/* machine.h Copyright (C) 1990-2002 Codemist Ltd */ /* * Set characteristics of machine given type. This ought to be the only * file that inspects macros predefined by your compiler, and on the basis * of those it sets a further set of macros that identify features * that characterise your computer. If you move CSL to a new computer * you should expect to have to add a few lines to this file. * Ideally all macros used with #ifdef should be mentioned in this file, * as documentation about what is available. At any one time that will * not be so as (for instance) short-term debugging control things will * come and go... * I will try to put comments about each symbol the first time it is * mentioned here. */ /* * This code may be used and modified, and redistributed in binary * or source form, subject to the "CCL Public License", which should * accompany it. This license is a variant on the BSD license, and thus * permits use of code derived from this in either open and commercial * projects: but it does require that updates to this code be made * available back to the originators of the package. * Before merging other code in with this or linking this code * with other packages or libraries please check that the license terms * of the other material are compatible with those of this. */ /* Signature: 1ccdfd3d 28-Feb-2003 */ #ifndef header_machine_h #define header_machine_h 1 #include /* almost everybody needs this */ #include #include /* needed for errorset & floating exceptions */ /* * The macro COMMON decides if the code is being built to implement * a Common Lisp or a Standard Lisp. If you want to build a Common * Lisp you should arrange that your makefiles establish -DCOMMON=1 as * a command-line option for the C compiler. NB with the COMMON option * you need a set of Lisp sources to build lots of higher level Common * Lisp functions, and these are not provided when CSL is shipped for * use with Reduce. */ /* * I want COMMON Lisp mode systems to use 18-page bits even on small * machines, so that image files can port between those and big systems. * As of April 1995 I will do the same for Standard Lisp, so that image * files are always cross-portable. If this puts too heavy a load on memory * on the remaining systems that do not support virtual memory then I could * go back down to using 16-bits, but that also limits the size of the largest * supported vector, biggest bignum etc. * In April 2002 I change this to 22, giving 4 Mbyte pages. Because of the * way that vector-headers are packed that is a limit on the size of objects * anyway sountil I do more radical re-work (inclusing perhaps a universal * move to 64-bit items) this as as far as it can go. */ #define SMALL_PAGE_BITS 22 /* * It is assumed that all addresses are 32-bits long (i.e. sizeof(void *)==4), * and that the sign of (long int)malloc(...) is always the same. For * some segmented machines, and possibly the transputer, malloc'd addresses * may look negative and I am supposed to be able to cope with this. * Also ANSI do not specify what happens when you go * int p = ((int)q) >> n; * with respect to sign-bit propagation. On many (most?) machines shifts * on signed values will be arithmetic (i.e. propagate the sign bit) * but I have tried to identify places where I rely on this and provide * alternative code for use when signed shifts are logical. * * The case of 64-bit addresses is under investigation for the DEC Alpha; * that case works provided all CSL memory can be put at addresses lower * than 0x7fffffff. The DEC/OSF "-taso" linker option supports that. * An extended and more genuine version for 64-bit arithmetic and addresses * is also part of an experiment, but that will not be complete for * some while [Sept 1997]. * Well, in fact I now seem to be able to run on genuine 64-bit architectures * (testing on NetBSD on a DEC Alpha)... [2001] */ #undef SIGNED_SHIFTS_ARE_LOGICAL /* I hope I never have to activate this */ #define MEGABYTE ((unsigned32)0x100000U) /* * I will define SOCKETS if a BSD-like socket library is available. Since * this is so on most important targets I will make it the default and * I will put an "#undef SOCKETS" where needbe, or go "-DNO_SOCKETS" when * I compile. */ #ifndef NO_SOCKETS #define SOCKETS 1 #endif /* * When WXWIN is defined I should be building using the wxWindows cross- * platform toolkit. In this case I will define CWIN too since the way I * interface to wxWindows is in many respects similar to that which I * originally used with my own CWIN windows code (which is built on the * MFC libraries). If I use either of those I will specify "WINDOW_SYSTEM" * too. */ #ifdef WXWIN # ifndef CWIN # define CWIN 1 # endif #endif /* * __WATCOMC__ is defined by Watcom C compilers. Note that some time in * 2002 the Watcom compilers turned open-source. I expect this compiler to * be associated with DOS/Windows and so if a version of Watcom for * some non x86 architecture or for a non-Microsoft operating system is * released some further adjustment will be needed here. Also note that for * the Windows build I need to link in the Microsoft Foundation Classes (MFC) * and those may not be available with OpenWatcom. So if I am using * OpenWatcom I will need to build either a command-line version or * the wxWindows variant. */ #ifdef __WATCOMC__ #ifndef __SW_3R /* * I really want this to have /3r or /5r calling conventions so that native * code and imulwat.asm can interface properly. */ #error Watcom C to be used with register (default) calling conventions, /5r #endif #ifndef WINDOWS_NT /* * IMPNAME names the version of CSL that I am compiling. It is made * available as a string as the initial value of a variable IMPNAME. Note * that undue reliance upon this can make Lisp checkpoint images non-portable. */ # define IMPNAME "DOS-386" /* * NATIVE_CODE_TAG is used as an identification number that indicates * what hard machine code conventions (this must include register conventions * as well as base machine architecture) apply in this version. When * any Lisp is compiled into real machine code the stored version of same * is marked with the value of NATIVE_CODE_TAG. If the image file that * results is loaded into a copy of CSL that uses the same tag then the * compiled code will be used. Otherwise it must not be. The objective here * is that a single image file *might* contain real machine code for * several architectures and I need to avoid mixups. Note that one * processor (eg Intel) may have different calling conventions (say * DOS/386, Windows and Linux) and one operating system and compiler may exist * on several different CPU architectures (eg Linux or generic UNix). * If I do not set a specific value of NATIVE_CODE_TAG it will default * to the value 0, which will be taken to mean "not available on this * version", which is at least a fairly safe situation. * I will also provide for a run-time computed extension to this tag * so that I can cope with machines that are very similar indeed but where * different optimisations are appropriate. */ # define NATIVE_CODE_TAG 1 /* DOS, Watcom, DOS4GW */ /* * Identify operating system being used */ # define MS_DOS 1 # undef SOCKETS /* * Identify the C compiler that I will use */ # define WATCOM 1 # define IMULTIPLY 1 # define IDIVIDE 1 /* * PAGE_BITS controls the size of page that CSL allocates memory in. For * 16-bit DOS this MUST be at most 16. Making it smaller would limit the * largest size of vectors and bignums in a bad way. For other systems it * can be (modestly) increased. If not set in this file a sensible default * applies. Keeping PAGE_BITS reasonably small makes some sense on machines * that do not have virtual memory, in that it reduces wastage due to * page granularity. */ # define PAGE_BITS SMALL_PAGE_BITS /* * On computers with lots of registers I choose to keep many important * variables where they can be addressed relative to one pointer, nil. * On register-poor machines this is silly, and I use regular external * variables instead. NILSEG_EXTERNS selects this option. The incantation * -DNILSEG_REGISTER=1 when compiling can override this... */ #ifndef NILSEG_REGISTER # define NILSEG_EXTERNS 1 /* externs.h */ #endif /* * See "tags.h" - these symbols control the size of memory that can * be accomodated, and under MSDOS there is a limit at 16 Mbytes anyway, * so allocating tables that could map more would be silly. * It is valid to set MAX_HEAPSIZE up to 2048*MEGABYTE (probably!), * but bit-packing for code-pointers (for bytecoded functions) means that * MAX_BPSSIZE MUST be no larger than (64*MEGABYTE). Keeping these * values realistically small will save (a modest amount of) space for * tables of pages. If you do not set values in this header file some * sensible default values will apply, so values are only set here for * "small" machines where saving a few kilobytes may matter. * The default values will be 1Gbyte of heap plus 64 Mbytes of compiled * bytecode (and another 64 Mbytes of hard code, in any case where that * option is supported). */ # define MAX_HEAPSIZE (2048*MEGABYTE) # define MAX_BPSSIZE (64*MEGABYTE) /* * On this (and some other machines) a steady stream of clock * ticks is available - I make these soft-interrupt CSL on a regular basis * and can then poll a window manager, refresh the screen, check for ^C * interrupts or whatever else needs doing. * The details will tend to be rather system specific. */ # define TICK_STREAM 1 /* * On some systems I will improve real speed or at the least arrange that * the times I record are not polluted by slow physical IO by buffering * screen updates. BUFFERED_STDOUT enables this. NEEDS_CARRIAGE_RETURN * must be set if buffers written by fwrite() need to have '\r' as well as * '\n' characters in them to mark line ends. */ # define BUFFERED_STDOUT 1 # define NEEDS_CARRIAGE_RETURN 1 /* * If POLL_FOR_ATTN is defined than a function poll_for_attn will * be called early in the handling of a clock tick, and the call * can set interrupt_pending is a ^C (or similar event) has been * requested by the user but not yet processed. This is done when * detection of such events involves active interaction with the * operating system. E.g. under MSDOS the ^C interrupt is not taken * until a system call is made, so poll_for_attn() just does an otherwise * fairly cheap and harmless system call. */ # define POLL_FOR_ATTN 1 /* * HELP_SYSTEM is defined if (inside the Lisp) I allow for keeping a database * of messages that get scanned by a function called "help". Actually these * days the default is to include help support and NO_HELP_SYSTEM must be * defined to disable it. */ # define HELP_SYSTEM 1 #endif /* end of DOS variant of Watcom */ #endif /* __WATCOMC__ */ /* * The section here supports LCC as a (free) C compiler in a DOS-box. * LCC is very portable but MAYBE a DOS-like system is a good enough * starting place for anybody who wants to try it out. */ #ifdef __LCC__ # define IMPNAME "LCC" # define NATIVE_CODE_TAG 10 /* LCC (not really thought through!) */ /* * Identify operating system being used and pretend to be DOS! Ie command * line interface only. */ # define MS_DOS 1 # undef SOCKETS /* * Identify the C compiler that I will use */ # define LCC_C 1 /* # define IMULTIPLY 1 */ /* # define IDIVIDE 1 */ # define PAGE_BITS SMALL_PAGE_BITS #ifndef NILSEG_REGISTER # define NILSEG_EXTERNS 1 /* externs.h */ #endif # define MAX_HEAPSIZE (2048*MEGABYTE) # define MAX_BPSSIZE (64*MEGABYTE) # define TICK_STREAM 1 #ifndef SOFTWARE_TICKS # define SOFTWARE_TICKS software_ticks #endif # define INITIAL_SOFTWARE_TICKS 3000 # define SOFTWARE_TICKS_PER_SECOND 40 # define BUFFERED_STDOUT 1 # define NEEDS_CARRIAGE_RETURN 1 # define POLL_FOR_ATTN 1 /* # define HELP_SYSTEM 1 */ #endif /* end of LCC */ #ifdef MS_DOS /* * OPSYS is used to set the operating system identification put in * the "lispsystem*" variable */ # ifndef OPSYS # define OPSYS "msdos" # endif #endif /* * The WINDOWS NT version is intended for all 32-bit windows worlds, * that is Windows NT, Windows 95 and (as a temporary expedient) Win32s * running on top of Windows 3.x. Eventually the support for win32s will * be abandoned. */ #ifdef WINDOWS_NT /* * For very many purposes I will build a Windows NT version of this code * using a (slightly separate) window management packaged called CWIN. * But to provide flexibility for people who do not want to use this (for * instance if they wish to build the code for embedded use and not give * it any direct access to the user) I will not force this option here, but * will require that in suitable cases the C compiler is invoked with the * symbol CWIN predefined. This can make sense since the build sequences * in such cases will need to compile and link in parts of the CWIN * package too. */ #ifdef CWIN /* * SIMULATED_PIPES directs pipe access through code I write for myself. */ # define SIMULATED_PIPES 1 #endif # define MS_DOS 1 # ifdef __WATCOMC__ # define NATIVE_CODE_TAG 2 /* Watcom, 32-bit Windows, register calling */ # else /* * MS_C is set if we are using Microsoft C, or some other C compiler that * like __cdecl qualifiers in a load of places. */ # define MS_C 1 # define NATIVE_CODE_TAG 3 /* MS VC++ 5.0, Windows 95 & NT */ # endif /* * The next just provides more info about the target operating system */ # define USES_WIN32 1 #ifndef NILSEG_REGISTER # define NILSEG_EXTERNS 1 /* externs.h */ #endif # define MAX_HEAPSIZE (2048*MEGABYTE) # define MAX_BPSSIZE (64*MEGABYTE) /* * IMULTIPLY and IDIVIDE get defined if you have assembly code versions * of the primitive arithmetic routines that need 64-bit intermediate * working. */ # define IMULTIPLY 1 # define IDIVIDE 1 # define TICK_STREAM 1 /* * I guard SOFTWARE_TICKS this way so that the user can force its value * with -DSOFTWARE_TICKS=nnnn in CFLAGS, either to change the frequency of * polling or to force software ticks on a version of the system that * usually uses operating-system provided ones. The value 3000 chosen here * as a default seems to lead to a tolerable frequency of polling on * reasonably fast machines. Slow systems might like a smaller value to * keep them more responsive to the user? */ #ifndef SOFTWARE_TICKS # define SOFTWARE_TICKS software_ticks #endif /* * If I define SOFTWARE_TICKS to be software_ticks and then ALSO * define INITIAL_SOFTWARE_TICKS I will use a dynamic scheme that * tries to adjust things to have about SOFTWARE_TICKS_PER_SECOND * ticks per second. */ # define INITIAL_SOFTWARE_TICKS 3000 # define SOFTWARE_TICKS_PER_SECOND 40 /* * COMMAND_LINE_VERSION builds an NT variant that does not use the Window * susbsystem. It will be use a simple command-line interface. */ #ifdef COMMAND_LINE_VERSION # define IMPNAME "DOS" # define OPSYS "dos" # define NO_HELP_SYSTEM 1 #else # define IMPNAME "Windows" # define OPSYS "win32" /* * The next flag indicate that a system can provide a windowed * environment with support for graphics output. This arranges that * calls that print to stdout are handled specially */ # define WINDOW_SYSTEM 1 /* * Note that for Windows I will use the Microsoft HELP mechanism rather * than anything built inside the Lisp. However I build in the Help system * here in order to make debugging same easier. */ # define HELP_SYSTEM 1 #endif /* COMMAND_LINE_VERSION */ /* * PIPES is set if the functions my_popen(command, dirn) and my_pclose() are * available. I do not make this synomymous with UNIX since a strict ANSI * C library will not provide these functions. Also I make the entries used * go via a system-specific hook since not all operating systems have calls * that are exactly like the Unix popen and pclose. */ # define PIPES 1 /* * In the case of Win32 I will have pipes if I am under Win32, bit * not Win32S - so I will have to have a run-time test to see if pipes are * really available. Oh misery! */ # define PIPES_SOMETIMES 1 #ifndef __WATCOMC__ /* * BUILDING_DLL puts a __decltype(dllexport) qualifier in a load of * extern declarations. This may be useful if I want CSL/CCL to be a DLL * for some reason. But I have not checked this with Watcom C, only * with Microsoft, hence I do not enable it too generally. */ /* # define BUILDING_DLL 1 */ #endif #endif /* * I do not want to use Think C other than on a Mac. And in fact it is a very * long time since I build this version so it may well be broken by now. */ #ifdef THINK_C /* Development on a Mac with System 7 and Think C 5.0 */ /* Yes this is now old enough it should be pensioned off */ # define IMPNAME "Macintosh" # define OPSYS "finder" /* * Bits of the operating-system interface like to know they are on a Mac. */ # define MACINTOSH 1 /* * See comment earlier on about default condition wrt socket support. */ /* * SIXTEEN_BIT is set if I need to use "long int" to get a 32-bit value. * This will hardly ever be true now days! I do not guarantee that it * still works! Please avoid if at all possible. */ # define SIXTEEN_BIT 1 /* Check this out - harmless anyway */ # define PAGE_BITS SMALL_PAGE_BITS /* * OUT_OF_LINE being defined makes the code SLIGHTLY smaller and SLIGHTLY * slower. It only has an effect on the file "bytes1.c" where you can see * what it does. */ # define OUT_OF_LINE 1 /* bytes1.c close to size limit for Mac? */ # define ADDRESSES_HAVE_TOP_BIT_CLEAR 1 # define TICK_STREAM 1 # define MAX_HEAPSIZE (2048*MEGABYTE) # define MAX_BPSSIZE (64*MEGABYTE) # define WINDOW_SYSTEM 1 # undef SOCKETS # define HELP_SYSTEM 1 /* * If HOLD_BACK_MEMORY is defined it indicates a number of pages * to release to the operating system so that I do not utterly run out ever... * Most necessary if low level operating system routines in effect do * malloc() in a way I can not control. * * HOLD_BACK_MEMORY is asserted here and MUST BE for all machines * where sizeof(size_t) == 2, since in that case it will not be possible * to allocate memory in one big hunk. */ # define HOLD_BACK_MEMORY 6 /* * For the Macintosh I will use NewPtr rather than malloc - the main reason * I do this is that once malloc has grabbed space (under Think C) free * never hands it back to the operating system. */ #include #undef nil /* Think C headers go "#define nil 0" which hurts me */ #define malloc(n) NewPtr(n) #define free(p) DisposPtr((Ptr)(p)) #endif /* * powerpc is another synonym for "Macintosh" in this context, and expects * you to be using the Symantecs C compiler. */ #ifdef powerc /* Development on a PowerPC with System 7 and Symantecs */ # define IMPNAME "PowerPC" # define OPSYS "finder" /* * Bits of the operating-system interface like to know they are on a Mac. */ # define MACINTOSH 1 /* * OUT_OF_LINE being defined makes the code SLIGHTLY smaller and SLIGHTLY * slower. It only has an effect on the file "bytes1.c" where you can see * what it does. */ # define OUT_OF_LINE 1 /* bytes1.c close to size limit for Mac? */ # define ADDRESSES_HAVE_TOP_BIT_CLEAR 1 # define TICK_STREAM 1 # define MAX_HEAPSIZE (2048*MEGABYTE) # define MAX_BPSSIZE (64*MEGABYTE) # define WINDOW_SYSTEM 1 # define TICK_STREAM 1 # define SOFTWARE_TICKS software_ticks # define INITIAL_SOFTWARE_TICKS 3000 # define SOFTWARE_TICKS_PER_SECOND 40 # define POLL_FOR_ATTN 1 # define NO_HELP_SYSTEM 1 # undef SOCKETS # define HELP_SYSTEM 1 /* * If HOLD_BACK_MEMORY is defined it indicates a number of pages * to release to the operating system so that I do not utterly run out ever... * Most necessary if low level operating system routines in effect do * malloc() in a way I can not control. * * HOLD_BACK_MEMORY is asserted here and MUST BE for all machines * where sizeof(size_t) == 2, since in that case it will not be possible * to allocate memory in one big hunk. */ # define HOLD_BACK_MEMORY 6 #undef nil /* Think C headers go "#define nil 0" which hurts me */ #endif #ifdef arm /* Old RISCIX compiler... */ # define __arm 1 #endif #ifdef __arm # define IMPNAME "Archimedes" # undef SOCKETS #ifdef __riscos /* Note NOT automatically defined by release compiler: Use -D__riscos please */ /* * A profile option is available to help record low-level execution * profiles of CSL's performance. Intended for use by those involved in * fine-tuning system performance. */ # define SHOW_COUNTS_AVAILABLE 1 /* gc1.c */ /* * RISCOS is the operating system on an Acorn Archimedes */ # define RISCOS 1 # define OPSYS "riscos" # define HOLD_BACK_MEMORY 1 # define PAGE_BITS SMALL_PAGE_BITS # define OUT_OF_LINE 1 /* memory generally tight? */ # define ADDRESSES_HAVE_TOP_BIT_CLEAR 1 # define MAX_HEAPSIZE (2048*MEGABYTE) # define MAX_BPSSIZE (64*MEGABYTE) # define TICK_STREAM 1 /* * USE_AUTOINDEX causes the code that pushes multiple values onto * the Lisp stack to use the addressing idiom (*++sp) and *(sp--) * repeatedly. Otherwise the data movement and stack adjustment are * written out as separate steps so that all adjustment is done in * a single operation. With sufficiently clever compilers this ought not * to matter, but at present there are plenty of compilers around that * are not that smart! */ # define USE_AUTOINDEX 1 #ifndef SOFTWARE_TICKS # define SOFTWARE_TICKS 3000 /* Maybe this is more robust?? */ #endif # define WINDOW_SYSTEM 1 # define HELP_SYSTEM 1 /* * In the case of RiscOS I will support pipes ONLY to the extent that * the gnuplot interface requires them. Indeed the apparently generic * (popen ...) function will send messages via the window manager with * destination gnuplot (tested with gnuplot 3.4) only. Beware! */ # define SIMULATED_PIPES 1 # define PIPES 1 #else /* __riscos : the converse is taken to be RISCIX (Unix) */ /* * Where Unix is available I use times() to read the clock, and report * user CPU time. The value given to UNIX_TIMES indicates the clock * tick resolution used. If this is not set I use clock() instead, which * tends to count system time as well as user time and hence make the * reports suggest lower performance... Do you call this cheating? */ # define UNIX_TIMES 100 # define UNIX 1 # define PIPES 1 #endif /* __riscos */ #endif /* __arm */ /* * For the Alpha I have tried builds in DECs OSF/1 (where the code works * OK using the "-taso" linker option) and under NetBSD in true 64-bit * mode. This setup would not work for Windows NT (now defunct for alphas?), * and might not behave well for Linux-alpha. Indeed the Alpha and in general * 64-bit support is still in the process of stabilising! */ #ifdef __alpha # define IMPNAME "DEC Alpha" # define UNIX 1 # define BSD_LIB 1 # define PIPES 1 #ifdef __NetBSD__ # define UNIX_TIMES 100 #else # define UNIX_TIMES 60 #endif /* * SIXTY_FOUR_BIT can be set if I have a representation of 64-bit * integers (efficiently) available. This gets mapped onto the * typedef names int64 and unsigned64, and may be used to speed up * bignum arithmetic. SIXTY_FOUR_BIT defined directly indicates that * the data type "long int" is a 64 bit one. If "LONG_LONG_64" is set * (instead) then the long integer type is taken to be "long long int", * an option relevant for (eg) super-sparc. The flag SIXTY_FOUR_BIT on its * own does not change the representation of data at all: it just changes * the way in which bignumber code is implemented in rather minor ways. * However it is needed if the next option (ADDRESS_64) is to be used. */ # define SIXTY_FOUR_BIT 1 /* * ADDRESS_64 is set to activate the mode where all items in Lisp * are stored as 64 rather than just 32 bits. Doing so doubles the * size of data structures but allows the use of truly huge amounts of * memory. If may be NEEDED for some future computer architectures as * backwards-compatibility modes whereby 64-bit machines can simulate * 32 bit ones are gradually withdrawn. At present the computer that * I am working on this using runs NetBSD hence the #ifdef. Note that * heap images from ADDRESS_64 systems are not compatible with ones from * the 32-bit universe. */ #ifdef __NetBSD__ # define ADDRESS_64 1 #endif # ifndef _CC_NORCROFT /* * MULDIV64 is set if "long" is a 64-bit type to be used in Imultiply etc * here (temporarily) I only use it if I am using the DEC C compiler. */ # define MULDIV64 1 # endif #endif /* * Something of a place-holder for the Intel 64-bit chip. Here I expect * it to be run on some form of Unix as a true 64-bit system. */ #ifdef __ia64 # define IMPNAME "ia64" # define UNIX 1 # define BSD_LIB 1 # define PIPES 1 # define UNIX_TIMES 60 # define SIXTY_FOUR_BIT 1 # define ADDRESS_64 1 # define MULDIV64 1 #endif #ifndef __sgi #ifdef __mips # ifndef __mips__ # define __mips__ # endif #endif #ifdef __mips__ # define IMPNAME "MIPS" /* * To my amazement on most machines an integer GCD function based on * subtraction and shifting outperformed one based on division. Where * really fast hardware division is available define this symbol to * use the more obvious code. */ # define FAST_DIVISION 1 /* arith09.c (gcd) */ # define UNIX 1 # define PIPES 1 /* * Ultrix seems to object to fopen(xx, "rb"), and demand fopen(xx, "r") * This is harmless of all UNIX systems, as all I/O is binary in Unix, but * most other versions will at least accept "rb" and "wb", and if the C * library is ANSI compatible they MUST do so. */ # define NO_BINARY_FOPEN 1 /* At present I can deal with two UNIX library types; BSD and NCC * With BSD_LIB set then use will be made of isatty(2) and some other * functions. With NCC_LIB (which is rather strict) private knowledge of the * systems is used. But since NCC is the Codemist C compiler and library * maybe we (Codemist) are entitled to exploit a bit of inside information * from time to time? */ #ifdef SGICC # undef __sgi #endif # ifdef __titan # define NCC_LIB 1 # else # ifdef __sgi # define NCC_LIB 1 # else # define BSD_LIB 1 # define WANT_POSIX 1 # define UNIX_TIMES CLK_TCK # endif # endif #endif #endif #ifdef __sgi # if __mips == 3 # define IMPNAME "SGI MIPS III" # elif __mips == 1 # define IMPNAME "SGI MIPS I" # else # define IMPNAME "SGI" # endif # define WANT_POSIX 1 # define PIPES 1 # define UNIX_TIMES CLK_TCK # define UNIX 1 # define BSD_LIB 1 #endif #ifdef vax # ifdef vms /* this allows me to compile under VAX/VMS directly */ # define __vmsvax__ # endif #endif #ifdef __vax__ # define IMPNAME "VAX" # define NO_BINARY_FOPEN 1 # define UNIX_TIMES 60 # define UNIX 1 # define BSD_LIB 1 # define PIPES 1 # define USE_AUTOINDEX 1 #endif #ifdef __vmsvax__ # define IMPNAME "VAX/VMS" # define OPSYS "vms" # define VAXFLOAT 1 # define UNIX_TIMES 60 /* OK under VMS? */ # define HELP_SYSTEM 1 # define USE_AUTOINDEX 1 # undef SOCKETS #endif #ifdef NeXT /* * This was once tested on a Pentium Pro running NeXT, and may deserve * adjustment for other variant targets. */ # define IMPNAME "NeXT" # define UNIX 1 /* almost! */ # define OPSYS "unix" /* close enough! */ # define UNIX_TIMES 60 # define BSD_LIB 1 # define USE_DIRECT_H 1 /* use not */ # define UTIME_TIME_T 1 /* Arg type for utime() function */ # define NO_GETCWD 1 /* Functionality unavailable? */ #endif #ifdef _rs6000 # define IMPNAME "rs/6000" # define UNIX 1 /* * Magic to do with the need for symbols predefined before etc * get scanned on this machine. */ # define WANT_POSIX 1 # define PIPES 1 # define UNIX_TIMES 100 # define BSD_LIB 1 #endif #ifdef SR2201 /* * Experimental use of the Hitachi mpp based on HP-precision derived CPUs. * No longer under serious consideration. */ # define IMPNAME "SR2201" # define UNIX 1 # define PIPES 1 # define UNIX_TIMES 100 # define BSD_LIB 1 /* * USE_PVM guards extra capability for the Lisp so that it can use PVM * to provide a parallel Lisp environment, at least in a crude way. Well * these days I think that MPI is a better bet anyway, so that is another * respect in which this code is a historical relic! */ # define USE_PVM 1 #endif #ifdef __clipper # define IMPNAME "Clipper" # define UNIX 1 # define NCC_LIB 1 #endif #ifdef __bsdos__ # define IMPNAME "BSD/OS 2.1" # define UNIX 1 # define UNIX_TIMES 60 # define PIPES 1 # define BSD_LIB 1 # define IMULTIPLY 1 # define IDIVIDE 1 #endif #ifdef __CYGWIN32__ # define IMPNAME "CygWin32" # define OPSYS "cygwin32" # define NATIVE_CODE_TAG 9 # define UNIX 1 /* Well not really, but close enough! */ # define PIPES 1 # define BSD_LIB 1 #endif #ifdef __linux__ /* * Linux can be run on many sorts of host hardware. The entry here is for * Linux on x86 systems. Other cases (Alpha, Sparc etc?) could be detected * earlier in this file and if they define IMPNAME this set of defaults * will not get activated. I think this all shows that there is a problem * around here. The C compiler used provides (default) predefined symbols, * and my configuration may need to depend in part on hardware architecture, * operating system AND the specific C compiler. But in some cases there are * strong associations between combinations of these. */ #ifndef IMPNAME /* more specific variants can go first */ # define IMPNAME "Linux" /* * WARNING - I ought to filter the next line on Intel archirecture, * since otherwise it will cause trouble on other variants on Linux! */ # define NATIVE_CODE_TAG 4 /* Linux, Intel, Pentium conventions */ # define UNIX 1 # define PIPES 1 # define BSD_LIB 1 #endif #endif #ifdef __hp9000s300 # define IMPNAME "HP/9000.300" # define WANT_POSIX 1 /* * HP Unix has a few features that I need to support specially in sysunix.c */ # define HP_UNIX 1 /* * More (HP-specific) magic that arranges that the standard headers * provide XOPEN support. */ # ifndef _INCLUDE_XOPEN_SOURCE # define _INCLUDE_XOPEN_SOURCE 1 # endif # define PIPES 1 # define UNIX_TIMES CLK_TCK # define UNIX 1 # define BSD_LIB 1 #endif #ifdef __hp9000s800 # define IMPNAME "HP/9000.800" # define WANT_POSIX 1 # define HP_UNIX 1 # define _INCLUDE_XOPEN_SOURCE 1 # define PIPES 1 # define UNIX_TIMES CLK_TCK # define UNIX 1 # define BSD_LIB 1 #endif #ifdef __APOLLO__ # define IMPNAME "Apollo" # define UNIX_TIMES 60 # define UNIX 1 # define BSD_LIB 1 # define PIPES 1 /* * I define OUT_OF_LINE here to reduce stress on a C compiler that has in the * past given some trouble. */ # define OUT_OF_LINE 1 #endif #ifdef __ibm370 /* * Note that I have not tested CSL on this target yet... and image files etc * will not be compatible from ASCII to EBCDIC machines. Furthermore you * may have trouble finding an instance of the IBM mainframe architecture now! */ # define IMPNAME "S/370" # define OPSYS "mvs" # define HELP_SYSTEM 1 # undef SOCKETS #endif #ifdef __m88k__ /* * I had one of these (a Data General Aviion) once... */ # define IMPNAME "mc88000" # define UNIX_TIMES 60 # define UNIX 1 # define BSD_LIB 1 # define PIPES 1 #endif /* GNU C defines __GNUC__ */ /* SPARCCompiler defines __SUNPRO_C */ #if defined(__sparc) || defined(__sparc__) # if defined(__SUNPRO_C) # define IMPNAME "SPARC-SUNPRO" # define NATIVE_CODE_TAG 5 # elif defined(__GNUC__) # define IMPNAME "SPARC-GCC" /* * It may be that SPARC and the 2 C compilers mentioned here both use * identical code, so I could give them the same tag. But equally I might * need to refine things to cope with the difference between the baseline * sparc architecture and the ultra-sparc (etc) variants. */ # define NATIVE_CODE_TAG 6 # else # define IMPNAME "SPARC" # endif # define UNIX 1 # define UNIX_TIMES CLK_TCK # define BSD_LIB 1 # define PIPES 1 #else /* * This is the older version of SPARC options. */ #if defined __sparc__ # define IMPNAME "SPARC" # ifdef sun /* For Sparcstation with sub-standard C library */ /* You may need to adjust this for your sun */ typedef char *VoidStar; #endif # include # define UNIX_TIMES HZ # define UNIX 1 # define BSD_LIB 1 # define PIPES 1 #endif #ifdef __sparc # define IMPNAME "SPARC" # define UNIX 1 # define NO_BINARY_FOPEN 1 /* probably not needed */ # ifndef BSD_LIB # define NCC_LIB 1 # endif # define PIPES 1 #endif #endif #ifdef __kcm /* The ICL "Knowledge Crunching Machine */ # define IMPNAME "KCM" # define OPSYS "kcm" # define HELP_SYSTEM 1 # undef SOCKETS #endif #ifdef __BORLANDC__ /* * An experimental build for 32-bit console mode using Borland C 4.0. Not * really needed any more but kept here as a historical relic. */ # define IMPNAME "Borland 4.0" # define NATIVE_CODE_TAG 7 # define MS_DOS 1 # define OPSYS "msdos" # define PAGE_BITS SMALL_PAGE_BITS #ifndef NILSEG_REGISTER # define NILSEG_EXTERNS 1 /* externs.h */ #endif # define MAX_HEAPSIZE (2048*MEGABYTE) # define MAX_BPSSIZE (64*MEGABYTE) # define TICK_STREAM 1 # define SOFTWARE_TICKS software_ticks # define INITIAL_SOFTWARE_TICKS 3000 # define SOFTWARE_TICKS_PER_SECOND 40 # define POLL_FOR_ATTN 1 # define NO_HELP_SYSTEM 1 # undef SOCKETS /* It may be that Borland have these */ #endif #ifdef OLD_OPTIONS_NO_LONGER_SUPPORTED # undef SOCKETS /* * I once supported MSDOS using Zortech C release 3.0 * This could be used in two modes - one for 80286 systems, and one for * 386 and 486. When using this option ensure that you have collected * all available patches and updates from Zortech... DOS16RM is set by * Zortech C when in 16-bit extended mode. * Note that the compiler referred to here as "Zortech" is now shipped * by Symantec, and their current offering is not the one I use when * building and testing my code. I have no reason to suppose that the * Symantec C will give problems here, but it is very probable that some * small changes to the makefile and code will be called for if you use it. */ #ifdef DOS16RM /* Intel 80286 family (16 bit mode) */ /* For use with Zortech Mode Z extender */ # define IMPNAME "MSDOS/286" # define MS_DOS 1 # define ZORTECH_C 1 # define BUFFERED_STDOUT 1 # define NEEDS_CARRIAGE_RETURN 1 # define SIXTEEN_BIT 1 # define PAGE_BITS 16 #ifndef NILSEG_REGISTER # define NILSEG_EXTERNS 1 /* externs.h */ #endif # define MAX_HEAPSIZE (2048*MEGABYTE) # define MAX_BPSSIZE (64*MEGABYTE) # define OUT_OF_LINE 1 # define TICK_STREAM 1 # define POLL_FOR_ATTN 1 #ifndef SOFTWARE_TICKS # define SOFTWARE_TICKS software_ticks #endif # define INITIAL_SOFTWARE_TICKS 3000 # define SOFTWARE_TICKS_PER_SECOND 40 # define HOLD_BACK_MEMORY 1 # define HELP_SYSTEM 1 #endif /* * DOS386 is predefined by Zortech in flat 32-bit mode. I use the * Flashtek X-32VM DOS extender so that virtual memory is available * to me, but you could rebuild without that and the code would still * work. */ #ifdef DOS386 /* Zortech 32-bit mode 386 */ # define IMPNAME "MSDOS/386" # define MS_DOS 1 # define ZORTECH_C 1 # define IMULTIPLY 1 # define IDIVIDE 1 # define PAGE_BITS SMALL_PAGE_BITS /* * Selecting the NILSEG_EXTERNS option gives a (roughly 4%) speed-up * for the 386. Really it is a toss-up whether to use it or not. */ #ifndef NILSEG_REGISTER # define NILSEG_EXTERNS 1 /* externs.h */ #endif # define MAX_HEAPSIZE (2048*MEGABYTE) # define MAX_BPSSIZE (64*MEGABYTE) # define TICK_STREAM 1 # define BUFFERED_STDOUT 1 # define NEEDS_CARRIAGE_RETURN 1 /* * define OLD_ZORTECH_DOS_EXTENDER if you need to use software ticks. */ #ifdef OLD_ZORTECH_DOS_EXTENDER /* * If fully asynchronous clock interrupts are too hard or too dangerous * (and in Zortech 'X' mode they are in January 1992 - pending a bug-fix * release of the DOS extender) I can provide second best with sem- * regular polling done totally from within the CSL software. There will * be both performance loss and a loss of responsiveness - the value that * the macro SOFTWARE_TICKS is given will allow some control over * this trade-off, with small values giving better response but lower * overall speed. The latest Zortech extender I have tried is 3.0r4, which * needs SOFTWARE_TICKS, but if I use the Flashtek extender I seem to be * OK. See comments above whereby in recent versions of CSL I can make * the count here dynamic to tune the rate of clicks a to deliver a * measure of the number of ticks per second rather than the ration of * elemental operatiomns within CSL to these clicks. */ #ifndef SOFTWARE_TICKS # define SOFTWARE_TICKS 3000 #endif #endif # define POLL_FOR_ATTN 1 # define HELP_SYSTEM 1 #endif #ifdef GCC386 /* GNU C for DOS */ # define IMPNAME "GCC/386" # define NATIVE_CODE_TAG 8 # define MS_DOS 1 # define PAGE_BITS SMALL_PAGE_BITS /* * Selecting the NILSEG_EXTERNS option gives a (roughly 4%) speed-up * for the 386. Really it is a toss-up whether to use it or not. */ #ifndef NILSEG_REGISTER # define NILSEG_EXTERNS 1 /* externs.h */ #endif # define MAX_HEAPSIZE (2048*MEGABYTE) # define MAX_BPSSIZE (64*MEGABYTE) # define TICK_STREAM 1 # define BUFFERED_STDOUT 1 # define NEEDS_CARRIAGE_RETURN 1 #ifndef SOFTWARE_TICKS # define SOFTWARE_TICKS software_ticks #endif # define INITIAL_SOFTWARE_TICKS 3000 # define SOFTWARE_TICKS_PER_SECOND 40 # define POLL_FOR_ATTN 1 # define HELP_SYSTEM 1 # define IMULTIPLY 1 # define IDIVIDE 1 # define HUGE_VAL 1.7976931348623167e+308 /* deficient headers */ #endif #ifdef ATARI /* Lattice C for all STs */ # define IMPNAME "ATARI" # define OPSYS "atari" /* * Identify the C compiler I will use; well I actually use Lattice and Norcroft */ # define LATTICE_C 1 # define SIXTEEN_BIT 1 /* Certainly not needed with NCC. Lattice? */ # define HOLD_BACK_MEMORY 1 # define PAGE_BITS SMALL_PAGE_BITS #ifndef NILSEG_REGISTER # define NILSEG_EXTERNS 1 /* externs.h */ #endif # define MAX_HEAPSIZE (2048*MEGABYTE) # define MAX_BPSSIZE (64*MEGABYTE) # define TICK_STREAM 1 # define NO_COPYING_GC 1 # define POLL_FOR_ATTN 1 # define HELP_SYSTEM 1 /* * If I know that addresses returned by malloc() will always have their top * bit either set or clear I assert ADDRESSES_HAVE_TOP_BIT_SET or _CLEAR. * Otherwise CSL will discover for itself at run time. I can set _UNKNOWN * to stress that dynamic discovery is needed. */ # define ADDRESSES_HAVE_TOP_BIT_CLEAR 1 #define sqrt(x) atari_sqrt(x) #define exp(x) atari_exp(x) #define sin(x) atari_sin(x) #define cos(x) atari_cos(x) #define tan(x) atari_tan(x) #define atan(x) atari_atan(x) #define asin(x) atari_asin(x) #define acos(x) atari_acos(x) #define sinh(x) atari_sinh(x) #define cosh(x) atari_cosh(x) #define tanh(x) atari_tanh(x) #define log(x) atari_log(x) #define pow(x,y) atari_pow(x,y) #define frexp(x,y) atari_frexp(x,y) #define ldexp(x,y) atari_ldexp(x,y) extern double atari_sqrt(double); extern double atari_exp(double); extern double atari_sin(double); extern double atari_cos(double); extern double atari_tan(double); extern double atari_atan(double); extern double atari_asin(double); extern double atari_acos(double); extern double atari_sinh(double); extern double atari_cosh(double); extern double atari_tanh(double); extern double atari_log(double); extern double atari_pow(double,double); extern double atari_frexp(double, int*); extern double atari_ldexp(double,int); #endif #else /* * But having withdrawn support I will arrange that if anybody tries to use * the old code they get a diagnostic. There remains a reasonable chance that * by altering this file and making a modest number of system-specific * patches elsewhere (notably in sysxxx.c and its associates) the system * could be revived. And if there is substantial demand I may try that * myself, provided I can gain access to a suitable computer. */ #ifdef DOS16RM /* Intel 80286 family (16 bit mode) */ #error This compiler/computer is not lonnger supported by CSL #endif #ifdef DOS386 /* Zortech 32-bit mode 386 */ #error This compiler/computer is not lonnger supported by CSL #endif #ifdef GCC386 /* GNU C for DOS */ #error This compiler/computer is not lonnger supported by CSL #endif #ifdef ATARI /* Lattice C for all STs */ #error This compiler/computer is not lonnger supported by CSL #endif #endif /* OLD_OPTIONS_NO_LONGER_SUPPORTED */ /* * Now to make things easier for experimentation I will set some defaults * for the name of the implementation and the style of operating system * in use. */ #ifndef IMPNAME # define IMPNAME "Generic" #endif #ifndef OPSYS # define UNIX 1 #endif #ifdef UNIX # ifndef OPSYS # define OPSYS "unix" # endif # ifndef HELP_SYSTEM # define HELP_SYSTEM 1 # endif # ifndef ADDRESS_SIGN_UNKNOWN # ifndef ADDRESSES_HAVE_TOP_BIT_SET # define ADDRESSES_HAVE_TOP_BIT_CLEAR 1 # endif # endif #endif /*----------------------------------------------------------------------*/ #ifdef WANT_POSIX # ifndef _POSIX_SOURCE # define _POSIX_SOURCE 1 # define _INCLUDE_POSIX_SOURCE 1 # endif #endif #ifndef WINDOW_SYSTEM #ifdef CWIN #define WINDOW_SYSTEM 1 #endif #ifdef WXWIN #define WINDOW_SYSTEM 1 #endif #endif #ifdef WINDOW_SYSTEM # ifndef BUFFERED_STDOUT # define BUFFERED_STDOUT 1 # endif #endif #ifndef NATIVE_CODE_TAG # define NATIVE_CODE_TAG 0 /* Native code not available */ #endif #ifndef _cplusplus /* * If I am compiling with a C++ compiler then setjmp is a BAD thing to * use, but there are "better" exception handling facilities. If you are * going to link the code here with any C++ class libraries (say that * look after graphical user interfaces) it might make sense to compile * everything in C++ mode just to be on the safe side. With some C++ * compilers the conflict between setjmp and try/catch seems to be * pretty extreme. In some cases it may even extend to the whole * application failing to link. */ #include #endif #include /* so I can declare base_time etc as clock_t */ #ifdef MS_C /* * If I use something other than __cdecl as the default calling convention * with Microsoft C I need to stick in a qualifier for some of my functions * where the standard calling model is needed. Eg signal handler fns. For * compilers other than the Microsoft one I do not need qualifiers at all. */ # define MS_CDECL __cdecl #else # define MS_CDECL #endif /* * When building for use with Windows (Win32 or Win32s) I will make most * entrypoints available if the whole package is linked as a DLL. At least * I do that if building with Microsoft C - with Watcom I need to do more * work first to understand how to make that option work. */ #ifdef BUILDING_DLL #define DLLexport __declspec(dllexport) #else #define DLLexport #endif /* * Several C compilers that I have come across follow an ANSI draft that * called the clock quantum CLK_TCK, while in the final standard it * is CLOCKS_PER_SEC. Attempt to patch things up. If even CLK_TCK is not * defined I would rather you gave me a value using -DCLOCKS_PER_SEC, or * maybe in a machine-specific #ifdef... but I still try at least SOMETHING. * * In similar style, some sets of supposedly standard header files fail to * define EXIT_SUCCESS, EXIT_FAILURE or SEEK_SET. I attempt to patch things * up here, but really it would be better to get the host C compiler mended. */ #ifndef CLK_TCK # define CLK_TCK 60 /* Utterly spurious value - I know no better */ #endif #ifndef CLOCKS_PER_SEC # define CLOCKS_PER_SEC (CLK_TCK) #endif #ifndef EXIT_SUCCESS # define EXIT_SUCCESS 0 #endif #ifndef EXIT_FAILURE # define EXIT_FAILURE 1 #endif # ifndef SEEK_SET # define SEEK_SET 0 # endif # ifndef SEEK_END # define SEEK_END 2 # endif #ifdef NO_HELP_SYSTEM /* Even if default for this architecture, remove HELP support */ # undef HELP_SYSTEM #endif #ifdef INITIAL_SOFTWARE_TICKS # ifndef SOFTWARE_TICKS_PER_SECOND # define SOFTWARE_TICKS_PER_SECOND 40 # endif #endif #ifdef SOFTWARE_TICKS_PER_SECOND # ifndef INITIAL_SOFTWARE_TICKS # define INITIAL_SOFTWARE_TICKS 3000 # endif #endif #ifdef CWIN # include "cwin.h" #endif #endif /* header_machine_h */ /* end machine.h */