| ︙ | | |
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
|
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
|
-
-
+
+
|
'speed_down': 0x0C,
'change_color_mode': 0x0D,
'zone_set_brightness': 0x0E,
'zone_set_color': 0x0F
}
},
'cct': {
'retries': 10,
'delay': 0.2,
'retries': 3,
'delay': 0.11,
'channels': [4, 39, 74],
'syncword': [0x55AA, 0x050A],
'brightness_range': [0, 9],
'temperature_output_range': [0, 9],
'temperature_input_range': [6500, 3000],
'zones': [1, 2, 3, 4],
'features': [
|
| ︙ | | |
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
|
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
|
-
+
+
|
'brightness_up': 0x0C,
'brightness_down': 0x04,
'temperature_up': 0x0E,
'temperature_down': 0x0F
}
},
'lyh_cct': {
'retries': 50,
'retries': 70,
'delay': 0.2,
'channels': [24],
'syncword': [0x6F67, 0xA118],
'message_length': 13,
'format_config': {
'crc_enabled': 0,
'packet_length_encoded': 0,
'auto_ack': 1,
'auto_term_tx': 0
},
'brightness_range': [0, 9],
'temperature_output_range': [0, 9],
'temperature_input_range': [6500, 3000],
'zones': [1, 2, 3],
'features': [
|
| ︙ | | |
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
|
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
|
-
+
+
-
+
|
'zone': zone
}
message['brightness'] = brightness
return self._send_button(message)
def _step_value(self, target_value, target_range_min, target_range_max, button_prefix, zone):
def _step_value(self, target_value, target_range_min, target_range_max, button_prefix, zone, midpoint = None):
# Step all the way to the nearest extreme before moving it to
# where it should be
target_range = target_range_max - target_range_min + 1
if midpoint is None:
midpoint = (target_range / 2) + target_range_min
midpoint = (target_range / 2) + target_range_min
# Move to the "initial" value where we force the value
# to the extreme, then move it to its final value
initial_steps = target_range
if target_value < midpoint:
initial_direction = 'down'
final_direction = 'up'
|
| ︙ | | |
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
|
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
|
+
+
+
+
+
+
-
+
|
for step in range(final_steps):
self._debug("[FINAL] Stepping {} {}".format(button_prefix, final_direction))
self._send_button(step_command)
return True
def _step_brightness(self, brightness, brightness_min, brightness_max, zone = None):
# For setting the brightness, set a change-overpoint at around
# 75%, where below this value we will go to the dimmest and
# step up and above this point it will go to the brightest
# and step down. This is to avoid getting bright then dimming
# which is much more jarring than getting dim and brightening.
brightness_changeover = ((brightness_max - brightness_min) * 0.75) + brightness_min;
return self._step_value(brightness, brightness_min, brightness_max, 'brightness', zone)
return self._step_value(brightness, brightness_min, brightness_max, 'brightness', zone, midpoint = brightness_changeover)
def _step_temperature(self, temperature, temperature_min, temperature_max, zone = None):
return self._step_value(temperature, temperature_min, temperature_max, 'temperature', zone)
def _max_brightness(self, zone = None):
if zone is None:
message = {'button': 'max'}
|
| ︙ | | |