# The "checkoutlist" file is used to support additional version controlled
# administrative files in $CVSROOT/CVSROOT, such as template files.
#
# The first entry on a line is a filename which will be checked out from
# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
# The remainder of the line is an error message to use if the file cannot
# be checked out.
#
# File format:
#
#	[<whitespace>]<filename><whitespace><error message><end-of-line>
#
# comment lines begin with '#'
syncmail

# The "commitinfo" file is used to control pre-commit checks.
# The filter on the right is invoked with the repository and a list 
# of files to check.  A non-zero exit of the filter program will 
# cause the commit to be aborted.
#
# The first entry on a line is a regular expression which is tested
# against the directory that the change is being committed to, relative
# to the $CVSROOT.  For the first match that is found, then the remainder
# of the line is the name of the filter to run.
#
# If the repository name does not match any of the regular expressions in this
# file, the "DEFAULT" line is used, if it is specified.
#
# If the name "ALL" appears as a regular expression it is always used
# in addition to the first matching regex or "DEFAULT".

# Set this to "no" if pserver shouldn't check system users/passwords
#SystemAuth=no

# Set `PreservePermissions' to `yes' to save file status information
# in the repository.
#PreservePermissions=no

# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top
# level of the new working directory when using the `cvs checkout'
# command.
#TopLevelAdmin=no

# This file affects handling of files based on their names.
#
# The -t/-f options allow one to treat directories of files
# as a single file, or to transform a file in other ways on
# its way in and out of CVS.
#
# The -m option specifies whether CVS attempts to merge files.
#
# The -k option specifies keyword expansion (e.g. -kb for binary).
#
# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
#
#  wildcard	[option value][option value]...
#
#  where option is one of
#  -f		from cvs filter		value: path to filter
#  -t		to cvs filter		value: path to filter
#  -m		update methodology	value: MERGE or COPY
#  -k		expansion mode		value: b, o, kkv, &c
#
#  and value is a single-quote delimited value.
# For example:
#*.gif -k 'b'

# The "editinfo" file is used to allow verification of logging
# information.  It works best when a template (as specified in the
# rcsinfo file) is provided for the logging procedure.  Given a
# template with locations for, a bug-id number, a list of people who
# reviewed the code before it can be checked in, and an external
# process to catalog the differences that were code reviewed, the
# following test can be applied to the code:
#
#   Making sure that the entered bug-id number is correct.
#   Validating that the code that was reviewed is indeed the code being
#       checked in (using the bug-id number or a seperate review
#       number to identify this particular code set.).
#
# If any of the above test failed, then the commit would be aborted.
#
# Actions such as mailing a copy of the report to each reviewer are
# better handled by an entry in the loginfo file.
#
# One thing that should be noted is the the ALL keyword is not
# supported.  There can be only one entry that matches a given
# repository.

# The "loginfo" file controls where "cvs commit" log information
# is sent.  The first entry on a line is a regular expression which must match
# the directory that the change is being made to, relative to the
# $CVSROOT.  If a match is found, then the remainder of the line is a filter
# program that should expect log information on its standard input.
#
# If the repository name does not match any of the regular expressions in this
# file, the "DEFAULT" line is used, if it is specified.
#
# If the name ALL appears as a regular expression it is always used
# in addition to the first matching regex or DEFAULT.
#
# You may specify a format string as part of the
# filter.  The string is composed of a `%' followed
# by a single format character, or followed by a set of format
# characters surrounded by `{' and `}' as separators.  The format
# characters are:
#
#   s = file name
#   V = old version number (pre-checkin)
#   v = new version number (post-checkin)
#
# For example:
#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog
# or
#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog

# Lines to mail changes
CVSROOT $CVSROOT/CVSROOT/syncmail %{sVv} gawthrop@users.sourceforge.net
DEFAULT $CVSROOT/CVSROOT/syncmail %{sVv} mtt-checkins@lists.sourceforge.net

# Three different line formats are valid:
#	key	-a    aliases...
#	key [options] directory
#	key [options] directory files...
#
# Where "options" are composed of:
#	-i prog		Run "prog" on "cvs commit" from top-level of module.
#	-o prog		Run "prog" on "cvs checkout" of module.
#	-e prog		Run "prog" on "cvs export" of module.
#	-t prog		Run "prog" on "cvs rtag" of module.
#	-u prog		Run "prog" on "cvs update" of module.
#	-d dir		Place module in directory "dir" instead of module name.
#	-l		Top-level directory only -- do not recurse.
#
# NOTE:  If you change any of the "Run" options above, you'll have to
# release and re-checkout any working directories of these modules.
#
# And "directory" is a path to a directory relative to $CVSROOT.
#
# The "-a" option specifies an alias.  An alias is interpreted as if
# everything on the right of the "-a" had been typed on the command line.
#
# You can encode a module within a module by using the special '&'
# character to interpose another module into the current module.  This
# can be useful for creating a module that consists of many directories
# spread out over the entire source repository.

# The "notify" file controls where notifications from watches set by
# "cvs watch add" or "cvs edit" are sent.  The first entry on a line is
# a regular expression which is tested against the directory that the
# change is being made to, relative to the $CVSROOT.  If it matches,
# then the remainder of the line is a filter program that should contain
# one occurrence of %s for the user to notify, and information on its
# standard input.
#
# "ALL" or "DEFAULT" can be used in place of the regular expression.
#
# For example:
#ALL mail %s -s "CVS notification"

# The "rcsinfo" file is used to control templates with which the editor
# is invoked on commit and import.
#
# The first entry on a line is a regular expression which is tested
# against the directory that the change is being made to, relative to the
# $CVSROOT.  For the first match that is found, then the remainder of the
# line is the name of the file that contains the template.
#
# If the repository name does not match any of the regular expressions in this
# file, the "DEFAULT" line is used, if it is specified.
#
# If the name "ALL" appears as a regular expression it is always used
# in addition to the first matching regex or "DEFAULT".

#! /usr/bin/python

# NOTE: Until SourceForge installs a modern version of Python on the cvs
# servers, this script MUST be compatible with Python 1.5.2.

"""Complicated notification for CVS checkins.

This script is used to provide email notifications of changes to the CVS
repository.  These email changes will include context diffs of the changes.
Really big diffs will be trimmed.

This script is run from a CVS loginfo file (see $CVSROOT/CVSROOT/loginfo).  To
set this up, create a loginfo entry that looks something like this:

    mymodule /path/to/this/script %%s some-email-addr@your.domain

In this example, whenever a checkin that matches `mymodule' is made, this
script is invoked, which will generate the diff containing email, and send it
to some-email-addr@your.domain.

    Note: This module used to also do repository synchronizations via
    rsync-over-ssh, but since the repository has been moved to SourceForge,
    this is no longer necessary.  The syncing functionality has been ripped
    out in the 3.0, which simplifies it considerably.  Access the 2.x versions
    to refer to this functionality.  Because of this, the script is misnamed.

It no longer makes sense to run this script from the command line.  Doing so
will only print out this usage information.

Usage:

    %(PROGRAM)s [options] <%%S> email-addr [email-addr ...]

Where options are:

    --cvsroot=<path>
    	Use <path> as the environment variable CVSROOT.  Otherwise this
    	variable must exist in the environment.

    --context=#
    -C #
        Include # lines of context around lines that differ (default: 2).

    -c
        Produce a context diff (default).

    -u
        Produce a unified diff (smaller).

    --quiet / -q
        Don't print as much status to stdout.

    --fromhost=hostname
    -f hostname
        The hostname that email messages appear to be coming from.  The From:
        header will of the outgoing message will look like user@hostname.  By
        default, hostname is the machine's fully qualified domain name.

    --help / -h
        Print this text.

The rest of the command line arguments are:

    <%%S>
        CVS %%s loginfo expansion.  When invoked by CVS, this will be a single
        string containing the directory the checkin is being made in, relative
        to $CVSROOT, followed by the list of files that are changing.  If the
        %%s in the loginfo file is %%{sVv}, context diffs for each of the
        modified files are included in any email messages that are generated.

    email-addrs
        At least one email address.
"""
import os
import sys
import re
import time
import string
import getopt
import smtplib
import pwd
import socket

try:
    from socket import getfqdn
except ImportError:
    def getfqdn():
        # Python 1.5.2 :(
        hostname = socket.gethostname()
        byaddr = socket.gethostbyaddr(socket.gethostbyname(hostname))
        aliases = byaddr[1]
        aliases.insert(0, byaddr[0])
        aliases.insert(0, hostname)
        for fqdn in aliases:
            if '.' in fqdn:
                break
        else:
            fqdn = 'localhost.localdomain'
        return fqdn
    

from cStringIO import StringIO

# Which SMTP server to do we connect to?  Empty string means localhost.
MAILHOST = ''
MAILPORT = 25

# Diff trimming stuff
DIFF_HEAD_LINES = 20
DIFF_TAIL_LINES = 20
DIFF_TRUNCATE_IF_LARGER = 1000

EMPTYSTRING = ''
SPACE = ' '
DOT = '.'
COMMASPACE = ', '

PROGRAM = sys.argv[0]

BINARY_EXPLANATION_LINES = [
    "(This appears to be a binary file; contents omitted.)\n"
    ]

REVCRE = re.compile("^(NONE|[0-9.]+)$")
NOVERSION = "Couldn't generate diff; no version number found in filespec: %s"
BACKSLASH = "Couldn't generate diff: backslash in filespec's filename: %s"



def usage(code, msg=''):
    print __doc__ % globals()
    if msg:
        print msg
    sys.exit(code)



def calculate_diff(filespec, contextlines):
    file, oldrev, newrev = string.split(filespec, ',')
    # Make sure we can find a CVS version number
    if not REVCRE.match(oldrev):
        return NOVERSION % filespec
    if not REVCRE.match(newrev):
        return NOVERSION % filespec

    if string.find(file, '\\') <> -1:
        # I'm sorry, a file name that contains a backslash is just too much.
        # XXX if someone wants to figure out how to escape the backslashes in
        # a safe way to allow filenames containing backslashes, this is the
        # place to do it.  --Zooko 2002-03-17
        return BACKSLASH % filespec

    if string.find(file, "'") <> -1:
        # Those crazy users put single-quotes in their file names!  Now we
        # have to escape everything that is meaningful inside double-quotes.
        filestr = string.replace(file, '`', '\`')
        filestr = string.replace(filestr, '"', '\"')
        filestr = string.replace(filestr, '$', '\$')
        # and quote it with double-quotes.
        filestr = '"' + filestr + '"'
    else:
        # quote it with single-quotes.
        filestr = "'" + file + "'"
    if oldrev == 'NONE':
        try:
            if os.path.exists(file):
                fp = open(file)
            else:
                update_cmd = "cvs -fn update -r %s -p %s" % (newrev, filestr)
                fp = os.popen(update_cmd)
            lines = fp.readlines()
            fp.close()
            # Is this a binary file?  Let's look at the first few
            # lines to figure it out:
            for line in lines[:5]:
                for c in string.rstrip(line):
                    if c in string.whitespace:
                        continue
                    if c < ' ' or c > chr(127):
                        lines = BINARY_EXPLANATION_LINES[:]
                        break
            lines.insert(0, '--- NEW FILE: %s ---\n' % file)
        except IOError, e:
            lines = ['***** Error reading new file: ',
                     str(e), '\n***** file: ', file, ' cwd: ', os.getcwd()]
    elif newrev == 'NONE':
        lines = ['--- %s DELETED ---\n' % file]
    else:
        # This /has/ to happen in the background, otherwise we'll run into CVS
        # lock contention.  What a crock.
        if contextlines > 0:
            difftype = "-C " + str(contextlines)
        else:
            difftype = "-u"
        diffcmd = "/usr/bin/cvs -f diff -kk %s --minimal -r %s -r %s %s" \
                  % (difftype, oldrev, newrev, filestr)
        fp = os.popen(diffcmd)
        lines = fp.readlines()
        sts = fp.close()
        # ignore the error code, it always seems to be 1 :(
##        if sts:
##            return 'Error code %d occurred during diff\n' % (sts >> 8)
    if len(lines) > DIFF_TRUNCATE_IF_LARGER:
        removedlines = len(lines) - DIFF_HEAD_LINES - DIFF_TAIL_LINES
        del lines[DIFF_HEAD_LINES:-DIFF_TAIL_LINES]
        lines.insert(DIFF_HEAD_LINES,
                     '[...%d lines suppressed...]\n' % removedlines)
    return string.join(lines, '')



def blast_mail(subject, people, filestodiff, contextlines, fromhost):
    # cannot wait for child process or that will cause parent to retain cvs
    # lock for too long.  Urg!
    if not os.fork():
        # in the child
        # give up the lock you cvs thang!
        time.sleep(2)
        # Create the smtp connection to the localhost
        conn = smtplib.SMTP()
        conn.connect(MAILHOST, MAILPORT)
        user = pwd.getpwuid(os.getuid())[0]
        domain = fromhost or getfqdn()
        author = '%s@%s' % (user, domain)
        s = StringIO()
        sys.stdout = s
        try:
            print '''\
From: %(author)s
To: %(people)s
Subject: %(subject)s
''' % {'author' : author,
       'people' : string.join(people, COMMASPACE),
       'subject': subject,
       }
            s.write(sys.stdin.read())
            # append the diffs if available
            print
            for file in filestodiff:
                print calculate_diff(file, contextlines)
        finally:
            sys.stdout = sys.__stdout__
        resp = conn.sendmail(author, people, s.getvalue())
        conn.close()
        os._exit(0)



# scan args for options
def main():
    try:
        opts, args = getopt.getopt(
            sys.argv[1:], 'hC:cuqf:',
            ['fromhost=', 'context=', 'cvsroot=', 'help', 'quiet'])
    except getopt.error, msg:
        usage(1, msg)

    # parse the options
    contextlines = 2
    verbose = 1
    fromhost = None
    for opt, arg in opts:
        if opt in ('-h', '--help'):
            usage(0)
        elif opt == '--cvsroot':
            os.environ['CVSROOT'] = arg
        elif opt in ('-C', '--context'):
            contextlines = int(arg)
        elif opt == '-c':
            if contextlines <= 0:
                contextlines = 2
        elif opt == '-u':
            contextlines = 0
        elif opt in ('-q', '--quiet'):
            verbose = 0
        elif opt in ('-f', '--fromhost'):
            fromhost = arg

    # What follows is the specification containing the files that were
    # modified.  The argument actually must be split, with the first component
    # containing the directory the checkin is being made in, relative to
    # $CVSROOT, followed by the list of files that are changing.
    if not args:
        usage(1, 'No CVS module specified')
    subject = args[0]
    specs = string.split(args[0])
    del args[0]

    # The remaining args should be the email addresses
    if not args:
        usage(1, 'No recipients specified')

    # Now do the mail command
    people = args

    if verbose:
        print 'Mailing %s...' % string.join(people, COMMASPACE)

    if specs == ['-', 'Imported', 'sources']:
        return
    if specs[-3:] == ['-', 'New', 'directory']:
        del specs[-3:]
    elif len(specs) > 2:
        L = specs[:2]
        for s in specs[2:]:
            prev = L[-1]
            if string.count(prev, ',') < 2:
                L[-1] = "%s %s" % (prev, s)
            else:
                L.append(s)
        specs = L

    if verbose:
        print 'Generating notification message...'
    blast_mail(subject, people, specs[1:], contextlines, fromhost)
    if verbose:
        print 'Generating notification message... done.'



if __name__ == '__main__':
    main()
    sys.exit(0)

# The "taginfo" file is used to control pre-tag checks.
# The filter on the right is invoked with the following arguments:
#
# $1 -- tagname
# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
# $3 -- repository
# $4->  file revision [file revision ...]
#
# A non-zero exit of the filter program will cause the tag to be aborted.
#
# The first entry on a line is a regular expression which is tested
# against the directory that the change is being committed to, relative
# to the $CVSROOT.  For the first match that is found, then the remainder
# of the line is the name of the filter to run.
#
# If the repository name does not match any of the regular expressions in this
# file, the "DEFAULT" line is used, if it is specified.
#
# If the name "ALL" appears as a regular expression it is always used
# in addition to the first matching regex or "DEFAULT".

# The "verifymsg" file is used to allow verification of logging
# information.  It works best when a template (as specified in the
# rcsinfo file) is provided for the logging procedure.  Given a
# template with locations for, a bug-id number, a list of people who
# reviewed the code before it can be checked in, and an external
# process to catalog the differences that were code reviewed, the
# following test can be applied to the code:
#
#   Making sure that the entered bug-id number is correct.
#   Validating that the code that was reviewed is indeed the code being
#       checked in (using the bug-id number or a seperate review
#       number to identify this particular code set.).
#
# If any of the above test failed, then the commit would be aborted.
#
# Actions such as mailing a copy of the report to each reviewer are
# better handled by an entry in the loginfo file.
#
# One thing that should be noted is the the ALL keyword is not
# supported.  There can be only one entry that matches a given
# repository.

# The "checkoutlist" file is used to support additional version controlled
# administrative files in $CVSROOT/CVSROOT, such as template files.
#
# The first entry on a line is a filename which will be checked out from
# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
# The remainder of the line is an error message to use if the file cannot
# be checked out.
#
# File format:
#
#	[<whitespace>]<filename><whitespace><error message><end-of-line>
#
# comment lines begin with '#'
syncmail

# The "commitinfo" file is used to control pre-commit checks.
# The filter on the right is invoked with the repository and a list 
# of files to check.  A non-zero exit of the filter program will 
# cause the commit to be aborted.
#
# The first entry on a line is a regular expression which is tested
# against the directory that the change is being committed to, relative
# to the $CVSROOT.  For the first match that is found, then the remainder
# of the line is the name of the filter to run.
#
# If the repository name does not match any of the regular expressions in this
# file, the "DEFAULT" line is used, if it is specified.
#
# If the name "ALL" appears as a regular expression it is always used
# in addition to the first matching regex or "DEFAULT".

# Set this to "no" if pserver shouldn't check system users/passwords
#SystemAuth=no

# Set `PreservePermissions' to `yes' to save file status information
# in the repository.
#PreservePermissions=no

# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top
# level of the new working directory when using the `cvs checkout'
# command.
#TopLevelAdmin=no

# This file affects handling of files based on their names.
#
# The -t/-f options allow one to treat directories of files
# as a single file, or to transform a file in other ways on
# its way in and out of CVS.
#
# The -m option specifies whether CVS attempts to merge files.
#
# The -k option specifies keyword expansion (e.g. -kb for binary).
#
# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
#
#  wildcard	[option value][option value]...
#
#  where option is one of
#  -f		from cvs filter		value: path to filter
#  -t		to cvs filter		value: path to filter
#  -m		update methodology	value: MERGE or COPY
#  -k		expansion mode		value: b, o, kkv, &c
#
#  and value is a single-quote delimited value.
# For example:
#*.gif -k 'b'

# The "editinfo" file is used to allow verification of logging
# information.  It works best when a template (as specified in the
# rcsinfo file) is provided for the logging procedure.  Given a
# template with locations for, a bug-id number, a list of people who
# reviewed the code before it can be checked in, and an external
# process to catalog the differences that were code reviewed, the
# following test can be applied to the code:
#
#   Making sure that the entered bug-id number is correct.
#   Validating that the code that was reviewed is indeed the code being
#       checked in (using the bug-id number or a seperate review
#       number to identify this particular code set.).
#
# If any of the above test failed, then the commit would be aborted.
#
# Actions such as mailing a copy of the report to each reviewer are
# better handled by an entry in the loginfo file.
#
# One thing that should be noted is the the ALL keyword is not
# supported.  There can be only one entry that matches a given
# repository.

# The "loginfo" file controls where "cvs commit" log information
# is sent.  The first entry on a line is a regular expression which must match
# the directory that the change is being made to, relative to the
# $CVSROOT.  If a match is found, then the remainder of the line is a filter
# program that should expect log information on its standard input.
#
# If the repository name does not match any of the regular expressions in this
# file, the "DEFAULT" line is used, if it is specified.
#
# If the name ALL appears as a regular expression it is always used
# in addition to the first matching regex or DEFAULT.
#
# You may specify a format string as part of the
# filter.  The string is composed of a `%' followed
# by a single format character, or followed by a set of format
# characters surrounded by `{' and `}' as separators.  The format
# characters are:
#
#   s = file name
#   V = old version number (pre-checkin)
#   v = new version number (post-checkin)
#
# For example:
#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog
# or
#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog

# Lines to mail changes
CVSROOT $CVSROOT/CVSROOT/syncmail %{sVv} mtt@gawthrop.net
DEFAULT $CVSROOT/CVSROOT/syncmail %{sVv} mtt-cvs@lists.sourceforge.net

# Three different line formats are valid:
#	key	-a    aliases...
#	key [options] directory
#	key [options] directory files...
#
# Where "options" are composed of:
#	-i prog		Run "prog" on "cvs commit" from top-level of module.
#	-o prog		Run "prog" on "cvs checkout" of module.
#	-e prog		Run "prog" on "cvs export" of module.
#	-t prog		Run "prog" on "cvs rtag" of module.
#	-u prog		Run "prog" on "cvs update" of module.
#	-d dir		Place module in directory "dir" instead of module name.
#	-l		Top-level directory only -- do not recurse.
#
# NOTE:  If you change any of the "Run" options above, you'll have to
# release and re-checkout any working directories of these modules.
#
# And "directory" is a path to a directory relative to $CVSROOT.
#
# The "-a" option specifies an alias.  An alias is interpreted as if
# everything on the right of the "-a" had been typed on the command line.
#
# You can encode a module within a module by using the special '&'
# character to interpose another module into the current module.  This
# can be useful for creating a module that consists of many directories
# spread out over the entire source repository.

# The "notify" file controls where notifications from watches set by
# "cvs watch add" or "cvs edit" are sent.  The first entry on a line is
# a regular expression which is tested against the directory that the
# change is being made to, relative to the $CVSROOT.  If it matches,
# then the remainder of the line is a filter program that should contain
# one occurrence of %s for the user to notify, and information on its
# standard input.
#
# "ALL" or "DEFAULT" can be used in place of the regular expression.
#
# For example:
#ALL mail %s -s "CVS notification"

# The "rcsinfo" file is used to control templates with which the editor
# is invoked on commit and import.
#
# The first entry on a line is a regular expression which is tested
# against the directory that the change is being made to, relative to the
# $CVSROOT.  For the first match that is found, then the remainder of the
# line is the name of the file that contains the template.
#
# If the repository name does not match any of the regular expressions in this
# file, the "DEFAULT" line is used, if it is specified.
#
# If the name "ALL" appears as a regular expression it is always used
# in addition to the first matching regex or "DEFAULT".

#! /usr/bin/python

# NOTE: Until SourceForge installs a modern version of Python on the cvs
# servers, this script MUST be compatible with Python 1.5.2.

"""Complicated notification for CVS checkins.

This script is used to provide email notifications of changes to the CVS
repository.  These email changes will include context diffs of the changes.
Really big diffs will be trimmed.

This script is run from a CVS loginfo file (see $CVSROOT/CVSROOT/loginfo).  To
set this up, create a loginfo entry that looks something like this:

    mymodule /path/to/this/script %%s some-email-addr@your.domain

In this example, whenever a checkin that matches `mymodule' is made, this
script is invoked, which will generate the diff containing email, and send it
to some-email-addr@your.domain.

    Note: This module used to also do repository synchronizations via
    rsync-over-ssh, but since the repository has been moved to SourceForge,
    this is no longer necessary.  The syncing functionality has been ripped
    out in the 3.0, which simplifies it considerably.  Access the 2.x versions
    to refer to this functionality.  Because of this, the script is misnamed.

It no longer makes sense to run this script from the command line.  Doing so
will only print out this usage information.

Usage:

    %(PROGRAM)s [options] <%%S> email-addr [email-addr ...]

Where options is:

    --cvsroot=<path>
    	Use <path> as the environment variable CVSROOT.  Otherwise this
    	variable must exist in the environment.

    --help / -h
        Print this text.

    --context=#
    -C #
        Include # lines of context around lines that differ (default: 2).

    -c
        Produce a context diff (default).

    -u
        Produce a unified diff (smaller).

    --quiet/-q
        Don't print as much status to stdout.

    <%%S>
        CVS %%s loginfo expansion.  When invoked by CVS, this will be a single
        string containing the directory the checkin is being made in, relative
        to $CVSROOT, followed by the list of files that are changing.  If the
        %%s in the loginfo file is %%{sVv}, context diffs for each of the
        modified files are included in any email messages that are generated.

    email-addrs
        At least one email address.
"""
import os
import sys
import time
import string
import getopt
import smtplib
import pwd
import socket

from cStringIO import StringIO

# Which SMTP server to do we connect to?  Empty string means localhost.
MAILHOST = ''
MAILPORT = 25

# Diff trimming stuff
DIFF_HEAD_LINES = 20
DIFF_TAIL_LINES = 20
DIFF_TRUNCATE_IF_LARGER = 1000

EMPTYSTRING = ''
SPACE = ' '
DOT = '.'
COMMASPACE = ', '

PROGRAM = sys.argv[0]

BINARY_EXPLANATION_LINES = [
    "(This appears to be a binary file; contents omitted.)\n"
    ]


def usage(code, msg=''):
    print __doc__ % globals()
    if msg:
        print msg
    sys.exit(code)



def calculate_diff(filespec, contextlines):
    try:
        file, oldrev, newrev = string.split(filespec, ',')
    except ValueError:
        # No diff to report
        return '***** Bogus filespec: %s' % filespec
    if oldrev == 'NONE':
        try:
            if os.path.exists(file):
                fp = open(file)
            else:
                update_cmd = 'cvs -fn update -r %s -p %s' % (newrev, file)
                fp = os.popen(update_cmd)
            lines = fp.readlines()
            fp.close()
            # Is this a binary file?  Let's look at the first few
            # lines to figure it out:
            for line in lines[:5]:
                for c in string.rstrip(line):
                    if c in string.whitespace:
                        continue
                    if c < ' ' or c > chr(127):
                        lines = BINARY_EXPLANATION_LINES[:]
                        break
            lines.insert(0, '--- NEW FILE: %s ---\n' % file)
        except IOError, e:
            lines = ['***** Error reading new file: ',
                     str(e), '\n***** file: ', file, ' cwd: ', os.getcwd()]
    elif newrev == 'NONE':
        lines = ['--- %s DELETED ---\n' % file]
    else:
        # This /has/ to happen in the background, otherwise we'll run into CVS
        # lock contention.  What a crock.
        if contextlines > 0:
            difftype = "-C " + str(contextlines)
        else:
            difftype = "-u"
        diffcmd = "/usr/bin/cvs -f diff -kk %s --minimal -r %s -r %s '%s'" % (
            difftype, oldrev, newrev, file)
        fp = os.popen(diffcmd)
        lines = fp.readlines()
        sts = fp.close()
        # ignore the error code, it always seems to be 1 :(
##        if sts:
##            return 'Error code %d occurred during diff\n' % (sts >> 8)
    if len(lines) > DIFF_TRUNCATE_IF_LARGER:
        removedlines = len(lines) - DIFF_HEAD_LINES - DIFF_TAIL_LINES
        del lines[DIFF_HEAD_LINES:-DIFF_TAIL_LINES]
        lines.insert(DIFF_HEAD_LINES,
                     '[...%d lines suppressed...]\n' % removedlines)
    return string.join(lines, '')



def getdomain():
    try:
        fqdn = socket.getfqdn()
    except AttributeError:
        # Python 1.5.2 :(
        hostname = socket.gethostname()
        byaddr = socket.gethostbyaddr(socket.gethostbyname(hostname))
        aliases = byaddr[1]
        aliases.insert(0, byaddr[0])
        aliases.insert(0, hostname)
        for fqdn in aliases:
            if '.' in fqdn:
                break
        else:
            fqdn = 'localhost.localdomain'
    parts = string.split(fqdn, DOT)
    return string.join(parts[1:], DOT)



def blast_mail(subject, people, filestodiff, contextlines):
    # cannot wait for child process or that will cause parent to retain cvs
    # lock for too long.  Urg!
    if not os.fork():
        # in the child
        # give up the lock you cvs thang!
        time.sleep(2)
        # Create the smtp connection to the localhost
        conn = smtplib.SMTP()
        conn.connect(MAILHOST, MAILPORT)
        user = pwd.getpwuid(os.getuid())[0]
        domain = getdomain()
        author = '%s@%s' % (user, domain)
        s = StringIO()
        sys.stdout = s
        try:
            print '''\
From: %(author)s
To: %(people)s
Subject: %(subject)s
''' % {'author' : author,
       'people' : string.join(people, COMMASPACE),
       'subject': subject,
       }
            s.write(sys.stdin.read())
            # append the diffs if available
            print
            for file in filestodiff:
                print calculate_diff(file, contextlines)
        finally:
            sys.stdout = sys.__stdout__
        resp = conn.sendmail(author, people, s.getvalue())
        conn.close()
        os._exit(0)



# scan args for options
def main():
    try:
        opts, args = getopt.getopt(sys.argv[1:], 'hC:cuq',
                                   ['context=', 'cvsroot=', 'help', 'quiet'])
    except getopt.error, msg:
        usage(1, msg)

    # parse the options
    contextlines = 2
    verbose = 1
    for opt, arg in opts:
        if opt in ('-h', '--help'):
            usage(0)
        elif opt == '--cvsroot':
            os.environ['CVSROOT'] = arg
        elif opt in ('-C', '--context'):
            contextlines = int(arg)
        elif opt == '-c':
            if contextlines <= 0:
                contextlines = 2
        elif opt == '-u':
            contextlines = 0
        elif opt in ('-q', '--quiet'):
            verbose = 0

    # What follows is the specification containing the files that were
    # modified.  The argument actually must be split, with the first component
    # containing the directory the checkin is being made in, relative to
    # $CVSROOT, followed by the list of files that are changing.
    if not args:
        usage(1, 'No CVS module specified')
    subject = args[0]
    specs = string.split(args[0])
    del args[0]

    # The remaining args should be the email addresses
    if not args:
        usage(1, 'No recipients specified')

    # Now do the mail command
    people = args

    if verbose:
        print 'Mailing %s...' % string.join(people, COMMASPACE)

    if specs == ['-', 'Imported', 'sources']:
        return
    if specs[-3:] == ['-', 'New', 'directory']:
        del specs[-3:]
    elif len(specs) > 2:
        L = specs[:2]
        for s in specs[2:]:
            prev = L[-1]
            if string.count(prev, ',') < 2:
                L[-1] = "%s %s" % (prev, s)
            else:
                L.append(s)
        specs = L

    if verbose:
        print 'Generating notification message...'
    blast_mail(subject, people, specs[1:], contextlines)
    if verbose:
        print 'Generating notification message... done.'



if __name__ == '__main__':
    main()
    sys.exit(0)

# The "taginfo" file is used to control pre-tag checks.
# The filter on the right is invoked with the following arguments:
#
# $1 -- tagname
# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
# $3 -- repository
# $4->  file revision [file revision ...]
#
# A non-zero exit of the filter program will cause the tag to be aborted.
#
# The first entry on a line is a regular expression which is tested
# against the directory that the change is being committed to, relative
# to the $CVSROOT.  For the first match that is found, then the remainder
# of the line is the name of the filter to run.
#
# If the repository name does not match any of the regular expressions in this
# file, the "DEFAULT" line is used, if it is specified.
#
# If the name "ALL" appears as a regular expression it is always used
# in addition to the first matching regex or "DEFAULT".

# The "verifymsg" file is used to allow verification of logging
# information.  It works best when a template (as specified in the
# rcsinfo file) is provided for the logging procedure.  Given a
# template with locations for, a bug-id number, a list of people who
# reviewed the code before it can be checked in, and an external
# process to catalog the differences that were code reviewed, the
# following test can be applied to the code:
#
#   Making sure that the entered bug-id number is correct.
#   Validating that the code that was reviewed is indeed the code being
#       checked in (using the bug-id number or a seperate review
#       number to identify this particular code set.).
#
# If any of the above test failed, then the commit would be aborted.
#
# Actions such as mailing a copy of the report to each reviewer are
# better handled by an entry in the loginfo file.
#
# One thing that should be noted is the the ALL keyword is not
# supported.  There can be only one entry that matches a given
# repository.

# Copyright (C) 2001 by Peter J. Gawthrop

###############################################################
## Version control history
###############################################################
## $Header$
## $Log$
## Revision 1.360  2002/08/20 15:51:16  gawthrop
## Update to work with ident DIY rep
##
## Revision 1.359  2002/08/07 14:27:14  geraint
## Changes to make "-i dassl" work again.
##
## Revision 1.358  2002/08/07 11:04:40  geraint
## Now updates timestamp on lbl.txt after processing in make. This eliminates the delay where MTT spends a long period of time uselessly recursing through the model on subsequent passes if the label file is older than the bondgraph.
##
## Revision 1.357  2002/06/28 10:13:40  geraint

                subsystem="_"$2;
                shift;;
	-oct )
                fixcc='-fixcc'
                mtt_switches="$mtt_switches $1";
                using_oct=yes;
                ;;
	-opt | -optl )
	-opt )  mtt_switches="$mtt_switches $1";
                optimise='-optimise';;
		mtt_switches="$mtt_switches $1";
                optimise='-optimise_local';;
	-optg )
		mtt_switches="$mtt_switches $1";
                optimise='-optimise_global';;
	-partition ) mtt_switches="$mtt_switches $1";
                     partition='-partition';
                ;;
	-pdf )   mtt_switches="$mtt_switches $1";
                 ps=pdf; 
                 eps=pdf;
                 pdf='-pdf';

    echo '         -d  <dir>  use directory <dir>'
    echo '         -dr <dir>  use files contained in <dir>'
    echo '         -dc Maximise derivative (not integral) causality'
    echo '         -i <implicit|euler|rk4|dassl>   Use implicit, euler, rk4 or dassl integration'
    echo '         -ae <reduce|hybrd|dassl|hooke>   Solve algebraic equations with specified solver'
    echo '         -o ode is same as dae'
    echo '         -oct use oct files in place of m files where appropriate'
    echo '         -opt optimise code generation'
    echo '         -opt optimise code generation (equivalent to -lopt)'
    echo '         -optl optimise code generation (local  : line-by-line)'
    echo '         -optg optimise code generation (global : full vector)'
    echo '         -p  print environment variables'
    echo '         -partition partition hierachical system'
    echo '         -pdf generate pdf in place of ps'
    echo '         -r  reset time stamp on representation'
    echo '         -s  generate sensitivity BG (use mtt -s sSys rep lang)'
    echo '         -ss use steady-state info to initialise simulations'
    echo '         -stdin read input data from standard input for  simulations'

# Copyright (c) P.J.Gawthrop, 1991, 1994.

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.3  2001/07/27 23:29:10  geraint
## Optimises only when requested (-opt).
##
## Revision 1.2  2001/07/13 04:54:04  geraint
## Branch merge: numerical-algebraic-solution back to main.
##
## Revision 1.1.4.1  2001/05/04 04:07:24  geraint
## Numerical solution of algebraic equations.
## sys_ae.cc written for unsolved inputs.
## Solution of equations using hybrd from MINPACK (as used by Octave fsolve).

## Initial revision
##
###############################################################

optimise=''; optimise_msg=''
while [ -n "`echo $1 | grep '^-'`" ]; do
    case $1 in
	-optimise)
	    optimise='-optimise'
	    optimise_msg=' with optimisation' ;;
	-optimise_global )
	    optimise='-optimise_global'
	    optimise_msg=' with global optimisation' ;;
	-optimise_local )
	    optimise='-optimise_local'
	    optimise_msg=' with local optimisation' ;;
	*)
	    echo "$1 is an invalid argument - ignoring" ;;
    esac
    shift
done

# Create the reduce output code

OUT "$1_odeo.r";
write "%File: $1_odeo.r";
in ("$1_odeo_write.r");
write "END;";
SHUT "$1_odeo.r";
quit;
EOF

if [ ${optimise:-""} = "-optimise_global" ]; then
    mtt_optimise_global $1 ode
    mtt_optimise_global $1 odeo
fi

# Now invoke the standard error handling.
mtt_error_r cse2ode_r.log

	;;
    -parameters)
	parameters='-parameters';
	;;
    -matrix)
	matrix='yes';
	;;
    -optimise)
    -optimise_global | -optimise_local )
	optimise='LOAD SCOPE; ON GENTRANOPT;';
        iname='INAME mtt_o;';
	;;
    -fixcc )
        fix_mtt_pow='FOR ALL x,y LET x^y = mtt_pow(x,y);'
        operator='OPERATOR mtt_pow;'
        blurb2='fixing c and cc code';

# Copyright (c) P.J.Gawthrop, 1991, 1994, 1996

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.2  2001/07/27 23:29:10  geraint
## Optimises only when requested (-opt).
##
## Revision 1.1  2000/12/28 12:24:03  peterg
## Put under RCS
##
## Revision 1.2  1996/08/25 10:11:32  peter
## Added END in output file.
## Error handling.
##
## Revision 1.1  1996/08/19 15:06:16  peter
## Initial revision
##
###############################################################

optimise=''; optimise_msg=''
while [ -n "`echo $1 | grep '^-'`" ]; do
    case $1 in
	-optimise)
	    optimise='-optimise'
	    optimise_msg=' with optimisation' ;;
	*)
	-optimise_global )
	    optimise='-optimise_global'
	    optimise_msg=' with global optimisation' ;;
       	-optimise_local )
	    optimise='-optimise_local'
	    optimise_msg=' with local optimisation' ;;
	* )
	    echo "$1 is an invalid argument - ignoring" ;;
    esac
    shift
done

# Create the reduce output code
def2write_r $optimise $1 $2

SHUT "$1_$2.r2";
quit;

EOF

cat $1_$2.r1 $1_$2.r2 > $1_$2.r

if [ ${optimise:-""} = "-optimise_global" ]; then
    mtt_optimise_global $1 $2
fi

# Now invoke the standard error handling.
mtt_error_r csm2sm_r.log

# Copyright (c) P.J.Gawthrop 1991, 1992, 1994.

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.23  2002/07/10 17:43:05  geraint
## Added feature [ 562453 ] Optimisation of algebraic equations.
##
## Revision 1.22  2002/06/28 15:35:47  geraint
## Commented out aej.r generation (not used yet).
##
## Revision 1.21  2002/06/28 10:13:40  geraint
## Includes fix_c.r in ese2rdae and def2write_r to eliminate occurrances of x**y.
##
## Revision 1.20.2.1  2002/06/05 11:14:50  geraint

                solve=1
		solve_msg=' with explicit solution of algebraic equations' ;;
	-fixcc )
		fixcc='-fixcc'
                include=`echo 'in "'$MTT_LIB'/reduce/fix_c.r";'`
                fix_msg='fixing c and cc code';
		;;
	-optimise)
	    optimise='-optimise'
	    optimise_msg=' with optimisation' ;;
        -optimise_global )
	    optimise='-optimise_global'
	    optimise_msg=' with global optimisation' ;;
	-optimise_local )
	    optimise='-optimise_local'
	    optimise_msg=' with local optimisation' ;;
        *)
                echo "$1 is an invalid argument - ignoring" ;;
  esac
  shift
done

# Create the reduce output code

touch $1_ae.r1 $1_ae.r2
touch $1_cseo.r1
touch $1_cseo.r2
cat $1_ae.r1 $1_ae.r2 > $1_ae.r
cat $1_cse.r1 $1_cse.r2  > $1_cse.r
cat $1_csex.r1 $1_csex.r2  > $1_csex.r
cat $1_cseo.r1 $1_cseo.r2  > $1_cseo.r

if [ ${optimise:-""} = "-optimise_global" ]; then
    mtt_optimise_global $1 ae
# TODO:    mtt_optimise_global $1 cse
# TODO:    mtt_optimise_global $1 cseo
# TODO:    mtt_optimise_global $1 csex
fi

if [ "$solve" = "1" ]; then
    echo "Setting MTTNyz=0 in $1_def.r and updating other $1_def files"
    gawk '{
     if ($1=="MTTNyz") 
       print "MTTNyz := 0;" 
     else print $0

# Copyright (C) 2000 by Peter J. Gawthrop

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.2  2001/07/27 23:29:10  geraint
## Optimises only when requested (-opt).
##
## Revision 1.1  2000/12/28 12:25:13  peterg
## Initial revision
##
###############################################################

optimise=''; optimise_msg=''
while [ -n "`echo $1 | grep '^-'`" ]; do
    case $1 in
	-optimise)
	    optimise='-optimise'
	    optimise_msg=' with optimisation' ;;
	-optimise_global )
	    optimise='-optimise_global'
	    optimise_msg=' with global optimisation' ;;
	-optimise_local )
	    optimise='-optimise_local'
	    optimise_msg=' with local optimisation' ;;
	*)
	    echo "$1 is an invalid argument - ignoring" ;;
    esac
    shift
done

# Create the reduce output code

OUT "$1_ldeo.r";
write "%File: $1_ldeo.r";
in ("$1_ldeo_write.r");
write "END;";
SHUT "$1_ldeo.r";
quit;
EOF

if [ ${optimise:-""} = "-optimise_global" ]; then
# TODO:    global_optimise $1 lde
# TODO:    global_optimise $1 ldeo
fi

# Now invoke the standard error handling.
mtt_error_r cse2lde_r.log

# Copyright (C) 2000 by Peter J. Gawthrop

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.16  2002/09/03 19:34:15  geraint
## Write EdX regardless - csex is needed to create ode when not optimised.
##
## Revision 1.15  2002/08/29 15:45:20  geraint
## Tests for existence of matrix before entering shell loop.
## Tests for existence of expression before attempting to write or optimise.
##
## Revision 1.14  2002/08/09 14:34:45  geraint
## Fix to prevent numbers being formed with a decimal point in the exponent, Reduce cannot handle these.
##

## Initial revision
##
###############################################################

optimise=''
while [ -n "`echo $1 | grep '^-'`" ]; do
    case $1 in
	-optimise)
	    opt='-optimise'
	    optimise_msg=' with optimisation' ;;
	-optimise_global )
	    opt=''
	    optimise_msg='' ;;
	-optimise_local )
	    opt='-optimise_local'
	    optimise_msg=' with local optimisation' ;;
	-fixcc )
	    include=`echo 'in "'$MTT_LIB'/reduce/fix_c.r";'` ;;
	*)
	    echo "$1 is an invalid argument - ignoring" ;;
    esac
    shift
done

        ms="$Nx $Nu $Nx $Nu"
	;;
    *)
        echo def2write_r: representation $rep not recognised
        exit
esac


mtt_fix_integers ()
{
    gawk -F":=" -v RS="$" -v ORS="$\n" '
(NF == 1) {
	print $0
}
(NF > 1) {
	lhs=$1 ;
	rhs=$2" " ;
	rhs1 = gensub ( /([^A-Za-z_0-9\.\+])([0-9]+)([^\.0-9])/ , "\\1\\2.0\\3" , "g", rhs );
	rhs2 = gensub ( /([^e]\+)([0-9]+)([^\.0-9])/ , "\\1\\2.0\\3" , "g", rhs1 );
	rhs3 = gensub ( /([^A-Za-z_0-9\.\+])([0-9]+)e([0-9]+).0([^\.0-9])/ , "\\1\\2\\3\\4" , "g" , rhs)
	printf "%s:=%s$\n", lhs, rhs3 ;
    }'
}

mtt_optimise ()
mtt_optimise_local ()
{
    sys="$1"
    lhs="$2"
    rhs="$3"
    
    dae="${sys}_dae.r"
    tmp="mtt_optimise.tmp"

# Remove log files
rm -f def2write_r1.log def2write_r2.log

# Write out the code
echo "" > $1_$2_write.r

if [ ${opt:-""} = "-optimise" ]; then
if [ ${opt:-""} = "-optimise_local" ]; then
    echo 'off nat$'
#    echo 'on echo$'
else
    echo 'off echo$'
    echo 'load gentran$'
fi >> $1_$2_write.r

for matrix in $matrices; do
    matrix_exists=`grep -i MTT${matrix} ${sys}_dae.r | wc -l | gawk '{print $1}'`
    if [ "$matrix" = "EdX" -o $matrix_exists -gt 0 ]; then
	n=`first "$ns"`; ns=`rest "$ns"` 
	m=`first "$ms"`; ms=`rest "$ms"`
	is=`n2m 1 $n`; 
	js=`n2m 1 $m`; 
	if [ $n -ge 1 ]; then
	    for i in $is; do
		for j in $js; do
		    if [ ${opt:-""} = "-optimise" ]; then
		    if [ ${opt:-""} = "-optimise_local" ]; then
			name=`echo MTT$matrix'('$i','$j')'`
			mtt_optimise $1 "$comma$name" "$name"
			mtt_optimise_local $1 "$comma$name" "$name"
			comma=''
		    else
			echo 'write'
			name=`echo MTT$matrix'('$i','$j')'`
			echo '  '$comma$name ':=' $name '$'
		    fi >> $1_$2_write.r
		done
	    done
	fi
    fi
done
echo ';END;'                           >>$1_$2_write.r

% %%
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

% Field separator
if nargin<3
  FS = ';';
end;

arg = '';
if strcmp(args, '')==0
  L = length(args);
  args_count = 0;
  for i=1:n
    arg_count = 0;
    arg = '';
    if args_count == L
      break;
    end;  
    while args_count < L
      args_count = args_count+1;
      arg_count = arg_count+1;
      ch = str2ch(args,args_count);
      if ch==FS
	break;
      end;
      arg = [arg ch];
    end;
  end;
end;

#! /bin/sh

mttmatrix='\(mtt[A-Za-z][A-Za-z]*\)'
integer='\([0-9][0-9]*\)'

mtt_join_lines | gawk -v RS=${1:-"$"} -v ORS=${2:-"$\n"} ' {
str = $0;
str1 = gensub ( /([^A-Za-z_0-9\.\+])([0-9]+)([^\.0-9])/ , "\\1\\2.0\\3" , "g", str );
str2 = gensub ( /([^e]\+)([0-9]+)([^\.0-9])/ , "\\1\\2.0\\3" , "g", str1 );
str3 = gensub ( /([^A-Za-z_0-9\.\+])([0-9]+)e([0-9]+).0([^\.0-9])/ , "\\1\\2\\3\\4" , "g" , str2)
printf "%s$\n", str3 ;
}' | sed -e "s/$mttmatrix($integer\.0,/\1(\2,/g"

#! /bin/sh

gawk '{ printf ( "%s" , $0 ) }'		|\
    gawk -v RS="$" '{ printf "%s$\n", $0 }'	|\
    gawk -v RS=";" '{ printf "%s;\n", $0 }'

#! /bin/sh

# script uses Reduce + Scope to optimise an entire vector

system=$1
representation=$2

# error codes
E_REP_NOT_SUPPORTED=-19
E_FILE_NOT_EXIST=-20

case $representation in
    ae)
	matrix=yz ;
	nmatrix=`mtt_getsize $system yz` ;;
    ode)
	matrix=dx ;
	nmatrix=`mtt_getsize $system x` ;;
    cseo | odeo)
	matrix=y ;
	nmatrix=`mtt_getsize $system y` ;;
    *)
	exit $E_REP_NOT_SUPPORTED;;
esac

# Generate a command of the form
# optimise mtt?(1,1) :=: mtt?(1,1), mtt?(2,1) :=: mtt?(2,1), ..., INAME mtt_tmp$
command="optimize"
counter=1
while [ $counter -le $nmatrix ]; do
    command="$command mtt$matrix($counter,1) :=: mtt$matrix($counter,1),"
    counter=`expr $counter + 1`
done
command="$command INAME mtt_tmp$"

logfile=${system}_${representation}_global_optimisation.log
tmpfile=${system}_${representation}_global_optimisation.tmp
outfile=${system}_${representation}.r

if [ ! -f $outfile ]; then
    exit $E_FILE_NOT_EXIST
fi

# Use Reduce to perform the optimisation
${SYMBOLIC:-reduce} <<EOF > $logfile 2>&1
off nat$
in "${system}_def.r"$
matrix mtt$matrix($nmatrix,1)$
in "$outfile"$
load scope$
out "$tmpfile"$
$command
shut "$tmpfile"$
$end$
EOF

cp $outfile $outfile.unoptimised
cp $tmpfile $outfile.tmp
cat $tmpfile | mtt_fix_integers > $outfile
#cp $tmpfile $outfile
echo ";end;" >> $outfile

mtt_error_r $logfile

# Copyright (C) 2000 by Peter J. Gawthrop

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.30  2002/03/26 11:59:54  geraint
## Added dummy -optimise switch to prevent falling over for -cc generation.
##
## Revision 1.29  2001/09/07 00:25:56  geraint
## Partial fix for insidious bug which eliminates lines of code when parameter
## names of the form (in* or off*) start continuation lines.
##
## Revision 1.28  2001/07/13 04:54:04  geraint
## Branch merge: numerical-algebraic-solution back to main.
##

    -noglobals)
	noglobals='-noglobals';
	;;
    -parameters)
	parameters='-parameters';
        par='mttpar'
	;;
    -optimise)
    -optimise_local | -optimise_global )
	;;
    *)
	echo $1 is an unknown option
        exit;;
  esac
  shift
done