SQLITE_NOTICE(283): recovered 5 frames from WAL file /data/mtt.fossil-wal
File mttroot/mtt/bin/mttrc.csh artifact 7afd308e13 part of check-in f03da97648
#!/bin/csh ## Automatically generated from bashrc on Wed Aug 28 15:17:42 BST 2002 - DO NOT EDIT #! /bin/sh ###################################### ##### Model Transformation Tools ##### ###################################### # Bourne shell script: mttrc - sets up paths etc for mtt # Usage: mttrc # Copyright (c) P.J.Gawthrop 1996,1977. ############################################################### ## Version control history ############################################################### ## $Id$ ## $Log$ ## Revision 1.35 2002/08/06 09:56:54 geraint ## Updated to work with changes in unstable version of Octave 2.1.36. ## Tested with 2.0.17 (ok) but will break earlier unstables (2.1.(<=35)). ## ## Revision 1.34 2002/05/08 14:51:03 geraint ## Moved matlab/octave data type conversion functions to a separate file. ## ## Revision 1.33 2002/05/08 11:39:36 gawthrop ## Added MTT_REP to PATH ## ## Revision 1.32 2002/05/07 23:50:34 geraint ## Preliminary support for Matlab dynamically linked shared objects: ## invoke with: mtt -cc sys rep mexglx ## ode2odes support is not yet included. ## ## Revision 1.31 2002/05/02 20:12:45 geraint ## Added -Wl,--rpath to MTT_CXXLIBS. Sets the runtime linker path so that the ## sys-admin does not have to ldconfig the octave directory for -cc to work. ## ## Revision 1.30 2002/05/02 11:10:11 geraint ## s/loctave/loctinterp/ ## ## Revision 1.29 2002/05/02 11:03:46 geraint ## Reinstated -liboctinterp and -lncurses; needed by xleftdiv. ## ## Revision 1.28 2002/05/01 12:21:29 geraint ## No longer uses save_ascii_data_for_plotting function to write data ## - eliminates dependence on liboctinterp (and libncurses) for .cc. ## ## Revision 1.27 2002/04/28 18:41:26 geraint ## Fixed [ 549658 ] awk should be gawk. ## Replaced calls to awk with call to gawk. ## ## Revision 1.26 2002/04/26 16:16:33 geraint ## Removed unnecessary variables PLAT and GCCVERS. ## ## Revision 1.25 2002/04/02 09:16:39 geraint ## Tidied up library search paths, now assumes that system libraries are set up correctly. ## For Debian, this means installing the following: blas-dev, fftw-dev, lapack-dev, libncurses5-dev, libkpathsea-dev, libreadline-dev ## It may also be necessary to run /sbin/ldconfig on the relevant directories (especially Octave's). ## ## Revision 1.24 2001/10/15 14:28:35 gawthrop ## Now has . at start of components library path $MTT_COMPONENTS ## ## Revision 1.23 2001/07/24 22:32:49 gawthrop ## Use gv, not ghostview ## ## Revision 1.22 2001/04/12 03:08:00 geraint ## Improved sh->csh conversion, reduces environment namespace pollution. ## ## Revision 1.21 2001/04/10 13:56:13 gawthrop ## Uses standard mkoctfile ## ## Revision 1.20 2001/04/10 13:08:19 gawthrop ## Smoother translation to .cs using sh2csh ## ## Revision 1.19 2001/03/30 15:13:49 gawthrop ## Rationalised simulation modes to each return mtt_data ## ## Revision 1.18 2001/03/19 02:28:52 geraint ## Branch merge: merging-ode2odes-exe back to MAIN. ## ## Revision 1.17.2.4 2001/03/06 03:48:43 geraint ## Print additional environment variable for "mtt -p". ## MTT_LDFLAGS defaults to " " to avoid installation warning. ## ## Revision 1.17.2.3 2001/03/01 05:05:53 geraint ## Minor revisions. ## ## Revision 1.17.2.2 2001/02/23 03:53:53 geraint ## Minor revisions. (ode2odes.exe works on GNU/Linux and ~GNU/Irix) ## ## Revision 1.17.2.1 2001/02/22 06:41:40 geraint ## Initial merge of ode2odes.exe into main mtt. ## standalone_rep.make deleted: rules moved to mtt, variables to mttrc. ## ## Revision 1.17 2000/12/27 16:46:13 peterg ## Stripped the mtt- from paths ## ## Revision 1.16 2000/12/27 15:16:44 peterg ## ## Revision 1.15 2000/12/27 14:57:43 peterg ## Now takes the base path as an argument ## ## Revision 1.14 2000/12/27 13:11:43 peterg ## *** empty log message *** ## ## Revision 1.13 2000/10/03 12:12:14 peterg ## New path structure to account for three way split in mtt tree ## ## Revision 1.12 2000/09/18 12:17:07 peterg ## Now includes to control system toolbox in OCTAVE_PATH ## Don't use -path stuff - use :: instead. ## ## Revision 1.11 2000/05/21 17:55:15 peterg ## New rep path ## ## Revision 1.10 2000/05/16 11:41:23 peterg ## *** empty log message *** ## ## Revision 1.9 1999/03/11 04:02:19 peterg ## Revised so that sh2csh does its stuff. ## ## Revision 1.8 1998/07/17 19:48:46 peterg ## *** empty log message *** ## ## Revision 1.7 1998/03/24 09:11:49 peterg ## Compatible with .csh version ## ## Revision 1.6 1998/03/13 11:53:29 peterg ## reduce --> reduce 64 ## ## Revision 1.5 1998/01/16 08:55:01 peterg ## MAKE=make ## ## Revision 1.4 1998/01/06 09:14:51 peterg ## Added latex2html to setup ## # Revision 1.3 1998/01/06 09:11:26 peterg # Removed matlab from the setup # # Revision 1.2 1997/12/04 10:49:16 peterg # Put under RCS at last # Added CC variable # ############################################################### ## When using csh, replace /usr/local/mtt/mttroot/mtt by the mtt base path, eg /usr/share/mtt/latest setenv MTT_BASE /usr/local/mtt/mttroot/mtt echo Setting paths with base $MTT_BASE # The following line sets up the make to use -- gmake is the standard # but you may wish to use lsmake for parallelism setenv MAKE 'make' # The following sets up the c compiler setenv CC 'gcc' # Setup the paths setenv MTTPATH $MTT_BASE/bin setenv MTT_LIB $MTT_BASE/lib setenv MTT_DOC $MTT_BASE/doc setenv MTT_CC $MTT_BASE/cc setenv MTT_COMPONENTS .:$MTT_LIB/comp setenv MTT_CRS $MTT_LIB/cr setenv MTT_EXAMPLES $MTT_LIB/examples setenv MTT_REP $MTT_LIB/rep setenv PATH $PATH\:$MTTPATH\:$MTTPATH/trans\:$MTT_CC\:$MTT_REP #Setup octave setenv MATRIX_PATH $MTTPATH/trans/m// setenv MATRIX_PATH $MATRIX_PATH\:$MTT_LIB/comp/simple// setenv MATRIX_PATH $MATRIX_PATH\:$MTT_LIB/control// setenv MATRIX_PATH $MATRIX_PATH\:$MTT_LIB/octave//\:\: setenv OCTAVE_PATH .\:$MATRIX_PATH setenv MATRIX "octave" # Setup the symbolic stuff setenv SYMBOLIC 'reduce 64' # Setup xfig setenv FIG "xfig \ -startfontsize 20 \ -metric \ -portrait \ -startgridmode 2 \ -pheight 21 \ -pwidth 30 \ -library_dir $MTT_LIB/xfig/\ " # Setup ps viewer setenv PSVIEW 'gv' # Setup pdf viewer setenv PDFVIEW 'acroread' # Setup html viewer setenv HTMLVIEW 'netscape' # Setup dvi viewer setenv DVIVIEW 'xdvi' # Setup latex2html setenv LATEX2HTML "latex2html -contents_in_navigation -index_in_navigation -address http://mtt.sourceforge.net" # Ascend stuff setenv ASCENDLIBRARY $MTTPATH/ascend/lib # Oct file generation - use version with no optimisation. #setenv MKOCTFILE $MTT_LIB/octave/mkoctfile # This for no optimisation setenv MKOCTFILE mkoctfile ######################################################################################### ## ## Configure environment for standalone compilation of files linked with Octave libraries ## (required for ode2odes.exe only) # location of Octave directories on local system (usually /usr, /usr/local or /opt) set OCTAVEPREFIX="/usr" # include paths for Octave set IOCTAVE="-I${OCTAVEPREFIX}/include/octave/ -I${OCTAVEPREFIX}/include/octave/octave" # library paths for Octave set OCTAVEVERS=`octave --version | head -1 | gawk '{ print $4 }'` set OCTAVEMINOR=`echo ${OCTAVEVERS} | gawk -F\. '{print $2}'` if [ "${OCTAVEMINOR}" = "0" ] ; then # stable LOCTAVE="-L${OCTAVEPREFIX}/lib/octave-${OCTAVEVERS} -loctave -lcruft -loctinterp -Wl,--rpath,${OCTAVEPREFIX}/lib/octave-${OCTAVEVERS}" LOCTAVE="-L${OCTAVEPREFIX}/lib/octave-${OCTAVEVERS} -loctave -lcruft -loctinterp -Wl,--rpath,${OCTAVEPREFIX}/lib/octave-${OCTAVEVERS} -loct-pathsearch -loct-readline" fi set LSYSTEM="-ldl -lm -lncurses -lkpathsea -lreadline -lblas -llapack -lfftw -lg2c" # C++ compiler options set DEBUG="-g" set OPTIM="-O3" set FLAGS="-fno-rtti -fno-exceptions -fno-implicit-templates" # exported variables setenv MTT_CXX "g++" setenv MTT_CXXFLAGS "${DEBUG} ${OPTIM} ${FLAGS}" setenv MTT_CXXLIBS "${LOCTAVE} ${LSYSTEM}" setenv MTT_CXXINCS "-I. -I${MTT_LIB}/cc ${IOCTAVE}" setenv MTT_LDFLAGS " " ## End of Octave environment configuration ## ######################################################################################### ############################################################ ## ## Configure environment for compilation of Matlab mex files set MATLAB_ARCH="glnx86" set MATLAB_ROOT="/usr/local/matlab6p1" set MATLAB_FLAGS="-shared -fPIC -ansi -D_GNU_SOURCE -pthread" set MATLAB_INCS="-I${MATLAB_ROOT}/extern/include" set MATLAB_LIBS="-Wl,--rpath-link,${MATLAB_ROOT}/extern/lib/${MATLAB_ARCH},--rpath-link,${MATLAB_ROOT}/bin/${MATLAB_ARCH} -L${MATLAB_ROOT}/bin/${MATLAB_ARCH} -lmx -lmex -lm" # exported variables setenv MTT_MATLAB_FLAGS "${MATLAB_FLAGS} ${MATLAB_INCS} ${MATLAB_LIBS}" ## End of Matlab environment configuration ## #############################################################