** the number of errors.
*/
static int scan_file(const char *zName, const char *zContent){
  const char *z;
  int ln = 0;
  int szToken;
  int eToken;
  const char *zPrev = 0;
  int ePrev = 0;
  int szPrev = 0;
  int lnPrev = 0;
  int nCurly = 0;
  int x;
  unsigned fmtFlags = 0;
  int nErr = 0;

  if( zContent==0 ){
    printf("cannot read file: %s\n", zName);

endif

#### The directories where the OpenSSL include and library files are located.
#    The recommended usage here is to use the Sysinternals junction tool
#    to create a hard link between an "openssl-1.x" sub-directory of the
#    Fossil source code directory and the target OpenSSL source directory.
#
OPENSSLDIR = $(SRCDIR)/../compat/openssl-1.0.2l
OPENSSLINCDIR = $(OPENSSLDIR)/include
OPENSSLLIBDIR = $(OPENSSLDIR)

#### Either the directory where the Tcl library is installed or the Tcl
#    source code directory resides (depending on the value of the macro
#    FOSSIL_TCL_SOURCE).  If this points to the Tcl install directory,
#    this directory must have "include" and "lib" sub-directories.  If

# Enable support for the SQLite Encryption Extension?
!ifndef USE_SEE
USE_SEE = 0
!endif

!if $(FOSSIL_ENABLE_SSL)!=0
SSLDIR    = $(B)\compat\openssl-1.0.2l
SSLINCDIR = $(SSLDIR)\inc32
!if $(FOSSIL_DYNAMIC_BUILD)!=0
SSLLIBDIR = $(SSLDIR)\out32dll
!else
SSLLIBDIR = $(SSLDIR)\out32
!endif
SSLLFLAGS = /nologo /opt:ref /debug

# Markdown Overview #

## Paragraphs ##

> Paragraphs are divided by blank lines.
> End a line with two or more spaces to force a mid-paragraph line break.

## Headings ##

>
    # Top-level Heading                         Alternative Top Level Heading
    # Top-level Heading Variant #               =============================

#include <stdio.h>
#include <string.h>
#include <stdlib.h>

int main(int argc, char *argv[]){
    FILE *m,*u,*v;
    char *z;
#if defined(__DMC__)            /* e.g. 0x857 */
    int i = 0;
#endif
    int j = 0, x = 0, d = 0;
    int vn[3];
    char b[1000];
    char vx[1000];
    memset(b,0,sizeof(b));
    memset(vx,0,sizeof(vx));
    u = fopen(argv[1],"r");
    if( fgets(b, sizeof(b)-1,u)==0 ){

      fprintf(stderr, "malformed VERSION file: %s\n", argv[3]);
      exit(1);
    }
    fclose(v);
    for(z=b; z[0] && z[0]!='\r' && z[0]!='\n'; z++){}
    *z = 0;
    printf("#define RELEASE_VERSION \"%s\"\n", b);


    z=b;
    vn[0] = vn[1] = vn[2] = 0;
    while(1){
      if( z[0]>='0' && z[0]<='9' ){
        x = x*10 + z[0] - '0';
      }else{
        if( j<3 ) vn[j++] = x;
        x = 0;
        if( z[0]==0 ) break;
      }
      z++;
    }
    for(z=vx; z[0]=='0'; z++){}
    printf("#define RELEASE_VERSION_NUMBER %d%02d%02d\n", vn[0], vn[1], vn[2]);
    memset(vx,0,sizeof(vx));
    strcpy(vx,b);

    for(z=vx; z[0]; z++){
      if( z[0]=='-' ){
        z[0] = 0;
        break;
      }
      if( z[0]!='.' ) continue;
      if ( d<3 ){

  entry_attribute("Delay in milliseconds before enabling hyperlinks", 5,
                  "auto-hyperlink-delay", "ah-delay", "10", 0);
  @ </blockquote>
  @ <p>Hyperlinks for user "nobody" are normally enabled as soon as the page
  @ finishes loading.  But the first check-box below can be set to require mouse
  @ movement before enabling the links. One can also set a delay prior to enabling
  @ links by enter a positive number of milliseconds in the entry box above.</p>
  @ (Properties: "auto-hyperlink", "auto-hyperlink-ishuman",
  @ "auto-hyperlink-mouseover", and "auto-hyperlink-delay")</p>

  @ <hr />
  onoff_attribute("Require a CAPTCHA if not logged in",
                  "require-captcha", "reqcapt", 1, 0);
  @ <p>Require a CAPTCHA for edit operations (appending, creating, or
  @ editing wiki or tickets or adding attachments to wiki or tickets)

  @ </div></form>
  @ <hr />
  @ <b>Ad-Unit Notes:</b><ul>
  @ <li>Leave both Ad-Units blank to disable all advertising.
  @ <li>The "Banner Ad-Unit" is used for wide pages.
  @ <li>The "Right-Column Ad-Unit" is used on pages with tall, narrow content.
  @ <li>If the "Right-Column Ad-Unit" is blank, the "Banner Ad-Unit" is used on all pages.
  @ <li>Properties: "adunit", "adunit-right", "adunit-omit-if-admin", and
  @     "adunit-omit-if-user".
  @ <li>Suggested <a href="setup_skinedit?w=0">CSS</a> changes:
  @ <blockquote><pre>
  @ div.adunit_banner {
  @   margin: auto;
  @   width: 100%%;
  @ }

endif

#### The directories where the OpenSSL include and library files are located.
#    The recommended usage here is to use the Sysinternals junction tool
#    to create a hard link between an "openssl-1.x" sub-directory of the
#    Fossil source code directory and the target OpenSSL source directory.
#
OPENSSLDIR = $(SRCDIR)/../compat/openssl-1.0.2l
OPENSSLINCDIR = $(OPENSSLDIR)/include
OPENSSLLIBDIR = $(OPENSSLDIR)

#### Either the directory where the Tcl library is installed or the Tcl
#    source code directory resides (depending on the value of the macro
#    FOSSIL_TCL_SOURCE).  If this points to the Tcl install directory,
#    this directory must have "include" and "lib" sub-directories.  If

endif

#### The directories where the OpenSSL include and library files are located.
#    The recommended usage here is to use the Sysinternals junction tool
#    to create a hard link between an "openssl-1.x" sub-directory of the
#    Fossil source code directory and the target OpenSSL source directory.
#
OPENSSLDIR = $(SRCDIR)/../compat/openssl-1.0.2l
OPENSSLINCDIR = $(OPENSSLDIR)/include
OPENSSLLIBDIR = $(OPENSSLDIR)

#### Either the directory where the Tcl library is installed or the Tcl
#    source code directory resides (depending on the value of the macro
#    FOSSIL_TCL_SOURCE).  If this points to the Tcl install directory,
#    this directory must have "include" and "lib" sub-directories.  If

# Enable support for the SQLite Encryption Extension?
!ifndef USE_SEE
USE_SEE = 0
!endif

!if $(FOSSIL_ENABLE_SSL)!=0
SSLDIR    = $(B)\compat\openssl-1.0.2l
SSLINCDIR = $(SSLDIR)\inc32
!if $(FOSSIL_DYNAMIC_BUILD)!=0
SSLLIBDIR = $(SSLDIR)\out32dll
!else
SSLLIBDIR = $(SSLDIR)\out32
!endif
SSLLFLAGS = /nologo /opt:ref /debug

file "<b>win\buildmsvc.bat</b>" may be used and it will attempt to
detect and use the latest installed version of MSVC.<br><br>To enable
the optional <a href="https://www.openssl.org/">OpenSSL</a> support,
first <a href="https://www.openssl.org/source/">download the official
source code for OpenSSL</a> and extract it to an appropriately named
"<b>openssl-X.Y.ZA</b>" subdirectory within the local
[/tree?ci=trunk&name=compat | compat] directory (e.g.
"<b>compat/openssl-1.0.2l</b>"), then make sure that some recent
<a href="http://www.perl.org/">Perl</a> binaries are installed locally,
and finally run one of the following commands:
<blockquote><pre>
nmake /f Makefile.msc FOSSIL_ENABLE_SSL=1 FOSSIL_BUILD_SSL=1 PERLDIR=C:\full\path\to\Perl\bin
</pre></blockquote>
<blockquote><pre>
buildmsvc.bat FOSSIL_ENABLE_SSL=1 FOSSIL_BUILD_SSL=1 PERLDIR=C:\full\path\to\Perl\bin