DELETED mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/CT2_desc.tex
Index: mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/CT2_desc.tex
==================================================================
--- mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/CT2_desc.tex
+++ /dev/null
@@ -1,41 +0,0 @@
-% Verbal description for system CT2 (CT2_desc.tex)
-% Generated by MTT on Thu Dec 4 16:00:14 GMT 1997.
-
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% %% Version control history
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% %% $Id$
-% %% $Log$
-% %% Revision 1.1  1997/12/07 20:29:56  peterg
-% %% Initial revision
-% %%
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-   The acausal bond graph of system \textbf{CT2} is
-   displayed in Figure \Ref{CT2_abg} and its label
-   file is listed in Section \Ref{sec:CT2_lbl}.
-   The subsystems are listed in Section \Ref{sec:CT2_sub}.
-
-\textbf{CT2} is a two port thermal capacitor representing an ideal
-heat engine converting heat to work without energy loss. There are two
-ports {\bf [in]} (with covariables Temperature (absolute) and
-entropy flow) and {\bf [out]} with covariables Pressure and rate of
-change of volume. 
-
-Rather than using the corresponding (nonlinear) Constitutive
-Relationship (with entropy and volume as states) directly, the
-component is built up from a {\em linear\/} two-port capacitor with
-internal energy and volume as states. The {\bf ES} component provides
-the conversion from the pseudo Bond Graph with temperature (relative)
-and enthalpy flow as covariables to the true Bond Graph with with
-covariables Temperature (absolute) and entropy flow.
-
-The power-sensor {\bf PS} component is used to subtract the work enrgy
-from the internal energy.
-
-
-
-
-
-
-

DELETED mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_abg.fig
Index: mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_abg.fig
==================================================================
--- mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_abg.fig
+++ /dev/null
@@ -1,41 +0,0 @@
-#FIG 3.2
-Portrait
-Center
-Metric
-A4      
-100.00
-Single
--2
-1200 2
-2 1 0 2 -1 7 0 0 -1 0.000 0 0 -1 0 0 3
-	 2026 3151 3601 3151 3376 3376
-2 1 0 2 -1 7 0 0 -1 0.000 0 0 -1 0 0 3
-	 5176 3151 6751 3151 6526 3376
-2 1 0 2 -1 7 0 0 -1 0.000 0 0 -1 0 0 2
-	 6751 2926 6751 3376
-2 1 0 2 -1 7 0 0 -1 0.000 0 0 -1 0 0 2
-	 2026 2926 2026 3376
-2 1 0 2 -1 7 0 0 -1 0.000 0 0 -1 0 0 2
-	 7425 2925 7425 3375
-2 1 0 2 -1 7 0 0 -1 0.000 0 0 -1 0 0 3
-	 7426 3150 9001 3150 8776 3375
-2 1 0 2 -1 7 0 0 -1 0.000 0 0 -1 0 0 3
-	 6975 2924 6975 1349 7200 1574
-2 1 0 2 -1 7 0 0 -1 0.000 0 0 -1 0 0 3
-	 5176 1125 6751 1125 6526 1350
-2 4 0 2 31 7 1 0 -1 0.000 0 0 7 0 0 5
-	 10350 4950 675 4950 675 450 10350 450 10350 4950
-4 1 4 0 0 0 20 0.0000 4 240 795 3601 2926 [Heat]\001
-4 1 -1 0 0 0 20 0.0000 4 285 1440 4411 3241 Cycle:cycle\001
-4 1 4 0 0 0 20 0.0000 4 255 900 5176 2926 [Work]\001
-4 2 -1 0 0 0 20 0.0000 4 210 945 1936 3241 Sf:Heat\001
-4 1 1 1 0 3 20 0.0000 4 210 735 2655 3465 dS/dT\001
-4 1 1 1 0 3 20 0.0000 4 195 180 2700 2925 T\001
-4 1 1 1 0 3 20 0.0000 4 195 180 6120 2925 P\001
-4 1 1 1 0 3 20 0.0000 4 210 765 5985 3465 dV/dT\001
-4 0 -1 0 0 0 20 0.0000 4 210 1080 9091 3241 Se:Work\001
-4 1 1 1 0 3 30 0.0000 4 405 2160 5535 4500 Diesel cycle\001
-4 1 -1 0 0 0 20 0.0000 4 195 150 7066 3241 1\001
-4 0 -1 0 0 0 20 0.0000 4 195 825 6930 1215 FMR:r\001
-4 1 4 0 0 0 20 0.0000 4 255 750 6705 945 [mod]\001
-4 2 -1 0 0 0 20 0.0000 4 210 1170 5085 1215 Sf:Switch\001

DELETED mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_desc.tex
Index: mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_desc.tex
==================================================================
--- mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_desc.tex
+++ /dev/null
@@ -1,73 +0,0 @@
-% Verbal description for system DieselCycle (DieselCycle_desc.tex)
-% Generated by MTT on Thu Dec 4 15:59:55 GMT 1997.
-
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% %% Version control history
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% %% $Id$
-% %% $Log$
-% Revision 1.1  1997/12/09  12:30:26  peterg
-% Initial revision
-%
-% Revision 1.1  1997/12/08  09:37:04  peterg
-% Initial revision
-%
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-   The acausal bond graph of system \textbf{DieselCycle} is
-   displayed in Figure \Ref{DieselCycle_abg} and its label
-   file is listed in Section \Ref{sec:DieselCycle_lbl}.
-   The subsystems are listed in Section \Ref{sec:DieselCycle_sub}.
-
-
-The Diesel cycle is a simple closed thermodynamic cycle with four parts:
-\begin{enumerate}
-\item Isentropic compression
-\item Heating at constant pressure
-\item Isentropic expansion
-\item Cooling at constant volume
-\end{enumerate}
-
-The subsystem \textbf{Cycle} (Section \Ref{sec:Cycle}) is a two-port
-component describing an ideal gas. It has two energy ports which, with
-integral causality correspond to
-\begin{enumerate}
-\item Entropy flow in; temperature out
-\item Volume rate of change in; pressure out
-\end{enumerate}
-
-In contast to the Otto cycle (see Table
-\Ref{tab:cycles} where each table entry gives the causality on the
-heat and work ports respectively). The ideal Diesel cycle has
-derivative causality on the {\bf [Work]} port for one part of the
-cycle.
-
-To avoid this causality change, the Diesel cycle is approximated by
-applying the volume change from a pressure source via a resistance
-{\bf R} component. During the {\em heat injection\/} part of the
-cycle, the resistance parameter $r\approx 0$, but during the other parts of
-the cycle, the resistance parameter $r\approx \inf$.
-
-The simulation parameters appear in Section
-\Ref{sec:DieselCycle_numpar.txt}. The results are plotted against time
-as follows:
-\begin{itemize}
-\item Volume (Figure \Ref{fig:DieselCycle_odeso.ps-DieselCycle-cycle-V})
-\item Pressure (Figure
-\Ref{fig:DieselCycle_odeso.ps-DieselCycle-cycle-P})
-\item Entropy (Figure \Ref{fig:DieselCycle_odeso.ps-DieselCycle-cycle-S})
-\item Temperature (Figure
-\Ref{fig:DieselCycle_odeso.ps-DieselCycle-cycle-T})
-\end{itemize}
-
-These values are replotted as the standard PV and TS diagrams in
-Figures
-\Ref{fig:DieselCycle_odeso.ps-DieselCycle-cycle-V:DieselCycle-cycle-P}
-and
-\Ref{fig:DieselCycle_odeso.ps-DieselCycle-cycle-S:DieselCycle-cycle-T}
-respectively.
-
-
-
-
-

DELETED mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_input.txt
Index: mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_input.txt
==================================================================
--- mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_input.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-# Numerical parameter file (DieselCycle_input.txt)
-# Generated by MTT at Thu Dec  4 11:17:09 GMT 1997
-
-# %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-# %% Version control history
-# %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-# %% $Id$
-# %% $Log$
-# %% Revision 1.1  2000/12/28 18:15:21  peterg
-# %% To RCS
-# %%
-# %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-
-# Set the inputs
-if ((t>=0.0)&&(t<1.0))		#Compression
-  dieselcycle__Heat__u = 0.0;	# Entropy flow
-  dieselcycle__switch__u = 1/big; # Large R to make a flow source 
-  dieselcycle__Work__u = 0.8/big;	#- Volume rate-of-change
-endif;
-
-if ((t>=1.0)&&(t<2.0))		#Heating
-  TopPressure = (gamma_g-1)*(x(1)/x(2))
-  dieselcycle__Heat__u = 1000;	# Entropy flow
-  dieselcycle__switch__u = big; # small r constant pressure
-  dieselcycle__Work__u = TopPressure; # Pressure source
-  Volume = x(4);
-endif;
-
-if ((t>=2.0)&&(t<3.0))		#Expansion
-  dieselcycle__Heat__u = 0.0;	# Entropy flow
-  dieselcycle__switch__u = 1/big; # Large R to make a flow source 
-  dieselcycle__Work__u = -(1-Volume)*big; # Volume rate-of-change
-endif;
-
-if (t>=3.0)			#Cooling
-  Pressure = (gamma_g-1)*x(1)/x(2);
-  dieselcycle__Heat__u = -1000*(Pressure>1e5);	# Entropy flow
-  dieselcycle__switch__u = 1/big; # Large R to make a flow source 
-  dieselcycle__Work__u = 0.0;	# Zero volume rate-of-change
-endif;

DELETED mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_lbl.txt
Index: mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_lbl.txt
==================================================================
--- mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_lbl.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-#SUMMARY DieselCycle:a simple closed thermodynamic cycle
-#DESCRIPTION The Diesel cycle is a simple closed thermodynamic cycle
-#DESCRIPTION with four parts:
-#DESCRIPTION o Isentropic compression
-#DESCRIPTION o Heating at constant pressure
-#DESCRIPTION o Isentropic expansion
-#DESCRIPTION o Cooling at constant volume
-  
-#PAR P_0
-#PAR T_0
-#PAR V_0
-#PAR S_0
-#PAR U_0
-#PAR big
-
-### NB TopPressure should be computed within input.txt !!!
-#PAR TopPressure
-#PAR Volume
-#PAR Pressure
-
-#NOTPAR ideal_gas
-
-## Label file for system DieselCycle (DieselCycle_lbl.txt)
-
-# ###############################################################
-# ## Version control history
-# ###############################################################
-# ## $Id$
-# ## $Log$
-# ## Revision 1.2  2000/12/28 18:15:21  peterg
-# ## To RCS
-# ##
-# ## Revision 1.1  1998/07/21 15:25:50  peterg
-# ## Initial revision
-# ##
-# ###############################################################
-
-## Each line should be of one of the following forms:
-#	a comment (ie starting with #)
-#	Component-name	CR_name	arg1,arg2,..argn
-#	blank
-
-
-
-# Component type Cycle
-	cycle	none	ideal_gas;c_v;gamma_g;m_g	
-
-# Component type R
-	r		lin	flow,1
-
-# Component type Sf
-	Heat	SS	external
-
-# Component type Se
-	Work	SS	external
-
-# Component type Sf
-	Switch	SS	external

DELETED mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_numpar.txt
Index: mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_numpar.txt
==================================================================
--- mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_numpar.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-# Numerical parameter file (DieselCycle_numpar.txt)
-# Generated by MTT at Thu Dec  4 11:44:46 GMT 1997
-
-# %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-# %% Version control history
-# %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-# %% $Id$
-# %% $Log$
-# %% Revision 1.1  2000/12/28 18:15:21  peterg
-# %% To RCS
-# %%
-# %% Revision 1.1  1998/03/04 11:45:49  peterg
-# %% Initial revision
-# %%
-# %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-big = 1e5;			# Large number
-
-# Initial states -- needed to choose an approppriate mass
-P_0 = 1e5;
-V_0 = 1;
-T_0 = 300;
-
-# Parameters
-c_v = 	718.0;			# Parameter c_v for CU
-gamma_g = 1.4;			# Parameter gamma_g for CU
-m_g = 	P_0*V_0/(T_0*(gamma_g-1)*c_v);# Parameter m for CU
-
-## Removed by MTT on Wed Aug  6 17:32:59 BST 2003: pressure	= 1.0; # Added by MTT on Wed Aug 06 17:31:21 BST 2003
-s_0	= 1.0; # Added by MTT on Wed Aug 06 17:31:21 BST 2003
-## Removed by MTT on Wed Aug  6 17:32:59 BST 2003: ## Removed by MTT on Wed Aug  6 17:32:59 BST 2003: toppressure	= 1.0; # Added by MTT on Wed Aug 06 17:31:21 BST 2003
-u_0	= 1.0; # Added by MTT on Wed Aug 06 17:31:21 BST 2003
-## Removed by MTT on Wed Aug  6 17:32:59 BST 2003: volume	= 1.0; # Added by MTT on Wed Aug 06 17:31:21 BST 2003
-pressure	= 1.0; # Added by MTT on Wed Aug 06 17:36:47 BST 2003
-toppressure	= 1.0; # Added by MTT on Wed Aug 06 17:36:47 BST 2003
-volume	= 1.0; # Added by MTT on Wed Aug 06 17:36:47 BST 2003

DELETED mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_rep.txt
Index: mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_rep.txt
==================================================================
--- mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_rep.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-# Outline report file for system DieselCycle (DieselCycle_rep.txt)
-
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% %% Version control history
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% %% $Id$
-% %% $Log$
-% %% Revision 1.2  1999/12/21 23:57:08  peterg
-% %% Compiled version
-% %%
-% %% Revision 1.1  1999/02/21 02:15:29  peterg
-% %% Initial revision
-% %%
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-mtt -o -ss DieselCycle abg tex
-mtt -o -ss DieselCycle struc tex
-mtt -o -ss DieselCycle ode tex
-mtt -o -ss DieselCycle ss tex
-
-mtt -o -ss DieselCycle numpar txt
-mtt -o -ss DieselCycle input txt
-
-mtt -o -ss DieselCycle odeso ps 'DieselCycle__cycle__V'
-mtt -o -ss DieselCycle odeso ps 'DieselCycle__cycle__P'
-mtt -o -ss DieselCycle odeso ps 'DieselCycle__cycle__S'
-mtt -o -ss DieselCycle odeso ps 'DieselCycle__cycle__T'
-mtt -o -ss DieselCycle odeso ps 'DieselCycle__cycle__V:DieselCycle__cycle__P'
-mtt -o -ss DieselCycle odeso ps 'DieselCycle__cycle__S:DieselCycle__cycle__T'
-
-
-
-

DELETED mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_simpar.txt
Index: mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_simpar.txt
==================================================================
--- mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_simpar.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-%% Simulation parameters for system DieselCycle (DieselCycle_simpar.txt)
-
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% %% Version control history
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% %% $Id$
-% %% $Log$
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-LAST=4.0
-DT=0.01
-STEPFACTOR=10

DELETED mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_sspar.r
Index: mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_sspar.r
==================================================================
--- mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/DieselCycle_sspar.r
+++ /dev/null
@@ -1,42 +0,0 @@
-% Steady-state parameter file (DieselCycle_sspar.r)
-% Generated by MTT at Wed Mar  4 11:02:40 GMT 1998
-
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% % Version control history
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% % $Id$
-% % $Log$
-% % Revision 1.1  2000/12/28 18:15:21  peterg
-% % To RCS
-% %
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-
-% Set a pressure of 1 bar
-%P_0 := 10^5;
-
-% Unit initial volume
-%V_0 := 1;
-
-% Internal energy
-U_0 := P_0*V_0/(gamma_g-1);
-
-% Set initial temperature of 300k
-%T_0 := 300;
-
-% Deduce the mass of gas
-m_g :=  U_0/(T_0*c_v);
-
-% Entropy
-S_0 := U_0/T_0;
-
-% Steady-state states
-MTTX1 := 	U_0;         % DieselCycle_cycle_gas (c)
-MTTX2 := 	V_0;         % DieselCycle_cycle_gas (c)
-MTTX3 := 	S_0;         % DieselCycle_cycle_entropy (3)
-MTTX4 := 	V_0;         % DieselCycle_cycle_volume (3)
-
-% Steady-state inputs
-MTTU1 := 	0; % DieselCycle (Heat)
-MTTU2 := 	0; % DieselCycle (Work)
-;;END;

DELETED mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/TestCU_abg.fig
Index: mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/TestCU_abg.fig
==================================================================
--- mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/TestCU_abg.fig
+++ /dev/null
@@ -1,16 +0,0 @@
-#FIG 3.1
-Portrait
-Center
-Metric
-1200 2
-2 1 0 2 -1 7 0 0 -1 0.000 0 0 -1 0 0 3
-	 1125 2925 2475 2925 2250 3150
-2 1 0 2 -1 7 0 0 -1 0.000 0 0 -1 0 0 3
-	 3150 2925 4500 2925 4275 3150
-2 1 0 2 -1 7 0 0 -1 0.000 0 0 -1 0 0 2
-	 1125 2700 1125 3150
-2 1 0 2 -1 7 0 0 -1 0.000 0 0 -1 0 0 2
-	 4500 2700 4500 3150
-4 1 -1 0 0 0 20 0.0000 4 195 600 2790 3015 CU:c\001
-4 2 -1 0 0 0 20 0.0000 4 195 960 1035 3015 SS:Heat\001
-4 0 -1 0 0 0 20 0.0000 4 195 1050 4635 3015 SS:Work\001

DELETED mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/TestCU_cr.r
Index: mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/TestCU_cr.r
==================================================================
--- mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/TestCU_cr.r
+++ /dev/null
@@ -1,6 +0,0 @@
-% Constitutive relation file for TestCU (TestCU_cr.r)
-% Generated by MTT at Sat Jun 27 12:13:42 BST 1998
-
-in "CU_cr.r";
-in "lin.cr";
-END;

DELETED mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/TestCU_lbl.txt
Index: mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/TestCU_lbl.txt
==================================================================
--- mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/TestCU_lbl.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-%SUMMARY TestCU
-%DESCRIPTION <Detailed description here>
-%% Label file for system TestCU (TestCU_lbl.txt)
-
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% %% Version control history
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% %% $Id$
-% %% $Log$
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-%% Each line should be of one of the following forms:
-%	a comment (ie starting with %)
-%	Component-name	CR_name	arg1,arg2,..argn
-%	blank
-
-
-
-% Component type CU
-	c		CU		ideal_gas,c_v,gamma,m
-
-% Component type SS
-	Heat		external	external
-	Work		external	external

DELETED mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/TestCU_simp.r
Index: mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/TestCU_simp.r
==================================================================
--- mttroot/mtt/lib/examples/Thermal/ThermodynamicCycles/DieselCycle/TestCU_simp.r
+++ /dev/null
@@ -1,12 +0,0 @@
-%% Reduce commands to simplify output for system TestCU (TestCU_simp.r)
-
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% %% Version control history
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% %% $Id$
-% %% $Log$
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-On Factor;
-Off Div;
-END;