# See www/containers.md for documentation on how to use this file.

## ---------------------------------------------------------------------
## STAGE 1: Build static Fossil & BusyBox binaries atop Alpine Linux
## ---------------------------------------------------------------------

FROM alpine:latest AS builder







WORKDIR /tmp

### Bake the basic Alpine Linux into a base layer so we never have to
### repeat that step unless we change the package set.  Although we're
### going to throw this layer away below, we still pass --no-cache
### because that cache is of no use in an immutable layer.  Note that
### we allow the UPX step to fail: it isn't in the ARM distros.  We'll
### check whether this optional piece exists before using it below.
RUN set -x                                                             \
    && apk update                                                      \
    && apk upgrade --no-cache                                          \
    && apk add --no-cache                                              \
         gcc make moreutils                                            \
         linux-headers musl-dev                                        \
         openssl-dev openssl-libs-static                               \
         zlib-dev zlib-static                                          \
     ; apk add --no-cache upx

### Bake the custom BusyBox into another layer.  The intent is that this
### changes only when we change BBXVER.  That will force an update of
### the layers below, but this is a rare occurrence.
ARG BBXVER="1_35_0"
ENV BBXURL "https://github.com/mirror/busybox/tarball/${BBXVER}"
COPY containers/busybox-config /tmp/bbx/.config
ADD $BBXURL /tmp/bbx/src.tar.gz
RUN set -x \
    && tar --strip-components=1 -C bbx -xzf bbx/src.tar.gz            \
    && ( cd bbx && yes "" | make oldconfig && make -j11 )             \
    && if [ -x /usr/bin/upx ] ; then upx -9q bbx/busybox ; fi

### The changeable Fossil layer is the only one in the first stage that
### changes often, so add it last, to make it independent of the others.
###
### $FSLSTB can be either a file or a directory due to a ADD's bizarre
### behavior: it unpacks tarballs when added from a local file but not
### from a URL!   It matters because we default to a URL in case you're
### building outside a Fossil checkout, but when building via the
### container-image target, we can avoid a costly hit on the Fossil
### project's home site by pulling the data from the local repo via the
### "tarball" command.  This is a DVCS, after all!
ARG FSLVER="trunk"
ARG FSLURL="https://fossil-scm.org/home/tarball/src?r=${FSLVER}"
ENV FSLSTB=/tmp/fsl/src.tar.gz
ADD $FSLURL $FSLSTB
RUN set -x \
    && if [ -d $FSLSTB ] ; then mv $FSLSTB/src fsl ;                  \
       else tar -C fsl -xzf fsl/src.tar.gz ; fi                       \
    && m=fsl/src/src/main.mk                                          \
    && grep -v '/skins/[a-ce-z]' $m | sponge $m                       \
    && fsl/src/configure --static CFLAGS='-Os -s' && make -j11        \
    && if [ -x /usr/bin/upx ] ; then upx -9q fossil ; fi


## ---------------------------------------------------------------------
## STAGE 2: Pare that back to the bare essentials.
## ---------------------------------------------------------------------

FROM scratch
WORKDIR /jail
ARG UID=499
ENV PATH "/bin:/jail/bin"

### Lay BusyBox down as the first base layer. Coupled with the host's
### kernel, this is the "OS."
COPY --from=builder /tmp/bbx/busybox /bin/
RUN [ "/bin/busybox", "--install", "/bin" ]

### Set up that base OS for our specific use without tying it to
### anything likely to change often.  So long as the user leaves
### UID alone, this layer will be durable.
RUN set -x                                                             \
    && echo 'root:x:0:0:SysAdmin:/:/bin/nologin' > /etc/passwd         \
    && echo 'root:x:0:root'                      > /etc/group          \
    && addgroup -S -g ${UID} fossil                                    \
    && adduser -S -h `pwd` -g 'Fossil User' -G fossil -u ${UID} fossil \
    && install -d -m 700 -o fossil -g fossil log museum                \
    && install -d -m 755 -o fossil -g fossil dev                       \
    && mknod -m 666 dev/null    c 1 3                                  \
    && mknod -m 444 dev/urandom c 1 9

### Do Fossil-specific things atop those base layers; this will change
### as often as the Fossil build-from-source layer above.
COPY --from=builder /tmp/fossil bin/
RUN set -x                                                             \
    && ln -s /jail/bin/fossil /bin/f                                   \
    && echo -e '#!/bin/sh\nfossil sha1sum "$@"' > /bin/sha1sum         \
    && echo -e '#!/bin/sh\nfossil sha3sum "$@"' > /bin/sha3sum         \
    && echo -e '#!/bin/sh\nfossil sqlite3 --no-repository "$@"' >      \
       /bin/sqlite3                                                    \
    && chmod +x /bin/sha?sum /bin/sqlite3









## ---------------------------------------------------------------------
## STAGE 3: Run!
## ---------------------------------------------------------------------

EXPOSE 8080/tcp
CMD [ \
    "bin/fossil", "server", \
    "--chroot", "/jail",    \
    "--create",             \
    "--jsmode", "bundled",  \

#
TCLSH = @TCLSH@

CFLAGS = @CFLAGS@
CFLAGS_INCLUDE = @CFLAGS_INCLUDE@
LIB =	@LDFLAGS@ @EXTRA_LDFLAGS@ @LIBS@
BCCFLAGS =	@CPPFLAGS@ $(CFLAGS)
TCCFLAGS =	@EXTRA_CFLAGS@ @CPPFLAGS@ $(CFLAGS) -DHAVE_AUTOCONFIG_H
#
# Fuzzing may be enable by appending -fsanitize=fuzzer -DFOSSIL_FUZZ
# to the TCCFLAGS variable.
# For more thorouth (but also slower) investigation
#      -fsanitize=fuzzer,undefined,address
# might be more useful.

# of delegating to it with "$(MAKE) reconfig": having children running
# around interfering makes this failure mode even worse.
Makefile: @srcdir@/Makefile.in $(SRCDIR)/main.mk @AUTODEPS@
	@AUTOREMAKE@
	touch @builddir@/Makefile

# Container stuff
SRCTB := src-@FOSSIL_CI_PFX@.tar.gz
container-image:
	$(APPNAME) tarball --name src @FOSSIL_CI_PFX@ $(SRCTB)
	docker build \
		--tag fossil:@FOSSIL_CI_PFX@ \
		--build-arg FSLURL=$(SRCTB) \
		$(DBFLAGS) @srcdir@
	rm -f $(SRCTB)

container-run: container-image
	docker run \
		--name fossil-@FOSSIL_CI_PFX@ \
		--cap-drop AUDIT_WRITE \


		--cap-drop CHOWN \
		--cap-drop FSETID \
		--cap-drop KILL \
		--cap-drop MKNOD \
		--cap-drop NET_BIND_SERVICE \
		--cap-drop NET_RAW \
		--cap-drop SETFCAP \
		--cap-drop SETPCAP \
		--detach --publish 8080:8080 \
		$(DRFLAGS) fossil:@FOSSIL_CI_PFX@
	docker container logs fossil-@FOSSIL_CI_PFX@

  make-template tools/emcc.sh.in
  catch {exec chmod u+x tools/emcc.sh}
} else {
  define EMCC_WRAPPER ""
  catch {exec rm -f tools/emcc.sh}
}

# Tag container builds with a prefix of the checkin ID of the version
# of Fossil each one contains.  This not only allows multiple images
# to coexist and multiple containers to be created unamgiguosly from
# them, it also changes the URL we fetch the source tarball from, so
# repeated builds of a given version generate and fetch the source
# tarball once only, keeping it in the local Docker/Podman cache.
set ci [readfile "$::autosetup(srcdir)/manifest.uuid"]
define FOSSIL_CI_PFX [string range $ci 0 11]


make-template Makefile.in
make-config-header autoconfig.h -auto {USE_* FOSSIL_*}

Index: Dockerfile
==================================================================
--- Dockerfile
+++ Dockerfile
@@ -61,13 +61,13 @@
 ## ---------------------------------------------------------------------
 ## STAGE 2: Pare that back to the bare essentials.
 ## ---------------------------------------------------------------------
 
 FROM scratch
-WORKDIR /jail
+WORKDIR /
 ARG UID=499
-ENV PATH "/bin:/jail/bin"
+ENV PATH "/bin"
 
 ### Lay BusyBox down as the first base layer. Coupled with the host's
 ### kernel, this is the "OS."
 COPY --from=builder /tmp/bbx/busybox /bin/
 RUN [ "/bin/busybox", "--install", "/bin" ]
@@ -78,20 +78,17 @@
 RUN set -x                                                             \
     && echo 'root:x:0:0:SysAdmin:/:/bin/nologin' > /etc/passwd         \
     && echo 'root:x:0:root'                      > /etc/group          \
     && addgroup -S -g ${UID} fossil                                    \
     && adduser -S -h `pwd` -g 'Fossil User' -G fossil -u ${UID} fossil \
-    && install -d -m 700 -o fossil -g fossil log museum                \
-    && install -d -m 755 -o fossil -g fossil dev                       \
-    && mknod -m 666 dev/null    c 1 3                                  \
-    && mknod -m 444 dev/urandom c 1 9
+    && install -d -m 700 -o fossil -g fossil log museum
 
 ### Do Fossil-specific things atop those base layers; this will change
 ### as often as the Fossil build-from-source layer above.
 COPY --from=builder /tmp/fossil bin/
 RUN set -x                                                             \
-    && ln -s /jail/bin/fossil /bin/f                                   \
+    && ln -s /bin/fossil /bin/f                                   \
     && echo -e '#!/bin/sh\nfossil sha1sum "$@"' > /bin/sha1sum         \
     && echo -e '#!/bin/sh\nfossil sha3sum "$@"' > /bin/sha3sum         \
     && echo -e '#!/bin/sh\nfossil sqlite3 --no-repository "$@"' >      \
        /bin/sqlite3                                                    \
     && chmod +x /bin/sha?sum /bin/sqlite3
@@ -100,12 +97,12 @@
 ## ---------------------------------------------------------------------
 ## STAGE 3: Run!
 ## ---------------------------------------------------------------------
 
 EXPOSE 8080/tcp
+USER fossil
 CMD [ \
     "bin/fossil", "server", \
-    "--chroot", "/jail",    \
     "--create",             \
     "--jsmode", "bundled",  \
     "--user", "admin",      \
     "museum/repo.fossil"]

# CONFIG_NSLOOKUP is not set
# CONFIG_FEATURE_NSLOOKUP_BIG is not set
# CONFIG_FEATURE_NSLOOKUP_LONG_OPTIONS is not set
# CONFIG_NTPD is not set
# CONFIG_FEATURE_NTPD_SERVER is not set
# CONFIG_FEATURE_NTPD_CONF is not set
# CONFIG_FEATURE_NTP_AUTH is not set
# CONFIG_PING is not set
# CONFIG_PING6 is not set
# CONFIG_FEATURE_FANCY_PING is not set
# CONFIG_PSCAN is not set
CONFIG_ROUTE=y
# CONFIG_SLATTACH is not set
CONFIG_SSL_CLIENT=y
# CONFIG_TC is not set
# CONFIG_FEATURE_TC_INGRESS is not set
# CONFIG_TCPSVD is not set

# CONFIG_FEATURE_TFTP_HPA_COMPAT is not set
# CONFIG_TFTPD is not set
# CONFIG_FEATURE_TFTP_GET is not set
# CONFIG_FEATURE_TFTP_PUT is not set
# CONFIG_FEATURE_TFTP_BLOCKSIZE is not set
# CONFIG_TFTP_DEBUG is not set
CONFIG_TLS=y
# CONFIG_TRACEROUTE is not set
# CONFIG_TRACEROUTE6 is not set
# CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set
# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
# CONFIG_TUNCTL is not set
# CONFIG_FEATURE_TUNCTL_UG is not set
# CONFIG_VCONFIG is not set
CONFIG_WGET=y
CONFIG_FEATURE_WGET_LONG_OPTIONS=y
CONFIG_FEATURE_WGET_STATUSBAR=y
CONFIG_FEATURE_WGET_FTP=y

#else
  yyStackEntry yystack[YYSTACKDEPTH];  /* The parser's stack */
  yyStackEntry *yystackEnd;            /* Last entry in the stack */
#endif
};
typedef struct yyParser yyParser;

#include <assert.h>
#ifndef NDEBUG
#include <stdio.h>

static FILE *yyTraceFILE = 0;
static char *yyTracePrompt = 0;
#endif /* NDEBUG */

#ifndef NDEBUG
/* 
** Turn parser tracing on by giving a stream to which to write the trace

  YYACTIONTYPE yyact;             /* The next action */
  yyStackEntry *yymsp;            /* The top of the parser's stack */
  int yysize;                     /* Amount to pop the stack */
  pik_parserARG_FETCH
  (void)yyLookahead;
  (void)yyLookaheadToken;
  yymsp = yypParser->yytos;


















































  switch( yyruleno ){
  /* Beginning here are the reduction cases.  A typical example
  ** follows:
  **   case 0:
  **  #line <lineno> <grammarfile>
  **     { ... }           // User supplied code
  **  #line <lineno> <thisfile>
  **     break;
  */
/********** Begin reduce actions **********************************************/
        YYMINORTYPE yylhsminor;
      case 0: /* document ::= statement_list */
#line 547 "pikchr.y"
{pik_render(p,yymsp[0].minor.yy227);}
#line 2413 "pikchr.c"
        break;
      case 1: /* statement_list ::= statement */
#line 550 "pikchr.y"
{ yylhsminor.yy227 = pik_elist_append(p,0,yymsp[0].minor.yy36); }
#line 2418 "pikchr.c"
  yymsp[0].minor.yy227 = yylhsminor.yy227;
        break;
      case 2: /* statement_list ::= statement_list EOL statement */
#line 552 "pikchr.y"
{ yylhsminor.yy227 = pik_elist_append(p,yymsp[-2].minor.yy227,yymsp[0].minor.yy36); }
#line 2424 "pikchr.c"
  yymsp[-2].minor.yy227 = yylhsminor.yy227;
        break;
      case 3: /* statement ::= */
#line 555 "pikchr.y"
{ yymsp[1].minor.yy36 = 0; }
#line 2430 "pikchr.c"
        break;
      case 4: /* statement ::= direction */
#line 556 "pikchr.y"
{ pik_set_direction(p,yymsp[0].minor.yy0.eCode);  yylhsminor.yy36=0; }
#line 2435 "pikchr.c"
  yymsp[0].minor.yy36 = yylhsminor.yy36;
        break;
      case 5: /* statement ::= lvalue ASSIGN rvalue */
#line 557 "pikchr.y"
{pik_set_var(p,&yymsp[-2].minor.yy0,yymsp[0].minor.yy153,&yymsp[-1].minor.yy0); yylhsminor.yy36=0;}
#line 2441 "pikchr.c"
  yymsp[-2].minor.yy36 = yylhsminor.yy36;
        break;
      case 6: /* statement ::= PLACENAME COLON unnamed_statement */
#line 559 "pikchr.y"
{ yylhsminor.yy36 = yymsp[0].minor.yy36;  pik_elem_setname(p,yymsp[0].minor.yy36,&yymsp[-2].minor.yy0); }
#line 2447 "pikchr.c"
  yymsp[-2].minor.yy36 = yylhsminor.yy36;
        break;
      case 7: /* statement ::= PLACENAME COLON position */
#line 561 "pikchr.y"
{ yylhsminor.yy36 = pik_elem_new(p,0,0,0);
                 if(yylhsminor.yy36){ yylhsminor.yy36->ptAt = yymsp[0].minor.yy79; pik_elem_setname(p,yylhsminor.yy36,&yymsp[-2].minor.yy0); }}
#line 2454 "pikchr.c"
  yymsp[-2].minor.yy36 = yylhsminor.yy36;
        break;
      case 8: /* statement ::= unnamed_statement */
#line 563 "pikchr.y"
{yylhsminor.yy36 = yymsp[0].minor.yy36;}
#line 2460 "pikchr.c"
  yymsp[0].minor.yy36 = yylhsminor.yy36;
        break;
      case 9: /* statement ::= print prlist */
#line 564 "pikchr.y"
{pik_append(p,"<br>\n",5); yymsp[-1].minor.yy36=0;}
#line 2466 "pikchr.c"
        break;
      case 10: /* statement ::= ASSERT LP expr EQ expr RP */
#line 569 "pikchr.y"
{yymsp[-5].minor.yy36=pik_assert(p,yymsp[-3].minor.yy153,&yymsp[-2].minor.yy0,yymsp[-1].minor.yy153);}
#line 2471 "pikchr.c"
        break;
      case 11: /* statement ::= ASSERT LP position EQ position RP */
#line 571 "pikchr.y"
{yymsp[-5].minor.yy36=pik_position_assert(p,&yymsp[-3].minor.yy79,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy79);}
#line 2476 "pikchr.c"
        break;
      case 12: /* statement ::= DEFINE ID CODEBLOCK */
#line 572 "pikchr.y"
{yymsp[-2].minor.yy36=0; pik_add_macro(p,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0);}
#line 2481 "pikchr.c"
        break;
      case 13: /* rvalue ::= PLACENAME */
#line 583 "pikchr.y"
{yylhsminor.yy153 = pik_lookup_color(p,&yymsp[0].minor.yy0);}
#line 2486 "pikchr.c"
  yymsp[0].minor.yy153 = yylhsminor.yy153;
        break;
      case 14: /* pritem ::= FILL */
      case 15: /* pritem ::= COLOR */ yytestcase(yyruleno==15);
      case 16: /* pritem ::= THICKNESS */ yytestcase(yyruleno==16);
#line 588 "pikchr.y"
{pik_append_num(p,"",pik_value(p,yymsp[0].minor.yy0.z,yymsp[0].minor.yy0.n,0));}
#line 2494 "pikchr.c"
        break;
      case 17: /* pritem ::= rvalue */
#line 591 "pikchr.y"
{pik_append_num(p,"",yymsp[0].minor.yy153);}
#line 2499 "pikchr.c"
        break;
      case 18: /* pritem ::= STRING */
#line 592 "pikchr.y"
{pik_append_text(p,yymsp[0].minor.yy0.z+1,yymsp[0].minor.yy0.n-2,0);}
#line 2504 "pikchr.c"
        break;
      case 19: /* prsep ::= COMMA */
#line 593 "pikchr.y"
{pik_append(p, " ", 1);}
#line 2509 "pikchr.c"
        break;
      case 20: /* unnamed_statement ::= basetype attribute_list */
#line 596 "pikchr.y"
{yylhsminor.yy36 = yymsp[-1].minor.yy36; pik_after_adding_attributes(p,yylhsminor.yy36);}
#line 2514 "pikchr.c"
  yymsp[-1].minor.yy36 = yylhsminor.yy36;
        break;
      case 21: /* basetype ::= CLASSNAME */
#line 598 "pikchr.y"
{yylhsminor.yy36 = pik_elem_new(p,&yymsp[0].minor.yy0,0,0); }
#line 2520 "pikchr.c"
  yymsp[0].minor.yy36 = yylhsminor.yy36;
        break;
      case 22: /* basetype ::= STRING textposition */
#line 600 "pikchr.y"
{yymsp[-1].minor.yy0.eCode = yymsp[0].minor.yy164; yylhsminor.yy36 = pik_elem_new(p,0,&yymsp[-1].minor.yy0,0); }
#line 2526 "pikchr.c"
  yymsp[-1].minor.yy36 = yylhsminor.yy36;
        break;
      case 23: /* basetype ::= LB savelist statement_list RB */
#line 602 "pikchr.y"
{ p->list = yymsp[-2].minor.yy227; yymsp[-3].minor.yy36 = pik_elem_new(p,0,0,yymsp[-1].minor.yy227); if(yymsp[-3].minor.yy36) yymsp[-3].minor.yy36->errTok = yymsp[0].minor.yy0; }
#line 2532 "pikchr.c"
        break;
      case 24: /* savelist ::= */
#line 607 "pikchr.y"
{yymsp[1].minor.yy227 = p->list; p->list = 0;}
#line 2537 "pikchr.c"
        break;
      case 25: /* relexpr ::= expr */
#line 614 "pikchr.y"
{yylhsminor.yy10.rAbs = yymsp[0].minor.yy153; yylhsminor.yy10.rRel = 0;}
#line 2542 "pikchr.c"
  yymsp[0].minor.yy10 = yylhsminor.yy10;
        break;
      case 26: /* relexpr ::= expr PERCENT */
#line 615 "pikchr.y"
{yylhsminor.yy10.rAbs = 0; yylhsminor.yy10.rRel = yymsp[-1].minor.yy153/100;}
#line 2548 "pikchr.c"
  yymsp[-1].minor.yy10 = yylhsminor.yy10;
        break;
      case 27: /* optrelexpr ::= */
#line 617 "pikchr.y"
{yymsp[1].minor.yy10.rAbs = 0; yymsp[1].minor.yy10.rRel = 1.0;}
#line 2554 "pikchr.c"
        break;
      case 28: /* attribute_list ::= relexpr alist */
#line 619 "pikchr.y"
{pik_add_direction(p,0,&yymsp[-1].minor.yy10);}
#line 2559 "pikchr.c"
        break;
      case 29: /* attribute ::= numproperty relexpr */
#line 623 "pikchr.y"
{ pik_set_numprop(p,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy10); }
#line 2564 "pikchr.c"
        break;
      case 30: /* attribute ::= dashproperty expr */
#line 624 "pikchr.y"
{ pik_set_dashed(p,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy153); }
#line 2569 "pikchr.c"
        break;
      case 31: /* attribute ::= dashproperty */
#line 625 "pikchr.y"
{ pik_set_dashed(p,&yymsp[0].minor.yy0,0);  }
#line 2574 "pikchr.c"
        break;
      case 32: /* attribute ::= colorproperty rvalue */
#line 626 "pikchr.y"
{ pik_set_clrprop(p,&yymsp[-1].minor.yy0,yymsp[0].minor.yy153); }
#line 2579 "pikchr.c"
        break;
      case 33: /* attribute ::= go direction optrelexpr */
#line 627 "pikchr.y"
{ pik_add_direction(p,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy10);}
#line 2584 "pikchr.c"
        break;
      case 34: /* attribute ::= go direction even position */
#line 628 "pikchr.y"
{pik_evenwith(p,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy79);}
#line 2589 "pikchr.c"
        break;
      case 35: /* attribute ::= CLOSE */
#line 629 "pikchr.y"
{ pik_close_path(p,&yymsp[0].minor.yy0); }
#line 2594 "pikchr.c"
        break;
      case 36: /* attribute ::= CHOP */
#line 630 "pikchr.y"
{ p->cur->bChop = 1; }
#line 2599 "pikchr.c"
        break;
      case 37: /* attribute ::= FROM position */
#line 631 "pikchr.y"
{ pik_set_from(p,p->cur,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy79); }
#line 2604 "pikchr.c"
        break;
      case 38: /* attribute ::= TO position */
#line 632 "pikchr.y"
{ pik_add_to(p,p->cur,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy79); }
#line 2609 "pikchr.c"
        break;
      case 39: /* attribute ::= THEN */
#line 633 "pikchr.y"
{ pik_then(p, &yymsp[0].minor.yy0, p->cur); }
#line 2614 "pikchr.c"
        break;
      case 40: /* attribute ::= THEN optrelexpr HEADING expr */
      case 42: /* attribute ::= GO optrelexpr HEADING expr */ yytestcase(yyruleno==42);
#line 635 "pikchr.y"
{pik_move_hdg(p,&yymsp[-2].minor.yy10,&yymsp[-1].minor.yy0,yymsp[0].minor.yy153,0,&yymsp[-3].minor.yy0);}
#line 2620 "pikchr.c"
        break;
      case 41: /* attribute ::= THEN optrelexpr EDGEPT */
      case 43: /* attribute ::= GO optrelexpr EDGEPT */ yytestcase(yyruleno==43);
#line 636 "pikchr.y"
{pik_move_hdg(p,&yymsp[-1].minor.yy10,0,0,&yymsp[0].minor.yy0,&yymsp[-2].minor.yy0);}
#line 2626 "pikchr.c"
        break;
      case 44: /* attribute ::= AT position */
#line 641 "pikchr.y"
{ pik_set_at(p,0,&yymsp[0].minor.yy79,&yymsp[-1].minor.yy0); }
#line 2631 "pikchr.c"
        break;
      case 45: /* attribute ::= SAME */
#line 643 "pikchr.y"
{pik_same(p,0,&yymsp[0].minor.yy0);}
#line 2636 "pikchr.c"
        break;
      case 46: /* attribute ::= SAME AS object */
#line 644 "pikchr.y"
{pik_same(p,yymsp[0].minor.yy36,&yymsp[-2].minor.yy0);}
#line 2641 "pikchr.c"
        break;
      case 47: /* attribute ::= STRING textposition */
#line 645 "pikchr.y"
{pik_add_txt(p,&yymsp[-1].minor.yy0,yymsp[0].minor.yy164);}
#line 2646 "pikchr.c"
        break;
      case 48: /* attribute ::= FIT */
#line 646 "pikchr.y"
{pik_size_to_fit(p,&yymsp[0].minor.yy0,3); }
#line 2651 "pikchr.c"
        break;
      case 49: /* attribute ::= BEHIND object */
#line 647 "pikchr.y"
{pik_behind(p,yymsp[0].minor.yy36);}
#line 2656 "pikchr.c"
        break;
      case 50: /* withclause ::= DOT_E edge AT position */
      case 51: /* withclause ::= edge AT position */ yytestcase(yyruleno==51);
#line 655 "pikchr.y"
{ pik_set_at(p,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy79,&yymsp[-1].minor.yy0); }
#line 2662 "pikchr.c"
        break;
      case 52: /* numproperty ::= HEIGHT|WIDTH|RADIUS|DIAMETER|THICKNESS */
#line 659 "pikchr.y"
{yylhsminor.yy0 = yymsp[0].minor.yy0;}
#line 2667 "pikchr.c"
  yymsp[0].minor.yy0 = yylhsminor.yy0;
        break;
      case 53: /* boolproperty ::= CW */
#line 670 "pikchr.y"
{p->cur->cw = 1;}
#line 2673 "pikchr.c"
        break;
      case 54: /* boolproperty ::= CCW */
#line 671 "pikchr.y"
{p->cur->cw = 0;}
#line 2678 "pikchr.c"
        break;
      case 55: /* boolproperty ::= LARROW */
#line 672 "pikchr.y"
{p->cur->larrow=1; p->cur->rarrow=0; }
#line 2683 "pikchr.c"
        break;
      case 56: /* boolproperty ::= RARROW */
#line 673 "pikchr.y"
{p->cur->larrow=0; p->cur->rarrow=1; }
#line 2688 "pikchr.c"
        break;
      case 57: /* boolproperty ::= LRARROW */
#line 674 "pikchr.y"
{p->cur->larrow=1; p->cur->rarrow=1; }
#line 2693 "pikchr.c"
        break;
      case 58: /* boolproperty ::= INVIS */
#line 675 "pikchr.y"
{p->cur->sw = 0.0;}
#line 2698 "pikchr.c"
        break;
      case 59: /* boolproperty ::= THICK */
#line 676 "pikchr.y"
{p->cur->sw *= 1.5;}
#line 2703 "pikchr.c"
        break;
      case 60: /* boolproperty ::= THIN */
#line 677 "pikchr.y"
{p->cur->sw *= 0.67;}
#line 2708 "pikchr.c"
        break;
      case 61: /* boolproperty ::= SOLID */
#line 678 "pikchr.y"
{p->cur->sw = pik_value(p,"thickness",9,0);
                               p->cur->dotted = p->cur->dashed = 0.0;}
#line 2714 "pikchr.c"
        break;
      case 62: /* textposition ::= */
#line 681 "pikchr.y"
{yymsp[1].minor.yy164 = 0;}
#line 2719 "pikchr.c"
        break;
      case 63: /* textposition ::= textposition CENTER|LJUST|RJUST|ABOVE|BELOW|ITALIC|BOLD|ALIGNED|BIG|SMALL */
#line 684 "pikchr.y"
{yylhsminor.yy164 = (short int)pik_text_position(yymsp[-1].minor.yy164,&yymsp[0].minor.yy0);}
#line 2724 "pikchr.c"
  yymsp[-1].minor.yy164 = yylhsminor.yy164;
        break;
      case 64: /* position ::= expr COMMA expr */
#line 687 "pikchr.y"
{yylhsminor.yy79.x=yymsp[-2].minor.yy153; yylhsminor.yy79.y=yymsp[0].minor.yy153;}
#line 2730 "pikchr.c"
  yymsp[-2].minor.yy79 = yylhsminor.yy79;
        break;
      case 65: /* position ::= place PLUS expr COMMA expr */
#line 689 "pikchr.y"
{yylhsminor.yy79.x=yymsp[-4].minor.yy79.x+yymsp[-2].minor.yy153; yylhsminor.yy79.y=yymsp[-4].minor.yy79.y+yymsp[0].minor.yy153;}
#line 2736 "pikchr.c"
  yymsp[-4].minor.yy79 = yylhsminor.yy79;
        break;
      case 66: /* position ::= place MINUS expr COMMA expr */
#line 690 "pikchr.y"
{yylhsminor.yy79.x=yymsp[-4].minor.yy79.x-yymsp[-2].minor.yy153; yylhsminor.yy79.y=yymsp[-4].minor.yy79.y-yymsp[0].minor.yy153;}
#line 2742 "pikchr.c"
  yymsp[-4].minor.yy79 = yylhsminor.yy79;
        break;
      case 67: /* position ::= place PLUS LP expr COMMA expr RP */
#line 692 "pikchr.y"
{yylhsminor.yy79.x=yymsp[-6].minor.yy79.x+yymsp[-3].minor.yy153; yylhsminor.yy79.y=yymsp[-6].minor.yy79.y+yymsp[-1].minor.yy153;}
#line 2748 "pikchr.c"
  yymsp[-6].minor.yy79 = yylhsminor.yy79;
        break;
      case 68: /* position ::= place MINUS LP expr COMMA expr RP */
#line 694 "pikchr.y"
{yylhsminor.yy79.x=yymsp[-6].minor.yy79.x-yymsp[-3].minor.yy153; yylhsminor.yy79.y=yymsp[-6].minor.yy79.y-yymsp[-1].minor.yy153;}
#line 2754 "pikchr.c"
  yymsp[-6].minor.yy79 = yylhsminor.yy79;
        break;
      case 69: /* position ::= LP position COMMA position RP */
#line 695 "pikchr.y"
{yymsp[-4].minor.yy79.x=yymsp[-3].minor.yy79.x; yymsp[-4].minor.yy79.y=yymsp[-1].minor.yy79.y;}
#line 2760 "pikchr.c"
        break;
      case 70: /* position ::= LP position RP */
#line 696 "pikchr.y"
{yymsp[-2].minor.yy79=yymsp[-1].minor.yy79;}
#line 2765 "pikchr.c"
        break;
      case 71: /* position ::= expr between position AND position */
#line 698 "pikchr.y"
{yylhsminor.yy79 = pik_position_between(yymsp[-4].minor.yy153,yymsp[-2].minor.yy79,yymsp[0].minor.yy79);}
#line 2770 "pikchr.c"
  yymsp[-4].minor.yy79 = yylhsminor.yy79;
        break;
      case 72: /* position ::= expr LT position COMMA position GT */
#line 700 "pikchr.y"
{yylhsminor.yy79 = pik_position_between(yymsp[-5].minor.yy153,yymsp[-3].minor.yy79,yymsp[-1].minor.yy79);}
#line 2776 "pikchr.c"
  yymsp[-5].minor.yy79 = yylhsminor.yy79;
        break;
      case 73: /* position ::= expr ABOVE position */
#line 701 "pikchr.y"
{yylhsminor.yy79=yymsp[0].minor.yy79; yylhsminor.yy79.y += yymsp[-2].minor.yy153;}
#line 2782 "pikchr.c"
  yymsp[-2].minor.yy79 = yylhsminor.yy79;
        break;
      case 74: /* position ::= expr BELOW position */
#line 702 "pikchr.y"
{yylhsminor.yy79=yymsp[0].minor.yy79; yylhsminor.yy79.y -= yymsp[-2].minor.yy153;}
#line 2788 "pikchr.c"
  yymsp[-2].minor.yy79 = yylhsminor.yy79;
        break;
      case 75: /* position ::= expr LEFT OF position */
#line 703 "pikchr.y"
{yylhsminor.yy79=yymsp[0].minor.yy79; yylhsminor.yy79.x -= yymsp[-3].minor.yy153;}
#line 2794 "pikchr.c"
  yymsp[-3].minor.yy79 = yylhsminor.yy79;
        break;
      case 76: /* position ::= expr RIGHT OF position */
#line 704 "pikchr.y"
{yylhsminor.yy79=yymsp[0].minor.yy79; yylhsminor.yy79.x += yymsp[-3].minor.yy153;}
#line 2800 "pikchr.c"
  yymsp[-3].minor.yy79 = yylhsminor.yy79;
        break;
      case 77: /* position ::= expr ON HEADING EDGEPT OF position */
#line 706 "pikchr.y"
{yylhsminor.yy79 = pik_position_at_hdg(yymsp[-5].minor.yy153,&yymsp[-2].minor.yy0,yymsp[0].minor.yy79);}
#line 2806 "pikchr.c"
  yymsp[-5].minor.yy79 = yylhsminor.yy79;
        break;
      case 78: /* position ::= expr HEADING EDGEPT OF position */
#line 708 "pikchr.y"
{yylhsminor.yy79 = pik_position_at_hdg(yymsp[-4].minor.yy153,&yymsp[-2].minor.yy0,yymsp[0].minor.yy79);}
#line 2812 "pikchr.c"
  yymsp[-4].minor.yy79 = yylhsminor.yy79;
        break;
      case 79: /* position ::= expr EDGEPT OF position */
#line 710 "pikchr.y"
{yylhsminor.yy79 = pik_position_at_hdg(yymsp[-3].minor.yy153,&yymsp[-2].minor.yy0,yymsp[0].minor.yy79);}
#line 2818 "pikchr.c"
  yymsp[-3].minor.yy79 = yylhsminor.yy79;
        break;
      case 80: /* position ::= expr ON HEADING expr FROM position */
#line 712 "pikchr.y"
{yylhsminor.yy79 = pik_position_at_angle(yymsp[-5].minor.yy153,yymsp[-2].minor.yy153,yymsp[0].minor.yy79);}
#line 2824 "pikchr.c"
  yymsp[-5].minor.yy79 = yylhsminor.yy79;
        break;
      case 81: /* position ::= expr HEADING expr FROM position */
#line 714 "pikchr.y"
{yylhsminor.yy79 = pik_position_at_angle(yymsp[-4].minor.yy153,yymsp[-2].minor.yy153,yymsp[0].minor.yy79);}
#line 2830 "pikchr.c"
  yymsp[-4].minor.yy79 = yylhsminor.yy79;
        break;
      case 82: /* place ::= edge OF object */
#line 726 "pikchr.y"
{yylhsminor.yy79 = pik_place_of_elem(p,yymsp[0].minor.yy36,&yymsp[-2].minor.yy0);}
#line 2836 "pikchr.c"
  yymsp[-2].minor.yy79 = yylhsminor.yy79;
        break;
      case 83: /* place2 ::= object */
#line 727 "pikchr.y"
{yylhsminor.yy79 = pik_place_of_elem(p,yymsp[0].minor.yy36,0);}
#line 2842 "pikchr.c"
  yymsp[0].minor.yy79 = yylhsminor.yy79;
        break;
      case 84: /* place2 ::= object DOT_E edge */
#line 728 "pikchr.y"
{yylhsminor.yy79 = pik_place_of_elem(p,yymsp[-2].minor.yy36,&yymsp[0].minor.yy0);}
#line 2848 "pikchr.c"
  yymsp[-2].minor.yy79 = yylhsminor.yy79;
        break;
      case 85: /* place2 ::= NTH VERTEX OF object */
#line 729 "pikchr.y"
{yylhsminor.yy79 = pik_nth_vertex(p,&yymsp[-3].minor.yy0,&yymsp[-2].minor.yy0,yymsp[0].minor.yy36);}
#line 2854 "pikchr.c"
  yymsp[-3].minor.yy79 = yylhsminor.yy79;
        break;
      case 86: /* object ::= nth */
#line 741 "pikchr.y"
{yylhsminor.yy36 = pik_find_nth(p,0,&yymsp[0].minor.yy0);}
#line 2860 "pikchr.c"
  yymsp[0].minor.yy36 = yylhsminor.yy36;
        break;
      case 87: /* object ::= nth OF|IN object */
#line 742 "pikchr.y"
{yylhsminor.yy36 = pik_find_nth(p,yymsp[0].minor.yy36,&yymsp[-2].minor.yy0);}
#line 2866 "pikchr.c"
  yymsp[-2].minor.yy36 = yylhsminor.yy36;
        break;
      case 88: /* objectname ::= THIS */
#line 744 "pikchr.y"
{yymsp[0].minor.yy36 = p->cur;}
#line 2872 "pikchr.c"
        break;
      case 89: /* objectname ::= PLACENAME */
#line 745 "pikchr.y"
{yylhsminor.yy36 = pik_find_byname(p,0,&yymsp[0].minor.yy0);}
#line 2877 "pikchr.c"
  yymsp[0].minor.yy36 = yylhsminor.yy36;
        break;
      case 90: /* objectname ::= objectname DOT_U PLACENAME */
#line 747 "pikchr.y"
{yylhsminor.yy36 = pik_find_byname(p,yymsp[-2].minor.yy36,&yymsp[0].minor.yy0);}
#line 2883 "pikchr.c"
  yymsp[-2].minor.yy36 = yylhsminor.yy36;
        break;
      case 91: /* nth ::= NTH CLASSNAME */
#line 749 "pikchr.y"
{yylhsminor.yy0=yymsp[0].minor.yy0; yylhsminor.yy0.eCode = pik_nth_value(p,&yymsp[-1].minor.yy0); }
#line 2889 "pikchr.c"
  yymsp[-1].minor.yy0 = yylhsminor.yy0;
        break;
      case 92: /* nth ::= NTH LAST CLASSNAME */
#line 750 "pikchr.y"
{yylhsminor.yy0=yymsp[0].minor.yy0; yylhsminor.yy0.eCode = -pik_nth_value(p,&yymsp[-2].minor.yy0); }
#line 2895 "pikchr.c"
  yymsp[-2].minor.yy0 = yylhsminor.yy0;
        break;
      case 93: /* nth ::= LAST CLASSNAME */
#line 751 "pikchr.y"
{yymsp[-1].minor.yy0=yymsp[0].minor.yy0; yymsp[-1].minor.yy0.eCode = -1;}
#line 2901 "pikchr.c"
        break;
      case 94: /* nth ::= LAST */
#line 752 "pikchr.y"
{yylhsminor.yy0=yymsp[0].minor.yy0; yylhsminor.yy0.eCode = -1;}
#line 2906 "pikchr.c"
  yymsp[0].minor.yy0 = yylhsminor.yy0;
        break;
      case 95: /* nth ::= NTH LB RB */
#line 753 "pikchr.y"
{yylhsminor.yy0=yymsp[-1].minor.yy0; yylhsminor.yy0.eCode = pik_nth_value(p,&yymsp[-2].minor.yy0);}
#line 2912 "pikchr.c"
  yymsp[-2].minor.yy0 = yylhsminor.yy0;
        break;
      case 96: /* nth ::= NTH LAST LB RB */
#line 754 "pikchr.y"
{yylhsminor.yy0=yymsp[-1].minor.yy0; yylhsminor.yy0.eCode = -pik_nth_value(p,&yymsp[-3].minor.yy0);}
#line 2918 "pikchr.c"
  yymsp[-3].minor.yy0 = yylhsminor.yy0;
        break;
      case 97: /* nth ::= LAST LB RB */
#line 755 "pikchr.y"
{yymsp[-2].minor.yy0=yymsp[-1].minor.yy0; yymsp[-2].minor.yy0.eCode = -1; }
#line 2924 "pikchr.c"
        break;
      case 98: /* expr ::= expr PLUS expr */
#line 757 "pikchr.y"
{yylhsminor.yy153=yymsp[-2].minor.yy153+yymsp[0].minor.yy153;}
#line 2929 "pikchr.c"
  yymsp[-2].minor.yy153 = yylhsminor.yy153;
        break;
      case 99: /* expr ::= expr MINUS expr */
#line 758 "pikchr.y"
{yylhsminor.yy153=yymsp[-2].minor.yy153-yymsp[0].minor.yy153;}
#line 2935 "pikchr.c"
  yymsp[-2].minor.yy153 = yylhsminor.yy153;
        break;
      case 100: /* expr ::= expr STAR expr */
#line 759 "pikchr.y"
{yylhsminor.yy153=yymsp[-2].minor.yy153*yymsp[0].minor.yy153;}
#line 2941 "pikchr.c"
  yymsp[-2].minor.yy153 = yylhsminor.yy153;
        break;
      case 101: /* expr ::= expr SLASH expr */
#line 760 "pikchr.y"
{
  if( yymsp[0].minor.yy153==0.0 ){ pik_error(p, &yymsp[-1].minor.yy0, "division by zero"); yylhsminor.yy153 = 0.0; }
  else{ yylhsminor.yy153 = yymsp[-2].minor.yy153/yymsp[0].minor.yy153; }
}
#line 2950 "pikchr.c"
  yymsp[-2].minor.yy153 = yylhsminor.yy153;
        break;
      case 102: /* expr ::= MINUS expr */
#line 764 "pikchr.y"
{yymsp[-1].minor.yy153=-yymsp[0].minor.yy153;}
#line 2956 "pikchr.c"
        break;
      case 103: /* expr ::= PLUS expr */
#line 765 "pikchr.y"
{yymsp[-1].minor.yy153=yymsp[0].minor.yy153;}
#line 2961 "pikchr.c"
        break;
      case 104: /* expr ::= LP expr RP */
#line 766 "pikchr.y"
{yymsp[-2].minor.yy153=yymsp[-1].minor.yy153;}
#line 2966 "pikchr.c"
        break;
      case 105: /* expr ::= LP FILL|COLOR|THICKNESS RP */
#line 767 "pikchr.y"
{yymsp[-2].minor.yy153=pik_get_var(p,&yymsp[-1].minor.yy0);}
#line 2971 "pikchr.c"
        break;
      case 106: /* expr ::= NUMBER */
#line 768 "pikchr.y"
{yylhsminor.yy153=pik_atof(&yymsp[0].minor.yy0);}
#line 2976 "pikchr.c"
  yymsp[0].minor.yy153 = yylhsminor.yy153;
        break;
      case 107: /* expr ::= ID */
#line 769 "pikchr.y"
{yylhsminor.yy153=pik_get_var(p,&yymsp[0].minor.yy0);}
#line 2982 "pikchr.c"
  yymsp[0].minor.yy153 = yylhsminor.yy153;
        break;
      case 108: /* expr ::= FUNC1 LP expr RP */
#line 770 "pikchr.y"
{yylhsminor.yy153 = pik_func(p,&yymsp[-3].minor.yy0,yymsp[-1].minor.yy153,0.0);}
#line 2988 "pikchr.c"
  yymsp[-3].minor.yy153 = yylhsminor.yy153;
        break;
      case 109: /* expr ::= FUNC2 LP expr COMMA expr RP */
#line 771 "pikchr.y"
{yylhsminor.yy153 = pik_func(p,&yymsp[-5].minor.yy0,yymsp[-3].minor.yy153,yymsp[-1].minor.yy153);}
#line 2994 "pikchr.c"
  yymsp[-5].minor.yy153 = yylhsminor.yy153;
        break;
      case 110: /* expr ::= DIST LP position COMMA position RP */
#line 772 "pikchr.y"
{yymsp[-5].minor.yy153 = pik_dist(&yymsp[-3].minor.yy79,&yymsp[-1].minor.yy79);}
#line 3000 "pikchr.c"
        break;
      case 111: /* expr ::= place2 DOT_XY X */
#line 773 "pikchr.y"
{yylhsminor.yy153 = yymsp[-2].minor.yy79.x;}
#line 3005 "pikchr.c"
  yymsp[-2].minor.yy153 = yylhsminor.yy153;
        break;
      case 112: /* expr ::= place2 DOT_XY Y */
#line 774 "pikchr.y"
{yylhsminor.yy153 = yymsp[-2].minor.yy79.y;}
#line 3011 "pikchr.c"
  yymsp[-2].minor.yy153 = yylhsminor.yy153;
        break;
      case 113: /* expr ::= object DOT_L numproperty */
      case 114: /* expr ::= object DOT_L dashproperty */ yytestcase(yyruleno==114);
      case 115: /* expr ::= object DOT_L colorproperty */ yytestcase(yyruleno==115);
#line 775 "pikchr.y"
{yylhsminor.yy153=pik_property_of(yymsp[-2].minor.yy36,&yymsp[0].minor.yy0);}
#line 3019 "pikchr.c"
  yymsp[-2].minor.yy153 = yylhsminor.yy153;
        break;
      default:
      /* (116) lvalue ::= ID */ yytestcase(yyruleno==116);
      /* (117) lvalue ::= FILL */ yytestcase(yyruleno==117);
      /* (118) lvalue ::= COLOR */ yytestcase(yyruleno==118);
      /* (119) lvalue ::= THICKNESS */ yytestcase(yyruleno==119);

  if( TOKEN.z && TOKEN.z[0] ){
    pik_error(p, &TOKEN, "syntax error");
  }else{
    pik_error(p, 0, "syntax error");
  }
  UNUSED_PARAMETER(yymajor);
#line 3130 "pikchr.c"
/************ End %syntax_error code ******************************************/
  pik_parserARG_STORE /* Suppress warning about unused %extra_argument variable */
  pik_parserCTX_STORE
}

/*
** The following is executed when the parser accepts

    }else{
      fprintf(yyTraceFILE,"%sInput '%s' with pending reduce %d\n",
              yyTracePrompt,yyTokenName[yymajor],yyact-YY_MIN_REDUCE);
    }
  }
#endif

  while(1){ /* Exit by "break" */
    assert( yypParser->yytos>=yypParser->yystack );
    assert( yyact==yypParser->yytos->stateno );
    yyact = yy_find_shift_action((YYCODETYPE)yymajor,yyact);
    if( yyact >= YY_MIN_REDUCE ){
      unsigned int yyruleno = yyact - YY_MIN_REDUCE; /* Reduce by this rule */
#ifndef NDEBUG
      assert( yyruleno<(int)(sizeof(yyRuleName)/sizeof(yyRuleName[0])) );
      if( yyTraceFILE ){
        int yysize = yyRuleInfoNRhs[yyruleno];
        if( yysize ){
          fprintf(yyTraceFILE, "%sReduce %d [%s]%s, pop back to state %d.\n",
            yyTracePrompt,
            yyruleno, yyRuleName[yyruleno],
            yyruleno<YYNRULE_WITH_ACTION ? "" : " without external action",
            yypParser->yytos[yysize].stateno);
        }else{
          fprintf(yyTraceFILE, "%sReduce %d [%s]%s.\n",
            yyTracePrompt, yyruleno, yyRuleName[yyruleno],
            yyruleno<YYNRULE_WITH_ACTION ? "" : " without external action");
        }
      }
#endif /* NDEBUG */

      /* Check that the stack is large enough to grow by a single entry
      ** if the RHS of the rule is empty.  This ensures that there is room
      ** enough on the stack to push the LHS value */
      if( yyRuleInfoNRhs[yyruleno]==0 ){
#ifdef YYTRACKMAXSTACKDEPTH
        if( (int)(yypParser->yytos - yypParser->yystack)>yypParser->yyhwm ){
          yypParser->yyhwm++;
          assert( yypParser->yyhwm ==
                  (int)(yypParser->yytos - yypParser->yystack));
        }
#endif
#if YYSTACKDEPTH>0 
        if( yypParser->yytos>=yypParser->yystackEnd ){
          yyStackOverflow(yypParser);
          break;
        }
#else
        if( yypParser->yytos>=&yypParser->yystack[yypParser->yystksz-1] ){
          if( yyGrowStack(yypParser) ){
            yyStackOverflow(yypParser);
            break;
          }
        }
#endif
      }
      yyact = yy_reduce(yypParser,yyruleno,yymajor,yyminor pik_parserCTX_PARAM);
    }else if( yyact <= YY_MAX_SHIFTREDUCE ){
      yy_shift(yypParser,yyact,(YYCODETYPE)yymajor,yyminor);
#ifndef YYNOERRORRECOVERY
      yypParser->yyerrcnt--;
#endif
      break;
    }else if( yyact==YY_ACCEPT_ACTION ){

          fprintf(yyTraceFILE,"%sDiscard input token %s\n",
             yyTracePrompt,yyTokenName[yymajor]);
        }
#endif
        yy_destructor(yypParser, (YYCODETYPE)yymajor, &yyminorunion);
        yymajor = YYNOCODE;
      }else{
        while( yypParser->yytos > yypParser->yystack ){
          yyact = yy_find_reduce_action(yypParser->yytos->stateno,

                                        YYERRORSYMBOL);

          if( yyact<=YY_MAX_SHIFTREDUCE ) break;
          yy_pop_parser_stack(yypParser);
        }
        if( yypParser->yytos <= yypParser->yystack || yymajor==0 ){
          yy_destructor(yypParser,(YYCODETYPE)yymajor,&yyminorunion);
          yy_parse_failed(yypParser);
#ifndef YYNOERRORRECOVERY
          yypParser->yyerrcnt = -1;
#endif
          yymajor = YYNOCODE;
        }else if( yymx!=YYERRORSYMBOL ){

#ifndef YYNOERRORRECOVERY
        yypParser->yyerrcnt = -1;
#endif
      }
      break;
#endif
    }

  }
#ifndef NDEBUG
  if( yyTraceFILE ){
    yyStackEntry *i;
    char cDiv = '[';
    fprintf(yyTraceFILE,"%sReturn. Stack=",yyTracePrompt);
    for(i=&yypParser->yystack[1]; i<=yypParser->yytos; i++){
      fprintf(yyTraceFILE,"%c%s", cDiv, yyTokenName[i->major]);

  return TCL_OK;
}


#endif /* PIKCHR_TCL */


#line 8153 "pikchr.c"

var wasmMemory;

var ABORT = false;

var EXITSTATUS;



































































var UTF8Decoder = typeof TextDecoder != "undefined" ? new TextDecoder("utf8") : undefined;

function UTF8ArrayToString(heapOrArray, idx, maxBytesToRead) {
 var endIdx = idx + maxBytesToRead;
 var endPtr = idx;
 while (heapOrArray[endPtr] && !(endPtr >= endIdx)) ++endPtr;
 if (endPtr - idx > 16 && heapOrArray.buffer && UTF8Decoder) {
  return UTF8Decoder.decode(heapOrArray.subarray(idx, endPtr));

 }
 var str = "";
 while (idx < endPtr) {
  var u0 = heapOrArray[idx++];
  if (!(u0 & 128)) {
   str += String.fromCharCode(u0);
   continue;
  }
  var u1 = heapOrArray[idx++] & 63;
  if ((u0 & 224) == 192) {
   str += String.fromCharCode((u0 & 31) << 6 | u1);
   continue;
  }
  var u2 = heapOrArray[idx++] & 63;
  if ((u0 & 240) == 224) {
   u0 = (u0 & 15) << 12 | u1 << 6 | u2;
  } else {
   u0 = (u0 & 7) << 18 | u1 << 12 | u2 << 6 | heapOrArray[idx++] & 63;
  }
  if (u0 < 65536) {
   str += String.fromCharCode(u0);
  } else {
   var ch = u0 - 65536;
   str += String.fromCharCode(55296 | ch >> 10, 56320 | ch & 1023);

  }
 }
 return str;
}

function UTF8ToString(ptr, maxBytesToRead) {
 return ptr ? UTF8ArrayToString(HEAPU8, ptr, maxBytesToRead) : "";

 return outIdx - startIdx;
}

function stringToUTF8(str, outPtr, maxBytesToWrite) {
 return stringToUTF8Array(str, HEAPU8, outPtr, maxBytesToWrite);
}





var buffer, HEAP8, HEAPU8, HEAP16, HEAPU16, HEAP32, HEAPU32, HEAPF32, HEAPF64;

function updateGlobalBufferAndViews(buf) {
 buffer = buf;
 Module["HEAP8"] = HEAP8 = new Int8Array(buf);
 Module["HEAP16"] = HEAP16 = new Int16Array(buf);
 Module["HEAP32"] = HEAP32 = new Int32Array(buf);

function getBinary(file) {
 try {
  if (file == wasmBinaryFile && wasmBinary) {
   return new Uint8Array(wasmBinary);
  }
  if (readBinary) {
   return readBinary(file);


  }
  throw "both async and sync fetching of the wasm failed";
 } catch (err) {
  abort(err);
 }
}

function getBinaryPromise() {
 if (!wasmBinary && (ENVIRONMENT_IS_WEB || ENVIRONMENT_IS_WORKER)) {

 instantiateAsync().catch(readyPromiseReject);
 return {};
}

var tempDouble;

var tempI64;

function ExitStatus(status) {
 this.name = "ExitStatus";
 this.message = "Program terminated with exit(" + status + ")";
 this.status = status;
}

function callRuntimeCallbacks(callbacks) {
 while (callbacks.length > 0) {
  callbacks.shift()(Module);














 }
}

function getValue(ptr, type = "i8") {
 if (type.endsWith("*")) type = "*";
 switch (type) {
 case "i1":
  return HEAP8[ptr >> 0];

 case "i8":
  return HEAP8[ptr >> 0];

 case "i16":
  return HEAP16[ptr >> 1];

 case "i32":
  return HEAP32[ptr >> 2];

 case "i64":
  return HEAP32[ptr >> 2];

 case "float":
  return HEAPF32[ptr >> 2];

 case "double":
  return HEAPF64[ptr >> 3];

 case "*":
  return HEAPU32[ptr >> 2];

 default:
  abort("invalid type for getValue: " + type);
 }
 return null;
}





function setValue(ptr, value, type = "i8") {
 if (type.endsWith("*")) type = "*";
 switch (type) {
 case "i1":
  HEAP8[ptr >> 0] = value;
  break;

 case "i8":
  HEAP8[ptr >> 0] = value;

 case "float":
  HEAPF32[ptr >> 2] = value;
  break;

 case "double":
  HEAPF64[ptr >> 3] = value;
  break;

 case "*":
  HEAPU32[ptr >> 2] = value;
  break;

 default:
  abort("invalid type for setValue: " + type);
 }
}

function writeArrayToMemory(array, buffer) {
 HEAP8.set(array, buffer);
}

function ___assert_fail(condition, filename, line, func) {
 abort("Assertion failed: " + UTF8ToString(condition) + ", at: " + [ filename ? UTF8ToString(filename) : "unknown filename", line, func ? UTF8ToString(func) : "unknown function" ]);
}

function abortOnCannotGrowMemory(requestedSize) {
 abort("OOM");
}

function _emscripten_resize_heap(requestedSize) {
 var oldSize = HEAPU8.length;
 requestedSize = requestedSize >>> 0;
 abortOnCannotGrowMemory(requestedSize);
}

var SYSCALLS = {
 varargs: undefined,
 get: function() {
  SYSCALLS.varargs += 4;
  var ret = HEAP32[SYSCALLS.varargs - 4 >> 2];
  return ret;
 },
 getStr: function(ptr) {
  var ret = UTF8ToString(ptr);
  return ret;
 }
};

function _proc_exit(code) {
 EXITSTATUS = code;
 if (!keepRuntimeAlive()) {
  if (Module["onExit"]) Module["onExit"](code);
  ABORT = true;
 }
 quit_(code, new ExitStatus(code));
}

function exitJS(status, implicit) {
 EXITSTATUS = status;
 _proc_exit(status);
}

var _exit = exitJS;

function getCFunc(ident) {
 var func = Module["_" + ident];
 return func;
}

function ccall(ident, returnType, argTypes, args, opts) {
 var toC = {
  "string": str => {
   var ret = 0;
   if (str !== null && str !== undefined && str !== 0) {
    var len = (str.length << 2) + 1;
    ret = stackAlloc(len);
    stringToUTF8(str, ret, len);
   }
   return ret;
  },
  "array": arr => {
   var ret = stackAlloc(arr.length);
   writeArrayToMemory(arr, ret);
   return ret;
  }
 };
 function convertReturnValue(ret) {
  if (returnType === "string") {
   return UTF8ToString(ret);
  }
  if (returnType === "boolean") return Boolean(ret);
  return ret;
 }
 var func = getCFunc(ident);
 var cArgs = [];
 var stack = 0;
 if (args) {
  for (var i = 0; i < args.length; i++) {
   var converter = toC[argTypes[i]];
   if (converter) {
    if (stack === 0) stack = stackSave();
    cArgs[i] = converter(args[i]);
   } else {
    cArgs[i] = args[i];
   }
  }
 }
 var ret = func.apply(null, cArgs);
 function onDone(ret) {
  if (stack !== 0) stackRestore(stack);
  return convertReturnValue(ret);
 }
 ret = onDone(ret);
 return ret;
}

function cwrap(ident, returnType, argTypes, opts) {
 argTypes = argTypes || [];
 var numericArgs = argTypes.every(type => type === "number" || type === "boolean");
 var numericRet = returnType !== "string";
 if (numericRet && numericArgs && !opts) {
  return getCFunc(ident);
 }
 return function() {
  return ccall(ident, returnType, argTypes, arguments, opts);
 };
}

var asmLibraryArg = {
 "a": ___assert_fail,
 "b": _emscripten_resize_heap,
 "c": _exit
};

 return (stackRestore = Module["stackRestore"] = Module["asm"]["i"]).apply(null, arguments);
};

var stackAlloc = Module["stackAlloc"] = function() {
 return (stackAlloc = Module["stackAlloc"] = Module["asm"]["j"]).apply(null, arguments);
};



Module["stackSave"] = stackSave;

Module["stackRestore"] = stackRestore;

Module["cwrap"] = cwrap;

Module["setValue"] = setValue;

Module["getValue"] = getValue;

var calledRun;







dependenciesFulfilled = function runCaller() {
 if (!calledRun) run();
 if (!calledRun) dependenciesFulfilled = runCaller;
};

function run(args) {
 args = args || arguments_;

   doRun();
  }, 1);
 } else {
  doRun();
 }
}

















if (Module["preInit"]) {
 if (typeof Module["preInit"] == "function") Module["preInit"] = [ Module["preInit"] ];
 while (Module["preInit"].length > 0) {
  Module["preInit"].pop()();
 }
}

** Determine if we are dealing with WinRT, which provides only a subset of
** the full Win32 API.
*/
#if !defined(SQLITE_OS_WINRT)
# define SQLITE_OS_WINRT 0
#endif

/*
** If SQLITE_SHELL_FIDDLE is defined then the shell is modified
** somewhat for use as a WASM module in a web browser. This flag
** should only be used when building the "fiddle" web application, as
** the browser-mode build has much different user input requirements
** and this build mode rewires the user input subsystem to account for
** that.
*/

/*
** Warning pragmas copied from msvc.h in the core.
*/
#if defined(_MSC_VER)
#pragma warning(disable : 4054)
#pragma warning(disable : 4055)
#pragma warning(disable : 4100)

#ifndef SQLITE_DISABLE_LFS
# define _LARGE_FILE       1
# ifndef _FILE_OFFSET_BITS
#   define _FILE_OFFSET_BITS 64
# endif
# define _LARGEFILE_SOURCE 1
#endif

#if defined(SQLITE_SHELL_FIDDLE) && !defined(_POSIX_SOURCE)
/*
** emcc requires _POSIX_SOURCE (or one of several similar defines)
** to expose strdup().
*/
# define _POSIX_SOURCE
#endif

#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include <assert.h>
#include "sqlite3.h"
typedef sqlite3_int64 i64;

  _setmode(_fileno(file), _O_TEXT);
}
#else
# define setBinaryMode(X,Y)
# define setTextMode(X,Y)
#endif

/* True if the timer is enabled */
static int enableTimer = 0;

/* A version of strcmp() that works with NULL values */
static int cli_strcmp(const char *a, const char *b){
  if( a==0 ) a = "";



  if( b==0 ) b = "";
  return strcmp(a,b);
}

static int cli_strncmp(const char *a, const char *b, size_t n){
  if( a==0 ) a = "";
  if( b==0 ) b = "";
  return strncmp(a,b,n);
}

/* Return the current wall-clock time */
static sqlite3_int64 timeOfDay(void){
  static sqlite3_vfs *clockVfs = 0;
  sqlite3_int64 t;
  if( clockVfs==0 ) clockVfs = sqlite3_vfs_find(0);
  if( clockVfs==0 ) return 0;  /* Never actually happens */

  }
#if defined(_WIN32) || defined(WIN32)
  /* For interactive input on Windows systems, translate the
  ** multi-byte characterset characters into UTF-8. */
  if( stdin_is_interactive && in==stdin ){
    char *zTrans = sqlite3_win32_mbcs_to_utf8_v2(zLine, 0);
    if( zTrans ){
      i64 nTrans = strlen(zTrans)+1;
      if( nTrans>nLine ){
        zLine = realloc(zLine, nTrans);
        shell_check_oom(zLine);
      }
      memcpy(zLine, zTrans, nTrans);
      sqlite3_free(zTrans);
    }

** If zPrior is not NULL then it is a buffer from a prior call to this
** routine that can be reused.
**
** The result is stored in space obtained from malloc() and must either
** be freed by the caller or else passed back into this routine via the
** zPrior argument for reuse.
*/
#ifndef SQLITE_SHELL_FIDDLE
static char *one_input_line(FILE *in, char *zPrior, int isContinuation){
  char *zPrompt;
  char *zResult;
  if( in!=0 ){
    zResult = local_getline(zPrior, in);
  }else{
    zPrompt = isContinuation ? continuePrompt : mainPrompt;
#if SHELL_USE_LOCAL_GETLINE
    printf("%s", zPrompt);
    fflush(stdout);
    zResult = local_getline(zPrior, stdin);
#else
    free(zPrior);
    zResult = shell_readline(zPrompt);
    if( zResult && *zResult ) shell_add_history(zResult);
#endif
  }
  return zResult;
}
#endif /* !SQLITE_SHELL_FIDDLE */

/*
** Return the value of a hexadecimal digit.  Return -1 if the input
** is not a hex digit.
*/
static int hexDigitValue(char c){
  if( c>='0' && c<='9' ) return c - '0';

** added to zIn, and the result returned in memory obtained from malloc().
** zIn, if it was not NULL, is freed.
**
** If the third argument, quote, is not '\0', then it is used as a
** quote character for zAppend.
*/
static void appendText(ShellText *p, const char *zAppend, char quote){
  i64 len;
  i64 i;
  i64 nAppend = strlen30(zAppend);

  len = nAppend+p->n+1;
  if( quote ){
    len += 2;
    for(i=0; i<nAppend; i++){
      if( zAppend[i]==quote ) len++;
    }

  };
  int i = 0;
  const char *zIn = (const char*)sqlite3_value_text(apVal[0]);
  const char *zSchema = (const char*)sqlite3_value_text(apVal[1]);
  const char *zName = (const char*)sqlite3_value_text(apVal[2]);
  sqlite3 *db = sqlite3_context_db_handle(pCtx);
  UNUSED_PARAMETER(nVal);
  if( zIn!=0 && cli_strncmp(zIn, "CREATE ", 7)==0 ){
    for(i=0; i<ArraySize(aPrefix); i++){
      int n = strlen30(aPrefix[i]);
      if( cli_strncmp(zIn+7, aPrefix[i], n)==0 && zIn[n+7]==' ' ){
        char *z = 0;
        char *zFake = 0;
        if( zSchema ){
          char cQuote = quoteChar(zSchema);
          if( cQuote && sqlite3_stricmp(zSchema,"temp")!=0 ){
            z = sqlite3_mprintf("%.*s \"%w\".%s", n+7, zIn, zSchema, zIn+n+8);
          }else{

*/
#define re_match   sqlite3re_match
#define re_compile sqlite3re_compile
#define re_free    sqlite3re_free

/* The end-of-input character */
#define RE_EOF            0    /* End of input */
#define RE_START  0xfffffff    /* Start of input - larger than an UTF-8 */

/* The NFA is implemented as sequence of opcodes taken from the following
** set.  Each opcode has a single integer argument.
*/
#define RE_OP_MATCH       1    /* Match the one character in the argument */
#define RE_OP_ANY         2    /* Match any one character.  (Implements ".") */
#define RE_OP_ANYSTAR     3    /* Special optimized version of .* */

#define RE_OP_WORD       11    /* Perl word character [A-Za-z0-9_] */
#define RE_OP_NOTWORD    12    /* Not a perl word character */
#define RE_OP_DIGIT      13    /* digit:  [0-9] */
#define RE_OP_NOTDIGIT   14    /* Not a digit */
#define RE_OP_SPACE      15    /* space:  [ \t\n\r\v\f] */
#define RE_OP_NOTSPACE   16    /* Not a digit */
#define RE_OP_BOUNDARY   17    /* Boundary between word and non-word */
#define RE_OP_ATSTART    18    /* Currently at the start of the string */

#if defined(SQLITE_DEBUG)
/* Opcode names used for symbolic debugging */
static const char *ReOpName[] = {
  "EOF",
  "MATCH",
  "ANY",
  "ANYSTAR",
  "FORK",
  "GOTO",
  "ACCEPT",
  "CC_INC",
  "CC_EXC",
  "CC_VALUE",
  "CC_RANGE",
  "WORD",
  "NOTWORD",
  "DIGIT",
  "NOTDIGIT",
  "SPACE",
  "NOTSPACE",
  "BOUNDARY",
  "ATSTART",
};
#endif /* SQLITE_DEBUG */


/* Each opcode is a "state" in the NFA */
typedef unsigned short ReStateNumber;

/* Because this is an NFA and not a DFA, multiple states can be active at
** once.  An instance of the following object records all active states in
** the NFA.  The implementation is optimized for the common case where the

struct ReCompiled {
  ReInput sIn;                /* Regular expression text */
  const char *zErr;           /* Error message to return */
  char *aOp;                  /* Operators for the virtual machine */
  int *aArg;                  /* Arguments to each operator */
  unsigned (*xNextChar)(ReInput*);  /* Next character function */
  unsigned char zInit[12];    /* Initial text to match */
  int nInit;                  /* Number of bytes in zInit */
  unsigned nState;            /* Number of entries in aOp[] and aArg[] */
  unsigned nAlloc;            /* Slots allocated for aOp[] and aArg[] */
};

/* Add a state to the given state set if it is not already there */
static void re_add_state(ReStateSet *pSet, int newState){
  unsigned i;

*/
static int re_match(ReCompiled *pRe, const unsigned char *zIn, int nIn){
  ReStateSet aStateSet[2], *pThis, *pNext;
  ReStateNumber aSpace[100];
  ReStateNumber *pToFree;
  unsigned int i = 0;
  unsigned int iSwap = 0;
  int c = RE_START;
  int cPrev = 0;
  int rc = 0;
  ReInput in;

  in.z = zIn;
  in.i = 0;
  in.mx = nIn>=0 ? nIn : (int)strlen((char const*)zIn);

  /* Look for the initial prefix match, if there is one. */
  if( pRe->nInit ){
    unsigned char x = pRe->zInit[0];
    while( in.i+pRe->nInit<=in.mx 
     && (zIn[in.i]!=x ||
         strncmp((const char*)zIn+in.i, (const char*)pRe->zInit, pRe->nInit)!=0)
    ){
      in.i++;
    }
    if( in.i+pRe->nInit>in.mx ) return 0;
    c = RE_START-1;
  }

  if( pRe->nState<=(sizeof(aSpace)/(sizeof(aSpace[0])*2)) ){
    pToFree = 0;
    aStateSet[0].aState = aSpace;
  }else{
    pToFree = sqlite3_malloc64( sizeof(ReStateNumber)*2*pRe->nState );

    pNext->nState = 0;
    for(i=0; i<pThis->nState; i++){
      int x = pThis->aState[i];
      switch( pRe->aOp[x] ){
        case RE_OP_MATCH: {
          if( pRe->aArg[x]==c ) re_add_state(pNext, x+1);
          break;
        }
        case RE_OP_ATSTART: {
          if( cPrev==RE_START ) re_add_state(pThis, x+1);
          break;
        }
        case RE_OP_ANY: {
          if( c!=0 ) re_add_state(pNext, x+1);
          break;
        }
        case RE_OP_WORD: {
          if( re_word_char(c) ) re_add_state(pNext, x+1);

          if( hit ) re_add_state(pNext, x+n);
          break;
        }
      }
    }
  }
  for(i=0; i<pNext->nState; i++){
    int x = pNext->aState[i];
    while( pRe->aOp[x]==RE_OP_GOTO ) x += pRe->aArg[x];
    if( pRe->aOp[x]==RE_OP_ACCEPT ){ rc = 1; break; }
  }
re_match_end:
  sqlite3_free(pToFree);
  return rc;
}

/* Resize the opcode and argument arrays for an RE under construction.

  int iStart;
  unsigned c;
  const char *zErr;
  while( (c = p->xNextChar(&p->sIn))!=0 ){
    iStart = p->nState;
    switch( c ){
      case '|':

      case ')': {
        p->sIn.i--;
        return 0;
      }
      case '(': {
        zErr = re_subcompile_re(p);
        if( zErr ) return zErr;

        re_append(p, RE_OP_FORK, iPrev - p->nState);
        break;
      }
      case '?': {
        if( iPrev<0 ) return "'?' without operand";
        re_insert(p, iPrev, RE_OP_FORK, p->nState - iPrev+1);
        break;
      }
      case '$': {
        re_append(p, RE_OP_MATCH, RE_EOF);
        break;
      }
      case '^': {
        re_append(p, RE_OP_ATSTART, 0);
        break;
      }
      case '{': {
        int m = 0, n = 0;
        int sz, j;
        if( iPrev<0 ) return "'{m,n}' without operand";
        while( (c=rePeek(p))>='0' && c<='9' ){ m = m*10 + c - '0'; p->sIn.i++; }
        n = m;
        if( c==',' ){
          p->sIn.i++;
          n = 0;
          while( (c=rePeek(p))>='0' && c<='9' ){ n = n*10 + c-'0'; p->sIn.i++; }
        }
        if( c!='}' ) return "unmatched '{'";
        if( n>0 && n<m ) return "n less than m in '{m,n}'";
        p->sIn.i++;
        sz = p->nState - iPrev;
        if( m==0 ){
          if( n==0 ) return "both m and n are zero in '{m,n}'";
          re_insert(p, iPrev, RE_OP_FORK, sz+1);
          iPrev++;
          n--;
        }else{
          for(j=1; j<m; j++) re_copy(p, iPrev, sz);
        }
        for(j=m; j<n; j++){
          re_append(p, RE_OP_FORK, sz+1);
          re_copy(p, iPrev, sz);

  pRe->sIn.i = 0;
  pRe->sIn.mx = (int)strlen(zIn);
  zErr = re_subcompile_re(pRe);
  if( zErr ){
    re_free(pRe);
    return zErr;
  }




  if( pRe->sIn.i>=pRe->sIn.mx ){
    re_append(pRe, RE_OP_ACCEPT, 0);
    *ppRe = pRe;
  }else{
    re_free(pRe);
    return "unrecognized character";
  }

  if( zStr!=0 ){
    sqlite3_result_int(context, re_match(pRe, zStr, -1));
  }
  if( setAux ){
    sqlite3_set_auxdata(context, 0, pRe, (void(*)(void*))re_free);
  }
}

#if defined(SQLITE_DEBUG)
/*
** This function is used for testing and debugging only.  It is only available
** if the SQLITE_DEBUG compile-time option is used.
**
** Compile a regular expression and then convert the compiled expression into
** text and return that text.
*/
static void re_bytecode_func(
  sqlite3_context *context,
  int argc,
  sqlite3_value **argv
){
  const char *zPattern;
  const char *zErr;
  ReCompiled *pRe;
  sqlite3_str *pStr;
  int i;
  int n;
  char *z;

  zPattern = (const char*)sqlite3_value_text(argv[0]);
  if( zPattern==0 ) return;
  zErr = re_compile(&pRe, zPattern, sqlite3_user_data(context)!=0);
  if( zErr ){
    re_free(pRe);
    sqlite3_result_error(context, zErr, -1);
    return;
  }
  if( pRe==0 ){
    sqlite3_result_error_nomem(context);
    return;
  }
  pStr = sqlite3_str_new(0);
  if( pStr==0 ) goto re_bytecode_func_err;
  if( pRe->nInit>0 ){
    sqlite3_str_appendf(pStr, "INIT     ");
    for(i=0; i<pRe->nInit; i++){
      sqlite3_str_appendf(pStr, "%02x", pRe->zInit[i]);
    }
    sqlite3_str_appendf(pStr, "\n");
  }
  for(i=0; (unsigned)i<pRe->nState; i++){
    sqlite3_str_appendf(pStr, "%-8s %4d\n",
         ReOpName[(unsigned char)pRe->aOp[i]], pRe->aArg[i]);
  }
  n = sqlite3_str_length(pStr);
  z = sqlite3_str_finish(pStr);
  if( n==0 ){
    sqlite3_free(z);
  }else{
    sqlite3_result_text(context, z, n-1, sqlite3_free);
  }

re_bytecode_func_err:
  re_free(pRe);
}

#endif /* SQLITE_DEBUG */


/*
** Invoke this routine to register the regexp() function with the
** SQLite database connection.
*/
#ifdef _WIN32

                            0, re_sql_func, 0, 0);
  if( rc==SQLITE_OK ){
    /* The regexpi(PATTERN,STRING) function is a case-insensitive version
    ** of regexp(PATTERN,STRING). */
    rc = sqlite3_create_function(db, "regexpi", 2,
                            SQLITE_UTF8|SQLITE_INNOCUOUS|SQLITE_DETERMINISTIC,
                            (void*)db, re_sql_func, 0, 0);
#if defined(SQLITE_DEBUG)
    if( rc==SQLITE_OK ){
      rc = sqlite3_create_function(db, "regexp_bytecode", 1,
                            SQLITE_UTF8|SQLITE_INNOCUOUS|SQLITE_DETERMINISTIC,
                            0, re_bytecode_func, 0, 0);
    }
#endif /* SQLITE_DEBUG */
  }
  return rc;
}

/************************* End ../ext/misc/regexp.c ********************/
#ifndef SQLITE_SHELL_FIDDLE
/************************* Begin ../ext/misc/fileio.c ******************/
/*
** 2014-06-13
**
** The author disclaims copyright to this source code.  In place of
** a legal notice, here is a blessing:
**

/*
** Return true if zId must be quoted in order to use it as an SQL
** identifier, or false otherwise.
*/
static int idxIdentifierRequiresQuotes(const char *zId){
  int i;
  int nId = STRLEN(zId);
  
  if( sqlite3_keyword_check(zId, nId) ) return 1;

  for(i=0; zId[i]; i++){
    if( !(zId[i]=='_')
     && !(zId[i]>='0' && zId[i]<='9')
     && !(zId[i]>='a' && zId[i]<='z')
     && !(zId[i]>='A' && zId[i]<='Z')
    ){
      return 1;

    *pAuxDb;             /* Currently active database connection */
  int *aiIndent;         /* Array of indents used in MODE_Explain */
  int nIndent;           /* Size of array aiIndent[] */
  int iIndent;           /* Index of current op in aiIndent[] */
  char *zNonce;          /* Nonce for temporary safe-mode excapes */
  EQPGraph sGraph;       /* Information for the graphical EXPLAIN QUERY PLAN */
  ExpertInfo expert;     /* Valid if previous command was ".expert OPT..." */
#ifdef SQLITE_SHELL_FIDDLE
  struct {
    const char * zInput; /* Input string from wasm/JS proxy */
    const char * zPos;   /* Cursor pos into zInput */
    const char * zDefaultDbName; /* Default name for db file */
  } wasm;
#endif
};

#ifdef SQLITE_SHELL_FIDDLE
static ShellState shellState;
#endif


/* Allowed values for ShellState.autoEQP
*/
#define AUTOEQP_off      0           /* Automatic EXPLAIN QUERY PLAN is off */

}

/*
** Output the given string as a hex-encoded blob (eg. X'1234' )
*/
static void output_hex_blob(FILE *out, const void *pBlob, int nBlob){
  int i;
  unsigned char *aBlob = (unsigned char*)pBlob;

  char *zStr = sqlite3_malloc(nBlob*2 + 1);
  shell_check_oom(zStr);

  for(i=0; i<nBlob; i++){
    static const char aHex[] = {
        '0', '1', '2', '3', '4', '5', '6', '7',
        '8', '9', 'a', 'b', 'c', 'd', 'e', 'f'
    };
    zStr[i*2] = aHex[ (aBlob[i] >> 4) ];
    zStr[i*2+1] = aHex[ (aBlob[i] & 0x0F) ];
  }
  zStr[i*2] = '\0';

  raw_printf(out,"X'%s'", zStr);
  sqlite3_free(zStr);
}

/*
** Find a string that is not found anywhere in z[].  Return a pointer
** to that string.
**
** Try to use zA and zB first.  If both of those are already found in z[]

  }
  fputc('"', out);
}

/*
** Output the given string as a quoted according to JSON quoting rules.
*/
static void output_json_string(FILE *out, const char *z, i64 n){
  unsigned int c;
  if( n<0 ) n = strlen(z);
  fputc('"', out);
  while( n-- ){
    c = *(z++);
    if( c=='\\' || c=='"' ){
      fputc('\\', out);
      fputc(c, out);
    }else if( c<=0x1f ){

    "zipfile_cds",
  };
  UNUSED_PARAMETER(zA2);
  UNUSED_PARAMETER(zA3);
  UNUSED_PARAMETER(zA4);
  switch( op ){
    case SQLITE_ATTACH: {
#ifndef SQLITE_SHELL_FIDDLE
      /* In WASM builds the filesystem is a virtual sandbox, so
      ** there's no harm in using ATTACH. */
      failIfSafeMode(p, "cannot run ATTACH in safe mode");
#endif
      break;
    }
    case SQLITE_FUNCTION: {

#endif

/*
** Print a schema statement.  Part of MODE_Semi and MODE_Pretty output.
**
** This routine converts some CREATE TABLE statements for shadow tables
** in FTS3/4/5 into CREATE TABLE IF NOT EXISTS statements.
**
** If the schema statement in z[] contains a start-of-comment and if
** sqlite3_complete() returns false, try to terminate the comment before
** printing the result.  https://sqlite.org/forum/forumpost/d7be961c5c
*/
static void printSchemaLine(FILE *out, const char *z, const char *zTail){
  char *zToFree = 0;
  if( z==0 ) return;
  if( zTail==0 ) return;
  if( zTail[0]==';' && (strstr(z, "/*")!=0 || strstr(z,"--")!=0) ){
    const char *zOrig = z;
    static const char *azTerm[] = { "", "*/", "\n" };
    int i;
    for(i=0; i<ArraySize(azTerm); i++){
      char *zNew = sqlite3_mprintf("%s%s;", zOrig, azTerm[i]);
      if( sqlite3_complete(zNew) ){
        size_t n = strlen(zNew);
        zNew[n-1] = 0;
        zToFree = zNew;
        z = zNew;
        break;
      }
      sqlite3_free(zNew);
    }
  }
  if( sqlite3_strglob("CREATE TABLE ['\"]*", z)==0 ){
    utf8_printf(out, "CREATE TABLE IF NOT EXISTS %s%s", z+13, zTail);
  }else{
    utf8_printf(out, "%s%s", z, zTail);
  }
  sqlite3_free(zToFree);
}
static void printSchemaLineN(FILE *out, char *z, int n, const char *zTail){
  char c = z[n];
  z[n] = 0;
  printSchemaLine(out, z, zTail);
  z[n] = c;
}

}

/*
** Add a new entry to the EXPLAIN QUERY PLAN data
*/
static void eqp_append(ShellState *p, int iEqpId, int p2, const char *zText){
  EQPGraphRow *pNew;
  i64 nText;
  if( zText==0 ) return;
  nText = strlen(zText);
  if( p->autoEQPtest ){
    utf8_printf(p->out, "%d,%d,%s\n", iEqpId, p2, zText);
  }
  pNew = sqlite3_malloc64( sizeof(*pNew) + nText );
  shell_check_oom(pNew);
  pNew->iEqpId = iEqpId;
  pNew->iParentId = p2;

}

/* Render a single level of the graph that has iEqpId as its parent.  Called
** recursively to render sublevels.
*/
static void eqp_render_level(ShellState *p, int iEqpId){
  EQPGraphRow *pRow, *pNext;
  i64 n = strlen(p->sGraph.zPrefix);
  char *z;
  for(pRow = eqp_next_row(p, iEqpId, 0); pRow; pRow = pNext){
    pNext = eqp_next_row(p, iEqpId, pRow);
    z = pRow->zText;
    utf8_printf(p->out, "%s%s%s\n", p->sGraph.zPrefix,
                pNext ? "|--" : "`--", z);
    if( n<(i64)sizeof(p->sGraph.zPrefix)-7 ){
      memcpy(&p->sGraph.zPrefix[n], pNext ? "|  " : "   ", 4);
      eqp_render_level(p, pRow->iEqpId);
      p->sGraph.zPrefix[n] = 0;
    }
  }
}

      { "read_bytes: ",             "Bytes read from storage:"  },
      { "write_bytes: ",            "Bytes written to storage:" },
      { "cancelled_write_bytes: ",  "Cancelled write bytes:"    },
    };
    int i;
    for(i=0; i<ArraySize(aTrans); i++){
      int n = strlen30(aTrans[i].zPattern);
      if( cli_strncmp(aTrans[i].zPattern, z, n)==0 ){
        utf8_printf(out, "%-36s %s", aTrans[i].zDesc, &z[n]);
        break;
      }
    }
  }
  fclose(in);
}

** points to a single nul-terminated string. Return non-zero if zStr
** is equal, according to strcmp(), to any of the strings in the array.
** Otherwise, return zero.
*/
static int str_in_array(const char *zStr, const char **azArray){
  int i;
  for(i=0; azArray[i]; i++){
    if( 0==cli_strcmp(zStr, azArray[i]) ) return 1;
  }
  return 0;
}

/*
** If compiled statement pSql appears to be an EXPLAIN statement, allocate
** and populate the ShellState.aiIndent[] array with the number of

      if( iOp==0 ){
        /* Do further verfication that this is explain output.  Abort if
        ** it is not */
        static const char *explainCols[] = {
           "addr", "opcode", "p1", "p2", "p3", "p4", "p5", "comment" };
        int jj;
        for(jj=0; jj<ArraySize(explainCols); jj++){
          if( cli_strcmp(sqlite3_column_name(pSql,jj),explainCols[jj])!=0 ){
            p->cMode = p->mode;
            sqlite3_reset(pSql);
            return;
          }
        }
      }
      nAlloc += 100;

  memset(&pState->expert, 0, sizeof(ExpertInfo));

  for(i=1; rc==SQLITE_OK && i<nArg; i++){
    char *z = azArg[i];
    int n;
    if( z[0]=='-' && z[1]=='-' ) z++;
    n = strlen30(z);
    if( n>=2 && 0==cli_strncmp(z, "-verbose", n) ){
      pState->expert.bVerbose = 1;
    }
    else if( n>=2 && 0==cli_strncmp(z, "-sample", n) ){
      if( i==(nArg-1) ){
        raw_printf(stderr, "option requires an argument: %s\n", z);
        rc = SQLITE_ERROR;
      }else{
        iSample = (int)integerValue(azArg[++i]);
        if( iSample<0 || iSample>100 ){
          raw_printf(stderr, "value out of range: %s\n", azArg[i]);

  int noSys;

  UNUSED_PARAMETER(azNotUsed);
  if( nArg!=3 || azArg==0 ) return 0;
  zTable = azArg[0];
  zType = azArg[1];
  zSql = azArg[2];
  if( zTable==0 ) return 0;
  if( zType==0 ) return 0;
  dataOnly = (p->shellFlgs & SHFLG_DumpDataOnly)!=0;
  noSys    = (p->shellFlgs & SHFLG_DumpNoSys)!=0;

  if( cli_strcmp(zTable, "sqlite_sequence")==0 && !noSys ){
    if( !dataOnly ) raw_printf(p->out, "DELETE FROM sqlite_sequence;\n");
  }else if( sqlite3_strglob("sqlite_stat?", zTable)==0 && !noSys ){
    if( !dataOnly ) raw_printf(p->out, "ANALYZE sqlite_schema;\n");
  }else if( cli_strncmp(zTable, "sqlite_", 7)==0 ){
    return 0;
  }else if( dataOnly ){
    /* no-op */
  }else if( cli_strncmp(zSql, "CREATE VIRTUAL TABLE", 20)==0 ){
    char *zIns;
    if( !p->writableSchema ){
      raw_printf(p->out, "PRAGMA writable_schema=ON;\n");
      p->writableSchema = 1;
    }
    zIns = sqlite3_mprintf(
       "INSERT INTO sqlite_schema(type,name,tbl_name,rootpage,sql)"
       "VALUES('table','%q','%q',0,'%q');",
       zTable, zTable, zSql);
    shell_check_oom(zIns);
    utf8_printf(p->out, "%s\n", zIns);
    sqlite3_free(zIns);
    return 0;
  }else{
    printSchemaLine(p->out, zSql, ";\n");
  }

  if( cli_strcmp(zType, "table")==0 ){
    ShellText sSelect;
    ShellText sTable;
    char **azCol;
    int i;
    char *savedDestTable;
    int savedMode;

** with ".".  Subsequent lines are supplemental information.
**
** There must be two or more spaces between the end of the command and the
** start of the description of what that command does.
*/
static const char *(azHelp[]) = {
#if defined(SQLITE_HAVE_ZLIB) && !defined(SQLITE_OMIT_VIRTUALTABLE) \
  && !defined(SQLITE_SHELL_FIDDLE)
  ".archive ...             Manage SQL archives",
  "   Each command must have exactly one of the following options:",
  "     -c, --create               Create a new archive",
  "     -u, --update               Add or update files with changed mtime",
  "     -i, --insert               Like -u but always add even if unchanged",
  "     -r, --remove               Remove files from archive",
  "     -t, --list                 List contents of archive",

  "     .ar -xvf ARCHIVE         # Verbosely extract files from ARCHIVE",
  "   See also:",
  "      http://sqlite.org/cli.html#sqlite_archive_support",
#endif
#ifndef SQLITE_OMIT_AUTHORIZATION
  ".auth ON|OFF             Show authorizer callbacks",
#endif
#ifndef SQLITE_SHELL_FIDDLE
  ".backup ?DB? FILE        Backup DB (default \"main\") to FILE",
  "   Options:",
  "       --append            Use the appendvfs",
  "       --async             Write to FILE without journal and fsync()",
#endif
  ".bail on|off             Stop after hitting an error.  Default OFF",
  ".binary on|off           Turn binary output on or off.  Default OFF",
#ifndef SQLITE_SHELL_FIDDLE
  ".cd DIRECTORY            Change the working directory to DIRECTORY",
#endif
  ".changes on|off          Show number of rows changed by SQL",
#ifndef SQLITE_SHELL_FIDDLE
  ".check GLOB              Fail if output since .testcase does not match",
  ".clone NEWDB             Clone data into NEWDB from the existing database",
#endif
  ".connection [close] [#]  Open or close an auxiliary database connection",
  ".databases               List names and files of attached databases",
  ".dbconfig ?op? ?val?     List or change sqlite3_db_config() options",
#if !defined(SQLITE_OMIT_VIRTUALTABLE) && defined(SQLITE_ENABLE_DBPAGE_VTAB)

  ".eqp on|off|full|...     Enable or disable automatic EXPLAIN QUERY PLAN",
  "   Other Modes:",
#ifdef SQLITE_DEBUG
  "      test                  Show raw EXPLAIN QUERY PLAN output",
  "      trace                 Like \"full\" but enable \"PRAGMA vdbe_trace\"",
#endif
  "      trigger               Like \"full\" but also show trigger bytecode",
#ifndef SQLITE_SHELL_FIDDLE
  ".excel                   Display the output of next command in spreadsheet",
  "   --bom                   Put a UTF8 byte-order mark on intermediate file",
#endif
#ifndef SQLITE_SHELL_FIDDLE
  ".exit ?CODE?             Exit this program with return-code CODE",
#endif
  ".expert                  EXPERIMENTAL. Suggest indexes for queries",
  ".explain ?on|off|auto?   Change the EXPLAIN formatting mode.  Default: auto",
  ".filectrl CMD ...        Run various sqlite3_file_control() operations",
  "   --schema SCHEMA         Use SCHEMA instead of \"main\"",
  "   --help                  Show CMD details",
  ".fullschema ?--indent?   Show schema and the content of sqlite_stat tables",
  ".headers on|off          Turn display of headers on or off",
  ".help ?-all? ?PATTERN?   Show help text for PATTERN",
#ifndef SQLITE_SHELL_FIDDLE
  ".import FILE TABLE       Import data from FILE into TABLE",
  "   Options:",
  "     --ascii               Use \\037 and \\036 as column and row separators",
  "     --csv                 Use , and \\n as column and row separators",
  "     --skip N              Skip the first N rows of input",
  "     --schema S            Target table to be S.TABLE",
  "     -v                    \"Verbose\" - increase auxiliary output",

#ifdef SQLITE_ENABLE_IOTRACE
  ".iotrace FILE            Enable I/O diagnostic logging to FILE",
#endif
  ".limit ?LIMIT? ?VAL?     Display or change the value of an SQLITE_LIMIT",
  ".lint OPTIONS            Report potential schema issues.",
  "     Options:",
  "        fkey-indexes     Find missing foreign key indexes",
#if !defined(SQLITE_OMIT_LOAD_EXTENSION) && !defined(SQLITE_SHELL_FIDDLE)
  ".load FILE ?ENTRY?       Load an extension library",
#endif
#ifndef SQLITE_SHELL_FIDDLE
  ".log FILE|off            Turn logging on or off.  FILE can be stderr/stdout",
#endif
  ".mode MODE ?OPTIONS?     Set output mode",
  "   MODE is one of:",
  "     ascii       Columns/rows delimited by 0x1F and 0x1E",
  "     box         Tables using unicode box-drawing characters",
  "     csv         Comma-separated values",
  "     column      Output in columns.  (See .width)",
  "     html        HTML <table> code",
  "     insert      SQL insert statements for TABLE",
  "     json        Results in a JSON array",
  "     line        One value per line",
  "     list        Values delimited by \"|\"",
  "     markdown    Markdown table format",
  "     qbox        Shorthand for \"box --wrap 60 --quote\"",
  "     quote       Escape answers as for SQL",
  "     table       ASCII-art table",
  "     tabs        Tab-separated values",
  "     tcl         TCL list elements",
  "   OPTIONS: (for columnar modes or insert mode):",
  "     --wrap N       Wrap output lines to no longer than N characters",
  "     --wordwrap B   Wrap or not at word boundaries per B (on/off)",
  "     --ww           Shorthand for \"--wordwrap 1\"",
  "     --quote        Quote output text as SQL literals",
  "     --noquote      Do not quote output text",
  "     TABLE          The name of SQL table used for \"insert\" mode",
#ifndef SQLITE_SHELL_FIDDLE
  ".nonce STRING            Suspend safe mode for one command if nonce matches",
#endif
  ".nullvalue STRING        Use STRING in place of NULL values",
#ifndef SQLITE_SHELL_FIDDLE
  ".once ?OPTIONS? ?FILE?   Output for the next SQL command only to FILE",
  "     If FILE begins with '|' then open as a pipe",
  "       --bom  Put a UTF8 byte-order mark at the beginning",
  "       -e     Send output to the system text editor",
  "       -x     Send output as CSV to a spreadsheet (same as \".excel\")",
  /* Note that .open is (partially) available in WASM builds but is
  ** currently only intended to be used by the fiddle tool, not

  "        --hexdb         Load the output of \"dbtotxt\" as an in-memory db",
  "        --maxsize N     Maximum size for --hexdb or --deserialized database",
#endif
  "        --new           Initialize FILE to an empty database",
  "        --nofollow      Do not follow symbolic links",
  "        --readonly      Open FILE readonly",
  "        --zip           FILE is a ZIP archive",
#ifndef SQLITE_SHELL_FIDDLE
  ".output ?FILE?           Send output to FILE or stdout if FILE is omitted",
  "   If FILE begins with '|' then open it as a pipe.",
  "   Options:",
  "     --bom                 Prefix output with a UTF8 byte-order mark",
  "     -e                    Send output to the system text editor",
  "     -x                    Send output as CSV to a spreadsheet",
#endif

  ".progress N              Invoke progress handler after every N opcodes",
  "   --limit N                 Interrupt after N progress callbacks",
  "   --once                    Do no more than one progress interrupt",
  "   --quiet|-q                No output except at interrupts",
  "   --reset                   Reset the count for each input and interrupt",
#endif
  ".prompt MAIN CONTINUE    Replace the standard prompts",
#ifndef SQLITE_SHELL_FIDDLE
  ".quit                    Exit this program",
  ".read FILE               Read input from FILE or command output",
  "    If FILE begins with \"|\", it is a command that generates the input.",
#endif
#if !defined(SQLITE_OMIT_VIRTUALTABLE) && defined(SQLITE_ENABLE_DBPAGE_VTAB)
  ".recover                 Recover as much data as possible from corrupt db.",
  "   --freelist-corrupt       Assume the freelist is corrupt",
  "   --recovery-db NAME       Store recovery metadata in database file NAME",
  "   --lost-and-found TABLE   Alternative name for the lost-and-found table",
  "   --no-rowids              Do not attempt to recover rowid values",
  "                            that are not also INTEGER PRIMARY KEYs",
#endif
#ifndef SQLITE_SHELL_FIDDLE
  ".restore ?DB? FILE       Restore content of DB (default \"main\") from FILE",
  ".save ?OPTIONS? FILE     Write database to FILE (an alias for .backup ...)",
#endif
  ".scanstats on|off        Turn sqlite3_stmt_scanstatus() metrics on or off",
  ".schema ?PATTERN?        Show the CREATE statements matching PATTERN",
  "   Options:",
  "      --indent             Try to pretty-print the schema",

  "    Options:",
  "      --schema              Also hash the sqlite_schema table",
  "      --sha3-224            Use the sha3-224 algorithm",
  "      --sha3-256            Use the sha3-256 algorithm (default)",
  "      --sha3-384            Use the sha3-384 algorithm",
  "      --sha3-512            Use the sha3-512 algorithm",
  "    Any other argument is a LIKE pattern for tables to hash",
#if !defined(SQLITE_NOHAVE_SYSTEM) && !defined(SQLITE_SHELL_FIDDLE)
  ".shell CMD ARGS...       Run CMD ARGS... in a system shell",
#endif
  ".show                    Show the current values for various settings",
  ".stats ?ARG?             Show stats or turn stats on or off",
  "   off                      Turn off automatic stat display",
  "   on                       Turn on automatic stat display",
  "   stmt                     Show statement stats",
  "   vmstep                   Show the virtual machine step count only",
#if !defined(SQLITE_NOHAVE_SYSTEM) && !defined(SQLITE_SHELL_FIDDLE)
  ".system CMD ARGS...      Run CMD ARGS... in a system shell",
#endif
  ".tables ?TABLE?          List names of tables matching LIKE pattern TABLE",
#ifndef SQLITE_SHELL_FIDDLE
  ".testcase NAME           Begin redirecting output to 'testcase-out.txt'",
#endif
  ".testctrl CMD ...        Run various sqlite3_test_control() operations",
  "                           Run \".testctrl\" with no arguments for details",
  ".timeout MS              Try opening locked tables for MS milliseconds",
  ".timer on|off            Turn SQL timer on or off",
#ifndef SQLITE_OMIT_TRACE

static int showHelp(FILE *out, const char *zPattern){
  int i = 0;
  int j = 0;
  int n = 0;
  char *zPat;
  if( zPattern==0
   || zPattern[0]=='0'
   || cli_strcmp(zPattern,"-a")==0
   || cli_strcmp(zPattern,"-all")==0
   || cli_strcmp(zPattern,"--all")==0
  ){
    /* Show all commands, but only one line per command */
    if( zPattern==0 ) zPattern = "";
    for(i=0; i<ArraySize(azHelp); i++){
      if( azHelp[i][0]=='.' || zPattern[0] ){
        utf8_printf(out, "%s\n", azHelp[i]);
        n++;

  }
  for(nLine++; fgets(zLine, sizeof(zLine), in)!=0; nLine++){
    rc = sscanf(zLine, "| page %d offset %d", &j, &k);
    if( rc==2 ){
      iOffset = k;
      continue;
    }
    if( cli_strncmp(zLine, "| end ", 6)==0 ){
      break;
    }
    rc = sscanf(zLine,"| %d: %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x",
                &j, &x[0], &x[1], &x[2], &x[3], &x[4], &x[5], &x[6], &x[7],
                &x[8], &x[9], &x[10], &x[11], &x[12], &x[13], &x[14], &x[15]);
    if( rc==17 ){
      k = iOffset+j;

readHexDb_error:
  if( in!=p->in ){
    fclose(in);
  }else{
    while( fgets(zLine, sizeof(zLine), p->in)!=0 ){
      nLine++;
      if(cli_strncmp(zLine, "| end ", 6)==0 ) break;
    }
    p->lineno = nLine;
  }
  sqlite3_free(a);
  utf8_printf(stderr,"Error on line %d of --hexdb input\n", nLine);
  return 0;
}

  sqlite3_context *context, 
  int argc, 
  sqlite3_value **argv
){
  const char *zText = (const char*)sqlite3_value_text(argv[0]);
  UNUSED_PARAMETER(argc);
  if( zText && zText[0]=='\'' ){
    i64 nText = sqlite3_value_bytes(argv[0]);
    i64 i;
    char zBuf1[20];
    char zBuf2[20];
    const char *zNL = 0;
    const char *zCR = 0;
    i64 nCR = 0;
    i64 nNL = 0;

    for(i=0; zText[i]; i++){
      if( zNL==0 && zText[i]=='\n' ){
        zNL = unused_string(zText, "\\n", "\\012", zBuf1);
        nNL = strlen(zNL);
      }
      if( zCR==0 && zText[i]=='\r' ){
        zCR = unused_string(zText, "\\r", "\\015", zBuf2);
        nCR = strlen(zCR);
      }
    }

    if( zNL || zCR ){
      i64 iOut = 0;
      i64 nMax = (nNL > nCR) ? nNL : nCR;
      i64 nAlloc = nMax * nText + (nMax+64)*2;
      char *zOut = (char*)sqlite3_malloc64(nAlloc);
      if( zOut==0 ){
        sqlite3_result_error_nomem(context);
        return;
      }

#endif
    sqlite3_shathree_init(p->db, 0, 0);
    sqlite3_uint_init(p->db, 0, 0);
    sqlite3_decimal_init(p->db, 0, 0);
    sqlite3_regexp_init(p->db, 0, 0);
    sqlite3_ieee_init(p->db, 0, 0);
    sqlite3_series_init(p->db, 0, 0);
#ifndef SQLITE_SHELL_FIDDLE
    sqlite3_fileio_init(p->db, 0, 0);
    sqlite3_completion_init(p->db, 0, 0);
#endif
#if !defined(SQLITE_OMIT_VIRTUALTABLE) && defined(SQLITE_ENABLE_DBPAGE_VTAB)
    sqlite3_dbdata_init(p->db, 0, 0);
#endif
#ifdef SQLITE_HAVE_ZLIB

}

#elif HAVE_LINENOISE
/*
** Linenoise completion callback
*/
static void linenoise_completion(const char *zLine, linenoiseCompletions *lc){
  i64 nLine = strlen(zLine);
  i64 i, iStart;
  sqlite3_stmt *pStmt = 0;
  char *zSql;
  char zBuf[1000];

  if( nLine>sizeof(zBuf)-30 ) return;
  if( zLine[0]=='.' || zLine[0]=='#') return;
  for(i=nLine-1; i>=0 && (isalnum(zLine[i]) || zLine[i]=='_'); i--){}

/*
** Try to open an output file.   The names "stdout" and "stderr" are
** recognized and do the right thing.  NULL is returned if the output
** filename is "off".
*/
static FILE *output_file_open(const char *zFile, int bTextMode){
  FILE *f;
  if( cli_strcmp(zFile,"stdout")==0 ){
    f = stdout;
  }else if( cli_strcmp(zFile, "stderr")==0 ){
    f = stderr;
  }else if( cli_strcmp(zFile, "off")==0 ){
    f = 0;
  }else{
    f = fopen(zFile, bTextMode ? "w" : "wb");
    if( f==0 ){
      utf8_printf(stderr, "Error: cannot open \"%s\"\n", zFile);
    }
  }

  void *pArg,             /* The ShellState pointer */
  void *pP,               /* Usually a pointer to sqlite_stmt */
  void *pX                /* Auxiliary output */
){
  ShellState *p = (ShellState*)pArg;
  sqlite3_stmt *pStmt;
  const char *zSql;
  i64 nSql;
  if( p->traceOut==0 ) return 0;
  if( mType==SQLITE_TRACE_CLOSE ){
    utf8_printf(p->traceOut, "-- closing database connection\n");
    return 0;
  }
  if( mType!=SQLITE_TRACE_ROW && ((const char*)pX)[0]=='-' ){
    zSql = (const char*)pX;

      default: {
        zSql = sqlite3_sql(pStmt);
        break;
      }
    }
  }
  if( zSql==0 ) return 0;
  nSql = strlen(zSql);
  if( nSql>1000000000 ) nSql = 1000000000;
  while( nSql>0 && zSql[nSql-1]==';' ){ nSql--; }
  switch( mType ){
    case SQLITE_TRACE_ROW:
    case SQLITE_TRACE_STMT: {
      utf8_printf(p->traceOut, "%.*s;\n", (int)nSql, zSql);
      break;
    }
    case SQLITE_TRACE_PROFILE: {
      sqlite3_int64 nNanosec = *(sqlite3_int64*)pX;
      utf8_printf(p->traceOut, "%.*s; -- %lld ns\n", (int)nSql, zSql, nNanosec);
      break;
    }
  }
  return 0;
}
#endif

        if( val==3 ) raw_printf(p->out, " (utf16be)");
      }
    }
    raw_printf(p->out, "\n");
  }
  if( zDb==0 ){
    zSchemaTab = sqlite3_mprintf("main.sqlite_schema");
  }else if( cli_strcmp(zDb,"temp")==0 ){
    zSchemaTab = sqlite3_mprintf("%s", "sqlite_temp_schema");
  }else{
    zSchemaTab = sqlite3_mprintf("\"%w\".sqlite_schema", zDb);
  }
  for(i=0; i<ArraySize(aQuery); i++){
    char *zSql = sqlite3_mprintf(aQuery[i].zSql, zSchemaTab);
    int val = db_int(p->db, zSql);

** Compare the string as a command-line option with either one or two
** initial "-" characters.
*/
static int optionMatch(const char *zStr, const char *zOpt){
  if( zStr[0]!='-' ) return 0;
  zStr++;
  if( zStr[0]=='-' ) zStr++;
  return cli_strcmp(zStr, zOpt)==0;
}

/*
** Delete a file.
*/
int shellDeleteFile(const char *zFilename){
  int rc;

  */
  if( nArg==0 ) return 0; /* no tokens, no error */
  n = strlen30(azArg[0]);
  c = azArg[0][0];
  clearTempFile(p);

#ifndef SQLITE_OMIT_AUTHORIZATION
  if( c=='a' && cli_strncmp(azArg[0], "auth", n)==0 ){
    if( nArg!=2 ){
      raw_printf(stderr, "Usage: .auth ON|OFF\n");
      rc = 1;
      goto meta_command_exit;
    }
    open_db(p, 0);
    if( booleanValue(azArg[1]) ){
      sqlite3_set_authorizer(p->db, shellAuth, p);
    }else if( p->bSafeModePersist ){
      sqlite3_set_authorizer(p->db, safeModeAuth, p);
    }else{
      sqlite3_set_authorizer(p->db, 0, 0);
    }
  }else
#endif

#if !defined(SQLITE_OMIT_VIRTUALTABLE) && defined(SQLITE_HAVE_ZLIB) \
  && !defined(SQLITE_SHELL_FIDDLE)
  if( c=='a' && cli_strncmp(azArg[0], "archive", n)==0 ){
    open_db(p, 0);
    failIfSafeMode(p, "cannot run .archive in safe mode");
    rc = arDotCommand(p, 0, azArg, nArg);
  }else
#endif

#ifndef SQLITE_SHELL_FIDDLE
  if( (c=='b' && n>=3 && cli_strncmp(azArg[0], "backup", n)==0)
   || (c=='s' && n>=3 && cli_strncmp(azArg[0], "save", n)==0)
  ){
    const char *zDestFile = 0;
    const char *zDb = 0;
    sqlite3 *pDest;
    sqlite3_backup *pBackup;
    int j;
    int bAsync = 0;
    const char *zVfs = 0;
    failIfSafeMode(p, "cannot run .%s in safe mode", azArg[0]);
    for(j=1; j<nArg; j++){
      const char *z = azArg[j];
      if( z[0]=='-' ){
        if( z[1]=='-' ) z++;
        if( cli_strcmp(z, "-append")==0 ){
          zVfs = "apndvfs";
        }else
        if( cli_strcmp(z, "-async")==0 ){
          bAsync = 1;
        }else
        {
          utf8_printf(stderr, "unknown option: %s\n", azArg[j]);
          return 1;
        }
      }else if( zDestFile==0 ){

      rc = 0;
    }else{
      utf8_printf(stderr, "Error: %s\n", sqlite3_errmsg(pDest));
      rc = 1;
    }
    close_db(pDest);
  }else
#endif /* !defined(SQLITE_SHELL_FIDDLE) */

  if( c=='b' && n>=3 && cli_strncmp(azArg[0], "bail", n)==0 ){
    if( nArg==2 ){
      bail_on_error = booleanValue(azArg[1]);
    }else{
      raw_printf(stderr, "Usage: .bail on|off\n");
      rc = 1;
    }
  }else

  if( c=='b' && n>=3 && cli_strncmp(azArg[0], "binary", n)==0 ){
    if( nArg==2 ){
      if( booleanValue(azArg[1]) ){
        setBinaryMode(p->out, 1);
      }else{
        setTextMode(p->out, 1);
      }
    }else{
      raw_printf(stderr, "Usage: .binary on|off\n");
      rc = 1;
    }
  }else

  /* The undocumented ".breakpoint" command causes a call to the no-op
  ** routine named test_breakpoint().
  */
  if( c=='b' && n>=3 && cli_strncmp(azArg[0], "breakpoint", n)==0 ){
    test_breakpoint();
  }else

#ifndef SQLITE_SHELL_FIDDLE
  if( c=='c' && cli_strcmp(azArg[0],"cd")==0 ){
    failIfSafeMode(p, "cannot run .cd in safe mode");
    if( nArg==2 ){
#if defined(_WIN32) || defined(WIN32)
      wchar_t *z = sqlite3_win32_utf8_to_unicode(azArg[1]);
      rc = !SetCurrentDirectoryW(z);
      sqlite3_free(z);
#else
      rc = chdir(azArg[1]);
#endif
      if( rc ){
        utf8_printf(stderr, "Cannot change to directory \"%s\"\n", azArg[1]);
        rc = 1;
      }
    }else{
      raw_printf(stderr, "Usage: .cd DIRECTORY\n");
      rc = 1;
    }
  }else
#endif /* !defined(SQLITE_SHELL_FIDDLE) */

  if( c=='c' && n>=3 && cli_strncmp(azArg[0], "changes", n)==0 ){
    if( nArg==2 ){
      setOrClearFlag(p, SHFLG_CountChanges, azArg[1]);
    }else{
      raw_printf(stderr, "Usage: .changes on|off\n");
      rc = 1;
    }
  }else

#ifndef SQLITE_SHELL_FIDDLE
  /* Cancel output redirection, if it is currently set (by .testcase)
  ** Then read the content of the testcase-out.txt file and compare against
  ** azArg[1].  If there are differences, report an error and exit.
  */
  if( c=='c' && n>=3 && cli_strncmp(azArg[0], "check", n)==0 ){
    char *zRes = 0;
    output_reset(p);
    if( nArg!=2 ){
      raw_printf(stderr, "Usage: .check GLOB-PATTERN\n");
      rc = 2;
    }else if( (zRes = readFile("testcase-out.txt", 0))==0 ){
      raw_printf(stderr, "Error: cannot read 'testcase-out.txt'\n");
      rc = 2;
    }else if( testcase_glob(azArg[1],zRes)==0 ){
      utf8_printf(stderr,
                 "testcase-%s FAILED\n Expected: [%s]\n      Got: [%s]\n",
                 p->zTestcase, azArg[1], zRes);
      rc = 1;
    }else{
      utf8_printf(stdout, "testcase-%s ok\n", p->zTestcase);
      p->nCheck++;
    }
    sqlite3_free(zRes);
  }else
#endif /* !defined(SQLITE_SHELL_FIDDLE) */

#ifndef SQLITE_SHELL_FIDDLE
  if( c=='c' && cli_strncmp(azArg[0], "clone", n)==0 ){
    failIfSafeMode(p, "cannot run .clone in safe mode");
    if( nArg==2 ){
      tryToClone(p, azArg[1]);
    }else{
      raw_printf(stderr, "Usage: .clone FILENAME\n");
      rc = 1;
    }
  }else
#endif /* !defined(SQLITE_SHELL_FIDDLE) */

  if( c=='c' && cli_strncmp(azArg[0], "connection", n)==0 ){
    if( nArg==1 ){
      /* List available connections */
      int i;
      for(i=0; i<ArraySize(p->aAuxDb); i++){
        const char *zFile = p->aAuxDb[i].zDbFilename;
        if( p->aAuxDb[i].db==0 && p->pAuxDb!=&p->aAuxDb[i] ){
          zFile = "(not open)";

      int i = azArg[1][0] - '0';
      if( p->pAuxDb != &p->aAuxDb[i] && i>=0 && i<ArraySize(p->aAuxDb) ){
        p->pAuxDb->db = p->db;
        p->pAuxDb = &p->aAuxDb[i];
        globalDb = p->db = p->pAuxDb->db;
        p->pAuxDb->db = 0;
      }
    }else if( nArg==3 && cli_strcmp(azArg[1], "close")==0
           && IsDigit(azArg[2][0]) && azArg[2][1]==0 ){
      int i = azArg[2][0] - '0';
      if( i<0 || i>=ArraySize(p->aAuxDb) ){
        /* No-op */
      }else if( p->pAuxDb == &p->aAuxDb[i] ){
        raw_printf(stderr, "cannot close the active database connection\n");
        rc = 1;
      }else if( p->aAuxDb[i].db ){
        session_close_all(p, i);
        close_db(p->aAuxDb[i].db);
        p->aAuxDb[i].db = 0;
      }
    }else{
      raw_printf(stderr, "Usage: .connection [close] [CONNECTION-NUMBER]\n");
      rc = 1;
    }
  }else

  if( c=='d' && n>1 && cli_strncmp(azArg[0], "databases", n)==0 ){
    char **azName = 0;
    int nName = 0;
    sqlite3_stmt *pStmt;
    int i;
    open_db(p, 0);
    rc = sqlite3_prepare_v2(p->db, "PRAGMA database_list", -1, &pStmt, 0);
    if( rc ){

            eTxn==SQLITE_TXN_READ ? " read-txn" : " write-txn");
      free(azName[i*2]);
      free(azName[i*2+1]);
    }
    sqlite3_free(azName);
  }else

  if( c=='d' && n>=3 && cli_strncmp(azArg[0], "dbconfig", n)==0 ){
    static const struct DbConfigChoices {
      const char *zName;
      int op;
    } aDbConfig[] = {
        { "defensive",          SQLITE_DBCONFIG_DEFENSIVE             },
        { "dqs_ddl",            SQLITE_DBCONFIG_DQS_DDL               },
        { "dqs_dml",            SQLITE_DBCONFIG_DQS_DML               },

        { "trigger_eqp",        SQLITE_DBCONFIG_TRIGGER_EQP           },
        { "trusted_schema",     SQLITE_DBCONFIG_TRUSTED_SCHEMA        },
        { "writable_schema",    SQLITE_DBCONFIG_WRITABLE_SCHEMA       },
    };
    int ii, v;
    open_db(p, 0);
    for(ii=0; ii<ArraySize(aDbConfig); ii++){
      if( nArg>1 && cli_strcmp(azArg[1], aDbConfig[ii].zName)!=0 ) continue;
      if( nArg>=3 ){
        sqlite3_db_config(p->db, aDbConfig[ii].op, booleanValue(azArg[2]), 0);
      }
      sqlite3_db_config(p->db, aDbConfig[ii].op, -1, &v);
      utf8_printf(p->out, "%19s %s\n", aDbConfig[ii].zName, v ? "on" : "off");
      if( nArg>1 ) break;
    }
    if( nArg>1 && ii==ArraySize(aDbConfig) ){
      utf8_printf(stderr, "Error: unknown dbconfig \"%s\"\n", azArg[1]);
      utf8_printf(stderr, "Enter \".dbconfig\" with no arguments for a list\n");
    }   
  }else

#if !defined(SQLITE_OMIT_VIRTUALTABLE) && defined(SQLITE_ENABLE_DBPAGE_VTAB)
  if( c=='d' && n>=3 && cli_strncmp(azArg[0], "dbinfo", n)==0 ){
    rc = shell_dbinfo_command(p, nArg, azArg);
  }else

  if( c=='r' && cli_strncmp(azArg[0], "recover", n)==0 ){
    open_db(p, 0);
    rc = recoverDatabaseCmd(p, nArg, azArg);
  }else
#endif /* !(SQLITE_OMIT_VIRTUALTABLE) && defined(SQLITE_ENABLE_DBPAGE_VTAB) */

  if( c=='d' && cli_strncmp(azArg[0], "dump", n)==0 ){
    char *zLike = 0;
    char *zSql;
    int i;
    int savedShowHeader = p->showHeader;
    int savedShellFlags = p->shellFlgs;
    ShellClearFlag(p,
       SHFLG_PreserveRowid|SHFLG_Newlines|SHFLG_Echo
       |SHFLG_DumpDataOnly|SHFLG_DumpNoSys);
    for(i=1; i<nArg; i++){
      if( azArg[i][0]=='-' ){
        const char *z = azArg[i]+1;
        if( z[0]=='-' ) z++;
        if( cli_strcmp(z,"preserve-rowids")==0 ){
#ifdef SQLITE_OMIT_VIRTUALTABLE
          raw_printf(stderr, "The --preserve-rowids option is not compatible"
                             " with SQLITE_OMIT_VIRTUALTABLE\n");
          rc = 1;
          sqlite3_free(zLike);
          goto meta_command_exit;
#else
          ShellSetFlag(p, SHFLG_PreserveRowid);
#endif
        }else
        if( cli_strcmp(z,"newlines")==0 ){
          ShellSetFlag(p, SHFLG_Newlines);
        }else
        if( cli_strcmp(z,"data-only")==0 ){
          ShellSetFlag(p, SHFLG_DumpDataOnly);
        }else
        if( cli_strcmp(z,"nosys")==0 ){
          ShellSetFlag(p, SHFLG_DumpNoSys);
        }else
        {
          raw_printf(stderr, "Unknown option \"%s\" on \".dump\"\n", azArg[i]);
          rc = 1;
          sqlite3_free(zLike);
          goto meta_command_exit;

    if( (p->shellFlgs & SHFLG_DumpDataOnly)==0 ){
      raw_printf(p->out, p->nErr?"ROLLBACK; -- due to errors\n":"COMMIT;\n");
    }
    p->showHeader = savedShowHeader;
    p->shellFlgs = savedShellFlags;
  }else

  if( c=='e' && cli_strncmp(azArg[0], "echo", n)==0 ){
    if( nArg==2 ){
      setOrClearFlag(p, SHFLG_Echo, azArg[1]);
    }else{
      raw_printf(stderr, "Usage: .echo on|off\n");
      rc = 1;
    }
  }else

  if( c=='e' && cli_strncmp(azArg[0], "eqp", n)==0 ){
    if( nArg==2 ){
      p->autoEQPtest = 0;
      if( p->autoEQPtrace ){
        if( p->db ) sqlite3_exec(p->db, "PRAGMA vdbe_trace=OFF;", 0, 0, 0);
        p->autoEQPtrace = 0;
      }
      if( cli_strcmp(azArg[1],"full")==0 ){
        p->autoEQP = AUTOEQP_full;
      }else if( cli_strcmp(azArg[1],"trigger")==0 ){
        p->autoEQP = AUTOEQP_trigger;
#ifdef SQLITE_DEBUG
      }else if( cli_strcmp(azArg[1],"test")==0 ){
        p->autoEQP = AUTOEQP_on;
        p->autoEQPtest = 1;
      }else if( cli_strcmp(azArg[1],"trace")==0 ){
        p->autoEQP = AUTOEQP_full;
        p->autoEQPtrace = 1;
        open_db(p, 0);
        sqlite3_exec(p->db, "SELECT name FROM sqlite_schema LIMIT 1", 0, 0, 0);
        sqlite3_exec(p->db, "PRAGMA vdbe_trace=ON;", 0, 0, 0);
#endif
      }else{
        p->autoEQP = (u8)booleanValue(azArg[1]);
      }
    }else{
      raw_printf(stderr, "Usage: .eqp off|on|trace|trigger|full\n");
      rc = 1;
    }
  }else

#ifndef SQLITE_SHELL_FIDDLE
  if( c=='e' && cli_strncmp(azArg[0], "exit", n)==0 ){
    if( nArg>1 && (rc = (int)integerValue(azArg[1]))!=0 ) exit(rc);
    rc = 2;
  }else
#endif

  /* The ".explain" command is automatic now.  It is largely pointless.  It
  ** retained purely for backwards compatibility */
  if( c=='e' && cli_strncmp(azArg[0], "explain", n)==0 ){
    int val = 1;
    if( nArg>=2 ){
      if( cli_strcmp(azArg[1],"auto")==0 ){
        val = 99;
      }else{
        val =  booleanValue(azArg[1]);
      }
    }
    if( val==1 && p->mode!=MODE_Explain ){
      p->normalMode = p->mode;
      p->mode = MODE_Explain;
      p->autoExplain = 0;
    }else if( val==0 ){
      if( p->mode==MODE_Explain ) p->mode = p->normalMode;
      p->autoExplain = 0;
    }else if( val==99 ){
      if( p->mode==MODE_Explain ) p->mode = p->normalMode;
      p->autoExplain = 1;
    }
  }else

#ifndef SQLITE_OMIT_VIRTUALTABLE
  if( c=='e' && cli_strncmp(azArg[0], "expert", n)==0 ){
    if( p->bSafeMode ){
      raw_printf(stderr, 
        "Cannot run experimental commands such as \"%s\" in safe mode\n",
        azArg[0]);
      rc = 1;
    }else{
      open_db(p, 0);
      expertDotCommand(p, azArg, nArg);
    }
  }else
#endif

  if( c=='f' && cli_strncmp(azArg[0], "filectrl", n)==0 ){
    static const struct {
       const char *zCtrlName;   /* Name of a test-control option */
       int ctrlCode;            /* Integer code for that option */
       const char *zUsage;      /* Usage notes */
    } aCtrl[] = {
      { "chunk_size",     SQLITE_FCNTL_CHUNK_SIZE,      "SIZE"           },
      { "data_version",   SQLITE_FCNTL_DATA_VERSION,    ""               },

    const char *zCmd = 0;
    const char *zSchema = 0;

    open_db(p, 0);
    zCmd = nArg>=2 ? azArg[1] : "help";

    if( zCmd[0]=='-' 
     && (cli_strcmp(zCmd,"--schema")==0 || cli_strcmp(zCmd,"-schema")==0)
     && nArg>=4
    ){
      zSchema = azArg[2];
      for(i=3; i<nArg; i++) azArg[i-2] = azArg[i];
      nArg -= 2;
      zCmd = azArg[1];
    }

    /* The argument can optionally begin with "-" or "--" */
    if( zCmd[0]=='-' && zCmd[1] ){
      zCmd++;
      if( zCmd[0]=='-' && zCmd[1] ) zCmd++;
    }

    /* --help lists all file-controls */
    if( cli_strcmp(zCmd,"help")==0 ){
      utf8_printf(p->out, "Available file-controls:\n");
      for(i=0; i<ArraySize(aCtrl); i++){
        utf8_printf(p->out, "  .filectrl %s %s\n",
                    aCtrl[i].zCtrlName, aCtrl[i].zUsage);
      }
      rc = 1;
      goto meta_command_exit;
    }

    /* convert filectrl text option to value. allow any unique prefix
    ** of the option name, or a numerical value. */
    n2 = strlen30(zCmd);
    for(i=0; i<ArraySize(aCtrl); i++){
      if( cli_strncmp(zCmd, aCtrl[i].zCtrlName, n2)==0 ){
        if( filectrl<0 ){
          filectrl = aCtrl[i].ctrlCode;
          iCtrl = i;
        }else{
          utf8_printf(stderr, "Error: ambiguous file-control: \"%s\"\n"
                              "Use \".filectrl --help\" for help\n", zCmd);
          rc = 1;

    }else if( isOk==1 ){
      char zBuf[100];
      sqlite3_snprintf(sizeof(zBuf), zBuf, "%lld", iRes);
      raw_printf(p->out, "%s\n", zBuf);
    }
  }else

  if( c=='f' && cli_strncmp(azArg[0], "fullschema", n)==0 ){
    ShellState data;
    int doStats = 0;
    memcpy(&data, p, sizeof(data));
    data.showHeader = 0;
    data.cMode = data.mode = MODE_Semi;
    if( nArg==2 && optionMatch(azArg[1], "indent") ){
      data.cMode = data.mode = MODE_Pretty;

      shell_exec(&data, "SELECT * FROM sqlite_stat1", 0);
      data.zDestTable = "sqlite_stat4";
      shell_exec(&data, "SELECT * FROM sqlite_stat4", 0);
      raw_printf(p->out, "ANALYZE sqlite_schema;\n");
    }
  }else

  if( c=='h' && cli_strncmp(azArg[0], "headers", n)==0 ){
    if( nArg==2 ){
      p->showHeader = booleanValue(azArg[1]);
      p->shellFlgs |= SHFLG_HeaderSet;
    }else{
      raw_printf(stderr, "Usage: .headers on|off\n");
      rc = 1;
    }
  }else

  if( c=='h' && cli_strncmp(azArg[0], "help", n)==0 ){
    if( nArg>=2 ){
      n = showHelp(p->out, azArg[1]);
      if( n==0 ){
        utf8_printf(p->out, "Nothing matches '%s'\n", azArg[1]);
      }
    }else{
      showHelp(p->out, 0);
    }
  }else

#ifndef SQLITE_SHELL_FIDDLE
  if( c=='i' && cli_strncmp(azArg[0], "import", n)==0 ){
    char *zTable = 0;           /* Insert data into this table */
    char *zSchema = 0;          /* within this schema (may default to "main") */
    char *zFile = 0;            /* Name of file to extra content from */
    sqlite3_stmt *pStmt = NULL; /* A statement */
    int nCol;                   /* Number of columns in the table */
    int nByte;                  /* Number of bytes in an SQL string */
    int i, j;                   /* Loop counters */

        }else if( zTable==0 ){
          zTable = z;
        }else{
          utf8_printf(p->out, "ERROR: extra argument: \"%s\".  Usage:\n", z);
          showHelp(p->out, "import");
          goto meta_command_exit;
        }
      }else if( cli_strcmp(z,"-v")==0 ){
        eVerbose++;
      }else if( cli_strcmp(z,"-schema")==0 && i<nArg-1 ){
        zSchema = azArg[++i];
      }else if( cli_strcmp(z,"-skip")==0 && i<nArg-1 ){
        nSkip = integerValue(azArg[++i]);
      }else if( cli_strcmp(z,"-ascii")==0 ){
        sCtx.cColSep = SEP_Unit[0];
        sCtx.cRowSep = SEP_Record[0];
        xRead = ascii_read_one_field;
        useOutputMode = 0;
      }else if( cli_strcmp(z,"-csv")==0 ){
        sCtx.cColSep = ',';
        sCtx.cRowSep = '\n';
        xRead = csv_read_one_field;
        useOutputMode = 0;
      }else{
        utf8_printf(p->out, "ERROR: unknown option: \"%s\".  Usage:\n", z);
        showHelp(p->out, "import");

      }
      nSep = strlen30(p->rowSeparator);
      if( nSep==0 ){
        raw_printf(stderr,
            "Error: non-null row separator required for import\n");
        goto meta_command_exit;
      }
      if( nSep==2 && p->mode==MODE_Csv
       && cli_strcmp(p->rowSeparator,SEP_CrLf)==0
      ){
        /* When importing CSV (only), if the row separator is set to the
        ** default output row separator, change it to the default input
        ** row separator.  This avoids having to maintain different input
        ** and output row separators. */
        sqlite3_snprintf(sizeof(p->rowSeparator), p->rowSeparator, SEP_Row);
        nSep = strlen30(p->rowSeparator);
      }

    if( needCommit ) sqlite3_exec(p->db, "COMMIT", 0, 0, 0);
    if( eVerbose>0 ){
      utf8_printf(p->out,
          "Added %d rows with %d errors using %d lines of input\n",
          sCtx.nRow, sCtx.nErr, sCtx.nLine-1);
    }
  }else
#endif /* !defined(SQLITE_SHELL_FIDDLE) */

#ifndef SQLITE_UNTESTABLE
  if( c=='i' && cli_strncmp(azArg[0], "imposter", n)==0 ){
    char *zSql;
    char *zCollist = 0;
    sqlite3_stmt *pStmt;
    int tnum = 0;
    int isWO = 0;  /* True if making an imposter of a WITHOUT ROWID table */
    int lenPK = 0; /* Length of the PRIMARY KEY string for isWO tables */
    int i;

      rc = 1;
    }
    sqlite3_free(zSql);
  }else
#endif /* !defined(SQLITE_OMIT_TEST_CONTROL) */

#ifdef SQLITE_ENABLE_IOTRACE
  if( c=='i' && cli_strncmp(azArg[0], "iotrace", n)==0 ){
    SQLITE_API extern void (SQLITE_CDECL *sqlite3IoTrace)(const char*, ...);
    if( iotrace && iotrace!=stdout ) fclose(iotrace);
    iotrace = 0;
    if( nArg<2 ){
      sqlite3IoTrace = 0;
    }else if( cli_strcmp(azArg[1], "-")==0 ){
      sqlite3IoTrace = iotracePrintf;
      iotrace = stdout;
    }else{
      iotrace = fopen(azArg[1], "w");
      if( iotrace==0 ){
        utf8_printf(stderr, "Error: cannot open \"%s\"\n", azArg[1]);
        sqlite3IoTrace = 0;
        rc = 1;
      }else{
        sqlite3IoTrace = iotracePrintf;
      }
    }
  }else
#endif

  if( c=='l' && n>=5 && cli_strncmp(azArg[0], "limits", n)==0 ){
    static const struct {
       const char *zLimitName;   /* Name of a limit */
       int limitCode;            /* Integer code for that limit */
    } aLimit[] = {
      { "length",                SQLITE_LIMIT_LENGTH                    },
      { "sql_length",            SQLITE_LIMIT_SQL_LENGTH                },
      { "column",                SQLITE_LIMIT_COLUMN                    },

                      (int)integerValue(azArg[2]));
      }
      printf("%20s %d\n", aLimit[iLimit].zLimitName,
             sqlite3_limit(p->db, aLimit[iLimit].limitCode, -1));
    }
  }else

  if( c=='l' && n>2 && cli_strncmp(azArg[0], "lint", n)==0 ){
    open_db(p, 0);
    lintDotCommand(p, azArg, nArg);
  }else

#if !defined(SQLITE_OMIT_LOAD_EXTENSION) && !defined(SQLITE_SHELL_FIDDLE)
  if( c=='l' && cli_strncmp(azArg[0], "load", n)==0 ){
    const char *zFile, *zProc;
    char *zErrMsg = 0;
    failIfSafeMode(p, "cannot run .load in safe mode");
    if( nArg<2 ){
      raw_printf(stderr, "Usage: .load FILE ?ENTRYPOINT?\n");
      rc = 1;
      goto meta_command_exit;
    }
    zFile = azArg[1];
    zProc = nArg>=3 ? azArg[2] : 0;
    open_db(p, 0);
    rc = sqlite3_load_extension(p->db, zFile, zProc, &zErrMsg);
    if( rc!=SQLITE_OK ){
      utf8_printf(stderr, "Error: %s\n", zErrMsg);
      sqlite3_free(zErrMsg);
      rc = 1;
    }
  }else
#endif

#ifndef SQLITE_SHELL_FIDDLE
  if( c=='l' && cli_strncmp(azArg[0], "log", n)==0 ){
    failIfSafeMode(p, "cannot run .log in safe mode");
    if( nArg!=2 ){
      raw_printf(stderr, "Usage: .log FILENAME\n");
      rc = 1;
    }else{
      const char *zFile = azArg[1];
      output_file_close(p->pLog);
      p->pLog = output_file_open(zFile, 0);
    }
  }else
#endif

  if( c=='m' && cli_strncmp(azArg[0], "mode", n)==0 ){
    const char *zMode = 0;
    const char *zTabname = 0;
    int i, n2;
    ColModeOpts cmOpts = ColModeOpts_default;
    for(i=1; i<nArg; i++){
      const char *z = azArg[i];
      if( optionMatch(z,"wrap") && i+1<nArg ){
        cmOpts.iWrap = integerValue(azArg[++i]);
      }else if( optionMatch(z,"ww") ){
        cmOpts.bWordWrap = 1;
      }else if( optionMatch(z,"wordwrap") && i+1<nArg ){
        cmOpts.bWordWrap = (u8)booleanValue(azArg[++i]);
      }else if( optionMatch(z,"quote") ){
        cmOpts.bQuote = 1;
      }else if( optionMatch(z,"noquote") ){
        cmOpts.bQuote = 0;
      }else if( zMode==0 ){
        zMode = z;
        /* Apply defaults for qbox pseudo-mode.  If that
         * overwrites already-set values, user was informed of this.
         */
        if( cli_strcmp(z, "qbox")==0 ){
          ColModeOpts cmo = ColModeOpts_default_qbox;
          zMode = "box";
          cmOpts = cmo;
        }
      }else if( zTabname==0 ){
        zTabname = z;
      }else if( z[0]=='-' ){

           p->cmOpts.bQuote ? "" : "no");
      }else{
        raw_printf(p->out, "current output mode: %s\n", modeDescr[p->mode]);
      }
      zMode = modeDescr[p->mode];
    }
    n2 = strlen30(zMode);
    if( cli_strncmp(zMode,"lines",n2)==0 ){
      p->mode = MODE_Line;
      sqlite3_snprintf(sizeof(p->rowSeparator), p->rowSeparator, SEP_Row);
    }else if( cli_strncmp(zMode,"columns",n2)==0 ){
      p->mode = MODE_Column;
      if( (p->shellFlgs & SHFLG_HeaderSet)==0 ){
        p->showHeader = 1;
      }
      sqlite3_snprintf(sizeof(p->rowSeparator), p->rowSeparator, SEP_Row);
      p->cmOpts = cmOpts;
    }else if( cli_strncmp(zMode,"list",n2)==0 ){
      p->mode = MODE_List;
      sqlite3_snprintf(sizeof(p->colSeparator), p->colSeparator, SEP_Column);
      sqlite3_snprintf(sizeof(p->rowSeparator), p->rowSeparator, SEP_Row);
    }else if( cli_strncmp(zMode,"html",n2)==0 ){
      p->mode = MODE_Html;
    }else if( cli_strncmp(zMode,"tcl",n2)==0 ){
      p->mode = MODE_Tcl;
      sqlite3_snprintf(sizeof(p->colSeparator), p->colSeparator, SEP_Space);
      sqlite3_snprintf(sizeof(p->rowSeparator), p->rowSeparator, SEP_Row);
    }else if( cli_strncmp(zMode,"csv",n2)==0 ){
      p->mode = MODE_Csv;
      sqlite3_snprintf(sizeof(p->colSeparator), p->colSeparator, SEP_Comma);
      sqlite3_snprintf(sizeof(p->rowSeparator), p->rowSeparator, SEP_CrLf);
    }else if( cli_strncmp(zMode,"tabs",n2)==0 ){
      p->mode = MODE_List;
      sqlite3_snprintf(sizeof(p->colSeparator), p->colSeparator, SEP_Tab);
    }else if( cli_strncmp(zMode,"insert",n2)==0 ){
      p->mode = MODE_Insert;
      set_table_name(p, zTabname ? zTabname : "table");
    }else if( cli_strncmp(zMode,"quote",n2)==0 ){
      p->mode = MODE_Quote;
      sqlite3_snprintf(sizeof(p->colSeparator), p->colSeparator, SEP_Comma);
      sqlite3_snprintf(sizeof(p->rowSeparator), p->rowSeparator, SEP_Row);
    }else if( cli_strncmp(zMode,"ascii",n2)==0 ){
      p->mode = MODE_Ascii;
      sqlite3_snprintf(sizeof(p->colSeparator), p->colSeparator, SEP_Unit);
      sqlite3_snprintf(sizeof(p->rowSeparator), p->rowSeparator, SEP_Record);
    }else if( cli_strncmp(zMode,"markdown",n2)==0 ){
      p->mode = MODE_Markdown;
      p->cmOpts = cmOpts;
    }else if( cli_strncmp(zMode,"table",n2)==0 ){
      p->mode = MODE_Table;
      p->cmOpts = cmOpts;
    }else if( cli_strncmp(zMode,"box",n2)==0 ){
      p->mode = MODE_Box;
      p->cmOpts = cmOpts;
    }else if( cli_strncmp(zMode,"count",n2)==0 ){
      p->mode = MODE_Count;
    }else if( cli_strncmp(zMode,"off",n2)==0 ){
      p->mode = MODE_Off;
    }else if( cli_strncmp(zMode,"json",n2)==0 ){
      p->mode = MODE_Json;
    }else{
      raw_printf(stderr, "Error: mode should be one of: "
         "ascii box column csv html insert json line list markdown "
         "qbox quote table tabs tcl\n");
      rc = 1;
    }
    p->cMode = p->mode;
  }else

#ifndef SQLITE_SHELL_FIDDLE
  if( c=='n' && cli_strcmp(azArg[0], "nonce")==0 ){
    if( nArg!=2 ){
      raw_printf(stderr, "Usage: .nonce NONCE\n");
      rc = 1;
    }else if( p->zNonce==0 || cli_strcmp(azArg[1],p->zNonce)!=0 ){
      raw_printf(stderr, "line %d: incorrect nonce: \"%s\"\n",
                 p->lineno, azArg[1]);
      exit(1);
    }else{
      p->bSafeMode = 0;
      return 0;  /* Return immediately to bypass the safe mode reset
                 ** at the end of this procedure */
    }
  }else
#endif /* !defined(SQLITE_SHELL_FIDDLE) */

  if( c=='n' && cli_strncmp(azArg[0], "nullvalue", n)==0 ){
    if( nArg==2 ){
      sqlite3_snprintf(sizeof(p->nullValue), p->nullValue,
                       "%.*s", (int)ArraySize(p->nullValue)-1, azArg[1]);
    }else{
      raw_printf(stderr, "Usage: .nullvalue STRING\n");
      rc = 1;
    }
  }else

  if( c=='o' && cli_strncmp(azArg[0], "open", n)==0 && n>=2 ){
    const char *zFN = 0;     /* Pointer to constant filename */
    char *zNewFilename = 0;  /* Name of the database file to open */
    int iName = 1;           /* Index in azArg[] of the filename */
    int newFlag = 0;         /* True to delete file before opening */
    int openMode = SHELL_OPEN_UNSPEC;

    /* Check for command-line arguments */
    for(iName=1; iName<nArg; iName++){
      const char *z = azArg[iName];
#ifndef SQLITE_SHELL_FIDDLE
      if( optionMatch(z,"new") ){
        newFlag = 1;
#ifdef SQLITE_HAVE_ZLIB
      }else if( optionMatch(z, "zip") ){
        openMode = SHELL_OPEN_ZIPFILE;
#endif
      }else if( optionMatch(z, "append") ){

        openMode = SHELL_OPEN_DESERIALIZE;
      }else if( optionMatch(z, "hexdb") ){
        openMode = SHELL_OPEN_HEXDB;
      }else if( optionMatch(z, "maxsize") && iName+1<nArg ){
        p->szMax = integerValue(azArg[++iName]);
#endif /* SQLITE_OMIT_DESERIALIZE */
      }else
#endif /* !SQLITE_SHELL_FIDDLE */
      if( z[0]=='-' ){
        utf8_printf(stderr, "unknown option: %s\n", z);
        rc = 1;
        goto meta_command_exit;
      }else if( zFN ){
        utf8_printf(stderr, "extra argument: \"%s\"\n", z);
        rc = 1;

    p->openMode = openMode;
    p->openFlags = 0;
    p->szMax = 0;

    /* If a filename is specified, try to open it first */
    if( zFN || p->openMode==SHELL_OPEN_HEXDB ){
      if( newFlag && zFN && !p->bSafeMode ) shellDeleteFile(zFN);
#ifndef SQLITE_SHELL_FIDDLE
      if( p->bSafeMode
       && p->openMode!=SHELL_OPEN_HEXDB
       && zFN
       && cli_strcmp(zFN,":memory:")!=0
      ){
        failIfSafeMode(p, "cannot open disk-based database files in safe mode");
      }
#else
      /* WASM mode has its own sandboxed pseudo-filesystem. */
#endif
      if( zFN ){

    if( p->db==0 ){
      /* As a fall-back open a TEMP database */
      p->pAuxDb->zDbFilename = 0;
      open_db(p, 0);
    }
  }else

#ifndef SQLITE_SHELL_FIDDLE
  if( (c=='o'
        && (cli_strncmp(azArg[0], "output", n)==0
            || cli_strncmp(azArg[0], "once", n)==0))
   || (c=='e' && n==5 && cli_strcmp(azArg[0],"excel")==0)
  ){
    char *zFile = 0;
    int bTxtMode = 0;
    int i;
    int eMode = 0;
    int bOnce = 0;            /* 0: .output, 1: .once, 2: .excel */
    unsigned char zBOM[4];    /* Byte-order mark to using if --bom is present */

    zBOM[0] = 0;
    failIfSafeMode(p, "cannot run .%s in safe mode", azArg[0]);
    if( c=='e' ){
      eMode = 'x';
      bOnce = 2;
    }else if( cli_strncmp(azArg[0],"once",n)==0 ){
      bOnce = 1;
    }
    for(i=1; i<nArg; i++){
      char *z = azArg[i];
      if( z[0]=='-' ){
        if( z[1]=='-' ) z++;
        if( cli_strcmp(z,"-bom")==0 ){
          zBOM[0] = 0xef;
          zBOM[1] = 0xbb;
          zBOM[2] = 0xbf;
          zBOM[3] = 0;
        }else if( c!='e' && cli_strcmp(z,"-x")==0 ){
          eMode = 'x';  /* spreadsheet */
        }else if( c!='e' && cli_strcmp(z,"-e")==0 ){
          eMode = 'e';  /* text editor */
        }else{
          utf8_printf(p->out, "ERROR: unknown option: \"%s\".  Usage:\n",
                      azArg[i]);
          showHelp(p->out, azArg[0]);
          rc = 1;
          goto meta_command_exit;

        if( zBOM[0] ) fwrite(zBOM, 1, 3, p->out);
        sqlite3_snprintf(sizeof(p->outfile), p->outfile, "%s", zFile);
      }
#endif
    }else{
      p->out = output_file_open(zFile, bTxtMode);
      if( p->out==0 ){
        if( cli_strcmp(zFile,"off")!=0 ){
          utf8_printf(stderr,"Error: cannot write to \"%s\"\n", zFile);
        }
        p->out = stdout;
        rc = 1;
      } else {
        if( zBOM[0] ) fwrite(zBOM, 1, 3, p->out);
        sqlite3_snprintf(sizeof(p->outfile), p->outfile, "%s", zFile);
      }
    }
    sqlite3_free(zFile);
  }else
#endif /* !defined(SQLITE_SHELL_FIDDLE) */

  if( c=='p' && n>=3 && cli_strncmp(azArg[0], "parameter", n)==0 ){
    open_db(p,0);
    if( nArg<=1 ) goto parameter_syntax_error;

    /* .parameter clear
    ** Clear all bind parameters by dropping the TEMP table that holds them.
    */
    if( nArg==2 && cli_strcmp(azArg[1],"clear")==0 ){
      sqlite3_exec(p->db, "DROP TABLE IF EXISTS temp.sqlite_parameters;",
                   0, 0, 0);
    }else

    /* .parameter list
    ** List all bind parameters.
    */
    if( nArg==2 && cli_strcmp(azArg[1],"list")==0 ){
      sqlite3_stmt *pStmt = 0;
      int rx;
      int len = 0;
      rx = sqlite3_prepare_v2(p->db,
             "SELECT max(length(key)) "
             "FROM temp.sqlite_parameters;", -1, &pStmt, 0);
      if( rx==SQLITE_OK && sqlite3_step(pStmt)==SQLITE_ROW ){

      }
    }else

    /* .parameter init
    ** Make sure the TEMP table used to hold bind parameters exists.
    ** Create it if necessary.
    */
    if( nArg==2 && cli_strcmp(azArg[1],"init")==0 ){
      bind_table_init(p);
    }else

    /* .parameter set NAME VALUE
    ** Set or reset a bind parameter.  NAME should be the full parameter
    ** name exactly as it appears in the query.  (ex: $abc, @def).  The
    ** VALUE can be in either SQL literal notation, or if not it will be
    ** understood to be a text string.
    */
    if( nArg==4 && cli_strcmp(azArg[1],"set")==0 ){
      int rx;
      char *zSql;
      sqlite3_stmt *pStmt;
      const char *zKey = azArg[2];
      const char *zValue = azArg[3];
      bind_table_init(p);
      zSql = sqlite3_mprintf(

      sqlite3_finalize(pStmt);
    }else

    /* .parameter unset NAME
    ** Remove the NAME binding from the parameter binding table, if it
    ** exists.
    */
    if( nArg==3 && cli_strcmp(azArg[1],"unset")==0 ){
      char *zSql = sqlite3_mprintf(
          "DELETE FROM temp.sqlite_parameters WHERE key=%Q", azArg[2]);
      shell_check_oom(zSql);
      sqlite3_exec(p->db, zSql, 0, 0, 0);
      sqlite3_free(zSql);
    }else
    /* If no command name matches, show a syntax error */
    parameter_syntax_error:
    showHelp(p->out, "parameter");
  }else

  if( c=='p' && n>=3 && cli_strncmp(azArg[0], "print", n)==0 ){
    int i;
    for(i=1; i<nArg; i++){
      if( i>1 ) raw_printf(p->out, " ");
      utf8_printf(p->out, "%s", azArg[i]);
    }
    raw_printf(p->out, "\n");
  }else

#ifndef SQLITE_OMIT_PROGRESS_CALLBACK
  if( c=='p' && n>=3 && cli_strncmp(azArg[0], "progress", n)==0 ){
    int i;
    int nn = 0;
    p->flgProgress = 0;
    p->mxProgress = 0;
    p->nProgress = 0;
    for(i=1; i<nArg; i++){
      const char *z = azArg[i];
      if( z[0]=='-' ){
        z++;
        if( z[0]=='-' ) z++;
        if( cli_strcmp(z,"quiet")==0 || cli_strcmp(z,"q")==0 ){
          p->flgProgress |= SHELL_PROGRESS_QUIET;
          continue;
        }
        if( cli_strcmp(z,"reset")==0 ){
          p->flgProgress |= SHELL_PROGRESS_RESET;
          continue;
        }
        if( cli_strcmp(z,"once")==0 ){
          p->flgProgress |= SHELL_PROGRESS_ONCE;
          continue;
        }
        if( cli_strcmp(z,"limit")==0 ){
          if( i+1>=nArg ){
            utf8_printf(stderr, "Error: missing argument on --limit\n");
            rc = 1;
            goto meta_command_exit;
          }else{
            p->mxProgress = (int)integerValue(azArg[++i]);
          }

      }
    }
    open_db(p, 0);
    sqlite3_progress_handler(p->db, nn, progress_handler, p);
  }else
#endif /* SQLITE_OMIT_PROGRESS_CALLBACK */

  if( c=='p' && cli_strncmp(azArg[0], "prompt", n)==0 ){
    if( nArg >= 2) {
      strncpy(mainPrompt,azArg[1],(int)ArraySize(mainPrompt)-1);
    }
    if( nArg >= 3) {
      strncpy(continuePrompt,azArg[2],(int)ArraySize(continuePrompt)-1);
    }
  }else

#ifndef SQLITE_SHELL_FIDDLE
  if( c=='q' && cli_strncmp(azArg[0], "quit", n)==0 ){
    rc = 2;
  }else
#endif

#ifndef SQLITE_SHELL_FIDDLE
  if( c=='r' && n>=3 && cli_strncmp(azArg[0], "read", n)==0 ){
    FILE *inSaved = p->in;
    int savedLineno = p->lineno;
    failIfSafeMode(p, "cannot run .read in safe mode");
    if( nArg!=2 ){
      raw_printf(stderr, "Usage: .read FILE\n");
      rc = 1;
      goto meta_command_exit;

    }else{
      rc = process_input(p);
      fclose(p->in);
    }
    p->in = inSaved;
    p->lineno = savedLineno;
  }else
#endif /* !defined(SQLITE_SHELL_FIDDLE) */

#ifndef SQLITE_SHELL_FIDDLE
  if( c=='r' && n>=3 && cli_strncmp(azArg[0], "restore", n)==0 ){
    const char *zSrcFile;
    const char *zDb;
    sqlite3 *pSrc;
    sqlite3_backup *pBackup;
    int nTimeout = 0;

    failIfSafeMode(p, "cannot run .restore in safe mode");

      rc = 1;
    }else{
      utf8_printf(stderr, "Error: %s\n", sqlite3_errmsg(p->db));
      rc = 1;
    }
    close_db(pSrc);
  }else
#endif /* !defined(SQLITE_SHELL_FIDDLE) */

  if( c=='s' && cli_strncmp(azArg[0], "scanstats", n)==0 ){
    if( nArg==2 ){
      p->scanstatsOn = (u8)booleanValue(azArg[1]);
#ifndef SQLITE_ENABLE_STMT_SCANSTATUS
      raw_printf(stderr, "Warning: .scanstats not available in this build.\n");
#endif
    }else{
      raw_printf(stderr, "Usage: .scanstats on|off\n");
      rc = 1;
    }
  }else

  if( c=='s' && cli_strncmp(azArg[0], "schema", n)==0 ){
    ShellText sSelect;
    ShellState data;
    char *zErrMsg = 0;
    const char *zDiv = "(";
    const char *zName = 0;
    int iSchema = 0;
    int bDebug = 0;

      raw_printf(stderr,"Error: querying schema information\n");
      rc = 1;
    }else{
      rc = 0;
    }
  }else

  if( (c=='s' && n==11 && cli_strncmp(azArg[0], "selecttrace", n)==0)
   || (c=='t' && n==9  && cli_strncmp(azArg[0], "treetrace", n)==0)
  ){
    unsigned int x = nArg>=2 ? (unsigned int)integerValue(azArg[1]) : 0xffffffff;
    sqlite3_test_control(SQLITE_TESTCTRL_TRACEFLAGS, 1, &x);
  }else

#if defined(SQLITE_ENABLE_SESSION)
  if( c=='s' && cli_strncmp(azArg[0],"session",n)==0 && n>=3 ){
    struct AuxDb *pAuxDb = p->pAuxDb;
    OpenSession *pSession = &pAuxDb->aSession[0];
    char **azCmd = &azArg[1];
    int iSes = 0;
    int nCmd = nArg - 1;
    int i;
    if( nArg<=1 ) goto session_syntax_error;
    open_db(p, 0);
    if( nArg>=3 ){
      for(iSes=0; iSes<pAuxDb->nSession; iSes++){
        if( cli_strcmp(pAuxDb->aSession[iSes].zName, azArg[1])==0 ) break;
      }
      if( iSes<pAuxDb->nSession ){
        pSession = &pAuxDb->aSession[iSes];
        azCmd++;
        nCmd--;
      }else{
        pSession = &pAuxDb->aSession[0];
        iSes = 0;
      }
    }

    /* .session attach TABLE
    ** Invoke the sqlite3session_attach() interface to attach a particular
    ** table so that it is never filtered.
    */
    if( cli_strcmp(azCmd[0],"attach")==0 ){
      if( nCmd!=2 ) goto session_syntax_error;
      if( pSession->p==0 ){
        session_not_open:
        raw_printf(stderr, "ERROR: No sessions are open\n");
      }else{
        rc = sqlite3session_attach(pSession->p, azCmd[1]);
        if( rc ){
          raw_printf(stderr, "ERROR: sqlite3session_attach() returns %d\n", rc);
          rc = 0;
        }
      }
    }else

    /* .session changeset FILE
    ** .session patchset FILE
    ** Write a changeset or patchset into a file.  The file is overwritten.
    */
    if( cli_strcmp(azCmd[0],"changeset")==0
     || cli_strcmp(azCmd[0],"patchset")==0
    ){
      FILE *out = 0;
      failIfSafeMode(p, "cannot run \".session %s\" in safe mode", azCmd[0]);
      if( nCmd!=2 ) goto session_syntax_error;
      if( pSession->p==0 ) goto session_not_open;
      out = fopen(azCmd[1], "wb");
      if( out==0 ){
        utf8_printf(stderr, "ERROR: cannot open \"%s\" for writing\n",

        fclose(out);
      }
    }else

    /* .session close
    ** Close the identified session
    */
    if( cli_strcmp(azCmd[0], "close")==0 ){
      if( nCmd!=1 ) goto session_syntax_error;
      if( pAuxDb->nSession ){
        session_close(pSession);
        pAuxDb->aSession[iSes] = pAuxDb->aSession[--pAuxDb->nSession];
      }
    }else

    /* .session enable ?BOOLEAN?
    ** Query or set the enable flag
    */
    if( cli_strcmp(azCmd[0], "enable")==0 ){
      int ii;
      if( nCmd>2 ) goto session_syntax_error;
      ii = nCmd==1 ? -1 : booleanValue(azCmd[1]);
      if( pAuxDb->nSession ){
        ii = sqlite3session_enable(pSession->p, ii);
        utf8_printf(p->out, "session %s enable flag = %d\n",
                    pSession->zName, ii);
      }
    }else

    /* .session filter GLOB ....
    ** Set a list of GLOB patterns of table names to be excluded.
    */
    if( cli_strcmp(azCmd[0], "filter")==0 ){
      int ii, nByte;
      if( nCmd<2 ) goto session_syntax_error;
      if( pAuxDb->nSession ){
        for(ii=0; ii<pSession->nFilter; ii++){
          sqlite3_free(pSession->azFilter[ii]);
        }
        sqlite3_free(pSession->azFilter);

        pSession->nFilter = ii-1;
      }
    }else

    /* .session indirect ?BOOLEAN?
    ** Query or set the indirect flag
    */
    if( cli_strcmp(azCmd[0], "indirect")==0 ){
      int ii;
      if( nCmd>2 ) goto session_syntax_error;
      ii = nCmd==1 ? -1 : booleanValue(azCmd[1]);
      if( pAuxDb->nSession ){
        ii = sqlite3session_indirect(pSession->p, ii);
        utf8_printf(p->out, "session %s indirect flag = %d\n",
                    pSession->zName, ii);
      }
    }else

    /* .session isempty
    ** Determine if the session is empty
    */
    if( cli_strcmp(azCmd[0], "isempty")==0 ){
      int ii;
      if( nCmd!=1 ) goto session_syntax_error;
      if( pAuxDb->nSession ){
        ii = sqlite3session_isempty(pSession->p);
        utf8_printf(p->out, "session %s isempty flag = %d\n",
                    pSession->zName, ii);
      }
    }else

    /* .session list
    ** List all currently open sessions
    */
    if( cli_strcmp(azCmd[0],"list")==0 ){
      for(i=0; i<pAuxDb->nSession; i++){
        utf8_printf(p->out, "%d %s\n", i, pAuxDb->aSession[i].zName);
      }
    }else

    /* .session open DB NAME
    ** Open a new session called NAME on the attached database DB.
    ** DB is normally "main".
    */
    if( cli_strcmp(azCmd[0],"open")==0 ){
      char *zName;
      if( nCmd!=3 ) goto session_syntax_error;
      zName = azCmd[2];
      if( zName[0]==0 ) goto session_syntax_error;
      for(i=0; i<pAuxDb->nSession; i++){
        if( cli_strcmp(pAuxDb->aSession[i].zName,zName)==0 ){
          utf8_printf(stderr, "Session \"%s\" already exists\n", zName);
          goto meta_command_exit;
        }
      }
      if( pAuxDb->nSession>=ArraySize(pAuxDb->aSession) ){
        raw_printf(stderr, "Maximum of %d sessions\n", ArraySize(pAuxDb->aSession));
        goto meta_command_exit;

    showHelp(p->out, "session");
  }else
#endif

#ifdef SQLITE_DEBUG
  /* Undocumented commands for internal testing.  Subject to change
  ** without notice. */
  if( c=='s' && n>=10 && cli_strncmp(azArg[0], "selftest-", 9)==0 ){
    if( cli_strncmp(azArg[0]+9, "boolean", n-9)==0 ){
      int i, v;
      for(i=1; i<nArg; i++){
        v = booleanValue(azArg[i]);
        utf8_printf(p->out, "%s: %d 0x%x\n", azArg[i], v, v);
      }
    }
    if( cli_strncmp(azArg[0]+9, "integer", n-9)==0 ){
      int i; sqlite3_int64 v;
      for(i=1; i<nArg; i++){
        char zBuf[200];
        v = integerValue(azArg[i]);
        sqlite3_snprintf(sizeof(zBuf),zBuf,"%s: %lld 0x%llx\n", azArg[i],v,v);
        utf8_printf(p->out, "%s", zBuf);
      }
    }
  }else
#endif

  if( c=='s' && n>=4 && cli_strncmp(azArg[0],"selftest",n)==0 ){
    int bIsInit = 0;         /* True to initialize the SELFTEST table */
    int bVerbose = 0;        /* Verbose output */
    int bSelftestExists;     /* True if SELFTEST already exists */
    int i, k;                /* Loop counters */
    int nTest = 0;           /* Number of tests runs */
    int nErr = 0;            /* Number of errors seen */
    ShellText str;           /* Answer for a query */
    sqlite3_stmt *pStmt = 0; /* Query against the SELFTEST table */

    open_db(p,0);
    for(i=1; i<nArg; i++){
      const char *z = azArg[i];
      if( z[0]=='-' && z[1]=='-' ) z++;
      if( cli_strcmp(z,"-init")==0 ){
        bIsInit = 1;
      }else
      if( cli_strcmp(z,"-v")==0 ){
        bVerbose++;
      }else
      {
        utf8_printf(stderr, "Unknown option \"%s\" on \"%s\"\n",
                    azArg[i], azArg[0]);
        raw_printf(stderr, "Should be one of: --init -v\n");
        rc = 1;

        if( zOp==0 ) continue;
        if( zSql==0 ) continue;
        if( zAns==0 ) continue;
        k = 0;
        if( bVerbose>0 ){
          printf("%d: %s %s\n", tno, zOp, zSql);
        }
        if( cli_strcmp(zOp,"memo")==0 ){
          utf8_printf(p->out, "%s\n", zSql);
        }else
        if( cli_strcmp(zOp,"run")==0 ){
          char *zErrMsg = 0;
          str.n = 0;
          str.z[0] = 0;
          rc = sqlite3_exec(p->db, zSql, captureOutputCallback, &str, &zErrMsg);
          nTest++;
          if( bVerbose ){
            utf8_printf(p->out, "Result: %s\n", str.z);
          }
          if( rc || zErrMsg ){
            nErr++;
            rc = 1;
            utf8_printf(p->out, "%d: error-code-%d: %s\n", tno, rc, zErrMsg);
            sqlite3_free(zErrMsg);
          }else if( cli_strcmp(zAns,str.z)!=0 ){
            nErr++;
            rc = 1;
            utf8_printf(p->out, "%d: Expected: [%s]\n", tno, zAns);
            utf8_printf(p->out, "%d:      Got: [%s]\n", tno, str.z);
          }
        }else
        {
          utf8_printf(stderr,
            "Unknown operation \"%s\" on selftest line %d\n", zOp, tno);
          rc = 1;
          break;
        }
      } /* End loop over rows of content from SELFTEST */
      sqlite3_finalize(pStmt);
    } /* End loop over k */
    freeText(&str);
    utf8_printf(p->out, "%d errors out of %d tests\n", nErr, nTest);
  }else

  if( c=='s' && cli_strncmp(azArg[0], "separator", n)==0 ){
    if( nArg<2 || nArg>3 ){
      raw_printf(stderr, "Usage: .separator COL ?ROW?\n");
      rc = 1;
    }
    if( nArg>=2 ){
      sqlite3_snprintf(sizeof(p->colSeparator), p->colSeparator,
                       "%.*s", (int)ArraySize(p->colSeparator)-1, azArg[1]);
    }
    if( nArg>=3 ){
      sqlite3_snprintf(sizeof(p->rowSeparator), p->rowSeparator,
                       "%.*s", (int)ArraySize(p->rowSeparator)-1, azArg[2]);
    }
  }else

  if( c=='s' && n>=4 && cli_strncmp(azArg[0],"sha3sum",n)==0 ){
    const char *zLike = 0;   /* Which table to checksum. 0 means everything */
    int i;                   /* Loop counter */
    int bSchema = 0;         /* Also hash the schema */
    int bSeparate = 0;       /* Hash each table separately */
    int iSize = 224;         /* Hash algorithm to use */
    int bDebug = 0;          /* Only show the query that would have run */
    sqlite3_stmt *pStmt;     /* For querying tables names */
    char *zSql;              /* SQL to be run */
    char *zSep;              /* Separator */
    ShellText sSql;          /* Complete SQL for the query to run the hash */
    ShellText sQuery;        /* Set of queries used to read all content */
    open_db(p, 0);
    for(i=1; i<nArg; i++){
      const char *z = azArg[i];
      if( z[0]=='-' ){
        z++;
        if( z[0]=='-' ) z++;
        if( cli_strcmp(z,"schema")==0 ){
          bSchema = 1;
        }else
        if( cli_strcmp(z,"sha3-224")==0 || cli_strcmp(z,"sha3-256")==0
         || cli_strcmp(z,"sha3-384")==0 || cli_strcmp(z,"sha3-512")==0
        ){
          iSize = atoi(&z[5]);
        }else
        if( cli_strcmp(z,"debug")==0 ){
          bDebug = 1;
        }else
        {
          utf8_printf(stderr, "Unknown option \"%s\" on \"%s\"\n",
                      azArg[i], azArg[0]);
          showHelp(p->out, azArg[0]);
          rc = 1;

    initText(&sSql);
    appendText(&sSql, "WITH [sha3sum$query](a,b) AS(",0);
    zSep = "VALUES(";
    while( SQLITE_ROW==sqlite3_step(pStmt) ){
      const char *zTab = (const char*)sqlite3_column_text(pStmt,0);
      if( zTab==0 ) continue;
      if( zLike && sqlite3_strlike(zLike, zTab, 0)!=0 ) continue;
      if( cli_strncmp(zTab, "sqlite_",7)!=0 ){
        appendText(&sQuery,"SELECT * FROM ", 0);
        appendText(&sQuery,zTab,'"');
        appendText(&sQuery," NOT INDEXED;", 0);
      }else if( cli_strcmp(zTab, "sqlite_schema")==0 ){
        appendText(&sQuery,"SELECT type,name,tbl_name,sql FROM sqlite_schema"
                           " ORDER BY name;", 0);
      }else if( cli_strcmp(zTab, "sqlite_sequence")==0 ){
        appendText(&sQuery,"SELECT name,seq FROM sqlite_sequence"
                           " ORDER BY name;", 0);
      }else if( cli_strcmp(zTab, "sqlite_stat1")==0 ){
        appendText(&sQuery,"SELECT tbl,idx,stat FROM sqlite_stat1"
                           " ORDER BY tbl,idx;", 0);
      }else if( cli_strcmp(zTab, "sqlite_stat4")==0 ){
        appendText(&sQuery, "SELECT * FROM ", 0);
        appendText(&sQuery, zTab, 0);
        appendText(&sQuery, " ORDER BY tbl, idx, rowid;\n", 0);
      }
      appendText(&sSql, zSep, 0);
      appendText(&sSql, sQuery.z, '\'');
      sQuery.n = 0;

      utf8_printf(p->out, "%s\n", zSql);
    }else{
      shell_exec(p, zSql, 0);
    }
    sqlite3_free(zSql);
  }else

#if !defined(SQLITE_NOHAVE_SYSTEM) && !defined(SQLITE_SHELL_FIDDLE)
  if( c=='s'
   && (cli_strncmp(azArg[0], "shell", n)==0
       || cli_strncmp(azArg[0],"system",n)==0)
  ){
    char *zCmd;
    int i, x;
    failIfSafeMode(p, "cannot run .%s in safe mode", azArg[0]);
    if( nArg<2 ){
      raw_printf(stderr, "Usage: .system COMMAND\n");
      rc = 1;
      goto meta_command_exit;
    }
    zCmd = sqlite3_mprintf(strchr(azArg[1],' ')==0?"%s":"\"%s\"", azArg[1]);
    for(i=2; i<nArg && zCmd!=0; i++){
      zCmd = sqlite3_mprintf(strchr(azArg[i],' ')==0?"%z %s":"%z \"%s\"",
                             zCmd, azArg[i]);
    }
    x = zCmd!=0 ? system(zCmd) : 1;
    sqlite3_free(zCmd);
    if( x ) raw_printf(stderr, "System command returns %d\n", x);
  }else
#endif /* !defined(SQLITE_NOHAVE_SYSTEM) && !defined(SQLITE_SHELL_FIDDLE) */

  if( c=='s' && cli_strncmp(azArg[0], "show", n)==0 ){
    static const char *azBool[] = { "off", "on", "trigger", "full"};
    const char *zOut;
    int i;
    if( nArg!=1 ){
      raw_printf(stderr, "Usage: .show\n");
      rc = 1;
      goto meta_command_exit;

      raw_printf(p->out, "%d ", p->colWidth[i]);
    }
    raw_printf(p->out, "\n");
    utf8_printf(p->out, "%12.12s: %s\n", "filename",
                p->pAuxDb->zDbFilename ? p->pAuxDb->zDbFilename : "");
  }else

  if( c=='s' && cli_strncmp(azArg[0], "stats", n)==0 ){
    if( nArg==2 ){
      if( cli_strcmp(azArg[1],"stmt")==0 ){
        p->statsOn = 2;
      }else if( cli_strcmp(azArg[1],"vmstep")==0 ){
        p->statsOn = 3;
      }else{
        p->statsOn = (u8)booleanValue(azArg[1]);
      }
    }else if( nArg==1 ){
      display_stats(p->db, p, 0);
    }else{
      raw_printf(stderr, "Usage: .stats ?on|off|stmt|vmstep?\n");
      rc = 1;
    }
  }else

  if( (c=='t' && n>1 && cli_strncmp(azArg[0], "tables", n)==0)
   || (c=='i' && (cli_strncmp(azArg[0], "indices", n)==0
                 || cli_strncmp(azArg[0], "indexes", n)==0) )
  ){
    sqlite3_stmt *pStmt;
    char **azResult;
    int nRow, nAlloc;
    int ii;
    ShellText s;
    initText(&s);

      }
    }

    for(ii=0; ii<nRow; ii++) sqlite3_free(azResult[ii]);
    sqlite3_free(azResult);
  }else

#ifndef SQLITE_SHELL_FIDDLE
  /* Begin redirecting output to the file "testcase-out.txt" */
  if( c=='t' && cli_strcmp(azArg[0],"testcase")==0 ){
    output_reset(p);
    p->out = output_file_open("testcase-out.txt", 0);
    if( p->out==0 ){
      raw_printf(stderr, "Error: cannot open 'testcase-out.txt'\n");
    }
    if( nArg>=2 ){
      sqlite3_snprintf(sizeof(p->zTestcase), p->zTestcase, "%s", azArg[1]);
    }else{
      sqlite3_snprintf(sizeof(p->zTestcase), p->zTestcase, "?");
    }
  }else
#endif /* !defined(SQLITE_SHELL_FIDDLE) */

#ifndef SQLITE_UNTESTABLE
  if( c=='t' && n>=8 && cli_strncmp(azArg[0], "testctrl", n)==0 ){
    static const struct {
       const char *zCtrlName;   /* Name of a test-control option */
       int ctrlCode;            /* Integer code for that option */
       int unSafe;              /* Not valid for --safe mode */
       const char *zUsage;      /* Usage notes */
    } aCtrl[] = {
      { "always",             SQLITE_TESTCTRL_ALWAYS, 1,     "BOOLEAN"         },

    /* The argument can optionally begin with "-" or "--" */
    if( zCmd[0]=='-' && zCmd[1] ){
      zCmd++;
      if( zCmd[0]=='-' && zCmd[1] ) zCmd++;
    }

    /* --help lists all test-controls */
    if( cli_strcmp(zCmd,"help")==0 ){
      utf8_printf(p->out, "Available test-controls:\n");
      for(i=0; i<ArraySize(aCtrl); i++){
        utf8_printf(p->out, "  .testctrl %s %s\n",
                    aCtrl[i].zCtrlName, aCtrl[i].zUsage);
      }
      rc = 1;
      goto meta_command_exit;
    }

    /* convert testctrl text option to value. allow any unique prefix
    ** of the option name, or a numerical value. */
    n2 = strlen30(zCmd);
    for(i=0; i<ArraySize(aCtrl); i++){
      if( cli_strncmp(zCmd, aCtrl[i].zCtrlName, n2)==0 ){
        if( testctrl<0 ){
          testctrl = aCtrl[i].ctrlCode;
          iCtrl = i;
        }else{
          utf8_printf(stderr, "Error: ambiguous test-control: \"%s\"\n"
                              "Use \".testctrl --help\" for help\n", zCmd);
          rc = 1;

          break;

        /* sqlite3_test_control(int, int, sqlite3*) */
        case SQLITE_TESTCTRL_PRNG_SEED:
          if( nArg==3 || nArg==4 ){
            int ii = (int)integerValue(azArg[2]);
            sqlite3 *db;
            if( ii==0 && cli_strcmp(azArg[2],"random")==0 ){
              sqlite3_randomness(sizeof(ii),&ii);
              printf("-- random seed: %d\n", ii);
            }
            if( nArg==3 ){
              db = 0;
            }else{
              db = p->db;

      raw_printf(p->out, "%d\n", rc2);
    }else if( isOk==2 ){
      raw_printf(p->out, "0x%08x\n", rc2);
    }
  }else
#endif /* !defined(SQLITE_UNTESTABLE) */

  if( c=='t' && n>4 && cli_strncmp(azArg[0], "timeout", n)==0 ){
    open_db(p, 0);
    sqlite3_busy_timeout(p->db, nArg>=2 ? (int)integerValue(azArg[1]) : 0);
  }else

  if( c=='t' && n>=5 && cli_strncmp(azArg[0], "timer", n)==0 ){
    if( nArg==2 ){
      enableTimer = booleanValue(azArg[1]);
      if( enableTimer && !HAS_TIMER ){
        raw_printf(stderr, "Error: timer not available on this system.\n");
        enableTimer = 0;
      }
    }else{
      raw_printf(stderr, "Usage: .timer on|off\n");
      rc = 1;
    }
  }else

#ifndef SQLITE_OMIT_TRACE
  if( c=='t' && cli_strncmp(azArg[0], "trace", n)==0 ){
    int mType = 0;
    int jj;
    open_db(p, 0);
    for(jj=1; jj<nArg; jj++){
      const char *z = azArg[jj];
      if( z[0]=='-' ){
        if( optionMatch(z, "expanded") ){

      if( mType==0 ) mType = SQLITE_TRACE_STMT;
      sqlite3_trace_v2(p->db, mType, sql_trace_callback, p);
    }
  }else
#endif /* !defined(SQLITE_OMIT_TRACE) */

#if defined(SQLITE_DEBUG) && !defined(SQLITE_OMIT_VIRTUALTABLE)
  if( c=='u' && cli_strncmp(azArg[0], "unmodule", n)==0 ){
    int ii;
    int lenOpt;
    char *zOpt;
    if( nArg<2 ){
      raw_printf(stderr, "Usage: .unmodule [--allexcept] NAME ...\n");
      rc = 1;
      goto meta_command_exit;
    }
    open_db(p, 0);
    zOpt = azArg[1];
    if( zOpt[0]=='-' && zOpt[1]=='-' && zOpt[2]!=0 ) zOpt++;
    lenOpt = (int)strlen(zOpt);
    if( lenOpt>=3 && cli_strncmp(zOpt, "-allexcept",lenOpt)==0 ){
      assert( azArg[nArg]==0 );
      sqlite3_drop_modules(p->db, nArg>2 ? (const char**)(azArg+2) : 0);
    }else{
      for(ii=1; ii<nArg; ii++){
        sqlite3_create_module(p->db, azArg[ii], 0, 0);
      }
    }
  }else
#endif

#if SQLITE_USER_AUTHENTICATION
  if( c=='u' && cli_strncmp(azArg[0], "user", n)==0 ){
    if( nArg<2 ){
      raw_printf(stderr, "Usage: .user SUBCOMMAND ...\n");
      rc = 1;
      goto meta_command_exit;
    }
    open_db(p, 0);
    if( cli_strcmp(azArg[1],"login")==0 ){
      if( nArg!=4 ){
        raw_printf(stderr, "Usage: .user login USER PASSWORD\n");
        rc = 1;
        goto meta_command_exit;
      }
      rc = sqlite3_user_authenticate(p->db, azArg[2], azArg[3],
                                     strlen30(azArg[3]));
      if( rc ){
        utf8_printf(stderr, "Authentication failed for user %s\n", azArg[2]);
        rc = 1;
      }
    }else if( cli_strcmp(azArg[1],"add")==0 ){
      if( nArg!=5 ){
        raw_printf(stderr, "Usage: .user add USER PASSWORD ISADMIN\n");
        rc = 1;
        goto meta_command_exit;
      }
      rc = sqlite3_user_add(p->db, azArg[2], azArg[3], strlen30(azArg[3]),
                            booleanValue(azArg[4]));
      if( rc ){
        raw_printf(stderr, "User-Add failed: %d\n", rc);
        rc = 1;
      }
    }else if( cli_strcmp(azArg[1],"edit")==0 ){
      if( nArg!=5 ){
        raw_printf(stderr, "Usage: .user edit USER PASSWORD ISADMIN\n");
        rc = 1;
        goto meta_command_exit;
      }
      rc = sqlite3_user_change(p->db, azArg[2], azArg[3], strlen30(azArg[3]),
                              booleanValue(azArg[4]));
      if( rc ){
        raw_printf(stderr, "User-Edit failed: %d\n", rc);
        rc = 1;
      }
    }else if( cli_strcmp(azArg[1],"delete")==0 ){
      if( nArg!=3 ){
        raw_printf(stderr, "Usage: .user delete USER\n");
        rc = 1;
        goto meta_command_exit;
      }
      rc = sqlite3_user_delete(p->db, azArg[2]);
      if( rc ){
        raw_printf(stderr, "User-Delete failed: %d\n", rc);
        rc = 1;
      }
    }else{
      raw_printf(stderr, "Usage: .user login|add|edit|delete ...\n");
      rc = 1;
      goto meta_command_exit;
    }
  }else
#endif /* SQLITE_USER_AUTHENTICATION */

  if( c=='v' && cli_strncmp(azArg[0], "version", n)==0 ){
    utf8_printf(p->out, "SQLite %s %s\n" /*extra-version-info*/,
        sqlite3_libversion(), sqlite3_sourceid());
#if SQLITE_HAVE_ZLIB
    utf8_printf(p->out, "zlib version %s\n", zlibVersion());
#endif
#define CTIMEOPT_VAL_(opt) #opt
#define CTIMEOPT_VAL(opt) CTIMEOPT_VAL_(opt)
#if defined(__clang__) && defined(__clang_major__)
    utf8_printf(p->out, "clang-" CTIMEOPT_VAL(__clang_major__) "."
                    CTIMEOPT_VAL(__clang_minor__) "."
                    CTIMEOPT_VAL(__clang_patchlevel__) "\n");
#elif defined(_MSC_VER)
    utf8_printf(p->out, "msvc-" CTIMEOPT_VAL(_MSC_VER) "\n");
#elif defined(__GNUC__) && defined(__VERSION__)
    utf8_printf(p->out, "gcc-" __VERSION__ "\n");
#endif
  }else

  if( c=='v' && cli_strncmp(azArg[0], "vfsinfo", n)==0 ){
    const char *zDbName = nArg==2 ? azArg[1] : "main";
    sqlite3_vfs *pVfs = 0;
    if( p->db ){
      sqlite3_file_control(p->db, zDbName, SQLITE_FCNTL_VFS_POINTER, &pVfs);
      if( pVfs ){
        utf8_printf(p->out, "vfs.zName      = \"%s\"\n", pVfs->zName);
        raw_printf(p->out, "vfs.iVersion   = %d\n", pVfs->iVersion);
        raw_printf(p->out, "vfs.szOsFile   = %d\n", pVfs->szOsFile);
        raw_printf(p->out, "vfs.mxPathname = %d\n", pVfs->mxPathname);
      }
    }
  }else

  if( c=='v' && cli_strncmp(azArg[0], "vfslist", n)==0 ){
    sqlite3_vfs *pVfs;
    sqlite3_vfs *pCurrent = 0;
    if( p->db ){
      sqlite3_file_control(p->db, "main", SQLITE_FCNTL_VFS_POINTER, &pCurrent);
    }
    for(pVfs=sqlite3_vfs_find(0); pVfs; pVfs=pVfs->pNext){
      utf8_printf(p->out, "vfs.zName      = \"%s\"%s\n", pVfs->zName,
           pVfs==pCurrent ? "  <--- CURRENT" : "");
      raw_printf(p->out, "vfs.iVersion   = %d\n", pVfs->iVersion);
      raw_printf(p->out, "vfs.szOsFile   = %d\n", pVfs->szOsFile);
      raw_printf(p->out, "vfs.mxPathname = %d\n", pVfs->mxPathname);
      if( pVfs->pNext ){
        raw_printf(p->out, "-----------------------------------\n");
      }
    }
  }else

  if( c=='v' && cli_strncmp(azArg[0], "vfsname", n)==0 ){
    const char *zDbName = nArg==2 ? azArg[1] : "main";
    char *zVfsName = 0;
    if( p->db ){
      sqlite3_file_control(p->db, zDbName, SQLITE_FCNTL_VFSNAME, &zVfsName);
      if( zVfsName ){
        utf8_printf(p->out, "%s\n", zVfsName);
        sqlite3_free(zVfsName);
      }
    }
  }else

  if( c=='w' && cli_strncmp(azArg[0], "wheretrace", n)==0 ){
    unsigned int x = nArg>=2 ? (unsigned int)integerValue(azArg[1]) : 0xffffffff;
    sqlite3_test_control(SQLITE_TESTCTRL_TRACEFLAGS, 3, &x);
  }else

  if( c=='w' && cli_strncmp(azArg[0], "width", n)==0 ){
    int j;
    assert( nArg<=ArraySize(azArg) );
    p->nWidth = nArg-1;
    p->colWidth = realloc(p->colWidth, (p->nWidth+1)*sizeof(int)*2);
    if( p->colWidth==0 && p->nWidth>0 ) shell_out_of_memory();
    if( p->nWidth ) p->actualWidth = &p->colWidth[p->nWidth];
    for(j=1; j<nArg; j++){

  if( rc || zErrMsg ){
    char zPrefix[100];
    const char *zErrorTail;
    const char *zErrorType;
    if( zErrMsg==0 ){
      zErrorType = "Error";
      zErrorTail = sqlite3_errmsg(p->db);
    }else if( cli_strncmp(zErrMsg, "in prepare, ",12)==0 ){
      zErrorType = "Parse error";
      zErrorTail = &zErrMsg[12];
    }else if( cli_strncmp(zErrMsg, "stepping, ", 10)==0 ){
      zErrorType = "Runtime error";
      zErrorTail = &zErrMsg[10];
    }else{
      zErrorType = "Error";
      zErrorTail = zErrMsg;
    }
    if( in!=0 || !stdin_is_interactive ){

  return 0;
}

static void echo_group_input(ShellState *p, const char *zDo){
  if( ShellHasFlag(p, SHFLG_Echo) ) utf8_printf(p->out, "%s\n", zDo);
}

#ifdef SQLITE_SHELL_FIDDLE
/*
** Alternate one_input_line() impl for wasm mode. This is not in the primary impl
** because we need the global shellState and cannot access it from that function
** without moving lots of code around (creating a larger/messier diff).
*/
static char *one_input_line(FILE *in, char *zPrior, int isContinuation){
  /* Parse the next line from shellState.wasm.zInput. */
  const char *zBegin = shellState.wasm.zPos;
  const char *z = zBegin;
  char *zLine = 0;
  i64 nZ = 0;

  UNUSED_PARAMETER(in);
  UNUSED_PARAMETER(isContinuation);
  if(!z || !*z){
    return 0;
  }
  while(*z && isspace(*z)) ++z;
  zBegin = z;
  for(; *z && '\n'!=*z; ++nZ, ++z){}
  if(nZ>0 && '\r'==zBegin[nZ-1]){
    --nZ;
  }
  shellState.wasm.zPos = z;
  zLine = realloc(zPrior, nZ+1);
  shell_check_oom(zLine);
  memcpy(zLine, zBegin, nZ);
  zLine[nZ] = 0;
  return zLine;
}
#endif /* SQLITE_SHELL_FIDDLE */

/*
** Read input from *in and process it.  If *in==0 then input
** is interactive - the user is typing it it.  Otherwise, input
** is coming from a file or device.  A prompt is issued and history
** is saved only if input is interactive.  An interrupt signal will
** cause this routine to exit immediately, unless input is interactive.
**
** Return the number of errors.
*/
static int process_input(ShellState *p){
  char *zLine = 0;          /* A single input line */
  char *zSql = 0;           /* Accumulated SQL text */
  i64 nLine;                /* Length of current line */
  i64 nSql = 0;             /* Bytes of zSql[] used */
  i64 nAlloc = 0;           /* Allocated zSql[] space */
  int rc;                   /* Error code */
  int errCnt = 0;           /* Number of errors seen */
  i64 startline = 0;        /* Line number for start of current input */
  QuickScanState qss = QSS_Start; /* Accumulated line status (so far) */

  if( p->inputNesting==MAX_INPUT_NESTING ){
    /* This will be more informative in a later version. */
    utf8_printf(stderr,"Input nesting limit (%d) reached at line %d."
                " Check recursion.\n", MAX_INPUT_NESTING, p->lineno);
    return 1;

          errCnt++;
        }
      }
      qss = QSS_Start;
      continue;
    }
    /* No single-line dispositions remain; accumulate line(s). */
    nLine = strlen(zLine);
    if( nSql+nLine+2>=nAlloc ){
      /* Grow buffer by half-again increments when big. */
      nAlloc = nSql+(nSql>>1)+nLine+100;
      zSql = realloc(zSql, nAlloc);
      shell_check_oom(zSql);
    }
    if( nSql==0 ){
      i64 i;
      for(i=0; zLine[i] && IsSpace(zLine[i]); i++){}
      assert( nAlloc>0 && zSql!=0 );
      memcpy(zSql, zLine+i, nLine+1-i);
      startline = p->lineno;
      nSql = nLine-i;
    }else{
      zSql[nSql++] = '\n';

    home_dir = "c:\\";
  }
#endif

#endif /* !_WIN32_WCE */

  if( home_dir ){
    i64 n = strlen(home_dir) + 1;
    char *z = malloc( n );
    if( z ) memcpy(z, home_dir, n);
    home_dir = z;
  }

  return home_dir;
}

   && (defined(_MSC_VER) || (defined(UNICODE) && defined(__GNUC__)))
#    define SQLITE_SHELL_IS_UTF8          (0)
#  else
#    define SQLITE_SHELL_IS_UTF8          (1)
#  endif
#endif

#ifdef SQLITE_SHELL_FIDDLE
#  define main fiddle_main
#endif

#if SQLITE_SHELL_IS_UTF8
int SQLITE_CDECL main(int argc, char **argv){
#else
int SQLITE_CDECL wmain(int argc, wchar_t **wargv){
  char **argv;
#endif
#ifdef SQLITE_DEBUG
  sqlite3_int64 mem_main_enter = sqlite3_memory_used();
#endif
  char *zErrMsg = 0;
#ifdef SQLITE_SHELL_FIDDLE
#  define data shellState
#else
  ShellState data;
#endif
  const char *zInitFile = 0;
  int i;
  int rc = 0;
  int warnInmemoryDb = 0;
  int readStdin = 1;
  int nCmd = 0;
  char **azCmd = 0;
  const char *zVfs = 0;           /* Value of -vfs command-line option */
#if !SQLITE_SHELL_IS_UTF8
  char **argvToFree = 0;
  int argcToFree = 0;
#endif

  setBinaryMode(stdin, 0);
  setvbuf(stderr, 0, _IONBF, 0); /* Make sure stderr is unbuffered */
#ifdef SQLITE_SHELL_FIDDLE
  stdin_is_interactive = 0;
  stdout_is_console = 1;
  data.wasm.zDefaultDbName = "/fiddle.sqlite3";
#else
  stdin_is_interactive = isatty(0);
  stdout_is_console = isatty(1);
#endif

#if !defined(_WIN32_WCE)
  if( getenv("SQLITE_DEBUG_BREAK") ){

      raise(SIGTRAP);
#endif
    }
  }
#endif

#if USE_SYSTEM_SQLITE+0!=1
  if( cli_strncmp(sqlite3_sourceid(),SQLITE_SOURCE_ID,60)!=0 ){
    utf8_printf(stderr, "SQLite header and source version mismatch\n%s\n%s\n",
            sqlite3_sourceid(), SQLITE_SOURCE_ID);
    exit(1);
  }
#endif
  main_init(&data);

  sqlite3_initialize();
  argvToFree = malloc(sizeof(argv[0])*argc*2);
  shell_check_oom(argvToFree);
  argcToFree = argc;
  argv = argvToFree + argc;
  for(i=0; i<argc; i++){
    char *z = sqlite3_win32_unicode_to_utf8(wargv[i]);
    i64 n;
    shell_check_oom(z);
    n = strlen(z);
    argv[i] = malloc( n+1 );
    shell_check_oom(argv[i]);
    memcpy(argv[i], z, n+1);
    argvToFree[i] = argv[i];
    sqlite3_free(z);
  }
  sqlite3_shutdown();

        nCmd++;
        azCmd = realloc(azCmd, sizeof(azCmd[0])*nCmd);
        shell_check_oom(azCmd);
        azCmd[nCmd-1] = z;
      }
    }
    if( z[1]=='-' ) z++;
    if( cli_strcmp(z,"-separator")==0
     || cli_strcmp(z,"-nullvalue")==0
     || cli_strcmp(z,"-newline")==0
     || cli_strcmp(z,"-cmd")==0
    ){
      (void)cmdline_option_value(argc, argv, ++i);
    }else if( cli_strcmp(z,"-init")==0 ){
      zInitFile = cmdline_option_value(argc, argv, ++i);
    }else if( cli_strcmp(z,"-batch")==0 ){
      /* Need to check for batch mode here to so we can avoid printing
      ** informational messages (like from process_sqliterc) before
      ** we do the actual processing of arguments later in a second pass.
      */
      stdin_is_interactive = 0;
    }else if( cli_strcmp(z,"-heap")==0 ){
#if defined(SQLITE_ENABLE_MEMSYS3) || defined(SQLITE_ENABLE_MEMSYS5)
      const char *zSize;
      sqlite3_int64 szHeap;

      zSize = cmdline_option_value(argc, argv, ++i);
      szHeap = integerValue(zSize);
      if( szHeap>0x7fff0000 ) szHeap = 0x7fff0000;
      sqlite3_config(SQLITE_CONFIG_HEAP, malloc((int)szHeap), (int)szHeap, 64);
#else
      (void)cmdline_option_value(argc, argv, ++i);
#endif
    }else if( cli_strcmp(z,"-pagecache")==0 ){
      sqlite3_int64 n, sz;
      sz = integerValue(cmdline_option_value(argc,argv,++i));
      if( sz>70000 ) sz = 70000;
      if( sz<0 ) sz = 0;
      n = integerValue(cmdline_option_value(argc,argv,++i));
      if( sz>0 && n>0 && 0xffffffffffffLL/sz<n ){
        n = 0xffffffffffffLL/sz;
      }
      sqlite3_config(SQLITE_CONFIG_PAGECACHE,
                    (n>0 && sz>0) ? malloc(n*sz) : 0, sz, n);
      data.shellFlgs |= SHFLG_Pagecache;
    }else if( cli_strcmp(z,"-lookaside")==0 ){
      int n, sz;
      sz = (int)integerValue(cmdline_option_value(argc,argv,++i));
      if( sz<0 ) sz = 0;
      n = (int)integerValue(cmdline_option_value(argc,argv,++i));
      if( n<0 ) n = 0;
      sqlite3_config(SQLITE_CONFIG_LOOKASIDE, sz, n);
      if( sz*n==0 ) data.shellFlgs &= ~SHFLG_Lookaside;
    }else if( cli_strcmp(z,"-threadsafe")==0 ){
      int n;
      n = (int)integerValue(cmdline_option_value(argc,argv,++i));
      switch( n ){
         case 0:  sqlite3_config(SQLITE_CONFIG_SINGLETHREAD);  break;
         case 2:  sqlite3_config(SQLITE_CONFIG_MULTITHREAD);   break;
         default: sqlite3_config(SQLITE_CONFIG_SERIALIZED);    break;
      }
#ifdef SQLITE_ENABLE_VFSTRACE
    }else if( cli_strcmp(z,"-vfstrace")==0 ){
      extern int vfstrace_register(
         const char *zTraceName,
         const char *zOldVfsName,
         int (*xOut)(const char*,void*),
         void *pOutArg,
         int makeDefault
      );
      vfstrace_register("trace",0,(int(*)(const char*,void*))fputs,stderr,1);
#endif
#ifdef SQLITE_ENABLE_MULTIPLEX
    }else if( cli_strcmp(z,"-multiplex")==0 ){
      extern int sqlite3_multiple_initialize(const char*,int);
      sqlite3_multiplex_initialize(0, 1);
#endif
    }else if( cli_strcmp(z,"-mmap")==0 ){
      sqlite3_int64 sz = integerValue(cmdline_option_value(argc,argv,++i));
      sqlite3_config(SQLITE_CONFIG_MMAP_SIZE, sz, sz);
#ifdef SQLITE_ENABLE_SORTER_REFERENCES
    }else if( cli_strcmp(z,"-sorterref")==0 ){
      sqlite3_int64 sz = integerValue(cmdline_option_value(argc,argv,++i));
      sqlite3_config(SQLITE_CONFIG_SORTERREF_SIZE, (int)sz);
#endif
    }else if( cli_strcmp(z,"-vfs")==0 ){
      zVfs = cmdline_option_value(argc, argv, ++i);
#ifdef SQLITE_HAVE_ZLIB
    }else if( cli_strcmp(z,"-zip")==0 ){
      data.openMode = SHELL_OPEN_ZIPFILE;
#endif
    }else if( cli_strcmp(z,"-append")==0 ){
      data.openMode = SHELL_OPEN_APPENDVFS;
#ifndef SQLITE_OMIT_DESERIALIZE
    }else if( cli_strcmp(z,"-deserialize")==0 ){
      data.openMode = SHELL_OPEN_DESERIALIZE;
    }else if( cli_strcmp(z,"-maxsize")==0 && i+1<argc ){
      data.szMax = integerValue(argv[++i]);
#endif
    }else if( cli_strcmp(z,"-readonly")==0 ){
      data.openMode = SHELL_OPEN_READONLY;
    }else if( cli_strcmp(z,"-nofollow")==0 ){
      data.openFlags = SQLITE_OPEN_NOFOLLOW;
#if !defined(SQLITE_OMIT_VIRTUALTABLE) && defined(SQLITE_HAVE_ZLIB)
    }else if( cli_strncmp(z, "-A",2)==0 ){
      /* All remaining command-line arguments are passed to the ".archive"
      ** command, so ignore them */
      break;
#endif
    }else if( cli_strcmp(z, "-memtrace")==0 ){
      sqlite3MemTraceActivate(stderr);
    }else if( cli_strcmp(z,"-bail")==0 ){
      bail_on_error = 1;
    }else if( cli_strcmp(z,"-nonce")==0 ){
      free(data.zNonce);
      data.zNonce = strdup(argv[++i]);
    }else if( cli_strcmp(z,"-safe")==0 ){
      /* no-op - catch this on the second pass */
    }
  }
  verify_uninitialized();


#ifdef SQLITE_SHELL_INIT_PROC

    warnInmemoryDb = argc==1;
#else
    utf8_printf(stderr,"%s: Error: no database filename specified\n", Argv0);
    return 1;
#endif
  }
  data.out = stdout;
#ifndef SQLITE_SHELL_FIDDLE
  sqlite3_appendvfs_init(0,0,0);
#endif

  /* Go ahead and open the database file if it already exists.  If the
  ** file does not exist, delay opening it.  This prevents empty database
  ** files from being created if a user mistypes the database name argument
  ** to the sqlite command-line tool.

  ** file is processed so that the command-line arguments will override
  ** settings in the initialization file.
  */
  for(i=1; i<argc; i++){
    char *z = argv[i];
    if( z[0]!='-' ) continue;
    if( z[1]=='-' ){ z++; }
    if( cli_strcmp(z,"-init")==0 ){
      i++;
    }else if( cli_strcmp(z,"-html")==0 ){
      data.mode = MODE_Html;
    }else if( cli_strcmp(z,"-list")==0 ){
      data.mode = MODE_List;
    }else if( cli_strcmp(z,"-quote")==0 ){
      data.mode = MODE_Quote;
      sqlite3_snprintf(sizeof(data.colSeparator), data.colSeparator, SEP_Comma);
      sqlite3_snprintf(sizeof(data.rowSeparator), data.rowSeparator, SEP_Row);
    }else if( cli_strcmp(z,"-line")==0 ){
      data.mode = MODE_Line;
    }else if( cli_strcmp(z,"-column")==0 ){
      data.mode = MODE_Column;
    }else if( cli_strcmp(z,"-json")==0 ){
      data.mode = MODE_Json;
    }else if( cli_strcmp(z,"-markdown")==0 ){
      data.mode = MODE_Markdown;
    }else if( cli_strcmp(z,"-table")==0 ){
      data.mode = MODE_Table;
    }else if( cli_strcmp(z,"-box")==0 ){
      data.mode = MODE_Box;
    }else if( cli_strcmp(z,"-csv")==0 ){
      data.mode = MODE_Csv;
      memcpy(data.colSeparator,",",2);
#ifdef SQLITE_HAVE_ZLIB
    }else if( cli_strcmp(z,"-zip")==0 ){
      data.openMode = SHELL_OPEN_ZIPFILE;
#endif
    }else if( cli_strcmp(z,"-append")==0 ){
      data.openMode = SHELL_OPEN_APPENDVFS;
#ifndef SQLITE_OMIT_DESERIALIZE
    }else if( cli_strcmp(z,"-deserialize")==0 ){
      data.openMode = SHELL_OPEN_DESERIALIZE;
    }else if( cli_strcmp(z,"-maxsize")==0 && i+1<argc ){
      data.szMax = integerValue(argv[++i]);
#endif
    }else if( cli_strcmp(z,"-readonly")==0 ){
      data.openMode = SHELL_OPEN_READONLY;
    }else if( cli_strcmp(z,"-nofollow")==0 ){
      data.openFlags |= SQLITE_OPEN_NOFOLLOW;
    }else if( cli_strcmp(z,"-ascii")==0 ){
      data.mode = MODE_Ascii;
      sqlite3_snprintf(sizeof(data.colSeparator), data.colSeparator, SEP_Unit);
      sqlite3_snprintf(sizeof(data.rowSeparator), data.rowSeparator, SEP_Record);
    }else if( cli_strcmp(z,"-tabs")==0 ){
      data.mode = MODE_List;
      sqlite3_snprintf(sizeof(data.colSeparator), data.colSeparator, SEP_Tab);
      sqlite3_snprintf(sizeof(data.rowSeparator), data.rowSeparator, SEP_Row);
    }else if( cli_strcmp(z,"-separator")==0 ){
      sqlite3_snprintf(sizeof(data.colSeparator), data.colSeparator,
                       "%s",cmdline_option_value(argc,argv,++i));
    }else if( cli_strcmp(z,"-newline")==0 ){
      sqlite3_snprintf(sizeof(data.rowSeparator), data.rowSeparator,
                       "%s",cmdline_option_value(argc,argv,++i));
    }else if( cli_strcmp(z,"-nullvalue")==0 ){
      sqlite3_snprintf(sizeof(data.nullValue), data.nullValue,
                       "%s",cmdline_option_value(argc,argv,++i));
    }else if( cli_strcmp(z,"-header")==0 ){
      data.showHeader = 1;
      ShellSetFlag(&data, SHFLG_HeaderSet);
     }else if( cli_strcmp(z,"-noheader")==0 ){
      data.showHeader = 0;
      ShellSetFlag(&data, SHFLG_HeaderSet);
    }else if( cli_strcmp(z,"-echo")==0 ){
      ShellSetFlag(&data, SHFLG_Echo);
    }else if( cli_strcmp(z,"-eqp")==0 ){
      data.autoEQP = AUTOEQP_on;
    }else if( cli_strcmp(z,"-eqpfull")==0 ){
      data.autoEQP = AUTOEQP_full;
    }else if( cli_strcmp(z,"-stats")==0 ){
      data.statsOn = 1;
    }else if( cli_strcmp(z,"-scanstats")==0 ){
      data.scanstatsOn = 1;
    }else if( cli_strcmp(z,"-backslash")==0 ){
      /* Undocumented command-line option: -backslash
      ** Causes C-style backslash escapes to be evaluated in SQL statements
      ** prior to sending the SQL into SQLite.  Useful for injecting
      ** crazy bytes in the middle of SQL statements for testing and debugging.
      */
      ShellSetFlag(&data, SHFLG_Backslash);
    }else if( cli_strcmp(z,"-bail")==0 ){
      /* No-op.  The bail_on_error flag should already be set. */
    }else if( cli_strcmp(z,"-version")==0 ){
      printf("%s %s\n", sqlite3_libversion(), sqlite3_sourceid());
      return 0;
    }else if( cli_strcmp(z,"-interactive")==0 ){
      stdin_is_interactive = 1;
    }else if( cli_strcmp(z,"-batch")==0 ){
      stdin_is_interactive = 0;
    }else if( cli_strcmp(z,"-heap")==0 ){
      i++;
    }else if( cli_strcmp(z,"-pagecache")==0 ){
      i+=2;
    }else if( cli_strcmp(z,"-lookaside")==0 ){
      i+=2;
    }else if( cli_strcmp(z,"-threadsafe")==0 ){
      i+=2;
    }else if( cli_strcmp(z,"-nonce")==0 ){
      i += 2;
    }else if( cli_strcmp(z,"-mmap")==0 ){
      i++;
    }else if( cli_strcmp(z,"-memtrace")==0 ){
      i++;
#ifdef SQLITE_ENABLE_SORTER_REFERENCES
    }else if( cli_strcmp(z,"-sorterref")==0 ){
      i++;
#endif
    }else if( cli_strcmp(z,"-vfs")==0 ){
      i++;
#ifdef SQLITE_ENABLE_VFSTRACE
    }else if( cli_strcmp(z,"-vfstrace")==0 ){
      i++;
#endif
#ifdef SQLITE_ENABLE_MULTIPLEX
    }else if( cli_strcmp(z,"-multiplex")==0 ){
      i++;
#endif
    }else if( cli_strcmp(z,"-help")==0 ){
      usage(1);
    }else if( cli_strcmp(z,"-cmd")==0 ){
      /* Run commands that follow -cmd first and separately from commands
      ** that simply appear on the command-line.  This seems goofy.  It would
      ** be better if all commands ran in the order that they appear.  But
      ** we retain the goofy behavior for historical compatibility. */
      if( i==argc-1 ) break;
      z = cmdline_option_value(argc,argv,++i);
      if( z[0]=='.' ){

          if( bail_on_error ) return rc!=0 ? rc : 1;
        }else if( rc!=0 ){
          utf8_printf(stderr,"Error: unable to process SQL \"%s\"\n", z);
          if( bail_on_error ) return rc;
        }
      }
#if !defined(SQLITE_OMIT_VIRTUALTABLE) && defined(SQLITE_HAVE_ZLIB)
    }else if( cli_strncmp(z, "-A", 2)==0 ){
      if( nCmd>0 ){
        utf8_printf(stderr, "Error: cannot mix regular SQL or dot-commands"
                            " with \"%s\"\n", z);
        return 1;
      }
      open_db(&data, OPEN_DB_ZIPFILE);
      if( z[2] ){
        argv[i] = &z[2];
        arDotCommand(&data, 1, argv+(i-1), argc-(i-1));
      }else{
        arDotCommand(&data, 1, argv+i, argc-i);
      }
      readStdin = 0;
      break;
#endif
    }else if( cli_strcmp(z,"-safe")==0 ){
      data.bSafeMode = data.bSafeModePersist = 1;
    }else{
      utf8_printf(stderr,"%s: Error: unknown option: %s\n", Argv0, z);
      raw_printf(stderr,"Use -help for a list of options.\n");
      return 1;
    }
    data.cMode = data.mode;

        free(zHistory);
      }
    }else{
      data.in = stdin;
      rc = process_input(&data);
    }
  }
#ifndef SQLITE_SHELL_FIDDLE
  /* In WASM mode we have to leave the db state in place so that
  ** client code can "push" SQL into it after this call returns. */
  free(azCmd);
  set_table_name(&data, 0);
  if( data.db ){
    session_close_all(&data, -1);
    close_db(data.db);

  memset(&data, 0, sizeof(data));
#ifdef SQLITE_DEBUG
  if( sqlite3_memory_used()>mem_main_enter ){
    utf8_printf(stderr, "Memory leaked: %u bytes\n",
                (unsigned int)(sqlite3_memory_used()-mem_main_enter));
  }
#endif
#endif /* !SQLITE_SHELL_FIDDLE */
  return rc;
}


#ifdef SQLITE_SHELL_FIDDLE
/* Only for emcc experimentation purposes. */
int fiddle_experiment(int a,int b){
  return a + b;
}

/*
** Returns a pointer to the current DB handle.

*/

sqlite3 * fiddle_db_handle(){

  return globalDb;
}





/*
** Returns a pointer to the given DB name's VFS. If zDbName is 0 then
** "main" is assumed. Returns 0 if no db with the given name is
** open.
*/
sqlite3_vfs * fiddle_db_vfs(const char *zDbName){

  sqlite3_vfs * pVfs = 0;

  if(globalDb){
    sqlite3_file_control(globalDb, zDbName ? zDbName : "main",
                         SQLITE_FCNTL_VFS_POINTER, &pVfs);
  }
  return pVfs;
}

/* Only for emcc experimentation purposes. */
sqlite3 * fiddle_db_arg(sqlite3 *arg){
    printf("fiddle_db_arg(%p)\n", (const void*)arg);
    return arg;
}

/*
** Intended to be called via a SharedWorker() while a separate
** SharedWorker() (which manages the wasm module) is performing work
** which should be interrupted. Unfortunately, SharedWorker is not
** portable enough to make real use of.
*/
void fiddle_interrupt(void){
  if( globalDb ) sqlite3_interrupt(globalDb);
}

/*
** Returns the filename of the given db name, assuming "main" if
** zDbName is NULL. Returns NULL if globalDb is not opened.
*/
const char * fiddle_db_filename(const char * zDbName){
    return globalDb
      ? sqlite3_db_filename(globalDb, zDbName ? zDbName : "main")
      : NULL;
}

/*


** Completely wipes out the contents of the currently-opened database

** but leaves its storage intact for reuse.
*/
void fiddle_reset_db(void){

  if( globalDb ){
    int rc = sqlite3_db_config(globalDb, SQLITE_DBCONFIG_RESET_DATABASE, 1, 0);
    if( 0==rc ) rc = sqlite3_exec(globalDb, "VACUUM", 0, 0, 0);
    sqlite3_db_config(globalDb, SQLITE_DBCONFIG_RESET_DATABASE, 0, 0);
  }
}

/*
** Uses the current database's VFS xRead to stream the db file's
** contents out to the given callback. The callback gets a single
** chunk of size n (its 2nd argument) on each call and must return 0
** on success, non-0 on error. This function returns 0 on success,
** SQLITE_NOTFOUND if no db is open, or propagates any other non-0
** code from the callback. Note that this is not thread-friendly: it
** expects that it will be the only thread reading the db file and
** takes no measures to ensure that is the case.
*/
int fiddle_export_db( int (*xCallback)(unsigned const char *zOut, int n) ){
  sqlite3_int64 nSize = 0;
  sqlite3_int64 nPos = 0;
  sqlite3_file * pFile = 0;


  unsigned char buf[1024 * 8];
  int nBuf = (int)sizeof(buf);
  int rc = shellState.db
    ? sqlite3_file_control(shellState.db, "main",
                           SQLITE_FCNTL_FILE_POINTER, &pFile)
    : SQLITE_NOTFOUND;
  if( rc ) return rc;
  rc = pFile->pMethods->xFileSize(pFile, &nSize);
  if( rc ) return rc;
  if(nSize % nBuf){
    /* DB size is not an even multiple of the buffer size. Reduce
    ** buffer size so that we do not unduly inflate the db size when
    ** exporting. */
    if(0 == nSize % 4096) nBuf = 4096;
    else if(0 == nSize % 2048) nBuf = 2048;
    else if(0 == nSize % 1024) nBuf = 1024;
    else nBuf = 512;
  }

  for( ; 0==rc && nPos<nSize; nPos += nBuf ){
    rc = pFile->pMethods->xRead(pFile, buf, nBuf, nPos);
    if(SQLITE_IOERR_SHORT_READ == rc){
      rc = (nPos + nBuf) < nSize ? rc : 0/*assume EOF*/;
    }
    if( 0==rc ) rc = xCallback(buf, nBuf);
  }
  return rc;
}

/*
** Trivial exportable function for emscripten. It processes zSql as if




** it were input to the sqlite3 shell and redirects all output to the
** wasm binding. fiddle_main() must have been called before this
** is called, or results are undefined.
*/
void fiddle_exec(const char * zSql){




























  if(zSql && *zSql){
    if('.'==*zSql) puts(zSql);
    shellState.wasm.zInput = zSql;
    shellState.wasm.zPos = zSql;
    process_input(&shellState);
    shellState.wasm.zInput = shellState.wasm.zPos = 0;
  }
}
#endif /* SQLITE_SHELL_FIDDLE */

/******************************************************************************
** This file is an amalgamation of many separate C source files from SQLite
** version 3.40.0.  By combining all the individual C code files into this
** single large file, the entire code can be compiled as a single translation
** unit.  This allows many compilers to do optimizations that would not be
** possible if the files were compiled separately.  Performance improvements
** of 5% or more are commonly seen when SQLite is compiled as a single
** translation unit.
**
** This file is all you need to compile SQLite.  To use SQLite in other

** been edited in any way since it was last checked in, then the last
** four hexadecimal digits of the hash may be modified.
**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.40.0"
#define SQLITE_VERSION_NUMBER 3040000
#define SQLITE_SOURCE_ID      "2022-10-26 11:11:31 3dfdfb3f12edb3f4267942598efd05d573e13b7c5d6cdbc3404373f41b8993dd"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros

#define SQLITE_IOCAP_BATCH_ATOMIC           0x00004000

/*
** CAPI3REF: File Locking Levels
**
** SQLite uses one of these integer values as the second
** argument to calls it makes to the xLock() and xUnlock() methods
** of an [sqlite3_io_methods] object.  These values are ordered from
** lest restrictive to most restrictive.
**
** The argument to xLock() is always SHARED or higher.  The argument to
** xUnlock is either SHARED or NONE.
*/
#define SQLITE_LOCK_NONE          0       /* xUnlock() only */
#define SQLITE_LOCK_SHARED        1       /* xLock() or xUnlock() */
#define SQLITE_LOCK_RESERVED      2       /* xLock() only */
#define SQLITE_LOCK_PENDING       3       /* xLock() only */
#define SQLITE_LOCK_EXCLUSIVE     4       /* xLock() only */

/*
** CAPI3REF: Synchronization Type Flags
**
** When SQLite invokes the xSync() method of an
** [sqlite3_io_methods] object it uses a combination of
** these integer values as the second argument.

** <ul>
** <li> [SQLITE_LOCK_NONE],
** <li> [SQLITE_LOCK_SHARED],
** <li> [SQLITE_LOCK_RESERVED],
** <li> [SQLITE_LOCK_PENDING], or
** <li> [SQLITE_LOCK_EXCLUSIVE].
** </ul>
** xLock() upgrades the database file lock.  In other words, xLock() moves the
** database file lock in the direction NONE toward EXCLUSIVE. The argument to
** xLock() is always on of SHARED, RESERVED, PENDING, or EXCLUSIVE, never
** SQLITE_LOCK_NONE.  If the database file lock is already at or above the
** requested lock, then the call to xLock() is a no-op.
** xUnlock() downgrades the database file lock to either SHARED or NONE.
*  If the lock is already at or below the requested lock state, then the call
** to xUnlock() is a no-op.
** The xCheckReservedLock() method checks whether any database connection,
** either in this process or in some other process, is holding a RESERVED,
** PENDING, or EXCLUSIVE lock on the file.  It returns true
** if such a lock exists and false otherwise.
**
** The xFileControl() method is a generic interface that allows custom
** VFS implementations to directly control an open file using the

**
** <ul>
** <li>[[SQLITE_FCNTL_LOCKSTATE]]
** The [SQLITE_FCNTL_LOCKSTATE] opcode is used for debugging.  This
** opcode causes the xFileControl method to write the current state of
** the lock (one of [SQLITE_LOCK_NONE], [SQLITE_LOCK_SHARED],
** [SQLITE_LOCK_RESERVED], [SQLITE_LOCK_PENDING], or [SQLITE_LOCK_EXCLUSIVE])
** into an integer that the pArg argument points to.
** This capability is only available if SQLite is compiled with [SQLITE_DEBUG].

**
** <li>[[SQLITE_FCNTL_SIZE_HINT]]
** The [SQLITE_FCNTL_SIZE_HINT] opcode is used by SQLite to give the VFS
** layer a hint of how large the database file will grow to be during the
** current transaction.  This hint is not guaranteed to be accurate but it
** is often close.  The underlying VFS might choose to preallocate database
** file space based on this hint in order to help writes to the database

** (Mutexes will block any actual concurrency, but in this mode
** there is no harm in trying.)
**
** ^(<dt>[SQLITE_OPEN_SHAREDCACHE]</dt>
** <dd>The database is opened [shared cache] enabled, overriding
** the default shared cache setting provided by
** [sqlite3_enable_shared_cache()].)^
** The [use of shared cache mode is discouraged] and hence shared cache
** capabilities may be omitted from many builds of SQLite.  In such cases,
** this option is a no-op.
**
** ^(<dt>[SQLITE_OPEN_PRIVATECACHE]</dt>
** <dd>The database is opened [shared cache] disabled, overriding
** the default shared cache setting provided by
** [sqlite3_enable_shared_cache()].)^
**
** [[OPEN_EXRESCODE]] ^(<dt>[SQLITE_OPEN_EXRESCODE]</dt>
** <dd>The database connection comes up in "extended result code mode".
** In other words, the database behaves has if
** [sqlite3_extended_result_codes(db,1)] where called on the database
** connection as soon as the connection is created. In addition to setting
** the extended result code mode, this flag also causes [sqlite3_open_v2()]
** to return an extended result code.</dd>
**
** [[OPEN_NOFOLLOW]] ^(<dt>[SQLITE_OPEN_NOFOLLOW]</dt>
** <dd>The database filename is not allowed to contain a symbolic link</dd>
** </dl>)^
**
** If the 3rd parameter to sqlite3_open_v2() is not one of the
** required combinations shown above optionally combined with other
** [SQLITE_OPEN_READONLY | SQLITE_OPEN_* bits]
** then the behavior is undefined.  Historic versions of SQLite
** have silently ignored surplus bits in the flags parameter to

** numeric affinity to the value.  This means that an attempt is
** made to convert the value to an integer or floating point.  If
** such a conversion is possible without loss of information (in other
** words, if the value is a string that looks like a number)
** then the conversion is performed.  Otherwise no conversion occurs.
** The [SQLITE_INTEGER | datatype] after conversion is returned.)^
**
** ^(The sqlite3_value_encoding(X) interface returns one of [SQLITE_UTF8],
** [SQLITE_UTF16BE], or [SQLITE_UTF16LE] according to the current encoding
** of the value X, assuming that X has type TEXT.)^  If sqlite3_value_type(X)
** returns something other than SQLITE_TEXT, then the return value from
** sqlite3_value_encoding(X) is meaningless.  ^Calls to
** sqlite3_value_text(X), sqlite3_value_text16(X), sqlite3_value_text16be(X),
** sqlite3_value_text16le(X), sqlite3_value_bytes(X), or
** sqlite3_value_bytes16(X) might change the encoding of the value X and
** thus change the return from subsequent calls to sqlite3_value_encoding(X).
**
** ^Within the [xUpdate] method of a [virtual table], the
** sqlite3_value_nochange(X) interface returns true if and only if
** the column corresponding to X is unchanged by the UPDATE operation
** that the xUpdate method call was invoked to implement and if
** and the prior [xColumn] method call that was invoked to extracted
** the value for that column returned without setting a result (probably
** because it queried [sqlite3_vtab_nochange()] and found that the column

SQLITE_API const void *sqlite3_value_text16be(sqlite3_value*);
SQLITE_API int sqlite3_value_bytes(sqlite3_value*);
SQLITE_API int sqlite3_value_bytes16(sqlite3_value*);
SQLITE_API int sqlite3_value_type(sqlite3_value*);
SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*);
SQLITE_API int sqlite3_value_nochange(sqlite3_value*);
SQLITE_API int sqlite3_value_frombind(sqlite3_value*);
SQLITE_API int sqlite3_value_encoding(sqlite3_value*);

/*
** CAPI3REF: Finding The Subtype Of SQL Values
** METHOD: sqlite3_value
**
** The sqlite3_value_subtype(V) function returns the subtype for
** an [application-defined SQL function] argument V.  The subtype

** an aggregate query, the xStep() callback of the aggregate function
** implementation is never called and xFinal() is called exactly once.
** In those cases, sqlite3_aggregate_context() might be called for the
** first time from within xFinal().)^
**
** ^The sqlite3_aggregate_context(C,N) routine returns a NULL pointer
** when first called if N is less than or equal to zero or if a memory
** allocation error occurs.
**
** ^(The amount of space allocated by sqlite3_aggregate_context(C,N) is
** determined by the N parameter on first successful call.  Changing the
** value of N in any subsequent call to sqlite3_aggregate_context() within
** the same aggregate function instance will not resize the memory
** allocation.)^  Within the xFinal callback, it is customary to set
** N=0 in calls to sqlite3_aggregate_context(C,N) so that no

** CAPI3REF: Autovacuum Compaction Amount Callback
** METHOD: sqlite3
**
** ^The sqlite3_autovacuum_pages(D,C,P,X) interface registers a callback
** function C that is invoked prior to each autovacuum of the database
** file.  ^The callback is passed a copy of the generic data pointer (P),
** the schema-name of the attached database that is being autovacuumed,
** the size of the database file in pages, the number of free pages,
** and the number of bytes per page, respectively.  The callback should
** return the number of free pages that should be removed by the
** autovacuum.  ^If the callback returns zero, then no autovacuum happens.
** ^If the value returned is greater than or equal to the number of
** free pages, then a complete autovacuum happens.
**
** <p>^If there are multiple ATTACH-ed database files that are being

/*
** CAPI3REF: Enable Or Disable Shared Pager Cache
**
** ^(This routine enables or disables the sharing of the database cache
** and schema data structures between [database connection | connections]
** to the same database. Sharing is enabled if the argument is true
** and disabled if the argument is false.)^
**
** This interface is omitted if SQLite is compiled with
** [-DSQLITE_OMIT_SHARED_CACHE].  The [-DSQLITE_OMIT_SHARED_CACHE]
** compile-time option is recommended because the
** [use of shared cache mode is discouraged].
**
** ^Cache sharing is enabled and disabled for an entire process.
** This is a change as of SQLite [version 3.5.0] ([dateof:3.5.0]).
** In prior versions of SQLite,
** sharing was enabled or disabled for each thread separately.
**
** ^(The cache sharing mode set by this interface effects all subsequent

** sqlite3_soft_heap_limit64(-1) or sqlite3_hard_heap_limit(-1).
**
** ^Setting the heap limits to zero disables the heap limiter mechanism.
**
** ^The soft heap limit may not be greater than the hard heap limit.
** ^If the hard heap limit is enabled and if sqlite3_soft_heap_limit(N)
** is invoked with a value of N that is greater than the hard heap limit,
** the soft heap limit is set to the value of the hard heap limit.
** ^The soft heap limit is automatically enabled whenever the hard heap
** limit is enabled. ^When sqlite3_hard_heap_limit64(N) is invoked and
** the soft heap limit is outside the range of 1..N, then the soft heap
** limit is set to N.  ^Invoking sqlite3_soft_heap_limit64(0) when the
** hard heap limit is enabled makes the soft heap limit equal to the
** hard heap limit.
**

** However, the application must guarantee that the destination
** [database connection] is not passed to any other API (by any thread) after
** sqlite3_backup_init() is called and before the corresponding call to
** sqlite3_backup_finish().  SQLite does not currently check to see
** if the application incorrectly accesses the destination [database connection]
** and so no error code is reported, but the operations may malfunction
** nevertheless.  Use of the destination database connection while a
** backup is in progress might also cause a mutex deadlock.
**
** If running in [shared cache mode], the application must
** guarantee that the shared cache used by the destination database
** is not accessed while the backup is running. In practice this means
** that the application must guarantee that the disk file being
** backed up to is not accessed by any connection within the process,
** not just the specific connection that was passed to sqlite3_backup_init().

** These constants define all valid values for the "checkpoint mode" passed
** as the third parameter to the [sqlite3_wal_checkpoint_v2()] interface.
** See the [sqlite3_wal_checkpoint_v2()] documentation for details on the
** meaning of each of these checkpoint modes.
*/
#define SQLITE_CHECKPOINT_PASSIVE  0  /* Do as much as possible w/o blocking */
#define SQLITE_CHECKPOINT_FULL     1  /* Wait for writers, then checkpoint */
#define SQLITE_CHECKPOINT_RESTART  2  /* Like FULL but wait for readers */
#define SQLITE_CHECKPOINT_TRUNCATE 3  /* Like RESTART but also truncate WAL */

/*
** CAPI3REF: Virtual Table Interface Configuration
**
** This function may be called by either the [xConnect] or [xCreate] method
** of a [virtual table] implementation to configure

#endif /* _FTS5_H */

/******** End of fts5.h *********/

/************** End of sqlite3.h *********************************************/
/************** Continuing where we left off in sqliteInt.h ******************/

/*
** Reuse the STATIC_LRU for mutex access to sqlite3_temp_directory.
*/
#define SQLITE_MUTEX_STATIC_TEMPDIR SQLITE_MUTEX_STATIC_VFS1

/*
** Include the configuration header output by 'configure' if we're using the
** autoconf-based build
*/
#if defined(_HAVE_SQLITE_CONFIG_H) && !defined(SQLITECONFIG_H)
#include "sqlite_cfg.h"
#define SQLITECONFIG_H 1
#endif

/************** Include sqliteLimit.h in the middle of sqliteInt.h ***********/
/************** Begin file sqliteLimit.h *************************************/
/*
** 2007 May 7

typedef struct ExprList ExprList;
typedef struct FKey FKey;
typedef struct FuncDestructor FuncDestructor;
typedef struct FuncDef FuncDef;
typedef struct FuncDefHash FuncDefHash;
typedef struct IdList IdList;
typedef struct Index Index;
typedef struct IndexedExpr IndexedExpr;
typedef struct IndexSample IndexSample;
typedef struct KeyClass KeyClass;
typedef struct KeyInfo KeyInfo;
typedef struct Lookaside Lookaside;
typedef struct LookasideSlot LookasideSlot;
typedef struct Module Module;
typedef struct NameContext NameContext;

** A bit in a Bitmask
*/
#define MASKBIT(n)    (((Bitmask)1)<<(n))
#define MASKBIT64(n)  (((u64)1)<<(n))
#define MASKBIT32(n)  (((unsigned int)1)<<(n))
#define SMASKBIT32(n) ((n)<=31?((unsigned int)1)<<(n):0)
#define ALLBITS       ((Bitmask)-1)
#define TOPBIT        (((Bitmask)1)<<(BMS-1))

/* A VList object records a mapping between parameters/variables/wildcards
** in the SQL statement (such as $abc, @pqr, or :xyz) and the integer
** variable number associated with that parameter.  See the format description
** on the sqlite3VListAdd() routine for more information.  A VList is really
** just an array of integers.
*/
typedef int VList;

/*
** Defer sourcing vdbe.h and btree.h until after the "u8" and
** "BusyHandler" typedefs. vdbe.h also requires a few of the opaque
** pointer types (i.e. FuncDef) defined above.
*/
/************** Include os.h in the middle of sqliteInt.h ********************/
/************** Begin file os.h **********************************************/
/*
** 2001 September 16
**
** The author disclaims copyright to this source code.  In place of
** a legal notice, here is a blessing:
**
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
******************************************************************************
**
** This header file (together with is companion C source-code file
** "os.c") attempt to abstract the underlying operating system so that
** the SQLite library will work on both POSIX and windows systems.
**
** This header file is #include-ed by sqliteInt.h and thus ends up
** being included by every source file.
*/
#ifndef _SQLITE_OS_H_
#define _SQLITE_OS_H_

/*
** Attempt to automatically detect the operating system and setup the
** necessary pre-processor macros for it.
*/
/************** Include os_setup.h in the middle of os.h *********************/
/************** Begin file os_setup.h ****************************************/
/*
** 2013 November 25
**
** The author disclaims copyright to this source code.  In place of
** a legal notice, here is a blessing:
**
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
******************************************************************************
**
** This file contains pre-processor directives related to operating system
** detection and/or setup.
*/
#ifndef SQLITE_OS_SETUP_H
#define SQLITE_OS_SETUP_H

/*
** Figure out if we are dealing with Unix, Windows, or some other operating
** system.
**
** After the following block of preprocess macros, all of
**
**    SQLITE_OS_KV
**    SQLITE_OS_OTHER
**    SQLITE_OS_UNIX
**    SQLITE_OS_WIN
**
** will defined to either 1 or 0. One of them will be 1. The others will be 0.
** If none of the macros are initially defined, then select either
** SQLITE_OS_UNIX or SQLITE_OS_WIN depending on the target platform.
**
** If SQLITE_OS_OTHER=1 is specified at compile-time, then the application
** must provide its own VFS implementation together with sqlite3_os_init()
** and sqlite3_os_end() routines.
*/
#if !defined(SQLITE_OS_KV) && !defined(SQLITE_OS_OTHER) && \
       !defined(SQLITE_OS_UNIX) && !defined(SQLITE_OS_WIN)
#  if defined(_WIN32) || defined(WIN32) || defined(__CYGWIN__) || \
          defined(__MINGW32__) || defined(__BORLANDC__)
#    define SQLITE_OS_WIN 1
#    define SQLITE_OS_UNIX 0
#  else
#    define SQLITE_OS_WIN 0
#    define SQLITE_OS_UNIX 1
#  endif
#endif
#if SQLITE_OS_OTHER+1>1
#  undef SQLITE_OS_KV
#  define SQLITE_OS_KV 0
#  undef SQLITE_OS_UNIX
#  define SQLITE_OS_UNIX 0
#  undef SQLITE_OS_WIN
#  define SQLITE_OS_WIN 0
#endif
#if SQLITE_OS_KV+1>1
#  undef SQLITE_OS_OTHER
#  define SQLITE_OS_OTHER 0
#  undef SQLITE_OS_UNIX
#  define SQLITE_OS_UNIX 0
#  undef SQLITE_OS_WIN
#  define SQLITE_OS_WIN 0
#  define SQLITE_OMIT_LOAD_EXTENSION 1
#  define SQLITE_OMIT_WAL 1
#  define SQLITE_OMIT_DEPRECATED 1
#  undef SQLITE_TEMP_STORE
#  define SQLITE_TEMP_STORE 3  /* Always use memory for temporary storage */
#  define SQLITE_DQS 0
#  define SQLITE_OMIT_SHARED_CACHE 1
#  define SQLITE_OMIT_AUTOINIT 1
#endif
#if SQLITE_OS_UNIX+1>1
#  undef SQLITE_OS_KV
#  define SQLITE_OS_KV 0
#  undef SQLITE_OS_OTHER
#  define SQLITE_OS_OTHER 0
#  undef SQLITE_OS_WIN
#  define SQLITE_OS_WIN 0
#endif
#if SQLITE_OS_WIN+1>1
#  undef SQLITE_OS_KV
#  define SQLITE_OS_KV 0
#  undef SQLITE_OS_OTHER
#  define SQLITE_OS_OTHER 0
#  undef SQLITE_OS_UNIX
#  define SQLITE_OS_UNIX 0
#endif


#endif /* SQLITE_OS_SETUP_H */

/************** End of os_setup.h ********************************************/
/************** Continuing where we left off in os.h *************************/

/* If the SET_FULLSYNC macro is not defined above, then make it
** a no-op
*/
#ifndef SET_FULLSYNC
# define SET_FULLSYNC(x,y)
#endif

/* Maximum pathname length.  Note: FILENAME_MAX defined by stdio.h
*/
#ifndef SQLITE_MAX_PATHLEN
# define SQLITE_MAX_PATHLEN FILENAME_MAX
#endif

/* Maximum number of symlinks that will be resolved while trying to
** expand a filename in xFullPathname() in the VFS.
*/
#ifndef SQLITE_MAX_SYMLINK
# define SQLITE_MAX_SYMLINK 200
#endif

/*
** The default size of a disk sector
*/
#ifndef SQLITE_DEFAULT_SECTOR_SIZE
# define SQLITE_DEFAULT_SECTOR_SIZE 4096
#endif

/*
** Temporary files are named starting with this prefix followed by 16 random
** alphanumeric characters, and no file extension. They are stored in the
** OS's standard temporary file directory, and are deleted prior to exit.
** If sqlite is being embedded in another program, you may wish to change the
** prefix to reflect your program's name, so that if your program exits
** prematurely, old temporary files can be easily identified. This can be done
** using -DSQLITE_TEMP_FILE_PREFIX=myprefix_ on the compiler command line.
**
** 2006-10-31:  The default prefix used to be "sqlite_".  But then
** Mcafee started using SQLite in their anti-virus product and it
** started putting files with the "sqlite" name in the c:/temp folder.
** This annoyed many windows users.  Those users would then do a
** Google search for "sqlite", find the telephone numbers of the
** developers and call to wake them up at night and complain.
** For this reason, the default name prefix is changed to be "sqlite"
** spelled backwards.  So the temp files are still identified, but
** anybody smart enough to figure out the code is also likely smart
** enough to know that calling the developer will not help get rid
** of the file.
*/
#ifndef SQLITE_TEMP_FILE_PREFIX
# define SQLITE_TEMP_FILE_PREFIX "etilqs_"
#endif

/*
** The following values may be passed as the second argument to
** sqlite3OsLock(). The various locks exhibit the following semantics:
**
** SHARED:    Any number of processes may hold a SHARED lock simultaneously.
** RESERVED:  A single process may hold a RESERVED lock on a file at
**            any time. Other processes may hold and obtain new SHARED locks.
** PENDING:   A single process may hold a PENDING lock on a file at
**            any one time. Existing SHARED locks may persist, but no new
**            SHARED locks may be obtained by other processes.
** EXCLUSIVE: An EXCLUSIVE lock precludes all other locks.
**
** PENDING_LOCK may not be passed directly to sqlite3OsLock(). Instead, a
** process that requests an EXCLUSIVE lock may actually obtain a PENDING
** lock. This can be upgraded to an EXCLUSIVE lock by a subsequent call to
** sqlite3OsLock().
*/
#define NO_LOCK         0
#define SHARED_LOCK     1
#define RESERVED_LOCK   2
#define PENDING_LOCK    3
#define EXCLUSIVE_LOCK  4

/*
** File Locking Notes:  (Mostly about windows but also some info for Unix)
**
** We cannot use LockFileEx() or UnlockFileEx() on Win95/98/ME because
** those functions are not available.  So we use only LockFile() and
** UnlockFile().
**
** LockFile() prevents not just writing but also reading by other processes.
** A SHARED_LOCK is obtained by locking a single randomly-chosen
** byte out of a specific range of bytes. The lock byte is obtained at
** random so two separate readers can probably access the file at the
** same time, unless they are unlucky and choose the same lock byte.
** An EXCLUSIVE_LOCK is obtained by locking all bytes in the range.
** There can only be one writer.  A RESERVED_LOCK is obtained by locking
** a single byte of the file that is designated as the reserved lock byte.
** A PENDING_LOCK is obtained by locking a designated byte different from
** the RESERVED_LOCK byte.
**
** On WinNT/2K/XP systems, LockFileEx() and UnlockFileEx() are available,
** which means we can use reader/writer locks.  When reader/writer locks
** are used, the lock is placed on the same range of bytes that is used
** for probabilistic locking in Win95/98/ME.  Hence, the locking scheme
** will support two or more Win95 readers or two or more WinNT readers.
** But a single Win95 reader will lock out all WinNT readers and a single
** WinNT reader will lock out all other Win95 readers.
**
** The following #defines specify the range of bytes used for locking.
** SHARED_SIZE is the number of bytes available in the pool from which
** a random byte is selected for a shared lock.  The pool of bytes for
** shared locks begins at SHARED_FIRST.
**
** The same locking strategy and
** byte ranges are used for Unix.  This leaves open the possibility of having
** clients on win95, winNT, and unix all talking to the same shared file
** and all locking correctly.  To do so would require that samba (or whatever
** tool is being used for file sharing) implements locks correctly between
** windows and unix.  I'm guessing that isn't likely to happen, but by
** using the same locking range we are at least open to the possibility.
**
** Locking in windows is manditory.  For this reason, we cannot store
** actual data in the bytes used for locking.  The pager never allocates
** the pages involved in locking therefore.  SHARED_SIZE is selected so
** that all locks will fit on a single page even at the minimum page size.
** PENDING_BYTE defines the beginning of the locks.  By default PENDING_BYTE
** is set high so that we don't have to allocate an unused page except
** for very large databases.  But one should test the page skipping logic
** by setting PENDING_BYTE low and running the entire regression suite.
**
** Changing the value of PENDING_BYTE results in a subtly incompatible
** file format.  Depending on how it is changed, you might not notice
** the incompatibility right away, even running a full regression test.
** The default location of PENDING_BYTE is the first byte past the
** 1GB boundary.
**
*/
#ifdef SQLITE_OMIT_WSD
# define PENDING_BYTE     (0x40000000)
#else
# define PENDING_BYTE      sqlite3PendingByte
#endif
#define RESERVED_BYTE     (PENDING_BYTE+1)
#define SHARED_FIRST      (PENDING_BYTE+2)
#define SHARED_SIZE       510

/*
** Wrapper around OS specific sqlite3_os_init() function.
*/
SQLITE_PRIVATE int sqlite3OsInit(void);

/*
** Functions for accessing sqlite3_file methods
*/
SQLITE_PRIVATE void sqlite3OsClose(sqlite3_file*);
SQLITE_PRIVATE int sqlite3OsRead(sqlite3_file*, void*, int amt, i64 offset);
SQLITE_PRIVATE int sqlite3OsWrite(sqlite3_file*, const void*, int amt, i64 offset);
SQLITE_PRIVATE int sqlite3OsTruncate(sqlite3_file*, i64 size);
SQLITE_PRIVATE int sqlite3OsSync(sqlite3_file*, int);
SQLITE_PRIVATE int sqlite3OsFileSize(sqlite3_file*, i64 *pSize);
SQLITE_PRIVATE int sqlite3OsLock(sqlite3_file*, int);
SQLITE_PRIVATE int sqlite3OsUnlock(sqlite3_file*, int);
SQLITE_PRIVATE int sqlite3OsCheckReservedLock(sqlite3_file *id, int *pResOut);
SQLITE_PRIVATE int sqlite3OsFileControl(sqlite3_file*,int,void*);
SQLITE_PRIVATE void sqlite3OsFileControlHint(sqlite3_file*,int,void*);
#define SQLITE_FCNTL_DB_UNCHANGED 0xca093fa0
SQLITE_PRIVATE int sqlite3OsSectorSize(sqlite3_file *id);
SQLITE_PRIVATE int sqlite3OsDeviceCharacteristics(sqlite3_file *id);
#ifndef SQLITE_OMIT_WAL
SQLITE_PRIVATE int sqlite3OsShmMap(sqlite3_file *,int,int,int,void volatile **);
SQLITE_PRIVATE int sqlite3OsShmLock(sqlite3_file *id, int, int, int);
SQLITE_PRIVATE void sqlite3OsShmBarrier(sqlite3_file *id);
SQLITE_PRIVATE int sqlite3OsShmUnmap(sqlite3_file *id, int);
#endif /* SQLITE_OMIT_WAL */
SQLITE_PRIVATE int sqlite3OsFetch(sqlite3_file *id, i64, int, void **);
SQLITE_PRIVATE int sqlite3OsUnfetch(sqlite3_file *, i64, void *);


/*
** Functions for accessing sqlite3_vfs methods
*/
SQLITE_PRIVATE int sqlite3OsOpen(sqlite3_vfs *, const char *, sqlite3_file*, int, int *);
SQLITE_PRIVATE int sqlite3OsDelete(sqlite3_vfs *, const char *, int);
SQLITE_PRIVATE int sqlite3OsAccess(sqlite3_vfs *, const char *, int, int *pResOut);
SQLITE_PRIVATE int sqlite3OsFullPathname(sqlite3_vfs *, const char *, int, char *);
#ifndef SQLITE_OMIT_LOAD_EXTENSION
SQLITE_PRIVATE void *sqlite3OsDlOpen(sqlite3_vfs *, const char *);
SQLITE_PRIVATE void sqlite3OsDlError(sqlite3_vfs *, int, char *);
SQLITE_PRIVATE void (*sqlite3OsDlSym(sqlite3_vfs *, void *, const char *))(void);
SQLITE_PRIVATE void sqlite3OsDlClose(sqlite3_vfs *, void *);
#endif /* SQLITE_OMIT_LOAD_EXTENSION */
SQLITE_PRIVATE int sqlite3OsRandomness(sqlite3_vfs *, int, char *);
SQLITE_PRIVATE int sqlite3OsSleep(sqlite3_vfs *, int);
SQLITE_PRIVATE int sqlite3OsGetLastError(sqlite3_vfs*);
SQLITE_PRIVATE int sqlite3OsCurrentTimeInt64(sqlite3_vfs *, sqlite3_int64*);

/*
** Convenience functions for opening and closing files using
** sqlite3_malloc() to obtain space for the file-handle structure.
*/
SQLITE_PRIVATE int sqlite3OsOpenMalloc(sqlite3_vfs *, const char *, sqlite3_file **, int,int*);
SQLITE_PRIVATE void sqlite3OsCloseFree(sqlite3_file *);

#endif /* _SQLITE_OS_H_ */

/************** End of os.h **************************************************/
/************** Continuing where we left off in sqliteInt.h ******************/
/************** Include pager.h in the middle of sqliteInt.h *****************/
/************** Begin file pager.h *******************************************/
/*
** 2001 September 15
**
** The author disclaims copyright to this source code.  In place of
** a legal notice, here is a blessing:

#define OP_AutoCommit      1
#define OP_Transaction     2
#define OP_Checkpoint      3
#define OP_JournalMode     4
#define OP_Vacuum          5
#define OP_VFilter         6 /* jump, synopsis: iplan=r[P3] zplan='P4'     */
#define OP_VUpdate         7 /* synopsis: data=r[P3@P2]                    */
#define OP_Init            8 /* jump, synopsis: Start at P2                */
#define OP_Goto            9 /* jump                                       */
#define OP_Gosub          10 /* jump                                       */
#define OP_InitCoroutine  11 /* jump                                       */
#define OP_Yield          12 /* jump                                       */
#define OP_MustBeInt      13 /* jump                                       */
#define OP_Jump           14 /* jump                                       */
#define OP_Once           15 /* jump                                       */
#define OP_If             16 /* jump                                       */
#define OP_IfNot          17 /* jump                                       */
#define OP_IsType         18 /* jump, synopsis: if typeof(P1.P3) in P5 goto P2 */

#define OP_Not            19 /* same as TK_NOT, synopsis: r[P2]= !r[P1]    */
#define OP_IfNullRow      20 /* jump, synopsis: if P1.nullRow then r[P3]=NULL, goto P2 */
#define OP_SeekLT         21 /* jump, synopsis: key=r[P3@P4]               */
#define OP_SeekLE         22 /* jump, synopsis: key=r[P3@P4]               */
#define OP_SeekGE         23 /* jump, synopsis: key=r[P3@P4]               */
#define OP_SeekGT         24 /* jump, synopsis: key=r[P3@P4]               */
#define OP_IfNotOpen      25 /* jump, synopsis: if( !csr[P1] ) goto P2     */
#define OP_IfNoHope       26 /* jump, synopsis: key=r[P3@P4]               */
#define OP_NoConflict     27 /* jump, synopsis: key=r[P3@P4]               */
#define OP_NotFound       28 /* jump, synopsis: key=r[P3@P4]               */
#define OP_Found          29 /* jump, synopsis: key=r[P3@P4]               */
#define OP_SeekRowid      30 /* jump, synopsis: intkey=r[P3]               */
#define OP_NotExists      31 /* jump, synopsis: intkey=r[P3]               */
#define OP_Last           32 /* jump                                       */
#define OP_IfSmaller      33 /* jump                                       */
#define OP_SorterSort     34 /* jump                                       */
#define OP_Sort           35 /* jump                                       */
#define OP_Rewind         36 /* jump                                       */
#define OP_SorterNext     37 /* jump                                       */
#define OP_Prev           38 /* jump                                       */
#define OP_Next           39 /* jump                                       */

#define OP_IdxLE          40 /* jump, synopsis: key=r[P3@P4]               */
#define OP_IdxGT          41 /* jump, synopsis: key=r[P3@P4]               */
#define OP_IdxLT          42 /* jump, synopsis: key=r[P3@P4]               */
#define OP_Or             43 /* same as TK_OR, synopsis: r[P3]=(r[P1] || r[P2]) */
#define OP_And            44 /* same as TK_AND, synopsis: r[P3]=(r[P1] && r[P2]) */
#define OP_IdxGE          45 /* jump, synopsis: key=r[P3@P4]               */
#define OP_RowSetRead     46 /* jump, synopsis: r[P3]=rowset(P1)           */
#define OP_RowSetTest     47 /* jump, synopsis: if r[P3] in rowset(P1) goto P2 */
#define OP_Program        48 /* jump                                       */
#define OP_FkIfZero       49 /* jump, synopsis: if fkctr[P1]==0 goto P2    */

#define OP_IsNull         50 /* jump, same as TK_ISNULL, synopsis: if r[P1]==NULL goto P2 */
#define OP_NotNull        51 /* jump, same as TK_NOTNULL, synopsis: if r[P1]!=NULL goto P2 */
#define OP_Ne             52 /* jump, same as TK_NE, synopsis: IF r[P3]!=r[P1] */
#define OP_Eq             53 /* jump, same as TK_EQ, synopsis: IF r[P3]==r[P1] */
#define OP_Gt             54 /* jump, same as TK_GT, synopsis: IF r[P3]>r[P1] */
#define OP_Le             55 /* jump, same as TK_LE, synopsis: IF r[P3]<=r[P1] */
#define OP_Lt             56 /* jump, same as TK_LT, synopsis: IF r[P3]<r[P1] */
#define OP_Ge             57 /* jump, same as TK_GE, synopsis: IF r[P3]>=r[P1] */
#define OP_ElseEq         58 /* jump, same as TK_ESCAPE                    */
#define OP_IfPos          59 /* jump, synopsis: if r[P1]>0 then r[P1]-=P3, goto P2 */
#define OP_IfNotZero      60 /* jump, synopsis: if r[P1]!=0 then r[P1]--, goto P2 */
#define OP_DecrJumpZero   61 /* jump, synopsis: if (--r[P1])==0 goto P2    */
#define OP_IncrVacuum     62 /* jump                                       */
#define OP_VNext          63 /* jump                                       */
#define OP_Filter         64 /* jump, synopsis: if key(P3@P4) not in filter(P1) goto P2 */

#define OP_PureFunc       65 /* synopsis: r[P3]=func(r[P2@NP])             */
#define OP_Function       66 /* synopsis: r[P3]=func(r[P2@NP])             */
#define OP_Return         67
#define OP_EndCoroutine   68
#define OP_HaltIfNull     69 /* synopsis: if r[P3]=null halt               */
#define OP_Halt           70
#define OP_Integer        71 /* synopsis: r[P2]=P1                         */

#define OPFLG_IN1         0x02  /* in1:   P1 is an input */
#define OPFLG_IN2         0x04  /* in2:   P2 is an input */
#define OPFLG_IN3         0x08  /* in3:   P3 is an input */
#define OPFLG_OUT2        0x10  /* out2:  P2 is an output */
#define OPFLG_OUT3        0x20  /* out3:  P3 is an output */
#define OPFLG_INITIALIZER {\
/*   0 */ 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x01, 0x00,\
/*   8 */ 0x01, 0x01, 0x01, 0x01, 0x03, 0x03, 0x01, 0x01,\
/*  16 */ 0x03, 0x03, 0x01, 0x12, 0x01, 0x09, 0x09, 0x09,\
/*  24 */ 0x09, 0x01, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09,\
/*  32 */ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,\
/*  40 */ 0x01, 0x01, 0x01, 0x26, 0x26, 0x01, 0x23, 0x0b,\
/*  48 */ 0x01, 0x01, 0x03, 0x03, 0x0b, 0x0b, 0x0b, 0x0b,\
/*  56 */ 0x0b, 0x0b, 0x01, 0x03, 0x03, 0x03, 0x01, 0x01,\
/*  64 */ 0x01, 0x00, 0x00, 0x02, 0x02, 0x08, 0x00, 0x10,\
/*  72 */ 0x10, 0x10, 0x00, 0x10, 0x00, 0x10, 0x10, 0x00,\
/*  80 */ 0x00, 0x10, 0x10, 0x00, 0x00, 0x00, 0x02, 0x02,\
/*  88 */ 0x02, 0x00, 0x00, 0x12, 0x1e, 0x20, 0x00, 0x00,\
/*  96 */ 0x00, 0x00, 0x10, 0x10, 0x00, 0x00, 0x26, 0x26,\
/* 104 */ 0x26, 0x26, 0x26, 0x26, 0x26, 0x26, 0x26, 0x26,\
/* 112 */ 0x00, 0x00, 0x12, 0x00, 0x00, 0x10, 0x00, 0x00,\

#endif
SQLITE_PRIVATE void sqlite3VdbeAddParseSchemaOp(Vdbe*, int, char*, u16);
SQLITE_PRIVATE void sqlite3VdbeChangeOpcode(Vdbe*, int addr, u8);
SQLITE_PRIVATE void sqlite3VdbeChangeP1(Vdbe*, int addr, int P1);
SQLITE_PRIVATE void sqlite3VdbeChangeP2(Vdbe*, int addr, int P2);
SQLITE_PRIVATE void sqlite3VdbeChangeP3(Vdbe*, int addr, int P3);
SQLITE_PRIVATE void sqlite3VdbeChangeP5(Vdbe*, u16 P5);
SQLITE_PRIVATE void sqlite3VdbeTypeofColumn(Vdbe*, int);
SQLITE_PRIVATE void sqlite3VdbeJumpHere(Vdbe*, int addr);
SQLITE_PRIVATE void sqlite3VdbeJumpHereOrPopInst(Vdbe*, int addr);
SQLITE_PRIVATE int sqlite3VdbeChangeToNoop(Vdbe*, int addr);
SQLITE_PRIVATE int sqlite3VdbeDeletePriorOpcode(Vdbe*, u8 op);
#ifdef SQLITE_DEBUG
SQLITE_PRIVATE   void sqlite3VdbeReleaseRegisters(Parse*,int addr, int n, u32 mask, int);
#else
# define sqlite3VdbeReleaseRegisters(P,A,N,M,F)
#endif
SQLITE_PRIVATE void sqlite3VdbeChangeP4(Vdbe*, int addr, const char *zP4, int N);
SQLITE_PRIVATE void sqlite3VdbeAppendP4(Vdbe*, void *pP4, int p4type);
SQLITE_PRIVATE void sqlite3VdbeSetP4KeyInfo(Parse*, Index*);
SQLITE_PRIVATE void sqlite3VdbeUsesBtree(Vdbe*, int);
SQLITE_PRIVATE VdbeOp *sqlite3VdbeGetOp(Vdbe*, int);
SQLITE_PRIVATE VdbeOp *sqlite3VdbeGetLastOp(Vdbe*);
SQLITE_PRIVATE int sqlite3VdbeMakeLabel(Parse*);
SQLITE_PRIVATE void sqlite3VdbeRunOnlyOnce(Vdbe*);
SQLITE_PRIVATE void sqlite3VdbeReusable(Vdbe*);
SQLITE_PRIVATE void sqlite3VdbeDelete(Vdbe*);
SQLITE_PRIVATE void sqlite3VdbeMakeReady(Vdbe*,Parse*);
SQLITE_PRIVATE int sqlite3VdbeFinalize(Vdbe*);
SQLITE_PRIVATE void sqlite3VdbeResolveLabel(Vdbe*, int);

SQLITE_PRIVATE int sqlite3PCacheIsDirty(PCache *pCache);
#endif

#endif /* _PCACHE_H_ */

/************** End of pcache.h **********************************************/
/************** Continuing where we left off in sqliteInt.h ******************/



































































































































































































































































































/************** Include mutex.h in the middle of sqliteInt.h *****************/
/************** Begin file mutex.h *******************************************/
/*
** 2007 August 28
**
** The author disclaims copyright to this source code.  In place of
** a legal notice, here is a blessing:

  LookasideSlot *pSmallInit; /* List of small buffers not prediously used */
  LookasideSlot *pSmallFree; /* List of available small buffers */
  void *pMiddle;          /* First byte past end of full-size buffers and
                          ** the first byte of LOOKASIDE_SMALL buffers */
#endif /* SQLITE_OMIT_TWOSIZE_LOOKASIDE */
  void *pStart;           /* First byte of available memory space */
  void *pEnd;             /* First byte past end of available space */
  void *pTrueEnd;         /* True value of pEnd, when db->pnBytesFreed!=0 */
};
struct LookasideSlot {
  LookasideSlot *pNext;    /* Next buffer in the list of free buffers */
};

#define DisableLookaside  db->lookaside.bDisable++;db->lookaside.sz=0
#define EnableLookaside   db->lookaside.bDisable--;\

   /* TH3 expects this value  ^^^^^^^^^^ to be 0x40000. Coordinate any change */
#define SQLITE_BloomFilter    0x00080000 /* Use a Bloom filter on searches */
#define SQLITE_BloomPulldown  0x00100000 /* Run Bloom filters early */
#define SQLITE_BalancedMerge  0x00200000 /* Balance multi-way merges */
#define SQLITE_ReleaseReg     0x00400000 /* Use OP_ReleaseReg for testing */
#define SQLITE_FlttnUnionAll  0x00800000 /* Disable the UNION ALL flattener */
   /* TH3 expects this value  ^^^^^^^^^^ See flatten04.test */
#define SQLITE_IndexedExpr    0x01000000 /* Pull exprs from index when able */
#define SQLITE_AllOpts        0xffffffff /* All optimizations */

/*
** Macros for testing whether or not optimizations are enabled or disabled.
*/
#define OptimizationDisabled(db, mask)  (((db)->dbOptFlags&(mask))!=0)
#define OptimizationEnabled(db, mask)   (((db)->dbOptFlags&(mask))==0)

** Test to see whether or not a table is a virtual table.  This is
** done as a macro so that it will be optimized out when virtual
** table support is omitted from the build.
*/
#ifndef SQLITE_OMIT_VIRTUALTABLE
#  define IsVirtual(X)      ((X)->eTabType==TABTYP_VTAB)
#  define ExprIsVtab(X)  \
   ((X)->op==TK_COLUMN && (X)->y.pTab->eTabType==TABTYP_VTAB)
#else
#  define IsVirtual(X)      0
#  define ExprIsVtab(X)     0
#endif

/*
** Macros to determine if a column is hidden.  IsOrdinaryHiddenColumn()

** first column to be indexed (c3) has an index of 2 in Ex1.aCol[].
** The second column to be indexed (c1) has an index of 0 in
** Ex1.aCol[], hence Ex2.aiColumn[1]==0.
**
** The Index.onError field determines whether or not the indexed columns
** must be unique and what to do if they are not.  When Index.onError=OE_None,
** it means this is not a unique index.  Otherwise it is a unique index
** and the value of Index.onError indicates which conflict resolution
** algorithm to employ when an attempt is made to insert a non-unique
** element.
**
** The colNotIdxed bitmask is used in combination with SrcItem.colUsed
** for a fast test to see if an index can serve as a covering index.
** colNotIdxed has a 1 bit for every column of the original table that
** is *not* available in the index.  Thus the expression
** "colUsed & colNotIdxed" will be non-zero if the index is not a
** covering index.  The most significant bit of of colNotIdxed will always
** be true (note-20221022-a).  If a column beyond the 63rd column of the
** table is used, the "colUsed & colNotIdxed" test will always be non-zero
** and we have to assume either that the index is not covering, or use
** an alternative (slower) algorithm to determine whether or not
** the index is covering.
**
** While parsing a CREATE TABLE or CREATE INDEX statement in order to
** generate VDBE code (as opposed to parsing one read from an sqlite_schema
** table as part of parsing an existing database schema), transient instances
** of this structure may be created. In this case the Index.tnum variable is
** used to store the address of a VDBE instruction, not a database page
** number (it cannot - the database page is not allocated until the VDBE

  unsigned isResized:1;    /* True if resizeIndexObject() has been called */
  unsigned isCovering:1;   /* True if this is a covering index */
  unsigned noSkipScan:1;   /* Do not try to use skip-scan if true */
  unsigned hasStat1:1;     /* aiRowLogEst values come from sqlite_stat1 */
  unsigned bNoQuery:1;     /* Do not use this index to optimize queries */
  unsigned bAscKeyBug:1;   /* True if the bba7b69f9849b5bf bug applies */
  unsigned bHasVCol:1;     /* Index references one or more VIRTUAL columns */
  unsigned bHasExpr:1;     /* Index contains an expression, either a literal
                           ** expression, or a reference to a VIRTUAL column */
#ifdef SQLITE_ENABLE_STAT4
  int nSample;             /* Number of elements in aSample[] */
  int nSampleCol;          /* Size of IndexSample.anEq[] and so on */
  tRowcnt *aAvgEq;         /* Average nEq values for keys not in aSample */
  IndexSample *aSample;    /* Samples of the left-most key */
  tRowcnt *aiRowEst;       /* Non-logarithmic stat1 data for this index */
  tRowcnt nRowEst0;        /* Non-logarithmic number of rows in the index */
#endif
  Bitmask colNotIdxed;     /* Unindexed columns in pTab */
};

/*
** Allowed values for Index.idxType
*/
#define SQLITE_IDXTYPE_APPDEF      0   /* Created using CREATE INDEX */
#define SQLITE_IDXTYPE_UNIQUE      1   /* Implements a UNIQUE constraint */

#define EP_Commuted   0x000400 /* Comparison operator has been commuted */
#define EP_IntValue   0x000800 /* Integer value contained in u.iValue */
#define EP_xIsSelect  0x001000 /* x.pSelect is valid (otherwise x.pList is) */
#define EP_Skip       0x002000 /* Operator does not contribute to affinity */
#define EP_Reduced    0x004000 /* Expr struct EXPR_REDUCEDSIZE bytes only */
#define EP_Win        0x008000 /* Contains window functions */
#define EP_TokenOnly  0x010000 /* Expr struct EXPR_TOKENONLYSIZE bytes only */
                   /* 0x020000 // Available for reuse */
#define EP_IfNullRow  0x040000 /* The TK_IF_NULL_ROW opcode */
#define EP_Unlikely   0x080000 /* unlikely() or likelihood() function */
#define EP_ConstFunc  0x100000 /* A SQLITE_FUNC_CONSTANT or _SLOCHNG function */
#define EP_CanBeNull  0x200000 /* Can be null despite NOT NULL constraint */
#define EP_Subquery   0x400000 /* Tree contains a TK_SELECT operator */
#define EP_Leaf       0x800000 /* Expr.pLeft, .pRight, .u.pSelect all NULL */
#define EP_WinFunc   0x1000000 /* TK_FUNCTION with Expr.y.pWin set */

#define EU4_IDX    1   /* Uses IdList.a.u4.idx */
#define EU4_EXPR   2   /* Uses IdList.a.u4.pExpr -- NOT CURRENTLY USED */

/*
** The SrcItem object represents a single term in the FROM clause of a query.
** The SrcList object is mostly an array of SrcItems.
**
** The jointype starts out showing the join type between the current table
** and the next table on the list.  The parser builds the list this way.
** But sqlite3SrcListShiftJoinType() later shifts the jointypes so that each
** jointype expresses the join between the table and the previous table.
**
** In the colUsed field, the high-order bit (bit 63) is set if the table
** contains more than 63 columns and the 64-th or later column is used.
**
** Union member validity:
**
**    u1.zIndexedBy          fg.isIndexedBy && !fg.isTabFunc
**    u1.pFuncArg            fg.isTabFunc   && !fg.isIndexedBy
**    u2.pIBIndex            fg.isIndexedBy && !fg.isCte
**    u2.pCteUse             fg.isCte       && !fg.isIndexedBy
*/

    unsigned isNestedFrom :1;  /* pSelect is a SF_NestedFrom subquery */
  } fg;
  int iCursor;      /* The VDBE cursor number used to access this table */
  union {
    Expr *pOn;        /* fg.isUsing==0 =>  The ON clause of a join */
    IdList *pUsing;   /* fg.isUsing==1 =>  The USING clause of a join */
  } u3;
  Bitmask colUsed;  /* Bit N set if column N used. Details above for N>62 */
  union {
    char *zIndexedBy;    /* Identifier from "INDEXED BY <zIndex>" clause */
    ExprList *pFuncArg;  /* Arguments to table-valued-function */
  } u1;
  union {
    Index *pIBIndex;  /* Index structure corresponding to u1.zIndexedBy */
    CteUse *pCteUse;  /* CTE Usage info when fg.isCte is true */
  } u2;
};

/*
** The OnOrUsing object represents either an ON clause or a USING clause.
** It can never be both at the same time, but it can be neither.
*/
struct OnOrUsing {
  Expr *pOn;         /* The ON clause of a join */
  IdList *pUsing;    /* The USING clause of a join */
};

/*
** This object represents one or more tables that are the source of
** content for an SQL statement.  For example, a single SrcList object
** is used to hold the FROM clause of a SELECT statement.  SrcList also





** represents the target tables for DELETE, INSERT, and UPDATE statements.


**







*/
struct SrcList {
  int nSrc;        /* Number of tables or subqueries in the FROM clause */
  u32 nAlloc;      /* Number of entries allocated in a[] below */
  SrcItem a[1];    /* One entry for each identifier on the list */
};

# define DbMaskTest(M,I)    (((M)&(((yDbMask)1)<<(I)))!=0)
# define DbMaskZero(M)      (M)=0
# define DbMaskSet(M,I)     (M)|=(((yDbMask)1)<<(I))
# define DbMaskAllZero(M)   (M)==0
# define DbMaskNonZero(M)   (M)!=0
#endif

/*
** For each index X that has as one of its arguments either an expression
** or the name of a virtual generated column, and if X is in scope such that
** the value of the expression can simply be read from the index, then
** there is an instance of this object on the Parse.pIdxExpr list.
**
** During code generation, while generating code to evaluate expressions,
** this list is consulted and if a matching expression is found, the value
** is read from the index rather than being recomputed.
*/
struct IndexedExpr {
  Expr *pExpr;            /* The expression contained in the index */
  int iDataCur;           /* The data cursor associated with the index */
  int iIdxCur;            /* The index cursor */
  int iIdxCol;            /* The index column that contains value of pExpr */
  u8 bMaybeNullRow;       /* True if we need an OP_IfNullRow check */
  IndexedExpr *pIENext;   /* Next in a list of all indexed expressions */
#ifdef SQLITE_ENABLE_EXPLAIN_COMMENTS
  const char *zIdxName;   /* Name of index, used only for bytecode comments */
#endif
};

/*
** An instance of the ParseCleanup object specifies an operation that
** should be performed after parsing to deallocation resources obtained
** during the parse and which are no longer needed.
*/
struct ParseCleanup {
  ParseCleanup *pNext;               /* Next cleanup task */

  u8 nested;           /* Number of nested calls to the parser/code generator */
  u8 nTempReg;         /* Number of temporary registers in aTempReg[] */
  u8 isMultiWrite;     /* True if statement may modify/insert multiple rows */
  u8 mayAbort;         /* True if statement may throw an ABORT exception */
  u8 hasCompound;      /* Need to invoke convertCompoundSelectToSubquery() */
  u8 okConstFactor;    /* OK to factor out constants */
  u8 disableLookaside; /* Number of times lookaside has been disabled */
  u8 prepFlags;        /* SQLITE_PREPARE_* flags */
  u8 withinRJSubrtn;   /* Nesting level for RIGHT JOIN body subroutines */
#if defined(SQLITE_DEBUG) || defined(SQLITE_COVERAGE_TEST)
  u8 earlyCleanup;     /* OOM inside sqlite3ParserAddCleanup() */
#endif
  int nRangeReg;       /* Size of the temporary register block */
  int iRangeReg;       /* First register in temporary register block */
  int nErr;            /* Number of errors seen */
  int nTab;            /* Number of previously allocated VDBE cursors */
  int nMem;            /* Number of memory cells used so far */
  int szOpAlloc;       /* Bytes of memory space allocated for Vdbe.aOp[] */
  int iSelfTab;        /* Table associated with an index on expr, or negative
                       ** of the base register during check-constraint eval */
  int nLabel;          /* The *negative* of the number of labels used */
  int nLabelAlloc;     /* Number of slots in aLabel */
  int *aLabel;         /* Space to hold the labels */
  ExprList *pConstExpr;/* Constant expressions */
  IndexedExpr *pIdxExpr;/* List of expressions used by active indexes */
  Token constraintName;/* Name of the constraint currently being parsed */
  yDbMask writeMask;   /* Start a write transaction on these databases */
  yDbMask cookieMask;  /* Bitmask of schema verified databases */
  int regRowid;        /* Register holding rowid of CREATE TABLE entry */
  int regRoot;         /* Register holding root page number for new objects */
  int nMaxArg;         /* Max args passed to user function by sub-program */
  int nSelect;         /* Number of SELECT stmts. Counter for Select.selId */

    int n;                                    /* A counter */
    int iCur;                                 /* A cursor number */
    SrcList *pSrcList;                        /* FROM clause */
    struct CCurHint *pCCurHint;               /* Used by codeCursorHint() */
    struct RefSrcList *pRefSrcList;           /* sqlite3ReferencesSrcList() */
    int *aiCol;                               /* array of column indexes */
    struct IdxCover *pIdxCover;               /* Check for index coverage */

    ExprList *pGroupBy;                       /* GROUP BY clause */
    Select *pSelect;                          /* HAVING to WHERE clause ctx */
    struct WindowRewrite *pRewrite;           /* Window rewrite context */
    struct WhereConst *pConst;                /* WHERE clause constants */
    struct RenameCtx *pRename;                /* RENAME COLUMN context */
    struct Table *pTab;                       /* Table of generated column */
    struct CoveringIndexCheck *pCovIdxCk;     /* Check for covering index */
    SrcItem *pSrcItem;                        /* A single FROM clause item */
    DbFixer *pFix;                            /* See sqlite3FixSelect() */
  } u;
};

/*
** The following structure contains information used by the sqliteFix...
** routines as they walk the parse tree to make database references
** explicit.

SQLITE_PRIVATE char *sqlite3DbStrNDup(sqlite3*,const char*, u64);
SQLITE_PRIVATE char *sqlite3DbSpanDup(sqlite3*,const char*,const char*);
SQLITE_PRIVATE void *sqlite3Realloc(void*, u64);
SQLITE_PRIVATE void *sqlite3DbReallocOrFree(sqlite3 *, void *, u64);
SQLITE_PRIVATE void *sqlite3DbRealloc(sqlite3 *, void *, u64);
SQLITE_PRIVATE void sqlite3DbFree(sqlite3*, void*);
SQLITE_PRIVATE void sqlite3DbFreeNN(sqlite3*, void*);
SQLITE_PRIVATE void sqlite3DbNNFreeNN(sqlite3*, void*);
SQLITE_PRIVATE int sqlite3MallocSize(const void*);
SQLITE_PRIVATE int sqlite3DbMallocSize(sqlite3*, const void*);
SQLITE_PRIVATE void *sqlite3PageMalloc(int);
SQLITE_PRIVATE void sqlite3PageFree(void*);
SQLITE_PRIVATE void sqlite3MemSetDefault(void);
#ifndef SQLITE_UNTESTABLE
SQLITE_PRIVATE void sqlite3BenignMallocHooks(void (*)(void), void (*)(void));
#endif
SQLITE_PRIVATE int sqlite3HeapNearlyFull(void);

/*
** On systems with ample stack space and that support alloca(), make
** use of alloca() to obtain space for large automatic objects.  By default,
** obtain space from malloc().
**
** The alloca() routine never returns NULL.  This will cause code paths
** that deal with sqlite3StackAlloc() failures to be unreachable.
*/
#ifdef SQLITE_USE_ALLOCA
# define sqlite3StackAllocRaw(D,N)   alloca(N)
# define sqlite3StackAllocRawNN(D,N) alloca(N)
# define sqlite3StackAllocZero(D,N)  memset(alloca(N), 0, N)
# define sqlite3StackFree(D,P)
# define sqlite3StackFreeNN(D,P)
#else
# define sqlite3StackAllocRaw(D,N)   sqlite3DbMallocRaw(D,N)
# define sqlite3StackAllocRawNN(D,N) sqlite3DbMallocRawNN(D,N)
# define sqlite3StackAllocZero(D,N)  sqlite3DbMallocZero(D,N)
# define sqlite3StackFree(D,P)       sqlite3DbFree(D,P)
# define sqlite3StackFreeNN(D,P)     sqlite3DbFreeNN(D,P)
#endif

/* Do not allow both MEMSYS5 and MEMSYS3 to be defined together.  If they
** are, disable MEMSYS3
*/
#ifdef SQLITE_ENABLE_MEMSYS5
SQLITE_PRIVATE const sqlite3_mem_methods *sqlite3MemGetMemsys5(void);

SQLITE_PRIVATE void sqlite3Detach(Parse*, Expr*);
SQLITE_PRIVATE void sqlite3FixInit(DbFixer*, Parse*, int, const char*, const Token*);
SQLITE_PRIVATE int sqlite3FixSrcList(DbFixer*, SrcList*);
SQLITE_PRIVATE int sqlite3FixSelect(DbFixer*, Select*);
SQLITE_PRIVATE int sqlite3FixExpr(DbFixer*, Expr*);
SQLITE_PRIVATE int sqlite3FixTriggerStep(DbFixer*, TriggerStep*);
SQLITE_PRIVATE int sqlite3RealSameAsInt(double,sqlite3_int64);
SQLITE_PRIVATE i64 sqlite3RealToI64(double);
SQLITE_PRIVATE void sqlite3Int64ToText(i64,char*);
SQLITE_PRIVATE int sqlite3AtoF(const char *z, double*, int, u8);
SQLITE_PRIVATE int sqlite3GetInt32(const char *, int*);
SQLITE_PRIVATE int sqlite3GetUInt32(const char*, u32*);
SQLITE_PRIVATE int sqlite3Atoi(const char*);
#ifndef SQLITE_OMIT_UTF16
SQLITE_PRIVATE int sqlite3Utf16ByteLen(const void *pData, int nChar);

SQLITE_PRIVATE int sqlite3ValueFromExpr(sqlite3 *, const Expr *, u8, u8, sqlite3_value **);
SQLITE_PRIVATE void sqlite3ValueApplyAffinity(sqlite3_value *, u8, u8);
#ifndef SQLITE_AMALGAMATION
SQLITE_PRIVATE const unsigned char sqlite3OpcodeProperty[];
SQLITE_PRIVATE const char sqlite3StrBINARY[];
SQLITE_PRIVATE const unsigned char sqlite3StdTypeLen[];
SQLITE_PRIVATE const char sqlite3StdTypeAffinity[];

SQLITE_PRIVATE const char *sqlite3StdType[];
SQLITE_PRIVATE const unsigned char sqlite3UpperToLower[];
SQLITE_PRIVATE const unsigned char *sqlite3aLTb;
SQLITE_PRIVATE const unsigned char *sqlite3aEQb;
SQLITE_PRIVATE const unsigned char *sqlite3aGTb;
SQLITE_PRIVATE const unsigned char sqlite3CtypeMap[];
SQLITE_PRIVATE SQLITE_WSD struct Sqlite3Config sqlite3Config;

SQLITE_PRIVATE Expr *sqlite3VectorFieldSubexpr(Expr*, int);
SQLITE_PRIVATE Expr *sqlite3ExprForVectorField(Parse*,Expr*,int,int);
SQLITE_PRIVATE void sqlite3VectorErrorMsg(Parse*, Expr*);

#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
SQLITE_PRIVATE const char **sqlite3CompileOptions(int *pnOpt);
#endif

#if SQLITE_OS_UNIX && defined(SQLITE_OS_KV_OPTIONAL)
SQLITE_PRIVATE int sqlite3KvvfsInit(void);
#endif

#endif /* SQLITEINT_H */

/************** End of sqliteInt.h *******************************************/
/************** Begin file os_common.h ***************************************/
/*
** 2004 May 22

#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS /* IMP: R-16824-07538 */

/*
** Include the configuration header output by 'configure' if we're using the
** autoconf-based build
*/
#if defined(_HAVE_SQLITE_CONFIG_H) && !defined(SQLITECONFIG_H)
/* #include "sqlite_cfg.h" */
#define SQLITECONFIG_H 1
#endif

/* These macros are provided to "stringify" the value of the define
** for those options in which the value is meaningful. */
#define CTIMEOPT_VAL_(opt) #opt
#define CTIMEOPT_VAL(opt) CTIMEOPT_VAL_(opt)

#endif
#ifdef SQLITE_DISABLE_PAGECACHE_OVERFLOW_STATS
  "DISABLE_PAGECACHE_OVERFLOW_STATS",
#endif
#ifdef SQLITE_DISABLE_SKIPAHEAD_DISTINCT
  "DISABLE_SKIPAHEAD_DISTINCT",
#endif
#ifdef SQLITE_DQS
  "DQS=" CTIMEOPT_VAL(SQLITE_DQS),
#endif
#ifdef SQLITE_ENABLE_8_3_NAMES
  "ENABLE_8_3_NAMES=" CTIMEOPT_VAL(SQLITE_ENABLE_8_3_NAMES),
#endif
#ifdef SQLITE_ENABLE_API_ARMOR
  "ENABLE_API_ARMOR",
#endif
#ifdef SQLITE_ENABLE_ATOMIC_WRITE

#endif
#ifdef SQLITE_OMIT_WSD
  "OMIT_WSD",
#endif
#ifdef SQLITE_OMIT_XFER_OPT
  "OMIT_XFER_OPT",
#endif



#ifdef SQLITE_PERFORMANCE_TRACE
  "PERFORMANCE_TRACE",
#endif
#ifdef SQLITE_POWERSAFE_OVERWRITE
# if SQLITE_POWERSAFE_OVERWRITE != 1
  "POWERSAFE_OVERWRITE=" CTIMEOPT_VAL(SQLITE_POWERSAFE_OVERWRITE),
# endif

**    sqlite3StdType[]            The actual names of the datatypes.
**
**    sqlite3StdTypeLen[]         The length (in bytes) of each entry
**                                in sqlite3StdType[].
**
**    sqlite3StdTypeAffinity[]    The affinity associated with each entry
**                                in sqlite3StdType[].




*/
SQLITE_PRIVATE const unsigned char sqlite3StdTypeLen[] = { 3, 4, 3, 7, 4, 4 };
SQLITE_PRIVATE const char sqlite3StdTypeAffinity[] = {
  SQLITE_AFF_NUMERIC,
  SQLITE_AFF_BLOB,
  SQLITE_AFF_INTEGER,
  SQLITE_AFF_INTEGER,
  SQLITE_AFF_REAL,
  SQLITE_AFF_TEXT
};








SQLITE_PRIVATE const char *sqlite3StdType[] = {
  "ANY",
  "BLOB",
  "INT",
  "INTEGER",
  "REAL",
  "TEXT"

** state of the virtual machine.
**
** The "sqlite3_stmt" structure pointer that is returned by sqlite3_prepare()
** is really a pointer to an instance of this structure.
*/
struct Vdbe {
  sqlite3 *db;            /* The database connection that owns this statement */
  Vdbe **ppVPrev,*pVNext; /* Linked list of VDBEs with the same Vdbe.db */
  Parse *pParse;          /* Parsing context used to create this Vdbe */
  ynVar nVar;             /* Number of entries in aVar[] */
  int nMem;               /* Number of memory locations currently allocated */
  int nCursor;            /* Number of slots in apCsr[] */
  u32 cacheCtr;           /* VdbeCursor row cache generation counter */
  int pc;                 /* The program counter */
  int rc;                 /* Value to return */

    */
    case SQLITE_DBSTATUS_SCHEMA_USED: {
      int i;                      /* Used to iterate through schemas */
      int nByte = 0;              /* Used to accumulate return value */

      sqlite3BtreeEnterAll(db);
      db->pnBytesFreed = &nByte;
      assert( db->lookaside.pEnd==db->lookaside.pTrueEnd );
      db->lookaside.pEnd = db->lookaside.pStart;
      for(i=0; i<db->nDb; i++){
        Schema *pSchema = db->aDb[i].pSchema;
        if( ALWAYS(pSchema!=0) ){
          HashElem *p;

          nByte += sqlite3GlobalConfig.m.xRoundup(sizeof(HashElem)) * (
              pSchema->tblHash.count

          }
          for(p=sqliteHashFirst(&pSchema->tblHash); p; p=sqliteHashNext(p)){
            sqlite3DeleteTable(db, (Table *)sqliteHashData(p));
          }
        }
      }
      db->pnBytesFreed = 0;
      db->lookaside.pEnd = db->lookaside.pTrueEnd;
      sqlite3BtreeLeaveAll(db);

      *pHighwater = 0;
      *pCurrent = nByte;
      break;
    }

    /*
    ** *pCurrent gets an accurate estimate of the amount of memory used
    ** to store all prepared statements.
    ** *pHighwater is set to zero.
    */
    case SQLITE_DBSTATUS_STMT_USED: {
      struct Vdbe *pVdbe;         /* Used to iterate through VMs */
      int nByte = 0;              /* Used to accumulate return value */

      db->pnBytesFreed = &nByte;
      assert( db->lookaside.pEnd==db->lookaside.pTrueEnd );
      db->lookaside.pEnd = db->lookaside.pStart;
      for(pVdbe=db->pVdbe; pVdbe; pVdbe=pVdbe->pVNext){
        sqlite3VdbeDelete(pVdbe);
      }
      db->lookaside.pEnd = db->lookaside.pTrueEnd;
      db->pnBytesFreed = 0;

      *pHighwater = 0;  /* IMP: R-64479-57858 */
      *pCurrent = nByte;

      break;
    }

  A = Y/100;
  B = 2 - A + (A/4);
  X1 = 36525*(Y+4716)/100;
  X2 = 306001*(M+1)/10000;
  p->iJD = (sqlite3_int64)((X1 + X2 + D + B - 1524.5 ) * 86400000);
  p->validJD = 1;
  if( p->validHMS ){
    p->iJD += p->h*3600000 + p->m*60000 + (sqlite3_int64)(p->s*1000 + 0.5);
    if( p->validTZ ){
      p->iJD -= p->tz*60000;
      p->validYMD = 0;
      p->validHMS = 0;
      p->validTZ = 0;
    }
  }

      **
      ** Move the date to the same time on the next occurrence of
      ** weekday N where 0==Sunday, 1==Monday, and so forth.  If the
      ** date is already on the appropriate weekday, this is a no-op.
      */
      if( sqlite3_strnicmp(z, "weekday ", 8)==0
               && sqlite3AtoF(&z[8], &r, sqlite3Strlen30(&z[8]), SQLITE_UTF8)>0
               && r>=0.0 && r<7.0 && (n=(int)r)==r ){
        sqlite3_int64 Z;
        computeYMD_HMS(p);
        p->validTZ = 0;
        p->validJD = 0;
        computeJD(p);
        Z = ((p->iJD + 129600000)/86400000) % 7;
        if( Z>n ) Z -= 7;