# The "checkoutlist" file is used to support additional version controlled
# administrative files in $CVSROOT/CVSROOT, such as template files.
#
# The first entry on a line is a filename which will be checked out from
# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
# The remainder of the line is an error message to use if the file cannot
# be checked out.
#
# File format:
#
#	[<whitespace>]<filename><whitespace><error message><end-of-line>
#
# comment lines begin with '#'

# The "commitinfo" file is used to control pre-commit checks.
# The filter on the right is invoked with the repository and a list 
# of files to check.  A non-zero exit of the filter program will 
# cause the commit to be aborted.
#
# The first entry on a line is a regular expression which is tested
# against the directory that the change is being committed to, relative
# to the $CVSROOT.  For the first match that is found, then the remainder
# of the line is the name of the filter to run.
#
# If the repository name does not match any of the regular expressions in this
# file, the "DEFAULT" line is used, if it is specified.
#
# If the name "ALL" appears as a regular expression it is always used
# in addition to the first matching regex or "DEFAULT".

# Set this to "no" if pserver shouldn't check system users/passwords
#SystemAuth=no

# Set `PreservePermissions' to `yes' to save file status information
# in the repository.
#PreservePermissions=no

# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top
# level of the new working directory when using the `cvs checkout'
# command.
#TopLevelAdmin=no

# This file affects handling of files based on their names.
#
# The -t/-f options allow one to treat directories of files
# as a single file, or to transform a file in other ways on
# its way in and out of CVS.
#
# The -m option specifies whether CVS attempts to merge files.
#
# The -k option specifies keyword expansion (e.g. -kb for binary).
#
# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
#
#  wildcard	[option value][option value]...
#
#  where option is one of
#  -f		from cvs filter		value: path to filter
#  -t		to cvs filter		value: path to filter
#  -m		update methodology	value: MERGE or COPY
#  -k		expansion mode		value: b, o, kkv, &c
#
#  and value is a single-quote delimited value.
# For example:
#*.gif -k 'b'

# The "editinfo" file is used to allow verification of logging
# information.  It works best when a template (as specified in the
# rcsinfo file) is provided for the logging procedure.  Given a
# template with locations for, a bug-id number, a list of people who
# reviewed the code before it can be checked in, and an external
# process to catalog the differences that were code reviewed, the
# following test can be applied to the code:
#
#   Making sure that the entered bug-id number is correct.
#   Validating that the code that was reviewed is indeed the code being
#       checked in (using the bug-id number or a seperate review
#       number to identify this particular code set.).
#
# If any of the above test failed, then the commit would be aborted.
#
# Actions such as mailing a copy of the report to each reviewer are
# better handled by an entry in the loginfo file.
#
# One thing that should be noted is the the ALL keyword is not
# supported.  There can be only one entry that matches a given
# repository.

# The "loginfo" file controls where "cvs commit" log information
# is sent.  The first entry on a line is a regular expression which must match
# the directory that the change is being made to, relative to the
# $CVSROOT.  If a match is found, then the remainder of the line is a filter
# program that should expect log information on its standard input.
#
# If the repository name does not match any of the regular expressions in this
# file, the "DEFAULT" line is used, if it is specified.
#
# If the name ALL appears as a regular expression it is always used
# in addition to the first matching regex or DEFAULT.
#
# You may specify a format string as part of the
# filter.  The string is composed of a `%' followed
# by a single format character, or followed by a set of format
# characters surrounded by `{' and `}' as separators.  The format
# characters are:
#
#   s = file name
#   V = old version number (pre-checkin)
#   v = new version number (post-checkin)
#
# For example:
#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog
# or
#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog

# Three different line formats are valid:
#	key	-a    aliases...
#	key [options] directory
#	key [options] directory files...
#
# Where "options" are composed of:
#	-i prog		Run "prog" on "cvs commit" from top-level of module.
#	-o prog		Run "prog" on "cvs checkout" of module.
#	-e prog		Run "prog" on "cvs export" of module.
#	-t prog		Run "prog" on "cvs rtag" of module.
#	-u prog		Run "prog" on "cvs update" of module.
#	-d dir		Place module in directory "dir" instead of module name.
#	-l		Top-level directory only -- do not recurse.
#
# NOTE:  If you change any of the "Run" options above, you'll have to
# release and re-checkout any working directories of these modules.
#
# And "directory" is a path to a directory relative to $CVSROOT.
#
# The "-a" option specifies an alias.  An alias is interpreted as if
# everything on the right of the "-a" had been typed on the command line.
#
# You can encode a module within a module by using the special '&'
# character to interpose another module into the current module.  This
# can be useful for creating a module that consists of many directories
# spread out over the entire source repository.

# The "notify" file controls where notifications from watches set by
# "cvs watch add" or "cvs edit" are sent.  The first entry on a line is
# a regular expression which is tested against the directory that the
# change is being made to, relative to the $CVSROOT.  If it matches,
# then the remainder of the line is a filter program that should contain
# one occurrence of %s for the user to notify, and information on its
# standard input.
#
# "ALL" or "DEFAULT" can be used in place of the regular expression.
#
# For example:
#ALL mail %s -s "CVS notification"

# The "rcsinfo" file is used to control templates with which the editor
# is invoked on commit and import.
#
# The first entry on a line is a regular expression which is tested
# against the directory that the change is being made to, relative to the
# $CVSROOT.  For the first match that is found, then the remainder of the
# line is the name of the file that contains the template.
#
# If the repository name does not match any of the regular expressions in this
# file, the "DEFAULT" line is used, if it is specified.
#
# If the name "ALL" appears as a regular expression it is always used
# in addition to the first matching regex or "DEFAULT".

# The "taginfo" file is used to control pre-tag checks.
# The filter on the right is invoked with the following arguments:
#
# $1 -- tagname
# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
# $3 -- repository
# $4->  file revision [file revision ...]
#
# A non-zero exit of the filter program will cause the tag to be aborted.
#
# The first entry on a line is a regular expression which is tested
# against the directory that the change is being committed to, relative
# to the $CVSROOT.  For the first match that is found, then the remainder
# of the line is the name of the filter to run.
#
# If the repository name does not match any of the regular expressions in this
# file, the "DEFAULT" line is used, if it is specified.
#
# If the name "ALL" appears as a regular expression it is always used
# in addition to the first matching regex or "DEFAULT".

# The "verifymsg" file is used to allow verification of logging
# information.  It works best when a template (as specified in the
# rcsinfo file) is provided for the logging procedure.  Given a
# template with locations for, a bug-id number, a list of people who
# reviewed the code before it can be checked in, and an external
# process to catalog the differences that were code reviewed, the
# following test can be applied to the code:
#
#   Making sure that the entered bug-id number is correct.
#   Validating that the code that was reviewed is indeed the code being
#       checked in (using the bug-id number or a seperate review
#       number to identify this particular code set.).
#
# If any of the above test failed, then the commit would be aborted.
#
# Actions such as mailing a copy of the report to each reviewer are
# better handled by an entry in the loginfo file.
#
# One thing that should be noted is the the ALL keyword is not
# supported.  There can be only one entry that matches a given
# repository.

# Copyright (C) 2000 by Peter J. Gawthrop

###############################################################
## Version control history
###############################################################
## $Header$
## $Log$
## Revision 1.293  2001/02/06 04:39:08  geraint
## Added _standalone.exe representation.
##
## Revision 1.292  2001/02/05 17:27:40  gawthrop
## Make sure _def.r exists before creating _state.txt
##
## Revision 1.291  2000/12/27 14:50:40  peterg
## This is the first CVS version (4.9).
## Commented out code now deleted
##

fi


if [ -n "$sensitivity" ]; then
  sys=`echo $1 | cut -c 2-`
  sys_abg=$sys"_abg"
fi

## Check octave version
if [ `octave --version | awk -F\. '{print $2}'` ]; then
    define_octave_dev="-DOCTAVE_DEV"
else
    define_octave_dev=""
fi

################################
# This is the main mtt programme
################################


##echo Target is $target, Subsystem is $Subsystem, options are $mtt_switches
$MAKE -S $verbose  -f  -  $target << EOF

# Cancel implicit rules I don't want
%.dvi: %.tex

# MTT implicit rules
## .oct files
ifneq ($2,ode2odes)
%.oct:  %.cc $1_def.h $1_sympar.h $1_cr.h
	echo Creating $1_$2.oct; $MKOCTFILE  $< 
$1_%.oct:  $1_%.cc $1_def.h $1_sympar.h $1_cr.h
	echo Creating $1_\$*.oct; $MKOCTFILE  $1_\$*.cc
endif


## .cc files
.PRECIOUS: %.cc # Don't let mtt delete them
ifneq ($2,ode2odes)
%.cc:  %.m
	mtt_m2cc.sh  $1 $2 cat 
endif
$1_%.cc:  $1_%.m
	mtt_m2cc.sh  $1 \$* cat 

## .o files
.PRECIOUS: $1_%.o
$1_%.o: $1_%.cc $1_def.h $1_sympar.h $1_cr.h
	echo Compiling $1_\$*.cc
	${MTT_CXX} ${MTT_CXXFLAGS} ${MTT_CXXINCS} -c $< -DSTANDALONE

mtt_%.o:: ${MTT_LIB}/cc/mtt_%.cc
	echo Compiling mtt_\$*.cc
	${MTT_CXX} ${MTT_CXXFLAGS} ${MTT_CXXINCS} -c $< -DSTANDALONE $define_octave_dev

# Generates code to write reduce code
$1_ode_write.r: $1_def.m
	def2write_r  $1 $2

ifeq ("$sensitivity","sensitivity")
ifeq ("$level","0")

	mtt_update $1 logic update
else
	mtt_update $1 logic
endif

# Dummy target
FORCE:

ode2odes_common.m    : $1_input.m   $1_logic.m   $1_numpar.m   $1_simpar.m   $1_state.m   ; @echo > /dev/null
ode2odes_common.cc   : $1_input.cc  $1_logic.cc  $1_numpar.cc  $1_simpar.cc  $1_state.cc  ; @echo > /dev/null
ode2odes_common.o    : $1_input.o   $1_logic.o   $1_numpar.o   $1_simpar.o   $1_state.o   ; @echo > /dev/null
ode2odes_common.oct  : $1_input.oct $1_logic.oct $1_numpar.oct $1_simpar.oct $1_state.oct ; @echo > /dev/null
ode2odes_euler.m     : $1_ode.m     $1_odeo.m                                             ; @echo > /dev/null
ode2odes_euler.cc    : $1_ode.cc    $1_odeo.cc                                            ; @echo > /dev/null
ode2odes_euler.o     : $1_ode.o     $1_odeo.o                                             ; @echo > /dev/null
ode2odes_euler.oct   : $1_ode.oct   $1_odeo.oct                                           ; @echo > /dev/null
ode2odes_implicit.m  : $1_cseo.m    $1_csex.m   $1_smxa.m   $1_smxax.m                    ; @echo > /dev/null
ode2odes_implicit.cc : $1_cseo.cc   $1_csex.cc  $1_smxa.cc  $1_smxax.cc                   ; @echo > /dev/null
ode2odes_implicit.o  : $1_cseo.o    $1_csex.o   $1_smxa.o   $1_smxax.o                    ; @echo > /dev/null
ode2odes_implicit.oct: $1_cseo.oct  $1_csex.oct $1_smxa.oct $1_smxax.oct                  ; @echo > /dev/null


#SUMMARY numpar	numerical parameter declaration (m) 
$1_numpar.m:  $1_numpar.txt $1_sympars.txt
	mtt_txt2m $1 numpar

#SUMMARY numpar	numerical parameter declaration (c) 
#SUMMARY numpar	numerical parameter declaration (view) 

	touch $1_aliased.txt
$1_struc.tex: $1_struc.txt
	struc_txt2tex $1
$1_struc.m: $1_struc.txt 
	struc_txt2m $1
$1_def.m: $1_def.r
	def_r2m $1; matlab_tidy $1_def.m;
$1_def.h: $1_def.m
$1_def.h: $1_def.m $1_sympar.txt
	def_m2h.sh $1

#SUMMARY rdae	raw differential-algebraic equations (r)
#SUMMARY dae	differential-algebraic equations (r)
#SUMMARY dae*	differential-algebraic equations (m)
#SUMMARY dae	differential-algebraic equations (tex)
#SUMMARY dae*	differential-algebraic equations (view)

# The main simulation programme
ifeq ($integration_method,implicit)
$1_ode2odes.m : $1_def.r $1_sympars.txt \
                $1_smxa.m $1_smxax.m\
                $1_simpar.m $1_numpar.m $1_state.m $1_input.m \
                $1_csex.m $1_cseo.m  $1_logic.m
ifeq ($using_oct,yes)
	mtt $mtt_switches -q -u $1 smxa oct
	mtt $mtt_switches -q -u $1 smxax oct
	mtt $mtt_switches -q -u $1 simpar oct
	mtt $mtt_switches -q -u $1 numpar oct
	mtt $mtt_switches -q -u $1 state oct
	mtt $mtt_switches -q -u $1 input oct
	mtt $mtt_switches -q -u $1 csex oct
	mtt $mtt_switches -q -u $1 cseo oct
	mtt $mtt_switches -q -u $1 logic oct
	make_ode2odes $1 cc $integration_method
	echo Creating $1_ode2odes.oct
	mkoctfile $1_ode2odes.cc
	touch $1_ode2odes.m # Create a dummy which wont' be used
	mtt $mtt_switches -q -u $1 ode2odes oct
else
	make_ode2odes $1 m $integration_method
endif
endif
ifeq ($integration_method,euler)
$1_ode2odes.m : $1_def.r $1_sympars.txt\
		$1_simpar.m $1_numpar.m $1_state.m $1_input.m \
		$1_ode.m $1_odeo.m  $1_logic.m
ifeq ($using_oct,yes)
	mtt $mtt_switches -q -u $1 simpar oct
	mtt $mtt_switches -q -u $1 numpar oct
	mtt $mtt_switches -q -u $1 state oct
	mtt $mtt_switches -q -u $1 input oct
	mtt $mtt_switches -q -u $1 ode oct
	mtt $mtt_switches -q -u $1 odeo oct
	mtt $mtt_switches -q -u $1 logic oct
	make_ode2odes $1 cc $integration_method
	echo Creating $1_ode2odes.oct
	mkoctfile $1_ode2odes.cc
	touch $1_ode2odes.m # Create a dummy which wont' be used
	mtt $mtt_switches -q -u $1 ode2odes oct
else
	make_ode2odes $1 m $integration_method
endif

endif

$1_ode2odes.exe: $1_def.h $1_sympar.h\
		 $1_ode2odes.o ode2odes_common.o ode2odes_${integration_method}.o\
		 libmttcxx.a
	echo Creating $1_ode2odes.exe
	${MTT_CXX} ${MTT_LDFLAGS} $1_*.o ${MTT_CXXLIBS} -o $1_ode2odes.exe

libmttcxx.a: mtt_euler.o mtt_implicit.o
	echo Creating libmttcxx.a
	ar rc libmttcxx.a $^
	ranlib libmttcxx.a

$1_ode2odes.o: $1_ode2odes.cc ode2odes_common.o ode2odes_${integration_method}.o
	echo Creating $1_ode2odes.o
	${MTT_CXX} ${MTT_CXXFLAGS} ${MTT_CXXINCS} -c $1_ode2odes.cc -DSTANDALONE

$1_ode2odes.oct: $1_ode2odes.cc ode2odes_common.oct ode2odes_${integration_method}.oct
	touch $1_ode2odes.m
	echo Creating $1_ode2odes.oct
	$MKOCTFILE $1_ode2odes.cc

$1_ode2odes.cc: $1_def.r $1_sympars.txt\
		ode2odes_common.m ode2odes_common.cc\
		ode2odes_${integration_method}.m ode2odes_${integration_method}.cc
	touch $1_ode2odes.m
	make_ode2odes $1 cc $integration_method

#Conversion of m to p to c
#SUMMARY ode	ordinary differential equations (c)
#SUMMARY ode	ordinary differential equations (p)
#SUMMARY state	state declaration (c) 
#SUMMARY state	state declaration (p) 
$1_simpar.p : $1_def.r $1_simpar.m

###############################################################
## Version control history
###############################################################
## $Id$
## $Log$
## Revision 1.17  2000/12/27 16:46:13  peterg
## Stripped the mtt- from paths
##
## Revision 1.16  2000/12/27 15:16:44  peterg
## If then else format
##
## Revision 1.15  2000/12/27 14:57:43  peterg
## Now takes the base path as an argument
##
## Revision 1.14  2000/12/27 13:11:43  peterg

  export LATEX2HTML="latex2html -contents_in_navigation -index_in_navigation -address http://mtt.sourceforge.net"
  
  # Ascend stuff
  export ASCENDLIBRARY=$MTTPATH/ascend/lib
  
  # Oct file generation - use version with no optimisation.
  export MKOCTFILE=$MTT_LIB/octave/mkoctfile

    # ode2odes.exe stuff
    # local system
    PREFIX="/usr/local"
    PLAT="i686-pc-linux-gnu"
    GCCVERS="2.95.2"
    SRCOCTAVE="/cvs/octave"
    # include paths
    IOCTAVE="-I${PREFIX}/include/octave"
    # library paths
    LOCTAVE="-L${PREFIX}/lib/octave -loctave -lcruft -loctinterp"
    LKPATHSEA="-L${SRCOCTAVE}/kpathsea -lkpathsea"
    LREADLINE=" -L${SRCOCTAVE}/readline -lreadline"
    LSYSTEM="-ldl -lm -lncurses"
    LF2C="-L${PREFIX}/lib/gcc-lib/${PLAT}/${GCCVERS} -lg2c"
    LMTTCXX="-L. -lmttcxx"
    # compiler options
    export MTT_CXX="g++"
    export MTT_CXXFLAGS="-g -O3"
    export MTT_LD="ld"
    export MTT_CXXLIBS="${LOCTAVE} ${LKPATHSEA} ${LREADLINE} ${LF2C} ${LSYSTEM} ${LMTTCXX}"
    export MTT_CXXINCS="-I. ${IOCTAVE}"

fi

% %%
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

% Field separator
if nargin<3
  FS = ';';
end;

arg = '';
if strcmp(args, '')==0
  L = length(args);
  args_count = 0;
  for i=1:n
    arg_count = 0;
    arg = '';
    if args_count == L
      break;
    end;  
    while args_count < L
      args_count = args_count+1;
      arg_count = arg_count+1;
      ch = str2ch(args,args_count);
      if ch==FS
	break;
      end;
      arg = [arg ch];
    end;
  end;
end;

# -*-makefile-*-

.POSIX:

MTTFLAGS	= -q -u -oct $(OPTS)

# Adapt according to local set-up and mkoctfile
CXX		= g++
CXXFLAGS	= $(DEBUG) $(OPTIM) $(DEFINES) $(ARCHFLAGS) -fno-rtti -fno-exceptions -fno-implicit-templates

DEBUG		= -g
OPTIM		= -O3

PREFIX		= /usr/local

INCLUDES	= -I$(PREFIX)/include/octave

OCTAVE_SRC_PATH	= /cvs/octave

LIBOCTAVE	= -L$(PREFIX)/lib/octave			-loctave -lcruft -loctinterp
LIBKPATHSEA	= -L$(OCTAVE_SRC_PATH)/kpathsea			-lkpathsea
LIBREADLINE	= -L$(OCTAVE_SRC_PATH)/readline			-lreadline
#LIBBLAS		= -L/usr/local/src/ATLAS/lib/Linux_PIII		-lcblas -lf77blas -llapack -latlas -ltstatlas
#LIBBLAS		= 						-lblas -llapack
LIBF2C		= 						-lg2c
LIBRARIES	= 						-ldl -lm -lncurses

ARCHFLAGS	= $(i386FLAGS)
i386FLAGS	=  -mieee-fp 

# Define -DOCTAVE_DEV for octave 2.1.x
ifeq (0, $(shell octave --version | awk -F\. '{print $2}'))
DEFINES   = -DSTANDALONE
else
DEFINES   = -DSTANDALONE -DOCTAVE_DEV
endif

all: $(SYS)_standalone.$(LANG)

$(SYS)_standalone.exe: $(SYS)_ode2odes.cc $(SYS)_def.h $(SYS)_sympar.h
	cp $(MTT_LIB)/cc/*.cc .
	echo Creating $(SYS)_standalone.exe
	$(CXX) *.cc -o $@ $(CXXFLAGS) $(INCLUDES) $(LIBOCTAVE) $(LIBKPATHSEA) $(LIBREADLINE) $(LIBBLAS) $(LIBF2C) $(LIBRARIES)

.PHONY: $(SYS)_standalone.clean

$(SYS)_ode2odes.cc:
	mtt $(MTTFLAGS) $(SYS) ode2odes m

$(SYS)_def.h:
	mtt $(MTTFLAGS) $(SYS) def h

$(SYS)_sympar.h:
	mtt $(MTTFLAGS) $(SYS) sympar h 


$(SYS)_standalone.clean:
	cd .. ; mtt Clean
	rm -f ../$(SYS)_standalone.exe