Artifact 5a2f0fef1cc34fc7aa06a01d975130bbe5d52d41d4f248caeaeaf564d0aeeece:


Utah Symbolic Computation Group                     December 1981
Operating Note 60









       A PASCAL Based Standard LISP for the Apollo Domain
       A PASCAL Based Standard LISP for the Apollo Domain
       A PASCAL Based Standard LISP for the Apollo Domain


                               by

                 M. L. Griss and R. Ottenheimer

                 Department of Computer Science
                       University of Utah
                   Salt Lake City, Utah 84112

                      Preliminary  Version
                      Preliminary  Version
                      Preliminary  Version

                 Last Revision: 26 February 1982










                            ABSTRACT
                            ABSTRACT
                            ABSTRACT


This  report describes an interim implementation of Standard LISP
for the Apollo DOMAIN. This LISP is based upon the Standard  LISP
report,  and  a  newly  developing  Portable Standard LISP.  This
interim   implementation   is   designed    to    explore    LISP
implementations  in  PASCAL  on  the  Apollo  DOMAIN  and similar
machines.  The system consists of a kernel, handcoded in  PASCAL,
with  the  rest  of  the  system  written in LISP and compiled to
PASCAL.





Work supported in part by the National Science  Foundation  under
Grant No. MCS80-07034.
Apollo Pascal LISP      26 February 1982                        1


1. Introduction
1. Introduction
1. Introduction

  In  this  preliminary  report, we describe an implementation of
Standard LISP in PASCAL, PASLSP. Versions of PASLSP have been run
on a number of machines, ranging from an LSI-11  based  TERAK  to
Apollo  and  PERQ.  This report concentrates on the Apollo DOMAIN
implementation. This report is to be read in conjunction with the
Standard LISP report [7]; we will highlight the differences  from
the  functions  documented  in  the  Standard  LISP, describe the
implementation strategy, and discuss future work.


  PASLSP is based on a series of  small  and  medium  sized  LISP
interpreters  that  have been developed at the University of Utah
to explore LISP implementations in higher level  languages.  Each
of  these  LISP  systems  consists of a small kernel handcoded in
some language, with the rest of the system written  in  LISP  and
compiled  to  the  target language.  We have used FORTRAN, PASCAL
and assembly language as targets. The PASLSP  series  use  PASCAL
for  the  kernel, and have a LISP to PASCAL compiler for the rest
of the system.


  Recent work has  concentrated  on  reducing  the  size  of  the
hand-coded  kernel,  and extending the compiler to handle systems
level constructs. This has resulted in a  new  Portable  Standard
LISP,  PSL,  running  on  the  DEC-20  and  VAX-11/750 [1, 4]. An
implementation of PSL for MC68000 is underway. The PSL system  is
a  modern, efficient LISP, written entirely in itself; it uses an
efficient LISP to machine code compiler to  produce  the  kernel,
and  then  the  rest  of LISP is loaded. In the future we hope to
produce a complete PSL targeted at a higher level languages, such
as PASCAL, C or ADA, and this will replace the current PASLSP.


1.1. History of PASLSP
1.1. History of PASLSP
1.1. History of PASLSP

  The system now  called  PASLSP  was  originally  developed  (by
M. Griss and W. Galway), as a small LISP like kernel to support a
small  computer algebra system on an LSI-11 TERAK; this was to be
used as an  answer  analysis  module  within  a  CAI  system [2],
written  entirely  in  PASCAL. It was decided to hand-code a very
small kernel, and compile additional functions  written  in  LISP
(LISP  support functions, parser and simplifier) to PASCAL, using
a modified Portable LISP compiler [3]. This version (call it  V0)
did  not  even  have  user  defined functions, since space on the
TERAK was at a premium.


  About June 1981, PASLSP came  to  the  attention  of  a  number
people  evaluating Apollo's and PERQ's, and it was suggested that
we enhance V0 PASLSP for this purpose. During the space of a  few
Apollo Pascal LISP      26 February 1982                        2


days,  features  taken  from  the  Standard LISP Report and newly
developing PSL files were added to produce PASLSP-V1, running  on
a  DEC-20  and  Terak. This was a fairly complete LISP (including
Catch and Throw), but lacked a few features  (OPEN,  CLOSE,  RDS,
WRS,  PROG,  GO,  RETURN, COMPRESS, EXPLODE, Vectors and Strings,
etc.).  V1 PASLSP was adapted to a PERQ, VAX and Apollo  by  Paul
Milazo  of  Schlumberge  in  the space of a few weeks (we did not
have a PERQ or Apollo at that time).


  We subsequently obtained a PERQ and an Apollo, and recent  work
has  been  aimed  at  producing  an  enhanced  PASLSP  for  these
machines, maintaining all versions in one set  of  source  files.
The  current  system, PASLSP-V2, is produced from a single PASCAL
kernel and set  of  LISP  support  files;  the  machine  specific
features  are  handled  by  a simple Source Code Conditionalizer,
changing the definition of certain constants and data types. Only
a few features of the Standard LISP report are missing, and there
are a number of additions.


1.2. Acknowledgement
1.2. Acknowledgement
1.2. Acknowledgement

  We would like to acknowledge the contributions and  support  of
Eric Benson, Dick Brandt, Will Galway, and Paul Milazo.



2. Features of PASLSP and relation to Standard LISP
2. Features of PASLSP and relation to Standard LISP
2. Features of PASLSP and relation to Standard LISP

  PASLSP  as far as possible provides all the functions mentioned
in the attached  Standard  LISP  Report  (note  the  hand-written
comments  added  to  this  appendix);  some  of the functions are
simply stubs, so that  a  Standard  LISP  Test-file  can  be  run
without major modification.


  PASLSP-V2 does not implement the following features of Standard
LISP:


   a. VECTORS (only a simple garbage collector is used).
   b. Strings  are  implemented  as identifiers (not garbage
      collected).
   c. Integers are limited in size  (INTs  and  FIXNUMs,  no
      BIGNUMs).
   d. FLOATING Point is not implemented.
   e. IDs can not be REMOB'ed or INTERN'd.
   f. Only  3  Input  Channels  and  2  Output  Channels are
      available to OPEN, RDS,  WRS,  and  CLOSE.  Thus  file
      input  statements  can  not  be  nested very deeply in
      files.
Apollo Pascal LISP      26 February 1982                        3


   g. Line,  Page  and Character counting (POSN, LPOSN, etc)
      are not implemented.


  PASLSP-V2 provides some extensions over Standard LISP:


   a. (CATCH form) and (THROW form) and the tagged versions:
      (TCATCH tag form) and (TTHROW tag form)  are  used  to
      implement error and errorset, and higher level control
      functions.
   b. Implicit PROGN in COND, and LAMBDA expressions.
   c. (WHILE pred action-1 action-2 ... action-n).
   d. (DSKIN 'filename) or (DSKIN "filename")


  PASLSP-V2  has not been extensively tested, and there may still
be a number  of  bugs.  While  some  effort  has  been  spent  in
adjusting  PASLSP  to  the  Apollo  DOMAIN,  it is clear that the
various heap sizes are not yet  optimal.    See  appendix  A  for
current  list  of  functions,  and  appendix  B for a copy of the
Standard LISP Report annotated to reflect the current  status  of
PASLSP.



3. Using PASLSP on the Apollo DOMAIN
3. Using PASLSP on the Apollo DOMAIN
3. Using PASLSP on the Apollo DOMAIN

  Initializing the system from the floppy looks like this:


Create a directory (call it pl):
        crd /pl
Mount the floppy:
        mtvol f 1 /f
Copy the files of interest:
        cpt /f/pascallisp /pl

    The files copied will be: paslsp (executable file)
                              paslsp.ini (initialization file)
                              paslsp.tst (a test file)


  Run paslsp as you would any other file.  If you get an error it
is most likely because the paslsp.ini file couldn't be found.  If
this  happens,  locate  paslsp.ini  and  try  again.  If it still
hangs,  try  calling  Ralph  Ottenheimer  at  (801)  355-0226  or
M. Griss at (801) 581-6542.


  Previously  prepared  files  of LISP (e.g., library procedures)
can be input by using the function "DSKIN".  For Example,
Apollo Pascal LISP      26 February 1982                        4


(DSKIN 'Paslsp!.tst) or (DSKIN "Paslsp.tst")


would  load the paslsp test file. The PASLSP test is adapted from
an extensive test of Standard LISP  (avoiding  features  not  yet
implemented).    This  is a good excercise, try it. [Note that if
the filename is given as an ID, that special characters should be
prefaced by an "escape character", ! . This is also the case  for
filenames  in  OPEN.  Alternately the string form may be used, in
that case special characters need not be escaped.]


  Paslsp is "case-sensitive" with regard to identifiers.  All  of
the kernel procedures have upper-case identifiers associated with
them.      This  means  that  ordinarily  the  expression  (dskin
'paslsp!.tst)  would  not  be  recognized  since  "dskin"  is  in
lowercase.  However, there is a global flag !*RAISE which if true
will  convert  all  lower-case  typin to upper-case.  This Apollo
DOMAIN paslsp implementation sets !*RAISE to T as  a  default  by
having  (SETQ !*RAISE T) in the paslsp.ini file.  You may put any
special initialization code you like at the end of paslsp.ini  as
indicated  by  the  comments  in  the  file.    Toggling would be
accomplished by typing the following lisp-expressions:


        (ON !*RAISE)     equivalent to  (SETQ !*RAISE T)
        (OFF !*RAISE)    equivalent to  (SETQ !*RAISE NIL)


  Any Apollo DOMAIN filename (60 characters maximum)is  allowable
as  a paslsp filename.  Remember to prefix all special characters
with an exclamation-mark: "!".  Special  characters  include  all
non-alphanumerics.  For  example:  !*RAISE goforit!! paslsp!.test
!/login!/smith!/foo!.sl .


  If the global !*ECHO is not NIL (default is NIL), input will be
echoed  to  the  selected  output  channel.    It  is   sometimes
convienient to put:


        (SETQ !*ECHO T)


at the beginning of a file to be read by DSKIN, and:


        (SETQ !*ECHO NIL)


at the end.  This will echo the file to the screen (or to a file)
as it is read.
Apollo Pascal LISP      26 February 1982                        5


  Certain low level errors do not display any explanatory message
but  instead display a numeric code (such as *** # 2), below is a
summary of these codes and their meanings:


  (* error codes.  corresponding to tag = errtag. *)
  noprspace = 1;    (* no more "pair space"--can't cons. *)
  notpair = 2;      (* a pair operation attempted on a non-pair.*
  noidspace = 3;    (* no more free identifiers *)
  undefined = 4;    (* used to mark undefined function cells *)
  noint = 5;        (* no free integer space after gc. *)
  notid = 6;        (* id was expected *)



4. Implementation of PASLSP
4. Implementation of PASLSP
4. Implementation of PASLSP


4.1. Building PASLSP
4.1. Building PASLSP
4.1. Building PASLSP

  PASLSP is built in the following steps:


  ______  _____
  Kernel  files,  PAS0.PRE,  and  trailer  file  (main   program)
PASN.PRE are run through a filter program to produce PAS0.PAS and
PASN.PAS,  tailored  to  the  Apollo  DOMAIN (appropriate Include
files, Consts, etc).  This kernel provides the Basic  I/O  (Token
reading  and  printing),  handcoded storage allocator and garbage
collector, lowlevel arithmetic primitives,  lowlevel  calls  (via
Case statement) from LISP to kernel, etc.


  ____  __  ____
  Rest  of  LISP, currently files PAS1.RED, PAS2.RED and PAS3.RED
are compiled to PASCAL using  a  version  of  the  Portable  LISP
Compiler  (PLC) [3].  During  compilation,  a  Symbol Table file,
PASn.SYM is read in and written  out.  These  files  record  (for
"incremental"  compilation)  the  names and ID table locations of
each ID encountered, so that the compiler can refer to an  ID  by
its  offset  in the ID table. LISP constants are also recorded in
the PASn.SYM files. PAS0.SYM is modified by hand as the kernel is
changed.


  The compilation model used  is  that  of  a  Register  Machine:
Arguments  to  LISP  functions  are passed in registers (a PASCAL
array), and the result returned in Register 1. Space is allocated
on a software stack (not the PASCAL  recursion  stack),  for  any
temporaries  or  save arguments required. Short functions usually
do not require any stack. The reason  for  this  choice  was  the
existence of the PLC (targeted at comventional machines), and the
fact  that  inline  access  to  the register array compiles quite
well, while a "PUSH/POP" stack would be much less efficient.
Apollo Pascal LISP      26 February 1982                        6


  ______________
  Initialization.    After  the PAS0.PAS,..PASN.PAS are produced,
the symbol  table  file  (pas3.sym)  is  converted  into  a  file
PASLSP.INI,  which  contains  the  names  of  all  ID's, the LISP
constants used, and also  ID's  for  all  kernel  functions  that
should  be known to the user LISP level. Also produced is a file,
EXEC.PAS, that contains a case statement  associating  each  user
callable  kernel  function  with  an  integer.   The PAS0.PAS ...
PASN.PAS and EXEC.PAS are compiled and linked into an  executable
file. When this file is executed, PASLSP.INI is read in:  each id
is   read   and   stored  in  the  appropriate  location  in  the
symbol-table, the kernel function names have the associated  Case
index  put  into  a function cell, and the LISP s-expressions are
READ in. Finally, some s-expressions will be executed (with care,
the user can add  his  own  expressions,  including  requests  to
(DSKIN 'library), etc.


4.2. Internal data structures
4.2. Internal data structures
4.2. Internal data structures

  The  data  spaces  (or  heaps)  in  PASLSP  are  divided into 4
sections: the pair space, id space (the oblist), string space and
large integer (fixnum) space.  These are all arrays of objects of
the appropriate type (see declarations below).    The  system  is
fully  tagged,  that is, every LISP item has associated with it a
tag field which denotes the type of the item and an 'info'  field
which  either  points  to  the  item  in an array (in the case of
pairs, identifiers and  fixnums),  or  contains  the  information
itself   (in  the  case  of  inums,  character  codes  and  error
conditions). The info field of a code pointer contains the  index
into  a case staement (see procedure 'execute') by means of which
any LISP callable function may be invoked.


itemref = RECORD
           tag:  integer;   (* Small integer denoting  type.   *)
           info: integer;   (* Item or a pointer to it         *)
                            (* depending upon the type.        *)
          END;

   pair = PACKED RECORD
            prcar: itemref;
            prcdr: itemref;
          END;

  ident = PACKED RECORD           (* identifier *)
            idname: stringp;
               val: itemref; (* value *)
             plist: itemref; (* property list *)
           funcell: itemref; (* function cell *)
           idhlink: id_ptr;  (* hash link *)
                   END;
Apollo Pascal LISP      26 February 1982                        7


4.3. Adding user functions to the kernel
4.3. Adding user functions to the kernel
4.3. Adding user functions to the kernel

  It  is  fairly  easy  to  add handcoded Pascal functions to the
kernel so that  they  can  be  called  from  LISP.  For  example,
consider  adding  the  function  SQR(x), that squares its integer
argument.  Since SQR is already the name of  an  existing  PASCAL
function, we will call it "Xsqr" in PASCAL, and SQR in LISP.


  The  function  Xsqr  has  to take its argument from R[1], check
that it is an intege, square the information part, and  retag  as
integer:


PROCEDURE Xsqr;
    VAR i1 : longint;

    BEGIN
    int_val(r[1], i1);  (* Test type and extract Info *)
    mkint(i1 * i1, 1)   (* Square, retag, and put in R[1] *)
    END;


  Now  procedure  Xsqr  needs be to be installed into the EXECUTE
table, so that it can be found as the N'th code item. The  number
of  defined procedures will have to be increased by 1 in the 3'rd
line of  procedure  EXECUTE,  (currently  201  defined),  and  an
additional case added:


202:    Xsqr;


  Note  also  that  this  table  gives the Internal names of each
available procedure, should one of  these  be  required  in  your
handcoded  procedure.    Finally,  the Identifier SQR needs to be
associated with case 202 in PASLSP.INI.  Note that PASLAP.INI has
3 tables of objects, each prefixed by a count and terminated by a
0. The first is the Random ID table, consisting of  special  ID's
used  for  messages  etc.  The  second  block is for S-expression
constants, which get  loaded  into  the  base  of  the  stack  as
Globals.  The next batch are the names of LISP callable functions
in the order  corresponding  to  the  EXECUTE  procedure.  Simply
modify  the  count  form 201 to 202 (or whatever), and add SQR at
the end, just before the 0.


  In general, look for  a  sample  procedure  in  the  kernel  if
possible,  or  in  the  compiled part (although these are hard to
follow), and adapt to the specific needs. Note  the  use  of  the
ALLOC(n)  and  DEALLOC(n)  procedures  to  allocate  a  block  of
temporaries on the stack.  These  should  be  used,  rather  than
Apollo Pascal LISP      26 February 1982                        8


PASCAL  VAR's, since the garbage collector may need to trace from
one of the saved objects.



5. Future work on PASLSP
5. Future work on PASLSP
5. Future work on PASLSP

  PASLSP V2 is based on a fairly old model of  a  portable  LISP,
and  has been used mainly to explore the capbilities of PASCAL as
a target language. In particular, V2 PASCAL is not  yet  powerful
enough to run the PLC compiler itself; instead, the PLC is run on
our  PSL  system on the DEC-20. In order for the full benefits of
PASLSP (or PSL) to be  realized,  the  user  should  be  able  to
compile  his  own LISP modules into PASCAL and link them with the
kernel.  In order to make the system  even  more  adapatable,  we
would  like  to  write even less of the kernel in PASCAL by hand.
This goal has lead us to the development of PSL.


5.1. Goals of the Utah PSL Project
5.1. Goals of the Utah PSL Project
5.1. Goals of the Utah PSL Project

  The goal of the PSL project is  to  produce  an  efficient  and
transportable Standard LISP system that may be used to:


   a. Experimentally    explore    a    variety    of   LISP
      implementation issues  (storage  management,  binding,
      environments, etc.).

   b. Effectively   support   the  REDUCE  computer  algebra
      system [6] on a number of machines.

   c. Provide the same,  uniform,  modern  LISP  programming
      environment  on  all  of  the  machines  that  we  use
      (DEC-20, VAX/750, PDP-11/45, PERQ, and Apollo), of the
      power  and  complexity  of  UCI-LISP,   FranzLISP   or
      MACLISP, with some extensions and enhancements derived
      from LISP Machine LISP or CommonLISP.


                                                      entire
                                                      entire
  The  approach  we  have  been using is to write the entire LISP
system in PSL (using LISP extensions  for  dealing  with  machine
words  and operations), and to bootstrap it to the desired target
machine in two steps:


   a. Cross compile an appropriate kernel  to  the  assembly
      language of the target machine;

   b. Once  the  kernel  is running, use a resident compiler
      and loader, or fast-loader, to build the rest  of  the
      system.
Apollo Pascal LISP      26 February 1982                        9


  The  PASLSP  system,  and other early implementations, have the
problem that the implementation language (PASCAL) is  a  distinct
language  from  LISP, so that communication between "system" code
and "LISP" code was difficult.  We have incorporated all  of  the
good  features of the earlier work into a new efficient LISP-like
systems  language,  SYSLISP,  recoded  all  useful  modules  into
SYSLISP,  and  proceeded  from there.  SYSLISP currently produces
targeted  assembly  code;  earlier  verisions  were  targeted  at
high-level languages such as FORTRAN, PASCAL, C or ADA.  The goal
is  a  portability  strategy  that  leads  to an efficient enough
system  for  a  production  quality,  yet  portable  system.   We
currently  think of the extensions to Standard LISP as having two
levels: the SYSLISP level,  dealing  with  words  and  bytes  and
machine  operations,  enabling us to write essentially all of the
kernel in Standard LISP; and, the LISP level,  incorporating  all
of  the features that make PSL into a modern LISP.  Both modes of
PSL are compiled by an improved version of the Portable  Standard
LISP  Compiler.  The  SYSLISP  mode  of  the  PSL  compiler  does
compile-time  folding  of  constants,  and   more   comprehensive
register  allocation  than  the previous LISP-only version of the
compiler.


  The current state of PSL is fully described  in  an  "overview"
document  obtainable from the authors [5].  Currently PSL runs on
the DEC-20 under TOPS-20, and on the DEC VAX-11/750  under  Unix.
We  are  now concentrating on the MC68000 PSL for the Apollo. All
of the code-generators and assembler support is complete,  and  a
number  of  large  files have been compiled from LISP to assembly
code, and correctly assembled and executed on the Apollo, testing
basic I/O and arithmetic. We are now in the  process  of  writing
the  PSL  support code (small functions in LAP), and testing that
various decisions about register and memory  usage  are  correct.
Based  on  the  development  history on the VAX, we are about 1-2
months away from a preliminary PSL on the Apollo.



6. References
6. References
6. References

[1]   Benson, E. and Griss, M. L.
      _______  _ ________ ____ _____ _______ ______________
      SYSLISP: A portable LISP based systems implementation
         ________
         language.
      Utah Symbolic Computation Group, Report UCP-81, University
         of Utah, February, 1981.

[2]   Brandt, R. C. and Knapp, B. H.
      The University of Utah Video Computer Authoring System.
         ___________ __ ___ _________ __ ________ __________
      In Proceedings of the Symposium on Learning Technology,
         pages 18-23.  Orlando, Florida, Feb, 1981.
Apollo Pascal LISP      26 February 1982                       10


[3]   Griss, M. L.; Kessler, R. R.; and Maguire, G. Q. Jr.
      TLISP - A Portable LISP Implemented in P-code.
         ___________ __ _______ __
      In Proceedings of EUROSAM 79, pages 490-502.  ACM, June,
         1979.

[4]   Griss, M. L. and Morrison, B.
      ___ ________ ________ ____ _____ ______
      The Portable Standard LISP Users Manual.
      Utah Symbolic Computation Group,  TR-10, University of
         Utah, March, 1981.

[5]   Griss, M. L.
      ________ ________ ____  _ _____ ________
      Portable Standard LISP: A Brief Overview.
      Utah Symbolic Computation Group, Operating Note 58,
         University of Utah, October, 1981.

[6]   Hearn, A. C.
      ______ _ _____ ______
      REDUCE 2 Users Manual.
      Utah Symbolic Computation Group UCP-19, University of Utah,
         1973.

[7]   Marti, J. B., et al.
      Standard LISP Report.
      _______ _______
      SIGPLAN Notices 14(10):48-68, October, 1979.



APPENDIX A:  A List of Current PASLSP Functions and Globals
APPENDIX A:  A List of Current PASLSP Functions and Globals
APPENDIX A:  A List of Current PASLSP Functions and Globals


____ ________ __________ ___ ________ ____ ______
Lisp Callable Functions, see Standard LISP Report
!*FIRST!-PROCEDURE      The top loop LISP reader
ABS
ADD1
AND
APPEND
APPLY
APPLY1                  (APPLY f (LIST u))
ASSOC
ATOM
ATSOC
CAAAAR
CAAADR
CAAAR
CAADAR
CAADDR
CAADR
CAAR
CADAAR
CADADR
CADAR
CADDAR
CADDDR
Apollo Pascal LISP      26 February 1982                       11


CADDR
CADR
CAR
CATCH
CDAAAR
CDAADR
CDAAR
CDADAR
CDADDR
CDADR
CDAR
CDDAAR
CDDADR
CDDAR
CDDDAR
CDDDDR
CDDDR
CDDR
CDR
CLOSE
CODEP
COMPRESS
COND
CONS
CONSTANTP
DE
DEFLIST
DELATQ          (DELATQ 'X alist) deletes (X . any) from alist
DELETE
DELQ             Efficient DELETE (using EQ)
DF
DIFFERENCE
DIGIT
DIVIDE
DM
DN
DSKIN           (DSKIN file-id)
EOFP            (EOFP channel)
EQ
EQCAR
EQN
EQUAL
ERROR
ERRORSET
ERRPRT           Prints message with *'s
EVAL
EVLAM            Evaluates a LAMBDA expression
EVLIS
EXPAND
EXPLODE
EXPT
FASTSTAT        Prints RECLAIM message
Apollo Pascal LISP      26 February 1982                       12


FIX
FIXP
FLAG
FLAG1           (FLAG (LIST x) y)
FLAGP
FLOAT
FLOATP
FLUID
FLUIDP
FUNCELL         Accesses function cell
FUNCTION
GENSYM
GET
GETD
GETV
GLOBAL
GLOBALP
GO
GREATERP
IDP
INTERN
LBIND1          Binds a single ID in LAMBDA
LBINDN
LENGTH
LESSP
LIST2           For efficent LIST compilation
LIST3
LIST4
LIST5
LITER
MAP
MAPC
MAPCAN
MAPCAR
MAPCON
MAPLIST
MAX
MAX2
MEMBER
MEMQ
MIN
MIN2
MINUS
MINUSP
MKVECT
MSGPRT
NCONC
NCONS
NOT
NULL
NUMBERP
ONEP
Apollo Pascal LISP      26 February 1982                       13


OPEN
OR
ORDERP
P!.N                    Evaluates Implicit PROGNs
PAIR
PAIRP
PBIND1                  PROG binding
PBINDN
PLIST                   Access full property list
PLUS
PLUS2
PRIN1
PRIN2
PRIN2T
PRIN2TL
PRINC
PRINT
PROG
PROG2
PROGG0131
PROGN
PUT
PUTC
PUTD
PUTL
PUTV
QUOTIENT
RDEVPR          A read-eval-print loop
RDS
RDTOK
READ
READCH
RECLAIM
REMAINDER
REMD
REMFLAG
REMFLAG1
REMOB
REMPROP
RETURN
REV
REVERSE
REVX
RLIST
RPLACA
RPLACD
SASSOC
SET
SETFUNCELL
SETPLIST
SETVALUE
STRINGP         Equivalent to IDP
Apollo Pascal LISP      26 February 1982                       14


SUB1
SUBLIS
SUBST
TCATCH
TERPRI
THROW
TIMES
TIMES2
TOKEN
TTHROW
UNBIND1
UNBINDN
UNBINDTO
UNFLUID
UPBV
VALUE
VECTORP
WHILE
WRS
WRTOK
XAPPLY
XCONS
ZEROP
___________ _______
Interesting Globals
!*RAISE         Raise lower case typing to upper case if not NIL
!*ECHO          Selected input to selected output if not NIL.
BSTK!*          Holds old values of rebound IDS
EMSG!*          Error message in most recent call on ERROR
ENUM!*          Error number in most recent call on ERROR.
INITFORM!*      First Expression EVAL'ed
THROWING!*      Indicates if throwing
THROWTAG!*      Indicates TAG in TTHROW
TOK!*           Holds last token scanned
TOKTYPE         Indicates type of token scanned:
                        1: integer
                        2: id
                        3: character
Apollo Pascal LISP      26 February 1982                        i


                        Table of Contents
                        Table of Contents
                        Table of Contents

1. Introduction                                                 1
     1.1. History of PASLSP                                     1
     1.2. Acknowledgement                                       2
2. Features of PASLSP and relation to Standard LISP             2
3. Using PASLSP on the Apollo DOMAIN                            3
4. Implementation of PASLSP                                     5
     4.1. Building PASLSP                                       5
     4.2. Internal data structures                              6
     4.3. Adding user functions to the kernel                   7
5. Future work on PASLSP                                        8
     5.1. Goals of the Utah PSL Project                         8
6. References                                                   9
APPENDIX A:  A List of Current PASLSP Functions and Globals    10


REDUCE Historical
REDUCE Sourceforge Project | Historical SVN Repository | GitHub Mirror | SourceHut Mirror | NotABug Mirror | Chisel Mirror | Chisel RSS ]