Python LimitlessLED via RF

Top-level Files of 1e49925e09881dad
Login

Top-level Files of 1e49925e09881dad

Files in the top-level directory of check-in 1e49925e09881dad


Python LimitlessLED via RF

Control LimitlessLED bulbs through a directly attached radio. The radio object must have an interface with a "transmit" method that formats messages as an LT8900 would over the air.

API

Synopsis

limitlessled_rf.remote(radio, remote_type, remote_id, message_id = None, config = None) -> instance
limitlessled_rf.remote.raw_send_button(button_info) -> value
limitlessled_rf.remote.raw_read_button() -> dictionary
limitlessled_rf.remote.set_brightness(brightness, zone = None) -> boolean
limitlessled_rf.remote.set_color(rgb, zone = None) -> boolean
limitlessled_rf.remote.set_temperature(kelvins, zone = None) -> boolean
limitlessled_rf.remote.on(zone = None) -> boolean
limitlessled_rf.remote.off(zone = None, dim = True) -> boolean
limitlessled_rf.remote.max_brightness(zone = None) -> boolean
limitlessled_rf.remote.white(zone = None) -> boolean
limitlessled_rf.remote.pair(zone) -> boolean
limitlessled_rf.remote.unpair(zone) -> boolean

Constructor

Construct a LimitlessLED object that uses the specified radio to act as a specific numeric remote for a specific type of LimitlessLED bulb system.

The "radio" object is an LT8900 compatible radio interface -- for example the "lt8900_spi" package.

The "remote_type" parameter is a string which refers to the type of LimitlessLED bulb this remote can control. Valid values are: "rgbw" or "cct".

The "message_id" parameter allows you to set a default initial message_id. If this is not supplied a random value is generated.

The "config" parameter allows for overriding a bulbs configuration. Valid keys can be found in the "_remote_type_parameters_map" map.

instance.raw_send_button

Send a button event directly via the locally connected radio to a remote bulb.

The "button_info" dictionary contains at least the "button" key which identifies the button by name. Additional keys may be needed depending on the particular button.

instance.raw_read_button

Wait for a button to be pressed that the locally connected radio can read and then return that as a parsed "button_info" dictionary.

instance.set_brightness

Set the brightness for the bulbs paired to the specified zone. Brightness ranges from 0 (off) to 255 (maximum brightness).

If no zone is specified all bulbs attached to the remote are updated.

instance.set_color

Set the color for the bulbs paired to the specified zone. The "rgb" parameter is a 16-bit true-color value ranging from 0x000000 (black) to 0xffffff (white). Since LimitlessLED bulbs are not actually true-color, this will get mapped to a nearby color before sending it to the bulb. If the color sent is a shade of white, and the bulb supports white it will be translated into a brightness. Otherwise, brightness will not be altered.

If no zone is specified all bulbs attached to the remote are updated.

instance.set_temperature

Set the color temperature for the bulbs paired to the specified zone. The "kelvins" parameter refers to the color temperature, in kelvins, that the bulb should be configured to display. Since LimitlessLED bulbs do not support infinite color temperatures, it will clamped to the range supported and to the nearest color temperature supported before sending the command to the bulb.

If no zone is specified all bulbs attached to the remote are updated.

instance.on

Turn on bulbs in the specified zone.

If no zone is specified all bulbs attached to the remote are updated.

instance.off

Turn off bulbs in the specified zone.

If no zone is specified all bulbs attached to the remote are updated.

instance.white

Turn the bulbs in the specified zone to their white mode.

If no zone is specified all bulbs attached to the remote are updated.

instance.pair

Issue the bulb-specific kind of pairing sequence to pair a newly powered-on bulb to this remote on the specified zone.

instance.unpair

Issue the bulb-specific kind of unpairing sequence to unpair a newly powered-on bulb from this remote on the specified zone. The bulb must already be paired with this remote and in the zone before it can be unpaired. Once a bulb is unpaired from a given remote, it is unpaired from all remotes.

Example

#! /usr/bin/env python3

import random
import time

import gpiozero
import limitlessled_rf
import lt8900_spi

def init_radio():
	# Need to keep this attached to drive the line high -- if the object disappears then
	# the GPIO port gets reconfigured as an input port
	# Note: broadcom pin numbers are used
	reset_gpio = gpiozero.LED(24)
	reset_gpio.on()
	def reset_module_via_gpio():
		reset_gpio.off()
		time.sleep(0.1)
		reset_gpio.on()
		time.sleep(0.1)

	# LT8900 compatible radio
	radio = lt8900_spi.radio(0, 0, {
		'reset_command': reset_module_via_gpio,
		'reset_command_gpio': reset_gpio
	})

	if not radio.initialize():
		return None

	return radio

radio = init_radio()
remote = limitlessled_rf.remote(radio, 'rgbw', 0x51F0)

while True:
	remote.set_color(random.randint(0, 0xffffff))