/*
** Copyright (c) 2009 D. Richard Hipp
**
** This program is free software; you can redistribute it and/or
** modify it under the terms of the Simplified BSD License (also
** known as the "2-Clause License" or "FreeBSD License".)
**
** This program is distributed in the hope that it will be useful,
** but without any warranty; without even the implied warranty of
** merchantability or fitness for a particular purpose.
**
** Author contact information:
**   drh@hwaci.com
**   http://www.hwaci.com/drh/
**
*******************************************************************************
**
** This file manages low-level SSL communications.
**
** This file implements a singleton.  A single SSL connection may be active
** at a time.  State information is stored in static variables.
**
** The SSL connections can be either a client or a server.  But all
** connections for a single process must be of the same type, either client
** or server.
**
** SSL support is abstracted out into this module because Fossil can
** be compiled without SSL support (which requires OpenSSL library)
*/

#include "config.h"
#include "http_ssl.h"

#ifdef FOSSIL_ENABLE_SSL

#include <openssl/bio.h>
#include <openssl/ssl.h>
#include <openssl/err.h>
#include <openssl/x509.h>

#include <assert.h>
#include <sys/types.h>

/*
** There can only be a single OpenSSL IO connection open at a time.
** State information about that IO is stored in the following
** local variables:
*/
static int sslIsInit = 0;    /* 0: uninit 1: init as client 2: init as server */
static BIO *iBio = 0;        /* OpenSSL I/O abstraction */
static char *sslErrMsg = 0;  /* Text of most recent OpenSSL error */
static SSL_CTX *sslCtx;      /* SSL context */
static SSL *ssl;
static struct {              /* Accept this SSL cert for this session only */
  char *zHost;                  /* Subject or host name */
  char *zHash;                  /* SHA2-256 hash of the cert */
} sException;
static int sslNoCertVerify = 0;  /* Do not verify SSL certs */


/* This is a self-signed cert in the PEM format that can be used when
** no other certs are available.
*/
static const char sslSelfCert[] = 
"-----BEGIN CERTIFICATE-----\n"
"MIIDMTCCAhkCFGrDmuJkkzWERP/ITBvzwwI2lv0TMA0GCSqGSIb3DQEBCwUAMFQx\n"
"CzAJBgNVBAYTAlVTMQswCQYDVQQIDAJOQzESMBAGA1UEBwwJQ2hhcmxvdHRlMRMw\n"
"EQYDVQQKDApGb3NzaWwtU0NNMQ8wDQYDVQQDDAZGb3NzaWwwIBcNMjExMjI3MTEz\n"
"MTU2WhgPMjEyMTEyMjcxMTMxNTZaMFQxCzAJBgNVBAYTAlVTMQswCQYDVQQIDAJO\n"
"QzESMBAGA1UEBwwJQ2hhcmxvdHRlMRMwEQYDVQQKDApGb3NzaWwtU0NNMQ8wDQYD\n"
"VQQDDAZGb3NzaWwwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQCCbTU2\n"
"6GRQHQqLq7vyZ0OxpAxmgfAKCxt6eIz+jBi2ZM/CB5vVXWVh2+SkSiWEA3UZiUqX\n"
"xZlzmS/CglZdiwLLDJML8B4OiV72oivFH/vJ7+cbvh1dTxnYiHuww7GfQngPrLfe\n"
"fiIYPDk1GTUJHBQ7Ue477F7F8vKuHdVgwktF/JDM6M60aSqlo2D/oysirrb+dlur\n"
"Tlv0rjsYOfq6bLAajoL3qi/vek6DNssoywbge4PfbTgS9g7Gcgncbcet5pvaS12J\n"
"avhFcd4JU4Ity49Hl9S/C2MfZ1tE53xVggRwKz4FPj65M5uymTdcxtjKXtCxIE1k\n"
"KxJxXQh7rIYjm+RTAgMBAAEwDQYJKoZIhvcNAQELBQADggEBAFkdtpqcybAzJN8G\n"
"+ONuUm5sXNbWta7JGvm8l0BTSBcCUtJA3hn16iJqXA9KmLnaF2denC4EYk+KlVU1\n"
"QXxskPJ4jB8A5B05jMijYv0nzCxKhviI8CR7GLEEGKzeg9pbW0+O3vaVehoZtdFX\n"
"z3SsCssr9QjCLiApQxMzW1Iv3od2JXeHBwfVMFrWA1VCEUCRs8OSW/VOqDPJLVEi\n"
"G6wxc4kN9dLK+5S29q3nzl24/qzXoF8P9Re5KBCbrwaHgy+OEEceq5jkmfGFxXjw\n"
"pvVCNry5uAhH5NqbXZampUWqiWtM4eTaIPo7Y2mDA1uWhuWtO6F9PsnFJlQHCnwy\n"
"s/TsrXk=\n"
"-----END CERTIFICATE-----\n";

/* This is the private-key corresponding to the cert above
*/
static const char sslSelfPKey[] = 
"-----BEGIN PRIVATE KEY-----\n"
"MIIEvAIBADANBgkqhkiG9w0BAQEFAASCBKYwggSiAgEAAoIBAQCCbTU26GRQHQqL\n"
"q7vyZ0OxpAxmgfAKCxt6eIz+jBi2ZM/CB5vVXWVh2+SkSiWEA3UZiUqXxZlzmS/C\n"
"glZdiwLLDJML8B4OiV72oivFH/vJ7+cbvh1dTxnYiHuww7GfQngPrLfefiIYPDk1\n"
"GTUJHBQ7Ue477F7F8vKuHdVgwktF/JDM6M60aSqlo2D/oysirrb+dlurTlv0rjsY\n"
"Ofq6bLAajoL3qi/vek6DNssoywbge4PfbTgS9g7Gcgncbcet5pvaS12JavhFcd4J\n"
"U4Ity49Hl9S/C2MfZ1tE53xVggRwKz4FPj65M5uymTdcxtjKXtCxIE1kKxJxXQh7\n"
"rIYjm+RTAgMBAAECggEANfTH1vc8yIe7HRzmm9lsf8jF+II4s2705y2H5qY+cvYx\n"
"nKtZJGOG1X0KkYy7CGoFv5K0cSUl3lS5FVamM/yWIzoIex/Sz2C1EIL2aI5as6ez\n"
"jB6SN0/J+XI8+Vt7186/rHxfdIPpxuzjHbxX3HTpScETNWcLrghbrPxakbTPPxwt\n"
"+x7QlPmmkFNuMfvkzToFf9NdwL++44TeBPOpvD/Lrw+eyqdth9RJPq9cM96plh9V\n"
"HuRqeD8+QNafaXBdSQs3FJK/cDK/vWGKZWIfFVSDbDhwYljkXGijreFjtXQfkkpF\n"
"rl1J87/H9Ee7z8fTD2YXQHl+0/rghAVtac3u54dpQQKBgQC2XG3OEeMrOp9dNkUd\n"
"F8VffUg0ecwG+9L3LCe7U71K0kPmXjV6xNnuYcNQu84kptc5vI8wD23p29LaxdNc\n"
"9m0lcw06/YYBOPkNphcHkINYZTvVJF10mL3isymzMaTtwDkZUkOjL1B+MTiFT/qp\n"
"ARKrTYGJ4HxY7+tUkI5pUmg4PQKBgQC3GA4d1Rz3Pb/RRpcsZgWknKsKhoN36mSn\n"
"xFJ3wPBvVv2B1ltTMzh/+the0ty6clzMrvoLERzRcheDsNrc/j/TUVG8sVdBYJwX\n"
"tMZyFW4NVMOErT/1ukh6jBqIMBo6NJL3EV/AKj0yniksgKOr0/AAduAccnGST8Jd\n"
"SHOdjwvHzwKBgGZBq/zqgNTDuYseHGE07CMgcDWkumiMGv8ozlq3mSR0hUiPOTPP\n"
"YFjQjyIdPXnF6FfiyPPtIvgIoNK2LVAqiod+XUPf152l4dnqcW13dn9BvOxGyPTR\n"
"lWCikFaAFviOWjY9r9m4dU1dslDmySqthFd0TZgPvgps9ivkJ0cdw30NAoGAMC/E\n"
"h1VvKiK2OP27C5ROJ+STn1GHiCfIFd81VQ8SODtMvL8NifgRBp2eFFaqgOdYRQZI\n"
"CGGYlAbS6XXCJCdF5Peh62dA75PdgN+y2pOJQzjrvB9cle9Q4++7i9wdCvSLOTr5\n"
"WDnFoWy+qVexu6crovOmR9ZWzYrwPFy1EOJ010ECgYBl7Q+jmjOSqsVwhFZ0U7LG\n"
"diN+vXhWfn1wfOWd8u79oaqU/Oy7xyKW2p3H5z2KFrBM/vib53Lh4EwFZjcX+jVG\n"
"krAmbL+M/hP7z3TD2UbESAzR/c6l7FU45xN84Lsz5npkR8H/uAHuqLgb9e430Mjx\n"
"YNMwdb8rChHHChNZu6zuxw==\n"
"-----END PRIVATE KEY-----\n";

/*
** Read a PEM certificate from memory and push it into an SSL_CTX.
** Return the number of errors.
*/
static int sslctx_use_cert_from_mem(
  SSL_CTX *ctx,
  const char *pData,
  int nData
){
  BIO *in;
  int rc = 1;
  X509 *x = 0;
  X509 *cert = 0;

  in = BIO_new_mem_buf(pData, nData);
  if( in==0 ) goto end_of_ucfm;
  // x = X509_new_ex(ctx->libctx, ctx->propq);
  x = X509_new();
  if( x==0 ) goto end_of_ucfm;
  cert = PEM_read_bio_X509(in, &x, 0, 0);
  if( cert==0 ) goto end_of_ucfm;
  rc = SSL_CTX_use_certificate(ctx, x)<=0;
end_of_ucfm:
  X509_free(x);
  BIO_free(in);
  return rc;
}

/*
** Read a PEM private key from memory and add it to an SSL_CTX.
** Return the number of errors.
*/
static int sslctx_use_pkey_from_mem(
  SSL_CTX *ctx,
  const char *pData,
  int nData
){
  int rc = 1;
  BIO *in;
  EVP_PKEY *pkey = 0;

  in = BIO_new_mem_buf(pData, nData);
  if( in==0 ) goto end_of_upkfm;
  pkey = PEM_read_bio_PrivateKey(in, 0, 0, 0);
  if( pkey==0 ) goto end_of_upkfm;
  rc = SSL_CTX_use_PrivateKey(ctx, pkey)<=0;
  EVP_PKEY_free(pkey);
end_of_upkfm:
  BIO_free(in);
  return rc;
}

/*
** Clear the SSL error message
*/
static void ssl_clear_errmsg(void){
  free(sslErrMsg);
  sslErrMsg = 0;
}

/*
** Set the SSL error message.
*/
void ssl_set_errmsg(const char *zFormat, ...){
  va_list ap;
  ssl_clear_errmsg();
  va_start(ap, zFormat);
  sslErrMsg = vmprintf(zFormat, ap);
  va_end(ap);
}

/*
** Return the current SSL error message
*/
const char *ssl_errmsg(void){
  return sslErrMsg;
}

/*
** When a server requests a client certificate that hasn't been provided,
** display a warning message explaining what to do next.
*/
static int ssl_client_cert_callback(SSL *ssl, X509 **x509, EVP_PKEY **pkey){
  fossil_warning("The remote server requested a client certificate for "
    "authentication. Specify the pathname to a file containing the PEM "
    "encoded certificate and private key with the --ssl-identity option "
    "or the ssl-identity setting.");
  return 0; /* no cert available */
}

/*
** Convert an OpenSSL ASN1_TIME to an ISO8601 timestamp.
**
** Per RFC 5280, ASN1 timestamps in X.509 certificates must 
** be in UTC (Zulu timezone) with no fractional seconds.
**
** If showUtc==1, add " UTC" at the end of the returned string. This is
** not ISO8601-compliant, but makes the displayed value more user-friendly.
*/
static const char *ssl_asn1time_to_iso8601(ASN1_TIME *asn1_time,
                                           int showUtc){
  assert( showUtc==0 || showUtc==1 );
  if( !ASN1_TIME_check(asn1_time) ){
    return mprintf("Bad time value");
  }else{
    char res[20];
    char *pr = res;
    const char *pt = (char *)asn1_time->data;
    /*                   0123456789 1234
    **  UTCTime:         YYMMDDHHMMSSZ      (YY >= 50 ? 19YY : 20YY)
    **  GeneralizedTime: YYYYMMDDHHMMSSZ */
    if( asn1_time->length < 15 ){
      /* UTCTime, fill out century digits */
      *pr++ = pt[0]>='5' ? '1' : '2';
      *pr++ = pt[0]>='5' ? '9' : '0';
    }else{
      /* GeneralizedTime, copy century digits and advance source */
      *pr++ = pt[0]; *pr++ = pt[1];
      pt += 2;
    }
    *pr++ = pt[0]; *pr++ = pt[1]; *pr++ = '-';
    *pr++ = pt[2]; *pr++ = pt[3]; *pr++ = '-';
    *pr++ = pt[4]; *pr++ = pt[5]; *pr++ = ' ';
    *pr++ = pt[6]; *pr++ = pt[7]; *pr++ = ':';
    *pr++ = pt[8]; *pr++ = pt[9]; *pr++ = ':';
    *pr++ = pt[10]; *pr++ = pt[11]; *pr = '\0';
    return mprintf("%s%s", res, (showUtc ? " UTC" : ""));
  }
}

/*
** Call this routine once before any other use of the SSL interface.
** This routine does initial configuration of the SSL module.
*/
static void ssl_global_init_client(void){
  const char *zCaSetting = 0, *zCaFile = 0, *zCaDirectory = 0;
  const char *identityFile;

  if( sslIsInit==0 ){
    SSL_library_init();
    SSL_load_error_strings();
    OpenSSL_add_all_algorithms();
    sslCtx = SSL_CTX_new(SSLv23_client_method());
    /* Disable SSLv2 and SSLv3 */
    SSL_CTX_set_options(sslCtx, SSL_OP_NO_SSLv2|SSL_OP_NO_SSLv3);

    /* Set up acceptable CA root certificates */
    zCaSetting = db_get("ssl-ca-location", 0);
    if( zCaSetting==0 || zCaSetting[0]=='\0' ){
      /* CA location not specified, use platform's default certificate store */
      X509_STORE_set_default_paths(SSL_CTX_get_cert_store(sslCtx));
    }else{
      /* User has specified a CA location, make sure it exists and use it */
      switch( file_isdir(zCaSetting, ExtFILE) ){
        case 0: { /* doesn't exist */
          fossil_fatal("ssl-ca-location is set to '%s', "
              "but is not a file or directory", zCaSetting);
          break;
        }
        case 1: { /* directory */
          zCaDirectory = zCaSetting;
          break;
        }
        case 2: { /* file */
          zCaFile = zCaSetting;
          break;
        }
      }
      if( SSL_CTX_load_verify_locations(sslCtx, zCaFile, zCaDirectory)==0 ){
        fossil_fatal("Failed to use CA root certificates from "
          "ssl-ca-location '%s'", zCaSetting);
      }
    }

    /* Load client SSL identity, preferring the filename specified on the
    ** command line */
    if( g.zSSLIdentity!=0 ){
      identityFile = g.zSSLIdentity;
    }else{
      identityFile = db_get("ssl-identity", 0);
    }
    if( identityFile!=0 && identityFile[0]!='\0' ){
      if( SSL_CTX_use_certificate_chain_file(sslCtx,identityFile)!=1
       || SSL_CTX_use_PrivateKey_file(sslCtx,identityFile,SSL_FILETYPE_PEM)!=1
      ){
        fossil_fatal("Could not load SSL identity from %s", identityFile);
      }
    }
    /* Register a callback to tell the user what to do when the server asks
    ** for a cert */
    SSL_CTX_set_client_cert_cb(sslCtx, ssl_client_cert_callback);

    sslIsInit = 1;
  }else{
    assert( sslIsInit==1 );
  }
}

/*
** Call this routine to shutdown the SSL module prior to program exit.
*/
void ssl_global_shutdown(void){
  if( sslIsInit ){
    SSL_CTX_free(sslCtx);
    ssl_clear_errmsg();
    sslIsInit = 0;
  }
}

/*
** Close the currently open client SSL connection.  If no connection is open,
** this routine is a no-op.
*/
void ssl_close_client(void){
  if( iBio!=NULL ){
    (void)BIO_reset(iBio);
    BIO_free_all(iBio);
    iBio = NULL;
  }
}

/* See RFC2817 for details */
static int establish_proxy_tunnel(UrlData *pUrlData, BIO *bio){
  int rc, httpVerMin;
  char *bbuf;
  Blob snd, reply;
  int done=0,end=0;
  blob_zero(&snd);
  blob_appendf(&snd, "CONNECT %s:%d HTTP/1.1\r\n", pUrlData->hostname,
      pUrlData->proxyOrigPort);
  blob_appendf(&snd, "Host: %s:%d\r\n",
               pUrlData->hostname, pUrlData->proxyOrigPort);
  if( pUrlData->proxyAuth ){
    blob_appendf(&snd, "Proxy-Authorization: %s\r\n", pUrlData->proxyAuth);
  }
  blob_append(&snd, "Proxy-Connection: keep-alive\r\n", -1);
  blob_appendf(&snd, "User-Agent: %s\r\n", get_user_agent());
  blob_append(&snd, "\r\n", 2);
  BIO_write(bio, blob_buffer(&snd), blob_size(&snd));
  blob_reset(&snd);

  /* Wait for end of reply */
  blob_zero(&reply);
  do{
    int len;
    char buf[256];
    len = BIO_read(bio, buf, sizeof(buf));
    blob_append(&reply, buf, len);

    bbuf = blob_buffer(&reply);
    len = blob_size(&reply);
    while(end < len) {
      if(bbuf[end] == '\r') {
        if(len - end < 4) {
          /* need more data */
          break;
        }
        if(memcmp(&bbuf[end], "\r\n\r\n", 4) == 0) {
          done = 1;
          break;
        }
      }
      end++;
    }
  }while(!done);
  sscanf(bbuf, "HTTP/1.%d %d", &httpVerMin, &rc);
  blob_reset(&reply);
  return rc;
}

/*
** Invoke this routine to disable SSL cert verification.  After
** this call is made, any SSL cert that the server provides will
** be accepted.  Communication will still be encrypted, but the
** client has no way of knowing whether it is talking to the
** real server or a man-in-the-middle imposter.
*/
void ssl_disable_cert_verification(void){
  sslNoCertVerify = 1;  
}

/*
** Open an SSL connection as a client that is to connect to the server
** identified by pUrlData.
**
*  The identify of the server is determined as follows:
**
**    pUrlData->name  Name of the server.  Ex: fossil-scm.org
**    g.url.name      Name of the proxy server, if proxying.
**    pUrlData->port  TCP/IP port to use.  Ex: 80
**
** Return the number of errors.
*/
int ssl_open_client(UrlData *pUrlData){
  X509 *cert;
  const char *zRemoteHost;

  ssl_global_init_client();
  if( pUrlData->useProxy ){
    int rc;
    char *connStr = mprintf("%s:%d", g.url.name, pUrlData->port);
    BIO *sBio = BIO_new_connect(connStr);
    free(connStr);
    if( BIO_do_connect(sBio)<=0 ){
      ssl_set_errmsg("SSL: cannot connect to proxy %s:%d (%s)",
            pUrlData->name, pUrlData->port,
            ERR_reason_error_string(ERR_get_error()));
      ssl_close_client();
      return 1;
    }
    rc = establish_proxy_tunnel(pUrlData, sBio);
    if( rc<200||rc>299 ){
      ssl_set_errmsg("SSL: proxy connect failed with HTTP status code %d", rc);
      return 1;
    }

    pUrlData->path = pUrlData->proxyUrlPath;

    iBio = BIO_new_ssl(sslCtx, 1);
    BIO_push(iBio, sBio);
    zRemoteHost = pUrlData->hostname;
  }else{
    iBio = BIO_new_ssl_connect(sslCtx);
    zRemoteHost = pUrlData->name;
  }
  if( iBio==NULL ) {
    ssl_set_errmsg("SSL: cannot open SSL (%s)",
                    ERR_reason_error_string(ERR_get_error()));
    return 1;
  }
  BIO_get_ssl(iBio, &ssl);

#if (SSLEAY_VERSION_NUMBER >= 0x00908070) && !defined(OPENSSL_NO_TLSEXT)
  if( !SSL_set_tlsext_host_name(ssl, zRemoteHost)){
    fossil_warning("WARNING: failed to set server name indication (SNI), "
                  "continuing without it.\n");
  }
#endif

  SSL_set_mode(ssl, SSL_MODE_AUTO_RETRY);
#if OPENSSL_VERSION_NUMBER >= 0x010002000
  if( !sslNoCertVerify ){
    X509_VERIFY_PARAM *param = 0;
    param = SSL_get0_param(ssl);
    if( !X509_VERIFY_PARAM_set1_host(param, zRemoteHost, strlen(zRemoteHost)) ){
      fossil_fatal("failed to set hostname.");
    }
    /* SSL_set_verify(ssl, SSL_VERIFY_PEER, 0); */
  }
#endif

  if( !pUrlData->useProxy ){
    char *connStr = mprintf("%s:%d", pUrlData->name, pUrlData->port);
    BIO_set_conn_hostname(iBio, connStr);
    free(connStr);
    if( BIO_do_connect(iBio)<=0 ){
      ssl_set_errmsg("SSL: cannot connect to host %s:%d (%s)",
         pUrlData->name, pUrlData->port,
         ERR_reason_error_string(ERR_get_error()));
      ssl_close_client();
      return 1;
    }
  }

  if( BIO_do_handshake(iBio)<=0 ) {
    ssl_set_errmsg("Error establishing SSL connection %s:%d (%s)",
        pUrlData->useProxy?pUrlData->hostname:pUrlData->name,
        pUrlData->useProxy?pUrlData->proxyOrigPort:pUrlData->port,
        ERR_reason_error_string(ERR_get_error()));
    ssl_close_client();
    return 1;
  }
  /* Check if certificate is valid */
  cert = SSL_get_peer_certificate(ssl);

  if ( cert==NULL ){
    ssl_set_errmsg("No SSL certificate was presented by the peer");
    ssl_close_client();
    return 1;
  }

  /* Debugging hint:   On unix-like system, run something like:
  **
  **     SSL_CERT_DIR=/tmp  ./fossil sync
  **
  ** to cause certificate validation to fail, and thus test the fallback
  ** logic.
  */
  if( !sslNoCertVerify && SSL_get_verify_result(ssl)!=X509_V_OK ){
    int x, desclen;
    char *desc, *prompt;
    Blob ans;
    char cReply;
    BIO *mem;
    unsigned char md[EVP_MAX_MD_SIZE];
    char zHash[EVP_MAX_MD_SIZE*2+1];
    unsigned int mdLength = (int)sizeof(md);

    memset(md, 0, sizeof(md));
    zHash[0] = 0;
                            /*  MMNNFFPPS */
#if OPENSSL_VERSION_NUMBER >= 0x010000000
    x = X509_digest(cert, EVP_sha256(), md, &mdLength);
#else
    x = X509_digest(cert, EVP_sha1(), md, &mdLength);
#endif
    if( x ){
      int j;
      for(j=0; j<mdLength && j*2+1<sizeof(zHash); ++j){
        zHash[j*2] = "0123456789abcdef"[md[j]>>4];
        zHash[j*2+1] = "0123456789abcdef"[md[j]&0xf];
      }
      zHash[j*2] = 0;
    }

    if( ssl_certificate_exception_exists(pUrlData, zHash) ){
      /* Ignore the failure because an exception exists */
      ssl_one_time_exception(pUrlData, zHash);
    }else{
      /* Tell the user about the failure and ask what to do */
      mem = BIO_new(BIO_s_mem());
      BIO_puts(mem,     "  subject:   ");
      X509_NAME_print_ex(mem, X509_get_subject_name(cert), 0, XN_FLAG_ONELINE);
      BIO_puts(mem,   "\n  issuer:    ");
      X509_NAME_print_ex(mem, X509_get_issuer_name(cert), 0, XN_FLAG_ONELINE);
      BIO_printf(mem, "\n  notBefore: %s",
                 ssl_asn1time_to_iso8601(X509_get_notBefore(cert), 1));
      BIO_printf(mem, "\n  notAfter:  %s",
                 ssl_asn1time_to_iso8601(X509_get_notAfter(cert), 1));
      BIO_printf(mem, "\n  sha256:    %s", zHash);
      desclen = BIO_get_mem_data(mem, &desc);
  
      prompt = mprintf("Unable to verify SSL cert from %s\n%.*s\n"
          "accept this cert and continue (y/N/fingerprint)? ",
          pUrlData->name, desclen, desc);
      BIO_free(mem);
  
      prompt_user(prompt, &ans);
      free(prompt);
      cReply = blob_str(&ans)[0];
      if( cReply!='y' && cReply!='Y'
       && fossil_stricmp(blob_str(&ans),zHash)!=0
      ){
        X509_free(cert);
        ssl_set_errmsg("SSL cert declined");
        ssl_close_client();
        blob_reset(&ans);
        return 1;
      }
      blob_reset(&ans);
      ssl_one_time_exception(pUrlData, zHash);
      prompt_user("remember this exception (y/N)? ", &ans);
      cReply = blob_str(&ans)[0];
      if( cReply=='y' || cReply=='Y') {
        db_open_config(0,0);
        ssl_remember_certificate_exception(pUrlData, zHash);
      }
      blob_reset(&ans);
    }
  }

  /* Set the Global.zIpAddr variable to the server we are talking to.
  ** This is used to populate the ipaddr column of the rcvfrom table,
  ** if any files are received from the server.
  */
  {
  /* As soon as libressl implements
  ** BIO_ADDR_hostname_string/BIO_get_conn_address.
  ** check here for the correct LIBRESSL_VERSION_NUMBER too. For now: disable
  */
#if defined(OPENSSL_VERSION_NUMBER) && OPENSSL_VERSION_NUMBER >= 0x10100000L \
      && !defined(LIBRESSL_VERSION_NUMBER)
    char *ip = BIO_ADDR_hostname_string(BIO_get_conn_address(iBio),1);
    g.zIpAddr = mprintf("%s", ip);
    OPENSSL_free(ip);
#else
    /* IPv4 only code */
    const unsigned char *ip;
    ip = (const unsigned char*)BIO_ptr_ctrl(iBio,BIO_C_GET_CONNECT,2);
    g.zIpAddr = mprintf("%d.%d.%d.%d", ip[0], ip[1], ip[2], ip[3]);
#endif
  }

  X509_free(cert);
  return 0;
}

/*
** Remember that the cert with the given hash is a acceptable for
** use with pUrlData->name.
*/
LOCAL void ssl_remember_certificate_exception(
  UrlData *pUrlData,
  const char *zHash
){
  db_set_mprintf(zHash, 1, "cert:%s", pUrlData->name);
}

/*
** Return true if the there exists a certificate exception for
** pUrlData->name that matches the hash.
*/
LOCAL int ssl_certificate_exception_exists(
  UrlData *pUrlData,
  const char *zHash
){
  char *zName, *zValue;
  if( fossil_strcmp(sException.zHost,pUrlData->name)==0
   && fossil_strcmp(sException.zHash,zHash)==0
  ){
    return 1;
  }
  zName = mprintf("cert:%s", pUrlData->name);
  zValue = db_get(zName,0);
  fossil_free(zName);
  return zValue!=0 && strcmp(zHash,zValue)==0;
}

/*
** Remember zHash as an acceptable certificate for this session only.
*/
LOCAL void ssl_one_time_exception(
  UrlData *pUrlData,
  const char *zHash
){
  fossil_free(sException.zHost);
  sException.zHost = fossil_strdup(pUrlData->name);
  fossil_free(sException.zHash);
  sException.zHash = fossil_strdup(zHash);
}

/*
** Send content out over the SSL connection from the client to
** the server.
*/
size_t ssl_send(void *NotUsed, void *pContent, size_t N){
  size_t total = 0;
  while( N>0 ){
    int sent = BIO_write(iBio, pContent, N);
    if( sent<=0 ){
      if( BIO_should_retry(iBio) ){
        continue;
      }
      break;
    }
    total += sent;
    N -= sent;
    pContent = (void*)&((char*)pContent)[sent];
  }
  return total;
}

/*
** Receive content back from the client SSL connection.  In other
** words read the reply back from the server.
*/
size_t ssl_receive(void *NotUsed, void *pContent, size_t N){
  size_t total = 0;
  while( N>0 ){
    int got = BIO_read(iBio, pContent, N);
    if( got<=0 ){
      if( BIO_should_retry(iBio) ){
        continue;
      }
      break;
    }
    total += got;
    N -= got;
    pContent = (void*)&((char*)pContent)[got];
  }
  return total;
}

/*
** Initialize the SSL library so that it is able to handle
** server-side connections.  Invoke fossil_fatal() if there are
** any problems.
**
** If zKeyFile and zCertFile are not NULL, then they are the names
** of disk files that hold the certificate and private-key for the
** server.  If zCertFile is not NULL but zKeyFile is NULL, then
** zCertFile is assumed to be a concatenation of the certificate and
** the private-key in the PEM format.
**
** If zCertFile is NULL, then "ssl-cert" setting is consulted
** to get the certificate and private-key (concatenated together, in
** the PEM format).  If there is no ssl-cert setting, then
** a built-in self-signed cert is used.
*/
void ssl_init_server(const char *zCertFile, const char *zKeyFile){
  if( sslIsInit==0 ){
    const char *zTlsCert;
    SSL_library_init();
    SSL_load_error_strings();
    OpenSSL_add_all_algorithms();
    sslCtx = SSL_CTX_new(SSLv23_server_method());
    if( sslCtx==0 ){
      ERR_print_errors_fp(stderr);
      fossil_fatal("Error initializing the SSL server");
    }
    if( zCertFile && zCertFile[0] ){
      if( SSL_CTX_use_certificate_file(sslCtx,zCertFile,SSL_FILETYPE_PEM)<=0 ){
        ERR_print_errors_fp(stderr);
        fossil_fatal("Error loading CERT file \"%s\"", zCertFile);
      }
      if( zKeyFile==0 ) zKeyFile = zCertFile;
      if( SSL_CTX_use_PrivateKey_file(sslCtx, zKeyFile, SSL_FILETYPE_PEM)<=0 ){
        ERR_print_errors_fp(stderr);
        fossil_fatal("Error loading PRIVATE KEY from file \"%s\"", zKeyFile);
      }
    }else
    if( (zTlsCert = db_get("ssl-cert",0))!=0 ){
      if( sslctx_use_cert_from_mem(sslCtx, zTlsCert, -1)
       || sslctx_use_pkey_from_mem(sslCtx, zTlsCert, -1)
      ){
        fossil_fatal("Error loading the CERT from the"
                     " 'ssl-cert' setting");
      }
    }else if( sslctx_use_cert_from_mem(sslCtx, sslSelfCert, -1)
           || sslctx_use_pkey_from_mem(sslCtx, sslSelfPKey, -1) ){
      fossil_fatal("Error loading self-signed CERT");
    }
    if( !SSL_CTX_check_private_key(sslCtx) ){
      fossil_fatal("PRIVATE KEY \"%s\" does not match CERT \"%s\"",
           zKeyFile, zCertFile);
    }
    SSL_CTX_set_mode(sslCtx, SSL_MODE_AUTO_RETRY);
    sslIsInit = 2;
  }else{
    assert( sslIsInit==2 );
  }
}

typedef struct SslServerConn {
  SSL *ssl;          /* The SSL codec */
  int atEof;         /* True when EOF reached. */
  int iSocket;       /* The socket */
} SslServerConn;

/*
** Create a new server-side codec.  The argument is the socket's file
** descriptor from which the codec reads and writes. The returned
** memory must eventually be passed to ssl_close_server().
*/
void *ssl_new_server(int iSocket){
  SslServerConn *pServer = fossil_malloc_zero(sizeof(*pServer));
  BIO *b = BIO_new_socket(iSocket, 0);
  pServer->ssl = SSL_new(sslCtx);
  pServer->atEof = 0;
  pServer->iSocket = iSocket;
  SSL_set_bio(pServer->ssl, b, b);
  SSL_accept(pServer->ssl);
  return (void*)pServer;
}

/*
** Close a server-side code previously returned from ssl_new_server().
*/
void ssl_close_server(void *pServerArg){
  SslServerConn *pServer = (SslServerConn*)pServerArg;
  SSL_free(pServer->ssl);
  fossil_free(pServer);
}

/*
** Return TRUE if there are no more bytes available to be read from
** the client.
*/
int ssl_eof(void *pServerArg){
  SslServerConn *pServer = (SslServerConn*)pServerArg;
  return pServer->atEof;
}

/*
** Read cleartext bytes that have been received from the client and
** decrypted by the SSL server codec.
*/
size_t ssl_read_server(void *pServerArg, char *zBuf, size_t nBuf){
  int n;
  SslServerConn *pServer = (SslServerConn*)pServerArg;
  if( pServer->atEof ) return 0;
  if( nBuf>0x7fffffff ){ fossil_fatal("SSL read too big"); }
  n = SSL_read(pServer->ssl, zBuf, (int)nBuf);
  if( n==0 ) pServer->atEof = 1;
  return n<=0 ? 0 : n;
}

/*
** Read a single line of text from the client.
*/
char *ssl_gets(void *pServerArg, char *zBuf, int nBuf){
  int n = 0;
  int i;
  SslServerConn *pServer = (SslServerConn*)pServerArg;
  
  if( pServer->atEof ) return 0;
  for(i=0; i<nBuf-1; i++){
    n = SSL_read(pServer->ssl, &zBuf[i], 1);
    if( n<=0 ){
      return 0;
    }
    if( zBuf[i]=='\n' ) break;
  }
  zBuf[i+1] = 0;
  return zBuf;
}


/*
** Write cleartext bytes into the SSL server codec so that they can
** be encrypted and sent back to the client.
*/
size_t ssl_write_server(void *pServerArg, char *zBuf, size_t nBuf){
  int n;
  SslServerConn *pServer = (SslServerConn*)pServerArg;
  if( nBuf<=0 ) return 0;
  if( nBuf>0x7fffffff ){ fossil_fatal("SSL write too big"); }
  n = SSL_write(pServer->ssl, zBuf, (int)nBuf);
  if( n<=0 ){
    return -SSL_get_error(pServer->ssl, n);
  }else{
    return n;
  }
}

#endif /* FOSSIL_ENABLE_SSL */

/*
** COMMAND: tls-config*
** COMMAND: ssl-config
**
** Usage: %fossil ssl-config [SUBCOMMAND] [OPTIONS...] [ARGS...]
**
** This command is used to view or modify the TLS (Transport Layer
** Security) configuration for Fossil.  TLS (formerly SSL) is the
** encryption technology used for secure HTTPS transport.
**
** Sub-commands:
**
**   clear-cert                  Remove information about server certificates.
**                               This is a subset of the "scrub" command.
**
**   load-cert PEM-FILES...      Identify server certificate files. These
**                               should be in the PEM format.  There are
**                               normally two files, the certificate and the
**                               private-key.  By default, the text of both
**                               files is concatenated and added to the
**                               "ssl-cert" setting.  Use --filename to store
**                               just the filenames.
**
**   remove-exception DOMAINS    Remove TLS cert exceptions for the domains
**                               listed.  Or remove them all if the --all
**                               option is specified.
**
**   scrub ?--force?             Remove all SSL configuration data from the
**                               repository. Use --force to omit the
**                               confirmation.
**
**   show ?-v?                   Show the TLS configuration. Add -v to see
**                               additional explaination
*/
void test_tlsconfig_info(void){
  const char *zCmd;
  size_t nCmd;
  int nHit = 0;
  db_find_and_open_repository(OPEN_OK_NOT_FOUND|OPEN_SUBSTITUTE,0);
  db_open_config(1,0);
  if( g.argc==2 || (g.argc>=3 && g.argv[2][0]=='-') ){
    zCmd = "show";
    nCmd = 4;
  }else{
    zCmd = g.argv[2];
    nCmd = strlen(zCmd);
  }
  if( strncmp("clear-cert",zCmd,nCmd)==0 && nCmd>=4 ){
    int bForce = find_option("force","f",0)!=0;
    verify_all_options();
    if( !bForce ){
      Blob ans;
      char cReply;
      prompt_user(
        "Confirm removing of the SSL server certificate from this repository.\n"
        "The removal cannot be undone.  Continue (y/N)? ", &ans);
      cReply = blob_str(&ans)[0];
      if( cReply!='y' && cReply!='Y' ){
        fossil_exit(1);
      }
    }
    db_unprotect(PROTECT_ALL);
    db_multi_exec(
      "PRAGMA secure_delete=ON;"
      "DELETE FROM config "
      " WHERE name IN ('ssl-cert','ssl-cert-file','ssl-cert-key');"
    );
    db_protect_pop();
  }else
  if( strncmp("load-cert",zCmd,nCmd)==0 && nCmd>=4 ){
    int bFN = find_option("filename",0,0)!=0;
    int i;
    Blob allText = BLOB_INITIALIZER;
    int haveCert = 0;
    int haveKey = 0;
    verify_all_options();
    db_begin_transaction();
    db_unprotect(PROTECT_ALL);
    db_multi_exec(
      "PRAGMA secure_delete=ON;"
      "DELETE FROM config "
      " WHERE name IN ('ssl-cert','ssl-cert-file','ssl-cert-key');"
    );
    nHit = 0;
    for(i=3; i<g.argc; i++){
      Blob x;
      int isCert;
      int isKey;
      if( !file_isfile(g.argv[i], ExtFILE) ){
        fossil_fatal("no such file: \"%s\"", g.argv[i]);
      }
      blob_read_from_file(&x, g.argv[i], ExtFILE);
      isCert = strstr(blob_str(&x),"-----BEGIN CERTIFICATE-----")!=0;
      isKey = strstr(blob_str(&x),"-----BEGIN PRIVATE KEY-----")!=0;
      if( !isCert && !isKey ){
        fossil_fatal("not a certificate or a private key: \"%s\"", g.argv[i]);
      }
      if( isCert ){
        if( haveCert ){
          fossil_fatal("more than one certificate provided");
        }
        haveCert = 1;
        if( bFN ){
          db_set("ssl-cert-file", file_canonical_name_dup(g.argv[i]), 0);
        }else{
          blob_append(&allText, blob_buffer(&x), blob_size(&x));
        }
        if( isKey && !haveKey ){
          haveKey = 1;
          isKey = 0;
        }
      }
      if( isKey ){
        if( haveKey ){
          fossil_fatal("more than one private key provided");
        }
        haveKey = 1;
        if( bFN ){
          db_set("ssl-key-file", file_canonical_name_dup(g.argv[i]), 0);
        }else{
          blob_append(&allText, blob_buffer(&x), blob_size(&x));
        }
      }
    }
    db_protect_pop();
    if( !haveCert ){
      if( !haveKey ){
        fossil_fatal("missing certificate and private-key");
      }else{
        fossil_fatal("missing certificate");
      }
    }else if( !haveKey ){
      fossil_fatal("missing private-key");
    }
    if( !bFN ){
      db_set("ssl-cert", blob_str(&allText), 0);
    }
    db_commit_transaction();
  }else
  if( strncmp("scrub",zCmd,nCmd)==0 && nCmd>4 ){
    int bForce = find_option("force","f",0)!=0;
    verify_all_options();
    if( !bForce ){
      Blob ans;
      char cReply;
      prompt_user(
        "Scrubbing the SSL configuration will permanently delete information.\n"
        "Changes cannot be undone.  Continue (y/N)? ", &ans);
      cReply = blob_str(&ans)[0];
      if( cReply!='y' && cReply!='Y' ){
        fossil_exit(1);
      }
    }
    db_unprotect(PROTECT_ALL);
    db_multi_exec(
      "PRAGMA secure_delete=ON;"
      "DELETE FROM config WHERE name GLOB 'ssl-*';"
    );
    db_protect_pop();
  }else
  if( strncmp("show",zCmd,nCmd)==0 ){
    const char *zName, *zValue;
    size_t nName;
    Stmt q;
    int verbose = find_option("verbose","v",0)!=0;
    verify_all_options();

#if !defined(FOSSIL_ENABLE_SSL)
    fossil_print("OpenSSL-version:   (none)\n");
    if( verbose ){
      fossil_print("\n"
         "  The OpenSSL library is not used by this build of Fossil\n\n"
      );
    }
#else
    fossil_print("OpenSSL-version:   %s  (0x%09x)\n",
         SSLeay_version(SSLEAY_VERSION), OPENSSL_VERSION_NUMBER);
    if( verbose ){
      fossil_print("\n"
         "  The version of the OpenSSL library being used\n"
         "  by this instance of Fossil.  Version 3.0.0 or\n"
         "  later is recommended.\n\n"
      );
    }

    fossil_print("OpenSSL-cert-file: %s\n", X509_get_default_cert_file());
    fossil_print("OpenSSL-cert-dir:  %s\n", X509_get_default_cert_dir());
    if( verbose ){
      fossil_print("\n"
         "  The default locations for the set of root certificates\n"
         "  used by the \"fossil sync\" and similar commands to verify\n"
         "  the identity of servers for \"https:\" URLs. These values\n"
         "  come into play when Fossil is used as a TLS client.  These\n"
         "  values are built into your OpenSSL library.\n\n"
      );
    }

    zName = X509_get_default_cert_file_env();
    zValue = fossil_getenv(zName);
    if( zValue==0 ) zValue = "";
    nName = strlen(zName);
    fossil_print("%s:%*s%s\n", zName, 18-nName, "", zValue);
    zName = X509_get_default_cert_dir_env();
    zValue = fossil_getenv(zName);
    if( zValue==0 ) zValue = "";
    nName = strlen(zName);
    fossil_print("%s:%*s%s\n", zName, 18-nName, "", zValue);
    if( verbose ){
      fossil_print("\n"
        "  Alternative locations for the root certificates used by Fossil\n"
        "  when it is acting as a SSL client in order to verify the identity\n"
        "  of servers. If specified, these alternative locations override\n"
        "  the built-in locations.\n\n"
      );
    }
#endif /* FOSSIL_ENABLE_SSL */

    fossil_print("ssl-ca-location:   %s\n", db_get("ssl-ca-location",""));
    if( verbose ){
      fossil_print("\n"
         "  This setting is the name of a file or directory that contains\n"
         "  the complete set of root certificates to used by Fossil when it\n"
         "  is acting as a SSL client. If defined, this setting takes\n"
         "  priority over built-in paths and environment variables\n\n"
      );
    }

    fossil_print("ssl-identity:      %s\n", db_get("ssl-identity",""));
    if( verbose ){
      fossil_print("\n"
         "  This setting is the name of a file that contains the PEM-format\n"
         "  certificate and private-key used by Fossil clients to authentice\n"
         "  with servers. Few servers actually require this, so this setting\n"
         "  is usually blank.\n\n"
      );
    }

    zValue = db_get("ssl-cert",0);
    if( zValue ){
      fossil_print("ssl-cert:          (%d-byte PEM)\n", (int)strlen(zValue));
    }else{
      fossil_print("ssl-cert:\n");
    }
    if( verbose ){
      fossil_print("\n"
         "  This setting is the PEM-formatted value of the SSL server\n"
         "  certificate and private-key, used by Fossil when it is acting\n"
         "  as a server via the \"fossil server\" command or similar.\n\n"
      );
    }
    
    fossil_print("ssl-cert-file:     %s\n", db_get("ssl-cert-file",""));
    fossil_print("ssl-key-file:      %s\n", db_get("ssl-key-file",""));
    if( verbose ){
      fossil_print("\n"
         "  This settings are the names of files that contin the certificate\n"
         "  private-key used by Fossil when it is acting as a server.\n\n"
      );
    }

    db_prepare(&q,
       "SELECT name, '' FROM global_config"
       " WHERE name GLOB 'cert:*'"
       "UNION ALL "
       "SELECT name, date(mtime,'unixepoch') FROM config"
       " WHERE name GLOB 'cert:*'"
       " ORDER BY name"
    );
    nHit = 0;
    while( db_step(&q)==SQLITE_ROW ){
      fossil_print("exception:         %-40s %s\n",
           db_column_text(&q,0)+5, db_column_text(&q,1));
      nHit++;
    }
    db_finalize(&q);
    if( nHit && verbose ){
      fossil_print("\n"
         "  The exceptions are server certificates that the Fossil client\n"
         "  is unable to verify using root certificates, but which should be\n"
         "  accepted anyhow.\n\n"
      );
    }

  }else
  if( strncmp("remove-exception",zCmd,nCmd)==0 ){
    int i;
    Blob sql;
    char *zSep = "(";
    db_begin_transaction();
    blob_init(&sql, 0, 0);
    if( g.argc==4 && find_option("all",0,0)!=0 ){
      blob_append_sql(&sql,
        "DELETE FROM global_config WHERE name GLOB 'cert:*';\n"
        "DELETE FROM global_config WHERE name GLOB 'trusted:*';\n"
        "DELETE FROM config WHERE name GLOB 'cert:*';\n"
        "DELETE FROM config WHERE name GLOB 'trusted:*';\n"
      );
    }else{
      if( g.argc<4 ){
        usage("remove-exception DOMAIN-NAME ...");
      }
      blob_append_sql(&sql,"DELETE FROM global_config WHERE name IN ");
      for(i=3; i<g.argc; i++){
        blob_append_sql(&sql,"%s'cert:%q','trust:%q'",
           zSep/*safe-for-%s*/, g.argv[i], g.argv[i]);
        zSep = ",";
      }
      blob_append_sql(&sql,");\n");
      zSep = "(";
      blob_append_sql(&sql,"DELETE FROM config WHERE name IN ");
      for(i=3; i<g.argc; i++){
        blob_append_sql(&sql,"%s'cert:%q','trusted:%q'",
           zSep/*safe-for-%s*/, g.argv[i], g.argv[i]);
        zSep = ",";
      }
      blob_append_sql(&sql,");");
    }
    db_unprotect(PROTECT_CONFIG);
    db_exec_sql(blob_str(&sql));
    db_protect_pop();
    db_commit_transaction();
    blob_reset(&sql);
  }else
  /*default*/{
    fossil_fatal("unknown sub-command \"%s\".\nshould be one of:"
                 " clear-certs load-cert remove-exception scrub show",
       zCmd);
  }
}

/*
** WEBPAGE: .well-known
**
** If the "--acme" option was supplied to "fossil server" or "fossil http" or
** similar, then this page returns the content of files found in the
** ".well-known" subdirectory of the same directory that contains the
** repository file.  This facilitates Automated Certificate
** Management using tools like "certbot".
**
** The content is returned directly, without any interpretation, using
** a generic mimetype.
*/
void wellknown_page(void){
  char *zPath = 0;
  const char *zTail = P("name");
  Blob content;
  int i;
  char c;
  if( !g.fAllowACME ) goto wellknown_notfound;
  if( g.zRepositoryName==0 ) goto wellknown_notfound;
  if( zTail==0 ) goto wellknown_notfound;
  zPath = mprintf("%z/.well-known/%s", file_dirname(g.zRepositoryName), zTail);
  for(i=0; (c = zTail[i])!=0; i++){
    if( fossil_isalnum(c) ) continue;
    if( c=='.' ){
      if( i==0 || zTail[i-1]=='/' || zTail[i-1]=='.' ) goto wellknown_notfound;
      continue;
    }
    if( c==',' || c!='-' || c=='/' || c==':' || c=='_' || c=='~' ) continue;
    goto wellknown_notfound;
  }
  if( strstr("/..", zPath)!=0 ) goto wellknown_notfound;
  if( !file_isfile(zPath, ExtFILE) ) goto wellknown_notfound;
  blob_read_from_file(&content, zPath, ExtFILE);
  cgi_set_content(&content);
  cgi_set_content_type(mimetype_from_name(zPath));
  cgi_reply();
  return;

wellknown_notfound:
  fossil_free(zPath);
  webpage_notfound_error(0);
  return;
}
