Fossil

/******************************************************************************
** This file is an amalgamation of many separate C source files from SQLite
** version 3.6.6.1.  By combining all the individual C code files into this 
** single large file, the entire code can be compiled as a one translation
** unit.  This allows many compilers to do optimizations that would not be
** possible if the files were compiled separately.  Performance improvements
** of 5% are more are commonly seen when SQLite is compiled as a single
** translation unit.
**
** This file is all you need to compile SQLite.  To use SQLite in other
** programs, you need this file and the "sqlite3.h" header file that defines
** the programming interface to the SQLite library.  (If you do not have 
** the "sqlite3.h" header file at hand, you will find a copy in the first
** 6728 lines past this header comment.)  Additional code files may be
** needed if you want a wrapper to interface SQLite with your choice of
** programming language.  The code for the "sqlite3" command-line shell
** is also in a separate file.  This file contains only code for the core
** SQLite library.
**
** This amalgamation was generated on 2008-11-22 14:31:32 UTC.
*/
#define SQLITE_CORE 1
#define SQLITE_AMALGAMATION 1
#ifndef SQLITE_PRIVATE
# define SQLITE_PRIVATE static
#endif
#ifndef SQLITE_API

**          evaluate to a string literal that is the SQLite version
**          with which the header file is associated.
**
** {H10014} The SQLITE_VERSION_NUMBER #define shall resolve to an integer
**          with the value (X*1000000 + Y*1000 + Z) where X, Y, and Z
**          are the major version, minor version, and release number.
*/
#define SQLITE_VERSION         "3.6.6.1"
#define SQLITE_VERSION_NUMBER  3006006

/*
** CAPI3REF: Run-Time Library Version Numbers {H10020} <S60100>
** KEYWORDS: sqlite3_version
**
** These features provide the same information as the [SQLITE_VERSION]

** The pager is used to access a database disk file.  It implements
** atomic commit and rollback through the use of a journal file that
** is separate from the database file.  The pager also implements file
** locking to prevent two processes from writing the same database
** file simultaneously, or one process from reading the database while
** another is writing.
**
** @(#) $Id: pager.c,v 1.506 2008/11/19 18:30:29 drh Exp $
*/
#ifndef SQLITE_OMIT_DISKIO

/*
** Macros for troubleshooting.  Normally turned off
*/
#if 0

  while( i>0 ){
    cksum += aData[i];
    i -= 200;
  }
  return cksum;
}

/* Forward declaration */
static void makeClean(PgHdr*);

/*
** Read a single page from the journal file opened on file descriptor
** jfd.  Playback this one page.
**
** The isMainJrnl flag is true if this is the main rollback journal and
** false for the statement journal.  The main rollback journal uses
** checksums - the statement journal does not.

    */
    void *pData;
    pData = pPg->pData;
    memcpy(pData, aData, pPager->pageSize);
    if( pPager->xReiniter ){
      pPager->xReiniter(pPg);
    }
    if( isMainJrnl ) makeClean(pPg);


#ifdef SQLITE_CHECK_PAGES
    pPg->pageHash = pager_pagehash(pPg);
#endif
    /* If this was page 1, then restore the value of Pager.dbFileVers.
    ** Do this before any decoding. */
    if( pgno==1 ){
      memcpy(&pPager->dbFileVers, &((u8*)pData)[24],sizeof(pPager->dbFileVers));

      pPager->origDbSize = pPager->dbSize;
      rc = writeJournalHdr(pPager);
    }
  }
  assert( !pPager->journalOpen || pPager->journalOff>0 || rc!=SQLITE_OK );
  return rc;
}

/*
** Make a page dirty.  Set its dirty flag and add it to the dirty
** page list.
*/
static void makeDirty(PgHdr *pPg){
  sqlite3PcacheMakeDirty(pPg);
}

/*
** Make a page clean.  Clear its dirty bit and remove it from the
** dirty page list.
*/
static void makeClean(PgHdr *pPg){
  sqlite3PcacheMakeClean(pPg);
}


/*
** Mark a data page as writeable.  The page is written into the journal 
** if it is not there already.  This routine must be called before making
** changes to a page.
**
** The first time this routine is called, the pager creates a new

  if( rc ){
    return rc;
  }

  /* Mark the page as dirty.  If the page has already been written
  ** to the journal then we can return right away.
  */
  makeDirty(pPg);
  if( pageInJournal(pPg) && (pageInStatement(pPg) || pPager->stmtInUse==0) ){
    pPager->dirtyCache = 1;
    pPager->dbModified = 1;
  }else{

    /* If we get this far, it means that the page needs to be
    ** written to the transaction journal or the ckeckpoint journal

  **
  ** If the isCommit flag is set, there is no need to remember that
  ** the journal needs to be sync()ed before database page pPg->pgno 
  ** can be written to. The caller has already promised not to write to it.
  */
  if( (pPg->flags&PGHDR_NEED_SYNC) && !isCommit ){
    needSyncPgno = pPg->pgno;
    assert( pageInJournal(pPg) || pgno>pPager->origDbSize );
    assert( pPg->flags&PGHDR_DIRTY );
    assert( pPager->needSync );
  }

  /* If the cache contains a page with page-number pgno, remove it
  ** from its hash chain. Also, if the PgHdr.needSync was set for 
  ** page pgno before the 'move' operation, it needs to be retained 

  }

  sqlite3PcacheMove(pPg, pgno);
  if( pPgOld ){
    sqlite3PcacheDrop(pPgOld);
  }

  makeDirty(pPg);
  pPager->dirtyCache = 1;
  pPager->dbModified = 1;

  if( needSyncPgno ){
    /* If needSyncPgno is non-zero, then the journal file needs to be 
    ** sync()ed before any data is written to database file page needSyncPgno.
    ** Currently, no such page exists in the page-cache and the 

        sqlite3BitvecClear(pPager->pInJournal, needSyncPgno);
      }
      return rc;
    }
    pPager->needSync = 1;
    assert( pPager->noSync==0 && !MEMDB );
    pPgHdr->flags |= PGHDR_NEED_SYNC;
    makeDirty(pPgHdr);
    sqlite3PagerUnref(pPgHdr);
  }

  return SQLITE_OK;
}
#endif

** a legal notice, here is a blessing:
**
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
** $Id: btree.c,v 1.539.2.1 2008/11/22 14:07:49 drh Exp $
**
** This file implements a external (disk-based) database using BTrees.
** See the header comment on "btreeInt.h" for additional information.
** Including a description of file format and an overview of operation.
*/

/*

  assert( cursorHoldsMutex(pCur) );
  memcpy(pTempCur, pCur, sizeof(BtCursor));
  pTempCur->pNext = 0;
  pTempCur->pPrev = 0;
  for(i=0; i<=pTempCur->iPage; i++){
    sqlite3PagerRef(pTempCur->apPage[i]->pDbPage);
  }

}

/*
** Delete a temporary cursor such as was made by the CreateTemporaryCursor()
** function above.
*/
SQLITE_PRIVATE void sqlite3BtreeReleaseTempCursor(BtCursor *pCur){
  int i;
  assert( cursorHoldsMutex(pCur) );
  for(i=0; i<=pCur->iPage; i++){
    sqlite3PagerUnref(pCur->apPage[i]->pDbPage);
  }

}

/*
** Make sure the BtCursor* given in the argument has a valid
** BtCursor.info structure.  If it is not already valid, call
** sqlite3BtreeParseCell() to fill it in.
**

          rc = sqlite3BtreeNext(&leafCur, &notUsed);
        }
        pLeafPage = leafCur.apPage[leafCur.iPage];
        assert( pLeafPage->pgno==leafPgno );
        assert( leafCur.aiIdx[leafCur.iPage]==0 );
      }




      if( rc==SQLITE_OK ){
        dropCell(pLeafPage, 0, szNext);
        VVA_ONLY( leafCur.pagesShuffled = 0 );
        rc = balance(&leafCur, 0);
        assert( leafCursorInvalid || !leafCur.pagesShuffled
                                   || !pCur->pagesShuffled );
      }