File psl-1983/3-1/lpt/15-debug.lpt from the latest check-in


PSL Manual                    7 February 1983               Debugging Tools
section 15.0                                                      page 15.1

                                CHAPTER 15
                                CHAPTER 15
                                CHAPTER 15
                              DEBUGGING TOOLS
                              DEBUGGING TOOLS
                              DEBUGGING TOOLS




     15.1. Introduction .  .  .  .  .  .  .  .  .  .  .  .  .  .  .    15.1
          15.1.1. Brief Summary of Full Debug Package .  .  .  .  .    15.1
          15.1.2. Mini-Trace Facility  .  .  .  .  .  .  .  .  .  .    15.2
          15.1.3. Step  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .    15.3
                                                                       ....
          15.1.4. Functions Which Depend on Redefining User Functions..15.4
                  
          15.1.5. A Few Known Deficiencies.  .  .  .  .  .  .  .  .    15.5
     15.2. Tracing Function Execution  .  .  .  .  .  .  .  .  .  .    15.5
          15.2.1. Tracing Functions .  .  .  .  .  .  .  .  .  .  .    15.5
          15.2.2. Saving Trace Output  .  .  .  .  .  .  .  .  .  .    15.6
          15.2.3. Making Tracing More Selective .  .  .  .  .  .  .    15.7
          15.2.4. Turning Off Tracing  .  .  .  .  .  .  .  .  .  .    15.9
          15.2.5. Enabling Debug Facilities and Automatic Tracing of   15.9
                  Newly Defined Functions .  .  .  .  .  .  .  .  .  
     15.3. A Heavy Handed Backtrace Facility .  .  .  .  .  .  .  .   15.10
     15.4. Embedded Functions .  .  .  .  .  .  .  .  .  .  .  .  .   15.11
     15.5. Counting Function Invocations  .  .  .  .  .  .  .  .  .   15.12
     15.6. Stubs  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   15.12
     15.7. Functions for Printing Useful Information  .  .  .  .  .   15.13
     15.8. Printing Circular and Shared Structures .  .  .  .  .  .   15.13
     15.9. Internals and Customization .  .  .  .  .  .  .  .  .  .   15.14
          15.9.1. User Hooks  .  .  .  .  .  .  .  .  .  .  .  .  .   15.14
          15.9.2. Functions Used for Printing/Reading .  .  .  .  .   15.15
     15.10. Example  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   15.16




15.1. Introduction
15.1. Introduction
15.1. Introduction

  PSL  offers  a small group of debugging functions in a mini-trace package
described in Section MINITRACE; in addition, there is a separate  debugging
package  which  is  the  subject  of  the bulk of this Chapter.  To use the
debugging package (LOAD DEBUG).  An extensive example showing  the  use  of
the facilities in the debugging package can be found in Section 15.10.


15.1.1. Brief Summary of Full Debug Package
15.1.1. Brief Summary of Full Debug Package
15.1.1. Brief Summary of Full Debug Package

  The  PSL  debugging package contains a selection of functions that can be
                                                                   1
used to aid program development and to investigate faulty programs. 
_______________

  1
   Much of this Chapter was adapted from a paper by Norman and Morrison.
Debugging Tools               7 February 1983                    PSL Manual
page 15.2                                                      section 15.1

  It contains the following facilities.


   - A  trace  package.    This  allows  the user to see the arguments
     passed to and the values returned by selected functions.   It  is
     also  possible to have traced interpreted functions print all the
                                SetQ
                                SetQ
     assignments they make with SetQ (see Section 15.2).

   - A backtrace facility.  This allows one to see which of a  set  of
     selected  functions were active as an error occurred (see Section
     15.3).

   - Embedded functions make it possible to  do  everything  that  the
     trace  package  can do, and much more besides (see Section 15.4).
     This facility is available only in RLISP.

   - Some primitive statistics gathering (see Section 15.5).

   - Generation of simple stubs.  If invoked,  procedures  defined  as
     stubs simply print their argument and read a value to return (see
     Section 15.6).

   - Some  functions for printing useful information, such as property
     lists, in an intelligible format (see Section 15.7).

     PrintX
     PrintX
   - PrintX is a function that can print circular and re-entrant lists
     and vectors, and so can sometimes allow debugging to proceed even
                                                            RplacA
                                                            RplacA
     in the face of severe damage caused by the wild use of RplacA and
     RplacD
     RplacD
     RplacD (see Section 15.8).


  [??? Install a feature BR and UNBR to wrap a  break  around  functions.
  [??? Install a feature BR and UNBR to wrap a  break  around  functions.
  [??? Install a feature BR and UNBR to wrap a  break  around  functions.
  See the old mini-trace (PK:MINI-TRACE.RED).  ???]
  See the old mini-trace (PK:MINI-TRACE.RED).  ???]
  See the old mini-trace (PK:MINI-TRACE.RED).  ???]


15.1.2. Mini-Trace Facility
15.1.2. Mini-Trace Facility
15.1.2. Mini-Trace Facility

  A  small  trace  package  is  provided  in  the bare PSL and RLISP.  This
                   Tr
                   Tr
provides a command Tr for tracing LISP function calls,  as  does  the  full
                                                           UnTr
                                                           UnTr
Debug  package.    This command and the associated command UnTr are used in
the form:


   Tr
   Tr
   Tr <function name>, <function name>,..., <function name>;
 or
   Tr
   Tr
   Tr( <function name>, <function name>,..., <function name>);

  from RLISP, and

    Tr
    Tr
   (Tr <function name> <function name> ... <function name>)

  from LISP.
PSL Manual                    7 February 1983               Debugging Tools
section 15.1                                                      page 15.3

 Tr
 Tr  _____ __    _________                                            _____
(Tr [FNAME:id]): Undefined                                            macro


 UnTr
 UnTr  _____ __    _________                                          _____
(UnTr [FNAME:id]): Undefined                                          macro

  Mini-Trace also contains the capability for tracing interpreted functions
                      Trst
                      Trst
at  a  deeper level.  Trst causes the body of an interpreted function to be
                                                                    Trst
                                                                    Trst
redefined so that all assignments in its body are printed.  Calling Trst on
                                     Tr                          UnTrst
                                     Tr                          UnTrst
a function has the effect of doing a Tr on it too.  The function UnTrst  is
                                Trst
                                Trst
used to turn off the effects of Trst.  These functions are used in the same
       Tr     UnTr
       Tr     UnTr
way as Tr and UnTr.


 Trst
 Trst  _____ __    _________                                          _____
(Trst [FNAME:id]): Undefined                                          macro


 UnTrst
 UnTrst  _____ __    _________                                        _____
(UnTrst [FNAME:id]): Undefined                                        macro

                                    Tr     Trst
                                    Tr     Trst
  Note  that  only  the  functions  Tr and Trst are in Mini-Trace.  However
invoking either of them causes the debug package to be loaded,  making  the
rest of the functions in Debug available.

  Do (HELP TRACE) for more information, or see Section 15.2.


15.1.3. Step
15.1.3. Step
15.1.3. Step


 Step
 Step _ ____   ___                                                     ____
(Step F:form): any                                                     expr

     Step
     Step                                                           _
     Step  is a loadable option (LOAD STEP).  It evaluates the form F,
                       _
     single-stepping.  F is printed, preceded by -> on entry, <->  for
                                              _
     macro  expansions.    After  evaluation, F is printed preceded by
     <- and followed by the result of evaluation.  A single  character
     is read at each step to determine the action to be taken:


     <Ctrl-N> (Next)
               Step  to  the  Next thing.  The stepper continues until
               the next thing to print out,  and  it  accepts  another
               command.

     Space     Go  to  the  next thing at this level.  In other words,
               continue to evaluate at  this  level,  but  don't  step
               anything  at  lower levels.  This is a good way to skip
               over parts of the evaluation that don't interest you.

     <Ctrl-U> (Up)
               Continue evaluating until we go up one level.  This  is
               like  the  space  command,  only more so; it skips over
               anything on the current level as well as lower levels.
Debugging Tools               7 February 1983                    PSL Manual
page 15.4                                                      section 15.1

     <Ctrl-X> (eXit)
               Exit; finish evaluating without any more stepping.

     <Ctrl-G> or <Ctrl-P> (Grind)
               Grind (i.e. prettyprint) the current form.

     <Ctrl-R>  Grind the form in Rlisp syntax.

     <Ctrl-E> (Editor)
               Invoke the structure editor on the current form.

     <Ctrl-B> (Break)
               Enter  a  break  loop  from  which  you can examine the
               values of variables and other aspects  of  the  current
               environment.

     <Ctrl-L>  Redisplay the last 10 pending forms.

     ?         Display the help file.


                                                H
                                                H             _
     To step through the evaluation of function H on argument X do

        (Step '(H X))


15.1.4. Functions Which Depend on Redefining User Functions
15.1.4. Functions Which Depend on Redefining User Functions
15.1.4. Functions Which Depend on Redefining User Functions

  A  number  of facilities in Debug depend on redefining user functions, so
that they may log or print behavior if called.  The Debug package tries  to
redefine   user  functions  once  and  for  all,  and  then  keep  specific
information about what is required at run time in a  table.    This  allows
considerable flexibility, and is used for a number of different facilities,
including  trace/traceset  in Section 15.2, a backtrace facility in Section
15.3, some statistics gathering in Section 15.5 and embedding functions  in
Section 15.4.

  Some  facilities,  like trace and EMB (the embedding function), only take
effect if further action is requested on specific user functions.   Others,
like  backtrace  and  statistics, are of a more global nature.  Once one of
these global facilities is enabled it applies to all functions  which  have
                                                   Restr
                                                   Restr
been  made  "known"  to  Debug.  To undo this, use Restr defined in Section
15.2.4.


15.1.5. A Few Known Deficiencies
15.1.5. A Few Known Deficiencies
15.1.5. A Few Known Deficiencies


                                                         Cons
                                                         Cons
   - An attempt to trace certain system functions (e.g.  Cons)  causes
     the  trace  package  to  overwrite  itself.    Given the names of
     functions that cause this sort of trouble it is  fairly  easy  to
     change the trace package to deal gracefully with them - so report
PSL Manual                    7 February 1983               Debugging Tools
section 15.1                                                      page 15.5

     trouble to a system expert.

   - The Portable LISP Compiler uses information about registers which
     certain  system  functions  destroy.  Tracing these functions may
     make the optimizations based thereon invalid.  The correct way of
     handling this problem is currently under consideration.   In  the
     mean  time you should avoid tracing any functions with the ONEREG
     or TWOREG flags.



15.2. Tracing Function Execution
15.2. Tracing Function Execution
15.2. Tracing Function Execution


15.2.1. Tracing Functions
15.2.1. Tracing Functions
15.2.1. Tracing Functions

  To see when a function gets called, what arguments it is given  and  what
value it returns, do  

   (TR functionname)

or if several functions are of interest,   

   (TR name1 name2 ...)


 Tr
 Tr  _____ __    _________                                            _____
(Tr [FNAME:id]): Undefined                                            macro

                                                 ____  _____  _____
                                                 ____  _____  _____
                                                 ____  _____  _____
                                                 expr  fexpr  nexpr
                                                 expr  fexpr  nexpr
     If  the specified functions are defined (as expr, fexpr, nexpr or
     _____
     _____
     _____
     macro   Tr
     macro   Tr
     macro), Tr modifies the  function  definition  to  include  print
     statements.    The  following  example  shows the style of output
     produced by this sort of tracing:

     The input...

        (DE XCDR (A)
          (CDR A) %A very simple function)
        (TR XCDR)
        (XCDR '(P Q R))

     gives output...

        XCDR entered
           A: (P Q R)
        XCDR = (Q R)

  Interpreted functions can also be traced at a deeper level.
Debugging Tools               7 February 1983                    PSL Manual
page 15.6                                                      section 15.2

 Trst
 Trst  _____ __    _________                                          _____
(Trst [FNAME:id]): Undefined                                          macro

        (TRST name1 name2 ...)

     causes  the  body  of  an interpreted function to be redefined so
                                     SetQ
                                     SetQ
     that all assignments (made with SetQ) in its  body  are  printed.
              Trst
              Trst
     Calling  Trst on a function automatically has the effect of doing
       Tr
       Tr
     a Tr on it too, so that it is not possible  to  have  a  function
                Trst         Tr
                Trst         Tr
     subject to Trst but not Tr.

  Trace  output  often  appears mixed up with output from the program being
                                         Tr
                                         Tr
studied, and to avoid too much confusion Tr arranges to preserve the column
in which printing was taking place across any output that it generates.  If
trace output is produced as part of a line has been printed, the trace data
are enclosed in markers '<' and '>', and these symbols are  placed  on  the
line  so  as  to  mark  out the amount of printing that had occurred before
trace was entered.


            __________                                               ______
!*NOTRARGS [Initially: NIL]                                          switch

     If !*NOTRARGS is T, printing of the arguments of traced functions
     is suppressed.


15.2.2. Saving Trace Output
15.2.2. Saving Trace Output
15.2.2. Saving Trace Output

  The trace facility makes it possible to discover in  some  detail  how  a
function  is  used,  but  in  certain  cases  its direct use results in the
generation of vast amounts  of  (mostly  useless)  print-out.    There  are
several  options.    One  is  to  make  tracing more selective (see Section
15.2.3).  The other, discussed here, is  to  either  print  only  the  most
recent information, or dump it all to a file to be perused at leisure.

  Debug  has  a  ring buffer in which it saves information to reproduce the
                                                            Tr       Trst
                                                            Tr       Trst
most recent information printed by the trace facility (both Tr  and  Trst).
                                       Tr
                                       Tr
To see the contents of this buffer use Tr without any arguments

   (TR)


 NewTrBuff
 NewTrBuff _ _______   _________                                       ____
(NewTrBuff N:integer): Undefined                                       expr

     To set the number of entries retained to n use  

        (NEWTRBUFF n)

     Initially the number of entries in the ring buffer is 5.
PSL Manual                    7 February 1983               Debugging Tools
section 15.2                                                      page 15.7

         __________                                                  ______
!*TRACE [Initially: T]                                               switch

     Enables runtime printing of trace information for functions which
     have been traced.

  Turning off the TRACE switch  

   (OFF TRACE)

suppresses  the  printing of any trace information at run time; it is still
saved in the ring buffer.   Thus  a  useful  technique  for  isolating  the
function  in  which an error occurs is to trace a large number of candidate
functions, do OFF TRACE and after the failure  look  at  the  latest  trace
                       Tr
                       Tr
information by calling Tr with no arguments.


 TrOut
 TrOut  _____ __    _________                                          ____
(TrOut [FNAME:id]): Undefined                                          expr


 StdTrace
 StdTrace    _________                                                 ____
(StdTrace ): Undefined                                                 expr

     Normally  trace  information  is directed to the standard output,
     rather than the currently selected output.  To send it  elsewhere
     use the statement  

        (TROUT filename)

     The statement  

        (STDTRACE)

     closes  that file and cause future trace output to be sent to the
     standard output.  Note that output saved in the  ring  buffer  is
     sent  to  the  currently  selected  output,  not that selected by
     TrOut
     TrOut
     TrOut.


15.2.3. Making Tracing More Selective
15.2.3. Making Tracing More Selective
15.2.3. Making Tracing More Selective


 TraceCount
 TraceCount _ _______   _________                                      ____
(TraceCount N:integer): Undefined                                      expr

                   TraceCount
                   TraceCount
     The function (TraceCount n) can  be  used  to  switch  off  trace
                                                            TraceCount
                                                            TraceCount
     output.    If n is a positive number, after a call to (TraceCount
     n) the next n items of trace output that are  generated  are  not
                  TraceCount
                  TraceCount
     printed.    (TraceCount  n)  with n negative or zero switches all
                              TraceCount
                              TraceCount
     trace output back on.   (TraceCount  NIL)  returns  the  residual
     count,  i.e.  the  number  of  additional  trace entries that are
     suppressed.

  To get detailed tracing in the stages of a calculation that lead up to an
error, try 
Debugging Tools               7 February 1983                    PSL Manual
page 15.8                                                      section 15.2

   (TRACECOUNT 1000000) % or some other suitable large number
   (TR ...)  % as required
   %run the failing problem
   (TRACECOUNT NIL)

It  is now possible to calculate how many trace entries occurred before the
                                                  TraceCount
                                                  TraceCount
error, and so the problem can now be re-run with  TraceCount  set  to  some
number slightly less than that.

                                TraceCount
                                TraceCount
  An  alternative to the use of TraceCount for getting more selective trace
          TrIn
          TrIn
output is TrIn.


 TrIn
 TrIn  _____ __    _________                                          _____
(TrIn [FNAME:id]): Undefined                                          macro

            TrIn
            TrIn
     To use TrIn, establish tracing for  a  collection  of  functions,
            Tr                                     TrIn
            Tr                                     TrIn
     using  Tr  in  the  normal  way.    Then  do  TrIn  on some small
                                                                   Tr
                                                                   Tr
     collection of other functions.  The effect is  just  as  for  Tr,
     except  that  trace  output  is  inhibited  except  if control is
                            TrIn
                            TrIn
     dynamically within the TrIn functions.  This makes it possible to
         Tr
         Tr
     use Tr on a number of heavily used general purpose functions, and
     then only see the calls to them that occur within  some  specific
     subpart of your entire program.


                 __________                                          ______
TRACEMINLEVEL!* [Initially: 0]                                       global


                 __________                                          ______
TRACEMAXLEVEL!* [Initially: 1000]                                    global

     The  global  variables TRACEMINLEVEL!* and TRACEMAXLEVEL!* (whose
     values should be  non-negative  integers)  are  the  minimum  and
     maximum  depths of recursion at which to print trace information.
     Thus if you only  want  to  see  top  level  calls  of  a  highly
                                                               Length
                                                               Length
     recursive  function  (like  a  simple-minded  version  of Length)
     simply do   

        (SETQ TRACEMAXLEVEL!* 1)


15.2.4. Turning Off Tracing
15.2.4. Turning Off Tracing
15.2.4. Turning Off Tracing

  If a particular function no longer needs tracing, do  

   (UNTR functionname)

or   

   (UNTR name1 name2 ...)
PSL Manual                    7 February 1983               Debugging Tools
section 15.2                                                      page 15.9

 UnTr
 UnTr  _____ __    _________                                          _____
(UnTr [FNAME:id]): Undefined                                          macro

     This  merely  suppresses  generation  of  trace  output.    Other
     information, such as invocation  counts,  backtrace  information,
     and the number of arguments is retained.

  To completely destroy information about a function use   

   (RESTR name1 name2 ...)


 Restr
 Restr  _____ __    _________                                          ____
(Restr [FNAME:id]): Undefined                                          expr

     This returns the function to it's original state.

  To suppress traceset output without suppressing normal trace output use  


   (UNTRST name1 name2 ...)


 UnTrst
 UnTrst  _____ __    _________                                        _____
(UnTrst [FNAME:id]): Undefined                                        macro

  UnTr      Trst                 UnTrst
  UnTr      Trst                 UnTrst
  UnTring a Trsted function also UnTrst's it.

  TrIn                                UnTr             UnTrst
  TrIn                                UnTr             UnTrst
  TrIn in Section 15.2.3 is undone by UnTr (but not by UnTrst).


15.2.5. Enabling Debug Facilities and Automatic Tracing
15.2.5. Enabling Debug Facilities and Automatic Tracing
15.2.5. Enabling Debug Facilities and Automatic Tracing

  Under the influence of  

   (ON TRACEALL)

                                        PutD                           PutD
                                        PutD                           PutD
any  functions  successfully defined by PutD are traced.  Note that if PutD
fails (as might happen under the influence of the LOSE flag) no attempt  is
made to trace the function.

                                         Btr                     TrCount
                                         Btr                     TrCount
  To  enable  those  facilities (such as Btr in Section 15.3 and TrCount in
Section 15.5) which require redefinition, but without tracing, use  

   (ON INSTALL)

  Thus, a common scenario might look like 

   (ON INSTALL)
   (DSKIN "MYFNS.SL")
   (OFF INSTALL)

which would enable the backtrace and statistics routines to work  with  all
the functions defined in the MYFNS file.
Debugging Tools               7 February 1983                    PSL Manual
page 15.10                                                     section 15.2

           __________                                                ______
!*INSTALL [Initially: NIL]                                           switch

                                                           PutD
                                                           PutD
     Causes DEBUG to know about all functions defined with PutD.


            __________                                               ______
!*TRACEALL [Initially: NIL]                                          switch

                                       PutD
                                       PutD
     Causes all functions defined with PutD to be traced.



15.3. A Heavy Handed Backtrace Facility
15.3. A Heavy Handed Backtrace Facility
15.3. A Heavy Handed Backtrace Facility

  The  backtrace  facility  allows  one  to  see which of a set of selected
                                                            Btr
                                                            Btr
functions were active as an error occurred.  The  function  Btr  gives  the
backtrace information.  The information kept is controlled by two switches:
!*BTR and !*BTRSAVE.

  When  backtracing  is  enabled  (BTR is on), a stack is kept of functions
entered but not left.  This stack records the names of  functions  and  the
arguments  that  they were called with.  If a function returns normally the
stack is unwound.  If however the function fails, the stack is  left  alone
by the normal LISP error recovery processes.


 Btr
 Btr  _____ __    _________                                           _____
(Btr [FNAME:id]): Undefined                                           macro

                                           Btr
                                           Btr
     When   called   with  no  arguments,  Btr  prints  the  backtrace
     information available.  When called with arguments (which  should
     be  function names), the stack is reset to NIL, and the functions
     named are added to the list of functions Debug knows about.


 ResBtr
 ResBtr  _____ __    _________                                         ____
(ResBtr [FNAME:id]): Undefined                                         expr

     ResBtr
     ResBtr
     ResBtr resets the backtrace stack to NIL.


       __________                                                    ______
!*BTR [Initially: T]                                                 switch

     If !*BTR is T, it enables  backtracing  of  functions  which  the
     Debug  package  has  been  told  about.   If it is NIL, backtrace
     information is not saved.


           __________                                                ______
!*BTRSAVE [Initially: T]                                             switch

     Controls the disposition of  information  about  functions  which
                      ErrorSet
                      ErrorSet
     failed within an ErrorSet.  If it is on, the information is saved
     separately  and printed when the stack is printed.  If it is off,
     the information is thrown away.
PSL Manual                    7 February 1983               Debugging Tools
section 15.4                                                     page 15.11

15.4. Embedded Functions
15.4. Embedded Functions
15.4. Embedded Functions

  Embedding  means  redefining  a  function in terms of its old definition,
usually with the intent that the new version does some tests  or  printing,
uses  the  old  one,  does some more printing and then returns.  If ff is a
function of two arguments, it can be embedded  using  a  statement  of  the
form:

   SYMBOLIC EMB PROCEDURE ff(A1,A2);
     << PRINT A1;
        PRINT A2;
        PRINT ff(A1,A2) >>;

                                                                         Tr
                                                                         Tr
The  effect of this particular use of embed is broadly similar to a call Tr
ff, and arranges that whenever ff is called it prints  both  its  arguments
and  its  result.  After a function has been embedded, the embedding can be
temporarily removed by the use of 

   UNEMBED ff;

and it can be reinstated by 

   EMBED ff;

  This facility is available only to RLISP users.



15.5. Counting Function Invocations
15.5. Counting Function Invocations
15.5. Counting Function Invocations


           __________                                                ______
!*TRCOUNT [Initially: T]                                             switch

     Enables counting invocations of functions known to Debug.  If the
     switch TRCOUNT is ON, the number of times user functions known to
     Debug are entered is counted.  The statement  

        (ON TRCOUNT)

     also resets that count to zero.  The statement  

        (OFF TRCOUNT)

     causes a simple histogram of function invocations to be printed.

                                  Tr
                                  Tr
  If regular tracing (provided by Tr) is not desired, but you wish to count
the function invocations, use   

   (TRCNT name1 name2 ...)
Debugging Tools               7 February 1983                    PSL Manual
page 15.12                                                     section 15.5

 TrCnt
 TrCnt  _____ __    _________                                         _____
(TrCnt [FNAME:id]): Undefined                                         macro

  See also Section 15.2.5.



15.6. Stubs
15.6. Stubs
15.6. Stubs

  Stubs  are useful in top-down program development.  If a stub is invoked,
it prints its arguments and asks for a value to return.


 Stub
 Stub  __________ ____                                                _____
(Stub [FuncInvoke:form]):                                             macro

          __________
     Each FUNCINVOKE must be of the form (id  arg1  arg2  ...),  where
                                                    ____
                                                    ____
                                                    ____
                                    Stub            expr
                                    Stub            expr
     there  may be zero arguments.  Stub defines an expr for each form
     with name id and formal arguments arg1, arg2, etc.   If  executed
     such a stub prints its arguments and reads a value to return.

  The statement   

   (STUB (FOO U V))

           ____
           ____
           ____
           expr  Foo
           expr  Foo
defines an expr, Foo, of two arguments.


 FStub
 FStub  __________ ____    ___                                        _____
(FStub [FuncInvoke:form]): Nil                                        macro

                                             _____
                                             _____
                                             _____
     FStub                  Stub             fexpr
     FStub                  Stub             fexpr
     FStub does the same as Stub but defines fexprs.

  At  present the currently (i.e. when the stub is executed) selected input
and output are used.  This may be changed in the  future.    Algebraic  and
         _____
         _____
         _____
         macro
         macro
possibly macro stubs may be implemented in the future.



15.7. Functions for Printing Useful Information
15.7. Functions for Printing Useful Information
15.7. Functions for Printing Useful Information


 PList
 PList  _ __                                                          _____
(PList [X:id]):                                                       macro

        (PLIST id1 id2 ...)

                                                      __
     prints  the  property  lists  of  the  specified ids in an easily
     readable form.


 Ppf
 Ppf  _____ __                                                        _____
(Ppf [FNAME:id]):                                                     macro

        (PPF fn1 fn2 ...)

     prints the definitions and other  useful  information  about  the
PSL Manual                    7 February 1983               Debugging Tools
section 15.7                                                     page 15.13

     specified functions.



15.8. Printing Circular and Shared Structures
15.8. Printing Circular and Shared Structures
15.8. Printing Circular and Shared Structures

  Some  LISP  programs rely on parts of their data structures being shared,
           Eq                                                   Equal
           Eq                                                   Equal
so that an Eq test can be used rather than the more  expensive  Equal  one.
Other  programs  (either  deliberately  or  by accident) construct circular
                         RplacA    RplacD
                         RplacA    RplacD
lists through the use of RplacA or RplacD.  Such lists can be displayed  by
                    PrintX
                    PrintX
use of the function PrintX.  This function also prints circular vectors.


 PrintX
 PrintX _ ___   ___                                                    ____
(PrintX A:any): NIL                                                    expr

     If  given  a normal list the behavior of this function is similar
                Print
                Print
     to that of Print; if it is given  a  looped  or  re-entrant  data
     structures  it prints it in a special format.  The representation
             PrintX
             PrintX
     used by PrintX for re-entrant structures is based on the idea  of
     labels for those nodes in the structure that are referred to more
     than once.

  Consider the list created by the operations:  

   (SETQ R '(S W))
   (RPLACA R (CDR R))

             Print
             Print                    _
The function Print called on the list R gives

   ((W) W)

    PrintX
    PrintX                             _                              _
If  PrintX  is  called  on  the  list  R, it discovers that the list (W) is
referred to twice, and invents the label %L1 for it.  The structure is then
printed as 

   (%L1: (W) . %L1)

%L1: sets the label, and the other instance  of  %L1  refers  back  to  it.
Labeled  sublists  can appear anywhere within the list being printed.  Thus
the list created by the following statements     

   (SETQ L '(A B C))
   (SETQ K (CDR L))
   (SETQ X (CONS L K))

which is printed as 

   ((A B C) B C)

   Print                     PrintX
   Print                     PrintX
by Print could be printed by PrintX as
Debugging Tools               7 February 1983                    PSL Manual
page 15.14                                                     section 15.8

   ((A %L1, B C) . %L1)

A  label  set  with  a comma (rather than a colon) is a label for part of a
list, not for the sublist.


             __________                                              ______
!*SAVENAMES [Initially: NIL]                                         switch

                                                 PrintX
                                                 PrintX
     If on, names assigned to substructures  by  PrintX  are  retained
     from one use to the next.  Thus substructures common to different
     items will be shown as the same.



15.9. Internals and Customization
15.9. Internals and Customization
15.9. Internals and Customization

  This  Section  describes some internal details of the Debug package which
may be useful in customizing it for specific applications.  The  reader  is
urged to consult the source for further details.


15.9.1. User Hooks
15.9.1. User Hooks
15.9.1. User Hooks

  These  are  all  global  variables  whose  values  are  normally NIL.  If
                        ____
                        ____
                        ____
                        expr
                        expr
non-NIL, they should be exprs taking the number of variables specified, and
are called as specified.


            __________                                               ______
PUTDHOOK!* [Initially: NIL]                                          global

     Takes one argument, the function name.  It is  called  after  the
     function has been defined, and any tracing under the influence of
     !*TRACEALL or !*INSTALL has taken place.  It is not called if the
     function  cannot  be defined (as might happen if the function has
     been flagged LOSE).


                 __________                                          ______
TRACENTRYHOOK!* [Initially: NIL]                                     global

     Takes two arguments, the function name and a list of  the  actual
     arguments.    It  is  called  by  the  trace  package if a traced
     function is entered, but before it is executed.  The execution of
     a surrounding EMB function takes place after  TRACENTRYHOOK!*  is
     called.  This is useful if you need to call special user-provided
     print  routines  to  display  critical  data  structures,  as are
     TRACEXITHOOK!* and TRACEXPANDHOOK!*.


                __________                                           ______
TRACEXITHOOK!* [Initially: NIL]                                      global

     Takes two arguments, the function name and  the  value.    It  is
     called after the function has been evaluated.
PSL Manual                    7 February 1983               Debugging Tools
section 15.9                                                     page 15.15

                  __________                                         ______
TRACEXPANDHOOK!* [Initially: NIL]                                    global

                                                      _____
                                                      _____
                                                      _____
                                                      macro
                                                      macro
     Takes  two  arguments, the function name and the macro expansion.
                           _____                             _____
                           _____                             _____
                           _____                             _____
                           macro                             macro
                           macro                             macro
     It is only called for macros, and is called after  the  macro  is
     expanded, but before the expansion has been evaluated.


                 __________                                          ______
TRINSTALLHOOK!* [Initially: NIL]                                     global

     Takes  one argument, a function name.  It is called if a function
     is redefined by the Debug package, as  for  example  when  it  is
     first traced.  It is called before the redefinition takes place.


15.9.2. Functions Used for Printing/Reading
15.9.2. Functions Used for Printing/Reading
15.9.2. Functions Used for Printing/Reading

                            _____
                            _____
                            _____
                            EXPRS
                            EXPRS
  These  should all contain EXPRS taking the specified number of arguments.
The initial values are given in square brackets.


              __________                                             ______
PPFPRINTER!* [Initially: PRINT]                                      global

                                        Ppf
                                        Ppf
     Takes one argument.  It is used by Ppf to print the  body  of  an
     interpreted function.


                   __________                                        ______
PROPERTYPRINTER!* [Initially: PRETTYPRINT]                           global

                                          PList
                                          PList
     Takes  one  argument.  It is used by PList to print the values of
     properties.


               __________                                            ______
STUBPRINTER!* [Initially: PRINTX]                                    global

                                               Stub/FStub
                                               Stub/FStub
     Takes one argument.  Stubs defined  with  Stub/FStub  use  it  to
     print their arguments.


              __________                                             ______
STUBREADER!* [Initially: !-REDREADER]                                global

                                             Stub/FStub
                                             Stub/FStub
     Takes no arguments.  Stubs defined with Stub/FStub use it to read
     their return value.


               __________                                            ______
TREXPRINTER!* [Initially: PRINT]                                     global

     Takes one argument.  It is used to print the expansions of traced
     _____
     _____
     _____
     macro
     macro
     macros.
Debugging Tools               7 February 1983                    PSL Manual
page 15.16                                                     section 15.9

             __________                                              ______
TRPRINTER!* [Initially: PRINTX]                                      global

     Takes one argument.  It is used to print the arguments and values
     of traced functions.


           __________                                                ______
TRSPACE!* [Initially: 0]                                             global

     Controls indentation.



15.10. Example
15.10. Example
15.10. Example

  This  contrived  example demonstrates many of the available features.  It
is a transcript of an actual PSL session.
PSL Manual                    7 February 1983               Debugging Tools
section 15.10                                                    page 15.17

   @PSL
   PSL 3.1, 15-Nov-82
   1 lisp> (LOAD DEBUG)
   NIL
   2 lisp> (DE FOO (N)
   2 lisp>  (PROG (A)
   2 lisp>   (COND ((AND (NEQ (REMAINDER N 2) 0) (LESSP N 0))
   2 lisp>               (SETQ A (CAR N)))) %Should err out if N is a n
   2 lisp>   (COND ((EQUAL N 0) (RETURN 'BOTTOM)))
   2 lisp>   (SETQ N (DIFFERENCE N 2))
   2 lisp>   (SETQ A (BAR N))
   2 lisp>   (SETQ N (DIFFERENCE N 2))
   2 lisp>   (RETURN (LIST A (BAR N) A))))
   FOO
   3 lisp> (DE FOOBAR (N)
   3 lisp>  (PROGN (FOO N) NIL))
   FOOBAR
   4 lisp> (TR FOO FOOBAR)
   (FOO FOOBAR)
   5 lisp> (PPF FOOBAR FOO)


   EXPR procedure FOOBAR(N) [TRACED;Invoked 0 times]:
   PROGN
   (FOO N)
   NIL


   EXPR procedure FOO(N) [TRACED;Invoked 0 times]:
   PROG
   (A)
   (COND ((AND (NEQ (REMAINDER N 2) 0) (LESSP N 0)) (SETQ A (CAR N))))
   (COND ((EQUAL N 0) (RETURN 'BOTTOM)))
   (SETQ N (DIFFERENCE N 2))
   (SETQ A (BAR N))
   (SETQ N (DIFFERENCE N 2))
   (RETURN (LIST A (BAR N) A))

   (FOOBAR FOO)
   6 lisp> (ON COMP)
   NIL
   7 lisp> (DE BAR (N)
   7 lisp>  (COND ((EQUAL (REMAINDER N 2) 0) (FOO (TIMES 2 (QUOTIENT N
   7 lisp>        (T (FOO (SUB1 (TIMES 2 (QUOTIENT N 4)))))))
   *** (BAR): base 275266, length 21 words
   BAR
   8 lisp> (OFF COMP)
   NIL
   9 lisp> (FOOBAR 8)
   FOOBAR being entered
      N:   8
     FOO being entered
Debugging Tools               7 February 1983                    PSL Manual
page 15.18                                                    section 15.10

        N: 8
       FOO (level 2) being entered
          N:       2
         FOO (level 3) being entered
            N:     0
         FOO (level 3) = BOTTOM
         FOO (level 3) being entered
            N:     0
         FOO (level 3) = BOTTOM
       FOO (level 2) = (BOTTOM BOTTOM BOTTOM)
       FOO (level 2) being entered
          N:       2
         FOO (level 3) being entered
            N:     0
         FOO (level 3) = BOTTOM
         FOO (level 3) being entered
            N:     0
         FOO (level 3) = BOTTOM
       FOO (level 2) = (BOTTOM BOTTOM BOTTOM)
     FOO = (%L1: (BOTTOM BOTTOM BOTTOM) (BOTTOM BOTTOM BOTTOM)
   %L1)
   FOOBAR = NIL
   NIL
   10 lisp> % Notice how in the above PRINTX printed the return values
   10 lisp> % to show shared structure
   10 lisp> (TRST FOO)
   (FOO)
   11 lisp> (FOOBAR 8)
   FOOBAR being entered
      N:   8
     FOO being entered
        N: 8
     N := 6
       FOO (level 2) being entered
          N:       2
       N := 0
         FOO (level 3) being entered
            N:     0
         FOO (level 3) = BOTTOM
       A := BOTTOM
       N := -2
         FOO (level 3) being entered
            N:     0
         FOO (level 3) = BOTTOM
       FOO (level 2) = (BOTTOM BOTTOM BOTTOM)
     A := (BOTTOM BOTTOM BOTTOM)
     N := 4
       FOO (level 2) being entered
          N:       2
       N := 0
         FOO (level 3) being entered
            N:     0
PSL Manual                    7 February 1983               Debugging Tools
section 15.10                                                    page 15.19

         FOO (level 3) = BOTTOM
       A := BOTTOM
       N := -2
         FOO (level 3) being entered
            N:     0
         FOO (level 3) = BOTTOM
       FOO (level 2) = (BOTTOM BOTTOM BOTTOM)
     FOO = (%L1: (BOTTOM BOTTOM BOTTOM) (BOTTOM BOTTOM BOTTOM)
   %L1)
   FOOBAR = NIL
   NIL
   12 lisp> (TR BAR)
   (BAR)
   13 lisp> (FOOBAR 8)
   FOOBAR being entered
      N:   8
     FOO being entered
        N: 8
       BAR being entered
          A1:      6
         FOO (level 2) being entered
            N:     2
           BAR (level 2) being entered
              A1:  0
             FOO (level 3) being entered
                N: 0
             FOO (level 3) = BOTTOM
           BAR (level 2) = BOTTOM
           BAR (level 2) being entered
              A1:  -2
             FOO (level 3) being entered
                N: 0
             FOO (level 3) = BOTTOM
           BAR (level 2) = BOTTOM
         FOO (level 2) = (BOTTOM BOTTOM BOTTOM)
       BAR = (BOTTOM BOTTOM BOTTOM)
       BAR being entered
          A1:      4
         FOO (level 2) being entered
            N:     2
           BAR (level 2) being entered
              A1:  0
             FOO (level 3) being entered
                N: 0
             FOO (level 3) = BOTTOM
           BAR (level 2) = BOTTOM
           BAR (level 2) being entered
              A1:  -2
             FOO (level 3) being entered
                N: 0
             FOO (level 3) = BOTTOM
           BAR (level 2) = BOTTOM
Debugging Tools               7 February 1983                    PSL Manual
page 15.20                                                    section 15.10

         FOO (level 2) = (BOTTOM BOTTOM BOTTOM)
       BAR = (BOTTOM BOTTOM BOTTOM)
     FOO = (%L1: (BOTTOM BOTTOM BOTTOM) (BOTTOM BOTTOM BOTTOM)
   %L1)
   FOOBAR = NIL
   NIL
   14 lisp> (OFF TRACE)
   NIL
   15 lisp> (FOOBAR 8)
   NIL
   16 lisp> (TR)
   *** Start of saved trace information ***
           BAR (level 2) = BOTTOM
         FOO (level 2) = (BOTTOM BOTTOM BOTTOM)
       BAR = (BOTTOM BOTTOM BOTTOM)
     FOO = (%L1: (BOTTOM BOTTOM BOTTOM) (BOTTOM BOTTOM BOTTOM)
   %L1)
   FOOBAR = NIL
   *** End of saved trace information ***
   NIL
   17 lisp> (FOOBAR 13)
   ***** An attempt was made to do CAR on `-1', which is not a pair
   Break loop
   18 lisp break>> Q
   19 lisp> (TR)
   *** Start of saved trace information ***
     FOO being entered
        N: 13
       BAR being entered
          A1:      11
         FOO (level 2) being entered
            N:     3
           BAR (level 2) being entered
              A1:  1
             FOO (level 3) being entered
                N: -1
   *** End of saved trace information ***
   NIL
   20 lisp> (BTR)
   *** Backtrace: ***
   These functions were left abnormally:
     FOO
        N: -1
     BAR
        A1:        1
     FOO
        N: 3
     BAR
        A1:        11
     FOO
        N: 13
     FOOBAR
PSL Manual                    7 February 1983               Debugging Tools
section 15.10                                                    page 15.21

        N: 13
   *** End of backtrace ***
   NIL
   21 lisp> (STUB (FOO N))
   *** Function `FOO' has been redefined
   NIL
   22 lisp> (FOOBAR 13)
    Stub FOO called

   N: 13
   Return? :
   22 lisp> (BAR (DIFFERENCE N 2))
    Stub FOO called

   N: 3
   Return? :
   22 lisp> (BAR (DIFFERENCE N 2))
    Stub FOO called

   N: -1
   Return? :
   22 lisp> 'ERROR
   NIL
   23 lisp> (TR)
   *** Start of saved trace information ***
     BAR being entered
        A1:        11
       BAR (level 2) being entered
          A1:      1
       BAR (level 2) = ERROR
     BAR = ERROR
   FOOBAR = NIL
   *** End of saved trace information ***
   NIL
   24 lisp> (OFF TRCOUNT)


   FOOBAR(6)           ******************
   BAR(16)             ************************************************


   NIL
   22 lisp> (QUIT)


REDUCE Historical
REDUCE Sourceforge Project | Historical SVN Repository | GitHub Mirror | SourceHut Mirror | NotABug Mirror | Chisel Mirror | Chisel RSS ]