File psl-1983/3-1/lpt/13-toploop.lpt artifact 649c266976 part of check-in 3af273af29


PSL Manual                    7 February 1983                User Interface
section 13.0                                                      page 13.1

                                CHAPTER 13
                                CHAPTER 13
                                CHAPTER 13
                              USER INTERFACE
                              USER INTERFACE
                              USER INTERFACE




     13.1. Introduction .  .  .  .  .  .  .  .  .  .  .  .  .  .  .    13.1
     13.2. Stopping PSL and Saving a New Executable Core Image .  .    13.1
     13.3. Init Files.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .    13.3
     13.4. Changing the Default Top Level Function .  .  .  .  .  .    13.3
     13.5. The General Purpose Top Loop Function.  .  .  .  .  .  .    13.4
     13.6. The HELP Mechanism .  .  .  .  .  .  .  .  .  .  .  .  .    13.7
     13.7. The Break Loop  .  .  .  .  .  .  .  .  .  .  .  .  .  .    13.8
     13.8. Terminal Interaction Commands in RLISP  .  .  .  .  .  .    13.8




13.1. Introduction
13.1. Introduction
13.1. Introduction

  In  this  chapter  those functions are presented relating directly to the
user interface; for example, the general purpose  Top  Loop  function,  the
History mechanism, and changing the default Top Level function.



13.2. Stopping PSL and Saving a New Executable Core Image
13.2. Stopping PSL and Saving a New Executable Core Image
13.2. Stopping PSL and Saving a New Executable Core Image

                                                        Quit
                                                        Quit
  The  normal  way to stop PSL execution is to call the Quit function or to
strike <Ctrl-C> on the DEC-20 or <Ctrl-Z> on the VAX.


 Quit
 Quit    _________                                                     ____
(Quit ): Undefined                                                     expr

     Return from LISP to superior process.

  After either of these actions, PSL may be re-entered by typing  START  or
CONTINUE to the EXEC on the DEC-20.  After exiting, the core image may also
be  saved  using  the Tops-20 monitor command "SAVE filename".  On the VAX,
Quit
Quit
Quit causes a stop signal to be sent, so that PSL may be continued from the
shell.  If you  desire  that  the  process  be  killed,  use  the  function
ExitLisp
ExitLisp
ExitLisp.


 ExitLisp
 ExitLisp    _________                                                 ____
(ExitLisp ): Undefined                                                 expr

                                       Quit
                                       Quit
     To  be  used  on  the  VAX.  Like Quit except that the process is
              ExitLisp
              ExitLisp
     killed.  ExitLisp calls the Unix library routine exit().

  A better way to exit and save the core image  is  to  call  the  function
SaveSystem
SaveSystem
SaveSystem.
User Interface                7 February 1983                    PSL Manual
page 13.2                                                      section 13.2

 SaveSystem
 SaveSystem ___ ______ ____ ______ _____ ____ ____   _________         ____
(SaveSystem MSG:string FILE:string FORMS:form-list): Undefined         expr

     This  records the welcome message (after attaching a date) in the
                                              StandardLisp
                                              StandardLisp
     global variable  LISPBANNER!*  used  by  StandardLisp's  call  on
     TopLoop                    DumpLisp
     TopLoop                    DumpLisp
     TopLoop,  and  then  calls DumpLisp to compact the core image and
     write it out as a machine dependent executable file with the name
     ____     ____
     FILE.    FILE  should  have  the  appropriate  extension  for  an
                       SaveSystem
                       SaveSystem
     executable file.  SaveSystem also sets USERMODE!* to T.

                             _____
     The  forms  in the list FORMS will be evaluated when the new core
     image is started.  For example 

        (SaveSystem "PSL 3.1" "PSL.EXE" '((Read-Init-File "PSL")
             (InitializeInterrupts)))

                               SaveSystem
                               SaveSystem
     If RLISP has been loaded, SaveSystem will have been redefined  to
                                                                  Main
                                                                  Main
     save the message in the global variable DATE!*, and redefine Main
               RlispMain                            Begin1
               RlispMain                            Begin1
     to  call  RlispMain,  which  uses  DATE!*  in  Begin1.  The older
     SaveSystem                               LispSaveSystem
     SaveSystem                               LispSaveSystem
     SaveSystem will be saved as the function LispSaveSystem.


 DumpLisp
 DumpLisp ____ ______   _________                                      ____
(DumpLisp FILE:string): Undefined                                      expr

                Reclaim
                Reclaim
     This calls Reclaim to compact the heap,  and  unmaps  the  unused
     pages  (DEC-20)  or  moves  various  segment  pointers  (VAX)  to
     decrease the core image.  The core image is then  written  as  an
                                    ____
     executable file, with the name FILE.


 Reset
 Reset    _________                                                    ____
(Reset ): Undefined                                                    expr

     Return to top level of LISP.  Equivalent to <Ctrl-C> and Start on
     DEC-20.


 Time
 Time    _______                                                       ____
(Time ): integer                                                       expr

     CPU time in milliseconds since login time.


 Date
 Date    ______                                                        ____
(Date ): string                                                        expr

     The date in the form 16-Dec-82.


              __________                                             ______
LISPBANNER!* [Initially: ]                                           global

                                                       SaveSystem
                                                       SaveSystem
     Records  the  welcome  message given by a call to SaveSystem from
                                                         Date
                                                         Date
     PSL.  Also contains the date, given by the function Date.
PSL Manual                    7 February 1983                User Interface
section 13.2                                                      page 13.3

        __________                                                   ______
DATE!* [Initially: Nil]                                              global

                                                       SaveSystem
                                                       SaveSystem
     Records  the  welcome  message given by a call to SaveSystem from
     RLISP.



13.3. Init Files
13.3. Init Files
13.3. Init Files

  Init files are available to make it easier for the user to customize  PSL
to  his/her  own needs.  When PSL, RLISP, or PSLCOMP is executed, if a file
PSL.INIT, RLISP.INIT, or PSLCOMP.INIT (.pslrc, rlisprc,  or  .pslcomprc  on
the  VAX)  is  on  the  home  directory,  it  will  be  read and evaluated.
Currently all init files must be written in LISP  syntax.    They  may  use
FASLIN    LOAD
FASLIN    LOAD
FASLIN or LOAD as needed.

  The  following  functions  are  used  to implement init files, and can be
accessed by LOADing the INIT-FILE module.


 User-HomeDir-String
 User-HomeDir-String    ______                                         ____
(User-HomeDir-String ): string                                         expr

     Returns a full pathname for the user's home directory.


 Init-File-String
 Init-File-String ___________ ______   ______                          ____
(Init-File-String PROGRAMNAME:string): string                          expr

     Returns the full pathname of the user's init file for the program
     ___________
     PROGRAMNAME.

        (Init-File-String  "PSL")


 Read-Init-File
 Read-Init-File ___________ ______   ___                               ____
(Read-Init-File PROGRAMNAME:string): Nil                               expr

                                                          ___________
     Reads  and  evaluates  the  init  file  with  name   PROGRAMNAME.
     Read-Init-File        Init-File-String
     Read-Init-File        Init-File-String               ___________
     Read-Init-File  calls Init-File-String with argument PROGRAMNAME.
     

        (Read-Init-File "PSL")



13.4. Changing the Default Top Level Function
13.4. Changing the Default Top Level Function
13.4. Changing the Default Top Level Function

  As PSL starts up, it first sets  the  stack  pointer  and  various  other
                                        Main          While
                                        Main          While
variables,  and then calls the function Main inside a While loop, protected
     Catch               Main         StandardLisp
     Catch               Main         StandardLisp
by a Catch.  By default, Main calls a StandardLisp top loop, defined  using
              TopLoop
              TopLoop
the  general  TopLoop function, described in the next Section.  In order to
                                                               Main
                                                               Main
have a saved PSL come up in a different top loop, the function Main  should
be appropriately redefined by the user (e.g. as is done to create RLISP).
User Interface                7 February 1983                    PSL Manual
page 13.4                                                      section 13.4

 Main
 Main    _________                                                     ____
(Main ): Undefined                                                     expr

     Initialization  function, called after setting the stack.  Should
                                                    TopLoop
                                                    TopLoop
     be redefined by the user to change the default TopLoop.



13.5. The General Purpose Top Loop Function
13.5. The General Purpose Top Loop Function
13.5. The General Purpose Top Loop Function

  PSL provides a general purpose Top Loop that allows the user  to  specify
         Read  Eval     Print
         Read  Eval     Print
his  own Read, Eval and Print functions and otherwise obtain a standard set
of services, such as Timing, History, Break Loop interface,  and  Interface
to Help system.


               __________                                            ______
TOPLOOPEVAL!* [Initially: NIL]                                       global

         Eval
         Eval
     The Eval used in the current Top Loop.


                __________                                           ______
TOPLOOPPRINT!* [Initially: NIL]                                      global

         Print
         Print
     The Print used in the current Top Loop.


               __________                                            ______
TOPLOOPREAD!* [Initially: NIL]                                       global

         Read
         Read
     The Read used in the current Top Loop.


 TopLoop
 TopLoop ___________   ________  ____________   ________
(TopLoop TOPLOOPREAD!*:function  TOPLOOPPRINT!*:function
___________   ________  ___________   __  _____________ ______   ___   ____
TOPLOOPEVAL!*:function  TOPLOOPNAME!*:id  WELCOMEBANNER:string): NIL   expr

     This  function  is  called to establish a new Top Loop (currently
              Standard  LISP                Break
              Standard  LISP                Break
     used for Standard  LISP,  RLISP,  and  Break).    It  prints  the
                                          Read-Eval-Print
     _____________                        Read-Eval-Print
     WELCOMEBANNER  and  then  invokes a "Read-Eval-Print" loop, using
                                      ___________
     the given functions.  Note that  TOPLOOPREAD!*,  etc.  are  FLUID
     variables,  and  so  may  be  examined  (and  changed) within the
                          TopLoop
                          TopLoop
     executing Top Loop.  TopLoop  provides  a  standard  History  and
                                        ____  ___________
     timing  mechanism,  retaining on a list (HISTORYLIST!*) the input
                     ____    ____
     and output as a list of pairs.   A  prompt  is  constructed  from
     ___________
     TOPLOOPNAME!*  and is printed out, prefixed by the History count.
     As a convention, the name is  followed  by  a  number  of  ">"'s,
     indicating the loop depth.


               __________                                            ______
TOPLOOPNAME!* [Initially: ]                                          global

     Short name to put in prompt.
PSL Manual                    7 February 1983                User Interface
section 13.5                                                      page 13.5

                __________                                           ______
TOPLOOPLEVEL!* [Initially: ]                                         global

     Depth of top loop invocations.


         __________                                                  ______
!*EMSGP [Initially: ]                                                switch

     Whether to print error messages.


          __________                                                 ______
GCTIME!* [Initially: ]                                               global

     Time spent in garbage collection.


             __________                                              ______
INITFORMS!* [Initially: ]                                            global

     Forms to be evaluated at startup.


         __________                                                  ______
!*PECHO [Initially: NIL]                                             switch

                                           StandardLisp
                                           StandardLisp
     Causes  parsed  form read in top-loop StandardLisp to be printed,
     if T.


        __________                                                   ______
!*PVAL [Initially: T]                                                switch

                                        StandardLisp
                                        StandardLisp
     Causes values computed in top-loop StandardLisp to be printed, if
     T.


        __________                                                   ______
!*TIME [Initially: NIL]                                              switch

     If on, causes a step evaluation time to  be  printed  after  each
     command.


 Hist
 Hist  _ _______    ___                                               _____
(Hist [N:integer]): NIL                                               nexpr

     This  function  does not work with the Top Loop used by PSL:RLISP
     or by (beginrlisp); it does work with LISP and with RLISP  if  it
                                                        Hist
                                                        Hist
     is  started  from  LISP using the RLISP function.  Hist is called
     with 0, 1 or 2 integers, which control how much history is to  be
     printed out:


     (HIST)    Display full history.
     (HIST n m)
               Display history from n to m. 
     (HIST n)  Display history from n to present.
     (HIST -n) Display last n entries.
User Interface                7 February 1983                    PSL Manual
page 13.6                                                      section 13.5

  [??? Add more info about what a history is. ???]
  [??? Add more info about what a history is. ???]
  [??? Add more info about what a history is. ???]

  The  following  functions permit the user to access and resubmit previous
expressions, and to re-examine previous results.


 Inp
 Inp _ _______   ___                                                   ____
(Inp N:integer): any                                                   expr

     Return N'th input at this level.


 ReDo
 ReDo _ _______   ___                                                  ____
(ReDo N:integer): any                                                  expr

     Reevaluate N'th input.


 Ans
 Ans _ _______   ___                                                   ____
(Ans N:integer): any                                                   expr

     Return N'th result.


                __________                                           ______
HISTORYCOUNT!* [Initially: 0]                                        global

     Number of entries read so far.


               __________                                            ______
HISTORYLIST!* [Initially: Nil]                                       global

     List of entries read and evaluated.

  TopLoop                                       StandardLisp
  TopLoop                                       StandardLisp
  TopLoop has been used to define the following StandardLisp and RLISP  top
loops.


 StandardLisp
 StandardLisp    ___                                                   ____
(StandardLisp ): NIL                                                   expr

     Interpreter LISP syntax top loop, defined as:

        (De StandardLisp Nil
           (Prog (CurrentReadMacroIndicator!* CurrentScanTable!*)
               (Setq CurrentReadMacroIndicator!* 'LispReadMacro)
               (Setq CurrentScanTable!* LispScanTable!*)
               (Toploop 'Read 'Print 'Eval "LISP"
                                       "PORTABLE STANDARD LISP")))

     Note that the scan tables are modified.


 RLisp
 RLisp    ___                                                          ____
(RLisp ): NIL                                                          expr

     Alternative interpreter RLISP syntax top loop, defined as:  
PSL Manual                    7 February 1983                User Interface
section 13.5                                                      page 13.7

       [??? xread described in RLISP Section ???]
       [??? xread described in RLISP Section ???]
       [??? xread described in RLISP Section ???]

        (De RLisp Nil
        (Toploop 'XRead 'Print 'Eval "RLISP" "PSL RLISP"))

     Note  that  for  the  moment,  the default RLISP loop is not this
     (though this may  be  used  experimentally);  instead  a  similar
                                              BeginRlisp
                                              BeginRlisp
     (special  purpose  hand coded) function, BeginRlisp, based on the
           Begin1
           Begin1
     older Begin1 is used.  It is hoped to change the RLISP  top-level
     to use the general purpose capability.


 BeginRLisp
 BeginRLisp    ____ ________                                           ____
(BeginRLisp ): None Returned                                           expr

     Starts  RLISP  from  PSL:PSL only if RLISP is loaded.  The module
     RLISP is present if you started in RLISP and then entered PSL.



13.6. The HELP Mechanism
13.6. The HELP Mechanism
13.6. The HELP Mechanism

  PSL provides a general purpose Help mechanism,  that  is  called  in  the
TopLoop               Help
TopLoop               Help
TopLoop  by  invoking Help sometimes a ? may be used, as for example in the
break loop.


 Help
 Help  ______ __    ___                                               _____
(Help [TOPICS:id]): NIL                                               fexpr

     If no arguments are given, a message describing Help  itself  and
                                                       __
     known  topics is printed.  Otherwise, each of the id arguments is
     checked to see if any help information is available.  If it has a
     value  under  the  property  list  indicator  HelpFunction,  that
     function  is  called.    If  it  has  a value under the indicator
     HelpString, the value is printed.  If it has a  value  under  the
     indicator  HelpFile,  the  file  is displayed on the terminal. By
     default, a file called "topic.HLP" on the Logical  device,  "PH:"
     is looked for, and printed if found.

     Help
     Help
     Help  also  prints  out  the  values  of  the TopLoop fluids, and
     finally searches the current Id-Hash-Table for loaded modules.


          __________                                                 ______
HELPIN!* [Initially: NIL]                                            global

                                       Help
                                       Help
     The channel used for input by the Help mechanism.


           __________                                                ______
HELPOUT!* [Initially: NIL]                                           global

                                        Help
                                        Help
     The channel used for output by the Help mechanism.
User Interface                7 February 1983                    PSL Manual
page 13.8                                                      section 13.7

13.7. The Break Loop
13.7. The Break Loop
13.7. The Break Loop

  The  Break  Loop  is described in detail in Chapter 14.  For information,
look there.



13.8. Terminal Interaction Commands in RLISP
13.8. Terminal Interaction Commands in RLISP
13.8. Terminal Interaction Commands in RLISP

  Two commands are available in RLISP for use in interactive computing.


 Pause
 Pause    ___                                                          ____
(Pause ): Nil                                                          expr

     The command PAUSE; may be inserted at any point in an input file.
     If this command is encountered on input, the  system  prints  the
                                                               YesP
                                                               YesP
     message CONT? on the user's terminal and halts by calling YesP.


 YesP
 YesP _______ ______   _______                                         ____
(YesP MESSAGE:string): boolean                                         expr

                                    YesP
                                    YesP
     If the user responds Y or Yes, YesP returns T and the calculation
     continues from that point in the file.  If the user responds N or
         YesP
         YesP
     No, YesP returns NIL and control is returned to the terminal, and
     the  user can type in further commands.  However, later on he can
     use the command CONT; and control is then transferred back to the
     point in the file after the last PAUSE was encountered.   If  the
     user  responds  B,  one  enters a break loop.  After quitting the
     break loop, one still must respond Y, N, Yes, or No.


REDUCE Historical
REDUCE Sourceforge Project | Historical SVN Repository | GitHub Mirror | SourceHut Mirror | NotABug Mirror | Chisel Mirror | Chisel RSS ]