# |-------+-------+-------+-------+-------+-------+--------|
# | P1-17 | P1-18 | P1-21 | P1-19 | P1-23 | P1-24 | P1-25  |
# -________________________________________________________-
#                     Raspberry Pi

import spidev
import time
import threading

class dummy_context_mgr():
	def __enter__(self):
		return None
	def __exit__(self, exc_type, exc_value, traceback):
		return False

class Radio:
	_register_map = [
		{'name': "Unknown"}, # 0
		{'name': "Unknown"}, # 1
		{'name': "Unknown"}, # 2
		{                    # 3

		}
	]

	def __init__(self, spi_bus, spi_dev, config = None):
		spi = spidev.SpiDev()
		spi.open(spi_bus, spi_dev)
		self._spi = spi

		self._dequeue_thread = None
		self._syncword = None

		self.configure(config)

		if len(self._register_map) != 53:
			raise ValueError('Inconsistent register map!')

		self._channel_queue = {}

		return None

	def __del__(self):
		self._spi.close()

	def _debug(self, message):
		if self._config is not None and 'debug_log_command' in self._config:
			self._config['debug_log_command'](message)
		return None

	def _get_mutex(self, real_mutex = True):
		if not real_mutex:
			return dummy_context_mgr()

		mutex = self._config.get('mutex', dummy_context_mgr())
		return mutex

	def _reset_device(self):
		reset_command = self._config.get('reset_command', None)
		if self._config is not None:
			if self._config['reset_command'] is not None:
				return self._config['reset_command']()
		return None

		if reset_command is None:
			return None

		reset_command()

		return None

	def _should_use_queue(self):
		if 'use_software_tx_queue' in self._config:
			return self._config['use_software_tx_queue']

		return False

	def _register_name(self, reg_number):
		return self._register_map[reg_number]['name']

	def _register_number(self, reg_string):
		reg_string_orig = reg_string

		self.put_register_bits('vco_calibrate', {'enabled': 1})
		self.put_register_bits('scan_rssi_state', {'enabled': 0, 'channel_offset': 0, 'wait_time': 15})

		return True

	def _put_register_high_low(self, reg, high, low, delay = 7):
		reg = self._register_number(reg)

		result = self._spi.xfer([reg, high, low], self._spi.max_speed_hz, delay)

		if reg & 0x80 == 0x80:
			self._debug(" regRead[%02X] = %s" % ((reg & 0x7f), result))
		else:
			self._debug("regWrite[%02X:0x%02X%02X] = %s" % (reg, high, low, result))

			key_value = (value & mask) >> bit_range[0]
			result[key] = key_value

		# Return the filled in structure
		return result

	def configure(self, config):
		if config is None:
		self._config = config
			config = {}

		if config is None:
		self._config = config
			return None

		with self._get_mutex():
		self._spi.max_speed_hz = self._config.get('frequency', 4000000)
		self._spi.bits_per_word = self._config.get('bits_per_word', 8)
		self._spi.cshigh = self._config.get('csigh', False)
		self._spi.no_cs  = self._config.get('no_cs', False)
		self._spi.lsbfirst = self._config.get('lsbfirst', False)
		self._spi.threewire = self._config.get('threewire', False)
		self._spi.mode = self._config.get('mode', 1)
			self._spi.max_speed_hz = self._config.get('frequency', 4000000)
			self._spi.bits_per_word = self._config.get('bits_per_word', 8)
			self._spi.cshigh = self._config.get('csigh', False)
			self._spi.no_cs  = self._config.get('no_cs', False)
			self._spi.lsbfirst = self._config.get('lsbfirst', False)
			self._spi.threewire = self._config.get('threewire', False)
			self._spi.mode = self._config.get('mode', 1)

		# If using a queue, start a thread to run the queue
		if self._should_use_queue():
			if self._dequeue_thread is None:
				self._dequeue_thread = threading.Thread(target = self._run_queue)
				self._dequeue_thread.start()
		else:
			if self._dequeue_thread is not None:
				self._dequeue_thread.join()
				self._dequeue_thread = None

		return None

	def initialize(self):
		self._reset_device()

		self._set_defaults()

		if not self._check_radio():
			return False
		return True

	def set_channel(self, channel):
		state = self.get_register_bits('radio_state')
		state['channel'] = channel

		self.put_register_bits('radio_state', state)

		return state

	def set_syncword(self, syncword):
	def set_syncword(self, syncword, force = False, _queue_instead_of_xmit = True):
		# If queuing is being used, just store this message
		if _queue_instead_of_xmit and self._should_use_queue():
			self._enqueue(syncword, None, None)
			return None

		# Do not set the syncword again if it's not needed
		if not force:
			if self._syncword is not None:
				if syncword == self._syncword:
					return None

		self._syncword = syncword

		packet_config = self.get_register_bits('packet_config')
		packet_config['syncword_len'] = len(syncword) - 1

		self.put_register_bits('packet_config', packet_config)

		if len(syncword) == 1:
			self.put_register("syncword_0", syncword[0])

			self.put_register("syncword_2", syncword[1])
			self.put_register("syncword_3", syncword[0])
		elif len(syncword) > 4:
			raise ValueError("SyncWord length must be less than 5")

		return None

	def fill_fifo(self, message, include_length = True):
	def fill_fifo(self, message, include_length = True, lock = True):
		new_message = [self._register_number('fifo')]
		if include_length:
			new_message = new_message + [len(message)]
		new_message = new_message + message
		log_message = [] + new_message

		# Transfer the message
		with self._get_mutex(lock):
		result = self._spi.xfer(new_message, self._spi.max_speed_hz, 10)
			result = self._spi.xfer(new_message, self._spi.max_speed_hz, 10)

		self._debug("Writing: {} = {}".format(log_message, result))

		return new_message

	def transmit(self, message, channel = None):
		if channel is None:
			state = self.get_register_bits('radio_state')
			channel = state['channel']
	def transmit(self, message, channel = None, lock = True, _queue_instead_of_xmit = True, post_delay = 0, syncword = None):
		# If we are using a radio transmit queue, just queue this message
		# (unless we are called from the dequeue procedure)
		if _queue_instead_of_xmit and self._should_use_queue():
			if syncword is None:
				syncword = self._syncword
			self._enqueue(syncword, message, channel, post_delay = post_delay)
			return True

		sent_packet = True

		with self._get_mutex(lock):
			# Set the syncword
			if syncword is not None:
				self.set_syncword(syncword, _queue_instead_of_xmit = False)

			if channel is None:
				state = self.get_register_bits('radio_state')
				channel = state['channel']

		# Initialize the transmitter
		self.put_register_bits('radio_state', {
			'tx_enabled': 0,
			'rx_enabled': 0,
			'channel': 0
		})
			# Initialize the transmitter
			self.put_register_bits('radio_state', {
				'tx_enabled': 0,
				'rx_enabled': 0,
				'channel': 0
			})

		self.put_register_bits('fifo_state', {
			'clear_read': 1,
			'clear_write': 1
		})
			self.put_register_bits('fifo_state', {
				'clear_read': 1,
				'clear_write': 1
			})

		# Format message to send to fifo
		self.fill_fifo(message, True)
			# Format message to send to fifo
			self.fill_fifo(message, include_length = True, lock = False)

		# Tell the radio to transmit the FIFO buffer to the specified channel
		self.put_register_bits('radio_state', {
			'tx_enabled': 1,
			'rx_enabled': 0,
			'channel': channel
		})
			# Tell the radio to transmit the FIFO buffer to the specified channel
			self.put_register_bits('radio_state', {
				'tx_enabled': 1,
				'rx_enabled': 0,
				'channel': channel
			})

		# Wait for buffer to empty
		# XXX: Untested
		while True:
			radio_status = self.get_register_bits('status')
			self._debug("radio_status={}".format(radio_status))
			# Wait for buffer to empty
			# XXX: Untested
			while True:
				radio_status = self.get_register_bits('status')
				self._debug("radio_status={}".format(radio_status))

			if radio_status['packet_flag'] == 1:
				break
			time.sleep(0.001)
				if radio_status['packet_flag'] == 1:
					break

				if radio_status['framer_status'] == 0:
					sent_packet = False
					break
				time.sleep(0.001)

		if post_delay != 0:
			time.sleep(post_delay)

		return sent_packet

	def multi_transmit(self, message, channels, retries = 3, delay = 0.1, syncword = None):
		delay = delay / len(channels)
		for channel in channels:
			for i in range(retries):
				if not self.transmit(message, channel, post_delay = delay, syncword = syncword):
					return False

		return True

	def _enqueue(self, syncword, message, channel, post_delay = 0.01):
		if channel not in self._channel_queue:
			self._channel_queue[channel] = []
			dispatch_time = time.time()
		else:
			last_item = self._channel_queue[channel][-1]
			dispatch_time = last_item['time'] + last_item['post_delay']

		self._channel_queue[channel].append({
			'syncword': syncword,
			'message': message,
			'channel': channel,
			'time': dispatch_time,
			'post_delay': post_delay,
			'transmitted': False
		})

		return None

	def _run_queue(self):
		self._debug("Started run_queue process")
		# Do not run the queue if we are using a queue
		if not self._should_use_queue():
			self._debug("Ending run_queue process, not using the queue")
			return None

		sleep_time = 0
		while True:
			time.sleep(sleep_time)
			item_count = self._run_queue_once()
			self._debug("Running the queue, {} items left".format(item_count))

			if item_count == 0:
				# If the queue is empty and we are no longer queuing
				# events, exit this function (which should be joined)
				if not self._should_use_queue():
					self._debug("Request to stop run_queue process, exiting")
					break

				# If there are no events, wait a bit
				# longer before trying again
				sleep_time = 0.5
				continue
	def multi_transmit(self, message, channels, retries = 3, delay = 0.1):
		for channel in channels:
			for i in range(retries):
				if not self.transmit(message, channel):
					return False
				if delay != 0:
					time.sleep(delay / retries)
		return True


			# If there are more events to process, try again in 1ms
			sleep_time = 0.001

		return None

	def _run_queue_once(self):
		now = time.time()
		to_transmit = []
		items_remaining = 0
		for channel in self._channel_queue:
			found_item_in_queue = False
			for item in self._channel_queue[channel]:
				if item['transmitted']:
					continue

				found_item_in_queue = True
				if item['time'] <= now:
					item['transmitted'] = True
					to_transmit.append(item)
					continue

				items_remaining += 1
			# If the channel has only transmitted items, clear it
			# out except for the last item (which will have a
			# record of when the next event should take place)
			if not found_item_in_queue:
				self._channel_queue[channel] = [self._channel_queue[channel][-1]]

		default_syncword = None

		with self._get_mutex():
			for item in to_transmit:
				syncword = item['syncword']
				message = item['message']
				channel = item['channel']

				if syncword is not None:
					default_syncword = syncword
				else:
					syncword = default_syncword

				if message is None or channel is None:
					continue

				for retry in range(3):
					if self.transmit(message, channel, lock = False, _queue_instead_of_xmit = False, syncword = syncword):
						break

		return items_remaining
		
	def start_listening(self, channel):
		# Initialize the receiver
		self.stop_listening()

		# Go into listening mode
		self.put_register_bits('radio_state', {
			'tx_enabled': 0,

			'clear_read': 1,
			'clear_write': 1
		})

		return True

	def receive(self, channel = None, wait = False, length = None, wait_time = 0.1):
		with self._get_mutex():
		if wait:
			if channel is None:
				state = self.get_register_bits('radio_state')
				channel = state['channel']
			if wait:
				if channel is None:
					state = self.get_register_bits('radio_state')
					channel = state['channel']

			self.start_listening(channel)
				self.start_listening(channel)

		message = []
			message = []

		while True:
			radio_status = self.get_register_bits('status')
			self._debug("radio_status={}".format(radio_status))
			if radio_status['packet_flag'] == 0:
				if wait:
					time.sleep(wait_time)
					continue
				else:
					return None
			while True:
				radio_status = self.get_register_bits('status')
				self._debug("radio_status={}".format(radio_status))
				if radio_status['packet_flag'] == 0:
					if wait:
						time.sleep(wait_time)
						continue
					else:
						self._unlock_radio()
						return None

			if radio_status['crc_error'] == 1:
				# Handle invalid packet ?
				self.start_listening(channel)
				continue
				if radio_status['crc_error'] == 1:
					# Handle invalid packet ?
					self.start_listening(channel)
					continue

			# Data is available, read it from the FIFO register
			# The first result will include the length
			# XXX *IF* length encoding is enabled ?
			fifo_data = self.get_register('fifo')
			message_length = fifo_data >> 8
				# Data is available, read it from the FIFO register
				# The first result will include the length
				# XXX *IF* length encoding is enabled ?
				fifo_data = self.get_register('fifo')
				message_length = fifo_data >> 8

			if message_length == 0:
				self.start_listening(channel)
				continue
				if message_length == 0:
					self.start_listening(channel)
					continue

			# Keep track of the total message length to truncate it
			final_message_length = message_length
				# Keep track of the total message length to truncate it
				final_message_length = message_length

			message += [fifo_data & 0xff]
			message_length -= 1
				message += [fifo_data & 0xff]
				message_length -= 1

			# Read subsequent bytes from the FIFO register until
			# there are no more bytes to read
			while message_length > 0:
				fifo_data = self.get_register('fifo')
				message += [fifo_data >> 8, fifo_data & 0xff]
				message_length -= 2
				# Read subsequent bytes from the FIFO register until
				# there are no more bytes to read
				while message_length > 0:
					fifo_data = self.get_register('fifo')
					message += [fifo_data >> 8, fifo_data & 0xff]
					message_length -= 2

			# Truncate the message to its final size, since we have
			# to read in 16-bit words, we may have an extra byte
			message = message[0:final_message_length]
			break
				# Truncate the message to its final size, since we have
				# to read in 16-bit words, we may have an extra byte
				message = message[0:final_message_length]
				break

		return message