File psl-1983/3-1/doc/20/20-dist.lpt artifact f0cf6df7e9 part of check-in eb17ceb7f6


Utah Symbolic Computation Group                         June 1983
Operating Note No. xx












                          Release Notes

                 Extended DEC-20 V3.1 PSL System
                 Extended DEC-20 V3.1 PSL System
                 Extended DEC-20 V3.1 PSL System


                  M. L. Griss and R. R. Kessler

                 Utah Symbolic Computation Group
                   Computer Science Department
                       University of Utah
                   Salt Lake City, Utah 84112
                         (801)-581-5017

                          20 June 1983




                            ABSTRACT
                            ABSTRACT
                            ABSTRACT


This note describes how to install the extended DEC-20 version of
PSL.














Work  supported  in part by the National Science Foundation under
Grants MCS80-07034 and MCS81-21750,  and  by  development  grants
from  Boeing,  Patil  Systems,  Lucas  Film,  Wicat  and  Hewlett
Packard.
DEC-20 PSL Release                                         Page 2


1. INTRODUCTION
1. INTRODUCTION
1. INTRODUCTION

  The  attached  DUMPER  format  tape  contains most of the files
needed to use and maintain the DEC-20 PSL system. At UTAH we have
a <PSL> main directory, with a number  of  sub-directories,  each
containing  a  separate class of file, such as common interpreter
and compiler sources, DEC-20 sources, VAX sources, 68000 sources,
help files, etc.  This multi-directory structure  enables  us  to
manage  the  sources  for  all machines in a reasonable way. Most
people running PSL on the DEC-20 will not be interested in all of
the files, and certainly will not want to have them all on line.


  We  have  therefore  created  the  tape  to  enable  either   a
multi-directory  or  single  directory  model;  a  set of logical
device definitions will be TAKEn by the user (usually inserted in
the LOGIN.CMD file). Each separate distribution  directory  is  a
separate  SAVESET  on the attached dumper format tape, and so may
be individually restored into a common (<PSL> at Utah) directory,
or into appropriate sub-directories (<PSL.*> at Utah).



2. DISCLAIMER
2. DISCLAIMER
2. DISCLAIMER

  Please be aware that this is a PRELIMINARY release, and some of
the files and documentation are not quite complete; we  may  also
have  forgotten  some  files,  or sent incorrect versions. We are
releasing this preliminary version to you at this time to enhance
our collaborative research, and we expect the files  to  continue
to change quite rapidly as the system and distribution is tested.


  For these reasons please:


   a. Make a note of ANY problems, concerns, suggestions you
      have,  and  send  this  information  to  us  to aid in
      improving the system and this distribution mechanism.

   b. Please  do  not  REDISTRIBUTE  any  of  these   files,
      listings  or  machine readable form to anyone, and try
      to restrict access to a small group of users.



3. CONTENTS OF THE TAPE
3. CONTENTS OF THE TAPE
3. CONTENTS OF THE TAPE

  Attached to this note is a copy of the DUMPER run that  created
the  tape,  indicating  the  savesets,  the file names, and sizes
needed to restore each saveset.
DEC-20 PSL Release                                         Page 3


  The  following lists each of the savesets, their logical names,
sizes and whether or not it is included in the saveset:


SSname  Pages Min <Utah File Name> Logical Name

RESTORE-PSL 10 NO   ----            ----
                Files necessary to restore the PSL system.

PSL     1100  YES  <psl>            psl:  
                The executable  files  (PSL.EXE  and  RLISP.EXE),
                this  20-DIST.DOC  file,  .CMD  files  to  define
                appropriate logical names and a sample message to
                announce PSL availability.  Also, included are  a
                number  of news files announcing new features and
                changes, some files  associated  with  the  NMODE
                editor  and  a  version of psl (PSLCOMP.EXE) that
                will compile the argument on the execution line.

COMP     125  NO   <psl.comp>       pc:  
                Common compiler, LAP, FASL sources.

20COMP    55  NO   <psl.comp.20>    p20c:  
                DEC-20 specific compiler, LAP and FASL sources.

DIST      25  NO   <psl.dist>       pdist:  
                Files as an aid to the installer.

DOC      110  NO   <psl.doc>        pdoc:  
                Miscellaneous  documentation   files,   including
                random notes on new features.

20DOC     25  NO   <psl.doc.20>     p20d:  
                Documentation files that are 20 specific.

DOCNMODE 590  NO   <psl.doc.nmode>  pndoc:  
                NMODE documentation files.

GLISP    330  NO   <psl.glisp>      pg:  
                An object oriented LISP.

HELP     100  YES  <psl.help>       ph:  
                A set of *.HLP files, describing major modules.

KERNEL   225  NO   <psl.kernel>     pk:  
                Machine Independent kernel sources.

P20      560  NO   <psl.kernel.20>  p20:  
                DecSystem 20 dependent kernel sources.

LAP      500  YES  <psl.lap>        pl:  
                Mostly  binary  FASL  (*.B) files, with some LISP
DEC-20 PSL Release                                         Page 4


                files  (*.LAP)  for  loading multiple .B files of
                loadable (optional) modules.

LPT      430  NO   <psl.lpt>        plpt:  
                The   PSL   manual   in   printable   form   (has
                overprinting  and  underlining),  as  SCRIBE .LPT
                files.

NMODE    270  NO   <psl.nmode>      pn:  
                The NMODE text editor sources, which is  a  newer
                version   of   EMODE  developed  at  HP  Research
                Laboratories.

NMODEBIN 230  YES  <psl.nmode.binary> pnb:  
                The binary files associated with NMODE.

NONKERNEL  5  NO   <psl.nonkernel>  pnk:  
                The sources that are not in the kernel,  but  are
                kernel related.

PT       215  NO   <psl.tests>      pt:  
                A set of timing and test files.

P20T     500  NO   <psl.tests.20>   p20t:  
                DecSystem 20 specific test files.

UTIL     575  NO   <psl.util>       pu:  
                Sources for most utilities, useful as examples of
                PSL and RLISP code, and for customization.

P20U      60  NO   <psl.util.20>    p20u:  
                DecSystem 20 specific utilities.

WINDOWS   75  NO   <psl.windows>    pw:  
                The window support functions used by NMODE.

WINBIN    30  YES  <psl.windows.binary> pwb:  
                The binaries associated with the window support.



4. INSTALLING PSL
4. INSTALLING PSL
4. INSTALLING PSL

  When  installing  the  PSL system, you have two options for the
directory structure.  You may utilize a single directory for  all
of   the   file,  or  you  may  create  a  directory  tree  using
subdirectories.    The  Utah  group  utilizes  a  directory  tree
structure  and recommends its use when installing a "full" system
(that  includes  all  of  the  sources  and  the  capability   of
rebuilding  any  part of the system).  However, if only a minimal
system  is  desired,  it  can  be  accomplished  using  a  single
directory.
DEC-20 PSL Release                                         Page 5


4.1. Retrieve Control Files
4.1. Retrieve Control Files
4.1. Retrieve Control Files

  Whether   building   a  single  directory  system  or  multiple
directory system, logical name definition files and file  restore
control  files  must  be first retrieved.  Therefore, first mount
the dumper tape, at 1600 BPI (verify that there is no write  ring
in  the  tape).   Then, define X: as the appropriate tape device,
MTAn:, or use MOUNT if running a labeled tape system:  


@DEFINE X: MTAn:             or    @MOUNT TAPE X:
@ASSIGN X:


  Restore from the first saveset (PSL) the .cmd and .ctl files


   @DUMPER
   *tape X:
   *density 1600
   *files
   *account system-default
   *restore <*>*.*.* *.*.*


These files will be restored to  your  connected  directory,  and
should be copied to your main PSL directory after their creation.


4.2. Create a single subdirectory
4.2. Create a single subdirectory
4.2. Create a single subdirectory

  Create  a directory, call it <name> and define a logical device
PSL:  (a size of about 2400 should be sufficient).


  Any <name> will do, since the logical device name PSL: will  be
used.


   @DEF PSL: <name>


  Copy the minimal-* restored files to PSL


   @COPY minimal-*.* PSL:*.*


  Now  edit the file PSL:minimal-logical-names.cmd to reflect the
your choice of <name>.
DEC-20 PSL Release                                         Page 6


  Also   put   @TAKE   <name>minimal-logical-names.cmd   in  your
LOGIN.CMD.


  Finally, restore the  minimal  system  by  DOing  the  minimal-
restore.ctl file:


   @DO MINIMAL-RESTORE
   @DEASSIGN X:          or             @DISMOUNT  X:


4.3. A MULTIPLE SUB-DIRECTORY SYSTEM
4.3. A MULTIPLE SUB-DIRECTORY SYSTEM
4.3. A MULTIPLE SUB-DIRECTORY SYSTEM

  If  you  plan  to do much source modification, or a significant
number of rebuilds, or  maintain  a  compatible  multiple-machine
version  of  PSL,  or  attempt  retargeting  of  PSL, a multiple-
directory structure such as that at UTAH should be built.


  The file FULL-LOGICAL-NAMES.CMD, retrieved above should be used
as a guide to building the sub-directories. We currently  use  18
sub-directories  for  the  Common  Sources  and  DEC-20  specific
sources, and have at least an extra three for each  new  machine.
Consult  the  20-DIST.LOG  file  supplied  with the PSL tape as a
guide for the amount of space required  for  each  sub-directory.
The  current set of directories for DEC-20 PSL, the logical names
that we use,  and  rough  space  estimate  follows.    Build  the
sub-directories with a somewhat larger working space allocation.


  Now  edit  the  file  PSL:full-logical-names.cmd to reflect the
your choice of <name> along with the create-directories.ctl file.


  Also put @TAKE <name>full-logical-names.cmd in your LOGIN.CMD.


4.4. Build Sub-Directories
4.4. Build Sub-Directories
4.4. Build Sub-Directories

  Then use the system command, BUILD, to build each sub-directory
with the name Pxxx:,  as  follows.  Assistance  from  the  system
manager   may   be   required   to   permit   the   creation   of
sub-directories, and  the  appropriate  choice  of  sub-directory
parameters:
DEC-20 PSL Release                                         Page 7


    @BUILD Pxxx:
    @@PERM nnnn           ! choose appropriate size
    @@WORK wwww           ! nnnn+extra
    @@FILES-ONLY          ! Can't login
    @@GEN 2               ! Retain 1 previous version
    @@PROTECTION 777700   ! Give group access
    @@DEFAULT    777700
    @                      ! that are permitted access


  To  make  this  process easier, we have created a control file:
CREATE-DIRECTORIES.CTL that will build all of the  subdirectories
with  sizes  such  that  restoration  of  the files will succeed.
Therefore, after editing the full-logical-names.cmd file above to
reflect the correct logical names, simply DO the CTL  file  (some
systems  use MIC instead of DO, so that may be substituted in the
following examples) :


    @DO CREATE-DIRECTORIES.CTL


  This will create all of the necessary directories.


  Finally, restore the full system by DOing the  full-restore.ctl
file:


   @DO FULL-RESTORE
   @DEASSIGN X:          or             @DISMOUNT  X:


4.5. Announce the System
4.5. Announce the System
4.5. Announce the System

  Send  out  a Message to all those interested in using PSL.  The
file BBOARD.MSG is a suggested start.


  Edit  as  you  see  fit,  but  please  REMIND  people  not   to
re-distribute the PSL system and sources.


  You may also want to set the directory protection to 775200 and
limit  access  only  to those that you feel should have access at
this time.
DEC-20 PSL Release                                         Page 8


4.6. Summary of Restoration Process
4.6. Summary of Restoration Process
4.6. Summary of Restoration Process

  In summary, first retrieve the cmd and ctl files from the first
saveset  on  the  DUMPER  tape.  Then choose a single or multiple
directory system and edit the appropriate logical  name  file  to
reflect  the directory name(s).  If creating a multiple directory
system use the create-directories.ctl control file to build  each
directory.  Then run the appropriate file retrieval control file.
Finally, announce the system to any interested users.



5. REBUILDING LOADABLE MODULES
5. REBUILDING LOADABLE MODULES
5. REBUILDING LOADABLE MODULES

  Most  of the utilities, and many of the more experimental parts
of the system are kept as binary FASL files (with extensions  .b)
on  the  PL:    directory.    NMODE  is  currently the only major
sub-system that has its own set of sub-directories. In some cases
(usually large sub-systems, or sub-systems  that  share  modules)
there  are  a number of .B files, and a .LAP file that loads each
.B file in turn. The PSL LOAD function will look first for  a  .B
file,  then  a .LAP file first on the user directory, then on PL:
(both this "search" path and  the  order  of  extensions  can  be
changed).


  In  order  to  ease the task of rebuilding and modifying the .B
files, we have a small utility, BUILD.  To use BUILD for a module
you call xxxx, prepare a file called xxxx.BUILD, which has  RLISP
syntax  commands  for  loading the appropriate source files.  The
file can also have various  CompileTime  options,  including  the
loading  of  various  .B  files to set up the correct compilation
environment.


  Then run PSL:RLISP, LOAD BUILD; and finally enter BUILD  'xxxx;
this  will  do a FASLOUT to "PL:xxxx", input the xxxx.BUILD file,
and finally close the FASL file.


  The target file "PL:xxxx" is  constructed  using  the  variable
"BuildFileFormat!*", initialized in the file PU:Build.Red .


  For example, consider the contents of PU:Gsort.Build:


    CompileTime load Syslisp;
    in "gsort.red"$


  Note  that  the  SYSLISP  module is required, since some of the
DEC-20 PSL Release                                         Page 9


fast sorting functions in GSORT are written in SYSLISP mode.


  GSORT is then rebuilt by the sequence:


    PSL:RLISP
    LOAD BUILD;
    BUILD 'GSORT;
    QUIT;


  This  is  such  a  common  sequence  that  a MIC file (MIC is a
parameterized DO facility) PU:BUILD.MIC is provided, and is  used
by passing the module name to MIC, after connecting to PU:  


    @mic BUILD GSORT


  is all that is required.



6. REBUILDING THE INTERPRETER
6. REBUILDING THE INTERPRETER
6. REBUILDING THE INTERPRETER

  A running `rlisp' is required to rebuild the basic interpreter,
since  the  entire  system  is  written  in  itself.   The kernel
modules, rather than being compiled to FASL files,  are  compiled
                  _____                                     ____
to assembly code (MACRO) and linked using the system loader LINK.
                  ____ _____ _____ ___
The  command file P20C:DEC20-cross.CTL is executed to produce the
                _ _____ _____
cross compiler, S:DEC20-cross (S: should be set to an appropriate
scratch directory).  The modules in the kernel are represented by
          ___   _____                            __ ______ __  __
the files P20:*.build.    There  is  a  program  PU:kernel.sl  or
__ ______ _
PL:kernel.b which generates command files for building the kernel
                                       ___ __ ______ ___ __
when  parameterized  for  Tops-20  by  P20:20-kernel-gen.sl.  The
specific modules which are in the kernel are only listed in  this
                                   ______
file,  in the call to the function kernel.  This generates a file
____ ___          ____ _____
xxxx.CTL for each xxxx.build.


6.1. Complete Kernel Rebuild
6.1. Complete Kernel Rebuild
6.1. Complete Kernel Rebuild

  A complete rebuild is accomplished by the following  steps.  At
Utah  we  use  a <scratch> directory for some intermediate files.
Define S:   to  be  this  directory  or  some  other  appropriate
location  that  can  be  deleted  when done. Below we use @SUBMIT
xxxx.CTL to run batch jobs; on some systems, @DO xxxx.CTL can  be
used instead, or on others, @MIC xxxx.CTL may be used.


  Begin by defining S: as <scratch> or other scratch directory:
DEC-20 PSL Release                                        Page 10


      @DEFINE S: <scratch>


  Now connect to <psl.20-comp> and rebuild DEC20-CROSS.EXE:


      @CONN P20C:


      @SUBMIT DEC20-CROSS.CTL


  Copy  the  <psl.comp>BARE-PSL.SYM to 20.SYM, and regenerate the
appropriate  .CTL  files.  This   saves   the   old   20.SYM   as
PREVIOUS-20.SYM:


      @CONN P20:


      @SUBMIT P20:FRESH-KERNEL.CTL


  Rebuild  each  module  (xxxx) in turn, using its xxxx.CTL. This
creates xxxx.MAC and Dxxxx.MAC files, and assembles each to  make
xxxx.REL  and  Dxxxx.REL.    The entire set is submitted with the
file ALL-KERNEL.CTL, which submits each file in turn.  (Note that
these must be done sequentially, not simultaneously.  If you have
more than one batch stream, make sure that these are run one at a
time):


       @SUBMIT ALL-KERNEL.CTL


  Build the main module, which converts  the  accumulated  20.SYM
into heap and symbol-table initialization:


      @SUBMIT P20:MAIN.CTL


  Finally  LINK  the  xxxx.REL  and  Dxxxx.REL  files  to produce
S:BARE-PSL.EXE:


      @SUBMIT P20:PSL-LINK.CTL


  Execute and save  as  PSL.EXE,  reading  appropriate  xxxx.INIT
files  (note, each site usually customizes the PSL environment to
suit their needs, therefore we recommend that you create your own
DEC-20 PSL Release                                        Page 11


version of Make-psl.ctl to perform this task).


      @SUBMIT PDIST:MAKE-PSL.CTL


  Finally, run MAKE-RLISP.CTL as needed:


      @SUBMIT PDIST:MAKE-RLISP.CTL


  Rlisp.exe  and  Psl.exe  will  be saved on the <PSL> directory.
You now may want to delete any xxx.log files that where created.


  You may also remake, RLISPCOMP, PSLCOMP and NMODE, in a similar
manner.


        @DEL P20:*.LOG
        @DEL P20C:*.LOG


6.2. Partial or Incremental Kernel Rebuild
6.2. Partial or Incremental Kernel Rebuild
6.2. Partial or Incremental Kernel Rebuild

  Often, only a single kernel file needs to  be  changed,  and  a
complete  rebuild  is not needed. The PSL kernel building process
permits  a   (semi-)independent   rebuilding   of   modules,   by
maintaining  the  20.SYM  file to record Identifier Numbers, etc.
The 20.SYM file from the recent full-rebuild, and xxxx.INIT files
are required, as are the "xxxx.REL" and "Dxxxx.REL". The  partial
rebuild  will replace the "mmmm.REL", "Dmmmm.REL" and "mmmm.INIT"
files,  modify  "20.SYM",  and  then  rebuild  the  MAIN  module.
Assuming  that  a  recent  full  rebuild has been done, a partial
rebuild of module "mmmm", is accomplished by the following steps.


  As above, S: is required for "Scratch" space.


  Define S: as <scratch> or other scratch directory:


      @DEFINE S: <scratch> 


  Rebuild DEC20-CROSS.EXE, if needed:


      @SUBMIT P20C:DEC20-CROSS.CTL
DEC-20 PSL Release                                        Page 12


  Rebuild  the  module  (mmmm),  using its mmmm.CTL. This creates
mmmm.MAC and Dmmmm.MAC files, and assembled each to make mmmm.REL
and Dmmmm.REL.  See the file ALL-KERNEL.CTL for current modules.


      @SUBMIT P20:mmmm.CTL
        Other modules can be done after this


  Rebuild the main module, which converts the accumulated  20.SYM
into  heap  and  symbol-table  initialization:  (This step can be
omitted if  20.SYM  has  not  been  changed  by  the  incremental
recompilation.)


      @SUBMIT P20:MAIN.CTL


  Finally  LINK  the  xxxx.REL  and  Dxxxx.REL  files  to produce
S:BARE-PSL.EXE:


      @SUBMIT P20:PSL-LINK.CTL


  Execute and save  as  PSL.EXE,  reading  appropriate  xxxx.INIT
files:


      @SUBMIT PDIST:MAKE-PSL.CTL


  Finally, run MAKE-RLISP as needed:


      @SUBMIT PDIST:MAKE-RLISP.CTL


  You may also remake, RLISPCOMP, PSLCOMP and NMODE, in a similar
manner.


  Note  that  20.SYM  may  be changed slightly to reflect any new
symbols encountered, and certain generated symbols. Occasionally,
repeated building of certain modules can cause  20.SYM  to  grow,
and then a full rebuild may be required.
DEC-20 PSL Release                                        Page 13


6.3. Rebuilding RLISP.EXE from PSL.EXE
6.3. Rebuilding RLISP.EXE from PSL.EXE
6.3. Rebuilding RLISP.EXE from PSL.EXE

  The  PSL executable file, PSL.EXE, is a fairly bare system, and
is usually extended by loading appropriate  utilities,  and  then
saving  this  as  a  new  executable. We have provided RLISP.EXE,
which includes the compiler, and the RLISP parser.  RLISP.EXE  is
built from PSL.EXE by the following commands:


   @TAKE PSL:minimal-logical-names.cmd
   @PSL:PSL.EXE
   (LOAD COMPILER RLISP INIT-FILE)
            % Also LOAD any other modules that
            % should be in your "standard" system
   (SAVESYSTEM "PSL 3.1 Rlisp" "PSL:rlisp.exe" '((Read-init-file
       "rlisp")))
            % The string is the Welcome Message, the save file
            % name and the startup expression to read rlisp.init.
   (QUIT)


  We  have provided a command file, PDIST:MAKE-RLISP.CTL for this
purpose.  Edit it to reflect any modules that local usage desires
in the basic system (PRLISP, USEFUL, etc. are common choices).


  In a similar fashion, a customized PSL.EXE could be  maintained
instead  of  the  "bare"  version  we  provide. In order to avoid
destroying PSL entirely, we suggest that you maintain a  copy  of
the  supplied PSL.EXE as BARE-PSL.EXE, and customize your PSL.EXE
from it.



7. RELATIONSHIP TO PSL 3.0
7. RELATIONSHIP TO PSL 3.0
7. RELATIONSHIP TO PSL 3.0

  Even  though  this  is  the  first  version  of  PSL  for   the
DecSystem-20  that  utilizes extended addressing, it is identical
to the PSL V3.1 for the non-extended 20.  As a  new  PSL  version
3.1,  it is a complete release, and totally replaces the previous
PSL  3.0  that  underwent  limited  distribution.     The   files
__ ___ ___ ___     __ ____ ___
pd:bug-fix.log and pd:bugs.txt record many of the changes and bug
fixes that occurred since version 3.0.



8. FUTURE UPDATES
8. FUTURE UPDATES
8. FUTURE UPDATES

  It  is  currently  envisioned that future updates will still be
complete releases.  It is therefore suggested that you
DEC-20 PSL Release                                        Page 14


   a. Retain  this distribution tape in case you may have to
      compare files.

   b. Do  not  make  any  changes   on   these   distributed
      directories.  If  you must make your own bug fixes, it
      is suggested that you put the changed  files  on  some
                                    ____
      other  directories,  such  as pnew:.  They can then be
      compared with any new files  sent  out  in  subsequent
      releases.
DEC-20 PSL Release                                         Page i


                        Table of Contents
                        Table of Contents
                        Table of Contents

1. INTRODUCTION                                                 2
2. DISCLAIMER                                                   2
3. CONTENTS OF THE TAPE                                         2
4. INSTALLING PSL                                               4
     4.1. Retrieve Control Files                                5
     4.2. Create a single subdirectory                          5
     4.3. A MULTIPLE SUB-DIRECTORY SYSTEM                       6
     4.4. Build Sub-Directories                                 6
     4.5. Announce the System                                   7
     4.6. Summary of Restoration Process                        8
5. REBUILDING LOADABLE MODULES                                  8
6. REBUILDING THE INTERPRETER                                   9
     6.1. Complete Kernel Rebuild                               9
     6.2. Partial or Incremental Kernel Rebuild                11
     6.3. Rebuilding RLISP.EXE from PSL.EXE                    13
7. RELATIONSHIP TO PSL 3.0                                     13
8. FUTURE UPDATES                                              13


REDUCE Historical
REDUCE Sourceforge Project | Historical SVN Repository | GitHub Mirror | SourceHut Mirror | NotABug Mirror | Chisel Mirror | Chisel RSS ]