#ifndef lint
static char *RCSid = "$Id: term.c,v 3.26 92/03/24 22:34:41 woo Exp Locker: woo $";
#endif
/* GNUPLOT - term.c */
/*
* Copyright (C) 1986, 1987, 1990, 1991, 1992 Thomas Williams, Colin Kelley
*
* Permission to use, copy, and distribute this software and its
* documentation for any purpose with or without fee is hereby granted,
* provided that the above copyright notice appear in all copies and
* that both that copyright notice and this permission notice appear
* in supporting documentation.
*
* Permission to modify the software is granted, but not the right to
* distribute the modified code. Modifications are to be distributed
* as patches to released version.
*
* This software is provided "as is" without express or implied warranty.
*
*
* AUTHORS
*
* Original Software:
* Thomas Williams, Colin Kelley.
*
* Gnuplot 2.0 additions:
* Russell Lang, Dave Kotz, John Campbell.
*
* Gnuplot 3.0 additions:
* Gershon Elber and many others.
*
* Send your comments or suggestions to
* info-gnuplot@ames.arc.nasa.gov.
* This is a mailing list; to join it send a note to
* info-gnuplot-request@ames.arc.nasa.gov.
* Send bug reports to
* bug-gnuplot@ames.arc.nasa.gov.
*/
#include <stdio.h>
#include "plot.h"
#include "setshow.h"
#include "term.h"
#include "bitmap.h"
#ifdef NEXT
#include <stdlib.h>
#include "EpsViewer.h"
#endif /* NEXT */
/* for use by all drivers */
#define sign(x) ((x) >= 0 ? 1 : -1)
#define abs(x) ((x) >= 0 ? (x) : -(x))
#define max(a,b) ((a) > (b) ? (a) : (b))
#define min(a,b) ((a) < (b) ? (a) : (b))
BOOLEAN term_init; /* true if terminal has been initialized */
extern FILE *outfile;
extern char outstr[];
extern BOOLEAN term_init;
extern int term;
extern float xsize, ysize;
extern char input_line[];
extern struct lexical_unit token[];
extern int num_tokens, c_token;
extern struct value *const_express();
extern BOOLEAN interactive;
/*
* instead of <strings.h>
*/
extern char *strcpy();
extern int strlen(), strcmp(), strncmp();
#ifndef AMIGA_AC_5
extern double sqrt();
#endif
char *getenv();
#ifdef __TURBOC__
char *turboc_init();
#endif
#ifdef PC
void reopen_binary();
#endif
#ifdef vms
char *vms_init();
void vms_reset();
void term_mode_tek();
void term_mode_native();
void term_pasthru();
void term_nopasthru();
void reopen_binary();
void fflush_binary();
#endif
/* This is needed because the unixplot library only writes to stdout. */
#ifdef UNIXPLOT
FILE save_stdout;
#endif
int unixplot=0;
#define NICE_LINE 0
#define POINT_TYPES 6
do_point(x,y,number)
int x,y;
int number;
{
register int htic,vtic;
register struct termentry *t = &term_tbl[term];
if (number < 0) { /* do dot */
(*t->move)(x,y);
(*t->vector)(x,y);
return;
}
number %= POINT_TYPES;
htic = (t->h_tic/2); /* should be in term_tbl[] in later version */
vtic = (t->v_tic/2);
switch(number) {
case 0: /* do diamond */
(*t->move)(x-htic,y);
(*t->vector)(x,y-vtic);
(*t->vector)(x+htic,y);
(*t->vector)(x,y+vtic);
(*t->vector)(x-htic,y);
(*t->move)(x,y);
(*t->vector)(x,y);
break;
case 1: /* do plus */
(*t->move)(x-htic,y);
(*t->vector)(x-htic,y);
(*t->vector)(x+htic,y);
(*t->move)(x,y-vtic);
(*t->vector)(x,y-vtic);
(*t->vector)(x,y+vtic);
break;
case 2: /* do box */
(*t->move)(x-htic,y-vtic);
(*t->vector)(x-htic,y-vtic);
(*t->vector)(x+htic,y-vtic);
(*t->vector)(x+htic,y+vtic);
(*t->vector)(x-htic,y+vtic);
(*t->vector)(x-htic,y-vtic);
(*t->move)(x,y);
(*t->vector)(x,y);
break;
case 3: /* do X */
(*t->move)(x-htic,y-vtic);
(*t->vector)(x-htic,y-vtic);
(*t->vector)(x+htic,y+vtic);
(*t->move)(x-htic,y+vtic);
(*t->vector)(x-htic,y+vtic);
(*t->vector)(x+htic,y-vtic);
break;
case 4: /* do triangle */
(*t->move)(x,y+(4*vtic/3));
(*t->vector)(x-(4*htic/3),y-(2*vtic/3));
(*t->vector)(x+(4*htic/3),y-(2*vtic/3));
(*t->vector)(x,y+(4*vtic/3));
(*t->move)(x,y);
(*t->vector)(x,y);
break;
case 5: /* do star */
(*t->move)(x-htic,y);
(*t->vector)(x-htic,y);
(*t->vector)(x+htic,y);
(*t->move)(x,y-vtic);
(*t->vector)(x,y-vtic);
(*t->vector)(x,y+vtic);
(*t->move)(x-htic,y-vtic);
(*t->vector)(x-htic,y-vtic);
(*t->vector)(x+htic,y+vtic);
(*t->move)(x-htic,y+vtic);
(*t->vector)(x-htic,y+vtic);
(*t->vector)(x+htic,y-vtic);
break;
}
}
/*
* general point routine
*/
line_and_point(x,y,number)
int x,y,number;
{
/* temporary(?) kludge to allow terminals with bad linetypes
to make nice marks */
(*term_tbl[term].linetype)(NICE_LINE);
do_point(x,y,number);
}
/*
* general arrow routine
*/
#define ROOT2 (1.41421) /* sqrt of 2 */
do_arrow(sx, sy, ex, ey, head)
int sx,sy; /* start point */
int ex, ey; /* end point (point of arrowhead) */
BOOLEAN head;
{
register struct termentry *t = &term_tbl[term];
int len = (t->h_tic + t->v_tic)/2; /* arrowhead size = avg of tic sizes */
/* draw the line for the arrow. That's easy. */
(*t->move)(sx, sy);
(*t->vector)(ex, ey);
if (head) {
/* now draw the arrow head. */
/* we put the arrowhead marks at 45 degrees to line */
if (sx == ex) {
/* vertical line, special case */
int delta = ((float)len / ROOT2 + 0.5);
if (sy < ey)
delta = -delta; /* up arrow goes the other way */
(*t->move)(ex - delta, ey + delta);
(*t->vector)(ex,ey);
(*t->vector)(ex + delta, ey + delta);
} else {
int dx = sx - ex;
int dy = sy - ey;
double coeff = len / sqrt(2.0*((double)dx*(double)dx
+ (double)dy*(double)dy));
int x,y; /* one endpoint */
x = (int)( ex + (dx + dy) * coeff );
y = (int)( ey + (dy - dx) * coeff );
(*t->move)(x,y);
(*t->vector)(ex,ey);
x = (int)( ex + (dx - dy) * coeff );
y = (int)( ey + (dy + dx) * coeff );
(*t->vector)(x,y);
}
}
}
#ifdef DUMB /* paper or glass dumb terminal */
#include "term/dumb.trm"
#endif
#ifdef PC /* all PC types */
#include "term/pc.trm"
#endif
/*
all TEK types (TEK,BITGRAPH,KERMIT,VTTEK,SELANAR) are ifdef'd in tek.trm,
but most require various TEK routines. Hence TEK must be defined for
the others to compile.
*/
#ifdef BITGRAPH
# ifndef TEK
# define TEK
# endif
#endif
#ifdef SELENAR
# ifndef TEK
# define TEK
# endif
#endif
#ifdef KERMIT
# ifndef TEK
# define TEK
# endif
#endif
#ifdef LN03P
# ifndef TEK
# define TEK
# endif
#endif
#ifdef VTTEK
# ifndef TEK
# define TEK
# endif
#endif
#ifdef T410X /* Tektronix 4106, 4107, 4109 and 420x terminals */
#include "term/t410x.trm"
#endif
#ifdef TEK /* all TEK types, TEK, BBN, SELANAR, KERMIT, VTTEK */
#include "term/tek.trm"
#endif
#ifdef EPSONP /* bit map types, EPSON, NEC, PROPRINTER, STAR Color */
#include "term/epson.trm"
#endif
#ifdef HPLJII /* HP LaserJet II */
#include "term/hpljii.trm"
#endif
#ifdef HPLJIII /* HP LaserJet III in HPGL mode */
# ifndef HPGL
# define HPGL
# endif
#endif
#ifdef FIG /* Fig 1.4FS Interactive graphics program */
#include "term/fig.trm"
#include "term/bigfig.trm"
#endif
#ifdef GPR /* Apollo Graphics Primitive Resource (fixed-size window) */
#include "term/gpr.trm"
#endif /* GPR */
#ifdef APOLLO /* Apollo Graphics Primitive Resource (resizable window) */
#include "term/apollo.trm"
#endif /* APOLLO */
#ifdef IMAGEN /* IMAGEN printer */
#include "term/imagen.trm"
#endif
#ifdef EEPIC /* EEPIC (LATEX) type */
#include "term/eepic.trm"
# ifndef LATEX
# define LATEX
# endif
#endif
#ifdef EMTEX /* EMTEX (LATEX for PC) type */
# ifndef LATEX
# define LATEX
# endif
#endif
#ifdef LATEX /* LATEX type */
#include "term/latex.trm"
#endif
#ifdef PBM /* PBMPLUS portable bitmap */
#include "term/pbm.trm"
#endif
#ifdef POSTSCRIPT /* POSTSCRIPT type */
#include "term/post.trm"
#endif
#ifdef PRESCRIBE /* PRESCRIBE type */
#include "term/kyo.trm"
#endif
#ifdef UNIXPC /* unix-PC ATT 7300 or 3b1 machine */
#include "term/unixpc.trm"
#endif /* UNIXPC */
#ifdef AED
#include "term/aed.trm"
#endif /* AED */
#ifdef AIFM
#include "term/ai.trm"
#endif /* AIFM */
#ifdef CGI
#include "term/cgi.trm"
#endif /* CGI */
#ifdef HP2648
/* also works for HP2647 */
#include "term/hp2648.trm"
#endif /* HP2648 */
#ifdef HP26
#include "term/hp26.trm"
#endif /* HP26 */
#ifdef HP75
#ifndef HPGL
#define HPGL
#endif
#endif
/* HPGL - includes HP75 and HPLJIII in HPGL mode */
#ifdef HPGL
#include "term/hpgl.trm"
#endif /* HPGL */
/* Roland DXY800A plotter driver by Martin Yii, eln557h@monu3.OZ
and Russell Lang, rjl@monu1.cc.monash.oz */
#ifdef DXY800A
#include "term/dxy.trm"
#endif /* DXY800A */
#ifdef IRIS4D
#include "term/iris4d.trm"
#endif /* IRIS4D */
#ifdef NEXT
#include "term/next.trm"
#endif /* NEXT */
#ifdef QMS
#include "term/qms.trm"
#endif /* QMS */
#ifdef REGIS
#include "term/regis.trm"
#endif /* REGIS */
#ifdef SUN
#include "term/sun.trm"
#endif /* SUN */
#ifdef VWS
#include "term/vws.trm"
#endif /* VWS */
#ifdef V384
#include "term/v384.trm"
#endif /* V384 */
#ifdef UNIXPLOT
#include "term/unixplot.trm"
#endif /* UNIXPLOT */
#ifdef X11
#include "term/x11.trm"
#endif /* X11 */
#ifdef DXF
#include "term/dxf.trm"
#endif /* DXF */
#ifdef AMIGASCREEN
#include "term/amiga.trm"
#endif /* AMIGASCREEN */
/* Dummy functions for unavailable features */
/* change angle of text. 0 is horizontal left to right.
* 1 is vertical bottom to top (90 deg rotate)
*/
static int null_text_angle()
{
return FALSE ; /* can't be done */
}
/* change justification of text.
* modes are LEFT (flush left), CENTRE (centred), RIGHT (flush right)
*/
static int null_justify_text()
{
return FALSE ; /* can't be done */
}
/* Change scale of plot.
* Parameters are x,y scaling factors for this plot.
* Some terminals (eg latex) need to do scaling themselves.
*/
static int null_scale()
{
return FALSE ; /* can't be done */
}
static int do_scale()
{
return TRUE ; /* can be done */
}
options_null()
{
term_options[0] = '\0'; /* we have no options */
}
static UNKNOWN_null()
{
}
/*
* term_tbl[] contains an entry for each terminal. "unknown" must be the
* first, since term is initialized to 0.
*/
struct termentry term_tbl[] = {
{"unknown", "Unknown terminal type - not a plotting device",
100, 100, 1, 1,
1, 1, options_null, UNKNOWN_null, UNKNOWN_null,
UNKNOWN_null, null_scale, UNKNOWN_null, UNKNOWN_null, UNKNOWN_null,
UNKNOWN_null, UNKNOWN_null, null_text_angle,
null_justify_text, UNKNOWN_null, UNKNOWN_null}
,{"table", "Dump ASCII table of X Y [Z] values to output",
100, 100, 1, 1,
1, 1, options_null, UNKNOWN_null, UNKNOWN_null,
UNKNOWN_null, null_scale, UNKNOWN_null, UNKNOWN_null, UNKNOWN_null,
UNKNOWN_null, UNKNOWN_null, null_text_angle,
null_justify_text, UNKNOWN_null, UNKNOWN_null}
#ifdef AMIGASCREEN
,{"amiga", "Amiga Custom Screen",
AMIGA_XMAX, AMIGA_YMAX, AMIGA_VCHAR, AMIGA_HCHAR,
AMIGA_VTIC, AMIGA_HTIC, options_null, AMIGA_init, AMIGA_reset,
AMIGA_text, null_scale, AMIGA_graphics, AMIGA_move, AMIGA_vector,
AMIGA_linetype, AMIGA_put_text, null_text_angle,
AMIGA_justify_text, do_point, do_arrow}
#endif
#ifdef DUMB
,{"dumb", "printer or glass dumb terminal",
DUMB_XMAX, DUMB_YMAX, 1, 1,
1, 1, DUMB_options, DUMB_init, DUMB_reset,
DUMB_text, null_scale, DUMB_graphics, DUMB_move, DUMB_vector,
DUMB_linetype, DUMB_put_text, null_text_angle,
null_justify_text, DUMB_point, DUMB_arrow}
#endif
#ifdef PC
#ifdef __TURBOC__
,{"egalib", "IBM PC/Clone with EGA graphics board",
EGALIB_XMAX, EGALIB_YMAX, EGALIB_VCHAR, EGALIB_HCHAR,
EGALIB_VTIC, EGALIB_HTIC, options_null, EGALIB_init, EGALIB_reset,
EGALIB_text, null_scale, EGALIB_graphics, EGALIB_move, EGALIB_vector,
EGALIB_linetype, EGALIB_put_text, EGALIB_text_angle,
EGALIB_justify_text, do_point, do_arrow}
,{"vgalib", "IBM PC/Clone with VGA graphics board",
VGA_XMAX, VGA_YMAX, VGA_VCHAR, VGA_HCHAR,
VGA_VTIC, VGA_HTIC, options_null, VGA_init, VGA_reset,
VGA_text, null_scale, VGA_graphics, VGA_move, VGA_vector,
VGA_linetype, VGA_put_text, VGA_text_angle,
VGA_justify_text, do_point, do_arrow}
,{"vgamono", "IBM PC/Clone with VGA Monochrome graphics board",
VGA_XMAX, VGA_YMAX, VGA_VCHAR, VGA_HCHAR,
VGA_VTIC, VGA_HTIC, options_null, VGA_init, VGA_reset,
VGA_text, null_scale, VGA_graphics, VGA_move, VGA_vector,
VGAMONO_linetype, VGA_put_text, VGA_text_angle,
VGA_justify_text, line_and_point, do_arrow}
,{"svga", "IBM PC/Clone with Super VGA graphics board",
SVGA_XMAX, SVGA_YMAX, SVGA_VCHAR, SVGA_HCHAR,
SVGA_VTIC, SVGA_HTIC, options_null, SVGA_init, SVGA_reset,
SVGA_text, null_scale, SVGA_graphics, SVGA_move, SVGA_vector,
SVGA_linetype, SVGA_put_text, SVGA_text_angle,
SVGA_justify_text, do_point, do_arrow}
,{"mcga", "IBM PC/Clone with MCGA graphics board",
MCGA_XMAX, MCGA_YMAX, MCGA_VCHAR, MCGA_HCHAR,
MCGA_VTIC, MCGA_HTIC, options_null, MCGA_init, MCGA_reset,
MCGA_text, null_scale, MCGA_graphics, MCGA_move, MCGA_vector,
MCGA_linetype, MCGA_put_text, MCGA_text_angle,
MCGA_justify_text, line_and_point, do_arrow}
,{"cga", "IBM PC/Clone with CGA graphics board",
CGA_XMAX, CGA_YMAX, CGA_VCHAR, CGA_HCHAR,
CGA_VTIC, CGA_HTIC, options_null, CGA_init, CGA_reset,
CGA_text, null_scale, CGA_graphics, CGA_move, CGA_vector,
CGA_linetype, CGA_put_text, MCGA_text_angle,
CGA_justify_text, line_and_point, do_arrow}
,{"hercules", "IBM PC/Clone with Hercules graphics board",
HERC_XMAX, HERC_YMAX, HERC_VCHAR, HERC_HCHAR,
HERC_VTIC, HERC_HTIC, options_null, HERC_init, HERC_reset,
HERC_text, null_scale, HERC_graphics, HERC_move, HERC_vector,
HERC_linetype, HERC_put_text, MCGA_text_angle,
HERC_justify_text, line_and_point, do_arrow}
#ifdef ATT6300
,{"att", "IBM PC/Clone with AT&T 6300 graphics board",
ATT_XMAX, ATT_YMAX, ATT_VCHAR, ATT_HCHAR,
ATT_VTIC, ATT_HTIC, options_null, ATT_init, ATT_reset,
ATT_text, null_scale, ATT_graphics, ATT_move, ATT_vector,
ATT_linetype, ATT_put_text, ATT_text_angle,
ATT_justify_text, line_and_point, do_arrow}
#endif
#else /* TURBO */
,{"cga", "IBM PC/Clone with CGA graphics board",
CGA_XMAX, CGA_YMAX, CGA_VCHAR, CGA_HCHAR,
CGA_VTIC, CGA_HTIC, options_null, CGA_init, CGA_reset,
CGA_text, null_scale, CGA_graphics, CGA_move, CGA_vector,
CGA_linetype, CGA_put_text, CGA_text_angle,
null_justify_text, line_and_point, do_arrow}
,{"egabios", "IBM PC/Clone with EGA graphics board (BIOS)",
EGA_XMAX, EGA_YMAX, EGA_VCHAR, EGA_HCHAR,
EGA_VTIC, EGA_HTIC, options_null, EGA_init, EGA_reset,
EGA_text, null_scale, EGA_graphics, EGA_move, EGA_vector,
EGA_linetype, EGA_put_text, EGA_text_angle,
null_justify_text, do_point, do_arrow}
,{"vgabios", "IBM PC/Clone with VGA graphics board (BIOS)",
VGA_XMAX, VGA_YMAX, VGA_VCHAR, VGA_HCHAR,
VGA_VTIC, VGA_HTIC, options_null, VGA_init, VGA_reset,
VGA_text, null_scale, VGA_graphics, VGA_move, VGA_vector,
VGA_linetype, VGA_put_text, VGA_text_angle,
null_justify_text, do_point, do_arrow}
#ifdef EGALIB
,{"egalib", "IBM PC/Clone with EGA graphics board (LIB)",
EGALIB_XMAX, EGALIB_YMAX, EGALIB_VCHAR, EGALIB_HCHAR,
EGALIB_VTIC, EGALIB_HTIC, options_null, EGALIB_init, EGALIB_reset,
EGALIB_text, null_scale, EGALIB_graphics, EGALIB_move, EGALIB_vector,
EGALIB_linetype, EGALIB_put_text, null_text_angle,
null_justify_text, do_point, do_arrow}
#endif
#ifdef HERCULES
,{"hercules", "IBM PC/Clone with Hercules graphics board",
HERC_XMAX, HERC_YMAX, HERC_VCHAR, HERC_HCHAR,
HERC_VTIC, HERC_HTIC, options_null, HERC_init, HERC_reset,
HERC_text, null_scale, HERC_graphics, HERC_move, HERC_vector,
HERC_linetype, HERC_put_text, HERC_text_angle,
null_justify_text, line_and_point, do_arrow}
#endif /* HERCULES */
#ifdef ATT6300
,{"att", "AT&T PC/6300 graphics",
ATT_XMAX, ATT_YMAX, ATT_VCHAR, ATT_HCHAR,
ATT_VTIC, ATT_HTIC, options_null, ATT_init, ATT_reset,
ATT_text, null_scale, ATT_graphics, ATT_move, ATT_vector,
ATT_linetype, ATT_put_text, ATT_text_angle,
null_justify_text, line_and_point, do_arrow}
#endif
#ifdef CORONA
,{"corona325", "Corona graphics ???",
COR_XMAX, COR_YMAX, COR_VCHAR, COR_HCHAR,
COR_VTIC, COR_HTIC, options_null, COR_init, COR_reset,
COR_text, null_scale, COR_graphics, COR_move, COR_vector,
COR_linetype, COR_put_text, COR_text_angle,
null_justify_text, line_and_point, do_arrow}
#endif /* CORONA */
#endif /* TURBO */
#endif /* PC */
#ifdef AED
,{"aed512", "AED 512 Terminal",
AED5_XMAX, AED_YMAX, AED_VCHAR, AED_HCHAR,
AED_VTIC, AED_HTIC, options_null, AED_init, AED_reset,
AED_text, null_scale, AED_graphics, AED_move, AED_vector,
AED_linetype, AED_put_text, null_text_angle,
null_justify_text, do_point, do_arrow}
,{"aed767", "AED 767 Terminal",
AED_XMAX, AED_YMAX, AED_VCHAR, AED_HCHAR,
AED_VTIC, AED_HTIC, options_null, AED_init, AED_reset,
AED_text, null_scale, AED_graphics, AED_move, AED_vector,
AED_linetype, AED_put_text, null_text_angle,
null_justify_text, do_point, do_arrow}
#endif
#ifdef AIFM
,{"aifm", "Adobe Illustrator 3.0 Format",
AI_XMAX, AI_YMAX, AI_VCHAR, AI_HCHAR,
AI_VTIC, AI_HTIC, AI_options, AI_init, AI_reset,
AI_text, null_scale, AI_graphics, AI_move, AI_vector,
AI_linetype, AI_put_text, AI_text_angle,
AI_justify_text, do_point, do_arrow}
#endif
#ifdef APOLLO
,{"apollo", "Apollo Graphics Primitive Resource, rescaling of subsequent plots after window resizing",
0, 0, 0, 0, /* APOLLO_XMAX, APOLLO_YMAX, APOLLO_VCHAR, APOLLO_HCHAR, are filled in at run-time */
APOLLO_VTIC, APOLLO_HTIC, options_null, APOLLO_init, APOLLO_reset,
APOLLO_text, null_scale, APOLLO_graphics, APOLLO_move, APOLLO_vector,
APOLLO_linetype, APOLLO_put_text, APOLLO_text_angle,
APOLLO_justify_text, line_and_point, do_arrow}
#endif
#ifdef GPR
,{"gpr", "Apollo Graphics Primitive Resource, fixed-size window",
GPR_XMAX, GPR_YMAX, GPR_VCHAR, GPR_HCHAR,
GPR_VTIC, GPR_HTIC, options_null, GPR_init, GPR_reset,
GPR_text, null_scale, GPR_graphics, GPR_move, GPR_vector,
GPR_linetype, GPR_put_text, GPR_text_angle,
GPR_justify_text, line_and_point, do_arrow}
#endif
#ifdef BITGRAPH
,{"bitgraph", "BBN Bitgraph Terminal",
BG_XMAX,BG_YMAX,BG_VCHAR, BG_HCHAR,
BG_VTIC, BG_HTIC, options_null, BG_init, BG_reset,
BG_text, null_scale, BG_graphics, BG_move, BG_vector,
BG_linetype, BG_put_text, null_text_angle,
null_justify_text, line_and_point, do_arrow}
#endif
#ifdef CGI
,{"cgi", "SCO CGI drivers (requires CGIDISP or CGIPRNT env variable)",
CGI_XMAX, CGI_YMAX, 0, 0,
CGI_VTIC, 0, options_null, CGI_init, CGI_reset,
CGI_text, null_scale, CGI_graphics, CGI_move, CGI_vector,
CGI_linetype, CGI_put_text, CGI_text_angle,
CGI_justify_text, CGI_point, do_arrow}
,{"hcgi", "SCO CGI drivers (hardcopy, requires CGIPRNT env variable)",
CGI_XMAX, CGI_YMAX, 0, 0,
CGI_VTIC, 0, options_null, HCGI_init, CGI_reset,
CGI_text, null_scale, CGI_graphics, CGI_move, CGI_vector,
CGI_linetype, CGI_put_text, CGI_text_angle,
CGI_justify_text, CGI_point, do_arrow}
#endif
#ifdef DXF
,{"dxf", "dxf-file for AutoCad (default size 120x80)",
DXF_XMAX,DXF_YMAX,DXF_VCHAR, DXF_HCHAR,
DXF_VTIC, DXF_HTIC, options_null,DXF_init, DXF_reset,
DXF_text, null_scale, DXF_graphics, DXF_move, DXF_vector,
DXF_linetype, DXF_put_text, DXF_text_angle,
DXF_justify_text, do_point, do_arrow}
#endif
#ifdef DXY800A
,{"dxy800a", "Roland DXY800A plotter",
DXY_XMAX, DXY_YMAX, DXY_VCHAR, DXY_HCHAR,
DXY_VTIC, DXY_HTIC, options_null, DXY_init, DXY_reset,
DXY_text, null_scale, DXY_graphics, DXY_move, DXY_vector,
DXY_linetype, DXY_put_text, DXY_text_angle,
null_justify_text, do_point, do_arrow}
#endif
#ifdef EEPIC
,{"eepic", "EEPIC -- extended LaTeX picture environment",
EEPIC_XMAX, EEPIC_YMAX, EEPIC_VCHAR, EEPIC_HCHAR,
EEPIC_VTIC, EEPIC_HTIC, options_null, EEPIC_init, EEPIC_reset,
EEPIC_text, EEPIC_scale, EEPIC_graphics, EEPIC_move, EEPIC_vector,
EEPIC_linetype, EEPIC_put_text, EEPIC_text_angle,
EEPIC_justify_text, EEPIC_point, EEPIC_arrow}
#endif
#ifdef EMTEX
,{"emtex", "LATEX picture environment with emTeX specials",
LATEX_XMAX, LATEX_YMAX, LATEX_VCHAR, LATEX_HCHAR,
LATEX_VTIC, LATEX_HTIC, options_null, EMTEX_init, EMTEX_reset,
EMTEX_text, LATEX_scale, LATEX_graphics, LATEX_move, LATEX_vector,
LATEX_linetype, LATEX_put_text, LATEX_text_angle,
LATEX_justify_text, LATEX_point, LATEX_arrow}
#endif
#ifdef EPS60
,{"epson_60dpi", "Epson-style 60-dot per inch printers",
EPS60XMAX, EPS60YMAX, EPSONVCHAR, EPSONHCHAR,
EPSONVTIC, EPSONHTIC, options_null, EPSONinit, EPSONreset,
EPS60text, null_scale, EPS60graphics, EPSONmove, EPSONvector,
EPSONlinetype, EPSONput_text, EPSON_text_angle,
null_justify_text, do_point, do_arrow}
#endif
#ifdef EPSONP
,{"epson_lx800", "Epson LX-800, Star NL-10, NX-1000, PROPRINTER ...",
EPSONXMAX, EPSONYMAX, EPSONVCHAR, EPSONHCHAR,
EPSONVTIC, EPSONHTIC, options_null, EPSONinit, EPSONreset,
EPSONtext, null_scale, EPSONgraphics, EPSONmove, EPSONvector,
EPSONlinetype, EPSONput_text, EPSON_text_angle,
null_justify_text, line_and_point, do_arrow}
#endif
#ifdef FIG
,{"fig", "FIG graphics language: SunView or X graphics editor",
FIG_XMAX, FIG_YMAX, FIG_VCHAR, FIG_HCHAR,
FIG_VTIC, FIG_HTIC, options_null, FIG_init, FIG_reset,
FIG_text, null_scale, FIG_graphics, FIG_move, FIG_vector,
FIG_linetype, FIG_put_text, FIG_text_angle,
FIG_justify_text, do_point, FIG_arrow}
,{"bfig", "FIG graphics language: SunView or X graphics editor. Large Graph",
BFIG_XMAX, BFIG_YMAX, BFIG_VCHAR, BFIG_HCHAR,
BFIG_VTIC, BFIG_HTIC, options_null, FIG_init, FIG_reset,
FIG_text, null_scale, FIG_graphics, FIG_move, BFIG_vector,
FIG_linetype, BFIG_put_text, FIG_text_angle,
FIG_justify_text, do_point, BFIG_arrow}
#endif
#ifdef HP26
,{"hp2623A", "HP2623A and maybe others",
HP26_XMAX, HP26_YMAX, HP26_VCHAR, HP26_HCHAR,
HP26_VTIC, HP26_HTIC, options_null, HP26_init, HP26_reset,
HP26_text, null_scale, HP26_graphics, HP26_move, HP26_vector,
HP26_linetype, HP26_put_text, null_text_angle,
null_justify_text, line_and_point, do_arrow}
#endif
#ifdef HP2648
,{"hp2648", "HP2648 and HP2647",
HP2648XMAX, HP2648YMAX, HP2648VCHAR, HP2648HCHAR,
HP2648VTIC, HP2648HTIC, options_null, HP2648init, HP2648reset,
HP2648text, null_scale, HP2648graphics, HP2648move, HP2648vector,
HP2648linetype, HP2648put_text, HP2648_text_angle,
null_justify_text, line_and_point, do_arrow}
#endif
#ifdef HP75
,{"hp7580B", "HP7580, and probably other HPs (4 pens)",
HPGL_XMAX, HPGL_YMAX, HPGL_VCHAR, HPGL_HCHAR,
HPGL_VTIC, HPGL_HTIC, options_null, HPGL_init, HPGL_reset,
HPGL_text, null_scale, HPGL_graphics, HPGL_move, HPGL_vector,
HP75_linetype, HPGL_put_text, HPGL_text_angle,
null_justify_text, do_point, do_arrow}
#endif
#ifdef HPGL
,{"hpgl", "HP7475 and (hopefully) lots of others (6 pens)",
HPGL_XMAX, HPGL_YMAX, HPGL_VCHAR, HPGL_HCHAR,
HPGL_VTIC, HPGL_HTIC, options_null, HPGL_init, HPGL_reset,
HPGL_text, null_scale, HPGL_graphics, HPGL_move, HPGL_vector,
HPGL_linetype, HPGL_put_text, HPGL_text_angle,
null_justify_text, do_point, do_arrow}
#endif
#ifdef HPLJII
,{"hpljii", "HP Laserjet series II, [75 100 150 300]",
HPLJII_75PPI_XMAX, HPLJII_75PPI_YMAX, HPLJII_75PPI_VCHAR,
HPLJII_75PPI_HCHAR, HPLJII_75PPI_VTIC, HPLJII_75PPI_HTIC, HPLJIIoptions,
HPLJIIinit, HPLJIIreset, HPLJIItext, null_scale,
HPLJIIgraphics, HPLJIImove, HPLJIIvector, HPLJIIlinetype,
HPLJIIput_text, HPLJIItext_angle, null_justify_text, line_and_point,
do_arrow}
,{"hpdj", "HP DeskJet 500, [75 100 150 300]",
HPLJII_75PPI_XMAX, HPLJII_75PPI_YMAX, HPLJII_75PPI_VCHAR,
HPLJII_75PPI_HCHAR, HPLJII_75PPI_VTIC, HPLJII_75PPI_HTIC, HPLJIIoptions,
HPLJIIinit, HPLJIIreset, HPDJtext, null_scale,
HPDJgraphics, HPLJIImove, HPLJIIvector, HPLJIIlinetype,
HPDJput_text, HPDJtext_angle, null_justify_text, line_and_point,
do_arrow}
#endif
#ifdef HPLJIII
,{"pcl5_port", "HP laserjet iii (using HPGL plot vectors), portrait mode",
PCL_YMAX, PCL_XMAX, PCL_VCHAR, PCL_HCHAR,
PCL_VTIC, PCL_HTIC, options_null, PCL_PORT_init, PCL_reset,
PCL_text, null_scale, PCL_graphics, HPGL_move, HPGL_vector,
HPGL_linetype, PCL_put_text, HPGL_text_angle,
null_justify_text, do_point, do_arrow}
,{"pcl5_land", "HP laserjet iii (using HPGL plot vectors), landscape mode",
PCL_XMAX, PCL_YMAX, PCL_VCHAR, PCL_HCHAR,
PCL_VTIC, PCL_HTIC, options_null, PCL_LAND_init, PCL_reset,
PCL_text, null_scale, PCL_graphics, HPGL_move, HPGL_vector,
HPGL_linetype, PCL_put_text, HPGL_text_angle,
null_justify_text, do_point, do_arrow}
#endif
#ifdef IMAGEN
,{"imagen", "Imagen laser printer",
IMAGEN_XMAX, IMAGEN_YMAX, IMAGEN_VCHAR, IMAGEN_HCHAR,
IMAGEN_VTIC, IMAGEN_HTIC, options_null, IMAGEN_init, IMAGEN_reset,
IMAGEN_text, null_scale, IMAGEN_graphics, IMAGEN_move,
IMAGEN_vector, IMAGEN_linetype, IMAGEN_put_text, IMAGEN_text_angle,
IMAGEN_justify_text, line_and_point, do_arrow}
#endif
#ifdef IRIS4D
,{"iris4d", "Silicon Graphics IRIS 4D Series Computer",
IRIS4D_XMAX, IRIS4D_YMAX, IRIS4D_VCHAR, IRIS4D_HCHAR,
IRIS4D_VTIC, IRIS4D_HTIC, IRIS4D_options, IRIS4D_init, IRIS4D_reset,
IRIS4D_text, null_scale, IRIS4D_graphics, IRIS4D_move, IRIS4D_vector,
IRIS4D_linetype, IRIS4D_put_text, null_text_angle,
null_justify_text, do_point, do_arrow}
#endif
#ifdef KERMIT
,{"kc_tek40xx", "Kermit-MS tek40xx terminal emulator - color",
TEK40XMAX,TEK40YMAX,TEK40VCHAR, KTEK40HCHAR,
TEK40VTIC, TEK40HTIC, options_null, TEK40init, KTEK40reset,
KTEK40Ctext, null_scale, KTEK40graphics, TEK40move, TEK40vector,
KTEK40Clinetype, TEK40put_text, null_text_angle,
null_justify_text, do_point, do_arrow}
,{"km_tek40xx", "Kermit-MS tek40xx terminal emulator - monochrome",
TEK40XMAX,TEK40YMAX,TEK40VCHAR, KTEK40HCHAR,
TEK40VTIC, TEK40HTIC, options_null, TEK40init, KTEK40reset,
TEK40text, null_scale, KTEK40graphics, TEK40move, TEK40vector,
KTEK40Mlinetype, TEK40put_text, null_text_angle,
null_justify_text, line_and_point, do_arrow}
#endif
#ifdef LATEX
,{"latex", "LaTeX picture environment",
LATEX_XMAX, LATEX_YMAX, LATEX_VCHAR, LATEX_HCHAR,
LATEX_VTIC, LATEX_HTIC, options_null, LATEX_init, LATEX_reset,
LATEX_text, LATEX_scale, LATEX_graphics, LATEX_move, LATEX_vector,
LATEX_linetype, LATEX_put_text, LATEX_text_angle,
LATEX_justify_text, LATEX_point, LATEX_arrow}
#endif
#ifdef LN03P
,{"ln03", "LN03-plus laser printer in tektronix mode",
TEK40XMAX, TEK40YMAX, TEK40VCHAR, TEK40HCHAR,
TEK40VTIC, TEK40HTIC, options_null, LN03Pinit, LN03Preset,
TEK40text, null_scale, TEK40graphics, TEK40move, TEK40vector,
TEK40linetype, TEK40put_text, null_text_angle,
null_justify_text, line_and_point, do_arrow}
#endif
#ifdef NEC
,{"nec_cp6m", "NEC printer CP6, Epson LQ-800 Monochrome",
NECXMAX, NECYMAX, NECVCHAR, NECHCHAR,
NECVTIC, NECHTIC, options_null, NECinit, NECreset,
NECtext, null_scale, NECMgraphics, NECmove, NECvector,
NECMlinetype, NECput_text, NEC_text_angle,
null_justify_text, line_and_point, do_arrow}
,{"nec_cp6c", "NEC printer CP6 Color",
NECXMAX, NECYMAX, NECVCHAR, NECHCHAR,
NECVTIC, NECHTIC, options_null, NECinit, NECreset,
NECtext, null_scale, NECCgraphics, NECmove, NECvector,
NECClinetype, NECput_text, NEC_text_angle,
null_justify_text, do_point, do_arrow}
,{"nec_cp6d", "NEC printer CP6, Epson LQ-800 Draft monochrome",
NECXMAX, NECYMAX, NECVCHAR, NECHCHAR,
NECVTIC, NECHTIC, options_null, NECinit, NECreset,
NECdraft_text, null_scale, NECMgraphics, NECmove, NECvector,
NECMlinetype, NECput_text, NEC_text_angle,
null_justify_text, line_and_point, do_arrow}
#endif
#ifdef NEXT
,{"next", "NeXTstep window system",
NEXT_XMAX, NEXT_YMAX, NEXT_VCHAR, NEXT_HCHAR,
NEXT_VTIC, NEXT_HTIC, NEXT_options, NEXT_init, NEXT_reset,
NEXT_text, do_scale, NEXT_graphics, NEXT_move, NEXT_vector,
NEXT_linetype, NEXT_put_text, NEXT_text_angle,
NEXT_justify_text, NEXT_point, do_arrow}
#endif /* The postscript driver with NXImage displaying the postscript on screen */
#ifdef PBM
,{"pbm", "Portable bitmap",
PBM_XMAX, PBM_YMAX, PBM_VCHAR,
PBM_HCHAR, PBM_VTIC, PBM_HTIC, PBMoptions,
PBMinit, PBMreset, PBMtext, null_scale,
PBMgraphics, PBMmove, PBMvector, PBMlinetype,
PBMput_text, PBMtext_angle, null_justify_text, line_and_point,
do_arrow}
,{"pgm", "Portable graymap",
PBM_XMAX, PBM_YMAX, PBM_VCHAR,
PBM_HCHAR, PBM_VTIC, PBM_HTIC, PBMoptions,
PBMinit, PBMreset, PGMtext, null_scale,
PGMgraphics, PBMmove, PBMvector, PGMlinetype,
PBMput_text, PBMtext_angle, null_justify_text, do_point,
do_arrow}
,{"ppm", "Portable pixmap (color)",
PBM_XMAX, PBM_YMAX, PBM_VCHAR,
PBM_HCHAR, PBM_VTIC, PBM_HTIC, PBMoptions,
PBMinit, PBMreset, PPMtext, null_scale,
PPMgraphics, PBMmove, PBMvector, PPMlinetype,
PBMput_text, PBMtext_angle, null_justify_text, do_point,
do_arrow}
#endif
#ifdef POSTSCRIPT
,{"postscript", "PostScript graphics language [mode \042fontname\042 font_size]",
PS_XMAX, PS_YMAX, PS_VCHAR, PS_HCHAR,
PS_VTIC, PS_HTIC, PS_options, PS_init, PS_reset,
PS_text, null_scale, PS_graphics, PS_move, PS_vector,
PS_linetype, PS_put_text, PS_text_angle,
PS_justify_text, PS_point, do_arrow}
#endif
#ifdef PRESCRIBE
,{"prescribe", "Prescribe - for the Kyocera Laser Printer",
PRE_XMAX, PRE_YMAX, PRE_VCHAR, PRE_HCHAR,
PRE_VTIC, PRE_HTIC, options_null, PRE_init, PRE_reset,
PRE_text, null_scale, PRE_graphics, PRE_move, PRE_vector,
PRE_linetype, PRE_put_text, null_text_angle,
PRE_justify_text, line_and_point, do_arrow}
,{"kyo", "Kyocera Laser Printer with Courier font",
PRE_XMAX, PRE_YMAX, KYO_VCHAR, KYO_HCHAR,
PRE_VTIC, PRE_HTIC, options_null, KYO_init, PRE_reset,
PRE_text, null_scale, PRE_graphics, PRE_move, PRE_vector,
PRE_linetype, PRE_put_text, null_text_angle,
PRE_justify_text, line_and_point, do_arrow}
#endif /* PRESCRIBE */
#ifdef QMS
,{"qms", "QMS/QUIC Laser printer (also Talaris 1200 and others)",
QMS_XMAX,QMS_YMAX, QMS_VCHAR, QMS_HCHAR,
QMS_VTIC, QMS_HTIC, options_null, QMS_init,QMS_reset,
QMS_text, null_scale, QMS_graphics, QMS_move, QMS_vector,
QMS_linetype,QMS_put_text, null_text_angle,
null_justify_text, line_and_point, do_arrow}
#endif
#ifdef REGIS
,{"regis", "REGIS graphics language",
REGISXMAX, REGISYMAX, REGISVCHAR, REGISHCHAR,
REGISVTIC, REGISHTIC, options_null, REGISinit, REGISreset,
REGIStext, null_scale, REGISgraphics, REGISmove, REGISvector,
REGISlinetype, REGISput_text, REGIStext_angle,
null_justify_text, line_and_point, do_arrow}
#endif
#ifdef SELANAR
,{"selanar", "Selanar",
TEK40XMAX, TEK40YMAX, TEK40VCHAR, TEK40HCHAR,
TEK40VTIC, TEK40HTIC, options_null, SEL_init, SEL_reset,
SEL_text, null_scale, SEL_graphics, TEK40move, TEK40vector,
TEK40linetype, TEK40put_text, null_text_angle,
null_justify_text, line_and_point, do_arrow}
#endif
#ifdef STARC
,{"starc", "Star Color Printer",
STARCXMAX, STARCYMAX, STARCVCHAR, STARCHCHAR,
STARCVTIC, STARCHTIC, options_null, STARCinit, STARCreset,
STARCtext, null_scale, STARCgraphics, STARCmove, STARCvector,
STARClinetype, STARCput_text, STARC_text_angle,
null_justify_text, line_and_point, do_arrow}
#endif
#ifdef SUN
,{"sun", "SunView window system",
SUN_XMAX, SUN_YMAX, SUN_VCHAR, SUN_HCHAR,
SUN_VTIC, SUN_HTIC, options_null, SUN_init, SUN_reset,
SUN_text, null_scale, SUN_graphics, SUN_move, SUN_vector,
SUN_linetype, SUN_put_text, null_text_angle,
SUN_justify_text, line_and_point, do_arrow}
#endif
#ifdef VWS
,{"VWS", "VAX Windowing System (UIS)",
VWS_XMAX, VWS_YMAX, VWS_VCHAR, VWS_HCHAR,
VWS_VTIC, VWS_HTIC, options_null, VWS_init, VWS_reset,
VWS_text, null_scale, VWS_graphics, VWS_move, VWS_vector,
VWS_linetype, VWS_put_text, VWS_text_angle,
VWS_justify_text, do_point, do_arrow}
#endif
#ifdef TANDY60
,{"tandy_60dpi", "Tandy DMP-130 series 60-dot per inch graphics",
EPS60XMAX, EPS60YMAX, EPSONVCHAR, EPSONHCHAR,
EPSONVTIC, EPSONHTIC, options_null, EPSONinit, EPSONreset,
TANDY60text, null_scale, EPS60graphics, EPSONmove, EPSONvector,
EPSONlinetype, EPSONput_text, EPSON_text_angle,
null_justify_text, do_point, do_arrow}
#endif
#ifdef T410X
,{"tek410x", "Tektronix 4106, 4107, 4109 and 420X terminals",
T410XXMAX, T410XYMAX, T410XVCHAR, T410XHCHAR,
T410XVTIC, T410XHTIC, options_null, T410X_init, T410X_reset,
T410X_text, null_scale, T410X_graphics, T410X_move, T410X_vector,
T410X_linetype, T410X_put_text, T410X_text_angle,
null_justify_text, T410X_point, do_arrow}
#endif
#ifdef TEK
,{"tek40xx", "Tektronix 4010 and others; most TEK emulators",
TEK40XMAX, TEK40YMAX, TEK40VCHAR, TEK40HCHAR,
TEK40VTIC, TEK40HTIC, options_null, TEK40init, TEK40reset,
TEK40text, null_scale, TEK40graphics, TEK40move, TEK40vector,
TEK40linetype, TEK40put_text, null_text_angle,
null_justify_text, line_and_point, do_arrow}
#endif
#ifdef UNIXPLOT
,{"unixplot", "Unix plotting standard (see plot(1))",
UP_XMAX, UP_YMAX, UP_VCHAR, UP_HCHAR,
UP_VTIC, UP_HTIC, options_null, UP_init, UP_reset,
UP_text, null_scale, UP_graphics, UP_move, UP_vector,
UP_linetype, UP_put_text, null_text_angle,
null_justify_text, line_and_point, do_arrow}
#endif
#ifdef UNIXPC
,{"unixpc", "AT&T 3b1 or AT&T 7300 Unix PC",
uPC_XMAX, uPC_YMAX, uPC_VCHAR, uPC_HCHAR,
uPC_VTIC, uPC_HTIC, options_null, uPC_init, uPC_reset,
uPC_text, null_scale, uPC_graphics, uPC_move, uPC_vector,
uPC_linetype, uPC_put_text, uPC_text_angle,
null_justify_text, line_and_point, do_arrow}
#endif
#ifdef V384
,{"vx384", "Vectrix 384 and Tandy color printer",
V384_XMAX, V384_YMAX, V384_VCHAR, V384_HCHAR,
V384_VTIC, V384_HTIC, options_null, V384_init, V384_reset,
V384_text, null_scale, V384_graphics, V384_move, V384_vector,
V384_linetype, V384_put_text, null_text_angle,
null_justify_text, do_point, do_arrow}
#endif
#ifdef VTTEK
,{"vttek", "VT-like tek40xx terminal emulator",
TEK40XMAX,TEK40YMAX,TEK40VCHAR, TEK40HCHAR,
TEK40VTIC, TEK40HTIC, options_null, VTTEK40init, VTTEK40reset,
TEK40text, null_scale, TEK40graphics, TEK40move, TEK40vector,
VTTEK40linetype, VTTEK40put_text, null_text_angle,
null_justify_text, line_and_point, do_arrow}
#endif
#ifdef X11
,{"x11", "X11 Window System",
X11_XMAX, X11_YMAX, X11_VCHAR, X11_HCHAR,
X11_VTIC, X11_HTIC, options_null, X11_init, X11_reset,
X11_text, null_scale, X11_graphics, X11_move, X11_vector,
X11_linetype, X11_put_text, null_text_angle,
X11_justify_text, line_and_point, do_arrow}
,{"X11", "X11 Window System - multi-color points",
X11_XMAX, X11_YMAX, X11_VCHAR, X11_HCHAR,
X11_VTIC, X11_HTIC, options_null, X11_init, X11_reset,
X11_text, null_scale, X11_graphics, X11_move, X11_vector,
X11_linetype, X11_put_text, null_text_angle,
X11_justify_text, do_point, do_arrow}
#endif
};
#define TERMCOUNT (sizeof(term_tbl)/sizeof(struct termentry))
list_terms()
{
register int i;
fprintf(stderr,"\nAvailable terminal types:\n");
for (i = 0; i < TERMCOUNT; i++)
fprintf(stderr," %15s %s\n",
term_tbl[i].name, term_tbl[i].description);
(void) putc('\n',stderr);
}
/* set_term: get terminal number from name on command line */
/* will change 'term' variable if successful */
int /* term number */
set_term(c_token)
int c_token;
{
register int t;
char *input_name;
if (!token[c_token].is_token)
int_error("terminal name expected",c_token);
t = -1;
input_name = input_line + token[c_token].start_index;
t = change_term(input_name, token[c_token].length);
if (t == -1)
int_error("unknown terminal type; type just 'set terminal' for a list",
c_token);
if (t == -2)
int_error("ambiguous terminal name; type just 'set terminal' for a list",
c_token);
/* otherwise the type was changed */
return(t);
}
/* change_term: get terminal number from name and set terminal type */
/* returns -1 if unknown, -2 if ambiguous, >=0 is terminal number */
int
change_term(name, length)
char *name;
int length;
{
int i, t = -1;
for (i = 0; i < TERMCOUNT; i++) {
if (!strncmp(name,term_tbl[i].name,length)) {
if (t != -1)
return(-2); /* ambiguous */
t = i;
}
}
if (t == -1) /* unknown */
return(t);
/* Success: set terminal type now */
term = t;
term_init = FALSE;
name = term_tbl[term].name;
/* Special handling for unixplot term type */
if (!strncmp("unixplot",name,8)) {
UP_redirect (2); /* Redirect actual stdout for unixplots */
} else if (unixplot) {
UP_redirect (3); /* Put stdout back together again. */
}
if (interactive)
fprintf(stderr, "Terminal type set to '%s'\n", name);
return(t);
}
/*
Routine to detect what terminal is being used (or do anything else
that would be nice). One anticipated (or allowed for) side effect
is that the global ``term'' may be set.
The environment variable GNUTERM is checked first; if that does
not exist, then the terminal hardware is checked, if possible,
and finally, we can check $TERM for some kinds of terminals.
*/
/* thanks to osupyr!alden (Dave Alden) for the original GNUTERM code */
init_terminal()
{
char *term_name = NULL;
int t;
char *term = NULL; /* from TERM environment var */
#ifdef X11
char *display = NULL;
#endif
char *gnuterm = NULL;
/* GNUTERM environment variable is primary */
gnuterm = getenv("GNUTERM");
if (gnuterm != (char *)NULL) {
term_name = gnuterm;
#ifdef __TURBOC__
get_path(); /* So *_init() can find the BGI driver */
#endif
}
else {
#ifdef __TURBOC__
term_name = turboc_init();
term = (char *)NULL; /* shut up turbo C */
#endif
#ifdef vms
term_name = vms_init();
#endif
#ifdef NEXT
term = getenv("TERM");
if (term_name == (char *)NULL
&& term != (char *)NULL && strcmp(term,"next") == 0)
term_name = "next";
#endif /* NeXT */
#ifdef SUN
term = getenv("TERM"); /* try $TERM */
if (term_name == (char *)NULL
&& term != (char *)NULL && strcmp(term, "sun") == 0)
term_name = "sun";
#endif /* sun */
#ifdef GPR
if (gpr_isa_pad()) term_name = "gpr"; /* find out whether stdout is a DM pad. See term/gpr.trm */
#else
#ifdef APOLLO
if (apollo_isa_pad()) term_name = "apollo"; /* find out whether stdout is a DM pad. See term/apollo.trm */
#endif /* APOLLO */
#endif /* GPR */
#ifdef X11
term = getenv("TERM"); /* try $TERM */
if (term_name == (char *)NULL
&& term != (char *)NULL && strcmp(term, "xterm") == 0)
term_name = "x11";
display = getenv("DISPLAY");
if (term_name == (char *)NULL && display != (char *)NULL)
term_name = "x11";
#endif /* x11 */
#ifdef AMIGASCREEN
term_name = "amiga";
#endif
#ifdef UNIXPC
if (iswind() == 0) {
term_name = "unixpc";
}
#endif /* unixpc */
#ifdef CGI
if (getenv("CGIDISP") || getenv("CGIPRNT"))
term_name = "cgi";
#endif /*CGI */
}
/* We have a name, try to set term type */
if (term_name != NULL && *term_name != '\0') {
t = change_term(term_name, strlen(term_name));
if (t == -1)
fprintf(stderr, "Unknown terminal name '%s'\n", term_name);
else if (t == -2)
fprintf(stderr, "Ambiguous terminal name '%s'\n", term_name);
else /* successful */
;
}
}
#ifdef __TURBOC__
char *
turboc_init()
{
int g_driver,g_mode;
char far *c1,*c2;
char *term_name = NULL;
struct text_info tinfo; /* So we can restore starting text mode. */
/* Some of this code including BGI drivers is copyright Borland Intl. */
g_driver=DETECT;
get_path();
gettextinfo(&tinfo);
initgraph(&g_driver,&g_mode,path);
c1=getdrivername();
c2=getmodename(g_mode);
switch (g_driver){
case -2: fprintf(stderr,"Graphics card not detected.\n");
break;
case -3: fprintf(stderr,"BGI driver file cannot be found.\n");
break;
case -4: fprintf(stderr,"Invalid BGI driver file.\n");
break;
case -5: fprintf(stderr,"Insufficient memory to load ",
"graphics driver.");
break;
case 1 : term_name = "cga";
break;
case 2 : term_name = "mcga";
break;
case 3 :
case 4 : term_name = "egalib";
break;
case 7 : term_name = "hercules";
break;
case 8 : term_name = "att";
break;
case 9 : term_name = "vgalib";
break;
}
closegraph();
textmode(tinfo.currmode);
clrscr();
fprintf(stderr,"\tTC Graphics, driver %s mode %s\n",c1,c2);
return(term_name);
}
#endif /* __TURBOC__ */
/*
This is always defined so we don't have to have command.c know if it
is there or not.
*/
#ifndef UNIXPLOT
UP_redirect(caller) int caller;
{
caller = caller; /* to stop Turbo C complaining
* about caller not being used */
}
#else
UP_redirect (caller)
int caller;
/*
Unixplot can't really write to outfile--it wants to write to stdout.
This is normally ok, but the original design of gnuplot gives us
little choice. Originally users of unixplot had to anticipate
their needs and redirect all I/O to a file... Not very gnuplot-like.
caller: 1 - called from SET OUTPUT "FOO.OUT"
2 - called from SET TERM UNIXPLOT
3 - called from SET TERM other
4 - called from SET OUTPUT
*/
{
switch (caller) {
case 1:
/* Don't save, just replace stdout w/outfile (save was already done). */
if (unixplot)
*(stdout) = *(outfile); /* Copy FILE structure */
break;
case 2:
if (!unixplot) {
fflush(stdout);
save_stdout = *(stdout);
*(stdout) = *(outfile); /* Copy FILE structure */
unixplot = 1;
}
break;
case 3:
/* New terminal in use--put stdout back to original. */
closepl();
fflush(stdout);
*(stdout) = save_stdout; /* Copy FILE structure */
unixplot = 0;
break;
case 4:
/* User really wants to go to normal output... */
if (unixplot) {
fflush(stdout);
*(stdout) = save_stdout; /* Copy FILE structure */
}
break;
}
}
#endif
/* test terminal by drawing border and text */
/* called from command test */
test_term()
{
register struct termentry *t = &term_tbl[term];
char *str;
int x,y, xl,yl, i;
unsigned int xmax, ymax;
char label[MAX_ID_LEN];
int scaling;
if (!term_init) {
(*t->init)();
term_init = TRUE;
}
screen_ok = FALSE;
scaling = (*t->scale)(xsize, ysize);
xmax = (unsigned int)(t->xmax * (scaling ? 1 : xsize));
ymax = (unsigned int)(t->ymax * (scaling ? 1 : ysize));
(*t->graphics)();
/* border linetype */
(*t->linetype)(-2);
(*t->move)(0,0);
(*t->vector)(xmax-1,0);
(*t->vector)(xmax-1,ymax-1);
(*t->vector)(0,ymax-1);
(*t->vector)(0,0);
(void) (*t->justify_text)(LEFT);
(*t->put_text)(t->h_char*5,ymax-t->v_char*3,"Terminal Test");
/* axis linetype */
(*t->linetype)(-1);
(*t->move)(xmax/2,0);
(*t->vector)(xmax/2,ymax-1);
(*t->move)(0,ymax/2);
(*t->vector)(xmax-1,ymax/2);
/* test width and height of characters */
(*t->linetype)(-2);
(*t->move)( xmax/2-t->h_char*10,ymax/2+t->v_char/2);
(*t->vector)(xmax/2+t->h_char*10,ymax/2+t->v_char/2);
(*t->vector)(xmax/2+t->h_char*10,ymax/2-t->v_char/2);
(*t->vector)(xmax/2-t->h_char*10,ymax/2-t->v_char/2);
(*t->vector)(xmax/2-t->h_char*10,ymax/2+t->v_char/2);
(*t->put_text)(xmax/2-t->h_char*10,ymax/2,
"12345678901234567890");
/* test justification */
(void) (*t->justify_text)(LEFT);
(*t->put_text)(xmax/2,ymax/2+t->v_char*6,"left justified");
str = "centre+d text";
if ((*t->justify_text)(CENTRE))
(*t->put_text)(xmax/2,
ymax/2+t->v_char*5,str);
else
(*t->put_text)(xmax/2-strlen(str)*t->h_char/2,
ymax/2+t->v_char*5,str);
str = "right justified";
if ((*t->justify_text)(RIGHT))
(*t->put_text)(xmax/2,
ymax/2+t->v_char*4,str);
else
(*t->put_text)(xmax/2-strlen(str)*t->h_char,
ymax/2+t->v_char*4,str);
/* test text angle */
str = "rotated ce+ntred text";
if ((*t->text_angle)(1)) {
if ((*t->justify_text)(CENTRE))
(*t->put_text)(t->v_char,
ymax/2,str);
else
(*t->put_text)(t->v_char,
ymax/2-strlen(str)*t->h_char/2,str);
}
else {
(void) (*t->justify_text)(LEFT);
(*t->put_text)(t->h_char*2,ymax/2-t->v_char*2,"Can't rotate text");
}
(void) (*t->justify_text)(LEFT);
(void) (*t->text_angle)(0);
/* test tic size */
(*t->move)(xmax/2+t->h_tic*2,0);
(*t->vector)(xmax/2+t->h_tic*2,t->v_tic);
(*t->move)(xmax/2,t->v_tic*2);
(*t->vector)(xmax/2+t->h_tic,t->v_tic*2);
(*t->put_text)(xmax/2+t->h_tic*2,t->v_tic*2+t->v_char/2,"test tics");
/* test line and point types */
x = xmax - t->h_char*4 - t->h_tic*4;
y = ymax - t->v_char;
for ( i = -2; y > t->v_char; i++ ) {
(*t->linetype)(i);
(void) sprintf(label,"%d",i);
if ((*t->justify_text)(RIGHT))
(*t->put_text)(x,y,label);
else
(*t->put_text)(x-strlen(label)*t->h_char,y,label);
(*t->move)(x+t->h_char,y);
(*t->vector)(x+t->h_char*4,y);
if ( i >= -1 )
(*t->point)(x+t->h_char*4+t->h_tic*2,y,i);
y -= t->v_char;
}
/* test some arrows */
(*t->linetype)(0);
x = xmax/4;
y = ymax/4;
xl = t->h_tic*5;
yl = t->v_tic*5;
(*t->arrow)(x,y,x+xl,y,TRUE);
(*t->arrow)(x,y,x+xl/2,y+yl,TRUE);
(*t->arrow)(x,y,x,y+yl,TRUE);
(*t->arrow)(x,y,x-xl/2,y+yl,FALSE);
(*t->arrow)(x,y,x-xl,y,TRUE);
(*t->arrow)(x,y,x-xl,y-yl,TRUE);
(*t->arrow)(x,y,x,y-yl,TRUE);
(*t->arrow)(x,y,x+xl,y-yl,TRUE);
/* and back into text mode */
(*t->text)();
}
#ifdef PC
/* output for some terminal types must be binary to stop non Unix computers
changing \n to \r\n.
If the output is not STDOUT, the following code reopens outfile
with binary mode. */
void
reopen_binary()
{
char filename[MAX_ID_LEN+1];
if (strcmp(outstr,"STDOUT")) {
(void) fclose(outfile);
(void) strcpy(filename,outstr+1); /* remove quotes */
filename[strlen(filename)-1] = '\0';
if ( (outfile = fopen(filename,"wb")) == (FILE *)NULL ) {
if ( (outfile = fopen(filename,"w")) == (FILE *)NULL ) {
os_error("cannot reopen file with binary type; output unknown",
NO_CARET);
}
else {
os_error("cannot reopen file with binary type; output reset to ascii",
NO_CARET);
}
}
}
}
#endif
#ifdef vms
/* these are needed to modify terminal characteristics */
#include <descrip.h>
#include <iodef.h>
#include <ttdef.h>
#include <tt2def.h>
#include <dcdef.h>
#include <ssdef.h>
#include <stat.h>
#include <fab.h>
static unsigned short chan;
static int old_char_buf[3], cur_char_buf[3];
$DESCRIPTOR(sysoutput_desc,"SYS$OUTPUT");
char *vms_init()
/*
* Determine if we have a regis terminal
* and save terminal characteristics
*/
{
/* Save terminal characteristics in old_char_buf and
initialise cur_char_buf to current settings. */
int i;
sys$assign(&sysoutput_desc,&chan,0,0);
sys$qiow(0,chan,IO$_SENSEMODE,0,0,0,old_char_buf,12,0,0,0,0);
for (i = 0 ; i < 3 ; ++i) cur_char_buf[i] = old_char_buf[i];
sys$dassgn(chan);
/* Test if terminal is regis */
if ((cur_char_buf[2] & TT2$M_REGIS) == TT2$M_REGIS) return("regis");
return(NULL);
}
void
vms_reset()
/* set terminal to original state */
{
int i;
sys$assign(&sysoutput_desc,&chan,0,0);
sys$qiow(0,chan,IO$_SETMODE,0,0,0,old_char_buf,12,0,0,0,0);
for (i = 0 ; i < 3 ; ++i) cur_char_buf[i] = old_char_buf[i];
sys$dassgn(chan);
}
void
term_mode_tek()
/* set terminal mode to tektronix */
{
long status;
if (outfile != stdout) return; /* don't modify if not stdout */
sys$assign(&sysoutput_desc,&chan,0,0);
cur_char_buf[0] = 0x004A0000 | DC$_TERM | (TT$_TEK401X<<8);
cur_char_buf[1] = (cur_char_buf[1] & 0x00FFFFFF) | 0x18000000;
cur_char_buf[1] &= ~TT$M_CRFILL;
cur_char_buf[1] &= ~TT$M_ESCAPE;
cur_char_buf[1] &= ~TT$M_HALFDUP;
cur_char_buf[1] &= ~TT$M_LFFILL;
cur_char_buf[1] &= ~TT$M_MECHFORM;
cur_char_buf[1] &= ~TT$M_NOBRDCST;
cur_char_buf[1] &= ~TT$M_NOECHO;
cur_char_buf[1] &= ~TT$M_READSYNC;
cur_char_buf[1] &= ~TT$M_REMOTE;
cur_char_buf[1] |= TT$M_LOWER;
cur_char_buf[1] |= TT$M_TTSYNC;
cur_char_buf[1] |= TT$M_WRAP;
cur_char_buf[1] &= ~TT$M_EIGHTBIT;
cur_char_buf[1] &= ~TT$M_MECHTAB;
cur_char_buf[1] &= ~TT$M_SCOPE;
cur_char_buf[1] |= TT$M_HOSTSYNC;
cur_char_buf[2] &= ~TT2$M_APP_KEYPAD;
cur_char_buf[2] &= ~TT2$M_BLOCK;
cur_char_buf[2] &= ~TT2$M_DECCRT3;
cur_char_buf[2] &= ~TT2$M_LOCALECHO;
cur_char_buf[2] &= ~TT2$M_PASTHRU;
cur_char_buf[2] &= ~TT2$M_REGIS;
cur_char_buf[2] &= ~TT2$M_SIXEL;
cur_char_buf[2] |= TT2$M_BRDCSTMBX;
cur_char_buf[2] |= TT2$M_EDITING;
cur_char_buf[2] |= TT2$M_INSERT;
cur_char_buf[2] |= TT2$M_PRINTER;
cur_char_buf[2] &= ~TT2$M_ANSICRT;
cur_char_buf[2] &= ~TT2$M_AVO;
cur_char_buf[2] &= ~TT2$M_DECCRT;
cur_char_buf[2] &= ~TT2$M_DECCRT2;
cur_char_buf[2] &= ~TT2$M_DRCS;
cur_char_buf[2] &= ~TT2$M_EDIT;
cur_char_buf[2] |= TT2$M_FALLBACK;
status = sys$qiow(0,chan,IO$_SETMODE,0,0,0,cur_char_buf,12,0,0,0,0);
if (status == SS$_BADPARAM) {
/* terminal fallback utility not installed on system */
cur_char_buf[2] &= ~TT2$M_FALLBACK;
sys$qiow(0,chan,IO$_SETMODE,0,0,0,cur_char_buf,12,0,0,0,0);
}
else {
if (status != SS$_NORMAL)
lib$signal(status,0,0);
}
sys$dassgn(chan);
}
void
term_mode_native()
/* set terminal mode back to native */
{
int i;
if (outfile != stdout) return; /* don't modify if not stdout */
sys$assign(&sysoutput_desc,&chan,0,0);
sys$qiow(0,chan,IO$_SETMODE,0,0,0,old_char_buf,12,0,0,0,0);
for (i = 0 ; i < 3 ; ++i) cur_char_buf[i] = old_char_buf[i];
sys$dassgn(chan);
}
void
term_pasthru()
/* set terminal mode pasthru */
{
if (outfile != stdout) return; /* don't modify if not stdout */
sys$assign(&sysoutput_desc,&chan,0,0);
cur_char_buf[2] |= TT2$M_PASTHRU;
sys$qiow(0,chan,IO$_SETMODE,0,0,0,cur_char_buf,12,0,0,0,0);
sys$dassgn(chan);
}
void
term_nopasthru()
/* set terminal mode nopasthru */
{
if (outfile != stdout) return; /* don't modify if not stdout */
sys$assign(&sysoutput_desc,&chan,0,0);
cur_char_buf[2] &= ~TT2$M_PASTHRU;
sys$qiow(0,chan,IO$_SETMODE,0,0,0,cur_char_buf,12,0,0,0,0);
sys$dassgn(chan);
}
void
reopen_binary()
/* close the file outfile outfile and reopen it with binary type
if not already done or outfile == stdout */
{
stat_t stat_buf;
char filename[MAX_ID_LEN+1];
if (outfile != stdout) { /* don't modify if not stdout */
if (!fstat(fileno(outfile),&stat_buf)) {
if (stat_buf.st_fab_rfm != FAB$C_FIX) {
/* modify only if not already done */
(void) fclose(outfile);
(void) strcpy(filename,outstr+1); /* remove quotes */
filename[strlen(filename)-1] = '\0';
(void) delete(filename);
if ((outfile = fopen(filename,"wb","rfm=fix","bls=512","mrs=512"))
== (FILE *)NULL ) {
if ( (outfile = fopen(filename,"w")) == (FILE *)NULL ) {
os_error("cannot reopen file with binary type; output unknown",
NO_CARET);
}
else {
os_error("cannot reopen file with binary type; output reset to ascii",
NO_CARET);
}
}
}
}
else{
os_error("cannot reopen file with binary type; output remains ascii",
NO_CARET);
}
}
}
void
fflush_binary()
{
typedef short int INT16; /* signed 16-bit integers */
register INT16 k; /* loop index */
if (outfile != stdout) {
/* Stupid VMS fflush() raises error and loses last data block
unless it is full for a fixed-length record binary file.
Pad it here with NULL characters. */
for (k = (INT16)((*outfile)->_cnt); k > 0; --k)
putc('\0',outfile);
fflush(outfile);
}
}
#endif