File r36/doc/PM.DOC artifact 72a6a1fd21 part of check-in ae412d007f




                       PM - A REDUCE Pattern Matcher


                               Kevin McIsaac

                    The University of Western Australia
                                    and
                           The RAND Corporation

                              kevin@wri.com


PM is a general pattern matcher similar in style to those found in systems
such as SMP and Mathematica, and is based on the pattern matcher described
in Kevin McIsaac, "Pattern Matching Algebraic Identities", SIGSAM Bulletin,
19 (1985), 4-13.  The following is a description of its structure.

A template is any expression composed of literal elements (e.g. "5", "a" or
"a+1") and specially denoted pattern variables (e.g. ?a or ??b).  Atoms
beginning with `?' are called generic variables and match any expression.
Atoms beginning with `??' are called multi-generic variables and match any
expression or any sequence of expressions including the null or empty
sequence.  A sequence is an expression of the form `[a1, a2,...]'.  When
placed in a function argument list the brackets are removed, i.e. f([a,1])
-> f(a,1) and f(a,[1,2],b) -> f(a,1,2,b).

A template is said to match an  expression  if the template is literally
equal to the expression or if by replacing any of the generic or
multi-generic symbols occurring in the template, the template can be made
to be literally equal to the expression.  These replacements are called the
bindings for the generic variables.  A replacement is an expression of the
form `exp1 -> exp2', which means exp1 is replaced by exp2, or `exp1 -->
exp2', which is the same except exp2 is not simplified until after the
substitution for exp1 is made.  If the expression has any of the
properties; associativity, commutativity, or an identity element, they are
used to determine if the expressions match.  If an attempt to match the
template to the expression fails the matcher backtracks, unbinding generic
variables, until it reached a place were it can make a different choice.
It then proceeds along the new branch.

The current matcher proceeds from left to right in a depth first search of
the template expression tree.  Rearrangements of the expression are
generated when the match fails and the matcher backtracks.

The matcher also supports semantic matching.  Briefly, if a subtemplate
does not match the corresponding subexpression because they have different
structures then the two are equated and the matcher continues matching the
rest of the expression until all the generic variables in the subexpression
are bound.  The equality is then checked.  This is controlled by the switch
`semantic'.  By default it is on.

M(exp,temp)

   The template, temp, is matched against the expression, exp.  If the
   template is literally equal to the expression `T' is returned.  If the
   template is literally equal to the expression after replacing the
   generic variables by their bindings then the set of bindings is returned
   as a set of replacements.  Otherwise 0 (nil) is returned.

Examples:

        A "literal" template
        m(f(a),f(a));
        T

        Not literally equal
        m(f(a),f(b));
        0

        Nested operators
        m(f(a,h(b)),f(a,h(b)));
        T

        a "generic" template
        m(f(a,b),f(a,?a));
        {?A->B}

        m(f(a,b),f(?a,?b));
        {?B->B,?A->A}

        The Multi-Generic symbol, ??a, takes "rest" of arguments
        m(f(a,b),f(??a));
        {??A->[A,B]}

        but the Generic symbol, ?a, does not
        m(f(a,b),f(?a));
        0

        Flag h as associative
        flag('(h),'assoc);
        Associativity is used to "group" terms together
        m(h(a,b,d,e),h(?a,d,?b));
        {?B->E,?A->H(A,B)}

        "plus" is a symmetric function
        m(a+b+c,c+?a+?b);
        {?B->A,?A->B}

        it is also associative
        m(a+b+c,b+?a);
        {?A->C + A}

        Note the affect of using multi-generic symbol is different
        m(a+b+c,b+??c);
        {??C->[C,A]}

temp _= logical-exp

   A template may be qualified by the use of the conditional operator `_=',
   such!-that.  When a such!-that condition is encountered in a template it
   is held until all generic variables appearing in logical-exp are bound.
   On the binding of the last generic variable logical-exp is simplified
   and if the result is not `T' the condition fails and the pattern matcher
   backtracks.  When the template has been fully parsed any remaining held
   such-that conditions are evaluated and compared to `T'.

Examples:

        m(f(a,b),f(?a,?b_=(?a=?b)));
        0

        m(f(a,a),f(?a,?b_=(?a=?b)));
        {?B->A,?A->A}

        Note that f(?a,?b_=(?a=?b)) is the same as f(?a,?a)

S(exp,{temp1->sub1,temp2->sub2,...},rept, depth)

   Substitute the set of replacements into exp, resubstituting a maximum of
   'rept' times and to a maximum depth 'depth'. 'Rept' and 'depth' have the
   default values of 1 and infinity respectively.  Essentially S is a
   breadth first search and replace.

   Each template is matched against exp until a successful match occurs.
   Any replacements for generic variables are applied to the rhs of that
   replacement and exp is replaced by the rhs.  The substitution process is
   restarted on the new expression starting with the first replacement.  If
   none of the templates match exp then the first replacement is tried
   against each sub-expression of exp.  If a matching template is found
   then the sub-expression is replaced and process continues with the next
   sub-expression.

   When all sub-expressions have been examined, if a match was found, the
   expression is evaluated and the process is restarted on the
   sub-expressions of the resulting expression, starting with the first
   replacement.  When all sub-expressions have been examined and no match
   found the sub-expressions are reexamined using the next replacement.
   Finally when this has been done for all replacements and no match found
   then the process recures on each sub-expression.

   The process is terminated after rept replacements or when the expression
   no longer changes.

Si(exp,{temp1->sub1,temp2->sub2,...}, depth)

   Substitute  infinitely many times until  expression  stops  changing.
   Short  hand  notation  for   S(exp,{temp1->sub1,temp2->sub2,...},Inf,
   depth)

Sd(exp,{temp1->sub1,temp2->sub2,...},rept, depth)

   Depth first version of Substitute.

Examples:

        s(f(a,b),f(a,?b)->?b^2);
         2
        B

        s(a+b,a+b->a*b);
        B*A

        "associativity" is used to group a+b+c in to (a+b) + c
        s(a+b+c,a+b->a*b);
        B*A + C

The next three examples use a rule set that defines the factorial function.
        Substitute once
        s(nfac(3),{nfac(0)->1,nfac(?x)->?x*nfac(?x-1)});
        3*NFAC(2)

        Substitute twice
        s(nfac(3),{nfac(0)->1,nfac(?x)->?x*nfac(?x-1)},2);
        6*NFAC(1)

        Substitute until expression stops changing
        si(nfac(3),{nfac(0)->1,nfac(?x)->?x*nfac(?x-1)});
        6

        Only substitute at the top level
        s(a+b+f(a+b),a+b->a*b,inf,0);
        F(B + A) + B*A



temp :- exp

   If during simplification of an expression, temp matches some
   sub-expression then that sub-expression is replaced by exp.  If there is
   a choice of templates to apply the least general is used.

   If a old rule exists with the same template then the old rule is
   replaced by the new rule.  If exp is `nil' the rule is retracted.

temp ::- exp

   Same as temp :- exp, but the lhs is not simplified until the replacement
   is made

   Examples:

Define the factorial function of a natural number as a recursive function
and a termination condition.  For all other values write it as a Gamma
Function.  Note that the order of definition is not important as the rules
are reordered so that the most specific rule is tried first.

        Note the use of `::-' instead of `:-' to stop  simplification of
        the LHS. Hold stops its arguments from being simplified.
        fac(?x_=Natp(?x)) ::- ?x*fac(?x-1);
        HOLD(FAC(?X-1)*?X)

        fac(0)  :- 1;
        1

        fac(?x) :- Gamma(?x+1);
        GAMMA(?X + 1)

        fac(3);
        6

        fac(3/2);
        GAMMA(5/2)

Arep({rep1,rep2,..})

   In  future  simplifications  automatically  apply  replacements  re1,
   rep2...  until the rules are  retracted.  In effect it  replaces  the
   operator `->' by `:-' in the set of replacements {rep1, rep2,...}.

Drep({rep1,rep2,..})

   Delete the rules rep1, rep2,...

As we said earlier, the matcher has been constructed along the lines of the
pattern matcher described in McIsaac with the addition of such-that
conditions and `semantic matching' as described in Grief.  To make a
template efficient some consideration should be given to the structure of
the template and the position of such-that statements.  In general the
template should be constructed to that failure to match is recognize as
early as possible.  The multi-generic symbol should be used when ever
appropriate, particularly with symmetric functions.  For further details
see McIsaac.

Examples:

        f(?a,?a,?b) is better that f(?a,?b,?c_=(?a=?b))
        ?a+??b      is better than ?a+?b+?c...
        The template,  f(?a+?b,?a,?b),  matched  against  f(3,2,1) is
        matched as f(?e_=(?e=?a+?b),?a,?b) when semantic matching is allowed.


                                    Switches
                                    --------

TRPM
   Produces a trace of the rules applied during a substitution.  This is
   useful to see how the pattern matcher works, or to understand an
   unexpected result.

In general usage the following switches need not be considered.

SEMANTIC
   Allow semantic matches, e.g. f(?a+?b,?a,?b) will match f(3,2,1) even
   though the matcher works from left to right.

SYM!-ASSOC
   Limits the search space of symmetric associative functions when the
   template contains multi-generic symbols so that generic symbols will not
   the function.  For example: m(a+b+c,?a+??b) will return {?a -> a, ??b->
   [b,c]} or {?a -> b, ??b-> [a,c]} or {?a -> c, ??b-> [a,b]} but no {?a ->
   a+b, ??b-> c} etc.  No sane template should require these types of
   matches.  However they can be made available by turning the switch off.


REDUCE Historical
REDUCE Sourceforge Project | Historical SVN Repository | GitHub Mirror | SourceHut Mirror | NotABug Mirror | Chisel Mirror | Chisel RSS ]