#! /bin/sh
## ident_rep.sh
## DIY representation "ident" for mtt
# Copyright (C) 2002 by Peter J. Gawthrop
ps=ps
sys=$1
rep=ident
lang=$2
mtt_parameters=$3
rep_parameters=$4
## Some names
target=${sys}_${rep}.${lang}
def_file=${sys}_def.r
dat2_file=${sys}_ident.dat2
dat2s_file=${sys}_idents.dat2
ident_numpar_file=${sys}_ident_numpar.m
option_file=${sys}_ident_mtt_options.txt
## Get system information
if [ -f "${def_file}" ]; then
echo Using ${def_file}
else
mtt -q ${sys} def r
fi
ny=`mtt_getsize $1 y`
nu=`mtt_getsize $1 u`
check_new_options() {
if [ -f "${option_file}" ]; then
old_options=`cat ${option_file}`
if [ "${mtt_options}" != "${old_options}" ]; then
echo ${mtt_options} > ${option_file}
fi
else
echo ${mtt_options} > ${option_file}
fi
}
## Make the _ident.m file
make_ident() {
filename=${sys}_${rep}.m
date=`date`
echo Creating ${filename}
cat > ${filename} <<EOF
function [epar,Y] = ${sys}_ident (y,u,t,par_names,Q,extras)
## usage: [epar,Y] = ${sys}_ident (y,u,t,par_names,Q,extras)
##
## last last time in run
## ppp_names Column vector of names of ppp params
## par_names Column vector of names of estimated params
## extras Structure containing additional info
##
## Created by MTT on ${date}
## Sensitivity system name
system_name = "s${sys}"
##Sanity check
if nargin<3
printf("Usage: [y,u,t] = ${sys}_ident(y,u,t,par_names,Q,extras);");
return
endif
if nargin<6
## Set up optional parameters
extras.criterion = 1e-3;
extras.emulate_timing = 0;
extras.max_iterations = 10;
extras.simulate = 2;
extras.v = 1e-2;
extras.verbose = 1;
extras.visual = 1;
endif
## System info
[n_x,n_y,n_u,n_z,n_yz] = ${sys}_def;
sympar = ${sys}_sympar;
simpar = ${sys}_simpar;
sympars = s${sys}_sympar;
simpars = s${sys}_simpar;
## Parameter indices
i_par = ppp_indices (par_names,sympar,sympars);
## Initial model state
x_0 = zeros(2*n_x,1);
## Initial model parameters
par_0 = s${sys}_numpar;
## Reset simulation parameters
[n_data,m_data] = size(y);
dt = t(2)-t(1);
simpars.last = (n_data-1)*dt;
simpars.dt = dt;
## Identification
[epar,Par,Error,Y,iterations,x] = ppp_optimise(system_name,x_0,par_0,simpars,u,y,i_par,Q,extras);
## Do some plots
figure(1);
title("Comparison of data");
xlabel("t");
ylabel("y");
[N,M] = size(Y);
plot(t,Y(:,M-n_y+1:M),"1;Estimated;", t,y,"3;Actual;");
figfig("${sys}_ident_comparison");
## Create a table of the parameters
[n_par,m_par] = size(i_par);
fid = fopen("${sys}_ident_par.tex", "w");
fprintf(fid,"\\\\begin{table}[htbp]\\n");
fprintf(fid," \\\\centering\\n");
fprintf(fid," \\\\begin{tabular}{|l|l|}\\n");
fprintf(fid," \\\\hline\\n");
fprintf(fid," Name & Value \\\\\\\\ \\n");
fprintf(fid," \\\\hline\\n");
for i = 1:n_par
fprintf(fid,"$%s$ & %4.2f \\\\\\\\ \\n", par_names(i,:), epar(i_par(i,1)));
endfor
fprintf(fid," \\\\hline\\n");
fprintf(fid,"\\\\end{tabular}\\n");
fprintf(fid,"\\\\caption{Estimated Parameters}\\n");
fprintf(fid,"\\\\end{table}\\n");
fclose(fid);
endfunction
EOF
}
make_ident_numpar() {
echo Creating ${ident_numpar_file}
cat > ${sys}_ident_numpar.m <<EOF
function [y,u,t,par_names,Q,extras] = ${sys}_ident_numpar;
## usage: [y,u,t,par_names,Q,extras] = ${sys}_ident_numpar;
## Edit for your own requirements
## Created by MTT on ${date}
## This section sets up the data source
## simulate = 0 Real data (you supply ${sys}_ident_data.dat)
## simulate = 1 Real data input, simulated output
## simulate = 2 Unit step input, simulated output
simulate = 2;
## System info
[n_x,n_y,n_u,n_z,n_yz] = ${sys}_def;
simpars = s${sys}_simpar;
## Access or create data
if (simulate<2) # Get the real data
if (exist("${sys}_ident_data.dat")==2)
printf("Loading ${sys}_ident_data.dat\n");
load ${sys}_ident_data.dat
else
printf("Please create a loadable file ${sys}_ident_data.dat containing y,u and t\n");
return
endif
else
switch simulate
case 2 # Step simulation
t = [0:simpars.dt:simpars.last]';
u = ones(size(t));
otherwise
error(sprintf("simulate = %i not implemented", simulate));
endswitch
endif
if (simulate>0)
par = ${sys}_numpar();
x_0 = ${sys}_state(par);
dt = t(2)-t(1);
simpars.dt = dt;
simpars.last = t(length(t));
y = ${sys}_sim(zeros(n_x,1), par, simpars, u);
endif
## Default parameter names - Put in your own here
sympar = ${sys}_sympar; # Symbolic params as structure
par_names = struct_elements (sympar); # Symbolic params as strings
[n,m] = size(par_names); # Size the string list
## Sort by index
for [i,name] = sympar
par_names(i,:) = sprintf("%s%s",name, blanks(m-length(name)));
endfor
## Output weighting vector
Q = ones(n_y,1);
## Extra parameters
extras.criterion = 1e-5;
extras.emulate_timing = 0;
extras.max_iterations = 10;
extras.simulate = simulate;
extras.v = 1e-2;
extras.verbose = 1;
extras.visual = 1;
endfunction
EOF
}
make_dat2() {
## Inform user
echo Creating ${dat2_file}
## Use octave to generate the data
octave -q <<EOF
[y,u,t,par_names,Q,extras] = ${sys}_ident_numpar;
[epar,Y] = ${sys}_ident (y,u,t,par_names,Q,extras);
[N,M] = size(Y);
y_est = Y(:,M);
data = [t,y_est,u];
save -ascii ${dat2_file} data
EOF
## Tidy up the latex stuff - convert foo_123 to foo_{123}
cat ${sys}_ident_par.tex > mtt_junk
sed -e "s/_\([a-z0-9,]*\)/_{\1}/g" < mtt_junk >${sys}_ident_par.tex
rm mtt_junk
}
case ${lang} in
numpar.m)
## Make the numpar stuff
make_ident_numpar;
;;
m)
## Make the code
make_ident;
;;
dat2)
## The dat2 language (output data) & fig file
make_dat2;
;;
gdat)
cp ${dat2_file} ${dat2s_file}
dat22dat ${sys} ${rep}
dat2gdat ${sys} ${rep}
;;
fig)
gdat2fig ${sys}_${rep}
;;
ps)
figs=`ls ${sys}_ident*.fig | sed -e 's/\.fig//'`
for fig in ${figs}; do
fig2dev -Leps ${fig}.fig > ${fig}.ps
done
texs=`ls ${sys}_ident*.tex | sed -e 's/\.tex//'`
for tex in ${texs}; do
makedoc "" "${sys}" "ident_par" "tex" "" "" "$ps"
doc2$ps ${sys}_ident_par "$documenttype"
done
;;
view)
pss=`ls ${sys}_ident*.ps`
echo Viewing ${pss}
for ps in ${pss}; do
gv ${ps}&
done
;;
*)
echo Language ${lang} not supported by ${rep} representation
exit 3
esac