File psl-1983/lpt/12-io.lpt artifact e7b26fbeea part of check-in 79abca0c1b


PSL Manual                    7 February 1983              Input and Output
section 12.0                                                      page 12.1

                                CHAPTER 12
                                CHAPTER 12
                                CHAPTER 12
                             INPUT AND OUTPUT
                             INPUT AND OUTPUT
                             INPUT AND OUTPUT




     12.1. Introduction .  .  .  .  .  .  .  .  .  .  .  .  .  .  .    12.1
     12.2. The Underlying Primitives for Input and Output.  .  .  .    12.1
     12.3. Opening, Closing, and Selecting Channels.  .  .  .  .  .    12.5
     12.4. Functions for Printing.  .  .  .  .  .  .  .  .  .  .  .    12.8
     12.5. Functions for Reading .  .  .  .  .  .  .  .  .  .  .  .   12.16
          12.5.1. Reading S-Expression .  .  .  .  .  .  .  .  .  .   12.16
          12.5.2. Reading Files into PSL  .  .  .  .  .  .  .  .  .   12.17
          12.5.3. Reading Single Characters  .  .  .  .  .  .  .  .   12.20
          12.5.4. Reading Tokens .  .  .  .  .  .  .  .  .  .  .  .   12.21
          12.5.5. Read Macros .  .  .  .  .  .  .  .  .  .  .  .  .   12.30
     12.6. Scan Table Utility Functions.  .  .  .  .  .  .  .  .  .   12.31
     12.7. I/O to and from Lists and Strings .  .  .  .  .  .  .  .   12.32
     12.8. Example of Simple I/O in PSL.  .  .  .  .  .  .  .  .  .   12.34




12.1. Introduction
12.1. Introduction
12.1. Introduction

  Most LISP programs are written with no sophisticated I/O, so this chapter
may   be   skimmed   by  those  with  simple  I/O  requirements.    Section
12.8 contains an example showing the use  of  some  I/O  functions.    This
should  help  the  beginning  PSL  user  get  started.    Sections 12.5 and
12.6 deal extensively with customizing the scanner and reader, which is  of
interest only to the sophisticated user.



12.2. The Underlying Primitives for Input and Output
12.2. The Underlying Primitives for Input and Output
12.2. The Underlying Primitives for Input and Output

  All  input and output functions are implemented in terms of operations on
                                              1
                                       _______
"channels".  A channel is just a small integer  which has 3  functions  and
some other information associated with it.  The three functions are:


   a. A  reading  function,  which  is  called with the channel as its
                                  _______
      argument and  returns  the  integer  ASCII  value  of  the  next


_______________

  1
   The range of channel numbers is from 0 to MaxChannels, where MaxChannels
is  a  system-dependent  constant,  currently  31,  defined in IO-DATA.RED.
MaxChannels is a WCONST, and is not available for use at runtime.
Input and Output              7 February 1983                    PSL Manual
page 12.2                                                      section 12.2

      character  of  the  input stream.  If the channel is for writing
                             WriteOnlyChannel
                             WriteOnlyChannel
      only, this function is WriteOnlyChannel.  If the channel has not
                                       ChannelNotOpen
                                       ChannelNotOpen
      been opened, this  function  is  ChannelNotOpen.    The  reading
      function  is  responsible  for  echoing  characters  if the flag
                                               WriteChar
                                               WriteChar
      !*ECHO is T.  It should use the function WriteChar to  echo  the
      character.    It  may  not be appropriate for a read function to
      echo characters.  For example, the "disk" reading function  does
                                                              Compress
                                                              Compress
      echoing,  while  the  reader  used  to  implement  the  Compress
      function does not.

      The read function must also be concerned with  the  handling  of
      ends  of "files" (actually, ends of channels) and ends of lines.
      It should return the ASCII code for an  end  of  file  character
      (system  dependent)  when  reaching  the  end  of a channel.  It
      should return the ASCII  code  for  a  line  feed  character  to
      indicate  an  end of line (or "newline").  This may require that
      the ASCII code for carriage return be  ignored  when  read,  not
      returned.

   b. A  writing  function,  which  is  called with the channel as its
                             _______
      first argument and the integer ASCII value of the  character  to
      write  as  its  second  argument.  If the channel is for reading
                             ReadOnlyChannel
                             ReadOnlyChannel
      only, this function is ReadOnlyChannel.  If the channel has  not
                                    ChannelNotOpen
                                    ChannelNotOpen
      been opened, this function is ChannelNotOpen.

   c. A  closing  function,  which  is  called with the channel as its
      argument and performs any  action  necessary  for  the  graceful
      termination  of  input and/or output operations to that channel.
                                                   ChannelNotOpen
                                                   ChannelNotOpen
      If the channel is not open, this function is ChannelNotOpen.


  The other information associated with  a  channel  includes  the  current
                                     Posn
                                     Posn
position in the output line (used by Posn), the maximum line length allowed
         LineLength
         LineLength
(used by LineLength and the printing functions), the single character input
backup  buffer  (used  by  the  token  scanner), and other system-dependent
information.

  Ordinarily, the  user  need  not  be  aware  of  the  existence  of  this
mechanism.  However, because of its generality, it is possible to implement
operations  other than just reading from and writing to files using it.  In
                                 Explode       Compress
                                 Explode       Compress
particular, the LISP  functions  Explode  and  Compress  are  performed  by
              ____                    ____
writing  to a list and reading from a list, respectively (on channels 3 and
4 respectively).

  Ordinarily, user interaction with the system is done by reading from  the
standard  input  channel and writing to the standard output channel.  These
are 0 and 1  respectively,  to  which  the  GLOBAL  variables  STDIN!*  and
STDOUT!*  are  bound.  These channels usually refer to the user's terminal,
and cannot be closed.  Other files are accessed  by  calling  the  function
Open
Open
Open,  which  returns  a  channel.   Most functions which perform input and
output come in two forms, one which takes a channel as its first  argument,
                                                                    Rds
                                                                    Rds
and one which uses the "currently selected channel".  The functions Rds and
PSL Manual                    7 February 1983              Input and Output
section 12.2                                                      page 12.3

Wrs
Wrs
Wrs  are  used  to change the currently selected input and output channels.
The GLOBAL variables IN!* and OUT!* are bound to these channels.

  GLOBAL variables containing information about channels are listed below.


      __________                                                     ______
IN!* [Initially: 0]                                                  global

     Contains the currently selected input channel.  This  is  changed
                     Rds
                     Rds
     by the function Rds.


       __________                                                    ______
OUT!* [Initially: 1]                                                 global

     Contains  the currently selected output channel.  This is changed
                     Wrs
                     Wrs
     by the function Wrs.


         __________                                                  ______
STDIN!* [Initially: 0]                                               global

     The standard input channel.


          __________                                                 ______
STDOUT!* [Initially: 1]                                              global

     The standard output channel.


           __________                                                ______
BREAKIN!* [Initially: NIL]                                           global

                                BREAK
                                BREAK
     The channel from which the BREAK loop gets its  input.    It  has
     been  set  to  default  to STDIN!*, but may have to be changed on
     some systems with buffered-IO.


            __________                                               ______
BREAKOUT!* [Initially: NIL]                                          global

                              BREAK
                              BREAK
     The channel to which the BREAK loop sends its  output.    It  has
     been  set  to  default to STDOUT!*, but may have to be changed on
     some systems with buffered-IO.


          __________                                                 ______
HELPIN!* [Initially: NIL]                                            global

                                       Help
                                       Help
     The channel used for input by the Help mechanism.


           __________                                                ______
HELPOUT!* [Initially: NIL]                                           global

                                        Help
                                        Help
     The channel used for output by the Help mechanism.
Input and Output              7 February 1983                    PSL Manual
page 12.4                                                      section 12.2

          __________                                                 ______
ERROUT!* [Initially: 1]                                              global

                             ErrorPrintF
                             ErrorPrintF
     The channel used by the ErrorPrintF.


                __________                                           ______
PROMPTSTRING!* [Initially: "lisp>"]                                  global

     Displayed  as  a  prompt  when any input is taken from TTY.  Thus
     prompts should not be directly printed.  Instead the value should
     be bound to PROMPTSTRING!*.



12.3. Opening, Closing, and Selecting Channels
12.3. Opening, Closing, and Selecting Channels
12.3. Opening, Closing, and Selecting Channels


 Open
 Open ________ ______  __________ __   _______ __ _______              ____
(Open FILENAME:string  ACCESSTYPE:id): CHANNEL:io-channel              expr

                      Eq
        __________    Eq
     If ACCESSTYPE is Eq to INPUT or OUTPUT, an  attempt  is  made  to
                                  ________
     access  the system-dependent FILENAME for reading or writing.  If
     the attempt is unsuccessful, an error is generated;  otherwise  a
     free   channel   is  returned  and  initialized  to  the  default
     conditions for ordinary file input or output.

                         Eq
         __________      Eq
     If  ACCESSTYPE  is  Eq  to  SPECIAL  and  the  GLOBAL   variables
     SPECIALREADFUNCTION!*,         SPECIALWRITEFUNCTION!*,        and
                                         __
     SPECIALCLOSEFUNCTION!* are bound to ids, then a free  channel  is
     returned  and  its  associated functions are set to the values of
     these variables.  Other non system-dependent  status  is  set  to
     default conditions, which can later be overridden.  The functions
     ReadOnlyChannel       WriteOnlyChannel
     ReadOnlyChannel       WriteOnlyChannel
     ReadOnlyChannel  and  WriteOnlyChannel  are  available  as  error
                               ________
     handlers.  The parameter  FILENAME  is  used  only  if  an  error
     occurs.

       [???  We should replace these globals and SPECIAL option by a
       [???  We should replace these globals and SPECIAL option by a
       [???  We should replace these globals and SPECIAL option by a
       (SPECIALOPEN Readfunction writefunction  closefunction)  call
       (SPECIALOPEN Readfunction writefunction  closefunction)  call
       (SPECIALOPEN Readfunction writefunction  closefunction)  call
       ???]
       ???]
       ???]

     If  none  of  these  conditions hold, a file is not available, or
     there are no free channels, an error is generated.  

     ***** Unknown access type

     ***** Improperly set-up special IO open call

     ***** File not found

     ***** No free channels

              FileP
              FileP
  One can use FileP to find out whether a file exists.
PSL Manual                    7 February 1983              Input and Output
section 12.3                                                      page 12.5

 FileP
 FileP ____ ______   _______                                           ____
(FileP NAME:string): boolean                                           expr

                                           ____
     This  function  will return T if file NAME can be opened, and NIL
     if not, e.g. if it does not exist.


 Close
 Close _______ __ _______   __ _______                                 ____
(Close CHANNEL:io-channel): io-channel                                 expr

                                            _______
     The closing function associated  with  CHANNEL  is  called,  with
     _______                                               _______
     CHANNEL  as  its argument.  If it is illegal to close CHANNEL, if
     _______                    _______
     CHANNEL is not open, or if CHANNEL is associated with a file  and
     the  file cannot be closed by the operating system, this function
                                     _______
     generates an error.  Otherwise, CHANNEL is marked as free and  is
     returned.


 Shut
 Shut  _ ______    ____ ________                                      _____
(Shut [L:string]): None Returned                                      macro

                                                       Shut
                                         _             Shut
     Closes the output files in the list L.  Note that Shut takes file
                                 Close
                                 Close          __ _______
     names  as  arguments, while Close takes an io-channel.  The RLISP
     IN
     IN
     IN  function  maintains  a  stack  of  file-name   .   io-channel
                                              shut
                                              shut
     associations  for  this  purpose. Thus a shut will also correctly
     select the previous file for further output.


 EvShut
 EvShut _ ______ ____   ____ ________                                  ____
(EvShut L:string-list): none Returned                                  expr

                      Shut
                      Shut
     Does the same as Shut but evaluates its arguments.


 Rds
 Rds  _______ __ _______  ___    __ _______                            ____
(Rds {CHANNEL:io-channel, NIL}): io-channel                            expr

     Rds
     Rds
     Rds sets IN!* to the value  of  its  argument,  and  returns  the
     previous  value  of  IN!*.  In addition, if SPECIALRDSACTION!* is
     non-NIL, it should be a function of 2 arguments, which is  called
                  _______                                   _______
     with the old CHANNEL as its first argument and the new CHANNEL as
                           Rds                       Rds
                           Rds                       Rds
     its second argument.  Rds(NIL) does the same as Rds(STDIN!*).


 Wrs
 Wrs  _______ __ _______  ___    __ _______                            ____
(Wrs {CHANNEL:io-channel, NIL}): io-channel                            expr

     Wrs
     Wrs
     Wrs  sets  OUT!*  to  the  value  of its argument and returns the
     previous value of OUT!*.  In addition, if  SPECIALWRSACTION!*  is
     non-NIL,  it should be a function of 2 arguments, which is called
                  _______                                   _______
     with the old CHANNEL as its first argument and the new CHANNEL as
                           Wrs                       Wrs
                           Wrs                       Wrs
     its second argument.  Wrs(NIL) does the same as Wrs(STDOUT!*).


 Out
 Out _ ______   ____ ________                                         _____
(Out U:string): None Returned                                         macro

                _
     Opens file U for output, redirecting standard output.  Note  that
     Out                                      Wrs
     Out         ______                       Wrs          __ _______
     Out takes a string as an argument, while Wrs takes an io-channel.
Input and Output              7 February 1983                    PSL Manual
page 12.6                                                      section 12.3

 EvOut
 EvOut _ ______ ____   ____ ________                                   ____
(EvOut L:string-list): None Returned                                   expr

     _
     L  is  a  list  containing  one file name which must be a string.
     EvOut                  Out
     EvOut                  Out
     EvOut is the called by Out after evaluating its argument.

  The reading and writing functions come in two flavors: those that read or
                                                   RDS    WRS
                                                   RDS    WRS
write to the current channel, as set by a previous RDS or WRS into IN!*  or
OUT!*,  and  those  that  explicitly  designate the desired input or output
                                     Channel
                                     Channel
channel. The latter typically have a Channel as part of their name.

                                        ________
  The following GLOBALs are used by the functions in this section.


                        __________                                   ______
SPECIALCLOSEFUNCTION!* [Initially: NIL]                              global


                    __________                                       ______
SPECIALRDSACTION!* [Initially: NIL]                                  global


                       __________                                    ______
SPECIALREADFUNCTION!* [Initially: NIL]                               global


                        __________                                   ______
SPECIALWRITEFUNCTION!* [Initially: NIL]                              global


                    __________                                       ______
SPECIALWRSACTION!* [Initially: NIL]                                  global



12.4. Functions for Printing
12.4. Functions for Printing
12.4. Functions for Printing


 ChannelWriteChar
 ChannelWriteChar _______ __ _______  __ _________   _________         ____
(ChannelWriteChar CHANNEL:io-channel  CH:character): character         expr

                            _______
     Write one character to CHANNEL.  All output is defined  in  terms
                              __
     of  this  function.   If CH is equal to char EOL (ASCII LF, 8#12)
                                           _______
     the line counter POSN associated with CHANNEL  is  set  to  zero.
     Otherwise,  it  is  increased  by  one.    The  writing  function
                     _______                 _______       __
     associated with CHANNEL is called with  CHANNEL  and  CH  as  its
     arguments.


 WriteChar
 WriteChar __ _________   _________                                    ____
(WriteChar CH:character): character                                    expr

     Write single character to current output.    

        (de WRITECHAR (CH)
            (CHANNELWRITECHAR OUT!* CH))
PSL Manual                    7 February 1983              Input and Output
section 12.4                                                      page 12.7

 ChannelPrin1
 ChannelPrin1 ____ __ _______  ___ ___   ___ ___                       ____
(ChannelPrin1 CHAN:io-channel  ITM:any): ITM:any                       expr

     ChannelPrin1
     ChannelPrin1
     ChannelPrin1   is   the   basic  LISP  printing  function.    For
     well-formed, non-circular (non-self-referential) structures,  the
                                          Read
                                          Read
     result can be parsed by the function Read.


          ______
        - Strings are printed surrounded by double quotes (").

                              __
        - Delimiters  inside  ids are preceded by the escape character
          (!).

          _____
        - Floats are printed as {-}nnn.nnn{E{-}nn}.

          _______
        - Integers  are  printed  as  {-}nnn,  unless  the  value   of
          OUTPUTBASE!*  is  not  10, in which case they are printed as
          {-}r#nnn; r is the value of OutPutBase!*.

          ____
        - Pairs are printed in list-notation.  For example,


              (a . (b . c))


          is printed as 


              (a b . c)


          while 


              (a . (b . (c . NIL)))


          is printed as 


              (a b c)


          ______                                     ______
        - Vectors are printed in vector-notation; a  vector  of  three
          elements a, b, and c is printed as [a b c].


                                                                 Read
                                                                 Read
     The following items can be printed, but cannot be parsed by Read.


          ____ _______
        - code-pointers            are            printed           as
                 ________ _____ _____ _______            _____ _______
          #<Code argument-count octal-address>.   where  octal-address
          is  the octal machine address of the entry point of the code
Input and Output              7 February 1983                    PSL Manual
page 12.8                                                      section 12.4

          ______        ________ _____
          vector,  and  argument-count is the number of arguments that
          the code  takes.    The  argument  count  cannot  always  be
          determined,  in  which  case  nothing  is  printed  for  the
          ________ _____
          argument-count.

        - Anything else is printed as #<Unknown:nnnn>, where  nnnn  is
          the  octal value found in the argument register.  Such items
          are not legal LISP entities and may cause garbage  collector
          errors if they are found in the heap.


 Prin1
 Prin1 ___ ___   ___ ___                                               ____
(Prin1 ITM:any): ITM:any                                               expr


 ErrPrin
 ErrPrin _ ___   ____ ________                                         ____
(ErrPrin U:any): None Returned                                         expr

     Prin1
     Prin1                                  _
     Prin1 with special quotes to highlight U.


 ChannelPrin2
 ChannelPrin2 ____ __ _______  ___ ___   ___ ___                       ____
(ChannelPrin2 CHAN:io-channel  ITM:any): ITM:any                       expr

     ChannelPrin2                ChannelPrin1
     ChannelPrin2                ChannelPrin1              ______
     ChannelPrin2  is similar to ChannelPrin1, except that strings are
     printed without the surrounding  double  quotes,  and  delimiters
            __
     within ids are not preceded by the escape character.


 Prin2
 Prin2 ___ ___   ___ ___                                               ____
(Prin2 ITM:any): ITM:any                                               expr


 ChannelPrinC
 ChannelPrinC ____ __ _______ ___ ___   ___ ___                        ____
(ChannelPrinC CHAN:io-channel ITM:any): ITM:any                        expr

                      ChannelPrint2
                      ChannelPrint2
     Same function as ChannelPrint2.


 PrinC
 PrinC ___ ___   ___ ___                                               ____
(PrinC ITM:any): ITM:any                                               expr

                      Prin2
                      Prin2
     Same function as Prin2.


 ChannelPrint
 ChannelPrint ____ __ _______ _ ___   _ ___                            ____
(ChannelPrint CHAN:io-channel U:any): U:any                            expr

                           ChannelPrin1
               _           ChannelPrin1
     Display   U   using   ChannelPrin1   and   terminate  line  using
     ChannelTerpri
     ChannelTerpri
     ChannelTerpri.


 Print
 Print _ ___   _ ___                                                   ____
(Print U:any): U:any                                                   expr

     ChannelPrint
     ChannelPrint _
     ChannelPrint U to current output channel, OUT!*.
PSL Manual                    7 February 1983              Input and Output
section 12.4                                                      page 12.9

 ChannelPrintF
 ChannelPrintF ____ __ _______ ______ ______  ____ ___    ___          ____
(ChannelPrintF CHAN:io-channel FORMAT:string [ARGS:any]): NIL          expr

     ChannelPrintF
     ChannelPrintF
     ChannelPrintF is a simple routine for formatted printing, similar
                                                                ______
     to the function with the same name in the C language[22].  FORMAT
                                       ______
     is  either  a  LISP  or  SYSLISP  string, which is printed on the
     currently  selected  output  channel.    However,  if  a   %   is
                           ______
     encountered  in  the  string,  the  character  following  it is a
     formatting directive, used  to  interpret  and  print  the  other
                    ChannelPrintF
                    ChannelPrintF
     arguments  to  ChannelPrintF  in  order.    The  following format
     characters are currently supported:  


        - For SYSLISP arguments, use:


                                                         _______
          %d        print the next argument as a decimal integer
                                                        _______
          %o        print the next argument as an octal integer
                                                             _______
          %x        print the next argument as a hexadecimal integer
          %c        print the next argument as a single character
                                                 ______
          %s        print the next argument as a string


        - For LISP tagged items, use:


          %p        print the next argument  as  a  LISP  item,  using
                    Prin1
                    Prin1
                    Prin1
          %w        print  the  next  argument  as  a LISP item, using
                    Prin2
                    Prin2
                    Prin2
          %r        print the next argument  as  a  LISP  item,  using
                    ErrPrin               Prin2       Prin1      Prin2
                    ErrPrin               Prin2       Prin1      Prin2
                    ErrPrin  (Ordinarily  Prin2  "`"; Prin1 Arg; Prin2
                    "'" )
          %l        same as %w, except lists are printed  without  top
                    level parens; NIL is printed as a blank
          %e        eval  the  next  argument  for side-effect -- most
                                        eval
                                        eval
                    useful if the thing evaled does some printing


        - Control formats:


          %b        take next argument as an integer  and  print  that
                    many blanks
          %f        "fresh-line",  print  an  end-of-line character if
                    not at the beginning of the output line (does  not
                    use a matching argument)
          %n        print   end-of-line  character  (does  not  use  a
                    matching argument)
          %t        take  the  next  argument  as  an   integer,   and
                    ChannelTab
                    ChannelTab
                    ChannelTab to that position
Input and Output              7 February 1983                    PSL Manual
page 12.10                                                     section 12.4

     If  the  character  following % is not either one of the above or
     another %, it causes an error.  Thus,  to  include  a  %  in  the
     format to be printed, use %%.

     There  is  no  checking  for correspondence between the number of
                   ______
     arguments the FORMAT expects and the number given.  If the number
                                          ______
     given is less than the number in the FORMAT string, then  garbage
     will  be inserted for the missing arguments.  If the number given
                                       ______
     is greater than the number in the FORMAT string, then  the  extra
     ones are ignored.


 PrintF
 PrintF ______ ______   ____ ___    ___                                ____
(PrintF FORMAT:string  [ARGS:any]): NIL                                expr

     ChannelPrintF
     ChannelPrintF
     ChannelPrintF to the current output channel, OUT!*.


 ErrorPrintF
 ErrorPrintF ______ ______   ____ ___    ___                           ____
(ErrorPrintF FORMAT:string  [ARGS:any]): NIL                           expr

     ErrorPrintF                  PrintF
     ErrorPrintF                  PrintF
     ErrorPrintF  is  similar  to PrintF, except that instead of using
     the currently selected output channel, ERROUT!* is used.    Also,
     an end-of-line character is always printed after the message, and
     an  end-of-line  character  is  printed before the message if the
     line position of ERROUT!* is greater than zero.


 ChannelTerPri
 ChannelTerPri ____ __ _______   ___                                   ____
(ChannelTerPri CHAN:io-channel): NIL                                   expr

                                      ____
     Terminate OUTPUT line on channel CHAN, and reset the POSN counter
     to 0.


 TerPri
 TerPri    ___                                                         ____
(TerPri ): NIL                                                         expr

     Terminate current OUTPUT line, and reset the POSN counter to 0.


 ChannelEject
 ChannelEject ____ __ _______   ___                                    ____
(ChannelEject CHAN:io-channel): NIL                                    expr

                                                ____
     Skip to top of next output page on channel CHAN.


 Eject
 Eject    ___                                                          ____
(Eject ): NIL                                                          expr

     Skip to top of next output page on current output channel.


 ChannelPosn
 ChannelPosn ____ __ _______   _______                                 ____
(ChannelPosn CHAN:io-channel): integer                                 expr

     Returns number of characters  output  on  this  line  (i.e.  POSN
     counter since last Terpri) on this channel.
PSL Manual                    7 February 1983              Input and Output
section 12.4                                                     page 12.11

 Posn
 Posn    _______                                                       ____
(Posn ): integer                                                       expr

     Returns  number  of  characters  output  on  this line (i.e. POSN
     counter since last Terpri)


 ChannelLPosn
 ChannelLPosn ____ __ _______   _______                                ____
(ChannelLPosn CHAN:io-channel): integer                                expr

                                                        LPosn
                                                        LPosn
     Returns number of lines output on this page (i.e.  LPosn  counter
     since last Eject) on this channel.


 LPosn
 LPosn    _______                                                      ____
(LPosn ): integer                                                      expr

                                                         LPosn
                                                         LPosn
     Returns  number  of lines output on this page (i.e. LPosn counter
     since last Eject).


 ChannelLineLength
 ChannelLineLength ____ __ _______ ___  _______  ___    _______        ____
(ChannelLineLength CHAN:io-channel LEN:{integer, NIL}): integer        expr

                                       ____                   _______
     Set maximum output line length on CHAN  if  a  positive  integer,
     returning  previous  value.    If NIL just return previous value.
                                         Terpri
                                         Terpri
     Controls the insertion of automatic Terpri's.


 LineLength
 LineLength ___  _______  ___    _______                               ____
(LineLength LEN:{integer, NIL}): integer                               expr

     Set maximum output line length on  current  channel  OUT!*  if  a
               _______
     positive  integer,  returning previous value.  If NIL just return
                                                          Terpri
                                                          Terpri
     previous value.  Controls the insertion of automatic Terpri's.


 RPrint
 RPrint _ ____   ___                                                   ____
(RPrint U:form): NIL                                                   expr

     Print in RLISP format.  Autoloading.


 PrettyPrint
 PrettyPrint _ ____   _                                                ____
(PrettyPrint U:form): U                                                expr

                  _
     Prettyprints U.  Autoloading.


 Prin2L
 Prin2L _ ___   _                                                      ____
(Prin2L L:any): L                                                      expr

     Prin2
     Prin2                 ____
     Prin2, except that a  list  is  printed  without  the  top  level
     parens.


 ChannelSpaces
 ChannelSpaces ____ __ _______ _ _______   ___                         ____
(ChannelSpaces CHAN:io-channel N:integer): NIL                         expr

     ChannelPrin2
     ChannelPrin2  _                                                 _
     ChannelPrin2  N  spaces. Will continue across multiple lines if N
     is greater than the number of positions  in  the  output  buffer.
Input and Output              7 February 1983                    PSL Manual
page 12.12                                                     section 12.4

          POSN     LINELENGTH
          POSN     LINELENGTH
     (See POSN and LINELENGTH)


 Spaces
 Spaces _ _______   ___                                                ____
(Spaces N:integer): NIL                                                expr

     Prin2
     Prin2 _
     Prin2 N spaces.


 ChannelPrin2T
 ChannelPrin2T ____ __ _______ _ ___   ___                             ____
(ChannelPrin2T CHAN:io-channel X:any): any                             expr

                          ChannelPrin2
              _           ChannelPrin2
     Output   X   using   ChannelPrin2   and   terminate   line   with
     ChannelTerpri
     ChannelTerpri
     ChannelTerpri.


 Prin2T
 Prin2T _ ___   ___                                                    ____
(Prin2T X:any): any                                                    expr

     ChannelPrin2T
     ChannelPrin2T _
     ChannelPrin2T X to the current output channel, OUT!*.


 ChannelTab
 ChannelTab ____ __ _______ _ _______   ___                            ____
(ChannelTab CHAN:io-channel N:integer): NIL                            expr

                      _            ____
     Move to position N on channel CHAN, emitting  spaces  as  needed.
           ChannelTerPri
           ChannelTerPri                _
     Calls ChannelTerPri if past column N.


 Tab
 Tab _ _______   ___                                                   ____
(Tab N:integer): NIL                                                   expr

                                                      TerPri
                       _                              TerPri
     Move  to position N, emitting spaces as needed.  TerPri() if past
            _
     column N.

                      _________     __________
  The fluid variables PRINLEVEL and PRINLENGTH allow the  user  to  control
how  deep the printer will print and how many elements at a given level the
printer will print.  This is useful for debugging or dealing large or  deep
                                                Prin1  Prin2  PrinC  Print
                                                Prin1  Prin2  PrinC  Print
objects.   These variables affect the functions Prin1, Prin2, PrinC, Print,
    PrintF
    PrintF
and PrintF (and the corresponding Channel functions).  The documentation of
these variables is from the Common Lisp Manual.


           __________                                                ______
PRINLEVEL [Initially: Nil]                                           global

     Controls how many levels deep a nested data  object  will  print.
        _________
     If PRINLEVEL is NIL, then no control is exercised.  Otherwise the
     value  should  be  an integer, indicating the maximum level to be
     printed.  An object to be printed is at level 0.


            __________                                               ______
PRINLENGTH [Initially: Nil]                                          global

     Controls how many elements at a given level are printed.  A value
     of NIL indicates  that  there  be  no  limit  to  the  number  of
                                                  __________
     components  printed.  Otherwise the value of PRINLENGTH should be
     an integer.
PSL Manual                    7 February 1983              Input and Output
section 12.5                                                     page 12.13

12.5. Functions for Reading
12.5. Functions for Reading
12.5. Functions for Reading


12.5.1. Reading S-Expression
12.5.1. Reading S-Expression
12.5.1. Reading S-Expression


 ChannelRead
 ChannelRead ____ __ _______   ___                                     ____
(ChannelRead CHAN:io-channel): any                                     expr

                                                                 ____
     Reads  and returns the next S-expression from input channel CHAN.
     Valid input  forms  are:  vector-notation,  pair-notation,  list-
                 ______    ____ _______    ______         __________
     notation,   numbers,  code-pointers,  strings,  and  identifiers.
                                       Intern
     __________                        Intern
     Identifiers are interned (see the Intern function in Chapter  6),
                                                           ChannelRead
                                                           ChannelRead
     unless  the FLUID variable !*COMPRESSING is non-NIL.  ChannelRead
     returns the value of the global variable !$EOF!$ when the end  of
     the currently selected input channel is reached.

     ChannelRead             ChannelReadToken
     ChannelRead             ChannelReadToken
     ChannelRead  uses  the  ChannelReadToken  function,  with  tokens
     scanned according to the "Lisp scan table".  The user can  define
     similar   read   functions   for  use  with  other  scan  tables.
                          ____  _____
                          ____  _____
                          ____  _____
     ChannelRead          Read  macro
     ChannelRead          Read  macro
     ChannelRead uses the Read  macro  mechanism  to  do  S-expression
     parsing.   See section 12.5.5 for more information on read macros
     and how to add extensions.  The following read macros are defined
     initially:


     (         Starts a scan  collecting  S-expressions  according  to
               ____                                               ____
               list  or  dot notation until terminated by a ).  A pair
                  ____
               or list is returned.

     [         Starts a scan  collecting  S-expressions  according  to
                                                             ______
               vector  notation  until terminated by a ].  A vector is
               returned.

                     Read
                     Read
     '         Calls Read to get an S-expression, x, and then  returns
                         Quote
                         Quote
               the list (Quote x).

     !$EOF!$   Generates  an  error when still inside an S-expression:
               

     ***** Unexpected EOF while reading on channel

               .  Otherwise !$EOF!$ is returned.


 Read
 Read    ___                                                           ____
(Read ): any                                                           expr

     Reads and returns an S-expression from the current input channel.
                        ChannelRead
                        ChannelRead
     That is, it does a ChannelRead(IN!*).
Input and Output              7 February 1983                    PSL Manual
page 12.14                                                     section 12.5

12.5.2. Reading Files into PSL
12.5.2. Reading Files into PSL
12.5.2. Reading Files into PSL

  The  following  procedures  are  used to read complete files into PSL, by
              Open
              Open
first calling Open, and then looping until end of  file.    The  effect  is
similar  to what would happen if the file were typed into PSL.  Recall that
file names are strings, and therefore one needs  string-quotes  (")  around
file  names.  File names may be given using full system dependent file name
conventions,  including  directories  and  sub-directories,   "links"   and
"logical-device-names", as appropriate on the specific system.


        __________                                                   ______
!*ECHO [Initially: Nil]                                              switch

                   ____
     The  switch !*ECHO is used to control the echoing of input.  When
     (On Echo) is placed in an input file, the contents  of  the  file
                                                 Dskin
                                                 Dskin
     are  echoed on the standard output device.  Dskin does not change
                    ____
     the value of !*ECHO, so one may  say  (On  Echo)  before  calling
     Dskin
     Dskin
     Dskin, and the input will be echoed.


 DskIn
 DskIn _ ______   ____ ________                                        ____
(DskIn F:string): None Returned                                        expr

                Read Eval Print
                Read Eval Print                                     _
     Enters  a  Read-Eval-Print  loop  on  the contents of the file F.
     DskIn
     DskIn                                   _
     DskIn expects LISP syntax in the  file  F.    Use  the  following
     format:  (DskIn "File").


 LapIn
 LapIn _ ______   ____ ________                                        ____
(LapIn U:string): None Returned                                        expr

     Reads  a single LISP file as "quietly" as possible, i.e., it does
                                           LapIn
                                           LapIn
     not echo or return values.  Note that LapIn can be used only  for
     LISP  files.   By convention, files with the extension ".LAP" are
                            LapIn
                            LapIn
     intended to be read by LapIn.  These files are typically used  to
     load  modules  made  up  of  several  binary (also known as FASL)
                            Load
                            Load
     files.  The use of the Load function is  normally  preferable  to
            LapIn
            LapIn
     using  LapIn.    For  information  about fast loading of files of
                                                      Load      FaslIn
                                                      Load      FaslIn
     compiled functions (FASL files) see FASL and the Load and  FaslIn
     functions in Chapter 18.

  The  following  functions  are  present  in  RLISP, they can be used from
Bare-PSL by loading RLISP.


 In
 In  _ ______    ____ ________                                        _____
(In [L:string]): None Returned                                        macro

                DskIn
                DskIn
     Similar to DskIn but expects RLISP syntax in the files  it  reads
     unless  it  can determine that the files are not in RLISP syntax.
          In
          In
     Also In can take more than one file name as an argument.  On most
                          In
                          In
     systems the function In expects files with extension .LSP and .SL
     to be written in LISP syntax, not in RLISP.  This  is  convenient
     when  using both LISP and RLISP files.  It is conventional to use
     the extension .RED (or .R) for RLISP files and use  .LSP  or  .SL
PSL Manual                    7 February 1983              Input and Output
section 12.5                                                     page 12.15

     only  for  fully parenthesized LISP files.  There are some system
     programs, such as TAGS on the DEC-20, which expect RLISP files to
     have the extension .RED.

     If it is not desired to have the contents of the file  echoed  as
                                In
                                In
     it is read, either end the In command with a "$" in RLISP, as

        In "FILE1.RED","FILE2.SL"$

                               Off
                               Off ____
     or include the statement "Off ECHO;" in your file.


 PathIn
 PathIn ________ ____ ______   ____ ________                           ____
(PathIn FileName-Tail:string): None Returned                           expr

                                                                    IN
                                                                    IN
     Allows  the  use  of  a  directory  search path with the Rlisp IN
     function.  It finds a list of search paths in the fluid  variable
     PATHIN!*.   These are successively concatenated onto the front of
                            PathIn
                            PathIn
     the string argument to PathIn until an  existing  file  is  found
             FileP                    In
             FileP                    In
     (using  FileP.  If one is found, In will be invoked on this file.
     If not, a continuable error occurs.  For example on the VAX,     

         (Setq PathIn!* '( "" "/u/psl/" "/u/smith/"))
         (PathIn "foo.red")

     will  attempt  to  open  "foo.red",  then  "/u/psl/foo.red",  and
     finally "/u/smith/foo.red" until a successful open is achieved.

            Pathin
            Pathin
     To use Pathin in Bare-PSL, load PATHIN as well as RLISP.


 EvIn
 EvIn _ ______ ____   ____ ________                                    ____
(EvIn L:string-list): None Returned                                    expr

                                                           EvIn
     _                                                     EvIn
     L  must  be  a  list  of strings that are filenames.  EvIn is the
                        In                                      In
                        In                                      In
     function called by In after evaluating  its  arguments.    In  is
                                               EvIn
                                               EvIn
     useful  only  at  the  top-level,  while  EvIn can be used inside
     functions with file names passed as parameters.


12.5.3. Reading Single Characters
12.5.3. Reading Single Characters
12.5.3. Reading Single Characters


 ChannelReadChar
 ChannelReadChar _______ __ _______   _________                        ____
(ChannelReadChar CHANNEL:io-channel): character                        expr

                             _______        _______
     Reads one character (an integer) from  CHANNEL.    All  input  is
                                             _______
     defined  in terms of this function.  If CHANNEL is not open or is
     open for writing only, an error is generated.    If  there  is  a
                                                          _______
     non-zero  value in the backup buffer associated with CHANNEL, the
     buffer  is  emptied  (set  to  zero)  and  the  value   returned.
                                                     _______
     Otherwise, the reading function associated with CHANNEL is called
          _______
     with CHANNEL as argument, and the value it returns is returned by
     ChannelReadChar
     ChannelReadChar
     ChannelReadChar.
Input and Output              7 February 1983                    PSL Manual
page 12.16                                                     section 12.5

     ***** Channel not open

     ***** Channel open for write only


 ReadChar
 ReadChar    _________                                                 ____
(ReadChar ): character                                                 expr

     Reads one character from the current input channel.


 ChannelReadCH
 ChannelReadCH ____ __ _______   __                                    ____
(ChannelReadCH CHAN:io-channel): id                                    expr

          ChannelReadChar
          ChannelReadChar                  __
     Like ChannelReadChar, but returns the id for the character rather
     than its ASCII code.


 ReadCH
 ReadCH    __                                                          ____
(ReadCH ): id                                                          expr

     ChannelReadCH
     ChannelReadCH
     ChannelReadCH from the current input channel.


 ChannelUnReadChar
 ChannelUnReadChar ____ __ _______ __ _________   _________            ____
(ChannelUnReadChar CHAN:io-channel CH:character): Undefined            expr

                                  __
     The  input backup function.  CH is deposited in the backup buffer
                     ____
     associated with CHAN.  This function should be only called  after
     ChannelReadChar
     ChannelReadChar
     ChannelReadChar   is   called,   before   any  intervening  input
     operations, since it is used by the token scanner.


 UnReadChar
 UnReadChar __ _________   _________                                   ____
(UnReadChar CH:character): Undefined                                   expr

     Backup on the current input channel.


12.5.4. Reading Tokens
12.5.4. Reading Tokens
12.5.4. Reading Tokens

  The functions described here pertain to the  token  scanner  and  reader.
Globals and switches used by these functions are defined at the end of this
section.


 ChannelReadToken
 ChannelReadToken _______ __ _______    __  ______  ______             ____
(ChannelReadToken CHANNEL:io-channel): {id, number, string}            expr

     This  is  the  basic LISP token scanner.  The value returned is a
     LISP item corresponding to the next token from the input  stream.
     __
     Ids  are  interned,  unless  the  FLUID variable !*COMPRESSING is
     non-NIL.  The GLOBAL variable TOKTYPE!* is set to:


                                           __
     0         if the token is an ordinary id,
                                 ______
     1         if the token is a string,
                                 ______
     2         if the token is a number, or
PSL Manual                    7 February 1983              Input and Output
section 12.5                                                     page 12.17

     3         if the token is an unescaped delimiter.


                                                   __
     In  the  last case, the value returned is the id whose print name
     is the same as the delimiter.

     The precise behavior  of  this  function  depends  on  two  FLUID
     variables:


     CURRENTSCANTABLE!*
                              ______
               Is  bound to a vector known as a scan table.  Described
               below.

     CURRENTREADMACROINDICATOR!*
                             __
               Bound to  an  id  known  as  a  read  macro  indicator.
               Described below.


     Scan  tables  have  129  entries,  indexed  by  0 through 128.  0
                                                               _______
     through 127 are indexed by ASCII character code to get an integer
     code determining the treatment of  the  corresponding  character.
                                    _______                   __
     The  last  entry  is  not  an  integer,  but  rather  an id which
                 _________ _________
     specifies a Diphthong Indicator for the token scanner.

       [???  A  future  implementation   may   replace   the   FLUID
       [???  A  future  implementation   may   replace   the   FLUID
       [???  A  future  implementation   may   replace   the   FLUID
       CURRENTREADMACROINDICATOR!*  with  another  entry in the scan
       CURRENTREADMACROINDICATOR!*  with  another  entry in the scan
       CURRENTREADMACROINDICATOR!*  with  another  entry in the scan
       table. ???]
       table. ???]
       table. ???]

     The following encoding for characters is used.


     0 ... 9   DIGIT: indicates the character is a  digit,  and  gives
               the corresponding numeric value.
     10        LETTER: indicates that the character is a letter.
     11        DELIMITER:  indicates that the character is a delimiter
               which is not the starting character of a diphthong.
     12        COMMENT: indicates that the character begins a  comment
               terminated by an end of line.
     13        DIPHTHONG:  indicates that the character is a delimiter
               which may be the starting character of a diphthong.  (A
               diphthong is a  two  character  sequence  read  as  one
               token, i.e., "<<" or ":=".)
     14        IDESCAPE:  indicates  that  the  character is an escape
               character, to cause the following character to be taken
                             __
               as part of an id.  (Ordinarily  an  exclamation  point,
               i.e. "!".)
     15        STRINGQUOTE:  indicates  that the character is a string
               quote.  (Ordinarily a double quote, i.e. '"'.)
     16        PACKAGE:  indicates  that  the  character  is  used  to
               introduce explicit package names.  (Ordinarily "\".)
     17        IGNORE:  indicates that the character is to be ignored.
Input and Output              7 February 1983                    PSL Manual
page 12.18                                                     section 12.5

               (Ordinarily BLANK, TAB, EOL and NULL.)
     18        MINUS: indicates that the character is a minus sign.
     19        PLUS: indicates that the character is a plus sign.
     20        DECIMAL:  indicates  that  the  character  is a decimal
               point.
     21        IDSURROUND: indicates that the character is to act  for
               identifiers   as  a  string  quote  acts  for  strings.
               Although this is not used in the  default  scan  table,
               the  intended character for this function is a vertical
               bar, |.)


     System builders who wish to define their own parsers can bind  an
     appropriate  scan  table  to  CURRENTSCANTABLE!*  and  then  call
     ChannelReadToken        ChannelReadTokenWithHooks
     ChannelReadToken        ChannelReadTokenWithHooks
     ChannelReadToken   or   ChannelReadTokenWithHooks   for   lexical
     scanning.    Utility  functions  for  building  scan  tables  are
     described in the next section.

     The following standards for scanning tokens are used.


          __
        - Ids begin with a letter or  any  character  preceded  by  an
          escape  character.    They  may  contain letters, digits and
                               __
          escaped characters.  Ids may also start with a digit, if the
          first non-digit following is a plus  sign,  minus  sign,  or
          letter  other than "b" or "e".  This is to allow identifiers
          such as "1+" which occur in some LISPs.  Finally,  a  string
          of characters bounded by the IDSURROUND character is treated
                __
          as an id.

          If  !*RAISE  is  non-NIL,  unescaped  lower case letters are
                                                          __
          folded to upper case.  The maximum size of  an  id  (or  any
          other token) is currently 5000 characters.

                                                 __________
          Note:  Using  lower  case  letters  in identifiers may cause
          portability problems.  Lower case letters are  automatically
          converted  to  upper  case if the !*RAISE switch is T.  This
                                           __
          case conversion is done only for id input,  not  for  single
          character or string input.  

            [??? Can we retain input Case, but Compare RAISEd ???]
            [??? Can we retain input Case, but Compare RAISEd ???]
            [??? Can we retain input Case, but Compare RAISEd ???]

          Here  are  some  examples, using the RLISP scan table.  Note
          that the first and second examples  are  read  as  the  same
          identifier  if  !*RAISE is T.  The fourth and fifth examples
          are read as the same identifier.


             * ThisIsALongIdentifier
             * THISISALONGIDENTIFIER
             * ThisIsALongIdentifierAndDifferentFromTheOther
             * this_is_a_long_identifier_with_underscores
PSL Manual                    7 February 1983              Input and Output
section 12.5                                                     page 12.19

             * this!_is!_a!_long!_identifier!_with!_underscores
             * an!-identifier!-with!-dashes
             * !*RAISE
             * !2222


          The  following  examples show the same identifiers in a form
          accepted by the LISP scan table.  Note that most  characters
          are  treated  as  letters by the LISP scan table, while they
          are treated as delimiters by the RLISP scan table.


             * ThisIsALongIdentifier
             * THISISALONGIDENTIFIER
             * ThisIsALongIdentifierAndDifferentFromTheOther
             * this_is_a_long_identifier_with_underscores
             * this!_is!_a!_long!_identifier!_with!_underscores
             * an-identifier-with-dashes
             * *RAISE
             * !2222


          ______
        - Strings begin with  a  double  quote  (")  and  include  all
          characters up to a closing double quote.  A double quote can
                              ______                           ______
          be  included  in  a string by doubling it.  An empty string,
          consisting of only the enclosing quote  marks,  is  allowed.
                               ______
          The  characters of a string are not affected by the value of
          the !*RAISE.  Examples:


             * "This is a string"
             * "This is a ""string"""
             * ""


          ____ _______
        - Code-pointers cannot be read directly, but  can  be  printed
          and      constructed.           Currently     printed     as
                 ________ _____ _____ _______
          #<Code argument-count octal-address>.

          _______
        - Integers begin with a digit, optionally preceded by a  +  or
          -  sign, and consist only of digits.  The GLOBAL input radix
          is 10; there is no way to change this.  However, numbers  of
          different  radices  may be read by the following convention.
          A decimal number from 2 to 36 followed by a sharp sign  (#),
          causes  the  digits (and possibly letters) that follow to be
                                                           2
          read in the radix of the number preceding the  #.   Thus  63
_______________

  2
   Octal  numbers can also be written as a string of digits followed by the
letter "B".  This "feature" may be removed in the future.
Input and Output              7 February 1983                    PSL Manual
page 12.20                                                     section 12.5

          may  be  entered  as  8#77,  or  255 as 16#ff or 16#FF.  The
          output radix can be changed, by setting  OUTPUTBASE!*.    If
                                                  _______
          OutPutBase!*  is  not  10,  the printed integer appears with
          appropriate radix.  Leading zeros are suppressed and a minus
                                                _______
          sign  precedes  the  digits  if  the  integer  is  negative.
          Examples:


             * 100
             * +5234
             * -8#44 (equal to -36)


            [???  Should  we  permit  trailing  .  in  integers  for
            [???  Should  we  permit  trailing  .  in  integers  for
            [???  Should  we  permit  trailing  .  in  integers  for
            compatibility with some LISPs and require digits on each
            compatibility with some LISPs and require digits on each
            compatibility with some LISPs and require digits on each
            side of . for floats ???]
            side of . for floats ???]
            side of . for floats ???]

          _____
        - Floats have a period and/or a letter "e"  or  "E"  in  them.
                                            _____
          Any  of the following are read as floats.  The value appears
          in the format [-]n.nn...nnE[-]mm if  the  magnitude  of  the
          number  is  too  large  or  small to display in [-]nnnn.nnnn
          format.    The  crossover  point  is   determined   by   the
                                       _____
          implementation.    In  BNF,  floats  are  recognized  by the
          grammar:


           <base>       ::= <unsigned-integer>.|
                            .<unsigned-integer>|
                            <unsigned-integer>.<unsigned-integer>
           <ebase>      ::= <base>|<unsigned-integer>
           <unsigned-float> ::= <base>|
                                <ebase>e<unsigned-integer>|
                                <ebase>e-<unsigned-integer>|
                                <ebase>e+<unsigned-integer>|
                                <ebase>E<unsigned-integer>|
                                <ebase>E-<unsigned-integer>|
                                <ebase>E+<unsigned-integer>
           <float>          ::= <unsigned-float>|
                                +<unsigned-float>|
                                -<unsigned-float>


          That is:


             * [+|-][nnn][.]nnn{e|E}[+|-]nnn
             * nnn.
             * .nnn
             * nnn.nnn


          Examples:
PSL Manual                    7 February 1983              Input and Output
section 12.5                                                     page 12.21

             * 1e6
             * .2
             * 2.
             * 2.0
             * -1.25E-9


 RAtom
 RAtom     __  ______  ______                                          ____
(RAtom ): {id, number, string}                                         expr

     Reads  a  token  from  the  current  input  channel.  (Not called
     ReadToken
     ReadToken
     ReadToken for historical reasons.)

       [??? Should we bind CurrentScanTable!* for this function  too
       [??? Should we bind CurrentScanTable!* for this function  too
       [??? Should we bind CurrentScanTable!* for this function  too
       ???]
       ???]
       ???]


               __________                                            ______
!*COMPRESSING [Initially: NIL]                                       switch

                                      ChannelReadToken
                                      ChannelReadToken
     If  !*COMPRESSING  is  non-NIL,  ChannelReadToken does not intern
     __
     ids.


                 __________                                          ______
!*EOLINSTRINGOK [Initially: NIL]                                     switch

     If !*EOLINSTRINGOK is non-NIL, the warning message 

     *** STRING CONTINUED OVER END-OF-LINE

     is suppressed.


         __________                                                  ______
!*RAISE [Initially: T]                                               switch

                                                     __
     If !*RAISE is non-NIL, all characters input for ids  through  PSL
     input  functions  are  raised  to upper case.  If !*RAISE is NIL,
                                    ______
     characters are input as is.  A string is unaffected by !*RAISE.


                    __________                                       ______
CURRENTSCANTABLE!* [Initially: ]                                     global

                                                    Read
                                                    Read
     This variable is set to LISPSCANTABLE!* by the Read function (the
     "Lisp  syntax"  reader).    The   RLISP   reader   sets   it   to
     RLISPSCANTABLE!*  or  LISPSCANTABLE!*  depending on the syntax it
     expects.
Input and Output              7 February 1983                    PSL Manual
page 12.22                                                     section 12.5

                 __________                                          ______
LISPSCANTABLE!* [Initially: as shown in following table]             global


0 ^@ IGNORE       32   IGNORE           64 @ LETTER     96 ` DELIMITER
1 ^A LETTER       33 ! IDESCAPECHAR     65 A LETTER     97 a LETTER
2 ^B LETTER       34 " STRINGQUOTE      66 B LETTER     98 b LETTER
3 ^C LETTER       35 # LETTER           67 C LETTER     99 c LETTER
4 ^D LETTER       36 $ LETTER           68 D LETTER     100 d LETTER
5 ^E LETTER       37 % COMMENTCHAR      69 E LETTER     101 e LETTER
6 ^F LETTER       38 & LETTER           70 F LETTER     102 f LETTER
7 ^G LETTER       39 ' DELIMITER        71 G LETTER     103 g LETTER
8 ^H LETTER       40 ( DELIMITER        72 H LETTER     104 h LETTER
9 <tab> IGNORE    41 ) DELIMITER        73 I LETTER     105 i LETTER
10 <lf> IGNORE    42 * LETTER           74 J LETTER     106 j LETTER
11 ^K LETTER      43 + PLUSSIGN         75 K LETTER     107 k LETTER
12 ^L IGNORE      44 , DIPHTHONGSTART   76 L LETTER     108 l LETTER
13 <cr> IGNORE    45 - MINUSSIGN        77 M LETTER     109 m LETTER
14 ^N LETTER      46 . DECIMALPOINT     78 N LETTER     110 n LETTER
15 ^O LETTER      47 / LETTER           79 O LETTER     111 o LETTER
16 ^P LETTER      48 0 DIGIT            80 P LETTER     112 p LETTER
17 ^Q LETTER      49 1 DIGIT            81 Q LETTER     113 q LETTER
18 ^R LETTER      50 2 DIGIT            82 R LETTER     114 r LETTER
19 ^S LETTER      51 3 DIGIT            83 S LETTER     115 s LETTER
20 ^T LETTER      52 4 DIGIT            84 T LETTER     116 t LETTER
21 ^U LETTER      53 5 DIGIT            85 U LETTER     117 u LETTER
22 ^V LETTER      54 6 DIGIT            86 V LETTER     118 v LETTER
23 ^W LETTER      55 7 DIGIT            87 W LETTER     119 w LETTER
24 ^X LETTER      56 8 DIGIT            88 X LETTER     120 x LETTER
25 ^Y LETTER      57 9 DIGIT            89 Y LETTER     121 y LETTER
26 ^Z DELIMITER   58 : LETTER           90 Z LETTER     122 z LETTER
27 $ LETTER       59 ; LETTER           91 [ DELIMITER  123 { LETTER
28 ^\ LETTER      60 < LETTER           92 \ PACKAGE    124 | LETTER
29 ^] LETTER      61 = LETTER           93 ] DELIMITER  125 } LETTER
30 ^^ LETTER      62 > LETTER           94 ^ LETTER     126 ~ LETTER
31 ^_ LETTER      63 ? LETTER           95 _ LETTER     127 <rubout>
                                                              LETTER


        _________   _________
  The   Diphthong   Indicator   in   the  128th  entry  is  the  identifier
LISPDIPTHONG.

  [??? Note that LISPDIPTHONG should be spelled LISPDIPHTHONG, this  will
  [??? Note that LISPDIPTHONG should be spelled LISPDIPHTHONG, this  will
  [??? Note that LISPDIPTHONG should be spelled LISPDIPHTHONG, this  will
  probably be corrected in the future. ???]
  probably be corrected in the future. ???]
  probably be corrected in the future. ???]
PSL Manual                    7 February 1983              Input and Output
section 12.5                                                     page 12.23

                  __________                                         ______
RLISPSCANTABLE!* [Initially: as shown in following table]            global


0 ^@ IGNORE       32   IGNORE           64 @ DELIMITER  96 ` DELIMITER
1 ^A DELIMITER    33 ! IDESCAPECHAR     65 A LETTER     97 a LETTER
2 ^B DELIMITER    34 " STRINGQUOTE      66 B LETTER     98 b LETTER
3 ^C DELIMITER    35 # DELIMITER        67 C LETTER     99 c LETTER
4 ^D DELIMITER    36 $ DELIMITER        68 D LETTER     100 d LETTER
5 ^E DELIMITER    37 % COMMENTCHAR      69 E LETTER     101 e LETTER
6 ^F DELIMITER    38 & DELIMITER        70 F LETTER     102 f LETTER
7 ^G DELIMITER    39 ' DELIMITER        71 G LETTER     103 g LETTER
8 ^H DELIMITER    40 ( DELIMITER        72 H LETTER     104 h LETTER
9 <tab> IGNORE    41 ) DELIMITER        73 I LETTER     105 i LETTER
10 <lf> IGNORE    42 * DIPHTHONGSTART   74 J LETTER     106 j LETTER
11 ^K DELIMITER   43 + DELIMITER        75 K LETTER     107 k LETTER
12 ^L IGNORE      44 , DELIMITER        76 L LETTER     108 l LETTER
13 <cr> IGNORE    45 - DELIMITER        77 M LETTER     109 m LETTER
14 ^N DELIMITER   46 . DECIMALPOINT     78 N LETTER     110 n LETTER
15 ^O DELIMITER   47 / DELIMITER        79 O LETTER     111 o LETTER
16 ^P DELIMITER   48 0 DIGIT            80 P LETTER     112 p LETTER
17 ^Q DELIMITER   49 1 DIGIT            81 Q LETTER     113 q LETTER
18 ^R DELIMITER   50 2 DIGIT            82 R LETTER     114 r LETTER
19 ^S DELIMITER   51 3 DIGIT            83 S LETTER     115 s LETTER
20 ^T DELIMITER   52 4 DIGIT            84 T LETTER     116 t LETTER
21 ^U DELIMITER   53 5 DIGIT            85 U LETTER     117 u LETTER
22 ^V DELIMITER   54 6 DIGIT            86 V LETTER     118 v LETTER
23 ^W DELIMITER   55 7 DIGIT            87 W LETTER     119 w LETTER
24 ^X DELIMITER   56 8 DIGIT            88 X LETTER     120 x LETTER
25 ^Y DELIMITER   57 9 DIGIT            89 Y LETTER     121 y LETTER
26 ^Z DELIMITER   58 : DIPHTHONGSTART   90 Z LETTER     122 z LETTER
27 $ DELIMITER    59 ; DELIMITER        91 [ DELIMITER  123 { DELIMITER
28 ^\ DELIMITER   60 < DIPHTHONGSTART   92 \ PACKAGE    124 | DELIMITER
29 ^] DELIMITER   61 = DELIMITER        93 ] DELIMITER  125 } DELIMITER
30 ^^ DELIMITER   62 > DIPHTHONGSTART   94 ^ DELIMITER  126 ~ DELIMITER
31 ^_ DELIMITER   63 ? DELIMITER        95 _ LETTER     127 <rubout>
                                                              DELIMITER


        _________   _________
  The   Diphthong   Indicator   in   the  128th  entry  is  the  identifier
RLISPDIPTHONG.

  [??? Note that RLISPDIPTHONG should  be  spelled  RLISPDIPHTHONG,  this
  [??? Note that RLISPDIPTHONG should  be  spelled  RLISPDIPHTHONG,  this
  [??? Note that RLISPDIPTHONG should  be  spelled  RLISPDIPHTHONG,  this
  will probably be corrected in the future. ???]
  will probably be corrected in the future. ???]
  will probably be corrected in the future. ???]

  [??? What about the RlispRead scantable ???]
  [??? What about the RlispRead scantable ???]
  [??? What about the RlispRead scantable ???]

  [???  Perhaps  describe one basic table, and changes from one to other,
  [???  Perhaps  describe one basic table, and changes from one to other,
  [???  Perhaps  describe one basic table, and changes from one to other,
  since mostly the same ???]
  since mostly the same ???]
  since mostly the same ???]
Input and Output              7 February 1983                    PSL Manual
page 12.24                                                     section 12.5

              __________                                             ______
OUTPUTBASE!* [Initially: 10]                                         global

     This global can be set to control the radix in which integers are
     printed out.  If the radix is not 10, the radix is given before a
     sharp sign, e.g. 8#20 is"20" in base 8, or 16.


           __________                                                ______
TOKTYPE!* [Initially: 3]                                             global

     ChannelReadToken
     ChannelReadToken
     ChannelReadToken sets TOKTYPE!* to:


                                           __
     0         if the token is an ordinary id,
                                 ______
     1         if the token is a string,
                                 ______
     2         if the token is a number, or
     3         if the token is an unescaped delimiter.


                                                   __
     In  the  last case, the value returned is the id whose print name
     is the same as the delimiter.


12.5.5. Read Macros
12.5.5. Read Macros
12.5.5. Read Macros

                               Channel  Token
                               Channel  Token
  A function of two arguments (Channel, Token) can be associated  with  any
DELIMITER  or DIPHTHONG token (i.e. those that have TOKTYPE!*=3) by calling
PutReadMacro                                      ChannelReadTokenWithHooks
PutReadMacro     _________                        ChannelReadTokenWithHooks
PutReadMacro.  A ReadMacro function is called by  ChannelReadTokenWithHooks
                                                          ChannelReadToken
                                                          ChannelReadToken
if  the appropriate token with TOKTYPE!*=3 is returned by ChannelReadToken.
This function can then take over the reading (or scanning) process, finally
returning a token (actually an S-expression) to be returned in place of the
token itself.

                                              Quote
                                              Quote
  Example:  The quote mark, 'x converting to (Quote  x),  is  done  by  the
                                                      PutReadMacro
                                                      PutReadMacro
following  example  which  makes  use of the function PutReadMacro which is
defined in Section 12.6.

   In LISP:

       (de DOQUOTE (CHANNEL TOKEN))
          (LIST 'QUOTE  (CHANNELREAD CHANNEL))

       (PUTREADMACRO LISPSCANTABLE!* '!' (FUNCTION DOQUOTE))

    _________
  A ReadMacro is installed on the property list of the macro-character as a
function under the indicators  'LISPREADMACRO,  'RLISPREADMACRO,  etc.    A
_________
Diphthong  is  installed  on  the  property  list of the first character as
(second-character  .  diphthong)  under  the   indicators   'LISPDIPHTHONG,
'RLISPDIPHTHONG, etc.
PSL Manual                    7 February 1983              Input and Output
section 12.6                                                     page 12.25

12.6. Scan Table Utility Functions
12.6. Scan Table Utility Functions
12.6. Scan Table Utility Functions

  The  following  functions  are  provided  to  manage  scan tables, in the
READ-UTILS module (use via LOAD READ-UTILS):


 PrintScanTable
 PrintScanTable _____ ______   ___                                     ____
(PrintScanTable TABLE:vector): NIL                                     expr

     Prints the entire scantable, gives the 0 ... 127 entries with the
     name of the character class.  Also prints the indicator used  for
     diphthongs.  

       [???  Make smarter, reduce output, use nice names for control
       [???  Make smarter, reduce output, use nice names for control
       [???  Make smarter, reduce output, use nice names for control
       characters, ala EMODE. ???]
       characters, ala EMODE. ???]
       characters, ala EMODE. ???]


 CopyScanTable
 CopyScanTable ________  ______  ___    ______                         ____
(CopyScanTable OLDTABLE:{vector, NIL}): vector                         expr

     Copies the existing scantable  (or  CURRENTSCANTABLE!*  if  given
                      GenSym
                      GenSym
     NIL).  Currently GenSym()'s the indicators used for diphthongs.

       [???  Change when we use Property Lists in extra slots of the
       [???  Change when we use Property Lists in extra slots of the
       [???  Change when we use Property Lists in extra slots of the
       Scan-Table ???]
       Scan-Table ???]
       Scan-Table ???]


 PutDipthong
 PutDipthong _____ ______   __ __  ___ __  ___ __   ___                ____
(PutDipthong TABLE:vector,  D1:id  ID2:id  DIP:id): NIL                expr

              ___                              ___             ___
     Installs DIP as the name of the diphthong ID1 followed by ID2  in
     the given scan table.

       [???  Note  that  PutDipthong should be spelled PutDiphthong,
       [???  Note  that  PutDipthong should be spelled PutDiphthong,
       [???  Note  that  PutDipthong should be spelled PutDiphthong,
       this will probably be corrected in the future. ???]
       this will probably be corrected in the future. ???]
       this will probably be corrected in the future. ???]


 PutReadMacro
 PutReadMacro _____ ______  ___ __  _____ __   ___                     ____
(PutReadMacro TABLE:vector  ID1:id  FNAME:id): NIL                     expr

                                       ____  _____
                                       ____  _____
                                       ____  _____
                                       Read  macro
              _____                    Read  macro
     Installs FNAME as the name of the Read  macro  function  for  the
                                                                   ___
                                                                   ___
                                                                   ___
                                                                  [not
                               ___                                [not
     delimiter  or  diphthong  ID1  in  the  given  scan  table.  [not
     ___________ ___
     ___________ ___
     ___________ ___
     implemented yet]
     implemented yet]
     implemented yet]



12.7. I/O to and from Lists and Strings
12.7. I/O to and from Lists and Strings
12.7. I/O to and from Lists and Strings


 Digit
 Digit _ ___   _______                                                 ____
(Digit U:any): boolean                                                 expr

                  _
     Returns T if U is a digit, otherwise NIL.  Effectively this is:

        (de DIGIT (U)
          (IF (MEMQ U '(!0 !1 !2 !3 !4 !5 !6 !7 !8 !9)) T NIL))
Input and Output              7 February 1983                    PSL Manual
page 12.26                                                     section 12.7

 Liter
 Liter _ ___   _______                                                 ____
(Liter U:any): boolean                                                 expr

                     _
     Returns  T  if  U  is a character of the alphabet, NIL otherwise.
     This is effectively:

        (de LITER(U)
          (IF (MEMQ U '(A B C D E F G H I J K L M
            N O P Q R S T U V W X Y Z a b c d e f
            g h i j k l m n o p q r s t u v w x y
            z))  T NIL)) 


 Explode
 Explode _ ___   __ ____                                               ____
(Explode U:any): id-list                                               expr

     Explode
     Explode
     Explode takes the constituent characters of an  S-expression  and
              ____                     __
     forms  a list of single character ids.  It is implemented via the
              ChannelPrin1
              ChannelPrin1         ____
     function ChannelPrin1, with a list rather than a file or terminal
                                        ____
     as destination.   Returned  is  a  list  of  interned  characters
                                                                    _
     representing  the  characters  required  to print the value of U.
     Example: 


        - Explode 'FOO; => (F O O)

        - Explode '(A . B); => (!( A !  !. ! B !))


  [???  add print macros.  cf. UCI lisp ???]
  [???  add print macros.  cf. UCI lisp ???]
  [???  add print macros.  cf. UCI lisp ???]


 Explode2
 Explode2 _  ____   ______    __ ____                                  ____
(Explode2 U:{atom}-{vector}): id-list                                  expr

     Prin2            Explode
     Prin2            Explode
     Prin2 version of Explode.


 Compress
 Compress _ __ ____    ____   ______                                   ____
(Compress U:id-list): {atom}-{vector}                                  expr

     _      ____
     U is a list of single character identifiers which is built into a
                                               ______    ______
     PSL entity and returned.  Recognized are  numbers,  strings,  and
     __________
     identifiers   with   the   escape   character  prefixing  special
     characters.  The formats of these items appear in the  "Primitive
                                          __________      ___
     Data Types" Section, Section 4.1.2.  Identifiers are not interned
                              ________ _______
     on  the  ID-HASH-TABLE.  Function pointers may not be compressed.
                                          _
     If an entity cannot be parsed out of U  or  characters  are  left
     over after parsing an error occurs:  

     ***** Poorly formed atom in COMPRESS 
PSL Manual                    7 February 1983              Input and Output
section 12.7                                                     page 12.27

 Implode
 Implode _ __ ____   ____                                              ____
(Implode U:id-list): atom                                              expr

     Compress
     Compress      __
     Compress with ids interned.


 FlatSize
 FlatSize _ ___   _______                                              ____
(FlatSize U:any): integer                                              expr

                         Prin1
                         Prin1
     Character length of Prin1 S-expression.


 FlatSize2
 FlatSize2 _ ___   _______                                             ____
(FlatSize2 U:any): integer                                             expr

     Prin2            flatsize
     Prin2            flatsize
     Prin2 version of flatsize.


 BldMsg
 BldMsg ______ ______   ____ ___    ______                             ____
(BldMsg FORMAT:string, [ARGS:any]): string                             expr

     PrintF                 BldMsg
     PrintF      ______     BldMsg             ______
     PrintF  to  string.    BldMsg  returns  a string stating that the
     ______
     string could not be constructed if overflow occurs.



12.8. Example of Simple I/O in PSL
12.8. Example of Simple I/O in PSL
12.8. Example of Simple I/O in PSL

  In the following example a list of S-expressions is read, one  expression
at  a  time,  from  a  file  STUFF.IN  and  is written to a file STUFF.OUT.
Following is the contents of STUFF.IN:

   (r e d)
   (a b c)
   (1 2 3 4)
   "ho ho ho"
   6.78
   5000
   xyz

  The following shows the execution of the function TRYIO.             
Input and Output              7 February 1983                    PSL Manual
page 12.28                                                     section 12.8

   @psl:psl
   PSL 3.1, 15-Nov-82
   1 lisp> (On Echo)
   NIL
   2 lisp> (Dskin "Exampio.Sl")
   (De Tryio (Fil1 Fil2)
      (Prog (Oldin Oldout Exp)
         (Setq Oldin (Rds (Open Fil1 'input)))
         (Setq Oldout (Wrs (Open Fil2 'output)))
         (While (Neq (Setq Exp (Read)) !$EOF!$)
                (Print Exp))
         (Close (Rds Oldin))
         (Close (Wrs Oldout))))
   TRYIO
   NIL
   3 lisp> (Off Echo)
   NIL
   4 lisp> (Tryio "Stuff.In" "Stuff.Out")
   NIL

  The output file STUFF.OUT contains the following.

   (R E D)
   (A B C)
   (1 2 3 4)
   "ho ho ho"
   6.78
   5000
   XYZ


REDUCE Historical
REDUCE Sourceforge Project | Historical SVN Repository | GitHub Mirror | SourceHut Mirror | NotABug Mirror | Chisel Mirror | Chisel RSS ]