File r33/factor.red artifact 99af573d08 part of check-in 5f584e9b52


module bigmodp; % Modular polynomial arithmetic where the modulus may
                % be a bignum.

% Authors: A. C. Norman and P. M. A. Moore, 1981;

fluid '(current!-modulus modulus!/2);

symbolic procedure general!-plus!-mod!-p(a,b);
% form the sum of the two polynomials a and b
% working over the ground domain defined by the routines
% general!-modular!-plus, general!-modular!-times etc. the inputs to
% this routine are assumed to have coefficients already
% in the required domain;
   if null a then b
   else if null b then a
   else if isdomain a then
      if isdomain b then !*num2f general!-modular!-plus(a,b)
      else (lt b) .+ general!-plus!-mod!-p(a,red b)
   else if isdomain b then (lt a) .+ general!-plus!-mod!-p(red a,b)
   else if lpow a = lpow b then
      adjoin!-term(lpow a,
         general!-plus!-mod!-p(lc a,lc b),
         general!-plus!-mod!-p(red a,red b))
   else if comes!-before(lpow a,lpow b) then
         (lt a) .+ general!-plus!-mod!-p(red a,b)
   else (lt b) .+ general!-plus!-mod!-p(a,red b);

symbolic procedure general!-times!-mod!-p(a,b);
   if (null a) or (null b) then nil
   else if isdomain a then gen!-mult!-by!-const!-mod!-p(b,a)
   else if isdomain b then gen!-mult!-by!-const!-mod!-p(a,b)
   else if mvar a=mvar b then general!-plus!-mod!-p(
     general!-plus!-mod!-p(general!-times!-term!-mod!-p(lt a,b),
                  general!-times!-term!-mod!-p(lt b,red a)),
     general!-times!-mod!-p(red a,red b))
   else if ordop(mvar a,mvar b) then
     adjoin!-term(lpow a,general!-times!-mod!-p(lc a,b),
       general!-times!-mod!-p(red a,b))
   else adjoin!-term(lpow b,
        general!-times!-mod!-p(a,lc b),general!-times!-mod!-p(a,red b));

symbolic procedure general!-times!-term!-mod!-p(term,b);
%multiply the given polynomial by the given term;
    if null b then nil
    else if isdomain b then
        adjoin!-term(tpow term,
            gen!-mult!-by!-const!-mod!-p(tc term,b),nil)
    else if tvar term=mvar b then
         adjoin!-term(mksp(tvar term,iplus(tdeg term,ldeg b)),
                      general!-times!-mod!-p(tc term,lc b),
                      general!-times!-term!-mod!-p(term,red b))
    else if ordop(tvar term,mvar b) then
      adjoin!-term(tpow term,general!-times!-mod!-p(tc term,b),nil)
    else adjoin!-term(lpow b,
      general!-times!-term!-mod!-p(term,lc b),
      general!-times!-term!-mod!-p(term,red b));

symbolic procedure gen!-mult!-by!-const!-mod!-p(a,n);
% multiply the polynomial a by the constant n;
   if null a then nil
   else if n=1 then a
   else if isdomain a then !*num2f general!-modular!-times(a,n)
   else adjoin!-term(lpow a,gen!-mult!-by!-const!-mod!-p(lc a,n),
     gen!-mult!-by!-const!-mod!-p(red a,n));

symbolic procedure general!-difference!-mod!-p(a,b);
   general!-plus!-mod!-p(a,general!-minus!-mod!-p b);

symbolic procedure general!-minus!-mod!-p a;
   if null a then nil
   else if isdomain a then general!-modular!-minus a
   else (lpow a .* general!-minus!-mod!-p lc a) .+
        general!-minus!-mod!-p red a;

symbolic procedure general!-reduce!-mod!-p a;
%converts a multivariate poly from normal into modular polynomial;
    if null a then nil
    else if isdomain a then !*num2f general!-modular!-number a
    else adjoin!-term(lpow a,
                      general!-reduce!-mod!-p lc a,
                      general!-reduce!-mod!-p red a);

symbolic procedure general!-make!-modular!-symmetric a;
% input is a multivariate MODULAR poly A with nos in the range 0->(p-1).
% This folds it onto the symmetric range (-p/2)->(p/2);
    if null a then nil
    else if domainp a then
      if a>modulus!/2 then !*num2f(a - current!-modulus)
      else a
    else adjoin!-term(lpow a,
                      general!-make!-modular!-symmetric lc a,
                      general!-make!-modular!-symmetric red a);

endmodule;


module degsets;   % degree set processing.

% Authors: A. C. Norman and P. M. A. Moore, 1981.

fluid '(!*trallfac
        !*trfac
        bad!-case
        best!-set!-pointer
        dpoly
        factor!-level
        factor!-trace!-list
        factored!-lc
        irreducible
        modular!-info
        one!-complete!-deg!-analysis!-done
        previous!-degree!-map
        split!-list
        valid!-image!-sets);

symbolic procedure check!-degree!-sets(n,multivariate!-case);
% MODULAR!-INFO (vector of size N) contains the modular factors now.
  begin scalar degree!-sets,w,x!-is!-factor,degs;
    w:=split!-list;
    for i:=1:n do <<
      if multivariate!-case then
        x!-is!-factor:=not numberp get!-image!-content
          getv(valid!-image!-sets,cdar w);
      degs:=for each v in getv(modular!-info,cdar w) collect ldeg v;
      degree!-sets:=
        (if x!-is!-factor then 1 . degs else degs)
              . degree!-sets;
      w:=cdr w >>;
    check!-degree!-sets!-1 degree!-sets;
    best!-set!-pointer:=cdar split!-list;
    if multivariate!-case and factored!-lc then <<
      while null(w:=get!-f!-numvec
           getv(valid!-image!-sets,best!-set!-pointer))
       and (split!-list:=cdr split!-list) do
        best!-set!-pointer:=cdar split!-list;
      if null w then bad!-case:=t >>;
            % make sure the set is ok for distributing the
            % leading coefft where necessary;
  end;

symbolic procedure check!-degree!-sets!-1 l;
% L is a list of degree sets. Try to discover if the entries
% in it are consistent, or if they imply that some of the
% modular splittings were 'false';
  begin
    scalar i,degree!-map,degree!-map1,dpoly,
        plausible!-split!-found,target!-count;
    factor!-trace <<
       printc "Degree sets are:";
       for each s in l do <<
          prin2 "     ";
          for each n in s do <<
             prin2 " "; prin2 n >>;
          terpri() >> >>;
    dpoly:=sum!-list car l;
    target!-count:=length car l;
    for each s in cdr l do
        target!-count:=min(target!-count,length s);
    % This used to be IMIN, but since it was the only use, it was
    % eliminated.
    if null previous!-degree!-map then <<
      degree!-map:=mkvect dpoly;
% To begin with all degrees of factors may be possible;
      for i:=0:dpoly do putv(degree!-map,i,t) >>
    else <<
      factor!-trace "Refine an existing degree map";
      degree!-map:=previous!-degree!-map >>;
    degree!-map1:=mkvect dpoly;
    for each s in l do <<
% For each degree set S I will collect in DEGREE-MAP1 a
% bitmap showing what degree factors would be consistent
% with that set. By ANDing together all these maps
% (into DEGREE-MAP) I find what degrees for factors are
% consistent with the whole of the information I have;
      for i:=0:dpoly do putv(degree!-map1,i,nil);
      putv(degree!-map1,0,t);
      putv(degree!-map1,dpoly,t);
      for each d in s do for i:=dpoly#-d#-1 step -1 until 0 do
        if getv(degree!-map1,i) then
           putv(degree!-map1,i#+d,t);
      for i:=0:dpoly do
        putv(degree!-map,i,getv(degree!-map,i) and
             getv(degree!-map1,i)) >>;
    factor!-trace <<
        printc "Possible degrees for factors are: ";
        for i:=1:dpoly#-1 do
          if getv(degree!-map,i) then << prin2 i; prin2 " " >>;
        terpri() >>;
    i:=dpoly#-1;
    while i#>0 do if getv(degree!-map,i) then i:=-1
                 else i:=i#-1;
    if i=0 then <<
       factor!-trace
          printc "Degree analysis proves polynomial irreducible";
       return irreducible:=t >>;
    for each s in l do if length s=target!-count then begin
      % Sets with too many factors are not plausible anyway;
      i:=s;
      while i and getv(degree!-map,car i) do i:=cdr i;
      % If I drop through with I null it was because the set was
      % consistent, otherwise it represented a false split;
      if null i then plausible!-split!-found:=t end;
    previous!-degree!-map:=degree!-map;
    if plausible!-split!-found or one!-complete!-deg!-analysis!-done
      then return nil;
%    PRINTC "Going to try getting some more images";
    return bad!-case:=t
  end;

symbolic procedure sum!-list l;
   if null cdr l then car l
   else car l #+ sum!-list cdr l;




endmodule;


module facmod; % Modular factorization: discover the factor count mod p.

% Authors: A. C. Norman and P. M. A. Moore, 1979.

fluid '(!*timings
        current!-modulus
        dpoly
        dwork1
        dwork2
        known!-factors
        linear!-factors
        m!-image!-variable
        modular!-info
        null!-space!-basis
        number!-needed
        poly!-mod!-p
        poly!-vector
        safe!-flag
        split!-list
        work!-vector1
        work!-vector2);


safe!-flag:=carcheck 0; % For speed of array access - important here;


symbolic procedure get!-factor!-count!-mod!-p
                              (n,poly!-mod!-p,p,x!-is!-factor);
% gets the factor count mod p from the nth image using the
% first half of Berlekamp's method;
  begin scalar old!-m,f!-count,wtime;
    old!-m:=set!-modulus p;
%    PRIN2 "prime = ";% printc current!-modulus;
%    PRIN2 "degree = ";% printc ldeg poly!-mod!-p;
    trace!-time display!-time("Entered GET-FACTOR-COUNT after ",time());
    wtime:=time();
    f!-count:=modular!-factor!-count();
    trace!-time display!-time("Factor count obtained in ",time()-wtime);
    split!-list:=
      ((if x!-is!-factor then car f!-count#+1 else car f!-count) . n)
        . split!-list;
    putv(modular!-info,n,cdr f!-count);
    set!-modulus old!-m
  end;

symbolic procedure modular!-factor!-count();
  begin
    scalar poly!-vector,wvec1,wvec2,x!-to!-p,
      n,wtime,w,lin!-f!-count,null!-space!-basis;
    known!-factors:=nil;
    dpoly:=ldeg poly!-mod!-p;
    wvec1:=mkvect (2#*dpoly);
    wvec2:=mkvect (2#*dpoly);
    x!-to!-p:=mkvect dpoly;
    poly!-vector:=mkvect dpoly;
    for i:=0:dpoly do putv(poly!-vector,i,0);
    poly!-to!-vector poly!-mod!-p;
    w:=count!-linear!-factors!-mod!-p(wvec1,wvec2,x!-to!-p);
    lin!-f!-count:=car w;
    if dpoly#<4 then return
       (if dpoly=0 then lin!-f!-count
        else lin!-f!-count#+1) .
        list(lin!-f!-count . cadr w,
             dpoly . poly!-vector,
             nil);
% When I use Berlekamp I certainly know that the polynomial
% involved has no linear factors;
    wtime:=time();
    null!-space!-basis:=use!-berlekamp(x!-to!-p,caddr w,wvec1);
    trace!-time display!-time("Berlekamp done in ",time()-wtime);
    n:=lin!-f!-count #+ length null!-space!-basis #+ 1;
            % there is always 1 more factor than the number of
            % null vectors we have picked up;
    return n . list(
     lin!-f!-count . cadr w,
     dpoly . poly!-vector,
     null!-space!-basis)
  end;

%**********************************************************************;
% Extraction of linear factors is done specially;

symbolic procedure count!-linear!-factors!-mod!-p(wvec1,wvec2,x!-to!-p);
% Compute gcd(x**p-x,u). It will be the product of all the
% linear factors of u mod p;
  begin scalar dx!-to!-p,lin!-f!-count,linear!-factors;
    for i:=0:dpoly do putv(wvec2,i,getv(poly!-vector,i));
    dx!-to!-p:=make!-x!-to!-p(current!-modulus,wvec1,x!-to!-p);
    for i:=0:dx!-to!-p do putv(wvec1,i,getv(x!-to!-p,i));
    if dx!-to!-p#<1 then <<
        if dx!-to!-p#<0 then putv(wvec1,0,0);
        putv(wvec1,1,modular!-minus 1);
        dx!-to!-p:=1 >>
    else <<
      putv(wvec1,1,modular!-difference(getv(wvec1,1),1));
      if dx!-to!-p=1 and getv(wvec1,1)=0 then
         if getv(wvec1,0)=0 then dx!-to!-p:=-1
         else dx!-to!-p:=0 >>;
    if dx!-to!-p#<0 then
      lin!-f!-count:=copy!-vector(wvec2,dpoly,wvec1)
    else lin!-f!-count:=gcd!-in!-vector(wvec1,dx!-to!-p,
      wvec2,dpoly);
    linear!-factors:=mkvect lin!-f!-count;
    for i:=0:lin!-f!-count do
      putv(linear!-factors,i,getv(wvec1,i));
    dpoly:=quotfail!-in!-vector(poly!-vector,dpoly,
        linear!-factors,lin!-f!-count);
    return list(lin!-f!-count,linear!-factors,dx!-to!-p)
  end;

symbolic procedure make!-x!-to!-p(p,wvec1,x!-to!-p);
  begin scalar dx!-to!-p,dw1;
    if p#<dpoly then <<
       for i:=0:p#-1 do putv(x!-to!-p,i,0);
       putv(x!-to!-p,p,1);
       return p >>;
    dx!-to!-p:=make!-x!-to!-p(p/2,wvec1,x!-to!-p);
    dw1:=times!-in!-vector(x!-to!-p,dx!-to!-p,x!-to!-p,dx!-to!-p,wvec1);
    dw1:=remainder!-in!-vector(wvec1,dw1,
        poly!-vector,dpoly);
    if not(iremainder(p,2)=0) then <<
       for i:=dw1 step -1 until 0 do
          putv(wvec1,i#+1,getv(wvec1,i));
       putv(wvec1,0,0);
       dw1:=remainder!-in!-vector(wvec1,dw1#+1,
         poly!-vector,dpoly) >>;
    for i:=0:dw1 do putv(x!-to!-p,i,getv(wvec1,i));
    return dw1
  end;

symbolic procedure find!-linear!-factors!-mod!-p(p,n);
% P is a vector representing a polynomial of degree N which has
% only linear factors. Find all the factors and return a list of
% them;
  begin
    scalar root,var,w,vec1;
    if n#<1 then return nil;
    vec1:=mkvect 1;
    putv(vec1,1,1);
    root:=0;
    while (n#>1) and not (root #> current!-modulus) do <<
        w:=evaluate!-in!-vector(p,n,root);
        if w=0 then << %a factor has been found!!;
          if var=nil then
             var:=mksp(m!-image!-variable,1) . 1;
          w:=!*f2mod
            adjoin!-term(car var,cdr var,!*n2f modular!-minus root);
          known!-factors:=w . known!-factors;
          putv(vec1,0,modular!-minus root);
          n:=quotfail!-in!-vector(p,n,vec1,1) >>;
        root:=root#+1 >>;
    known!-factors:=
        vector!-to!-poly(p,n,m!-image!-variable) . known!-factors
  end;


%**********************************************************************;
% Berlekamp's algorithm part 1: find null space basis giving factor
% count;


symbolic procedure use!-berlekamp(x!-to!-p,dx!-to!-p,wvec1);
% Set up a basis for the set of remaining (nonlinear) factors
% using Berlekamp's algorithm;
  begin
    scalar berl!-m,berl!-m!-size,w,
           dcurrent,current!-power,wtime;
    berl!-m!-size:=dpoly#-1;
    berl!-m:=mkvect berl!-m!-size;
    for i:=0:berl!-m!-size do <<
      w:=mkvect berl!-m!-size;
      for j:=0:berl!-m!-size do putv(w,j,0); %initialize to zero;
      putv(berl!-m,i,w) >>;
% Note that column zero of the matrix (as used in the
% standard version of Berlekamp's algorithm) is not in fact
% needed and is not used here;
% I want to set up a matrix that has entries
%  x**p, x**(2*p), ... , x**((n-1)*p)
% as its columns,
% where n is the degree of poly-mod-p
% and all the entries are reduced mod poly-mod-p;
% Since I computed x**p I have taken out some linear factors,
% so reduce it further;
    dx!-to!-p:=remainder!-in!-vector(x!-to!-p,dx!-to!-p,
      poly!-vector,dpoly);
    dcurrent:=0;
    current!-power:=mkvect berl!-m!-size;
    putv(current!-power,0,1);
    for i:=1:berl!-m!-size do <<
       if current!-modulus#>dpoly then
         dcurrent:=times!-in!-vector(
            current!-power,dcurrent,
            x!-to!-p,dx!-to!-p,
            wvec1)
       else << % Multiply by shifting;
         for i:=0:current!-modulus#-1 do
           putv(wvec1,i,0);
         for i:=0:dcurrent do
           putv(wvec1,current!-modulus#+i,
             getv(current!-power,i));
         dcurrent:=dcurrent#+current!-modulus >>;
       dcurrent:=remainder!-in!-vector(
         wvec1,dcurrent,
         poly!-vector,dpoly);
       for j:=0:dcurrent do
          putv(getv(berl!-m,j),i,putv(current!-power,j,
            getv(wvec1,j)));
% also I need to subtract 1 from the diagonal of the matrix;
       putv(getv(berl!-m,i),i,
         modular!-difference(getv(getv(berl!-m,i),i),1)) >>;
    wtime:=time();
%   print!-m("Q matrix",berl!-m,berl!-m!-size);
    w := find!-null!-space(berl!-m,berl!-m!-size);
    trace!-time display!-time("Null space found in ",time()-wtime);
    return w
  end;


symbolic procedure find!-null!-space(berl!-m,berl!-m!-size);
% Diagonalize the matrix to find its rank and hence the number of
% factors the input polynomial had;
  begin scalar null!-space!-basis;
% find a basis for the null-space of the matrix;
    for i:=1:berl!-m!-size do
      null!-space!-basis:=
        clear!-column(i,null!-space!-basis,berl!-m,berl!-m!-size);
%    print!-m("Null vectored",berl!-m,berl!-m!-size);
    return
      tidy!-up!-null!-vectors(null!-space!-basis,berl!-m,berl!-m!-size)
  end;

symbolic procedure print!-m(m,berl!-m,berl!-m!-size);
 << printc m;
    for i:=0:berl!-m!-size do <<
      for j:=0:berl!-m!-size do <<
        prin2 getv(getv(berl!-m,i),j);
        ttab((4#*j)#+4) >>;
      terpri() >> >>;



symbolic procedure clear!-column(i,
                    null!-space!-basis,berl!-m,berl!-m!-size);
% Process column I of the matrix so that (if possible) it
% just has a '1' in row I and zeros elsewhere;
  begin
    scalar ii,w;
% I want to bring a non-zero pivot to the position (i,i)
% and then add multiples of row i to all other rows to make
% all but the i'th element of column i zero. First look for
% a suitable pivot;
    ii:=0;
search!-for!-pivot:
    if getv(getv(berl!-m,ii),i)=0 or
       ((ii#<i) and not(getv(getv(berl!-m,ii),ii)=0)) then
          if (ii:=ii#+1)#>berl!-m!-size then
              return (i . null!-space!-basis)
          else go to search!-for!-pivot;
% Here ii references a row containing a suitable pivot element for
% column i. Permute rows in the matrix so as to bring the pivot onto
% the diagonal;
    w:=getv(berl!-m,ii);
    putv(berl!-m,ii,getv(berl!-m,i));
    putv(berl!-m,i,w);
            % swop rows ii and i ;
    w:=modular!-minus modular!-reciprocal getv(getv(berl!-m,i),i);
% w = -1/pivot, and is used in zeroing out the rest of column i;
    for row:=0:berl!-m!-size do
      if row neq i then begin
         scalar r; %process one row;
         r:=getv(getv(berl!-m,row),i);
         if not(r=0) then <<
           r:=modular!-times(r,w);
   %that is now the multiple of row i that must be added to row ii;
           for col:=i:berl!-m!-size do
             putv(getv(berl!-m,row),col,
               modular!-plus(getv(getv(berl!-m,row),col),
               modular!-times(r,getv(getv(berl!-m,i),col)))) >>
         end;
    for col:=i:berl!-m!-size do
        putv(getv(berl!-m,i),col,
           modular!-times(getv(getv(berl!-m,i),col),w));
    return null!-space!-basis
  end;


symbolic procedure tidy!-up!-null!-vectors(null!-space!-basis,
                    berl!-m,berl!-m!-size);
  begin
    scalar row!-to!-use;
    row!-to!-use:=berl!-m!-size#+1;
    null!-space!-basis:=
      for each null!-vector in null!-space!-basis collect
        build!-null!-vector(null!-vector,
            getv(berl!-m,row!-to!-use:=row!-to!-use#-1),berl!-m);
    berl!-m:=nil; % Release the store for full matrix;
%    prin2 "Null vectors: ";
%    print null!-space!-basis;
    return null!-space!-basis
  end;

symbolic procedure build!-null!-vector(n,vec,berl!-m);
% At the end of the elimination process (the CLEAR-COLUMN loop)
% certain columns, indicated by the entries in NULL-SPACE-BASIS
% will be null vectors, save for the fact that they need a '1'
% inserted on the diagonal of the matrix. This procedure copies
% these null-vectors into some of the vectors that represented
% rows of the Berlekamp matrix;
  begin
%   putv(vec,0,0); % Not used later!!;
    for i:=1:n#-1 do
      putv(vec,i,getv(getv(berl!-m,i),n));
    putv(vec,n,1);
%   for i:=n#+1:berl!-m!-size do
%     putv(vec,i,0);
    return vec . n
  end;



%**********************************************************************;
% Berlekamp's algorithm part 2: retrieving the factors mod p;


symbolic procedure get!-factors!-mod!-p(n,p);
% given the modular info (for the nth image) generated by the
% previous half of Berlekamp's method we can reconstruct the
% actual factors mod p;
  begin scalar nth!-modular!-info,old!-m,wtime;
    nth!-modular!-info:=getv(modular!-info,n);
    old!-m:=set!-modulus p;
    wtime:=time();
    putv(modular!-info,n,
      convert!-null!-vectors!-to!-factors nth!-modular!-info);
    trace!-time display!-time("Factors constructed in ",time()-wtime);
    set!-modulus old!-m
  end;

symbolic procedure convert!-null!-vectors!-to!-factors m!-info;
% Using the null space found, complete the job
% of finding modular factors by taking gcd's of the
% modular input polynomial and variants on the
% null space generators;
  begin
    scalar number!-needed,factors,
      work!-vector1,dwork1,work!-vector2,dwork2,wtime;
    known!-factors:=nil;
    wtime:=time();
    find!-linear!-factors!-mod!-p(cdar m!-info,caar m!-info);
    trace!-time display!-time("Linear factors found in ",time()-wtime);
    dpoly:=caadr m!-info;
    poly!-vector:=cdadr m!-info;
    null!-space!-basis:=caddr m!-info;
    if dpoly=0 then return known!-factors; % All factors were linear;
    if null null!-space!-basis then
      return known!-factors:=
          vector!-to!-poly(poly!-vector,dpoly,m!-image!-variable) .
            known!-factors;
    number!-needed:=length null!-space!-basis;
% count showing how many more factors I need to find;
    work!-vector1:=mkvect dpoly;
    work!-vector2:=mkvect dpoly;
    factors:=list (poly!-vector . dpoly);
try!-next!-null:
    if null!-space!-basis=nil then
      errorf "RAN OUT OF NULL VECTORS TOO EARLY";
    wtime:=time();
    factors:=try!-all!-constants(factors,
        caar null!-space!-basis,cdar null!-space!-basis);
    trace!-time display!-time("All constants tried in ",time()-wtime);
    if number!-needed=0 then
       return known!-factors:=append!-new!-factors(factors,
            known!-factors);
    null!-space!-basis:=cdr null!-space!-basis;
    go to try!-next!-null
  end;


symbolic procedure try!-all!-constants(list!-of!-polys,v,dv);
% use gcd's of v, v+1, v+2, ... to try to split up the
% polynomials in the given list;
  begin
    scalar a,b,aa,s;
% aa is a list of factors that can not be improved using this v,
% b is a list that might be;
    aa:=nil; b:=list!-of!-polys;
    s:=0;
try!-next!-constant:
    putv(v,0,s); % Fix constant term of V to be S;
%    wtime:=time();
    a:=split!-further(b,v,dv);
%    trace!-time display!-time("Polys split further in ",time()-wtime);
    b:=cdr a; a:=car a;
    aa:=nconc(a,aa);
% Keep aa up to date as a list of polynomials that this poly
% v can not help further with;
    if b=nil then return aa; % no more progress possible here;
    if number!-needed=0 then return nconc(b,aa);
      % no more progress needed;
    s:=s#+1;
    if s#<current!-modulus then go to try!-next!-constant;
% Here I have run out of choices for the constant
% coefficient in v without splitting everything;
    return nconc(b,aa)
  end;

symbolic procedure split!-further(list!-of!-polys,v,dv);
% list-of-polys is a list of polynomials. try to split
% its members further by taking gcd's with the polynomial
% v. return (a . b) where the polys in a can not possibly
% be split using v+constant, but the polys in b might
% be;
    if null list!-of!-polys then nil . nil
    else begin
      scalar a,b,gg,q;
      a:=split!-further(cdr list!-of!-polys,v,dv);
      b:=cdr a; a:=car a;
      if number!-needed=0 then go to no!-split;
      % if all required factors have been found there is no need to
      % search further;
      dwork1:=copy!-vector(v,dv,work!-vector1);
      dwork2:=copy!-vector(caar list!-of!-polys,cdar list!-of!-polys,
        work!-vector2);
      dwork1:=gcd!-in!-vector(work!-vector1,dwork1,
         work!-vector2,dwork2);
      if dwork1=0 or dwork1=cdar list!-of!-polys then go to no!-split;
      dwork2:=copy!-vector(caar list!-of!-polys,cdar list!-of!-polys,
        work!-vector2);
      dwork2:=quotfail!-in!-vector(work!-vector2,dwork2,
        work!-vector1,dwork1);
% Here I have a splitting;
      gg:=mkvect dwork1;
      copy!-vector(work!-vector1,dwork1,gg);
      a:=((gg . dwork1) . a);
      copy!-vector(work!-vector2,dwork2,q:=mkvect dwork2);
      b:=((q . dwork2) . b);
      number!-needed:=number!-needed#-1;
      return (a . b);
   no!-split:
      return (a . ((car list!-of!-polys) . b))
    end;

symbolic procedure append!-new!-factors(a,b);
% Convert to REDUCE (rather than vector) form;
    if null a then b
    else
      vector!-to!-poly(caar a,cdar a,m!-image!-variable) .
        append!-new!-factors(cdr a,b);



carcheck safe!-flag; % Restore status quo;

endmodule;


module factrr;   % Full factorization of polynomials.

% Author: P. M. A. Moore, 1979.

fluid '(!*all!-contents
        !*exp
        !*ezgcd
        !*force!-prime
        !*gcd
        !*kernreverse
        !*mcd
        !*timings
        !*trfac
        base!-time
        current!-modulus
        dmode!*
        factor!-count
        factor!-level
        factor!-trace!-list
        gc!-base!-time
        last!-displayed!-gc!-time
        last!-displayed!-time
        m!-image!-variable
        modulus!/2
        polynomial!-to!-factor
        polyzero);

global '(!*ifactor);

symbolic procedure factoreval u;
% Factorize the polynomial in the car of u, returning the factors found.
% If cadr u exists then if it is a number, use it as a force prime.
% Otherwise, use cadr u as a fill object, and check to see if caddr u
% is now a force prime.
   begin scalar p,w,!*force!-prime,x,z,factor!-count;
      p := length u;
      if p<1 or p>3
        then rederr "FACTORIZE called with wrong number of arguments";
      p := !*q2f simp!* car u;
      if cdr u then
        <<w := cadr u;
          if fixp w then <<!*force!-prime := w; w := nil>>
           else if cddr u and fixp caddr u
            then !*force!-prime := caddr u;
          if !*force!-prime and not primep !*force!-prime
            then typerr(!*force!-prime,"prime")>>;
      x := if dmode!*
             then if z := get(dmode!*,'factorfn) then apply1(z,p)
                   else rederr
                         list("Factorization not supported over domain",
                                get(dmode!*,'dname))
           else factorf1(p,!*force!-prime);
      % Note that car x is expected to be a number.
      z:= (0 . car x) . nil;
      x := reversip!* cdr x;  % This puts factors in better order.
      factor!-count:=0;
      for each fff in x do
          for i:=1:cdr fff do
              z:=((factor!-count:=factor!-count+1) .
                  mk!*sq(car fff ./ 1)) . z;
      z := multiple!-result(z,w);
      if numberp z then return z     % old style input
       else if numberp cadr z and cadr z<0 and cddr z
        then z := car z . 
                      (- cadr z) . mk!*sq negsq simp caddr z . cdddr z;
      % make numerical coefficient positive.
      return if cadr z = 1 then car z . cddr z
              else if !*ifactor and numberp cadr z and fixp cadr z
               then car z .
                     append(pairlist2list reversip zfactor cadr z,
                            cddr z)
              else z
  end;

put('factorize,'psopfn,'factoreval);

symbolic procedure pairlist2list u;
   for each x in u conc nlist(car x,cdr x);


symbolic procedure factorf u;
% This is the entry to the factorizer that is to be used by programmers
% working at the symbolic level.  U is to be a standard form.  FACTORF
% hands back a list giving the factors of U.  The format of said list is
% described below in the comments with FACTORIZE!-FORM.  Entry to the
% factorizer at any level other than this is at the programmers own
% risk!! ;
   factorf1(u,nil);

symbolic procedure factorf1(u,!*force!-prime);
% This entry to the factorizer allows one to force
% the code to use some particular prime for its
% modular factorization. It is not for casual
% use;
  begin
    scalar factor!-level,base!-time,last!-displayed!-time,
      gc!-base!-time,last!-displayed!-gc!-time,current!-modulus,
      modulus!/2,expsave,!*ezgcd,!*gcd;
    if null !*mcd then rederr "Factorization invalid with MCD off";
    expsave := !*exp;
    !*exp := !*gcd := t; % This code will not work otherwise;
    !*ezgcd := t;
    if null expsave then u := !*q2f resimp !*f2q u;
    set!-time();
    factor!-level := 0;
    u := factorize!-form u;
    !*exp := expsave;
    return u
  end;
 
symbolic procedure factorize!-form p;
% input:
% p is a reduce standard form that is to be factorized
% over the integers
% result:      (nc . l)
%  where nc is numeric (may be just 1)
%  and l is list of the form:
%    ((p1 . x1) (p2 . x2) .. (pn . xn))
% where p<i> are standard forms and x<i> are integers,
% and p= product<i> p<i>**x<i>;
%
% method:
% (a) reorder polynomial to make the variable of lowest maximum
% degree the main one and the rest ordered similarly;
% (b) use contents and primitive parts to split p up as far as possible
% (c) use square-free decomposition to continue the process
% (c.1) detect & perform special processing on cyclotomic polynomials
% (d) use modular-based method to find factors over integers;
  begin scalar new!-korder,old!-korder;
    new!-korder:=kernord(p,polyzero);
    if !*kernreverse then new!-korder:=reverse new!-korder;
    old!-korder:=setkorder new!-korder;
    p:=reorder p; % Make var of lowest degree the main one;
    p:=factorize!-form1(p,new!-korder);
    setkorder old!-korder;
    p := (car p . for each w in cdr p collect
           (reorder car w . cdr w));
    return p
  end;

symbolic procedure factorize!-form1(p,given!-korder);
% input:
% p is a reduce standard form that is to be factorized
% over the integers
% given-korder is a list of kernels in the order of importance
% (ie when finding leading terms etc. we use this list)
% See FACTORIZE-FORM above;
  if domainp p then (p . nil)
  else begin scalar m!-image!-variable,var!-list,
                    polynomial!-to!-factor,n;
    if !*all!-contents then var!-list:=given!-korder
    else <<
      m!-image!-variable:=car given!-korder;
      var!-list:=list m!-image!-variable >>;
    return (lambda factor!-level;
     << factor!-trace <<
          prin2!* "FACTOR : "; printsf p;
          prin2!* "Chosen main variable is ";
          printvar m!-image!-variable >>;
        polynomial!-to!-factor:=p;
        n:=numeric!-content p;
        p:=quotf(p,n);
        if poly!-minusp p then <<
          p:=negf p;
          n:=-n >>;
        factor!-trace <<
          prin2!* "Numeric content = ";
          printsf n >>;
        p:=factorize!-by!-contents(p,var!-list);
        p:=n . sort!-factors p;
        factor!-trace <<
          terpri(); terpri();
          printstr "Final result is:";  fac!-printfactors p >>;
        p >>)
        (factor!-level+1)
  end;

symbolic procedure factorize!-form!-recursion p;
% this is essentially the same as FACTORIZE!-FORM except that
% we must be careful of stray minus signs due to a possible
% reordering in the recursive factoring;
  begin scalar s,n,x,res,new!-korder,old!-korder;
    new!-korder:=kernord(p,polyzero);
    if !*kernreverse then new!-korder:=reverse new!-korder;
    old!-korder:=setkorder new!-korder;
    p:=reorder p; % Make var of lowest degree the main one;
    x:=factorize!-form1(p,new!-korder);
    setkorder old!-korder;
    n := car x;
    x := for each p in cdr x collect (reorder car p . cdr p);
    if minusp n then << s:=-1; n:=-n >> else s:=1;
    res:=for each ff in x collect
      if poly!-minusp car ff then <<
        s:=s*((-1)**cdr ff);
        (negf car ff . cdr ff) >>
      else ff;
    if minusp s then errorf list(
      "Stray minus sign in recursive factorisation:",x);
    return (n . res)
  end;

symbolic procedure sort!-factors l;
%sort factors as found into some sort of standard order. The order
%used here is more or less random, but will be self-consistent;
    sort(l,function orderfactors);


% ***** Contents and primitive parts as applied to factorization *****

symbolic procedure factorize!-by!-contents(p,v);
%use contents wrt variables in list v to split the
%polynomial p. return a list of factors;
% specification is that on entry p *must* be positive;
    if domainp p then
      errorf list("FACTORIZE-BY-CONTENTS HANDED DOMAIN ELT:",p)
    else if null v then square!.free!.factorize p
    else begin scalar c,w,l,wtime;
        w:=contents!-with!-respect!-to(p,car v);
% contents!-with!-respect!-to returns a pair (g . c) where
% if g=nil the content is just c, otherwise g is a power
% [ x ** n ] and g*c is the content;
        if not null car w then <<
% here a power of v divides p;
            l:=(!*k2f caar w . cdar w) . nil;
            p:=quotfail(p,!*p2f car w);
            if p=1 then return l
            else if domainp p then
                errorf "P SHOULD NOT BE CONSTANT HERE" >>;
        c:=cdr w;
        if c=1 then << %no progress here;
          if null l then
            factor!-trace << prin2!* "Polynomial is primitive wrt ";
              prinvar car v; terpri!*(nil) >>
          else factor!-trace << printstr "Content is: ";
              fac!-printfactors(1 . l) >>;
          return if !*all!-contents then
            append(factorize!-by!-contents(p,cdr v),l)
          else append(square!.free!.factorize p,l) >>;
        p:=quotfail(p,c); %primitive part;
% p is now primitive, so if it is not a real polynomial it
% must be a unit. since input was +ve it had better be +1 !! ;
        if p=-1 then
          errorf "NEGATIVE PRIMITIVE PART IN FACTORIZE-BY-CONTENTS";
        trace!-time printc "Factoring the content:";
        wtime:=time();
        l:=append(cdr1 factorize!-form!-recursion c,l);
        trace!-time display!-time("Content factored in ",
          time()-wtime);
        factor!-trace <<
          prin2!* "Content wrt "; prinvar car v; prin2!* " is: ";
          printsf comfac!-to!-poly w;
          printstr "Factors of content are: ";
          fac!-printfactors(1 . l) >>;
        if p=1 then return l
        else if !*all!-contents then
            return append(factorize!-by!-contents(p,cdr v),l)
        else return append(square!.free!.factorize p,l)
    end;

symbolic procedure cdr1 a;
  if car a=1 then cdr a
  else errorf list("NUMERIC CONTENT NOT EXTRACTED:",car a);

endmodule;


module facuni;

% Authors: A. C. Norman and P. M. A. Moore, 1979;

fluid '(!*force!-prime
        !*trfac
        alphalist
        bad!-case
        best!-factor!-count
        best!-known!-factors
        best!-modulus
        best!-set!-pointer
        chosen!-prime
        factor!-level
        factor!-trace!-list
        forbidden!-primes
        hensel!-growth!-size
        input!-leading!-coefficient
        input!-polynomial
        irreducible
        known!-factors
        m!-image!-variable
        modular!-info
        no!-of!-best!-primes
        no!-of!-random!-primes
        non!-monic
        null!-space!-basis
        number!-of!-factors
        one!-complete!-deg!-analysis!-done
        poly!-mod!-p
        previous!-degree!-map
        reduction!-count
        split!-list
        target!-factor!-count
        univariate!-factors
        univariate!-input!-poly
        valid!-primes);


symbolic procedure univariate!-factorize poly;
% input poly a primitive square-free univariate polynomial at least
% quadratic and with +ve lc.  output is a list of the factors of poly
% over the integers ;
  if testx!*!*n!+1 poly then
    factorizex!*!*n!+1(m!-image!-variable,ldeg poly,1)
  else if testx!*!*n!-1 poly then
    factorizex!*!*n!-1(m!-image!-variable,ldeg poly,1)
  else univariate!-factorize1 poly;

symbolic procedure univariate!-factorize1 poly;
  begin scalar
    valid!-primes,univariate!-input!-poly,best!-set!-pointer,
    number!-of!-factors,irreducible,forbidden!-primes,
    no!-of!-best!-primes,no!-of!-random!-primes,bad!-case,
    target!-factor!-count,modular!-info,univariate!-factors,
    hensel!-growth!-size,alphalist,previous!-degree!-map,
    one!-complete!-deg!-analysis!-done,reduction!-count,
    multivariate!-input!-poly;
%note that this code works by using a local database of
%fluid variables that are updated by the subroutines directly
%called here. this allows for the relativly complicated
%interaction between flow of data and control that occurs in
%the factorization algorithm;
    factor!-trace <<
      prin2!* "Univariate polynomial="; printsf poly;
      printstr
         "The polynomial is univariate, primitive and square-free";
      printstr "so we can treat it slightly more specifically. We";
      printstr "factorise mod several primes,then pick the best one";
      printstr "to use in the Hensel construction." >>;
    initialize!-univariate!-fluids poly;
            % set up the fluids to start things off;
tryagain:
    get!-some!-random!-primes();
    choose!-the!-best!-prime();
      if irreducible then <<
        univariate!-factors:=list univariate!-input!-poly;
        goto exit >>
      else if bad!-case then <<
        bad!-case:=nil; goto tryagain >>;
    reconstruct!-factors!-over!-integers();
      if irreducible then <<
        univariate!-factors:=list univariate!-input!-poly;
        goto exit >>;
exit:
    factor!-trace <<
      printstr "The univariate factors are:";
      for each ff in univariate!-factors do printsf ff >>;
    return univariate!-factors
   end;


%**********************************************************************
% univariate factorization part 1. initialization and setting fluids;


symbolic procedure initialize!-univariate!-fluids u;
% Set up the fluids to be used in factoring primitive poly;
  begin
    if !*force!-prime then <<
      no!-of!-random!-primes:=1;
      no!-of!-best!-primes:=1 >>
    else <<
      no!-of!-random!-primes:=5;
            % we generate this many modular images and calculate
            % their factor counts;
      no!-of!-best!-primes:=3;
            % we find the modular factors of this many;
      >>;
    univariate!-input!-poly:=u;
    target!-factor!-count:=ldeg u
  end;


%**********************************************************************;
% univariate factorization part 2. creating modular images and picking
%  the best one;


symbolic procedure get!-some!-random!-primes();
% here we create a number of random primes to reduce the input mod p;
  begin scalar chosen!-prime,poly!-mod!-p,i;
    valid!-primes:=mkvect no!-of!-random!-primes;
    i:=0;
    while i < no!-of!-random!-primes do <<
      poly!-mod!-p:=
        find!-a!-valid!-prime(lc univariate!-input!-poly,
                    univariate!-input!-poly,nil);
      if not(poly!-mod!-p='not!-square!-free) then <<
        i:=iadd1 i;
        putv(valid!-primes,i,chosen!-prime . poly!-mod!-p);
        forbidden!-primes:=chosen!-prime . forbidden!-primes
        >>
      >>
  end;

symbolic procedure choose!-the!-best!-prime();
% given several random primes we now choose the best by factoring
% the poly mod its chosen prime and taking one with the
% lowest factor count as the best for hensel growth;
  begin scalar split!-list,poly!-mod!-p,null!-space!-basis,
               known!-factors,w,n;
    modular!-info:=mkvect no!-of!-random!-primes;
    for i:=1:no!-of!-random!-primes do <<
      w:=getv(valid!-primes,i);
      get!-factor!-count!-mod!-p(i,cdr w,car w,nil) >>;
    split!-list:=sort(split!-list,function lessppair);
            % this now contains a list of pairs (m . n) where
            % m is the no: of factors in set no: n. the list
            % is sorted with best split (smallest m) first;
    if caar split!-list = 1 then <<
      irreducible:=t; return nil >>;
    w:=split!-list;
    for i:=1:no!-of!-best!-primes do <<
      n:=cdar w;
      get!-factors!-mod!-p(n,car getv(valid!-primes,n));
      w:=cdr w >>;
            % pick the best few of these and find out their
            % factors mod p;
    split!-list:=delete(w,split!-list);
            % throw away the other sets;
    check!-degree!-sets(no!-of!-best!-primes,nil);
            % the best set is pointed at by best!-set!-pointer;
    one!-complete!-deg!-analysis!-done:=t;
    factor!-trace <<
      w:=getv(valid!-primes,best!-set!-pointer);
      prin2!* "The chosen prime is "; printstr car w;
      prin2!* "The polynomial mod "; prin2!* car w;
      printstr ", made monic, is:";
      printsf cdr w;
      printstr "and the factors of this modular polynomial are:";
      for each x in getv(modular!-info,best!-set!-pointer)
         do printsf x;
      >>
  end;



%**********************************************************************;
% univariate factorization part 3. reconstruction of the
% chosen image over the integers;


symbolic procedure reconstruct!-factors!-over!-integers();
% the hensel construction from modular case to univariate
% over the integers;
  begin scalar best!-modulus,best!-factor!-count,input!-polynomial,
    input!-leading!-coefficient,best!-known!-factors,s;
    s:=getv(valid!-primes,best!-set!-pointer);
    best!-known!-factors:=getv(modular!-info,best!-set!-pointer);
    input!-leading!-coefficient:=lc univariate!-input!-poly;
    best!-modulus:=car s;
    best!-factor!-count:=length best!-known!-factors;
    input!-polynomial:=univariate!-input!-poly;
    univariate!-factors:=reconstruct!.over!.integers();
    if irreducible then return t;
    number!-of!-factors:=length univariate!-factors;
    if number!-of!-factors=1 then return irreducible:=t
  end;


symbolic procedure reconstruct!.over!.integers();
  begin scalar w,lclist,non!-monic;
    set!-modulus best!-modulus;
    for i:=1:best!-factor!-count do
      lclist:=input!-leading!-coefficient . lclist;
    if not (input!-leading!-coefficient=1) then <<
      best!-known!-factors:=
        for each ff in best!-known!-factors collect
          multf(input!-leading!-coefficient,!*mod2f ff);
      non!-monic:=t;
      factor!-trace <<
        printstr
           "(a) Now the polynomial is not monic so we multiply each";
        printstr
           "of the modular factors, f(i), by the absolute value of";
        prin2!* "the leading coefficient: ";
        prin2!* input!-leading!-coefficient; printstr '!.;
        printstr "To bring the polynomial into agreement with this, we";
        prin2!* "multiply it by ";
        if best!-factor!-count > 2 then
          << prin2!* input!-leading!-coefficient; prin2!* "**";
            printstr isub1 best!-factor!-count >>
        else printstr input!-leading!-coefficient >> >>;
    w:=uhensel!.extend(input!-polynomial,
      best!-known!-factors,lclist,best!-modulus);
    if irreducible then return t;
    if car w ='ok then return cdr w
    else errorf w
  end;


% Now some special treatment for cyclotomic polynomials;

symbolic procedure testx!*!*n!+1 u;
  not domainp u and (
    lc u=1 and
    red u = 1);


symbolic procedure testx!*!*n!-1 u;
  not domainp u and (
    lc u=1 and
    red u = -1);


symbolic procedure factorizex!*!*n!+1(var,degree,vorder);
% Deliver factors of (VAR**VORDER)**DEGREE+1 given that it is
% appropriate to treat VAR**VORDER as a kernel;
  if evenp degree then factorizex!*!*n!+1(var,degree/2,2*vorder)
  else begin
    scalar w;
    w := factorizex!*!*n!-1(var,degree,vorder);
    w := negf car w . cdr w;
    return for each p in w collect negate!-variable(var,2*vorder,p)
  end;

symbolic procedure negate!-variable(var,vorder,p);
% VAR**(VORDER/2) -> -VAR**(VORDER/2) in the polynomial P;
  if domainp p then p
  else if mvar p=var then
    if remainder(ldeg p,vorder)=0 then
            lt p .+ negate!-variable(var,vorder,red p)
    else (lpow p .* negf lc p) .+ negate!-variable(var,vorder,red p)
  else (lpow p .* negate!-variable(var,vorder,lc p)) .+
        negate!-variable(var,vorder,red p);


symbolic procedure integer!-factors n;
% Return integer factors of N, with attached multiplicities. Assumes
% that N is fairly small;
  begin
    scalar l,q,m,w;
% L is list of results generated so far, Q is current test divisor,
% and M is associated multiplicity;
    if n=1 then return '((1 . 1));
    q := 2; m := 0;
    % Test divide by 2,3,5,7,9,11,13,...
top:
    w := divide(n,q);
    while cdr w=0 do << n := car w; w := divide(n,q); m := m+1 >>;
    if not m=0 then l := (q . m) . l;
    if q>car w then <<
      if not n=1 then l := (n . 1) . l;
      return reversewoc l >>;
%   q := ilogor(1,iadd1 q);
    q := iadd1 q;
    if q #> 3 then q := iadd1 q;
    m := 0;
    go to top
  end;


symbolic procedure factored!-divisors fl;
% FL is an association list of primes and exponents. Return a list
% of all subsets of this list, i.e. of numbers dividing the
% original integer. Exclude '1' from the list;
  if null fl then nil
  else begin
    scalar l,w;
    w := factored!-divisors cdr fl;
    l := w;
    for i := 1:cdar fl do <<
      l := list (caar fl . i) . l;
      for each p in w do
        l := ((caar fl . i) . p) . l >>;
    return l
  end;

symbolic procedure factorizex!*!*n!-1(var,degree,vorder);
  if evenp degree then append(factorizex!*!*n!+1(var,degree/2,vorder),
                              factorizex!*!*n!-1(var,degree/2,vorder))
  else if degree=1 then list((mksp(var,vorder) .* 1) .+ (-1))
  else begin
    scalar facdeg;
    facdeg := '((1 . 1)) . factored!-divisors integer!-factors degree;
    return for each fl in facdeg
       collect cyclotomic!-polynomial(var,fl,vorder)
  end;

symbolic procedure cyclotomic!-polynomial(var,fl,vorder);
% Create Psi<degree>(var**order)
% where degree is given by the association list of primes and
% multiplicities FL;
  if not cdar fl=1 then
    cyclotomic!-polynomial(var,(caar fl . sub1 cdar fl) . cdr fl,
                           vorder*caar fl)
  else if cdr fl=nil then
     if caar fl=1 then (mksp(var,vorder) .* 1) .+ (-1)
     else quotfail((mksp(var,vorder*caar fl) .* 1) .+ (-1),
                   (mksp(var,vorder) .* 1) .+ (-1))
  else quotfail(cyclotomic!-polynomial(var,cdr fl,vorder*caar fl),
                cyclotomic!-polynomial(var,cdr fl,vorder));



endmodule;


module imageset;

% Authors: A. C. Norman and P. M. A. Moore, 1979;

fluid '(!*force!-prime
        !*force!-zero!-set
        !*timings
        !*trfac
        bad!-case
        chosen!-prime
        current!-modulus
        f!-numvec
        factor!-level
        factor!-trace!-list
        factor!-x
        factored!-lc
        forbidden!-primes
        forbidden!-sets
        image!-content
        image!-lc
        image!-mod!-p
        image!-poly
        image!-set
        image!-set!-modulus
        kord!*
        m!-image!-variable
        modulus!/2
        multivariate!-input!-poly
        no!-of!-primes!-to!-try
        othervars
        polyzero
        save!-zset
        usable!-set!-found
        vars!-to!-kill
        zero!-set!-tried
        zerovarset
        zset);


%*******************************************************************;
%
%      this section deals with the image sets used in
%      factorising multivariate polynomials according
%      to wang's theories.
%       ref:  math. comp. vol.32 no.144 oct 1978 pp 1217-1220
%        'an improved multivariate polynomial factoring algorithm'
%
%*******************************************************************;


%*******************************************************************;
%    first we have routines for generating the sets
%*******************************************************************;


symbolic procedure generate!-an!-image!-set!-with!-prime
                      good!-set!-needed;
% given a multivariate poly (in a fluid) we generate an image set
% to make it univariate and also a random prime to use in the
% modular factorization. these numbers are random except that
% we will not allow anything in forbidden!-sets or forbidden!-primes;
  begin scalar currently!-forbidden!-sets,u,wtime;
    u:=multivariate!-input!-poly;
            % a bit of a handful to type otherwise!!!!   ;
    image!-set:=nil;
    currently!-forbidden!-sets:=forbidden!-sets;
tryanotherset:
    if image!-set then
      currently!-forbidden!-sets:=image!-set .
                                currently!-forbidden!-sets;
    wtime:=time();
    image!-set:=get!-new!-set currently!-forbidden!-sets;
%           princ "Trying imageset= ";
%           printc image!-set;
    trace!-time <<
      display!-time("    New image set found in ",time()-wtime);
      wtime:=time() >>;
    image!-lc:=make!-image!-lc!-list(lc u,image!-set);
            % list of image lc's wrt different variables in IMAGE-SET;
%    princ "Image set to try is:";% printc image!-set;
%    prin2!* "L.C. of poly is:";% printsf lc u;
%    printc "Image l.c.s with variables substituted on order:";
%    for each imlc in image!-lc do printsf imlc;
    trace!-time
      display!-time("    Image of lc made in ",time()-wtime);
    if (caar image!-lc)=0 then goto tryanotherset;
    wtime:=time();
    image!-poly:=make!-image(u,image!-set);
    trace!-time <<
      display!-time("    Image poly made in ",time()-wtime);
      wtime:=time() >>;
    image!-content:=get!.content image!-poly;
            % note: the content contains the image variable if it
            % is a factor of the image poly;
    trace!-time
      display!-time("    Content found in ",time()-wtime);
    image!-poly:=quotfail(image!-poly,image!-content);
            % make sure the image polynomial is primitive which includes
            % making the leading coefft positive (-ve content if
            % necessary).
            % If the image polynomial was of the form k*v^2 where v is
            % the image variable then GET.CONTENT will have taken out
            % one v and the k leaving the polynomial v here.
            % Divisibility by v here thus indicates that the image was
            % not square free, and so we will not be able to find a
            % sensible prime to use.
    if not didntgo quotf(image!-poly,!*k2f m!-image!-variable) then
        go to tryanotherset;
    wtime:=time();
    image!-mod!-p:=find!-a!-valid!-prime(image!-lc,image!-poly,
      not numberp image!-content);
    if image!-mod!-p='not!-square!-free then goto tryanotherset;
    trace!-time <<
      display!-time("    Prime and image mod p found in ",time()-wtime);
      wtime:=time() >>;
    if factored!-lc then
      if f!-numvec:=unique!-f!-nos(factored!-lc,image!-content,
          image!-set) then <<
        usable!-set!-found:=t;
        trace!-time
          display!-time("    Nos for lc found in ",time()-wtime) >>
      else <<
        trace!-time display!-time("    Nos for lc failed in ",
            time()-wtime);
        if (not usable!-set!-found) and good!-set!-needed then
          goto tryanotherset >>
  end;


symbolic procedure get!-new!-set forbidden!-s;
% associate each variable in vars-to-kill with a random no. mod
% image-set-modulus. If the boolean tagged with a variable is true then
% a value of 1 or 0 is no good and so rejected, however all other
% variables can take these values so they are tried exhaustively before
% using truly random values. sets in forbidden!-s not allowed;
  begin scalar old!.m,alist,n,nextzset,w;
    if zero!-set!-tried then <<
      if !*force!-zero!-set then
        errorf "Zero set tried - possibly it was invalid";
      image!-set!-modulus:=iadd1 image!-set!-modulus;
      old!.m:=set!-modulus image!-set!-modulus;
      alist:=for each v in vars!-to!-kill collect
      << n:=modular!-number next!-random!-number();
         if n>modulus!/2 then n:=n-current!-modulus;
         if cdr v then <<
           while n=0
              or n=1
              or (n = (isub1 current!-modulus)) do
             n:=modular!-number next!-random!-number();
           if n>modulus!/2 then n:=n-current!-modulus >>;
         car v . n >> >>
    else <<
      old!.m:=set!-modulus image!-set!-modulus;
      nextzset:=car zset;
      alist:=for each zv in zerovarset collect <<
        w:=zv . car nextzset;
        nextzset:=cdr nextzset;
        w >>;
      if othervars then alist:=
        append(alist,for each v in othervars collect <<
          n:=modular!-number next!-random!-number();
          while n=0
             or n=1
             or (n = (isub1 current!-modulus)) do
            n:=modular!-number next!-random!-number();
          if n>modulus!/2 then n:=n-current!-modulus;
          v . n >>);
      if null(zset:=cdr zset) then
        if null save!-zset then zero!-set!-tried:=t
        else zset:=make!-next!-zset save!-zset;
      alist:=for each v in cdr kord!* collect atsoc(v,alist);
            % Puts the variables in alist in the right order;
      >>;
    set!-modulus old!.m;
    return if member(alist,forbidden!-s) then
        get!-new!-set forbidden!-s
      else alist
  end;


%**********************************************************************
% now given an image/univariate polynomial find a suitable random prime;


symbolic procedure find!-a!-valid!-prime(lc!-u,u,factor!-x);
% finds a suitable random prime for reducing a poly mod p.
% u is the image/univariate poly. we are not allowed to use
% any of the primes in forbidden!-primes (fluid).
% lc!-u is either numeric or (in the multivariate case) a list of
% images of the lc;
  begin scalar currently!-forbidden!-primes,res,prime!-count,v,w;
    if factor!-x then u:=multf(u,v:=!*k2f m!-image!-variable);
    chosen!-prime:=nil;
    currently!-forbidden!-primes:=forbidden!-primes;
    prime!-count:=1;
tryanotherprime:
    if chosen!-prime then
      currently!-forbidden!-primes:=chosen!-prime .
                                 currently!-forbidden!-primes;
    chosen!-prime:=get!-new!-prime currently!-forbidden!-primes;
    set!-modulus chosen!-prime;
    if not atom lc!-u then <<
      w:=lc!-u;
      while w and
           ((domainp caar w and not(modular!-number caar w = 0))
        or not (domainp caar w or
                modular!-number l!-numeric!-c(caar w,cdar w)=0)) do
        w:=cdr w;
      if w then goto tryanotherprime >>
    else if modular!-number lc!-u=0 then goto tryanotherprime;
    res:=monic!-mod!-p reduce!-mod!-p u;
    if not square!-free!-mod!-p res then
      if multivariate!-input!-poly
         and (prime!-count:=prime!-count+1)>no!-of!-primes!-to!-try
        then <<no!-of!-primes!-to!-try := no!-of!-primes!-to!-try+1;
               res:='not!-square!-free>>
      else goto tryanotherprime;
    if factor!-x and not(res='not!-square!-free) then
      res:=quotfail!-mod!-p(res,!*f2mod v);
    return res
 end;

symbolic procedure get!-new!-prime forbidden!-p;
% get a small prime that is not in the list forbidden!-p;
% we pick one of the first 10 primes if we can;
  if !*force!-prime then !*force!-prime
  else begin scalar p,primes!-done;
    for each pp in forbidden!-p do
      if pp<32 then primes!-done:=pp.primes!-done;
tryagain:
    if null(p:=random!-teeny!-prime primes!-done) then <<
      p:=random!-small!-prime();
      primes!-done:='all >>
    else primes!-done:=p . primes!-done;
    if member(p,forbidden!-p) then goto tryagain;
    return p
  end;

%***********************************************************************
% find the numbers associated with each factor of the leading
% coefficient of our multivariate polynomial. this will help
% to distribute the leading coefficient later.;



symbolic procedure unique!-f!-nos(v,cont!.u0,im!.set);
% given an image set (im!.set), this finds the numbers associated with
% each factor in v subject to wang's condition (2) on the image set.
% this is an implementation of his algorithm n. if the condition
% is met the result is a vector containing the images of each factor
% in v, otherwise the result is nil;
  begin scalar d,k,q,r,lc!.image!.vec;
            % v's integer factor is at the front:  ;
    k:=length cdr v;
            % no. of non-trivial factors of v;
    if not numberp cont!.u0 then cont!.u0:=lc cont!.u0;
    putv(d:=mkvect k,0,abs(cont!.u0 * car v));
            % d will contain the special numbers to be used in the
            % loop below;
    putv(lc!.image!.vec:=mkvect k,0,abs(cont!.u0 * car v));
            % vector for result with 0th entry filled in;
    v:=cdr v;
            % throw away integer factor of v;
            % k is no. of non-trivial factors (say f(i)) in v;
            % d will contain the nos. associated with each f(i);
            % v is now a list of the f(i) (and their multiplicities);
    for i:=1:k do
    << q:=abs make!-image(caar v,im!.set);
       putv(lc!.image!.vec,i,q);
       v:=cdr v;
       for j:=isub1 i step -1 until 0 do
       << r:=getv(d,j);
          while not onep r do
          << r:=gcd(r,q); q:=q/r >>;
          if onep q then <<lc!.image!.vec:=nil; j := -1>>
            % if q=1 here then we have failed the condition so exit;
          >>;
      if null lc!.image!.vec then i := k+1 else putv(d,i,q);
            % else q is the ith number we want;
   >>;
    return lc!.image!.vec
  end;

symbolic procedure get!.content u;
% u is a univariate square free poly. gets the content of u (=integer);
% if lc u is negative then the minus sign is pulled out as well;
% nb. the content includes the variable if it is a factor of u;
  begin scalar c;
    c:=if poly!-minusp u then -(numeric!-content u)
       else numeric!-content u;
    if not didntgo quotf(u,!*k2f m!-image!-variable) then
      c:=adjoin!-term(mksp(m!-image!-variable,1),c,polyzero);
    return c
  end;


%********************************************************************;
%    finally we have the routines that use the numbers generated
%    by unique.f.nos to determine the true leading coeffts in
%    the multivariate factorization we are doing and which image
%    factors will grow up to have which true leading coefft.
%********************************************************************;




symbolic procedure distribute!.lc(r,im!.factors,s,v);
% v is the factored lc of a poly, say u, whose image factors (r of
% them) are in the vector im.factors. s is a list containing the
% image information including the image set, the image poly etc.
%  this uses wang's ideas for distributing the factors in v over
% those in im.factors. result is (delta . vector of the lc's of
% the full factors of u) , where delta is the remaining integer part
% of the lc that we have been unable to distribute.             ;
  (lambda factor!-level;
  begin scalar k,delta,div!.count,q,uf,i,d,max!.mult,f,numvec,
               dvec,wvec,dtwid,w;
    delta:=get!-image!-content s;
            % the content of the u image poly;
    dist!.lc!.msg1(delta,im!.factors,r,s,v);
    v:=cdr v;
            % we are not interested in the numeric factors of v;
    k:=length v;
            % number of things to distribute;
    numvec:=get!-f!-numvec s;
            % nos. associated with factors in v;
    dvec:=mkvect r;
    wvec:=mkvect r;
    for j:=1:r do <<
      putv(dvec,j,1);
      putv(wvec,j,delta*lc getv(im!.factors,j)) >>;
            % result lc's will go into dvec which we initialize to 1's;
            % wvec is a work vector that we use in the division process
            % below;
    v:=reverse v;
    for j:=k step -1 until 1 do
    << % (for each factor in v, call it f(j) );
      f:=caar v;
            % f(j) itself;
      max!.mult:=cdar v;
            % multiplicity of f(j) in v (=lc u);
      v:=cdr v;
      d:=getv(numvec,j);
            % number associated with f(j);
      i:=1; % we trial divide d into lc of each image
            % factor starting with 1st;
      div!.count:=0;
            % no. of d's that have been distributed;
      factor!-trace <<
        prin2!* "f("; prin2!* j; prin2!* ")= "; printsf f;
        prin2!* "There are "; prin2!* max!.mult;
        printstr " of these in the leading coefficient.";
        prin2!* "The absolute value of the image of f("; prin2!* j;
        prin2!* ")= "; printstr d >>;
      while ilessp(div!.count,max!.mult)
        and not igreaterp(i,r) do
      << q:=divide(getv(wvec,i),d);
            % first trial division;
        factor!-trace <<
          prin2!* "  Trial divide into ";
          prin2!* getv(wvec,i); printstr " :" >>;
        while (zerop cdr q) and ilessp(div!.count,max!.mult) do
        << putv(dvec,i,multf(getv(dvec,i),f));
            % f(j) belongs in lc of ith factor;
          factor!-trace <<
            prin2!* "    It goes so an f("; prin2!* j;
            prin2!* ") belongs in ";
            printsf getv(im!.factors,i);
            printstr "  Try again..." >>;
          div!.count:=iadd1 div!.count;
            % another d done;
          putv(wvec,i,car q);
            % save the quotient for next factor to distribute;
          q:=divide(car q,d);
            % try again;
        >>;
        i:=iadd1 i;
            % as many d's as possible have gone into that
            % factor so now try next factor;
        factor!-trace
           <<printstr "    no good so try another factor ..." >>>>;
            % at this point the whole of f(j) should have been
            % distributed by dividing d the maximum no. of times
            % (= max!.mult), otherwise we have an extraneous factor;
      if ilessp(div!.count,max!.mult) then
        <<bad!-case:=t; div!.count := max!.mult>>
    >>;
    if bad!-case then return;
    dist!.lc!.msg2(dvec,im!.factors,r);
    if onep delta then
    << for j:=1:r do <<
         w:=lc getv(im!.factors,j) /
          evaluate!-in!-order(getv(dvec,j),get!-image!-set s);
         if w<0 then begin
           scalar oldpoly;
           delta:= -delta;
           oldpoly:=getv(im!.factors,j);
           putv(im!.factors,j,negf oldpoly);
            % to keep the leading coefficients positive we negate the
            % image factors when necessary;
           multiply!-alphas(-1,oldpoly,getv(im!.factors,j));
            % remember to fix the alphas as well;
         end;
         putv(dvec,j,multf(abs w,getv(dvec,j))) >>;
      dist!.lc!.msg3(dvec,im!.factors,r);
      return (delta . dvec)
    >>;
      % if delta=1 then we know the true lc's exactly so put in their
      % integer contents and return with result.
      % otherwise try spreading delta out over the factors:      ;
    dist!.lc!.msg4 delta;
    for j:=1:r do
    << dtwid:=evaluate!-in!-order(getv(dvec,j),get!-image!-set s);
       uf:=getv(im!.factors,j);
       d:=gcddd(lc uf,dtwid);
       putv(dvec,j,multf(lc uf/d,getv(dvec,j)));
       putv(im!.factors,j,multf(dtwid/d,uf));
            % have to fiddle the image factors by an integer multiple;
       multiply!-alphas!-recip(dtwid/d,uf,getv(im!.factors,j));
            % fix the alphas;
       delta:=delta/(dtwid/d)
    >>;
    % now we've done all we can to distribute delta so we return with
    % what's left:                                    ;
    if delta<=0 then
      errorf list("FINAL DELTA IS -VE IN DISTRIBUTE!.LC",delta);
    factor!-trace <<
      printstr "     Finally we have:";
      for j:=1:r do <<
        prinsf getv(im!.factors,j);
        prin2!* " with l.c. ";
        printsf getv(dvec,j) >> >>;
    return (delta . dvec)
  end) (factor!-level * 10);

symbolic procedure dist!.lc!.msg1(delta,im!.factors,r,s,v);
    factor!-trace <<
      terpri(); terpri();
      printstr "We have a polynomial whose image factors (call";
      printstr "them the IM-factors) are:";
      prin2!* delta; printstr " (= numeric content, delta)";
      printvec(" f(",r,")= ",im!.factors);
      prin2!* "  wrt the image set: ";
      for each x in get!-image!-set s do <<
        prinvar car x; prin2!* "="; prin2!* cdr x; prin2!* ";" >>;
      terpri!*(nil);
      printstr "We also have its true multivariate leading";
      printstr "coefficient whose factors (call these the";
      printstr "LC-factors) are:";
      fac!-printfactors v;
      printstr "We want to determine how these LC-factors are";
      printstr "distributed over the leading coefficients of each";
      printstr "IM-factor.  This enables us to feed the resulting";
      printstr "image factors into a multivariate Hensel";
      printstr "construction.";
      printstr "We distribute each LC-factor in turn by dividing";
      printstr "its image into delta times the leading coefficient";
      printstr "of each IM-factor until it finds one that it";
      printstr "divides exactly. The image set is chosen such that";
      printstr "this will only happen for the IM-factors to which";
      printstr "this LC-factor belongs - (there may be more than";
      printstr "one if the LC-factor occurs several times in the";
      printstr "leading coefficient of the original polynomial).";
      printstr "This choice also requires that we distribute the";
      printstr "LC-factors in a specific order:"
      >>;

symbolic procedure dist!.lc!.msg2(dvec,im!.factors,r);
    factor!-trace <<
      printstr "The leading coefficients are now correct to within an";
      printstr "integer factor and are as follows:";
      for j:=1:r do <<
        prinsf getv(im!.factors,j);
        prin2!* " with l.c. ";
        printsf getv(dvec,j) >> >>;

symbolic procedure dist!.lc!.msg3(dvec,im!.factors,r);
      factor!-trace <<
        printstr "Since delta=1, we have no non-trivial content of the";
        printstr
          "image to deal with so we know the true leading coefficients";
        printstr
          "exactly.  We fix the signs of the IM-factors to match those";
        printstr "of their true leading coefficients:";
        for j:=1:r do <<
          prinsf getv(im!.factors,j);
          prin2!* " with l.c. ";
          printsf getv(dvec,j) >> >>;

symbolic procedure dist!.lc!.msg4 delta;
    factor!-trace <<
      prin2!* " Here delta is not 1 meaning that we have a content, ";
      printstr delta;
      printstr "of the image to distribute among the factors somehow.";
      printstr "For each IM-factor we can divide its leading";
      printstr "coefficient by the image of its determined leading";
      printstr "coefficient and see if there is a non-trivial result.";
      printstr "This will indicate a factor of delta belonging to this";
      printstr "IM-factor's leading coefficient." >>;

endmodule;


module pfactor;  % Factorization of polynomials modulo p.

% Author: A. C. Norman, 1978.

fluid '(!*backtrace
        !*gcd
        base!-time
        current!-modulus
        gc!-base!-time
        last!-displayed!-gc!-time
        last!-displayed!-time
        m!-image!-variable
        modular!-info
        modulus!/2
        user!-prime);

symbolic procedure pfactor(q,p);
   % Q is a standard form. Factorize and return the factors mod p.
   begin scalar base!-time,last!-displayed!-time,
         gc!-base!-time,last!-displayed!-gc!-time,
         user!-prime,current!-modulus,modulus!/2,r,x;
    set!-time();
    if not numberp p then typerr(p,"number")
     else if not primep p then typerr(p,"prime");
    user!-prime:=p;
    set!-modulus p;
    if domainp q or null reduce!-mod!-p lc q then
       printc "*** Degenerate case in modular factorization";
    if not (length variables!-in!-form q=1) then
       rederr "Multivariate input to modular factorization";
    r:=reduce!-mod!-p q;
%   LNCOEFF := LC R;
    x := lnc r;
    r :=monic!-mod!-p r;
    print!-time "About to call FACTOR-FORM-MOD-P";
    r:=errorset(list('factor!-form!-mod!-p,mkquote r),t,!*backtrace);
    print!-time "FACTOR-FORM-MOD-P returned";
    if not errorp r then return x . car r;
    printc "****** FACTORIZATION FAILED******";
    return list(1,prepf q)   % 1 needed by factorize.
  end;


symbolic procedure factor!-form!-mod!-p p;
% input:
% p is a reduce standard form that is to be factorized
% mod prime;
% result:
% ((p1 . x1) (p2 . x2) .. (pn . xn))
% where p<i> are standard forms and x<i> are integers,
% and p= product<i> p<i>**x<i>;
    sort!-factors factorize!-by!-square!-free!-mod!-p p;


symbolic procedure factorize!-by!-square!-free!-mod!-p p;
    if p=1 then nil
    else if domainp p then (p . 1) . nil
    else
     begin
      scalar dp,v;
      v:=(mksp(mvar p,1).* 1) .+ nil;
      dp:=0;
      while evaluate!-mod!-p(p,mvar v,0)=0 do <<
        p:=quotfail!-mod!-p(p,v);
        dp:=dp+1 >>;
      if dp>0 then return ((v . dp) .
        factorize!-by!-square!-free!-mod!-p p);
      dp:=derivative!-mod!-p p;
      if dp=nil then <<
%here p is a something to the power current!-modulus;
        p:=divide!-exponents!-by!-p(p,current!-modulus);
        p:=factorize!-by!-square!-free!-mod!-p p;
        return multiply!-multiplicities(p,current!-modulus) >>;
      dp:=gcd!-mod!-p(p,dp);
      if dp=1 then return factorize!-pp!-mod!-p p;
%now p is not square-free;
      p:=quotfail!-mod!-p(p,dp);
%factorize p and dp separately;
      p:=factorize!-pp!-mod!-p p;
      dp:=factorize!-by!-square!-free!-mod!-p dp;
% i feel that this scheme is slightly clumsy, but
% square-free decomposition mod p is not as straightforward
% as square free decomposition over the integers, and pfactor
% is probably not going to be slowed down too badly by
% this;
      return mergefactors(p,dp)
   end;




%**********************************************************************;
% code to factorize primitive square-free polynomials mod p;



symbolic procedure divide!-exponents!-by!-p(p,n);
    if isdomain p then p
    else (mksp(mvar p,exactquotient(ldeg p,n)) .* lc p) .+
       divide!-exponents!-by!-p(red p,n);

symbolic procedure exactquotient(a,b);
  begin
    scalar w;
    w:=divide(a,b);
    if cdr w=0 then return car w;
    error(50,list("Inexact division",list(a,b,w)))
  end;


symbolic procedure multiply!-multiplicities(l,n);
    if null l then nil
    else (caar l . (n*cdar l)) .
        multiply!-multiplicities(cdr l,n);


symbolic procedure mergefactors(a,b);
% a and b are lists of factors (with multiplicities),
% merge them so that no factor occurs more than once in
% the result;
    if null a then b
    else mergefactors(cdr a,addfactor(car a,b));

symbolic procedure addfactor(a,b);
%add factor a into list b;
    if null b then list a
    else if car a=caar b then
      (car a . (cdr a + cdar b)) . cdr b
    else car b . addfactor(a,cdr b);

symbolic procedure factorize!-pp!-mod!-p p;
%input a primitive square-free polynomial p,
% output a list of irreducible factors of p;
  begin
    scalar vars;
    if p=1 then return nil
    else if isdomain p then return (p . 1) . nil;
% now I am certain that p is not degenerate;
    print!-time "primitive square-free case detected";
    vars:=variables!-in!-form p;
    if length vars=1 then return unifac!-mod!-p p;
    errorf "SHAMBLED IN PFACTOR - MULTIVARIATE CASE RESURFACED"
  end;

symbolic procedure unifac!-mod!-p p;
%input p a primitive square-free univariate polynomial
%output a list of the factors of p over z mod p;
  begin
    scalar modular!-info,m!-image!-variable;
    if isdomain p then return nil
    else if ldeg p=1 then return (p . 1) . nil;
    modular!-info:=mkvect 1;
    m!-image!-variable:=mvar p;
    get!-factor!-count!-mod!-p(1,p,user!-prime,nil);
    print!-time "Factor counts obtained";
    get!-factors!-mod!-p(1,user!-prime);
    print!-time "Actual factors extracted";
    return for each z in getv(modular!-info,1) collect (z . 1)
  end;

endmodule;


module vecpoly;

% Authors: A. C. Norman and P. M. A. Moore, 1979;

fluid '(current!-modulus safe!-flag);


%**********************************************************************;
% Routines for working with modular univariate polynomials
% stored as vectors. Used to avoid unwarranted storage management
% in the mod-p factorization process;


safe!-flag:=carcheck 0;


symbolic procedure copy!-vector(a,da,b);
% Copy A into B;
 << for i:=0:da do
      putv(b,i,getv(a,i));
    da >>;

symbolic procedure times!-in!-vector(a,da,b,db,c);
% Put the product of A and B into C and return its degree.
% C must not overlap with either A or B;
  begin
    scalar dc,ic,w;
    if da#<0 or db#<0 then return minus!-one;
    dc:=da#+db;
    for i:=0:dc do putv(c,i,0);
    for ia:=0:da do <<
      w:=getv(a,ia);
      for ib:=0:db do <<
        ic:=ia#+ib;
        putv(c,ic,modular!-plus(getv(c,ic),
          modular!-times(w,getv(b,ib)))) >> >>;
    return dc
  end;


symbolic procedure quotfail!-in!-vector(a,da,b,db);
% Overwrite A with (A/B) and return degree of result.
% The quotient must be exact;
    if da#<0 then da
    else if db#<0 then errorf "Attempt to divide by zero"
    else if da#<db then errorf "Bad degrees in QUOTFAIL-IN-VECTOR"
    else begin
      scalar dc;
      dc:=da#-db; % Degree of result;
      for i:=dc step -1 until 0 do begin
        scalar q;
        q:=modular!-quotient(getv(a,db#+i),getv(b,db));
        for j:=0:db#-1 do
          putv(a,i#+j,modular!-difference(getv(a,i#+j),
            modular!-times(q,getv(b,j))));
        putv(a,db#+i,q)
      end;
      for i:=0:db#-1 do if getv(a,i) neq 0 then
        errorf "Quotient not exact in QUOTFAIL!-IN!-VECTOR";
      for i:=0:dc do
        putv(a,i,getv(a,db#+i));
      return dc
    end;


symbolic procedure remainder!-in!-vector(a,da,b,db);
% Overwrite the vector A with the remainder when A is
% divided by B, and return the degree of the result;
  begin
    scalar delta,db!-1,recip!-lc!-b,w;
    if db=0 then return minus!-one
    else if db=minus!-one then errorf "ATTEMPT TO DIVIDE BY ZERO";
    recip!-lc!-b:=modular!-minus modular!-reciprocal getv(b,db);
    db!-1:=db#-1; % Leading coeff of B treated specially, hence this;
    while not((delta:=da#-db) #< 0) do <<
      w:=modular!-times(recip!-lc!-b,getv(a,da));
      for i:=0:db!-1 do
        putv(a,i#+delta,modular!-plus(getv(a,i#+delta),
          modular!-times(getv(b,i),w)));
      da:=da#-1;
      while not(da#<0) and getv(a,da)=0 do da:=da#-1 >>;
    return da
  end;

symbolic procedure evaluate!-in!-vector(a,da,n);
% Evaluate A at N;
  begin
    scalar r;
    r:=getv(a,da);
    for i:=da#-1 step -1 until 0 do
      r:=modular!-plus(getv(a,i),
        modular!-times(r,n));
    return r
  end;

symbolic procedure gcd!-in!-vector(a,da,b,db);
% Overwrite A with the gcd of A and B. On input A and B are
% vectors of coefficients, representing polynomials
% of degrees DA and DB. Return DG, the degree of the gcd;
  begin
    scalar w;
    if da=0 or db=0 then << putv(a,0,1); return 0 >>
    else if da#<0 or db#<0 then errorf "GCD WITH ZERO NOT ALLOWED";
top:
% Reduce the degree of A;
    da:=remainder!-in!-vector(a,da,b,db);
    if da=0 then << putv(a,0,1); return 0 >>
    else if da=minus!-one then <<
      w:=modular!-reciprocal getv(b,db);
      for i:=0:db do putv(a,i,modular!-times(getv(b,i),w));
      return db >>;
% Now reduce degree of B;
    db:=remainder!-in!-vector(b,db,a,da);
    if db=0 then << putv(a,0,1); return 0 >>
    else if db=minus!-one then <<
      w:=modular!-reciprocal getv(a,da);
      if not (w=1) then
        for i:=0:da do putv(a,i,modular!-times(getv(a,i),w));
      return da >>;
    go to top
  end;



carcheck safe!-flag;


endmodule;


end;


REDUCE Historical
REDUCE Sourceforge Project | Historical SVN Repository | GitHub Mirror | SourceHut Mirror | NotABug Mirror | Chisel Mirror | Chisel RSS ]