Artifact 3cf478df63280768d51203be0a2cabe486908a05da5af12cf45e5bab2bdfd199:


,MOD
- R 44X (11 April 1983) <PSL.NMODE-DOC>NM-COMMANDS.ibm
PLA 97_LAS 80 0_FIR 2_INT 1 6.0_TYP 160 163 162 193_INP 12 101_MAR 2
,END
,PRO
201 OUT 160_202 OUT 163_203 OUT 162_204 OUT 193
205 INP 12 101_206 INP 12 102
,END
,DEFINE
 UNIT SPACE
 FUNCTION
,END

          201/NMODE Manual (Command Descriptions)                              Page 27-1


          202/27.  Command Descriptions

          201/This section defines the basic NMODE commands.  Each command description
          includes the following information:

          203/command   201/A descriptive name of the command.

          203/function    201/The name of the Lisp function that implements the command.

          203/key        201/The logical keys on the keyboard that normally have this command
                      attached to them.  A 203/logical key 201/includes ordinary keys such as
                      Tab or Rubout, 203/shifted 201/keys using the 202/Control 201/and/or 202/Meta
                      201/modifiers (e.g., C-F, M-F, and C-M-F), 203/prefixed commands 201/using
                      C-X, C-], or Escape (e.g., C-X C-F, C-] E, and Esc-L), and
                      203/extended commands 201/using 202/Meta-X 201/(e.g., M-X Delete Matching
                      Lines).

          203/action type 201/One of a number of descriptive terms that categorize the behavior
                      of commands.  Action types are defined in Chapter 24.

          203/mode       201/Some commands are defined only in certain modes.  If present,
                      this attribute specifies the mode or modes in which the command
                      is normally defined.

          203/topic       201/A keyword that describes the command.  Topics are listed in the
                      Topic Index, Chapter 30.
          201/Page 27-2                              NMODE Manual (Command Descriptions)


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Append Next Kill

          201/Function: append-next-kill-command
          Key: C-M-W
          See Global: Kill Ring
          Action Type: Move Data

          Make following kill commands append to last batch.  Thus, C-K C-K, cursor
          motion, this command, and C-K C-K, generate one block of killed stuff,
          containing two lines.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Append To Buffer

          201/Function: append-to-buffer-command
          Key: C-X A
          Topic: Buffers
          See Definition: Region
          Action Type: Move Data

          Append region to specified buffer.   The buffer's name is read from the
          keyboard; the buffer is created if nonexistent.  A numeric argument causes
          us to "prepend" instead.  We always insert the text at that buffer's pointer,
          but when "prepending" we leave the pointer before the inserted text.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Append To File

          201/Function: append-to-file-command
          Key: M-X Append To File
          Topic: Files
          See Definition: Region
          Action Type: Move Data

          Append region to end of specified file.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Apropos

          201/Function: apropos-command
          Key: M-X Apropos
          Key: Esc-_
          Action Type: Inform

          M-X Apropos lists functions with names containing a string for which the user
          is prompted.  The functions are displayed using a documentation browser,
          which allows the user to view additional information on each function or
          further filter the list of displayed functions by matching on addtional strings.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/NMODE Manual (Command Descriptions)                              Page 27-3


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Argument Digit

          201/Function: argument-digit
          Key: C-0
          Key: C-1
          Key: C-2
          Key: C-3
          Key: C-4
          Key: C-5
          Key: C-6
          Key: C-7
          Key: C-8
          Key: C-9
          Key: C-M-0
          Key: C-M-1
          Key: C-M-2
          Key: C-M-3
          Key: C-M-4
          Key: C-M-5
          Key: C-M-6
          Key: C-M-7
          Key: C-M-8
          Key: C-M-9
          Key: M-0
          Key: M-1
          Key: M-2
          Key: M-3
          Key: M-4
          Key: M-5
          Key: M-6
          Key: M-7
          Key: M-8
          Key: M-9
          Action Type: Subsequent Command Modifier

          Specify numeric argument for next command.  Several such digits typed in a
          row all accumulate.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Auto Fill Mode

          201/Function: auto-fill-mode-command
          Key: M-X Auto Fill Mode
          See Command: Set Fill Column
          Action Type: Change Mode

          Break lines between words at the right margin.  A positive argument turns
          Auto Fill mode on; zero or negative, turns it off.  With no argument, the
          mode is toggled.  When Auto Fill mode is on, lines are broken at spaces to fit
          the right margin (position controlled by Fill Column).  You can set the Fill
          Column with the Set Fill Column command.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/Page 27-4                              NMODE Manual (Command Descriptions)


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Back To Indentation

          201/Function: back-to-indentation-command
          Key: C-M-M
          Key: C-M-RETURN
          Key: M-M
          Key: M-RETURN
          Action Type: Move Point

          Move to end of this line's indentation.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Backward Kill Sentence

          201/Function: backward-kill-sentence-command
          Key: C-X RUBOUT
          See Global: Kill Ring
          See Definition: Sentence
          Action Type: Remove

          Kill  back to beginning of sentence.  With a command argument n kills
          backward (n>0) or forward (n>0) by |n| sentences.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Backward Paragraph

          201/Function: backward-paragraph-command
          Key: M-[
          See Definition: Paragraph
          Action Type: Move Point

          Move backward to start of paragraph.  When given argument moves backward
          (n>0) or forward (n<0) by |n| paragraphs where n is the command argument.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Backward Sentence

          201/Function: backward-sentence-command
          Key: M-A
          See Definition: Sentence
          Action Type: Move Point

          Move to beginning of sentence.  When given argument moves backward (n>0)
          or forward (n<0) by |n| sentences where n is the command argument.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/NMODE Manual (Command Descriptions)                              Page 27-5


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Backward Up List

          201/Function: backward-up-list-command
          Key: C-(
          Key: C-M-(
          Key: C-M-U
          Mode: Lisp
          Topic: Lisp
          Action Type: Move Point

          Move up one level of list structure, backward.  Given a command argument n
          move up |n| levels backward (n>0) or forward (n<0).
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Buffer Browser

          201/Function: buffer-browser-command
          Key: C-X C-B
          Key: M-X List Buffers
          Topic: Buffers
          Action Type: Inform

          Put up a buffer browser subsystem. If an argument is given, then include
          buffers whose names begin with "+".
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Buffer Not Modified

          201/Function: buffer-not-modified-command
          Key: M-~
          Topic: Buffers
          Action Type: Set Global Variable

          Pretend that this buffer hasn't been altered.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: C-X Prefix

          201/Function: c-x-prefix
          Key: C-X
          Action Type: Subsequent Command Modifier

          The command Control-X is an escape-prefix for more commands.  It reads a
          character (subcommand) and dispatches on it.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/Page 27-6                              NMODE Manual (Command Descriptions)


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Center Line

          201/Function: center-line-command
          Key: M-S
          Topic: Text
          See Global: Fill Column
          Action Type: Alter Existing Text

          Center this line's text within the line.  With argument, centers that many
          lines and moves past.  Centers current and preceding lines with negative
          argument.  The width is Fill Column.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Copy Region

          201/Function: copy-region
          Key: M-W
          See Global: Kill Ring
          See Definition: Region
          Action Type: Preserve

          Stick region into kill-ring without killing it.  Like killing and getting back,
          but doesn't mark buffer modified.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Count Occurrences

          201/Function: count-occurrences-command
          Key: M-X Count Occurrences
          Key: M-X How Many
          Action Type: Inform

          Counts occurrences of a string, after point.  The user is prompted for the
          string.  Case is ignored in the count.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Delete And Expunge File

          201/Function: delete-and-expunge-file-command
          Key: M-X Delete And Expunge File
          Topic: Files
          Action Type: Remove

          This command prompts the user for the name of the file. NMODE will fill in
          defaults in a partly specified filename (eg filetype can be defaulted).  If
          possible, the file will then be deleted and expunged, and a message to that
          effect will be displayed. If the operation fails, the bell will sound.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/NMODE Manual (Command Descriptions)                              Page 27-7


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Delete Backward Character

          201/Function: delete-backward-character-command
          Key: BACKSPACE
          Key: RUBOUT
          Mode: Text
          Action Type: Remove

          Delete character before point.  With positive arguments this operation is
          performed multiple times on the text before point.  With negative arguments
          this operation is performed multiple times on the text after point.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Delete Backward Hacking Tabs

          201/Function: delete-backward-hacking-tabs-command
          Key: BACKSPACE
          Key: C-RUBOUT
          Key: RUBOUT
          Mode: Lisp
          Action Type: Remove

          Delete character before point, turning tabs into spaces.  Rather than deleting
          a whole tab, the tab is converted into the appropriate number of spaces and
          then  one  space  is  deleted.   With  positive  arguments  this  operation is
          performed multiple times on the text before point.  With negative arguments
          this operation is performed multiple times on the text after point.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Delete Blank Lines

          201/Function: delete-blank-lines-command
          Key: C-X C-O
          Action Type: Remove

          Delete all blank lines around this line's end.  If done on a non-blank line,
          deletes all spaces and tabs at the end of it, and all following blank lines
          (Lines are blank if they contain only spaces and tabs).  If done on a blank
          line, deletes all preceding blank lines as well.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Delete File

          201/Function: delete-file-command
          Key: M-X Delete File
          Key: M-X Kill File
          Topic: Files
          Action Type: Remove

          Delete a file.  Prompts for filename.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/Page 27-8                              NMODE Manual (Command Descriptions)


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Delete Forward Character

          201/Function: delete-forward-character-command
          Key: C-D
          Key: ESC-P
          See Global: Kill Ring
          Action Type: Remove

          Delete  character after point.  With argument, kill that many characters
          (saving them).  Negative args kill characters backward.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Delete Horizontal Space

          201/Function: delete-horizontal-space-command
          Key: M-\
          Action Type: Remove

          Delete all spaces and tabs around point.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Delete Indentation

          201/Function: delete-indentation-command
          Key: M-^
          Action Type: Remove

          Delete CRLF and indentation at front of line.  Leaves one space in place of
          them.  With argument, moves down one line first (deleting CRLF after current
          line).
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Delete Matching Lines

          201/Function: delete-matching-lines-command
          Key: M-X Delete Matching Lines
          Key: M-X Flush Lines
          Action Type: Select
          Action Type: Remove

          Delete Matching Lines: Prompts user for string.  Deletes all lines containing
          specified string.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Delete Non-Matching Lines

          201/Function: delete-non-matching-lines-command
          Key: M-X Delete Non-Matching Lines
          Key: M-X Keep Lines
          Action Type: Select
          Action Type: Remove

          Delete Non-Matching Lines: Prompts user for string.  Deletes all lines not
          containing specified string.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/NMODE Manual (Command Descriptions)                              Page 27-9


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Dired

          201/Function: dired-command
          Key: C-X D

          Run Dired on the directory of the current buffer file.  With no argument,
          edits that directory.  With an argument of 1, shows only the versions of the
          file in the buffer.  With an argument of 4, asks for input, only versions of
          that file are shown.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Down List

          201/Function: down-list-command
          Key: C-M-D
          Mode: Lisp
          Topic: Lisp
          Action Type: Move Point

          Move down one level of list structure, forward.  In other words, move
          forward past the next open bracket, unless there is in an intervening close
          bracket.  With a positive command argument, move forward down that many
          levels.  With a negative command argument, move backward down that many
          levels.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Edit Directory

          201/Function: edit-directory-command
          Key: M-X Dired
          Key: M-X Edit Directory

          DIRED: Edit a directory.  The string argument may contain the filespec (with
          wildcards of course)
                  D deletes the file which is on the current line. (also K,^D,^K)
                  U undeletes the current line file.
                  Rubout undeletes the previous line file.
                  Space is like ^N - moves down a line.
                  E edit the file.
                  S sorts files according to size, read or write date.
                  R does a reverse sort.
                  ? types a list of commands.
                  Q lists files to be deleted and asks for confirmation:
                    Typing YES deletes them; X aborts; N resumes DIRED.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/Page 27-10                             NMODE Manual (Command Descriptions)


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: End Of Defun

          201/Function: end-of-defun-command
          Key: C-M-E
          Key: C-M-]
          Mode: Lisp
          Topic: Lisp
          See Definition: Defun
          Action Type: Move Point

          Move to end of this or next defun.  With argument of 2, finds end of
          following defun.  With argument of -1, finds end of previous defun, etc.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Esc Prefix

          201/Function: esc-prefix
          Key: ESCAPE
          Action Type: Subsequent Command Modifier

          The command esc-prefix is an escape-prefix for more commands.  It reads a
          character (subcommand) and dispatches on it.  Used for escape sequences
          sent by function keys on the keyboard.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Exchange Point And Mark

          201/Function: exchange-point-and-mark
          Key: C-X C-X
          Action Type: Mark
          Action Type: Move Point

          Exchange positions of point and mark.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Exchange Windows

          201/Function: exchange-windows-command
          Key: C-X E
          Action Type: Alter Display Format

          Exchanges the current window with the other window, which becomes current.
          In two window mode, the windows swap physical positions.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Execute Buffer

          201/Function: execute-buffer-command
          Key: M-X Execute Buffer
          Topic: Buffers

          This command makes NMODE take input from the specified buffer as if it were
          typed in.  This command supercedes any such previous request.  Newline
          characters are ignored when reading from a buffer.  If a command argument
          is given then only the last refresh of the screen triggered by the commands
          actually occurs, otherwise all of the updating of the screen is visible.
          201/NMODE Manual (Command Descriptions)                             Page 27-11


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Execute Defun

          201/Function: execute-defun-command
          Key: Lisp-D
          Mode: Lisp
          Topic: Lisp
          See Definition: Defun
          Action Type: Mark

          Causes the Lisp reader to read and evaluate the current defun.  If there is
          no current defin, the Lisp reader will read a form starting at the current
          location.  We arrange for output to go to the end of the output buffer.  The
          mark is set at the current location in the input buffer, in case user wants to
          go back.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Execute File

          201/Function: execute-file-command
          Key: M-X Execute File
          Topic: Files

          This command makes NMODE take input from the specified file as if it were
          typed in.  This command supercedes any such previous request.  Newline
          characters are ignored when reading from a buffer.  If a command argument
          is given then only the last refresh of the screen triggered by the commands
          actually occurs, otherwise all of the updating of the screen is visible.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Execute Form

          201/Function: execute-form-command
          Key: Lisp-E
          Mode: Lisp
          Topic: Lisp
          Action Type: Mark

          Causes the Lisp reader to read and evaluate a form starting at the beginning
          of the current line.  We arrange for output to go to the end of the output
          buffer.  The mark is set at the current location in the input buffer, in case
          user wants to go back.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Exit Nmode

          201/Function: exit-nmode
          Key: Lisp-L
          Mode: Lisp
          Topic: Lisp
          Action Type: Escape

          Leave NMODE, return to normal listen loop.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/Page 27-12                             NMODE Manual (Command Descriptions)


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Fill Comment

          201/Function: fill-comment-command
          Key: M-Z
          See Global: Fill Prefix
          See Global: Fill Column
          See Definition: Paragraph
          Action Type: Alter Existing Text

          This command creates a temporary fill prefix from the start of the current
          line.  It replaces the surrounding paragraph (determined using fill-prefix)
          with a filled version.  It leaves point at the a position bearing the same
          relation to the filled text that the old point did to the old text.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Fill Paragraph

          201/Function: fill-paragraph-command
          Key: M-Q
          Topic: Text
          See Global: Fill Prefix
          See Global: Fill Column
          See Definition: Paragraph
          Action Type: Alter Existing Text

          This fills (or justifies) this (or next) paragraph.  It leaves point at the a
          position bearing the same relation to the filled text that the old point did to
          the old text.  A numeric argument triggers justification rather than filling.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Fill Region

          201/Function: fill-region-command
          Key: M-G
          Topic: Text
          See Command: Set Fill Column
          See Command: Set Fill Prefix
          See Global: Fill Prefix
          See Global: Fill Column
          See Definition: Paragraph
          See Definition: Sentence
          Action Type: Alter Existing Text

          Fill text from point to mark.  Fill Column specifies the desired text width.
          Fill Prefix if present is a string that goes at the front of each line and is not
          included in the filling.  See Set Fill Column and Set Fill Prefix.  An explicit
          argument causes justification instead of filling.  Each sentence which ends
          within a line is followed by two spaces.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/NMODE Manual (Command Descriptions)                             Page 27-13


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Find File

          201/Function: find-file-command
          Key: C-X C-F
          Key: M-X Find File
          Topic: Files
          Topic: Buffers
          Action Type: Move Data
          Action Type: Move Point

          Visit a file in its own buffer.  If the file is already in some buffer, select
          that buffer.  Otherwise, visit the file in a buffer named after the file.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Forward Paragraph

          201/Function: forward-paragraph-command
          Key: M-]
          Topic: Text
          See Definition: Paragraph
          Action Type: Move Point

          Move forward to end of this or the next paragraph.  When given argument
          moves forward (n>0) or backward (n<0) by |n| paragraphs where n is the
          command argument.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Forward Sentence

          201/Function: forward-sentence-command
          Key: M-E
          Topic: Text
          See Definition: Sentence
          Action Type: Move Point

          Move forward to end of this or the next sentence.  When given argument
          moves forward (n>0) or backward (n<0) by |n| sentences.  where n is the
          command argument.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Forward Up List

          201/Function: forward-up-list-command
          Key: C-)
          Key: C-M-)
          Mode: Lisp
          Topic: Lisp
          Action Type: Move Point

          Move up one level of list structure, forward.  Given a command argument n
          move up |n| levels forward (n>0) or backward (n<0).
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/Page 27-14                             NMODE Manual (Command Descriptions)


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Get Register

          201/Function: get-register-command
          Key: C-X G
          Action Type: Move Data
          Action Type: Mark

          Get contents of register (reads name from keyboard).  The name is a single
          letter or digit.  Usually leaves the pointer before, and the mark after, the
          text.  With argument, puts point after and mark before.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Grow Window

          201/Function: grow-window-command
          Key: C-X ^
          Action Type: Alter Display Format

          Make this window use more lines.  Argument is number of extra lines (can be
          negative).
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Help Dispatch

          201/Function: help-dispatch
          Key: C-?
          Key: M-/
          Key: M-?
          Action Type: Inform

          Prints the documentation of a command (not a function).  The command
          character is read from the terminal.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Incremental Search

          201/Function: incremental-search-command
          Key: C-S
          Action Type: Move Point
          Action Type: Select

          Search for character string as you type it.  C-Q quotes special characters.
          Rubout cancels last character.  C-S repeats the search, forward, and C-R
          repeats it backward.  C-R or C-S with search string empty changes the
          direction of search or brings back search string from previous search.
          Altmode exits the search.  Other Control and Meta chars exit the search and
          then are executed.  If not all the input string can be found, the rest is not
          discarded.  You can rub it out, discard it all with C-G, exit, or use C-R or
          C-S to search the other way.  Quitting a successful search aborts the search
          and moves point back; quitting a failing search just discards whatever input
          wasn't found.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/NMODE Manual (Command Descriptions)                             Page 27-15


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Indent New line

          201/Function: indent-new-line-command
          Key: NEWLINE
          Action Type: Insert Constant

          This function performs the following actions: Executes whatever function, if
          any, is associated with <CR>.  Executes whatever function, if  any,  is
          associated with TAB, as if no command argument was given.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Indent Region

          201/Function: indent-region-command
          Key: C-M-\
          Mode: Text

          Indent all lines between point and mark.  With argument, indents each line to
          exactly that column.  A line is processed if its first character is in the
          region.  It tries to preserve the textual context of point and mark.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Insert Buffer

          201/Function: insert-buffer-command
          Key: M-X Insert Buffer
          Topic: Buffers
          Action Type: Move Data

          Insert contents of another buffer into existing text.  The user is prompted
          for the buffer name.  Point is left just before the inserted material, and mark
          is left just after it.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Insert Closing bracket

          201/Function: insert-closing-bracket
          Key: )
          Key: ]
          Mode: Lisp
          Topic: Lisp
          Action Type: Insert Constant

          Insert the character typed, which should be a closing bracket, then display
          the matching opening bracket.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/Page 27-16                             NMODE Manual (Command Descriptions)


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Insert Comment

          201/Function: insert-comment-command
          Key: M-;
          Mode: Lisp
          Topic: Lisp
          Action Type: Insert Constant

          Move to the end of the current line, then add a "%" and a space at its end.
          Leave point after the space.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Insert Date

          201/Function: insert-date-command
          Key: M-X Insert Date
          Action Type: Move Data

          Insert the current time and date after point.  The mark is put after the
          inserted text.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Insert File

          201/Function: insert-file-command
          Key: M-X Insert File
          Topic: Files
          Action Type: Move Data

          Insert contents of file into existing text.  File name is string argument.  The
          pointer is left at the beginning, and the mark at the end.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Insert Kill Buffer

          201/Function: insert-kill-buffer
          Key: C-Y
          See Global: Kill Ring
          Action Type: Move Data
          Action Type: Mark

          Re-insert the last stuff killed.  Puts point after it and the mark before it.
          An argument n says un-kill the n'th most recent string of killed stuff (1 =
          most recent).  A null argument (just C-U) means leave point before, mark
          after.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/NMODE Manual (Command Descriptions)                             Page 27-17


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Insert Next Character

          201/Function: insert-next-character-command
          Key: C-Q
          Action Type: Move Data

          Reads a character and inserts it.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Kill Backward Form

          201/Function: kill-backward-form-command
          Key: C-M-RUBOUT
          Mode: Lisp
          Topic: Lisp
          See Global: Kill Ring
          Action Type: Remove

          Kill the last form.  With a command argument kill the last (n>0) or next (n<0)
          |n| forms, where n is the command argument.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Kill Backward Word

          201/Function: kill-backward-word-command
          Key: M-RUBOUT
          Topic: Text
          See Global: Kill Ring
          Action Type: Remove

          Kill last word.  With a command argument kill the last (n>0) or next (n<0)
          |n| words, where n is the command argument.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Kill Buffer

          201/Function: kill-buffer-command
          Key: C-X K
          Key: M-X Kill Buffer
          Topic: Buffers
          Action Type: Remove

          Kill the buffer with specified name.  The buffer name is taken from the
          keyboard.  Name completion is performed by SPACE and RETURN.  If the
          buffer has changes in it, the user is asked for confirmation.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/Page 27-18                             NMODE Manual (Command Descriptions)


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Kill Forward Form

          201/Function: kill-forward-form-command
          Key: C-M-K
          Mode: Lisp
          Topic: Lisp
          See Global: Kill Ring
          Action Type: Remove

          Kill the next form.  With a command argument kill the next (n>0) or last
          (n<0) |n| forms, where n is the command argument.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Kill Forward Word

          201/Function: kill-forward-word-command
          Key: M-D
          Topic: Text
          See Global: Kill Ring
          Action Type: Remove

          Kill the next word.  With a command argument kill the next (n>0) or last
          (n<0) |n| words, where n is the command argument.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Kill Line

          201/Function: kill-line
          Key: C-K
          Key: ESC-M
          See Global: Kill Ring
          Action Type: Remove

          Kill to end of line, or kill an end of line.  At the end of a line (only blanks
          following) kill through the CRLF.  Otherwise, kill the rest of the line but not
          the CRLF.  With argument (positive or negative), kill specified number of
          lines forward or backward respectively.  An argument of zero means kill to
          the beginning of the ine, nothing if at the beginning.  Killed text is pushed
          onto the kill ring for retrieval.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Kill Region

          201/Function: kill-region
          Key: C-W
          See Global: Kill Ring
          See Definition: Region
          Action Type: Remove

          Kill from point to mark.  Use Control-Y and Meta-Y to get it back.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/NMODE Manual (Command Descriptions)                             Page 27-19


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Kill Sentence

          201/Function: kill-sentence-command
          Key: M-K
          Topic: Text
          See Global: Kill Ring
          See Definition: Sentence
          Action Type: Remove

          Kill forward to end of sentence.  With minus one as an argument it kills back
          to the beginning of the sentence.  Positive or negative arguments mean to kill
          that many sentences forward or backward respectively.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Kill Some Buffers

          201/Function: kill-some-buffers-command
          Key: M-X Kill Some Buffers
          Topic: Buffers
          Action Type: Remove

          Kill Some Buffers: Offer to kill each buffer, one by one.  If the buffer
          contains a modified file and you say to kill it, you are asked for confirmation.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Lisp Abort

          201/Function: lisp-abort-command
          Key: Lisp-A
          Mode: Lisp
          Topic: Lisp
          Action Type: Escape

          This command will pop out of an arbitrarily deep break loop.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Lisp Backtrace

          201/Function: lisp-backtrace-command
          Key: Lisp-B
          Mode: Lisp
          Topic: Lisp
          Action Type: Inform

          This lists all the function calls on the stack. It is a good way to see how the
          offending expression got generated.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/Page 27-20                             NMODE Manual (Command Descriptions)


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Lisp Continue

          201/Function: lisp-continue-command
          Key: Lisp-C
          Mode: Lisp
          Topic: Lisp
          Action Type: Escape

          This causes the expression last printed to be returned as the value of the
          offending expression.  This allows a user to recover from a low level error in
          an involved calculation if they know what should have been returned by the
          offending expression.  This is also often useful as an automatic stub: If an
          expression containing an undefined function is evaluated, a Break loop is
          entered, and this may be used to return the value of the function call.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Lisp Help

          201/Function: lisp-help-command
          Key: Lisp-?
          Mode: Lisp
          Topic: Lisp
          Action Type: Inform

          If in break print:
              "Lisp break commands: Q-quit;A-abort;R-retry;C-continue;B-backtrace"
          else print:
              "Lisp  commands:  E-execute  form;Y-yank  last  output;L-invoke  Lisp
          Listener"
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Lisp Indent Region

          201/Function: lisp-indent-region-command
          Key: C-M-\
          Mode: Lisp
          Topic: Lisp

          Indent all lines between point and mark.  With argument, indents each line to
          exactly that column.  Otherwise, lisp indents each line.  A line is processed
          if its first character is in the region.  It tries to preserve the textual
          context of point and mark.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Lisp Indent sexpr

          201/Function: lisp-indent-sexpr
          Key: C-M-Q
          Mode: Lisp
          Topic: Lisp

          Lisp Indent each line contained in the next form.  This command does NOT
          respond to command arguments.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/NMODE Manual (Command Descriptions)                             Page 27-21


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Lisp Mode

          201/Function: lisp-mode-command
          Key: M-X Lisp Mode
          Topic: Lisp
          Action Type: Change Mode

          Set things up for editing Lisp code.  Tab indents for Lisp.  Rubout hacks
          tabs.  Lisp execution commands availible.  Paragraphs are delimited only by
          blank lines.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Lisp Prefix

          201/Function: lisp-prefix
          Key: C-]
          Mode: Lisp
          Topic: Lisp
          Action Type: Subsequent Command Modifier

          The command lisp-prefix is an escape-prefix for more commands.  It reads a
          character (subcommand) and dispatches on it.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Lisp Quit

          201/Function: lisp-quit-command
          Key: Lisp-Q
          Mode: Lisp
          Topic: Lisp
          Action Type: Escape

          This exits the current break loop. It only pops up one level, unlike abort.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Lisp Retry

          201/Function: lisp-retry-command
          Key: Lisp-R
          Mode: Lisp
          Topic: Lisp
          Action Type: Escape

          This tries to evaluate the offending expression again, and to continue the
          computation.   This is often useful after defining a missing function, or
          assigning a value to a variable.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/Page 27-22                             NMODE Manual (Command Descriptions)


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Lisp Tab

          201/Function: lisp-tab-command
          Key: C-M-I
          Key: C-M-TAB
          Key: TAB
          Mode: Lisp
          Topic: Lisp
          See Command: Tab To Tab Stop
          Action Type: Alter Existing Text

           Indent this line for a Lisp-like language.  With arg, moves over and indents
          that many lines.  With negative argument, indents preceding lines.
           Note that the binding of TAB to this function holds only in Lisp mode.  In
          text mode TAB is bound to the Tab To Tab Stop command and the other keys
          bound to this function are undefined.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Lowercase Region

          201/Function: lowercase-region-command
          Key: C-X C-L
          See Definition: Region
          Action Type: Alter Existing Text

          Convert region to lower case.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Lowercase Word

          201/Function: lowercase-word-command
          Key: M-L
          Topic: Text
          Action Type: Alter Existing Text

          Convert one word to lower case, moving past it.  With arg, applies to that
          many words backward or forward.  If backward, the cursor does not move.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: M-X Prefix

          201/Function: m-x-prefix
          Key: C-M-X
          Key: M-X
          Action Type: Subsequent Command Modifier

          Read an extended command from the terminal with completion.  Completion is
          performed by SPACE and RETURN.  This command reads the name of an
          extended  command,  with  completion,  then  executes that command.  The
          command may itself prompt for input.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/NMODE Manual (Command Descriptions)                             Page 27-23


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Make Parens

          201/Function: make-parens-command
          Key: M-(
          Mode: Lisp
          Topic: Lisp
          Action Type: Insert Constant

          Insert () putting point after the (.  Also make a space before the (, if
          appropriate.  With argument, put the ) after the specified number of already
          existing forms.   Thus, with argument 1, puts extra parens around the
          following form.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Mark Beginning

          201/Function: mark-beginning-command
          Key: C-<
          Action Type: Mark

          Set mark at beginning of buffer.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Mark Defun

          201/Function: mark-defun-command
          Key: C-M-BACKSPACE
          Key: C-M-H
          Key: M-BACKSPACE
          Mode: Lisp
          Topic: Lisp
          See Definition: Defun
          Action Type: Mark

          Put point and mark around this defun (or next).
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Mark End

          201/Function: mark-end-command
          Key: C->
          Action Type: Mark

          Set mark at end of buffer.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/Page 27-24                             NMODE Manual (Command Descriptions)


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Mark Form

          201/Function: mark-form-command
          Key: C-M-@
          Mode: Lisp
          Topic: Lisp
          Action Type: Mark

          Set mark after (n>0) or before (n<0) |n| forms from point where n is the
          command argument.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Mark Paragraph

          201/Function: mark-paragraph-command
          Key: M-H
          Topic: Text
          See Definition: Paragraph
          Action Type: Mark
          Action Type: Move Point

          Put point and mark around this paragraph.  In between paragraphs, puts it
          around the next one.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Mark Whole Buffer

          201/Function: mark-whole-buffer-command
          Key: C-X H
          Action Type: Mark
          Action Type: Move Point

          Set point at beginning and mark at end of buffer.  Pushes the old point on
          the mark first, so two pops restore it.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Mark Word

          201/Function: mark-word-command
          Key: M-@
          Topic: Text
          Action Type: Mark

          Set mark after (n>0) or before (n<0) |n| words from point where n is the
          command argument.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/NMODE Manual (Command Descriptions)                             Page 27-25


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Move Backward Character

          201/Function: move-backward-character-command
          Key: C-B
          Key: ESC-D
          Action Type: Move Point

          Move  back  one  character.   With  argument,  move  that  many characters
          backward.  Negative arguments move forward.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Move Backward Defun

          201/Function: move-backward-defun-command
          Key: C-M-A
          Key: C-M-[
          Mode: Lisp
          Topic: Lisp
          See Definition: Defun
          Action Type: Move Point

          Move to beginning of this or previous defun.  With a negative argument,
          moves forward to the beginning of a defun.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Move Backward Form

          201/Function: move-backward-form-command
          Key: C-M-B
          Mode: Lisp
          Topic: Lisp
          Action Type: Move Point

          Move back one form.  With argument, move that many forms backward.
          Negative arguments move forward.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Move Backward List

          201/Function: move-backward-list-command
          Key: C-M-P
          Mode: Lisp
          Topic: Lisp
          Action Type: Move Point

          Move back  one  list.   With  argument,  move  that  many  lists  backward.
          Negative arguments move forward.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/Page 27-26                             NMODE Manual (Command Descriptions)


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Move Backward Word

          201/Function: move-backward-word-command
          Key: ESC-4
          Key: M-B
          Topic: Text
          Action Type: Move Point

          Move back one word.  With argument, move that many words backward.
          Negative arguments move forward.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Move Down

          201/Function: move-down-command
          Key: ESC-B
          See Global: Goal Column
          Action Type: Move Point

          Move point down a line.  If a command argument n is given, move point down
          (n>0) or up (n<0) by |n| lines.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Move Down Extending

          201/Function: move-down-extending-command
          Key: C-N
          See Global: Goal Column
          Action Type: Move Point

          Move down vertically to next line.  If given an argument moves down (n>0)
          or up (n<0) |n| lines where n is the command argument.  If given without an
          argument after the last LF in the buffer, makes a new one at the end.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Move Forward Character

          201/Function: move-forward-character-command
          Key: C-F
          Key: ESC-C
          Action Type: Move Point

          Move forward one character.  With argument, move that many characters
          forward.  Negative args move backward.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/NMODE Manual (Command Descriptions)                             Page 27-27


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Move Forward Form

          201/Function: move-forward-form-command
          Key: C-M-F
          Mode: Lisp
          Topic: Lisp
          Action Type: Move Point

          Move forward one form.  With argument, move that many forms forward.
          Negative args move backward.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Move Forward List

          201/Function: move-forward-list-command
          Key: C-M-N
          Mode: Lisp
          Topic: Lisp
          Action Type: Move Point

          Move forward one list.  With argument, move that many  lists  forward.
          Negative args move backward.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Move Forward Word

          201/Function: move-forward-word-command
          Key: ESC-5
          Key: M-F
          Topic: Text
          Action Type: Move Point

          Move forward one word.  With argument, move that many words forward.
          Negative args move backward.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Move Over Paren

          201/Function: move-over-paren-command
          Key: M-)
          Mode: Lisp
          Topic: Lisp
          Action Type: Move Point

          Move forward past the next closing bracket.  If a positive command argument
          is  given,  move  forward  past  that  many  closing  brackets.   Delete  all
          indentation before the first closing bracket passed.  After the last closing
          bracket passed, insert an end-of-line and then indent the new line according
          to Lisp.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/Page 27-28                             NMODE Manual (Command Descriptions)


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Move To Buffer End

          201/Function: move-to-buffer-end-command
          Key: ESC-F
          Key: M->
          Action Type: Move Point

          Go to end of buffer (leaving mark behind).
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Move To Buffer Start

          201/Function: move-to-buffer-start-command
          Key: ESC-H
          Key: M-<
          Action Type: Move Point

          Go to beginning of buffer (leaving mark behind).
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Move To End Of Line

          201/Function: move-to-end-of-line-command
          Key: C-E
          Action Type: Move Point

          Move point to end of line.  With positive argument n goes down n-1 lines,
          then to the end of line.  With zero argument goes up a line, then to line
          end.  With negative argument n goes up |n|+1 lines, then to the end of line.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Move To Screen Edge

          201/Function: move-to-screen-edge-command
          Key: M-R
          Action Type: Move Point

          Jump to top or bottom of screen.  Like Control-L except that point is
          changed instead of the window.  With no argument, jumps to the center.  An
          argument specifies the number of lines from the top, (negative args count
          from the bottom).
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Move To Start Of Line

          201/Function: move-to-start-of-line-command
          Key: C-A
          Action Type: Move Point

          Move point to beginning of line.  With positive argument n goes down n-1
          lines, then to the beginning of line.  With zero argument goes up a line, then
          to line beginning.  With negative argument n goes up |n|+1 lines, then to the
          beginning of line.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/NMODE Manual (Command Descriptions)                             Page 27-29


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Move Up

          201/Function: move-up-command
          Key: C-P
          Key: ESC-A
          See Global: Goal Column
          Action Type: Move Point

          Move up vertically to next line.  If given an argument moves up (n>0) or
          down (n<0) |n| lines where n is the command argument.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Negative Argument

          201/Function: negative-argument
          Key: C--
          Key: C-M--
          Key: M--
          Action Type: Subsequent Command Modifier

          Make argument to next command negative.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Next Screen

          201/Function: next-screen-command
          Key: C-V
          Action Type: Move Point

          Move down to display next screenful of text.  With argument, moves window
          down <arg> lines (negative moves up).  Just minus as an argument moves up
          a full screen.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Nmode Abort

          201/Function: nmode-abort-command
          Key: C-G
          Action Type: Escape

          This command provides a way of aborting input requests.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Nmode Exit To Superior

          201/Function: nmode-exit-to-superior
          Key: C-X C-Z
          Action Type: Escape

          Go back to EMACS's superior job.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/Page 27-30                             NMODE Manual (Command Descriptions)


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Nmode Full Refresh

          201/Function: nmode-full-refresh
          Key: ESC-J
          Action Type: Alter Display Format

          This function refreshes the screen after first clearing the display.  It it used
          when the state of the display is in doubt.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Nmode Gc

          201/Function: nmode-gc
          Key: M-X Make Space

          Reclaims any internal wasted space.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Nmode Invert Video

          201/Function: nmode-invert-video
          Key: C-X V
          Action Type: Alter Display Format

          Toggle between normal and inverse video.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Nmode Refresh

          201/Function: nmode-refresh-command
          Key: C-L
          Action Type: Alter Display Format

          Choose new window putting point at  center,  top  or  bottom.   With  no
          argument, chooses a window to put point at the center.  An argument gives
          the line to put point on;  negative args count from the bottom.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: One Window

          201/Function: one-window-command
          Key: C-X 1
          Action Type: Alter Display Format

          Display only one window.  Normally, we display what used to be in the top
          window, but a numeric argument says to display what was in the bottom one.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/NMODE Manual (Command Descriptions)                             Page 27-31


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Open Line

          201/Function: open-line-command
          Key: C-O
          Key: ESC-L
          Action Type: Insert Constant

          Insert a CRLF after point.  Differs from ordinary insertion in that point
          remains before the inserted characters.  With positive argument, inserts
          several CRLFs.  With negative argument does nothing.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Other Window

          201/Function: other-window-command
          Key: C-X O
          Action Type: Alter Display Format
          Action Type: Move Point

          Switch to the other window.  In two-window mode, moves cursor to other
          window.  In one-window mode, exchanges contents of visible window with
          remembered contents of (invisible) window two.  An argument means switch
          windows but select the same buffer in the other window.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Prepend To File

          201/Function: prepend-to-file-command
          Key: M-X Prepend To File
          Topic: Files
          See Definition: Region
          Action Type: Move Data

          Append region to start of specified file.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Previous Screen

          201/Function: previous-screen-command
          Key: M-V
          Action Type: Move Point

          Move up to display previous screenful of text.  When an argument is present,
          move the window back (n>0) or forward (n<0) |n| lines, where n is the
          command argument.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/Page 27-32                             NMODE Manual (Command Descriptions)


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Put Register

          201/Function: put-register-command
          Key: C-X X
          Action Type: Preserve

          Put point to mark into register (reads name from keyboard).  With an
          argument, the text is also deleted.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Query Replace

          201/Function: query-replace-command
          Key: M-%
          Key: M-X Query Replace
          Action Type: Alter Existing Text
          Action Type: Select

          Replace occurrences of a string from point to the end of the buffer, asking
          about each occurrence.  Query Replace prompts for the string to be replaced
          and for its potential replacement.  Query Replace displays each occurrence of
          the string to be replaced, you then type a character to say what to do.
          Space => replace it with the potential replacement and show the next copy.
          Rubout or Backspace => don't replace, but show next copy.  Comma =>
          replace this copy and show result, waiting for next command.  ^ => return to
          site of previous copy.  C-L => redisplay screen.  Exclamation mark => replace
          all remaining copys without asking.  Period => replace this copy and exit.
          Escape => just exit.  Anything else exits and is reread.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Rename Buffer

          201/Function: rename-buffer-command
          Key: M-X Rename Buffer
          Topic: Buffers
          Action Type: Set Global Variable

          Change the name of the current buffer.  The new name is read from the
          keyboard.  If the user provides an empty string, the buffer name will be set
          to a truncated version of the filename associated with the buffer.  The buffer
          name is automatically converted to upper case.  An error is reported if the
          user provides the name of another existing buffer.  The buffers MAIN and
          OUTPUT may not be renamed.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/NMODE Manual (Command Descriptions)                             Page 27-33


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Replace String

          201/Function: replace-string-command
          Key: C-%
          Key: M-X Replace String
          Action Type: Alter Existing Text
          Action Type: Select

          Replace string with another from point to buffer end.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Reposition Window

          201/Function: reposition-window-command
          Key: C-M-R
          Mode: Lisp
          Topic: Lisp
          Action Type: Alter Display Format

          Reposition screen window appropriately.  Tries to get all of current defun on
          screen.  Never moves the pointer.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Return

          201/Function: return-command
          Key: RETURN
          Action Type: Insert Constant

          Insert CRLF, or move onto empty line.  Repeated by positive argument.  No
          action with negative argument.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Reverse Search

          201/Function: reverse-search-command
          Key: C-R
          See Command: Incremental Search
          Action Type: Move Point
          Action Type: Select

          Incremental Search Backwards.  Like Control-S but in reverse.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Revert File

          201/Function: revert-file-command
          Key: M-X Revert File
          Topic: Files
          Action Type: Remove

          Undo changes to a file.  Reads back the file being edited from disk
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/Page 27-34                             NMODE Manual (Command Descriptions)


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Save All Files

          201/Function: save-all-files-command
          Key: M-X Save All Files
          Topic: Buffers
          Topic: Files
          Action Type: Preserve

          Offer to write back each buffer which may need it.  For each buffer which is
          visiting a file and which has been modified, you are asked whether to save
          it.  A numeric arg means don't ask;  save everything.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Save File

          201/Function: save-file-command
          Key: C-X C-S
          Topic: Files
          Action Type: Preserve

          Save visited file on disk if modified.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Scroll Other Window

          201/Function: scroll-other-window-command
          Key: C-M-V
          Action Type: Alter Display Format

          Scroll other window up several lines.  Specify the number as a numeric
          argument, negative for down.  The default is a whole screenful up.  Just
          Meta-Minus as argument means scroll a whole screenful down.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Scroll Window Down Line

          201/Function: scroll-window-down-line-command
          Key: ESC-T
          Action Type: Alter Display Format

          Scroll the contents of the window down (n > 0) or up (n < 0) by |n| lines
          where n is the command argument.  The "window position" may be adjusted to
          keep it within the window.  Ding if the window contents does not move.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Scroll Window Down Page

          201/Function: scroll-window-down-page-command
          Key: ESC-V
          Action Type: Alter Display Format

          Scroll the contents of the window down (n > 0) or up (n < 0) by |n|
          screenfuls where n is the command argument.  The "window position" may be
          adjusted to keep it within the window.  Ding if the window contents does not
          move.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/NMODE Manual (Command Descriptions)                             Page 27-35


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Scroll Window Left

          201/Function: scroll-window-left-command
          Key: C-X <
          Action Type: Alter Display Format

          Scroll the contents of the specified window right (n > 0) or left (n < 0) by
          |n| columns where n is the command argument.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Scroll Window Right

          201/Function: scroll-window-right-command
          Key: C-X >
          Action Type: Alter Display Format

          Scroll the contents of the specified window left (n > 0) or right (n < 0) by
          |n| columns where n is the command argument.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Scroll Window Up Line

          201/Function: scroll-window-up-line-command
          Key: ESC-S
          Action Type: Alter Display Format

          Scroll the contents of the window up (n > 0) or down (n < 0) by |n| lines
          where n is the command argument.  The "window position" may be adjusted to
          keep it within the window.  Ding if the window contents does not move.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Scroll Window Up Page

          201/Function: scroll-window-up-page-command
          Key: ESC-U
          Action Type: Alter Display Format

          Scroll the contents of the window up (n > 0) or down (n < 0) by |n|
          screenfuls where n is the command argument.  The "window position" may be
          adjusted to keep it within the window.  Ding if the window contents does not
          move.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Select Buffer

          201/Function: select-buffer-command
          Key: C-X B
          Key: M-X Select Buffer
          Topic: Buffers
          Action Type: Move Point

          Select or create buffer with specified name.  Buffer name is read from
          keyboard.  Name completion is performed by SPACE and RETURN.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/Page 27-36                             NMODE Manual (Command Descriptions)


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Select Previous Buffer

          201/Function: select-previous-buffer-command
          Key: C-M-L
          Topic: Buffers
          Action Type: Move Point

          Select  the  previous  buffer  of  the  current buffer, if it exists and is
          selectable.  Otherwise, select the MAIN buffer.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Set Fill Column

          201/Function: set-fill-column-command
          Key: C-X F
          See Global: Fill Column
          Action Type: Set Global Variable

          Set fill column to numeric arg or current column.  If there is an argument,
          that is used.  Otherwise, the current position of the cursor is used.  The
          Fill Column variable controls where Auto Fill mode and the fill commands put
          the right margin.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Set Fill Prefix

          201/Function: set-fill-prefix-command
          Key: C-X .
          See Global: Fill Prefix
          Action Type: Set Global Variable

          Defines Fill Prefix from current line.  All of the current line up to point
          becomes the value of Fill Prefix.  Auto Fill Mode inserts the prefix on each
          line;  the Fill Paragraph command assumes that each non-blank line starts
          with the prefix (which is ignored for filling purposes).  To stop using a Fill
          Prefix, do Control-X .  at the front of a line.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Set Goal Column

          201/Function: set-goal-column-command
          Key: C-X C-N
          Action Type: Set Global Variable

          Set (or flush) a permanent goal for vertical motion.  With no argument, makes
          the current column the goal for vertical motion commands.  They will always
          try to go to that column.  With argument, clears out any previously set goal.
          Only Control-P and Control-N are affected.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/NMODE Manual (Command Descriptions)                             Page 27-37


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Set Key

          201/Function: set-key-command
          Key: M-X Set Key
          Action Type: Set Global Variable

          Put a function on a key.  The function name is a string argument.  The key
          is always read from the terminal (not a string argument).  It may contain
          metizers and other prefix characters.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Set Mark

          201/Function: set-mark-command
          Key: C-@
          Key: C-SPACE
          Action Type: Mark

          Sets or pops the mark.  With no ^U's, pushes point as the mark.  With one
          ^U, pops the mark into point.  With two ^U's, pops the mark and throws it
          away.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Set Visited Filename

          201/Function: set-visited-filename-command
          Key: M-X Set Visited Filename
          Topic: Files
          Action Type: Set Global Variable

          Change visited filename, without writing or reading any file.  The user is
          prompted for a filename.  What NMODE believes to be the name of the visited
          file associated with the current buffer is set from the user's input.  No file's
          name is actually changed.  If possible, the new name will be adjusted to
          reflect an actual file name, as if the specified file were visited.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Split Line

          201/Function: split-line-command
          Key: C-M-O
          Action Type: Insert Constant

          Move rest of this line vertically down.  Inserts a CRLF, and then enough
          tabs/spaces so that what had been the rest of the current line is indented as
          much as it had been.  Point does not move, except to skip over indentation
          that originally followed it. With positive argument, makes extra blank lines in
          between.  No action with negative argument.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/Page 27-38                             NMODE Manual (Command Descriptions)


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Start Scripting

          201/Function: start-scripting-command
          Key: M-X Start Scripting
          Action Type: Change Mode

          This function prompts the user for a buffer name, into which it will copy all
          the   user's   commands   (as   well   as   executing   them)   until   the
          stop-scripting-command  is  invoked.   This  command supercedes any such
          previous request.  Note that to keep the lines of reasonable length, free
          Newlines will be inserted from time to time.  Because of this, and because
          many file systems cannot represent stray Newlines, the Newline character is
          itself scripted as a CR followed by a TAB, since this is its normal definition.
          Someday, perhaps, this hack will be replaced by a better one.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Start Timing

          201/Function: start-timing-command
          Key: M-X Start Timing Nmode
          Action Type: Change Mode

          This cleans up a number of global variables associated with timing, prompts
          for a file in which to put the timing data (or defaults to a file named
          "timing", of type "txt"), and starts the timing. Information is collected on
          the total time, refresh time, read time, command execution time, total number
          of cons cells built, and total number of garbage collections performed.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Stop Scripting

          201/Function: stop-scripting-command
          Key: M-X Stop Scripting
          Action Type: Change Mode

          This command stops the echoing of user commands into a script buffer.  This
          command is itself echoed before the creation of the script stops.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Stop Timing

          201/Function: stop-timing-command
          Key: M-X Stop Timing Nmode
          Action Type: Change Mode

          This stops the timing, formats the output data, and closes the file into which
          the timing information is going.  Information is collected on the total time,
          refresh time, read time, command execution time, total number of cons cells
          built, and total number of garbage collections performed.  In addition to
          these numbers, some ratios are printed.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/NMODE Manual (Command Descriptions)                             Page 27-39


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Tab To Tab Stop

          201/Function: tab-to-tab-stop-command
          Key: M-I
          Key: M-TAB
          Key: TAB
          See Command: Lisp Tab
          Action Type: Insert Constant

          Insert a tab character.  Note that the binding of TAB to this command only
          holds in text mode, not in lisp mode, where it is bound to the Lisp Tab
          command. In lisp mode, the other keys continue to be bound to this command.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Text Mode

          201/Function: text-mode-command
          Key: M-X Text Mode
          Topic: Text
          Action Type: Change Mode

          Set things up for editing English text.  Tab inserts tab characters.  There
          are no comments.  Auto Fill does not indent new lines.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Transpose Characters

          201/Function: transpose-characters-command
          Key: C-T
          See Command: Transpose Words
          Action Type: Alter Existing Text

          Transpose the characters before and after the cursor.  For more details, see
          Meta-T, reading "character" for "word".  However: at the end of a line, with
          no argument, the preceding two characters are transposed.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Transpose Forms

          201/Function: transpose-forms
          Key: C-M-T
          Mode: Lisp
          Topic: Lisp
          See Command: Transpose Words
          Action Type: Alter Existing Text

          Transpose the forms before and after the cursor.  For more details, see
          Meta-T, reading "Form" for "Word".
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/Page 27-40                             NMODE Manual (Command Descriptions)


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Transpose Lines

          201/Function: transpose-lines
          Key: C-X C-T
          See Command: Transpose Words
          Action Type: Alter Existing Text

          Transpose the lines before and after the cursor.  For more details, see
          Meta-T, reading "Line" for "Word".
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Transpose Regions

          201/Function: transpose-regions
          Key: C-X T
          See Definition: Region
          Action Type: Alter Existing Text

          Transpose regions defined by cursor and last 3 marks.  To transpose two
          non-overlapping regions, set the mark successively at three of the four
          boundaries, put point at the fourth, and call this function.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Transpose Words

          201/Function: transpose-words
          Key: M-T
          Topic: Text
          Action Type: Alter Existing Text

          Transpose the words before and after the cursor.  With a positive argument
          it transposes the words before and after the cursor, moves right, and
          repeats the specified number of times, dragging the word to the left of the
          cursor right.  With a negative argument, it transposes the two words to the
          left of the cursor, moves between them, and repeats the specified number of
          times, exactly undoing the positive argument form.  With a zero argument, it
          transposes the words at point and mark.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Two Windows

          201/Function: two-windows-command
          Key: C-X 2
          Action Type: Alter Display Format

          Show two windows and select window two.  An argument > 1 means give
          window 2 the same buffer as in Window 1.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/NMODE Manual (Command Descriptions)                             Page 27-41


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Undelete File

          201/Function: undelete-file-command
          Key: M-X Undelete File
          Topic: Files
          Action Type: Move Data
          Action Type: Preserve

          This command prompts the user for the name of the file. NMODE will fill in a
          partly specified filename (eg filetype can be defaulted).  If possible, the file
          will then be undeleted, and a message to that effect will be displayed. If the
          operation fails, the bell will sound.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Universal Argument

          201/Function: universal-argument
          Key: C-U
          Action Type: Subsequent Command Modifier

          Sets argument or multiplies it by four.  Followed by digits, uses them to
          specify the argument for the command after the digits.  If not followed by
          digits, multiplies the argument by four.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Unkill Previous

          201/Function: unkill-previous
          Key: M-Y
          See Global: Kill Ring
          See Definition: Region
          Action Type: Alter Existing Text

          Delete (without saving away) the current region, and then unkill (yank) the
          specified entry in the kill ring.   "Ding" if the current region does not
          contain the same text as the current entry in the kill ring.  If one has just
          retrieved the top entry from the kill ring this has the effect of displaying the
          item just beneath it, then the item beneath that and so on until the original
          top entry rotates back into view.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Upcase Digit

          201/Function: upcase-digit-command
          Key: M-'
          Action Type: Alter Existing Text

          Convert last digit to shifted character.  Looks on current line back from
          point, and previous line.  The first time you use this command, it asks you
          to type the row of digits from 1 to 9 and then 0, holding down Shift, to
          determine how your keyboard is set up.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/Page 27-42                             NMODE Manual (Command Descriptions)


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Uppercase Initial

          201/Function: uppercase-initial-command
          Key: M-C
          Topic: Text
          Action Type: Alter Existing Text

          Put next word in lower case, but capitalize initial.  With arg, applies to that
          many words backward or forward.  If backward, the cursor does not move.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Uppercase Region

          201/Function: uppercase-region-command
          Key: C-X C-U
          See Definition: Region
          Action Type: Alter Existing Text

          Convert region to upper case.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Uppercase Word

          201/Function: uppercase-word-command
          Key: M-U
          Topic: Text
          Action Type: Alter Existing Text

          Convert one word to upper case, moving past it.  With arg, applies to that
          many words backward or forward.  If backward, the cursor does not move.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: View Two Windows

          201/Function: view-two-windows-command
          Key: C-X 3
          Action Type: Alter Display Format

          Show two windows but stay in first.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Visit File

          201/Function: visit-file-command
          Key: C-X C-V
          Key: M-X Visit File
          Topic: Files
          Action Type: Move Data
          Action Type: Move Point

          Visit new file in current buffer.  The user is prompted for the filename.  If
          the current buffer is modified, the user is asked whether to write it out.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/NMODE Manual (Command Descriptions)                             Page 27-43


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Visit In Other Window

          201/Function: visit-in-other-window-command
          Key: C-X 4
          Topic: Files
          Topic: Buffers
          Action Type: Move Point
          Action Type: Alter Display Format

          Find buffer or file in other window.  Follow this command by B and a buffer
          name, or by F and a file name.  We find the buffer or file in the other
          window, creating the other window if necessary.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: What Cursor Position

          201/Function: what-cursor-position-command
          Key: C-=
          Key: C-X =
          Action Type: Inform

          Print various things about where cursor is.  Print the X position, the Y
          position, the octal code for the following character, point absolutely and as a
          percentage of the total file size, and the virtual boundaries, if any.  If a
          positive argument is given point will jump to the line number specified by the
          argument.  A negative argument triggers a jump to the first line in the
          buffer.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Write File

          201/Function: write-file-command
          Key: C-X C-W
          Key: M-X Write File
          Topic: Files
          Action Type: Preserve

          Prompts for file name.  Stores the current buffer in specified file.  This file
          becomes the one being visited.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Write Region

          201/Function: write-region-command
          Key: M-X Write Region
          Topic: Files
          See Definition: Region
          Action Type: Preserve

          Write region to file.  Prompts for file name.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          201/Page 27-44                             NMODE Manual (Command Descriptions)


          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Write Screen

          201/Function: write-screen-command
          Key: C-X P
          Topic: Files
          Action Type: Preserve

          Ask for filename, write out the screen to the file.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
          202/Command: Yank Last Output

          201/Function: yank-last-output-command
          Key: Lisp-Y
          Mode: Lisp
          Topic: Lisp
          Action Type: Move Data

          Insert "last output" typed in the OUTPUT buffer.
          204/$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

REDUCE Historical
REDUCE Sourceforge Project | Historical SVN Repository | GitHub Mirror | SourceHut Mirror | NotABug Mirror | Chisel Mirror | Chisel RSS ]