#! /bin/sh
sys=$1
out=${sys}_gnuplot.wish
struc=${sys}_struc.txt
dat2=${sys}_odes.dat2
Nx=`mtt_getsize ${sys} x`
Ny=`mtt_getsize ${sys} y`
## write header
cat <<EOF > ${out}
#!/bin/sh
# Next line replaces shell with wish\\
exec wish "\$0" "\$@"
## main window
wm title . "MTT Viewer: ${sys}"
set parameter ""
# menu bar
canvas .menubar
menubutton .menubar.file -text "File" -menu .menubar.file.menu
menu .menubar.file.menu
.menubar.file.menu add command -label "Open (Gnuplot plot file)" -command open_plotfile
.menubar.file.menu add command -label "Save (Gnuplot plot file)" -command save_plotfile
.menubar.file.menu add separator
.menubar.file.menu add command -label "Print (PostScript file)" -command print_postscript
.menubar.file.menu add separator
.menubar.file.menu add command -label "Quit" -command exit
button .menubar.xmtt -text "xMTT" -relief flat -command { exec xmtt }
button .menubar.quit -text "Quit" -relief flat -command exit
pack .menubar.file -expand false -fill x -side left
pack .menubar.xmtt -expand false -fill x -side left
pack .menubar.quit -expand false -fill x -side right
# status bar
canvas .statusbar
radiobutton .statusbar.states -text "States" -value states -variable view -relief solid -command { raise .cx }
radiobutton .statusbar.outputs -text "Outputs" -value outputs -variable view -relief solid -command { raise .cy }
tk_optionMenu .statusbar.plot plottype "Single Plot" "Multi Plot" "New Window"
tk_optionMenu .statusbar.grid grid "Grid On" "Grid Off"
tk_optionMenu .statusbar.coord coord "Cartesian" "Polar"
pack .statusbar.states -expand false -fill x -side left
pack .statusbar.outputs -expand false -fill x -side left
pack .statusbar.plot -expand false -fill x -side right
pack .statusbar.coord -expand false -fill x -side right
pack .statusbar.grid -expand false -fill x -side right
## states canvas
canvas .cx
listbox .cx.l
scrollbar .cx.sy -orient v
checkbutton .cx.t -text "States" -relief flat
## outputs canvas
canvas .cy
listbox .cy.l
scrollbar .cy.sy -orient v
checkbutton .cy.t -text "Outputs" -relief flat
## configure scrollbars
.cx.sy configure -command ".cx.l yview"
.cy.sy configure -command ".cy.l yview"
.cx.l configure -yscrollcommand ".cx.sy set"
.cy.l configure -yscrollcommand ".cy.sy set"
## bind lists
bind .cx.l <<ListboxSelect>> { set parameter [ .cx.l get anchor ] ; plot \$parameter }
bind .cy.l <<ListboxSelect>> { set parameter [ .cy.l get anchor ] ; plot \$parameter }
proc "reverse_name" "name" {
set delim "_"
set split_name [split \$name \$delim]
set reversed_name [lindex \$split_name 0]
for {set i 1} {\$i<[llength \$split_name]} {incr i} {
set reversed_name [lindex \$split_name \$i]\$delim\$reversed_name
}
return \$reversed_name
}
proc "reverse_sort" "list" {
set temp_list {}
set delim " "
foreach name [split \$list \$delim] {
set temp_list \$temp_list\$delim[reverse_name \$name]
}
set temp_list [lsort -ascii \$temp_list]
set list {}
foreach name [split \$temp_list \$delim] {
set list \$list\$delim[reverse_name \$name]
}
return \$list
}
proc "sort_list" "list sortorder" {
if ("\$sortorder"=="normal") {
return [lsort -ascii \$list]
}
if ("\$sortorder"=="reverse") {
return [reverse_sort \$list]
}
}
EOF
## create states and outputs lists
gawk '
($1 == "state") {
printf "lappend xl state:%s\n", $4
}
($1 == "output") {
printf "lappend yl output:%s\n", $4
}' ${struc} >> ${out}
cat <<EOF >> ${out}
.cx.l configure -listvar xl
.cy.l configure -listvar yl
.cx.t configure -command { set xl [sort_list \$xl \$xsortorder] } -indicatoron false -onvalue "reverse" -offvalue "normal" -variable xsortorder
.cy.t configure -command { set yl [sort_list \$yl \$ysortorder] } -indicatoron false -onvalue "reverse" -offvalue "normal" -variable ysortorder
pack .menubar -expand false -fill x -side top
pack .statusbar -expand false -fill x -side bottom
pack .cx.t -expand false -fill x -side top
pack .cy.t -expand false -fill x -side top
pack .cx.sy -expand false -fill y -side right
pack .cy.sy -expand false -fill y -side right
pack .cx.l -expand true -fill both -side left
pack .cy.l -expand true -fill both -side left
pack .cx -expand true -fill both
place .cy -in .cx -relx 0 -rely 0 -relwidth 1 -relheight 1 -anchor nw -bordermode outside
## map names to column numbers
EOF
gawk '
BEGIN {
print "proc \"plot\" \"title\" {";
}
($1 == "state") {
printf "if (\"%s\"==\"state:%s\") { plot_var \"%s\" %d }\n", Title, $4, $4, $2+2+Ny;
}
($1 == "output") {
printf "if (\"%s\"==\"output:%s\") { plot_var \"%s\" %d }\n", Title, $4, $4, $2+1;
}
END {
print "}"
}
' Title=\$title Ny=${Ny} ${struc} >> ${out}
cat <<EOF >> ${out}
## call gnuplot
proc "plot_var" "title column" {
set_plot_options
puts "set term X11"
global plottype
if {"\$plottype" == "Multi Plot"} {
puts "replot '${dat2}' using 1:\$column title '\$title' with lines"
} elseif {"\$plottype" == "New Window"} {
puts "! echo \"plot '${dat2}' using 1:\$column title '\$title' with lines\" | gnuplot -geometry 400x300 -persist"
} else {
puts "plot '${dat2}' using 1:\$column title '\$title' with lines"
}
}
proc "set_plot_options" "" {
global coord; # "Cartesian", "Polar"
global grid; # "Grid On", "Grid Off"
if {"\$coord" == "Cartesian"} {
puts "set nopolar"
} else {
puts "set polar"
}
if {"\$grid" == "Grid On"} {
puts "set grid"
} else {
puts "set nogrid"
}
}
## open gnuplot plot file
proc "open_plotfile" "" {
global parameter
if {"\$parameter"==""} {
set name "${sys}.plt"
} else {
set name "\$parameter.plt"
}
set filename [tk_getOpenFile\
-initialdir ".."\
-initialfile "\$name"\
-defaultextension ".plt"\
-filetypes {
{{Gnuplot} {.plt}}
{{All files} {*}}
}
]
puts "load '\$filename'"
}
## save gnuplot plot file
proc "save_plotfile" "" {
global parameter
if {"\$parameter"==""} {
set name "${sys}.plt"
} else {
set name "\$parameter.plt"
}
set filename [tk_getSaveFile\
-initialdir ".."\
-initialfile "\$name"\
-defaultextension ".plt"\
-filetypes {
{{Gnuplot} {.plt}}
{{All files} {*}}
}
]
puts "save '\$filename'"
}
## print output to postscript
proc "print_postscript" "" {
global parameter;
if {"\$parameter"==""} {
tk_dialog ".mtt_Print_Error" "Print Error" "Select a parameter!" "" "0" "Try Again"
} else {
set filename [tk_getSaveFile\
-initialdir ".."\
-initialfile "\$parameter.ps"\
-defaultextension ".ps"\
-filetypes {
{{Postscript} {.ps}}
{{All files} {*}}
}
]
if {\$filename != ""} {
puts "set term postscript"
puts "set output '\$filename'"
puts "replot"
tk_dialog ".printed" "Graph Printed!" "PostScript saved as \$filename" "" "0" "Close"
}
}
}
EOF
chmod +x ${out}