DELETED CVSROOT/checkoutlist Index: CVSROOT/checkoutlist ================================================================== --- CVSROOT/checkoutlist +++ CVSROOT/checkoutlist @@ -1,14 +0,0 @@ -# The "checkoutlist" file is used to support additional version controlled -# administrative files in $CVSROOT/CVSROOT, such as template files. -# -# The first entry on a line is a filename which will be checked out from -# the corresponding RCS file in the $CVSROOT/CVSROOT directory. -# The remainder of the line is an error message to use if the file cannot -# be checked out. -# -# File format: -# -# []

-# -# comment lines begin with '#' -syncmail DELETED CVSROOT/commitinfo Index: CVSROOT/commitinfo ================================================================== --- CVSROOT/commitinfo +++ CVSROOT/commitinfo @@ -1,15 +0,0 @@ -# The "commitinfo" file is used to control pre-commit checks. -# The filter on the right is invoked with the repository and a list -# of files to check. A non-zero exit of the filter program will -# cause the commit to be aborted. -# -# The first entry on a line is a regular expression which is tested -# against the directory that the change is being committed to, relative -# to the $CVSROOT. For the first match that is found, then the remainder -# of the line is the name of the filter to run. -# -# If the repository name does not match any of the regular expressions in this -# file, the "DEFAULT" line is used, if it is specified. -# -# If the name "ALL" appears as a regular expression it is always used -# in addition to the first matching regex or "DEFAULT". DELETED CVSROOT/config Index: CVSROOT/config ================================================================== --- CVSROOT/config +++ CVSROOT/config @@ -1,11 +0,0 @@ -# Set this to "no" if pserver shouldn't check system users/passwords -#SystemAuth=no - -# Set `PreservePermissions' to `yes' to save file status information -# in the repository. -#PreservePermissions=no - -# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top -# level of the new working directory when using the `cvs checkout' -# command. -#TopLevelAdmin=no DELETED CVSROOT/cvswrappers Index: CVSROOT/cvswrappers ================================================================== --- CVSROOT/cvswrappers +++ CVSROOT/cvswrappers @@ -1,23 +0,0 @@ -# This file affects handling of files based on their names. -# -# The -t/-f options allow one to treat directories of files -# as a single file, or to transform a file in other ways on -# its way in and out of CVS. -# -# The -m option specifies whether CVS attempts to merge files. -# -# The -k option specifies keyword expansion (e.g. -kb for binary). -# -# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers) -# -# wildcard [option value][option value]... -# -# where option is one of -# -f from cvs filter value: path to filter -# -t to cvs filter value: path to filter -# -m update methodology value: MERGE or COPY -# -k expansion mode value: b, o, kkv, &c -# -# and value is a single-quote delimited value. -# For example: -#*.gif -k 'b' DELETED CVSROOT/editinfo Index: CVSROOT/editinfo ================================================================== --- CVSROOT/editinfo +++ CVSROOT/editinfo @@ -1,21 +0,0 @@ -# The "editinfo" file is used to allow verification of logging -# information. It works best when a template (as specified in the -# rcsinfo file) is provided for the logging procedure. Given a -# template with locations for, a bug-id number, a list of people who -# reviewed the code before it can be checked in, and an external -# process to catalog the differences that were code reviewed, the -# following test can be applied to the code: -# -# Making sure that the entered bug-id number is correct. -# Validating that the code that was reviewed is indeed the code being -# checked in (using the bug-id number or a seperate review -# number to identify this particular code set.). -# -# If any of the above test failed, then the commit would be aborted. -# -# Actions such as mailing a copy of the report to each reviewer are -# better handled by an entry in the loginfo file. -# -# One thing that should be noted is the the ALL keyword is not -# supported. There can be only one entry that matches a given -# repository. DELETED CVSROOT/loginfo Index: CVSROOT/loginfo ================================================================== --- CVSROOT/loginfo +++ CVSROOT/loginfo @@ -1,30 +0,0 @@ -# The "loginfo" file controls where "cvs commit" log information -# is sent. The first entry on a line is a regular expression which must match -# the directory that the change is being made to, relative to the -# $CVSROOT. If a match is found, then the remainder of the line is a filter -# program that should expect log information on its standard input. -# -# If the repository name does not match any of the regular expressions in this -# file, the "DEFAULT" line is used, if it is specified. -# -# If the name ALL appears as a regular expression it is always used -# in addition to the first matching regex or DEFAULT. -# -# You may specify a format string as part of the -# filter. The string is composed of a `%' followed -# by a single format character, or followed by a set of format -# characters surrounded by `{' and `}' as separators. The format -# characters are: -# -# s = file name -# V = old version number (pre-checkin) -# v = new version number (post-checkin) -# -# For example: -#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog -# or -#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog - -# Lines to mail changes -CVSROOT $CVSROOT/CVSROOT/syncmail %{sVv} gawthrop@users.sourceforge.net -DEFAULT $CVSROOT/CVSROOT/syncmail %{sVv} mtt-checkins@lists.sourceforge.net DELETED CVSROOT/modules Index: CVSROOT/modules ================================================================== --- CVSROOT/modules +++ CVSROOT/modules @@ -1,26 +0,0 @@ -# Three different line formats are valid: -# key -a aliases... -# key [options] directory -# key [options] directory files... -# -# Where "options" are composed of: -# -i prog Run "prog" on "cvs commit" from top-level of module. -# -o prog Run "prog" on "cvs checkout" of module. -# -e prog Run "prog" on "cvs export" of module. -# -t prog Run "prog" on "cvs rtag" of module. -# -u prog Run "prog" on "cvs update" of module. -# -d dir Place module in directory "dir" instead of module name. -# -l Top-level directory only -- do not recurse. -# -# NOTE: If you change any of the "Run" options above, you'll have to -# release and re-checkout any working directories of these modules. -# -# And "directory" is a path to a directory relative to $CVSROOT. -# -# The "-a" option specifies an alias. An alias is interpreted as if -# everything on the right of the "-a" had been typed on the command line. -# -# You can encode a module within a module by using the special '&' -# character to interpose another module into the current module. This -# can be useful for creating a module that consists of many directories -# spread out over the entire source repository. DELETED CVSROOT/notify Index: CVSROOT/notify ================================================================== --- CVSROOT/notify +++ CVSROOT/notify @@ -1,12 +0,0 @@ -# The "notify" file controls where notifications from watches set by -# "cvs watch add" or "cvs edit" are sent. The first entry on a line is -# a regular expression which is tested against the directory that the -# change is being made to, relative to the $CVSROOT. If it matches, -# then the remainder of the line is a filter program that should contain -# one occurrence of %s for the user to notify, and information on its -# standard input. -# -# "ALL" or "DEFAULT" can be used in place of the regular expression. -# -# For example: -#ALL mail %s -s "CVS notification" DELETED CVSROOT/rcsinfo Index: CVSROOT/rcsinfo ================================================================== --- CVSROOT/rcsinfo +++ CVSROOT/rcsinfo @@ -1,13 +0,0 @@ -# The "rcsinfo" file is used to control templates with which the editor -# is invoked on commit and import. -# -# The first entry on a line is a regular expression which is tested -# against the directory that the change is being made to, relative to the -# $CVSROOT. For the first match that is found, then the remainder of the -# line is the name of the file that contains the template. -# -# If the repository name does not match any of the regular expressions in this -# file, the "DEFAULT" line is used, if it is specified. -# -# If the name "ALL" appears as a regular expression it is always used -# in addition to the first matching regex or "DEFAULT". DELETED CVSROOT/syncmail Index: CVSROOT/syncmail ================================================================== --- CVSROOT/syncmail +++ CVSROOT/syncmail @@ -1,323 +0,0 @@ -#! /usr/bin/python - -# NOTE: Until SourceForge installs a modern version of Python on the cvs -# servers, this script MUST be compatible with Python 1.5.2. - -"""Complicated notification for CVS checkins. - -This script is used to provide email notifications of changes to the CVS -repository. These email changes will include context diffs of the changes. -Really big diffs will be trimmed. - -This script is run from a CVS loginfo file (see $CVSROOT/CVSROOT/loginfo). To -set this up, create a loginfo entry that looks something like this: - - mymodule /path/to/this/script %%s some-email-addr@your.domain - -In this example, whenever a checkin that matches `mymodule' is made, this -script is invoked, which will generate the diff containing email, and send it -to some-email-addr@your.domain. - - Note: This module used to also do repository synchronizations via - rsync-over-ssh, but since the repository has been moved to SourceForge, - this is no longer necessary. The syncing functionality has been ripped - out in the 3.0, which simplifies it considerably. Access the 2.x versions - to refer to this functionality. Because of this, the script is misnamed. - -It no longer makes sense to run this script from the command line. Doing so -will only print out this usage information. - -Usage: - - %(PROGRAM)s [options] <%%S> email-addr [email-addr ...] - -Where options are: - - --cvsroot= - Use as the environment variable CVSROOT. Otherwise this - variable must exist in the environment. - - --context=# - -C # - Include # lines of context around lines that differ (default: 2). - - -c - Produce a context diff (default). - - -u - Produce a unified diff (smaller). - - --quiet / -q - Don't print as much status to stdout. - - --fromhost=hostname - -f hostname - The hostname that email messages appear to be coming from. The From: - header will of the outgoing message will look like user@hostname. By - default, hostname is the machine's fully qualified domain name. - - --help / -h - Print this text. - -The rest of the command line arguments are: - - <%%S> - CVS %%s loginfo expansion. When invoked by CVS, this will be a single - string containing the directory the checkin is being made in, relative - to $CVSROOT, followed by the list of files that are changing. If the - %%s in the loginfo file is %%{sVv}, context diffs for each of the - modified files are included in any email messages that are generated. - - email-addrs - At least one email address. -""" -import os -import sys -import re -import time -import string -import getopt -import smtplib -import pwd -import socket - -try: - from socket import getfqdn -except ImportError: - def getfqdn(): - # Python 1.5.2 :( - hostname = socket.gethostname() - byaddr = socket.gethostbyaddr(socket.gethostbyname(hostname)) - aliases = byaddr[1] - aliases.insert(0, byaddr[0]) - aliases.insert(0, hostname) - for fqdn in aliases: - if '.' in fqdn: - break - else: - fqdn = 'localhost.localdomain' - return fqdn - - -from cStringIO import StringIO - -# Which SMTP server to do we connect to? Empty string means localhost. -MAILHOST = '' -MAILPORT = 25 - -# Diff trimming stuff -DIFF_HEAD_LINES = 20 -DIFF_TAIL_LINES = 20 -DIFF_TRUNCATE_IF_LARGER = 1000 - -EMPTYSTRING = '' -SPACE = ' ' -DOT = '.' -COMMASPACE = ', ' - -PROGRAM = sys.argv[0] - -BINARY_EXPLANATION_LINES = [ - "(This appears to be a binary file; contents omitted.)\n" - ] - -REVCRE = re.compile("^(NONE|[0-9.]+)$") -NOVERSION = "Couldn't generate diff; no version number found in filespec: %s" -BACKSLASH = "Couldn't generate diff: backslash in filespec's filename: %s" - - - -def usage(code, msg=''): - print __doc__ % globals() - if msg: - print msg - sys.exit(code) - - - -def calculate_diff(filespec, contextlines): - file, oldrev, newrev = string.split(filespec, ',') - # Make sure we can find a CVS version number - if not REVCRE.match(oldrev): - return NOVERSION % filespec - if not REVCRE.match(newrev): - return NOVERSION % filespec - - if string.find(file, '\\') <> -1: - # I'm sorry, a file name that contains a backslash is just too much. - # XXX if someone wants to figure out how to escape the backslashes in - # a safe way to allow filenames containing backslashes, this is the - # place to do it. --Zooko 2002-03-17 - return BACKSLASH % filespec - - if string.find(file, "'") <> -1: - # Those crazy users put single-quotes in their file names! Now we - # have to escape everything that is meaningful inside double-quotes. - filestr = string.replace(file, '`', '\`') - filestr = string.replace(filestr, '"', '\"') - filestr = string.replace(filestr, '$', '\$') - # and quote it with double-quotes. - filestr = '"' + filestr + '"' - else: - # quote it with single-quotes. - filestr = "'" + file + "'" - if oldrev == 'NONE': - try: - if os.path.exists(file): - fp = open(file) - else: - update_cmd = "cvs -fn update -r %s -p %s" % (newrev, filestr) - fp = os.popen(update_cmd) - lines = fp.readlines() - fp.close() - # Is this a binary file? Let's look at the first few - # lines to figure it out: - for line in lines[:5]: - for c in string.rstrip(line): - if c in string.whitespace: - continue - if c < ' ' or c > chr(127): - lines = BINARY_EXPLANATION_LINES[:] - break - lines.insert(0, '--- NEW FILE: %s ---\n' % file) - except IOError, e: - lines = ['***** Error reading new file: ', - str(e), '\n***** file: ', file, ' cwd: ', os.getcwd()] - elif newrev == 'NONE': - lines = ['--- %s DELETED ---\n' % file] - else: - # This /has/ to happen in the background, otherwise we'll run into CVS - # lock contention. What a crock. - if contextlines > 0: - difftype = "-C " + str(contextlines) - else: - difftype = "-u" - diffcmd = "/usr/bin/cvs -f diff -kk %s --minimal -r %s -r %s %s" \ - % (difftype, oldrev, newrev, filestr) - fp = os.popen(diffcmd) - lines = fp.readlines() - sts = fp.close() - # ignore the error code, it always seems to be 1 :( -## if sts: -## return 'Error code %d occurred during diff\n' % (sts >> 8) - if len(lines) > DIFF_TRUNCATE_IF_LARGER: - removedlines = len(lines) - DIFF_HEAD_LINES - DIFF_TAIL_LINES - del lines[DIFF_HEAD_LINES:-DIFF_TAIL_LINES] - lines.insert(DIFF_HEAD_LINES, - '[...%d lines suppressed...]\n' % removedlines) - return string.join(lines, '') - - - -def blast_mail(subject, people, filestodiff, contextlines, fromhost): - # cannot wait for child process or that will cause parent to retain cvs - # lock for too long. Urg! - if not os.fork(): - # in the child - # give up the lock you cvs thang! - time.sleep(2) - # Create the smtp connection to the localhost - conn = smtplib.SMTP() - conn.connect(MAILHOST, MAILPORT) - user = pwd.getpwuid(os.getuid())[0] - domain = fromhost or getfqdn() - author = '%s@%s' % (user, domain) - s = StringIO() - sys.stdout = s - try: - print '''\ -From: %(author)s -To: %(people)s -Subject: %(subject)s -''' % {'author' : author, - 'people' : string.join(people, COMMASPACE), - 'subject': subject, - } - s.write(sys.stdin.read()) - # append the diffs if available - print - for file in filestodiff: - print calculate_diff(file, contextlines) - finally: - sys.stdout = sys.__stdout__ - resp = conn.sendmail(author, people, s.getvalue()) - conn.close() - os._exit(0) - - - -# scan args for options -def main(): - try: - opts, args = getopt.getopt( - sys.argv[1:], 'hC:cuqf:', - ['fromhost=', 'context=', 'cvsroot=', 'help', 'quiet']) - except getopt.error, msg: - usage(1, msg) - - # parse the options - contextlines = 2 - verbose = 1 - fromhost = None - for opt, arg in opts: - if opt in ('-h', '--help'): - usage(0) - elif opt == '--cvsroot': - os.environ['CVSROOT'] = arg - elif opt in ('-C', '--context'): - contextlines = int(arg) - elif opt == '-c': - if contextlines <= 0: - contextlines = 2 - elif opt == '-u': - contextlines = 0 - elif opt in ('-q', '--quiet'): - verbose = 0 - elif opt in ('-f', '--fromhost'): - fromhost = arg - - # What follows is the specification containing the files that were - # modified. The argument actually must be split, with the first component - # containing the directory the checkin is being made in, relative to - # $CVSROOT, followed by the list of files that are changing. - if not args: - usage(1, 'No CVS module specified') - subject = args[0] - specs = string.split(args[0]) - del args[0] - - # The remaining args should be the email addresses - if not args: - usage(1, 'No recipients specified') - - # Now do the mail command - people = args - - if verbose: - print 'Mailing %s...' % string.join(people, COMMASPACE) - - if specs == ['-', 'Imported', 'sources']: - return - if specs[-3:] == ['-', 'New', 'directory']: - del specs[-3:] - elif len(specs) > 2: - L = specs[:2] - for s in specs[2:]: - prev = L[-1] - if string.count(prev, ',') < 2: - L[-1] = "%s %s" % (prev, s) - else: - L.append(s) - specs = L - - if verbose: - print 'Generating notification message...' - blast_mail(subject, people, specs[1:], contextlines, fromhost) - if verbose: - print 'Generating notification message... done.' - - - -if __name__ == '__main__': - main() - sys.exit(0) DELETED CVSROOT/taginfo Index: CVSROOT/taginfo ================================================================== --- CVSROOT/taginfo +++ CVSROOT/taginfo @@ -1,20 +0,0 @@ -# The "taginfo" file is used to control pre-tag checks. -# The filter on the right is invoked with the following arguments: -# -# $1 -- tagname -# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d -# $3 -- repository -# $4-> file revision [file revision ...] -# -# A non-zero exit of the filter program will cause the tag to be aborted. -# -# The first entry on a line is a regular expression which is tested -# against the directory that the change is being committed to, relative -# to the $CVSROOT. For the first match that is found, then the remainder -# of the line is the name of the filter to run. -# -# If the repository name does not match any of the regular expressions in this -# file, the "DEFAULT" line is used, if it is specified. -# -# If the name "ALL" appears as a regular expression it is always used -# in addition to the first matching regex or "DEFAULT". DELETED CVSROOT/verifymsg Index: CVSROOT/verifymsg ================================================================== --- CVSROOT/verifymsg +++ CVSROOT/verifymsg @@ -1,21 +0,0 @@ -# The "verifymsg" file is used to allow verification of logging -# information. It works best when a template (as specified in the -# rcsinfo file) is provided for the logging procedure. Given a -# template with locations for, a bug-id number, a list of people who -# reviewed the code before it can be checked in, and an external -# process to catalog the differences that were code reviewed, the -# following test can be applied to the code: -# -# Making sure that the entered bug-id number is correct. -# Validating that the code that was reviewed is indeed the code being -# checked in (using the bug-id number or a seperate review -# number to identify this particular code set.). -# -# If any of the above test failed, then the commit would be aborted. -# -# Actions such as mailing a copy of the report to each reviewer are -# better handled by an entry in the loginfo file. -# -# One thing that should be noted is the the ALL keyword is not -# supported. There can be only one entry that matches a given -# repository. DELETED mttroot/CVSROOT/checkoutlist Index: mttroot/CVSROOT/checkoutlist ================================================================== --- mttroot/CVSROOT/checkoutlist +++ mttroot/CVSROOT/checkoutlist @@ -1,14 +0,0 @@ -# The "checkoutlist" file is used to support additional version controlled -# administrative files in $CVSROOT/CVSROOT, such as template files. -# -# The first entry on a line is a filename which will be checked out from -# the corresponding RCS file in the $CVSROOT/CVSROOT directory. -# The remainder of the line is an error message to use if the file cannot -# be checked out. -# -# File format: -# -# []

-# -# comment lines begin with '#' -syncmail DELETED mttroot/CVSROOT/commitinfo Index: mttroot/CVSROOT/commitinfo ================================================================== --- mttroot/CVSROOT/commitinfo +++ mttroot/CVSROOT/commitinfo @@ -1,15 +0,0 @@ -# The "commitinfo" file is used to control pre-commit checks. -# The filter on the right is invoked with the repository and a list -# of files to check. A non-zero exit of the filter program will -# cause the commit to be aborted. -# -# The first entry on a line is a regular expression which is tested -# against the directory that the change is being committed to, relative -# to the $CVSROOT. For the first match that is found, then the remainder -# of the line is the name of the filter to run. -# -# If the repository name does not match any of the regular expressions in this -# file, the "DEFAULT" line is used, if it is specified. -# -# If the name "ALL" appears as a regular expression it is always used -# in addition to the first matching regex or "DEFAULT". DELETED mttroot/CVSROOT/config Index: mttroot/CVSROOT/config ================================================================== --- mttroot/CVSROOT/config +++ mttroot/CVSROOT/config @@ -1,11 +0,0 @@ -# Set this to "no" if pserver shouldn't check system users/passwords -#SystemAuth=no - -# Set `PreservePermissions' to `yes' to save file status information -# in the repository. -#PreservePermissions=no - -# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top -# level of the new working directory when using the `cvs checkout' -# command. -#TopLevelAdmin=no DELETED mttroot/CVSROOT/cvswrappers Index: mttroot/CVSROOT/cvswrappers ================================================================== --- mttroot/CVSROOT/cvswrappers +++ mttroot/CVSROOT/cvswrappers @@ -1,23 +0,0 @@ -# This file affects handling of files based on their names. -# -# The -t/-f options allow one to treat directories of files -# as a single file, or to transform a file in other ways on -# its way in and out of CVS. -# -# The -m option specifies whether CVS attempts to merge files. -# -# The -k option specifies keyword expansion (e.g. -kb for binary). -# -# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers) -# -# wildcard [option value][option value]... -# -# where option is one of -# -f from cvs filter value: path to filter -# -t to cvs filter value: path to filter -# -m update methodology value: MERGE or COPY -# -k expansion mode value: b, o, kkv, &c -# -# and value is a single-quote delimited value. -# For example: -#*.gif -k 'b' DELETED mttroot/CVSROOT/editinfo Index: mttroot/CVSROOT/editinfo ================================================================== --- mttroot/CVSROOT/editinfo +++ mttroot/CVSROOT/editinfo @@ -1,21 +0,0 @@ -# The "editinfo" file is used to allow verification of logging -# information. It works best when a template (as specified in the -# rcsinfo file) is provided for the logging procedure. Given a -# template with locations for, a bug-id number, a list of people who -# reviewed the code before it can be checked in, and an external -# process to catalog the differences that were code reviewed, the -# following test can be applied to the code: -# -# Making sure that the entered bug-id number is correct. -# Validating that the code that was reviewed is indeed the code being -# checked in (using the bug-id number or a seperate review -# number to identify this particular code set.). -# -# If any of the above test failed, then the commit would be aborted. -# -# Actions such as mailing a copy of the report to each reviewer are -# better handled by an entry in the loginfo file. -# -# One thing that should be noted is the the ALL keyword is not -# supported. There can be only one entry that matches a given -# repository. DELETED mttroot/CVSROOT/loginfo Index: mttroot/CVSROOT/loginfo ================================================================== --- mttroot/CVSROOT/loginfo +++ mttroot/CVSROOT/loginfo @@ -1,31 +0,0 @@ -# The "loginfo" file controls where "cvs commit" log information -# is sent. The first entry on a line is a regular expression which must match -# the directory that the change is being made to, relative to the -# $CVSROOT. If a match is found, then the remainder of the line is a filter -# program that should expect log information on its standard input. -# -# If the repository name does not match any of the regular expressions in this -# file, the "DEFAULT" line is used, if it is specified. -# -# If the name ALL appears as a regular expression it is always used -# in addition to the first matching regex or DEFAULT. -# -# You may specify a format string as part of the -# filter. The string is composed of a `%' followed -# by a single format character, or followed by a set of format -# characters surrounded by `{' and `}' as separators. The format -# characters are: -# -# s = file name -# V = old version number (pre-checkin) -# v = new version number (post-checkin) -# -# For example: -#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog -# or -#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog - -# Lines to mail changes -CVSROOT $CVSROOT/CVSROOT/syncmail %{sVv} mtt@gawthrop.net -DEFAULT $CVSROOT/CVSROOT/syncmail %{sVv} mtt-cvs@lists.sourceforge.net - DELETED mttroot/CVSROOT/modules Index: mttroot/CVSROOT/modules ================================================================== --- mttroot/CVSROOT/modules +++ mttroot/CVSROOT/modules @@ -1,26 +0,0 @@ -# Three different line formats are valid: -# key -a aliases... -# key [options] directory -# key [options] directory files... -# -# Where "options" are composed of: -# -i prog Run "prog" on "cvs commit" from top-level of module. -# -o prog Run "prog" on "cvs checkout" of module. -# -e prog Run "prog" on "cvs export" of module. -# -t prog Run "prog" on "cvs rtag" of module. -# -u prog Run "prog" on "cvs update" of module. -# -d dir Place module in directory "dir" instead of module name. -# -l Top-level directory only -- do not recurse. -# -# NOTE: If you change any of the "Run" options above, you'll have to -# release and re-checkout any working directories of these modules. -# -# And "directory" is a path to a directory relative to $CVSROOT. -# -# The "-a" option specifies an alias. An alias is interpreted as if -# everything on the right of the "-a" had been typed on the command line. -# -# You can encode a module within a module by using the special '&' -# character to interpose another module into the current module. This -# can be useful for creating a module that consists of many directories -# spread out over the entire source repository. DELETED mttroot/CVSROOT/notify Index: mttroot/CVSROOT/notify ================================================================== --- mttroot/CVSROOT/notify +++ mttroot/CVSROOT/notify @@ -1,12 +0,0 @@ -# The "notify" file controls where notifications from watches set by -# "cvs watch add" or "cvs edit" are sent. The first entry on a line is -# a regular expression which is tested against the directory that the -# change is being made to, relative to the $CVSROOT. If it matches, -# then the remainder of the line is a filter program that should contain -# one occurrence of %s for the user to notify, and information on its -# standard input. -# -# "ALL" or "DEFAULT" can be used in place of the regular expression. -# -# For example: -#ALL mail %s -s "CVS notification" DELETED mttroot/CVSROOT/rcsinfo Index: mttroot/CVSROOT/rcsinfo ================================================================== --- mttroot/CVSROOT/rcsinfo +++ mttroot/CVSROOT/rcsinfo @@ -1,13 +0,0 @@ -# The "rcsinfo" file is used to control templates with which the editor -# is invoked on commit and import. -# -# The first entry on a line is a regular expression which is tested -# against the directory that the change is being made to, relative to the -# $CVSROOT. For the first match that is found, then the remainder of the -# line is the name of the file that contains the template. -# -# If the repository name does not match any of the regular expressions in this -# file, the "DEFAULT" line is used, if it is specified. -# -# If the name "ALL" appears as a regular expression it is always used -# in addition to the first matching regex or "DEFAULT". DELETED mttroot/CVSROOT/syncmail Index: mttroot/CVSROOT/syncmail ================================================================== --- mttroot/CVSROOT/syncmail +++ mttroot/CVSROOT/syncmail @@ -1,287 +0,0 @@ -#! /usr/bin/python - -# NOTE: Until SourceForge installs a modern version of Python on the cvs -# servers, this script MUST be compatible with Python 1.5.2. - -"""Complicated notification for CVS checkins. - -This script is used to provide email notifications of changes to the CVS -repository. These email changes will include context diffs of the changes. -Really big diffs will be trimmed. - -This script is run from a CVS loginfo file (see $CVSROOT/CVSROOT/loginfo). To -set this up, create a loginfo entry that looks something like this: - - mymodule /path/to/this/script %%s some-email-addr@your.domain - -In this example, whenever a checkin that matches `mymodule' is made, this -script is invoked, which will generate the diff containing email, and send it -to some-email-addr@your.domain. - - Note: This module used to also do repository synchronizations via - rsync-over-ssh, but since the repository has been moved to SourceForge, - this is no longer necessary. The syncing functionality has been ripped - out in the 3.0, which simplifies it considerably. Access the 2.x versions - to refer to this functionality. Because of this, the script is misnamed. - -It no longer makes sense to run this script from the command line. Doing so -will only print out this usage information. - -Usage: - - %(PROGRAM)s [options] <%%S> email-addr [email-addr ...] - -Where options is: - - --cvsroot= - Use as the environment variable CVSROOT. Otherwise this - variable must exist in the environment. - - --help / -h - Print this text. - - --context=# - -C # - Include # lines of context around lines that differ (default: 2). - - -c - Produce a context diff (default). - - -u - Produce a unified diff (smaller). - - --quiet/-q - Don't print as much status to stdout. - - <%%S> - CVS %%s loginfo expansion. When invoked by CVS, this will be a single - string containing the directory the checkin is being made in, relative - to $CVSROOT, followed by the list of files that are changing. If the - %%s in the loginfo file is %%{sVv}, context diffs for each of the - modified files are included in any email messages that are generated. - - email-addrs - At least one email address. -""" -import os -import sys -import time -import string -import getopt -import smtplib -import pwd -import socket - -from cStringIO import StringIO - -# Which SMTP server to do we connect to? Empty string means localhost. -MAILHOST = '' -MAILPORT = 25 - -# Diff trimming stuff -DIFF_HEAD_LINES = 20 -DIFF_TAIL_LINES = 20 -DIFF_TRUNCATE_IF_LARGER = 1000 - -EMPTYSTRING = '' -SPACE = ' ' -DOT = '.' -COMMASPACE = ', ' - -PROGRAM = sys.argv[0] - -BINARY_EXPLANATION_LINES = [ - "(This appears to be a binary file; contents omitted.)\n" - ] - - -def usage(code, msg=''): - print __doc__ % globals() - if msg: - print msg - sys.exit(code) - - - -def calculate_diff(filespec, contextlines): - try: - file, oldrev, newrev = string.split(filespec, ',') - except ValueError: - # No diff to report - return '***** Bogus filespec: %s' % filespec - if oldrev == 'NONE': - try: - if os.path.exists(file): - fp = open(file) - else: - update_cmd = 'cvs -fn update -r %s -p %s' % (newrev, file) - fp = os.popen(update_cmd) - lines = fp.readlines() - fp.close() - # Is this a binary file? Let's look at the first few - # lines to figure it out: - for line in lines[:5]: - for c in string.rstrip(line): - if c in string.whitespace: - continue - if c < ' ' or c > chr(127): - lines = BINARY_EXPLANATION_LINES[:] - break - lines.insert(0, '--- NEW FILE: %s ---\n' % file) - except IOError, e: - lines = ['***** Error reading new file: ', - str(e), '\n***** file: ', file, ' cwd: ', os.getcwd()] - elif newrev == 'NONE': - lines = ['--- %s DELETED ---\n' % file] - else: - # This /has/ to happen in the background, otherwise we'll run into CVS - # lock contention. What a crock. - if contextlines > 0: - difftype = "-C " + str(contextlines) - else: - difftype = "-u" - diffcmd = "/usr/bin/cvs -f diff -kk %s --minimal -r %s -r %s '%s'" % ( - difftype, oldrev, newrev, file) - fp = os.popen(diffcmd) - lines = fp.readlines() - sts = fp.close() - # ignore the error code, it always seems to be 1 :( -## if sts: -## return 'Error code %d occurred during diff\n' % (sts >> 8) - if len(lines) > DIFF_TRUNCATE_IF_LARGER: - removedlines = len(lines) - DIFF_HEAD_LINES - DIFF_TAIL_LINES - del lines[DIFF_HEAD_LINES:-DIFF_TAIL_LINES] - lines.insert(DIFF_HEAD_LINES, - '[...%d lines suppressed...]\n' % removedlines) - return string.join(lines, '') - - - -def getdomain(): - try: - fqdn = socket.getfqdn() - except AttributeError: - # Python 1.5.2 :( - hostname = socket.gethostname() - byaddr = socket.gethostbyaddr(socket.gethostbyname(hostname)) - aliases = byaddr[1] - aliases.insert(0, byaddr[0]) - aliases.insert(0, hostname) - for fqdn in aliases: - if '.' in fqdn: - break - else: - fqdn = 'localhost.localdomain' - parts = string.split(fqdn, DOT) - return string.join(parts[1:], DOT) - - - -def blast_mail(subject, people, filestodiff, contextlines): - # cannot wait for child process or that will cause parent to retain cvs - # lock for too long. Urg! - if not os.fork(): - # in the child - # give up the lock you cvs thang! - time.sleep(2) - # Create the smtp connection to the localhost - conn = smtplib.SMTP() - conn.connect(MAILHOST, MAILPORT) - user = pwd.getpwuid(os.getuid())[0] - domain = getdomain() - author = '%s@%s' % (user, domain) - s = StringIO() - sys.stdout = s - try: - print '''\ -From: %(author)s -To: %(people)s -Subject: %(subject)s -''' % {'author' : author, - 'people' : string.join(people, COMMASPACE), - 'subject': subject, - } - s.write(sys.stdin.read()) - # append the diffs if available - print - for file in filestodiff: - print calculate_diff(file, contextlines) - finally: - sys.stdout = sys.__stdout__ - resp = conn.sendmail(author, people, s.getvalue()) - conn.close() - os._exit(0) - - - -# scan args for options -def main(): - try: - opts, args = getopt.getopt(sys.argv[1:], 'hC:cuq', - ['context=', 'cvsroot=', 'help', 'quiet']) - except getopt.error, msg: - usage(1, msg) - - # parse the options - contextlines = 2 - verbose = 1 - for opt, arg in opts: - if opt in ('-h', '--help'): - usage(0) - elif opt == '--cvsroot': - os.environ['CVSROOT'] = arg - elif opt in ('-C', '--context'): - contextlines = int(arg) - elif opt == '-c': - if contextlines <= 0: - contextlines = 2 - elif opt == '-u': - contextlines = 0 - elif opt in ('-q', '--quiet'): - verbose = 0 - - # What follows is the specification containing the files that were - # modified. The argument actually must be split, with the first component - # containing the directory the checkin is being made in, relative to - # $CVSROOT, followed by the list of files that are changing. - if not args: - usage(1, 'No CVS module specified') - subject = args[0] - specs = string.split(args[0]) - del args[0] - - # The remaining args should be the email addresses - if not args: - usage(1, 'No recipients specified') - - # Now do the mail command - people = args - - if verbose: - print 'Mailing %s...' % string.join(people, COMMASPACE) - - if specs == ['-', 'Imported', 'sources']: - return - if specs[-3:] == ['-', 'New', 'directory']: - del specs[-3:] - elif len(specs) > 2: - L = specs[:2] - for s in specs[2:]: - prev = L[-1] - if string.count(prev, ',') < 2: - L[-1] = "%s %s" % (prev, s) - else: - L.append(s) - specs = L - - if verbose: - print 'Generating notification message...' - blast_mail(subject, people, specs[1:], contextlines) - if verbose: - print 'Generating notification message... done.' - - - -if __name__ == '__main__': - main() - sys.exit(0) DELETED mttroot/CVSROOT/taginfo Index: mttroot/CVSROOT/taginfo ================================================================== --- mttroot/CVSROOT/taginfo +++ mttroot/CVSROOT/taginfo @@ -1,20 +0,0 @@ -# The "taginfo" file is used to control pre-tag checks. -# The filter on the right is invoked with the following arguments: -# -# $1 -- tagname -# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d -# $3 -- repository -# $4-> file revision [file revision ...] -# -# A non-zero exit of the filter program will cause the tag to be aborted. -# -# The first entry on a line is a regular expression which is tested -# against the directory that the change is being committed to, relative -# to the $CVSROOT. For the first match that is found, then the remainder -# of the line is the name of the filter to run. -# -# If the repository name does not match any of the regular expressions in this -# file, the "DEFAULT" line is used, if it is specified. -# -# If the name "ALL" appears as a regular expression it is always used -# in addition to the first matching regex or "DEFAULT". DELETED mttroot/CVSROOT/verifymsg Index: mttroot/CVSROOT/verifymsg ================================================================== --- mttroot/CVSROOT/verifymsg +++ mttroot/CVSROOT/verifymsg @@ -1,21 +0,0 @@ -# The "verifymsg" file is used to allow verification of logging -# information. It works best when a template (as specified in the -# rcsinfo file) is provided for the logging procedure. Given a -# template with locations for, a bug-id number, a list of people who -# reviewed the code before it can be checked in, and an external -# process to catalog the differences that were code reviewed, the -# following test can be applied to the code: -# -# Making sure that the entered bug-id number is correct. -# Validating that the code that was reviewed is indeed the code being -# checked in (using the bug-id number or a seperate review -# number to identify this particular code set.). -# -# If any of the above test failed, then the commit would be aborted. -# -# Actions such as mailing a copy of the report to each reviewer are -# better handled by an entry in the loginfo file. -# -# One thing that should be noted is the the ALL keyword is not -# supported. There can be only one entry that matches a given -# repository. Index: mttroot/mtt/bin/trans/m/args2arg.m ================================================================== --- mttroot/mtt/bin/trans/m/args2arg.m +++ mttroot/mtt/bin/trans/m/args2arg.m @@ -26,6 +26,28 @@ % Field separator if nargin<3 FS = ';'; end; + +arg = ''; +if strcmp(args, '')==0 + L = length(args); + args_count = 0; + for i=1:n + arg_count = 0; + arg = ''; + if args_count == L + break; + end; + while args_count < L + args_count = args_count+1; + arg_count = arg_count+1; + ch = str2ch(args,args_count); + if ch==FS + break; + end; + arg = [arg ch]; + end; + end; +end;