#Makefile for MTT documentation

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.2  1998/07/02 18:40:07  peterg
## More on install option
##
## Revision 1.1  1998/05/14 09:19:52  peterg
## Initial revision
##
###############################################################


#MTTPATH = /home/peterg/mtt_new/mtt
#DOCPATH = /home/peterg/web-docs/software/MTT/doc
#INFOPATH = /usr/info

MTTPATH = /home/peterg/mtt_new/mtt
MTT_COMPONENTS = /home/eng4/peterg/mtt_new/mtt/lib/comp
MTT_EXAMPLES = /home/eng4/peterg/mtt_new/mtt/lib/examples
DOCPATH = /home/peterg/web-docs/software/MTT/doc
#INFOPATH = $(DOCPATH)
INFOPATH = /usr/info

all: mtt.info  mtt.html mtt.pdf mtt.ps.gz 

mtt.info: mtt.texi
	echo "Making info manual. Please wait ..."; makeinfo mtt.texi

mtt.dvi: mtt.texi
	echo "Making dvi manual. Please wait ..."; tex mtt.texi; tex mtt.texi

mtt.html: mtt.texi
	echo "Making html manual. Please wait ..."; texi2html -glossary  mtt.texi

mtt.ps.gz: mtt.dvi
	echo "Making ps manual. Please wait ..."; dvips -o mtt.ps mtt; gzip -f mtt.ps

mtt.pdf: mtt.texi
	echo "Making pdf manual. Please wait ..."; texi2pdf mtt.texi

Compound-Components_rep.ps: 
	(cd $(MTT_COMPONENTS); mtt Compound-Components rep ps)
	mv $(MTT_COMPONENTS)/Compound-Components_rep.ps .

Compound-Components_rep: 
	(cd $(MTT_COMPONENTS); mtt Compound-Components rep html)
	mv $(MTT_COMPONENTS)/Compound-Components_rep .

Examples_rep.ps: 
	(cd $(MTT_EXAMPLES); mtt Examples rep ps)
	mv $(MTT_EXAMPLES)/Examples_rep.ps .

Examples_rep: 
	(cd $(MTT_EXAMPLES); mtt Examples rep html)
	mv $(MTT_EXAMPLES)/Examples_rep .

clean:
	rm -f mtt.aux	    mtt.fns	  mtt.pg	mtt.tp
	rm -f mtt.cp	    mtt.pgs	  mtt.vr	mtt.ps
	rm -f mtt.cps	    mtt.vrs	  mtt.dvi       mtt.ps.gz
	rm -f mtt.ky	    mtt.fn	  mtt.log	mtt.toc	
	rm -f 		    mtt.ps        mtt.info-*    mtt.pdf
	rm -f mtt.html	    mtt_toc.html  mtt.info
	rm -f mtt.log       mtt.ky        mtt.toc

tidy:
	rm -f mtt.aux	    mtt.fns	  mtt.pg	mtt.tp
	rm -f mtt.cp	    mtt.pgs	  mtt.vr	
	rm -f mtt.cps	    mtt.vrs	  mtt.dvi       
	rm -f mtt.log       mtt.ky        mtt.toc


install-doc: mtt.html mtt.ps.gz  mtt.info
	cp mtt.info* $(INFOPATH)
	cp mtt.html mtt_toc.html mtt.ps.gz  $(DOCPATH)
	chmod -R a+r $(DOCPATH)
	chmod a+x  $(DOCPATH)

install-components:  Compound-Components_rep.ps Compound-Components_rep
	mv Compound-Components_rep.ps $(DOCPATH)/../components
	mv Compound-Components_rep    $(DOCPATH)/../components
	chmod -R a+r $(DOCPATH)/../components
	chmod -R a+x $(DOCPATH)/../components/Compound-Components_re

\input texinfo  
@c %**start of header
@setfilename mtt.info
@settitle MTT: Model Transformation Tools
@c %**end of header

@finalout

@c Here is what I use in the Info `dir' file:
@c * Mtt: (mtt).                Model transformation tools.



@comment %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@comment  Version control history
@comment %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@comment  $Id$
@comment  $Log$
@comment  Revision 1.66  2000/12/05 14:20:55  peterg
@comment  Added the c++  anf m CR info.
@comment
@comment  Revision 1.65  2000/11/27 15:36:15  peterg
@comment  NOPAR --> NOTPAR
@comment
@comment  Revision 1.64  2000/11/16 14:22:48  peterg
@comment  added UNITS declaration
@comment
@comment  Revision 1.63  2000/11/03 14:41:08  peterg
@comment  Added PAR and NOPAR stuff
@comment
@comment  Revision 1.62  2000/10/17 17:53:34  peterg
@comment  Added some simulation details
@comment
@comment  Revision 1.61  2000/09/14 17:13:06  peterg
@comment  New options table
@comment
@comment  Revision 1.60  2000/09/14 17:09:20  peterg
@comment  Tidied up valid name sections
@comment  Tidied up defining represnetations table
@comment  Verion 4.6
@comment
@comment  Revision 1.59  2000/08/30 13:09:00  peterg
@comment  Updated option table
@comment
@comment  Revision 1.58  2000/08/01 13:30:19  peterg
@comment  Version 4.4
@comment  updated STEPFACTOR info
@comment  describes octave and OCST interfaces
@comment
@comment  Revision 1.57  2000/07/20 07:55:44  peterg
@comment  Version 4.3
@comment
@comment  Revision 1.56  2000/05/19 17:49:17  peterg
@comment  Extended the user defined representation section -- new nppp rep.
@comment
@comment  Revision 1.55  2000/03/16 13:53:31  peterg
@comment  Correct date
@comment
@comment  Revision 1.54  2000/03/15 21:22:57  peterg
@comment  Updated to 4.1 -- old style SS no longer supported
@comment
@comment  Revision 1.53  1999/12/22 05:33:10  peterg
@comment  Updated for 4.0
@comment
@comment  Revision 1.52  1999/11/23 00:25:11  peterg
@comment  Added the sensitivity reps
@comment
@comment  Revision 1.51  1999/11/16 04:43:47  peterg
@comment  Added start of sensitivity section
@comment
@comment  Revision 1.50  1999/11/16 00:30:35  peterg
@comment  Updated simulation section
@comment  Added vector components
@comment
@comment  Revision 1.49  1999/07/20 23:44:58  peterg
@comment  V 3.8
@comment
@comment  Revision 1.48  1999/07/19 03:08:33  peterg
@comment  Added documentation for (new) SS lbl fields
@comment
@comment  Revision 1.47  1999/03/09 01:42:22  peterg
@comment  Rearranged the User interface section
@comment
@comment  Revision 1.46  1999/03/09 01:18:01  peterg
@comment  Updated for 3.5 including xmtt
@comment
@comment  Revision 1.45  1999/03/03 02:39:26  peterg
@comment  Minor updates
@comment
@comment  Revision 1.44  1999/02/17 06:52:14  peterg
@comment  New level formula dor artwork
@comment
@comment  Revision 1.43  1998/11/25 16:49:24  peterg
@comment  Put in subs.r documentation (was called params.r)
@comment
@comment  Revision 1.42  1998/11/24 12:24:59  peterg
@comment  Added section on simulation output
@comment  Version 3.4
@comment
@comment  Revision 1.41  1998/09/02 12:04:15  peterg
@comment  Version 3.2
@comment
@comment  Revision 1.40  1998/08/27 08:36:39  peterg
@comment  Removed in. methods except Euler anf implicit
@comment
@comment  Revision 1.39  1998/08/18 10:44:28  peterg
@comment  Typo
@comment
@comment  Revision 1.38  1998/08/18 09:16:38  peterg
@comment  Version 3.1
@comment
@comment  Revision 1.37  1998/08/17 16:14:30  peterg
@comment  Version 3.1 - includes documentation on METHOD=IMPLICIT
@comment
@comment  Revision 1.36  1998/07/30 17:33:15  peterg
@comment  VERSION 3.0
@comment
@comment  Revision 1.35  1998/07/22 11:00:53  peterg
@comment  Correct date!
@comment
@comment  Revision 1.34  1998/07/22 11:00:13  peterg
@comment  Version to BAe
@comment
@comment  Revision 1.33  1998/07/17 19:32:19  peterg
@comment  Added more about aliases
@comment
@comment  Revision 1.32  1998/07/05 14:21:56  peterg
@comment  Further additions (Carlisle-Glasgow)
@comment
@comment  Revision 1.31  1998/07/04 11:35:57  peterg
@comment  Strarted new lbl description
@comment
@comment  Revision 1.30  1998/07/02 18:39:20  peterg
@comment  Started 3.0
@comment  Added alias and default sections.
@comment
@comment  Revision 1.29  1998/05/19 19:46:58  peterg
@comment  Added the odess description
@comment
@comment  Revision 1.28  1998/05/14 09:17:22  peterg
@comment  Added METHOD variable to the simpar file
@comment
@comment  Revision 1.27  1998/05/13 10:03:09  peterg
@comment  Added unknown/zero SS label documentation.
@comment
@comment  Revision 1.26  1998/04/29 15:12:46  peterg
@comment  Version 2.9.
@comment
@comment  Revision 1.25  1998/04/12 17:00:26  peterg
@comment  Added new port features: coerced direction and top-level behaviour.
@comment
@comment  Revision 1.24  1998/04/05 18:27:20  peterg
@comment  This was the 2.6 version
@comment
@comment Revision 1.23  1997/08/24  11:17:51  peterg
@comment This is the released  version 2.5
@comment
@comment  Revision 1.22  1997/08/23 19:38:53  peterg
@comment  Added simulation chapter.
@comment
@comment  Revision 1.21  1997/08/23 16:50:10  peterg
@comment  Added desc section.
@comment  Included named and vector ports
@comment  Completed list of representations.
@comment
@comment Revision 1.20  1997/06/16  15:39:24  peterg
@comment THis is the released 2.4 document.
@comment
@comment Revision 1.19  1997/06/16  09:48:23  peterg
@comment Back under revision control (elm)
@comment
@comment  Revision 1.18  1997/06/14 20:27:41  peterg
@comment  Added complex example section.
@comment
@comment  Revision 1.18  1997/06/13  14:51:07  peterg
@comment  Added report section
@comment 
@comment  Revision 1.17  1997/05/09 15:06:02  peterg
@comment  Changed to version 2.4.
@comment
@comment  Revision 1.16  1996/12/05 10:06:25  peterg
@comment  Modified .octaverc : 'true' --> 1
@comment
@comment  Revision 1.15  1996/11/20 19:02:28  peterg
@comment  Added some system admin stuff.
@comment  Added section on simple models.
@comment
@comment Revision 1.14  1996/11/12  13:19:04  peterg
@comment Put paths as section, not subsection.
@comment
@comment Revision 1.13  1996/11/11  16:53:14  peterg
@comment Added params documentation
@comment Sorted out table bug.
@comment
@comment  Revision 1.12  1996/11/10 20:29:31  peterg
@comment  Added section on help -- needs more
@comment
@comment  Revision 1.11  1996/11/09 21:15:28  peterg
@comment  Rewrite of quick start.
@comment  Update of file structure.
@comment
@comment  Revision 1.10  1996/11/09 20:25:54  peterg
@comment  Final v2.0.
@comment
@comment  Revision 1.9  1996/10/01 10:33:02  peter
@comment  Cleaned up cross references.
@comment
@comment  Revision 1.8  1996/10/01 09:31:00  peter
@comment  Added sections written in Hong Kong.
@comment
@comment  Revision 1.7  1996/09/16 09:49:47  peter
@comment  Added ese section
@comment
@comment  Revision 1.6  1996/09/16 08:33:53  peter
@comment  Added constitutive relationship section etc.
@comment
@comment  Revision 1.5  1996/09/15 20:20:56  peter
@comment  Added abg and rbg stuff
@comment
@comment  Revision 1.4  1996/08/30 19:07:40  peter
@comment  Added some admin stuff.
@comment
@comment  Revision 1.3  1996/08/30 07:50:16  peter
@comment  Added file structure section.
@comment
@comment  Revision 1.2  1996/08/22 14:28:50  peter
@comment  Added stuff about labels.
@comment
@comment  Revision 1.1  1996/08/22 11:52:59  peter
@comment  Initial revision
@comment %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%


@ifinfo
This file documents MTT a set of Model Transformation Tools.


Copyright (C) Peter J. Gawthrop 1996, 1997, 1998, 1999

Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

@ignore
Permission is granted to process this file through TeX and print the
results, provided the printed document carries copying permission
notice identical to this one except for the removal of this paragraph
(this paragraph not being relevant to the printed manual).
@end ignore

Permission is granted to copy and distribute modified versions of this
manual under the conditions for verbatim copying, provided also that the
section entitled ``GNU General Public License'' is included exactly as
in the original, and provided that the entire resulting derived work is
distributed under the terms of a permission notice identical to this one.

Permission is granted to copy and distribute translations of this manual
into another language, under the above conditions for modified versions,
except that the section entitled ``GNU General Public License'' may be
included in a translation approved by the author instead of in the
original English.
@end ifinfo


@titlepage
@title MTT: Model Transformation Tools
@subtitle December 2000
@subtitle For version 4.8.
@author Peter Gawthrop
@page
@vskip 0pt plus 1filll
Copyright @copyright{} 1996,1997,1998,1999,2000 Peter J. Gawthrop

Permission is granted to make and distribute verbatim copies of
this manual provided the copyright notice and this permission notice
are preserved on all copies.

Permission is granted to copy and distribute modified versions of this
manual under the conditions for verbatim copying, provided also that the
section entitled ``GNU General Public License'' is included exactly in
the original, and provided that the entire resulting derived work is
distributed under the terms of a permission notice identical to this
one.

Permission is granted to copy and distribute translations of this manual
into another language, under the above conditions for modified versions,
except that the section entitled ``GNU General Public License'' may be
included in a translation approved by the author instead of in the
original English.

General information  about MTT is available at URL
@example
http://mtt.sourceforge.net
@end example
@ifhtml
<A
HREF="http://mtt.sourceforge.net"> here</A>.
@end ifhtml

@end titlepage


@ifinfo
@node Top, Introduction, (dir), (dir)
@top MTT
@strong{MTT} is a set of Model Transformation Tools based on bond graphs.
@strong{MTT} implements the theory to be found in the book ``Metamodelling: Bond
Graphs and Dynamic Systems'' by Peter Gawthrop and Lorcan Smith
published by Prentice Hall in 1996 (ISBN 0-13-489824-9).

It implements two features not discussed in that book:
@itemize @bullet
@item 
bicausal bond graphs and
@item
hierarchical bond graphs.
@end itemize



@contents

@end ifinfo


@c @include intro.texi
@c Copyright (C) 1996 Peter J. Gawthrop
@c This is part of the MTT manual.
@c For copying conditions, see the file MTT.texi.

@menu
* Introduction::                
* User interface::              
* Creating Models::             
* Simulation::                  
* Sensitivity models::          
* Representations::             
* Extending MTT::               
* Languages::                   
* Language tools::              
* Administration::              
* Glossary::                    
* Index::                       

@detailmenu
 --- The Detailed Node Listing ---

Introduction

* What is a Representation?::   
* What is a Transformation?::   
* Bond graphs::                 What is a bond graph?                
* Variables::                   
* Bonds::                       
* Components::                  
* Algebraic loops::             
* Switched systems::            

Components

* Ports::                       
* Constitutive relationship::   
* Symbolic parameters::         
* Numeric parameters::          

User interface

* Menu-driven interface::       
* Command line interface::      
* Options::                     
* Utilities::                   

Utilities

* Help::                        
* Copy::                        
* Clean::                       
* Version control::             

Help

* help representations::        
* help components::             
* help examples::               
* help crs::                    
* help <name>::                 

Creating Models

* Quick start::                 
* Creating simple models::      
* Creating complex models::     

Creating complex models

* Top level::                   

Simulation

* Steady-state solutions::      
* Simulation parameters::       
* Simulation input::            
* Simulation logic::            
* Simulation initial state::    
* Simulation output::           

Steady-state solutions 

* Steady-state solutions - numerical(odess)::  
* Steady-state solutions - symbolic (ss)::  

Simulation parameters

* Euler integration::           
* Implicit integration::        

Representations

* Representation summary::      
* Defining representations::    
* Verbal description (desc)::   
* Acausal bond graph (abg)::    
* Stripped acausal bond graph (sabg)::  
* Labels (lbl)::                
* Description (desc)::          
* Structure (struc)::           
* Constitutive Relationship (cr)::  
* Parameters::                  
* Causal bond graph (cbg)::     
* Elementary system equations::  
* Differential-Algebraic Equations::  
* Constrained-state Equations::  
* Ordinary Differential Equations::  
* Descriptor matrices::         
* Report::                      

Acausal bond graph (abg)

* Language fig (abg.fig)::      
* Language m (rbg.m)::          
* Language m (abg.m)::          
* Language tex (abg.tex)::      

Language fig (abg.fig) 

* icon library::                
* bonds::                       
* strokes::                     
* components::                  
* Simple components::           
* SS components::               
* Simple components - implementation::  
* Compound components::         
* Named SS components::         
* Coerced bond direction::      
* Port labels::                 
* Vector port labels::          
* Port label defaults::         
* Vector components::           
* artwork::                     
* Valid names::                 

Simple components

* SS components::               
* Simple components - implementation::  

Compound components

* Named SS components::      

Language m (rbg.m)

* Transformation abg2rbg_fig2m::  

Language m (abg.m)

* Arrow-orientated causality::  
* Component-orientated causality::  
* Transformation rbg2abg_m::    

Stripped acausal bond graph (sabg)

* Language fig (sabg.fig)::     
* Stripped acausal bond graph (view)::  

Labels (lbl)

* SS component labels ::        
* Other component labels ::     
* Component names::             
* Component constitutive relationship::  
* Component arguments::         
* Parameter declarations::      
* Units declarations::          
* Aliases::                     
* Parameter passing::           
* Old-style labels (lbl)::      

Other component labels 

* Component names::             
* Component constitutive relationship::  
* Component arguments::         
* Aliases::                     
* Parameter passing::           
* Old-style labels (lbl)::      

Aliases

* Port aliases::                
* Parameter aliases::           
* Component aliases::           

Old-style labels (lbl)

* SS component labels (old-style)::  
* Other component labels (old-style)::  
* Parameter passing (old-style)::  

Description (desc)

* Language tex (desc.tex)::     

Structure (struc)

* Language txt (struc.txt)::    
* Language tex (struc.tex)::    
* Structure (view)::            

Constitutive relationship (cr)

* Predefined constitutive relationships::  
* DIY constitutive relationships::  
* Unresolved constitutive relationships::  
* Unresolved constitutive relationships - Octave::  
* Unresolved constitutive relationships - c++::  

Predefined constitutive relationships

* lin::                         
* exotherm::                    

Parameters

* Symbolic parameters (subs.r)::  
* Symbolic parameters for simplification (simp.r)::  
* Numeric parameters (numpar)::  

Numeric parameters (numpar)

* Text form (numpar.txt)::      

Causal bond graph (cbg)

* Language fig (cbg.fig)::      
* Language m (cbg.m)::          

Language m (cbg.m)

* Transformation abg2cbg_m::    

Elementary system equations (ese)

* Transformation cbg2ese_m2r::  

Differential-Algebraic Equations (dae)

* Differential-Algebraic Equations (reduce)::  
* Differential-Algebraic Equations (m)::  

Language reduce (dae.r)

* Transformation ese2dae_r::    

Language m (dae.m)

* Transformation dae_r2m::      

Constrained-state Equations (cse)

* Constrained-state Equations (reduce)::  
* Constrained-state Equations (view)::  

Language reduce (cse.r)

* Transformation dae2cse_r::    

Ordinary Differential Equations

* Ordinary Differential Equations (reduce)::  
* Ordinary Differential Equations (m)::  
* Ordinary Differential Equations (view)::  

Language reduce (ode.r)

* Transformation cse2ode_r::    

Language m (ode.m)

* Transformation ode_r2m::      

Descriptor matrices (dm)

* Descriptor matrices (reduce)::  
* Descriptor matrices (m)::     

Report (rep)

* Report (text)::               
* Report (view)::               

Extending MTT

* Makefiles::                   
* New representations::         

Languages

* Fig::                         r
* m::                           
* Reduce::                      
* c::                           

Language tools

* Views::                       
* Xfig::                        
* Text editors::                
* Octave::                      
* LaTeX::                       

Octave

* Octave control system toolbox (OCST)::  

Administration

* Software components::         
* REDUCE setup::                
* Octave setup::                
* Paths::                       
* File structure::              

Octave setup

* .octaverc::                   

Paths

* $MTTPATH::                    
* $MTT_COMPONENTS::             
* $MTT_CRS::                    
* $MTT_EXAMPLES::               
* $OCTAVE_PATH::                

@end detailmenu
@end menu

@node Introduction, User interface, Top, Top
@chapter Introduction

@cindex MTT, purpose of

@pindex MTT

@strong{MTT} is a set of Model Transformation Tools based on bond
graphs.  @strong{MTT} implements the theory to be found in the book
``Metamodelling: Bond Graphs and Dynamic Systems'' by Peter Gawthrop and
Lorcan Smith published by Prentice Hall in 1996 (ISBN 0-13-489824-9).

It implements two features not discussed in that book:
@itemize @bullet
@item 
bicausal bond graphs and
@item
hierarchical bond graphs.
@end itemize

In the context of software, it has been said that one good tool is worth many
packages. UNIX is a good example of this philosophy: the user can put together
applications from a range of ready made tools.
This manual describes the application of this philosophy to dynamic
system modeling embodied in @strong{MTT} - a set of Model Transformation Tools
each of which implements a single transformation between system
representations.


System representations have two attributes. 
@itemize @bullet
@item
 A Form: e.g. acausal bond graph, differential algebraic, linear
                state-space etc.
@item
A Language: e.g. Fig, Matlab, LaTeX, Reduce, postscript etc.
@end itemize

Transformations in @strong{MTT} are accomplished using appropriate software (e.g.
Octave/Matlab, Reduce) encapsulated in UNIX Bourne shell scripts. The
relationships between the tools are encoded in a Make File; thus the
user can specify a final representation and all the necessary
intermediate transformations are automatically generated.

@menu
* What is a Representation?::   
* What is a Transformation?::   
* Bond graphs::                 What is a bond graph?                
* Variables::                   
* Bonds::                       
* Components::                  
* Algebraic loops::             
* Switched systems::            
@end menu


@node What is a Representation?, What is a Transformation?, Introduction, Introduction
@section What is a representation?

@cindex Representations, what are they?

@pindex Representations

Physical systems have many representations. These include
@itemize @bullet
@item
a schematic diagram,
@item
a block diagram,
@item
a bunch of equations,
@item
a single differential(-algebraic) equation,
@item
simulation code,
@item
linearised state-space (or descriptor) equations,
@item
transfer function (of the linearised system),
@item
frequency response  (of the linearised system),
@item
etc...
@end itemize

Each of these representations is related to other representations by an
appropriate transformation (@pxref{What is a Transformation?}. In many cases, a
modeler is presented with a physical system and needs to make a
model. In particular, a model, in this context, is a representation of
the system appropriate to a particular use, for example:
@itemize @bullet
@item
simulation,
@item
control system design,
@item
optimisation
@item
etc.
@end itemize

Indeed, for a given physical system, the modeler would need to derive
a number of models. This process can be viewed as a series of steps;
each involving a transformation between representations (@pxref{What is a Transformation?}.


In this context, the following considerations are relevant.
@itemize @bullet
@item
There is a unique `core' representation of any system.
There are many routes  from this core representation, each leading to
an appropriate model.
There are many possible routes  to this core representation
from the physical system: the route chosen is a matter of convenience.
@item
Because the core representation is unique, it is easy to expand the
tool-box to include additional transformations from the physical system
to the core representation and additional transformations from the core
representation to the mode.
@item
Transformation_1 probably cannot, and certainly should not, be
completely automated.  Engineering insight, knowledge and experience is
essential to capture the essence (with respect to the particular use) of
the physical system whilst discarding irrelevant form.
@item
Representation_1 should be `close' in some sense to the Physical system.
@item
The core representation, and hence the representations leading to it,
must contain enough information to generate all of the required models.
@item
Representations must be easily extensible: it must be possible to add
extra components or attributes without restructuring the representation.
@end itemize

I happen to believe that Bond graphs (@pxref{Bond graphs}) provide the
most convenient and powerful basis for the core representation.

@node What is a Transformation?, Bond graphs, What is a Representation?, Introduction
@comment  node-name,  next,  previous,  up
@section What is a transformation?
@cindex Transformations


Each system representation  (@pxref{What is a Representation?} is related to other representations by an
appropriate transformation as follows:
@itemize @bullet 
@item
 Physical system
@item
 Transformation_1 ---> Representation_1
@item
 Transformation_2 ---> Representation_2
@item
 ...
@item
 Transformation_N ---> Core representation
@item
 Transformation_N+1 ---> Representation_N+1
@item
 Transformation_N+2 ---> Representation_N+2
@item
 ...
@item
 Transformation_N+M ---> Model
@end itemize
Thus modeling is seen as a sequence of transformations between
representations.



@node Bond graphs, Variables, What is a Transformation?, Introduction
@section What is a bond graph?

@cindex Bond graphs, what are they?

@pindex Bond graphs

Bond graphs provide a graphical high-level language for describing
dynamic systems in a precise and unambiguous fashion. 
They make a clear distinction between structure (how components are
connected together), and behavior (the particular constitutive
relationships, or physical laws, describing each component.

They can describe a range of physical systems including:
@itemize @bullet
@item
Electrical systems
@item
Mechanical systems
@item
Hydraulic systems
@item
Chemical process systems
@end itemize

More importantly, they can describe systems which contain subsystems
drawn from all of these domains in a uniform manner.

Bond graphs are made up of components (@pxref{Components}) connected by
bonds (@pxref{Bonds}) which define the relationship between
variables (@pxref{Variables}).

@node Variables, Bonds, Bond graphs, Introduction
@comment  node-name,  next,  previous,  up
@section Variables
@cindex Variables
In bond graph terminology there are four sorts of variables:
@itemize @bullet
@item  @emph{effort} variables
@item  @emph{flow} variables
@item  @emph{integrated effort} variables
@item  @emph{integrated flow} variables
@end itemize

Examples of  @emph{effort} variables are
@itemize @bullet
@item 
voltage
@item 
pressure
@item
force
@item
torque
@item
temperature
@end itemize

Examples of  @emph{flow} variables are
@itemize @bullet
@item 
current
@item 
volumetric flow rate
@item
velocity
@item
angular velocity
@item
heat flow
@end itemize



Examples of integrated  @emph{flow} variables are
@itemize @bullet
@item 
charge
@item 
volume
@item
momentum
@item
angular momentum
@item
heat
@end itemize



@node Bonds, Components, Variables, Introduction
@comment  node-name,  next,  previous,  up
@section Bonds
@cindex Bonds
Bonds connect components (@pxref{Components}) together. Each bond
carries two variables:
@itemize @bullet
@item an effort (@pxref{Variables}) variable and 
@item a flow (@pxref{Variables}) variable.
@end itemize
Each bond has three notations associated with it:
@itemize @bullet
@item a half-arrow,
@item a causal stroke and
@item a causal half-stroke.
@end itemize

The half-arrow indicates two things:
@itemize @bullet
@item the direction of power (or pseudo power) flow and
@item the side of the bond associated with the flow variable.
@end itemize

The causal stroke indicates two things:
@itemize @bullet
@item the effort variable is imposed at the same end as the stroke and
@item the flow variable is imposed at the opposite end to the stroke.
@end itemize

The causal half-stoke indicates one thing:
@itemize @bullet
@item if it is on the effort side of the bond, the effort variable is 
imposed at the same end as the stroke or
@item if it is on the flow side of the bond, the flow variable is 
imposed at the opposite end to the stroke.
@end itemize



@node Components, Algebraic loops, Bonds, Introduction
@comment  node-name,  next,  previous,  up
@section  Components
@cindex Components

Components provide the building blocks of a dynamic system when
connected by bonds (@pxref{bonds}).
Components have the following attributes:
@vtable @code
@item ports 
        provide the connections to other components (@pxref{Ports})
@item constitutive relationships
        define how the port-variables are related (@pxref{Constitutive
relationship})
@end vtable


@menu
* Ports::                       
* Constitutive relationship::   
* Symbolic parameters::         
* Numeric parameters::          
@end menu

@node Ports, Constitutive relationship, Components, Components
@comment  node-name,  next,  previous,  up
@subsection Ports
@cindex ports
Components have one or more ports. Each port carries two variables,
and effort and a flow variable (@pxref{Variables}). Any pair of ports
can be connected by a bond (@pxref{Bonds}); this connection is
equivalent to saying that the effort variables at each port are
identical and that the flow variables at each port are
identical.

Ports are implemented in @strong{MTT} using named SS components.
(@pxref{Named SS components}).

The direction of the named SS components.
(@pxref{Named SS components}) 
is coerced (@pxref{Coerced bond direction}) to have the same direction
as the bons connected to the corresponding port. Thus the direction of
the  direction of the named SS components has no significance unless the
component is at the top level.

@node Constitutive relationship, Symbolic parameters, Ports, Components
@comment  node-name,  next,  previous,  up
@subsection  Constitutive relationship
@cindex Constitutive Relationship

The constitutive relationship of a component defines how the port
variables are related. This relationship may be linear
or non-linear. This typically contains symbolic parameters
(@pxref{Symbolic parameters}) which may be replaced, for the purposes
of numerical analysis by numeric parameters
(@pxref{Numeric parameters}).

@node Symbolic parameters, Numeric parameters, Constitutive relationship, Components
@comment  node-name,  next,  previous,  up
@subsection Symbolic parameters
@cindex Symbolic parameters
The constitutive relationship of a system component (@pxref{Components})
typically contains  symbolic parameters. For example a resistor may have
a symbolic resistance r. It is convenient to leave such parameters as
symbols when viewing equations or when performing symbolic analysis such
as differentiation.

However, @strong{MTT} allows replacement of symbolic parameters by
numeric parameters (@pxref{Numeric parameters}) when appropriate.

@node Numeric parameters,  , Symbolic parameters, Components
@comment  node-name,  next,  previous,  up
@subsection Numeric parameters
@cindex Numeric parameters
Numerical parameters are needed to give specific values to symbolic
parameters (@pxref{Symbolic parameters}) for the purposes of numeric
analysis;
for example: simulation, graph plotting or use within a numerical
package such as Octave (@pxref{Octave}).


@node Algebraic loops, Switched systems, Components, Introduction
@section Algebraic loops
@cindex Algebraic loops
Following Chapter 3 of the book, algebraic loops appear as under-causal
components in the bond graph. It is up to the modeler to indicate how these loops
are to be resolved by adding appropriate SS elements.

For more information, refer to:
``Metamodelling: Bond Graphs and Dynamic Systems'' by Peter Gawthrop and
Lorcan Smith published by Prentice Hall in 1996 (ISBN 0-13-489824-9).

@node Switched systems,  , Algebraic loops, Introduction
@comment  node-name,  next,  previous,  up
@section Switched systems
@cindex Switched systems
@cindex Hybrid systems
@cindex logic

Some systems contain switch-like components. For example an electrical
system may contain on-off switches and diodes and a hydraulic system may
shut-off valves and non-return valves. 

Such systems are sometimes called hybrid systems. The modelling an
simulation of such systems is the subject of current research.
@strong{MTT} implements a simple pragmatic approach to the modelling and
simulation of such systems via two new Bond Graph components:
@vtable @code
@item ISW     
        a switched @code{I} component
@item CSW     
        a switched @code{C} component
@end vtable

These switches are user controlled through the logic representation
(@pxref{Simulation logic}).

@node User interface, Creating Models, Introduction, Top
@comment  node-name,  next,  previous,  up
@chapter User interface
@cindex User interface
@pindex User interface
There are two user interfaces to  @strong{MTT}: a command line interface
(@pxref{Command line interface}) and a menu-driven interface
(@pxref{Menu-driven interface}).

@menu
* Menu-driven interface::       
* Command line interface::      
* Options::                     
* Utilities::                   
@end menu

@node Menu-driven interface, Command line interface, User interface, User interface
@comment  node-name,  next,  previous,  up
@section Menu-driven interface
@cindex Menu-driven interface
@pindex Menu-driven interface
The Menu-driven interface for @strong{MTT} is invoked as:
@example
xmtt
@end example
This will bring up a menu which should be self explanatory :-).
Various messages will be echoed in the window from whence @strong{xMTT}
was invoked.

@node Command line interface, Options, Menu-driven interface, User interface
@comment  node-name,  next,  previous,  up
@section Command line interface
@cindex Command line interface
@pindex Command line interface
The command line interface for @strong{MTT} is of the form:
@example
mtt [options] <system_name> <representation> <language>
@end example
@vtable @code
@item [options]
        the (optional) option switches  (@pxref{Options})
@item <system_name>    
        the name of the system being transformed 
@item <representation>    
        the mnemonic for the system representation (@pxref{Representation summary})
@item <language>    
        the mnemonic for language for the representation (@pxref{Languages})
@end vtable
for example
@example
mtt rc rep view
@end example
creates a view of the report describing system rc and
@example
mtt rc sm m
@end example
creates an m file (suitlable for Octave or Matlab) containing state
matrices describing the system rc.
@node Options, Utilities, Command line interface, User interface
@comment  node-name,  next,  previous,  up
@section Options
@cindex Options

@strong{MTT} has a number of optional switches to control its
operation. These are invoked immediately after `mtt' on the command
line; for example:
@example
mtt -o -s -c syst cbg view
@end example
invokes the @code{-o}, @code{-s}, and @code{-c} options.

The available options are:
@vtable @code
@item -q
        quiet mode -- suppress MTT banner
@item -A 
        solve algebraic equations symbolically
@item -D 
        debug -- leave log files etc
@item -I 
        prints more information
@item -abg 
       start at abg.m representation
@item -c 
        c-code generation
@item -d 
        <dir>  use directory <dir>
@item -dc 
       Maximise derivative (not integral) causality
@item -dc 
       Maximise derivative (not integral) causality
@item -i 
       <implicit|euler>   Use implicit or euler integration
@item -o 
       ode is same as dae
@item -oct 
       use oct files in place of m files where appropriate
@item -opt 
       optimise code generation
@item -p 
        print environment variables
@item -partition 
       partition hierachical system
@item -r 
        reset time stamp on representation
@item -s 
        try to generate sensitivity BG (experimental)
@item -ss 
       use steady-state info to initialise simulations
@item -stdin 
       read input data from standard input for  simulations
@item -sub 
       <subsystem> operate on this subsystem
@item -t 
        tidy mode (default)
@item -u 
        untidy mode (leaves files in current dir)
@item -v 
        verbose mode
@item -viewlevel 
       <N> View N levels of hierachy
@item --version 
       print version and exit
@item --versions 
       print version of mtt and components and exit
@end vtable

@node Utilities,  , Options, User interface
@comment  node-name,  next,  previous,  up
@section Utilities
@cindex Utilities
@pindex Utilities
@strong{MTT} provides some utilities to help you keep track of model
building and to keep things clean and tidy. The commands, and there
purpose are:
@ftable @code
@item mtt help
        Lists the help/browser commands
@item mtt copy <system>
        Copies the system (ie directory and enclosed files) to the
current working directory.
@item mtt rename <old_name> <new_name>
        Renames all of the defining representations (@pxref{Defining
representations}) and textually changes each file appropriately.
@item mtt <system> clean
        Remove all files generated by @strong{MTT} associated with
system `system'.
@item mtt clean
        Remove all files generated by @strong{MTT} associated with
all systems within the current directory.
@item mtt system representation vc
        Apply version control to representation `representation' of
system `system'.
@item mtt system vc
        Apply version control to all representations (under version control)
system `system'.
@end ftable
These are described in more detail in the following sections.

@menu
* Help::                        
* Copy::                        
* Clean::                       
* Version control::             
@end menu

@node Help, Copy, Utilities, Utilities
@comment  node-name,  next,  previous,  up
@subsection Help
@cindex Help
@cindex browser
@strong{MTT} implements a browser to keep track of all the systems,
subsystems and constitutive relationships that you, and others may
write. It is invoked in the following ways:
@example
       mtt help representations
       mtt help components
       mtt help examples 
       mtt help crs
       mtt help representations <match_string>
       mtt help components <match_string>
       mtt help examples  <match_string>
       mtt help crs <match_string>
       mtt help <component_or_example_or_CR_name>
@end example

@menu
* help representations::        
* help components::             
* help examples::               
* help crs::                    
* help <name>::                 
@end menu

@node help representations, help components, Help, Help
@comment  node-name,  next,  previous,  up
@subsubsection help representations
@cindex help
@cindex representations

The command 
@example
mtt help representations
@end example
lists all of the representations  (@pxref{Representations}) available in
@strong{MTT}. These may change as the version number of @strong{MTT}
increases.

The command 
@example
mtt help representations <match_string>
@end example
lists those representation which contain the string @code{match_string}.
This string can be any regular expression  (see standard Linux
documentation under @code{awk}).
For example
@example
mtt help representations descriptor
@end example
gives all representations containing the word @code{descriptor}.

@node help components, help examples, help representations, Help
@comment  node-name,  next,  previous,  up
@subsubsection help components
@cindex help
@cindex components

The command 
@example
mtt help components
@end example
lists all of the components  (@pxref{Components}) available in
@strong{MTT}. These may change as the version number of @strong{MTT}
increases.

The command 
@example
mtt help components <match_string>
@end example
lists those component which contain the string @code{match_string}.
This string can be any regular expression  (see standard Linux
documentation under @code{awk}).
For example
@example
mtt help components source
@end example
gives all components containing the word @code{component}.

@node help examples, help crs, help components, Help
@comment  node-name,  next,  previous,  up
@subsubsection help examples
@cindex help
@cindex examples

This command provides a good way to get started in @strong{MTT}. having
found an interesting example, copy it to your working directory using
@example
mtt copy <example_name>
@end example
(@pxref{Copy})

@example
mtt help examples
@end example
lists all of the examples  available in
@strong{MTT}. 
This list will change as more examples are added.

The command 
@example
mtt help examples <match_string>
@end example
lists those component which contain the string @code{match_string}.
This string can be any regular expression  (see standard Linux
documentation under @code{awk}).
For example
@example
mtt help examples pharmokinetic
@end example
gives all examples containing the word @code{pharmokinetic}.

@node help crs, help <name>, help examples, Help
@comment  node-name,  next,  previous,  up
@subsubsection help crs
@cindex help
@cindex crs

The command 
@example
mtt help crs
@end example
lists all of the constitutive relationships   (@pxref{Constitutive
relationship}) available in
@strong{MTT}. These may change as the version number of @strong{MTT}
increases.

The command 
@example
mtt help crs <match_string>
@end example
lists those constitutive relationships which contain the string @code{match_string}.
This string can be any regular expression  (see standard Linux
documentation under @code{awk}).
For example
@example
mtt help crs sin
@end example
gives all crs containing the word @code{sin}.

@node help <name>,  , help crs, Help
@comment  node-name,  next,  previous,  up
@subsubsection help <name>
@cindex help
@cindex <name>

The command 
@example
mtt help <name>
@end example
gives a detailed description of the entity called @code{name}.

@node Copy, Clean, Help, Utilities
@comment  node-name,  next,  previous,  up
@subsection Copy
@cindex Copy

@strong{MTT} provides a way of copying examples to your working directory:
@example
mtt copy <example_name>
@end example

Use the  command
@example
mtt help examples
@end example
(@pxref{help examples}) to find something of interest.

Note that components and constitutive relationships are automatically
copied when required.

@node Clean, Version control, Copy, Utilities
@comment  node-name,  next,  previous,  up
@subsection Clean
@cindex Clean
@strong{MTT} generates a lot of representations in a number of
languages.
Some of these you will edit yourself; others can always be recreated by
@strong{MTT}. It makes sense, therefore to have a utility that removes
all of these other files when you have finished actively working with a
particular system. These are two versions:
@enumerate
@item
@code{mtt system clean}
@item
@code{mtt clean}
@end enumerate
The first removes all files that can be regenerated with @strong{MTT}
associated with system `system'; the second removes all such files
associated with all systems in the current working directory.

The files which remain after such a clean are the Defining
representations (@pxref{Defining representations}).

@node Version control,  , Clean, Utilities
@comment  node-name,  next,  previous,  up
@subsection Version control
@cindex Version control

When you are working on a modeling project, it is easy to forget what
changes you made to a system and why you made them. Sometimes, you may
regret some changes and wish to revert to an earlier version: even if
you use .old files this may be difficult to achieve safely.

These are very similar problems to those faced by software developers
and can be solved in the same way: using version control.@strong{MTT}
provides version control using the standard GNU Revision Control System
(RCS). This is hidden from the user, but is fully complementary to
direct use of RCS (e.g. via emacs vc commands) to the more experienced
user who wishes to do so.

The only files that you should ever change (i.e. the ones never
overwritten by @strong{MTT}) are the Defining representations
(@pxref{Defining representations}).

All of the files, with the exception of @code{system_abg.fig}, 
are initially created by @strong{MTT} and contain the RCS header for
version control.


The @strong{MTT} version control will automatically expand this part of
the text to include all change comments that you give it -- so will
direct use of RCS (e.g. via emacs vc commands)

The @strong{MTT} version commands are as follows:
@ftable @code
@item mtt system representation vc
        Apply version control to representation `representation' of
system `system'.
@item mtt system vc
        Apply version control to all representations (under version control)
system `system'.
@end ftable

The first is appropriate after you have made a revision to a single
file.  It will prompt you for a change comment; this will be
automatically included in the file header. In addition, enough
information will be saved to enable any  version to be retrieved via
RCS.

The second is appropriate to record the state of the entire model. This
assumes that all relevant files have been recorded by the first version
of the command.  Once again, old versions of the entire model can be
retrieved using the relevant RCS commands.

A subdirectory `RCS' is created to hold this information. You need not
bother about the contents, except that you must not delete any files
within `RCS'.

@node Creating Models, Simulation, User interface, Top
@comment  node-name,  next,  previous,  up
@chapter Creating Models
@cindex  Creating Models

@strong{MTT} helps you to analyse and transform system models --
ultimately the process of capturing the real world in a model is up to
you.  This chapter discusses the @strong{MTT} aspects of creating a
model. For convenience, this is divided into creating simple models and
creating complex models.

@menu
* Quick start::                 
* Creating simple models::      
* Creating complex models::     
@end menu

@node Quick start, Creating simple models, Creating Models, Creating Models
@section Quick start
@cindex Quick start
@pindex Quick start

It is probably worth a quick skim though @strong{MTT} to get a flavour of
what it can do before plunging into the detail of the rest of this
document. Here is a series of commands to do this.

Copy an initial set of files describing the bond graph.
@example
mtt copy rc
@end example
@noindent 
Move to it.
@example
cd rc
@end example
@noindent 
@noindent 
View the acausal bond graph (the system is called ``rc'').
@example
mtt rc abg view
@end example
@noindent 
View the causal bond graph of the system.
@example
mtt rc cbg view
@end example
@noindent 
View the corresponding ordinary differential equations (ode).
@example
mtt rc ode view
@end example
@noindent 
View the system (output) step response
@example
mtt rc sro view
@end example

@noindent 
An alternative (but more general) way of achieving the same result is
@example
mtt -c rc odeso view
@end example

@noindent 
View the system transfer function
@example
mtt rc tf view
@end example
@noindent 
View the log modulus frequency response of the system.
@example
mtt rc lmfr view
@end example

@noindent 
View the log modulus frequency response of the system for 100
logarithmically spaced frequencies in the range 0.1 to 10
radians per second.
@example
mtt rc lmfr view 'W=logspace(-1,1,100);'
@end example

@strong{MTT} has a report generation ((@pxref{Report}) facility which
can generate a hypertext description of the system.
@example
mtt rc rep hview
@end example

The report contents are specified by the rep representation
(@pxref{Report}), in this case the corresponding file is:
@example
% %% Outline report file for system rc (rc_rep.txt)

mtt rc abg tex
mtt rc struc tex
mtt rc cbg ps
mtt rc ode tex
mtt rc ode dvi
mtt rc sm tex
mtt rc tf tex
mtt rc tf dvi
mtt rc sro ps
mtt rc lmfr ps
mtt rc odes h
mtt rc numpar txt
mtt rc input txt
mtt -c rc odeso ps
mtt rc rep txt
@end example
A non-hypertext version can be viewed using:
@example
mtt rc rep view
@end example

Now have a go at modifying the bond graph.
@example
mtt rc abg fig
@end example
This brings up the bond graph in Xfig (@pxref{Xfig}).  Try creating a
system with two rs and 2 cs.

More examples can be found using
@example
mtt help examples
@end example
Details of an example can be found using
@example
mtt help <example_name>
@end example
and copied using
@example
mtt copy <example_name>
@end example

Lots of examples are available.
@example
mtt help examples
@end example
lists them and
@example
mtt copy <name>
@end example
gets you an example.

@ifhtml
A number of examples are to be found
<A
HREF="http://www.mech.gla.ac.uk/~peterg/software/MTT/examples/Examples/Examples.html"> here</A>.
@end ifhtml

@node Creating simple models, Creating complex models, Quick start, Creating Models
@comment  node-name,  next,  previous,  up
@section Creating simple models
@cindex Creating simple models

For then purposes of this section, simple models are those which are
built up from bond graphs involving predefined components. In contrast,
more complex systems (@pxref{Creating complex models}) need to be built
up hierarchically.

The recommended sequence of steps to create a simple model is:
@enumerate
@item Decide on a name for the system; let us call it `syst' for the
  purposes of this discussion. 
@item Invoke the Bond Graph editor to draw the acausal Bond Graph.
@example
  mtt syst abg fig
@end example
@item Draw the Bond Graph  (@pxref{Language fig (abg.fig)}), including
  the bonds (@pxref{Bonds}), the components (@pxref{Components}) and any
  artwork (@pxref{artwork}) to make the Bond Graph more readable. The
  graphical editor xfig is (@pxref{Xfig}) is self-explanatory.
  The icon library is helpful here (see @pxref{icon library}).
@item Add causal strokes (@pxref{strokes}) where needed to define
  causality. As a general rule, use the minimum number of strokes needed
  to define the problem; this will often be only on the @code{SS} components.
  (@pxref{SS components}).
  
  Save the bond graph.
  
@item View the corresponding causal bond graph.
@example
  mtt syst cbg view
@end example
@enumerate
@item 
    At this stage, @strong{MTT} will warn you that the labeled components do
    not appear in the label file - this can safely be ignored.
@item
  @strong{MTT} will indicate the percentage of components which are
    causally complete -- ideally this will be 100\%. Components which are
    not causally complete will be listed.
@item
    A view of the causal bond graph will be created. The added causal
    strokes are indicated in blue, undercausal components in green and
    overcausal components in red.
@item
    If the bond graph is causally complete, proceed to the next step,
    otherwise think hard and return to the first step.
@end enumerate

@item
At this stage, no constitutive relationships have been
defined. Nevertheless, @strong{MTT} will proceed in a semi-qualitative
fashion by assuming that all constitutive relationships are unity (and
therefore linear). It may be useful at this stage to view various
derived representations to check the overall model properties before
proceeding further. For example:
@enumerate
@item
View the system Differential-algebraic equations
@example
mtt syst dae view
@end example
@item
View the system state matrices
@example
mtt syst sm view
@end example
@item
View the system transfer function
@example
mtt syst tf view
@end example
@item
View the system step response
@example
mtt syst sro view
@end example
@end enumerate

@item
As well as creating the causal bond graph, @strong{MTT} has also
generated templates for other text files 
(@pxref{Defining representations})
used to further specify the
system.
These can now be edited using your favorite text editor (@pxref{Text
editors}).

@item @strong{MTT} will now generate the representations
(@pxref{Representation summary})that you desire.
For example the system can be simulated by
@example
mtt syst odeso view
@end example
@strong{MTT} will complain if a component is named in the bond graph but
not in the label file and vice versa. This mainly to catch typing errors.

@end enumerate

@node Creating complex models,  , Creating simple models, Creating Models
@comment  node-name,  next,  previous,  up
@section Creating complex models
@cindex Creating complex models

Complex models -- in distinction to simple models (@pxref{Creating
simple models}) -- have a hierarchical structure. In particular, bond
graph components can be created by specifying their bond
graph. Typically, such components will have more than one port
(@pxref{Ports}); within each component, ports are represented by
named SS components (@pxref{Named SS components}); outwith
each component, ports are unambiguously identified by 
labels (@pxref{Port labels}) and vector labels (@pxref{Vector port labels}).

Complex models are thus created by conceptually decomposing the system
into simple subsystems, and then creating the corresponding bond graphs.
The procedure for simple systems (@pxref{Creating simple models}) is
then followed using the top level system (@pxref{Top level}); @strong{MTT} then recursively
operates on the lower level systems.

The report representation (@pxref{Report}) provides a convenient way of
viewing a complex system.

An example of such a system can be created as follows:
@example
mtt copy twolink
mtt twolink rep hview
@end example

@ifhtml
The result is <A
HREF="./examples/twolink/twolink_rep/twolink_rep.html"> here</A>.
@end ifhtml

@menu
* Top level::                   
@end menu

@node Top level,  , Creating complex models, Creating complex models
@comment  node-name,  next,  previous,  up
@subsection Top level
@cindex Top level
The top level of a complex model contains subsystems but is not, itself,
contained by other systems. 
It has the following special features:
@itemize @bullet
@item
its name is used in the mtt command as the system name.
@item
all named SS componenents (@pxref{Named SS components}) are treated as
ordinary SS components (@pxref{SS components}).
@end itemize



@c      node   next  prev  up
@node Simulation, Sensitivity models, Creating Models, Top
@chapter Simulation
@cindex Simulation
@pindex Simulation
One purpose of modelling is to simulate the modeled dynamic
system. Although this is just another transformation (@pxref{What is a
Transformation?}) and therefore is covered in the appropriate chapter
(@pxref{Representations}), it is important enough to be given its own
chapter.

Simulation is typically performed using an appropriate simulation
language (which is often inappropriately conflated with modelling
tools). @strong{MTT} provides a number of alternative routes to
simulation based on the following representations (@pxref{Representations}):
@ftable @code
@item cse
        constrained-state differential equation form
@item ode
        ordinary differential (or state-space) equations
@c  @item dae
@c          differential-algebraic (or generalised state-space) equations --
@c  these may be linear or nonlinear.
@end ftable
in each case these equations may be
linear or nonlinear.

Special cases of numerical simulation, appropriate to @emph{linear}
systems, are:
@ftable @code
@item   ir
        impulse response - state 
@item   iro
        impulse response - output 
@item   sr
        impulse response - state 
@item   sro
        impulse response - output 
@end ftable

There are a number of languages (@pxref{Languages}) which can be used to describe these
representations for the purposes of numerical simulation:
@ftable @code
@item m
        @code{octave} a high-level interactive language for numerical
        computation.
@item c
        @code{gcc} a c compiler.
@end ftable

There are a number solution algorithms available:
@itemize @bullet
@item
explicit solution via the matrix exponential
@item
backward Euler integration (explicit)
@item
forward Euler integration (implicit)
@c  @item
@c  LSODE (Hindmarsh's ODE solver as implemented in Octave)
@c  @item
@c  DASSL (Petzold's DAE solver as implemented in Octave) (Unavailable just now)
@end itemize

 However, all combinations of representation, language and solution
method are not supported by @strong{MTT} at the moment. Given a system
`system', some recommended commands are:
@ftable @code
@item mtt system iro view
        creates the impulse response of a @emph{linear} system via the
system_sm.m representation using explicit solution via the matrix exponential.
@item mtt system sro view
        creates the step response of a @emph{linear} system via the system_sm.m
representation using explicit solution via the matrix exponential.
@c  @item mtt system odeso view
@c          creates the step response of a @emph{nonlinear} system via the
@c  system_ode.m representation using either METHOD=Euler or
@c  METHOD=LSODE in the parameter file (@pxref{Simulation parameters}).
@item mtt -c system odeso view
        creates the response of a @emph{nonlinear} system via the
system_ode.c representation using implicit integration.
@item mtt -c -i euler system odeso view
        creates the response of a @emph{nonlinear} system via the
system_ode.c representation using euler integration.
@end ftable

Simulation parameters are described in the system_simpar.txt file
(@pxref{Simulation parameters}).

The steady-state solution of a system can also be
``simulated''(@pxref{Steady-state solutions}).
@menu
* Steady-state solutions::      
* Simulation parameters::       
* Simulation input::            
* Simulation logic::            
* Simulation initial state::    
* Simulation output::           
@end menu

@node Steady-state solutions, Simulation parameters, Simulation, Simulation
@comment  node-name,  next,  previous,  up
@section Steady-state solutions 
@cindex Steady-state solutions

@menu
* Steady-state solutions - numerical(odess)::  
* Steady-state solutions - symbolic (ss)::  
@end menu

@node Steady-state solutions - numerical(odess), Steady-state solutions - symbolic (ss), Steady-state solutions, Steady-state solutions
@comment  node-name,  next,  previous,  up
@subsection Steady-state solutions (odess)
@cindex Steady-state solutions - numerical

@strong{MTT} can compute the steady-state solutions of an ordinary
differential equation; this used the octave function `fsolve'. The
solution is computed as a function of time using the input specified in
the input file. The simulation parameter file (@pxref{Simulation
parameters}) is used to provide the time scales.

For example
@example
mtt copy rc
cd rc
mtt rc odess view
@end example

@node Steady-state solutions - symbolic (ss),  , Steady-state solutions - numerical(odess), Steady-state solutions
@comment  node-name,  next,  previous,  up
@subsection Steady-state solutions (ss) 
@cindex Steady-state solutions - symbolic
A rudimentary form of steady-state solution exists in mtt.
The steady states and inouts are supplied by the user in the file
system_simpar.r and the corresponding output and sate derivative
computed by @strong{MTT} using
@example
mtt system ss view
@end example

For example
@example
mtt copy rc
cd rc
mtt rc sspar view
mtt rc ss view
@end example


@node Simulation parameters, Simulation input, Steady-state solutions, Simulation
@comment  node-name,  next,  previous,  up
@section Simulation parameters
@cindex Simulation parameters

Simulation parameters are set in the system_simpar.txt file. At the
moment this sets the following variables:
@itemize @bullet
@item LAST
        the last simulation time
@item DT
        the incremental time (for plotting)
@item STEPFACTOR
        the number of integration steps per DT -- thus the integration
        interval is DT/STEPFACTOR
@c ; for sparse implicit integration (@pxref{Sparse
@c implicit integration}) the number of conjugate-gradient minimisation
@c steps.
@c  @item METHOD
@c          The integration methods available appear in the following table
@item WMIN
        Minimum frequency = 10^WMIN
@item WMAX
        Maximum frequency = 10^WMAX
@item WSTEPS
        Number of Frequency steps.
@item INPUT
        The input index for frequency response
@end itemize

There are two integration algorithms
@itemize @bullet
@item Euler
        basic Euler integration (@pxref{Euler integration}). This method
is simple, but not recommended for stiff systems.
@item Implicit
        semi-implicit integration  (@pxref{Implicit integration}) - uses the smx representation to give
        stability.
@c @item ImplicitS
@c         Sparse semi-implicit integration  (@pxref{Sparse implicit integration})
@c -- takes advantage of the sparsity of the A matrix.
@c @item LSODE
@c         the variable step-size method that comes with Octave (@pxref{Octave}).
@end itemize

@menu
* Euler integration::           
* Implicit integration::        
@end menu

@node Euler integration, Implicit integration, Simulation parameters, Simulation parameters
@comment  node-name,  next,  previous,  up
@subsection Euler integration
@cindex Euler integration
Euler integration approximates the solution of the Ordinary Differential Equation 
@example
dx/dt = f(x,u)
@end example
by
@example
x := x + f(x,u)*DDT
@end example
where
@example
DDT = DT/STEPFACTOR
@end example
If the system is linear, stability is ensured if the integer STEPFACTOR
is chosen to be greater than the real number
@example
(maximum eigenvalue of -A)*DT/2
@end example
where A is the nxn matrix appearing in
@example
f(x,u) = Ax + Bu
@end example
If the system is non linear, the linearised system matrix A should act
as a guide to the choice of STEPFACTOR.

@node Implicit integration,  , Euler integration, Simulation parameters
@comment  node-name,  next,  previous,  up
@subsection Implicit integration
@cindex Implicit integration
Implicit integration approximates the solution of the Ordinary Differential Equation 
@example
dx/dt = f(x,u)
@end example
by
@example
(I-A*DT)x := (I-A*DT)x + f(x,u)DT
@end example
where A is the linearised system matrix. This implies the solution of N
(=number of states) linear equations at each sample interval. The OCTAVE
version used the `\' operator to solve the set of linear equations, the
C version uses LU decomposition.

If the system is linear, stability is ensured unconditionaly. If the
system is non-linear, then the method still works well.

This method is nice in that choice of DT trades of accuracy against
computation time without compromising stability. In addition, the
correct stready-state values are achieved.

This approach can also be used for constrained state equations of the
form:
@example
E(x) dx/dt = f(x,u)
@end example
where E(x) is a state-dependent matrix. The approximate solution is then
given by:
@example
(E(x)-A*DT)x := (E(x)-A*DT)x + f(x,u)DT
@end example
which reduces to the ordinary differential equation case when E(x)=I.

The _smx representation includes the E matrix.

@c @node Sparse implicit integration,  , Implicit integration, Simulation parameters
@c @comment  node-name,  next,  previous,  up
@c @subsection Sparse implicit integration
@c @cindex Sparse implicit integration
@c This is an experimental approach for large (N>50) systems.

@c Implicit integration (@pxref{Implicit integration}) requires the
@c solution of N linear equations at each step. This is an O(N^3) operation
@c which can be time consuming for large (N>50) systems. However, the A
@c matrix (and hence the (I-A*DT) matrix) is often sparse - most elements
@c are zero.

@c This method uses a conjugate-gradient optimisation method to solve the
@c linear equations
@c @example
@c (I-A*DT)x := (I-A*DT)x + f(x,u)DT
@c @end example
@c by recasting them as the minimisation of the quadratic function
@c @example
@c [(I-A*DT)x_new - (I-A*DT)x_old + f(x,u)DT]^2
@c @end example
@c with respect to x_new. This is solved by the conjugate gradient method.
@c MTT generates two representations _smxx.m and _smxtx to compute
@c (I-A*DT)x and (I-A*DT)'x respectively making full use of the sparsity of
@c the (I-A*DT) matrices to speed up the minimisation procedure.

@c A fixed number of iterations (STEPFACTOR) are used in each optimisation
@c to give a fixed simulation time. This must be chosen by the user, but
@c between 5N and 10N seems ok. Note that the initial value of the
@c optimisation is x_old.

@node Simulation input, Simulation logic, Simulation parameters, Simulation
@comment  node-name,  next,  previous,  up
@section Simulation input
@cindex Simulation input
This is defined in the system_input.txt file. A default file is created
automatically by @strong{MTT}. This is done explicitly by
@example
mtt system input txt
@end example
If the file already exists, the same command checks that all inputs are
defined and that all defined inputs exist in the system and promts the
user to correct discrepancies.

Inputs are defined by the full system name appearing in the structure
file (@pxref{Structure (struc)}). They can depend on states (again defined by
name), time (defined by t) and parameters

For example:
@example
system_pump_l_1_u	= 4e5*atm;
system_pump_r_1_u	= 4e5*(t<10)*atm;
system_ss_i	        = 0*kg;
system_ss_o	        = 3e-3*kg;
system_v_1_u	        = (t>10);
system_v_ll_1_u         = 1;
system_v_lr_1_u         = (t<10);
system_v_ul_1_u         = 0;
system_v_ur_1_u         = (t>10);
@end example

@node Simulation logic, Simulation initial state, Simulation input, Simulation
@comment  node-name,  next,  previous,  up
@section Simulation logic
@cindex Simulation logic
This is defined in the system_logic.txt file. A default file is created
automatically by @strong{MTT}. This is done explicitly by
@example
mtt system logic txt
@end example
If the file already exists, the same command checks that the logic
corresponding to all switch states (@pxref{Switched systems}) are
defined and that all defined logic exists in the system and promts the
user to correct discrepancies.

Logical inputs are defined by the full system name corresponding to
MTT_switch components appearing in the structure file (@pxref{Structure
(struc)}) @emph{with `_logic' appended}. They can depend on states (again defined by name), time
(defined by t) and parameters

For example:
@example
bounce_ground_1_mtt_switch_logic	= bounce_intf_1_mtt3<0;
@end example

@node Simulation initial state, Simulation output, Simulation logic, Simulation
@comment  node-name,  next,  previous,  up
@section Simulation initial state
@cindex Simulation initial state
This is defined in the system_state.txt file. A default file is created
automatically by @strong{MTT}. This is done explicitly by
@example
mtt system state txt
@end example
If the file already exists, the same command checks that all states are
defined and that all defined states exist in the system and prompts the
user to correct discrepancies.

States are defined by the full system name appearing in the structure
file (@pxref{Structure (struc)}). They can depend on parameters.
For example
@example
system_c_l	= (1e4/k_l)/kg;
system_c_ll	= (1e4/k_s)/kg;
system_c_lr	= (1e4/k_s)/kg;
system_c_u	= (1e4/k_l)/kg;
@end example


@c  The initial state of a simulation of is set in the @code{state}
@c  representation with the language @code{txt}.

@c  As usual, @strong{MTT} defaults this for you. There are two
@c  possibilities
@c  @itemize @bullet
@c  @item
@c  The -ss switch is not present: the states default to zero
@c  @item
@c  The -ss switch is present: the states default to those set in the
@c  sspar.r file.
@c  @end itemize

@node Simulation output,  , Simulation initial state, Simulation
@comment  node-name,  next,  previous,  up
@section Simulation output
@cindex Simulation output
The view (@pxref{Views}) representation provides a graphical
representation of the results of a simulation; the postscript language
provides the same thing in a form that can be included in a document.

These are two simulation output representations
@ftable @code
@item odes 
        ordinary differential equation solution (states)
@item odeso
         ordinary differential equation solution (output)
@end ftable    

Particular output variables can be selected by adding a fourth argument
in one of 2 forms
@ftable @code
@item 'name1;name2;..;namen' 
        plot the variables with names na1 .. namen against time
@item 'name1:name2'
                plot the variable with  name2 against that with name 1
@end ftable    

An example of plotting a single variable against time is:
@example
mtt -o -c -ss OttoCycle odeso ps 'OttoCycle_cycle_V'
@end example
An example of plotting one variable against another is:
@example
mtt -o -c -ss OttoCycle odeso ps 'OttoCycle_cycle_V:OttoCycle_cycle_P'
@end example

@c      node   next  prev  up
@node   Sensitivity models, Representations, Simulation, Top
@chapter Sensitivity models
@cindex Sensitivity models
@pindex Sensitivity models

The sensitivity model of a system is a set of equations giving the
sensitivity of the system outputs with respect to system parameters.
@strong{MTT} has built in methods for assisting with the development of
such models.

This feature is experimental at the moment, but the following example
gives an idea of what can be achieved.
@example
mtt copy rc
cd rc
mtt -s src ode view
mtt -s src odeso view
@end example
The sensitivity system src is automatically created from the system rc
using the predefined sR and sC components together with vector junctions
(@pxref{Vector components}).  The four outputs are the two system
outputs plus the two sensitivity functions.

An alternative route is to create the sensitivity functions by symbolic
differentiation.
The following sensitivity representations are available:
@ftable @code
@item   scse
        sensitivity constrained-state equations
@item   sm
        sensitivity state matrices
@item   scsm
        sensitivity constrained-state matrices
@end ftable



@c      node   next  prev  up
@node   Representations, Extending MTT, Sensitivity models, Top
@chapter Representations
@cindex Representations
@pindex Representations
@cindex Defining representations
@cindex Representations, defining

As discussed in @ref{What is a Representation?}, a system has many
representations. The purpose of @strong{MTT} is to provide an easy way to
generate such representation by applying the appropriate sequence of 
transformations. The representations supported by @strong{MTT} are
summarised in @ref{Representation summary}.

There is a two-fold division of representations into those with which the user
defines the system and its various attributes, and those which are
derived from these. The @emph{defining representations} are listed in
@ref{Defining representations}. 

Each representation is implemented in one or more languages depending on
its use. These languages are discussed in @ref{Languages} and are
associated with appropriate tools for modifying or viewing the
representations. 

@menu
* Representation summary::      
* Defining representations::    
* Verbal description (desc)::   
* Acausal bond graph (abg)::    
* Stripped acausal bond graph (sabg)::  
* Labels (lbl)::                
* Description (desc)::          
* Structure (struc)::           
* Constitutive Relationship (cr)::  
* Parameters::                  
* Causal bond graph (cbg)::     
* Elementary system equations::  
* Differential-Algebraic Equations::  
* Constrained-state Equations::  
* Ordinary Differential Equations::  
* Descriptor matrices::         
* Report::                      
@end menu

@node Representation summary, Defining representations, Representations, Representations
@comment  node-name,  next,  previous,  up
@section Representation summary
@cindex Representation summary

Some of the the representations 
available in @strong{MTT} are (in alphabetical order):
@ftable @code
@item   abg
        acausal bond graph 
@item   cbg
        causal bond graph 
@item   cr
        constitutive relationship for each subsystem 
@item   cse
        constrained-state equations 
@item   csm
        constrained-state matrices 
@item   dae
        differential-algebraic equations 
@item   daes
        dae solution - state 
@item   daeso
        dae solution - output 
@item   def
        definitions - system orders etc. 
@item   desc
        Verbal description of system 
@item   dm
        descriptor matrices 
@item   ese
        elementary system equations 
@item   fr
        frequency response 
@item   input        
        numerical input declaration 
@item   ir
        impulse response - state 
@item   iro
        impulse response - output 
@item   lbl
        label file 
@item   lmfr
        loglog modulus frequency response 
@item   lpfr
        semilog phase frequency response 
@item   nifr
        Nichols style frequency response 
@item   numpar
        numerical parameter declaration 
@item   nyfr
        Nyquist style frequency response 
@item   obs
        observer equations for CGPC 
@item   ode
        ordinary differential equations 
@item   odes
        ode solution - state 
@item   odes
        ODE simulation header file 
@item   odeso
        ode solution - output 
@item   odess
        ode numerical steady-states - states 
@item   odesso
        ode numerical steady-states - outputs 
@item   rbg
        raw bond graph 
@item   rep
        report 
@item   rfe
        robot-form equations 
@item   sabg
        stripped acausal bond graph 
@item   simp
        simplification information 
@item   sm
        state matrices 
@item   smx
        state matrices containing explicit states and inputs
@item   sms
        ode 
@item   smss
        SM simulation header file 
@item   sr
        step response - state 
@item   sro
        step response - output 
@item   ss
        steady-state equations 
@item   sspar
        steady-state definition 
@item   struc
        structure - list of inputs, outputs and states 
@item   sub
        Executable subsystem list 
@item   sub
        LaTeX subsystem list 
@item   sympar
        symbolic parameters 
@item   tf
        transfer function 
@end ftable
A complete list can be found via the @code{help representations} command
(@pxref{help representations}). 

Many of these representations have more than one language (@pxref{Representations}) associated
with them.

Some of these representations define the system (@pxref{Defining
representations}).

@node Defining representations, Verbal description (desc), Representation summary, Representations
@comment  node-name,  next,  previous,  up
@section Defining representations
@cindex Defining representations

The following representations define the system and therefore must,
ultimately, be defined by the user. However, all of these are assigned
default values by @strong{MTT} and may then be subsequently edited
(@pxref{Text editors}) viewed or operated on by the appropriate tools
(@pxref{Language tools}).
@vtable @code
@item system_abg.fig
        the acausal bond graph (@pxref{Acausal bond graph (abg)})
@item system_lbl.txt
        the label file (@pxref{Labels (lbl)})
@item system_desc.tex
        the description file (@pxref{Description (desc)})
@item system_simp.r
        algebraic simplifications to make output more readable
        (@pxref{Symbolic parameters for simplification (simp.r)})
@item system_subs.r
        algebraic substitutions to resolve, eq trig. identities
        (@pxref{Symbolic parameters (subs.r)})
@item system_simpar.txt
        simulation parameters (@pxref{Simulation parameters})
@item system_numpar.txt
        numerical parameters (@pxref{Numeric parameters (numpar)})
@item system_input.txt
        the system input for simulations (@pxref{Simulation input})
@item system_logic.txt
        the  switching logic for simulations (@pxref{Simulation logic})
@item system_sspar.r
        defines the system steady-state (@pxref{Steady-state solutions - symbolic (ss)})
@end vtable

@node Verbal description (desc), Acausal bond graph (abg), Defining representations, Representations
@comment  node-name,  next,  previous,  up
@section Verbal description (desc)
@cindex Verbal description (desc)

Systems can be documented in LaTeX using the _desc.tex file. This file
is included in the report (@pxref{Report}) if the abg tex option
is included in the rep.txt file.  As usual, @strong{MTT} provides a
default text file to be edited by the user (@pxref{Text editors}).


@c      node   next  prev  up
@node   Acausal bond graph (abg), Stripped acausal bond graph (sabg), Verbal description (desc), Representations
@section Acausal bond graph (abg)
@cindex Acausal bond graph (abg)
@pindex Acausal bond graph (abg)

The acausal bond graph is the main input to @strong{MTT}. It is up to you, as a
system modeler, to distill the essential aspects of the system that you
wish to model and capture this information in the form of a bond graph.

The inexperienced modeler may wish to look in one of the standard
textbooks and copy some bond graphs of  systems to get going.


To create the acausal bond graph of system `sys' in language fig type:
@example
mtt sys abg fig
@end example
To create the acausal bond graph of system `sys' in language m type:
@example
mtt sys abg m
@end example
To view the acausal bond graph of system `sys' type:
@example
mtt sys abg view
@end example

@menu
* Language fig (abg.fig)::      
* Language m (rbg.m)::          
* Language m (abg.m)::          
* Language tex (abg.tex)::      
@end menu

@node Language fig (abg.fig), Language m (rbg.m), Acausal bond graph (abg), Acausal bond graph (abg)
@subsection Language fig (abg.fig) 
@cindex Language fig (abg.fig) 
@pindex Language fig (abg.fig) 

A bond graph is made up of:
@ftable @code
@item bonds
        To connect components together.
@item strokes
        To indicate causality.
@item components
        Either simple or compound.
@item artwork
        Irrelevant to the system but useful to the user.
@end ftable

An icon library of bonds, components and other symbols is available
within xfig (@pxref{icon library}).




@menu
* icon library::                
* bonds::                       
* strokes::                     
* components::                  
* Simple components::           
* SS components::               
* Simple components - implementation::  
* Compound components::         
* Named SS components::         
* Coerced bond direction::      
* Port labels::                 
* Vector port labels::          
* Port label defaults::         
* Vector components::           
* artwork::                     
* Valid names::                 
@end menu

@node icon library, bonds, Language fig (abg.fig), Language fig (abg.fig)
@subsubsection Icon library
@cindex Icon
@cindex library
A number of predefined iconic symbols are available within xfig. 
@example
Click onto the library icon
Click onto the library pull-down menu and select BondGraph
Select iconic symbols from the presented list
@end example

@node bonds, strokes, icon library, Language fig (abg.fig)
@subsubsection Bonds
@cindex bonds
@pindex bonds

Bonds are represented by polylines with two segments. They must be the
default style (i.e. plain not dashed or dotted). The shortest segment is
taken to be the half-arrow. its positioning is significant because:
@itemize @bullet
@item
It points in the direction of power flow; thus a bond normally points
towards C, I and R components.
@item
the corresponding side of the bond indicates flow causality; the other
side represents effort causality. This is significant when using casual
half-strokes (@pxref{strokes}). Please adopt the convention of having
the half-arrows below horizontal bonds and to the right of vertical bonds.
@end itemize



@c      node   next  prev  up
@node strokes, components, bonds, Language fig (abg.fig)
@subsubsection Strokes
@cindex strokes
@pindex strokes

Causal strokes are represented by single-segment polylines.
There are two sorts of strokes:
@itemize @bullet
@item
@emph{Full} strokes: these are the usual bond-graph strokes and determine
both the effort and flow causality in the usual way. The @emph{centre} of the
stroke should be at about one end of the bond and be at right angles to
it.
@item
@emph{Half} strokes: these are an innovation in @strong{MTT} and allow you to
specify the effort and flow causality independently. The @emph{end} of the
stroke should be at about one end of the bond and be at right angles to
it. If the causal half-stroke is on the @emph{same} side as the half-arrow
(@pxref{bonds}) then it determines @emph{flow} causality; if, on the other
hand, it is on the @emph{opposite} side to the half-arrow
(@pxref{bonds}) then it determines @emph{effort} causality.
Two half strokes on the @emph{same}, but on @emph{opposite} sides of the
bond are equivalent to a a full stroke at the same end of the bond.
@end itemize

@strong{MTT} is reasonably forgiving; but a neat diagram will be less ambiguous to
you as well as to @strong{MTT}.

Causality is indicated as follows:
@itemize @bullet
@item 
@emph{Effort} is imposed at the @emph{same} end as the stroke.
@item 
@emph{Flow} is imposed at the @emph{opposite} end as the stroke.
@end itemize



@c      node   next  prev  up
@node components, Simple components, strokes, Language fig (abg.fig)
@subsubsection Components
@cindex components
@pindex components

Components are represented by a text string in fig.  The recommended
style is: 20pt, Times-Roman and centre justified.

The component text string can be of the following forms:
@ftable @code
@item type
Just the type of the component is indicated. Components may be either
Simple components (@pxref{Simple components}) or Compound components
(@pxref{Compound components}).  For example:
@example
R
@end example
@item type:label
Both the type and the label of the component are given. The type must be
a valid name (@pxref{Valid names}.The name provides a link to more
information to be found in @xref{Labels (lbl)}. For example:
@example
R:r
@end example
@item type*n
The name, together with the number @samp{n} of repetitions of the
component, are given. This repetition only makes sense if the component
has an even number of ports (@pxref{Port labels}); n copies of the component
are concatenated with odd Named ports (@pxref{Port labels}) of the
component being connected to the even Named ports of the previous
component in the chain in numerical order.  This feature is particularly
useful if the component is compound and can be used for, example to give
a lumped approximation of a distributed system. For example:
@example
MySystem*25
@end example
@item type:label*n
This complete form and is a combination of the simpler forms. For
example:
@example
MySystem:MyLabel*25
@end example

@end ftable

@node Simple components, SS components, components, Language fig (abg.fig)
@comment  node-name,  next,  previous,  up
@subsubsection Simple components
@cindex Simple components

The following simple components are defined in MTT.

@ftable @code
@item R
         Standard one-port R
@item C
         Standard one-port I
@item I
         Standard one-port I
@item SS
        Source-sensor
@item TF
        Transformer
@item GY
        Gyrator
@item AE
        Effort amplifier
@item AF
        Flow amplifier
@item CSW
         Switched one-port I
@item ISW
         Switched one-port I
@end ftable

@menu
* SS components::               
* Simple components - implementation::  
@end menu

@node SS components, Simple components - implementation, Simple components, Language fig (abg.fig)
@comment  node-name,  next,  previous,  up
@subsubsection SS components
@cindex SS components

@iftex
$$

@end iftex


@code{SS} components provide input and output variables for a system;
Named SS components (@pxref{Named SS components}) provide this for
subsystems.

@node Simple components - implementation, Compound components, SS components, Language fig (abg.fig)
@comment  node-name,  next,  previous,  up
@subsubsection Simple components - implementation
@cindex  Simple components - implementation

Each simple component, with name NAME, is defined by two m files:
@ftable @code
@item NAME_cause.m
        defines the possible causal patterns for the component
@item NAME_eqn.m
        defines the equations generated 
@end ftable
Only the experienced user would normally define simple components -
Compound components (@pxref{Compound components}) are recommended for
DIY components.

@node Compound components, Named SS components, Simple components - implementation, Language fig (abg.fig)
@comment  node-name,  next,  previous,  up
@subsubsection Compound components
@cindex  Compound components
@cindex Named SS
Compound components are systems described by bond graphs and implemented
by MTT. They have special SS components, Named SS components
(@pxref{Named SS components}), to indicate connections to the
encapsulating system.

Like any other system, they are described by a graphical Bond Graph description
(@pxref{Language fig (abg.fig) }), and a label file (@pxref{Labels (lbl)}).

By convention, all of the files describing a component live in a
directory with the same name as the component.

@menu
* Named SS components::      
@end menu

@node Named SS components, Coerced bond direction, Compound components, Language fig (abg.fig)
@comment  node-name,  next,  previous,  up
@subsubsection Named SS components
@cindex Named SS components

Named SS components provide the link from the system which @emph{defines} 
compound component to the system which @emph{uses} a compound
component @pxref{Compound components}.
A named SS components is of the form
@code{SS:[name]};

Where `name' is a name consisting of alphanumeric characters and
underscore; for example:
@example
SS:[Mechanical_1]
@end example
Each such named SS provides one of the ports
(@pxref{Ports}).
The direction of the named SS components.
(@pxref{Named SS components}) 
is coerced (@pxref{Coerced bond direction}) to have the same direction
as the bond connected to the corresponding port. Thus the direction of
the  direction of the named SS components has no significance unless the
component is at the top level of a system.

If a named SS component exists at the top level (@pxref{Top level})
and is treated as an
ordinary SS component with the given direction and with the attributes
specified in the label file (@pxref{Labels (lbl)}).

@node Coerced bond direction, Port labels, Named SS components, Language fig (abg.fig)
@comment  node-name,  next,  previous,  up
@subsubsection Coerced bond direction
@cindex Coerced bond direction
@pindex Coerced bond direction
Named SS components (@pxref{Named SS components}) provide the mechanism
for declaring the ports (@pxref{Ports}) of a component. The
corresponding bond has a direction. However, under some circumstances,
it may be useful to reverse this direction. @strong{MTT} provides a
coercion mechanism for this: the the direction of the bond attached to
the named SS component (@pxref{Named SS components}) is replaced by the
direction of the bond attached to the component port.

@node Port labels, Vector port labels, Coerced bond direction, Language fig (abg.fig)
@comment  node-name,  next,  previous,  up
@subsubsection Port labels
@cindex ports
@pindex ports
Most multi-port components have ports 
@pxref{Ports})which display different
behaviors; the exception to this is the junction (@code{0} and @code{1})
components. For this reason, @strong{MTT} provides a method for unambiguously
identifying the ports of a multi-port component by port labels.

A port label is indicated by a name within parentheses of the form
@code{[name]}, where `name' is a name consisting of alphanumeric
characters and underscore; for example:
@example
[Mechanical_1]
@end example
This provides a label for corresponding to the component to which the
nearest bond-end is attached.

The following rules must be be obeyed:
@itemize @bullet
@item
If a component has any port labels at all, there must be one for each
port of the component.
@c @item
@c If a component is to be used repetitively (see @ref{components}), it
@c must have an even number of ports and the odd ports are connected to the
@c even points within the chain of components.
@end itemize

Port labels may be grouped into vector port labels (@pxref{Vector port
labels}). Components with compatible (ie containing the same number of ports)
vector ports may be connected by a @emph{single} bond
(@pxref{Bonds}); such a bond implies the corresponding number of bonds
(one for each element of the vector port label). All such bonds inherit
the same direction and any @emph{explicit} causal strokes (@pxref{strokes})

@node Vector port labels, Port label defaults, Port labels, Language fig (abg.fig)
@comment  node-name,  next,  previous,  up
@subsubsection Vector port labels
@cindex vector port labels
@cindex port labels
Port labels (@pxref{Port labels}) may be grouped into vector port
labels of the form @code{[name1,name2,name3]}. 
@example
[Mechanical_1,Electrical,Hydraulic_5]
@end example

@node Port label defaults, Vector components, Vector port labels, Language fig (abg.fig)
@comment  node-name,  next,  previous,  up
@subsubsection Port label defaults
@cindex Port label defaults
@pindex Port label defaults
Whether impicitly or explicity, all ports of components (with the
exception of 0 and 1 junctions) must have lables  (@pxref{Port
labels}). However, these can be omitted from the bond graph in the
following circumstances and default labels are supplied by @strong{MTT}.
@enumerate
@item A single unlabled inport defaults to [in]
@item A single unlabled outport defaults to [out]
@end enumerate

These defaults may, in turn be aliases (@pxref{Aliases}) for port labels
(@pxref{Port labels}) or vector port labels (@pxref{Vector port
labels}).  Combining the default and alias mechanism is a powerful tool
for creating uncluttered, yet complex, bond graph models.

@node Vector components, artwork, Port label defaults, Language fig (abg.fig)
@subsubsection Vector Components
@cindex Vector components
@pindex Vector components
Vectors of components can be created in four cases:
@code{0} junctions,
@code{1} junctions,
@code{SS} components and
@code{SS} port components.


In each case, the presence of a vector component is indicated by a
single port label  (@pxref{Port labels}) containing numerals from 1 to
the order of the vector. Thus a vector of 3 component is indicated by a
port label of the form [1,2,3].

Within the corresponding label file (@pxref{Labels (lbl)}), the
components of a vector port can be accessed using _i where i is the
corresponding index. Thus a port SS:[Electrical] appearing near the port
label  [1,2,3] could contain the port alias (@pxref{Port aliases})
@example
%ALIAS  in Electrical_1,Electrical_2,Electrical_3
@end example

@node artwork, Valid names, Vector components, Language fig (abg.fig)
@subsubsection Artwork
@cindex artwork
@pindex artwork
You are encouraged to annotate your bond graphs extensively - this makes
them an immediately readable document whilst retaining the precise and
unambiguous expressive power of the bond graph.

You may add any Fig (@pxref{Fig}) object to the bond graph as long as it
will not be interpreted as part of the bond graph.  
The reccommended way to acheive this is to put the  Bond Graph at depth
0,10,20 etc (ie depth modulo 10 is zero) and artwork at any other depth. 
@c  The recommended way to do this is to @emph{put all artwork at or below
@c  Depth 1} in the figure. @strong{MTT} ignores all objects not at depth 0.


For compatibility with earlier versions of @strong{MTT}, the following
objects are ignored even at level 0. However, their use is strongly
discouraged.
@itemize @bullet
@item
Adding text is OK as long as it cannot be confused with components
(@pxref{components}). In particular, you can include invalid component
characters such as white space, @code{"}, @code{'}, @code{!} etc.
@item
Adding boxes, arcs etc is always OK.
@item
Adding dotted or dashes lines is always OK.
@end itemize

The stripped abg file (sabg) (@pxref{Stripped acausal bond graph
(sabg)})
shows only those parts of the diagram recognised by @strong{MTT} and is
therefore useful for distinguishing artwork.
 
@node Valid names,  , artwork, Language fig (abg.fig)
@subsubsection Valid Names
@cindex valid name
@pindex valid name
A valid name is a text string containing alphanumeric characters.  It
must @strong{NOT} contain underscore @samp{_}, hyphen @samp{-}, @samp{:}
or @samp{*}.



@node Language m (rbg.m), Language m (abg.m), Language fig (abg.fig), Acausal bond graph (abg)
@comment  node-name,  next,  previous,  up
@subsection Language m (rbg.m)
The raw bond graph of system `sys' is represented as
 an m file with heading:
@example
function [rbonds, rstrokes,rcomponents,rports,n_ports] = sys_rbg
@end example
This representation is a half-way house between the fig 
(@pxref{Language fig (abg.fig)}) and m 
(@pxref{Language m (abg.m)}) representations. It contains the
geometric information from the fig file in a form digestible by Octave
(@pxref{Octave}).

The five outputs of this function are:
@itemize @bullet
@item
rbonds
@item
rstrokes
@item
rcomponents
@item
rports
@item
n_ports
@end itemize

@emph{rbonds} is  a matrix with
@itemize @bullet
@item
one row for each bond (@pxref{bonds})
@item
columns 1 and 2 containing the x,y coordinates for one end of the bond
@item
columns 3 and 4 containing the x,y coordinates for the corner of the bond
@item
columns 5 and 6 containing the x,y coordinates for the other end of the bond
@end itemize

@emph{rstrokes} is  a matrix with (@pxref{strokes})
@itemize @bullet
@item
one row for each stroke or half-stroke
@item
columns 1 and 2 containing the x,y coordinates for one end of the stroke
@item
columns 3 and 4 containing the x,y coordinates for the other end of the stroke
@end itemize

@emph{rcomponents} is  a matrix with (@pxref{components})
@itemize @bullet
@item
one row for each component
@item
columns 1 and 2 containing the x,y coordinates of the component
@item
the remaining columns containing fig file information
@end itemize

@emph{rports} is  a matrix with (@pxref{Port labels})
@itemize @bullet
@item
one row for each component port that is explicitly labeled
@item
columns 1 and 2 containing the x,y coordinates of the port label
@item
column 3 contains the port number.
@end itemize

@emph{n_ports} is the number of ports associated with the system -- i.e. the
number of Named SS components (@pxref{Named SS components}).

@menu
* Transformation abg2rbg_fig2m::  
@end menu

@node Transformation abg2rbg_fig2m,  , Language m (rbg.m), Language m (rbg.m)
@comment  node-name,  next,  previous,  up
@subsubsection Transformation abg2rbg_fig2m
@cindex Transformation abg2rbg_fig2m

This transformation takes the acausal bond graph as a fig file 
(@pxref{Language fig (abg.fig)}) and transforms it into a raw bond graph in
m-file format (@pxref{Language m (rbg.m)}).

This transformation is implemented in GNU awk (gawk).
It scans both the fig file (@pxref{Language fig (abg.fig)})
and the label file (@pxref{Labels (lbl)}) and generates the rbg
 (@pxref{Language m (rbg.m)}) with components sorted according to the
label file.
It also generates a file sys_fig.fig containing details of the bond
graph with the components removed.

@node Language m (abg.m), Language tex (abg.tex), Language m (rbg.m), Acausal bond graph (abg)
@comment  node-name,  next,  previous,  up
@subsection Language m (abg.m)
@cindex Language m (abg.m) 
@cindex bonds
@cindex components
@cindex n_ports

The acausal bond graph of system `sys' is represented as
 an m file with heading:
@example
function [bonds,components,n_ports] = sys_abg
@end example
The three outputs of this function are:
@itemize @bullet
@item
bonds
@item
components
@item
n_ports
@end itemize

@emph{bonds} is  a matrix with
@itemize @bullet
@item
one row for each bond
@item
the first column contains the arrow-orientated 
(@pxref{Arrow-orientated causality}) 
causality of the @emph{effort} variable.
@item
the second column contains the arrow-orientated 
(@pxref{Arrow-orientated causality}) 
causality of the @emph{flow} variable.
@end itemize

@emph{components} is  a matrix with
@itemize @bullet
@item
one row for each component
@item
one column for each bond impinging on the component. The
@emph{magnitude} of each entry corresponds to the bond number (the
appropriate row index of` bonds'); the sign is positive if the bond
arrow points into the component and negative otherwise.
@end itemize

@emph{n_ports} is the number of ports associated with the system -- i.e. the
number of Named SS components (@pxref{Named SS components}).

@menu
* Arrow-orientated causality::  
* Component-orientated causality::  
* Transformation rbg2abg_m::    
@end menu

@node  Arrow-orientated causality, Component-orientated causality, Language m (abg.m), Language m (abg.m)
@comment  node-name,  next,  previous,  up
@subsubsection  Arrow-orientated causality
@cindex Arrow-orientated causality

The  arrow-orientated causality convention assigns -1, 0 or 1 
to both the effort and flow (@pxref{Variables}) sides of a bond 
to represent the causal stroke (@pxref{strokes})
as follows:
@vtable @code
@item 0
        if there is no causality set.
@item 1
       if the causal stroke is at the arrow end of the bond.
@item -1 
     if the causal stroke is at the other end of the bond.
@end vtable
@pxref{Component-orientated causality}.

@node  Component-orientated causality, Transformation rbg2abg_m, Arrow-orientated causality, Language m (abg.m)
@comment  node-name,  next,  previous,  up
@subsubsection  Component-orientated causality
@cindex Component-orientated causality

The  component-orientated causality convention assigns -1, 0 or 1 
to both the effort and flow (@pxref{Variables}) sides of a bond 
to represent the causal stroke (@pxref{strokes})
as follows:
@vtable @code
@item 0
        if there is no causality set.
@item 1 
      if the causal stroke is at the component end of the bond.
@item -1
      if the causal stroke is at the other end of the bond.

@end vtable
@pxref{Arrow-orientated causality}.

@node Transformation rbg2abg_m,  , Component-orientated causality, Language m (abg.m)
@comment  node-name,  next,  previous,  up
@subsubsection Transformation rbg2abg_m
@cindex Transformation rbg2abg_m
This transformation takes the raw bond graph and, by doing some
geometrical computation, determines the topology of the bond graph -- ie
what is close to what.

@node Language tex (abg.tex),  , Language m (abg.m), Acausal bond graph (abg)
@comment  node-name,  next,  previous,  up
@subsection Language tex (abg.tex)
@cindex Language tex (abg.tex)

For the purpose of producing a report (@pxref{Report}), @strong{MTT}
generates a LaTeX (@pxref{LaTeX}) file describing the bond graph and its
subsystems. Additional information may be supplied using the description
representation (@pxref{Description (desc)}).

@c      node   next  prev  up
@node   Stripped acausal bond graph (sabg), Labels (lbl), Acausal bond graph (abg), Representations
@section Stripped acausal bond graph (sabg)
@cindex Stripped acausal bond graph (sabg)
@pindex Stripped acausal bond graph (sabg)
The stripped acausal bond graph is the acausal bond graph representation
(@pxref{Acausal bond graph (abg)}) without the artwork
(@pxref{artwork}). It is useful to check for mistakes by showing
precisely what is recognised by @strong{MTT}.

@menu
* Language fig (sabg.fig)::     
* Stripped acausal bond graph (view)::  
@end menu

@node Language fig (sabg.fig), Stripped acausal bond graph (view), Stripped acausal bond graph (sabg), Stripped acausal bond graph (sabg)
@subsection Language fig (sabg.fig) 
@cindex Language fig (sabg.fig) 
@pindex Language fig (sabg.fig) 
The stripped acausal bond graph can be generated as a fig (@pxref{Fig})
file using
@example
mtt syst sabg fig
@end example

@node Stripped acausal bond graph (view),  , Language fig (sabg.fig), Stripped acausal bond graph (sabg)
@subsection Stripped acausal bond graph (view)
@cindex Language m (view)
@cindex view  Constrained-state Equations
This representation has the standard text view
(@pxref{Views}).


@node Labels (lbl), Description (desc), Stripped acausal bond graph (sabg), Representations
@comment  node-name,  next,  previous,  up
@section Labels (lbl)
@cindex Labels
@cindex lbl
Bond graph components have optional labels. These provide pointers to
further information relating to the component; this avoids clutter on
the bond graph.

The label file contains the following non-blank lines (blank lines are ignored)
@itemize @bullet
@item Summary - lines beginning with %SUMMARY
@item Description - lines beginning with %DESCRIPTION
@item Alias - lines beginning with %ALIAS
@item Comments - lines beginning with % 
@item Labels - other non-blank lines
@end itemize

Each lable contains three fields (in the following order) separated by
white space and on one line:
@enumerate
@item The component name @pxref{Component names}. This must be a valid
name  (@pxref{Valid names}.
@item The component constitutive relationship @pxref{Component constitutive relationship}
@item The component arguments @pxref{Component arguments}
@end enumerate

Not each component @pxref{components} needs a label, only those which are explicitly
labeled on the Bond Graph @pxref{Acausal bond graph (abg)}.
@strong{MTT} checks whether all  components labelled on the bond graph
have labels and vice versa.

If no lbl file exists, @strong{MTT} will create a valid one for you. If
wish to create one to edit yourself, type
@example
mtt system_name lbl txt
@end example
An example lbl file (for the RC system is):
@example
%% Label file for system RC (RC_lbl.txt)
%SUMMARY RC
%DESCRIPTION <Detailed description here>
% Port aliases
%ALIAS  in      in
%ALIAS  out     out

% Argument aliases
%ALIAS  $1      c
%ALIAS  $2      r

%% Each line should be of one of the following forms:
%            a comment (ie starting with %)
%            component-name     cr_name arg1,arg2,..argn
%            blank

% ---- Component labels ----

% Component type C
        c               lin     effort,c

% Component type R
        r               lin     flow,r

% Component type SS
        [in]    SS              external,external
        [out]   SS              external,external

@end example


The old-style lbl files (@pxref{Old-style labels (lbl)}) are NO LONGER
supported -- you are encouraged to convert them ASAP.
@menu
* SS component labels ::        
* Other component labels ::     
* Component names::             
* Component constitutive relationship::  
* Component arguments::         
* Parameter declarations::      
* Units declarations::          
* Aliases::                     
* Parameter passing::           
* Old-style labels (lbl)::      
@end menu

@node SS component labels , Other component labels , Labels (lbl), Labels (lbl)
@comment  node-name,  next,  previous,  up
@subsection SS component labels 
@cindex SS component labels 
In addition to the label there are two information fields, @pxref{Labels
(lbl)}. The first must be `SS', the second contains two information
fields of the form info_field_1,info_field_2.

These two information
fields correspond to the effort and flow variables of the of the SS components as follows
@vtable @code
@item info_field_1
        effort
@item info_field_2
        flow
@end vtable
Each of these two fields contains one of the following @emph{attributes}:
@vtable @code
@item external
        indicates that the corresponding variable is a system input or
output
@item internal
        indicates that the variable does not appear as a system output;
        it is an error to label an input in this way.
@item a number
        the value of the input; or the value of the (imposed) output
@item a symbol
        the symbolic value of the input; or the value of the (imposed) output
@item unknown
        used for the SS method of solving algebraic loops. This
        indicates that the corresponding system input (SS output) is to
        be chosen to set the corresponding system output (SS input) to zero.
@item zero
        used for the SS method of solving algebraic loops. This
        indicates that the corresponding system output (SS input) is to
        be set to zero using the variable indicted by the corresponding
        `unknown' label.
@end vtable

Some examples are:
@example
%% ss1 is both a source and sensor
ss1     SS              external,external
%% ss1 acts as a flow sensor - it imposes zero effort.
ss2     SS              0,external
@end example


@node Other component labels , Component names, SS component labels , Labels (lbl)
@comment  node-name,  next,  previous,  up
@subsection Other component labels 
@cindex Other component labels 

In addition to the label there are two information fields,
@pxref{Labels (lbl)}.
They correspond to the constitutive relationship 
(see @pxref{Constitutive relationship} and arguments of the
component as follows
@vtable @code
@item info_field_1
        constitutive relationship 
@item info_field_2
        parameters
@end vtable

Some examples are:
@example
%Armature resistance
r_a     lin     effort,r_a

%Gearbox ratio
n       lin     effort,n
@end example

@strong{MTT} supports parameter-passing to  (@pxref{Parameter passing })
subsystems.

@menu
* Component names::             
* Component constitutive relationship::  
* Component arguments::         
* Aliases::                     
* Parameter passing::           
* Old-style labels (lbl)::      
@end menu

@node Component names, Component constitutive relationship, Other component labels , Labels (lbl)
@comment  node-name,  next,  previous,  up
@subsection Component names
@cindex  Component names
The component name field must contain a valid name  (@pxref{Valid names} corresponding to the
name (the bit after the :) of each named component (@pxref{components})
on  the bond graph (@pxref{Acausal bond graph (abg)}).

@node Component constitutive relationship, Component arguments, Component names, Labels (lbl)
@comment  node-name,  next,  previous,  up
@subsection Component constitutive relationship
@cindex  Component constitutive relationship
The constitutive relationship field contains the name of a constitutive
relationship for the component. There are three sorts of constitutive
relationship recognised by @strong{MTT}:
@enumerate
@item A generic constitutive relationship such as @var{lin} (the generic
linear constitutive relationship.
@item A local constitutive relationship with the same name as the
component type
@item The @var{SS} constitutive relationship reserved for @var{SS}
components.
All labels for @var{SS} components must contain SS in this field.
@end enumerate


@node Component arguments, Parameter declarations, Component constitutive relationship, Labels (lbl)
@comment  node-name,  next,  previous,  up
@subsection Component arguments
@cindex  Component arguments

@node Parameter declarations, Units declarations, Component arguments, Labels (lbl)
@comment  node-name,  next,  previous,  up
@subsection Parameter declarations
@cindex parameter declarations
@pindex parameter declarations
@pindex PAR 
@pindex NOTPAR 
@pindex VAR 
@pindex NOTVAR 

It is sometimes useful to use parameters (in addition to those implied by
the Component arguments @pxref{Component arguments}) to compute values
in, for example the numpar file. These can be declared in the label
file;
for examples , the two parameters par1 and par 2 can be declared as:
@example
#PAR par1
#PAR par2
@end example

On the other hand, some CR arguments (eg foo and bar) may not correspond to
parameters. These can be excluded from the sympar list  using
the NOTPAR declaration
@example
#NOTPAR foo
#NOTPAR bar
@end example

For comapability with old code, VAR may be used in place of PAR, but
this usage is deprecated.

@node Units declarations, Aliases, Parameter declarations, Labels (lbl)
@comment  node-name,  next,  previous,  up
@subsection Units declarations
@cindex units declarations
@pindex units declarations
@pindex UNITS
The units and domains of ports (@pxref{Ports}) are declared as:
@example
#UNITS Port_name domain effort_units flow_units
@end example
where "Port_name" is the name of the port, domain is one of:
@vtable @code
@item electrical
         the electrical domain
@item translational
         the translational mechanical domain
@item rotational
         the rotational mechanical domain
@item fluid
         the fluid domain
@item thermal
         the thermal domain 
@end vtable
and effort_units and flow_units are corresponding units for the effort
and the flow.

Allowed units are those defined in the @strong{units} package.



@strong{MTT} checks that units are 
@itemize  @bullet
@item defined consistently with the domain
@item the same for connected ports when both ports have defined units.
@end itemize
No checks are done if one or both ends of a bond are not connected to a
port with defined units.



@node Aliases, Parameter passing, Units declarations, Labels (lbl)
@comment  node-name,  next,  previous,  up
@subsection Aliases
@cindex aliases
@pindex aliases

Aliases provide a convenient mechanism for relabelling words appearing
in the label file (@pxref{Labels (lbl)}). There are three contexts in
which the alias mechanism is used:

@enumerate
@item renaming ports (@pxref{Port aliases}),
@item renaming parameters (@pxref{Parameter aliases}) and
@item renaming components (@pxref{Component aliases}).
@end enumerate

All three mechanisms use the same form of statement within the label
file
@example
%ALIAS short_label       real_label
@end example

@strong{MTT} distinguishes between the three forms as follows:

@itemize @bullet
@item Parameter aliases: `short_label' starts with a `$'
@item Component aliases: `real_label' contains the directory separator
`/'
@item Port aliases: neither of the above
@end itemize

@menu
* Port aliases::                
* Parameter aliases::           
* Component aliases::           
@end menu


@node Port aliases, Parameter aliases, Aliases, Aliases
@comment  node-name,  next,  previous,  up
@subsubsection Port aliases
@cindex port aliases
@pindex port aliases
Aliases provide a way of refering to (@pxref{Port labels}) or vector port labels (@pxref{Vector
port labels}) on the bond graph using a short-hand notation. With in a
component label file (@pxref{Labels (lbl)}) statements of the following
forms can occur 

@example
%ALIAS short_label       real_label
@end example

When the component is used within another component, the short_lable may
be used in place of the real_label.
More than one alias per label can be used, for example

@example
%ALIAS short_label_1       real_label
%ALIAS short_label_2       real_label
%ALIAS short_label_3       real_label
@end example

The port can then be refered to in four ways: as real_label,
short_label_1, short_label_2 or short_label_3.
An alternative notation for the ALIAS statement in this case is

@example
%ALIAS short_label_1|short_label_2|short_label_3       real_label
@end example

The alias feature is particularly powerful in conjunction with vector
port labels (@pxref{Vector port labels}) and the port label default 
(@pxref{Port label defaults}) mechanisms. For example, a component with
5 ports appearing in the lbl file as:

@example
        [Hydraulic_in]  external        external
        [Hydraulic_out] external        external
        [Power_Shaft]           external        external
        [Thermal_in]    external        external
        [Thermal_out]   external        external
@end example

together with the following statements in the label file:

@example
%ALIAS  in              Thermal_in,Hyydraulic_in
%ALIAS  out             Thermal_out,Hydraulic_out
%ALIAS  shaft|power     Power_Shaft
@end example

can appear in the bond graph containing that component with one bond
labeled either [shaft] or [power] or [Power_Shaft], one unlabeled vector
bond pointing in and one unlabeled vector bond pointing out.

@node Parameter aliases, Component aliases, Port aliases, Aliases
@comment  node-name,  next,  previous,  up
@subsubsection Parameter aliases
@cindex parameter aliases
@pindex parameter aliases

Parameter aliases are of the form
@example
%ALIAS $n       actual parameter
@end example
where n is an integer (unique within the label file).
For example

@example
%ALIAS  $1              c_v
%ALIAS  $2              density,ideal_gas,r
%ALIAS  $3              alpha
%ALIAS  $4              flow,k_p
@end example

Assigns four symbolic parameters to the corresponding strings These four
parameters (@code{$1}--@code{$4}) can then be used for parameter
passing(@pxref{Parameter passing}).

@node Component aliases,  , Parameter aliases, Aliases
@comment  node-name,  next,  previous,  up
@subsubsection Component aliases
@cindex component aliases
@pindex component aliases

Component aliases are of the form
@example
%ALIAS Component_name   Component_location       
@end example

An example appears in the following label file fragment
@example
...
%ALIAS  wPipe   CompressibleFlow/wPipe
%ALIAS  Poly    CompressibleFlow/Poly
....

@end example
The two components `wPipe' and `Poly' are both to be found within the
library `Compressible flow' and the respective subdirectories. This
follows the @strong{MTT} convention that compound components
(@pxref{Compound components}) live within a directory of the same name.
 

@node Parameter passing, Old-style labels (lbl), Aliases, Labels (lbl)
@comment  node-name,  next,  previous,  up
@subsection Parameter passing
@cindex Parameter passing
@strong{MTT} supports parameter-passing to subsystems within label files
(@pxref{Labels (lbl)}). Within a subsystem, explicit constitutive
relationships and parameters (or groups thereof) can be replaced by
postitional parameters such as @code{$1}, @code{$2} etc.  Although this
can be done directly, it is recommended that this is done via the alias
mechanism (@pxref{Parameter aliases}).

In a subsystem
@code{$i}, is replaced by the ith field of a colon @code{;} separated
field in the calling label file. This field may include commas @code{,}
and the four arithmetic operators @code{+}, @code{-}, @code{*} and
@code{/}.

For example, consider the following example label file fragment (associated with a
component called Pump:
@example
...

%ALIAS  $1              c_v
%ALIAS  $2              density,ideal_gas,r
%ALIAS  $3              alpha
%ALIAS  $4              flow,k_p

%ALIAS  wPipe   CompressibleFlow/wPipe
%ALIAS  Poly    CompressibleFlow/Poly

% Component type wPipe
        pipe    none                    c_v;density,ideal_gas,r

% Component type Poly
        poly            Poly            alpha

@end example

The 4 parameters @code{$1}, @code{$2}, @code{$3}, and @code{$4} can be
passed from a higher level component as in the following label file
fragment:

@example
% Component type Pump
        comp            none            c_v;rho,ideal_gas,r;alpha;effort,k_c
        turb            none            c_v;rho,ideal_gas,r;alpha;effort,k_t
@end example

Thus in component `comp':
@itemize @bullet
@item @code{$1} is replaced by c_v
@item @code{$2} is replaced by rho,ideal_gas
@item @code{$3} is replaced by alpha
@item @code{$4} is replaced by effort,k_c
@end itemize
whereas in component `turb' the first three parameters are the same but
@itemize @bullet
@item @code{$4} is replaced by effort,k_t
@end itemize



@node Old-style labels (lbl),  , Parameter passing, Labels (lbl)
@comment  node-name,  next,  previous,  up
@subsection Old-style labels (lbl)
@cindex Old-style labels
@cindex lbl

Old syle labels (mtt version 2.x) are supported by mtt version
3.x. However, you are advised to use the new form (@pxref{Labels
(lbl)}).

Each line of the @code{_label.txt} file is of one of three forms:
@enumerate
@item
Contains three fields (separated by white space) of the form
@example
label   field_1   field_2
@end example
@item
Blank
@item
Preceded by %
@end enumerate
Only the first is noticed by @strong{MTT}; the second and third are for
providing helpful commenting.

The role of the two information fields depends on the component with the
corresponding label. In particular the classes of components are:
@itemize @bullet
@item
SS components, @pxref{SS components}.
@item
Other components,  @pxref{components}.
@end itemize
Named SS component, @pxref{Named SS components} never have labels.
@menu
* SS component labels (old-style)::  
* Other component labels (old-style)::  
* Parameter passing (old-style)::  
@end menu


@node SS component labels (old-style), Other component labels (old-style), Old-style labels (lbl), Old-style labels (lbl)
@comment  node-name,  next,  previous,  up
@subsubsection SS component labels (old-style)
@cindex SS component labels (old-style)
In addition to the label there are two information fields,
@pxref{Labels (lbl)}.
They correspond to the effort and flow of the components as follows
@vtable @code
@item info_field_1
        effort
@item info_field_2
        flow
@end vtable
Each of these two fields contains one of the following @emph{attributes}:
@vtable @code
@item
external
        indicates that the corresponding variable is a system input or
output
@item internal
        indicates that the variable does not appear as a system output;
        it is an error to label an input in this way.
@item a number
        the value of the input; or the value of the (imposed) output
@item a symbol
        the symbolic value of the input; or the value of the (imposed) output
@item unknown
        used for the SS method of solving algebraic loops. This
        indicates that the corresponding system input (SS output) is to
        be chosen to set the corresponding system output (SS input) to zero.
@item zero
        used for the SS method of solving algebraic loops. This
        indicates that the corresponding system output (SS input) is to
        be set to zero using the variable indicted by the corresponding
        `unknown' label.
@end vtable

Some examples are:
@example
%Label  field1          field2
ss1     external        external
ss2     0               external
@end example


@node Other component labels (old-style), Parameter passing (old-style), SS component labels (old-style), Old-style labels (lbl)
@comment  node-name,  next,  previous,  up
@subsubsection Other component labels (old-style)
@cindex Other component labels (old-style)

In addition to the label there are two information fields,
@pxref{Labels (lbl)}.
They correspond to the constitutive relationship 
(see @pxref{Constitutive relationship} and arguments of the
component as follows
@vtable @code
@item info_field_1
        constitutive relationship 
@item info_field_2
        parameters
@end vtable

Some examples are:
@example
%Armature resistance
r_a     lin     effort,r_a

%Gearbox ratio
n       lin     effort,n
@end example

@strong{MTT} supports parameter-passing to  (@pxref{Parameter passing (old-style)})
subsystems.


@node Parameter passing (old-style),  , Other component labels (old-style), Old-style labels (lbl)
@comment  node-name,  next,  previous,  up
@subsubsection Parameter passing (old-style)
@cindex Parameter passing (old-style)
@strong{MTT} supports parameter-passing to  (@pxref{Parameter passing (old-style)})
subsystems within label files (@pxref{Labels (lbl)}). Within a subsystem,
explicit constitutive relationships and parameters (or groups thereof)
can be replaced by 
@code{$1}, @code{$2}, etc.

In a subsystem
@code{$i}, is replaced by the ith field of a colon @code{;} separated
field in the calling label file. This field may include commas @code{,}.

For example subsystem ROD contains the following lines in the label
file:
@example

%DESCRIPTION    Parameter 1:    length from end 1 to mass centre
%DESCRIPTION    Parameter 2:    length from end 2 to mass centre
%DESCRIPTION    Parameter 3:    inertia about mass centre
%DESCRIPTION    Parameter 4:    mass
%DESCRIPTION    See Section 10.2 of "Metamodelling"


%Inertias
J       lin     flow,$3
m_x     lin     flow,$4
m_y     lin     flow,$4

%Integrate angular velocity to get angle
th

%Modulated transformers
s1      lsin    flow,$1
s2      lsin    flow,$2
c1      lcos    flow,$1
c2      lcos    flow,$2

@end example

This can be used in a higher-level lbl (@pxref{Labels (lbl)}) file as:
@example
%SUMMARY Pendulum example from Section 10.3 of "Metamodelling"

%Rod parameters
rod     none    l;l;j;m

@end example

@node Description (desc), Structure (struc), Labels (lbl), Representations
@comment  node-name,  next,  previous,  up
@section Description (desc)
@cindex Description
@cindex desc

The bond graph can be described textually in LaTeX (.tex) description
file; this is the only language for this representation. This
representation is used by the LaTeX language version (@pxref{Language tex
(abg.tex)}) of the acausal bond graph representation (@pxref{Acausal
bond graph (abg)}).

@menu
* Language tex (desc.tex)::     
@end menu

@node Language tex (desc.tex),  , Description (desc), Description (desc)
@comment  node-name,  next,  previous,  up
@subsection Language tex (desc.tex)
@cindex Language tex (desc.tex)
This file may contain any LaTeX compatible commands. Any mathematics
should conform to the AMSmath package.

@node Structure (struc), Constitutive Relationship (cr), Description (desc), Representations
@comment  node-name,  next,  previous,  up
@section Structure (struc)
@cindex Structure
@cindex struc

The causal bond graph implies a set of equations describing the
system. The Structure (struc) representation describes the structure of
these equations in terms of the input, outputs, states and non-states of
the system.

@menu
* Language txt (struc.txt)::    
* Language tex (struc.tex)::    
* Structure (view)::            
@end menu

@node Language txt (struc.txt), Language tex (struc.tex), Structure (struc), Structure (struc)
@comment  node-name,  next,  previous,  up
@subsection Language txt (struc.txt)
@cindex Language txt (struc.txt)
This text tile contains a description of the system structure
(@pxref{Structure (struc)} with 5 tab-separated columns containing the
following information:
@vtable @code
@item type
        input, output state or nonstate
@item   
index
        an integer corresponding to the array index
@item 
component name
        the name of the component corresponding to the variable
@item system name
        the name of the system containing the component
@item repetition
        an integer corresponding to the repetition of a repeated subsystem.
@end vtable

An example of such a file (corresponding to rc) (@pxref{Quick start}) is:
@example
input           1       e1      rc      1
output          1       e2      rc      1
state           1       c       rc      1
@end example


@node Language tex (struc.tex), Structure (view), Language txt (struc.txt), Structure (struc)
@comment  node-name,  next,  previous,  up
@subsection Language tex (struc.tex)
@cindex Language tex (struc.tex)
This LaTeX  (@pxref{LaTeX}) file contains  a description of the system structure
(@pxref{Structure (struc)} in @code{longtable} format. It is a useful
item to include in a report(@pxref{Report}).

@node Structure (view),  , Language tex (struc.tex), Structure (struc)
@subsection Language tex (view)
@cindex Structure (view)
@cindex view Structure
This representation has the standard text view
(@pxref{Views}).

@node Constitutive Relationship (cr), Parameters, Structure (struc), Representations
@comment  node-name,  next,  previous,  up
@section Constitutive relationship (cr)
@cindex Constitutive relationship

The constitutive relationship (@pxref{Constitutive relationship})
of a simple component (@pxref{Simple components} is
defined in the symbolic algebra language Reduce (@pxref{Reduce}).
The constitutive relationship of a compound components 
(@pxref{Compound components})
is implied by the constitutive relationships of its constituent components.

@menu
* Predefined constitutive relationships::  
* DIY constitutive relationships::  
* Unresolved constitutive relationships::  
* Unresolved constitutive relationships - Octave::  
* Unresolved constitutive relationships - c++::  
@end menu

@node Predefined constitutive relationships, DIY constitutive relationships, Constitutive Relationship (cr), Constitutive Relationship (cr)
@comment  node-name,  next,  previous,  up
@subsection  Predefined constitutive relationships
@cindex Predefined constitutive relationships

Some common cr's are predefined by MTT; these are:
@vtable @code
@item lin
        a linear constitutive relationship   
@item exotherm
        an exothermic reaction
@end vtable

@menu
* lin::                         
* exotherm::                    
@end menu

@node lin, exotherm, Predefined constitutive relationships, Predefined constitutive relationships
@comment  node-name,  next,  previous,  up
@subsubsection lin
@findex lin
The constitutive relationship @code{lin} is predefined for the following
components.
@vtable @code
@item R
        (one-port) R component
@item TF
        transformer
@item GY
        gyrator
@item MTF
        modulated transformer
@item MGY
        modulated gyrator
@item FMR
        flow-modulated resistor
@end vtable
Lin takes two arguments in the form causality,gain
@vtable @code
@item causality
        the causality (effort or flow) of the @emph{input} to the
constitutive relationship
@item gain
        the gain of the component when the input causality is as
specified in the first argument.
@end vtable
For example the arguments
@example
flow,r
@end example
given to an R component corresponds to
@example
e = rf
@end example
if if the input causality is flow
or
@example
f = e/r
@end example
if if the input causality is effort.

@node exotherm,  , lin, Predefined constitutive relationships
@comment  node-name,  next,  previous,  up
@subsubsection exotherm
@findex exotherm

@node DIY constitutive relationships, Unresolved constitutive relationships, Predefined constitutive relationships, Constitutive Relationship (cr)
@comment  node-name,  next,  previous,  up
@subsection  DIY constitutive relationships
@cindex DIY constitutive relationships
You can write your own constitutive relationships using Reduce
(@pxref{Reduce}). This requires some understanding as to how
@strong{MTT} represent the elementary system equations
(@pxref{Elementary system equations}). Looking at the predefined
constitutive relationships is a good way to get started
(@pxref{File structure}).

@node Unresolved constitutive relationships, Unresolved constitutive relationships - Octave, DIY constitutive relationships, Constitutive Relationship (cr)
@subsection Unresolved constitutive relationships
@cindex Unresolved constitutive relationships

Consider the following CR file.
@example
FOR ALL rho,g,vol,h,topt,bott,flowin,press
LET tktf2(rho,g,vol,h,topt,bott,effort,2,press,effort,1)
        = tank(rho,g,vol,h,topt,bott,press);      
@end example
Assuming that `tank' is not defined in a
reduce file, MTT will leave it unresolved when generating m or c code.

The resulting function can then be expressed as octave
(@pxref{Unresolved constitutive relationships - Octave}) or c++ code as
(@pxref{Unresolved constitutive relationships - c++}) appropriate.

@node Unresolved constitutive relationships - Octave, Unresolved constitutive relationships - c++, Unresolved constitutive relationships, Constitutive Relationship (cr)
@subsection  Unresolved constitutive relationships - Octave
@cindex Unresolved constitutive relationships - Octave
Following the example of the previous section, the unresolved CR `tank'
can be expressed as an Octave m-file. For example:
@example
function p = tank (rho,g,vol,h,topt,bott,press)

  ## usage:  p = tank (vol,h,topt,bott,press)
  ##
  ## 

   val = press; zt = topt; zb = bott; 
   zval = 0.5*(abs(zb+(zt-zb)*val-h)+(zb+(zt-zb)*val-h));

   p = rho*g*zval + 0.5*(1+tanh((press-0.98)*500))*100000;

endfunction
@end example
This will be automatically loaded into octave.

@node Unresolved constitutive relationships - c++,  , Unresolved constitutive relationships - Octave, Constitutive Relationship (cr)
@subsection  Unresolved constitutive relationships - c++
@cindex Unresolved constitutive relationships - Octave
Following the example of the previous section, the unresolved CR `tank'
can be expressed in c++ code. For example:
@example
inline double tank(const double rho, 
		   const double g, 
		   const double vol, 
		   const double h, 
		   const double topt, 
		   const double bott, 
		   const double press)


  /*  ## usage:  p = tank (vol,h,topt,bott,press)
    ##
    ##
  */
  double p, val, zval, zt, zb;

  val = press;
  zt = topt;
  zb = bott;
  zval = 0.5 * (abs(zb + (zt - zb) * val - h) + zb + (zt - zb) * val - h);

  p = rho * g * zval + 0.5 * (1 + tanh((press - 0.98) * 500)) * 100000L;

  return p;

@end example

To make sure that this is used in system `model', the model_cr.h file
must be as follows:
@example
// CR headers for system model
#include "tank.c"
@end example

@node Parameters, Causal bond graph (cbg), Constitutive Relationship (cr), Representations
@comment  node-name,  next,  previous,  up
@section Parameters
@cindex Parameters

In general, lbl (@pxref{Labels (lbl)}) files contain symbolic
parameters. @strong{MTT} provides three ways of substituting for these
parameters:
@itemize @bullet
@item
symbolic substitution
@item
symbolic substitution for simplification of displayed equations
@item
numeric
@end itemize

@menu
* Symbolic parameters (subs.r)::  
* Symbolic parameters for simplification (simp.r)::  
* Numeric parameters (numpar)::  
@end menu

@node Symbolic parameters (subs.r), Symbolic parameters for simplification (simp.r), Parameters, Parameters
@comment  node-name,  next,  previous,  up
@subsection Symbolic parameters (subs.r)
@cindex  Symbolic parameters
@vindex subs.r
This file contains reduce statements to symbolically change the
expressions describing the system.
For example, a useful set of trig substitutions is:
@example
LET cos(~x)*cos(~y) = (cos(x+y)+cos(x-y))/2;
LET cos(~x)*sin(~y) = (sin(x+y)-sin(x-y))/2;
LET sin(~x)*sin(~y) = (cos(x-y)-cos(x+y))/2;
LET cos(~x)^2       = (1+cos(2*x))/2;
LET sin(~x)^2       = (1-cos(2*x));
@end example

@node Symbolic parameters for simplification (simp.r), Numeric parameters (numpar), Symbolic parameters (subs.r), Parameters
@comment  node-name,  next,  previous,  up
@subsection Symbolic parameters for simplification  (simp.r)
@cindex  Symbolic parameters for simplification 
@vindex simp.r
This file contains reduce statements to symbolically change the
expressions describing the system. Unlike the subs.r file
(@pxref{Symbolic parameters (subs.r)}) it does not affect all system
transformations; only those converting to LaTeX form.

@node Numeric parameters (numpar),  , Symbolic parameters for simplification (simp.r), Parameters
@comment  node-name,  next,  previous,  up
@subsection Numeric parameters (numpar)
@cindex  Numeric parameters

When computing time and frequency responses; or when evaluating
functions in Octave (@pxref{Octave}); symbolic parameters need numerical
instantiations. 

The numpar representation provides the relevant @emph{numerical}
information. It comes in a number of languages:
@ftable @code
@item txt
        a textual description of the parameter values -- this is the
defining representation (@pxref{Defining representations}).
@item m
        readable by @code{octave} a high-level interactive language for numerical
        computation -- translated by @strong{mtt} from the txt version.
@item c
        readable by @code{gcc} a c compiler -- translated by @strong{mtt} from the txt version.

@end ftable

@menu
* Text form (numpar.txt)::      
@end menu

@node Text form (numpar.txt),  , Numeric parameters (numpar), Numeric parameters (numpar)
@comment  node-name,  next,  previous,  up
@subsubsection Text form (numpar.txt)
@cindex  Numeric parameters
This is the textual form of the numerical parameters representation
(@pxref{Numeric parameters (numpar)}). Lines are either
@ftable @code
@item assignment statements
        variable = value
@item comments
        lines beginning with #
@item commented assignment statements
        variable = value # comments
@end ftable
An example file is:
@example
# Numerical parameter file (rc_numpar.txt)
# Generated by MTT at Mon Jun 16 15:10:17 BST 1997

# %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
# %% Version control history
# %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
# %% $Id$
# %% $Log$
# %% Revision 1.66  2000/12/05 14:20:55  peterg
# %% Added the c++  anf m CR info.
# %%
# %% Revision 1.65  2000/11/27 15:36:15  peterg
# %% NOPAR --> NOTPAR
# %%
# %% Revision 1.64  2000/11/16 14:22:48  peterg
# %% added UNITS declaration
# %%
# %% Revision 1.63  2000/11/03 14:41:08  peterg
# %% Added PAR and NOTPAR stuff
# %%
# %% Revision 1.62  2000/10/17 17:53:34  peterg
# %% Added some simulation details
# %%
# %% Revision 1.61  2000/09/14 17:13:06  peterg
# %% New options table
# %%
# %% Revision 1.60  2000/09/14 17:09:20  peterg
# %% Tidied up valid name sections
# %% Tidied up defining represnetations table
# %% Verion 4.6
# %%
# %% Revision 1.59  2000/08/30 13:09:00  peterg
# %% Updated option table
# %%
# %% Revision 1.58  2000/08/01 13:30:19  peterg
# %% Version 4.4
# %% updated STEPFACTOR info
# %% describes octave and OCST interfaces
# %%
# %% Revision 1.57  2000/07/20 07:55:44  peterg
# %% Version 4.3
# %%
# %% Revision 1.56  2000/05/19 17:49:17  peterg
# %% Extended the user defined representation section -- new nppp rep.
# %%
# %% Revision 1.55  2000/03/16 13:53:31  peterg
# %% Correct date
# %%
# %% Revision 1.54  2000/03/15 21:22:57  peterg
# %% Updated to 4.1 -- old style SS no longer supported
# %%
# %% Revision 1.53  1999/12/22 05:33:10  peterg
# %% Updated for 4.0
# %%
# %% Revision 1.52  1999/11/23 00:25:11  peterg
# %% Added the sensitivity reps
# %%
# %% Revision 1.51  1999/11/16 04:43:47  peterg
# %% Added start of sensitivity section
# %%
# %% Revision 1.50  1999/11/16 00:30:35  peterg
# %% Updated simulation section
# %% Added vector components
# %%
# %% Revision 1.49  1999/07/20 23:44:58  peterg
# %% V 3.8
# %%
# %% Revision 1.48  1999/07/19 03:08:33  peterg
# %% Added documentation for (new) SS lbl fields
# %%
# %% Revision 1.47  1999/03/09 01:42:22  peterg
# %% Rearranged the User interface section
# %%
# %% Revision 1.46  1999/03/09 01:18:01  peterg
# %% Updated for 3.5 including xmtt
# %%
# %% Revision 1.45  1999/03/03 02:39:26  peterg
# %% Minor updates
# %%
# %% Revision 1.44  1999/02/17 06:52:14  peterg
# %% New level formula dor artwork
# %%
# %% Revision 1.43  1998/11/25 16:49:24  peterg
# %% Put in subs.r documentation (was called params.r)
# %%
# %% Revision 1.42  1998/11/24 12:24:59  peterg
# %% Added section on simulation output
# %% Version 3.4
# %%
# %% Revision 1.41  1998/09/02 12:04:15  peterg
# %% Version 3.2
# %%
# %% Revision 1.40  1998/08/27 08:36:39  peterg
# %% Removed in. methods except Euler anf implicit
# %%
# %% Revision 1.39  1998/08/18 10:44:28  peterg
# %% Typo
# %%
# %% Revision 1.38  1998/08/18 09:16:38  peterg
# %% Version 3.1
# %%
# %% Revision 1.37  1998/08/17 16:14:30  peterg
# %% Version 3.1 - includes documentation on METHOD=IMPLICIT
# %%
# %% Revision 1.36  1998/07/30 17:33:15  peterg
# %% VERSION 3.0
# %%
# %% Revision 1.35  1998/07/22 11:00:53  peterg
# %% Correct date!
# %%
# %% Revision 1.34  1998/07/22 11:00:13  peterg
# %% Version to BAe
# %%
# %% Revision 1.33  1998/07/17 19:32:19  peterg
# %% Added more about aliases
# %%
# %% Revision 1.32  1998/07/05 14:21:56  peterg
# %% Further additions (Carlisle-Glasgow)
# %%
# %% Revision 1.31  1998/07/04 11:35:57  peterg
# %% Strarted new lbl description
# %%
# %% Revision 1.30  1998/07/02 18:39:20  peterg
# %% Started 3.0
# %% Added alias and default sections.
# %%
# %% Revision 1.29  1998/05/19 19:46:58  peterg
# %% Added the odess description
# %%
# %% Revision 1.28  1998/05/14 09:17:22  peterg
# %% Added METHOD variable to the simpar file
# %%
# %% Revision 1.27  1998/05/13 10:03:09  peterg
# %% Added unknown/zero SS label documentation.
# %%
# %% Revision 1.26  1998/04/29 15:12:46  peterg
# %% Version 2.9.
# %%
# %% Revision 1.25  1998/04/12 17:00:26  peterg
# %% Added new port features: coerced direction and top-level behaviour.
# %%
# %% Revision 1.24  1998/04/05 18:27:20  peterg
# %% This was the 2.6 version
# %%
# Revision 1.23  1997/08/24  11:17:51  peterg
# This is the released  version 2.5
#
# %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

# Parameters
c =     1.0; # Default value
r =     1.0; # Default value
# Initial states
x(1) =  0.0; # Initial state for rc (c)
@end example
As usual, @strong{MTT} provides a default text file to be edited by the
user (@pxref{Text editors}).

@node Causal bond graph (cbg), Elementary system equations, Parameters, Representations
@comment  node-name,  next,  previous,  up
@section Causal bond graph (cbg)
@cindex Causal bond graph (cbg)
The causal bond graph is the causally complete version of the
Acausal bond graph (@pxref{Acausal bond graph (abg)}).

To create the causal bond graph of system `sys' in language fig type:
@example
mtt sys cbg fig
@end example
To create the causal bond graph of system `sys' in language m type:
@example
mtt sys cbg m
@end example
To view the causal bond graph of system `sys' type:
@example
mtt sys cbg view
@end example

@menu
* Language fig (cbg.fig)::      
* Language m (cbg.m)::          
@end menu

@node Language fig (cbg.fig), Language m (cbg.m), Causal bond graph (cbg), Causal bond graph (cbg)
@subsection Language fig (cbg.fig) 
@cindex Language fig (cbg.fig) 
@pindex Language fig (cbg.fig) 
The fig file is created by @strong{MTT}. It is identical to the
corresponding acausal representation (@pxref{Language fig (abg.fig)})
except that
@itemize @bullet
@item
the new causal strokes are added (using a double thickness line in blue)
@item
components that are undercausal are bold and green
@item
components that are overcausal are bold and red
@end itemize

@node Language m (cbg.m),  , Language fig (cbg.fig), Causal bond graph (cbg)
@comment  node-name,  next,  previous,  up
@subsection Language m (cbg.m)
@cindex Language m (cbg.m) 
@cindex cbonds
@cindex status


The causal bond graph of system `sys' is represented as
 an m file with heading:
@example
function [cbonds,status] = sys_cbg
@end example
The two outputs of this function are:
@itemize @bullet
@item
cbonds
@item
status
@end itemize

@emph{cbonds} is  a matrix with
@itemize @bullet
@item
one row for each bond
@item
the first column contains the arrow-orientated 
(@pxref{Arrow-orientated causality}) 
causality of the @emph{effort} variable.
@item
the second column contains the arrow-orientated 
(@pxref{Arrow-orientated causality}) 
causality of the @emph{flow} variable.
@end itemize

@emph{status} is  a matrix with
@itemize @bullet
@item
one row for each component
@item
the first column contains 1 if the component is overcausal; 0 if the
component is causally complete and -1 if the component is undercausal.
@end itemize
A successful model would therefore have all zeros in the status matrix.

@menu
* Transformation abg2cbg_m::    
@end menu

@node Transformation abg2cbg_m,  , Language m (cbg.m), Language m (cbg.m)
@comment  node-name,  next,  previous,  up
@subsubsection Transformation abg2cbg_m
@cindex Transformation abg2cbg_m

This transformation takes the acausal bond graph as an m file 
(@pxref{Language m (abg.m)}) and transforms it into a causal bond graph in
m-file format (@pxref{Language m (cbg.m)}).

It is based on the m-function abg2cbg.m which iteratively tries to
complete causality whilst recursively searching the bond graph
structure.
If causality is incomplete, it picks the first acausal dynamic (C or I)
component, asserts integral causality, and tries again.

This is essentially the sequential causality assignment procedure of
Karnopp and Rosenberg.

The transformation informs the user of the final status in terms of the
percentage of causally complete components; a successful model will
yield 100% here.

@node Elementary system equations, Differential-Algebraic Equations, Causal bond graph (cbg), Representations
@comment  node-name,  next,  previous,  up
@section Elementary system equations (ese)
@cindex Elementary system equations

The elementary system equations are a complete set of assignment statements
describing the dynamic system corresponding to the bond graph.
They are in the Reduce (@pxref{Reduce}) language.

Because these are based on a causally complete system, these assignment
statements are directly soluble by substitution.

Unlike early versions of @strong{MTT}, @strong{MTT} does @emph{not} sort
the equations in order of solution, but rather leaves them sorted by
component and subsystem.

These are not supposed to be read by the user, so there is no view
facility as such. However, you may read these with your favourite text
editor and, to this end,  helpful comment lines have been added.

Wherever components have an explicit constitutive relationship, the
corresponding RHS of the equation has a standard form.

@example
cr(arguments,out_causality,outport,
        input_1, causality_1, port_1,
        ....
        input_i, causality_i, port_i,
        ....
        input_n, causality_n, port_n
        );
@end example
where the symbols have the following meaning
@vtable @code
@item arguments
        the constitutive relationship arguments
@item out_causality
        the causality (effort or flow) of the output variable
        (@pxref{Variables})
@item outport
        the number (integer) of the output port of the system
@item input_i
        the ith input to the component
@item causality_i
        the causality (effort or flow) of the ith input variable
        (@pxref{Variables})
@item port_i
        the number (integer) of the ith input port of the system
@end vtable

An example for a resistor with linear constitutive relationship is:
@example
rc_1_bond4_flow := lin(flow,r,flow,1,
        rc_1_bond4_effort,effort,1
        );
@end example

@menu
* Transformation cbg2ese_m2r::  
@end menu

@node Transformation cbg2ese_m2r,  , Elementary system equations, Elementary system equations
@comment  node-name,  next,  previous,  up
@subsubsection Transformation cbg2ese_m2r
@cindex Transformation cbg2ese_m2r
@cindex Structure
@cindex def.r
This transformation takes the causal bond graph as an m file 
(@pxref{Language m (cbg.m)}) and transforms it into elementary system
equations
in Reduce (@pxref{Reduce})
form.

It is based on the m-function cbg2ese.m which iteratively traverses the
causal bond graph writing equations as it goes.

It also writes out the system structure as the file @file{sys_def.r}.


@node Differential-Algebraic Equations, Constrained-state Equations, Elementary system equations, Representations
@section Differential-Algebraic Equations (dae)
@cindex Differential-Algebraic Equations
@cindex DAE

The system differential algebraic equations describe the system dynamics together 
together with any algebraic constraints. 

They are generated in language @code{lang} for system 
@code{sys} by:
@example
mtt sys dae lang
@end example
Valid languages are:
@vtable @code
@item r
        reduce (@pxref{Reduce}).
@item m
        m  (@pxref{m}).
@item view
        reduce (@pxref{Views}).
@end vtable


There are five sets of variables describing the system:
@vtable @code
@item x
        the system states (corresponding to C and I components with integral
        causality.
@item z
        the system nonstates (corresponding to C and I components with derivative
        causality.
@item u
        the system inputs  (corresponding to SS components
        with external attribute).
@item ui
        the @emph{internal} system inputs (corresponding to SS components
        with internal attribute) used to solve algebraic loops
        (@pxref{Algebraic loops}).
@item y
        the  system outputs (corresponding to SS components
        with external attribute).
        @end vtable

In general there are four sets of equations. The right-hand side of
 each is a function of x, dz/dt,  u and ui and the left hand sides are:
@enumerate
@item
the derivative of x (dx/dt)
@item
z
@item
w=0 (the algebraic equations)
@item
y
@end enumerate

@menu
* Differential-Algebraic Equations (reduce)::  
* Differential-Algebraic Equations (m)::  
@end menu

@node Differential-Algebraic Equations (reduce), Differential-Algebraic Equations (m), Differential-Algebraic Equations, Differential-Algebraic Equations
@subsection Language reduce (dae.r)
@cindex Differential-Algebraic Equations (reduce)
@cindex dae.r 

The system DAEs (@pxref{Differential-Algebraic Equations})
are represented in the reduce  (@pxref{Reduce}) language as 
arrays containing the algebraic expressions for the 
right hand sides of each set of equations. The arrays are:
@vtable @code
@item MTTx
        x -- the system states (corresponding to C and I components with integral
        causality.

@item MTTz
        z -- the system nonstates (corresponding to C and I components with derivative
        causality.
@item MTTu
        u -- the system inputs  (corresponding to SS components
        with external attribute).
@item mttv
        ui -- the @emph{internal} system inputs (corresponding to SS components
        with internal attribute) used to solve algebraic loops
        (@pxref{Algebraic loops}).
@item MTTy
        y -- the  system outputs (corresponding to SS components
        with external attribute).
        @end vtable

@menu
* Transformation ese2dae_r::    
@end menu

@node Transformation ese2dae_r,  , Differential-Algebraic Equations (reduce), Differential-Algebraic Equations (reduce)
@subsubsection Transformation ese2dae_r
@cindex Transformation ese2dae_r
@pindex  ese2dae_r

This transformation (@pxref{What is a Transformation?}) 
uses Reduce (@pxref{Reduce}) to combine the elementary system
equations (@pxref{Elementary system equations}) with the
constitutive relationships (@pxref{Constitutive relationship})
and simplify the result. 

@node Differential-Algebraic Equations (m),  , Differential-Algebraic Equations (reduce), Differential-Algebraic Equations
@subsection Language m (dae.m)
@cindex Differential-Algebraic Equations (m)
@cindex dae.m
The system DAEs (@pxref{Differential-Algebraic Equations})
are represented in the m (@pxref{m}) language as  
two m-functions of the form:

@example
function resid = sys_dae(dx,x,t)
function y  = sys_dae(dx,x,t)
@end example
Where x is the dae @emph{descriptor} vector and dx its 
time derivative; t is the time.
The first function is of a form suitable for solution by DASSL;  
the second function can then be used to find the coresponding system
output.

@menu
* Transformation dae_r2m::      
@end menu

@node Transformation dae_r2m,  , Differential-Algebraic Equations (m), Differential-Algebraic Equations (m)
@subsubsection Transformation dae_r2m
@cindex Transformation dae_r2m
@pindex  dae_r2m

This transformation (@pxref{What is a Transformation?}) 
uses Reduce (@pxref{Reduce}) to rewrite the elementary system
equations (@pxref{Elementary system equations}) in m-file 
format  (@pxref{m}) . Numerical parameters are declared as global.


@node Constrained-state Equations, Ordinary Differential Equations, Differential-Algebraic Equations, Representations
@section Constrained-state Equations (cse)
@cindex Constrained-state Equations
@cindex ODE

The system constrained-state equations describe the system dynamics for
a special class of systems (see the book for details). The resuting
equations are of the form:
@example
E(x) dx/dt = f(x,u)
y = g(x,u)
@end example
They typically occure where two or more states are constrained to be equal, or
proportional, to each other. For example, two capacitors in parallel or
two inertias connected by a stiff shaft.


They are generated in language @code{lang} for system 
@code{sys} by:
@example
mtt sys cse lang
@end example
Valid languages are:
@vtable @code
@item r
        reduce (@pxref{Reduce}).
@item m
        m  (@pxref{m}).
@item view
        reduce (@pxref{Views}).
@end vtable

There are three sets of variables describing the system:
@vtable @code
@item x
        the system states (corresponding to C and I components with integral
        causality.
@item u
        the system inputs  (corresponding to SS components
        with external attribute).
@item y
        the  system outputs (corresponding to SS components
        with external attribute).
        @end vtable

In general there are two sets of equations. The right-hand side of
 each is a function of x and  u  and the left hand sides are:
@enumerate
@item
the derivative of x (dx/dt)
y
@end enumerate

@menu
* Constrained-state Equations (reduce)::  
* Constrained-state Equations (view)::  
@end menu

@node Constrained-state Equations (reduce), Constrained-state Equations (view), Constrained-state Equations, Constrained-state Equations
@subsection Language reduce (cse.r)
@cindex Constrained-state Equations (reduce)
@cindex cse.r 

The system CSEs (@pxref{Constrained-state Equations})
are represented in the reduce  (@pxref{Reduce}) language as 
arrays containing the algebraic expressions for the 
right hand sides of each set of equations. The arrays are:
@vtable @code
@item MTTx
        x -- the system states (corresponding to C and I components with integral
        causality.
@item MTTu
        u -- the system inputs  (corresponding to SS components
        with external attribute).
@item MTTy
        y -- the  system outputs (corresponding to SS components
        with external attribute).
@end vtable
together with the array containing the elements of the E matrix.
@menu
* Transformation dae2cse_r::    
@end menu

@node Transformation dae2cse_r,  , Constrained-state Equations (reduce), Constrained-state Equations (reduce)
@subsubsection Transformation dae2cse_r
@cindex Transformation dae2cse_r
@pindex  dae2cse_r

This transformation (@pxref{What is a Transformation?}) 
Reduce (@pxref{Reduce}) to find various Jacobians which are combined to
find the E matrix and the
constrained-state equations (@pxref{Constrained-state Equations}).

@node Constrained-state Equations (view),  , Constrained-state Equations (reduce), Constrained-state Equations
@subsection Language m (view)
@cindex Constrained-state Equations (view)
@cindex view Constrained-state Equations
This representation has the standard text view
(@pxref{Views}).

@node Ordinary Differential Equations, Descriptor matrices, Constrained-state Equations, Representations
@section Ordinary Differential Equations
@cindex Ordinary Differential Equations
@cindex ODE

The system ordinary differential equations describe the system dynamics.

They are generated in language @code{lang} for system 
@code{sys} by:
@example
mtt sys ode lang
@end example
Valid languages are:
@vtable @code
@item r
        reduce (@pxref{Reduce}).
@item m
        m  (@pxref{m}).
@item view
        reduce (@pxref{Views}).
@end vtable

There are three sets of variables describing the system:
@vtable @code
@item x
        the system states (corresponding to C and I components with integral
        causality.
@item u
        the system inputs  (corresponding to SS components
        with external attribute).
@item y
        the  system outputs (corresponding to SS components
        with external attribute).
        @end vtable

In general there are two sets of equations. The right-hand side of
 each is a function of x and  u  and the left hand sides are:
@enumerate
@item
the derivative of x (dx/dt)
y
@end enumerate

@menu
* Ordinary Differential Equations (reduce)::  
* Ordinary Differential Equations (m)::  
* Ordinary Differential Equations (view)::  
@end menu

@node Ordinary Differential Equations (reduce), Ordinary Differential Equations (m), Ordinary Differential Equations, Ordinary Differential Equations
@subsection Language reduce (ode.r)
@cindex Ordinary Differential Equations (reduce)
@cindex ode.r 

The system ODEs (@pxref{Ordinary Differential Equations})
are represented in the reduce  (@pxref{Reduce}) language as 
arrays containing the algebraic expressions for the 
right hand sides of each set of equations. The arrays are:
@vtable @code
@item MTTx
        x -- the system states (corresponding to C and I components with integral
        causality.
@item MTTu
        u -- the system inputs  (corresponding to SS components
        with external attribute).
@item MTTy
        y -- the  system outputs (corresponding to SS components
        with external attribute).
        @end vtable

@menu
* Transformation cse2ode_r::    
@end menu

@node Transformation cse2ode_r,  , Ordinary Differential Equations (reduce), Ordinary Differential Equations (reduce)
@subsubsection Transformation cse2ode_r
@cindex Transformation cse2ode_r
@pindex  cse2ode_r

This transformation (@pxref{What is a Transformation?}) 
uses Reduce (@pxref{Reduce}) to invert the E matrix of the 
constrained-state equations (@pxref{Constrained-state Equations})
and simplify the result. 

@node Ordinary Differential Equations (m), Ordinary Differential Equations (view), Ordinary Differential Equations (reduce), Ordinary Differential Equations
@subsection Language m (ode.m)
@cindex Ordinary Differential Equations (m)
@cindex ode.m
The system ODEs (@pxref{Ordinary Differential Equations})
are represented in the m (@pxref{m}) language as  
two m-functions of the form:

@example
function dx = sys_ODE(x,t)
function y  = sys_ODE(dx,x,t)
@end example
Where x is the ODE @emph{state} vector and dx its 
time derivative; t is the time.
The first function is of a form suitable for solution by odesol;  
the second function can then be used to find the corresponding system
output.

@menu
* Transformation ode_r2m::      
@end menu

@node Transformation ode_r2m,  , Ordinary Differential Equations (m), Ordinary Differential Equations (m)
@subsubsection Transformation ode_r2m
@cindex Transformation ode_r2m
@pindex  ode_r2m

This transformation (@pxref{What is a Transformation?}) 
uses Reduce (@pxref{Reduce}) to rewrite the
ordinary differential equations
(@pxref{Ordinary Differential Equations}) in m-file 
format  (@pxref{m}) . Numerical parameters are declared as global.

@node Ordinary Differential Equations (view),  , Ordinary Differential Equations (m), Ordinary Differential Equations
@subsection Language m (view)
@cindex Ordinary Differential Equations (view)
@cindex view Ordinary Differential Equations
This representation has the standard text view
(@pxref{Views}).

@node Descriptor matrices, Report, Ordinary Differential Equations, Representations
@section Descriptor matrices (dm)
@cindex Descriptor matrices
@cindex dm

The system descriptor matrices A, B, C, D and E describe the 
@emph{linearised} system dynamics in the form
@example
E dx/dt = Ax + Bu
y = Cx + Du
@end example

They are generated in language @code{lang} for system 
@code{sys} by:
@example
mtt sys dm lang
@end example
Valid languages are:
@vtable @code
@item r
        reduce (@pxref{Reduce}).
@item m
        m  (@pxref{m}).
@item view
        reduce (@pxref{Views}).
@end vtable


@menu
* Descriptor matrices (reduce)::  
* Descriptor matrices (m)::     
@end menu

@node Descriptor matrices (reduce), Descriptor matrices (m), Descriptor matrices, Descriptor matrices
@subsection Language reduce (dm.r)
@cindex Descriptor matrices (reduce)
@cindex dm.r 

The system  descriptor matrices (@pxref{Descriptor matrices})
are represented in the reduce  (@pxref{Reduce}) language as 
arrays containing the four matrices. The arrays are:
@vtable @code
@item MTTA
        A 
@item MTTB
        B 
@item MTTA
        C
@item MTTD
        D
@item MTTE
        E
@end vtable

@node Descriptor matrices (m),  , Descriptor matrices (reduce), Descriptor matrices
@subsection Language m (dm.m)
@cindex Descriptor matrices (m)
@cindex dm.m
The system descriptor matrices (@pxref{Descriptor matrices})
are represented in the m (@pxref{m}) language as  
an m-function of the form:

@example
function [A,B,C,D,E] = sys_dm
@end example

System numeric parameters (@pxref{Numeric parameters})
are passed via global variables defined in the _numpar.m file.
@c (@pxref{numpar.m}). 
Thus the system descriptor matrices are
typically generated in Octave (@pxref{Octave}) as follows:

@example
sys_numpar
[A,B,C,D,E] = sys_dm
@end example

Parameters can be changed from their default values by entering
their values directly into Octave (@pxref{Octave})  and then invoking
@code{sys_dm}; for example
@example
sys_numpar
par_1 = 25
par_2 = par_1 + 3
[A,B,C,D,E] = sys_dm
@end example


@node Report,  , Descriptor matrices, Representations
@section Report (rep)
@cindex Report
@cindex rep

@strong{MTT} has a report-generator feature. The user specifies the
report contents in a text file (@pxref{Report (text)}) using an
appropriate text editor (@pxref{Text editors}).

For example, the report can be viewed by typing
@example
mtt system rep view
@end example


@menu
* Report (text)::               
* Report (view)::               
@end menu

@node Report (text), Report (view), Report, Report
@subsection Language text (rep.txt)
@cindex Report (text)
@cindex rep.txt 

The user specifies the report contents in a text file (@pxref{Report
(text)}) using an appropriate text editor (@pxref{Text editors}).
The text file contains lines which are either comments (indicated by %)
or valid @strong{MTT} commands. The report will then contain appropriate
sections. The following languages are supported by the report generator:
@ftable @code
@item m
        @code{octave} a high-level interactive language for numerical
        computation.
@item r
        @code{reduce}  a high-level interactive language for symbolic
        computation.
@item tex
        @code{latex} a text processor.
@item ps
        @code{ghostview} another document viewer.
@item c
        @code{gcc} a c compiler.
@end ftable
For example:
@example
mtt rc abg tex
mtt rc cbg ps
mtt rc struc tex
mtt rc ode tex
mtt rc sro ps
mtt rc tf tex
mtt rc lmfr ps
@end example

The acausal bond graph (abg) (@pxref{Acausal bond graph (abg)}) with the
tex language is handled in a special way: the acausal Bond Graph  in
fig format (@pxref{Language fig (abg.fig)}), the label file (@pxref{Labels (lbl)})
the description file (@pxref{Description (desc)}), together with
corresponding subsystems are included in the report. It is recommended
that the first (non-comment line) in the file should be:
@example
mtt <system> abg tex
@end example
where @code{<system>} is the name of the (top-level) system.

As usual, @strong{MTT} provides a default text file to be edited by the
user (@pxref{Text editors}).

In the special case that the first argument to mtt (normally the system)
is a directory, a default text file is provided which generates a report
for all systems to be found in that directory tree.

@node Report (view),  , Report (text), Report
@subsection Language view
@cindex Report (view)
@cindex view Report
This representation has the standard text view
(@pxref{Views}).

@node Extending MTT, Languages, Representations, Top
@comment  node-name,  next,  previous,  up
@chapter Extending MTT
@cindex Extending MTT
@cindex Make

@strong{MTT} has a number of built-in mechanisms for the user to extend
its capabilities. As @strong{MTT} is based on `Make' it is unsurprising
that these  involve the creation of `make files'. 

@menu
* Makefiles::                   
* New representations::         
@end menu

@node Makefiles, New representations, Extending MTT, Extending MTT
@comment  node-name,  next,  previous,  up
@section Makefiles
@cindex Makefiles

If a file called `Makefile' exists in the current directory,
@strong{MTT} executes it using make before doing anything else. This is
useful if one of the .txt files contains a reference to, for example, an
octave function of which @strong{MTT} unaware. Such a function can be
created using the makefile. An example `Makefile' is
@example
# Makefile for the Two link GMV example

all: msdP_tf.m TwoLinkP_obs.m TwoLinkP_sm.m twolinkp_sm.m TwoLinkGMV_numpar.m 

msdP_tf.m: msdP_abg.fig 
        mtt -q msdP tf m

TwoLinkP_obs.m: TwoLinkP_abg.fig TwoLinkP_lbl.txt
        mtt -q TwoLinkP obs m

TwoLinkP_sm.m: TwoLinkP_abg.fig TwoLinkP_lbl.txt
        mtt -q TwoLinkP sm m

twolinkp_sm.m: TwoLinkP_sm.m
        cp -v TwoLinkP_sm.m twolinkp_sm.m

TwoLinkGMV_numpar.m: TwoLinkGMV_numpar.txt
        mtt -q TwoLinkGMV numpar m
@end example
All of the files in the line stating `all:' are created when
@strong{MTT} is executed (if they don't already exist).

@node New representations,  , Makefiles, Extending MTT
@comment  node-name,  next,  previous,  up
@section New representations
@cindex New representations

It may be convenient to create new representations for @strong{MTT}; in
particular, it is nice to be able to include the result of some
numerical or symbolic computations within an @strong{MTT} report
(@pxref{Report}).

To create a new representation `myrep' in a language `mylang', create a
file with the name
@example
myrep_rep.make
@end example
This file must contain text in `make' syntax. It is executed by
@strong{MTT} and the two arguments `SYS' (the system name) and `LANG'
(the language) are passed to it by @strong{MTT}. Note that @strong{MTT}
cannot know of any prerequisites, but these can be explicitly included in
the makefile (which may include execution of @strong{MTT} itself.

The following example declares the new representation `nppp' which is
created with the Octave script sys_nppp.m where `sys' is the system
name.  This needs a number of files (for exaample `sys_ode2odes.out')
which are themselves created by @strong{MTT}.
@example
# -*-makefile-*-
# Makefile for representation nppp
# File nppp_rep.make

#Copyright (C) 2000 by Peter J. Gawthrop

all: $(SYS)_nppp.$(LANG)

$(SYS)_nppp.view: $(SYS)_nppp.ps
        echo Viewing $(SYS)_nppp.ps; ghostview $(SYS)_nppp.ps&

$(SYS)_nppp.ps: $(SYS)_ode2odes.out s$(SYS)_ode2odes.out \
                $(SYS)_sim.m s$(SYS)_sim.m \
                $(SYS)_state.m $(SYS)_sympar.m $(SYS)_numpar.m  \
                s$(SYS)_state.m s$(SYS)_sympar.m s$(SYS)_numpar.m \
                $(SYS)_sm.m $(SYS)_def.m  s$(SYS)_def.m
        octave $(SYS)_nppp.m

$(SYS)_ode2odes.out: 
        mtt -q -c -stdin $(SYS) ode2odes out

s$(SYS)_ode2odes.out:
        mtt -q -c -stdin -s s$(SYS) ode2odes out

$(SYS)_sim.m:
        mtt -q -c $(SYS) sim m

s$(SYS)_sim.m:
        mtt -q -c -s s$(SYS) sim m

$(SYS)_state.m:
        mtt -q $(SYS) state m

$(SYS)_sympar.m :
        mtt -q $(SYS) sympar m 

$(SYS)_numpar.m:
        mtt -q $(SYS) numpar m

s$(SYS)_state.m:
        mtt -q -s s$(SYS) state m

s$(SYS)_sympar.m :
        mtt -q -s s$(SYS) sympar m 

s$(SYS)_numpar.m:
        mtt -q -s s$(SYS) numpar m

$(SYS)_sm.m:
        mtt -q $(SYS) sm m

$(SYS)_def.m:
        mtt -q $(SYS) def m

s$(SYS)_def.m:
        mtt -q -s s$(SYS) def m

@end example

Future extensions of @strong{MTT} will use such representations stored
in $MTT_REP.

@c      node   next  prev  up
@node   Languages, Language tools, Extending MTT, Top
@chapter Languages
@cindex Languages
@pindex Languages


@c      node   next  prev  up
@menu
* Fig::                         r
* m::                           
* Reduce::                      
* c::                           
@end menu

These are a number of languages used by @strong{MTT} to implement the
various representations.
Each has associated Language tools (@pxref{Language tools}) to
manipulate and/or view the representation.

@ftable @code
@item fig
        @code{Fig} a graphical description language.
@item m
        @code{octave} a high-level interactive language for numerical
        computation.
@item r
        @code{reduce}  a high-level interactive language for symbolic
        computation.
@item tex
        @code{latex} a text processor.
@item dvi
        @code{xdvi} a document viewer.
@item ps
        @code{ghostview} another document viewer.
@item gdat
        @code{gnuplot} a data viewer.
@item c
        @code{gcc} a c compiler.
@end ftable

These tools are automatically invoked as appropriate by @strong{MTT};
but for more advanced use, these tools can be used directly on files
(with the appropriate suffix) generated by @strong{MTT}.



@node   Fig, m, Languages, Languages
@section Fig
@cindex Fig
@pindex Fig
Please see xfig documentation.

@node   m, Reduce, Fig, Languages
@section m
@cindex m
@pindex m
Please see Octave documentation 
@ifhtml
<A HREF="http://www.che.wisc.edu/octave/">Octave</A> documentation.
<A HREF="http://www.mathworks.com/homepage.html">Matlab</A> documentation.
@end ifhtml


@node   Reduce, c, m, Languages
@section Reduce
@cindex Reduce
@pindex Reduce
Please see the reduce documentation.

@node c,  , Reduce, Languages
@comment  node-name,  next,  previous,  up
@section c
@cindex c
@pindex c
Please see the gcc documentation.
@node Language tools, Administration, Languages, Top
@comment  node-name,  next,  previous,  up
@chapter Language tools
@cindex  Language tools

@menu
* Views::                       
* Xfig::                        
* Text editors::                
* Octave::                      
* LaTeX::                       
@end menu

@node Views, Xfig, Language tools, Language tools
@comment  node-name,  next,  previous,  up
@section Views
@cindex views

A number of representations (@pxref{Representations}) have a language
representation which is particularly useful for viewing by the
user. These views are
invoked, where appropriate by the command:
@example
mtt sys rep view
@end example
where @code{sys} is the system name and @code{rep} a corresponding representation.

@node Xfig, Text editors, Views, Language tools
@comment  node-name,  next,  previous,  up
@section Xfig
@cindex Xfig

@node Text editors, Octave, Xfig, Language tools
@comment  node-name,  next,  previous,  up
@section Text editors
@cindex Text editors
All representations live in text files and thus may be edited using your
favourite text editor; however, the Fig (@pxref{Fig}) representation is
pretty meaningless in this form and so you should use Xfig
(@pxref{Xfig}) for representation in this language.

Its up to you which text editor to use. I recommend emacs, but simpler
(and less powerful) editors such as xedit, textedit and vi are also ok.

I usually run @strong{MTT} out of an emacs shell window and keep the
rest of the files in emacs buffers.

@node Octave, LaTeX, Text editors, Language tools
@comment  node-name,  next,  previous,  up
@section Octave
@cindex Octave
@cindex Matlab
@cindex m-files
@cindex Octave interface
@cindex mtt.m

Octave is a numerical matrix-based language @xref{Top,
,Octave,Octave,Octave}.  It is similar to Matlab in many ways. In most
cases, m-files generated by @strong{MTT} can be understood by both
Matlab and Octave (and no doubt other Matlab lookalikes).

 @strong{MTT} provides the octave function @code{mtt}. The octave
 command
@example
help mtt
@end example
gives the following information:
@example
 usage:  mtt (system[,representation,language])

 Invokes mtt from octave to generate system_representation.language
 Ie equivalent to "mtt system representation language" at the shell
 Representation and language defualt to "sm" and "m" respectively

@end example

Thus for example, if octave is in the directory containing the system
rc the following session generates the state matrices of the system "rc"
with the defaut capacitance but resitance r=0.1.
@example
octave> mtt("rc");
Creating rc_rbg.m
Creating rc_cmp.m
Creating rc_fig.fig
Creating rc_sabg.fig
Creating rc_alias.txt
Creating rc_alias.m
Creating rc_sub.sh
Creating rc_abg.m
Creating rc_cbg.m (maximise integral causality)
Creating rc_type.sh
Creating rc_ese.r
Creating rc_def.r
Creating rc_struc.txt
Creating rc_rdae.r
Creating rc_subs.r
Creating rc_cr.txt
Creating rc_cr.r
Copying CR SS to here from
Copying CR lin to here from
Creating rc_dae.r
Creating rc_sympar.txt
Creating rc_sympar.r
Creating rc_cse.r
Creating rc_sspar.r
Creating rc_csm.r
Creating rc_ode.r
Creating rc_ss.r
Creating rc_sm.r
Creating rc_switch.txt
0 switches found
Creating rc_sympars.txt
Creating rc_sm.m
Copying rc_sm.m
octave> mtt("rc","numpar");
Creating rc_numpar.txt
Creating rc_numpar.m
Copying rc_numpar.m
octave> mtt("rc","sympar");
Creating rc_sympar.m
Copying rc_sympar.m
octave> par = rc_numpar
par =

  1
  1

octave> sym = rc_sympar;

octave> par(sym.r) = 0.1;
octave> [A,B,C,D] = rc_sm(par)
A = -10

B = 10

C = 1

D = 0

octave> 
@end example
generates the data structure rc corresponding the the bond graph of the
system called `rc'.
The following octave commands then generate the step reponse and bode
diagram respectively:
@example
step(rc);
bode(rc);
@end example


@menu
* Octave control system toolbox (OCST)::  
@end menu

@node Octave control system toolbox (OCST),  , Octave, Octave
@comment  node-name,  next,  previous,  up
@subsection Octave control system toolbox (OCST)
@cindex Octave
@cindex toolbox
@cindex OCST
@cindex control systems
@cindex mtt2sys

@strong{MTT} provides an interface to the Octave control system toolbox
(OCST) using the mfile @code{mtt2sys}. the octave command
@example
help mtt2sys
@end example
gives the following information.
@example
 usage:  sys = mtt2sys (Name[,par])

 Creates a sys structure for the Octave Control Systems Toolbox
 from an MTT system with name "Name"
 Optional second argument is system parameter list
 Assumes that Name_sm.m, Name_struc.m and Name_numpar.m exist
@end example

Thus for example, if octave is in the directory containing the system
rc:
@example
rc = mtt2sys("rc");
@end example
generates the data structure rc corresponding the the bond graph of the
system called `rc'.
The following octave commands then generate the step reponse and bode
diagram respectively:
@example
step(rc);
bode(rc);
@end example

 

@node LaTeX,  , Octave, Language tools
@comment  node-name,  next,  previous,  up
@section LaTeX
@cindex LaTeX

LaTeX is a powerful text processor which @strong{MTT} uses to provide
visual output.

@node Administration, Glossary, Language tools, Top
@comment  node-name,  next,  previous,  up
@chapter  Administration
@cindex  Administration

@menu
* Software components::         
* REDUCE setup::                
* Octave setup::                
* Paths::                       
* File structure::              
@end menu

@node Software components, REDUCE setup, Administration, Administration
@comment  node-name,  next,  previous,  up
@section  Software components
@cindex  Software components

@strong{MTT} is built from a set of readily-available  software tools.
These are:
@itemize @bullet
@item General purpose software tools.
@item Octave (@pxref{Octave setup})
@item REDUCE  (@pxref{REDUCE setup})
@end itemize

The General purpose tools are (these will all be available with a
standard Linux distribution):
@vtable @code
@item sh
        Bourne shell
@item gmake
        Gnu make
@item gawk
        Gnu awk
@item sed
        Gnu sed
@item grep
        Gnu grep
@item comm
        Gnu Compare sorted files by line
@item xfig
        Figure editor, version 3 or greater.        
@item fig2dev
        Fig file conversion, version 3 or greater. 
@item ghostview
        postscript viewer
@item xdvi
        dvi viewer
@item dvips
        dvi to postscript conversion
@item latex
        the text processor (LaTeX2e needed)
@item latex2html
        converts latex to html
@item perl
        needed for latex2html
@item gnuplot
        a graph plotting program
@item gnuscape
        or other web/html browser such as netscape, Red Baron etc.
@item gcc
        GNU c compiler
@end vtable

@ifhtml
<A HREF="http://home.pages.de/~GNU/">GNU</A> documentation.
@end ifhtml



@node REDUCE setup, Octave setup, Software components, Administration
@comment  node-name,  next,  previous,  up
@section  REDUCE setup
@cindex REDUCE setup

Symbolic algebra is performed by REDUCE, which although not free
software is the the result of international collaboration. The version I
use is obtained from:
@quotation
ZIB ( http://www.zib.de )
@end quotation
@ifhtml
<A HREF="http://www.rrz.uni-koeln.de/REDUCE/">REDUCE</A> documentation.
<A HREF="http://www.zib.de">ZIB</A> documentation.
@end ifhtml

@node Octave setup, Paths, REDUCE setup, Administration
@comment  node-name,  next,  previous,  up
@section Octave setup
@cindex  Octave setup

Octave is available at various web sites including:
@quotation

@end quotation

@menu
* .octaverc::                   
@end menu

@node .octaverc,  , Octave setup, Octave setup
@comment  node-name,  next,  previous,  up
@subsection .octaverc
@vindex  .octaverc


The @file{.octaverc} file should contain the following lines:
@example
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% Startup file for Octave for use with MTT
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

implicit_str_to_num_ok = 1;
empty_list_elements_ok = 1;

@end example

@node Paths, File structure, Octave setup, Administration
@comment  node-name,  next,  previous,  up
@section Paths
@cindex paths
@cindex mttrc

There are a number of paths that must be set correctely for @strong{MTT}
to work. These are normally set up by sourcing the file @code{mttrc} that
lives in the @strong{MTT} home directory.

@menu
* $MTTPATH::                    
* $MTT_COMPONENTS::             
* $MTT_CRS::                    
* $MTT_EXAMPLES::               
* $OCTAVE_PATH::                
@end menu

@node $MTTPATH, $MTT_COMPONENTS, Paths, Paths
@comment  node-name,  next,  previous,  up
@subsection $MTTPATH
@vindex $MTTPATH
The environment variable $MTTPATH points to the mtt home directory.
This is usually @code{/usr/local/lib/mtt}.

@node $MTT_COMPONENTS, $MTT_CRS, $MTTPATH, Paths
@comment  node-name,  next,  previous,  up
@subsection $MTT_COMPONENTS
@vindex $MTT_COMPONENTS
The environment variable $MTT_COMPONENTS is a colon-separated path
pointing to directories containing components and subsystems.
By default
@example
MTT_COMPONENTS=$MTTPATH/lib/comp
@end example
but you may wish to add your own component libraries:
@example
MTT_COMPONENTS=my_library_path:$MTT_COMPONENTS
@end example

@node $MTT_CRS, $MTT_EXAMPLES, $MTT_COMPONENTS, Paths
@comment  node-name,  next,  previous,  up
@subsection $MTT_CRS
@vindex $MTT_CRS
The environment variable $MTT_CRS is a colon-separated path
pointing to directories containing constitutive relationships.
By default
@example
MTT_CRS=$MTTPATH/lib/cr
@end example
but you may wish to add your own component libraries:
@example
MTT_CRS=my_cr_path:$MTT_CRS
@end example

@node $MTT_EXAMPLES, $OCTAVE_PATH, $MTT_CRS, Paths
@comment  node-name,  next,  previous,  up
@subsection $MTT_EXAMPLES
@vindex $MTT_EXAMPLES
The environment variable $MTT_EXAMPLES is a colon-separated path
pointing to directories containing EXAMPLES and subsystems.
By default
@example
MTT_EXAMPLES=$MTTPATH/lib/examples
@end example
but you may wish to add your own component libraries:
@example
MTT_EXAMPLES=my_examples_path:$MTT_EXAMPLES
@end example

@node $OCTAVE_PATH,  , $MTT_EXAMPLES, Paths
@comment  node-name,  next,  previous,  up
@subsection $OCTAVE_PATH
@vindex $OCTAVE_PATH

The @code{$OCTAVE_PATH} path must include the relevant paths for mtt to
work properly. In particular, it must include:
@example
$MTTPATH/trans/m
$MTTPATH/lib/comp/simple
$MTTPATH/lib/comp/compound
@end example

@node File structure,  , Paths, Administration
@comment  node-name,  next,  previous,  up
@section  File structure
@cindex File structure
The recommended installation of @strong{MTT} uses the following
directory structure with corresponding contents. Normally, each of the
listed directories is a subdirectory of @file{/usr/local}. The directory
@code{mtt} is pointed to by $MTTPATH (@pxref{$MTTPATH}).

@vtable @file
@item mtt
        This is the home directory for @strong{MTT}. @strong{MTT}  itself lives
        here along with @file{mttrc}.
@item mtt/trans
        The transformations executed by @strong{MTT}.
@item mtt/trans/m
        The  @code{m-files} associated with the transformations.
@item mtt/trans/awk
        The  @code{awk} scripts associated with the transformations.
@item mtt/lib
        The place for components, examples and CRs which will be updated.
@item mtt/lib/comp/simple
@cindex simple components
        The  @code{m-files} defining the simple components.
@cindex compound components
@item mtt/lib/comp/compound
        The  @code{m-files} defining the compound components.
@item mtt/lib/cr/r
        constitutive relationship definitions
@item mtt/lib/examples
        Some examples. 
@item mtt/examples/metamodelling
        Examples from the book.
@item mtt/doc
        The  documentation files for @strong{MTT}.
@item mtt/doc/Examples
        Examples used in the documentation.
@end vtable

@node Glossary, Index, Administration, Top
@comment  node-name,  next,  previous,  up
@unnumbered Glossary
@printindex fn

@node Index,  , Glossary, Top
@comment      node-name, next,       previous, up
@unnumbered Index
@printindex cp

@contents

@bye

  ###################################### 
  ##### Model Transformation Tools #####
  ######################################
  
  ###############################################################
  ## Version control history
  ###############################################################
  ## $Id$
  ## $Log$
  ###############################################################