Fossil

**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.7.3"
#define SQLITE_VERSION_NUMBER 3007003
#define SQLITE_SOURCE_ID      "2010-10-07 13:29:13 e55ada89246d4cc5f476891c70572dc7c1c3643e"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version, sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros

  assert( pNew->pInode==NULL );

  /* Parameter isDelete is only used on vxworks. Express this explicitly 
  ** here to prevent compiler warnings about unused parameters.
  */
  UNUSED_PARAMETER(isDelete);

  /* Usually the path zFilename should not be a relative pathname. The
  ** exception is when opening the proxy "conch" file in builds that
  ** include the special Apple locking styles.
  */
#if defined(__APPLE__) && SQLITE_ENABLE_LOCKING_STYLE
  assert( zFilename==0 || zFilename[0]=='/' 
    || pVfs->pAppData==(void*)&autolockIoFinder );
#else
  assert( zFilename==0 || zFilename[0]=='/' );
#endif

  OSTRACE(("OPEN    %-3d %s\n", h, zFilename));
  pNew->h = h;
  pNew->dirfd = dirfd;
  pNew->fileFlags = 0;

  pNew->zPath = zFilename;

#if OS_VXWORKS
  pNew->pId = vxworksFindFileId(zFilename);
  if( pNew->pId==0 ){
    noLock = 1;
    rc = SQLITE_NOMEM;

  if( NEVER(pPager->errCode) )  return pPager->errCode;

  /* Higher-level routines never call this function if database is not
  ** writable.  But check anyway, just for robustness. */
  if( NEVER(pPager->readOnly) ) return SQLITE_PERM;

  CHECK_PAGE(pPg);

  /* The journal file needs to be opened. Higher level routines have already
  ** obtained the necessary locks to begin the write-transaction, but the
  ** rollback journal might not yet be open. Open it now if this is the case.
  **
  ** This is done before calling sqlite3PcacheMakeDirty() on the page. 
  ** Otherwise, if it were done after calling sqlite3PcacheMakeDirty(), then
  ** an error might occur and the pager would end up in WRITER_LOCKED state
  ** with pages marked as dirty in the cache.
  */
  if( pPager->eState==PAGER_WRITER_LOCKED ){
    rc = pager_open_journal(pPager);
    if( rc!=SQLITE_OK ) return rc;
  }
  assert( pPager->eState>=PAGER_WRITER_CACHEMOD );
  assert( assert_pager_state(pPager) );

  /* Mark the page as dirty.  If the page has already been written
  ** to the journal then we can return right away.
  */
  sqlite3PcacheMakeDirty(pPg);
  if( pageInJournal(pPg) && !subjRequiresPage(pPg) ){
    assert( !pagerUseWal(pPager) );

  }else{















  
    /* The transaction journal now exists and we have a RESERVED or an
    ** EXCLUSIVE lock on the main database file.  Write the current page to
    ** the transaction journal if it is not there already.
    */
    if( !pageInJournal(pPg) && !pagerUseWal(pPager) ){
      assert( pagerUseWal(pPager)==0 );

** to the current log file, it is possible to overwrite the start of the
** existing log file with the new frames (i.e. "reset" the log). If so,
** it sets pWal->hdr.mxFrame to 0. Otherwise, pWal->hdr.mxFrame is left
** unchanged.
**
** SQLITE_OK is returned if no error is encountered (regardless of whether
** or not pWal->hdr.mxFrame is modified). An SQLite error code is returned
** if an error occurs.
*/
static int walRestartLog(Wal *pWal){
  int rc = SQLITE_OK;
  int cnt;

  if( pWal->readLock==0 ){
    volatile WalCkptInfo *pInfo = walCkptInfo(pWal);

        sqlite3Put4byte((u8*)&aSalt[0], 1 + sqlite3Get4byte((u8*)&aSalt[0]));
        sqlite3_randomness(4, &aSalt[1]);
        walIndexWriteHdr(pWal);
        pInfo->nBackfill = 0;
        for(i=1; i<WAL_NREADER; i++) pInfo->aReadMark[i] = READMARK_NOT_USED;
        assert( pInfo->aReadMark[0]==0 );
        walUnlockExclusive(pWal, WAL_READ_LOCK(1), WAL_NREADER-1);
      }else if( rc!=SQLITE_BUSY ){
        return rc;
      }
    }
    walUnlockShared(pWal, WAL_READ_LOCK(0));
    pWal->readLock = -1;
    cnt = 0;
    do{
      int notUsed;

  if( pMem->flags & MEM_Real ){
    return pMem->r;
  }else if( pMem->flags & MEM_Int ){
    return (double)pMem->u.i;
  }else if( pMem->flags & (MEM_Str|MEM_Blob) ){
    /* (double)0 In case of SQLITE_OMIT_FLOATING_POINT... */
    double val = (double)0;







    sqlite3AtoF(pMem->z, &val, pMem->n, pMem->enc);
    return val;
  }else{
    /* (double)0 In case of SQLITE_OMIT_FLOATING_POINT... */
    return (double)0;
  }
}

    addr1 = sqlite3VdbeAddOp1(v, OP_IfZero, iLimit);
    sqlite3VdbeAddOp2(v, OP_AddImm, iLimit, -1);
    addr2 = sqlite3VdbeAddOp0(v, OP_Goto);
    sqlite3VdbeJumpHere(v, addr1);
    sqlite3VdbeAddOp1(v, OP_Last, pOrderBy->iECursor);
    sqlite3VdbeAddOp1(v, OP_Delete, pOrderBy->iECursor);
    sqlite3VdbeJumpHere(v, addr2);

  }
}

/*
** Add code to implement the OFFSET
*/
static void codeOffset(

    default: {
      assert( eDest==SRT_Discard );
      break;
    }
#endif
  }

  /* Jump to the end of the loop if the LIMIT is reached.  Except, if
  ** there is a sorter, in which case the sorter has already limited
  ** the output for us.
  */
  if( pOrderBy==0 && p->iLimit ){


    sqlite3VdbeAddOp3(v, OP_IfZero, p->iLimit, iBreak, -1);
  }
}

/*
** Given an expression list, generate a KeyInfo structure that records
** the collating sequence for each expression in that expression list.

      }
      break;
    }
  }
  sqlite3ReleaseTempReg(pParse, regRow);
  sqlite3ReleaseTempReg(pParse, regRowid);





  /* The bottom of the loop
  */
  sqlite3VdbeResolveLabel(v, addrContinue);
  sqlite3VdbeAddOp2(v, OP_Next, iTab, addr);
  sqlite3VdbeResolveLabel(v, addrBreak);
  if( eDest==SRT_Output || eDest==SRT_Coroutine ){
    sqlite3VdbeAddOp2(v, OP_Close, pseudoTab, 0);

      }
    }
  }
 
  /* Separate the left and the right query from one another
  */
  p->pPrior = 0;

  sqlite3ResolveOrderGroupBy(pParse, p, p->pOrderBy, "ORDER");
  if( pPrior->pPrior==0 ){
    sqlite3ResolveOrderGroupBy(pParse, pPrior, pPrior->pOrderBy, "ORDER");
  }

  /* Compute the limit registers */
  computeLimitRegisters(pParse, p, labelEnd);

**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.7.3"
#define SQLITE_VERSION_NUMBER 3007003
#define SQLITE_SOURCE_ID      "2010-10-07 13:29:13 e55ada89246d4cc5f476891c70572dc7c1c3643e"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version, sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros