Fossil

                 -DSQLITE_DQS=0 \
                 -DSQLITE_THREADSAFE=0 \
                 -DSQLITE_DEFAULT_MEMSTATUS=0 \
                 -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 \
                 -DSQLITE_LIKE_DOESNT_MATCH_BLOBS \
                 -DSQLITE_OMIT_DECLTYPE \
                 -DSQLITE_OMIT_DEPRECATED \

                 -DSQLITE_OMIT_PROGRESS_CALLBACK \
                 -DSQLITE_OMIT_SHARED_CACHE \
                 -DSQLITE_OMIT_LOAD_EXTENSION \
                 -DSQLITE_MAX_EXPR_DEPTH=0 \
                 -DSQLITE_USE_ALLOCA \
                 -DSQLITE_ENABLE_LOCKING_STYLE=0 \
                 -DSQLITE_DEFAULT_FILE_FORMAT=4 \

                -DSQLITE_DQS=0 \
                -DSQLITE_THREADSAFE=0 \
                -DSQLITE_DEFAULT_MEMSTATUS=0 \
                -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 \
                -DSQLITE_LIKE_DOESNT_MATCH_BLOBS \
                -DSQLITE_OMIT_DECLTYPE \
                -DSQLITE_OMIT_DEPRECATED \

                -DSQLITE_OMIT_PROGRESS_CALLBACK \
                -DSQLITE_OMIT_SHARED_CACHE \
                -DSQLITE_OMIT_LOAD_EXTENSION \
                -DSQLITE_MAX_EXPR_DEPTH=0 \
                -DSQLITE_USE_ALLOCA \
                -DSQLITE_ENABLE_LOCKING_STYLE=0 \
                -DSQLITE_DEFAULT_FILE_FORMAT=4 \

  -DSQLITE_DQS=0
  -DSQLITE_THREADSAFE=0
  -DSQLITE_DEFAULT_MEMSTATUS=0
  -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1
  -DSQLITE_LIKE_DOESNT_MATCH_BLOBS
  -DSQLITE_OMIT_DECLTYPE
  -DSQLITE_OMIT_DEPRECATED

  -DSQLITE_OMIT_PROGRESS_CALLBACK
  -DSQLITE_OMIT_SHARED_CACHE
  -DSQLITE_OMIT_LOAD_EXTENSION
  -DSQLITE_MAX_EXPR_DEPTH=0
  -DSQLITE_USE_ALLOCA
  -DSQLITE_ENABLE_LOCKING_STYLE=0
  -DSQLITE_DEFAULT_FILE_FORMAT=4

  char *zName;             /* Symbolic name for this session */
  int nFilter;             /* Number of xFilter rejection GLOB patterns */
  char **azFilter;         /* Array of xFilter rejection GLOB patterns */
  sqlite3_session *p;      /* The open session */
};
#endif













typedef struct ExpertInfo ExpertInfo;
struct ExpertInfo {
  sqlite3expert *pExpert;
  int bVerbose;
};

/* A single line in the EQP output */

  char *zDestTable;      /* Name of destination table when MODE_Insert */
  char *zTempFile;       /* Temporary file that might need deleting */
  char zTestcase[30];    /* Name of current test case */
  char colSeparator[20]; /* Column separator character for several modes */
  char rowSeparator[20]; /* Row separator character for MODE_Ascii */
  char colSepPrior[20];  /* Saved column separator */
  char rowSepPrior[20];  /* Saved row separator */
  int *colWidth;         /* Requested width of each column in columnar modes */
  int *actualWidth;      /* Actual width of each column */
  int nWidth;            /* Number of slots in colWidth[] and actualWidth[] */
  char nullValue[20];    /* The text to print when a NULL comes back from
                         ** the database */
  char outfile[FILENAME_MAX]; /* Filename for *out */
  const char *zDbFilename;    /* name of the database file */
  char *zFreeOnClose;         /* Filename to free when closing */
  const char *zVfs;           /* Name of VFS to use */
  sqlite3_stmt *pStmt;   /* Current statement if any. */

#define MODE_Quote    6  /* Quote values as for SQL */
#define MODE_Tcl      7  /* Generate ANSI-C or TCL quoted elements */
#define MODE_Csv      8  /* Quote strings, numbers are plain */
#define MODE_Explain  9  /* Like MODE_Column, but do not truncate data */
#define MODE_Ascii   10  /* Use ASCII unit and record separators (0x1F/0x1E) */
#define MODE_Pretty  11  /* Pretty-print schemas */
#define MODE_EQP     12  /* Converts EXPLAIN QUERY PLAN output into a graph */
#define MODE_Json    13  /* Output JSON */
#define MODE_Markdown 14 /* Markdown formatting */
#define MODE_Table   15  /* MySQL-style table formatting */

static const char *modeDescr[] = {
  "line",
  "column",
  "list",
  "semi",
  "html",
  "insert",
  "quote",
  "tcl",
  "csv",
  "explain",
  "ascii",
  "prettyprint",
  "eqp",
  "json",
  "markdown",
  "table"
};

/*
** These are the column/row/line separators used by the various
** import/export modes.
*/
#define SEP_Column    "|"

      raw_printf(out, "\\%03o", c&0xff);
    }else{
      fputc(c, out);
    }
  }
  fputc('"', out);
}

/*
** Output the given string as a quoted according to JSON quoting rules.
*/
static void output_json_string(FILE *out, const char *z, int n){
  unsigned int c;
  if( n<0 ) n = (int)strlen(z);
  fputc('"', out);
  while( n-- ){
    c = *(z++);
    if( c=='\\' || c=='"' ){
      fputc('\\', out);
      fputc(c, out);
    }else if( c<=0x1f ){
      fputc('\\', out);
      if( c=='\b' ){
        fputc('b', out);
      }else if( c=='\f' ){
        fputc('f', out);
      }else if( c=='\n' ){
        fputc('n', out);
      }else if( c=='\r' ){
        fputc('r', out);
      }else if( c=='\t' ){
        fputc('t', out);
      }else{
         raw_printf(out, "u%04x",c);
      }
    }else{
      fputc(c, out);
    }
  }
  fputc('"', out);
}

/*
** Output the given string with characters that are special to
** HTML escaped.
*/
static void output_html_string(FILE *out, const char *z){
  int i;

  }
  if( (p->flgProgress & SHELL_PROGRESS_QUIET)==0 ){
    raw_printf(p->out, "Progress %u\n", p->nProgress);
  }
  return 0;
}
#endif /* SQLITE_OMIT_PROGRESS_CALLBACK */

/*
** Print N dashes
*/
static void print_dashes(FILE *out, int N){
  const char zDash[] = "--------------------------------------------------";
  const int nDash = sizeof(zDash) - 1;
  while( N>nDash ){
    fputs(zDash, out);
    N -= nDash;
  }
  raw_printf(out, "%.*s", N, zDash);
}

/*
** Print a markdown or table-style row separator
*/
static void print_row_separator(
  ShellState *p,
  int nArg,
  const char *zSep
){
  int i;
  for(i=0; i<nArg; i++){
    fputs(zSep, p->out);
    print_dashes(p->out, p->actualWidth[i]+2);
  }
  fputs(zSep, p->out);
  fputs("\n", p->out);
}

/*
** This is the callback routine that the shell
** invokes for each row of a query result.
*/
static int shell_callback(
  void *pArg,
  int nArg,        /* Number of result columns */
  char **azArg,    /* Text of each result column */
  char **azCol,    /* Column names */
  int *aiType      /* Column types.  Might be NULL */
){
  int i;
  ShellState *p = (ShellState*)pArg;

  if( azArg==0 ) return 0;
  switch( p->cMode ){
    case MODE_Line: {
      int w = 5;
      if( azArg==0 ) break;
      for(i=0; i<nArg; i++){
        int len = strlen30(azCol[i] ? azCol[i] : "");
        if( len>w ) w = len;
      }
      if( p->cnt++>0 ) utf8_printf(p->out, "%s", p->rowSeparator);
      for(i=0; i<nArg; i++){
        utf8_printf(p->out,"%*s = %s%s", w, azCol[i],
                azArg[i] ? azArg[i] : p->nullValue, p->rowSeparator);
      }
      break;
    }
    case MODE_Explain: {

      static const int aExplainWidth[] = {4, 13, 4, 4, 4, 13, 2, 13};










      if( nArg>ArraySize(aExplainWidth) ){
        nArg = ArraySize(aExplainWidth);


      }
      if( p->cnt++==0 ){
        for(i=0; i<nArg; i++){


          int w = aExplainWidth[i];













          utf8_width_print(p->out, w, azCol[i]);















          fputs(i==nArg-1 ? "\n" : "  ", p->out);
        }
      }

      if( azArg==0 ) break;
      for(i=0; i<nArg; i++){


        int w = aExplainWidth[i];



        if( azArg[i] && strlenChar(azArg[i])>w ){
          w = strlenChar(azArg[i]);
        }
        if( i==1 && p->aiIndent && p->pStmt ){
          if( p->iIndent<p->nIndent ){
            utf8_printf(p->out, "%*.s", p->aiIndent[p->iIndent], "");
          }
          p->iIndent++;
        }
        utf8_width_print(p->out, w, azArg[i] ? azArg[i] : p->nullValue);
        fputs(i==nArg-1 ? "\n" : "  ", p->out);
      }
      break;
    }
    case MODE_Semi: {   /* .schema and .fullschema output */
      printSchemaLine(p->out, azArg[0], ";\n");
      break;
    }

          output_quoted_string(p->out, azArg[i]);
        }else{
          output_quoted_escaped_string(p->out, azArg[i]);
        }
      }
      raw_printf(p->out,");\n");
      break;
    }
    case MODE_Json: {
      if( azArg==0 ) break;
      if( p->cnt==0 ){
        fputs("[{", p->out);
      }else{
        fputs(",\n{", p->out);
      }
      p->cnt++;
      for(i=0; i<nArg; i++){
        output_json_string(p->out, azCol[i], -1);
        putc(':', p->out);
        if( (azArg[i]==0) || (aiType && aiType[i]==SQLITE_NULL) ){
          fputs("null",p->out);
        }else if( aiType && aiType[i]==SQLITE_FLOAT ){
          char z[50];
          double r = sqlite3_column_double(p->pStmt, i);
          sqlite3_uint64 ur;
          memcpy(&ur,&r,sizeof(r));
          if( ur==0x7ff0000000000000LL ){
            raw_printf(p->out, "1e999");
          }else if( ur==0xfff0000000000000LL ){
            raw_printf(p->out, "-1e999");
          }else{
            sqlite3_snprintf(50,z,"%!.20g", r);
            raw_printf(p->out, "%s", z);
          }
        }else if( aiType && aiType[i]==SQLITE_BLOB && p->pStmt ){
          const void *pBlob = sqlite3_column_blob(p->pStmt, i);
          int nBlob = sqlite3_column_bytes(p->pStmt, i);
          output_json_string(p->out, pBlob, nBlob);
        }else if( aiType && aiType[i]==SQLITE_TEXT ){
          output_json_string(p->out, azArg[i], -1);
        }else{
          utf8_printf(p->out,"%s", azArg[i]);
        }
        if( i<nArg-1 ){
          putc(',', p->out);
        }
      }
      putc('}', p->out);
      break;
    }
    case MODE_Quote: {
      if( azArg==0 ) break;
      if( p->cnt==0 && p->showHeader ){
        for(i=0; i<nArg; i++){
          if( i>0 ) fputs(p->colSeparator, p->out);
          output_quoted_string(p->out, azCol[i]);
        }
        fputs(p->rowSeparator, p->out);
      }
      p->cnt++;
      for(i=0; i<nArg; i++){
        if( i>0 ) fputs(p->colSeparator, p->out);
        if( (azArg[i]==0) || (aiType && aiType[i]==SQLITE_NULL) ){
          utf8_printf(p->out,"NULL");
        }else if( aiType && aiType[i]==SQLITE_TEXT ){
          output_quoted_string(p->out, azArg[i]);
        }else if( aiType && aiType[i]==SQLITE_INTEGER ){
          utf8_printf(p->out,"%s", azArg[i]);
        }else if( aiType && aiType[i]==SQLITE_FLOAT ){

          output_hex_blob(p->out, pBlob, nBlob);
        }else if( isNumber(azArg[i], 0) ){
          utf8_printf(p->out,"%s", azArg[i]);
        }else{
          output_quoted_string(p->out, azArg[i]);
        }
      }
      fputs(p->rowSeparator, p->out);
      break;
    }
    case MODE_Ascii: {
      if( p->cnt++==0 && p->showHeader ){
        for(i=0; i<nArg; i++){
          if( i>0 ) utf8_printf(p->out, "%s", p->colSeparator);
          utf8_printf(p->out,"%s",azCol[i] ? azCol[i] : "");

    }else{
      sqlite3_bind_null(pStmt, i);
    }
    sqlite3_reset(pQ);
  }
  sqlite3_finalize(pQ);
}

/*
** Run a prepared statement and output the result in one of the
** table-oriented formats: MODE_Column, MODE_Markdown, or MODE_Table.
**
** This is different from ordinary exec_prepared_stmt() in that
** it has to run the entire query and gather the results into memory
** first, in order to determine column widths, before providing
** any output.
*/
static void exec_prepared_stmt_columnar(
  ShellState *p,                        /* Pointer to ShellState */
  sqlite3_stmt *pStmt                   /* Statment to run */
){
  int nRow = 0;
  int nColumn = 0;
  char **azData = 0;
  char *zMsg = 0;
  const char *z;
  int rc;
  int i, j, nTotal, w, n;
  const char *colSep;
  const char *rowSep;

  rc = sqlite3_get_table(p->db, sqlite3_sql(pStmt),
                         &azData, &nRow, &nColumn, &zMsg);
  if( rc ){
    utf8_printf(p->out, "ERROR: %s\n", zMsg);
    sqlite3_free(zMsg);
    sqlite3_free_table(azData);
    return;
  }
  if( nColumn>p->nWidth ){
    p->colWidth = realloc(p->colWidth, nColumn*2*sizeof(int));
    if( p->colWidth==0 ) shell_out_of_memory();
    for(i=p->nWidth; i<nColumn; i++) p->colWidth[i] = 0;
    p->nWidth = nColumn;
    p->actualWidth = &p->colWidth[nColumn];
  }
  memset(p->actualWidth, 0, nColumn*sizeof(int));
  for(i=0; i<nColumn; i++){
    w = p->colWidth[i];
    if( w<0 ) w = -w;
    p->actualWidth[i] = w;
  }
  nTotal = nColumn*(nRow+1);
  for(i=0; i<nTotal; i++){
    z = azData[i];
    if( z==0 ) z = p->nullValue;
    n = strlenChar(z);
    j = i%nColumn;
    if( n>p->actualWidth[j] ) p->actualWidth[j] = n;
  }
  if( p->cMode==MODE_Column ){
    colSep = "  ";
    rowSep = "\n";
    if( p->showHeader ){
      for(i=0; i<nColumn; i++){
        w = p->actualWidth[i];
        if( p->colWidth[i]<0 ) w = -w;
        utf8_width_print(p->out, w, azData[i]);
        fputs(i==nColumn-1?"\n":"  ", p->out);
      }
      for(i=0; i<nColumn; i++){
        print_dashes(p->out, p->actualWidth[i]);
        fputs(i==nColumn-1?"\n":"  ", p->out);
      }
    }
  }else{
    colSep = " | ";
    rowSep = " |\n";
    if( p->cMode==MODE_Table ) print_row_separator(p, nColumn, "+");
    fputs("| ", p->out);
    for(i=0; i<nColumn; i++){
      w = p->actualWidth[i];
      n = strlenChar(azData[i]);
      utf8_printf(p->out, "%*s%s%*s", (w-n)/2, "", azData[i], (w-n+1)/2, "");
      fputs(i==nColumn-1?" |\n":" | ", p->out);
    }
    print_row_separator(p, nColumn, p->cMode==MODE_Table ? "+" : "|");
  }
  for(i=nColumn, j=0; i<nTotal; i++, j++){
    if( j==0 && p->cMode!=MODE_Column ) fputs("| ", p->out);
    z = azData[i];
    if( z==0 ) z = p->nullValue;
    w = p->actualWidth[j];
    if( p->colWidth[j]<0 ) w = -w;
    utf8_width_print(p->out, w, z);
    if( j==nColumn-1 ){
      fputs(rowSep, p->out);
      j = -1;
    }else{
      fputs(colSep, p->out);
    }
  }
  if( p->cMode==MODE_Table ){
    print_row_separator(p, nColumn, "+");
  }
  sqlite3_free_table(azData);
}

/*
** Run a prepared statement
*/
static void exec_prepared_stmt(
  ShellState *pArg,                                /* Pointer to ShellState */
  sqlite3_stmt *pStmt                              /* Statment to run */
){
  int rc;

  if( pArg->cMode==MODE_Column
   || pArg->cMode==MODE_Table
   || pArg->cMode==MODE_Markdown
  ){
    exec_prepared_stmt_columnar(pArg, pStmt);
    return;
  }

  /* perform the first step.  this will tell us if we
  ** have a result set or not and how wide it is.
  */
  rc = sqlite3_step(pStmt);
  /* if we have a result set... */
  if( SQLITE_ROW == rc ){

            rc = SQLITE_ABORT;
          }else{
            rc = sqlite3_step(pStmt);
          }
        }
      } while( SQLITE_ROW == rc );
      sqlite3_free(pData);
      if( pArg->cMode==MODE_Table ){
        print_row_separator(pArg, nCol, "+");
      }else if( pArg->cMode==MODE_Json ){
        fputs("]\n", pArg->out);
      }
    }
  }
}

#ifndef SQLITE_OMIT_VIRTUALTABLE
/*
** This function is called to process SQL if the previous shell command

      p->mode = MODE_List;
      sqlite3_snprintf(sizeof(p->colSeparator), p->colSeparator, SEP_Tab);
    }else if( c2=='i' && strncmp(azArg[1],"insert",n2)==0 ){
      p->mode = MODE_Insert;
      set_table_name(p, nArg>=3 ? azArg[2] : "table");
    }else if( c2=='q' && strncmp(azArg[1],"quote",n2)==0 ){
      p->mode = MODE_Quote;
      sqlite3_snprintf(sizeof(p->colSeparator), p->colSeparator, SEP_Comma);
      sqlite3_snprintf(sizeof(p->rowSeparator), p->rowSeparator, SEP_Row);
    }else if( c2=='a' && strncmp(azArg[1],"ascii",n2)==0 ){
      p->mode = MODE_Ascii;
      sqlite3_snprintf(sizeof(p->colSeparator), p->colSeparator, SEP_Unit);
      sqlite3_snprintf(sizeof(p->rowSeparator), p->rowSeparator, SEP_Record);
    }else if( c2=='m' && strncmp(azArg[1],"markdown",n2)==0 ){
      p->mode = MODE_Markdown;
    }else if( c2=='t' && strncmp(azArg[1],"table",n2)==0 ){
      p->mode = MODE_Table;
    }else if( c2=='j' && strncmp(azArg[1],"json",n2)==0 ){
      p->mode = MODE_Json;
    }else if( nArg==1 ){
      raw_printf(p->out, "current output mode: %s\n", modeDescr[p->mode]);
    }else{
      raw_printf(stderr, "Error: mode should be one of: "
         "ascii column csv html insert json line list markdown "
         "quote table tabs tcl\n");
      rc = 1;
    }
    p->cMode = p->mode;
  }else

  if( c=='n' && strncmp(azArg[0], "nullvalue", n)==0 ){
    if( nArg==2 ){

      output_c_string(p->out, p->colSeparator);
      raw_printf(p->out, "\n");
    utf8_printf(p->out,"%12.12s: ", "rowseparator");
      output_c_string(p->out, p->rowSeparator);
      raw_printf(p->out, "\n");
    utf8_printf(p->out, "%12.12s: %s\n","stats", azBool[p->statsOn!=0]);
    utf8_printf(p->out, "%12.12s: ", "width");
    for (i=0;i<p->nWidth;i++) {
      raw_printf(p->out, "%d ", p->colWidth[i]);
    }
    raw_printf(p->out, "\n");
    utf8_printf(p->out, "%12.12s: %s\n", "filename",
                p->zDbFilename ? p->zDbFilename : "");
  }else

    sqlite3WhereTrace = nArg>=2 ? booleanValue(azArg[1]) : 0xff;
  }else
#endif

  if( c=='w' && strncmp(azArg[0], "width", n)==0 ){
    int j;
    assert( nArg<=ArraySize(azArg) );
    p->nWidth = nArg-1;
    p->colWidth = realloc(p->colWidth, p->nWidth*sizeof(int)*2);
    if( p->colWidth==0 && p->nWidth>0 ) shell_out_of_memory();
    if( p->nWidth ) p->actualWidth = &p->colWidth[p->nWidth];
    for(j=1; j<nArg; j++){
      p->colWidth[j-1] = (int)integerValue(azArg[j]);
    }
  }else

  {
    utf8_printf(stderr, "Error: unknown command or invalid arguments: "
      " \"%s\". Enter \".help\" for help\n", azArg[0]);

  "   -[no]header          turn headers on or off\n"
#if defined(SQLITE_ENABLE_MEMSYS3) || defined(SQLITE_ENABLE_MEMSYS5)
  "   -heap SIZE           Size of heap for memsys3 or memsys5\n"
#endif
  "   -help                show this message\n"
  "   -html                set output mode to HTML\n"
  "   -interactive         force interactive I/O\n"
  "   -json                set output mode to 'json'\n"
  "   -line                set output mode to 'line'\n"
  "   -list                set output mode to 'list'\n"
  "   -lookaside SIZE N    use N entries of SZ bytes for lookaside memory\n"
  "   -markdown            set output mode to 'markdown'\n"
#if defined(SQLITE_ENABLE_DESERIALIZE)
  "   -maxsize N           maximum size for a --deserialize database\n"
#endif
  "   -memtrace            trace all memory allocations and deallocations\n"
  "   -mmap N              default mmap size set to N\n"
#ifdef SQLITE_ENABLE_MULTIPLEX
  "   -multiplex           enable the multiplexor VFS\n"
#endif
  "   -newline SEP         set output row separator. Default: '\\n'\n"
  "   -nofollow            refuse to open symbolic links to database files\n"
  "   -nullvalue TEXT      set text string for NULL values. Default ''\n"
  "   -pagecache SIZE N    use N slots of SZ bytes each for page cache memory\n"
  "   -quote               set output mode to 'quote'\n"
  "   -readonly            open the database read-only\n"
  "   -separator SEP       set output column separator. Default: '|'\n"
#ifdef SQLITE_ENABLE_SORTER_REFERENCES
  "   -sorterref SIZE      sorter references threshold size\n"
#endif
  "   -stats               print memory stats before each finalize\n"
  "   -table               set output mode to 'table'\n"
  "   -version             show SQLite version\n"
  "   -vfs NAME            use NAME as the default VFS\n"
#ifdef SQLITE_ENABLE_VFSTRACE
  "   -vfstrace            enable tracing of all VFS calls\n"
#endif
#ifdef SQLITE_HAVE_ZLIB
  "   -zip                 open the file as a ZIP Archive\n"

      data.mode = MODE_List;
    }else if( strcmp(z,"-quote")==0 ){
      data.mode = MODE_Quote;
    }else if( strcmp(z,"-line")==0 ){
      data.mode = MODE_Line;
    }else if( strcmp(z,"-column")==0 ){
      data.mode = MODE_Column;
    }else if( strcmp(z,"-json")==0 ){
      data.mode = MODE_Json;
    }else if( strcmp(z,"-markdown")==0 ){
      data.mode = MODE_Markdown;
    }else if( strcmp(z,"-table")==0 ){
      data.mode = MODE_Table;
    }else if( strcmp(z,"-csv")==0 ){
      data.mode = MODE_Csv;
      memcpy(data.colSeparator,",",2);
#ifdef SQLITE_HAVE_ZLIB
    }else if( strcmp(z,"-zip")==0 ){
      data.openMode = SHELL_OPEN_ZIPFILE;
#endif

  output_reset(&data);
  data.doXdgOpen = 0;
  clearTempFile(&data);
#if !SQLITE_SHELL_IS_UTF8
  for(i=0; i<argcToFree; i++) free(argvToFree[i]);
  free(argvToFree);
#endif
  free(data.colWidth);
  /* Clear the global data structure so that valgrind will detect memory
  ** leaks */
  memset(&data, 0, sizeof(data));
  return rc;
}

/******************************************************************************
** This file is an amalgamation of many separate C source files from SQLite
** version 3.33.0.  By combining all the individual C code files into this
** single large file, the entire code can be compiled as a single translation
** unit.  This allows many compilers to do optimizations that would not be
** possible if the files were compiled separately.  Performance improvements
** of 5% or more are commonly seen when SQLite is compiled as a single
** translation unit.
**
** This file is all you need to compile SQLite.  To use SQLite in other

** been edited in any way since it was last checked in, then the last
** four hexadecimal digits of the hash may be modified.
**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.33.0"
#define SQLITE_VERSION_NUMBER 3033000
#define SQLITE_SOURCE_ID      "2020-05-29 16:15:58 4e1db8e9a9ee370a398f13fd8546a520111b8cfb84460389535b5bc5bd9f4f82"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros

  **
  **   1. Checkpointer lock (ofst==1).
  **   2. Write lock (ofst==0).
  **   3. Read locks (ofst>=3 && ofst<SQLITE_SHM_NLOCK).
  **
  ** In other words, if this is a blocking lock, none of the locks that
  ** occur later in the above list than the lock being obtained may be
  ** held.  
  **
  ** It is not permitted to block on the RECOVER lock.
  */
#ifdef SQLITE_ENABLE_SETLK_TIMEOUT
  assert( (flags & SQLITE_SHM_UNLOCK) || pDbFd->iBusyTimeout==0 || (
         (ofst!=2)                                   /* not RECOVER */
      && (ofst!=1 || (p->exclMask|p->sharedMask)==0)
      && (ofst!=0 || (p->exclMask|p->sharedMask)<3)
      && (ofst<3  || (p->exclMask|p->sharedMask)<(1<<ofst))
  ));

  /* If the VDBE has been run even partially, then transfer the error code
  ** and error message from the VDBE into the main database structure.  But
  ** if the VDBE has just been set to run but has not actually executed any
  ** instructions yet, leave the main database error information unchanged.
  */
  if( p->pc>=0 ){
    vdbeInvokeSqllog(p);
    if( db->pErr || p->zErrMsg ){
      sqlite3VdbeTransferError(p);
    }else{
      db->errCode = p->rc;
    }
    if( p->runOnlyOnce ) p->expired = 1;
  }else if( p->rc && p->expired ){
    /* The expired flag was set on the VDBE before the first call
    ** to sqlite3_step(). For consistency (since sqlite3_step() was
    ** called), set the database error in this case as well.
    */
    sqlite3ErrorWithMsg(db, p->rc, p->zErrMsg ? "%s" : 0, p->zErrMsg);
  }

  /* Reset register contents and reclaim error message memory.
  */
#ifdef SQLITE_DEBUG
  /* Execute assert() statements to ensure that the Vdbe.apCsr[] and 
  ** Vdbe.aMem[] arrays have already been cleaned up.  */
  if( p->apCsr ) for(i=0; i<p->nCursor; i++) assert( p->apCsr[i]==0 );
  if( p->aMem ){
    for(i=0; i<p->nMem; i++) assert( p->aMem[i].flags==MEM_Undefined );
  }
#endif
  if( p->zErrMsg ){
    sqlite3DbFree(db, p->zErrMsg);
    p->zErrMsg = 0;
  }
  p->pResultSet = 0;
#ifdef SQLITE_DEBUG
  p->nWrite = 0;
#endif

  /* Save profiling information from this VDBE run.
  */

  /* Check to see if an existing table or index can be used to
  ** satisfy the query.  This is preferable to generating a new 
  ** ephemeral table.  */
  if( pParse->nErr==0 && (p = isCandidateForInOpt(pX))!=0 ){
    sqlite3 *db = pParse->db;              /* Database connection */
    Table *pTab;                           /* Table <table>. */
    int iDb;                               /* Database idx for pTab */
    ExprList *pEList = p->pEList;
    int nExpr = pEList->nExpr;

    assert( p->pEList!=0 );             /* Because of isCandidateForInOpt(p) */
    assert( p->pEList->a[0].pExpr!=0 ); /* Because of isCandidateForInOpt(p) */
    assert( p->pSrc!=0 );               /* Because of isCandidateForInOpt(p) */
    pTab = p->pSrc->a[0].pTab;

    /* Code an OP_Transaction and OP_TableLock for <table>. */
    iDb = sqlite3SchemaToIndex(db, pTab->pSchema);
    assert( iDb>=0 && iDb<SQLITE_MAX_ATTACHED );
    sqlite3CodeVerifySchema(pParse, iDb);
    sqlite3TableLock(pParse, iDb, pTab->tnum, 0, pTab->zName);

    assert(v);  /* sqlite3GetVdbe() has always been previously called */
    if( nExpr==1 && pEList->a[0].pExpr->iColumn<0 ){
      /* The "x IN (SELECT rowid FROM table)" case */
      int iAddr = sqlite3VdbeAddOp0(v, OP_Once);

  int regFree1 = 0;         /* If non-zero free this temporary register */
  int regFree2 = 0;         /* If non-zero free this temporary register */
  int r1, r2;               /* Various register numbers */
  Expr tempX;               /* Temporary expression node */
  int p5 = 0;

  assert( target>0 && target<=pParse->nMem );

  assert( v!=0 );



expr_code_doover:
  if( pExpr==0 ){
    op = TK_NULL;
  }else{
    assert( !ExprHasVVAProperty(pExpr,EP_Immutable) );
    op = pExpr->op;

** in register target.
*/
SQLITE_PRIVATE void sqlite3ExprCode(Parse *pParse, Expr *pExpr, int target){
  int inReg;

  assert( pExpr==0 || !ExprHasVVAProperty(pExpr,EP_Immutable) );
  assert( target>0 && target<=pParse->nMem );

  assert( pParse->pVdbe!=0 || pParse->db->mallocFailed );
  if( pParse->pVdbe==0 ) return;
  inReg = sqlite3ExprCodeTarget(pParse, pExpr, target);
  if( inReg!=target ){
    u8 op;
    if( ExprHasProperty(pExpr,EP_Subquery) ){
      op = OP_Copy;
    }else{
      op = OP_SCopy;
    }
    sqlite3VdbeAddOp2(pParse->pVdbe, op, inReg, target);

**           aiRowEst[N]>=1
**
** Apart from that, we have little to go on besides intuition as to
** how aiRowEst[] should be initialized.  The numbers generated here
** are based on typical values found in actual indices.
*/
SQLITE_PRIVATE void sqlite3DefaultRowEst(Index *pIdx){
               /*                10,  9,  8,  7,  6 */
  static const LogEst aVal[] = { 33, 32, 30, 28, 26 };
  LogEst *a = pIdx->aiRowLogEst;
  LogEst x;
  int nCopy = MIN(ArraySize(aVal), pIdx->nKeyCol);
  int i;

  /* Indexes with default row estimates should not have stat1 data */
  assert( !pIdx->hasStat1 );

  /* Set the first entry (number of rows in the index) to the estimated 
  ** number of rows in the table, or half the number of rows in the table
  ** for a partial index.
  **
  ** 2020-05-27:  If some of the stat data is coming from the sqlite_stat1
  ** table but other parts we are having to guess at, then do not let the
  ** estimated number of rows in the table be less than 1000 (LogEst 99).
  ** Failure to do this can cause the indexes for which we do not have
  ** stat1 data to be ignored by the query planner.  tag-20200527-1
  */
  x = pIdx->pTable->nRowLogEst;
  assert( 99==sqlite3LogEst(1000) );
  if( x<99 ){
    pIdx->pTable->nRowLogEst = x = 99;
  }
  if( pIdx->pPartIdxWhere!=0 ) x -= 10;  assert( 10==sqlite3LogEst(2) );
  a[0] = x;

  /* Estimate that a[1] is 10, a[2] is 9, a[3] is 8, a[4] is 7, a[5] is
  ** 6 and each subsequent value (if any) is 5.  */
  memcpy(&a[1], aVal, nCopy*sizeof(LogEst));
  for(i=nCopy+1; i<=pIdx->nKeyCol; i++){
    a[i] = 23;                    assert( 23==sqlite3LogEst(5) );
  }

** Convert a schema pointer into the iDb index that indicates
** which database file in db->aDb[] the schema refers to.
**
** If the same database is attached more than once, the first
** attached database is returned.
*/
SQLITE_PRIVATE int sqlite3SchemaToIndex(sqlite3 *db, Schema *pSchema){
  int i = -32768;

  /* If pSchema is NULL, then return -32768. This happens when code in 
  ** expr.c is trying to resolve a reference to a transient table (i.e. one
  ** created by a sub-select). In this case the return value of this 
  ** function should never be used.
  **
  ** We return -32768 instead of the more usual -1 simply because using
  ** -32768 as the incorrect index into db->aDb[] is much 
  ** more likely to cause a segfault than -1 (of course there are assert()
  ** statements too, but it never hurts to play the odds) and
  ** -32768 will still fit into a 16-bit signed integer.
  */
  assert( sqlite3_mutex_held(db->mutex) );
  if( pSchema ){
    for(i=0; 1; i++){
      assert( i<db->nDb );
      if( db->aDb[i].pSchema==pSchema ){
        break;

  Expr *pWhere,         /* the WHERE clause */
  ExprList *pGroupBy,   /* the GROUP BY clause */
  Expr *pHaving,        /* the HAVING clause */
  ExprList *pOrderBy,   /* the ORDER BY clause */
  u32 selFlags,         /* Flag parameters, such as SF_Distinct */
  Expr *pLimit          /* LIMIT value.  NULL means not used */
){
  Select *pNew, *pAllocated;
  Select standin;
  pAllocated = pNew = sqlite3DbMallocRawNN(pParse->db, sizeof(*pNew) );
  if( pNew==0 ){
    assert( pParse->db->mallocFailed );
    pNew = &standin;
  }
  if( pEList==0 ){
    pEList = sqlite3ExprListAppend(pParse, 0,
                                   sqlite3Expr(pParse->db,TK_ASTERISK,0));

  pNew->pWith = 0;
#ifndef SQLITE_OMIT_WINDOWFUNC
  pNew->pWin = 0;
  pNew->pWinDefn = 0;
#endif
  if( pParse->db->mallocFailed ) {
    clearSelect(pParse->db, pNew, pNew!=&standin);
    pAllocated = 0;
  }else{
    assert( pNew->pSrc!=0 || pParse->nErr>0 );
  }

  return pAllocated;
}


/*
** Delete the given Select structure and all of its substructures.
*/
SQLITE_PRIVATE void sqlite3SelectDelete(sqlite3 *db, Select *p){

static void fts5SourceIdFunc(
  sqlite3_context *pCtx,          /* Function call context */
  int nArg,                       /* Number of args */
  sqlite3_value **apUnused        /* Function arguments */
){
  assert( nArg==0 );
  UNUSED_PARAM2(nArg, apUnused);
  sqlite3_result_text(pCtx, "fts5: 2020-05-29 16:15:58 4e1db8e9a9ee370a398f13fd8546a520111b8cfb84460389535b5bc5bd9f4f82", -1, SQLITE_TRANSIENT);
}

/*
** Return true if zName is the extension on one of the shadow tables used
** by this module.
*/
static int fts5ShadowName(const char *zName){

#endif
  return rc;
}
#endif /* SQLITE_CORE */
#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_STMTVTAB) */

/************** End of stmt.c ************************************************/
#if __LINE__!=229628
#undef SQLITE_SOURCE_ID
#define SQLITE_SOURCE_ID      "2020-05-29 16:15:58 4e1db8e9a9ee370a398f13fd8546a520111b8cfb84460389535b5bc5bd9falt2"
#endif
/* Return the source-id for this library */
SQLITE_API const char *sqlite3_sourceid(void){ return SQLITE_SOURCE_ID; }
/************************** End of sqlite3.c ******************************/

** been edited in any way since it was last checked in, then the last
** four hexadecimal digits of the hash may be modified.
**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.33.0"
#define SQLITE_VERSION_NUMBER 3033000
#define SQLITE_SOURCE_ID      "2020-05-29 16:15:58 4e1db8e9a9ee370a398f13fd8546a520111b8cfb84460389535b5bc5bd9f4f82"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros

UTILS_OBJ=$(UTILS:.exe=.obj)
UTILS_SRC=$(foreach uf,$(UTILS),$(SRCDIR)$(uf:.exe=.c))

# define the SQLite files, which need special flags on compile
SQLITESRC=sqlite3.c
ORIGSQLITESRC=$(foreach sf,$(SQLITESRC),$(SRCDIR)$(sf))
SQLITEOBJ=$(foreach sf,$(SQLITESRC),$(sf:.c=.obj))
SQLITEDEFINES=-DNDEBUG=1 -DSQLITE_DQS=0 -DSQLITE_THREADSAFE=0 -DSQLITE_DEFAULT_MEMSTATUS=0 -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 -DSQLITE_LIKE_DOESNT_MATCH_BLOBS -DSQLITE_OMIT_DECLTYPE -DSQLITE_OMIT_DEPRECATED -DSQLITE_OMIT_PROGRESS_CALLBACK -DSQLITE_OMIT_SHARED_CACHE -DSQLITE_OMIT_LOAD_EXTENSION -DSQLITE_MAX_EXPR_DEPTH=0 -DSQLITE_USE_ALLOCA -DSQLITE_ENABLE_LOCKING_STYLE=0 -DSQLITE_DEFAULT_FILE_FORMAT=4 -DSQLITE_ENABLE_EXPLAIN_COMMENTS -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_DBSTAT_VTAB -DSQLITE_ENABLE_JSON1 -DSQLITE_ENABLE_FTS5 -DSQLITE_ENABLE_STMTVTAB -DSQLITE_HAVE_ZLIB -DSQLITE_INTROSPECTION_PRAGMAS -DSQLITE_ENABLE_DBPAGE_VTAB -DSQLITE_TRUSTED_SCHEMA=0 -DSQLITE_WIN32_NO_ANSI

# define the SQLite shell files, which need special flags on compile
SQLITESHELLSRC=shell.c
ORIGSQLITESHELLSRC=$(foreach sf,$(SQLITESHELLSRC),$(SRCDIR)$(sf))
SQLITESHELLOBJ=$(foreach sf,$(SQLITESHELLSRC),$(sf:.c=.obj))
SQLITESHELLDEFINES=-DNDEBUG=1 -DSQLITE_DQS=0 -DSQLITE_THREADSAFE=0 -DSQLITE_DEFAULT_MEMSTATUS=0 -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 -DSQLITE_LIKE_DOESNT_MATCH_BLOBS -DSQLITE_OMIT_DECLTYPE -DSQLITE_OMIT_DEPRECATED -DSQLITE_OMIT_PROGRESS_CALLBACK -DSQLITE_OMIT_SHARED_CACHE -DSQLITE_OMIT_LOAD_EXTENSION -DSQLITE_MAX_EXPR_DEPTH=0 -DSQLITE_USE_ALLOCA -DSQLITE_ENABLE_LOCKING_STYLE=0 -DSQLITE_DEFAULT_FILE_FORMAT=4 -DSQLITE_ENABLE_EXPLAIN_COMMENTS -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_DBSTAT_VTAB -DSQLITE_ENABLE_JSON1 -DSQLITE_ENABLE_FTS5 -DSQLITE_ENABLE_STMTVTAB -DSQLITE_HAVE_ZLIB -DSQLITE_INTROSPECTION_PRAGMAS -DSQLITE_ENABLE_DBPAGE_VTAB -DSQLITE_TRUSTED_SCHEMA=0 -Dmain=sqlite3_shell -DSQLITE_SHELL_IS_UTF8=1 -DSQLITE_OMIT_LOAD_EXTENSION=1 -DUSE_SYSTEM_SQLITE=$(USE_SYSTEM_SQLITE) -DSQLITE_SHELL_DBNAME_PROC=sqlcmd_get_dbname -DSQLITE_SHELL_INIT_PROC=sqlcmd_init_proc -Daccess=file_access -Dsystem=fossil_system -Dgetenv=fossil_getenv -Dfopen=fossil_fopen

# define the th scripting files, which need special flags on compile
THSRC=th.c th_lang.c
ORIGTHSRC=$(foreach sf,$(THSRC),$(SRCDIR)$(sf))
THOBJ=$(foreach sf,$(THSRC),$(sf:.c=.obj))

# define the zlib files, needed by this compile

SSL    =

CFLAGS = -o
BCC    = $(DMDIR)\bin\dmc $(CFLAGS)
TCC    = $(DMDIR)\bin\dmc $(CFLAGS) $(DMCDEF) $(SSL) $(INCL)
LIBS   = $(DMDIR)\extra\lib\ zlib wsock32 advapi32 dnsapi

SQLITE_OPTIONS = -DNDEBUG=1 -DSQLITE_DQS=0 -DSQLITE_THREADSAFE=0 -DSQLITE_DEFAULT_MEMSTATUS=0 -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 -DSQLITE_LIKE_DOESNT_MATCH_BLOBS -DSQLITE_OMIT_DECLTYPE -DSQLITE_OMIT_DEPRECATED -DSQLITE_OMIT_PROGRESS_CALLBACK -DSQLITE_OMIT_SHARED_CACHE -DSQLITE_OMIT_LOAD_EXTENSION -DSQLITE_MAX_EXPR_DEPTH=0 -DSQLITE_USE_ALLOCA -DSQLITE_ENABLE_LOCKING_STYLE=0 -DSQLITE_DEFAULT_FILE_FORMAT=4 -DSQLITE_ENABLE_EXPLAIN_COMMENTS -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_DBSTAT_VTAB -DSQLITE_ENABLE_JSON1 -DSQLITE_ENABLE_FTS5 -DSQLITE_ENABLE_STMTVTAB -DSQLITE_HAVE_ZLIB -DSQLITE_INTROSPECTION_PRAGMAS -DSQLITE_ENABLE_DBPAGE_VTAB -DSQLITE_TRUSTED_SCHEMA=0

SHELL_OPTIONS = -DNDEBUG=1 -DSQLITE_DQS=0 -DSQLITE_THREADSAFE=0 -DSQLITE_DEFAULT_MEMSTATUS=0 -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 -DSQLITE_LIKE_DOESNT_MATCH_BLOBS -DSQLITE_OMIT_DECLTYPE -DSQLITE_OMIT_DEPRECATED -DSQLITE_OMIT_PROGRESS_CALLBACK -DSQLITE_OMIT_SHARED_CACHE -DSQLITE_OMIT_LOAD_EXTENSION -DSQLITE_MAX_EXPR_DEPTH=0 -DSQLITE_USE_ALLOCA -DSQLITE_ENABLE_LOCKING_STYLE=0 -DSQLITE_DEFAULT_FILE_FORMAT=4 -DSQLITE_ENABLE_EXPLAIN_COMMENTS -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_DBSTAT_VTAB -DSQLITE_ENABLE_JSON1 -DSQLITE_ENABLE_FTS5 -DSQLITE_ENABLE_STMTVTAB -DSQLITE_HAVE_ZLIB -DSQLITE_INTROSPECTION_PRAGMAS -DSQLITE_ENABLE_DBPAGE_VTAB -DSQLITE_TRUSTED_SCHEMA=0 -Dmain=sqlite3_shell -DSQLITE_SHELL_IS_UTF8=1 -DSQLITE_OMIT_LOAD_EXTENSION=1 -DUSE_SYSTEM_SQLITE=$(USE_SYSTEM_SQLITE) -DSQLITE_SHELL_DBNAME_PROC=sqlcmd_get_dbname -DSQLITE_SHELL_INIT_PROC=sqlcmd_init_proc -Daccess=file_access -Dsystem=fossil_system -Dgetenv=fossil_getenv -Dfopen=fossil_fopen

SRC   = add_.c alerts_.c allrepo_.c attach_.c backlink_.c backoffice_.c bag_.c bisect_.c blob_.c branch_.c browse_.c builtin_.c bundle_.c cache_.c capabilities_.c captcha_.c cgi_.c checkin_.c checkout_.c clearsign_.c clone_.c comformat_.c configure_.c content_.c cookies_.c db_.c delta_.c deltacmd_.c deltafunc_.c descendants_.c diff_.c diffcmd_.c dispatch_.c doc_.c encode_.c etag_.c event_.c export_.c extcgi_.c file_.c fileedit_.c finfo_.c foci_.c forum_.c fshell_.c fusefs_.c fuzz_.c glob_.c graph_.c gzip_.c hname_.c http_.c http_socket_.c http_ssl_.c http_transport_.c import_.c info_.c json_.c json_artifact_.c json_branch_.c json_config_.c json_diff_.c json_dir_.c json_finfo_.c json_login_.c json_query_.c json_report_.c json_status_.c json_tag_.c json_timeline_.c json_user_.c json_wiki_.c leaf_.c loadctrl_.c login_.c lookslike_.c main_.c manifest_.c markdown_.c markdown_html_.c md5_.c merge_.c merge3_.c moderate_.c name_.c path_.c piechart_.c pivot_.c popen_.c pqueue_.c printf_.c publish_.c purge_.c rebuild_.c regexp_.c repolist_.c report_.c rss_.c schema_.c search_.c security_audit_.c setup_.c setupuser_.c sha1_.c sha1hard_.c sha3_.c shun_.c sitemap_.c skins_.c smtp_.c sqlcmd_.c stash_.c stat_.c statrep_.c style_.c sync_.c tag_.c tar_.c terminal_.c th_main_.c timeline_.c tkt_.c tktsetup_.c undo_.c unicode_.c unversioned_.c update_.c url_.c user_.c utf8_.c util_.c verify_.c vfile_.c webmail_.c wiki_.c wikiformat_.c winfile_.c winhttp_.c wysiwyg_.c xfer_.c xfersetup_.c zip_.c

OBJ   = $(OBJDIR)\add$O $(OBJDIR)\alerts$O $(OBJDIR)\allrepo$O $(OBJDIR)\attach$O $(OBJDIR)\backlink$O $(OBJDIR)\backoffice$O $(OBJDIR)\bag$O $(OBJDIR)\bisect$O $(OBJDIR)\blob$O $(OBJDIR)\branch$O $(OBJDIR)\browse$O $(OBJDIR)\builtin$O $(OBJDIR)\bundle$O $(OBJDIR)\cache$O $(OBJDIR)\capabilities$O $(OBJDIR)\captcha$O $(OBJDIR)\cgi$O $(OBJDIR)\checkin$O $(OBJDIR)\checkout$O $(OBJDIR)\clearsign$O $(OBJDIR)\clone$O $(OBJDIR)\comformat$O $(OBJDIR)\configure$O $(OBJDIR)\content$O $(OBJDIR)\cookies$O $(OBJDIR)\db$O $(OBJDIR)\delta$O $(OBJDIR)\deltacmd$O $(OBJDIR)\deltafunc$O $(OBJDIR)\descendants$O $(OBJDIR)\diff$O $(OBJDIR)\diffcmd$O $(OBJDIR)\dispatch$O $(OBJDIR)\doc$O $(OBJDIR)\encode$O $(OBJDIR)\etag$O $(OBJDIR)\event$O $(OBJDIR)\export$O $(OBJDIR)\extcgi$O $(OBJDIR)\file$O $(OBJDIR)\fileedit$O $(OBJDIR)\finfo$O $(OBJDIR)\foci$O $(OBJDIR)\forum$O $(OBJDIR)\fshell$O $(OBJDIR)\fusefs$O $(OBJDIR)\fuzz$O $(OBJDIR)\glob$O $(OBJDIR)\graph$O $(OBJDIR)\gzip$O $(OBJDIR)\hname$O $(OBJDIR)\http$O $(OBJDIR)\http_socket$O $(OBJDIR)\http_ssl$O $(OBJDIR)\http_transport$O $(OBJDIR)\import$O $(OBJDIR)\info$O $(OBJDIR)\json$O $(OBJDIR)\json_artifact$O $(OBJDIR)\json_branch$O $(OBJDIR)\json_config$O $(OBJDIR)\json_diff$O $(OBJDIR)\json_dir$O $(OBJDIR)\json_finfo$O $(OBJDIR)\json_login$O $(OBJDIR)\json_query$O $(OBJDIR)\json_report$O $(OBJDIR)\json_status$O $(OBJDIR)\json_tag$O $(OBJDIR)\json_timeline$O $(OBJDIR)\json_user$O $(OBJDIR)\json_wiki$O $(OBJDIR)\leaf$O $(OBJDIR)\loadctrl$O $(OBJDIR)\login$O $(OBJDIR)\lookslike$O $(OBJDIR)\main$O $(OBJDIR)\manifest$O $(OBJDIR)\markdown$O $(OBJDIR)\markdown_html$O $(OBJDIR)\md5$O $(OBJDIR)\merge$O $(OBJDIR)\merge3$O $(OBJDIR)\moderate$O $(OBJDIR)\name$O $(OBJDIR)\path$O $(OBJDIR)\piechart$O $(OBJDIR)\pivot$O $(OBJDIR)\popen$O $(OBJDIR)\pqueue$O $(OBJDIR)\printf$O $(OBJDIR)\publish$O $(OBJDIR)\purge$O $(OBJDIR)\rebuild$O $(OBJDIR)\regexp$O $(OBJDIR)\repolist$O $(OBJDIR)\report$O $(OBJDIR)\rss$O $(OBJDIR)\schema$O $(OBJDIR)\search$O $(OBJDIR)\security_audit$O $(OBJDIR)\setup$O $(OBJDIR)\setupuser$O $(OBJDIR)\sha1$O $(OBJDIR)\sha1hard$O $(OBJDIR)\sha3$O $(OBJDIR)\shun$O $(OBJDIR)\sitemap$O $(OBJDIR)\skins$O $(OBJDIR)\smtp$O $(OBJDIR)\sqlcmd$O $(OBJDIR)\stash$O $(OBJDIR)\stat$O $(OBJDIR)\statrep$O $(OBJDIR)\style$O $(OBJDIR)\sync$O $(OBJDIR)\tag$O $(OBJDIR)\tar$O $(OBJDIR)\terminal$O $(OBJDIR)\th_main$O $(OBJDIR)\timeline$O $(OBJDIR)\tkt$O $(OBJDIR)\tktsetup$O $(OBJDIR)\undo$O $(OBJDIR)\unicode$O $(OBJDIR)\unversioned$O $(OBJDIR)\update$O $(OBJDIR)\url$O $(OBJDIR)\user$O $(OBJDIR)\utf8$O $(OBJDIR)\util$O $(OBJDIR)\verify$O $(OBJDIR)\vfile$O $(OBJDIR)\webmail$O $(OBJDIR)\wiki$O $(OBJDIR)\wikiformat$O $(OBJDIR)\winfile$O $(OBJDIR)\winhttp$O $(OBJDIR)\wysiwyg$O $(OBJDIR)\xfer$O $(OBJDIR)\xfersetup$O $(OBJDIR)\zip$O $(OBJDIR)\shell$O $(OBJDIR)\sqlite3$O $(OBJDIR)\th$O $(OBJDIR)\th_lang$O


RC=$(DMDIR)\bin\rcc

                 -DSQLITE_DQS=0 \
                 -DSQLITE_THREADSAFE=0 \
                 -DSQLITE_DEFAULT_MEMSTATUS=0 \
                 -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 \
                 -DSQLITE_LIKE_DOESNT_MATCH_BLOBS \
                 -DSQLITE_OMIT_DECLTYPE \
                 -DSQLITE_OMIT_DEPRECATED \

                 -DSQLITE_OMIT_PROGRESS_CALLBACK \
                 -DSQLITE_OMIT_SHARED_CACHE \
                 -DSQLITE_OMIT_LOAD_EXTENSION \
                 -DSQLITE_MAX_EXPR_DEPTH=0 \
                 -DSQLITE_USE_ALLOCA \
                 -DSQLITE_ENABLE_LOCKING_STYLE=0 \
                 -DSQLITE_DEFAULT_FILE_FORMAT=4 \

                -DSQLITE_DQS=0 \
                -DSQLITE_THREADSAFE=0 \
                -DSQLITE_DEFAULT_MEMSTATUS=0 \
                -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 \
                -DSQLITE_LIKE_DOESNT_MATCH_BLOBS \
                -DSQLITE_OMIT_DECLTYPE \
                -DSQLITE_OMIT_DEPRECATED \

                -DSQLITE_OMIT_PROGRESS_CALLBACK \
                -DSQLITE_OMIT_SHARED_CACHE \
                -DSQLITE_OMIT_LOAD_EXTENSION \
                -DSQLITE_MAX_EXPR_DEPTH=0 \
                -DSQLITE_USE_ALLOCA \
                -DSQLITE_ENABLE_LOCKING_STYLE=0 \
                -DSQLITE_DEFAULT_FILE_FORMAT=4 \

                 /DSQLITE_DQS=0 \
                 /DSQLITE_THREADSAFE=0 \
                 /DSQLITE_DEFAULT_MEMSTATUS=0 \
                 /DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 \
                 /DSQLITE_LIKE_DOESNT_MATCH_BLOBS \
                 /DSQLITE_OMIT_DECLTYPE \
                 /DSQLITE_OMIT_DEPRECATED \

                 /DSQLITE_OMIT_PROGRESS_CALLBACK \
                 /DSQLITE_OMIT_SHARED_CACHE \
                 /DSQLITE_OMIT_LOAD_EXTENSION \
                 /DSQLITE_MAX_EXPR_DEPTH=0 \
                 /DSQLITE_USE_ALLOCA \
                 /DSQLITE_ENABLE_LOCKING_STYLE=0 \
                 /DSQLITE_DEFAULT_FILE_FORMAT=4 \

                /DSQLITE_DQS=0 \
                /DSQLITE_THREADSAFE=0 \
                /DSQLITE_DEFAULT_MEMSTATUS=0 \
                /DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 \
                /DSQLITE_LIKE_DOESNT_MATCH_BLOBS \
                /DSQLITE_OMIT_DECLTYPE \
                /DSQLITE_OMIT_DEPRECATED \

                /DSQLITE_OMIT_PROGRESS_CALLBACK \
                /DSQLITE_OMIT_SHARED_CACHE \
                /DSQLITE_OMIT_LOAD_EXTENSION \
                /DSQLITE_MAX_EXPR_DEPTH=0 \
                /DSQLITE_USE_ALLOCA \
                /DSQLITE_ENABLE_LOCKING_STYLE=0 \
                /DSQLITE_DEFAULT_FILE_FORMAT=4 \