File r34.1/lib/reacteqn.doc artifact 5646fe9a06 part of check-in ab67b20f90


 
      REDUCE Support for Reaction Equation Systems
 
                 Herbert Melenk
 
            Konrad-Zuse-Zentrum Berlin
 
                 January 1991
 


The REDUCE package REACTEQN allows one to transform chemical reaction 
systems into ordinary differential equation systems (ode) 
corresponding to the laws of pure mass action. 
 
A single reaction equation is an expression of the form
 
  <n1><s1> + <n2><s2> +  ... -> <n3><s3> + <n4><s4> +  ...
                       or
  <n1><s1> + <n2><s2> +  ... <> <n3><s3> + <n4><s4> +  ...
 
where the <si> are arbitrary names of species (REDUCE symbols)
and the <ni> are positive integer numbers. The number 1
can be omitted. The connector -> describes a one way reaction,
while <> describes a forward and backward reaction.

A reaction system is a list of reaction equations, each of them
optionally followed by one or two expressions for the rate
constants. A rate constant can a number, a symbol or an 
arbitrary REDUCE expression. If a rate constant is missing,
an automatic constant of the form RATE(n) (where n is an
integer counter) is generated. For double reactions the
first constant is used for the forward direction, the second
one for the backward direction.
 
The names of the species are collected in a list bound to
the REDUCE variable SPECIES. This list is automatically filled
during the processing of a reaction system. The species enter
in an order corresponding to their appearance in the reaction
system and the resulting ode's will be ordered in the same manner. 
If a list of species is preassigned to the variable
SPECIES either explicitly or from previous operations, the 
given order will be maintained and will dominate the formatting
process. So the ordering of the result can be easily influenced
by the user.
 
Syntax:
    reac2ode {   <reaction> [,<rate> [,<rate>]] 
               [,<reaction> [,<rate> [,<rate>]]] 
                       .... 
                  };
 
        where two rates are applicable only for <> reactions.

        Result is a system of explicit ordinary differential
        equations with polynomial righthand sides. As side
        effect the following variables are set:

         lists:

           rates:  list of the rates in the system

           species: list of the species in the system

         matrices:
 
           inputmat: matrix of the input coefficients
 
           outputmat: matrix of the output coefficients
               
In the matrices the row number corresponds to the input reaction 
number, while the column number corresponds to the species index.

Note: if the rates are numerical values, it will be in most cases
      appropriate to select a REDUCE evaluation mode for floating
      point numbers. That is
        REDUCE 3.3: on float,numval;
        REDUCE 3.4: on rounded;
 
Inputmat and outputmat can be used for linear algebra type 
investigations of the reaction system. The classical reaction 
matrix is the difference of these matrices; however, the two 
matrices contain more information than their differences because 
the appearance of a species on both sides is not reflected by 
the reaction matrix.

EXAMPLES:

% Example taken from Feinberg (Chemical Engineering):

   species := {A1,A2,A3,A4,A5};

   reac2ode {  A1 + A4 <> 2A1,       rho, beta,
               A1 + A2 <> A3,        gamma, epsilon,
               A3      <> A2 + A5,   theta, mue};
 
        
                             2
{DF(A1,T)=RHO*A1*A4 - BETA*A1  - GAMMA*A1*A2 + EPSILON*A3,

 DF(A2,T)= - GAMMA*A1*A2 + EPSILON*A3 + THETA*A3 - MUE*A2*A5,

 DF(A3,T)=GAMMA*A1*A2 - EPSILON*A3 - THETA*A3 + MUE*A2*A5,

                                2
 DF(A4,T)= - RHO*A1*A4 + BETA*A1 ,

 DF(A5,T)=THETA*A3 - MUE*A2*A5}

% the corresponding matrices:

  inputmat;

[1  0  0  1  0]
[             ]
[1  1  0  0  0]
[             ]
[0  0  1  0  0]


  outputmat;

[2  0  0  0  0]
[             ]
[0  0  1  0  0]
[             ]
[0  1  0  0  1]


% computation of the classical reaction matrix as difference
% of output and input matrix:

  reactmat := outputmat-inputmat;

            [1   0   0   -1  0]
            [                 ]
REACTMAT := [-1  -1  1   0   0]
            [                 ]
            [0   1   -1  0   1]

% Example with automatic generation of rate constants
% and automatic extraction of species
 
   species := {};
   reac2ode {  A1 + A4 <> 2A1, 
               A1 + A2 <> A3,
               a3      <> A2 + A5};
 
new species: A1
new species: A4
new species: A3
new species: A2
new species: A5


               2
{DF(A1,T)= - A1 *RATE(2) + A1*A4*RATE(1) - A1*A2*RATE(3) + 

     A3*RATE(4),

            2
 DF(A4,T)=A1 *RATE(2) - A1*A4*RATE(1),

 DF(A2,T)= - A1*A2*RATE(3) - A2*A5*RATE(6) + A3*RATE(5) + A3*RATE(4),

 DF(A3,T)=A1*A2*RATE(3) + A2*A5*RATE(6) - A3*RATE(5) - A3*RATE(4),

 DF(A5,T)= - A2*A5*RATE(6) + A3*RATE(5)}


% Example with rates computed from numerical expressions
 
   species := {};
   reac2ode {  A1 + A4 <> 2A1, 17.3* 22.4^1.5,
                               0.04* 22.4^1.5 };
 
new species: A1
new species: A4

                       2
{DF(A1,T)= - 4.24065*A1  + 1834.08*A1*A4,

                    2
 DF(A4,T)=4.24065*A1  - 1834.08*A1*A4}

Herbert Melenk
Konrad-Zuse-Zentrum fuer Informationstechnik
Heilbronner Str 10
D 1000 Berlin 31
Germany

Phone: (49) 30 89604 195
FAX:   (49) 30 89604 125
e-mail:  melenk@sc.zib-berlin.dbp.de
         melenk@sc.zib-berlin.de (internet)



REDUCE Historical
REDUCE Sourceforge Project | Historical SVN Repository | GitHub Mirror | SourceHut Mirror | NotABug Mirror | Chisel Mirror | Chisel RSS ]