File psl-1983/3-1/doc/nmode/nm-customization.ibm artifact d9919926ac part of check-in 58a25bf8df


,MOD
- R 44X (11 April 1983) <PSL.NMODE-DOC>NM-CUSTOMIZATION.ibm
PLA 97_LAS 80 0_FIR 2_INT 1 6.0_TYP 160 163 162 193_INP 12 101_MAR 2
,END
,PRO
201 OUT 160_202 OUT 163_203 OUT 162_204 OUT 193
205 INP 12 101_206 INP 12 102
,END
,DEFINE
 UNIT SPACE
 FUNCTION
,END

          201/NMODE Manual (Simple Customization)                               Page 22-1


          202/22.  Simple Customization

            201/In this chapter we describe simple ways of customizing NMODE.

            NMODE is designed to be customizable; each user can rearrange things to
          suit his taste.   Simple customizations are primarily of two types: moving
          functions from one character to another, and setting variables which functions
          refer to so as to direct their actions.  Beyond this, extensions can involve
          redefining existing functions, or writing entirely new functions and creating
          sharable libraries of them.

          202/22.1  Init Files

          201/This section explains how to customize NMODE by redefining the effect of
          input keystrokes.  NMODE is customized by executing Lisp forms.   These
          forms may be executed directly within NMODE (using Lisp-E), or may be
          stored in an INIT file, which is read by NMODE when it first starts up.  The
          name of the INIT file read by NMODE is "NMODE.INIT" in the user's home
          directory.

          There are three concepts that must be understood to customize NMODE:
          Commands, Functions, and Modes.

          1) Commands.  The effect of given keystroke or sequence of keystrokes in
          NMODE is based on a mapping between "commands" and "functions".  A
          "command" may be either a single "extended character" or a sequence of
          characters.   An extended  character  is  a  9-bit  character  with  distinct
          "Control" and "Meta" bits.  Thus "C-M-A" is a single "extended character",
          even though on many terminals you have to use two keystrokes to enter it.
          Extended characters are specified using the macro X-CHAR, for example:

            (x-char A)           the letter "A" (upper case)
            (x-char C-F)         Control-F
            (x-char C-M-Z)      Control-Meta-Z
            (x-char CR)         Carriage-Return
            (x-char TAB)                Tab
            (x-char BACKSPACE)        Backspace
            (x-char NEWLINE)    Newline
            (x-char RUBOUT)    Rubout
            (x-char C-M-RUBOUT)       Control-Meta-Rubout

          (The  macros  described  in  this  section are defined in the load module
          EXTENDED-CHAR.)  It is important to note that on most terminals, some Ascii
          control characters are mapped to extended "Control" characters and some
          aren't.  Those that aren't are: Backspace, CR, Newline, Tab, and Escape.
          Even if you type "CTRL-I" on the keyboard, you will get "Tab" and not
          "Control-I".  The remaining Ascii control characters are mapped to extended
          "Control"  characters,  thus  typing  "CTRL-A"  on  the  keyboard  gives
          "Control-A".

          As mentioned above, a command can be a sequence of characters.  There are
          two forms: Prefix commands and Extended commands.
          201/Page 22-2                                          NMODE Manual (Init Files)


          Prefix commands: A prefix command consists of two characters, the first of
          which is a defined "prefix character".  In NMODE, there are 3 predefined
          prefix characters: C-X, ESC, and C-].  Prefix commands are specified using
          the X-CHARS macro, for example:

            (x-chars C-X C-F)
            (x-chars ESC A)
            (x-chars C-] E)

          Extended commands: An extended command consists of the character M-X and
          a string.  Extended commands are defined using the M-X macro, for example:


            (M-X "Lisp Mode")
            (M-X "Revert File")

          The case of the letters in the string is irrelevant, except to specify how the
          command name will be displayed when "completion" is used by the user.  By
          convention, the first letter of each word in an extended command name is
          capitalized.

          2) Functions.  NMODE commands are implemented by PSL functions.   By
          convention, most (but not all) PSL functions that implement NMODE commands
          have     names     ending     with     "-COMMAND",     for     example,
          203/move-forward-character-command201/.

          An NMODE command function should take no arguments.  The function can
          perform its task using a large number of existing support functions; see
          PN:BUFFER.SL  and  PN:MOVE-COMMANDS.SL  for  examples.   A command
          function can determine the command argument (given by C-U) by inspecting
          global variables:

            nmode-command-argument: the numeric value (default: 1)
            nmode-command-argument-given: T if the user specified an argument
            nmode-command-number-given: T if the user typed digits in the argument

          See   the   files   PN:MOVE-COMMANDS.SL,  PN:LISP-COMMANDS.SL,  and
          PN:COMMANDS.SL for many examples of NMODE command functions.

          3) Modes.  The mapping between commands and functions is dependent on the
          current "mode".  Examples of existing modes are "Text Mode", which is the
          basic mode for text editing, "Lisp Mode", which is an extension of "Text
          Mode" for editing and executing Lisp code, and "Dired Mode", which is a
          specialized mode for the Directory Editor Subsystem.

          A mode is defined by a list of Lisp forms which are evaluated to determine
          the state of a Dispatch Table.  The Dispatch Table is what is actually used to
          map from commands to functions.  Every time the user selects a new buffer,
          the Dispatch Table is cleared and the Lisp forms defining the mode for the
          new buffer are evaluated to fill the Dispatch Table.  The forms are evaluated
          in reverse order, so that the first form is evaluated last.   Thus, any
          command  definitions  made  by one form supersede those made by forms
          appearing after it in the list.
          201/NMODE Manual (Init Files)                                          Page 22-3


          Two   functions   are   commonly   invoked   by   mode-defining   forms:
          203/nmode-establish-mode  201/and  203/nmode-define-commands201/.    203/nmode-establish-mode
          201/takes one argument, a list of mode defining forms, and evaluates those forms.
          Thus, 203/nmode-establish-mode 201/can be used to define one mode in terms of (as
          an extension of or a modification to) another mode.

          203/nmode-define-commands 201/takes one argument, a list of pairs, where each pair
          consists of a COMMAND and a FUNCTION.  This form of list is called a
          "command list".  Command lists are not used directly to map from commands
          to functions.  Instead, 203/nmode-define-commands 201/reads the command list it is
          given and for each COMMAND-FUNCTION pair in the command list (in order),
          it  alters  the  Dispatch  Table  to  map  the  specified  COMMAND  to  the
          corresponding FUNCTION.

          Note that as a convenience, whenever you define an "upper case" command,
          the corresponding "lower case" command is also defined to map to the same
          function.  Thus, if you define C-M-A, you automatically define C-M-a to map
          to the same function.  If you want the lower case command to map to a
          different function, you must define the lower case command "after" defining
          the upper case command.

          The usual technique for modifying one or more existing modes is to modify
          one  of  the  command  lists  given  to  203/nmode-define-commands201/.    The  file
          PN:MODE-DEFS.SL contains the definition of most predefined NMODE command
          lists, as well as the definition of most predefined modes.  To modify a mode
          or modes, you must alter one or more command lists by adding (or perhaps
          removing) entries.  Command lists are manipulated using two functions:

            (add-to-command-list list-name command func)
            (remove-from-command-list list-name command)

          Here are some examples:

          (add-to-command-list
           'read-only-text-command-list (x-char M-@) 'set-mark-command)

            [The above form makes M-@ set the mark.]

          (add-to-command-list
           'read-only-terminal-command-list (x-chars ESC Y) 'print-buffer-names-command)

            [The above form makes Esc-Y print a list of all buffer names.  Esc-Y is
             sent by HP264X terminals when the "Display Functions" key is hit.]

          Note that these functions change only the command lists, not the Dispatch
          Table which is actually used to map from commands to functions.  To cause
          the Dispatch Table to be updated to reflect any changes in the command lists,
          you must invoke the function 203/nmode-establish-current-mode201/.
          201/Page 22-4                                          NMODE Manual (Variables)


          202/22.2  Variables

            201/Since the init file consists of a series of PSL forms, it can contain simple
          assignment statements which set up global variables in NMODE.  A variable is
          a name which is associated with a value.   NMODE uses many variables
          internally, and has others whose purpose is to be set by the user for
          customization.  If you want to set a variable a particular way each time you
          use NMODE, you can use your init file to do so.  Global variables may also
          be set automatically by major modes.

            Two examples of global variables are *outwindow and nmode-default-mode.
          Nmode-default-mode is the mode used for most newly created buffers. It is
          normally set to text-mode, but might be set to lisp-interface-mode by a user
          who expects to be editing programs most of the time.  The other variable
          controls the automatic pop up of the output window.  If *outwindow is T, the
          output buffer will automatically appear if it is not already displayed when
          output (i.e. from a lisp calculation) occurs.

          Another example of such a variable is the Fill Column variable, which
          specifies the position of the right margin (in characters from the left margin)
          to be used by the fill and justify commands.

            To set a variable, include in the init file a line containing

          (setq <variable_name> <variable_value>).

          This is just an assignment statement in PSL.  To adjust the fill column to 60,
          for instance, include a line:

          (setq fill-column 60).

          202/22.3  Minor Modes

            201/Since init files can execute arbitrary PSL forms, they can run the same
          functions that one can call from the terminal by appropriate commands.  In
          particular they can turn major or minor modes on or off.

            Minor modes are options which you can use or not.  For example, Auto Fill
          mode is a minor mode in which Spaces break lines between words as you
          type.  All the minor modes are independent of each other and of the selected
          major mode.  Most minor modes say in the mode line when they are on; for
          example, "Fill" in the mode line means that Auto Fill mode is on.

            Minor modes are controlled by a global variable: nmode-minor-modes.  This
          is a list of currently active minor modes.  Rather than directly setting this
          list, it is generally preferable to use some existing functions to turn the
          modes on and off, since they correctly handle some side effects.  Minor modes
          can be added to this list with 203/activate-minor-mode 201/and removed from it with
          203/deactivate-minor-mode201/.    For example, auto fill mode can be turned on when
          NMODE is started by including

          (activate-minor-mode auto-fill-mode)
          201/NMODE Manual (Minor Modes)                                       Page 22-5


          in the init file.

            Each minor mode is associated with a function that can be used to turn it
          on or off.  The function turns the mode on if it was off and off if it was on.
          This is known as 202/toggling201/.  All the minor mode functions are suitable for
          connecting to single or double character commands if you want to enter and
          exit a minor mode frequently.

            Auto Fill mode allows you to type text endlessly without worrying about the
          width of your screen.   Line separators are be inserted where needed to
          prevent lines from becoming too long.  A variable called fill-column sets the
          maximum number of columns allowed in a line.  See Section 13.4 [Filling],
          page 4.

REDUCE Historical
REDUCE Sourceforge Project | Historical SVN Repository | GitHub Mirror | SourceHut Mirror | NotABug Mirror | Chisel Mirror | Chisel RSS ]