Fossil

# See www/containers.md for documentation on how to use this file.

## ---------------------------------------------------------------------
## STAGE 1: Build static Fossil & BusyBox binaries atop Alpine Linux
## ---------------------------------------------------------------------

FROM alpine:latest AS builder
WORKDIR /tmp



### Bake the basic Alpine Linux into a base layer so we never have to
### repeat that step unless we change the package set.  Although we're
### going to throw this layer away below, we still pass --no-cache
### because that cache is of no use in an immutable layer.  Note that
### we allow the UPX step to fail: it isn't in the ARM distros.  We'll
### check whether this optional piece exists before using it below.
RUN set -x                                                             \
    && apk update                                                      \
    && apk upgrade --no-cache                                          \
    && apk add --no-cache                                              \
         gcc make moreutils                                            \
         linux-headers musl-dev                                        \
         openssl-dev openssl-libs-static                               \
         zlib-dev zlib-static                                          \
     ; apk add --no-cache upx

### Bake the custom BusyBox into another layer.  The intent is that this
### changes only when we change BBXVER.  That will force an update of
### the layers below, but this is a rare occurrence.
ARG BBXVER="1_35_0"
ENV BBXURL "https://github.com/mirror/busybox/tarball/${BBXVER}"
COPY containers/busybox-config /tmp/bbx/.config
ADD $BBXURL /tmp/bbx/src.tar.gz
RUN set -x \
    && tar --strip-components=1 -C bbx -xzf bbx/src.tar.gz            \
    && ( cd bbx && yes "" | make oldconfig && make -j11 )             \
    && if [ -x /usr/bin/upx ] ; then upx -9q bbx/busybox ; fi

### The changeable Fossil layer is the only one in the first stage that
### changes often, so add it last, to make it independent of the others.
###
### $FSLSTB can be either a file or a directory due to a ADD's bizarre
### behavior: it unpacks tarballs when added from a local file but not
### from a URL!   It matters because we default to a URL in case you're
### building outside a Fossil checkout, but when building via the
### container-image target, we can avoid a costly hit on the Fossil
### project's home site by pulling the data from the local repo via the
### "tarball" command.  This is a DVCS, after all!
ARG FSLVER="trunk"
ARG FSLURL="https://fossil-scm.org/home/tarball/src?r=${FSLVER}"



ENV FSLSTB=/tmp/fsl/src.tar.gz
ADD $FSLURL $FSLSTB
RUN set -x \
    && if [ -d $FSLSTB ] ; then mv $FSLSTB/src fsl ;                  \
       else tar -C fsl -xzf fsl/src.tar.gz ; fi                       \
    && m=fsl/src/src/main.mk                                          \
    && grep -v '/skins/[a-ce-z]' $m | sponge $m                       \
    && fsl/src/configure --static CFLAGS='-Os -s' && make -j11        \
    && if [ -x /usr/bin/upx ] ; then upx -9q fossil ; fi


## ---------------------------------------------------------------------
## STAGE 2: Pare that back to the bare essentials.
## ---------------------------------------------------------------------

FROM scratch
WORKDIR /jail
ARG UID=499
ENV PATH "/bin:/jail/bin"

### Lay BusyBox down as the first base layer. Coupled with the host's
### kernel, this is the "OS."
COPY --from=builder /tmp/bbx/busybox /bin/
RUN [ "/bin/busybox", "--install", "/bin" ]

### Set up that base OS for our specific use without tying it to
### anything likely to change often.  So long as the user leaves
### UID alone, this layer will be durable.
RUN set -x                                                             \
    && echo 'root:x:0:0:SysAdmin:/:/bin/nologin' > /etc/passwd         \
    && echo 'root:x:0:root'                      > /etc/group          \
    && addgroup -S -g ${UID} fossil                                    \
    && adduser -S -h `pwd` -g 'Fossil User' -G fossil -u ${UID} fossil \
    && install -d -m 700 -o fossil -g fossil log museum                \
    && install -d -m 755 -o fossil -g fossil dev                       \
    && mknod -m 666 dev/null    c 1 3                                  \
    && mknod -m 444 dev/urandom c 1 9

### Do Fossil-specific things atop those base layers; this will change
### as often as the Fossil build-from-source layer above.
COPY --from=builder /tmp/fossil bin/
RUN set -x                                                             \
    && ln -s /jail/bin/fossil /bin/f                                   \
    && echo -e '#!/bin/sh\nfossil sha1sum "$@"' > /bin/sha1sum         \
    && echo -e '#!/bin/sh\nfossil sha3sum "$@"' > /bin/sha3sum         \
    && echo -e '#!/bin/sh\nfossil sqlite3 --no-repository "$@"' >      \
       /bin/sqlite3                                                    \
    && chmod +x /bin/sha?sum /bin/sqlite3


## ---------------------------------------------------------------------
## STAGE 3: Run!
## ---------------------------------------------------------------------

EXPOSE 8080/tcp
CMD [ \
    "bin/fossil", "server", \
    "--chroot", "/jail",    \
    "--create",             \
    "--jsmode", "bundled",  \
    "--user", "admin",      \
    "museum/repo.fossil"]

#
# This is also why we repeat the reconfig target's command here instead
# of delegating to it with "$(MAKE) reconfig": having children running
# around interfering makes this failure mode even worse.
Makefile: @srcdir@/Makefile.in $(SRCDIR)/main.mk @AUTODEPS@
	@AUTOREMAKE@
	touch @builddir@/Makefile

# Container stuff
SRCTB := src-@FOSSIL_CI_PFX@.tar.gz
container-image:
	$(APPNAME) tarball --name src @FOSSIL_CI_PFX@ $(SRCTB)
	docker build \
		--tag fossil:@FOSSIL_CI_PFX@ \
		--build-arg FSLURL=$(SRCTB) \
		$(DBFLAGS) @srcdir@
	rm -f $(SRCTB)

container-run: container-image
	docker run \
		--name fossil-@FOSSIL_CI_PFX@ \
		--cap-drop AUDIT_WRITE \
		--cap-drop CHOWN \
		--cap-drop FSETID \
		--cap-drop KILL \
		--cap-drop MKNOD \
		--cap-drop NET_BIND_SERVICE \
		--cap-drop NET_RAW \
		--cap-drop SETFCAP \
		--cap-drop SETPCAP \
		--detach --publish 8080:8080 \
		$(DRFLAGS) fossil:@FOSSIL_CI_PFX@
	docker container logs fossil-@FOSSIL_CI_PFX@

2.20

# Check for zlib, using the given location if specified
set zlibpath [opt-val with-zlib]
if {$zlibpath eq "tree"} {
  set zlibdir [file dirname $autosetup(dir)]/compat/zlib
  if {![file isdirectory $zlibdir]} {
    user-error "The zlib in source tree directory does not exist"
  } elseif { ([llength [glob -nocomplain -directory $zlibdir libz*]] == 0) } {
    user-error "With --with-zlib=tree, $zlibdir must be configured and built first."
  }
  cc-with [list -cflags "-I$zlibdir -L$zlibdir"]
  define-append EXTRA_CFLAGS -I$zlibdir
  define-append LIBS $zlibdir/libz.a
  set ::zlib_lib $zlibdir/libz.a
  msg-result "Using zlib in source tree"
} else {

  define EMCC_WRAPPER $::autosetup(dir)/../tools/emcc.sh
  make-template tools/emcc.sh.in
  catch {exec chmod u+x tools/emcc.sh}
} else {
  define EMCC_WRAPPER ""
  catch {exec rm -f tools/emcc.sh}
}

# Tag container builds with a prefix of the checkin ID of the version
# of Fossil each one contains.  This not only allows multiple images
# to coexist and multiple containers to be created unamgiguosly from
# them, it also changes the URL we fetch the source tarball from, so
# repeated builds of a given version generate and fetch the source
# tarball once only, keeping it in the local Docker/Podman cache.
set ci [readfile "$::autosetup(srcdir)/manifest.uuid"]
define FOSSIL_CI_PFX [string range $ci 0 11]

make-template Makefile.in
make-config-header autoconfig.h -auto {USE_* FOSSIL_*}

cmake_minimum_required(VERSION 2.4.4)
set(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS ON)

project(zlib C)

set(VERSION "1.2.12")

option(ASM686 "Enable building i686 assembly implementation")
option(AMD64 "Enable building amd64 assembly implementation")

set(INSTALL_BIN_DIR "${CMAKE_INSTALL_PREFIX}/bin" CACHE PATH "Installation directory for executables")
set(INSTALL_LIB_DIR "${CMAKE_INSTALL_PREFIX}/lib" CACHE PATH "Installation directory for libraries")
set(INSTALL_INC_DIR "${CMAKE_INSTALL_PREFIX}/include" CACHE PATH "Installation directory for headers")

                ChangeLog file for zlib

Changes in 1.2.12 (27 Mar 2022)
- Cygwin does not have _wopen(), so do not create gzopen_w() there
- Permit a deflateParams() parameter change as soon as possible
- Limit hash table inserts after switch from stored deflate
- Fix bug when window full in deflate_stored()
- Fix CLEAR_HASH macro to be usable as a single statement
- Avoid a conversion error in gzseek when off_t type too small
- Have Makefile return non-zero error code on test failure
- Avoid some conversion warnings in gzread.c and gzwrite.c
- Update use of errno for newer Windows CE versions
- Small speedup to inflate [psumbera]
- Return an error if the gzputs string length can't fit in an int
- Add address checking in clang to -w option of configure
- Don't compute check value for raw inflate if asked to validate
- Handle case where inflateSync used when header never processed
- Avoid the use of ptrdiff_t
- Avoid an undefined behavior of memcpy() in gzappend()
- Avoid undefined behaviors of memcpy() in gz*printf()
- Avoid an undefined behavior of memcpy() in _tr_stored_block()
- Make the names in functions declarations identical to definitions
- Remove old assembler code in which bugs have manifested
- Fix deflateEnd() to not report an error at start of raw deflate
- Add legal disclaimer to README
- Emphasize the need to continue decompressing gzip members
- Correct the initialization requirements for deflateInit2()
- Fix a bug that can crash deflate on some input when using Z_FIXED
- Assure that the number of bits for deflatePrime() is valid
- Use a structure to make globals in enough.c evident
- Use a macro for the printf format of big_t in enough.c
- Clean up code style in enough.c, update version
- Use inline function instead of macro for index in enough.c
- Clarify that prefix codes are counted in enough.c
- Show all the codes for the maximum tables size in enough.c
- Add gznorm.c example, which normalizes gzip files
- Fix the zran.c example to work on a multiple-member gzip file
- Add tables for crc32_combine(), to speed it up by a factor of 200
- Add crc32_combine_gen() and crc32_combine_op() for fast combines
- Speed up software CRC-32 computation by a factor of 1.5 to 3
- Use atomic test and set, if available, for dynamic CRC tables
- Don't bother computing check value after successful inflateSync()
- Correct comment in crc32.c
- Add use of the ARMv8 crc32 instructions when requested
- Use ARM crc32 instructions if the ARM architecture has them
- Explicitly note that the 32-bit check values are 32 bits
- Avoid adding empty gzip member after gzflush with Z_FINISH
- Fix memory leak on error in gzlog.c
- Fix error in comment on the polynomial representation of a byte
- Clarify gz* function interfaces, referring to parameter names
- Change macro name in inflate.c to avoid collision in VxWorks
- Correct typo in blast.c
- Improve portability of contrib/minizip
- Fix indentation in minizip's zip.c
- Replace black/white with allow/block. (theresa-m)
- minizip warning fix if MAXU32 already defined. (gvollant)
- Fix unztell64() in minizip to work past 4GB. (Daniël Hörchner)
- Clean up minizip to reduce warnings for testing
- Add fallthrough comments for gcc
- Eliminate use of ULL constants
- Separate out address sanitizing from warnings in configure
- Remove destructive aspects of make distclean
- Check for cc masquerading as gcc or clang in configure
- Fix crc32.c to compile local functions only if used

Changes in 1.2.11 (15 Jan 2017)
- Fix deflate stored bug when pulling last block from window
- Permit immediate deflateParams changes before any deflate input

Changes in 1.2.10 (2 Jan 2017)
- Avoid warnings on snprintf() return value
- Fix bug in deflate_stored() for zero-length input

- Use zlib header window size if windowBits is 0 in inflateInit2()
- Remove compressBound() call in deflate.c to avoid linking compress.o
- Replace use of errno in gz* with functions, support WinCE [Alves]
- Provide alternative to perror() in minigzip.c for WinCE [Alves]
- Don't use _vsnprintf on later versions of MSVC [Lowman]
- Add CMake build script and input file [Lowman]
- Update contrib/minizip to 1.1 [Svensson, Vollant]
- Moved nintendods directory from contrib to root
- Replace gzio.c with a new set of routines with the same functionality
- Add gzbuffer(), gzoffset(), gzclose_r(), gzclose_w() as part of above
- Update contrib/minizip to 1.1b
- Change gzeof() to return 0 on error instead of -1 to agree with zlib.h

Changes in 1.2.3.4 (21 Dec 2009)
- Use old school .SUFFIXES in Makefile.in for FreeBSD compatibility

- Add cast in trees.c t avoid a warning [Oberhumer]
- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer]
- Update make_vms.com [Zinser]
- Initialize state->write in inflateReset() since copied in inflate_fast()
- Be more strict on incomplete code sets in inflate_table() and increase
  ENOUGH and MAXD -- this repairs a possible security vulnerability for
  invalid inflate input.  Thanks to Tavis Ormandy and Markus Oberhumer for
  discovering the vulnerability and providing test cases
- Add ia64 support to configure for HP-UX [Smith]
- Add error return to gzread() for format or i/o error [Levin]
- Use malloc.h for OS/2 [Necasek]

Changes in 1.2.2.3 (27 May 2005)
- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile
- Typecast fread() return values in gzio.c [Vollant]

- Increase sprintf() buffer size in gzdopen() to allow for large numbers
- Add INFLATE_STRICT to check distances against zlib header
- Improve WinCE errno handling and comments [Chang]
- Remove comment about no gzip header processing in FAQ
- Add Z_FIXED strategy option to deflateInit2() to force fixed trees
- Add updated make_vms.com [Coghlan], update README
- Create a new "examples" directory, move gzappend.c there, add zpipe.c,
  fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html
- Add FAQ entry and comments in deflate.c on uninitialized memory access
- Add Solaris 9 make options in configure [Gilbert]
- Allow strerror() usage in gzio.c for STDC
- Fix DecompressBuf in contrib/delphi/ZLib.pas [ManChesTer]
- Update contrib/masmx86/inffas32.asm and gvmat32.asm [Vollant]
- Use z_off_t for adler32_combine() and crc32_combine() lengths
- Make adler32() much faster for small len

Changes in 1.2.1.1 (9 January 2004)
- Update email address in README
- Several FAQ updates
- Fix a big fat bug in inftrees.c that prevented decoding valid
  dynamic blocks with only literals and no distance codes --
  Thanks to "Hot Emu" for the bug report and sample file
- Add a note to puff.c on no distance codes case

Changes in 1.2.1 (17 November 2003)
- Remove a tab in contrib/gzappend/gzappend.c
- Update some interfaces in contrib for new zlib functions
- Update zlib version number in some contrib entries
- Add Windows CE definition for ptrdiff_t in zutil.h [Mai, Truta]
- Support shared libraries on Hurd and KFreeBSD [Brown]

    - Note permitted values of flush parameter of inflate()
- Add some FAQs (and even answers) to the FAQ
- Add contrib/inflate86/ for x86 faster inflate
- Add contrib/blast/ for PKWare Data Compression Library decompression
- Add contrib/puff/ simple inflate for deflate format description

Changes in 1.1.4 (11 March 2002)
- ZFREE was repeated on same allocation on some error conditions
  This creates a security problem described in
  http://www.zlib.org/advisory-2002-03-11.txt
- Returned incorrect error (Z_MEM_ERROR) on some invalid data
- Avoid accesses before window for invalid distances with inflate window
  less than 32K
- force windowBits > 8 to avoid a bug in the encoder for a window size
  of 256 bytes. (A complete fix will be available in 1.1.5)

Changes in 1.1.3 (9 July 1998)
- fix "an inflate input buffer bug that shows up on rare but persistent
  occasions" (Mark)
- fix gzread and gztell for concatenated .gz files (Didier Le Botlan)
- fix gzseek(..., SEEK_SET) in write mode
- fix crc check after a gzeek (Frank Faubert)

- move Makefile.sas to amiga/Makefile.sas

Changes in 1.1.1 (27 Feb 98)
- fix macros _tr_tally_* in deflate.h for debug mode  (Glenn Randers-Pehrson)
- remove block truncation heuristic which had very marginal effect for zlib
  (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the
  compression ratio on some files. This also allows inlining _tr_tally for
  matches in deflate_slow
- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier)

Changes in 1.1.0 (24 Feb 98)
- do not return STREAM_END prematurely in inflate (John Bowler)
- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler)
- compile with -DFASTEST to get compression code optimized for speed only
- in minigzip, try mmap'ing the input file first (Miguel Albrecht)

Changes in 1.0.8 (27 Jan 1998)
- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant)
- fix gzgetc and gzputc for big endian systems (Markus Oberhumer)
- added compress2() to allow setting the compression level
- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong)
- use constant arrays for the static trees in trees.c instead of computing
  them at run time (thanks to Ken Raeburn for this suggestion). To create
  trees.h, compile with GEN_TREES_H and run "make test"
- check return code of example in "make test" and display result
- pass minigzip command line options to file_compress
- simplifying code of inflateSync to avoid gcc 2.8 bug

- support CC="gcc -Wall" in configure -s (QingLong)
- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn)
- fix test for shared library support to avoid compiler warnings

- add inflateSyncPoint in zconf.h
- fix list of exported functions in nt/zlib.dnt and mdsos/zlib.def

Changes in 1.0.6 (19 Jan 1998)
- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
  gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
- Fix a deflate bug occurring only with compression level 0 (thanks to
  Andy Buckler for finding this one)
- In minigzip, pass transparently also the first byte for .Z files
- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()
- check Z_FINISH in inflate (thanks to Marc Schluper)
- Implement deflateCopy (thanks to Adam Costello)
- make static libraries by default in configure, add --shared option
- move MSDOS or Windows specific files to directory msdos
- suppress the notion of partial flush to simplify the interface
  (but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4)
- suppress history buffer provided by application to simplify the interface
  (this feature was not implemented anyway in 1.0.4)
- next_in and avail_in must be initialized before calling inflateInit or
  inflateInit2
- add EXPORT in all exported functions (for Windows DLL)
- added Makefile.nt (thanks to Stephen Williams)
- added the unsupported "contrib" directory:
   contrib/asm386/ by Gilles Vollant <info@winimage.com>
        386 asm code replacing longest_match()
   contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
        A C++ I/O streams interface to the zlib gz* functions
   contrib/iostream2/  by Tyge Løvset <Tyge.Lovset@cmr.no>
        Another C++ I/O streams interface
   contrib/untgz/  by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
        A very simple tar.gz file extractor using zlib
   contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
        How to use compress(), uncompress() and the gz* functions from VB
- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression
  level) in minigzip (thanks to Tom Lane)

- use const for rommable constants in deflate
- added test for gzseek and gztell in example.c
- add undocumented function inflateSyncPoint() (hack for Paul Mackerras)
- add undocumented function zError to convert error code to string
  (for Tim Smithers)
- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code
- Use default memcpy for Symantec MSDOS compiler
- Add EXPORT keyword for check_func (needed for Windows DLL)
- add current directory to LD_LIBRARY_PATH for "make test"
- create also a link for libz.so.1
- added support for FUJITSU UXP/DS (thanks to Toshiaki Nomura)
- use $(SHAREDLIB) instead of libz.so in Makefile.in (for HPUX)
- added -soname for Linux in configure (Chun-Chung Chen,
- assign numbers to the exported functions in zlib.def (for Windows DLL)
- add advice in zlib.h for best usage of deflateSetDictionary
- work around compiler bug on Atari (cast Z_NULL in call of s->checkfn)
- allow compilation with ANSI keywords only enabled for TurboC in large model
- avoid "versionString"[0] (Borland bug)
- add NEED_DUMMY_RETURN for Borland
- use variable z_verbose for tracing in debug mode (L. Peter Deutsch)
- allow compilation with CC
- defined STDC for OS/2 (David Charlap)
- limit external names to 8 chars for MVS (Thomas Lund)
- in minigzip.c, use static buffers only for 16-bit systems
- fix suffix check for "minigzip -d foo.gz"
- do not return an error for the 2nd of two consecutive gzflush() (Felix Lee)
- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau)
- added makelcc.bat for lcc-win32 (Tom St Denis)
- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe)
- Avoid expanded $Id$. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion
- check for unistd.h in configure (for off_t)
- remove useless check parameter in inflate_blocks_free
- avoid useless assignment of s->check to itself in inflate_blocks_new
- do not flush twice in gzclose (thanks to Ken Raeburn)
- rename FOPEN as F_OPEN to avoid clash with /usr/include/sys/file.h
- use NO_ERRNO_H instead of enumeration of operating systems with errno.h
- work around buggy fclose on pipes for HP/UX
- support zlib DLL with BORLAND C++ 5.0 (thanks to Glenn Randers-Pehrson)
- fix configure if CC is already equal to gcc

Changes in 1.0.5 (3 Jan 98)
- Fix inflate to terminate gracefully when fed corrupted or invalid data
- Use const for rommable constants in inflate
- Eliminate memory leaks on error conditions in inflate
- Removed some vestigial code in inflate
- Update web address in README

Changes in 1.0.4 (24 Jul 96)
- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF
  bit, so the decompressor could decompress all the correct data but went
  on to attempt decompressing extra garbage data. This affected minigzip too
- zlibVersion and gzerror return const char* (needed for DLL)
- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno)
- use z_error only for DEBUG (avoid problem with DLLs)

Changes in 1.0.3 (2 Jul 96)
- use z_streamp instead of z_stream *, which is now a far pointer in MSDOS
  small and medium models; this makes the library incompatible with previous

- updated Makefile.dj2
- added algorithm.doc

Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion]
- fix array overlay in deflate.c which sometimes caused bad compressed data
- fix inflate bug with empty stored block
- fix MSDOS medium model which was broken in 0.99
- fix deflateParams() which could generate bad compressed data
- Bytef is define'd instead of typedef'ed (work around Borland bug)
- added an INDEX file
- new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32),
  Watcom (Makefile.wat), Amiga SAS/C (Makefile.sas)
- speed up adler32 for modern machines without auto-increment
- added -ansi for IRIX in configure
- static_init_done in trees.c is an int
- define unlink as delete for VMS
- fix configure for QNX
- add configure branch for SCO and HPUX
- avoid many warnings (unused variables, dead assignments, etc...)
- no fdopen for BeOS
- fix the Watcom fix for 32 bit mode (define FAR as empty)
- removed redefinition of Byte for MKWERKS
- work around an MWKERKS bug (incorrect merge of all .h files)

Changes in 0.99 (27 Jan 96)
- allow preset dictionary shared between compressor and decompressor
- allow compression level 0 (no compression)
- add deflateParams in zlib.h: allow dynamic change of compression level
  and compression strategy
- test large buffers and deflateParams in example.c
- add optional "configure" to build zlib as a shared library
- suppress Makefile.qnx, use configure instead
- fixed deflate for 64-bit systems (detected on Cray)
- fixed inflate_blocks for 64-bit systems (detected on Alpha)
- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2)
- always return Z_BUF_ERROR when deflate() has nothing to do

- check for WIN32 in zconf.h and zutil.c (avoid farmalloc in 32-bit mode)
- fix typo in Make_vms.com (f$trnlnm -> f$getsyi)
- in fcalloc, normalize pointer if size > 65520 bytes
- don't use special fcalloc for 32 bit Borland C++
- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc...
- use Z_BINARY instead of BINARY
- document that gzclose after gzdopen will close the file
- allow "a" as mode in gzopen
- fix error checking in gzread
- allow skipping .gz extra-field on pipes
- added reference to Perl interface in README
- put the crc table in FAR data (I dislike more and more the medium model :)
- added get_crc_table
- added a dimension to all arrays (Borland C can't count)
- workaround Borland C bug in declaration of inflate_codes_new & inflate_fast
- guard against multiple inclusion of *.h (for precompiled header on Mac)
- Watcom C pretends to be Microsoft C small model even in 32 bit mode
- don't use unsized arrays to avoid silly warnings by Visual C++:
     warning C4746: 'inflate_mask' : unsized array treated as  '__far'
     (what's wrong with far data in far model?)
- define enum out of inflate_blocks_state to allow compilation with C++

Changes in 0.95 (16 Aug 95)
- fix MSDOS small and medium model (now easier to adapt to any compiler)
- inlined send_bits
- fix the final (:-) bug for deflate with flush (output was correct but
  not completely flushed in rare occasions)
- default window size is same for compression and decompression
  (it's now sufficient to set MAX_WBITS in zconf.h)
- voidp -> voidpf and voidnp -> voidp (for consistency with other
  typedefs and because voidnp was not near in large model)

Changes in 0.94 (13 Aug 95)
- support MSDOS medium model
- fix deflate with flush (could sometimes generate bad output)
- fix deflateReset (zlib header was incorrectly suppressed)
- added support for VMS
- allow a compression level in gzopen()
- gzflush now calls fflush
- For deflate with flush, flush even if no more input is provided
- rename libgz.a as libz.a
- avoid complex expression in infcodes.c triggering Turbo C bug
- work around a problem with gcc on Alpha (in INSERT_STRING)
- don't use inline functions (problem with some gcc versions)
- allow renaming of Byte, uInt, etc... with #define
- avoid warning about (unused) pointer before start of array in deflate.c
- avoid various warnings in gzio.c, example.c, infblock.c, adler32.c, zutil.c
- avoid reserved word 'new' in trees.c

Changes in 0.93 (25 June 95)
- temporarily disable inline functions
- make deflate deterministic
- give enough lookahead for PARTIAL_FLUSH
- Set binary mode for stdin/stdout in minigzip.c for OS/2
- don't even use signed char in inflate (not portable enough)
- fix inflate memory leak for segmented architectures

Changes in 0.92 (3 May 95)
- don't assume that char is signed (problem on SGI)
- Clear bit buffer when starting a stored block
- no memcpy on Pyramid
- suppressed inftest.c
- optimized fill_window, put longest_match inline for gcc
- optimized inflate on stored blocks
- untabify all sources to simplify patches

Changes in 0.91 (2 May 95)
- Default MEM_LEVEL is 8 (not 9 for Unix) as documented in zlib.h
- Document the memory requirements in zconf.h
- added "make install"
- fix sync search logic in inflateSync
- deflate(Z_FULL_FLUSH) now works even if output buffer too short
- after inflateSync, don't scare people with just "lo world"
- added support for DJGPP

Changes in 0.9 (1 May 95)
- don't assume that zalloc clears the allocated memory (the TurboC bug
  was Mark's bug after all :)
- let again gzread copy uncompressed data unchanged (was working in 0.71)
- deflate(Z_FULL_FLUSH), inflateReset and inflateSync are now fully implemented
- added a test of inflateSync in example.c
- moved MAX_WBITS to zconf.h because users might want to change that
- document explicitly that zalloc(64K) on MSDOS must return a normalized
  pointer (zero offset)
- added Makefiles for Microsoft C, Turbo C, Borland C++
- faster crc32()

Changes in 0.8 (29 April 95)
- added fast inflate (inffast.c)
- deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this
  is incompatible with previous versions of zlib which returned Z_OK
- work around a TurboC compiler bug (bad code for b << 0, see infutil.h)
  (actually that was not a compiler bug, see 0.81 above)
- gzread no longer reads one extra byte in certain cases
- In gzio destroy(), don't reference a freed structure
- avoid many warnings for MSDOS
- avoid the ERROR symbol which is used by MS Windows

Changes in 0.71 (14 April 95)
- Fixed more MSDOS compilation problems :( There is still a bug with
  TurboC large model

Changes in 0.7 (14 April 95)
- Added full inflate support
- Simplified the crc32() interface. The pre- and post-conditioning
  (one's complement) is now done inside crc32(). WARNING: this is
  incompatible with previous versions; see zlib.h for the new usage

Changes in 0.61 (12 April 95)
- workaround for a bug in TurboC. example and minigzip now work on MSDOS

Changes in 0.6 (11 April 95)
- added minigzip.c
- added gzdopen to reopen a file descriptor as gzFile
- added transparent reading of non-gziped files in gzread
- fixed bug in gzread (don't read crc as data)
- fixed bug in destroy (gzio.c) (don't return Z_STREAM_END for gzclose)
- don't allocate big arrays in the stack (for MSDOS)
- fix some MSDOS compilation problems

Changes in 0.5:
- do real compression in deflate.c. Z_PARTIAL_FLUSH is supported but
  not yet Z_FULL_FLUSH
- support decompression but only in a single step (forced Z_FINISH)
- added opaque object for zalloc and zfree
- added deflateReset and inflateReset
- added a variable zlib_version for consistency checking
- renamed the 'filter' parameter of deflateInit2 as 'strategy'
  Added Z_FILTERED and Z_HUFFMAN_ONLY constants

Changes in 0.4:
- avoid "zip" everywhere, use zlib instead of ziplib
- suppress Z_BLOCK_FLUSH, interpret Z_PARTIAL_FLUSH as block flush
  if compression method == 8
- added adler32 and crc32
- renamed deflateOptions as deflateInit2, call one or the other but not both
- added the method parameter for deflateInit2
- added inflateInit2
- simplied considerably deflateInit and inflateInit by not supporting
  user-provided history buffer. This is supported only in deflateInit2
  and inflateInit2

Changes in 0.3:
- prefix all macro names with Z_
- use Z_FINISH instead of deflateEnd to finish compression
- added Z_HUFFMAN_ONLY
- added gzerror()

# Makefile for zlib
# Copyright (C) 1995-2017 Jean-loup Gailly, Mark Adler
# For conditions of distribution and use, see copyright notice in zlib.h

# To compile and test, type:
#    ./configure; make test
# Normally configure builds both a static and a shared library.
# If you want to build just a static library, use: ./configure --static

# To use the asm code, type:
#    cp contrib/asm?86/match.S ./match.S
#    make LOC=-DASMV OBJA=match.o

# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
#    make install
# To install in $HOME instead of /usr/local, use:
#    make install prefix=$HOME

CC=gcc

CFLAGS=-O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN
#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
#CFLAGS=-g -DZLIB_DEBUG
#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
#           -Wstrict-prototypes -Wmissing-prototypes

SFLAGS=-O3 -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN
LDFLAGS=
TEST_LDFLAGS=-L. libz.a
LDSHARED=gcc
CPP=gcc -E

STATICLIB=libz.a
SHAREDLIB=
SHAREDLIBV=
SHAREDLIBM=
LIBS=$(STATICLIB) $(SHAREDLIBV)

AR=ar
ARFLAGS=rc
RANLIB=ranlib
LDCONFIG=ldconfig
LDSHAREDLIBC=-lc
TAR=tar
SHELL=/bin/sh
EXE=

prefix =/usr/local
exec_prefix =${prefix}
libdir =${exec_prefix}/lib
sharedlibdir =${libdir}
includedir =${prefix}/include
mandir =${prefix}/share/man
man3dir = ${mandir}/man3
pkgconfigdir = ${libdir}/pkgconfig
SRCDIR=
ZINC=
ZINCOUT=-I.

OBJZ = adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o
OBJG = compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o
OBJC = $(OBJZ) $(OBJG)

PIC_OBJZ = adler32.lo crc32.lo deflate.lo infback.lo inffast.lo inflate.lo inftrees.lo trees.lo zutil.lo
PIC_OBJG = compress.lo uncompr.lo gzclose.lo gzlib.lo gzread.lo gzwrite.lo
PIC_OBJC = $(PIC_OBJZ) $(PIC_OBJG)

# to use the asm code: make OBJA=match.o, PIC_OBJA=match.lo
OBJA =
PIC_OBJA =

OBJS = $(OBJC) $(OBJA)

PIC_OBJS = $(PIC_OBJC) $(PIC_OBJA)

all: static all64

static: example$(EXE) minigzip$(EXE)

shared: examplesh$(EXE) minigzipsh$(EXE)

all64: example64$(EXE) minigzip64$(EXE)

check: test

test: all teststatic test64

teststatic: static
	@TMPST=tmpst_$$; \
	if echo hello world | ./minigzip | ./minigzip -d && ./example $$TMPST ; then \
	  echo '		*** zlib test OK ***'; \
	else \
	  echo '		*** zlib test FAILED ***'; false; \
	fi
	@rm -f tmpst_$$

testshared: shared
	@LD_LIBRARY_PATH=`pwd`:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
	LD_LIBRARYN32_PATH=`pwd`:$(LD_LIBRARYN32_PATH) ; export LD_LIBRARYN32_PATH; \
	DYLD_LIBRARY_PATH=`pwd`:$(DYLD_LIBRARY_PATH) ; export DYLD_LIBRARY_PATH; \
	SHLIB_PATH=`pwd`:$(SHLIB_PATH) ; export SHLIB_PATH; \
	TMPSH=tmpsh_$$; \
	if echo hello world | ./minigzipsh | ./minigzipsh -d && ./examplesh $$TMPSH; then \
	  echo '		*** zlib shared test OK ***'; \
	else \
	  echo '		*** zlib shared test FAILED ***'; false; \
	fi
	@rm -f tmpsh_$$

test64: all64
	@TMP64=tmp64_$$; \
	if echo hello world | ./minigzip64 | ./minigzip64 -d && ./example64 $$TMP64; then \
	  echo '		*** zlib 64-bit test OK ***'; \
	else \
	  echo '		*** zlib 64-bit test FAILED ***'; false; \
	fi
	@rm -f tmp64_$$

infcover.o: $(SRCDIR)test/infcover.c $(SRCDIR)zlib.h zconf.h
	$(CC) $(CFLAGS) $(ZINCOUT) -c -o $@ $(SRCDIR)test/infcover.c

infcover: infcover.o libz.a
	$(CC) $(CFLAGS) -o $@ infcover.o libz.a

cover: infcover
	rm -f *.gcda
	./infcover
	gcov inf*.c

libz.a: $(OBJS)
	$(AR) $(ARFLAGS) $@ $(OBJS)
	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1

match.o: match.S
	$(CPP) match.S > _match.s
	$(CC) -c _match.s
	mv _match.o match.o
	rm -f _match.s

match.lo: match.S
	$(CPP) match.S > _match.s
	$(CC) -c -fPIC _match.s
	mv _match.o match.lo
	rm -f _match.s

example.o: $(SRCDIR)test/example.c $(SRCDIR)zlib.h zconf.h
	$(CC) $(CFLAGS) $(ZINCOUT) -c -o $@ $(SRCDIR)test/example.c

minigzip.o: $(SRCDIR)test/minigzip.c $(SRCDIR)zlib.h zconf.h
	$(CC) $(CFLAGS) $(ZINCOUT) -c -o $@ $(SRCDIR)test/minigzip.c

example64.o: $(SRCDIR)test/example.c $(SRCDIR)zlib.h zconf.h
	$(CC) $(CFLAGS) $(ZINCOUT) -D_FILE_OFFSET_BITS=64 -c -o $@ $(SRCDIR)test/example.c

minigzip64.o: $(SRCDIR)test/minigzip.c $(SRCDIR)zlib.h zconf.h
	$(CC) $(CFLAGS) $(ZINCOUT) -D_FILE_OFFSET_BITS=64 -c -o $@ $(SRCDIR)test/minigzip.c


adler32.o: $(SRCDIR)adler32.c
	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)adler32.c

crc32.o: $(SRCDIR)crc32.c
	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)crc32.c

deflate.o: $(SRCDIR)deflate.c
	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)deflate.c

infback.o: $(SRCDIR)infback.c
	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)infback.c

inffast.o: $(SRCDIR)inffast.c
	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)inffast.c

inflate.o: $(SRCDIR)inflate.c
	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)inflate.c

inftrees.o: $(SRCDIR)inftrees.c
	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)inftrees.c

trees.o: $(SRCDIR)trees.c
	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)trees.c

zutil.o: $(SRCDIR)zutil.c
	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)zutil.c

compress.o: $(SRCDIR)compress.c
	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)compress.c

uncompr.o: $(SRCDIR)uncompr.c
	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)uncompr.c

gzclose.o: $(SRCDIR)gzclose.c
	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)gzclose.c

gzlib.o: $(SRCDIR)gzlib.c
	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)gzlib.c

gzread.o: $(SRCDIR)gzread.c
	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)gzread.c

gzwrite.o: $(SRCDIR)gzwrite.c
	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)gzwrite.c


adler32.lo: $(SRCDIR)adler32.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/adler32.o $(SRCDIR)adler32.c
	-@mv objs/adler32.o $@

crc32.lo: $(SRCDIR)crc32.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/crc32.o $(SRCDIR)crc32.c
	-@mv objs/crc32.o $@

deflate.lo: $(SRCDIR)deflate.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/deflate.o $(SRCDIR)deflate.c
	-@mv objs/deflate.o $@

infback.lo: $(SRCDIR)infback.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/infback.o $(SRCDIR)infback.c
	-@mv objs/infback.o $@

inffast.lo: $(SRCDIR)inffast.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/inffast.o $(SRCDIR)inffast.c
	-@mv objs/inffast.o $@

inflate.lo: $(SRCDIR)inflate.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/inflate.o $(SRCDIR)inflate.c
	-@mv objs/inflate.o $@

inftrees.lo: $(SRCDIR)inftrees.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/inftrees.o $(SRCDIR)inftrees.c
	-@mv objs/inftrees.o $@

trees.lo: $(SRCDIR)trees.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/trees.o $(SRCDIR)trees.c
	-@mv objs/trees.o $@

zutil.lo: $(SRCDIR)zutil.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/zutil.o $(SRCDIR)zutil.c
	-@mv objs/zutil.o $@

compress.lo: $(SRCDIR)compress.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/compress.o $(SRCDIR)compress.c
	-@mv objs/compress.o $@

uncompr.lo: $(SRCDIR)uncompr.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/uncompr.o $(SRCDIR)uncompr.c
	-@mv objs/uncompr.o $@

gzclose.lo: $(SRCDIR)gzclose.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/gzclose.o $(SRCDIR)gzclose.c
	-@mv objs/gzclose.o $@

gzlib.lo: $(SRCDIR)gzlib.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/gzlib.o $(SRCDIR)gzlib.c
	-@mv objs/gzlib.o $@

gzread.lo: $(SRCDIR)gzread.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/gzread.o $(SRCDIR)gzread.c
	-@mv objs/gzread.o $@

gzwrite.lo: $(SRCDIR)gzwrite.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/gzwrite.o $(SRCDIR)gzwrite.c
	-@mv objs/gzwrite.o $@


placebo $(SHAREDLIBV): $(PIC_OBJS) libz.a
	$(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) $(LDSHAREDLIBC) $(LDFLAGS)
	rm -f $(SHAREDLIB) $(SHAREDLIBM)
	ln -s $@ $(SHAREDLIB)
	ln -s $@ $(SHAREDLIBM)
	-@rmdir objs

example$(EXE): example.o $(STATICLIB)
	$(CC) $(CFLAGS) -o $@ example.o $(TEST_LDFLAGS)

minigzip$(EXE): minigzip.o $(STATICLIB)
	$(CC) $(CFLAGS) -o $@ minigzip.o $(TEST_LDFLAGS)

examplesh$(EXE): example.o $(SHAREDLIBV)
	$(CC) $(CFLAGS) -o $@ example.o -L. $(SHAREDLIBV)

minigzipsh$(EXE): minigzip.o $(SHAREDLIBV)
	$(CC) $(CFLAGS) -o $@ minigzip.o -L. $(SHAREDLIBV)

example64$(EXE): example64.o $(STATICLIB)
	$(CC) $(CFLAGS) -o $@ example64.o $(TEST_LDFLAGS)

minigzip64$(EXE): minigzip64.o $(STATICLIB)
	$(CC) $(CFLAGS) -o $@ minigzip64.o $(TEST_LDFLAGS)

install-libs: $(LIBS)
	-@if [ ! -d $(DESTDIR)$(exec_prefix)  ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi
	-@if [ ! -d $(DESTDIR)$(libdir)       ]; then mkdir -p $(DESTDIR)$(libdir); fi
	-@if [ ! -d $(DESTDIR)$(sharedlibdir) ]; then mkdir -p $(DESTDIR)$(sharedlibdir); fi
	-@if [ ! -d $(DESTDIR)$(man3dir)      ]; then mkdir -p $(DESTDIR)$(man3dir); fi
	-@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi
	rm -f $(DESTDIR)$(libdir)/$(STATICLIB)
	cp $(STATICLIB) $(DESTDIR)$(libdir)
	chmod 644 $(DESTDIR)$(libdir)/$(STATICLIB)
	-@($(RANLIB) $(DESTDIR)$(libdir)/libz.a || true) >/dev/null 2>&1
	-@if test -n "$(SHAREDLIBV)"; then \
	  rm -f $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV); \
	  cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir); \
	  echo "cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)"; \
	  chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV); \
	  echo "chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV)"; \
	  rm -f $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
	  ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB); \
	  ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
	  ($(LDCONFIG) || true)  >/dev/null 2>&1; \
	fi
	rm -f $(DESTDIR)$(man3dir)/zlib.3
	cp $(SRCDIR)zlib.3 $(DESTDIR)$(man3dir)
	chmod 644 $(DESTDIR)$(man3dir)/zlib.3
	rm -f $(DESTDIR)$(pkgconfigdir)/zlib.pc
	cp zlib.pc $(DESTDIR)$(pkgconfigdir)
	chmod 644 $(DESTDIR)$(pkgconfigdir)/zlib.pc
# The ranlib in install is needed on NeXTSTEP which checks file times
# ldconfig is for Linux

install: install-libs
	-@if [ ! -d $(DESTDIR)$(includedir)   ]; then mkdir -p $(DESTDIR)$(includedir); fi
	rm -f $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h
	cp $(SRCDIR)zlib.h zconf.h $(DESTDIR)$(includedir)
	chmod 644 $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h

uninstall:
	cd $(DESTDIR)$(includedir) && rm -f zlib.h zconf.h
	cd $(DESTDIR)$(libdir) && rm -f libz.a; \
	if test -n "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \
	  rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
	fi
	cd $(DESTDIR)$(man3dir) && rm -f zlib.3
	cd $(DESTDIR)$(pkgconfigdir) && rm -f zlib.pc

docs: zlib.3.pdf

zlib.3.pdf: $(SRCDIR)zlib.3
	groff -mandoc -f H -T ps $(SRCDIR)zlib.3 | ps2pdf - $@

zconf.h.cmakein: $(SRCDIR)zconf.h.in
	-@ TEMPFILE=zconfh_$$; \
	echo "/#define ZCONF_H/ a\\\\\n#cmakedefine Z_PREFIX\\\\\n#cmakedefine Z_HAVE_UNISTD_H\n" >> $$TEMPFILE &&\
	sed -f $$TEMPFILE $(SRCDIR)zconf.h.in > $@ &&\
	touch -r $(SRCDIR)zconf.h.in $@ &&\
	rm $$TEMPFILE

zconf: $(SRCDIR)zconf.h.in
	cp -p $(SRCDIR)zconf.h.in zconf.h

mostlyclean: clean
clean:
	rm -f *.o *.lo *~ \
	   example$(EXE) minigzip$(EXE) examplesh$(EXE) minigzipsh$(EXE) \
	   example64$(EXE) minigzip64$(EXE) \
	   infcover \
	   libz.* foo.gz so_locations \
	   _match.s maketree contrib/infback9/*.o
	rm -rf objs
	rm -f *.gcda *.gcno *.gcov
	rm -f contrib/infback9/*.gcda contrib/infback9/*.gcno contrib/infback9/*.gcov

maintainer-clean: distclean
distclean: clean zconf zconf.h.cmakein
	rm -f Makefile zlib.pc configure.log
	-@rm -f .DS_Store
	@if [ -f Makefile.in ]; then \
	printf 'all:\n\t-@echo "Please use ./configure first.  Thank you."\n' > Makefile ; \
	printf '\ndistclean:\n\tmake -f Makefile.in distclean\n' >> Makefile ; \
	touch -r $(SRCDIR)Makefile.in Makefile ; fi

tags:
	etags $(SRCDIR)*.[ch]

adler32.o zutil.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h
gzclose.o gzlib.o gzread.o gzwrite.o: $(SRCDIR)zlib.h zconf.h $(SRCDIR)gzguts.h
compress.o example.o minigzip.o uncompr.o: $(SRCDIR)zlib.h zconf.h
crc32.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)crc32.h
deflate.o: $(SRCDIR)deflate.h $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h
infback.o inflate.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h $(SRCDIR)inflate.h $(SRCDIR)inffast.h $(SRCDIR)inffixed.h
inffast.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h $(SRCDIR)inflate.h $(SRCDIR)inffast.h
inftrees.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h
trees.o: $(SRCDIR)deflate.h $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)trees.h

adler32.lo zutil.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h
gzclose.lo gzlib.lo gzread.lo gzwrite.lo: $(SRCDIR)zlib.h zconf.h $(SRCDIR)gzguts.h
compress.lo example.lo minigzip.lo uncompr.lo: $(SRCDIR)zlib.h zconf.h
crc32.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)crc32.h
deflate.lo: $(SRCDIR)deflate.h $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h
infback.lo inflate.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h $(SRCDIR)inflate.h $(SRCDIR)inffast.h $(SRCDIR)inffixed.h
inffast.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h $(SRCDIR)inflate.h $(SRCDIR)inffast.h
inftrees.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h
trees.lo: $(SRCDIR)deflate.h $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)trees.h

LDFLAGS=
TEST_LDFLAGS=-L. libz.a
LDSHARED=$(CC)
CPP=$(CC) -E

STATICLIB=libz.a
SHAREDLIB=libz.so
SHAREDLIBV=libz.so.1.2.12
SHAREDLIBM=libz.so.1
LIBS=$(STATICLIB) $(SHAREDLIBV)

AR=ar
ARFLAGS=rc
RANLIB=ranlib
LDCONFIG=ldconfig

teststatic: static
	@TMPST=tmpst_$$; \
	if echo hello world | ./minigzip | ./minigzip -d && ./example $$TMPST ; then \
	  echo '		*** zlib test OK ***'; \
	else \
	  echo '		*** zlib test FAILED ***'; false; \
	fi
	@rm -f tmpst_$$

testshared: shared
	@LD_LIBRARY_PATH=`pwd`:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
	LD_LIBRARYN32_PATH=`pwd`:$(LD_LIBRARYN32_PATH) ; export LD_LIBRARYN32_PATH; \
	DYLD_LIBRARY_PATH=`pwd`:$(DYLD_LIBRARY_PATH) ; export DYLD_LIBRARY_PATH; \
	SHLIB_PATH=`pwd`:$(SHLIB_PATH) ; export SHLIB_PATH; \
	TMPSH=tmpsh_$$; \
	if echo hello world | ./minigzipsh | ./minigzipsh -d && ./examplesh $$TMPSH; then \
	  echo '		*** zlib shared test OK ***'; \
	else \
	  echo '		*** zlib shared test FAILED ***'; false; \
	fi
	@rm -f tmpsh_$$

test64: all64
	@TMP64=tmp64_$$; \
	if echo hello world | ./minigzip64 | ./minigzip64 -d && ./example64 $$TMP64; then \
	  echo '		*** zlib 64-bit test OK ***'; \
	else \
	  echo '		*** zlib 64-bit test FAILED ***'; false; \
	fi
	@rm -f tmp64_$$

infcover.o: $(SRCDIR)test/infcover.c $(SRCDIR)zlib.h zconf.h
	$(CC) $(CFLAGS) $(ZINCOUT) -c -o $@ $(SRCDIR)test/infcover.c

infcover: infcover.o libz.a
	$(CC) $(CFLAGS) -o $@ infcover.o libz.a

gzwrite.o: $(SRCDIR)gzwrite.c
	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)gzwrite.c


adler32.lo: $(SRCDIR)adler32.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/adler32.o $(SRCDIR)adler32.c
	-@mv objs/adler32.o $@

crc32.lo: $(SRCDIR)crc32.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/crc32.o $(SRCDIR)crc32.c
	-@mv objs/crc32.o $@

deflate.lo: $(SRCDIR)deflate.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/deflate.o $(SRCDIR)deflate.c
	-@mv objs/deflate.o $@

infback.lo: $(SRCDIR)infback.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/infback.o $(SRCDIR)infback.c
	-@mv objs/infback.o $@

inffast.lo: $(SRCDIR)inffast.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/inffast.o $(SRCDIR)inffast.c
	-@mv objs/inffast.o $@

inflate.lo: $(SRCDIR)inflate.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/inflate.o $(SRCDIR)inflate.c
	-@mv objs/inflate.o $@

inftrees.lo: $(SRCDIR)inftrees.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/inftrees.o $(SRCDIR)inftrees.c
	-@mv objs/inftrees.o $@

trees.lo: $(SRCDIR)trees.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/trees.o $(SRCDIR)trees.c
	-@mv objs/trees.o $@

zutil.lo: $(SRCDIR)zutil.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/zutil.o $(SRCDIR)zutil.c
	-@mv objs/zutil.o $@

compress.lo: $(SRCDIR)compress.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/compress.o $(SRCDIR)compress.c
	-@mv objs/compress.o $@

uncompr.lo: $(SRCDIR)uncompr.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/uncompr.o $(SRCDIR)uncompr.c
	-@mv objs/uncompr.o $@

gzclose.lo: $(SRCDIR)gzclose.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/gzclose.o $(SRCDIR)gzclose.c
	-@mv objs/gzclose.o $@

gzlib.lo: $(SRCDIR)gzlib.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/gzlib.o $(SRCDIR)gzlib.c
	-@mv objs/gzlib.o $@

gzread.lo: $(SRCDIR)gzread.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/gzread.o $(SRCDIR)gzread.c
	-@mv objs/gzread.o $@

gzwrite.lo: $(SRCDIR)gzwrite.c
	-@mkdir objs 2>/dev/null || test -d objs
	$(CC) $(SFLAGS) $(ZINC) -fPIC -c -o objs/gzwrite.o $(SRCDIR)gzwrite.c
	-@mv objs/gzwrite.o $@


placebo $(SHAREDLIBV): $(PIC_OBJS) libz.a
	$(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) $(LDSHAREDLIBC) $(LDFLAGS)
	rm -f $(SHAREDLIB) $(SHAREDLIBM)
	ln -s $@ $(SHAREDLIB)

	   libz.* foo.gz so_locations \
	   _match.s maketree contrib/infback9/*.o
	rm -rf objs
	rm -f *.gcda *.gcno *.gcov
	rm -f contrib/infback9/*.gcda contrib/infback9/*.gcno contrib/infback9/*.gcov

maintainer-clean: distclean
distclean: clean zconf zconf.h.cmakein
	rm -f Makefile zlib.pc configure.log
	-@rm -f .DS_Store
	@if [ -f Makefile.in ]; then \
	printf 'all:\n\t-@echo "Please use ./configure first.  Thank you."\n' > Makefile ; \
	printf '\ndistclean:\n\tmake -f Makefile.in distclean\n' >> Makefile ; \
	touch -r $(SRCDIR)Makefile.in Makefile ; fi



tags:
	etags $(SRCDIR)*.[ch]

adler32.o zutil.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h
gzclose.o gzlib.o gzread.o gzwrite.o: $(SRCDIR)zlib.h zconf.h $(SRCDIR)gzguts.h
compress.o example.o minigzip.o uncompr.o: $(SRCDIR)zlib.h zconf.h

ZLIB DATA COMPRESSION LIBRARY

zlib 1.2.12 is a general purpose data compression library.  All the code is
thread safe.  The data format used by the zlib library is described by RFCs
(Request for Comments) 1950 to 1952 in the files
http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
rfc1952 (gzip format).

All functions of the compression library are documented in the file zlib.h
(volunteer to write man pages welcome, contact zlib@gzip.org).  A usage example

PLEASE read the zlib FAQ http://zlib.net/zlib_faq.html before asking for help.

Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan.  1997
issue of Dr.  Dobb's Journal; a copy of the article is available at
http://marknelson.us/1997/01/01/zlib-engine/ .

The changes made in version 1.2.12 are documented in the file ChangeLog.

Unsupported third party contributions are provided in directory contrib/ .

zlib is available in Java using the java.util.zip package, documented at
http://java.sun.com/developer/technicalArticles/Programming/compression/ .

A Perl interface to zlib written by Paul Marquess <pmqs@cpan.org> is available

  The deflate format used by zlib was defined by Phil Katz.  The deflate and
  zlib specifications were written by L.  Peter Deutsch.  Thanks to all the
  people who reported problems and suggested various improvements in zlib; they
  are too numerous to cite here.

Copyright notice:

 (C) 1995-2022 Jean-loup Gailly and Mark Adler

  This software is provided 'as-is', without any express or implied
  warranty.  In no event will the authors be held liable for any damages
  arising from the use of this software.

  Permission is granted to anyone to use this software for any purpose,
  including commercial applications, and to alter it and redistribute it

  Jean-loup Gailly        Mark Adler
  jloup@gzip.org          madler@alumni.caltech.edu

If you use the zlib library in a product, we would appreciate *not* receiving
lengthy legal documents to sign.  The sources are provided for free but without
warranty of any kind.  The library has been entirely written by Jean-loup
Gailly and Mark Adler; it does not include third-party code.  We make all
contributions to and distributions of this project solely in our personal
capacity, and are not conveying any rights to any intellectual property of
any third parties.

If you redistribute modified sources, we would appreciate that you include in
the file ChangeLog history information documenting your changes.  Please read
the FAQ for more information on the distribution of modified source versions.

cover=0
zprefix=0
zconst=0
build64=0
gcc=0
warn=0
debug=0
sanitize=0
old_cc="$CC"
old_cflags="$CFLAGS"
OBJC='$(OBJZ) $(OBJG)'
PIC_OBJC='$(PIC_OBJZ) $(PIC_OBJG)'

# leave this script, optionally in a bad way
leave()

    -6* | --64) build64=1; shift ;;
    -a*=* | --archs=*) ARCHS=`echo $1 | sed 's/.*=//'`; shift ;;
    --sysconfdir=*) echo "ignored option: --sysconfdir" | tee -a configure.log; shift ;;
    --localstatedir=*) echo "ignored option: --localstatedir" | tee -a configure.log; shift ;;
    -c* | --const) zconst=1; shift ;;
    -w* | --warn) warn=1; shift ;;
    -d* | --debug) debug=1; shift ;;
    --sanitize) sanitize=1; shift ;;
    *)
      echo "unknown option: $1" | tee -a configure.log
      echo "$0 --help for help" | tee -a configure.log
      leave 1;;
    esac
done

# check for gcc vs. cc and set compile and link flags based on the system identified by uname
cat > $test.c <<EOF
extern int getchar();
int hello() {return getchar();}
EOF

if test -z "$CC"; then
  echo Checking for ${CROSS_PREFIX}gcc... | tee -a configure.log
  if ${CROSS_PREFIX}gcc -v >/dev/null 2>&1; then
    cc=${CROSS_PREFIX}gcc
  else
    cc=${CROSS_PREFIX}cc
  fi
fi
cflags=${CFLAGS-"-O3"}
# to force the asm version use: CFLAGS="-O3 -DASMV" ./configure
case "$cc" in
  *gcc*) gcc=1 ;;
  *clang*) gcc=1 ;;
esac
case `$cc -v 2>&1` in

  if test "$warn" -eq 1; then
    if test "$zconst" -eq 1; then
      CFLAGS="${CFLAGS} -Wall -Wextra -Wcast-qual -pedantic -DZLIB_CONST"
    else
      CFLAGS="${CFLAGS} -Wall -Wextra -pedantic"
    fi
  fi
  if test $sanitize -eq 1; then
    CFLAGS="${CFLAGS} -fsanitize=address"
  fi
  if test $debug -eq 1; then
    CFLAGS="${CFLAGS} -DZLIB_DEBUG"
    SFLAGS="${SFLAGS} -DZLIB_DEBUG"
  fi
  if test -z "$uname"; then
    uname=`(uname -s || echo unknown) 2>/dev/null`
  fi

    test "`( $* ) 2>&1 | tee -a configure.log`" = ""
  }
  echo - using any output from compiler to indicate an error >> configure.log
else
  try()
  {
    show $*
    got=`( $* ) 2>&1`
    ret=$?
    if test "$got" != ""; then
      printf "%s\n" "$got" >> configure.log
    fi
    if test $ret -ne 0; then
      echo "(exit code "$ret")" >> configure.log
    fi
    return $ret
  }
fi

tryboth()
{
  show $*
  got=`( $* ) 2>&1`
  ret=$?
  if test "$got" != ""; then
    printf "%s\n" "$got" >> configure.log
  fi
  if test $ret -ne 0; then
    echo "(exit code "$ret")" >> configure.log
    return $ret
  fi
  test "$got" = ""
}

cat > $test.c << EOF
int foo() { return 0; }

cat > $test.c <<EOF
#include <stdio.h>
#include <stdlib.h>
size_t dummy = 0;
EOF
if try $CC -c $CFLAGS $test.c; then
  echo "Checking for size_t... Yes." | tee -a configure.log

else
  echo "Checking for size_t... No." | tee -a configure.log


  # find a size_t integer type

  # check for long long


  cat > $test.c << EOF
long long dummy = 0;
EOF
  if try $CC -c $CFLAGS $test.c; then
    echo "Checking for long long... Yes." | tee -a configure.log
    cat > $test.c <<EOF
#include <stdio.h>
int main(void) {

    return 0;
}
EOF
  fi
  if try $CC $CFLAGS -o $test $test.c; then
    sizet=`./$test`
    echo "Checking for a pointer-size integer type..." $sizet"." | tee -a configure.log
    CFLAGS="${CFLAGS} -DNO_SIZE_T=${sizet}"
    SFLAGS="${SFLAGS} -DNO_SIZE_T=${sizet}"
  else
    echo "Checking for a pointer-size integer type... not found." | tee -a configure.log

  fi





fi

echo >> configure.log

# check for large file support, and if none, check for fseeko()
cat > $test.c <<EOF
#include <sys/types.h>

echo SFLAGS = $SFLAGS >> configure.log
echo SHAREDLIB = $SHAREDLIB >> configure.log
echo SHAREDLIBM = $SHAREDLIBM >> configure.log
echo SHAREDLIBV = $SHAREDLIBV >> configure.log
echo STATICLIB = $STATICLIB >> configure.log
echo TEST = $TEST >> configure.log
echo VER = $VER >> configure.log

echo SRCDIR = $SRCDIR >> configure.log
echo exec_prefix = $exec_prefix >> configure.log
echo includedir = $includedir >> configure.log
echo libdir = $libdir >> configure.log
echo mandir = $mandir >> configure.log
echo prefix = $prefix >> configure.log
echo sharedlibdir = $sharedlibdir >> configure.log

All files under this contrib directory are UNSUPPORTED. There were
provided by users of zlib and were not tested by the authors of zlib.
Use at your own risk. Please contact the authors of the contributions
for help about these, not the zlib authors. Thanks.


ada/        by Dmitriy Anisimkov <anisimkov@yahoo.com>
        Support for Ada
        See http://zlib-ada.sourceforge.net/









blast/      by Mark Adler <madler@alumni.caltech.edu>
        Decompressor for output of PKWare Data Compression Library (DCL)

delphi/     by Cosmin Truta <cosmint@cs.ubbcluj.ro>
        Support for Delphi and C++ Builder

dotzlib/    by Henrik Ravn <henrik@ravn.com>
        Support for Microsoft .Net and Visual C++ .Net

gcc_gvmat64/by Gilles Vollant <info@winimage.com>
        GCC Version of x86 64-bit (AMD64 and Intel EM64t) code for x64
        assembler to replace longest_match() and inflate_fast()

infback9/   by Mark Adler <madler@alumni.caltech.edu>
        Unsupported diffs to infback to decode the deflate64 format




iostream/   by Kevin Ruland <kevin@rodin.wustl.edu>
        A C++ I/O streams interface to the zlib gz* functions

iostream2/  by Tyge Løvset <Tyge.Lovset@cmr.no>
        Another C++ I/O streams interface

iostream3/  by Ludwig Schwardt <schwardt@sun.ac.za>
            and Kevin Ruland <kevin@rodin.wustl.edu>
        Yet another C++ I/O streams interface











minizip/    by Gilles Vollant <info@winimage.com>
        Mini zip and unzip based on zlib
        Includes Zip64 support by Mathias Svensson <mathias@result42.com>
        See http://www.winimage.com/zLibDll/minizip.html

pascal/     by Bob Dellaca <bobdl@xtra.co.nz> et al.
        Support for Pascal

 * The input function is invoked: len = infun(how, &buf), where buf is set by
 * infun() to point to the input buffer, and infun() returns the number of
 * available bytes there.  If infun() returns zero, then blast() returns with
 * an input error.  (blast() only asks for input if it needs it.)  inhow is for
 * use by the application to pass an input descriptor to infun(), if desired.
 *
 * If left and in are not NULL and *left is not zero when blast() is called,
 * then the *left bytes at *in are consumed for input before infun() is used.
 *
 * The output function is invoked: err = outfun(how, buf, len), where the bytes
 * to be written are buf[0..len-1].  If err is not zero, then blast() returns
 * with an output error.  outfun() is always called with len <= 4096.  outhow
 * is for use by the application to pass an output descriptor to outfun(), if
 * desired.
 *

       InBytes = number of bytes in InBuf
  Out: OutBuf = ptr to user-allocated buffer to contain decompressed data
       BufSize = number of bytes in OutBuf   }
procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
  const OutBuf: Pointer; BufSize: Integer);

const
  zlib_version = '1.2.12';

type
  EZlibError = class(Exception);
  ECompressionError = class(EZlibError);
  EDecompressionError = class(EZlibError);

implementation

    public class InfoTests
    {
        #region Info tests
        [Test]
        public void Info_Version()
        {
            Info info = new Info();
            Assert.AreEqual("1.2.12", Info.Version);
            Assert.AreEqual(32, info.SizeOfUInt);
            Assert.AreEqual(32, info.SizeOfULong);
            Assert.AreEqual(32, info.SizeOfPointer);
            Assert.AreEqual(32, info.SizeOfOffset);
        }
        #endregion
    }

/* inftree9.c -- generate Huffman trees for efficient decoding
 * Copyright (C) 1995-2022 Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

#include "zutil.h"
#include "inftree9.h"

#define MAXBITS 15

const char inflate9_copyright[] =
   " inflate9 1.2.12 Copyright 1995-2022 Mark Adler ";
/*
  If you use the zlib library in a product, an acknowledgment is welcome
  in the documentation of your product. If for some reason you cannot
  include such an acknowledgment, I would appreciate that you keep this
  copyright string in the executable of your product.
 */

    static const unsigned short lbase[31] = { /* Length codes 257..285 base */
        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17,
        19, 23, 27, 31, 35, 43, 51, 59, 67, 83, 99, 115,
        131, 163, 195, 227, 3, 0, 0};
    static const unsigned short lext[31] = { /* Length codes 257..285 extra */
        128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
        130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
        133, 133, 133, 133, 144, 199, 202};
    static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
        65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,
        4097, 6145, 8193, 12289, 16385, 24577, 32769, 49153};
    static const unsigned short dext[32] = { /* Distance codes 0..31 extra */
        128, 128, 128, 128, 129, 129, 130, 130, 131, 131, 132, 132,
        133, 133, 134, 134, 135, 135, 136, 136, 137, 137, 138, 138,

CC=cc
CFLAGS := $(CFLAGS) -O -I../..

UNZ_OBJS = miniunz.o unzip.o ioapi.o ../../libz.a
ZIP_OBJS = minizip.o zip.o   ioapi.o ../../libz.a

.c.o:
	$(CC) -c $(CFLAGS) $*.c

all: miniunz minizip

miniunz:  $(UNZ_OBJS)
	$(CC) $(CFLAGS) -o $@ $(UNZ_OBJS)

minizip:  $(ZIP_OBJS)
	$(CC) $(CFLAGS) -o $@ $(ZIP_OBJS)

test:	miniunz minizip
	@rm -f test.*
	@echo hello hello hello > test.txt
	./minizip test test.txt
	./miniunz -l test.zip
	@mv test.txt test.old
	./miniunz test.zip
	@cmp test.txt test.old
	@rm -f test.*

clean:
	/bin/rm -f *.o *~ minizip miniunz test.*

#                                               -*- Autoconf -*-
# Process this file with autoconf to produce a configure script.

AC_INIT([minizip], [1.2.12], [bugzilla.redhat.com])
AC_CONFIG_SRCDIR([minizip.c])
AM_INIT_AUTOMAKE([foreign])
LT_INIT

AC_MSG_CHECKING([whether to build example programs])
AC_ARG_ENABLE([demos], AC_HELP_STRING([--enable-demos], [build example programs]))
AM_CONDITIONAL([COND_DEMOS], [test "$enable_demos" = yes])

 */
static int decrypt_byte(unsigned long* pkeys, const z_crc_t* pcrc_32_tab)
{
    unsigned temp;  /* POTENTIAL BUG:  temp*(temp^1) may overflow in an
                     * unpredictable manner on 16-bit systems; not a problem
                     * with any known compiler so far, though */

    (void)pcrc_32_tab;
    temp = ((unsigned)(*(pkeys+2)) & 0xffff) | 2;
    return (int)(((temp * (temp ^ 1)) >> 8) & 0xff);
}

/***********************************************************************
 * Update the encryption keys with the next byte of plain text
 */

    }
}

#define zdecode(pkeys,pcrc_32_tab,c) \
    (update_keys(pkeys,pcrc_32_tab,c ^= decrypt_byte(pkeys,pcrc_32_tab)))

#define zencode(pkeys,pcrc_32_tab,c,t) \
    (t=decrypt_byte(pkeys,pcrc_32_tab), update_keys(pkeys,pcrc_32_tab,c), (Byte)t^(c))

#ifdef INCLUDECRYPTINGCODE_IFCRYPTALLOWED

#define RAND_HEAD_LEN  12
   /* "last resort" source for second part of crypt seed pattern */
#  ifndef ZCR_SEED2
#    define ZCR_SEED2 3141592654L       /* use PI as default pattern */
#  endif

static unsigned crypthead(const char* passwd,       /* password string */
                          unsigned char* buf,       /* where to write header */
                          int bufSize,
                          unsigned long* pkeys,
                          const z_crc_t* pcrc_32_tab,
                          unsigned long crcForCrypting)
{
    unsigned n;                  /* index in random header */
    int t;                       /* temporary */
    int c;                       /* random byte */
    unsigned char header[RAND_HEAD_LEN-2]; /* random header */
    static unsigned calls = 0;   /* ensure different random header each time */

    if (bufSize<RAND_HEAD_LEN)
      return 0;

ZPOS64_T call_ztell64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream)
{
    if (pfilefunc->zfile_func64.zseek64_file != NULL)
        return (*(pfilefunc->zfile_func64.ztell64_file)) (pfilefunc->zfile_func64.opaque,filestream);
    else
    {
        uLong tell_uLong = (uLong)(*(pfilefunc->ztell32_file))(pfilefunc->zfile_func64.opaque,filestream);
        if ((tell_uLong) == MAXU32)
            return (ZPOS64_T)-1;
        else
            return tell_uLong;
    }
}

static ZPOS64_T ZCALLBACK ftell64_file_func OF((voidpf opaque, voidpf stream));
static long    ZCALLBACK fseek64_file_func OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin));
static int     ZCALLBACK fclose_file_func OF((voidpf opaque, voidpf stream));
static int     ZCALLBACK ferror_file_func OF((voidpf opaque, voidpf stream));

static voidpf ZCALLBACK fopen_file_func (voidpf opaque, const char* filename, int mode)
{
    (void)opaque;
    FILE* file = NULL;
    const char* mode_fopen = NULL;
    if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
        mode_fopen = "rb";
    else
    if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
        mode_fopen = "r+b";
    else
    if (mode & ZLIB_FILEFUNC_MODE_CREATE)
        mode_fopen = "wb";

    if ((filename!=NULL) && (mode_fopen != NULL))
        file = fopen(filename, mode_fopen);
    return file;
}

static voidpf ZCALLBACK fopen64_file_func (voidpf opaque, const void* filename, int mode)
{
    (void)opaque;
    FILE* file = NULL;
    const char* mode_fopen = NULL;
    if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
        mode_fopen = "rb";
    else
    if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
        mode_fopen = "r+b";
    else
    if (mode & ZLIB_FILEFUNC_MODE_CREATE)
        mode_fopen = "wb";

    if ((filename!=NULL) && (mode_fopen != NULL))
        file = FOPEN_FUNC((const char*)filename, mode_fopen);
    return file;
}


static uLong ZCALLBACK fread_file_func (voidpf opaque, voidpf stream, void* buf, uLong size)
{
    (void)opaque;
    uLong ret;
    ret = (uLong)fread(buf, 1, (size_t)size, (FILE *)stream);
    return ret;
}

static uLong ZCALLBACK fwrite_file_func (voidpf opaque, voidpf stream, const void* buf, uLong size)
{
    (void)opaque;
    uLong ret;
    ret = (uLong)fwrite(buf, 1, (size_t)size, (FILE *)stream);
    return ret;
}

static long ZCALLBACK ftell_file_func (voidpf opaque, voidpf stream)
{
    (void)opaque;
    long ret;
    ret = ftell((FILE *)stream);
    return ret;
}


static ZPOS64_T ZCALLBACK ftell64_file_func (voidpf opaque, voidpf stream)
{
    (void)opaque;
    ZPOS64_T ret;
    ret = (ZPOS64_T)FTELLO_FUNC((FILE *)stream);
    return ret;
}

static long ZCALLBACK fseek_file_func (voidpf  opaque, voidpf stream, uLong offset, int origin)
{
    (void)opaque;
    int fseek_origin=0;
    long ret;
    switch (origin)
    {
    case ZLIB_FILEFUNC_SEEK_CUR :
        fseek_origin = SEEK_CUR;
        break;
    case ZLIB_FILEFUNC_SEEK_END :
        fseek_origin = SEEK_END;
        break;
    case ZLIB_FILEFUNC_SEEK_SET :
        fseek_origin = SEEK_SET;
        break;
    default: return -1;
    }
    ret = 0;
    if (fseek((FILE *)stream, (long)offset, fseek_origin) != 0)
        ret = -1;
    return ret;
}

static long ZCALLBACK fseek64_file_func (voidpf  opaque, voidpf stream, ZPOS64_T offset, int origin)
{
    (void)opaque;
    int fseek_origin=0;
    long ret;
    switch (origin)
    {
    case ZLIB_FILEFUNC_SEEK_CUR :
        fseek_origin = SEEK_CUR;
        break;
    case ZLIB_FILEFUNC_SEEK_END :
        fseek_origin = SEEK_END;
        break;
    case ZLIB_FILEFUNC_SEEK_SET :
        fseek_origin = SEEK_SET;
        break;
    default: return -1;
    }
    ret = 0;

    if(FSEEKO_FUNC((FILE *)stream, (long)offset, fseek_origin) != 0)
                        ret = -1;

    return ret;
}


static int ZCALLBACK fclose_file_func (voidpf opaque, voidpf stream)
{
    (void)opaque;
    int ret;
    ret = fclose((FILE *)stream);
    return ret;
}

static int ZCALLBACK ferror_file_func (voidpf opaque, voidpf stream)
{
    (void)opaque;
    int ret;
    ret = ferror((FILE *)stream);
    return ret;
}

void fill_fopen_filefunc (pzlib_filefunc_def)
  zlib_filefunc_def* pzlib_filefunc_def;

typedef  64BIT_INT_CUSTOM_TYPE ZPOS64_T;
#else
#ifdef HAS_STDINT_H
#include "stdint.h"
typedef uint64_t ZPOS64_T;
#else




#if defined(_MSC_VER) || defined(__BORLANDC__)
typedef unsigned __int64 ZPOS64_T;
#else
typedef unsigned long long int ZPOS64_T;
#endif
#endif
#endif

/* Maximum unsigned 32-bit value used as placeholder for zip64 */
#ifndef MAXU32
#define MAXU32 (0xffffffff)
#endif

#ifdef __cplusplus
extern "C" {
#endif


#define ZLIB_FILEFUNC_SEEK_CUR (1)

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#include <errno.h>
#include <fcntl.h>
#include <sys/stat.h>

#ifdef _WIN32
# include <direct.h>
# include <io.h>
#else
# include <unistd.h>
# include <utime.h>

*/


/* change_file_date : change the date/time of a file
    filename : the filename of the file where date/time must be modified
    dosdate : the new date at the MSDos format (4 bytes)
    tmu_date : the SAME new date at the tm_unz format */
static void change_file_date(filename,dosdate,tmu_date)
    const char *filename;
    uLong dosdate;
    tm_unz tmu_date;
{
#ifdef _WIN32
  HANDLE hFile;
  FILETIME ftm,ftLocal,ftCreate,ftLastAcc,ftLastWrite;

  hFile = CreateFileA(filename,GENERIC_READ | GENERIC_WRITE,
                      0,NULL,OPEN_EXISTING,0,NULL);
  GetFileTime(hFile,&ftCreate,&ftLastAcc,&ftLastWrite);
  DosDateTimeToFileTime((WORD)(dosdate>>16),(WORD)dosdate,&ftLocal);
  LocalFileTimeToFileTime(&ftLocal,&ftm);
  SetFileTime(hFile,&ftm,&ftLastAcc,&ftm);
  CloseHandle(hFile);
#else
#if defined(unix) || defined(__APPLE__)
  (void)dosdate;
  struct utimbuf ut;
  struct tm newdate;
  newdate.tm_sec = tmu_date.tm_sec;
  newdate.tm_min=tmu_date.tm_min;
  newdate.tm_hour=tmu_date.tm_hour;
  newdate.tm_mday=tmu_date.tm_mday;
  newdate.tm_mon=tmu_date.tm_mon;

#endif
}


/* mymkdir and change_file_date are not 100 % portable
   As I don't know well Unix, I wait feedback for the unix portion */

static int mymkdir(dirname)
    const char* dirname;
{
    int ret=0;
#ifdef _WIN32
    ret = _mkdir(dirname);
#elif unix
    ret = mkdir (dirname,0775);
#elif __APPLE__
    ret = mkdir (dirname,0775);
#endif
    return ret;
}

static int makedir (newdir)
    const char *newdir;
{
  char *buffer ;
  char *p;
  size_t len = strlen(newdir);

  if (len == 0)
    return 0;

  buffer = (char*)malloc(len+1);
        if (buffer==NULL)
        {
                printf("Error allocating memory\n");
                return UNZ_INTERNALERROR;

        break;
      *p++ = hold;
    }
  free(buffer);
  return 1;
}

static void do_banner()
{
    printf("MiniUnz 1.01b, demo of zLib + Unz package written by Gilles Vollant\n");
    printf("more info at http://www.winimage.com/zLibDll/unzip.html\n\n");
}

static void do_help()
{
    printf("Usage : miniunz [-e] [-x] [-v] [-l] [-o] [-p password] file.zip [file_to_extr.] [-d extractdir]\n\n" \
           "  -e  Extract without pathname (junk paths)\n" \
           "  -x  Extract with pathname\n" \
           "  -v  list files\n" \
           "  -l  list files\n" \
           "  -d  directory to extract into\n" \
           "  -o  overwrite files without prompting\n" \
           "  -p  extract crypted file using password\n\n");
}

static void Display64BitsSize(ZPOS64_T n, int size_char)
{
  /* to avoid compatibility problem , we do here the conversion */
  char number[21];
  int offset=19;
  int pos_string = 19;
  number[20]=0;
  for (;;) {

          printf(" ");
      }
  }

  printf("%s",&number[pos_string]);
}

static int do_list(uf)
    unzFile uf;
{
    uLong i;
    unz_global_info64 gi;
    int err;

    err = unzGetGlobalInfo64(uf,&gi);

        }
    }

    return 0;
}


static int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
    unzFile uf;
    const int* popt_extract_without_path;
    int* popt_overwrite;
    const char* password;
{
    char filename_inzip[256];
    char* filename_withoutpath;
    char* p;
    int err=UNZ_OK;
    FILE *fout=NULL;
    void* buf;
    uInt size_buf;

    unz_file_info64 file_info;

    err = unzGetCurrentFileInfo64(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);

    if (err!=UNZ_OK)
    {
        printf("error %d with zipfile in unzGetCurrentFileInfo\n",err);
        return err;
    }

                err = unzReadCurrentFile(uf,buf,size_buf);
                if (err<0)
                {
                    printf("error %d with zipfile in unzReadCurrentFile\n",err);
                    break;
                }
                if (err>0)
                    if (fwrite(buf,(unsigned)err,1,fout)!=1)
                    {
                        printf("error in writing extracted file\n");
                        err=UNZ_ERRNO;
                        break;
                    }
            }
            while (err>0);

    }

    free(buf);
    return err;
}


static int do_extract(uf,opt_extract_without_path,opt_overwrite,password)
    unzFile uf;
    int opt_extract_without_path;
    int opt_overwrite;
    const char* password;
{
    uLong i;
    unz_global_info64 gi;
    int err;


    err = unzGetGlobalInfo64(uf,&gi);
    if (err!=UNZ_OK)
        printf("error %d with zipfile in unzGetGlobalInfo \n",err);

    for (i=0;i<gi.number_entry;i++)
    {

            }
        }
    }

    return 0;
}

static int do_extract_onefile(uf,filename,opt_extract_without_path,opt_overwrite,password)
    unzFile uf;
    const char* filename;
    int opt_extract_without_path;
    int opt_overwrite;
    const char* password;
{

    if (unzLocateFile(uf,filename,CASESENSITIVITY)!=UNZ_OK)
    {
        printf("file %s not found in the zipfile\n",filename);
        return 2;
    }

    if (do_extract_currentfile(uf,&opt_extract_without_path,

#define WRITEBUFFERSIZE (16384)
#define MAXFILENAME (256)

#ifdef _WIN32
static int filetime(f, tmzip, dt)
    const char *f;          /* name of file to get info on */
    tm_zip *tmzip;             /* return value: access, modific. and creation times */
    uLong *dt;             /* dostime */
{
  int ret = 0;
  {
      FILETIME ftLocal;
      HANDLE hFind;

        FindClose(hFind);
        ret = 1;
      }
  }
  return ret;
}
#else
#if defined(unix) || defined(__APPLE__)
static int filetime(f, tmzip, dt)
    const char *f;         /* name of file to get info on */
    tm_zip *tmzip;         /* return value: access, modific. and creation times */
    uLong *dt;             /* dostime */
{
  (void)dt;
  int ret=0;
  struct stat s;        /* results of stat() */
  struct tm* filedate;
  time_t tm_t=0;

  if (strcmp(f,"-")!=0)
  {
    char name[MAXFILENAME+1];
    size_t len = strlen(f);
    if (len > MAXFILENAME)
      len = MAXFILENAME;

    strncpy(name, f,MAXFILENAME-1);
    /* strncpy doesnt append the trailing NULL, of the string is too long. */
    name[ MAXFILENAME ] = '\0';

  tmzip->tm_mon  = filedate->tm_mon ;
  tmzip->tm_year = filedate->tm_year;

  return ret;
}
#else
uLong filetime(f, tmzip, dt)
    const char *f;          /* name of file to get info on */
    tm_zip *tmzip;             /* return value: access, modific. and creation times */
    uLong *dt;             /* dostime */
{
    return 0;
}
#endif
#endif




static int check_exist_file(filename)
    const char* filename;
{
    FILE* ftestexist;
    int ret = 1;
    ftestexist = FOPEN_FUNC(filename,"rb");
    if (ftestexist==NULL)
        ret = 0;
    else
        fclose(ftestexist);
    return ret;
}

static void do_banner()
{
    printf("MiniZip 1.1, demo of zLib + MiniZip64 package, written by Gilles Vollant\n");
    printf("more info on MiniZip at http://www.winimage.com/zLibDll/minizip.html\n\n");
}

static void do_help()
{
    printf("Usage : minizip [-o] [-a] [-0 to -9] [-p password] [-j] file.zip [files_to_add]\n\n" \
           "  -o  Overwrite existing file.zip\n" \
           "  -a  Append to existing file.zip\n" \
           "  -0  Store only\n" \
           "  -1  Compress faster\n" \
           "  -9  Compress better\n\n" \
           "  -j  exclude path. store only the file name.\n\n");
}

/* calculate the CRC32 of a file,
   because to encrypt a file, we need known the CRC32 of the file before */
static int getFileCrc(const char* filenameinzip,void*buf,unsigned long size_buf,unsigned long* result_crc)
{
   unsigned long calculate_crc=0;
   int err=ZIP_OK;
   FILE * fin = FOPEN_FUNC(filenameinzip,"rb");

   unsigned long size_read = 0;
   unsigned long total_read = 0;
   if (fin==NULL)
   {
       err = ZIP_ERRNO;
   }

    if (err == ZIP_OK)
        do
        {
            err = ZIP_OK;
            size_read = fread(buf,1,size_buf,fin);
            if (size_read < size_buf)
                if (feof(fin)==0)
            {
                printf("error in reading %s\n",filenameinzip);
                err = ZIP_ERRNO;
            }

            if (size_read>0)
                calculate_crc = crc32_z(calculate_crc,buf,size_read);
            total_read += size_read;

        } while ((err == ZIP_OK) && (size_read>0));

    if (fin)
        fclose(fin);

    *result_crc=calculate_crc;
    printf("file %s crc %lx\n", filenameinzip, calculate_crc);
    return err;
}

static int isLargeFile(const char* filename)
{
  int largeFile = 0;
  ZPOS64_T pos = 0;
  FILE* pFile = FOPEN_FUNC(filename, "rb");

  if(pFile != NULL)
  {
    FSEEKO_FUNC(pFile, 0, SEEK_END);
    pos = (ZPOS64_T)FTELLO_FUNC(pFile);

                printf("File : %s is %lld bytes\n", filename, pos);

    if(pos >= 0xffffffff)
     largeFile = 1;

                fclose(pFile);

    int opt_overwrite=0;
    int opt_compress_level=Z_DEFAULT_COMPRESSION;
    int opt_exclude_path=0;
    int zipfilenamearg = 0;
    char filename_try[MAXFILENAME+16];
    int zipok;
    int err=0;
    size_t size_buf=0;
    void* buf=NULL;
    const char* password=NULL;


    do_banner();
    if (argc==1)
    {

                  ((argv[i][1]=='o') || (argv[i][1]=='O') ||
                   (argv[i][1]=='a') || (argv[i][1]=='A') ||
                   (argv[i][1]=='p') || (argv[i][1]=='P') ||
                   ((argv[i][1]>='0') || (argv[i][1]<='9'))) &&
                  (strlen(argv[i]) == 2)))
            {
                FILE * fin;
                size_t size_read;
                const char* filenameinzip = argv[i];
                const char *savefilenameinzip;
                zip_fileinfo zi;
                unsigned long crcFile=0;
                int zip64 = 0;

                zi.tmz_date.tm_sec = zi.tmz_date.tm_min = zi.tmz_date.tm_hour =

                    }
                }

                if (err == ZIP_OK)
                    do
                    {
                        err = ZIP_OK;
                        size_read = fread(buf,1,size_buf,fin);
                        if (size_read < size_buf)
                            if (feof(fin)==0)
                        {
                            printf("error in reading %s\n",filenameinzip);
                            err = ZIP_ERRNO;
                        }

                        if (size_read>0)
                        {
                            err = zipWriteInFileInZip (zf,buf,(unsigned)size_read);
                            if (err<0)
                            {
                                printf("error in writing %s in the zipfile\n",
                                                 filenameinzip);
                            }

                        }

        if (ZREAD64(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize)
            break;

        for (i=(int)uReadSize-3; (i--)>0;)
            if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) &&
                ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06))
            {
                uPosFound = uReadPos+(unsigned)i;
                break;
            }

        if (uPosFound!=0)
            break;
    }
    TRYFREE(buf);

        if (ZREAD64(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize)
            break;

        for (i=(int)uReadSize-3; (i--)>0;)
            if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) &&
                ((*(buf+i+2))==0x06) && ((*(buf+i+3))==0x07))
            {
                uPosFound = uReadPos+(unsigned)i;
                break;
            }

        if (uPosFound!=0)
            break;
    }
    TRYFREE(buf);

/*
   Translate date/time from Dos format to tm_unz (readable more easilty)
*/
local void unz64local_DosDateToTmuDate (ZPOS64_T ulDosDate, tm_unz* ptm)
{
    ZPOS64_T uDate;
    uDate = (ZPOS64_T)(ulDosDate>>16);
    ptm->tm_mday = (int)(uDate&0x1f) ;
    ptm->tm_mon =  (int)((((uDate)&0x1E0)/0x20)-1) ;
    ptm->tm_year = (int)(((uDate&0x0FE00)/0x0200)+1980) ;

    ptm->tm_hour = (int) ((ulDosDate &0xF800)/0x800);
    ptm->tm_min =  (int) ((ulDosDate&0x7E0)/0x20) ;
    ptm->tm_sec =  (int) (2*(ulDosDate&0x1f)) ;
}

/*
  Get Info about the current file in the zipfile, with internal only info
*/
local int unz64local_GetCurrentFileInfoInternal OF((unzFile file,
                                                  unz_file_info64 *pfile_info,

        if (file_info.size_file_extra<extraFieldBufferSize)
            uSizeRead = file_info.size_file_extra;
        else
            uSizeRead = extraFieldBufferSize;

        if (lSeek!=0)
        {
            if (ZSEEK64(s->z_filefunc, s->filestream,(ZPOS64_T)lSeek,ZLIB_FILEFUNC_SEEK_CUR)==0)
                lSeek=0;
            else
                err=UNZ_ERRNO;
        }

        if ((file_info.size_file_extra>0) && (extraFieldBufferSize>0))
            if (ZREAD64(s->z_filefunc, s->filestream,extraField,(uLong)uSizeRead)!=uSizeRead)

                                uLong acc = 0;

        // since lSeek now points to after the extra field we need to move back
        lSeek -= file_info.size_file_extra;

        if (lSeek!=0)
        {
            if (ZSEEK64(s->z_filefunc, s->filestream,(ZPOS64_T)lSeek,ZLIB_FILEFUNC_SEEK_CUR)==0)
                lSeek=0;
            else
                err=UNZ_ERRNO;
        }

        while(acc < file_info.size_file_extra)
        {

            uSizeRead = file_info.size_file_comment;
        }
        else
            uSizeRead = commentBufferSize;

        if (lSeek!=0)
        {
            if (ZSEEK64(s->z_filefunc, s->filestream,(ZPOS64_T)lSeek,ZLIB_FILEFUNC_SEEK_CUR)==0)
                lSeek=0;
            else
                err=UNZ_ERRNO;
        }

        if ((file_info.size_file_comment>0) && (commentBufferSize>0))
            if (ZREAD64(s->z_filefunc, s->filestream,szComment,uSizeRead)!=uSizeRead)

        if ((pfile_in_zip_read_info->compression_method==0) || (pfile_in_zip_read_info->raw))
        {
            uInt uDoCopy,i ;

            if ((pfile_in_zip_read_info->stream.avail_in == 0) &&
                (pfile_in_zip_read_info->rest_read_compressed == 0))
                return (iRead==0) ? UNZ_EOF : (int)iRead;

            if (pfile_in_zip_read_info->stream.avail_out <
                            pfile_in_zip_read_info->stream.avail_in)
                uDoCopy = pfile_in_zip_read_info->stream.avail_out ;
            else
                uDoCopy = pfile_in_zip_read_info->stream.avail_in ;

            */
            err=inflate(&pfile_in_zip_read_info->stream,flush);

            if ((err>=0) && (pfile_in_zip_read_info->stream.msg!=NULL))
              err = Z_DATA_ERROR;

            uTotalOutAfter = pfile_in_zip_read_info->stream.total_out;
            /* Detect overflow, because z_stream.total_out is uLong (32 bits) */
            if (uTotalOutAfter<uTotalOutBefore)
                uTotalOutAfter += 1LL << 32; /* Add maximum value of uLong + 1 */
            uOutThis = uTotalOutAfter-uTotalOutBefore;

            pfile_in_zip_read_info->total_out_64 = pfile_in_zip_read_info->total_out_64 + uOutThis;

            pfile_in_zip_read_info->crc32 =
                crc32(pfile_in_zip_read_info->crc32,bufBefore,
                        (uInt)(uOutThis));

            pfile_in_zip_read_info->rest_read_uncompressed -=
                uOutThis;

            iRead += (uInt)(uTotalOutAfter - uTotalOutBefore);

            if (err==Z_STREAM_END)
                return (iRead==0) ? UNZ_EOF : (int)iRead;
            if (err!=Z_OK)
                break;
        }
    }

    if (err==Z_OK)
        return (int)iRead;
    return err;
}


/*
  Give the current position in uncompressed data
*/

#define UNZ_BADZIPFILE                  (-103)
#define UNZ_INTERNALERROR               (-104)
#define UNZ_CRCERROR                    (-105)

/* tm_unz contain date/time info */
typedef struct tm_unz_s
{
    int tm_sec;             /* seconds after the minute - [0,59] */
    int tm_min;             /* minutes after the hour - [0,59] */
    int tm_hour;            /* hours since midnight - [0,23] */
    int tm_mday;            /* day of the month - [1,31] */
    int tm_mon;             /* months since January - [0,11] */
    int tm_year;            /* years - [1980..2044] */
} tm_unz;

/* unz_global_info structure contain global data about the ZIPfile
   These data comes from the end of central dir */
typedef struct unz_global_info64_s
{
    ZPOS64_T number_entry;         /* total number of entries in

    int  zip64;               /* Add ZIP64 extened information in the extra field */
    ZPOS64_T pos_zip64extrainfo;
    ZPOS64_T totalCompressedData;
    ZPOS64_T totalUncompressedData;
#ifndef NOCRYPT
    unsigned long keys[3];     /* keys defining the pseudo-random sequence */
    const z_crc_t* pcrc_32_tab;
    unsigned crypt_header_size;
#endif
} curfile64_info;

typedef struct
{
    zlib_filefunc64_32_def z_filefunc;
    voidpf filestream;        /* io structore of the zipfile */

      {     /* data overflow - hack for ZIP64 (X Roche) */
      for (n = 0; n < nbByte; n++)
        {
          buf[n] = 0xff;
        }
      }

    if (ZWRITE64(*pzlib_filefunc_def,filestream,buf,(uLong)nbByte)!=(uLong)nbByte)
        return ZIP_ERRNO;
    else
        return ZIP_OK;
}

local void zip64local_putValue_inmemory OF((void* dest, ZPOS64_T x, int nbByte));
local void zip64local_putValue_inmemory (void* dest, ZPOS64_T x, int nbByte)

{
    uLong year = (uLong)ptm->tm_year;
    if (year>=1980)
        year-=1980;
    else if (year>=80)
        year-=80;
    return
      (uLong) (((uLong)(ptm->tm_mday) + (32 * (uLong)(ptm->tm_mon+1)) + (512 * year)) << 16) |
        (((uLong)ptm->tm_sec/2) + (32 * (uLong)ptm->tm_min) + (2048 * (uLong)ptm->tm_hour));
}


/****************************************************************************/

local int zip64local_getByte OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, int *pi));

    if (ZREAD64(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize)
      break;

    for (i=(int)uReadSize-3; (i--)>0;)
      if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) &&
        ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06))
      {
        uPosFound = uReadPos+(unsigned)i;
        break;
      }

    if (uPosFound!=0)
      break;
  }
  TRYFREE(buf);
  return uPosFound;
}

/*
Locate the End of Zip64 Central directory locator and from there find the CD of a zipfile (at the end, just before

      break;

    for (i=(int)uReadSize-3; (i--)>0;)
    {
      // Signature "0x07064b50" Zip64 end of central directory locater
      if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && ((*(buf+i+2))==0x06) && ((*(buf+i+3))==0x07))
      {
        uPosFound = uReadPos+(unsigned)i;
        break;
      }
    }

      if (uPosFound!=0)
        break;
  }

  if (uL != 0x06064b50) // signature of 'Zip64 end of central directory'
    return 0;

  return relativeOffset;
}

local int LoadCentralDirectoryRecord(zip64_internal* pziinit)
{
  int err=ZIP_OK;
  ZPOS64_T byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/

  ZPOS64_T size_central_dir;     /* size of the central directory  */
  ZPOS64_T offset_central_dir;   /* offset of start of central directory */
  ZPOS64_T central_pos;

}

extern zipFile ZEXPORT zipOpen64 (const void* pathname, int append)
{
    return zipOpen3(pathname,append,NULL,NULL);
}

local int Write_LocalFileHeader(zip64_internal* zi, const char* filename, uInt size_extrafield_local, const void* extrafield_local)
{
  /* write the local header */
  int err;
  uInt size_filename = (uInt)strlen(filename);
  uInt size_extrafield = size_extrafield_local;

  err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)LOCALHEADERMAGIC, 4);

      short DataSize = 16;
      ZPOS64_T CompressedSize = 0;
      ZPOS64_T UncompressedSize = 0;

      // Remember position of Zip64 extended info for the local file header. (needed when we update size after done with file)
      zi->ci.pos_zip64extrainfo = ZTELL64(zi->z_filefunc,zi->filestream);

      err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (ZPOS64_T)HeaderID,2);
      err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (ZPOS64_T)DataSize,2);

      err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (ZPOS64_T)UncompressedSize,8);
      err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (ZPOS64_T)CompressedSize,8);
  }

  return err;
}

}

extern int ZEXPORT zipCloseFileInZipRaw64 (zipFile file, ZPOS64_T uncompressed_size, uLong crc32)
{
    zip64_internal* zi;
    ZPOS64_T compressed_size;
    uLong invalidValue = 0xffffffff;
    unsigned datasize = 0;
    int err=ZIP_OK;

    if (file == NULL)
        return ZIP_PARAMERROR;
    zi = (zip64_internal*)file;

    if (zi->in_opened_file_inzip == 0)

}

extern int ZEXPORT zipCloseFileInZip (zipFile file)
{
    return zipCloseFileInZipRaw (file,0,0);
}

local int Write_Zip64EndOfCentralDirectoryLocator(zip64_internal* zi, ZPOS64_T zip64eocd_pos_inzip)
{
  int err = ZIP_OK;
  ZPOS64_T pos = zip64eocd_pos_inzip - zi->add_position_when_writing_offset;

  err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)ZIP64ENDLOCHEADERMAGIC,4);

  /*num disks*/

  /*total disks*/ /* Do not support spawning of disk so always say 1 here*/
    if (err==ZIP_OK) /* number of the disk with the start of the central directory */
      err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)1,4);

    return err;
}

local int Write_Zip64EndOfCentralDirectoryRecord(zip64_internal* zi, uLong size_centraldir, ZPOS64_T centraldir_pos_inzip)
{
  int err = ZIP_OK;

  uLong Zip64DataSize = 44;

  err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)ZIP64ENDHEADERMAGIC,4);

  if (err==ZIP_OK) /* offset of start of central directory with respect to the starting disk number */
  {
    ZPOS64_T pos = centraldir_pos_inzip - zi->add_position_when_writing_offset;
    err = zip64local_putValue(&zi->z_filefunc,zi->filestream, (ZPOS64_T)pos,8);
  }
  return err;
}
local int Write_EndOfCentralDirectoryRecord(zip64_internal* zi, uLong size_centraldir, ZPOS64_T centraldir_pos_inzip)
{
  int err = ZIP_OK;

  /*signature*/
  err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)ENDHEADERMAGIC,4);

  if (err==ZIP_OK) /* number of this disk */

    else
      err = zip64local_putValue(&zi->z_filefunc,zi->filestream, (uLong)(centraldir_pos_inzip - zi->add_position_when_writing_offset),4);
  }

   return err;
}

local int Write_GlobalComment(zip64_internal* zi, const char* global_comment)
{
  int err = ZIP_OK;
  uInt size_global_comment = 0;

  if(global_comment != NULL)
    size_global_comment = (uInt)strlen(global_comment);

  short dataSize;

  int retVal = ZIP_OK;

  if(pData == NULL || *dataLen < 4)
    return ZIP_PARAMERROR;

  pNewHeader = (char*)ALLOC((unsigned)*dataLen);
  pTmp = pNewHeader;

  while(p < (pData + *dataLen))
  {
    header = *(short*)p;
    dataSize = *(((short*)p)+1);

#  endif
#endif
/* default memLevel */

/* tm_zip contain date/time info */
typedef struct tm_zip_s
{
    int tm_sec;             /* seconds after the minute - [0,59] */
    int tm_min;             /* minutes after the hour - [0,59] */
    int tm_hour;            /* hours since midnight - [0,23] */
    int tm_mday;            /* day of the month - [1,31] */
    int tm_mon;             /* months since January - [0,11] */
    int tm_year;            /* years - [1980..2044] */
} tm_zip;

typedef struct
{
    tm_zip      tmz_date;       /* date in understandable format           */
    uLong       dosDate;       /* if dos_date == 0, tmu_date is used      */
/*    uLong       flag;        */   /* general purpose bit flag        2 bytes */

                                   zlib_filefunc_def* pzlib_filefunc_def));

extern zipFile ZEXPORT zipOpen2_64 OF((const void *pathname,
                                   int append,
                                   zipcharpc* globalcomment,
                                   zlib_filefunc64_def* pzlib_filefunc_def));

extern zipFile ZEXPORT zipOpen3 OF((const void *pathname,
                                    int append,
                                    zipcharpc* globalcomment,
                                    zlib_filefunc64_32_def* pzlib_filefunc64_32_def));

extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file,
                       const char* filename,
                       const zip_fileinfo* zipfi,
                       const void* extrafield_local,
                       uInt size_extrafield_local,
                       const void* extrafield_global,
                       uInt size_extrafield_global,

(* zlibpas -- Pascal interface to the zlib data compression library
 *
 * Copyright (C) 2003 Cosmin Truta.
 * Derived from original sources by Bob Dellaca.
 * For conditions of distribution and use, see copyright notice in readme.txt
 *)

unit zlibpas;

interface

const
  ZLIB_VERSION = '1.2.12';
  ZLIB_VERNUM  = $12a0;

type
  alloc_func = function(opaque: Pointer; items, size: Integer): Pointer;
                 cdecl;
  free_func  = procedure(opaque, address: Pointer);
                 cdecl;

Building instructions for the DLL versions of Zlib 1.2.12
========================================================

This directory contains projects that build zlib and minizip using
Microsoft Visual C++ 9.0/10.0.

You don't need to build these projects yourself. You can download the
binaries from:

#include <windows.h>

#define IDR_VERSION1  1
IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
  FILEVERSION	 1, 2, 12, 0
  PRODUCTVERSION 1, 2, 12, 0
  FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
  FILEFLAGS	0
  FILEOS	VOS_DOS_WINDOWS32
  FILETYPE	VFT_DLL
  FILESUBTYPE	0	// not used
BEGIN
  BLOCK "StringFileInfo"
  BEGIN
    BLOCK "040904E4"
    //language ID = U.S. English, char set = Windows, Multilingual

    BEGIN
      VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
      VALUE "FileVersion",	"1.2.12\0"
      VALUE "InternalName",	"zlib\0"
      VALUE "OriginalFilename",	"zlibwapi.dll\0"
      VALUE "ProductName",	"ZLib.DLL\0"
      VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
      VALUE "LegalCopyright", "(C) 1995-2022 Jean-loup Gailly & Mark Adler\0"
    END
  END
  BLOCK "VarFileInfo"
  BEGIN
    VALUE "Translation", 0x0409, 1252
  END
END

        inflateValidate                         @169
        uncompress2                             @170
        gzfread                                 @171
        gzfwrite                                @172
        deflateGetDictionary                    @173
        adler32_z                               @174
        crc32_z                                 @175

; zlib1 v1.2.12 added:
		crc32_combine_gen						@176
		crc32_combine_gen64						@177
		crc32_combine_op						@178

#include <windows.h>

#define IDR_VERSION1  1
IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
  FILEVERSION	 1, 2, 12, 0
  PRODUCTVERSION 1, 2, 12, 0
  FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
  FILEFLAGS	0
  FILEOS	VOS_DOS_WINDOWS32
  FILETYPE	VFT_DLL
  FILESUBTYPE	0	// not used
BEGIN
  BLOCK "StringFileInfo"
  BEGIN
    BLOCK "040904E4"
    //language ID = U.S. English, char set = Windows, Multilingual

    BEGIN
      VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
      VALUE "FileVersion",	"1.2.12\0"
      VALUE "InternalName",	"zlib\0"
      VALUE "OriginalFilename",	"zlibwapi.dll\0"
      VALUE "ProductName",	"ZLib.DLL\0"
      VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
      VALUE "LegalCopyright", "(C) 1995-2022 Jean-loup Gailly & Mark Adler\0"
    END
  END
  BLOCK "VarFileInfo"
  BEGIN
    VALUE "Translation", 0x0409, 1252
  END
END

        inflateValidate                         @169
        uncompress2                             @170
        gzfread                                 @171
        gzfwrite                                @172
        deflateGetDictionary                    @173
        adler32_z                               @174
        crc32_z                                 @175

; zlib1 v1.2.12 added:
		crc32_combine_gen						@176
		crc32_combine_gen64						@177
		crc32_combine_op						@178

#include <windows.h>

#define IDR_VERSION1  1
IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
  FILEVERSION	 1, 2, 12, 0
  PRODUCTVERSION 1, 2, 12, 0
  FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
  FILEFLAGS	0
  FILEOS	VOS_DOS_WINDOWS32
  FILETYPE	VFT_DLL
  FILESUBTYPE	0	// not used
BEGIN
  BLOCK "StringFileInfo"
  BEGIN
    BLOCK "040904E4"
    //language ID = U.S. English, char set = Windows, Multilingual

    BEGIN
      VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
      VALUE "FileVersion",	"1.2.12\0"
      VALUE "InternalName",	"zlib\0"
      VALUE "OriginalFilename",	"zlibwapi.dll\0"
      VALUE "ProductName",	"ZLib.DLL\0"
      VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
      VALUE "LegalCopyright", "(C) 1995-2022 Jean-loup Gailly & Mark Adler\0"
    END
  END
  BLOCK "VarFileInfo"
  BEGIN
    VALUE "Translation", 0x0409, 1252
  END
END

        inflateValidate                         @169
        uncompress2                             @170
        gzfread                                 @171
        gzfwrite                                @172
        deflateGetDictionary                    @173
        adler32_z                               @174
        crc32_z                                 @175

; zlib1 v1.2.12 added:
		crc32_combine_gen						@176
		crc32_combine_gen64						@177
		crc32_combine_op						@178

#include <windows.h>

#define IDR_VERSION1  1
IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
  FILEVERSION	 1, 2, 12, 0
  PRODUCTVERSION 1, 2, 12, 0
  FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
  FILEFLAGS	0
  FILEOS	VOS_DOS_WINDOWS32
  FILETYPE	VFT_DLL
  FILESUBTYPE	0	// not used
BEGIN
  BLOCK "StringFileInfo"
  BEGIN
    BLOCK "040904E4"
    //language ID = U.S. English, char set = Windows, Multilingual

    BEGIN
      VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
      VALUE "FileVersion",	"1.2.12\0"
      VALUE "InternalName",	"zlib\0"
      VALUE "OriginalFilename",	"zlibwapi.dll\0"
      VALUE "ProductName",	"ZLib.DLL\0"
      VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
      VALUE "LegalCopyright", "(C) 1995-2022 Jean-loup Gailly & Mark Adler\0"
    END
  END
  BLOCK "VarFileInfo"
  BEGIN
    VALUE "Translation", 0x0409, 1252
  END
END

        inflateValidate                         @169
        uncompress2                             @170
        gzfread                                 @171
        gzfwrite                                @172
        deflateGetDictionary                    @173
        adler32_z                               @174
        crc32_z                                 @175

; zlib1 v1.2.12 added:
		crc32_combine_gen						@176
		crc32_combine_gen64						@177
		crc32_combine_op						@178

#include <windows.h>

#define IDR_VERSION1  1
IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
  FILEVERSION	 1, 2, 12, 0
  PRODUCTVERSION 1, 2, 12, 0
  FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
  FILEFLAGS	0
  FILEOS	VOS_DOS_WINDOWS32
  FILETYPE	VFT_DLL
  FILESUBTYPE	0	// not used
BEGIN
  BLOCK "StringFileInfo"
  BEGIN
    BLOCK "040904E4"
    //language ID = U.S. English, char set = Windows, Multilingual

    BEGIN
      VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
      VALUE "FileVersion",	"1.2.12\0"
      VALUE "InternalName",	"zlib\0"
      VALUE "OriginalFilename",	"zlibwapi.dll\0"
      VALUE "ProductName",	"ZLib.DLL\0"
      VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
      VALUE "LegalCopyright", "(C) 1995-2022 Jean-loup Gailly & Mark Adler\0"
    END
  END
  BLOCK "VarFileInfo"
  BEGIN
    VALUE "Translation", 0x0409, 1252
  END
END

        inflateValidate                         @169
        uncompress2                             @170
        gzfread                                 @171
        gzfwrite                                @172
        deflateGetDictionary                    @173
        adler32_z                               @174
        crc32_z                                 @175

; zlib1 v1.2.12 added:
		crc32_combine_gen						@176
		crc32_combine_gen64						@177
		crc32_combine_op						@178

/* crc32.c -- compute the CRC-32 of a data stream
 * Copyright (C) 1995-2022 Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 *
 * This interleaved implementation of a CRC makes use of pipelined multiple
 * arithmetic-logic units, commonly found in modern CPU cores. It is due to
 * Kadatch and Jenkins (2010). See doc/crc-doc.1.0.pdf in this distribution.


 */

/* @(#) $Id$ */

/*
  Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore
  protection on the static variables used to control the first-use generation
  of the crc tables. Therefore, if you #define DYNAMIC_CRC_TABLE, you should
  first call get_crc_table() to initialize the tables before allowing more than
  one thread to use crc32().

  MAKECRCH can be #defined to write out crc32.h. A main() routine is also
  produced, so that this one source file can be compiled to an executable.
 */

#ifdef MAKECRCH
#  include <stdio.h>
#  ifndef DYNAMIC_CRC_TABLE
#    define DYNAMIC_CRC_TABLE
#  endif /* !DYNAMIC_CRC_TABLE */
#endif /* MAKECRCH */

#include "zutil.h"      /* for Z_U4, Z_U8, z_crc_t, and FAR definitions */

 /*
  A CRC of a message is computed on N braids of words in the message, where
  each word consists of W bytes (4 or 8). If N is 3, for example, then three
  running sparse CRCs are calculated respectively on each braid, at these
  indices in the array of words: 0, 3, 6, ..., 1, 4, 7, ..., and 2, 5, 8, ...
  This is done starting at a word boundary, and continues until as many blocks
  of N * W bytes as are available have been processed. The results are combined
  into a single CRC at the end. For this code, N must be in the range 1..6 and
  W must be 4 or 8. The upper limit on N can be increased if desired by adding
  more #if blocks, extending the patterns apparent in the code. In addition,
  crc32.h would need to be regenerated, if the maximum N value is increased.

  N and W are chosen empirically by benchmarking the execution time on a given
  processor. The choices for N and W below were based on testing on Intel Kaby
  Lake i7, AMD Ryzen 7, ARM Cortex-A57, Sparc64-VII, PowerPC POWER9, and MIPS64
  Octeon II processors. The Intel, AMD, and ARM processors were all fastest
  with N=5, W=8. The Sparc, PowerPC, and MIPS64 were all fastest at N=5, W=4.
  They were all tested with either gcc or clang, all using the -O3 optimization
  level. Your mileage may vary.
 */

/* Define N */
#ifdef Z_TESTN
#  define N Z_TESTN
#else
#  define N 5
#endif
#if N < 1 || N > 6
#  error N must be in 1..6
#endif

/*
  z_crc_t must be at least 32 bits. z_word_t must be at least as long as
  z_crc_t. It is assumed here that z_word_t is either 32 bits or 64 bits, and
  that bytes are eight bits.
 */



/*
  Define W and the associated z_word_t type. If W is not defined, then a
  braided calculation is not used, and the associated tables and code are not
  compiled.
 */
#ifdef Z_TESTW
#  if Z_TESTW-1 != -1
#    define W Z_TESTW
#  endif
#else
#  ifdef MAKECRCH
#    define W 8         /* required for MAKECRCH */
#  else
#    if defined(__x86_64__) || defined(__aarch64__)
#      define W 8
#    else
#      define W 4
#    endif
#  endif
#endif
#ifdef W
#  if W == 8 && defined(Z_U8)
     typedef Z_U8 z_word_t;
#  elif defined(Z_U4)
#    undef W
#    define W 4
     typedef Z_U4 z_word_t;
#  else
#    undef W
#  endif
#endif

/* Local functions. */
local z_crc_t multmodp OF((z_crc_t a, z_crc_t b));
local z_crc_t x2nmodp OF((z_off64_t n, unsigned k));

/* If available, use the ARM processor CRC32 instruction. */
#if defined(__aarch64__) && defined(__ARM_FEATURE_CRC32) && W == 8
#  define ARMCRC32
#endif

#if defined(W) && (!defined(ARMCRC32) || defined(DYNAMIC_CRC_TABLE))
/*
  Swap the bytes in a z_word_t to convert between little and big endian. Any
  self-respecting compiler will optimize this to a single machine byte-swap
  instruction, if one is available. This assumes that word_t is either 32 bits
  or 64 bits.
 */
local z_word_t byte_swap(word)
    z_word_t word;
{
#  if W == 8
    return
        (word & 0xff00000000000000) >> 56 |
        (word & 0xff000000000000) >> 40 |
        (word & 0xff0000000000) >> 24 |
        (word & 0xff00000000) >> 8 |
        (word & 0xff000000) << 8 |
        (word & 0xff0000) << 24 |
        (word & 0xff00) << 40 |
        (word & 0xff) << 56;
#  else   /* W == 4 */
    return
        (word & 0xff000000) >> 24 |
        (word & 0xff0000) >> 8 |
        (word & 0xff00) << 8 |
        (word & 0xff) << 24;
#  endif
}
#endif

/* CRC polynomial. */
#define POLY 0xedb88320         /* p(x) reflected, with x^32 implied */

#ifdef DYNAMIC_CRC_TABLE


local z_crc_t FAR crc_table[256];
local z_crc_t FAR x2n_table[32];
local void make_crc_table OF((void));
#ifdef W
   local z_word_t FAR crc_big_table[256];
   local z_crc_t FAR crc_braid_table[W][256];
   local z_word_t FAR crc_braid_big_table[W][256];
   local void braid OF((z_crc_t [][256], z_word_t [][256], int, int));
#endif
#ifdef MAKECRCH
   local void write_table OF((FILE *, const z_crc_t FAR *, int));
   local void write_table32hi OF((FILE *, const z_word_t FAR *, int));
   local void write_table64 OF((FILE *, const z_word_t FAR *, int));
#endif /* MAKECRCH */

/*
  Define a once() function depending on the availability of atomics. If this is
  compiled with DYNAMIC_CRC_TABLE defined, and if CRCs will be computed in
  multiple threads, and if atomics are not available, then get_crc_table() must
  be called to initialize the tables and must return before any threads are
  allowed to compute or combine CRCs.
 */

/* Definition of once functionality. */
typedef struct once_s once_t;
local void once OF((once_t *, void (*)(void)));

/* Check for the availability of atomics. */
#if defined(__STDC__) && __STDC_VERSION__ >= 201112L && \
    !defined(__STDC_NO_ATOMICS__)

#include <stdatomic.h>

/* Structure for once(), which must be initialized with ONCE_INIT. */
struct once_s {
    atomic_flag begun;
    atomic_int done;
};
#define ONCE_INIT {ATOMIC_FLAG_INIT, 0}

/*
  Run the provided init() function exactly once, even if multiple threads
  invoke once() at the same time. The state must be a once_t initialized with
  ONCE_INIT.
 */
local void once(state, init)
    once_t *state;
    void (*init)(void);
{
    if (!atomic_load(&state->done)) {
        if (atomic_flag_test_and_set(&state->begun))
            while (!atomic_load(&state->done))
                ;
        else {
            init();
            atomic_store(&state->done, 1);
        }
    }
}

#else   /* no atomics */

/* Structure for once(), which must be initialized with ONCE_INIT. */
struct once_s {
    volatile int begun;
    volatile int done;
};
#define ONCE_INIT {0, 0}

/* Test and set. Alas, not atomic, but tries to minimize the period of
   vulnerability. */
local int test_and_set OF((int volatile *));
local int test_and_set(flag)
    int volatile *flag;
{
    int was;

    was = *flag;
    *flag = 1;
    return was;
}

/* Run the provided init() function once. This is not thread-safe. */
local void once(state, init)
    once_t *state;
    void (*init)(void);
{
    if (!state->done) {
        if (test_and_set(&state->begun))
            while (!state->done)
                ;
        else {
            init();
            state->done = 1;
        }
    }
}

#endif

/* State for once(). */
local once_t made = ONCE_INIT;

/*
  Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
  x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.

  Polynomials over GF(2) are represented in binary, one bit per coefficient,
  with the lowest powers in the most significant bit. Then adding polynomials
  is just exclusive-or, and multiplying a polynomial by x is a right shift by
  one. If we call the above polynomial p, and represent a byte as the
  polynomial q, also with the lowest power in the most significant bit (so the
  byte 0xb1 is the polynomial x^7+x^3+x^2+1), then the CRC is (q*x^32) mod p,
  where a mod b means the remainder after dividing a by b.

  This calculation is done using the shift-register method of multiplying and
  taking the remainder. The register is initialized to zero, and for each
  incoming bit, x^32 is added mod p to the register if the bit is a one (where
  x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by x
  (which is shifting right by one and adding x^32 mod p if the bit shifted out
  is a one). We start with the highest power (least significant bit) of q and
  repeat for all eight bits of q.

  The table is simply the CRC of all possible eight bit values. This is all the
  information needed to generate CRCs on data a byte at a time for all
  combinations of CRC register values and incoming bytes.


 */

local void make_crc_table()
{
    unsigned i, j, n;
    z_crc_t p;








    /* initialize the CRC of bytes tables */

    for (i = 0; i < 256; i++) {
        p = i;

        for (j = 0; j < 8; j++)


            p = p & 1 ? (p >> 1) ^ POLY : p >> 1;





        crc_table[i] = p;


#ifdef W



        crc_big_table[i] = byte_swap(p);







#endif
    }


    /* initialize the x^2^n mod p(x) table */
    p = (z_crc_t)1 << 30;         /* x^1 */

    x2n_table[0] = p;
    for (n = 1; n < 32; n++)
        x2n_table[n] = p = multmodp(p, p);


#ifdef W
    /* initialize the braiding tables -- needs x2n_table[] */
    braid(crc_braid_table, crc_braid_big_table, N, W);
#endif

#ifdef MAKECRCH

    {
        /*
          The crc32.h header file contains tables for both 32-bit and 64-bit
          z_word_t's, and so requires a 64-bit type be available. In that case,
          z_word_t must be defined to be 64-bits. This code then also generates
          and writes out the tables for the case that z_word_t is 32 bits.
         */
#if !defined(W) || W != 8
#  error Need a 64-bit integer type in order to generate crc32.h.
#endif
        FILE *out;
        int k, n;
        z_crc_t ltl[8][256];
        z_word_t big[8][256];

        out = fopen("crc32.h", "w");
        if (out == NULL) return;

        /* write out little-endian CRC table to crc32.h */
        fprintf(out,
            "/* crc32.h -- tables for rapid CRC calculation\n"
            " * Generated automatically by crc32.c\n */\n"
            "\n"
            "local const z_crc_t FAR crc_table[] = {\n"

            "    ");
        write_table(out, crc_table, 256);
        fprintf(out,
            "};\n");

        /* write out big-endian CRC table for 64-bit z_word_t to crc32.h */
        fprintf(out,
            "\n"
            "#ifdef W\n"
            "\n"
            "#if W == 8\n"
            "\n"
            "local const z_word_t FAR crc_big_table[] = {\n"
            "    ");
        write_table64(out, crc_big_table, 256);
        fprintf(out,
            "};\n");

        /* write out big-endian CRC table for 32-bit z_word_t to crc32.h */
        fprintf(out,
            "\n"
            "#else /* W == 4 */\n"
            "\n"
            "local const z_word_t FAR crc_big_table[] = {\n"
            "    ");
        write_table32hi(out, crc_big_table, 256);
        fprintf(out,
            "};\n"
            "\n"
            "#endif\n");

        /* write out braid tables for each value of N */
        for (n = 1; n <= 6; n++) {
            fprintf(out,
            "\n"
            "#if N == %d\n", n);

            /* compute braid tables for this N and 64-bit word_t */
            braid(ltl, big, n, 8);

            /* write out braid tables for 64-bit z_word_t to crc32.h */
            fprintf(out,
            "\n"
            "#if W == 8\n"
            "\n"
            "local const z_crc_t FAR crc_braid_table[][256] = {\n");
            for (k = 0; k < 8; k++) {
                fprintf(out, "   {");
                write_table(out, ltl[k], 256);
                fprintf(out, "}%s", k < 7 ? ",\n" : "");
            }
            fprintf(out,
            "};\n"
            "\n"
            "local const z_word_t FAR crc_braid_big_table[][256] = {\n");
            for (k = 0; k < 8; k++) {
                fprintf(out, "   {");
                write_table64(out, big[k], 256);
                fprintf(out, "}%s", k < 7 ? ",\n" : "");
            }
            fprintf(out,
            "};\n");

            /* compute braid tables for this N and 32-bit word_t */
            braid(ltl, big, n, 4);

            /* write out braid tables for 32-bit z_word_t to crc32.h */
            fprintf(out,
            "\n"
            "#else /* W == 4 */\n"
            "\n"
            "local const z_crc_t FAR crc_braid_table[][256] = {\n");
            for (k = 0; k < 4; k++) {
                fprintf(out, "   {");
                write_table(out, ltl[k], 256);
                fprintf(out, "}%s", k < 3 ? ",\n" : "");
            }
            fprintf(out,
            "};\n"
            "\n"
            "local const z_word_t FAR crc_braid_big_table[][256] = {\n");
            for (k = 0; k < 4; k++) {
                fprintf(out, "   {");
                write_table32hi(out, big[k], 256);
                fprintf(out, "}%s", k < 3 ? ",\n" : "");
            }
            fprintf(out,
            "};\n"
            "\n"
            "#endif\n"
            "\n"
            "#endif\n");
        }
        fprintf(out,
            "\n"
            "#endif\n");

        /* write out zeros operator table to crc32.h */
        fprintf(out,
            "\n"
            "local const z_crc_t FAR x2n_table[] = {\n"
            "    ");
        write_table(out, x2n_table, 32);
        fprintf(out,
            "};\n");
        fclose(out);
    }
#endif /* MAKECRCH */
}

#ifdef MAKECRCH

/*
   Write the 32-bit values in table[0..k-1] to out, five per line in
   hexadecimal separated by commas.
 */
local void write_table(out, table, k)
    FILE *out;
    const z_crc_t FAR *table;
    int k;
{
    int n;

    for (n = 0; n < k; n++)
        fprintf(out, "%s0x%08lx%s", n == 0 || n % 5 ? "" : "    ",
                (unsigned long)(table[n]),
                n == k - 1 ? "" : (n % 5 == 4 ? ",\n" : ", "));
}

/*
   Write the high 32-bits of each value in table[0..k-1] to out, five per line
   in hexadecimal separated by commas.
 */
local void write_table32hi(out, table, k)
FILE *out;
const z_word_t FAR *table;
int k;
{
    int n;

    for (n = 0; n < k; n++)
        fprintf(out, "%s0x%08lx%s", n == 0 || n % 5 ? "" : "    ",
                (unsigned long)(table[n] >> 32),
                n == k - 1 ? "" : (n % 5 == 4 ? ",\n" : ", "));
}

/*
  Write the 64-bit values in table[0..k-1] to out, three per line in
  hexadecimal separated by commas. This assumes that if there is a 64-bit
  type, then there is also a long long integer type, and it is at least 64
  bits. If not, then the type cast and format string can be adjusted
  accordingly.
 */
local void write_table64(out, table, k)
    FILE *out;
    const z_word_t FAR *table;
    int k;
{
    int n;

    for (n = 0; n < k; n++)
        fprintf(out, "%s0x%016llx%s", n == 0 || n % 3 ? "" : "    ",
                (unsigned long long)(table[n]),
                n == k - 1 ? "" : (n % 3 == 2 ? ",\n" : ", "));
}

/* Actually do the deed. */
int main()
{
    make_crc_table();
    return 0;
}

#endif /* MAKECRCH */

#ifdef W
/*
  Generate the little and big-endian braid tables for the given n and z_word_t
  size w. Each array must have room for w blocks of 256 elements.
 */
local void braid(ltl, big, n, w)
    z_crc_t ltl[][256];
    z_word_t big[][256];
    int n;
    int w;
{
    int k;
    z_crc_t i, p, q;
    for (k = 0; k < w; k++) {
        p = x2nmodp((n * w + 3 - k) << 3, 0);
        ltl[k][0] = 0;
        big[w - 1 - k][0] = 0;
        for (i = 1; i < 256; i++) {
            ltl[k][i] = q = multmodp(i << 24, p);
            big[w - 1 - k][i] = byte_swap(q);
        }
    }
}
#endif

#else /* !DYNAMIC_CRC_TABLE */
/* ========================================================================
 * Tables for byte-wise and braided CRC-32 calculations, and a table of powers
 * of x for combining CRC-32s, all made by make_crc_table().
 */
#include "crc32.h"
#endif /* DYNAMIC_CRC_TABLE */

/* ========================================================================
 * Routines used for CRC calculation. Some are also required for the table
 * generation above.
 */

/*
  Return a(x) multiplied by b(x) modulo p(x), where p(x) is the CRC polynomial,
  reflected. For speed, this requires that a not be zero.
 */
local z_crc_t multmodp(a, b)
    z_crc_t a;
    z_crc_t b;
{
    z_crc_t m, p;

    m = (z_crc_t)1 << 31;
    p = 0;
    for (;;) {
        if (a & m) {
            p ^= b;
            if ((a & (m - 1)) == 0)
                break;
        }
        m >>= 1;
        b = b & 1 ? (b >> 1) ^ POLY : b >> 1;
    }
    return p;
}

/*
  Return x^(n * 2^k) modulo p(x). Requires that x2n_table[] has been
  initialized.
 */
local z_crc_t x2nmodp(n, k)
    z_off64_t n;
    unsigned k;
{
    z_crc_t p;

    p = (z_crc_t)1 << 31;           /* x^0 == 1 */
    while (n) {
        if (n & 1)
            p = multmodp(x2n_table[k & 31], p);
        n >>= 1;
        k++;
    }
    return p;
}

/* =========================================================================
 * This function can be used by asm versions of crc32(), and to force the
 * generation of the CRC tables in a threaded application.
 */
const z_crc_t FAR * ZEXPORT get_crc_table()
{
#ifdef DYNAMIC_CRC_TABLE

    once(&made, make_crc_table);
#endif /* DYNAMIC_CRC_TABLE */
    return (const z_crc_t FAR *)crc_table;
}

/* =========================================================================
 * Use ARM machine instructions if available. This will compute the CRC about
 * ten times faster than the braided calculation. This code does not check for
 * the presence of the CRC instruction at run time. __ARM_FEATURE_CRC32 will
 * only be defined if the compilation specifies an ARM processor architecture
 * that has the instructions. For example, compiling with -march=armv8.1-a or
 * -march=armv8-a+crc, or -march=native if the compile machine has the crc32
 * instructions.
 */
#ifdef ARMCRC32

/*
   Constants empirically determined to maximize speed. These values are from
   measurements on a Cortex-A57. Your mileage may vary.
 */
#define Z_BATCH 3990                /* number of words in a batch */
#define Z_BATCH_ZEROS 0xa10d3d0c    /* computed from Z_BATCH = 3990 */
#define Z_BATCH_MIN 800             /* fewest words in a final batch */

unsigned long ZEXPORT crc32_z(crc, buf, len)
    unsigned long crc;
    const unsigned char FAR *buf;
    z_size_t len;
{
    z_crc_t val;
    z_word_t crc1, crc2;
    const z_word_t *word;
    z_word_t val0, val1, val2;
    z_size_t last, last2, i;
    z_size_t num;

    /* Return initial CRC, if requested. */
    if (buf == Z_NULL) return 0;

#ifdef DYNAMIC_CRC_TABLE
    once(&made, make_crc_table);
#endif /* DYNAMIC_CRC_TABLE */

    /* Pre-condition the CRC */
    crc ^= 0xffffffff;

    /* Compute the CRC up to a word boundary. */
    while (len && ((z_size_t)buf & 7) != 0) {
        len--;
        val = *buf++;
        __asm__ volatile("crc32b %w0, %w0, %w1" : "+r"(crc) : "r"(val));
    }

    /* Prepare to compute the CRC on full 64-bit words word[0..num-1]. */
    word = (z_word_t const *)buf;
    num = len >> 3;
    len &= 7;

    /* Do three interleaved CRCs to realize the throughput of one crc32x
       instruction per cycle. Each CRC is calcuated on Z_BATCH words. The three
       CRCs are combined into a single CRC after each set of batches. */
    while (num >= 3 * Z_BATCH) {
        crc1 = 0;
        crc2 = 0;
        for (i = 0; i < Z_BATCH; i++) {
            val0 = word[i];
            val1 = word[i + Z_BATCH];
            val2 = word[i + 2 * Z_BATCH];
            __asm__ volatile("crc32x %w0, %w0, %x1" : "+r"(crc) : "r"(val0));
            __asm__ volatile("crc32x %w0, %w0, %x1" : "+r"(crc1) : "r"(val1));
            __asm__ volatile("crc32x %w0, %w0, %x1" : "+r"(crc2) : "r"(val2));
        }
        word += 3 * Z_BATCH;
        num -= 3 * Z_BATCH;
        crc = multmodp(Z_BATCH_ZEROS, crc) ^ crc1;
        crc = multmodp(Z_BATCH_ZEROS, crc) ^ crc2;
    }

    /* Do one last smaller batch with the remaining words, if there are enough
       to pay for the combination of CRCs. */
    last = num / 3;
    if (last >= Z_BATCH_MIN) {
        last2 = last << 1;
        crc1 = 0;
        crc2 = 0;
        for (i = 0; i < last; i++) {
            val0 = word[i];
            val1 = word[i + last];
            val2 = word[i + last2];
            __asm__ volatile("crc32x %w0, %w0, %x1" : "+r"(crc) : "r"(val0));
            __asm__ volatile("crc32x %w0, %w0, %x1" : "+r"(crc1) : "r"(val1));
            __asm__ volatile("crc32x %w0, %w0, %x1" : "+r"(crc2) : "r"(val2));
        }
        word += 3 * last;
        num -= 3 * last;
        val = x2nmodp(last, 6);
        crc = multmodp(val, crc) ^ crc1;
        crc = multmodp(val, crc) ^ crc2;
    }

    /* Compute the CRC on any remaining words. */
    for (i = 0; i < num; i++) {
        val0 = word[i];
        __asm__ volatile("crc32x %w0, %w0, %x1" : "+r"(crc) : "r"(val0));
    }
    word += num;

    /* Complete the CRC on any remaining bytes. */
    buf = (const unsigned char FAR *)word;
    while (len) {
        len--;
        val = *buf++;
        __asm__ volatile("crc32b %w0, %w0, %w1" : "+r"(crc) : "r"(val));
    }

    /* Return the CRC, post-conditioned. */
    return crc ^ 0xffffffff;
}

#else

#ifdef W

/*
  Return the CRC of the W bytes in the word_t data, taking the
  least-significant byte of the word as the first byte of data, without any pre
  or post conditioning. This is used to combine the CRCs of each braid.
 */
local z_crc_t crc_word(data)
    z_word_t data;
{
    int k;
    for (k = 0; k < W; k++)
        data = (data >> 8) ^ crc_table[data & 0xff];
    return (z_crc_t)data;
}

local z_word_t crc_word_big(data)
    z_word_t data;
{
    int k;
    for (k = 0; k < W; k++)
        data = (data << 8) ^
            crc_big_table[(data >> ((W - 1) << 3)) & 0xff];
    return data;
}

#endif

/* ========================================================================= */
unsigned long ZEXPORT crc32_z(crc, buf, len)
    unsigned long crc;
    const unsigned char FAR *buf;
    z_size_t len;
{
    /* Return initial CRC, if requested. */
    if (buf == Z_NULL) return 0;

#ifdef DYNAMIC_CRC_TABLE

    once(&made, make_crc_table);
#endif /* DYNAMIC_CRC_TABLE */

    /* Pre-condition the CRC */
    crc ^= 0xffffffff;

#ifdef W

    /* If provided enough bytes, do a braided CRC calculation. */
    if (len >= N * W + W - 1) {
        z_size_t blks;
        z_word_t const *words;
        unsigned endian;
        int k;

        /* Compute the CRC up to a z_word_t boundary. */
        while (len && ((z_size_t)buf & (W - 1)) != 0) {
            len--;
            crc = (crc >> 8) ^ crc_table[(crc ^ *buf++) & 0xff];
        }

        /* Compute the CRC on as many N z_word_t blocks as are available. */
        blks = len / (N * W);
        len -= blks * N * W;
        words = (z_word_t const *)buf;

        /* Do endian check at execution time instead of compile time, since ARM
           processors can change the endianess at execution time. If the
           compiler knows what the endianess will be, it can optimize out the
           check and the unused branch. */
        endian = 1;
        if (*(unsigned char *)&endian) {
            /* Little endian. */

            z_crc_t crc0;
            z_word_t word0;
#if N > 1
            z_crc_t crc1;
            z_word_t word1;
#if N > 2
            z_crc_t crc2;
            z_word_t word2;
#if N > 3
            z_crc_t crc3;
            z_word_t word3;
#if N > 4
            z_crc_t crc4;
            z_word_t word4;
#if N > 5
            z_crc_t crc5;
            z_word_t word5;
#endif
#endif
#endif
#endif
#endif

            /* Initialize the CRC for each braid. */
            crc0 = crc;
#if N > 1
            crc1 = 0;
#if N > 2
            crc2 = 0;
#if N > 3
            crc3 = 0;
#if N > 4
            crc4 = 0;
#if N > 5
            crc5 = 0;
#endif
#endif
#endif
#endif
#endif

            /*
              Process the first blks-1 blocks, computing the CRCs on each braid
              independently.
             */
            while (--blks) {
                /* Load the word for each braid into registers. */
                word0 = crc0 ^ words[0];
#if N > 1
                word1 = crc1 ^ words[1];
#if N > 2
                word2 = crc2 ^ words[2];
#if N > 3
                word3 = crc3 ^ words[3];
#if N > 4
                word4 = crc4 ^ words[4];
#if N > 5
                word5 = crc5 ^ words[5];
#endif
#endif
#endif
#endif
#endif
                words += N;

                /* Compute and update the CRC for each word. The loop should
                   get unrolled. */
                crc0 = crc_braid_table[0][word0 & 0xff];
#if N > 1
                crc1 = crc_braid_table[0][word1 & 0xff];
#if N > 2
                crc2 = crc_braid_table[0][word2 & 0xff];
#if N > 3
                crc3 = crc_braid_table[0][word3 & 0xff];
#if N > 4
                crc4 = crc_braid_table[0][word4 & 0xff];
#if N > 5
                crc5 = crc_braid_table[0][word5 & 0xff];
#endif
#endif
#endif
#endif
#endif
                for (k = 1; k < W; k++) {
                    crc0 ^= crc_braid_table[k][(word0 >> (k << 3)) & 0xff];
#if N > 1
                    crc1 ^= crc_braid_table[k][(word1 >> (k << 3)) & 0xff];
#if N > 2
                    crc2 ^= crc_braid_table[k][(word2 >> (k << 3)) & 0xff];
#if N > 3
                    crc3 ^= crc_braid_table[k][(word3 >> (k << 3)) & 0xff];
#if N > 4
                    crc4 ^= crc_braid_table[k][(word4 >> (k << 3)) & 0xff];
#if N > 5
                    crc5 ^= crc_braid_table[k][(word5 >> (k << 3)) & 0xff];
#endif
#endif
#endif
#endif
#endif
                }
            }

            /*
              Process the last block, combining the CRCs of the N braids at the
              same time.
             */
            crc = crc_word(crc0 ^ words[0]);
#if N > 1
            crc = crc_word(crc1 ^ words[1] ^ crc);
#if N > 2
            crc = crc_word(crc2 ^ words[2] ^ crc);
#if N > 3
            crc = crc_word(crc3 ^ words[3] ^ crc);
#if N > 4
            crc = crc_word(crc4 ^ words[4] ^ crc);
#if N > 5
            crc = crc_word(crc5 ^ words[5] ^ crc);
#endif
#endif
#endif
#endif
#endif
            words += N;
        }
        else {
            /* Big endian. */

            z_word_t crc0, word0, comb;
#if N > 1
            z_word_t crc1, word1;
#if N > 2
            z_word_t crc2, word2;
#if N > 3
            z_word_t crc3, word3;
#if N > 4
            z_word_t crc4, word4;
#if N > 5
            z_word_t crc5, word5;
#endif
#endif
#endif
#endif
#endif

            /* Initialize the CRC for each braid. */
            crc0 = byte_swap(crc);
#if N > 1
            crc1 = 0;
#if N > 2
            crc2 = 0;
#if N > 3
            crc3 = 0;
#if N > 4
            crc4 = 0;
#if N > 5
            crc5 = 0;
#endif
#endif
#endif
#endif
#endif

            /*
              Process the first blks-1 blocks, computing the CRCs on each braid
              independently.
             */
            while (--blks) {
                /* Load the word for each braid into registers. */
                word0 = crc0 ^ words[0];
#if N > 1
                word1 = crc1 ^ words[1];
#if N > 2
                word2 = crc2 ^ words[2];
#if N > 3
                word3 = crc3 ^ words[3];
#if N > 4
                word4 = crc4 ^ words[4];
#if N > 5
                word5 = crc5 ^ words[5];
#endif
#endif
#endif
#endif
#endif
                words += N;

                /* Compute and update the CRC for each word. The loop should
                   get unrolled. */
                crc0 = crc_braid_big_table[0][word0 & 0xff];
#if N > 1
                crc1 = crc_braid_big_table[0][word1 & 0xff];
#if N > 2
                crc2 = crc_braid_big_table[0][word2 & 0xff];
#if N > 3
                crc3 = crc_braid_big_table[0][word3 & 0xff];
#if N > 4
                crc4 = crc_braid_big_table[0][word4 & 0xff];
#if N > 5
                crc5 = crc_braid_big_table[0][word5 & 0xff];
#endif
#endif
#endif
#endif
#endif
                for (k = 1; k < W; k++) {
                    crc0 ^= crc_braid_big_table[k][(word0 >> (k << 3)) & 0xff];
#if N > 1
                    crc1 ^= crc_braid_big_table[k][(word1 >> (k << 3)) & 0xff];
#if N > 2
                    crc2 ^= crc_braid_big_table[k][(word2 >> (k << 3)) & 0xff];
#if N > 3
                    crc3 ^= crc_braid_big_table[k][(word3 >> (k << 3)) & 0xff];
#if N > 4
                    crc4 ^= crc_braid_big_table[k][(word4 >> (k << 3)) & 0xff];
#if N > 5
                    crc5 ^= crc_braid_big_table[k][(word5 >> (k << 3)) & 0xff];
#endif
#endif
#endif
#endif
#endif
                }
            }

            /*
              Process the last block, combining the CRCs of the N braids at the
              same time.
             */
            comb = crc_word_big(crc0 ^ words[0]);
#if N > 1
            comb = crc_word_big(crc1 ^ words[1] ^ comb);
#if N > 2
            comb = crc_word_big(crc2 ^ words[2] ^ comb);
#if N > 3
            comb = crc_word_big(crc3 ^ words[3] ^ comb);
#if N > 4
            comb = crc_word_big(crc4 ^ words[4] ^ comb);
#if N > 5
            comb = crc_word_big(crc5 ^ words[5] ^ comb);
#endif
#endif
#endif
#endif
#endif
            words += N;
            crc = byte_swap(comb);
        }

        /*
          Update the pointer to the remaining bytes to process.
         */
        buf = (unsigned char const *)words;
    }

#endif /* W */

    /* Complete the computation of the CRC on any remaining bytes. */
    while (len >= 8) {

        len -= 8;
        crc = (crc >> 8) ^ crc_table[(crc ^ *buf++) & 0xff];
        crc = (crc >> 8) ^ crc_table[(crc ^ *buf++) & 0xff];
        crc = (crc >> 8) ^ crc_table[(crc ^ *buf++) & 0xff];
        crc = (crc >> 8) ^ crc_table[(crc ^ *buf++) & 0xff];
        crc = (crc >> 8) ^ crc_table[(crc ^ *buf++) & 0xff];
        crc = (crc >> 8) ^ crc_table[(crc ^ *buf++) & 0xff];
        crc = (crc >> 8) ^ crc_table[(crc ^ *buf++) & 0xff];
        crc = (crc >> 8) ^ crc_table[(crc ^ *buf++) & 0xff];
    }
    while (len) {
        len--;
        crc = (crc >> 8) ^ crc_table[(crc ^ *buf++) & 0xff];
    }


    /* Return the CRC, post-conditioned. */
    return crc ^ 0xffffffff;
}

#endif

/* ========================================================================= */
unsigned long ZEXPORT crc32(crc, buf, len)
    unsigned long crc;
    const unsigned char FAR *buf;
    uInt len;
{
    return crc32_z(crc, buf, len);
}















/* ========================================================================= */
















































































































uLong ZEXPORT crc32_combine64(crc1, crc2, len2)
    uLong crc1;
    uLong crc2;
    z_off64_t len2;
{




#ifdef DYNAMIC_CRC_TABLE



    once(&made, make_crc_table);







#endif /* DYNAMIC_CRC_TABLE */






























    return multmodp(x2nmodp(len2, 3), crc1) ^ crc2;
}

/* ========================================================================= */
uLong ZEXPORT crc32_combine(crc1, crc2, len2)
    uLong crc1;
    uLong crc2;
    z_off_t len2;
{
    return crc32_combine64(crc1, crc2, len2);
}

/* ========================================================================= */
uLong ZEXPORT crc32_combine_gen64(len2)
    z_off64_t len2;
{
#ifdef DYNAMIC_CRC_TABLE
    once(&made, make_crc_table);
#endif /* DYNAMIC_CRC_TABLE */
    return x2nmodp(len2, 3);
}

/* ========================================================================= */
uLong ZEXPORT crc32_combine_gen(len2)
    z_off_t len2;
{
    return crc32_combine_gen64(len2);
}

/* ========================================================================= */
uLong crc32_combine_op(crc1, crc2, op)
    uLong crc1;
    uLong crc2;

    uLong op;
{
    return multmodp(op, crc1) ^ crc2;
}