File r34/doc/spde.doc artifact caf122fc97 part of check-in 72f75b2f9c




            The Package SPDE for Determining Symmetries

                  of Partial Differential Equations

                         User's Manual



                        Fritz Schwarz
                        GMD, Institut F1
                        Postfach 1240
                        5205 St. Augustin
                        West Germany

                        Tel. 02241-142782
                        EARN ID: GF1002@DBNGMD21



 1. General Information.

 The package SPDE provides a set of functions which may be applied
 to determine the symmetry group of Lie-or point-symmetries of a
 given system of partial differential equations.  Preferably it is
 used interactively on a computer terminal. In many cases the
 determining system is solved completely automatically. In some
 other cases the user has to provide some additional input
 information for the solution algorithm to terminate. The package
 should only be used in compiled form.

 For all theoretical questions, a description of the algorithm and
 numerous examples the following articles should be consulted:
 "Automatically Determining Symmetries of Partial Differential
 Equations", Computing vol. 34, page 91-106(1985) and vol. 36, page
 279-280(1986), "Symmetries of Differential Equations: From Sophus
 Lie to Computer Algebra", SIAM Review, to appear, and Chapter 2
 of the Lecture Notes "Computer Algebra and Differential Equations
 of Mathematical Physics'', to appear.


 2. Description of the System Functions and Variables.

 The symmetry analysis of partial differential equations logically
 falls into three parts. Accordingly the most important functions
 provided by the package are:

  ----------------------------------------------------------------
  |   Function name   |             Operation                    |
  |--------------------------------------------------------------|
  |CRESYS(<arguments>)|   Constructs determining system          |
  |--------------------------------------------------------------|
  |     SIMPSYS()     |     Solves determining system            |
  |--------------------------------------------------------------|
  |     RESULT()      |     Prints infinitesimal generators      |
  |                   |           and commutator table           |
  ----------------------------------------------------------------
                         Table 1.

 Some other useful functions for obtaining various kinds of output
 are:

  ----------------------------------------------------------------
  |     PRSYS()      |        Prints determining system          |
  |--------------------------------------------------------------|
  |     PRGEN()      |     Prints infinitesimal generators       |
  |--------------------------------------------------------------|
  |    COMM(U,V)     | Prints commutator of generators U and V   |
  ----------------------------------------------------------------
                         Table 2.

 There are several global variables defined by the system which
 should not be used for any other purpose than that given
 in Tables 3 and 4. The three globals of the type integer are:

  ---------------------------------------------------------------
  |    Variable name     |               Meaning                |
  |----------------------|--------------------------------------|
  |         NN           | Number of independent variables      |
  |----------------------|--------------------------------------|
  |         MM           |   Number of dependent variables      |
  |----------------------|--------------------------------------|
  |   PCLASS=0, 1 or 2   |     Controls amount of output        |
  ---------------------------------------------------------------
                            Table 3.

 In addition there are the following global variables of type
 operator:

  ---------------------------------------------------------------
  |    Variable name     |               Meaning                |
  |----------------------|--------------------------------------|
  |        X(I)          |    Independent variable  x           |
  |                      |                           i          |
  |----------------------|--------------------------------------|
  |                      |                         alfa         |
  |      U(ALFA)         |     Dependent variable u             |
  |----------------------|--------------------------------------|
  |                      |                alfa                  |
  |     U(ALFA,I)        | Derivative of u     w.r.t. x         |
  |                      |                             i        |
  |----------------------|--------------------------------------|
  |      DEQ(I)          |    i-th differential equation        |
  |----------------------|--------------------------------------|
  |      SDER(I)         | Derivative w.r.t. which DEQ(I)       |
  |                      |          is resolved                 |
  |----------------------|--------------------------------------|
  |       GL(I)          | i-th equation of determining system  |
  |----------------------|--------------------------------------|
  |       GEN(I)         |    i-th infinitesimal generator      |
  |----------------------|--------------------------------------|
  |   XI(I), ETA(ALFA)   |     See definition given in the      |
  |                      |                                      |
  |     ZETA(ALFA,I)     |    references quoted in Section 1.   |
  |----------------------|--------------------------------------|
  |       C(I)           | i-th function used for substitution  |
  ---------------------------------------------------------------
                           Table 4.


 The differential equations of the system at issue have to be assigned
 as values to the operator deq i applying the notation which is
 defined in Table 4. The entries in the third and the last line of
 that Table have obvious extensions to higher derivatives.

 The derivative w.r.t. which the i-th differential equation deq i is
 resolved has to be assigned to sder i. Exception: If there is a
 single differential equation and no assignment has been made by the
 user, the highest derivative is taken by default.

 When the appropriate assignments are made to the variable deq,
 the values of NN and MM ( Table 2 ) are determined automatically,
 i.e. they have not to be assigned by the user.

 The function CRESYS may be called with any number of arguments,
 i.e.

  CRESYS(); or CRESYS(deq 1,deq 2,... );

 are legal calls. If it is called without any argument, all current
 assignments to deq are taken into account. Example: If deq 1, deq 2
 and deq 3 have been assigned a differential equation and the
 symmetry group of the full system comprising all three equations
 is desired, equivalent calls are

   CRESYS();   or   CRESYS(deq 1,deq 2,deq 3);

 The first alternative saves some typing. If later in the session
 the symmetry group of deq 1 alone has to be determined, the correct
 call is

   CRESYS deq 1;

 After the determining system has bee created, SIMPSYS which has
 no arguments may be called for solving it. The amount of
 intermediate output produced by SIMPSYS is controled by the
 global variable PCLASS with the default value 0. With PCLASS equal
 to 0, no intermediate steps are shown. With PCLASS equal to 1, all
 intermediate steps are displayed so that the solution algorithm
 may be followed through in detail. Each time the algorithm passes
 through the top of the main solution loop the message

   Entering main loop

 is written. PCLASS equal 2 produces a lot of LISP output and is of
 no interest for the normal user.

 If with PCLASS=0 the procedure SIMPSYS terminates without any
 response, the determining system is completely solved.  In some
 cases SIMPSYS does not solve the determining system completely in a
 single run. In general this is true if there are only genuine
 differential equations left which the algorithm cannot handle at
 present. If a case like this occurs, SIMPSYS returns the remaining
 equations of the determining system. To proceed with the solution
 algorithm, appropriate assignments have to be transmitted by the
 user, e.g. the explicit solution for one of the returned
 differential equations. Any new functions which are introduced
 thereby must be operators of the form c(k) with the correct
 dependencies generated by a depend statement ( see REDUCE User's
 Guide ). Its enumeration has to be chosen in agreement with the
 current number of functions which have alreday been introduced.
 This value is returned by SIMPSYS too.

 After the determining system has been solved, the procedure RESULT
 which has no arguments may be called. It displays the infinitesimal
 generators and its non-vanishing commutators.


 2. How to Use the Package. Examples.

 In this Section it is explained by way of several examples how the
 package SPDE is used interactively to determine the symmetry group
 of partial differential equations. Consider first the diffusion
 equation  which in the notation given above may be written as

  deq 1:=u(1,1)+u(1,2,2);

 It has been assigned as the value of deq 1 by this statement.
 There is no need to assign a value to sder 1 here because the
 system comprises only a single equation.

 The determining system is constructed by calling

  CRESYS(); or CRESYS deq 1;

 The latter call is compulsory if there are other assignments to the
 operator deq i than for i=1.

 The error message

  ***** Differential equations not defined

 appears if there are no differential equations assigned to any deq.

 If the user wants the determining system displayed for inspection
 before starting the solution algorithm he may call

  PRSYS();

 and gets the answer

  GL(1):=2*DF(ETA(1),U(1),X(2)) - DF(XI(2),X(2),2) - DF(XI(2),X(1))

  GL(2):=DF(ETA(1),U(1),2) - 2*DF(XI(2),U(1),X(2))

  GL(3):=DF(ETA(1),X(2),2) + DF(ETA(1),X(1))

  GL(4):=DF(XI(2),U(1),2)

  GL(5):=DF(XI(2),U(1)) - DF(XI(1),U(1),X(2))

  GL(6):=2*DF(XI(2),X(2)) - DF(XI(1),X(2),2) - DF(XI(1),X(1))

  GL(7):=DF(XI(1),U(1),2)

  GL(8):=DF(XI(1),U(1))

  GL(9):=DF(XI(1),X(2))

  The remaining dependencies

  XI(2) depends on U(1),X(2),X(1)

  XI(1) depends on U(1),X(2),X(1)

  ETA(1) depends on U(1),X(2),X(1)

 The last message means that all three functions XI(1), XI(2) and
 ETA(1) depend on X(1), X(2) and U(1). Without this information the
 nine equations GL(1) to GL(9) forming the determining system are
 meaningless. Now the solution algorithm may be activated by calling

   SIMPSYS();

 If the print flag PCLASS has its default value which is 0 no inter-
 mediate output is produced and the answer is

  Determining system is not completely solved

  The remaining equations are

  GL(1):=DF(C(1),X(2),2) + DF(C(1),X(1))

  Number of functions is 16

  The remaining dependencies

  C(1) depends on X(2),X(1)

 With PCLASS equal to 1 about 6 pages of intermediate output are
 obtained. It allows the user to follow through each step of the
 solution algorithm.

 In this example the algorithm did not solve the determining system
 completely as it is shown by the last message. This was to be
 expected because the diffusion equation is linear and therefore the
 symmetry group contains a generator depending on a function which
 solves the original differential equation. In cases like this the
 user has to provide some additional information to the system so
 that the solution algorithm may continue. In the example under
 consideration the appropriate input is

   DF(C(1),X(1)) := - DF(C(1),X(2),2);

 If now the solution algorithm is activated again by

   SIMPSYS();

 the solution algorithm terminates without any further message, i.e.
 there are no equations of the determining system left unsolved. To
 obtain the symmetry generators one has to say finally

  RESULT();

 and obtains the answer

  The differential equation

  DEQ(1):=U(1,2,2) + U(1,1)


  The symmetry generators are

  GEN(1):= DX(1)

  GEN(2):= DX(2)

  GEN(3):= 2*DX(2)*X(1) + DU(1)*U(1)*X(2)

  GEN(4):= DU(1)*U(1)

  GEN(5):= 2*DX(1)*X(1) + DX(2)*X(2)

                       2
  GEN(6):= 4*DX(1)*X(1)

         + 4*DX(2)*X(2)*X(1)

                           2
           + DU(1)*U(1)*(X(2)  - 2*X(1))

  GEN(7):= DU(1)*C(1)

  The remaining dependencies

  C(1) depends on X(2),X(1)


  Constraints

  DF(C(1),X(1)):= - DF(C(1),X(2),2)


  The non-vanishing commutators of the finite subgroup


  COMM(1,3):= 2*DX(2)

  COMM(1,5):= 2*DX(1)

  COMM(1,6):= 8*DX(1)*X(1) + 4*DX(2)*X(2) - 2*DU(1)*U(1)

  COMM(2,3):= DU(1)*U(1)

  COMM(2,5):= DX(2)

  COMM(2,6):= 4*DX(2)*X(1) + 2*DU(1)*U(1)*X(2)

  COMM(3,5):=  - (2*DX(2)*X(1) + DU(1)*U(1)*X(2))

                          2
  COMM(5,6):= 8*DX(1)*X(1)

            + 8*DX(2)*X(2)*X(1)

                                2
            + 2*DU(1)*U(1)*(X(2)  - 2*X(1))

 The message "Constraints" which appears after the symmetry
 generators are displayed means that the function c(1) depends on
 x(1) and x(2) and satisfies the diffusion equation.

 More examples which may used for test runs are given in the
 Appendix.

 If the user wants to test a certain ansatz of a symmetry generator
 for given differential equations, the correct proceeding is as
 follows. Create the determining system as described above. Make
 the appropriate assignements for the generator and call PRSYS()
 after that.  The determining system with this ansatz substituted
 is returned.  Example: Assume again that the determining system
 for the diffusion equation has been created. To check the
 correctnes for example of generator GEN 3 which has been obtained
 above, the assignments

  XI(1):=0;  XI(2):=2*X(1);  ETA(1):=X(2)*U(1);

 have to be made. If now PRSYS() is called all GL(K) are zero
 proving the correctness of this generator.

 Sometimes a user only wants to know some of the functions ZETA for
 for various values of its possible arguments and given values of MM
 and NN. In these cases the user has to assign the desired values of
 MM and NN and may call the ZETA's after that. Example:

  MM:=1;  NN:=2;

  FACTOR U(1,2),U(1,1),U(1,1,2),U(1,1,1);

  ON LIST;

  ZETA(1,1);

  -U(1,2)*U(1,1)*DF(XI(2),U(1))

  -U(1,2)*DF(XI(2),X(1))

         2
  -U(1,1) *DF(XI(1),U(1))

  +U(1,1)*(DF(ETA(1),U(1)) -DF(XI(1),X(1)))

  +DF(ETA(1),X(1))


  ZETA(1,1,1);

  -2*U(1,1,2)*U(1,1)*DF(XI(2),U(1))

  -2*U(1,1,2)*DF(XI(2),X(1))

  -U(1,1,1)*U(1,2)*DF(XI(2),U(1))

  -3*U(1,1,1)*U(1,1)*DF(XI(1),U(1))

  +U(1,1,1)*(DF(ETA(1),U(1)) -2*DF(XI(1),X(1)))

                2
  -U(1,2)*U(1,1) *DF(XI(2),U(1),2)

  -2*U(1,2)*U(1,1)*DF(XI(2),U(1),X(1))

  -U(1,2)*DF(XI(2),X(1),2)

         3
  -U(1,1) *DF(XI(1),U(1),2)

         2
  +U(1,1) *(DF(ETA(1),U(1),2) -2*DF(XI(1),U(1),X(1)))

  +U(1,1)*(2*DF(ETA(1),U(1),X(1)) -DF(XI(1),X(1),2))

  +DF(ETA(1),X(1),2)

 If by error no values to MM or NN and have been assigned the message

  ***** Number of variables not defined

 is returned. Often the functions ZETA are desired for special
 values of its arguments ETA(ALFA) and XI(K). To this end they have
 to be assigned first to some other variable. After that they may be
 evaluated for the special arguments. In the previous example
 this may be achieved by

  Z11:=ZETA(1,1)$   Z111:=ZETA(1,1,1)$

 Now assign the following values to XI 1, XI 2 and ETA 1:


  XI 1:=4*X(1)**2; XI 2:=4*X(2)*X(1);

  ETA 1:=U(1)*(X(2)**2  - 2*X(1));

 They correspond to the generator GEN 6 of the diffusion equation
 which has been obtained above. Now the desired expressions are
 obtained by calling

  Z11;

                               2
 - (4*U(1,2)*X(2) - U(1,1)*X(2)  + 10*U(1,1)*X(1) + 2*U(1))

  Z111;

                                   2
 - (8*U(1,1,2)*X(2) - U(1,1,1)*X(2)  + 18*U(1,1,1)*X(1) + 12*U(1,1))



 %Appendix (Testfile).

 %This appendix is a test file. The symmetry groups for various
 %equations or systems of equations are determined. The variable
 %PCLASS has the default value 0 and may be changed by the user
 %before running it. The output may be compared with the results
 %which are given in the references.

 %The Burgers equations

 deq 1:=u(1,1)+u 1*u(1,2)+u(1,2,2)$

  cresys deq 1$ simpsys()$ result()$

 %The Kadomtsev-Petviashvili equation

 deq 1:=3*u(1,3,3)+u(1,2,2,2,2)+6*u(1,2,2)*u 1

       +6*u(1,2)**2+4*u(1,1,2)$

  cresys deq 1$ simpsys()$ result()$

 %The modified Kadomtsev-Petviashvili equation

  deq 1:=u(1,1,2)-u(1,2,2,2,2)-3*u(1,3,3)

       +6*u(1,2)**2*u(1,2,2)+6*u(1,3)*u(1,2,2)$

  cresys deq 1$ simpsys()$ result()$

 %The real- and the imaginary part of the nonlinear Schroedinger
 %equation

 deq 1:= u(1,1)+u(2,2,2)+2*u 1**2*u 2+2*u 2**3$

 deq 2:=-u(2,1)+u(1,2,2)+2*u 1*u 2**2+2*u 1**3$

 %Because this is not a single equation the two assignments

  sder 1:=u(2,2,2)$  sder 2:=u(1,2,2)$

 %are necessary.

  cresys()$ simpsys()$ result()$

 %The symmetries of the system comprising the four equations

  deq 1:=u(1,1)+u 1*u(1,2)+u(1,2,2)$

  deq 2:=u(2,1)+u(2,2,2)$

  deq 3:=u 1*u 2-2*u(2,2)$

  deq 4:=4*u(2,1)+u 2*(u 1**2+2*u(1,2))$

  sder 1:=u(1,2,2)$ sder 2:=u(2,2,2)$ sder 3:=u(2,2)$ sder 4:=u(2,1)$

 %is obtained by calling

  cresys()$ simpsys()$

  df(c 5,x 1):=-df(c 5,x 2,2)$

  df(c 5,x 2,x 1):=-df(c 5,x 2,3)$

  simpsys()$  result()$


 %The symmetries of the subsystem comprising equation 1 and 3 are
 %obtained by

  cresys(deq 1,deq 3)$ simpsys()$ result()$

 %The result for all possible subsystems is discussed in detail in
 %''Symmetries and Involution Systems: Some Experiments in Computer
 %Algebra'', contribution to the Proceedings of the Oberwolfach
 %Meeting on Nonlinear Evolution Equations, Summer 1986, to appear.


REDUCE Historical
REDUCE Sourceforge Project | Historical SVN Repository | GitHub Mirror | SourceHut Mirror | NotABug Mirror | Chisel Mirror | Chisel RSS ]