#define BUG_SSH2_HMAC                             2
#define BUG_NEEDS_SSH1_PLAIN_PASSWORD        	  4
#define BUG_CHOKES_ON_RSA	        	  8
#define BUG_SSH2_RSA_PADDING	        	 16
#define BUG_SSH2_DERIVEKEY                       32
#define BUG_SSH2_REKEY                           64
#define BUG_SSH2_PK_SESSIONID                   128

/*
 * Codes for terminal modes.
 * Most of these are the same in SSH-1 and SSH-2.
 * This list is derived from draft-ietf-secsh-connect-25 and
 * SSH-1 RFC-1.2.31.
 */
static const struct {
    const char* const mode;
    int opcode;
    enum { TTY_OP_CHAR, TTY_OP_BOOL } type;
} ssh_ttymodes[] = {
    /* "V" prefix discarded for special characters relative to SSH specs */
    { "INTR",	      1, TTY_OP_CHAR },
    { "QUIT",	      2, TTY_OP_CHAR },
    { "ERASE",	      3, TTY_OP_CHAR },
    { "KILL",	      4, TTY_OP_CHAR },
    { "EOF",	      5, TTY_OP_CHAR },
    { "EOL",	      6, TTY_OP_CHAR },
    { "EOL2",	      7, TTY_OP_CHAR },
    { "START",	      8, TTY_OP_CHAR },
    { "STOP",	      9, TTY_OP_CHAR },
    { "SUSP",	     10, TTY_OP_CHAR },
    { "DSUSP",	     11, TTY_OP_CHAR },
    { "REPRINT",     12, TTY_OP_CHAR },
    { "WERASE",	     13, TTY_OP_CHAR },
    { "LNEXT",	     14, TTY_OP_CHAR },
    { "FLUSH",	     15, TTY_OP_CHAR },
    { "SWTCH",	     16, TTY_OP_CHAR },
    { "STATUS",	     17, TTY_OP_CHAR },
    { "DISCARD",     18, TTY_OP_CHAR },
    { "IGNPAR",	     30, TTY_OP_BOOL },
    { "PARMRK",	     31, TTY_OP_BOOL },
    { "INPCK",	     32, TTY_OP_BOOL },
    { "ISTRIP",	     33, TTY_OP_BOOL },
    { "INLCR",	     34, TTY_OP_BOOL },
    { "IGNCR",	     35, TTY_OP_BOOL },
    { "ICRNL",	     36, TTY_OP_BOOL },
    { "IUCLC",	     37, TTY_OP_BOOL },
    { "IXON",	     38, TTY_OP_BOOL },
    { "IXANY",	     39, TTY_OP_BOOL },
    { "IXOFF",	     40, TTY_OP_BOOL },
    { "IMAXBEL",     41, TTY_OP_BOOL },
    { "ISIG",	     50, TTY_OP_BOOL },
    { "ICANON",	     51, TTY_OP_BOOL },
    { "XCASE",	     52, TTY_OP_BOOL },
    { "ECHO",	     53, TTY_OP_BOOL },
    { "ECHOE",	     54, TTY_OP_BOOL },
    { "ECHOK",	     55, TTY_OP_BOOL },
    { "ECHONL",	     56, TTY_OP_BOOL },
    { "NOFLSH",	     57, TTY_OP_BOOL },
    { "TOSTOP",	     58, TTY_OP_BOOL },
    { "IEXTEN",	     59, TTY_OP_BOOL },
    { "ECHOCTL",     60, TTY_OP_BOOL },
    { "ECHOKE",	     61, TTY_OP_BOOL },
    { "PENDIN",	     62, TTY_OP_BOOL }, /* XXX is this a real mode? */
    { "OPOST",	     70, TTY_OP_BOOL },
    { "OLCUC",	     71, TTY_OP_BOOL },
    { "ONLCR",	     72, TTY_OP_BOOL },
    { "OCRNL",	     73, TTY_OP_BOOL },
    { "ONOCR",	     74, TTY_OP_BOOL },
    { "ONLRET",	     75, TTY_OP_BOOL },
    { "CS7",	     90, TTY_OP_BOOL },
    { "CS8",	     91, TTY_OP_BOOL },
    { "PARENB",	     92, TTY_OP_BOOL },
    { "PARODD",	     93, TTY_OP_BOOL }
};

/* Miscellaneous other tty-related constants. */
#define SSH_TTY_OP_END		  0
/* The opcodes for ISPEED/OSPEED differ between SSH-1 and SSH-2. */
#define SSH1_TTY_OP_ISPEED	192
#define SSH1_TTY_OP_OSPEED	193
#define SSH2_TTY_OP_ISPEED	128
#define SSH2_TTY_OP_OSPEED	129

/* Helper functions for parsing tty-related config. */
static unsigned int ssh_tty_parse_specchar(char *s)
{
    unsigned int ret;
    if (*s) {
	char *next = NULL;
	ret = ctrlparse(s, &next);
	if (!next) ret = s[0];
    } else {
	ret = 255; /* special value meaning "don't set" */
    }
    return ret;
}
static unsigned int ssh_tty_parse_boolean(char *s)
{
    if (stricmp(s, "yes") == 0 ||
	stricmp(s, "on") == 0 ||
	stricmp(s, "true") == 0 ||
	stricmp(s, "+") == 0)
	return 1; /* true */
    else if (stricmp(s, "no") == 0 ||
	     stricmp(s, "off") == 0 ||
	     stricmp(s, "false") == 0 ||
	     stricmp(s, "-") == 0)
	return 0; /* false */
    else
	return (atoi(s) != 0);
}

#define translate(x) if (type == x) return #x
#define translatec(x,ctx) if (type == x && (pkt_ctx & ctx)) return #x
static char *ssh1_pkt_type(int type)
{
    translate(SSH1_MSG_DISCONNECT);
    translate(SSH1_SMSG_PUBLIC_KEY);

	pkt->logmode = blanktype;
}

static void end_log_omission(Ssh ssh, struct Packet *pkt)
{
    pkt->logmode = PKTLOG_EMIT;
}

/* Helper function for common bits of parsing cfg.ttymodes. */
static void parse_ttymodes(Ssh ssh, char *modes,
			   void (*do_mode)(void *data, char *mode, char *val),
			   void *data)
{
    while (*modes) {
	char *t = strchr(modes, '\t');
	char *m = snewn(t-modes+1, char);
	char *val;
	strncpy(m, modes, t-modes);
	m[t-modes] = '\0';
	if (*(t+1) == 'A')
	    val = get_ttymode(ssh->frontend, m);
	else
	    val = dupstr(t+2);
	if (val)
	    do_mode(data, m, val);
	sfree(m);
	sfree(val);
	modes += strlen(modes) + 1;
    }
}

static int ssh_channelcmp(void *av, void *bv)
{
    struct ssh_channel *a = (struct ssh_channel *) av;
    struct ssh_channel *b = (struct ssh_channel *) bv;
    if (a->localid < b->localid)
	return -1;

     * session which we might mistake for another
     * encrypted packet, we close the session once
     * we've sent EXIT_CONFIRMATION.
     */
    ssh->close_expected = TRUE;
    ssh_closing((Plug)ssh, NULL, 0, 0);
}

/* Helper function to deal with sending tty modes for REQUEST_PTY */
static void ssh1_send_ttymode(void *data, char *mode, char *val)
{
    struct Packet *pktout = (struct Packet *)data;
    int i = 0;
    unsigned int arg = 0;
    while (strcmp(mode, ssh_ttymodes[i].mode) != 0) i++;
    if (i == lenof(ssh_ttymodes)) return;
    switch (ssh_ttymodes[i].type) {
      case TTY_OP_CHAR:
	arg = ssh_tty_parse_specchar(val);
	break;
      case TTY_OP_BOOL:
	arg = ssh_tty_parse_boolean(val);
	break;
    }
    ssh2_pkt_addbyte(pktout, ssh_ttymodes[i].opcode);
    ssh2_pkt_addbyte(pktout, arg);
}


static void do_ssh1_connection(Ssh ssh, unsigned char *in, int inlen,
			       struct Packet *pktin)
{
    crBegin(ssh->do_ssh1_connection_crstate);

    ssh->packet_dispatch[SSH1_SMSG_STDOUT_DATA] = 

	}
    }

    ssh_setup_portfwd(ssh, &ssh->cfg);
    ssh->packet_dispatch[SSH1_MSG_PORT_OPEN] = ssh1_msg_port_open;

    if (!ssh->cfg.nopty) {
	struct Packet *pkt;
	/* Unpick the terminal-speed string. */
	/* XXX perhaps we should allow no speeds to be sent. */
	ssh->ospeed = 38400; ssh->ispeed = 38400; /* last-resort defaults */
	sscanf(ssh->cfg.termspeed, "%d,%d", &ssh->ospeed, &ssh->ispeed);
	/* Send the pty request. */
	send_packet(ssh, SSH1_CMSG_REQUEST_PTY,
		    PKT_STR, ssh->cfg.termtype,
		    PKT_INT, ssh->term_height,
		    PKT_INT, ssh->term_width,
		    PKT_INT, 0, PKT_INT, 0, /* width,height in pixels */
		    PKT_CHAR, 192, PKT_INT, ssh->ispeed, /* TTY_OP_ISPEED */
		    PKT_CHAR, 193, PKT_INT, ssh->ospeed, /* TTY_OP_OSPEED */
		    PKT_CHAR, 0, PKT_END);
	pkt = ssh1_pkt_init(SSH1_CMSG_REQUEST_PTY);
	ssh_pkt_addstring(pkt, ssh->cfg.termtype);
	ssh_pkt_adduint32(pkt, ssh->term_height);
	ssh_pkt_adduint32(pkt, ssh->term_width);
	ssh_pkt_adduint32(pkt, 0); /* width in pixels */
	ssh_pkt_adduint32(pkt, 0); /* height in pixels */
	parse_ttymodes(ssh, ssh->cfg.ttymodes,
		       ssh1_send_ttymode, (void *)pkt);
	ssh_pkt_addbyte(pkt, SSH1_TTY_OP_ISPEED);
	ssh_pkt_adduint32(pkt, ssh->ispeed);
	ssh_pkt_addbyte(pkt, SSH1_TTY_OP_OSPEED);
	ssh_pkt_adduint32(pkt, ssh->ospeed);
	ssh_pkt_addbyte(pkt, SSH_TTY_OP_END);
	s_wrpkt(ssh, pkt);
	ssh->state = SSH_STATE_INTERMED;
	do {
	    crReturnV;
	} while (!pktin);
	if (pktin->type != SSH1_SMSG_SUCCESS
	    && pktin->type != SSH1_SMSG_FAILURE) {
	    bombout(("Protocol confusion"));

	ssh2_pkt_adduint32(pktout, c->remoteid);
	ssh2_pkt_adduint32(pktout, c->localid);
	ssh2_pkt_adduint32(pktout, c->v.v2.locwindow);
	ssh2_pkt_adduint32(pktout, OUR_V2_MAXPKT);	/* our max pkt size */
	ssh2_pkt_send(ssh, pktout);
    }
}

/* Helper function to deal with sending tty modes for "pty-req" */
static void ssh2_send_ttymode(void *data, char *mode, char *val)
{
    struct Packet *pktout = (struct Packet *)data;
    int i = 0;
    unsigned int arg = 0;
    while (strcmp(mode, ssh_ttymodes[i].mode) != 0) i++;
    if (i == lenof(ssh_ttymodes)) return;
    switch (ssh_ttymodes[i].type) {
      case TTY_OP_CHAR:
	arg = ssh_tty_parse_specchar(val);
	break;
      case TTY_OP_BOOL:
	arg = ssh_tty_parse_boolean(val);
	break;
    }
    ssh2_pkt_addbyte(pktout, ssh_ttymodes[i].opcode);
    ssh2_pkt_adduint32(pktout, arg);
}

/*
 * Handle the SSH-2 userauth and connection layers.
 */
static void do_ssh2_authconn(Ssh ssh, unsigned char *in, int inlen,
			     struct Packet *pktin)
{

	ssh2_pkt_addbool(s->pktout, 1);	       /* want reply */
	ssh2_pkt_addstring(s->pktout, ssh->cfg.termtype);
	ssh2_pkt_adduint32(s->pktout, ssh->term_width);
	ssh2_pkt_adduint32(s->pktout, ssh->term_height);
	ssh2_pkt_adduint32(s->pktout, 0);	       /* pixel width */
	ssh2_pkt_adduint32(s->pktout, 0);	       /* pixel height */
	ssh2_pkt_addstring_start(s->pktout);
	parse_ttymodes(ssh, ssh->cfg.ttymodes,
		       ssh2_send_ttymode, (void *)s->pktout);
	ssh2_pkt_addbyte(s->pktout, 128);	       /* TTY_OP_ISPEED */
	ssh2_pkt_addbyte(s->pktout, SSH2_TTY_OP_ISPEED);
	ssh2_pkt_adduint32(s->pktout, ssh->ispeed);
	ssh2_pkt_addbyte(s->pktout, 129);	       /* TTY_OP_OSPEED */
	ssh2_pkt_addbyte(s->pktout, SSH2_TTY_OP_OSPEED);
	ssh2_pkt_adduint32(s->pktout, ssh->ospeed);
	ssh2_pkt_addstring_data(s->pktout, "\0", 1); /* TTY_OP_END */
	ssh2_pkt_send(ssh, s->pktout);
	ssh->state = SSH_STATE_INTERMED;

	crWaitUntilV(pktin);