}


  /* Commit */
  db_end_transaction(0);

  /* Do an autosync push, if requested */
  if( !isPrivate ) autosync(SYNC_PUSH);
}

/*
** Prepare a query that will list branches.
**
** If (which<0) then the query pulls only closed branches. If
** (which>0) then the query pulls all (closed and opened)

    g.markPrivate = 1;
  }

  /*
  ** Autosync if autosync is enabled and this is not a private check-in.
  */
  if( !g.markPrivate ){
    if( autosync(SYNC_PULL) ){
      blob_zero(&ans);
      prompt_user("continue in spite of sync failure (y/N)? ", &ans);
      cReply = blob_str(&ans)[0];
      if( cReply!='y' && cReply!='Y' ){
        fossil_exit(1);
      }
    }

  if( testRun ){
    db_end_transaction(1);
    exit(1);
  }
  db_end_transaction(0);

  if( !g.markPrivate ){
    autosync(SYNC_PUSH);
  }
  if( count_nonbranch_children(vid)>1 ){
    fossil_print("**** warning: a fork has occurred *****\n");
  }
}

**    --ssl-identity=filename    Use the SSL identity if requested by the server
**
** See also: init
*/
void clone_cmd(void){
  char *zPassword;
  const char *zDefaultUser;   /* Optional name of the default user */
  const char *zPw;            /* The user clone password */
  int nErr = 0;
  int bPrivate = 0;           /* Also clone private branches */

  if( find_option("private",0,0)!=0 ) bPrivate = SYNC_PRIVATE;
  url_proxy_options();
  if( g.argc < 4 ){
    usage("?OPTIONS? FILE-OR-URL NEW-REPOSITORY");
  }
  db_open_config(0);
  if( file_size(g.argv[3])>0 ){
    fossil_panic("file already exists: %s", g.argv[3]);

    db_multi_exec(
      "REPLACE INTO config(name,value,mtime)"
      " VALUES('server-code', lower(hex(randomblob(20))), now());"
    );
    url_enable_proxy(0);
    url_get_password_if_needed();
    g.xlinkClusterOnly = 1;
    nErr = client_sync(SYNC_CLONE | bPrivate,CONFIGSET_ALL,0);
    g.xlinkClusterOnly = 0;
    verify_cancel();
    db_end_transaction(0);
    db_close(1);
    if( nErr ){
      file_delete(g.argv[3]);
      fossil_fatal("server returned an error - clone aborted");

    url_parse(zServer);
    if( g.urlPasswd==0 && zPw ) g.urlPasswd = mprintf("%s", zPw);
    user_select();
    url_enable_proxy("via proxy: ");
    if( legacyFlag ) mask |= CONFIGSET_OLDFORMAT;
    if( overwriteFlag ) mask |= CONFIGSET_OVERWRITE;
    if( strncmp(zMethod, "push", n)==0 ){
      client_sync(0,0,(unsigned)mask);
    }else if( strncmp(zMethod, "pull", n)==0 ){
      client_sync(0,(unsigned)mask,0);
    }else{
      client_sync(0,(unsigned)mask,(unsigned)mask);
    }
  }else
  if( strncmp(zMethod, "reset", n)==0 ){
    int mask, i;
    char *zBackup;
    if( g.argc!=4 ) usage("reset AREA");
    mask = configure_name_to_mask(g.argv[3], 1);

  }

  /* Commit */
  db_end_transaction(0);
  
#if 0 /* Do an autosync push, if requested */
  /* arugable for JSON mode? */
  if( !g.isHTTP && !isPrivate ) autosync(SYNC_PUSH);
#endif
  return 0;
}


/*
** Impl of /json/branch/create.

**
** This file contains code used to push, pull, and sync a repository
*/
#include "config.h"
#include "sync.h"
#include <assert.h>










/*
** If the repository is configured for autosyncing, then do an
** autosync.  This will be a pull if the argument is true or a push
** if the argument is false.
**
** Return the number of errors.
*/
int autosync(int flags){
  const char *zUrl;
  const char *zAutosync;
  const char *zPw;
  int rc;
  int configSync = 0;       /* configuration changes transferred */
  if( g.fNoSync ){
    return 0;
  }
  if( flags==SYNC_PUSH && db_get_boolean("dont-push",0) ){
    return 0;
  }
  zAutosync = db_get("autosync", 0);
  if( zAutosync ){
    if( (flags & SYNC_PUSH)!=0 && memcmp(zAutosync,"pull",4)==0 ){
      return 0;   /* Do not auto-push when autosync=pullonly */
    }
    if( is_false(zAutosync) ){
      return 0;   /* Autosync is completely off */
    }
  }else{
    /* Autosync defaults on.  To make it default off, "return" here. */

    ** autosync, or something?
    */
    configSync = CONFIGSET_SHUN;
  }
#endif
  fossil_print("Autosync:  %s\n", g.urlCanonical);
  url_enable_proxy("via proxy: ");
  rc = client_sync(flags, configSync, 0);
  if( rc ) fossil_warning("Autosync failed");
  return rc;
}

/*
** This routine processes the command-line argument for push, pull,
** and sync.  If a command-line argument is given, that is the URL
** of a server to sync against.  If no argument is given, use the
** most recently synced URL.  Remember the current URL for next time.
*/
static void process_sync_args(unsigned *pConfigFlags, unsigned *pSyncFlags){
  const char *zUrl = 0;
  const char *zPw = 0;
  unsigned configSync = 0;
  int urlOptional = find_option("autourl",0,0)!=0;
  g.dontKeepUrl = find_option("once",0,0)!=0;
  if( find_option("private",0,0)!=0 ){
    *pSyncFlags |= SYNC_PRIVATE;
  }
  if( find_option("verbose","v",0)!=0 ){
    *pSyncFlags |= SYNC_VERBOSE;
  }
  url_proxy_options();
  db_find_and_open_repository(0, 0);
  db_open_config(0);
  if( g.argc==2 ){
    zUrl = db_get("last-sync-url", 0);
    zPw = unobscure(db_get("last-sync-pw", 0));
    if( db_get_boolean("auto-shun",1) ) configSync = CONFIGSET_SHUN;

  }
  if( !g.dontKeepUrl ){
    db_set("last-sync-url", g.urlCanonical, 0);
    if( g.urlPasswd ) db_set("last-sync-pw", obscure(g.urlPasswd), 0);
  }
  user_select();
  if( g.argc==2 ){
    if( ((*pSyncFlags) & (SYNC_PUSH|SYNC_PULL))==(SYNC_PUSH|SYNC_PULL) ){
      fossil_print("Sync with %s\n", g.urlCanonical);
    }else if( (*pSyncFlags) & SYNC_PUSH ){
      fossil_print("Push to %s\n", g.urlCanonical);
    }else if( (*pSyncFlags) & SYNC_PULL ){
      fossil_print("Pull from %s\n", g.urlCanonical);
    }
  }
  url_enable_proxy("via proxy: ");
  *pConfigFlags |= configSync;
}

/*
** COMMAND: pull
**
** Usage: %fossil pull ?URL? ?options?
**

**
** Use the --private option to pull private branches from the
** remote repository.
**
** See also: clone, push, sync, remote-url
*/
void pull_cmd(void){
  unsigned configFlags = 0;
  unsigned syncFlags = SYNC_PULL;

  process_sync_args(&configFlags, &syncFlags);
  client_sync(syncFlags, configFlags, 0);
}

/*
** COMMAND: push
**
** Usage: %fossil push ?URL? ?options?
**

**
** Use the --private option to push private branches to the
** remote repository.
**
** See also: clone, pull, sync, remote-url
*/
void push_cmd(void){
  unsigned configFlags = 0;
  unsigned syncFlags = SYNC_PUSH;

  process_sync_args(&configFlags, &syncFlags);
  if( db_get_boolean("dont-push",0) ){
    fossil_fatal("pushing is prohibited: the 'dont-push' option is set");
  }
  client_sync(syncFlags, 0, 0);
}


/*
** COMMAND: sync
**
** Usage: %fossil sync ?URL? ?options?

**
** Use the --private option to sync private branches with the
** remote repository.
**
** See also:  clone, push, pull, remote-url
*/
void sync_cmd(void){
  unsigned configFlags = 0;

  unsigned syncFlags = SYNC_PUSH|SYNC_PULL;
  process_sync_args(&configFlags, &syncFlags);
  if( db_get_boolean("dont-push",0) ) syncFlags &= ~SYNC_PUSH;
  client_sync(syncFlags, configFlags, 0);
  if( (syncFlags & SYNC_PUSH)==0 ){
    fossil_warning("pull only: the 'dont-push' option is set");
  }
}

/*
** COMMAND: remote-url
**

  debugFlag = find_option("debug",0,0)!=0;
  setmtimeFlag = find_option("setmtime",0,0)!=0;
  db_must_be_within_tree();
  vid = db_lget_int("checkout", 0);
  if( vid==0 ){
    fossil_fatal("cannot find current version");
  }
  if( !nochangeFlag && !internalUpdate ) autosync(SYNC_PULL);
  
  /* Create any empty directories now, as well as after the update,
  ** so changes in settings are reflected now */
  if( !nochangeFlag ) ensure_empty_dirs_created();

  if( internalUpdate ){
    tid = internalUpdate;

}

/*
** Format strings for progress reporting.
*/
static const char zLabelFormat[] = "%-10s %10s %10s %10s %10s\n";
static const char zValueFormat[] = "\r%-10s %10d %10d %10d %10d\n";
static const char zBriefFormat[] =
   "Round-trips: %d   Artifacts sent: %d  received: %d\r";

#if INTERFACE
/*
** Flag options for controlling client_sync()
*/
#define SYNC_PUSH      0x0001
#define SYNC_PULL      0x0002
#define SYNC_CLONE     0x0004
#define SYNC_PRIVATE   0x0008
#define SYNC_VERBOSE   0x0010
#endif

/*
** Sync to the host identified in g.urlName and g.urlPath.  This
** routine is called by the client.
**
** Records are pushed to the server if pushFlag is true.  Records
** are pulled if pullFlag is true.  A full sync occurs if both are
** true.
*/
int client_sync(


  unsigned syncFlags,     /* Mask of SYNC_* flags */

  unsigned configRcvMask, /* Receive these configuration items */
  unsigned configSendMask /* Send these configuration items */
){
  int go = 1;             /* Loop until zero */
  int nCardSent = 0;      /* Number of cards sent */
  int nCardRcvd = 0;      /* Number of cards received */
  int nCycle = 0;         /* Number of round trips to the server */
  int size;               /* Size of a config value */
  int origConfigRcvMask;  /* Original value of configRcvMask */

  Xfer xfer;              /* Transfer data */
  int pctDone;            /* Percentage done with a message */
  int lastPctDone = -1;   /* Last displayed pctDone */
  double rArrivalTime;    /* Time at which a message arrived */
  const char *zSCode = db_get("server-code", "x");
  const char *zPCode = db_get("project-code", 0);
  int nErr = 0;           /* Number of errors */
  int nRoundtrip= 0;      /* Number of HTTP requests */
  int nArtifactSent = 0;  /* Total artifacts sent */
  int nArtifactRcvd = 0;  /* Total artifacts received */
  const char *zOpType = 0;/* Push, Pull, Sync, Clone */

  if( db_get_boolean("dont-push", 0) ) syncFlags &= ~SYNC_PUSH;

  if( (syncFlags & (SYNC_PUSH|SYNC_PULL|SYNC_CLONE))==0 
     && configRcvMask==0 && configSendMask==0 ) return 0;

  transport_stats(0, 0, 1);
  socket_global_init();
  memset(&xfer, 0, sizeof(xfer));
  xfer.pIn = &recv;
  xfer.pOut = &send;
  xfer.mxSend = db_get_int("max-upload", 250000);
  if( syncFlags & SYNC_PRIVATE ){
    g.perm.Private = 1;
    xfer.syncPrivate = 1;
  }


  db_begin_transaction();
  db_record_repository_filename(0);
  db_multi_exec(
    "CREATE TEMP TABLE onremote(rid INTEGER PRIMARY KEY);"
  );
  blobarray_zero(xfer.aToken, count(xfer.aToken));
  blob_zero(&send);
  blob_zero(&recv);
  blob_zero(&xfer.err);
  blob_zero(&xfer.line);
  origConfigRcvMask = 0;


  /* Send the send-private pragma if we are trying to sync private data */
  if( syncFlags & SYNC_PRIVATE ){
    blob_append(&send, "pragma send-private\n", -1);
  }

  /*
  ** Always begin with a clone, pull, or push message
  */
  if( syncFlags & SYNC_CLONE ){
    blob_appendf(&send, "clone 3 %d\n", cloneSeqno);
    syncFlags &= ~(SYNC_PUSH|SYNC_PULL);

    nCardSent++;
    /* TBD: Request all transferable configuration values */
    content_enable_dephantomize(0);
    zOpType = "Clone";
  }else if( syncFlags & SYNC_PULL ){
    blob_appendf(&send, "pull %s %s\n", zSCode, zPCode);
    nCardSent++;
    zOpType = "Pull";
  }
  if( syncFlags & SYNC_PUSH ){
    blob_appendf(&send, "push %s %s\n", zSCode, zPCode);
    nCardSent++;
    if( (syncFlags & SYNC_PULL)==0 ) zOpType = "Push";
  }
  manifest_crosslink_begin();
  transport_global_startup();
  if( syncFlags & SYNC_VERBOSE ){
    fossil_print(zLabelFormat, "", "Bytes", "Cards", "Artifacts", "Deltas");
  }

  while( go ){
    int newPhantom = 0;
    char *zRandomness;

    /* Send make the most recently received cookie.  Let the server
    ** figure out if this is a cookie that it cares about.
    */
    zCookie = db_get("cookie", 0);
    if( zCookie ){
      blob_appendf(&send, "cookie %s\n", zCookie);
    }
    
    /* Generate gimme cards for phantoms and leaf cards
    ** for all leaves.
    */
    if( (syncFlags & SYNC_PULL)!=0
     || ((syncFlags & SYNC_CLONE)!=0 && cloneSeqno==1)
    ){
      request_phantoms(&xfer, mxPhantomReq);
    }
    if( syncFlags & SYNC_PUSH ){
      send_unsent(&xfer);
      nCardSent += send_unclustered(&xfer);
      if( syncFlags & SYNC_PRIVATE ) send_private(&xfer);
    }

    /* Send configuration parameter requests.  On a clone, delay sending
    ** this until the second cycle since the login card might fail on 
    ** the first cycle.
    */
    if( configRcvMask && ((syncFlags & SYNC_CLONE)==0 || nCycle>0) ){
      const char *zName;
      if( zOpType==0 ) zOpType = "Pull";
      zName = configure_first_name(configRcvMask);
      while( zName ){
        blob_appendf(&send, "reqconfig %s\n", zName);
        zName = configure_next_name(configRcvMask);
        nCardSent++;
      }
      if( (configRcvMask & (CONFIGSET_USER|CONFIGSET_TKT))!=0
       && (configRcvMask & CONFIGSET_OLDFORMAT)!=0
      ){
        int overwrite = (configRcvMask & CONFIGSET_OVERWRITE)!=0;
        configure_prepare_to_receive(overwrite);
      }
      origConfigRcvMask = configRcvMask;
      configRcvMask = 0;
    }

    /* Send configuration parameters being pushed */
    if( configSendMask ){
      if( zOpType==0 ) zOpType = "Push";
      if( configSendMask & CONFIGSET_OLDFORMAT ){
        const char *zName;
        zName = configure_first_name(configSendMask);
        while( zName ){
          send_legacy_config_card(&xfer, zName);
          zName = configure_next_name(configSendMask);
          nCardSent++;

    ** be unique.
    */
    zRandomness = db_text(0, "SELECT hex(randomblob(20))");
    blob_appendf(&send, "# %s\n", zRandomness);
    free(zRandomness);

    /* Exchange messages with the server */
    if( syncFlags & SYNC_VERBOSE ){
      fossil_print(zValueFormat, "Sent:",
                   blob_size(&send), nCardSent+xfer.nGimmeSent+xfer.nIGotSent,
                   xfer.nFileSent, xfer.nDeltaSent);
    }else{
      nRoundtrip++;
      nArtifactSent += xfer.nFileSent + xfer.nDeltaSent;
      fossil_print(zBriefFormat, nRoundtrip, nArtifactSent, nArtifactRcvd);
    }
    nCardSent = 0;
    nCardRcvd = 0;
    xfer.nFileSent = 0;
    xfer.nDeltaSent = 0;
    xfer.nGimmeSent = 0;
    xfer.nIGotSent = 0;
    if( syncFlags & SYNC_VERBOSE ){
      fossil_print("waiting for server...");
    }
    fflush(stdout);
    if( http_exchange(&send, &recv, (syncFlags & SYNC_CLONE)==0 || nCycle>0) ){
      nErr++;
      break;
    }
    lastPctDone = -1;
    blob_reset(&send);
    rArrivalTime = db_double(0.0, "SELECT julianday('now')");

    /* Send the send-private pragma if we are trying to sync private data */
    if( syncFlags & SYNC_PRIVATE ){
      blob_append(&send, "pragma send-private\n", -1);
    }

    /* Begin constructing the next message (which might never be
    ** sent) by beginning with the pull or push cards
    */
    if( syncFlags & SYNC_PULL ){
      blob_appendf(&send, "pull %s %s\n", zSCode, zPCode);
      nCardSent++;
    }
    if( syncFlags & SYNC_PUSH ){
      blob_appendf(&send, "push %s %s\n", zSCode, zPCode);
      nCardSent++;
    }
    go = 0;

    /* Process the reply that came back from the server */
    while( blob_line(&recv, &xfer.line) ){

          }
        }
        nCardRcvd++;
        continue;
      }
      xfer.nToken = blob_tokenize(&xfer.line, xfer.aToken, count(xfer.aToken));
      nCardRcvd++;
      if( (syncFlags & SYNC_VERBOSE)!=0 && recv.nUsed>0 ){
        pctDone = (recv.iCursor*100)/recv.nUsed;
        if( pctDone!=lastPctDone ){
          fossil_print("\rprocessed: %d%%         ", pctDone);
          lastPctDone = pctDone;
          fflush(stdout);
        }
      }

      /*   file UUID SIZE \n CONTENT
      **   file UUID DELTASRC SIZE \n CONTENT
      **
      ** Receive a file transmitted from the server.
      */
      if( blob_eq(&xfer.aToken[0],"file") ){
        xfer_accept_file(&xfer, (syncFlags & SYNC_CLONE)!=0);
        nArtifactRcvd++;
      }else

      /*   cfile UUID USIZE CSIZE \n CONTENT
      **   cfile UUID DELTASRC USIZE CSIZE \n CONTENT
      **
      ** Receive a compressed file transmitted from the server.
      */
      if( blob_eq(&xfer.aToken[0],"cfile") ){
        xfer_accept_compressed_file(&xfer);
        nArtifactRcvd++;
      }else

      /*   gimme UUID
      **
      ** Server is requesting a file.  If the file is a manifest, assume
      ** that the server will also want to know all of the content files
      ** associated with the manifest and send those too.
      */
      if( blob_eq(&xfer.aToken[0], "gimme")
       && xfer.nToken==2
       && blob_is_uuid(&xfer.aToken[1])
      ){
        if( syncFlags & SYNC_PUSH ){
          int rid = rid_from_uuid(&xfer.aToken[1], 0, 0);
          if( rid ) send_file(&xfer, rid, &xfer.aToken[1], 0);
        }
      }else
  
      /*   igot UUID  ?PRIVATEFLAG?
      **

        int rid;
        int isPriv = xfer.nToken>=3 && blob_eq(&xfer.aToken[2],"1");
        rid = rid_from_uuid(&xfer.aToken[1], 0, 0);
        if( rid>0 ){
          if( !isPriv ) content_make_public(rid);
        }else if( isPriv && !g.perm.Private ){
          /* ignore private files */
        }else if( (syncFlags & (SYNC_PULL|SYNC_CLONE))!=0 ){
          rid = content_new(blob_str(&xfer.aToken[1]), isPriv);
          if( rid ) newPhantom = 1;
        }
        remote_has(rid);
      }else
    
      
      /*   push  SERVERCODE  PRODUCTCODE
      **
      ** Should only happen in response to a clone.  This message tells
      ** the client what product to use for the new database.
      */
      if( blob_eq(&xfer.aToken[0],"push")
       && xfer.nToken==3
       && (syncFlags & SYNC_CLONE)!=0
       && blob_is_uuid(&xfer.aToken[1])
       && blob_is_uuid(&xfer.aToken[2])
      ){
        if( blob_eq_str(&xfer.aToken[1], zSCode, -1) ){
          fossil_fatal("server loop");
        }
        if( zPCode==0 ){

          && blob_is_int(&xfer.aToken[2], &size) ){
        const char *zName = blob_str(&xfer.aToken[1]);
        Blob content;
        blob_zero(&content);
        blob_extract(xfer.pIn, size, &content);
        g.perm.Admin = g.perm.RdAddr = 1;
        configure_receive(zName, &content, origConfigRcvMask);
        nCardRcvd++;
        nArtifactRcvd++;
        blob_reset(&content);
        blob_seek(xfer.pIn, 1, BLOB_SEEK_CUR);
      }else

      
      /*    cookie TEXT
      **

      **
      ** If the "login failed" message is seen, clear the sync password prior
      ** to the next cycle.
      */        
      if( blob_eq(&xfer.aToken[0],"message") && xfer.nToken==2 ){
        char *zMsg = blob_terminate(&xfer.aToken[1]);
        defossilize(zMsg);
        if( (syncFlags & SYNC_PUSH) && zMsg && strglob("pull only *", zMsg) ){
          syncFlags &= ~SYNC_PUSH;
          zMsg = 0;
        }
        fossil_print("\rServer says: %s\n", zMsg);
      }else

      /*    pragma NAME VALUE...
      **

      ** first message exchange because the project-code is unknown
      ** and so the login card on the request was invalid.  The project-code
      ** is returned in the reply before the error card, so second and 
      ** subsequent messages should be OK.  Nevertheless, we need to ignore
      ** the error card on the first message of a clone.
      */        
      if( blob_eq(&xfer.aToken[0],"error") && xfer.nToken==2 ){
        if( (syncFlags & SYNC_CLONE)==0 || nCycle>0 ){
          char *zMsg = blob_terminate(&xfer.aToken[1]);
          defossilize(zMsg);
          if( fossil_strcmp(zMsg, "login failed")==0 ){
            if( nCycle<2 ){
              if( !g.dontKeepUrl ) db_unset("last-sync-pw", 0);
              go = 1;
            }

    }
    if( (configRcvMask & (CONFIGSET_USER|CONFIGSET_TKT))!=0
     && (configRcvMask & CONFIGSET_OLDFORMAT)!=0
    ){
      configure_finalize_receive();
    }
    origConfigRcvMask = 0;
    if( nCardRcvd>0 && (syncFlags & SYNC_VERBOSE) ){
      fossil_print(zValueFormat, "Received:",
                   blob_size(&recv), nCardRcvd,
                   xfer.nFileRcvd, xfer.nDeltaRcvd + xfer.nDanglingFile);
    }else{
      fossil_print(zBriefFormat, nRoundtrip, nArtifactSent, nArtifactRcvd);
    }
    blob_reset(&recv);
    nCycle++;

    /* If we received one or more files on the previous exchange but
    ** there are still phantoms, then go another round.
    */
    nFileRecv = xfer.nFileRcvd + xfer.nDeltaRcvd + xfer.nDanglingFile;
    if( (nFileRecv>0 || newPhantom) && db_exists("SELECT 1 FROM phantom") ){
      go = 1;
      mxPhantomReq = nFileRecv*2;
      if( mxPhantomReq<200 ) mxPhantomReq = 200;
    }else if( (syncFlags & SYNC_CLONE)!=0 && nFileRecv>0 ){
      go = 1;
    }
    nCardRcvd = 0;
    xfer.nFileRcvd = 0;
    xfer.nDeltaRcvd = 0;
    xfer.nDanglingFile = 0;

    /* If we have one or more files queued to send, then go
    ** another round 
    */
    if( xfer.nFileSent+xfer.nDeltaSent>0 ){
      go = 1;
    }

    /* If this is a clone, the go at least two rounds */
    if( (syncFlags & SYNC_CLONE)!=0 && nCycle==1 ) go = 1;

    /* Stop the cycle if the server sends a "clone_seqno 0" card and
    ** we have gone at least two rounds.  Always go at least two rounds
    ** on a clone in order to be sure to retrieve the configuration
    ** information which is only sent on the second round.
    */
    if( cloneSeqno<=0 && nCycle>1 ) go = 0;   
  };
  transport_stats(&nSent, &nRcvd, 1);
  if( (syncFlags & SYNC_VERBOSE)==0 ) fossil_print("\n");
  fossil_print(
     "%s finished with %lld bytes sent, %lld bytes received\n",
     zOpType, nSent, nRcvd);
  transport_close();
  transport_global_shutdown();
  db_multi_exec("DROP TABLE onremote");
  manifest_crosslink_end();
  content_enable_dephantomize(1);
  db_end_transaction(0);
  return nErr;
}