File r34.1/lib/gnuplot.tex artifact 263bd9ed65 part of check-in 3519b83598


\documentstyle[11pt,reduce]{article}
\date{}
\title{GNUPLOT Interface for REDUCE}
\author{Herbert Melenk \\ 
Konrad--Zuse--Zentrum f\"ur Informationstechnik Berlin \\
E--mail: Melenk@sc.zib--berlin.de}
\begin{document}
\maketitle

\index{GNUPLOT package}
 
\section{Introduction}
The GUNPLOT system provides standard graphics output 
curves or surfaces which are defined by  
formulas and/or data sets. GNUPLOT supports a great variety of output devices
such as \verb+X-windows+, \verb+SUN tools+, 
\verb+VGA screen+, \verb+postscript+, \verb+pic+ \TeX.
The {\small REDUCE} GNUPLOT package lets one use the GNUPLOT
features directly from inside {\small REDUCE}, either for
the interactive display of curves/surfaces or for the production
of pictures on paper. 

This version supports hidden surface removal with GNUPLOT 3.2 or higher.
By default hidden surface removal is switched off for compatibility with
earlier versions of GNUPLOT which don't understand this option.
You can ask for hidden surface removal locally; a global switch on is
possible by adding a command line to $plotheader$ which now accepts
more than one commands encoded as a list of strings (see below).

 
\section{Requirements}
Requirements for the usage of GNUPLOT under REDUCE are:
\begin{enumerate}
\item A running version of GNUPLOT 3.0 or higher,
The actual version of GNUPLOT can be obtained via anonymous ftp
from one of the sites
\begin{itemize}
\item dartmouth.edu (129.170.16.4)
\item monu1.cc.monash.edu.au (130.194.1.101)
\item irisa.irisa.fr (131.254.2.3)
\end{itemize}

\item REDUCE based on a LISP system which supports either
      output pipes or a function `system' for invoking
      operating system commands.

All REDUCE 3.4 versions with PSL 3.4 running under UNIX and MS-DOS support
these functions; however, the virtual memory
must be large enough to support several big nested processes.
\end{enumerate}
 
\section{Installation}
For the installation of the {\small REDUCE} GNUPLOT
interface the following steps are to be performed:
\begin{enumerate}
\item  edit the strings in the top of the source file;
\begin{itemize}
\item{plotcommand:} a string with the command line to execute GNUPLOT;
under UNIX this may contain several commands separated by \`;', e.g.
a change of directory to the GNUPLOT binaries and a call of the
GNUPLOT main program, e.g.
\begin{verbatim}
   plotcommand := "cd /usr/users/gnuplot3.2; gnuplot";
\end{verbatim}
\item{plotdata and plotdata2:} two file names for eventual temporary 
data to be passed to GNUPLOT
\item{plotheader:} a string or list of strings to be inserted as initial
      command(s) for GNUPLOT; e.g. for MS-DOS you can set the terminal type:
\begin{verbatim}
       plotheader := "set terminal vgabios";
\end{verbatim}
or set a terminal type and a global mode
\begin{verbatim}
       plotheader := {"set terminal vgabios",
                      "set hidden3d"};
\end{verbatim}

\end{itemize}
You might as well set these variables later at
{\small REDUCE} runtime (e.g. in the .reducerc file).
Note that $plotheader$ will be evaluated in pipe mode only with the
first plot command and with a plot call following a $plotreset$.

\item compile the module by executing {\small REDUCE} with
the commands
\begin{verbatim}
     faslout "gnuplot";
     in "gnuplot.red"$
     faslend; 
\end{verbatim}
\end{enumerate}

\section{Call of GNUPLOT}
 
At {\small REDUCE} run time you enter
\begin{verbatim}
     load gnuplot;
\end{verbatim}

and then the commands \verb+PLOT(...)+ and \verb+PLOTRESET+ are
available.
 
GNUPLOT lets one display in two dimensions a graph of a
function $y=f(x)$ or a parameterized line $x=f_1(t),y=f_2(t)$.
For three dimensional objects a two dimensional projection can
be displayed, given either explicitly as $z=f(x,y)$ or 
parameterized as $x=f_1(u,v),y=f_2(u,v),z=f_3(u,v)$. Note
that the role of the names for the coordinates $x,y,z$ and the 
parameters $t$ resp $u,v$ are fixed. If your object to be
displayed contains different variables, you would have
to substitute them before, e.g. using the 
{\small REDUCE} operator SUB.

The functions $f_i()$ can be given as explicit algebraic 
expressions depending of the variables resp. parameters, or
for 2 dimensions as set of points (=pairs of numbers).
If given as expressions, they must
evaluate to numbers for all possible values of their
subscripts. The functions can be entered as equations
too - then the lefthand sides are ignored.
 
If one picture should contain more than one graph, e.g. x, x**2
and x**3, the operator $``family"$ is used, either in the
form
 
\begin{verbatim}
      family(x, x**2, x**3)
\end{verbatim}
or  in the form
\begin{verbatim}
      family({x, x**2, x**3})
\end{verbatim}
The second form lets you pass a list of expressions with an
undetermined length. Multiple graphs are aexowed only for
explicit forms.
 
The interface determines automatically from the used names 
which dimension to activate and whether
to use explicit or parameterized mode. All other features
have to be stated explicitly in the plot command as
additional options. Options can have the form
 
\begin{itemize}
\item{var = (l .. u)} where `var' is one of $x,y,z,u,v,t$;
   $l,u$ evaluate to numbers with $l<u$; this form defines a range for
   a variable/ parameter. If not bound explicitly, independent
   variables/ parameters are bound by the interval (-10 .. 10).
   Example:  \verb+x=(0 .. 5)+
\item{$keyword$} A simple GNUPLOT option can be entered directly
   as keyword. E.g.  \verb+polar+ corresponds to the GNUPLOT command
   \verb+`set polar'+. 
\item{$keyword=value$} A GNUPLOT option with value can be entered
   in this form. E.g.  \verb+title="Regression"+ corresponds to the
   GNUPLOT command \verb+`set title "Regression"'+. As value
   a number, an identifier or a string are allowed. If GNUPLOT
   requires a value composed from several items, the righthand
   side has to be enclosed in string quotes.
\end{itemize}
 
The following options are supported as keywords:

\begin{quotation}
           arrow noarrow contour nocontour
            autoscale noautoscale border noborder clip noclip
            polar nopolar grid nogrid key nokey label nolabel
            logscale nologscale surface nosurface tics time notime
            zeroaxis nozeroaxis
\end{quotation}

and for GNUPLOT 3.2 or higher
\begin{quotation}
            hidden3d nohidden3d
\end{quotation}

The following options are supported as equations:
 
\begin{quotation}
                 angles contour
                 arrow noarrow autoscale noautoscale cntrparam isosamples
                 label nolabel key logscale nologscale mapping offsets
                 samples size terminal tics ticslevel time view
                 xlabel xtics ylabel ytics zlabel ztics
\end{quotation}

The intersection of these sets is nonempty because GUNPLOT
allows for some options to appear with or without value.
The parameters for the command PLOT are processed from left
to right: a later option might override a previous one.

\section{Special Cases}

\subsection{GNUPLOT error}

If GNUPLOT is invoked directly by an output pipe (UNIX only),
an eventual error in the GNUPLOT input might cause GNUPLOT to
quit. As {\small REDUCE} is unable to detect this case, you
have to reset the whole application by calling the 
command \verb+PLOTRESET();+ afterwards new graphic output
can be produced. You might use this command as well for
getting rid of the graphical output window if you don't need
it any longer - it can be recreated later with a new call to
PLOT.

\subsection{Change of output device, Postscript}

The output device (default: graphics window) can be selected
for each call to plot by setting the variable terminal, e.g.
\begin{verbatim}
    plot(x**2,terminal=x);
\end{verbatim}
Once selected the output device remains active until the next
explicit selection resp. \verb+PLOTRESET();+. For generating
a printed picture the device ``postscript'' can be used. As
GNUPLOT then generates the postscript commands on standard
output, a special form of \verb+plotcommand+ should be used
which redirects output to a file or to the printer, e.g.
for UNIX 

\begin{verbatim}
    plotcommand := "gnuplot >/tmp/plotfile"$
\end{verbatim}

Note that a modification of \verb+plotcommand+ after a call
to plot will have an effect only after an additional call to
\verb+PLOTRESET();+. This command also closes a target
output file. With the above setting one could 
produce a printed picture by 

\begin{verbatim}
    plot(x**2,terminal=postscript);
    plotreset();
    system "lpr /tmp/plotfile"$
\end{verbatim}

Please consult the GNUPLOT manual for more Postscript options.

\subsection{Saving GNUPLOT command sequence}

If you want to use the internal GNUPLOT command sequence
more than once (e.g. for producing a picture for a publication),
you simply turn off the piped mode by setting \verb+OFF PLOT_PIPE+.
Then GNUPLOT is invoked via a command file, which you can save
and edit later for explicit calls of GNUPLOT.

\subsection{Permanent options}

Note that some of the options can survive the actual call
to GNUPLOT (e.g. `contour'). Only `nopolar' is set automatically,
if no `polar' appeared in the option list - so `polar'
is only local in scope.
Please do not try to set `parametric/noparametric'
as option: these are computed by the {\small REDUCE} interface implicitly.

\section{Examples}
 
\begin{verbatim}

plot(x**2);

plot(y=x**2,x=(1 .. 4),y=(0 .. 4),title="hugo");

plot(x**2,polar);

plot(z=x**2+y,x=(1 .. 2),y=(3 .. 4));

plot(x=u**2,y=v+1,z=u*v);

plot(x=t*sin(5*t),y=t*cos(5*t),t=(0 .. 10));

plot(x*y,contour);

plot(sin x * cos y,x=(-2 .. 2),y=(-2 .. 2));

plot(sin(x**2+y**2),x=(-1.5 .. 1.5),y=(-1.5 .. 1.5),contour);

plot((sin x + sin y)/(x**2 + y**2),x=(-0.1 .. 0.1), y=(-0.1 .. 0.1));

plot(x=u, y=v*cos (-u), z=v* sin(-u), u=(0 .. 3), v =(-0.1 .. 0.1),
    samples = 50);

plot(family(x,x**2,x**3), x=(0 .. 1));

plot({{0,0}, {0.2,1}, {0.4,-1}, {0.6,0}}, x=(0 .. 0.6));

plot(x**2*y**2,hidden3d);

\end{verbatim}

The file $gnuplot.tst$ contains some more examples.
 
\end{document}




REDUCE Historical
REDUCE Sourceforge Project | Historical SVN Repository | GitHub Mirror | SourceHut Mirror | NotABug Mirror | Chisel Mirror | Chisel RSS ]