Artifact 04577be7969a14bff26b7ba708a1222776e5be15cf7dc88f4a3fe48ed761a0c5:
- Executable file
r37/lisp/csl/cslbase/fasl.c
— part of check-in
[f2fda60abd]
at
2011-09-02 18:13:33
on branch master
— Some historical releases purely for archival purposes
git-svn-id: https://svn.code.sf.net/p/reduce-algebra/code/trunk/historical@1375 2bfe0521-f11c-4a00-b80e-6202646ff360 (user: arthurcnorman@users.sourceforge.net, size: 119509) [annotate] [blame] [check-ins using] [more...]
/* fasl.c Copyright (C) 1990-2002 Codemist Ltd */ /* * Binary file support for faster loading of precompiled code etc. */ /* * This code may be used and modified, and redistributed in binary * or source form, subject to the "CCL Public License", which should * accompany it. This license is a variant on the BSD license, and thus * permits use of code derived from this in either open and commercial * projects: but it does require that updates to this code be made * available back to the originators of the package. * Before merging other code in with this or linking this code * with other packages or libraries please check that the license terms * of the other material are compatible with those of this. */ /* Signature: 732b5f7b 10-Oct-2002 */ #include <stdarg.h> #include <string.h> #include <ctype.h> #include "machine.h" #include "tags.h" #include "cslerror.h" #include "externs.h" #include "read.h" #include "stream.h" #include "arith.h" #include "entries.h" #ifdef TIMEOUT #include "timeout.h" #endif #ifdef SOCKETS #include "sockhdr.h" #endif CSLbool fasl_output_file = NO; /* An output file is open? */ static int skipping_input = 0, skipping_output = 0; static int32 recent_pointer = 0, hits = 0 , misses = 0, fasl_byte_count = 0; static CSLbool fp_rep_set = NO; /* * FASL files are binary, and are treated as containing sequences of * unsigned bytes, where the bytes are names as in the following set * of definitions, which MUST be kept in step with the code that * creates FASL files. I expect FASL files to be portable between * computers that use the same character set, but names of symbols * will get totally scrambled between ASCII and EBCDIC hosts. */ #define F_END 0 /* end of FASL file */ #define F_NIL 1 /* the symbol NIL */ #define F_TRU 2 /* the symbol T */ #define F_EXT 3 /* used to get operands > 8 bits into other codes */ #define F_INT 4 /* positive fixnum */ #define F_NEG 5 /* negative fixnum */ #define F_BIG 6 /* bignum */ #define F_RAT 7 /* ratio */ #define F_CPX 8 /* complex number */ #define F_FPS 9 /* short float */ #define F_FPF 10 /* single float */ #define F_FPD 11 /* double float */ #define F_FPL 12 /* long float */ #define F_SYM 13 /* symbol, general length */ #define F_ID1 14 /* symbol with 1-character name */ #define F_ID2 15 /* symbol with 2-character name */ #define F_ID3 16 /* etc */ #define F_ID4 17 #define F_ID5 18 #define F_ID6 19 #define F_ID7 20 #define F_ID8 21 #define F_ID9 22 #define F_IDA 23 #define F_IDB 24 #define F_IDC 25 #define F_IDD 26 #define F_IDE 27 #define F_IDF 28 /* symbol with 15 character name */ #define F_STR 29 /* string */ #define F_BP0 30 /* bytecode string for binary code (0 - 255 bytes) */ #define F_BP1 31 /* 256 - 511 bytes of BPS */ #define F_BP2 32 /* 512 - 767 bytes of BPS */ #define F_BP3 33 /* 768 - 1023 bytes of BPS */ #define F_HASH 34 /* hash table */ #define F_VEC 35 /* simple Lisp vector */ #define F_LST 36 /* list, general length */ #define F_LS1 37 /* list of length 1 */ #define F_LS2 38 /* list of length 2 */ #define F_LS3 39 /* list of length 3 */ #define F_LS4 40 /* list of length 4 */ #define F_DOT 41 /* list ending with dotted item */ #define F_QUT 42 /* (QUOTE xx) */ #define F_DEF0 43 /* function definition, 0 args */ #define F_DEF1 44 /* function definition, 1 arg */ #define F_DEF2 45 /* function definition, 2 args */ #define F_DEF3 46 /* function definition, 3 args */ #define F_DEFN 47 /* function definition, 4 or more args */ #define F_REP 48 /* followed by 2 bytes giving FP rep */ #define F_CHAR 49 /* bits, font, code */ #define F_SDEF 50 /* associated with fn definition - Lisp coded version */ #define F_STRUCT 51 /* Structure or e-vector */ #define F_DEFOPT 52 /* function definition, &optional args */ #define F_DEFHOPT 53 /* function definition, &optional args + initform */ #define F_DEFREST 54 /* function definition, &optional/&rest args */ #define F_DEFHREST 55 /* function definition, &optional/&rest + initform */ #define F_ARRAY 56 /* Common Lisp style general array */ #define F_BITVEC 57 /* Bit-vector */ #ifdef COMMON #define F_PKGINT 58 /* abc::def (coded as m, n, c1..cm, c1..cn) */ /* m=0 can be used for gensyms, as in #:xxx */ #else #define F_GENSYM 58 /* coded as n, c1..cn. Eg just like PKGINT,0 */ #endif #define F_PKGEXT 59 /* abc:def (m=0 => keyword) */ #define F_OLD 60 /* all remaining codes denote recently seen symbols */ #define KEEP_RECENT (256 - F_OLD) #define MAX_OBJECT 256 /* limit on symbol & number length */ #ifdef DEBUG_FASL static char *fasl_code_names[] = { "END", "NIL", "TRU", "EXT", "INT", "NEG", "BIG", "RAT", "CPX", "FPS", "FPF", "FPD", "FPL", "SYM", "ID1", "ID2", "ID3", "ID4", "ID5", "ID6", "ID7", "ID8", "ID9", "IDA", "IDB", "IDC", "IDD", "IDE", "IDF", "STR", "BP0", "BP1", "BP2", "BP3", "HASH", "VEC", "LST", "LS1", "LS2", "LS3", "LS4", "DOT", "QUT", "DEF0", "DEF1", "DEF2", "DEF3", "DEFN", "REP", "CHAR", "SDEF", "STRUCT", "DEFOPT", "DEFHOPT", "DEFREST", "DEFHREST", #ifdef COMMON "ARRAY", "BITVEC", "PKGINT", "PKGEXT" #else "ARRAY", "BITVEC", "GENSYM", "PKGEXT" #endif }; static char old_name[8]; static char *fasl_code(int n) { if (n >= F_OLD) { sprintf(old_name, "OLD%d", n - F_OLD); return old_name; } else return fasl_code_names[n]; } #endif #define boffo_char(i) celt(boffo, i) static int fp_rep = 0; /* representation used when FASL file was written */ static Lisp_Object fastread(void); #ifdef COMMON static char package_name[256]; #endif #ifdef DEBUG_FASL static int IgetcDebug() { int k = Igetc(); trace_printf("Igetc = %d/%.2x/%s\n", k, k, fasl_code(k)); return k; } #define Igetc() IgetcDebug() static int IreadDebug(char *x, int n) { int i; int k = Iread(x, n); trace_printf("Iread(%d) = %d:", n, k); for (i=0; i<k; i++) { trace_printf(" %d/%x", x[i], x[i]); if (32 <= x[i] && x[i] < 0x7f) trace_printf("/'%c'", x[i]); } trace_printf("\n"); return k; } #define Iread(a, n) IreadDebug(a, n) #endif static Lisp_Object fastread1(int32 ch, int32 operand) { Lisp_Object nil = C_nil; Lisp_Object r = nil, w; #ifdef COMMON int operand0; #endif int32 p; switch (ch) { default: /* a recently-mentioned item */ if (ch < F_OLD) { err_printf("\nError at byte %ld : %#.2x/%d\n", (long)fasl_byte_count, ch & 0xff, ch & 0xff); return aerror("bad byte in FASL file"); } if (operand != 0) { operand = ((operand-1) << 7) + (ch - F_OLD); r = faslgensyms; while (operand != 0) { r = qcdr(r); operand--; } return qcar(r); } operand = recent_pointer - (ch - F_OLD); if (operand < 0) operand += KEEP_RECENT; r = elt(faslvec, operand); return r; #ifdef COMMON case F_PKGINT: case F_PKGEXT: { int ch1 = Igetc(); fasl_byte_count++; if (ch1 == EOF) return aerror("premature EOF in FASL file"); operand0 = ch1 & 0xff; ch1 = Igetc(); if (ch1 == EOF) return aerror("premature EOF in FASL file"); operand = (operand << 8) + ((int32)ch1 & 0xff); if (operand0 != 0) { if (Iread(package_name, operand0) != operand0) return aerror("FASL file corrupted"); fasl_byte_count += operand0; r = find_package(package_name, operand0); if (r == nil) { err_printf( "+++ Package %s not found, using current package\n", package_name); r = CP; } } else r = qvalue(keyword_package); if (Iread(&boffo_char(0), operand) != operand) return aerror("FASL file corrupted"); fasl_byte_count += operand; if (skipping_input == 2) r = nil; else if (ch == F_PKGINT) { if (operand0 == 0) { r = iintern(boffo, (int32)operand, CP, 0); errexit(); r = Lgensym2(nil, r); } else r = iintern(boffo, (int32)operand, r, 0); } else if (r == qvalue(keyword_package)) r = iintern(boffo, (int32)operand, r, 0); else { push(r); w = iintern(boffo, (int32)operand, r, 4); pop(r); errexit(); if (mv_2 == nil) { err_printf("+++ Symbol %.*s not external in %s\n", (int)operand, &celt(boffo, 0), package_name); err_printf("+++ Treating as an internal symbol...\n"); w = iintern(boffo, (int32)operand, r, 0); } r = w; } errexit(); /* * The KEEP_RECENT most recently used symbols are stored in a cyclic buffer * so that if re-used they will be rapidly available. See comment under * F_GENSYM for a delicacy here. */ if (skipping_input == 0 || (ch == F_PKGINT && operand0 == 0)) /* NB keep gensyms! */ { recent_pointer++; if (recent_pointer == KEEP_RECENT) recent_pointer = 0; w = elt(faslvec, recent_pointer); if (qpackage(w) == nil) /* eg a gensym */ { push(r); #ifdef DEBUG_FASL trace_printf("recording gensym "); prin_to_trace(w); trace_printf("\n"); #endif w = cons(w, faslgensyms); pop(r); errexit(); faslgensyms = w; } elt(faslvec, recent_pointer) = r; #ifdef DEBUG_FASL trace_printf("recording "); prin_to_trace(r); trace_printf("\n"); #endif } return r; } #else /* COMMON */ case F_GENSYM: { int ch1 = Igetc(); if (ch1 == EOF) return aerror("premature EOF in FASL file"); operand = (operand << 8) + ((int32)ch1 & 0xff); if (Iread(&boffo_char(0), operand) != operand) return aerror("FASL file corrupted"); fasl_byte_count += operand; if (skipping_input == 2) r = nil; r = iintern(boffo, (int32)operand, CP, 0); errexit(); r = Lgensym2(nil, r); errexit(); /* * The KEEP_RECENT most recently used symbols are stored in a cyclic buffer * so that if re-used they will be rapidly available. Note as a real curiosity * then gensyms will be stored in this even if skipping_input is non-zero. * this is essential so that gensyms within saved-definitions are * can get processed properly. Specifically so that repeated use of a gensym * within a saved definition leads to two references to the same thing * rather than to the creation of two new gensyms. The same issue should * arise for un-interned Common Lisp symbols. */ recent_pointer++; if (recent_pointer == KEEP_RECENT) recent_pointer = 0; w = elt(faslvec, recent_pointer); if (qheader(w) & SYM_ANY_GENSYM) { push(r); #ifdef DEBUG_FASL trace_printf("recording gensym "); prin_to_trace(w); trace_printf("\n"); #endif w = cons(w, faslgensyms); pop(r); errexit(); faslgensyms = w; } elt(faslvec, recent_pointer) = r; #ifdef DEBUG_FASL trace_printf("recording "); prin_to_trace(r); trace_printf("\n"); #endif return r; } #endif /* COMMON */ /* these all have a 1-byte arg to follow */ case F_INT: case F_NEG: case F_BIG: case F_SYM: case F_STR: case F_BP0: case F_BP1: case F_BP2: case F_BP3: case F_HASH: case F_VEC: case F_STRUCT: case F_LST: case F_DOT: { int ch1 = Igetc(); fasl_byte_count++; if (ch1 == EOF) return aerror("premature EOF in FASL file"); operand = (operand << 8) + ((int32)ch1 & 0xff); } switch (ch) { default: /* can never occur */ case F_INT: /* positive fixnum */ return fixnum_of_int(operand); case F_NEG: /* negative fixnum */ return fixnum_of_int(-operand); case F_BIG: r = getvector(TAG_NUMBERS, TYPE_BIGNUM, CELL+operand); /* I tidy up the padding word if needbe */ #ifdef ADDRESS_64 if ((operand & 4) != 0) #endif if ((operand & 4) == 0) *(int32 *)((char *)r + CELL + 4 - TAG_NUMBERS + operand) = 0; /* * I accumulate the numeric components of the bignum here by steam - one * byte at a time - so that fasl files made on a machine with one byte-order * can be used on machines with the other. I do not expect that there * will be many bignums in fasl files, and thus this is not a performance * critical area. */ { int32 i; for (i = 0; i<operand; i+=4) { unsigned32 v = (int32)Igetc() & 0xff; v = (v << 8) | ((int32)Igetc() & 0xff); v = (v << 8) | ((int32)Igetc() & 0xff); v = (v << 8) | ((int32)Igetc() & 0xff); *(unsigned32 *)((char *)r + CELL - TAG_NUMBERS + i) = v; fasl_byte_count += 4; } } return r; case F_SYM: /* n characters making a symbol */ if (Iread(&boffo_char(0), operand) != operand) return aerror("FASL file corrupted"); fasl_byte_count += operand; /* * skipping_input is usually zero. If it is 1 then I read in expressions * as normal save that I do not update the recently-mentioned-symbol cache. * skipping_input==2 causes me to parse the input FASL file but not * return a useful result. Well actually everything will be read in * as normal save that symbols will all be mapped onto NIL. */ if (skipping_input == 2) r = nil; else r = iintern(boffo, operand, CP, 0); errexit(); /* * The KEEP_RECENT most recently used symbols are stored in a cyclic buffer * so that if re-used they will be rapidly available. */ if (skipping_input == 0) { recent_pointer++; if (recent_pointer == KEEP_RECENT) recent_pointer = 0; w = elt(faslvec, recent_pointer); #ifdef COMMON if (qpackage(w) == nil) #else if (qheader(w) & SYM_ANY_GENSYM) #endif { push(r); #ifdef DEBUG_FASL trace_printf("recording gensym "); prin_to_trace(w); trace_printf("\n"); #endif w = cons(w, faslgensyms); pop(r); errexit(); faslgensyms = w; } elt(faslvec, recent_pointer) = r; #ifdef DEBUG_FASL trace_printf("recording "); prin_to_trace(r); trace_printf("\n"); #endif } return r; case F_STR: /* n characters making a string */ r = getvector(TAG_VECTOR, TYPE_STRING, CELL+operand); errexit(); { char *s = (char *)r - TAG_VECTOR + CELL; int l = operand & 7; #ifdef ADDRESS_64 switch (l) { case 1: case 2: case 3: *(int32 *)(s + operand - l) = 0; case 4: case 5: case 6: case 7: *(int32 *)(s + operand - l + 4) = 0; case 0: break; } #else switch (l) { case 5: case 6: case 7: *(int32 *)(s + operand - l + 8) = 0; case 0: case 1: case 2: case 3: *(int32 *)(s + operand - l + 4) = 0; case 4: break; } #endif if (Iread(s, operand) != operand) return aerror("FASL file corrupted"); fasl_byte_count += operand; } return r; case F_BP3: /* n + 768 bytes of BPS */ operand += 256; /* drop through */ case F_BP2: /* n + 512 bytes of BPS */ operand += 256; /* drop through */ case F_BP1: /* n + 256 bytes of BPS */ operand += 256; /* drop through */ case F_BP0: /* n bytes making BPS */ /* See the other place where qvalue(savedef) == savedef is tested. */ if (qvalue(savedef) == savedef) { int32 i; for (i=0; i<operand; i++) Igetc(); fasl_byte_count += operand; return nil; } else { r = getcodevector(TYPE_BPS, operand+CELL); errexit(); if (Iread(data_of_bps(r), operand) != operand) return aerror("FASL file corrupted"); fasl_byte_count += operand; return r; } case F_HASH: case F_STRUCT: case F_VEC: /* normal vector with n entries */ r = getvector_init(CELL*(operand+1), nil); errexit(); if (ch == F_STRUCT) vechdr(r) ^= (TYPE_STRUCTURE ^ TYPE_SIMPLE_VEC); else if (ch == F_HASH) vechdr(r) ^= (TYPE_HASH ^ TYPE_SIMPLE_VEC); for (p=0; p<operand; p++) { push(r); w = fastread(); pop(r); errexit(); elt(r, p) = w; } if (ch == F_HASH) { /* * If I have just read in a hash table that was built on EQ or EQL I will * need to rehash it now. */ if (elt(r, 0) == fixnum_of_int(0) || elt(r, 0) == fixnum_of_int(1) || !is_fixnum(elt(r, 0))) { Lisp_Object v; rehash_this_table(v = elt(r, 4)); push(r); v = ncons(v); pop(r); errexit(); qcdr(v) = eq_hash_tables; eq_hash_tables = v; } } return r; case F_LST: /* build list of length n */ case F_DOT: /* dotted list with n values */ if (ch == F_LST) r = nil; else { r = fastread(); errexit(); } for (p = 0; p<operand; p++) { push(r); w = fastread(); pop(r); errexit(); r = cons(w, r); errexit(); } return r; } } } static CSLbool just_reading_source = NO; static Lisp_Object fastread(void) { int32 operand = 0, ch = Igetc(); Lisp_Object nil = C_nil; Lisp_Object r = nil, w; fasl_byte_count++; if (ch == EOF) return aerror("premature EOF in FASL file"); ch &= 0xff; for (;;) { switch (ch) { case F_END: /* marks end of file */ return CHAR_EOF; case F_NIL: /* represents the value NIL */ return nil; case F_TRU: /* represents the value T */ return lisp_true; case F_QUT: /* (QUOTE <next thing>) */ r = fastread(); errexit(); return list2(quote_symbol, r); case F_SDEF: /* * I am THINKING about an option that avoids reading in definitions here * when *SAVEDEF is nil, and just skips the bytes in the FASL file. The * problem with doing so is that of the table of recently referred to * symbols - which must be kept in step between FASL writing and reading * whether or not *SAVEDEF is active. */ if (qvalue(savedef) == nil) skipping_input = 2; else skipping_input = 1; #ifdef __alpha /* * This is a fairly shameless hack to try to work around a bug that * appears to exist when CSL is compiled using some releases of the * C compiler that comes with DECs OSF on Alpha-based computers. I found * experimentally that adding a function call here seemed to mend things. * Originally this was a debug-print statement, but here I have just a * dummy function call. The observed problem was the variable * skipping_input not getting set properly, leading to shambles later on. * ACN: August 1996 */ dummy_function_call("ALPHA", skipping_input); #endif r = fastread(); skipping_input = 0; errexit(); ch = Igetc(); fasl_byte_count++; if (ch == EOF) return aerror("premature EOF in FASL file"); ch &= 0xff; /* And drop through */ case F_DEF0: /* introduces defn of compiled code */ case F_DEF1: case F_DEF2: case F_DEF3: case F_DEFN: case F_DEFOPT: case F_DEFHOPT: case F_DEFREST: case F_DEFHREST: { Lisp_Object name, bps, env; push(r); name = fastread(); pop(r); errexit(); push(name); if (qvalue(savedef) != nil) { if (just_reading_source) { Lisp_Object w; #ifdef COMMON w = get(name, loadsource_symbol, nil); #else w = get(name, loadsource_symbol); #endif if (w == nil && qvalue(loadsource_symbol) != nil) w = lisp_true; if (w != nil) { Lisp_Object w1, chk = w; CSLbool include = YES; push3(chk, name, r); if (consp(w)) { if (integerp(qcar(w))) { chk = qcar(w); w = list2star(qcar(w), current_module, qcdr(w)); } else w = cons(current_module, w); } else { if (integerp(w)) w = list2(w, current_module); else w = ncons(current_module); } pop3(r, name, chk); errexit(); /* * If the load-source property is an integer then the source is only * loaded if the definition concerned matched that as an MD5 checksum. * (well actually I compute MD5 then truncate the digest to 60 bits). * (I allow a property (integer ...) too). * If load-source started off as just T then the last definition loaded * will be the one that survives, but the load-source property will * be replaced by a list of the modules that provided definitions (which * may or may not be conflicting ones). */ if (integerp(chk) != nil && consp(r)) { push4(name, r, chk, w); w1 = Lmd60(nil, qcdr(r)); pop4(w, chk, r, name); errexit(); push4(name, r, chk, w); include = numeq2(w1, chk); #ifdef DEBUG_FASL prin_to_trace(name); trace_printf("\n"); prin_to_trace(r); trace_printf("\n"); prin_to_trace(w1); trace_printf("\n"); prin_to_trace(w); trace_printf("\n"); prin_to_trace(chk); trace_printf("\n"); trace_printf(" MD5 equality = %d\n", include); #endif pop4(w, chk, r, name); errexit(); } #ifdef DEBUG_FASL else trace_printf("simple case\n"); #endif if (include) { push2(name, r); putprop(name, loadsource_symbol, w); #ifdef DEBUG_FASL trace_printf("record sourceloc\n"); #endif pop2(r, name); errexit(); #ifdef DEBUG_FASL trace_printf("record savedef\n"); #endif push2(name, r); /* here I build up a list of the functions whose definitions were loaded */ w1 = cons(name, qvalue(work_symbol)); pop2(r, name); errexit(); qvalue(work_symbol) = w1; putprop(name, savedef, r); } } } else putprop(name, savedef, r); errexit(); } bps = fastread(); errexitn(1); push(bps); env = fastread(); errexitn(2); pop(bps); if (is_fixnum(bps)) { int nn = int_of_fixnum(bps); pop(name); if (qvalue(savedef) != savedef) { switch (ch) { case F_DEF0: switch (nn) { case 0: set_fns(name, wrong_no_na, wrong_no_nb, f0_as_0); break; default:goto bad_tail; } break; case F_DEF1: switch (nn) { case 0: set_fns(name, f1_as_0, too_many_1, wrong_no_1); break; case 1: set_fns(name, f1_as_1, too_many_1, wrong_no_1); break; default:goto bad_tail; } break; case F_DEF2: switch (nn) { case 0: set_fns(name, too_few_2, f2_as_0, wrong_no_2); break; case 1: set_fns(name, too_few_2, f2_as_1, wrong_no_2); break; case 2: set_fns(name, too_few_2, f2_as_2, wrong_no_2); break; default:goto bad_tail; } break; case F_DEF3: switch (nn) { case 0: set_fns(name, wrong_no_na, wrong_no_nb, f3_as_0); break; case 1: set_fns(name, wrong_no_na, wrong_no_nb, f3_as_1); break; case 2: set_fns(name, wrong_no_na, wrong_no_nb, f3_as_2); break; case 3: set_fns(name, wrong_no_na, wrong_no_nb, f3_as_3); break; default:goto bad_tail; } break; case F_DEFN: switch (nn) { default:goto bad_tail; } break; case F_DEFOPT: switch (nn) { default:goto bad_tail; } break; case F_DEFHOPT: switch (nn) { default:goto bad_tail; } break; case F_DEFREST: switch (nn) { default:goto bad_tail; } break; case F_DEFHREST: switch (nn) { default:goto bad_tail; } break; } if ((qheader(name) & (SYM_C_DEF | SYM_CODEPTR)) == (SYM_C_DEF | SYM_CODEPTR)) { #ifdef NOISY_RE_PROTECTED_FNS if (verbos_flag & 2) { freshline_trace(); trace_printf("+++ Protected function "); prin_to_trace(name); trace_printf("\n"); } #endif } else { qenv(name) = env; if ((qheader(name) & SYM_C_DEF) != 0) lose_C_def(name); } } return nil; bad_tail: err_printf("+++++ Bad tailcall combination %d %d\n", ch, nn); return nil; } env = cons(bps, env); pop(name); errexit(); /* * If the variable !*savedef has !*savedef as its value I will not instate * function definitions here at all. This is a very odd thing to do, but * turns out to help me save memory when I want to load FASL files in order * to retrieve the Lisp form of definitions but I do not really want the * code present instated. */ if (qvalue(savedef) != savedef) { switch (ch) { case F_DEF0: set_fns(name, wrong_no_0a, wrong_no_0b, bytecoded0); break; case F_DEF1: set_fns(name, bytecoded1, too_many_1, wrong_no_1); break; case F_DEF2: set_fns(name, too_few_2, bytecoded2, wrong_no_2); break; case F_DEF3: set_fns(name, wrong_no_3a, wrong_no_3b, bytecoded3); break; case F_DEFN: set_fns(name, wrong_no_na, wrong_no_nb, bytecodedn); break; case F_DEFOPT: set_fns(name, byteopt1, byteopt2, byteoptn); break; case F_DEFHOPT: set_fns(name, hardopt1, hardopt2, hardoptn); break; case F_DEFREST: set_fns(name, byteoptrest1, byteoptrest2, byteoptrestn); break; case F_DEFHREST: set_fns(name, hardoptrest1, hardoptrest2, hardoptrestn); break; } if ((qheader(name) & (SYM_C_DEF | SYM_CODEPTR)) == (SYM_C_DEF | SYM_CODEPTR)) { #ifdef NOISY_RE_PROTECTED_FNS if (verbos_flag & 2) { freshline_trace(); trace_printf("+++ Protected function "); prin_to_trace(name); trace_printf("\n"); } #endif } else { qenv(name) = env; if ((qheader(name) & SYM_C_DEF) != 0) lose_C_def(name); } if (qvalue(comp_symbol) != nil && qfn1(native_symbol) != undefined1) { name = ncons(name); nil = C_nil; if (!exception_pending()) (qfn1(native_symbol))(qenv(native_symbol), name); } } return nil; } case F_LS4: push(r); w = fastread(); pop(r); errexit(); r = cons(w, r); errexit(); /* DROP THROUGH */ case F_LS3: push(r); w = fastread(); pop(r); errexit(); r = cons(w, r); errexit(); /* DROP THROUGH */ case F_LS2: push(r); w = fastread(); pop(r); errexit(); r = cons(w, r); errexit(); /* DROP THROUGH */ case F_LS1: push(r); w = fastread(); pop(r); errexit(); r = cons(w, r); errexit(); return r; case F_CHAR: /* * Note that in Kanji mode the interpretation here should be that the 16 bit * character code is specified by bits/code. I ensure that when FASL files * are written this arrangement holds. */ { int32 bits, font, code; bits = Igetc(); fasl_byte_count++; if (bits == EOF) return aerror("premature EOF in FASL file"); font = Igetc(); fasl_byte_count++; if (font == EOF) return aerror("premature EOF in FASL file"); code = Igetc(); fasl_byte_count++; if (code == EOF) return aerror("premature EOF in FASL file"); return pack_char(bits, font & 0xff, code & 0xff); } case F_REP: { int c1, c2; c1 = Igetc(); fasl_byte_count++; if (c1 == EOF) return aerror("premature EOF in FASL file"); c2 = Igetc(); fasl_byte_count++; if (c2 == EOF) return aerror("premature EOF in FASL file"); fp_rep = (c1 & 0xff) + ((c2 & 0xff) << 8); ch = Igetc(); fasl_byte_count++; if (ch == EOF) return aerror("premature EOF in FASL file"); ch &= 0xff; continue; } #ifdef COMMON case F_RAT: w = fastread(); errexit(); push(w); r = fastread(); pop(w); errexit(); return make_ratio(w, r); case F_CPX: w = fastread(); errexit(); push(w); r = fastread(); pop(w); errexit(); return make_complex(w, r); case F_FPS: { Lisp_Object w1; if (Iread((char *)&w1, 4) != 4) return aerror("FASL file corrupted"); fasl_byte_count += 4; convert_fp_rep(&w1, fp_rep, current_fp_rep, 0); return w1; } case F_FPF: r = getvector(TAG_BOXFLOAT, TYPE_SINGLE_FLOAT, sizeof(Single_Float)); errexit(); if (Iread((char *)r + CELL - TAG_BOXFLOAT, 4) != 4) return aerror("FASL file corrupted"); fasl_byte_count += 4; convert_fp_rep((char *)r + CELL - TAG_BOXFLOAT, fp_rep, current_fp_rep, 1); return r; #endif case F_FPD: r = getvector(TAG_BOXFLOAT, TYPE_DOUBLE_FLOAT, sizeof(Double_Float)); errexit(); *(int32 *)((char *)r + CELL - TAG_BOXFLOAT) = 0; if (Iread((char *)r + 8 - TAG_BOXFLOAT, 8) != 8) return aerror("FASL file corrupted"); fasl_byte_count += 8; convert_fp_rep((char *)r + 8 - TAG_BOXFLOAT, fp_rep, current_fp_rep, 2); return r; #ifdef COMMON case F_FPL: r = getvector(TAG_BOXFLOAT, TYPE_LONG_FLOAT, sizeof(Long_Float)); errexit(); if (Iread((char *)r + 8 - TAG_BOXFLOAT, 8) != 8) return aerror("FASL file corrupted"); fasl_byte_count += 8; /* Beware offset of 8 here if long floats -> 3 words */ convert_fp_rep((char *)r + 8 - TAG_BOXFLOAT, fp_rep, current_fp_rep, 3); return r; #endif case F_ID1: case F_ID2: case F_ID3: case F_ID4: case F_ID5: case F_ID6: case F_ID7: case F_ID8: case F_ID9: case F_IDA: case F_IDB: case F_IDC: case F_IDD: case F_IDE: case F_IDF: operand = ch - F_ID1 + 1; if (Iread(&boffo_char(0), operand) != operand) return aerror("FASL file corrupted"); fasl_byte_count += operand; if (skipping_input == 2) r = nil; else r = iintern(boffo, operand, CP, 0); errexit(); /* * The KEEP_RECENT most recently used symbols are stored in a cyclic buffer * so that if re-used they will be rapidly available. */ if (skipping_input == 0) { recent_pointer++; if (recent_pointer == KEEP_RECENT) recent_pointer = 0; w = elt(faslvec, recent_pointer); #ifdef COMMON if (qpackage(w) == nil) #else if (qheader(w) & SYM_ANY_GENSYM) #endif { push(r); #ifdef DEBUG_FASL trace_printf("recording gensym "); prin_to_trace(w); trace_printf("\n"); #endif w = cons(w, faslgensyms); pop(r); errexit(); faslgensyms = w; } elt(faslvec, recent_pointer) = r; #ifdef DEBUG_FASL trace_printf("recording "); prin_to_trace(r); trace_printf("\n"); #endif } return r; case F_EXT: /* extend effective range of operand */ { int ch1 = Igetc(); fasl_byte_count++; if (ch1 == EOF) return aerror("premature EOF in FASL file"); operand = (operand << 8) + ((int32)ch1 & 0xff); } ch = (int32)Igetc(); fasl_byte_count++; if (ch == EOF) return aerror("premature EOF in FASL file"); ch &= 0xff; continue; /* dispatch again on next byte */ default: return fastread1(ch, operand); } } } static char *trim_module_name(char *name, int32 *lenp) { int len = *lenp, len1; len1 = len - 1; /* * Firstly I will decrease the length of the string if there is a "." * towards the end. */ while (len1 > 0 && name[len1] != '.') { if (name[len1] == '/' || name[len1] == '\\') { len1 = len; break; } len1--; } if (len1 > 0) len = len1; /* * Now I will try to remove any prefix that ends in "/" or "\". * Through all this I will attempt to leave SOMETHING over from "silly" * inputs such as ".....", but exactly what happens in such cases does not * bother me much! */ len1 = len - 1; while (len1 > 0 && name[len1] != '/' && name[len1] != '\\' && name[len1] != '.') len1--; if (len1 > 0 && len1 < len-2) { len1++; name += len1; len -= len1; } *lenp = len; return name; } Lisp_Object Lcopy_module(Lisp_Object nil, Lisp_Object file) /* * copy-module will ensure that the output PDS contains a copy of * the module that is named. As a special case (copy-module nil) will * copy the help data "module". There is no provision for copying * startup banner data - that must be set up by hand. */ { #ifdef DEMO_MODE return onevalue(nil); #else Header h; int32 len; char *modname; #ifdef SOCKETS /* * Security measure - remote client can not do "copy-module" */ if (socket_server != 0) return onevalue(nil); #endif if (file == nil) Icopy(NULL, 0); else { if (symbolp(file)) { file = get_pname(file); errexit(); h = vechdr(file); } else if (!is_vector(file) || type_of_header(h = vechdr(file)) != TYPE_STRING) return aerror("copy-module"); len = length_of_header(h) - CELL; modname = (char *)file + CELL - TAG_VECTOR; modname = trim_module_name(modname, &len); Icopy(modname, (int)len); } return onevalue(nil); #endif } Lisp_Object Ldelete_module(Lisp_Object nil, Lisp_Object file) /* * delete-module deletes the named module from the output PDS, supposing it * was there to begin with. (delete-module nil) deletes any help data. */ { #ifdef DEMO_MODE return onevalue(nil); #else Header h; int32 len; char *modname; #ifdef SOCKETS /* * Security measure - remote client can not do "delete-module" */ if (socket_server != 0) return onevalue(nil); #endif if (file == nil) Idelete(NULL, 0); else { if (symbolp(file)) { file = get_pname(file); errexit(); h = vechdr(file); } else if (!is_vector(file) || type_of_header(h = vechdr(file)) != TYPE_STRING) return aerror("delete-module"); len = length_of_header(h) - CELL; modname = (char *)file + CELL - TAG_VECTOR; modname = trim_module_name(modname, &len); Idelete(modname, (int)len); } return onevalue(nil); #endif /* DEMO_MODE */ } Lisp_Object Lbanner(Lisp_Object nil, Lisp_Object info) /* * (banner nil) returns the current banner info (nil if none) * (banner "string") sets new info * (banner "") deletes any that there is. */ { Header h; int i; int32 len; char *name; Ihandle save; if (info == nil) { char b[64]; Icontext(&save); if (Iopen_banner(0)) { Irestore_context(save); return onevalue(nil); } for (i=0; i<64; i++) b[i] = (char)Igetc(); IcloseInput(NO); Irestore_context(save); info = make_string(b); errexit(); return onevalue(info); } #ifdef DEMO_MODE return onevalue(nil); #else #ifdef SOCKETS /* * Security measure - remote client can not change banner info */ if (socket_server != 0) return onevalue(nil); #endif if (symbolp(info)) { info = get_pname(info); errexit(); h = vechdr(info); } else if (!is_vector(info) || type_of_header(h = vechdr(info)) != TYPE_STRING) return aerror("banner"); len = length_of_header(h) - CELL; name = (char *)info + CELL - TAG_VECTOR; if (len == 0) Iopen_banner(-2); /* delete banner info */ else { Icontext(&save); if (Iopen_banner(-1)) { Irestore_context(save); return onevalue(nil); } if (len > 63) len = 63; for (i=0; i<64; i++) Iputc(i >= len ? 0 : name[i]); IcloseOutput(); Irestore_context(save); } return onevalue(lisp_true); #endif /* DEMO_MODE */ } Lisp_Object MS_CDECL Llist_modules(Lisp_Object nil, int nargs, ...) /* * display information about available modules */ { argcheck(nargs, 0, "list-modules"); Ilist(); return onevalue(nil); } Lisp_Object Lwritable_libraryp(Lisp_Object nil, Lisp_Object file) /* * This tests if a library handle refers to a writable file. */ { #ifdef DEMO_MODE return onevalue(nil); #else int i; directory *d; if ((file & 0xffff) != SPID_LIBRARY) return onevalue(nil); i = (file >> 20) & 0xfff; d = fasl_files[i]; i = d->h.updated; return onevalue(Lispify_predicate(i & D_WRITE_OK)); #endif } static Lisp_Object load_module(Lisp_Object nil, Lisp_Object file, int sourceonly) /* * load_module() rebinds *package* in COMMON mode, but also note that * it DOES rebind a whole load of variables so that loading one module * can be done while in the process of loading another. * also rebinds *echo to nil in case we are reading from a stream. */ { char filename[LONGEST_LEGAL_FILENAME]; Header h; int32 len; Ihandle save; Lisp_Object v; CSLbool from_stream = NO; int close_mode; char *modname; int32 save_recent = recent_pointer, save_byte_count = fasl_byte_count; #ifdef NAG char *ptr; int32 old_symbol_protect_flag; #endif if (is_stream(file)) h=0, from_stream = YES; else if (symbolp(file)) { file = get_pname(file); errexit(); h = vechdr(file); } else if (!is_vector(file) || type_of_header(h = vechdr(file)) != TYPE_STRING) return aerror("load-module"); current_module = file; if (from_stream) { Icontext(&save); if (Iopen_from_stdin()) { err_printf("Failed to load module from stream\n"); Irestore_context(save); return error(1, err_no_fasl, file); } push(qvalue(standard_input)); qvalue(standard_input) = file; push(qvalue(echo_symbol)); qvalue(echo_symbol) = nil; } else { len = length_of_header(h) - CELL; modname = (char *)file + CELL - TAG_VECTOR; modname = trim_module_name(modname, &len); Icontext(&save); if (Iopen(modname, (int)len, YES, filename)) { err_printf("Failed to find \"%s\"\n", filename); Irestore_context(save); return error(1, err_no_fasl, file); } } v = getvector_init(CELL*(KEEP_RECENT+1), nil); nil = C_nil; if (exception_pending()) { IcloseInput(NO); Irestore_context(save); if (from_stream) { flip_exception(); pop(qvalue(echo_symbol)); pop(qvalue(standard_input)); flip_exception(); } return nil; } push(qvalue(work_symbol)); qvalue(work_symbol) = nil; /* list of functions loaded in source form */ /* * I will account time spent fast-loading things as "storage management" * overhead to be counted as "garbage collector time" rather than * regular "cpu time" */ push_clock(); if (verbos_flag & 2) { freshline_trace(); if (sourceonly) { if (from_stream) trace_printf("Loading source from a stream\n"); else trace_printf("Loading source for \"%s\"\n", filename); } else { if (from_stream) trace_printf("Fast-loading from a stream\n"); else trace_printf("Fast-loading \"%s\"\n", filename); } } #ifdef NAG /* * This next bit is designed to ensure that, under the default configuration, * the user can overwrite bits of the system that are re-defined in the kernel, * but loading the Lisp versions from a "standard" image file will have no * effect. This is totally AXIOM dependent! */ old_symbol_protect_flag = symbol_protect_flag; ptr = strrchr(filename, '/'); /* /* BEWARE for Axiom purposes!!!!!!!! */ if (ptr && strlen(ptr) > 5 && strncmp(ptr+1,"axiom",5) == 0) symbol_protect_flag = 1; #endif push(CP); push(faslvec); faslvec = v; push(faslgensyms); faslgensyms = nil; push(qvalue(savedef)); if (sourceonly) qvalue(savedef) = savedef; just_reading_source = sourceonly; recent_pointer = 0; fasl_byte_count = 0; skipping_input = 0; for (;;) { Lisp_Object r = fastread(); nil = C_nil; if (exception_pending() || r == CHAR_EOF) break; #ifdef DEBUG_FASL trace_printf("FASL: "); loop_print_trace(r); trace_printf("\n"); #endif if (!sourceonly) voideval(r, nil); nil = C_nil; if (exception_pending()) break; } close_mode = YES; if (exception_pending()) flip_exception(), close_mode = NO; pop(qvalue(savedef)); pop(faslgensyms); pop(faslvec); pop(CP); if (sourceonly) file = qvalue(work_symbol); else file = nil; pop(qvalue(work_symbol)); /* If something already smashed there is no joy in checking the checksum */ push(file); IcloseInput(close_mode); Irestore_context(save); #ifdef NAG symbol_protect_flag = old_symbol_protect_flag; #endif pop(file); if (from_stream) { pop(qvalue(echo_symbol)); pop(qvalue(standard_input)); } recent_pointer = save_recent; fasl_byte_count = save_byte_count; gc_time += pop_clock(); if (!close_mode) { flip_exception(); return nil; } return onevalue(file); } Lisp_Object Lload_source(Lisp_Object nil, Lisp_Object file) { return load_module(nil, file, 1); } Lisp_Object Lload_module(Lisp_Object nil, Lisp_Object file) { return load_module(nil, file, 0); } #ifdef DEBUG_FASL static void IputcDebug(int c, int line) { Iputc(c); trace_printf("Iputc(%d/%x/%s: %d %.8x %.8x)\n", c, c, fasl_code(c), line, C_stack, C_nil); } #define Iputc(c) IputcDebug(c, __LINE__) #endif #ifndef DEMO_MODE static void out_fasl_prefix(int32 n) /* * Used to generate any prefixes to cope with large operands in * FASL streams */ { if (n != 0) { out_fasl_prefix(n >> 8); Iputc(F_EXT); Iputc((int)(n & 0xff)); } } #endif Lisp_Object Lmodule_exists(Lisp_Object nil, Lisp_Object file) { char filename[LONGEST_LEGAL_FILENAME], tt[32]; Header h; int32 len; int32 size; char *modname; if (symbolp(file)) { file = get_pname(file); errexit(); h = vechdr(file); } else if (!is_vector(file) || type_of_header(h = vechdr(file)) != TYPE_STRING) return aerror("modulep"); len = length_of_header(h) - CELL; modname = (char *)file + CELL - TAG_VECTOR; modname = trim_module_name(modname, &len); if (Imodulep(modname, (int)len, tt, &size, filename)) return onevalue(nil); tt[24] = 0; file = make_string(tt); errexit(); return onevalue(file); } Lisp_Object Lstart_module(Lisp_Object nil, Lisp_Object name) /* * This must be called before write-module - it resets the table of recently- * mentioned identifiers to be empty. Calling with a nil argument * closes the current fasl file, otherwise the arg is the name of * a file to open. It is not intended that ordinary programmers call * this function - it is for use from within the compiler. * As a special bit of magic the name passed can be a Lisp stream, in * which case the module data will be written to it. */ { #ifdef DEMO_MODE return onevalue(nil); #else Lisp_Object w; #ifdef SOCKETS /* * Security measure - remote client can not do "FASLOUT" & start-module */ if (socket_server != 0) return onevalue(nil); #endif recent_pointer = 0; skipping_output = 0; fp_rep_set = NO; if (name == nil) { if (fasl_output_file) { int k = (int)Ioutsize() & 0x3; /* * Here I arrange that all FASL modules will end up being a multiple of * 4 bytes long. "WHY?" Well I once suffered from a machine that was not * very good at supporting odd-length data transfers (the suggestion I * collected is that it MAY be because I had an early version of an 80386 CPU * chip installed). The padding up here is not very painful and may avoid * some painful trouble on my machine (and hence maybe on some other ones). * The machine concerned is a PC and the chip and 80386, just in case you * wondered. Zortech technical support were very helpful trying to * track down the crashes I was having - even had they provided a software * work-around in their code at some time I should leave this code and comment * in CSL. * Note (June 1992) I now have a computer with a newer CPU chip in it and * the problem mentioned above does not arise - but it still seems reasonable * to keep modules a multiple of 4 bytes long. * Note (October 1995) Well, now I have a Pentium rather than a 386, and * my previous 80486 system has gone down the feeding chain to replace the * old and dodgy 80386. So sometime within the next year or so I will * remove this comment, but still leave modules padded to multiples of * 4 bytes since maybe I would introduce more bugs removing that than I would * save. * (January 1999) This little essay continues to entertain me. The 386 system * happens to be around Cambridge again as a "relic" having been discarded as * too old-fashioned and slow by pretty well everybody! Gosh how machines * change during the life-time of a piece of software! * (march 2001) "early 386" bug hah. Gosh that was slow by today's standards. */ while (k != 3) k++, Iputc(F_NIL); Iputc(F_END); IcloseOutput(); faslvec = nil; faslgensyms = nil; fasl_output_file = NO; fasl_stream = nil; if (verbos_flag & 2) { freshline_trace(); #ifdef COMMON trace_printf(";; FASLEND: hits = %ld, misses = %ld\n", (long)hits, (long)misses); #else trace_printf("+++ FASLEND: hits = %ld, misses = %ld\n", (long)hits, (long)misses); #endif } return onevalue(lisp_true); } else return onevalue(nil); } else if (is_stream(name)) { push(name); w = getvector_init(CELL*(KEEP_RECENT+1), nil); pop(name); errexit(); faslvec = w; hits = misses = 0; faslgensyms = nil; fasl_stream = name; fasl_output_file = YES; Iopen_to_stdout(); /* initialises checksum calculation */ return onevalue(lisp_true); } else { char filename[LONGEST_LEGAL_FILENAME]; char *modname; int32 len; Header h; push(name); w = getvector_init(CELL*(KEEP_RECENT+1), nil); pop(name); errexit(); faslvec = w; hits = misses = 0; faslgensyms = nil; #ifdef COMMON if (complex_stringp(name)) { name = simplify_string(name); errexit(); h = vechdr(name); } else #endif if (symbolp(name)) { name = get_pname(name); errexit(); h = vechdr(name); } else if (!(is_vector(name))) return aerror("start-module"); else if (type_of_header(h = vechdr(name)) != TYPE_STRING) return aerror("start-module"); len = length_of_header(h) - CELL; modname = (char *)name + CELL - TAG_VECTOR; /* * Here I will play jolly games! The name as passed in to start-module will * be allowed to be a fairly general file-name. If there is a suffix of the * form ".xxx" on the end I will strip that off. If there is a directory- * style component before that (as signalled by having a "/" or a "\" or * another "." within the name) I will trim that off too. So the input * string "/home/xxx/something.fsl" (say) would be treated exactly as if * it had been just "something". */ modname = trim_module_name(modname, &len); if (len >= sizeof(filename)) len = sizeof(filename); if (Iopen(modname, (int)len, NO, filename)) { err_printf("Failed to open \"%s\"\n", filename); return onevalue(nil); } fasl_output_file = YES; return onevalue(lisp_true); } #endif /* DEMO_MODE */ } Lisp_Object Ldefine_in_module(Lisp_Object nil, Lisp_Object a) { #ifdef DEMO_MODE return onevalue(nil); #else int32 args, opts, ntail; #ifdef SOCKETS /* * Security measure - remote client can not do "define-in-module" */ if (socket_server != 0) return onevalue(nil); #endif if (!is_fixnum(a)) return aerror("define-in-module"); if (a == fixnum_of_int(-1)) { Iputc(F_SDEF); /* * An expression preceeded with F_SDEF will be loaded again only if * the variable "*savedef" is true at the time of loading, or if * the load-source function is called and the function whose definition * is involved has a load-source property. */ skipping_output = 1; return onevalue(nil); } skipping_output = 0; args = int_of_fixnum(a); opts = args >> 8; ntail = opts >> 10; if (ntail != 0) return aerror("tailcall magic not supported in FASL files yet"); opts &= 0x3ff; if (opts == 0) switch (args & 0xff) { case 0: Iputc(F_DEF0); break; case 1: Iputc(F_DEF1); break; case 2: Iputc(F_DEF2); break; case 3: Iputc(F_DEF3); break; default:Iputc(F_DEFN); break; } else switch (opts >> 8) { default: case 0: Iputc(F_DEFOPT); break; case 1: Iputc(F_DEFHOPT); break; case 2: Iputc(F_DEFREST); break; case 3: Iputc(F_DEFHREST); break; } return onevalue(nil); #endif /* DEMO_MODE */ } #ifdef DEBUG_FASL static void IwriteDebug(char *x, int n, int line) { int i; Iwrite(x, n); trace_printf("Iwrite %d %.8x %.8x", line, C_nil, C_stack); for (i=0; i<n ;i++) { trace_printf(" %d/%x", x[i], x[i]); if (32 <= x[i] && x[i] < 0x7f) trace_printf("/'%c'", x[i]); } trace_printf("\n"); } #define Iwrite(x, n) IwriteDebug(x, n, __LINE__) #endif #ifndef DEMO_MODE static Lisp_Object write_module0(Lisp_Object nil, Lisp_Object a); static Lisp_Object write_module1(Lisp_Object a) { Lisp_Object nil = C_nil; if (is_bfloat(a)) { Header h = flthdr(a); if (!fp_rep_set) { fp_rep_set = YES; Iputc(F_REP); Iputc(current_fp_rep & 0xff); Iputc((current_fp_rep >> 8) & 0xff); } switch (type_of_header(h)) { default: return aerror("unrecognized FP number type"); #ifdef COMMON case TYPE_SINGLE_FLOAT: Iputc(F_FPF); Iwrite((char *)a + CELL - TAG_BOXFLOAT, 4); break; #endif case TYPE_DOUBLE_FLOAT: Iputc(F_FPD); /* nb offset here is 8 in both 32 and 64 bit modes */ Iwrite((char *)a + 8L - TAG_BOXFLOAT, 8); break; #ifdef COMMON case TYPE_LONG_FLOAT: Iputc(F_FPL); Iwrite((char *)a + 8 - TAG_BOXFLOAT, 8); break; #endif } } else if (is_char(a)) { Iputc(F_CHAR); /* * Note that for somewhat dubious reasons I have separated out the * end of file character earlier on and treated it oddly. */ Iputc((int)bits_of_char(a)); Iputc((int)font_of_char(a)); Iputc((int)code_of_char(a)); } else if (is_bps(a)) { char *d = data_of_bps(a); int32 len = length_of_header(*(Header *)(d - CELL)) - CELL; switch (len >> 8) { case 3: Iputc(F_BP3); break; case 2: Iputc(F_BP2); break; case 1: Iputc(F_BP1); break; default: out_fasl_prefix(len >> 8); Iputc(F_BP0); break; } Iputc((int)(len & 0xff)); Iwrite(d, len); } else if (is_vector(a)) { Header h = vechdr(a); int32 len = length_of_header(h) - CELL, i; switch (type_of_header(h)) { case TYPE_STRING: out_fasl_prefix(len >> 8); Iputc(F_STR); Iputc((int)(len & 0xff)); Iwrite((char *)a + CELL - TAG_VECTOR, len); break; case TYPE_HASH: /* Writing these may be easy... */ case TYPE_SIMPLE_VEC: case TYPE_STRUCTURE: len /= CELL; out_fasl_prefix(len >> 8); Iputc(type_of_header(h) == TYPE_HASH ? F_HASH : type_of_header(h) == TYPE_STRUCTURE ? F_STRUCT : F_VEC); Iputc((int)(len & 0xff)); for (i=0; i<len; i++) { push(a); write_module0(nil, elt(a, i)); pop(a); errexit(); } break; default: /* * The explicit enumeration of left-over cases is here ready for when * (or if!) I ever decide to extend the FASL format to support these * extra types. Until I do please note that Common Lisp arrays and * bit-vectors can not be coped with here. */ #ifdef COMMON case TYPE_ARRAY: case TYPE_BITVEC1: case TYPE_BITVEC2: case TYPE_BITVEC3: case TYPE_BITVEC4: case TYPE_BITVEC5: case TYPE_BITVEC6: case TYPE_BITVEC7: case TYPE_BITVEC8: #endif case TYPE_MIXED1: case TYPE_MIXED2: return aerror("vector type unsupported by write-module"); } } else return aerror("write-module"); return nil; } #endif /* DEMO_MODE */ Lisp_Object Lwrite_module(Lisp_Object nil, Lisp_Object a) { #ifdef DEBUG_FASL push(a); trace_printf("FASLOUT: "); loop_print_trace(a); errexit(); trace_printf("\n"); pop(a); #endif return write_module0(nil, a); } static Lisp_Object write_module0(Lisp_Object nil, Lisp_Object a) /* * write one expression to the currently selected output stream. * That stream ought to have been opened using start-module, and is * binary (i.e. no record separators or concern about record length * must intrude). */ { #ifdef DEMO_MODE return onevalue(nil); #else #ifdef SOCKETS /* * Security measure - remote client can not do "write-module" */ if (socket_server != 0) return onevalue(nil); #endif if (a == nil) Iputc(F_NIL); else if (a == lisp_true) Iputc(F_TRU); else if (a == CHAR_EOF) Iputc(F_END); /* * In Common Lisp mode there will be a certain amount of horrible fun with * symbols and the package system. But a symbol that is EQ to one recently * processed can be handled that way regardless. */ else if (is_symbol(a)) { int32 i, len; Lisp_Object w, w1; int pkgid = 0; int32 k; #ifdef COMMON int32 lenp; #endif for (i=0; i<KEEP_RECENT; i++) { int32 w = recent_pointer - i; if (w < 0) w += KEEP_RECENT; if (a == elt(faslvec, w)) { Iputc((int)(F_OLD+i)); hits++; return onevalue(nil); } } push(a); w = get_pname(a); pop(a); errexit(); /* * The FASL mechanism does not in general preserve EQness. In particular * cyclic structures will upset it, and multiple references to the same * string or float (etc) will read back as distinct entities. However * within one S-expression I will arrange that uninterned symbols are * handled tolerably cleanly... The first time such a symbol is written * its name is dumped in the file. When this is read back a new uninterned * symbol with that name is created. Usually the next few uses will use * the "recently referenced symbol" mechanism, and so will refer back to * this value. For gensyms I extend the usual cyclic buffer that holds the * recently mentioned symbols with a fall-back list of mentioned gensyms, * and refer into that using F_EXT followed by a "recent" reference. This * mechanism gets activated especially if the FASL file contains a * macro-expanded but not compiled form where the expansion introduces * gensyms as labels etc. */ #ifdef COMMON /* * The code here is expected to match that in print.c. It sets pkgid to * indicate how the symbol involved needs to be put into the FASL file. * My byte format there is optimised for the case where no package marker * is needed. The values of pkgid are: * 0 no package marker needed * 1 display as #:xxx (ie as a gensym) * 2 display as :xxx (ie in keyword package) * 3 display as ppp:xxx (external in its home package) * 4 display as ppp::xxx (internal in its home package) */ if (qpackage(a) == nil) { for (w1 = faslgensyms, k=0; w1!=nil; w1=qcdr(w1), k++) { if (qcar(w1) == a) { out_fasl_prefix(1 + (k>>7)); Iputc((int)(F_OLD+(k & 0x7f))); #ifdef DEBUG_FASL trace_printf("++ Ancient FASL gensym ref %d\n", k); #endif hits++; return onevalue(nil); } } pkgid = 1; /* gensym */ } else if (qpackage(a) == qvalue(keyword_package)) pkgid = 2; else if (qpackage(a) == CP) pkgid = 0; /* home is current */ else { pkgid = 3; k = packflags_(CP); if (k != 0 && k <= 10) { k = ((int32)1) << (k+SYM_IN_PKG_SHIFT-1); if (k & qheader(a)) pkgid = 0; } else k = 0; if (pkgid != 0) { push2(a, w); w1 = Lfind_symbol_1(nil, w); pop2(w, a); errexit(); if (mv_2 != nil && w1 == a) { pkgid = 0; qheader(a) |= k; } else if (qheader(a) & SYM_EXTERN_IN_HOME) pkgid = 3; else pkgid = 4; } } misses++; if (skipping_output == 0 || pkgid == 1) { recent_pointer++; if (recent_pointer == KEEP_RECENT) recent_pointer = 0; w1 = elt(faslvec, recent_pointer); if (qpackage(w1) == nil) { push(a); #ifdef DEBUG_FASL trace_printf("recording gensym "); prin_to_trace(w1); trace_printf("\n"); #endif w1 = cons(w1, faslgensyms); pop(a); errexit(); faslgensyms = w1; } elt(faslvec, recent_pointer) = a; #ifdef DEBUG_FASL trace_printf("recording "); prin_to_trace(a); trace_printf("\n"); #endif } len = length_of_header(vechdr(w)) - CELL; switch (pkgid) { case 0: if (1 <= len && len <= 15) Iputc(F_ID1 + (int)len - 1); else { out_fasl_prefix(len >> 8); Iputc(F_SYM); Iputc((int)(len & 0xff)); } lenp = -1; break; case 1: out_fasl_prefix(len >> 8); Iputc(F_PKGINT); Iputc(0); lenp = 0; break; case 2: out_fasl_prefix(len >> 8); Iputc(F_PKGEXT); Iputc(0); lenp = 0; break; case 3: out_fasl_prefix(len >> 8); Iputc(F_PKGEXT); lenp = 1; break; case 4: out_fasl_prefix(len >> 8); Iputc(F_PKGINT); lenp = 1; break; } if (lenp > 0) { push(w); a = packname_(qpackage(a)); pop(w); errexit(); lenp = length_of_header(vechdr(a)) - CELL; /* * Another ugliness rears its head here... I allow for symbols that have * very long names, but I will only support packages where the name of the * package is less then 256 characters. This is so I can use a one-byte * counter to indicate its length. If I REALLY have to I can put in * support for ultra-long names for packages, but the mess involved * seems offensive at the moment. I truncate any over-long package name * at 255 here. Silently. */ if (lenp > 255) lenp = 255; Iputc(lenp); Iputc((int)(len & 255)); Iwrite((char *)a + CELL - TAG_VECTOR, lenp); } else if (lenp == 0) Iputc((int)(len & 0xff)); Iwrite((char *)w + CELL - TAG_VECTOR, len); #else /* * In Standard Lisp mode things that were gensyms in the original * will probably get read back in as ordinary symbols. This at least * ensures that multiple references to the same gensym end up matching, and * it is less effort than the Common Lisp solution... * Actually I am now finding this to be UNSATISFACTORY and am going to * change it to be much more like the behaviour I have in the COMMON case. */ if ((qheader(a) & SYM_ANY_GENSYM) != 0) { for (w1 = faslgensyms, k=0; w1!=nil; w1=qcdr(w1), k++) { if (qcar(w1) == a) { out_fasl_prefix(1 + (k>>7)); Iputc((int)(F_OLD+(k & 0x7f))); #ifdef DEBUG_FASL trace_printf("++ Ancient FASL gensym ref %d\n", k); #endif hits++; return onevalue(nil); } } pkgid = 1; /* gensym */ } misses++; /* * See comment where F_GENSYM is read to understand why gensyms must be * recorded even when skipping... */ if (skipping_output == 0 || pkgid == 1) { recent_pointer++; if (recent_pointer == KEEP_RECENT) recent_pointer = 0; w1 = elt(faslvec, recent_pointer); if ((qheader(w1) & SYM_ANY_GENSYM) != 0) { push(a); #ifdef DEBUG_FASL trace_printf("recording gensym "); prin_to_trace(w1); trace_printf("\n"); #endif w1 = cons(w1, faslgensyms); pop(a); errexit(); faslgensyms = w1; } elt(faslvec, recent_pointer) = a; #ifdef DEBUG_FASL trace_printf("recording "); prin_to_trace(a); trace_printf("\n"); #endif } len = length_of_header(vechdr(w)) - CELL; if (pkgid == 0) { if (1 <= len && len <= 15) Iputc(F_ID1 + (int)len - 1); else { out_fasl_prefix(len >> 8); Iputc(F_SYM); Iputc((int)(len & 0xff)); } } else { out_fasl_prefix(len >> 8); /* here it is a gensym */ Iputc(F_GENSYM); Iputc((int)(len & 0xff)); } Iwrite((char *)w + CELL - TAG_VECTOR, len); #endif } else if (is_cons(a)) { int32 len, i; Lisp_Object cara = qcar(a), cdra = qcdr(a); if (cara == quote_symbol && consp(cdra) && qcdr(cdra) == nil) { Iputc(F_QUT); return write_module0(nil, qcar(cdra)); } len = 1; while (consp(cdra)) len++, cdra = qcdr(cdra); out_fasl_prefix(len >> 8); if (cdra == nil) { switch (len) { case 1: Iputc(F_LS1); break; case 2: Iputc(F_LS2); break; case 3: Iputc(F_LS3); break; case 4: Iputc(F_LS4); break; default: Iputc(F_LST); Iputc((int)(len & 0xff)); break; } } else { Iputc(F_DOT); Iputc((int)(len & 0xff)); push(a); stackcheck1(1, cdra); write_module0(nil, cdra); pop(a); errexit(); } cdra = nil; for (i=0; i<len; i++) { push(a); cdra = cons(qcar(a), cdra); pop(a); errexit(); a = qcdr(a); } for (i=0; i<len; i++) { push(cdra); write_module0(nil, qcar(cdra)); pop(cdra); errexit(); cdra = qcdr(cdra); } } else if (is_fixnum(a)) { int32 n = int_of_fixnum(a); CSLbool sign; /* * The fixnum range is 0xf8000000 to 0x07ffffff */ if (n < 0) n = -n, sign = YES; else sign = NO; out_fasl_prefix(n >> 8); Iputc(sign ? F_NEG : F_INT); Iputc((int)(n & 0xff)); } else if (is_numbers(a)) { Header h = numhdr(a); int32 len, i; switch (type_of_header(h)) { default: return aerror("unrecognized number type"); #ifdef COMMON case TYPE_RATNUM: Iputc(F_RAT); break; case TYPE_COMPLEX_NUM: Iputc(F_CPX); break; #endif case TYPE_BIGNUM: len = length_of_header(h) - CELL; out_fasl_prefix(len >> 8); Iputc(F_BIG); Iputc((int)(len & 0xff)); /* * I write out the value byte by byte so that the binary in the file * does not depend on the byte-ordering used by the host computer. */ for (i=0; i<len; i+=4) /* always in 32-bit units */ { unsigned32 v = *(unsigned32 *)((char *)a + CELL - TAG_NUMBERS + i); Iputc((int)(v >> 24) & 0xff); Iputc((int)(v >> 16) & 0xff); Iputc((int)(v >> 8) & 0xff); Iputc((int)v & 0xff); } return onevalue(nil); } #ifdef COMMON write_module0(nil, *(Lisp_Object *)((char *)a + CELL - TAG_NUMBERS)); errexit(); return write_module0(nil, *(Lisp_Object *)((char *)a + 2*CELL - TAG_NUMBERS)); #endif } #ifdef COMMON else if (is_sfloat(a)) { Lisp_Object w = a; /* * I write out floating point values in whatever the natural host * representation is - but prefix the first FP value with a marker that * identifies what that representation is so that when the file is re-loaded * a conversion can be applied as necessary. */ if (!fp_rep_set) { fp_rep_set = YES; Iputc(F_REP); Iputc(current_fp_rep & 0xff); Iputc((current_fp_rep >> 8) & 0xff); } Iputc(F_FPS); Iwrite((char *)&w, 4); } #endif else write_module1(a); return onevalue(nil); #endif /* DEMO_MODE */ } /* * (set-help-file "key" "path") puts an extra help file on the cwin * HELP menu. If "path" is NIL then the item specified by "key" is * removed. If "key" is NIL then all user-inserted items are removed. */ Lisp_Object Lset_help_file(Lisp_Object nil, Lisp_Object a, Lisp_Object b) { #ifdef CWIN char *w, *aa, *bb = NULL; int32 lena, lenb; if (a != nil) { w = get_string_data(a, "set-help-file", &lena); errexit(); aa = (char *)malloc(lena+1); if (aa == NULL) return aerror("set-help-file"); memcpy(aa, w, lena); aa[lena] = 0; } else { aa = NULL; b = nil; } if (b != nil) { w = get_string_data(b, "set-help-file", &lenb); errexit(); bb = (char *)malloc(lenb+1); if (bb == NULL) return aerror("set-help-file"); memcpy(bb, w, lenb); bb[lenb] = 0; } cwin_set_help_file(aa, bb); #endif return onevalue(nil); } #ifdef NO_HELP_SYSTEM #undef HELP_SYSTEM #else #ifndef HELP_SYSTEM # define HELP_SYSTEM 1 /* Always enabled, now */ #endif #endif #ifdef HELP_SYSTEM /* * write-help-module (now) takes as argument a file-name. It expects the * file to be in INFO format. It copies the text from the file into * a section of the image file and builds an index (which will remain in * memory). */ /* * write-help-module has two arguments here because the previous version did * and changing that would cause short-term confusion... */ #ifndef DEMO_MODE static void merge_sort(char *a, char *b, int left, int right) { int next = left+8, mid, i, j; if (left==right) return; /* Empty vector to sort */ while (next < right && a[next] != 0) next += 8; if (next >= right) return; /* Only one item there */ mid = ((left+right)/2) & ~7; if (mid <= next) mid = next; else while (a[mid] != 0) mid -= 8; /* * Now (left..mid) is non-empty because mid >= next, and (mid..right) is not * empty because mid rounded downwards and the vector has at least two * items in it. */ merge_sort(a, b, left, mid); merge_sort(a, b, mid, right); for (i=left; i<=right; i++) b[i] = a[i]; i = left; j = mid; next = left; /* Now merge back from b to a */ while (i < mid && j < right) { int i1 = i+4, j1=j+4, k; for (k=0; k<28; k++) { if (b[i1] != b[j1]) break; i1++; j1++; } if (b[i1] <= b[j1]) { do { *(int32 *)(&a[next]) = *(int32 *)(&b[i]); *(int32 *)(&a[next+4]) = *(int32 *)(&b[i+4]); next += 8; i += 8; } while (b[i] != 0); } else { do { *(int32 *)(&a[next]) = *(int32 *)(&b[j]); *(int32 *)(&a[next+4]) = *(int32 *)(&b[j+4]); next += 8; j += 8; } while (b[j] != 0); } } while (i < mid) a[next++] = b[i++]; while (j < right) a[next++] = b[j++]; } /* * To get some sort of compression on the help text I will collect * statistics about which pairs of characters occur adjacent to one * another. I will first use an array of 256*256 unsigned characters. When * a particular pair records 255 in this count field I will enter it in * an overflow hash table. The space for each of these tables will be * grabbed using malloc(), so if you try to build a help database on * a machine where grabbing an extra 100K of memory is awkward then you * may be out of luck. */ typedef struct char_pair_hash { int32 count; char c1, c2; } char_pair_hash; /* * I observe (having done the experiment) that the REDUCE help database * causes overflow for somewhat under 400 character-pairs. Thus a hash * table with room for twice that number should suffice for now. Note that * an utterly worst-case file would have to be over 256Kbytes long for * more than 1000 character pairs each to occur over 256 times, and all * realistic text files will be a very long way from that case. If, by * mistake, one fed this code a file that was already compressed it would * collapse with an overfull hash table. Tough luck - in such cases I will * just deliver slightly silly results. */ #define OVERFLOW_SIZE 1000 #define PASS_COUNT 12 static int MS_CDECL compare_char_counts(void const *aa, void const *bb) { return ((char_pair_hash *)bb)->count - ((char_pair_hash *)aa)->count; } #define INFO_CHAR ('_' & 0x1f) #endif /* DEMO_MODE */ Lisp_Object Lwrite_help_module(Lisp_Object nil, Lisp_Object name, Lisp_Object ignore) { #ifdef DEMO_MODE return onevalue(nil); #else int i, c1, c2, c3, pass, linep; int32 info_seen; unsigned char cx1[256], cx2[256]; char buff[16], line[256]; /* * There can be no more than 256 items put in the coded[] hash table, and * in general I expect it to be considerably less than that. So having the * table of size 409 (a prime) guarantees it will never get too full so * performance ought to be pretty good. */ #define CODED_SIZE 409 char_pair_hash coded[CODED_SIZE]; int32 buffp; Ihandle save; Lisp_Object v = nil, v1; int32 indexlength = -10000, saving; int32 helpsize = 0, len; char filename[LONGEST_LEGAL_FILENAME]; Header h; FILE *file; unsigned char *frequencies; char_pair_hash *overflow; CSL_IGNORE(ignore); #ifdef SOCKETS /* * Security measure - remote client can not do write-help-module" */ if (socket_server != 0) return onevalue(nil); #endif #ifdef COMMON if (complex_stringp(name)) { name = simplify_string(name); errexit(); h = vechdr(name); } else #endif if (symbolp(name)) { name = get_pname(name); errexit(); h = vechdr(name); } else if (!(is_vector(name))) return aerror("write-help-module"); else if (type_of_header(h = vechdr(name)) != TYPE_STRING) return aerror("write-help-module"); len = length_of_header(h) - CELL; if (len > sizeof(filename)) len = sizeof(filename); file = open_file(filename, (char *)name + (CELL-TAG_VECTOR), (size_t)len, "r", NULL); if (file == NULL) return aerror("write-help-module"); Icontext(&save); if (Iopen_help(-1)) /* Open help sub-file for writing */ { Irestore_context(save); fclose(file); return aerror("Unable to open help file"); } for (i=0; i<CODED_SIZE; i++) { coded[i].c1 = coded[i].c2 = 0; coded[i].count = 0; } frequencies = (unsigned char *)malloc(0x10000); overflow = (char_pair_hash *)malloc(OVERFLOW_SIZE*sizeof(char_pair_hash)); if (frequencies == NULL || overflow == NULL) { Irestore_context(save); fclose(file); free((void *)frequencies); free((void *)overflow); return aerror("Not enough memory to build help database"); } for (i=0; i<256; i++) cx1[i] = cx2[i] = 0; for (pass=1; pass<=PASS_COUNT; pass++) { term_printf("Start of pass %d\n", pass); if (pass == PASS_COUNT) { v = getvector(TAG_VECTOR, TYPE_STRING, CELL+4+indexlength); nil = C_nil; /* * I will get another vectors the same size so that I have plenty of * space for a simple-minded implementation of merge-sort. */ if (!exception_pending()) { push(v); v1 = getvector(TAG_VECTOR, TYPE_STRING, CELL+4+indexlength); pop(v); nil = C_nil; } else v1 = nil; if (exception_pending()) { flip_exception(); IcloseOutput(); Irestore_context(save); fclose(file); free((void *)frequencies); free((void *)overflow); flip_exception(); return nil; } } indexlength = 512; fseek(file, SEEK_SET, 0L); for (i=0; i<0x10000; i++) frequencies[i] = 0; for (i=0; i<OVERFLOW_SIZE; i++) { overflow[i].c1 = overflow[i].c2 = 0; overflow[i].count = 0; } for (i=0; i<16; i++) buff[i] = 0; buffp = 0; i = 100; saving = 0; /* An "info" file has a little header at the top - skip that */ while ((c2 = getc(file)) != EOF && c2 != INFO_CHAR) /* do nothing */; c2 = getc(file); /* newline following the ^_ */ linep = 0; info_seen = 0; while ((c2 = getc(file)) != EOF) { unsigned32 x; int n; if (c2 == '\n') { line[linep] = 0; if (linep == 1 && line[0] == INFO_CHAR) { int32 bp = buffp; /* * I flush the compression look-ahead buffer when I find a "^_" record * so that the break between help topics is on a real byte boundary and so * that I can tell where in the help file this boundary will fall. */ for (;;) { bp++; c1 = buff[bp & 15]; buff[bp & 15] = 0; if (c1 == 0) break; if (pass == PASS_COUNT) { if (c1 == INFO_CHAR) Iputc(0); else Iputc(c1); helpsize++; } } info_seen = helpsize; linep = 0; continue; /* Throws away the '\n' after '^_' */ } else if (info_seen >= 0) { if (strcmp(line, "Tag Table:") == 0) break; /* * Here I must spot "File:" lines and count the size of the node name and/or * insert it in the index vector. */ if (strncmp(line, "File: ", 6) == 0) { linep = linep-6; while (linep>0 && strncmp(&line[linep], "Node: ", 6) != 0) linep--; if (linep != 0) { char *node = &line[linep+6]; int nodelen = 0; /* * I will force node labels into upper case here. I use upper rather than * lower case mainly because it turns out to make it easier for me to compare * the sorted order of my key-table with the order imposed by a (DOS) sort * utility I have. In particular it makes the collating order of '_' with * letters compatible with the independent external utility. */ while (node[nodelen] != ',' && node[nodelen] != 0) { node[nodelen] = (char)toupper(node[nodelen]); nodelen++; } if (nodelen > 28) nodelen = 28; if (pass == PASS_COUNT) { ucelt(v, indexlength++) = 0; ucelt(v, indexlength++) = (unsigned char)(info_seen & 0xff); ucelt(v, indexlength++) = (unsigned char)((info_seen >> 8) & 0xff); ucelt(v, indexlength++) = (unsigned char)((info_seen >> 16) & 0xff); #ifdef DEBUG_HELP_SYSTEM term_printf("Node(%.*s) position %d\n", nodelen, node, info_seen); #endif while (nodelen-- != 0) celt(v, indexlength++) = *node++; while (indexlength & 7) celt(v, indexlength++) = 0; } else indexlength = indexlength + ((nodelen + 11) & ~7); } } info_seen = -1; } else info_seen = -1; linep = 0; } else if (linep < 255) line[linep++] = (char)c2; /* * I truncate lines at 255 characters. This is not so comfortable as all that! * The Reduce Help Database ends up with lines of up to 195 characters long, * in cases where the names of several adjacent sections are all ridiculously * long. */ cx1[c2] = (unsigned char)c2; for (;;) { c3 = buff[(buffp-1) & 15]; if (c3 != 0) { int c4 = 0; int32 hash = ((((c3 & 0xff)<<8)+ (c2 & 0xff))*32359) % CODED_SIZE; for (;;) { if (coded[hash].count == 0) break; else if (coded[hash].c1 == c3 && coded[hash].c2 == c2) { c4 = coded[hash].count; buffp--; buff[buffp & 15] = 0; saving++; break; } hash++; if (hash == CODED_SIZE) hash = 0; } if (c4 != 0) { c2 = c4; continue; } } break; } c1 = buff[(buffp+1) & 15]; c3 = buff[(buffp+2) & 15]; buff[buffp & 15] = (char)c2; buffp++; buff[buffp & 15] = 0; c2 = c3; if (c1 == 0 || c2 == 0 || c1 == INFO_CHAR || c2 == INFO_CHAR) continue; if (pass == PASS_COUNT) { if (c1 == INFO_CHAR) Iputc(0); /* terminate a section */ else Iputc(c1); helpsize++; } x = ((c1 & 0xff) << 8) | (c2 & 0xff); n = frequencies[x]; if (--i == 0) { stackcheck0(0); i = 100; } if (n == 255) { x = (x*32359) % OVERFLOW_SIZE; /* * In general I expect inserting character-pairs in this table will only * take a few probes. But any scan that takes over 3*OVERFLOW_SIZE/4 is * abandoned. The effect is that worst-case behaviour could eventually * fill the table up totally, so this long-stop would be the only thing * preventing the code from looping for ever. So then it would run around * 200 times slower than usual, but it would eventually finish! Such bad cases * can not happen with reasonable input data. */ for (n=0;n<(3*OVERFLOW_SIZE)/4;n++) { if (overflow[x].count == 0) { overflow[x].c1 = (char)c1; overflow[x].c2 = (char)c2; overflow[x].count = 256; break; } else if (c1 == overflow[x].c1 && c2 == overflow[x].c2) { overflow[x].count++; break; } x = x + 1; if (x == OVERFLOW_SIZE) x = 0; } } else frequencies[x] = (unsigned char)(n+1); } /* * It is possible (probable!) that at the end of processing there are a few * characters left buffered up. Flush them out now. */ if (pass == PASS_COUNT) { for (;;) { buffp++; c1 = buff[buffp & 15]; buff[buffp & 15] = 0; if (c1 == INFO_CHAR) Iputc(0); else Iputc(c1); helpsize++; if (c1 == 0) break; /* NB I write a zero to terminate */ } } term_printf("Saving this pass was %d\n", saving); qsort(overflow, (size_t)OVERFLOW_SIZE, sizeof(char_pair_hash), compare_char_counts); if (pass < PASS_COUNT) { for (i=0; i<(pass==PASS_COUNT-1 ? OVERFLOW_SIZE : 10); i++) { int rep; int32 hash; if (overflow[i].c1 == 0 || overflow[i].c2 == 0) continue; for (rep=1; rep<256; rep++) if (cx1[rep]==0) break; if (rep == 256) break; c1 = overflow[i].c1; c2 = overflow[i].c2; cx1[rep] = (unsigned char)c1; cx2[rep] = (unsigned char)c2; hash = ((((c1 & 0xff)<<8)+(c2 & 0xff))*32359) % CODED_SIZE; for (;;) { if (coded[hash].count == 0) { coded[hash].c1 = (char)c1; coded[hash].c2 = (char)c2; coded[hash].count = rep; break; } else if (coded[hash].c1 == c1 && coded[hash].c2 == c2) break; hash++; if (hash == CODED_SIZE) hash = 0; } term_printf("%.2x %.2x => %.2x (%d)\n", c1 & 0xff, c2 & 0xff, rep & 0xff, overflow[i].count); } } } celt(v, indexlength) = 0; /* needed as a terminator */ for (i=0; i<256; i++) { celt(v, 2*i) = cx1[i]; celt(v, 2*i+1) = cx2[i]; } i = Ioutsize() & 3; while ((i & 3) != 0) Iputc(0), i++; /* Pad to multiple of 4 bytes */ IcloseOutput(); fclose(file); free((void *)frequencies); free((void *)overflow); trace_printf("%ld bytes of help data\n", (long)helpsize); Irestore_context(save); /* * Now I have made a help module and an associated index vector, however * the index information is at present unordered. I want to sort it but * the situation is a little curious - the items in the vector are of * variable length and so most of the sorting methods I can think of * are not easily applied. I guess that merge-sort is the solution... */ merge_sort(&celt(v, 0), &celt(v1, 0), 512, indexlength); #ifdef DEBUG_HELP_SYSTEM /* Now, mainly as a debugging measure, I display the sorted index */ term_printf("\nSorted index\n"); i = 512; while (i < indexlength) { for (len=4; len<32; len++) { c1 = celt(v, i+len); if (c1 == 0) break; term_printf("%c", c1); } for (;(len&7)!=0; len++) term_printf(" "); buffp = ucelt(v, i+3) & 0xff; buffp = (buffp << 8) + (ucelt(v, i+2) & 0xff); buffp = (buffp << 8) + (ucelt(v, i+1) & 0xff); i += len; for (;len<36; len++) term_printf(" "); term_printf("%7d\n", buffp); } #endif help_index = v; /* Only set up the index vector if all seemed OK */ return onevalue(nil); #endif /* DEMO_MODE */ } /* * Here I will have a simulation of some modest part of the "curses" * interface that Unix tends to support. I will certainly not support * everything - just a minimum that I think I need for my help browser. * I support the following environments * (a) Watcom C for DOS, using the Watcom graphics library * (b) Unix using real "curses", but adding two new functions initkb() * and resetkb() to switch to unbuffered un-echoed input from getch() * (c) Watcom C and Windows (win32) using a separate 25 by 80 window * for all the text output here. This case will be flagged by having * the pre-processor symbol WINDOWS_NT defined. */ #include <ctype.h> #ifdef WINDOWS_NT /* * Under win32 I will have the implementation of all this stuff as * part of my window manager code, and hence elsewhere. So I just provide * a collection of declarations to show what will be available. */ /* * For Windows I will only support an 80 by 25 window. I guess it * would be easy enough to permit other sizes, except that I do not have * an easy answer to what should happen if the user re-sizes the window * while other things are going on. Hence my conservative caution - at * least for now! */ extern int LINES, COLS; /* initscr() must be called once at the start of a run */ extern void initscr(void); /* * initkb() and resetkb() delimit regions in the code where keyboard * input is treated as requests to the curses window but is accepted * with no delay and no echo. Also mouse events can be posted during * this time. */ extern void initkb(void); extern void resetkb(void); extern int mouse_button; /* set non-zero when user presses a button */ extern int mouse_cx; /* 0 <= mouse_cx < COLS */ extern int mouse_cy; /* 0 <= mouse_cy < LINES */ /* refresh() is called to force the screen to be up to date */ extern void refresh(); /* endwin() hides the curses window, restoring simple text handling */ extern void endwin(void); /* Move text insertion point. Origin (0,0) is top left of screen */ extern void move(int y, int x); /* standout() and standend() delimit inverse video (or whatever) text */ extern void standout(void); extern void standend(void); /* erase() clears the whole screen */ extern void erase(void); /* * addch() and addstr() add text to the screen, advancing the cursor. I * view it as illegal to write beyond either right or bottom margin of the * screen. */ extern void addch(int ch); extern void addstr(char *s); /* * getch() reads a character from the keyboard. It does not wait for * a newline, and does not echo anything. Because the name getch() may be * in use in some C libraries in a way that could conflict I use some * re-naming here. If there has been a mouse-click recently then getch() * should return a value (0x100 + bits) where the odd bits may indicate which * button was pressed. In that case (mouse_cx,mouse_cy) will be the * character-position coordinates at which the hit was taken. Systems * that can not support a mouse do not have to worry about this and can always * return a value in the range 0..255, or EOF. On some systems getch() will * return 0 with no delay if there is no character available (so that * the application will busy-wait). On others it is entitled to wait until * the user presses a key. But (once again) it should not do line editing or * wait for an ENTER. */ extern int my_getch(void); #undef getch #define getch() my_getch() #else /* WINDOWS_NT */ #ifdef __WATCOMC__ /* * Here I view __WATCOMC__ as flagging an implementation using MSDOS, * and in this context I will take that to mean DOS/4GW */ #include <dos.h> #include <i86.h> #include <graph.h> int LINES=0, COLS=0; int XPIXELS=0, YPIXELS=0; static int in_curses_mode = 0; /* * I seem to observe that when I run this in a DOS box under Windows * (Windows 95 at least) in a DOS window then the first time I try my * DOS window is expanded to full screen. If I shrink it back with * ALT-ENTER then subsequent runs of a program that uses initsrc() do not * seem to mazimize the window. This seems a little odd! */ void initscr() { struct videoconfig vinfo; _getvideoconfig(&vinfo); COLS = vinfo.numtextcols; LINES = vinfo.numtextrows; XPIXELS = vinfo.numxpixels; /* In text screen-modes I expect all characters to be 8x8 */ if (XPIXELS == 0) XPIXELS = 8*COLS; YPIXELS = vinfo.numypixels; if (YPIXELS == 0) YPIXELS = 8*LINES; _settextposition(1, 1); in_curses_mode = 1; } int mouse_cx = 0; int mouse_cy = 0; static int mouse_button = 0; #pragma off (check_stack) void _loadds far mouse_click_handler (int max, int mcx, int mdx) { #pragma aux mouse_click_handler parm [EAX] [ECX] [EDX] mouse_cx = (COLS*mcx)/XPIXELS; mouse_cy = (LINES*mdx)/YPIXELS; mouse_button = max & 0xe; } #pragma on (check_stack) void initkb() { struct SREGS sregs; union REGS inregs, outregs; int far *ptr; int (far *function_ptr)(); segread(&sregs); /* check for mouse driver */ inregs.w.ax = 0; int386(0x33, &inregs, &outregs); if (outregs.w.ax == -1) { /* show mouse cursor */ inregs.w.ax = 0x1; int386(0x33, &inregs, &outregs); /* install click watcher */ inregs.w.ax = 0xC; inregs.w.cx = 0x0002 + 0x0008; function_ptr = mouse_click_handler; inregs.x.edx = FP_OFF(function_ptr); sregs.es = FP_SEG(function_ptr); int386x(0x33, &inregs, &outregs, &sregs); mouse_button = 0; } } void resetkb() { /* check installation again (to clear watcher) */ union REGS inregs, outregs; inregs.w.ax = 0; int386(0x33, &inregs, &outregs); mouse_button = 0; } /* * In this implementation I will reflect changes to the display * instantly, so refresh() [which curses needs] will be a no-op, * except that if I had left curses mode re-entering it should clear * the screen. */ void refresh() { if (!in_curses_mode) { _clearscreen(_GWINDOW); _settextposition(1, 1); in_curses_mode |= 1; } } void endwin() { _settextposition(LINES, 1); in_curses_mode = 0; } void move(int y, int x) { _settextposition(y+1, x+1); } void standout() { _settextcolor(0); _setbkcolor(7); } void standend() { _settextcolor(7); _setbkcolor(0); } void erase() { _clearscreen(_GWINDOW); _settextposition(1, 1); in_curses_mode = 1; } void addch(int ch) { char b[4]; b[0] = ch; b[1] = 0; _outtext(b); } void addstr(char *s) { _outtext(s); } int my_getch() { if (mouse_button != 0) { int w = mouse_button; mouse_button = 0; return 0x100 + w; } if (!kbhit()) return 0; return getch(); } #undef getch #define getch() my_getch() #else /* __WATCOMC__ */ /* * Assume Unix here - or some system providing Unix compatibility. * Note that "curses" may not always be installed, but is needed here * if the embedded help system is to work. */ #include <curses.h> /* * In fact for the curses-Unix style interface I do not support a mouse, * but that is no great problem - I just let mouse_button remain zero * always. */ int mouse_button = 0; /* set non-zero when user presses a button */ int mouse_cx = 0; /* 0 <= mouse_cx < COLS */ int mouse_cy = 0; /* 0 <= mouse_cy < LINES */ void initkb() { cbreak(); noecho(); } void resetkb() { nocbreak(); echo(); } #endif /* __WATCOMC__ */ #endif /* WINDOWS_NT */ /* * End of curses compatibility code */ char file[256], node[256], next[256], prev[256], up[256]; long int topic_start = 0, topic_header_size = 0; void find_word(char *buffer, char *tag, char *value) { int len = strlen(tag), ch; *value = 0; while (*buffer != 0) { if (strncmp(buffer, tag, len) != 0) { buffer++; continue; } buffer += len; while ((ch = *buffer) == ' ' && ch != 0) buffer++; if (ch == 0) return; while ((ch = *buffer++) != ',' && ch != 0) *value++ = (char)ch; *value = 0; return; } } static int shown_lines = 0; static unsigned char cstack[28]; static int cstackp; /* * I have here some fairly simple compression on the help text. Characters * can either stand for themselves or for pairs of characters. The table in * the first 512 bytes of the index table indicates which. If at location * (2*i, 2*i+1) this table contains (p,q) then q=0 means that the character * i stands for itself (and p=i). Otherwise i expands to p followed by q where * each of these are subject to the same potential expansion. Code 0 is * reserved as a section or file terminator. */ static int getc_help(void) { Lisp_Object nil = C_nil; Lisp_Object v = help_index; unsigned char *p; int k, c2; CSL_IGNORE(nil); p = &ucelt(v, 0); if (cstackp == 0) k = Igetc(); else k = cstack[--cstackp]; for (;;) { if (k == EOF || k == 0) return 0; c2 = p[2*k+1]; if (c2 == 0) return k; cstack[cstackp++] = (unsigned char)c2; k = p[2*k]; } } #define MAX_MENUS 32 static int at_end_of_topic = 0; static int menu_line[MAX_MENUS], menu_col[MAX_MENUS], max_menu, active_menu; static char menu_text[MAX_MENUS][40]; void display_next_page(void) { int ch, line = 0, col, llen = 80, i, j; char buffer[256]; if (COLS < 80) llen = COLS; erase(); at_end_of_topic = 0; max_menu = active_menu = -1; /* * There is an "ugly" here. The sprintf that formats the header line * does not protect against over-long topic-names that could lead to over-full * buffers. I make the buffer 256 characters long and hope! I force a '\0' * in at column 80 (or whatever) later on to effect truncation. */ sprintf(buffer, "Node: %s, Next: %s, Prev: %s, Up:%s", node, next, prev, up); buffer[llen] = 0; move(0, 0); addstr(buffer); while (++line < LINES) { col = 0; while ((ch = getc_help()) != '\n') { if (ch == 0 || ch == EOF) { at_end_of_topic = 1; break; } if (col < llen) buffer[col++] = (char)ch; } if (at_end_of_topic) break; buffer[col] = 0; for (i=0; i<col && !(buffer[i]=='*' && buffer[i+1]==' '); i++); for (j=i+1; j<col && !(buffer[j]==':' && buffer[j+1]==':'); j++); if (j < col && max_menu < MAX_MENUS-2) { max_menu++; menu_line[max_menu] = line; menu_col[max_menu] = i + 2; memset(menu_text[max_menu], 0, 39); strncpy(menu_text[max_menu], &buffer[i+2], j-i-2); menu_text[max_menu][39] = 0; } move(line, 0); addstr(buffer); shown_lines++; } refresh(); } void skip_some_lines(int n) { int ch, line = 0, col; char buffer[16]; at_end_of_topic = 0; while (++line <= n) { col = 0; while ((ch = getc_help()) != '\n') { if (ch == 0 || ch == EOF) { at_end_of_topic = 1; break; } if (col < 8) buffer[col++] = (char)ch; } if (at_end_of_topic) break; shown_lines++; } } static int topic_in_index(char *key) { int len = strlen(key); Lisp_Object nil = C_nil; Lisp_Object v = help_index; int32 size, i, low, high, offset; int k, l; char *p; CSL_IGNORE(nil); if (len > 28) len = 28; if (!is_vector(v)) return 0; size = length_of_header(vechdr(v)) - CELL; p = &celt(v, 0); /* * The first 512 bytes of the help index contain data for the decompression * process, and so are not used in the following search. * I stop at size-4 on the next line because I added an extra 4 bytes * of padding on the end of the help index to terminate the last entry. */ low = 512; high = size-4; /* * Do a binary search a bit, but when I am down to a fairly narrow * range drop down to linear scan. Note that binary search is somewhat * curious given that the items in my index are variable length! */ while (high > low + 64) /* largest item in table is 28 bytes */ { int32 mid = (high + low)/2; mid &= ~7; /* Align it properly */ /* * At this stage mid might point part way through an index entry. Move it * up until it points at something that has a zero first byte. Because * I started off with low and high well separated this is guaranteed to * terminate with mid strictly between low and high. I slide up rather * than down to (slightly) balance the rounding down that happened in * the original calculation of the mid-point. */ while (p[mid] != 0) mid += 8; #ifdef DEBUG_HELP_SYSTEM term_printf("Compare %.*s with %s\n", len, key, &p[mid+4]); #endif for (k=0; k<len && toupper(key[k]) == p[mid+k+4]; k++) {}; if (k < len) { if (toupper(key[k]) < p[mid+k+4]) high = mid; else low = mid; continue; } else if (p[mid+k+4] != 0) { high = mid; continue; } low = high = mid; /* Found it exactly */ break; } l = 0; for (i=low; i<high; i=i+l+4) { l = 4; while (p[i+l+4] != 0) l += 8; if (len > l) continue; for (k=0; k<len && toupper(key[k]) == p[i+k+4]; k++) {}; if (k < len) continue; if (p[i+len+4] != 0) continue; l = 0; /* Match found: mark the fact with l=0 */ break; } if (l != 0) return 0; /* Failed to find the key */ offset = p[i+3] & 0xff; offset = (offset << 8) + (p[i+2] & 0xff); offset = (offset << 8) + (p[i+1] & 0xff); IcloseInput(NO); if (Iopen_help(offset)) return 0; topic_start = offset; cstackp = 0; return 1; } int find_topic(char *s) { char buffer[256]; int i, c1; #ifdef DEBUG_HELP_SYSTEM term_printf("Find-topic \"%s\"\n", s); #endif if (!topic_in_index(s)) return 0; #ifdef DEBUG_HELP_SYSTEM term_printf("Found in index at %d\n", topic_start); #endif shown_lines = 0; cstackp = 0; for (i=0, c1=getc_help();c1!='\n';c1=getc_help()) if (i < 250) buffer[i++] = (char)c1; buffer[i] = 0; topic_header_size = i; find_word(buffer, "Node:", node); find_word(buffer, "File:", file); find_word(buffer, "Next:", next); find_word(buffer, "Prev:", prev); find_word(buffer, "Up:", up); #ifdef DEBUG_HELP_SYSTEM term_printf("%s:%s:%s:%s:%s\n", node, file, next, prev, up); #endif display_next_page(); return 1; } void restart_topic(void) { IcloseInput(NO); if (!Iopen_help(topic_start)) { int i; for (i=0; i<topic_header_size; i++) getc_help(); } cstackp = 0; } static void help_about_help_browser(void) { int ch; erase(); move( 1, 0); addstr("*** HELP BROWSER COMMANDS ***"); move( 3, 0); addstr("b go Back to start of topic"); move( 4, 0); addstr("space move on one page through topic"); move( 5, 0); addstr("delete move back one page in topic"); move( 6, 0); addstr("?, h display this Help text"); move( 7, 0); addstr("n go to Next topic"); move( 8, 0); addstr("p go to Previous topic"); move( 9, 0); addstr("u go Up a level"); move(10, 0); addstr("q Quit"); move(11, 0); addstr("tab, m Select next Menu item"); move(12, 0); addstr("ENTER, f Follow selected menu item"); move(13, 0); addstr("1-9 First 9 menu items visible"); move(15, 0); addstr("[Type SPACE or ENTER to continue]"); refresh(); while ((ch = getch()) != ' ' && ch != '\n' && ch != '\r'); } static int help_main(char *s) { int i, w; initscr(); initkb(); if (!find_topic(s)) return 1; for (;;) { w = getch(); switch (tolower(w)) { case 'q': break; case 'n': if (next[0] != 0) { if (!find_topic(next)) goto redisplay_current_topic; } continue; case 'p': if (prev[0] != 0) { if (!find_topic(prev)) goto redisplay_current_topic; } continue; case 'u': if (up[0] != 0) { if (!find_topic(up)) goto redisplay_current_topic; } continue; case ' ': if (!at_end_of_topic) display_next_page(); continue; case 0x8: case 0x7f: case 0xff: if (shown_lines <= (LINES-2)) continue; i = shown_lines - 2*LINES + 2; if (i < 0) i = 0; restart_topic(); shown_lines = 0; skip_some_lines(i); display_next_page(); continue; case '?': case 'h': help_about_help_browser(); /* Drop through */ redisplay_current_topic: case 'b': restart_topic(); shown_lines = 0; display_next_page(); continue; case '\t': case 'm': /* For this version I make "m" skip to the next menu item */ if (max_menu < 0) continue; if (active_menu >= 0) { move(menu_line[active_menu], menu_col[active_menu]); addstr(menu_text[active_menu]); active_menu++; if (active_menu > max_menu) active_menu = 0; } else active_menu = 0; move(menu_line[active_menu], menu_col[active_menu]); standout(); addstr(menu_text[active_menu]); standend(); refresh(); continue; case '\n': /* Follow a menu item, as selected */ case '\r': case 'f': if (max_menu >= 0 && active_menu >= 0) { if (!find_topic(menu_text[active_menu])) goto redisplay_current_topic; } continue; case '1': case '2': case '3': case '4': case '5': case '6': case '7': case '8': case '9': w = w - '1'; if (w <= max_menu) { if (!find_topic(menu_text[w])) goto redisplay_current_topic; } continue; default: continue; } break; } resetkb(); endwin(); return 0; } static void help(char *word, int len) { Ihandle save; char key[32]; Icontext(&save); if (Iopen_help(0)) debug_printf("\nNo heap available\n"); else { if (len > 28) len = 28; key[len] = 0; while (--len >= 0) key[len] = word[len]; /* memcpy(key, word, len); <curses.h> on a sparc kills this!! */ /* key[len] = 0; by its attempts to mix BSD & sysV. */ if (help_main(key)) debug_printf("\nNo help available\n"); IcloseInput(NO); } Irestore_context(save); return; } Lisp_Object lisp_help(Lisp_Object nil, Lisp_Object a) { switch ((int)a & TAG_BITS) { case TAG_SYMBOL: #ifndef COMMON if (a == nil) { help("Top", 3); /* this tag is the default one to give */ return onevalue(nil); } #endif a = get_pname(a); errexit(); case TAG_VECTOR: if (type_of_header(vechdr(a)) == TYPE_STRING) { Header h = vechdr(a); int32 len = length_of_header(h); /* counts in bytes */ len -= CELL; help(&celt(a, 0), len); return onevalue(nil); } case TAG_CONS: #ifdef COMMON if (a == nil) { help("Top", 3); return onevalue(nil); } #endif while (consp(a)) { push(a); lisp_help(nil, qcar(a)); pop(a); errexit(); a = qcdr(a); } return onevalue(nil); case TAG_BOXFLOAT: default: return onevalue(nil); } } Lisp_Object Lhelp(Lisp_Object nil, Lisp_Object a) { return lisp_help(nil, a); } Lisp_Object Lhelp_2(Lisp_Object nil, Lisp_Object a, Lisp_Object b) { push(b); lisp_help(nil, a); pop(b); errexit(); return lisp_help(nil, b); } Lisp_Object MS_CDECL Lhelp_n(Lisp_Object nil, int nargs, ...) { if (nargs == 0) help("Top", 0); else { va_list a; int i; va_start(a, nargs); push_args(a, nargs); for (i=0; i<nargs; i++) { Lisp_Object c = stack[i-nargs+1]; lisp_help(nil, c); errexitn(nargs); } popv(nargs); } return onevalue(nil); } #else Lisp_Object Lwrite_help_module(Lisp_Object nil, Lisp_Object a, Lisp_Object b) { return onevalue(nil); } Lisp_Object Lhelp(Lisp_Object nil, Lisp_Object a) { term_printf("HELP not built in to this version of the system\n"); return onevalue(nil); } Lisp_Object Lhelp_2(Lisp_Object nil, Lisp_Object a, Lisp_Object b) { return Lhelp(nil, a); } Lisp_Object MS_CDECL Lhelp_n(Lisp_Object nil, int nargs, ...) { return Lhelp(nil, nil); } #endif /* HELP_SYSTEM */ char prompt_string[32]; Lisp_Object Lsetpchar(Lisp_Object nil, Lisp_Object a) { Lisp_Object old = prompt_thing; CSL_IGNORE(nil); prompt_thing = a; #define escape_nolinebreak 0x80 escaped_printing = escape_nolinebreak; set_stream_write_fn(lisp_work_stream, count_character); memory_print_buffer[0] = 0; set_stream_write_other(lisp_work_stream, write_action_list); stream_char_pos(lisp_work_stream) = 0; active_stream = lisp_work_stream; push(old); #ifdef DEMO_MODE { char *s = "DemoRed"; while (*s != 0) count_character(*s++, lisp_work_stream); } #endif internal_prin(a, 0); pop(old); errexit(); #ifdef CWIN cwin_set_prompt(memory_print_buffer); #endif memcpy(prompt_string, memory_print_buffer, 32); prompt_string[31] = 0; return onevalue(old); } /* end of fasl.c */