Fossil

  if( pStmt && sqlite3_step(pStmt)==SQLITE_ROW ){
    res = sqlite3_column_int(pStmt,0);
  }
  sqlite3_finalize(pStmt);
  return res;
}

#if defined(SQLITE_SHELL_HAVE_RECOVER)
/*
** Convert a 2-byte or 4-byte big-endian integer into a native integer
*/
static unsigned int get2byteInt(unsigned char *a){
  return (a[0]<<8) + a[1];
}
static unsigned int get4byteInt(unsigned char *a){

**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.41.0"
#define SQLITE_VERSION_NUMBER 3041000
#define SQLITE_SOURCE_ID      "2023-02-21 18:09:37 05941c2a04037fc3ed2ffae11f5d2260706f89431f463518740f72ada350866d"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros

** file to the database file.
**
** <li>[[SQLITE_FCNTL_CKPT_DONE]]
** The [SQLITE_FCNTL_CKPT_DONE] opcode is invoked from within a checkpoint
** in wal mode after the client has finished copying pages from the wal
** file to the database file, but before the *-shm file is updated to
** record the fact that the pages have been checkpointed.

**
** <li>[[SQLITE_FCNTL_EXTERNAL_READER]]
** The EXPERIMENTAL [SQLITE_FCNTL_EXTERNAL_READER] opcode is used to detect
** whether or not there is a database client in another process with a wal-mode
** transaction open on the database or not. It is only available on unix.The
** (void*) argument passed with this file-control should be a pointer to a
** value of type (int). The integer value is set to 1 if the database is a wal
** mode database and there exists at least one client in another process that
** currently has an SQL transaction open on the database. It is set to 0 if
** the database is not a wal-mode db, or if there is no such connection in any
** other process. This opcode cannot be used to detect transactions opened
** by clients within the current process, only within other processes.

**
** <li>[[SQLITE_FCNTL_CKSM_FILE]]
** The [SQLITE_FCNTL_CKSM_FILE] opcode is for use interally by the
** [checksum VFS shim] only.
**
** <li>[[SQLITE_FCNTL_RESET_CACHE]]
** If there is currently no transaction open on the database, and the
** database is not a temp db, then the [SQLITE_FCNTL_RESET_CACHE] file-control
** purges the contents of the in-memory page cache. If there is an open
** transaction, or if the db is a temp-db, this opcode is a no-op, not an error.
** </ul>
*/
#define SQLITE_FCNTL_LOCKSTATE               1
#define SQLITE_FCNTL_GET_LOCKPROXYFILE       2
#define SQLITE_FCNTL_SET_LOCKPROXYFILE       3
#define SQLITE_FCNTL_LAST_ERRNO              4
#define SQLITE_FCNTL_SIZE_HINT               5

** description for the X-th loop.
**
** [[SQLITE_SCANSTAT_SELECTID]] <dt>SQLITE_SCANSTAT_SELECTID</dt>
** <dd>^The "int" variable pointed to by the V parameter will be set to the
** id for the X-th query plan element. The id value is unique within the
** statement. The select-id is the same value as is output in the first
** column of an [EXPLAIN QUERY PLAN] query.

**
** [[SQLITE_SCANSTAT_PARENTID]] <dt>SQLITE_SCANSTAT_PARENTID</dt>
** <dd>The "int" variable pointed to by the V parameter will be set to the
** the id of the parent of the current query element, if applicable, or
** to zero if the query element has no parent. This is the same value as
** returned in the second column of an [EXPLAIN QUERY PLAN] query.
**
** [[SQLITE_SCANSTAT_NCYCLE]] <dt>SQLITE_SCANSTAT_NCYCLE</dt>
** <dd>The sqlite3_int64 output value is set to the number of cycles,
** according to the processor time-stamp counter, that elapsed while the
** query element was being processed. This value is not available for
** all query elements - if it is unavailable the output variable is
** set to -1.
** </dl>
*/
#define SQLITE_SCANSTAT_NLOOP    0
#define SQLITE_SCANSTAT_NVISIT   1
#define SQLITE_SCANSTAT_EST      2
#define SQLITE_SCANSTAT_NAME     3
#define SQLITE_SCANSTAT_EXPLAIN  4
#define SQLITE_SCANSTAT_SELECTID 5

** or any operation on a WITHOUT ROWID table, the value of the sixth
** parameter is undefined. For an INSERT or UPDATE on a rowid table the
** seventh parameter is the final rowid value of the row being inserted
** or updated. The value of the seventh parameter passed to the callback
** function is not defined for operations on WITHOUT ROWID tables, or for
** DELETE operations on rowid tables.
**
** ^The sqlite3_preupdate_hook(D,C,P) function returns the P argument from
** the previous call on the same [database connection] D, or NULL for
** the first call on D.
**
** The [sqlite3_preupdate_old()], [sqlite3_preupdate_new()],
** [sqlite3_preupdate_count()], and [sqlite3_preupdate_depth()] interfaces
** provide additional information about a preupdate event. These routines
** may only be called from within a preupdate callback.  Invoking any of

  int pcx;

#ifdef SQLITE_DEBUG
  if( pOp->p2==OE_Abort ){ sqlite3VdbeAssertAbortable(p); }
#endif

  /* A deliberately coded "OP_Halt SQLITE_INTERNAL * * * *" opcode indicates
  ** something is wrong with the code generator.  Raise an assertion in order
  ** to bring this to the attention of fuzzers and other testing tools. */
  assert( pOp->p1!=SQLITE_INTERNAL );

  if( p->pFrame && pOp->p1==SQLITE_OK ){
    /* Halt the sub-program. Return control to the parent frame. */
    pFrame = p->pFrame;
    p->pFrame = pFrame->pParent;

  sqlite3_value **argv
){
  const u8 *zPass = (const u8*)"";
  int nPass = 0;
  const u8 *zHex = sqlite3_value_text(argv[0]);
  int nHex = sqlite3_value_bytes(argv[0]);
#ifdef SQLITE_DEBUG
  const u8 *zEnd = zHex ? &zHex[nHex] : 0;
#endif
  u8 *pBlob = 0;
  u8 *p = 0;

  assert( argc==1 || argc==2 );
  if( argc==2 ){
    zPass = sqlite3_value_text(argv[1]);

  pExpr = p->pEList->a[0].pExpr;
  if( pExpr->op!=TK_AGG_FUNCTION ) return 0;        /* Result is an aggregate */
  assert( ExprUseUToken(pExpr) );
  if( sqlite3_stricmp(pExpr->u.zToken,"count") ) return 0;  /* Is count() */
  assert( ExprUseXList(pExpr) );
  if( pExpr->x.pList!=0 ) return 0;                 /* Must be count(*) */
  if( p->pSrc->nSrc!=1 ) return 0;                  /* One table in FROM  */
  if( ExprHasProperty(pExpr, EP_WinFunc) ) return 0;/* Not a window function */
  pSub = p->pSrc->a[0].pSelect;
  if( pSub==0 ) return 0;                           /* The FROM is a subquery */
  if( pSub->pPrior==0 ) return 0;                   /* Must be a compound ry */
  do{
    if( pSub->op!=TK_ALL && pSub->pPrior ) return 0;  /* Must be UNION ALL */
    if( pSub->pWhere ) return 0;                      /* No WHERE clause */
    if( pSub->pLimit ) return 0;                      /* No LIMIT clause */

        sortOut = sqlite3GetTempReg(pParse);
        sqlite3VdbeAddOp3(v, OP_OpenPseudo, sortPTab, sortOut, nCol);
        sqlite3VdbeAddOp2(v, OP_SorterSort, pAggInfo->sortingIdx, addrEnd);
        VdbeComment((v, "GROUP BY sort")); VdbeCoverage(v);
        pAggInfo->useSortingIdx = 1;
      }

      /* If there are entries in pAgggInfo->aFunc[] that contain subexpressions
      ** that are indexed (and that were previously identified and tagged
      ** in optimizeAggregateUseOfIndexedExpr()) then those subexpressions
      ** must now be converted into a TK_AGG_COLUMN node so that the value
      ** is correctly pulled from the index rather than being recomputed. */
      if( pParse->pIdxEpr ){
        aggregateConvertIndexedExprRefToColumn(pAggInfo);
#if TREETRACE_ENABLED

    nEst = nRow0;
    rc = whereEqualScanEst(pParse, pBuilder, pList->a[i].pExpr, &nEst);
    nRowEst += nEst;
    pBuilder->nRecValid = nRecValid;
  }

  if( rc==SQLITE_OK ){
    if( nRowEst > (tRowcnt)nRow0 ) nRowEst = nRow0;
    *pnRow = nRowEst;
    WHERETRACE(0x20,("IN row estimate: est=%d\n", nRowEst));
  }
  assert( pBuilder->nRecValid==nRecValid );
  return rc;
}
#endif /* SQLITE_ENABLE_STAT4 */

static void fts5SourceIdFunc(
  sqlite3_context *pCtx,          /* Function call context */
  int nArg,                       /* Number of args */
  sqlite3_value **apUnused        /* Function arguments */
){
  assert( nArg==0 );
  UNUSED_PARAM2(nArg, apUnused);
  sqlite3_result_text(pCtx, "fts5: 2023-02-21 18:09:37 05941c2a04037fc3ed2ffae11f5d2260706f89431f463518740f72ada350866d", -1, SQLITE_TRANSIENT);
}

/*
** Return true if zName is the extension on one of the shadow tables used
** by this module.
*/
static int fts5ShadowName(const char *zName){

**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.41.0"
#define SQLITE_VERSION_NUMBER 3041000
#define SQLITE_SOURCE_ID      "2023-02-21 18:09:37 05941c2a04037fc3ed2ffae11f5d2260706f89431f463518740f72ada350866d"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros

** file to the database file.
**
** <li>[[SQLITE_FCNTL_CKPT_DONE]]
** The [SQLITE_FCNTL_CKPT_DONE] opcode is invoked from within a checkpoint
** in wal mode after the client has finished copying pages from the wal
** file to the database file, but before the *-shm file is updated to
** record the fact that the pages have been checkpointed.

**
** <li>[[SQLITE_FCNTL_EXTERNAL_READER]]
** The EXPERIMENTAL [SQLITE_FCNTL_EXTERNAL_READER] opcode is used to detect
** whether or not there is a database client in another process with a wal-mode
** transaction open on the database or not. It is only available on unix.The
** (void*) argument passed with this file-control should be a pointer to a
** value of type (int). The integer value is set to 1 if the database is a wal
** mode database and there exists at least one client in another process that
** currently has an SQL transaction open on the database. It is set to 0 if
** the database is not a wal-mode db, or if there is no such connection in any
** other process. This opcode cannot be used to detect transactions opened
** by clients within the current process, only within other processes.

**
** <li>[[SQLITE_FCNTL_CKSM_FILE]]
** The [SQLITE_FCNTL_CKSM_FILE] opcode is for use interally by the
** [checksum VFS shim] only.
**
** <li>[[SQLITE_FCNTL_RESET_CACHE]]
** If there is currently no transaction open on the database, and the
** database is not a temp db, then the [SQLITE_FCNTL_RESET_CACHE] file-control
** purges the contents of the in-memory page cache. If there is an open
** transaction, or if the db is a temp-db, this opcode is a no-op, not an error.
** </ul>
*/
#define SQLITE_FCNTL_LOCKSTATE               1
#define SQLITE_FCNTL_GET_LOCKPROXYFILE       2
#define SQLITE_FCNTL_SET_LOCKPROXYFILE       3
#define SQLITE_FCNTL_LAST_ERRNO              4
#define SQLITE_FCNTL_SIZE_HINT               5

** description for the X-th loop.
**
** [[SQLITE_SCANSTAT_SELECTID]] <dt>SQLITE_SCANSTAT_SELECTID</dt>
** <dd>^The "int" variable pointed to by the V parameter will be set to the
** id for the X-th query plan element. The id value is unique within the
** statement. The select-id is the same value as is output in the first
** column of an [EXPLAIN QUERY PLAN] query.

**
** [[SQLITE_SCANSTAT_PARENTID]] <dt>SQLITE_SCANSTAT_PARENTID</dt>
** <dd>The "int" variable pointed to by the V parameter will be set to the
** the id of the parent of the current query element, if applicable, or
** to zero if the query element has no parent. This is the same value as
** returned in the second column of an [EXPLAIN QUERY PLAN] query.
**
** [[SQLITE_SCANSTAT_NCYCLE]] <dt>SQLITE_SCANSTAT_NCYCLE</dt>
** <dd>The sqlite3_int64 output value is set to the number of cycles,
** according to the processor time-stamp counter, that elapsed while the
** query element was being processed. This value is not available for
** all query elements - if it is unavailable the output variable is
** set to -1.
** </dl>
*/
#define SQLITE_SCANSTAT_NLOOP    0
#define SQLITE_SCANSTAT_NVISIT   1
#define SQLITE_SCANSTAT_EST      2
#define SQLITE_SCANSTAT_NAME     3
#define SQLITE_SCANSTAT_EXPLAIN  4
#define SQLITE_SCANSTAT_SELECTID 5

** or any operation on a WITHOUT ROWID table, the value of the sixth
** parameter is undefined. For an INSERT or UPDATE on a rowid table the
** seventh parameter is the final rowid value of the row being inserted
** or updated. The value of the seventh parameter passed to the callback
** function is not defined for operations on WITHOUT ROWID tables, or for
** DELETE operations on rowid tables.
**
** ^The sqlite3_preupdate_hook(D,C,P) function returns the P argument from
** the previous call on the same [database connection] D, or NULL for
** the first call on D.
**
** The [sqlite3_preupdate_old()], [sqlite3_preupdate_new()],
** [sqlite3_preupdate_count()], and [sqlite3_preupdate_depth()] interfaces
** provide additional information about a preupdate event. These routines
** may only be called from within a preupdate callback.  Invoking any of