@ should <a href="takeitprivate">take this repository private</a>
    @ and/or disable self-registration
    @ immediately!  Or, at least remove the Setup and Admin privileges
    @ from the default permissions for new users.
  }else if( hasAnyCap(zAnonCap,"y") ){
    @ <li><p>This repository is <big><b>INSECURE</b></big> because
    @ it allows anonymous users to push unversioned files.
    @ <p>Fix this by <a href="takeitprivate">taking the repository private</a>
    @ Fix this by <a href="takeitprivate">taking the repository private</a>
    @ or by removing the "y" permission from users "anonymous" and
    @ "nobody" on the <a href="setup_ulist">User Configuration</a> page.
  }else if( hasAnyCap(zSelfCap,"y") ){
    @ <li><p>This repository is <big><b>INSECURE</b></big> because
    @ it allows self-registered users to push unversioned files.
    @ <p>Fix this by <a href="takeitprivate">taking the repository private</a>
    @ Fix this by <a href="takeitprivate">taking the repository private</a>
    @ or by removing the "y" permission from the default permissions or
    @ by disabling self-registration.
  }else if( hasAnyCap(zAnonCap,"goz") ){
    @ <li><p>This repository is <big><b>PUBLIC</b></big>. All
    @ checked-in content can be accessed by anonymous users.
    @ <a href="takeitprivate">Take it private</a>.<p>
  }else if( hasAnyCap(zSelfCap,"goz") && hasSelfReg ){

  /* Make sure the HTTPS is required for login, at least, so that the
  ** password does not go across the Internet in the clear.
  */
  if( db_get_int("redirect-to-https",0)==0 ){
    @ <li><p><b>WARNING:</b>
    @ Sensitive material such as login passwords can be sent over an
    @ unencrypted connection.
    @ <p>Fix this by changing the "Redirect to HTTPS" setting on the
    @ Fix this by changing the "Redirect to HTTPS" setting on the
    @ <a href="setup_access">Access Control</a> page. If you were using
    @ the old "Redirect to HTTPS on Login Page" setting, switch to the
    @ new setting: it has a more secure implementation.
  }

#ifdef FOSSIL_ENABLE_TH1_DOCS
  /* The use of embedded TH1 is dangerous.  Warn if it is possible.

  /* Anonymous users should not be able to harvest email addresses
  ** from tickets.
  */
  if( hasAnyCap(zAnonCap, "e") ){
    @ <li><p><b>WARNING:</b>
    @ Anonymous users can view email addresses and other personally
    @ identifiable information on tickets.
    @ <p>Fix this by removing the "Email" privilege
    @ Fix this by removing the "Email" privilege
    @ (<a href="setup_ucap_list">capability "e"</a>) from users
    @ "anonymous" and "nobody" on the
    @ <a href="setup_ulist">User Configuration</a> page.
  }

  /* Anonymous users probably should not be allowed to push content
  ** to the repository.
  */
  if( hasAnyCap(zAnonCap, "i") ){
    @ <li><p><b>WARNING:</b>
    @ Anonymous users can push new check-ins into the repository.
    @ <p>Fix this by removing the "Check-in" privilege
    @ Fix this by removing the "Check-in" privilege
    @ (<a href="setup_ucap_list">capability</a> "i") from users
    @ "anonymous" and "nobody" on the
    @ <a href="setup_ulist">User Configuration</a> page.
  }

  /* Anonymous users probably should not be allowed act as moderators
  ** for wiki or tickets.
  */
  if( hasAnyCap(zAnonCap, "lq5") ){
    @ <li><p><b>WARNING:</b>
    @ Anonymous users can act as moderators for wiki, tickets, or 
    @ forum posts. This defeats the whole purpose of moderation.
    @ <p>Fix this by removing the "Mod-Wiki", "Mod-Tkt", and "Mod-Forum"
    @ Fix this by removing the "Mod-Wiki", "Mod-Tkt", and "Mod-Forum"
    @ privileges (<a href="%R/setup_ucap_list">capabilities</a> "fq5")
    @ from users "anonymous" and "nobody"
    @ on the <a href="setup_ulist">User Configuration</a> page.
  }

  /* Check to see if any TH1 scripts are configured to run on a sync
  */

      @ <p><b>Caution:</b>
      @ The "Write-Unver" privilege ('y') is granted to an excessive
      @ number of users (%d(n)).
      @ Ideally, the Write-Unver privilege should only
      @ be granted to one or two users.
    }
  }

  /* Providing hyperlink capability to user "nobody" can lead to robots
  ** making excessive requests resulting in DoS
  */
  if( db_exists("SELECT 1 FROM user WHERE login='nobody' AND cap GLOB '*h*'") ){
    int nobodyId = db_int(0,"SELECT uid FROM user WHERE login='nobody'");
    int anonId = db_int(0,
      "SELECT uid FROM user WHERE login='anonymous' AND cap NOT GLOB '*h*'");
    @ <li><p>
    @ User "nobody" has "Hyperlink" privilege ('h') which can lead to
    @ robots walking a nearly endless progression of pages on public-facing
    @ repositories, causing excessive server load and possible DoS.
    @ Suggested remediation:
    @ <ol type="a">
    @ <li>Remove the 'h' privilege from the
    @     <a href="%R/setup_uedit?id=%d(nobodyId)">'nobody' user</a> so that
    @     robots cannot see hyperlinks.
    @ <li>Activate <a href="%R/setup_access#autoh">autohyperlink</a> so that
    @     human readers can still see hyperlinks even if they are not logged in.
    @     Require mouse movement before enabling hyperlinks and set the
    @     delay to at least 50 milliseconds.
    if( anonId>0 ){
      @ <li>Perhaps set the 'h' privilege on the
      @     <a href="%R/setup_uedit?id=%d(anonId)">'anonymous' user</a> so
      @     that humans that have javascript disabled in their browsers can
      @     still see hyperlinks if they will log in as "anonymous".
    }
    @ </ol>
  }

  /* Notify if REMOTE_USER or HTTP_AUTHENTICATION is used for login.
  */
  if( db_get_boolean("remote_user_ok", 0) ){
    @ <li><p>
    @ <li><p><b>Caution:</b>
    @ This repository trusts that the REMOTE_USER environment variable set
    @ up by the webserver contains the name of an authenticated user.
    @ Fossil's built-in authentication mechanism is bypassed.
    @ <p>Fix this by deactivating the "Allow REMOTE_USER authentication"
    @ Fix this by deactivating the "Allow REMOTE_USER authentication"
    @ checkbox on the <a href="setup_access">Access Control</a> page.
  }
  if( db_get_boolean("http_authentication_ok", 0) ){
    @ <li><p>
    @ <li><p><b>Caution:</b>
    @ This repository trusts that the HTTP_AUTHENITICATION environment
    @ variable set up by the webserver contains the name of an
    @ authenticated user.
    @ Fossil's built-in authentication mechanism is bypassed.
    @ <p>Fix this by deactivating the "Allow HTTP_AUTHENTICATION authentication"
    @ Fix this by deactivating the "Allow HTTP_AUTHENTICATION authentication"
    @ checkbox on the <a href="setup_access">Access Control</a> page.
  }

  /* Logging should be turned on
  */
  if( db_get_boolean("access-log",0)==0 ){
    @ <li><p>

#if !defined(_WIN32) && !defined(FOSSIL_OMIT_LOAD_AVERAGE)
  /* Make sure that the load-average limiter is armed and working */
  if( load_average()==0.0 ){
    @ <li><p>
    @ Unable to get the system load average.  This can prevent Fossil
    @ from throttling expensive operations during peak demand.
    @ <p>If running in a chroot jail on Linux, verify that the /proc
    @ If running in a chroot jail on Linux, verify that the /proc
    @ filesystem is mounted within the jail, so that the load average
    @ can be obtained from the /proc/loadavg file.
  }else {
    double r = atof(db_get("max-loadavg", 0));
    if( r<=0.0 ){
      @ <li><p>
      @ Load average limiting is turned off.  This can cause the server
      @ to bog down if many requests for expensive services (such as
      @ large diffs or tarballs) arrive at about the same time.
      @ <p>To fix this, set the "Server Load Average Limit" on the
      @ To fix this, set the "Server Load Average Limit" on the
      @ <a href="setup_access">Access Control</a> page to approximately
      @ the number of available cores on your server, or maybe just a little
      @ less.
    }else if( r>=8.0 ){
      @ <li><p>
      @ The "Server Load Average Limit" on the
      @ <a href="setup_access">Access Control</a> page is set to %g(r),