    encoding = "utf_8" # according to the XML spec, this is the default
+                          # this code successively tries to refine the default
+                          # whenever it fails to refine, it falls back to
+                          # the last place encoding was set.
+    if len(buffer)>=4:
+        bytes = (byte1, byte2, byte3, byte4) = tuple(map(ord, buffer[0:4]))
+        enc_info = autodetect_dict.get(bytes, None)
+        if not enc_info: # try autodetection again removing potentially
+            # variable bytes
+            bytes = (byte1, byte2, None, None)
+            enc_info = autodetect_dict.get(bytes)
+    else:
+        enc_info = None
+
+    if enc_info:
+        encoding = enc_info # we've got a guess... these are
+                            #the new defaults
+
+        # try to find a more precise encoding using xml declaration
+        secret_decoder_ring = codecs.lookup(encoding)[1]
+        (decoded,length) = secret_decoder_ring(buffer)
+        first_line = decoded.split("\n")[0]
+        if first_line and first_line.startswith(u"<?xml"):
+            encoding_pos = first_line.find(u"encoding")
+            if encoding_pos!=-1:
+                # look for double quote
+                quote_pos=first_line.find('"', encoding_pos)
+
+                if quote_pos==-1:                 # look for single quote
+                    quote_pos=first_line.find("'", encoding_pos)
+
+                if quote_pos>-1:
+                    quote_char,rest=(first_line[quote_pos],
+                                                first_line[quote_pos+1:])
+                    encoding=rest[:rest.find(quote_char)]
+
+    return encoding
+
+def decoder(buffer):
+    encoding = autoDetectXMLEncoding(buffer)
+    return buffer.decode(encoding).encode('utf8')
+

ADDED   gluon/fileutils.py
Index: gluon/fileutils.py
==================================================================
--- /dev/null
+++ gluon/fileutils.py
@@ -0,0 +1,387 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+"""
+
+import storage
+import os
+import re
+import tarfile
+import glob
+import time
+from http import HTTP
+from gzip import open as gzopen
+from settings import global_settings
+
+
+__all__ = [
+    'read_file',
+    'write_file',
+    'readlines_file',
+    'up',
+    'abspath',
+    'mktree',
+    'listdir',
+    'recursive_unlink',
+    'cleanpath',
+    'tar',
+    'untar',
+    'tar_compiled',
+    'get_session',
+    'check_credentials',
+    'w2p_pack',
+    'w2p_unpack',
+    'w2p_pack_plugin',
+    'w2p_unpack_plugin',
+    'fix_newlines',
+    'make_fake_file_like_object',
+    ]
+
+def read_file(filename, mode='r'):
+    "returns content from filename, making sure to close the file explicitly on exit."
+    f = open(filename, mode)
+    try:
+        return f.read()
+    finally:
+        f.close()
+
+def write_file(filename, value, mode='w'):
+    "writes <value> to filename, making sure to close the file explicitly on exit."
+    f = open(filename, mode)
+    try:
+        return f.write(value)
+    finally:
+        f.close()
+
+def readlines_file(filename, mode='r'):
+    "applies .split('\n') to the output of read_file()"
+    return read_file(filename, mode).split('\n')
+
+def abspath(*relpath, **base):
+    "convert relative path to absolute path based (by default) on applications_parent"
+    path = os.path.join(*relpath)
+    gluon = base.get('gluon', False)
+    if os.path.isabs(path):
+        return path
+    if gluon:
+        return os.path.join(global_settings.gluon_parent, path)
+    return os.path.join(global_settings.applications_parent, path)
+
+
+def mktree(path):
+    head,tail =os.path.split(path)
+    if head:
+        if tail: mktree(head)
+        if not os.path.exists(head):
+            os.mkdir(head)
+
+def listdir(
+    path,
+    expression='^.+$',
+    drop=True,
+    add_dirs=False,
+    sort=True,
+    ):
+    """
+    like os.listdir() but you can specify a regex pattern to filter files.
+    if add_dirs is True, the returned items will have the full path.
+    """
+    if path[-1:] != os.path.sep:
+        path = path + os.path.sep
+    if drop:
+        n = len(path)
+    else:
+        n = 0
+    regex = re.compile(expression)
+    items = []
+    for (root, dirs, files) in os.walk(path, topdown=True):
+        for dir in dirs[:]:
+            if dir.startswith('.'):
+                dirs.remove(dir)
+        if add_dirs:
+            items.append(root[n:])
+        for file in sorted(files):
+            if regex.match(file) and not file.startswith('.'):
+                items.append(os.path.join(root, file)[n:])
+    if sort:
+        return sorted(items)
+    else:
+        return items
+
+
+def recursive_unlink(f):
+    if os.path.isdir(f):
+        for s in os.listdir(f):
+            recursive_unlink(os.path.join(f,s))
+        os.rmdir(f)
+    elif os.path.isfile(f):
+        os.unlink(f)
+
+
+def cleanpath(path):
+    """
+    turns any expression/path into a valid filename. replaces / with _ and
+    removes special characters.
+    """
+
+    items = path.split('.')
+    if len(items) > 1:
+        path = re.sub('[^\w\.]+', '_', '_'.join(items[:-1]) + '.'
+                       + ''.join(items[-1:]))
+    else:
+        path = re.sub('[^\w\.]+', '_', ''.join(items[-1:]))
+    return path
+
+
+def _extractall(filename, path='.', members=None):
+    if not hasattr(tarfile.TarFile, 'extractall'):
+        from tarfile import ExtractError
+
+        class TarFile(tarfile.TarFile):
+
+            def extractall(self, path='.', members=None):
+                """Extract all members from the archive to the current working
+             directory and set owner, modification time and permissions on
+             directories afterwards. `path' specifies a different directory
+             to extract to. `members' is optional and must be a subset of the
+             list returned by getmembers().
+                """
+
+                directories = []
+                if members is None:
+                    members = self
+                for tarinfo in members:
+                    if tarinfo.isdir():
+
+                        # Extract directory with a safe mode, so that
+                        # all files below can be extracted as well.
+
+                        try:
+                            os.makedirs(os.path.join(path,
+                                    tarinfo.name), 0777)
+                        except EnvironmentError:
+                            pass
+                        directories.append(tarinfo)
+                    else:
+                        self.extract(tarinfo, path)
+
+                # Reverse sort directories.
+
+                directories.sort(lambda a, b: cmp(a.name, b.name))
+                directories.reverse()
+
+                # Set correct owner, mtime and filemode on directories.
+
+                for tarinfo in directories:
+                    path = os.path.join(path, tarinfo.name)
+                    try:
+                        self.chown(tarinfo, path)
+                        self.utime(tarinfo, path)
+                        self.chmod(tarinfo, path)
+                    except ExtractError, e:
+                        if self.errorlevel > 1:
+                            raise
+                        else:
+                            self._dbg(1, 'tarfile: %s' % e)
+
+
+        _cls = TarFile
+    else:
+        _cls = tarfile.TarFile
+
+    tar = _cls(filename, 'r')
+    ret = tar.extractall(path, members)
+    tar.close()
+    return ret
+
+def tar(file, dir, expression='^.+$'):
+    """
+    tars dir into file, only tars file that match expression
+    """
+
+    tar = tarfile.TarFile(file, 'w')
+    try:
+        for file in listdir(dir, expression, add_dirs=True):
+            tar.add(os.path.join(dir, file), file, False)
+    finally:
+        tar.close()
+
+def untar(file, dir):
+    """
+    untar file into dir
+    """
+
+    _extractall(file, dir)
+
+
+def w2p_pack(filename, path, compiled=False):
+    filename = abspath(filename)
+    path = abspath(path)
+    tarname = filename + '.tar'
+    if compiled:
+        tar_compiled(tarname, path, '^[\w\.\-]+$')
+    else:
+        tar(tarname, path, '^[\w\.\-]+$')
+    w2pfp = gzopen(filename, 'wb')
+    tarfp = open(tarname, 'rb')
+    w2pfp.write(tarfp.read())
+    w2pfp.close()
+    tarfp.close()
+    os.unlink(tarname)
+
+def w2p_unpack(filename, path, delete_tar=True):
+    filename = abspath(filename)
+    path = abspath(path)
+    if filename[-4:] == '.w2p' or filename[-3:] == '.gz':
+        if filename[-4:] == '.w2p':
+            tarname = filename[:-4] + '.tar'
+        else:
+            tarname = filename[:-3] + '.tar'
+        fgzipped = gzopen(filename, 'rb')
+        tarfile = open(tarname, 'wb')
+        tarfile.write(fgzipped.read())
+        tarfile.close()
+        fgzipped.close()
+    else:
+        tarname = filename
+    untar(tarname, path)
+    if delete_tar:
+        os.unlink(tarname)
+
+
+def w2p_pack_plugin(filename, path, plugin_name):
+    """Pack the given plugin into a w2p file.
+    Will match files at:
+        <path>/*/plugin_[name].*
+        <path>/*/plugin_[name]/*
+    """
+    filename = abspath(filename)
+    path = abspath(path)
+    if not filename.endswith('web2py.plugin.%s.w2p' % plugin_name):
+        raise Exception, "Not a web2py plugin name"
+    plugin_tarball = tarfile.open(filename, 'w:gz')
+    try:
+        app_dir = path
+        while app_dir[-1]=='/':
+            app_dir = app_dir[:-1]
+        files1=glob.glob(os.path.join(app_dir,'*/plugin_%s.*' % plugin_name))
+        files2=glob.glob(os.path.join(app_dir,'*/plugin_%s/*' % plugin_name))
+        for file in files1+files2:
+            plugin_tarball.add(file, arcname=file[len(app_dir)+1:])
+    finally:
+        plugin_tarball.close()
+
+
+def w2p_unpack_plugin(filename, path, delete_tar=True):
+    filename = abspath(filename)
+    path = abspath(path)
+    if not os.path.basename(filename).startswith('web2py.plugin.'):
+        raise Exception, "Not a web2py plugin"
+    w2p_unpack(filename,path,delete_tar)
+
+
+def tar_compiled(file, dir, expression='^.+$'):
+    """
+    used to tar a compiled application.
+    the content of models, views, controllers is not stored in the tar file.
+    """
+
+    tar = tarfile.TarFile(file, 'w')
+    for file in listdir(dir, expression, add_dirs=True):
+        filename = os.path.join(dir, file)
+        if os.path.islink(filename):
+            continue
+        if os.path.isfile(filename) and file[-4:] != '.pyc':
+            if file[:6] == 'models':
+                continue
+            if file[:5] == 'views':
+                continue
+            if file[:11] == 'controllers':
+                continue
+            if file[:7] == 'modules':
+                continue
+        tar.add(filename, file, False)
+    tar.close()
+
+def up(path):
+    return os.path.dirname(os.path.normpath(path))
+
+
+def get_session(request, other_application='admin'):
+    """ checks that user is authorized to access other_application"""
+    if request.application == other_application:
+        raise KeyError
+    try:
+        session_id = request.cookies['session_id_' + other_application].value
+        osession = storage.load_storage(os.path.join(
+                up(request.folder), other_application, 'sessions', session_id))
+    except:
+        osession = storage.Storage()
+    return osession
+
+
+def check_credentials(request, other_application='admin', expiration = 60*60):
+    """ checks that user is authorized to access other_application"""
+    if request.env.web2py_runtime_gae:
+        from google.appengine.api import users
+        if users.is_current_user_admin():
+            return True
+        else:
+            login_html = '<a href="%s">Sign in with your google account</a>.' \
+                % users.create_login_url(request.env.path_info)
+            raise HTTP(200, '<html><body>%s</body></html>' % login_html)
+    else:
+        dt = time.time() - expiration
+        s = get_session(request, other_application)
+        return (s.authorized and s.last_time and s.last_time > dt)
+
+
+def fix_newlines(path):
+    regex = re.compile(r'''(\r
+|\r|
+)''')
+    for filename in listdir(path, '.*\.(py|html)$', drop=False):
+        rdata = read_file(filename, 'rb')
+        wdata = regex.sub('\n', rdata)
+        if wdata != rdata:
+            write_file(filename, wdata, 'wb')
+
+def copystream(
+    src,
+    dest,
+    size,
+    chunk_size=10 ** 5,
+    ):
+    """
+    this is here because I think there is a bug in shutil.copyfileobj
+    """
+    while size > 0:
+        if size < chunk_size:
+            data = src.read(size)
+        else:
+            data = src.read(chunk_size)
+        length = len(data)
+        if length > size:
+            (data, length) = (data[:size], size)
+        size -= length
+        if length == 0:
+            break
+        dest.write(data)
+        if length < chunk_size:
+            break
+    dest.seek(0)
+    return
+
+
+def make_fake_file_like_object():
+    class LogFile(object):
+        def write(self, value):
+            pass
+        def close(self):
+            pass
+    return LogFile()
+

ADDED   gluon/globals.py
Index: gluon/globals.py
==================================================================
--- /dev/null
+++ gluon/globals.py
@@ -0,0 +1,528 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+Contains the classes for the global used variables:
+
+- Request
+- Response
+- Session
+
+"""
+
+from storage import Storage, List
+from streamer import streamer, stream_file_or_304_or_206, DEFAULT_CHUNK_SIZE
+from xmlrpc import handler
+from contenttype import contenttype
+from html import xmlescape, TABLE, TR, PRE
+from http import HTTP
+from fileutils import up
+from serializers import json, custom_json
+import settings
+from utils import web2py_uuid
+from settings import global_settings
+
+import hashlib
+import portalocker
+import cPickle
+import cStringIO
+import datetime
+import re
+import Cookie
+import os
+import sys
+import traceback
+import threading
+
+regex_session_id = re.compile('^([\w\-]+/)?[\w\-\.]+$')
+
+__all__ = ['Request', 'Response', 'Session']
+
+current = threading.local()  # thread-local storage for request-scope globals
+
+class Request(Storage):
+
+    """
+    defines the request object and the default values of its members
+
+    - env: environment variables, by gluon.main.wsgibase()
+    - cookies
+    - get_vars
+    - post_vars
+    - vars
+    - folder
+    - application
+    - function
+    - args
+    - extension
+    - now: datetime.datetime.today()
+    - restful()
+    """
+
+    def __init__(self):
+        self.wsgi = Storage() # hooks to environ and start_response
+        self.env = Storage()
+        self.cookies = Cookie.SimpleCookie()
+        self.get_vars = Storage()
+        self.post_vars = Storage()
+        self.vars = Storage()
+        self.folder = None
+        self.application = None
+        self.function = None
+        self.args = List()
+        self.extension = None
+        self.now = datetime.datetime.now()
+        self.is_restful = False
+        self.is_https = False
+        self.is_local = False
+
+    def compute_uuid(self):
+        self.uuid = '%s/%s.%s.%s' % (
+            self.application,
+            self.client.replace(':', '_'),
+            self.now.strftime('%Y-%m-%d.%H-%M-%S'),
+            web2py_uuid())
+        return self.uuid
+
+    def user_agent(self):
+        from gluon.contrib import user_agent_parser
+        session = current.session
+        session._user_agent = session._user_agent or \
+            user_agent_parser.detect(self.env.http_user_agent)
+        return session._user_agent
+
+    def restful(self):
+        def wrapper(action,self=self):
+            def f(_action=action,_self=self,*a,**b):
+                self.is_restful = True
+                method = _self.env.request_method
+                if len(_self.args) and '.' in _self.args[-1]:
+                    _self.args[-1],_self.extension = _self.args[-1].rsplit('.',1)
+                if not method in ['GET','POST','DELETE','PUT']:
+                    raise HTTP(400,"invalid method")
+                rest_action = _action().get(method,None)
+                if not rest_action:
+                    raise HTTP(400,"method not supported")
+                try:
+                    return rest_action(*_self.args,**_self.vars)
+                except TypeError, e:
+                    exc_type, exc_value, exc_traceback = sys.exc_info()
+                    if len(traceback.extract_tb(exc_traceback))==1:
+                        raise HTTP(400,"invalid arguments")
+                    else:
+                        raise e
+            f.__doc__ = action.__doc__
+            f.__name__ = action.__name__
+            return f
+        return wrapper
+
+
+class Response(Storage):
+
+    """
+    defines the response object and the default values of its members
+    response.write(   ) can be used to write in the output html
+    """
+
+    def __init__(self):
+        self.status = 200
+        self.headers = Storage()
+        self.headers['X-Powered-By'] = 'web2py'
+        self.body = cStringIO.StringIO()
+        self.session_id = None
+        self.cookies = Cookie.SimpleCookie()
+        self.postprocessing = []
+        self.flash = ''            # used by the default view layout
+        self.meta = Storage()      # used by web2py_ajax.html
+        self.menu = []             # used by the default view layout
+        self.files = []            # used by web2py_ajax.html
+        self.generic_patterns = [] # patterns to allow generic views
+        self._vars = None
+        self._caller = lambda f: f()
+        self._view_environment = None
+        self._custom_commit = None
+        self._custom_rollback = None
+
+    def write(self, data, escape=True):
+        if not escape:
+            self.body.write(str(data))
+        else:
+            self.body.write(xmlescape(data))
+
+    def render(self, *a, **b):
+        from compileapp import run_view_in
+        if len(a) > 2:
+            raise SyntaxError, 'Response.render can be called with two arguments, at most'
+        elif len(a) == 2:
+            (view, self._vars) = (a[0], a[1])
+        elif len(a) == 1 and isinstance(a[0], str):
+            (view, self._vars) = (a[0], {})
+        elif len(a) == 1 and hasattr(a[0], 'read') and callable(a[0].read):
+            (view, self._vars) = (a[0], {})
+        elif len(a) == 1 and isinstance(a[0], dict):
+            (view, self._vars) = (None, a[0])
+        else:
+            (view, self._vars) = (None, {})
+        self._vars.update(b)
+        self._view_environment.update(self._vars)
+        if view:
+            import cStringIO
+            (obody, oview) = (self.body, self.view)
+            (self.body, self.view) = (cStringIO.StringIO(), view)
+            run_view_in(self._view_environment)
+            page = self.body.getvalue()
+            self.body.close()
+            (self.body, self.view) = (obody, oview)
+        else:
+            run_view_in(self._view_environment)
+            page = self.body.getvalue()
+        return page
+
+    def stream(
+        self,
+        stream,
+        chunk_size = DEFAULT_CHUNK_SIZE,
+        request=None,
+        ):
+        """
+        if a controller function::
+
+            return response.stream(file, 100)
+
+        the file content will be streamed at 100 bytes at the time
+        """
+
+        if isinstance(stream, (str, unicode)):
+            stream_file_or_304_or_206(stream,
+                                      chunk_size=chunk_size,
+                                      request=request,
+                                      headers=self.headers)
+
+        # ## the following is for backward compatibility
+
+        if hasattr(stream, 'name'):
+            filename = stream.name
+        else:
+            filename = None
+        keys = [item.lower() for item in self.headers]
+        if filename and not 'content-type' in keys:
+            self.headers['Content-Type'] = contenttype(filename)
+        if filename and not 'content-length' in keys:
+            try:
+                self.headers['Content-Length'] = \
+                    os.path.getsize(filename)
+            except OSError:
+                pass
+        if request and request.env.web2py_use_wsgi_file_wrapper:
+            wrapped = request.env.wsgi_file_wrapper(stream, chunk_size)
+        else:
+            wrapped = streamer(stream, chunk_size=chunk_size)
+        return wrapped
+
+    def download(self, request, db, chunk_size = DEFAULT_CHUNK_SIZE, attachment=True):
+        """
+        example of usage in controller::
+
+            def download():
+                return response.download(request, db)
+
+        downloads from http://..../download/filename
+        """
+
+        import contenttype as c
+        if not request.args:
+            raise HTTP(404)
+        name = request.args[-1]
+        items = re.compile('(?P<table>.*?)\.(?P<field>.*?)\..*')\
+                           .match(name)
+        if not items:
+            raise HTTP(404)
+        (t, f) = (items.group('table'), items.group('field'))
+        field = db[t][f]
+        try:
+            (filename, stream) = field.retrieve(name)
+        except IOError:
+            raise HTTP(404)
+        self.headers['Content-Type'] = c.contenttype(name)
+        if attachment:
+            self.headers['Content-Disposition'] = \
+                "attachment; filename=%s" % filename
+        return self.stream(stream, chunk_size = chunk_size, request=request)
+
+    def json(self, data, default=None):
+        return json(data, default = default or custom_json)
+
+    def xmlrpc(self, request, methods):
+        """
+        assuming::
+
+            def add(a, b):
+                return a+b
+
+        if a controller function \"func\"::
+
+            return response.xmlrpc(request, [add])
+
+        the controller will be able to handle xmlrpc requests for
+        the add function. Example::
+
+            import xmlrpclib
+            connection = xmlrpclib.ServerProxy('http://hostname/app/contr/func')
+            print connection.add(3, 4)
+
+        """
+
+        return handler(request, self, methods)
+
+    def toolbar(self):
+        from html import DIV, SCRIPT, BEAUTIFY, TAG, URL
+        BUTTON = TAG.button
+        admin = URL("admin","default","design",
+                    args=current.request.application)
+        from gluon.dal import thread
+        dbstats = [TABLE(*[TR(PRE(row[0]),'%.2fms' % (row[1]*1000)) \
+                               for row in i.db._timings]) \
+                       for i in thread.instances]        
+        u = web2py_uuid() 
+        return DIV(
+            BUTTON('design',_onclick="document.location='%s'" % admin),
+            BUTTON('request',_onclick="jQuery('#request-%s').slideToggle()"%u),
+            DIV(BEAUTIFY(current.request),_class="hidden",_id="request-%s"%u),
+            BUTTON('session',_onclick="jQuery('#session-%s').slideToggle()"%u),
+            DIV(BEAUTIFY(current.session),_class="hidden",_id="session-%s"%u),
+            BUTTON('response',_onclick="jQuery('#response-%s').slideToggle()"%u),
+            DIV(BEAUTIFY(current.response),_class="hidden",_id="response-%s"%u),
+            BUTTON('db stats',_onclick="jQuery('#db-stats-%s').slideToggle()"%u),
+            DIV(BEAUTIFY(dbstats),_class="hidden",_id="db-stats-%s"%u),
+            SCRIPT("jQuery('.hidden').hide()")
+            )
+
+class Session(Storage):
+
+    """
+    defines the session object and the default values of its members (None)
+    """
+
+    def connect(
+        self,
+        request,
+        response,
+        db=None,
+        tablename='web2py_session',
+        masterapp=None,
+        migrate=True,
+        separate = None,
+        check_client=False,
+        ):
+        """
+        separate can be separate=lambda(session_name): session_name[-2:]
+        and it is used to determine a session prefix.
+        separate can be True and it is set to session_name[-2:]
+        """
+        if separate == True:
+            separate = lambda session_name: session_name[-2:]
+        self._unlock(response)
+        if not masterapp:
+            masterapp = request.application
+        response.session_id_name = 'session_id_%s' % masterapp.lower()
+
+        if not db:
+            if global_settings.db_sessions is True or masterapp in global_settings.db_sessions:
+                return
+            response.session_new = False
+            client = request.client.replace(':', '.')
+            if response.session_id_name in request.cookies:
+                response.session_id = \
+                    request.cookies[response.session_id_name].value
+                if regex_session_id.match(response.session_id):
+                    response.session_filename = \
+                        os.path.join(up(request.folder), masterapp,
+                            'sessions', response.session_id)
+                else:
+                    response.session_id = None
+            if response.session_id:
+                try:
+                    response.session_file = \
+                        open(response.session_filename, 'rb+')
+                    try:
+                        portalocker.lock(response.session_file,
+                                portalocker.LOCK_EX)
+                        response.session_locked = True
+                        self.update(cPickle.load(response.session_file))
+                        response.session_file.seek(0)
+                        oc = response.session_filename.split('/')[-1].split('-')[0]
+                        if check_client and client!=oc:
+                            raise Exception, "cookie attack"
+                    finally:
+                        pass
+                        #This causes admin login to break. Must find out why.
+                        #self._close(response)
+                except:
+                    response.session_id = None
+            if not response.session_id:
+                uuid = web2py_uuid()
+                response.session_id = '%s-%s' % (client, uuid)
+                if separate:
+                    prefix = separate(response.session_id)
+                    response.session_id = '%s/%s' % (prefix,response.session_id)
+                response.session_filename = \
+                    os.path.join(up(request.folder), masterapp,
+                                 'sessions', response.session_id)
+                response.session_new = True
+        else:
+            if global_settings.db_sessions is not True:
+                global_settings.db_sessions.add(masterapp)
+            response.session_db = True
+            if response.session_file:
+                self._close(response)
+            if settings.global_settings.web2py_runtime_gae:
+                # in principle this could work without GAE
+                request.tickets_db = db
+            if masterapp == request.application:
+                table_migrate = migrate
+            else:
+                table_migrate = False
+            tname = tablename + '_' + masterapp
+            table = db.get(tname, None)
+            if table is None:
+                table = db.define_table(
+                    tname,
+                    db.Field('locked', 'boolean', default=False),
+                    db.Field('client_ip', length=64),
+                    db.Field('created_datetime', 'datetime',
+                             default=request.now),
+                    db.Field('modified_datetime', 'datetime'),
+                    db.Field('unique_key', length=64),
+                    db.Field('session_data', 'blob'),
+                    migrate=table_migrate,
+                    )
+            try:
+                key = request.cookies[response.session_id_name].value
+                (record_id, unique_key) = key.split(':')
+                if record_id == '0':
+                    raise Exception, 'record_id == 0'
+                rows = db(table.id == record_id).select()
+                if len(rows) == 0 or rows[0].unique_key != unique_key:
+                    raise Exception, 'No record'
+
+                 # rows[0].update_record(locked=True)
+
+                session_data = cPickle.loads(rows[0].session_data)
+                self.update(session_data)
+            except Exception:
+                record_id = None
+                unique_key = web2py_uuid()
+                session_data = {}
+            response._dbtable_and_field = \
+                (response.session_id_name, table, record_id, unique_key)
+            response.session_id = '%s:%s' % (record_id, unique_key)
+        response.cookies[response.session_id_name] = response.session_id
+        response.cookies[response.session_id_name]['path'] = '/'
+        self.__hash = hashlib.md5(str(self)).digest()
+        if self.flash:
+            (response.flash, self.flash) = (self.flash, None)
+
+    def is_new(self):
+        if self._start_timestamp:
+            return False
+        else:
+            self._start_timestamp = datetime.datetime.today()
+            return True
+
+    def is_expired(self, seconds = 3600):
+        now = datetime.datetime.today()
+        if not self._last_timestamp or \
+                self._last_timestamp + datetime.timedelta(seconds = seconds) > now:
+            self._last_timestamp = now
+            return False
+        else:
+            return True
+
+    def secure(self):
+        self._secure = True
+
+    def forget(self, response=None):
+        self._close(response)
+        self._forget = True
+
+    def _try_store_in_db(self, request, response):
+
+        # don't save if file-based sessions, no session id, or session being forgotten
+        if not response.session_db or not response.session_id or self._forget:
+            return
+
+        # don't save if no change to session
+        __hash = self.__hash
+        if __hash is not None:
+            del self.__hash
+            if __hash == hashlib.md5(str(self)).digest():
+                return
+
+        (record_id_name, table, record_id, unique_key) = \
+            response._dbtable_and_field
+        dd = dict(locked=False, client_ip=request.env.remote_addr,
+                  modified_datetime=request.now,
+                  session_data=cPickle.dumps(dict(self)),
+                  unique_key=unique_key)
+        if record_id:
+            table._db(table.id == record_id).update(**dd)
+        else:
+            record_id = table.insert(**dd)
+        response.cookies[response.session_id_name] = '%s:%s'\
+             % (record_id, unique_key)
+        response.cookies[response.session_id_name]['path'] = '/'
+
+    def _try_store_on_disk(self, request, response):
+
+        # don't save if sessions not not file-based
+        if response.session_db:
+            return
+
+        # don't save if no change to session
+        __hash = self.__hash
+        if __hash is not None:
+            del self.__hash
+            if __hash == hashlib.md5(str(self)).digest():
+                self._close(response)
+                return
+
+        if not response.session_id or self._forget:
+            self._close(response)
+            return
+
+        if response.session_new:
+            # Tests if the session sub-folder exists, if not, create it
+            session_folder = os.path.dirname(response.session_filename)
+            if not os.path.exists(session_folder):
+                os.mkdir(session_folder)
+            response.session_file = open(response.session_filename, 'wb')
+            portalocker.lock(response.session_file, portalocker.LOCK_EX)
+            response.session_locked = True
+
+        if response.session_file:
+            cPickle.dump(dict(self), response.session_file)
+            response.session_file.truncate()
+            self._close(response)
+
+    def _unlock(self, response):
+        if response and response.session_file and response.session_locked:
+            try:
+                portalocker.unlock(response.session_file)
+                response.session_locked = False
+            except: ### this should never happen but happens in Windows
+                pass
+
+    def _close(self, response):
+        if response and response.session_file:
+            self._unlock(response)
+            try:
+                response.session_file.close()
+                del response.session_file
+            except:
+                pass
+
+

ADDED   gluon/highlight.py
Index: gluon/highlight.py
==================================================================
--- /dev/null
+++ gluon/highlight.py
@@ -0,0 +1,334 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+"""
+
+import re
+import cgi
+
+__all__ = ['highlight']
+
+
+class Highlighter(object):
+
+    """
+    Do syntax highlighting.
+    """
+
+    def __init__(
+        self,
+        mode,
+        link=None,
+        styles={},
+        ):
+        """
+        Initialise highlighter:
+            mode = language (PYTHON, WEB2PY,C, CPP, HTML, HTML_PLAIN)
+        """
+
+        mode = mode.upper()
+        if link and link[-1] != '/':
+            link = link + '/'
+        self.link = link
+        self.styles = styles
+        self.output = []
+        self.span_style = None
+        if mode == 'WEB2PY':
+            (mode, self.suppress_tokens) = ('PYTHON', [])
+        elif mode == 'PYTHON':
+            self.suppress_tokens = ['GOTOHTML']
+        elif mode == 'CPP':
+            (mode, self.suppress_tokens) = ('C', [])
+        elif mode == 'C':
+            self.suppress_tokens = ['CPPKEYWORD']
+        elif mode == 'HTML_PLAIN':
+            (mode, self.suppress_tokens) = ('HTML', ['GOTOPYTHON'])
+        elif mode == 'HTML':
+            self.suppress_tokens = []
+        else:
+            raise SyntaxError, 'Unknown mode: %s' % mode
+        self.mode = mode
+
+    def c_tokenizer(
+        self,
+        token,
+        match,
+        style,
+        ):
+        """
+        Callback for C specific highlighting.
+        """
+
+        value = cgi.escape(match.group())
+        self.change_style(token, style)
+        self.output.append(value)
+
+    def python_tokenizer(
+        self,
+        token,
+        match,
+        style,
+        ):
+        """
+        Callback for python specific highlighting.
+        """
+
+        value = cgi.escape(match.group())
+        if token == 'MULTILINESTRING':
+            self.change_style(token, style)
+            self.output.append(value)
+            self.strMultilineString = match.group(1)
+            return 'PYTHONMultilineString'
+        elif token == 'ENDMULTILINESTRING':
+            if match.group(1) == self.strMultilineString:
+                self.output.append(value)
+                self.strMultilineString = ''
+                return 'PYTHON'
+        if style and style[:5] == 'link:':
+            self.change_style(None, None)
+            (url, style) = style[5:].split(';', 1)
+            if url == 'None' or url == '':
+                self.output.append('<span style="%s">%s</span>'
+                                    % (style, value))
+            else:
+                self.output.append('<a href="%s%s" style="%s">%s</a>'
+                                    % (url, value, style, value))
+        else:
+            self.change_style(token, style)
+            self.output.append(value)
+        if token == 'GOTOHTML':
+            return 'HTML'
+        return None
+
+    def html_tokenizer(
+        self,
+        token,
+        match,
+        style,
+        ):
+        """
+        Callback for HTML specific highlighting.
+        """
+
+        value = cgi.escape(match.group())
+        self.change_style(token, style)
+        self.output.append(value)
+        if token == 'GOTOPYTHON':
+            return 'PYTHON'
+        return None
+
+    all_styles = {
+        'C': (c_tokenizer, (
+            ('COMMENT', re.compile(r'//.*\r?\n'),
+             'color: green; font-style: italic'),
+            ('MULTILINECOMMENT', re.compile(r'/\*.*?\*/', re.DOTALL),
+             'color: green; font-style: italic'),
+            ('PREPROCESSOR', re.compile(r'\s*#.*?[^\\]\s*\n',
+             re.DOTALL), 'color: magenta; font-style: italic'),
+            ('PUNC', re.compile(r'[-+*!&|^~/%\=<>\[\]{}(),.:]'),
+             'font-weight: bold'),
+            ('NUMBER',
+             re.compile(r'0x[0-9a-fA-F]+|[+-]?\d+(\.\d+)?([eE][+-]\d+)?|\d+'),
+             'color: red'),
+            ('KEYWORD', re.compile(r'(sizeof|int|long|short|char|void|'
+              + r'signed|unsigned|float|double|'
+              + r'goto|break|return|continue|asm|'
+              + r'case|default|if|else|switch|while|for|do|'
+              + r'struct|union|enum|typedef|'
+              + r'static|register|auto|volatile|extern|const)(?![a-zA-Z0-9_])'),
+             'color:#185369; font-weight: bold'),
+            ('CPPKEYWORD',
+             re.compile(r'(class|private|protected|public|template|new|delete|'
+              + r'this|friend|using|inline|export|bool|throw|try|catch|'
+              + r'operator|typeid|virtual)(?![a-zA-Z0-9_])'),
+             'color: blue; font-weight: bold'),
+            ('STRING', re.compile(r'r?u?\'(.*?)(?<!\\)\'|"(.*?)(?<!\\)"'),
+             'color: #FF9966'),
+            ('IDENTIFIER', re.compile(r'[a-zA-Z_][a-zA-Z0-9_]*'),
+             None),
+            ('WHITESPACE', re.compile(r'[   \r\n]+'), 'Keep'),
+            )),
+        'PYTHON': (python_tokenizer, (
+            ('GOTOHTML', re.compile(r'\}\}'), 'color: red'),
+            ('PUNC', re.compile(r'[-+*!|&^~/%\=<>\[\]{}(),.:]'),
+             'font-weight: bold'),
+            ('NUMBER',
+             re.compile(r'0x[0-9a-fA-F]+|[+-]?\d+(\.\d+)?([eE][+-]\d+)?|\d+'
+             ), 'color: red'),
+            ('KEYWORD',
+             re.compile(r'(def|class|break|continue|del|exec|finally|pass|'
+              + r'print|raise|return|try|except|global|assert|lambda|'
+              + r'yield|for|while|if|elif|else|and|in|is|not|or|import|'
+              + r'from|True|False)(?![a-zA-Z0-9_])'),
+             'color:#185369; font-weight: bold'),
+            ('WEB2PY',
+             re.compile(r'(request|response|session|cache|redirect|local_import|HTTP|TR|XML|URL|BEAUTIFY|A|BODY|BR|B|CAT|CENTER|CODE|DIV|EM|EMBED|FIELDSET|LEGEND|FORM|H1|H2|H3|H4|H5|H6|IFRAME|HEAD|HR|HTML|I|IMG|INPUT|LABEL|LI|LINK|MARKMIN|MENU|META|OBJECT|OL|ON|OPTION|P|PRE|SCRIPT|SELECT|SPAN|STYLE|TABLE|THEAD|TBODY|TFOOT|TAG|TD|TEXTAREA|TH|TITLE|TT|T|UL|XHTML|IS_SLUG|IS_STRONG|IS_LOWER|IS_UPPER|IS_ALPHANUMERIC|IS_DATETIME|IS_DATETIME_IN_RANGE|IS_DATE|IS_DATE_IN_RANGE|IS_DECIMAL_IN_RANGE|IS_EMAIL|IS_EXPR|IS_FLOAT_IN_RANGE|IS_IMAGE|IS_INT_IN_RANGE|IS_IN_SET|IS_IPV4|IS_LIST_OF|IS_LENGTH|IS_MATCH|IS_EQUAL_TO|IS_EMPTY_OR|IS_NULL_OR|IS_NOT_EMPTY|IS_TIME|IS_UPLOAD_FILENAME|IS_URL|CLEANUP|CRYPT|IS_IN_DB|IS_NOT_IN_DB|DAL|Field|SQLFORM|SQLTABLE|xmlescape|embed64)(?![a-zA-Z0-9_])'
+             ), 'link:%(link)s;text-decoration:None;color:#FF5C1F;'),
+            ('MAGIC', re.compile(r'self|None'),
+             'color:#185369; font-weight: bold'),
+            ('MULTILINESTRING', re.compile(r'r?u?(\'\'\'|""")'),
+             'color: #FF9966'),
+            ('STRING', re.compile(r'r?u?\'(.*?)(?<!\\)\'|"(.*?)(?<!\\)"'
+             ), 'color: #FF9966'),
+            ('IDENTIFIER', re.compile(r'[a-zA-Z_][a-zA-Z0-9_]*'),
+             None),
+            ('COMMENT', re.compile(r'\#.*\r?\n'),
+             'color: green; font-style: italic'),
+            ('WHITESPACE', re.compile(r'[   \r\n]+'), 'Keep'),
+            )),
+        'PYTHONMultilineString': (python_tokenizer,
+                                  (('ENDMULTILINESTRING',
+                                  re.compile(r'.*?("""|\'\'\')',
+                                  re.DOTALL), 'color: darkred'), )),
+        'HTML': (html_tokenizer, (
+            ('GOTOPYTHON', re.compile(r'\{\{'), 'color: red'),
+            ('COMMENT', re.compile(r'<!--[^>]*-->|<!>'),
+             'color: green; font-style: italic'),
+            ('XMLCRAP', re.compile(r'<![^>]*>'),
+             'color: blue; font-style: italic'),
+            ('SCRIPT', re.compile(r'<script .*?</script>', re.IGNORECASE
+              + re.DOTALL), 'color: black'),
+            ('TAG', re.compile(r'</?\s*[a-zA-Z0-9]+'),
+             'color: darkred; font-weight: bold'),
+            ('ENDTAG', re.compile(r'/?>'),
+             'color: darkred; font-weight: bold'),
+            )),
+        }
+
+    def highlight(self, data):
+        """
+        Syntax highlight some python code.
+        Returns html version of code.
+        """
+
+        i = 0
+        mode = self.mode
+        while i < len(data):
+            for (token, o_re, style) in Highlighter.all_styles[mode][1]:
+                if not token in self.suppress_tokens:
+                    match = o_re.match(data, i)
+                    if match:
+                        if style:
+                            new_mode = \
+                                Highlighter.all_styles[mode][0](self,
+                                    token, match, style
+                                     % dict(link=self.link))
+                        else:
+                            new_mode = \
+                                Highlighter.all_styles[mode][0](self,
+                                    token, match, style)
+                        if new_mode != None:
+                            mode = new_mode
+                        i += max(1, len(match.group()))
+                        break
+            else:
+                self.change_style(None, None)
+                self.output.append(data[i])
+                i += 1
+        self.change_style(None, None)
+        return ''.join(self.output).expandtabs(4)
+
+    def change_style(self, token, style):
+        """
+        Generate output to change from existing style to another style only.
+        """
+
+        if token in self.styles:
+            style = self.styles[token]
+        if self.span_style != style:
+            if style != 'Keep':
+                if self.span_style != None:
+                    self.output.append('</span>')
+                if style != None:
+                    self.output.append('<span style="%s">' % style)
+                self.span_style = style
+
+
+def highlight(
+    code,
+    language,
+    link='/examples/globals/vars/',
+    counter=1,
+    styles={},
+    highlight_line=None,
+    attributes={},
+    ):
+    if not 'CODE' in styles:
+        code_style = """
+        font-size: 11px;
+        font-family: Bitstream Vera Sans Mono,monospace;
+        background-color: transparent;
+        margin: 0;
+        padding: 5px;
+        border: none;
+        overflow: auto;
+        white-space: pre !important;\n"""
+    else:
+        code_style = styles['CODE']
+    if not 'LINENUMBERS' in styles:
+        linenumbers_style = """
+        font-size: 11px;
+        font-family: Bitstream Vera Sans Mono,monospace;
+        background-color: transparent;
+        margin: 0;
+        padding: 5px;
+        border: none;
+        color: #A0A0A0;\n"""
+    else:
+        linenumbers_style = styles['LINENUMBERS']
+    if not 'LINEHIGHLIGHT' in styles:
+        linehighlight_style = "background-color: #EBDDE2;"
+    else:
+        linehighlight_style = styles['LINEHIGHLIGHT']
+
+    if language and language.upper() in ['PYTHON', 'C', 'CPP', 'HTML',
+            'WEB2PY']:
+        code = Highlighter(language, link, styles).highlight(code)
+    else:
+        code = cgi.escape(code)
+    lines = code.split('\n')
+
+    if counter is None:
+        linenumbers = [''] * len(lines)
+    elif isinstance(counter, str):
+        linenumbers = [cgi.escape(counter)] * len(lines)
+    else:
+        linenumbers = [str(i + counter) + '.' for i in
+                               xrange(len(lines))]
+
+    if highlight_line:
+        if counter and not isinstance(counter, str):
+            lineno = highlight_line - counter
+        else:
+            lineno = highlight_line
+        if lineno<len(lines):
+            lines[lineno] = '<div style="%s">%s</div>' % (linehighlight_style, lines[lineno])
+            linenumbers[lineno] = '<div style="%s">%s</div>' % (linehighlight_style, linenumbers[lineno])
+
+    code = '<br/>'.join(lines)
+    numbers = '<br/>'.join(linenumbers)
+
+    items = attributes.items()
+    fa = ' '.join([key[1:].lower() for (key, value) in items if key[:1]
+                   == '_' and value == None] + ['%s="%s"'
+                   % (key[1:].lower(), str(value).replace('"', "'"))
+                  for (key, value) in attributes.items() if key[:1]
+                   == '_' and value])
+    if fa:
+        fa = ' ' + fa
+    return '<table%s><tr valign="top"><td style="width:40px; text-align: right;"><pre style="%s">%s</pre></td><td><pre style="%s">%s</pre></td></tr></table>'\
+         % (fa, linenumbers_style, numbers, code_style, code)
+
+
+if __name__ == '__main__':
+    import sys
+    argfp = open(sys.argv[1])
+    data = argfp.read()
+    argfp.close()
+    print '<html><body>' + highlight(data, sys.argv[2])\
+         + '</body></html>'
+

ADDED   gluon/html.py
Index: gluon/html.py
==================================================================
--- /dev/null
+++ gluon/html.py
@@ -0,0 +1,2239 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+"""
+
+import cgi
+import os
+import re
+import copy
+import types
+import urllib
+import base64
+import sanitizer
+import rewrite
+import itertools
+import decoder
+import copy_reg
+import cPickle
+import marshal
+from HTMLParser import HTMLParser
+from htmlentitydefs import name2codepoint
+from contrib.markmin.markmin2html import render
+
+from storage import Storage
+from highlight import highlight
+from utils import web2py_uuid, hmac_hash
+
+import hmac
+import hashlib
+
+regex_crlf = re.compile('\r|\n')
+
+join = ''.join
+
+__all__ = [
+    'A',
+    'B',
+    'BEAUTIFY',
+    'BODY',
+    'BR',
+    'BUTTON',
+    'CENTER',
+    'CAT',
+    'CODE',
+    'DIV',
+    'EM',
+    'EMBED',
+    'FIELDSET',
+    'FORM',
+    'H1',
+    'H2',
+    'H3',
+    'H4',
+    'H5',
+    'H6',
+    'HEAD',
+    'HR',
+    'HTML',
+    'I',
+    'IFRAME',
+    'IMG',
+    'INPUT',
+    'LABEL',
+    'LEGEND',
+    'LI',
+    'LINK',
+    'OL',
+    'UL',
+    'MARKMIN',
+    'MENU',
+    'META',
+    'OBJECT',
+    'ON',
+    'OPTION',
+    'P',
+    'PRE',
+    'SCRIPT',
+    'OPTGROUP',
+    'SELECT',
+    'SPAN',
+    'STYLE',
+    'TABLE',
+    'TAG',
+    'TD',
+    'TEXTAREA',
+    'TH',
+    'THEAD',
+    'TBODY',
+    'TFOOT',
+    'TITLE',
+    'TR',
+    'TT',
+    'URL',
+    'XHTML',
+    'XML',
+    'xmlescape',
+    'embed64',
+    ]
+
+
+def xmlescape(data, quote = True):
+    """
+    returns an escaped string of the provided data
+
+    :param data: the data to be escaped
+    :param quote: optional (default False)
+    """
+
+    # first try the xml function
+    if hasattr(data,'xml') and callable(data.xml):
+        return data.xml()
+
+    # otherwise, make it a string
+    if not isinstance(data, (str, unicode)):
+        data = str(data)
+    elif isinstance(data, unicode):
+        data = data.encode('utf8', 'xmlcharrefreplace')
+
+    # ... and do the escaping
+    data = cgi.escape(data, quote).replace("'","'")
+    return data
+
+
+def URL(
+    a=None,
+    c=None,
+    f=None,
+    r=None,
+    args=[],
+    vars={},
+    anchor='',
+    extension=None,
+    env=None,
+    hmac_key=None,
+    hash_vars=True,
+    salt=None,
+    user_signature=None,
+    scheme=None,
+    host=None,
+    port=None,
+    ):
+    """
+    generate a URL
+
+    example::
+
+        >>> str(URL(a='a', c='c', f='f', args=['x', 'y', 'z'],
+        ...     vars={'p':1, 'q':2}, anchor='1'))
+        '/a/c/f/x/y/z?p=1&q=2#1'
+
+        >>> str(URL(a='a', c='c', f='f', args=['x', 'y', 'z'],
+        ...     vars={'p':(1,3), 'q':2}, anchor='1'))
+        '/a/c/f/x/y/z?p=1&p=3&q=2#1'
+
+        >>> str(URL(a='a', c='c', f='f', args=['x', 'y', 'z'],
+        ...     vars={'p':(3,1), 'q':2}, anchor='1'))
+        '/a/c/f/x/y/z?p=3&p=1&q=2#1'
+
+        >>> str(URL(a='a', c='c', f='f', anchor='1+2'))
+        '/a/c/f#1%2B2'
+
+        >>> str(URL(a='a', c='c', f='f', args=['x', 'y', 'z'],
+        ...     vars={'p':(1,3), 'q':2}, anchor='1', hmac_key='key'))
+        '/a/c/f/x/y/z?p=1&p=3&q=2&_signature=5d06bb8a4a6093dd325da2ee591c35c61afbd3c6#1'
+
+    generates a url '/a/c/f' corresponding to application a, controller c
+    and function f. If r=request is passed, a, c, f are set, respectively,
+    to r.application, r.controller, r.function.
+
+    The more typical usage is:
+
+    URL(r=request, f='index') that generates a url for the index function
+    within the present application and controller.
+
+    :param a: application (default to current if r is given)
+    :param c: controller (default to current if r is given)
+    :param f: function (default to current if r is given)
+    :param r: request (optional)
+    :param args: any arguments (optional)
+    :param vars: any variables (optional)
+    :param anchor: anchorname, without # (optional)
+    :param hmac_key: key to use when generating hmac signature (optional)
+    :param hash_vars: which of the vars to include in our hmac signature
+        True (default) - hash all vars, False - hash none of the vars,
+        iterable - hash only the included vars ['key1','key2']
+    :param scheme: URI scheme (True, 'http' or 'https', etc); forces absolute URL (optional)
+    :param host: string to force absolute URL with host (True means http_host)
+    :param port: optional port number (forces absolute URL)
+
+    :raises SyntaxError: when no application, controller or function is
+        available
+    :raises SyntaxError: when a CRLF is found in the generated url
+    """
+
+    if args in (None,[]): args = []
+    vars = vars or {}
+    application = None
+    controller = None
+    function = None
+
+    if not r:
+        if a and not c and not f: (f,a,c)=(a,c,f)
+        elif a and c and not f: (c,f,a)=(a,c,f)
+        from globals import current
+        if hasattr(current,'request'):
+            r = current.request
+    if r:
+        application = r.application
+        controller = r.controller
+        function = r.function
+        env = r.env
+        if extension is None and r.extension != 'html':
+            extension = r.extension
+    if a:
+        application = a
+    if c:
+        controller = c
+    if f:
+        if not isinstance(f, str):
+            function = f.__name__
+        elif '.' in f:
+            function, extension = f.split('.', 1)
+        else:
+            function = f
+
+    function2 = '%s.%s' % (function,extension or 'html')
+
+    if not (application and controller and function):
+        raise SyntaxError, 'not enough information to build the url'
+
+    if not isinstance(args, (list, tuple)):
+        args = [args]
+    other = args and urllib.quote('/' + '/'.join([str(x) for x in args])) or ''
+    if other.endswith('/'):
+        other += '/'    # add trailing slash to make last trailing empty arg explicit
+
+    if vars.has_key('_signature'): vars.pop('_signature')
+    list_vars = []
+    for (key, vals) in sorted(vars.items()):
+        if not isinstance(vals, (list, tuple)):
+            vals = [vals]
+        for val in vals:
+            list_vars.append((key, val))
+
+    if user_signature:
+        from globals import current
+        if current.session.auth:
+            hmac_key = current.session.auth.hmac_key
+
+    if hmac_key:
+        # generate an hmac signature of the vars & args so can later
+        # verify the user hasn't messed with anything
+
+        h_args = '/%s/%s/%s%s' % (application, controller, function2, other)
+
+        # how many of the vars should we include in our hash?
+        if hash_vars is True:       # include them all
+            h_vars = list_vars
+        elif hash_vars is False:    # include none of them
+            h_vars = ''
+        else:                       # include just those specified
+            if hash_vars and not isinstance(hash_vars, (list, tuple)):
+                hash_vars = [hash_vars]
+            h_vars = [(k, v) for (k, v) in list_vars if k in hash_vars]
+
+        # re-assembling the same way during hash authentication
+        message = h_args + '?' + urllib.urlencode(sorted(h_vars))
+
+        sig = hmac_hash(message,hmac_key,salt=salt)
+        # add the signature into vars
+        list_vars.append(('_signature', sig))
+
+    if list_vars:
+        other += '?%s' % urllib.urlencode(list_vars)
+    if anchor:
+        other += '#' + urllib.quote(str(anchor))
+    if extension:
+        function += '.' + extension
+
+    if regex_crlf.search(join([application, controller, function, other])):
+        raise SyntaxError, 'CRLF Injection Detected'
+    url = rewrite.url_out(r, env, application, controller, function,
+                          args, other, scheme, host, port)
+    return url
+
+
+def verifyURL(request, hmac_key=None, hash_vars=True, salt=None, user_signature=None):
+    """
+    Verifies that a request's args & vars have not been tampered with by the user
+
+    :param request: web2py's request object
+    :param hmac_key: the key to authenticate with, must be the same one previously
+                    used when calling URL()
+    :param hash_vars: which vars to include in our hashing. (Optional)
+                    Only uses the 1st value currently
+                    True (or undefined) means all, False none,
+                    an iterable just the specified keys
+
+    do not call directly. Use instead:
+
+    URL.verify(hmac_key='...')
+
+    the key has to match the one used to generate the URL.
+
+        >>> r = Storage()
+        >>> gv = Storage(p=(1,3),q=2,_signature='5d06bb8a4a6093dd325da2ee591c35c61afbd3c6')
+        >>> r.update(dict(application='a', controller='c', function='f'))
+        >>> r['args'] = ['x', 'y', 'z']
+        >>> r['get_vars'] = gv
+        >>> verifyURL(r, 'key')
+        True
+        >>> verifyURL(r, 'kay')
+        False
+        >>> r.get_vars.p = (3, 1)
+        >>> verifyURL(r, 'key')
+        True
+        >>> r.get_vars.p = (3, 2)
+        >>> verifyURL(r, 'key')
+        False
+
+    """
+
+    if not request.get_vars.has_key('_signature'):
+        return False # no signature in the request URL
+
+    # check if user_signature requires
+    if user_signature:
+        from globals import current
+        if not current.session:
+            return False
+        hmac_key = current.session.auth.hmac_key
+    if not hmac_key:
+        return False
+
+    # get our sig from request.get_vars for later comparison
+    original_sig = request.get_vars._signature
+
+    # now generate a new hmac for the remaining args & vars
+    vars, args = request.get_vars, request.args
+
+    # remove the signature var since it was not part of our signed message
+    request.get_vars.pop('_signature')
+
+    # join all the args & vars into one long string
+
+    # always include all of the args
+    other = args and urllib.quote('/' + '/'.join([str(x) for x in args])) or ''
+    h_args = '/%s/%s/%s.%s%s' % (request.application,
+                                 request.controller,
+                                 request.function,
+                                 request.extension,
+                                 other)
+
+    # but only include those vars specified (allows more flexibility for use with
+    # forms or ajax)
+
+    list_vars = []
+    for (key, vals) in sorted(vars.items()):
+        if not isinstance(vals, (list, tuple)):
+            vals = [vals]
+        for val in vals:
+            list_vars.append((key, val))
+
+    # which of the vars are to be included?
+    if hash_vars is True:       # include them all
+        h_vars = list_vars
+    elif hash_vars is False:    # include none of them
+        h_vars = ''
+    else:                       # include just those specified
+        # wrap in a try - if the desired vars have been removed it'll fail
+        try:
+            if hash_vars and not isinstance(hash_vars, (list, tuple)):
+                hash_vars = [hash_vars]
+            h_vars = [(k, v) for (k, v) in list_vars if k in hash_vars]
+        except:
+            # user has removed one of our vars! Immediate fail
+            return False
+    # build the full message string with both args & vars
+    message = h_args + '?' + urllib.urlencode(sorted(h_vars))
+
+    # hash with the hmac_key provided
+    sig = hmac_hash(message,str(hmac_key),salt=salt)
+
+    # put _signature back in get_vars just in case a second call to URL.verify is performed
+    # (otherwise it'll immediately return false)
+    request.get_vars['_signature'] = original_sig
+
+    # return whether or not the signature in the request matched the one we just generated
+    # (I.E. was the message the same as the one we originally signed)
+    return original_sig == sig
+
+URL.verify = verifyURL
+
+ON = True
+
+
+class XmlComponent(object):
+    """
+    Abstract root for all Html components
+    """
+
+    # TODO: move some DIV methods to here
+
+    def xml(self):
+        raise NotImplementedError
+
+
+class XML(XmlComponent):
+    """
+    use it to wrap a string that contains XML/HTML so that it will not be
+    escaped by the template
+
+    example:
+
+    >>> XML('<h1>Hello</h1>').xml()
+    '<h1>Hello</h1>'
+    """
+
+    def __init__(
+        self,
+        text,
+        sanitize = False,
+        permitted_tags = [
+            'a',
+            'b',
+            'blockquote',
+            'br/',
+            'i',
+            'li',
+            'ol',
+            'ul',
+            'p',
+            'cite',
+            'code',
+            'pre',
+            'img/',
+            'h1','h2','h3','h4','h5','h6',
+            'table','tr','td','div',
+            ],
+        allowed_attributes = {
+            'a': ['href', 'title'],
+            'img': ['src', 'alt'],
+            'blockquote': ['type'],
+            'td': ['colspan'],
+            },
+        ):
+        """
+        :param text: the XML text
+        :param sanitize: sanitize text using the permitted tags and allowed
+            attributes (default False)
+        :param permitted_tags: list of permitted tags (default: simple list of
+            tags)
+        :param allowed_attributes: dictionary of allowed attributed (default
+            for A, IMG and BlockQuote).
+            The key is the tag; the value is a list of allowed attributes.
+        """
+
+        if sanitize:
+            text = sanitizer.sanitize(text, permitted_tags,
+                    allowed_attributes)
+        if isinstance(text, unicode):
+            text = text.encode('utf8', 'xmlcharrefreplace')
+        elif not isinstance(text, str):
+            text = str(text)
+        self.text = text
+
+    def xml(self):
+        return self.text
+
+    def __str__(self):
+        return self.xml()
+
+    def __add__(self,other):
+        return '%s%s' % (self,other)
+
+    def __radd__(self,other):
+        return '%s%s' % (other,self)
+
+    def __cmp__(self,other):
+        return cmp(str(self),str(other))
+
+    def __hash__(self):
+        return hash(str(self))
+
+    def __getattr__(self,name):
+        return getattr(str(self),name)
+
+    def __getitem__(self,i):
+        return str(self)[i]
+
+    def __getslice__(self,i,j):
+        return str(self)[i:j]
+
+    def __iter__(self):
+        for c in str(self): yield c
+
+    def __len__(self):
+        return len(str(self))
+
+    def flatten(self,render=None):
+        """
+        return the text stored by the XML object rendered by the render function
+        """
+        if render:
+            return render(self.text,None,{})
+        return self.text
+
+    def elements(self, *args, **kargs):
+        """
+        to be considered experimental since the behavior of this method is questionable
+        another options could be TAG(self.text).elements(*args,**kargs)
+        """
+        return []
+
+### important to allow safe session.flash=T(....)
+def XML_unpickle(data):
+    return marshal.loads(data)
+def XML_pickle(data):
+    return XML_unpickle, (marshal.dumps(str(data)),)
+copy_reg.pickle(XML, XML_pickle, XML_unpickle)
+
+
+
+class DIV(XmlComponent):
+    """
+    HTML helper, for easy generating and manipulating a DOM structure.
+    Little or no validation is done.
+
+    Behaves like a dictionary regarding updating of attributes.
+    Behaves like a list regarding inserting/appending components.
+
+    example::
+
+        >>> DIV('hello', 'world', _style='color:red;').xml()
+        '<div style=\"color:red;\">helloworld</div>'
+
+    all other HTML helpers are derived from DIV.
+
+    _something=\"value\" attributes are transparently translated into
+    something=\"value\" HTML attributes
+    """
+
+    # name of the tag, subclasses should update this
+    # tags ending with a '/' denote classes that cannot
+    # contain components
+    tag = 'div'
+
+    def __init__(self, *components, **attributes):
+        """
+        :param *components: any components that should be nested in this element
+        :param **attributes: any attributes you want to give to this element
+
+        :raises SyntaxError: when a stand alone tag receives components
+        """
+
+        if self.tag[-1:] == '/' and components:
+            raise SyntaxError, '<%s> tags cannot have components'\
+                 % self.tag
+        if len(components) == 1 and isinstance(components[0], (list,tuple)):
+            self.components = list(components[0])
+        else:
+            self.components = list(components)
+        self.attributes = attributes
+        self._fixup()
+        # converts special attributes in components attributes
+        self._postprocessing()
+        self.parent = None
+        for c in self.components:
+            self._setnode(c)
+
+    def update(self, **kargs):
+        """
+        dictionary like updating of the tag attributes
+        """
+
+        for (key, value) in kargs.items():
+            self[key] = value
+        return self
+
+    def append(self, value):
+        """
+        list style appending of components
+
+        >>> a=DIV()
+        >>> a.append(SPAN('x'))
+        >>> print a
+        <div><span>x</span></div>
+        """
+        self._setnode(value)
+        ret = self.components.append(value)
+        self._fixup()
+        return ret
+
+    def insert(self, i, value):
+        """
+        list style inserting of components
+
+        >>> a=DIV()
+        >>> a.insert(0,SPAN('x'))
+        >>> print a
+        <div><span>x</span></div>
+        """
+        self._setnode(value)
+        ret = self.components.insert(i, value)
+        self._fixup()
+        return ret
+
+    def __getitem__(self, i):
+        """
+        gets attribute with name 'i' or component #i.
+        If attribute 'i' is not found returns None
+
+        :param i: index
+           if i is a string: the name of the attribute
+           otherwise references to number of the component
+        """
+
+        if isinstance(i, str):
+            try:
+                return self.attributes[i]
+            except KeyError:
+                return None
+        else:
+            return self.components[i]
+
+    def __setitem__(self, i, value):
+        """
+        sets attribute with name 'i' or component #i.
+
+        :param i: index
+           if i is a string: the name of the attribute
+           otherwise references to number of the component
+        :param value: the new value
+        """
+        self._setnode(value)
+        if isinstance(i, (str, unicode)):
+            self.attributes[i] = value
+        else:
+            self.components[i] = value
+
+    def __delitem__(self, i):
+        """
+        deletes attribute with name 'i' or component #i.
+
+        :param i: index
+           if i is a string: the name of the attribute
+           otherwise references to number of the component
+        """
+
+        if isinstance(i, str):
+            del self.attributes[i]
+        else:
+            del self.components[i]
+
+    def __len__(self):
+        """
+        returns the number of included components
+        """
+        return len(self.components)
+
+    def __nonzero__(self):
+        """
+        always return True
+        """
+        return True
+
+    def _fixup(self):
+        """
+        Handling of provided components.
+
+        Nothing to fixup yet. May be overridden by subclasses,
+        eg for wrapping some components in another component or blocking them.
+        """
+        return
+
+    def _wrap_components(self, allowed_parents,
+                         wrap_parent = None,
+                         wrap_lambda = None):
+        """
+        helper for _fixup. Checks if a component is in allowed_parents,
+        otherwise wraps it in wrap_parent
+
+        :param allowed_parents: (tuple) classes that the component should be an
+            instance of
+        :param wrap_parent: the class to wrap the component in, if needed
+        :param wrap_lambda: lambda to use for wrapping, if needed
+
+        """
+        components = []
+        for c in self.components:
+            if isinstance(c, allowed_parents):
+                pass
+            elif wrap_lambda:
+                c = wrap_lambda(c)
+            else:
+                c = wrap_parent(c)
+            if isinstance(c,DIV):
+                c.parent = self
+            components.append(c)
+        self.components = components
+
+    def _postprocessing(self):
+        """
+        Handling of attributes (normally the ones not prefixed with '_').
+
+        Nothing to postprocess yet. May be overridden by subclasses
+        """
+        return
+
+    def _traverse(self, status, hideerror=False):
+        # TODO: docstring
+        newstatus = status
+        for c in self.components:
+            if hasattr(c, '_traverse') and callable(c._traverse):
+                c.vars = self.vars
+                c.request_vars = self.request_vars
+                c.errors = self.errors
+                c.latest = self.latest
+                c.session = self.session
+                c.formname = self.formname
+                c['hideerror']=hideerror
+                newstatus = c._traverse(status,hideerror) and newstatus
+
+        # for input, textarea, select, option
+        # deal with 'value' and 'validation'
+
+        name = self['_name']
+        if newstatus:
+            newstatus = self._validate()
+            self._postprocessing()
+        elif 'old_value' in self.attributes:
+            self['value'] = self['old_value']
+            self._postprocessing()
+        elif name and name in self.vars:
+            self['value'] = self.vars[name]
+            self._postprocessing()
+        if name:
+            self.latest[name] = self['value']
+        return newstatus
+
+    def _validate(self):
+        """
+        nothing to validate yet. May be overridden by subclasses
+        """
+        return True
+
+    def _setnode(self,value):
+        if isinstance(value,DIV):
+            value.parent = self
+
+    def _xml(self):
+        """
+        helper for xml generation. Returns separately:
+        - the component attributes
+        - the generated xml of the inner components
+
+        Component attributes start with an underscore ('_') and
+        do not have a False or None value. The underscore is removed.
+        A value of True is replaced with the attribute name.
+
+        :returns: tuple: (attributes, components)
+        """
+
+        # get the attributes for this component
+        # (they start with '_', others may have special meanings)
+        fa = ''
+        for key in sorted(self.attributes):
+            value = self[key]
+            if key[:1] != '_':
+                continue
+            name = key[1:]
+            if value is True:
+                value = name
+            elif value is False or value is None:
+                continue
+            fa += ' %s="%s"' % (name, xmlescape(value, True))
+
+        # get the xml for the inner components
+        co = join([xmlescape(component) for component in
+                     self.components])
+
+        return (fa, co)
+
+    def xml(self):
+        """
+        generates the xml for this component.
+        """
+
+        (fa, co) = self._xml()
+
+        if not self.tag:
+            return co
+
+        if self.tag[-1:] == '/':
+            # <tag [attributes] />
+            return '<%s%s />' % (self.tag[:-1], fa)
+
+        # else: <tag [attributes]>  inner components xml </tag>
+        return '<%s%s>%s</%s>' % (self.tag, fa, co, self.tag)
+
+    def __str__(self):
+        """
+        str(COMPONENT) returns equals COMPONENT.xml()
+        """
+
+        return self.xml()
+
+    def flatten(self, render=None):
+        """
+        return the text stored by the DIV object rendered by the render function
+        the render function must take text, tagname, and attributes
+        render=None is equivalent to render=lambda text, tag, attr: text
+
+        >>> markdown = lambda text,tag=None,attributes={}: \
+                        {None: re.sub('\s+',' ',text), \
+                         'h1':'#'+text+'\\n\\n', \
+                         'p':text+'\\n'}.get(tag,text)
+        >>> a=TAG('<h1>Header</h1><p>this is a     test</p>')
+        >>> a.flatten(markdown)
+        '#Header\\n\\nthis is a test\\n'
+        """
+
+        text = ''
+        for c in self.components:
+            if isinstance(c,XmlComponent):
+                s=c.flatten(render)
+            elif render:
+                s=render(str(c))
+            else:
+                s=str(c)
+            text+=s
+        if render:
+            text = render(text,self.tag,self.attributes)
+        return text
+
+    regex_tag=re.compile('^[\w\-\:]+')
+    regex_id=re.compile('#([\w\-]+)')
+    regex_class=re.compile('\.([\w\-]+)')
+    regex_attr=re.compile('\[([\w\-\:]+)=(.*?)\]')
+
+
+    def elements(self, *args, **kargs):
+        """
+        find all component that match the supplied attribute dictionary,
+        or None if nothing could be found
+
+        All components of the components are searched.
+
+        >>> a = DIV(DIV(SPAN('x'),3,DIV(SPAN('y'))))
+        >>> for c in a.elements('span',first_only=True): c[0]='z'
+        >>> print a
+        <div><div><span>z</span>3<div><span>y</span></div></div></div>
+        >>> for c in a.elements('span'): c[0]='z'
+        >>> print a
+        <div><div><span>z</span>3<div><span>z</span></div></div></div>
+
+        It also supports a syntax compatible with jQuery
+
+        >>> a=TAG('<div><span><a id="1-1" u:v=$>hello</a></span><p class="this is a test">world</p></div>')
+        >>> for e in a.elements('div a#1-1, p.is'): print e.flatten()
+        hello
+        world
+        >>> for e in a.elements('#1-1'): print e.flatten()
+        hello
+        >>> a.elements('a[u:v=$]')[0].xml()
+        '<a id="1-1" u:v="$">hello</a>'
+
+        >>> a=FORM( INPUT(_type='text'), SELECT(range(1)), TEXTAREA() )
+        >>> for c in a.elements('input, select, textarea'): c['_disabled'] = 'disabled'
+        >>> a.xml()
+        '<form action="" enctype="multipart/form-data" method="post"><input disabled="disabled" type="text" /><select disabled="disabled"><option value="0">0</option></select><textarea cols="40" disabled="disabled" rows="10"></textarea></form>'
+        """
+        if len(args)==1:
+            args = [a.strip() for a in args[0].split(',')]
+        if len(args)>1:
+            subset = [self.elements(a,**kargs) for a in args]
+            return reduce(lambda a,b:a+b,subset,[])
+        elif len(args)==1:
+            items = args[0].split()
+            if len(items)>1:
+                subset=[a.elements(' '.join(items[1:]),**kargs) for a in self.elements(items[0])]
+                return reduce(lambda a,b:a+b,subset,[])
+            else:
+                item=items[0]
+                if '#' in item or '.' in item or '[' in item:
+                    match_tag = self.regex_tag.search(item)
+                    match_id = self.regex_id.search(item)
+                    match_class = self.regex_class.search(item)
+                    match_attr = self.regex_attr.finditer(item)
+                    args = []
+                    if match_tag: args = [match_tag.group()]
+                    if match_id: kargs['_id'] = match_id.group(1)
+                    if match_class: kargs['_class'] = re.compile('(?<!\w)%s(?!\w)' % \
+                       match_class.group(1).replace('-','\\-').replace(':','\\:'))
+                    for item in match_attr:
+                        kargs['_'+item.group(1)]=item.group(2)
+                    return self.elements(*args,**kargs)
+        # make a copy of the components
+        matches = []
+        first_only = False
+        if kargs.has_key("first_only"):
+            first_only = kargs["first_only"]
+            del kargs["first_only"]
+        # check if the component has an attribute with the same
+        # value as provided
+        check = True
+        tag = getattr(self,'tag').replace("/","")
+        if args and tag not in args:
+            check = False
+        for (key, value) in kargs.items():
+            if isinstance(value,(str,int)):
+                if self[key] != str(value):
+                    check = False
+            elif key in self.attributes:
+                if not value.search(str(self[key])):
+                    check = False
+            else:
+                check = False
+        if 'find' in kargs:
+            find = kargs['find']
+            for c in self.components:
+                if isinstance(find,(str,int)):
+                    if isinstance(c,str) and str(find) in c:
+                        check = True
+                else:
+                    if isinstance(c,str) and find.search(c):
+                        check = True
+        # if found, return the component
+        if check:
+            matches.append(self)
+            if first_only:
+                return matches
+        # loop the copy
+        for c in self.components:
+            if isinstance(c, XmlComponent):
+                kargs['first_only'] = first_only
+                child_matches = c.elements( *args,  **kargs )
+                if first_only  and len(child_matches) != 0:
+                    return child_matches
+                matches.extend( child_matches )
+        return matches
+
+
+    def element(self, *args, **kargs):
+        """
+        find the first component that matches the supplied attribute dictionary,
+        or None if nothing could be found
+
+        Also the components of the components are searched.
+        """
+        kargs['first_only'] = True
+        elements = self.elements(*args, **kargs)
+        if not elements:
+            # we found nothing
+            return None
+        return elements[0]
+
+    def siblings(self,*args,**kargs):
+        """
+        find all sibling components that match the supplied argument list
+        and attribute dictionary, or None if nothing could be found
+        """
+        sibs = [s for s in self.parent.components if not s == self]
+        matches = []
+        first_only = False
+        if kargs.has_key("first_only"):
+            first_only = kargs["first_only"]
+            del kargs["first_only"]
+        for c in sibs:
+            try:
+                check = True
+                tag = getattr(c,'tag').replace("/","")
+                if args and tag not in args:
+                        check = False
+                for (key, value) in kargs.items():
+                    if c[key] != value:
+                            check = False
+                if check:
+                    matches.append(c)
+                    if first_only: break
+            except:
+                pass
+        return matches
+
+    def sibling(self,*args,**kargs):
+        """
+        find the first sibling component that match the supplied argument list
+        and attribute dictionary, or None if nothing could be found
+        """
+        kargs['first_only'] = True
+        sibs = self.siblings(*args, **kargs)
+        if not sibs:
+            return None
+        return sibs[0]
+
+class CAT(DIV):
+    
+    tag = ''
+
+def TAG_unpickler(data):
+    return cPickle.loads(data)
+
+def TAG_pickler(data):
+    d = DIV()
+    d.__dict__ = data.__dict__
+    marshal_dump = cPickle.dumps(d)
+    return (TAG_unpickler, (marshal_dump,))
+
+class __TAG__(XmlComponent):
+
+    """
+    TAG factory example::
+
+        >>> print TAG.first(TAG.second('test'), _key = 3)
+        <first key=\"3\"><second>test</second></first>
+
+    """
+
+    def __getitem__(self, name):
+        return self.__getattr__(name)
+
+    def __getattr__(self, name):
+        if name[-1:] == '_':
+            name = name[:-1] + '/'
+        if isinstance(name,unicode):
+            name = name.encode('utf-8')
+        class __tag__(DIV):
+            tag = name
+        copy_reg.pickle(__tag__, TAG_pickler, TAG_unpickler)
+        return lambda *a, **b: __tag__(*a, **b)
+
+    def __call__(self,html):
+        return web2pyHTMLParser(decoder.decoder(html)).tree
+
+TAG = __TAG__()
+
+
+class HTML(DIV):
+    """
+    There are four predefined document type definitions.
+    They can be specified in the 'doctype' parameter:
+
+    -'strict' enables strict doctype
+    -'transitional' enables transitional doctype (default)
+    -'frameset' enables frameset doctype
+    -'html5' enables HTML 5 doctype
+    -any other string will be treated as user's own doctype
+
+    'lang' parameter specifies the language of the document.
+    Defaults to 'en'.
+
+    See also :class:`DIV`
+    """
+
+    tag = 'html'
+
+    strict = '<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">\n'
+    transitional = '<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">\n'
+    frameset = '<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Frameset//EN" "http://www.w3.org/TR/html4/frameset.dtd">\n'
+    html5 = '<!DOCTYPE HTML>\n'
+
+    def xml(self):
+        lang = self['lang']
+        if not lang:
+            lang = 'en'
+        self.attributes['_lang'] = lang
+        doctype = self['doctype']
+        if doctype:
+            if doctype == 'strict':
+                doctype = self.strict
+            elif doctype == 'transitional':
+                doctype = self.transitional
+            elif doctype == 'frameset':
+                doctype = self.frameset
+            elif doctype == 'html5':
+                doctype = self.html5
+            else:
+                doctype = '%s\n' % doctype
+        else:
+            doctype = self.transitional
+        (fa, co) = self._xml()
+        return '%s<%s%s>%s</%s>' % (doctype, self.tag, fa, co, self.tag)
+
+class XHTML(DIV):
+    """
+    This is XHTML version of the HTML helper.
+
+    There are three predefined document type definitions.
+    They can be specified in the 'doctype' parameter:
+
+    -'strict' enables strict doctype
+    -'transitional' enables transitional doctype (default)
+    -'frameset' enables frameset doctype
+    -any other string will be treated as user's own doctype
+
+    'lang' parameter specifies the language of the document and the xml document.
+    Defaults to 'en'.
+
+    'xmlns' parameter specifies the xml namespace.
+    Defaults to 'http://www.w3.org/1999/xhtml'.
+
+    See also :class:`DIV`
+    """
+
+    tag = 'html'
+
+    strict = '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">\n'
+    transitional = '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">\n'
+    frameset = '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Frameset//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-frameset.dtd">\n'
+    xmlns = 'http://www.w3.org/1999/xhtml'
+
+    def xml(self):
+        xmlns = self['xmlns']
+        if xmlns:
+            self.attributes['_xmlns'] = xmlns
+        else:
+            self.attributes['_xmlns'] = self.xmlns
+        lang = self['lang']
+        if not lang:
+            lang = 'en'
+        self.attributes['_lang'] = lang
+        self.attributes['_xml:lang'] = lang
+        doctype = self['doctype']
+        if doctype:
+            if doctype == 'strict':
+                doctype = self.strict
+            elif doctype == 'transitional':
+                doctype = self.transitional
+            elif doctype == 'frameset':
+                doctype = self.frameset
+            else:
+                doctype = '%s\n' % doctype
+        else:
+            doctype = self.transitional
+        (fa, co) = self._xml()
+        return '%s<%s%s>%s</%s>' % (doctype, self.tag, fa, co, self.tag)
+
+
+class HEAD(DIV):
+
+    tag = 'head'
+
+class TITLE(DIV):
+
+    tag = 'title'
+
+
+class META(DIV):
+
+    tag = 'meta/'
+
+
+class LINK(DIV):
+
+    tag = 'link/'
+
+
+class SCRIPT(DIV):
+
+    tag = 'script'
+
+    def xml(self):
+        (fa, co) = self._xml()
+        # no escaping of subcomponents
+        co = '\n'.join([str(component) for component in
+                       self.components])
+        if co:
+            # <script [attributes]><!--//--><![CDATA[//><!--
+            # script body
+            # //--><!]]></script>
+            # return '<%s%s><!--//--><![CDATA[//><!--\n%s\n//--><!]]></%s>' % (self.tag, fa, co, self.tag)
+            return '<%s%s><!--\n%s\n//--></%s>' % (self.tag, fa, co, self.tag)
+        else:
+            return DIV.xml(self)
+
+
+class STYLE(DIV):
+
+    tag = 'style'
+
+    def xml(self):
+        (fa, co) = self._xml()
+        # no escaping of subcomponents
+        co = '\n'.join([str(component) for component in
+                       self.components])
+        if co:
+            # <style [attributes]><!--/*--><![CDATA[/*><!--*/
+            # style body
+            # /*]]>*/--></style>
+            return '<%s%s><!--/*--><![CDATA[/*><!--*/\n%s\n/*]]>*/--></%s>' % (self.tag, fa, co, self.tag)
+        else:
+            return DIV.xml(self)
+
+
+class IMG(DIV):
+
+    tag = 'img/'
+
+
+class SPAN(DIV):
+
+    tag = 'span'
+
+
+class BODY(DIV):
+
+    tag = 'body'
+
+
+class H1(DIV):
+
+    tag = 'h1'
+
+
+class H2(DIV):
+
+    tag = 'h2'
+
+
+class H3(DIV):
+
+    tag = 'h3'
+
+
+class H4(DIV):
+
+    tag = 'h4'
+
+
+class H5(DIV):
+
+    tag = 'h5'
+
+
+class H6(DIV):
+
+    tag = 'h6'
+
+
+class P(DIV):
+    """
+    Will replace ``\\n`` by ``<br />`` if the `cr2br` attribute is provided.
+
+    see also :class:`DIV`
+    """
+
+    tag = 'p'
+
+    def xml(self):
+        text = DIV.xml(self)
+        if self['cr2br']:
+            text = text.replace('\n', '<br />')
+        return text
+
+
+class B(DIV):
+
+    tag = 'b'
+
+
+class BR(DIV):
+
+    tag = 'br/'
+
+
+class HR(DIV):
+
+    tag = 'hr/'
+
+
+class A(DIV):
+
+    tag = 'a'
+
+    def xml(self):
+        if self['callback']:
+            self['_onclick']="ajax('%s',[],'%s');return false;" % \
+                (self['callback'],self['target'] or '')
+            self['_href'] = self['_href'] or '#null'
+        elif self['cid']:
+            self['_onclick']='web2py_component("%s","%s");return false;' % \
+                (self['_href'],self['cid'])
+        return DIV.xml(self)
+
+
+class BUTTON(DIV):
+    
+    tag = 'button'
+
+
+class EM(DIV):
+
+    tag = 'em'
+
+
+class EMBED(DIV):
+
+    tag = 'embed/'
+
+
+class TT(DIV):
+
+    tag = 'tt'
+
+
+class PRE(DIV):
+
+    tag = 'pre'
+
+
+class CENTER(DIV):
+
+    tag = 'center'
+
+
+class CODE(DIV):
+
+    """
+    displays code in HTML with syntax highlighting.
+
+    :param attributes: optional attributes:
+
+        - language: indicates the language, otherwise PYTHON is assumed
+        - link: can provide a link
+        - styles: for styles
+
+    Example::
+
+        {{=CODE(\"print 'hello world'\", language='python', link=None,
+            counter=1, styles={}, highlight_line=None)}}
+
+
+    supported languages are \"python\", \"html_plain\", \"c\", \"cpp\",
+    \"web2py\", \"html\".
+    The \"html\" language interprets {{ and }} tags as \"web2py\" code,
+    \"html_plain\" doesn't.
+
+    if a link='/examples/global/vars/' is provided web2py keywords are linked to
+    the online docs.
+
+    the counter is used for line numbering, counter can be None or a prompt
+    string.
+    """
+
+    def xml(self):
+        language = self['language'] or 'PYTHON'
+        link = self['link']
+        counter = self.attributes.get('counter', 1)
+        highlight_line = self.attributes.get('highlight_line', None)
+        styles = self['styles'] or {}
+        return highlight(
+            join(self.components),
+            language=language,
+            link=link,
+            counter=counter,
+            styles=styles,
+            attributes=self.attributes,
+            highlight_line=highlight_line,
+            )
+
+
+class LABEL(DIV):
+
+    tag = 'label'
+
+
+class LI(DIV):
+
+    tag = 'li'
+
+
+class UL(DIV):
+    """
+    UL Component.
+
+    If subcomponents are not LI-components they will be wrapped in a LI
+
+    see also :class:`DIV`
+    """
+
+    tag = 'ul'
+
+    def _fixup(self):
+        self._wrap_components(LI, LI)
+
+
+class OL(UL):
+
+    tag = 'ol'
+
+
+class TD(DIV):
+
+    tag = 'td'
+
+
+class TH(DIV):
+
+    tag = 'th'
+
+
+class TR(DIV):
+    """
+    TR Component.
+
+    If subcomponents are not TD/TH-components they will be wrapped in a TD
+
+    see also :class:`DIV`
+    """
+
+    tag = 'tr'
+
+    def _fixup(self):
+        self._wrap_components((TD, TH), TD)
+
+class THEAD(DIV):
+
+    tag = 'thead'
+
+    def _fixup(self):
+        self._wrap_components(TR, TR)
+
+
+class TBODY(DIV):
+
+    tag = 'tbody'
+
+    def _fixup(self):
+        self._wrap_components(TR, TR)
+
+
+class TFOOT(DIV):
+
+    tag = 'tfoot'
+
+    def _fixup(self):
+        self._wrap_components(TR, TR)
+
+
+class COL(DIV):
+
+    tag = 'col'
+
+
+class COLGROUP(DIV):
+
+    tag = 'colgroup'
+
+
+class TABLE(DIV):
+    """
+    TABLE Component.
+
+    If subcomponents are not TR/TBODY/THEAD/TFOOT-components
+    they will be wrapped in a TR
+
+    see also :class:`DIV`
+    """
+
+    tag = 'table'
+
+    def _fixup(self):
+        self._wrap_components((TR, TBODY, THEAD, TFOOT, COL, COLGROUP), TR)
+
+class I(DIV):
+
+    tag = 'i'
+
+class IFRAME(DIV):
+
+    tag = 'iframe'
+
+
+class INPUT(DIV):
+
+    """
+        INPUT Component
+
+        examples::
+
+            >>> INPUT(_type='text', _name='name', value='Max').xml()
+            '<input name=\"name\" type=\"text\" value=\"Max\" />'
+
+            >>> INPUT(_type='checkbox', _name='checkbox', value='on').xml()
+            '<input checked=\"checked\" name=\"checkbox\" type=\"checkbox\" value=\"on\" />'
+
+            >>> INPUT(_type='radio', _name='radio', _value='yes', value='yes').xml()
+            '<input checked=\"checked\" name=\"radio\" type=\"radio\" value=\"yes\" />'
+
+            >>> INPUT(_type='radio', _name='radio', _value='no', value='yes').xml()
+            '<input name=\"radio\" type=\"radio\" value=\"no\" />'
+
+        the input helper takes two special attributes value= and requires=.
+
+        :param value: used to pass the initial value for the input field.
+            value differs from _value because it works for checkboxes, radio,
+            textarea and select/option too.
+
+            - for a checkbox value should be '' or 'on'.
+            - for a radio or select/option value should be the _value
+                of the checked/selected item.
+
+        :param requires: should be None, or a validator or a list of validators
+            for the value of the field.
+        """
+
+    tag = 'input/'
+
+    def _validate(self):
+
+        # # this only changes value, not _value
+
+        name = self['_name']
+        if name is None or name == '':
+            return True
+        name = str(name)
+
+        if self['_type'] != 'checkbox':
+            self['old_value'] = self['value'] or self['_value'] or ''
+            value = self.request_vars.get(name, '')
+            self['value'] = value
+        else:
+            self['old_value'] = self['value'] or False
+            value = self.request_vars.get(name)
+            if isinstance(value, (tuple, list)):
+                self['value'] = self['_value'] in value
+            else:
+                self['value'] = self['_value'] == value
+        requires = self['requires']
+        if requires:
+            if not isinstance(requires, (list, tuple)):
+                requires = [requires]
+            for validator in requires:
+                (value, errors) = validator(value)
+                if errors != None:
+                    self.vars[name] = value
+                    self.errors[name] = errors
+                    break
+        if not name in self.errors:
+            self.vars[name] = value
+            return True
+        return False
+
+    def _postprocessing(self):
+        t = self['_type']
+        if not t:
+            t = self['_type'] = 'text'
+        t = t.lower()
+        value = self['value']
+        if self['_value'] == None:
+            _value = None
+        else:
+            _value = str(self['_value'])
+        if t == 'checkbox':
+            if not _value:
+                _value = self['_value'] = 'on'
+            if not value:
+                value = []
+            elif value is True:
+                value = [_value]
+            elif not isinstance(value,(list,tuple)):
+                value = str(value).split('|')
+            self['_checked'] = _value in value and 'checked' or None
+        elif t == 'radio':
+            if str(value) == str(_value):
+                self['_checked'] = 'checked'
+            else:
+                self['_checked'] = None
+        elif t == 'text' or t == 'hidden':
+            if value != None:
+                self['_value'] = value
+            else:
+                self['value'] = _value
+
+    def xml(self):
+        name = self.attributes.get('_name', None)
+        if name and hasattr(self, 'errors') \
+                and self.errors.get(name, None) \
+                and self['hideerror'] != True:
+            return DIV.xml(self) + DIV(self.errors[name], _class='error',
+                errors=None, _id='%s__error' % name).xml()
+        else:
+            return DIV.xml(self)
+
+
+class TEXTAREA(INPUT):
+
+    """
+    example::
+
+        TEXTAREA(_name='sometext', value='blah '*100, requires=IS_NOT_EMPTY())
+
+    'blah blah blah ...' will be the content of the textarea field.
+    """
+
+    tag = 'textarea'
+
+    def _postprocessing(self):
+        if not '_rows' in self.attributes:
+            self['_rows'] = 10
+        if not '_cols' in self.attributes:
+            self['_cols'] = 40
+        if self['value'] != None:
+            self.components = [self['value']]
+        elif self.components:
+            self['value'] = self.components[0]
+
+
+class OPTION(DIV):
+
+    tag = 'option'
+
+    def _fixup(self):
+        if not '_value' in self.attributes:
+            self.attributes['_value'] = str(self.components[0])
+
+
+class OBJECT(DIV):
+
+    tag = 'object'
+
+class OPTGROUP(DIV):
+
+    tag = 'optgroup'
+
+    def _fixup(self):
+        components = []
+        for c in self.components:
+            if isinstance(c, OPTION):
+                components.append(c)
+            else:
+                components.append(OPTION(c, _value=str(c)))
+        self.components = components
+
+
+class SELECT(INPUT):
+
+    """
+    example::
+
+        >>> from validators import IS_IN_SET
+        >>> SELECT('yes', 'no', _name='selector', value='yes',
+        ...    requires=IS_IN_SET(['yes', 'no'])).xml()
+        '<select name=\"selector\"><option selected=\"selected\" value=\"yes\">yes</option><option value=\"no\">no</option></select>'
+
+    """
+
+    tag = 'select'
+
+    def _fixup(self):
+        components = []
+        for c in self.components:
+            if isinstance(c, (OPTION, OPTGROUP)):
+                components.append(c)
+            else:
+                components.append(OPTION(c, _value=str(c)))
+        self.components = components
+
+    def _postprocessing(self):
+        component_list = []
+        for c in self.components:
+            if isinstance(c, OPTGROUP):
+                component_list.append(c.components)
+            else:
+                component_list.append([c])
+        options = itertools.chain(*component_list)
+
+        value = self['value']
+        if value != None:
+            if not self['_multiple']:
+                for c in options: # my patch
+                    if value and str(c['_value'])==str(value):
+                        c['_selected'] = 'selected'
+                    else:
+                        c['_selected'] = None
+            else:
+                if isinstance(value,(list,tuple)):
+                    values = [str(item) for item in value]
+                else:
+                    values = [str(value)]
+                for c in options: # my patch
+                    if value and str(c['_value']) in values:
+                        c['_selected'] = 'selected'
+                    else:
+                        c['_selected'] = None
+
+
+class FIELDSET(DIV):
+
+    tag = 'fieldset'
+
+
+class LEGEND(DIV):
+
+    tag = 'legend'
+
+
+class FORM(DIV):
+
+    """
+    example::
+
+        >>> from validators import IS_NOT_EMPTY
+        >>> form=FORM(INPUT(_name=\"test\", requires=IS_NOT_EMPTY()))
+        >>> form.xml()
+        '<form action=\"\" enctype=\"multipart/form-data\" method=\"post\"><input name=\"test\" type=\"text\" /></form>'
+
+    a FORM is container for INPUT, TEXTAREA, SELECT and other helpers
+
+    form has one important method::
+
+        form.accepts(request.vars, session)
+
+    if form is accepted (and all validators pass) form.vars contains the
+    accepted vars, otherwise form.errors contains the errors.
+    in case of errors the form is modified to present the errors to the user.
+    """
+
+    tag = 'form'
+
+    def __init__(self, *components, **attributes):
+        DIV.__init__(self, *components,  **attributes)
+        self.vars = Storage()
+        self.errors = Storage()
+        self.latest = Storage()
+
+    def accepts(
+        self,
+        vars,
+        session=None,
+        formname='default',
+        keepvalues=False,
+        onvalidation=None,
+        hideerror=False,
+        ):
+        if vars.__class__.__name__ == 'Request':
+            vars=vars.post_vars
+        self.errors.clear()
+        self.request_vars = Storage()
+        self.request_vars.update(vars)
+        self.session = session
+        self.formname = formname
+        self.keepvalues = keepvalues
+
+        # if this tag is a form and we are in accepting mode (status=True)
+        # check formname and formkey
+
+        status = True
+        if self.session:
+            formkey = self.session.get('_formkey[%s]' % self.formname, None)
+            # check if user tampering with form and void CSRF
+            if formkey != self.request_vars._formkey:
+                status = False
+        if self.formname != self.request_vars._formname:
+            status = False
+        if status and self.session:
+            # check if editing a record that has been modified by the server
+            if hasattr(self,'record_hash') and self.record_hash != formkey:
+                status = False
+                self.record_changed = True
+        status = self._traverse(status,hideerror)
+        if onvalidation:
+            if isinstance(onvalidation, dict):
+                onsuccess = onvalidation.get('onsuccess', None)
+                onfailure = onvalidation.get('onfailure', None)
+                if onsuccess and status:
+                    onsuccess(self)
+                if onfailure and vars and not status:
+                    onfailure(self)
+                    status = len(self.errors) == 0
+            elif status:
+                if isinstance(onvalidation, (list, tuple)):
+                    [f(self) for f in onvalidation]
+                else:
+                    onvalidation(self)
+        if self.errors:
+            status = False
+        if session != None:
+            if hasattr(self,'record_hash'):
+                formkey = self.record_hash
+            else:
+                formkey = web2py_uuid()
+            self.formkey = session['_formkey[%s]' % formname] = formkey
+        if status and not keepvalues:
+            self._traverse(False,hideerror)
+        return status
+
+    def _postprocessing(self):
+        if not '_action' in self.attributes:
+            self['_action'] = ''
+        if not '_method' in self.attributes:
+            self['_method'] = 'post'
+        if not '_enctype' in self.attributes:
+            self['_enctype'] = 'multipart/form-data'
+
+    def hidden_fields(self):
+        c = []
+        if 'hidden' in self.attributes:
+            for (key, value) in self.attributes.get('hidden',{}).items():
+                c.append(INPUT(_type='hidden', _name=key, _value=value))
+
+        if hasattr(self, 'formkey') and self.formkey:
+            c.append(INPUT(_type='hidden', _name='_formkey',
+                     _value=self.formkey))
+        if hasattr(self, 'formname') and self.formname:
+            c.append(INPUT(_type='hidden', _name='_formname',
+                     _value=self.formname))
+        return DIV(c, _class="hidden")
+
+    def xml(self):
+        newform = FORM(*self.components, **self.attributes)
+        hidden_fields = self.hidden_fields()
+        if hidden_fields.components:
+            newform.append(hidden_fields)
+        return DIV.xml(newform)
+
+    def validate(self, 
+                 values=None,
+                 session=None, 
+                 formname='default',
+                 keepvalues=False,
+                 onvalidation=None,
+                 hideerror=False,
+                 onsuccess='flash',
+                 onfailure='flash',
+                 message_onsuccess=None, 
+                 message_onfailure=None, 
+                 ):
+        """
+        This function validates the form, 
+        you can use it instead of directly form.accepts.
+
+        Usage:
+        In controller
+
+        def action():
+            form=FORM(INPUT(_name=\"test\", requires=IS_NOT_EMPTY()))
+            form.validate() #you can pass some args here - see below
+            return dict(form=form)
+
+        This can receive a bunch of arguments        
+
+        onsuccess = 'flash' - will show message_onsuccess in response.flash
+                    None - will do nothing
+                    can be a function (lambda form: pass)
+        onfailure = 'flash' - will show message_onfailure in response.flash
+                    None - will do nothing
+                    can be a function (lambda form: pass)
+
+        values = values to test the validation - dictionary, response.vars, session or other - Default to (request.vars, session)
+        message_onsuccess
+        message_onfailure
+        """
+        from gluon import current
+        if not session: session = current.session
+        if not values: values = current.request.post_vars
+         
+        message_onsuccess = message_onsuccess or current.T("Success!")
+        message_onfailure = message_onfailure or \
+            current.T("Errors in form, please check it out.")
+
+        if self.accepts(values, session):
+            if onsuccess == 'flash':
+                current.response.flash = message_onsuccess
+            elif callable(onsuccess):
+                onsuccess(self)
+            return True
+        elif self.errors:
+            if onfailure == 'flash':
+                current.response.flash = message_onfailure
+            elif callable(onfailure):
+                onfailure(self)
+            return False
+
+    def process(self, values=None, session=None, **args):
+        """
+        Perform the .validate() method but returns the form
+
+        Usage in controllers:
+        # directly on return
+        def action():
+            #some code here
+            return dict(form=FORM(...).process(...))
+
+        You can use it with FORM, SQLFORM or FORM based plugins
+
+        Examples:
+        #response.flash messages
+        def action():
+            form = SQLFORM(db.table).process(message_onsuccess='Sucess!')
+            retutn dict(form=form)
+
+        # callback function
+        # callback receives True or False as first arg, and a list of args.
+        def my_callback(status, msg):
+           response.flash = "Success! "+msg if status else "Errors occured"
+
+        # after argument can be 'flash' to response.flash messages
+        # or a function name to use as callback or None to do nothing.
+        def action():
+            return dict(form=SQLFORM(db.table).process(onsuccess=my_callback)
+        """ 
+        self.validate(values=values, session=session, **args)
+        return self
+
+
+class BEAUTIFY(DIV):
+
+    """
+    example::
+
+        >>> BEAUTIFY(['a', 'b', {'hello': 'world'}]).xml()
+        '<div><table><tr><td><div>a</div></td></tr><tr><td><div>b</div></td></tr><tr><td><div><table><tr><td style="font-weight:bold;">hello</td><td valign="top">:</td><td><div>world</div></td></tr></table></div></td></tr></table></div>'
+
+    turns any list, dictionary, etc into decent looking html.
+    Two special attributes are
+    :sorted: a function that takes the dict and returned sorted keys
+    :keyfilter: a funciton that takes a key and returns its representation
+                or None if the key is to be skipped. By default key[:1]=='_' is skipped.
+    """
+
+    tag = 'div'
+
+    @staticmethod
+    def no_underscore(key):
+        if key[:1]=='_':
+            return None
+        return key
+
+    def __init__(self, component, **attributes):
+        self.components = [component]
+        self.attributes = attributes
+        sorter = attributes.get('sorted',sorted)
+        keyfilter = attributes.get('keyfilter',BEAUTIFY.no_underscore)
+        components = []
+        attributes = copy.copy(self.attributes)
+        level = attributes['level'] = attributes.get('level',6) - 1
+        if '_class' in attributes:
+            attributes['_class'] += 'i'
+        if level == 0:
+            return
+        for c in self.components:
+            if hasattr(c,'xml') and callable(c.xml):
+                components.append(c)
+                continue
+            elif hasattr(c,'keys') and callable(c.keys):
+                rows = []
+                try:
+                    keys = (sorter and sorter(c)) or c
+                    for key in keys:
+                        if isinstance(key,(str,unicode)) and keyfilter:
+                            filtered_key = keyfilter(key)
+                        else:
+                            filtered_key = str(key)
+                        if filtered_key is None:
+                            continue
+                        value = c[key]
+                        if type(value) == types.LambdaType:
+                            continue
+                        rows.append(TR(TD(filtered_key, _style='font-weight:bold;'),
+                                       TD(':',_valign='top'),
+                                       TD(BEAUTIFY(value, **attributes))))
+                    components.append(TABLE(*rows, **attributes))
+                    continue
+                except:
+                    pass
+            if isinstance(c, str):
+                components.append(str(c))
+            elif isinstance(c, unicode):
+                components.append(c.encode('utf8'))
+            elif isinstance(c, (list, tuple)):
+                items = [TR(TD(BEAUTIFY(item, **attributes)))
+                         for item in c]
+                components.append(TABLE(*items, **attributes))
+            elif isinstance(c, cgi.FieldStorage):
+                components.append('FieldStorage object')
+            else:
+                components.append(repr(c))
+        self.components = components
+
+
+class MENU(DIV):
+    """
+    Used to build menus
+
+    Optional arguments
+      _class: defaults to 'web2py-menu web2py-menu-vertical'
+      ul_class: defaults to 'web2py-menu-vertical'
+      li_class: defaults to 'web2py-menu-expand'
+
+    Example:
+        menu = MENU([['name', False, URL(...), [submenu]], ...])
+        {{=menu}}
+    """
+
+    tag = 'ul'
+
+    def __init__(self, data, **args):
+        self.data = data
+        self.attributes = args
+        if not '_class' in self.attributes:
+            self['_class'] = 'web2py-menu web2py-menu-vertical'
+        if not 'ul_class' in self.attributes:
+            self['ul_class'] = 'web2py-menu-vertical'
+        if not 'li_class' in self.attributes:
+            self['li_class'] = 'web2py-menu-expand'
+        if not 'li_active' in self.attributes:
+            self['li_active'] = 'web2py-menu-active'
+
+    def serialize(self, data, level=0):
+        if level == 0:
+            ul = UL(**self.attributes)
+        else:
+            ul = UL(_class=self['ul_class'])
+        for item in data:
+            (name, active, link) = item[:3]
+            if isinstance(link,DIV):
+                li = LI(link)
+            elif 'no_link_url' in self.attributes and self['no_link_url']==link:
+                li = LI(DIV(name))
+            elif link:
+                li = LI(A(name, _href=link))
+            else:
+                li = LI(A(name, _href='#',
+                          _onclick='javascript:void(0);return false;'))
+            if len(item) > 3 and item[3]:
+                li['_class'] = self['li_class']
+                li.append(self.serialize(item[3], level+1))
+            if active or ('active_url' in self.attributes and self['active_url']==link):
+                if li['_class']:
+                    li['_class'] = li['_class']+' '+self['li_active']
+                else:
+                    li['_class'] = self['li_active']
+            ul.append(li)
+        return ul
+
+    def xml(self):
+        return self.serialize(self.data, 0).xml()
+
+
+def embed64(
+    filename = None,
+    file = None,
+    data = None,
+    extension = 'image/gif',
+    ):
+    """
+    helper to encode the provided (binary) data into base64.
+
+    :param filename: if provided, opens and reads this file in 'rb' mode
+    :param file: if provided, reads this file
+    :param data: if provided, uses the provided data
+    """
+
+    if filename and os.path.exists(file):
+        fp = open(filename, 'rb')
+        data = fp.read()
+        fp.close()
+    data = base64.b64encode(data)
+    return 'data:%s;base64,%s' % (extension, data)
+
+
+def test():
+    """
+    Example:
+
+    >>> from validators import *
+    >>> print DIV(A('click me', _href=URL(a='a', c='b', f='c')), BR(), HR(), DIV(SPAN(\"World\"), _class='unknown')).xml()
+    <div><a href=\"/a/b/c\">click me</a><br /><hr /><div class=\"unknown\"><span>World</span></div></div>
+    >>> print DIV(UL(\"doc\",\"cat\",\"mouse\")).xml()
+    <div><ul><li>doc</li><li>cat</li><li>mouse</li></ul></div>
+    >>> print DIV(UL(\"doc\", LI(\"cat\", _class='feline'), 18)).xml()
+    <div><ul><li>doc</li><li class=\"feline\">cat</li><li>18</li></ul></div>
+    >>> print TABLE(['a', 'b', 'c'], TR('d', 'e', 'f'), TR(TD(1), TD(2), TD(3))).xml()
+    <table><tr><td>a</td><td>b</td><td>c</td></tr><tr><td>d</td><td>e</td><td>f</td></tr><tr><td>1</td><td>2</td><td>3</td></tr></table>
+    >>> form=FORM(INPUT(_type='text', _name='myvar', requires=IS_EXPR('int(value)<10')))
+    >>> print form.xml()
+    <form action=\"\" enctype=\"multipart/form-data\" method=\"post\"><input name=\"myvar\" type=\"text\" /></form>
+    >>> print form.accepts({'myvar':'34'}, formname=None)
+    False
+    >>> print form.xml()
+    <form action="" enctype="multipart/form-data" method="post"><input name="myvar" type="text" value="34" /><div class="error" id="myvar__error">invalid expression</div></form>
+    >>> print form.accepts({'myvar':'4'}, formname=None, keepvalues=True)
+    True
+    >>> print form.xml()
+    <form action=\"\" enctype=\"multipart/form-data\" method=\"post\"><input name=\"myvar\" type=\"text\" value=\"4\" /></form>
+    >>> form=FORM(SELECT('cat', 'dog', _name='myvar'))
+    >>> print form.accepts({'myvar':'dog'}, formname=None, keepvalues=True)
+    True
+    >>> print form.xml()
+    <form action=\"\" enctype=\"multipart/form-data\" method=\"post\"><select name=\"myvar\"><option value=\"cat\">cat</option><option selected=\"selected\" value=\"dog\">dog</option></select></form>
+    >>> form=FORM(INPUT(_type='text', _name='myvar', requires=IS_MATCH('^\w+$', 'only alphanumeric!')))
+    >>> print form.accepts({'myvar':'as df'}, formname=None)
+    False
+    >>> print form.xml()
+    <form action=\"\" enctype=\"multipart/form-data\" method=\"post\"><input name=\"myvar\" type=\"text\" value=\"as df\" /><div class=\"error\" id=\"myvar__error\">only alphanumeric!</div></form>
+    >>> session={}
+    >>> form=FORM(INPUT(value=\"Hello World\", _name=\"var\", requires=IS_MATCH('^\w+$')))
+    >>> if form.accepts({}, session,formname=None): print 'passed'
+    >>> if form.accepts({'var':'test ', '_formkey': session['_formkey[None]']}, session, formname=None): print 'passed'
+    """
+    pass
+
+
+class web2pyHTMLParser(HTMLParser):
+    """
+    obj = web2pyHTMLParser(text) parses and html/xml text into web2py helpers.
+    obj.tree contains the root of the tree, and tree can be manipulated
+
+    >>> str(web2pyHTMLParser('hello<div a="b" c=3>wor<ld<span>xxx</span>y<script/>yy</div>zzz').tree)
+    'hello<div a="b" c="3">wor<ld<span>xxx</span>y<script></script>yy</div>zzz'
+    >>> str(web2pyHTMLParser('<div>a<span>b</div>c').tree)
+    '<div>a<span>b</span></div>c'
+    >>> tree = web2pyHTMLParser('hello<div a="b">world</div>').tree
+    >>> tree.element(_a='b')['_c']=5
+    >>> str(tree)
+    'hello<div a="b" c="5">world</div>'
+    """
+    def __init__(self,text,closed=('input','link')):
+        HTMLParser.__init__(self)
+        self.tree = self.parent = TAG['']()
+        self.closed = closed
+        self.tags = [x for x in __all__ if isinstance(eval(x),DIV)]
+        self.last = None
+        self.feed(text)
+    def handle_starttag(self, tagname, attrs):
+        if tagname.upper() in self.tags:
+            tag=eval(tagname.upper())
+        else:
+            if tagname in self.closed: tagname+='/'
+            tag = TAG[tagname]()
+        for key,value in attrs: tag['_'+key]=value
+        tag.parent = self.parent
+        self.parent.append(tag)
+        if not tag.tag.endswith('/'):
+            self.parent=tag
+        else:
+            self.last = tag.tag[:-1]
+    def handle_data(self,data):
+        try:
+            self.parent.append(data.encode('utf8','xmlcharref'))
+        except:
+            self.parent.append(data.decode('latin1').encode('utf8','xmlcharref'))
+    def handle_charref(self,name):
+        if name[1].lower()=='x':
+            self.parent.append(unichr(int(name[2:], 16)).encode('utf8'))
+        else:
+            self.parent.append(unichr(int(name[1:], 10)).encode('utf8'))
+    def handle_entityref(self,name):
+        self.parent.append(unichr(name2codepoint[name]).encode('utf8'))
+    def handle_endtag(self, tagname):
+        # this deals with unbalanced tags
+        if tagname==self.last:
+            return
+        while True:
+            try:
+                parent_tagname=self.parent.tag
+                self.parent = self.parent.parent
+            except:
+                raise RuntimeError, "unable to balance tag %s" % tagname
+            if parent_tagname[:len(tagname)]==tagname: break
+
+def markdown_serializer(text,tag=None,attr={}):
+    if tag is None: return re.sub('\s+',' ',text)
+    if tag=='br': return '\n\n'
+    if tag=='h1': return '#'+text+'\n\n'
+    if tag=='h2': return '#'*2+text+'\n\n'
+    if tag=='h3': return '#'*3+text+'\n\n'
+    if tag=='h4': return '#'*4+text+'\n\n'
+    if tag=='p': return text+'\n\n'
+    if tag=='b' or tag=='strong': return '**%s**' % text
+    if tag=='em' or tag=='i': return '*%s*' % text
+    if tag=='tt' or tag=='code': return '`%s`' % text
+    if tag=='a': return '[%s](%s)' % (text,attr.get('_href',''))
+    if tag=='img': return '![%s](%s)' % (attr.get('_alt',''),attr.get('_src',''))
+    return text
+
+def markmin_serializer(text,tag=None,attr={}):
+    # if tag is None: return re.sub('\s+',' ',text)
+    if tag=='br': return '\n\n'
+    if tag=='h1': return '# '+text+'\n\n'
+    if tag=='h2': return '#'*2+' '+text+'\n\n'
+    if tag=='h3': return '#'*3+' '+text+'\n\n'
+    if tag=='h4': return '#'*4+' '+text+'\n\n'
+    if tag=='p': return text+'\n\n'
+    if tag=='li': return '\n- '+text.replace('\n',' ')
+    if tag=='tr': return text[3:].replace('\n',' ')+'\n'
+    if tag in ['table','blockquote']: return '\n-----\n'+text+'\n------\n'
+    if tag in ['td','th']: return ' | '+text
+    if tag in ['b','strong','label']: return '**%s**' % text
+    if tag in ['em','i']: return "''%s''" % text
+    if tag in ['tt']: return '``%s``' % text.strip()
+    if tag in ['code']: return '``\n%s``' % text
+    if tag=='a': return '[[%s %s]]' % (text,attr.get('_href',''))
+    if tag=='img': return '[[%s %s left]]' % (attr.get('_alt','no title'),attr.get('_src',''))
+    return text
+
+
+class MARKMIN(XmlComponent):
+    """
+    For documentation: http://web2py.com/examples/static/markmin.html
+    """
+    def __init__(self, text, extra={}, allowed={}, sep='p'):
+        self.text = text
+        self.extra = extra
+        self.allowed = allowed
+        self.sep = sep
+
+    def xml(self):
+        """
+        calls the gluon.contrib.markmin render function to convert the wiki syntax
+        """
+        return render(self.text,extra=self.extra,allowed=self.allowed,sep=self.sep)
+
+    def __str__(self):
+        return self.xml()
+
+    def flatten(self,render=None):
+        """
+        return the text stored by the MARKMIN object rendered by the render function
+        """
+        return self.text
+
+    def elements(self, *args, **kargs):
+        """
+        to be considered experimental since the behavior of this method is questionable
+        another options could be TAG(self.text).elements(*args,**kargs)
+        """
+        return [self.text]
+
+
+if __name__ == '__main__':
+    import doctest
+    doctest.testmod()
+

ADDED   gluon/http.py
Index: gluon/http.py
==================================================================
--- /dev/null
+++ gluon/http.py
@@ -0,0 +1,127 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+"""
+
+__all__ = ['HTTP', 'redirect']
+
+defined_status = {
+    200: 'OK',
+    201: 'CREATED',
+    202: 'ACCEPTED',
+    203: 'NON-AUTHORITATIVE INFORMATION',
+    204: 'NO CONTENT',
+    205: 'RESET CONTENT',
+    206: 'PARTIAL CONTENT',
+    301: 'MOVED PERMANENTLY',
+    302: 'FOUND',
+    303: 'SEE OTHER',
+    304: 'NOT MODIFIED',
+    305: 'USE PROXY',
+    307: 'TEMPORARY REDIRECT',
+    400: 'BAD REQUEST',
+    401: 'UNAUTHORIZED',
+    403: 'FORBIDDEN',
+    404: 'NOT FOUND',
+    405: 'METHOD NOT ALLOWED',
+    406: 'NOT ACCEPTABLE',
+    407: 'PROXY AUTHENTICATION REQUIRED',
+    408: 'REQUEST TIMEOUT',
+    409: 'CONFLICT',
+    410: 'GONE',
+    411: 'LENGTH REQUIRED',
+    412: 'PRECONDITION FAILED',
+    413: 'REQUEST ENTITY TOO LARGE',
+    414: 'REQUEST-URI TOO LONG',
+    415: 'UNSUPPORTED MEDIA TYPE',
+    416: 'REQUESTED RANGE NOT SATISFIABLE',
+    417: 'EXPECTATION FAILED',
+    500: 'INTERNAL SERVER ERROR',
+    501: 'NOT IMPLEMENTED',
+    502: 'BAD GATEWAY',
+    503: 'SERVICE UNAVAILABLE',
+    504: 'GATEWAY TIMEOUT',
+    505: 'HTTP VERSION NOT SUPPORTED',
+    }
+
+# If web2py is executed with python2.4 we need
+# to use Exception instead of BaseException
+
+try:
+    BaseException
+except NameError:
+    BaseException = Exception
+
+
+class HTTP(BaseException):
+
+    def __init__(
+        self,
+        status,
+        body='',
+        **headers
+        ):
+        self.status = status
+        self.body = body
+        self.headers = headers
+
+    def to(self, responder):
+        if self.status in defined_status:
+            status = '%d %s' % (self.status, defined_status[self.status])
+        else:
+            status = str(self.status) + ' '
+        if not 'Content-Type' in self.headers:
+            self.headers['Content-Type'] = 'text/html; charset=UTF-8'
+        body = self.body
+        if status[:1] == '4':
+            if not body:
+                body = status
+            if isinstance(body, str):
+                if len(body)<512 and self.headers['Content-Type'].startswith('text/html'):
+                    body += '<!-- %s //-->' % ('x'*512) ### trick IE
+                self.headers['Content-Length'] = len(body)
+        headers = []
+        for (k, v) in self.headers.items():
+            if isinstance(v, list):
+                for item in v:
+                    headers.append((k, str(item)))
+            else:
+                headers.append((k, str(v)))
+        responder(status, headers)
+        if hasattr(body, '__iter__') and not isinstance(self.body, str):
+            return body
+        return [str(body)]
+
+    @property
+    def message(self):
+        '''
+        compose a message describing this exception
+
+        "status defined_status [web2py_error]"
+
+        message elements that are not defined are omitted
+        '''
+        msg = '%(status)d'
+        if self.status in defined_status:
+            msg = '%(status)d %(defined_status)s'
+        if 'web2py_error' in self.headers:
+            msg += ' [%(web2py_error)s]'
+        return msg % dict(status=self.status,
+                          defined_status=defined_status.get(self.status),
+                          web2py_error=self.headers.get('web2py_error'))
+
+    def __str__(self):
+        "stringify me"
+        return self.message
+
+
+def redirect(location, how=303):
+    location = location.replace('\r', '%0D').replace('\n', '%0A')
+    raise HTTP(how,
+               'You are being redirected <a href="%s">here</a>' % location,
+               Location=location)
+

ADDED   gluon/import_all.py
Index: gluon/import_all.py
==================================================================
--- /dev/null
+++ gluon/import_all.py
@@ -0,0 +1,110 @@
+#!/usr/bin/env python
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+This file is not strictly required by web2py. It is used for three purposes:
+
+1) check that all required modules are installed properly
+2) provide py2exe and py2app a list of modules to be packaged in the binary
+3) (optional) preload modules in memory to speed up http responses
+
+"""
+
+import os
+import sys
+
+base_modules = ['aifc', 'anydbm', 'array', 'asynchat', 'asyncore', 'atexit',
+                'audioop', 'base64', 'BaseHTTPServer', 'Bastion', 'binascii',
+                'binhex', 'bisect', 'bz2', 'calendar', 'cgi', 'CGIHTTPServer',
+                'cgitb', 'chunk', 'cmath', 'cmd', 'code', 'codecs', 'codeop',
+                'collections', 'colorsys', 'compileall', 'compiler',
+                'compiler.ast', 'compiler.visitor', 'ConfigParser',
+                'contextlib', 'Cookie', 'cookielib', 'copy', 'copy_reg',
+                'cPickle', 'cProfile', 'cStringIO', 'csv', 'ctypes',
+                'datetime', 'decimal', 'difflib', 'dircache', 'dis',
+                'doctest', 'DocXMLRPCServer', 'dumbdbm', 'dummy_thread',
+                'dummy_threading', 'email', 'email.charset', 'email.encoders',
+                'email.errors', 'email.generator', 'email.header',
+                'email.iterators', 'email.message', 'email.mime',
+                'email.mime.audio', 'email.mime.base', 'email.mime.image',
+                'email.mime.message', 'email.mime.multipart',
+                'email.mime.nonmultipart', 'email.mime.text', 'email.parser',
+                'email.utils', 'encodings.idna', 'errno', 'exceptions',
+                'filecmp', 'fileinput', 'fnmatch', 'formatter', 'fpformat',
+                'ftplib', 'functools', 'gc', 'getopt', 'getpass', 'gettext',
+                'glob', 'gzip', 'hashlib', 'heapq', 'hmac', 'hotshot',
+                'hotshot.stats', 'htmlentitydefs', 'htmllib', 'HTMLParser',
+                'httplib', 'imaplib', 'imghdr', 'imp', 'inspect',
+                'itertools', 'keyword', 'linecache', 'locale', 'logging',
+                'macpath', 'mailbox', 'mailcap', 'marshal', 'math',
+                'mimetools', 'mimetypes', 'mmap', 'modulefinder', 'mutex',
+                'netrc', 'new', 'nntplib', 'operator', 'optparse', 'os',
+                'parser', 'pdb', 'pickle', 'pickletools', 'pkgutil',
+                'platform', 'poplib', 'pprint', 'py_compile', 'pyclbr',
+                'pydoc', 'Queue', 'quopri', 'random', 're', 'repr',
+                'rexec', 'rfc822', 'rlcompleter', 'robotparser', 'runpy',
+                'sched', 'select', 'sgmllib', 'shelve',
+                'shlex', 'shutil', 'signal', 'SimpleHTTPServer',
+                'SimpleXMLRPCServer', 'site', 'smtpd', 'smtplib',
+                'sndhdr', 'socket', 'SocketServer', 'sqlite3',
+                'stat', 'statvfs', 'string', 'StringIO',
+                'stringprep', 'struct', 'subprocess', 'sunau', 'symbol',
+                'tabnanny', 'tarfile', 'telnetlib', 'tempfile', 'textwrap', 'thread', 'threading',
+                'time', 'timeit', 'Tix', 'Tkinter', 'token',
+                'tokenize', 'trace', 'traceback', 'types',
+                'unicodedata', 'unittest', 'urllib', 'urllib2',
+                'urlparse', 'user', 'UserDict', 'UserList', 'UserString',
+                'uu', 'uuid', 'warnings', 'wave', 'weakref', 'webbrowser',
+                'whichdb', 'wsgiref', 'wsgiref.handlers', 'wsgiref.headers',
+                'wsgiref.simple_server', 'wsgiref.util', 'wsgiref.validate',
+                'xdrlib', 'xml.dom', 'xml.dom.minidom', 'xml.dom.pulldom',
+                'xml.etree.ElementTree', 'xml.parsers.expat', 'xml.sax',
+                'xml.sax.handler', 'xml.sax.saxutils', 'xml.sax.xmlreader',
+                'xmlrpclib', 'zipfile', 'zipimport', 'zlib', 'mhlib',
+                'MimeWriter', 'mimify', 'multifile', 'sets']
+
+contributed_modules = []
+for root, dirs, files in os.walk('gluon'):
+    for candidate in ['.'.join(
+      os.path.join(root, os.path.splitext(name)[0]).split(os.sep))
+      for name in files if name.endswith('.py')
+        and root.split(os.sep) != ['gluon', 'tests']
+      ]:
+        contributed_modules.append(candidate)
+
+# Python base version
+python_version = sys.version[:3]
+
+# Modules which we want to raise an Exception if they are missing
+alert_dependency = ['hashlib', 'uuid']
+
+# Now we remove the blacklisted modules if we are using the stated
+# python version.
+#
+# List of modules deprecated in Python 2.6 or 2.7 that are in the above set
+py26_deprecated = ['mhlib', 'multifile', 'mimify', 'sets', 'MimeWriter']
+py27_deprecated = [] # ['optparse'] but we need it for now
+
+if python_version >= '2.6':
+    base_modules += ['json', 'multiprocessing']
+    base_modules = list(set(base_modules).difference(set(py26_deprecated)))
+
+if python_version >= '2.7':
+    base_modules += ['argparse']
+    base_modules = list(set(base_modules).difference(set(py27_deprecated)))
+
+# Now iterate in the base_modules, trying to do the import
+for module in base_modules + contributed_modules:
+    try:
+         __import__(module, globals(), locals(), [])
+    except:
+        # Raise an exception if the current module is a dependency
+        if module in alert_dependency:
+            msg = "Missing dependency: %(module)s\n" % locals()
+            msg += "Try the following command: "
+            msg += "easy_install-%(python_version)s -U %(module)s" % locals()
+            raise ImportError, msg
+

ADDED   gluon/languages.py
Index: gluon/languages.py
==================================================================
--- /dev/null
+++ gluon/languages.py
@@ -0,0 +1,348 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+"""
+
+import os
+import re
+import cgi
+import portalocker
+import logging
+import marshal
+import copy_reg
+from fileutils import listdir
+import settings
+from cfs import getcfs
+
+__all__ = ['translator', 'findT', 'update_all_languages']
+
+is_gae = settings.global_settings.web2py_runtime_gae
+
+# pattern to find T(blah blah blah) expressions
+
+PY_STRING_LITERAL_RE = r'(?<=[^\w]T\()(?P<name>'\
+     + r"[uU]?[rR]?(?:'''(?:[^']|'{1,2}(?!'))*''')|"\
+     + r"(?:'(?:[^'\\]|\\.)*')|" + r'(?:"""(?:[^"]|"{1,2}(?!"))*""")|'\
+     + r'(?:"(?:[^"\\]|\\.)*"))'
+
+regex_translate = re.compile(PY_STRING_LITERAL_RE, re.DOTALL)
+
+# patter for a valid accept_language
+
+regex_language = \
+    re.compile('^[a-zA-Z]{2}(\-[a-zA-Z]{2})?(\-[a-zA-Z]+)?$')
+
+
+def read_dict_aux(filename):
+    fp = open(filename, 'r')
+    portalocker.lock(fp, portalocker.LOCK_SH)
+    lang_text = fp.read().replace('\r\n', '\n')
+    portalocker.unlock(fp)
+    fp.close()
+    if not lang_text.strip():
+        return {}
+    try:
+        return eval(lang_text)
+    except:
+        logging.error('Syntax error in %s' % filename)
+        return {}
+
+def read_dict(filename):
+    return getcfs('language:%s'%filename,filename,
+                  lambda filename=filename:read_dict_aux(filename))
+
+def utf8_repr(s):
+    r''' # note that we use raw strings to avoid having to use double back slashes below
+
+    utf8_repr() works same as repr() when processing ascii string
+    >>> utf8_repr('abc') == utf8_repr("abc") == repr('abc') == repr("abc") == "'abc'"
+    True
+    >>> utf8_repr('a"b"c') == repr('a"b"c') == '\'a"b"c\''
+    True
+    >>> utf8_repr("a'b'c") == repr("a'b'c") == '"a\'b\'c"'
+    True
+    >>> utf8_repr('a\'b"c') == repr('a\'b"c') == utf8_repr("a'b\"c") == repr("a'b\"c") == '\'a\\\'b"c\''
+    True
+    >>> utf8_repr('a\r\nb') == repr('a\r\nb') == "'a\\r\\nb'" # Test for \r, \n
+    True
+
+    Unlike repr(), utf8_repr() remains utf8 content when processing utf8 string
+    >>> utf8_repr('中文字') == utf8_repr("中文字") == "'中文字'" != repr('中文字')
+    True
+    >>> utf8_repr('中"文"字') == "'中\"文\"字'" != repr('中"文"字')
+    True
+    >>> utf8_repr("中'文'字") == '"中\'文\'字"' != repr("中'文'字")
+    True
+    >>> utf8_repr('中\'文"字') == utf8_repr("中'文\"字") == '\'中\\\'文"字\'' != repr('中\'文"字') == repr("中'文\"字")
+    True
+    >>> utf8_repr('中\r\n文') == "'中\\r\\n文'" != repr('中\r\n文') # Test for \r, \n
+    True
+    '''
+    if (s.find("'") >= 0) and (s.find('"') < 0): # only single quote exists
+        s = ''.join(['"', s, '"']) # s = ''.join(['"', s.replace('"','\\"'), '"'])
+    else:
+        s = ''.join(["'", s.replace("'","\\'"), "'"])
+    return s.replace("\n","\\n").replace("\r","\\r")
+
+
+def write_dict(filename, contents):
+    try:
+        fp = open(filename, 'w')
+    except IOError:
+        logging.error('Unable to write to file %s' % filename)
+        return
+    portalocker.lock(fp, portalocker.LOCK_EX)
+    fp.write('# coding: utf8\n{\n')
+    for key in sorted(contents):
+        fp.write('%s: %s,\n' % (utf8_repr(key), utf8_repr(contents[key])))
+    fp.write('}\n')
+    portalocker.unlock(fp)
+    fp.close()
+
+
+class lazyT(object):
+
+    """
+    never to be called explicitly, returned by translator.__call__
+    """
+
+    m = None
+    s = None
+    T = None
+
+    def __init__(
+        self,
+        message,
+        symbols = {},
+        T = None,
+        ):
+        self.m = message
+        self.s = symbols
+        self.T = T
+
+    def __repr__(self):
+        return "<lazyT %s>" % (repr(str(self.m)), )
+
+    def __str__(self):
+        return self.T.translate(self.m, self.s)
+
+    def __eq__(self, other):
+        return self.T.translate(self.m, self.s) == other
+
+    def __ne__(self, other):
+        return self.T.translate(self.m, self.s) != other
+
+    def __add__(self, other):
+        return '%s%s' % (self, other)
+
+    def __radd__(self, other):
+        return '%s%s' % (other, self)
+
+    def __cmp__(self,other):
+        return cmp(str(self),str(other))
+
+    def __hash__(self):
+        return hash(str(self))
+
+    def __getattr__(self, name):
+        return getattr(str(self),name)
+
+    def __getitem__(self, i):
+        return str(self)[i]
+
+    def __getslice__(self, i, j):
+        return str(self)[i:j]
+
+    def __iter__(self):
+        for c in str(self): yield c
+
+    def __len__(self):
+        return len(str(self))
+
+    def xml(self):
+        return cgi.escape(str(self))
+
+    def encode(self, *a, **b):
+        return str(self).encode(*a, **b)
+
+    def decode(self, *a, **b):
+        return str(self).decode(*a, **b)
+
+    def read(self):
+        return str(self)
+
+    def __mod__(self, symbols):
+        return self.T.translate(self.m, symbols)
+
+
+class translator(object):
+
+    """
+    this class is instantiated by gluon.compileapp.build_environment
+    as the T object
+
+    ::
+
+        T.force(None) # turns off translation
+        T.force('fr, it') # forces web2py to translate using fr.py or it.py
+
+        T(\"Hello World\") # translates \"Hello World\" using the selected file
+
+    notice 1: there is no need to force since, by default, T uses
+    accept_language to determine a translation file.
+
+    notice 2: en and en-en are considered different languages!
+    """
+
+    def __init__(self, request):
+        self.request = request
+        self.folder = request.folder
+        self.current_languages = ['en']
+        self.accepted_language = None
+        self.language_file = None
+        self.http_accept_language = request.env.http_accept_language
+        self.requested_languages = self.force(self.http_accept_language)
+        self.lazy = True
+        self.otherTs = {}
+
+    def get_possible_languages(self):
+        possible_languages = self.current_languages
+        file_ending = re.compile("\.py$")
+        for langfile in os.listdir(os.path.join(self.folder,'languages')):
+            if file_ending.search(langfile):
+                possible_languages.append(file_ending.sub('',langfile))
+        return possible_languages
+
+    def set_current_languages(self, *languages):
+        if len(languages) == 1 and isinstance(languages[0], (tuple, list)):
+            languages = languages[0]
+        self.current_languages = languages
+        self.force(self.http_accept_language)
+
+    def force(self, *languages):
+        if not languages or languages[0] == None:
+            languages = []
+        if len(languages) == 1 and isinstance(languages[0], (str, unicode)):
+            languages = languages[0]
+        if languages:
+            if isinstance(languages, (str, unicode)):
+                accept_languages = languages.split(';')
+                languages = []
+                [languages.extend(al.split(',')) for al in accept_languages]
+                languages = [item.strip().lower() for item in languages \
+                                 if regex_language.match(item.strip())]
+
+            for language in languages:
+                if language in self.current_languages:
+                    self.accepted_language = language
+                    break
+                filename = os.path.join(self.folder, 'languages/', language + '.py')
+                if os.path.exists(filename):
+                    self.accepted_language = language
+                    self.language_file = filename
+                    self.t = read_dict(filename)
+                    return languages
+        self.language_file = None
+        self.t = {}  # ## no language by default
+        return languages
+
+    def __call__(self, message, symbols={},language=None):
+        if not language:
+            if self.lazy:
+                return lazyT(message, symbols, self)
+            else:
+                return self.translate(message, symbols)
+        else:
+            try:
+                otherT = self.otherTs[language]
+            except KeyError:
+                otherT = self.otherTs[language] = translator(self.request)
+                otherT.force(language)
+            return otherT(message,symbols)
+
+    def translate(self, message, symbols):
+        """
+        user ## to add a comment into a translation string
+        the comment can be useful do discriminate different possible
+        translations for the same string (for example different locations)
+
+        T(' hello world ') -> ' hello world '
+        T(' hello world ## token') -> 'hello world'
+        T('hello ## world ## token') -> 'hello ## world'
+
+        the ## notation is ignored in multiline strings and strings that
+        start with ##. this is to allow markmin syntax to be translated
+        """
+        if not message.startswith('#') and not '\n' in message:
+            tokens = message.rsplit('##', 1)
+        else:
+            # this allows markmin syntax in translations
+            tokens = [message]
+        if len(tokens) == 2:
+            tokens[0] = tokens[0].strip()
+            message = tokens[0] + '##' + tokens[1].strip()
+        mt = self.t.get(message, None)
+        if mt == None:
+            self.t[message] = mt = tokens[0]
+            if self.language_file and not is_gae:
+                write_dict(self.language_file, self.t)
+        if symbols or symbols == 0:
+            return mt % symbols
+        return mt
+
+
+def findT(path, language='en-us'):
+    """
+    must be run by the admin app
+    """
+    filename = os.path.join(path, 'languages', '%s.py' % language)
+    sentences = read_dict(filename)
+    mp = os.path.join(path, 'models')
+    cp = os.path.join(path, 'controllers')
+    vp = os.path.join(path, 'views')
+    for file in listdir(mp, '.+\.py', 0) + listdir(cp, '.+\.py', 0)\
+         + listdir(vp, '.+\.html', 0):
+        fp = open(file, 'r')
+        portalocker.lock(fp, portalocker.LOCK_SH)
+        data = fp.read()
+        portalocker.unlock(fp)
+        fp.close()
+        items = regex_translate.findall(data)
+        for item in items:
+            try:
+                message = eval(item)
+                if not message.startswith('#') and not '\n' in message:
+                    tokens = message.rsplit('##', 1)
+                else:
+                    # this allows markmin syntax in translations
+                    tokens = [message]
+                if len(tokens) == 2:
+                    message = tokens[0].strip() + '##' + tokens[1].strip()
+                if message and not message in sentences:
+                    sentences[message] = message
+            except:
+                pass
+    write_dict(filename, sentences)
+
+### important to allow safe session.flash=T(....)
+def lazyT_unpickle(data):
+    return marshal.loads(data)
+def lazyT_pickle(data):
+    return lazyT_unpickle, (marshal.dumps(str(data)),)
+copy_reg.pickle(lazyT, lazyT_pickle, lazyT_unpickle)
+
+def update_all_languages(application_path):
+    path = os.path.join(application_path, 'languages/')
+    for language in listdir(path, '^\w+(\-\w+)?\.py$'):
+        findT(application_path, language[:-3])
+
+
+if __name__ == '__main__':
+    import doctest
+    doctest.testmod()
+
+

ADDED   gluon/main.py
Index: gluon/main.py
==================================================================
--- /dev/null
+++ gluon/main.py
@@ -0,0 +1,810 @@
+#!/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+Contains:
+
+- wsgibase: the gluon wsgi application
+
+"""
+
+import gc
+import cgi
+import cStringIO
+import Cookie
+import os
+import re
+import copy
+import sys
+import time
+import thread
+import datetime
+import signal
+import socket
+import tempfile
+import random
+import string
+import platform
+from fileutils import abspath, write_file
+from settings import global_settings
+from admin import add_path_first, create_missing_folders, create_missing_app_folders
+from globals import current
+
+from custom_import import custom_import_install
+from contrib.simplejson import dumps
+
+#  Remarks:
+#  calling script has inserted path to script directory into sys.path
+#  applications_parent (path to applications/, site-packages/ etc)
+#  defaults to that directory set sys.path to
+#  ("", gluon_parent/site-packages, gluon_parent, ...)
+#
+#  this is wrong:
+#  web2py_path = os.path.dirname(os.path.dirname(os.path.abspath(__file__)))
+#  because we do not want the path to this file which may be Library.zip
+#  gluon_parent is the directory containing gluon, web2py.py, logging.conf
+#  and the handlers.
+#  applications_parent (web2py_path) is the directory containing applications/
+#  and routes.py
+#  The two are identical unless web2py_path is changed via the web2py.py -f folder option
+#  main.web2py_path is the same as applications_parent (for backward compatibility)
+
+if not hasattr(os, 'mkdir'):
+    global_settings.db_sessions = True
+if global_settings.db_sessions is not True:
+    global_settings.db_sessions = set()
+global_settings.gluon_parent = os.environ.get('web2py_path', os.getcwd())
+global_settings.applications_parent = global_settings.gluon_parent
+web2py_path = global_settings.applications_parent # backward compatibility
+global_settings.app_folders = set()
+global_settings.debugging = False
+
+custom_import_install(web2py_path)
+
+create_missing_folders()
+
+# set up logging for subsequent imports
+import logging
+import logging.config
+logpath = abspath("logging.conf")
+if os.path.exists(logpath):
+    logging.config.fileConfig(abspath("logging.conf"))
+else:
+    logging.basicConfig()
+logger = logging.getLogger("web2py")
+
+from restricted import RestrictedError
+from http import HTTP, redirect
+from globals import Request, Response, Session
+from compileapp import build_environment, run_models_in, \
+    run_controller_in, run_view_in
+from fileutils import copystream
+from contenttype import contenttype
+from dal import BaseAdapter
+from settings import global_settings
+from validators import CRYPT
+from cache import Cache
+from html import URL as Url
+import newcron
+import rewrite
+
+__all__ = ['wsgibase', 'save_password', 'appfactory', 'HttpServer']
+
+requests = 0    # gc timer
+
+# Security Checks: validate URL and session_id here,
+# accept_language is validated in languages
+
+# pattern used to validate client address
+regex_client = re.compile('[\w\-:]+(\.[\w\-]+)*\.?')  # ## to account for IPV6
+
+version_info = open(abspath('VERSION', gluon=True), 'r')
+web2py_version = version_info.read()
+version_info.close()
+
+try:
+    import rocket
+except:
+    if not global_settings.web2py_runtime_gae:
+        logger.warn('unable to import Rocket')
+
+rewrite.load()
+
+def get_client(env):
+    """
+    guess the client address from the environment variables
+
+    first tries 'http_x_forwarded_for', secondly 'remote_addr'
+    if all fails assume '127.0.0.1' (running locally)
+    """
+    g = regex_client.search(env.get('http_x_forwarded_for', ''))
+    if g:
+        return g.group()
+    g = regex_client.search(env.get('remote_addr', ''))
+    if g:
+        return g.group()
+    return '127.0.0.1'
+
+def copystream_progress(request, chunk_size= 10**5):
+    """
+    copies request.env.wsgi_input into request.body
+    and stores progress upload status in cache.ram
+    X-Progress-ID:length and X-Progress-ID:uploaded
+    """
+    if not request.env.content_length:
+        return cStringIO.StringIO()
+    source = request.env.wsgi_input
+    size = int(request.env.content_length)
+    dest = tempfile.TemporaryFile()
+    if not 'X-Progress-ID' in request.vars:
+        copystream(source, dest, size, chunk_size)
+        return dest
+    cache_key = 'X-Progress-ID:'+request.vars['X-Progress-ID']
+    cache = Cache(request)
+    cache.ram(cache_key+':length', lambda: size, 0)
+    cache.ram(cache_key+':uploaded', lambda: 0, 0)
+    while size > 0:
+        if size < chunk_size:
+            data = source.read(size)
+            cache.ram.increment(cache_key+':uploaded', size)
+        else:
+            data = source.read(chunk_size)
+            cache.ram.increment(cache_key+':uploaded', chunk_size)
+        length = len(data)
+        if length > size:
+            (data, length) = (data[:size], size)
+        size -= length
+        if length == 0:
+            break
+        dest.write(data)
+        if length < chunk_size:
+            break
+    dest.seek(0)
+    cache.ram(cache_key+':length', None)
+    cache.ram(cache_key+':uploaded', None)
+    return dest
+
+
+def serve_controller(request, response, session):
+    """
+    this function is used to generate a dynamic page.
+    It first runs all models, then runs the function in the controller,
+    and then tries to render the output using a view/template.
+    this function must run from the [application] folder.
+    A typical example would be the call to the url
+    /[application]/[controller]/[function] that would result in a call
+    to [function]() in applications/[application]/[controller].py
+    rendered by applications/[application]/views/[controller]/[function].html
+    """
+
+    # ##################################################
+    # build environment for controller and view
+    # ##################################################
+
+    environment = build_environment(request, response, session)
+
+    # set default view, controller can override it
+
+    response.view = '%s/%s.%s' % (request.controller,
+                                  request.function,
+                                  request.extension)
+
+    # also, make sure the flash is passed through
+    # ##################################################
+    # process models, controller and view (if required)
+    # ##################################################
+
+    run_models_in(environment)
+    response._view_environment = copy.copy(environment)
+    page = run_controller_in(request.controller, request.function, environment)
+    if isinstance(page, dict):
+        response._vars = page
+        for key in page:
+            response._view_environment[key] = page[key]
+        run_view_in(response._view_environment)
+        page = response.body.getvalue()
+    # logic to garbage collect after exec, not always, once every 100 requests
+    global requests
+    requests = ('requests' in globals()) and (requests+1) % 100 or 0
+    if not requests: gc.collect()
+    # end garbage collection logic
+    raise HTTP(response.status, page, **response.headers)
+
+
+def start_response_aux(status, headers, exc_info, response=None):
+    """
+    in controller you can use::
+
+    - request.wsgi.environ
+    - request.wsgi.start_response
+
+    to call third party WSGI applications
+    """
+    response.status = str(status).split(' ',1)[0]
+    response.headers = dict(headers)
+    return lambda *args, **kargs: response.write(escape=False,*args,**kargs)
+
+
+def middleware_aux(request, response, *middleware_apps):
+    """
+    In you controller use::
+
+        @request.wsgi.middleware(middleware1, middleware2, ...)
+
+    to decorate actions with WSGI middleware. actions must return strings.
+    uses a simulated environment so it may have weird behavior in some cases
+    """
+    def middleware(f):
+        def app(environ, start_response):
+            data = f()
+            start_response(response.status,response.headers.items())
+            if isinstance(data,list):
+                return data
+            return [data]
+        for item in middleware_apps:
+            app=item(app)
+        def caller(app):
+            return app(request.wsgi.environ,request.wsgi.start_response)
+        return lambda caller=caller, app=app: caller(app)
+    return middleware
+
+def environ_aux(environ,request):
+    new_environ = copy.copy(environ)
+    new_environ['wsgi.input'] = request.body
+    new_environ['wsgi.version'] = 1
+    return new_environ
+
+def parse_get_post_vars(request, environ):
+
+    # always parse variables in URL for GET, POST, PUT, DELETE, etc. in get_vars
+    dget = cgi.parse_qsl(request.env.query_string or '', keep_blank_values=1)
+    for (key, value) in dget:
+        if key in request.get_vars:
+            if isinstance(request.get_vars[key], list):
+                request.get_vars[key] += [value]
+            else:
+                request.get_vars[key] = [request.get_vars[key]] + [value]
+        else:
+            request.get_vars[key] = value
+        request.vars[key] = request.get_vars[key]
+
+    # parse POST variables on POST, PUT, BOTH only in post_vars
+    request.body = copystream_progress(request) ### stores request body
+    if (request.body and request.env.request_method in ('POST', 'PUT', 'BOTH')):
+        dpost = cgi.FieldStorage(fp=request.body,environ=environ,keep_blank_values=1)
+        # The same detection used by FieldStorage to detect multipart POSTs
+        is_multipart = dpost.type[:10] == 'multipart/'
+        request.body.seek(0)
+        isle25 = sys.version_info[1] <= 5
+
+        def listify(a):
+            return (not isinstance(a,list) and [a]) or a
+        try:
+            keys = sorted(dpost)
+        except TypeError:
+            keys = []
+        for key in keys:
+            dpk = dpost[key]
+            # if en element is not a file replace it with its value else leave it alone
+            if isinstance(dpk, list):
+                if not dpk[0].filename:
+                    value = [x.value for x in dpk]
+                else:
+                    value = [x for x in dpk]
+            elif not dpk.filename:
+                value = dpk.value
+            else:
+                value = dpk
+            pvalue = listify(value)
+            if key in request.vars:
+                gvalue = listify(request.vars[key])
+                if isle25:
+                    value = pvalue + gvalue
+                elif is_multipart:
+                    pvalue = pvalue[len(gvalue):]
+                else:
+                    pvalue = pvalue[:-len(gvalue)]
+            request.vars[key] = value
+            if len(pvalue):
+                request.post_vars[key] = (len(pvalue)>1 and pvalue) or pvalue[0]
+
+
+def wsgibase(environ, responder):
+    """
+    this is the gluon wsgi application. the first function called when a page
+    is requested (static or dynamic). it can be called by paste.httpserver
+    or by apache mod_wsgi.
+
+      - fills request with info
+      - the environment variables, replacing '.' with '_'
+      - adds web2py path and version info
+      - compensates for fcgi missing path_info and query_string
+      - validates the path in url
+
+    The url path must be either:
+
+    1. for static pages:
+
+      - /<application>/static/<file>
+
+    2. for dynamic pages:
+
+      - /<application>[/<controller>[/<function>[/<sub>]]][.<extension>]
+      - (sub may go several levels deep, currently 3 levels are supported:
+         sub1/sub2/sub3)
+
+    The naming conventions are:
+
+      - application, controller, function and extension may only contain
+        [a-zA-Z0-9_]
+      - file and sub may also contain '-', '=', '.' and '/'
+    """
+
+    current.__dict__.clear()
+    request = Request()
+    response = Response()
+    session = Session()
+    request.env.web2py_path = global_settings.applications_parent
+    request.env.web2py_version = web2py_version
+    request.env.update(global_settings)
+    static_file = False
+    try:
+        try:
+            try:
+                # ##################################################
+                # handle fcgi missing path_info and query_string
+                # select rewrite parameters
+                # rewrite incoming URL
+                # parse rewritten header variables
+                # parse rewritten URL
+                # serve file if static
+                # ##################################################
+
+                if not environ.get('PATH_INFO',None) and \
+                        environ.get('REQUEST_URI',None):
+                    # for fcgi, get path_info and query_string from request_uri
+                    items = environ['REQUEST_URI'].split('?')
+                    environ['PATH_INFO'] = items[0]
+                    if len(items) > 1:
+                        environ['QUERY_STRING'] = items[1]
+                    else:
+                        environ['QUERY_STRING'] = ''
+                if not environ.get('HTTP_HOST',None):
+                    environ['HTTP_HOST'] = '%s:%s' % (environ.get('SERVER_NAME'),
+                                                      environ.get('SERVER_PORT'))
+
+                (static_file, environ) = rewrite.url_in(request, environ)
+                if static_file:
+                    if request.env.get('query_string', '')[:10] == 'attachment':
+                        response.headers['Content-Disposition'] = 'attachment'
+                    response.stream(static_file, request=request)
+
+                # ##################################################
+                # fill in request items
+                # ##################################################
+
+                http_host = request.env.http_host.split(':',1)[0]
+
+                local_hosts = [http_host,'::1','127.0.0.1','::ffff:127.0.0.1']
+                if not global_settings.web2py_runtime_gae:
+                    local_hosts += [socket.gethostname(),
+                                    socket.gethostbyname(http_host)]
+                request.client = get_client(request.env)
+                request.folder = abspath('applications',
+                                         request.application) + os.sep
+                x_req_with = str(request.env.http_x_requested_with).lower()
+                request.ajax = x_req_with == 'xmlhttprequest'
+                request.cid = request.env.http_web2py_component_element
+                request.is_local = request.env.remote_addr in local_hosts
+                request.is_https = request.env.wsgi_url_scheme \
+                    in ['https', 'HTTPS'] or request.env.https == 'on'
+
+                # ##################################################
+                # compute a request.uuid to be used for tickets and toolbar
+                # ##################################################
+
+                response.uuid = request.compute_uuid()
+
+                # ##################################################
+                # access the requested application
+                # ##################################################
+
+                if not os.path.exists(request.folder):
+                    if request.application == rewrite.thread.routes.default_application and request.application != 'welcome':
+                        request.application = 'welcome'
+                        redirect(Url(r=request))
+                    elif rewrite.thread.routes.error_handler:
+                        redirect(Url(rewrite.thread.routes.error_handler['application'],
+                                     rewrite.thread.routes.error_handler['controller'],
+                                     rewrite.thread.routes.error_handler['function'],
+                                     args=request.application))
+                    else:
+                        raise HTTP(404,
+                                   rewrite.thread.routes.error_message % 'invalid request',
+                                   web2py_error='invalid application')
+                request.url = Url(r=request, args=request.args,
+                                       extension=request.raw_extension)
+
+                # ##################################################
+                # build missing folders
+                # ##################################################
+
+                create_missing_app_folders(request)
+
+                # ##################################################
+                # get the GET and POST data
+                # ##################################################
+
+                parse_get_post_vars(request, environ)
+
+                # ##################################################
+                # expose wsgi hooks for convenience
+                # ##################################################
+
+                request.wsgi.environ = environ_aux(environ,request)
+                request.wsgi.start_response = lambda status='200', headers=[], \
+                    exec_info=None, response=response: \
+                    start_response_aux(status, headers, exec_info, response)
+                request.wsgi.middleware = lambda *a: middleware_aux(request,response,*a)
+
+                # ##################################################
+                # load cookies
+                # ##################################################
+
+                if request.env.http_cookie:
+                    try:
+                        request.cookies.load(request.env.http_cookie)
+                    except Cookie.CookieError, e:
+                        pass # invalid cookies
+
+                # ##################################################
+                # try load session or create new session file
+                # ##################################################
+
+                session.connect(request, response)
+
+                # ##################################################
+                # set no-cache headers
+                # ##################################################
+
+                response.headers['Content-Type'] = contenttype('.'+request.extension)
+                response.headers['Cache-Control'] = \
+                    'no-store, no-cache, must-revalidate, post-check=0, pre-check=0'
+                response.headers['Expires'] = \
+                    time.strftime('%a, %d %b %Y %H:%M:%S GMT', time.gmtime())
+                response.headers['Pragma'] = 'no-cache'
+
+                # ##################################################
+                # run controller
+                # ##################################################
+
+                serve_controller(request, response, session)
+
+            except HTTP, http_response:
+                if static_file:
+                    return http_response.to(responder)
+
+                if request.body:
+                    request.body.close()
+
+                # ##################################################
+                # on success, try store session in database
+                # ##################################################
+                session._try_store_in_db(request, response)
+
+                # ##################################################
+                # on success, commit database
+                # ##################################################
+
+                if response._custom_commit:
+                    response._custom_commit()
+                else:
+                    BaseAdapter.close_all_instances('commit')
+
+                # ##################################################
+                # if session not in db try store session on filesystem
+                # this must be done after trying to commit database!
+                # ##################################################
+
+                session._try_store_on_disk(request, response)
+
+                # ##################################################
+                # store cookies in headers
+                # ##################################################
+
+                if request.cid:
+
+                    if response.flash and not 'web2py-component-flash' in http_response.headers:
+                        http_response.headers['web2py-component-flash'] = \
+                            str(response.flash).replace('\n','')
+                    if response.js and not 'web2py-component-command' in http_response.headers:
+                        http_response.headers['web2py-component-command'] = \
+                            response.js.replace('\n','')
+                if session._forget and \
+                        response.session_id_name in response.cookies:
+                    del response.cookies[response.session_id_name]
+                elif session._secure:
+                    response.cookies[response.session_id_name]['secure'] = True
+                if len(response.cookies)>0:
+                    http_response.headers['Set-Cookie'] = \
+                        [str(cookie)[11:] for cookie in response.cookies.values()]
+                ticket=None
+
+            except RestrictedError, e:
+
+                if request.body:
+                    request.body.close()
+
+                # ##################################################
+                # on application error, rollback database
+                # ##################################################
+
+                ticket = e.log(request) or 'unknown'
+                if response._custom_rollback:
+                    response._custom_rollback()
+                else:
+                    BaseAdapter.close_all_instances('rollback')
+
+                http_response = \
+                    HTTP(500,
+                         rewrite.thread.routes.error_message_ticket % dict(ticket=ticket),
+                         web2py_error='ticket %s' % ticket)
+
+        except:
+
+            if request.body:
+                request.body.close()
+
+            # ##################################################
+            # on application error, rollback database
+            # ##################################################
+
+            try:
+                if response._custom_rollback:
+                    response._custom_rollback()
+                else:
+                    BaseAdapter.close_all_instances('rollback')
+            except:
+                pass
+            e = RestrictedError('Framework', '', '', locals())
+            ticket = e.log(request) or 'unrecoverable'
+            http_response = \
+                HTTP(500,
+                     rewrite.thread.routes.error_message_ticket % dict(ticket=ticket),
+                     web2py_error='ticket %s' % ticket)
+
+    finally:
+        if response and hasattr(response, 'session_file') and response.session_file:
+            response.session_file.close()
+#         if global_settings.debugging:
+#             import gluon.debug
+#             gluon.debug.stop_trace()
+
+    session._unlock(response)
+    http_response, new_environ = rewrite.try_rewrite_on_error(
+        http_response, request, environ, ticket)
+    if not http_response:
+        return wsgibase(new_environ,responder)
+    if global_settings.web2py_crontype == 'soft':
+        newcron.softcron(global_settings.applications_parent).start()
+    return http_response.to(responder)
+    
+
+def save_password(password, port):
+    """
+    used by main() to save the password in the parameters_port.py file.
+    """
+
+    password_file = abspath('parameters_%i.py' % port)
+    if password == '<random>':
+        # make up a new password
+        chars = string.letters + string.digits
+        password = ''.join([random.choice(chars) for i in range(8)])
+        cpassword = CRYPT()(password)[0]
+        print '******************* IMPORTANT!!! ************************'
+        print 'your admin password is "%s"' % password
+        print '*********************************************************'
+    elif password == '<recycle>':
+        # reuse the current password if any
+        if os.path.exists(password_file):
+            return
+        else:
+            password = ''
+    elif password.startswith('<pam_user:'):
+        # use the pam password for specified user
+        cpassword = password[1:-1]
+    else:
+        # use provided password
+        cpassword = CRYPT()(password)[0]
+    fp = open(password_file, 'w')
+    if password:
+        fp.write('password="%s"\n' % cpassword)
+    else:
+        fp.write('password=None\n')
+    fp.close()
+
+
+def appfactory(wsgiapp=wsgibase,
+               logfilename='httpserver.log',
+               profilerfilename='profiler.log'):
+    """
+    generates a wsgi application that does logging and profiling and calls
+    wsgibase
+
+    .. function:: gluon.main.appfactory(
+            [wsgiapp=wsgibase
+            [, logfilename='httpserver.log'
+            [, profilerfilename='profiler.log']]])
+
+    """
+    if profilerfilename and os.path.exists(profilerfilename):
+        os.unlink(profilerfilename)
+    locker = thread.allocate_lock()
+
+    def app_with_logging(environ, responder):
+        """
+        a wsgi app that does logging and profiling and calls wsgibase
+        """
+        status_headers = []
+
+        def responder2(s, h):
+            """
+            wsgi responder app
+            """
+            status_headers.append(s)
+            status_headers.append(h)
+            return responder(s, h)
+
+        time_in = time.time()
+        ret = [0]
+        if not profilerfilename:
+            ret[0] = wsgiapp(environ, responder2)
+        else:
+            import cProfile
+            import pstats
+            logger.warn('profiler is on. this makes web2py slower and serial')
+
+            locker.acquire()
+            cProfile.runctx('ret[0] = wsgiapp(environ, responder2)',
+                            globals(), locals(), profilerfilename+'.tmp')
+            stat = pstats.Stats(profilerfilename+'.tmp')
+            stat.stream = cStringIO.StringIO()
+            stat.strip_dirs().sort_stats("time").print_stats(80)
+            profile_out = stat.stream.getvalue()
+            profile_file = open(profilerfilename, 'a')
+            profile_file.write('%s\n%s\n%s\n%s\n\n' % \
+               ('='*60, environ['PATH_INFO'], '='*60, profile_out))
+            profile_file.close()
+            locker.release()
+        try:
+            line = '%s, %s, %s, %s, %s, %s, %f\n' % (
+                environ['REMOTE_ADDR'],
+                datetime.datetime.today().strftime('%Y-%m-%d %H:%M:%S'),
+                environ['REQUEST_METHOD'],
+                environ['PATH_INFO'].replace(',', '%2C'),
+                environ['SERVER_PROTOCOL'],
+                (status_headers[0])[:3],
+                time.time() - time_in,
+                )
+            if not logfilename:
+                sys.stdout.write(line)
+            elif isinstance(logfilename, str):
+                write_file(logfilename, line, 'a')
+            else:
+                logfilename.write(line)
+        except:
+            pass
+        return ret[0]
+
+    return app_with_logging
+
+
+class HttpServer(object):
+    """
+    the web2py web server (Rocket)
+    """
+
+    def __init__(
+        self,
+        ip='127.0.0.1',
+        port=8000,
+        password='',
+        pid_filename='httpserver.pid',
+        log_filename='httpserver.log',
+        profiler_filename=None,
+        ssl_certificate=None,
+        ssl_private_key=None,
+        min_threads=None,
+        max_threads=None,
+        server_name=None,
+        request_queue_size=5,
+        timeout=10,
+        shutdown_timeout=None, # Rocket does not use a shutdown timeout
+        path=None,
+        interfaces=None # Rocket is able to use several interfaces - must be list of socket-tuples as string
+        ):
+        """
+        starts the web server.
+        """
+
+        if interfaces:
+            # if interfaces is specified, it must be tested for rocket parameter correctness
+            # not necessarily completely tested (e.g. content of tuples or ip-format)
+            import types
+            if isinstance(interfaces,types.ListType):
+                for i in interfaces:
+                    if not isinstance(i,types.TupleType):
+                        raise "Wrong format for rocket interfaces parameter - see http://packages.python.org/rocket/"
+            else:
+                raise "Wrong format for rocket interfaces parameter - see http://packages.python.org/rocket/"
+
+        if path:
+            # if a path is specified change the global variables so that web2py
+            # runs from there instead of cwd or os.environ['web2py_path']
+            global web2py_path
+            path = os.path.normpath(path)
+            web2py_path = path
+            global_settings.applications_parent = path
+            os.chdir(path)
+            [add_path_first(p) for p in (path, abspath('site-packages'), "")]
+
+        save_password(password, port)
+        self.pid_filename = pid_filename
+        if not server_name:
+            server_name = socket.gethostname()
+        logger.info('starting web server...')
+        rocket.SERVER_NAME = server_name
+        sock_list = [ip, port]
+        if not ssl_certificate or not ssl_private_key:
+            logger.info('SSL is off')
+        elif not rocket.ssl:
+            logger.warning('Python "ssl" module unavailable. SSL is OFF')
+        elif not os.path.exists(ssl_certificate):
+            logger.warning('unable to open SSL certificate. SSL is OFF')
+        elif not os.path.exists(ssl_private_key):
+            logger.warning('unable to open SSL private key. SSL is OFF')
+        else:
+            sock_list.extend([ssl_private_key, ssl_certificate])
+            logger.info('SSL is ON')
+        app_info = {'wsgi_app': appfactory(wsgibase,
+                                           log_filename,
+                                           profiler_filename) }
+
+        self.server = rocket.Rocket(interfaces or tuple(sock_list),
+                                    method='wsgi',
+                                    app_info=app_info,
+                                    min_threads=min_threads,
+                                    max_threads=max_threads,
+                                    queue_size=int(request_queue_size),
+                                    timeout=int(timeout),
+                                    handle_signals=False,
+                                    )
+
+
+    def start(self):
+        """
+        start the web server
+        """
+        try:
+            signal.signal(signal.SIGTERM, lambda a, b, s=self: s.stop())
+            signal.signal(signal.SIGINT, lambda a, b, s=self: s.stop())
+        except:
+            pass
+        write_file(self.pid_filename, str(os.getpid()))
+        self.server.start()
+
+    def stop(self, stoplogging=False):
+        """
+        stop cron and the web server
+        """
+        newcron.stopcron()
+        self.server.stop(stoplogging)
+        try:
+            os.unlink(self.pid_filename)
+        except:
+            pass
+

ADDED   gluon/myregex.py
Index: gluon/myregex.py
==================================================================
--- /dev/null
+++ gluon/myregex.py
@@ -0,0 +1,29 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+"""
+
+import re
+
+# pattern to find defined tables
+
+regex_tables = re.compile(\
+    """^[\w]+\.define_table\(\s*[\'\"](?P<name>[\w_]+)[\'\"]""",
+    flags=re.M)
+
+# pattern to find exposed functions in controller
+
+regex_expose = re.compile(\
+    '^def\s+(?P<name>(?:[a-zA-Z0-9]\w*)|(?:_[a-zA-Z0-9]\w*))\(\)\s*:',
+    flags=re.M)
+
+regex_include = re.compile(\
+    '(?P<all>\{\{\s*include\s+[\'"](?P<name>[^\'"]*)[\'"]\s*\}\})')
+
+regex_extend = re.compile(\
+    '^\s*(?P<all>\{\{\s*extend\s+[\'"](?P<name>[^\'"]+)[\'"]\s*\}\})',re.MULTILINE)
+

ADDED   gluon/newcron.py
Index: gluon/newcron.py
==================================================================
--- /dev/null
+++ gluon/newcron.py
@@ -0,0 +1,313 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+Created by Attila Csipa <web2py@csipa.in.rs>
+Modified by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+"""
+
+import sys
+import os
+import threading
+import logging
+import time
+import sched
+import re
+import datetime
+import platform
+import portalocker
+import fileutils
+import cPickle
+from settings import global_settings
+
+logger = logging.getLogger("web2py.cron")
+_cron_stopping = False
+
+def stopcron():
+    "graceful shutdown of cron"
+    global _cron_stopping
+    _cron_stopping = True
+
+class extcron(threading.Thread):
+
+    def __init__(self, applications_parent):
+        threading.Thread.__init__(self)
+        self.setDaemon(False)
+        self.path = applications_parent
+        crondance(self.path, 'external', startup=True)
+
+    def run(self):
+        if not _cron_stopping:
+            logger.debug('external cron invocation')
+            crondance(self.path, 'external', startup=False)
+
+class hardcron(threading.Thread):
+
+    def __init__(self, applications_parent):
+        threading.Thread.__init__(self)
+        self.setDaemon(True)
+        self.path = applications_parent
+        crondance(self.path, 'hard', startup=True)
+
+    def launch(self):
+        if not _cron_stopping:
+            logger.debug('hard cron invocation')
+            crondance(self.path, 'hard', startup = False)
+
+    def run(self):
+        s = sched.scheduler(time.time, time.sleep)
+        logger.info('Hard cron daemon started')
+        while not _cron_stopping:
+            now = time.time()
+            s.enter(60 - now % 60, 1, self.launch, ())
+            s.run()
+
+class softcron(threading.Thread):
+
+    def __init__(self, applications_parent):
+        threading.Thread.__init__(self)
+        self.path = applications_parent
+        crondance(self.path, 'soft', startup=True)
+
+    def run(self):
+        if not _cron_stopping:
+            logger.debug('soft cron invocation')
+            crondance(self.path, 'soft', startup=False)
+
+class Token(object):
+
+    def __init__(self,path):
+        self.path = os.path.join(path, 'cron.master')
+        if not os.path.exists(self.path):
+            fileutils.write_file(self.path, '', 'wb')
+        self.master = None
+        self.now = time.time()
+
+    def acquire(self,startup=False):
+        """
+        returns the time when the lock is acquired or
+        None if cron already running
+
+        lock is implemented by writing a pickle (start, stop) in cron.master
+        start is time when cron job starts and stop is time when cron completed
+        stop == 0 if job started but did not yet complete
+        if a cron job started within less than 60 seconds, acquire returns None
+        if a cron job started before 60 seconds and did not stop,
+        a warning is issue "Stale cron.master detected"
+        """
+        if portalocker.LOCK_EX == None:
+            logger.warning('WEB2PY CRON: Disabled because no file locking')
+            return None
+        self.master = open(self.path,'rb+')
+        try:
+            ret = None
+            portalocker.lock(self.master,portalocker.LOCK_EX)
+            try:
+                (start, stop) =  cPickle.load(self.master)
+            except:
+                (start, stop) = (0, 1)
+            if startup or self.now - start > 59.99:
+                ret = self.now
+                if not stop:
+                    # this happens if previous cron job longer than 1 minute
+                    logger.warning('WEB2PY CRON: Stale cron.master detected')
+                logger.debug('WEB2PY CRON: Acquiring lock')
+                self.master.seek(0)
+                cPickle.dump((self.now,0),self.master)
+        finally:
+            portalocker.unlock(self.master)
+        if not ret:
+            # do this so no need to release
+            self.master.close()
+        return ret
+
+    def release(self):
+        """
+        this function writes into cron.master the time when cron job
+        was completed
+        """
+        if not self.master.closed:
+            portalocker.lock(self.master,portalocker.LOCK_EX)
+            logger.debug('WEB2PY CRON: Releasing cron lock')
+            self.master.seek(0)
+            (start, stop) =  cPickle.load(self.master)
+            if start == self.now: # if this is my lock
+                self.master.seek(0)
+                cPickle.dump((self.now,time.time()),self.master)
+            portalocker.unlock(self.master)
+            self.master.close()
+
+
+def rangetolist(s, period='min'):
+    retval = []
+    if s.startswith('*'):
+        if period == 'min':
+            s = s.replace('*', '0-59', 1)
+        elif period == 'hr':
+            s = s.replace('*', '0-23', 1)
+        elif period == 'dom':
+            s = s.replace('*', '1-31', 1)
+        elif period == 'mon':
+            s = s.replace('*', '1-12', 1)
+        elif period == 'dow':
+            s = s.replace('*', '0-6', 1)
+    m = re.compile(r'(\d+)-(\d+)/(\d+)')
+    match = m.match(s)
+    if match:
+        for i in range(int(match.group(1)), int(match.group(2)) + 1):
+            if i % int(match.group(3)) == 0:
+                retval.append(i)
+    return retval
+
+
+def parsecronline(line):
+    task = {}
+    if line.startswith('@reboot'):
+        line=line.replace('@reboot', '-1 * * * *')
+    elif line.startswith('@yearly'):
+        line=line.replace('@yearly', '0 0 1 1 *')
+    elif line.startswith('@annually'):
+        line=line.replace('@annually', '0 0 1 1 *')
+    elif line.startswith('@monthly'):
+        line=line.replace('@monthly', '0 0 1 * *')
+    elif line.startswith('@weekly'):
+        line=line.replace('@weekly', '0 0 * * 0')
+    elif line.startswith('@daily'):
+        line=line.replace('@daily', '0 0 * * *')
+    elif line.startswith('@midnight'):
+        line=line.replace('@midnight', '0 0 * * *')
+    elif line.startswith('@hourly'):
+        line=line.replace('@hourly', '0 * * * *')
+    params = line.strip().split(None, 6)
+    if len(params) < 7:
+        return None
+    daysofweek={'sun':0,'mon':1,'tue':2,'wed':3,'thu':4,'fri':5,'sat':6}
+    for (s, id) in zip(params[:5], ['min', 'hr', 'dom', 'mon', 'dow']):
+        if not s in [None, '*']:
+            task[id] = []
+            vals = s.split(',')
+            for val in vals:
+                if val != '-1' and '-' in val and '/' not in val:
+                    val = '%s/1' % val
+                if '/' in val:
+                    task[id] += rangetolist(val, id)
+                elif val.isdigit() or val=='-1':
+                    task[id].append(int(val))
+                elif id=='dow' and val[:3].lower() in daysofweek:
+                    task[id].append(daysofweek(val[:3].lower()))
+    task['user'] = params[5]
+    task['cmd'] = params[6]
+    return task
+
+
+class cronlauncher(threading.Thread):
+
+    def __init__(self, cmd, shell=True):
+        threading.Thread.__init__(self)
+        if platform.system() == 'Windows':
+            shell = False
+        elif isinstance(cmd,list):
+            cmd = ' '.join(cmd)
+        self.cmd = cmd
+        self.shell = shell
+
+    def run(self):
+        import subprocess
+        proc = subprocess.Popen(self.cmd,
+                                stdin=subprocess.PIPE,
+                                stdout=subprocess.PIPE,
+                                stderr=subprocess.PIPE,
+                                shell=self.shell)
+        (stdoutdata,stderrdata) = proc.communicate()
+        if proc.returncode != 0:
+            logger.warning(
+                'WEB2PY CRON Call returned code %s:\n%s' % \
+                    (proc.returncode, stdoutdata+stderrdata))
+        else:
+            logger.debug('WEB2PY CRON Call returned success:\n%s' \
+                              % stdoutdata)
+
+def crondance(applications_parent, ctype='soft', startup=False):
+    apppath = os.path.join(applications_parent,'applications')
+    cron_path = os.path.join(apppath,'admin','cron')
+    token = Token(cron_path)
+    cronmaster = token.acquire(startup=startup)
+    if not cronmaster:
+        return
+    now_s = time.localtime()
+    checks=(('min',now_s.tm_min),
+            ('hr',now_s.tm_hour),
+            ('mon',now_s.tm_mon),
+            ('dom',now_s.tm_mday),
+            ('dow',(now_s.tm_wday+1)%7))
+
+    apps = [x for x in os.listdir(apppath)
+            if os.path.isdir(os.path.join(apppath, x))]
+
+    for app in apps:
+        if _cron_stopping:
+            break;
+        apath = os.path.join(apppath,app)
+        cronpath = os.path.join(apath, 'cron')
+        crontab = os.path.join(cronpath, 'crontab')
+        if not os.path.exists(crontab):
+            continue
+        try:
+            cronlines = fileutils.readlines_file(crontab, 'rt')
+            lines = [x.strip() for x in cronlines if x.strip() and not x.strip().startswith('#')]
+            tasks = [parsecronline(cline) for cline in lines]
+        except Exception, e:
+            logger.error('WEB2PY CRON: crontab read error %s' % e)
+            continue
+
+        for task in tasks:
+            if _cron_stopping:
+                break;
+            commands = [sys.executable]
+            w2p_path = fileutils.abspath('web2py.py', gluon=True)
+            if os.path.exists(w2p_path):
+                commands.append(w2p_path)
+            if global_settings.applications_parent != global_settings.gluon_parent:
+                commands.extend(('-f', global_settings.applications_parent))
+            citems = [(k in task and not v in task[k]) for k,v in checks]
+            task_min= task.get('min',[])
+            if not task:
+                continue
+            elif not startup and task_min == [-1]:
+                continue
+            elif task_min != [-1] and reduce(lambda a,b: a or b, citems):
+                continue
+            logger.info('WEB2PY CRON (%s): %s executing %s in %s at %s' \
+                             % (ctype, app, task.get('cmd'),
+                                os.getcwd(), datetime.datetime.now()))
+            action, command, models = False, task['cmd'], ''
+            if command.startswith('**'):
+                (action,models,command) = (True,'',command[2:])
+            elif command.startswith('*'):
+                (action,models,command) = (True,'-M',command[1:])
+            else:
+                action=False
+            if action and command.endswith('.py'):
+                commands.extend(('-J',                # cron job
+                                 models,              # import models?
+                                 '-S', app,           # app name
+                                 '-a', '"<recycle>"', # password
+                                 '-R', command))      # command
+                shell = True
+            elif action:
+                commands.extend(('-J',                  # cron job
+                                 models,                # import models?
+                                 '-S', app+'/'+command, # app name
+                                 '-a', '"<recycle>"'))  # password
+                shell = True
+            else:
+                commands = command
+                shell = False
+            try:
+                cronlauncher(commands, shell=shell).start()
+            except Exception, e:
+                logger.warning(
+                    'WEB2PY CRON: Execution error for %s: %s' \
+                        % (task.get('cmd'), e))
+    token.release()
+

ADDED   gluon/portalocker.py
Index: gluon/portalocker.py
==================================================================
--- /dev/null
+++ gluon/portalocker.py
@@ -0,0 +1,123 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+# portalocker.py - Cross-platform (posix/nt) API for flock-style file locking.
+#                  Requires python 1.5.2 or better.
+
+"""
+Cross-platform (posix/nt) API for flock-style file locking.
+
+Synopsis:
+
+   import portalocker
+   file = open(\"somefile\", \"r+\")
+   portalocker.lock(file, portalocker.LOCK_EX)
+   file.seek(12)
+   file.write(\"foo\")
+   file.close()
+
+If you know what you're doing, you may choose to
+
+   portalocker.unlock(file)
+
+before closing the file, but why?
+
+Methods:
+
+   lock( file, flags )
+   unlock( file )
+
+Constants:
+
+   LOCK_EX
+   LOCK_SH
+   LOCK_NB
+
+I learned the win32 technique for locking files from sample code
+provided by John Nielsen <nielsenjf@my-deja.com> in the documentation
+that accompanies the win32 modules.
+
+Author: Jonathan Feinberg <jdf@pobox.com>
+Version: $Id: portalocker.py,v 1.3 2001/05/29 18:47:55 Administrator Exp $
+"""
+
+import os
+import logging
+import platform
+logger = logging.getLogger("web2py")
+
+os_locking = None
+try:
+    import fcntl
+    os_locking = 'posix'
+except:
+    pass
+try:
+    import win32con
+    import win32file
+    import pywintypes
+    os_locking = 'windows'
+except:
+    pass
+
+if os_locking == 'windows':
+    LOCK_EX = win32con.LOCKFILE_EXCLUSIVE_LOCK
+    LOCK_SH = 0  # the default
+    LOCK_NB = win32con.LOCKFILE_FAIL_IMMEDIATELY
+
+    # is there any reason not to reuse the following structure?
+
+    __overlapped = pywintypes.OVERLAPPED()
+
+    def lock(file, flags):
+        hfile = win32file._get_osfhandle(file.fileno())
+        win32file.LockFileEx(hfile, flags, 0, 0x7fff0000, __overlapped)
+
+    def unlock(file):
+        hfile = win32file._get_osfhandle(file.fileno())
+        win32file.UnlockFileEx(hfile, 0, 0x7fff0000, __overlapped)
+
+
+elif os_locking == 'posix':
+    LOCK_EX = fcntl.LOCK_EX
+    LOCK_SH = fcntl.LOCK_SH
+    LOCK_NB = fcntl.LOCK_NB
+
+    def lock(file, flags):
+        fcntl.flock(file.fileno(), flags)
+
+    def unlock(file):
+        fcntl.flock(file.fileno(), fcntl.LOCK_UN)
+
+
+else:
+    if platform.system() == 'Windows':
+        logger.error('no file locking, you must install the win32 extensions from: http://sourceforge.net/projects/pywin32/files/')
+    else:
+        logger.debug('no file locking, this will cause problems')
+
+    LOCK_EX = None
+    LOCK_SH = None
+    LOCK_NB = None
+
+    def lock(file, flags):
+        pass
+
+    def unlock(file):
+        pass
+
+
+if __name__ == '__main__':
+    from time import time, strftime, localtime
+    import sys
+
+    log = open('log.txt', 'a+')
+    lock(log, LOCK_EX)
+
+    timestamp = strftime('%m/%d/%Y %H:%M:%S\n', localtime(time()))
+    log.write(timestamp)
+
+    print 'Wrote lines. Hit enter to release lock.'
+    dummy = sys.stdin.readline()
+
+    log.close()
+

ADDED   gluon/reserved_sql_keywords.py
Index: gluon/reserved_sql_keywords.py
==================================================================
--- /dev/null
+++ gluon/reserved_sql_keywords.py
@@ -0,0 +1,1714 @@
+# encoding utf-8
+
+__author__ = "Thadeus Burgess <thadeusb@thadeusb.com>"
+
+#    we classify as "non-reserved" those key words that are explicitly known
+#    to the parser but are allowed as column or table names. Some key words
+#    that are otherwise non-reserved cannot be used as function or data type n
+#    ames and are in the nonreserved list. (Most of these words represent
+#    built-in functions or data types with special syntax. The function
+#    or type is still available but it cannot be redefined by the user.)
+#    Labeled "reserved" are those tokens that are not allowed as column or
+#    table names. Some reserved key words are allowable as names for
+#    functions or data typesself.
+
+# Note at the bottom of the list is a dict containing references to the
+# tuples, and also if you add a list don't forget to remove its default
+# set of COMMON.
+
+# Keywords that are adapter specific. Such as a list of "postgresql"
+# or "mysql" keywords
+
+# These are keywords that are common to all SQL dialects, and should
+# never be used as a table or column. Even if you use one of these
+# the cursor will throw an OperationalError for the SQL syntax.
+COMMON = set((
+    'SELECT',
+    'INSERT',
+    'DELETE',
+    'UPDATE',
+    'DROP',
+    'CREATE',
+    'ALTER',
+
+    'WHERE',
+    'FROM',
+    'INNER',
+    'JOIN',
+    'AND',
+    'OR',
+    'LIKE',
+    'ON',
+    'IN',
+    'SET',
+
+    'BY',
+    'GROUP',
+    'ORDER',
+    'LEFT',
+    'OUTER',
+
+    'IF',
+    'END',
+    'THEN',
+    'LOOP',
+    'AS',
+    'ELSE',
+    'FOR',
+
+    'CASE',
+    'WHEN',
+    'MIN',
+    'MAX',
+    'DISTINCT',
+))
+
+
+POSTGRESQL = set((
+    'FALSE',
+    'TRUE',
+    'ALL',
+    'ANALYSE',
+    'ANALYZE',
+    'AND',
+    'ANY',
+    'ARRAY',
+    'AS',
+    'ASC',
+    'ASYMMETRIC',
+    'AUTHORIZATION',
+    'BETWEEN',
+    'BIGINT',
+    'BINARY',
+    'BIT',
+    'BOOLEAN',
+    'BOTH',
+    'CASE',
+    'CAST',
+    'CHAR',
+    'CHARACTER',
+    'CHECK',
+    'COALESCE',
+    'COLLATE',
+    'COLUMN',
+    'CONSTRAINT',
+    'CREATE',
+    'CROSS',
+    'CURRENT_CATALOG',
+    'CURRENT_DATE',
+    'CURRENT_ROLE',
+    'CURRENT_SCHEMA',
+    'CURRENT_TIME',
+    'CURRENT_TIMESTAMP',
+    'CURRENT_USER',
+    'DEC',
+    'DECIMAL',
+    'DEFAULT',
+    'DEFERRABLE',
+    'DESC',
+    'DISTINCT',
+    'DO',
+    'ELSE',
+    'END',
+    'EXCEPT',
+    'EXISTS',
+    'EXTRACT',
+    'FETCH',
+    'FLOAT',
+    'FOR',
+    'FOREIGN',
+    'FREEZE',
+    'FROM',
+    'FULL',
+    'GRANT',
+    'GREATEST',
+    'GROUP',
+    'HAVING',
+    'ILIKE',
+    'IN',
+    'INITIALLY',
+    'INNER',
+    'INOUT',
+    'INT',
+    'INTEGER',
+    'INTERSECT',
+    'INTERVAL',
+    'INTO',
+    'IS',
+    'ISNULL',
+    'JOIN',
+    'LEADING',
+    'LEAST',
+    'LEFT',
+    'LIKE',
+    'LIMIT',
+    'LOCALTIME',
+    'LOCALTIMESTAMP',
+    'NATIONAL',
+    'NATURAL',
+    'NCHAR',
+    'NEW',
+    'NONE',
+    'NOT',
+    'NOTNULL',
+    'NULL',
+    'NULLIF',
+    'NUMERIC',
+    'OFF',
+    'OFFSET',
+    'OLD',
+    'ON',
+    'ONLY',
+    'OR',
+    'ORDER',
+    'OUT',
+    'OUTER',
+    'OVERLAPS',
+    'OVERLAY',
+    'PLACING',
+    'POSITION',
+    'PRECISION',
+    'PRIMARY',
+    'REAL',
+    'REFERENCES',
+    'RETURNING',
+    'RIGHT',
+    'ROW',
+    'SELECT',
+    'SESSION_USER',
+    'SETOF',
+    'SIMILAR',
+    'SMALLINT',
+    'SOME',
+    'SUBSTRING',
+    'SYMMETRIC',
+    'TABLE',
+    'THEN',
+    'TIME',
+    'TIMESTAMP',
+    'TO',
+    'TRAILING',
+    'TREAT',
+    'TRIM',
+    'UNION',
+    'UNIQUE',
+    'USER',
+    'USING',
+    'VALUES',
+    'VARCHAR',
+    'VARIADIC',
+    'VERBOSE',
+    'WHEN',
+    'WHERE',
+    'WITH',
+    'XMLATTRIBUTES',
+    'XMLCONCAT',
+    'XMLELEMENT',
+    'XMLFOREST',
+    'XMLPARSE',
+    'XMLPI',
+    'XMLROOT',
+    'XMLSERIALIZE',
+))
+
+
+POSTGRESQL_NONRESERVED = set((
+    'A',
+    'ABORT',
+    'ABS',
+    'ABSENT',
+    'ABSOLUTE',
+    'ACCESS',
+    'ACCORDING',
+    'ACTION',
+    'ADA',
+    'ADD',
+    'ADMIN',
+    'AFTER',
+    'AGGREGATE',
+    'ALIAS',
+    'ALLOCATE',
+    'ALSO',
+    'ALTER',
+    'ALWAYS',
+    'ARE',
+    'ARRAY_AGG',
+    'ASENSITIVE',
+    'ASSERTION',
+    'ASSIGNMENT',
+    'AT',
+    'ATOMIC',
+    'ATTRIBUTE',
+    'ATTRIBUTES',
+    'AVG',
+    'BACKWARD',
+    'BASE64',
+    'BEFORE',
+    'BEGIN',
+    'BERNOULLI',
+    'BIT_LENGTH',
+    'BITVAR',
+    'BLOB',
+    'BOM',
+    'BREADTH',
+    'BY',
+    'C',
+    'CACHE',
+    'CALL',
+    'CALLED',
+    'CARDINALITY',
+    'CASCADE',
+    'CASCADED',
+    'CATALOG',
+    'CATALOG_NAME',
+    'CEIL',
+    'CEILING',
+    'CHAIN',
+    'CHAR_LENGTH',
+    'CHARACTER_LENGTH',
+    'CHARACTER_SET_CATALOG',
+    'CHARACTER_SET_NAME',
+    'CHARACTER_SET_SCHEMA',
+    'CHARACTERISTICS',
+    'CHARACTERS',
+    'CHECKED',
+    'CHECKPOINT',
+    'CLASS',
+    'CLASS_ORIGIN',
+    'CLOB',
+    'CLOSE',
+    'CLUSTER',
+    'COBOL',
+    'COLLATION',
+    'COLLATION_CATALOG',
+    'COLLATION_NAME',
+    'COLLATION_SCHEMA',
+    'COLLECT',
+    'COLUMN_NAME',
+    'COLUMNS',
+    'COMMAND_FUNCTION',
+    'COMMAND_FUNCTION_CODE',
+    'COMMENT',
+    'COMMIT',
+    'COMMITTED',
+    'COMPLETION',
+    'CONCURRENTLY',
+    'CONDITION',
+    'CONDITION_NUMBER',
+    'CONFIGURATION',
+    'CONNECT',
+    'CONNECTION',
+    'CONNECTION_NAME',
+    'CONSTRAINT_CATALOG',
+    'CONSTRAINT_NAME',
+    'CONSTRAINT_SCHEMA',
+    'CONSTRAINTS',
+    'CONSTRUCTOR',
+    'CONTAINS',
+    'CONTENT',
+    'CONTINUE',
+    'CONVERSION',
+    'CONVERT',
+    'COPY',
+    'CORR',
+    'CORRESPONDING',
+    'COST',
+    'COUNT',
+    'COVAR_POP',
+    'COVAR_SAMP',
+    'CREATEDB',
+    'CREATEROLE',
+    'CREATEUSER',
+    'CSV',
+    'CUBE',
+    'CUME_DIST',
+    'CURRENT',
+    'CURRENT_DEFAULT_TRANSFORM_GROUP',
+    'CURRENT_PATH',
+    'CURRENT_TRANSFORM_GROUP_FOR_TYPE',
+    'CURSOR',
+    'CURSOR_NAME',
+    'CYCLE',
+    'DATA',
+    'DATABASE',
+    'DATE',
+    'DATETIME_INTERVAL_CODE',
+    'DATETIME_INTERVAL_PRECISION',
+    'DAY',
+    'DEALLOCATE',
+    'DECLARE',
+    'DEFAULTS',
+    'DEFERRED',
+    'DEFINED',
+    'DEFINER',
+    'DEGREE',
+    'DELETE',
+    'DELIMITER',
+    'DELIMITERS',
+    'DENSE_RANK',
+    'DEPTH',
+    'DEREF',
+    'DERIVED',
+    'DESCRIBE',
+    'DESCRIPTOR',
+    'DESTROY',
+    'DESTRUCTOR',
+    'DETERMINISTIC',
+    'DIAGNOSTICS',
+    'DICTIONARY',
+    'DISABLE',
+    'DISCARD',
+    'DISCONNECT',
+    'DISPATCH',
+    'DOCUMENT',
+    'DOMAIN',
+    'DOUBLE',
+    'DROP',
+    'DYNAMIC',
+    'DYNAMIC_FUNCTION',
+    'DYNAMIC_FUNCTION_CODE',
+    'EACH',
+    'ELEMENT',
+    'EMPTY',
+    'ENABLE',
+    'ENCODING',
+    'ENCRYPTED',
+    'END-EXEC',
+    'ENUM',
+    'EQUALS',
+    'ESCAPE',
+    'EVERY',
+    'EXCEPTION',
+    'EXCLUDE',
+    'EXCLUDING',
+    'EXCLUSIVE',
+    'EXEC',
+    'EXECUTE',
+    'EXISTING',
+    'EXP',
+    'EXPLAIN',
+    'EXTERNAL',
+    'FAMILY',
+    'FILTER',
+    'FINAL',
+    'FIRST',
+    'FIRST_VALUE',
+    'FLAG',
+    'FLOOR',
+    'FOLLOWING',
+    'FORCE',
+    'FORTRAN',
+    'FORWARD',
+    'FOUND',
+    'FREE',
+    'FUNCTION',
+    'FUSION',
+    'G',
+    'GENERAL',
+    'GENERATED',
+    'GET',
+    'GLOBAL',
+    'GO',
+    'GOTO',
+    'GRANTED',
+    'GROUPING',
+    'HANDLER',
+    'HEADER',
+    'HEX',
+    'HIERARCHY',
+    'HOLD',
+    'HOST',
+    'HOUR',
+#    'ID',
+    'IDENTITY',
+    'IF',
+    'IGNORE',
+    'IMMEDIATE',
+    'IMMUTABLE',
+    'IMPLEMENTATION',
+    'IMPLICIT',
+    'INCLUDING',
+    'INCREMENT',
+    'INDENT',
+    'INDEX',
+    'INDEXES',
+    'INDICATOR',
+    'INFIX',
+    'INHERIT',
+    'INHERITS',
+    'INITIALIZE',
+    'INPUT',
+    'INSENSITIVE',
+    'INSERT',
+    'INSTANCE',
+    'INSTANTIABLE',
+    'INSTEAD',
+    'INTERSECTION',
+    'INVOKER',
+    'ISOLATION',
+    'ITERATE',
+    'K',
+    'KEY',
+    'KEY_MEMBER',
+    'KEY_TYPE',
+    'LAG',
+    'LANCOMPILER',
+    'LANGUAGE',
+    'LARGE',
+    'LAST',
+    'LAST_VALUE',
+    'LATERAL',
+    'LC_COLLATE',
+    'LC_CTYPE',
+    'LEAD',
+    'LENGTH',
+    'LESS',
+    'LEVEL',
+    'LIKE_REGEX',
+    'LISTEN',
+    'LN',
+    'LOAD',
+    'LOCAL',
+    'LOCATION',
+    'LOCATOR',
+    'LOCK',
+    'LOGIN',
+    'LOWER',
+    'M',
+    'MAP',
+    'MAPPING',
+    'MATCH',
+    'MATCHED',
+    'MAX',
+    'MAX_CARDINALITY',
+    'MAXVALUE',
+    'MEMBER',
+    'MERGE',
+    'MESSAGE_LENGTH',
+    'MESSAGE_OCTET_LENGTH',
+    'MESSAGE_TEXT',
+    'METHOD',
+    'MIN',
+    'MINUTE',
+    'MINVALUE',
+    'MOD',
+    'MODE',
+    'MODIFIES',
+    'MODIFY',
+    'MODULE',
+    'MONTH',
+    'MORE',
+    'MOVE',
+    'MULTISET',
+    'MUMPS',
+#    'NAME',
+    'NAMES',
+    'NAMESPACE',
+    'NCLOB',
+    'NESTING',
+    'NEXT',
+    'NFC',
+    'NFD',
+    'NFKC',
+    'NFKD',
+    'NIL',
+    'NO',
+    'NOCREATEDB',
+    'NOCREATEROLE',
+    'NOCREATEUSER',
+    'NOINHERIT',
+    'NOLOGIN',
+    'NORMALIZE',
+    'NORMALIZED',
+    'NOSUPERUSER',
+    'NOTHING',
+    'NOTIFY',
+    'NOWAIT',
+    'NTH_VALUE',
+    'NTILE',
+    'NULLABLE',
+    'NULLS',
+    'NUMBER',
+    'OBJECT',
+    'OCCURRENCES_REGEX',
+    'OCTET_LENGTH',
+    'OCTETS',
+    'OF',
+    'OIDS',
+    'OPEN',
+    'OPERATION',
+    'OPERATOR',
+    'OPTION',
+    'OPTIONS',
+    'ORDERING',
+    'ORDINALITY',
+    'OTHERS',
+    'OUTPUT',
+    'OVER',
+    'OVERRIDING',
+    'OWNED',
+    'OWNER',
+    'P',
+    'PAD',
+    'PARAMETER',
+    'PARAMETER_MODE',
+    'PARAMETER_NAME',
+    'PARAMETER_ORDINAL_POSITION',
+    'PARAMETER_SPECIFIC_CATALOG',
+    'PARAMETER_SPECIFIC_NAME',
+    'PARAMETER_SPECIFIC_SCHEMA',
+    'PARAMETERS',
+    'PARSER',
+    'PARTIAL',
+    'PARTITION',
+    'PASCAL',
+    'PASSING',
+#    'PASSWORD',
+    'PATH',
+    'PERCENT_RANK',
+    'PERCENTILE_CONT',
+    'PERCENTILE_DISC',
+    'PLANS',
+    'PLI',
+    'POSITION_REGEX',
+    'POSTFIX',
+    'POWER',
+    'PRECEDING',
+    'PREFIX',
+    'PREORDER',
+    'PREPARE',
+    'PREPARED',
+    'PRESERVE',
+    'PRIOR',
+    'PRIVILEGES',
+    'PROCEDURAL',
+    'PROCEDURE',
+    'PUBLIC',
+    'QUOTE',
+    'RANGE',
+    'RANK',
+    'READ',
+    'READS',
+    'REASSIGN',
+    'RECHECK',
+    'RECURSIVE',
+    'REF',
+    'REFERENCING',
+    'REGR_AVGX',
+    'REGR_AVGY',
+    'REGR_COUNT',
+    'REGR_INTERCEPT',
+    'REGR_R2',
+    'REGR_SLOPE',
+    'REGR_SXX',
+    'REGR_SXY',
+    'REGR_SYY',
+    'REINDEX',
+    'RELATIVE',
+    'RELEASE',
+    'RENAME',
+    'REPEATABLE',
+    'REPLACE',
+    'REPLICA',
+    'RESET',
+    'RESPECT',
+    'RESTART',
+    'RESTRICT',
+    'RESULT',
+    'RETURN',
+    'RETURNED_CARDINALITY',
+    'RETURNED_LENGTH',
+    'RETURNED_OCTET_LENGTH',
+    'RETURNED_SQLSTATE',
+    'RETURNS',
+    'REVOKE',
+#    'ROLE',
+    'ROLLBACK',
+    'ROLLUP',
+    'ROUTINE',
+    'ROUTINE_CATALOG',
+    'ROUTINE_NAME',
+    'ROUTINE_SCHEMA',
+    'ROW_COUNT',
+    'ROW_NUMBER',
+    'ROWS',
+    'RULE',
+    'SAVEPOINT',
+    'SCALE',
+    'SCHEMA',
+    'SCHEMA_NAME',
+    'SCOPE',
+    'SCOPE_CATALOG',
+    'SCOPE_NAME',
+    'SCOPE_SCHEMA',
+    'SCROLL',
+    'SEARCH',
+    'SECOND',
+    'SECTION',
+    'SECURITY',
+    'SELF',
+    'SENSITIVE',
+    'SEQUENCE',
+    'SERIALIZABLE',
+    'SERVER',
+    'SERVER_NAME',
+    'SESSION',
+    'SET',
+    'SETS',
+    'SHARE',
+    'SHOW',
+    'SIMPLE',
+    'SIZE',
+    'SOURCE',
+    'SPACE',
+    'SPECIFIC',
+    'SPECIFIC_NAME',
+    'SPECIFICTYPE',
+    'SQL',
+    'SQLCODE',
+    'SQLERROR',
+    'SQLEXCEPTION',
+    'SQLSTATE',
+    'SQLWARNING',
+    'SQRT',
+    'STABLE',
+    'STANDALONE',
+    'START',
+    'STATE',
+    'STATEMENT',
+    'STATIC',
+    'STATISTICS',
+    'STDDEV_POP',
+    'STDDEV_SAMP',
+    'STDIN',
+    'STDOUT',
+    'STORAGE',
+    'STRICT',
+    'STRIP',
+    'STRUCTURE',
+    'STYLE',
+    'SUBCLASS_ORIGIN',
+    'SUBLIST',
+    'SUBMULTISET',
+    'SUBSTRING_REGEX',
+    'SUM',
+    'SUPERUSER',
+    'SYSID',
+    'SYSTEM',
+    'SYSTEM_USER',
+    'T',
+#    'TABLE_NAME',
+    'TABLESAMPLE',
+    'TABLESPACE',
+    'TEMP',
+    'TEMPLATE',
+    'TEMPORARY',
+    'TERMINATE',
+    'TEXT',
+    'THAN',
+    'TIES',
+    'TIMEZONE_HOUR',
+    'TIMEZONE_MINUTE',
+    'TOP_LEVEL_COUNT',
+    'TRANSACTION',
+    'TRANSACTION_ACTIVE',
+    'TRANSACTIONS_COMMITTED',
+    'TRANSACTIONS_ROLLED_BACK',
+    'TRANSFORM',
+    'TRANSFORMS',
+    'TRANSLATE',
+    'TRANSLATE_REGEX',
+    'TRANSLATION',
+    'TRIGGER',
+    'TRIGGER_CATALOG',
+    'TRIGGER_NAME',
+    'TRIGGER_SCHEMA',
+    'TRIM_ARRAY',
+    'TRUNCATE',
+    'TRUSTED',
+    'TYPE',
+    'UESCAPE',
+    'UNBOUNDED',
+    'UNCOMMITTED',
+    'UNDER',
+    'UNENCRYPTED',
+    'UNKNOWN',
+    'UNLISTEN',
+    'UNNAMED',
+    'UNNEST',
+    'UNTIL',
+    'UNTYPED',
+    'UPDATE',
+    'UPPER',
+    'URI',
+    'USAGE',
+    'USER_DEFINED_TYPE_CATALOG',
+    'USER_DEFINED_TYPE_CODE',
+    'USER_DEFINED_TYPE_NAME',
+    'USER_DEFINED_TYPE_SCHEMA',
+    'VACUUM',
+    'VALID',
+    'VALIDATOR',
+    'VALUE',
+    'VAR_POP',
+    'VAR_SAMP',
+    'VARBINARY',
+    'VARIABLE',
+    'VARYING',
+    'VERSION',
+    'VIEW',
+    'VOLATILE',
+    'WHENEVER',
+    'WHITESPACE',
+    'WIDTH_BUCKET',
+    'WINDOW',
+    'WITHIN',
+    'WITHOUT',
+    'WORK',
+    'WRAPPER',
+    'WRITE',
+    'XML',
+    'XMLAGG',
+    'XMLBINARY',
+    'XMLCAST',
+    'XMLCOMMENT',
+    'XMLDECLARATION',
+    'XMLDOCUMENT',
+    'XMLEXISTS',
+    'XMLITERATE',
+    'XMLNAMESPACES',
+    'XMLQUERY',
+    'XMLSCHEMA',
+    'XMLTABLE',
+    'XMLTEXT',
+    'XMLVALIDATE',
+    'YEAR',
+    'YES',
+    'ZONE',
+))
+
+#Thanks villas
+FIREBIRD = set((
+    'ABS',
+    'ACTIVE',
+    'ADMIN',
+    'AFTER',
+    'ASCENDING',
+    'AUTO',
+    'AUTODDL',
+    'BASED',
+    'BASENAME',
+    'BASE_NAME',
+    'BEFORE',
+    'BIT_LENGTH',
+    'BLOB',
+    'BLOBEDIT',
+    'BOOLEAN',
+    'BOTH',
+    'BUFFER',
+    'CACHE',
+    'CHAR_LENGTH',
+    'CHARACTER_LENGTH',
+    'CHECK_POINT_LEN',
+    'CHECK_POINT_LENGTH',
+    'CLOSE',
+    'COMMITTED',
+    'COMPILETIME',
+    'COMPUTED',
+    'CONDITIONAL',
+    'CONNECT',
+    'CONTAINING',
+    'CROSS',
+    'CSTRING',
+    'CURRENT_CONNECTION',
+    'CURRENT_ROLE',
+    'CURRENT_TRANSACTION',
+    'CURRENT_USER',
+    'DATABASE',
+    'DB_KEY',
+    'DEBUG',
+    'DESCENDING',
+    'DISCONNECT',
+    'DISPLAY',
+    'DO',
+    'ECHO',
+    'EDIT',
+    'ENTRY_POINT',
+    'EVENT',
+    'EXIT',
+    'EXTERN',
+    'FALSE',
+    'FETCH',
+    'FILE',
+    'FILTER',
+    'FREE_IT',
+    'FUNCTION',
+    'GDSCODE',
+    'GENERATOR',
+    'GEN_ID',
+    'GLOBAL',
+    'GROUP_COMMIT_WAIT',
+    'GROUP_COMMIT_WAIT_TIME',
+    'HELP',
+    'IF',
+    'INACTIVE',
+    'INDEX',
+    'INIT',
+    'INPUT_TYPE',
+    'INSENSITIVE',
+    'ISQL',
+    'LC_MESSAGES',
+    'LC_TYPE',
+    'LEADING',
+    'LENGTH',
+    'LEV',
+    'LOGFILE',
+    'LOG_BUFFER_SIZE',
+    'LOG_BUF_SIZE',
+    'LONG',
+    'LOWER',
+    'MANUAL',
+    'MAXIMUM',
+    'MAXIMUM_SEGMENT',
+    'MAX_SEGMENT',
+    'MERGE',
+    'MESSAGE',
+    'MINIMUM',
+    'MODULE_NAME',
+    'NOAUTO',
+    'NUM_LOG_BUFS',
+    'NUM_LOG_BUFFERS',
+    'OCTET_LENGTH',
+    'OPEN',
+    'OUTPUT_TYPE',
+    'OVERFLOW',
+    'PAGE',
+    'PAGELENGTH',
+    'PAGES',
+    'PAGE_SIZE',
+    'PARAMETER',
+#    'PASSWORD',
+    'PLAN',
+    'POST_EVENT',
+    'QUIT',
+    'RAW_PARTITIONS',
+    'RDB$DB_KEY',
+    'RECORD_VERSION',
+    'RECREATE',
+    'RECURSIVE',
+    'RELEASE',
+    'RESERV',
+    'RESERVING',
+    'RETAIN',
+    'RETURN',
+    'RETURNING_VALUES',
+    'RETURNS',
+#    'ROLE',
+    'ROW_COUNT',
+    'ROWS',
+    'RUNTIME',
+    'SAVEPOINT',
+    'SECOND',
+    'SENSITIVE',
+    'SHADOW',
+    'SHARED',
+    'SHELL',
+    'SHOW',
+    'SINGULAR',
+    'SNAPSHOT',
+    'SORT',
+    'STABILITY',
+    'START',
+    'STARTING',
+    'STARTS',
+    'STATEMENT',
+    'STATIC',
+    'STATISTICS',
+    'SUB_TYPE',
+    'SUSPEND',
+    'TERMINATOR',
+    'TRAILING',
+    'TRIGGER',
+    'TRIM',
+    'TRUE',
+    'TYPE',
+    'UNCOMMITTED',
+    'UNKNOWN',
+    'USING',
+    'VARIABLE',
+    'VERSION',
+    'WAIT',
+    'WEEKDAY',
+    'WHILE',
+    'YEARDAY',
+))
+FIREBIRD_NONRESERVED = set((
+    'BACKUP',
+    'BLOCK',
+    'COALESCE',
+    'COLLATION',
+    'COMMENT',
+    'DELETING',
+    'DIFFERENCE',
+    'IIF',
+    'INSERTING',
+    'LAST',
+    'LEAVE',
+    'LOCK',
+    'NEXT',
+    'NULLIF',
+    'NULLS',
+    'RESTART',
+    'RETURNING',
+    'SCALAR_ARRAY',
+    'SEQUENCE',
+    'STATEMENT',
+    'UPDATING',
+    'ABS',
+    'ACCENT',
+    'ACOS',
+    'ALWAYS',
+    'ASCII_CHAR',
+    'ASCII_VAL',
+    'ASIN',
+    'ATAN',
+    'ATAN2',
+    'BACKUP',
+    'BIN_AND',
+    'BIN_OR',
+    'BIN_SHL',
+    'BIN_SHR',
+    'BIN_XOR',
+    'BLOCK',
+    'CEIL',
+    'CEILING',
+    'COLLATION',
+    'COMMENT',
+    'COS',
+    'COSH',
+    'COT',
+    'DATEADD',
+    'DATEDIFF',
+    'DECODE',
+    'DIFFERENCE',
+    'EXP',
+    'FLOOR',
+    'GEN_UUID',
+    'GENERATED',
+    'HASH',
+    'IIF',
+    'LIST',
+    'LN',
+    'LOG',
+    'LOG10',
+    'LPAD',
+    'MATCHED',
+    'MATCHING',
+    'MAXVALUE',
+    'MILLISECOND',
+    'MINVALUE',
+    'MOD',
+    'NEXT',
+    'OVERLAY',
+    'PAD',
+    'PI',
+    'PLACING',
+    'POWER',
+    'PRESERVE',
+    'RAND',
+    'REPLACE',
+    'RESTART',
+    'RETURNING',
+    'REVERSE',
+    'ROUND',
+    'RPAD',
+    'SCALAR_ARRAY',
+    'SEQUENCE',
+    'SIGN',
+    'SIN',
+    'SINH',
+    'SPACE',
+    'SQRT',
+    'TAN',
+    'TANH',
+    'TEMPORARY',
+    'TRUNC',
+    'WEEK',
+))
+
+# Thanks Jonathan Lundell
+MYSQL = set((
+    'ACCESSIBLE',
+    'ADD',
+    'ALL',
+    'ALTER',
+    'ANALYZE',
+    'AND',
+    'AS',
+    'ASC',
+    'ASENSITIVE',
+    'BEFORE',
+    'BETWEEN',
+    'BIGINT',
+    'BINARY',
+    'BLOB',
+    'BOTH',
+    'BY',
+    'CALL',
+    'CASCADE',
+    'CASE',
+    'CHANGE',
+    'CHAR',
+    'CHARACTER',
+    'CHECK',
+    'COLLATE',
+    'COLUMN',
+    'CONDITION',
+    'CONSTRAINT',
+    'CONTINUE',
+    'CONVERT',
+    'CREATE',
+    'CROSS',
+    'CURRENT_DATE',
+    'CURRENT_TIME',
+    'CURRENT_TIMESTAMP',
+    'CURRENT_USER',
+    'CURSOR',
+    'DATABASE',
+    'DATABASES',
+    'DAY_HOUR',
+    'DAY_MICROSECOND',
+    'DAY_MINUTE',
+    'DAY_SECOND',
+    'DEC',
+    'DECIMAL',
+    'DECLARE',
+    'DEFAULT',
+    'DELAYED',
+    'DELETE',
+    'DESC',
+    'DESCRIBE',
+    'DETERMINISTIC',
+    'DISTINCT',
+    'DISTINCTROW',
+    'DIV',
+    'DOUBLE',
+    'DROP',
+    'DUAL',
+    'EACH',
+    'ELSE',
+    'ELSEIF',
+    'ENCLOSED',
+    'ESCAPED',
+    'EXISTS',
+    'EXIT',
+    'EXPLAIN',
+    'FALSE',
+    'FETCH',
+    'FLOAT',
+    'FLOAT4',
+    'FLOAT8',
+    'FOR',
+    'FORCE',
+    'FOREIGN',
+    'FROM',
+    'FULLTEXT',
+    'GRANT',
+    'GROUP',
+    'HAVING',
+    'HIGH_PRIORITY',
+    'HOUR_MICROSECOND',
+    'HOUR_MINUTE',
+    'HOUR_SECOND',
+    'IF',
+    'IGNORE',
+    'IGNORE_SERVER_IDS',
+    'IGNORE_SERVER_IDS',
+    'IN',
+    'INDEX',
+    'INFILE',
+    'INNER',
+    'INOUT',
+    'INSENSITIVE',
+    'INSERT',
+    'INT',
+    'INT1',
+    'INT2',
+    'INT3',
+    'INT4',
+    'INT8',
+    'INTEGER',
+    'INTERVAL',
+    'INTO',
+    'IS',
+    'ITERATE',
+    'JOIN',
+    'KEY',
+    'KEYS',
+    'KILL',
+    'LEADING',
+    'LEAVE',
+    'LEFT',
+    'LIKE',
+    'LIMIT',
+    'LINEAR',
+    'LINES',
+    'LOAD',
+    'LOCALTIME',
+    'LOCALTIMESTAMP',
+    'LOCK',
+    'LONG',
+    'LONGBLOB',
+    'LONGTEXT',
+    'LOOP',
+    'LOW_PRIORITY',
+    'MASTER_HEARTBEAT_PERIOD',
+    'MASTER_HEARTBEAT_PERIOD',
+    'MASTER_SSL_VERIFY_SERVER_CERT',
+    'MATCH',
+    'MAXVALUE',
+    'MAXVALUE',
+    'MEDIUMBLOB',
+    'MEDIUMINT',
+    'MEDIUMTEXT',
+    'MIDDLEINT',
+    'MINUTE_MICROSECOND',
+    'MINUTE_SECOND',
+    'MOD',
+    'MODIFIES',
+    'NATURAL',
+    'NO_WRITE_TO_BINLOG',
+    'NOT',
+    'NULL',
+    'NUMERIC',
+    'ON',
+    'OPTIMIZE',
+    'OPTION',
+    'OPTIONALLY',
+    'OR',
+    'ORDER',
+    'OUT',
+    'OUTER',
+    'OUTFILE',
+    'PRECISION',
+    'PRIMARY',
+    'PROCEDURE',
+    'PURGE',
+    'RANGE',
+    'READ',
+    'READ_WRITE',
+    'READS',
+    'REAL',
+    'REFERENCES',
+    'REGEXP',
+    'RELEASE',
+    'RENAME',
+    'REPEAT',
+    'REPLACE',
+    'REQUIRE',
+    'RESIGNAL',
+    'RESIGNAL',
+    'RESTRICT',
+    'RETURN',
+    'REVOKE',
+    'RIGHT',
+    'RLIKE',
+    'SCHEMA',
+    'SCHEMAS',
+    'SECOND_MICROSECOND',
+    'SELECT',
+    'SENSITIVE',
+    'SEPARATOR',
+    'SET',
+    'SHOW',
+    'SIGNAL',
+    'SIGNAL',
+    'SMALLINT',
+    'SPATIAL',
+    'SPECIFIC',
+    'SQL',
+    'SQL_BIG_RESULT',
+    'SQL_CALC_FOUND_ROWS',
+    'SQL_SMALL_RESULT',
+    'SQLEXCEPTION',
+    'SQLSTATE',
+    'SQLWARNING',
+    'SSL',
+    'STARTING',
+    'STRAIGHT_JOIN',
+    'TABLE',
+    'TERMINATED',
+    'THEN',
+    'TINYBLOB',
+    'TINYINT',
+    'TINYTEXT',
+    'TO',
+    'TRAILING',
+    'TRIGGER',
+    'TRUE',
+    'UNDO',
+    'UNION',
+    'UNIQUE',
+    'UNLOCK',
+    'UNSIGNED',
+    'UPDATE',
+    'USAGE',
+    'USE',
+    'USING',
+    'UTC_DATE',
+    'UTC_TIME',
+    'UTC_TIMESTAMP',
+    'VALUES',
+    'VARBINARY',
+    'VARCHAR',
+    'VARCHARACTER',
+    'VARYING',
+    'WHEN',
+    'WHERE',
+    'WHILE',
+    'WITH',
+    'WRITE',
+    'XOR',
+    'YEAR_MONTH',
+    'ZEROFILL',
+))
+
+MSSQL = set((
+    'ADD',
+    'ALL',
+    'ALTER',
+    'AND',
+    'ANY',
+    'AS',
+    'ASC',
+    'AUTHORIZATION',
+    'BACKUP',
+    'BEGIN',
+    'BETWEEN',
+    'BREAK',
+    'BROWSE',
+    'BULK',
+    'BY',
+    'CASCADE',
+    'CASE',
+    'CHECK',
+    'CHECKPOINT',
+    'CLOSE',
+    'CLUSTERED',
+    'COALESCE',
+    'COLLATE',
+    'COLUMN',
+    'COMMIT',
+    'COMPUTE',
+    'CONSTRAINT',
+    'CONTAINS',
+    'CONTAINSTABLE',
+    'CONTINUE',
+    'CONVERT',
+    'CREATE',
+    'CROSS',
+    'CURRENT',
+    'CURRENT_DATE',
+    'CURRENT_TIME',
+    'CURRENT_TIMESTAMP',
+    'CURRENT_USER',
+    'CURSOR',
+    'DATABASE',
+    'DBCC',
+    'DEALLOCATE',
+    'DECLARE',
+    'DEFAULT',
+    'DELETE',
+    'DENY',
+    'DESC',
+    'DISK',
+    'DISTINCT',
+    'DISTRIBUTED',
+    'DOUBLE',
+    'DROP',
+    'DUMMY',
+    'DUMP',
+    'ELSE',
+    'END',
+    'ERRLVL',
+    'ESCAPE',
+    'EXCEPT',
+    'EXEC',
+    'EXECUTE',
+    'EXISTS',
+    'EXIT',
+    'FETCH',
+    'FILE',
+    'FILLFACTOR',
+    'FOR',
+    'FOREIGN',
+    'FREETEXT',
+    'FREETEXTTABLE',
+    'FROM',
+    'FULL',
+    'FUNCTION',
+    'GOTO',
+    'GRANT',
+    'GROUP',
+    'HAVING',
+    'HOLDLOCK',
+    'IDENTITY',
+    'IDENTITY_INSERT',
+    'IDENTITYCOL',
+    'IF',
+    'IN',
+    'INDEX',
+    'INNER',
+    'INSERT',
+    'INTERSECT',
+    'INTO',
+    'IS',
+    'JOIN',
+    'KEY',
+    'KILL',
+    'LEFT',
+    'LIKE',
+    'LINENO',
+    'LOAD',
+    'NATIONAL ',
+    'NOCHECK',
+    'NONCLUSTERED',
+    'NOT',
+    'NULL',
+    'NULLIF',
+    'OF',
+    'OFF',
+    'OFFSETS',
+    'ON',
+    'OPEN',
+    'OPENDATASOURCE',
+    'OPENQUERY',
+    'OPENROWSET',
+    'OPENXML',
+    'OPTION',
+    'OR',
+    'ORDER',
+    'OUTER',
+    'OVER',
+    'PERCENT',
+    'PLAN',
+    'PRECISION',
+    'PRIMARY',
+    'PRINT',
+    'PROC',
+    'PROCEDURE',
+    'PUBLIC',
+    'RAISERROR',
+    'READ',
+    'READTEXT',
+    'RECONFIGURE',
+    'REFERENCES',
+    'REPLICATION',
+    'RESTORE',
+    'RESTRICT',
+    'RETURN',
+    'REVOKE',
+    'RIGHT',
+    'ROLLBACK',
+    'ROWCOUNT',
+    'ROWGUIDCOL',
+    'RULE',
+    'SAVE',
+    'SCHEMA',
+    'SELECT',
+    'SESSION_USER',
+    'SET',
+    'SETUSER',
+    'SHUTDOWN',
+    'SOME',
+    'STATISTICS',
+    'SYSTEM_USER',
+    'TABLE',
+    'TEXTSIZE',
+    'THEN',
+    'TO',
+    'TOP',
+    'TRAN',
+    'TRANSACTION',
+    'TRIGGER',
+    'TRUNCATE',
+    'TSEQUAL',
+    'UNION',
+    'UNIQUE',
+    'UPDATE',
+    'UPDATETEXT',
+    'USE',
+    'USER',
+    'VALUES',
+    'VARYING',
+    'VIEW',
+    'WAITFOR',
+    'WHEN',
+    'WHERE',
+    'WHILE',
+    'WITH',
+    'WRITETEXT',
+))
+
+ORACLE = set((
+    'ACCESS',
+    'ADD',
+    'ALL',
+    'ALTER',
+    'AND',
+    'ANY',
+    'AS',
+    'ASC',
+    'AUDIT',
+    'BETWEEN',
+    'BY',
+    'CHAR',
+    'CHECK',
+    'CLUSTER',
+    'COLUMN',
+    'COMMENT',
+    'COMPRESS',
+    'CONNECT',
+    'CREATE',
+    'CURRENT',
+    'DATE',
+    'DECIMAL',
+    'DEFAULT',
+    'DELETE',
+    'DESC',
+    'DISTINCT',
+    'DROP',
+    'ELSE',
+    'EXCLUSIVE',
+    'EXISTS',
+    'FILE',
+    'FLOAT',
+    'FOR',
+    'FROM',
+    'GRANT',
+    'GROUP',
+    'HAVING',
+    'IDENTIFIED',
+    'IMMEDIATE',
+    'IN',
+    'INCREMENT',
+    'INDEX',
+    'INITIAL',
+    'INSERT',
+    'INTEGER',
+    'INTERSECT',
+    'INTO',
+    'IS',
+    'LEVEL',
+    'LIKE',
+    'LOCK',
+    'LONG',
+    'MAXEXTENTS',
+    'MINUS',
+    'MLSLABEL',
+    'MODE',
+    'MODIFY',
+    'NOAUDIT',
+    'NOCOMPRESS',
+    'NOT',
+    'NOWAIT',
+    'NULL',
+    'NUMBER',
+    'OF',
+    'OFFLINE',
+    'ON',
+    'ONLINE',
+    'OPTION',
+    'OR',
+    'ORDER',
+    'PCTFREE',
+    'PRIOR',
+    'PRIVILEGES',
+    'PUBLIC',
+    'RAW',
+    'RENAME',
+    'RESOURCE',
+    'REVOKE',
+    'ROW',
+    'ROWID',
+    'ROWNUM',
+    'ROWS',
+    'SELECT',
+    'SESSION',
+    'SET',
+    'SHARE',
+    'SIZE',
+    'SMALLINT',
+    'START',
+    'SUCCESSFUL',
+    'SYNONYM',
+    'SYSDATE',
+    'TABLE',
+    'THEN',
+    'TO',
+    'TRIGGER',
+    'UID',
+    'UNION',
+    'UNIQUE',
+    'UPDATE',
+    'USER',
+    'VALIDATE',
+    'VALUES',
+    'VARCHAR',
+    'VARCHAR2',
+    'VIEW',
+    'WHENEVER',
+    'WHERE',
+    'WITH',
+))
+
+SQLITE = set((
+    'ABORT',
+    'ACTION',
+    'ADD',
+    'AFTER',
+    'ALL',
+    'ALTER',
+    'ANALYZE',
+    'AND',
+    'AS',
+    'ASC',
+    'ATTACH',
+    'AUTOINCREMENT',
+    'BEFORE',
+    'BEGIN',
+    'BETWEEN',
+    'BY',
+    'CASCADE',
+    'CASE',
+    'CAST',
+    'CHECK',
+    'COLLATE',
+    'COLUMN',
+    'COMMIT',
+    'CONFLICT',
+    'CONSTRAINT',
+    'CREATE',
+    'CROSS',
+    'CURRENT_DATE',
+    'CURRENT_TIME',
+    'CURRENT_TIMESTAMP',
+    'DATABASE',
+    'DEFAULT',
+    'DEFERRABLE',
+    'DEFERRED',
+    'DELETE',
+    'DESC',
+    'DETACH',
+    'DISTINCT',
+    'DROP',
+    'EACH',
+    'ELSE',
+    'END',
+    'ESCAPE',
+    'EXCEPT',
+    'EXCLUSIVE',
+    'EXISTS',
+    'EXPLAIN',
+    'FAIL',
+    'FOR',
+    'FOREIGN',
+    'FROM',
+    'FULL',
+    'GLOB',
+    'GROUP',
+    'HAVING',
+    'IF',
+    'IGNORE',
+    'IMMEDIATE',
+    'IN',
+    'INDEX',
+    'INDEXED',
+    'INITIALLY',
+    'INNER',
+    'INSERT',
+    'INSTEAD',
+    'INTERSECT',
+    'INTO',
+    'IS',
+    'ISNULL',
+    'JOIN',
+    'KEY',
+    'LEFT',
+    'LIKE',
+    'LIMIT',
+    'MATCH',
+    'NATURAL',
+    'NO',
+    'NOT',
+    'NOTNULL',
+    'NULL',
+    'OF',
+    'OFFSET',
+    'ON',
+    'OR',
+    'ORDER',
+    'OUTER',
+    'PLAN',
+    'PRAGMA',
+    'PRIMARY',
+    'QUERY',
+    'RAISE',
+    'REFERENCES',
+    'REGEXP',
+    'REINDEX',
+    'RELEASE',
+    'RENAME',
+    'REPLACE',
+    'RESTRICT',
+    'RIGHT',
+    'ROLLBACK',
+    'ROW',
+    'SAVEPOINT',
+    'SELECT',
+    'SET',
+    'TABLE',
+    'TEMP',
+    'TEMPORARY',
+    'THEN',
+    'TO',
+    'TRANSACTION',
+    'TRIGGER',
+    'UNION',
+    'UNIQUE',
+    'UPDATE',
+    'USING',
+    'VACUUM',
+    'VALUES',
+    'VIEW',
+    'VIRTUAL',
+    'WHEN',
+    'WHERE',
+))
+
+# remove from here when you add a list.
+JDBCSQLITE = SQLITE
+DB2 = INFORMIX = INGRES = JDBCPOSTGRESQL = COMMON
+
+ADAPTERS = {
+    'sqlite': SQLITE,
+    'mysql': MYSQL,
+    'postgres': POSTGRESQL,
+    'postgres_nonreserved': POSTGRESQL_NONRESERVED,
+    'oracle': ORACLE,
+    'mssql': MSSQL,
+    'mssql2': MSSQL,
+    'db2': DB2,
+    'informix': INFORMIX,
+    'firebird': FIREBIRD,
+    'firebird_embedded': FIREBIRD,
+    'firebird_nonreserved': FIREBIRD_NONRESERVED,
+    'ingres': INGRES,
+    'ingresu': INGRES,
+    'jdbc:sqlite': JDBCSQLITE,
+    'jdbc:postgres': JDBCPOSTGRESQL,
+    'common': COMMON,
+}
+
+ADAPTERS['all'] = reduce(lambda a,b:a.union(b),(x for x in ADAPTERS.values()))
+

ADDED   gluon/restricted.py
Index: gluon/restricted.py
==================================================================
--- /dev/null
+++ gluon/restricted.py
@@ -0,0 +1,286 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+"""
+
+import sys
+import cPickle
+import traceback
+import types
+import os
+import datetime
+import logging
+
+from utils import web2py_uuid
+from storage import Storage
+from http import HTTP
+from html import BEAUTIFY
+
+logger = logging.getLogger("web2py")
+
+__all__ = ['RestrictedError', 'restricted', 'TicketStorage', 'compile2']
+
+class TicketStorage(Storage):
+
+    """
+    defines the ticket object and the default values of its members (None)
+    """
+
+    def __init__(
+        self,
+        db=None,
+        tablename='web2py_ticket'
+        ):
+        self.db = db
+        self.tablename = tablename
+
+    def store(self, request, ticket_id, ticket_data):
+        """
+        stores the ticket. It will figure out if this must be on disk or in db
+        """
+        if self.db:
+            self._store_in_db(request, ticket_id, ticket_data)
+        else:
+            self._store_on_disk(request, ticket_id, ticket_data)
+
+    def _store_in_db(self, request, ticket_id, ticket_data):
+        table = self._get_table(self.db, self.tablename, request.application)
+        table.insert(ticket_id=ticket_id,
+                     ticket_data=cPickle.dumps(ticket_data),
+                     created_datetime=request.now)
+        logger.error('In FILE: %(layer)s\n\n%(traceback)s\n' % ticket_data)
+
+    def _store_on_disk(self, request, ticket_id, ticket_data):
+        ef = self._error_file(request, ticket_id, 'wb')
+        try:
+            cPickle.dump(ticket_data, ef)
+        finally:
+            ef.close()
+
+    def _error_file(self, request, ticket_id, mode, app=None):
+        root = request.folder
+        if app:
+            root = os.path.join(os.path.join(root, '..'), app)
+        errors_folder = os.path.abspath(os.path.join(root, 'errors'))#.replace('\\', '/')
+        return open(os.path.join(errors_folder, ticket_id), mode)
+
+    def _get_table(self, db, tablename, app):
+        tablename = tablename + '_' + app
+        table = db.get(tablename, None)
+        if table is None:
+            db.rollback()   # not necessary but one day
+                            # any app may store tickets on DB
+            table = db.define_table(
+                tablename,
+                db.Field('ticket_id', length=100),
+                db.Field('ticket_data', 'text'),
+                db.Field('created_datetime', 'datetime'),
+                )
+        return table
+
+    def load(
+        self,
+        request,
+        app,
+        ticket_id,
+        ):
+        if not self.db:
+            ef = self._error_file(request, ticket_id, 'rb', app)
+            try:
+                return cPickle.load(ef)
+            finally:
+                ef.close()
+        table = self._get_table(self.db, self.tablename, app)
+        rows = self.db(table.ticket_id == ticket_id).select()
+        if rows:
+            return cPickle.loads(rows[0].ticket_data)
+        return None
+
+
+class RestrictedError(Exception):
+    """
+    class used to wrap an exception that occurs in the restricted environment
+    below. the traceback is used to log the exception and generate a ticket.
+    """
+
+    def __init__(
+        self,
+        layer='',
+        code='',
+        output='',
+        environment={},
+        ):
+        """
+        layer here is some description of where in the system the exception
+        occurred.
+        """
+
+        self.layer = layer
+        self.code = code
+        self.output = output
+        if layer:
+            try:
+                self.traceback = traceback.format_exc()
+            except:
+                self.traceback = 'no traceback because template parting error'
+            try:
+                self.snapshot = snapshot(context=10,code=code,environment=environment)
+            except:
+                self.snapshot = {}
+        else:
+            self.traceback = '(no error)'
+            self.snapshot = {}
+        self.environment = environment
+
+    def log(self, request):
+        """
+        logs the exception.
+        """
+
+        try:
+            d = {
+                'layer': str(self.layer),
+                'code': str(self.code),
+                'output': str(self.output),
+                'traceback': str(self.traceback),
+                'snapshot': self.snapshot,
+                }
+            ticket_storage = TicketStorage(db=request.tickets_db)
+            ticket_storage.store(request, request.uuid.split('/',1)[1], d)
+            return request.uuid
+        except:
+            logger.error(self.traceback)
+            return None
+
+
+    def load(self, request, app, ticket_id):
+        """
+        loads a logged exception.
+        """
+        ticket_storage = TicketStorage(db=request.tickets_db)
+        d = ticket_storage.load(request, app, ticket_id)
+
+        self.layer = d['layer']
+        self.code = d['code']
+        self.output = d['output']
+        self.traceback = d['traceback']
+        self.snapshot = d.get('snapshot')
+
+
+def compile2(code,layer):
+    """
+    The +'\n' is necessary else compile fails when code ends in a comment.
+    """
+    return compile(code.rstrip().replace('\r\n','\n')+'\n', layer, 'exec')
+
+def restricted(code, environment={}, layer='Unknown'):
+    """
+    runs code in environment and returns the output. if an exception occurs
+    in code it raises a RestrictedError containing the traceback. layer is
+    passed to RestrictedError to identify where the error occurred.
+    """
+    environment['__file__'] = layer
+    try:
+        if type(code) == types.CodeType:
+            ccode = code
+        else:
+            ccode = compile2(code,layer)
+        exec ccode in environment
+    except HTTP:
+        raise
+    except Exception, error:
+        # XXX Show exception in Wing IDE if running in debugger
+        if __debug__ and 'WINGDB_ACTIVE' in os.environ:
+            etype, evalue, tb = sys.exc_info()
+            sys.excepthook(etype, evalue, tb)
+        raise RestrictedError(layer, code, '', environment)
+
+def snapshot(info=None, context=5, code=None, environment=None):
+    """Return a dict describing a given traceback (based on cgitb.text)."""
+    import os, types, time, traceback, linecache, inspect, pydoc, cgitb
+
+    # if no exception info given, get current:
+    etype, evalue, etb = info or sys.exc_info()
+
+    if type(etype) is types.ClassType:
+        etype = etype.__name__
+
+    # create a snapshot dict with some basic information
+    s = {}
+    s['pyver'] = 'Python ' + sys.version.split()[0] + ': ' + sys.executable
+    s['date'] = time.ctime(time.time())
+
+    # start to process frames
+    records = inspect.getinnerframes(etb, context)
+    s['frames'] = []
+    for frame, file, lnum, func, lines, index in records:
+        file = file and os.path.abspath(file) or '?'
+        args, varargs, varkw, locals = inspect.getargvalues(frame)
+        call = ''
+        if func != '?':
+            call = inspect.formatargvalues(args, varargs, varkw, locals,
+                    formatvalue=lambda value: '=' + pydoc.text.repr(value))
+
+        # basic frame information
+        f = {'file': file, 'func': func, 'call': call, 'lines': {}, 'lnum': lnum}
+
+        highlight = {}
+        def reader(lnum=[lnum]):
+            highlight[lnum[0]] = 1
+            try: return linecache.getline(file, lnum[0])
+            finally: lnum[0] += 1
+        vars = cgitb.scanvars(reader, frame, locals)
+
+        # if it is a view, replace with generated code
+        if file.endswith('html'):
+            lmin = lnum>context and (lnum-context) or 0
+            lmax = lnum+context
+            lines = code.split("\n")[lmin:lmax]
+            index = min(context, lnum) - 1
+
+        if index is not None:
+            i = lnum - index
+            for line in lines:
+                f['lines'][i] = line.rstrip()
+                i += 1
+
+        # dump local variables (referenced in current line only)
+        f['dump'] = {}
+        for name, where, value in vars:
+            if name in f['dump']: continue
+            if value is not cgitb.__UNDEF__:
+                if where == 'global': name = 'global ' + name
+                elif where != 'local': name = where + name.split('.')[-1]
+                f['dump'][name] = pydoc.text.repr(value)
+            else:
+                f['dump'][name] = 'undefined'
+
+        s['frames'].append(f)
+
+    # add exception type, value and attributes
+    s['etype'] = str(etype)
+    s['evalue'] = str(evalue)
+    s['exception'] = {}
+    if isinstance(evalue, BaseException):
+        for name in dir(evalue):
+            # prevent py26 DeprecatedWarning:
+            if name!='message' or sys.version_info<(2.6):
+                value = pydoc.text.repr(getattr(evalue, name))
+                s['exception'][name] = value
+
+    # add all local values (of last frame) to the snapshot
+    s['locals'] = {}
+    for name, value in locals.items():
+        s['locals'][name] = pydoc.text.repr(value)
+
+    # add web2py environment variables
+    for k,v in environment.items():
+        if k in ('request', 'response', 'session'):
+            s[k] = BEAUTIFY(v)
+
+    return s
+

ADDED   gluon/rewrite.py
Index: gluon/rewrite.py
==================================================================
--- /dev/null
+++ gluon/rewrite.py
@@ -0,0 +1,1220 @@
+#!/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+gluon.rewrite parses incoming URLs and formats outgoing URLs for gluon.html.URL.
+
+In addition, it rewrites both incoming and outgoing URLs based on the (optional) user-supplied routes.py,
+which also allows for rewriting of certain error messages.
+
+routes.py supports two styles of URL rewriting, depending on whether 'routers' is defined.
+Refer to router.example.py and routes.example.py for additional documentation.
+
+"""
+
+import os
+import re
+import logging
+import traceback
+import threading
+import urllib
+from storage import Storage, List
+from http import HTTP
+from fileutils import abspath, read_file
+from settings import global_settings
+
+logger = logging.getLogger('web2py.rewrite')
+
+thread = threading.local()  # thread-local storage for routing parameters
+
+def _router_default():
+    "return new copy of default base router"
+    router = Storage(
+        default_application = 'init',
+            applications = 'ALL',
+        default_controller = 'default',
+            controllers = 'DEFAULT',
+        default_function = 'index',
+            functions = None,
+        default_language = None,
+            languages = None,
+        root_static = ['favicon.ico', 'robots.txt'],
+        domains = None,
+        exclusive_domain = False,
+        map_hyphen = False,
+        acfe_match = r'\w+$',              # legal app/ctlr/fcn/ext
+        file_match = r'(\w+[-=./]?)+$',    # legal file (path) name
+        args_match = r'([\w@ -]+[=.]?)*$', # legal arg in args
+    )
+    return router
+
+def _params_default(app=None):
+    "return new copy of default parameters"
+    p = Storage()
+    p.name = app or "BASE"
+    p.default_application = app or "init"
+    p.default_controller = "default"
+    p.default_function = "index"
+    p.routes_app = []
+    p.routes_in = []
+    p.routes_out = []
+    p.routes_onerror = []
+    p.routes_apps_raw = []
+    p.error_handler = None
+    p.error_message = '<html><body><h1>%s</h1></body></html>'
+    p.error_message_ticket = \
+        '<html><body><h1>Internal error</h1>Ticket issued: <a href="/admin/default/ticket/%(ticket)s" target="_blank">%(ticket)s</a></body><!-- this is junk text else IE does not display the page: '+('x'*512)+' //--></html>'
+    p.routers = None
+    return p
+
+params_apps = dict()
+params = _params_default(app=None)  # regex rewrite parameters
+thread.routes = params              # default to base regex rewrite parameters
+routers = None
+
+ROUTER_KEYS = set(('default_application', 'applications', 'default_controller', 'controllers',
+    'default_function', 'functions', 'default_language', 'languages',
+    'domain', 'domains', 'root_static', 'path_prefix',
+    'exclusive_domain', 'map_hyphen', 'map_static',
+    'acfe_match', 'file_match', 'args_match'))
+
+ROUTER_BASE_KEYS = set(('applications', 'default_application', 'domains', 'path_prefix'))
+
+#  The external interface to rewrite consists of:
+#
+#  load: load routing configuration file(s)
+#  url_in: parse and rewrite incoming URL
+#  url_out: assemble and rewrite outgoing URL
+#
+#  thread.routes.default_application
+#  thread.routes.error_message
+#  thread.routes.error_message_ticket
+#  thread.routes.try_redirect_on_error
+#  thread.routes.error_handler
+#
+#  filter_url: helper for doctest & unittest
+#  filter_err: helper for doctest & unittest
+#  regex_filter_out: doctest
+
+def url_in(request, environ):
+    "parse and rewrite incoming URL"
+    if routers:
+        return map_url_in(request, environ)
+    return regex_url_in(request, environ)
+
+def url_out(request, env, application, controller, function, args, other, scheme, host, port):
+    "assemble and rewrite outgoing URL"
+    if routers:
+        acf = map_url_out(request, env, application, controller, function, args, other, scheme, host, port)
+        url = '%s%s' % (acf, other)
+    else:
+        url = '/%s/%s/%s%s' % (application, controller, function, other)
+        url = regex_filter_out(url, env)
+    #
+    #  fill in scheme and host if absolute URL is requested
+    #  scheme can be a string, eg 'http', 'https', 'ws', 'wss'
+    #
+    if scheme or port is not None:
+        if host is None:    # scheme or port implies host
+            host = True
+    if not scheme or scheme is True:
+        if request and request.env:
+            scheme = request.env.get('WSGI_URL_SCHEME', 'http').lower()
+        else:
+            scheme = 'http' # some reasonable default in case we need it
+    if host is not None:
+        if host is True:
+            host = request.env.http_host
+    if host:
+        if port is None:
+            port = ''
+        else:
+            port = ':%s' % port
+        url = '%s://%s%s%s' % (scheme, host, port, url)
+    return url
+
+def try_rewrite_on_error(http_response, request, environ, ticket=None):
+    """
+    called from main.wsgibase to rewrite the http response.
+    """
+    status = int(str(http_response.status).split()[0])
+    if status>=399 and thread.routes.routes_onerror:
+        keys=set(('%s/%s' % (request.application, status),
+                  '%s/*' % (request.application),
+                  '*/%s' % (status),
+                  '*/*'))
+        for (key,uri) in thread.routes.routes_onerror:
+            if key in keys:
+                if uri == '!':
+                    # do nothing!
+                    return http_response, environ
+                elif '?' in uri:
+                    path_info, query_string = uri.split('?',1)
+                    query_string += '&'
+                else:
+                    path_info, query_string = uri, ''
+                query_string += \
+                    'code=%s&ticket=%s&requested_uri=%s&request_url=%s' % \
+                    (status,ticket,request.env.request_uri,request.url)
+                if uri.startswith('http://') or uri.startswith('https://'):
+                    # make up a response
+                    url = path_info+'?'+query_string
+                    message = 'You are being redirected <a href="%s">here</a>'
+                    return HTTP(303, message % url, Location=url), environ
+                elif path_info!=environ['PATH_INFO']:
+                    # rewrite request, call wsgibase recursively, avoid loop
+                    environ['PATH_INFO'] = path_info
+                    environ['QUERY_STRING'] = query_string
+                    return None, environ
+    # do nothing!
+    return http_response, environ
+
+def try_redirect_on_error(http_object, request, ticket=None):
+    "called from main.wsgibase to rewrite the http response"
+    status = int(str(http_object.status).split()[0])
+    if status>399 and thread.routes.routes_onerror:
+        keys=set(('%s/%s' % (request.application, status),
+                  '%s/*' % (request.application),
+                  '*/%s' % (status),
+                  '*/*'))
+        for (key,redir) in thread.routes.routes_onerror:
+            if key in keys:
+                if redir == '!':
+                    break
+                elif '?' in redir:
+                    url = '%s&code=%s&ticket=%s&requested_uri=%s&request_url=%s' % \
+                        (redir,status,ticket,request.env.request_uri,request.url)
+                else:
+                    url = '%s?code=%s&ticket=%s&requested_uri=%s&request_url=%s' % \
+                        (redir,status,ticket,request.env.request_uri,request.url)
+                return HTTP(303,
+                            'You are being redirected <a href="%s">here</a>' % url,
+                            Location=url)
+    return http_object
+
+
+def load(routes='routes.py', app=None, data=None, rdict=None):
+    """
+    load: read (if file) and parse routes
+    store results in params
+    (called from main.py at web2py initialization time)
+    If data is present, it's used instead of the routes.py contents.
+    If rdict is present, it must be a dict to be used for routers (unit test)
+    """
+    global params
+    global routers
+    if app is None:
+        # reinitialize
+        global params_apps
+        params_apps = dict()
+        params = _params_default(app=None)  # regex rewrite parameters
+        thread.routes = params              # default to base regex rewrite parameters
+        routers = None
+
+    if isinstance(rdict, dict):
+        symbols = dict(routers=rdict)
+        path = 'rdict'
+    else:
+        if data is not None:
+            path = 'routes'
+        else:
+            if app is None:
+                path = abspath(routes)
+            else:
+                path = abspath('applications', app, routes)
+            if not os.path.exists(path):
+                return
+            data = read_file(path).replace('\r\n','\n')
+
+        symbols = {}
+        try:
+            exec (data + '\n') in symbols
+        except SyntaxError, e:
+            logger.error(
+                '%s has a syntax error and will not be loaded\n' % path
+                + traceback.format_exc())
+            raise e
+
+    p = _params_default(app)
+
+    for sym in ('routes_app', 'routes_in', 'routes_out'):
+        if sym in symbols:
+            for (k, v) in symbols[sym]:
+                p[sym].append(compile_regex(k, v))
+    for sym in ('routes_onerror', 'routes_apps_raw',
+                'error_handler','error_message', 'error_message_ticket',
+                'default_application','default_controller', 'default_function'):
+        if sym in symbols:
+            p[sym] = symbols[sym]
+    if 'routers' in symbols:
+        p.routers = Storage(symbols['routers'])
+        for key in p.routers:
+            if isinstance(p.routers[key], dict):
+                p.routers[key] = Storage(p.routers[key])
+
+    if app is None:
+        params = p                  # install base rewrite parameters
+        thread.routes = params      # install default as current routes
+        #
+        #  create the BASE router if routers in use
+        #
+        routers = params.routers    # establish routers if present
+        if isinstance(routers, dict):
+            routers = Storage(routers)
+        if routers is not None:
+            router = _router_default()
+            if routers.BASE:
+                router.update(routers.BASE)
+            routers.BASE = router
+
+        #  scan each app in applications/
+        #    create a router, if routers are in use
+        #    parse the app-specific routes.py if present
+        #
+        all_apps = []
+        for appname in [app for app in os.listdir(abspath('applications')) if not app.startswith('.')]:
+            if os.path.isdir(abspath('applications', appname)) and \
+               os.path.isdir(abspath('applications', appname, 'controllers')):
+                all_apps.append(appname)
+                if routers:
+                    router = Storage(routers.BASE)   # new copy
+                    if appname in routers:
+                        for key in routers[appname].keys():
+                            if key in ROUTER_BASE_KEYS:
+                                raise SyntaxError, "BASE-only key '%s' in router '%s'" % (key, appname)
+                        router.update(routers[appname])
+                    routers[appname] = router
+                if os.path.exists(abspath('applications', appname, routes)):
+                    load(routes, appname)
+
+        if routers:
+            load_routers(all_apps)
+
+    else: # app
+        params_apps[app] = p
+        if routers and p.routers:
+            if app in p.routers:
+                routers[app].update(p.routers[app])
+
+    logger.debug('URL rewrite is on. configuration in %s' % path)
+
+
+regex_at = re.compile(r'(?<!\\)\$[a-zA-Z]\w*')
+regex_anything = re.compile(r'(?<!\\)\$anything')
+
+def compile_regex(k, v):
+    """
+    Preprocess and compile the regular expressions in routes_app/in/out
+
+    The resulting regex will match a pattern of the form:
+
+        [remote address]:[protocol]://[host]:[method] [path]
+
+    We allow abbreviated regexes on input; here we try to complete them.
+    """
+    k0 = k  # original k for error reporting
+    # bracket regex in ^...$ if not already done
+    if not k[0] == '^':
+        k = '^%s' % k
+    if not k[-1] == '$':
+        k = '%s$' % k
+    # if there are no :-separated parts, prepend a catch-all for the IP address
+    if k.find(':') < 0:
+        # k = '^.*?:%s' % k[1:]
+        k = '^.*?:https?://[^:/]+:[a-z]+ %s' % k[1:]
+    # if there's no ://, provide a catch-all for the protocol, host & method
+    if k.find('://') < 0:
+        i = k.find(':/')
+        if i < 0:
+            raise SyntaxError, "routes pattern syntax error: path needs leading '/' [%s]" % k0
+        k = r'%s:https?://[^:/]+:[a-z]+ %s' % (k[:i], k[i+1:])
+    # $anything -> ?P<anything>.*
+    for item in regex_anything.findall(k):
+        k = k.replace(item, '(?P<anything>.*)')
+    # $a (etc) -> ?P<a>\w+
+    for item in regex_at.findall(k):
+        k = k.replace(item, r'(?P<%s>\w+)' % item[1:])
+    # same for replacement pattern, but with \g
+    for item in regex_at.findall(v):
+        v = v.replace(item, r'\g<%s>' % item[1:])
+    return (re.compile(k, re.DOTALL), v)
+
+def load_routers(all_apps):
+    "load-time post-processing of routers"
+
+    for app in routers.keys():
+        # initialize apps with routers that aren't present, on behalf of unit tests
+        if app not in all_apps:
+            all_apps.append(app)
+            router = Storage(routers.BASE)   # new copy
+            if app != 'BASE':
+                for key in routers[app].keys():
+                    if key in ROUTER_BASE_KEYS:
+                        raise SyntaxError, "BASE-only key '%s' in router '%s'" % (key, app)
+            router.update(routers[app])
+            routers[app] = router
+        router = routers[app]
+        for key in router.keys():
+            if key not in ROUTER_KEYS:
+                raise SyntaxError, "unknown key '%s' in router '%s'" % (key, app)
+        if not router.controllers:
+            router.controllers = set()
+        elif not isinstance(router.controllers, str):
+            router.controllers = set(router.controllers)
+        if router.functions:
+            router.functions = set(router.functions)
+        else:
+            router.functions = set()
+        if router.languages:
+            router.languages = set(router.languages)
+        else:
+            router.languages = set()
+        if app != 'BASE':
+            for base_only in ROUTER_BASE_KEYS:
+                router.pop(base_only, None)
+            if 'domain' in router:
+                routers.BASE.domains[router.domain] = app
+            if isinstance(router.controllers, str) and router.controllers == 'DEFAULT':
+                router.controllers = set()
+                if os.path.isdir(abspath('applications', app)):
+                    cpath = abspath('applications', app, 'controllers')
+                    for cname in os.listdir(cpath):
+                        if os.path.isfile(abspath(cpath, cname)) and cname.endswith('.py'):
+                            router.controllers.add(cname[:-3])
+            if router.controllers:
+                router.controllers.add('static')
+                router.controllers.add(router.default_controller)
+            if router.functions:
+                router.functions.add(router.default_function)
+
+    if isinstance(routers.BASE.applications, str) and routers.BASE.applications == 'ALL':
+        routers.BASE.applications = list(all_apps)
+    if routers.BASE.applications:
+        routers.BASE.applications = set(routers.BASE.applications)
+    else:
+        routers.BASE.applications = set()
+
+    for app in routers.keys():
+        # set router name
+        router = routers[app]
+        router.name = app
+        # compile URL validation patterns
+        router._acfe_match = re.compile(router.acfe_match)
+        router._file_match = re.compile(router.file_match)
+        if router.args_match:
+            router._args_match = re.compile(router.args_match)
+        # convert path_prefix to a list of path elements
+        if router.path_prefix:
+            if isinstance(router.path_prefix, str):
+                router.path_prefix = router.path_prefix.strip('/').split('/')
+
+    #  rewrite BASE.domains as tuples
+    #
+    #      key:   'domain[:port]' -> (domain, port)
+    #      value: 'application[/controller] -> (application, controller)
+    #      (port and controller may be None)
+    #
+    domains = dict()
+    if routers.BASE.domains:
+        for (domain, app) in [(d.strip(':'), a.strip('/')) for (d, a) in routers.BASE.domains.items()]:
+            port = None
+            if ':' in domain:
+                (domain, port) = domain.split(':')
+            ctlr = None
+            if '/' in app:
+                (app, ctlr) = app.split('/')
+            if app not in all_apps and app not in routers:
+                raise SyntaxError, "unknown app '%s' in domains" % app
+            domains[(domain, port)] = (app, ctlr)
+    routers.BASE.domains = domains
+
+def regex_uri(e, regexes, tag, default=None):
+    "filter incoming URI against a list of regexes"
+    path = e['PATH_INFO']
+    host = e.get('HTTP_HOST', 'localhost').lower()
+    i = host.find(':')
+    if i > 0:
+        host = host[:i]
+    key = '%s:%s://%s:%s %s' % \
+        (e.get('REMOTE_ADDR','localhost'),
+         e.get('WSGI_URL_SCHEME', 'http').lower(), host,
+         e.get('REQUEST_METHOD', 'get').lower(), path)
+    for (regex, value) in regexes:
+        if regex.match(key):
+            rewritten = regex.sub(value, key)
+            logger.debug('%s: [%s] [%s] -> %s' % (tag, key, value, rewritten))
+            return rewritten
+    logger.debug('%s: [%s] -> %s (not rewritten)' % (tag, key, default))
+    return default
+
+def regex_select(env=None, app=None, request=None):
+    """
+    select a set of regex rewrite params for the current request
+    """
+    if app:
+        thread.routes = params_apps.get(app, params)
+    elif env and params.routes_app:
+        if routers:
+            map_url_in(request, env, app=True)
+        else:
+            app = regex_uri(env, params.routes_app, "routes_app")
+            thread.routes = params_apps.get(app, params)
+    else:
+        thread.routes = params # default to base rewrite parameters
+    logger.debug("select routing parameters: %s" % thread.routes.name)
+    return app  # for doctest
+
+def regex_filter_in(e):
+    "regex rewrite incoming URL"
+    query = e.get('QUERY_STRING', None)
+    e['WEB2PY_ORIGINAL_URI'] = e['PATH_INFO'] + (query and ('?' + query) or '')
+    if thread.routes.routes_in:
+        path = regex_uri(e, thread.routes.routes_in, "routes_in", e['PATH_INFO'])
+        items = path.split('?', 1)
+        e['PATH_INFO'] = items[0]
+        if len(items) > 1:
+            if query:
+                query = items[1] + '&' + query
+            else:
+                query = items[1]
+            e['QUERY_STRING'] = query
+    e['REQUEST_URI'] = e['PATH_INFO'] + (query and ('?' + query) or '')
+    return e
+
+
+# pattern to replace spaces with underscore in URL
+#   also the html escaped variants '+' and '%20' are covered
+regex_space = re.compile('(\+|\s|%20)+')
+
+# pattern to find valid paths in url /application/controller/...
+#   this could be:
+#     for static pages:
+#        /<b:application>/static/<x:file>
+#     for dynamic pages:
+#        /<a:application>[/<c:controller>[/<f:function>[.<e:ext>][/<s:args>]]]
+#   application, controller, function and ext may only contain [a-zA-Z0-9_]
+#   file and args may also contain '-', '=', '.' and '/'
+#   apps in routes_apps_raw must parse raw_args into args
+
+regex_static = re.compile(r'''
+     (^                              # static pages
+         /(?P<b> \w+)                # b=app
+         /static                     # /b/static
+         /(?P<x> (\w[\-\=\./]?)* )   # x=file
+     $)
+     ''', re.X)
+
+regex_url = re.compile(r'''
+     (^(                                  # (/a/c/f.e/s)
+         /(?P<a> [\w\s+]+ )               # /a=app
+         (                                # (/c.f.e/s)
+             /(?P<c> [\w\s+]+ )           # /a/c=controller
+             (                            # (/f.e/s)
+                 /(?P<f> [\w\s+]+ )       # /a/c/f=function
+                 (                        # (.e)
+                     \.(?P<e> [\w\s+]+ )  # /a/c/f.e=extension
+                 )?
+                 (                        # (/s)
+                     /(?P<r>              # /a/c/f.e/r=raw_args
+                     .*
+                     )
+                 )?
+             )?
+         )?
+     )?
+     /?$)
+     ''', re.X)
+
+regex_args = re.compile(r'''
+     (^
+         (?P<s>
+             ( [\w@/-][=.]? )*          # s=args
+         )?
+     /?$)    # trailing slash
+     ''', re.X)
+
+def regex_url_in(request, environ):
+    "rewrite and parse incoming URL"
+
+    # ##################################################
+    # select application
+    # rewrite URL if routes_in is defined
+    # update request.env
+    # ##################################################
+
+    regex_select(env=environ, request=request)
+
+    if thread.routes.routes_in:
+        environ = regex_filter_in(environ)
+
+    for (key, value) in environ.items():
+        request.env[key.lower().replace('.', '_')] = value
+
+    path = request.env.path_info.replace('\\', '/')
+
+    # ##################################################
+    # serve if a static file
+    # ##################################################
+
+    match = regex_static.match(regex_space.sub('_', path))
+    if match and match.group('x'):
+        static_file = os.path.join(request.env.applications_parent,
+                                   'applications', match.group('b'),
+                                   'static', match.group('x'))
+        return (static_file, environ)
+
+    # ##################################################
+    # parse application, controller and function
+    # ##################################################
+
+    path = re.sub('%20', ' ', path)
+    match = regex_url.match(path)
+    if not match or match.group('c') == 'static':
+        raise HTTP(400,
+                   thread.routes.error_message % 'invalid request',
+                   web2py_error='invalid path')
+
+    request.application = \
+        regex_space.sub('_', match.group('a') or thread.routes.default_application)
+    request.controller = \
+        regex_space.sub('_', match.group('c') or thread.routes.default_controller)
+    request.function = \
+        regex_space.sub('_', match.group('f') or thread.routes.default_function)
+    group_e = match.group('e')
+    request.raw_extension = group_e and regex_space.sub('_', group_e) or None
+    request.extension = request.raw_extension or 'html'
+    request.raw_args = match.group('r')
+    request.args = List([])
+    if request.application in thread.routes.routes_apps_raw:
+        # application is responsible for parsing args
+        request.args = None
+    elif request.raw_args:
+        match = regex_args.match(request.raw_args.replace(' ', '_'))
+        if match:
+            group_s = match.group('s')
+            request.args = \
+                List((group_s and group_s.split('/')) or [])
+            if request.args and request.args[-1] == '':
+                request.args.pop()  # adjust for trailing empty arg
+        else:
+            raise HTTP(400,
+                       thread.routes.error_message % 'invalid request',
+                       web2py_error='invalid path (args)')
+    return (None, environ)
+
+
+def regex_filter_out(url, e=None):
+    "regex rewrite outgoing URL"
+    if not hasattr(thread, 'routes'):
+        regex_select()    # ensure thread.routes is set (for application threads)
+    if routers:
+        return url  # already filtered
+    if thread.routes.routes_out:
+        items = url.split('?', 1)
+        if e:
+            host = e.get('http_host', 'localhost').lower()
+            i = host.find(':')
+            if i > 0:
+                host = host[:i]
+            items[0] = '%s:%s://%s:%s %s' % \
+                 (e.get('remote_addr', ''),
+                  e.get('wsgi_url_scheme', 'http').lower(), host,
+                  e.get('request_method', 'get').lower(), items[0])
+        else:
+            items[0] = ':http://localhost:get %s' % items[0]
+        for (regex, value) in thread.routes.routes_out:
+            if regex.match(items[0]):
+                rewritten = '?'.join([regex.sub(value, items[0])] + items[1:])
+                logger.debug('routes_out: [%s] -> %s' % (url, rewritten))
+                return rewritten
+    logger.debug('routes_out: [%s] not rewritten' % url)
+    return url
+
+
+def filter_url(url, method='get', remote='0.0.0.0', out=False, app=False, lang=None,
+        domain=(None,None), env=False, scheme=None, host=None, port=None):
+    "doctest/unittest interface to regex_filter_in() and regex_filter_out()"
+    regex_url = re.compile(r'^(?P<scheme>http|https|HTTP|HTTPS)\://(?P<host>[^/]*)(?P<uri>.*)')
+    match = regex_url.match(url)
+    urlscheme = match.group('scheme').lower()
+    urlhost = match.group('host').lower()
+    uri = match.group('uri')
+    k = uri.find('?')
+    if k < 0:
+        k = len(uri)
+    (path_info, query_string) = (uri[:k], uri[k+1:])
+    path_info = urllib.unquote(path_info)   # simulate server
+    e = {
+         'REMOTE_ADDR': remote,
+         'REQUEST_METHOD': method,
+         'WSGI_URL_SCHEME': urlscheme,
+         'HTTP_HOST': urlhost,
+         'REQUEST_URI': uri,
+         'PATH_INFO': path_info,
+         'QUERY_STRING': query_string,
+         #for filter_out request.env use lowercase
+         'remote_addr': remote,
+         'request_method': method,
+         'wsgi_url_scheme': urlscheme,
+         'http_host': urlhost
+    }
+
+    request = Storage()
+    e["applications_parent"] = global_settings.applications_parent
+    request.env = Storage(e)
+    request.uri_language = lang
+
+    #  determine application only
+    #
+    if app:
+        if routers:
+            return map_url_in(request, e, app=True)
+        return regex_select(e)
+
+    #  rewrite outbound URL
+    #
+    if out:
+        (request.env.domain_application, request.env.domain_controller) = domain
+        items = path_info.lstrip('/').split('/')
+        if items[-1] == '':
+            items.pop() # adjust trailing empty args
+        assert len(items) >= 3, "at least /a/c/f is required"
+        a = items.pop(0)
+        c = items.pop(0)
+        f = items.pop(0)
+        if not routers:
+            return regex_filter_out(uri, e)
+        acf = map_url_out(request, None, a, c, f, items, None, scheme, host, port)
+        if items:
+            url = '%s/%s' % (acf, '/'.join(items))
+            if items[-1] == '':
+                url += '/'
+        else:
+            url = acf
+        if query_string:
+            url += '?' + query_string
+        return url
+
+    #  rewrite inbound URL
+    #
+    (static, e) = url_in(request, e)
+    if static:
+        return static
+    result = "/%s/%s/%s" % (request.application, request.controller, request.function)
+    if request.extension and request.extension != 'html':
+        result += ".%s" % request.extension
+    if request.args:
+        result += " %s" % request.args
+    if e['QUERY_STRING']:
+        result += " ?%s" % e['QUERY_STRING']
+    if request.uri_language:
+        result += " (%s)" % request.uri_language
+    if env:
+        return request.env
+    return result
+
+
+def filter_err(status, application='app', ticket='tkt'):
+    "doctest/unittest interface to routes_onerror"
+    if status > 399 and thread.routes.routes_onerror:
+        keys = set(('%s/%s' % (application, status),
+                  '%s/*' % (application),
+                  '*/%s' % (status),
+                  '*/*'))
+        for (key,redir) in thread.routes.routes_onerror:
+            if key in keys:
+                if redir == '!':
+                    break
+                elif '?' in redir:
+                    url = redir + '&' + 'code=%s&ticket=%s' % (status,ticket)
+                else:
+                    url = redir + '?' + 'code=%s&ticket=%s' % (status,ticket)
+                return url # redirection
+    return status # no action
+
+#  router support
+#
+class MapUrlIn(object):
+    "logic for mapping incoming URLs"
+
+    def __init__(self, request=None, env=None):
+        "initialize a map-in object"
+        self.request = request
+        self.env = env
+
+        self.router = None
+        self.application = None
+        self.language = None
+        self.controller = None
+        self.function = None
+        self.extension = 'html'
+
+        self.controllers = set()
+        self.functions = set()
+        self.languages = set()
+        self.default_language = None
+        self.map_hyphen = False
+        self.exclusive_domain = False
+
+        path = self.env['PATH_INFO']
+        self.query = self.env.get('QUERY_STRING', None)
+        path = path.lstrip('/')
+        self.env['PATH_INFO'] = '/' + path
+        self.env['WEB2PY_ORIGINAL_URI'] = self.env['PATH_INFO'] + (self.query and ('?' + self.query) or '')
+
+        # to handle empty args, strip exactly one trailing slash, if present
+        # .../arg1// represents one trailing empty arg
+        #
+        if path.endswith('/'):
+            path = path[:-1]
+        self.args = List(path and path.split('/') or [])
+
+        # see http://www.python.org/dev/peps/pep-3333/#url-reconstruction for URL composition
+        self.remote_addr = self.env.get('REMOTE_ADDR','localhost')
+        self.scheme = self.env.get('WSGI_URL_SCHEME', 'http').lower()
+        self.method = self.env.get('REQUEST_METHOD', 'get').lower()
+        self.host = self.env.get('HTTP_HOST')
+        self.port = None
+        if not self.host:
+            self.host = self.env.get('SERVER_NAME')
+            self.port = self.env.get('SERVER_PORT')
+        if not self.host:
+            self.host = 'localhost'
+            self.port = '80'
+        if ':' in self.host:
+            (self.host, self.port) = self.host.split(':')
+        if not self.port:
+            if self.scheme == 'https':
+                self.port = '443'
+            else:
+                self.port = '80'
+
+    def map_prefix(self):
+        "strip path prefix, if present in its entirety"
+        prefix = routers.BASE.path_prefix
+        if prefix:
+            prefixlen = len(prefix)
+            if prefixlen > len(self.args):
+                return
+            for i in xrange(prefixlen):
+                if prefix[i] != self.args[i]:
+                    return  # prefix didn't match
+            self.args = List(self.args[prefixlen:]) # strip the prefix
+
+    def map_app(self):
+        "determine application name"
+        base = routers.BASE  # base router
+        self.domain_application = None
+        self.domain_controller = None
+        arg0 = self.harg0
+        if base.applications and arg0 in base.applications:
+            self.application = arg0
+        elif (self.host, self.port) in base.domains:
+            (self.application, self.domain_controller) = base.domains[(self.host, self.port)]
+            self.env['domain_application'] = self.application
+            self.env['domain_controller'] = self.domain_controller
+        elif (self.host, None) in base.domains:
+            (self.application, self.domain_controller) = base.domains[(self.host, None)]
+            self.env['domain_application'] = self.application
+            self.env['domain_controller'] = self.domain_controller
+        elif arg0 and not base.applications:
+            self.application = arg0
+        else:
+            self.application = base.default_application or ''
+        self.pop_arg_if(self.application == arg0)
+
+        if not base._acfe_match.match(self.application):
+            raise HTTP(400, thread.routes.error_message % 'invalid request',
+                       web2py_error="invalid application: '%s'" % self.application)
+
+        if self.application not in routers and \
+          (self.application != thread.routes.default_application or self.application == 'welcome'):
+            raise HTTP(400, thread.routes.error_message % 'invalid request',
+                web2py_error="unknown application: '%s'" % self.application)
+
+        #  set the application router
+        #
+        logger.debug("select application=%s" % self.application)
+        self.request.application = self.application
+        if self.application not in routers:
+            self.router = routers.BASE                # support gluon.main.wsgibase init->welcome
+        else:
+            self.router = routers[self.application]   # application router
+        self.controllers = self.router.controllers
+        self.default_controller = self.domain_controller or self.router.default_controller
+        self.functions = self.router.functions
+        self.languages = self.router.languages
+        self.default_language = self.router.default_language
+        self.map_hyphen = self.router.map_hyphen
+        self.exclusive_domain = self.router.exclusive_domain
+        self._acfe_match = self.router._acfe_match
+        self._file_match = self.router._file_match
+        self._args_match = self.router._args_match
+
+    def map_root_static(self):
+        '''
+        handle root-static files (no hyphen mapping)
+
+        a root-static file is one whose incoming URL expects it to be at the root,
+        typically robots.txt & favicon.ico
+        '''
+        if len(self.args) == 1 and self.arg0 in self.router.root_static:
+            self.controller = self.request.controller = 'static'
+            root_static_file = os.path.join(self.request.env.applications_parent,
+                                   'applications', self.application,
+                                   self.controller, self.arg0)
+            logger.debug("route: root static=%s" % root_static_file)
+            return root_static_file
+        return None
+
+    def map_language(self):
+        "handle language (no hyphen mapping)"
+        arg0 = self.arg0  # no hyphen mapping
+        if arg0 and self.languages and arg0 in self.languages:
+            self.language = arg0
+        else:
+            self.language = self.default_language
+        if self.language:
+            logger.debug("route: language=%s" % self.language)
+            self.pop_arg_if(self.language == arg0)
+            arg0 = self.arg0
+
+    def map_controller(self):
+        "identify controller"
+        #  handle controller
+        #
+        arg0 = self.harg0    # map hyphens
+        if not arg0 or (self.controllers and arg0 not in self.controllers):
+            self.controller = self.default_controller or ''
+        else:
+            self.controller = arg0
+        self.pop_arg_if(arg0 == self.controller)
+        logger.debug("route: controller=%s" % self.controller)
+        if not self.router._acfe_match.match(self.controller):
+            raise HTTP(400, thread.routes.error_message % 'invalid request',
+                       web2py_error='invalid controller')
+
+    def map_static(self):
+        '''
+        handle static files
+        file_match but no hyphen mapping
+        '''
+        if self.controller != 'static':
+            return None
+        file = '/'.join(self.args)
+        if not self.router._file_match.match(file):
+            raise HTTP(400, thread.routes.error_message % 'invalid request',
+                       web2py_error='invalid static file')
+        #
+        #  support language-specific static subdirectories,
+        #  eg /appname/en/static/filename => applications/appname/static/en/filename
+        #  if language-specific file doesn't exist, try same file in static
+        #
+        if self.language:
+            static_file = os.path.join(self.request.env.applications_parent,
+                                   'applications', self.application,
+                                   'static', self.language, file)
+        if not self.language or not os.path.isfile(static_file):
+            static_file = os.path.join(self.request.env.applications_parent,
+                                   'applications', self.application,
+                                   'static', file)
+        logger.debug("route: static=%s" % static_file)
+        return static_file
+
+    def map_function(self):
+        "handle function.extension"
+        arg0 = self.harg0    # map hyphens
+        if not arg0 or self.functions and arg0 not in self.functions and self.controller == self.default_controller:
+            self.function = self.router.default_function or ""
+            self.pop_arg_if(arg0 and self.function == arg0)
+        else:
+            func_ext = arg0.split('.')
+            if len(func_ext) > 1:
+                self.function = func_ext[0]
+                self.extension = func_ext[-1]
+            else:
+                self.function = arg0
+            self.pop_arg_if(True)
+        logger.debug("route: function.ext=%s.%s" % (self.function, self.extension))
+
+        if not self.router._acfe_match.match(self.function):
+            raise HTTP(400, thread.routes.error_message % 'invalid request',
+                       web2py_error='invalid function')
+        if self.extension and not self.router._acfe_match.match(self.extension):
+            raise HTTP(400, thread.routes.error_message % 'invalid request',
+                       web2py_error='invalid extension')
+
+    def validate_args(self):
+        '''
+        check args against validation pattern
+        '''
+        for arg in self.args:
+            if not self.router._args_match.match(arg):
+                raise HTTP(400, thread.routes.error_message % 'invalid request',
+                           web2py_error='invalid arg <%s>' % arg)
+
+    def update_request(self):
+        '''
+        update request from self
+        build env.request_uri
+        make lower-case versions of http headers in env
+        '''
+        self.request.application = self.application
+        self.request.controller = self.controller
+        self.request.function = self.function
+        self.request.extension = self.extension
+        self.request.args = self.args
+        if self.language:
+            self.request.uri_language = self.language
+        uri = '/%s/%s/%s' % (self.application, self.controller, self.function)
+        if self.map_hyphen:
+            uri = uri.replace('_', '-')
+        if self.extension != 'html':
+            uri += '.' + self.extension
+        if self.language:
+            uri = '/%s%s' % (self.language, uri)
+        uri += self.args and urllib.quote('/' + '/'.join([str(x) for x in self.args])) or ''
+        uri += (self.query and ('?' + self.query) or '')
+        self.env['REQUEST_URI'] = uri
+        for (key, value) in self.env.items():
+            self.request.env[key.lower().replace('.', '_')] = value
+
+    @property
+    def arg0(self):
+        "return first arg"
+        return self.args(0)
+
+    @property
+    def harg0(self):
+        "return first arg with optional hyphen mapping"
+        if self.map_hyphen and self.args(0):
+            return self.args(0).replace('-', '_')
+        return self.args(0)
+
+    def pop_arg_if(self, dopop):
+        "conditionally remove first arg and return new first arg"
+        if dopop:
+            self.args.pop(0)
+
+class MapUrlOut(object):
+    "logic for mapping outgoing URLs"
+
+    def __init__(self, request, env, application, controller, function, args, other, scheme, host, port):
+        "initialize a map-out object"
+        self.default_application = routers.BASE.default_application
+        if application in routers:
+            self.router = routers[application]
+        else:
+            self.router = routers.BASE
+        self.request = request
+        self.env = env
+        self.application = application
+        self.controller = controller
+        self.function = function
+        self.args = args
+        self.other = other
+        self.scheme = scheme
+        self.host = host
+        self.port = port
+
+        self.applications = routers.BASE.applications
+        self.controllers = self.router.controllers
+        self.functions = self.router.functions
+        self.languages = self.router.languages
+        self.default_language = self.router.default_language
+        self.exclusive_domain = self.router.exclusive_domain
+        self.map_hyphen = self.router.map_hyphen
+        self.map_static = self.router.map_static
+        self.path_prefix = routers.BASE.path_prefix
+
+        self.domain_application = request and self.request.env.domain_application
+        self.domain_controller = request and self.request.env.domain_controller
+        self.default_function = self.router.default_function
+
+        if (self.router.exclusive_domain and self.domain_application and self.domain_application != self.application and not self.host):
+            raise SyntaxError, 'cross-domain conflict: must specify host'
+
+        lang = request and request.uri_language
+        if lang and self.languages and lang in self.languages:
+            self.language = lang
+        else:
+            self.language = None
+
+        self.omit_application = False
+        self.omit_language = False
+        self.omit_controller = False
+        self.omit_function = False
+
+    def omit_lang(self):
+        "omit language if possible"
+
+        if not self.language or self.language == self.default_language:
+            self.omit_language = True
+
+    def omit_acf(self):
+        "omit what we can of a/c/f"
+
+        router = self.router
+
+        #  Handle the easy no-args case of tail-defaults: /a/c  /a  /
+        #
+        if not self.args and self.function == router.default_function:
+            self.omit_function = True
+            if self.controller == router.default_controller:
+                self.omit_controller = True
+                if self.application == self.default_application:
+                    self.omit_application = True
+
+        #  omit default application
+        #  (which might be the domain default application)
+        #
+        default_application = self.domain_application or self.default_application
+        if self.application == default_application:
+            self.omit_application = True
+
+        #  omit controller if default controller
+        #
+        default_controller = ((self.application == self.domain_application) and self.domain_controller) or router.default_controller or ''
+        if self.controller == default_controller:
+            self.omit_controller = True
+
+        #  omit function if default controller/function
+        #
+        if self.functions and self.function == self.default_function and self.omit_controller:
+            self.omit_function = True
+
+        #  prohibit ambiguous cases
+        #
+        #  because we presume the lang string to be unambiguous, its presence protects application omission
+        #
+        if self.omit_language:
+            if not self.applications or self.controller in self.applications:
+                self.omit_application = False
+            if self.omit_application:
+                if not self.applications or self.function in self.applications:
+                    self.omit_controller = False
+        if not self.controllers or self.function in self.controllers:
+            self.omit_controller = False
+        if self.args:
+            if self.args[0] in self.functions or self.args[0] in self.controllers or self.args[0] in self.applications:
+                self.omit_function = False
+        if self.omit_controller:
+            if self.function in self.controllers or self.function in self.applications:
+                self.omit_controller = False
+        if self.omit_application:
+            if self.controller in self.applications:
+                self.omit_application = False
+
+        #  handle static as a special case
+        #  (easier for external static handling)
+        #
+        if self.controller == 'static' or self.controller.startswith('static/'):
+            if not self.map_static:
+                self.omit_application = False
+                if self.language:
+                    self.omit_language = False
+            self.omit_controller = False
+            self.omit_function = False
+
+    def build_acf(self):
+        "build acf from components"
+        acf = ''
+        if self.map_hyphen:
+            self.application = self.application.replace('_', '-')
+            self.controller = self.controller.replace('_', '-')
+            if self.controller != 'static' and not self.controller.startswith('static/'):
+                self.function = self.function.replace('_', '-')
+        if not self.omit_application:
+            acf += '/' + self.application
+        if not self.omit_language:
+            acf += '/' + self.language
+        if not self.omit_controller:
+            acf += '/' + self.controller
+        if not self.omit_function:
+            acf += '/' + self.function
+        if self.path_prefix:
+            acf = '/' + '/'.join(self.path_prefix) + acf
+        if self.args:
+            return acf
+        return acf or '/'
+
+    def acf(self):
+        "convert components to /app/lang/controller/function"
+
+        if not routers:
+            return None         # use regex filter
+        self.omit_lang()        # try to omit language
+        self.omit_acf()         # try to omit a/c/f
+        return self.build_acf() # build and return the /a/lang/c/f string
+
+
+def map_url_in(request, env, app=False):
+    "route incoming URL"
+
+    #  initialize router-url object
+    #
+    thread.routes = params  # default to base routes
+    map = MapUrlIn(request=request, env=env)
+    map.map_prefix()  # strip prefix if present
+    map.map_app()     # determine application
+
+    #  configure thread.routes for error rewrite
+    #
+    if params.routes_app:
+        thread.routes = params_apps.get(app, params)
+
+    if app:
+        return map.application
+
+    root_static_file = map.map_root_static() # handle root-static files
+    if root_static_file:
+        return (root_static_file, map.env)
+    map.map_language()
+    map.map_controller()
+    static_file = map.map_static()
+    if static_file:
+        return (static_file, map.env)
+    map.map_function()
+    map.validate_args()
+    map.update_request()
+    return (None, map.env)
+
+def map_url_out(request, env, application, controller, function, args, other, scheme, host, port):
+    '''
+    supply /a/c/f (or /a/lang/c/f) portion of outgoing url
+
+    The basic rule is that we can only make transformations
+    that map_url_in can reverse.
+
+    Suppose that the incoming arguments are a,c,f,args,lang
+    and that the router defaults are da, dc, df, dl.
+
+    We can perform these transformations trivially if args=[] and lang=None or dl:
+
+    /da/dc/df => /
+    /a/dc/df => /a
+    /a/c/df => /a/c
+
+    We would also like to be able to strip the default application or application/controller
+    from URLs with function/args present, thus:
+
+        /da/c/f/args  => /c/f/args
+        /da/dc/f/args => /f/args
+
+    We use [applications] and [controllers] and [functions] to suppress ambiguous omissions.
+
+    We assume that language names do not collide with a/c/f names.
+    '''
+    map = MapUrlOut(request, env, application, controller, function, args, other, scheme, host, port)
+    return map.acf()
+
+def get_effective_router(appname):
+    "return a private copy of the effective router for the specified application"
+    if not routers or appname not in routers:
+        return None
+    return Storage(routers[appname])  # return a copy
+

ADDED   gluon/rocket.py
Index: gluon/rocket.py
==================================================================
--- /dev/null
+++ gluon/rocket.py
@@ -0,0 +1,1625 @@
+# -*- coding: utf-8 -*-
+
+# This file is part of the Rocket Web Server
+# Copyright (c) 2010 Timothy Farrell
+
+# Import System Modules
+import sys
+import errno
+import socket
+import logging
+import platform
+
+# Define Constants
+VERSION = '1.2.2'
+SERVER_NAME = socket.gethostname()
+SERVER_SOFTWARE = 'Rocket %s' % VERSION
+HTTP_SERVER_SOFTWARE = '%s Python/%s' % (SERVER_SOFTWARE, sys.version.split(' ')[0])
+BUF_SIZE = 16384
+SOCKET_TIMEOUT = 1 # in secs
+THREAD_STOP_CHECK_INTERVAL = 1 # in secs, How often should threads check for a server stop message?
+IS_JYTHON = platform.system() == 'Java' # Handle special cases for Jython
+IGNORE_ERRORS_ON_CLOSE = set([errno.ECONNABORTED, errno.ECONNRESET])
+DEFAULT_LISTEN_QUEUE_SIZE = 5
+DEFAULT_MIN_THREADS = 10
+DEFAULT_MAX_THREADS = 0
+DEFAULTS = dict(LISTEN_QUEUE_SIZE = DEFAULT_LISTEN_QUEUE_SIZE,
+                MIN_THREADS = DEFAULT_MIN_THREADS,
+                MAX_THREADS = DEFAULT_MAX_THREADS)
+
+PY3K = sys.version_info[0] > 2
+
+class NullHandler(logging.Handler):
+    "A Logging handler to prevent library errors."
+    def emit(self, record):
+        pass
+
+if PY3K:
+    def b(val):
+        """ Convert string/unicode/bytes literals into bytes.  This allows for
+        the same code to run on Python 2.x and 3.x. """
+        if isinstance(val, str):
+            return val.encode()
+        else:
+            return val
+
+    def u(val, encoding="us-ascii"):
+        """ Convert bytes into string/unicode.  This allows for the
+        same code to run on Python 2.x and 3.x. """
+        if isinstance(val, bytes):
+            return val.decode(encoding)
+        else:
+            return val
+
+else:
+    def b(val):
+        """ Convert string/unicode/bytes literals into bytes.  This allows for
+        the same code to run on Python 2.x and 3.x. """
+        if isinstance(val, unicode):
+            return val.encode()
+        else:
+            return val
+
+    def u(val, encoding="us-ascii"):
+        """ Convert bytes into string/unicode.  This allows for the
+        same code to run on Python 2.x and 3.x. """
+        if isinstance(val, str):
+            return val.decode(encoding)
+        else:
+            return val
+
+# Import Package Modules
+# package imports removed in monolithic build
+
+__all__ = ['VERSION', 'SERVER_SOFTWARE', 'HTTP_SERVER_SOFTWARE', 'BUF_SIZE',
+           'IS_JYTHON', 'IGNORE_ERRORS_ON_CLOSE', 'DEFAULTS', 'PY3K', 'b', 'u',
+           'Rocket', 'CherryPyWSGIServer', 'SERVER_NAME', 'NullHandler']
+
+# Monolithic build...end of module: rocket\__init__.py
+# Monolithic build...start of module: rocket\connection.py
+
+# Import System Modules
+import sys
+import time
+import socket
+try:
+    import ssl
+    has_ssl = True
+except ImportError:
+    has_ssl = False
+# package imports removed in monolithic build
+
+class Connection(object):
+    __slots__ = [
+        'setblocking',
+        'sendall',
+        'shutdown',
+        'makefile',
+        'fileno',
+        'client_addr',
+        'client_port',
+        'server_port',
+        'socket',
+        'start_time',
+        'ssl',
+        'secure'
+    ]
+
+    def __init__(self, sock_tuple, port, secure=False):
+        self.client_addr, self.client_port = sock_tuple[1]
+        self.server_port = port
+        self.socket = sock_tuple[0]
+        self.start_time = time.time()
+        self.ssl = has_ssl and isinstance(self.socket, ssl.SSLSocket)
+        self.secure = secure
+
+        if IS_JYTHON:
+            # In Jython we must set TCP_NODELAY here since it does not
+            # inherit from the listening socket.
+            # See: http://bugs.jython.org/issue1309
+            self.socket.setsockopt(socket.IPPROTO_TCP, socket.TCP_NODELAY, 1)
+
+        self.socket.settimeout(SOCKET_TIMEOUT)
+
+        self.sendall = self.socket.sendall
+        self.shutdown = self.socket.shutdown
+        self.fileno = self.socket.fileno
+        self.makefile = self.socket.makefile
+        self.setblocking = self.socket.setblocking
+
+    def close(self):
+        if hasattr(self.socket, '_sock'):
+            try:
+                self.socket._sock.close()
+            except socket.error:
+                info = sys.exc_info()
+                if info[1].errno != socket.EBADF:
+                    raise info[1]
+                else:
+                    pass
+        self.socket.close()
+
+# Monolithic build...end of module: rocket\connection.py
+# Monolithic build...start of module: rocket\listener.py
+
+# Import System Modules
+import os
+import socket
+import logging
+import traceback
+from threading import Thread
+
+try:
+    import ssl
+    from ssl import SSLError
+    has_ssl = True
+except ImportError:
+    has_ssl = False
+    class SSLError(socket.error):
+        pass
+# Import Package Modules
+# package imports removed in monolithic build
+
+class Listener(Thread):
+    """The Listener class is a class responsible for accepting connections
+    and queuing them to be processed by a worker thread."""
+
+    def __init__(self, interface, queue_size, active_queue, *args, **kwargs):
+        Thread.__init__(self, *args, **kwargs)
+
+        # Instance variables
+        self.active_queue = active_queue
+        self.interface = interface
+        self.addr = interface[0]
+        self.port = interface[1]
+        self.secure = len(interface) == 4 and \
+                      os.path.exists(interface[2]) and \
+                      os.path.exists(interface[3])
+        self.ready = False
+
+        # Error Log
+        self.err_log = logging.getLogger('Rocket.Errors.Port%i' % self.port)
+        self.err_log.addHandler(NullHandler())
+
+        # Build the socket
+        listener = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+
+        if not listener:
+            self.err_log.error("Failed to get socket.")
+            return
+
+        if self.secure:
+            if not has_ssl:
+                self.err_log.error("ssl module required to serve HTTPS.")
+                return
+            elif not os.path.exists(interface[2]):
+                data = (interface[2], interface[0], interface[1])
+                self.err_log.error("Cannot find key file "
+                          "'%s'.  Cannot bind to %s:%s" % data)
+                return
+            elif not os.path.exists(interface[3]):
+                data = (interface[3], interface[0], interface[1])
+                self.err_log.error("Cannot find certificate file "
+                          "'%s'.  Cannot bind to %s:%s" % data)
+                return
+
+        # Set socket options
+        try:
+            listener.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
+        except:
+            msg = "Cannot share socket.  Using %s:%i exclusively."
+            self.err_log.warning(msg % (self.addr, self.port))
+
+        try:
+            if not IS_JYTHON:
+                listener.setsockopt(socket.IPPROTO_TCP,
+                                    socket.TCP_NODELAY,
+                                    1)
+        except:
+            msg = "Cannot set TCP_NODELAY, things might run a little slower"
+            self.err_log.warning(msg)
+
+        try:
+            listener.bind((self.addr, self.port))
+        except:
+            msg = "Socket %s:%i in use by other process and it won't share."
+            self.err_log.error(msg % (self.addr, self.port))
+        else:
+            # We want socket operations to timeout periodically so we can
+            # check if the server is shutting down
+            listener.settimeout(THREAD_STOP_CHECK_INTERVAL)
+            # Listen for new connections allowing queue_size number of
+            # connections to wait before rejecting a connection.
+            listener.listen(queue_size)
+
+            self.listener = listener
+
+            self.ready = True
+
+    def wrap_socket(self, sock):
+        try:
+            sock = ssl.wrap_socket(sock,
+                                   keyfile = self.interface[2],
+                                   certfile = self.interface[3],
+                                   server_side = True,
+                                   ssl_version = ssl.PROTOCOL_SSLv23)
+        except SSLError:
+            # Generally this happens when an HTTP request is received on a
+            # secure socket. We don't do anything because it will be detected
+            # by Worker and dealt with appropriately.
+            pass
+
+        return sock
+
+
+    def run(self):
+        if not self.ready:
+            self.err_log.warning('Listener started when not ready.')
+            return
+
+        if __debug__:
+            self.err_log.debug('Entering main loop.')
+        while True:
+            try:
+                sock, addr = self.listener.accept()
+
+                if self.secure:
+                    sock = self.wrap_socket(sock)
+
+                self.active_queue.put(((sock, addr),
+                                       self.interface[1],
+                                       self.secure))
+
+            except socket.timeout:
+                # socket.timeout will be raised every THREAD_STOP_CHECK_INTERVAL
+                # seconds.  When that happens, we check if it's time to die.
+
+                if not self.ready:
+                    if __debug__:
+                        self.err_log.debug('Listener exiting.')
+                    return
+                else:
+                    continue
+            except:
+                self.err_log.error(str(traceback.format_exc()))
+
+# Monolithic build...end of module: rocket\listener.py
+# Monolithic build...start of module: rocket\main.py
+
+# Import System Modules
+import sys
+import time
+import socket
+import logging
+import traceback
+
+try:
+    from queue import Queue
+except ImportError:
+    from Queue import Queue
+
+# Import Package Modules
+# package imports removed in monolithic build
+
+
+
+
+
+# Setup Logging
+log = logging.getLogger('Rocket')
+log.addHandler(NullHandler())
+
+class Rocket(object):
+    """The Rocket class is responsible for handling threads and accepting and
+    dispatching connections."""
+
+    def __init__(self,
+                 interfaces = ('127.0.0.1', 8000),
+                 method = 'wsgi',
+                 app_info = None,
+                 min_threads = None,
+                 max_threads = None,
+                 queue_size = None,
+                 timeout = 600,
+                 handle_signals = True):
+
+        self.handle_signals = handle_signals
+
+        if not isinstance(interfaces, list):
+            self.interfaces = [interfaces]
+        else:
+            self.interfaces = interfaces
+
+        if min_threads is None:
+            min_threads = DEFAULTS['MIN_THREADS']
+
+        if max_threads is None:
+            max_threads = DEFAULTS['MAX_THREADS']
+
+        if not queue_size:
+            if hasattr(socket, 'SOMAXCONN'):
+                queue_size = socket.SOMAXCONN
+            else:
+                queue_size = DEFAULTS['LISTEN_QUEUE_SIZE']
+
+        if max_threads and queue_size > max_threads:
+            queue_size = max_threads
+
+        if isinstance(app_info, dict):
+            app_info['server_software'] = SERVER_SOFTWARE
+
+        monitor_queue = Queue()
+        active_queue = Queue()
+
+        self._monitor = Monitor(monitor_queue, active_queue, timeout)
+
+        self._threadpool = ThreadPool(get_method(method),
+                                      app_info = app_info,
+                                      active_queue=active_queue,
+                                      monitor_queue = monitor_queue,
+                                      min_threads=min_threads,
+                                      max_threads=max_threads)
+
+        # Build our socket listeners
+        self.listeners = [Listener(i, queue_size, active_queue) for i in self.interfaces]
+        for ndx in range(len(self.listeners)-1, 0, -1):
+            if not self.listeners[ndx].ready:
+                del self.listeners[ndx]
+
+        if not self.listeners:
+            log.critical("No interfaces to listen on...closing.")
+            sys.exit(1)
+
+    def _sigterm(self, signum, frame):
+        log.info('Received SIGTERM')
+        self.stop()
+
+    def _sighup(self, signum, frame):
+        log.info('Received SIGHUP')
+        self.restart()
+
+    def start(self):
+        log.info('Starting %s' % SERVER_SOFTWARE)
+
+        # Set up our shutdown signals
+        if self.handle_signals:
+            try:
+                import signal
+                signal.signal(signal.SIGTERM, self._sigterm)
+                signal.signal(signal.SIGUSR1, self._sighup)
+            except:
+                log.debug('This platform does not support signals.')
+
+        # Start our worker threads
+        self._threadpool.start()
+
+        # Start our monitor thread
+        self._monitor.setDaemon(True)
+        self._monitor.start()
+
+        # I know that EXPR and A or B is bad but I'm keeping it for Py2.4
+        # compatibility.
+        str_extract = lambda l: (l.addr, l.port, l.secure and '*' or '')
+
+        msg = 'Listening on sockets: '
+        msg += ', '.join(['%s:%i%s' % str_extract(l) for l in self.listeners])
+        log.info(msg)
+
+        for l in self.listeners:
+            l.start()
+
+        tp = self._threadpool
+        dynamic_resize = tp.dynamic_resize
+
+        while not tp.stop_server:
+            try:
+                dynamic_resize()
+                time.sleep(THREAD_STOP_CHECK_INTERVAL)
+            except KeyboardInterrupt:
+                # Capture a keyboard interrupt when running from a console
+                break
+            except:
+                if not tp.stop_server:
+                    log.error(str(traceback.format_exc()))
+                    continue
+
+        return self.stop()
+
+    def stop(self, stoplogging = True):
+        log.info("Stopping Server")
+
+        # Stop listeners
+        for l in self.listeners:
+            l.ready = False
+            if l.isAlive():
+                l.join()
+
+        # Stop Worker threads
+        self._threadpool.stop()
+
+        # Stop Monitor
+        self._monitor.stop()
+        if self._monitor.isAlive():
+            self._monitor.join()
+
+        if stoplogging:
+            logging.shutdown()
+
+    def restart(self):
+        self.stop(False)
+        self.start()
+
+def CherryPyWSGIServer(bind_addr,
+                       wsgi_app,
+                       numthreads = 10,
+                       server_name = None,
+                       max = -1,
+                       request_queue_size = 5,
+                       timeout = 10,
+                       shutdown_timeout = 5):
+    """ A Cherrypy wsgiserver-compatible wrapper. """
+    max_threads = max
+    if max_threads < 0:
+        max_threads = 0
+    return Rocket(bind_addr, 'wsgi', {'wsgi_app': wsgi_app},
+                  min_threads = numthreads,
+                  max_threads = max_threads,
+                  queue_size = request_queue_size,
+                  timeout = timeout)
+
+# Monolithic build...end of module: rocket\main.py
+# Monolithic build...start of module: rocket\monitor.py
+
+# Import System Modules
+import time
+import logging
+import select
+from threading import Thread
+
+# Import Package Modules
+# package imports removed in monolithic build
+
+class Monitor(Thread):
+    # Monitor worker class.
+
+    def __init__(self,
+                 monitor_queue,
+                 active_queue,
+                 timeout,
+                 *args,
+                 **kwargs):
+
+        Thread.__init__(self, *args, **kwargs)
+
+        # Instance Variables
+        self.monitor_queue = monitor_queue
+        self.active_queue = active_queue
+        self.timeout = timeout
+
+        self.connections = set()
+        self.active = False
+
+    def run(self):
+        self.name = self.getName()
+        self.log = logging.getLogger('Rocket.Monitor')
+        self.log.addHandler(NullHandler())
+
+        self.active = True
+        conn_list = list()
+        list_changed = False
+
+        if __debug__:
+            self.log.debug('Entering monitor loop.')
+
+        # Enter thread main loop
+        while self.active:
+            # Move the queued connections to the selection pool
+            while not self.monitor_queue.empty() or not len(self.connections):
+                if __debug__:
+                    self.log.debug('In "receive timed-out connections" loop.')
+
+                c = self.monitor_queue.get()
+
+                if c is None:
+                    # A non-client is a signal to die
+                    if __debug__:
+                        self.log.debug('Received a death threat.')
+                    return
+
+                self.log.debug('Received a timed out connection.')
+
+                if __debug__:
+                    assert(c not in self.connections)
+
+                if IS_JYTHON:
+                    # Jython requires a socket to be in Non-blocking mode in
+                    # order to select on it.
+                    c.setblocking(False)
+
+                if __debug__:
+                    self.log.debug('Adding connection to monitor list.')
+
+                self.connections.add(c)
+                list_changed = True
+
+            # Wait on those connections
+            self.log.debug('Blocking on connections')
+            if list_changed:
+                conn_list = list(self.connections)
+                list_changed = False
+
+            try:
+                readable = select.select(conn_list,
+                                         [],
+                                         [],
+                                         THREAD_STOP_CHECK_INTERVAL)[0]
+            except:
+                if self.active:
+                    raise
+                else:
+                    break
+
+            # If we have any readable connections, put them back
+            for r in readable:
+                if __debug__:
+                    self.log.debug('Restoring readable connection')
+
+                if IS_JYTHON:
+                    # Jython requires a socket to be in Non-blocking mode in
+                    # order to select on it, but the rest of the code requires
+                    # that it be in blocking mode.
+                    r.setblocking(True)
+
+                r.start_time = time.time()
+                self.active_queue.put(r)
+
+                self.connections.remove(r)
+                list_changed = True
+
+            # If we have any stale connections, kill them off.
+            if self.timeout:
+                now = time.time()
+                stale = set()
+                for c in self.connections:
+                    if (now - c.start_time) >= self.timeout:
+                        stale.add(c)
+
+                for c in stale:
+                    if __debug__:
+                        # "EXPR and A or B" kept for Py2.4 compatibility
+                        data = (c.client_addr, c.server_port, c.ssl and '*' or '')
+                        self.log.debug('Flushing stale connection: %s:%i%s' % data)
+
+                    self.connections.remove(c)
+                    list_changed = True
+
+                    try:
+                        c.close()
+                    finally:
+                        del c
+
+    def stop(self):
+        self.active = False
+
+        if __debug__:
+            self.log.debug('Flushing waiting connections')
+
+        for c in self.connections:
+            try:
+                c.close()
+            finally:
+                del c
+
+        if __debug__:
+            self.log.debug('Flushing queued connections')
+
+        while not self.monitor_queue.empty():
+            c = self.monitor_queue.get()
+
+            if c is None:
+                continue
+
+            try:
+                c.close()
+            finally:
+                del c
+
+        # Place a None sentry value to cause the monitor to die.
+        self.monitor_queue.put(None)
+
+# Monolithic build...end of module: rocket\monitor.py
+# Monolithic build...start of module: rocket\threadpool.py
+
+# Import System Modules
+import logging
+# Import Package Modules
+# package imports removed in monolithic build
+
+# Setup Logging
+log = logging.getLogger('Rocket.Errors.ThreadPool')
+log.addHandler(NullHandler())
+
+class ThreadPool:
+    """The ThreadPool class is a container class for all the worker threads. It
+    manages the number of actively running threads."""
+
+    def __init__(self,
+                 method,
+                 app_info,
+                 active_queue,
+                 monitor_queue,
+                 min_threads=DEFAULTS['MIN_THREADS'],
+                 max_threads=DEFAULTS['MAX_THREADS'],
+                 ):
+
+        if __debug__:
+            log.debug("Initializing ThreadPool.")
+
+        self.check_for_dead_threads = 0
+        self.active_queue = active_queue
+
+        self.worker_class = method
+        self.min_threads = min_threads
+        self.max_threads = max_threads
+        self.monitor_queue = monitor_queue
+        self.stop_server = False
+
+        # TODO - Optimize this based on some real-world usage data
+        self.grow_threshold = int(max_threads/10) + 2
+
+        if not isinstance(app_info, dict):
+            app_info = dict()
+
+        app_info.update(max_threads=max_threads,
+                        min_threads=min_threads)
+
+        self.app_info = app_info
+
+        self.threads = set()
+        for x in range(min_threads):
+            worker = self.worker_class(app_info,
+                                       self.active_queue,
+                                       self.monitor_queue)
+            self.threads.add(worker)
+
+    def start(self):
+        self.stop_server = False
+        if __debug__:
+            log.debug("Starting threads.")
+
+        for thread in self.threads:
+            thread.setDaemon(True)
+            thread.start()
+
+    def stop(self):
+        if __debug__:
+            log.debug("Stopping threads.")
+
+        self.stop_server = True
+
+        # Prompt the threads to die
+        for t in self.threads:
+            self.active_queue.put(None)
+
+        # Give them the gun
+        for t in self.threads:
+            t.kill()
+
+        # Wait until they pull the trigger
+        for t in self.threads:
+            t.join()
+
+        # Clean up the mess
+        self.bring_out_your_dead()
+
+    def bring_out_your_dead(self):
+        # Remove dead threads from the pool
+
+        dead_threads = [t for t in self.threads if not t.isAlive()]
+        for t in dead_threads:
+            if __debug__:
+                log.debug("Removing dead thread: %s." % t.getName())
+            try:
+                # Py2.4 complains here so we put it in a try block
+                self.threads.remove(t)
+            except:
+                pass
+        self.check_for_dead_threads -= len(dead_threads)
+
+    def grow(self, amount=None):
+        if self.stop_server:
+            return
+
+        if not amount:
+            amount = self.max_threads
+
+        amount = min([amount, self.max_threads - len(self.threads)])
+
+        if __debug__:
+            log.debug("Growing by %i." % amount)
+
+        for x in range(amount):
+            worker = self.worker_class(self.app_info,
+                                       self.active_queue,
+                                       self.monitor_queue)
+
+            worker.setDaemon(True)
+            self.threads.add(worker)
+            worker.start()
+
+    def shrink(self, amount=1):
+        if __debug__:
+            log.debug("Shrinking by %i." % amount)
+
+        self.check_for_dead_threads += amount
+
+        for x in range(amount):
+            self.active_queue.put(None)
+
+    def dynamic_resize(self):
+        if (self.max_threads > self.min_threads or self.max_threads == 0):
+            if self.check_for_dead_threads > 0:
+                self.bring_out_your_dead()
+
+            queueSize = self.active_queue.qsize()
+            threadCount = len(self.threads)
+
+            if __debug__:
+                log.debug("Examining ThreadPool. %i threads and %i Q'd conxions"
+                          % (threadCount, queueSize))
+
+            if queueSize == 0 and threadCount > self.min_threads:
+                self.shrink()
+
+            elif queueSize > self.grow_threshold:
+
+                self.grow(queueSize)
+
+# Monolithic build...end of module: rocket\threadpool.py
+# Monolithic build...start of module: rocket\worker.py
+
+# Import System Modules
+import re
+import sys
+import socket
+import logging
+import traceback
+#from wsgiref.headers import Headers
+from threading import Thread
+from datetime import datetime
+
+try:
+    from urllib import unquote
+except ImportError:
+    from urllib.parse import unquote
+
+try:
+    from io import StringIO
+except ImportError:
+    try:
+        from cStringIO import StringIO
+    except ImportError:
+        from StringIO import StringIO
+
+try:
+    from ssl import SSLError
+except ImportError:
+    class SSLError(socket.error):
+        pass
+# Import Package Modules
+# package imports removed in monolithic build
+
+
+# Define Constants
+re_SLASH = re.compile('%2F', re.IGNORECASE)
+re_REQUEST_LINE = re.compile(r"""^
+(?P<method>OPTIONS|GET|HEAD|POST|PUT|DELETE|TRACE|CONNECT)   # Request Method
+\                                                            # (single space)
+(
+    (?P<scheme>[^:/]+)                                       # Scheme
+    (://)  #
+    (?P<host>[^/]+)                                          # Host
+)? #
+(?P<path>(\*|/[^ \?]*))                                      # Path
+(\? (?P<query_string>[^ ]+))?                                # Query String
+\                                                            # (single space)
+(?P<protocol>HTTPS?/1\.[01])                                 # Protocol
+$
+""", re.X)
+LOG_LINE = '%(client_ip)s - "%(request_line)s" - %(status)s %(size)s'
+RESPONSE = '''\
+HTTP/1.1 %s
+Content-Length: %i
+Content-Type: %s
+
+%s
+'''
+if IS_JYTHON:
+    HTTP_METHODS = set(['OPTIONS', 'GET', 'HEAD', 'POST', 'PUT', 'DELETE', 'TRACE', 'CONNECT'])
+
+###
+# The Headers and FileWrapper classes are ripped straight from the Python
+# Standard Library. I've removed some docstrings and integrated my BUF_SIZE.
+# See the Python License here: http://docs.python.org/license.html
+###
+
+# Regular expression that matches `special' characters in parameters, the
+# existance of which force quoting of the parameter value.
+import re
+_tspecials = re.compile(r'[ \(\)<>@,;:\\"/\[\]\?=]')
+
+def _formatparam(param, value=None, quote=1):
+    """Convenience function to format and return a key=value pair.
+
+    This will quote the value if needed or if quote is true.
+    """
+    if value is not None and len(value) > 0:
+        if quote or _tspecials.search(value):
+            value = value.replace('\\', '\\\\').replace('"', r'\"')
+            return '%s="%s"' % (param, value)
+        else:
+            return '%s=%s' % (param, value)
+    else:
+        return param
+
+class Headers:
+    def __init__(self,headers):
+        if type(headers) is not type([]):
+            raise TypeError("Headers must be a list of name/value tuples")
+        self._headers = headers
+
+    def __len__(self):
+        return len(self._headers)
+
+    def __setitem__(self, name, val):
+        del self[name]
+        self._headers.append((name, val))
+
+    def __delitem__(self,name):
+        name = name.lower()
+        self._headers[:] = [kv for kv in self._headers if kv[0].lower() != name]
+
+    def __getitem__(self,name):
+        return self.get(name)
+
+    def has_key(self, name):
+        return self.get(name) is not None
+
+    __contains__ = has_key
+
+    def get_all(self, name):
+        name = name.lower()
+        return [kv[1] for kv in self._headers if kv[0].lower()==name]
+
+    def get(self,name,default=None):
+        name = name.lower()
+        for k,v in self._headers:
+            if k.lower()==name:
+                return v
+        return default
+
+    def keys(self):
+        return [k for k, v in self._headers]
+
+    def values(self):
+        return [v for k, v in self._headers]
+
+    def items(self):
+        return self._headers[:]
+
+    def __repr__(self):
+        return "Headers(%r)" % self._headers
+
+    def __str__(self):
+        return '\r\n'.join(["%s: %s" % kv for kv in self._headers]+['',''])
+
+    def setdefault(self,name,value):
+        result = self.get(name)
+        if result is None:
+            self._headers.append((name,value))
+            return value
+        else:
+            return result
+
+
+    def add_header(self, _name, _value, **_params):
+        parts = []
+        if _value is not None:
+            parts.append(_value)
+        for k, v in _params.items():
+            if v is None:
+                parts.append(k.replace('_', '-'))
+            else:
+                parts.append(_formatparam(k.replace('_', '-'), v))
+        self._headers.append((_name, "; ".join(parts)))
+
+class FileWrapper:
+    """Wrapper to convert file-like objects to iterables"""
+
+    def __init__(self, filelike, blksize=BUF_SIZE):
+        self.filelike = filelike
+        self.blksize = blksize
+        if hasattr(filelike,'close'):
+            self.close = filelike.close
+
+    def __getitem__(self,key):
+        data = self.filelike.read(self.blksize)
+        if data:
+            return data
+        raise IndexError
+
+    def __iter__(self):
+        return self
+
+    def next(self):
+        data = self.filelike.read(self.blksize)
+        if data:
+            return data
+        raise StopIteration
+
+class Worker(Thread):
+    """The Worker class is a base class responsible for receiving connections
+    and (a subclass) will run an application to process the the connection """
+
+    def __init__(self,
+                 app_info,
+                 active_queue,
+                 monitor_queue,
+                 *args,
+                 **kwargs):
+
+        Thread.__init__(self, *args, **kwargs)
+
+        # Instance Variables
+        self.app_info = app_info
+        self.active_queue = active_queue
+        self.monitor_queue = monitor_queue
+
+        self.size = 0
+        self.status = "200 OK"
+        self.closeConnection = True
+
+        # Request Log
+        self.req_log = logging.getLogger('Rocket.Requests')
+        self.req_log.addHandler(NullHandler())
+
+        # Error Log
+        self.err_log = logging.getLogger('Rocket.Errors.'+self.getName())
+        self.err_log.addHandler(NullHandler())
+
+    def _handleError(self, typ, val, tb):
+        if typ == SSLError:
+            if 'timed out' in val.args[0]:
+                typ = SocketTimeout
+        if typ == SocketTimeout:
+            if __debug__:
+                self.err_log.debug('Socket timed out')
+            self.monitor_queue.put(self.conn)
+            return True
+        if typ == SocketClosed:
+            self.closeConnection = True
+            if __debug__:
+                self.err_log.debug('Client closed socket')
+            return False
+        if typ == BadRequest:
+            self.closeConnection = True
+            if __debug__:
+                self.err_log.debug('Client sent a bad request')
+            return True
+        if typ == socket.error:
+            self.closeConnection = True
+            if val.args[0] in IGNORE_ERRORS_ON_CLOSE:
+                if __debug__:
+                    self.err_log.debug('Ignorable socket Error received...'
+                                       'closing connection.')
+                return False
+            else:
+                self.status = "999 Utter Server Failure"
+                tb_fmt = traceback.format_exception(typ, val, tb)
+                self.err_log.error('Unhandled Error when serving '
+                                   'connection:\n' + '\n'.join(tb_fmt))
+                return False
+
+        self.closeConnection = True
+        tb_fmt = traceback.format_exception(typ, val, tb)
+        self.err_log.error('\n'.join(tb_fmt))
+        self.send_response('500 Server Error')
+        return False
+
+    def run(self):
+        if __debug__:
+            self.err_log.debug('Entering main loop.')
+
+        # Enter thread main loop
+        while True:
+            conn = self.active_queue.get()
+
+            if not conn:
+                # A non-client is a signal to die
+                if __debug__:
+                    self.err_log.debug('Received a death threat.')
+                return conn
+
+            if isinstance(conn, tuple):
+                conn = Connection(*conn)
+
+            self.conn = conn
+
+            if conn.ssl != conn.secure:
+                self.err_log.info('Received HTTP connection on HTTPS port.')
+                self.send_response('400 Bad Request')
+                self.closeConnection = True
+                conn.close()
+                continue
+            else:
+                if __debug__:
+                    self.err_log.debug('Received a connection.')
+                self.closeConnection = False
+
+            # Enter connection serve loop
+            while True:
+                if __debug__:
+                    self.err_log.debug('Serving a request')
+                try:
+                    self.run_app(conn)
+                    log_info = dict(client_ip = conn.client_addr,
+                                    time = datetime.now().strftime('%c'),
+                                    status = self.status.split(' ')[0],
+                                    size = self.size,
+                                    request_line = self.request_line)
+                    self.req_log.info(LOG_LINE % log_info)
+                except:
+                    exc = sys.exc_info()
+                    handled = self._handleError(*exc)
+                    if handled:
+                        break
+                    else:
+                        if self.request_line:
+                            log_info = dict(client_ip = conn.client_addr,
+                                            time = datetime.now().strftime('%c'),
+                                            status = self.status.split(' ')[0],
+                                            size = self.size,
+                                            request_line = self.request_line + ' - not stopping')
+                            self.req_log.info(LOG_LINE % log_info)
+
+                if self.closeConnection:
+                    try:
+                        conn.close()
+                    except:
+                        self.err_log.error(str(traceback.format_exc()))
+
+                    break
+
+    def run_app(self, conn):
+        # Must be overridden with a method reads the request from the socket
+        # and sends a response.
+        self.closeConnection = True
+        raise NotImplementedError('Overload this method!')
+
+    def send_response(self, status):
+        stat_msg = status.split(' ', 1)[1]
+        msg = RESPONSE % (status,
+                          len(stat_msg),
+                          'text/plain',
+                          stat_msg)
+        try:
+            self.conn.sendall(b(msg))
+        except socket.error:
+            self.closeConnection = True
+            self.err_log.error('Tried to send "%s" to client but received socket'
+                           ' error' % status)
+
+    def kill(self):
+        if self.isAlive() and hasattr(self, 'conn'):
+            try:
+                self.conn.shutdown(socket.SHUT_RDWR)
+            except socket.error:
+                info = sys.exc_info()
+                if info[1].args[0] != socket.EBADF:
+                    self.err_log.debug('Error on shutdown: '+str(info))
+
+    def read_request_line(self, sock_file):
+        self.request_line = ''
+        try:
+            # Grab the request line
+            d = sock_file.readline()
+            if PY3K:
+                d = d.decode('ISO-8859-1')
+
+            if d == '\r\n':
+                # Allow an extra NEWLINE at the beginning per HTTP 1.1 spec
+                if __debug__:
+                    self.err_log.debug('Client sent newline')
+
+                d = sock_file.readline()
+                if PY3K:
+                    d = d.decode('ISO-8859-1')
+        except socket.timeout:
+            raise SocketTimeout("Socket timed out before request.")
+
+        d = d.strip()
+
+        if not d:
+            if __debug__:
+                self.err_log.debug('Client did not send a recognizable request.')
+            raise SocketClosed('Client closed socket.')
+
+        self.request_line = d
+
+        # NOTE: I've replaced the traditional method of procedurally breaking
+        # apart the request line with a (rather unsightly) regular expression.
+        # However, Java's regexp support sucks so bad that it actually takes
+        # longer in Jython to process the regexp than procedurally. So I've
+        # left the old code here for Jython's sake...for now.
+        if IS_JYTHON:
+            return self._read_request_line_jython(d)
+
+        match = re_REQUEST_LINE.match(d)
+
+        if not match:
+            self.send_response('400 Bad Request')
+            raise BadRequest
+
+        req = match.groupdict()
+        for k,v in req.items():
+            if not v:
+                req[k] = ""
+            if k == 'path':
+                req['path'] = r'%2F'.join([unquote(x) for x in re_SLASH.split(v)])
+
+        return req
+
+    def _read_request_line_jython(self, d):
+        d = d.strip()
+        try:
+            method, uri, proto = d.split(' ')
+            if not proto.startswith('HTTP') or \
+               proto[-3:] not in ('1.0', '1.1') or \
+               method not in HTTP_METHODS:
+                self.send_response('400 Bad Request')
+                raise BadRequest
+        except ValueError:
+            self.send_response('400 Bad Request')
+            raise BadRequest
+
+        req = dict(method=method, protocol = proto)
+        scheme = ''
+        host = ''
+        if uri == '*' or uri.startswith('/'):
+            path = uri
+        elif '://' in uri:
+            scheme, rest = uri.split('://')
+            host, path = rest.split('/', 1)
+            path = '/' + path
+        else:
+            self.send_response('400 Bad Request')
+            raise BadRequest
+
+        query_string = ''
+        if '?' in path:
+            path, query_string = path.split('?', 1)
+
+        path = r'%2F'.join([unquote(x) for x in re_SLASH.split(path)])
+
+        req.update(path=path,
+                   query_string=query_string,
+                   scheme=scheme.lower(),
+                   host=host)
+        return req
+
+
+    def read_headers(self, sock_file):
+        headers = dict()
+        l = sock_file.readline()
+
+        lname = None
+        lval = None
+        while True:
+            if PY3K:
+                try:
+                    l = str(l, 'ISO-8859-1')
+                except UnicodeDecodeError:
+                    self.err_log.warning('Client sent invalid header: ' + repr(l))
+
+            if l == '\r\n':
+                break
+
+            if l[0] in ' \t' and lname:
+                # Some headers take more than one line
+                lval += ',' + l.strip()
+            else:
+                # HTTP header values are latin-1 encoded
+                l = l.split(':', 1)
+                # HTTP header names are us-ascii encoded
+
+                lname = l[0].strip().upper().replace('-', '_')
+                lval = l[-1].strip()
+            headers[str(lname)] = str(lval)
+
+            l = sock_file.readline()
+        return headers
+
+class SocketTimeout(Exception):
+    "Exception for when a socket times out between requests."
+    pass
+
+class BadRequest(Exception):
+    "Exception for when a client sends an incomprehensible request."
+    pass
+
+class SocketClosed(Exception):
+    "Exception for when a socket is closed by the client."
+    pass
+
+class ChunkedReader(object):
+    def __init__(self, sock_file):
+        self.stream = sock_file
+        self.chunk_size = 0
+
+    def _read_header(self):
+        chunk_len = ""
+        try:
+            while "" == chunk_len:
+                chunk_len = self.stream.readline().strip()
+            return int(chunk_len, 16)
+        except ValueError:
+            return 0
+
+    def read(self, size):
+        data = b('')
+        chunk_size = self.chunk_size
+        while size:
+            if not chunk_size:
+                chunk_size = self._read_header()
+
+            if size < chunk_size:
+                data += self.stream.read(size)
+                chunk_size -= size
+                break
+            else:
+                if not chunk_size:
+                    break
+                data += self.stream.read(chunk_size)
+                size -= chunk_size
+                chunk_size = 0
+
+        self.chunk_size = chunk_size
+        return data
+
+    def readline(self):
+        data = b('')
+        c = self.read(1)
+        while c and c != b('\n'):
+            data += c
+            c = self.read(1)
+        data += c
+        return data
+
+    def readlines(self):
+        yield self.readline()
+
+def get_method(method):
+
+    methods = dict(wsgi=WSGIWorker)
+    return methods[method.lower()]
+
+# Monolithic build...end of module: rocket\worker.py
+# Monolithic build...start of module: rocket\methods\__init__.py
+
+# Monolithic build...end of module: rocket\methods\__init__.py
+# Monolithic build...start of module: rocket\methods\wsgi.py
+
+# Import System Modules
+import sys
+import socket
+#from wsgiref.headers import Headers
+#from wsgiref.util import FileWrapper
+# Import Package Modules
+# package imports removed in monolithic build
+
+
+if PY3K:
+    from email.utils import formatdate
+else:
+    # Caps Utils for Py2.4 compatibility
+    from email.Utils import formatdate
+
+# Define Constants
+NEWLINE = b('\r\n')
+HEADER_RESPONSE = '''HTTP/1.1 %s\r\n%s'''
+BASE_ENV = {'SERVER_NAME': SERVER_NAME,
+            'SCRIPT_NAME': '',  # Direct call WSGI does not need a name
+            'wsgi.errors': sys.stderr,
+            'wsgi.version': (1, 0),
+            'wsgi.multiprocess': False,
+            'wsgi.run_once': False,
+            'wsgi.file_wrapper': FileWrapper
+            }
+
+class WSGIWorker(Worker):
+    def __init__(self, *args, **kwargs):
+        """Builds some instance variables that will last the life of the
+        thread."""
+        Worker.__init__(self, *args, **kwargs)
+
+        if isinstance(self.app_info, dict):
+            multithreaded = self.app_info.get('max_threads') != 1
+        else:
+            multithreaded = False
+        self.base_environ = dict({'SERVER_SOFTWARE': self.app_info['server_software'],
+                                  'wsgi.multithread': multithreaded,
+                                  })
+        self.base_environ.update(BASE_ENV)
+        # Grab our application
+        self.app = self.app_info.get('wsgi_app')
+
+        if not hasattr(self.app, "__call__"):
+            raise TypeError("The wsgi_app specified (%s) is not a valid WSGI application." % repr(self.app))
+
+
+    def build_environ(self, sock_file, conn):
+        """ Build the execution environment. """
+        # Grab the request line
+        request = self.read_request_line(sock_file)
+
+        # Copy the Base Environment
+        environ = self.base_environ.copy()
+
+        # Grab the headers
+        for k, v in self.read_headers(sock_file).items():
+            environ[str('HTTP_'+k)] = v
+
+        # Add CGI Variables
+        environ['REQUEST_METHOD'] = request['method']
+        environ['PATH_INFO'] = request['path']
+        environ['SERVER_PROTOCOL'] = request['protocol']
+        environ['SERVER_PORT'] = str(conn.server_port)
+        environ['REMOTE_PORT'] = str(conn.client_port)
+        environ['REMOTE_ADDR'] = str(conn.client_addr)
+        environ['QUERY_STRING'] = request['query_string']
+        if 'HTTP_CONTENT_LENGTH' in environ:
+            environ['CONTENT_LENGTH'] = environ['HTTP_CONTENT_LENGTH']
+        if 'HTTP_CONTENT_TYPE' in environ:
+            environ['CONTENT_TYPE'] = environ['HTTP_CONTENT_TYPE']
+
+        # Save the request method for later
+        self.request_method = environ['REQUEST_METHOD']
+
+        # Add Dynamic WSGI Variables
+        if conn.ssl:
+            environ['wsgi.url_scheme'] = 'https'
+            environ['HTTPS'] = 'on'
+        else:
+            environ['wsgi.url_scheme'] = 'http'
+
+        if environ.get('HTTP_TRANSFER_ENCODING', '') == 'chunked':
+            environ['wsgi.input'] = ChunkedReader(sock_file)
+        else:
+            environ['wsgi.input'] = sock_file
+
+        return environ
+
+    def send_headers(self, data, sections):
+        h_set = self.header_set
+
+        # Does the app want us to send output chunked?
+        self.chunked = h_set.get('transfer-encoding', '').lower() == 'chunked'
+
+        # Add a Date header if it's not there already
+        if not 'date' in h_set:
+            h_set['Date'] = formatdate(usegmt=True)
+
+        # Add a Server header if it's not there already
+        if not 'server' in h_set:
+            h_set['Server'] = HTTP_SERVER_SOFTWARE
+
+        if 'content-length' in h_set:
+            self.size = int(h_set['content-length'])
+        else:
+            s = int(self.status.split(' ')[0])
+            if s < 200 or s not in (204, 205, 304):
+                if not self.chunked:
+                    if sections == 1:
+                        # Add a Content-Length header if it's not there already
+                        h_set['Content-Length'] = str(len(data))
+                        self.size = len(data)
+                    else:
+                        # If they sent us more than one section, we blow chunks
+                        h_set['Transfer-Encoding'] = 'Chunked'
+                        self.chunked = True
+                        if __debug__:
+                            self.err_log.debug('Adding header...'
+                                               'Transfer-Encoding: Chunked')
+
+        if 'connection' not in h_set:
+            # If the application did not provide a connection header, fill it in
+            client_conn = self.environ.get('HTTP_CONNECTION', '').lower()
+            if self.environ['SERVER_PROTOCOL'] == 'HTTP/1.1':
+                # HTTP = 1.1 defaults to keep-alive connections
+                if client_conn:
+                    h_set['Connection'] = client_conn
+                else:
+                    h_set['Connection'] = 'keep-alive'
+            else:
+                # HTTP < 1.1 supports keep-alive but it's quirky so we don't support it
+                h_set['Connection'] = 'close'
+
+        # Close our connection if we need to.
+        self.closeConnection = h_set.get('connection', '').lower() == 'close'
+
+        # Build our output headers
+        header_data = HEADER_RESPONSE % (self.status, str(h_set))
+
+        # Send the headers
+        if __debug__:
+            self.err_log.debug('Sending Headers: %s' % repr(header_data))
+        self.conn.sendall(b(header_data))
+        self.headers_sent = True
+
+    def write_warning(self, data, sections=None):
+        self.err_log.warning('WSGI app called write method directly.  This is '
+                             'deprecated behavior.  Please update your app.')
+        return self.write(data, sections)
+
+    def write(self, data, sections=None):
+        """ Write the data to the output socket. """
+
+        if self.error[0]:
+            self.status = self.error[0]
+            data = b(self.error[1])
+
+        if not self.headers_sent:
+            self.send_headers(data, sections)
+
+        if self.request_method != 'HEAD':
+            try:
+                if self.chunked:
+                    self.conn.sendall(b('%x\r\n%s\r\n' % (len(data), data)))
+                else:
+                    self.conn.sendall(data)
+            except socket.error:
+                # But some clients will close the connection before that
+                # resulting in a socket error.
+                self.closeConnection = True
+
+    def start_response(self, status, response_headers, exc_info=None):
+        """ Store the HTTP status and headers to be sent when self.write is
+        called. """
+        if exc_info:
+            try:
+                if self.headers_sent:
+                    # Re-raise original exception if headers sent
+                    # because this violates WSGI specification.
+                    raise
+            finally:
+                exc_info = None
+        elif self.header_set:
+            raise AssertionError("Headers already set!")
+
+        if PY3K and not isinstance(status, str):
+            self.status = str(status, 'ISO-8859-1')
+        else:
+            self.status = status
+        # Make sure headers are bytes objects
+        try:
+            self.header_set = Headers(response_headers)
+        except UnicodeDecodeError:
+            self.error = ('500 Internal Server Error',
+                          'HTTP Headers should be bytes')
+            self.err_log.error('Received HTTP Headers from client that contain'
+                               ' invalid characters for Latin-1 encoding.')
+
+        return self.write_warning
+
+    def run_app(self, conn):
+        self.size = 0
+        self.header_set = Headers([])
+        self.headers_sent = False
+        self.error = (None, None)
+        self.chunked = False
+        sections = None
+        output = None
+
+        if __debug__:
+            self.err_log.debug('Getting sock_file')
+
+        # Build our file-like object
+        sock_file = conn.makefile('rb',BUF_SIZE)
+
+        try:
+            # Read the headers and build our WSGI environment
+            self.environ = environ = self.build_environ(sock_file, conn)
+
+            # Handle 100 Continue
+            if environ.get('HTTP_EXPECT', '') == '100-continue':
+                res = environ['SERVER_PROTOCOL'] + ' 100 Continue\r\n\r\n'
+                conn.sendall(b(res))
+
+            # Send it to our WSGI application
+            output = self.app(environ, self.start_response)
+
+            if not hasattr(output, '__len__') and not hasattr(output, '__iter__'):
+                self.error = ('500 Internal Server Error',
+                              'WSGI applications must return a list or '
+                              'generator type.')
+
+            if hasattr(output, '__len__'):
+                sections = len(output)
+
+            for data in output:
+                # Don't send headers until body appears
+                if data:
+                    self.write(data, sections)
+
+            if self.chunked:
+                # If chunked, send our final chunk length
+                self.conn.sendall(b('0\r\n\r\n'))
+            elif not self.headers_sent:
+                # Send headers if the body was empty
+                self.send_headers('', sections)
+
+        # Don't capture exceptions here.  The Worker class handles
+        # them appropriately.
+        finally:
+            if __debug__:
+                self.err_log.debug('Finally closing output and sock_file')
+
+            if hasattr(output,'close'):
+                output.close()
+
+            sock_file.close()
+
+# Monolithic build...end of module: rocket\methods\wsgi.py
+
+#
+# the following code is not part of Rocket but was added in web2py for testing purposes
+#
+
+def demo_app(environ, start_response):
+    global static_folder
+    import os
+    types = {'htm': 'text/html','html': 'text/html','gif': 'image/gif',
+             'jpg': 'image/jpeg','png': 'image/png','pdf': 'applications/pdf'}
+    if static_folder:
+        if not static_folder.startswith('/'):
+            static_folder = os.path.join(os.getcwd(),static_folder)
+        path = os.path.join(static_folder, environ['PATH_INFO'][1:] or 'index.html')
+        type = types.get(path.split('.')[-1],'text')
+        if os.path.exists(path):
+            try:
+                pathfile = open(path,'rb')
+                try:
+                    data = pathfile.read()
+                finally:
+                    pathfile.close()
+                start_response('200 OK', [('Content-Type', type)])
+            except IOError:
+                start_response('404 NOT FOUND', [])
+                data = '404 NOT FOUND'
+        else:
+            start_response('500 INTERNAL SERVER ERROR', [])
+            data = '500 INTERNAL SERVER ERROR'
+    else:
+        start_response('200 OK', [('Content-Type', 'text/html')])
+        data = '<html><body><h1>Hello from Rocket Web Server</h1></body></html>'
+    return [data]
+
+def demo():
+    from optparse import OptionParser
+    parser = OptionParser()
+    parser.add_option("-i", "--ip", dest="ip",default="127.0.0.1",
+                      help="ip address of the network interface")
+    parser.add_option("-p", "--port", dest="port",default="8000",
+                      help="post where to run web server")
+    parser.add_option("-s", "--static", dest="static",default=None,
+                      help="folder containing static files")
+    (options, args) = parser.parse_args()
+    global static_folder
+    static_folder = options.static
+    print 'Rocket running on %s:%s' % (options.ip, options.port)
+    r=Rocket((options.ip,int(options.port)),'wsgi', {'wsgi_app':demo_app})
+    r.start()
+
+if __name__=='__main__':
+    demo()
+

ADDED   gluon/sanitizer.py
Index: gluon/sanitizer.py
==================================================================
--- /dev/null
+++ gluon/sanitizer.py
@@ -0,0 +1,225 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+::
+
+    # from http://aspn.activestate.com/ASPN/Cookbook/Python/Recipe/496942
+    # Title: Cross-site scripting (XSS) defense
+    # Submitter: Josh Goldfoot (other recipes)
+    # Last Updated: 2006/08/05
+    # Version no: 1.0
+
+"""
+
+
+from htmllib import HTMLParser
+from cgi import escape
+from urlparse import urlparse
+from formatter import AbstractFormatter
+from htmlentitydefs import entitydefs
+from xml.sax.saxutils import quoteattr
+
+__all__ = ['sanitize']
+
+
+def xssescape(text):
+    """Gets rid of < and > and & and, for good measure, :"""
+
+    return escape(text, quote=True).replace(':', ':')
+
+
+class XssCleaner(HTMLParser):
+
+    def __init__(
+        self,
+        permitted_tags=[
+            'a',
+            'b',
+            'blockquote',
+            'br/',
+            'i',
+            'li',
+            'ol',
+            'ul',
+            'p',
+            'cite',
+            'code',
+            'pre',
+            'img/',
+            ],
+        allowed_attributes={'a': ['href', 'title'], 'img': ['src', 'alt'
+                            ], 'blockquote': ['type']},
+        fmt=AbstractFormatter,
+        strip_disallowed = False
+        ):
+
+        HTMLParser.__init__(self, fmt)
+        self.result = ''
+        self.open_tags = []
+        self.permitted_tags = [i for i in permitted_tags if i[-1] != '/']
+        self.requires_no_close = [i[:-1] for i in permitted_tags
+                                  if i[-1] == '/']
+        self.permitted_tags += self.requires_no_close
+        self.allowed_attributes = allowed_attributes
+
+        # The only schemes allowed in URLs (for href and src attributes).
+        # Adding "javascript" or "vbscript" to this list would not be smart.
+
+        self.allowed_schemes = ['http', 'https', 'ftp']
+
+        #to strip or escape disallowed tags?
+        self.strip_disallowed = strip_disallowed
+        self.in_disallowed = False
+
+    def handle_data(self, data):
+        if data and not self.in_disallowed:
+            self.result += xssescape(data)
+
+    def handle_charref(self, ref):
+        if self.in_disallowed:
+            return
+        elif len(ref) < 7 and ref.isdigit():
+            self.result += '&#%s;' % ref
+        else:
+            self.result += xssescape('&#%s' % ref)
+
+    def handle_entityref(self, ref):
+        if self.in_disallowed:
+            return
+        elif ref in entitydefs:
+            self.result += '&%s;' % ref
+        else:
+            self.result += xssescape('&%s' % ref)
+
+    def handle_comment(self, comment):
+        if self.in_disallowed:
+            return
+        elif comment:
+            self.result += xssescape('<!--%s-->' % comment)
+
+    def handle_starttag(
+        self,
+        tag,
+        method,
+        attrs,
+        ):
+        if tag not in self.permitted_tags:
+            if self.strip_disallowed:
+                self.in_disallowed = True
+            else:
+                self.result += xssescape('<%s>' % tag)
+        else:
+            bt = '<' + tag
+            if tag in self.allowed_attributes:
+                attrs = dict(attrs)
+                self.allowed_attributes_here = [x for x in
+                        self.allowed_attributes[tag] if x in attrs
+                         and len(attrs[x]) > 0]
+                for attribute in self.allowed_attributes_here:
+                    if attribute in ['href', 'src', 'background']:
+                        if self.url_is_acceptable(attrs[attribute]):
+                            bt += ' %s="%s"' % (attribute,
+                                    attrs[attribute])
+                    else:
+                        bt += ' %s=%s' % (xssescape(attribute),
+                                quoteattr(attrs[attribute]))
+            if bt == '<a' or bt == '<img':
+                return
+            if tag in self.requires_no_close:
+                bt += ' /'
+            bt += '>'
+            self.result += bt
+            self.open_tags.insert(0, tag)
+
+    def handle_endtag(self, tag, attrs):
+        bracketed = '</%s>' % tag
+        if tag not in self.permitted_tags:
+            if self.strip_disallowed:
+                self.in_disallowed = False
+            else:
+                self.result += xssescape(bracketed)
+        elif tag in self.open_tags:
+            self.result += bracketed
+            self.open_tags.remove(tag)
+
+    def unknown_starttag(self, tag, attributes):
+        self.handle_starttag(tag, None, attributes)
+
+    def unknown_endtag(self, tag):
+        self.handle_endtag(tag, None)
+
+    def url_is_acceptable(self, url):
+        """
+        Accepts relative and absolute urls
+        """
+
+        parsed = urlparse(url)
+        return (parsed[0] in self.allowed_schemes and '.' in parsed[1]) \
+            or (parsed[0] == '' and parsed[2].startswith('/'))
+
+    def strip(self, rawstring, escape=True):
+        """
+        Returns the argument stripped of potentially harmful
+        HTML or Javascript code
+
+        @type escape: boolean
+        @param escape: If True (default) it escapes the potentially harmful
+          content, otherwise remove it
+        """
+
+        if not isinstance(rawstring, str): return str(rawstring)
+        for tag in self.requires_no_close:
+            rawstring = rawstring.replace("<%s/>" % tag, "<%s />" % tag)
+        if not escape:
+            self.strip_disallowed = True
+        self.result = ''
+        self.feed(rawstring)
+        for endtag in self.open_tags:
+            if endtag not in self.requires_no_close:
+                self.result += '</%s>' % endtag
+        return self.result
+
+    def xtags(self):
+        """
+        Returns a printable string informing the user which tags are allowed
+        """
+
+        tg = ''
+        for x in sorted(self.permitted_tags):
+            tg += '<' + x
+            if x in self.allowed_attributes:
+                for y in self.allowed_attributes[x]:
+                    tg += ' %s=""' % y
+            tg += '> '
+        return xssescape(tg.strip())
+
+
+def sanitize(text, permitted_tags=[
+        'a',
+        'b',
+        'blockquote',
+        'br/',
+        'i',
+        'li',
+        'ol',
+        'ul',
+        'p',
+        'cite',
+        'code',
+        'pre',
+        'img/',
+        'h1','h2','h3','h4','h5','h6',
+        'table','tr','td','div',
+        ],
+             allowed_attributes = {
+        'a': ['href', 'title'],
+        'img': ['src', 'alt'],
+        'blockquote': ['type'],
+        'td': ['colspan'],
+        },
+             escape=True):
+    if not isinstance(text, str): return str(text)
+    return XssCleaner(permitted_tags=permitted_tags,
+                      allowed_attributes=allowed_attributes).strip(text, escape)
+

ADDED   gluon/serializers.py
Index: gluon/serializers.py
==================================================================
--- /dev/null
+++ gluon/serializers.py
@@ -0,0 +1,78 @@
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+"""
+import datetime
+from storage import Storage
+from html import TAG
+from html import xmlescape
+from languages import lazyT
+import contrib.simplejson as simplejson
+import contrib.rss2 as rss2
+
+def custom_json(o):
+    if hasattr(o,'custom_json') and callable(o.custom_json):
+        return o.custom_json()
+    if isinstance(o, (datetime.date,
+                      datetime.datetime,
+                      datetime.time)):
+        return o.isoformat()[:19].replace('T',' ')
+    elif isinstance(o, (int, long)):
+        return int(o)
+    elif isinstance(o, lazyT):
+        return str(o)
+    elif hasattr(o,'as_list') and callable(o.as_list):
+        return o.as_list()
+    elif hasattr(o,'as_dict') and callable(o.as_dict):
+        return o.as_dict()
+    else:
+        raise TypeError(repr(o) + " is not JSON serializable")
+
+
+def xml_rec(value, key):
+    if hasattr(value,'custom_xml') and callable(value.custom_xml):
+        return value.custom_xml()
+    elif isinstance(value, (dict, Storage)):
+        return TAG[key](*[TAG[k](xml_rec(v, '')) for k, v in value.items()])
+    elif isinstance(value, list):
+        return TAG[key](*[TAG.item(xml_rec(item, '')) for item in value])
+    elif hasattr(value,'as_list') and callable(value.as_list):
+        return str(xml_rec(value.as_list(),''))
+    elif hasattr(value,'as_dict') and callable(value.as_dict):
+        return str(xml_rec(value.as_dict(),''))
+    else:
+        return xmlescape(value)
+
+
+def xml(value, encoding='UTF-8', key='document'):
+    return ('<?xml version="1.0" encoding="%s"?>' % encoding) + str(xml_rec(value,key))
+
+
+def json(value,default=custom_json):
+    return simplejson.dumps(value,default=default)
+
+
+def csv(value):
+    return ''
+
+
+def rss(feed):
+    if not 'entries' in feed and 'items' in feed:
+        feed['entries'] = feed['items']
+    now=datetime.datetime.now()
+    rss = rss2.RSS2(title = feed['title'],
+                    link = str(feed['link']),
+                    description = feed['description'],
+                    lastBuildDate = feed.get('created_on', now),
+                    items = [rss2.RSSItem(\
+                                        title=entry['title'],
+                                        link=str(entry['link']),
+                                        description=entry['description'],
+                                        pubDate=entry.get('created_on', now)
+                                        )\
+                                    for entry in feed['entries']
+                                    ]
+                    )
+    return rss2.dumps(rss)
+

ADDED   gluon/settings.py
Index: gluon/settings.py
==================================================================
--- /dev/null
+++ gluon/settings.py
@@ -0,0 +1,11 @@
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+"""
+
+from storage import Storage
+
+global_settings = Storage()
+settings = global_settings  # legacy compatibility
+

ADDED   gluon/shell.py
Index: gluon/shell.py
==================================================================
--- /dev/null
+++ gluon/shell.py
@@ -0,0 +1,400 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Developed by Massimo Di Pierro <mdipierro@cs.depaul.edu>,
+limodou <limodou@gmail.com> and srackham <srackham@gmail.com>.
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+"""
+
+import os
+import sys
+import code
+import logging
+import types
+import re
+import optparse
+import glob
+
+import fileutils
+import settings
+from utils import web2py_uuid
+from compileapp import build_environment, read_pyc, run_models_in
+from restricted import RestrictedError
+from globals import Request, Response, Session
+from storage import Storage
+from admin import w2p_unpack
+
+
+logger = logging.getLogger("web2py")
+
+def exec_environment(
+    pyfile='',
+    request=None,
+    response=None,
+    session=None,
+    ):
+    """
+    .. function:: gluon.shell.exec_environment([pyfile=''[, request=Request()
+        [, response=Response[, session=Session()]]]])
+
+        Environment builder and module loader.
+
+
+        Builds a web2py environment and optionally executes a Python
+        file into the environment.
+        A Storage dictionary containing the resulting environment is returned.
+        The working directory must be web2py root -- this is the web2py default.
+
+    """
+
+    if request==None: request = Request()
+    if response==None: response = Response()
+    if session==None: session = Session()
+
+    if request.folder is None:
+        mo = re.match(r'(|.*/)applications/(?P<appname>[^/]+)', pyfile)
+        if mo:
+            appname = mo.group('appname')
+            request.folder = os.path.join('applications', appname)
+        else:
+            request.folder = ''
+    env = build_environment(request, response, session, store_current=False)
+    if pyfile:
+        pycfile = pyfile + 'c'
+        if os.path.isfile(pycfile):
+            exec read_pyc(pycfile) in env
+        else:
+            execfile(pyfile, env)
+    return Storage(env)
+
+
+def env(
+    a,
+    import_models=False,
+    c=None,
+    f=None,
+    dir='',
+    extra_request={},
+    ):
+    """
+    Return web2py execution environment for application (a), controller (c),
+    function (f).
+    If import_models is True the exec all application models into the
+    environment.
+
+    extra_request allows you to pass along any extra
+    variables to the request object before your models
+    get executed. This was mainly done to support
+    web2py_utils.test_runner, however you can use it
+    with any wrapper scripts that need access to the
+    web2py environment.
+    """
+
+    request = Request()
+    response = Response()
+    session = Session()
+    request.application = a
+
+    # Populate the dummy environment with sensible defaults.
+
+    if not dir:
+        request.folder = os.path.join('applications', a)
+    else:
+        request.folder = dir
+    request.controller = c or 'default'
+    request.function = f or 'index'
+    response.view = '%s/%s.html' % (request.controller,
+                                    request.function)
+    request.env.path_info = '/%s/%s/%s' % (a, c, f)
+    request.env.http_host = '127.0.0.1:8000'
+    request.env.remote_addr = '127.0.0.1'
+    request.env.web2py_runtime_gae = settings.global_settings.web2py_runtime_gae
+
+    for k,v in extra_request.items():
+        request[k] = v
+
+    # Monkey patch so credentials checks pass.
+
+    def check_credentials(request, other_application='admin'):
+        return True
+
+    fileutils.check_credentials = check_credentials
+
+    environment = build_environment(request, response, session)
+
+    if import_models:
+        try:
+            run_models_in(environment)
+        except RestrictedError, e:
+            sys.stderr.write(e.traceback+'\n')
+            sys.exit(1)
+
+    environment['__name__'] = '__main__'
+    return environment
+
+
+def exec_pythonrc():
+    pythonrc = os.environ.get('PYTHONSTARTUP')
+    if pythonrc and os.path.isfile(pythonrc):
+        try:
+            execfile(pythonrc)
+        except NameError:
+            pass
+
+
+def run(
+    appname,
+    plain=False,
+    import_models=False,
+    startfile=None,
+    bpython=False
+    ):
+    """
+    Start interactive shell or run Python script (startfile) in web2py
+    controller environment. appname is formatted like:
+
+    a      web2py application name
+    a/c    exec the controller c into the application environment
+    """
+
+    (a, c, f) = parse_path_info(appname)
+    errmsg = 'invalid application name: %s' % appname
+    if not a:
+        die(errmsg)
+    adir = os.path.join('applications', a)
+    if not os.path.exists(adir):
+        if raw_input('application %s does not exist, create (y/n)?'
+                      % a).lower() in ['y', 'yes']:
+            os.mkdir(adir)
+            w2p_unpack('welcome.w2p', adir)
+            for subfolder in ['models','views','controllers', 'databases',
+                              'modules','cron','errors','sessions',
+                              'languages','static','private','uploads']:
+                subpath =  os.path.join(adir,subfolder)
+                if not os.path.exists(subpath):
+                    os.mkdir(subpath)
+            db = os.path.join(adir,'models/db.py')
+            if os.path.exists(db):
+                data = fileutils.read_file(db)
+                data = data.replace('<your secret key>','sha512:'+web2py_uuid())
+                fileutils.write_file(db, data)
+
+    if c:
+        import_models = True
+    _env = env(a, c=c, import_models=import_models)
+    if c:
+        cfile = os.path.join('applications', a, 'controllers', c + '.py')
+        if not os.path.isfile(cfile):
+            cfile = os.path.join('applications', a, 'compiled', "controllers_%s_%s.pyc" % (c,f))
+            if not os.path.isfile(cfile):
+                die(errmsg)
+            else:
+                exec read_pyc(cfile) in _env
+        else:
+            execfile(cfile, _env)
+
+    if f:
+        exec ('print %s()' % f, _env)
+    elif startfile:
+        exec_pythonrc()
+        try:
+            execfile(startfile, _env)
+        except RestrictedError, e:
+            print e.traceback
+    else:
+        if not plain:
+            if bpython:
+                try:
+                    import bpython
+                    bpython.embed(locals_=_env)
+                    return
+                except:
+                    logger.warning(
+                        'import bpython error; trying ipython...')
+            else:
+                try:
+                    import IPython
+                    # following 2 lines fix a problem with IPython; thanks Michael Toomim
+                    if '__builtins__' in _env:
+                        del _env['__builtins__']
+                    shell = IPython.Shell.IPShell(argv=[], user_ns=_env)
+                    shell.mainloop()
+                    return
+                except:
+                    logger.warning(
+                        'import IPython error; use default python shell')
+        try:
+            import readline
+            import rlcompleter
+        except ImportError:
+            pass
+        else:
+            readline.set_completer(rlcompleter.Completer(_env).complete)
+            readline.parse_and_bind('tab:complete')
+        exec_pythonrc()
+        code.interact(local=_env)
+
+
+def parse_path_info(path_info):
+    """
+    Parse path info formatted like a/c/f where c and f are optional
+    and a leading / accepted.
+    Return tuple (a, c, f). If invalid path_info a is set to None.
+    If c or f are omitted they are set to None.
+    """
+
+    mo = re.match(r'^/?(?P<a>\w+)(/(?P<c>\w+)(/(?P<f>\w+))?)?$',
+                  path_info)
+    if mo:
+        return (mo.group('a'), mo.group('c'), mo.group('f'))
+    else:
+        return (None, None, None)
+
+
+def die(msg):
+    print >> sys.stderr, msg
+    sys.exit(1)
+
+
+def test(testpath, import_models=True, verbose=False):
+    """
+    Run doctests in web2py environment. testpath is formatted like:
+
+    a      tests all controllers in application a
+    a/c    tests controller c in application a
+    a/c/f  test function f in controller c, application a
+
+    Where a, c and f are application, controller and function names
+    respectively. If the testpath is a file name the file is tested.
+    If a controller is specified models are executed by default.
+    """
+
+    import doctest
+    if os.path.isfile(testpath):
+        mo = re.match(r'(|.*/)applications/(?P<a>[^/]+)', testpath)
+        if not mo:
+            die('test file is not in application directory: %s'
+                 % testpath)
+        a = mo.group('a')
+        c = f = None
+        files = [testpath]
+    else:
+        (a, c, f) = parse_path_info(testpath)
+        errmsg = 'invalid test path: %s' % testpath
+        if not a:
+            die(errmsg)
+        cdir = os.path.join('applications', a, 'controllers')
+        if not os.path.isdir(cdir):
+            die(errmsg)
+        if c:
+            cfile = os.path.join(cdir, c + '.py')
+            if not os.path.isfile(cfile):
+                die(errmsg)
+            files = [cfile]
+        else:
+            files = glob.glob(os.path.join(cdir, '*.py'))
+    for testfile in files:
+        globs = env(a, import_models)
+        ignores = globs.keys()
+        execfile(testfile, globs)
+
+        def doctest_object(name, obj):
+            """doctest obj and enclosed methods and classes."""
+
+            if type(obj) in (types.FunctionType, types.TypeType,
+                             types.ClassType, types.MethodType,
+                             types.UnboundMethodType):
+
+                # Reload environment before each test.
+
+                globs = env(a, c=c, f=f, import_models=import_models)
+                execfile(testfile, globs)
+                doctest.run_docstring_examples(obj, globs=globs,
+                        name='%s: %s' % (os.path.basename(testfile),
+                        name), verbose=verbose)
+                if type(obj) in (types.TypeType, types.ClassType):
+                    for attr_name in dir(obj):
+
+                        # Execute . operator so decorators are executed.
+
+                        o = eval('%s.%s' % (name, attr_name), globs)
+                        doctest_object(attr_name, o)
+
+        for (name, obj) in globs.items():
+            if name not in ignores and (f is None or f == name):
+                doctest_object(name, obj)
+
+
+def get_usage():
+    usage = """
+  %prog [options] pythonfile
+"""
+    return usage
+
+
+def execute_from_command_line(argv=None):
+    if argv is None:
+        argv = sys.argv
+
+    parser = optparse.OptionParser(usage=get_usage())
+
+    parser.add_option('-S', '--shell', dest='shell', metavar='APPNAME',
+        help='run web2py in interactive shell or IPython(if installed) ' + \
+            'with specified appname')
+    msg = 'run web2py in interactive shell or bpython (if installed) with'
+    msg += ' specified appname (if app does not exist it will be created).'
+    msg += '\n Use combined with --shell'
+    parser.add_option(
+        '-B',
+        '--bpython',
+        action='store_true',
+        default=False,
+        dest='bpython',
+        help=msg,
+        )
+    parser.add_option(
+        '-P',
+        '--plain',
+        action='store_true',
+        default=False,
+        dest='plain',
+        help='only use plain python shell, should be used with --shell option',
+        )
+    parser.add_option(
+        '-M',
+        '--import_models',
+        action='store_true',
+        default=False,
+        dest='import_models',
+        help='auto import model files, default is False, ' + \
+            ' should be used with --shell option',
+        )
+    parser.add_option(
+        '-R',
+        '--run',
+        dest='run',
+        metavar='PYTHON_FILE',
+        default='',
+        help='run PYTHON_FILE in web2py environment, ' + \
+            'should be used with --shell option',
+        )
+
+    (options, args) = parser.parse_args(argv[1:])
+
+    if len(sys.argv) == 1:
+        parser.print_help()
+        sys.exit(0)
+
+    if len(args) > 0:
+        startfile = args[0]
+    else:
+        startfile = ''
+    run(options.shell, options.plain, startfile=startfile, bpython=options.bpython)
+
+
+if __name__ == '__main__':
+    execute_from_command_line()
+

ADDED   gluon/sql.py
Index: gluon/sql.py
==================================================================
--- /dev/null
+++ gluon/sql.py
@@ -0,0 +1,6 @@
+# this file exists for backward compatibility
+
+__all__ = ['DAL','Field','drivers']
+
+from dal import DAL, Field, Table, Query, Set, Expression, Row, Rows, drivers, BaseAdapter, SQLField, SQLTable, SQLXorable, SQLQuery, SQLSet, SQLRows, SQLStorage, SQLDB, GQLDB, SQLALL, SQLCustomType
+

ADDED   gluon/sqlhtml.py
Index: gluon/sqlhtml.py
==================================================================
--- /dev/null
+++ gluon/sqlhtml.py
@@ -0,0 +1,1530 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+Holds:
+
+- SQLFORM: provide a form for a table (with/without record)
+- SQLTABLE: provides a table for a set of records
+- form_factory: provides a SQLFORM for an non-db backed table
+
+"""
+
+from http import HTTP
+from html import XML, SPAN, TAG, A, DIV, UL, LI, TEXTAREA, BR, IMG, SCRIPT
+from html import FORM, INPUT, LABEL, OPTION, SELECT
+from html import TABLE, THEAD, TBODY, TR, TD, TH
+from html import URL as Url
+from dal import DAL, Table, Row, CALLABLETYPES
+from storage import Storage
+from utils import md5_hash
+from validators import IS_EMPTY_OR
+
+import urllib
+import re
+import cStringIO
+
+
+table_field = re.compile('[\w_]+\.[\w_]+')
+widget_class = re.compile('^\w*')
+
+def represent(field,value,record):
+    f = field.represent
+    if not callable(f):
+        return str(value)
+    n = f.func_code.co_argcount-len(f.func_defaults or [])
+    if n==1:
+        return f(value)
+    elif n==2:
+        return f(value,record)
+    else:
+        raise RuntimeError, "field representation must take 1 or 2 args"
+
+def safe_int(x):
+    try:
+        return int(x)
+    except ValueError:
+        return 0
+
+def safe_float(x):
+    try:
+        return float(x)
+    except ValueError:
+        return 0
+
+class FormWidget(object):
+    """
+    helper for SQLFORM to generate form input fields (widget),
+    related to the fieldtype
+    """
+
+    @staticmethod
+    def _attributes(field, widget_attributes, **attributes):
+        """
+        helper to build a common set of attributes
+
+        :param field: the field involved, some attributes are derived from this
+        :param widget_attributes:  widget related attributes
+        :param attributes: any other supplied attributes
+        """
+        attr = dict(
+            _id = '%s_%s' % (field._tablename, field.name),
+            _class = widget_class.match(str(field.type)).group(),
+            _name = field.name,
+            requires = field.requires,
+            )
+        attr.update(widget_attributes)
+        attr.update(attributes)
+        return attr
+
+    @staticmethod
+    def widget(field, value, **attributes):
+        """
+        generates the widget for the field.
+
+        When serialized, will provide an INPUT tag:
+
+        - id = tablename_fieldname
+        - class = field.type
+        - name = fieldname
+
+        :param field: the field needing the widget
+        :param value: value
+        :param attributes: any other attributes to be applied
+        """
+
+        raise NotImplementedError
+
+class StringWidget(FormWidget):
+
+    @staticmethod
+    def widget(field, value, **attributes):
+        """
+        generates an INPUT text tag.
+
+        see also: :meth:`FormWidget.widget`
+        """
+
+        default = dict(
+            _type = 'text',
+            value = (value!=None and str(value)) or '',
+            )
+        attr = StringWidget._attributes(field, default, **attributes)
+
+        return INPUT(**attr)
+
+
+class IntegerWidget(StringWidget):
+
+    pass
+
+
+class DoubleWidget(StringWidget):
+
+    pass
+
+
+class DecimalWidget(StringWidget):
+
+    pass
+
+
+class TimeWidget(StringWidget):
+
+    pass
+
+
+class DateWidget(StringWidget):
+
+    pass
+
+
+class DatetimeWidget(StringWidget):
+
+    pass
+
+
+class TextWidget(FormWidget):
+
+    @staticmethod
+    def widget(field, value, **attributes):
+        """
+        generates a TEXTAREA tag.
+
+        see also: :meth:`FormWidget.widget`
+        """
+
+        default = dict(
+            value = value,
+            )
+        attr = TextWidget._attributes(field, default, **attributes)
+
+        return TEXTAREA(**attr)
+
+
+class BooleanWidget(FormWidget):
+
+    @staticmethod
+    def widget(field, value, **attributes):
+        """
+        generates an INPUT checkbox tag.
+
+        see also: :meth:`FormWidget.widget`
+        """
+
+        default=dict(
+            _type='checkbox',
+            value=value,
+            )
+        attr = BooleanWidget._attributes(field, default, **attributes)
+
+        return INPUT(**attr)
+
+
+class OptionsWidget(FormWidget):
+
+    @staticmethod
+    def has_options(field):
+        """
+        checks if the field has selectable options
+
+        :param field: the field needing checking
+        :returns: True if the field has options
+        """
+
+        return hasattr(field.requires, 'options')
+
+    @staticmethod
+    def widget(field, value, **attributes):
+        """
+        generates a SELECT tag, including OPTIONs (only 1 option allowed)
+
+        see also: :meth:`FormWidget.widget`
+        """
+        default = dict(
+            value=value,
+            )
+        attr = OptionsWidget._attributes(field, default, **attributes)
+
+        requires = field.requires
+        if not isinstance(requires, (list, tuple)):
+            requires = [requires]
+        if requires:
+            if hasattr(requires[0], 'options'):
+                options = requires[0].options()
+            else:
+                raise SyntaxError, 'widget cannot determine options of %s' \
+                    % field
+        opts = [OPTION(v, _value=k) for (k, v) in options]
+
+        return SELECT(*opts, **attr)
+
+class ListWidget(StringWidget):
+    @staticmethod
+    def widget(field,value,**attributes):
+        _id = '%s_%s' % (field._tablename, field.name)
+        _name = field.name
+        if field.type=='list:integer': _class = 'integer'
+        else: _class = 'string'
+        items=[LI(INPUT(_id=_id,_class=_class,_name=_name,value=v,hideerror=True)) \
+                   for v in value or ['']]
+        script=SCRIPT("""
+// from http://refactormycode.com/codes/694-expanding-input-list-using-jquery
+(function(){
+jQuery.fn.grow_input = function() {
+  return this.each(function() {
+    var ul = this;
+    jQuery(ul).find(":text").after('<a href="javascript:void(0)>+</a>').keypress(function (e) { return (e.which == 13) ? pe(ul) : true; }).next().click(function(){ pe(ul) });
+  });
+};
+function pe(ul) {
+  var new_line = ml(ul);
+  rel(ul);
+  new_line.appendTo(ul);
+  new_line.find(":text").focus();
+  return false;
+}
+function ml(ul) {
+  var line = jQuery(ul).find("li:first").clone(true);
+  line.find(':text').val('');
+  return line;
+}
+function rel(ul) {
+  jQuery(ul).find("li").each(function() {
+    var trimmed = jQuery.trim(jQuery(this.firstChild).val());
+    if (trimmed=='') jQuery(this).remove(); else jQuery(this.firstChild).val(trimmed);
+  });
+}
+})();
+jQuery(document).ready(function(){jQuery('#%s_grow_input').grow_input();});
+""" % _id)
+        attributes['_id']=_id+'_grow_input'
+        return TAG[''](UL(*items,**attributes),script)
+
+
+class MultipleOptionsWidget(OptionsWidget):
+
+    @staticmethod
+    def widget(field, value, size=5, **attributes):
+        """
+        generates a SELECT tag, including OPTIONs (multiple options allowed)
+
+        see also: :meth:`FormWidget.widget`
+
+        :param size: optional param (default=5) to indicate how many rows must
+            be shown
+        """
+
+        attributes.update(dict(_size=size, _multiple=True))
+
+        return OptionsWidget.widget(field, value, **attributes)
+
+
+class RadioWidget(OptionsWidget):
+
+    @staticmethod
+    def widget(field, value, **attributes):
+        """
+        generates a TABLE tag, including INPUT radios (only 1 option allowed)
+
+        see also: :meth:`FormWidget.widget`
+        """
+
+        attr = OptionsWidget._attributes(field, {}, **attributes)
+
+        requires = field.requires
+        if not isinstance(requires, (list, tuple)):
+            requires = [requires]
+        if requires:
+            if hasattr(requires[0], 'options'):
+                options = requires[0].options()
+            else:
+                raise SyntaxError, 'widget cannot determine options of %s' \
+                    % field
+
+        options = [(k, v) for k, v in options if str(v)]
+        opts = []
+        cols = attributes.get('cols',1)
+        totals = len(options)
+        mods = totals%cols
+        rows = totals/cols
+        if mods:
+            rows += 1
+
+        for r_index in range(rows):
+            tds = []
+            for k, v in options[r_index*cols:(r_index+1)*cols]:
+                tds.append(TD(INPUT(_type='radio', _name=field.name,
+                         requires=attr.get('requires',None),
+                         hideerror=True, _value=k,
+                         value=value), v))
+            opts.append(TR(tds))
+
+        if opts:
+            opts[-1][0][0]['hideerror'] = False
+        return TABLE(*opts, **attr)
+
+
+class CheckboxesWidget(OptionsWidget):
+
+    @staticmethod
+    def widget(field, value, **attributes):
+        """
+        generates a TABLE tag, including INPUT checkboxes (multiple allowed)
+
+        see also: :meth:`FormWidget.widget`
+        """
+
+        # was values = re.compile('[\w\-:]+').findall(str(value))
+        if isinstance(value, (list, tuple)):
+            values = [str(v) for v in value]
+        else:
+            values = [str(value)]
+
+        attr = OptionsWidget._attributes(field, {}, **attributes)
+
+        requires = field.requires
+        if not isinstance(requires, (list, tuple)):
+            requires = [requires]
+        if requires:
+            if hasattr(requires[0], 'options'):
+                options = requires[0].options()
+            else:
+                raise SyntaxError, 'widget cannot determine options of %s' \
+                    % field
+
+        options = [(k, v) for k, v in options if k != '']
+        opts = []
+        cols = attributes.get('cols', 1)
+        totals = len(options)
+        mods = totals % cols
+        rows = totals / cols
+        if mods:
+            rows += 1
+
+        for r_index in range(rows):
+            tds = []
+            for k, v in options[r_index*cols:(r_index+1)*cols]:
+                if k in values:
+                    r_value = k
+                else:
+                    r_value = []
+                tds.append(TD(INPUT(_type='checkbox', _name=field.name,
+                         requires=attr.get('requires', None),
+                         hideerror=True, _value=k,
+                         value=r_value), v))
+            opts.append(TR(tds))
+
+        if opts:
+            opts[-1][0][0]['hideerror'] = False
+        return TABLE(*opts, **attr)
+
+
+class PasswordWidget(FormWidget):
+
+    DEFAULT_PASSWORD_DISPLAY = 8*('*')
+
+    @staticmethod
+    def widget(field, value, **attributes):
+        """
+        generates a INPUT password tag.
+        If a value is present it will be shown as a number of '*', not related
+        to the length of the actual value.
+
+        see also: :meth:`FormWidget.widget`
+        """
+
+        default=dict(
+            _type='password',
+            _value=(value and PasswordWidget.DEFAULT_PASSWORD_DISPLAY) or '',
+            )
+        attr = PasswordWidget._attributes(field, default, **attributes)
+
+        return INPUT(**attr)
+
+
+class UploadWidget(FormWidget):
+
+    DEFAULT_WIDTH = '150px'
+    ID_DELETE_SUFFIX = '__delete'
+    GENERIC_DESCRIPTION = 'file'
+    DELETE_FILE = 'delete'
+
+    @staticmethod
+    def widget(field, value, download_url=None, **attributes):
+        """
+        generates a INPUT file tag.
+
+        Optionally provides an A link to the file, including a checkbox so
+        the file can be deleted.
+        All is wrapped in a DIV.
+
+        see also: :meth:`FormWidget.widget`
+
+        :param download_url: Optional URL to link to the file (default = None)
+        """
+
+        default=dict(
+            _type='file',
+            )
+        attr = UploadWidget._attributes(field, default, **attributes)
+
+        inp = INPUT(**attr)
+
+        if download_url and value:
+            url = download_url + '/' + value
+            (br, image) = ('', '')
+            if UploadWidget.is_image(value):
+                br = BR()
+                image = IMG(_src = url, _width = UploadWidget.DEFAULT_WIDTH)
+
+            requires = attr["requires"]
+            if requires == [] or isinstance(requires, IS_EMPTY_OR):
+                inp = DIV(inp, '[',
+                          A(UploadWidget.GENERIC_DESCRIPTION, _href = url),
+                          '|',
+                          INPUT(_type='checkbox',
+                                _name=field.name + UploadWidget.ID_DELETE_SUFFIX),
+                          UploadWidget.DELETE_FILE,
+                          ']', br, image)
+            else:
+                inp = DIV(inp, '[',
+                          A(UploadWidget.GENERIC_DESCRIPTION, _href = url),
+                          ']', br, image)
+        return inp
+
+    @staticmethod
+    def represent(field, value, download_url=None):
+        """
+        how to represent the file:
+
+        - with download url and if it is an image: <A href=...><IMG ...></A>
+        - otherwise with download url: <A href=...>file</A>
+        - otherwise: file
+
+        :param field: the field
+        :param value: the field value
+        :param download_url: url for the file download (default = None)
+        """
+
+        inp = UploadWidget.GENERIC_DESCRIPTION
+
+        if download_url and value:
+            url = download_url + '/' + value
+            if UploadWidget.is_image(value):
+                inp = IMG(_src = url, _width = UploadWidget.DEFAULT_WIDTH)
+            inp = A(inp, _href = url)
+
+        return inp
+
+    @staticmethod
+    def is_image(value):
+        """
+        Tries to check if the filename provided references to an image
+
+        Checking is based on filename extension. Currently recognized:
+           gif, png, jp(e)g, bmp
+
+        :param value: filename
+        """
+
+        extension = value.split('.')[-1].lower()
+        if extension in ['gif', 'png', 'jpg', 'jpeg', 'bmp']:
+            return True
+        return False
+
+
+class AutocompleteWidget(object):
+
+    def __init__(self, request, field, id_field=None, db=None,
+                 orderby=None, limitby=(0,10),
+                 keyword='_autocomplete_%(fieldname)s',
+                 min_length=2):
+        self.request = request
+        self.keyword = keyword % dict(fieldname=field.name)
+        self.db = db or field._db
+        self.orderby = orderby
+        self.limitby = limitby
+        self.min_length = min_length
+        self.fields=[field]
+        if id_field:
+            self.is_reference = True
+            self.fields.append(id_field)
+        else:
+            self.is_reference = False
+        if hasattr(request,'application'):
+            self.url = Url(r=request, args=request.args)
+            self.callback()
+        else:
+            self.url = request
+    def callback(self):
+        if self.keyword in self.request.vars:
+            field = self.fields[0]
+            rows = self.db(field.like(self.request.vars[self.keyword]+'%'))\
+                .select(orderby=self.orderby,limitby=self.limitby,*self.fields)
+            if rows:
+                if self.is_reference:
+                    id_field = self.fields[1]
+                    raise HTTP(200,SELECT(_id=self.keyword,_class='autocomplete',
+                                          _size=len(rows),_multiple=(len(rows)==1),
+                                          *[OPTION(s[field.name],_value=s[id_field.name],
+                                                   _selected=(k==0)) \
+                                                for k,s in enumerate(rows)]).xml())
+                else:
+                    raise HTTP(200,SELECT(_id=self.keyword,_class='autocomplete',
+                                          _size=len(rows),_multiple=(len(rows)==1),
+                                          *[OPTION(s[field.name],
+                                                   _selected=(k==0)) \
+                                                for k,s in enumerate(rows)]).xml())
+            else:
+
+                raise HTTP(200,'')
+    def __call__(self,field,value,**attributes):
+        default = dict(
+            _type = 'text',
+            value = (value!=None and str(value)) or '',
+            )
+        attr = StringWidget._attributes(field, default, **attributes)
+        div_id = self.keyword+'_div'
+        attr['_autocomplete']='off'
+        if self.is_reference:
+            key2 = self.keyword+'_aux'
+            key3 = self.keyword+'_auto'
+            attr['_class']='string'
+            name = attr['_name']
+            if 'requires' in attr: del attr['requires']
+            attr['_name'] = key2
+            value = attr['value']
+            record = self.db(self.fields[1]==value).select(self.fields[0]).first()
+            attr['value'] = record and record[self.fields[0].name]
+            attr['_onblur']="jQuery('#%(div_id)s').delay(3000).fadeOut('slow');" % \
+                dict(div_id=div_id,u='F'+self.keyword)
+            attr['_onkeyup'] = "jQuery('#%(key3)s').val('');var e=event.which?event.which:event.keyCode; function %(u)s(){jQuery('#%(id)s').val(jQuery('#%(key)s :selected').text());jQuery('#%(key3)s').val(jQuery('#%(key)s').val())}; if(e==39) %(u)s(); else if(e==40) {if(jQuery('#%(key)s option:selected').next().length)jQuery('#%(key)s option:selected').attr('selected',null).next().attr('selected','selected'); %(u)s();} else if(e==38) {if(jQuery('#%(key)s option:selected').prev().length)jQuery('#%(key)s option:selected').attr('selected',null).prev().attr('selected','selected'); %(u)s();} else if(jQuery('#%(id)s').val().length>=%(min_length)s) jQuery.get('%(url)s?%(key)s='+escape(jQuery('#%(id)s').val()),function(data){if(data=='')jQuery('#%(key3)s').val('');else{jQuery('#%(id)s').next('.error').hide();jQuery('#%(div_id)s').html(data).show().focus();jQuery('#%(div_id)s select').css('width',jQuery('#%(id)s').css('width'));jQuery('#%(key3)s').val(jQuery('#%(key)s').val());jQuery('#%(key)s').change(%(u)s);jQuery('#%(key)s').click(%(u)s);};}); else jQuery('#%(div_id)s').fadeOut('slow');" % \
+                dict(url=self.url,min_length=self.min_length,
+                     key=self.keyword,id=attr['_id'],key2=key2,key3=key3,
+                     name=name,div_id=div_id,u='F'+self.keyword)
+            if self.min_length==0:
+                attr['_onfocus'] = attr['_onkeyup']
+            return TAG[''](INPUT(**attr),INPUT(_type='hidden',_id=key3,_value=value,
+                                               _name=name,requires=field.requires),
+                           DIV(_id=div_id,_style='position:absolute;'))
+        else:
+            attr['_name']=field.name
+            attr['_onblur']="jQuery('#%(div_id)s').delay(3000).fadeOut('slow');" % \
+                dict(div_id=div_id,u='F'+self.keyword)
+            attr['_onkeyup'] = "var e=event.which?event.which:event.keyCode; function %(u)s(){jQuery('#%(id)s').val(jQuery('#%(key)s').val())}; if(e==39) %(u)s(); else if(e==40) {if(jQuery('#%(key)s option:selected').next().length)jQuery('#%(key)s option:selected').attr('selected',null).next().attr('selected','selected'); %(u)s();} else if(e==38) {if(jQuery('#%(key)s option:selected').prev().length)jQuery('#%(key)s option:selected').attr('selected',null).prev().attr('selected','selected'); %(u)s();} else if(jQuery('#%(id)s').val().length>=%(min_length)s) jQuery.get('%(url)s?%(key)s='+escape(jQuery('#%(id)s').val()),function(data){jQuery('#%(id)s').next('.error').hide();jQuery('#%(div_id)s').html(data).show().focus();jQuery('#%(div_id)s select').css('width',jQuery('#%(id)s').css('width'));jQuery('#%(key)s').change(%(u)s);jQuery('#%(key)s').click(%(u)s);}); else jQuery('#%(div_id)s').fadeOut('slow');" % \
+                dict(url=self.url,min_length=self.min_length,
+                     key=self.keyword,id=attr['_id'],div_id=div_id,u='F'+self.keyword)
+            if self.min_length==0:
+                attr['_onfocus'] = attr['_onkeyup']
+            return TAG[''](INPUT(**attr),DIV(_id=div_id,_style='position:absolute;'))
+
+
+class SQLFORM(FORM):
+
+    """
+    SQLFORM is used to map a table (and a current record) into an HTML form
+
+    given a SQLTable stored in db.table
+
+    generates an insert form::
+
+        SQLFORM(db.table)
+
+    generates an update form::
+
+        record=db.table[some_id]
+        SQLFORM(db.table, record)
+
+    generates an update with a delete button::
+
+        SQLFORM(db.table, record, deletable=True)
+
+    if record is an int::
+
+        record=db.table[record]
+
+    optional arguments:
+
+    :param fields: a list of fields that should be placed in the form,
+        default is all.
+    :param labels: a dictionary with labels for each field, keys are the field
+        names.
+    :param col3: a dictionary with content for an optional third column
+            (right of each field). keys are field names.
+    :param linkto: the URL of a controller/function to access referencedby
+        records
+            see controller appadmin.py for examples
+    :param upload: the URL of a controller/function to download an uploaded file
+            see controller appadmin.py for examples
+
+    any named optional attribute is passed to the <form> tag
+            for example _class, _id, _style, _action, _method, etc.
+
+    """
+
+    # usability improvements proposal by fpp - 4 May 2008 :
+    # - correct labels (for points to field id, not field name)
+    # - add label for delete checkbox
+    # - add translatable label for record ID
+    # - add third column to right of fields, populated from the col3 dict
+
+    widgets = Storage(dict(
+        string = StringWidget,
+        text = TextWidget,
+        password = PasswordWidget,
+        integer = IntegerWidget,
+        double = DoubleWidget,
+        decimal = DecimalWidget,
+        time = TimeWidget,
+        date = DateWidget,
+        datetime = DatetimeWidget,
+        upload = UploadWidget,
+        boolean = BooleanWidget,
+        blob = None,
+        options = OptionsWidget,
+        multiple = MultipleOptionsWidget,
+        radio = RadioWidget,
+        checkboxes = CheckboxesWidget,
+        autocomplete = AutocompleteWidget,
+        list = ListWidget,
+        ))
+
+    FIELDNAME_REQUEST_DELETE = 'delete_this_record'
+    FIELDKEY_DELETE_RECORD = 'delete_record'
+    ID_LABEL_SUFFIX = '__label'
+    ID_ROW_SUFFIX = '__row'
+
+    def __init__(
+        self,
+        table,
+        record = None,
+        deletable = False,
+        linkto = None,
+        upload = None,
+        fields = None,
+        labels = None,
+        col3 = {},
+        submit_button = 'Submit',
+        delete_label = 'Check to delete:',
+        showid = True,
+        readonly = False,
+        comments = True,
+        keepopts = [],
+        ignore_rw = False,
+        record_id = None,
+        formstyle = 'table3cols',
+        buttons = ['submit'],
+        separator = ': ',
+        **attributes
+        ):
+        """
+        SQLFORM(db.table,
+               record=None,
+               fields=['name'],
+               labels={'name': 'Your name'},
+               linkto=URL(r=request, f='table/db/')
+        """
+
+        self.ignore_rw = ignore_rw
+        self.formstyle = formstyle
+        nbsp = XML(' ') # Firefox2 does not display fields with blanks
+        FORM.__init__(self, *[], **attributes)
+        ofields = fields
+        keyed = hasattr(table,'_primarykey')
+
+        # if no fields are provided, build it from the provided table
+        # will only use writable or readable fields, unless forced to ignore
+        if fields == None:
+            fields = [f.name for f in table if (ignore_rw or f.writable or f.readable) and not f.compute]
+        self.fields = fields
+
+        # make sure we have an id
+        if self.fields[0] != table.fields[0] and \
+                isinstance(table,Table) and not keyed:
+            self.fields.insert(0, table.fields[0])
+
+        self.table = table
+
+        # try to retrieve the indicated record using its id
+        # otherwise ignore it
+        if record and isinstance(record, (int, long, str, unicode)):
+            if not str(record).isdigit():
+                raise HTTP(404, "Object not found")
+            record = table._db(table._id == record).select().first()
+            if not record:
+                raise HTTP(404, "Object not found")
+        self.record = record
+
+        self.record_id = record_id
+        if keyed:
+            if record:
+                self.record_id = dict([(k,record[k]) for k in table._primarykey])
+            else:
+                self.record_id = dict([(k,None) for k in table._primarykey])
+        self.field_parent = {}
+        xfields = []
+        self.fields = fields
+        self.custom = Storage()
+        self.custom.dspval = Storage()
+        self.custom.inpval = Storage()
+        self.custom.label = Storage()
+        self.custom.comment = Storage()
+        self.custom.widget = Storage()
+        self.custom.linkto = Storage()
+
+        sep = separator or ''
+        
+        for fieldname in self.fields:
+            if fieldname.find('.') >= 0:
+                continue
+
+            field = self.table[fieldname]
+            comment = None
+
+            if comments:
+                comment = col3.get(fieldname, field.comment)
+            if comment == None:
+                comment = ''
+            self.custom.comment[fieldname] = comment
+
+            if labels != None and fieldname in labels:
+                label = labels[fieldname]
+            else:
+                label = field.label
+            self.custom.label[fieldname] = label
+
+            field_id = '%s_%s' % (table._tablename, fieldname)
+
+            label = LABEL(label, sep, _for=field_id,
+                          _id=field_id+SQLFORM.ID_LABEL_SUFFIX)
+
+            row_id = field_id+SQLFORM.ID_ROW_SUFFIX
+            if field.type == 'id':
+                self.custom.dspval.id = nbsp
+                self.custom.inpval.id = ''
+                widget = ''
+                if record:
+                    if showid and 'id' in fields and field.readable:
+                        v = record['id']
+                        widget = SPAN(v, _id=field_id)
+                        self.custom.dspval.id = str(v)
+                        xfields.append((row_id,label, widget,comment))
+                    self.record_id = str(record['id'])
+                self.custom.widget.id = widget
+                continue
+
+            if readonly and not ignore_rw and not field.readable:
+                continue
+
+            if record:
+                default = record[fieldname]
+            else:
+                default = field.default
+                if isinstance(default,CALLABLETYPES):
+                    default=default()
+
+            cond = readonly or \
+                (not ignore_rw and not field.writable and field.readable)
+
+            if default and not cond:
+                default = field.formatter(default)
+            dspval = default
+            inpval = default
+
+            if cond:
+
+                # ## if field.represent is available else
+                # ## ignore blob and preview uploaded images
+                # ## format everything else
+
+                if field.represent:
+                    inp = represent(field,default,record)
+                elif field.type in ['blob']:
+                    continue
+                elif field.type == 'upload':
+                    inp = UploadWidget.represent(field, default, upload)
+                elif field.type == 'boolean':
+                    inp = self.widgets.boolean.widget(field, default, _disabled=True)
+                else:
+                    inp = field.formatter(default)
+            elif field.type == 'upload':
+                if hasattr(field, 'widget') and field.widget:
+                    inp = field.widget(field, default, upload)
+                else:
+                    inp = self.widgets.upload.widget(field, default, upload)
+            elif hasattr(field, 'widget') and field.widget:
+                inp = field.widget(field, default)
+            elif field.type == 'boolean':
+                inp = self.widgets.boolean.widget(field, default)
+                if default:
+                    inpval = 'checked'
+                else:
+                    inpval = ''
+            elif OptionsWidget.has_options(field):
+                if not field.requires.multiple:
+                    inp = self.widgets.options.widget(field, default)
+                else:
+                    inp = self.widgets.multiple.widget(field, default)
+                if fieldname in keepopts:
+                    inpval = TAG[''](*inp.components)
+            elif field.type.startswith('list:'):
+                inp = self.widgets.list.widget(field,default)
+            elif field.type == 'text':
+                inp = self.widgets.text.widget(field, default)
+            elif field.type == 'password':
+                inp = self.widgets.password.widget(field, default)
+                if self.record:
+                    dspval = PasswordWidget.DEFAULT_PASSWORD_DISPLAY
+                else:
+                    dspval = ''
+            elif field.type == 'blob':
+                continue
+            else:
+                inp = self.widgets.string.widget(field, default)
+
+            xfields.append((row_id,label,inp,comment))
+            self.custom.dspval[fieldname] = dspval or nbsp
+            self.custom.inpval[fieldname] = inpval or ''
+            self.custom.widget[fieldname] = inp
+
+        # if a record is provided and found, as is linkto
+        # build a link
+        if record and linkto:
+            db = linkto.split('/')[-1]
+            for (rtable, rfield) in table._referenced_by:
+                if keyed:
+                    rfld = table._db[rtable][rfield]
+                    query = urllib.quote('%s.%s==%s' % (db,rfld,record[rfld.type[10:].split('.')[1]]))
+                else:
+                    query = urllib.quote('%s.%s==%s' % (db,table._db[rtable][rfield],record.id))
+                lname = olname = '%s.%s' % (rtable, rfield)
+                if ofields and not olname in ofields:
+                    continue
+                if labels and lname in labels:
+                    lname = labels[lname]
+                widget = A(lname,
+                           _class='reference',
+                           _href='%s/%s?query=%s' % (linkto, rtable, query))
+                xfields.append((olname.replace('.', '__')+SQLFORM.ID_ROW_SUFFIX,
+                                '',widget,col3.get(olname,'')))
+                self.custom.linkto[olname.replace('.', '__')] = widget
+#                 </block>
+
+        # when deletable, add delete? checkbox
+        self.custom.deletable = ''
+        if record and deletable:
+            widget = INPUT(_type='checkbox',
+                            _class='delete',
+                            _id=self.FIELDKEY_DELETE_RECORD,
+                            _name=self.FIELDNAME_REQUEST_DELETE,
+                            )
+            xfields.append((self.FIELDKEY_DELETE_RECORD+SQLFORM.ID_ROW_SUFFIX,
+                            LABEL(
+                                delete_label,
+                                _for=self.FIELDKEY_DELETE_RECORD,
+                                _id=self.FIELDKEY_DELETE_RECORD+SQLFORM.ID_LABEL_SUFFIX),
+                            widget,
+                            col3.get(self.FIELDKEY_DELETE_RECORD, '')))
+            self.custom.deletable = widget
+        # when writable, add submit button
+        self.custom.submit = ''
+        if (not readonly) and ('submit' in buttons):
+            widget = INPUT(_type='submit',
+                           _value=submit_button)
+            xfields.append(('submit_record'+SQLFORM.ID_ROW_SUFFIX,
+                            '', widget,col3.get('submit_button', '')))
+            self.custom.submit = widget
+        # if a record is provided and found
+        # make sure it's id is stored in the form
+        if record:
+            if not self['hidden']:
+                self['hidden'] = {}
+            if not keyed:
+                self['hidden']['id'] = record['id']
+
+        (begin, end) = self._xml()
+        self.custom.begin = XML("<%s %s>" % (self.tag, begin))
+        self.custom.end = XML("%s</%s>" % (end, self.tag))
+        table = self.createform(xfields)
+        self.components = [table]
+
+    def createform(self, xfields):
+        if self.formstyle == 'table3cols':
+            table = TABLE()
+            for id,a,b,c in xfields:
+                td_b = self.field_parent[id] = TD(b,_class='w2p_fw')
+                table.append(TR(TD(a,_class='w2p_fl'),
+                                td_b,
+                                TD(c,_class='w2p_fc'),_id=id))
+        elif self.formstyle == 'table2cols':
+            table = TABLE()
+            for id,a,b,c in xfields:
+                td_b = self.field_parent[id] = TD(b,_class='w2p_fw',_colspan="2")
+                table.append(TR(TD(a,_class='w2p_fl'),
+                                TD(c,_class='w2p_fc'),_id=id
+                                +'1',_class='even'))
+                table.append(TR(td_b,_id=id+'2',_class='odd'))
+        elif self.formstyle == 'divs':
+            table = TAG['']()
+            for id,a,b,c in xfields:
+                div_b = self.field_parent[id] = DIV(b,_class='w2p_fw')
+                table.append(DIV(DIV(a,_class='w2p_fl'),
+                                 div_b,
+                                 DIV(c,_class='w2p_fc'),_id=id))
+        elif self.formstyle == 'ul':
+            table = UL()
+            for id,a,b,c in xfields:
+                div_b = self.field_parent[id] = DIV(b,_class='w2p_fw')
+                table.append(LI(DIV(a,_class='w2p_fl'),
+                                div_b,
+                                DIV(c,_class='w2p_fc'),_id=id))
+        elif type(self.formstyle) == type(lambda:None):
+            table = TABLE()
+            for id,a,b,c in xfields:
+                td_b = self.field_parent[id] = TD(b,_class='w2p_fw')
+                newrows = self.formstyle(id,a,td_b,c)
+                if type(newrows).__name__ != "tuple":
+                    newrows = [newrows]
+                for newrow in newrows:
+                    table.append(newrow)
+        else:
+            raise RuntimeError, 'formstyle not supported'
+        return table
+
+
+    def accepts(
+        self,
+        request_vars,
+        session=None,
+        formname='%(tablename)s/%(record_id)s',
+        keepvalues=False,
+        onvalidation=None,
+        dbio=True,
+        hideerror=False,
+        detect_record_change=False,
+        ):
+
+        """
+        similar FORM.accepts but also does insert, update or delete in DAL.
+        but if detect_record_change == True than:
+          form.record_changed = False (record is properly validated/submitted)
+          form.record_changed = True (record cannot be submitted because changed)
+        elseif detect_record_change == False than:
+          form.record_changed = None
+        """
+
+        if request_vars.__class__.__name__ == 'Request':
+            request_vars = request_vars.post_vars
+
+        keyed = hasattr(self.table, '_primarykey')
+
+        # implement logic to detect whether record exist but has been modified
+        # server side
+        self.record_changed = None
+        if detect_record_change:
+            if self.record:
+                self.record_changed = False
+                serialized = '|'.join(str(self.record[k]) for k in self.table.fields())
+                self.record_hash = md5_hash(serialized)
+
+        # logic to deal with record_id for keyed tables
+        if self.record:
+            if keyed:
+                formname_id = '.'.join(str(self.record[k])
+                                       for k in self.table._primarykey
+                                       if hasattr(self.record,k))
+                record_id = dict((k, request_vars[k]) for k in self.table._primarykey)
+            else:
+                (formname_id, record_id) = (self.record.id,
+                                            request_vars.get('id', None))
+            keepvalues = True
+        else:
+            if keyed:
+                formname_id = 'create'
+                record_id = dict([(k, None) for k in self.table._primarykey])
+            else:
+                (formname_id, record_id) = ('create', None)
+
+        if not keyed and isinstance(record_id, (list, tuple)):
+            record_id = record_id[0]
+
+        if formname:
+            formname = formname % dict(tablename = self.table._tablename,
+                                       record_id = formname_id)
+
+        # ## THIS IS FOR UNIQUE RECORDS, read IS_NOT_IN_DB
+
+        for fieldname in self.fields:
+            field = self.table[fieldname]
+            requires = field.requires or []
+            if not isinstance(requires, (list, tuple)):
+                requires = [requires]
+            [item.set_self_id(self.record_id) for item in requires
+            if hasattr(item, 'set_self_id') and self.record_id]
+
+        # ## END
+
+        fields = {}
+        for key in self.vars:
+            fields[key] = self.vars[key]
+
+        ret = FORM.accepts(
+            self,
+            request_vars,
+            session,
+            formname,
+            keepvalues,
+            onvalidation,
+            hideerror=hideerror,
+            )
+
+        if not ret and self.record and self.errors:
+            ### if there are errors in update mode
+            # and some errors refers to an already uploaded file
+            # delete error if
+            # - user not trying to upload a new file
+            # - there is existing file and user is not trying to delete it
+            # this is because removing the file may not pass validation
+            for key in self.errors.keys():
+                if key in self.table \
+                        and self.table[key].type == 'upload' \
+                        and request_vars.get(key, None) in (None, '') \
+                        and self.record[key] \
+                        and not key + UploadWidget.ID_DELETE_SUFFIX in request_vars:
+                    del self.errors[key]
+            if not self.errors:
+                ret = True
+
+        requested_delete = \
+            request_vars.get(self.FIELDNAME_REQUEST_DELETE, False)
+
+        self.custom.end = TAG[''](self.hidden_fields(), self.custom.end)
+
+        auch = record_id and self.errors and requested_delete
+
+        # auch is true when user tries to delete a record
+        # that does not pass validation, yet it should be deleted
+
+        if not ret and not auch:
+            for fieldname in self.fields:
+                field = self.table[fieldname]
+                ### this is a workaround! widgets should always have default not None!
+                if not field.widget and field.type.startswith('list:') and \
+                        not OptionsWidget.has_options(field):
+                    field.widget = self.widgets.list.widget
+                if hasattr(field, 'widget') and field.widget and fieldname in request_vars:
+                    if fieldname in self.vars:
+                        value = self.vars[fieldname]
+                    elif self.record:
+                        value = self.record[fieldname]
+                    else:
+                        value = self.table[fieldname].default
+                    row_id = '%s_%s%s' % (self.table, fieldname, SQLFORM.ID_ROW_SUFFIX)
+                    widget = field.widget(field, value)
+                    self.field_parent[row_id].components = [ widget ]
+                    if not field.type.startswith('list:'):
+                        self.field_parent[row_id]._traverse(False, hideerror)
+                    self.custom.widget[ fieldname ] = widget
+            return ret
+
+        if record_id and str(record_id) != str(self.record_id):
+            raise SyntaxError, 'user is tampering with form\'s record_id: ' \
+                '%s != %s' % (record_id, self.record_id)
+
+        if record_id and dbio:
+            if keyed:
+                self.vars.update(record_id)
+            else:
+                self.vars.id = self.record.id
+
+        if requested_delete and self.custom.deletable:
+            if dbio:
+                if keyed:
+                    qry = reduce(lambda x, y: x & y,
+                                 [self.table[k] == record_id[k] for k in self.table._primarykey])
+                else:
+                    qry = self.table._id == self.record.id
+                self.table._db(qry).delete()
+            self.errors.clear()
+            for component in self.elements('input, select, textarea'):
+                component['_disabled'] = True
+            return True
+
+        for fieldname in self.fields:
+            if not fieldname in self.table.fields:
+                continue
+
+            if not self.ignore_rw and not self.table[fieldname].writable:
+                ### this happens because FORM has no knowledge of writable
+                ### and thinks that a missing boolean field is a None
+                if self.table[fieldname].type == 'boolean' and \
+                    self.vars.get(fieldname, True) == None:
+                    del self.vars[fieldname]
+                continue
+
+            field = self.table[fieldname]
+            if field.type == 'id':
+                continue
+            if field.type == 'boolean':
+                if self.vars.get(fieldname, False):
+                    self.vars[fieldname] = fields[fieldname] = True
+                else:
+                    self.vars[fieldname] = fields[fieldname] = False
+            elif field.type == 'password' and self.record\
+                and request_vars.get(fieldname, None) == \
+                    PasswordWidget.DEFAULT_PASSWORD_DISPLAY:
+                continue  # do not update if password was not changed
+            elif field.type == 'upload':
+                f = self.vars[fieldname]
+                fd = '%s__delete' % fieldname
+                if f == '' or f == None:
+                    if self.vars.get(fd, False) or not self.record:
+                        fields[fieldname] = ''
+                    else:
+                        fields[fieldname] = self.record[fieldname]
+                    self.vars[fieldname] = fields[fieldname]
+                    continue
+                elif hasattr(f, 'file'):
+                    (source_file, original_filename) = (f.file, f.filename)
+                elif isinstance(f, (str, unicode)):
+                    ### do not know why this happens, it should not
+                    (source_file, original_filename) = \
+                        (cStringIO.StringIO(f), 'file.txt')
+                newfilename = field.store(source_file, original_filename)
+                # this line is for backward compatibility only
+                self.vars['%s_newfilename' % fieldname] = newfilename
+                fields[fieldname] = newfilename
+                if isinstance(field.uploadfield, str):
+                    fields[field.uploadfield] = source_file.read()
+                # proposed by Hamdy (accept?) do we need fields at this point?
+                self.vars[fieldname] = fields[fieldname]
+                continue
+            elif fieldname in self.vars:
+                fields[fieldname] = self.vars[fieldname]
+            elif field.default == None and field.type != 'blob':
+                self.errors[fieldname] = 'no data'
+                return False
+            value = fields.get(fieldname,None)
+            if field.type == 'list:string':
+                if not isinstance(value, (tuple, list)):
+                    fields[fieldname] = value and [value] or []
+            elif isinstance(field.type,str) and field.type.startswith('list:'):
+                if not isinstance(value, list):
+                    fields[fieldname] = [safe_int(x) for x in (value and [value] or [])]
+            elif field.type == 'integer':
+                if value != None:
+                    fields[fieldname] = safe_int(value)
+            elif field.type.startswith('reference'):
+                if value != None and isinstance(self.table, Table) and not keyed:
+                    fields[fieldname] = safe_int(value)
+            elif field.type == 'double':
+                if value != None:
+                    fields[fieldname] = safe_float(value)
+
+        for fieldname in self.vars:
+            if fieldname != 'id' and fieldname in self.table.fields\
+                 and not fieldname in fields and not fieldname\
+                 in request_vars:
+                fields[fieldname] = self.vars[fieldname]
+
+        if dbio:            
+            if 'delete_this_record' in fields:
+                # this should never happen but seems to happen to some
+                del fields['delete_this_record']
+            for field in self.table:
+                if not field.name in fields and field.writable==False:
+                    if record_id:
+                        fields[field.name] = self.record[field.name]
+                    elif self.table[field.name].default!=None:
+                        fields[field.name] = self.table[field.name].default
+            if keyed:
+                if reduce(lambda x, y: x and y, record_id.values()): # if record_id
+                    if fields:
+                        qry = reduce(lambda x, y: x & y,
+                            [self.table[k] == self.record[k] for k in self.table._primarykey])
+                        self.table._db(qry).update(**fields)
+                else:
+                    pk = self.table.insert(**fields)
+                    if pk:
+                        self.vars.update(pk)
+                    else:
+                        ret = False
+            else:
+                if record_id:
+                    self.vars.id = self.record.id
+                    if fields:
+                        self.table._db(self.table._id == self.record.id).update(**fields)
+                else:
+                    self.vars.id = self.table.insert(**fields)
+        return ret
+
+    @staticmethod
+    def factory(*fields, **attributes):
+        """
+        generates a SQLFORM for the given fields.
+
+        Internally will build a non-database based data model
+        to hold the fields.
+        """
+        # Define a table name, this way it can be logical to our CSS.
+        # And if you switch from using SQLFORM to SQLFORM.factory
+        # your same css definitions will still apply.
+
+        table_name = attributes.get('table_name', 'no_table')
+
+        # So it won't interfear with SQLDB.define_table
+        if 'table_name' in attributes:
+            del attributes['table_name']
+
+        return SQLFORM(DAL(None).define_table(table_name, *fields), **attributes)
+
+
+class SQLTABLE(TABLE):
+
+    """
+    given a Rows object, as returned by a db().select(), generates
+    an html table with the rows.
+
+    optional arguments:
+
+    :param linkto: URL (or lambda to generate a URL) to edit individual records
+    :param upload: URL to download uploaded files
+    :param orderby: Add an orderby link to column headers.
+    :param headers: dictionary of headers to headers redefinions
+                    headers can also be a string to gerenare the headers from data
+                    for now only headers="fieldname:capitalize",
+                    headers="labels" and headers=None are supported
+    :param truncate: length at which to truncate text in table cells.
+        Defaults to 16 characters.
+    :param columns: a list or dict contaning the names of the columns to be shown
+        Defaults to all
+
+    Optional names attributes for passed to the <table> tag
+
+    The keys of headers and columns must be of the form "tablename.fieldname"
+
+    Simple linkto example::
+
+        rows = db.select(db.sometable.ALL)
+        table = SQLTABLE(rows, linkto='someurl')
+
+    This will link rows[id] to .../sometable/value_of_id
+
+
+    More advanced linkto example::
+
+        def mylink(field, type, ref):
+            return URL(r=request, args=[field])
+
+        rows = db.select(db.sometable.ALL)
+        table = SQLTABLE(rows, linkto=mylink)
+
+    This will link rows[id] to
+        current_app/current_controlle/current_function/value_of_id
+        
+    New Implements: 24 June 2011:
+    -----------------------------
+    
+    :param selectid: The id you want to select
+    :param renderstyle: Boolean render the style with the table
+    
+    :param extracolums = [{'label':A('Extra',_href='#'),
+                    'class': '', #class name of the header
+                    'width':'', #width in pixels or %
+                    'content':lambda row, rc: A('Edit',_href='edit/%s'%row.id),                     
+                    'selected': False #agregate class selected to this column
+                    }]
+                    
+                    
+    :param headers = {'table.id':{'label':'Id',
+                           'class':'', #class name of the header
+                           'width':'', #width in pixels or %
+                           'truncate': 16, #truncate the content to...
+                           'selected': False #agregate class selected to this column
+                           }, 
+               'table.myfield':{'label':'My field',
+                                'class':'', #class name of the header
+                                'width':'', #width in pixels or %
+                                'truncate': 16, #truncate the content to...
+                                'selected': False #agregate class selected to this column
+                                },
+               }
+               
+    table = SQLTABLE(rows, headers=headers, extracolums=extracolums)
+
+
+    """
+
+    def __init__(
+        self,
+        sqlrows,
+        linkto=None,
+        upload=None,
+        orderby=None,
+        headers={},
+        truncate=16,
+        columns=None,        
+        th_link='',
+        extracolumns=None,
+        selectid=None,
+        renderstyle=False,
+        **attributes
+        ):
+
+        TABLE.__init__(self, **attributes)
+        self.components = []
+        self.attributes = attributes
+        self.sqlrows = sqlrows
+        (components, row) = (self.components, [])
+        if not sqlrows:
+            return
+        if not columns:
+            columns = sqlrows.colnames
+        if headers=='fieldname:capitalize':
+            headers = {}
+            for c in columns:
+                headers[c] = ' '.join([w.capitalize() for w in c.split('.')[-1].split('_')])
+        elif headers=='labels':
+            headers = {}
+            for c in columns:
+                (t,f) = c.split('.')
+                field = sqlrows.db[t][f]
+                headers[c] = field.label
+        if headers!=None:
+            for c in columns:#new implement dict
+                if isinstance(headers.get(c, c), dict):
+                    coldict = headers.get(c, c)
+                    attrcol = dict()
+                    if coldict['width']!="":
+                        attrcol.update(_width=coldict['width'])
+                    if coldict['class']!="":
+                        attrcol.update(_class=coldict['class'])
+                    row.append(TH(coldict['label'],**attrcol))
+                elif orderby:
+                    row.append(TH(A(headers.get(c, c),
+                                    _href=th_link+'?orderby=' + c)))
+                else:
+                    row.append(TH(headers.get(c, c)))
+                    
+            if extracolumns:#new implement dict
+                for c in extracolumns:
+                    attrcol = dict()
+                    if c['width']!="":
+                        attrcol.update(_width=c['width'])
+                    if c['class']!="":
+                        attrcol.update(_class=c['class'])
+                    row.append(TH(c['label'],**attrcol))
+                    
+            components.append(THEAD(TR(*row)))
+        
+
+        tbody = []
+        for (rc, record) in enumerate(sqlrows):
+            row = []
+            if rc % 2 == 0:
+                _class = 'even'
+            else:
+                _class = 'odd'
+                
+            if selectid!=None:#new implement
+                if record.id==selectid:
+                    _class += ' rowselected'
+                    
+            for colname in columns:
+                if not table_field.match(colname):
+                    if "_extra" in record and colname in record._extra:
+                        r = record._extra[colname]
+                        row.append(TD(r))
+                        continue
+                    else:
+                        raise KeyError("Column %s not found (SQLTABLE)" % colname)
+                (tablename, fieldname) = colname.split('.')
+                try:
+                    field = sqlrows.db[tablename][fieldname]
+                except KeyError:
+                    field = None
+                if tablename in record \
+                        and isinstance(record,Row) \
+                        and isinstance(record[tablename],Row):
+                    r = record[tablename][fieldname]
+                elif fieldname in record:
+                    r = record[fieldname]
+                else:
+                    raise SyntaxError, 'something wrong in Rows object'
+                r_old = r
+                if not field:
+                    pass
+                elif linkto and field.type == 'id':
+                    try:
+                        href = linkto(r, 'table', tablename)
+                    except TypeError:
+                        href = '%s/%s/%s' % (linkto, tablename, r_old)
+                    r = A(r, _href=href)
+                elif field.type.startswith('reference'):
+                    if linkto:
+                        ref = field.type[10:]
+                        try:
+                            href = linkto(r, 'reference', ref)
+                        except TypeError:
+                            href = '%s/%s/%s' % (linkto, ref, r_old)
+                            if ref.find('.') >= 0:
+                                tref,fref = ref.split('.')
+                                if hasattr(sqlrows.db[tref],'_primarykey'):
+                                    href = '%s/%s?%s' % (linkto, tref, urllib.urlencode({fref:r}))
+                        r = A(represent(field,r,record), _href=str(href))
+                    elif field.represent:
+                        r = represent(field,r,record)
+                elif linkto and hasattr(field._table,'_primarykey') and fieldname in field._table._primarykey:
+                    # have to test this with multi-key tables
+                    key = urllib.urlencode(dict( [ \
+                                ((tablename in record \
+                                      and isinstance(record, Row) \
+                                      and isinstance(record[tablename], Row)) and
+                                 (k, record[tablename][k])) or (k, record[k]) \
+                                    for k in field._table._primarykey ] ))
+                    r = A(r, _href='%s/%s?%s' % (linkto, tablename, key))
+                elif field.type.startswith('list:'):
+                    r = represent(field,r or [],record)
+                elif field.represent:
+                    r = represent(field,r,record)
+                elif field.type == 'blob' and r:
+                    r = 'DATA'
+                elif field.type == 'upload':
+                    if upload and r:
+                        r = A('file', _href='%s/%s' % (upload, r))
+                    elif r:
+                        r = 'file'
+                    else:
+                        r = ''
+                elif field.type in ['string','text']:
+                    r = str(field.formatter(r))
+                    ur = unicode(r, 'utf8')                    
+                    if headers!={}: #new implement dict
+                        if isinstance(headers[colname],dict):
+                            if isinstance(headers[colname]['truncate'], int) \
+                                    and len(ur)>headers[colname]['truncate']:
+                                r = ur[:headers[colname]['truncate'] - 3]
+                                r = r.encode('utf8') + '...'
+                    elif truncate!=None and len(ur) > truncate:
+                        r = ur[:truncate - 3].encode('utf8') + '...'
+                        
+                attrcol = dict()#new implement dict
+                if headers!={}:
+                    if isinstance(headers[colname],dict):
+                        colclass=headers[colname]['class']
+                        if headers[colname]['selected']:
+                            colclass= str(headers[colname]['class'] + " colselected").strip()
+                        if colclass!="":
+                            attrcol.update(_class=colclass)
+                        
+                row.append(TD(r,**attrcol))
+                
+            if extracolumns:#new implement dict
+                for c in extracolumns:
+                    attrcol = dict()
+                    colclass=c['class']
+                    if c['selected']:
+                        colclass= str(c['class'] + " colselected").strip()
+                    if colclass!="":
+                        attrcol.update(_class=colclass)
+                    contentfunc = c['content']
+                    row.append(TD(contentfunc(record, rc),**attrcol))
+                    
+            tbody.append(TR(_class=_class, *row))
+            
+        if renderstyle:
+            components.append(STYLE(self.style()))
+        
+        components.append(TBODY(*tbody))
+        
+    
+    def style(self):
+        
+        css = '''
+        table tbody tr.odd {
+            background-color: #DFD;
+        }
+        table tbody tr.even {
+            background-color: #EFE;
+        }
+        table tbody tr.rowselected {
+            background-color: #FDD;
+        }
+        table tbody tr td.colselected {
+            background-color: #FDD;
+        }
+        table tbody tr:hover {
+            background: #DDF;
+        }
+        '''
+        
+        return css
+
+form_factory = SQLFORM.factory # for backward compatibility, deprecated
+
+

ADDED   gluon/storage.py
Index: gluon/storage.py
==================================================================
--- /dev/null
+++ gluon/storage.py
@@ -0,0 +1,224 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+Provides:
+
+- List; like list but returns None instead of IndexOutOfBounds
+- Storage; like dictionary allowing also for `obj.foo` for `obj['foo']`
+"""
+
+import cPickle
+import portalocker
+
+__all__ = ['List', 'Storage', 'Settings', 'Messages',
+           'StorageList', 'load_storage', 'save_storage']
+
+
+class List(list):
+    """
+    Like a regular python list but a[i] if i is out of bounds return None
+    instead of IndexOutOfBounds
+    """
+
+    def __call__(self, i, default=None):
+        if 0<=i<len(self):
+            return self[i]
+        else:
+            return default
+
+class Storage(dict):
+
+    """
+    A Storage object is like a dictionary except `obj.foo` can be used
+    in addition to `obj['foo']`.
+
+        >>> o = Storage(a=1)
+        >>> print o.a
+        1
+
+        >>> o['a']
+        1
+
+        >>> o.a = 2
+        >>> print o['a']
+        2
+
+        >>> del o.a
+        >>> print o.a
+        None
+
+    """
+
+    def __getattr__(self, key):
+        if key in self:
+            return self[key]
+        else:
+            return None
+
+    def __setattr__(self, key, value):
+        if value == None:
+            if key in self:
+                del self[key]
+        else:
+            self[key] = value
+
+    def __delattr__(self, key):
+        if key in self:
+            del self[key]
+        else:
+            raise AttributeError, "missing key=%s" % key
+
+    def __repr__(self):
+        return '<Storage ' + dict.__repr__(self) + '>'
+
+    def __getstate__(self):
+        return dict(self)
+
+    def __setstate__(self, value):
+        for (k, v) in value.items():
+            self[k] = v
+
+    def getlist(self, key):
+        """Return a Storage value as a list.
+
+        If the value is a list it will be returned as-is.
+        If object is None, an empty list will be returned.
+        Otherwise, [value] will be returned.
+
+        Example output for a query string of ?x=abc&y=abc&y=def
+        >>> request = Storage()
+        >>> request.vars = Storage()
+        >>> request.vars.x = 'abc'
+        >>> request.vars.y = ['abc', 'def']
+        >>> request.vars.getlist('x')
+        ['abc']
+        >>> request.vars.getlist('y')
+        ['abc', 'def']
+        >>> request.vars.getlist('z')
+        []
+
+        """
+        value = self.get(key, None)
+        if isinstance(value, (list, tuple)):
+            return value
+        elif value is None:
+            return []
+        return [value]
+
+    def getfirst(self, key):
+        """Return the first or only value when given a request.vars-style key.
+
+        If the value is a list, its first item will be returned;
+        otherwise, the value will be returned as-is.
+
+        Example output for a query string of ?x=abc&y=abc&y=def
+        >>> request = Storage()
+        >>> request.vars = Storage()
+        >>> request.vars.x = 'abc'
+        >>> request.vars.y = ['abc', 'def']
+        >>> request.vars.getfirst('x')
+        'abc'
+        >>> request.vars.getfirst('y')
+        'abc'
+        >>> request.vars.getfirst('z')
+
+        """
+        value = self.getlist(key)
+        if len(value):
+            return value[0]
+        return None
+
+    def getlast(self, key):
+        """Returns the last or only single value when given a request.vars-style key.
+
+        If the value is a list, the last item will be returned;
+        otherwise, the value will be returned as-is.
+
+        Simulated output with a query string of ?x=abc&y=abc&y=def
+        >>> request = Storage()
+        >>> request.vars = Storage()
+        >>> request.vars.x = 'abc'
+        >>> request.vars.y = ['abc', 'def']
+        >>> request.vars.getlast('x')
+        'abc'
+        >>> request.vars.getlast('y')
+        'def'
+        >>> request.vars.getlast('z')
+
+        """
+        value = self.getlist(key)
+        if len(value):
+            return value[-1]
+        return None
+
+class StorageList(Storage):
+    """
+    like Storage but missing elements default to [] instead of None
+    """
+    def __getattr__(self, key):
+        if key in self:
+            return self[key]
+        else:
+            self[key] = []
+            return self[key]
+
+def load_storage(filename):
+    fp = open(filename, 'rb')
+    try:
+        portalocker.lock(fp, portalocker.LOCK_EX)
+        storage = cPickle.load(fp)
+        portalocker.unlock(fp)
+    finally:
+        fp.close()
+    return Storage(storage)
+
+
+def save_storage(storage, filename):
+    fp = open(filename, 'wb')
+    try:
+        portalocker.lock(fp, portalocker.LOCK_EX)
+        cPickle.dump(dict(storage), fp)
+        portalocker.unlock(fp)
+    finally:
+        fp.close()
+
+
+class Settings(Storage):
+
+    def __setattr__(self, key, value):
+        if key != 'lock_keys' and self.get('lock_keys', None)\
+             and not key in self:
+            raise SyntaxError, 'setting key \'%s\' does not exist' % key
+        if key != 'lock_values' and self.get('lock_values', None):
+            raise SyntaxError, 'setting value cannot be changed: %s' % key
+        self[key] = value
+
+
+class Messages(Storage):
+
+    def __init__(self, T):
+        self['T'] = T
+
+    def __setattr__(self, key, value):
+        if key != 'lock_keys' and self.get('lock_keys', None)\
+             and not key in self:
+            raise SyntaxError, 'setting key \'%s\' does not exist' % key
+        if key != 'lock_values' and self.get('lock_values', None):
+            raise SyntaxError, 'setting value cannot be changed: %s' % key
+        self[key] = value
+
+    def __getattr__(self, key):
+        value = self[key]
+        if isinstance(value, str):
+            return str(self['T'](value))
+        return value
+
+if __name__ == '__main__':
+    import doctest
+    doctest.testmod()
+

ADDED   gluon/streamer.py
Index: gluon/streamer.py
==================================================================
--- /dev/null
+++ gluon/streamer.py
@@ -0,0 +1,109 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro <mdipierro@cs.depaul.edu>
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+"""
+
+import os
+import stat
+import time
+import re
+import errno
+import rewrite
+from http import HTTP
+from contenttype import contenttype
+
+
+regex_start_range = re.compile('\d+(?=\-)')
+regex_stop_range = re.compile('(?<=\-)\d+')
+
+DEFAULT_CHUNK_SIZE = 64*1024
+
+def streamer(stream, chunk_size = DEFAULT_CHUNK_SIZE, bytes = None):
+    offset = 0
+    while bytes == None or offset < bytes:
+        if bytes != None and bytes - offset < chunk_size:
+            chunk_size = bytes - offset
+        data = stream.read(chunk_size)
+        length = len(data)
+        if not length:
+            break
+        else:
+            yield data
+        if length < chunk_size:
+            break
+        offset += length
+    stream.close()
+
+def stream_file_or_304_or_206(
+    static_file,
+    chunk_size = DEFAULT_CHUNK_SIZE,
+    request = None,
+    headers = {},
+    error_message = None,
+    ):
+    if error_message is None:
+        error_message = rewrite.thread.routes.error_message % 'invalid request'
+    try:
+        fp = open(static_file)
+    except IOError, e:
+        if e[0] == errno.EISDIR:
+            raise HTTP(403, error_message, web2py_error='file is a directory')
+        elif e[0] == errno.EACCES:
+            raise HTTP(403, error_message, web2py_error='inaccessible file')
+        else:
+            raise HTTP(404, error_message, web2py_error='invalid file')
+    else:
+        fp.close()
+    stat_file = os.stat(static_file)
+    fsize = stat_file[stat.ST_SIZE]
+    mtime = time.strftime('%a, %d %b %Y %H:%M:%S GMT',
+                          time.gmtime(stat_file[stat.ST_MTIME]))
+    headers['Content-Type'] = contenttype(static_file)
+    headers['Last-Modified'] = mtime
+    headers['Pragma'] = 'cache'
+    headers['Cache-Control'] = 'private'
+
+    if request and request.env.http_if_modified_since == mtime:
+        raise HTTP(304, **{'Content-Type': headers['Content-Type']})
+
+    elif request and request.env.http_range:
+        start_items = regex_start_range.findall(request.env.http_range)
+        if not start_items:
+            start_items = [0]
+        stop_items = regex_stop_range.findall(request.env.http_range)
+        if not stop_items or int(stop_items[0]) > fsize - 1:
+            stop_items = [fsize - 1]
+        part = (int(start_items[0]), int(stop_items[0]), fsize)
+        bytes = part[1] - part[0] + 1
+        try:
+            stream = open(static_file, 'rb')
+        except IOError, e:
+            if e[0] in (errno.EISDIR, errno.EACCES):
+                raise HTTP(403)
+            else:
+                raise HTTP(404)
+        stream.seek(part[0])
+        headers['Content-Range'] = 'bytes %i-%i/%i' % part
+        headers['Content-Length'] = '%i' % bytes
+        status = 206
+    else:
+        try:
+            stream = open(static_file, 'rb')
+        except IOError, e:
+            if e[0] in (errno.EISDIR, errno.EACCES):
+                raise HTTP(403)
+            else:
+                raise HTTP(404)
+        headers['Content-Length'] = fsize
+        bytes = None
+        status = 200
+    if request and request.env.web2py_use_wsgi_file_wrapper:
+        wrapped = request.env.wsgi_file_wrapper(stream, chunk_size)
+    else:
+        wrapped = streamer(stream, chunk_size=chunk_size, bytes=bytes)
+    raise HTTP(status, wrapped, **headers)
+

ADDED   gluon/template.py
Index: gluon/template.py
==================================================================
--- /dev/null
+++ gluon/template.py
@@ -0,0 +1,931 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework (Copyrighted, 2007-2011).
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+Author: Thadeus Burgess
+
+Contributors:
+
+- Thank you to Massimo Di Pierro for creating the original gluon/template.py
+- Thank you to Jonathan Lundell for extensively testing the regex on Jython.
+- Thank you to Limodou (creater of uliweb) who inspired the block-element support for web2py.
+"""
+
+import os
+import re
+import cgi
+import cStringIO
+import logging
+try:
+    from restricted import RestrictedError
+except:
+    def RestrictedError(a,b,c):
+        logging.error(str(a)+':'+str(b)+':'+str(c))
+        return RuntimeError
+
+class Node(object):
+    """
+    Basic Container Object
+    """
+    def __init__(self, value = None, pre_extend = False):
+        self.value = value
+        self.pre_extend = pre_extend
+
+    def __str__(self):
+        return str(self.value)
+
+class SuperNode(Node):
+    def __init__(self, name = '', pre_extend = False):
+        self.name = name
+        self.value = None
+        self.pre_extend = pre_extend
+
+    def __str__(self):
+        if self.value:
+            return str(self.value)
+        else:
+            raise SyntaxError("Undefined parent block ``%s``. \n" % self.name + \
+"You must define a block before referencing it.\nMake sure you have not left out an ``{{end}}`` tag." )
+
+    def __repr__(self):
+        return "%s->%s" % (self.name, self.value)
+
+class BlockNode(Node):
+    """
+    Block Container.
+
+    This Node can contain other Nodes and will render in a hierarchical order
+    of when nodes were added.
+
+    ie::
+
+        {{ block test }}
+            This is default block test
+        {{ end }}
+    """
+    def __init__(self, name = '', pre_extend = False, delimiters = ('{{','}}')):
+        """
+        name - Name of this Node.
+        """
+        self.nodes = []
+        self.name = name
+        self.pre_extend = pre_extend
+        self.left, self.right = delimiters
+
+    def __repr__(self):
+        lines = ['%sblock %s%s' % (self.left,self.name,self.right)]
+        for node in self.nodes:
+            lines.append(str(node))
+        lines.append('%send%s' % (self.left, self.right))
+        return ''.join(lines)
+
+    def __str__(self):
+        """
+        Get this BlockNodes content, not including child Nodes
+        """
+        lines = []
+        for node in self.nodes:
+            if not isinstance(node, BlockNode):
+                lines.append(str(node))
+        return ''.join(lines)
+
+    def append(self, node):
+        """
+        Add an element to the nodes.
+
+        Keyword Arguments
+
+        - node -- Node object or string to append.
+        """
+        if isinstance(node, str) or isinstance(node, Node):
+            self.nodes.append(node)
+        else:
+            raise TypeError("Invalid type; must be instance of ``str`` or ``BlockNode``. %s" % node)
+
+    def extend(self, other):
+        """
+        Extend the list of nodes with another BlockNode class.
+
+        Keyword Arguments
+
+        - other -- BlockNode or Content object to extend from.
+        """
+        if isinstance(other, BlockNode):
+            self.nodes.extend(other.nodes)
+        else:
+            raise TypeError("Invalid type; must be instance of ``BlockNode``. %s" % other)
+
+    def output(self, blocks):
+        """
+        Merges all nodes into a single string.
+
+        blocks -- Dictionary of blocks that are extending
+        from this template.
+        """
+        lines = []
+        # Get each of our nodes
+        for node in self.nodes:
+            # If we have a block level node.
+            if isinstance(node, BlockNode):
+                # If we can override this block.
+                if node.name in blocks:
+                    # Override block from vars.
+                    lines.append(blocks[node.name].output(blocks))
+                # Else we take the default
+                else:
+                    lines.append(node.output(blocks))
+            # Else its just a string
+            else:
+                lines.append(str(node))
+        # Now combine all of our lines together.
+        return ''.join(lines)
+
+class Content(BlockNode):
+    """
+    Parent Container -- Used as the root level BlockNode.
+
+    Contains functions that operate as such.
+    """
+    def __init__(self, name = "ContentBlock", pre_extend = False):
+        """
+        Keyword Arguments
+
+        name -- Unique name for this BlockNode
+        """
+        self.name = name
+        self.nodes = []
+        self.blocks = {}
+        self.pre_extend = pre_extend
+
+    def __str__(self):
+        lines = []
+        # For each of our nodes
+        for node in self.nodes:
+            # If it is a block node.
+            if isinstance(node, BlockNode):
+                # And the node has a name that corresponds with a block in us
+                if node.name in self.blocks:
+                    # Use the overriding output.
+                    lines.append(self.blocks[node.name].output(self.blocks))
+                else:
+                    # Otherwise we just use the nodes output.
+                    lines.append(node.output(self.blocks))
+            else:
+                # It is just a string, so include it.
+                lines.append(str(node))
+        # Merge our list together.
+        return ''.join(lines)
+
+    def _insert(self, other, index = 0):
+        """
+        Inserts object at index.
+        """
+        if isinstance(other, str) or isinstance(other, Node):
+            self.nodes.insert(index, other)
+        else:
+            raise TypeError("Invalid type, must be instance of ``str`` or ``Node``.")
+
+    def insert(self, other, index = 0):
+        """
+        Inserts object at index.
+
+        You may pass a list of objects and have them inserted.
+        """
+        if isinstance(other, (list, tuple)):
+            # Must reverse so the order stays the same.
+            other.reverse()
+            for item in other:
+                self._insert(item, index)
+        else:
+            self._insert(other, index)
+
+    def append(self, node):
+        """
+        Adds a node to list. If it is a BlockNode then we assign a block for it.
+        """
+        if isinstance(node, str) or isinstance(node, Node):
+            self.nodes.append(node)
+            if isinstance(node, BlockNode):
+                self.blocks[node.name] = node
+        else:
+            raise TypeError("Invalid type, must be instance of ``str`` or ``BlockNode``. %s" % node)
+
+    def extend(self, other):
+        """
+        Extends the objects list of nodes with another objects nodes
+        """
+        if isinstance(other, BlockNode):
+            self.nodes.extend(other.nodes)
+            self.blocks.update(other.blocks)
+        else:
+            raise TypeError("Invalid type; must be instance of ``BlockNode``. %s" % other)
+
+    def clear_content(self):
+        self.nodes = []
+
+class TemplateParser(object):
+
+    r_tag = re.compile(r'(\{\{.*?\}\})', re.DOTALL)
+
+    r_multiline = re.compile(r'(""".*?""")|(\'\'\'.*?\'\'\')', re.DOTALL)
+
+    # These are used for re-indentation.
+    # Indent + 1
+    re_block = re.compile('^(elif |else:|except:|except |finally:).*$',
+                      re.DOTALL)
+    # Indent - 1
+    re_unblock = re.compile('^(return|continue|break|raise)( .*)?$', re.DOTALL)
+    # Indent - 1
+    re_pass = re.compile('^pass( .*)?$', re.DOTALL)
+
+    def __init__(self, text,
+                 name    = "ParserContainer",
+                 context = dict(),
+                 path    = 'views/',
+                 writer  = 'response.write',
+                 lexers  = {},
+                 delimiters = ('{{','}}'),
+                 _super_nodes = [],
+                 ):
+        """
+        text -- text to parse
+        context -- context to parse in
+        path -- folder path to templates
+        writer -- string of writer class to use
+        lexers -- dict of custom lexers to use.
+        delimiters -- for example ('{{','}}')
+        _super_nodes -- a list of nodes to check for inclusion
+                        this should only be set by "self.extend"
+                        It contains a list of SuperNodes from a child
+                        template that need to be handled.
+        """
+
+        # Keep a root level name.
+        self.name = name
+        # Raw text to start parsing.
+        self.text = text
+        # Writer to use (refer to the default for an example).
+        # This will end up as
+        # "%s(%s, escape=False)" % (self.writer, value)
+        self.writer = writer
+
+        # Dictionary of custom name lexers to use.
+        if isinstance(lexers, dict):
+            self.lexers = lexers
+        else:
+            self.lexers = {}
+
+        # Path of templates
+        self.path = path
+        # Context for templates.
+        self.context = context
+
+        # allow optional alternative delimiters
+        self.delimiters = delimiters
+        if delimiters!=('{{','}}'):
+            escaped_delimiters = (re.escape(delimiters[0]),re.escape(delimiters[1]))
+            self.r_tag = re.compile(r'(%s.*?%s)' % escaped_delimiters, re.DOTALL)
+
+
+        # Create a root level Content that everything will go into.
+        self.content = Content(name=name)
+
+        # Stack will hold our current stack of nodes.
+        # As we descend into a node, it will be added to the stack
+        # And when we leave, it will be removed from the stack.
+        # self.content should stay on the stack at all times.
+        self.stack = [self.content]
+
+        # This variable will hold a reference to every super block
+        # that we come across in this template.
+        self.super_nodes = []
+
+        # This variable will hold a reference to the child
+        # super nodes that need handling.
+        self.child_super_nodes = _super_nodes
+
+        # This variable will hold a reference to every block
+        # that we come across in this template
+        self.blocks = {}
+
+        # Begin parsing.
+        self.parse(text)
+
+    def to_string(self):
+        """
+        Return the parsed template with correct indentation.
+
+        Used to make it easier to port to python3.
+        """
+        return self.reindent(str(self.content))
+
+    def __str__(self):
+        "Make sure str works exactly the same as python 3"
+        return self.to_string()
+
+    def __unicode__(self):
+        "Make sure str works exactly the same as python 3"
+        return self.to_string()
+
+    def reindent(self, text):
+        """
+        Reindents a string of unindented python code.
+        """
+
+        # Get each of our lines into an array.
+        lines = text.split('\n')
+
+        # Our new lines
+        new_lines = []
+
+        # Keeps track of how many indents we have.
+        # Used for when we need to drop a level of indentation
+        # only to reindent on the next line.
+        credit = 0
+
+        # Current indentation
+        k = 0
+
+        #################
+        # THINGS TO KNOW
+        #################
+
+        # k += 1 means indent
+        # k -= 1 means unindent
+        # credit = 1 means unindent on the next line.
+
+        for raw_line in lines:
+            line = raw_line.strip()
+
+            # ignore empty lines
+            if not line:
+                continue
+
+            # If we have a line that contains python code that
+            # should be unindented for this line of code.
+            # and then reindented for the next line.
+            if TemplateParser.re_block.match(line):
+                k = k + credit - 1
+
+            # We obviously can't have a negative indentation
+            k = max(k,0)
+
+            # Add the indentation!
+            new_lines.append(' '*(4*k)+line)
+
+            # Bank account back to 0 again :(
+            credit = 0
+
+            # If we are a pass block, we obviously de-dent.
+            if TemplateParser.re_pass.match(line):
+                k -= 1
+
+            # If we are any of the following, de-dent.
+            # However, we should stay on the same level
+            # But the line right after us will be de-dented.
+            # So we add one credit to keep us at the level
+            # while moving back one indentation level.
+            if TemplateParser.re_unblock.match(line):
+                credit = 1
+                k -= 1
+
+            # If we are an if statement, a try, or a semi-colon we
+            # probably need to indent the next line.
+            if line.endswith(':') and not line.startswith('#'):
+                k += 1
+
+        # This must come before so that we can raise an error with the
+        # right content.
+        new_text = '\n'.join(new_lines)
+
+        if k > 0:
+            self._raise_error('missing "pass" in view', new_text)
+        elif k < 0:
+            self._raise_error('too many "pass" in view', new_text)
+
+        return new_text
+
+    def _raise_error(self, message='', text=None):
+        """
+        Raise an error using itself as the filename and textual content.
+        """
+        raise RestrictedError(self.name, text or self.text, message)
+
+    def _get_file_text(self, filename):
+        """
+        Attempt to open ``filename`` and retrieve its text.
+
+        This will use self.path to search for the file.
+        """
+
+        # If they didn't specify a filename, how can we find one!
+        if not filename.strip():
+            self._raise_error('Invalid template filename')
+
+        # Get the filename; filename looks like ``"template.html"``.
+        # We need to eval to remove the quotes and get the string type.
+        filename = eval(filename, self.context)
+
+        # Get the path of the file on the system.
+        filepath = os.path.join(self.path, filename)
+
+        # try to read the text.
+        try:
+            fileobj = open(filepath, 'rb')
+            text = fileobj.read()
+            fileobj.close()
+        except IOError:
+            self._raise_error('Unable to open included view file: ' + filepath)
+
+        return text
+
+    def include(self, content, filename):
+        """
+        Include ``filename`` here.
+        """
+        text = self._get_file_text(filename)
+
+        t = TemplateParser(text,
+                           name    = filename,
+                           context = self.context,
+                           path    = self.path,
+                           writer  = self.writer,
+                           delimiters = self.delimiters)
+
+        content.append(t.content)
+
+    def extend(self, filename):
+        """
+        Extend ``filename``. Anything not declared in a block defined by the
+        parent will be placed in the parent templates ``{{include}}`` block.
+        """
+        text = self._get_file_text(filename)
+
+        # Create out nodes list to send to the parent
+        super_nodes = []
+        # We want to include any non-handled nodes.
+        super_nodes.extend(self.child_super_nodes)
+        # And our nodes as well.
+        super_nodes.extend(self.super_nodes)
+
+        t = TemplateParser(text,
+                    name         = filename,
+                    context      = self.context,
+                    path         = self.path,
+                    writer       = self.writer,
+                    delimiters   = self.delimiters,
+                    _super_nodes = super_nodes)
+
+        # Make a temporary buffer that is unique for parent
+        # template.
+        buf = BlockNode(name='__include__' + filename, delimiters=self.delimiters)
+        pre = []
+
+        # Iterate through each of our nodes
+        for node in self.content.nodes:
+            # If a node is a block
+            if isinstance(node, BlockNode):
+                # That happens to be in the parent template
+                if node.name in t.content.blocks:
+                    # Do not include it
+                    continue
+
+            if isinstance(node, Node):
+                # Or if the node was before the extension
+                # we should not include it
+                if node.pre_extend:
+                    pre.append(node)
+                    continue
+
+            # Otherwise, it should go int the
+            # Parent templates {{include}} section.
+                buf.append(node)
+            else:
+                buf.append(node)
+
+        # Clear our current nodes. We will be replacing this with
+        # the parent nodes.
+        self.content.nodes = []
+
+        # Set our include, unique by filename
+        t.content.blocks['__include__' + filename] = buf
+
+        # Make sure our pre_extended nodes go first
+        t.content.insert(pre)
+
+        # Then we extend our blocks
+        t.content.extend(self.content)
+
+        # Work off the parent node.
+        self.content = t.content
+
+    def parse(self, text):
+
+        # Basically, r_tag.split will split the text into
+        # an array containing, 'non-tag', 'tag', 'non-tag', 'tag'
+        # so if we alternate this variable, we know
+        # what to look for. This is alternate to
+        # line.startswith("{{")
+        in_tag = False
+        extend = None
+        pre_extend = True
+
+        # Use a list to store everything in
+        # This is because later the code will "look ahead"
+        # for missing strings or brackets.
+        ij = self.r_tag.split(text)
+        # j = current index
+        # i = current item
+        for j in range(len(ij)):
+            i = ij[j]
+
+            if i:
+                if len(self.stack) == 0:
+                    self._raise_error('The "end" tag is unmatched, please check if you have a starting "block" tag')
+
+                # Our current element in the stack.
+                top = self.stack[-1]
+
+                if in_tag:
+                    line = i
+
+                    # If we are missing any strings!!!!
+                    # This usually happens with the following example
+                    # template code
+                    #
+                    # {{a = '}}'}}
+                    # or
+                    # {{a = '}}blahblah{{'}}
+                    #
+                    # This will fix these
+                    # This is commented out because the current template
+                    # system has this same limitation. Since this has a
+                    # performance hit on larger templates, I do not recommend
+                    # using this code on production systems. This is still here
+                    # for "i told you it *can* be fixed" purposes.
+                    #
+                    #
+#                    if line.count("'") % 2 != 0 or line.count('"') % 2 != 0:
+#
+#                        # Look ahead
+#                        la = 1
+#                        nextline = ij[j+la]
+#
+#                        # As long as we have not found our ending
+#                        # brackets keep going
+#                        while '}}' not in nextline:
+#                            la += 1
+#                            nextline += ij[j+la]
+#                            # clear this line, so we
+#                            # don't attempt to parse it
+#                            # this is why there is an "if i"
+#                            # around line 530
+#                            ij[j+la] = ''
+#
+#                        # retrieve our index.
+#                        index = nextline.index('}}')
+#
+#                        # Everything before the new brackets
+#                        before = nextline[:index+2]
+#
+#                        # Everything after
+#                        after = nextline[index+2:]
+#
+#                        # Make the next line everything after
+#                        # so it parses correctly, this *should* be
+#                        # all html
+#                        ij[j+1] = after
+#
+#                        # Add everything before to the current line
+#                        line += before
+
+                    # Get rid of '{{' and '}}'
+                    line = line[2:-2].strip()
+
+                    # This is bad juju, but let's do it anyway
+                    if not line:
+                        continue
+
+                    # We do not want to replace the newlines in code,
+                    # only in block comments.
+                    def remove_newline(re_val):
+                        # Take the entire match and replace newlines with
+                        # escaped newlines.
+                        return re_val.group(0).replace('\n', '\\n')
+
+                    # Perform block comment escaping.
+                    # This performs escaping ON anything
+                    # in between """ and """
+                    line = re.sub(TemplateParser.r_multiline,
+                                remove_newline,
+                                line)
+
+                    if line.startswith('='):
+                        # IE: {{=response.title}}
+                        name, value = '=', line[1:].strip()
+                    else:
+                        v = line.split(' ', 1)
+                        if len(v) == 1:
+                            # Example
+                            # {{ include }}
+                            # {{ end }}
+                            name = v[0]
+                            value = ''
+                        else:
+                            # Example
+                            # {{ block pie }}
+                            # {{ include "layout.html" }}
+                            # {{ for i in range(10): }}
+                            name = v[0]
+                            value = v[1]
+
+                    # This will replace newlines in block comments
+                    # with the newline character. This is so that they
+                    # retain their formatting, but squish down to one
+                    # line in the rendered template.
+
+                    # First check if we have any custom lexers
+                    if name in self.lexers:
+                        # Pass the information to the lexer
+                        # and allow it to inject in the environment
+
+                        # You can define custom names such as
+                        # '{{<<variable}}' which could potentially
+                        # write unescaped version of the variable.
+                        self.lexers[name](parser    = self,
+                                          value     = value,
+                                          top       = top,
+                                          stack     = self.stack,)
+
+                    elif name == '=':
+                        # So we have a variable to insert into
+                        # the template
+                        buf = "\n%s(%s)" % (self.writer, value)
+                        top.append(Node(buf, pre_extend = pre_extend))
+
+                    elif name == 'block' and not value.startswith('='):
+                        # Make a new node with name.
+                        node = BlockNode(name = value.strip(),
+                                         pre_extend = pre_extend,
+                                         delimiters = self.delimiters)
+
+                        # Append this node to our active node
+                        top.append(node)
+
+                        # Make sure to add the node to the stack.
+                        # so anything after this gets added
+                        # to this node. This allows us to
+                        # "nest" nodes.
+                        self.stack.append(node)
+
+                    elif name == 'end' and not value.startswith('='):
+                        # We are done with this node.
+
+                        # Save an instance of it
+                        self.blocks[top.name] = top
+
+                        # Pop it.
+                        self.stack.pop()
+
+                    elif name == 'super' and not value.startswith('='):
+                        # Get our correct target name
+                        # If they just called {{super}} without a name
+                        # attempt to assume the top blocks name.
+                        if value:
+                            target_node = value
+                        else:
+                            target_node = top.name
+
+                        # Create a SuperNode instance
+                        node = SuperNode(name = target_node,
+                                            pre_extend = pre_extend)
+
+                        # Add this to our list to be taken care of
+                        self.super_nodes.append(node)
+
+                        # And put in in the tree
+                        top.append(node)
+
+                    elif name == 'include' and not value.startswith('='):
+                        # If we know the target file to include
+                        if value:
+                            self.include(top, value)
+
+                        # Otherwise, make a temporary include node
+                        # That the child node will know to hook into.
+                        else:
+                            include_node = BlockNode(name = '__include__' + self.name,
+                                                     pre_extend = pre_extend,
+                                                     delimiters = self.delimiters)
+                            top.append(include_node)
+
+                    elif name == 'extend' and not value.startswith('='):
+                        # We need to extend the following
+                        # template.
+                        extend = value
+                        pre_extend = False
+
+                    else:
+                        # If we don't know where it belongs
+                        # we just add it anyways without formatting.
+                        if line and in_tag:
+
+                            # Split on the newlines >.<
+                            tokens = line.split('\n')
+
+                            # We need to look for any instances of
+                            # for i in range(10):
+                            #   = i
+                            # pass
+                            # So we can properly put a response.write() in place.
+                            continuation = False
+                            len_parsed = 0
+                            for k in range(len(tokens)):
+
+                                tokens[k] = tokens[k].strip()
+                                len_parsed += len(tokens[k])
+
+                                if tokens[k].startswith('='):
+                                    if tokens[k].endswith('\\'):
+                                        continuation = True
+                                        tokens[k] = "\n%s(%s" % (self.writer, tokens[k][1:].strip())
+                                    else:
+                                        tokens[k] = "\n%s(%s)" % (self.writer, tokens[k][1:].strip())
+                                elif continuation:
+                                    tokens[k] += ')'
+                                    continuation = False
+
+
+                            buf = "\n%s" % '\n'.join(tokens)
+                            top.append(Node(buf, pre_extend = pre_extend))
+
+                else:
+                    # It is HTML so just include it.
+                    buf = "\n%s(%r, escape=False)" % (self.writer, i)
+                    top.append(Node(buf, pre_extend = pre_extend))
+
+            # Remember: tag, not tag, tag, not tag
+            in_tag = not in_tag
+
+        # Make a list of items to remove from child
+        to_rm = []
+
+        # Go through each of the children nodes
+        for node in self.child_super_nodes:
+            # If we declared a block that this node wants to include
+            if node.name in self.blocks:
+                # Go ahead and include it!
+                node.value = self.blocks[node.name]
+                # Since we processed this child, we don't need to
+                # pass it along to the parent
+                to_rm.append(node)
+
+        # Remove some of the processed nodes
+        for node in to_rm:
+            # Since this is a pointer, it works beautifully.
+            # Sometimes I miss C-Style pointers... I want my asterisk...
+            self.child_super_nodes.remove(node)
+
+        # If we need to extend a template.
+        if extend:
+            self.extend(extend)
+
+# We need this for integration with gluon
+def parse_template(filename,
+                   path    = 'views/',
+                   context = dict(),
+                   lexers  = {},
+                   delimiters = ('{{','}}')
+                   ):
+    """
+    filename can be a view filename in the views folder or an input stream
+    path is the path of a views folder
+    context is a dictionary of symbols used to render the template
+    """
+
+    # First, if we have a str try to open the file
+    if isinstance(filename, str):
+        try:
+            fp = open(os.path.join(path, filename), 'rb')
+            text = fp.read()
+            fp.close()
+        except IOError:
+            raise RestrictedError(filename, '', 'Unable to find the file')
+    else:
+        text = filename.read()
+
+    # Use the file contents to get a parsed template and return it.
+    return str(TemplateParser(text, context=context, path=path, lexers=lexers, delimiters=delimiters))
+
+def get_parsed(text):
+    """
+    Returns the indented python code of text. Useful for unit testing.
+
+    """
+    return str(TemplateParser(text))
+
+# And this is a generic render function.
+# Here for integration with gluon.
+def render(content = "hello world",
+           stream = None,
+           filename = None,
+           path = None,
+           context = {},
+           lexers  = {},
+           delimiters = ('{{','}}')
+           ):
+    """
+    >>> render()
+    'hello world'
+    >>> render(content='abc')
+    'abc'
+    >>> render(content='abc\\'')
+    "abc'"
+    >>> render(content='a"\\'bc')
+    'a"\\'bc'
+    >>> render(content='a\\nbc')
+    'a\\nbc'
+    >>> render(content='a"bcd"e')
+    'a"bcd"e'
+    >>> render(content="'''a\\nc'''")
+    "'''a\\nc'''"
+    >>> render(content="'''a\\'c'''")
+    "'''a\'c'''"
+    >>> render(content='{{for i in range(a):}}{{=i}}<br />{{pass}}', context=dict(a=5))
+    '0<br />1<br />2<br />3<br />4<br />'
+    >>> render(content='{%for i in range(a):%}{%=i%}<br />{%pass%}', context=dict(a=5),delimiters=('{%','%}'))
+    '0<br />1<br />2<br />3<br />4<br />'
+    >>> render(content="{{='''hello\\nworld'''}}")
+    'hello\\nworld'
+    >>> render(content='{{for i in range(3):\\n=i\\npass}}')
+    '012'
+    """
+    # Here to avoid circular Imports
+    try:
+        from globals import Response
+    except:
+        # Working standalone. Build a mock Response object.
+        class Response():
+            def __init__(self):
+                self.body = cStringIO.StringIO()
+            def write(self, data, escape=True):
+                if not escape:
+                    self.body.write(str(data))
+                elif hasattr(data,'xml') and callable(data.xml):
+                    self.body.write(data.xml())
+                else:
+                    # make it a string
+                    if not isinstance(data, (str, unicode)):
+                        data = str(data)
+                    elif isinstance(data, unicode):
+                        data = data.encode('utf8', 'xmlcharrefreplace')
+                    data = cgi.escape(data, True).replace("'","'")
+                    self.body.write(data)
+
+        # A little helper to avoid escaping.
+        class NOESCAPE():
+            def __init__(self, text):
+                self.text = text
+            def xml(self):
+                return self.text
+        # Add it to the context so we can use it.
+        context['NOESCAPE'] = NOESCAPE
+
+    # If we don't have anything to render, why bother?
+    if not content and not stream and not filename:
+        raise SyntaxError, "Must specify a stream or filename or content"
+
+    # Here for legacy purposes, probably can be reduced to something more simple.
+    close_stream = False
+    if not stream:
+        if filename:
+            stream = open(filename, 'rb')
+            close_stream = True
+        elif content:
+            stream = cStringIO.StringIO(content)
+
+    # Get a response class.
+    context['response'] = Response()
+
+    # Execute the template.
+    code = str(TemplateParser(stream.read(), context=context, path=path, lexers=lexers, delimiters=delimiters))
+    try:
+        exec(code) in context
+    except Exception:
+        # for i,line in enumerate(code.split('\n')): print i,line
+        raise
+
+    if close_stream:
+        stream.close()
+
+    # Returned the rendered content.
+    return context['response'].body.getvalue()
+
+
+if __name__ == '__main__':
+    import doctest
+    doctest.testmod()
+

ADDED   gluon/tests/__init__.py
Index: gluon/tests/__init__.py
==================================================================
--- /dev/null
+++ gluon/tests/__init__.py
@@ -0,0 +1,1 @@
+

ADDED   gluon/tests/test.sh
Index: gluon/tests/test.sh
==================================================================
--- /dev/null
+++ gluon/tests/test.sh
@@ -0,0 +1,45 @@
+#!/bin/sh
+#
+#  run unit tests under nose if available,
+#  optionally with coverage
+#
+#  test.sh [cover [gluon.rewrite]]
+#
+#  easy_install nose
+#  easy_install coverage
+#
+NOSETESTS=nosetests
+COVER=gluon		# change to (eg) gluon.rewrite to collect coverage stats on a single module
+PROCESSES=4
+
+WHICH=`which $NOSETESTS`
+if [ "$WHICH" == "" ]; then
+	# if nose isn't available, run the tests directly
+	for testmod in test_*.py; do
+		python $testmod
+	done
+else
+	if [ "$1" = "cover" ]; then
+		# note: coverage doesn't handle multiple processes
+		if [ "$2" != "" ]; then
+			COVER=$2
+		fi
+		$NOSETESTS --with-coverage --cover-package=$COVER --cover-erase
+	elif [ "$1" = "doctest" ]; then
+		# this has to run in gluon's parent; needs work
+		#
+		# the problem is that doctests run this way have a very different environment,
+		# apparently due to imports that don't happen in the normal course of running
+		# doctest via __main__.
+		#
+		echo doctest not supported >&2
+		exit 1
+		if [ ! -d gluon ]; then
+			cd ../..
+		fi
+		$NOSETESTS --with-doctest
+	else
+		$NOSETESTS --processes=$PROCESSES
+	fi
+fi
+

ADDED   gluon/tests/test_dal.py
Index: gluon/tests/test_dal.py
==================================================================
--- /dev/null
+++ gluon/tests/test_dal.py
@@ -0,0 +1,486 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+"""
+    Unit tests for gluon.sql
+"""
+
+import sys
+import os
+if os.path.isdir('gluon'):
+    sys.path.append(os.path.realpath('gluon'))
+else:
+    sys.path.append(os.path.realpath('../'))
+
+import unittest
+import datetime
+from dal import DAL, Field, Table, SQLALL
+
+ALLOWED_DATATYPES = [
+    'string',
+    'text',
+    'integer',
+    'boolean',
+    'double',
+    'blob',
+    'date',
+    'time',
+    'datetime',
+    'upload',
+    'password',
+    ]
+
+
+def setUpModule():
+    pass
+
+def tearDownModule():
+    if os.path.isfile('sql.log'):
+        os.unlink('sql.log')
+
+
+class TestFields(unittest.TestCase):
+
+    def testFieldName(self):
+
+        # Check that Fields cannot start with underscores
+        self.assertRaises(SyntaxError, Field, '_abc', 'string')
+
+        # Check that Fields cannot contain punctuation other than underscores
+        self.assertRaises(SyntaxError, Field, 'a.bc', 'string')
+
+        # Check that Fields cannot be a name of a method or property of Table
+        for x in ['drop', 'on', 'truncate']:
+            self.assertRaises(SyntaxError, Field, x, 'string')
+
+        # Check that Fields allows underscores in the body of a field name.
+        self.assert_(Field('a_bc', 'string'),
+            "Field isn't allowing underscores in fieldnames.  It should.")
+
+    def testFieldTypes(self):
+
+        # Check that string, text, and password default length is 512
+        for typ in ['string', 'password']:
+            self.assert_(Field('abc', typ).length == 512,
+                         "Default length for type '%s' is not 512 or 255" % typ)
+
+        # Check that upload default length is 512
+        self.assert_(Field('abc', 'upload').length == 512,
+                     "Default length for type 'upload' is not 128")
+
+        # Check that Tables passed in the type creates a reference
+        self.assert_(Field('abc', Table(None, 'temp')).type
+                      == 'reference temp',
+                     'Passing an Table does not result in a reference type.')
+
+    def testFieldLabels(self):
+
+        # Check that a label is successfully built from the supplied fieldname
+        self.assert_(Field('abc', 'string').label == 'Abc',
+                     'Label built is incorrect')
+        self.assert_(Field('abc_def', 'string').label == 'Abc Def',
+                     'Label built is incorrect')
+
+    def testFieldFormatters(self):  # Formatter should be called Validator
+
+        # Test the default formatters
+        for typ in ALLOWED_DATATYPES:
+            f = Field('abc', typ)
+            if typ not in ['date', 'time', 'datetime']:
+                isinstance(f.formatter('test'), str)
+            else:
+                isinstance(f.formatter(datetime.datetime.now()), str)
+
+    def testRun(self):
+        db = DAL('sqlite:memory:')
+        for ft in ['string', 'text', 'password', 'upload', 'blob']:
+            db.define_table('t', Field('a', ft, default=''))
+            self.assertEqual(db.t.insert(a='x'), 1)
+            self.assertEqual(db().select(db.t.a)[0].a, 'x')
+            db.t.drop()
+        db.define_table('t', Field('a', 'integer', default=1))
+        self.assertEqual(db.t.insert(a=3), 1)
+        self.assertEqual(db().select(db.t.a)[0].a, 3)
+        db.t.drop()
+        db.define_table('t', Field('a', 'double', default=1))
+        self.assertEqual(db.t.insert(a=3.1), 1)
+        self.assertEqual(db().select(db.t.a)[0].a, 3.1)
+        db.t.drop()
+        db.define_table('t', Field('a', 'boolean', default=True))
+        self.assertEqual(db.t.insert(a=True), 1)
+        self.assertEqual(db().select(db.t.a)[0].a, True)
+        db.t.drop()
+        db.define_table('t', Field('a', 'date',
+                        default=datetime.date.today()))
+        t0 = datetime.date.today()
+        self.assertEqual(db.t.insert(a=t0), 1)
+        self.assertEqual(db().select(db.t.a)[0].a, t0)
+        db.t.drop()
+        db.define_table('t', Field('a', 'datetime',
+                        default=datetime.datetime.today()))
+        t0 = datetime.datetime(
+            1971,
+            12,
+            21,
+            10,
+            30,
+            55,
+            0,
+            )
+        self.assertEqual(db.t.insert(a=t0), 1)
+        self.assertEqual(db().select(db.t.a)[0].a, t0)
+        db.t.drop()
+        db.define_table('t', Field('a', 'time', default='11:30'))
+        t0 = datetime.time(10, 30, 55)
+        self.assertEqual(db.t.insert(a=t0), 1)
+        self.assertEqual(db().select(db.t.a)[0].a, t0)
+        db.t.drop()
+
+
+class TestAll(unittest.TestCase):
+
+    def setUp(self):
+        self.pt = Table(None,'PseudoTable',Field('name'),Field('birthdate'))
+
+    def testSQLALL(self):
+        ans = 'PseudoTable.id, PseudoTable.name, PseudoTable.birthdate'
+        self.assertEqual(str(SQLALL(self.pt)), ans)
+
+
+class TestTable(unittest.TestCase):
+
+    def testTableCreation(self):
+
+        # Check for error when not passing type other than Field or Table
+
+        self.assertRaises(SyntaxError, Table, None, 'test', None)
+
+        persons = Table(None, 'persons',
+                        Field('firstname','string'), 
+                        Field('lastname', 'string'))
+        
+        # Does it have the correct fields?
+
+        self.assert_(set(persons.fields).issuperset(set(['firstname',
+                                                         'lastname'])))
+
+        # ALL is set correctly
+
+        self.assert_('persons.firstname, persons.lastname'
+                      in str(persons.ALL))
+
+    def testTableAlias(self):
+        db = DAL('sqlite:memory:')
+        persons = Table(db, 'persons', Field('firstname',
+                           'string'), Field('lastname', 'string'))
+        aliens = persons.with_alias('aliens')
+
+        # Are the different table instances with the same fields
+
+        self.assert_(persons is not aliens)
+        self.assert_(set(persons.fields) == set(aliens.fields))
+
+    def testTableInheritance(self):
+        persons = Table(None, 'persons', Field('firstname',
+                           'string'), Field('lastname', 'string'))
+        customers = Table(None, 'customers',
+                             Field('items_purchased', 'integer'),
+                             persons)
+        self.assert_(set(customers.fields).issuperset(set(
+            ['items_purchased', 'firstname', 'lastname'])))
+
+
+class TestInsert(unittest.TestCase):
+
+    def testRun(self):
+        db = DAL('sqlite:memory:')
+        db.define_table('t', Field('a'))
+        self.assertEqual(db.t.insert(a='1'), 1)
+        self.assertEqual(db.t.insert(a='1'), 2)
+        self.assertEqual(db.t.insert(a='1'), 3)
+        self.assertEqual(db(db.t.a == '1').count(), 3)
+        self.assertEqual(db(db.t.a == '1').update(a='2'), 3)
+        self.assertEqual(db(db.t.a == '2').count(), 3)
+        self.assertEqual(db(db.t.a == '2').delete(), 3)
+        db.t.drop()
+
+
+class TestSelect(unittest.TestCase):
+
+    def testRun(self):
+        db = DAL('sqlite:memory:')
+        db.define_table('t', Field('a'))
+        self.assertEqual(db.t.insert(a='1'), 1)
+        self.assertEqual(db.t.insert(a='2'), 2)
+        self.assertEqual(db.t.insert(a='3'), 3)
+        self.assertEqual(len(db(db.t.id > 0).select()), 3)
+        self.assertEqual(db(db.t.id > 0).select(orderby=~db.t.a
+                          | db.t.id)[0].a, '3')
+        self.assertEqual(len(db(db.t.id > 0).select(limitby=(1, 2))), 1)
+        self.assertEqual(db(db.t.id > 0).select(limitby=(1, 2))[0].a,
+                         '2')
+        self.assertEqual(len(db().select(db.t.ALL)), 3)
+        self.assertEqual(len(db(db.t.a == None).select()), 0)
+        self.assertEqual(len(db(db.t.a != None).select()), 3)
+        self.assertEqual(len(db(db.t.a > '1').select()), 2)
+        self.assertEqual(len(db(db.t.a >= '1').select()), 3)
+        self.assertEqual(len(db(db.t.a == '1').select()), 1)
+        self.assertEqual(len(db(db.t.a != '1').select()), 2)
+        self.assertEqual(len(db(db.t.a < '3').select()), 2)
+        self.assertEqual(len(db(db.t.a <= '3').select()), 3)
+        self.assertEqual(len(db(db.t.a > '1')(db.t.a < '3').select()), 1)
+        self.assertEqual(len(db((db.t.a > '1') & (db.t.a < '3')).select()), 1)
+        self.assertEqual(len(db((db.t.a > '1') | (db.t.a < '3')).select()), 3)
+        self.assertEqual(len(db((db.t.a > '1') & ~(db.t.a > '2')).select()), 1)
+        self.assertEqual(len(db(~(db.t.a > '1') & (db.t.a > '2')).select()), 0)
+        db.t.drop()
+
+
+class TestBelongs(unittest.TestCase):
+
+    def testRun(self):
+        db = DAL('sqlite:memory:')
+        db.define_table('t', Field('a'))
+        self.assertEqual(db.t.insert(a='1'), 1)
+        self.assertEqual(db.t.insert(a='2'), 2)
+        self.assertEqual(db.t.insert(a='3'), 3)
+        self.assertEqual(len(db(db.t.a.belongs(('1', '3'))).select()),
+                         2)
+        self.assertEqual(len(db(db.t.a.belongs(db(db.t.id
+                          > 2)._select(db.t.a))).select()), 1)
+        self.assertEqual(len(db(db.t.a.belongs(db(db.t.a.belongs(('1',
+                         '3')))._select(db.t.a))).select()), 2)
+        self.assertEqual(len(db(db.t.a.belongs(db(db.t.a.belongs(db
+                         (db.t.a.belongs(('1', '3')))._select(db.t.a)))._select(
+                         db.t.a))).select()),
+                         2)
+        db.t.drop()
+
+
+class TestLike(unittest.TestCase):
+
+    def testRun(self):
+        db = DAL('sqlite:memory:')
+        db.define_table('t', Field('a'))
+        self.assertEqual(db.t.insert(a='abc'), 1)
+        self.assertEqual(len(db(db.t.a.like('a%')).select()), 1)
+        self.assertEqual(len(db(db.t.a.like('%b%')).select()), 1)
+        self.assertEqual(len(db(db.t.a.like('%c')).select()), 1)
+        self.assertEqual(len(db(db.t.a.like('%d%')).select()), 0)
+        self.assertEqual(len(db(db.t.a.lower().like('A%')).select()), 1)
+        self.assertEqual(len(db(db.t.a.lower().like('%B%')).select()),
+                         1)
+        self.assertEqual(len(db(db.t.a.lower().like('%C')).select()), 1)
+        self.assertEqual(len(db(db.t.a.upper().like('A%')).select()), 1)
+        self.assertEqual(len(db(db.t.a.upper().like('%B%')).select()),
+                         1)
+        self.assertEqual(len(db(db.t.a.upper().like('%C')).select()), 1)
+        db.t.drop()
+
+
+class TestDatetime(unittest.TestCase):
+
+    def testRun(self):
+        db = DAL('sqlite:memory:')
+        db.define_table('t', Field('a', 'datetime'))
+        self.assertEqual(db.t.insert(a=datetime.datetime(1971, 12, 21,
+                         11, 30)), 1)
+        self.assertEqual(db.t.insert(a=datetime.datetime(1971, 11, 21,
+                         10, 30)), 2)
+        self.assertEqual(db.t.insert(a=datetime.datetime(1970, 12, 21,
+                         9, 30)), 3)
+        self.assertEqual(len(db(db.t.a == datetime.datetime(1971, 12,
+                         21, 11, 30)).select()), 1)
+        self.assertEqual(len(db(db.t.a.year() == 1971).select()), 2)
+        self.assertEqual(len(db(db.t.a.month() == 12).select()), 2)
+        self.assertEqual(len(db(db.t.a.day() == 21).select()), 3)
+        self.assertEqual(len(db(db.t.a.hour() == 11).select()), 1)
+        self.assertEqual(len(db(db.t.a.minutes() == 30).select()), 3)
+        self.assertEqual(len(db(db.t.a.seconds() == 0).select()), 3)
+        db.t.drop()
+
+
+class TestExpressions(unittest.TestCase):
+
+    def testRun(self):
+        db = DAL('sqlite:memory:')
+        db.define_table('t', Field('a', 'integer'))
+        self.assertEqual(db.t.insert(a=1), 1)
+        self.assertEqual(db.t.insert(a=2), 2)
+        self.assertEqual(db.t.insert(a=3), 3)
+        self.assertEqual(db(db.t.a == 3).update(a=db.t.a + 1), 1)
+        self.assertEqual(len(db(db.t.a == 4).select()), 1)
+        db.t.drop()
+
+
+class TestJoin(unittest.TestCase):
+
+    def testRun(self):
+        db = DAL('sqlite:memory:')
+        db.define_table('t1', Field('a'))
+        db.define_table('t2', Field('a'), Field('b', db.t1))
+        i1 = db.t1.insert(a='1')
+        i2 = db.t1.insert(a='2')
+        i3 = db.t1.insert(a='3')
+        db.t2.insert(a='4', b=i1)
+        db.t2.insert(a='5', b=i2)
+        db.t2.insert(a='6', b=i2)
+        self.assertEqual(len(db(db.t1.id
+                          == db.t2.b).select(orderby=db.t1.a
+                          | db.t2.a)), 3)
+        self.assertEqual(db(db.t1.id == db.t2.b).select(orderby=db.t1.a
+                          | db.t2.a)[2].t1.a, '2')
+        self.assertEqual(db(db.t1.id == db.t2.b).select(orderby=db.t1.a
+                          | db.t2.a)[2].t2.a, '6')
+        self.assertEqual(len(db().select(db.t1.ALL, db.t2.ALL,
+                         left=db.t2.on(db.t1.id == db.t2.b),
+                         orderby=db.t1.a | db.t2.a)), 4)
+        self.assertEqual(db().select(db.t1.ALL, db.t2.ALL,
+                         left=db.t2.on(db.t1.id == db.t2.b),
+                         orderby=db.t1.a | db.t2.a)[2].t1.a, '2')
+        self.assertEqual(db().select(db.t1.ALL, db.t2.ALL,
+                         left=db.t2.on(db.t1.id == db.t2.b),
+                         orderby=db.t1.a | db.t2.a)[2].t2.a, '6')
+        self.assertEqual(db().select(db.t1.ALL, db.t2.ALL,
+                         left=db.t2.on(db.t1.id == db.t2.b),
+                         orderby=db.t1.a | db.t2.a)[3].t1.a, '3')
+        self.assertEqual(db().select(db.t1.ALL, db.t2.ALL,
+                         left=db.t2.on(db.t1.id == db.t2.b),
+                         orderby=db.t1.a | db.t2.a)[3].t2.a, None)
+        self.assertEqual(len(db().select(db.t1.ALL, db.t2.id.count(),
+                         left=db.t2.on(db.t1.id == db.t2.b),
+                         orderby=db.t1.a | db.t2.a, groupby=db.t1.a)),
+                         3)
+        self.assertEqual(db().select(db.t1.ALL, db.t2.id.count(),
+                         left=db.t2.on(db.t1.id == db.t2.b),
+                         orderby=db.t1.a | db.t2.a,
+                         groupby=db.t1.a)[0]._extra[db.t2.id.count()],
+                         1)
+        self.assertEqual(db().select(db.t1.ALL, db.t2.id.count(),
+                         left=db.t2.on(db.t1.id == db.t2.b),
+                         orderby=db.t1.a | db.t2.a,
+                         groupby=db.t1.a)[1]._extra[db.t2.id.count()],
+                         2)
+        self.assertEqual(db().select(db.t1.ALL, db.t2.id.count(),
+                         left=db.t2.on(db.t1.id == db.t2.b),
+                         orderby=db.t1.a | db.t2.a,
+                         groupby=db.t1.a)[2]._extra[db.t2.id.count()],
+                         0)
+        db.t1.drop()
+        db.t2.drop()
+
+
+class TestMinMaxSum(unittest.TestCase):
+
+    def testRun(self):
+        db = DAL('sqlite:memory:')
+        db.define_table('t', Field('a', 'integer'))
+        self.assertEqual(db.t.insert(a=1), 1)
+        self.assertEqual(db.t.insert(a=2), 2)
+        self.assertEqual(db.t.insert(a=3), 3)
+        s = db.t.a.min()
+        self.assertEqual(db(db.t.id > 0).select(s)[0]._extra[s], 1)
+        s = db.t.a.max()
+        self.assertEqual(db(db.t.id > 0).select(s)[0]._extra[s], 3)
+        s = db.t.a.sum()
+        self.assertEqual(db(db.t.id > 0).select(s)[0]._extra[s], 6)
+        s = db.t.a.count()
+        self.assertEqual(db(db.t.id > 0).select(s)[0]._extra[s], 3)
+        db.t.drop()
+
+
+#class TestCache(unittest.
+#    def testRun(self):
+#        cache = cache.ram
+#        db = DAL('sqlite:memory:')
+#        db.define_table('t', Field('a'))
+#        db.t.insert(a='1')
+#        r1 = db().select(db.t.ALL, cache=(cache, 1000))
+#        db.t.insert(a='1')
+#        r2 = db().select(db.t.ALL, cache=(cache, 1000))
+#        self.assertEqual(r1.response, r2.response)
+#        db.t.drop()
+
+
+class TestMigrations(unittest.TestCase):
+
+    def testRun(self):
+        db = DAL('sqlite://.storage.db')
+        db.define_table('t', Field('a'), migrate='.storage.table')
+        db.commit()
+        db = DAL('sqlite://.storage.db')
+        db.define_table('t', Field('a'), Field('b'),
+                        migrate='.storage.table')
+        db.commit()
+        db = DAL('sqlite://.storage.db')
+        db.define_table('t', Field('a'), Field('b', 'text'),
+                        migrate='.storage.table')
+        db.commit()
+        db = DAL('sqlite://.storage.db')
+        db.define_table('t', Field('a'), migrate='.storage.table')
+        db.t.drop()
+        db.commit()
+
+    def tearDown(self):
+        os.unlink('.storage.db')
+
+class TestReferece(unittest.TestCase):
+
+    def testRun(self):
+        db = DAL('sqlite:memory:')
+        db.define_table('t', Field('name'), Field('a','reference t'))
+        db.commit()
+        x = db.t.insert(name='max')
+        assert x.id == 1
+        assert x['id'] == 1
+        x.a = x
+        assert x.a == 1
+        x.update_record()
+        y = db.t[1]
+        assert y.a == 1
+        assert y.a.a.a.a.a.a.name == 'max'
+        z=db.t.insert(name='xxx', a = y)
+        assert z.a == y.id
+        db.t.drop()
+        db.commit()
+
+class TestClientLevelOps(unittest.TestCase):
+
+    def testRun(self):
+        db = DAL('sqlite:memory:')
+        db.define_table('t', Field('a'))
+        db.commit()
+        db.t.insert(a="test")
+        rows1 = db(db.t.id>0).select()
+        rows2 = db(db.t.id>0).select()
+        rows3 = rows1 & rows2
+        assert len(rows3) == 2
+        rows4 = rows1 | rows2
+        assert len(rows4) == 1
+        rows5 = rows1.find(lambda row: row.a=="test")
+        assert len(rows5) == 1
+        rows6 = rows2.exclude(lambda row: row.a=="test")
+        assert len(rows6) == 1
+        rows7 = rows5.sort(lambda row: row.a)
+        assert len(rows7) == 1
+        db.t.drop()
+        db.commit()
+
+
+class TestVirtualFields(unittest.TestCase):
+
+    def testRun(self):
+        db = DAL('sqlite:memory:')
+        db.define_table('t', Field('a'))
+        db.commit()
+        db.t.insert(a="test")
+        class Compute:
+            def a_upper(row): return row.t.a.upper()
+        db.t.virtualfields.append(Compute())
+        assert db(db.t.id>0).select().first().a_upper == 'TEST'
+        db.t.drop()
+        db.commit()
+
+
+if __name__ == '__main__':
+    unittest.main()
+    tearDownModule()

ADDED   gluon/tests/test_html.py
Index: gluon/tests/test_html.py
==================================================================
--- /dev/null
+++ gluon/tests/test_html.py
@@ -0,0 +1,122 @@
+#!/bin/python
+# -*- coding: utf-8 -*-
+
+"""
+    Unit tests for gluon.html
+"""
+
+import sys
+import os
+if os.path.isdir('gluon'):
+    sys.path.append(os.path.realpath('gluon'))
+else:
+    sys.path.append(os.path.realpath('../'))
+
+import unittest
+from html import *
+
+
+class TestBareHelpers(unittest.TestCase):
+
+    def testRun(self):
+        self.assertEqual(BR(_a='1', _b='2').xml(), '<br a="1" b="2" />')
+        self.assertEqual(EMBED(_a='1', _b='2').xml(),
+                         '<embed a="1" b="2" />')
+        self.assertEqual(HR(_a='1', _b='2').xml(), '<hr a="1" b="2" />')
+        self.assertEqual(IMG(_a='1', _b='2').xml(),
+                         '<img a="1" b="2" />')
+        self.assertEqual(INPUT(_a='1', _b='2').xml(),
+                         '<input a="1" b="2" type="text" />')
+        self.assertEqual(LINK(_a='1', _b='2').xml(),
+                         '<link a="1" b="2" />')
+        self.assertEqual(META(_a='1', _b='2').xml(),
+                         '<meta a="1" b="2" />')
+
+        self.assertEqual(A('<>', _a='1', _b='2').xml(),
+                         '<a a="1" b="2"><></a>')
+        self.assertEqual(B('<>', _a='1', _b='2').xml(),
+                         '<b a="1" b="2"><></b>')
+        self.assertEqual(BODY('<>', _a='1', _b='2').xml(),
+                         '<body a="1" b="2"><></body>')
+        self.assertEqual(CENTER('<>', _a='1', _b='2').xml(),
+                         '<center a="1" b="2"><></center>')
+        self.assertEqual(DIV('<>', _a='1', _b='2').xml(),
+                         '<div a="1" b="2"><></div>')
+        self.assertEqual(EM('<>', _a='1', _b='2').xml(),
+                         '<em a="1" b="2"><></em>')
+        self.assertEqual(FIELDSET('<>', _a='1', _b='2').xml(),
+                         '<fieldset a="1" b="2"><></fieldset>')
+        self.assertEqual(FORM('<>', _a='1', _b='2').xml(),
+                         '<form a="1" action="" b="2" enctype="multipart/form-data" method="post"><></form>')
+        self.assertEqual(H1('<>', _a='1', _b='2').xml(),
+                         '<h1 a="1" b="2"><></h1>')
+        self.assertEqual(H2('<>', _a='1', _b='2').xml(),
+                         '<h2 a="1" b="2"><></h2>')
+        self.assertEqual(H3('<>', _a='1', _b='2').xml(),
+                         '<h3 a="1" b="2"><></h3>')
+        self.assertEqual(H4('<>', _a='1', _b='2').xml(),
+                         '<h4 a="1" b="2"><></h4>')
+        self.assertEqual(H5('<>', _a='1', _b='2').xml(),
+                         '<h5 a="1" b="2"><></h5>')
+        self.assertEqual(H6('<>', _a='1', _b='2').xml(),
+                         '<h6 a="1" b="2"><></h6>')
+        self.assertEqual(HEAD('<>', _a='1', _b='2').xml(),
+                         '<head a="1" b="2"><></head>')
+        self.assertEqual(HTML('<>', _a='1', _b='2').xml(),
+                         '<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">\n<html a="1" b="2" lang="en"><></html>')
+        self.assertEqual(IFRAME('<>', _a='1', _b='2').xml(),
+                         '<iframe a="1" b="2"><></iframe>')
+        self.assertEqual(LABEL('<>', _a='1', _b='2').xml(),
+                         '<label a="1" b="2"><></label>')
+        self.assertEqual(LI('<>', _a='1', _b='2').xml(),
+                         '<li a="1" b="2"><></li>')
+        self.assertEqual(OBJECT('<>', _a='1', _b='2').xml(),
+                         '<object a="1" b="2"><></object>')
+        self.assertEqual(OL('<>', _a='1', _b='2').xml(),
+                         '<ol a="1" b="2"><li><></li></ol>')
+        self.assertEqual(OPTION('<>', _a='1', _b='2').xml(),
+                         '<option a="1" b="2" value="<>"><>' + \
+                         '</option>')
+        self.assertEqual(P('<>', _a='1', _b='2').xml(),
+                         '<p a="1" b="2"><></p>')
+        self.assertEqual(PRE('<>', _a='1', _b='2').xml(),
+                         '<pre a="1" b="2"><></pre>')
+        self.assertEqual(SCRIPT('<>', _a='1', _b='2').xml(),
+                         '''<script a="1" b="2"><!--
+<>
+//--></script>''')
+        self.assertEqual(SELECT('<>', _a='1', _b='2').xml(),
+                         '<select a="1" b="2">'+ \
+                         '<option value="<>"><></option></select>')
+        self.assertEqual(SPAN('<>', _a='1', _b='2').xml(),
+                         '<span a="1" b="2"><></span>')
+        self.assertEqual(STYLE('<>', _a='1', _b='2').xml(),
+                         '<style a="1" b="2"><!--/*--><![CDATA[/*><!--*/\n<>\n/*]]>*/--></style>')
+        self.assertEqual(TABLE('<>', _a='1', _b='2').xml(),
+                         '<table a="1" b="2"><tr><td><></td></tr>' + \
+                         '</table>')
+        self.assertEqual(TBODY('<>', _a='1', _b='2').xml(),
+                         '<tbody a="1" b="2"><tr><td><></td></tr></tbody>')
+        self.assertEqual(TD('<>', _a='1', _b='2').xml(),
+                         '<td a="1" b="2"><></td>')
+        self.assertEqual(TEXTAREA('<>', _a='1', _b='2').xml(),
+                        '<textarea a="1" b="2" cols="40" rows="10"><>' + \
+                        '</textarea>')
+        self.assertEqual(TFOOT('<>', _a='1', _b='2').xml(),
+                         '<tfoot a="1" b="2"><tr><td><></td></tr></tfoot>')
+        self.assertEqual(TH('<>', _a='1', _b='2').xml(),
+                         '<th a="1" b="2"><></th>')
+        self.assertEqual(THEAD('<>', _a='1', _b='2').xml(),
+                         '<thead a="1" b="2"><tr><td><></td></tr></thead>')
+        self.assertEqual(TITLE('<>', _a='1', _b='2').xml(),
+                         '<title a="1" b="2"><>')
+        self.assertEqual(TR('<>', _a='1', _b='2').xml(),
+                         '
    ')
+        self.assertEqual(TT('<>', _a='1', _b='2').xml(),
+                         '<>')
+        self.assertEqual(UL('<>', _a='1', _b='2').xml(),
+                         '
    • <>
    ')
+
+
+if __name__ == '__main__':
+    unittest.main()

ADDED   gluon/tests/test_is_url.py
Index: gluon/tests/test_is_url.py
==================================================================
--- /dev/null
+++ gluon/tests/test_is_url.py
@@ -0,0 +1,644 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+"""
+Unit tests for IS_URL()
+"""
+
+import sys
+import os
+if os.path.isdir('gluon'):
+    sys.path.append(os.path.realpath('gluon'))
+else:
+    sys.path.append(os.path.realpath('../'))
+
+import unittest
+from validators import IS_URL, IS_HTTP_URL, IS_GENERIC_URL, \
+    unicode_to_ascii_authority
+
+
+class TestIsUrl(unittest.TestCase):
+
+    def testModeHttp(self):
+
+        # defaults to mode='http'
+
+        x = IS_URL()
+        self.assertEqual(x('http://google.ca'), ('http://google.ca',
+                         None))
+        self.assertEqual(x('google.ca'), ('http://google.ca', None))
+        self.assertEqual(x('google.ca:80'), ('http://google.ca:80',
+                         None))
+        self.assertEqual(x('unreal.blargg'), ('unreal.blargg',
+                         'enter a valid URL'))
+        self.assertEqual(x('google..ca'), ('google..ca', 'enter a valid URL'))
+        self.assertEqual(x('google.ca..'), ('google.ca..', 'enter a valid URL'))
+
+        # explicit use of 'http' mode
+
+        x = IS_URL(mode='http')
+        self.assertEqual(x('http://google.ca'), ('http://google.ca',
+                         None))
+        self.assertEqual(x('google.ca'), ('http://google.ca', None))
+        self.assertEqual(x('google.ca:80'), ('http://google.ca:80',
+                         None))
+        self.assertEqual(x('unreal.blargg'), ('unreal.blargg',
+                         'enter a valid URL'))
+
+        # prepends 'https' instead of 'http'
+
+        x = IS_URL(mode='http', prepend_scheme='https')
+        self.assertEqual(x('http://google.ca'), ('http://google.ca',
+                         None))
+        self.assertEqual(x('google.ca'), ('https://google.ca', None))
+        self.assertEqual(x('google.ca:80'), ('https://google.ca:80',
+                         None))
+        self.assertEqual(x('unreal.blargg'), ('unreal.blargg',
+                         'enter a valid URL'))
+
+        # prepending disabled
+
+        x = IS_URL(prepend_scheme=None)
+        self.assertEqual(x('http://google.ca'), ('http://google.ca',
+                         None))
+        self.assertEqual(x('google.ca'), ('google.ca', None))
+        self.assertEqual(x('google.ca:80'), ('google.ca:80', None))
+        self.assertEqual(x('unreal.blargg'), ('unreal.blargg',
+                         'enter a valid URL'))
+
+        # custom allowed_schemes
+
+        x = IS_URL(mode='http', allowed_schemes=[None, 'http'])
+        self.assertEqual(x('http://google.ca'), ('http://google.ca',
+                         None))
+        self.assertEqual(x('https://google.ca'), ('https://google.ca',
+                         'enter a valid URL'))
+        self.assertEqual(x('google.ca'), ('http://google.ca', None))
+        self.assertEqual(x('google.ca:80'), ('http://google.ca:80',
+                         None))
+        self.assertEqual(x('unreal.blargg'), ('unreal.blargg',
+                         'enter a valid URL'))
+
+        # custom allowed_schemes, excluding None
+
+        x = IS_URL(allowed_schemes=['http'])
+        self.assertEqual(x('http://google.ca'), ('http://google.ca',
+                         None))
+        self.assertEqual(x('https://google.ca'), ('https://google.ca',
+                         'enter a valid URL'))
+        self.assertEqual(x('google.ca'), ('google.ca', 'enter a valid URL'))
+        self.assertEqual(x('google.ca:80'), ('google.ca:80',
+                         'enter a valid URL'))
+        self.assertEqual(x('unreal.blargg'), ('unreal.blargg',
+                         'enter a valid URL'))
+
+        # custom allowed_schemes and prepend_scheme
+
+        x = IS_URL(allowed_schemes=[None, 'https'],
+                   prepend_scheme='https')
+        self.assertEqual(x('http://google.ca'), ('http://google.ca',
+                         'enter a valid URL'))
+        self.assertEqual(x('https://google.ca'), ('https://google.ca',
+                         None))
+        self.assertEqual(x('google.ca'), ('https://google.ca', None))
+        self.assertEqual(x('google.ca:80'), ('https://google.ca:80',
+                         None))
+        self.assertEqual(x('unreal.blargg'), ('unreal.blargg',
+                         'enter a valid URL'))
+
+        # Now any URL requiring prepending will fail, but prepending is still
+        # enabled!
+
+        x = IS_URL(allowed_schemes=['http'])
+        self.assertEqual(x('google.ca'), ('google.ca', 'enter a valid URL'))
+
+    def testModeGeneric(self):
+
+        # 'generic' mode
+
+        x = IS_URL(mode='generic')
+        self.assertEqual(x('http://google.ca'), ('http://google.ca',None))
+        self.assertEqual(x('google.ca'), ('google.ca', None))
+        self.assertEqual(x('google.ca:80'), ('http://google.ca:80',None))
+        self.assertEqual(x('blargg://unreal'), ('blargg://unreal',
+                         'enter a valid URL'))
+
+        # 'generic' mode with custom allowed_schemes that still includes
+        # 'http' (the default for prepend_scheme)
+
+        x = IS_URL(mode='generic', allowed_schemes=['http', 'blargg'])
+        self.assertEqual(x('http://google.ca'), ('http://google.ca',
+                         None))
+        self.assertEqual(x('ftp://google.ca'), ('ftp://google.ca',
+                         'enter a valid URL'))
+        self.assertEqual(x('google.ca'), ('google.ca', 'enter a valid URL'))
+        self.assertEqual(x('google.ca:80'), ('google.ca:80',
+                         'enter a valid URL'))
+        self.assertEqual(x('blargg://unreal'), ('blargg://unreal',
+                         None))
+
+        # 'generic' mode with overriden prepend_scheme
+
+        x = IS_URL(mode='generic', prepend_scheme='ftp')
+        self.assertEqual(x('http://google.ca'), ('http://google.ca',
+                         None))
+        self.assertEqual(x('ftp://google.ca'), ('ftp://google.ca',
+                         None))
+        self.assertEqual(x('google.ca'), ('google.ca', None))
+        self.assertEqual(x('google.ca:80'), ('ftp://google.ca:80',
+                         None))
+        self.assertEqual(x('blargg://unreal'), ('blargg://unreal',
+                         'enter a valid URL'))
+
+        # 'generic' mode with overriden allowed_schemes and prepend_scheme
+
+        x = IS_URL(mode='generic', allowed_schemes=[None, 'ftp', 'ftps'
+                   ], prepend_scheme='ftp')
+        self.assertEqual(x('http://google.ca'), ('http://google.ca',
+                         'enter a valid URL'))
+        self.assertEqual(x('google.ca'), ('google.ca', None))
+        self.assertEqual(x('ftp://google.ca'), ('ftp://google.ca',
+                         None))
+        self.assertEqual(x('google.ca:80'), ('ftp://google.ca:80',
+                         None))
+        self.assertEqual(x('blargg://unreal'), ('blargg://unreal',
+                         'enter a valid URL'))
+
+        # Now any URL requiring prepending will fail, but prepending is still
+        # enabled!
+
+        x = IS_URL(mode='generic', allowed_schemes=['http'])
+        self.assertEqual(x('google.ca'), ('google.ca', 'enter a valid URL'))
+
+    def testExceptionalUse(self):
+
+        # mode must be in set ['http', 'generic']
+
+        try:
+            x = IS_URL(mode='ftp')
+            x('http://www.google.ca')
+        except Exception, e:
+            if str(e) != "invalid mode 'ftp' in IS_URL":
+                self.fail('Wrong exception: ' + str(e))
+        else:
+            self.fail("Accepted invalid mode: 'ftp'")
+
+        # allowed_schemes in 'http' mode must be in set [None, 'http', 'https']
+
+        try:
+            x = IS_URL(allowed_schemes=[None, 'ftp', 'ftps'],
+                       prepend_scheme='ftp')
+            x('http://www.benn.ca')  # we can only reasonably know about the
+                                     # error at calling time
+        except Exception, e:
+            if str(e)\
+                 != "allowed_scheme value 'ftp' is not in [None, 'http', 'https']":
+                self.fail('Wrong exception: ' + str(e))
+        else:
+            self.fail("Accepted invalid allowed_schemes: [None, 'ftp', 'ftps']")
+
+        # prepend_scheme's value must be in allowed_schemes (default for 'http'
+        # mode is [None, 'http', 'https'])
+
+        try:
+            x = IS_URL(prepend_scheme='ftp')
+            x('http://www.benn.ca')  # we can only reasonably know about the
+                                     # error at calling time
+        except Exception, e:
+            if str(e)\
+                 != "prepend_scheme='ftp' is not in allowed_schemes=[None, 'http', 'https']":
+                self.fail('Wrong exception: ' + str(e))
+        else:
+            self.fail("Accepted invalid prepend_scheme: 'ftp'")
+
+        # custom allowed_schemes that excludes 'http', so prepend_scheme must be
+        # specified!
+
+        try:
+            x = IS_URL(allowed_schemes=[None, 'https'])
+        except Exception, e:
+            if str(e)\
+                 != "prepend_scheme='http' is not in allowed_schemes=[None, 'https']":
+                self.fail('Wrong exception: ' + str(e))
+        else:
+            self.fail("Accepted invalid prepend_scheme: 'http'")
+
+        # prepend_scheme must be in allowed_schemes
+
+        try:
+            x = IS_URL(allowed_schemes=[None, 'http'],
+                       prepend_scheme='https')
+        except Exception, e:
+            if str(e)\
+                 != "prepend_scheme='https' is not in allowed_schemes=[None, 'http']":
+                self.fail('Wrong exception: ' + str(e))
+        else:
+            self.fail("Accepted invalid prepend_scheme: 'https'")
+
+        # prepend_scheme's value (default is 'http') must be in allowed_schemes
+
+        try:
+            x = IS_URL(mode='generic', allowed_schemes=[None, 'ftp',
+                       'ftps'])
+        except Exception, e:
+            if str(e)\
+                 != "prepend_scheme='http' is not in allowed_schemes=[None, 'ftp', 'ftps']":
+                self.fail('Wrong exception: ' + str(e))
+        else:
+            self.fail("Accepted invalid prepend_scheme: 'http'")
+
+        # prepend_scheme's value must be in allowed_schemes, which by default
+        # is all schemes that really exist
+
+        try:
+            x = IS_URL(mode='generic', prepend_scheme='blargg')
+            x('http://www.google.ca')  # we can only reasonably know about the error at calling time
+        except Exception, e:
+            if not str(e).startswith(
+                    "prepend_scheme='blargg' is not in allowed_schemes="):
+                self.fail('Wrong exception: ' + str(e))
+        else:
+            self.fail("Accepted invalid prepend_scheme: 'blargg'")
+
+        # prepend_scheme's value must be in allowed_schemes
+
+        try:
+            x = IS_URL(mode='generic', allowed_schemes=[None, 'http'],
+                       prepend_scheme='blargg')
+        except Exception, e:
+            if str(e)\
+                 != "prepend_scheme='blargg' is not in allowed_schemes=[None, 'http']":
+                self.fail('Wrong exception: ' + str(e))
+        else:
+            self.fail("Accepted invalid prepend_scheme: 'blargg'")
+
+        # Not inluding None in the allowed_schemes essentially disabled
+        # prepending, so even though
+        # prepend_scheme has the invalid value 'http', we don't care!
+
+        x = IS_URL(allowed_schemes=['https'], prepend_scheme='https')
+        self.assertEqual(x('google.ca'), ('google.ca', 'enter a valid URL'))
+
+        # Not inluding None in the allowed_schemes essentially disabled prepending, so even though
+        # prepend_scheme has the invalid value 'http', we don't care!
+
+        x = IS_URL(mode='generic', allowed_schemes=['https'],
+            prepend_scheme='https')
+        self.assertEqual(x('google.ca'), ('google.ca', 'enter a valid URL'))
+
+
+# ##############################################################################
+
+
+class TestIsGenericUrl(unittest.TestCase):
+
+    x = IS_GENERIC_URL()
+
+    def testInvalidUrls(self):
+        urlsToCheckA = []
+        for i in range(0, 32) + [127]:
+
+            # Control characters are disallowed in any part of a URL
+
+            urlsToCheckA.append('http://www.benn' + chr(i) + '.ca')
+
+        urlsToCheckB = [
+            None,
+            '',
+            'http://www.no spaces allowed.com',
+            'http://www.benn.ca/no spaces allowed/',
+            'http://www.benn.ca/angle_bracket/',
+            'http://www.benn.ca/invalid%character',
+            'http://www.benn.ca/illegal%%20use',
+            'http://www.benn.ca/illegaluse%',
+            'http://www.benn.ca/illegaluse%0',
+            'http://www.benn.ca/illegaluse%x',
+            'http://www.benn.ca/ill%egaluse%x',
+            'http://www.benn.ca/double"quote/',
+            'http://www.curly{brace.com',
+            'http://www.benn.ca/curly}brace/',
+            'http://www.benn.ca/or|symbol/',
+            'http://www.benn.ca/back\slash',
+            'http://www.benn.ca/the^carat',
+            'http://left[bracket.me',
+            'http://www.benn.ca/right]bracket',
+            'http://www.benn.ca/angle`quote',
+            '-ttp://www.benn.ca',
+            '+ttp://www.benn.ca',
+            '.ttp://www.benn.ca',
+            '9ttp://www.benn.ca',
+            'ht;tp://www.benn.ca',
+            'ht@tp://www.benn.ca',
+            'ht&tp://www.benn.ca',
+            'ht=tp://www.benn.ca',
+            'ht$tp://www.benn.ca',
+            'ht,tp://www.benn.ca',
+            'ht:tp://www.benn.ca',
+            'htp://invalid_scheme.com',
+            ]
+
+        failures = []
+
+        for url in urlsToCheckA + urlsToCheckB:
+            if self.x(url)[1] == None:
+                failures.append('Incorrectly accepted: ' + str(url))
+
+        if len(failures) > 0:
+            self.fail(failures)
+
+    def testValidUrls(self):
+        urlsToCheck = [
+            'ftp://ftp.is.co.za/rfc/rfc1808.txt',
+            'gopher://spinaltap.micro.umn.edu/00/Weather/California/Los%20Angeles',
+            'http://www.math.uio.no/faq/compression-faq/part1.html',
+            'mailto:mduerst@ifi.unizh.ch',
+            'news:comp.infosystems.www.servers.unix',
+            'telnet://melvyl.ucop.edu/',
+            'hTTp://www.benn.ca',
+            '%66%74%70://ftp.is.co.za/rfc/rfc1808.txt',
+            '%46%74%70://ftp.is.co.za/rfc/rfc1808.txt',
+            '/faq/compression-faq/part1.html',
+            'google.com',
+            'www.google.com:8080',
+            '128.127.123.250:8080',
+            'blargg:ping',
+            'http://www.benn.ca',
+            'http://benn.ca',
+            'http://amazon.com/books/',
+            'https://amazon.com/movies',
+            'rtsp://idontknowthisprotocol',
+            'HTTP://allcaps.com',
+            'http://localhost',
+            'http://localhost#fragment',
+            'http://localhost/hello',
+            'http://localhost/hello?query=True',
+            'http://localhost/hello/',
+            'http://localhost:8080',
+            'http://localhost:8080/',
+            'http://localhost:8080/hello',
+            'http://localhost:8080/hello/',
+            'file:///C:/Documents%20and%20Settings/Jonathan/Desktop/view.py'
+                ,
+            ]
+
+        failures = []
+
+        for url in urlsToCheck:
+            if self.x(url)[1] != None:
+                failures.append('Incorrectly rejected: ' + str(url))
+
+        if len(failures) > 0:
+            self.fail(failures)
+
+    def testPrepending(self):
+        # Does not prepend scheme for abbreviated domains
+        self.assertEqual(self.x('google.ca'), ('google.ca', None))
+
+        # Does not prepend scheme for abbreviated domains
+        self.assertEqual(self.x('google.ca:8080'), ('google.ca:8080', None))
+
+        # Does not prepend when scheme already exists
+        self.assertEqual(self.x('https://google.ca'),
+                         ('https://google.ca', None))
+
+        # Does not prepend if None type is not specified in allowed_scheme,
+        # because a scheme is required
+
+        y = IS_GENERIC_URL(allowed_schemes=['http', 'blargg'],
+            prepend_scheme='http')
+        self.assertEqual(y('google.ca'), ('google.ca', 'enter a valid URL'))
+
+
+# ##############################################################################
+
+
+class TestIsHttpUrl(unittest.TestCase):
+
+    x = IS_HTTP_URL()
+
+    def testInvalidUrls(self):
+        urlsToCheck = [
+            None,
+            '',
+            'http://invalid' + chr(2) + '.com',
+            'htp://invalid_scheme.com',
+            'blargg://invalid_scheme.com',
+            'http://-123.com',
+            'http://abcd-.ca',
+            'http://-abc123-.me',
+            'http://www.dom&ain.com/',
+            'http://www.dom=ain.com/',
+            'http://www.benn.ca&',
+            'http://%62%65%6E%6E%2E%63%61/path',
+            'http://.domain.com',
+            'http://.domain.com./path',
+            'http://domain..com',
+            'http://domain...at..com',
+            'http://domain.com..',
+            'http://domain.com../path',
+            'http://domain.3m',
+            'http://domain.-3m',
+            'http://domain.3m-',
+            'http://domain.-3m-',
+            'http://domain.co&m',
+            'http://domain.m3456',
+            'http://domain.m-3/path#fragment',
+            'http://domain.m---k/path?query=value',
+            'http://23.32..',
+            'http://23..32.56.0',
+            'http://38997.222.999',
+            'http://23.32.56.99.',
+            'http://.23.32.56.99',
+            'http://.23.32.56.99.',
+            'http://w127.123.0.256:8080',
+            'http://23.32.56.99:abcd',
+            'http://23.32.56.99:23cd',
+            'http://google.com:cd22',
+            'http://23.32:1300.56.99',
+            'http://www.yahoo:1600.com',
+            'path/segment/without/starting/slash',
+            'http://www.math.uio.no;param=3',
+            '://ABC.com:/%7esmith/home.html',
+            ]
+
+        failures = []
+
+        for url in urlsToCheck:
+            if self.x(url)[1] == None:
+                failures.append('Incorrectly accepted: ' + str(url))
+
+        if len(failures) > 0:
+            self.fail(failures)
+
+    def testValidUrls(self):
+
+        urlsToCheck = [
+            'http://abc.com:80/~smith/home.html',
+            'http://ABC.com/%7Esmith/home.html',
+            'http://ABC.com:/%7esmith/home.html',
+            'http://www.math.uio.no/faq/compression-faq/part1.html',
+            '//google.ca/faq/compression-faq/part1.html',
+            '//google.ca/faq;param=3',
+            '//google.ca/faq/index.html?query=5',
+            '//google.ca/faq/index.html;param=value?query=5',
+            '/faq/compression-faq/part1.html',
+            '/faq;param=3',
+            '/faq/index.html?query=5',
+            '/faq/index.html;param=value?query=5',
+            'google.com',
+            'benn.ca/init/default',
+            'benn.ca/init;param=value/default?query=value',
+            'http://host-name---with-dashes.me',
+            'http://www.host-name---with-dashes.me',
+            'http://a.com',
+            'http://a.3.com',
+            'http://a.bl-ck.com',
+            'http://bl-e.b.com',
+            'http://host123with456numbers.ca',
+            'http://1234567890.com.',
+            'http://1234567890.com./path',
+            'http://google.com./path',
+            'http://domain.xn--0zwm56d',
+            'http://127.123.0.256',
+            'http://127.123.0.256/document/drawer',
+            '127.123.0.256/document/',
+            '156.212.123.100',
+            'http://www.google.com:180200',
+            'http://www.google.com:8080/path',
+            'http://www.google.com:8080',
+            '//www.google.com:8080',
+            'www.google.com:8080',
+            'http://127.123.0.256:8080/path',
+            '//127.123.0.256:8080',
+            '127.123.0.256:8080',
+            'http://example.me??query=value?',
+            'http://a.com',
+            'http://3.com',
+            'http://www.benn.ca',
+            'http://benn.ca',
+            'http://amazon.com/books/',
+            'https://amazon.com/movies',
+            'hTTp://allcaps.com',
+            'http://localhost',
+            'HTTPS://localhost.',
+            'http://localhost#fragment',
+            'http://localhost/hello;param=value',
+            'http://localhost/hello;param=value/hi;param2=value2;param3=value3'
+                ,
+            'http://localhost/hello?query=True',
+            'http://www.benn.ca/hello;param=value/hi;param2=value2;param3=value3/index.html?query=3',
+            'http://localhost/hello/?query=1500&five=6',
+            'http://localhost:8080',
+            'http://localhost:8080/',
+            'http://localhost:8080/hello',
+            'http://localhost:8080/hello%20world/',
+            'http://www.a.3.be-nn.5.ca',
+            'http://www.amazon.COM',
+            ]
+
+        failures = []
+
+        for url in urlsToCheck:
+            if self.x(url)[1] != None:
+                failures.append('Incorrectly rejected: ' + str(url))
+
+        if len(failures) > 0:
+            self.fail(failures)
+
+    def testPrepending(self):
+        # prepends scheme for abbreviated domains
+        self.assertEqual(self.x('google.ca'), ('http://google.ca', None))
+
+        # prepends scheme for abbreviated domains
+        self.assertEqual(self.x('google.ca:8080'),
+                         ('http://google.ca:8080', None))
+
+        # does not prepend when scheme already exists
+        self.assertEqual(self.x('https://google.ca'),
+                         ('https://google.ca', None))
+
+        y = IS_HTTP_URL(prepend_scheme='https', allowed_schemes=[None, 'https'])
+        self.assertEqual(y('google.ca'), ('https://google.ca', None))  # prepends https if asked
+
+        z = IS_HTTP_URL(prepend_scheme=None)
+        self.assertEqual(z('google.ca:8080'), ('google.ca:8080', None))  # prepending disabled
+
+        try:
+            IS_HTTP_URL(prepend_scheme='mailto')
+        except Exception, e:
+            if str(e)\
+                 != "prepend_scheme='mailto' is not in allowed_schemes=[None, 'http', 'https']":
+                self.fail('Wrong exception: ' + str(e))
+        else:
+            self.fail("Got invalid prepend_scheme: 'mailto'")
+
+        # Does not prepend if None type is not specified in allowed_scheme, because a scheme is required
+
+        a = IS_HTTP_URL(allowed_schemes=['http'])
+        self.assertEqual(a('google.ca'), ('google.ca', 'enter a valid URL'))
+        self.assertEqual(a('google.ca:80'), ('google.ca:80',
+                         'enter a valid URL'))
+
+class TestUnicode(unittest.TestCase):
+    x = IS_URL()
+    y = IS_URL(allowed_schemes=['https'], prepend_scheme='https') #excludes the option for abbreviated URLs with no scheme
+    z = IS_URL(prepend_scheme=None) # disables prepending the scheme in the return value
+
+
+    def testUnicodeToAsciiUrl(self):
+        self.assertEquals(unicode_to_ascii_authority(u'www.Alliancefran\xe7aise.nu'), 'www.xn--alliancefranaise-npb.nu')
+        self.assertEquals(unicode_to_ascii_authority(u'www.benn.ca'), 'www.benn.ca')
+        self.assertRaises(UnicodeError, unicode_to_ascii_authority, u'\u4e2d'*1000) #label is too long
+
+
+    def testValidUrls(self):
+        self.assertEquals(self.x(u'www.Alliancefrancaise.nu'), ('http://www.Alliancefrancaise.nu', None))
+        self.assertEquals(self.x(u'www.Alliancefran\xe7aise.nu'), ('http://www.xn--alliancefranaise-npb.nu', None))
+        self.assertEquals(self.x(u'www.Alliancefran\xe7aise.nu:8080'), ('http://www.xn--alliancefranaise-npb.nu:8080', None))
+        self.assertEquals(self.x(u'http://www.Alliancefran\xe7aise.nu'), ('http://www.xn--alliancefranaise-npb.nu', None))
+        self.assertEquals(self.x(u'http://www.Alliancefran\xe7aise.nu/parnaise/blue'), ('http://www.xn--alliancefranaise-npb.nu/parnaise/blue', None))
+        self.assertEquals(self.x(u'http://www.Alliancefran\xe7aise.nu/parnaise/blue#fragment'), ('http://www.xn--alliancefranaise-npb.nu/parnaise/blue#fragment', None))
+        self.assertEquals(self.x(u'http://www.Alliancefran\xe7aise.nu/parnaise/blue?query=value#fragment'), ('http://www.xn--alliancefranaise-npb.nu/parnaise/blue?query=value#fragment', None))
+        self.assertEquals(self.x(u'http://www.Alliancefran\xe7aise.nu:8080/parnaise/blue?query=value#fragment'), ('http://www.xn--alliancefranaise-npb.nu:8080/parnaise/blue?query=value#fragment', None))
+        self.assertEquals(self.x(u'www.Alliancefran\xe7aise.nu/parnaise/blue?query=value#fragment'), ('http://www.xn--alliancefranaise-npb.nu/parnaise/blue?query=value#fragment', None))
+        self.assertEquals(self.x(u'http://\u4e2d\u4fd4.com'), ('http://xn--fiq13b.com', None))
+        self.assertEquals(self.x(u'http://\u4e2d\u4fd4.com/\u4e86'), ('http://xn--fiq13b.com/%4e%86', None))
+        self.assertEquals(self.x(u'http://\u4e2d\u4fd4.com/\u4e86?query=\u4e86'), ('http://xn--fiq13b.com/%4e%86?query=%4e%86', None))
+        self.assertEquals(self.x(u'http://\u4e2d\u4fd4.com/\u4e86?query=\u4e86#fragment'), ('http://xn--fiq13b.com/%4e%86?query=%4e%86#fragment', None))
+        self.assertEquals(self.x(u'http://\u4e2d\u4fd4.com?query=\u4e86#fragment'), ('http://xn--fiq13b.com?query=%4e%86#fragment', None))
+        self.assertEquals(self.x(u'http://B\xfccher.ch'), ('http://xn--bcher-kva.ch', None))
+        self.assertEquals(self.x(u'http://\xe4\xf6\xfc\xdf.com'), ('http://xn--ss-uia6e4a.com', None))
+        self.assertEquals(self.x(u'http://visegr\xe1d.com'), ('http://xn--visegrd-mwa.com', None))
+        self.assertEquals(self.x(u'http://h\xe1zipatika.com'), ('http://xn--hzipatika-01a.com', None))
+        self.assertEquals(self.x(u'http://www.\xe7ukurova.com'), ('http://www.xn--ukurova-txa.com', None))
+        self.assertEquals(self.x(u'http://nixier\xf6hre.nixieclock-tube.com'), ('http://xn--nixierhre-57a.nixieclock-tube.com', None))
+        self.assertEquals(self.x(u'google.ca.'), ('http://google.ca.', None))
+
+        self.assertEquals(self.y(u'https://google.ca'), ('https://google.ca', None))
+        self.assertEquals(self.y(u'https://\u4e2d\u4fd4.com'), ('https://xn--fiq13b.com', None))
+
+        self.assertEquals(self.z(u'google.ca'), ('google.ca', None))
+
+
+    def testInvalidUrls(self):
+        self.assertEquals(self.x(u'://ABC.com'), (u'://ABC.com', 'enter a valid URL'))
+        self.assertEquals(self.x(u'http://\u4e2d\u4fd4.dne'), (u'http://\u4e2d\u4fd4.dne', 'enter a valid URL'))
+        self.assertEquals(self.x(u'https://google.dne'), (u'https://google.dne', 'enter a valid URL'))
+        self.assertEquals(self.x(u'https://google..ca'), (u'https://google..ca', 'enter a valid URL'))
+        self.assertEquals(self.x(u'google..ca'), (u'google..ca', 'enter a valid URL'))
+        self.assertEquals(self.x(u'http://' + u'\u4e2d'*1000 + u'.com'), (u'http://' + u'\u4e2d'*1000 + u'.com', 'enter a valid URL'))
+
+        self.assertEquals(self.x(u'http://google.com#fragment_\u4e86'), (u'http://google.com#fragment_\u4e86', 'enter a valid URL'))
+        self.assertEquals(self.x(u'http\u4e86://google.com'), (u'http\u4e86://google.com', 'enter a valid URL'))
+        self.assertEquals(self.x(u'http\u4e86://google.com#fragment_\u4e86'), (u'http\u4e86://google.com#fragment_\u4e86', 'enter a valid URL'))
+
+        self.assertEquals(self.y(u'http://\u4e2d\u4fd4.com/\u4e86'), (u'http://\u4e2d\u4fd4.com/\u4e86', 'enter a valid URL'))
+        #self.assertEquals(self.y(u'google.ca'), (u'google.ca', 'enter a valid URL'))
+
+        self.assertEquals(self.z(u'invalid.domain..com'), (u'invalid.domain..com', 'enter a valid URL'))
+        self.assertEquals(self.z(u'invalid.\u4e2d\u4fd4.blargg'), (u'invalid.\u4e2d\u4fd4.blargg', 'enter a valid URL'))
+
+# ##############################################################################
+
+if __name__ == '__main__':
+    unittest.main()

ADDED   gluon/tests/test_router.py
Index: gluon/tests/test_router.py
==================================================================
--- /dev/null
+++ gluon/tests/test_router.py
@@ -0,0 +1,853 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""Unit tests for rewrite.py routers option"""
+
+import sys
+import os
+import unittest
+import tempfile
+import logging
+
+if os.path.isdir('gluon'):
+    sys.path.append(os.path.realpath('gluon')) # running from web2py base
+else:
+    sys.path.append(os.path.realpath('../')) # running from gluon/tests/
+
+from rewrite import load, filter_url, filter_err, get_effective_router, map_url_out
+from html import URL
+from fileutils import abspath
+from settings import global_settings
+from http import HTTP
+from storage import Storage
+
+logger = None
+oldcwd = None
+root = None
+
+def setUpModule():
+    def make_apptree():
+        "build a temporary applications tree"
+        #  applications/
+        os.mkdir(abspath('applications'))
+        #  applications/app/
+        for app in ('admin', 'examples', 'welcome'):
+            os.mkdir(abspath('applications', app))
+            #  applications/app/(controllers, static)
+            for subdir in ('controllers', 'static'):
+                os.mkdir(abspath('applications', app, subdir))
+        #  applications/admin/controllers/*.py
+        for ctr in ('appadmin', 'default', 'gae', 'mercurial', 'shell', 'wizard'):
+            open(abspath('applications', 'admin', 'controllers', '%s.py' % ctr), 'w').close()
+        #  applications/examples/controllers/*.py
+        for ctr in ('ajax_examples', 'appadmin', 'default', 'global', 'spreadsheet'):
+            open(abspath('applications', 'examples', 'controllers', '%s.py' % ctr), 'w').close()
+        #  applications/welcome/controllers/*.py
+        for ctr in ('appadmin', 'default'):
+            open(abspath('applications', 'welcome', 'controllers', '%s.py' % ctr), 'w').close()
+        #  create an app-specific routes.py for examples app
+        routes = open(abspath('applications', 'examples', 'routes.py'), 'w')
+        routes.write("routers=dict(examples=dict(default_function='exdef'))")
+        routes.close()
+        #  create language files for examples app
+        for lang in ('en', 'it'):
+            os.mkdir(abspath('applications', 'examples', 'static', lang))
+            open(abspath('applications', 'examples', 'static', lang, 'file'), 'w').close()
+
+    global oldcwd
+    if oldcwd is None:  # do this only once
+        oldcwd = os.getcwd()
+        if not os.path.isdir('gluon'):
+            os.chdir(os.path.realpath('../../'))    # run from web2py base directory
+        import main   # for initialization after chdir
+        global logger
+        logger = logging.getLogger('web2py.rewrite')
+        global_settings.applications_parent = tempfile.mkdtemp()
+        global root
+        root = global_settings.applications_parent
+        make_apptree()
+
+def tearDownModule():
+    global oldcwd
+    if oldcwd is not None:
+        os.chdir(oldcwd)
+        oldcwd = None
+
+
+class TestRouter(unittest.TestCase):
+    """ Tests the routers logic from gluon.rewrite """
+
+    def test_router_syntax(self):
+        """ Test router syntax error """
+        level = logger.getEffectiveLevel()
+        logger.setLevel(logging.CRITICAL)  # disable logging temporarily
+        self.assertRaises(SyntaxError, load, data='x:y')
+        self.assertRaises(SyntaxError, load, rdict=dict(BASE=dict(badkey="value")))
+        self.assertRaises(SyntaxError, load, rdict=dict(BASE=dict(), app=dict(default_application="name")))
+        try:
+            # 2.7+ only
+            self.assertRaisesRegexp(SyntaxError, "invalid syntax", 
+                load, data='x:y')
+            self.assertRaisesRegexp(SyntaxError, "unknown key", 
+                load, rdict=dict(BASE=dict(badkey="value")))
+            self.assertRaisesRegexp(SyntaxError, "BASE-only key", 
+                load, rdict=dict(BASE=dict(), app=dict(default_application="name")))
+        except AttributeError:
+            pass
+        logger.setLevel(level)
+
+    def test_router_null(self):
+        """ Tests the null router """
+        load(rdict=dict())
+        # app resolution
+        self.assertEqual(filter_url('http://domain.com/welcome', app=True), 'welcome')
+        self.assertEqual(filter_url('http://domain.com/', app=True), 'init')
+        # incoming
+        self.assertEqual(filter_url('http://domain.com/favicon.ico'), '%s/applications/init/static/favicon.ico' % root)
+        self.assertEqual(filter_url('http://domain.com/abc'), '/init/default/abc')
+        self.assertEqual(filter_url('http://domain.com/index/abc'), "/init/default/index ['abc']")
+        self.assertEqual(filter_url('http://domain.com/abc/def'), "/init/default/abc ['def']")
+        self.assertEqual(filter_url('http://domain.com/index/a%20bc'), "/init/default/index ['a bc']")
+        self.assertEqual(filter_url('http://domain.com/welcome/static/path/to/static'), "%s/applications/welcome/static/path/to/static" % root)
+        self.assertRaises(HTTP, filter_url, 'http://domain.com/welcome/static/bad/path/to/st~tic')
+        try:
+            # 2.7+ only
+            self.assertRaisesRegexp(HTTP, "400.*invalid static file", filter_url, 'http://domain.com/welcome/static/bad/path/to/st~tic')
+        except AttributeError:
+            pass
+        # outgoing
+        self.assertEqual(filter_url('http://domain.com/init/default/index', out=True), '/')
+        self.assertEqual(filter_url('http://domain.com/init/default/index/arg1', out=True), '/index/arg1')
+        self.assertEqual(filter_url('http://domain.com/init/default/abc', out=True), '/abc')
+        self.assertEqual(filter_url('http://domain.com/init/static/abc', out=True), '/init/static/abc')
+        self.assertEqual(filter_url('http://domain.com/init/appadmin/index', out=True), '/appadmin')
+        self.assertEqual(filter_url('http://domain.com/init/appadmin/abc', out=True), '/appadmin/abc')
+        self.assertEqual(filter_url('http://domain.com/init/admin/index', out=True), '/init/admin')
+        self.assertEqual(filter_url('http://domain.com/init/admin/abc', out=True), '/init/admin/abc')
+        self.assertEqual(filter_url('http://domain.com/admin/default/abc', out=True), '/admin/abc')
+
+    def test_router_specific(self):
+        """ 
+        Test app-specific routes.py 
+        
+        Note that make_apptree above created applications/examples/routes.py with a default_function.
+        """
+        load(rdict=dict())
+        self.assertEqual(filter_url('http://domain.com/welcome'), '/welcome/default/index')
+        self.assertEqual(filter_url('http://domain.com/examples'), '/examples/default/exdef')
+
+    def test_router_defapp(self):
+        """ Test the default-application function """
+        routers = dict(BASE=dict(default_application='welcome'))
+        load(rdict=routers)
+        # app resolution
+        self.assertEqual(filter_url('http://domain.com/welcome', app=True), 'welcome')
+        self.assertEqual(filter_url('http://domain.com/', app=True), 'welcome')
+        # incoming
+        self.assertEqual(filter_url('http://domain.com'), '/welcome/default/index')
+        self.assertEqual(filter_url('http://domain.com/'), '/welcome/default/index')
+        self.assertEqual(filter_url('http://domain.com/appadmin'), '/welcome/appadmin/index')
+        self.assertEqual(filter_url('http://domain.com/abc'), '/welcome/default/abc')
+        self.assertEqual(filter_url('http://domain.com/index/abc'), "/welcome/default/index ['abc']")
+        self.assertEqual(filter_url('http://domain.com/abc/def'), "/welcome/default/abc ['def']")
+        self.assertEqual(filter_url('http://domain.com/favicon.ico'), '%s/applications/welcome/static/favicon.ico' % root)
+        self.assertEqual(filter_url('http://domain.com/static/abc'), '%s/applications/welcome/static/abc' % root)
+        self.assertEqual(filter_url('http://domain.com/static/path/to/static'), "%s/applications/welcome/static/path/to/static" % root)
+        # outgoing
+        self.assertEqual(filter_url('http://domain.com/welcome/default/index', out=True), '/')
+        self.assertEqual(filter_url('http://domain.com/welcome/default/index/arg1', out=True), '/index/arg1')
+        self.assertEqual(filter_url('http://domain.com/welcome/default/abc', out=True), '/abc')
+        self.assertEqual(filter_url('http://domain.com/welcome/default/admin', out=True), '/default/admin')
+        self.assertEqual(filter_url('http://domain.com/welcome/static/abc', out=True), 
+            '/welcome/static/abc')
+        self.assertEqual(filter_url('http://domain.com/welcome/appadmin/index', out=True), '/appadmin')
+        self.assertEqual(filter_url('http://domain.com/welcome/appadmin/abc', out=True), '/appadmin/abc')
+        self.assertEqual(filter_url('http://domain.com/welcome/admin/index', out=True), '/welcome/admin')
+        self.assertEqual(filter_url('http://domain.com/welcome/admin/abc', out=True), '/welcome/admin/abc')
+        self.assertEqual(filter_url('http://domain.com/admin/default/abc', out=True), '/admin/abc')
+
+    def test_router_nodef(self):
+        """ Test no-default functions """
+        routers = dict(
+            BASE=dict(default_application='welcome'),
+            welcome=dict(controllers=None),
+        )
+        load(rdict=routers)
+        # outgoing
+        self.assertEqual(filter_url('http://domain.com/welcome/default/index', out=True), '/default')
+        self.assertEqual(filter_url('http://domain.com/welcome/default/index/arg1', out=True), '/default/index/arg1')
+        self.assertEqual(filter_url('http://domain.com/welcome/default/abc', out=True), '/default/abc')
+        self.assertEqual(filter_url('http://domain.com/welcome/static/abc', out=True), 
+            '/welcome/static/abc')
+        self.assertEqual(filter_url('http://domain.com/welcome/appadmin/index', out=True), '/appadmin')
+        self.assertEqual(filter_url('http://domain.com/welcome/appadmin/abc', out=True), '/appadmin/abc')
+        self.assertEqual(filter_url('http://domain.com/welcome/admin/index', out=True), '/welcome/admin')
+        self.assertEqual(filter_url('http://domain.com/welcome/admin/abc', out=True), '/welcome/admin/abc')
+        self.assertEqual(filter_url('http://domain.com/admin/default/abc', out=True), '/admin/abc')
+        # incoming
+        self.assertEqual(filter_url('http://domain.com'), '/welcome/default/index')
+        self.assertEqual(filter_url('http://domain.com/'), '/welcome/default/index')
+        self.assertEqual(filter_url('http://domain.com/appadmin'), '/welcome/appadmin/index')
+        self.assertEqual(filter_url('http://domain.com/abc'), '/welcome/abc/index')
+        self.assertEqual(filter_url('http://domain.com/index/abc'), "/welcome/index/abc")
+        self.assertEqual(filter_url('http://domain.com/abc/def'), "/welcome/abc/def")
+        self.assertEqual(filter_url('http://domain.com/abc/def/ghi'), "/welcome/abc/def ['ghi']")
+
+        routers = dict(
+            BASE=dict(default_application=None),
+        )
+        load(rdict=routers)
+        # outgoing
+        self.assertEqual(filter_url('http://domain.com/welcome/default/index', out=True), '/welcome')
+        self.assertEqual(filter_url('http://domain.com/welcome/default/index/arg1', out=True), '/welcome/index/arg1')
+        self.assertEqual(filter_url('http://domain.com/welcome/default/abc', out=True), '/welcome/abc')
+        self.assertEqual(filter_url('http://domain.com/welcome/static/abc', out=True), '/welcome/static/abc')
+        self.assertEqual(filter_url('http://domain.com/welcome/appadmin/index', out=True), '/welcome/appadmin')
+        self.assertEqual(filter_url('http://domain.com/welcome/appadmin/abc', out=True), '/welcome/appadmin/abc')
+        self.assertEqual(filter_url('http://domain.com/welcome/admin/index', out=True), '/welcome/admin')
+        self.assertEqual(filter_url('http://domain.com/welcome/admin/abc', out=True), '/welcome/admin/abc')
+        self.assertEqual(filter_url('http://domain.com/admin/default/abc', out=True), '/admin/abc')
+        # incoming
+        self.assertRaises(HTTP, filter_url, 'http://domain.com')
+        self.assertRaises(HTTP, filter_url, 'http://domain.com/appadmin')
+        try:
+            # 2.7+ only
+            self.assertRaisesRegexp(HTTP, "400.*invalid application", filter_url, 'http://domain.com')
+            self.assertRaisesRegexp(HTTP, "400.*invalid application", filter_url, 'http://domain.com/appadmin')
+        except AttributeError:
+            pass
+
+        routers = dict(
+            BASE=dict(default_application='welcome', applications=None),
+        )
+        load(rdict=routers)
+        # outgoing
+        self.assertEqual(filter_url('http://domain.com/welcome/default/index', out=True), '/welcome')
+        self.assertEqual(filter_url('http://domain.com/welcome/default/index/arg1', out=True), '/welcome/index/arg1')
+        self.assertEqual(filter_url('http://domain.com/welcome/default/abc', out=True), '/welcome/abc')
+        self.assertEqual(filter_url('http://domain.com/welcome/static/abc', out=True), '/welcome/static/abc')
+        self.assertEqual(filter_url('http://domain.com/welcome/appadmin/index', out=True), '/welcome/appadmin')
+        self.assertEqual(filter_url('http://domain.com/welcome/appadmin/abc', out=True), '/welcome/appadmin/abc')
+        self.assertEqual(filter_url('http://domain.com/welcome/admin/index', out=True), '/welcome/admin')
+        self.assertEqual(filter_url('http://domain.com/welcome/admin/abc', out=True), '/welcome/admin/abc')
+        self.assertEqual(filter_url('http://domain.com/admin/default/abc', out=True), '/admin/abc')
+        # incoming
+        self.assertEqual(filter_url('http://domain.com'), '/welcome/default/index')
+        self.assertEqual(filter_url('http://domain.com/'), '/welcome/default/index')
+        self.assertRaises(HTTP, filter_url, 'http://domain.com/appadmin')
+        try:
+            # 2.7+ only
+            self.assertRaisesRegexp(HTTP, "400.*unknown application: 'appadmin'", filter_url, 'http://domain.com/appadmin')
+        except AttributeError:
+            pass
+
+        routers = dict(
+            BASE=dict(default_application='welcome', applications=None),
+            welcome=dict(controllers=None),
+        )
+        load(rdict=routers)
+        # outgoing
+        self.assertEqual(filter_url('http://domain.com/welcome/default/index', out=True), '/welcome/default')
+        self.assertEqual(filter_url('http://domain.com/welcome/default/index/arg1', out=True), '/welcome/default/index/arg1')
+        self.assertEqual(filter_url('http://domain.com/welcome/default/abc', out=True), '/welcome/default/abc')
+        self.assertEqual(filter_url('http://domain.com/welcome/static/abc', out=True), '/welcome/static/abc')
+        self.assertEqual(filter_url('http://domain.com/welcome/appadmin/index', out=True), '/welcome/appadmin')
+        self.assertEqual(filter_url('http://domain.com/welcome/appadmin/abc', out=True), '/welcome/appadmin/abc')
+        self.assertEqual(filter_url('http://domain.com/welcome/admin/index', out=True), '/welcome/admin')
+        self.assertEqual(filter_url('http://domain.com/welcome/admin/abc', out=True), '/welcome/admin/abc')
+        self.assertEqual(filter_url('http://domain.com/admin/default/abc', out=True), '/admin/abc')
+        # incoming
+        self.assertEqual(filter_url('http://domain.com'), '/welcome/default/index')
+        self.assertEqual(filter_url('http://domain.com/'), '/welcome/default/index')
+        self.assertRaises(HTTP, filter_url, 'http://domain.com/appadmin')
+        try:
+            # 2.7+ only
+            self.assertRaisesRegexp(HTTP, "400.*unknown application: 'appadmin'", filter_url, 'http://domain.com/appadmin')
+        except AttributeError:
+            pass
+
+        routers = dict(
+            BASE=dict(default_application='welcome', applications=None),
+            welcome=dict(default_controller=None),
+        )
+        load(rdict=routers)
+        # outgoing
+        self.assertEqual(filter_url('http://domain.com/welcome/default/index', out=True), '/welcome/default')
+        self.assertEqual(filter_url('http://domain.com/welcome/default/index/arg1', out=True), '/welcome/default/index/arg1')
+        self.assertEqual(filter_url('http://domain.com/welcome/default/abc', out=True), '/welcome/default/abc')
+        self.assertEqual(filter_url('http://domain.com/welcome/static/abc', out=True), '/welcome/static/abc')
+        self.assertEqual(filter_url('http://domain.com/welcome/appadmin/index', out=True), '/welcome/appadmin')
+        self.assertEqual(filter_url('http://domain.com/welcome/appadmin/abc', out=True), '/welcome/appadmin/abc')
+        self.assertEqual(filter_url('http://domain.com/welcome/admin/index', out=True), '/welcome/admin')
+        self.assertEqual(filter_url('http://domain.com/welcome/admin/abc', out=True), '/welcome/admin/abc')
+        self.assertEqual(filter_url('http://domain.com/admin/default/abc', out=True), '/admin/abc')
+        # incoming
+        self.assertRaises(HTTP, filter_url, 'http://domain.com')
+        self.assertRaises(HTTP, filter_url, 'http://domain.com/appadmin')
+        try:
+            # 2.7+ only
+            self.assertRaisesRegexp(HTTP, "400.*invalid controller", filter_url, 'http://domain.com')
+            self.assertRaisesRegexp(HTTP, "400.*unknown application: 'appadmin'", filter_url, 'http://domain.com/appadmin')
+        except AttributeError:
+            pass
+
+        routers = dict(
+            BASE=dict(default_application='welcome', applications=None),
+            welcome=dict(controllers=None, default_function=None),
+        )
+        load(rdict=routers)
+        # outgoing
+        self.assertEqual(filter_url('http://domain.com/welcome/default/index', out=True), '/welcome/default/index')
+        self.assertEqual(filter_url('http://domain.com/welcome/default/index/arg1', out=True), '/welcome/default/index/arg1')
+        self.assertEqual(filter_url('http://domain.com/welcome/default/abc', out=True), '/welcome/default/abc')
+        self.assertEqual(filter_url('http://domain.com/welcome/static/abc', out=True), '/welcome/static/abc')
+        self.assertEqual(filter_url('http://domain.com/welcome/appadmin/index', out=True), '/welcome/appadmin/index')
+        self.assertEqual(filter_url('http://domain.com/welcome/appadmin/abc', out=True), '/welcome/appadmin/abc')
+        self.assertEqual(filter_url('http://domain.com/welcome/admin/index', out=True), '/welcome/admin/index')
+        self.assertEqual(filter_url('http://domain.com/welcome/admin/abc', out=True), '/welcome/admin/abc')
+        self.assertEqual(filter_url('http://domain.com/admin/default/abc', out=True), '/admin/abc')
+        # incoming
+        self.assertRaises(HTTP, filter_url, 'http://domain.com')
+        self.assertRaises(HTTP, filter_url, 'http://domain.com/appadmin')
+        try:
+            # 2.7+ only
+            self.assertRaisesRegexp(HTTP, "400.*invalid function", filter_url, 'http://domain.com')
+            self.assertRaisesRegexp(HTTP, "400.*unknown application: 'appadmin'", filter_url, 'http://domain.com/appadmin')
+        except AttributeError:
+            pass
+
+    def test_router_app(self):
+        """ Tests the doctest router app resolution"""
+        routers = dict(
+            BASE = dict(
+                domains = {
+                    "domain1.com" : "app1",
+                    "www.domain1.com" : "app1",
+                    "domain2.com" : "app2",
+                },
+            ),
+            app1 = dict(),
+            app2 = dict(),
+            goodapp = dict(),
+        )
+        routers['bad!app'] = dict()
+        load(rdict=routers)
+        self.assertEqual(filter_url('http://domain.com/welcome', app=True), 'welcome')
+        self.assertEqual(filter_url('http://domain.com/welcome/', app=True), 'welcome')
+        self.assertEqual(filter_url('http://domain.com', app=True), 'init')
+        self.assertEqual(filter_url('http://domain.com/', app=True), 'init')
+        self.assertEqual(filter_url('http://domain.com/abc', app=True), 'init')
+        self.assertEqual(filter_url('http://domain1.com/abc', app=True), 'app1')
+        self.assertEqual(filter_url('http://www.domain1.com/abc', app=True), 'app1')
+        self.assertEqual(filter_url('http://domain2.com/abc', app=True), 'app2')
+        self.assertEqual(filter_url('http://domain2.com/admin', app=True), 'admin')
+
+        self.assertEqual(filter_url('http://domain.com/goodapp', app=True), 'goodapp')
+        self.assertRaises(HTTP, filter_url, 'http://domain.com/bad!app', app=True)
+        try:
+            # 2.7+ only
+            self.assertRaisesRegexp(HTTP, '400.*invalid application', filter_url, 'http://domain.com/bad!app')
+        except AttributeError:
+            pass
+
+        routers['BASE']['domains']['domain3.com'] = 'app3'
+        self.assertRaises(SyntaxError, load, rdict=routers)
+        try:
+            # 2.7+ only
+            self.assertRaisesRegexp(SyntaxError, "unknown.*app3", load, rdict=routers)
+        except AttributeError:
+            pass
+
+    def test_router_domains(self):
+        '''
+        Test URLs that map domains
+        '''
+        routers = dict(
+            BASE = dict(
+                applications = ['app1', 'app2', 'app2A', 'app3', 'app4', 'app5', 'app6'],
+                domains = {
+                    #  two domains to the same app
+                    "domain1.com"     : "app1",
+                    "www.domain1.com" : "app1",
+                    #  same domain, two ports, to two apps
+                    "domain2.com"      : "app2a",
+                    "domain2.com:8080" : "app2b",
+                    #  two domains, same app, two controllers
+                    "domain3a.com" : "app3/c3a",
+                    "domain3b.com" : "app3/c3b",
+                    #  http vs https
+                    "domain6.com:80"  : "app6",
+                    "domain6.com:443" : "app6s",
+                },
+            ),
+            app1 =  dict( default_controller = 'c1',  default_function = 'f1',  controllers = ['c1'], exclusive_domain=True, ),
+            app2a = dict( default_controller = 'c2a', default_function = 'f2a', controllers = ['c2a'], ),
+            app2b = dict( default_controller = 'c2b', default_function = 'f2b', controllers = ['c2b'], ),
+            app3 =  dict( controllers = ['c3a', 'c3b'], ),
+            app4 =  dict( default_controller = 'c4', controllers = ['c4'], domain = 'domain4.com' ),
+            app5 =  dict( default_controller = 'c5', controllers = ['c5'], domain = 'localhost' ),
+            app6 =  dict( default_controller = 'c6',  default_function = 'f6',  controllers = ['c6'], ),
+            app6s =  dict( default_controller = 'c6s',  default_function = 'f6s',  controllers = ['c6s'], ),
+        )
+
+        load(rdict=routers)
+        self.assertEqual(filter_url('http://domain1.com/abc'), '/app1/c1/abc')
+        self.assertEqual(filter_url('http://domain1.com/c1/abc'), '/app1/c1/abc')
+        self.assertEqual(filter_url('http://domain1.com/abc.html'), '/app1/c1/abc')
+        self.assertEqual(filter_url('http://domain1.com/abc.css'), '/app1/c1/abc.css')
+        self.assertEqual(filter_url('http://domain1.com/index/abc'), "/app1/c1/index ['abc']")
+        
+        self.assertEqual(filter_url('https://domain1.com/app1/ctr/fcn', domain=('app1',None), out=True), "/ctr/fcn")
+        self.assertEqual(filter_url('https://www.domain1.com/app1/ctr/fcn', domain=('app1',None), out=True), "/ctr/fcn")
+
+        self.assertEqual(filter_url('http://domain2.com/abc'), '/app2a/c2a/abc')
+        self.assertEqual(filter_url('http://domain2.com:8080/abc'), '/app2b/c2b/abc')
+
+        self.assertEqual(filter_url('http://domain2.com/app2a/ctr/fcn', domain=('app2a',None), out=True), "/ctr/fcn")
+        self.assertEqual(filter_url('http://domain2.com/app2a/ctr/f2a', domain=('app2a',None), out=True), "/ctr")
+        self.assertEqual(filter_url('http://domain2.com/app2a/c2a/f2a', domain=('app2a',None), out=True), "/")
+        self.assertEqual(filter_url('http://domain2.com/app2a/c2a/fcn', domain=('app2a',None), out=True), "/fcn")
+        self.assertEqual(filter_url('http://domain2.com/app2a/ctr/fcn', domain=('app2b',None), out=True), "/app2a/ctr/fcn")
+        self.assertEqual(filter_url('http://domain2.com/app2a/ctr/f2a', domain=('app2b',None), out=True), "/app2a/ctr")
+        self.assertEqual(filter_url('http://domain2.com/app2a/c2a/f2a', domain=('app2b',None), out=True), "/app2a")
+
+        self.assertEqual(filter_url('http://domain3a.com/'), '/app3/c3a/index')
+        self.assertEqual(filter_url('http://domain3a.com/abc'), '/app3/c3a/abc')
+        self.assertEqual(filter_url('http://domain3a.com/c3b'), '/app3/c3b/index')
+        self.assertEqual(filter_url('http://domain3b.com/abc'), '/app3/c3b/abc')
+
+        self.assertEqual(filter_url('http://domain3a.com/app3/c3a/fcn', domain=('app3','c3a'), out=True), "/fcn")
+        self.assertEqual(filter_url('http://domain3a.com/app3/c3a/fcn', domain=('app3','c3b'), out=True), "/c3a/fcn")
+        self.assertEqual(filter_url('http://domain3a.com/app3/c3a/fcn', domain=('app1',None), out=True), "/app3/c3a/fcn")
+
+        self.assertEqual(filter_url('http://domain4.com/abc'), '/app4/c4/abc')
+        self.assertEqual(filter_url('https://domain4.com/app4/c4/fcn', domain=('app4',None), out=True), "/fcn")
+
+        self.assertEqual(filter_url('http://localhost/abc'), '/app5/c5/abc')
+        self.assertEqual(filter_url('http:///abc'), '/app5/c5/abc') # test null host => localhost
+        self.assertEqual(filter_url('https://localhost/app5/c5/fcn', domain=('app5',None), out=True), "/fcn")
+
+        self.assertEqual(filter_url('http://domain6.com'), '/app6/c6/f6')
+        self.assertEqual(filter_url('https://domain6.com'), '/app6s/c6s/f6s')
+
+        self.assertEqual(filter_url('http://domain2.com/app3/c3a/f3', domain=('app2b',None), out=True), "/app3/c3a/f3")
+        self.assertRaises(SyntaxError, filter_url, 'http://domain1.com/app1/c1/f1', domain=('app2b',None), out=True)
+        try:
+            # 2.7+ only
+            self.assertRaisesRegexp(SyntaxError, 'cross-domain conflict', filter_url, 'http://domain1.com/app1/c1/f1', domain=('app2b',None), out=True)
+        except AttributeError:
+            pass
+        self.assertEqual(filter_url('http://domain1.com/app1/c1/f1', domain=('app2b',None), host='domain2.com', out=True), "/app1")
+
+    def test_router_raise(self):
+        '''
+        Test URLs that raise exceptions
+        '''
+        # test non-exception variants
+        router_raise = dict(
+            init = dict(
+                controllers = [],
+            ),
+            welcome = dict(
+                map_hyphen = False,
+            ),
+        )
+        load(rdict=router_raise)
+        self.assertEqual(filter_url('http://domain.com/ctl'),  "/init/ctl/index")
+        self.assertEqual(filter_url('http://domain.com/default/fcn'),  "/init/default/fcn")
+        self.assertEqual(filter_url('http://domain.com/default/fcn.ext'),  "/init/default/fcn.ext")
+        self.assertEqual(filter_url('http://domain.com/default/fcn/arg'),  "/init/default/fcn ['arg']")
+        # now raise-HTTP variants
+        self.assertRaises(HTTP, filter_url, 'http://domain.com/bad!ctl')
+        self.assertRaises(HTTP, filter_url, 'http://domain.com/ctl/bad!fcn')
+        self.assertRaises(HTTP, filter_url, 'http://domain.com/ctl/fcn.bad!ext')
+        self.assertRaises(HTTP, filter_url, 'http://domain.com/ctl/fcn/bad!arg')
+        try:
+            # 2.7+ only
+            self.assertRaisesRegexp(HTTP, '400.*invalid controller', filter_url, 'http://domain.com/init/bad!ctl')
+            self.assertRaisesRegexp(HTTP, '400.*invalid function', filter_url, 'http://domain.com/init/ctlr/bad!fcn')
+            self.assertRaisesRegexp(HTTP, '400.*invalid extension', filter_url, 'http://domain.com/init/ctlr/fcn.bad!ext')
+            self.assertRaisesRegexp(HTTP, '400.*invalid arg', filter_url, 'http://domain.com/appc/init/fcn/bad!arg')
+        except AttributeError:
+            pass
+
+        self.assertEqual(filter_url('http://domain.com/welcome/default/fcn_1'),  "/welcome/default/fcn_1")
+        self.assertRaises(HTTP, filter_url, 'http://domain.com/welcome/default/fcn-1')
+        try:
+            # 2.7+ only
+            self.assertRaisesRegexp(HTTP, '400.*invalid function', filter_url, 'http://domain.com/welcome/default/fcn-1')
+        except AttributeError:
+            pass
+
+    def test_router_out(self):
+        '''
+        Test basic outgoing routing
+        '''
+        router_out = dict(
+            BASE = dict(),
+            init = dict( controllers = ['default', 'ctr'], ),
+            app = dict(),
+        )
+        load(rdict=router_out)
+        self.assertEqual(filter_url('https://domain.com/app/ctr/fcn', out=True), "/app/ctr/fcn")
+        self.assertEqual(filter_url('https://domain.com/init/ctr/fcn', out=True), "/ctr/fcn")
+        self.assertEqual(filter_url('https://domain.com/init/ctr/fcn', out=True), "/ctr/fcn")
+        self.assertEqual(filter_url('https://domain.com/init/static/file', out=True), "/init/static/file")
+        self.assertEqual(filter_url('https://domain.com/init/static/index', out=True), "/init/static/index")
+        self.assertEqual(filter_url('https://domain.com/init/default/index', out=True), "/")
+        self.assertEqual(filter_url('https://domain.com/init/ctr/index', out=True), "/ctr")
+        self.assertEqual(filter_url('http://domain.com/init/default/fcn?query', out=True), "/fcn?query")
+        self.assertEqual(filter_url('http://domain.com/init/default/fcn#anchor', out=True), "/fcn#anchor")
+        self.assertEqual(filter_url('http://domain.com/init/default/fcn?query#anchor', out=True), 
+            "/fcn?query#anchor")
+
+        router_out['BASE']['map_static'] = True
+        load(rdict=router_out)
+        self.assertEqual(filter_url('https://domain.com/init/static/file', out=True), "/static/file")
+        self.assertEqual(filter_url('https://domain.com/init/static/index', out=True), "/static/index")
+
+        router_out['init']['map_static'] = False
+        load(rdict=router_out)
+        self.assertEqual(filter_url('https://domain.com/init/static/file', out=True), "/init/static/file")
+        self.assertEqual(filter_url('https://domain.com/init/static/index', out=True), "/init/static/index")
+
+    def test_router_functions(self):
+        '''
+        Test function-omission with functions=[something]
+        '''
+        router_functions = dict(
+            BASE = dict(
+                applications = ['init', 'app', 'app2'],
+                default_application = 'app',
+            ),
+            init = dict(
+                controllers = ['default'],
+            ),
+            app = dict(
+                controllers = ['default', 'ctr'],
+                functions = ['index', 'user', 'help'],
+            ),
+            app2 = dict(
+                controllers = ['default', 'ctr'],
+                functions = ['index', 'user', 'help'],
+            ),
+        )
+        load(rdict=router_functions)
+        self.assertEqual(str(URL(a='init', c='default', f='f', args=['arg1'])), "/init/f/arg1")
+        self.assertEqual(str(URL(a='init', c='default', f='index', args=['arg1'])), "/init/index/arg1")
+        self.assertEqual(str(URL(a='app', c='default', f='index', args=['arg1'])), "/arg1")
+        self.assertEqual(str(URL(a='app', c='default', f='user', args=['arg1'])), "/user/arg1")
+        self.assertEqual(str(URL(a='app', c='default', f='user', args=['index'])), "/user/index")
+        self.assertEqual(str(URL(a='app', c='default', f='index', args=['index'])), "/index/index")
+        self.assertEqual(str(URL(a='app', c='default', f='index', args=['init'])), "/index/init")
+        self.assertEqual(str(URL(a='app', c='default', f='index', args=['ctr'])), "/index/ctr")
+        self.assertEqual(str(URL(a='app', c='ctr', f='index', args=['arg'])), "/ctr/index/arg")
+
+        self.assertEqual(str(URL(a='app2', c='default', f='index', args=['arg1'])), "/app2/arg1")
+        self.assertEqual(str(URL(a='app2', c='default', f='user', args=['arg1'])), "/app2/user/arg1")
+        self.assertEqual(str(URL(a='app2', c='default', f='user', args=['index'])), "/app2/user/index")
+        self.assertEqual(str(URL(a='app2', c='default', f='index', args=['index'])), "/app2/index/index")
+        self.assertEqual(str(URL(a='app2', c='default', f='index', args=['init'])), "/app2/index/init")
+        self.assertEqual(str(URL(a='app2', c='default', f='index', args=['ctr'])), "/app2/index/ctr")
+
+        self.assertEqual(filter_url('http://d.com/arg'), "/app/default/index ['arg']")
+        self.assertEqual(filter_url('http://d.com/user'), "/app/default/user")
+        self.assertEqual(filter_url('http://d.com/user/arg'), "/app/default/user ['arg']")
+        self.assertEqual(filter_url('http://d.com/ctr'), "/app/ctr/index")
+        self.assertEqual(filter_url('http://d.com/ctr/index/arg'), "/app/ctr/index ['arg']")
+        self.assertEqual(filter_url('http://d.com/ctr/arg'), "/app/ctr/arg")
+
+        self.assertEqual(filter_url('http://d.com/app2/arg'), "/app2/default/index ['arg']")
+        self.assertEqual(filter_url('http://d.com/app2/user'), "/app2/default/user")
+        self.assertEqual(filter_url('http://d.com/app2/user/arg'), "/app2/default/user ['arg']")
+        self.assertEqual(filter_url('http://d.com/app2/ctr'), "/app2/ctr/index")
+        self.assertEqual(filter_url('http://d.com/app2/ctr/index/arg'), "/app2/ctr/index ['arg']")
+        self.assertEqual(filter_url('http://d.com/app2/ctr/arg'), "/app2/ctr/arg")
+
+    def test_router_hyphen(self):
+        '''
+        Test hyphen conversion
+        '''
+        router_hyphen = dict(
+            BASE = dict(
+                applications = ['init', 'app1', 'app2'],
+            ),
+            init = dict(
+                controllers = ['default'],
+            ),
+            app1 = dict(
+                controllers = ['default'],
+                map_hyphen = True,
+            ),
+            app2 = dict(
+                controllers = ['default'],
+                map_hyphen = False,
+            ),
+        )
+        load(rdict=router_hyphen)
+        self.assertEqual(filter_url('http://domain.com/init/default/fcn_1', out=True), "/fcn_1")
+        self.assertEqual(filter_url('http://domain.com/static/filename-with_underscore'), 
+            "%s/applications/init/static/filename-with_underscore" % root)
+        self.assertEqual(filter_url('http://domain.com/init/static/filename-with_underscore', out=True), 
+            "/init/static/filename-with_underscore")
+
+        self.assertEqual(filter_url('http://domain.com/app2/fcn_1'), 
+            "/app2/default/fcn_1")
+        self.assertEqual(filter_url('http://domain.com/app2/ctr/fcn_1', domain=('app2',None), out=True), 
+            "/ctr/fcn_1")
+        self.assertEqual(filter_url('http://domain.com/app2/static/filename-with_underscore', domain=('app2',None), out=True), 
+            "/app2/static/filename-with_underscore")
+        self.assertEqual(filter_url('http://domain.com/app2/static/filename-with_underscore'), 
+            "%s/applications/app2/static/filename-with_underscore" % root)
+
+        self.assertEqual(str(URL(a='init', c='default', f='a_b')), "/a_b")
+        self.assertEqual(str(URL(a='app1', c='default', f='a_b')), "/app1/a-b")
+        self.assertEqual(str(URL(a='app2', c='default', f='a_b')), "/app2/a_b")
+        self.assertEqual(str(URL(a='app1', c='static', f='a/b_c')), "/app1/static/a/b_c")
+        self.assertEqual(str(URL(a='app1', c='static/a', f='b_c')), "/app1/static/a/b_c")
+        self.assertEqual(str(URL(a='app2', c='static', f='a/b_c')), "/app2/static/a/b_c")
+        self.assertEqual(str(URL(a='app2', c='static/a', f='b_c')), "/app2/static/a/b_c")
+
+
+    def test_router_lang(self):
+        '''
+        Test language specifications
+        '''
+        router_lang = dict(
+            BASE = dict(default_application = 'admin'),
+            welcome = dict(),
+            admin = dict(
+                controllers = ['default', 'ctr'],
+                languages = ['en', 'it', 'it-it'], default_language = 'en',
+            ),
+            examples = dict(
+                languages = ['en', 'it', 'it-it'], default_language = 'en',
+            ),
+        )
+        load(rdict=router_lang)
+        self.assertEqual(filter_url('http://domain.com/index/abc'), "/admin/default/index ['abc'] (en)")
+        self.assertEqual(filter_url('http://domain.com/en/abc/def'), "/admin/default/abc ['def'] (en)")
+        self.assertEqual(filter_url('http://domain.com/it/abc/def'), "/admin/default/abc ['def'] (it)")
+        self.assertEqual(filter_url('http://domain.com/it-it/abc/def'), "/admin/default/abc ['def'] (it-it)")
+        self.assertEqual(filter_url('http://domain.com/index/a%20bc'), "/admin/default/index ['a bc'] (en)")
+        self.assertEqual(filter_url('http://domain.com/static/file'), "%s/applications/admin/static/file" % root)
+        self.assertEqual(filter_url('http://domain.com/en/static/file'), "%s/applications/admin/static/file" % root)
+        self.assertEqual(filter_url('http://domain.com/examples/en/static/file'), "%s/applications/examples/static/en/file" % root)
+        self.assertEqual(filter_url('http://domain.com/examples/static/file'), "%s/applications/examples/static/en/file" % root)
+        self.assertEqual(filter_url('http://domain.com/examples/it/static/file'), "%s/applications/examples/static/it/file" % root)
+        self.assertEqual(filter_url('http://domain.com/examples/it-it/static/file'), "%s/applications/examples/static/file" % root)
+
+        self.assertEqual(filter_url('https://domain.com/admin/ctr/fcn', lang='en', out=True), "/ctr/fcn")
+        self.assertEqual(filter_url('https://domain.com/admin/ctr/fcn', lang='it', out=True), "/it/ctr/fcn")
+        self.assertEqual(filter_url('https://domain.com/admin/ctr/fcn', lang='it-it', out=True), "/it-it/ctr/fcn")
+        self.assertEqual(filter_url('https://domain.com/admin/static/file', lang='en', out=True), "/admin/en/static/file")
+        self.assertEqual(filter_url('https://domain.com/admin/static/file', lang='it', out=True), "/admin/it/static/file")
+        self.assertEqual(filter_url('https://domain.com/admin/static/file', lang='it-it', out=True), "/admin/it-it/static/file")
+        self.assertEqual(filter_url('https://domain.com/welcome/ctr/fcn', lang='it', out=True), "/welcome/ctr/fcn")
+        self.assertEqual(filter_url('https://domain.com/welcome/ctr/fcn', lang='es', out=True), "/welcome/ctr/fcn")        
+
+        router_lang['admin']['map_static'] = True
+        load(rdict=router_lang)
+        self.assertEqual(filter_url('https://domain.com/admin/ctr/fcn', lang='en', out=True), "/ctr/fcn")
+        self.assertEqual(filter_url('https://domain.com/admin/ctr/fcn', lang='it', out=True), "/it/ctr/fcn")
+        self.assertEqual(filter_url('https://domain.com/admin/ctr/fcn', lang='it-it', out=True), "/it-it/ctr/fcn")
+        self.assertEqual(filter_url('https://domain.com/admin/static/file', lang='en', out=True), "/static/file")
+        self.assertEqual(filter_url('https://domain.com/admin/static/file', lang='it', out=True), "/it/static/file")
+        self.assertEqual(filter_url('https://domain.com/admin/static/file', lang='it-it', out=True), "/it-it/static/file")
+        self.assertEqual(filter_url('https://domain.com/welcome/ctr/fcn', lang='it', out=True), "/welcome/ctr/fcn")
+        self.assertEqual(filter_url('https://domain.com/welcome/ctr/fcn', lang='es', out=True), "/welcome/ctr/fcn")        
+
+    def test_router_get_effective(self):
+        '''
+        Test get_effective_router
+        '''
+        router_get_effective = dict(
+            BASE = dict(
+                default_application = 'a1',
+                applications = ['a1', 'a2'],
+            ),
+            a1 = dict(
+                controllers = ['c1a', 'c1b', 'default'],
+            ),
+            a2 = dict(
+                default_controller = 'c2',
+                controllers = [],
+            ),
+            a3 = dict(
+                default_controller = 'c2',
+                controllers = ['c1'],
+            ),
+            a4 = dict(
+                default_function = 'f1',
+                functions = ['f2'],
+            ),
+        )
+        load(rdict=router_get_effective)
+        self.assertEqual(get_effective_router('BASE').applications, set(['a1','a2']))
+        self.assertEqual(get_effective_router('BASE').default_application, 'a1')
+        self.assertEqual(get_effective_router('BASE').domains, {})
+        self.assertEqual(get_effective_router('a1').applications, None)
+        self.assertEqual(get_effective_router('a1').default_application, None)
+        self.assertEqual(get_effective_router('a1').domains, None)
+        self.assertEqual(get_effective_router('a1').default_controller, "default")
+        self.assertEqual(get_effective_router('a2').default_application, None)
+        self.assertEqual(get_effective_router('a2').default_controller, "c2")
+        self.assertEqual(get_effective_router('a1').controllers, set(['c1a', 'c1b', 'default', 'static']))
+        self.assertEqual(get_effective_router('a2').controllers, set())
+        self.assertEqual(get_effective_router('a3').controllers, set(['c1', 'c2', 'static']))
+        self.assertEqual(get_effective_router('a4').functions, set(['f1', 'f2']))
+        self.assertEqual(get_effective_router('xx'), None)
+
+    def test_router_error(self):
+        '''
+        Test rewrite of HTTP errors
+        '''
+        router_err = dict()
+        load(rdict=router_err)
+        self.assertEqual(filter_err(200), 200)
+        self.assertEqual(filter_err(399), 399)
+        self.assertEqual(filter_err(400), 400)
+
+    def test_router_args(self):
+        '''
+        Test URL args parsing/generation
+        '''
+        load(rdict=dict())
+        self.assertEqual(filter_url('http://domain.com/init/default/f/arg1'), 
+            "/init/default/f ['arg1']")
+        self.assertEqual(filter_url('http://domain.com/init/default/f/arg1/'), 
+            "/init/default/f ['arg1']")
+        self.assertEqual(filter_url('http://domain.com/init/default/f/arg1//'), 
+            "/init/default/f ['arg1', '']")
+        self.assertEqual(filter_url('http://domain.com/init/default/f//arg1'), 
+            "/init/default/f ['', 'arg1']")
+        self.assertEqual(filter_url('http://domain.com/init/default/f/arg1/arg2'), 
+            "/init/default/f ['arg1', 'arg2']")
+
+        self.assertEqual(filter_url('http://domain.com/init/default/f', out=True), "/f")
+        self.assertEqual(map_url_out(None, None, 'init', 'default', 'f', None, None, None, None, None), "/f")
+        self.assertEqual(map_url_out(None, None, 'init', 'default', 'f', [], None, None, None, None), "/f")
+        self.assertEqual(map_url_out(None, None, 'init', 'default', 'f', ['arg1'], None, None, None, None), "/f")
+        self.assertEqual(map_url_out(None, None, 'init', 'default', 'f', ['arg1', ''], None, None, None, None), "/f")
+        self.assertEqual(str(URL(a='init', c='default', f='f', args=None)), "/f")
+        self.assertEqual(str(URL(a='init', c='default', f='f', args=['arg1'])), "/f/arg1")
+        self.assertEqual(str(URL(a='init', c='default', f='f', args=['arg1', ''])), "/f/arg1//")
+        self.assertEqual(str(URL(a='init', c='default', f='f', args=['arg1', '', 'arg3'])), "/f/arg1//arg3")
+        self.assertEqual(str(URL(a='init', c='default', f='f', args=['ar g'])), "/f/ar%20g")
+        self.assertEqual(str(URL(a='init', c='default', f='f', args=['årg'])), "/f/%C3%A5rg")
+        self.assertEqual(str(URL(a='init', c='default', f='fünc')), "/f\xc3\xbcnc")
+
+    def test_routes_anchor(self):
+        '''
+        Test URL with anchor
+        '''
+        self.assertEqual(str(URL(a='a', c='c', f='f', anchor='anchor')), "/a/c/f#anchor")
+        load(rdict=dict())
+        self.assertEqual(str(URL(a='a', c='c', f='f', anchor='anchor')), "/a/c/f#anchor")
+        args = ['a1', 'a2']
+        self.assertEqual(str(URL(a='a', c='c', f='f', args=args, anchor='anchor')), 
+            "/a/c/f/a1/a2#anchor")
+        vars = dict(v1=1, v2=2)
+        self.assertEqual(str(URL(a='a', c='c', f='f', vars=vars, anchor='anchor')), 
+            "/a/c/f?v1=1&v2=2#anchor")
+        self.assertEqual(str(URL(a='a', c='c', f='f', args=args, vars=vars, anchor='anchor')), 
+            "/a/c/f/a1/a2?v1=1&v2=2#anchor")
+        self.assertEqual(str(URL(a='init', c='default', f='index')),
+            "/")
+        self.assertEqual(str(URL(a='init', c='default', f='f')),
+            "/f")
+        self.assertEqual(str(URL(a='init', c='default', f='index', anchor='anchor')),
+            "/#anchor")
+        self.assertEqual(str(URL(a='init', c='default', f='f', anchor='anchor')),
+            "/f#anchor")
+
+    def test_router_prefix(self):
+        '''
+        Test path_prefix
+        '''
+        router_path_prefix = dict(
+            BASE = dict(
+                default_application = 'a1',
+                applications = ['a1', 'a2'],
+                path_prefix = '/path/to/apps',
+            ),
+            a1 = dict(
+                controllers = ['c1a', 'c1b', 'default'],
+            ),
+            a2 = dict(
+                default_controller = 'c2',
+                controllers = [],
+            ),
+        )
+        load(rdict=router_path_prefix)
+        self.assertEqual(str(URL(a='a1', c='c1a', f='f')), 
+            "/path/to/apps/c1a/f")
+        self.assertEqual(str(URL(a='a2', c='c', f='f')), 
+            "/path/to/apps/a2/c/f")
+        self.assertEqual(str(URL(a='a2', c='c2', f='f')), 
+            "/path/to/apps/a2/c2/f")
+        self.assertEqual(filter_url('http://domain.com/a1/'), "/a1/default/index")
+        self.assertEqual(filter_url('http://domain.com/path/to/apps/a1/'), "/a1/default/index")
+        self.assertEqual(filter_url('http://domain.com/path/to/a1/'), "/a1/default/path ['to', 'a1']")
+
+    def test_router_absolute(self):
+        '''
+        Test absolute URL
+        '''
+        load(rdict=dict())
+        r = Storage()
+        r.env = Storage()
+        r.env.http_host = 'domain.com'
+        r.env.WSGI_URL_SCHEME = 'httpx' # distinguish incoming scheme
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f')), "/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', host=True)), 
+            "httpx://domain.com/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', host='host.com')), 
+            "httpx://host.com/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', scheme=True)), 
+            "httpx://domain.com/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', scheme=False)), 
+            "/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', scheme='https')), 
+            "https://domain.com/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', scheme='wss')), 
+            "wss://domain.com/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', scheme=True, host=True)), 
+            "httpx://domain.com/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', scheme='https', host=True)), 
+            "https://domain.com/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', scheme=False, host=True)), 
+            "httpx://domain.com/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', scheme=True, host='host.com')), 
+            "httpx://host.com/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', scheme=False, host='host.com')), 
+            "httpx://host.com/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', port=1234)), 
+            "httpx://domain.com:1234/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', scheme=True, port=1234)), 
+            "httpx://domain.com:1234/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', host='host.com', port=1234)), 
+            "httpx://host.com:1234/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', scheme='wss', host='host.com', port=1234)), 
+            "wss://host.com:1234/a/c/f")
+
+    def test_request_uri(self):
+        '''
+        Test REQUEST_URI in env
+        '''
+        load(rdict=dict())
+        self.assertEqual(filter_url('http://domain.com/abc', env=True).request_uri, 
+            '/init/default/abc')
+        self.assertEqual(filter_url('http://domain.com/abc?def', env=True).request_uri, 
+            '/init/default/abc?def')
+        self.assertEqual(filter_url('http://domain.com/index/abc', env=True).request_uri, 
+            "/init/default/index/abc")
+        self.assertEqual(filter_url('http://domain.com/abc/def', env=True).request_uri, 
+            "/init/default/abc/def")
+        self.assertEqual(filter_url('http://domain.com/index/a%20bc', env=True).request_uri, 
+            "/init/default/index/a%20bc")
+
+if __name__ == '__main__':
+    setUpModule()       # pre-2.7
+    unittest.main()
+    tearDownModule()

ADDED   gluon/tests/test_routes.py
Index: gluon/tests/test_routes.py
==================================================================
--- /dev/null
+++ gluon/tests/test_routes.py
@@ -0,0 +1,363 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""Unit tests for rewrite.py regex routing option"""
+
+import sys
+import os
+import unittest
+import tempfile
+import logging
+
+if os.path.isdir('gluon'):
+    sys.path.append(os.path.realpath('gluon')) # running from web2py base
+else:
+    sys.path.append(os.path.realpath('../')) # running from gluon/tests/
+
+from rewrite import load, filter_url, filter_err, get_effective_router, regex_filter_out, regex_select
+from html import URL
+from fileutils import abspath
+from settings import global_settings
+from http import HTTP
+from storage import Storage
+
+logger = None
+oldcwd = None
+root = None
+
+def setUpModule():
+    def make_apptree():
+        "build a temporary applications tree"
+        #  applications/
+        os.mkdir(abspath('applications'))
+        #  applications/app/
+        for app in ('admin', 'examples', 'welcome'):
+            os.mkdir(abspath('applications', app))
+            #  applications/app/(controllers, static)
+            for subdir in ('controllers', 'static'):
+                os.mkdir(abspath('applications', app, subdir))
+        #  applications/admin/controllers/*.py
+        for ctr in ('appadmin', 'default', 'gae', 'mercurial', 'shell', 'wizard'):
+            open(abspath('applications', 'admin', 'controllers', '%s.py' % ctr), 'w').close()
+        #  applications/examples/controllers/*.py
+        for ctr in ('ajax_examples', 'appadmin', 'default', 'global', 'spreadsheet'):
+            open(abspath('applications', 'examples', 'controllers', '%s.py' % ctr), 'w').close()
+        #  applications/welcome/controllers/*.py
+        for ctr in ('appadmin', 'default'):
+            open(abspath('applications', 'welcome', 'controllers', '%s.py' % ctr), 'w').close()
+        #  create an app-specific routes.py for examples app
+        routes = open(abspath('applications', 'examples', 'routes.py'), 'w')
+        routes.write("default_function='exdef'\n")
+        routes.close()
+
+    global oldcwd
+    if oldcwd is None:  # do this only once
+        oldcwd = os.getcwd()
+        if not os.path.isdir('gluon'):
+            os.chdir(os.path.realpath('../../'))    # run from web2py base directory
+        import main   # for initialization after chdir
+        global logger
+        logger = logging.getLogger('web2py.rewrite')
+        global_settings.applications_parent = tempfile.mkdtemp()
+        global root
+        root = global_settings.applications_parent
+        make_apptree()
+
+def tearDownModule():
+    global oldcwd
+    if oldcwd is not None:
+        os.chdir(oldcwd)
+        oldcwd = None
+
+
+class TestRoutes(unittest.TestCase):
+    """ Tests the regex routing logic from gluon.rewrite """
+
+    def test_routes_null(self):
+        """ Tests a null routes table """
+        load(data='')
+        # incoming
+        self.assertEqual(filter_url('http://domain.com'), '/init/default/index')
+        self.assertEqual(filter_url('http://domain.com/'), '/init/default/index')
+        self.assertEqual(filter_url('http://domain.com/abc'), '/abc/default/index')
+        self.assertEqual(filter_url('http://domain.com/abc/'), '/abc/default/index')
+        self.assertEqual(filter_url('http://domain.com/abc/def'), "/abc/def/index")
+        self.assertEqual(filter_url('http://domain.com/abc/def/'), "/abc/def/index")
+        self.assertEqual(filter_url('http://domain.com/abc/def/ghi'), "/abc/def/ghi")
+        self.assertEqual(filter_url('http://domain.com/abc/def/ghi/'), "/abc/def/ghi")
+        self.assertEqual(filter_url('http://domain.com/abc/def/ghi/jkl'), "/abc/def/ghi ['jkl']")
+        self.assertEqual(filter_url('http://domain.com/abc/def/ghi/j%20kl'), "/abc/def/ghi ['j_kl']")
+        self.assertEqual(filter_url('http://domain.com/welcome/static/path/to/static'), "%s/applications/welcome/static/path/to/static" % root)
+        self.assertRaises(HTTP, filter_url, 'http://domain.com/welcome/static/bad/path/to/st~tic')
+        try:
+            # 2.7+ only
+            self.assertRaisesRegexp(HTTP, "400.*BAD REQUEST \[invalid path\]", filter_url, 'http://domain.com/welcome/static/bad/path/to/st~tic')
+        except AttributeError:
+            pass
+        # outgoing
+        self.assertEqual(filter_url('http://domain.com/init/default/index', out=True), '/init/default/index')
+        self.assertEqual(filter_url('http://domain.com/init/default/index/arg1', out=True), '/init/default/index/arg1')
+        self.assertEqual(filter_url('http://domain.com/init/default/abc', out=True), '/init/default/abc')
+
+    def test_routes_query(self):
+        """ Test query appending """
+        data = r'''
+routes_in = (
+ ('/service/$model/create', '/app/default/call/json/create?model=$model'),
+)
+'''
+        load(data=data)
+        self.assertEqual(filter_url('http://localhost:8000/service/person/create'), "/app/default/call ['json', 'create'] ?model=person")
+        self.assertEqual(filter_url('http://localhost:8000/service/person/create?var1=val1'), "/app/default/call ['json', 'create'] ?model=person&var1=val1")
+
+    def test_routes_specific(self):
+        """ 
+        Test app-specific routes.py 
+        
+        Note that make_apptree above created applications/examples/routes.py with a default_function.
+        """
+        data = r'''
+routes_app = [
+    (r'/(?Pwelcome|admin|examples)\b.*', r'\g'),
+    (r'$anything', r'welcome'),
+    (r'/?$anything', r'welcome'),
+]
+'''
+        load(data=data)
+        self.assertEqual(filter_url('http://domain.com/welcome'), '/welcome/default/index')
+        self.assertEqual(filter_url('http://domain.com/examples'), '/examples/default/exdef')
+
+    def test_routes_defapp(self):
+        """ Test the default-application function """
+        data = r'''
+default_application = 'defapp'
+'''
+        load(data=data)
+        # incoming
+        self.assertEqual(filter_url('http://domain.com'), '/defapp/default/index')
+        self.assertEqual(filter_url('http://domain.com/'), '/defapp/default/index')
+        self.assertEqual(filter_url('http://domain.com/welcome'), '/welcome/default/index')
+        self.assertEqual(filter_url('http://domain.com/app'), '/app/default/index')
+        self.assertEqual(filter_url('http://domain.com/welcome/default/index/abc'), "/welcome/default/index ['abc']")
+        self.assertEqual(filter_url('http://domain.com/welcome/static/abc'), '%s/applications/welcome/static/abc' % root)
+        self.assertEqual(filter_url('http://domain.com/defapp/static/path/to/static'), "%s/applications/defapp/static/path/to/static" % root)
+
+    def test_routes_raise(self):
+        '''
+        Test URLs that raise exceptions
+        '''
+        # test non-exception variants
+        load(data='')
+        self.assertEqual(filter_url('http://domain.com/init'),  "/init/default/index")
+        self.assertEqual(filter_url('http://domain.com/init/default'),  "/init/default/index")
+        self.assertEqual(filter_url('http://domain.com/init/default/fcn.ext'),  "/init/default/fcn.ext")
+        self.assertEqual(filter_url('http://domain.com/init/default/fcn/arg'),  "/init/default/fcn ['arg']")
+        # now raise-HTTP variants
+        self.assertRaises(HTTP, filter_url, 'http://domain.com/bad!ctl')
+        self.assertRaises(HTTP, filter_url, 'http://domain.com/ctl/bad!fcn')
+        self.assertRaises(HTTP, filter_url, 'http://domain.com/ctl/fcn.bad!ext')
+        self.assertRaises(HTTP, filter_url, 'http://domain.com/ctl/fcn/bad!arg')
+        try:
+            # 2.7+ only
+            self.assertRaisesRegexp(HTTP, '400 BAD REQUEST \[invalid path\]', filter_url, 'http://domain.com/init/bad!ctl')
+            self.assertRaisesRegexp(HTTP, '400 BAD REQUEST \[invalid path\]', filter_url, 'http://domain.com/init/ctlr/bad!fcn')
+            self.assertRaisesRegexp(HTTP, '400 BAD REQUEST \[invalid path\]', filter_url, 'http://domain.com/init/ctlr/fcn.bad!ext')
+            self.assertRaisesRegexp(HTTP, '400 BAD REQUEST \[invalid path \(args\)\]', filter_url, 'http://domain.com/appc/init/fcn/bad!arg')
+        except AttributeError:
+            pass
+
+        self.assertEqual(filter_url('http://domain.com/welcome/default/fcn_1'),  "/welcome/default/fcn_1")
+        self.assertRaises(HTTP, filter_url, 'http://domain.com/welcome/default/fcn-1')
+        try:
+            # 2.7+ only
+            self.assertRaisesRegexp(HTTP, '400 BAD REQUEST \[invalid path\]', filter_url, 'http://domain.com/welcome/default/fcn-1')
+        except AttributeError:
+            pass
+
+    def test_routes_error(self):
+        '''
+        Test rewrite of HTTP errors
+        '''
+        router_err = dict()
+        load(rdict=router_err)
+        self.assertEqual(filter_err(200), 200)
+        self.assertEqual(filter_err(399), 399)
+        self.assertEqual(filter_err(400), 400)
+
+    def test_routes_args(self):
+        '''
+        Test URL args parsing/generation
+        '''
+        data = r'''routes_in = [
+    ('/robots.txt', '/welcome/static/robots.txt'), 
+    ('/favicon.ico', '/welcome/static/favicon.ico'), 
+    ('/admin$anything', '/admin$anything'), 
+    ('.*:https?://(.*\\.)?domain1.com:$method /', '/app1/default'), 
+    ('.*:https?://(.*\\.)?domain1.com:$method /static/$anything', '/app1/static/$anything'), 
+    ('.*:https?://(.*\\.)?domain1.com:$method /appadmin/$anything', '/app1/appadmin/$anything'), 
+    ('.*:https?://(.*\\.)?domain1.com:$method /$anything', '/app1/default/$anything'), 
+    ('.*:https?://(.*\\.)?domain2.com:$method /', '/app2/default'), 
+    ('.*:https?://(.*\\.)?domain2.com:$method /static/$anything', '/app2/static/$anything'), 
+    ('.*:https?://(.*\\.)?domain2.com:$method /appadmin/$anything', '/app2/appadmin/$anything'), 
+    ('.*:https?://(.*\\.)?domain2.com:$method /$anything', '/app2/default/$anything'), 
+    ('.*:https?://(.*\\.)?domain3.com:$method /', '/app3/defcon3'), 
+    ('.*:https?://(.*\\.)?domain3.com:$method /static/$anything', '/app3/static/$anything'), 
+    ('.*:https?://(.*\\.)?domain3.com:$method /appadmin/$anything', '/app3/appadmin/$anything'), 
+    ('.*:https?://(.*\\.)?domain3.com:$method /$anything', '/app3/defcon3/$anything'),
+    ('/', '/welcome/default'), 
+    ('/welcome/default/$anything', '/welcome/default/$anything'), 
+    ('/welcome/$anything', '/welcome/default/$anything'), 
+    ('/static/$anything', '/welcome/static/$anything'), 
+    ('/appadmin/$anything', '/welcome/appadmin/$anything'), 
+    ('/$anything', '/welcome/default/$anything'), 
+    ]
+routes_out = [
+    ('/welcome/static/$anything', '/static/$anything'), 
+    ('/welcome/appadmin/$anything', '/appadmin/$anything'), 
+    ('/welcome/default/$anything', '/$anything'), 
+    ('/app1/static/$anything', '/static/$anything'), 
+    ('/app1/appadmin/$anything', '/appadmin/$anything'), 
+    ('/app1/default/$anything', '/$anything'), 
+    ('/app2/static/$anything', '/static/$anything'), 
+    ('/app2/appadmin/$anything', '/appadmin/$anything'), 
+    ('/app2/default/$anything', '/$anything'), 
+    ('/app3/static/$anything', '/static/$anything'), 
+    ('/app3/appadmin/$anything', '/appadmin/$anything'), 
+    ('/app3/defcon3/$anything', '/$anything')
+    ]
+'''
+        load(data=data)
+        self.assertEqual(filter_url('http://domain.com/welcome/default/f/arg1'), 
+            "/welcome/default/f ['arg1']")
+        self.assertEqual(filter_url('http://domain.com/welcome/default/f/arg1/'), 
+            "/welcome/default/f ['arg1']")
+        self.assertEqual(filter_url('http://domain.com/welcome/default/f/arg1//'), 
+            "/welcome/default/f ['arg1', '']")
+        self.assertEqual(filter_url('http://domain.com/welcome/default/f//arg1'), 
+            "/welcome/default/f ['', 'arg1']")
+        self.assertEqual(filter_url('http://domain.com/welcome/default/f/arg1/arg2'), 
+            "/welcome/default/f ['arg1', 'arg2']")
+
+        self.assertEqual(filter_url('http://domain.com/welcome/default/f', out=True), "/f")
+        self.assertEqual(regex_filter_out('/welcome/default/f'), "/f")
+        self.assertEqual(str(URL(a='welcome', c='default', f='f', args=None)), "/f")
+        self.assertEqual(str(URL(a='welcome', c='default', f='f', args=['arg1'])), "/f/arg1")
+        self.assertEqual(str(URL(a='welcome', c='default', f='f', args=['arg1', ''])), "/f/arg1//")
+        self.assertEqual(str(URL(a='welcome', c='default', f='f', args=['arg1', '', 'arg3'])), "/f/arg1//arg3")
+        self.assertEqual(str(URL(a='welcome', c='default', f='f', args=['ar g'])), "/f/ar%20g")
+        self.assertEqual(str(URL(a='welcome', c='default', f='f', args=['årg'])), "/f/%C3%A5rg")
+        self.assertEqual(str(URL(a='welcome', c='default', f='fünc')), "/f\xc3\xbcnc")
+
+    def test_routes_anchor(self):
+        '''
+        Test URL with anchor
+        '''
+        self.assertEqual(str(URL(a='a', c='c', f='f', anchor='anchor')), "/a/c/f#anchor")
+        load(data='')
+        self.assertEqual(str(URL(a='a', c='c', f='f', anchor='anchor')), "/a/c/f#anchor")
+        args = ['a1', 'a2']
+        self.assertEqual(str(URL(a='a', c='c', f='f', args=args, anchor='anchor')), 
+            "/a/c/f/a1/a2#anchor")
+        vars = dict(v1=1, v2=2)
+        self.assertEqual(str(URL(a='a', c='c', f='f', vars=vars, anchor='anchor')), 
+            "/a/c/f?v1=1&v2=2#anchor")
+        self.assertEqual(str(URL(a='a', c='c', f='f', args=args, vars=vars, anchor='anchor')), 
+            "/a/c/f/a1/a2?v1=1&v2=2#anchor")
+
+        data = r'''routes_out = [
+            ('/init/default/index', '/'), 
+        ]'''
+        load(data=data)
+        self.assertEqual(str(URL(a='init', c='default', f='index')),
+            "/")
+        self.assertEqual(str(URL(a='init', c='default', f='index', anchor='anchor')),
+            "/init/default/index#anchor")
+
+        data = r'''routes_out = [
+            (r'/init/default/index(?P(#.*)?)', r'/\g'), 
+        ]'''
+        load(data=data)
+        self.assertEqual(str(URL(a='init', c='default', f='index')),
+            "/")
+        self.assertEqual(str(URL(a='init', c='default', f='index', anchor='anchor')),
+            "/#anchor")
+
+        data = r'''routes_out = [
+            (r'/init/default/index(?P([?#].*)?)', r'/\g'), 
+        ]'''
+        load(data=data)
+        self.assertEqual(str(URL(a='init', c='default', f='index')),
+            "/")
+        self.assertEqual(str(URL(a='init', c='default', f='index', anchor='anchor')),
+            "/#anchor")
+        query = dict(var='abc')
+        self.assertEqual(str(URL(a='init', c='default', f='index', vars=query)),
+            "/?var=abc")
+        self.assertEqual(str(URL(a='init', c='default', f='index', vars=query, anchor='anchor')),
+            "/?var=abc#anchor")
+
+    def test_routes_absolute(self):
+        '''
+        Test absolute URL
+        '''
+        load(data='')
+        r = Storage()
+        r.env = Storage()
+        r.env.http_host = 'domain.com'
+        r.env.WSGI_URL_SCHEME = 'httpx' # distinguish incoming scheme
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f')), "/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', host=True)), 
+            "httpx://domain.com/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', host='host.com')), 
+            "httpx://host.com/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', scheme=True)), 
+            "httpx://domain.com/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', scheme=False)), 
+            "/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', scheme='https')), 
+            "https://domain.com/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', scheme='wss')), 
+            "wss://domain.com/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', scheme=True, host=True)), 
+            "httpx://domain.com/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', scheme='https', host=True)), 
+            "https://domain.com/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', scheme=False, host=True)), 
+            "httpx://domain.com/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', scheme=True, host='host.com')), 
+            "httpx://host.com/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', scheme=False, host='host.com')), 
+            "httpx://host.com/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', port=1234)), 
+            "httpx://domain.com:1234/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', scheme=True, port=1234)), 
+            "httpx://domain.com:1234/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', host='host.com', port=1234)), 
+            "httpx://host.com:1234/a/c/f")
+        self.assertEqual(str(URL(r=r, a='a', c='c', f='f', scheme='wss', host='host.com', port=1234)), 
+            "wss://host.com:1234/a/c/f")
+
+    def test_request_uri(self):
+        '''
+        Test REQUEST_URI in env
+        '''
+        data = r'''routes_in = [
+    ('/abc', '/init/default/abc'), 
+    ('/index/$anything', '/init/default/index/$anything'), 
+    ]
+'''
+        load(data=data)
+        self.assertEqual(filter_url('http://domain.com/abc', env=True).request_uri, 
+            '/init/default/abc')
+        self.assertEqual(filter_url('http://domain.com/abc?def', env=True).request_uri, 
+            '/init/default/abc?def')
+        self.assertEqual(filter_url('http://domain.com/index/abc', env=True).request_uri, 
+            "/init/default/index/abc")
+        self.assertEqual(filter_url('http://domain.com/index/a%20bc', env=True).request_uri, 
+            "/init/default/index/a bc")
+
+
+if __name__ == '__main__':
+    setUpModule()       # pre-2.7
+    unittest.main()
+    tearDownModule()

ADDED   gluon/tests/test_template.py
Index: gluon/tests/test_template.py
==================================================================
--- /dev/null
+++ gluon/tests/test_template.py
@@ -0,0 +1,60 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+"""
+    Unit tests for gluon.template
+"""
+
+import sys
+import os
+if os.path.isdir('gluon'):
+    sys.path.append(os.path.realpath('gluon'))
+else:
+    sys.path.append(os.path.realpath('../'))
+
+import unittest
+from template import render
+
+class TestVirtualFields(unittest.TestCase):
+
+    def testRun(self):
+        self.assertEqual(render(content='{{for i in range(n):}}{{=i}}{{pass}}',
+                      context=dict(n=3)), '012')
+        self.assertEqual(render(content='{{if n>2:}}ok{{pass}}',
+                      context=dict(n=3)), 'ok')
+        self.assertEqual(render(content='{{try:}}{{n/0}}{{except:}}fail{{pass}}',
+                      context=dict(n=3)), 'fail')
+        self.assertEqual(render(content='{{="<&>"}}'), '<&>')
+        self.assertEqual(render(content='"abc"'), '"abc"')
+        self.assertEqual(render(content='"a\'bc"'), '"a\'bc"')
+        self.assertEqual(render(content='"a\"bc"'), '"a\"bc"')
+        self.assertEqual(render(content=r'''"a\"bc"'''), r'"a\"bc"')
+        self.assertEqual(render(content=r'''"""abc\""""'''), r'"""abc\""""')
+
+    def testEqualWrite(self):
+        "test generation of response.write from ="
+        self.assertEqual(render(content='{{="abc"}}'), 'abc')
+        # whitespace is stripped
+        self.assertEqual(render(content='{{ ="abc"}}'), 'abc')
+        self.assertEqual(render(content='{{ ="abc" }}'), 'abc')
+        self.assertEqual(render(content='{{pass\n="abc" }}'), 'abc')
+        # = recognized only at the beginning of a physical line
+        self.assertEqual(render(content='{{xyz = "xyz"\n="abc"\n="def"\n=xyz }}'), 'abcdefxyz')
+        # = in python blocks
+        self.assertEqual(render(content='{{if True:\n="abc"\npass }}'), 'abc')
+        self.assertEqual(render(content='{{if True:\n="abc"\npass\n="def" }}'), 'abcdef')
+        self.assertEqual(render(content='{{if False:\n="abc"\npass\n="def" }}'), 'def')
+        self.assertEqual(render(content='{{if True:\n="abc"\nelse:\n="def"\npass }}'), 'abc')
+        self.assertEqual(render(content='{{if False:\n="abc"\nelse:\n="def"\npass }}'), 'def')
+        # codeblock-leading = handles internal newlines, escaped or not
+        self.assertEqual(render(content='{{=list((1,2,3))}}'), '[1, 2, 3]')
+        self.assertEqual(render(content='{{=list((1,2,\\\n3))}}'), '[1, 2, 3]')
+        self.assertEqual(render(content='{{=list((1,2,\n3))}}'), '[1, 2, 3]')
+        # ...but that means no more = operators in the codeblock
+        self.assertRaises(SyntaxError, render, content='{{="abc"\n="def" }}')
+        # = embedded in codeblock won't handle newlines in its argument
+        self.assertEqual(render(content='{{pass\n=list((1,2,\\\n3))}}'), '[1, 2, 3]')
+        self.assertRaises(SyntaxError, render, content='{{pass\n=list((1,2,\n3))}}')
+
+
+if __name__ == '__main__':
+    unittest.main()

ADDED   gluon/tests/test_utils.py
Index: gluon/tests/test_utils.py
==================================================================
--- /dev/null
+++ gluon/tests/test_utils.py
@@ -0,0 +1,27 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+""" Unit tests for utils.py """
+
+import sys
+import os
+import unittest
+if os.path.isdir('gluon'):
+    sys.path.append(os.path.realpath('gluon'))
+else:
+    sys.path.append(os.path.realpath('../'))
+
+from utils import md5_hash
+
+
+class TestUtils(unittest.TestCase):
+    """ Tests the utils.py module """
+
+    def test_md5_hash(self):
+        """ Tests the md5_hash function """
+
+        data = md5_hash("web2py rocks")
+        self.assertEqual(data, '79509f3246a2824dee64635303e99204')
+
+if __name__ == '__main__':
+    unittest.main()

ADDED   gluon/tools.py
Index: gluon/tools.py
==================================================================
--- /dev/null
+++ gluon/tools.py
@@ -0,0 +1,4115 @@
+#!/bin/python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro 
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+"""
+
+import base64
+import cPickle
+import datetime
+import thread
+import logging
+import sys
+import os
+import re
+import time
+import copy
+import smtplib
+import urllib
+import urllib2
+import Cookie
+import cStringIO
+from email import MIMEBase, MIMEMultipart, MIMEText, Encoders, Header, message_from_string
+
+from contenttype import contenttype
+from storage import Storage, StorageList, Settings, Messages
+from utils import web2py_uuid
+from gluon import *
+from fileutils import read_file
+
+import serializers
+import contrib.simplejson as simplejson
+
+
+__all__ = ['Mail', 'Auth', 'Recaptcha', 'Crud', 'Service', 'PluginManager', 'fetch', 'geocode', 'prettydate']
+
+logger = logging.getLogger("web2py")
+
+DEFAULT = lambda: None
+
+def callback(actions,form,tablename=None):
+    if actions:
+        if tablename and isinstance(actions,dict):
+            actions = actions.get(tablename, [])
+        if not isinstance(actions,(list, tuple)):
+            actions = [actions]
+        [action(form) for action in actions]
+
+def validators(*a):
+    b = []
+    for item in a:
+        if isinstance(item, (list, tuple)):
+            b = b + list(item)
+        else:
+            b.append(item)
+    return b
+
+def call_or_redirect(f,*args):
+    if callable(f):
+        redirect(f(*args))
+    else:
+        redirect(f)
+
+class Mail(object):
+    """
+    Class for configuring and sending emails with alternative text / html
+    body, multiple attachments and encryption support
+
+    Works with SMTP and Google App Engine.
+    """
+
+    class Attachment(MIMEBase.MIMEBase):
+        """
+        Email attachment
+
+        Arguments::
+
+            payload: path to file or file-like object with read() method
+            filename: name of the attachment stored in message; if set to
+                      None, it will be fetched from payload path; file-like
+                      object payload must have explicit filename specified
+            content_id: id of the attachment; automatically contained within
+                        < and >
+            content_type: content type of the attachment; if set to None,
+                          it will be fetched from filename using gluon.contenttype
+                          module
+            encoding: encoding of all strings passed to this function (except
+                      attachment body)
+
+        Content ID is used to identify attachments within the html body;
+        in example, attached image with content ID 'photo' may be used in
+        html message as a source of img tag .
+
+        Examples::
+
+            #Create attachment from text file:
+            attachment = Mail.Attachment('/path/to/file.txt')
+
+            Content-Type: text/plain
+            MIME-Version: 1.0
+            Content-Disposition: attachment; filename="file.txt"
+            Content-Transfer-Encoding: base64
+
+            SOMEBASE64CONTENT=
+
+            #Create attachment from image file with custom filename and cid:
+            attachment = Mail.Attachment('/path/to/file.png',
+                                             filename='photo.png',
+                                             content_id='photo')
+
+            Content-Type: image/png
+            MIME-Version: 1.0
+            Content-Disposition: attachment; filename="photo.png"
+            Content-Id: 
+            Content-Transfer-Encoding: base64
+
+            SOMEOTHERBASE64CONTENT=
+        """
+
+        def __init__(
+            self,
+            payload,
+            filename=None,
+            content_id=None,
+            content_type=None,
+            encoding='utf-8'):
+            if isinstance(payload, str):
+                if filename == None:
+                    filename = os.path.basename(payload)
+                payload = read_file(payload, 'rb')
+            else:
+                if filename == None:
+                    raise Exception('Missing attachment name')
+                payload = payload.read()
+            filename = filename.encode(encoding)
+            if content_type == None:
+                content_type = contenttype(filename)
+            self.my_filename = filename
+            self.my_payload = payload
+            MIMEBase.MIMEBase.__init__(self, *content_type.split('/', 1))
+            self.set_payload(payload)
+            self['Content-Disposition'] = 'attachment; filename="%s"' % filename
+            if content_id != None:
+                self['Content-Id'] = '<%s>' % content_id.encode(encoding)
+            Encoders.encode_base64(self)
+
+    def __init__(self, server=None, sender=None, login=None, tls=True):
+        """
+        Main Mail object
+
+        Arguments::
+
+            server: SMTP server address in address:port notation
+            sender: sender email address
+            login: sender login name and password in login:password notation
+                   or None if no authentication is required
+            tls: enables/disables encryption (True by default)
+
+        In Google App Engine use::
+
+            server='gae'
+
+        For sake of backward compatibility all fields are optional and default
+        to None, however, to be able to send emails at least server and sender
+        must be specified. They are available under following fields:
+
+            mail.settings.server
+            mail.settings.sender
+            mail.settings.login
+
+        When server is 'logging', email is logged but not sent (debug mode)
+
+        Optionally you can use PGP encryption or X509:
+
+            mail.settings.cipher_type = None
+            mail.settings.sign = True
+            mail.settings.sign_passphrase = None
+            mail.settings.encrypt = True
+            mail.settings.x509_sign_keyfile = None
+            mail.settings.x509_sign_certfile = None
+            mail.settings.x509_crypt_certfiles = None
+
+            cipher_type       : None
+                                gpg - need a python-pyme package and gpgme lib
+                                x509 - smime
+            sign              : sign the message (True or False)
+            sign_passphrase   : passphrase for key signing
+            encrypt           : encrypt the message
+                             ... x509 only ...
+            x509_sign_keyfile : the signers private key filename (PEM format)
+            x509_sign_certfile: the signers certificate filename (PEM format)
+            x509_crypt_certfiles: the certificates file to encrypt the messages
+                                  with can be a file name or a list of
+                                  file names (PEM format)
+
+        Examples::
+
+            #Create Mail object with authentication data for remote server:
+            mail = Mail('example.com:25', 'me@example.com', 'me:password')
+        """
+
+        settings = self.settings = Settings()
+        settings.server = server
+        settings.sender = sender
+        settings.login = login
+        settings.tls = tls
+        settings.ssl = False
+        settings.cipher_type = None
+        settings.sign = True
+        settings.sign_passphrase = None
+        settings.encrypt = True
+        settings.x509_sign_keyfile = None
+        settings.x509_sign_certfile = None
+        settings.x509_crypt_certfiles = None
+        settings.debug = False
+        settings.lock_keys = True
+        self.result = {}
+        self.error = None
+
+    def send(
+        self,
+        to,
+        subject='None',
+        message='None',
+        attachments=None,
+        cc=None,
+        bcc=None,
+        reply_to=None,
+        encoding='utf-8',
+        ):
+        """
+        Sends an email using data specified in constructor
+
+        Arguments::
+
+            to: list or tuple of receiver addresses; will also accept single
+                object
+            subject: subject of the email
+            message: email body text; depends on type of passed object:
+                     if 2-list or 2-tuple is passed: first element will be
+                     source of plain text while second of html text;
+                     otherwise: object will be the only source of plain text
+                     and html source will be set to None;
+                     If text or html source is:
+                     None: content part will be ignored,
+                     string: content part will be set to it,
+                     file-like object: content part will be fetched from
+                                       it using it's read() method
+            attachments: list or tuple of Mail.Attachment objects; will also
+                         accept single object
+            cc: list or tuple of carbon copy receiver addresses; will also
+                accept single object
+            bcc: list or tuple of blind carbon copy receiver addresses; will
+                also accept single object
+            reply_to: address to which reply should be composed
+            encoding: encoding of all strings passed to this method (including
+                      message bodies)
+
+        Examples::
+
+            #Send plain text message to single address:
+            mail.send('you@example.com',
+                      'Message subject',
+                      'Plain text body of the message')
+
+            #Send html message to single address:
+            mail.send('you@example.com',
+                      'Message subject',
+                      'Plain text body of the message')
+
+            #Send text and html message to three addresses (two in cc):
+            mail.send('you@example.com',
+                      'Message subject',
+                      ('Plain text body', 'html body'),
+                      cc=['other1@example.com', 'other2@example.com'])
+
+            #Send html only message with image attachment available from
+            the message by 'photo' content id:
+            mail.send('you@example.com',
+                      'Message subject',
+                      (None, ''),
+                      Mail.Attachment('/path/to/photo.jpg'
+                                      content_id='photo'))
+
+            #Send email with two attachments and no body text
+            mail.send('you@example.com,
+                      'Message subject',
+                      None,
+                      [Mail.Attachment('/path/to/fist.file'),
+                       Mail.Attachment('/path/to/second.file')])
+
+        Returns True on success, False on failure.
+
+        Before return, method updates two object's fields:
+        self.result: return value of smtplib.SMTP.sendmail() or GAE's
+                     mail.send_mail() method
+        self.error: Exception message or None if above was successful
+        """
+
+        def encode_header(key):
+            if [c for c in key if 32>ord(c) or ord(c)>127]:
+                return Header.Header(key.encode('utf-8'),'utf-8')
+            else:
+                return key
+
+        if not isinstance(self.settings.server, str):
+            raise Exception('Server address not specified')
+        if not isinstance(self.settings.sender, str):
+            raise Exception('Sender address not specified')
+        payload_in = MIMEMultipart.MIMEMultipart('mixed')
+        if to:
+            if not isinstance(to, (list,tuple)):
+                to = [to]
+        else:
+            raise Exception('Target receiver address not specified')
+        if cc:
+            if not isinstance(cc, (list, tuple)):
+                cc = [cc]
+        if bcc:
+            if not isinstance(bcc, (list, tuple)):
+                bcc = [bcc]
+        if message == None:
+            text = html = None
+        elif isinstance(message, (list, tuple)):
+            text, html = message
+        elif message.strip().startswith(''):
+            text = self.settings.server=='gae' and message or None
+            html = message
+        else:
+            text = message
+            html = None
+        if text != None or html != None:
+            attachment = MIMEMultipart.MIMEMultipart('alternative')
+            if text != None:
+                if isinstance(text, basestring):
+                    text = text.decode(encoding).encode('utf-8')
+                else:
+                    text = text.read().decode(encoding).encode('utf-8')
+                attachment.attach(MIMEText.MIMEText(text,_charset='utf-8'))
+            if html != None:
+                if isinstance(html, basestring):
+                    html = html.decode(encoding).encode('utf-8')
+                else:
+                    html = html.read().decode(encoding).encode('utf-8')
+                attachment.attach(MIMEText.MIMEText(html, 'html',_charset='utf-8'))
+            payload_in.attach(attachment)
+        if attachments == None:
+            pass
+        elif isinstance(attachments, (list, tuple)):
+            for attachment in attachments:
+                payload_in.attach(attachment)
+        else:
+            payload_in.attach(attachments)
+
+
+        #######################################################
+        #                      CIPHER                         #
+        #######################################################
+        cipher_type = self.settings.cipher_type
+        sign = self.settings.sign
+        sign_passphrase = self.settings.sign_passphrase
+        encrypt = self.settings.encrypt
+        #######################################################
+        #                       GPGME                         #
+        #######################################################
+        if cipher_type == 'gpg':
+            if not sign and not encrypt:
+                self.error="No sign and no encrypt is set but cipher type to gpg"
+                return False
+
+            # need a python-pyme package and gpgme lib
+            from pyme import core, errors
+            from pyme.constants.sig import mode
+            ############################################
+            #                   sign                   #
+            ############################################
+            if sign:
+                import string
+                core.check_version(None)
+                pin=string.replace(payload_in.as_string(),'\n','\r\n')
+                plain = core.Data(pin)
+                sig = core.Data()
+                c = core.Context()
+                c.set_armor(1)
+                c.signers_clear()
+                # search for signing key for From:
+                for sigkey in c.op_keylist_all(self.settings.sender, 1):
+                    if sigkey.can_sign:
+                        c.signers_add(sigkey)
+                if not c.signers_enum(0):
+                    self.error='No key for signing [%s]' % self.settings.sender
+                    return False
+                c.set_passphrase_cb(lambda x,y,z: sign_passphrase)
+                try:
+                    # make a signature
+                    c.op_sign(plain,sig,mode.DETACH)
+                    sig.seek(0,0)
+                    # make it part of the email
+                    payload=MIMEMultipart.MIMEMultipart('signed',
+                                                        boundary=None,
+                                                        _subparts=None,
+                                                        **dict(micalg="pgp-sha1",
+                                                               protocol="application/pgp-signature"))
+                    # insert the origin payload
+                    payload.attach(payload_in)
+                    # insert the detached signature
+                    p=MIMEBase.MIMEBase("application",'pgp-signature')
+                    p.set_payload(sig.read())
+                    payload.attach(p)
+                    # it's just a trick to handle the no encryption case
+                    payload_in=payload
+                except errors.GPGMEError, ex:
+                    self.error="GPG error: %s" % ex.getstring()
+                    return False
+            ############################################
+            #                  encrypt                 #
+            ############################################
+            if encrypt:
+                core.check_version(None)
+                plain = core.Data(payload_in.as_string())
+                cipher = core.Data()
+                c = core.Context()
+                c.set_armor(1)
+                # collect the public keys for encryption
+                recipients=[]
+                rec=to[:]
+                if cc:
+                    rec.extend(cc)
+                if bcc:
+                    rec.extend(bcc)
+                for addr in rec:
+                    c.op_keylist_start(addr,0)
+                    r = c.op_keylist_next()
+                    if r == None:
+                        self.error='No key for [%s]' % addr
+                        return False
+                    recipients.append(r)
+                try:
+                    # make the encryption
+                    c.op_encrypt(recipients, 1, plain, cipher)
+                    cipher.seek(0,0)
+                    # make it a part of the email
+                    payload=MIMEMultipart.MIMEMultipart('encrypted',
+                                                        boundary=None,
+                                                        _subparts=None,
+                                                        **dict(protocol="application/pgp-encrypted"))
+                    p=MIMEBase.MIMEBase("application",'pgp-encrypted')
+                    p.set_payload("Version: 1\r\n")
+                    payload.attach(p)
+                    p=MIMEBase.MIMEBase("application",'octet-stream')
+                    p.set_payload(cipher.read())
+                    payload.attach(p)
+                except errors.GPGMEError, ex:
+                    self.error="GPG error: %s" % ex.getstring()
+                    return False
+        #######################################################
+        #                       X.509                         #
+        #######################################################
+        elif cipher_type == 'x509':
+            if not sign and not encrypt:
+                self.error="No sign and no encrypt is set but cipher type to x509"
+                return False
+            x509_sign_keyfile=self.settings.x509_sign_keyfile
+            if self.settings.x509_sign_certfile:
+                x509_sign_certfile=self.settings.x509_sign_certfile
+            else:
+                # if there is no sign certfile we'll assume the
+                # cert is in keyfile
+                x509_sign_certfile=self.settings.x509_sign_keyfile
+            # crypt certfiles could be a string or a list
+            x509_crypt_certfiles=self.settings.x509_crypt_certfiles
+
+
+            # need m2crypto
+            from M2Crypto import BIO, SMIME, X509
+            msg_bio = BIO.MemoryBuffer(payload_in.as_string())
+            s = SMIME.SMIME()
+
+            #                   SIGN
+            if sign:
+                #key for signing
+                try:
+                    s.load_key(x509_sign_keyfile, x509_sign_certfile, callback=lambda x: sign_passphrase)
+                    if encrypt:
+                        p7 = s.sign(msg_bio)
+                    else:
+                        p7 = s.sign(msg_bio,flags=SMIME.PKCS7_DETACHED)
+                    msg_bio = BIO.MemoryBuffer(payload_in.as_string()) # Recreate coz sign() has consumed it.
+                except Exception,e:
+                    self.error="Something went wrong on signing: <%s>" %str(e)
+                    return False
+
+            #                   ENCRYPT
+            if encrypt:
+                try:
+                    sk = X509.X509_Stack()
+                    if not isinstance(x509_crypt_certfiles, (list, tuple)):
+                        x509_crypt_certfiles = [x509_crypt_certfiles]
+
+                    # make an encryption cert's stack
+                    for x in x509_crypt_certfiles:
+                        sk.push(X509.load_cert(x))
+                    s.set_x509_stack(sk)
+
+                    s.set_cipher(SMIME.Cipher('des_ede3_cbc'))
+                    tmp_bio = BIO.MemoryBuffer()
+                    if sign:
+                        s.write(tmp_bio, p7)
+                    else:
+                        tmp_bio.write(payload_in.as_string())
+                    p7 = s.encrypt(tmp_bio)
+                except Exception,e:
+                    self.error="Something went wrong on encrypting: <%s>" %str(e)
+                    return False
+
+            #                 Final stage in sign and encryption
+            out = BIO.MemoryBuffer()
+            if encrypt:
+                s.write(out, p7)
+            else:
+                if sign:
+                    s.write(out, p7, msg_bio, SMIME.PKCS7_DETACHED)
+                else:
+                    out.write('\r\n')
+                    out.write(payload_in.as_string())
+            out.close()
+            st=str(out.read())
+            payload=message_from_string(st)
+        else:
+            # no cryptography process as usual
+            payload=payload_in
+        payload['From'] = encode_header(self.settings.sender.decode(encoding))
+        origTo = to[:]
+        if to:
+            payload['To'] = encode_header(', '.join(to).decode(encoding))
+        if reply_to:
+            payload['Reply-To'] = encode_header(reply_to.decode(encoding))
+        if cc:
+            payload['Cc'] = encode_header(', '.join(cc).decode(encoding))
+            to.extend(cc)
+        if bcc:
+            to.extend(bcc)
+        payload['Subject'] = encode_header(subject.decode(encoding))
+        payload['Date'] = time.strftime("%a, %d %b %Y %H:%M:%S +0000",
+                                        time.gmtime())
+        result = {}
+        try:
+            if self.settings.server == 'logging':
+                logger.warn('email not sent\n%s\nFrom: %s\nTo: %s\n\n%s\n%s\n' % \
+                                 ('-'*40,self.settings.sender,
+                                  ', '.join(to),text or html,'-'*40))
+            elif self.settings.server == 'gae':
+                xcc = dict()
+                if cc:
+                    xcc['cc'] = cc
+                if bcc:
+                    xcc['bcc'] = bcc
+                from google.appengine.api import mail
+                attachments = attachments and [(a.my_filename,a.my_payload) for a in attachments]
+                if attachments:
+                    result = mail.send_mail(sender=self.settings.sender, to=origTo,
+                                            subject=subject, body=text, html=html,
+                                            attachments=attachments, **xcc)
+                elif html:
+                    result = mail.send_mail(sender=self.settings.sender, to=origTo,
+                                            subject=subject, body=text, html=html, **xcc)
+                else:
+                    result = mail.send_mail(sender=self.settings.sender, to=origTo,
+                                            subject=subject, body=text, **xcc)
+            else:
+                smtp_args = self.settings.server.split(':')
+                if self.settings.ssl: 
+                    server = smtplib.SMTP_SSL(*smtp_args)
+                else: 
+                    server = smtplib.SMTP(*smtp_args)
+                if self.settings.tls and not self.settings.ssl:                
+                    server.ehlo()
+                    server.starttls()
+                    server.ehlo()
+                if self.settings.login != None:
+                    server.login(*self.settings.login.split(':',1))
+                result = server.sendmail(self.settings.sender, to, payload.as_string())
+                server.quit()
+        except Exception, e:
+            logger.warn('Mail.send failure:%s' % e)
+            self.result = result
+            self.error = e
+            return False
+        self.result = result
+        self.error = None
+        return True
+
+
+class Recaptcha(DIV):
+
+    API_SSL_SERVER = 'https://www.google.com/recaptcha/api'
+    API_SERVER = 'http://www.google.com/recaptcha/api'
+    VERIFY_SERVER = 'http://www.google.com/recaptcha/api/verify'
+
+    def __init__(
+        self,
+        request,
+        public_key='',
+        private_key='',
+        use_ssl=False,
+        error=None,
+        error_message='invalid',
+        label = 'Verify:',
+        options = ''
+        ):
+        self.remote_addr = request.env.remote_addr
+        self.public_key = public_key
+        self.private_key = private_key
+        self.use_ssl = use_ssl
+        self.error = error
+        self.errors = Storage()
+        self.error_message = error_message
+        self.components = []
+        self.attributes = {}
+        self.label = label
+        self.options = options
+        self.comment = ''
+
+    def _validate(self):
+
+        # for local testing:
+
+        recaptcha_challenge_field = \
+            self.request_vars.recaptcha_challenge_field
+        recaptcha_response_field = \
+            self.request_vars.recaptcha_response_field
+        private_key = self.private_key
+        remoteip = self.remote_addr
+        if not (recaptcha_response_field and recaptcha_challenge_field
+                 and len(recaptcha_response_field)
+                 and len(recaptcha_challenge_field)):
+            self.errors['captcha'] = self.error_message
+            return False
+        params = urllib.urlencode({
+            'privatekey': private_key,
+            'remoteip': remoteip,
+            'challenge': recaptcha_challenge_field,
+            'response': recaptcha_response_field,
+            })
+        request = urllib2.Request(
+            url=self.VERIFY_SERVER,
+            data=params,
+            headers={'Content-type': 'application/x-www-form-urlencoded',
+                        'User-agent': 'reCAPTCHA Python'})
+        httpresp = urllib2.urlopen(request)
+        return_values = httpresp.read().splitlines()
+        httpresp.close()
+        return_code = return_values[0]
+        if return_code == 'true':
+            del self.request_vars.recaptcha_challenge_field
+            del self.request_vars.recaptcha_response_field
+            self.request_vars.captcha = ''
+            return True
+        self.errors['captcha'] = self.error_message
+        return False
+
+    def xml(self):
+        public_key = self.public_key
+        use_ssl = self.use_ssl
+        error_param = ''
+        if self.error:
+            error_param = '&error=%s' % self.error
+        if use_ssl:
+            server = self.API_SSL_SERVER
+        else:
+            server = self.API_SERVER
+        captcha = DIV(
+            SCRIPT("var RecaptchaOptions = {%s};" % self.options),
+            SCRIPT(_type="text/javascript",
+                   _src="%s/challenge?k=%s%s" % (server,public_key,error_param)),
+            TAG.noscript(IFRAME(_src="%s/noscript?k=%s%s" % (server,public_key,error_param),
+                                _height="300",_width="500",_frameborder="0"), BR(),
+                         INPUT(_type='hidden', _name='recaptcha_response_field',
+                               _value='manual_challenge')), _id='recaptcha')
+        if not self.errors.captcha:
+            return XML(captcha).xml()
+        else:
+            captcha.append(DIV(self.errors['captcha'], _class='error'))
+            return XML(captcha).xml()
+
+
+def addrow(form,a,b,c,style,_id,position=-1):
+    if style == "divs":
+        form[0].insert(position, DIV(DIV(LABEL(a),_class='w2p_fl'),
+                                     DIV(b, _class='w2p_fw'),
+                                     DIV(c, _class='w2p_fc'),
+                                     _id = _id))
+    elif style == "table2cols":
+        form[0].insert(position, TR(LABEL(a),''))
+        form[0].insert(position+1, TR(b, _colspan=2, _id = _id))
+    elif style == "ul":
+        form[0].insert(position, LI(DIV(LABEL(a),_class='w2p_fl'),
+                                    DIV(b, _class='w2p_fw'),
+                                    DIV(c, _class='w2p_fc'),
+                                    _id = _id))
+    else:
+        form[0].insert(position, TR(LABEL(a),b,c,_id = _id))
+
+
+class Auth(object):
+    """
+    Class for authentication, authorization, role based access control.
+
+    Includes:
+
+    - registration and profile
+    - login and logout
+    - username and password retrieval
+    - event logging
+    - role creation and assignment
+    - user defined group/role based permission
+
+    Authentication Example::
+
+        from contrib.utils import *
+        mail=Mail()
+        mail.settings.server='smtp.gmail.com:587'
+        mail.settings.sender='you@somewhere.com'
+        mail.settings.login='username:password'
+        auth=Auth(globals(), db)
+        auth.settings.mailer=mail
+        # auth.settings....=...
+        auth.define_tables()
+        def authentication():
+            return dict(form=auth())
+
+    exposes:
+
+    - http://.../{application}/{controller}/authentication/login
+    - http://.../{application}/{controller}/authentication/logout
+    - http://.../{application}/{controller}/authentication/register
+    - http://.../{application}/{controller}/authentication/verify_email
+    - http://.../{application}/{controller}/authentication/retrieve_username
+    - http://.../{application}/{controller}/authentication/retrieve_password
+    - http://.../{application}/{controller}/authentication/reset_password
+    - http://.../{application}/{controller}/authentication/profile
+    - http://.../{application}/{controller}/authentication/change_password
+
+    On registration a group with role=new_user.id is created
+    and user is given membership of this group.
+
+    You can create a group with::
+
+        group_id=auth.add_group('Manager', 'can access the manage action')
+        auth.add_permission(group_id, 'access to manage')
+
+    Here \"access to manage\" is just a user defined string.
+    You can give access to a user::
+
+        auth.add_membership(group_id, user_id)
+
+    If user id is omitted, the logged in user is assumed
+
+    Then you can decorate any action::
+
+        @auth.requires_permission('access to manage')
+        def manage():
+            return dict()
+
+    You can restrict a permission to a specific table::
+
+        auth.add_permission(group_id, 'edit', db.sometable)
+        @auth.requires_permission('edit', db.sometable)
+
+    Or to a specific record::
+
+        auth.add_permission(group_id, 'edit', db.sometable, 45)
+        @auth.requires_permission('edit', db.sometable, 45)
+
+    If authorization is not granted calls::
+
+        auth.settings.on_failed_authorization
+
+    Other options::
+
+        auth.settings.mailer=None
+        auth.settings.expiration=3600 # seconds
+
+        ...
+
+        ### these are messages that can be customized
+        ...
+    """
+
+
+    def url(self, f=None, args=[], vars={}):
+        return URL(c=self.settings.controller,f=f,args=args,vars=vars)
+
+    def __init__(self, environment=None, db=None,
+                 controller='default', cas_provider = None):
+        """
+        auth=Auth(globals(), db)
+
+        - environment is there for legacy but unused (awful)
+        - db has to be the database where to create tables for authentication
+
+        """
+        ## next two lines for backward compatibility
+        if not db and environment and isinstance(environment,DAL):
+            db = environment
+        self.db = db
+        self.environment = current
+        request = current.request
+        session = current.session
+        auth = session.auth
+        if auth and auth.last_visit and auth.last_visit + \
+                datetime.timedelta(days=0, seconds=auth.expiration) > request.now:
+            self.user = auth.user
+            # this is a trick to speed up sessions
+            if (request.now - auth.last_visit).seconds > (auth.expiration/10):
+                auth.last_visit = request.now
+        else:
+            self.user = None
+            session.auth = None
+        settings = self.settings = Settings()
+
+        # ## what happens after login?
+
+        # ## what happens after registration?
+
+        settings.hideerror = False
+        settings.cas_domains = [request.env.http_host]
+        settings.cas_provider = cas_provider
+        settings.extra_fields = {}
+        settings.actions_disabled = []
+        settings.reset_password_requires_verification = False
+        settings.registration_requires_verification = False
+        settings.registration_requires_approval = False
+        settings.alternate_requires_registration = False
+        settings.create_user_groups = True
+
+        settings.controller = controller
+        settings.login_url = self.url('user', args='login')
+        settings.logged_url = self.url('user', args='profile')
+        settings.download_url = self.url('download')
+        settings.mailer = None
+        settings.login_captcha = None
+        settings.register_captcha = None
+        settings.retrieve_username_captcha = None
+        settings.retrieve_password_captcha = None
+        settings.captcha = None
+        settings.expiration = 3600            # one hour
+        settings.long_expiration = 3600*30*24 # one month
+        settings.remember_me_form = True
+        settings.allow_basic_login = False
+        settings.allow_basic_login_only = False
+        settings.on_failed_authorization = \
+            self.url('user',args='not_authorized')
+
+        settings.on_failed_authentication = lambda x: redirect(x)
+
+        settings.formstyle = 'table3cols'
+        settings.label_separator = ': '
+
+        # ## table names to be used
+
+        settings.password_field = 'password'
+        settings.table_user_name = 'auth_user'
+        settings.table_group_name = 'auth_group'
+        settings.table_membership_name = 'auth_membership'
+        settings.table_permission_name = 'auth_permission'
+        settings.table_event_name = 'auth_event'
+        settings.table_cas_name = 'auth_cas'
+
+        # ## if none, they will be created
+
+        settings.table_user = None
+        settings.table_group = None
+        settings.table_membership = None
+        settings.table_permission = None
+        settings.table_event = None
+        settings.table_cas = None
+
+        # ##
+
+        settings.showid = False
+
+        # ## these should be functions or lambdas
+
+        settings.login_next = self.url('index')
+        settings.login_onvalidation = []
+        settings.login_onaccept = []
+        settings.login_methods = [self]
+        settings.login_form = self
+        settings.login_email_validate = True
+        settings.login_userfield = None
+
+        settings.logout_next = self.url('index')
+        settings.logout_onlogout = None
+
+        settings.register_next = self.url('index')
+        settings.register_onvalidation = []
+        settings.register_onaccept = []
+        settings.register_fields = None
+
+        settings.verify_email_next = self.url('user', args='login')
+        settings.verify_email_onaccept = []
+
+        settings.profile_next = self.url('index')
+        settings.profile_onvalidation = []
+        settings.profile_onaccept = []
+        settings.profile_fields = None
+        settings.retrieve_username_next = self.url('index')
+        settings.retrieve_password_next = self.url('index')
+        settings.request_reset_password_next = self.url('user', args='login')
+        settings.reset_password_next = self.url('user', args='login')
+
+        settings.change_password_next = self.url('index')
+        settings.change_password_onvalidation = []
+        settings.change_password_onaccept = []
+
+        settings.retrieve_password_onvalidation = []
+        settings.reset_password_onvalidation = []
+
+        settings.hmac_key = None
+        settings.lock_keys = True
+
+
+        # ## these are messages that can be customized
+        messages = self.messages = Messages(current.T)
+        messages.login_button = 'Login'
+        messages.register_button = 'Register'
+        messages.password_reset_button = 'Request reset password'
+        messages.password_change_button = 'Change password'
+        messages.profile_save_button = 'Save profile'
+        messages.submit_button = 'Submit'
+        messages.verify_password = 'Verify Password'
+        messages.delete_label = 'Check to delete:'
+        messages.function_disabled = 'Function disabled'
+        messages.access_denied = 'Insufficient privileges'
+        messages.registration_verifying = 'Registration needs verification'
+        messages.registration_pending = 'Registration is pending approval'
+        messages.login_disabled = 'Login disabled by administrator'
+        messages.logged_in = 'Logged in'
+        messages.email_sent = 'Email sent'
+        messages.unable_to_send_email = 'Unable to send email'
+        messages.email_verified = 'Email verified'
+        messages.logged_out = 'Logged out'
+        messages.registration_successful = 'Registration successful'
+        messages.invalid_email = 'Invalid email'
+        messages.unable_send_email = 'Unable to send email'
+        messages.invalid_login = 'Invalid login'
+        messages.invalid_user = 'Invalid user'
+        messages.invalid_password = 'Invalid password'
+        messages.is_empty = "Cannot be empty"
+        messages.mismatched_password = "Password fields don't match"
+        messages.verify_email = \
+            'Click on the link http://...verify_email/%(key)s to verify your email'
+        messages.verify_email_subject = 'Email verification'
+        messages.username_sent = 'Your username was emailed to you'
+        messages.new_password_sent = 'A new password was emailed to you'
+        messages.password_changed = 'Password changed'
+        messages.retrieve_username = 'Your username is: %(username)s'
+        messages.retrieve_username_subject = 'Username retrieve'
+        messages.retrieve_password = 'Your password is: %(password)s'
+        messages.retrieve_password_subject = 'Password retrieve'
+        messages.reset_password = \
+            'Click on the link http://...reset_password/%(key)s to reset your password'
+        messages.reset_password_subject = 'Password reset'
+        messages.invalid_reset_password = 'Invalid reset password'
+        messages.profile_updated = 'Profile updated'
+        messages.new_password = 'New password'
+        messages.old_password = 'Old password'
+        messages.group_description = \
+            'Group uniquely assigned to user %(id)s'
+
+        messages.register_log = 'User %(id)s Registered'
+        messages.login_log = 'User %(id)s Logged-in'
+        messages.login_failed_log = None
+        messages.logout_log = 'User %(id)s Logged-out'
+        messages.profile_log = 'User %(id)s Profile updated'
+        messages.verify_email_log = 'User %(id)s Verification email sent'
+        messages.retrieve_username_log = 'User %(id)s Username retrieved'
+        messages.retrieve_password_log = 'User %(id)s Password retrieved'
+        messages.reset_password_log = 'User %(id)s Password reset'
+        messages.change_password_log = 'User %(id)s Password changed'
+        messages.add_group_log = 'Group %(group_id)s created'
+        messages.del_group_log = 'Group %(group_id)s deleted'
+        messages.add_membership_log = None
+        messages.del_membership_log = None
+        messages.has_membership_log = None
+        messages.add_permission_log = None
+        messages.del_permission_log = None
+        messages.has_permission_log = None
+        messages.impersonate_log = 'User %(id)s is impersonating %(other_id)s'
+
+        messages.label_first_name = 'First name'
+        messages.label_last_name = 'Last name'
+        messages.label_username = 'Username'
+        messages.label_email = 'E-mail'
+        messages.label_password = 'Password'
+        messages.label_registration_key = 'Registration key'
+        messages.label_reset_password_key = 'Reset Password key'
+        messages.label_registration_id = 'Registration identifier'
+        messages.label_role = 'Role'
+        messages.label_description = 'Description'
+        messages.label_user_id = 'User ID'
+        messages.label_group_id = 'Group ID'
+        messages.label_name = 'Name'
+        messages.label_table_name = 'Table name'
+        messages.label_record_id = 'Record ID'
+        messages.label_time_stamp = 'Timestamp'
+        messages.label_client_ip = 'Client IP'
+        messages.label_origin = 'Origin'
+        messages.label_remember_me = "Remember me (for 30 days)"
+        messages['T'] = current.T
+        messages.verify_password_comment = 'please input your password again'
+        messages.lock_keys = True
+
+        # for "remember me" option
+        response = current.response
+        if auth  and  auth.remember: #when user wants to be logged in for longer
+            response.cookies[response.session_id_name]["expires"] = \
+                auth.expiration
+
+        def lazy_user (auth = self): return auth.user_id
+        reference_user = 'reference %s' % settings.table_user_name
+        def represent(id,record=None,s=settings):
+            try:
+                user = s.table_user(id)
+                return '%(first_name)s %(last_name)s' % user
+            except: return id
+        self.signature = db.Table(self.db,'auth_signature',
+                                  Field('is_active','boolean',default=True),
+                                  Field('created_on','datetime',
+                                        default=request.now,
+                                        writable=False,readable=False),
+                                  Field('created_by',
+                                        reference_user,
+                                        default=lazy_user,represent=represent,
+                                        writable=False,readable=False,
+                                        ),
+                                  Field('modified_on','datetime',
+                                        update=request.now,default=request.now,
+                                        writable=False,readable=False),
+                                  Field('modified_by',
+                                        reference_user,represent=represent,
+                                        default=lazy_user,update=lazy_user,
+                                        writable=False,readable=False))
+
+
+
+    def _get_user_id(self):
+       "accessor for auth.user_id"
+       return self.user and self.user.id or None
+    user_id = property(_get_user_id, doc="user.id or None")
+
+    def _HTTP(self, *a, **b):
+        """
+        only used in lambda: self._HTTP(404)
+        """
+
+        raise HTTP(*a, **b)
+
+    def __call__(self):
+        """
+        usage:
+
+        def authentication(): return dict(form=auth())
+        """
+
+        request = current.request
+        args = request.args
+        if not args:
+            redirect(self.url(args='login',vars=request.vars))
+        elif args[0] in self.settings.actions_disabled:
+            raise HTTP(404)
+        if args[0] in ('login','logout','register','verify_email',
+                       'retrieve_username','retrieve_password',
+                       'reset_password','request_reset_password',
+                       'change_password','profile','groups',
+                       'impersonate','not_authorized'):
+            return getattr(self,args[0])()
+        elif args[0]=='cas' and not self.settings.cas_provider:
+            if args(1) == 'login': return self.cas_login(version=2)
+            if args(1) == 'validate': return self.cas_validate(version=2)
+            if args(1) == 'logout': return self.logout()
+        else:
+            raise HTTP(404)
+
+    def navbar(self,prefix='Welcome',action=None):
+        request = current.request
+        T = current.T
+        if isinstance(prefix,str):
+            prefix = T(prefix)
+        if not action:
+            action=URL(request.application,request.controller,'user')
+        if prefix:
+            prefix = prefix.strip()+' '
+        if self.user_id:
+            logout=A(T('logout'),_href=action+'/logout')
+            profile=A(T('profile'),_href=action+'/profile')
+            password=A(T('password'),_href=action+'/change_password')
+            bar = SPAN(prefix,self.user.first_name,' [ ', logout, ']',_class='auth_navbar')
+            if not 'profile' in self.settings.actions_disabled:
+                bar.insert(4, ' | ')
+                bar.insert(5, profile)
+            if not 'change_password' in self.settings.actions_disabled:
+                bar.insert(-1, ' | ')
+                bar.insert(-1, password)
+        else:
+            login=A(T('login'),_href=action+'/login')
+            register=A(T('register'),_href=action+'/register')
+            retrieve_username=A(T('forgot username?'),
+                            _href=action+'/retrieve_username')
+            lost_password=A(T('lost password?'),
+                            _href=action+'/request_reset_password')
+            bar = SPAN('[ ',login,' ]',_class='auth_navbar')
+
+            if not 'register' in self.settings.actions_disabled:
+                bar.insert(2, ' | ')
+                bar.insert(3, register)
+            if 'username' in self.settings.table_user.fields() and \
+                    not 'retrieve_username' in self.settings.actions_disabled:
+                bar.insert(-1, ' | ')
+                bar.insert(-1, retrieve_username)
+            if not 'request_reset_password' in self.settings.actions_disabled:
+                bar.insert(-1, ' | ')
+                bar.insert(-1, lost_password)
+        return bar
+
+    def __get_migrate(self, tablename, migrate=True):
+
+        if type(migrate).__name__ == 'str':
+            return (migrate + tablename + '.table')
+        elif migrate == False:
+            return False
+        else:
+            return True
+
+    def define_tables(self, username=False, migrate=True, fake_migrate=False):
+        """
+        to be called unless tables are defined manually
+
+        usages::
+
+            # defines all needed tables and table files
+            # 'myprefix_auth_user.table', ...
+            auth.define_tables(migrate='myprefix_')
+
+            # defines all needed tables without migration/table files
+            auth.define_tables(migrate=False)
+
+        """
+
+        db = self.db
+        settings = self.settings
+        if not settings.table_user_name in db.tables:
+            passfield = settings.password_field
+            if username or settings.cas_provider:
+                table = db.define_table(
+                    settings.table_user_name,
+                    Field('first_name', length=128, default='',
+                          label=self.messages.label_first_name),
+                    Field('last_name', length=128, default='',
+                          label=self.messages.label_last_name),
+                    Field('username', length=128, default='',
+                          label=self.messages.label_username),
+                    Field('email', length=512, default='',
+                          label=self.messages.label_email),
+                    Field(passfield, 'password', length=512,
+                          readable=False, label=self.messages.label_password),
+                    Field('registration_key', length=512,
+                          writable=False, readable=False, default='',
+                          label=self.messages.label_registration_key),
+                    Field('reset_password_key', length=512,
+                          writable=False, readable=False, default='',
+                          label=self.messages.label_reset_password_key),
+                    Field('registration_id', length=512,
+                          writable=False, readable=False, default='',
+                          label=self.messages.label_registration_id),
+                    *settings.extra_fields.get(settings.table_user_name,[]),
+                    **dict(
+                        migrate=self.__get_migrate(settings.table_user_name,
+                                                   migrate),
+                        fake_migrate=fake_migrate,
+                        format='%(username)s'))
+                table.username.requires = (IS_MATCH('[\w\.\-]+'),
+                                           IS_NOT_IN_DB(db, table.username))
+            else:
+                table = db.define_table(
+                    settings.table_user_name,
+                    Field('first_name', length=128, default='',
+                          label=self.messages.label_first_name),
+                    Field('last_name', length=128, default='',
+                          label=self.messages.label_last_name),
+                    Field('email', length=512, default='',
+                          label=self.messages.label_email),
+                    Field(passfield, 'password', length=512,
+                          readable=False, label=self.messages.label_password),
+                    Field('registration_key', length=512,
+                          writable=False, readable=False, default='',
+                          label=self.messages.label_registration_key),
+                    Field('reset_password_key', length=512,
+                          writable=False, readable=False, default='',
+                          label=self.messages.label_reset_password_key),
+                    *settings.extra_fields.get(settings.table_user_name,[]),
+                    **dict(
+                        migrate=self.__get_migrate(settings.table_user_name,
+                                                   migrate),
+                        fake_migrate=fake_migrate,
+                        format='%(first_name)s %(last_name)s (%(id)s)'))
+            table.first_name.requires = \
+                IS_NOT_EMPTY(error_message=self.messages.is_empty)
+            table.last_name.requires = \
+                IS_NOT_EMPTY(error_message=self.messages.is_empty)
+            table[passfield].requires = [CRYPT(key=settings.hmac_key)]
+            table.email.requires = \
+                [IS_EMAIL(error_message=self.messages.invalid_email),
+                 IS_NOT_IN_DB(db, table.email)]
+            table.registration_key.default = ''
+        settings.table_user = db[settings.table_user_name]
+        if not settings.table_group_name in db.tables:
+            table = db.define_table(
+                settings.table_group_name,
+                Field('role', length=512, default='',
+                        label=self.messages.label_role),
+                Field('description', 'text',
+                        label=self.messages.label_description),
+                *settings.extra_fields.get(settings.table_group_name,[]),
+                **dict(
+                    migrate=self.__get_migrate(
+                        settings.table_group_name, migrate),
+                    fake_migrate=fake_migrate,
+                    format = '%(role)s (%(id)s)'))
+            table.role.requires = IS_NOT_IN_DB(db, '%s.role'
+                 % settings.table_group_name)
+        settings.table_group = db[settings.table_group_name]
+        if not settings.table_membership_name in db.tables:
+            table = db.define_table(
+                settings.table_membership_name,
+                Field('user_id', settings.table_user,
+                        label=self.messages.label_user_id),
+                Field('group_id', settings.table_group,
+                        label=self.messages.label_group_id),
+                *settings.extra_fields.get(settings.table_membership_name,[]),
+                **dict(
+                    migrate=self.__get_migrate(
+                        settings.table_membership_name, migrate),
+                    fake_migrate=fake_migrate))
+            table.user_id.requires = IS_IN_DB(db, '%s.id' %
+                    settings.table_user_name,
+                    '%(first_name)s %(last_name)s (%(id)s)')
+            table.group_id.requires = IS_IN_DB(db, '%s.id' %
+                    settings.table_group_name,
+                    '%(role)s (%(id)s)')
+        settings.table_membership = db[settings.table_membership_name]
+        if not settings.table_permission_name in db.tables:
+            table = db.define_table(
+                settings.table_permission_name,
+                Field('group_id', settings.table_group,
+                        label=self.messages.label_group_id),
+                Field('name', default='default', length=512,
+                        label=self.messages.label_name),
+                Field('table_name', length=512,
+                        label=self.messages.label_table_name),
+                Field('record_id', 'integer',default=0,
+                        label=self.messages.label_record_id),
+                *settings.extra_fields.get(settings.table_permission_name,[]),
+                **dict(
+                    migrate=self.__get_migrate(
+                        settings.table_permission_name, migrate),
+                    fake_migrate=fake_migrate))
+            table.group_id.requires = IS_IN_DB(db, '%s.id' %
+                    settings.table_group_name,
+                    '%(role)s (%(id)s)')
+            table.name.requires = IS_NOT_EMPTY(error_message=self.messages.is_empty)
+            table.table_name.requires = IS_EMPTY_OR(IS_IN_SET(self.db.tables))
+            table.record_id.requires = IS_INT_IN_RANGE(0, 10 ** 9)
+        settings.table_permission = db[settings.table_permission_name]
+        if not settings.table_event_name in db.tables:
+            table  = db.define_table(
+                settings.table_event_name,
+                Field('time_stamp', 'datetime',
+                        default=current.request.now,
+                        label=self.messages.label_time_stamp),
+                Field('client_ip',
+                        default=current.request.client,
+                        label=self.messages.label_client_ip),
+                Field('user_id', settings.table_user, default=None,
+                        label=self.messages.label_user_id),
+                Field('origin', default='auth', length=512,
+                        label=self.messages.label_origin),
+                Field('description', 'text', default='',
+                        label=self.messages.label_description),
+                *settings.extra_fields.get(settings.table_event_name,[]),
+                **dict(
+                    migrate=self.__get_migrate(
+                        settings.table_event_name, migrate),
+                    fake_migrate=fake_migrate))
+            table.user_id.requires = IS_IN_DB(db, '%s.id' %
+                    settings.table_user_name,
+                    '%(first_name)s %(last_name)s (%(id)s)')
+            table.origin.requires = IS_NOT_EMPTY(error_message=self.messages.is_empty)
+            table.description.requires = IS_NOT_EMPTY(error_message=self.messages.is_empty)
+        settings.table_event = db[settings.table_event_name]
+        now = current.request.now
+        if settings.cas_domains:
+            if not settings.table_cas_name in db.tables:
+                table  = db.define_table(
+                    settings.table_cas_name,
+                    Field('user_id', settings.table_user, default=None,
+                          label=self.messages.label_user_id),
+                    Field('created_on','datetime',default=now),
+                    Field('url',requires=IS_URL()),
+                    Field('uuid'),
+                    *settings.extra_fields.get(settings.table_cas_name,[]),
+                    **dict(
+                        migrate=self.__get_migrate(
+                            settings.table_event_name, migrate),
+                        fake_migrate=fake_migrate))
+                table.user_id.requires = IS_IN_DB(db, '%s.id' % \
+                    settings.table_user_name,
+                    '%(first_name)s %(last_name)s (%(id)s)')
+            settings.table_cas = db[settings.table_cas_name]
+        if settings.cas_provider:
+            settings.actions_disabled = \
+                ['profile','register','change_password','request_reset_password']
+            from gluon.contrib.login_methods.cas_auth import CasAuth
+            maps = dict((name,lambda v,n=name:v.get(n,None)) for name in \
+                            settings.table_user.fields if name!='id' \
+                            and settings.table_user[name].readable)
+            maps['registration_id'] = \
+                lambda v,p=settings.cas_provider:'%s/%s' % (p,v['user'])
+            settings.login_form = CasAuth(
+                casversion = 2,
+                urlbase = settings.cas_provider,
+                actions=['login','validate','logout'],
+                maps=maps)
+
+
+    def log_event(self, description, origin='auth'):
+        """
+        usage::
+
+            auth.log_event(description='this happened', origin='auth')
+        """
+
+        if self.is_logged_in():
+            user_id = self.user.id
+        else:
+            user_id = None  # user unknown
+        self.settings.table_event.insert(description=description,
+                                         origin=origin, user_id=user_id)
+
+    def get_or_create_user(self, keys):
+        """
+        Used for alternate login methods:
+            If the user exists already then password is updated.
+            If the user doesn't yet exist, then they are created.
+        """
+        table_user = self.settings.table_user
+        if 'registration_id' in table_user.fields() and \
+                'registration_id' in keys:
+            username = 'registration_id'
+        elif 'username' in table_user.fields():
+            username = 'username'
+        elif 'email' in table_user.fields():
+            username = 'email'
+        else:
+            raise SyntaxError, "user must have username or email"
+        passfield = self.settings.password_field
+        user = self.db(table_user[username] == keys[username]).select().first()
+        keys['registration_key']=''
+        if user:
+            user.update_record(**table_user._filter_fields(keys))
+        else:
+            if not 'first_name' in keys and 'first_name' in table_user.fields:
+                keys['first_name'] = keys[username]
+            user_id = table_user.insert(**table_user._filter_fields(keys))
+            user =  self.user = table_user[user_id]
+            if self.settings.create_user_groups:
+                group_id = self.add_group("user_%s" % user_id)
+                self.add_membership(group_id, user_id)
+        return user
+
+    def basic(self):
+        if not self.settings.allow_basic_login:
+            return False
+        basic = current.request.env.http_authorization
+        if not basic or not basic[:6].lower() == 'basic ':
+            return False
+        (username, password) = base64.b64decode(basic[6:]).split(':')
+        return self.login_bare(username, password)
+
+    def login_bare(self, username, password):
+        """
+        logins user
+        """
+
+        request = current.request
+        session = current.session
+        table_user = self.settings.table_user
+        if self.settings.login_userfield:
+            userfield = self.settings.login_userfield
+        elif 'username' in table_user.fields:
+            userfield = 'username'
+        else:
+            userfield = 'email'
+        passfield = self.settings.password_field
+        user = self.db(table_user[userfield] == username).select().first()
+        password = table_user[passfield].validate(password)[0]
+        if user:
+            if not user.registration_key and user[passfield] == password:
+                user = Storage(table_user._filter_fields(user, id=True))
+                session.auth = Storage(user=user, last_visit=request.now,
+                                       expiration=self.settings.expiration,
+                                       hmac_key = web2py_uuid())
+                self.user = user
+                return user
+        return False
+
+    def cas_login(
+        self,
+        next=DEFAULT,
+        onvalidation=DEFAULT,
+        onaccept=DEFAULT,
+        log=DEFAULT,
+        version=2,
+        ):
+        request, session = current.request, current.session
+        db, table = self.db, self.settings.table_cas
+        session._cas_service = request.vars.service or session._cas_service
+        if not request.env.http_host in self.settings.cas_domains or \
+                not session._cas_service:
+            raise HTTP(403,'not authorized')
+        def allow_access():
+            row = table(url=session._cas_service,user_id=self.user.id)
+            if row:
+                row.update_record(created_on=request.now)
+                uuid = row.uuid
+            else:
+                uuid = web2py_uuid()
+                table.insert(url=session._cas_service, user_id=self.user.id,
+                             uuid=uuid, created_on=request.now)
+            url = session._cas_service
+            del session._cas_service
+            redirect(url+"?ticket="+uuid)
+        if self.is_logged_in():
+            allow_access()
+        def cas_onaccept(form, onaccept=onaccept):
+            if onaccept!=DEFAULT: onaccept(form)
+            allow_access()
+        return self.login(next,onvalidation,cas_onaccept,log)
+
+
+    def cas_validate(self,version=2):
+        request = current.request
+        db, table = self.db, self.settings.table_cas
+        current.response.headers['Content-Type']='text'
+        ticket = table(uuid=request.vars.ticket)
+        url = request.env.path_info.rsplit('/',1)[0]
+        if ticket: # and ticket.created_on>request.now-datetime.timedelta(60):
+            user = self.settings.table_user(ticket.user_id)
+            fullname = user.first_name+' '+user.last_name
+            if version==1:
+                raise HTTP(200,'yes\n%s:%s:%s'%(user.id,user.email,fullname))
+            # assume version 2
+            username = user.get('username',user.email)
+            raise HTTP(200,'\n'+\
+                           TAG['cas:serviceResponse'](
+                    TAG['cas:authenticationSuccess'](
+                        TAG['cas:user'](username),
+                        *[TAG['cas:'+field.name](user[field.name]) \
+                              for field in self.settings.table_user \
+                              if field.readable]),
+                    **{'_xmlns:cas':'http://www.yale.edu/tp/cas'}).xml())
+        if version==1:
+            raise HTTP(200,'no\n')
+        # assume version 2
+        raise HTTP(200,'\n'+\
+                       TAG['cas:serviceResponse'](
+                TAG['cas:authenticationFailure'](
+                    'Ticket %s not recognized' % ticket,
+                    _code='INVALID TICKET'),
+                **{'_xmlns:cas':'http://www.yale.edu/tp/cas'}).xml())
+
+
+    def login(
+        self,
+        next=DEFAULT,
+        onvalidation=DEFAULT,
+        onaccept=DEFAULT,
+        log=DEFAULT,
+        ):
+        """
+        returns a login form
+
+        .. method:: Auth.login([next=DEFAULT [, onvalidation=DEFAULT
+            [, onaccept=DEFAULT [, log=DEFAULT]]]])
+
+        """
+
+        table_user = self.settings.table_user
+        if self.settings.login_userfield:
+            username = self.settings.login_userfield
+        elif 'username' in table_user.fields:
+            username = 'username'
+        else:
+            username = 'email'
+        if 'username' in table_user.fields or not self.settings.login_email_validate:
+            tmpvalidator = IS_NOT_EMPTY(error_message=self.messages.is_empty)
+        else:
+            tmpvalidator = IS_EMAIL(error_message=self.messages.invalid_email)
+        old_requires = table_user[username].requires
+        table_user[username].requires = tmpvalidator
+
+        request = current.request
+        response = current.response
+        session = current.session
+
+        passfield = self.settings.password_field
+        if next == DEFAULT:
+            next = request.get_vars._next \
+                or request.post_vars._next \
+                or self.settings.login_next
+        if onvalidation == DEFAULT:
+            onvalidation = self.settings.login_onvalidation
+        if onaccept == DEFAULT:
+            onaccept = self.settings.login_onaccept
+        if log == DEFAULT:
+            log = self.messages.login_log
+
+        user = None # default
+
+        # do we use our own login form, or from a central source?
+        if self.settings.login_form == self:
+            form = SQLFORM(
+                table_user,
+                fields=[username, passfield],
+                hidden=dict(_next=next),
+                showid=self.settings.showid,
+                submit_button=self.messages.login_button,
+                delete_label=self.messages.delete_label,
+                formstyle=self.settings.formstyle,
+                separator=self.settings.label_separator
+                )
+
+            if self.settings.remember_me_form:
+                ## adds a new input checkbox "remember me for longer"
+                addrow(form,XML(" "),
+                       DIV(XML(" "),
+                           INPUT(_type='checkbox',
+                                 _class='checkbox',
+                                 _id="auth_user_remember",
+                                 _name="remember",
+                                 ),
+                           XML("  "),
+                           LABEL(
+                            self.messages.label_remember_me,
+                            _for="auth_user_remember",
+                            )),"",
+                       self.settings.formstyle,
+                       'auth_user_remember__row')
+
+            captcha = self.settings.login_captcha or \
+                (self.settings.login_captcha!=False and self.settings.captcha)
+            if captcha:
+                addrow(form, captcha.label, captcha, captcha.comment, self.settings.formstyle,'captcha__row')
+            accepted_form = False
+
+            if form.accepts(request, session,
+                            formname='login', dbio=False,
+                            onvalidation=onvalidation,
+                            hideerror=self.settings.hideerror):
+
+                accepted_form = True
+                # check for username in db
+                user = self.db(table_user[username] == form.vars[username]).select().first()
+                if user:
+                    # user in db, check if registration pending or disabled
+                    temp_user = user
+                    if temp_user.registration_key == 'pending':
+                        response.flash = self.messages.registration_pending
+                        return form
+                    elif temp_user.registration_key in ('disabled','blocked'):
+                        response.flash = self.messages.login_disabled
+                        return form
+                    elif temp_user.registration_key!=None and \
+                            temp_user.registration_key.strip():
+                        response.flash = \
+                            self.messages.registration_verifying
+                        return form
+                    # try alternate logins 1st as these have the
+                    # current version of the password
+                    user = None
+                    for login_method in self.settings.login_methods:
+                        if login_method != self and \
+                                login_method(request.vars[username],
+                                             request.vars[passfield]):
+                            if not self in self.settings.login_methods:
+                                # do not store password in db
+                                form.vars[passfield] = None
+                            user = self.get_or_create_user(form.vars)
+                            break
+                    if not user:
+                        # alternates have failed, maybe because service inaccessible
+                        if self.settings.login_methods[0] == self:
+                            # try logging in locally using cached credentials
+                            if temp_user[passfield] == form.vars.get(passfield, ''):
+                                # success
+                                user = temp_user
+                else:
+                    # user not in db
+                    if not self.settings.alternate_requires_registration:
+                        # we're allowed to auto-register users from external systems
+                        for login_method in self.settings.login_methods:
+                            if login_method != self and \
+                                    login_method(request.vars[username],
+                                                 request.vars[passfield]):
+                                if not self in self.settings.login_methods:
+                                    # do not store password in db
+                                    form.vars[passfield] = None
+                                user = self.get_or_create_user(form.vars)
+                                break
+                if not user:
+                    if self.settings.login_failed_log:
+                        self.log_event(self.settings.login_failed_log % request.post_vars)
+                    # invalid login
+                    session.flash = self.messages.invalid_login
+                    redirect(self.url(args=request.args,vars=request.get_vars))
+
+        else:
+            # use a central authentication server
+            cas = self.settings.login_form
+            cas_user = cas.get_user()
+
+            if cas_user:
+                cas_user[passfield] = None
+                user = self.get_or_create_user(table_user._filter_fields(cas_user))
+            elif hasattr(cas,'login_form'):
+                return cas.login_form()
+            else:
+                # we need to pass through login again before going on
+                next = self.url('user',args='login',vars=dict(_next=next))
+                redirect(cas.login_url(next))
+
+
+        # process authenticated users
+        if user:
+            user = Storage(table_user._filter_fields(user, id=True))
+
+            if log:
+                self.log_event(log % user)
+
+        # process authenticated users
+            # user wants to be logged in for longer
+            session.auth = Storage(
+                user = user,
+                last_visit = request.now,
+                expiration = self.settings.long_expiration,
+                remember = request.vars.has_key("remember"),
+                hmac_key = web2py_uuid()
+                )
+
+            self.user = user
+            session.flash = self.messages.logged_in
+
+        # how to continue
+        if self.settings.login_form == self:
+            if accepted_form:
+                callback(onaccept,form)
+                if isinstance(next, (list, tuple)):
+                    # fix issue with 2.6
+                    next = next[0]
+                if next and not next[0] == '/' and next[:4] != 'http':
+                    next = self.url(next.replace('[id]', str(form.vars.id)))
+                redirect(next)
+            table_user[username].requires = old_requires
+            return form
+        elif user:
+            callback(onaccept,None)
+        redirect(next)
+
+    def logout(self, next=DEFAULT, onlogout=DEFAULT, log=DEFAULT):
+        """
+        logout and redirects to login
+
+        .. method:: Auth.logout ([next=DEFAULT[, onlogout=DEFAULT[,
+            log=DEFAULT]]])
+
+        """
+
+        if next == DEFAULT:
+            next = self.settings.logout_next
+        if onlogout == DEFAULT:
+            onlogout = self.settings.logout_onlogout
+        if onlogout:
+            onlogout(self.user)
+        if log == DEFAULT:
+            log = self.messages.logout_log
+        if log and self.user:
+            self.log_event(log % self.user)
+
+        if self.settings.login_form != self:
+            cas = self.settings.login_form
+            cas_user = cas.get_user()
+            if cas_user:
+                next = cas.logout_url(next)
+
+        current.session.auth = None
+        current.session.flash = self.messages.logged_out
+        if next:
+            redirect(next)
+
+    def register(
+        self,
+        next=DEFAULT,
+        onvalidation=DEFAULT,
+        onaccept=DEFAULT,
+        log=DEFAULT,
+        ):
+        """
+        returns a registration form
+
+        .. method:: Auth.register([next=DEFAULT [, onvalidation=DEFAULT
+            [, onaccept=DEFAULT [, log=DEFAULT]]]])
+
+        """
+
+        table_user = self.settings.table_user
+        request = current.request
+        response = current.response
+        session = current.session
+        if self.is_logged_in():
+            redirect(self.settings.logged_url)
+        if next == DEFAULT:
+            next = request.get_vars._next \
+                or request.post_vars._next \
+                or self.settings.register_next
+        if onvalidation == DEFAULT:
+            onvalidation = self.settings.register_onvalidation
+        if onaccept == DEFAULT:
+            onaccept = self.settings.register_onaccept
+        if log == DEFAULT:
+            log = self.messages.register_log
+
+        passfield = self.settings.password_field
+        formstyle = self.settings.formstyle
+        form = SQLFORM(table_user,
+                       fields = self.settings.register_fields,
+                       hidden=dict(_next=next),
+                       showid=self.settings.showid,
+                       submit_button=self.messages.register_button,
+                       delete_label=self.messages.delete_label,
+                       formstyle=formstyle,
+                       separator=self.settings.label_separator
+                       )
+        for i, row in enumerate(form[0].components):
+            item = row.element('input',_name=passfield)
+            if item:
+                form.custom.widget.password_two = \
+                    INPUT(_name="password_two",  _type="password",
+                          requires=IS_EXPR('value==%s' % \
+                          repr(request.vars.get(passfield, None)),
+                          error_message=self.messages.mismatched_password))
+
+                addrow(form, self.messages.verify_password + ':',
+                       form.custom.widget.password_two,
+                       self.messages.verify_password_comment,
+                       formstyle,
+                       '%s_%s__row' % (table_user, 'password_two'),
+                       position=i+1)
+                break
+        captcha = self.settings.register_captcha or self.settings.captcha
+        if captcha:
+            addrow(form, captcha.label, captcha, captcha.comment,self.settings.formstyle, 'captcha__row')
+
+        table_user.registration_key.default = key = web2py_uuid()
+        if form.accepts(request, session, formname='register',
+                        onvalidation=onvalidation,hideerror=self.settings.hideerror):
+            description = self.messages.group_description % form.vars
+            if self.settings.create_user_groups:
+                group_id = self.add_group("user_%s" % form.vars.id, description)
+                self.add_membership(group_id, form.vars.id)
+            if self.settings.registration_requires_verification:
+                if not self.settings.mailer or \
+                   not self.settings.mailer.send(to=form.vars.email,
+                        subject=self.messages.verify_email_subject,
+                        message=self.messages.verify_email
+                         % dict(key=key)):
+                    self.db.rollback()
+                    response.flash = self.messages.unable_send_email
+                    return form
+                session.flash = self.messages.email_sent
+            elif self.settings.registration_requires_approval:
+                table_user[form.vars.id] = dict(registration_key='pending')
+                session.flash = self.messages.registration_pending
+            else:
+                table_user[form.vars.id] = dict(registration_key='')
+                session.flash = self.messages.registration_successful
+                table_user = self.settings.table_user
+                if 'username' in table_user.fields:
+                    username = 'username'
+                else:
+                    username = 'email'
+                user = self.db(table_user[username] == form.vars[username]).select().first()
+                user = Storage(table_user._filter_fields(user, id=True))
+                session.auth = Storage(user=user, last_visit=request.now,
+                                       expiration=self.settings.expiration,
+                                       hmac_key = web2py_uuid())
+                self.user = user
+                session.flash = self.messages.logged_in
+            if log:
+                self.log_event(log % form.vars)
+            callback(onaccept,form)
+            if not next:
+                next = self.url(args = request.args)
+            elif isinstance(next, (list, tuple)): ### fix issue with 2.6
+                next = next[0]
+            elif next and not next[0] == '/' and next[:4] != 'http':
+                next = self.url(next.replace('[id]', str(form.vars.id)))
+            redirect(next)
+        return form
+
+    def is_logged_in(self):
+        """
+        checks if the user is logged in and returns True/False.
+        if so user is in auth.user as well as in session.auth.user
+        """
+
+        if self.user:
+            return True
+        return False
+
+    def verify_email(
+        self,
+        next=DEFAULT,
+        onaccept=DEFAULT,
+        log=DEFAULT,
+        ):
+        """
+        action user to verify the registration email, XXXXXXXXXXXXXXXX
+
+        .. method:: Auth.verify_email([next=DEFAULT [, onvalidation=DEFAULT
+            [, onaccept=DEFAULT [, log=DEFAULT]]]])
+
+        """
+
+        key = current.request.args[-1]
+        table_user = self.settings.table_user
+        user = self.db(table_user.registration_key == key).select().first()
+        if not user:
+            redirect(self.settings.login_url)
+        if self.settings.registration_requires_approval:
+            user.update_record(registration_key = 'pending')
+            current.session.flash = self.messages.registration_pending
+        else:
+            user.update_record(registration_key = '')
+            current.session.flash = self.messages.email_verified
+        if log == DEFAULT:
+            log = self.messages.verify_email_log
+        if next == DEFAULT:
+            next = self.settings.verify_email_next
+        if onaccept == DEFAULT:
+            onaccept = self.settings.verify_email_onaccept
+        if log:
+            self.log_event(log % user)
+        callback(onaccept,user)
+        redirect(next)
+
+    def retrieve_username(
+        self,
+        next=DEFAULT,
+        onvalidation=DEFAULT,
+        onaccept=DEFAULT,
+        log=DEFAULT,
+        ):
+        """
+        returns a form to retrieve the user username
+        (only if there is a username field)
+
+        .. method:: Auth.retrieve_username([next=DEFAULT
+            [, onvalidation=DEFAULT [, onaccept=DEFAULT [, log=DEFAULT]]]])
+
+        """
+
+        table_user = self.settings.table_user
+        if not 'username' in table_user.fields:
+            raise HTTP(404)
+        request = current.request
+        response = current.response
+        session = current.session
+        captcha = self.settings.retrieve_username_captcha or \
+                (self.settings.retrieve_username_captcha!=False and self.settings.captcha)
+        if not self.settings.mailer:
+            response.flash = self.messages.function_disabled
+            return ''
+        if next == DEFAULT:
+            next = request.get_vars._next \
+                or request.post_vars._next \
+                or self.settings.retrieve_username_next
+        if onvalidation == DEFAULT:
+            onvalidation = self.settings.retrieve_username_onvalidation
+        if onaccept == DEFAULT:
+            onaccept = self.settings.retrieve_username_onaccept
+        if log == DEFAULT:
+            log = self.messages.retrieve_username_log
+        old_requires = table_user.email.requires
+        table_user.email.requires = [IS_IN_DB(self.db, table_user.email,
+            error_message=self.messages.invalid_email)]
+        form = SQLFORM(table_user,
+                       fields=['email'],
+                       hidden=dict(_next=next),
+                       showid=self.settings.showid,
+                       submit_button=self.messages.submit_button,
+                       delete_label=self.messages.delete_label,
+                       formstyle=self.settings.formstyle,
+                       separator=self.settings.label_separator
+                       )
+        if captcha:
+            addrow(form, captcha.label, captcha, captcha.comment,self.settings.formstyle, 'captcha__row')
+
+        if form.accepts(request, session,
+                        formname='retrieve_username', dbio=False,
+                        onvalidation=onvalidation,hideerror=self.settings.hideerror):
+            user = self.db(table_user.email == form.vars.email).select().first()
+            if not user:
+                current.session.flash = \
+                    self.messages.invalid_email
+                redirect(self.url(args=request.args))
+            username = user.username
+            self.settings.mailer.send(to=form.vars.email,
+                    subject=self.messages.retrieve_username_subject,
+                    message=self.messages.retrieve_username
+                     % dict(username=username))
+            session.flash = self.messages.email_sent
+            if log:
+                self.log_event(log % user)
+            callback(onaccept,form)
+            if not next:
+                next = self.url(args = request.args)
+            elif isinstance(next, (list, tuple)): ### fix issue with 2.6
+                next = next[0]
+            elif next and not next[0] == '/' and next[:4] != 'http':
+                next = self.url(next.replace('[id]', str(form.vars.id)))
+            redirect(next)
+        table_user.email.requires = old_requires
+        return form
+
+    def random_password(self):
+        import string
+        import random
+        password = ''
+        specials=r'!#$*'
+        for i in range(0,3):
+            password += random.choice(string.lowercase)
+            password += random.choice(string.uppercase)
+            password += random.choice(string.digits)
+            password += random.choice(specials)
+        return ''.join(random.sample(password,len(password)))
+
+    def reset_password_deprecated(
+        self,
+        next=DEFAULT,
+        onvalidation=DEFAULT,
+        onaccept=DEFAULT,
+        log=DEFAULT,
+        ):
+        """
+        returns a form to reset the user password (deprecated)
+
+        .. method:: Auth.reset_password_deprecated([next=DEFAULT
+            [, onvalidation=DEFAULT [, onaccept=DEFAULT [, log=DEFAULT]]]])
+
+        """
+
+        table_user = self.settings.table_user
+        request = current.request
+        response = current.response
+        session = current.session
+        if not self.settings.mailer:
+            response.flash = self.messages.function_disabled
+            return ''
+        if next == DEFAULT:
+            next = request.get_vars._next \
+                or request.post_vars._next \
+                or self.settings.retrieve_password_next
+        if onvalidation == DEFAULT:
+            onvalidation = self.settings.retrieve_password_onvalidation
+        if onaccept == DEFAULT:
+            onaccept = self.settings.retrieve_password_onaccept
+        if log == DEFAULT:
+            log = self.messages.retrieve_password_log
+        old_requires = table_user.email.requires
+        table_user.email.requires = [IS_IN_DB(self.db, table_user.email,
+            error_message=self.messages.invalid_email)]
+        form = SQLFORM(table_user,
+                       fields=['email'],
+                       hidden=dict(_next=next),
+                       showid=self.settings.showid,
+                       submit_button=self.messages.submit_button,
+                       delete_label=self.messages.delete_label,
+                       formstyle=self.settings.formstyle,
+                       separator=self.settings.label_separator
+                       )
+        if form.accepts(request, session,
+                        formname='retrieve_password', dbio=False,
+                        onvalidation=onvalidation,hideerror=self.settings.hideerror):
+            user = self.db(table_user.email == form.vars.email).select().first()
+            if not user:
+                current.session.flash = \
+                    self.messages.invalid_email
+                redirect(self.url(args=request.args))
+            elif user.registration_key in ('pending','disabled','blocked'):
+                current.session.flash = \
+                    self.messages.registration_pending
+                redirect(self.url(args=request.args))
+            password = self.random_password()
+            passfield = self.settings.password_field
+            d = {passfield: table_user[passfield].validate(password)[0],
+                 'registration_key': ''}
+            user.update_record(**d)
+            if self.settings.mailer and \
+               self.settings.mailer.send(to=form.vars.email,
+                        subject=self.messages.retrieve_password_subject,
+                        message=self.messages.retrieve_password \
+                        % dict(password=password)):
+                session.flash = self.messages.email_sent
+            else:
+                session.flash = self.messages.unable_to_send_email
+            if log:
+                self.log_event(log % user)
+            callback(onaccept,form)
+            if not next:
+                next = self.url(args = request.args)
+            elif isinstance(next, (list, tuple)): ### fix issue with 2.6
+                next = next[0]
+            elif next and not next[0] == '/' and next[:4] != 'http':
+                next = self.url(next.replace('[id]', str(form.vars.id)))
+            redirect(next)
+        table_user.email.requires = old_requires
+        return form
+
+    def reset_password(
+        self,
+        next=DEFAULT,
+        onvalidation=DEFAULT,
+        onaccept=DEFAULT,
+        log=DEFAULT,
+        ):
+        """
+        returns a form to reset the user password
+
+        .. method:: Auth.reset_password([next=DEFAULT
+            [, onvalidation=DEFAULT [, onaccept=DEFAULT [, log=DEFAULT]]]])
+
+        """
+
+        table_user = self.settings.table_user
+        request = current.request
+        # response = current.response
+        session = current.session
+
+        if next == DEFAULT:
+            next = request.get_vars._next \
+                or request.post_vars._next \
+                or self.settings.reset_password_next
+
+        try:
+            key = request.vars.key or request.args[-1]
+            t0 = int(key.split('-')[0])
+            if time.time()-t0 > 60*60*24: raise Exception
+            user = self.db(table_user.reset_password_key == key).select().first()
+            if not user: raise Exception
+        except Exception:
+            session.flash = self.messages.invalid_reset_password
+            redirect(next)
+        passfield = self.settings.password_field
+        form = SQLFORM.factory(
+            Field('new_password', 'password',
+                  label=self.messages.new_password,
+                  requires=self.settings.table_user[passfield].requires),
+            Field('new_password2', 'password',
+                  label=self.messages.verify_password,
+                  requires=[IS_EXPR('value==%s' % repr(request.vars.new_password),
+                                    self.messages.mismatched_password)]),
+            submit_button=self.messages.password_reset_button,
+            formstyle=self.settings.formstyle,
+            separator=self.settings.label_separator
+        )
+        if form.accepts(request,session,hideerror=self.settings.hideerror):
+            user.update_record(**{passfield:form.vars.new_password,
+                                  'registration_key':'',
+                                  'reset_password_key':''})
+            session.flash = self.messages.password_changed
+            redirect(next)
+        return form
+
+    def request_reset_password(
+        self,
+        next=DEFAULT,
+        onvalidation=DEFAULT,
+        onaccept=DEFAULT,
+        log=DEFAULT,
+        ):
+        """
+        returns a form to reset the user password
+
+        .. method:: Auth.reset_password([next=DEFAULT
+            [, onvalidation=DEFAULT [, onaccept=DEFAULT [, log=DEFAULT]]]])
+
+        """
+
+        table_user = self.settings.table_user
+        request = current.request
+        response = current.response
+        session = current.session
+        captcha = self.settings.retrieve_password_captcha or \
+                (self.settings.retrieve_password_captcha!=False and self.settings.captcha)
+
+        if next == DEFAULT:
+            next = request.get_vars._next \
+                or request.post_vars._next \
+                or self.settings.request_reset_password_next
+
+        if not self.settings.mailer:
+            response.flash = self.messages.function_disabled
+            return ''
+        if onvalidation == DEFAULT:
+            onvalidation = self.settings.reset_password_onvalidation
+        if onaccept == DEFAULT:
+            onaccept = self.settings.reset_password_onaccept
+        if log == DEFAULT:
+            log = self.messages.reset_password_log
+        # old_requires = table_user.email.requires <<< perhaps should be restored
+        table_user.email.requires = [
+            IS_EMAIL(error_message=self.messages.invalid_email),
+            IS_IN_DB(self.db, table_user.email,
+                     error_message=self.messages.invalid_email)]
+        form = SQLFORM(table_user,
+                       fields=['email'],
+                       hidden=dict(_next=next),
+                       showid=self.settings.showid,
+                       submit_button=self.messages.password_reset_button,
+                       delete_label=self.messages.delete_label,
+                       formstyle=self.settings.formstyle,
+                       separator=self.settings.label_separator
+                       )
+        if captcha:
+            addrow(form, captcha.label, captcha, captcha.comment, self.settings.formstyle,'captcha__row')
+        if form.accepts(request, session,
+                        formname='reset_password', dbio=False,
+                        onvalidation=onvalidation,
+                        hideerror=self.settings.hideerror):
+            user = self.db(table_user.email == form.vars.email).select().first()
+            if not user:
+                session.flash = self.messages.invalid_email
+                redirect(self.url(args=request.args))
+            elif user.registration_key in ('pending','disabled','blocked'):
+                session.flash = self.messages.registration_pending
+                redirect(self.url(args=request.args))
+            reset_password_key = str(int(time.time()))+'-' + web2py_uuid()
+
+            if self.settings.mailer.send(to=form.vars.email,
+                                         subject=self.messages.reset_password_subject,
+                                         message=self.messages.reset_password % \
+                                             dict(key=reset_password_key)):
+                session.flash = self.messages.email_sent
+                user.update_record(reset_password_key=reset_password_key)
+            else:
+                session.flash = self.messages.unable_to_send_email
+            if log:
+                self.log_event(log % user)
+            callback(onaccept,form)
+            if not next:
+                next = self.url(args = request.args)
+            elif isinstance(next, (list, tuple)): ### fix issue with 2.6
+                next = next[0]
+            elif next and not next[0] == '/' and next[:4] != 'http':
+                next = self.url(next.replace('[id]', str(form.vars.id)))
+            redirect(next)
+        # old_requires = table_user.email.requires
+        return form
+
+    def retrieve_password(
+        self,
+        next=DEFAULT,
+        onvalidation=DEFAULT,
+        onaccept=DEFAULT,
+        log=DEFAULT,
+        ):
+        if self.settings.reset_password_requires_verification:
+            return self.request_reset_password(next,onvalidation,onaccept,log)
+        else:
+            return self.reset_password_deprecated(next,onvalidation,onaccept,log)
+
+    def change_password(
+        self,
+        next=DEFAULT,
+        onvalidation=DEFAULT,
+        onaccept=DEFAULT,
+        log=DEFAULT,
+        ):
+        """
+        returns a form that lets the user change password
+
+        .. method:: Auth.change_password([next=DEFAULT[, onvalidation=DEFAULT[,
+            onaccept=DEFAULT[, log=DEFAULT]]]])
+        """
+
+        if not self.is_logged_in():
+            redirect(self.settings.login_url)
+        db = self.db
+        table_user = self.settings.table_user
+        usern = self.settings.table_user_name
+        s = db(table_user.id == self.user.id)
+
+        request = current.request
+        session = current.session
+        if next == DEFAULT:
+            next = request.get_vars._next \
+                or request.post_vars._next \
+                or self.settings.change_password_next
+        if onvalidation == DEFAULT:
+            onvalidation = self.settings.change_password_onvalidation
+        if onaccept == DEFAULT:
+            onaccept = self.settings.change_password_onaccept
+        if log == DEFAULT:
+            log = self.messages.change_password_log
+        passfield = self.settings.password_field
+        form = SQLFORM.factory(
+            Field('old_password', 'password',
+                label=self.messages.old_password,
+                requires=validators(
+                     table_user[passfield].requires,
+                     IS_IN_DB(s, '%s.%s' % (usern, passfield),
+                              error_message=self.messages.invalid_password))),
+            Field('new_password', 'password',
+                label=self.messages.new_password,
+                requires=table_user[passfield].requires),
+            Field('new_password2', 'password',
+                label=self.messages.verify_password,
+                requires=[IS_EXPR('value==%s' % repr(request.vars.new_password),
+                              self.messages.mismatched_password)]),
+            submit_button=self.messages.password_change_button,
+            formstyle = self.settings.formstyle,
+            separator=self.settings.label_separator
+        )
+        if form.accepts(request, session,
+                        formname='change_password',
+                        onvalidation=onvalidation,
+                        hideerror=self.settings.hideerror):
+            d = {passfield: form.vars.new_password}
+            s.update(**d)
+            session.flash = self.messages.password_changed
+            if log:
+                self.log_event(log % self.user)
+            callback(onaccept,form)
+            if not next:
+                next = self.url(args=request.args)
+            elif isinstance(next, (list, tuple)): ### fix issue with 2.6
+                next = next[0]
+            elif next and not next[0] == '/' and next[:4] != 'http':
+                next = self.url(next.replace('[id]', str(form.vars.id)))
+            redirect(next)
+        return form
+
+    def profile(
+        self,
+        next=DEFAULT,
+        onvalidation=DEFAULT,
+        onaccept=DEFAULT,
+        log=DEFAULT,
+        ):
+        """
+        returns a form that lets the user change his/her profile
+
+        .. method:: Auth.profile([next=DEFAULT [, onvalidation=DEFAULT
+            [, onaccept=DEFAULT [, log=DEFAULT]]]])
+
+        """
+
+        table_user = self.settings.table_user
+        if not self.is_logged_in():
+            redirect(self.settings.login_url)
+        passfield = self.settings.password_field
+        self.settings.table_user[passfield].writable = False
+        request = current.request
+        session = current.session
+        if next == DEFAULT:
+            next = request.get_vars._next \
+                or request.post_vars._next \
+                or self.settings.profile_next
+        if onvalidation == DEFAULT:
+            onvalidation = self.settings.profile_onvalidation
+        if onaccept == DEFAULT:
+            onaccept = self.settings.profile_onaccept
+        if log == DEFAULT:
+            log = self.messages.profile_log
+        form = SQLFORM(
+            table_user,
+            self.user.id,
+            fields = self.settings.profile_fields,
+            hidden = dict(_next=next),
+            showid = self.settings.showid,
+            submit_button = self.messages.profile_save_button,
+            delete_label = self.messages.delete_label,
+            upload = self.settings.download_url,
+            formstyle = self.settings.formstyle,
+            separator=self.settings.label_separator
+            )
+        if form.accepts(request, session,
+                        formname='profile',
+                        onvalidation=onvalidation,hideerror=self.settings.hideerror):
+            self.user.update(table_user._filter_fields(form.vars))
+            session.flash = self.messages.profile_updated
+            if log:
+                self.log_event(log % self.user)
+            callback(onaccept,form)
+            if not next:
+                next = self.url(args=request.args)
+            elif isinstance(next, (list, tuple)): ### fix issue with 2.6
+                next = next[0]
+            elif next and not next[0] == '/' and next[:4] != 'http':
+                next = self.url(next.replace('[id]', str(form.vars.id)))
+            redirect(next)
+        return form
+
+    def is_impersonating(self):
+        return current.session.auth.impersonator
+
+    def impersonate(self, user_id=DEFAULT):
+        """
+        usage: POST TO http://..../impersonate request.post_vars.user_id=
+        set request.post_vars.user_id to 0 to restore original user.
+
+        requires impersonator is logged in and
+        has_permission('impersonate', 'auth_user', user_id)
+        """
+        request = current.request
+        session = current.session
+        auth = session.auth
+        if not self.is_logged_in():
+            raise HTTP(401, "Not Authorized")
+        current_id = auth.user.id
+        requested_id = user_id
+        if user_id == DEFAULT:
+            user_id = current.request.post_vars.user_id
+        if user_id and user_id != self.user.id and user_id != '0':
+            if not self.has_permission('impersonate',
+                                       self.settings.table_user_name,
+                                       user_id):
+                raise HTTP(403, "Forbidden")
+            user = self.settings.table_user(user_id)
+            if not user:
+                raise HTTP(401, "Not Authorized")
+            auth.impersonator = cPickle.dumps(session)
+            auth.user.update(
+                self.settings.table_user._filter_fields(user, True))
+            self.user = auth.user
+            if self.settings.login_onaccept:
+                form = Storage(dict(vars=self.user))
+                self.settings.login_onaccept(form)
+            log = self.messages.impersonate_log
+            if log:
+                self.log_event(log % dict(id=current_id,other_id=auth.user.id))
+        elif user_id in (0, '0') and self.is_impersonating():
+            session.clear()
+            session.update(cPickle.loads(auth.impersonator))
+            self.user = session.auth.user
+        if requested_id == DEFAULT and not request.post_vars:
+            return SQLFORM.factory(Field('user_id','integer'))
+        return self.user
+
+    def groups(self):
+        """
+        displays the groups and their roles for the logged in user
+        """
+
+        if not self.is_logged_in():
+            redirect(self.settings.login_url)
+        memberships = self.db(self.settings.table_membership.user_id
+                               == self.user.id).select()
+        table = TABLE()
+        for membership in memberships:
+            groups = self.db(self.settings.table_group.id
+                              == membership.group_id).select()
+            if groups:
+                group = groups[0]
+                table.append(TR(H3(group.role, '(%s)' % group.id)))
+                table.append(TR(P(group.description)))
+        if not memberships:
+            return None
+        return table
+
+    def not_authorized(self):
+        """
+        you can change the view for this page to make it look as you like
+        """
+
+        return 'ACCESS DENIED'
+
+    def requires(self, condition):
+        """
+        decorator that prevents access to action if not logged in
+        """
+
+        def decorator(action):
+
+            def f(*a, **b):
+
+                if self.settings.allow_basic_login_only and not self.basic():
+                    if current.request.is_restful:
+                        raise HTTP(403,"Not authorized")
+                    return call_or_redirect(self.settings.on_failed_authorization)
+
+                if not condition:
+                    if current.request.is_restful:
+                        raise HTTP(403,"Not authorized")
+                    if not self.basic() and not self.is_logged_in():
+                        request = current.request
+                        next = URL(r=request,args=request.args,
+                                   vars=request.get_vars)
+                        current.session.flash = current.response.flash
+                        return call_or_redirect(
+                            self.settings.on_failed_authentication,
+                            self.settings.login_url + '?_next='+urllib.quote(next))
+                    else:
+                        current.session.flash = self.messages.access_denied
+                        return call_or_redirect(self.settings.on_failed_authorization)
+                return action(*a, **b)
+            f.__doc__ = action.__doc__
+            f.__name__ = action.__name__
+            f.__dict__.update(action.__dict__)
+            return f
+
+        return decorator
+
+    def requires_login(self):
+        """
+        decorator that prevents access to action if not logged in
+        """
+
+        def decorator(action):
+
+            def f(*a, **b):
+
+                if self.settings.allow_basic_login_only and not self.basic():
+                    if current.request.is_restful:
+                        raise HTTP(403,"Not authorized")
+                    return call_or_redirect(self.settings.on_failed_authorization)
+
+                if not self.basic() and not self.is_logged_in():
+                    if current.request.is_restful:
+                        raise HTTP(403,"Not authorized")
+                    request = current.request
+                    next = URL(r=request,args=request.args,
+                               vars=request.get_vars)
+                    current.session.flash = current.response.flash
+                    return call_or_redirect(
+                        self.settings.on_failed_authentication,
+                        self.settings.login_url + '?_next='+urllib.quote(next)
+                        )
+                return action(*a, **b)
+            f.__doc__ = action.__doc__
+            f.__name__ = action.__name__
+            f.__dict__.update(action.__dict__)
+            return f
+
+        return decorator
+
+    def requires_membership(self, role=None, group_id=None):
+        """
+        decorator that prevents access to action if not logged in or
+        if user logged in is not a member of group_id.
+        If role is provided instead of group_id then the
+        group_id is calculated.
+        """
+
+        def decorator(action):
+            def f(*a, **b):
+                if self.settings.allow_basic_login_only and not self.basic():
+                    if current.request.is_restful:
+                        raise HTTP(403,"Not authorized")
+                    return call_or_redirect(self.settings.on_failed_authorization)
+
+                if not self.basic() and not self.is_logged_in():
+                    if current.request.is_restful:
+                        raise HTTP(403,"Not authorized")
+                    request = current.request
+                    next = URL(r=request,args=request.args,
+                               vars=request.get_vars)
+                    current.session.flash = current.response.flash
+                    return call_or_redirect(
+                        self.settings.on_failed_authentication,
+                        self.settings.login_url + '?_next='+urllib.quote(next)
+                        )
+                if not self.has_membership(group_id=group_id, role=role):
+                    current.session.flash = self.messages.access_denied
+                    return call_or_redirect(self.settings.on_failed_authorization)
+                return action(*a, **b)
+            f.__doc__ = action.__doc__
+            f.__name__ = action.__name__
+            f.__dict__.update(action.__dict__)
+            return f
+
+        return decorator
+
+
+    def requires_permission(
+        self,
+        name,
+        table_name='',
+        record_id=0,
+        ):
+        """
+        decorator that prevents access to action if not logged in or
+        if user logged in is not a member of any group (role) that
+        has 'name' access to 'table_name', 'record_id'.
+        """
+
+        def decorator(action):
+
+            def f(*a, **b):
+                if self.settings.allow_basic_login_only and not self.basic():
+                    if current.request.is_restful:
+                        raise HTTP(403,"Not authorized")
+                    return call_or_redirect(self.settings.on_failed_authorization)
+
+                if not self.basic() and not self.is_logged_in():
+                    if current.request.is_restful:
+                        raise HTTP(403,"Not authorized")
+                    request = current.request
+                    next = URL(r=request,args=request.args,
+                               vars=request.get_vars)
+                    current.session.flash = current.response.flash
+                    return call_or_redirect(
+                        self.settings.on_failed_authentication,
+                        self.settings.login_url + '?_next='+urllib.quote(next)
+                        )
+                if not self.has_permission(name, table_name, record_id):
+                    current.session.flash = self.messages.access_denied
+                    return call_or_redirect(self.settings.on_failed_authorization)
+                return action(*a, **b)
+            f.__doc__ = action.__doc__
+            f.__name__ = action.__name__
+            f.__dict__.update(action.__dict__)
+            return f
+
+        return decorator
+
+    def requires_signature(self):
+        """
+        decorator that prevents access to action if not logged in or
+        if user logged in is not a member of group_id.
+        If role is provided instead of group_id then the
+        group_id is calculated.
+        """
+
+        def decorator(action):
+            def f(*a, **b):
+                if self.settings.allow_basic_login_only and not self.basic():
+                    if current.request.is_restful:
+                        raise HTTP(403,"Not authorized")
+                    return call_or_redirect(self.settings.on_failed_authorization)
+
+                if not self.basic() and not self.is_logged_in():
+                    if current.request.is_restful:
+                        raise HTTP(403,"Not authorized")
+                    request = current.request
+                    next = URL(r=request,args=request.args,
+                               vars=request.get_vars)
+                    current.session.flash = current.response.flash
+                    return call_or_redirect(
+                        self.settings.on_failed_authentication,
+                        self.settings.login_url + '?_next='+urllib.quote(next)
+                        )
+                if not URL.verify(current.request,user_signature=True):
+                    current.session.flash = self.messages.access_denied
+                    return call_or_redirect(self.settings.on_failed_authorization)
+                return action(*a, **b)
+            f.__doc__ = action.__doc__
+            f.__name__ = action.__name__
+            f.__dict__.update(action.__dict__)
+            return f
+
+        return decorator
+
+    def add_group(self, role, description=''):
+        """
+        creates a group associated to a role
+        """
+
+        group_id = self.settings.table_group.insert(role=role,
+                description=description)
+        log = self.messages.add_group_log
+        if log:
+            self.log_event(log % dict(group_id=group_id, role=role))
+        return group_id
+
+    def del_group(self, group_id):
+        """
+        deletes a group
+        """
+
+        self.db(self.settings.table_group.id == group_id).delete()
+        self.db(self.settings.table_membership.group_id
+                 == group_id).delete()
+        self.db(self.settings.table_permission.group_id
+                 == group_id).delete()
+        log = self.messages.del_group_log
+        if log:
+            self.log_event(log % dict(group_id=group_id))
+
+    def id_group(self, role):
+        """
+        returns the group_id of the group specified by the role
+        """
+        rows = self.db(self.settings.table_group.role == role).select()
+        if not rows:
+            return None
+        return rows[0].id
+
+    def user_group(self, user_id = None):
+        """
+        returns the group_id of the group uniquely associated to this user
+        i.e. role=user:[user_id]
+        """
+        if not user_id and self.user:
+            user_id = self.user.id
+        role = 'user_%s' % user_id
+        return self.id_group(role)
+
+    def has_membership(self, group_id=None, user_id=None, role=None):
+        """
+        checks if user is member of group_id or role
+        """
+
+        group_id = group_id or self.id_group(role)
+        try:
+            group_id = int(group_id)
+        except:
+            group_id = self.id_group(group_id) # interpret group_id as a role
+        if not user_id and self.user:
+            user_id = self.user.id
+        membership = self.settings.table_membership
+        if self.db((membership.user_id == user_id)
+                    & (membership.group_id == group_id)).select():
+            r = True
+        else:
+            r = False
+        log = self.messages.has_membership_log
+        if log:
+            self.log_event(log % dict(user_id=user_id,
+                                      group_id=group_id, check=r))
+        return r
+
+    def add_membership(self, group_id=None, user_id=None, role=None):
+        """
+        gives user_id membership of group_id or role
+        if user_id==None than user_id is that of current logged in user
+        """
+
+        group_id = group_id or self.id_group(role)
+        try:
+            group_id = int(group_id)
+        except:
+            group_id = self.id_group(group_id) # interpret group_id as a role
+        if not user_id and self.user:
+            user_id = self.user.id
+        membership = self.settings.table_membership
+        record = membership(user_id = user_id,group_id = group_id)
+        if record:
+            return record.id
+        else:
+            id = membership.insert(group_id=group_id, user_id=user_id)
+        log = self.messages.add_membership_log
+        if log:
+            self.log_event(log % dict(user_id=user_id,
+                                      group_id=group_id))
+        return id
+
+    def del_membership(self, group_id, user_id=None, role=None):
+        """
+        revokes membership from group_id to user_id
+        if user_id==None than user_id is that of current logged in user
+        """
+
+        group_id = group_id or self.id_group(role)
+        if not user_id and self.user:
+            user_id = self.user.id
+        membership = self.settings.table_membership
+        log = self.messages.del_membership_log
+        if log:
+            self.log_event(log % dict(user_id=user_id,
+                                      group_id=group_id))
+        return self.db(membership.user_id
+                       == user_id)(membership.group_id
+                                   == group_id).delete()
+
+    def has_permission(
+        self,
+        name='any',
+        table_name='',
+        record_id=0,
+        user_id=None,
+        group_id=None,
+        ):
+        """
+        checks if user_id or current logged in user is member of a group
+        that has 'name' permission on 'table_name' and 'record_id'
+        if group_id is passed, it checks whether the group has the permission
+        """
+
+        if not user_id and not group_id and self.user:
+            user_id = self.user.id
+        if user_id:
+            membership = self.settings.table_membership
+            rows = self.db(membership.user_id
+                           == user_id).select(membership.group_id)
+            groups = set([row.group_id for row in rows])
+            if group_id and not group_id in groups:
+                return False
+        else:
+            groups = set([group_id])
+        permission = self.settings.table_permission
+        rows = self.db(permission.name == name)(permission.table_name
+                 == str(table_name))(permission.record_id
+                 == record_id).select(permission.group_id)
+        groups_required = set([row.group_id for row in rows])
+        if record_id:
+            rows = self.db(permission.name
+                            == name)(permission.table_name
+                     == str(table_name))(permission.record_id
+                     == 0).select(permission.group_id)
+            groups_required = groups_required.union(set([row.group_id
+                    for row in rows]))
+        if groups.intersection(groups_required):
+            r = True
+        else:
+            r = False
+        log = self.messages.has_permission_log
+        if log and user_id:
+            self.log_event(log % dict(user_id=user_id, name=name,
+                           table_name=table_name, record_id=record_id))
+        return r
+
+    def add_permission(
+        self,
+        group_id,
+        name='any',
+        table_name='',
+        record_id=0,
+        ):
+        """
+        gives group_id 'name' access to 'table_name' and 'record_id'
+        """
+
+        permission = self.settings.table_permission
+        if group_id == 0:
+            group_id = self.user_group()
+        id = permission.insert(group_id=group_id, name=name,
+                               table_name=str(table_name),
+                               record_id=long(record_id))
+        log = self.messages.add_permission_log
+        if log:
+            self.log_event(log % dict(permission_id=id, group_id=group_id,
+                           name=name, table_name=table_name,
+                           record_id=record_id))
+        return id
+
+    def del_permission(
+        self,
+        group_id,
+        name='any',
+        table_name='',
+        record_id=0,
+        ):
+        """
+        revokes group_id 'name' access to 'table_name' and 'record_id'
+        """
+
+        permission = self.settings.table_permission
+        log = self.messages.del_permission_log
+        if log:
+            self.log_event(log % dict(group_id=group_id, name=name,
+                           table_name=table_name, record_id=record_id))
+        return self.db(permission.group_id == group_id)(permission.name
+                 == name)(permission.table_name
+                           == str(table_name))(permission.record_id
+                 == long(record_id)).delete()
+
+    def accessible_query(self, name, table, user_id=None):
+        """
+        returns a query with all accessible records for user_id or
+        the current logged in user
+        this method does not work on GAE because uses JOIN and IN
+
+        example::
+
+           db(auth.accessible_query('read', db.mytable)).select(db.mytable.ALL)
+
+        """
+        if not user_id:
+            user_id = self.user.id
+        if self.has_permission(name, table, 0, user_id):
+            return table.id > 0
+        db = self.db
+        membership = self.settings.table_membership
+        permission = self.settings.table_permission
+        return table.id.belongs(db(membership.user_id == user_id)\
+                           (membership.group_id == permission.group_id)\
+                           (permission.name == name)\
+                           (permission.table_name == table)\
+                           ._select(permission.record_id))
+
+
+class Crud(object):
+
+    def url(self, f=None, args=[], vars={}):
+        """
+        this should point to the controller that exposes
+        download and crud
+        """
+        return URL(c=self.settings.controller,f=f,args=args,vars=vars)
+
+    def __init__(self, environment, db=None, controller='default'):
+        self.db = db
+        if not db and environment and isinstance(environment,DAL):
+            self.db = environment
+        elif not db:
+            raise SyntaxError, "must pass db as first or second argument"
+        self.environment = current
+        settings = self.settings = Settings()
+        settings.auth = None
+        settings.logger = None
+
+        settings.create_next = None
+        settings.update_next = None
+        settings.controller = controller
+        settings.delete_next = self.url()
+        settings.download_url = self.url('download')
+        settings.create_onvalidation = StorageList()
+        settings.update_onvalidation = StorageList()
+        settings.delete_onvalidation = StorageList()
+        settings.create_onaccept = StorageList()
+        settings.update_onaccept = StorageList()
+        settings.update_ondelete = StorageList()
+        settings.delete_onaccept = StorageList()
+        settings.update_deletable = True
+        settings.showid = False
+        settings.keepvalues = False
+        settings.create_captcha = None
+        settings.update_captcha = None
+        settings.captcha = None
+        settings.formstyle = 'table3cols'
+        settings.label_separator = ': '
+        settings.hideerror = False
+        settings.detect_record_change = True
+        settings.hmac_key = None
+        settings.lock_keys = True
+
+        messages = self.messages = Messages(current.T)
+        messages.submit_button = 'Submit'
+        messages.delete_label = 'Check to delete:'
+        messages.record_created = 'Record Created'
+        messages.record_updated = 'Record Updated'
+        messages.record_deleted = 'Record Deleted'
+
+        messages.update_log = 'Record %(id)s updated'
+        messages.create_log = 'Record %(id)s created'
+        messages.read_log = 'Record %(id)s read'
+        messages.delete_log = 'Record %(id)s deleted'
+
+        messages.lock_keys = True
+
+    def __call__(self):
+        args = current.request.args
+        if len(args) < 1:
+            raise HTTP(404)
+        elif args[0] == 'tables':
+            return self.tables()
+        elif len(args) > 1 and not args(1) in self.db.tables:
+            raise HTTP(404)
+        table = self.db[args(1)]
+        if args[0] == 'create':
+            return self.create(table)
+        elif args[0] == 'select':
+            return self.select(table,linkto=self.url(args='read'))
+        elif args[0] == 'search':
+            form, rows = self.search(table,linkto=self.url(args='read'))
+            return DIV(form,SQLTABLE(rows))
+        elif args[0] == 'read':
+            return self.read(table, args(2))
+        elif args[0] == 'update':
+            return self.update(table, args(2))
+        elif args[0] == 'delete':
+            return self.delete(table, args(2))
+        else:
+            raise HTTP(404)
+
+    def log_event(self, message):
+        if self.settings.logger:
+            self.settings.logger.log_event(message, 'crud')
+
+    def has_permission(self, name, table, record=0):
+        if not self.settings.auth:
+            return True
+        try:
+            record_id = record.id
+        except:
+            record_id = record
+        return self.settings.auth.has_permission(name, str(table), record_id)
+
+    def tables(self):
+        return TABLE(*[TR(A(name,
+                            _href=self.url(args=('select',name)))) \
+                           for name in self.db.tables])
+
+
+    @staticmethod
+    def archive(form,archive_table=None,current_record='current_record'):
+        """
+        If you have a table (db.mytable) that needs full revision history you can just do::
+
+            form=crud.update(db.mytable,myrecord,onaccept=crud.archive)
+
+        crud.archive will define a new table "mytable_archive" and store the
+        previous record in the newly created table including a reference
+        to the current record.
+
+        If you want to access such table you need to define it yourself in a model::
+
+            db.define_table('mytable_archive',
+                Field('current_record',db.mytable),
+                db.mytable)
+
+        Notice such table includes all fields of db.mytable plus one: current_record.
+        crud.archive does not timestamp the stored record unless your original table
+        has a fields like::
+
+            db.define_table(...,
+                Field('saved_on','datetime',
+                     default=request.now,update=request.now,writable=False),
+                Field('saved_by',auth.user,
+                     default=auth.user_id,update=auth.user_id,writable=False),
+
+        there is nothing special about these fields since they are filled before
+        the record is archived.
+
+        If you want to change the archive table name and the name of the reference field
+        you can do, for example::
+
+            db.define_table('myhistory',
+                Field('parent_record',db.mytable),
+                db.mytable)
+
+        and use it as::
+
+            form=crud.update(db.mytable,myrecord,
+                             onaccept=lambda form:crud.archive(form,
+                             archive_table=db.myhistory,
+                             current_record='parent_record'))
+
+        """
+        old_record = form.record
+        if not old_record:
+            return None
+        table = form.table
+        if not archive_table:
+            archive_table_name = '%s_archive' % table
+            if archive_table_name in table._db:
+                archive_table = table._db[archive_table_name]
+            else:
+                archive_table = table._db.define_table(archive_table_name,
+                                                       Field(current_record,table),
+                                                       table)
+        new_record = {current_record:old_record.id}
+        for fieldname in archive_table.fields:
+            if not fieldname in ['id',current_record] and fieldname in old_record:
+                new_record[fieldname]=old_record[fieldname]
+        id = archive_table.insert(**new_record)
+        return id
+
+    def update(
+        self,
+        table,
+        record,
+        next=DEFAULT,
+        onvalidation=DEFAULT,
+        onaccept=DEFAULT,
+        ondelete=DEFAULT,
+        log=DEFAULT,
+        message=DEFAULT,
+        deletable=DEFAULT,
+        formname=DEFAULT,
+        ):
+        """
+        .. method:: Crud.update(table, record, [next=DEFAULT
+            [, onvalidation=DEFAULT [, onaccept=DEFAULT [, log=DEFAULT
+            [, message=DEFAULT[, deletable=DEFAULT]]]]]])
+
+        """
+        if not (isinstance(table, self.db.Table) or table in self.db.tables) \
+                or (isinstance(record, str) and not str(record).isdigit()):
+            raise HTTP(404)
+        if not isinstance(table, self.db.Table):
+            table = self.db[table]
+        try:
+            record_id = record.id
+        except:
+            record_id = record or 0
+        if record_id and not self.has_permission('update', table, record_id):
+            redirect(self.settings.auth.settings.on_failed_authorization)
+        if not record_id \
+                and not self.has_permission('create', table, record_id):
+            redirect(self.settings.auth.settings.on_failed_authorization)
+
+        request = current.request
+        response = current.response
+        session = current.session
+        if request.extension == 'json' and request.vars.json:
+            request.vars.update(simplejson.loads(request.vars.json))
+        if next == DEFAULT:
+            next = request.get_vars._next \
+                or request.post_vars._next \
+                or self.settings.update_next
+        if onvalidation == DEFAULT:
+            onvalidation = self.settings.update_onvalidation
+        if onaccept == DEFAULT:
+            onaccept = self.settings.update_onaccept
+        if ondelete == DEFAULT:
+            ondelete = self.settings.update_ondelete
+        if log == DEFAULT:
+            log = self.messages.update_log
+        if deletable == DEFAULT:
+            deletable = self.settings.update_deletable
+        if message == DEFAULT:
+            message = self.messages.record_updated
+        form = SQLFORM(
+            table,
+            record,
+            hidden=dict(_next=next),
+            showid=self.settings.showid,
+            submit_button=self.messages.submit_button,
+            delete_label=self.messages.delete_label,
+            deletable=deletable,
+            upload=self.settings.download_url,
+            formstyle=self.settings.formstyle,
+            separator=self.settings.label_separator
+            )
+        self.accepted = False
+        self.deleted = False
+        captcha = self.settings.update_captcha or \
+                  self.settings.captcha
+        if record and captcha:
+            addrow(form, captcha.label, captcha, captcha.comment,
+                         self.settings.formstyle,'captcha__row')
+        captcha = self.settings.create_captcha or \
+                  self.settings.captcha
+        if not record and captcha:
+            addrow(form, captcha.label, captcha, captcha.comment,
+                         self.settings.formstyle,'captcha__row')
+        if not request.extension in ('html','load'):
+            (_session, _formname) = (None, None)
+        else:
+            (_session, _formname) = \
+                (session, '%s/%s' % (table._tablename, form.record_id))
+        if formname!=DEFAULT:
+            _formname = formname
+        keepvalues = self.settings.keepvalues
+        if request.vars.delete_this_record:
+            keepvalues = False
+        if isinstance(onvalidation,StorageList):
+            onvalidation=onvalidation.get(table._tablename, [])
+        if form.accepts(request, _session, formname=_formname,
+                        onvalidation=onvalidation, keepvalues=keepvalues,
+                        hideerror=self.settings.hideerror,
+                        detect_record_change = self.settings.detect_record_change):
+            self.accepted = True
+            response.flash = message
+            if log:
+                self.log_event(log % form.vars)
+            if request.vars.delete_this_record:
+                self.deleted = True
+                message = self.messages.record_deleted
+                callback(ondelete,form,table._tablename)
+            response.flash = message
+            callback(onaccept,form,table._tablename)
+            if not request.extension in ('html','load'):
+                raise HTTP(200, 'RECORD CREATED/UPDATED')
+            if isinstance(next, (list, tuple)): ### fix issue with 2.6
+               next = next[0]
+            if next: # Only redirect when explicit
+                if next[0] != '/' and next[:4] != 'http':
+                    next = URL(r=request,
+                               f=next.replace('[id]', str(form.vars.id)))
+                session.flash = response.flash
+                redirect(next)
+        elif not request.extension in ('html','load'):
+            raise HTTP(401)
+        return form
+
+    def create(
+        self,
+        table,
+        next=DEFAULT,
+        onvalidation=DEFAULT,
+        onaccept=DEFAULT,
+        log=DEFAULT,
+        message=DEFAULT,
+        formname=DEFAULT,
+        ):
+        """
+        .. method:: Crud.create(table, [next=DEFAULT [, onvalidation=DEFAULT
+            [, onaccept=DEFAULT [, log=DEFAULT[, message=DEFAULT]]]]])
+        """
+
+        if next == DEFAULT:
+            next = self.settings.create_next
+        if onvalidation == DEFAULT:
+            onvalidation = self.settings.create_onvalidation
+        if onaccept == DEFAULT:
+            onaccept = self.settings.create_onaccept
+        if log == DEFAULT:
+            log = self.messages.create_log
+        if message == DEFAULT:
+            message = self.messages.record_created
+        return self.update(
+            table,
+            None,
+            next=next,
+            onvalidation=onvalidation,
+            onaccept=onaccept,
+            log=log,
+            message=message,
+            deletable=False,
+            formname=formname,
+            )
+
+    def read(self, table, record):
+        if not (isinstance(table, self.db.Table) or table in self.db.tables) \
+                or (isinstance(record, str) and not str(record).isdigit()):
+            raise HTTP(404)
+        if not isinstance(table, self.db.Table):
+            table = self.db[table]
+        if not self.has_permission('read', table, record):
+            redirect(self.settings.auth.settings.on_failed_authorization)
+        form = SQLFORM(
+            table,
+            record,
+            readonly=True,
+            comments=False,
+            upload=self.settings.download_url,
+            showid=self.settings.showid,
+            formstyle=self.settings.formstyle,
+            separator=self.settings.label_separator
+            )
+        if not current.request.extension in ('html','load'):
+            return table._filter_fields(form.record, id=True)
+        return form
+
+    def delete(
+        self,
+        table,
+        record_id,
+        next=DEFAULT,
+        message=DEFAULT,
+        ):
+        """
+        .. method:: Crud.delete(table, record_id, [next=DEFAULT
+            [, message=DEFAULT]])
+        """
+        if not (isinstance(table, self.db.Table) or table in self.db.tables) \
+                or not str(record_id).isdigit():
+            raise HTTP(404)
+        if not isinstance(table, self.db.Table):
+            table = self.db[table]
+        if not self.has_permission('delete', table, record_id):
+            redirect(self.settings.auth.settings.on_failed_authorization)
+        request = current.request
+        session = current.session
+        if next == DEFAULT:
+            next = request.get_vars._next \
+                or request.post_vars._next \
+                or self.settings.delete_next
+        if message == DEFAULT:
+            message = self.messages.record_deleted
+        record = table[record_id]
+        if record:
+            callback(self.settings.delete_onvalidation,record)
+            del table[record_id]
+            callback(self.settings.delete_onaccept,record,table._tablename)
+            session.flash = message
+        if next: # Only redirect when explicit
+            redirect(next)
+
+    def rows(
+        self,
+        table,
+        query=None,
+        fields=None,
+        orderby=None,
+        limitby=None,
+        ):
+        request = current.request
+        if not (isinstance(table, self.db.Table) or table in self.db.tables):
+            raise HTTP(404)
+        if not self.has_permission('select', table):
+            redirect(self.settings.auth.settings.on_failed_authorization)
+        #if record_id and not self.has_permission('select', table):
+        #    redirect(self.settings.auth.settings.on_failed_authorization)
+        if not isinstance(table, self.db.Table):
+            table = self.db[table]
+        if not query:
+            query = table.id > 0
+        if not fields:
+            fields = [field for field in table if field.readable]
+        rows = self.db(query).select(*fields,**dict(orderby=orderby,
+                                                    limitby=limitby))
+        return rows
+
+    def select(
+        self,
+        table,
+        query=None,
+        fields=None,
+        orderby=None,
+        limitby=None,
+        headers={},
+        **attr
+        ):
+        rows = self.rows(table,query,fields,orderby,limitby)
+        if not rows:
+            return None # Nicer than an empty table.
+        if not 'upload' in attr:
+            attr['upload'] = self.url('download')
+        if not current.request.extension in ('html','load'):
+            return rows.as_list()
+        if not headers:
+            if isinstance(table,str):
+                table = self.db[table]
+            headers = dict((str(k),k.label) for k in table)
+        return SQLTABLE(rows,headers=headers,**attr)
+
+    def get_format(self, field):
+        rtable = field._db[field.type[10:]]
+        format = rtable.get('_format', None)
+        if format and isinstance(format, str):
+            return format[2:-2]
+        return field.name
+
+    def get_query(self, field, op, value, refsearch=False):
+        try:
+            if refsearch: format = self.get_format(field)
+            if op == 'equals':
+                if not refsearch:
+                    return field == value
+                else:
+                    return lambda row: row[field.name][format] == value
+            elif op == 'not equal':
+                if not refsearch:
+                    return field != value
+                else:
+                    return lambda row: row[field.name][format] != value
+            elif op == 'greater than':
+                if not refsearch:
+                    return field > value
+                else:
+                    return lambda row: row[field.name][format] > value
+            elif op == 'less than':
+                if not refsearch:
+                    return field < value
+                else:
+                    return lambda row: row[field.name][format] < value
+            elif op == 'starts with':
+                if not refsearch:
+                    return field.like(value+'%')
+                else:
+                    return lambda row: str(row[field.name][format]).startswith(value)
+            elif op == 'ends with':
+                if not refsearch:
+                    return field.like('%'+value)
+                else:
+                    return lambda row: str(row[field.name][format]).endswith(value)
+            elif op == 'contains':
+                if not refsearch:
+                    return field.like('%'+value+'%')
+                else:
+                    return lambda row: value in row[field.name][format]
+        except:
+            return None
+
+
+    def search(self, *tables, **args):
+        """
+        Creates a search form and its results for a table
+        Example usage:
+        form, results = crud.search(db.test,
+                               queries = ['equals', 'not equal', 'contains'],
+                               query_labels={'equals':'Equals',
+                                             'not equal':'Not equal'},
+                               fields = ['id','children'],
+                               field_labels = {'id':'ID','children':'Children'},
+                               zero='Please choose',
+                               query = (db.test.id > 0)&(db.test.id != 3) )
+        """
+        table = tables[0]
+        fields = args.get('fields', table.fields)
+        request = current.request
+        db = self.db
+        if not (isinstance(table, db.Table) or table in db.tables):
+            raise HTTP(404)
+        attributes = {}
+        for key in ('orderby','groupby','left','distinct','limitby','cache'):
+            if key in args: attributes[key]=args[key]
+        tbl = TABLE()
+        selected = []; refsearch = []; results = []
+        ops = args.get('queries', [])
+        zero = args.get('zero', '')
+        if not ops:
+            ops = ['equals', 'not equal', 'greater than',
+                   'less than', 'starts with',
+                   'ends with', 'contains']
+        ops.insert(0,zero)
+        query_labels = args.get('query_labels', {})
+        query = args.get('query',table.id > 0)
+        field_labels = args.get('field_labels',{})
+        for field in fields:
+            field = table[field]
+            if not field.readable: continue
+            fieldname = field.name
+            chkval = request.vars.get('chk' + fieldname, None)
+            txtval = request.vars.get('txt' + fieldname, None)
+            opval = request.vars.get('op' + fieldname, None)
+            row = TR(TD(INPUT(_type = "checkbox", _name = "chk" + fieldname,
+                              _disabled = (field.type == 'id'),
+                              value = (field.type == 'id' or chkval == 'on'))),
+                     TD(field_labels.get(fieldname,field.label)),
+                     TD(SELECT([OPTION(query_labels.get(op,op),
+                                       _value=op) for op in ops],
+                               _name = "op" + fieldname,
+                               value = opval)),
+                     TD(INPUT(_type = "text", _name = "txt" + fieldname,
+                              _value = txtval, _id='txt' + fieldname,
+                              _class = str(field.type))))
+            tbl.append(row)
+            if request.post_vars and (chkval or field.type=='id'):
+                if txtval and opval != '':
+                    if field.type[0:10] == 'reference ':
+                        refsearch.append(self.get_query(field,
+                                    opval, txtval, refsearch=True))
+                    else:
+                        value, error = field.validate(txtval)
+                        if not error:
+                            ### TODO deal with 'starts with', 'ends with', 'contains' on GAE
+                            query &= self.get_query(field, opval, value)
+                        else:
+                            row[3].append(DIV(error,_class='error'))
+                selected.append(field)
+        form = FORM(tbl,INPUT(_type="submit"))
+        if selected:
+            try:
+                results = db(query).select(*selected,**attributes)
+                for r in refsearch:
+                    results = results.find(r)
+            except: # hmmm, we should do better here
+                results = None
+        return form, results
+
+
+urllib2.install_opener(urllib2.build_opener(urllib2.HTTPCookieProcessor()))
+
+def fetch(url, data=None, headers={},
+          cookie=Cookie.SimpleCookie(),
+          user_agent='Mozilla/5.0'):
+    if data != None:
+        data = urllib.urlencode(data)
+    if user_agent: headers['User-agent'] = user_agent
+    headers['Cookie'] = ' '.join(['%s=%s;'%(c.key,c.value) for c in cookie.values()])
+    try:
+        from google.appengine.api import urlfetch
+    except ImportError:
+        req = urllib2.Request(url, data, headers)
+        html = urllib2.urlopen(req).read()
+    else:
+        method = ((data==None) and urlfetch.GET) or urlfetch.POST
+        while url is not None:
+            response = urlfetch.fetch(url=url, payload=data,
+                                      method=method, headers=headers,
+                                      allow_truncated=False,follow_redirects=False,
+                                      deadline=10)
+            # next request will be a get, so no need to send the data again
+            data = None
+            method = urlfetch.GET
+            # load cookies from the response
+            cookie.load(response.headers.get('set-cookie', ''))
+            url = response.headers.get('location')
+        html = response.content
+    return html
+
+regex_geocode = \
+    re.compile('\(?P[^,]*),(?P[^,]*).*?\')
+
+
+def geocode(address):
+    try:
+        a = urllib.quote(address)
+        txt = fetch('http://maps.google.com/maps/geo?q=%s&output=xml'
+                     % a)
+        item = regex_geocode.search(txt)
+        (la, lo) = (float(item.group('la')), float(item.group('lo')))
+        return (la, lo)
+    except:
+        return (0.0, 0.0)
+
+
+def universal_caller(f, *a, **b):
+    c = f.func_code.co_argcount
+    n = f.func_code.co_varnames[:c]
+
+    defaults = f.func_defaults or []
+    pos_args = n[0:-len(defaults)]
+    named_args = n[-len(defaults):]
+
+    arg_dict = {}
+
+    # Fill the arg_dict with name and value for the submitted, positional values
+    for pos_index, pos_val in enumerate(a[:c]):
+        arg_dict[n[pos_index]] = pos_val    # n[pos_index] is the name of the argument
+
+    # There might be pos_args left, that are sent as named_values. Gather them as well.
+    # If a argument already is populated with values we simply replaces them.
+    for arg_name in pos_args[len(arg_dict):]:
+        if b.has_key(arg_name):
+            arg_dict[arg_name] = b[arg_name]
+
+    if len(arg_dict) >= len(pos_args):
+        # All the positional arguments is found. The function may now be called.
+        # However, we need to update the arg_dict with the values from the named arguments as well.
+        for arg_name in named_args:
+            if b.has_key(arg_name):
+                arg_dict[arg_name] = b[arg_name]
+
+        return f(**arg_dict)
+
+    # Raise an error, the function cannot be called.
+    raise HTTP(404, "Object does not exist")
+
+
+class Service(object):
+
+    def __init__(self, environment=None):
+        self.run_procedures = {}
+        self.csv_procedures = {}
+        self.xml_procedures = {}
+        self.rss_procedures = {}
+        self.json_procedures = {}
+        self.jsonrpc_procedures = {}
+        self.xmlrpc_procedures = {}
+        self.amfrpc_procedures = {}
+        self.amfrpc3_procedures = {}
+        self.soap_procedures = {}
+
+    def run(self, f):
+        """
+        example::
+
+            service = Service(globals())
+            @service.run
+            def myfunction(a, b):
+                return a + b
+            def call():
+                return service()
+
+        Then call it with::
+
+            wget http://..../app/default/call/run/myfunction?a=3&b=4
+
+        """
+        self.run_procedures[f.__name__] = f
+        return f
+
+    def csv(self, f):
+        """
+        example::
+
+            service = Service(globals())
+            @service.csv
+            def myfunction(a, b):
+                return a + b
+            def call():
+                return service()
+
+        Then call it with::
+
+            wget http://..../app/default/call/csv/myfunction?a=3&b=4
+
+        """
+        self.run_procedures[f.__name__] = f
+        return f
+
+    def xml(self, f):
+        """
+        example::
+
+            service = Service(globals())
+            @service.xml
+            def myfunction(a, b):
+                return a + b
+            def call():
+                return service()
+
+        Then call it with::
+
+            wget http://..../app/default/call/xml/myfunction?a=3&b=4
+
+        """
+        self.run_procedures[f.__name__] = f
+        return f
+
+    def rss(self, f):
+        """
+        example::
+
+            service = Service(globals())
+            @service.rss
+            def myfunction():
+                return dict(title=..., link=..., description=...,
+                    created_on=..., entries=[dict(title=..., link=...,
+                        description=..., created_on=...])
+            def call():
+                return service()
+
+        Then call it with::
+
+            wget http://..../app/default/call/rss/myfunction
+
+        """
+        self.rss_procedures[f.__name__] = f
+        return f
+
+    def json(self, f):
+        """
+        example::
+
+            service = Service(globals())
+            @service.json
+            def myfunction(a, b):
+                return [{a: b}]
+            def call():
+                return service()
+
+        Then call it with::
+
+            wget http://..../app/default/call/json/myfunction?a=hello&b=world
+
+        """
+        self.json_procedures[f.__name__] = f
+        return f
+
+    def jsonrpc(self, f):
+        """
+        example::
+
+            service = Service(globals())
+            @service.jsonrpc
+            def myfunction(a, b):
+                return a + b
+            def call():
+                return service()
+
+        Then call it with::
+
+            wget http://..../app/default/call/jsonrpc/myfunction?a=hello&b=world
+
+        """
+        self.jsonrpc_procedures[f.__name__] = f
+        return f
+
+    def xmlrpc(self, f):
+        """
+        example::
+
+            service = Service(globals())
+            @service.xmlrpc
+            def myfunction(a, b):
+                return a + b
+            def call():
+                return service()
+
+        The call it with::
+
+            wget http://..../app/default/call/xmlrpc/myfunction?a=hello&b=world
+
+        """
+        self.xmlrpc_procedures[f.__name__] = f
+        return f
+
+    def amfrpc(self, f):
+        """
+        example::
+
+            service = Service(globals())
+            @service.amfrpc
+            def myfunction(a, b):
+                return a + b
+            def call():
+                return service()
+
+        The call it with::
+
+            wget http://..../app/default/call/amfrpc/myfunction?a=hello&b=world
+
+        """
+        self.amfrpc_procedures[f.__name__] = f
+        return f
+
+    def amfrpc3(self, domain='default'):
+        """
+        example::
+
+            service = Service(globals())
+            @service.amfrpc3('domain')
+            def myfunction(a, b):
+                return a + b
+            def call():
+                return service()
+
+        The call it with::
+
+            wget http://..../app/default/call/amfrpc3/myfunction?a=hello&b=world
+
+        """
+        if not isinstance(domain, str):
+            raise SyntaxError, "AMF3 requires a domain for function"
+
+        def _amfrpc3(f):
+            if domain:
+                self.amfrpc3_procedures[domain+'.'+f.__name__] = f
+            else:
+                self.amfrpc3_procedures[f.__name__] = f
+            return f
+        return _amfrpc3
+
+    def soap(self, name=None, returns=None, args=None,doc=None):
+        """
+        example::
+
+            service = Service(globals())
+            @service.soap('MyFunction',returns={'result':int},args={'a':int,'b':int,})
+            def myfunction(a, b):
+                return a + b
+            def call():
+                return service()
+
+        The call it with::
+
+            from gluon.contrib.pysimplesoap.client import SoapClient
+            client = SoapClient(wsdl="http://..../app/default/call/soap?WSDL")
+            response = client.MyFunction(a=1,b=2)
+            return response['result']
+
+        Exposes online generated documentation and xml example messages at:
+        - http://..../app/default/call/soap
+        """
+
+        def _soap(f):
+            self.soap_procedures[name or f.__name__] = f, returns, args, doc
+            return f
+        return _soap
+
+    def serve_run(self, args=None):
+        request = current.request
+        if not args:
+            args = request.args
+        if args and args[0] in self.run_procedures:
+            return str(universal_caller(self.run_procedures[args[0]],
+                                        *args[1:], **dict(request.vars)))
+        self.error()
+
+    def serve_csv(self, args=None):
+        request = current.request
+        response = current.response
+        response.headers['Content-Type'] = 'text/x-csv'
+        if not args:
+            args = request.args
+
+        def none_exception(value):
+            if isinstance(value, unicode):
+                return value.encode('utf8')
+            if hasattr(value, 'isoformat'):
+                return value.isoformat()[:19].replace('T', ' ')
+            if value == None:
+                return ''
+            return value
+        if args and args[0] in self.run_procedures:
+            r = universal_caller(self.run_procedures[args[0]],
+                                 *args[1:], **dict(request.vars))
+            s = cStringIO.StringIO()
+            if hasattr(r, 'export_to_csv_file'):
+                r.export_to_csv_file(s)
+            elif r and isinstance(r[0], (dict, Storage)):
+                import csv
+                writer = csv.writer(s)
+                writer.writerow(r[0].keys())
+                for line in r:
+                    writer.writerow([none_exception(v) \
+                                     for v in line.values()])
+            else:
+                import csv
+                writer = csv.writer(s)
+                for line in r:
+                    writer.writerow(line)
+            return s.getvalue()
+        self.error()
+
+    def serve_xml(self, args=None):
+        request = current.request
+        response = current.response
+        response.headers['Content-Type'] = 'text/xml'
+        if not args:
+            args = request.args
+        if args and args[0] in self.run_procedures:
+            s = universal_caller(self.run_procedures[args[0]],
+                                 *args[1:], **dict(request.vars))
+            if hasattr(s, 'as_list'):
+                s = s.as_list()
+            return serializers.xml(s)
+        self.error()
+
+    def serve_rss(self, args=None):
+        request = current.request
+        response = current.response
+        if not args:
+            args = request.args
+        if args and args[0] in self.rss_procedures:
+            feed = universal_caller(self.rss_procedures[args[0]],
+                                    *args[1:], **dict(request.vars))
+        else:
+            self.error()
+        response.headers['Content-Type'] = 'application/rss+xml'
+        return serializers.rss(feed)
+
+    def serve_json(self, args=None):
+        request = current.request
+        response = current.response
+        response.headers['Content-Type'] = 'text/x-json'
+        if not args:
+            args = request.args
+        d = dict(request.vars)
+        if args and args[0] in self.json_procedures:
+            s = universal_caller(self.json_procedures[args[0]],*args[1:],**d)
+            if hasattr(s, 'as_list'):
+                s = s.as_list()
+            return response.json(s)
+        self.error()
+
+    class JsonRpcException(Exception):
+        def __init__(self,code,info):
+            self.code,self.info = code,info
+
+    def serve_jsonrpc(self):
+        import contrib.simplejson as simplejson
+        def return_response(id, result):
+            return serializers.json({'version': '1.1',
+                'id': id, 'result': result, 'error': None})
+
+        def return_error(id, code, message):
+            return serializers.json({'id': id,
+                                     'version': '1.1',
+                                     'error': {'name': 'JSONRPCError',
+                                        'code': code, 'message': message}
+                                     })
+
+        request = current.request
+        methods = self.jsonrpc_procedures
+        data = simplejson.loads(request.body.read())
+        id, method, params = data['id'], data['method'], data.get('params','')
+        if not method in methods:
+            return return_error(id, 100, 'method "%s" does not exist' % method)
+        try:
+            s = methods[method](*params)
+            if hasattr(s, 'as_list'):
+                s = s.as_list()
+            return return_response(id, s)
+        except Service.JsonRpcException, e:
+            return return_error(id, e.code, e.info)
+        except BaseException:
+            etype, eval, etb = sys.exc_info()
+            return return_error(id, 100, '%s: %s' % (etype.__name__, eval))
+        except:
+            etype, eval, etb = sys.exc_info()
+            return return_error(id, 100, 'Exception %s: %s' % (etype, eval))
+
+    def serve_xmlrpc(self):
+        request = current.request
+        response = current.response
+        services = self.xmlrpc_procedures.values()
+        return response.xmlrpc(request, services)
+
+    def serve_amfrpc(self, version=0):
+        try:
+            import pyamf
+            import pyamf.remoting.gateway
+        except:
+            return "pyamf not installed or not in Python sys.path"
+        request = current.request
+        response = current.response
+        if version == 3:
+            services = self.amfrpc3_procedures
+            base_gateway = pyamf.remoting.gateway.BaseGateway(services)
+            pyamf_request = pyamf.remoting.decode(request.body)
+        else:
+            services = self.amfrpc_procedures
+            base_gateway = pyamf.remoting.gateway.BaseGateway(services)
+            context = pyamf.get_context(pyamf.AMF0)
+            pyamf_request = pyamf.remoting.decode(request.body, context)
+        pyamf_response = pyamf.remoting.Envelope(pyamf_request.amfVersion)
+        for name, message in pyamf_request:
+            pyamf_response[name] = base_gateway.getProcessor(message)(message)
+        response.headers['Content-Type'] = pyamf.remoting.CONTENT_TYPE
+        if version==3:
+            return pyamf.remoting.encode(pyamf_response).getvalue()
+        else:
+            return pyamf.remoting.encode(pyamf_response, context).getvalue()
+
+    def serve_soap(self, version="1.1"):
+        try:
+            from contrib.pysimplesoap.server import SoapDispatcher
+        except:
+            return "pysimplesoap not installed in contrib"
+        request = current.request
+        response = current.response
+        procedures = self.soap_procedures
+
+        location = "%s://%s%s" % (
+                        request.env.wsgi_url_scheme,
+                        request.env.http_host,
+                        URL(r=request,f="call/soap",vars={}))
+        namespace = 'namespace' in response and response.namespace or location
+        documentation = response.description or ''
+        dispatcher = SoapDispatcher(
+            name = response.title,
+            location = location,
+            action = location, # SOAPAction
+            namespace = namespace,
+            prefix='pys',
+            documentation = documentation,
+            ns = True)
+        for method, (function, returns, args, doc) in procedures.items():
+            dispatcher.register_function(method, function, returns, args, doc)
+        if request.env.request_method == 'POST':
+            # Process normal Soap Operation
+            response.headers['Content-Type'] = 'text/xml'
+            return dispatcher.dispatch(request.body.read())
+        elif 'WSDL' in request.vars:
+            # Return Web Service Description
+            response.headers['Content-Type'] = 'text/xml'
+            return dispatcher.wsdl()
+        elif 'op' in request.vars:
+            # Return method help webpage
+            response.headers['Content-Type'] = 'text/html'
+            method  = request.vars['op']
+            sample_req_xml, sample_res_xml, doc = dispatcher.help(method)
+            body = [H1("Welcome to Web2Py SOAP webservice gateway"),
+                    A("See all webservice operations",
+                      _href=URL(r=request,f="call/soap",vars={})),
+                    H2(method),
+                    P(doc),
+                    UL(LI("Location: %s" % dispatcher.location),
+                       LI("Namespace: %s" % dispatcher.namespace),
+                       LI("SoapAction: %s" % dispatcher.action),
+                    ),
+                    H3("Sample SOAP XML Request Message:"),
+                    CODE(sample_req_xml,language="xml"),
+                    H3("Sample SOAP XML Response Message:"),
+                    CODE(sample_res_xml,language="xml"),
+                    ]
+            return {'body': body}
+        else:
+            # Return general help and method list webpage
+            response.headers['Content-Type'] = 'text/html'
+            body = [H1("Welcome to Web2Py SOAP webservice gateway"),
+                    P(response.description),
+                    P("The following operations are available"),
+                    A("See WSDL for webservice description",
+                      _href=URL(r=request,f="call/soap",vars={"WSDL":None})),
+                    UL([LI(A("%s: %s" % (method, doc or ''),
+                             _href=URL(r=request,f="call/soap",vars={'op': method})))
+                        for method, doc in dispatcher.list_methods()]),
+                    ]
+            return {'body': body}
+
+    def __call__(self):
+        """
+        register services with:
+        service = Service(globals())
+        @service.run
+        @service.rss
+        @service.json
+        @service.jsonrpc
+        @service.xmlrpc
+        @service.jsonrpc
+        @service.amfrpc
+        @service.amfrpc3('domain')
+        @service.soap('Method', returns={'Result':int}, args={'a':int,'b':int,})
+
+        expose services with
+
+        def call(): return service()
+
+        call services with
+        http://..../app/default/call/run?[parameters]
+        http://..../app/default/call/rss?[parameters]
+        http://..../app/default/call/json?[parameters]
+        http://..../app/default/call/jsonrpc
+        http://..../app/default/call/xmlrpc
+        http://..../app/default/call/amfrpc
+        http://..../app/default/call/amfrpc3
+        http://..../app/default/call/soap
+        """
+
+        request = current.request
+        if len(request.args) < 1:
+            raise HTTP(404, "Not Found")
+        arg0 = request.args(0)
+        if arg0 == 'run':
+            return self.serve_run(request.args[1:])
+        elif arg0 == 'rss':
+            return self.serve_rss(request.args[1:])
+        elif arg0 == 'csv':
+            return self.serve_csv(request.args[1:])
+        elif arg0 == 'xml':
+            return self.serve_xml(request.args[1:])
+        elif arg0 == 'json':
+            return self.serve_json(request.args[1:])
+        elif arg0 == 'jsonrpc':
+            return self.serve_jsonrpc()
+        elif arg0 == 'xmlrpc':
+            return self.serve_xmlrpc()
+        elif arg0 == 'amfrpc':
+            return self.serve_amfrpc()
+        elif arg0 == 'amfrpc3':
+            return self.serve_amfrpc(3)
+        elif arg0 == 'soap':
+            return self.serve_soap()
+        else:
+            self.error()
+
+    def error(self):
+        raise HTTP(404, "Object does not exist")
+
+
+def completion(callback):
+    """
+    Executes a task on completion of the called action. For example:
+
+        from gluon.tools import completion
+        @completion(lambda d: logging.info(repr(d)))
+        def index():
+            return dict(message='hello')
+
+    It logs the output of the function every time input is called.
+    The argument of completion is executed in a new thread.
+    """
+    def _completion(f):
+        def __completion(*a,**b):
+            d = None
+            try:
+                d = f(*a,**b)
+                return d
+            finally:
+                thread.start_new_thread(callback,(d,))
+        return __completion
+    return _completion
+
+def prettydate(d,T=lambda x:x):
+    try:
+        dt = datetime.datetime.now() - d
+    except:
+        return ''
+    if dt.days >= 2*365:
+        return T('%d years ago') % int(dt.days / 365)
+    elif dt.days >= 365:
+        return T('1 year ago')
+    elif dt.days >= 60:
+        return T('%d months ago') % int(dt.days / 30)
+    elif dt.days > 21:
+        return T('1 month ago')
+    elif dt.days >= 14:
+        return T('%d weeks ago') % int(dt.days / 7)
+    elif dt.days >= 7:
+        return T('1 week ago')
+    elif dt.days > 1:
+        return T('%d days ago') % dt.days
+    elif dt.days == 1:
+        return T('1 day ago')
+    elif dt.seconds >= 2*60*60:
+        return T('%d hours ago') % int(dt.seconds / 3600)
+    elif dt.seconds >= 60*60:
+        return T('1 hour ago')
+    elif dt.seconds >= 2*60:
+        return T('%d minutes ago') % int(dt.seconds / 60)
+    elif dt.seconds >= 60:
+        return T('1 minute ago')
+    elif dt.seconds > 1:
+        return T('%d seconds ago') % dt.seconds
+    elif dt.seconds == 1:
+        return T('1 second ago')
+    else:
+        return T('now')
+
+def test_thread_separation():
+    def f():
+        c=PluginManager()
+        lock1.acquire()
+        lock2.acquire()
+        c.x=7
+        lock1.release()
+        lock2.release()
+    lock1=thread.allocate_lock()
+    lock2=thread.allocate_lock()
+    lock1.acquire()
+    thread.start_new_thread(f,())
+    a=PluginManager()
+    a.x=5
+    lock1.release()
+    lock2.acquire()
+    return a.x
+
+class PluginManager(object):
+    """
+
+    Plugin Manager is similar to a storage object but it is a single level singleton
+    this means that multiple instances within the same thread share the same attributes
+    Its constructor is also special. The first argument is the name of the plugin you are defining.
+    The named arguments are parameters needed by the plugin with default values.
+    If the parameters were previous defined, the old values are used.
+
+    For example:
+
+    ### in some general configuration file:
+    >>> plugins = PluginManager()
+    >>> plugins.me.param1=3
+
+    ### within the plugin model
+    >>> _ = PluginManager('me',param1=5,param2=6,param3=7)
+
+    ### where the plugin is used
+    >>> print plugins.me.param1
+    3
+    >>> print plugins.me.param2
+    6
+    >>> plugins.me.param3 = 8
+    >>> print plugins.me.param3
+    8
+
+    Here are some tests:
+
+    >>> a=PluginManager()
+    >>> a.x=6
+    >>> b=PluginManager('check')
+    >>> print b.x
+    6
+    >>> b=PluginManager() # reset settings
+    >>> print b.x
+    
+    >>> b.x=7
+    >>> print a.x
+    7
+    >>> a.y.z=8
+    >>> print b.y.z
+    8
+    >>> test_thread_separation()
+    5
+    >>> plugins=PluginManager('me',db='mydb')
+    >>> print plugins.me.db
+    mydb
+    >>> print 'me' in plugins
+    True
+    >>> print plugins.me.installed
+    True
+    """
+    instances = {}
+    def __new__(cls,*a,**b):
+        id = thread.get_ident()
+        lock = thread.allocate_lock()
+        try:
+            lock.acquire()
+            try:
+                return cls.instances[id]
+            except KeyError:
+                instance = object.__new__(cls,*a,**b)
+                cls.instances[id] = instance
+                return instance
+        finally:
+            lock.release()
+    def __init__(self,plugin=None,**defaults):
+        if not plugin:
+            self.__dict__.clear()
+        settings = self.__getattr__(plugin)
+        settings.installed = True
+        [settings.update({key:value}) for key,value in defaults.items() if not key in settings]
+    def __getattr__(self, key):
+        if not key in self.__dict__:
+            self.__dict__[key] = Storage()
+        return self.__dict__[key]
+    def keys(self):
+        return self.__dict__.keys()
+    def __contains__(self,key):
+        return key in self.__dict__
+
+if __name__ == '__main__':
+    import doctest
+    doctest.testmod()
+

ADDED   gluon/utils.py
Index: gluon/utils.py
==================================================================
--- /dev/null
+++ gluon/utils.py
@@ -0,0 +1,127 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro 
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+This file specifically includes utilities for security.
+"""
+
+import hashlib
+import hmac
+import uuid
+import random
+import time
+import os
+import logging
+
+logger = logging.getLogger("web2py")
+
+def md5_hash(text):
+    """ Generate a md5 hash with the given text """
+    return hashlib.md5(text).hexdigest()
+
+def simple_hash(text, digest_alg = 'md5'):
+    """
+    Generates hash with the given text using the specified
+    digest hashing algorithm
+    """
+    if not digest_alg:
+        raise RuntimeError, "simple_hash with digest_alg=None"
+    elif not isinstance(digest_alg,str):
+        h = digest_alg(text)
+    else:
+        h = hashlib.new(digest_alg)
+        h.update(text)
+    return h.hexdigest()
+
+def get_digest(value):
+    """
+    Returns a hashlib digest algorithm from a string
+    """
+    if not isinstance(value,str):
+        return value
+    value = value.lower()
+    if value == "md5":
+        return hashlib.md5
+    elif value == "sha1":
+        return hashlib.sha1
+    elif value == "sha224":
+        return hashlib.sha224
+    elif value == "sha256":
+        return hashlib.sha256
+    elif value == "sha384":
+        return hashlib.sha384
+    elif value == "sha512":
+        return hashlib.sha512
+    else:
+        raise ValueError("Invalid digest algorithm")
+
+def hmac_hash(value, key, digest_alg='md5', salt=None):
+    if ':' in key:
+        digest_alg, key = key.split(':')
+    digest_alg = get_digest(digest_alg)
+    d = hmac.new(key,value,digest_alg)
+    if salt:
+        d.update(str(salt))
+    return d.hexdigest()
+
+
+### compute constant ctokens
+def initialize_urandom():
+    """
+    This function and the web2py_uuid follow from the following discussion:
+    http://groups.google.com/group/web2py-developers/browse_thread/thread/7fd5789a7da3f09
+
+    At startup web2py compute a unique ID that identifies the machine by adding
+    uuid.getnode() + int(time.time() * 1e3)
+
+    This is a 48-bit number. It converts the number into 16 8-bit tokens.
+    It uses this value to initialize the entropy source ('/dev/urandom') and to seed random.
+
+    If os.random() is not supported, it falls back to using random and issues a warning.
+    """
+    node_id = uuid.getnode()
+    microseconds = int(time.time() * 1e6)
+    ctokens = [((node_id + microseconds) >> ((i%6)*8)) % 256 for i in range(16)]
+    random.seed(node_id + microseconds)
+    try:
+        os.urandom(1)
+        try:
+            # try to add process-specific entropy
+            frandom = open('/dev/urandom','wb')
+            try:
+                frandom.write(''.join(chr(t) for t in ctokens))
+            finally:
+                frandom.close()
+        except IOError:
+            # works anyway
+            pass
+    except NotImplementedError:
+        logger.warning(
+"""Cryptographically secure session management is not possible on your system because
+your system does not provide a cryptographically secure entropy source.
+This is not specific to web2py; consider deploying on a different operating system.""")
+    return ctokens
+ctokens = initialize_urandom()
+
+def web2py_uuid():
+    """
+    This function follows from the following discussion:
+    http://groups.google.com/group/web2py-developers/browse_thread/thread/7fd5789a7da3f09
+
+    It works like uuid.uuid4 except that tries to use os.urandom() if possible
+    and it XORs the output with the tokens uniquely associated with this machine.
+    """
+    bytes = [random.randrange(256) for i in range(16)]
+    try:
+        ubytes = [ord(c) for c in os.urandom(16)] # use /dev/urandom if possible
+        bytes = [bytes[i] ^ ubytes[i] for i in range(16)]
+    except NotImplementedError:
+        pass
+    ## xor bytes with constant ctokens
+    bytes = ''.join(chr(c ^ ctokens[i]) for i,c in enumerate(bytes))
+    return str(uuid.UUID(bytes=bytes, version=4))
+

ADDED   gluon/validators.py
Index: gluon/validators.py
==================================================================
--- /dev/null
+++ gluon/validators.py
@@ -0,0 +1,2934 @@
+#!/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro 
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+Thanks to ga2arch for help with IS_IN_DB and IS_NOT_IN_DB on GAE
+"""
+
+import os
+import re
+import datetime
+import time
+import cgi
+import urllib
+import struct
+import decimal
+import unicodedata
+from cStringIO import StringIO
+from utils import simple_hash, hmac_hash
+
+__all__ = [
+    'CLEANUP',
+    'CRYPT',
+    'IS_ALPHANUMERIC',
+    'IS_DATE_IN_RANGE',
+    'IS_DATE',
+    'IS_DATETIME_IN_RANGE',
+    'IS_DATETIME',
+    'IS_DECIMAL_IN_RANGE',
+    'IS_EMAIL',
+    'IS_EMPTY_OR',
+    'IS_EXPR',
+    'IS_FLOAT_IN_RANGE',
+    'IS_IMAGE',
+    'IS_IN_DB',
+    'IS_IN_SET',
+    'IS_INT_IN_RANGE',
+    'IS_IPV4',
+    'IS_LENGTH',
+    'IS_LIST_OF',
+    'IS_LOWER',
+    'IS_MATCH',
+    'IS_EQUAL_TO',
+    'IS_NOT_EMPTY',
+    'IS_NOT_IN_DB',
+    'IS_NULL_OR',
+    'IS_SLUG',
+    'IS_STRONG',
+    'IS_TIME',
+    'IS_UPLOAD_FILENAME',
+    'IS_UPPER',
+    'IS_URL',
+    ]
+
+def translate(text):
+    if isinstance(text,(str,unicode)):
+        from globals import current
+        if hasattr(current,'T'):
+            return current.T(text)
+    return text
+
+def options_sorter(x,y):
+    return (str(x[1]).upper()>str(y[1]).upper() and 1) or -1
+
+class Validator(object):
+    """
+    Root for all validators, mainly for documentation purposes.
+
+    Validators are classes used to validate input fields (including forms
+    generated from database tables).
+
+    Here is an example of using a validator with a FORM::
+
+        INPUT(_name='a', requires=IS_INT_IN_RANGE(0, 10))
+
+    Here is an example of how to require a validator for a table field::
+
+        db.define_table('person', SQLField('name'))
+        db.person.name.requires=IS_NOT_EMPTY()
+
+    Validators are always assigned using the requires attribute of a field. A
+    field can have a single validator or multiple validators. Multiple
+    validators are made part of a list::
+
+        db.person.name.requires=[IS_NOT_EMPTY(), IS_NOT_IN_DB(db, 'person.id')]
+
+    Validators are called by the function accepts on a FORM or other HTML
+    helper object that contains a form. They are always called in the order in
+    which they are listed.
+
+    Built-in validators have constructors that take the optional argument error
+    message which allows you to change the default error message.
+    Here is an example of a validator on a database table::
+
+        db.person.name.requires=IS_NOT_EMPTY(error_message=T('fill this'))
+
+    where we have used the translation operator T to allow for
+    internationalization.
+
+    Notice that default error messages are not translated.
+    """
+
+    def formatter(self, value):
+        """
+        For some validators returns a formatted version (matching the validator)
+        of value. Otherwise just returns the value.
+        """
+        return value
+
+
+class IS_MATCH(Validator):
+    """
+    example::
+
+        INPUT(_type='text', _name='name', requires=IS_MATCH('.+'))
+
+    the argument of IS_MATCH is a regular expression::
+
+        >>> IS_MATCH('.+')('hello')
+        ('hello', None)
+
+        >>> IS_MATCH('.+')('')
+        ('', 'invalid expression')
+    """
+
+    def __init__(self, expression, error_message='invalid expression', strict=True):
+        if strict:
+            if not expression.endswith('$'):
+                expression = '(%s)$' % expression
+        self.regex = re.compile(expression)
+        self.error_message = error_message
+
+    def __call__(self, value):
+        match = self.regex.match(value)
+        if match:
+            return (match.group(), None)
+        return (value, translate(self.error_message))
+
+
+class IS_EQUAL_TO(Validator):
+    """
+    example::
+
+        INPUT(_type='text', _name='password')
+        INPUT(_type='text', _name='password2',
+              requires=IS_EQUAL_TO(request.vars.password))
+
+    the argument of IS_EQUAL_TO is a string
+
+        >>> IS_EQUAL_TO('aaa')('aaa')
+        ('aaa', None)
+
+        >>> IS_EQUAL_TO('aaa')('aab')
+        ('aab', 'no match')
+    """
+
+    def __init__(self, expression, error_message='no match'):
+        self.expression = expression
+        self.error_message = error_message
+
+    def __call__(self, value):
+        if value == self.expression:
+            return (value, None)
+        return (value, translate(self.error_message))
+
+
+class IS_EXPR(Validator):
+    """
+    example::
+
+        INPUT(_type='text', _name='name',
+            requires=IS_EXPR('5 < int(value) < 10'))
+
+    the argument of IS_EXPR must be python condition::
+
+        >>> IS_EXPR('int(value) < 2')('1')
+        ('1', None)
+
+        >>> IS_EXPR('int(value) < 2')('2')
+        ('2', 'invalid expression')
+    """
+
+    def __init__(self, expression, error_message='invalid expression'):
+        self.expression = expression
+        self.error_message = error_message
+
+    def __call__(self, value):
+        environment = {'value': value}
+        exec '__ret__=' + self.expression in environment
+        if environment['__ret__']:
+            return (value, None)
+        return (value, translate(self.error_message))
+
+
+class IS_LENGTH(Validator):
+    """
+    Checks if length of field's value fits between given boundaries. Works
+    for both text and file inputs.
+
+    Arguments:
+
+    maxsize: maximum allowed length / size
+    minsize: minimum allowed length / size
+
+    Examples::
+
+        #Check if text string is shorter than 33 characters:
+        INPUT(_type='text', _name='name', requires=IS_LENGTH(32))
+
+        #Check if password string is longer than 5 characters:
+        INPUT(_type='password', _name='name', requires=IS_LENGTH(minsize=6))
+
+        #Check if uploaded file has size between 1KB and 1MB:
+        INPUT(_type='file', _name='name', requires=IS_LENGTH(1048576, 1024))
+
+        >>> IS_LENGTH()('')
+        ('', None)
+        >>> IS_LENGTH()('1234567890')
+        ('1234567890', None)
+        >>> IS_LENGTH(maxsize=5, minsize=0)('1234567890')  # too long
+        ('1234567890', 'enter from 0 to 5 characters')
+        >>> IS_LENGTH(maxsize=50, minsize=20)('1234567890')  # too short
+        ('1234567890', 'enter from 20 to 50 characters')
+    """
+
+    def __init__(self, maxsize=255, minsize=0,
+                 error_message='enter from %(min)g to %(max)g characters'):
+        self.maxsize = maxsize
+        self.minsize = minsize
+        self.error_message = error_message
+
+    def __call__(self, value):
+        if isinstance(value, cgi.FieldStorage):
+            if value.file:
+                value.file.seek(0, os.SEEK_END)
+                length = value.file.tell()
+                value.file.seek(0, os.SEEK_SET)
+            else:
+                val = value.value
+                if val:
+                    length = len(val)
+                else:
+                    length = 0
+            if self.minsize <= length <= self.maxsize:
+                return (value, None)
+        elif isinstance(value, (str, unicode, list)):
+            if self.minsize <= len(value) <= self.maxsize:
+                return (value, None)
+        elif self.minsize <= len(str(value)) <= self.maxsize:
+            try:
+                value.decode('utf8')
+                return (value, None)
+            except:
+                pass
+        return (value, translate(self.error_message) \
+                    % dict(min=self.minsize, max=self.maxsize))
+
+
+class IS_IN_SET(Validator):
+    """
+    example::
+
+        INPUT(_type='text', _name='name',
+              requires=IS_IN_SET(['max', 'john'],zero=''))
+
+    the argument of IS_IN_SET must be a list or set
+
+        >>> IS_IN_SET(['max', 'john'])('max')
+        ('max', None)
+        >>> IS_IN_SET(['max', 'john'])('massimo')
+        ('massimo', 'value not allowed')
+        >>> IS_IN_SET(['max', 'john'], multiple=True)(('max', 'john'))
+        (('max', 'john'), None)
+        >>> IS_IN_SET(['max', 'john'], multiple=True)(('bill', 'john'))
+        (('bill', 'john'), 'value not allowed')
+        >>> IS_IN_SET(('id1','id2'), ['first label','second label'])('id1') # Traditional way
+        ('id1', None)
+        >>> IS_IN_SET({'id1':'first label', 'id2':'second label'})('id1')
+        ('id1', None)
+        >>> import itertools
+        >>> IS_IN_SET(itertools.chain(['1','3','5'],['2','4','6']))('1')
+        ('1', None)
+        >>> IS_IN_SET([('id1','first label'), ('id2','second label')])('id1') # Redundant way
+        ('id1', None)
+    """
+
+    def __init__(
+        self,
+        theset,
+        labels=None,
+        error_message='value not allowed',
+        multiple=False,
+        zero='',
+        sort=False,
+        ):
+        self.multiple = multiple
+        if isinstance(theset, dict):
+            self.theset = [str(item) for item in theset]
+            self.labels = theset.values()
+        elif theset and isinstance(theset, (tuple,list)) \
+            and isinstance(theset[0], (tuple,list)) and len(theset[0])==2:
+            self.theset = [str(item) for item,label in theset]
+            self.labels = [str(label) for item,label in theset]
+        else:
+            self.theset = [str(item) for item in theset]
+            self.labels = labels
+        self.error_message = error_message
+        self.zero = zero
+        self.sort = sort
+
+    def options(self,zero=True):
+        if not self.labels:
+            items = [(k, k) for (i, k) in enumerate(self.theset)]
+        else:
+            items = [(k, self.labels[i]) for (i, k) in enumerate(self.theset)]
+        if self.sort:
+            items.sort(options_sorter)
+        if zero and self.zero != None and not self.multiple:
+            items.insert(0,('',self.zero))
+        return items
+
+    def __call__(self, value):
+        if self.multiple:
+            ### if below was values = re.compile("[\w\-:]+").findall(str(value))
+            if isinstance(value, (str,unicode)):
+                values = [value]
+            elif isinstance(value, (tuple, list)):
+                values = value
+            elif not value:
+                values = []
+        else:
+            values = [value]
+        failures = [x for x in values if not x in self.theset]
+        if failures and self.theset:
+            if self.multiple and (value == None or value == ''):
+                return ([], None)
+            return (value, translate(self.error_message))
+        if self.multiple:
+            if isinstance(self.multiple,(tuple,list)) and \
+                    not self.multiple[0]<=len(values)[^\)]+)\)s')
+
+
+class IS_IN_DB(Validator):
+    """
+    example::
+
+        INPUT(_type='text', _name='name',
+              requires=IS_IN_DB(db, db.mytable.myfield, zero=''))
+
+    used for reference fields, rendered as a dropbox
+    """
+
+    def __init__(
+        self,
+        dbset,
+        field,
+        label=None,
+        error_message='value not in database',
+        orderby=None,
+        groupby=None,
+        cache=None,
+        multiple=False,
+        zero='',
+        sort=False,
+        _and=None,
+        ):
+        from dal import Table
+        if isinstance(field,Table): field = field._id
+
+        if hasattr(dbset, 'define_table'):
+            self.dbset = dbset()
+        else:
+            self.dbset = dbset
+        self.field = field
+        (ktable, kfield) = str(self.field).split('.')
+        if not label:
+            label = '%%(%s)s' % kfield
+        if isinstance(label,str):
+            if regex1.match(str(label)):
+                label = '%%(%s)s' % str(label).split('.')[-1]
+            ks = regex2.findall(label)
+            if not kfield in ks:
+                ks += [kfield]
+            fields = ks
+        else:
+            ks = [kfield]
+            fields = 'all'
+        self.fields = fields
+        self.label = label
+        self.ktable = ktable
+        self.kfield = kfield
+        self.ks = ks
+        self.error_message = error_message
+        self.theset = None
+        self.orderby = orderby
+        self.groupby = groupby
+        self.cache = cache
+        self.multiple = multiple
+        self.zero = zero
+        self.sort = sort
+        self._and = _and
+
+    def set_self_id(self, id):
+        if self._and:
+            self._and.record_id = id
+
+    def build_set(self):
+        if self.fields == 'all':
+            fields = [f for f in self.dbset.db[self.ktable]]
+        else:
+            fields = [self.dbset.db[self.ktable][k] for k in self.fields]
+        if self.dbset.db._dbname != 'gae':
+            orderby = self.orderby or reduce(lambda a,b:a|b,fields)
+            groupby = self.groupby
+            dd = dict(orderby=orderby, groupby=groupby, cache=self.cache)
+            records = self.dbset.select(*fields, **dd)
+        else:
+            orderby = self.orderby or reduce(lambda a,b:a|b,(f for f in fields if not f.name=='id'))
+            dd = dict(orderby=orderby, cache=self.cache)
+            records = self.dbset.select(self.dbset.db[self.ktable].ALL, **dd)
+        self.theset = [str(r[self.kfield]) for r in records]
+        if isinstance(self.label,str):
+            self.labels = [self.label % dict(r) for r in records]
+        else:
+            self.labels = [self.label(r) for r in records]
+
+    def options(self, zero=True):
+        self.build_set()
+        items = [(k, self.labels[i]) for (i, k) in enumerate(self.theset)]
+        if self.sort:
+            items.sort(options_sorter)
+        if zero and self.zero != None and not self.multiple:
+            items.insert(0,('',self.zero))
+        return items
+
+    def __call__(self, value):
+        if self.multiple:
+            if isinstance(value,list):
+                values=value
+            elif value:
+                values = [value]
+            else:
+                values = []
+            if isinstance(self.multiple,(tuple,list)) and \
+                    not self.multiple[0]<=len(values) 0:
+            if isinstance(self.record_id, dict):
+                for f in self.record_id:
+                    if str(getattr(rows[0], f)) != str(self.record_id[f]):
+                        return (value, translate(self.error_message))
+            elif str(rows[0].id) != str(self.record_id):
+                return (value, translate(self.error_message))
+        return (value, None)
+
+
+class IS_INT_IN_RANGE(Validator):
+    """
+    Determine that the argument is (or can be represented as) an int,
+    and that it falls within the specified range. The range is interpreted
+    in the Pythonic way, so the test is: min <= value < max.
+
+    The minimum and maximum limits can be None, meaning no lower or upper limit,
+    respectively.
+
+    example::
+
+        INPUT(_type='text', _name='name', requires=IS_INT_IN_RANGE(0, 10))
+
+        >>> IS_INT_IN_RANGE(1,5)('4')
+        (4, None)
+        >>> IS_INT_IN_RANGE(1,5)(4)
+        (4, None)
+        >>> IS_INT_IN_RANGE(1,5)(1)
+        (1, None)
+        >>> IS_INT_IN_RANGE(1,5)(5)
+        (5, 'enter an integer between 1 and 4')
+        >>> IS_INT_IN_RANGE(1,5)(5)
+        (5, 'enter an integer between 1 and 4')
+        >>> IS_INT_IN_RANGE(1,5)(3.5)
+        (3, 'enter an integer between 1 and 4')
+        >>> IS_INT_IN_RANGE(None,5)('4')
+        (4, None)
+        >>> IS_INT_IN_RANGE(None,5)('6')
+        (6, 'enter an integer less than or equal to 4')
+        >>> IS_INT_IN_RANGE(1,None)('4')
+        (4, None)
+        >>> IS_INT_IN_RANGE(1,None)('0')
+        (0, 'enter an integer greater than or equal to 1')
+        >>> IS_INT_IN_RANGE()(6)
+        (6, None)
+        >>> IS_INT_IN_RANGE()('abc')
+        ('abc', 'enter an integer')
+    """
+
+    def __init__(
+        self,
+        minimum=None,
+        maximum=None,
+        error_message=None,
+        ):
+        self.minimum = self.maximum = None
+        if minimum is None:
+            if maximum is None:
+                self.error_message = error_message or 'enter an integer'
+            else:
+                self.maximum = int(maximum)
+                if error_message is None:
+                    error_message = 'enter an integer less than or equal to %(max)g'
+                self.error_message = translate(error_message) % dict(max=self.maximum-1)
+        elif maximum is None:
+            self.minimum = int(minimum)
+            if error_message is None:
+                error_message = 'enter an integer greater than or equal to %(min)g'
+            self.error_message = translate(error_message) % dict(min=self.minimum)
+        else:
+            self.minimum = int(minimum)
+            self.maximum = int(maximum)
+            if error_message is None:
+                error_message = 'enter an integer between %(min)g and %(max)g'
+            self.error_message = translate(error_message) \
+                % dict(min=self.minimum, max=self.maximum-1)
+
+    def __call__(self, value):
+        try:
+            fvalue = float(value)
+            value = int(value)
+            if value != fvalue:
+                return (value, self.error_message)
+            if self.minimum is None:
+                if self.maximum is None or value < self.maximum:
+                    return (value, None)
+            elif self.maximum is None:
+                if value >= self.minimum:
+                    return (value, None)
+            elif self.minimum <= value < self.maximum:
+                    return (value, None)
+        except ValueError:
+            pass
+        return (value, self.error_message)
+
+
+class IS_FLOAT_IN_RANGE(Validator):
+    """
+    Determine that the argument is (or can be represented as) a float,
+    and that it falls within the specified inclusive range.
+    The comparison is made with native arithmetic.
+
+    The minimum and maximum limits can be None, meaning no lower or upper limit,
+    respectively.
+
+    example::
+
+        INPUT(_type='text', _name='name', requires=IS_FLOAT_IN_RANGE(0, 10))
+
+        >>> IS_FLOAT_IN_RANGE(1,5)('4')
+        (4.0, None)
+        >>> IS_FLOAT_IN_RANGE(1,5)(4)
+        (4.0, None)
+        >>> IS_FLOAT_IN_RANGE(1,5)(1)
+        (1.0, None)
+        >>> IS_FLOAT_IN_RANGE(1,5)(5.25)
+        (5.25, 'enter a number between 1 and 5')
+        >>> IS_FLOAT_IN_RANGE(1,5)(6.0)
+        (6.0, 'enter a number between 1 and 5')
+        >>> IS_FLOAT_IN_RANGE(1,5)(3.5)
+        (3.5, None)
+        >>> IS_FLOAT_IN_RANGE(1,None)(3.5)
+        (3.5, None)
+        >>> IS_FLOAT_IN_RANGE(None,5)(3.5)
+        (3.5, None)
+        >>> IS_FLOAT_IN_RANGE(1,None)(0.5)
+        (0.5, 'enter a number greater than or equal to 1')
+        >>> IS_FLOAT_IN_RANGE(None,5)(6.5)
+        (6.5, 'enter a number less than or equal to 5')
+        >>> IS_FLOAT_IN_RANGE()(6.5)
+        (6.5, None)
+        >>> IS_FLOAT_IN_RANGE()('abc')
+        ('abc', 'enter a number')
+    """
+
+    def __init__(
+        self,
+        minimum=None,
+        maximum=None,
+        error_message=None,
+        dot='.'
+        ):
+        self.minimum = self.maximum = None
+        self.dot = dot
+        if minimum is None:
+            if maximum is None:
+                if error_message is None:
+                    error_message = 'enter a number'
+            else:
+                self.maximum = float(maximum)
+                if error_message is None:
+                    error_message = 'enter a number less than or equal to %(max)g'
+        elif maximum is None:
+            self.minimum = float(minimum)
+            if error_message is None:
+                error_message = 'enter a number greater than or equal to %(min)g'
+        else:
+            self.minimum = float(minimum)
+            self.maximum = float(maximum)
+            if error_message is None:
+                error_message = 'enter a number between %(min)g and %(max)g'
+        self.error_message = translate(error_message) \
+            % dict(min=self.minimum, max=self.maximum)
+
+    def __call__(self, value):
+        try:
+            if self.dot=='.':
+                fvalue = float(value)
+            else:
+                fvalue = float(str(value).replace(self.dot,'.'))
+            if self.minimum is None:
+                if self.maximum is None or fvalue <= self.maximum:
+                    return (fvalue, None)
+            elif self.maximum is None:
+                if fvalue >= self.minimum:
+                    return (fvalue, None)
+            elif self.minimum <= fvalue <= self.maximum:
+                    return (fvalue, None)
+        except (ValueError, TypeError):
+            pass
+        return (value, self.error_message)
+
+    def formatter(self,value):
+        if self.dot=='.':
+            return str(value)
+        else:
+            return str(value).replace('.',self.dot)
+
+
+class IS_DECIMAL_IN_RANGE(Validator):
+    """
+    Determine that the argument is (or can be represented as) a Python Decimal,
+    and that it falls within the specified inclusive range.
+    The comparison is made with Python Decimal arithmetic.
+
+    The minimum and maximum limits can be None, meaning no lower or upper limit,
+    respectively.
+
+    example::
+
+        INPUT(_type='text', _name='name', requires=IS_DECIMAL_IN_RANGE(0, 10))
+
+        >>> IS_DECIMAL_IN_RANGE(1,5)('4')
+        (Decimal('4'), None)
+        >>> IS_DECIMAL_IN_RANGE(1,5)(4)
+        (Decimal('4'), None)
+        >>> IS_DECIMAL_IN_RANGE(1,5)(1)
+        (Decimal('1'), None)
+        >>> IS_DECIMAL_IN_RANGE(1,5)(5.25)
+        (5.25, 'enter a number between 1 and 5')
+        >>> IS_DECIMAL_IN_RANGE(5.25,6)(5.25)
+        (Decimal('5.25'), None)
+        >>> IS_DECIMAL_IN_RANGE(5.25,6)('5.25')
+        (Decimal('5.25'), None)
+        >>> IS_DECIMAL_IN_RANGE(1,5)(6.0)
+        (6.0, 'enter a number between 1 and 5')
+        >>> IS_DECIMAL_IN_RANGE(1,5)(3.5)
+        (Decimal('3.5'), None)
+        >>> IS_DECIMAL_IN_RANGE(1.5,5.5)(3.5)
+        (Decimal('3.5'), None)
+        >>> IS_DECIMAL_IN_RANGE(1.5,5.5)(6.5)
+        (6.5, 'enter a number between 1.5 and 5.5')
+        >>> IS_DECIMAL_IN_RANGE(1.5,None)(6.5)
+        (Decimal('6.5'), None)
+        >>> IS_DECIMAL_IN_RANGE(1.5,None)(0.5)
+        (0.5, 'enter a number greater than or equal to 1.5')
+        >>> IS_DECIMAL_IN_RANGE(None,5.5)(4.5)
+        (Decimal('4.5'), None)
+        >>> IS_DECIMAL_IN_RANGE(None,5.5)(6.5)
+        (6.5, 'enter a number less than or equal to 5.5')
+        >>> IS_DECIMAL_IN_RANGE()(6.5)
+        (Decimal('6.5'), None)
+        >>> IS_DECIMAL_IN_RANGE(0,99)(123.123)
+        (123.123, 'enter a number between 0 and 99')
+        >>> IS_DECIMAL_IN_RANGE(0,99)('123.123')
+        ('123.123', 'enter a number between 0 and 99')
+        >>> IS_DECIMAL_IN_RANGE(0,99)('12.34')
+        (Decimal('12.34'), None)
+        >>> IS_DECIMAL_IN_RANGE()('abc')
+        ('abc', 'enter a decimal number')
+    """
+
+    def __init__(
+        self,
+        minimum=None,
+        maximum=None,
+        error_message=None,
+        dot='.'
+        ):
+        self.minimum = self.maximum = None
+        self.dot = dot
+        if minimum is None:
+            if maximum is None:
+                if error_message is None:
+                    error_message = 'enter a decimal number'
+            else:
+                self.maximum = decimal.Decimal(str(maximum))
+                if error_message is None:
+                    error_message = 'enter a number less than or equal to %(max)g'
+        elif maximum is None:
+            self.minimum = decimal.Decimal(str(minimum))
+            if error_message is None:
+                error_message = 'enter a number greater than or equal to %(min)g'
+        else:
+            self.minimum = decimal.Decimal(str(minimum))
+            self.maximum = decimal.Decimal(str(maximum))
+            if error_message is None:
+                error_message = 'enter a number between %(min)g and %(max)g'
+        self.error_message = translate(error_message) \
+            % dict(min=self.minimum, max=self.maximum)
+
+    def __call__(self, value):
+        try:
+            if isinstance(value,decimal.Decimal):
+                v = value
+            else:
+                v = decimal.Decimal(str(value).replace(self.dot,'.'))
+            if self.minimum is None:
+                if self.maximum is None or v <= self.maximum:
+                    return (v, None)
+            elif self.maximum is None:
+                if v >= self.minimum:
+                    return (v, None)
+            elif self.minimum <= v <= self.maximum:
+                    return (v, None)
+        except (ValueError, TypeError, decimal.InvalidOperation):
+            pass
+        return (value, self.error_message)
+
+    def formatter(self, value):
+        return str(value).replace('.',self.dot)
+
+def is_empty(value, empty_regex=None):
+    "test empty field"
+    if isinstance(value, (str, unicode)):
+        value = value.strip()
+        if empty_regex is not None and empty_regex.match(value):
+            value = ''
+    if value == None or value == '' or value == []:
+        return (value, True)
+    return (value, False)
+
+class IS_NOT_EMPTY(Validator):
+    """
+    example::
+
+        INPUT(_type='text', _name='name', requires=IS_NOT_EMPTY())
+
+        >>> IS_NOT_EMPTY()(1)
+        (1, None)
+        >>> IS_NOT_EMPTY()(0)
+        (0, None)
+        >>> IS_NOT_EMPTY()('x')
+        ('x', None)
+        >>> IS_NOT_EMPTY()(' x ')
+        ('x', None)
+        >>> IS_NOT_EMPTY()(None)
+        (None, 'enter a value')
+        >>> IS_NOT_EMPTY()('')
+        ('', 'enter a value')
+        >>> IS_NOT_EMPTY()('  ')
+        ('', 'enter a value')
+        >>> IS_NOT_EMPTY()(' \\n\\t')
+        ('', 'enter a value')
+        >>> IS_NOT_EMPTY()([])
+        ([], 'enter a value')
+        >>> IS_NOT_EMPTY(empty_regex='def')('def')
+        ('', 'enter a value')
+        >>> IS_NOT_EMPTY(empty_regex='de[fg]')('deg')
+        ('', 'enter a value')
+        >>> IS_NOT_EMPTY(empty_regex='def')('abc')
+        ('abc', None)
+    """
+
+    def __init__(self, error_message='enter a value', empty_regex=None):
+        self.error_message = error_message
+        if empty_regex is not None:
+            self.empty_regex = re.compile(empty_regex)
+        else:
+            self.empty_regex = None
+
+    def __call__(self, value):
+        value, empty = is_empty(value, empty_regex=self.empty_regex)
+        if empty:
+            return (value, translate(self.error_message))
+        return (value, None)
+
+
+class IS_ALPHANUMERIC(IS_MATCH):
+    """
+    example::
+
+        INPUT(_type='text', _name='name', requires=IS_ALPHANUMERIC())
+
+        >>> IS_ALPHANUMERIC()('1')
+        ('1', None)
+        >>> IS_ALPHANUMERIC()('')
+        ('', None)
+        >>> IS_ALPHANUMERIC()('A_a')
+        ('A_a', None)
+        >>> IS_ALPHANUMERIC()('!')
+        ('!', 'enter only letters, numbers, and underscore')
+    """
+
+    def __init__(self, error_message='enter only letters, numbers, and underscore'):
+        IS_MATCH.__init__(self, '^[\w]*$', error_message)
+
+
+class IS_EMAIL(Validator):
+    """
+    Checks if field's value is a valid email address. Can be set to disallow
+    or force addresses from certain domain(s).
+
+    Email regex adapted from
+    http://haacked.com/archive/2007/08/21/i-knew-how-to-validate-an-email-address-until-i.aspx,
+    generally following the RFCs, except that we disallow quoted strings
+    and permit underscores and leading numerics in subdomain labels
+
+    Arguments:
+
+    - banned: regex text for disallowed address domains
+    - forced: regex text for required address domains
+
+    Both arguments can also be custom objects with a match(value) method.
+
+    Examples::
+
+        #Check for valid email address:
+        INPUT(_type='text', _name='name',
+            requires=IS_EMAIL())
+
+        #Check for valid email address that can't be from a .com domain:
+        INPUT(_type='text', _name='name',
+            requires=IS_EMAIL(banned='^.*\.com(|\..*)$'))
+
+        #Check for valid email address that must be from a .edu domain:
+        INPUT(_type='text', _name='name',
+            requires=IS_EMAIL(forced='^.*\.edu(|\..*)$'))
+
+        >>> IS_EMAIL()('a@b.com')
+        ('a@b.com', None)
+        >>> IS_EMAIL()('abc@def.com')
+        ('abc@def.com', None)
+        >>> IS_EMAIL()('abc@3def.com')
+        ('abc@3def.com', None)
+        >>> IS_EMAIL()('abc@def.us')
+        ('abc@def.us', None)
+        >>> IS_EMAIL()('abc@d_-f.us')
+        ('abc@d_-f.us', None)
+        >>> IS_EMAIL()('@def.com')           # missing name
+        ('@def.com', 'enter a valid email address')
+        >>> IS_EMAIL()('"abc@def".com')      # quoted name
+        ('"abc@def".com', 'enter a valid email address')
+        >>> IS_EMAIL()('abc+def.com')        # no @
+        ('abc+def.com', 'enter a valid email address')
+        >>> IS_EMAIL()('abc@def.x')          # one-char TLD
+        ('abc@def.x', 'enter a valid email address')
+        >>> IS_EMAIL()('abc@def.12')         # numeric TLD
+        ('abc@def.12', 'enter a valid email address')
+        >>> IS_EMAIL()('abc@def..com')       # double-dot in domain
+        ('abc@def..com', 'enter a valid email address')
+        >>> IS_EMAIL()('abc@.def.com')       # dot starts domain
+        ('abc@.def.com', 'enter a valid email address')
+        >>> IS_EMAIL()('abc@def.c_m')        # underscore in TLD
+        ('abc@def.c_m', 'enter a valid email address')
+        >>> IS_EMAIL()('NotAnEmail')         # missing @
+        ('NotAnEmail', 'enter a valid email address')
+        >>> IS_EMAIL()('abc@NotAnEmail')     # missing TLD
+        ('abc@NotAnEmail', 'enter a valid email address')
+        >>> IS_EMAIL()('customer/department@example.com')
+        ('customer/department@example.com', None)
+        >>> IS_EMAIL()('$A12345@example.com')
+        ('$A12345@example.com', None)
+        >>> IS_EMAIL()('!def!xyz%abc@example.com')
+        ('!def!xyz%abc@example.com', None)
+        >>> IS_EMAIL()('_Yosemite.Sam@example.com')
+        ('_Yosemite.Sam@example.com', None)
+        >>> IS_EMAIL()('~@example.com')
+        ('~@example.com', None)
+        >>> IS_EMAIL()('.wooly@example.com')       # dot starts name
+        ('.wooly@example.com', 'enter a valid email address')
+        >>> IS_EMAIL()('wo..oly@example.com')      # adjacent dots in name
+        ('wo..oly@example.com', 'enter a valid email address')
+        >>> IS_EMAIL()('pootietang.@example.com')  # dot ends name
+        ('pootietang.@example.com', 'enter a valid email address')
+        >>> IS_EMAIL()('.@example.com')            # name is bare dot
+        ('.@example.com', 'enter a valid email address')
+        >>> IS_EMAIL()('Ima.Fool@example.com')
+        ('Ima.Fool@example.com', None)
+        >>> IS_EMAIL()('Ima Fool@example.com')     # space in name
+        ('Ima Fool@example.com', 'enter a valid email address')
+        >>> IS_EMAIL()('localguy@localhost')       # localhost as domain
+        ('localguy@localhost', None)
+
+    """
+
+    regex = re.compile('''
+        ^(?!\.)                            # name may not begin with a dot
+        (
+          [-a-z0-9!\#$%&'*+/=?^_`{|}~]     # all legal characters except dot
+          |
+          (? obtained on 2008-Nov-10
+
+official_url_schemes = [
+    'aaa',
+    'aaas',
+    'acap',
+    'cap',
+    'cid',
+    'crid',
+    'data',
+    'dav',
+    'dict',
+    'dns',
+    'fax',
+    'file',
+    'ftp',
+    'go',
+    'gopher',
+    'h323',
+    'http',
+    'https',
+    'icap',
+    'im',
+    'imap',
+    'info',
+    'ipp',
+    'iris',
+    'iris.beep',
+    'iris.xpc',
+    'iris.xpcs',
+    'iris.lws',
+    'ldap',
+    'mailto',
+    'mid',
+    'modem',
+    'msrp',
+    'msrps',
+    'mtqp',
+    'mupdate',
+    'news',
+    'nfs',
+    'nntp',
+    'opaquelocktoken',
+    'pop',
+    'pres',
+    'prospero',
+    'rtsp',
+    'service',
+    'shttp',
+    'sip',
+    'sips',
+    'snmp',
+    'soap.beep',
+    'soap.beeps',
+    'tag',
+    'tel',
+    'telnet',
+    'tftp',
+    'thismessage',
+    'tip',
+    'tv',
+    'urn',
+    'vemmi',
+    'wais',
+    'xmlrpc.beep',
+    'xmlrpc.beep',
+    'xmpp',
+    'z39.50r',
+    'z39.50s',
+    ]
+unofficial_url_schemes = [
+    'about',
+    'adiumxtra',
+    'aim',
+    'afp',
+    'aw',
+    'callto',
+    'chrome',
+    'cvs',
+    'ed2k',
+    'feed',
+    'fish',
+    'gg',
+    'gizmoproject',
+    'iax2',
+    'irc',
+    'ircs',
+    'itms',
+    'jar',
+    'javascript',
+    'keyparc',
+    'lastfm',
+    'ldaps',
+    'magnet',
+    'mms',
+    'msnim',
+    'mvn',
+    'notes',
+    'nsfw',
+    'psyc',
+    'paparazzi:http',
+    'rmi',
+    'rsync',
+    'secondlife',
+    'sgn',
+    'skype',
+    'ssh',
+    'sftp',
+    'smb',
+    'sms',
+    'soldat',
+    'steam',
+    'svn',
+    'teamspeak',
+    'unreal',
+    'ut2004',
+    'ventrilo',
+    'view-source',
+    'webcal',
+    'wyciwyg',
+    'xfire',
+    'xri',
+    'ymsgr',
+    ]
+all_url_schemes = [None] + official_url_schemes + unofficial_url_schemes
+http_schemes = [None, 'http', 'https']
+
+
+# This regex comes from RFC 2396, Appendix B. It's used to split a URL into
+# its component parts
+# Here are the regex groups that it extracts:
+#    scheme = group(2)
+#    authority = group(4)
+#    path = group(5)
+#    query = group(7)
+#    fragment = group(9)
+
+url_split_regex = \
+    re.compile('^(([^:/?#]+):)?(//([^/?#]*))?([^?#]*)(\?([^#]*))?(#(.*))?')
+
+# Defined in RFC 3490, Section 3.1, Requirement #1
+# Use this regex to split the authority component of a unicode URL into
+# its component labels
+label_split_regex = re.compile(u'[\u002e\u3002\uff0e\uff61]')
+
+
+def escape_unicode(string):
+    '''
+    Converts a unicode string into US-ASCII, using a simple conversion scheme.
+    Each unicode character that does not have a US-ASCII equivalent is
+    converted into a URL escaped form based on its hexadecimal value.
+    For example, the unicode character '\u4e86' will become the string '%4e%86'
+
+    :param string: unicode string, the unicode string to convert into an
+        escaped US-ASCII form
+    :returns: the US-ASCII escaped form of the inputted string
+    :rtype: string
+
+    @author: Jonathan Benn
+    '''
+    returnValue = StringIO()
+
+    for character in string:
+        code = ord(character)
+        if code > 0x7F:
+            hexCode = hex(code)
+            returnValue.write('%' + hexCode[2:4] + '%' + hexCode[4:6])
+        else:
+            returnValue.write(character)
+
+    return returnValue.getvalue()
+
+
+def unicode_to_ascii_authority(authority):
+    '''
+    Follows the steps in RFC 3490, Section 4 to convert a unicode authority
+    string into its ASCII equivalent.
+    For example, u'www.Alliancefran\xe7aise.nu' will be converted into
+    'www.xn--alliancefranaise-npb.nu'
+
+    :param authority: unicode string, the URL authority component to convert,
+                      e.g. u'www.Alliancefran\xe7aise.nu'
+    :returns: the US-ASCII character equivalent to the inputed authority,
+             e.g. 'www.xn--alliancefranaise-npb.nu'
+    :rtype: string
+    :raises Exception: if the function is not able to convert the inputed
+        authority
+
+    @author: Jonathan Benn
+    '''
+    #RFC 3490, Section 4, Step 1
+    #The encodings.idna Python module assumes that AllowUnassigned == True
+
+    #RFC 3490, Section 4, Step 2
+    labels = label_split_regex.split(authority)
+
+    #RFC 3490, Section 4, Step 3
+    #The encodings.idna Python module assumes that UseSTD3ASCIIRules == False
+
+    #RFC 3490, Section 4, Step 4
+    #We use the ToASCII operation because we are about to put the authority
+    #into an IDN-unaware slot
+    asciiLabels = []
+    try:
+        import encodings.idna
+        for label in labels:
+            if label:
+                asciiLabels.append(encodings.idna.ToASCII(label))
+            else:
+                 #encodings.idna.ToASCII does not accept an empty string, but
+                 #it is necessary for us to allow for empty labels so that we
+                 #don't modify the URL
+                asciiLabels.append('')
+    except:
+        asciiLabels=[str(label) for label in labels]
+    #RFC 3490, Section 4, Step 5
+    return str(reduce(lambda x, y: x + unichr(0x002E) + y, asciiLabels))
+
+
+def unicode_to_ascii_url(url, prepend_scheme):
+    '''
+    Converts the inputed unicode url into a US-ASCII equivalent. This function
+    goes a little beyond RFC 3490, which is limited in scope to the domain name
+    (authority) only. Here, the functionality is expanded to what was observed
+    on Wikipedia on 2009-Jan-22:
+
+       Component    Can Use Unicode?
+       ---------    ----------------
+       scheme       No
+       authority    Yes
+       path         Yes
+       query        Yes
+       fragment     No
+
+    The authority component gets converted to punycode, but occurrences of
+    unicode in other components get converted into a pair of URI escapes (we
+    assume 4-byte unicode). E.g. the unicode character U+4E2D will be
+    converted into '%4E%2D'. Testing with Firefox v3.0.5 has shown that it can
+    understand this kind of URI encoding.
+
+    :param url: unicode string, the URL to convert from unicode into US-ASCII
+    :param prepend_scheme: string, a protocol scheme to prepend to the URL if
+        we're having trouble parsing it.
+        e.g. "http". Input None to disable this functionality
+    :returns: a US-ASCII equivalent of the inputed url
+    :rtype: string
+
+    @author: Jonathan Benn
+    '''
+    #convert the authority component of the URL into an ASCII punycode string,
+    #but encode the rest using the regular URI character encoding
+
+    groups = url_split_regex.match(url).groups()
+    #If no authority was found
+    if not groups[3]:
+        #Try appending a scheme to see if that fixes the problem
+        scheme_to_prepend = prepend_scheme or 'http'
+        groups = url_split_regex.match(
+            unicode(scheme_to_prepend) + u'://' + url).groups()
+    #if we still can't find the authority
+    if not groups[3]:
+        raise Exception('No authority component found, '+ \
+            'could not decode unicode to US-ASCII')
+
+    #We're here if we found an authority, let's rebuild the URL
+    scheme = groups[1]
+    authority = groups[3]
+    path = groups[4] or ''
+    query = groups[5] or ''
+    fragment = groups[7] or ''
+
+    if prepend_scheme:
+        scheme = str(scheme) + '://'
+    else:
+        scheme = ''
+    return scheme + unicode_to_ascii_authority(authority) +\
+        escape_unicode(path) + escape_unicode(query) + str(fragment)
+
+
+class IS_GENERIC_URL(Validator):
+    """
+    Rejects a URL string if any of the following is true:
+       * The string is empty or None
+       * The string uses characters that are not allowed in a URL
+       * The URL scheme specified (if one is specified) is not valid
+
+    Based on RFC 2396: http://www.faqs.org/rfcs/rfc2396.html
+
+    This function only checks the URL's syntax. It does not check that the URL
+    points to a real document, for example, or that it otherwise makes sense
+    semantically. This function does automatically prepend 'http://' in front
+    of a URL if and only if that's necessary to successfully parse the URL.
+    Please note that a scheme will be prepended only for rare cases
+    (e.g. 'google.ca:80')
+
+    The list of allowed schemes is customizable with the allowed_schemes
+    parameter. If you exclude None from the list, then abbreviated URLs
+    (lacking a scheme such as 'http') will be rejected.
+
+    The default prepended scheme is customizable with the prepend_scheme
+    parameter. If you set prepend_scheme to None then prepending will be
+    disabled. URLs that require prepending to parse will still be accepted,
+    but the return value will not be modified.
+
+    @author: Jonathan Benn
+
+    >>> IS_GENERIC_URL()('http://user@abc.com')
+    ('http://user@abc.com', None)
+
+    """
+
+    def __init__(
+        self,
+        error_message='enter a valid URL',
+        allowed_schemes=None,
+        prepend_scheme=None,
+        ):
+        """
+        :param error_message: a string, the error message to give the end user
+            if the URL does not validate
+        :param allowed_schemes: a list containing strings or None. Each element
+            is a scheme the inputed URL is allowed to use
+        :param prepend_scheme: a string, this scheme is prepended if it's
+            necessary to make the URL valid
+        """
+
+        self.error_message = error_message
+        if allowed_schemes == None:
+            self.allowed_schemes = all_url_schemes
+        else:
+            self.allowed_schemes = allowed_schemes
+        self.prepend_scheme = prepend_scheme
+        if self.prepend_scheme not in self.allowed_schemes:
+            raise SyntaxError, \
+                "prepend_scheme='%s' is not in allowed_schemes=%s" \
+                % (self.prepend_scheme, self.allowed_schemes)
+
+    def __call__(self, value):
+        """
+        :param value: a string, the URL to validate
+        :returns: a tuple, where tuple[0] is the inputed value (possible
+            prepended with prepend_scheme), and tuple[1] is either
+            None (success!) or the string error_message
+        """
+        try:
+            # if the URL does not misuse the '%' character
+            if not re.compile(
+                r"%[^0-9A-Fa-f]{2}|%[^0-9A-Fa-f][0-9A-Fa-f]|%[0-9A-Fa-f][^0-9A-Fa-f]|%$|%[0-9A-Fa-f]$|%[^0-9A-Fa-f]$"
+                              ).search(value):
+                # if the URL is only composed of valid characters
+                if re.compile(
+                    r"[A-Za-z0-9;/?:@&=+$,\-_\.!~*'\(\)%#]+$").match(value):
+                    # Then split up the URL into its components and check on
+                    # the scheme
+                    scheme = url_split_regex.match(value).group(2)
+                    # Clean up the scheme before we check it
+                    if scheme != None:
+                        scheme = urllib.unquote(scheme).lower()
+                    # If the scheme really exists
+                    if scheme in self.allowed_schemes:
+                        # Then the URL is valid
+                        return (value, None)
+                    else:
+                        # else, for the possible case of abbreviated URLs with
+                        # ports, check to see if adding a valid scheme fixes
+                        # the problem (but only do this if it doesn't have
+                        # one already!)
+                        if not re.compile('://').search(value) and None\
+                             in self.allowed_schemes:
+                            schemeToUse = self.prepend_scheme or 'http'
+                            prependTest = self.__call__(schemeToUse
+                                     + '://' + value)
+                            # if the prepend test succeeded
+                            if prependTest[1] == None:
+                                # if prepending in the output is enabled
+                                if self.prepend_scheme:
+                                    return prependTest
+                                else:
+                                    # else return the original,
+                                    #  non-prepended value
+                                    return (value, None)
+        except:
+            pass
+        # else the URL is not valid
+        return (value, translate(self.error_message))
+
+# Sources (obtained 2008-Nov-11):
+#    http://en.wikipedia.org/wiki/Top-level_domain
+#    http://www.iana.org/domains/root/db/
+
+official_top_level_domains = [
+    'ac',
+    'ad',
+    'ae',
+    'aero',
+    'af',
+    'ag',
+    'ai',
+    'al',
+    'am',
+    'an',
+    'ao',
+    'aq',
+    'ar',
+    'arpa',
+    'as',
+    'asia',
+    'at',
+    'au',
+    'aw',
+    'ax',
+    'az',
+    'ba',
+    'bb',
+    'bd',
+    'be',
+    'bf',
+    'bg',
+    'bh',
+    'bi',
+    'biz',
+    'bj',
+    'bl',
+    'bm',
+    'bn',
+    'bo',
+    'br',
+    'bs',
+    'bt',
+    'bv',
+    'bw',
+    'by',
+    'bz',
+    'ca',
+    'cat',
+    'cc',
+    'cd',
+    'cf',
+    'cg',
+    'ch',
+    'ci',
+    'ck',
+    'cl',
+    'cm',
+    'cn',
+    'co',
+    'com',
+    'coop',
+    'cr',
+    'cu',
+    'cv',
+    'cx',
+    'cy',
+    'cz',
+    'de',
+    'dj',
+    'dk',
+    'dm',
+    'do',
+    'dz',
+    'ec',
+    'edu',
+    'ee',
+    'eg',
+    'eh',
+    'er',
+    'es',
+    'et',
+    'eu',
+    'example',
+    'fi',
+    'fj',
+    'fk',
+    'fm',
+    'fo',
+    'fr',
+    'ga',
+    'gb',
+    'gd',
+    'ge',
+    'gf',
+    'gg',
+    'gh',
+    'gi',
+    'gl',
+    'gm',
+    'gn',
+    'gov',
+    'gp',
+    'gq',
+    'gr',
+    'gs',
+    'gt',
+    'gu',
+    'gw',
+    'gy',
+    'hk',
+    'hm',
+    'hn',
+    'hr',
+    'ht',
+    'hu',
+    'id',
+    'ie',
+    'il',
+    'im',
+    'in',
+    'info',
+    'int',
+    'invalid',
+    'io',
+    'iq',
+    'ir',
+    'is',
+    'it',
+    'je',
+    'jm',
+    'jo',
+    'jobs',
+    'jp',
+    'ke',
+    'kg',
+    'kh',
+    'ki',
+    'km',
+    'kn',
+    'kp',
+    'kr',
+    'kw',
+    'ky',
+    'kz',
+    'la',
+    'lb',
+    'lc',
+    'li',
+    'lk',
+    'localhost',
+    'lr',
+    'ls',
+    'lt',
+    'lu',
+    'lv',
+    'ly',
+    'ma',
+    'mc',
+    'md',
+    'me',
+    'mf',
+    'mg',
+    'mh',
+    'mil',
+    'mk',
+    'ml',
+    'mm',
+    'mn',
+    'mo',
+    'mobi',
+    'mp',
+    'mq',
+    'mr',
+    'ms',
+    'mt',
+    'mu',
+    'museum',
+    'mv',
+    'mw',
+    'mx',
+    'my',
+    'mz',
+    'na',
+    'name',
+    'nc',
+    'ne',
+    'net',
+    'nf',
+    'ng',
+    'ni',
+    'nl',
+    'no',
+    'np',
+    'nr',
+    'nu',
+    'nz',
+    'om',
+    'org',
+    'pa',
+    'pe',
+    'pf',
+    'pg',
+    'ph',
+    'pk',
+    'pl',
+    'pm',
+    'pn',
+    'pr',
+    'pro',
+    'ps',
+    'pt',
+    'pw',
+    'py',
+    'qa',
+    're',
+    'ro',
+    'rs',
+    'ru',
+    'rw',
+    'sa',
+    'sb',
+    'sc',
+    'sd',
+    'se',
+    'sg',
+    'sh',
+    'si',
+    'sj',
+    'sk',
+    'sl',
+    'sm',
+    'sn',
+    'so',
+    'sr',
+    'st',
+    'su',
+    'sv',
+    'sy',
+    'sz',
+    'tc',
+    'td',
+    'tel',
+    'test',
+    'tf',
+    'tg',
+    'th',
+    'tj',
+    'tk',
+    'tl',
+    'tm',
+    'tn',
+    'to',
+    'tp',
+    'tr',
+    'travel',
+    'tt',
+    'tv',
+    'tw',
+    'tz',
+    'ua',
+    'ug',
+    'uk',
+    'um',
+    'us',
+    'uy',
+    'uz',
+    'va',
+    'vc',
+    've',
+    'vg',
+    'vi',
+    'vn',
+    'vu',
+    'wf',
+    'ws',
+    'xn--0zwm56d',
+    'xn--11b5bs3a9aj6g',
+    'xn--80akhbyknj4f',
+    'xn--9t4b11yi5a',
+    'xn--deba0ad',
+    'xn--g6w251d',
+    'xn--hgbk6aj7f53bba',
+    'xn--hlcj6aya9esc7a',
+    'xn--jxalpdlp',
+    'xn--kgbechtv',
+    'xn--zckzah',
+    'ye',
+    'yt',
+    'yu',
+    'za',
+    'zm',
+    'zw',
+    ]
+
+
+class IS_HTTP_URL(Validator):
+    """
+    Rejects a URL string if any of the following is true:
+       * The string is empty or None
+       * The string uses characters that are not allowed in a URL
+       * The string breaks any of the HTTP syntactic rules
+       * The URL scheme specified (if one is specified) is not 'http' or 'https'
+       * The top-level domain (if a host name is specified) does not exist
+
+    Based on RFC 2616: http://www.faqs.org/rfcs/rfc2616.html
+
+    This function only checks the URL's syntax. It does not check that the URL
+    points to a real document, for example, or that it otherwise makes sense
+    semantically. This function does automatically prepend 'http://' in front
+    of a URL in the case of an abbreviated URL (e.g. 'google.ca').
+
+    The list of allowed schemes is customizable with the allowed_schemes
+    parameter. If you exclude None from the list, then abbreviated URLs
+    (lacking a scheme such as 'http') will be rejected.
+
+    The default prepended scheme is customizable with the prepend_scheme
+    parameter. If you set prepend_scheme to None then prepending will be
+    disabled. URLs that require prepending to parse will still be accepted,
+    but the return value will not be modified.
+
+    @author: Jonathan Benn
+
+    >>> IS_HTTP_URL()('http://1.2.3.4')
+    ('http://1.2.3.4', None)
+    >>> IS_HTTP_URL()('http://abc.com')
+    ('http://abc.com', None)
+    >>> IS_HTTP_URL()('https://abc.com')
+    ('https://abc.com', None)
+    >>> IS_HTTP_URL()('httpx://abc.com')
+    ('httpx://abc.com', 'enter a valid URL')
+    >>> IS_HTTP_URL()('http://abc.com:80')
+    ('http://abc.com:80', None)
+    >>> IS_HTTP_URL()('http://user@abc.com')
+    ('http://user@abc.com', None)
+    >>> IS_HTTP_URL()('http://user@1.2.3.4')
+    ('http://user@1.2.3.4', None)
+
+    """
+
+    def __init__(
+        self,
+        error_message='enter a valid URL',
+        allowed_schemes=None,
+        prepend_scheme='http',
+        ):
+        """
+        :param error_message: a string, the error message to give the end user
+            if the URL does not validate
+        :param allowed_schemes: a list containing strings or None. Each element
+            is a scheme the inputed URL is allowed to use
+        :param prepend_scheme: a string, this scheme is prepended if it's
+            necessary to make the URL valid
+        """
+
+        self.error_message = error_message
+        if allowed_schemes == None:
+            self.allowed_schemes = http_schemes
+        else:
+            self.allowed_schemes = allowed_schemes
+        self.prepend_scheme = prepend_scheme
+
+        for i in self.allowed_schemes:
+            if i not in http_schemes:
+                raise SyntaxError, \
+                    "allowed_scheme value '%s' is not in %s" % \
+                    (i, http_schemes)
+
+        if self.prepend_scheme not in self.allowed_schemes:
+            raise SyntaxError, \
+                "prepend_scheme='%s' is not in allowed_schemes=%s" % \
+                (self.prepend_scheme, self.allowed_schemes)
+
+    def __call__(self, value):
+        """
+        :param value: a string, the URL to validate
+        :returns: a tuple, where tuple[0] is the inputed value
+            (possible prepended with prepend_scheme), and tuple[1] is either
+            None (success!) or the string error_message
+        """
+
+        try:
+            # if the URL passes generic validation
+            x = IS_GENERIC_URL(error_message=self.error_message,
+                               allowed_schemes=self.allowed_schemes,
+                               prepend_scheme=self.prepend_scheme)
+            if x(value)[1] == None:
+                componentsMatch = url_split_regex.match(value)
+                authority = componentsMatch.group(4)
+                # if there is an authority component
+                if authority:
+                    # if authority is a valid IP address
+                    if re.compile(
+                        "([\w.!~*'|;:&=+$,-]+@)?\d+\.\d+\.\d+\.\d+(:\d*)*$").match(authority):
+                        # Then this HTTP URL is valid
+                        return (value, None)
+                    else:
+                        # else if authority is a valid domain name
+                        domainMatch = \
+                            re.compile(
+                                "([\w.!~*'|;:&=+$,-]+@)?(([A-Za-z0-9]+[A-Za-z0-9\-]*[A-Za-z0-9]+\.)*([A-Za-z0-9]+\.)*)*([A-Za-z]+[A-Za-z0-9\-]*[A-Za-z0-9]+)\.?(:\d*)*$"
+                                ).match(authority)
+                        if domainMatch:
+                            # if the top-level domain really exists
+                            if domainMatch.group(5).lower()\
+                                 in official_top_level_domains:
+                                # Then this HTTP URL is valid
+                                return (value, None)
+                else:
+                    # else this is a relative/abbreviated URL, which will parse
+                    # into the URL's path component
+                    path = componentsMatch.group(5)
+                    # relative case: if this is a valid path (if it starts with
+                    # a slash)
+                    if re.compile('/').match(path):
+                        # Then this HTTP URL is valid
+                        return (value, None)
+                    else:
+                        # abbreviated case: if we haven't already, prepend a
+                        # scheme and see if it fixes the problem
+                        if not re.compile('://').search(value):
+                            schemeToUse = self.prepend_scheme or 'http'
+                            prependTest = self.__call__(schemeToUse
+                                     + '://' + value)
+                            # if the prepend test succeeded
+                            if prependTest[1] == None:
+                                # if prepending in the output is enabled
+                                if self.prepend_scheme:
+                                    return prependTest
+                                else:
+                                    # else return the original, non-prepended
+                                    # value
+                                    return (value, None)
+        except:
+            pass
+        # else the HTTP URL is not valid
+        return (value, translate(self.error_message))
+
+
+class IS_URL(Validator):
+    """
+    Rejects a URL string if any of the following is true:
+       * The string is empty or None
+       * The string uses characters that are not allowed in a URL
+       * The string breaks any of the HTTP syntactic rules
+       * The URL scheme specified (if one is specified) is not 'http' or 'https'
+       * The top-level domain (if a host name is specified) does not exist
+
+    (These rules are based on RFC 2616: http://www.faqs.org/rfcs/rfc2616.html)
+
+    This function only checks the URL's syntax. It does not check that the URL
+    points to a real document, for example, or that it otherwise makes sense
+    semantically. This function does automatically prepend 'http://' in front
+    of a URL in the case of an abbreviated URL (e.g. 'google.ca').
+
+    If the parameter mode='generic' is used, then this function's behavior
+    changes. It then rejects a URL string if any of the following is true:
+       * The string is empty or None
+       * The string uses characters that are not allowed in a URL
+       * The URL scheme specified (if one is specified) is not valid
+
+    (These rules are based on RFC 2396: http://www.faqs.org/rfcs/rfc2396.html)
+
+    The list of allowed schemes is customizable with the allowed_schemes
+    parameter. If you exclude None from the list, then abbreviated URLs
+    (lacking a scheme such as 'http') will be rejected.
+
+    The default prepended scheme is customizable with the prepend_scheme
+    parameter. If you set prepend_scheme to None then prepending will be
+    disabled. URLs that require prepending to parse will still be accepted,
+    but the return value will not be modified.
+
+    IS_URL is compatible with the Internationalized Domain Name (IDN) standard
+    specified in RFC 3490 (http://tools.ietf.org/html/rfc3490). As a result,
+    URLs can be regular strings or unicode strings.
+    If the URL's domain component (e.g. google.ca) contains non-US-ASCII
+    letters, then the domain will be converted into Punycode (defined in
+    RFC 3492, http://tools.ietf.org/html/rfc3492). IS_URL goes a bit beyond
+    the standards, and allows non-US-ASCII characters to be present in the path
+    and query components of the URL as well. These non-US-ASCII characters will
+    be escaped using the standard '%20' type syntax. e.g. the unicode
+    character with hex code 0x4e86 will become '%4e%86'
+
+    Code Examples::
+
+        INPUT(_type='text', _name='name', requires=IS_URL())
+        >>> IS_URL()('abc.com')
+        ('http://abc.com', None)
+
+        INPUT(_type='text', _name='name', requires=IS_URL(mode='generic'))
+        >>> IS_URL(mode='generic')('abc.com')
+        ('abc.com', None)
+
+        INPUT(_type='text', _name='name',
+            requires=IS_URL(allowed_schemes=['https'], prepend_scheme='https'))
+        >>> IS_URL(allowed_schemes=['https'], prepend_scheme='https')('https://abc.com')
+        ('https://abc.com', None)
+
+        INPUT(_type='text', _name='name',
+            requires=IS_URL(prepend_scheme='https'))
+        >>> IS_URL(prepend_scheme='https')('abc.com')
+        ('https://abc.com', None)
+
+        INPUT(_type='text', _name='name',
+            requires=IS_URL(mode='generic', allowed_schemes=['ftps', 'https'],
+                prepend_scheme='https'))
+        >>> IS_URL(mode='generic', allowed_schemes=['ftps', 'https'], prepend_scheme='https')('https://abc.com')
+        ('https://abc.com', None)
+        >>> IS_URL(mode='generic', allowed_schemes=['ftps', 'https', None], prepend_scheme='https')('abc.com')
+        ('abc.com', None)
+
+    @author: Jonathan Benn
+    """
+
+    def __init__(
+        self,
+        error_message='enter a valid URL',
+        mode='http',
+        allowed_schemes=None,
+        prepend_scheme='http',
+        ):
+        """
+        :param error_message: a string, the error message to give the end user
+            if the URL does not validate
+        :param allowed_schemes: a list containing strings or None. Each element
+            is a scheme the inputed URL is allowed to use
+        :param prepend_scheme: a string, this scheme is prepended if it's
+            necessary to make the URL valid
+        """
+
+        self.error_message = error_message
+        self.mode = mode.lower()
+        if not self.mode in ['generic', 'http']:
+            raise SyntaxError, "invalid mode '%s' in IS_URL" % self.mode
+        self.allowed_schemes = allowed_schemes
+
+        if self.allowed_schemes:
+            if prepend_scheme not in self.allowed_schemes:
+                raise SyntaxError, \
+                    "prepend_scheme='%s' is not in allowed_schemes=%s" \
+                    % (prepend_scheme, self.allowed_schemes)
+
+        # if allowed_schemes is None, then we will defer testing
+        # prepend_scheme's validity to a sub-method
+
+        self.prepend_scheme = prepend_scheme
+
+    def __call__(self, value):
+        """
+        :param value: a unicode or regular string, the URL to validate
+        :returns: a (string, string) tuple, where tuple[0] is the modified
+            input value and tuple[1] is either None (success!) or the
+            string error_message. The input value will never be modified in the
+            case of an error. However, if there is success then the input URL
+            may be modified to (1) prepend a scheme, and/or (2) convert a
+            non-compliant unicode URL into a compliant US-ASCII version.
+        """
+
+        if self.mode == 'generic':
+            subMethod = IS_GENERIC_URL(error_message=self.error_message,
+                                       allowed_schemes=self.allowed_schemes,
+                                       prepend_scheme=self.prepend_scheme)
+        elif self.mode == 'http':
+            subMethod = IS_HTTP_URL(error_message=self.error_message,
+                                    allowed_schemes=self.allowed_schemes,
+                                    prepend_scheme=self.prepend_scheme)
+        else:
+            raise SyntaxError, "invalid mode '%s' in IS_URL" % self.mode
+
+        if type(value) != unicode:
+            return subMethod(value)
+        else:
+            try:
+                asciiValue = unicode_to_ascii_url(value, self.prepend_scheme)
+            except Exception:
+                #If we are not able to convert the unicode url into a
+                # US-ASCII URL, then the URL is not valid
+                return (value, translate(self.error_message))
+
+            methodResult = subMethod(asciiValue)
+            #if the validation of the US-ASCII version of the value failed
+            if methodResult[1] != None:
+                # then return the original input value, not the US-ASCII version
+                return (value, methodResult[1])
+            else:
+                return methodResult
+
+
+regex_time = re.compile(
+    '((?P[0-9]+))([^0-9 ]+(?P[0-9 ]+))?([^0-9ap ]+(?P[0-9]*))?((?P[ap]m))?')
+
+
+class IS_TIME(Validator):
+    """
+    example::
+
+        INPUT(_type='text', _name='name', requires=IS_TIME())
+
+    understands the following formats
+    hh:mm:ss [am/pm]
+    hh:mm [am/pm]
+    hh [am/pm]
+
+    [am/pm] is optional, ':' can be replaced by any other non-space non-digit
+
+        >>> IS_TIME()('21:30')
+        (datetime.time(21, 30), None)
+        >>> IS_TIME()('21-30')
+        (datetime.time(21, 30), None)
+        >>> IS_TIME()('21.30')
+        (datetime.time(21, 30), None)
+        >>> IS_TIME()('21:30:59')
+        (datetime.time(21, 30, 59), None)
+        >>> IS_TIME()('5:30')
+        (datetime.time(5, 30), None)
+        >>> IS_TIME()('5:30 am')
+        (datetime.time(5, 30), None)
+        >>> IS_TIME()('5:30 pm')
+        (datetime.time(17, 30), None)
+        >>> IS_TIME()('5:30 whatever')
+        ('5:30 whatever', 'enter time as hh:mm:ss (seconds, am, pm optional)')
+        >>> IS_TIME()('5:30 20')
+        ('5:30 20', 'enter time as hh:mm:ss (seconds, am, pm optional)')
+        >>> IS_TIME()('24:30')
+        ('24:30', 'enter time as hh:mm:ss (seconds, am, pm optional)')
+        >>> IS_TIME()('21:60')
+        ('21:60', 'enter time as hh:mm:ss (seconds, am, pm optional)')
+        >>> IS_TIME()('21:30::')
+        ('21:30::', 'enter time as hh:mm:ss (seconds, am, pm optional)')
+        >>> IS_TIME()('')
+        ('', 'enter time as hh:mm:ss (seconds, am, pm optional)')
+    """
+
+    def __init__(self, error_message='enter time as hh:mm:ss (seconds, am, pm optional)'):
+        self.error_message = error_message
+
+    def __call__(self, value):
+        try:
+            ivalue = value
+            value = regex_time.match(value.lower())
+            (h, m, s) = (int(value.group('h')), 0, 0)
+            if value.group('m') != None:
+                m = int(value.group('m'))
+            if value.group('s') != None:
+                s = int(value.group('s'))
+            if value.group('d') == 'pm' and 0 < h < 12:
+                h = h + 12
+            if not (h in range(24) and m in range(60) and s
+                     in range(60)):
+                raise ValueError\
+                    ('Hours or minutes or seconds are outside of allowed range')
+            value = datetime.time(h, m, s)
+            return (value, None)
+        except AttributeError:
+            pass
+        except ValueError:
+            pass
+        return (ivalue, translate(self.error_message))
+
+
+class IS_DATE(Validator):
+    """
+    example::
+
+        INPUT(_type='text', _name='name', requires=IS_DATE())
+
+    date has to be in the ISO8960 format YYYY-MM-DD
+    """
+
+    def __init__(self, format='%Y-%m-%d',
+                 error_message='enter date as %(format)s'):
+        self.format = str(format)
+        self.error_message = str(error_message)
+
+    def __call__(self, value):
+        if isinstance(value,datetime.date):
+            return (value,None)
+        try:
+            (y, m, d, hh, mm, ss, t0, t1, t2) = \
+                time.strptime(value, str(self.format))
+            value = datetime.date(y, m, d)
+            return (value, None)
+        except:
+            return (value, translate(self.error_message) % IS_DATETIME.nice(self.format))
+
+    def formatter(self, value):
+        format = self.format
+        year = value.year
+        y = '%.4i' % year
+        format = format.replace('%y',y[-2:])
+        format = format.replace('%Y',y)
+        if year<1900:
+            year = 2000
+        d = datetime.date(year,value.month,value.day)
+        return d.strftime(format)
+
+
+class IS_DATETIME(Validator):
+    """
+    example::
+
+        INPUT(_type='text', _name='name', requires=IS_DATETIME())
+
+    datetime has to be in the ISO8960 format YYYY-MM-DD hh:mm:ss
+    """
+
+    isodatetime = '%Y-%m-%d %H:%M:%S'
+
+    @staticmethod
+    def nice(format):
+        code=(('%Y','1963'),
+              ('%y','63'),
+              ('%d','28'),
+              ('%m','08'),
+              ('%b','Aug'),
+              ('%b','August'),
+              ('%H','14'),
+              ('%I','02'),
+              ('%p','PM'),
+              ('%M','30'),
+              ('%S','59'))
+        for (a,b) in code:
+            format=format.replace(a,b)
+        return dict(format=format)
+
+    def __init__(self, format='%Y-%m-%d %H:%M:%S',
+                 error_message='enter date and time as %(format)s'):
+        self.format = str(format)
+        self.error_message = str(error_message)
+
+    def __call__(self, value):
+        if isinstance(value,datetime.datetime):
+            return (value,None)
+        try:
+            (y, m, d, hh, mm, ss, t0, t1, t2) = \
+                time.strptime(value, str(self.format))
+            value = datetime.datetime(y, m, d, hh, mm, ss)
+            return (value, None)
+        except:
+            return (value, translate(self.error_message) % IS_DATETIME.nice(self.format))
+
+    def formatter(self, value):
+        format = self.format
+        year = value.year
+        y = '%.4i' % year
+        format = format.replace('%y',y[-2:])
+        format = format.replace('%Y',y)
+        if year<1900:
+            year = 2000
+        d = datetime.datetime(year,value.month,value.day,value.hour,value.minute,value.second)
+        return d.strftime(format)
+
+class IS_DATE_IN_RANGE(IS_DATE):
+    """
+    example::
+
+        >>> v = IS_DATE_IN_RANGE(minimum=datetime.date(2008,1,1), \
+                                 maximum=datetime.date(2009,12,31), \
+                                 format="%m/%d/%Y",error_message="oops")
+
+        >>> v('03/03/2008')
+        (datetime.date(2008, 3, 3), None)
+
+        >>> v('03/03/2010')
+        (datetime.date(2010, 3, 3), 'oops')
+
+        >>> v(datetime.date(2008,3,3))
+        (datetime.date(2008, 3, 3), None)
+
+        >>> v(datetime.date(2010,3,3))
+        (datetime.date(2010, 3, 3), 'oops')
+
+    """
+    def __init__(self,
+                 minimum = None,
+                 maximum = None,
+                 format='%Y-%m-%d',
+                 error_message = None):
+        self.minimum = minimum
+        self.maximum = maximum
+        if error_message is None:
+            if minimum is None:
+                error_message = "enter date on or before %(max)s"
+            elif maximum is None:
+                error_message = "enter date on or after %(min)s"
+            else:
+                error_message = "enter date in range %(min)s %(max)s"
+        d = dict(min=minimum, max=maximum)
+        IS_DATE.__init__(self,
+                         format = format,
+                         error_message = error_message % d)
+
+    def __call__(self, value):
+        (value, msg) = IS_DATE.__call__(self,value)
+        if msg is not None:
+            return (value, msg)
+        if self.minimum and self.minimum > value:
+            return (value, translate(self.error_message))
+        if self.maximum and value > self.maximum:
+            return (value, translate(self.error_message))
+        return (value, None)
+
+
+class IS_DATETIME_IN_RANGE(IS_DATETIME):
+    """
+    example::
+
+        >>> v = IS_DATETIME_IN_RANGE(\
+                minimum=datetime.datetime(2008,1,1,12,20), \
+                maximum=datetime.datetime(2009,12,31,12,20), \
+                format="%m/%d/%Y %H:%M",error_message="oops")
+        >>> v('03/03/2008 12:40')
+        (datetime.datetime(2008, 3, 3, 12, 40), None)
+
+        >>> v('03/03/2010 10:34')
+        (datetime.datetime(2010, 3, 3, 10, 34), 'oops')
+
+        >>> v(datetime.datetime(2008,3,3,0,0))
+        (datetime.datetime(2008, 3, 3, 0, 0), None)
+
+        >>> v(datetime.datetime(2010,3,3,0,0))
+        (datetime.datetime(2010, 3, 3, 0, 0), 'oops')
+    """
+    def __init__(self,
+                 minimum = None,
+                 maximum = None,
+                 format = '%Y-%m-%d %H:%M:%S',
+                 error_message = None):
+        self.minimum = minimum
+        self.maximum = maximum
+        if error_message is None:
+            if minimum is None:
+                error_message = "enter date and time on or before %(max)s"
+            elif maximum is None:
+                error_message = "enter date and time on or after %(min)s"
+            else:
+                error_message = "enter date and time in range %(min)s %(max)s"
+        d = dict(min = minimum, max = maximum)
+        IS_DATETIME.__init__(self,
+                         format = format,
+                         error_message = error_message % d)
+
+    def __call__(self, value):
+        (value, msg) = IS_DATETIME.__call__(self, value)
+        if msg is not None:
+            return (value, msg)
+        if self.minimum and self.minimum > value:
+            return (value, translate(self.error_message))
+        if self.maximum and value > self.maximum:
+            return (value, translate(self.error_message))
+        return (value, None)
+
+
+class IS_LIST_OF(Validator):
+
+    def __init__(self, other):
+        self.other = other
+
+    def __call__(self, value):
+        ivalue = value
+        if not isinstance(value, list):
+            ivalue = [ivalue]
+        new_value = []
+        for item in ivalue:
+            (v, e) = self.other(item)
+            if e:
+                return (value, e)
+            else:
+                new_value.append(v)
+        return (new_value, None)
+
+
+class IS_LOWER(Validator):
+    """
+    convert to lower case
+
+    >>> IS_LOWER()('ABC')
+    ('abc', None)
+    >>> IS_LOWER()('Ñ')
+    ('\\xc3\\xb1', None)
+    """
+
+    def __call__(self, value):
+        return (value.decode('utf8').lower().encode('utf8'), None)
+
+
+class IS_UPPER(Validator):
+    """
+    convert to upper case
+
+    >>> IS_UPPER()('abc')
+    ('ABC', None)
+    >>> IS_UPPER()('ñ')
+    ('\\xc3\\x91', None)
+    """
+
+    def __call__(self, value):
+        return (value.decode('utf8').upper().encode('utf8'), None)
+
+
+def urlify(value, maxlen=80, keep_underscores=False):
+    """
+    Convert incoming string to a simplified ASCII subset.
+    if (keep_underscores): underscores are retained in the string
+    else: underscores are translated to hyphens (default)
+    """
+    s = value.lower()                     # to lowercase
+    s = s.decode('utf-8')                 # to utf-8
+    s = unicodedata.normalize('NFKD', s)  # normalize eg è => e, ñ => n
+    s = s.encode('ASCII', 'ignore')       # encode as ASCII
+    s = re.sub('&\w+;', '', s)            # strip html entities
+    if keep_underscores:
+        s = re.sub('\s+', '-', s)         # whitespace to hyphens
+        s = re.sub('[^\w\-]', '', s)      # strip all but alphanumeric/underscore/hyphen
+    else:
+        s = re.sub('[\s_]+', '-', s)      # whitespace & underscores to hyphens
+        s = re.sub('[^a-z0-9\-]', '', s)  # strip all but alphanumeric/hyphen
+    s = re.sub('[-_][-_]+', '-', s)       # collapse strings of hyphens
+    s = s.strip('-')                      # remove leading and trailing hyphens
+    return s[:maxlen]                     # enforce maximum length
+
+
+class IS_SLUG(Validator):
+    """
+    convert arbitrary text string to a slug
+
+    >>> IS_SLUG()('abc123')
+    ('abc123', None)
+    >>> IS_SLUG()('ABC123')
+    ('abc123', None)
+    >>> IS_SLUG()('abc-123')
+    ('abc-123', None)
+    >>> IS_SLUG()('abc--123')
+    ('abc-123', None)
+    >>> IS_SLUG()('abc 123')
+    ('abc-123', None)
+    >>> IS_SLUG()('abc\t_123')
+    ('abc-123', None)
+    >>> IS_SLUG()('-abc-')
+    ('abc', None)
+    >>> IS_SLUG()('--a--b--_ -c--')
+    ('a-b-c', None)
+    >>> IS_SLUG()('abc&123')
+    ('abc123', None)
+    >>> IS_SLUG()('abc&123&def')
+    ('abc123def', None)
+    >>> IS_SLUG()('ñ')
+    ('n', None)
+    >>> IS_SLUG(maxlen=4)('abc123')
+    ('abc1', None)
+    >>> IS_SLUG()('abc_123')
+    ('abc-123', None)
+    >>> IS_SLUG(keep_underscores=False)('abc_123')
+    ('abc-123', None)
+    >>> IS_SLUG(keep_underscores=True)('abc_123')
+    ('abc_123', None)
+    >>> IS_SLUG(check=False)('abc')
+    ('abc', None)
+    >>> IS_SLUG(check=True)('abc')
+    ('abc', None)
+    >>> IS_SLUG(check=False)('a bc')
+    ('a-bc', None)
+    >>> IS_SLUG(check=True)('a bc')
+    ('a bc', 'must be slug')
+    """
+
+    @staticmethod
+    def urlify(value, maxlen=80, keep_underscores=False):
+        return urlify(value, maxlen, keep_underscores)
+
+    def __init__(self, maxlen=80, check=False, error_message='must be slug', keep_underscores=False):
+        self.maxlen = maxlen
+        self.check = check
+        self.error_message = error_message
+        self.keep_underscores = keep_underscores
+
+    def __call__(self, value):
+        if self.check and value != urlify(value, self.maxlen, self.keep_underscores):
+            return (value, translate(self.error_message))
+        return (urlify(value,self.maxlen, self.keep_underscores), None)
+
+class IS_EMPTY_OR(Validator):
+    """
+    dummy class for testing IS_EMPTY_OR
+
+    >>> IS_EMPTY_OR(IS_EMAIL())('abc@def.com')
+    ('abc@def.com', None)
+    >>> IS_EMPTY_OR(IS_EMAIL())('   ')
+    (None, None)
+    >>> IS_EMPTY_OR(IS_EMAIL(), null='abc')('   ')
+    ('abc', None)
+    >>> IS_EMPTY_OR(IS_EMAIL(), null='abc', empty_regex='def')('def')
+    ('abc', None)
+    >>> IS_EMPTY_OR(IS_EMAIL())('abc')
+    ('abc', 'enter a valid email address')
+    >>> IS_EMPTY_OR(IS_EMAIL())(' abc ')
+    ('abc', 'enter a valid email address')
+    """
+
+    def __init__(self, other, null=None, empty_regex=None):
+        (self.other, self.null) = (other, null)
+        if empty_regex is not None:
+            self.empty_regex = re.compile(empty_regex)
+        else:
+            self.empty_regex = None
+        if hasattr(other, 'multiple'):
+            self.multiple = other.multiple
+        if hasattr(other, 'options'):
+            self.options=self._options
+
+    def _options(self):
+        options = self.other.options()
+        if (not options or options[0][0]!='') and not self.multiple:
+            options.insert(0,('',''))
+        return options
+
+    def set_self_id(self, id):
+        if isinstance(self.other, (list, tuple)):
+            for item in self.other:
+                if hasattr(item, 'set_self_id'):
+                    item.set_self_id(id)
+        else:
+            if hasattr(self.other, 'set_self_id'):
+                self.other.set_self_id(id)
+
+    def __call__(self, value):
+        value, empty = is_empty(value, empty_regex=self.empty_regex)
+        if empty:
+            return (self.null, None)
+        if isinstance(self.other, (list, tuple)):
+            for item in self.other:
+                value, error = item(value)
+                if error: break
+            return value, error
+        else:
+            return self.other(value)
+
+    def formatter(self, value):
+        if hasattr(self.other, 'formatter'):
+            return self.other.formatter(value)
+        return value
+
+IS_NULL_OR = IS_EMPTY_OR    # for backward compatibility
+
+
+class CLEANUP(Validator):
+    """
+    example::
+
+        INPUT(_type='text', _name='name', requires=CLEANUP())
+
+    removes special characters on validation
+    """
+
+    def __init__(self, regex='[^\x09\x0a\x0d\x20-\x7e]'):
+        self.regex = re.compile(regex)
+
+    def __call__(self, value):
+        v = self.regex.sub('',str(value).strip())
+        return (v, None)
+
+
+class CRYPT(object):
+    """
+    example::
+
+        INPUT(_type='text', _name='name', requires=CRYPT())
+
+    encodes the value on validation with a digest.
+
+    If no arguments are provided CRYPT uses the MD5 algorithm.
+    If the key argument is provided the HMAC+MD5 algorithm is used.
+    If the digest_alg is specified this is used to replace the
+    MD5 with, for example, SHA512. The digest_alg can be
+    the name of a hashlib algorithm as a string or the algorithm itself.
+    """
+
+    def __init__(self, key=None, digest_alg='md5'):
+        self.key = key
+        self.digest_alg = digest_alg
+
+    def __call__(self, value):
+        if self.key:
+            return (hmac_hash(value, self.key, self.digest_alg), None)
+        else:
+            return (simple_hash(value, self.digest_alg), None)
+
+
+class IS_STRONG(object):
+    """
+    example::
+
+        INPUT(_type='password', _name='passwd',
+            requires=IS_STRONG(min=10, special=2, upper=2))
+
+    enforces complexity requirements on a field
+    """
+
+    def __init__(self, min=8, max=20, upper=1, lower=1, number=1,
+                 special=1, specials=r'~!@#$%^&*()_+-=?<>,.:;{}[]|',
+                 invalid=' "', error_message=None):
+        self.min = min
+        self.max = max
+        self.upper = upper
+        self.lower = lower
+        self.number = number
+        self.special = special
+        self.specials = specials
+        self.invalid = invalid
+        self.error_message = error_message
+
+    def __call__(self, value):
+        failures = []
+        if type(self.min) == int and self.min > 0:
+            if not len(value) >= self.min:
+                failures.append("Minimum length is %s" % self.min)
+        if type(self.max) == int and self.max > 0:
+            if not len(value) <= self.max:
+                failures.append("Maximum length is %s" % self.max)
+        if type(self.special) == int:
+            all_special = [ch in value for ch in self.specials]
+            if self.special > 0:
+                if not all_special.count(True) >= self.special:
+                    failures.append("Must include at least %s of the following : %s" % (self.special, self.specials))
+        if self.invalid:
+            all_invalid = [ch in value for ch in self.invalid]
+            if all_invalid.count(True) > 0:
+                failures.append("May not contain any of the following: %s" \
+                    % self.invalid)
+        if type(self.upper) == int:
+            all_upper = re.findall("[A-Z]", value)
+            if self.upper > 0:
+                if not len(all_upper) >= self.upper:
+                    failures.append("Must include at least %s upper case" \
+                        % str(self.upper))
+            else:
+                if len(all_upper) > 0:
+                    failures.append("May not include any upper case letters")
+        if type(self.lower) == int:
+            all_lower = re.findall("[a-z]", value)
+            if self.lower > 0:
+                if not len(all_lower) >= self.lower:
+                    failures.append("Must include at least %s lower case" \
+                        % str(self.lower))
+            else:
+                if len(all_lower) > 0:
+                    failures.append("May not include any lower case letters")
+        if type(self.number) == int:
+            all_number = re.findall("[0-9]", value)
+            if self.number > 0:
+                numbers = "number"
+                if self.number > 1:
+                    numbers = "numbers"
+                if not len(all_number) >= self.number:
+                    failures.append("Must include at least %s %s" \
+                        % (str(self.number), numbers))
+            else:
+                if len(all_number) > 0:
+                    failures.append("May not include any numbers")
+        if len(failures) == 0:
+            return (value, None)
+        if not translate(self.error_message):
+            from html import XML
+            return (value, XML('
    '.join(failures)))
+        else:
+            return (value, translate(self.error_message))
+
+
+class IS_IN_SUBSET(IS_IN_SET):
+
+    def __init__(self, *a, **b):
+        IS_IN_SET.__init__(self, *a, **b)
+
+    def __call__(self, value):
+        values = re.compile("\w+").findall(str(value))
+        failures = [x for x in values if IS_IN_SET.__call__(self, x)[1]]
+        if failures:
+            return (value, translate(self.error_message))
+        return (value, None)
+
+
+class IS_IMAGE(Validator):
+    """
+    Checks if file uploaded through file input was saved in one of selected
+    image formats and has dimensions (width and height) within given boundaries.
+
+    Does *not* check for maximum file size (use IS_LENGTH for that). Returns
+    validation failure if no data was uploaded.
+
+    Supported file formats: BMP, GIF, JPEG, PNG.
+
+    Code parts taken from
+    http://mail.python.org/pipermail/python-list/2007-June/617126.html
+
+    Arguments:
+
+    extensions: iterable containing allowed *lowercase* image file extensions
+    ('jpg' extension of uploaded file counts as 'jpeg')
+    maxsize: iterable containing maximum width and height of the image
+    minsize: iterable containing minimum width and height of the image
+
+    Use (-1, -1) as minsize to pass image size check.
+
+    Examples::
+
+        #Check if uploaded file is in any of supported image formats:
+        INPUT(_type='file', _name='name', requires=IS_IMAGE())
+
+        #Check if uploaded file is either JPEG or PNG:
+        INPUT(_type='file', _name='name',
+            requires=IS_IMAGE(extensions=('jpeg', 'png')))
+
+        #Check if uploaded file is PNG with maximum size of 200x200 pixels:
+        INPUT(_type='file', _name='name',
+            requires=IS_IMAGE(extensions=('png'), maxsize=(200, 200)))
+    """
+
+    def __init__(self,
+                 extensions=('bmp', 'gif', 'jpeg', 'png'),
+                 maxsize=(10000, 10000),
+                 minsize=(0, 0),
+                 error_message='invalid image'):
+
+        self.extensions = extensions
+        self.maxsize = maxsize
+        self.minsize = minsize
+        self.error_message = error_message
+
+    def __call__(self, value):
+        try:
+            extension = value.filename.rfind('.')
+            assert extension >= 0
+            extension = value.filename[extension + 1:].lower()
+            if extension == 'jpg':
+                extension = 'jpeg'
+            assert extension in self.extensions
+            if extension == 'bmp':
+                width, height = self.__bmp(value.file)
+            elif extension == 'gif':
+                width, height = self.__gif(value.file)
+            elif extension == 'jpeg':
+                width, height = self.__jpeg(value.file)
+            elif extension == 'png':
+                width, height = self.__png(value.file)
+            else:
+                width = -1
+                height = -1
+            assert self.minsize[0] <= width <= self.maxsize[0] \
+                and self.minsize[1] <= height <= self.maxsize[1]
+            value.file.seek(0)
+            return (value, None)
+        except:
+            return (value, translate(self.error_message))
+
+    def __bmp(self, stream):
+        if stream.read(2) == 'BM':
+            stream.read(16)
+            return struct.unpack("= 0xC0 and code <= 0xC3:
+                    return tuple(reversed(
+                        struct.unpack("!xHH", stream.read(5))))
+                else:
+                    stream.read(length - 2)
+        return (-1, -1)
+
+    def __png(self, stream):
+        if stream.read(8) == '\211PNG\r\n\032\n':
+            stream.read(4)
+            if stream.read(4) == "IHDR":
+                return struct.unpack("!LL", stream.read(8))
+        return (-1, -1)
+
+
+class IS_UPLOAD_FILENAME(Validator):
+    """
+    Checks if name and extension of file uploaded through file input matches
+    given criteria.
+
+    Does *not* ensure the file type in any way. Returns validation failure
+    if no data was uploaded.
+
+    Arguments::
+
+    filename: filename (before dot) regex
+    extension: extension (after dot) regex
+    lastdot: which dot should be used as a filename / extension separator:
+             True means last dot, eg. file.png -> file / png
+             False means first dot, eg. file.tar.gz -> file / tar.gz
+    case: 0 - keep the case, 1 - transform the string into lowercase (default),
+          2 - transform the string into uppercase
+
+    If there is no dot present, extension checks will be done against empty
+    string and filename checks against whole value.
+
+    Examples::
+
+        #Check if file has a pdf extension (case insensitive):
+        INPUT(_type='file', _name='name',
+            requires=IS_UPLOAD_FILENAME(extension='pdf'))
+
+        #Check if file has a tar.gz extension and name starting with backup:
+        INPUT(_type='file', _name='name',
+            requires=IS_UPLOAD_FILENAME(filename='backup.*',
+                extension='tar.gz', lastdot=False))
+
+        #Check if file has no extension and name matching README
+        #(case sensitive):
+        INPUT(_type='file', _name='name',
+            requires=IS_UPLOAD_FILENAME(filename='^README$',
+                extension='^$', case=0))
+    """
+
+    def __init__(self, filename=None, extension=None, lastdot=True, case=1,
+            error_message='enter valid filename'):
+        if isinstance(filename, str):
+            filename = re.compile(filename)
+        if isinstance(extension, str):
+            extension = re.compile(extension)
+        self.filename = filename
+        self.extension = extension
+        self.lastdot = lastdot
+        self.case = case
+        self.error_message = error_message
+
+    def __call__(self, value):
+        try:
+            string = value.filename
+        except:
+            return (value, translate(self.error_message))
+        if self.case == 1:
+            string = string.lower()
+        elif self.case == 2:
+            string = string.upper()
+        if self.lastdot:
+            dot = string.rfind('.')
+        else:
+            dot = string.find('.')
+        if dot == -1:
+            dot = len(string)
+        if self.filename and not self.filename.match(string[:dot]):
+            return (value, translate(self.error_message))
+        elif self.extension and not self.extension.match(string[dot + 1:]):
+            return (value, translate(self.error_message))
+        else:
+            return (value, None)
+
+
+class IS_IPV4(Validator):
+    """
+    Checks if field's value is an IP version 4 address in decimal form. Can
+    be set to force addresses from certain range.
+
+    IPv4 regex taken from: http://regexlib.com/REDetails.aspx?regexp_id=1411
+
+    Arguments:
+
+    minip: lowest allowed address; accepts:
+           str, eg. 192.168.0.1
+           list or tuple of octets, eg. [192, 168, 0, 1]
+    maxip: highest allowed address; same as above
+    invert: True to allow addresses only from outside of given range; note
+            that range boundaries are not matched this way
+    is_localhost: localhost address treatment:
+                  None (default): indifferent
+                  True (enforce): query address must match localhost address
+                                  (127.0.0.1)
+                  False (forbid): query address must not match localhost
+                                  address
+    is_private: same as above, except that query address is checked against
+                two address ranges: 172.16.0.0 - 172.31.255.255 and
+                192.168.0.0 - 192.168.255.255
+    is_automatic: same as above, except that query address is checked against
+                  one address range: 169.254.0.0 - 169.254.255.255
+
+    Minip and maxip may also be lists or tuples of addresses in all above
+    forms (str, int, list / tuple), allowing setup of multiple address ranges:
+
+        minip = (minip1, minip2, ... minipN)
+                   |       |           |
+                   |       |           |
+        maxip = (maxip1, maxip2, ... maxipN)
+
+    Longer iterable will be truncated to match length of shorter one.
+
+    Examples::
+
+        #Check for valid IPv4 address:
+        INPUT(_type='text', _name='name', requires=IS_IPV4())
+
+        #Check for valid IPv4 address belonging to specific range:
+        INPUT(_type='text', _name='name',
+            requires=IS_IPV4(minip='100.200.0.0', maxip='100.200.255.255'))
+
+        #Check for valid IPv4 address belonging to either 100.110.0.0 -
+        #100.110.255.255 or 200.50.0.0 - 200.50.0.255 address range:
+        INPUT(_type='text', _name='name',
+            requires=IS_IPV4(minip=('100.110.0.0', '200.50.0.0'),
+                             maxip=('100.110.255.255', '200.50.0.255')))
+
+        #Check for valid IPv4 address belonging to private address space:
+        INPUT(_type='text', _name='name', requires=IS_IPV4(is_private=True))
+
+        #Check for valid IPv4 address that is not a localhost address:
+        INPUT(_type='text', _name='name', requires=IS_IPV4(is_localhost=False))
+
+    >>> IS_IPV4()('1.2.3.4')
+    ('1.2.3.4', None)
+    >>> IS_IPV4()('255.255.255.255')
+    ('255.255.255.255', None)
+    >>> IS_IPV4()('1.2.3.4 ')
+    ('1.2.3.4 ', 'enter valid IPv4 address')
+    >>> IS_IPV4()('1.2.3.4.5')
+    ('1.2.3.4.5', 'enter valid IPv4 address')
+    >>> IS_IPV4()('123.123')
+    ('123.123', 'enter valid IPv4 address')
+    >>> IS_IPV4()('1111.2.3.4')
+    ('1111.2.3.4', 'enter valid IPv4 address')
+    >>> IS_IPV4()('0111.2.3.4')
+    ('0111.2.3.4', 'enter valid IPv4 address')
+    >>> IS_IPV4()('256.2.3.4')
+    ('256.2.3.4', 'enter valid IPv4 address')
+    >>> IS_IPV4()('300.2.3.4')
+    ('300.2.3.4', 'enter valid IPv4 address')
+    >>> IS_IPV4(minip='1.2.3.4', maxip='1.2.3.4')('1.2.3.4')
+    ('1.2.3.4', None)
+    >>> IS_IPV4(minip='1.2.3.5', maxip='1.2.3.9', error_message='bad ip')('1.2.3.4')
+    ('1.2.3.4', 'bad ip')
+    >>> IS_IPV4(maxip='1.2.3.4', invert=True)('127.0.0.1')
+    ('127.0.0.1', None)
+    >>> IS_IPV4(maxip='1.2.3.4', invert=True)('1.2.3.4')
+    ('1.2.3.4', 'enter valid IPv4 address')
+    >>> IS_IPV4(is_localhost=True)('127.0.0.1')
+    ('127.0.0.1', None)
+    >>> IS_IPV4(is_localhost=True)('1.2.3.4')
+    ('1.2.3.4', 'enter valid IPv4 address')
+    >>> IS_IPV4(is_localhost=False)('127.0.0.1')
+    ('127.0.0.1', 'enter valid IPv4 address')
+    >>> IS_IPV4(maxip='100.0.0.0', is_localhost=True)('127.0.0.1')
+    ('127.0.0.1', 'enter valid IPv4 address')
+    """
+
+    regex = re.compile(
+        '^(([1-9]?\d|1\d\d|2[0-4]\d|25[0-5])\.){3}([1-9]?\d|1\d\d|2[0-4]\d|25[0-5])$')
+    numbers = (16777216, 65536, 256, 1)
+    localhost = 2130706433
+    private = ((2886729728L, 2886795263L), (3232235520L, 3232301055L))
+    automatic = (2851995648L, 2852061183L)
+
+    def __init__(
+        self,
+        minip='0.0.0.0',
+        maxip='255.255.255.255',
+        invert=False,
+        is_localhost=None,
+        is_private=None,
+        is_automatic=None,
+        error_message='enter valid IPv4 address'):
+        for n, value in enumerate((minip, maxip)):
+            temp = []
+            if isinstance(value, str):
+                temp.append(value.split('.'))
+            elif isinstance(value, (list, tuple)):
+                if len(value) == len(filter(lambda item: isinstance(item, int), value)) == 4:
+                    temp.append(value)
+                else:
+                    for item in value:
+                        if isinstance(item, str):
+                            temp.append(item.split('.'))
+                        elif isinstance(item, (list, tuple)):
+                            temp.append(item)
+            numbers = []
+            for item in temp:
+                number = 0
+                for i, j in zip(self.numbers, item):
+                    number += i * int(j)
+                numbers.append(number)
+            if n == 0:
+                self.minip = numbers
+            else:
+                self.maxip = numbers
+        self.invert = invert
+        self.is_localhost = is_localhost
+        self.is_private = is_private
+        self.is_automatic = is_automatic
+        self.error_message = error_message
+
+    def __call__(self, value):
+        if self.regex.match(value):
+            number = 0
+            for i, j in zip(self.numbers, value.split('.')):
+                number += i * int(j)
+            ok = False
+            for bottom, top in zip(self.minip, self.maxip):
+                if self.invert != (bottom <= number <= top):
+                    ok = True
+            if not (self.is_localhost == None or self.is_localhost == \
+                (number == self.localhost)):
+                    ok = False
+            if not (self.is_private == None or self.is_private == \
+                (sum([number[0] <= number <= number[1] for number in self.private]) > 0)):
+                    ok = False
+            if not (self.is_automatic == None or self.is_automatic == \
+                (self.automatic[0] <= number <= self.automatic[1])):
+                    ok = False
+            if ok:
+                return (value, None)
+        return (value, translate(self.error_message))
+
+if __name__ == '__main__':
+    import doctest
+    doctest.testmod()
+

ADDED   gluon/widget.py
Index: gluon/widget.py
==================================================================
--- /dev/null
+++ gluon/widget.py
@@ -0,0 +1,922 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro 
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+The widget is called from web2py.
+"""
+
+import sys
+import cStringIO
+import time
+import thread
+import re
+import os
+import socket
+import signal
+import math
+import logging
+
+import newcron
+import main
+
+from fileutils import w2p_pack, read_file, write_file
+from shell import run, test
+from settings import global_settings
+
+try:
+    import Tkinter, tkMessageBox
+    import contrib.taskbar_widget
+    from winservice import web2py_windows_service_handler
+except:
+    pass
+
+
+try:
+    BaseException
+except NameError:
+    BaseException = Exception
+
+ProgramName = 'web2py Web Framework'
+ProgramAuthor = 'Created by Massimo Di Pierro, Copyright 2007-2011'
+ProgramVersion = read_file('VERSION').strip()
+
+ProgramInfo = '''%s
+                 %s
+                 %s''' % (ProgramName, ProgramAuthor, ProgramVersion)
+
+if not sys.version[:3] in ['2.4', '2.5', '2.6', '2.7']:
+    msg = 'Warning: web2py requires Python 2.4, 2.5 (recommended), 2.6 or 2.7 but you are running:\n%s'
+    msg = msg % sys.version
+    sys.stderr.write(msg)
+
+logger = logging.getLogger("web2py")
+
+class IO(object):
+    """   """
+
+    def __init__(self):
+        """   """
+
+        self.buffer = cStringIO.StringIO()
+
+    def write(self, data):
+        """   """
+
+        sys.__stdout__.write(data)
+        if hasattr(self, 'callback'):
+            self.callback(data)
+        else:
+            self.buffer.write(data)
+
+
+def try_start_browser(url):
+    """ Try to start the default browser """
+
+    try:
+        import webbrowser
+        webbrowser.open(url)
+    except:
+        print 'warning: unable to detect your browser'
+
+
+def start_browser(ip, port):
+    """ Starts the default browser """
+    print 'please visit:'
+    print '\thttp://%s:%s' % (ip, port)
+    print 'starting browser...'
+    try_start_browser('http://%s:%s' % (ip, port))
+
+
+def presentation(root):
+    """ Draw the splash screen """
+
+    root.withdraw()
+
+    dx = root.winfo_screenwidth()
+    dy = root.winfo_screenheight()
+
+    dialog = Tkinter.Toplevel(root, bg='white')
+    dialog.geometry('%ix%i+%i+%i' % (500, 300, dx / 2 - 200, dy / 2 - 150))
+
+    dialog.overrideredirect(1)
+    dialog.focus_force()
+
+    canvas = Tkinter.Canvas(dialog,
+                            background='white',
+                            width=500,
+                            height=300)
+    canvas.pack()
+    root.update()
+
+    img = Tkinter.PhotoImage(file='splashlogo.gif')
+    pnl = Tkinter.Label(canvas, image=img, background='white', bd=0)
+    pnl.pack(side='top', fill='both', expand='yes')
+    # Prevent garbage collection of img
+    pnl.image=img
+
+    def add_label(text='Change Me', font_size=12, foreground='#195866', height=1):
+        return Tkinter.Label(
+            master=canvas,
+            width=250,
+            height=height,
+            text=text,
+            font=('Helvetica', font_size),
+            anchor=Tkinter.CENTER,
+            foreground=foreground,
+            background='white'
+            )
+
+    add_label('Welcome to...').pack(side='top')
+    add_label(ProgramName, 18, '#FF5C1F', 2).pack()
+    add_label(ProgramAuthor).pack()
+    add_label(ProgramVersion).pack()
+
+    root.update()
+    time.sleep(5)
+    dialog.destroy()
+    return
+
+
+class web2pyDialog(object):
+    """ Main window dialog """
+
+    def __init__(self, root, options):
+        """ web2pyDialog constructor  """
+
+        root.title('web2py server')
+        self.root = Tkinter.Toplevel(root)
+        self.options = options
+        self.menu = Tkinter.Menu(self.root)
+        servermenu = Tkinter.Menu(self.menu, tearoff=0)
+        httplog = os.path.join(self.options.folder, 'httpserver.log')
+
+        # Building the Menu
+        item = lambda: try_start_browser(httplog)
+        servermenu.add_command(label='View httpserver.log',
+                               command=item)
+
+        servermenu.add_command(label='Quit (pid:%i)' % os.getpid(),
+                               command=self.quit)
+
+        self.menu.add_cascade(label='Server', menu=servermenu)
+
+        self.pagesmenu = Tkinter.Menu(self.menu, tearoff=0)
+        self.menu.add_cascade(label='Pages', menu=self.pagesmenu)
+
+        helpmenu = Tkinter.Menu(self.menu, tearoff=0)
+
+        # Home Page
+        item = lambda: try_start_browser('http://www.web2py.com')
+        helpmenu.add_command(label='Home Page',
+                             command=item)
+
+        # About
+        item = lambda: tkMessageBox.showinfo('About web2py', ProgramInfo)
+        helpmenu.add_command(label='About',
+                             command=item)
+
+        self.menu.add_cascade(label='Info', menu=helpmenu)
+
+        self.root.config(menu=self.menu)
+
+        if options.taskbar:
+            self.root.protocol('WM_DELETE_WINDOW',
+                               lambda: self.quit(True))
+        else:
+            self.root.protocol('WM_DELETE_WINDOW', self.quit)
+
+        sticky = Tkinter.NW
+
+        # IP
+        Tkinter.Label(self.root,
+                      text='Server IP:',
+                      justify=Tkinter.LEFT).grid(row=0,
+                                                 column=0,
+                                                 sticky=sticky)
+        self.ip = Tkinter.Entry(self.root)
+        self.ip.insert(Tkinter.END, self.options.ip)
+        self.ip.grid(row=0, column=1, sticky=sticky)
+
+        # Port
+        Tkinter.Label(self.root,
+                      text='Server Port:',
+                      justify=Tkinter.LEFT).grid(row=1,
+                                                 column=0,
+                                                 sticky=sticky)
+
+        self.port_number = Tkinter.Entry(self.root)
+        self.port_number.insert(Tkinter.END, self.options.port)
+        self.port_number.grid(row=1, column=1, sticky=sticky)
+
+        # Password
+        Tkinter.Label(self.root,
+                      text='Choose Password:',
+                      justify=Tkinter.LEFT).grid(row=2,
+                                                 column=0,
+                                                 sticky=sticky)
+
+        self.password = Tkinter.Entry(self.root, show='*')
+        self.password.bind('', lambda e: self.start())
+        self.password.focus_force()
+        self.password.grid(row=2, column=1, sticky=sticky)
+
+        # Prepare the canvas
+        self.canvas = Tkinter.Canvas(self.root,
+                                     width=300,
+                                     height=100,
+                                     bg='black')
+        self.canvas.grid(row=3, column=0, columnspan=2)
+        self.canvas.after(1000, self.update_canvas)
+
+        # Prepare the frame
+        frame = Tkinter.Frame(self.root)
+        frame.grid(row=4, column=0, columnspan=2)
+
+        # Start button
+        self.button_start = Tkinter.Button(frame,
+                                           text='start server',
+                                           command=self.start)
+
+        self.button_start.grid(row=0, column=0)
+
+        # Stop button
+        self.button_stop = Tkinter.Button(frame,
+                                          text='stop server',
+                                          command=self.stop)
+
+        self.button_stop.grid(row=0, column=1)
+        self.button_stop.configure(state='disabled')
+
+        if options.taskbar:
+            self.tb = contrib.taskbar_widget.TaskBarIcon()
+            self.checkTaskBar()
+
+            if options.password != '':
+                self.password.insert(0, options.password)
+                self.start()
+                self.root.withdraw()
+        else:
+            self.tb = None
+
+    def checkTaskBar(self):
+        """ Check taskbar status """
+
+        if self.tb.status:
+            if self.tb.status[0] == self.tb.EnumStatus.QUIT:
+                self.quit()
+            elif self.tb.status[0] == self.tb.EnumStatus.TOGGLE:
+                if self.root.state() == 'withdrawn':
+                    self.root.deiconify()
+                else:
+                    self.root.withdraw()
+            elif self.tb.status[0] == self.tb.EnumStatus.STOP:
+                self.stop()
+            elif self.tb.status[0] == self.tb.EnumStatus.START:
+                self.start()
+            elif self.tb.status[0] == self.tb.EnumStatus.RESTART:
+                self.stop()
+                self.start()
+            del self.tb.status[0]
+
+        self.root.after(1000, self.checkTaskBar)
+
+    def update(self, text):
+        """ Update app text """
+
+        try:
+            self.text.configure(state='normal')
+            self.text.insert('end', text)
+            self.text.configure(state='disabled')
+        except:
+            pass  # ## this should only happen in case app is destroyed
+
+    def connect_pages(self):
+        """ Connect pages """
+
+        for arq in os.listdir('applications/'):
+            if os.path.exists('applications/%s/__init__.py' % arq):
+                url = self.url + '/' + arq
+                start_browser = lambda u = url: try_start_browser(u)
+                self.pagesmenu.add_command(label=url,
+                                           command=start_browser)
+
+    def quit(self, justHide=False):
+        """ Finish the program execution """
+
+        if justHide:
+            self.root.withdraw()
+        else:
+            try:
+                self.server.stop()
+            except:
+                pass
+
+            try:
+                self.tb.Destroy()
+            except:
+                pass
+
+            self.root.destroy()
+            sys.exit()
+
+    def error(self, message):
+        """ Show error message """
+
+        tkMessageBox.showerror('web2py start server', message)
+
+    def start(self):
+        """ Start web2py server """
+
+        password = self.password.get()
+
+        if not password:
+            self.error('no password, no web admin interface')
+
+        ip = self.ip.get()
+
+        regexp = '\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}'
+        if ip and not re.compile(regexp).match(ip):
+            return self.error('invalid host ip address')
+
+        try:
+            port = int(self.port_number.get())
+        except:
+            return self.error('invalid port number')
+
+        self.url = 'http://%s:%s' % (ip, port)
+        self.connect_pages()
+        self.button_start.configure(state='disabled')
+
+        try:
+            options = self.options
+            req_queue_size = options.request_queue_size
+            self.server = main.HttpServer(
+                ip,
+                port,
+                password,
+                pid_filename=options.pid_filename,
+                log_filename=options.log_filename,
+                profiler_filename=options.profiler_filename,
+                ssl_certificate=options.ssl_certificate,
+                ssl_private_key=options.ssl_private_key,
+                min_threads=options.minthreads,
+                max_threads=options.maxthreads,
+                server_name=options.server_name,
+                request_queue_size=req_queue_size,
+                timeout=options.timeout,
+                shutdown_timeout=options.shutdown_timeout,
+                path=options.folder,
+                interfaces=options.interfaces)
+
+            thread.start_new_thread(self.server.start, ())
+        except Exception, e:
+            self.button_start.configure(state='normal')
+            return self.error(str(e))
+
+        self.button_stop.configure(state='normal')
+
+        if not options.taskbar:
+            thread.start_new_thread(start_browser, (ip, port))
+
+        self.password.configure(state='readonly')
+        self.ip.configure(state='readonly')
+        self.port_number.configure(state='readonly')
+
+        if self.tb:
+            self.tb.SetServerRunning()
+
+    def stop(self):
+        """ Stop web2py server """
+
+        self.button_start.configure(state='normal')
+        self.button_stop.configure(state='disabled')
+        self.password.configure(state='normal')
+        self.ip.configure(state='normal')
+        self.port_number.configure(state='normal')
+        self.server.stop()
+
+        if self.tb:
+            self.tb.SetServerStopped()
+
+    def update_canvas(self):
+        """ Update canvas """
+
+        try:
+            t1 = os.path.getsize('httpserver.log')
+        except:
+            self.canvas.after(1000, self.update_canvas)
+            return
+
+        try:
+            fp = open('httpserver.log', 'r')
+            fp.seek(self.t0)
+            data = fp.read(t1 - self.t0)
+            fp.close()
+            value = self.p0[1:] + [10 + 90.0 / math.sqrt(1 + data.count('\n'))]
+            self.p0 = value
+
+            for i in xrange(len(self.p0) - 1):
+                c = self.canvas.coords(self.q0[i])
+                self.canvas.coords(self.q0[i],
+                                   (c[0],
+                                    self.p0[i],
+                                    c[2],
+                                    self.p0[i + 1]))
+            self.t0 = t1
+        except BaseException:
+            self.t0 = time.time()
+            self.t0 = t1
+            self.p0 = [100] * 300
+            self.q0 = [self.canvas.create_line(i, 100, i + 1, 100,
+                       fill='green') for i in xrange(len(self.p0) - 1)]
+
+        self.canvas.after(1000, self.update_canvas)
+
+
+def console():
+    """ Defines the behavior of the console web2py execution """
+    import optparse
+    import textwrap
+
+    usage = "python web2py.py"
+
+    description = """\
+    web2py Web Framework startup script.
+    ATTENTION: unless a password is specified (-a 'passwd') web2py will
+    attempt to run a GUI. In this case command line options are ignored."""
+
+    description = textwrap.dedent(description)
+
+    parser = optparse.OptionParser(usage, None, optparse.Option, ProgramVersion)
+
+    parser.description = description
+
+    parser.add_option('-i',
+                      '--ip',
+                      default='127.0.0.1',
+                      dest='ip',
+                      help='ip address of the server (127.0.0.1)')
+
+    parser.add_option('-p',
+                      '--port',
+                      default='8000',
+                      dest='port',
+                      type='int',
+                      help='port of server (8000)')
+
+    msg = 'password to be used for administration'
+    msg += ' (use -a "" to reuse the last password))'
+    parser.add_option('-a',
+                      '--password',
+                      default='',
+                      dest='password',
+                      help=msg)
+
+    parser.add_option('-c',
+                      '--ssl_certificate',
+                      default='',
+                      dest='ssl_certificate',
+                      help='file that contains ssl certificate')
+
+    parser.add_option('-k',
+                      '--ssl_private_key',
+                      default='',
+                      dest='ssl_private_key',
+                      help='file that contains ssl private key')
+
+    parser.add_option('-d',
+                      '--pid_filename',
+                      default='httpserver.pid',
+                      dest='pid_filename',
+                      help='file to store the pid of the server')
+
+    parser.add_option('-l',
+                      '--log_filename',
+                      default='httpserver.log',
+                      dest='log_filename',
+                      help='file to log connections')
+
+    parser.add_option('-n',
+                      '--numthreads',
+                      default=None,
+                      type='int',
+                      dest='numthreads',
+                      help='number of threads (deprecated)')
+
+    parser.add_option('--minthreads',
+                      default=None,
+                      type='int',
+                      dest='minthreads',
+                      help='minimum number of server threads')
+
+    parser.add_option('--maxthreads',
+                      default=None,
+                      type='int',
+                      dest='maxthreads',
+                      help='maximum number of server threads')
+
+    parser.add_option('-s',
+                      '--server_name',
+                      default=socket.gethostname(),
+                      dest='server_name',
+                      help='server name for the web server')
+
+    msg = 'max number of queued requests when server unavailable'
+    parser.add_option('-q',
+                      '--request_queue_size',
+                      default='5',
+                      type='int',
+                      dest='request_queue_size',
+                      help=msg)
+
+    parser.add_option('-o',
+                      '--timeout',
+                      default='10',
+                      type='int',
+                      dest='timeout',
+                      help='timeout for individual request (10 seconds)')
+
+    parser.add_option('-z',
+                      '--shutdown_timeout',
+                      default='5',
+                      type='int',
+                      dest='shutdown_timeout',
+                      help='timeout on shutdown of server (5 seconds)')
+    parser.add_option('-f',
+                      '--folder',
+                      default=os.getcwd(),
+                      dest='folder',
+                      help='folder from which to run web2py')
+
+    parser.add_option('-v',
+                      '--verbose',
+                      action='store_true',
+                      dest='verbose',
+                      default=False,
+                      help='increase --test verbosity')
+
+    parser.add_option('-Q',
+                      '--quiet',
+                      action='store_true',
+                      dest='quiet',
+                      default=False,
+                      help='disable all output')
+
+    msg = 'set debug output level (0-100, 0 means all, 100 means none;'
+    msg += ' default is 30)'
+    parser.add_option('-D',
+                      '--debug',
+                      dest='debuglevel',
+                      default=30,
+                      type='int',
+                      help=msg)
+
+    msg = 'run web2py in interactive shell or IPython (if installed) with'
+    msg += ' specified appname (if app does not exist it will be created).'
+    msg += ' APPNAME like a/c/f (c,f optional)'
+    parser.add_option('-S',
+                      '--shell',
+                      dest='shell',
+                      metavar='APPNAME',
+                      help=msg)
+
+    msg = 'run web2py in interactive shell or bpython (if installed) with'
+    msg += ' specified appname (if app does not exist it will be created).'
+    msg += '\n Use combined with --shell'
+    parser.add_option('-B',
+                      '--bpython',
+                      action='store_true',
+                      default=False,
+                      dest='bpython',
+                      help=msg)
+
+    msg = 'only use plain python shell; should be used with --shell option'
+    parser.add_option('-P',
+                      '--plain',
+                      action='store_true',
+                      default=False,
+                      dest='plain',
+                      help=msg)
+
+    msg = 'auto import model files; default is False; should be used'
+    msg += ' with --shell option'
+    parser.add_option('-M',
+                      '--import_models',
+                      action='store_true',
+                      default=False,
+                      dest='import_models',
+                      help=msg)
+
+    msg = 'run PYTHON_FILE in web2py environment;'
+    msg += ' should be used with --shell option'
+    parser.add_option('-R',
+                      '--run',
+                      dest='run',
+                      metavar='PYTHON_FILE',
+                      default='',
+                      help=msg)
+
+    msg = 'run doctests in web2py environment; ' +\
+        'TEST_PATH like a/c/f (c,f optional)'
+    parser.add_option('-T',
+                      '--test',
+                      dest='test',
+                      metavar='TEST_PATH',
+                      default=None,
+                      help=msg)
+
+    parser.add_option('-W',
+                      '--winservice',
+                      dest='winservice',
+                      default='',
+                      help='-W install|start|stop as Windows service')
+
+    msg = 'trigger a cron run manually; usually invoked from a system crontab'
+    parser.add_option('-C',
+                      '--cron',
+                      action='store_true',
+                      dest='extcron',
+                      default=False,
+                      help=msg)
+
+    msg = 'triggers the use of softcron'
+    parser.add_option('--softcron',
+                      action='store_true',
+                      dest='softcron',
+                      default=False,
+                      help=msg)
+
+    parser.add_option('-N',
+                      '--no-cron',
+                      action='store_true',
+                      dest='nocron',
+                      default=False,
+                      help='do not start cron automatically')
+
+    parser.add_option('-J',
+                      '--cronjob',
+                      action='store_true',
+                      dest='cronjob',
+                      default=False,
+                      help='identify cron-initiated command')
+
+    parser.add_option('-L',
+                      '--config',
+                      dest='config',
+                      default='',
+                      help='config file')
+
+    parser.add_option('-F',
+                      '--profiler',
+                      dest='profiler_filename',
+                      default=None,
+                      help='profiler filename')
+
+    parser.add_option('-t',
+                      '--taskbar',
+                      action='store_true',
+                      dest='taskbar',
+                      default=False,
+                      help='use web2py gui and run in taskbar (system tray)')
+
+    parser.add_option('',
+                      '--nogui',
+                      action='store_true',
+                      default=False,
+                      dest='nogui',
+                      help='text-only, no GUI')
+
+    parser.add_option('-A',
+                      '--args',
+                      action='store',
+                      dest='args',
+                      default=None,
+                      help='should be followed by a list of arguments to be passed to script, to be used with -S, -A must be the last option')
+
+    parser.add_option('--no-banner',
+                      action='store_true',
+                      default=False,
+                      dest='nobanner',
+                      help='Do not print header banner')
+
+    msg = 'listen on multiple addresses: "ip:port:cert:key;ip2:port2:cert2:key2;..." (:cert:key optional; no spaces)'
+    parser.add_option('--interfaces',
+                      action='store',
+                      dest='interfaces',
+                      default=None,
+                      help=msg)
+
+    if '-A' in sys.argv: k = sys.argv.index('-A')
+    elif '--args' in sys.argv: k = sys.argv.index('--args')
+    else: k=len(sys.argv)
+    sys.argv, other_args = sys.argv[:k], sys.argv[k+1:]
+    (options, args) = parser.parse_args()
+    options.args = [options.run] + other_args
+    global_settings.cmd_options = options
+    global_settings.cmd_args = args
+
+    if options.quiet:
+        capture = cStringIO.StringIO()
+        sys.stdout = capture
+        logger.setLevel(logging.CRITICAL + 1)
+    else:
+        logger.setLevel(options.debuglevel)
+
+    if options.config[-3:] == '.py':
+        options.config = options.config[:-3]
+
+    if options.cronjob:
+        global_settings.cronjob = True  # tell the world
+        options.nocron = True   # don't start cron jobs
+        options.plain = True    # cronjobs use a plain shell
+
+    options.folder = os.path.abspath(options.folder)
+
+    #  accept --interfaces in the form "ip:port:cert:key;ip2:port2;ip3:port3:cert3:key3"
+    #  (no spaces; optional cert:key indicate SSL)
+    #
+    if isinstance(options.interfaces, str):
+        options.interfaces = [interface.split(':') for interface in options.interfaces.split(';')]
+        for interface in options.interfaces:
+            interface[1] = int(interface[1])    # numeric port
+        options.interfaces = [tuple(interface) for interface in options.interfaces]
+
+    if options.numthreads is not None and options.minthreads is None:
+        options.minthreads = options.numthreads  # legacy
+
+    if not options.cronjob:
+        # If we have the applications package or if we should upgrade
+        if not os.path.exists('applications/__init__.py'):
+            write_file('applications/__init__.py', '')
+
+        if not os.path.exists('welcome.w2p') or os.path.exists('NEWINSTALL'):
+            try:
+                w2p_pack('welcome.w2p','applications/welcome')
+                os.unlink('NEWINSTALL')
+            except:
+                msg = "New installation: unable to create welcome.w2p file"
+                sys.stderr.write(msg)
+
+    return (options, args)
+
+
+def start(cron=True):
+    """ Start server  """
+
+    # ## get command line arguments
+
+    (options, args) = console()
+
+    if not options.nobanner:
+        print ProgramName
+        print ProgramAuthor
+        print ProgramVersion
+
+    from dal import drivers
+    if not options.nobanner:
+        print 'Database drivers available: %s' % ', '.join(drivers)
+
+
+    # ## if -L load options from options.config file
+    if options.config:
+        try:
+            options2 = __import__(options.config, {}, {}, '')
+        except Exception:
+            try:
+                # Jython doesn't like the extra stuff
+                options2 = __import__(options.config)
+            except Exception:
+                print 'Cannot import config file [%s]' % options.config
+                sys.exit(1)
+        for key in dir(options2):
+            if hasattr(options,key):
+                setattr(options,key,getattr(options2,key))
+
+    # ## if -T run doctests (no cron)
+    if hasattr(options,'test') and options.test:
+        test(options.test, verbose=options.verbose)
+        return
+
+    # ## if -S start interactive shell (also no cron)
+    if options.shell:
+        if options.args!=None:
+            sys.argv[:] = options.args
+        run(options.shell, plain=options.plain, bpython=options.bpython,
+            import_models=options.import_models, startfile=options.run)
+        return
+
+    # ## if -C start cron run (extcron) and exit
+    # ## if -N or not cron disable cron in this *process*
+    # ## if --softcron use softcron
+    # ## use hardcron in all other cases
+    if options.extcron:
+        print 'Starting extcron...'
+        global_settings.web2py_crontype = 'external'
+        extcron = newcron.extcron(options.folder)
+        extcron.start()
+        extcron.join()
+        return
+    elif cron and not options.nocron and options.softcron:
+        print 'Using softcron (but this is not very efficient)'
+        global_settings.web2py_crontype = 'soft'
+    elif cron and not options.nocron:
+        print 'Starting hardcron...'
+        global_settings.web2py_crontype = 'hard'
+        newcron.hardcron(options.folder).start()
+
+    # ## if -W install/start/stop web2py as service
+    if options.winservice:
+        if os.name == 'nt':
+            web2py_windows_service_handler(['', options.winservice],
+                    options.config)
+        else:
+            print 'Error: Windows services not supported on this platform'
+            sys.exit(1)
+        return
+
+    # ## if no password provided and havetk start Tk interface
+    # ## or start interface if we want to put in taskbar (system tray)
+
+    try:
+        options.taskbar
+    except:
+        options.taskbar = False
+
+    if options.taskbar and os.name != 'nt':
+        print 'Error: taskbar not supported on this platform'
+        sys.exit(1)
+
+    root = None
+
+    if not options.nogui:
+        try:
+            import Tkinter
+            havetk = True
+        except ImportError:
+            logger.warn('GUI not available because Tk library is not installed')
+            havetk = False
+
+        if options.password == '' and havetk or options.taskbar and havetk:
+            try:
+                root = Tkinter.Tk()
+            except:
+                pass
+
+    if root:
+        root.focus_force()
+        if not options.quiet:
+            presentation(root)
+        master = web2pyDialog(root, options)
+        signal.signal(signal.SIGTERM, lambda a, b: master.quit())
+
+        try:
+            root.mainloop()
+        except:
+            master.quit()
+
+        sys.exit()
+
+    # ## if no tk and no password, ask for a password
+
+    if not root and options.password == '':
+        options.password = raw_input('choose a password:')
+
+    if not options.password and not options.nobanner:
+        print 'no password, no admin interface'
+
+    # ## start server
+
+    (ip, port) = (options.ip, int(options.port))
+
+    if not options.nobanner:
+        print 'please visit:'
+        print '\thttp://%s:%s' % (ip, port)
+        print 'use "kill -SIGTERM %i" to shutdown the web2py server' % os.getpid()
+
+    server = main.HttpServer(ip=ip,
+                             port=port,
+                             password=options.password,
+                             pid_filename=options.pid_filename,
+                             log_filename=options.log_filename,
+                             profiler_filename=options.profiler_filename,
+                             ssl_certificate=options.ssl_certificate,
+                             ssl_private_key=options.ssl_private_key,
+                             min_threads=options.minthreads,
+                             max_threads=options.maxthreads,
+                             server_name=options.server_name,
+                             request_queue_size=options.request_queue_size,
+                             timeout=options.timeout,
+                             shutdown_timeout=options.shutdown_timeout,
+                             path=options.folder,
+                             interfaces=options.interfaces)
+
+    try:
+        server.start()
+    except KeyboardInterrupt:
+        server.stop()
+    logging.shutdown()
+

ADDED   gluon/winservice.py
Index: gluon/winservice.py
==================================================================
--- /dev/null
+++ gluon/winservice.py
@@ -0,0 +1,164 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+"""
+This file is part of the web2py Web Framework
+Developed by Massimo Di Pierro  and
+Limodou .
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+This makes uses of the pywin32 package
+(http://sourceforge.net/projects/pywin32/).
+You do not need to install this package to use web2py.
+
+
+"""
+
+import time
+import os
+import sys
+import traceback
+try:
+    import win32serviceutil
+    import win32service
+    import win32event
+except:
+    if os.name == 'nt':
+        print "Warning, winservice is unable to install the Mark Hammond Win32 extensions"
+import servicemanager
+import _winreg
+from fileutils import up
+
+__all__ = ['web2py_windows_service_handler']
+
+class Service(win32serviceutil.ServiceFramework):
+
+    _svc_name_ = '_unNamed'
+    _svc_display_name_ = '_Service Template'
+
+    def __init__(self, *args):
+        win32serviceutil.ServiceFramework.__init__(self, *args)
+        self.stop_event = win32event.CreateEvent(None, 0, 0, None)
+
+    def log(self, msg):
+        servicemanager.LogInfoMsg(str(msg))
+
+    def SvcDoRun(self):
+        self.ReportServiceStatus(win32service.SERVICE_START_PENDING)
+        try:
+            self.ReportServiceStatus(win32service.SERVICE_RUNNING)
+            self.start()
+            win32event.WaitForSingleObject(self.stop_event,
+                    win32event.INFINITE)
+        except:
+            self.log(traceback.format_exc(sys.exc_info))
+            self.SvcStop()
+        self.ReportServiceStatus(win32service.SERVICE_STOPPED)
+
+    def SvcStop(self):
+        self.ReportServiceStatus(win32service.SERVICE_STOP_PENDING)
+        try:
+            self.stop()
+        except:
+            self.log(traceback.format_exc(sys.exc_info))
+        win32event.SetEvent(self.stop_event)
+        self.ReportServiceStatus(win32service.SERVICE_STOPPED)
+
+    # to be overridden
+
+    def start(self):
+        pass
+
+    # to be overridden
+
+    def stop(self):
+        pass
+
+
+class Web2pyService(Service):
+
+    _svc_name_ = 'web2py'
+    _svc_display_name_ = 'web2py Service'
+    _exe_args_ = 'options'
+    server = None
+
+    def chdir(self):
+        try:
+            h = _winreg.OpenKey(_winreg.HKEY_LOCAL_MACHINE,
+                                r'SYSTEM\CurrentControlSet\Services\%s'
+                                 % self._svc_name_)
+            try:
+                cls = _winreg.QueryValue(h, 'PythonClass')
+            finally:
+                _winreg.CloseKey(h)
+            dir = os.path.dirname(cls)
+            os.chdir(dir)
+            return True
+        except:
+            self.log("Can't change to web2py working path; server is stopped")
+            return False
+
+    def start(self):
+        self.log('web2py server starting')
+        if not self.chdir():
+            return
+        if len(sys.argv) == 2:
+            opt_mod = sys.argv[1]
+        else:
+            opt_mod = self._exe_args_
+        options = __import__(opt_mod, [], [], '')
+        if True: # legacy support for old options files, which have only (deprecated) numthreads
+            if hasattr(options, 'numthreads') and not hasattr(options, 'minthreads'):
+                options.minthreads = options.numthreads
+            if not hasattr(options, 'minthreads'): options.minthreads = None
+            if not hasattr(options, 'maxthreads'): options.maxthreads = None
+        import main
+        self.server = main.HttpServer(
+            ip=options.ip,
+            port=options.port,
+            password=options.password,
+            pid_filename=options.pid_filename,
+            log_filename=options.log_filename,
+            profiler_filename=options.profiler_filename,
+            ssl_certificate=options.ssl_certificate,
+            ssl_private_key=options.ssl_private_key,
+            min_threads=options.minthreads,
+            max_threads=options.maxthreads,
+            server_name=options.server_name,
+            request_queue_size=options.request_queue_size,
+            timeout=options.timeout,
+            shutdown_timeout=options.shutdown_timeout,
+            path=options.folder
+            )
+        try:
+            self.server.start()
+        except:
+
+            # self.server.stop()
+
+            self.server = None
+            raise
+
+    def stop(self):
+        self.log('web2py server stopping')
+        if not self.chdir():
+            return
+        if self.server:
+            self.server.stop()
+        time.sleep(1)
+
+
+def web2py_windows_service_handler(argv=None, opt_file='options'):
+    path = os.path.dirname(__file__)
+    classstring = os.path.normpath(os.path.join(up(path),
+                                   'gluon.winservice.Web2pyService'))
+    if opt_file:
+        Web2pyService._exe_args_ = opt_file
+        win32serviceutil.HandleCommandLine(Web2pyService,
+                serviceClassString=classstring, argv=['', 'install'])
+    win32serviceutil.HandleCommandLine(Web2pyService,
+            serviceClassString=classstring, argv=argv)
+
+
+if __name__ == '__main__':
+    web2py_windows_service_handler()
+

ADDED   gluon/xmlrpc.py
Index: gluon/xmlrpc.py
==================================================================
--- /dev/null
+++ gluon/xmlrpc.py
@@ -0,0 +1,22 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro 
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+"""
+
+from SimpleXMLRPCServer import SimpleXMLRPCDispatcher
+
+
+def handler(request, response, methods):
+    response.session_id = None  # no sessions for xmlrpc
+    dispatcher = SimpleXMLRPCDispatcher(allow_none=True, encoding=None)
+    for method in methods:
+        dispatcher.register_function(method)
+    dispatcher.register_introspection_functions()
+    response.headers['Content-Type'] = 'text/xml'
+    dispatch = getattr(dispatcher, '_dispatch', None)
+    return dispatcher._marshaled_dispatch(request.body.read(), dispatch)
+

ADDED   logging.example.conf
Index: logging.example.conf
==================================================================
--- /dev/null
+++ logging.example.conf
@@ -0,0 +1,96 @@
+[loggers]
+keys=root,rocket,markdown,web2py,rewrite,app,welcome
+
+# the default configuration is console-based (stdout) for backward compatibility
+#
+# note that file-based handlers are thread-safe but not mp-safe;
+# for mp-safe logging, configure the appropriate syslog handler
+
+[handlers]
+keys=consoleHandler
+#keys=consoleHandler,rotatingFileHandler
+#keys=osxSysLogHandler
+
+[formatters]
+keys=simpleFormatter
+
+[logger_root]
+level=WARNING
+handlers=consoleHandler
+
+[logger_web2py]
+level=WARNING
+handlers=consoleHandler
+qualname=web2py
+propagate=0
+
+[logger_rewrite]
+level=WARNING
+qualname=web2py.rewrite
+handlers=consoleHandler
+propagate=0
+
+# generic app handler
+[logger_app]
+level=WARNING
+qualname=web2py.app
+handlers=consoleHandler
+propagate=0
+
+# welcome app handler
+[logger_welcome]
+level=WARNING
+qualname=web2py.app.welcome
+handlers=consoleHandler
+propagate=0
+
+# loggers for legacy getLogger calls: Rocket and markdown
+[logger_rocket]
+level=WARNING
+handlers=consoleHandler
+qualname=Rocket
+propagate=0
+
+[logger_markdown]
+level=WARNING
+handlers=consoleHandler
+qualname=markdown
+propagate=0
+
+[handler_consoleHandler]
+class=StreamHandler
+level=WARNING
+formatter=simpleFormatter
+args=(sys.stdout,)
+
+# Rotating file handler
+#   mkdir logs in the web2py base directory if not already present
+#   args: (filename[, mode[, maxBytes[, backupCount[, encoding[, delay]]]]])
+#
+[handler_rotatingFileHandler]
+class=handlers.RotatingFileHandler
+level=INFO
+formatter=simpleFormatter
+args=("logs/web2py.log", "a", 1000000, 5)
+
+[handler_osxSysLogHandler]
+class=handlers.SysLogHandler
+level=WARNING
+formatter=simpleFormatter
+args=("/var/run/syslog", handlers.SysLogHandler.LOG_DAEMON)
+
+[handler_linuxSysLogHandler]
+class=handlers.SysLogHandler
+level=WARNING
+formatter=simpleFormatter
+args=("/dev/log", handlers.SysLogHandler.LOG_DAEMON)
+
+[handler_remoteSysLogHandler]
+class=handlers.SysLogHandler
+level=WARNING
+formatter=simpleFormatter
+args=(('sysloghost.domain.com', handlers.SYSLOG_UDP_PORT), handlers.SysLogHandler.LOG_DAEMON)
+
+[formatter_simpleFormatter]
+format=%(asctime)s - %(name)s - %(levelname)s - %(message)s
+datefmt=

ADDED   modpythonhandler.py
Index: modpythonhandler.py
==================================================================
--- /dev/null
+++ modpythonhandler.py
@@ -0,0 +1,224 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro 
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+WSGI wrapper for mod_python. Requires Python 2.2 or greater.
+Part of CherryPy mut modified by Massimo Di Pierro (2008) for web2py
+
+
+    SetHandler python-program
+    PythonHandler modpythonhandler
+    PythonPath \"['/path/to/web2py/'] + sys.path\"
+    PythonOption SCRIPT_NAME /myapp
+
+
+Some WSGI implementations assume that the SCRIPT_NAME environ variable will
+always be equal to 'the root URL of the app'; Apache probably won't act as
+you expect in that case. You can add another PythonOption directive to tell
+modpython_gateway to force that behavior:
+
+    PythonOption SCRIPT_NAME /mcontrol
+
+The module.function will be called with no arguments on server shutdown,
+once for each child process or thread.
+"""
+
+import traceback
+import sys
+import os
+from mod_python import apache
+
+path = os.path.dirname(os.path.abspath(__file__))
+os.chdir(path)
+sys.path = [path]+[p for p in sys.path if not p==path]
+
+import gluon.main
+
+
+class InputWrapper(object):
+    """ Input wrapper for the wsgi handler  """
+
+    def __init__(self, req):
+        """ InputWrapper constructor  """
+
+        self.req = req
+
+    def close(self):
+        """ """
+
+        pass
+
+    def read(self, size=-1):
+        """ Wrapper for req.read  """
+
+        return self.req.read(size)
+
+    def readline(self, size=-1):
+        """ Wrapper for req.readline  """
+
+        return self.req.readline(size)
+
+    def readlines(self, hint=-1):
+        """ Wrapper for req.readlines  """
+
+        return self.req.readlines(hint)
+
+    def __iter__(self):
+        """ Defines a generator with the req data  """
+
+        line = self.readline()
+        while line:
+            yield line
+
+            # Notice this won't prefetch the next line; it only
+            # gets called if the generator is resumed.
+            line = self.readline()
+
+
+class ErrorWrapper(object):
+    """ Error wrapper for the wsgi handler  """
+
+    def __init__(self, req):
+        """ ErrorWrapper constructor """
+
+        self.req = req
+
+    def flush(self):
+        """   """
+
+        pass
+
+    def write(self, msg):
+        """ Logs the given msg in the log file """
+
+        self.req.log_error(msg)
+
+    def writelines(self, seq):
+        """ Writes various lines in the log file """
+
+        self.write(''.join(seq))
+
+
+bad_value = "You must provide a PythonOption '%s', either 'on' or 'off', when running a version of mod_python < 3.1"
+
+
+class Handler:
+    """ Defines the handler  """
+
+    def __init__(self, req):
+        """ Handler constructor  """
+
+        self.started = False
+        options = req.get_options()
+
+        # Threading and forking
+        try:
+            q = apache.mpm_query
+            threaded = q(apache.AP_MPMQ_IS_THREADED)
+            forked = q(apache.AP_MPMQ_IS_FORKED)
+        except AttributeError:
+            threaded = options.get('multithread', '').lower()
+
+            if threaded == 'on':
+                threaded = True
+            elif threaded == 'off':
+                threaded = False
+            else:
+                raise ValueError(bad_value % 'multithread')
+
+            forked = options.get('multiprocess', '').lower()
+
+            if forked == 'on':
+                forked = True
+            elif forked == 'off':
+                forked = False
+            else:
+                raise ValueError(bad_value % 'multiprocess')
+
+        env = self.environ = dict(apache.build_cgi_env(req))
+
+        if 'SCRIPT_NAME' in options:
+            # Override SCRIPT_NAME and PATH_INFO if requested.
+            env['SCRIPT_NAME'] = options['SCRIPT_NAME']
+            env['PATH_INFO'] = req.uri[len(options['SCRIPT_NAME']):]
+
+        env['wsgi.input'] = InputWrapper(req)
+        env['wsgi.errors'] = ErrorWrapper(req)
+        env['wsgi.version'] = (1, 0)
+        env['wsgi.run_once'] = False
+
+        if env.get('HTTPS') in ('yes', 'on', '1'):
+            env['wsgi.url_scheme'] = 'https'
+        else:
+            env['wsgi.url_scheme'] = 'http'
+
+        env['wsgi.multithread'] = threaded
+        env['wsgi.multiprocess'] = forked
+
+        self.request = req
+
+    def run(self, application):
+        """ Run the application  """
+
+        try:
+            result = application(self.environ, self.start_response)
+
+            for data in result:
+                self.write(data)
+
+            if not self.started:
+                self.request.set_content_length(0)
+
+            if hasattr(result, 'close'):
+                result.close()
+        except:
+            traceback.print_exc(None, self.environ['wsgi.errors'])
+
+            if not self.started:
+                self.request.status = 500
+                self.request.content_type = 'text/plain'
+                data = 'A server error occurred. Please contact the ' + \
+                       'administrator.'
+                self.request.set_content_length(len(data))
+                self.request.write(data)
+
+    def start_response(self, status, headers, exc_info=None):
+        """ Defines the request data  """
+
+        if exc_info:
+            try:
+                if self.started:
+                    raise exc_info[0], exc_info[1], exc_info[2]
+            finally:
+                exc_info = None
+
+        self.request.status = int(status[:3])
+
+        for (key, val) in headers:
+            if key.lower() == 'content-length':
+                self.request.set_content_length(int(val))
+            elif key.lower() == 'content-type':
+                self.request.content_type = val
+            else:
+                self.request.headers_out.add(key, val)
+
+        return self.write
+
+    def write(self, data):
+        """ Write the request data  """
+
+        if not self.started:
+            self.started = True
+
+        self.request.write(data)
+
+
+def handler(req):
+    """ Execute the gluon app  """
+
+    Handler(req).run(gluon.main.wsgibase)
+    return apache.OK

ADDED   options_std.py
Index: options_std.py
==================================================================
--- /dev/null
+++ options_std.py
@@ -0,0 +1,33 @@
+#!/usr/bin/python
+# -*- coding: utf-8 -*-
+
+# when web2py is run as a windows service (web2py.exe -W)
+# it does not load the command line options but it
+# expects to find conifguration settings in a file called
+#
+#   web2py/options.py
+#
+# this file is an example for options.py
+
+import socket
+import os
+
+ip = '0.0.0.0'
+port = 80
+interfaces=[('0.0.0.0',80),('0.0.0.0',443,'ssl_private_key.pem','ssl_certificate.pem')]
+password = ''  # ##  means use the previous password
+pid_filename = 'httpserver.pid'
+log_filename = 'httpserver.log'
+profiler_filename = None
+#ssl_certificate = 'ssl_certificate.pem'  # ## path to certificate file
+#ssl_private_key = 'ssl_private_key.pem'  # ## path to private key file
+#numthreads = 50 # ## deprecated; remove
+minthreads = None
+maxthreads = None
+server_name = socket.gethostname()
+request_queue_size = 5
+timeout = 30
+shutdown_timeout = 5
+folder = os.getcwd()
+extcron = None
+nocron = None

ADDED   queue.example.yaml
Index: queue.example.yaml
==================================================================
--- /dev/null
+++ queue.example.yaml
@@ -0,0 +1,8 @@
+#  To configure Google App Engine task queues, copy this file to queue.yaml
+#  and edit as required
+#  See http://code.google.com/appengine/docs/python/config/queue.html
+
+queue:
+- name: default
+  rate: 20/m
+  bucket_size: 1

ADDED   router.example.py
Index: router.example.py
==================================================================
--- /dev/null
+++ router.example.py
@@ -0,0 +1,198 @@
+#!/usr/bin/python
+# -*- coding: utf-8 -*-
+
+#  routers are dictionaries of URL routing parameters.
+#
+#  For each request, the effective router is:
+#    the built-in default base router (shown below),
+#    updated by the BASE router in routes.py routers,
+#    updated by the app-specific router in routes.py routers (if any),
+#    updated by the app-specific router from applications/app/routes.py routers (if any)
+#
+#
+#  Router members:
+#
+#  default_application: default application name
+#  applications: list of all recognized applications, or 'ALL' to use all currently installed applications
+#      Names in applications are always treated as an application names when they appear first in an incoming URL.
+#      Set applications=None to disable the removal of application names from outgoing URLs.
+#  domains: optional dict mapping domain names to application names
+#      The domain name can include a port number: domain.com:8080
+#      The application name can include a controller:  appx/ctlrx
+#      Example:
+#      domains = {   "domain.com" : "app",
+#                  "x.domain.com" : "appx",
+#                },
+#  path_prefix: a path fragment that is prefixed to all outgoing URLs and stripped from all incoming URLs
+#
+#  Note: default_application, applications, domains & path_prefix are permitted only in the BASE router,
+#        and domain makes sense only in an application-specific router.
+#        The remaining members can appear in the BASE router (as defaults for all applications)
+#        or in application-specific routers.
+#
+#  default_controller: name of default controller
+#  default_function: name of default function (in all controllers)
+#  controllers: list of valid controllers in selected app
+#       or "DEFAULT" to use all controllers in the selected app plus 'static'
+#       or None to disable controller-name removal.
+#      Names in controllers are always treated as controller names when they appear in an incoming URL after
+#      the (optional) application and language names. 
+#  functions: list of valid functions in the default controller (default None)
+#      If present, the default function name will be omitted when the controller is the default controller
+#      and the first arg does not create an ambiguity.
+#  languages: list of all supported languages
+#      Names in languages are always treated as language names when they appear in an incoming URL after
+#      the (optional) application name. 
+#  default_language
+#       The language code (for example: en, it-it) optionally appears in the URL following
+#       the application (which may be omitted). For incoming URLs, the code is copied to
+#       request.language; for outgoing URLs it is taken from request.language.
+#       If languages=None, language support is disabled.
+#       The default_language, if any, is omitted from the URL.
+#  root_static: list of static files accessed from root (by default, favicon.ico & robots.txt)
+#       (mapped to the default application's static/ directory)
+#       Each default (including domain-mapped) application has its own root-static files.
+#  domain: the domain that maps to this application (alternative to using domains in the BASE router)
+#  exclusive_domain: If True (default is False), an exception is raised if an attempt is made to generate
+#                    an outgoing URL with a different application without providing an explicit host.
+#  map_hyphen: If True (default is False), hyphens in incoming /a/c/f fields are converted 
+#              to underscores, and back to hyphens in outgoing URLs.
+#              Language, args and the query string are not affected.
+#  map_static: By default, the default application is not stripped from static URLs. 
+#       Set map_static=True to override this policy.
+#  acfe_match: regex for valid application, controller, function, extension /a/c/f.e
+#  file_match: regex for valid file (used for static file names)
+#  args_match: regex for valid args
+#       This validation provides a measure of security. 
+#       If it is changed, the application perform its own validation.
+#
+#
+#  The built-in default router supplies default values (undefined members are None):
+#
+#     default_router = dict(
+#         default_application = 'init',
+#             applications = 'ALL',
+#         default_controller = 'default',
+#             controllers = 'DEFAULT',
+#         default_function = 'index',
+#             functions = None,
+#         default_language = None,
+#             languages = None,
+#         root_static = ['favicon.ico', 'robots.txt'],
+#         domains = None,
+#         map_hyphen = False,
+#         acfe_match = r'\w+$',              # legal app/ctlr/fcn/ext
+#         file_match = r'(\w+[-=./]?)+$',    # legal file (path) name
+#         args_match = r'([\w@ -]+[=.]?)+$', # legal arg in args
+#     )
+#
+#  See rewrite.map_url_in() and rewrite.map_url_out() for implementation details.
+
+
+#  This simple router set overrides only the default application name,
+#  but provides full rewrite functionality.
+
+routers = dict(
+
+    # base router
+    BASE = dict(
+        default_application = 'welcome',
+    ),
+)
+
+
+# Error-handling redirects all HTTP errors (status codes >= 400) to a specified
+# path.  If you wish to use error-handling redirects, uncomment the tuple
+# below.  You can customize responses by adding a tuple entry with the first
+# value in 'appName/HTTPstatusCode' format. ( Only HTTP codes >= 400 are
+# routed. ) and the value as a path to redirect the user to.  You may also use
+# '*' as a wildcard.
+#
+# The error handling page is also passed the error code and ticket as
+# variables.  Traceback information will be stored in the ticket.
+#
+# routes_onerror = [
+#     (r'init/400', r'/init/default/login')
+#    ,(r'init/*', r'/init/static/fail.html')
+#    ,(r'*/404', r'/init/static/cantfind.html')
+#    ,(r'*/*', r'/init/error/index')
+# ]
+
+# specify action in charge of error handling
+#
+# error_handler = dict(application='error',
+#                      controller='default',
+#                      function='index')
+
+# In the event that the error-handling page itself returns an error, web2py will
+# fall back to its old static responses.  You can customize them here.
+# ErrorMessageTicket takes a string format dictionary containing (only) the
+# "ticket" key.
+
+# error_message = '
    %s
    '
+# error_message_ticket = '
    Internal error
    Ticket issued:     %(ticket)s'
+
+def __routes_doctest():
+    '''
+    Dummy function for doctesting routes.py.
+
+    Use filter_url() to test incoming or outgoing routes;
+    filter_err() for error redirection.
+
+    filter_url() accepts overrides for method and remote host:
+        filter_url(url, method='get', remote='0.0.0.0', out=False)
+
+    filter_err() accepts overrides for application and ticket:
+        filter_err(status, application='app', ticket='tkt')
+
+    >>> import os
+    >>> import gluon.main
+    >>> from gluon.rewrite import load, filter_url, filter_err, get_effective_router
+    >>> load(routes=os.path.basename(__file__))
+
+    >>> filter_url('http://domain.com/abc', app=True)
+    'welcome'
+    >>> filter_url('http://domain.com/welcome', app=True)
+    'welcome'
+    >>> os.path.relpath(filter_url('http://domain.com/favicon.ico'))
+    'applications/welcome/static/favicon.ico'
+    >>> filter_url('http://domain.com/abc')
+    '/welcome/default/abc'
+    >>> filter_url('http://domain.com/index/abc')
+    "/welcome/default/index ['abc']"
+    >>> filter_url('http://domain.com/default/abc.css')
+    '/welcome/default/abc.css'
+    >>> filter_url('http://domain.com/default/index/abc')
+    "/welcome/default/index ['abc']"
+    >>> filter_url('http://domain.com/default/index/a bc')
+    "/welcome/default/index ['a bc']"
+
+    >>> filter_url('https://domain.com/app/ctr/fcn', out=True)
+    '/app/ctr/fcn'
+    >>> filter_url('https://domain.com/welcome/ctr/fcn', out=True)
+    '/ctr/fcn'
+    >>> filter_url('https://domain.com/welcome/default/fcn', out=True)
+    '/fcn'
+    >>> filter_url('https://domain.com/welcome/default/index', out=True)
+    '/'
+    >>> filter_url('https://domain.com/welcome/appadmin/index', out=True)
+    '/appadmin'
+    >>> filter_url('http://domain.com/welcome/default/fcn?query', out=True)
+    '/fcn?query'
+    >>> filter_url('http://domain.com/welcome/default/fcn#anchor', out=True)
+    '/fcn#anchor'
+    >>> filter_url('http://domain.com/welcome/default/fcn?query#anchor', out=True)
+    '/fcn?query#anchor'
+    
+    >>> filter_err(200)
+    200
+    >>> filter_err(399)
+    399
+    >>> filter_err(400)
+    400
+    '''
+    pass
+
+if __name__ == '__main__':
+    import doctest
+    doctest.testmod()

ADDED   routes.example.py
Index: routes.example.py
==================================================================
--- /dev/null
+++ routes.example.py
@@ -0,0 +1,165 @@
+#!/usr/bin/python
+# -*- coding: utf-8 -*-
+
+# default_application, default_controller, default_function
+# are used when the respective element is missing from the
+# (possibly rewritten) incoming URL
+#
+default_application = 'init'    # ordinarily set in base routes.py
+default_controller = 'default'  # ordinarily set in app-specific routes.py
+default_function = 'index'      # ordinarily set in app-specific routes.py
+
+# routes_app is a tuple of tuples.  The first item in each is a regexp that will
+# be used to match the incoming request URL. The second item in the tuple is
+# an applicationname.  This mechanism allows you to specify the use of an
+# app-specific routes.py. This entry is meaningful only in the base routes.py.
+#
+# Example: support welcome, admin, app and myapp, with myapp the default:
+
+
+routes_app = ((r'/(?Pwelcome|admin|app)\b.*', r'\g'),
+              (r'(.*)', r'myapp'),
+              (r'/?(.*)', r'myapp'))
+
+# routes_in is a tuple of tuples.  The first item in each is a regexp that will
+# be used to match the incoming request URL. The second item in the tuple is
+# what it will be replaced with.  This mechanism allows you to redirect incoming
+# routes to different web2py locations
+#
+# Example: If you wish for your entire website to use init's static directory:
+#
+#   routes_in=( (r'/static/(?P[\w./-]+)', r'/init/static/\g') )
+#
+
+routes_in = ((r'.*:/favicon.ico', r'/examples/static/favicon.ico'),
+             (r'.*:/robots.txt', r'/examples/static/robots.txt'),
+             ((r'.*http://otherdomain.com.* (?P.*)', r'/app/ctr\g')))
+
+# routes_out, like routes_in translates URL paths created with the web2py URL()
+# function in the same manner that route_in translates inbound URL paths.
+#
+
+routes_out = ((r'.*http://otherdomain.com.* /app/ctr(?P.*)', r'\g'),
+              (r'/app(?P.*)', r'\g'))
+
+# Error-handling redirects all HTTP errors (status codes >= 400) to a specified
+# path.  If you wish to use error-handling redirects, uncomment the tuple
+# below.  You can customize responses by adding a tuple entry with the first
+# value in 'appName/HTTPstatusCode' format. ( Only HTTP codes >= 400 are
+# routed. ) and the value as a path to redirect the user to.  You may also use
+# '*' as a wildcard.
+#
+# The error handling page is also passed the error code and ticket as
+# variables.  Traceback information will be stored in the ticket.
+#
+# routes_onerror = [
+#     (r'init/400', r'/init/default/login')
+#    ,(r'init/*', r'/init/static/fail.html')
+#    ,(r'*/404', r'/init/static/cantfind.html')
+#    ,(r'*/*', r'/init/error/index')
+# ]
+
+# specify action in charge of error handling
+#
+# error_handler = dict(application='error',
+#                      controller='default',
+#                      function='index')
+
+# In the event that the error-handling page itself returns an error, web2py will
+# fall back to its old static responses.  You can customize them here.
+# ErrorMessageTicket takes a string format dictionary containing (only) the
+# "ticket" key.
+
+# error_message = '
    %s
    '
+# error_message_ticket = '
    Internal error
    Ticket issued: %(ticket)s'
+
+# specify a list of apps that bypass args-checking and use request.raw_args
+#
+#routes_apps_raw=['myapp']
+#routes_apps_raw=['myapp', 'myotherapp']
+
+def __routes_doctest():
+    '''
+    Dummy function for doctesting routes.py.
+
+    Use filter_url() to test incoming or outgoing routes;
+    filter_err() for error redirection.
+
+    filter_url() accepts overrides for method and remote host:
+        filter_url(url, method='get', remote='0.0.0.0', out=False)
+
+    filter_err() accepts overrides for application and ticket:
+        filter_err(status, application='app', ticket='tkt')
+
+    >>> import os
+    >>> import gluon.main
+    >>> from gluon.rewrite import regex_select, load, filter_url, regex_filter_out, filter_err, compile_regex
+    >>> regex_select()
+    >>> load(routes=os.path.basename(__file__))
+
+    >>> os.path.relpath(filter_url('http://domain.com/favicon.ico'))
+    'applications/examples/static/favicon.ico'
+    >>> os.path.relpath(filter_url('http://domain.com/robots.txt'))
+    'applications/examples/static/robots.txt'
+    >>> filter_url('http://domain.com')
+    '/init/default/index'
+    >>> filter_url('http://domain.com/')
+    '/init/default/index'
+    >>> filter_url('http://domain.com/init/default/fcn')
+    '/init/default/fcn'
+    >>> filter_url('http://domain.com/init/default/fcn/')
+    '/init/default/fcn'
+    >>> filter_url('http://domain.com/app/ctr/fcn')
+    '/app/ctr/fcn'
+    >>> filter_url('http://domain.com/app/ctr/fcn/arg1')
+    "/app/ctr/fcn ['arg1']"
+    >>> filter_url('http://domain.com/app/ctr/fcn/arg1/')
+    "/app/ctr/fcn ['arg1']"
+    >>> filter_url('http://domain.com/app/ctr/fcn/arg1//')
+    "/app/ctr/fcn ['arg1', '']"
+    >>> filter_url('http://domain.com/app/ctr/fcn//arg1')
+    "/app/ctr/fcn ['', 'arg1']"
+    >>> filter_url('HTTP://DOMAIN.COM/app/ctr/fcn')
+    '/app/ctr/fcn'
+    >>> filter_url('http://domain.com/app/ctr/fcn?query')
+    '/app/ctr/fcn ?query'
+    >>> filter_url('http://otherdomain.com/fcn')
+    '/app/ctr/fcn'
+    >>> regex_filter_out('/app/ctr/fcn')
+    '/ctr/fcn'
+    >>> filter_url('https://otherdomain.com/app/ctr/fcn', out=True)
+    '/ctr/fcn'
+    >>> filter_url('https://otherdomain.com/app/ctr/fcn/arg1//', out=True)
+    '/ctr/fcn/arg1//'
+    >>> filter_url('http://otherdomain.com/app/ctr/fcn', out=True)
+    '/fcn'
+    >>> filter_url('http://otherdomain.com/app/ctr/fcn?query', out=True)
+    '/fcn?query'
+    >>> filter_url('http://otherdomain.com/app/ctr/fcn#anchor', out=True)
+    '/fcn#anchor'
+    >>> filter_err(200)
+    200
+    >>> filter_err(399)
+    399
+    >>> filter_err(400)
+    400
+    >>> filter_url('http://domain.com/welcome', app=True)
+    'welcome'
+    >>> filter_url('http://domain.com/', app=True)
+    'myapp'
+    >>> filter_url('http://domain.com', app=True)
+    'myapp'
+    >>> compile_regex('.*http://otherdomain.com.* (?P.*)', '/app/ctr\g')[0].pattern
+    '^.*http://otherdomain.com.* (?P.*)$'
+    >>> compile_regex('.*http://otherdomain.com.* (?P.*)', '/app/ctr\g')[1]
+    '/app/ctr\\\\g'
+    >>> compile_regex('/$c/$f', '/init/$c/$f')[0].pattern
+    '^.*?:https?://[^:/]+:[a-z]+ /(?P\\\\w+)/(?P\\\\w+)$'
+    >>> compile_regex('/$c/$f', '/init/$c/$f')[1]
+    '/init/\\\\g/\\\\g'
+    '''
+    pass
+
+if __name__ == '__main__':
+    import doctest
+    doctest.testmod()

ADDED   scgihandler.py
Index: scgihandler.py
==================================================================
--- /dev/null
+++ scgihandler.py
@@ -0,0 +1,71 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+scgihandler.py - handler for SCGI protocol
+
+Modified by Michele Comitini 
+from fcgihandler.py to support SCGI
+
+fcgihandler has the following copyright:
+" This file is part of the web2py Web Framework
+  Copyrighted by Massimo Di Pierro 
+  License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html) 
+"
+                                                                            
+This is a handler for lighttpd+scgi
+This file has to be in the PYTHONPATH
+Put something like this in the lighttpd.conf file:
+
+server.document-root="/var/www/web2py/"
+# for >= linux-2.6
+server.event-handler = "linux-sysepoll"
+
+url.rewrite-once = (
+      "^(/.+?/static/.+)$" => "/applications$1",
+      "(^|/.*)$" => "/handler_web2py.scgi$1",
+)
+scgi.server = ( "/handler_web2py.scgi" =>
+                  ("handler_web2py" =>
+                      ( "host" => "127.0.0.1",
+                        "port" => "4000",
+                        "check-local" => "disable", # don't forget to set "disable"!
+                      )
+    )
+)
+
+
+
+
+"""
+
+LOGGING = False
+SOFTCRON = False
+
+import sys
+import os
+
+path = os.path.dirname(os.path.abspath(__file__))
+os.chdir(path)
+sys.path = [path]+[p for p in sys.path if not p==path]
+
+import gluon.main
+
+# uncomment one of the two imports below depending on the SCGIWSGI server installed
+#import paste.util.scgiserver as scgi
+from wsgitools.scgi.forkpool import SCGIServer
+
+if LOGGING:
+    application = gluon.main.appfactory(wsgiapp=gluon.main.wsgibase,
+                                        logfilename='httpserver.log',
+                                        profilerfilename=None)
+else:
+    application = gluon.main.wsgibase
+
+if SOFTCRON:
+    from gluon.settings import global_settings
+    global_settings.web2py_crontype = 'soft'
+
+# uncomment one of the two rows below depending on the SCGIWSGI server installed
+#scgi.serve_application(application, '', 4000).run()
+SCGIServer(application, port=4000).run()

ADDED   scripts/autoroutes.py
Index: scripts/autoroutes.py
==================================================================
--- /dev/null
+++ scripts/autoroutes.py
@@ -0,0 +1,141 @@
+#!/usr/bin/python
+# -*- coding: utf-8 -*-
+'''
+autoroutes writes routes for you based on a simpler routing
+configuration file called routes.conf. Example:
+
+----- BEGIN routes.conf-------
+127.0.0.1   /examples/default
+domain1.com /app1/default
+domain2.com /app2/default
+domain3.com /app3/default
+----- END ----------
+
+It maps a domain (the left-hand side) to an app (one app per domain),
+and shortens the URLs for the app by removing the listed path prefix. That means:
+
+http://domain1.com/index is mapped to /app1/default/index
+http://domain2.com/index is mapped to /app2/default/index
+
+It preserves admin, appadmin, static files, favicon.ico and robots.txt:
+
+http://domain1.com/favicon.ico  /welcome/static/favicon.ico
+http://domain1.com/robots.txt   /welcome/static/robots.txt
+http://domain1.com/admin/...    /admin/...
+http://domain1.com/appadmin/... /app1/appadmin/...
+http://domain1.com/static/...   /app1/static/...
+
+and vice-versa.
+
+To use, cp scripts/autoroutes.py routes.py
+
+and either edit the config string below, or set config = "" and edit routes.conf
+'''
+
+config = '''
+127.0.0.1   /examples/default
+domain1.com /app1/default
+domain2.com /app2/default
+domain3.com /app3/defcon3
+'''
+if not config.strip():
+    try:
+        config_file = open('routes.conf','r')
+        try:
+            config = config_file.read()
+        finally:
+            config_file.close()
+    except:
+        config=''
+
+def auto_in(apps):
+    routes = [
+        ('/robots.txt','/welcome/static/robots.txt'),
+        ('/favicon.ico','/welcome/static/favicon.ico'),
+        ('/admin$anything','/admin$anything'),
+        ]
+    for domain,path in [x.strip().split() for x in apps.split('\n') if x.strip() and not x.strip().startswith('#')]:
+        if not path.startswith('/'): path = '/'+path
+        if path.endswith('/'): path = path[:-1]
+        app = path.split('/')[1]
+        routes += [
+            ('.*:https?://(.*\.)?%s:$method /' % domain,'%s' % path),
+            ('.*:https?://(.*\.)?%s:$method /static/$anything' % domain,'/%s/static/$anything' % app),
+            ('.*:https?://(.*\.)?%s:$method /appadmin/$anything' % domain,'/%s/appadmin/$anything' % app),
+            ('.*:https?://(.*\.)?%s:$method /$anything' % domain,'%s/$anything' % path),
+            ]
+    return routes
+
+def auto_out(apps):
+    routes = []
+    for domain,path in [x.strip().split() for x in apps.split('\n') if x.strip() and not x.strip().startswith('#')]:
+        if not path.startswith('/'): path = '/'+path
+        if path.endswith('/'): path = path[:-1]
+        app = path.split('/')[1]
+        routes += [
+            ('/%s/static/$anything' % app,'/static/$anything'),
+            ('/%s/appadmin/$anything' % app, '/appadmin/$anything'),
+            ('%s/$anything' % path, '/$anything'),
+            ]
+    return routes
+
+routes_in = auto_in(config)
+routes_out = auto_out(config)
+
+def __routes_doctest():
+    '''
+    Dummy function for doctesting autoroutes.py.
+
+    Use filter_url() to test incoming or outgoing routes;
+    filter_err() for error redirection.
+
+    filter_url() accepts overrides for method and remote host:
+        filter_url(url, method='get', remote='0.0.0.0', out=False)
+
+    filter_err() accepts overrides for application and ticket:
+        filter_err(status, application='app', ticket='tkt')
+
+    >>> filter_url('http://domain1.com/favicon.ico')
+    'http://domain1.com/welcome/static/favicon.ico'
+    >>> filter_url('https://domain2.com/robots.txt')
+    'https://domain2.com/welcome/static/robots.txt'
+    >>> filter_url('http://domain3.com/fcn')
+    'http://domain3.com/app3/defcon3/fcn'
+    >>> filter_url('http://127.0.0.1/fcn')
+    'http://127.0.0.1/examples/default/fcn'
+    >>> filter_url('HTTP://DOMAIN.COM/app/ctr/fcn')
+    'http://domain.com/app/ctr/fcn'
+    >>> filter_url('http://domain.com/app/ctr/fcn?query')
+    'http://domain.com/app/ctr/fcn?query'
+    >>> filter_url('http://otherdomain.com/fcn')
+    'http://otherdomain.com/fcn'
+    >>> regex_filter_out('/app/ctr/fcn')
+    '/app/ctr/fcn'
+    >>> regex_filter_out('/app1/ctr/fcn')
+    '/app1/ctr/fcn'
+    >>> filter_url('https://otherdomain.com/app1/default/fcn', out=True)
+    '/fcn'
+    >>> filter_url('http://otherdomain.com/app2/ctr/fcn', out=True)
+    '/app2/ctr/fcn'
+    >>> filter_url('http://domain1.com/app1/default/fcn?query', out=True)
+    '/fcn?query'
+    >>> filter_url('http://domain2.com/app3/defcon3/fcn#anchor', out=True)
+    '/fcn#anchor'
+    '''
+    pass
+
+if __name__ == '__main__':
+    try:
+        import gluon.main
+    except ImportError:
+        import sys, os
+        os.chdir(os.path.dirname(os.path.dirname(__file__)))
+        sys.path.append(os.path.dirname(os.path.dirname(__file__)))
+        import gluon.main
+    from gluon.rewrite import regex_select, load, filter_url, regex_filter_out
+    regex_select()          # use base routing parameters
+    load(routes=__file__)   # load this file
+
+    import doctest
+    doctest.testmod()
+

ADDED   scripts/cleancss.py
Index: scripts/cleancss.py
==================================================================
--- /dev/null
+++ scripts/cleancss.py
@@ -0,0 +1,20 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+import sys
+import re
+
+filename = sys.argv[1]
+
+datafile = open(filename, 'r')
+try:
+    data = datafile.read()
+finally:
+    datafile.close()
+data = re.compile('\s*{\s*').sub(' { ', data)
+data = re.compile('\s*;\s*').sub('; ', data)
+data = re.compile('\s*}\s*').sub(' }\n', data)
+data = re.compile('[ ]+').sub(' ', data)
+
+print data
+

ADDED   scripts/cleanhtml.py
Index: scripts/cleanhtml.py
==================================================================
--- /dev/null
+++ scripts/cleanhtml.py
@@ -0,0 +1,61 @@
+import sys
+import re
+
+def cleancss(text):
+    text=re.compile('\s+').sub(' ', text)
+    text=re.compile('\s*(?P,|:)\s*').sub('\g ', text)
+    text=re.compile('\s*;\s*').sub(';\n    ', text)
+    text=re.compile('\s*\{\s*').sub(' {\n    ', text)
+    text=re.compile('\s*\}\s*').sub('\n}\n\n', text)
+    return text
+
+def cleanhtml(text):
+    text=text.lower()
+    r=re.compile('\', re.DOTALL)
+    scripts=r.findall(text)
+    text=r.sub('
+        
+' >/etc/uwsgi-python/apps-available/web2py.xml
+ln -s /etc/uwsgi-python/apps-available/web2py.xml /etc/uwsgi-python/apps-enabled/web2py.xml
+
+# Install Web2py
+apt-get -y install unzip
+cd /home
+mkdir www-data
+cd www-data
+wget http://web2py.com/examples/static/web2py_src.zip
+unzip web2py_src.zip
+rm web2py_src.zip
+chown -R www-data:www-data web2py
+cd /home/www-data/web2py
+sudo -u www-data python -c "from gluon.main import save_password; save_password('$PW',443)"
+/etc/init.d/uwsgi-python restart
+/etc/init.d/nginx restart

ADDED   scripts/setup-web2py-ubuntu.sh
Index: scripts/setup-web2py-ubuntu.sh
==================================================================
--- /dev/null
+++ scripts/setup-web2py-ubuntu.sh
@@ -0,0 +1,169 @@
+echo "This script will:
+1) install all modules need to run web2py on Ubuntu/Debian
+2) install web2py in /home/www-data/
+3) create a self signed sll certificate
+4) setup web2py with mod_wsgi
+5) overwrite /etc/apache2/sites-available/default
+6) restart apache.
+
+You may want to read this cript before running it.
+
+Press a key to continue...[ctrl+C to abort]"
+
+read CONFIRM
+
+#!/bin/bash
+# optional
+# dpkg-reconfigure console-setup
+# dpkg-reconfigure timezoneconf
+# nano /etc/hostname
+# nano /etc/network/interfaces
+# nano /etc/resolv.conf
+# reboot now
+# ifconfig eth0
+
+echo "installing useful packages"
+echo "=========================="
+apt-get update
+apt-get -y install ssh
+apt-get -y install zip unzip
+apt-get -y install tar
+apt-get -y install openssh-server
+apt-get -y install build-essential
+apt-get -y install python2.5
+apt-get -y install ipython
+apt-get -y install python-dev
+apt-get -y install postgresql
+apt-get -y install apache2
+apt-get -y install libapache2-mod-wsgi
+apt-get -y install python2.5-psycopg2
+apt-get -y install postfix
+apt-get -y install wget
+apt-get -y install python-matplotlib
+apt-get -y install python-reportlab
+apt-get -y install mercurial
+/etc/init.d/postgresql restart
+
+# optional, uncomment for emacs
+# apt-get -y install emacs
+
+# optional, uncomment for backups using samba
+# apt-get -y install samba
+# apt-get -y install smbfs
+
+echo "downloading, installing and starting web2py"
+echo "==========================================="
+cd /home
+mkdir www-data
+cd www-data
+rm web2py_src.zip*
+wget http://web2py.com/examples/static/web2py_src.zip
+unzip web2py_src.zip
+chown -R www-data:www-data web2py
+
+echo "setting up apache modules"
+echo "========================="
+a2enmod ssl
+a2enmod proxy
+a2enmod proxy_http
+a2enmod headers
+a2enmod expires
+mkdir /etc/apache2/ssl
+
+echo "creating a self signed certificate"
+echo "=================================="
+openssl genrsa 1024 > /etc/apache2/ssl/self_signed.key
+chmod 400 /etc/apache2/ssl/self_signed.key
+openssl req -new -x509 -nodes -sha1 -days 365 -key /etc/apache2/ssl/self_signed.key > /etc/apache2/ssl/self_signed.cert
+openssl x509 -noout -fingerprint -text < /etc/apache2/ssl/self_signed.cert > /etc/apache2/ssl/self_signed.info
+
+echo "rewriting your apache config file to use mod_wsgi"
+echo "================================================="
+echo '
+NameVirtualHost *:80
+NameVirtualHost *:443
+
+
+  WSGIDaemonProcess web2py user=www-data group=www-data
+  WSGIProcessGroup web2py
+  WSGIScriptAlias / /home/www-data/web2py/wsgihandler.py
+
+  
+    AllowOverride None
+    Order Allow,Deny
+    Deny from all
+    
+      Allow from all
+    
+  
+
+  AliasMatch ^/([^/]+)/static/(.*) \
+           /home/www-data/web2py/applications/$1/static/$2
+  
+    Options -Indexes
+    Order Allow,Deny
+    Allow from all
+  
+
+  
+  Deny from all
+  
+
+  
+  Deny from all
+  
+
+  CustomLog /var/log/apache2/access.log common
+  ErrorLog /var/log/apache2/error.log
+
+
+
+  SSLEngine on
+  SSLCertificateFile /etc/apache2/ssl/self_signed.cert
+  SSLCertificateKeyFile /etc/apache2/ssl/self_signed.key
+
+  WSGIProcessGroup web2py
+
+  WSGIScriptAlias / /home/www-data/web2py/wsgihandler.py
+
+  
+    AllowOverride None
+    Order Allow,Deny
+    Deny from all
+    
+      Allow from all
+    
+  
+
+  AliasMatch ^/([^/]+)/static/(.*) \
+        /home/www-data/web2py/applications/$1/static/$2
+
+  
+    Options -Indexes
+    ExpiresActive On
+    ExpiresDefault "access plus 1 hour"
+    Order Allow,Deny
+    Allow from all
+  
+
+  CustomLog /var/log/apache2/access.log common
+  ErrorLog /var/log/apache2/error.log
+
+' > /etc/apache2/sites-available/default
+
+# echo "setting up PAM"
+# echo "================"
+# sudo apt-get install pwauth
+# sudo ln -s /etc/apache2/mods-available/authnz_external.load /etc/apache2/mods-enabled
+# ln -s /etc/pam.d/apache2 /etc/pam.d/httpd
+# usermod -a -G shadow www-data
+
+echo "restarting apage"
+echo "================"
+
+/etc/init.d/apache2 restart
+cd /home/www-data/web2py
+sudo -u www-data python -c "from gluon.widget import console; console();"
+sudo -u www-data python -c "from gluon.main import save_password; save_password(raw_input('admin password: '),443)"
+echo "done!"
+

ADDED   scripts/sync_languages.py
Index: scripts/sync_languages.py
==================================================================
--- /dev/null
+++ scripts/sync_languages.py
@@ -0,0 +1,47 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+# TODO: Comment this code
+
+import sys
+import shutil
+import os
+
+from gluon.languages import findT
+
+sys.path.insert(0, '.')
+
+file = sys.argv[1]
+apps = sys.argv[2:]
+
+d = {}
+for app in apps:
+    path = 'applications/%s/' % app
+    findT(path, file)
+    langfile = open(os.path.join(path, 'languages', '%s.py' % file))
+    try:
+        data = eval(langfile.read())
+    finally:
+        langfile.close()
+    d.update(data)
+
+path = 'applications/%s/' % apps[-1]
+file1 = os.path.join(path, 'languages', '%s.py' % file)
+
+f = open(file1, 'w')
+try:
+    f.write('{\n')
+    keys = d.keys()
+    keys.sort()
+    for key in keys:
+        f.write('%s:%s,\n' % (repr(key), repr(str(d[key]))))
+    f.write('}\n')
+finally:
+    f.close()
+
+oapps = reversed(apps[:-1])
+for app in oapps:
+    path2 = 'applications/%s/' % app
+    file2 = os.path.join(path2, 'languages', '%s.py' % file)
+    shutil.copyfile(file1, file2)
+

ADDED   scripts/tickets2db.py
Index: scripts/tickets2db.py
==================================================================
--- /dev/null
+++ scripts/tickets2db.py
@@ -0,0 +1,60 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+import sys
+import os
+import time
+import stat
+import datetime
+
+from gluon.utils import md5_hash
+from gluon.restricted import RestrictedError
+
+SLEEP_MINUTES = 5
+DB_URI = 'sqlite://tickets.db'
+ALLOW_DUPLICATES = True
+
+path = os.path.join(request.folder, 'errors')
+
+db = SQLDB(DB_URI)
+db.define_table('ticket', SQLField('app'), SQLField('name'),
+                SQLField('date_saved', 'datetime'), SQLField('layer'),
+                SQLField('traceback', 'text'), SQLField('code', 'text'))
+
+hashes = {}
+
+while 1:
+    for file in os.listdir(path):
+        filename = os.path.join(path, file)
+
+        if not ALLOW_DUPLICATES:
+            fileobj = open(filename, 'r')
+            try:
+                file_data = fileobj.read()
+            finally:
+                fileobj.close()
+            key = md5_hash(file_data)
+
+            if key in hashes:
+                continue
+
+            hashes[key] = 1
+
+        error = RestrictedError()
+        error.load(request, request.application, filename)
+
+        modified_time = os.stat(filename)[stat.ST_MTIME]
+        modified_time = datetime.datetime.fromtimestamp(modified_time)
+
+        db.ticket.insert(app=request.application,
+                         date_saved=modified_time,
+                         name=file,
+                         layer=error.layer,
+                         traceback=error.traceback,
+                         code=error.code)
+
+        os.unlink(filename)
+
+    db.commit()
+    time.sleep(SLEEP_MINUTES * 60)
+

ADDED   scripts/tickets2email.py
Index: scripts/tickets2email.py
==================================================================
--- /dev/null
+++ scripts/tickets2email.py
@@ -0,0 +1,51 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+import sys
+import os
+import time
+import stat
+import datetime
+
+from gluon.utils import md5_hash
+from gluon.restricted import RestrictedError
+from gluon.tools import Mail
+
+
+path = os.path.join(request.folder, 'errors')
+hashes = {}
+mail = Mail()
+
+### CONFIGURE HERE
+SLEEP_MINUTES = 5
+ALLOW_DUPLICATES = True
+mail.settings.server = 'localhost:25'
+mail.settings.sender = 'you@localhost'
+administrator_email = 'you@localhost'
+### END CONFIGURATION
+
+while 1:
+    for file in os.listdir(path):
+        filename = os.path.join(path, file)
+
+        if not ALLOW_DUPLICATES:
+            fileobj = open(filename, 'r')
+            try:
+                file_data = fileobj.read()
+            finally:
+                fileobj.close()
+            key = md5_hash(file_data)
+
+            if key in hashes:
+                continue
+
+            hashes[key] = 1
+
+        error = RestrictedError()
+        error.load(request, request.application, filename)
+
+        mail.send(to=administrator_email, subject='new web2py ticket', message=error.traceback)
+
+        os.unlink(filename)
+    time.sleep(SLEEP_MINUTES * 60)
+

ADDED   scripts/update-web2py.sh
Index: scripts/update-web2py.sh
==================================================================
--- /dev/null
+++ scripts/update-web2py.sh
@@ -0,0 +1,59 @@
+#!/bin/bash
+#
+#  update-web2py.sh
+#  2009-12-16
+#
+#  install in web2py/.. or web2py/ or web2py/scripts as update-web2py.sh
+#  make executable: chmod +x web2py.sh
+#
+#  save a snapshot of current web2py/ as web2py/../web2py-version.zip
+#  download the current stable version of web2py
+#  unzip downloaded version over web2py/
+#
+TARGET=web2py
+
+if [ ! -d $TARGET ]; then
+	# in case we're in web2py/
+	if [ -f ../$TARGET/VERSION ]; then
+		cd ..
+	# in case we're in web2py/scripts
+	elif [ -f ../../$TARGET/VERSION ]; then
+		cd ../..
+	fi
+fi
+read a VERSION c < $TARGET/VERSION
+SAVE=$TARGET-$VERSION
+URL=http://www.web2py.com/examples/static/web2py_src.zip
+
+ZIP=`basename $URL`
+SAVED=""
+
+#  Save a zip archive of the current version,
+#  but don't overwrite a previous save of the same version.
+#
+if [ -f $SAVE.zip ]; then
+	echo "Remove or rename $SAVE.zip first" >&2
+	exit 1
+fi
+if [ -d $TARGET ]; then
+	echo -n ">>Save old version: " >&2
+	cat $TARGET/VERSION >&2
+	zip -q -r $SAVE.zip $TARGET
+	SAVED=$SAVE.zip
+fi
+#
+#  Download the new version.
+#
+echo ">>Download latest web2py release:" >&2
+curl -O $URL
+#
+#  Unzip into web2py/
+#
+unzip -q -o $ZIP
+rm $ZIP
+echo -n ">>New version: " >&2
+cat $TARGET/VERSION >&2
+if [ "$SAVED" != "" ]; then
+	echo ">>Old version saved as $SAVED"
+fi
+

ADDED   scripts/web2py-lock.sh
Index: scripts/web2py-lock.sh
==================================================================
--- /dev/null
+++ scripts/web2py-lock.sh
@@ -0,0 +1,11 @@
+chown -R nobody:nobody *.py
+chown -R nobody:nobody gluon
+chown -R nobody:nobody scripts
+chown -R nobody:nobody applications/*/modules/
+chown -R nobody:nobody applications/*/models/
+chown -R nobody:nobody applications/*/controllers/
+chown -R nobody:nobody applications/*/views/
+chown -R nobody:nobody applications/*/static/
+chown -R nobody:nobody applications/*/cron/
+
+echo "unlock with chown -R www-data:www-data ./"

ADDED   scripts/web2py.archlinux.sh
Index: scripts/web2py.archlinux.sh
==================================================================
--- /dev/null
+++ scripts/web2py.archlinux.sh
@@ -0,0 +1,44 @@
+#!/bin/bash
+# the script should be run
+# from WEB2PY root directory
+
+prog=`basename $0`
+
+cd `pwd`
+chmod +x $prog
+
+function web2py_start {
+  nohup ./$prog -a "" 2>/dev/null &
+  pid=`pgrep $prog | tail -1`
+  if [ $pid -ne $$ ]
+  then
+    echo "WEB2PY has been started."
+  fi
+}
+function web2py_stop {
+  kill -15 `pgrep $prog | grep -v $$` 2>/dev/null
+  pid=`pgrep $prog | head -1`
+  if [ $pid -ne $$ ]
+  then
+    echo "WEB2PY has been stopped."
+  fi
+}
+
+case "$1" in
+  start)
+    web2py_start
+  ;;
+  stop)
+    web2py_stop
+  ;;
+  restart)
+    web2py_stop
+    web2py_start
+  ;;
+  *)
+    echo "Usage: $prog [start|stop|restart]"
+  ;;
+esac
+
+exit 0
+

ADDED   scripts/web2py.fedora.sh
Index: scripts/web2py.fedora.sh
==================================================================
--- /dev/null
+++ scripts/web2py.fedora.sh
@@ -0,0 +1,89 @@
+#!/bin/bash
+#
+#       /etc/rc.d/init.d/web2pyd
+#
+# Starts the Web2py Daemon on Fedora (Red Hat Linux)
+#
+# To execute automatically at startup
+#
+#    sudo chkconfig --add web2pyd
+#
+# chkconfig: 2345 90 10
+# description: Web2py Daemon
+# processname: web2pyd
+# pidfile: /var/lock/subsys/web2pyd
+
+source /etc/rc.d/init.d/functions
+
+RETVAL=0
+NAME=web2pyd
+DESC="Web2py Daemon"
+DAEMON_DIR="/usr/lib/web2py"
+ADMINPASS="admin"
+#ADMINPASS="\"
+PIDFILE=/var/run/$NAME.pid
+PORT=8001
+PYTHON=python
+
+cd $DAEMON_DIR
+
+start() {
+	echo -n $"Starting $DESC ($NAME): "
+	daemon --check $NAME $PYTHON $DAEMON_DIR/web2py.py -Q --nogui -a $ADMINPASS -d $PIDFILE -p $PORT &
+	RETVAL=$?
+	if [ $RETVAL -eq 0 ]; then
+		touch /var/lock/subsys/$NAME
+	fi
+	echo
+	return $RETVAL
+}
+
+stop() {
+	echo -n $"Shutting down $DESC ($NAME): "
+	if [ -r "$PIDFILE" ]; then
+		pid=`cat $PIDFILE`
+		kill -TERM $pid
+		RETVAL=$?
+	else
+		RETVAL=1
+	fi
+	[ $RETVAL -eq 0 ] && success || failure
+	echo
+	if [ $RETVAL -eq 0 ]; then
+		rm -f /var/lock/subsys/$NAME
+		rm -f $PIDFILE
+	fi
+	return $RETVAL
+}
+
+restart() {
+	stop
+	start
+}
+
+status() {
+	if [ -r "$PIDFILE" ]; then
+		pid=`cat $PIDFILE`
+	fi
+	if [ $pid ]; then
+		echo "$NAME (pid $pid) is running..."
+	else
+		echo "$NAME is stopped"
+	fi
+}
+
+case "$1" in
+	start)              start;;
+	stop)               stop;;
+	status)             status;;
+	restart)            restart;;
+	condrestart)        [ -e /var/lock/subsys/$NAME ] && restart
+	                    RETVAL=$?
+	                    ;;
+	*)                  echo $"Usage: $0 {start|stop|restart|condrestart|status}"
+	                    RETVAL=1
+	                    ;;
+esac
+
+exit $RETVAL
+

ADDED   scripts/web2py.ubuntu.sh
Index: scripts/web2py.ubuntu.sh
==================================================================
--- /dev/null
+++ scripts/web2py.ubuntu.sh
@@ -0,0 +1,223 @@
+#! /bin/sh
+### BEGIN INIT INFO
+# startup script for Ubuntu and Debian Linux servers
+#
+# To use this file
+# cp ubuntu.sh /etc/init.d/web2py
+#
+# To automatitcally start at reboot
+# sudo update-rc.d web2py defaults
+#
+# Provides:          web2py
+# Required-Start:    $local_fs $remote_fs
+# Required-Stop:     $local_fs $remote_fs
+# Default-Start:     2 3 4 5
+# Default-Stop:      S 0 1 6
+# Short-Description: web2py initscript
+# Description:       This file starts up the web2py server.
+### END INIT INFO
+
+# Author: Mark Moore 
+
+PATH=/usr/sbin:/usr/bin:/sbin:/bin
+DESC="Web Framework"
+NAME=web2py
+PIDDIR=/var/run/$NAME
+PIDFILE=$PIDDIR/$NAME.pid
+SCRIPTNAME=/etc/init.d/$NAME
+DAEMON=/usr/bin/python
+DAEMON_DIR=/usr/lib/$NAME
+DAEMON_ARGS="web2py.py --password= --pid_filename=$PIDFILE"
+DAEMON_USER=web2py
+
+# Exit if the package is not installed
+[ -x "$DAEMON" ] || exit 0
+
+# Read configuration variable file if it is present
+[ -r /etc/default/$NAME ] && . /etc/default/$NAME
+
+# Load the VERBOSE setting and other rcS variables
+[ -f /etc/default/rcS ] && . /etc/default/rcS
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
+. /lib/lsb/init-functions
+
+#
+# Function that starts the daemon/service
+#
+do_start()
+{
+	# Return
+	#   0 if daemon has been started
+	#   1 if daemon was already running
+	#   2 if daemon could not be started
+
+	# The PIDDIR should normally be created during installation. This
+	# fixes things just in case.
+	[ -d $PIDDIR ] || mkdir -p $PIDDIR
+        [ -n "$DAEMON_USER" ] && chown --recursive $DAEMON_USER $PIDDIR
+
+	# Check to see if the daemon is already running.
+	start-stop-daemon --stop --test --quiet --pidfile $PIDFILE \
+		&& return 1
+
+	start-stop-daemon --start --quiet --pidfile $PIDFILE \
+		${DAEMON_USER:+--chuid $DAEMON_USER} --chdir $DAEMON_DIR \
+		--background --exec $DAEMON -- $DAEMON_ARGS \
+		|| return 2
+
+	return 0;
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+	# Return
+	#   0 if daemon has been stopped
+	#   1 if daemon was already stopped
+	#   2 if daemon could not be stopped
+	#   other if a failure occurred
+
+	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE
+	RETVAL=$?
+	# Many daemons don't delete their pidfiles when they exit.
+	rm -f $PIDFILE
+	return "$RETVAL"
+}
+
+#
+# Function that restarts the daemon/service
+#
+do_restart()
+{
+	# Return
+	#   0 if daemon was (re-)started
+	#   1 if daemon was not strated or re-started
+
+	do_stop
+	case "$?" in
+		0|1)
+			do_start
+			case "$?" in
+				0) RETVAL=0 ;;
+				1) RETVAL=1 ;; # Old process is still running
+				*) RETVAL=1 ;; # Failed to start
+			esac
+			;;
+		*) RETVAL=1 ;; # Failed to stop
+	esac
+
+	return "$RETVAL"
+}
+
+#
+# Function that sends a SIGHUP to the daemon/service
+#
+do_reload() {
+	#
+	# If the daemon can reload its configuration without
+	# restarting (for example, when it is sent a SIGHUP),
+	# then implement that here.
+	#
+	start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE
+	return 0
+}
+
+#
+# Function that queries the status of the daemon/service
+#
+do_status()
+{
+	# Return
+	#   0 if daemon is responding and OK
+	#   1 if daemon is not responding, but PIDFILE exists
+	#   2 if daemon is not responding, but LOCKFILE exists
+	#   3 if deamon is not running
+	#   4 if daemon status is unknown
+
+	# Check to see if the daemon is already running.
+	start-stop-daemon --stop --test --quiet --pidfile $PIDFILE \
+		&& return 0
+	[ -f $PIDFILE ] && return 1
+	return 3
+}
+
+case "$1" in
+  start)
+	[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
+	do_start
+	RETVAL=$?
+	[ "$VERBOSE" != no ] &&
+	case "$RETVAL" in
+		0|1) log_end_msg 0 ;;
+		*)   log_end_msg 1 ;;
+	esac
+	exit "$RETVAL"
+	;;
+  stop)
+	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+	do_stop
+	RETVAL=$?
+	[ "$VERBOSE" != no ] &&
+	case "$RETVAL" in
+		0|1) log_end_msg 0 ;;
+		*)   log_end_msg 1 ;;
+	esac
+	exit "$RETVAL"
+	;;
+  #reload|force-reload)
+	#
+	# If do_reload() is not implemented then leave this commented out
+	# and leave 'force-reload' as an alias for 'restart'.
+	#
+	#[ "$VERBOSE" != no ] && log_daemon_msg "Reloading $DESC" "$NAME"
+	#do_reload
+	#RETVAL=$?
+	#[ "$VERBOSE" != no ] && log_end_msg $?
+	#exit "$RETVAL"
+	#;;
+  restart|force-reload)
+	#
+	# If the "reload" option is implemented then remove the
+	# 'force-reload' alias
+	#
+	[ "$VERBOSE" != no ] && log_daemon_msg "Restarting $DESC" "$NAME"
+	do_restart
+	RETVAL=$?
+	[ "$VERBOSE" != no ] && log_end_msg "$RETVAL"
+	exit "$RETVAL"
+	;;
+  status)
+    do_status
+	RETVAL=$?
+    [ "$VERBOSE" != no ] &&
+	case "$RETVAL" in
+	  0) log_success_msg "$NAME is running" ;;
+	  *) log_failure_msg "$NAME is not running" ;;
+	esac
+    exit "$RETVAL"
+	;;
+  *)
+	echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload|status}" >&2
+	exit 3
+	;;
+esac
+
+:
+
+# This was based off /etc/init.d/skeleton from the Ubuntu 8.04 Hardy release.
+# (md5sum: da0162012b6a916bdbd4e2580282af78).  If we notice that changes, we
+# should re-examine things.
+
+# The configuration at the very top seems to be documented as part of the
+# Linux Standard Base (LSB) Specification.  See section 20.6 Facility Names
+# in particular.  This is also where I got the spec for the status parm.
+
+# References:
+# http://refspecs.linux-foundation.org/LSB_3.2.0/LSB-Core-generic/LSB-Core-generic.pdf
+# Debian Policy SysV init: http://www.debian.org/doc/debian-policy/ch-opersys.html#s-sysvinit
+# Examine files in /usr/share/doc/sysv-rc/
+

ADDED   setup.py
Index: setup.py
==================================================================
--- /dev/null
+++ setup.py
@@ -0,0 +1,80 @@
+#!/usr/bin/env python
+
+from distutils.core import setup
+from gluon.fileutils import tar, untar, read_file, write_file
+import tarfile
+import sys
+
+def tar(file, filelist, expression='^.+$'):
+    """
+    tars dir/files into file, only tars file that match expression
+    """
+
+    tar = tarfile.TarFile(file, 'w')
+    try:
+        for element in filelist:
+            try:
+                for file in listdir(element, expression, add_dirs=True):
+                    tar.add(os.path.join(element, file), file, False)
+            except:
+                tar.add(element)
+    finally:
+        tar.close()
+
+def start():
+    if 'sdist' in sys.argv:
+        tar('gluon/env.tar',['applications','VERSION','splashlogo.gif'])
+
+    setup(name='web2py',
+          version=read_file("VERSION").split()[1],
+          description="""full-stack framework for rapid development and prototyping
+        of secure database-driven web-based applications, written and
+        programmable in Python.""",
+          long_description="""
+        Everything in one package with no dependencies. Development, deployment,
+        debugging, testing, database administration and maintenance of applications can
+        be done via the provided web interface. web2py has no configuration files,
+        requires no installation, can run off a USB drive. web2py uses Python for the
+        Model, the Views and the Controllers, has a built-in ticketing system to manage
+        errors, an internationalization engine, works with SQLite, PostgreSQL, MySQL,
+        MSSQL, FireBird, Oracle, IBM DB2, Informix, Ingres, sybase and Google App Engine via a
+        Database Abstraction Layer. web2py includes libraries to handle
+        HTML/XML, RSS, ATOM, CSV, RTF, JSON, AJAX, XMLRPC, WIKI markup. Production
+        ready, capable of upload/download streaming of very large files, and always
+        backward compatible.
+        """,
+          author='Massimo Di Pierro',
+          author_email='mdipierro@cs.depaul.edu',
+          license = 'http://web2py.com/examples/default/license',
+          classifiers = ["Development Status :: 5 - Production/Stable"],
+          url='http://web2py.com',
+          platforms ='Windows, Linux, Mac, Unix,Windows Mobile',
+          packages=['gluon',
+                    'gluon/contrib',
+                    'gluon/contrib/gateways',
+                    'gluon/contrib/login_methods',
+                    'gluon/contrib/markdown',
+                    'gluon/contrib/markmin',
+                    'gluon/contrib/memcache',
+                    'gluon/contrib/pyfpdf',
+                    'gluon/contrib/pymysql',
+                    'gluon/contrib/pyrtf',
+                    'gluon/contrib/pysimplesoap',
+                    'gluon/contrib/simplejson',
+                    'gluon/tests',
+                    ],
+          package_data = {'gluon':['env.tar']},
+          scripts = ['mkweb2pyenv','runweb2py'],
+          )
+    
+if __name__ == '__main__':
+    print "web2py does not require installation and"
+    print "you should just start it with:"
+    print 
+    print "$ python web2py.py"
+    print 
+    print "are you sure you want to install it anyway (y/n)?"
+    s = raw_input('>')
+    if s.lower()[:1]=='y':
+        start()
+        

ADDED   setup_app.py
Index: setup_app.py
==================================================================
--- /dev/null
+++ setup_app.py
@@ -0,0 +1,54 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This is a setup.py script generated by py2applet
+
+Usage:
+    python setup.py py2app
+"""
+
+from setuptools import setup
+from gluon.import_all import base_modules, contributed_modules
+import os
+import fnmatch
+
+class reglob:
+    def __init__(self, directory, pattern="*"):
+        self.stack = [directory]
+        self.pattern = pattern
+        self.files = []
+        self.index = 0
+    def __getitem__(self, index):
+        while 1:
+            try:
+                file = self.files[self.index]
+                self.index = self.index + 1
+            except IndexError:
+                self.index = 0
+                self.directory = self.stack.pop()
+                self.files = os.listdir(self.directory)
+            else:
+                fullname = os.path.join(self.directory, file)
+                if os.path.isdir(fullname) and not os.path.islink(fullname):
+                    self.stack.append(fullname)
+                if not (file.startswith('.') or file.startswith('#') or file.endswith('~')) \
+                        and fnmatch.fnmatch(file, self.pattern):
+                    return fullname
+
+setup(app=['web2py.py'],
+      data_files=[
+        'NEWINSTALL',
+        'ABOUT',
+        'LICENSE',
+        'VERSION',
+        ] + \
+          [x for x in reglob('applications/examples')] + \
+          [x for x in reglob('applications/welcome')] + \
+          [x for x in reglob('applications/admin')],
+      options={'py2app': {
+            'argv_emulation': True,
+            'includes': base_modules,
+            'packages': contributed_modules,
+            }},
+      setup_requires=['py2app'])

ADDED   setup_exe.py
Index: setup_exe.py
==================================================================
--- /dev/null
+++ setup_exe.py
@@ -0,0 +1,184 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+Usage:
+    Install py2exe: http://sourceforge.net/projects/py2exe/files/
+    Copy script to the web2py directory
+    c:\bin\python26\python build_windows_exe.py py2exe
+
+Adapted from http://bazaar.launchpad.net/~flavour/sahana-eden/trunk/view/head:/static/scripts/tools/standalone_exe.py
+"""
+
+from distutils.core import setup
+import py2exe
+from gluon.import_all import base_modules, contributed_modules
+from gluon.fileutils import readlines_file
+from glob import glob
+import fnmatch
+import os
+import shutil
+import sys
+import re
+import zipfile
+
+#read web2py version from VERSION file
+web2py_version_line = readlines_file('VERSION')[0]
+#use regular expression to get just the version number
+v_re = re.compile('[0-9]+\.[0-9]+\.[0-9]+')
+web2py_version = v_re.search(web2py_version_line).group(0)
+
+#pull in preferences from config file
+import ConfigParser
+Config = ConfigParser.ConfigParser()
+Config.read('setup_exe.conf')
+remove_msft_dlls = Config.getboolean("Setup", "remove_microsoft_dlls")
+copy_apps = Config.getboolean("Setup", "copy_apps")
+copy_site_packages = Config.getboolean("Setup", "copy_site_packages")
+copy_scripts = Config.getboolean("Setup", "copy_scripts")
+make_zip = Config.getboolean("Setup", "make_zip")
+zip_filename = Config.get("Setup", "zip_filename")
+remove_build_files = Config.getboolean("Setup", "remove_build_files")
+
+
+# Python base version
+python_version = sys.version[:3]
+
+# List of modules deprecated in python2.6 that are in the above set
+py26_deprecated = ['mhlib', 'multifile', 'mimify', 'sets', 'MimeWriter']
+
+if python_version == '2.6':
+    base_modules += ['json', 'multiprocessing']
+    base_modules = list(set(base_modules).difference(set(py26_deprecated)))
+
+
+#I don't know if this is even necessary
+if python_version == '2.6':
+    # Python26 compatibility: http://www.py2exe.org/index.cgi/Tutorial#Step52
+    try:
+        shutil.copytree('C:\Bin\Microsoft.VC90.CRT', 'dist/')
+    except:
+        print "You MUST copy Microsoft.VC90.CRT folder into the dist directory"
+
+
+setup(
+  console=['web2py.py'],
+  windows=[{'script':'web2py.py',
+    'dest_base':'web2py_no_console' # MUST NOT be just 'web2py' otherwise it overrides the standard web2py.exe
+    }],
+  name="web2py",
+  version=web2py_version,
+  description="web2py web framework",
+  author="Massimo DiPierro",
+  license = "LGPL v3",
+  data_files=[
+        'ABOUT',
+        'LICENSE',
+        'VERSION',
+        'splashlogo.gif',
+        'logging.example.conf',
+        'options_std.py',
+        'app.example.yaml',
+        'queue.example.yaml'
+        ],
+  options={'py2exe': {
+    'packages': contributed_modules,
+    'includes': base_modules,
+    }},
+  )
+
+print "web2py binary successfully built"
+
+def copy_folders(source, destination):
+    """Copy files & folders from source to destination (within dist/)"""
+    if os.path.exists(os.path.join('dist',destination)):
+        shutil.rmtree(os.path.join('dist',destination))
+    shutil.copytree(os.path.join(source), os.path.join('dist',destination))
+
+#should we remove Windows OS dlls user is unlikely to be able to distribute
+
+if remove_msft_dlls:
+    print "Deleted Microsoft files not licensed for open source distribution"
+    print "You are still responsible for making sure you have the rights to distribute any other included files!"
+    #delete the API-MS-Win-Core DLLs
+    for f in glob ('dist/API-MS-Win-*.dll'):
+        os.unlink (f)
+    #then delete some other files belonging to Microsoft
+    other_ms_files = ['KERNELBASE.dll', 'MPR.dll', 'MSWSOCK.dll', 'POWRPROF.dll']
+    for f in other_ms_files:
+        try:
+            os.unlink(os.path.join('dist',f))
+        except:
+            print "unable to delete dist/"+f
+            sys.exit(1)
+
+
+#Should we include applications?
+if copy_apps:
+    copy_folders('applications', 'applications')
+    print "Your application(s) have been added"
+else:
+    #only copy web2py's default applications
+    copy_folders('applications/admin', 'applications/admin')
+    copy_folders('applications/welcome', 'applications/welcome')
+    copy_folders('applications/examples', 'applications/examples')
+    print "Only web2py's admin, examples & welcome applications have been added"
+
+
+#should we copy project's site-packages into dist/site-packages
+if copy_site_packages:
+    #copy site-packages
+    copy_folders('site-packages', 'site-packages')
+else:
+    #no worries, web2py will create the (empty) folder first run
+    print "Skipping site-packages"
+    pass
+
+#should we copy project's scripts into dist/scripts
+if copy_scripts:
+    #copy scripts
+    copy_folders('scripts', 'scripts')
+else:
+    #no worries, web2py will create the (empty) folder first run
+    print "Skipping scripts"
+    pass
+
+
+
+#borrowed from http://bytes.com/topic/python/answers/851018-how-zip-directory-python-using-zipfile
+def recursive_zip(zipf, directory, folder = ""):
+   for item in os.listdir(directory):
+      if os.path.isfile(os.path.join(directory, item)):
+         zipf.write(os.path.join(directory, item), folder + os.sep + item)
+      elif os.path.isdir(os.path.join(directory, item)):
+         recursive_zip(zipf, os.path.join(directory, item), folder + os.sep + item)
+
+#should we create a zip file of the build?
+
+if make_zip:
+    #to keep consistent with how official web2py windows zip file is setup,
+    #create a web2py folder & copy dist's files into it
+    shutil.copytree('dist','zip_temp/web2py')
+    #create zip file
+    #use filename specified via command line
+    zipf = zipfile.ZipFile(zip_filename+".zip", "w", compression=zipfile.ZIP_DEFLATED )
+    path = 'zip_temp' #just temp so the web2py directory is included in our zip file
+    recursive_zip(zipf, path) #leave the first folder as None, as path is root.
+    zipf.close()
+    shutil.rmtree('zip_temp')
+    print "Your Windows binary version of web2py can be found in "+zip_filename+".zip"
+    print "You may extract the archive anywhere and then run web2py/web2py.exe"
+
+#should py2exe build files be removed?
+if remove_build_files:
+    shutil.rmtree('build')
+    shutil.rmtree('deposit')
+    shutil.rmtree('dist')
+    print "py2exe build files removed"
+
+#final info
+if not make_zip and not remove_build_files:
+    print "Your Windows binary & associated files can also be found in /dist"
+
+print "Finished!"
+print "Enjoy web2py " +web2py_version_line

ADDED   setup_exe_2.6.py
Index: setup_exe_2.6.py
==================================================================
--- /dev/null
+++ setup_exe_2.6.py
@@ -0,0 +1,166 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+Usage:
+    Install py2exe: http://sourceforge.net/projects/py2exe/files/
+    Copy script to the web2py directory
+    c:\bin\python26\python build_windows_exe.py py2exe
+    
+Adapted from http://bazaar.launchpad.net/~flavour/sahana-eden/trunk/view/head:/static/scripts/tools/standalone_exe.py
+"""
+
+from distutils.core import setup
+import py2exe
+from gluon.import_all import base_modules, contributed_modules
+from glob import glob
+import fnmatch
+import os
+import shutil
+import sys
+import re
+import zipfile
+
+# Python base version
+python_version = sys.version[:3]
+
+# List of modules deprecated in python2.6 that are in the above set
+py26_deprecated = ['mhlib', 'multifile', 'mimify', 'sets', 'MimeWriter']
+
+if python_version == '2.6':
+    base_modules += ['json', 'multiprocessing']
+    base_modules = list(set(base_modules).difference(set(py26_deprecated)))
+
+
+#I don't know if this is even necessary
+if python_version == '2.6':
+    # Python26 compatibility: http://www.py2exe.org/index.cgi/Tutorial#Step52
+    try:
+        shutil.copytree('C:\Bin\Microsoft.VC90.CRT', 'dist/')
+    except:
+        print "You MUST copy Microsoft.VC90.CRT folder into the dist directory"
+        
+#read web2py version from VERSION file
+web2py_version_line = readlines_file('VERSION')[0]
+#use regular expression to get just the version number
+v_re = re.compile('[0-9]+\.[0-9]+\.[0-9]+')
+web2py_version = v_re.search(web2py_version_line).group(0)
+
+setup(
+  console=['web2py.py'],
+  windows=[{'script':'web2py.py',
+    'dest_base':'web2py_no_console' # MUST NOT be just 'web2py' otherwise it overrides the standard web2py.exe
+    }],
+  name="web2py",
+  version=web2py_version,
+  description="web2py web framework",
+  author="Massimo DiPierro",
+  license = "LGPL v3",
+  data_files=[
+        'ABOUT',
+        'LICENSE',
+        'VERSION',
+        'splashlogo.gif',
+        'logging.example.conf',
+        'options_std.py',
+        'app.example.yaml',
+        'queue.example.yaml'
+        ],
+  options={'py2exe': {
+    'packages': contributed_modules,
+    'includes': base_modules,
+    }},
+  )
+
+print "web2py binary successfully built"
+
+#offer to remove Windows OS dlls user is unlikely to be able to distribute
+print "The process of building a windows executable often includes copying files that belong to Windows."
+delete_ms_files = raw_input("Delete API-MS-Win-* files that are probably unsafe for distribution? (Y/n) ")
+if delete_ms_files.lower().startswith("y"):
+    print "Deleted Microsoft files not licensed for open source distribution"
+    print "You are still responsible for making sure you have the rights to distribute any other included files!"
+    #delete the API-MS-Win-Core DLLs
+    for f in glob ('dist/API-MS-Win-*.dll'):
+        os.unlink (f)
+    #then delete some other files belonging to Microsoft    
+    other_ms_files = ['KERNELBASE.dll', 'MPR.dll', 'MSWSOCK.dll', 'POWRPROF.dll']
+    for f in other_ms_files:
+        try:
+            os.unlink(os.path.join('dist',f))
+        except:
+            print "unable to delete dist/"+f
+            sys.exit(1)
+
+#Offer to include applications
+copy_apps = raw_input("Include your web2py application(s)? (Y/n) ")
+if os.path.exists('dist/applications'):
+    shutil.rmtree('dist/applications')
+if copy_apps.lower().startswith("y"):
+    shutil.copytree('applications', 'dist/applications')
+    print "Your application(s) have been added"
+else:
+    shutil.copytree('applications/admin', 'dist/applications/admin')
+    shutil.copytree('applications/welcome', 'dist/applications/welcome')
+    shutil.copytree('applications/examples', 'dist/applications/examples')
+    print "Only web2py's admin/welcome/examples applications have been added"
+print ""
+
+#Offer to copy project's site-packages into dist/site-packages
+copy_apps = raw_input("Include your web2py site-packages & scripts folders? (Y/n) ")
+if copy_apps.lower().startswith("y"):
+    #copy site-packages
+    if os.path.exists('dist/site-packages')
+        shutil.rmtree('dist/site-packages')
+    shutil.copytree('site-packages', 'dist/site-packages')
+    #copy scripts 
+    if os.path.exists('dist/scripts'):
+        shutil.rmtree('dist/scripts')
+    shutil.copytree('scripts', 'dist/scripts')
+else:
+    #no worries, web2py will create the (empty) folder first run
+    print "Skipping site-packages & scripts"
+    pass
+    
+
+print ""
+
+#borrowed from http://bytes.com/topic/python/answers/851018-how-zip-directory-python-using-zipfile
+def recursive_zip(zipf, directory, folder = ""):
+   for item in os.listdir(directory):
+      if os.path.isfile(os.path.join(directory, item)):
+         zipf.write(os.path.join(directory, item), folder + os.sep + item)
+      elif os.path.isdir(os.path.join(directory, item)):
+         recursive_zip(zipf, os.path.join(directory, item), folder + os.sep + item)
+
+create_zip = raw_input("Create a zip file of web2py for Windows (Y/n)? ")
+if create_zip.lower().startswith("y"):
+    #to keep consistent with how official web2py windows zip file is setup,
+    #create a web2py folder & copy dist's files into it
+    shutil.copytree('dist','zip_temp/web2py')
+    #create zip file
+    zipf = zipfile.ZipFile("web2py_win.zip", "w", compression=zipfile.ZIP_DEFLATED )
+    path = 'zip_temp' #just temp so the web2py directory is included in our zip file
+    recursive_zip(zipf, path) #leave the first folder as None, as path is root.
+    zipf.close()
+    shutil.rmtree('zip_temp')
+    print "Your Windows binary version of web2py can be found in web2py_win.zip"
+    print "You may extract the archive anywhere and then run web2py/web2py.exe"
+    
+    # offer to clear up
+    print "Since you created a zip file you likely do not need the build, deposit and dist folders used while building binary."
+    clean_up_files = raw_input("Delete these un-necessary folders/files? (Y/n) ")
+    if clean_up_files.lower().startswith("y"):
+        shutil.rmtree('build')
+        shutil.rmtree('deposit')
+        shutil.rmtree('dist')
+    else:
+        print "Your Windows binary & associated files can also be found in /dist"
+else:
+    #Didn't want zip file created
+    print ""
+    print "Creation of web2py Windows binary completed."
+    print "You should copy the /dist directory and its contents." 
+    print "To run use web2py.exe"
+print "Finished!"
+print "Enjoy web2py " +web2py_version_line

ADDED   site-packages/__init__.py
Index: site-packages/__init__.py
==================================================================
--- /dev/null
+++ site-packages/__init__.py
@@ -0,0 +1,1 @@
+

ADDED   splashlogo.gif
Index: splashlogo.gif
==================================================================
--- /dev/null
+++ splashlogo.gif
cannot compute difference between binary files

ADDED   web2py.py
Index: web2py.py
==================================================================
--- /dev/null
+++ web2py.py
@@ -0,0 +1,19 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+import os
+import sys
+
+if '__file__' in globals():
+    path = os.path.dirname(os.path.abspath(__file__))
+    os.chdir(path)
+else:
+    path = os.getcwd() # Seems necessary for py2exe
+
+sys.path = [path]+[p for p in sys.path if not p==path]
+
+# import gluon.import_all ##### This should be uncommented for py2exe.py
+import gluon.widget
+
+# Start Web2py and Web2py cron service!
+gluon.widget.start(cron=True)

ADDED   web2py_src.zip
Index: web2py_src.zip
==================================================================
--- /dev/null
+++ web2py_src.zip
cannot compute difference between binary files

ADDED   wsgihandler.py
Index: wsgihandler.py
==================================================================
--- /dev/null
+++ wsgihandler.py
@@ -0,0 +1,44 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+"""
+This file is part of the web2py Web Framework
+Copyrighted by Massimo Di Pierro 
+License: LGPLv3 (http://www.gnu.org/licenses/lgpl.html)
+
+
+This is a WSGI handler for Apache
+Requires apache+mod_wsgi.
+
+In httpd.conf put something like:
+
+    LoadModule wsgi_module modules/mod_wsgi.so
+    WSGIScriptAlias / /path/to/wsgihandler.py
+
+"""
+
+# change these parameters as required
+LOGGING = False
+SOFTCRON = False
+
+import sys
+import os
+
+path = os.path.dirname(os.path.abspath(__file__))
+os.chdir(path)
+sys.path = [path]+[p for p in sys.path if not p==path]
+
+sys.stdout=sys.stderr
+
+import gluon.main
+
+if LOGGING:
+    application = gluon.main.appfactory(wsgiapp=gluon.main.wsgibase,
+                                        logfilename='httpserver.log',
+                                        profilerfilename=None)
+else:
+    application = gluon.main.wsgibase
+
+if SOFTCRON:
+    from gluon.settings import global_settings
+    global_settings.web2py_crontype = 'soft'


    <>